Ground Operations Aerospace Language (GOAL). Volume 1: Study overview

NASA Technical Reports Server (NTRS)

1973-01-01

A series of NASA and Contractor studies sponsored by NASA/KSC resulted in a specification for the Ground Operations Aerospace Language (GOAL). The Cape Kennedy Facility of the IBM Corporation was given the responsibility, under existing contracts, to perform an analysis of the Language Specification, to design and develop a GOAL Compiler, to provide a specification for a data bank, to design and develop an interpretive code translator, and to perform associated application studies.

Operation of the J-series thruster using inert gas

NASA Technical Reports Server (NTRS)

Rawlin, V. K.

1982-01-01

Electron bombardment ion thrusters using inert gases are candidates for large space systems. The J-Series 30 cm diameter thruster, designed for operation up to 3 k-W with mercury, is at a state of technology readiness. The characteristics of operation with xenon, krypton, and argon propellants in a J-Series thruster with that obtained with mercury are compared. The performance of the discharge chamber, ion optics, and neutralizer and the overall efficiency as functions of input power and specific impulse and thruster lifetime were evaluated. As expected, the discharge chamber performance with inert gases decreased with decreasing atomic mass. Aspects of the J-Series thruster design which would require modification to provide operation at high power with insert gases were identified.

Designing Schools with Maintenance in Mind. [Brief No.] 6.

ERIC Educational Resources Information Center

Dunwoody, Thomas J.

This report is one of a series of briefs prepared by the American Institute of Architects National Committee on Architecture for Education addressing ways and means of reducing costs in the design and delivery of educational facilities. Specifically, this report discusses the advantages of designing with maintenance in mind, presents…

Teaching about Hazardous and Toxic Materials. Teaching Activities in Environmental Education Series.

ERIC Educational Resources Information Center

Disinger, John F.; Lisowski, Marylin

Designed to assist practitioners of both formal and non-formal settings, this 18th volume of the ERIC Clearinghouse for Science, Mathematics, and Environmental Education's Teaching Activities in Environmental Education series specifically focuses on the theme of hazardous and toxic materials. Initially, basic environmental concepts that deal with…

A Writing Teacher in the Physics Classroom.

ERIC Educational Resources Information Center

Kirkpatrick, Larry D.; Pittendrigh, Adele S.

1984-01-01

Describes a series of writing exercises specifically designed to improve students' comprehension of physics. Students are given a RAFT which defines their role, audience, format, and task. Format for writing essays focuses on key ideas, general ideas, specific cases, and additional insights. (JM)

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2012 CFR

2012-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2011 CFR

2011-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2014 CFR

2014-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

19 CFR 115.26 - Eligibility.

Code of Federal Regulations, 2013 CFR

2013-04-01

... CARGO CONTAINER AND ROAD VEHICLE CERTIFICATION PURSUANT TO INTERNATIONAL CUSTOMS CONVENTIONS Procedures for Approval of Containers by Design Type § 115.26 Eligibility. Any manufacturer of containers to be manufactured in a type series from standard design and specifications so that each container has identical...

Energy in Our Society.

ERIC Educational Resources Information Center

Philadelphia Electric Co., PA. Energy Education Advisory Council.

This publication is a series of 13 original classroom instructional packets and an additional 4 units adapted from National Science Teachers Association units. Each packet is designed to supplement specific existing subject curricula. Units have been designed for physics, chemistry, English, mathematics, general science and studies. Packets…

Bivariate analysis of floods in climate impact assessments.

PubMed

Brunner, Manuela Irene; Sikorska, Anna E; Seibert, Jan

2018-03-01

Climate impact studies regarding floods usually focus on peak discharges and a bivariate assessment of peak discharges and hydrograph volumes is not commonly included. A joint consideration of peak discharges and hydrograph volumes, however, is crucial when assessing flood risks for current and future climate conditions. Here, we present a methodology to develop synthetic design hydrographs for future climate conditions that jointly consider peak discharges and hydrograph volumes. First, change factors are derived based on a regional climate model and are applied to observed precipitation and temperature time series. Second, the modified time series are fed into a calibrated hydrological model to simulate runoff time series for future conditions. Third, these time series are used to construct synthetic design hydrographs. The bivariate flood frequency analysis used in the construction of synthetic design hydrographs takes into account the dependence between peak discharges and hydrograph volumes, and represents the shape of the hydrograph. The latter is modeled using a probability density function while the dependence between the design variables peak discharge and hydrograph volume is modeled using a copula. We applied this approach to a set of eight mountainous catchments in Switzerland to construct catchment-specific and season-specific design hydrographs for a control and three scenario climates. Our work demonstrates that projected climate changes have an impact not only on peak discharges but also on hydrograph volumes and on hydrograph shapes both at an annual and at a seasonal scale. These changes are not necessarily proportional which implies that climate impact assessments on future floods should consider more flood characteristics than just flood peaks. Copyright © 2017. Published by Elsevier B.V.

Mind over Matter: The Brain's Response to Drugs. Teacher's Guide. Revision.

ERIC Educational Resources Information Center

National Inst. on Drug Abuse (DHEW/PHS), Rockville, MD.

This teacher's guide is for the "Mind Over Matter" series, a neuroscience education series designed to encourage students in grades 5-9 to learn about the biological effects of drug abuse on the body and the brain. "Mind Over Matter" includes eight colorful, glossy magazines, each of which is devoted to a specific drug or drug…

A Guide for Planning Facilities for Occupational Preparation Programs for Dental Laboratory Technicians. Research Series No. 34.

ERIC Educational Resources Information Center

Macconnell, James D., And Others

The twelfth in a series also including guides for facilities for medical x-ray technologist, medical assistant, and medical secretary programs, the document is intended for use in the preparation of educational specifications for facilities for dental laboratory technician programs. Designed for use by those responsible for planning facilities,…

Technology Tools in the Information Age Classroom. Using Technology in the Classroom Series.

ERIC Educational Resources Information Center

Finkel, LeRoy

This book is designed for use in an introductory, college level course on educational technology, and no prior experience with computers or computing is assumed. The first of a series on technology in the classroom, the text provides a foundation for exploring more specific topics in greater depth. The book is divided into three…

Cluster: Metals. Course: Machine Shop. Research Project.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of 13 units is designed for use with an instructor in actual machine shop practice and is also keyed to audio visual and textual materials. Each unit contains a series of task packages which: specify prerequisites within the series (minimum is Unit 1); provide a narrative rationale for learning; list both general and specific objectives in…

What is the fundamental ion-specific series for anions and cations? Ion specificity in standard partial molar volumes of electrolytes and electrostriction in water and non-aqueous solvents† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c7sc02691a Click here for additional data file.

PubMed Central

Mazzini, Virginia

2017-01-01

The importance of electrolyte solutions cannot be overstated. Beyond the ionic strength of electrolyte solutions the specific nature of the ions present is vital in controlling a host of properties. Therefore ion specificity is fundamentally important in physical chemistry, engineering and biology. The observation that the strengths of the effect of ions often follows well established series suggests that a single predictive and quantitative description of specific-ion effects covering a wide range of systems is possible. Such a theory would revolutionise applications of physical chemistry from polymer precipitation to drug design. Current approaches to understanding specific-ion effects involve consideration of the ions themselves, the solvent and relevant interfaces and the interactions between them. Here we investigate the specific-ion effects trends of standard partial molar volumes and electrostrictive volumes of electrolytes in water and eleven non-aqueous solvents. We choose these measures as they relate to bulk properties at infinite dilution, therefore they are the simplest electrolyte systems. This is done to test the hypothesis that the ions alone exhibit a specific-ion effect series that is independent of the solvent and unrelated to surface properties. The specific-ion effects trends of standard partial molar volumes and normalised electrostrictive volumes examined in this work show a fundamental ion-specific series that is reproduced across the solvents, which is the Hofmeister series for anions and the reverse lyotropic series for cations, supporting the hypothesis. This outcome is important in demonstrating that ion specificity is observed at infinite dilution and demonstrates that the complexity observed in the manifestation of specific-ion effects in a very wide range of systems is due to perturbations of solvent, surfaces and concentration on the underlying fundamental series. This knowledge will guide a general understanding of specific-ion effects and assist in the development of a quantitative predictive theory of ion specificity. PMID:29147533

Sexual Harassment Prevention Initiatives: Quantitative and Qualitative Approaches

DTIC Science & Technology

2010-10-28

design , and the time series with nonequivalent control group design . The experimental research approach will randomly assign participants...Leedy & Ormrod, 2005). According to Fife- Schaw (2006) there are three quasi-experimental designs : the nonequivalent control group design , the time...that have controlled and isolated variables. A specific quantitative approach available to the researcher is the use of surveys. Surveys, in

A Child's Guide to Surviving in a Troubled Family. Breakthrough Strategies To Teach and Counsel Troubled Youth: Social Skills, School Skills, Coping Skills Lesson Series.

ERIC Educational Resources Information Center

Wells, Ruth Herman

This document is one of eight in a series of guides designed to help teach and counsel troubled youth. It differs from the others in the series in that it was written specifically for children who are struggling with serious family problems such as substance abuse, sexual abuse, domestic violence, and mental illness. The first of the 20 lessons in…

Representative sets of design hydrographs for ungauged catchments: A regional approach using probabilistic region memberships

NASA Astrophysics Data System (ADS)

Brunner, Manuela Irene; Seibert, Jan; Favre, Anne-Catherine

2018-02-01

Traditional design flood estimation approaches have focused on peak discharges and have often neglected other hydrograph characteristics such as hydrograph volume and shape. Synthetic design hydrograph estimation procedures overcome this deficiency by jointly considering peak discharge, hydrograph volume, and shape. Such procedures have recently been extended to allow for the consideration of process variability within a catchment by a flood-type specific construction of design hydrographs. However, they depend on observed runoff time series and are not directly applicable in ungauged catchments where such series are not available. To obtain reliable flood estimates, there is a need for an approach that allows for the consideration of process variability in the construction of synthetic design hydrographs in ungauged catchments. In this study, we therefore propose an approach that combines a bivariate index flood approach with event-type specific synthetic design hydrograph construction. First, regions of similar flood reactivity are delineated and a classification rule that enables the assignment of ungauged catchments to one of these reactivity regions is established. Second, event-type specific synthetic design hydrographs are constructed using the pooled data divided by event type from the corresponding reactivity region in a bivariate index flood procedure. The approach was tested and validated on a dataset of 163 Swiss catchments. The results indicated that 1) random forest is a suitable classification model for the assignment of an ungauged catchment to one of the reactivity regions, 2) the combination of a bivariate index flood approach and event-type specific synthetic design hydrograph construction enables the consideration of event types in ungauged catchments, and 3) the use of probabilistic class memberships in regional synthetic design hydrograph construction helps to alleviate the problem of misclassification. Event-type specific synthetic design hydrograph sets enable the inclusion of process variability into design flood estimation and can be used as a compromise between single best estimate synthetic design hydrographs and continuous simulation studies.

What's in a Name? The Incorrect Use of Case Series as a Study Design Label in Studies Involving Dogs and Cats.

PubMed

Sargeant, J M; O'Connor, A M; Cullen, J N; Makielski, K M; Jones-Bitton, A

2017-07-01

Study design labels are used to identify relevant literature to address specific clinical and research questions and to aid in evaluating the evidentiary value of research. Evidence from the human healthcare literature indicates that the label "case series" may be used inconsistently and inappropriately. Our primary objective was to determine the proportion of studies in the canine and feline veterinary literature labeled as case series that actually corresponded to descriptive cohort studies, population-based cohort studies, or other study designs. Our secondary objective was to identify the proportion of case series in which potentially inappropriate inferential statements were made. Descriptive evaluation of published literature. One-hundred published studies (from 19 journals) labeled as case series. Studies were identified by a structured literature search, with random selection of 100 studies from the relevant citations. Two reviewers independently characterized each study, with disagreements resolved by consensus. Of the 100 studies, 16 were case series. The remaining studies were descriptive cohort studies (35), population-based cohort studies (36), or other observational or experimental study designs (13). Almost half (48.8%) of the case series or descriptive cohort studies, with no control group and no formal statistical analysis, included inferential statements about the efficacy of treatment or statistical significance of potential risk factors. Authors, peer-reviewers, and editors should carefully consider the design elements of a study to accurately identify and label the study design. Doing so will facilitate an understanding of the evidentiary value of the results. Copyright © 2017 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

AUTOMOTIVE DIESEL MAINTENANCE 2. UNIT VII, AUTOMATIC TRANSMISSIONS--ALLISON, TORQUMATIC SERIES 5960 AND 6060 (PART I).

ERIC Educational Resources Information Center

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 25-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF SPECIFIC MODELS OF AUTOMATIC TRANSMISSIONS USED ON DIESEL POWERED VEHICLES. TOPICS ARE (1) GENERAL SPECIFICATION DATA, (2) OPTIONS FOR VARIOUS APPLICATIONS, (3) ROAD TEST INSTRUCTIONS, (4) IDENTIFICATION AND SPECIFICATION DATA, (5) ALLISON…

49 CFR 178.274 - Specifications for UN portable tanks.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and 178.277, as applicable. Design type means a portable tank or series of portable tanks made of... the top of the shell during the hydraulic pressure test equal to not less than 1.5 times the design... be designed and constructed to withstand a hydraulic test pressure of not less than 1.5 times the...

49 CFR 178.274 - Specifications for UN portable tanks.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and 178.277, as applicable. Design type means a portable tank or series of portable tanks made of... the top of the shell during the hydraulic pressure test equal to not less than 1.5 times the design... be designed and constructed to withstand a hydraulic test pressure of not less than 1.5 times the...

System design projects for undergraduate design education

NASA Technical Reports Server (NTRS)

Batill, S. M.; Pinkelman, J.

1993-01-01

Design education has received considerable in the recent past. This paper is intended to address one aspect of undergraduate design education and that is the selection and development of the design project for a capstone design course. Specific goals for a capstone design course are presented and their influence on the project selection are discussed. The evolution of a series of projects based upon the design of remotely piloted aircraft is presented along with students' perspective on the capstone experience.

Specification for strontium-90 500-watt(e) radioisotopic thermoelectric generator

NASA Astrophysics Data System (ADS)

Hammel, T.; Himes, J.; Lieberman, A.; McGrew, J. W.; Owings, D.; Schumann, F.

1983-04-01

A conceptual design for a demonstration 500-watt(e) radioisotopic thermoelectric generator (RTG) was created. The design effort was divided into two tasks, viz., create a design specification for a capsule strenth member that utilizes a standard Strontium 90 fluoride filled WESF inner liner, and create a conceptual design for a 500-watt(e) RTG. The strength member specification was designed to survive an external pressure of 24,500 psi and meet the requirements of special form radioisotope heat sources. Therefore the capsule is if desired, licensed for domestic and international transport. The design for the RTG features a radioisotopic heat source, an array of nine capsules in a tungsten biological shield, four current technology series connected thermoelectric conversion modules, low conductivity thermal insulation, and a passive finned housing radiator for waste heat dissipation. The preliminary RTG specification formulated previous to contract award was met or exceeded.

Learning by Doing: Concepts and Models for Service-Learning in Accounting. AAHE's Series on Service-Learning in the Disciplines.

ERIC Educational Resources Information Center

Rama, D. V., Ed.

This volume is part of a series of 18 monographs on service learning and the academic disciplines. It is designed to (1) develop a theoretical framework for service learning in accounting consistent with the goals identified by accounting educators and the recent efforts toward curriculum reform, and (2) describe specific active learning…

Control of small phased-array antennas

NASA Technical Reports Server (NTRS)

Doland, G. D.

1978-01-01

Series of reports, patent descriptions, calculator programs, and other literature describes antenna control and steering apparatus for seven-element phased array. Though series contains information specific to particular system, it illustrates methods that can be applied to antennas with greater or fewer numbers of elements. Included are programs for calculating beam parameters and design functions and information to interfacing digital controller to beam-steering apparatus.

40 CFR Appendix B to Part 60 - Performance Specifications

Code of Federal Regulations, 2012 CFR

2012-07-01

... manufacturers comply with a comprehensive series of design and performance specifications and test procedures to... must periodically select and test an opacity monitor, that is representative of a group of monitors... program are used. One Run may include results for more than one test condition. Constant emissions means...

40 CFR Appendix B to Part 60 - Performance Specifications

Code of Federal Regulations, 2011 CFR

2011-07-01

... manufacturers comply with a comprehensive series of design and performance specifications and test procedures to... must periodically select and test an opacity monitor, that is representative of a group of monitors... program are used. One Run may include results for more than one test condition. Constant emissions means...

40 CFR Appendix B to Part 60 - Performance Specifications

Code of Federal Regulations, 2013 CFR

2013-07-01

... manufacturers comply with a comprehensive series of design and performance specifications and test procedures to... must periodically select and test an opacity monitor, that is representative of a group of monitors... program are used. One Run may include results for more than one test condition. Constant emissions means...

76 FR 22364 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-21

... of 2012. The SIPP is a household-based survey designed as a continuous series of national panels. The... DEPARTMENT OF COMMERCE Census Bureau Proposed Information Collection; Comment Request; Survey of... with questions designed to address specific needs in complementary subject areas. The 2012 SIPP- EHC...

75 FR 35764 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-23

... survey designed as a continuous series of national panels. The SIPP is molded around a central ``core... DEPARTMENT OF COMMERCE U.S. Census Bureau Proposed Information Collection; Comment Request; Survey... supplemented with questions designed to address specific needs. Examples of these types of questions include...

78 FR 15001 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-08

... complete night time missions down to starlight and extreme low light conditions. The AN/AVS-9 is designed... responds to threats autonomously with a specific series of measures designed to protect the aircraft from... without interrupting his field of view through the cockpit canopy, the system uses a magnetic transmitter...

Development of the LSF95xx 2nd generation flexure bearing coolers

NASA Astrophysics Data System (ADS)

Mullie, J. C.; Bruins, P. C.; Benschop, T.; Meijers, M.

2005-05-01

Thales Cryogenics has been working on high reliability cryocoolers since 1997. During this period two cooler series have been developed, the LSF91xx series for cooling powers up to 3W at 80K and the LSF93xx series for cooling powers up to 8W at 80K. As a result of several design improvements, it was possible to decrease the length and mass of our flexure-bearing coolers. These improvements have been applied in the new LSF95xx series. With the length and mass reduction, the LSF95xx complies with the SADA II specification with respect to envelope and mass. Based on this, Thales Cryogenics is the first manufacturer offering a full flexure-bearing supported cooler that fits within the SADA II envelope. By using a moving magnet configuration in all our flexure-bearing coolers, the risk with respect to contamination problems due to out-gassing has been diminished because the coils are not part of the helium circuit. Furthermore, all connections in the LSF95xx are laser-welded, which means that there is no additional locking required inside the cooler. By using a different magnet design, no magnet segments have to be glued together, which decreases the risk of out-gassing and increases the reliability even more. This paper describes the trade-offs that have been considered in the design phase, and gives a detailed overview of the test results, the status of the qualification program and the resulting specification of the LSF95xx cooler series.

Design verification of SIFT

NASA Technical Reports Server (NTRS)

Moser, Louise; Melliar-Smith, Michael; Schwartz, Richard

1987-01-01

A SIFT reliable aircraft control computer system, designed to meet the ultrahigh reliability required for safety critical flight control applications by use of processor replications and voting, was constructed for SRI, and delivered to NASA Langley for evaluation in the AIRLAB. To increase confidence in the reliability projections for SIFT, produced by a Markov reliability model, SRI constructed a formal specification, defining the meaning of reliability in the context of flight control. A further series of specifications defined, in increasing detail, the design of SIFT down to pre- and post-conditions on Pascal code procedures. Mechanically checked mathematical proofs were constructed to demonstrate that the more detailed design specifications for SIFT do indeed imply the formal reliability requirement. An additional specification defined some of the assumptions made about SIFT by the Markov model, and further proofs were constructed to show that these assumptions, as expressed by that specification, did indeed follow from the more detailed design specifications for SIFT. This report provides an outline of the methodology used for this hierarchical specification and proof, and describes the various specifications and proofs performed.

Entering Adulthood: Balancing Stress for Success. A Curriculum for Grades 9-12. Contemporary Health Series. [Teacher's Guide and] Student Workbook.

ERIC Educational Resources Information Center

Hart, Susan J.

This curriculum guide provides high school students with specific tools to develop insights, attitudes and life skills they need to meet life's challenges and covers critical health and family life topics. It is part of a series designed to provide educators with the curricular tools necessary to challenge students to take personal responsibility…

Service the Carburetor Air Cleaner. Fuel System. Student Manual 1. Small Engine Repair Series. First Edition.

ERIC Educational Resources Information Center

Hill, Pamela

This student manual, part of a small-engine repair series on servicing fuel systems, is designed for use by special needs students in Texas. The manual explains in pictures and short sentences, written on a low reading level, the job of servicing carburetor air cleaners. Along with the steps of this repair job, specific safety and caution…

The first of a series of high efficiency, high bmep, turbocharged two-stroke cycle diesel engines; the general motors EMD 645FB engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kotlin, J.J.; Dunteman, N.R.; Scott, D.I.

1983-01-01

The current Electro-Motive Division 645 Series turbocharged engines are the Model FB and EC. The FB engine combines the highest thermal efficiency with the highest specific output of any EMD engine to date. The FB Series incorporates 16:1 compression ratio with a fire ring piston and an improved turbocharger design. Engine components included in the FB engine provide very high output levels with exceptional reliability. This paper also describes the performance of the lower rated Model EC engine series which feature high thermal efficiency and utilize many engine components well proven in service and basic to the Model FB Series.

76 FR 79650 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-22

... household-based survey designed as a continuous series of national panels. New panels are introduced every... with questions designed to address specific needs, such as obtaining information on household members... economic well-being and permitted changes in these levels to be measured over time. The 2008 panel is...

29 CFR 1926.906 - Initiation of explosive charges-electric blasting.

Code of Federal Regulations, 2013 CFR

2013-07-01

...” position at all times, except when firing. It shall be so designed that the firing lines to the cap circuit... blasting machine shall not be in excess of its rated capacity. Furthermore, in primary blasting, a series..., shall use only blasting galvanometers or other instruments that are specifically designed for this...

29 CFR 1926.906 - Initiation of explosive charges-electric blasting.

Code of Federal Regulations, 2014 CFR

2014-07-01

...” position at all times, except when firing. It shall be so designed that the firing lines to the cap circuit... blasting machine shall not be in excess of its rated capacity. Furthermore, in primary blasting, a series..., shall use only blasting galvanometers or other instruments that are specifically designed for this...

29 CFR 1926.906 - Initiation of explosive charges-electric blasting.

Code of Federal Regulations, 2012 CFR

2012-07-01

...” position at all times, except when firing. It shall be so designed that the firing lines to the cap circuit... blasting machine shall not be in excess of its rated capacity. Furthermore, in primary blasting, a series..., shall use only blasting galvanometers or other instruments that are specifically designed for this...

29 CFR 1926.906 - Initiation of explosive charges-electric blasting.

Code of Federal Regulations, 2011 CFR

2011-07-01

...” position at all times, except when firing. It shall be so designed that the firing lines to the cap circuit... blasting machine shall not be in excess of its rated capacity. Furthermore, in primary blasting, a series..., shall use only blasting galvanometers or other instruments that are specifically designed for this...

76 FR 24457 - Proposed Information Collection; Comment Request; Survey of Income and Program Participation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

... the SIPP, which is a household-based survey designed as a continuous series of national panels. New... the panel. The core is supplemented with questions designed to address specific needs, such as... be measured over time. The 2008 panel is currently scheduled for approximately 6 years and will...

77 FR 22042 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-12

... investor confidence and market integrity, the Exchange designed the MQP Program to be highly transparent...), respectively. Background The proposed Market Quality Program is a voluntary program designed to promote market... obligations of listed Companies. The Rule 5300, 5400, and 5500 Series contain the specific quantitative...

The Transport of Ions Across Plant Cell Membranes.

ERIC Educational Resources Information Center

Baker, D. A.

1981-01-01

Presented is one of a series of articles designed to help science teachers keep current on ideas in specific areas of biology. This article provides information about ion transport in plant cells. (PB)

Preventing youth access to alcohol: outcomes from a multi-community time-series trial*.

PubMed

Wagenaar, Alexander C; Toomey, Traci L; Erickson, Darin J

2005-03-01

AIMS/INTERVENTION: The Complying with the Minimum Drinking Age project (CMDA) is a community trial designed to test effects of two interventions designed to reduce alcohol sales to minors: (1) training for management of retail alcohol establishments and (2) enforcement checks of alcohol establishments. CMDA is a multi-community time-series quasi-experimental trial with a nested cohort design. CMDA was implemented in 20 cities in four geographic areas in the US Midwest. The core outcome, propensity for alcohol sales to minors, was directly tested with research staff who attempted to purchase alcohol without showing age identification using a standardized protocol in 602 on-premise and 340 off-premise alcohol establishments. Data were collected every other week in all communities over 4 years. Mixed-model regression and Box-Jenkins time-series analyses were used to assess short- and long-term establishment-specific and general community-level effects of the two interventions. Effects of the training intervention were mixed. Specific deterrent effects were observed for enforcement checks, with an immediate 17% reduction in likelihood of sales to minors. These effects decayed entirely within 3 months in off-premise establishments and to an 8.2% reduction in on-premise establishments. Enforcement checks prevent alcohol sales to minors. At the intensity levels tested, enforcement primarily affected specific establishments checked, with limited diffusion to the whole community. Finally, most of the enforcement effect decayed within 3 months, suggesting that a regular schedule of enforcement is necessary to maintain deterrence.

Design data brochure for CSI series V solar heating system

NASA Technical Reports Server (NTRS)

1978-01-01

Generalized information on system configuration, system sizing, and mechanical layout is presented to assist the architect or designer in preparing construction drawings and specifications for the installation of the CSI integrated solar heating systems. Efficiency in space utilization of a full length collector and the importance of proper sizing of the collector array are among the topics discussed. Details of storage and transport subsystems are provided along with drawings and specifications of all components of the CSI system.

Science Library of Test Items. Volume Eight. Mastery Testing Program. Series 3 & 4 Supplements to Introduction and Manual.

ERIC Educational Resources Information Center

New South Wales Dept. of Education, Sydney (Australia).

Continuing a series of short tests aimed at measuring student mastery of specific skills in the natural sciences, this supplementary volume includes teachers' notes, a users' guide and inspection copies of test items 27 to 50. Answer keys and test scoring statistics are provided. The items are designed for grades 7 through 10, and a list of the…

Replace the Carburetor Diaphragm. Pulsa-Jet Style with Automatic Choke. Fuel System. Student Manual 2. Small Engine Repair Series. First Edition.

ERIC Educational Resources Information Center

Hill, Pamela

This student manual, part of a small-engine repair series on servicing fuel systems, is designed for use by special needs students in Texas. The manual explains in pictures and short sentences, written on a low reading level, the job of replacing carburetor diaphragms. Along with the steps of this repair job, specific safety and caution…

Service the Two-Piece Flo-Jet Carburetor. Fuel System. Student Manual 3. Small Engine Repair Series. First Edition.

ERIC Educational Resources Information Center

Hill, Pamela

This student manual, part of a small-engine repair series on servicing fuel systems, is designed for use by special needs students in Texas. The manual explains in pictures and short sentences, written on a low reading level, the job of servicing two-piece flo-jet carburetors. Along with the steps of this repair job, specific safety and caution…

New angles on energy correlation functions

DOE PAGES

Moult, Ian; Necib, Lina; Thaler, Jesse

2016-12-29

Jet substructure observables, designed to identify specific features within jets, play an essential role at the Large Hadron Collider (LHC), both for searching for signals beyond the Standard Model and for testing QCD in extreme phase space regions. In this paper, we systematically study the structure of infrared and collinear safe substructure observables, defining a generalization of the energy correlation functions to probe n-particle correlations within a jet. These generalized correlators provide a flexible basis for constructing new substructure observables optimized for specific purposes. Focusing on three major targets of the jet substructure community — boosted top tagging, boosted W/Z/Hmore » tagging, and quark/gluon discrimination — we use power-counting techniques to identify three new series of powerful discriminants: M i, N i, and U i. The Mi series is designed for use on groomed jets, providing a novel example of observables with improved discrimination power after the removal of soft radiation. The N i series behave parametrically like the N -subjettiness ratio observables, but are defined without respect to subjet axes, exhibiting improved behavior in the unresolved limit. Finally, the U i series improves quark/gluon discrimination by using higher-point correlators to simultaneously probe multiple emissions within a jet. Taken together, these observables broaden the scope for jet substructure studies at the LHC.« less

New angles on energy correlation functions

NASA Astrophysics Data System (ADS)

Moult, Ian; Necib, Lina; Thaler, Jesse

2016-12-01

Jet substructure observables, designed to identify specific features within jets, play an essential role at the Large Hadron Collider (LHC), both for searching for signals beyond the Standard Model and for testing QCD in extreme phase space regions. In this paper, we systematically study the structure of infrared and collinear safe substructure observables, defining a generalization of the energy correlation functions to probe n-particle correlations within a jet. These generalized correlators provide a flexible basis for constructing new substructure observables optimized for specific purposes. Focusing on three major targets of the jet substructure community — boosted top tagging, boosted W/Z/H tagging, and quark/gluon discrimination — we use power-counting techniques to identify three new series of powerful discriminants: M i , N i , and U i . The M i series is designed for use on groomed jets, providing a novel example of observables with improved discrimination power after the removal of soft radiation. The N i series behave parametrically like the N -subjettiness ratio observables, but are defined without respect to subjet axes, exhibiting improved behavior in the unresolved limit. Finally, the U i series improves quark/gluon discrimination by using higher-point correlators to simultaneously probe multiple emissions within a jet. Taken together, these observables broaden the scope for jet substructure studies at the LHC.

Hooked on You.

ERIC Educational Resources Information Center

Sevier, Robert

1988-01-01

Most successful yield strategies use a series of messages specifically designed to meet the informational and emotional needs of students in the final decision-making stages. Techniques to try include: brochures, videotapes, handwritten postscripts, posters, and phone campaigns. (MLW)

W-026, Waste Receiving and Processing Facility data management system validation and verification report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palmer, M.E.

1997-12-05

This V and V Report includes analysis of two revisions of the DMS [data management system] System Requirements Specification (SRS) and the Preliminary System Design Document (PSDD); the source code for the DMS Communication Module (DMSCOM) messages; the source code for selected DMS Screens, and the code for the BWAS Simulator. BDM Federal analysts used a series of matrices to: compare the requirements in the System Requirements Specification (SRS) to the specifications found in the System Design Document (SDD), to ensure the design supports the business functions, compare the discreet parts of the SDD with each other, to ensure thatmore » the design is consistent and cohesive, compare the source code of the DMS Communication Module with the specifications, to ensure that the resultant messages will support the design, compare the source code of selected screens to the specifications to ensure that resultant system screens will support the design, compare the source code of the BWAS simulator with the requirements to interface with DMS messages and data transfers relating to the BWAS operations.« less

The Pressure Cooker: A Module on the Properties of Matter. Tech Physics Series.

ERIC Educational Resources Information Center

Technical Education Research Center, Cambridge, MA.

Experiments to provide an understanding of the principles related to the pressure cooker are presented. Objectives included are designed to provide the learner with the ability to calibrate a thermistor for measuring temperature; explain the meaning of latent and specific heat; calculate latent and specific heat; use a Bourdon tube pressure gauge…

Lecture Notes on Human Anatomy. Part Two, Fourth Edition.

ERIC Educational Resources Information Center

Conrey, Kathleen

During the process of studying the specific course content of human anatomy, students are being educated to expand their vocabulary, deal successfully with complex tasks, and learn a specific way of thinking. This is the second volume in a set of notes which are designed to accompany a lecture series in human anatomy. This volume includes…

[Parenting Information: Teenagers. Informacion Para los Padres: Sobre los Jovenes.

ERIC Educational Resources Information Center

Moreno, Steve

These four booklets are devoted specifically to the concerns of parents and their teenage children and are part of a series of 22 booklets designed specifically to help parents understand their children and help them to learn. "Parents--Learn about Your Teenager" (booklet #6) explains the changes which occur during the teen years and the…

Lecture Notes on Human Anatomy. Part One, Fourth Edition.

ERIC Educational Resources Information Center

Conrey, Kathleen

During the process of studying the specific course content of human anatomy, students are being educated to expand their vocabulary, deal successfully with complex tasks, and use a specific way of thinking. This is the first volume in a set of notes which are designed to accompany a lecture series in human anatomy. This volume includes discussions…

Medical Requirements for Ambulance Design and Equipment. Emergency Health Series.

ERIC Educational Resources Information Center

National Academy of Sciences - National Research Council, Washington, DC. Div. of Medical Sciences.

A vehicle must meet certain specific requirements to be classified as an ambulance if it is to satisfy the demands of the physician in terms of emergency care for which properly trained ambulance attendants can be held responsible. Developed by professional and lay experts for use by automotive designers and manufacturing, this publication would…

Future Technology Workshop: A Collaborative Method for the Design of New Learning Technologies and Activities

ERIC Educational Resources Information Center

Vavoula, Giasemi N.; Sharples, Mike

2007-01-01

We describe the future technology workshop (FTW), a method whereby people with everyday knowledge or experience in a specific area of technology use (such as using digital cameras) envision and design the interactions between current and future technology and activity. Through a series of structured workshop sessions, participants collaborate to…

The Education of the Active Televiewer of School Age.

ERIC Educational Resources Information Center

Munoz, Patricio Calderon; Torres, Miguel Reyes

In response to a series of problem symptoms related to the influence of television on students, a team of professors at the Universidad de Playa Ancha de Ciencias de la Educacion in Chile undertook a project designed to train television viewers to become critical viewers of the medium. Specific objectives of the project included: (1) to design a…

How Plants Make Light Work of Growth.

ERIC Educational Resources Information Center

Kendrick, R. E.

1981-01-01

Presented is one of a series of articles designed to help science teachers keep current on ideas in specific areas in biology. Contained is information on how plants use light for growth, seed germination, and flowering. (PB)

Interrupted time series design: a useful approach for studying interventions targeting participation.

PubMed

Anaby, Dana; Lal, Shalini; Huszczynski, Justine; Maich, Jana; Rogers, Jade; Law, Mary

2014-11-01

Comparative effectiveness research (CER) strives for evidence to inform clinical decisions for specific clients in typical health care settings. While the randomized controlled trial (RCT) is well-aligned with the objectives of CER, this design may not be feasible or applicable to all research questions, particularly those pertaining to clinical decision making and individually based change. It is important, therefore, to consider alternative approaches, especially when studying complex and subjective outcomes such as children's participation. We propose the use of interrupted time series (ITS) quasi-experimental design for its potential application in determining the effectiveness of participation-focused interventions. In this perspective, ITS design is described, ascertaining its advantages and limitations, and suggestions are provided to overcome challenges to implementation. Results of a case study using the ITS approach to evaluate changes in participation of an adolescent with physical disabilities are described. Finally, strategies to implement this design in practice are suggested.

Tesoros de mi raza: Programa de lecture y ensenanza del lenguaje (Treasures of My Culture: Reading and Teaching Program for Language Instruction).

ERIC Educational Resources Information Center

Santos, Richard G.; And Others

This teacher's guide, reader and workbook are part of a series of bilingual instructional materials designed for the fourth, fifth, and sixth grades. The present materials are specifically for fourth graders. The goal of the series is to teach Spanish by means of stories that present historical and cultural facts and aspects of the daily life of a…

A scan statistic for identifying optimal risk windows in vaccine safety studies using self-controlled case series design.

PubMed

Xu, Stanley; Hambidge, Simon J; McClure, David L; Daley, Matthew F; Glanz, Jason M

2013-08-30

In the examination of the association between vaccines and rare adverse events after vaccination in postlicensure observational studies, it is challenging to define appropriate risk windows because prelicensure RCTs provide little insight on the timing of specific adverse events. Past vaccine safety studies have often used prespecified risk windows based on prior publications, biological understanding of the vaccine, and expert opinion. Recently, a data-driven approach was developed to identify appropriate risk windows for vaccine safety studies that use the self-controlled case series design. This approach employs both the maximum incidence rate ratio and the linear relation between the estimated incidence rate ratio and the inverse of average person time at risk, given a specified risk window. In this paper, we present a scan statistic that can identify appropriate risk windows in vaccine safety studies using the self-controlled case series design while taking into account the dependence of time intervals within an individual and while adjusting for time-varying covariates such as age and seasonality. This approach uses the maximum likelihood ratio test based on fixed-effects models, which has been used for analyzing data from self-controlled case series design in addition to conditional Poisson models. Copyright © 2013 John Wiley & Sons, Ltd.

Toward identifying specification requirements for digital bone-anchored prosthesis design incorporating substructure fabrication: a pilot study.

PubMed

Eggbeer, Dominic; Bibb, Richard; Evans, Peter

2006-01-01

This paper is the first in a series that aims to identify the specification requirements for advanced digital technologies that may be used to design and fabricate complex, soft tissue facial prostheses. Following a review of previously reported techniques, appropriate and currently available technologies were selected and applied in a pilot study. This study uses a range of optical surface scanning, computerized tomography, computer-aided design, and rapid prototyping technologies to capture, design, and fabricate a bone-anchored auricular prosthesis, including the retentive components. The techniques are assessed in terms of their effectiveness, and the results are used to identify future research and specification requirements to direct developments. The case study identifies that while digital technologies may be used to design implant-retained facial prostheses, many limitations need to be addressed to make the techniques clinically viable. It also identifies the need to develop a more robust specification that covers areas such as resolution, accuracy, materials, and design, against which potential technologies may be assessed. There is a need to develop a specification against which potential technologies may be assessed for their suitability in soft tissue facial prosthetics. The specification will be developed using further experimental research studies.

Visualisation and interaction design solutions to address specific demands in shared home care.

PubMed

Scandurra, Isabella; Hägglund, Maria; Koch, Sabine

2006-01-01

When care professionals from different organisations are involved in patient care, their different views on the care process may not be meaningfully integrated. To use visualisation and interaction design solutions addressing the specific demands of shared care in order to support a collaborative work process. Participatory design, comprising interdisciplinary seminar series with real users and iterative prototyping, was applied. A set of interaction and visualisation design solutions to address care professionals' requirements in shared home care is presented, introducing support for identifying origin of information, holistic presentation of information, user group specific visualisation, avoiding cognitive overload, coordination of work and planning, and quick overviews. The design solutions are implemented in an integrated virtual health record system supporting cooperation and coordination in shared home care for the elderly. The described requirements are, however, generalized to comprise all shared care work. The presented design considerations allow healthcare professionals in different organizations to share patient data on mobile devices. Visualization and interaction design facilitates specific work situations and assists in handling specific demands in shared care. The user interface is adapted to different user groups with similar yet distinct needs. Consequently different views supporting cooperative work and presenting shared information in holistic overviews are developed.

Laboratory Instructions and Study Guide for Human Anatomy. Part Two, Fourth Edition.

ERIC Educational Resources Information Center

Conrey, Kathleen

During the process of studying the specific course content of human anatomy, students are being educated to expand their vocabulary, learn to deal successfully with complex tasks, and use a specific way of thinking. This is the second volume in a set of laboratory instructions and study notes which are designed to accompany a lecture series in…

[Family Participation in Children's Education. Envolvimiento de los Padres en la Educacion de los Ninos.

ERIC Educational Resources Information Center

Moreno, Steve

These five booklets on parent involvement in education are part of a series of 22 booklets designed specifically to help them to learn. In "Parents: Your School Improvement Can Help Your Child" (booklet #4), the school setting is explained and specific recommendations are made about parental involvement in the school and how children can…

Peer Review-Based Scripted Collaboration to Support Domain-Specific and Domain-General Knowledge Acquisition in Computer Science

ERIC Educational Resources Information Center

Demetriadis, Stavros; Egerter, Tina; Hanisch, Frank; Fischer, Frank

2011-01-01

This study investigates the effectiveness of using peer review in the context of scripted collaboration to foster both domain-specific and domain-general knowledge acquisition in the computer science domain. Using a one-factor design with a script and a control condition, students worked in small groups on a series of computer science problems…

Laboratory Instructions and Study Guide for Human Anatomy. Part One, Fourth Edition.

ERIC Educational Resources Information Center

Conrey, Kathleen

During the process of studying the specific course content of human anatomy, students are being educated to expand their vocabulary, deal successfully with complex tasks, and use a specific way of thinking. This is the first volume in a set of laboratory instructions and study notes which are designed to accompany a lecture series in human…

Drug Research

NASA Technical Reports Server (NTRS)

1989-01-01

NBOD2, a program developed at Goddard Space Flight Center to solve equations of motion coupled N-body systems is used by E.I. DuPont de Nemours & Co. to model potential drugs as a series of elements. The program analyses the vibrational and static motions of independent components in drugs. Information generated from this process is used to design specific drugs to interact with enzymes in designated ways.

Intensification of the Learning Process: Gross Motor Performance Scale. A Series of Reports Designed for Classroom Use.

ERIC Educational Resources Information Center

Bucks County Public Schools, Doylestown, PA.

The Gross Motor Performance Screening Test was designed to aid the classroom teacher in obtaining specific information about the child's physical abilities. The test includes items which have been found to measure the various factors of physical fitness. It also includes items to measure skills important to the child and adult. Included also are…

Universal Design for Learning in the Classroom: Practical Applications. What Works for Special-Needs Learners Series

ERIC Educational Resources Information Center

Hall, Tracey E., Ed.; Meyer, Anne, Ed.; Rose, David H., Ed.

2012-01-01

Clearly written and well organized, this book shows how to apply the principles of universal design for learning (UDL) across all subject areas and grade levels. The editors and contributors describe practical ways to develop classroom goals, assessments, materials, and methods that use UDL to meet the needs of all learners. Specific teaching…

Flat-plate photovoltaic array design optimization

NASA Technical Reports Server (NTRS)

Ross, R. G., Jr.

1980-01-01

An analysis is presented which integrates the results of specific studies in the areas of photovoltaic structural design optimization, optimization of array series/parallel circuit design, thermal design optimization, and optimization of environmental protection features. The analysis is based on minimizing the total photovoltaic system life-cycle energy cost including repair and replacement of failed cells and modules. This approach is shown to be a useful technique for array optimization, particularly when time-dependent parameters such as array degradation and maintenance are involved.

Air/Superfund national technical guidance study series, Volume 2. Estimation of baseline air emission at Superfund sites. Interim report(Final)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-01-01

This volume is one in a series of manuals prepared for EPA to assist its Remedial Project Managers in the assessment of the air contaminant pathway and developing input data for risk assessment. The manual provides guidance on developing baseline-emission estimates from hazardous waste sites. Baseline-emission estimates (BEEs) are defined as emission rates estimated for a site in its undisturbed state. Specifically, the manual is intended to: Present a protocol for selecting the appropriate level of effort to characterize baseline air emissions; Assist site managers in designing an approach for BEEs; Describe useful technologies for developing site-specific baseline emission estimatesmore » (BEEs); Help site managers select the appropriate technologies for generating site-specific BEEs.« less

Experimental characterization of a binary actuated parallel manipulator

NASA Astrophysics Data System (ADS)

Giuseppe, Carbone

2016-05-01

This paper describes the BAPAMAN (Binary Actuated Parallel MANipulator) series of parallel manipulators that has been conceived at Laboratory of Robotics and Mechatronics (LARM). Basic common characteristics of BAPAMAN series are described. In particular, it is outlined the use of a reduced number of active degrees of freedom, the use of design solutions with flexural joints and Shape Memory Alloy (SMA) actuators for achieving miniaturization, cost reduction and easy operation features. Given the peculiarities of BAPAMAN architecture, specific experimental tests have been proposed and carried out with the aim to validate the proposed design and to evaluate the practical operation performance and the characteristics of a built prototype, in particular, in terms of operation and workspace characteristics.

Task-Driven Evaluation of Aggregation in Time Series Visualization

PubMed Central

Albers, Danielle; Correll, Michael; Gleicher, Michael

2014-01-01

Many visualization tasks require the viewer to make judgments about aggregate properties of data. Recent work has shown that viewers can perform such tasks effectively, for example to efficiently compare the maximums or means over ranges of data. However, this work also shows that such effectiveness depends on the designs of the displays. In this paper, we explore this relationship between aggregation task and visualization design to provide guidance on matching tasks with designs. We combine prior results from perceptual science and graphical perception to suggest a set of design variables that influence performance on various aggregate comparison tasks. We describe how choices in these variables can lead to designs that are matched to particular tasks. We use these variables to assess a set of eight different designs, predicting how they will support a set of six aggregate time series comparison tasks. A crowd-sourced evaluation confirms these predictions. These results not only provide evidence for how the specific visualizations support various tasks, but also suggest using the identified design variables as a tool for designing visualizations well suited for various types of tasks. PMID:25343147

Functional mixed effects spectral analysis

PubMed Central

KRAFTY, ROBERT T.; HALL, MARTICA; GUO, WENSHENG

2011-01-01

SUMMARY In many experiments, time series data can be collected from multiple units and multiple time series segments can be collected from the same unit. This article introduces a mixed effects Cramér spectral representation which can be used to model the effects of design covariates on the second-order power spectrum while accounting for potential correlations among the time series segments collected from the same unit. The transfer function is composed of a deterministic component to account for the population-average effects and a random component to account for the unit-specific deviations. The resulting log-spectrum has a functional mixed effects representation where both the fixed effects and random effects are functions in the frequency domain. It is shown that, when the replicate-specific spectra are smooth, the log-periodograms converge to a functional mixed effects model. A data-driven iterative estimation procedure is offered for the periodic smoothing spline estimation of the fixed effects, penalized estimation of the functional covariance of the random effects, and unit-specific random effects prediction via the best linear unbiased predictor. PMID:26855437

The Minicourse Instructional Model.

ERIC Educational Resources Information Center

Borg, Walter R.

This paper, originally presented with a film introduction to the minicourse model, overviews the development of a series of microteaching courses designed to train teachers the specific teaching skills necessary to function effectively in the teaching-learning situation. Advantages of the instructional sequence are noted: focus on specific…

10 CFR 850.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... Beryllium article means a manufactured item that is formed to a specific shape or design during manufacture... particles. Immune response refers to the series of cellular events by which the immune system reacts to... medical removal from beryllium areas following a recommendation by the Site Occupational Medicine Director...

Development of N-version software samples for an experiment in software fault tolerance

NASA Technical Reports Server (NTRS)

Lauterbach, L.

1987-01-01

The report documents the task planning and software development phases of an effort to obtain twenty versions of code independently designed and developed from a common specification. These versions were created for use in future experiments in software fault tolerance, in continuation of the experimental series underway at the Systems Validation Methods Branch (SVMB) at NASA Langley Research Center. The 20 versions were developed under controlled conditions at four U.S. universities, by 20 teams of two researchers each. The versions process raw data from a modified Redundant Strapped Down Inertial Measurement Unit (RSDIMU). The specifications, and over 200 questions submitted by the developers concerning the specifications, are included as appendices to this report. Design documents, and design and code walkthrough reports for each version, were also obtained in this task for use in future studies.

Learning about Our World and Our Past: Using the Tools and Resources of Geography and U.S. History. A Report of the 1994 NAEP Assessment.

ERIC Educational Resources Information Center

Hawkins, Evelyn; Stancavage, Fran; Mitchell, Julia; Goodman, Madeline; Lazer, Stephen

This report summarizes results from the 1994 National Assessment of Educational Progress (NAEP), specifically those results concerning geography and U. S. history. The 1994 NAEP asked 4th-, 8th-, and 12th-grade students a series of questions designed to assess their knowledge level and skills applications in specific subjects. This report provides…

Block 4 solar cell module design and test specification for intermediate load center applications

NASA Technical Reports Server (NTRS)

1978-01-01

Requirements for performance of terrestrial solar cell modules intended for use in various test applications are established. During the 1979-80 time period, such applications are expected to be in the 20 to 500 kilowatt size range. A series of characterization and qualification tests necessary to certify the module design for production, and the necessary performance test for acceptance of modules are specified.

An FPGA Testbed for Characterizing and Mapping DOD Applications

DTIC Science & Technology

2017-12-27

series expansion helps to linearize pitch control design for wind turbine using linear quadratic regulator (LQR) [15]. In multi-static radar system...A. Mahmud, M. A. Chowdhury, and J. Zhang, “Stability enhancement of dfig wind turbine using lqr pitch control over rated wind speed,” in 2016 IEEE...the problem of meeting payload design specifications is exacerbated by the need to identify manufacturers with interfaces that match the sensors

Flutter optimization in fighter aircraft design

NASA Technical Reports Server (NTRS)

Triplett, W. E.

1984-01-01

The efficient design of aircraft structure involves a series of compromises among various engineering disciplines. These compromises are necessary to ensure the best overall design. To effectively reconcile the various technical constraints requires a number of design iterations, with the accompanying long elapsed time. Automated procedures can reduce the elapsed time, improve productivity and hold the promise of optimum designs which may be missed by batch processing. Several examples are given of optimization applications including aeroelastic constraints. Particular attention is given to the success or failure of each example and the lessons learned. The specific applications are shown. The final two applications were made recently.

Approaches in highly parameterized inversion: TSPROC, a general time-series processor to assist in model calibration and result summarization

USGS Publications Warehouse

Westenbroek, Stephen M.; Doherty, John; Walker, John F.; Kelson, Victor A.; Hunt, Randall J.; Cera, Timothy B.

2012-01-01

The TSPROC (Time Series PROCessor) computer software uses a simple scripting language to process and analyze time series. It was developed primarily to assist in the calibration of environmental models. The software is designed to perform calculations on time-series data commonly associated with surface-water models, including calculation of flow volumes, transformation by means of basic arithmetic operations, and generation of seasonal and annual statistics and hydrologic indices. TSPROC can also be used to generate some of the key input files required to perform parameter optimization by means of the PEST (Parameter ESTimation) computer software. Through the use of TSPROC, the objective function for use in the model-calibration process can be focused on specific components of a hydrograph.

Biomimicry enhances sequential reactions of tethered glycolytic enzymes, TPI and GAPDHS.

PubMed

Mukai, Chinatsu; Gao, Lizeng; Bergkvist, Magnus; Nelson, Jacquelyn L; Hinchman, Meleana M; Travis, Alexander J

2013-01-01

Maintaining activity of enzymes tethered to solid interfaces remains a major challenge in developing hybrid organic-inorganic devices. In nature, mammalian spermatozoa have overcome this design challenge by having glycolytic enzymes with specialized targeting domains that enable them to function while tethered to a cytoskeletal element. As a step toward designing a hybrid organic-inorganic ATP-generating system, we implemented a biomimetic site-specific immobilization strategy to tether two glycolytic enzymes representing different functional enzyme families: triose phosphoisomerase (TPI; an isomerase) and glyceraldehyde 3-phosphate dehydrogenase (GAPDHS; an oxidoreductase). We then evaluated the activities of these enzymes in comparison to when they were tethered via classical carboxyl-amine crosslinking. Both enzymes show similar surface binding regardless of immobilization method. Remarkably, specific activities for both enzymes were significantly higher when tethered using the biomimetic, site-specific immobilization approach. Using this biomimetic approach, we tethered both enzymes to a single surface and demonstrated their function in series in both forward and reverse directions. Again, the activities in series were significantly higher in both directions when the enzymes were coupled using this biomimetic approach versus carboxyl-amine binding. Our results suggest that biomimetic, site-specific immobilization can provide important functional advantages over chemically specific, but non-oriented attachment, an important strategic insight given the growing interest in recapitulating entire biological pathways on hybrid organic-inorganic devices.

Biomimicry Enhances Sequential Reactions of Tethered Glycolytic Enzymes, TPI and GAPDHS

PubMed Central

Mukai, Chinatsu; Gao, Lizeng; Bergkvist, Magnus; Nelson, Jacquelyn L.; Hinchman, Meleana M.; Travis, Alexander J.

2013-01-01

Maintaining activity of enzymes tethered to solid interfaces remains a major challenge in developing hybrid organic-inorganic devices. In nature, mammalian spermatozoa have overcome this design challenge by having glycolytic enzymes with specialized targeting domains that enable them to function while tethered to a cytoskeletal element. As a step toward designing a hybrid organic-inorganic ATP-generating system, we implemented a biomimetic site-specific immobilization strategy to tether two glycolytic enzymes representing different functional enzyme families: triose phosphoisomerase (TPI; an isomerase) and glyceraldehyde 3-phosphate dehydrogenase (GAPDHS; an oxidoreductase). We then evaluated the activities of these enzymes in comparison to when they were tethered via classical carboxyl-amine crosslinking. Both enzymes show similar surface binding regardless of immobilization method. Remarkably, specific activities for both enzymes were significantly higher when tethered using the biomimetic, site-specific immobilization approach. Using this biomimetic approach, we tethered both enzymes to a single surface and demonstrated their function in series in both forward and reverse directions. Again, the activities in series were significantly higher in both directions when the enzymes were coupled using this biomimetic approach versus carboxyl-amine binding. Our results suggest that biomimetic, site-specific immobilization can provide important functional advantages over chemically specific, but non-oriented attachment, an important strategic insight given the growing interest in recapitulating entire biological pathways on hybrid organic-inorganic devices. PMID:23626684

Nuclear Technology Series. Course 16: Mechanical Component Characteristics and Specifications.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

Developmental Education: The Recognition of Individual Differences

ERIC Educational Resources Information Center

Blimline, Carol; Klimek, Richard

1977-01-01

This article describes the historical, empirical, and theoretical aspects of a series of one-credit student development courses offered at a multicampus community college. The courses, ranging from "The Emerging Woman" to "Study Skills," were specifically designed to meet a variety of developmental needs for a diverse student…

48 CFR 252.227-7013 - Rights in technical data-Noncommercial items.

Code of Federal Regulations, 2011 CFR

2011-10-01

... causing a computer to perform a specific operation or series of operations. (3) Computer software means computer programs, source code, source code listings, object code listings, design details, algorithms... or will be developed exclusively with Government funds; (ii) Studies, analyses, test data, or similar...

48 CFR 252.227-7013 - Rights in technical data-Noncommercial items.

Code of Federal Regulations, 2012 CFR

2012-10-01

... causing a computer to perform a specific operation or series of operations. (3) Computer software means computer programs, source code, source code listings, object code listings, design details, algorithms... or will be developed exclusively with Government funds; (ii) Studies, analyses, test data, or similar...

48 CFR 252.227-7013 - Rights in technical data-Noncommercial items.

Code of Federal Regulations, 2014 CFR

2014-10-01

... causing a computer to perform a specific operation or series of operations. (3) Computer software means computer programs, source code, source code listings, object code listings, design details, algorithms... or will be developed exclusively with Government funds; (ii) Studies, analyses, test data, or similar...

48 CFR 252.227-7013 - Rights in technical data-Noncommercial items.

Code of Federal Regulations, 2010 CFR

2010-10-01

... causing a computer to perform a specific operation or series of operations. (3) Computer software means computer programs, source code, source code listings, object code listings, design details, algorithms... developed exclusively with Government funds; (ii) Studies, analyses, test data, or similar data produced for...

Keeping the beat: use of rhythmic music during exercise activities for the elderly with dementia.

PubMed

Mathews, R M; Clair, A A; Kosloski, K

2001-01-01

Involving people with dementia in group exercise activities often presents a challenge. The effects of a recorded instrumental musical accompaniment was evaluated on participation in a series of 14 exercise activities with a group of nursing home residents with dementia. All exercise sessions, specifically designed by physical therapists for older adults, were lead by an activity aide and consisted of a series of seated exercises. Direct observations of resident behavior were conducted over a 25-week period in a reversal experimental design. Results showed increased levels of participation during the experimental condition observations where rhythmic music accompanied the exercise activities. The music intervention was most successful on those generally most willing to participate in social activities.

Considerations of study design.

PubMed

Koretz, Ronald L

2007-12-01

Research projects attempt to answer specific questions. The particular study design that is selected will depend in large measure on the nature of the question and the time and resources available. There are 5 common categories of clinical questions; they relate to etiology, prognosis, utility of diagnostic tests, efficacy of proposed interventions, and cost of treatment in specific disease states. A number of study designs can be used. Case reports serve to memorialize unusual or novel aspects of diseases. Retrospective case series are useful for defining natural history. Case-control studies are used by epidemiologists to elucidate potential etiologies of diseases. Prospective cohort studies can be used to assess natural history or to assess potential disease etiologies. Controlled trials are designed to assess the efficacy of therapeutic interventions. Studies that define the sensitivity and specificity of diagnostic tests can be used to assess the utility of those tests. Economic analyses estimate the costs that particular diseases or therapies will require. Each of these study designs has limitations; with the exception of high-quality randomized trials, none of these study designs can establish a causative relationship between putative etiologic (or therapeutic) factors and disease (outcomes).

A novel porous framework as variable chemo-sensor: from response of specific carcinogenic alkyl-aromatic to selective detection of explosive nitro-aromatics.

PubMed

Chen, Qihui

2018-06-07

Selective probing one molecule from one class similar molecules is highly challenging due to their similar chemical and physical properties. Here, a novel metal-organic framework FJI-H15 with flexible porous cages has been designed and synthesized, which can specifically recognize ethyl-benzene with ultrahigh enhancement efficiency from series of alkyl-aromatics, in which an unusual size-dependent interaction has been found and proved. While it also can selectively detect phenolic-nitroaromatics among series of nitro-aromatics based on energy transferring and electrostatic interaction. Such unusual specificity and variable mechanisms responding to different type molecules has not been reported, which will provide a new strategy for developing more effective chemo-sensor based on MOFs for probing small structural differences in molecules. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An Integrated Protein Chemistry Laboratory: Chlorophyll and Chlorophyllase

ERIC Educational Resources Information Center

Arkus, Kiani A. J.; Jez, Joseph M.

2008-01-01

Chlorophyll, the most abundant pigment in nature, is degraded during normal plant growth, when leaves change color, and at specific developmental stages. Chlorophyllase catalyzes the first chemical reaction in this process, that is, the hydrolysis of chlorophyll into chlorophyllide. Here, we describe a series of laboratory sessions designed to…

Participation, Decentralization, and Advocacy Planning, Resource Paper No. 25.

ERIC Educational Resources Information Center

Kasperson, Roger E.; Breitbart, Myrna

This resource paper on the subject of citizen participation, decentralization, and advocacy planning is part of a series designed to supplement undergraduate geography courses. The approach of the paper de-emphasizes inventory or case study reviews of specific participation or advocacy planning projects for a more general conceptual discussion of…

24 CFR 201.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Association, and which is designed to reduce the risk of death, personal injury, or property damage resulting... or advance, plus interest, if any, at a stated annual rate over time, with the borrower's obligation... details the wholesale (base) prices at the factory for specific models or series of manufactured homes and...

Bicentennial Source Book, Level I, K-2.

ERIC Educational Resources Information Center

Herb, Sharon; And Others

This student activities source book is one of a series of four developed by the Carroll County Public School System, Maryland, for celebration of the Bicentennial. It is specifically designed to generate ideas integrating the Bicentennial celebration into various disciplines, classroom activities, and school-wide events at the kindergarten through…

Book Series Helps Girls Fight Obesity

ERIC Educational Resources Information Center

Curriculum Review, 2009

2009-01-01

The most recent National Health and Nutrition Examination Survey (NHANES) data (2003-2004) revealed that approximately 18% of children 6-to-19 years old are overweight. The Beacon Street Girls brand was specifically designed to entertain while providing healthy role models and positive messages. This article presents a study that tested whether an…

Exploring Visual Arts and Crafts Careers. A Student Guidebook.

ERIC Educational Resources Information Center

Dubman, Shelia; And Others

One of six student guidebooks in a series of 11 arts and humanities career exploration guides for grade 7-12 teachers, counselors, and students, this student book on exploration of visual arts and crafts careers presents information on specific occupations in seven different career areas: Visual communications, product design, environmental…

How To Learn More in Less Time.

ERIC Educational Resources Information Center

Shaughnessy, Michael F.

Designed to help poorly prepared students perform better in college and to help prepared students perform at higher levels, this paper presents a series of specific suggestions for students regarding study activities, course choice, thinking behavior, and time allocation. The suggestions include the following: (1) eliminate diversions during study…

Bicentennial Source Book, Level II, Grades 3-5.

ERIC Educational Resources Information Center

Orth, Nancy; And Others

This study activities source book is one of a series of four developed by the Carroll County Public School System, Maryland, for celebration of the Bicentennial. It is specifically designed to generate ideas integrating the Bicentennial celebration into various disciplines, classroom activities, and school-wide events at the third grade through…

[Parenting Information. Informacion Sobre Como Ser Padres Mejores.

ERIC Educational Resources Information Center

Moreno, Steve

These five booklets, containing information on how parenting can effect children's school achievement, are part of a series of 22 innovative booklets designed specifically to help parents understand and help their children learn. Booklet #1, "Parents--Teach Your Children to Learn [Before They Go to School]," defines intelligence and…

Responsibility: A Thematic Sequence of English Units.

ERIC Educational Resources Information Center

Institute for Services to Education, Inc., Washington, DC.

One of a series of volumes containing units on specific themes designed for use in college freshman English courses, this particular volume considers people and their responsibilities, through the use of recordings, cartoons, satire, modern and ancient drama, modern fiction, and contemporary essays. The sequence is divided into four sections.…

Harvesting the Ocean: 1. The Ocean.

ERIC Educational Resources Information Center

Caton, Albert, Ed.; And Others

This booklet is the first in a series of three interdisciplinary units which focus specifically on the Pacific Ocean and its surrounding countries. The booklet, designed for lower secondary students, provides an introduction to the ocean environment such that students can understand the physical factors underlying issues raised by the other two…

Hospitality Services. Curriculum Guide [and] Student Activity Book [and] Reference Book.

ERIC Educational Resources Information Center

Texas Tech Univ., Lubbock. Curriculum Center for Family and Consumer Sciences.

These three publications comprise a course that provides occupationally specific training designed to develop knowledge and skills for employment in the multifaceted hospitality services industry. The curriculum guide is the teacher component of the series. Contents include the Texas Essential Knowledge and Skills (TEKS); sample course outlines;…

Project fires. Volume 2: Protective ensemble performance standards, phase 1B

NASA Astrophysics Data System (ADS)

Abeles, F. J.

1980-05-01

The design of the prototype protective ensemble was finalized. Prototype ensembles were fabricated and then subjected to a series of qualification tests which were based upon the protective ensemble performance standards PEPS requirements. Engineering drawings and purchase specifications were prepared for the new protective ensemble.

A vegetation classification system for use in California: its conceptual basis

Treesearch

Timothy E. Paysen; Jeanine A. Derby; C. Eugene Conrad

1982-01-01

A taxonomic Vegetation Classification System proposed for use in California is designed to simplify interdisciplinary communication about vegetation. The system structure is an aggregative plant community hierarchy at four levels of precision--the Association, Series, Subformation, and Formation. A flexible Phase category links specific resource management concerns to...

48 CFR 252.227-7013 - Rights in technical data-Noncommercial items.

Code of Federal Regulations, 2013 CFR

2013-10-01

... causing a computer to perform a specific operation or series of operations. (3) Computer software means computer programs, source code, source code listings, object code listings, design details, algorithms... funds; (ii) Studies, analyses, test data, or similar data produced for this contract, when the study...

Software Design for Interactive Graphic Radiation Treatment Simulation Systems*

PubMed Central

Kalet, Ira J.; Sweeney, Christine; Jacky, Jonathan

1990-01-01

We examine issues in the design of interactive computer graphic simulation programs for radiation treatment planning (RTP), as well as expert system programs that automate parts of the RTP process, in light of ten years of experience at designing, building and using such programs. An experiment in object-oriented design using standard Pascal shows that while some advantage is gained from the design, it is still difficult to achieve modularity and to integrate expert system components. A new design based on the Common LISP Object System (CLOS) is described. This series of designs for RTP software shows that this application benefits in specific ways from object-oriented design methods and appropriate languages and tools.

Software Productivity of Field Experiments Using the Mobile Agents Open Architecture with Workflow Interoperability

NASA Technical Reports Server (NTRS)

Clancey, William J.; Lowry, Michael R.; Nado, Robert Allen; Sierhuis, Maarten

2011-01-01

We analyzed a series of ten systematically developed surface exploration systems that integrated a variety of hardware and software components. Design, development, and testing data suggest that incremental buildup of an exploration system for long-duration capabilities is facilitated by an open architecture with appropriate-level APIs, specifically designed to facilitate integration of new components. This improves software productivity by reducing changes required for reconfiguring an existing system.

Design-of-experiments to Reduce Life-cycle Costs in Combat Aircraft Inlets

NASA Technical Reports Server (NTRS)

Anderson, Bernhard H.; Baust, Henry D.; Agrell, Johan

2003-01-01

It is the purpose of this study to demonstrate the viability and economy of Design- of-Experiments (DOE), to arrive at micro-secondary flow control installation designs that achieve optimal inlet performance for different mission strategies. These statistical design concepts were used to investigate the properties of "low unit strength" micro-effector installation. "Low unit strength" micro-effectors are micro-vanes, set a very low angle-of incidence, with very long chord lengths. They are designed to influence the neat wall inlet flow over an extended streamwise distance. In this study, however, the long chord lengths were replicated by a series of short chord length effectors arranged in series over multiple bands of effectors. In order to properly evaluate the performance differences between the single band extended chord length installation designs and the segmented multiband short chord length designs, both sets of installations must be optimal. Critical to achieving optimal micro-secondary flow control installation designs is the understanding of the factor interactions that occur between the multiple bands of micro-scale vane effectors. These factor interactions are best understood and brought together in an optimal manner through a structured DOE process, or more specifically Response Surface Methods (RSM).

Combinations of Earth Orientation Observations: SPACE94, COMB94, and POLE94

NASA Technical Reports Server (NTRS)

Gross, R. S.

1995-01-01

A Kalman filter has been used to combine all publicly available, independently determined measurements of the Earth's orientation taken by the modern, space-geodetic techniques of very long baseline interferometry, satellite laser ranging, lunar laser ranging, and the global positioning system. Prior to combining the data, tidal terms were removed from the UT1 measurements, outlying data points were deleted, series-specific corrections were applied for bias and rate, and the stated uncertainties of the measurements were adjusted by multiplying them by series-specific scale factors. Values for these bias- rate corrections and uncertainty scale factors were determined by an iterative, round-robin procedure wherein each data set is compared, in turn, to a combination of all other data sets. When applied to the measurements, the bias-rate corrections thus determined make the data sets agree with each other in bias and rate, and the uncertainty scale factors thus determined make the residual of each series (when differenced with a combination of all others) have a reduced chi-square of one. The corrected and adjusted series are then placed within an IERS reference frame by aligning them with the IERS Earth orientation series EOP (IERS)90C04. The result of combining these corrected, adjusted and aligned series is designated SPCE94 and spans October 6.0, 1976 to January 27.0, 1995 at daily intervals.

Weird-World, Weird-World

NASA Astrophysics Data System (ADS)

Schuller, Ivan; Wargo, Rich

2014-03-01

We will present the first in a series of videos designed and produced specifically as a pilot for the YouTube audience to playfully explore interesting and unusual phenomena that physics reveals, and their uses in modern life. No talking heads, no pedants, no complicated theory - but rather a visually captivating and often kooky comical look at exclusion principle, entanglement, tunneling and the retinue of exceedingly strange things that happen in classical and quantum physics and how we understand and actually use this weirdness each and everyday. Produced by the UC San Diego-based creative partnership between an active physicist and established university based science media producer responsible for the highly successful and comical nanoscience caper When Things Get Small, this will pilot an on-going series with the specific goal of entertaining and engaging audiences of all ages. The series has planned distribution and marketing on YouTube though the unique programming and distribution capacities of University of California Television to commence in 2013. Supported by APS, UCSD-Center for Advanced Nanoscience and UCTV.

Strategies and arguments of ergonomic design for sustainability.

PubMed

Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

2012-01-01

Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

Models for forecasting hospital bed requirements in the acute sector.

PubMed Central

Farmer, R D; Emami, J

1990-01-01

STUDY OBJECTIVE--The aim was to evaluate the current approach to forecasting hospital bed requirements. DESIGN--The study was a time series and regression analysis. The time series for mean duration of stay for general surgery in the age group 15-44 years (1969-1982) was used in the evaluation of different methods of forecasting future values of mean duration of stay and its subsequent use in the formation of hospital bed requirements. RESULTS--It has been suggested that the simple trend fitting approach suffers from model specification error and imposes unjustified restrictions on the data. Time series approach (Box-Jenkins method) was shown to be a more appropriate way of modelling the data. CONCLUSION--The simple trend fitting approach is inferior to the time series approach in modelling hospital bed requirements. PMID:2277253

Design and structure of stapled peptides binding to estrogen receptors.

PubMed

Phillips, Chris; Roberts, Lee R; Schade, Markus; Bazin, Richard; Bent, Andrew; Davies, Nichola L; Moore, Rob; Pannifer, Andrew D; Pickford, Andrew R; Prior, Stephen H; Read, Christopher M; Scott, Andrew; Brown, David G; Xu, Bin; Irving, Stephen L

2011-06-29

Synthetic peptides that specifically bind nuclear hormone receptors offer an alternative approach to small molecules for the modulation of receptor signaling and subsequent gene expression. Here we describe the design of a series of novel stapled peptides that bind the coactivator peptide site of estrogen receptors. Using a number of biophysical techniques, including crystal structure analysis of receptor-stapled peptide complexes, we describe in detail the molecular interactions and demonstrate that all-hydrocarbon staples modulate molecular recognition events. The findings have implications for the design of stapled peptides in general.

Bifacial Si heterojunction-perovskite organic-inorganic tandem to produce highly efficient ( ηT * ˜ 33%) solar cell

NASA Astrophysics Data System (ADS)

Asadpour, Reza; Chavali, Raghu V. K.; Ryyan Khan, M.; Alam, Muhammad A.

2015-06-01

As single junction photovoltaic (PV) technologies, both Si heterojunction (HIT) and perovskite based solar cells promise high efficiencies at low cost. Intuitively, a traditional tandem cell design with these cells connected in series is expected to improve the efficiency further. Using a self-consistent numerical modeling of optical and transport characteristics, however, we find that a traditional series connected tandem design suffers from low J S C due to band-gap mismatch and current matching constraints. Specifically, a traditional tandem cell with state-of-the-art HIT ( η = 24 % ) and perovskite ( η = 20 % ) sub-cells provides only a modest tandem efficiency of η T ˜ 25%. Instead, we demonstrate that a bifacial HIT/perovskite tandem design decouples the optoelectronic constraints and provides an innovative path for extraordinary efficiencies. In the bifacial configuration, the same state-of-the-art sub-cells achieve a normalized output of ηT * = 33%, exceeding the bifacial HIT performance at practical albedo reflections. Unlike the traditional design, this bifacial design is relatively insensitive to perovskite thickness variations, which may translate to simpler manufacture and higher yield.

Evaluating disease management program effectiveness: an introduction to time-series analysis.

PubMed

Linden, Ariel; Adams, John L; Roberts, Nancy

2003-01-01

Currently, the most widely used method in the disease management (DM) industry for evaluating program effectiveness is referred to as the "total population approach." This model is a pretest-posttest design, with the most basic limitation being that without a control group, there may be sources of bias and/or competing extraneous confounding factors that offer a plausible rationale explaining the change from baseline. Furthermore, with the current inclination of DM programs to use financial indicators rather than program-specific utilization indicators as the principal measure of program success, additional biases are introduced that may cloud evaluation results. This paper presents a non-technical introduction to time-series analysis (using disease-specific utilization measures) as an alternative, and more appropriate, approach to evaluating DM program effectiveness than the current total population approach.

miniSEED: The Backbone Data Format for Seismological Time Series

NASA Astrophysics Data System (ADS)

Ahern, T. K.; Benson, R. B.; Trabant, C. M.

2017-12-01

In 1987, the International Federation of Digital Seismograph Networks (FDSN), adopted the Standard for the Exchange of Earthquake Data (SEED) format to be used for data archiving and exchange of seismological time series data. Since that time, the format has evolved to accommodate new capabilities and features. For example, a notable change in 1992 allowed the format, which includes both the comprehensive metadata and the time series samples, to be used in two additional forms: a container for metadata only called "dataless SEED", and 2) a stand-alone structure for time series called "miniSEED". While specifically designed for seismological data and related metadata, this format has proven to be a useful format for a wide variety of geophysical time series data. Many FDSN data centers now store temperature, pressure, infrasound, tilt and other time series measurements in this internationally used format. Since April 2016, members of the FDSN have been in discussions to design a next generation miniSEED format to accommodate current and future needs, to further generalize the format, and to address a number of historical problems or limitations. We believe the correct approach is to simplify the header, allow for arbitrary header additions, expand the current identifiers, and allow for anticipated future identifiers which are currently unknown. We also believe the primary goal of the format is for efficient archiving, selection and exchange of time series data. By focusing on these goals we avoid trying to generalize the format too broadly into specialized areas such as efficient, low-latency delivery, or including unbounded non-time series data. Our presentation will provide an overview of this format and highlight its most valuable characteristics for time series data from any geophysical domain or beyond.

Program Evaluation in Gifted Education. Essential Readings in Gifted Education Series

ERIC Educational Resources Information Center

Callahan, Carolyn M., Ed.; Reis, Sally M., Ed.

2004-01-01

The readings in this ready-reference report on specific program evaluations, offer critical guidance in the development and utilization of instruments for assessing gifted and talented programs, and are designed to stimulate the discussion of issues surrounding the evaluation of gifted programs. Key features include: (1) Carolyn M. Callahan's…

Folklore around the World: An Annotated Bibliography of Folk Literature.

ERIC Educational Resources Information Center

Eastman, Kristen Paletti, Ed.; Omura, Grace Inokuchi, Ed.

Fourth in a series, the annotated bibliographies in this collection were compiled by students in the Traditional Literature and Oral Narration class at the School of Library and Information Studies, University of Hawaii at Manoa. These bibliographies are designed to make information about specific topics in traditional literature easily accessible…

"'I Am Canada': Exploring Social Responsibility in Social Studies Using Young Adult Historical Fiction"

ERIC Educational Resources Information Center

Horton, Todd A.

2014-01-01

This paper explores educating for democratic citizenship with a focus on the intersection between reading and values, specifically the nurturing of social responsibility. Using a pre-designed framework for teaching for social responsibility, excerpts from a young adult historical fiction series are used to consider learning possibilities in the…

24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

Code of Federal Regulations, 2014 CFR

2014-04-01

... fireplace stoves certified under the HUD Building Products Certification Program shall be designed... and manufacturer series or model number; and (iv) The type of fuel to be used. (2) The certification... Accreditation Program. (2) The administrator shall visit the manufacturer's facility two times a year to assure...

24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

Code of Federal Regulations, 2010 CFR

2010-04-01

... fireplace stoves certified under the HUD Building Products Certification Program shall be designed... and manufacturer series or model number; and (iv) The type of fuel to be used. (2) The certification... Accreditation Program. (2) The administrator shall visit the manufacturer's facility two times a year to assure...

24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

Code of Federal Regulations, 2012 CFR

2012-04-01

... fireplace stoves certified under the HUD Building Products Certification Program shall be designed... and manufacturer series or model number; and (iv) The type of fuel to be used. (2) The certification... Accreditation Program. (2) The administrator shall visit the manufacturer's facility two times a year to assure...

24 CFR 200.936 - Supplementary specific procedural requirements under HUD building products certification program...

Code of Federal Regulations, 2011 CFR

2011-04-01

... fireplace stoves certified under the HUD Building Products Certification Program shall be designed... and manufacturer series or model number; and (iv) The type of fuel to be used. (2) The certification... Accreditation Program. (2) The administrator shall visit the manufacturer's facility two times a year to assure...

Anaerobic Digestion. Selected Instructional Activities and References. Instructional Resources Monograph Series.

ERIC Educational Resources Information Center

Townsend, Robert D., Comp.

Focusing specifically on the wastewater treatment process of anaerobic digestion, this document identifies instructional and reference materials for use by professionals in the field in the development and implementation of new programs or in the updating of existing programs. It is designed to help trainers, plant operators, educators, engineers,…

Masomo Ya Kiswahili [A Kiswahili Course].

ERIC Educational Resources Information Center

Michuki, David N.; Cahill, William F.

This series of illustrated texts in beginning Swahili is a project of the Language Section of the Curriculum Development and Research Centre of the Ministry of Education, Nairobi, Kenya. The course is designed specifically for children who begin the study of Swahili as a second language in Standard (Grade) 4. Students' texts consist of Volumes 1…

Project FIRES [Firefighters' Integrated Response Equipment System]. Volume 2: Protective Ensemble Performance Standards, Phase 1B

NASA Technical Reports Server (NTRS)

Abeles, F. J.

1980-01-01

The design of the prototype protective ensemble was finalized. Prototype ensembles were fabricated and then subjected to a series of qualification tests which were based upon the protective ensemble performance standards PEPS requirements. Engineering drawings and purchase specifications were prepared for the new protective ensemble.

A Practical Science Investigation for Middle School Students: Designing a Simple Cost Effective Chemical Solar Padiation Dosimeter

ERIC Educational Resources Information Center

Downs, Nathan; Larsen, Kim; Parisi, Alfio; Schouten, Peter; Brennan, Chris

2012-01-01

A practical exercise for developing a simple cost-effective solar ultraviolet radiation dosimeter is presented for use by middle school science students. Specifically, this exercise investigates a series of experiments utilising the historical blue print reaction, combining ammonium iron citrate and potassium hexacyanoferrate to develop an…

Questioning Clerkship: Applying Popper's Evolutionary Analysis of Learning to Medical Student Training

ERIC Educational Resources Information Center

Chitpin, Jeremy Sebastian; Chitpin, Stephanie

2017-01-01

Purpose: Through a series of critical discussions on Karl Popper's evolutionary analysis of learning and the non-authoritarian values it promotes, the purpose of this paper is to advocate a Popperian approach for building medical student knowledge. Specifically, it challenges positivist assumptions that permeate the design and management of many…

LIQUID METAL REACTOR COOLING SYSTEMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aberdam, M.; Gros, G.

1965-02-01

This report is part of a series of bibliographies. The specific purpose of this report is to describe the various elements of the cooling systems in the principal liquid-metal-cooled reactors now operating, being contsructed, or in the design stage. The information given is drawn from reports or publicatios received during or before September 1964.

The Talking Dictionary. The Prospectus Series, Paper No. 2.

ERIC Educational Resources Information Center

Ward, Ted

Three talking dictionaires designed to increase independence and resource-use skills of handicapped children have specific advantages and limitations. System I involves a random access tape recorder, a printed or braille dictionary which contains the inquiry numbers for words, a console (similar to an adding machine) on which the number is…

The Guide for Choosing Native American Parenting Curricula.

ERIC Educational Resources Information Center

Wingo, Robin R.; Mertensmeyer, Carol

This guide is designed to help professionals working with Native American parents to be better prepared to select culturally sensitive materials, to program more effectively, and to draw from the richness within the Native American culture. The guide is one in a series of culturally specific guides produced as part of ParentLink's Review of…

Elementary Children's Retrodictive Reasoning about Earth Science

ERIC Educational Resources Information Center

Libarkin, Julie C.; Schneps, Matthew H.

2012-01-01

We report on interviews conducted with twenty-one elementary school children (grades 1-5) about a number of Earth science concepts. These interviews were undertaken as part of a teacher training video series designed specifically to assist elementary teachers in learning essential ideas in Earth science. As such, children were interviewed about a…

Choice: A Thematic Sequence of English Units.

ERIC Educational Resources Information Center

Institute for Services to Education, Inc., Washington, DC.

One of a series of volumes containing units on specific themes designed for use in college freshman English courses, this particular volume considers the issue of choice through literature (short stories, novels, and poems). A section describing chamber theatre technique, which is an integral part of many of the units in this sequence, is…

Semi-Structured Interview Protocol for Constructing Logic Models

ERIC Educational Resources Information Center

Gugiu, P. Cristian; Rodriguez-Campos, Liliana

2007-01-01

This paper details a semi-structured interview protocol that evaluators can use to develop a logic model of a program's services and outcomes. The protocol presents a series of questions, which evaluators can ask of specific program informants, that are designed to: (1) identify key informants basic background and contextual information, (2)…

Observing and Producing Sounds, Elementary School Science, Level Four, Teaching Manual.

ERIC Educational Resources Information Center

Hale, Helen E.

This pilot teaching unit is one of a series developed for use in elementary school science programs. This unit is designed to help children discover specific concepts which relate to sound, such as volume, pitch, and echo. The student activities employ important scientific processes, such as observation, communication, inference, classification,…

Money, the Banking System and Monetary Policy in Canada: A Teaching Unit.

ERIC Educational Resources Information Center

Curtis, Douglas C. A.; Staunton, Ted, Ed.

One of a series of teaching units designed to introduce secondary school students to the Canadian economy, this handbook contains instructional materials on Canada's monetary system and policy. Material is organized and presented in terms of specific topic readings and illustrative activities. The topics covered in six sections are money, the…

Family-Centered Early Intervention for Communication Disorders: Prevention and Treatment. Excellence in Practice Series.

ERIC Educational Resources Information Center

Donahue-Kilburg, Gail

This book is designed to provide a broad range of information on family structure and function in an increasingly multicultural society, family system characteristics and the implications for intervention, communication development in the family context, the nature and delivery of family centered-services, specific requirements of Public Law…

The microcomputer scientific software series 5: the BIOMASS user's guide.

Treesearch

George E. Host; Stephen C. Westin; William G. Cole; Kurt S. Pregitzer

1989-01-01

BIOMASS is an interactive microcomputer program that uses allometric regression equations to calculate aboveground biomass of common tree species of the Lake States. The equations are species-specific and most use both diameter and height as independent variables. The program accommodates fixed area and variable radius sample designs and produces both individual tree...

78 FR 25846 - Special Conditions: Airbus, Model A340-600 Series Airplanes; Lower Deck Crew Rest Compartments

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-03

... significantly delay issuance of the design approval and thus delivery of the affected aircraft. In addition, the... specific portion of the special conditions, explain the reason for any recommended change, and include... compartment configuration that affect crew member emergency egress or any other procedures affecting the...

Zirconium Hydride Space Power Reactor design.

NASA Technical Reports Server (NTRS)

Asquith, J. G.; Mason, D. G.; Stamp, S.

1972-01-01

The Zirconium Hydride Space Power Reactor being designed and fabricated at Atomics International is intended for a wide range of potential applications. Throughout the program a series of reactor designs have been evaluated to establish the unique requirements imposed by coupling with various power conversion systems and for specific applications. Current design and development emphasis is upon a 100 kilowatt thermal reactor for application in a 5 kwe thermoelectric space power generating system, which is scheduled to be fabricated and ground tested in the mid 70s. The reactor design considerations reviewed in this paper will be discussed in the context of this 100 kwt reactor and a 300 kwt reactor previously designed for larger power demand applications.

Optimizing Use of Water Management Systems during Changes of Hydrological Conditions

NASA Astrophysics Data System (ADS)

Výleta, Roman; Škrinár, Andrej; Danáčová, Michaela; Valent, Peter

2017-10-01

When designing the water management systems and their components, there is a need of more detail research on hydrological conditions of the river basin, runoff of which creates the main source of water in the reservoir. Over the lifetime of the water management systems the hydrological time series are never repeated in the same form which served as the input for the design of the system components. The design assumes the observed time series to be representative at the time of the system use. However, it is rather unrealistic assumption, because the hydrological past will not be exactly repeated over the design lifetime. When designing the water management systems, the specialists may occasionally face the insufficient or oversized capacity design, possibly wrong specification of the management rules which may lead to their non-optimal use. It is therefore necessary to establish a comprehensive approach to simulate the fluctuations in the interannual runoff (taking into account the current dry and wet periods) in the form of stochastic modelling techniques in water management practice. The paper deals with the methodological procedure of modelling the mean monthly flows using the stochastic Thomas-Fiering model, while modification of this model by Wilson-Hilferty transformation of independent random number has been applied. This transformation usually applies in the event of significant asymmetry in the observed time series. The methodological procedure was applied on the data acquired at the gauging station of Horné Orešany in the Parná Stream. Observed mean monthly flows for the period of 1.11.1980 - 31.10.2012 served as the model input information. After extrapolation the model parameters and Wilson-Hilferty transformation parameters the synthetic time series of mean monthly flows were simulated. Those have been compared with the observed hydrological time series using basic statistical characteristics (e. g. mean, standard deviation and skewness) for testing the quality of the model simulation. The synthetic hydrological series of monthly flows were created having the same statistical properties as the time series observed in the past. The compiled model was able to take into account the diversity of extreme hydrological situations in a form of synthetic series of mean monthly flows, while the occurrence of a set of flows was confirmed, which could and may occur in the future. The results of stochastic modelling in the form of synthetic time series of mean monthly flows, which takes into account the seasonal fluctuations of runoff within the year, could be applicable in engineering hydrology (e. g. for optimum use of the existing water management system that is related to reassessment of economic risks of the system).

Standards for Clinical Trials in Male and Female Sexual Dysfunction: I. Phase I to Phase IV Clinical Trial Design.

PubMed

Fisher, William A; Gruenwald, Ilan; Jannini, Emmanuele A; Lev-Sagie, Ahinoam; Lowenstein, Lior; Pyke, Robert E; Reisman, Yakov; Revicki, Dennis A; Rubio-Aurioles, Eusebio

2016-12-01

This series of articles outlines standards for clinical trials of treatments for male and female sexual dysfunctions, with a focus on research design and patient-reported outcome assessment. These articles consist of revision, updating, and integration of articles on standards for clinical trials in male and female sexual dysfunction from the 2010 International Consultation on Sexual Medicine developed by the authors as part of the 2015 International Consultation on Sexual Medicine. We are guided in this effort by several principles. In contrast to previous versions of these guidelines, we merge discussion of standards for clinical trials in male and female sexual dysfunction in an integrated approach that emphasizes the common foundational practices that underlie clinical trials in the two settings. We present a common expected standard for clinical trial design in male and female sexual dysfunction, a common rationale for the design of phase I to IV clinical trials, and common considerations for selection of study population and study duration in male and female sexual dysfunction. We present a focused discussion of fundamental principles in patient- (and partner-) reported outcome assessment and complete this series of articles with specific discussions of selected aspects of clinical trials that are unique to male and to female sexual dysfunction. Our consideration of standards for clinical trials in male and female sexual dysfunction attempts to embody sensitivity to existing and new regulatory guidance and to address implications of the evolution of the diagnosis of sexual dysfunction that have been brought forward in the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition. The first article in this series focuses on phase I to phase IV clinical trial design considerations. Subsequent articles in this series focus on the measurement of patient-reported outcomes, unique aspects of clinical trial design for men, and unique aspects of clinical trial design for women. Copyright © 2016 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

Development of integrated, zero-G pneumatic transporter/rotating paddle incinerator/catalytic afterburner subsystem for processing human wastes on board spacecraft

NASA Technical Reports Server (NTRS)

Fields, S. F.; Labak, L. J.; Honegger, R. J.

1974-01-01

A four component system was developed which consists of a particle size reduction mechanism, a pneumatic waste transport system, a rotating-paddle incinerator, and a catalytic afterburner to be integrated into a six-man, zero-g subsystem for processing human wastes on board spacecraft. The study included the development of different concepts or functions, the establishment of operational specifications, and a critical evaluation for each of the four components. A series of laboratory tests was run, and a baseline subsystem design was established. An operational specification was also written in preparation for detailed design and testing of this baseline subsystem.

ControlShell - A real-time software framework

NASA Technical Reports Server (NTRS)

Schneider, Stanley A.; Ullman, Marc A.; Chen, Vincent W.

1991-01-01

ControlShell is designed to enable modular design and impplementation of real-time software. It is an object-oriented tool-set for real-time software system programming. It provides a series of execution and data interchange mechansims that form a framework for building real-time applications. These mechanisms allow a component-based approach to real-time software generation and mangement. By defining a set of interface specifications for intermodule interaction, ControlShell provides a common platform that is the basis for real-time code development and exchange.

Simulation Modeling to Compare High-Throughput, Low-Iteration Optimization Strategies for Metabolic Engineering

PubMed Central

Heinsch, Stephen C.; Das, Siba R.; Smanski, Michael J.

2018-01-01

Increasing the final titer of a multi-gene metabolic pathway can be viewed as a multivariate optimization problem. While numerous multivariate optimization algorithms exist, few are specifically designed to accommodate the constraints posed by genetic engineering workflows. We present a strategy for optimizing expression levels across an arbitrary number of genes that requires few design-build-test iterations. We compare the performance of several optimization algorithms on a series of simulated expression landscapes. We show that optimal experimental design parameters depend on the degree of landscape ruggedness. This work provides a theoretical framework for designing and executing numerical optimization on multi-gene systems. PMID:29535690

Rotor design for maneuver performance

NASA Technical Reports Server (NTRS)

Berry, John D.; Schrage, Daniel

1986-01-01

A method of determining the sensitivity of helicopter maneuver performance to changes in basic rotor design parameters is developed. Maneuver performance is measured by the time required, based on a simplified rotor/helicopter performance model, to perform a series of specified maneuvers. This method identifies parameter values which result in minimum time quickly because of the inherent simplicity of the rotor performance model used. For the specific case studied, this method predicts that the minimum time required is obtained with a low disk loading and a relatively high rotor solidity. The method was developed as part of the winning design effort for the American Helicopter Society student design competition for 1984/1985.

Design of Potent and Druglike Nonphenolic Inhibitors for Catechol O-Methyltransferase Derived from a Fragment Screening Approach Targeting the S-Adenosyl-l-methionine Pocket.

PubMed

Lerner, Christian; Jakob-Roetne, Roland; Buettelmann, Bernd; Ehler, Andreas; Rudolph, Markus; Rodríguez Sarmiento, Rosa María

2016-11-23

A fragment screening approach designed to target specifically the S-adenosyl-l-methionine pocket of catechol O-methyl transferase allowed the identification of structurally related fragments of high ligand efficiency and with activity on the described orthogonal assays. By use of a reliable enzymatic assay together with X-ray crystallography as guidance, a series of fragment modifications revealed an SAR and, after several expansions, potent lead compounds could be obtained. For the first time nonphenolic and small low nanomolar potent, SAM competitive COMT inhibitors are reported. These compounds represent a novel series of potent COMT inhibitors that might be further optimized to new drugs useful for the treatment of Parkinson's disease, as adjuncts in levodopa based therapy, or for the treatment of schizophrenia.

[Family Health. La Salud de la Familia.

ERIC Educational Resources Information Center

Moreno, Steve

These three booklets on family and child health are part of a series of 22 booklets specifically designed to help parents understand their children and help them to learn. "The Effects of Stress on Parents and Family Life" (booklet #17), covers issues such as causes and effects of stress, stress and our modern society, and coping with…

Health Education in Elementary Schools. Curriculum Bulletin, 1969-70 Series. Number 2.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Bureau of Curriculum Development.

This publication serves as a basic instrument for health instruction in the elementary grades. It has been designed for adaptation in meeting the differing needs of New York City pupils. The format of the bulletin enables the teacher to plan specific lessons with health learning supplemented by recommended pupil activities through a basic set up…

TOPEX Software Document Series. Volume 5; Rev. 1; TOPEX GDR Processing

NASA Technical Reports Server (NTRS)

Lee, Jeffrey; Lockwood, Dennis; Hancock, David W., III

2003-01-01

This document is a compendium of the WFF TOPEX Software Development Team's knowledge regarding Geophysical Data Record (GDR) Processing. It includes many elements of a requirements document, a software specification document, a software design document, and a user's manual. In the more technical sections, this document assumes the reader is familiar with TOPEX and instrument files.

PISA for Development and the Sustainable Development Goals. PISA for Development Brief 17

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

The PISA for Development brief series is a set of concise monthly education policy-oriented notes published by the OECD which are designed to describe a specific PISA for Development topic. In this brief, PISA's role in monitoring the fourth United Nations Sustainable Development Goal--to "ensure inclusive and equitable quality education and…

Occupational Home Economics Education Series. Consumer Services. Competency Based Teaching Module.

ERIC Educational Resources Information Center

Lowe, Phyllis; And Others

This module, one of ten competency based modules developed for vocational home economics teachers, is based on a job cluster in consumer services. It is designed for a variety of levels (secondary, post-secondary, adult) in both school and non-school settings. Focusing on the specific job title of consumer advisor, eight competencies are listed…

76 FR 31465 - Airworthiness Directives; Various Aircraft Equipped With Rotax Aircraft Engines 912 A Series Engine

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

... has been detected, which exceeds the hardness of the design specification. The affected washers are... Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590. Hand Delivery: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor...

More Metric Measurement Concepts. Fundamentals of Occupational Mathematics. Module 10.

ERIC Educational Resources Information Center

Engelbrecht, Nancy; And Others

This module is the 10th in a series of 12 learning modules designed to teach occupational mathematics. Blocks of informative material and rules are followed by examples and practice problems. The solutions to the practice problems are found at the end of the module. Specific topics covered include the metric concepts of mass, weight, and volume…

Public School Principals: Opinions and Status. ERS Educator Opinion Poll.

ERIC Educational Resources Information Center

Educational Research Service, Arlington, VA.

The opinion poll of public school administrators reported in this document is part of a series designed to report scientifically collected data that accurately reflects the views and experiences of specific groups of educators. For this study, a total of 3,300 principals were included in the random sample and 1,502 (46 percent) responded. Tables…

Learning Achievement Packages, Language Arts--Spanish Grammar.

ERIC Educational Resources Information Center

Andrade, Magdalena; Sones, Mary

This set of three Spanish curriculum units is part of a series developed as part of a Spanish-English bilingual project and designed to deal with special language difficulties in grades 7-12 and adult education classes. These units are intended to aid the first- or second-year student in specific problem areas: capital letters, dictionary use, and…

Adapting Institutions to the Adult Learner: Experiments in Progress. Current Issues in Higher Education, 1978 National Conference Series.

ERIC Educational Resources Information Center

Loring, Rosalind K.; And Others

The four conference papers presented here examine specific strategies and programs by which colleges and universities can design and adapt programs for adult students. In "Strategies of Adaptation" Rosalind K. Loring notes six major types of adaptation to which traditional, four-year schools have resorted (flexible schedules, simulated…

Metropolitan Neighborhoods: Participation and Conflict over Change. Resource Paper No. 16.

ERIC Educational Resources Information Center

Wolpert, Julian; And Others

Metropolitan land use change, with a specific focus on the processes of participation and conflict over neighborhood development, is discussed. The resource paper is part of a series designed to supplement existing texts and to fill a gap between research and accessible materials in geography. Part I deals very generally with the implications of…

THE USE OF CHEMICALS AS HERBICIDES. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 6.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF STATE STUDIES, THIS MODULE IS ONE OF A SERIES DESIGNED TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR ENTRY AND ADVANCEMENT IN AGRICULTURAL CHEMICAL OCCUPATIONS. THE SPECIFIC OBJECTIVES OF THIS MODULE ARE TO DEVELOP ABILITIES NECESSARY FOR OCCUPATIONS CONCERNED WITH CHEMICAL WEED…

[Parenting Information: Drugs. Informacion Para los Padres: Sobre las Drojas.

ERIC Educational Resources Information Center

Moreno, Steve

These two booklets provide basic information about drugs and drug abuse and are part of a series of 22 booklets, designed specifically to help parents understand their children and help them to learn. "Let's Talk about Drug Abuse," (booklet #18), reviews foreign substances or drugs young people are often exposed to (i.e., tobacco,…

Exploring our Country's History: Linking Fiction to Nonfiction. Literature Bridges to Social Studies Series.

ERIC Educational Resources Information Center

Perry, Phyllis J.

Fiction is a powerful tool that can motivate students to learn. This book is designed to assist elementary teachers in planning integrated units of study based on quality fiction titles about U.S. history. These titles build interest, illuminate specific eras, and lead students to related nonfiction titles. Organized in sections that cover…

Money Management and the Consumer, Credit: "Ch . a . r . ge!".

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Elementary and Secondary Education.

This unit, one of a series of six Project SCAT (Skills for Consumer Applied Today) units, is designed to help senior high school students develop consumer education skills. For a description of the specific objectives and format of the units, see SO 013 467. This document provides teaching methods, learning activities, and student booklet for a…

Preparing for High Technology: CAD/CAM Programs. Research & Development Series No. 234.

ERIC Educational Resources Information Center

Abram, Robert; And Others

This guide is one of three developed to provide information and resources to assist in planning and developing postsecondary technican training programs in high technology areas. It is specifically intended for vocational-technical educators and planners in the initial stages of planning a specialized training option in computer-aided design (CAD)…

PISA for Development System-Level Data. PISA for Development Brief 18

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

The PISA for Development brief series is a set of concise monthly education policy-oriented notes published by the OECD which are designed to describe a specific PISA for Development topic. In this brief, the role of PISA-D to assesses students' skills and knowledge in three cognitive domains--reading, mathematics and science--and collection of…

THE USE OF CHEMICALS AS PLANT REGULATORS. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 8.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS, THIS MODULE IS SPECIFICALLY CONCERNED WITH CHEMICALS AS PLANT REGULATORS. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF DATA FROM STATE STUDIES. SECTIONS INCLUDE -- (1) CHEMICALS AS MODIFIERS OF PLANT GROWTH, (2)…

Teaching Strategies & Techniques for Adjunct Faculty. Third Edition. Higher Education Series.

ERIC Educational Resources Information Center

Greive, Donald

This booklet presents teaching strategies and techniques in a quick reference format. It was designed specifically to assist adjunct and part-time faculty, who have careers outside of education, to efficiently grasp many of the concepts necessary for effective teaching. Included are a checklist of points to review prior to beginning a teaching…

Looking at the Results. The ACTFL Foreign Language Education Series, Vol. 10.

ERIC Educational Resources Information Center

Omaggio, Alice C.; And Others

This paper attempts to provide a synthesis of the best available knowledge on ways to evaluate the effectiveness of foreiqn language programs. Procedures that have worked well are outlined, an evaluation model is suggested, and a list of specific guidelines, checklists, and other resources is provided. The results of a survey designed to get…

Increase of the Specific Load Under Tension, Compression, and Buckling of Welded Steel Tubes in Airplane Construction by Suitable Treatment of Structural Steel and by Proper Design

NASA Technical Reports Server (NTRS)

Muller, J

1939-01-01

The new construction method indicated, which makes possible a considerably better material utilization and hence a saving in weight, has been tested in a number of Focke-Wulf types also in series production and has fully justified itself.

Fire Safety: Stop the Heat. Fourth Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the fourth grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of fourth grade students, its objectives include: (1) understanding principles of extinguishing fires, (2) investigating issues of peer pressure related to fire setting, (3) developing…

Fire Safe Together. Kindergarten. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the kindergarten component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of kindergarten students, its objectives include developing basic awareness of fire and burn dangers, developing simple actions to reduce injury, and encouraging parent involvement. Texas essential…

Powers and Roots. Fundamentals of Occupational Mathematics. Module 11.

ERIC Educational Resources Information Center

Engelbrecht, Nancy; And Others

This module is the 11th in a series of 12 learning modules designed to teach occupational mathematics. Blocks of informative material and rules are followed by examples and practice problems. The solutions to the practice problems are found at the end of the module. Specific topics covered include multiplication, powers, calculator use, and roots.…

Designing Successful Transitions: A Guide for Orienting Students to College. 3rd Edition. The First-Year Experience Monograph Series No. 13

ERIC Educational Resources Information Center

Ward-Roof, Jeanine A., Ed.

2010-01-01

The 2010 edition of this monograph addresses many topics (e.g., administration of orientation programs, family involvement, student characteristics and needs, assessment, and orientation for specific student populations and institutional types) that were included in previous editions but approaches them with new information, updated data, and…

Geometry and the Design of Product Packaging

ERIC Educational Resources Information Center

Cherico, Cindy M.

2011-01-01

The most common question the author's students ask is, "When will I ever use this in real life?" To address this question in her geometry classes, the author sought to create a project that would incorporate a real-world business situation with their lesson series on the surface area and volume of three-dimensional objects--specifically, prisms,…

Providing the Public with Online Access to Large Bibliographic Data Bases.

ERIC Educational Resources Information Center

Firschein, Oscar; Summit, Roger K.

DIALOG, an interactive, computer-based information retrieval language, consists of a series of computer programs designed to make use of direct access memory devices in order to provide the user with a rapid means of identifying records within a specific memory bank. Using the system, a library user can be provided access to sixteen distinct and…

Identification of Critical Design Points for the EAP of a Space-based Doppler Lidar Wind Sounder

NASA Technical Reports Server (NTRS)

Emmitt, G. D.; Wood, S. A.

1992-01-01

The feasibility of making tropospheric wind measurements with a space-based Doppler lidar was studied by a number of agencies over the past 10-15 years. Currently NASA has a plan to launch such an instrument, the Laser Atmospheric Wind Sounder (LAWS), within the next decade. The design of the LAWS continues to undergo a series of iterations common to most instruments targeted for a space platform. In general, the constraints of available platform power, weight allowance, and project funds continue to change. With these changes the performance and design specifications also must change.

Apollo experience report: Command and service module communications subsystem

NASA Technical Reports Server (NTRS)

Lattier, E. E., Jr.

1974-01-01

The development of spacecraft communications hardware from design to operation is described. Programs, requirements, specifications, and design approaches for a variety of functions (such as voice, telemetry, television, and antennas) are reviewed. Equipment environmental problems such as vibration, extreme temperature variation, and zero gravity are discussed. A review of the development of managerial techniques used in refining the roles of prime and subcontractors is included. The hardware test program is described in detail as it progressed from breadboard design to manned flight system evaluations. Finally, a series of actions is recommended to managers of similar projects to facilitate administration.

Probiotics and Disease: A Comprehensive Summary-Part 1, Mental and Neurological Health.

PubMed

Dolan, Keren E; Finley, Heather J; Burns, Cathleen M; Gasta, Margaret G; Gossard, Crystal M; Parker, Emily C; Pizano, Jessica M; Williamson, Christy B; Lipski, Elizabeth A

2016-10-01

This article series provides a literature review of the disease-specific probiotic strains studied in published clinical trials in humans and animals. The goal of the series is to provide clinically useful tools. The table designs allow for quick access to supportive data related to disease states and will be helpful as a guide for both researchers and clinicians. This first article (part 1) focuses on mental health and neurological conditions. Future articles in this series will review conditions related to cardiometabolic and fatigue syndromes; ear, nose, throat, respiratory, and infectious diseases; immune and dermatological conditions; cancer, gastrointestinal and genitourinary; followed by an article focused on food-based probiotic strains and nutritional supplements. This literature review is specific to condition, probiotic, and strain and also lists currently available products and foods in which these probiotics can be found. In part 1, we explore the role of probiotics in balancing mental health and neurological issues. Conditions in mental health include anxiety, depression, attention-deficit/hyperactivity disorder, and autism. Neurological conditions include age-related cognitive decline, hepatic encephalopathy, cerebral ischemia and reperfusion, traumatic brain injury, and multiple sclerosis.

A Methodological Framework for Model Selection in Interrupted Time Series Studies.

PubMed

Lopez Bernal, J; Soumerai, S; Gasparrini, A

2018-06-06

Interrupted time series is a powerful and increasingly popular design for evaluating public health and health service interventions. The design involves analysing trends in the outcome of interest and estimating the change in trend following an intervention relative to the counterfactual (the expected ongoing trend if the intervention had not occurred). There are two key components to modelling this effect: first, defining the counterfactual; second, defining the type of effect that the intervention is expected to have on the outcome, known as the impact model. The counterfactual is defined by extrapolating the underlying trends observed before the intervention to the post-intervention period. In doing this, authors must consider the pre-intervention period that will be included, any time varying confounders, whether trends may vary within different subgroups of the population and whether trends are linear or non-linear. Defining the impact model involves specifying the parameters that model the intervention, including for instance whether to allow for an abrupt level change or a gradual slope change, whether to allow for a lag before any effect on the outcome, whether to allow a transition period during which the intervention is being implemented and whether a ceiling or floor effect might be expected. Inappropriate model specification can bias the results of an interrupted time series analysis and using a model that is not closely tailored to the intervention or testing multiple models increases the risk of false positives being detected. It is important that authors use substantive knowledge to customise their interrupted time series model a priori to the intervention and outcome under study. Where there is uncertainty in model specification, authors should consider using separate data sources to define the intervention, running limited sensitivity analyses or undertaking initial exploratory studies. Copyright © 2018. Published by Elsevier Inc.

High voltage and current, gate assisted, turn-off thyristor development

NASA Technical Reports Server (NTRS)

Nowalk, T. P.; Brewster, J. B.; Kao, Y. C.

1972-01-01

An improved high speed power switch with unique turn-off capability was developed. This gate assisted turn-off thyristor (GATT) was rated 1000 volts and 100 amperes with turn-off times of 2 microseconds. Fifty units were delivered for evaluation. In addition, test circuits designed to relate to the series inverter application were built and demonstrated. In the course of this work it was determined that the basic device design is adequate to meet the static characteristics and dynamic turn-off specification. It was further determined that the turn-on specification is critically dependent on the gate drive circuit due to the distributive nature of the cathode-gate geometry. Future work should emphasize design modifications which reduce the gate current required for fast turn-on, thereby opening the way to higher power (current) devices.

Advanced photovoltaic solar array - Design and performance

NASA Technical Reports Server (NTRS)

Kurland, Richard; Stella, Paul

1992-01-01

This paper reports on the development of an ultralightweight flexible blanket, flatpack, foldout solar array design that can provide 3- to 4-fold improvement on specific power performance of current rigid panel arrays and a factor of two improvement over a first-generation flexible blanket array developed as a forerunner to the Space Station Freedom array. To date a prototype wing has been built with a projected specific power performance of about 138 W/kg at beginning-of-life (BOL) and 93 W/kg end-of-life (EOL) at 12 kW (BOL) for a 10-year geosynchronous (GEO) mission. The prototype wing hardware has been subjected to a series of system-level tests to demonstrate design feasibility. The design of the array is summarized. The major trade studies that led to the selection of the baseline design are discussed. Key system-level and component-level testing are described. Array-level performance projections are presented as a function of existing and advanced solar array component technology for various mission applications.

Survival Benefit of Japanese Extended Lymphadenectomy for Clinically Node-Negative and Node-Positive Colorectal Cancers.

PubMed

Ouchi, Akira; Komori, Koji; Kimura, Kenya; Kinoshita, Takashi; Shimizu, Yasuhiro; Nagino, Masato

2018-02-01

The impact of extended lymphadenectomy for colorectal cancer is still not sufficiently clear. The aim of the present study was to evaluate the survival benefit of extended lymphadenectomy compared with nonextended lymphadenectomy for clinically node-negative and node-positive colorectal cancers. The present study was a retrospective cohort study that used prospectively collected data and a propensity score matching method. The present study was conducted at a single specialized colorectal surgery department. Of the 1314 patients who underwent radical resection with nonextended or extended lymphadenectomy between 1988 and 2007, we included 711 and 603 patients in the cN0 and cN1/2 series. Propensity score matching was applied, and 141 and 63 pairs were extracted from the cN0 and cN1/2 series. Disease-free survival, cancer-specific survival, and overall survival of the 2 groups were calculated and compared. In the cN0 series, no differences were observed in the long-term outcomes between the nonextended and extended groups. In the cN1/2 series, the disease-free survival, cancer-specific survival and overall survival were significantly higher (log rank, p = 0.04, p = 0.02, and p = 0.01, respectively), and the frequency of local recurrence was significantly lower (p = 0.04) in the extended group. The present study was limited by its nonrandomized retrospective design. Extended lymphadenectomy demonstrated a good inhibitory effect on the local recurrence rate and led to improved disease-free survival, cancer-specific survival, and overall survival of patients in the cN1/2 series. See Video Abstract at http://links.lww.com/DCR/A517.

76 FR 27637 - Supplemental Priorities for Discretionary Grant Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-12

.... Interrupted time series design means a type of quasi-experimental study (as defined in this notice) in which... design is an adaptation of an interrupted time series design that relies on the comparison of treatment... notice), interrupted time series designs (as defined in this notice), or regression discontinuity designs...

75 FR 47284 - Secretary's Priorities for Discretionary Grant Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-05

... the most currently available data. Interrupted time series design \\4\\ means a type of quasi... findings. \\4\\ A single subject or single case design is an adaptation of an interrupted time series design...), interrupted time series designs (as defined in this notice), or regression discontinuity designs (as defined...

Efficacy and Safety of Gabapentin in the Treatment of Chronic Cough: A Systematic Review.

PubMed

Shi, Guanglin; Shen, Qin; Zhang, Caixin; Ma, Jun; Mohammed, Anaz; Zhao, Huan

2018-06-19

Despite recent clinical guidelines, the optimal therapeutic strategy for the management of refractory chronic cough is still a challenge. The present systematic review was designed to assess the evidence for efficacy and safety of gabapentin in the treatment of chronic cough. A systematic search of PubMed, Embase, Cochrane Library databases, and publications cited in bibliographies was performed. Articles were searched by two reviewers with a priori criteria for study selection. Seven relevant articles were identified, including two randomized controlled trials, one prospective case-series designed with consecutive patients, one retrospective case series of consecutive patients, one retrospective case series with unknown consecutive status, and two case reports comprising six and two patients, respectively. Improvements were detected in cough-specific quality of life (Leicester Cough Questionnaire score) and cough severity (visual analogue scale score) following gabapentin treatment in randomized controlled trials. The results of prospective case-series showed that the rate of overall improvement of cough and sensory neuropathy with gabapentin was 68%. Gabapentin treatment of patients with chronic cough showed superior efficacy and a good safety record compared with placebo or standard medications. Additional randomized and controlled trials are needed. Copyright©2018. The Korean Academy of Tuberculosis and Respiratory Diseases.

Application Protocol, Initial Graphics Exchange Specification (IGES), Layered Electrical Product

DOE Office of Scientific and Technical Information (OSTI.GOV)

O`Connell, L.J.

1994-12-01

An application protocol is an information systems engineering view of a specific product The view represents an agreement on the generic activities needed to design and fabricate the product the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transferring some or all of the information required. This application protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining andmore » exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.« less

Layered Electrical Product Application Protocol (AP). Draft: Initial Graphics Exchange Specification (IGES)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-09-01

An application protocol is an information systems engineering view of a specific product. The view represents an agreement on the generic activities needed to design and fabricate the product, the agreement on the information needed to support those activities, and the specific constructs of a product data standard for use in transfering some or all of the information required. This applications protocol describes the data for electrical and electronic products in terms of a product description standard called the Initial Graphics Exchange Specification (IGES). More specifically, the Layered Electrical Product IGES Application Protocol (AP) specifies the mechanisms for defining andmore » exchanging computer-models and their associated data for those products which have been designed in two dimensional geometry so as to be produced as a series of layers in IGES format. The AP defines the appropriateness of the data items for describing the geometry of the various parts of a product (shape and location), the connectivity, and the processing and material characteristics. Excluded is the behavioral requirements which the product was intended to satisfy, except as those requirements have been recorded as design rules or product testing requirements.« less

77 FR 64029 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Design Dive Speed

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

... Series Airplanes; Design Dive Speed AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final... Model A318, A319, A320, and A321 series airplanes because of a novel or unusual design feature, special... Unusual Design Features The Airbus Model A318, A319, and A320 series airplanes with modification 160500...

Parameters Design of Series Resonant Inverter Circuit

NASA Astrophysics Data System (ADS)

Qi, Xingkun; Peng, Yonglong; Li, Yabin

This paper analyzes the main circuit structure of series resonant inverter, and designs the components parameters of the main circuit.That provides a theoretical method for the design of series resonant inverter.

Signal processing and display interface studies. [performance tests - design analysis/equipment specifications

NASA Technical Reports Server (NTRS)

1975-01-01

Signal processing equipment specifications, operating and test procedures, and systems design and engineering are described. Five subdivisions of the overall circuitry are treated: (1) the spectrum analyzer; (2) the spectrum integrator; (3) the velocity discriminator; (4) the display interface; and (5) the formatter. They function in series: (1) first in analog form to provide frequency resolution, (2) then in digital form to achieve signal to noise improvement (video integration) and frequency discrimination, and (3) finally in analog form again for the purpose of real-time display of the significant velocity data. The formatter collects binary data from various points in the processor and provides a serial output for bi-phase recording. Block diagrams are used to illustrate the system.

77 FR 18229 - Applications for New Awards; Investing in Innovation Fund, Validation Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-27

... the appearance of a conflict of interest. Interrupted time series design \\8\\ means a type of quasi... single case design is an adaptation of an interrupted time series design that relies on the comparison of... notice), interrupted time series designs (as defined in this notice), or regression discontinuity designs...

77 FR 18216 - Applications for New Awards; Investing in Innovation Fund, Scale-Up Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-27

... evaluation and prevents even the appearance of a conflict of interest. Interrupted time series design \\8... findings. \\8\\ A single subject or single case design is an adaptation of an interrupted time series design... matched comparison group designs (as defined in this notice), interrupted time series designs (as defined...

76 FR 32171 - Applications for New Awards; Investing in Innovation Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

... conflict of interest. Interrupted time series design \\5\\ means a type of quasi- experimental study in... single case design is an adaptation of an interrupted time series design that relies on the comparison of...), interrupted time series designs (as defined in this notice), or regression discontinuity designs (as defined...

76 FR 32159 - Applications for New Awards; Investing in Innovation Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

... conflict of interest. Interrupted time series design \\5\\ means a type of quasi- experimental study in which... design is an adaptation of an interrupted time series design that relies on the comparison of treatment...), interrupted time series designs (as defined in this notice), or regression discontinuity designs (as defined...

Learning and Celebrating: The Glamour of Design Lecture Series

ERIC Educational Resources Information Center

Popov, Lubomir

2013-01-01

The purpose of this paper is to highlight the celebratory aspect of the Design Lecture Series, a tradition in architecture schools and interior design programs, its meaning for all constituent parties, and its contributions to creating professional identity and community. The Design Lecture Series is a public event popular in design programs,…

A Trip to the Statler Hilton Hotel. The Special Education Curriculum Series.

ERIC Educational Resources Information Center

Kendall, Muriel

A program designed for high school level work-study classes for students of limited mental ability presents specific curriculum methods and materials to teach information regarding positions available in the hotel industry. A field trip tour of the Boston Statler Hilton Hotel if the focal activity of the unit, and is accompanied by a history of…

WWW Motivation Mining: Finding Treasures for Teaching Evaluation Skills, Grades 7-12. Professional Growth Series.

ERIC Educational Resources Information Center

Small, Ruth V.; Arnone, Marilyn P.

Intended for use by middle or high school teachers and library media specialists, this book describes a World Wide Web evaluation tool developed specifically for use by high school students and designed to provide hands-on experience in critically evaluating the strengths and weaknesses of Web sites. The book uses a workbook format and is…

Occupational Home Economics Education Series. Housing Management Services. Competency Based Teaching Module.

ERIC Educational Resources Information Center

Lowe, Phyllis; And Others

This module, one of ten competency based modules developed for vocational home economics teachers, is based on a job cluster in the housing management field. It is designed for a variety of levels of learners (secondary, postsecondary, adult) in both school and non-school settings. Focusing on the specific job title of housing management aide,…

Implementation and Evaluation of the Modified Feeling Great Program for Oncology Children

ERIC Educational Resources Information Center

McCaffrey, C. Nadeane

2006-01-01

Purpose: Designed to reduce anxiety and boost self-concept, The Modified Feeling Great Program (MFGP) consisted of a series of mental training exercises used to improve the quality of life for 6-17 year old children (N=20) with cancer. More specifically, the children were taught how to relax, look for highlights (good things that happen to them),…

Truth: Humanities Unit (Middle and Secondary Grade Levels). Programs for Gifted Students.

ERIC Educational Resources Information Center

Abbott, Barbara; Kolman, Peter

One in a series of instructional units designed for gifted students, this booklet describes a humanities unit for students in middle and secondary grades. The specific focus of the unit is on truth as it is perceived and expressed in philosophy, literature, art, music, drama, and the social sciences. The study of truth and its surrounding concepts…

Parenting Information for Parents: Books 1-3 (Informacion Para Los Padres Sobre La Crianza De Los Hijos: Libros 1-3).

ERIC Educational Resources Information Center

Moreno, Steve

These 3 booklets provide ideas, guidelines, and activities for establishing effective parenting and are part of a series of 22 booklets specifically designed to help parents understand their children and help them to learn. The first booklet (booklet #20) discusses preparation for parenthood, infant and toddler developmental stages, the importance…

Fluid Dynamics Applied to Streams. Physical Processes in Terrestrial and Aquatic Ecosystems, Transport Processes.

ERIC Educational Resources Information Center

Cowan, Christina E.

This module is part of a series designed to be used by life science students for instruction in the application of physical theory to ecosystem operation. Most modules contain computer programs which are built around a particular application of a physical process. This module deals specifically with concepts that are basic to fluid flow and…

Money Management and the Consumer, Banking: "You Can Bank On It".

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Elementary and Secondary Education.

This unit, one of a series of six Project SCAT (Skills for Consumer Applied Today) units, is designed to help senior high school students develop consumer education skills. For a description of the specific objectives and format of the units, see SO 013 467. This document provides learning activities, teaching methods, and a student booklet for a…

Positively Fire Safe. Third Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the third grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of third grade students, its objectives include: (1) acquiring basic knowledge of hazards and safe storage of flammable liquids; and (2) developing positive actions to prevent fires and burns or to…

Money Management and the Consumer, Taxes: "An Offer You Can't Avoid."

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Elementary and Secondary Education.

This unit, one of a series of six Project SCAT (Skills for Consumer Applied Today) units, is designed to help senior high school students develop consumer education skills. For a description of the specific objectives and format of the units, see SO 013 467. This document provides teaching methods, learning activities, and a student booklet for a…

Into Adolescence: Enhancing Self-Esteem. A Curriculum for Grades 5-8. Contemporary Health Series.

ERIC Educational Resources Information Center

Zevin, Dale; McPherson, Carole

This book is a 10-lesson module for grades 5-8, designed to increase students' awareness of self-esteem as a dynamic, ever-changing component in their lives. Beginning with a "Full Esteem Ahead" lesson to help students identify high and low self-esteem behaviors, this module gives teachers specific instructional strategies for guiding students…

Fire Safety's My Job. Eighth Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the eighth grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of eighth grade students, its objectives include: (1) focusing on technical aspects of fire hazards and detection, and (2) exploring fire hazards outside the home. Texas essential elements of…

Fire Safety for Consumers. Economics (High School). Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the high school economics component of a series of curriculum guides on fire and burn prevention. It is designed to meet the age-specific needs of eleventh and twelfth grade students. Objectives include: (1) developing an awareness of adult responsibilities to preserve family, property, and economy; (2) preparing for…

Fire Safety Power. Sixth Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the sixth grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of sixth grade students, its objectives include: (1) developing a comprehensive understanding of fire physics, (2) evaluating electrical hazards and how to respond to those hazards, and (3)…

Fire Safety: Any Time, Any Place. First Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the first grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of first grade students, its objectives include acquiring basic knowledge of fire and burn hazards, developing a basic understanding of simple injury reduction, and encouraging parent involvement.…

Responsible for Fire Safety. Seventh Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the seventh grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of seventh grade students, its objectives include: (1) practicing responsible decision-making regarding fire and burn hazards, including peer pressure related to fire risks; and (2) practicing…

7 CFR 1755.890 - RUS specification for filled telephone cables with expanded insulation.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) The test procedures described in this appendix are for qualification of initial cable designs and... must be made at 23 ±3 °C. (III) Environmental tests—(1) Heat aging test—(a) Test samples. Place one... to allow one end to be accessed for test connections. Cut out a series of 6 millimeter (0.25 inch...

7 CFR 1755.890 - RUS specification for filled telephone cables with expanded insulation.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) The test procedures described in this appendix are for qualification of initial cable designs and... must be made at 23 ±3 °C. (III) Environmental tests—(1) Heat aging test—(a) Test samples. Place one... to allow one end to be accessed for test connections. Cut out a series of 6 millimeter (0.25 inch...

7 CFR 1755.890 - RUS specification for filled telephone cables with expanded insulation.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) The test procedures described in this appendix are for qualification of initial cable designs and... must be made at 23 ±3 °C. (III) Environmental tests—(1) Heat aging test—(a) Test samples. Place one... to allow one end to be accessed for test connections. Cut out a series of 6 millimeter (0.25 inch...

7 CFR 1755.890 - RUS specification for filled telephone cables with expanded insulation.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) The test procedures described in this appendix are for qualification of initial cable designs and... must be made at 23 ±3 °C. (III) Environmental tests—(1) Heat aging test—(a) Test samples. Place one... to allow one end to be accessed for test connections. Cut out a series of 6 millimeter (0.25 inch...

7 CFR 1755.890 - RUS specification for filled telephone cables with expanded insulation.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) The test procedures described in this appendix are for qualification of initial cable designs and... must be made at 23 ±3 °C. (III) Environmental tests—(1) Heat aging test—(a) Test samples. Place one... to allow one end to be accessed for test connections. Cut out a series of 6 millimeter (0.25 inch...

The Free-Form-Five (ff5): A Canadian "Casework" or Furniture and Equipment System for Schools. Programme on Educational Building 4.

ERIC Educational Resources Information Center

Lenssen, Paul

The fourth in a series of leaflets designed for dissemination of information on school building, this publication describes a caseworks subsystem consisting of storage systems, surface systems, plumbing and electrical services, and seating. The technical performance specifications for this subsystem and nine others were developed as a product of…

Effects of Explicit and Implicit Prompts on Students' Inquiry Practices in Computer-Supported Learning Environments in High School Earth Science

ERIC Educational Resources Information Center

Fang, Su-Chi; Hsu, Ying-Shao; Hsu, Wei Hsiu

2016-01-01

The study explored how to best use scaffolds for supporting students' inquiry practices in computer-supported learning environments. We designed a series of inquiry units assisted with three versions of written inquiry prompts (generic and context-specific); that is, three scaffold-fading conditions: implicit, explicit, and fading. We then…

Teacher's Guide to the Algonquins: The MATCH Box Project; Prototype Edition.

ERIC Educational Resources Information Center

Butler, Eva; And Others

What better way is there to learn about something than to hold it, examine it, and take it apart? The Match Box Project (Materials and Activities for Teachers and Children) loans to schools a series of boxes which contain materials, equipment, supplies, and activities designed as a unit to foster the teaching/learning of specific subjects at the…

Low cost solar array project production process and equipment task: A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Several major modifications were made to the design presented at the PDR. The frame was deleted in favor of a "frameless" design which will provide a substantially improved cell packing factor. Potential shaded cell damage resulting from operation into a short circuit can be eliminated by a change in the cell series/parallel electrical interconnect configuration. The baseline process sequence defined for the MEPSON was refined and equipment design and specification work was completed. SAMICS cost analysis work accelerated, format A's were prepared and computer simulations completed. Design work on the automated cell interconnect station was focused on bond technique selection experiments.

Temporomandibular disorders. Part 2: conservative management

PubMed Central

Shaffer, Stephen M; Brismée, Jean-Michel; Sizer, Phillip S; Courtney, Carol A

2014-01-01

Appropriate management of temporomandibular disorders (TMD) requires an understanding of the underlying dysfunction associated with the temporomandibular joint (TMJ) and surrounding structures. A comprehensive examination process, as described in part 1 of this series, can reveal underlying clinical findings that assist in the delivery of comprehensive physical therapy services for patients with TMD. Part 2 of this series focuses on management strategies for TMD. Physical therapy is the preferred conservative management approach for TMD. Physical therapists are professionally well-positioned to step into the void and provide clinical services for patients with TMD. Clinicians should utilize examination findings to design rehabilitation programs that focus on addressing patient-specific impairments. Potentially appropriate plan of care components include joint and soft tissue mobilization, trigger point dry needling, friction massage, therapeutic exercise, patient education, modalities, and outside referral. Management options should address both symptom reduction and oral function. Satisfactory results can often be achieved when management focuses on patient-specific clinical variables. PMID:24976744

Teaching Self-concept and Self-esteem in a Clinical Communications Course

PubMed Central

2006-01-01

Effective interpersonal communication skills are needed for pharmacists to deliver patient-centered care. To achieve this outcome with pharmacists, communication skills are emphasized in pharmacy school in required coursework, such as a clinical communication course. One important concept to include in communication coursework is content on perceptions because perceptions influence communication interactions. Specific emphasis should include a focus on self-perceptions and self-concept, because related empirical literature demonstrates that accurate academic self-concepts predict academic success. These results were extrapolated to a pharmacy clinical communications course where a lecture and laboratory series was designed to emphasize self-concept and facilitate communication skills improvement. The instructional design of this series promoted the advancement of students’ communication skills by using communication inventories, self-reflection activities, peer and class discussion, and lecture content. Class discussions, self-reflections, and baseline, and follow-up counseling activities throughout the semester provided evidence of improvements. PMID:17149428

Teaching self-concept and self-esteem in a clinical communications course.

PubMed

Medina, Melissa S

2006-10-15

Effective interpersonal communication skills are needed for pharmacists to deliver patient-centered care. To achieve this outcome with pharmacists, communication skills are emphasized in pharmacy school in required coursework, such as a clinical communication course. One important concept to include in communication coursework is content on perceptions because perceptions influence communication interactions. Specific emphasis should include a focus on self-perceptions and self-concept, because related empirical literature demonstrates that accurate academic self-concepts predict academic success. These results were extrapolated to a pharmacy clinical communications course where a lecture and laboratory series was designed to emphasize self-concept and facilitate communication skills improvement. The instructional design of this series promoted the advancement of students' communication skills by using communication inventories, self-reflection activities, peer and class discussion, and lecture content. Class discussions, self-reflections, and baseline, and follow-up counseling activities throughout the semester provided evidence of improvements.

Team Training for Dynamic Cross-Functional Teams in Aviation: Behavioral, Cognitive, and Performance Outcomes.

PubMed

Littlepage, Glenn E; Hein, Michael B; Moffett, Richard G; Craig, Paul A; Georgiou, Andrea M

2016-12-01

This study evaluates the effectiveness of a training program designed to improve cross-functional coordination in airline operations. Teamwork across professional specializations is essential for safe and efficient airline operations, but aviation education primarily emphasizes positional knowledge and skill. Although crew resource management training is commonly used to provide some degree of teamwork training, it is generally focused on specific specializations, and little training is provided in coordination across specializations. The current study describes and evaluates a multifaceted training program designed to enhance teamwork and team performance of cross-functional teams within a simulated airline flight operations center. The training included a variety of components: orientation training, position-specific declarative knowledge training, position-specific procedural knowledge training, a series of high-fidelity team simulations, and a series of after-action reviews. Following training, participants demonstrated more effective teamwork, development of transactive memory, and more effective team performance. Multifaceted team training that incorporates positional training and team interaction in complex realistic situations and followed by after-action reviews can facilitate teamwork and team performance. Team training programs, such as the one described here, have potential to improve the training of aviation professionals. These techniques can be applied to other contexts where multidisciplinary teams and multiteam systems work to perform highly interdependent activities. © 2016, Human Factors and Ergonomics Society.

Metal stabilization of collagen and de novo designed mimetic peptides

PubMed Central

Parmar, Avanish S.; Xu, Fei; Pike, Douglas H.; Belure, Sandeep V.; Hasan, Nida F.; Drzewiecki, Kathryn E.; Shreiber, David I.; Nanda, Vikas

2017-01-01

We explore the design of metal binding sites to modulate triple-helix stability of collagen and collagen-mimetic peptides. Globular proteins commonly utilize metals to connect tertiary structural elements that are well separated in sequence, constraining structure and enhancing stability. It is more challenging to engineer structural metals into fibrous protein scaffolds, which lack the extensive tertiary contacts seen in globular proteins. In the collagen triple helix, the structural adjacency of the carboxy-termini of the three chains makes this region an attractive target for introducing metal binding sites. We engineered His3 sites based on structural modeling constraints into a series of designed homotrimeric and heterotrimeric peptides, assessing the capacity of metal binding to improve stability and in the case of heterotrimers, affect specificity of assembly. Notable enhancements in stability for both homo and heteromeric systems were observed upon addition of zinc(II) and several other metal ions only when all three histidine ligands were present. Metal binding affinities were consistent with the expected Irving-Williams series for imidazole. Unlike other metals tested, copper(II) also bound to peptides lacking histidine ligands. Acetylation of the peptide N-termini prevented copper binding, indicating proline backbone amide metal-coordination at this site. Copper similarly stabilized animal extracted Type I collagen in a metal specific fashion, highlighting the potential importance of metal homeostasis within the extracellular matrix. PMID:26225466

Metal Stabilization of Collagen and de Novo Designed Mimetic Peptides.

PubMed

Parmar, Avanish S; Xu, Fei; Pike, Douglas H; Belure, Sandeep V; Hasan, Nida F; Drzewiecki, Kathryn E; Shreiber, David I; Nanda, Vikas

2015-08-18

We explore the design of metal binding sites to modulate triple-helix stability of collagen and collagen-mimetic peptides. Globular proteins commonly utilize metals to connect tertiary structural elements that are well separated in sequence, constraining structure and enhancing stability. It is more challenging to engineer structural metals into fibrous protein scaffolds, which lack the extensive tertiary contacts seen in globular proteins. In the collagen triple helix, the structural adjacency of the carboxy-termini of the three chains makes this region an attractive target for introducing metal binding sites. We engineered His3 sites based on structural modeling constraints into a series of designed homotrimeric and heterotrimeric peptides, assessing the capacity of metal binding to improve stability and in the case of heterotrimers, affect specificity of assembly. Notable enhancements in stability for both homo- and heteromeric systems were observed upon addition of zinc(II) and several other metal ions only when all three histidine ligands were present. Metal binding affinities were consistent with the expected Irving-Williams series for imidazole. Unlike other metals tested, copper(II) also bound to peptides lacking histidine ligands. Acetylation of the peptide N-termini prevented copper binding, indicating proline backbone amide metal-coordination at this site. Copper similarly stabilized animal extracted Type I collagen in a metal-specific fashion, highlighting the potential importance of metal homeostasis within the extracellular matrix.

Thin-film module circuit design: Practical and reliability aspects

NASA Technical Reports Server (NTRS)

Daiello, R. V.; Twesme, E. N.

1985-01-01

This paper will address several aspects of the design and construction of submodules based on thin film amorphous silicon (a-Si) p i n solar cells. Starting from presently attainable single cell characteristics, and a realistic set of specifications, practical module designs are discussed from the viewpoints of efficient designs, the fabrication requirements, and reliability concerns. The examples center mostly on series interconnected modules of the superstrate type with detailed discussions of each portion of the structure in relation to its influence on module efficiency. Emphasis is placed on engineering topics such as: area coverage, optimal geometries, and cost and reliability. Practical constraints on achieving optimal designs, along with some examples of potential pitfalls in the manufacture and subsequent performance of a-Si modules are discussed.

49 CFR 180.212 - Repair of seamless DOT 3-series specification cylinders and seamless UN pressure receptacles.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Repair of seamless DOT 3-series specification..., Maintenance and Use of Cylinders § 180.212 Repair of seamless DOT 3-series specification cylinders and seamless UN pressure receptacles. (a) General requirements for repair of DOT 3-series cylinders and UN...

Enhancing healthcare process design with human factors engineering and reliability science, part 2: applying the knowledge to clinical documentation systems.

PubMed

Boston-Fleischhauer, Carol

2008-02-01

The demand to redesign healthcare processes that achieve efficient, effective, and safe results is never-ending. Part 1 of this 2-part series introduced human factors engineering and reliability science as important knowledge to enhance existing operational and clinical process design methods in healthcare organizations. In part 2, the author applies this knowledge to one of the most common operational processes in healthcare: clinical documentation. Specific implementation strategies and anticipated results are discussed, along with organizational challenges and recommended executive responses.

Project FIRES. Volume 1: Program Overview and Summary, Phase 1B

NASA Technical Reports Server (NTRS)

Abeles, F. J.

1980-01-01

Overall performance requirements and evaluation methods for firefighters protective equipment were established and published as the Protective Ensemble Performance Standards (PEPS). Current firefighters protective equipment was tested and evaluated against the PEPS requirements, and the preliminary design of a prototype protective ensemble was performed. In phase 1B, the design of the prototype ensemble was finalized. Prototype ensembles were fabricated and then subjected to a series of qualification tests which were based upon the PEPS requirements. Engineering drawings and purchase specifications were prepared for the new protective ensemble.

Challenges of Cold Conditioning and Static Testing the Ares Demonstration Motor (DM-2)

NASA Technical Reports Server (NTRS)

Quinn, Shyla; Davis, Larry C.

2011-01-01

The Ares first stage rocket is a "human-rated" motor capable of producing and sustaining 3.5 million pounds of thrust throughout it s two-minute burn period. A series of demonstration motors (DM) will be tested in different conditioned environments to confirm they meet all design specifications. The second demonstration motor (DM-2) was designated to be a "cold motor", this means the internal propellant mean bulk temperature (PMBT) was 40 +5\\-3 F. The motor was subjected to subfreezing temperatures for two months.

77 FR 11087 - Applications for New Awards; Investing in Innovation Fund, Development Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... prevents even the appearance of a conflict of interest. Interrupted time series design \\8\\ means a type of.... \\8\\ A single subject or single case design is an adaptation of an interrupted time series design that... matched comparison group designs (as defined in this notice), interrupted time series designs (as defined...

75 FR 12072 - Office of Innovation and Improvement; Overview Information: Investing in Innovation Fund; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-12

... matched comparison group designs (as defined in this notice), interrupted time series designs (as defined... reading skills administered in the same way to both groups). Interrupted time series design \\3\\ means a... findings. \\3\\ A single subject or single case design is an adaptation of an interrupted time series design...

3. "TEST STAND NO. 13, EXCAVATION PLAN & SECTIONS." Specifications ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. "TEST STAND NO. 1-3, EXCAVATION PLAN & SECTIONS." Specifications No. ENG 04-353-50-10; Drawing No. 60-0906; no sheet number within title block; D.O. SERIES 1109/10. Stamped: AS BUILT. No revisions or revision dates. Last work date on this drawing "Checked by EAG, 1/31/49." Though this drawing is specific to Test Stand 1-3, it also illustrates the general methods used for excavation design and retaining wall construction at Test Stand 1-5. - Edwards Air Force Base, Air Force Rocket Propulsion Laboratory, Test Stand 1-3, Test Area 1-115, northwest end of Saturn Boulevard, Boron, Kern County, CA

Design of the hairpin ribozyme for targeting specific RNA sequences.

PubMed

Hampel, A; DeYoung, M B; Galasinski, S; Siwkowski, A

1997-01-01

The following steps should be taken when designing the hairpin ribozyme to cleave a specific target sequence: 1. Select a target sequence containing BN*GUC where B is C, G, or U. 2. Select the target sequence in areas least likely to have extensive interfering structure. 3. Design the conventional hairpin ribozyme as shown in Fig. 1, such that it can form a 4 bp helix 2 and helix 1 lengths up to 10 bp. 4. Synthesize this ribozyme from single-stranded DNA templates with a double-stranded T7 promoter. 5. Prepare a series of short substrates capable of forming a range of helix 1 lengths of 5-10 bp. 6. Identify these by direct RNA sequencing. 7. Assay the extent of cleavage of each substrate to identify the optimal length of helix 1. 8. Prepare the hairpin tetraloop ribozyme to determine if catalytic efficiency can be improved.

Thermal design of the IMP-I and H spacecraft

NASA Technical Reports Server (NTRS)

Hoffman, R. H.

1974-01-01

A description of the thermal subsystem of the IMP-I and H spacecraft is presented. These two spacecraft were of a larger and more advanced type in the Explorer series and were successfully launched in March 1971 and September 1972. The thermal requirements, analysis, and design of each spacecraft are described including several specific designs for individual experiments. Techniques for obtaining varying degrees of thermal isolation and contact are presented. The thermal control coatings including the spaceflight performance of silver-coated FEP Teflon are discussed. Predicted performance is compared to measured flight data. The good agreement between them verifies the validity of the thermal model and the selection of coatings.

Causal Inference and the Comparative Interrupted Time Series Design: Findings from Within-Study Comparisons

ERIC Educational Resources Information Center

St. Clair, Travis; Hallberg, Kelly; Cook, Thomas D.

2014-01-01

Researchers are increasingly using comparative interrupted time series (CITS) designs to estimate the effects of programs and policies when randomized controlled trials are not feasible. In a simple interrupted time series design, researchers compare the pre-treatment values of a treatment group time series to post-treatment values in order to…

78 FR 36084 - Special Conditions: The Boeing Company, Model 717-200 Series Airplanes; Seats With Inflatable...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-17

... 717- 200 series airplanes. These airplanes will have a novel or unusual design feature [[Page 36085... series airplanes will incorporate the following novel or unusual design features: inflatable lapbelts on... certain novel or unusual design features on one model series of airplanes. It is not a rule of general...

78 FR 68775 - Special Conditions: Airbus, Model A350-900 Series Airplane; Composite Fuselage In-Flight Fire...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-15

... Model A350-900 series airplanes. This airplane will have a novel or unusual design features associated... Model A350-900 series because of a novel or unusual design feature, special conditions are prescribed... Airbus Model A350-900 series airplane will incorporate the following novel or unusual design features...

78 FR 76980 - Special Conditions: Airbus, A350-900 Series Airplane; Interaction of Systems and Structures

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-20

... series airplanes. These airplanes will have novel or unusual design features when compared to the state...-900 series because of a novel or unusual design feature, special conditions are prescribed under Sec...)(2). Novel or Unusual Design Features The Airbus Model A350-900 series will incorporate the following...

Mesoscopic Community Structure of Financial Markets Revealed by Price and Sign Fluctuations.

PubMed

Almog, Assaf; Besamusca, Ferry; MacMahon, Mel; Garlaschelli, Diego

2015-01-01

The mesoscopic organization of complex systems, from financial markets to the brain, is an intermediate between the microscopic dynamics of individual units (stocks or neurons, in the mentioned cases), and the macroscopic dynamics of the system as a whole. The organization is determined by "communities" of units whose dynamics, represented by time series of activity, is more strongly correlated internally than with the rest of the system. Recent studies have shown that the binary projections of various financial and neural time series exhibit nontrivial dynamical features that resemble those of the original data. This implies that a significant piece of information is encoded into the binary projection (i.e. the sign) of such increments. Here, we explore whether the binary signatures of multiple time series can replicate the same complex community organization of the financial market, as the original weighted time series. We adopt a method that has been specifically designed to detect communities from cross-correlation matrices of time series data. Our analysis shows that the simpler binary representation leads to a community structure that is almost identical with that obtained using the full weighted representation. These results confirm that binary projections of financial time series contain significant structural information.

76 FR 32148 - Applications for New Awards; Investing in Innovation Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

.... Interrupted time series design \\5\\ means a type of quasi- experimental study in which the outcome of interest... interrupted time series design that relies on the comparison of treatment effects on a single subject or group... matched comparison group designs (as defined in this notice), interrupted time series designs (as defined...

Adding a Time-Series Design Element to the Success Case Method to Improve Methodological Rigor: An Application for Nonprofit Program Evaluation

ERIC Educational Resources Information Center

Coryn, Chris L. S.; Schroter, Daniela C.; Hanssen, Carl E.

2009-01-01

Brinkerhoff's Success Case Method (SCM) was developed with the specific purpose of assessing the impact of organizational interventions (e.g., training and coaching) on business goals by analyzing extreme groups using case study techniques and storytelling. As an efficient and cost-effective method of evaluative inquiry, SCM is attractive in other…

Helping Teachers Become Inservice Facilitators. A Training Program to Develop School-Based Inservice Planning Teams. Seventh Edition. Inservice Series No. 6.

ERIC Educational Resources Information Center

Wilson, Mary Alice B.

This manual is designed for the training of inservice facilitator teams, which include regular and special education teachers, administrators, and other school district staff. Inservice facilitator teams are defined as teams which develop inservice programs for their school system. Each chapter focuses on a specific skill for the training teams;…

Federal Aviation Administration Aviation Education Teacher's Guide, [Grades] 4-6.

ERIC Educational Resources Information Center

Federal Aviation Administration (DOT), Washington, DC.

This guide is one in a series of four resource guides specifically designed for those interested in aviation education. Activities and lessons that can be used in a variety of content areas and grade levels are featured. Grades 4-6 are the focus of this guide, which is organized under the broad topics of properties of air, lighter than air flight,…

What a Shock: No Apoptosis without Heat Shock Protein 90α | Center for Cancer Research

Cancer.gov

Apoptosis, also known as programmed cell death, consists of a series of reactions designed to systematically chop up a cell and its contents. The process is used to eliminate specific cells during development or to remove old or damaged cells without harming any surrounding cells. Since cancer cells can develop mechanisms to avoid apoptosis, researchers may be able to identify

Bilingual Encounters: Spanish-English Medical and Legal Dialogues. A Practical Resource for Educators and Students of Interpreting. Interpreting and Translation Publications Series, No. 1.

ERIC Educational Resources Information Center

Hale, Sandra

Thirty-eight dialogues are presented, each illustrating a common, real-life interpreting situation involving medical and/or legal issues and terminology. Each involves both Spanish and English languages, and the situations are specific to New South Wales, Australia. They are designed to be used as a resource in teaching interpreting. The…

A Lifetime for Fire Safety. Health (High School). Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the high school health component of a series of curriculum guides on fire and burn prevention. It is designed to meet the age-specific needs of ninth and tenth grade students. Objectives include: (1) reviewing comprehensive fire and burn prevention techniques and emergency actions; (2) developing an awareness of fire safety…

Program Level Feedback from Former Occupational Education Students: Report 1 of 2, Summary Findings of Respondents District-Wide. Research Brief.

ERIC Educational Resources Information Center

Glyer-Culver, Betty

In fall 2000, the staff of Los Rios Community College District Office of Institutional Research collaborated with occupational education deans, academic area deans, and faculty to develop a series of program-specific followup surveys to be administered in spring 2001. These surveys were designed to determine how well courses met the employment and…

Summary of the Adolescent Literacy Workshop: State of the Science and Research Needs. Adolescent Literacy--Research Informing Practice: A Series of Workshops.

ERIC Educational Resources Information Center

Department of Education, Washington, DC.

This workshop was the first of two designed for the purpose of developing specific recommendations for a program of research on adolescent literacy. Together these workshops, jointly sponsored by government and private sector entities, will draw on the knowledge and experiences of researchers and practitioners who work with adolescents and their…

Making Me Fire Safe. Second Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the second grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of second grade students, its objectives include acquiring basic understanding of how to prevent and put out fires and developing greater self-direction to prevent and react to fire, smoke, or burn…

Charged Up for Fire Safety. Fifth Grade. Fire Safety for Texans: Fire and Burn Prevention Curriculum Guide.

ERIC Educational Resources Information Center

Texas State Commission on Fire Protection, Austin.

This booklet comprises the fifth grade component of a series of curriculum guides on fire and burn prevention. Designed to meet the age-specific needs of fifth grade students, its objectives include: (1) exploring heating equipment safety, (2) analyzing the impact of fire on the outdoor environment and methods to reduce that impact, (3) developing…

Take-off and Landing

DTIC Science & Technology

1975-01-01

Studies Program. The results of AGARD work are reported to the member nations and the NATO Authorities through the AGARD series of publications of...calculated based on a low altitude mission profile. 2. GROUND RULES AND BASIC ASSUMPTIONS Base Design All aircraft synthesized for this study are...In this study manoeuverability is defined in terms of specific excess power (as shown in Fig. 5) at specified Mach number, altitude,and load

Extreme triple asymmetric (ETAS) epitaxial designs for increased efficiency at high powers in 9xx-nm diode lasers

NASA Astrophysics Data System (ADS)

Kaul, T.; Erbert, G.; Maaßdorf, A.; Martin, D.; Crump, P.

2018-02-01

Broad area lasers that are tailored to be most efficient at the highest achievable optical output power are sought by industry to decrease operation costs and improve system performance. Devices using Extreme-Double-ASymmetric (EDAS) epitaxial designs are promising candidates for improved efficiency at high optical output powers due to low series resistance, low optical loss and low carrier leakage. However, EDAS designs leverage ultra-thin p-side waveguides, meaning that the optical mode is shifted into the n-side waveguide, resulting in a low optical confinement in the active region, low gain and hence high threshold current, limiting peak performance. We introduce here explicit design considerations that enable EDAS-based devices to be developed with increased optical confinement in the active layer without changing the p-side layer thicknesses. Specifically, this is realized by introducing a third asymmetric component in the vicinity of the quantum well. We call this approach Extreme-Triple-ASymmetric (ETAS) design. A series of ETAS-based vertical designs were fabricated into broad area lasers that deliver up to 63% power conversion efficiency at 14 W CW optical output power from a 100 μm stripe laser, which corresponds to the operation point of a kW optical output power in a laser bar. The design process, the impact of structural changes on power saturation mechanisms and finally devices with improved performance will be presented.

High speed, precision motion strategies for lightweight structures

NASA Technical Reports Server (NTRS)

Book, Wayne J.

1987-01-01

Abstracts of published papers and dissertations generated during the reporting period are compiled. Work on fine motion control was completed. Specifically, real time control of flexible manipulator vibrations were experimentally investigated. A linear model based on the application of Lagrangian dynamics to a rigid body mode and a series of separable flexible modes was examined with respect to model order requirements, and modal candidate selection. State feedback control laws were implemented based upon linear quadratic regulator design. Specification of the closed loop poles in the regulator design process was obtained by inclusion of a prescribed degree of stability in the manipulator model. Work on gross motion planning and control is also summarized. A systematic method to symbolically derive the full nonlinear dynamic equations of motion of multi-link flexible manipulators was developed.

Toward rules relating zinc finger protein sequences and DNA binding site preferences.

PubMed

Desjarlais, J R; Berg, J M

1992-08-15

Zinc finger proteins of the Cys2-His2 type consist of tandem arrays of domains, where each domain appears to contact three adjacent base pairs of DNA through three key residues. We have designed and prepared a series of variants of the central zinc finger within the DNA binding domain of Sp1 by using information from an analysis of a large data base of zinc finger protein sequences. Through systematic variations at two of the three contact positions (underlined), relatively specific recognition of sequences of the form 5'-GGGGN(G or T)GGG-3' has been achieved. These results provide the basis for rules that may develop into a code that will allow the design of zinc finger proteins with preselected DNA site specificity.

78 FR 75511 - Special Conditions: Bombardier Inc., Models BD-500-1A10 and BD-500-1A11 Series Airplanes...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-12

... Design Features The C-series airplanes will incorporate the following novel or unusual design features: A.... Conclusion This action affects only certain novel or unusual design features on two model series of airplanes... Inc., Models BD-500-1A10 and BD- 500-1A11 Series Airplanes; Electronic Flight Control System: Control...

76 FR 9331 - Professional Development for Arts Educators Program; Office of Innovation and Improvement...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-17

... adaptation of an interrupted time series design that relies on the comparison of treatment effects on a... group designs (as defined in this notice), interrupted time series designs (as defined in this notice... series design means a type of quasi-experimental study (as defined in this notice) in which the outcome...

Construct-a-Greenhouse. Science by Design Series.

ERIC Educational Resources Information Center

Lee, Felicia

This book is one of four books in the Science-by-Design Series created by TERC and funded by the National Science Foundation (NSF). This series presents directed instruction on how to successfully formulate and carry out product design. Students learn and apply concepts in science and technology to design and build a pair of insulated gloves, a…

The Value of Interrupted Time-Series Experiments for Community Intervention Research

PubMed Central

Biglan, Anthony; Ary, Dennis; Wagenaar, Alexander C.

2015-01-01

Greater use of interrupted time-series experiments is advocated for community intervention research. Time-series designs enable the development of knowledge about the effects of community interventions and policies in circumstances in which randomized controlled trials are too expensive, premature, or simply impractical. The multiple baseline time-series design typically involves two or more communities that are repeatedly assessed, with the intervention introduced into one community at a time. It is particularly well suited to initial evaluations of community interventions and the refinement of those interventions. This paper describes the main features of multiple baseline designs and related repeated-measures time-series experiments, discusses the threats to internal validity in multiple baseline designs, and outlines techniques for statistical analyses of time-series data. Examples are given of the use of multiple baseline designs in evaluating community interventions and policy changes. PMID:11507793

lcps: Light curve pre-selection

NASA Astrophysics Data System (ADS)

Schlecker, Martin

2018-05-01

lcps searches for transit-like features (i.e., dips) in photometric data. Its main purpose is to restrict large sets of light curves to a number of files that show interesting behavior, such as drops in flux. While lcps is adaptable to any format of time series, its I/O module is designed specifically for photometry of the Kepler spacecraft. It extracts the pre-conditioned PDCSAP data from light curves files created by the standard Kepler pipeline. It can also handle csv-formatted ascii files. lcps uses a sliding window technique to compare a section of flux time series with its surroundings. A dip is detected if the flux within the window is lower than a threshold fraction of the surrounding fluxes.

Nuclear Electric Propulsion Application: RASC Mission Robotic Exploration of Venus

NASA Technical Reports Server (NTRS)

McGuire, Melissa L.; Borowski, Stanley K.; Packard, Thomas W.

2004-01-01

The following paper documents the mission and systems analysis portion of a study in which Nuclear Electric Propulsion (NEP) is used as the in-space transportation system to send a series of robotic rovers and atmospheric science airplanes to Venus in the 2020 to 2030 timeframe. As part of the NASA RASC (Revolutionary Aerospace Systems Concepts) program, this mission analysis is meant to identify future technologies and their application to far reaching NASA missions. The NEP systems and mission analysis is based largely on current technology state of the art assumptions. This study looks specifically at the performance of the NEP transfer stage when sending a series of different payload package point design options to Venus orbit.

Note: Characterization and test of a high input impedance RF amplifier for series nanowire detector

NASA Astrophysics Data System (ADS)

Wan, Chao; Pei, Yufeng; Jiang, Zhou; Kang, Lin; Wu, Peiheng

2016-09-01

We designed a high input impedance RF amplifier based on Tower Jazz's 0.18 μm SiGe BiCMOS process for series nanowire detector. The characterization of its gain and input impedance with a vector network analyzer is described in detail for its specificity. The actual 15 dB gain should be the measured value subtracts 6 dB, which is easy to be ignored. Its input impedance can be equivalent to 6.7 kΩ ∥ 3.4 pF though fitting the measurement, whose accuracy is verified. The process of measurement provides a good reference to characterize the similar special amplifier with unmatched impedance.

Principles for designing proteins with cavities formed by curved β sheets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marcos, Enrique; Basanta, Benjamin; Chidyausiku, Tamuka M.

Active sites and ligand-binding cavities in native proteins are often formed by curved β sheets, and the ability to control β-sheet curvature would allow design of binding proteins with cavities customized to specific ligands. Toward this end, we investigated the mechanisms controlling β-sheet curvature by studying the geometry of β sheets in naturally occurring protein structures and folding simulations. The principles emerging from this analysis were used to design, de novo, a series of proteins with curved β sheets topped with α helices. Nuclear magnetic resonance and crystal structures of the designs closely match the computational models, showing that β-sheetmore » curvature can be controlled with atomic-level accuracy. Our approach enables the design of proteins with cavities and provides a route to custom design ligand-binding and catalytic sites.« less

TRL - A FORMAL TEST REPRESENTATION LANGUAGE AND TOOL FOR FUNCTIONAL TEST DESIGNS

NASA Technical Reports Server (NTRS)

Hops, J. M.

1994-01-01

A Formal Test Representation Language and Tool for Functional Test Designs (TRL) is an automatic tool and a formal language that is used to implement the Category-Partition Method and produce the specification of test cases in the testing phase of software development. The Category-Partition Method is particularly useful in defining the inputs, outputs and purpose of the test design phase and combines the benefits of choosing normal cases with error exposing properties. Traceability can be maintained quite easily by creating a test design for each objective in the test plan. The effort to transform the test cases into procedures is simplified by using an automatic tool to create the cases based on the test design. The method allows the rapid elimination of undesired test cases from consideration, and easy review of test designs by peer groups. The first step in the category-partition method is functional decomposition, in which the specification and/or requirements are decomposed into functional units that can be tested independently. A secondary purpose of this step is to identify the parameters that affect the behavior of the system for each functional unit. The second step, category analysis, carries the work done in the previous step further by determining the properties or sub-properties of the parameters that would make the system behave in different ways. The designer should analyze the requirements to determine the features or categories of each parameter and how the system may behave if the category were to vary its value. If the parameter undergoing refinement is a data-item, then categories of this data-item may be any of its attributes, such as type, size, value, units, frequency of change, or source. After all the categories for the parameters of the functional unit have been determined, the next step is to partition each category's range space into mutually exclusive values that the category can assume. In choosing partition values, all possible kinds of values should be included, especially the ones that will maximize error detection. The purpose of the final step, partition constraint analysis, is to refine the test design specification so that only the technically effective and economically feasible test cases are implied. TRL is written in C-language to be machine independent. It has been successfully implemented on an IBM PC compatible running MS DOS, a Sun4 series computer running SunOS, an HP 9000/700 series workstation running HP-UX, a DECstation running DEC RISC ULTRIX, and a DEC VAX series computer running VMS. TRL requires 1Mb of disk space and a minimum of 84K of RAM. The documentation is available in electronic form in Word Perfect format. The standard distribution media for TRL is a 5.25 inch 360K MS-DOS format diskette. Alternate distribution media and formats are available upon request. TRL was developed in 1993 and is a copyrighted work with all copyright vested in NASA.

Design Drivers of Water Data Services

NASA Astrophysics Data System (ADS)

Valentine, D.; Zaslavsky, I.

2008-12-01

The CUAHSI Hydrologic Information System (HIS) is being developed as a geographically distributed network of hydrologic data sources and functions that are integrated using web services so that they function as a connected whole. The core of the HIS service-oriented architecture is a collection of water web services, which provide uniform access to multiple repositories of observation data. These services use SOAP protocols communicating WaterML (Water Markup Language). When a client makes a data or metadata request using a CUAHSI HIS web service, these requests are made in standard manner, following the CUAHSI HIS web service signatures - regardless of how the underlying data source may be organized. Also, regardless of the format in which the data are returned by the source, the web services respond to requests by returning the data in a standard format of WaterML. The goal of WaterML design has been to capture semantics of hydrologic observations discovery and retrieval and express the point observations information model as an XML schema. To a large extent, it follows the representation of the information model as adopted by the CUASHI Observations Data Model (ODM) relational design. Another driver of WaterML design is specifications and metadata adopted by USGS NWIS, EPA STORET, and other federal agencies, as it seeks to provide a common foundation for exchanging both agency data and data collected in multiple academic projects. Another WaterML design principle was to create, in version 1 of HIS in particular, a fairly rigid and simple XML schema which is easy to generate and parse, thus creating the least barrier for adoption by hydrologists. WaterML includes a series of elements that reflect common notions used in describing hydrologic observations, such as site, variable, source, observation series, seriesCatalog, and data values. Each of the three main request methods in the water web services - GetSiteInfo, GetVariableInfo, and GetValues - has a corresponding response element in WaterML: SitesResponse, VariableResponse, and TimeSeriesResponse. The WaterML specification is being adopted by federal agencies. The experimental USGS NWIS Daily Values web service returns WaterML-compliant TImeSeriesResponse. The National Climatic Data Center is also prototyping WaterML for data delivery, and has developed a REST-based service that generates WaterML- compliant output for the NCDC ASOS network. Such agency-supported web services coming online provide a much more efficient way to deliver agency data compared to the web site scraper services that the CUAHSI HIS project has developed initially. The CUAHSI water data web services will continue to serve as the main communication mechanism within CUAHSI HIS, connecting a variety of data sources with a growing set of web service clients being developed in both academia and the commercial sector. The driving forces for the development of web services continue to be: - Application experience and needs of the growing number of CUAHSI HIS users, who experiment with additional data types, analysis modes, data browsing and searching strategies, and provide feedback to WaterML developers; - Data description requirements posed by various federal and state agencies; - Harmonization with standards being adopted or developed in neighboring communities, in particular the relevant standards being explored within the Open Geospatial Consortium. CUAHSI WaterML is a standard output schema for CUAHSI HIS water web services. Its formal specification is available as OGC discussion paper at www.opengeospatial.org/standards/dp/ class="ab'>

More on Time Series Designs: A Reanalysis of Mayer and Kozlow's Data.

ERIC Educational Resources Information Center

Willson, Victor L.

1982-01-01

Differentiating between time-series design and time-series analysis, examines design considerations and reanalyzes data previously reported by Mayer and Kozlow in this journal. The current analysis supports the analysis performed by Mayer and Kozlow but puts the results on a somewhat firmer statistical footing. (Author/JN)

A simplified design of the staggered herringbone micromixer for practical applications

PubMed Central

Du, Yan; Zhang, Zhiyi; Yim, ChaeHo; Lin, Min; Cao, Xudong

2010-01-01

We demonstrated a simple method for the device design of a staggered herringbone micromixer (SHM) using numerical simulation. By correlating the simulated concentrations with channel length, we obtained a series of concentration versus channel length profiles, and used mixing completion length Lm as the only parameter to evaluate the performance of device structure on mixing. Fluorescence quenching experiments were subsequently conducted to verify the optimized SHM structure for a specific application. Good agreement was found between the optimization and the experimental data. Since Lm is straightforward, easily defined and calculated parameter for characterization of mixing performance, this method for designing micromixers is simple and effective for practical applications. PMID:20697584

A simplified design of the staggered herringbone micromixer for practical applications.

PubMed

Du, Yan; Zhang, Zhiyi; Yim, Chaeho; Lin, Min; Cao, Xudong

2010-05-07

We demonstrated a simple method for the device design of a staggered herringbone micromixer (SHM) using numerical simulation. By correlating the simulated concentrations with channel length, we obtained a series of concentration versus channel length profiles, and used mixing completion length L(m) as the only parameter to evaluate the performance of device structure on mixing. Fluorescence quenching experiments were subsequently conducted to verify the optimized SHM structure for a specific application. Good agreement was found between the optimization and the experimental data. Since L(m) is straightforward, easily defined and calculated parameter for characterization of mixing performance, this method for designing micromixers is simple and effective for practical applications.

A Module Experimental Process System Development Unit (MEPSDU)

NASA Technical Reports Server (NTRS)

1981-01-01

Subsequent to the design review, a series of tests was conducted on simulated modules to demonstrate that all environmental specifications (wind loading, hailstone impact, thermal cycling, and humidity cycling) are satisfied by the design. All tests, except hailstone impact, were successfully completed. The assembly sequence was simplified by virtue of eliminating the frame components and assembly steps. Performance was improved by reducing the module edge border required to accommodate the frame of the preliminary design module. An ultrasonic rolling spot bonding technique was selected for use in the machine to perform the aluminum interconnect to cell metallization electrical joints required in the MEPSDU module configuration. This selection was based on extensive experimental tests and economic analyses.

Statistical analysis and application of quasi experiments to antimicrobial resistance intervention studies.

PubMed

Shardell, Michelle; Harris, Anthony D; El-Kamary, Samer S; Furuno, Jon P; Miller, Ram R; Perencevich, Eli N

2007-10-01

Quasi-experimental study designs are frequently used to assess interventions that aim to limit the emergence of antimicrobial-resistant pathogens. However, previous studies using these designs have often used suboptimal statistical methods, which may result in researchers making spurious conclusions. Methods used to analyze quasi-experimental data include 2-group tests, regression analysis, and time-series analysis, and they all have specific assumptions, data requirements, strengths, and limitations. An example of a hospital-based intervention to reduce methicillin-resistant Staphylococcus aureus infection rates and reduce overall length of stay is used to explore these methods.

Development of an integrated, zero-G pneumatic transporter/rotating-paddle incinerator/catalytic afterburner subsystem for processing human waste on board spacecraft

NASA Technical Reports Server (NTRS)

Fields, S. F.; Labak, L. J.; Honegger, R. J.

1974-01-01

A baseline laboratory prototype of an integrated, six man, zero-g subsystem for processing human wastes onboard spacecraft was investigated, and included the development of an operational specification for the baseline subsystem, followed by design and fabrication. The program was concluded by performing a series of six tests over a period of two weeks to evaluate the performance of the subsystem. The results of the tests were satisfactory, however, several changes in the design of the subsystem are required before completely satisfactory performance can be achieved.

Instrument for Measuring Thermal Conductivity of Materials at Low Temperatures

NASA Technical Reports Server (NTRS)

Fesmire, James; Sass, Jared; Johnson, Wesley

2010-01-01

With the advance of polymer and other non-metallic material sciences, whole new series of polymeric materials and composites are being created. These materials are being optimized for many different applications including cryogenic and low-temperature industrial processes. Engineers need these data to perform detailed system designs and enable new design possibilities for improved control, reliability, and efficiency in specific applications. One main area of interest is cryogenic structural elements and fluid handling components and other parts, films, and coatings for low-temperature application. An important thermal property of these new materials is the apparent thermal conductivity (k-value).

Large Field Visualization with Demand-Driven Calculation

NASA Technical Reports Server (NTRS)

Moran, Patrick J.; Henze, Chris

1999-01-01

We present a system designed for the interactive definition and visualization of fields derived from large data sets: the Demand-Driven Visualizer (DDV). The system allows the user to write arbitrary expressions to define new fields, and then apply a variety of visualization techniques to the result. Expressions can include differential operators and numerous other built-in functions, ail of which are evaluated at specific field locations completely on demand. The payoff of following a demand-driven design philosophy throughout becomes particularly evident when working with large time-series data, where the costs of eager evaluation alternatives can be prohibitive.

The Design and Synthesis of Epoxy Matrix Composites Curable by Electron Beam Induced Cationic Polymerization

NASA Technical Reports Server (NTRS)

Crivello, James V.

2000-01-01

Several new series of novel, high reactivity epoxy resins are described which are designed specifically for the fabrication of high performance carbon fiber reinforced composites for commercial aircraft structural applications using cationic UV and e-beam curing. The objective of this investigation is to provide resin matrices which rapidly and efficiently cure under low e-beam doses which are suitable to high speed automated composite fabrication techniques such as automated tape and tow placement. It was further the objective of this work to provide resins with superior thermal, oxidative and atomic oxygen resistance.

Chemistry: A Vietnamese Supplement. A High-School Bilingual Handbook for the Vietnamese Student. Indochinese High-School Supplement.

ERIC Educational Resources Information Center

Tuan, Do Dinh; And Others

This text is the first of a series of six bilingual handbooks especially designed for the Indochinese student in American high schools. Five of the supplements are in Vietnamese and each deals with a specific subject-area: chemisty, physics, biology, mathematics or U.S. history. The sixth book is in Khmer and is a supplement for U.S. history. The…

Synthesis and evaluation of 3-amino/guanidine substituted phenyl oxazoles as a novel class of LSD1 inhibitors with anti-proliferative properties.

PubMed

Dulla, Balakrishna; Kirla, Krishna Tulasi; Rathore, Vandana; Deora, Girdhar Singh; Kavela, Sridhar; Maddika, Subbareddy; Chatti, Kiranam; Reiser, Oliver; Iqbal, Javed; Pal, Manojit

2013-05-21

A series of functionalized phenyl oxazole derivatives was designed, synthesized and screened in vitro for their activities against LSD1 and for effects on viability of cervical and breast cancer cells, and in vivo for effects using zebrafish embryos. These compounds are likely to act via multiple epigenetic mechanisms specific to cancer cells including LSD1 inhibition.

Content Aggregations for Reading Skills and Mathematics for the Comparative Study of Phase IV of the IGE Evaluation Project. Phase IV, Project Paper 80-3.

ERIC Educational Resources Information Center

Nerenz, Anne G.; Webb, Norman L.

This is one of a series of reports which provide definitions of and descriptive data on the variables used in the Comparative Study of Phase IV of the Individually Guided Education (IEG) Evaluation Project. Phase IV investigated three curriculum programs specifically designed to be compatible with instructional programming for the individual…

THE USE OF CHEMICALS IN THE FIELD OF FARM ANIMAL HEALTH (NUTRITION, ENTOMOLOGY, PATHOLOGY). AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 7.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF STATE STUDIES, THIS MODULE IS ONE OF A SERIES DESIGNED TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS. THE SPECIFIC OBJECTIVE OF THIS MODULE IS TO PREPARE TECHNICIANS IN THE FIELD OF THE USE OF CHEMICALS FOR ANIMAL HEALTH. SECTIONS INCLUDE -- (1)…

Stepping Stones Triple P: The Theoretical Basis and Development of an Evidence-Based Positive Parenting Program for Families with a Child Who Has a Disability

ERIC Educational Resources Information Center

Sanders, Matthew; Mazzucchelli, Trevor; Studman, Lisa

2004-01-01

Stepping Stones Triple P is the first in a series of programs based on the Triple P--Positive Parenting Program that has been specifically designed for families who have a child with a disability. This paper presents the rationale, theoretical foundations, historical development and distinguishing features of the program. The multi-level…

GEOSAT Follow-On (GFO) Altimeter Document Series. Volume 5; Version 1; GFO Radar Altimeter Processing at Wallops Flight Facility

NASA Technical Reports Server (NTRS)

Lockwood, Dennis W.; Conger, A. M.

2003-01-01

This document is a compendium of the WFF GFO Software Development Team's knowledge regarding of GDO CAL/VAL Data. It includes many elements of a requirements document, a software specification document, a software design document, and a user's guide. In the more technical sections, this document assumes the reader is familiar with GFO and its CAL/VAL Data.

Endogenous Biologically Inspired Art of Complex Systems.

PubMed

Ji, Haru; Wakefield, Graham

2016-01-01

Since 2007, Graham Wakefield and Haru Ji have looked to nature for inspiration as they have created a series of "artificial natures," or interactive visualizations of biologically inspired complex systems that can evoke nature-like aesthetic experiences within mixed-reality art installations. This article describes how they have applied visualization, sonification, and interaction design in their work with artificial ecosystems and organisms using specific examples from their exhibited installations.

Soil Conservation Techniques for Hillside Farms. A Guide for Peace Corps Volunteers. Appropriate Technologies for Development. Peace Corps Information Collection & Exchange Reprint Series No. R-62.

ERIC Educational Resources Information Center

Crozier, Carl

This guide provides agricultural extensionists with basic information that will help them design plans for the conservation of soils and the management of water runoff in specific agricultural plots. It is based on experiences with small hillside farms in Honduras and takes into account the resources and constraints commonly encountered there.…

Beyond a series of security nets: Applying STAMP & STPA to port security

DOE PAGES

Williams, Adam D.

2015-11-17

Port security is an increasing concern considering the significant role of ports in global commerce and today’s increasingly complex threat environment. Current approaches to port security mirror traditional models of accident causality -- ‘a series of security nets’ based on component reliability and probabilistic assumptions. Traditional port security frameworks result in isolated and inconsistent improvement strategies. Recent work in engineered safety combines the ideas of hierarchy, emergence, control and communication into a new paradigm for understanding port security as an emergent complex system property. The ‘System-Theoretic Accident Model and Process (STAMP)’ is a new model of causality based on systemsmore » and control theory. The associated analysis process -- System Theoretic Process Analysis (STPA) -- identifies specific technical or procedural security requirements designed to work in coordination with (and be traceable to) overall port objectives. This process yields port security design specifications that can mitigate (if not eliminate) port security vulnerabilities related to an emphasis on component reliability, lack of coordination between port security stakeholders or economic pressures endemic in the maritime industry. As a result, this article aims to demonstrate how STAMP’s broader view of causality and complexity can better address the dynamic and interactive behaviors of social, organizational and technical components of port security.« less

Beyond a series of security nets: Applying STAMP & STPA to port security

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Adam D.

Port security is an increasing concern considering the significant role of ports in global commerce and today’s increasingly complex threat environment. Current approaches to port security mirror traditional models of accident causality -- ‘a series of security nets’ based on component reliability and probabilistic assumptions. Traditional port security frameworks result in isolated and inconsistent improvement strategies. Recent work in engineered safety combines the ideas of hierarchy, emergence, control and communication into a new paradigm for understanding port security as an emergent complex system property. The ‘System-Theoretic Accident Model and Process (STAMP)’ is a new model of causality based on systemsmore » and control theory. The associated analysis process -- System Theoretic Process Analysis (STPA) -- identifies specific technical or procedural security requirements designed to work in coordination with (and be traceable to) overall port objectives. This process yields port security design specifications that can mitigate (if not eliminate) port security vulnerabilities related to an emphasis on component reliability, lack of coordination between port security stakeholders or economic pressures endemic in the maritime industry. As a result, this article aims to demonstrate how STAMP’s broader view of causality and complexity can better address the dynamic and interactive behaviors of social, organizational and technical components of port security.« less

Usability engineering for augmented reality: employing user-based studies to inform design.

PubMed

Gabbard, Joseph L; Swan, J Edward

2008-01-01

A major challenge, and thus opportunity, in the field of human-computer interaction and specifically usability engineering is designing effective user interfaces for emerging technologies that have no established design guidelines or interaction metaphors or introduce completely new ways for users to perceive and interact with technology and the world around them. Clearly, augmented reality is one such emerging technology. We propose a usability engineering approach that employs user-based studies to inform design, by iteratively inserting a series of user-based studies into a traditional usability engineering lifecycle to better inform initial user interface designs. We present an exemplar user-based study conducted to gain insight into how users perceive text in outdoor augmented reality settings and to derive implications for design in outdoor augmented reality. We also describe lessons learned from our experiences conducting user-based studies as part of the design process.

Mesoscopic Community Structure of Financial Markets Revealed by Price and Sign Fluctuations

PubMed Central

Almog, Assaf; Besamusca, Ferry; MacMahon, Mel; Garlaschelli, Diego

2015-01-01

The mesoscopic organization of complex systems, from financial markets to the brain, is an intermediate between the microscopic dynamics of individual units (stocks or neurons, in the mentioned cases), and the macroscopic dynamics of the system as a whole. The organization is determined by “communities” of units whose dynamics, represented by time series of activity, is more strongly correlated internally than with the rest of the system. Recent studies have shown that the binary projections of various financial and neural time series exhibit nontrivial dynamical features that resemble those of the original data. This implies that a significant piece of information is encoded into the binary projection (i.e. the sign) of such increments. Here, we explore whether the binary signatures of multiple time series can replicate the same complex community organization of the financial market, as the original weighted time series. We adopt a method that has been specifically designed to detect communities from cross-correlation matrices of time series data. Our analysis shows that the simpler binary representation leads to a community structure that is almost identical with that obtained using the full weighted representation. These results confirm that binary projections of financial time series contain significant structural information. PMID:26226226

The physiology analysis system: an integrated approach for warehousing, management and analysis of time-series physiology data.

PubMed

McKenna, Thomas M; Bawa, Gagandeep; Kumar, Kamal; Reifman, Jaques

2007-04-01

The physiology analysis system (PAS) was developed as a resource to support the efficient warehousing, management, and analysis of physiology data, particularly, continuous time-series data that may be extensive, of variable quality, and distributed across many files. The PAS incorporates time-series data collected by many types of data-acquisition devices, and it is designed to free users from data management burdens. This Web-based system allows both discrete (attribute) and time-series (ordered) data to be manipulated, visualized, and analyzed via a client's Web browser. All processes occur on a server, so that the client does not have to download data or any application programs, and the PAS is independent of the client's computer operating system. The PAS contains a library of functions, written in different computer languages that the client can add to and use to perform specific data operations. Functions from the library are sequentially inserted into a function chain-based logical structure to construct sophisticated data operators from simple function building blocks, affording ad hoc query and analysis of time-series data. These features support advanced mining of physiology data.

Development and Evaluation of Titanium Spacesuit Bearings

NASA Technical Reports Server (NTRS)

Rhodes, Richard; Battisti, Brian; Ytuarte, Raymond, Jr.; Schultz, Bradley

2016-01-01

The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z-series of spacesuits, designed with the intent of meeting a wide variety of exploration mission objectives, including human exploration of the Martian surface. Incorporating titanium bearings into the Z-series space suit architecture allows us to reduce mass by an estimated 23 lbs per suit system compared to the previously used stainless steel bearing race designs, without compromising suit functionality. There are two obstacles to overcome when using titanium for a bearing race- 1) titanium is flammable when exposed to the oxygen wetted environment inside the space suit and 2) titanium's poor wear properties are often challenging to overcome in tribology applications. In order to evaluate the ignitability of a titanium space suit bearing, a series of tests were conducted at White Sands Test Facility (WSTF) that introduced the bearings to an extreme test profile, with multiple failures imbedded into the test bearings. The testing showed no signs of ignition in the most extreme test cases; however, substantial wear of the bearing races was observed. In order to design a bearing that can last an entire exploration mission (approx. 3 years), design parameters for maximum contact stress need to be identified. To identify these design parameters, bearing test rigs were developed that allow for the quick evaluation of various bearing ball loads, ball diameters, lubricants, and surface treatments. This test data will allow designers to minimize the titanium bearing mass for a specific material and lubricant combination and design around a cycle life requirement for an exploration mission. This paper reviews the current research and testing that has been performed on titanium bearing races to evaluate the use of such materials in an enriched oxygen environment and to optimize the bearing assembly mass and tribological properties to accommodate for the high bearing cycle life for an exploration mission.

Space Suit Portable Life Support System (PLSS) 2.0 Pre-Installation Acceptance (PIA) Testing

NASA Technical Reports Server (NTRS)

Watts, Carly; Vogel, Matthew

2016-01-01

Following successful completion of the space suit Portable Life Support System (PLSS) 1.0 development and testing in 2011, the second system-level prototype, PLSS 2.0, was developed in 2012 to continue the maturation of the advanced PLSS design which is intended to reduce consumables, improve reliability and robustness, and incorporate additional sensing and functional capabilities over the current Space Shuttle/International Space Station Extravehicular Mobility Unit (EMU) PLSS. PLSS 2.0 represents the first attempt at a packaged design comprising first generation or later component prototypes and medium fidelity interfaces within a flight-like representative volume. Pre-Installation Acceptance (PIA) is carryover terminology from the Space Shuttle Program referring to the series of test sequences used to verify functionality of the EMU PLSS prior to installation into the Space Shuttle airlock for launch. As applied to the PLSS 2.0 development and testing effort, PIA testing designated the series of 27 independent test sequences devised to verify component and subsystem functionality, perform in situ instrument calibrations, generate mapping data to define set-points for control algorithms, evaluate hardware performance against advanced PLSS design requirements, and provide quantitative and qualitative feedback on evolving design requirements and performance specifications. PLSS 2.0 PIA testing was carried out from 3/20/13 - 3/15/14 using a variety of test configurations to perform test sequences that ranged from stand-alone component testing to system-level testing, with evaluations becoming increasingly integrated as the test series progressed. Each of the 27 test sequences was vetted independently, with verification of basic functionality required before completion. Because PLSS 2.0 design requirements were evolving concurrently with PLSS 2.0 PIA testing, the requirements were used as guidelines to assess performance during the tests; after the completion of PIA testing, test data served to improve the fidelity and maturity of design requirements as well as plans for future advanced PLSS functional testing.

Space Suit Portable Life Support System (PLSS) 2.0 Pre-Installation Acceptance (PIA) Testing

NASA Technical Reports Server (NTRS)

Anchondo, Ian; Cox, Marlon; Meginnis, Carly; Westheimer, David; Vogel, Matt R.

2016-01-01

Following successful completion of the space suit Portable Life Support System (PLSS) 1.0 development and testing in 2011, the second system-level prototype, PLSS 2.0, was developed in 2012 to continue the maturation of the advanced PLSS design. This advanced PLSS is intended to reduce consumables, improve reliability and robustness, and incorporate additional sensing and functional capabilities over the current Space Shuttle/International Space Station Extravehicular Mobility Unit (EMU) PLSS. PLSS 2.0 represents the first attempt at a packaged design comprising first generation or later component prototypes and medium fidelity interfaces within a flight-like representative volume. Pre-Installation Acceptance (PIA) is carryover terminology from the Space Shuttle Program referring to the series of test sequences used to verify functionality of the EMU PLSS prior to installation into the Space Shuttle airlock for launch. As applied to the PLSS 2.0 development and testing effort, PIA testing designated the series of 27 independent test sequences devised to verify component and subsystem functionality, perform in situ instrument calibrations, generate mapping data, define set-points, evaluate control algorithms, evaluate hardware performance against advanced PLSS design requirements, and provide quantitative and qualitative feedback on evolving design requirements and performance specifications. PLSS 2.0 PIA testing was carried out in 2013 and 2014 using a variety of test configurations to perform test sequences that ranged from stand-alone component testing to system-level testing, with evaluations becoming increasingly integrated as the test series progressed. Each of the 27 test sequences was vetted independently, with verification of basic functionality required before completion. Because PLSS 2.0 design requirements were evolving concurrently with PLSS 2.0 PIA testing, the requirements were used as guidelines to assess performance during the tests; after the completion of PIA testing, test data served to improve the fidelity and maturity of design requirements as well as plans for future advanced PLSS functional testing.

78 FR 19468 - Applications for New Awards; Minority Science and Engineering Improvement Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-01

... new immigrants, who are migrant, or who have disabilities. Interrupted time series design means a type... time series design that relies on the comparison of treatment effects on a single subject or group of... defined in this notice), interrupted time series designs (as defined in this notice), or regression...

What Time-Series Designs May Have to Offer Educational Researchers.

ERIC Educational Resources Information Center

Kratochwill, Thomas R.; Levin, Joel R.

1978-01-01

The promise of time-series designs for educational research and evaluation is reviewed. Ten time-series designs are presented and discussed in the context of threats to internal and external validity. The advantages and disadvantages of various visual and statistical data-analysis techniques are presented. A bibliography is appended. (Author/RD)

TimesVector: a vectorized clustering approach to the analysis of time series transcriptome data from multiple phenotypes.

PubMed

Jung, Inuk; Jo, Kyuri; Kang, Hyejin; Ahn, Hongryul; Yu, Youngjae; Kim, Sun

2017-12-01

Identifying biologically meaningful gene expression patterns from time series gene expression data is important to understand the underlying biological mechanisms. To identify significantly perturbed gene sets between different phenotypes, analysis of time series transcriptome data requires consideration of time and sample dimensions. Thus, the analysis of such time series data seeks to search gene sets that exhibit similar or different expression patterns between two or more sample conditions, constituting the three-dimensional data, i.e. gene-time-condition. Computational complexity for analyzing such data is very high, compared to the already difficult NP-hard two dimensional biclustering algorithms. Because of this challenge, traditional time series clustering algorithms are designed to capture co-expressed genes with similar expression pattern in two sample conditions. We present a triclustering algorithm, TimesVector, specifically designed for clustering three-dimensional time series data to capture distinctively similar or different gene expression patterns between two or more sample conditions. TimesVector identifies clusters with distinctive expression patterns in three steps: (i) dimension reduction and clustering of time-condition concatenated vectors, (ii) post-processing clusters for detecting similar and distinct expression patterns and (iii) rescuing genes from unclassified clusters. Using four sets of time series gene expression data, generated by both microarray and high throughput sequencing platforms, we demonstrated that TimesVector successfully detected biologically meaningful clusters of high quality. TimesVector improved the clustering quality compared to existing triclustering tools and only TimesVector detected clusters with differential expression patterns across conditions successfully. The TimesVector software is available at http://biohealth.snu.ac.kr/software/TimesVector/. sunkim.bioinfo@snu.ac.kr. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Preliminary experience in transoral laryngeal surgery with a flexible robotic system for benign lesions of the vocal folds.

PubMed

Remacle, Marc; Prasad, Vyas M N

2018-03-01

This purpose of this case series is to present the first four cases utilizing micro-phonosurgical instrumentation designed specifically for use with a semi-flexible 'robotic' system-the Medrobotics Flex system and to evaluate the accessibility and feasibility of this platform in the context of transoral robotic surgery (TORS) for laryngeal surgery. Four patients (3 female, 1 male; age range 49-79 years) were operated by the senior author at CHL-a tertiary hospital centre between 2016 and 2017. The 'robot' was deployed in all cases to assess its accessibility and ability to perform surgery in the larynx. All four patients were successfully treated using the system along with newly developed instrumentation specifically focused on phonosurgery. This series has demonstrated accessibility and ability for laryngeal surgery using a novel semi-rigid operator-controlled 'robotic' system. We encountered no device failures and were able to perform all the selected cases uneventfully.

Manipulating Environmental Time Series in Python/Numpy: the Scikits.Timeseries Package and its Applications.

NASA Astrophysics Data System (ADS)

Gerard-Marchant, P. G.

2008-12-01

Numpy is a free, open source C/Python interface designed for the fast and convenient manipulation of multidimensional numerical arrays. The base object, ndarray, can also be easily be extended to define new objects meeting specific needs. Thanks to its simplicity, efficiency and modularity, numpy and its companion library Scipy have become increasingly popular in the scientific community over the last few years, with application ranging from astronomy and engineering to finances and statistics. Its capacity to handle missing values is particularly appealing when analyzing environmental time series, where irregular data sampling might be an issue. After reviewing the main characteristics of numpy objects and the mechanism of subclassing, we will present the scikits.timeseries package, developed to manipulate single- and multi-variable arrays indexed in time. We will illustrate some typical applications of this package by introducing climpy, a set of extensions designed to help analyzing the impacts of climate variability on environmental data such as precipitations or streamflows.

Rational Design of a New Class of Toll-Like Receptor 4 (TLR4) Tryptamine Related Agonists by Means of the Structure- and Ligand-Based Virtual Screening for Vaccine Adjuvant Discovery.

PubMed

Honegr, Jan; Dolezal, Rafael; Malinak, David; Benkova, Marketa; Soukup, Ondrej; Almeida, Joyce S F D de; Franca, Tanos C C; Kuca, Kamil; Prymula, Roman

2018-01-04

In order to identify novel lead structures for human toll-like receptor 4 ( h TLR4) modulation virtual high throughput screening by a peta-flops-scale supercomputer has been performed. Based on the in silico studies, a series of 12 compounds related to tryptamine was rationally designed to retain suitable molecular geometry for interaction with the h TLR4 binding site as well as to satisfy general principles of drug-likeness. The proposed compounds were synthesized, and tested by in vitro and ex vivo experiments, which revealed that several of them are capable to stimulate h TLR4 in vitro up to 25% activity of Monophosphoryl lipid A. The specific affinity of the in vitro most potent substance was confirmed by surface plasmon resonance direct-binding experiments. Moreover, two compounds from the series show also significant ability to elicit production of interleukin 6.

The GOME-2 instrument on the Metop series of satellites: instrument design, calibration, and level 1 data processing - an overview

NASA Astrophysics Data System (ADS)

Munro, Rosemary; Lang, Rüdiger; Klaes, Dieter; Poli, Gabriele; Retscher, Christian; Lindstrot, Rasmus; Huckle, Roger; Lacan, Antoine; Grzegorski, Michael; Holdak, Andriy; Kokhanovsky, Alexander; Livschitz, Jakob; Eisinger, Michael

2016-03-01

The Global Ozone Monitoring Experiment-2 (GOME-2) flies on the Metop series of satellites, the space component of the EUMETSAT Polar System. In this paper we will provide an overview of the instrument design, the on-ground calibration and characterization activities, in-flight calibration, and level 0 to 1 data processing. The current status of the level 1 data is presented and points of specific relevance to users are highlighted. Long-term level 1 data consistency is also discussed and plans for future work are outlined. The information contained in this paper summarizes a large number of technical reports and related documents containing information that is not currently available in the published literature. These reports and documents are however made available on the EUMETSAT web pages and readers requiring more details than can be provided in this overview paper will find appropriate references at relevant points in the text.

The GOME-2 instrument on the Metop series of satellites: instrument design, calibration, and level 1 data processing - an overview

NASA Astrophysics Data System (ADS)

Munro, R.; Lang, R.; Klaes, D.; Poli, G.; Retscher, C.; Lindstrot, R.; Huckle, R.; Lacan, A.; Grzegorski, M.; Holdak, A.; Kokhanovsky, A.; Livschitz, J.; Eisinger, M.

2015-08-01

The Global Ozone Monitoring Experiment-2 (GOME-2) flies on the Metop series of satellites, the space component of the EUMETSAT Polar System. In this paper we will provide an overview of the instrument design, the on-ground calibration and characterisation activities, in-flight calibration, and level 0 to 1 data processing. The quality of the level 1 data is presented and points of specific relevance to users are highlighted. Long-term level 1 data consistency is also discussed and plans for future work are outlined. The information contained in this paper summarises a large number of technical reports and related documents containing information that is not currently available in the published literature. These reports and documents are however made available on the EUMETSAT web pages (http://www.eumetsat.int) and readers requiring more details than can be provided in this overview paper will find appropriate references at relevant points in the text.

A general approach for developing system-specific functions to score protein-ligand docked complexes using support vector inductive logic programming.

PubMed

Amini, Ata; Shrimpton, Paul J; Muggleton, Stephen H; Sternberg, Michael J E

2007-12-01

Despite the increased recent use of protein-ligand and protein-protein docking in the drug discovery process due to the increases in computational power, the difficulty of accurately ranking the binding affinities of a series of ligands or a series of proteins docked to a protein receptor remains largely unsolved. This problem is of major concern in lead optimization procedures and has lead to the development of scoring functions tailored to rank the binding affinities of a series of ligands to a specific system. However, such methods can take a long time to develop and their transferability to other systems remains open to question. Here we demonstrate that given a suitable amount of background information a new approach using support vector inductive logic programming (SVILP) can be used to produce system-specific scoring functions. Inductive logic programming (ILP) learns logic-based rules for a given dataset that can be used to describe properties of each member of the set in a qualitative manner. By combining ILP with support vector machine regression, a quantitative set of rules can be obtained. SVILP has previously been used in a biological context to examine datasets containing a series of singular molecular structures and properties. Here we describe the use of SVILP to produce binding affinity predictions of a series of ligands to a particular protein. We also for the first time examine the applicability of SVILP techniques to datasets consisting of protein-ligand complexes. Our results show that SVILP performs comparably with other state-of-the-art methods on five protein-ligand systems as judged by similar cross-validated squares of their correlation coefficients. A McNemar test comparing SVILP to CoMFA and CoMSIA across the five systems indicates our method to be significantly better on one occasion. The ability to graphically display and understand the SVILP-produced rules is demonstrated and this feature of ILP can be used to derive hypothesis for future ligand design in lead optimization procedures. The approach can readily be extended to evaluate the binding affinities of a series of protein-protein complexes. (c) 2007 Wiley-Liss, Inc.

A model of urban rational growth based on grey prediction

NASA Astrophysics Data System (ADS)

Xiao, Wenjing

2017-04-01

Smart growth focuses on building sustainable cities, using compact development to prevent urban sprawl. This paper establishes a series of models to implement smart growth theories into city design. Besides two specific city design cases are shown. Firstly, We establishes Smart Growth Measure Model to measure the success of smart growth of a city. And we use Full Permutation Polygon Synthetic Indicator Method to calculate the Comprehensive Indicator (CI) which is used to measure the success of smart growth. Secondly, this paper uses the principle of smart growth to develop a new growth plan for two cities. We establish an optimization model to maximum CI value. The Particle Swarm Optimization (PSO) algorithm is used to solve the model. Combined with the calculation results and the specific circumstances of cities, we make their the smart growth plan respectively.

Time-series analysis of the transcriptome and proteome of Escherichia coli upon glucose repression.

PubMed

Borirak, Orawan; Rolfe, Matthew D; de Koning, Leo J; Hoefsloot, Huub C J; Bekker, Martijn; Dekker, Henk L; Roseboom, Winfried; Green, Jeffrey; de Koster, Chris G; Hellingwerf, Klaas J

2015-10-01

Time-series transcript- and protein-profiles were measured upon initiation of carbon catabolite repression in Escherichia coli, in order to investigate the extent of post-transcriptional control in this prototypical response. A glucose-limited chemostat culture was used as the CCR-free reference condition. Stopping the pump and simultaneously adding a pulse of glucose, that saturated the cells for at least 1h, was used to initiate the glucose response. Samples were collected and subjected to quantitative time-series analysis of both the transcriptome (using microarray analysis) and the proteome (through a combination of 15N-metabolic labeling and mass spectrometry). Changes in the transcriptome and corresponding proteome were analyzed using statistical procedures designed specifically for time-series data. By comparison of the two sets of data, a total of 96 genes were identified that are post-transcriptionally regulated. This gene list provides candidates for future in-depth investigation of the molecular mechanisms involved in post-transcriptional regulation during carbon catabolite repression in E. coli, like the involvement of small RNAs. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

Human-Centered Design of Human-Computer-Human Dialogs in Aerospace Systems

NASA Technical Reports Server (NTRS)

Mitchell, Christine M.

1998-01-01

A series of ongoing research programs at Georgia Tech established a need for a simulation support tool for aircraft computer-based aids. This led to the design and development of the Georgia Tech Electronic Flight Instrument Research Tool (GT-EFIRT). GT-EFIRT is a part-task flight simulator specifically designed to study aircraft display design and single pilot interaction. ne simulator, using commercially available graphics and Unix workstations, replicates to a high level of fidelity the Electronic Flight Instrument Systems (EFIS), Flight Management Computer (FMC) and Auto Flight Director System (AFDS) of the Boeing 757/767 aircraft. The simulator can be configured to present information using conventional looking B757n67 displays or next generation Primary Flight Displays (PFD) such as found on the Beech Starship and MD-11.

78 FR 76248 - Special Conditions: Airbus, Model A350-900 Series Airplane; Side Stick Controller

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... control columns and wheels. This kind of controller is designed for only one-hand operation. The... same subject: For the Airbus Model A350-900 series airplane equipped with stick controls designed for... Airbus Model A350-900 series airplanes. These airplanes will have a novel or unusual design feature...

Nucleic Acid Nanostructures: Bottom-Up Control of Geometry on the Nanoscale

PubMed Central

Seeman, Nadrian C.; Lukeman, Philip S.

2012-01-01

DNA may seem an unlikely molecule from which to build nanostructures, but this is not correct. The specificity of interaction that enables DNA to function so successfully as genetic material also enables its use as a smart molecule for construction on the nanoscale. The key to using DNA for this purpose is the design of stable branched molecules, which expand its ability to interact specifically with other nucleic acid molecules. The same interactions used by genetic engineers can be used to make cohesive interactions with other DNA molecules that lead to a variety of new species. Branched DNA molecules are easy to design, and the can assume a variety of structural motifs. These can be used for purposes both of specific construction, such as polyhedra, and for the assembly of topological targets. A variety of two-dimensional periodic arrays with specific patterns have been made. DNA nanomechanical devices have been built with a series of different triggers, small molecules, nucleic acid molecules and proteins. Recently, progress has been made in self-replication of DNA nano-constructs, and in the scaffolding of other species into DNA arrangements. PMID:25152542

Design of dual multiple aperture devices for dynamical fluence field modulated CT.

PubMed

Mathews, Aswin John; Tilley, Steven; Gang, Grace; Kawamoto, Satomi; Zbijewski, Wojciech; Siewerdsen, Jeffrey H; Levinson, Reuven; Webster Stayman, J

2016-07-01

A Multiple Aperture Device (MAD) is a novel x-ray beam modulator that uses binary filtration on a fine scale to spatially modulate an x-ray beam. Using two MADs in series enables a large variety of fluence profiles by shifting the MADS relative to each other. This work details the design and control of dual MADs for a specific class of desired fluence patterns. Specifically, models of MAD operation are integrated into a best fit objective followed by CMA-ES optimization. To illustrate this framework we demonstrate the design process for an abdominal phantom with the goal of uniform detected signal. Achievable fluence profiles show good agreement with target fluence profiles, and the ability to flatten projections when a phantom is scanned is demonstrated. Simulated data reconstruction using traditional tube current modulation (TCM) and MAD filtering with TCM are investigated with the dual MAD system demonstrating more uniformity in noise and illustrating the potential for dose reduction under a maximum noise level constraint.

Lower Methow tributaries intensive effectiveness monitoring study. Interim report

USGS Publications Warehouse

Martens, Kyle D.; Connolly, Patrick J.

2008-01-01

Actions have been taken to replace diversion dams in lower Beaver Creek with a series of rock vortex weirs. Some of these diversion dams have been in place for over 100 years, and they have impaired or completely blocked upstream migration of fish. Three diversion dams were replaced in 2003 (Lower Stokes, Thurlow Transfer, and Upper Stokes), and a forth diversion dam was replaced in 2004 (Fort-Thurlow). These vortex weirs were designed and installed under the supervision of U.S. Bureau of Reclamation (BOR) engineers and completed in accordance to National Marine Fisheries Service (NMFS) and Washington Department of Fisheries and Wildlife (WDFW) fish passage criteria. The projects were designed to meet fish species recovery needs described by the Endangered Species Act (ESA) and the “BiOp” issued by NMFS (2000a). Since no specific guidelines have been identified to date specifically addressing diversion dams, WDFW and NMFS guidelines are being considered as the target design and performance criteria for the sites monitored as part of this project. Where used, the vortex weirs were designed to maintain irrigation diversion capabilities while improving fish passage.

Ensuring the Quality of Evidence: Using the Best Design to Answer Health IT Questions.

PubMed

Weir, Charlene R

2016-01-01

The quality of logic in a research design determines the value of the results and our confidence regarding the validity of the findings. The purpose of this contribution is to review the principles of research design as they apply to research and evaluation in health IT. We review the architecture of research design, the definitions of cause, sources of bias and confounds, and the importance of measurement as related to the various types of health IT questions. The goal is to provide practitioners a roadmap for making decisions for their own specific study. The contribution is organized around the Threats to Validity taxonomy and explains how different design models address these threats through the use of blocking, factorial design, control groups and time series analysis. The contribution discusses randomized experiments, and includes regression discontinuity designs and various quasi-experimental designs with a special emphasis on how to improve pre/post designs. At the end, general recommendations are provided for improving weaker designs and general research procedures.

New Zealand's post-2008 health system reforms: toward re-centralization of organizational arrangements.

PubMed

Gauld, Robin

2012-07-01

The election of a centre-right government in 2008 has spawned a series of ongoing reforms to the structures for governing New Zealand's health system. These mainly involve creation of a series of new national agencies designed to stimulate national coordination and centralization of some planning and service delivery functions along with performance improvements in specific areas, namely quality, information technology, service efficiency, reduction of administrative costs, and comparative-effectiveness research. This brief article provides an overview of the post-2008 reforms. It notes that, while there appears to be agreement within the health system that the reforms are moving in the right direction, the new institutional arrangements are perhaps overly complicated. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Male unemployment and cause-specific mortality in postwar Scotland.

PubMed

Forbes, J F; McGregor, A

1987-01-01

This article reports a time-series analysis of male unemployment and mortality in postwar Scotland. The results provide little evidence to support the hypothesis that unemployment exerts a significant and consistent positive impact on mortality from all causes, lung cancer, ischemic heart disease, and cerebrovascular disease. Although significant positive associations between unemployment and mortality from lung cancer and ischemic heart disease were detected for older males in the short term, the long-term association between unemployment and mortality tends to be negative. Further progress on establishing possible causal relationships between unemployment and health requires both the collaboration of medical and social scientists and a well designed prospective study that avoids many of the problems associated with time-series and cross-sectional analyses.

Future projects in asteroseismology: the unique role of Antarctica

NASA Astrophysics Data System (ADS)

Mosser, B.; Siamois Team

Asteroseismology requires observables registered in stringent conditions: very high sensitivity, uninterrupted time series, long duration. These specifications then allow to study the details of the stellar interior structure. Space-borne and ground-based asteroseismic projects are presented and compared. With CoRoT as a precursor, then Kepler and maybe Plato, the roadmap in space appears to be precisely designed. In parallel, ground-based projects are necessary to provide different and unique information on bright stars with Doppler measurements. Dome C appears to be the ideal place for ground-based asteroseismic observations. The unequalled weather conditions yield a duty cycle comparable to space. Long time series (up to 3 months) will be possible, thanks to the long duration of the polar night.

Concept Study on a Flexible Standard Bus for Small Scientific Satellites

NASA Astrophysics Data System (ADS)

Fukuda, Seisuke; Sawai, Shujiro; Sakai, Shin-Ichiro; Saito, Hirobumi; Tohma, Takayuki; Takahashi, Junko; Toriumi, Tsuyoshi; Kitade, Kenji

In this paper, a new standard bus system for a series of small scientific satellites in the Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency (ISAS/JAXA) is described. Since each mission proposed for the series has a wide variety of requirements, a lot of efforts are needed to enhance flexibility of the standard bus. Some concepts from different viewpoints are proposed. First, standardization layers concerning satellite configuration, instruments, interfaces, and design methods are defined respectively. Methods of product platform engineering, which classify specifications of the bus system into a core platform, alternative variants, and selectable variants, are also investigated in order to realize a semi-custom-made bus. Furthermore, a tradeoff between integration and modularization architecture is fully considered.

Electrification Futures Study: End-Use Electric Technology Cost and Performance Projections through 2050

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jadun, Paige; McMillan, Colin; Steinberg, Daniel

This report is the first in a series of Electrification Futures Study (EFS) publications. The EFS is a multiyear research project to explore widespread electrification in the future energy system of the United States. More specifically, the EFS is designed to examine electric technology advancement and adoption for end uses in all major economic sectors as well as electricity consumption growth and load profiles, future power system infrastructure development and operations, and the economic and environmental implications of widespread electrification. Because of the expansive scope and the multiyear duration of the study, research findings and supporting data will be publishedmore » as a series of reports, with each report released on its own timeframe.« less

Inverted Silicon Nanopencil Array Solar Cells with Enhanced Contact Structures.

PubMed

Liang, Xiaoguang; Shu, Lei; Lin, Hao; Fang, Ming; Zhang, Heng; Dong, Guofa; Yip, SenPo; Xiu, Fei; Ho, Johnny C

2016-09-27

Although three-dimensional nanostructured solar cells have attracted extensive research attention due to their superior broadband and omnidirectional light-harvesting properties, majority of them are still suffered from complicated fabrication processes as well as disappointed photovoltaic performances. Here, we employed our newly-developed, low-cost and simple wet anisotropic etching to fabricate hierarchical silicon nanostructured arrays with different solar cell contact design, followed by systematic investigations of their photovoltaic characteristics. Specifically, nano-arrays with the tapered tips (e.g. inverted nanopencils) are found to enable the more conformal top electrode deposition directly onto the nanostructures for better series and shunt conductance, but its insufficient film coverage at the basal plane would still restrict the charge carrier collection. In contrast, the low-platform contact design facilitates a substantial photovoltaic device performance enhancement of ~24%, as compared to the one of conventional top electrode design, due to the shortened current path and improved lateral conductance for the minimized carrier recombination and series resistance. This enhanced contact structure can not only maintain excellent photon-trapping behaviors of nanostructures, but also help to eliminate adverse impacts of these tapered nano-morphological features on the contact resistance, providing further insight into design consideration in optimizing the contact geometry for high-performance nanostructured photovoltaic devices.

Inverted Silicon Nanopencil Array Solar Cells with Enhanced Contact Structures

PubMed Central

Liang, Xiaoguang; Shu, Lei; Lin, Hao; Fang, Ming; Zhang, Heng; Dong, Guofa; Yip, SenPo; Xiu, Fei; Ho, Johnny C.

2016-01-01

Although three-dimensional nanostructured solar cells have attracted extensive research attention due to their superior broadband and omnidirectional light-harvesting properties, majority of them are still suffered from complicated fabrication processes as well as disappointed photovoltaic performances. Here, we employed our newly-developed, low-cost and simple wet anisotropic etching to fabricate hierarchical silicon nanostructured arrays with different solar cell contact design, followed by systematic investigations of their photovoltaic characteristics. Specifically, nano-arrays with the tapered tips (e.g. inverted nanopencils) are found to enable the more conformal top electrode deposition directly onto the nanostructures for better series and shunt conductance, but its insufficient film coverage at the basal plane would still restrict the charge carrier collection. In contrast, the low-platform contact design facilitates a substantial photovoltaic device performance enhancement of ~24%, as compared to the one of conventional top electrode design, due to the shortened current path and improved lateral conductance for the minimized carrier recombination and series resistance. This enhanced contact structure can not only maintain excellent photon-trapping behaviors of nanostructures, but also help to eliminate adverse impacts of these tapered nano-morphological features on the contact resistance, providing further insight into design consideration in optimizing the contact geometry for high-performance nanostructured photovoltaic devices. PMID:27671709

Automated Gun Laying System for Self-Propelled Artillery Weapons.

DTIC Science & Technology

1980-05-30

model designed specifically to the requirements of a test bed system. The system configuration and characteristics were specified through a series of...proposed by the contractor was further defined, utilizing the M109 component information provided by the COTR. Math models were developed to predict system...data. The model used for the TB-I program did not have the capability for a remote reset function, hence it was necessary to instruct the crew (loader

Understanding and Targeting Epigenetic Alterations in Acquired Bone Marrow Failure

DTIC Science & Technology

2016-07-01

should not be construed as an official Department of the Army position, policy or decision unless so designated by other documentation. REPORT...modifiers may specifically impact DNA methylation and/or histone post -translational modifications in a manner that is therapeutically targetable, and (c) if...2016 Tisch Cancer Institute Seminar Series, Icahn School of Medicine at Mount Sinai, New York, NY 2016 11th CML & MPN Post -ASH Workshop, La Jolla

Naval Postgraduate School Research. Volume 8, Number 3, October 1998

DTIC Science & Technology

1998-10-01

the Bangor Submarine Base: “Understanding Racism ” and “Under- standing Sexism .” These two-day workshops are part of a four workshop series on Managing...organization theory and complex- ity theory and shaping them into design guidelines for mapping command and control processes to the needs of specific missions...Intranet- based decision support for the ACE. The methodol- ogy combines systems development life cycle (SDLC) practices, command and control theory , an

Writing to Learn by Learning to Write during the School Science Laboratory: Helping Middle and High School Students Develop Argumentative Writing Skills as They Learn Core Ideas

ERIC Educational Resources Information Center

Sampson, Victor; Enderle, Patrick; Grooms, Jonathon; Witte, Shelbie

2013-01-01

This study examined how students' science-specific argumentative writing skills and understanding of core ideas changed over the course of a school year as they participated in a series of science laboratories designed using the Argument-Driven Inquiry (ADI) instructional model. The ADI model is a student-centered and writing-intensive approach to…

Steric and thermodynamic limits of design for the incorporation of large unnatural amino acids in aminoacyl-tRNA synthetase enzymes.

PubMed

Armen, Roger S; Schiller, Stefan M; Brooks, Charles L

2010-06-01

Orthogonal aminoacyl-tRNA synthetase/tRNA pairs from archaea have been evolved to facilitate site specific in vivo incorporation of unnatural amino acids into proteins in Escherichia coli. Using this approach, unnatural amino acids have been successfully incorporated with high translational efficiency and fidelity. In this study, CHARMM-based molecular docking and free energy calculations were used to evaluate rational design of specific protein-ligand interactions for aminoacyl-tRNA synthetases. A series of novel unnatural amino acid ligands were docked into the p-benzoyl-L-phenylalanine tRNA synthetase, which revealed that the binding pocket of the enzyme does not provide sufficient space for significantly larger ligands. Specific binding site residues were mutated to alanine to create additional space to accommodate larger target ligands, and then mutations were introduced to improve binding free energy. This approach was used to redesign binding sites for several different target ligands, which were then tested against the standard 20 amino acids to verify target specificity. Only the synthetase designed to bind Man-alpha-O-Tyr was predicted to be sufficiently selective for the target ligand and also thermodynamically stable. Our study suggests that extensive redesign of the tRNA synthatase binding pocket for large bulky ligands may be quite thermodynamically unfavorable.

78 FR 64415 - Special Conditions: Airbus, Model A350-900 Series Airplane; Ground Pivoting Loads

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-29

... series because of a novel or unusual design feature, special conditions are prescribed under Sec. 21.16... A350-900 series airplane will incorporate the following novel or unusual design features: a braking...-0890; Notice No. 25-13-10-SC] Special Conditions: Airbus, Model A350-900 Series Airplane; Ground...

78 FR 75287 - Special Conditions: Bombardier Inc., Models BD-500-1A10 and BD-500-1A11 Series Airplanes; Flight...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-11

... appropriate safety standards for the C-series airplanes because of a novel or unusual design feature, special... Features The C-series airplanes will incorporate the following novel or unusual design features: new... Series Airplanes; Flight Envelope Protection: General Limiting Requirements AGENCY: Federal Aviation...

77 FR 64025 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Interaction of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

... series airplanes with modification 160023 (Sharklet). These airplanes will have novel or unusual design... novel or unusual design features on the model series of airplanes listed above. It is not a rule of... Series Airplanes; Interaction of Systems and Structures AGENCY: Federal Aviation Administration (FAA...

Heterogeneity in application, design, and analysis characteristics was found for controlled before-after and interrupted time series studies included in Cochrane reviews.

PubMed

Polus, Stephanie; Pieper, Dawid; Burns, Jacob; Fretheim, Atle; Ramsay, Craig; Higgins, Julian P T; Mathes, Tim; Pfadenhauer, Lisa M; Rehfuess, Eva A

2017-11-01

The aim of the study was to examine the application, design, and analysis characteristics of controlled before-after (CBA) and interrupted time series (ITS) studies and their use in Cochrane reviews. We searched the Cochrane library for reviews including these study designs from May 2012 to March 2015 and purposively selected, where available, two reviews each across 10 prespecified intervention types. We randomly selected two CBA and two ITS studies from each review. Two researchers independently extracted information from the studies and the respective reviews. Sixty-nine reviews considered CBA and ITS studies for inclusion. We analyzed 21 CBA and 16 ITS studies from 11 to 8 reviews, respectively. Cochrane reviews inconsistently defined and labeled CBA and ITS studies. Many studies did not meet the Cochrane definition or the minimum criteria provided by Cochrane Effective Practice and Organisation of Care. The studies present a heterogeneous set of study features and applied a large variety of analyses. While CBA and ITS studies represent important study designs to evaluate the effects of interventions, especially on a population or organizational level, unclear study design features challenge unequivocal classification and appropriate use. We discuss options for more specific definitions and explicit criteria for CBA and ITS studies. Copyright © 2017 Elsevier Inc. All rights reserved.

77 FR 34023 - Notice of Public Workshop: “Designing for Impact: Workshop on Building the National Network for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-08

... series of public workshops entitled ``Designing for Impact: Workshop on Building the National Network for... Education and Workforce Development. The Designing for Impact workshop series is organized by... series will be held on Monday, July 9, 2012 from 8:00 a.m. until 4:30 p.m. Eastern time. Event check-in...

Solar + Storage Synergies for Managing Commercial-Customer Demand Charges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gagnon, P.; Govindarajan, A.; Bird, L.

Demand charges, which are based on a customer’s maximum demand in kilowatts (kW), are a common element of electricity rate structures for commercial customers. Customer-sited solar photovoltaic (PV) systems can potentially reduce demand charges, but the level of savings is difficult to predict, given variations in demand charge designs, customer loads, and PV generation profiles. Lawrence Berkeley National Laboratory (Berkeley Lab) and the National Renewable Energy Laboratory (NREL) are collaborating on a series of studies to understand how solar PV can impact demand charges. Prior studies in the series examined demand charge reductions from solar on a stand-alone basis formore » residential and commercial customers. Those earlier analyses found that solar, alone, has limited ability to reduce demand charges depending on the specific design of the demand charge and on the shape of the customer’s load profile. This latest analysis estimates demand charge savings from solar in commercial buildings when co-deployed with behind-the-meter storage, highlighting the complementary roles of the two technologies. The analysis is based on simulated loads, solar generation, and storage dispatch across a wide variety of building types, locations, system configurations, and demand charge designs.« less

Rational design and synthesis of 2-anilinopyridinyl-benzothiazole Schiff bases as antimitotic agents.

PubMed

Shaik, Thokhir B; Hussaini, S M Ali; Nayak, V Lakshma; Sucharitha, M Lakshmi; Malik, M Shaheer; Kamal, Ahmed

2017-06-01

Based on our previous results and literature precedence, a series of 2-anilinopyridinyl-benzothiazole Schiff bases were rationally designed by performing molecular modeling experiments on some selected molecules. The binding energies of the docked molecules were better than the E7010, and the Schiff base with trimethoxy group on benzothiazole moiety, 4y was the best. This was followed by the synthesis of a series of the designed molecules by a convenient synthetic route and evaluation of their anticancer potential. Most of the compounds have shown significant growth inhibition against the tested cell lines and the compound 4y exhibited good antiproliferative activity with a GI 50 value of 3.8µM specifically against the cell line DU145. In agreement with the docking results, 4y exerted cytotoxicity by the disruption of the microtubule dynamics by inhibiting tubulin polymerization via effective binding into colchicine domain, comparable to E7010. Detailed binding modes of 4y with colchicine binding site of tubulin were studied by molecular docking. Furthermore, 4y induced apoptosis as evidenced by biological studies like mitochondrial membrane potential, caspase-3, and Annexin V-FITC assays. Copyright © 2017 Elsevier Ltd. All rights reserved.

Quantification of hepatic flow distribution using particle tracking for patient specific virtual Fontan surgery

NASA Astrophysics Data System (ADS)

Yang, Weiguang; Vignon-Clementel, Irene; Troianowski, Guillaume; Shadden, Shawn; Mohhan Reddy, V.; Feinstein, Jeffrey; Marsden, Alison

2010-11-01

The Fontan surgery is the third and final stage in a palliative series to treat children with single ventricle heart defects. In the extracardiac Fontan procedure, the inferior vena cava (IVC) is connected to the pulmonary arteries via a tube-shaped Gore-tex graft. Clinical observations have shown that the absence of a hepatic factor, carried in the IVC flow, can cause pulmonary arteriovenous malformations. Although it is clear that hepatic flow distribution is an important determinant of Fontan performance, few studies have quantified its relation to Fontan design. In this study, we virtually implanted three types of grafts (T-junction, offset and Y-graft) into 5 patient specific models of the Glenn (stage 2) anatomy. We then performed 3D time-dependent simulations and systematically compared the IVC flow distribution, energy loss, and pressure levels in different surgical designs. A robustness test is performed to evaluate the sensitivity of hepatic distribution to pulmonary flow split. Results show that the Y-graft design effectively improves the IVC flow distribution, compared to traditional designs and that surgical designs could be customized on a patient-by-patient basis.

Case reports and case series in prehospital emergency care research.

PubMed

Patterson, P Daniel; Weaver, Matthew; Clark, Sunday; Yealy, Donald M

2010-11-01

Research begins with a clearly stated question, problem or hypothesis. The selection of a study design appropriate to the task is the next key step. This paper provides guidance for the use of case report and case series designs by describing the 'what', 'when' and 'how' of both designs. Also described is the use of case reports and case series study designs in prehospital emergency research and the quality of published literature from 2000 to mid-2008.

Ambient temperature and coronary heart disease mortality in Beijing, China: a time series study

PubMed Central

2012-01-01

Background Many studies have examined the association between ambient temperature and mortality. However, less evidence is available on the temperature effects on coronary heart disease (CHD) mortality, especially in China. In this study, we examined the relationship between ambient temperature and CHD mortality in Beijing, China during 2000 to 2011. In addition, we compared time series and time-stratified case-crossover models for the non-linear effects of temperature. Methods We examined the effects of temperature on CHD mortality using both time series and time-stratified case-crossover models. We also assessed the effects of temperature on CHD mortality by subgroups: gender (female and male) and age (age > =65 and age < 65). We used a distributed lag non-linear model to examine the non-linear effects of temperature on CHD mortality up to 15 lag days. We used Akaike information criterion to assess the model fit for the two designs. Results The time series models had a better model fit than time-stratified case-crossover models. Both designs showed that the relationships between temperature and group-specific CHD mortality were non-linear. Extreme cold and hot temperatures significantly increased the risk of CHD mortality. Hot effects were acute and short-term, while cold effects were delayed by two days and lasted for five days. The old people and women were more sensitive to extreme cold and hot temperatures than young and men. Conclusions This study suggests that time series models performed better than time-stratified case-crossover models according to the model fit, even though they produced similar non-linear effects of temperature on CHD mortality. In addition, our findings indicate that extreme cold and hot temperatures increase the risk of CHD mortality in Beijing, China, particularly for women and old people. PMID:22909034

Lithium/sulfur dioxide cell and battery safety

NASA Technical Reports Server (NTRS)

Halpert, G.; Anderson, A.

1982-01-01

The new high-energy lithium/sulfur dioxide primary electrochemical cell, having a number of advantages, has received considerable attention as a power source in the past few years. With greater experience and improved design by the manufacturers, this system can be used in a safe manner provided the guidelines for use and safety precautions described herein are followed. In addition to a description of cell design and appropriate definitions, there is a safety precautions checklist provided to guide the user. Specific safety procedures for marking, handling, transportation, and disposal are also given, as is a suggested series of tests, to assure manufacturer conformance to requirements.

Utilization of the NASA Robonaut as a Surgical Avatar in Telemedicine

NASA Technical Reports Server (NTRS)

Dean, Marc; Diftler, Myron

2015-01-01

The concept of teleoperated robotic surgery is not new; however, most of the work to date has utilized specialized robots designed for specific set of surgeries. This activity explores the use of a humanoid robot to perform surgical procedures using the same hand held instruments that a human surgeon employs. For this effort, the tele-operated Robonaut (R2) was selected due to its dexterity, its ability to perform a wide range of tasks, and its adaptability to changing environments. To evaluate this concept, a series of challenges was designed with the goal of assessing the feasibility of utilizing Robonaut as a telemedicine based surgical avatar.

Potential applications of MMC and aluminum-lithium alloys in cameras for CRAF spacecraft. [Comet Rendezvous Asteroid Flyby Mission

NASA Technical Reports Server (NTRS)

Lane, Marc; Hsieh, Cheng; Adams, Lloyd

1989-01-01

In undertaking the design of a 2000-mm focal length camera for the Mariner Mark II series of spacecraft, JPL sought novel materials with the requisite dimensional and thermal stability, outgassing and corrosion resistance, low mass, high stiffness, and moderate cost. Metal-matrix composites and Al-Li alloys have, in addition to excellent mechanical properties and low density, a suitably low coefficient of thermal expansion, high specific stiffness, and good electrical conductivity. The greatest single obstacle to application of these materials to camera structure design is noted to have been the lack of information regarding long-term dimensional stability.

Design of Refractory Metal Life Test Heat Pipe and Calorimeter

NASA Technical Reports Server (NTRS)

Martin, J. J.; Reid, R. S.; Bragg-Sitton, S. M.

2010-01-01

Heat pipe life tests have seldom been conducted on a systematic basis. Typically, one or more heat pipes are built and tested for an extended period at a single temperature with simple condenser loading. Results are often reported describing the wall material, working fluid, test temperature, test duration, and occasionally the nature of any failure. Important information such as design details, processing procedures, material assay, power throughput, and radial power density are usually not mentioned. We propose to develop methods to generate carefully controlled data that conclusively establish heat pipe operating life with material-fluid combinations capable of extended operation. The test approach detailed in this Technical Publication will use 16 Mo-44.5%Re alloy/sodium heat pipe units that have an approximate12-in length and 5/8-in diameter. Two specific test series have been identified: (1) Long-term corrosion rates based on ASTM-G-68-80 (G-series) and (2) corrosion trends in a cross-correlation sequence at various temperatures and mass fluences based on a Fisher multifactor design (F-series). Evaluation of the heat pipe hardware will be performed in test chambers purged with an inert purified gas (helium or helium/argon mixture) at low pressure (10-100 torr) to provide thermal coupling between the heat pipe condenser and calorimeter. The final pressure will be selected to minimize the potential for voltage breakdown between the heat pipe and radio frequency (RF) induction coil (RF heating is currently the planned method of powering the heat pipes). The proposed calorimeter is constructed from a copper alloy and relies on a laminar flow water-coolant channel design to absorb and transport energy

Development and Evaluation of Titanium Space Suit Bearings

NASA Technical Reports Server (NTRS)

Rhodes, Richard; Battisti, Brian; Ytuarte, Ray, Jr.; Schultz, Bradley

2016-01-01

The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z series of spacesuits, designed with the intent of meeting a wide variety of exploration mission objectives, including human exploration of the Martian surface. Incorporating titanium bearings into the Z series space suit architecture allows us to reduce mass by an estimated 23 pounds per suit system compared to the previously used stainless steel bearing designs without compromising suit functionality. There are two obstacles to overcome when using titanium for a bearing race: 1) titanium is flammable when exposed to the oxygen wetted environment inside the space suit and 2) titanium's poor wear properties are often challenging to overcome in tribology applications. In order to evaluate the ignitability of a titanium space suit bearing, a series of tests were conducted at White Sands Test Facility that introduced the bearings to an extreme test profile, with multiple failures imbedded into the test bearings. The testing showed no signs of ignition in the most extreme test cases; however, substantial wear of the bearing races was observed. In order to design a bearing that can last an entire exploration mission (approximately 2 years), bearing test rigs were developed that allow for the quick evaluation of various bearing ball loads, ball diameters, lubricants, and surface treatments. This test data will allow designers to minimize the titanium bearing mass for a specific material and lubricant combination around a maximum contact stress that will allow the bearing to survive the life of an exploration mission. This paper reviews the current research and testing that has been performed on titanium bearing races to evaluate the use of such materials in an enriched oxygen environment and to optimize the bearing assembly mass and tribological properties to accommodate for the high bearing cycle life for an exploration mission.

14 CFR 26.35 - Changes to type certificates affecting fuel tank flammability.

Code of Federal Regulations, 2014 CFR

2014-01-01

...—Airbus A318, A319, A320, A321 Series A300, A310 Series A330, A340 Series (d) Design Changes and Service...) Applicability. This section applies to holders and applicants for approvals of the following design changes to any airplane subject to 14 CFR 26.33(a): (1) Any fuel tank designed to be Normally Emptied if the fuel...

14 CFR 26.35 - Changes to type certificates affecting fuel tank flammability.

Code of Federal Regulations, 2013 CFR

2013-01-01

...—Airbus A318, A319, A320, A321 Series A300, A310 Series A330, A340 Series (d) Design Changes and Service...) Applicability. This section applies to holders and applicants for approvals of the following design changes to any airplane subject to 14 CFR 26.33(a): (1) Any fuel tank designed to be Normally Emptied if the fuel...

14 CFR 26.35 - Changes to type certificates affecting fuel tank flammability.

Code of Federal Regulations, 2010 CFR

2010-01-01

...—Airbus A318, A319, A320, A321 Series A300, A310 Series A330, A340 Series (d) Design Changes and Service...) Applicability. This section applies to holders and applicants for approvals of the following design changes to any airplane subject to 14 CFR 26.33(a): (1) Any fuel tank designed to be Normally Emptied if the fuel...

14 CFR 26.35 - Changes to type certificates affecting fuel tank flammability.

Code of Federal Regulations, 2012 CFR

2012-01-01

...—Airbus A318, A319, A320, A321 Series A300, A310 Series A330, A340 Series (d) Design Changes and Service...) Applicability. This section applies to holders and applicants for approvals of the following design changes to any airplane subject to 14 CFR 26.33(a): (1) Any fuel tank designed to be Normally Emptied if the fuel...

14 CFR 26.35 - Changes to type certificates affecting fuel tank flammability.

Code of Federal Regulations, 2011 CFR

2011-01-01

...—Airbus A318, A319, A320, A321 Series A300, A310 Series A330, A340 Series (d) Design Changes and Service...) Applicability. This section applies to holders and applicants for approvals of the following design changes to any airplane subject to 14 CFR 26.33(a): (1) Any fuel tank designed to be Normally Emptied if the fuel...

Information content of household-stratified epidemics.

PubMed

Kinyanjui, T M; Pellis, L; House, T

2016-09-01

Household structure is a key driver of many infectious diseases, as well as a natural target for interventions such as vaccination programs. Many theoretical and conceptual advances on household-stratified epidemic models are relatively recent, but have successfully managed to increase the applicability of such models to practical problems. To be of maximum realism and hence benefit, they require parameterisation from epidemiological data, and while household-stratified final size data has been the traditional source, increasingly time-series infection data from households are becoming available. This paper is concerned with the design of studies aimed at collecting time-series epidemic data in order to maximize the amount of information available to calibrate household models. A design decision involves a trade-off between the number of households to enrol and the sampling frequency. Two commonly used epidemiological study designs are considered: cross-sectional, where different households are sampled at every time point, and cohort, where the same households are followed over the course of the study period. The search for an optimal design uses Bayesian computationally intensive methods to explore the joint parameter-design space combined with the Shannon entropy of the posteriors to estimate the amount of information in each design. For the cross-sectional design, the amount of information increases with the sampling intensity, i.e., the designs with the highest number of time points have the most information. On the other hand, the cohort design often exhibits a trade-off between the number of households sampled and the intensity of follow-up. Our results broadly support the choices made in existing epidemiological data collection studies. Prospective problem-specific use of our computational methods can bring significant benefits in guiding future study designs. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Centrifugal and Axial Pump Design and Off-Design Performance Prediction

NASA Technical Reports Server (NTRS)

Veres, Joseph P.

1995-01-01

A meanline pump-flow modeling method has been developed to provide a fast capability for modeling pumps of cryogenic rocket engines. Based on this method, a meanline pump-flow code PUMPA was written that can predict the performance of pumps at off-design operating conditions, given the loss of the diffusion system at the design point. The design-point rotor efficiency and slip factors are obtained from empirical correlations to rotor-specific speed and geometry. The pump code can model axial, inducer, mixed-flow, and centrifugal pumps and can model multistage pumps in series. The rapid input setup and computer run time for this meanline pump flow code make it an effective analysis and conceptual design tool. The map-generation capabilities of the code provide the information needed for interfacing with a rocket engine system modeling code. The off-design and multistage modeling capabilities of PUMPA permit the user to do parametric design space exploration of candidate pump configurations and to provide head-flow maps for engine system evaluation.

WE-DE-207B-11: Implementation of Size-Specific 3D Beam Modulation Filters On a Dedicated Breast CT Platform Using Breast Immobilization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hernandez, A; Boone, J

Purpose: To implement a 3D beam modulation filter (3D-BMF) in dedicated breast CT (bCT) and develop a method for conforming the patient’s breast to a pre-defined shape, optimizing the effects of the filter. This work expands on previous work reporting the methodology for designing a 3D-BMF that can spare unnecessary dose and improve signal equalization at the detector by preferentially filtering the beam in the thinner anterior and peripheral breast regions. Methods: Effective diameter profiles were measured for 219 segmented bCT images, grouped into volume quintiles, and averaged within each group to represent the range of breast sizes found clinically.more » These profiles were then used to generate five size-specific computational phantoms and fabricate five size-specific UHMW phantoms. Each computational phantom was utilized for designing a size-specific 3D-BMF using previously reported methods. Glandular dose values and projection images were simulated in MCNP6 with and without the 3DBMF using the system specifications of our prototype bCT scanner “Doheny”. Lastly, thermoplastic was molded around each of the five phantom sizes and used to produce a series of breast immobilizers for use in conforming the patient’s breast during bCT acquisition. Results: After incorporating the 3D-BMF, MC simulations estimated an 80% average reduction in the detector dynamic range requirements across all phantom sizes. The glandular dose was reduced on average 57% after normalizing by the number of quanta reaching the detector under the thickest region of the breast. Conclusion: A series of bCT-derived breast phantoms were used to design size-specific 3D-BMFs and breast immobilizers that can be used on the bCT platform to conform the patient’s breast and therefore optimally exploit the benefits of the 3D-BMF. Current efforts are focused on fabricating several prototype 3D-BMFs and performing phantom scans on Doheny for MC simulation validation and image quality analysis. Research reported in this paper was supported in part by the National Cancer Institute of the National Institutes of Health under award R01CA181081. The content is solely the responsibility of the authors and does not necessarily represent the official views of the National Institue of Health.« less

How Preferences for Public Participation are Linked to Perceptions of the Context, Preferences for Outcomes, and Individual Characteristics

NASA Astrophysics Data System (ADS)

Tuler, Seth; Webler, Thomas

2010-08-01

Practitioners and stakeholders involved in environmental and risk assessment and decision-making efforts have access to a growing list of policies and guidance for implementing good process. The advice is often general. There is little understanding of how situation specific features are relevant in new circumstances. In a series of ten case studies we investigated how people’s (a) perceptions of the context, (b) preferences for outcomes, and (c) affiliations, experiences and motivations are related to their preferences for process features in a particular situation. The cases are in three policy areas: watershed management, forestry management, and clean-up and public health management of radioactively contaminated sites. We conclude this paper with a discussion of how the results can inform process design. Process design should be based on a diagnostic approach that specifically assesses relevant situational characteristics.

A conceptual framework for the domain of evidence-based design.

PubMed

Ulrich, Roger S; Berry, Leonard L; Quan, Xiaobo; Parish, Janet Turner

2010-01-01

The physical facilities in which healthcare services are performed play an important role in the healing process. Evidence-based design in healthcare is a developing field of study that holds great promise for benefiting key stakeholders: patients, families, physicians, and nurses, as well as other healthcare staff and organizations. In this paper, the authors present and discuss a conceptual framework intended to capture the current domain of evidence-based design in healthcare. In this framework, the built environment is represented by nine design variable categories: audio environment, visual environment, safety enhancement, wayfinding system, sustainability, patient room, family support spaces, staff support spaces, and physician support spaces. Furthermore, a series of matrices is presented that indicates knowledge gaps concerning the relationship between specific healthcare facility design variable categories and participant and organizational outcomes. From this analysis, the authors identify fertile research opportunities from the perspectives of key stakeholders.

Handbook for Using the Intensive Time-Series Design.

ERIC Educational Resources Information Center

Mayer, Victor J.; Monk, John S.

Work on the development of the intensive time-series design was initiated because of the dissatisfaction with existing research designs. This dissatisfaction resulted from the paucity of data obtained from designs such as the pre-post and randomized posttest-only designs. All have the common characteristic of yielding data from only one or two…

DoD Fuel Facilities Criteria

DTIC Science & Technology

2015-04-27

Pantograph Feb-2010 UFGS 33 58 00 Leak Detection for Fueling Systems Apr-2008 UFGS 33 52 43.13 Aviation Fuel Piping Feb-2010 UFGS 33 59 00 Tightness of... Pipeline Pressure Testing Guidelines  Specifications  Questions 2 7/12/2017 3 7/12/2017 DoD Fuels Facilities Documents  Unified...UFGS)  Most in the 33 nn nn series  Associated with Standard Designs  Available on WBDG site  Coating Systems 4 7/12/2017 Pipeline

Thundercloud: Domain specific information security training for the smart grid

NASA Astrophysics Data System (ADS)

Stites, Joseph

In this paper, we describe a cloud-based virtual smart grid test bed: ThunderCloud, which is intended to be used for domain-specific security training applicable to the smart grid environment. The test bed consists of virtual machines connected using a virtual internal network. ThunderCloud is remotely accessible, allowing students to undergo educational exercises online. We also describe a series of practical exercises that we have developed for providing the domain-specific training using ThunderCloud. The training exercises and attacks are designed to be realistic and to reflect known vulnerabilities and attacks reported in the smart grid environment. We were able to use ThunderCloud to offer practical domain-specific security training for smart grid environment to computer science students at little or no cost to the department and no risk to any real networks or systems.

A Personalized Predictive Framework for Multivariate Clinical Time Series via Adaptive Model Selection.

PubMed

Liu, Zitao; Hauskrecht, Milos

2017-11-01

Building of an accurate predictive model of clinical time series for a patient is critical for understanding of the patient condition, its dynamics, and optimal patient management. Unfortunately, this process is not straightforward. First, patient-specific variations are typically large and population-based models derived or learned from many different patients are often unable to support accurate predictions for each individual patient. Moreover, time series observed for one patient at any point in time may be too short and insufficient to learn a high-quality patient-specific model just from the patient's own data. To address these problems we propose, develop and experiment with a new adaptive forecasting framework for building multivariate clinical time series models for a patient and for supporting patient-specific predictions. The framework relies on the adaptive model switching approach that at any point in time selects the most promising time series model out of the pool of many possible models, and consequently, combines advantages of the population, patient-specific and short-term individualized predictive models. We demonstrate that the adaptive model switching framework is very promising approach to support personalized time series prediction, and that it is able to outperform predictions based on pure population and patient-specific models, as well as, other patient-specific model adaptation strategies.

Retrofit and verification test of a 30-cm ion thruster

NASA Technical Reports Server (NTRS)

Dulgeroff, C. R.; Poeschel, R. L.

1980-01-01

Twenty modifications were found to be necessary and were approved by design review. These design modifications were incorporated in the thruster documents (drawings and procedures) to define the J series thruster. Sixteen of the design revisions were implemented in a 900 series thruster by retrofit modification. A standardized set of test procedures was formulated, and the retrofit J series thruster design was verified by test. Some difficulty was observed with the modification to the ion optics assembly, but the overall effect of the design modification satisfies the design objectives. The thruster was tested over a wide range of operating parameters to demonstrate its capabilities.

Design and application of a new series of gallbladder endoscopes that facilitate gallstone removal without gallbladder excision

NASA Astrophysics Data System (ADS)

Qiao, Tie; Huang, Wan-Chao; Luo, Xiao-Bing; Zhang, Yang-De

2012-01-01

In recent years, some Chinese doctors have proposed a new concept, gallstone removal without gallbladder excision, along with transition of the medical model. As there is no specialized endoscope for gallstone removal without gallbladder excision, we designed and produced a new series of gallbladder endoscopes and accessories that have already been given a Chinese invention patent (No. ZL200810199041.2). The design of these gallbladder endoscopes was based on the anatomy and physiology of the gallbladder, characteristics of gallbladder disease, ergonomics, and industrial design. This series of gallbladder endoscopes underwent clinical trials in two hospitals appointed by the State Administration of Traditional Chinese Medicine. The clinical trials showed that surgeries of gallstones, gallbladder polyps, and cystic duct calculus could be smoothly performed with these products. In summary, this series of gallbladder endoscopes is safe, reliable, and effective for gallstone removal without gallbladder excision. This note comprehensively introduces the research and design of this series of gallbladder endoscopes.

Comparison of Statistical Algorithms for the Detection of Infectious Disease Outbreaks in Large Multiple Surveillance Systems

PubMed Central

Farrington, C. Paddy; Noufaily, Angela; Andrews, Nick J.; Charlett, Andre

2016-01-01

A large-scale multiple surveillance system for infectious disease outbreaks has been in operation in England and Wales since the early 1990s. Changes to the statistical algorithm at the heart of the system were proposed and the purpose of this paper is to compare two new algorithms with the original algorithm. Test data to evaluate performance are created from weekly counts of the number of cases of each of more than 2000 diseases over a twenty-year period. The time series of each disease is separated into one series giving the baseline (background) disease incidence and a second series giving disease outbreaks. One series is shifted forward by twelve months and the two are then recombined, giving a realistic series in which it is known where outbreaks have been added. The metrics used to evaluate performance include a scoring rule that appropriately balances sensitivity against specificity and is sensitive to variation in probabilities near 1. In the context of disease surveillance, a scoring rule can be adapted to reflect the size of outbreaks and this was done. Results indicate that the two new algorithms are comparable to each other and better than the algorithm they were designed to replace. PMID:27513749

Use of Time-Series, ARIMA Designs to Assess Program Efficacy.

ERIC Educational Resources Information Center

Braden, Jeffery P.; And Others

1990-01-01

Illustrates use of time-series designs for determining efficacy of interventions with fictitious data describing drug-abuse prevention program. Discusses problems and procedures associated with time-series data analysis using Auto Regressive Integrated Moving Averages (ARIMA) models. Example illustrates application of ARIMA analysis for…

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2014 CFR

2014-07-01

... applicable to each series of bonds and savings notes for each specific year, which has varied from time to..., DEPARTMENT OF THE TREASURY BUREAU OF THE FISCAL SERVICE REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B... Limitations. Specific limitations have been placed on the amounts of bonds of each series and savings notes...

Arlequin suite ver 3.5: a new series of programs to perform population genetics analyses under Linux and Windows.

PubMed

Excoffier, Laurent; Lischer, Heidi E L

2010-05-01

We present here a new version of the Arlequin program available under three different forms: a Windows graphical version (Winarl35), a console version of Arlequin (arlecore), and a specific console version to compute summary statistics (arlsumstat). The command-line versions run under both Linux and Windows. The main innovations of the new version include enhanced outputs in XML format, the possibility to embed graphics displaying computation results directly into output files, and the implementation of a new method to detect loci under selection from genome scans. Command-line versions are designed to handle large series of files, and arlsumstat can be used to generate summary statistics from simulated data sets within an Approximate Bayesian Computation framework. © 2010 Blackwell Publishing Ltd.

Structural correlation between lipophilicity and lipopolysaccharide-sequestering activity in spermine-sulfonamide analogs.

PubMed

Burns, Mark R; Jenkins, Scott A; Vermeulen, Nicolas M; Balakrishna, Rajalakshmi; Nguyen, Thuan B; Kimbrell, Matthew R; David, Sunil A

2006-12-15

Lipopolysaccharides (LPS), otherwise termed 'endotoxins', are outer-membrane constituents of Gram-negative bacteria, and play a key role in the pathogenesis of 'Septic Shock', a major cause of mortality in the critically ill patient. We had previously defined the pharmacophore necessary for small molecules to specifically bind and neutralize this complex carbohydrate. A series of aryl and aliphatic spermine-sulfonamide analogs were synthesized and tested in a series of binding and cell-based assays in order to probe the effect of lipophilicity on sequestration ability. A strong correlation was indeed found, supporting the hypothesis that endotoxin-neutralizing ability involves a lipophilic or membrane attachment event. The research discussed herein may be useful for the design of additional carbohydrate recognizing molecules and endotoxin-neutralizing drugs.

SPITZER IRAC PHOTOMETRY FOR TIME SERIES IN CROWDED FIELDS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Novati, S. Calchi; Beichman, C.; Gould, A.

We develop a new photometry algorithm that is optimized for the Infrared Array Camera (IRAC) Spitzer time series in crowded fields and that is particularly adapted to faint or heavily blended targets. We apply this to the 170 targets from the 2015 Spitzer microlensing campaign and present the results of three variants of this algorithm in an online catalog. We present detailed accounts of the application of this algorithm to two difficult cases, one very faint and the other very crowded. Several of Spitzer's instrumental characteristics that drive the specific features of this algorithm are shared by Kepler and WFIRST,more » implying that these features may prove to be a useful starting point for algorithms designed for microlensing campaigns by these other missions.« less

Design, fabrication and test of graphite/polymide composite joints and attachments: Summary

NASA Technical Reports Server (NTRS)

Cushman, J. B.; Mccleskey, S. F.; Ward, S. H.

1983-01-01

The design, analysis and testing performed to develop four types of graphite/polyimide (Gr/PI) bonded and bolted composite joints for lightly loaded control surfaces on advanced space transportation systems that operate at temperatures up to 561K (550 F) are summarized. Material properties and 'small specimen' tests were conducted to establish design data and to evaluate specific design details. 'Static discriminator' tests were conducted on preliminary designs to verify structural adequacy. Scaled up specimens of the final joint designs, representative of production size requirements, were subjected to a series of static and fatigue tests to evaluate joint strength. Effects of environmental conditioning were determined by testing aged (125 hours 589K (600 F)) and thermal cycled (116K to 589K (-250 F to 600 F), 125 times) specimens. It is concluded Gr/PI joints can be designed and fabricated to carry the specified loads. Test results also indicate a possible resin loss or degradation of laminates after exposure to 589K (600 F) for 125 hours.

Design, fabrication and test of graphite/polyimide composite joints and attachments. [spacecraft control surfaces

NASA Technical Reports Server (NTRS)

Cushman, J. B.; Mccleskey, S. F.; Ward, S. H.

1982-01-01

The design, analysis, and testing performed to develop four types of graphite/polyimide (Gr/PI) bonded and bolted composite joints for lightly loaded control surfaces on advanced space transportation systems that operate at temperatures up to 561 K (550 F) are summarized. Material properties and small specimen tests were conducted to establish design data and to evaluate specific design details. Static discriminator tests were conducted on preliminary designs to verify structural adequacy. Scaled up specimens of the final joint designs, representative of production size requirements, were subjected to a series of static and fatigue tests to evaluate joint strength. Effects of environmental conditioning were determined by testing aged (125 hours at 589 K (600 F)) and thermal cycled (116 K to 589 K (-250 F to 600 F), 125 times) specimens. It is concluded Gr/PI joints can be designed and fabricated to carry the specified loads. Test results also indicate a possible resin loss or degradation of laminates after exposure to 589 K (600 F) for 125 hours.

Optimum Design of LLC Resonant Converter using Inductance Ratio (Lm/Lr)

NASA Astrophysics Data System (ADS)

Palle, Kowstubha; Krishnaveni, K.; Ramesh Reddy, Kolli

2017-06-01

The main benefits of LLC resonant dc/dc converter over conventional series and parallel resonant converters are its light load regulation, less circulating currents, larger bandwidth for zero voltage switching, and less tuning of switching frequency for controlled output. An unique analytical tool, called fundamental harmonic approximation with peak gain adjustment is used for designing the converter. In this paper, an optimum design of the converter is proposed by considering three different design criterions with different values of inductance ratio (Lm/Lr) to achieve good efficiency at high input voltage. The optimum design includes the analysis in operating range, switching frequency range, primary side losses of a switch and stability. The analysis is carried out with simulation using the software tools like MATLAB and PSIM. The performance of the optimized design is demonstrated for a design specification of 12 V, 5 A output operating with an input voltage range of 300-400 V using FSFR 2100 IC of Texas instruments.

Energy harvesting using AC machines with high effective pole count

NASA Astrophysics Data System (ADS)

Geiger, Richard Theodore

In this thesis, ways to improve the power conversion of rotating generators at low rotor speeds in energy harvesting applications were investigated. One method is to increase the pole count, which increases the generator back-emf without also increasing the I2R losses, thereby increasing both torque density and conversion efficiency. One machine topology that has a high effective pole count is a hybrid "stepper" machine. However, the large self inductance of these machines decreases their power factor and hence the maximum power that can be delivered to a load. This effect can be cancelled by the addition of capacitors in series with the stepper windings. A circuit was designed and implemented to automatically vary the series capacitance over the entire speed range investigated. The addition of the series capacitors improved the power output of the stepper machine by up to 700%. At low rotor speeds, with the addition of series capacitance, the power output of the hybrid "stepper" was more than 200% that of a similarly sized PMDC brushed motor. Finally, in this thesis a hybrid lumped parameter / finite element model was used to investigate the impact of number, shape and size of the rotor and stator teeth on machine performance. A typical off-the-shelf hybrid stepper machine has significant cogging torque by design. This cogging torque is a major problem in most small energy harvesting applications. In this thesis it was shown that the cogging and ripple torque can be dramatically reduced. These findings confirm that high-pole-count topologies, and specifically the hybrid stepper configuration, are an attractive choice for energy harvesting applications.

The Validity and Precision of the Comparative Interrupted Time Series Design and the Difference-in-Difference Design in Educational Evaluation

ERIC Educational Resources Information Center

Somers, Marie-Andrée; Zhu, Pei; Jacob, Robin; Bloom, Howard

2013-01-01

In this paper, we examine the validity and precision of two nonexperimental study designs (NXDs) that can be used in educational evaluation: the comparative interrupted time series (CITS) design and the difference-in-difference (DD) design. In a CITS design, program impacts are evaluated by looking at whether the treatment group deviates from its…

Mammographic x-ray unit kilovoltage test tool based on k-edge absorption effect.

PubMed

Napolitano, Mary E; Trueblood, Jon H; Hertel, Nolan E; David, George

2002-09-01

A simple tool to determine the peak kilovoltage (kVp) of a mammographic x-ray unit has been designed. Tool design is based on comparing the effect of k-edge discontinuity of the attenuation coefficient for a series of element filters. Compatibility with the mammography accreditation phantom (MAP) to obtain a single quality control film is a second design objective. When the attenuation of a series of sequential elements is studied simultaneously, differences in the absorption characteristics due to the k-edge discontinuities are more evident. Specifically, when the incident photon energy is higher than the k-edge energy of a number of the elements and lower than the remainder, an inflection may be seen in the resulting attenuation data. The maximum energy of the incident photon spectra may be determined based on this inflection point for a series of element filters. Monte Carlo photon transport analysis was used to estimate the photon transmission probabilities for each of the sequential k-edge filter elements. The photon transmission corresponds directly to optical density recorded on mammographic x-ray film. To observe the inflection, the element filters chosen must have k-edge energies that span a range greater than the expected range of the end point energies to be determined. For the design, incident x-ray spectra ranging from 25 to 40 kVp were assumed to be from a molybdenum target. Over this range, the k-edge energy changes by approximately 1.5 keV between sequential elements. For this design 21 elements spanning an energy range from 20 to 50 keV were chosen. Optimum filter element thicknesses were calculated to maximize attenuation differences at the k-edge while maintaining optical densities between 0.10 and 3.00. Calculated relative transmission data show that the kVp could be determined to within +/-1 kV. To obtain experimental data, a phantom was constructed containing 21 different elements placed in an acrylic holder. MAP images were used to determine appropriate exposure techniques for a series of end point energies from 25 to 35 kVp. The average difference between the kVp determination and the calibrated dial setting was 0.8 and 1.0 kV for a Senographe 600 T and a Senographe DMR, respectively. Since the k-edge absorption energies of the filter materials are well known, independent calibration or a series of calibration curves is not required.

Improved Short-Circuit Protection for Power Cells in Series

NASA Technical Reports Server (NTRS)

Davies, Francis

2008-01-01

A scheme for protection against short circuits has been devised for series strings of lithium electrochemical cells that contain built-in short-circuit protection devices, which go into a high-resistance, current-limiting state when heated by excessive current. If cells are simply connected in a long series string to obtain a high voltage and a short circuit occurs, whichever short-circuit protection device trips first is exposed to nearly the full string voltage, which, typically, is large enough to damage the device. Depending on the specific cell design, the damage can defeat the protective function, cause a dangerous internal short circuit in the affected cell, and/or cascade to other cells. In the present scheme, reverse diodes rated at a suitably high current are connected across short series sub-strings, the lengths of which are chosen so that when a short-circuit protection device is tripped, the voltage across it does not exceed its rated voltage. This scheme preserves the resetting properties of the protective devices. It provides for bypassing of cells that fail open and limits cell reversal, though not as well as does the more-expensive scheme of connecting a diode across every cell.

The Design, Prototyping, and Formative Evaluation of an Assistive Robotic Table (ART) for Stroke Patients.

PubMed

Threatt, Anthony L; Merino, Jessica; Brooks, Johnell O; Healy, Stan; Truesdail, Constance; Manganelli, Joseph; Walker, Ian; Green, Keith Evan

2017-04-01

This article presents the results of an exploratory study in which 14 healthcare subject matter experts (H-SMEs) in addition to four research and design subject matter experts (RD-SMEs) at a regional rehabilitation hospital engaged in a series of complementary, participatory activities in order to design an assistive robotic table (ART). As designers, human factor experts, and healthcare professionals continue to work to integrate assistive human-robot technologies in healthcare, it is imperative to understand how the technology affects patient care from clinicians' perspectives. Fourteen clinical H-SMEs rated a subset of conceptual ART design ideas; participated in the iterative design process of ART; and evaluated a final cardboard prototype, the rehabilitation hospital's current over-the-bed table (OBT), an ART built with true materials, and two therapy surface prototypes. Four RD-SMEs conducted a heuristic evaluation on the ART built with true materials. Data were analyzed by frequency and content analysis. The results include a design and prototype for the next generation ART and a pneumatically controlled therapy surface, a broadened list of specifications for the future design and implementation of assistive robotic furniture, and final observations. When compared to the rehabilitation hospital's current OBT, the developed ART in this study was successful. Designing novel features is dependent upon ensuring patient safety. The inclusion of clinicians in the participatory iterative design and evaluation process and the use of personas provided a broadened list of specifications for the successful implementation of assistive robotic furniture.

Ares I Static Tests Design

NASA Technical Reports Server (NTRS)

Carson, William; Lindemuth, Kathleen; Mich, John; White, K. Preston; Parker, Peter A.

2009-01-01

Probabilistic engineering design enhances safety and reduces costs by incorporating risk assessment directly into the design process. In this paper, we assess the format of the quantitative metrics for the vehicle which will replace the Space Shuttle, the Ares I rocket. Specifically, we address the metrics for in-flight measurement error in the vector position of the motor nozzle, dictated by limits on guidance, navigation, and control systems. Analyses include the propagation of error from measured to derived parameters, the time-series of dwell points for the duty cycle during static tests, and commanded versus achieved yaw angle during tests. Based on these analyses, we recommend a probabilistic template for specifying the maximum error in angular displacement and radial offset for the nozzle-position vector. Criteria for evaluating individual tests and risky decisions also are developed.

USL NASA/RECON project presentations at the 1985 ACM Computer Science Conference: Abstracts and visuals

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Chum, Frank Y.; Gallagher, Suzy; Granier, Martin; Hall, Philip P.; Moreau, Dennis R.; Triantafyllopoulos, Spiros

1985-01-01

This Working Paper Series entry represents the abstracts and visuals associated with presentations delivered by six USL NASA/RECON research team members at the above named conference. The presentations highlight various aspects of NASA contract activities pursued by the participants as they relate to individual research projects. The titles of the six presentations are as follows: (1) The Specification and Design of a Distributed Workstation; (2) An Innovative, Multidisciplinary Educational Program in Interactive Information Storage and Retrieval; (3) Critical Comparative Analysis of the Major Commercial IS and R Systems; (4) Design Criteria for a PC-Based Common User Interface to Remote Information Systems; (5) The Design of an Object-Oriented Graphics Interface; and (6) Knowledge-Based Information Retrieval: Techniques and Applications.

Analytical methods development for supramolecular design in solar hydrogen production

NASA Astrophysics Data System (ADS)

Brown, J. R.; Elvington, M.; Mongelli, M. T.; Zigler, D. F.; Brewer, K. J.

2006-08-01

In the investigation of alternative energy sources, specifically, solar hydrogen production from water, the ability to perform experiments with a consistent and reproducible light source is key to meaningful photochemistry. The design, construction, and evaluation of a series of LED array photolysis systems for high throughput photochemistry have been performed. Three array systems of increasing sophistication are evaluated using calorimetric measurements and potassium tris(oxalato)ferrate(II) chemical actinometry and compared with a traditional 1000 W Xe arc lamp source. The results are analyzed using descriptive statistics and analysis of variance (ANOVA). The third generation array is modular, and controllable in design. Furthermore, the third generation array system is shown to be comparable in both precision and photonic output to a 1000 W Xe arc lamp.

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2013 CFR

2013-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2011 CFR

2011-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2010 CFR

2010-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

31 CFR 315.10 - Limitations.

Code of Federal Regulations, 2012 CFR

2012-07-01

... each series of bonds and savings notes for each specific year, which has varied from time to time, can..., DEPARTMENT OF THE TREASURY BUREAU OF THE PUBLIC DEBT REGULATIONS GOVERNING U.S. SAVINGS BONDS, SERIES A, B, C.... Specific limitations have been placed on the amounts of bonds of each series and savings notes that might...

Adaptive Augmenting Control Flight Characterization Experiment on an F/A-18

NASA Technical Reports Server (NTRS)

VanZwieten, Tannen S.; Gilligan, Eric T.; Wall, John H.; Orr, Jeb S.; Miller, Christopher J.; Hanson, Curtis E.

2014-01-01

The NASA Marshall Space Flight Center (MSFC) Flight Mechanics and Analysis Division developed an Adaptive Augmenting Control (AAC) algorithm for launch vehicles that improves robustness and performance by adapting an otherwise welltuned classical control algorithm to unexpected environments or variations in vehicle dynamics. This AAC algorithm is currently part of the baseline design for the SLS Flight Control System (FCS), but prior to this series of research flights it was the only component of the autopilot design that had not been flight tested. The Space Launch System (SLS) flight software prototype, including the adaptive component, was recently tested on a piloted aircraft at Dryden Flight Research Center (DFRC) which has the capability to achieve a high level of dynamic similarity to a launch vehicle. Scenarios for the flight test campaign were designed specifically to evaluate the AAC algorithm to ensure that it is able to achieve the expected performance improvements with no adverse impacts in nominal or nearnominal scenarios. Having completed the recent series of flight characterization experiments on DFRC's F/A-18, the AAC algorithm's capability, robustness, and reproducibility, have been successfully demonstrated. Thus, the entire SLS control architecture has been successfully flight tested in a relevant environment. This has increased NASA's confidence that the autopilot design is ready to fly on the SLS Block I vehicle and will exceed the performance of previous architectures.

Macro-channel cooled high power fiber coupled diode lasers exceeding 1.2kW of output power

NASA Astrophysics Data System (ADS)

Koenning, Tobias; Alegria, Kim; Wang, Zuolan; Segref, Armin; Stapleton, Dean; Faßbender, Wilhelm; Flament, Marco; Rotter, Karsten; Noeske, Axel; Biesenbach, Jens

2011-03-01

We report on a new series of fiber coupled diode laser modules exceeding 1.2kW of single wavelength optical power from a 400um / 0.2NA fiber. The units are constructed from passively cooled laser bars as opposed to other comparably powered, commercially available modules that use micro-channel heat-sinks. Micro-channel heat sinks require cooling water to meet demanding specifications and are therefore prone to failures due to contamination and increase the overall cost to operate and maintain the laser. Dilas' new series of high power fiber coupled diode lasers are designed to eliminate micro channel coolers and their associated failure mechanisms. Low-smile soldering processes were developed to maximize the brightness available from each diode laser bar. The diode laser brightness is optimally conserved using Dilas' recently developed propriety laser bar stacking geometry and optics. A total of 24 bars are coupled into a single fiber core using a polarization multiplexing scheme. The modular design permits further power scaling through wavelength multiplexing. Other customer critical features such as industrial grade fibers, pilot beams, fiber interlocks and power monitoring are standard features on these modules. The optical design and the beam parameter calculations will be presented to explain the inherit design trade offs. Results for single and dual wavelengths modules will be presented.

Magnet design for a low-emittance storage ring

PubMed Central

Johansson, Martin; Anderberg, Bengt; Lindgren, Lars-Johan

2014-01-01

The MAX IV 3 GeV storage ring, currently under construction, pursues the goal of low electron beam emittance by using a multi-bend achromat magnet lattice, which is realised by having several consecutive magnet elements precision-machined out of a common solid iron block, 2.3–3.4 m long. With this magnet design solution, instead of having 1320 individual magnets, the MAX IV 3 GeV storage ring is built up using 140 integrated ‘magnet block’ units, containing all these magnet elements. Major features of this magnet block design are compactness, vibration stability and that the alignment of magnet elements within each unit is given by the mechanical accuracy of the CNC machining rather than individual field measurement and adjustment. This article presents practical engineering details of implementing this magnet design solution, and mechanical + magnetic field measurement results from the magnet production series. At the time of writing (spring 2014), the production series, which is totally outsourced to industry, is roughly half way through, with mechanical/magnetic QA conforming to specifications. It is the conclusion of the authors that the MAX IV magnet block concept, which has sometimes been described as new or innovative, is from a manufacturing point of view simply a collection of known mature production methods and measurement procedures, which can be executed at fixed cost with a low level of risk. PMID:25177980

A modular toolset for recombination transgenesis and neurogenetic analysis of Drosophila.

PubMed

Wang, Ji-Wu; Beck, Erin S; McCabe, Brian D

2012-01-01

Transgenic Drosophila have contributed extensively to our understanding of nervous system development, physiology and behavior in addition to being valuable models of human neurological disease. Here, we have generated a novel series of modular transgenic vectors designed to optimize and accelerate the production and analysis of transgenes in Drosophila. We constructed a novel vector backbone, pBID, that allows both phiC31 targeted transgene integration and incorporates insulator sequences to ensure specific and uniform transgene expression. Upon this framework, we have built a series of constructs that are either backwards compatible with existing restriction enzyme based vectors or utilize Gateway recombination technology for high-throughput cloning. These vectors allow for endogenous promoter or Gal4 targeted expression of transgenic proteins with or without fluorescent protein or epitope tags. In addition, we have generated constructs that facilitate transgenic splice isoform specific RNA inhibition of gene expression. We demonstrate the utility of these constructs to analyze proteins involved in nervous system development, physiology and neurodegenerative disease. We expect that these reagents will facilitate the proficiency and sophistication of Drosophila genetic analysis in both the nervous system and other tissues.

Interview-based Qualitative Research in Emergency Care Part II: Data Collection, Analysis and Results Reporting.

PubMed

Ranney, Megan L; Meisel, Zachary F; Choo, Esther K; Garro, Aris C; Sasson, Comilla; Morrow Guthrie, Kate

2015-09-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. In Part I of this two-article series, we provided an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field (observation, individual interviews, and focus groups). Here in Part II of this series, we outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. © 2015 by the Society for Academic Emergency Medicine.

Qualitative Research in Emergency Care Part I: Research Principles and Common Applications.

PubMed

Choo, Esther K; Garro, Aris C; Ranney, Megan L; Meisel, Zachary F; Morrow Guthrie, Kate

2015-09-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. This article, Part I of a two-article series, provides an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field, including observation, individual interviews, and focus groups. In Part II of this series, we will outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. © 2015 by the Society for Academic Emergency Medicine.

Optically coded nanocrystal taggants and optical frequency IDs

NASA Astrophysics Data System (ADS)

Williams, George M., Jr.; Allen, Thomas; Dupuy, Charles; Novet, Thomas; Schut, David

2010-04-01

A series of nanocrystal and nanocrystal quantum dot taggant technologies were developed for covertly tagging and tracking objects of interest. Homogeneous and heterogeneous nanocrystal taggant designs were developed and optimized for ultraviolet through infrared emissions, utilizing either Dexter energy transfer or Förster resonant energy transfer (FRET) between specific absorbing and emitting functionalities. The conversion efficiency, target-specific identification, and adhesion properties of the taggants were engineered by means of various surface ligand chemistries. The ability to engineer poly-functional ligands was shown effective in the detection of a biological agent simulant, detected through a NC photoluminescence that is altered in the presence of the agent of interest; the technique has broad potential applicability to chemical, biological, and explosive (CBE) agent detection. The NC photoluminescence can be detected by a remote LIDAR system; the performance of a taggant system has been modeled and subsequently verified in a series of controlled field tests. LIDAR detection of visible-emitting taggants was shown to exceed 2.8 km in calibrated field tests, and from these field data and calibrated laboratory measurements we predict >5 km range in the covert shortwavelength infrared (SWIR) spectral region.

Qualitative Research in Emergency Care Part I: Research Principles and Common Applications

PubMed Central

Choo, Esther K.; Garro, Aris; Ranney, Megan L.; Meisel, Zachary; Guthrie, Kate Morrow

2015-01-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. This article, Part I of a two-article series, provides an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field, including observation, individual interviews, and focus groups. In Part II of this series, we will outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. PMID:26284696

Interview-Based Qualitative Research in Emergency Care Part II: Data Collection, Analysis and Results Reporting

PubMed Central

Ranney, Megan L.; Meisel, Zachary; Choo, Esther K.; Garro, Aris; Sasson, Comilla; Morrow, Kathleen

2015-01-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. In Part I of this two-article series, we provided an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field (observation, individual interviews, and focus groups). Here in Part II of this series, we outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. PMID:26284572

The Timeseries Toolbox - A Web Application to Enable Accessible, Reproducible Time Series Analysis

NASA Astrophysics Data System (ADS)

Veatch, W.; Friedman, D.; Baker, B.; Mueller, C.

2017-12-01

The vast majority of data analyzed by climate researchers are repeated observations of physical process or time series data. This data lends itself of a common set of statistical techniques and models designed to determine trends and variability (e.g., seasonality) of these repeated observations. Often, these same techniques and models can be applied to a wide variety of different time series data. The Timeseries Toolbox is a web application designed to standardize and streamline these common approaches to time series analysis and modeling with particular attention to hydrologic time series used in climate preparedness and resilience planning and design by the U. S. Army Corps of Engineers. The application performs much of the pre-processing of time series data necessary for more complex techniques (e.g. interpolation, aggregation). With this tool, users can upload any dataset that conforms to a standard template and immediately begin applying these techniques to analyze their time series data.

Steric and Thermodynamic Limits of Design for the Incorporation of Large UnNatural Amino Acids in Aminoacyl-tRNA Synthetase Enzymes

PubMed Central

Armen, Roger S.; Schiller, Stefan M.; Brooks, Charles L.

2015-01-01

Orthogonal aminoacyl-tRNA synthetase/tRNA pairs from archaea have been evolved to facilitate site specific in vivo incorporation of unnatural amino acids into proteins in Escherichia coli. Using this approach, unnatural amino acids have been successfully incorporated with high translational efficiency and fidelity. In this study, CHARMM-based molecular docking and free energy calculations were used to evaluate rational design of specific protein-ligand interactions for aminoacyl-tRNA synthetases. A series of novel unnatural amino acid ligands were docked into the p-benzoyl-L-phenylalanine tRNA synthetase, which revealed that the binding pocket of the enzyme does not provide sufficient space for significantly larger ligands. Specific binding site residues were mutated to alanine to create additional space to accommodate larger target ligands, and then mutations were introduced to improve binding free energy. This approach was used to redesign binding sites for several different target ligands, which were then tested against the standard 20 amino acids to verify target specificity. Only the synthetase designed to bind Man-α-O-Tyr was predicted to be sufficiently selective for the target ligand and also thermodynamically stable. Our study suggests that extensive redesign of the tRNA synthatase binding pocket for large bulky ligands may be quite thermodynamically unfavorable. PMID:20310065

Probing Nuclear Spin Effects on Electronic Spin Coherence via EPR Measurements of Vanadium(IV) Complexes.

PubMed

Graham, Michael J; Krzyaniak, Matthew D; Wasielewski, Michael R; Freedman, Danna E

2017-07-17

Quantum information processing (QIP) has the potential to transform numerous fields from cryptography, to finance, to the simulation of quantum systems. A promising implementation of QIP employs unpaired electronic spins as qubits, the fundamental units of information. Though molecular electronic spins offer many advantages, including chemical tunability and facile addressability, the development of design principles for the synthesis of complexes that exhibit long qubit superposition lifetimes (also known as coherence times, or T 2 ) remains a challenge. As nuclear spins in the local qubit environment are a primary cause of shortened superposition lifetimes, we recently conducted a study which employed a modular spin-free ligand scaffold to place a spin-laden propyl moiety at a series of fixed distances from an S = 1 / 2 vanadium(IV) ion in a series of vanadyl complexes. We found that, within a radius of 4.0(4)-6.6(6) Å from the metal center, nuclei did not contribute to decoherence. To assess the generality of this important design principle and test its efficacy in a different coordination geometry, we synthesized and investigated three vanadium tris(dithiolene) complexes with the same ligand set employed in our previous study: K 2 [V(C 5 H 6 S 4 ) 3 ] (1), K 2 [V(C 7 H 6 S 6 ) 3 ] (2), and K 2 [V(C 9 H 6 S 8 ) 3 ] (3). We specifically interrogated solutions of these complexes in DMF-d 7 /toluene-d 8 with pulsed electron paramagnetic resonance spectroscopy and electron nuclear double resonance spectroscopy and found that the distance dependence present in the previously synthesized vanadyl complexes holds true in this series. We further examined the coherence properties of the series in a different solvent, MeCN-d 3 /toluene-d 8 , and found that an additional property, the charge density of the complex, also affects decoherence across the series. These results highlight a previously unknown design principle for augmenting T 2 and open new pathways for the rational synthesis of complexes with long coherence times.

Novel Substrate-Based Inhibitors of Human Glutamate Carboxypeptidase II with Enhanced Lipophilicity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plechanovová, Anna; Byun, Youngjoo; Alquicer, Glenda

2012-10-09

Virtually all low molecular weight inhibitors of human glutamate carboxypeptidase II (GCPII) are highly polar compounds that have limited use in settings where more lipophilic molecules are desired. Here we report the identification and characterization of GCPII inhibitors with enhanced liphophilicity that are derived from a series of newly identified dipeptidic GCPII substrates featuring nonpolar aliphatic side chains at the C-terminus. To analyze the interactions governing the substrate recognition by GCPII, we determined crystal structures of the inactive GCPII(E424A) mutant in complex with selected dipeptides and complemented the structural data with quantum mechanics/molecular mechanics calculations. Results reveal the importance ofmore » nonpolar interactions governing GCPII affinity toward novel substrates as well as formerly unnoticed plasticity of the S1' specificity pocket. On the basis of those data, we designed, synthesized, and evaluated a series of novel GCPII inhibitors with enhanced lipophilicity, with the best candidates having low nanomolar inhibition constants and clogD > -0.3. Our findings offer new insights into the design of more lipophilic inhibitors targeting GCPII.« less

Assay Design Affects the Interpretation of T-Cell Receptor Gamma Gene Rearrangements

PubMed Central

Cushman-Vokoun, Allison M.; Connealy, Solomon; Greiner, Timothy C.

2010-01-01

Interpretation of capillary electrophoresis results derived from multiplexed fluorochrome-labeled primer sets can be complicated by small peaks, which may be incorrectly interpreted as clonal T-cell receptor-γ gene rearrangements. In this report, different assay designs were used to illustrate how design may adversely affect specificity. Ten clinical cases, with subclonal peaks containing one of the two infrequently used joining genes, were identified with a tri-color, one-tube assay. The DNA was amplified with the same NED fluorochrome on all three joining primers, first combined (one-color assay) and then amplified separately using a single NED-labeled joining primer. The single primer assay design shows how insignificant peaks could easily be wrongly interpreted as clonal T-cell receptor-γ gene rearrangements. Next, the performance of the one-tube assay was compared with the two-tube BIOMED-2-based TCRG Gene Clonality Assay in a series of 44 cases. Whereas sensitivity was similar between the two methods (92.9% vs. 96.4%; P = 0.55), specificity was significantly less in the BIOMED-2 assay (87.5% vs. 56.3%; P = 0.049) when a 2× ratio was used to define clonality. Specificity was improved to 81.3% by the use of a 5× peak height ratio (P = 0.626). These findings illustrate how extra caution is needed in interpreting a design with multiple, separate distributions, which is more difficult to interpret than a single distribution assay. PMID:20959612

Design, Synthesis, and Evaluation of Novel p-(methylthio)styryl Substituted Quindoline Derivatives as Neuroblastoma RAS (NRAS) Repressors via Specific Stabilizing the RNA G-Quadruplex.

PubMed

Peng, Wang; Sun, Zhi-Yin; Zhang, Qi; Cheng, Sui-Qi; Wang, Shi-Ke; Wang, Xiao-Na; Kuang, Guo-Tao; Su, Xiao-Xuan; Tan, Jia-Heng; Huang, Zhi-Shu; Ou, Tian-Miao

2018-05-25

The human proto-oncogene neuroblastoma RAS (NRAS) contains a guanine-rich sequence in the 5'-untranslated regions (5'-UTR) of the mRNA that could form an RNA G-quadruplex structure. This structure acts as a repressor for NRAS translation and could be a potential target for anti-cancer drugs. Our previous studies found an effective scaffold, the quindoline scaffold, for binding and stabilizing the DNA G-quadruplex structures. Here, basing on the previous studies and reported RNA-specific probes, a series of novel p-(methylthio)styryl substituted quindoline (MSQ) derivatives were designed, synthesized and evaluated as NRAS RNA G-quadruplex ligands. Panels of experiments turned out that the introduction of p-(methylthio)styryl side chain could enhance the specific binding to the NRAS RNA G-quadruplex. One of the hits, 4a-10, showed strong stabilizing activity on the G-quadruplex, and subsequently repressed NRAS's translation and inhibited tumor cells proliferation. Our finding provided a novel strategy to discover novel NRAS repressors by specifically binding to the RNA G-quadruplex in the 5'-UTR of mRNA.

Time series momentum and contrarian effects in the Chinese stock market

NASA Astrophysics Data System (ADS)

Shi, Huai-Long; Zhou, Wei-Xing

2017-10-01

This paper concentrates on the time series momentum or contrarian effects in the Chinese stock market. We evaluate the performance of the time series momentum strategy applied to major stock indices in mainland China and explore the relation between the performance of time series momentum strategies and some firm-specific characteristics. Our findings indicate that there is a time series momentum effect in the short run and a contrarian effect in the long run in the Chinese stock market. The performances of the time series momentum and contrarian strategies are highly dependent on the look-back and holding periods and firm-specific characteristics.

77 FR 50469 - Notice of Public Workshop: “Designing for Impact III: Workshop on Building the National Network...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-21

... series of public workshops entitled ``Designing for Impact: Workshop on Building the National Network for...-president-manufacturing-and-economy . The Designing for Impact workshop series is organized by the federal...: ``Designing for Impact III: Workshop on Building the National Network for Manufacturing Innovation'' AGENCY...

Molecular Design and Evaluation of Biodegradable Polymers Using a Statistical Approach

PubMed Central

Lewitus, Dan; Rios, Fabian; Rojas, Ramiro; Kohn, Joachim

2013-01-01

The challenging paradigm of bioresorbable polymers, whether in drug delivery or tissue engineering, states that a fine-tuning of the interplay between polymer properties (e.g., thermal, degradation), and the degree of cell/tissue replacement and remodeling is required. In this paper we describe how changes in the molecular architecture of a series of terpolymers allow for the design of polymers with varying glass transition temperatures and degradation rates. The effect of each component in the terpolymers is quantified via design of experiment (DoE) analysis. A linear relationship between terpolymer components and resulting Tg (ranging from 34 to 86 °C) was demonstrated. These findings were further supported with mass-per-flexible-bond (MPFB) analysis. The effect of terpolymer composition on the in vitro degradation of these polymers revealed molecular weight loss ranging from 20 to 60% within the first 24 hours. DoE modeling further illustrated the linear (but reciprocal) relationship between structure elements and degradation for these polymers. Thus, we describe a simple technique to provide insight into the structure property relationship of degradable polymers, specifically applied using a new family of tyrosine-derived polycarbonates, allowing for optimal design of materials for specific applications. PMID:23888354

What a Shock: No Apoptosis without Heat Shock Protein 90α | Center for Cancer Research

Cancer.gov

Apoptosis, also known as programmed cell death, consists of a series of reactions designed to systematically chop up a cell and its contents. The process is used to eliminate specific cells during development or to remove old or damaged cells without harming any surrounding cells. Since cancer cells can develop mechanisms to avoid apoptosis, researchers may be able to identify new targets to combat cancer by better understanding the details of the apoptotic process.

Building the National Information Infrastructure in K-12 Education: A Comprehensive Survey of Attitudes towards Linking Both Sides of the Desk. A Report of the Global Telecommunications Infrastructure Research Project. Research Report Series.

ERIC Educational Resources Information Center

Pereira, Francis; And Others

This survey was designed to elicit the perceptions of the members of the educational community on four issues concerning the NII (National Information Infrastructure), and to test whether these visions of the NII were shared by educators. The issues were: (1) the benefits of the NII to the education sector and specifically whether the NII will be…

X-Ray Spectroscopic Laboratory Experiments in Support of the X-Ray Astronomy Program

NASA Technical Reports Server (NTRS)

Kahn, Steven M.

1997-01-01

Our program is to perform a series of laboratory investigations designed to resolved significant atomic physics uncertainties that limit the interpretation of cosmic X-ray spectra. Specific goals include a quantitative characterization of Fe L-shell spectra; the development of new techniques to simulate Maxwellian plasmas using an Electron Beam Ion Trap (EBIT); and the measurement of dielectronic recombination rates for photoionized gas. New atomic calculations have also been carried out in parallel with the laboratory investigations.

Forced response of mistuned bladed disk assemblies

NASA Technical Reports Server (NTRS)

Watson, Brian C.; Kamat, Manohar P.; Murthy, Durbha V.

1993-01-01

A complete analytic model of mistuned bladed disk assemblies, designed to simulate the dynamical behavior of these systems, is analyzed. The model incorporates a generalized method for describing the mistuning of the assembly through the introduction of specific mistuning modes. The model is used to develop a computational bladed disk assembly model for a series of parametric studies. Results are presented demonstrating that the response amplitudes of bladed disk assemblies depend both on the excitation mode and on the mistune mode.

Fluoride-selective optical sensor based on the dipyrrolyl-tetrathiafulvalene chromophore.

PubMed

Rivadehi, Shadi; Reid, Ellen F; Hogan, Conor F; Bhosale, Sheshanath V; Langford, Steven J

2012-01-28

A chemosensor bearing dipyrrolyl motifs as recognition sites and a tetrathiafulvalene redox tag has been evaluated as an optical and redox sensor for a series of anions (F(-), Cl(-), Br(-), HSO(4)(-), CH(3)COO(-), and H(2)PO(4)(-)) in DCM solution. The receptor shows specific optical signaling for fluoride but little electrochemical effect in solution. The solid-state performance of the sensor leads to measurable changes in water. Design implications towards better systems based on these results and other examples are discussed.

Worker Requirements and Methods of Entry into Home and Community Occupations Related to Home Economics; Brief Descriptions of Specific Occupations Classified Into Six Clusters, Highlights of Areas of Work and Worker Trait Groups for Individual Occupations. Professional Education Series No. HE-7.

ERIC Educational Resources Information Center

O'Donnell, Beatrice

Descriptions of 200 occupations from the "Dictionary of Occupational Titles" Volume I designate the area of work and worker trait group and the reference page in Volume II of the Dictionary. Each occupational description briefly outlines highlights of work performed, worker requirements, and training and methods of entry. Occupations are…

Analysis and Evaluation of German Attainments and Research in the Liquid Rocket Engine Field. Volume 7. Thrust Control

DTIC Science & Technology

1951-01-01

by lowered cost, complexity, and flxed weight of the engine . An evaluation of the effect of throttling on specific impulse, as well as the way in... combustion chamber development. The throttling arrangement and the method of pump control are both closely with the design of the entire engine . As...the use of the rocket engine . For a complete coverage of these subjects, it is recommended that all volumes of this series be consulted

77 FR 19148 - Special Conditions: Airbus, A350-900 Series Airplane; Crew Rest Compartments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

...-900 series airplanes. These airplanes will have novel or unusual design features associated with two... standards for this design feature. These proposed special conditions contain the additional safety standards... for FAA type certification to June 28, 2009. The A350-900 series has a conventional layout with twin...

76 FR 62431 - Notice of Issuance of Final Determination Concerning Certain Ethernet Switches

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... importing 7 Series Ethernet switches assembled in China. The switches are designed to interconnect servers... country of origin of Arista's 7048, 7050, 7100, 7124, and 7500 series (``7 Series'') local area network..., packaged, and prepared for shipping. Arista's EOS TM (Extensible Operating System) software is designed to...

Preparing Instructional Designers for Game-Based Learning: Part III. Game Design as a Collaborative Process

ERIC Educational Resources Information Center

Hirumi, Atsusi; Appelman, Bob; Rieber, Lloyd; Van Eck, Richard

2010-01-01

In this three part series, four professors who teach graduate level courses on the design of instructional video games discuss their perspectives on preparing instructional designers to optimize game-based learning. Part I set the context for the series and one of four panelists discussed what he believes instructional designers should know about…

Graphical Data Analysis on the Circle: Wrap-Around Time Series Plots for (Interrupted) Time Series Designs.

PubMed

Rodgers, Joseph Lee; Beasley, William Howard; Schuelke, Matthew

2014-01-01

Many data structures, particularly time series data, are naturally seasonal, cyclical, or otherwise circular. Past graphical methods for time series have focused on linear plots. In this article, we move graphical analysis onto the circle. We focus on 2 particular methods, one old and one new. Rose diagrams are circular histograms and can be produced in several different forms using the RRose software system. In addition, we propose, develop, illustrate, and provide software support for a new circular graphical method, called Wrap-Around Time Series Plots (WATS Plots), which is a graphical method useful to support time series analyses in general but in particular in relation to interrupted time series designs. We illustrate the use of WATS Plots with an interrupted time series design evaluating the effect of the Oklahoma City bombing on birthrates in Oklahoma County during the 10 years surrounding the bombing of the Murrah Building in Oklahoma City. We compare WATS Plots with linear time series representations and overlay them with smoothing and error bands. Each method is shown to have advantages in relation to the other; in our example, the WATS Plots more clearly show the existence and effect size of the fertility differential.

WindPACT Reference Wind Turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dykes, Katherine L; Rinker, Jennifer

To fully understand how loads and turbine cost scale with turbine size, it is necessary to have identical turbine models that have been scaled to different rated powers. The report presents the WindPACT baseline models, which are a series of four baseline models that were designed to facilitate investigations into the scalings of loads and turbine cost with size. The models have four different rated powers (750 kW, 1.5 MW, 3.0 MW, and 5.0 MW), and each model was designed to its specified rated power using the same design methodology. The models were originally implemented in FAST_AD, the predecessor tomore » NREL's open-source wind turbine simulator FAST, but have yet to be implemented in FAST. This report contains the specifications for all four WindPACT baseline models - including structural, aerodynamic, and control specifications - along with the inherent assumptions and equations that were used to calculate the model parameters. It is hoped that these baseline models will serve as extremely useful resources for investigations into the scalings of costs, loads, or optimization routines.« less

Defining the RNA Internal Loops Preferred by Benzimidazole Derivatives via Two-Dimensional Combinatorial Screening and Computational Analysis

PubMed Central

Velagapudi, Sai Pradeep; Seedhouse, Steven J.; French, Jonathan

2011-01-01

RNA is an important therapeutic target, however, RNA targets are generally underexploited due to a lack of understanding of the small molecules that bind RNA and the RNA motifs that bind small molecules. Herein, we describe the identification of the RNA internal loops derived from a 4096-member 3×3 nucleotide loop library that are the most specific and highest affinity binders to a series of four designer, drug-like benzimidazoles. These studies establish a potentially general protocol to define the highest affinity and most specific RNA motif targets for heterocyclic small molecules. Such information could be used to target functionally important RNAs in genomic sequence. PMID:21604752

Series: The research agenda for general practice/family medicine and primary health care in Europe. Part 4. Results: specific problem solving skills.

PubMed

Hummers-Pradier, Eva; Beyer, Martin; Chevallier, Patrick; Eilat-Tsanani, Sophia; Lionis, Christos; Peremans, Lieve; Petek, Davorina; Rurik, Imre; Soler, Jean Karl; Stoffers, Henri Ejh; Topsever, Pinar; Ungan, Mehmet; van Royen, Paul

2010-09-01

The 'Research Agenda for General Practice/Family Medicine and Primary Health Care in Europe' summarizes the evidence relating to the core competencies and characteristics of the Wonca Europe definition of GP/FM, and its implications for general practitioners/family doctors, researchers and policy makers. The European Journal of General Practice publishes a series of articles based on this document. The previous articles presented background, objectives, and methodology, as well results on 'primary care management' and 'community orientation' and the person-related core competencies of GP/FM. This article reflects on the general practitioner's 'specific problem solving skills'. These include decision making on diagnosis and therapy of specific diseases, accounting for the properties of primary care, but also research questions related to quality management and resource use, shared decision making, or professional education and development. Clinical research covers most specific diseases, but often lacks pragmatism and primary care relevance. Quality management is a stronghold of GP/FM research. Educational interventions can be effective when well designed for a specific setting and situation. However, their message that 'usual care' by general practitioners is insufficient may be problematic. GP and their patients need more research into diagnostic reasoning with a step-wise approach to increase predictive values in a setting characterized by uncertainty and low prevalence of specific diseases. Pragmatic comparative effectiveness studies of new and established drugs or non-pharmaceutical therapy are needed. Multi-morbidity and complexity should be addressed. Studies on therapy, communication strategies and educational interventions should consider impact on health and sustainability of effects.

Design of a photovoltaic system for a southwest all-electric residence

NASA Astrophysics Data System (ADS)

Mehalick, E. M.; Obrien, G.; Tully, G. F.; Johnson, J.; Parker, J.

1980-04-01

The grid connected residential photovoltaic system for the Southwest is designed to meet both space conditioning requirements and all conventional electrical load requirements for an all-electric residence. The system is comprised of two major subsystems, the solar array and the power conditioning subsystem (PCS). An 8 kW peak photovoltaic array been designed for the house. The 93 square meters solar array uses a shingle solar cell module in a highly redundant series/parallel matrix. The photovoltaic generated power is supplied to a 10kVA power conversion subsystem which is controlled to track the solar array maximum power operating point and feed the 240 Vac output power directly to the house loads or back to the utility when excess power is generated. The photovoltaic power is isolated from the utility by a 15 kVA transformer. The house design and subsystem specifications are given in detail.

Investigation of aerodynamic characteristics of subsonic wings

NASA Technical Reports Server (NTRS)

Dejarnette, F. R.; Frink, N. T.

1979-01-01

An analytical strake design procedure is investigated. A numerical solution to the governing strake design equation is used to generate a series of strakes which are tested in a water tunnel to study their vortex breakdown characteristics. The strakes are scaled for use on a half-scale model of the NASA-LaRC general research fuselage with a 44 degrees trapezoidal wing. An analytical solution to the governing design equation is obtained. The strake design procedure relates the potential-flow leading-edge suction and pressure distributions to vortex stability. Several suction distributions are studied and those which are more triangular and peak near the tip generate strakes that reach higher angles of attack before vortex breakdown occurs at the wing trailing edge. For the same suction distribution, a conical rather than three dimensional pressure specification results in a better strake shape as judged from its vortex breakdown characteristics.

Challenges of developing an electro-optical system for measuring man's operational envelope

NASA Technical Reports Server (NTRS)

Woolford, B.

1985-01-01

In designing work stations and restraint systems, and in planning tasks to be performed in space, a knowledge of the capabilities of the operator is essential. Answers to such questions as whether a specific control or work surface can be reached from a given restraint and how much force can be applied are of particular interest. A computer-aided design system has been developed for designing and evaluating work stations, etc., and the Anthropometric Measurement Laboratory (AML) has been charged with obtaining the data to be used in design and modeling. Traditional methods of measuring reach and force are very labor intensive and require bulky equipment. The AML has developed a series of electro-optical devices for collecting reach data easily, in computer readable form, with portable systems. The systems developed, their use, and data collected with them are described.

Are Biophilic-Designed Site Office Buildings Linked to Health Benefits and High Performing Occupants?

PubMed Central

Gray, Tonia; Birrell, Carol

2014-01-01

This paper discusses the first phase of a longitudinal study underway in Australia to ascertain the broad health benefits of specific types of biophilic design for workers in a building site office. A bespoke site design was formulated to include open plan workspace, natural lighting, ventilation, significant plants, prospect and views, recycled materials and use of non-synthetic materials. Initial data in the first three months was gathered from a series of demographic questions and from interviews and observations of site workers. Preliminary data indicates a strong positive effect from incorporating aspects of biophilic design to boost productivity, ameliorate stress, enhance well-being, foster a collaborative work environment and promote workplace satisfaction, thus contributing towards a high performance workspace. The longitudinal study spanning over two years will track human-plant interactions in a biophilic influenced space, whilst also assessing the concomitant cognitive, social, psychological and physical health benefits for workers. PMID:25431874

A functional gene array for detection of bacterial virulence elements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jaing, C

2007-11-01

We report our development of the first of a series of microarrays designed to detect pathogens with known mechanisms of virulence and antibiotic resistance. By targeting virulence gene families as well as genes unique to specific biothreat agents, these arrays will provide important data about the pathogenic potential and drug resistance profiles of unknown organisms in environmental samples. To validate our approach, we developed a first generation array targeting genes from Escherichia coli strains K12 and CFT073, Enterococcus faecalis and Staphylococcus aureus. We determined optimal probe design parameters for microorganism detection and discrimination, measured the required target concentration, and assessedmore » tolerance for mismatches between probe and target sequences. Mismatch tolerance is a priority for this application, due to DNA sequence variability among members of gene families. Arrays were created using the NimbleGen Maskless Array Synthesizer at Lawrence Livermore National Laboratory. Purified genomic DNA from combinations of one or more of the four target organisms, pure cultures of four related organisms, and environmental aerosol samples with spiked-in genomic DNA were hybridized to the arrays. Based on the success of this prototype, we plan to design further arrays in this series, with the goal of detecting all known virulence and antibiotic resistance gene families in a greatly expanded set of organisms.« less

Human Mars Lander Design for NASA's Evolvable Mars Campaign

NASA Technical Reports Server (NTRS)

Polsgrove, Tara; Chapman, Jack; Sutherlin, Steve; Taylor, Brian; Fabisinski, Leo; Collins, Tim; Cianciolo Dwyer, Alicia; Samareh, Jamshid; Robertson, Ed; Studak, Bill;

76 FR 41491 - Applications for New Awards; Arts in Education National Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-14

... the arts as a core academic subject in the school curriculum. Interrupted time series design means a... interrupted time series design that relies on the comparison of treatment effects on a single subject or group.... That is, the series should show an ``interruption'' of the prior situation at the time when the program...

Temporal relationships between awakening cortisol and psychosocial variables in inpatients with anorexia nervosa - A time series approach.

PubMed

Wild, Beate; Stadnitski, Tatjana; Wesche, Daniela; Stroe-Kunold, Esther; Schultz, Jobst-Hendrik; Rudofsky, Gottfried; Maser-Gluth, Christiane; Herzog, Wolfgang; Friederich, Hans-Christoph

2016-04-01

The aim of the study was to investigate the characteristics of the awakening salivary cortisol in patients with anorexia nervosa (AN) using a time series design. We included ten AN inpatients, six with a very low BMI (high symptom severity, HSS group) and four patients with less severe symptoms (low symptom severity, LSS group). Patients collected salivary cortisol daily upon awakening. The number of collected saliva samples varied across patients between n=65 and n=229 (due to the different lengths of their inpatient stay). In addition, before retiring, the patients answered questions daily on the handheld regarding disorder-related psychosocial variables. The analysis of cortisol and diary data was conducted by using a time series approach. Time series showed that the awakening cortisol of the AN patients was elevated as compared to a control group. Cortisol measurements of patients with LSS essentially fluctuated in a stationary manner around a constant mean. The series of patients with HSS were generally less stable; four HSS patients showed a non-stationary cortisol awakening series. Antipsychotic medication did not change awakening cortisol in a specific way. The lagged dependencies between cortisol and depressive feelings became significant for four patients. Here, higher cortisol values were temporally associated with higher values of depressive feelings. Upon awakening, the cortisol of all AN patients was in the standard range but elevated as compared to healthy controls. Patients with HSS appeared to show less stable awakening cortisol time series compared to patients with LSS. Copyright © 2016 Elsevier B.V. All rights reserved.

Using Time-Series Research Designs to Investigate the Effects of Instruction on SLA.

ERIC Educational Resources Information Center

Mellow, J. Dean; And Others

1996-01-01

Argues that the study of second-language acquisition theory can be enhanced through time-series research designs. Within the context of investigating the effects of second-language instruction, four main reasons for using T-S design are identified. (95 references) (Author/CK)

78 FR 69885 - AIM Growth Series (Invesco Growth Series), et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

... designed to ensure that Sub-Advisors comply with a Subadvised Series' investment objective, policies and...] AIM Growth Series (Invesco Growth Series), et al.; Notice of Application November 15, 2013. AGENCY... approval and would grant relief from certain disclosure requirements. APPLICANTS: AIM Growth Series...

76 FR 6646 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing of Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-07

... Series, adjusted option series and any options series until the time to expiration for such series is... time to expiration for such series is less than nine months be treated differently. Specifically, under... series until the time to expiration for such series is less than nine months. Accordingly, the...

Rheumatoid Arthritis Educational Video Series

MedlinePlus Videos and Cool Tools

... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos was designed to help you learn more about Rheumatoid Arthritis (RA). You will learn how the diagnosis of ...

Probing the Hofmeister series beyond water: Specific-ion effects in non-aqueous solvents

NASA Astrophysics Data System (ADS)

Mazzini, Virginia; Liu, Guangming; Craig, Vincent S. J.

2018-06-01

We present an experimental investigation of specific-ion effects in non-aqueous solvents, with the aim of elucidating the role of the solvent in perturbing the fundamental ion-specific trend. The focus is on the anions: CH3COO->F->Cl->Br->I->ClO4 ->SCN- in the solvents water, methanol, formamide, dimethyl sulfoxide (DMSO), and propylene carbonate (PC). Two types of experiments are presented. The first experiment employs the technique of size exclusion chromatography to evaluate the elution times of electrolytes in the different solvents. We observe that the fundamental (Hofmeister) series is observed in water and methanol, whilst the series is reversed in DMSO and PC. No clear series is observed for formamide. The second experiment uses the quartz crystal microbalance technique to follow the ion-induced swelling and collapse of a polyelectrolyte brush. Here the fundamental series is observed in the protic solvents water, methanol, and formamide, and the series is once again reversed in DMSO and PC. These behaviours are not attributed to the protic/aprotic nature of the solvents, but rather to the polarisability of the solvents and are due to the competition between the interaction of ions with the solvent and the surface. A rule of thumb is proposed for ion specificity in non-aqueous solvents. In weakly polarisable solvents, the trends in specific-ion effects will follow those in water, whereas in strongly polarisable solvents the reverse trend will be observed. Solvents of intermediate polarisability will give weak specific-ion effects.

Probing the Hofmeister series beyond water: Specific-ion effects in non-aqueous solvents.

PubMed

Mazzini, Virginia; Liu, Guangming; Craig, Vincent S J

2018-06-14

We present an experimental investigation of specific-ion effects in non-aqueous solvents, with the aim of elucidating the role of the solvent in perturbing the fundamental ion-specific trend. The focus is on the anions: CH 3 COO - >F - >Cl - >Br - >I - >ClO 4 - >SCN - in the solvents water, methanol, formamide, dimethyl sulfoxide (DMSO), and propylene carbonate (PC). Two types of experiments are presented. The first experiment employs the technique of size exclusion chromatography to evaluate the elution times of electrolytes in the different solvents. We observe that the fundamental (Hofmeister) series is observed in water and methanol, whilst the series is reversed in DMSO and PC. No clear series is observed for formamide. The second experiment uses the quartz crystal microbalance technique to follow the ion-induced swelling and collapse of a polyelectrolyte brush. Here the fundamental series is observed in the protic solvents water, methanol, and formamide, and the series is once again reversed in DMSO and PC. These behaviours are not attributed to the protic/aprotic nature of the solvents, but rather to the polarisability of the solvents and are due to the competition between the interaction of ions with the solvent and the surface. A rule of thumb is proposed for ion specificity in non-aqueous solvents. In weakly polarisable solvents, the trends in specific-ion effects will follow those in water, whereas in strongly polarisable solvents the reverse trend will be observed. Solvents of intermediate polarisability will give weak specific-ion effects.

Analysis and stochastic modelling of Intensity-Duration-Frequency relationship from 88 years of 10 min rainfall data in North Spain

NASA Astrophysics Data System (ADS)

Delgado, Oihane; Campo-Bescós, Miguel A.; López, J. Javier

2017-04-01

Frequently, when we are trying to solve certain hydrological engineering problems, it is often necessary to know rain intensity values related to a specific probability or return period, T. Based on analyses of extreme rainfall events at different time scale aggregation, we can deduce the relationships among Intensity-Duration-Frequency (IDF), that are widely used in hydraulic infrastructure design. However, the lack of long time series of rainfall intensities for smaller time periods, minutes or hours, leads to use mathematical expressions to characterize and extend these curves. One way to deduce them is through the development of synthetic rainfall time series generated from stochastic models, which is evaluated in this work. From recorded accumulated rainfall time series every 10 min in the pluviograph of Igueldo (San Sebastian, Spain) for the time period between 1927-2005, their homogeneity has been checked and possible statistically significant increasing or decreasing trends have also been shown. Subsequently, two models have been calibrated: Bartlett-Lewis and Markov chains models, which are based on the successions of storms, composed for a series of rainfall events, separated by a short interval of time each. Finally, synthetic ten-minute rainfall time series are generated, which allow to estimate detailed IDF curves and compare them with the estimated IDF based on the recorded data.

Man-machine Integration Design and Analysis System (MIDAS) Task Loading Model (TLM) experimental and software detailed design report

NASA Technical Reports Server (NTRS)

Staveland, Lowell

1994-01-01

This is the experimental and software detailed design report for the prototype task loading model (TLM) developed as part of the man-machine integration design and analysis system (MIDAS), as implemented and tested in phase 6 of the Army-NASA Aircrew/Aircraft Integration (A3I) Program. The A3I program is an exploratory development effort to advance the capabilities and use of computational representations of human performance and behavior in the design, synthesis, and analysis of manned systems. The MIDAS TLM computationally models the demands designs impose on operators to aide engineers in the conceptual design of aircraft crewstations. This report describes TLM and the results of a series of experiments which were run this phase to test its capabilities as a predictive task demand modeling tool. Specifically, it includes discussions of: the inputs and outputs of TLM, the theories underlying it, the results of the test experiments, the use of the TLM as both stand alone tool and part of a complete human operator simulation, and a brief introduction to the TLM software design.

Earth Observatory Satellite system definition study. Report 5: System design and specifications. Volume 1: Baseline system description

NASA Technical Reports Server (NTRS)

1974-01-01

A system baseline design oriented to the requirements of the next generation of Earth Observatory Satellite missions is presented. The first mission (EOS-A) is envisioned as a two-fold mission which (1) provides a continuum of data of the type being supplied by ERTS for the emerging operational applications and also (2) expands the research and development activities for future instrumentation and analysis techniques. The baseline system specifically satisfies the requirements of this first mission. However, EOS-A is expected to be the first of a series of earth observation missions. Thus the baseline design has been developed so as to accommodate these latter missions effectively as the transition is made from conventional, expendable launch vehicles and spacecraft to the Shuttle Space Transportation System era. Further, a subset of alternative missions requirements including Seasat, SEOS, SMM and MSS-5 have been analyzed to verify that the spacecraft design to serve a multi-mission role is economically sound. A key feature of the baseline system design is the concept of a modular observatory system whose elements are compatible with varying levels of launch vehicle capability. The design configuration can be used with either the Delta or Titan launch vehicles and will adapt readily to the space shuttle when that system becomes available in the early 1980's.

Mesoscale fabrication and design

NASA Astrophysics Data System (ADS)

Hayes, Gregory R.

A strong link between mechanical engineering design and materials science and engineering fabrication can facilitate an effective and adaptable prototyping process. In this dissertation, new developments in the lost mold-rapid infiltration forming (LM-RIF) process is presented which demonstrates the relationship between these two fields of engineering in the context of two device applications. Within the LM-RIF process, changes in materials processing and mechanical design are updated iteratively, often aided by statistical design of experiments (DOE). The LM-RIF process was originally developed by Antolino and Hayes et al to fabricate mesoscale components. In this dissertation the focus is on advancements in the process and underlying science. The presented advancements to the LM-RIF process include an augmented lithography procedure, the incorporation of engineered aqueous and non-aqueous colloidal suspensions, an assessment of constrained drying forces during LM-RIF processing, mechanical property evaluation, and finally prototype testing and validation. Specifically, the molding procedure within the LM-RIF process is capable of producing molds with thickness upwards of 1mm, as well as multi-layering to create three dimensional structures. Increasing the mold thickness leads to an increase in the smallest feature resolvable; however, the increase in mold thickness and three dimensional capability has expanded the mechanical design space. Tetragonally stabilized zirconia (3Y-TZP) is an ideal material for mesoscale instruments, as it is biocompatible, exhibits high strength, and is chemically stable. In this work, aqueous colloidal suspensions were formulated with two new gel-binder systems, increasing final natural orifice translumenal endoscopic surgery (NOTES) instrument yield from 0% to upwards of 40% in the best case scenario. The effects of the gel-binder system on the rheological behavior of the suspension along with the thermal characteristics of the gel-binder system were characterized. Finally, mechanical properties of ceramic specimens were obtained via 3-point bend testing. Another candidate material for NOTES devices as well as cellular contact aided compliant mechanisms (C3M) devices is 300 series stainless steel (300 series stainless steel). 300 series stainless steel is a common biocompatible material; it is used in surgical applications, exhibits a high corrosion resistance, and has high strength to failure. New, high solids loading, non-aqueous colloidal suspensions of 300 series stainless steel were formulated and incorporated into the LM-RIF process. The rheological behavior and thermal characteristics of the non-aqueous colloidal suspensions were analyzed and engineered to operate within the LM-RIF process. Final part yield with the non-aqueous colloidal suspensions was higher than that of the aqueous ceramic suspensions. Mechanical properties of 300 series stainless steel specimens were determined via 3-point bend testing. Furthermore, new composite non-aqueous colloidal suspensions of 3Y-TZP and 300 series stainless steel were formulated and incorporated into the LM-RIF process. The composite materials showed an increase in final part yield, and an increase in yield strength compared to pure 300 series stainless steel was determined by Vickers hardness testing. The successful incorporation of composite suspensions in the LM-RIF process was facilitated through an analysis of the rheological behavior as a function of solids loading and ceramic to metal ratio. Optimized designs of NOTES instruments, as well as C3M devices were manufactured using the LM-RIF process with the non-aqueous 300 series stainless steel suspension. The performance of the prototype NOTES instruments was evaluated and compared against the theoretically predicted performance results, showing good agreement. Similarly, good agreement was seen between the stress-displacement behavior of prototype C3M devices when compared to the theoretically calculated stress-displacement results. Finally, in a comparison by endoscopic surgeons at Hershey Medical Center between an existing industry standard endoscopic device and the mesoscale instrument prototypes fabricated via the LM-RIF process, the prototype design performed favorably in almost all categories. (Abstract shortened by UMI.)

Construct-a-Glove. Science by Design Series.

ERIC Educational Resources Information Center

Pulis, Lee

This book is one of four books in the Science-by-Design Series created by TERC and funded by the National Science Foundation (NSF). It offers high school students a challenging, hands-on opportunity to compare the function and design of many types of handwear from a hockey mitt to a surgical glove, and design and test a glove to their own…

77 FR 64023 - Special Conditions: Airbus Model A318, A319, A320, and A321 Series Airplanes; Design Roll...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-18

... airplanes with modification 160023 (Sharklet). These airplanes will have novel or unusual design features..., A320, and A321 series airplanes because of a novel or unusual design feature, special conditions are... model that incorporates the same novel or unusual design feature, or should any other model already...

AMTEC radioisotope power system for the Pluto Express mission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ivanenok, J.F. III; Sievers, R.K.

1995-12-31

The Alkali Metal Thermal to Electric Converter (AMTEC) technology has made substantial advances in the last 3 years through design improvements and technical innovations. In 1993 programs began to produce an AMTEC cell specifically for the NASA Pluto Express Mission. A set of efficiency goals was established for this series of cells to be developed. According to this plan, cell {number_sign}8 would be 17% efficient but was actually 18% efficient. Achieving this goal, as well as design advances that allow the cell to be compact, has resulted in pushing the cell from an unexciting 2 W/kg and 2% efficiency tomore » very attractive 40 W/kg and 18% measured efficiency. This paper will describe the design and predict the performance of a radioisotope powered AMTEC system for the Pluto Express mission.« less

Multiple Indicator Stationary Time Series Models.

ERIC Educational Resources Information Center

Sivo, Stephen A.

2001-01-01

Discusses the propriety and practical advantages of specifying multivariate time series models in the context of structural equation modeling for time series and longitudinal panel data. For time series data, the multiple indicator model specification improves on classical time series analysis. For panel data, the multiple indicator model…

Part 2 of a 4-part series Hair Products: Trends and Alternatives

PubMed Central

Jacob, Sharon; Katta, Rajani; Nedorost, Susan; Warshaw, Erin; Zirwas, Matt; Bhinder, Manpreet

2011-01-01

Objective: To provide updated data on usage of ingredients that are common potential contact allergens in several categories of hair products. To identify useful alternative products with few or no common contact allergens. Design: In November 2009, the full ingredient lists of 5,416 skin, hair, and cosmetic products marketed by the CVS pharmacy chain was copied from CVS.com into Microsoft Word format for analysis. Computer searches were made in Microsoft Word using search/replace and sorting functions to accurately identify the presence of specific allergens in each website product. Measurements: Percentages of American Contact Dermatitis Society core series allergens (and other common preservatives and sunblocks) were calculated. Results: The usage of American Contact Dermatitis Society core series allergens (and other preservatives and sunblocks) in hair products is reported. Conclusion: Data on allergens and alternatives for hair products is not widely published. This article reviews some of the common potential allergens in hair products, including shampoos, conditioners, and styling products. Suitable available alternative products for patients with contact allergy are listed. PMID:21779419

Clinical Decision Making in the Management of Patients With Cervicogenic Dizziness: A Case Series.

PubMed

Jung, Francis C; Mathew, Sherin; Littmann, Andrew E; MacDonald, Cameron W

2017-11-01

Study Design Case series. Background Although growing recognition of cervicogenic dizziness (CGD) is emerging, there is still no gold standard for the diagnosis of CGD. The purpose of this case series is to describe the clinical decision making utilized in the management of 7 patients presenting with CGD. Case Description Patients presenting with neck pain and accompanying subjective symptoms, including dizziness, unsteadiness, light-headedness, and visual disturbance, were selected. Clinical evidence of a temporal relationship between neck pain and dizziness, with or without sensorimotor disturbances, was assessed. Clinical decision making followed a 4-step process, informed by the current available best evidence. Outcome measures included the numeric rating scale for dizziness and neck pain, the Dizziness Handicap Inventory, Patient-Specific Functional Scale, and global rating of change. Outcomes Seven patients (mean age, 57 years; range, 31-86 years; 7 female) completed physical therapy management at an average of 13 sessions (range, 8-30 sessions) over a mean of 7 weeks. Clinically meaningful improvements were observed in the numeric rating scale for dizziness (mean difference, 5.7; 95% confidence interval [CI]: 4.0, 7.5), neck pain (mean difference, 5.4; 95% CI: 3.8, 7.1), and the Dizziness Handicap Inventory (mean difference, 32.6; 95% CI: 12.9, 52.2) at discontinuation. Patients also demonstrated overall satisfaction via the Patient-Specific Functional Scale (mean difference, 9) and global rating of change (mean, +6). Discussion This case series describes the physical therapist decision making, management, and outcomes in patients with CGD. Further investigation is warranted to develop a valid clinical decision-making guideline to inform management of patients with CGD. Level of Evidence Diagnosis, therapy, level 4. J Orthop Sports Phys Ther 2017;47(11):874-884. Epub 9 Oct 2017. doi:10.2519/jospt.2017.7425.

High performance TWT development for the microwave power module

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whaley, D.R.; Armstrong, C.M.; Groshart, G.

1996-12-31

Northrop Grumman`s ongoing development of microwave power modules (MPM) provides microwave power at various power levels, frequencies, and bandwidths for a variety of applications. Present day requirements for the vacuum power booster traveling wave tubes of the microwave power module are becoming increasingly more demanding, necessitating the need for further enhancement of tube performance. The MPM development program at Northrop Grumman is designed specifically to meet this need by construction and test of a series of new tubes aimed at verifying computation and reaching high efficiency design goals. Tubes under test incorporate several different helix designs, as well as varyingmore » electron gun and magnetic confinement configurations. Current efforts also include further development of state-of-the-art TWT modeling and computational methods at Northrop Grumman incorporating new, more accurate models into existing design tools and developing new tools to be used in all aspects of traveling wave tube design. Current status of the Northrop Grumman MPM TWT development program will be presented.« less

Simulation of financial market via nonlinear Ising model

NASA Astrophysics Data System (ADS)

Ko, Bonggyun; Song, Jae Wook; Chang, Woojin

2016-09-01

In this research, we propose a practical method for simulating the financial return series whose distribution has a specific heaviness. We employ the Ising model for generating financial return series to be analogous to those of the real series. The similarity between real financial return series and simulated one is statistically verified based on their stylized facts including the power law behavior of tail distribution. We also suggest the scheme for setting the parameters in order to simulate the financial return series with specific tail behavior. The simulation method introduced in this paper is expected to be applied to the other financial products whose price return distribution is fat-tailed.

78 FR 39023 - ING Investments, LLC, et al.;

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-28

... portion of a Sub- Advised Series' assets, and (c) implement procedures reasonably designed to ensure that..., ING Series Fund, Inc., ING Strategic Allocation Portfolios, Inc., ING Variable Funds, ING Variable... Investment Company may offer one or more series of shares (each a ``Series'' and collectively, ``Series...

Nanotechnology: Small Matters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cynthia Needham

2008-06-30

The primary objective of this project was to engage members of the public in an active and balanced deliberative discussion about the social, ethical, legal, environmental, and policy issues arising from nanotechnologies. A second but equally important objective was to interest members of the public in learning more about science and technology and nanotechnology specifically by understanding how it will affect their lives. The objectives were met through a series of electronic and face-to-face citizen forums conducted in conjunction with three Fred Friendly Seminars being taped on the University of California, Berkeley campus in partnership with Lawrence Hall of Sciencemore » (this forum was conducted in partnership with the St. Louis Science Center); the Boston Museum of Science in Boston, MA; and the State Museum of South Carolina in Columbia, South Carolina. The topical area for each forum paralleled the content of the Fred Friendly Seminars series being taped at each location, but specific topics/issues were drawn from the concerns and interests of the communities. The three topical areas included Environmental Impact (St. Louis), Privacy vs. Security (Boston), and Health and Enhancement (Columbia). The PI and project leader worked with the local science centers to identify stakeholder groups, such as academic, corporate and government scientists; environmental advocates; business leaders; science and technology journalists; and public policy makers within each community. Representatives from each group along with members of the general public were invited to participate in a series of on line and in person deliberations that were designed to provide basic information about the science, its potential benefits and risks, and avenues for public participation in policy formulation. On line resources were designed and managed by ScienceVIEW at Lawrence Hall of Science and Earth & Sky, Inc. The activities at each site were evaluated by Inverness Research Associates to assess whether they have achieved the objectives.« less

Construct-a-Catapult. Science by Design Series.

ERIC Educational Resources Information Center

Pulis, Lee

This book is one of four books in the Science-by-Design Series crated by TERC and funded by the National Science Foundation (NSF). It integrates history, physics, mathematics, and technology in its challenge to high school students to design and build a working catapult system. Students investigate elasticity, projectile launching, and learn about…

Construct-a-Boat. Science by Design Series.

ERIC Educational Resources Information Center

Baroway, William

This book is one of four books in the Science-by-Design Series created by TERC and funded by the National Science Foundation (NSF). It challenges high school students to investigate the physics of boat performance and work with systems and modeling. Through research, design, testing, and evaluation of a model boat, students experience the…

The Design of Time-Series Comparisons under Resource Constraints.

ERIC Educational Resources Information Center

Willemain, Thomas R.; Hartunian, Nelson S.

1982-01-01

Two methods for dividing an interrupted time-series study between baseline and experimental phases when study resources are limited are compared. In fixed designs, the baseline duration is predetermined. In flexible designs the baseline duration is contingent on remaining resources and the match of results to prior expectations of the evaluator.…

Teacher Challenges to Implement Engineering Design in Secondary Technology Education

ERIC Educational Resources Information Center

Kelley, Todd R.; Wicklein, Robert C.

2009-01-01

This descriptive study examined the current status of technology education teacher practices with respect to engineering design. This article is the third article in a three-part series presenting the results of this study. The first article in the series titled "Examination of Engineering Design Curriculum Content" highlighted the research…

Cloud Computing for Mission Design and Operations

NASA Technical Reports Server (NTRS)

Arrieta, Juan; Attiyah, Amy; Beswick, Robert; Gerasimantos, Dimitrios

2012-01-01

The space mission design and operations community already recognizes the value of cloud computing and virtualization. However, natural and valid concerns, like security, privacy, up-time, and vendor lock-in, have prevented a more widespread and expedited adoption into official workflows. In the interest of alleviating these concerns, we propose a series of guidelines for internally deploying a resource-oriented hub of data and algorithms. These guidelines provide a roadmap for implementing an architecture inspired in the cloud computing model: associative, elastic, semantical, interconnected, and adaptive. The architecture can be summarized as exposing data and algorithms as resource-oriented Web services, coordinated via messaging, and running on virtual machines; it is simple, and based on widely adopted standards, protocols, and tools. The architecture may help reduce common sources of complexity intrinsic to data-driven, collaborative interactions and, most importantly, it may provide the means for teams and agencies to evaluate the cloud computing model in their specific context, with minimal infrastructure changes, and before committing to a specific cloud services provider.

76 FR 14111 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-15

... Options Series, adjusted option series and any options series until the time to expiration for such series... time to expiration for such series is less than nine months be treated differently. Specifically, under... until the time to expiration for such series is less than nine months. Accordingly, the requirement to...

Examining the Internal Validity and Statistical Precision of the Comparative Interrupted Time Series Design by Comparison with a Randomized Experiment

ERIC Educational Resources Information Center

St.Clair, Travis; Cook, Thomas D.; Hallberg, Kelly

2014-01-01

Although evaluators often use an interrupted time series (ITS) design to test hypotheses about program effects, there are few empirical tests of the design's validity. We take a randomized experiment on an educational topic and compare its effects to those from a comparative ITS (CITS) design that uses the same treatment group as the experiment…

76 FR 68675 - Revisions to the Export Administration Regulations (EAR): Control of Aircraft and Related Items...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

...(g) of the July 15 proposed rule) and all other 600 series items if, at the time of export, reexport... designed'' for a defense article would become subject to the new 600 series controls on the CCL as... the extent an item is ``specially designed'' for a military use, it is subject to a 600 series ECCN in...

Guaiac and immunochemical tests for faecal occult blood in colorectal cancer screening.

PubMed Central

Castiglione, G.; Grazzini, G.; Ciatto, S.

1992-01-01

Seven hundred and eighty-six subjects spontaneously referring to our Center performed two guaiac (Rehydrated Hemoccult II (R.HO), and Hemoccult Sensa (HO S.)), and two immunochemical (OC Hemodia (Hdia) and Hemeselect (Hsel)) faecal occult blood tests on three consecutive faecal determinations. The positivity rates of 3 day R.HO, HO S., Hdia, and Hsel were 4.8%, 5.6%, 8.4% and 11.2% respectively. One hundred and thirty-five of the 150 subjects with at least one positive test completed the diagnostic work-up. Cancer was detected in three subjects and adenomas in 15. Three-day specificity estimates of R.HO, HO S., Hdia and Hsel in the overall series were 96.1%, 96.0%, 93.8% and 91.2% respectively, the differences between guaiac and immunochemical tests being significant. Corresponding values of specificity as determined on the first faecal sample only in the overall series were 98.1%, 98.3%, 96.1% and 94.9% respectively. No significant difference in specificity is evident when 3-day guaiac tests are compared to 1-day immunochemical ones. Three-day immunochemical testing is not recommended for screening purposes due to its very low specificity. Nevertheless, 1-day immunochemical testing is almost as specific as 3-day guaiac testing. A preliminary estimate of colonic neoplasms detection rates shows no difference as well. The benefit of 1-day testing on screening acceptability is evident, but the impact on sensitivity should be evaluated in a screening situation with a proper study design and a larger sample size. PMID:1616868

The Efficiency of Split Panel Designs in an Analysis of Variance Model

PubMed Central

Wang, Wei-Guo; Liu, Hai-Jun

2016-01-01

We consider split panel design efficiency in analysis of variance models, that is, the determination of the cross-sections series optimal proportion in all samples, to minimize parametric best linear unbiased estimators of linear combination variances. An orthogonal matrix is constructed to obtain manageable expression of variances. On this basis, we derive a theorem for analyzing split panel design efficiency irrespective of interest and budget parameters. Additionally, relative estimator efficiency based on the split panel to an estimator based on a pure panel or a pure cross-section is present. The analysis shows that the gains from split panel can be quite substantial. We further consider the efficiency of split panel design, given a budget, and transform it to a constrained nonlinear integer programming. Specifically, an efficient algorithm is designed to solve the constrained nonlinear integer programming. Moreover, we combine one at time designs and factorial designs to illustrate the algorithm’s efficiency with an empirical example concerning monthly consumer expenditure on food in 1985, in the Netherlands, and the efficient ranges of the algorithm parameters are given to ensure a good solution. PMID:27163447

Analysis, operation and maintenance of a fuel cell/battery series-hybrid bus for urban transit applications

NASA Astrophysics Data System (ADS)

Bubna, Piyush; Brunner, Doug; Gangloff, John J.; Advani, Suresh G.; Prasad, Ajay K.

The fuel cell hybrid bus (FCHB) program was initiated at the University of Delaware in 2005 to demonstrate the viability of fuel cell vehicles for transit applications and to conduct research and development to facilitate the path towards their eventual commercialization. Unlike other fuel cell bus programs, the University of Delaware's FCHB design features a battery-heavy hybrid which offers multiple advantages in terms of cost, performance and durability. The current fuel cell hybrid bus is driven on a regular transit route at the University of Delaware. The paper describes the baseline specifications of the bus with a focus on the fuel cell and the balance of plant. The fuel cell/battery series-hybrid design is well suited for urban transit routes and provides key operational advantages such as hydrogen fuel economy, efficient use of the fuel cell for battery recharging, and regenerative braking. The bus is equipped with a variety of sensors including a custom-designed cell voltage monitoring system which provide a good understanding of bus performance under normal operation. Real-time data collection and analysis have yielded key insights for fuel cell bus design optimization. Results presented here illustrate the complex flow of energy within the various subsystems of the fuel cell hybrid bus. A description of maintenance events has been included to highlight the issues that arise during general operation. The paper also describes several modifications that will facilitate design improvements in future versions of the bus. Overall, the fuel cell hybrid bus demonstrates the viability of fuel cells for urban transit applications in real world conditions.

Partners in projects: preparing for public involvement in health and social care research.

PubMed

Parkes, Jacqueline H; Pyer, Michelle; Wray, Paula; Taylor, Jane

2014-09-01

In recent years, several UK and, international funders of health and social care related research have adopted the policy of requiring explicit evidence of the 'public' voice in all aspects of project design. For many academic researchers engaged within research, evaluations or audit projects, this formal requirement to actively engage members of the public will present them with both benefits and challenges to securing knowledgeable, skilled, and confident lay representation onto project teams. This could potentially lead to the exploitation of those individuals who are available, appropriately informed, and adequately prepared for such activities. Currently, much of the preparation of patients or members of the public for research involvement tends to be aligned to specific projects; however, with the call for greater active and meaningful involvement of lay representatives in future national and international funding applications, there is clearly a growing need to 'train' sufficient numbers of confident and competent representatives to meet this growing demand. This paper describes the development of a specifically designed research awareness training programme and underpinning theoretical model, which has been specifically designed to support active and meaningful lay involvement in research, evaluations and audit projects. Developed over a four year period, the course is a culmination of learning extracted from a series of four completed research projects, which have incorporated an element of public and patient involvement (PPI) training in their overall design. Crown Copyright © 2014. Published by Elsevier Ireland Ltd. All rights reserved.

A reliable algorithm for optimal control synthesis

NASA Technical Reports Server (NTRS)

Vansteenwyk, Brett; Ly, Uy-Loi

1992-01-01

In recent years, powerful design tools for linear time-invariant multivariable control systems have been developed based on direct parameter optimization. In this report, an algorithm for reliable optimal control synthesis using parameter optimization is presented. Specifically, a robust numerical algorithm is developed for the evaluation of the H(sup 2)-like cost functional and its gradients with respect to the controller design parameters. The method is specifically designed to handle defective degenerate systems and is based on the well-known Pade series approximation of the matrix exponential. Numerical test problems in control synthesis for simple mechanical systems and for a flexible structure with densely packed modes illustrate positively the reliability of this method when compared to a method based on diagonalization. Several types of cost functions have been considered: a cost function for robust control consisting of a linear combination of quadratic objectives for deterministic and random disturbances, and one representing an upper bound on the quadratic objective for worst case initial conditions. Finally, a framework for multivariable control synthesis has been developed combining the concept of closed-loop transfer recovery with numerical parameter optimization. The procedure enables designers to synthesize not only observer-based controllers but also controllers of arbitrary order and structure. Numerical design solutions rely heavily on the robust algorithm due to the high order of the synthesis model and the presence of near-overlapping modes. The design approach is successfully applied to the design of a high-bandwidth control system for a rotorcraft.

Design and Implementation of a Professional Development Course Series.

PubMed

Welch, Beth; Spooner, Joshua J; Tanzer, Kim; Dintzner, Matthew R

2017-12-01

Objective. To design and implement a longitudinal course series focused on professional development and professional identity formation in pharmacy students at Western New England University. Methods. A four-year, theme-based course series was designed to sequentially and longitudinally impart the values, attributes, and characteristics of a professional pharmacist. Requirements of the course include: goal planning and reflective assignments, submission of "Best Works," attendance at professional meetings, completion of service hours, annual completion of a Pharmacy Professionalism Instrument, attendance at Dean's Seminar, participation in roundtable discussions, and maintenance of an electronic portfolio. Though the Professional Development course series carries no credit, these courses are progression requirements and students are assessed on a pass/fail basis. Results. Course pass rates in the 2015-2016 academic year for all four classes were 99% to 100%, suggesting the majority of students take professional development seriously and are achieving the intended outcomes of the courses. Conclusion. A professional development course series was designed and implemented in the new Doctor of Pharmacy program at Western New England University to enhance the professional identity formation of students.

Catastrophic Failure Modes Assessment of the International Space Station Alpha

NASA Technical Reports Server (NTRS)

Lutz, B. E. P.; Goodwin, C. J.

1996-01-01

This report summarizes a series of analyses to quantify the hazardous effects of meteoroid/debris penetration of Space Station Alpha manned module protective structures. These analyses concentrate on determining (a) the critical crack length associated with six manned module pressure wall designs that, if exceeded, would lead to unstopped crack propagation and rupture of manned modules, and (b) the likelihood of crew or station loss following penetration of unsymmetrical di-methyl hydrazine tanks aboard the proposed Russian FGB ('Tug') propulsion module and critical elements aboard the control moment gyro module (SPP-1). Results from these quantified safety analyses are useful in improving specific design areas, thereby reducing the overall likelihood of crew or station loss following orbital debris penetration.

Power processor for a 30cm ion thruster

NASA Technical Reports Server (NTRS)

Biess, J. J.; Inouye, L. Y.

1974-01-01

A thermal vacuum power processor for the NASA Lewis 30cm Mercury Ion Engine was designed, fabricated and tested to determine compliance with electrical specifications. The power processor breadboard used the silicon controlled rectifier (SCR) series resonant inverter as the basic power stage to process all the power to an ion engine. The power processor includes a digital interface unit to process all input commands and internal telemetry signals so that operation is compatible with a central computer system. The breadboard was tested in a thermal vacuum environment. Integration tests were performed with the ion engine and demonstrate operational compatibility and reliable operation without any component failures. Electromagnetic interference data were also recorded on the design to provide information on the interaction with total spacecraft.

Engineering education and a lifetime of learning

NASA Technical Reports Server (NTRS)

Eisley, J. (Editor)

1974-01-01

The result of an eleven-week study by the National Aeronautics and Space Administration (NASA) and the American Society of Engineering Education is presented. The study was the ninth of a series of programs. The purposes of the programs were: (1) to introduce engineering school faculty members to system design and to a particular approach to teaching system design, (2) to introduce engineering faculty to NASA and to a specific NASA center, and (3) to produce a study of use to NASA and to the participants. The story was concerned with engineering education in the U.S., and concentrated upon undergraduate education and teaching, although this bias was not meant to imply that research and graduate study are less important to engineering education.

Virtual screening filters for the design of type II p38 MAP kinase inhibitors: a fragment based library generation approach.

PubMed

Badrinarayan, Preethi; Sastry, G Narahari

2012-04-01

In this work, we introduce the development and application of a three-step scoring and filtering procedure for the design of type II p38 MAP kinase leads using allosteric fragments extracted from virtual screening hits. The design of the virtual screening filters is based on a thorough evaluation of docking methods, DFG-loop conformation, binding interactions and chemotype specificity of the 138 p38 MAP kinase inhibitors from Protein Data Bank bound to DFG-in and DFG-out conformations using Glide, GOLD and CDOCKER. A 40 ns molecular dynamics simulation with the apo, type I with DFG-in and type II with DFG-out forms was carried out to delineate the effects of structural variations on inhibitor binding. The designed docking-score and sub-structure filters were first tested on a dataset of 249 potent p38 MAP kinase inhibitors from seven diverse series and 18,842 kinase inhibitors from PDB, to gauge their capacity to discriminate between kinase and non-kinase inhibitors and likewise to selectively filter-in target-specific inhibitors. The designed filters were then applied in the virtual screening of a database of ten million (10⁷) compounds resulting in the identification of 100 hits. Based on their binding modes, 98 allosteric fragments were extracted from the hits and a fragment library was generated. New type II p38 MAP kinase leads were designed by tailoring the existing type I ATP site binders with allosteric fragments using a common urea linker. Target specific virtual screening filters can thus be easily developed for other kinases based on this strategy to retrieve target selective compounds. Copyright © 2012 Elsevier Inc. All rights reserved.

Subsonic aircraft: Evolution and the matching of size to performance

NASA Technical Reports Server (NTRS)

Loftin, L. K., Jr.

1980-01-01

Methods for estimating the approximate size, weight, and power of aircraft intended to meet specified performance requirements are presented for both jet-powered and propeller-driven aircraft. The methods are simple and require only the use of a pocket computer for rapid application to specific sizing problems. Application of the methods is illustrated by means of sizing studies of a series of jet-powered and propeller-driven aircraft with varying design constraints. Some aspects of the technical evolution of the airplane from 1918 to the present are also briefly discussed.

Description of A 2.3 kW power transformer for space applications

NASA Technical Reports Server (NTRS)

Hansen, I.

1979-01-01

The paper describes the principal features and special testing of a high-frequency high-power low-specific-weight (0.57 kg/kW) 2.3-kW electronic power transformer developed for space applications. The transformer is operated in a series resonant inverter supplying beam power to a 30-cm mercury ion thruster. High efficiency (above 98.5%) is obtained through careful detailed design. A number of unique heat removal techniques are discussed which control the winding temperature using only the available conductive cooling.

Earth orbital teleoperator systems evaluation

NASA Technical Reports Server (NTRS)

Shields, N. L., Jr.; Slaughter, P. H.; Brye, R. G.; Henderson, D. E.

1979-01-01

The mechanical extension of the human operator to remote and specialized environments poses a series of complex operational questions. A technical and scientific team was organized to investigate these questions through conducting specific laboratory and analytical studies. The intent of the studies was to determine the human operator requirements for remotely manned systems and to determine the particular effects that various system parameters have on human operator performance. In so doing, certain design criteria based on empirically derived data concerning the ultimate control system, the human operator, were added to the Teleoperator Development Program.

Power Analysis for a Proposed Group Randomized Control Trial (GRCT) on the Road to Mental Readiness (R2MP) Program

DTIC Science & Technology

2014-08-01

the Minister of National Defence, 2014 © Sa Majesté la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale...specifically for the target GRCT population. The internal consistency and factorial validity of this new measure has been established in a series of studies...measure. Journal of general internal medicine. 2001;16(9):606-13. [11] Richards K, Fikretoglu D. Using Administrative Data to Inform the Design of a

A tunable few electron triple quantum dot

NASA Astrophysics Data System (ADS)

Gaudreau, L.; Kam, A.; Granger, G.; Studenikin, S. A.; Zawadzki, P.; Sachrajda, A. S.

2009-11-01

In this paper, we report on a tunable few electron lateral triple quantum dot design. The quantum dot potentials are arranged in series. The device is aimed at studies of triple quantum dot properties where knowing the exact number of electrons is important as well as quantum information applications involving electron spin qubits. We demonstrate tuning strategies for achieving required resonant conditions such as quadruple points where all three quantum dots are on resonance. We find that in such a device resonant conditions at specific configurations are accompanied by complex charge transfer behavior.

Computational Fluid Dynamics (CFD) investigation onto passenger car disk brake design

NASA Astrophysics Data System (ADS)

Munisamy, Kannan M.; Kanasan Moorthy, Shangkari K.

2013-06-01

The aim of this study is to investigate the flow and heat transfer in ventilated disc brakes using Computational Fluid Dynamics (CFD). NACA Series blade is designed for ventilated disc brake and the cooling characteristic is compared to the baseline design. The ventilated disc brakes are simulated using commercial CFD software FLUENTTM using simulation configuration that was obtained from experiment data. The NACA Series blade design shows improvements in Nusselt number compared to baseline design.

Taurus II Stage Test Simulations: Using Large-Scale CFD Simulations to Provide Critical Insight into Plume Induced Environments During Design

NASA Technical Reports Server (NTRS)

Struzenberg, L. L.; West, J. S.

2011-01-01

This paper describes the use of targeted Loci/CHEM CFD simulations to evaluate the effects of a dual-engine first-stage hot-fire test on an evolving integrated launch pad/test article design. This effort was undertaken as a part of the NESC Independent Assessment of the Taurus II Stage Test Series. The underlying conceptual model included development of a series of computational models and simulations to analyze the plume induced environments on the pad, facility structures and test article. A pathfinder simulation was first developed, capable of providing quick-turn around evaluation of plume impingement pressures on the flame deflector. Results from this simulation were available in time to provide data for an ongoing structural assessment of the deflector. The resulting recommendation was available in a timely manner and was incorporated into construction schedule for the new launch stand under construction at Wallops Flight Facility. A series of Reynolds-Averaged Navier-Stokes (RANS) quasi-steady simulations representative of various key elements of the test profile was performed to identify potential concerns with the test configuration and test profile. As required, unsteady Hybrid-RANS/LES simulations were performed, to provide additional insight into critical aspects of the test sequence. Modifications to the test-specific hardware and facility structures thermal protection as well as modifications to the planned hot-fire test profile were implemented based on these simulation results.

The use of segmented regression in analysing interrupted time series studies: an example in pre-hospital ambulance care.

PubMed

Taljaard, Monica; McKenzie, Joanne E; Ramsay, Craig R; Grimshaw, Jeremy M

2014-06-19

An interrupted time series design is a powerful quasi-experimental approach for evaluating effects of interventions introduced at a specific point in time. To utilize the strength of this design, a modification to standard regression analysis, such as segmented regression, is required. In segmented regression analysis, the change in intercept and/or slope from pre- to post-intervention is estimated and used to test causal hypotheses about the intervention. We illustrate segmented regression using data from a previously published study that evaluated the effectiveness of a collaborative intervention to improve quality in pre-hospital ambulance care for acute myocardial infarction (AMI) and stroke. In the original analysis, a standard regression model was used with time as a continuous variable. We contrast the results from this standard regression analysis with those from segmented regression analysis. We discuss the limitations of the former and advantages of the latter, as well as the challenges of using segmented regression in analysing complex quality improvement interventions. Based on the estimated change in intercept and slope from pre- to post-intervention using segmented regression, we found insufficient evidence of a statistically significant effect on quality of care for stroke, although potential clinically important effects for AMI cannot be ruled out. Segmented regression analysis is the recommended approach for analysing data from an interrupted time series study. Several modifications to the basic segmented regression analysis approach are available to deal with challenges arising in the evaluation of complex quality improvement interventions.

Evolution of the Instructional Design in a Series of Online Workshops

ERIC Educational Resources Information Center

Patry, Anne; Brown, Elizabeth Campbell; Rousseau, Rémi; Caron, Jeanette

2015-01-01

This case recounts the story of the design and production of a series of online workshops for French-speaking healthcare professionals in Canada. The project spans a couple of years and, despite encountering some challenges, succeeds in large part because of its strong foundation: the instructional design. This case study features an instructional…

77 FR 71399 - Notice of Public Workshop: Blueprint for Action: Workshop on the Design of the National Network...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-30

...).'' This workshop series provides a forum for the AMNPO to present the proposed design of the National...: Blueprint for Action: Workshop on the Design of the National Network for Manufacturing Innovation (NNMI... Standards and Technology (NIST), announces the first workshop in a new series of public workshops entitled...

A small molecule chemical chaperone optimizes its unfolded state contraction and denaturant like properties

NASA Astrophysics Data System (ADS)

Sharma, Sunny; Sarkar, Suparna; Paul, Simanta Sarani; Roy, Syamal; Chattopadhyay, Krishnananda

2013-12-01

Protein aggregation is believed to occur through the formation of misfolded conformations. It is expected that, in order to minimize aggregation, an effective small molecule chaperone would destabilize these intermediates. To study the mechanism of a chemical chaperone, we have designed a series of mutant proteins in which a tryptophan residue experiences different local environments and solvent exposures. We show that these mutants correspond to a series of conformationally altered proteins with varying degree of misfolding stress and aggregation propensities. Using arginine as a model small molecule, we show that a combination of unfolded state contraction and denaturant like properties results in selective targeting and destabilization of the partially folded proteins. In comparison, the effect of arginine towards the folded like control mutant, which is not aggregation prone, is significantly less. Other small molecules, lacking either of the above two properties, do not offer any specificity towards the misfolded proteins.

Ion mobility analyzer - quadrupole mass spectrometer system design

NASA Astrophysics Data System (ADS)

Cuna, C.; Leuca, M.; Lupsa, N.; Mirel, V.; Bocos-Bintintan, V.; Cuna, Stela; Cosma, V.; Tusa, Florina

2009-08-01

Because of their extremely high sensitivity for chemicals with elevated electronegativity or high proton affinity the ion mobility analysers are ideal for the ultra-trace detection of toxic or explosive chemicals, most of these situated often at concentration levels of sub-ppb (parts-per-billion). Ion mobility spectrometers (IMS) can be used to identify illicit drugs or environmental pollutants. Since resolution of an IMS is relatively low, to achieve an accurate identification of target analyte it is recommended to couple the IMS with a quadrupole mass spectrometer (QMS) or a time of flight mass spectrometer, acquiring in this way confirmatory information. This coupling is made through a specific interface. In this paper, an experimental model of such a tandem instrument, IMS-QMS is described. Accomplishment of this general purpose will be done, overcoming a series of specific issues. This implies the solving, using innovative solutions, of a series of complex issues: ensuring the stability of the ions beam generated by ion source; transfer with a good efficiency of the ionic current from IMS analyser to QMS; and realization of a special electronic circuitry which will be able to detect both positive and negative ions.

A Modular Toolset for Recombination Transgenesis and Neurogenetic Analysis of Drosophila

PubMed Central

Wang, Ji-Wu; Beck, Erin S.; McCabe, Brian D.

2012-01-01

Transgenic Drosophila have contributed extensively to our understanding of nervous system development, physiology and behavior in addition to being valuable models of human neurological disease. Here, we have generated a novel series of modular transgenic vectors designed to optimize and accelerate the production and analysis of transgenes in Drosophila. We constructed a novel vector backbone, pBID, that allows both phiC31 targeted transgene integration and incorporates insulator sequences to ensure specific and uniform transgene expression. Upon this framework, we have built a series of constructs that are either backwards compatible with existing restriction enzyme based vectors or utilize Gateway recombination technology for high-throughput cloning. These vectors allow for endogenous promoter or Gal4 targeted expression of transgenic proteins with or without fluorescent protein or epitope tags. In addition, we have generated constructs that facilitate transgenic splice isoform specific RNA inhibition of gene expression. We demonstrate the utility of these constructs to analyze proteins involved in nervous system development, physiology and neurodegenerative disease. We expect that these reagents will facilitate the proficiency and sophistication of Drosophila genetic analysis in both the nervous system and other tissues. PMID:22848718

Determining the structure of an optimal personnel profile for a transformed commission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Graniere, R.J.

1998-06-01

In the classic sociological sense, an organization such as a public utility commission is a social unit consisting of specific groupings constructed and reconstructed deliberately and with forethought to achieve specific goals. These organizational groupings determined on the basis of rational divisions of labor, power, and communication are designed with the objective of placing individuals into positions where they are expected to make the largest contribution towards achieving the organization`s goals. It is reasonable then to conclude that proponents of the classical view had in mind a readily identifiable common ground among the organization`s members that the organization exploits asmore » it selects its goals. Recently, it has been argued that metaphors are an acceptable shorthand for this common ground that provides an insight into the types of personnel an organization would find most suitable for assisting its efforts to reach its goals. This report is one of a series of reports on the transformation of public utility commissions. Previous reports in the series have focused on the transformation of a commission`s culture, roles, and activities. This report focuses on the staffing dimension of the personnel mix needed to support these changes.« less

A Ratiometric Acoustogenic Probe for in Vivo Imaging of Endogenous Nitric Oxide.

PubMed

Reinhardt, Christopher J; Zhou, Effie Y; Jorgensen, Michael D; Partipilo, Gina; Chan, Jefferson

2018-01-24

Photoacoustic (PA) imaging is an emerging imaging modality that utilizes optical excitation and acoustic detection to enable high resolution at centimeter depths. The development of activatable PA probes can expand the utility of this technology to allow for detection of specific stimuli within live-animal models. Herein, we report the design, development, and evaluation of a series of Acoustogenic Probe(s) for Nitric Oxide (APNO) for the ratiometric, analyte-specific detection of nitric oxide (NO) in vivo. The best probe in the series, APNO-5, rapidly responds to NO to form an N-nitroso product with a concomitant 91 nm hypsochromic shift. This property enables ratiometric PA imaging upon selective irradiation of APNO-5 and the corresponding product, tAPNO-5. Moreover, APNO-5 displays the requisite photophysical characteristics for in vivo PA imaging (e.g., high absorptivity, low quantum yield) as well as high biocompatibility, stability, and selectivity for NO over a variety of biologically relevant analytes. APNO-5 was successfully applied to the detection of endogenous NO in a murine lipopolysaccharide-induced inflammation model. Our studies show a 1.9-fold increase in PA signal at 680 nm and a 1.3-fold ratiometric turn-on relative to a saline control.

Digital map databases in support of avionic display systems

NASA Astrophysics Data System (ADS)

Trenchard, Michael E.; Lohrenz, Maura C.; Rosche, Henry, III; Wischow, Perry B.

1991-08-01

The emergence of computerized mission planning systems (MPS) and airborne digital moving map systems (DMS) has necessitated the development of a global database of raster aeronautical chart data specifically designed for input to these systems. The Naval Oceanographic and Atmospheric Research Laboratory''s (NOARL) Map Data Formatting Facility (MDFF) is presently dedicated to supporting these avionic display systems with the development of the Compressed Aeronautical Chart (CAC) database on Compact Disk Read Only Memory (CDROM) optical discs. The MDFF is also developing a series of aircraft-specific Write-Once Read Many (WORM) optical discs. NOARL has initiated a comprehensive research program aimed at improving the pilots'' moving map displays current research efforts include the development of an alternate image compression technique and generation of a standard set of color palettes. The CAC database will provide digital aeronautical chart data in six different scales. CAC is derived from the Defense Mapping Agency''s (DMA) Equal Arc-second (ARC) Digitized Raster Graphics (ADRG) a series of scanned aeronautical charts. NOARL processes ADRG to tailor the chart image resolution to that of the DMS display while reducing storage requirements through image compression techniques. CAC is being distributed by DMA as a library of CDROMs.

Improving the scientific foundation for mixtures joint toxicity and risk assessment: contributions from the SOT mixtures project--introduction.

PubMed

Mason, Ann M; Borgert, Christopher J; Bus, James S; Moiz Mumtaz, M; Simmons, Jane Ellen; Sipes, I Glenn

2007-09-01

Risk assessments are enhanced when policy and other decision-makers have access to experimental science designed to specifically inform key policy questions. Currently, our scientific understanding and science policy for environmental mixtures are based largely on extrapolating from and combining data in the observable range of single chemical toxicity to lower environmental concentrations and composition, i.e., using higher dose data to extrapolate and predict lower dose toxicity. There is a growing consensus that the default assumptions underlying those mixtures risk assessments that are conducted in the absence of actual mixtures data rest on an inadequate scientific database. Future scientific research should both build upon the current science and advance toxicology into largely uncharted territory. More precise approaches to better characterize toxicity of mixtures are needed. The Society of Toxicology (SOT) sponsored a series of panels, seminars, and workshops to help catalyze and improve the design and conduct of experimental toxicological research to better inform risk assessors and decision makers. This paper summarizes the activities of the SOT Mixtures Program and serves as the introductory paper to a series of articles in this issue, which hope to inspire innovative research and challenge the status quo.

Orthotic intervention incorporating the dart-thrower's motion as part of conservative management guidelines for treatment of scapholunate injury.

PubMed

Anderson, Hamish; Hoy, Greg

2016-01-01

Case series. This paper describes conservative guidelines for the management of scapho-lunate interosseous ligament (SLIL) injury including fabrication of an orthosis that restricts active wrist movement to the dart-throwers (DTM) plane. The dart throwers' orthosis (DTO) was designed as a response to biomechanical studies suggesting that restraining motion to the DTM would off-load a deficient SLIL. After six weeks of wearing the DTO, the 5 patients in this case series initiated an exercise program that incorporated wrist proprioceptive training and specific muscle strengthening. The DTO was designed to incorporate controlled movement in order to better integrate the secondary wrist stabilizers in wrists that had a deficient SLIL. The orthosis and the exercise program harnessed proprioceptive influences using active motion within the DTM plane, and stimulated mechanoreceptors so as to enhance stability. All patients demonstrated improvement in subjective and objective outcomes including self-reported pain and function. Orthotic intervention that controls motion within the DTM, combined with an appropriate proprioceptive rehabilitation program, may provide a viable conservative treatment option for patients with a similar clinical presentation. 4. Copyright © 2016 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

Application of the 4-D XCAT Phantoms in Biomedical Imaging and Beyond.

PubMed

Segars, W Paul; Tsui, B M W; Cai, Jing; Yin, Fang-Fang; Fung, George S K; Samei, Ehsan

2018-03-01

The four-dimensional (4-D) eXtended CArdiac-Torso (XCAT) series of phantoms was developed to provide accurate computerized models of the human anatomy and physiology. The XCAT series encompasses a vast population of phantoms of varying ages from newborn to adult, each including parameterized models for the cardiac and respiratory motions. With great flexibility in the XCAT's design, any number of body sizes, different anatomies, cardiac or respiratory motions or patterns, patient positions and orientations, and spatial resolutions can be simulated. As such, the XCAT phantoms are gaining a wide use in biomedical imaging research. There they can provide a virtual patient base from which to quantitatively evaluate and improve imaging instrumentation, data acquisition, techniques, and image reconstruction and processing methods which can lead to improved image quality and more accurate clinical diagnoses. The phantoms have also found great use in radiation dosimetry, radiation therapy, medical device design, and even the security and defense industry. This review paper highlights some specific areas in which the XCAT phantoms have found use within biomedical imaging and other fields. From these examples, we illustrate the increasingly important role that computerized phantoms and computer simulation are playing in the research community.

A WEB based approach in biomedical engineering design education.

PubMed

Enderle, J D; Browne, A F; Hallowell, M B

1997-01-01

As part of the accreditation process for university engineering programs, students are required to complete a minimum number of design credits in their course of study, typically at the senior level. Many call this the capstone course. Engineering design is a course or series of courses that bring together concepts and principles that students learn in their field of study--it involves the integration and extension of material learned in their major toward a specific project. Most often, the student is exposed to system-wide analysis, critique and evaluation for the first time. Design is an iterative, decision making process in which the student optimally applies previously learned material to meet a stated objective. At the University of Connecticut, students work in teams of 3-4 members and work on externally sponsored projects. To facilitate working with sponsors, a WEB based approach is used for reporting the progress on projects. Students are responsible for creating their own WEB sites that support both html and pdf formats. Students provide the following deliverables: weekly progress reports, project statement, specifications, project proposal, interim report, and final report. A senior design homepage also provides links to data books and other resources for use by students. We are also planning distance learning experiences between two campuses so students can work on projects that involve the use of video conferencing.

Simultaneous Binding of Hybrid Molecules Constructed with Dual DNA-Binding Components to a G-Quadruplex and Its Proximal Duplex.

PubMed

Asamitsu, Sefan; Obata, Shunsuke; Phan, Anh Tuân; Hashiya, Kaori; Bando, Toshikazu; Sugiyama, Hiroshi

2018-03-20

A G-quadruplex (quadruplex) is a nucleic acid secondary structure adopted by guanine-rich sequences and is considered to be relevant to various pharmacological and biological contexts. Although a number of researchers have endeavored to discover and develop quadruplex-interactive molecules, poor ligand designability originating from topological similarity of the skeleton of diverse quadruplexes has remained a bottleneck for gaining specificity for individual quadruplexes. This work reports on hybrid molecules that were constructed with dual DNA-binding components, a cyclic imidazole/lysine polyamide (cIKP), and a hairpin pyrrole/imidazole polyamide (hPIP), with the aim toward specific quadruplex targeting by reading out the local duplex DNA sequence adjacent to designated quadruplexes in the genome. By means of circular dichroism (CD), fluorescence resonance energy transfer (FRET), surface plasmon resonance (SPR), and NMR techniques, we showed the dual and simultaneous recognition of the respective segment via hybrid molecules, and the synergistic and mutual effect of each binding component that was appropriately linked on higher binding affinity and modest sequence specificity. Monitoring quadruplex and duplex imino protons of the quadruplex/duplex motif titrated with hybrid molecules clearly revealed distinct features of the binding of hybrid molecules to the respective segments upon their simultaneous recognition. A series of the systematic and detailed binding assays described here showed that the concept of simultaneous recognition of quadruplex and its proximal duplex by hybrid molecules constructed with the dual DNA-binding components may provide a new strategy for ligand design, enabling targeting of a large variety of designated quadruplexes at specific genome locations. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.