The IRIS Federator: Accessing Seismological Data Across Data Centers

NASA Astrophysics Data System (ADS)

Trabant, C. M.; Van Fossen, M.; Ahern, T. K.; Weekly, R. T.

2015-12-01

In 2013 the International Federation of Digital Seismograph Networks (FDSN) approved a specification for web service interfaces for accessing seismological station metadata, time series and event parameters. Since then, a number of seismological data centers have implemented FDSN service interfaces, with more implementations in development. We have developed a new system called the IRIS Federator which leverages this standardization and provides the scientific community with a service for easy discovery and access of seismological data across FDSN data centers. These centers are located throughout the world and this work represents one model of a system for data collection across geographic and political boundaries.The main components of the IRIS Federator are a catalog of time series metadata holdings at each data center and a web service interface for searching the catalog. The service interface is designed to support client­-side federated data access, a model in which the client (software run by the user) queries the catalog and then collects the data from each identified center. By default the results are returned in a format suitable for direct submission to those web services, but could also be formatted in a simple text format for general data discovery purposes. The interface will remove any duplication of time series channels between data centers according to a set of business rules by default, however a user may request results with all duplicate time series entries included. We will demonstrate how client­-side federation is being incorporated into some of the DMC's data access tools. We anticipate further enhancement of the IRIS Federator to improve data discovery in various scenarios and to improve usefulness to communities beyond seismology.Data centers with FDSN web services: http://www.fdsn.org/webservices/The IRIS Federator query interface: http://service.iris.edu/irisws/fedcatalog/1/

The OGC Sensor Web Enablement framework

NASA Astrophysics Data System (ADS)

Cox, S. J.; Botts, M.

2006-12-01

Sensor observations are at the core of natural sciences. Improvements in data-sharing technologies offer the promise of much greater utilisation of observational data. A key to this is interoperable data standards. The Open Geospatial Consortium's (OGC) Sensor Web Enablement initiative (SWE) is developing open standards for web interfaces for the discovery, exchange and processing of sensor observations, and tasking of sensor systems. The goal is to support the construction of complex sensor applications through real-time composition of service chains from standard components. The framework is based around a suite of standard interfaces, and standard encodings for the message transferred between services. The SWE interfaces include: Sensor Observation Service (SOS)-parameterized observation requests (by observation time, feature of interest, property, sensor); Sensor Planning Service (SPS)-tasking a sensor- system to undertake future observations; Sensor Alert Service (SAS)-subscription to an alert, usually triggered by a sensor result exceeding some value. The interface design generally follows the pattern established in the OGC Web Map Service (WMS) and Web Feature Service (WFS) interfaces, where the interaction between a client and service follows a standard sequence of requests and responses. The first obtains a general description of the service capabilities, followed by obtaining detail required to formulate a data request, and finally a request for a data instance or stream. These may be implemented in a stateless "REST" idiom, or using conventional "web-services" (SOAP) messaging. In a deployed system, the SWE interfaces are supplemented by Catalogue, data (WFS) and portrayal (WMS) services, as well as authentication and rights management. The standard SWE data formats are Observations and Measurements (O&M) which encodes observation metadata and results, Sensor Model Language (SensorML) which describes sensor-systems, Transducer Model Language (TML) which covers low-level data streams, and domain-specific GML Application Schemas for definitions of the target feature types. The SWE framework has been demonstrated in several interoperability testbeds. These were based around emergency management, security, contamination and environmental monitoring scenarios.

Distributed user interfaces for clinical ubiquitous computing applications.

PubMed

Bång, Magnus; Larsson, Anders; Berglund, Erik; Eriksson, Henrik

2005-08-01

Ubiquitous computing with multiple interaction devices requires new interface models that support user-specific modifications to applications and facilitate the fast development of active workspaces. We have developed NOSTOS, a computer-augmented work environment for clinical personnel to explore new user interface paradigms for ubiquitous computing. NOSTOS uses several devices such as digital pens, an active desk, and walk-up displays that allow the system to track documents and activities in the workplace. We present the distributed user interface (DUI) model that allows standalone applications to distribute their user interface components to several devices dynamically at run-time. This mechanism permit clinicians to develop their own user interfaces and forms to clinical information systems to match their specific needs. We discuss the underlying technical concepts of DUIs and show how service discovery, component distribution, events and layout management are dealt with in the NOSTOS system. Our results suggest that DUIs--and similar network-based user interfaces--will be a prerequisite of future mobile user interfaces and essential to develop clinical multi-device environments.

Phase 111A Crew Interface Specifications Development for Inflight Maintenance and Stowage Functions

NASA Technical Reports Server (NTRS)

Carl, John G.

1973-01-01

This report presents the findings and data products developed during the Phase IIIA Crew Interface Specification Study for Inflight Maintenance and Stowage Functions, performed by General Electric for the NASA, Johnson Space Center with a set of documentation that can be used as definitive guidelines to improve the present process of defining, controlling and managing flight crew interface requirements that are related to inflight maintenance (including assembly and servicing) and stowage functions. During the Phase IIIA contract period, the following data products were developed: 1) Projected NASA Crew Procedures/Flight Data File Development Process. 2) Inflight Maintenance Management Process Description. 3) Preliminary Draft, General Specification, Inflight Maintenance Management Requirements. 4) Inflight Maintenance Operational Process Description. 5) Preliminary Draft, General Specification, Inflight Maintenance Task and Support Requirements Analysis. 6) Suggested IFM Data Processing Reports for Logistics Management The above Inflight Maintenance data products have been developed during the Phase IIIA study after review of Space Shuttle Program Documentation, including the Level II Integrated Logistics Requirements and other DOD and NASA data relative to Payloads Accommodations and Satellite On-Orbit Servicing. These Inflight Maintenance data products were developed to be in consonance with Space Shuttle Program technical and management requirements.

ESTRACK Support for CCSDS Space Communication Cross Support Service Management

NASA Astrophysics Data System (ADS)

Dreihahn, H.; Unal, M.; Hoffmann, A.

2011-08-01

The CCSDS Recommended Standard for Space Communication Cross Support Service Management (SCCS SM) published as Blue Book in August 2009 is intended to provide standardised interfaces to negotiate, schedule, and manage the support of space missions by ground station network operators. ESA as a member of CCSDS has actively supported the development of the SCCS SM standard and is obviously interested in adopting it. Support of SCCS SM conforming interfaces and procedures includes:• Provision of SCCS SM conforming interfaces to non ESA missions;• Use of SCCS SM interfaces provided by other ground station operators to manage cross support of ESA missions;• In longer terms potentially use of SCCS SM interfaces and procedures also internally for support of ESA missions by ESTRACK.In the recent years ESOC has automated management and scheduling of ESA Tracking Network (ESTRACK) services by the specification, development, and deployment of the ESTRACK Management System (EMS), more specifically its planning and scheduling components ESTRACK Planning System and ESTRACK Scheduling System. While full support of the SCCS SM standard will involve also other elements of the ground segment operated by ESOC such as the Flight Dynamic System, EMS is at the core of service management and it is therefore appropriate to initially focus on the question to what extent EMS can support SCCS SM. This paper presents results of the initial analysis phase. After briefly presenting the SCCS SM standard and the relevant components of the ESTRACK management system, we will discuss the initial deployment options, open issues and a tentative roadmap for the way to proceed. Obviously the adoption of a cross support standard requires and discussion and coordination of the involved parties and agencies, especially in the light of the fact that the SCCS SM standard has many optional parts.

Computer Program Development Specification for Ada Integrated Environment: KAPSE (Kernel Ada Programming Support Environment)/Database, Type B5, B5-AIE(1).KAPSE(1).

DTIC Science & Technology

1982-11-12

File 1/0 Prgram Invocation Other Access M and Control Services KAPSE/Host Interface most Operating System Peripherals/ 01 su ?eetworks 6282318-2 Figure 3...3.2.4.3.8.5 Transitory Windows The TRANSITORY flag is used to prevent permanent dependence on temporary windows created simply for focusing on a part of the...KAPSE/Tool interfaces in terms of these low-level host-independent interfaces. In addition, the KAPSE/Host interface packages prevent the application

Towards the formal specification of the requirements and design of a processor interface unit

NASA Technical Reports Server (NTRS)

Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

1993-01-01

Work to formally specify the requirements and design of a Processor Interface Unit (PIU), a single-chip subsystem providing memory interface, bus interface, and additional support services for a commercial microprocessor within a fault-tolerant computer system, is described. This system, the Fault-Tolerant Embedded Processor (FTEP), is targeted towards applications in avionics and space requiring extremely high levels of mission reliability, extended maintenance free operation, or both. The approaches that were developed for modeling the PIU requirements and for composition of the PIU subcomponents at high levels of abstraction are described. These approaches were used to specify and verify a nontrivial subset of the PIU behavior. The PIU specification in Higher Order Logic (HOL) is documented in a companion NASA contractor report entitled 'Towards the Formal Specification of the Requirements and Design of a Processor Interfacs Unit - HOL Listings.' The subsequent verification approach and HOL listings are documented in NASA contractor report entitled 'Towards the Formal Verification of the Requirements and Design of a Processor Interface Unit' and NASA contractor report entitled 'Towards the Formal Verification of the Requirements and Design of a Processor Interface Unit - HOL Listings.'

Exploring NASA GES DISC Data with Interoperable Services

NASA Technical Reports Server (NTRS)

Zhao, Peisheng; Yang, Wenli; Hegde, Mahabal; Wei, Jennifer C.; Kempler, Steven; Pham, Long; Teng, William; Savtchenko, Andrey

2015-01-01

Overview of NASA GES DISC (NASA Goddard Earth Science Data and Information Services Center) data with interoperable services: Open-standard and Interoperable Services Improve data discoverability, accessibility, and usability with metadata, catalogue and portal standards Achieve data, information and knowledge sharing across applications with standardized interfaces and protocols Open Geospatial Consortium (OGC) Data Services and Specifications Web Coverage Service (WCS) -- data Web Map Service (WMS) -- pictures of data Web Map Tile Service (WMTS) --- pictures of data tiles Styled Layer Descriptors (SLD) --- rendered styles.

Integrated Information Support System (IISS). Volume 8. User Interface Subsystem. Part 3. User Interface Services Product Specification.

DTIC Science & Technology

1985-11-01

User Interface that consists of a set of callable execution time routines available to an application program for form processing . IISS Function Screen...provisions for test consists of the normal testing techniques that are accomplished during the construction process . They consist of design and code...application presents a form * to the user which must be filled in with information for processing by that application. The application then

GeoNetwork powered GI-cat: a geoportal hybrid solution

NASA Astrophysics Data System (ADS)

Baldini, Alessio; Boldrini, Enrico; Santoro, Mattia; Mazzetti, Paolo

2010-05-01

To the aim of setting up a Spatial Data Infrastructures (SDI) the creation of a system for the metadata management and discovery plays a fundamental role. An effective solution is the use of a geoportal (e.g. FAO/ESA geoportal), that has the important benefit of being accessible from a web browser. With this work we present a solution based integrating two of the available frameworks: GeoNetwork and GI-cat. GeoNetwork is an opensource software designed to improve accessibility of a wide variety of data together with the associated ancillary information (metadata), at different scale and from multidisciplinary sources; data are organized and documented in a standard and consistent way. GeoNetwork implements both the Portal and Catalog components of a Spatial Data Infrastructure (SDI) defined in the OGC Reference Architecture. It provides tools for managing and publishing metadata on spatial data and related services. GeoNetwork allows harvesting of various types of web data sources e.g. OGC Web Services (e.g. CSW, WCS, WMS). GI-cat is a distributed catalog based on a service-oriented framework of modular components and can be customized and tailored to support different deployment scenarios. It can federate a multiplicity of catalogs services, as well as inventory and access services in order to discover and access heterogeneous ESS resources. The federated resources are exposed by GI-cat through several standard catalog interfaces (e.g. OGC CSW AP ISO, OpenSearch, etc.) and by the GI-cat extended interface. Specific components implement mediation services for interfacing heterogeneous service providers, each of which exposes a specific standard specification; such components are called Accessors. These mediating components solve providers data modelmultiplicity by mapping them onto the GI-cat internal data model which implements the ISO 19115 Core profile. Accessors also implement the query protocol mapping; first they translate the query requests expressed according to the interface protocols exposed by GI-cat into the multiple query dialects spoken by the resource service providers. Currently, a number of well-accepted catalog and inventory services are supported, including several OGC Web Services, THREDDS Data Server, SeaDataNet Common Data Index, GBIF and OpenSearch engines. A GeoNetwork powered GI-cat has been developed in order to exploit the best of the two frameworks. The new system uses a modified version of GeoNetwork web interface in order to add the capability of querying also the specified GI-cat catalog and not only the GeoNetwork internal database. The resulting system consists in a geoportal in which GI-cat plays the role of the search engine. This new system allows to distribute the query on the different types of data sources linked to a GI-cat. The metadata results of the query are then visualized by the Geonetwork web interface. This configuration was experimented in the framework of GIIDA, a project of the Italian National Research Council (CNR) focused on data accessibility and interoperability. A second advantage of this solution is achieved setting up a GeoNetwork catalog amongst the accessors of the GI-cat instance. Such a configuration will allow in turn GI-cat to run the query against the internal GeoNetwork database. This allows to have both the harvesting and the metadata editor functionalities provided by GeoNetwork and the distributed search functionality of GI-cat available in a consistent way through the same web interface.

Object Management Group object transaction service based on an X/Open and International Organization for Standardization open systems interconnection transaction processing kernel

NASA Astrophysics Data System (ADS)

Liang, J.; Sédillot, S.; Traverson, B.

1997-09-01

This paper addresses federation of a transactional object standard - Object Management Group (OMG) object transaction service (OTS) - with the X/Open distributed transaction processing (DTP) model and International Organization for Standardization (ISO) open systems interconnection (OSI) transaction processing (TP) communication protocol. The two-phase commit propagation rules within a distributed transaction tree are similar in the X/Open, ISO and OMG models. Building an OTS on an OSI TP protocol machine is possible because the two specifications are somewhat complementary. OTS defines a set of external interfaces without specific internal protocol machine, while OSI TP specifies an internal protocol machine without any application programming interface. Given these observations, and having already implemented an X/Open two-phase commit transaction toolkit based on an OSI TP protocol machine, we analyse the feasibility of using this implementation as a transaction service provider for OMG interfaces. Based on the favourable result of this feasibility study, we are implementing an OTS compliant system, which, by initiating the extensibility and openness strengths of OSI TP, is able to provide interoperability between X/Open DTP and OMG OTS models.

Reciprocal and Scholarly Service Learning: Emergent Theoretical Understandings of the University-Community Interface in South Africa

ERIC Educational Resources Information Center

Smith-Tolken, Antoinette; Bitzer, Eli

2017-01-01

This study addresses underlying principles to interpret scholarly-based service-related teaching and learning. Such principles include addressing specific concerns of communities, transforming theoretical knowledge into lived experiences for students, making the knowledge generated within communities meaningful and forging constant growth and…

JAliEn - A new interface between the AliEn jobs and the central services

NASA Astrophysics Data System (ADS)

Grigoras, A. G.; Grigoras, C.; Pedreira, M. M.; Saiz, P.; Schreiner, S.

2014-06-01

Since the ALICE experiment began data taking in early 2010, the amount of end user jobs on the AliEn Grid has increased significantly. Presently 1/3 of the 40K CPU cores available to ALICE are occupied by jobs submitted by about 400 distinct users, individually or in organized analysis trains. The overall stability of the AliEn middleware has been excellent throughout the 3 years of running, but the massive amount of end-user analysis and its specific requirements and load has revealed few components which can be improved. One of them is the interface between users and central AliEn services (catalogue, job submission system) which we are currently re-implementing in Java. The interface provides persistent connection with enhanced data and job submission authenticity. In this paper we will describe the architecture of the new interface, the ROOT binding which enables the use of a single interface in addition to the standard UNIX-like access shell and the new security-related features.

Advanced information processing system: Local system services

NASA Technical Reports Server (NTRS)

Burkhardt, Laura; Alger, Linda; Whittredge, Roy; Stasiowski, Peter

1989-01-01

The Advanced Information Processing System (AIPS) is a multi-computer architecture composed of hardware and software building blocks that can be configured to meet a broad range of application requirements. The hardware building blocks are fault-tolerant, general-purpose computers, fault-and damage-tolerant networks (both computer and input/output), and interfaces between the networks and the computers. The software building blocks are the major software functions: local system services, input/output, system services, inter-computer system services, and the system manager. The foundation of the local system services is an operating system with the functions required for a traditional real-time multi-tasking computer, such as task scheduling, inter-task communication, memory management, interrupt handling, and time maintenance. Resting on this foundation are the redundancy management functions necessary in a redundant computer and the status reporting functions required for an operator interface. The functional requirements, functional design and detailed specifications for all the local system services are documented.

The use of graphics in the design of the human-telerobot interface

NASA Technical Reports Server (NTRS)

Stuart, Mark A.; Smith, Randy L.

1989-01-01

The Man-Systems Telerobotics Laboratory (MSTL) of NASA's Johnson Space Center employs computer graphics tools in their design and evaluation of the Flight Telerobotic Servicer (FTS) human/telerobot interface on the Shuttle and on the Space Station. It has been determined by the MSTL that the use of computer graphics can promote more expedient and less costly design endeavors. Several specific examples of computer graphics applied to the FTS user interface by the MSTL are described.

The Philosophy of User Interfaces in HELIO and the Importance of CASSIS

NASA Astrophysics Data System (ADS)

Bonnin, X.; Aboudarham, J.; Renié, C.; Csillaghy, A.; Messerotti, M.; Bentley, R. D.

2012-09-01

HELIO is a European project funded under FP7 (Project No. 238969). One of its goals as a Heliospheric Virtual Observatory is to provide an easy access to many datasets scattered all over the world, in the fields of Solar physics, Heliophysics, and Planetary magnetospheres. The efficiency of such a tool is very much related to the quality of the user interface. HELIO infrastructure is based on a Service Oriented Architecture (SOA), regrouping a network of standalone components, which allows four main types of interfaces: - HELIO Front End (HFE) is a browser-based user interface, which offers a centralized access to the HELIO main functionalities. Especially, it provides the possibility to reach data directly, or to refine selection by determination of observing characteristics, such as which instrument was observing at that time, which instrument was at this location, etc. - Many services/components provide their own standalone graphical user interface. While one can directly access individually each of these interfaces, they can also be connected together. - Most services also provide direct access for any tools through a public interface. A small java library, called Java API, simplifies this access by providing client stubs for services and shields the user from security, discovery and failover issues. - Workflows capabilities are available in HELIO, allowing complex combination of queries over several services. We want the user to be able to navigate easily, at his needs, through the various interfaces, and possibly use a specific one in order to make much-dedicated queries. We will also emphasize the importance of the CASSIS project (Coordination Action for the integration of Solar System Infrastructure and Science) in encouraging the interoperability necessary to undertake scientific studies that span disciplinary boundaries. If related projects follow the guidelines being developed by CASSIS then using external resources with HELIO will be greatly simplified.

Interfacing the Controllogics PLC over Ethernet/IP.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasemir, K. U.; Dalesio, L. R.

2001-01-01

The Allen-Bradley ControlLogix [1] line of programmable logic controllers (PLCs) offers several interfaces: Ethernet, ControlNet, DeviceNet, RS-232 and others. The ControlLogix Ethernet interface module 1756-ENET uses EtherNet/IP, the ControlNet protocol [2], encapsulated in Ethernet packages, with specific service codes [3]. A driver for the Experimental Physics and Industrial Control System (EPICS) has been developed that utilizes this EtherNet/IP protocol for controllers running the vxWorks RTOS as well as a Win32 and Unix/Linux test program. Features, performance and limitations of this interface are presented.

AMBIT RESTful web services: an implementation of the OpenTox application programming interface.

PubMed

Jeliazkova, Nina; Jeliazkov, Vedrin

2011-05-16

The AMBIT web services package is one of the several existing independent implementations of the OpenTox Application Programming Interface and is built according to the principles of the Representational State Transfer (REST) architecture. The Open Source Predictive Toxicology Framework, developed by the partners in the EC FP7 OpenTox project, aims at providing a unified access to toxicity data and predictive models, as well as validation procedures. This is achieved by i) an information model, based on a common OWL-DL ontology ii) links to related ontologies; iii) data and algorithms, available through a standardized REST web services interface, where every compound, data set or predictive method has a unique web address, used to retrieve its Resource Description Framework (RDF) representation, or initiate the associated calculations.The AMBIT web services package has been developed as an extension of AMBIT modules, adding the ability to create (Quantitative) Structure-Activity Relationship (QSAR) models and providing an OpenTox API compliant interface. The representation of data and processing resources in W3C Resource Description Framework facilitates integrating the resources as Linked Data. By uploading datasets with chemical structures and arbitrary set of properties, they become automatically available online in several formats. The services provide unified interfaces to several descriptor calculation, machine learning and similarity searching algorithms, as well as to applicability domain and toxicity prediction models. All Toxtree modules for predicting the toxicological hazard of chemical compounds are also integrated within this package. The complexity and diversity of the processing is reduced to the simple paradigm "read data from a web address, perform processing, write to a web address". The online service allows to easily run predictions, without installing any software, as well to share online datasets and models. The downloadable web application allows researchers to setup an arbitrary number of service instances for specific purposes and at suitable locations. These services could be used as a distributed framework for processing of resource-intensive tasks and data sharing or in a fully independent way, according to the specific needs. The advantage of exposing the functionality via the OpenTox API is seamless interoperability, not only within a single web application, but also in a network of distributed services. Last, but not least, the services provide a basis for building web mashups, end user applications with friendly GUIs, as well as embedding the functionalities in existing workflow systems.

AMBIT RESTful web services: an implementation of the OpenTox application programming interface

PubMed Central

2011-01-01

The AMBIT web services package is one of the several existing independent implementations of the OpenTox Application Programming Interface and is built according to the principles of the Representational State Transfer (REST) architecture. The Open Source Predictive Toxicology Framework, developed by the partners in the EC FP7 OpenTox project, aims at providing a unified access to toxicity data and predictive models, as well as validation procedures. This is achieved by i) an information model, based on a common OWL-DL ontology ii) links to related ontologies; iii) data and algorithms, available through a standardized REST web services interface, where every compound, data set or predictive method has a unique web address, used to retrieve its Resource Description Framework (RDF) representation, or initiate the associated calculations. The AMBIT web services package has been developed as an extension of AMBIT modules, adding the ability to create (Quantitative) Structure-Activity Relationship (QSAR) models and providing an OpenTox API compliant interface. The representation of data and processing resources in W3C Resource Description Framework facilitates integrating the resources as Linked Data. By uploading datasets with chemical structures and arbitrary set of properties, they become automatically available online in several formats. The services provide unified interfaces to several descriptor calculation, machine learning and similarity searching algorithms, as well as to applicability domain and toxicity prediction models. All Toxtree modules for predicting the toxicological hazard of chemical compounds are also integrated within this package. The complexity and diversity of the processing is reduced to the simple paradigm "read data from a web address, perform processing, write to a web address". The online service allows to easily run predictions, without installing any software, as well to share online datasets and models. The downloadable web application allows researchers to setup an arbitrary number of service instances for specific purposes and at suitable locations. These services could be used as a distributed framework for processing of resource-intensive tasks and data sharing or in a fully independent way, according to the specific needs. The advantage of exposing the functionality via the OpenTox API is seamless interoperability, not only within a single web application, but also in a network of distributed services. Last, but not least, the services provide a basis for building web mashups, end user applications with friendly GUIs, as well as embedding the functionalities in existing workflow systems. PMID:21575202

Hierarchy of on-orbit servicing interfaces

NASA Technical Reports Server (NTRS)

Moe, Rud V.

1989-01-01

A series of equipment interfaces is involved in on-orbit servicing operations. The end-to-end hierarchy of servicing interfaces is presented. The interface concepts presented include structure and handling, and formats for transfer of resources (power, data, fluids, etc.). Consequences on cost, performance, and service ability of the use of standard designs or unique designs with interface adapters are discussed. Implications of the interface designs compatibility with remote servicing using telerobotic servicers are discussed.

Cross-Platform User Interface of E-Learning Applications

ERIC Educational Resources Information Center

Stoces, Michal; Masner, Jan; Jarolímek, Jan; Šimek, Pavel; Vanek, Jirí; Ulman, Miloš

2015-01-01

The paper discusses the development of Web educational services for specific groups. A key feature is to allow the display and use of educational materials and training services to the widest possible set of different devices, especially in the browser classic desktop computers, notebooks, tablets, mobile phones and also on different readers for…

Rewriting Requirements for Design

DTIC Science & Technology

2002-11-06

Lights 1.2.8. Window Lights 2. Behavior Hiding 2.1. Function Drivers 2.1.1. Malfunction Lights 2.1.2. Office Lights 2.2. Shared Services 2.2.1. Mode...4702, 1981. [6] P.C. Clements, Abstract Interface Specifications for the A-7E Shared Services Module, NRL Memorandum Report 4863, 1982. [7] D.L

Mercury: Reusable software application for Metadata Management, Data Discovery and Access

NASA Astrophysics Data System (ADS)

Devarakonda, Ranjeet; Palanisamy, Giri; Green, James; Wilson, Bruce E.

2009-12-01

Mercury is a federated metadata harvesting, data discovery and access tool based on both open source packages and custom developed software. It was originally developed for NASA, and the Mercury development consortium now includes funding from NASA, USGS, and DOE. Mercury is itself a reusable toolset for metadata, with current use in 12 different projects. Mercury also supports the reuse of metadata by enabling searching across a range of metadata specification and standards including XML, Z39.50, FGDC, Dublin-Core, Darwin-Core, EML, and ISO-19115. Mercury provides a single portal to information contained in distributed data management systems. It collects metadata and key data from contributing project servers distributed around the world and builds a centralized index. The Mercury search interfaces then allow the users to perform simple, fielded, spatial and temporal searches across these metadata sources. One of the major goals of the recent redesign of Mercury was to improve the software reusability across the projects which currently fund the continuing development of Mercury. These projects span a range of land, atmosphere, and ocean ecological communities and have a number of common needs for metadata searches, but they also have a number of needs specific to one or a few projects To balance these common and project-specific needs, Mercury’s architecture includes three major reusable components; a harvester engine, an indexing system and a user interface component. The harvester engine is responsible for harvesting metadata records from various distributed servers around the USA and around the world. The harvester software was packaged in such a way that all the Mercury projects will use the same harvester scripts but each project will be driven by a set of configuration files. The harvested files are then passed to the Indexing system, where each of the fields in these structured metadata records are indexed properly, so that the query engine can perform simple, keyword, spatial and temporal searches across these metadata sources. The search user interface software has two API categories; a common core API which is used by all the Mercury user interfaces for querying the index and a customized API for project specific user interfaces. For our work in producing a reusable, portable, robust, feature-rich application, Mercury received a 2008 NASA Earth Science Data Systems Software Reuse Working Group Peer-Recognition Software Reuse Award. The new Mercury system is based on a Service Oriented Architecture and effectively reuses components for various services such as Thesaurus Service, Gazetteer Web Service and UDDI Directory Services. The software also provides various search services including: RSS, Geo-RSS, OpenSearch, Web Services and Portlets, integrated shopping cart to order datasets from various data centers (ORNL DAAC, NSIDC) and integrated visualization tools. Other features include: Filtering and dynamic sorting of search results, book-markable search results, save, retrieve, and modify search criteria.

Space tug/shuttle interface compatibility study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1975-01-01

Shuttle interfaces required for space tug accommodation are primarily involved with supporting and servicing the tug during launch countdown, flight, and postlanding; deploying and retrieving the tug on orbit; and maintaining control over the tug when it is in or near the orbiter. Each of these interface areas was investigated to determine the best physical and operational method of accomplishing the required functions, with an overriding goal of establishing simple and flexible orbiter interface requirements suitable for tug, tug payloads, IUS and other cargo. It is concluded the orbiter payload accommodations and the MSFC baseline tug are generally interface compatible. Specific minor changes to tug and orbiter interfaces were identified to provide full compatibility. A system concept for supporting and deploying tug from orbiter is described.

Applying representational state transfer (REST) architecture to archetype-based electronic health record systems

PubMed Central

2013-01-01

Background The openEHR project and the closely related ISO 13606 standard have defined structures supporting the content of Electronic Health Records (EHRs). However, there is not yet any finalized openEHR specification of a service interface to aid application developers in creating, accessing, and storing the EHR content. The aim of this paper is to explore how the Representational State Transfer (REST) architectural style can be used as a basis for a platform-independent, HTTP-based openEHR service interface. Associated benefits and tradeoffs of such a design are also explored. Results The main contribution is the formalization of the openEHR storage, retrieval, and version-handling semantics and related services into an implementable HTTP-based service interface. The modular design makes it possible to prototype, test, replicate, distribute, cache, and load-balance the system using ordinary web technology. Other contributions are approaches to query and retrieval of the EHR content that takes caching, logging, and distribution into account. Triggering on EHR change events is also explored. A final contribution is an open source openEHR implementation using the above-mentioned approaches to create LiU EEE, an educational EHR environment intended to help newcomers and developers experiment with and learn about the archetype-based EHR approach and enable rapid prototyping. Conclusions Using REST addressed many architectural concerns in a successful way, but an additional messaging component was needed to address some architectural aspects. Many of our approaches are likely of value to other archetype-based EHR implementations and may contribute to associated service model specifications. PMID:23656624

Applying representational state transfer (REST) architecture to archetype-based electronic health record systems.

PubMed

Sundvall, Erik; Nyström, Mikael; Karlsson, Daniel; Eneling, Martin; Chen, Rong; Örman, Håkan

2013-05-09

The openEHR project and the closely related ISO 13606 standard have defined structures supporting the content of Electronic Health Records (EHRs). However, there is not yet any finalized openEHR specification of a service interface to aid application developers in creating, accessing, and storing the EHR content.The aim of this paper is to explore how the Representational State Transfer (REST) architectural style can be used as a basis for a platform-independent, HTTP-based openEHR service interface. Associated benefits and tradeoffs of such a design are also explored. The main contribution is the formalization of the openEHR storage, retrieval, and version-handling semantics and related services into an implementable HTTP-based service interface. The modular design makes it possible to prototype, test, replicate, distribute, cache, and load-balance the system using ordinary web technology. Other contributions are approaches to query and retrieval of the EHR content that takes caching, logging, and distribution into account. Triggering on EHR change events is also explored.A final contribution is an open source openEHR implementation using the above-mentioned approaches to create LiU EEE, an educational EHR environment intended to help newcomers and developers experiment with and learn about the archetype-based EHR approach and enable rapid prototyping. Using REST addressed many architectural concerns in a successful way, but an additional messaging component was needed to address some architectural aspects. Many of our approaches are likely of value to other archetype-based EHR implementations and may contribute to associated service model specifications.

Design of RCSS

PubMed Central

Strum, David P.; Vargas, Luis G.; May, Jerrold H.

1997-01-01

Abstract The plans for Resource Coordination for Surgical Services system (RCSS) incorporate a distributed objectbase with a coordinating server. User-centered information screens are customized for each geographic location in surgical services. User interfaces are designed to mimic paper lists and worksheets used by health care providers. Patient-specific and site-specific data will be entered and maintained by providers at each geographic location, but also rebroadcast and displayed for all providers. Although RCSS is primarily a communications system, it will also support review of surgical utilization and operative scheduling. PMID:9067878

An Open Specification for Space Project Mission Operations Control Architectures

NASA Technical Reports Server (NTRS)

Hooke, A.; Heuser, W. R.

1995-01-01

An 'open specification' for Space Project Mission Operations Control Architectures is under development in the Spacecraft Control Working Group of the American Institute for Aeronautics and Astro- nautics. This architecture identifies 5 basic elements incorporated in the design of similar operations systems: Data, System Management, Control Interface, Decision Support Engine, & Space Messaging Service.

Design for Connecting Spatial Data Infrastructures with Sensor Web (sensdi)

NASA Astrophysics Data System (ADS)

Bhattacharya, D.; M., M.

2016-06-01

Integrating Sensor Web With Spatial Data Infrastructures (SENSDI) aims to extend SDIs with sensor web enablement, converging geospatial and built infrastructure, and implement test cases with sensor data and SDI. It is about research to harness the sensed environment by utilizing domain specific sensor data to create a generalized sensor webframework. The challenges being semantic enablement for Spatial Data Infrastructures, and connecting the interfaces of SDI with interfaces of Sensor Web. The proposed research plan is to Identify sensor data sources, Setup an open source SDI, Match the APIs and functions between Sensor Web and SDI, and Case studies like hazard applications, urban applications etc. We take up co-operative development of SDI best practices to enable a new realm of a location enabled and semantically enriched World Wide Web - the "Geospatial Web" or "Geosemantic Web" by setting up one to one correspondence between WMS, WFS, WCS, Metadata and 'Sensor Observation Service' (SOS); 'Sensor Planning Service' (SPS); 'Sensor Alert Service' (SAS); a service that facilitates asynchronous message interchange between users and services, and between two OGC-SWE services, called the 'Web Notification Service' (WNS). Hence in conclusion, it is of importance to geospatial studies to integrate SDI with Sensor Web. The integration can be done through merging the common OGC interfaces of SDI and Sensor Web. Multi-usability studies to validate integration has to be undertaken as future research.

Vocabulary services to support scientific data interoperability

NASA Astrophysics Data System (ADS)

Cox, Simon; Mills, Katie; Tan, Florence

2013-04-01

Shared vocabularies are a core element in interoperable systems. Vocabularies need to be available at run-time, and where the vocabularies are shared by a distributed community this implies the use of web technology to provide vocabulary services. Given the ubiquity of vocabularies or classifiers in systems, vocabulary services are effectively the base of the interoperability stack. In contemporary knowledge organization systems, a vocabulary item is considered a concept, with the "terms" denoting it appearing as labels. The Simple Knowledge Organization System (SKOS) formalizes this as an RDF Schema (RDFS) application, with a bridge to formal logic in Web Ontology Language (OWL). For maximum utility, a vocabulary should be made available through the following interfaces: * the vocabulary as a whole - at an ontology URI corresponding to a vocabulary document * each item in the vocabulary - at the item URI * summaries, subsets, and resources derived by transformation * through the standard RDF web API - i.e. a SPARQL endpoint * through a query form for human users. However, the vocabulary data model may be leveraged directly in a standard vocabulary API that uses the semantics provided by SKOS. SISSvoc3 [1] accomplishes this as a standard set of URI templates for a vocabulary. Any URI comforming to the template selects a vocabulary subset based on the SKOS properties, including labels (skos:prefLabel, skos:altLabel, rdfs:label) and a subset of the semantic relations (skos:broader, skos:narrower, etc). SISSvoc3 thus provides a RESTFul SKOS API to query a vocabulary, but hiding the complexity of SPARQL. It has been implemented using the Linked Data API (LDA) [2], which connects to a SPARQL endpoint. By using LDA, we also get content-negotiation, alternative views, paging, metadata and other functionality provided in a standard way. A number of vocabularies have been formalized in SKOS and deployed by CSIRO, the Australian Bureau of Meteorology (BOM) and their collaborators using SISSvoc3, including: * geologic timescale (multiple versions) * soils classification * definitions from OGC standards * geosciml vocabularies * mining commodities * hyperspectral scalars Several other agencies in Australia have adopted SISSvoc3 for their vocabularies. SISSvoc3 differs from other SKOS-based vocabulary-access APIs such as GEMET [3] and NVS [4] in that (a) the service is decoupled from the content store, (b) the service URI is independent of the content URIs This means that a SISSvoc3 interface can be deployed over any SKOS vocabulary which is available at a SPARQL endpoint. As an example, a SISSvoc3 query and presentation interface has been deployed over the NERC vocabulary service hosted by the BODC, providing a search interface which is not available natively. We use vocabulary services to populate menus in user interfaces, to support data validation, and to configure data conversion routines. Related services built on LDA have also been used as a generic registry interface, and extended for serving gazetteer information. ACKNOWLEDGEMENTS The CSIRO SISSvoc3 implementation is built using the Epimorphics ELDA platform http://code.google.com/p/elda/. We thank Jacqui Githaiga and Terry Rankine for their contributions to SISSvoc design and implementation. REFERENCES 1. SISSvoc3 Specification https://www.seegrid.csiro.au/wiki/Siss/SISSvoc30Specification 2. Linked Data API http://code.google.com/p/linked-data-api/wiki/Specification 3. GEMET https://svn.eionet.europa.eu/projects/Zope/wiki/GEMETWebServiceAPI 4. NVS 2.0 http://vocab.nerc.ac.uk/

Cool Apps: Building Cryospheric Data Applications With Standards-Based Service Oriented Architecture

NASA Astrophysics Data System (ADS)

Collins, J. A.; Truslove, I.; Billingsley, B. W.; Oldenburg, J.; Brodzik, M.; Lewis, S.; Liu, M.

2012-12-01

The National Snow and Ice Data Center (NSIDC) holds a large collection of cryospheric data, and is involved in a number of informatics research and development projects aimed at improving the discoverability and accessibility of these data. To develop high-quality software in a timely manner, we have adopted a Service-Oriented Architecture (SOA) approach for our core technical infrastructure development. Data services at NSIDC are internally exposed to other tools and applications through standards-based service interfaces. These standards include OAI-PMH (Open Archives Initiative Protocol for Metadata Harvesting), various OGC (Open Geospatial Consortium) standards including WMS (Web Map Service) and WFS (Web Feature Service), ESIP (Federation of Earth Sciences Information Partners) OpenSearch, and NSIDC-specific RESTful services. By taking a standards-based approach, we are able to use off-the-shelf tools and libraries to consume, translate and broker these data services, and thus develop applications faster. Additionally, by exposing public interfaces to these services we provide valuable data services to technical collaborators; for example, NASA Reverb (http://reverb.echo.nasa.gov) uses NSIDC's WMS services. Our latest generation of web applications consume these data services directly. The most complete example of this is the Operation IceBridge Data Portal (http://nsidc.org/icebridge/portal) which depends on many of the aforementioned services, and clearly exhibits many of the advantages of building applications atop a service-oriented architecture. This presentation outlines the architectural approach and components and open standards and protocols adopted at NSIDC, demonstrates the interactions and uses of public and internal service interfaces currently powering applications including the IceBridge Data Portal, and outlines the benefits and challenges of this approach.

A generic archive protocol and an implementation

NASA Technical Reports Server (NTRS)

Jordan, J. M.; Jennings, D. G.; Mcglynn, T. A.; Ruggiero, N. G.; Serlemitsos, T. A.

1992-01-01

Archiving vast amounts of data has become a major part of every scientific space mission today. The Generic Archive/Retrieval Services Protocol (GRASP) addresses the question of how to archive the data collected in an environment where the underlying hardware archives may be rapidly changing. GRASP is a device independent specification defining a set of functions for storing and retrieving data from an archive, as well as other support functions. GRASP is divided into two levels: the Transfer Interface and the Action Interface. The Transfer Interface is computer/archive independent code while the Action Interface contains code which is dedicated to each archive/computer addressed. Implementations of the GRASP specification are currently available for DECstations running Ultrix, Sparcstations running SunOS, and microVAX/VAXstation 3100's. The underlying archive is assumed to function as a standard Unix or VMS file system. The code, written in C, is a single suite of files. Preprocessing commands define the machine unique code sections in the device interface. The implementation was written, to the greatest extent possible, using only ANSI standard C functions.

Development of RESTful services and map-based user interface tools for access and delivery of data and metadata from the Marine-Geo Digital Library

NASA Astrophysics Data System (ADS)

Morton, J. J.; Ferrini, V. L.

2015-12-01

The Marine Geoscience Data System (MGDS, www.marine-geo.org) operates an interactive digital data repository and metadata catalog that provides access to a variety of marine geology and geophysical data from throughout the global oceans. Its Marine-Geo Digital Library includes common marine geophysical data types and supporting data and metadata, as well as complementary long-tail data. The Digital Library also includes community data collections and custom data portals for the GeoPRISMS, MARGINS and Ridge2000 programs, for active source reflection data (Academic Seismic Portal), and for marine data acquired by the US Antarctic Program (Antarctic and Southern Ocean Data Portal). Ensuring that these data are discoverable not only through our own interfaces but also through standards-compliant web services is critical for enabling investigators to find data of interest.Over the past two years, MGDS has developed several new RESTful web services that enable programmatic access to metadata and data holdings. These web services are compliant with the EarthCube GeoWS Building Blocks specifications and are currently used to drive our own user interfaces. New web applications have also been deployed to provide a more intuitive user experience for searching, accessing and browsing metadata and data. Our new map-based search interface combines components of the Google Maps API with our web services for dynamic searching and exploration of geospatially constrained data sets. Direct introspection of nearly all data formats for hundreds of thousands of data files curated in the Marine-Geo Digital Library has allowed for precise geographic bounds, which allow geographic searches to an extent not previously possible. All MGDS map interfaces utilize the web services of the Global Multi-Resolution Topography (GMRT) synthesis for displaying global basemap imagery and for dynamically provide depth values at the cursor location.

SHINE: Strategic Health Informatics Networks for Europe.

PubMed

Kruit, D; Cooper, P A

1994-10-01

The mission of SHINE is to construct an open systems framework for the development of regional community healthcare telematic services that support and add to the strategic business objectives of European healthcare providers and purchasers. This framework will contain a Methodology, that identifies healthcare business processes and develops a supporting IT strategy, and the Open Health Environment. This consists of an architecture and information standards that are 'open' and will be available to any organisation wishing to construct SHINE conform regional healthcare telematic services. Results are: generic models, e.g., regional healthcare business networks, IT strategies; demonstrable, e.g., pilot demonstrators, application and service prototypes; reports, e.g., SHINE Methodology, pilot specifications & evaluations; proposals, e.g., service/interface specifications, standards conformance.

Exploiting the Multi-Service Domain Protecting Interface

DTIC Science & Technology

2012-10-17

Linux OpenVPN and IPSec VLAN services subsystems. Essentially, MSDPI becomes the transport mechanism for these subsystems. For the RIB, LSP, and...includes those necessary files to build a complete LiveCD system For example, adding various configuration files: ifcfg-eth?, ifcfg-ib?, openvpn ...aka IP address), openvpn files, specific files in the etc/sysconfig directory. %prep %build %install rm -rf $RPM_BUILD_ROOT mkdir -p

Formal design specification of a Processor Interface Unit

NASA Technical Reports Server (NTRS)

Fura, David A.; Windley, Phillip J.; Cohen, Gerald C.

1992-01-01

This report describes work to formally specify the requirements and design of a processor interface unit (PIU), a single-chip subsystem providing memory-interface bus-interface, and additional support services for a commercial microprocessor within a fault-tolerant computer system. This system, the Fault-Tolerant Embedded Processor (FTEP), is targeted towards applications in avionics and space requiring extremely high levels of mission reliability, extended maintenance-free operation, or both. The need for high-quality design assurance in such applications is an undisputed fact, given the disastrous consequences that even a single design flaw can produce. Thus, the further development and application of formal methods to fault-tolerant systems is of critical importance as these systems see increasing use in modern society.

E-MSD: an integrated data resource for bioinformatics.

PubMed

Golovin, A; Oldfield, T J; Tate, J G; Velankar, S; Barton, G J; Boutselakis, H; Dimitropoulos, D; Fillon, J; Hussain, A; Ionides, J M C; John, M; Keller, P A; Krissinel, E; McNeil, P; Naim, A; Newman, R; Pajon, A; Pineda, J; Rachedi, A; Copeland, J; Sitnov, A; Sobhany, S; Suarez-Uruena, A; Swaminathan, G J; Tagari, M; Tromm, S; Vranken, W; Henrick, K

2004-01-01

The Macromolecular Structure Database (MSD) group (http://www.ebi.ac.uk/msd/) continues to enhance the quality and consistency of macromolecular structure data in the Protein Data Bank (PDB) and to work towards the integration of various bioinformatics data resources. We have implemented a simple form-based interface that allows users to query the MSD directly. The MSD 'atlas pages' show all of the information in the MSD for a particular PDB entry. The group has designed new search interfaces aimed at specific areas of interest, such as the environment of ligands and the secondary structures of proteins. We have also implemented a novel search interface that begins to integrate separate MSD search services in a single graphical tool. We have worked closely with collaborators to build a new visualization tool that can present both structure and sequence data in a unified interface, and this data viewer is now used throughout the MSD services for the visualization and presentation of search results. Examples showcasing the functionality and power of these tools are available from tutorial webpages (http://www. ebi.ac.uk/msd-srv/docs/roadshow_tutorial/).

E-MSD: an integrated data resource for bioinformatics

PubMed Central

Golovin, A.; Oldfield, T. J.; Tate, J. G.; Velankar, S.; Barton, G. J.; Boutselakis, H.; Dimitropoulos, D.; Fillon, J.; Hussain, A.; Ionides, J. M. C.; John, M.; Keller, P. A.; Krissinel, E.; McNeil, P.; Naim, A.; Newman, R.; Pajon, A.; Pineda, J.; Rachedi, A.; Copeland, J.; Sitnov, A.; Sobhany, S.; Suarez-Uruena, A.; Swaminathan, G. J.; Tagari, M.; Tromm, S.; Vranken, W.; Henrick, K.

2004-01-01

The Macromolecular Structure Database (MSD) group (http://www.ebi.ac.uk/msd/) continues to enhance the quality and consistency of macromolecular structure data in the Protein Data Bank (PDB) and to work towards the integration of various bioinformatics data resources. We have implemented a simple form-based interface that allows users to query the MSD directly. The MSD ‘atlas pages’ show all of the information in the MSD for a particular PDB entry. The group has designed new search interfaces aimed at specific areas of interest, such as the environment of ligands and the secondary structures of proteins. We have also implemented a novel search interface that begins to integrate separate MSD search services in a single graphical tool. We have worked closely with collaborators to build a new visualization tool that can present both structure and sequence data in a unified interface, and this data viewer is now used throughout the MSD services for the visualization and presentation of search results. Examples showcasing the functionality and power of these tools are available from tutorial webpages (http://www.ebi.ac.uk/msd-srv/docs/roadshow_tutorial/). PMID:14681397

Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 5: PEP environmental specification

NASA Technical Reports Server (NTRS)

1979-01-01

This specification establishes the natural and induced environments to which the power extension package may be exposed during ground operations and space operations with the shuttle system. Space induced environments are applicable at the Orbiter attach point interface location. All probable environments are systematically listed according to each ground and mission phase.

Earthdata User Interface Patterns: Building Usable Web Interfaces Through a Shared UI Pattern Library

NASA Astrophysics Data System (ADS)

Siarto, J.

2014-12-01

As more Earth science software tools and services move to the web--the design and usability of those tools become ever more important. A good user interface is becoming expected and users are becoming increasingly intolerant of websites and web applications that work against them. The Earthdata UI Pattern Library attempts to give these scientists and developers the design tools they need to make usable, compelling user interfaces without the associated overhead of using a full design team. Patterns are tested and functional user interface elements targeted specifically at the Earth science community and will include web layouts, buttons, tables, typography, iconography, mapping and visualization/graphing widgets. These UI elements have emerged as the result of extensive user testing, research and software development within the NASA Earthdata team over the past year.

Whither the White Knight: CDROM in Technical Services.

ERIC Educational Resources Information Center

Campbell, Brian

1987-01-01

Outlines evaluative criteria and compares optical data disk products used in library technical processes, including bibliographic records for cataloging, acquisition databases, and local public access catalogs. An extensive table provides information on specific products, including updates, interfaces, edit screens, installation help, manuals,…

Robot services for elderly with cognitive impairment: testing usability of graphical user interfaces.

PubMed

Granata, C; Pino, M; Legouverneur, G; Vidal, J-S; Bidaud, P; Rigaud, A-S

2013-01-01

Socially assistive robotics for elderly care is a growing field. However, although robotics has the potential to support elderly in daily tasks by offering specific services, the development of usable interfaces is still a challenge. Since several factors such as age or disease-related changes in perceptual or cognitive abilities and familiarity with computer technologies influence technology use they must be considered when designing interfaces for these users. This paper presents findings from usability testing of two different services provided by a social assistive robot intended for elderly with cognitive impairment: a grocery shopping list and an agenda application. The main goal of this study is to identify the usability problems of the robot interface for target end-users as well as to isolate the human factors that affect the use of the technology by elderly. Socio-demographic characteristics and computer experience were examined as factors that could have an influence on task performance. A group of 11 elderly persons with Mild Cognitive Impairment and a group of 11 cognitively healthy elderly individuals took part in this study. Performance measures (task completion time and number of errors) were collected. Cognitive profile, age and computer experience were found to impact task performance. Participants with cognitive impairment achieved the tasks committing more errors than cognitively healthy elderly. Instead younger participants and those with previous computer experience were faster at completing the tasks confirming previous findings in the literature. The overall results suggested that interfaces and contents of the services assessed were usable by older adults with cognitive impairment. However, some usability problems were identified and should be addressed to better meet the needs and capacities of target end-users.

Department of Defense Air Traffic Control and Airspace Systems Interface with the National Airspace System

DTIC Science & Technology

1990-03-30

systems on the DoD in terms of safety and operational- effectiveness and probable impacts on specific Air Force mission requirements. The report does... Systems ................................. 2-21 2.1.3 Flight Service and Weather Systems .......................... 2-22 2.1.3.1 Flight Service Automation...2-41 2.2.2 Terminal Control and Landing Systems .. ....................... 2-44 2.2.3 Flight Information and Weather Systems

A new reference implementation of the PSICQUIC web service.

PubMed

del-Toro, Noemi; Dumousseau, Marine; Orchard, Sandra; Jimenez, Rafael C; Galeota, Eugenia; Launay, Guillaume; Goll, Johannes; Breuer, Karin; Ono, Keiichiro; Salwinski, Lukasz; Hermjakob, Henning

2013-07-01

The Proteomics Standard Initiative Common QUery InterfaCe (PSICQUIC) specification was created by the Human Proteome Organization Proteomics Standards Initiative (HUPO-PSI) to enable computational access to molecular-interaction data resources by means of a standard Web Service and query language. Currently providing >150 million binary interaction evidences from 28 servers globally, the PSICQUIC interface allows the concurrent search of multiple molecular-interaction information resources using a single query. Here, we present an extension of the PSICQUIC specification (version 1.3), which has been released to be compliant with the enhanced standards in molecular interactions. The new release also includes a new reference implementation of the PSICQUIC server available to the data providers. It offers augmented web service capabilities and improves the user experience. PSICQUIC has been running for almost 5 years, with a user base growing from only 4 data providers to 28 (April 2013) allowing access to 151 310 109 binary interactions. The power of this web service is shown in PSICQUIC View web application, an example of how to simultaneously query, browse and download results from the different PSICQUIC servers. This application is free and open to all users with no login requirement (http://www.ebi.ac.uk/Tools/webservices/psicquic/view/main.xhtml).

Mercury: An Example of Effective Software Reuse for Metadata Management, Data Discovery and Access

NASA Astrophysics Data System (ADS)

Devarakonda, Ranjeet; Palanisamy, Giri; Green, James; Wilson, Bruce E.

2008-12-01

Mercury is a federated metadata harvesting, data discovery and access tool based on both open source packages and custom developed software. Though originally developed for NASA, the Mercury development consortium now includes funding from NASA, USGS, and DOE. Mercury supports the reuse of metadata by enabling searching across a range of metadata specification and standards including XML, Z39.50, FGDC, Dublin-Core, Darwin-Core, EML, and ISO-19115. Mercury provides a single portal to information contained in distributed data management systems. It collects metadata and key data from contributing project servers distributed around the world and builds a centralized index. The Mercury search interfaces then allow the users to perform simple, fielded, spatial and temporal searches across these metadata sources. One of the major goals of the recent redesign of Mercury was to improve the software reusability across the 12 projects which currently fund the continuing development of Mercury. These projects span a range of land, atmosphere, and ocean ecological communities and have a number of common needs for metadata searches, but they also have a number of needs specific to one or a few projects. To balance these common and project-specific needs, Mercury's architecture has three major reusable components; a harvester engine, an indexing system and a user interface component. The harvester engine is responsible for harvesting metadata records from various distributed servers around the USA and around the world. The harvester software was packaged in such a way that all the Mercury projects will use the same harvester scripts but each project will be driven by a set of project specific configuration files. The harvested files are structured metadata records that are indexed against the search library API consistently, so that it can render various search capabilities such as simple, fielded, spatial and temporal. This backend component is supported by a very flexible, easy to use Graphical User Interface which is driven by cascading style sheets, which make it even simpler for reusable design implementation. The new Mercury system is based on a Service Oriented Architecture and effectively reuses components for various services such as Thesaurus Service, Gazetteer Web Service and UDDI Directory Services. The software also provides various search services including: RSS, Geo-RSS, OpenSearch, Web Services and Portlets, integrated shopping cart to order datasets from various data centers (ORNL DAAC, NSIDC) and integrated visualization tools. Other features include: Filtering and dynamic sorting of search results, book- markable search results, save, retrieve, and modify search criteria.

Analysis Tool Web Services from the EMBL-EBI.

PubMed

McWilliam, Hamish; Li, Weizhong; Uludag, Mahmut; Squizzato, Silvano; Park, Young Mi; Buso, Nicola; Cowley, Andrew Peter; Lopez, Rodrigo

2013-07-01

Since 2004 the European Bioinformatics Institute (EMBL-EBI) has provided access to a wide range of databases and analysis tools via Web Services interfaces. This comprises services to search across the databases available from the EMBL-EBI and to explore the network of cross-references present in the data (e.g. EB-eye), services to retrieve entry data in various data formats and to access the data in specific fields (e.g. dbfetch), and analysis tool services, for example, sequence similarity search (e.g. FASTA and NCBI BLAST), multiple sequence alignment (e.g. Clustal Omega and MUSCLE), pairwise sequence alignment and protein functional analysis (e.g. InterProScan and Phobius). The REST/SOAP Web Services (http://www.ebi.ac.uk/Tools/webservices/) interfaces to these databases and tools allow their integration into other tools, applications, web sites, pipeline processes and analytical workflows. To get users started using the Web Services, sample clients are provided covering a range of programming languages and popular Web Service tool kits, and a brief guide to Web Services technologies, including a set of tutorials, is available for those wishing to learn more and develop their own clients. Users of the Web Services are informed of improvements and updates via a range of methods.

Analysis Tool Web Services from the EMBL-EBI

PubMed Central

McWilliam, Hamish; Li, Weizhong; Uludag, Mahmut; Squizzato, Silvano; Park, Young Mi; Buso, Nicola; Cowley, Andrew Peter; Lopez, Rodrigo

2013-01-01

Since 2004 the European Bioinformatics Institute (EMBL-EBI) has provided access to a wide range of databases and analysis tools via Web Services interfaces. This comprises services to search across the databases available from the EMBL-EBI and to explore the network of cross-references present in the data (e.g. EB-eye), services to retrieve entry data in various data formats and to access the data in specific fields (e.g. dbfetch), and analysis tool services, for example, sequence similarity search (e.g. FASTA and NCBI BLAST), multiple sequence alignment (e.g. Clustal Omega and MUSCLE), pairwise sequence alignment and protein functional analysis (e.g. InterProScan and Phobius). The REST/SOAP Web Services (http://www.ebi.ac.uk/Tools/webservices/) interfaces to these databases and tools allow their integration into other tools, applications, web sites, pipeline processes and analytical workflows. To get users started using the Web Services, sample clients are provided covering a range of programming languages and popular Web Service tool kits, and a brief guide to Web Services technologies, including a set of tutorials, is available for those wishing to learn more and develop their own clients. Users of the Web Services are informed of improvements and updates via a range of methods. PMID:23671338

System and Method for Providing a Climate Data Analytic Services Application Programming Interface Distribution Package

NASA Technical Reports Server (NTRS)

Tamkin, Glenn S. (Inventor); Duffy, Daniel Q. (Inventor); Schnase, John L. (Inventor)

2016-01-01

A system, method and computer-readable storage devices for providing a climate data analytic services application programming interface distribution package. The example system can provide various components. The system provides a climate data analytic services application programming interface library that enables software applications running on a client device to invoke the capabilities of a climate data analytic service. The system provides a command-line interface that provides a means of interacting with a climate data analytic service by issuing commands directly to the system's server interface. The system provides sample programs that call on the capabilities of the application programming interface library and can be used as templates for the construction of new client applications. The system can also provide test utilities, build utilities, service integration utilities, and documentation.

Implementing Ethernet Services on the Payload Executive Processor (PEP)

NASA Technical Reports Server (NTRS)

Pruett, David; Guyette, Greg

2016-01-01

The Ethernet interface is more common and easier interface to implement for payload developers already familiar with Ethernet protocol in their labs. The Ethernet interface allows for a more distributed payload architecture. Connections can be placed in locations not serviced by the PEP 1553 bus. The Ethernet interface provides a new access port into the PEP so as to use the already existing services. Initial capability will include a subset of services with a plan to expand services later.

Advanced information processing system: Input/output system services

NASA Technical Reports Server (NTRS)

Masotto, Tom; Alger, Linda

1989-01-01

The functional requirements and detailed specifications for the Input/Output (I/O) Systems Services of the Advanced Information Processing System (AIPS) are discussed. The introductory section is provided to outline the overall architecture and functional requirements of the AIPS system. Section 1.1 gives a brief overview of the AIPS architecture as well as a detailed description of the AIPS fault tolerant network architecture, while section 1.2 provides an introduction to the AIPS systems software. Sections 2 and 3 describe the functional requirements and design and detailed specifications of the I/O User Interface and Communications Management modules of the I/O System Services, respectively. Section 4 illustrates the use of the I/O System Services, while Section 5 concludes with a summary of results and suggestions for future work in this area.

SOA approach to battle command: simulation interoperability

NASA Astrophysics Data System (ADS)

Mayott, Gregory; Self, Mid; Miller, Gordon J.; McDonnell, Joseph S.

2010-04-01

NVESD is developing a Sensor Data and Management Services (SDMS) Service Oriented Architecture (SOA) that provides an innovative approach to achieve seamless application functionality across simulation and battle command systems. In 2010, CERDEC will conduct a SDMS Battle Command demonstration that will highlight the SDMS SOA capability to couple simulation applications to existing Battle Command systems. The demonstration will leverage RDECOM MATREX simulation tools and TRADOC Maneuver Support Battle Laboratory Virtual Base Defense Operations Center facilities. The battle command systems are those specific to the operation of a base defense operations center in support of force protection missions. The SDMS SOA consists of four components that will be discussed. An Asset Management Service (AMS) will automatically discover the existence, state, and interface definition required to interact with a named asset (sensor or a sensor platform, a process such as level-1 fusion, or an interface to a sensor or other network endpoint). A Streaming Video Service (SVS) will automatically discover the existence, state, and interfaces required to interact with a named video stream, and abstract the consumers of the video stream from the originating device. A Task Manager Service (TMS) will be used to automatically discover the existence of a named mission task, and will interpret, translate and transmit a mission command for the blue force unit(s) described in a mission order. JC3IEDM data objects, and software development kit (SDK), will be utilized as the basic data object definition for implemented web services.

The Live Access Server Scientific Product Generation Through Workflow Orchestration

NASA Astrophysics Data System (ADS)

Hankin, S.; Calahan, J.; Li, J.; Manke, A.; O'Brien, K.; Schweitzer, R.

2006-12-01

The Live Access Server (LAS) is a well-established Web-application for display and analysis of geo-science data sets. The software, which can be downloaded and installed by anyone, gives data providers an easy way to establish services for their on-line data holdings, so their users can make plots; create and download data sub-sets; compare (difference) fields; and perform simple analyses. Now at version 7.0, LAS has been in operation since 1994. The current "Armstrong" release of LAS V7 consists of three components in a tiered architecture: user interface, workflow orchestration and Web Services. The LAS user interface (UI) communicates with the LAS Product Server via an XML protocol embedded in an HTTP "get" URL. Libraries (APIs) have been developed in Java, JavaScript and perl that can readily generate this URL. As a result of this flexibility it is common to find LAS user interfaces of radically different character, tailored to the nature of specific datasets or the mindset of specific users. When a request is received by the LAS Product Server (LPS -- the workflow orchestration component), business logic converts this request into a series of Web Service requests invoked via SOAP. These "back- end" Web services perform data access and generate products (visualizations, data subsets, analyses, etc.). LPS then packages these outputs into final products (typically HTML pages) via Jakarta Velocity templates for delivery to the end user. "Fine grained" data access is performed by back-end services that may utilize JDBC for data base access; the OPeNDAP "DAPPER" protocol; or (in principle) the OGC WFS protocol. Back-end visualization services are commonly legacy science applications wrapped in Java or Python (or perl) classes and deployed as Web Services accessible via SOAP. Ferret is the default visualization application used by LAS, though other applications such as Matlab, CDAT, and GrADS can also be used. Other back-end services may include generation of Google Earth layers using KML; generation of maps via WMS or ArcIMS protocols; and data manipulation with Unix utilities.

Determining Appropriate Coupling between User Experiences and Earth Science Data Services

NASA Astrophysics Data System (ADS)

Moghaddam-Taaheri, E.; Pilone, D.; Newman, D. J.; Mitchell, A. E.; Goff, T. D.; Baynes, K.

2012-12-01

NASA's Earth Observing System ClearingHOuse (ECHO) is a format agnostic metadata repository supporting over 3000 collections and 100M granules. ECHO exposes FTP and RESTful Data Ingest APIs in addition to both SOAP and RESTful search and order capabilities. Built on top of ECHO is a human facing search and order web application named Reverb. Reverb exposes ECHO's capabilities through an interactive, Web 2.0 application designed around searching for Earth Science data and downloading or ordering data of interest. ECHO and Reverb have supported the concept of Earth Science data services for several years but only for discovery. Invocation of these services was not a primary capability of the user experience. As more and more Earth Science data moves online and away from the concept of data ordering, progress has been made in making on demand services available for directly accessed data. These concepts have existed through access mechanisms such as OPeNDAP but are proliferating to accommodate a wider variety of services and service providers. Recently, the EOSDIS Service Interface (ESI) was defined and integrated into the ECS system. The ESI allows data providers to expose a wide variety of service capabilities including reprojection, reformatting, spatial and band subsetting, and resampling. ECHO and Reverb were tasked with making these services available to end-users in a meaningful and usable way that integrated into its existing search and ordering workflow. This presentation discusses the challenges associated with exposing disparate service capabilities while presenting a meaningful and cohesive user experience. Specifically, we'll discuss: - Benefits and challenges of tightly coupling the user interface with underlying services - Approaches to generic service descriptions - Approaches to dynamic user interfaces that better describe service capabilities while minimizing application coupling - Challenges associated with traditional WSDL / UDDI style service descriptions - Walkthrough of the solution used by ECHO and Reverb to integrate and expose ESI compliant services to our users

Gesture-Controlled Interfaces for Self-Service Machines

NASA Technical Reports Server (NTRS)

Cohen, Charles J.; Beach, Glenn

2006-01-01

Gesture-controlled interfaces are software- driven systems that facilitate device control by translating visual hand and body signals into commands. Such interfaces could be especially attractive for controlling self-service machines (SSMs) for example, public information kiosks, ticket dispensers, gasoline pumps, and automated teller machines (see figure). A gesture-controlled interface would include a vision subsystem comprising one or more charge-coupled-device video cameras (at least two would be needed to acquire three-dimensional images of gestures). The output of the vision system would be processed by a pure software gesture-recognition subsystem. Then a translator subsystem would convert a sequence of recognized gestures into commands for the SSM to be controlled; these could include, for example, a command to display requested information, change control settings, or actuate a ticket- or cash-dispensing mechanism. Depending on the design and operational requirements of the SSM to be controlled, the gesture-controlled interface could be designed to respond to specific static gestures, dynamic gestures, or both. Static and dynamic gestures can include stationary or moving hand signals, arm poses or motions, and/or whole-body postures or motions. Static gestures would be recognized on the basis of their shapes; dynamic gestures would be recognized on the basis of both their shapes and their motions. Because dynamic gestures include temporal as well as spatial content, this gesture- controlled interface can extract more information from dynamic than it can from static gestures.

Project Ukko - Design of a climate service visualisation interface for seasonal wind forecasts

NASA Astrophysics Data System (ADS)

Hemment, Drew; Stefaner, Moritz; Makri, Stephann; Buontempo, Carlo; Christel, Isadora; Torralba-Fernandez, Veronica; Gonzalez-Reviriego, Nube; Doblas-Reyes, Francisco; de Matos, Paula; Dykes, Jason

2016-04-01

Project Ukko is a prototype climate service to visually communicate probabilistic seasonal wind forecasts for the energy sector. In Project Ukko, an interactive visualisation enhances the accessibility and readability to the latests advances in seasonal wind speed predictions developed as part of the RESILIENCE prototype of the EUPORIAS (EC FP7) project. Climate services provide made-to-measure climate information, tailored to the specific requirements of different users and industries. In the wind energy sector, understanding of wind conditions in the next few months has high economic value, for instance, for the energy traders. Current energy practices use retrospective climatology, but access to reliable seasonal predictions based in the recent advances in global climate models has potential to improve their resilience to climate variability and change. Despite their potential benefits, a barrier to the development of commercially viable services is the complexity of the probabilistic forecast information, and the challenge of communicating complex and uncertain information to decision makers in industry. Project Ukko consists of an interactive climate service interface for wind energy users to explore probabilistic wind speed predictions for the coming season. This interface enables fast visual detection and exploration of interesting features and regions likely to experience unusual changes in wind speed in the coming months.The aim is not only to support users to better understand the future variability in wind power resources, but also to bridge the gap between practitioners' traditional approach and the advanced prediction systems developed by the climate science community. Project Ukko is presented as a case study of cross-disciplinary collaboration between climate science and design, for the development of climate services that are useful, usable and effective for industry users. The presentation will reflect on the challenge of developing a climate service for industry users in the wind energy sector, the background to this challenge, our approach, and the evaluation of the visualisation interface.

Launching an EarthCube Interoperability Workbench for Constructing Workflows and Employing Service Interfaces

NASA Astrophysics Data System (ADS)

Fulker, D. W.; Pearlman, F.; Pearlman, J.; Arctur, D. K.; Signell, R. P.

2016-12-01

A major challenge for geoscientists—and a key motivation for the National Science Foundation's EarchCube initiative—is to integrate data across disciplines, as is necessary for complex Earth-system studies such as climate change. The attendant technical and social complexities have led EarthCube participants to devise a system-of-systems architectural concept. Its centerpiece is a (virtual) interoperability workbench, around which a learning community can coalesce, supported in their evolving quests to join data from diverse sources, to synthesize new forms of data depicting Earth phenomena, and to overcome immense obstacles that arise, for example, from mismatched nomenclatures, projections, mesh geometries and spatial-temporal scales. The full architectural concept will require significant time and resources to implement, but this presentation describes a (minimal) starter kit. With a keep-it-simple mantra this workbench starter kit can fulfill the following four objectives: 1) demonstrate the feasibility of an interoperability workbench by mid-2017; 2) showcase scientifically useful examples of cross-domain interoperability, drawn, e.g., from funded EarthCube projects; 3) highlight selected aspects of EarthCube's architectural concept, such as a system of systems (SoS) linked via service interfaces; 4) demonstrate how workflows can be designed and used in a manner that enables sharing, promotes collaboration and fosters learning. The outcome, despite its simplicity, will embody service interfaces sufficient to construct—from extant components—data-integration and data-synthesis workflows involving multiple geoscience domains. Tentatively, the starter kit will build on the Jupyter Notebook web application, augmented with libraries for interfacing current services (at data centers involved in EarthCube's Council of Data Facilities, e.g.) and services developed specifically for EarthCube and spanning most geoscience domains.

SSMNG Software Service Manager: A Scalable Building Blocks Architecture for PUS Services & FDIR Management

NASA Astrophysics Data System (ADS)

Lisio, Giovanni; Candia, Sante; Campolo, Giovanni; Pascucci, Dario

2011-08-01

Thales Alenia Space Italy has carried out the definition of a configurable (on mission basis) PUS ECSS-E_70- 41A see [3] Centralised Services Layer, characterised by:- a mission-independent set of 'classes' implementing the services logic.- a mission-dependent set of configuration data and selection flags.The software components belonging to this layer implement the PUS standard services ECSS-E_70-41A and a set of mission-specific services. The design of this layer has been performed by separating the services mechanisms (mission-independent execution logic) from the services configuration information (mission-dependent data). Once instantiated for a specific mission, the PUS Centralised Services Layer offers a large set of capabilities available to the CSCI's Applications Layer. This paper describes the building blocks PUS architectural solution developed by Thales Alenia Space Italy, emphasizing the mechanisms which allow easy configuration of the Scalable PUS library to fulfill the requirements of different missions. This paper also focus the Thales Alenia Space solution to automatically generate the mission-specific "PUS Services" flight software based on mission specific requirements. Building the PUS services mechanisms, which are configurable on mission basis is part of the PRIMA (Multipurpose Spacecraft Bus ) 'missionisation' process improvement. PRIMA Platform Avionics Software (ASW) is continuously evolving to improve modularity and standardization of interfaces and of SW components (see references in [1]).

ORBIT: an integrated environment for user-customized bioinformatics tools.

PubMed

Bellgard, M I; Hiew, H L; Hunter, A; Wiebrands, M

1999-10-01

There are a large number of computational programs freely available to bioinformaticians via a client/server, web-based environment. However, the client interface to these tools (typically an html form page) cannot be customized from the client side as it is created by the service provider. The form page is usually generic enough to cater for a wide range of users. However, this implies that a user cannot set as 'default' advanced program parameters on the form or even customize the interface to his/her specific requirements or preferences. Currently, there is a lack of end-user interface environments that can be modified by the user when accessing computer programs available on a remote server running on an intranet or over the Internet. We have implemented a client/server system called ORBIT (Online Researcher's Bioinformatics Interface Tools) where individual clients can have interfaces created and customized to command-line-driven, server-side programs. Thus, Internet-based interfaces can be tailored to a user's specific bioinformatic needs. As interfaces are created on the client machine independent of the server, there can be different interfaces to the same server-side program to cater for different parameter settings. The interface customization is relatively quick (between 10 and 60 min) and all client interfaces are integrated into a single modular environment which will run on any computer platform supporting Java. The system has been developed to allow for a number of future enhancements and features. ORBIT represents an important advance in the way researchers gain access to bioinformatics tools on the Internet.

Public service user terminus study compendium of terminus equipment

NASA Technical Reports Server (NTRS)

1979-01-01

General descriptions and specifications are given for equipments which facilitate satellite and terrestrial communications delivery by acting as interfaces between a human, mechanical, or electrical information generator (or source) and the communication system. Manufactures and suppliers are given as well as the purchase, service, or lease costs of various products listed under the following cateories: voice/telephony/facsimile equipment; data/graphics terminals; full motion and processes video equipment; and multiple access equipment.

An Analysis for an Internet Grid to Support Space Based Operations

NASA Technical Reports Server (NTRS)

Bradford, Robert; McNair, Ann R. (Technical Monitor)

2002-01-01

Currently, and in the past, dedicated communication circuits and "network services" with very stringent performance requirements have been used to support manned and unmanned mission critical ground operations at GSFC, JSC, MSFC, KSC and other NASA facilities. Because of the evolution of network technology, it is time to investigate other approaches to providing mission services for space ground and flight operations. In various scientific disciplines, effort is under way to develop network/komputing grids. These grids consisting of networks and computing equipment are enabling lower cost science. Specifically, earthquake research is headed in this direction. With a standard for network and computing interfaces using a grid, a researcher would not be required to develop and engineer NASA/DoD specific interfaces with the attendant increased cost. Use of the Internet Protocol (IP), CCSDS packet spec, and reed-solomon for satellite error correction etc. can be adopted/standardized to provide these interfaces. Generally most interfaces are developed at least to some degree end to end. This study would investigate the feasibility of using existing standards and protocols necessary to implement a SpaceOps Grid. New interface definitions or adoption/modification of existing ones for the various space operational services is required for voice both space based and ground, video, telemetry, commanding and planning may play a role to some undefined level. Security will be a separate focus in the study since security is such a large issue in using public networks. This SpaceOps Grid would be transparent to users. It would be anagulous to the Ethernet protocol's ease of use in that a researcher would plug in their experiment or instrument at one end and would be connected to the appropriate host or server without further intervention. Free flyers would be in this category as well. They would be launched and would transmit without any further intervention with the researcher or ground ops personnel. The payback in developing these new approaches in support of manned and unmanned operations is lower cost and will enable direct participation by more people in organizations and educational institutions in space based science. By lowering the high cost of space based operations and networking, more resource will be available to the science community for science. With a specific grid in place, experiment development and operations would be much less costly by using standardized network interfaces. Because of the extensive connectivity on a global basis, significant numbers of people would participate in science who otherwise would not be able to participate.

From guideline modeling to guideline execution: defining guideline-based decision-support services.

PubMed Central

Tu, S. W.; Musen, M. A.

2000-01-01

We describe our task-based approach to defining the guideline-based decision-support services that the EON system provides. We categorize uses of guidelines in patient-specific decision support into a set of generic tasks--making of decisions, specification of work to be performed, interpretation of data, setting of goals, and issuance of alert and reminders--that can be solved using various techniques. Our model includes constructs required for representing the knowledge used by these techniques. These constructs form a toolkit from which developers can select modeling solutions for guideline task. Based on the tasks and the guideline model, we define a guideline-execution architecture and a model of interactions between a decision-support server and clients that invoke services provided by the server. These services use generic interfaces derived from guideline tasks and their associated modeling constructs. We describe two implementations of these decision-support services and discuss how this work can be generalized. We argue that a well-defined specification of guideline-based decision-support services will facilitate sharing of tools that implement computable clinical guidelines. PMID:11080007

Virtual Hubs for facilitating access to Open Data

NASA Astrophysics Data System (ADS)

Mazzetti, Paolo; Latre, Miguel Á.; Ernst, Julia; Brumana, Raffaella; Brauman, Stefan; Nativi, Stefano

2015-04-01

In October 2014 the ENERGIC-OD (European NEtwork for Redistributing Geospatial Information to user Communities - Open Data) project, funded by the European Union under the Competitiveness and Innovation framework Programme (CIP), has started. In response to the EU call, the general objective of the project is to "facilitate the use of open (freely available) geographic data from different sources for the creation of innovative applications and services through the creation of Virtual Hubs". In ENERGIC-OD, Virtual Hubs are conceived as information systems supporting the full life cycle of Open Data: publishing, discovery and access. They facilitate the use of Open Data by lowering and possibly removing the main barriers which hampers geo-information (GI) usage by end-users and application developers. Data and data services heterogeneity is recognized as one of the major barriers to Open Data (re-)use. It imposes end-users and developers to spend a lot of effort in accessing different infrastructures and harmonizing datasets. Such heterogeneity cannot be completely removed through the adoption of standard specifications for service interfaces, metadata and data models, since different infrastructures adopt different standards to answer to specific challenges and to address specific use-cases. Thus, beyond a certain extent, heterogeneity is irreducible especially in interdisciplinary contexts. ENERGIC-OD Virtual Hubs address heterogeneity adopting a mediation and brokering approach: specific components (brokers) are dedicated to harmonize service interfaces, metadata and data models, enabling seamless discovery and access to heterogeneous infrastructures and datasets. As an innovation project, ENERGIC-OD will integrate several existing technologies to implement Virtual Hubs as single points of access to geospatial datasets provided by new or existing platforms and infrastructures, including INSPIRE-compliant systems and Copernicus services. ENERGIC OD will deploy a set of five Virtual Hubs (VHs) at national level in France, Germany, Italy, Poland, Spain and an additional one at the European level. VHs will be provided according to the cloud Software-as-a-Services model. The main expected impact of VHs is the creation of new business opportunities opening up access to Research Data and Public Sector Information. Therefore, ENERGIC-OD addresses not only end-users, who will have the opportunity to access the VH through a geo-portal, but also application developers who will be able to access VH functionalities through simple Application Programming Interfaces (API). ENERGIC-OD Consortium will develop ten different applications on top of the deployed VHs. They aim to demonstrate how VHs facilitate the development of new and multidisciplinary applications based on the full exploitation of (open) GI, hence stimulating innovation and business activities.

A demanding web-based PACS supported by web services technology

NASA Astrophysics Data System (ADS)

Costa, Carlos M. A.; Silva, Augusto; Oliveira, José L.; Ribeiro, Vasco G.; Ribeiro, José

2006-03-01

During the last years, the ubiquity of web interfaces have pushed practically all PACS suppliers to develop client applications in which clinical practitioners can receive and analyze medical images, using conventional personal computers and Web browsers. However, due to security and performance issues, the utilization of these software packages has been restricted to Intranets. Paradigmatically, one of the most important advantages of digital image systems is to simplify the widespread sharing and remote access of medical data between healthcare institutions. This paper analyses the traditional PACS drawbacks that contribute to their reduced usage in the Internet and describes a PACS based on Web Services technology that supports a customized DICOM encoding syntax and a specific compression scheme providing all historical patient data in a unique Web interface.

Design of an efficient framework for fast prototyping of customized human-computer interfaces and virtual environments for rehabilitation.

PubMed

Avola, Danilo; Spezialetti, Matteo; Placidi, Giuseppe

2013-06-01

Rehabilitation is often required after stroke, surgery, or degenerative diseases. It has to be specific for each patient and can be easily calibrated if assisted by human-computer interfaces and virtual reality. Recognition and tracking of different human body landmarks represent the basic features for the design of the next generation of human-computer interfaces. The most advanced systems for capturing human gestures are focused on vision-based techniques which, on the one hand, may require compromises from real-time and spatial precision and, on the other hand, ensure natural interaction experience. The integration of vision-based interfaces with thematic virtual environments encourages the development of novel applications and services regarding rehabilitation activities. The algorithmic processes involved during gesture recognition activity, as well as the characteristics of the virtual environments, can be developed with different levels of accuracy. This paper describes the architectural aspects of a framework supporting real-time vision-based gesture recognition and virtual environments for fast prototyping of customized exercises for rehabilitation purposes. The goal is to provide the therapist with a tool for fast implementation and modification of specific rehabilitation exercises for specific patients, during functional recovery. Pilot examples of designed applications and preliminary system evaluation are reported and discussed. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Graphical user interfaces for symbol-oriented database visualization and interaction

NASA Astrophysics Data System (ADS)

Brinkschulte, Uwe; Siormanolakis, Marios; Vogelsang, Holger

1997-04-01

In this approach, two basic services designed for the engineering of computer based systems are combined: a symbol-oriented man-machine-service and a high speed database-service. The man-machine service is used to build graphical user interfaces (GUIs) for the database service; these interfaces are stored using the database service. The idea is to create a GUI-builder and a GUI-manager for the database service based upon the man-machine service using the concept of symbols. With user-definable and predefined symbols, database contents can be visualized and manipulated in a very flexible and intuitive way. Using the GUI-builder and GUI-manager, a user can build and operate its own graphical user interface for a given database according to its needs without writing a single line of code.

Integrating semantic web technologies and geospatial catalog services for geospatial information discovery and processing in cyberinfrastructure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yue, Peng; Gong, Jianya; Di, Liping

Abstract A geospatial catalogue service provides a network-based meta-information repository and interface for advertising and discovering shared geospatial data and services. Descriptive information (i.e., metadata) for geospatial data and services is structured and organized in catalogue services. The approaches currently available for searching and using that information are often inadequate. Semantic Web technologies show promise for better discovery methods by exploiting the underlying semantics. Such development needs special attention from the Cyberinfrastructure perspective, so that the traditional focus on discovery of and access to geospatial data can be expanded to support the increased demand for processing of geospatial information andmore » discovery of knowledge. Semantic descriptions for geospatial data, services, and geoprocessing service chains are structured, organized, and registered through extending elements in the ebXML Registry Information Model (ebRIM) of a geospatial catalogue service, which follows the interface specifications of the Open Geospatial Consortium (OGC) Catalogue Services for the Web (CSW). The process models for geoprocessing service chains, as a type of geospatial knowledge, are captured, registered, and discoverable. Semantics-enhanced discovery for geospatial data, services/service chains, and process models is described. Semantic search middleware that can support virtual data product materialization is developed for the geospatial catalogue service. The creation of such a semantics-enhanced geospatial catalogue service is important in meeting the demands for geospatial information discovery and analysis in Cyberinfrastructure.« less

Evosystem Services: Rapid Evolution and the Provision of Ecosystem Services.

PubMed

Rudman, Seth M; Kreitzman, Maayan; Chan, Kai M A; Schluter, Dolph

2017-06-01

Evolution is recognized as the source of all organisms, and hence many ecosystem services. However, the role that contemporary evolution might play in maintaining and enhancing specific ecosystem services has largely been overlooked. Recent advances at the interface of ecology and evolution have demonstrated how contemporary evolution can shape ecological communities and ecosystem functions. We propose a definition and quantitative criteria to study how rapid evolution affects ecosystem services (here termed contemporary evosystem services) and present plausible scenarios where such services might exist. We advocate for the direct measurement of contemporary evosystem services to improve understanding of how changing environments will alter resource availability and human well-being, and highlight the potential utility of managing rapid evolution for future ecosystem services. Copyright © 2017 Elsevier Ltd. All rights reserved.

Communication Systems in Healthcare

PubMed Central

Coiera, Enrico

2006-01-01

The care of patients now almost inevitably seems to involve many different individuals, all needing to share patient information and discuss their management. As a consequence there is increasing interest in, and use of, information and communication technologies to support health services. Yet, while there is significant discussion of, and investment in, information technologies, communication systems receive much less attention and the clinical adoption of even simpler services like voice-mail or electronic mail is still not commonplace in many health services. There remain enormous gaps in our broad understanding of the role of communication services in health care delivery. Laboratory medicine is perhaps even more poorly studied than many other areas, such as the interface between primary care and hospital services. Given this lack of specific information about laboratory communication services, this paper will step back and generally review the components of a communication system, including the basic concepts of a communication channel, service, device and interaction mode. The review will then try and summarise some of what is known about specific communication problems that arise across health services in the main, including the community and hospital service delivery. PMID:17077879

A Mediator-Based Approach to Resolving Interface Heterogeneity of Web Services

NASA Astrophysics Data System (ADS)

Leitner, Philipp; Rosenberg, Florian; Michlmayr, Anton; Huber, Andreas; Dustdar, Schahram

In theory, service-oriented architectures are based on the idea of increasing flexibility in the selection of internal and external business partners using loosely-coupled services. However, in practice this flexibility is limited by the fact that partners need not only to provide the same service, but to do so via virtually the same interface in order to actually be interchangeable easily. Invocation-level mediation may be used to overcome this issue — by using mediation interface differences can be resolved transparently at runtime. In this chapter we discuss the basic ideas of mediation, with a focus on interface-level mediation. We show how interface mediation is integrated into our dynamic Web service invocation framework DAIOS, and present three different mediation strategies, one based on structural message similarity, one based on semantically annotated WSDL, and one which is embedded into the VRESCo SOA runtime, a larger research project with explicit support for service mediation.

The Geodetic Seamless Archive Centers Service Layer: A System Architecture for Federating Geodesy Data Repositories

NASA Astrophysics Data System (ADS)

McWhirter, J.; Boler, F. M.; Bock, Y.; Jamason, P.; Squibb, M. B.; Noll, C. E.; Blewitt, G.; Kreemer, C. W.

2010-12-01

Three geodesy Archive Centers, Scripps Orbit and Permanent Array Center (SOPAC), NASA's Crustal Dynamics Data Information System (CDDIS) and UNAVCO are engaged in a joint effort to define and develop a common Web Service Application Programming Interface (API) for accessing geodetic data holdings. This effort is funded by the NASA ROSES ACCESS Program to modernize the original GPS Seamless Archive Centers (GSAC) technology which was developed in the 1990s. A new web service interface, the GSAC-WS, is being developed to provide uniform and expanded mechanisms through which users can access our data repositories. In total, our respective archives hold tens of millions of files and contain a rich collection of site/station metadata. Though we serve similar user communities, we currently provide a range of different access methods, query services and metadata formats. This leads to a lack of consistency in the userís experience and a duplication of engineering efforts. The GSAC-WS API and its reference implementation in an underlying Java-based GSAC Service Layer (GSL) supports metadata and data queries into site/station oriented data archives. The general nature of this API makes it applicable to a broad range of data systems. The overall goals of this project include providing consistent and rich query interfaces for end users and client programs, the development of enabling technology to facilitate third party repositories in developing these web service capabilities and to enable the ability to perform data queries across a collection of federated GSAC-WS enabled repositories. A fundamental challenge faced in this project is to provide a common suite of query services across a heterogeneous collection of data yet enabling each repository to expose their specific metadata holdings. To address this challenge we are developing a "capabilities" based service where a repository can describe its specific query and metadata capabilities. Furthermore, the architecture of the GSL is based on a model-view paradigm that decouples the underlying data model semantics from particular representations of the data model. This will allow for the GSAC-WS enabled repositories to evolve their service offerings to incorporate new metadata definition formats (e.g., ISO-19115, FGDC, JSON, etc.) and new techniques for accessing their holdings. Building on the core GSAC-WS implementations the project is also developing a federated/distributed query service. This service will seamlessly integrate with the GSAC Service Layer and will support data and metadata queries across a collection of federated GSAC repositories.

A component-based, distributed object services architecture for a clinical workstation.

PubMed

Chueh, H C; Raila, W F; Pappas, J J; Ford, M; Zatsman, P; Tu, J; Barnett, G O

1996-01-01

Attention to an architectural framework in the development of clinical applications can promote reusability of both legacy systems as well as newly designed software. We describe one approach to an architecture for a clinical workstation application which is based on a critical middle tier of distributed object-oriented services. This tier of network-based services provides flexibility in the creation of both the user interface and the database tiers. We developed a clinical workstation for ambulatory care using this architecture, defining a number of core services including those for vocabulary, patient index, documents, charting, security, and encounter management. These services can be implemented through proprietary or more standard distributed object interfaces such as CORBA and OLE. Services are accessed over the network by a collection of user interface components which can be mixed and matched to form a variety of interface styles. These services have also been reused with several applications based on World Wide Web browser interfaces.

A component-based, distributed object services architecture for a clinical workstation.

PubMed Central

Chueh, H. C.; Raila, W. F.; Pappas, J. J.; Ford, M.; Zatsman, P.; Tu, J.; Barnett, G. O.

1996-01-01

Attention to an architectural framework in the development of clinical applications can promote reusability of both legacy systems as well as newly designed software. We describe one approach to an architecture for a clinical workstation application which is based on a critical middle tier of distributed object-oriented services. This tier of network-based services provides flexibility in the creation of both the user interface and the database tiers. We developed a clinical workstation for ambulatory care using this architecture, defining a number of core services including those for vocabulary, patient index, documents, charting, security, and encounter management. These services can be implemented through proprietary or more standard distributed object interfaces such as CORBA and OLE. Services are accessed over the network by a collection of user interface components which can be mixed and matched to form a variety of interface styles. These services have also been reused with several applications based on World Wide Web browser interfaces. PMID:8947744

A service brokering and recommendation mechanism for better selecting cloud services.

PubMed

Gui, Zhipeng; Yang, Chaowei; Xia, Jizhe; Huang, Qunying; Liu, Kai; Li, Zhenlong; Yu, Manzhu; Sun, Min; Zhou, Nanyin; Jin, Baoxuan

2014-01-01

Cloud computing is becoming the new generation computing infrastructure, and many cloud vendors provide different types of cloud services. How to choose the best cloud services for specific applications is very challenging. Addressing this challenge requires balancing multiple factors, such as business demands, technologies, policies and preferences in addition to the computing requirements. This paper recommends a mechanism for selecting the best public cloud service at the levels of Infrastructure as a Service (IaaS) and Platform as a Service (PaaS). A systematic framework and associated workflow include cloud service filtration, solution generation, evaluation, and selection of public cloud services. Specifically, we propose the following: a hierarchical information model for integrating heterogeneous cloud information from different providers and a corresponding cloud information collecting mechanism; a cloud service classification model for categorizing and filtering cloud services and an application requirement schema for providing rules for creating application-specific configuration solutions; and a preference-aware solution evaluation mode for evaluating and recommending solutions according to the preferences of application providers. To test the proposed framework and methodologies, a cloud service advisory tool prototype was developed after which relevant experiments were conducted. The results show that the proposed system collects/updates/records the cloud information from multiple mainstream public cloud services in real-time, generates feasible cloud configuration solutions according to user specifications and acceptable cost predication, assesses solutions from multiple aspects (e.g., computing capability, potential cost and Service Level Agreement, SLA) and offers rational recommendations based on user preferences and practical cloud provisioning; and visually presents and compares solutions through an interactive web Graphical User Interface (GUI).

Inspiring the Civil Revolution: The Role of Bullying Education and Experiential Learning

ERIC Educational Resources Information Center

Gilbert, Jacqueline A.; Raffo, Deana M.

2015-01-01

The authors explore service-learning as a pedagogy to promote bullying prevention within schools. Specifically, they explain the preparatory experiences necessary for students in an undergraduate Experiential Learning Principles of Management course to interface with high school freshmen and the reciprocal impact that students at both levels had…

User Interface Design in Medical Distributed Web Applications.

PubMed

Serban, Alexandru; Crisan-Vida, Mihaela; Mada, Leonard; Stoicu-Tivadar, Lacramioara

2016-01-01

User interfaces are important to facilitate easy learning and operating with an IT application especially in the medical world. An easy to use interface has to be simple and to customize the user needs and mode of operation. The technology in the background is an important tool to accomplish this. The present work aims to creating a web interface using specific technology (HTML table design combined with CSS3) to provide an optimized responsive interface for a complex web application. In the first phase, the current icMED web medical application layout is analyzed, and its structure is designed using specific tools, on source files. In the second phase, a new graphic adaptable interface to different mobile terminals is proposed, (using HTML table design (TD) and CSS3 method) that uses no source files, just lines of code for layout design, improving the interaction in terms of speed and simplicity. For a complex medical software application a new prototype layout was designed and developed using HTML tables. The method uses a CSS code with only CSS classes applied to one or multiple HTML table elements, instead of CSS styles that can be applied to just one DIV tag at once. The technique has the advantage of a simplified CSS code, and a better adaptability to different media resolutions compared to DIV-CSS style method. The presented work is a proof that adaptive web interfaces can be developed just using and combining different types of design methods and technologies, using HTML table design, resulting in a simpler to learn and use interface, suitable for healthcare services.

AGUIA: autonomous graphical user interface assembly for clinical trials semantic data services.

PubMed

Correa, Miria C; Deus, Helena F; Vasconcelos, Ana T; Hayashi, Yuki; Ajani, Jaffer A; Patnana, Srikrishna V; Almeida, Jonas S

2010-10-26

AGUIA is a front-end web application originally developed to manage clinical, demographic and biomolecular patient data collected during clinical trials at MD Anderson Cancer Center. The diversity of methods involved in patient screening and sample processing generates a variety of data types that require a resource-oriented architecture to capture the associations between the heterogeneous data elements. AGUIA uses a semantic web formalism, resource description framework (RDF), and a bottom-up design of knowledge bases that employ the S3DB tool as the starting point for the client's interface assembly. The data web service, S3DB, meets the necessary requirements of generating the RDF and of explicitly distinguishing the description of the domain from its instantiation, while allowing for continuous editing of both. Furthermore, it uses an HTTP-REST protocol, has a SPARQL endpoint, and has open source availability in the public domain, which facilitates the development and dissemination of this application. However, S3DB alone does not address the issue of representing content in a form that makes sense for domain experts. We identified an autonomous set of descriptors, the GBox, that provides user and domain specifications for the graphical user interface. This was achieved by identifying a formalism that makes use of an RDF schema to enable the automatic assembly of graphical user interfaces in a meaningful manner while using only resources native to the client web browser (JavaScript interpreter, document object model). We defined a generalized RDF model such that changes in the graphic descriptors are automatically and immediately (locally) reflected into the configuration of the client's interface application. The design patterns identified for the GBox benefit from and reflect the specific requirements of interacting with data generated by clinical trials, and they contain clues for a general purpose solution to the challenge of having interfaces automatically assembled for multiple and volatile views of a domain. By coding AGUIA in JavaScript, for which all browsers include a native interpreter, a solution was found that assembles interfaces that are meaningful to the particular user, and which are also ubiquitous and lightweight, allowing the computational load to be carried by the client's machine.

YEASTRACT: providing a programmatic access to curated transcriptional regulatory associations in Saccharomyces cerevisiae through a web services interface

PubMed Central

Abdulrehman, Dário; Monteiro, Pedro Tiago; Teixeira, Miguel Cacho; Mira, Nuno Pereira; Lourenço, Artur Bastos; dos Santos, Sandra Costa; Cabrito, Tânia Rodrigues; Francisco, Alexandre Paulo; Madeira, Sara Cordeiro; Aires, Ricardo Santos; Oliveira, Arlindo Limede; Sá-Correia, Isabel; Freitas, Ana Teresa

2011-01-01

The YEAst Search for Transcriptional Regulators And Consensus Tracking (YEASTRACT) information system (http://www.yeastract.com) was developed to support the analysis of transcription regulatory associations in Saccharomyces cerevisiae. Last updated in June 2010, this database contains over 48 200 regulatory associations between transcription factors (TFs) and target genes, including 298 specific DNA-binding sites for 110 characterized TFs. All regulatory associations stored in the database were revisited and detailed information on the experimental evidences that sustain those associations was added and classified as direct or indirect evidences. The inclusion of this new data, gathered in response to the requests of YEASTRACT users, allows the user to restrict its queries to subsets of the data based on the existence or not of experimental evidences for the direct action of the TFs in the promoter region of their target genes. Another new feature of this release is the availability of all data through a machine readable web-service interface. Users are no longer restricted to the set of available queries made available through the existing web interface, and can use the web service interface to query, retrieve and exploit the YEASTRACT data using their own implementation of additional functionalities. The YEASTRACT information system is further complemented with several computational tools that facilitate the use of the curated data when answering a number of important biological questions. Since its first release in 2006, YEASTRACT has been extensively used by hundreds of researchers from all over the world. We expect that by making the new data and services available, the system will continue to be instrumental for yeast biologists and systems biology researchers. PMID:20972212

Attacking the information access problem with expert systems

NASA Technical Reports Server (NTRS)

Ragusa, James M.; Orwig, Gary W.

1991-01-01

The results of applications research directed at finding an improved method of storing and accessing information are presented. Twelve microcomputer-based expert systems shells and five laser-optical formats have been studied, and the general and specific methods of interfacing these technologies are being tested in prototype systems. Shell features and interfacing capabilities are discussed, and results from the study of five laser-optical formats are recounted including the video laser, compact, and WORM disks, and laser cards and film. Interfacing, including laser disk device driver interfacing, is discussed and it is pointed out that in order to control the laser device from within the expert systems application, the expert systems shell must be able to access the device driver software. Potential integrated applications are investigated and an initial list is provided including consumer services, travel, law enforcement, human resources, marketing, and education and training.

NASA/NBS (National Aeronautics and Space Administration/National Bureau of Standards) standard reference model for telerobot control system architecture (NASREM)

NASA Technical Reports Server (NTRS)

Albus, James S.; Mccain, Harry G.; Lumia, Ronald

1989-01-01

The document describes the NASA Standard Reference Model (NASREM) Architecture for the Space Station Telerobot Control System. It defines the functional requirements and high level specifications of the control system for the NASA space Station document for the functional specification, and a guideline for the development of the control system architecture, of the 10C Flight Telerobot Servicer. The NASREM telerobot control system architecture defines a set of standard modules and interfaces which facilitates software design, development, validation, and test, and make possible the integration of telerobotics software from a wide variety of sources. Standard interfaces also provide the software hooks necessary to incrementally upgrade future Flight Telerobot Systems as new capabilities develop in computer science, robotics, and autonomous system control.

A Model-Driven, Science Data Product Registration Service

NASA Astrophysics Data System (ADS)

Hardman, S.; Ramirez, P.; Hughes, J. S.; Joyner, R.; Cayanan, M.; Lee, H.; Crichton, D. J.

2011-12-01

The Planetary Data System (PDS) has undertaken an effort to overhaul the PDS data architecture (including the data model, data structures, data dictionary, etc.) and to deploy an upgraded software system (including data services, distributed data catalog, etc.) that fully embraces the PDS federation as an integrated system while taking advantage of modern innovations in information technology (including networking capabilities, processing speeds, and software breakthroughs). A core component of this new system is the Registry Service that will provide functionality for tracking, auditing, locating, and maintaining artifacts within the system. These artifacts can range from data files and label files, schemas, dictionary definitions for objects and elements, documents, services, etc. This service offers a single reference implementation of the registry capabilities detailed in the Consultative Committee for Space Data Systems (CCSDS) Registry Reference Model White Book. The CCSDS Reference Model in turn relies heavily on the Electronic Business using eXtensible Markup Language (ebXML) standards for registry services and the registry information model, managed by the OASIS consortium. Registries are pervasive components in most information systems. For example, data dictionaries, service registries, LDAP directory services, and even databases provide registry-like services. These all include an account of informational items that are used in large-scale information systems ranging from data values such as names and codes, to vocabularies, services and software components. The problem is that many of these registry-like services were designed with their own data models associated with the specific type of artifact they track. Additionally these services each have their own specific interface for interacting with the service. This Registry Service implements the data model specified in the ebXML Registry Information Model (RIM) specification that supports the various artifacts above as well as offering the flexibility to support customer-defined artifacts. Key features for the Registry Service include: - Model-based configuration specifying customer-defined artifact types, metadata attributes to capture for each artifact type, supported associations and classification schemes. - A REST-based external interface that is accessible via the Hypertext Transfer Protocol (HTTP). - Federation of Registry Service instances allowing associations between registered artifacts across registries as well as queries for artifacts across those same registries. A federation also enables features such as replication and synchronization if desired for a given deployment. In addition to its use as a core component of the PDS, the generic implementation of the Registry Service facilitates its applicability as a core component in any science data archive or science data system.

Services for domain specific developments in the Cloud

NASA Astrophysics Data System (ADS)

Schwichtenberg, Horst; Gemuend, André

2015-04-01

We will discuss and demonstrate the possibilities of new Cloud Services where the complete development of code is in the Cloud. We will discuss the possibilities of such services where the complete development cycle from programing to testing is in the cloud. This can be also combined with dedicated research domain specific services and hide the burden of accessing available infrastructures. As an example, we will show a service that is intended to complement the services of the VERCE projects infrastructure, a service that utilizes Cloud resources to offer simplified execution of data pre- and post-processing scripts. It offers users access to the ObsPy seismological toolbox for processing data with the Python programming language, executed on virtual Cloud resources in a secured sandbox. The solution encompasses a frontend with a modern graphical user interface, a messaging infrastructure as well as Python worker nodes for background processing. All components are deployable in the Cloud and have been tested on different environments based on OpenStack and OpenNebula. Deployments on commercial, public Clouds will be tested in the future.

The Protein Identifier Cross-Referencing (PICR) service: reconciling protein identifiers across multiple source databases.

PubMed

Côté, Richard G; Jones, Philip; Martens, Lennart; Kerrien, Samuel; Reisinger, Florian; Lin, Quan; Leinonen, Rasko; Apweiler, Rolf; Hermjakob, Henning

2007-10-18

Each major protein database uses its own conventions when assigning protein identifiers. Resolving the various, potentially unstable, identifiers that refer to identical proteins is a major challenge. This is a common problem when attempting to unify datasets that have been annotated with proteins from multiple data sources or querying data providers with one flavour of protein identifiers when the source database uses another. Partial solutions for protein identifier mapping exist but they are limited to specific species or techniques and to a very small number of databases. As a result, we have not found a solution that is generic enough and broad enough in mapping scope to suit our needs. We have created the Protein Identifier Cross-Reference (PICR) service, a web application that provides interactive and programmatic (SOAP and REST) access to a mapping algorithm that uses the UniProt Archive (UniParc) as a data warehouse to offer protein cross-references based on 100% sequence identity to proteins from over 70 distinct source databases loaded into UniParc. Mappings can be limited by source database, taxonomic ID and activity status in the source database. Users can copy/paste or upload files containing protein identifiers or sequences in FASTA format to obtain mappings using the interactive interface. Search results can be viewed in simple or detailed HTML tables or downloaded as comma-separated values (CSV) or Microsoft Excel (XLS) files suitable for use in a local database or a spreadsheet. Alternatively, a SOAP interface is available to integrate PICR functionality in other applications, as is a lightweight REST interface. We offer a publicly available service that can interactively map protein identifiers and protein sequences to the majority of commonly used protein databases. Programmatic access is available through a standards-compliant SOAP interface or a lightweight REST interface. The PICR interface, documentation and code examples are available at http://www.ebi.ac.uk/Tools/picr.

The Protein Identifier Cross-Referencing (PICR) service: reconciling protein identifiers across multiple source databases

PubMed Central

Côté, Richard G; Jones, Philip; Martens, Lennart; Kerrien, Samuel; Reisinger, Florian; Lin, Quan; Leinonen, Rasko; Apweiler, Rolf; Hermjakob, Henning

2007-01-01

Background Each major protein database uses its own conventions when assigning protein identifiers. Resolving the various, potentially unstable, identifiers that refer to identical proteins is a major challenge. This is a common problem when attempting to unify datasets that have been annotated with proteins from multiple data sources or querying data providers with one flavour of protein identifiers when the source database uses another. Partial solutions for protein identifier mapping exist but they are limited to specific species or techniques and to a very small number of databases. As a result, we have not found a solution that is generic enough and broad enough in mapping scope to suit our needs. Results We have created the Protein Identifier Cross-Reference (PICR) service, a web application that provides interactive and programmatic (SOAP and REST) access to a mapping algorithm that uses the UniProt Archive (UniParc) as a data warehouse to offer protein cross-references based on 100% sequence identity to proteins from over 70 distinct source databases loaded into UniParc. Mappings can be limited by source database, taxonomic ID and activity status in the source database. Users can copy/paste or upload files containing protein identifiers or sequences in FASTA format to obtain mappings using the interactive interface. Search results can be viewed in simple or detailed HTML tables or downloaded as comma-separated values (CSV) or Microsoft Excel (XLS) files suitable for use in a local database or a spreadsheet. Alternatively, a SOAP interface is available to integrate PICR functionality in other applications, as is a lightweight REST interface. Conclusion We offer a publicly available service that can interactively map protein identifiers and protein sequences to the majority of commonly used protein databases. Programmatic access is available through a standards-compliant SOAP interface or a lightweight REST interface. The PICR interface, documentation and code examples are available at . PMID:17945017

Leveraging Open Standard Interfaces in Accessing and Processing NASA Data Model Outputs

NASA Astrophysics Data System (ADS)

Falke, S. R.; Alameh, N. S.; Hoijarvi, K.; de La Beaujardiere, J.; Bambacus, M. J.

2006-12-01

An objective of NASA's Earth Science Division is to develop advanced information technologies for processing, archiving, accessing, visualizing, and communicating Earth Science data. To this end, NASA and other federal agencies have collaborated with the Open Geospatial Consortium (OGC) to research, develop, and test interoperability specifications within projects and testbeds benefiting the government, industry, and the public. This paper summarizes the results of a recent effort under the auspices of the OGC Web Services testbed phase 4 (OWS-4) to explore standardization approaches for accessing and processing the outputs of NASA models of physical phenomena. Within the OWS-4 context, experiments were designed to leverage the emerging OGC Web Processing Service (WPS) and Web Coverage Service (WCS) specifications to access, filter and manipulate the outputs of the NASA Goddard Earth Observing System (GEOS) and Goddard Chemistry Aerosol Radiation and Transport (GOCART) forecast models. In OWS-4, the intent is to provide the users with more control over the subsets of data that they can extract from the model results as well as over the final portrayal of that data. To meet that goal, experiments have been designed to test the suitability of use of OGC's Web Processing Service (WPS) and Web Coverage Service (WCS) for filtering, processing and portraying the model results (including slices by height or by time), and to identify any enhancements to the specs to meet the desired objectives. This paper summarizes the findings of the experiments highlighting the value of the Web Processing Service in providing standard interfaces for accessing and manipulating model data within spatial and temporal frameworks. The paper also points out the key shortcomings of the WPS especially in terms in comparison with a SOAP/WSDL approach towards solving the same problem.

Data Access and Web Services at the EarthScope Plate Boundary Observatory

NASA Astrophysics Data System (ADS)

Matykiewicz, J.; Anderson, G.; Henderson, D.; Hodgkinson, K.; Hoyt, B.; Lee, E.; Persson, E.; Torrez, D.; Smith, J.; Wright, J.; Jackson, M.

2007-12-01

The EarthScope Plate Boundary Observatory (PBO) at UNAVCO, Inc., part of the NSF-funded EarthScope project, is designed to study the three-dimensional strain field resulting from deformation across the active boundary zone between the Pacific and North American plates in the western United States. To meet these goals, PBO will install 880 continuous GPS stations, 103 borehole strainmeter stations, and five laser strainmeters, as well as manage data for 209 previously existing continuous GPS stations and one previously existing laser strainmeter. UNAVCO provides access to data products from these stations, as well as general information about the PBO project, via the PBO web site (http://pboweb.unavco.org). GPS and strainmeter data products can be found using a variety of access methods, incuding map searches, text searches, and station specific data retrieval. In addition, the PBO construction status is available via multiple mapping interfaces, including custom web based map widgets and Google Earth. Additional construction details can be accessed from PBO operational pages and station specific home pages. The current state of health for the PBO network is available with the statistical snap-shot, full map interfaces, tabular web based reports, and automatic data mining and alerts. UNAVCO is currently working to enhance the community access to this information by developing a web service framework for the discovery of data products, interfacing with operational engineers, and exposing data services to third party participants. In addition, UNAVCO, through the PBO project, provides advanced data management and monitoring systems for use by the community in operating geodetic networks in the United States and beyond. We will demonstrate these systems during the AGU meeting, and we welcome inquiries from the community at any time.

The Plate Boundary Observatory: Community Focused Web Services

NASA Astrophysics Data System (ADS)

Matykiewicz, J.; Anderson, G.; Lee, E.; Hoyt, B.; Hodgkinson, K.; Persson, E.; Wright, J.; Torrez, D.; Jackson, M.

2006-12-01

The Plate Boundary Observatory (PBO), part of the NSF-funded EarthScope project, is designed to study the three-dimensional strain field resulting from deformation across the active boundary zone between the Pacific and North American plates in the western United States. To meet these goals, PBO will install 852 continuous GPS stations, 103 borehole strainmeter stations, 28 tiltmeters, and five laser strainmeters, as well as manage data for 209 previously existing continuous GPS stations. UNAVCO provides access to data products from these stations, as well as general information about the PBO project, via the PBO web site (http://pboweb.unavco.org). GPS and strainmeter data products can be found using a variety of channels, including map searches, text searches, and station specific data retrieval. In addition, the PBO construction status is available via multiple mapping interfaces, including custom web based map widgets and Google Earth. Additional construction details can be accessed from PBO operational pages and station specific home pages. The current state of health for the PBO network is available with the statistical snap-shot, full map interfaces, tabular web based reports, and automatic data mining and alerts. UNAVCO is currently working to enhance the community access to this information by developing a web service framework for the discovery of data products, interfacing with operational engineers, and exposing data services to third party participants. In addition, UNAVCO, through the PBO project, provides advanced data management and monitoring systems for use by the community in operating geodetic networks in the United States and beyond. We will demonstrate these systems during the AGU meeting, and we welcome inquiries from the community at any time.

Development of Virtual Resource Based IoT Proxy for Bridging Heterogeneous Web Services in IoT Networks.

PubMed

Jin, Wenquan; Kim, DoHyeun

2018-05-26

The Internet of Things is comprised of heterogeneous devices, applications, and platforms using multiple communication technologies to connect the Internet for providing seamless services ubiquitously. With the requirement of developing Internet of Things products, many protocols, program libraries, frameworks, and standard specifications have been proposed. Therefore, providing a consistent interface to access services from those environments is difficult. Moreover, bridging the existing web services to sensor and actuator networks is also important for providing Internet of Things services in various industry domains. In this paper, an Internet of Things proxy is proposed that is based on virtual resources to bridge heterogeneous web services from the Internet to the Internet of Things network. The proxy enables clients to have transparent access to Internet of Things devices and web services in the network. The proxy is comprised of server and client to forward messages for different communication environments using the virtual resources which include the server for the message sender and the client for the message receiver. We design the proxy for the Open Connectivity Foundation network where the virtual resources are discovered by the clients as Open Connectivity Foundation resources. The virtual resources represent the resources which expose services in the Internet by web service providers. Although the services are provided by web service providers from the Internet, the client can access services using the consistent communication protocol in the Open Connectivity Foundation network. For discovering the resources to access services, the client also uses the consistent discovery interface to discover the Open Connectivity Foundation devices and virtual resources.

Easy access to geophysical data sets at the IRIS Data Management Center

NASA Astrophysics Data System (ADS)

Trabant, C.; Ahern, T.; Suleiman, Y.; Karstens, R.; Weertman, B.

2012-04-01

At the IRIS Data Management Center (DMC) we primarily manage seismological data but also have other geophysical data sets for related fields including atmospheric pressure and gravity measurements and higher level data products derived from raw data. With a few exceptions all data managed by the IRIS DMC are openly available and we serve an international research audience. These data are available via a number of different mechanisms from batch requests submitted through email, web interfaces, near real time streams and more recently web services. Our initial suite of web services offer access to almost all of the raw data and associated metadata managed at the DMC. In addition, we offer services that apply processing to the data before it is sent to the user. Web service technologies are ubiquitous with support available in nearly every programming language and operating system. By their nature web services are programmatic interfaces, but by choosing a simple subset of web service methods we make our data available to a very broad user base. These interfaces will be usable by professional developers as well as non-programmers. Whenever possible we chose open and recognized standards. The data returned to the user is in a variety of formats depending on type, including FDSN SEED, QuakeML, StationXML, ASCII, PNG images and in some cases where no appropriate standard could be found a customized XML format. To promote easy access to seismological data for all researchers we are coordinating with international partners to define web service interfaces standards. Additionally we are working with key partners in Europe to complete the initial implementation of these services. Once a standard has been adopted and implemented at multiple data centers researchers will be able to use the same request tools to access data across multiple data centers. The web services that apply on-demand processing to requested data include the capability to apply instrument corrections and format translations which ultimately allows more researchers to use the data without knowledge of specific data and metadata formats. In addition to serving as a new platform on top of which research scientists will build advanced processing tools we anticipate that they will result in more data being accessible by more users.

Biodiversity Meets the Atmosphere: A Global View of Forest Canopies

Treesearch

C. M. P. Ozanne; D. Anhuf; S. L. Boulter; M. Keller; R. L. Kitching; C. Korner; F. C. Meinzer; A. W. Mitchell; T. Nakashizuka; P. L. Silva Dias; N. E. Stork; S. J. Wright; M Yoshimura

2003-01-01

The forest canopy is the functional interface between 90% of Earth’s terrestrial biomass and the atmosphere. Multidisciplinary research in the canopy has expanded concepts of global species richness, physiological processes, and the provision of ecosystem services. Trees respond in a species-specific manner to elevated carbon dioxide levels, while climate change...

Knowledge-Based Information Management in Decision Support for Ecosystem Management

Treesearch

Keith Reynolds; Micahel Saunders; Richard Olson; Daniel Schmoldt; Michael Foster; Donald Latham; Bruce Miller; John Steffenson; Lawrence Bednar; Patrick Cunningham

1995-01-01

The Pacific Northwest Research Station (USDA Forest Service) is developing a knowledge-based information management system to provide decision support for watershed analysis in the Pacific Northwest region of the U.S. The decision support system includes: (1) a GIS interface that allows users to graphically navigate to specific provinces and watersheds and display a...

A Knowledge-Based Information Management System for Watershed Analysis in the Pacific Northwest U.S.

Treesearch

Keith Reynolds; Patrick Cunningham; Larry Bednar; Michael Saunders; Michael Foster; Richard Olson; Daniel Schmoldt; Donald Latham; Bruce Miller; John Steffenson

1996-01-01

The Pacific Northwest Research Station (USDA Forest Service) is developing a knowledge-based information management system to provide decision support for watershed analysis. The system includes: (1) a GIS interface that allows users to navigate graphically to specific provinces and watersheds and display a variety of themes (vegetation, streams, roads, topography, etc...

How to Sustain Interprofessional Learning and Practice: Messages for Higher Education and Health and Social Care Management

ERIC Educational Resources Information Center

Meads, Geoffrey; Jones, Isabel; Harrison, Rachel; Forman, Dawn; Turner, Warren

2009-01-01

The principal aim of this article is to promote the more effective integration of interprofessional learning with practice developments in health and social care. Ten specific recommendations are offered for the successful management of recent central policies for collaboration at the interface of the higher education and service sectors.…

A web-based biosignal data management system for U-health data integration.

PubMed

Ro, Dongwoo; Yoo, Sooyoung; Choi, Jinwook

2008-11-06

In the ubiquitous healthcare environment, the biosignal data should be easily accessed and properly maintained. This paper describes a web-based data management system. It consists of a device interface, a data upload control, a central repository, and a web server. For the user-specific web services, a MFER Upload ActiveX Control was developed.

A Standard for Sharing and Accessing Time Series Data: The Heliophysics Application Programmers Interface (HAPI) Specification

NASA Astrophysics Data System (ADS)

Vandegriff, J. D.; King, T. A.; Weigel, R. S.; Faden, J.; Roberts, D. A.; Harris, B. T.; Lal, N.; Boardsen, S. A.; Candey, R. M.; Lindholm, D. M.

2017-12-01

We present the Heliophysics Application Programmers Interface (HAPI), a new interface specification that both large and small data centers can use to expose time series data holdings in a standard way. HAPI was inspired by the similarity of existing services at many Heliophysics data centers, and these data centers have collaborated to define a single interface that captures best practices and represents what everyone considers the essential, lowest common denominator for basic data access. This low level access can serve as infrastructure to support greatly enhanced interoperability among analysis tools, with the goal being simplified analysis and comparison of data from any instrument, model, mission or data center. The three main services a HAPI server must perform are 1. list a catalog of datasets (one unique ID per dataset), 2. describe the content of one dataset (JSON metadata), and 3. retrieve numerical content for one dataset (stream the actual data). HAPI defines both the format of the query to the server, and the response from the server. The metadata is lightweight, focusing on use rather than discovery, and the data format is a streaming one, with Comma Separated Values (CSV) being required and binary or JSON streaming being optional. The HAPI specification is available at GitHub, where projects are also underway to develop reference implementation servers that data providers can adapt and use at their own sites. Also in the works are data analysis clients in multiple languages (IDL, Python, Matlab, and Java). Institutions which have agreed to adopt HAPI include Goddard (CDAWeb for data and CCMC for models), LASP at the University of Colorado Boulder, the Particles and Plasma Interactions node of the Planetary Data System (PPI/PDS) at UCLA, the Plasma Wave Group at the University of Iowa, the Space Sector at the Johns Hopkins Applied Physics Lab (APL), and the tsds.org site maintained at George Mason University. Over the next year, the adoption of a uniform way to access time series data is expected to significantly enhance interoperability within the Heliophysics data environment. https://github.com/hapi-server/data-specification

Research on Automatic Ticketing Interface Design of Tianjin South Station under the Background of Aging

NASA Astrophysics Data System (ADS)

Zhenghui, Zhao

2018-04-01

Based on the context of increasingly serious aging problem in China, the psychological characteristics of elders in using public self-service facilities and the development status and the future trend of public self-service ticketing service. The approach is analysing physiological and psychological characteristics, education level of the elderly and studying its characteristics of consumer psychology and regional cultural characteristics profoundly before conducting comprehensive analysis and research in combination with the interface features of public self-service ticketing machine. The interface design will be more personalized, intelligent, regional and international. Strategies of caring for the elderly in the regional public self-service facility interface design innovation develops the concept of taking care of the elderly in the entire region as an indispensable people-benefiting optimization system in the modern social services.

A Service Brokering and Recommendation Mechanism for Better Selecting Cloud Services

PubMed Central

Gui, Zhipeng; Yang, Chaowei; Xia, Jizhe; Huang, Qunying; Liu, Kai; Li, Zhenlong; Yu, Manzhu; Sun, Min; Zhou, Nanyin; Jin, Baoxuan

2014-01-01

Cloud computing is becoming the new generation computing infrastructure, and many cloud vendors provide different types of cloud services. How to choose the best cloud services for specific applications is very challenging. Addressing this challenge requires balancing multiple factors, such as business demands, technologies, policies and preferences in addition to the computing requirements. This paper recommends a mechanism for selecting the best public cloud service at the levels of Infrastructure as a Service (IaaS) and Platform as a Service (PaaS). A systematic framework and associated workflow include cloud service filtration, solution generation, evaluation, and selection of public cloud services. Specifically, we propose the following: a hierarchical information model for integrating heterogeneous cloud information from different providers and a corresponding cloud information collecting mechanism; a cloud service classification model for categorizing and filtering cloud services and an application requirement schema for providing rules for creating application-specific configuration solutions; and a preference-aware solution evaluation mode for evaluating and recommending solutions according to the preferences of application providers. To test the proposed framework and methodologies, a cloud service advisory tool prototype was developed after which relevant experiments were conducted. The results show that the proposed system collects/updates/records the cloud information from multiple mainstream public cloud services in real-time, generates feasible cloud configuration solutions according to user specifications and acceptable cost predication, assesses solutions from multiple aspects (e.g., computing capability, potential cost and Service Level Agreement, SLA) and offers rational recommendations based on user preferences and practical cloud provisioning; and visually presents and compares solutions through an interactive web Graphical User Interface (GUI). PMID:25170937

Modular VO oriented Java EE service deployer

NASA Astrophysics Data System (ADS)

Molinaro, Marco; Cepparo, Francesco; De Marco, Marco; Knapic, Cristina; Apollo, Pietro; Smareglia, Riccardo

2014-07-01

The International Virtual Observatory Alliance (IVOA) has produced many standards and recommendations whose aim is to generate an architecture that starts from astrophysical resources, in a general sense, and ends up in deployed consumable services (that are themselves astrophysical resources). Focusing on the Data Access Layer (DAL) system architecture, that these standards define, in the last years a web based application has been developed and maintained at INAF-OATs IA2 (Italian National institute for Astrophysics - Astronomical Observatory of Trieste, Italian center of Astronomical Archives) to try to deploy and manage multiple VO (Virtual Observatory) services in a uniform way: VO-Dance. However a set of criticalities have arisen since when the VO-Dance idea has been produced, plus some major changes underwent and are undergoing at the IVOA DAL layer (and related standards): this urged IA2 to identify a new solution for its own service layer. Keeping on the basic ideas from VO-Dance (simple service configuration, service instantiation at call time and modularity) while switching to different software technologies (e.g. dismissing Java Reflection in favour of Enterprise Java Bean, EJB, based solution), the new solution has been sketched out and tested for feasibility. Here we present the results originating from this test study. The main constraints for this new project come from various fields. A better homogenized solution rising from IVOA DAL standards: for example the new DALI (Data Access Layer Interface) specification that acts as a common interface system for previous and oncoming access protocols. The need for a modular system where each component is based upon a single VO specification allowing services to rely on common capabilities instead of homogenizing them inside service components directly. The search for a scalable system that takes advantage from distributed systems. The constraints find answer in the adopted solutions hereafter sketched. The development of the new system using Java Enterprise technologies can better benefit from existing libraries to build up the single tokens implementing the IVOA standards. Each component can be built from single standards and each deployed service (i.e. service components instantiations) can consume the other components' exposed methods and services without the need of homogenizing them in dedicated libraries. Scalability can be achieved in an easier way by deploying components or sets of services on a distributed environment and using JNDI (Java Naming and Directory Interface) and RMI (Remote Method Invocation) technologies. Single service configuration will not be significantly different from the VO-Dance solution given that Java class instantiation that benefited from Java Reflection will only be moved to Java EJB pooling (and not, e.g. embedded in bundles for subsequent deployment).

User-Friendly Interface Developed for a Web-Based Service for SpaceCAL Emulations

NASA Technical Reports Server (NTRS)

Liszka, Kathy J.; Holtz, Allen P.

2004-01-01

A team at the NASA Glenn Research Center is developing a Space Communications Architecture Laboratory (SpaceCAL) for protocol development activities for coordinated satellite missions. SpaceCAL will provide a multiuser, distributed system to emulate space-based Internet architectures, backbone networks, formation clusters, and constellations. As part of a new effort in 2003, building blocks are being defined for an open distributed system to make the satellite emulation test bed accessible through an Internet connection. The first step in creating a Web-based service to control the emulation remotely is providing a user-friendly interface for encoding the data into a well-formed and complete Extensible Markup Language (XML) document. XML provides coding that allows data to be transferred between dissimilar systems. Scenario specifications include control parameters, network routes, interface bandwidths, delay, and bit error rate. Specifications for all satellite, instruments, and ground stations in a given scenario are also included in the XML document. For the SpaceCAL emulation, the XML document can be created using XForms, a Webbased forms language for data collection. Contrary to older forms technology, the interactive user interface makes the science prevalent, not the data representation. Required versus optional input fields, default values, automatic calculations, data validation, and reuse will help researchers quickly and accurately define missions. XForms can apply any XML schema defined for the test mission to validate data before forwarding it to the emulation facility. New instrument definitions, facilities, and mission types can be added to the existing schema. The first prototype user interface incorporates components for interactive input and form processing. Internet address, data rate, and the location of the facility are implemented with basic form controls with default values provided for convenience and efficiency using basic XForms operations. Because different emulation scenarios will vary widely in their component structure, more complex operations are used to add and delete facilities.

75 FR 70128 - 2011 Changes for Domestic Mailing Services

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

...LOT, RDI, and Five-Digit ZIP. The Postal Service certifies software meeting its standards until the... Delivery Point Validation (DPV) service in conjunction with CASS-Certified address matching software... interface between address-matching software and the LACS \\Link\\ database service. 1.21.2 Interface...

OpenSearch technology for geospatial resources discovery

NASA Astrophysics Data System (ADS)

Papeschi, Fabrizio; Enrico, Boldrini; Mazzetti, Paolo

2010-05-01

In 2005, the term Web 2.0 has been coined by Tim O'Reilly to describe a quickly growing set of Web-based applications that share a common philosophy of "mutually maximizing collective intelligence and added value for each participant by formalized and dynamic information sharing". Around this same period, OpenSearch a new Web 2.0 technology, was developed. More properly, OpenSearch is a collection of technologies that allow publishing of search results in a format suitable for syndication and aggregation. It is a way for websites and search engines to publish search results in a standard and accessible format. Due to its strong impact on the way the Web is perceived by users and also due its relevance for businesses, Web 2.0 has attracted the attention of both mass media and the scientific community. This explosive growth in popularity of Web 2.0 technologies like OpenSearch, and practical applications of Service Oriented Architecture (SOA) resulted in an increased interest in similarities, convergence, and a potential synergy of these two concepts. SOA is considered as the philosophy of encapsulating application logic in services with a uniformly defined interface and making these publicly available via discovery mechanisms. Service consumers may then retrieve these services, compose and use them according to their current needs. A great degree of similarity between SOA and Web 2.0 may be leading to a convergence between the two paradigms. They also expose divergent elements, such as the Web 2.0 support to the human interaction in opposition to the typical SOA machine-to-machine interaction. According to these considerations, the Geospatial Information (GI) domain, is also moving first steps towards a new approach of data publishing and discovering, in particular taking advantage of the OpenSearch technology. A specific GI niche is represented by the OGC Catalog Service for Web (CSW) that is part of the OGC Web Services (OWS) specifications suite, which provides a set of services for discovery, access, and processing of geospatial resources in a SOA framework. GI-cat is a distributed CSW framework implementation developed by the ESSI Lab of the Italian National Research Council (CNR-IMAA) and the University of Florence. It provides brokering and mediation functionalities towards heterogeneous resources and inventories, exposing several standard interfaces for query distribution. This work focuses on a new GI-cat interface which allows the catalog to be queried according to the OpenSearch syntax specification, thus filling the gap between the SOA architectural design of the CSW and the Web 2.0. At the moment, there is no OGC standard specification about this topic, but an official change request has been proposed in order to enable the OGC catalogues to support OpenSearch queries. In this change request, an OpenSearch extension is proposed providing a standard mechanism to query a resource based on temporal and geographic extents. Two new catalog operations are also proposed, in order to publish a suitable OpenSearch interface. This extended interface is implemented by the modular GI-cat architecture adding a new profiling module called "OpenSearch profiler". Since GI-cat also acts as a clearinghouse catalog, another component called "OpenSearch accessor" is added in order to access OpenSearch compliant services. An important role in the GI-cat extension, is played by the adopted mapping strategy. Two different kind of mappings are required: query, and response elements mapping. Query mapping is provided in order to fit the simple OpenSearch query syntax to the complex CSW query expressed by the OGC Filter syntax. GI-cat internal data model is based on the ISO-19115 profile, that is more complex than the simple XML syndication formats, such as RSS 2.0 and Atom 1.0, suggested by OpenSearch. Once response elements are available, in order to be presented, they need to be translated from the GI-cat internal data model, to the above mentioned syndication formats; the mapping processing, is bidirectional. When GI-cat is used to access OpenSearch compliant services, the CSW query must be mapped to the OpenSearch query, and the response elements, must be translated according to the GI-cat internal data model. As results of such extensions, GI-cat provides a user friendly facade to the complex CSW interface, thus enabling it to be queried, for example, using a browser toolbar.

Llnking the EarthScope Data Virtual Catalog to the GEON Portal

NASA Astrophysics Data System (ADS)

Lin, K.; Memon, A.; Baru, C.

2008-12-01

The EarthScope Data Portal provides a unified, single-point of access to EarthScope data and products from USArray, Plate Boundary Observatory (PBO), and San Andreas Fault Observatory at Depth (SAFOD) experiments. The portal features basic search and data access capabilities to allow users to discover and access EarthScope data using spatial, temporal, and other metadata-based (data type, station specific) search conditions. The portal search module is the user interface implementation of the EarthScope Data Search Web Service. This Web Service acts as a virtual catalog that in turn invokes Web services developed by IRIS (Incorporated Research Institutions for Seismology), UNAVCO (University NAVSTAR Consortium), and GFZ (German Research Center for Geosciences) to search for EarthScope data in the archives at each of these locations. These Web Services provide information about all resources (data) that match the specified search conditions. In this presentation we will describe how the EarthScope Data Search Web service can be integrated into the GEONsearch application in the GEON Portal (see http://portal.geongrid.org). Thus, a search request issued at the GEON Portal will also search the EarthScope virtual catalog thereby providing users seamless access to data in GEON as well as the Earthscope via a common user interface.

MyOcean Information System : achievements and perspectives

NASA Astrophysics Data System (ADS)

Loubrieu, T.; Dorandeu, J.; Claverie, V.; Cordier, K.; Barzic, Y.; Lauret, O.; Jolibois, T.; Blower, J.

2012-04-01

MyOcean system (http://www.myocean.eu) objective is to provide a Core Service for the Ocean. This means MyOcean is setting up an operational service for forecasts, analysis and expertise on ocean currents, temperature, salinity, sea level, primary ecosystems and ice coverage. The production of observation and forecasting data is distributed through 12 production centres. The interface with the external users (including web portal) and the coordination of the overall service is managed by a component called service desk. Besides, a transverse component called MIS (myOcean Information System) aims at connecting the production centres and service desk together, manage the shared information for the overall system and implement a standard Inspire interface for the external world. 2012 is a key year for the system. The MyOcean, 3-year project, which has set up the first versions of the system is ending. The MyOcean II, 2-year project, which will upgrade and consolidate the system is starting. Both projects are granted by the European commission within the GMES Program (7th Framework Program). At the end of the MyOcean project, the system has been designed and the 2 first versions have been implemented. The system now offers an integrated service composed with 237 ocean products. The ocean products are homogeneously described in a catalogue. They can be visualized and downloaded by the user (identified with a unique login) through a seamless web interface. The discovery and viewing interfaces are INSPIRE compliant. The data production, subsystems availability and audience are continuously monitored. The presentation will detail the implemented information system architecture and the chosen software solutions. Regarding the information system, MyOcean II is mainly aiming at consolidating the existing functions and promoting the operations cost-effectiveness. In addition, a specific effort will be done so that the less common data features of the system (ocean in-situ observations, remote-sensing along track observations) reach the same level of interoperability for view and download function as the gridded features. The presentation will detail the envisioned plans.

E-DECIDER Decision Support Gateway For Earthquake Disaster Response

NASA Astrophysics Data System (ADS)

Glasscoe, M. T.; Stough, T. M.; Parker, J. W.; Burl, M. C.; Donnellan, A.; Blom, R. G.; Pierce, M. E.; Wang, J.; Ma, Y.; Rundle, J. B.; Yoder, M. R.

2013-12-01

Earthquake Data Enhanced Cyber-Infrastructure for Disaster Evaluation and Response (E-DECIDER) is a NASA-funded project developing capabilities for decision-making utilizing remote sensing data and modeling software in order to provide decision support for earthquake disaster management and response. E-DECIDER incorporates earthquake forecasting methodology and geophysical modeling tools developed through NASA's QuakeSim project in order to produce standards-compliant map data products to aid in decision-making following an earthquake. Remote sensing and geodetic data, in conjunction with modeling and forecasting tools, help provide both long-term planning information for disaster management decision makers as well as short-term information following earthquake events (i.e. identifying areas where the greatest deformation and damage has occurred and emergency services may need to be focused). E-DECIDER utilizes a service-based GIS model for its cyber-infrastructure in order to produce standards-compliant products for different user types with multiple service protocols (such as KML, WMS, WFS, and WCS). The goal is to make complex GIS processing and domain-specific analysis tools more accessible to general users through software services as well as provide system sustainability through infrastructure services. The system comprises several components, which include: a GeoServer for thematic mapping and data distribution, a geospatial database for storage and spatial analysis, web service APIs, including simple-to-use REST APIs for complex GIS functionalities, and geoprocessing tools including python scripts to produce standards-compliant data products. These are then served to the E-DECIDER decision support gateway (http://e-decider.org), the E-DECIDER mobile interface, and to the Department of Homeland Security decision support middleware UICDS (Unified Incident Command and Decision Support). The E-DECIDER decision support gateway features a web interface that delivers map data products including deformation modeling results (slope change and strain magnitude) and aftershock forecasts, with remote sensing change detection results under development. These products are event triggered (from the USGS earthquake feed) and will be posted to event feeds on the E-DECIDER webpage and accessible via the mobile interface and UICDS. E-DECIDER also features a KML service that provides infrastructure information from the FEMA HAZUS database through UICDS and the mobile interface. The back-end GIS service architecture and front-end gateway components form a decision support system that is designed for ease-of-use and extensibility for end-users.

A Question of Interface Design: How Do Online Service GUIs Measure Up?

ERIC Educational Resources Information Center

Head, Alison J.

1997-01-01

Describes recent improvements in graphical user interfaces (GUIs) offered by online services. Highlights include design considerations, including computer engineering capabilities and users' abilities; fundamental GUI design principles; user empowerment; visual communication and interaction; and an evaluation of online search interfaces. (LRW)

47 CFR 76.1205 - Availability of interface information.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Availability of interface information. 76.1205 Section 76.1205 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Competitive Availability of Navigation Devices § 76.1205 Availability of interface information....

Ionosphere Waves Service - A demonstration

NASA Astrophysics Data System (ADS)

Crespon, François

2013-04-01

In the frame of the FP7 POPDAT project the Ionosphere Waves Service was developed by ionosphere experts to answer several questions: How make the old ionosphere missions more valuable? How provide scientific community with a new insight on wave processes that take place in the ionosphere? The answer is a unique data mining service accessing a collection of topical catalogues that characterize a huge number of Atmospheric Gravity Waves, Travelling Ionosphere Disturbances and Whistlers events. The Ionosphere Waves Service regroups databases of specific events extracted by experts from a ten of ionosphere missions which end users can access by applying specific searches and by using statistical analysis modules for their domain of interest. The scientific applications covered by the IWS are relative to earthquake precursors, ionosphere climatology, geomagnetic storms, troposphere-ionosphere energy transfer, and trans-ionosphere link perturbations. In this presentation we propose to detail the service design, the hardware and software architecture, and the service functions. The service interface and capabilities will be the focus of a demonstration in order to help potential end-users for their first access to the Ionosphere Waves Service portal. This work is made with the support of FP7 grant # 263240.

Processing biological literature with customizable Web services supporting interoperable formats.

PubMed

Rak, Rafal; Batista-Navarro, Riza Theresa; Carter, Jacob; Rowley, Andrew; Ananiadou, Sophia

2014-01-01

Web services have become a popular means of interconnecting solutions for processing a body of scientific literature. This has fuelled research on high-level data exchange formats suitable for a given domain and ensuring the interoperability of Web services. In this article, we focus on the biological domain and consider four interoperability formats, BioC, BioNLP, XMI and RDF, that represent domain-specific and generic representations and include well-established as well as emerging specifications. We use the formats in the context of customizable Web services created in our Web-based, text-mining workbench Argo that features an ever-growing library of elementary analytics and capabilities to build and deploy Web services straight from a convenient graphical user interface. We demonstrate a 2-fold customization of Web services: by building task-specific processing pipelines from a repository of available analytics, and by configuring services to accept and produce a combination of input and output data interchange formats. We provide qualitative evaluation of the formats as well as quantitative evaluation of automatic analytics. The latter was carried out as part of our participation in the fourth edition of the BioCreative challenge. Our analytics built into Web services for recognizing biochemical concepts in BioC collections achieved the highest combined scores out of 10 participating teams. Database URL: http://argo.nactem.ac.uk. © The Author(s) 2014. Published by Oxford University Press.

Processing biological literature with customizable Web services supporting interoperable formats

PubMed Central

Rak, Rafal; Batista-Navarro, Riza Theresa; Carter, Jacob; Rowley, Andrew; Ananiadou, Sophia

2014-01-01

Web services have become a popular means of interconnecting solutions for processing a body of scientific literature. This has fuelled research on high-level data exchange formats suitable for a given domain and ensuring the interoperability of Web services. In this article, we focus on the biological domain and consider four interoperability formats, BioC, BioNLP, XMI and RDF, that represent domain-specific and generic representations and include well-established as well as emerging specifications. We use the formats in the context of customizable Web services created in our Web-based, text-mining workbench Argo that features an ever-growing library of elementary analytics and capabilities to build and deploy Web services straight from a convenient graphical user interface. We demonstrate a 2-fold customization of Web services: by building task-specific processing pipelines from a repository of available analytics, and by configuring services to accept and produce a combination of input and output data interchange formats. We provide qualitative evaluation of the formats as well as quantitative evaluation of automatic analytics. The latter was carried out as part of our participation in the fourth edition of the BioCreative challenge. Our analytics built into Web services for recognizing biochemical concepts in BioC collections achieved the highest combined scores out of 10 participating teams. Database URL: http://argo.nactem.ac.uk. PMID:25006225

Automatic geospatial information Web service composition based on ontology interface matching

NASA Astrophysics Data System (ADS)

Xu, Xianbin; Wu, Qunyong; Wang, Qinmin

2008-10-01

With Web services technology the functions of WebGIS can be presented as a kind of geospatial information service, and helped to overcome the limitation of the information-isolated situation in geospatial information sharing field. Thus Geospatial Information Web service composition, which conglomerates outsourced services working in tandem to offer value-added service, plays the key role in fully taking advantage of geospatial information services. This paper proposes an automatic geospatial information web service composition algorithm that employed the ontology dictionary WordNet to analyze semantic distances among the interfaces. Through making matching between input/output parameters and the semantic meaning of pairs of service interfaces, a geospatial information web service chain can be created from a number of candidate services. A practice of the algorithm is also proposed and the result of it shows the feasibility of this algorithm and the great promise in the emerging demand for geospatial information web service composition.

Gesture-controlled interfaces for self-service machines and other applications

NASA Technical Reports Server (NTRS)

Cohen, Charles J. (Inventor); Jacobus, Charles J. (Inventor); Paul, George (Inventor); Beach, Glenn (Inventor); Foulk, Gene (Inventor); Obermark, Jay (Inventor); Cavell, Brook (Inventor)

2004-01-01

A gesture recognition interface for use in controlling self-service machines and other devices is disclosed. A gesture is defined as motions and kinematic poses generated by humans, animals, or machines. Specific body features are tracked, and static and motion gestures are interpreted. Motion gestures are defined as a family of parametrically delimited oscillatory motions, modeled as a linear-in-parameters dynamic system with added geometric constraints to allow for real-time recognition using a small amount of memory and processing time. A linear least squares method is preferably used to determine the parameters which represent each gesture. Feature position measure is used in conjunction with a bank of predictor bins seeded with the gesture parameters, and the system determines which bin best fits the observed motion. Recognizing static pose gestures is preferably performed by localizing the body/object from the rest of the image, describing that object, and identifying that description. The disclosure details methods for gesture recognition, as well as the overall architecture for using gesture recognition to control of devices, including self-service machines.

Power User Interface

NASA Technical Reports Server (NTRS)

Pfister, Robin; McMahon, Joe

2006-01-01

Power User Interface 5.0 (PUI) is a system of middleware, written for expert users in the Earth-science community, PUI enables expedited ordering of data granules on the basis of specific granule-identifying information that the users already know or can assemble. PUI also enables expert users to perform quick searches for orderablegranule information for use in preparing orders. PUI 5.0 is available in two versions (note: PUI 6.0 has command-line mode only): a Web-based application program and a UNIX command-line- mode client program. Both versions include modules that perform data-granule-ordering functions in conjunction with external systems. The Web-based version works with Earth Observing System Clearing House (ECHO) metadata catalog and order-entry services and with an open-source order-service broker server component, called the Mercury Shopping Cart, that is provided separately by Oak Ridge National Laboratory through the Department of Energy. The command-line version works with the ECHO metadata and order-entry process service. Both versions of PUI ultimately use ECHO to process an order to be sent to a data provider. Ordered data are provided through means outside the PUI software system.

How Student-Teachers Approach the Teaching of Reading: At the Interface between Personal History, Theory and Practice

ERIC Educational Resources Information Center

Pitfield, Maggie; Obied, Vicky

2010-01-01

This article charts the progress of one cohort of student-teachers (variously known as beginning teachers and pre-service teachers) training to teach English in London secondary schools during 2008-9. The research focuses specifically on the experiences which facilitate their development as confident and creative teachers and assessors of reading…

Offering memorable patient experience through creative, dynamic marketing strategy

PubMed Central

Raţiu, M; Purcărea, T

2008-01-01

Creative, dynamic strategies are the ones that identify new and better ways of uniquely offering the target customers what they want or need. A business can achieve competitive advantage if it chooses a marketing strategy that sets the business apart from anyone else. Healthcare services companies have to understand that the customer should be placed in the centre of all specific marketing operations. The brand message should reflect the focus on the patient. Healthcare products and services offered must represent exactly the solutions that customers expect. The touchpoints with the patients must be well mastered in order to convince them to accept the proposed solutions. Healthcare service providers must be capable to look beyond customer's behaviour or product and healthcare service aquisition. This will demand proactive and far–reaching changes, including focusing specifically on customer preference, quality, and technological interfaces; rewiring strategy to find new value from existing and unfamiliar sources; disintegrating and radically reassembling operational processes; and restructuring the organization to accommodate new typess of work and skill. PMID:20108466

Offering memorable patient experience through creative, dynamic marketing strategy.

PubMed

Purcărea, Victor Lorín; Raţíu, Monica; Purcărea, Theodor; Davila, Carol

2008-01-01

Creative, dynamic strategies are the ones that identify new and better ways of uniquely offering the target customers what they want or need. A business can achieve competitive advantage if it chooses a marketing strategy that sets the business apart from anyone else. Healthcare services companies have to understand that the customer should be placed in the centre of all specific marketing operations. The brand message should reflect the focus on the patient. Healthcare products and services offered must represent exactly the solutions that customers expect. The touchpoints with the patients must be well mastered in order to convince them to accept the proposed solutions. Healthcare service providers must be capable to look beyond customer's behaviour or product and healthcare service aquisition. This will demand proactive and far-reaching changes, including focusing specifically on customer preference, quality, and technological interfaces; rewiring strategy to find new value from existing and unfamiliar sources: disintegrating and radically reassembling operational processes: and restructuring the organization to accommodate new types of work and skill.

Conditions Database for the Belle II Experiment

NASA Astrophysics Data System (ADS)

Wood, L.; Elsethagen, T.; Schram, M.; Stephan, E.

2017-10-01

The Belle II experiment at KEK is preparing for first collisions in 2017. Processing the large amounts of data that will be produced will require conditions data to be readily available to systems worldwide in a fast and efficient manner that is straightforward for both the user and maintainer. The Belle II conditions database was designed with a straightforward goal: make it as easily maintainable as possible. To this end, HEP-specific software tools were avoided as much as possible and industry standard tools used instead. HTTP REST services were selected as the application interface, which provide a high-level interface to users through the use of standard libraries such as curl. The application interface itself is written in Java and runs in an embedded Payara-Micro Java EE application server. Scalability at the application interface is provided by use of Hazelcast, an open source In-Memory Data Grid (IMDG) providing distributed in-memory computing and supporting the creation and clustering of new application interface instances as demand increases. The IMDG provides fast and efficient access to conditions data via in-memory caching.

NEXUS - Resilient Intelligent Middleware

NASA Astrophysics Data System (ADS)

Kaveh, N.; Hercock, R. Ghanea

Service-oriented computing, a composition of distributed-object computing, component-based, and Web-based concepts, is becoming the widespread choice for developing dynamic heterogeneous software assets available as services across a network. One of the major strengths of service-oriented technologies is the high abstraction layer and large granularity level at which software assets are viewed compared to traditional object-oriented technologies. Collaboration through encapsulated and separately defined service interfaces creates a service-oriented environment, whereby multiple services can be linked together through their interfaces to compose a functional system. This approach enables better integration of legacy and non-legacy services, via wrapper interfaces, and allows for service composition at a more abstract level especially in cases such as vertical market stacks. The heterogeneous nature of service-oriented technologies and the granularity of their software components makes them a suitable computing model in the pervasive domain.

Customer concerns regarding satellite servicing

NASA Technical Reports Server (NTRS)

Rysavy, Gordon

1987-01-01

The organization of orbital servicing of satellites is discussed. Provision of servicing equipment; design interfaces between the satellite and the servicing equipment; and the economic viability of the concept are discussed. The proposed solution for satisfying customer concerns is for the servicing organizations to baseline an adequate inventory of servicing equipment with standard interfaces and established servicing costs. With this knowledge, the customer can conduct tradeoff studies and make programmatic decisions regarding servicing options. A dialog procedure between customers and servicing specialists is outlined.

The flight telerobotic servicer: From functional architecture to computer architecture

NASA Technical Reports Server (NTRS)

Lumia, Ronald; Fiala, John

1989-01-01

After a brief tutorial on the NASA/National Bureau of Standards Standard Reference Model for Telerobot Control System Architecture (NASREM) functional architecture, the approach to its implementation is shown. First, interfaces must be defined which are capable of supporting the known algorithms. This is illustrated by considering the interfaces required for the SERVO level of the NASREM functional architecture. After interface definition, the specific computer architecture for the implementation must be determined. This choice is obviously technology dependent. An example illustrating one possible mapping of the NASREM functional architecture to a particular set of computers which implements it is shown. The result of choosing the NASREM functional architecture is that it provides a technology independent paradigm which can be mapped into a technology dependent implementation capable of evolving with technology in the laboratory and in space.

Generic worklist handler for workflow-enabled products

NASA Astrophysics Data System (ADS)

Schmidt, Joachim; Meetz, Kirsten; Wendler, Thomas

1999-07-01

Workflow management (WfM) is an emerging field of medical information technology. It appears as a promising key technology to model, optimize and automate processes, for the sake of improved efficiency, reduced costs and improved patient care. The Application of WfM concepts requires the standardization of architectures and interfaces. A component of central interest proposed in this report is a generic work list handler: A standardized interface between a workflow enactment service and application system. Application systems with embedded work list handlers will be called 'Workflow Enabled Application Systems'. In this paper we discus functional requirements of work list handlers, as well as their integration into workflow architectures and interfaces. To lay the foundation for this specification, basic workflow terminology, the fundamentals of workflow management and - later in the paper - the available standards as defined by the Workflow Management Coalition are briefly reviewed.

AGUIA: autonomous graphical user interface assembly for clinical trials semantic data services

PubMed Central

2010-01-01

Background AGUIA is a front-end web application originally developed to manage clinical, demographic and biomolecular patient data collected during clinical trials at MD Anderson Cancer Center. The diversity of methods involved in patient screening and sample processing generates a variety of data types that require a resource-oriented architecture to capture the associations between the heterogeneous data elements. AGUIA uses a semantic web formalism, resource description framework (RDF), and a bottom-up design of knowledge bases that employ the S3DB tool as the starting point for the client's interface assembly. Methods The data web service, S3DB, meets the necessary requirements of generating the RDF and of explicitly distinguishing the description of the domain from its instantiation, while allowing for continuous editing of both. Furthermore, it uses an HTTP-REST protocol, has a SPARQL endpoint, and has open source availability in the public domain, which facilitates the development and dissemination of this application. However, S3DB alone does not address the issue of representing content in a form that makes sense for domain experts. Results We identified an autonomous set of descriptors, the GBox, that provides user and domain specifications for the graphical user interface. This was achieved by identifying a formalism that makes use of an RDF schema to enable the automatic assembly of graphical user interfaces in a meaningful manner while using only resources native to the client web browser (JavaScript interpreter, document object model). We defined a generalized RDF model such that changes in the graphic descriptors are automatically and immediately (locally) reflected into the configuration of the client's interface application. Conclusions The design patterns identified for the GBox benefit from and reflect the specific requirements of interacting with data generated by clinical trials, and they contain clues for a general purpose solution to the challenge of having interfaces automatically assembled for multiple and volatile views of a domain. By coding AGUIA in JavaScript, for which all browsers include a native interpreter, a solution was found that assembles interfaces that are meaningful to the particular user, and which are also ubiquitous and lightweight, allowing the computational load to be carried by the client's machine. PMID:20977768

High school students as a seismic network analysts

NASA Astrophysics Data System (ADS)

Filatov, P.; Fedorenko, Yu.; Beketova, E.; Husebye, E.

2003-04-01

Many research organizations have a large amount of collected seismological data. Some data centers keep data closed from scientists, others have a specific interfaces for access, what is not acceptable for education. For SeisSchool Network in Norway we have developed an universal interface for research and study. The main principles of our interface are: bullet Accessibility - it should provides data access for everybody any where via Internet without restrictions of hardware platform, operational system, Internet browser or bandwidth of connection. bullet Informativity - it should visualize data, have examples of processing routines (filters, envelopes) including phase picking and event location. Also it provides access to various seismology information. bullet Scalability - provide storage for various types of seismic data and a multitude of services for many user levels. This interface (http://pcg1.ifjf.uib.no) helps analysts in basic research and together with information of our Web site we introduces students to theory and practice of seismology. Based on our Web interface group of students won a Norwegian Young Scientists award. In this presentation we demonstrate advantages of our interface, on-line data processing and how to monitoring our network in near real time.

A resource-oriented architecture for a Geospatial Web

NASA Astrophysics Data System (ADS)

Mazzetti, Paolo; Nativi, Stefano

2010-05-01

In this presentation we discuss some architectural issues on the design of an architecture for a Geospatial Web, that is an information system for sharing geospatial resources according to the Web paradigm. The success of the Web in building a multi-purpose information space, has raised questions about the possibility of adopting the same approach for systems dedicated to the sharing of more specific resources, such as the geospatial information, that is information characterized by spatial/temporal reference. To this aim an investigation on the nature of the Web and on the validity of its paradigm for geospatial resources is required. The Web was born in the early 90's to provide "a shared information space through which people and machines could communicate" [Berners-Lee 1996]. It was originally built around a small set of specifications (e.g. URI, HTTP, HTML, etc.); however, in the last two decades several other technologies and specifications have been introduced in order to extend its capabilities. Most of them (e.g. the SOAP family) actually aimed to transform the Web in a generic Distributed Computing Infrastructure. While these efforts were definitely successful enabling the adoption of service-oriented approaches for machine-to-machine interactions supporting complex business processes (e.g. for e-Government and e-Business applications), they do not fit in the original concept of the Web. In the year 2000, R. T. Fielding, one of the designers of the original Web specifications, proposes a new architectural style for distributed systems, called REST (Representational State Transfer), aiming to capture the fundamental characteristics of the Web as it was originally conceived [Fielding 2000]. In this view, the nature of the Web lies not so much in the technologies, as in the way they are used. Maintaining the Web architecture conform to the REST style would then assure the scalability, extensibility and low entry barrier of the original Web. On the contrary, systems using the same Web technologies and specifications but according to a different architectural style, despite their usefulness, should not be considered part of the Web. If the REST style captures the significant Web characteristics, then, in order to build a Geospatial Web it is necessary that its architecture satisfies all the REST constraints. One of them is of particular importance: the adoption of a Uniform Interface. It prescribes that all the geospatial resources must be accessed through the same interface; moreover according to the REST style this interface must satisfy four further constraints: a) identification of resources; b) manipulation of resources through representations; c) self-descriptive messages; and, d) hypermedia as the engine of application state. In the Web, the uniform interface provides basic operations which are meaningful for generic resources. They typically implement the CRUD pattern (Create-Retrieve-Update-Delete) which demonstrated to be flexible and powerful in several general-purpose contexts (e.g. filesystem management, SQL for database management systems, etc.). Restricting the scope to a subset of resources it would be possible to identify other generic actions which are meaningful for all of them. For example for geospatial resources, subsetting, resampling, interpolation and coordinate reference systems transformations functionalities are candidate functionalities for a uniform interface. However an investigation is needed to clarify the semantics of those actions for different resources, and consequently if they can really ascend the role of generic interface operation. Concerning the point a), (identification of resources), it is required that every resource addressable in the Geospatial Web has its own identifier (e.g. a URI). This allows to implement citation and re-use of resources, simply providing the URI. OPeNDAP and KVP encodings of OGC data access services specifications might provide a basis for it. Concerning point b) (manipulation of resources through representations), the Geospatial Web poses several issues. In fact, while the Web mainly handles semi-structured information, in the Geospatial Web the information is typically structured with several possible data models (e.g. point series, gridded coverages, trajectories, etc.) and encodings. A possibility would be to simplify the interchange formats, choosing to support a subset of data models and format(s). This is what actually the Web designers did choosing to define a common format for hypermedia (HTML), although the underlying protocol would be generic. Concerning point c), self-descriptive messages, the exchanged messages should describe themselves and their content. This would not be actually a major issue considering the effort put in recent years on geospatial metadata models and specifications. The point d), hypermedia as the engine of application state, is actually where the Geospatial Web would mainly differ from existing geospatial information sharing systems. In fact the existing systems typically adopt a service-oriented architecture, where applications are built as a single service or as a workflow of services. On the other hand, in the Geospatial Web, applications should be built following the path between interconnected resources. The link between resources should be made explicit as hyperlinks. The adoption of Semantic Web solutions would allow to define not only the existence of a link between two resources, but also the nature of the link. The implementation of a Geospatial Web would allow to build an information system with the same characteristics of the Web sharing its points-of-strength and weaknesses. The main advantages would be the following: • The user would interact with the Geospatial Web according to the well-known Web navigation paradigm. This would lower the barrier to the access to geospatial applications for non-specialists (e.g. the success of Google Maps and other Web mapping applications); • Successful Web and Web 2.0 applications - search engines, feeds, social network - could be integrated/replicated in the Geospatial Web; The main drawbacks would be the following: • The Uniform Interface simplifies the overall system architecture (e.g. no service registry, and service descriptors required), but moves the complexity to the data representation. Moreover since the interface must stay generic, it results really simple and therefore complex interactions would require several transfers. • In the geospatial domain one of the most valuable resources are processes (e.g. environmental models). How they can be modeled as resources accessed through the common interface is an open issue. Taking into account advantages and drawback it seems that a Geospatial Web would be useful, but its use would be limited to specific use-cases not covering all the possible applications. The Geospatial Web architecture could be partly based on existing specifications, while other aspects need investigation. References [Berners-Lee 1996] T. Berners-Lee, "WWW: Past, present, and future". IEEE Computer, 29(10), Oct. 1996, pp. 69-77. [Fielding 2000] Fielding, R. T. 2000. Architectural styles and the design of network-based software architectures. PhD Dissertation. Dept. of Information and Computer Science, University of California, Irvine

GI-conf: A configuration tool for the GI-cat distributed catalog

NASA Astrophysics Data System (ADS)

Papeschi, F.; Boldrini, E.; Bigagli, L.; Mazzetti, P.

2009-04-01

In this work we present a configuration tool for the GI-cat. In an Service-Oriented Architecture (SOA) framework, GI-cat implements a distributed catalog service providing advanced capabilities, such as: caching, brokering and mediation functionalities. GI-cat applies a distributed approach, being able to distribute queries to the remote service providers of interest in an asynchronous style, and notifies the status of the queries to the caller implementing an incremental feedback mechanism. Today, GI-cat functionalities are made available through two standard catalog interfaces: the OGC CSW ISO and CSW Core Application Profiles. However, two other interfaces are under testing: the CIM and the EO Extension Packages of the CSW ebRIM Application Profile. GI-cat is able to interface a multiplicity of discovery and access services serving heterogeneous Earth and Space Sciences resources. They include international standards like the OGC Web Services -i.e. OGC CSW, WCS, WFS and WMS, as well as interoperability arrangements (i.e. community standards) such as: UNIDATA THREDDS/OPeNDAP, SeaDataNet CDI (Common Data Index), GBIF (Global Biodiversity Information Facility) services, and SibESS-C infrastructure services. GI-conf implements user-friendly configuration tool for GI-cat. This is a GUI application that employs a visual and very simple approach to configure both the GI-cat publishing and distribution capabilities, in a dynamic way. The tool allows to set one or more GI-cat configurations. Each configuration consists of: a) the catalog standards interfaces published by GI-cat; b) the resources (i.e. services/servers) to be accessed and mediated -i.e. federated. Simple icons are used for interfaces and resources, implementing a user-friendly visual approach. The main GI-conf functionalities are: • Interfaces and federated resources management: user can set which interfaces must be published; besides, she/he can add a new resource, update or remove an already federated resource. • Multiple configuration management: multiple GI-cat configurations can be defined; every configuration identifies a set of published interfaces and a set of federated resources. Configurations can be edited, added, removed, exported, and even imported. • HTML report creation: an HTML report can be created, showing the current active GI-cat configuration, including the resources that are being federated and the published interface endpoints. The configuration tool is shipped with GI-cat and can be used to configure the service after its installation is completed.

A Web-based graphical user interface for evidence-based decision making for health care allocations in rural areas

PubMed Central

Schuurman, Nadine; Leight, Margo; Berube, Myriam

2008-01-01

Background The creation of successful health policy and location of resources increasingly relies on evidence-based decision-making. The development of intuitive, accessible tools to analyse, display and disseminate spatial data potentially provides the basis for sound policy and resource allocation decisions. As health services are rationalized, the development of tools such graphical user interfaces (GUIs) is especially valuable at they assist decision makers in allocating resources such that the maximum number of people are served. GIS can used to develop GUIs that enable spatial decision making. Results We have created a Web-based GUI (wGUI) to assist health policy makers and administrators in the Canadian province of British Columbia make well-informed decisions about the location and allocation of time-sensitive service capacities in rural regions of the province. This tool integrates datasets for existing hospitals and services, regional populations and road networks to allow users to ascertain the percentage of population in any given service catchment who are served by a specific health service, or baskets of linked services. The wGUI allows policy makers to map trauma and obstetric services against rural populations within pre-specified travel distances, illustrating service capacity by region. Conclusion The wGUI can be used by health policy makers and administrators with little or no formal GIS training to visualize multiple health resource allocation scenarios. The GUI is poised to become a critical decision-making tool especially as evidence is increasingly required for distribution of health services. PMID:18793428

78 FR 7416 - Notice of Intent To Prepare an Environmental Impact Statement for Land-Water Interface and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-01

... Statement for Land-Water Interface and Service Pier Extension, Naval Base Kitsap Bangor, Silverdale, WA and... Land-Water Interface (LWI) structures and (2) the proposed construction and operation of a Service Pier... waterfront. Construction is anticipated to take two years. Construction activities occurring in the water...

Translating research into practice through user-centered design: An application for osteoarthritis healthcare planning.

PubMed

Carr, Eloise Cj; Babione, Julie N; Marshall, Deborah

2017-08-01

To identify the needs and requirements of the end users, to inform the development of a user-interface to translate an existing evidence-based decision support tool into a practical and usable interface for health service planning for osteoarthritis (OA) care. We used a user-centered design (UCD) approach that emphasized the role of the end-users and is well-suited to knowledge translation (KT). The first phase used a needs assessment focus group (n=8) and interviews (n=5) with target users (health care planners) within a provincial health care organization. The second phase used a participatory design approach, with two small group sessions (n=6) to explore workflow, thought processes, and needs of intended users. The needs assessment identified five design recommendations: ensuring the user-interface supports the target user group, allowing for user-directed data explorations, input parameter flexibility, clear presentation, and provision of relevant definitions. The second phase identified workflow insights from a proposed scenario. Graphs, the need for a visual overview of the data, and interactivity were key considerations to aid in meaningful use of the model and knowledge translation. A UCD approach is well suited to identify health care planners' requirements when using a decision support tool to improve health service planning and management of OA. We believe this is one of the first applications to be used in planning for health service delivery. We identified specific design recommendations that will increase user acceptability and uptake of the user-interface and underlying decision support tool in practice. Our approach demonstrated how UCD can be used to enable knowledge translation. Copyright © 2017 Elsevier B.V. All rights reserved.

Distributed Multi-interface Catalogue for Geospatial Data

NASA Astrophysics Data System (ADS)

Nativi, S.; Bigagli, L.; Mazzetti, P.; Mattia, U.; Boldrini, E.

2007-12-01

Several geosciences communities (e.g. atmospheric science, oceanography, hydrology) have developed tailored data and metadata models and service protocol specifications for enabling online data discovery, inventory, evaluation, access and download. These specifications are conceived either profiling geospatial information standards or extending the well-accepted geosciences data models and protocols in order to capture more semantics. These artifacts have generated a set of related catalog -and inventory services- characterizing different communities, initiatives and projects. In fact, these geospatial data catalogs are discovery and access systems that use metadata as the target for query on geospatial information. The indexed and searchable metadata provide a disciplined vocabulary against which intelligent geospatial search can be performed within or among communities. There exists a clear need to conceive and achieve solutions to implement interoperability among geosciences communities, in the context of the more general geospatial information interoperability framework. Such solutions should provide search and access capabilities across catalogs, inventory lists and their registered resources. Thus, the development of catalog clearinghouse solutions is a near-term challenge in support of fully functional and useful infrastructures for spatial data (e.g. INSPIRE, GMES, NSDI, GEOSS). This implies the implementation of components for query distribution and virtual resource aggregation. These solutions must implement distributed discovery functionalities in an heterogeneous environment, requiring metadata profiles harmonization as well as protocol adaptation and mediation. We present a catalog clearinghouse solution for the interoperability of several well-known cataloguing systems (e.g. OGC CSW, THREDDS catalog and data services). The solution implements consistent resource discovery and evaluation over a dynamic federation of several well-known cataloguing and inventory systems. Prominent features include: 1)Support to distributed queries over a hierarchical data model, supporting incremental queries (i.e. query over collections, to be subsequently refined) and opaque/translucent chaining; 2)Support to several client protocols, through a compound front-end interface module. This allows to accommodate a (growing) number of cataloguing standards, or profiles thereof, including the OGC CSW interface, ebRIM Application Profile (for Core ISO Metadata and other data models), and the ISO Application Profile. The presented catalog clearinghouse supports both the opaque and translucent pattern for service chaining. In fact, the clearinghouse catalog may be configured either to completely hide the underlying federated services or to provide clients with services information. In both cases, the clearinghouse solution presents a higher level interface (i.e. OGC CSW) which harmonizes multiple lower level services (e.g. OGC CSW, WMS and WCS, THREDDS, etc.), and handles all control and interaction with them. In the translucent case, client has the option to directly access the lower level services (e.g. to improve performances). In the GEOSS context, the solution has been experimented both as a stand-alone user application and as a service framework. The first scenario allows a user to download a multi-platform client software and query a federation of cataloguing systems, that he can customize at will. The second scenario support server-side deployment and can be flexibly adapted to several use-cases, such as intranet proxy, catalog broker, etc.

The Cortex project A quasi-real-time information system to build control systems for high energy physics experiments

NASA Astrophysics Data System (ADS)

Barillere, R.; Cabel, H.; Chan, B.; Goulas, I.; Le Goff, J. M.; Vinot, L.; Willmott, C.; Milcent, H.; Huuskonen, P.

1994-12-01

The Cortex control information system framework is being developed at CERN. It offers basic functions to allow the sharing of information, control and analysis functions; it presents a uniform human interface for such information and functions; it permits upgrades and additions without code modification and it is sufficiently generic to allow its use by most of the existing or future control systems at CERN. Services will include standard interfaces to user-supplied functions, analysis, archive and event management. Cortex does not attempt to carry out the direct data acquisition or control of the devices; these are activities which are highly specific to the application and are best done by commercial systems or user-written programs. Instead, Cortex integrates these application-specific pieces and supports them by supplying other commonly needed facilities such as collaboration, analysis, diagnosis and user assistance.

Evolution of MPCV Service Module Propulsion and GNC Interface Requirements

NASA Technical Reports Server (NTRS)

Hickman, Heather K.; Dickens, Kevin W.; Madsen, Jennifer M.; Gutkowski, Jeffrey P.; Ierardo, Nicola; Jaeger, Markus; Lux, Johannes; Freundenberger, John L.; Paisley, Jonathan

2014-01-01

The Orion Multi-Purpose Crew Vehicle Service Module Propulsion Subsystem provides propulsion for the integrated Crew and Service Module. Updates in the exploration architecture between Constellation and MPCV as well as NASA's partnership with the European Space Agency have resulted in design changes to the SM Propulsion Subsystem and updates to the Propulsion interface requirements with Guidance Navigation and Control. This paper focuses on the Propulsion and GNC interface requirement updates between the Constellation Service Module and the European Service Module and how the requirement updates were driven or supported by architecture updates and the desired use of hardware with heritage to United States and European spacecraft for the Exploration Missions, EM-1 and EM-2.

Modeling Techniques for High Dependability Protocols and Architecture

NASA Technical Reports Server (NTRS)

LaValley, Brian; Ellis, Peter; Walter, Chris J.

2012-01-01

This report documents an investigation into modeling high dependability protocols and some specific challenges that were identified as a result of the experiments. The need for an approach was established and foundational concepts proposed for modeling different layers of a complex protocol and capturing the compositional properties that provide high dependability services for a system architecture. The approach centers around the definition of an architecture layer, its interfaces for composability with other layers and its bindings to a platform specific architecture model that implements the protocols required for the layer.

Applying the Recovery Approach to the Interface between Mental Health and Child Protection Services

ERIC Educational Resources Information Center

Duffy, Joe; Davidson, Gavin; Kavanagh, Damien

2016-01-01

There is a range of theoretical approaches which may inform the interface between child protection and adult mental health services. These theoretical perspectives tend to be focused on either child protection or mental health with no agreed integrating framework. The interface continues to be identified, in research, case management reviews and…

The climate4impact platform: Providing, tailoring and facilitating climate model data access

NASA Astrophysics Data System (ADS)

Pagé, Christian; Pagani, Andrea; Plieger, Maarten; Som de Cerff, Wim; Mihajlovski, Andrej; de Vreede, Ernst; Spinuso, Alessandro; Hutjes, Ronald; de Jong, Fokke; Bärring, Lars; Vega, Manuel; Cofiño, Antonio; d'Anca, Alessandro; Fiore, Sandro; Kolax, Michael

2017-04-01

One of the main objectives of climate4impact is to provide standardized web services and tools that are reusable in other portals. These services include web processing services, web coverage services and web mapping services (WPS, WCS and WMS). Tailored portals can be targeted to specific communities and/or countries/regions while making use of those services. Easier access to climate data is very important for the climate change impact communities. To fulfill this objective, the climate4impact (http://climate4impact.eu/) web portal and services has been developed, targeting climate change impact modellers, impact and adaptation consultants, as well as other experts using climate change data. It provides to users harmonized access to climate model data through tailored services. It features static and dynamic documentation, Use Cases and best practice examples, an advanced search interface, an integrated authentication and authorization system with the Earth System Grid Federation (ESGF), a visualization interface with ADAGUC web mapping tools. In the latest version, statistical downscaling services, provided by the Santander Meteorology Group Downscaling Portal, were integrated. An innovative interface to integrate statistical downscaling services will be released in the upcoming version. The latter will be a big step in bridging the gap between climate scientists and the climate change impact communities. The climate4impact portal builds on the infrastructure of an international distributed database that has been set to disseminate the results from the global climate model results of the Coupled Model Intercomparison project Phase 5 (CMIP5). This database, the ESGF, is an international collaboration that develops, deploys and maintains software infrastructure for the management, dissemination, and analysis of climate model data. The European FP7 project IS-ENES, Infrastructure for the European Network for Earth System modelling, supports the European contribution to ESGF and contributes to the ESGF open source effort, notably through the development of search, monitoring, quality control, and metadata services. In its second phase, IS-ENES2 supports the implementation of regional climate model results from the international Coordinated Regional Downscaling Experiments (CORDEX). These services were extended within the European FP7 Climate Information Portal for Copernicus (CLIPC) project, and some could be later integrated into the European Copernicus platform.

A Case for Data and Service Fusions

NASA Astrophysics Data System (ADS)

Huang, T.; Boening, C.; Quach, N. T.; Gill, K.; Zlotnicki, V.; Moore, B.; Tsontos, V. M.

2015-12-01

In this distributed, data-intensive era, developing any solution that requires multi-disciplinary data and service requires careful review of interfaces with data and service providers. Information is stored in many different locations and data services are distributed across the Internet. In design and development of mash-up heterogeneous data systems, the challenge is not entirely technological; it is our ability to document the external interface specifications and to create a coherent environment for our users. While is impressive to present a complex web of data, the true measure of our success is in the quality of the data we are serving, the throughput of our creation, and user experience. The presentation presents two current funded NASA projects that require integration of heterogeneous data and service that reside in different locations. The NASA Sea Level Change Portal is designed a "one-stop" source for current sea level change information. Behind this portal is an architecture that integrates data and services from various sources, which includes PI-generated products, satellite products from the DAACs, and metadata from ESDIS Common Metadata Repository (CMR) and other sources, and services reside in the data centers, universities, and ESDIS. The recently funded Distributed Oceanographic Matchup Service (DOMS) project is a project under the NASA Advance Information Technology (AIST) program. DOMS will integrate with satellite products managed by NASA Physical Oceanography Distributed Active Archive Center (PO.DAAC) and three different in-situ projects that are located in difference parts of the U.S. These projects are good examples of delivering content-rich solutions through mash-up of heterogeneous data and systems.

Proposal for fulfilling strategic objectives of the U.S. Roadmap for national action on clinical decision support through a service-oriented architecture leveraging HL7 services.

PubMed

Kawamoto, Kensaku; Lobach, David F

2007-01-01

Despite their demonstrated effectiveness, clinical decision support (CDS) systems are not widely used within the U.S. The Roadmap for National Action on Clinical Decision Support, published in June 2006 by the American Medical Informatics Association, identifies six strategic objectives for achieving widespread adoption of effective CDS capabilities. In this manuscript, we propose a Service-Oriented Architecture (SOA) for CDS that facilitates achievement of these six objectives. Within the proposed framework, CDS capabilities are implemented through the orchestration of independent software services whose interfaces are being standardized by Health Level 7 and the Object Management Group through their joint Healthcare Services Specification Project (HSSP). Core services within this framework include the HSSP Decision Support Service, the HSSP Common Terminology Service, and the HSSP Retrieve, Locate, and Update Service. Our experiences, and those of others, indicate that the proposed SOA approach to CDS could enable the widespread adoption of effective CDS within the U.S. health care system.

myChEMBL: a virtual machine implementation of open data and cheminformatics tools.

PubMed

Ochoa, Rodrigo; Davies, Mark; Papadatos, George; Atkinson, Francis; Overington, John P

2014-01-15

myChEMBL is a completely open platform, which combines public domain bioactivity data with open source database and cheminformatics technologies. myChEMBL consists of a Linux (Ubuntu) Virtual Machine featuring a PostgreSQL schema with the latest version of the ChEMBL database, as well as the latest RDKit cheminformatics libraries. In addition, a self-contained web interface is available, which can be modified and improved according to user specifications. The VM is available at: ftp://ftp.ebi.ac.uk/pub/databases/chembl/VM/myChEMBL/current. The web interface and web services code is available at: https://github.com/rochoa85/myChEMBL.

Research and Development for an Operational Information Ecology: The User-System Interface Agent Project

NASA Technical Reports Server (NTRS)

Srivastava, Sadanand; deLamadrid, James

1998-01-01

The User System Interface Agent (USIA) is a special type of software agent which acts as the "middle man" between a human user and an information processing environment. USIA consists of a group of cooperating agents which are responsible for assisting users in obtaining information processing services intuitively and efficiently. Some of the main features of USIA include: (1) multiple interaction modes and (2) user-specific and stereotype modeling and adaptation. This prototype system provides us with a development platform towards the realization of an operational information ecology. In the first phase of this project we focus on the design and implementation of prototype system of the User-System Interface Agent (USIA). The second face of USIA allows user interaction via a restricted query language as well as through a taxonomy of windows. In third phase the USIA system architecture was revised.

The International Solid Earth Research Virtual Observatory

NASA Astrophysics Data System (ADS)

Fox, G.; Pierce, M.; Rundle, J.; Donnellan, A.; Parker, J.; Granat, R.; Lyzenga, G.; McLeod, D.; Grant, L.

2004-12-01

We describe the architecture and initial implementation of the International Solid Earth Research Virtual Observatory (iSERVO). This has been prototyped within the USA as SERVOGrid and expansion is planned to Australia, China, Japan and other countries. We base our design on a globally scalable distributed "cyber-infrastructure" or Grid built around a Web Services-based approach consistent with the extended Web Service Interoperability approach. The Solid Earth Science Working Group of NASA has identified several challenges for Earth Science research. In order to investigate these, we need to couple numerical simulation codes and data mining tools to observational data sets. This observational data are now available on-line in internet-accessible forms, and the quantity of this data is expected to grow explosively over the next decade. We architect iSERVO as a loosely federated Grid of Grids with each country involved supporting a national Solid Earth Research Grid. The national Grid Operations, possibly with dedicated control centers, are linked together to support iSERVO where an International Grid control center may eventually be necessary. We address the difficult multi-administrative domain security and ownership issues by exposing capabilities as services for which the risk of abuse is minimized. We support large scale simulations within a single domain using service-hosted tools (mesh generation, data repository and sensor access, GIS, visualization). Simulations typically involve sequential or parallel machines in a single domain supported by cross-continent services. We use Web Services implement Service Oriented Architecture (SOA) using WSDL for service description and SOAP for message formats. These are augmented by UDDI, WS-Security, WS-Notification/Eventing and WS-ReliableMessaging in the WS-I+ approach. Support for the latter two capabilities will be available over the next 6 months from the NaradaBrokering messaging system. We augment these specifications with the powerful portlet architecture using WSRP and JSR168 supported by such portal containers as uPortal, WebSphere, and Apache JetSpeed2. The latter portal aggregates component user interfaces for each iSERVO service allowing flexible customization of the user interface. We exploit the portlets produced by the NSF NMI (Middleware initiative) OGCE activity. iSERVO also uses specifications from the Open Geographical Information Systems (GIS) Consortium (OGC) that defines a number of standards for modeling earth surface feature data and services for interacting with this data. The data models are expressed in the XML-based Geography Markup Language (GML), and the OGC service framework are being adapted to use the Web Service model. The SERVO prototype includes a GIS Grid that currently includes the core WMS and WFS (Map and Feature) services. We will follow the best practice in the Grid and Web Service field and will adapt our technology as appropriate. For example, we expect to support services built on WS-RF when is finalized and to make use of the database interfaces OGSA-DAI and its WS-I+ versions. Finally, we review advances in Web Service scripting (such as HPSearch) and workflow systems (such as GCF) and their applications to iSERVO.

Software for Remote Monitoring of Space-Station Payloads

NASA Technical Reports Server (NTRS)

Schneider, Michelle; Lippincott, Jeff; Chubb, Steve; Whitaker, Jimmy; Gillis, Robert; Sellers, Donna; Sims, Chris; Rice, James

2003-01-01

Telescience Resource Kit (TReK) is a suite of application programs that enable geographically dispersed users to monitor scientific payloads aboard the International Space Station (ISS). TReK provides local ground support services that can simultaneously receive, process, record, playback, and display data from multiple sources. TReK also provides interfaces to use the remote services provided by the Payload Operations Integration Center which manages all ISS payloads. An application programming interface (API) allows for payload users to gain access to all data processed by TReK and allows payload-specific tools and programs to be built or integrated with TReK. Used in conjunction with other ISS-provided tools, TReK provides the ability to integrate payloads with the operational ground system early in the lifecycle. This reduces the potential for operational problems and provides "cradle-to-grave" end-to-end operations. TReK contains user guides and self-paced tutorials along with training applications to allow the user to become familiar with the system.

Mercury: An Example of Effective Software Reuse for Metadata Management, Data Discovery and Access

DOE Office of Scientific and Technical Information (OSTI.GOV)

Devarakonda, Ranjeet

2008-01-01

Mercury is a federated metadata harvesting, data discovery and access tool based on both open source packages and custom developed software. Though originally developed for NASA, the Mercury development consortium now includes funding from NASA, USGS, and DOE. Mercury supports the reuse of metadata by enabling searching across a range of metadata specification and standards including XML, Z39.50, FGDC, Dublin-Core, Darwin-Core, EML, and ISO-19115. Mercury provides a single portal to information contained in distributed data management systems. It collects metadata and key data from contributing project servers distributed around the world and builds a centralized index. The Mercury search interfacesmore » then allow the users to perform simple, fielded, spatial and temporal searches across these metadata sources. One of the major goals of the recent redesign of Mercury was to improve the software reusability across the 12 projects which currently fund the continuing development of Mercury. These projects span a range of land, atmosphere, and ocean ecological communities and have a number of common needs for metadata searches, but they also have a number of needs specific to one or a few projects. To balance these common and project-specific needs, Mercury's architecture has three major reusable components; a harvester engine, an indexing system and a user interface component. The harvester engine is responsible for harvesting metadata records from various distributed servers around the USA and around the world. The harvester software was packaged in such a way that all the Mercury projects will use the same harvester scripts but each project will be driven by a set of project specific configuration files. The harvested files are structured metadata records that are indexed against the search library API consistently, so that it can render various search capabilities such as simple, fielded, spatial and temporal. This backend component is supported by a very flexible, easy to use Graphical User Interface which is driven by cascading style sheets, which make it even simpler for reusable design implementation. The new Mercury system is based on a Service Oriented Architecture and effectively reuses components for various services such as Thesaurus Service, Gazetteer Web Service and UDDI Directory Services. The software also provides various search services including: RSS, Geo-RSS, OpenSearch, Web Services and Portlets, integrated shopping cart to order datasets from various data centers (ORNL DAAC, NSIDC) and integrated visualization tools. Other features include: Filtering and dynamic sorting of search results, book- markable search results, save, retrieve, and modify search criteria.« less

Bearer channel control protocol for the dynamic VB5.2 interface in ATM access networks

NASA Astrophysics Data System (ADS)

Fragoulopoulos, Stratos K.; Mavrommatis, K. I.; Venieris, Iakovos S.

1996-12-01

In the multi-vendor systems, a customer connected to an Access network (AN) must be capable of selecting a specific Service Node (SN) according to the services the SN provides. The multiplicity of technologically varying AN calls for the definition of a standard reference point between the AN and the SN widely known as the VB interface. Two versions are currently offered. The VB5.1 is simpler to implement but is not as flexible as the VB5.2, which supports switched connections. The VB5.2 functionality is closely coupled to the Broadband Bearer Channel Connection Protocol (B-BCCP). The B-BCCP is used for conveying the necessary information for dynamic resource allocation, traffic policing and routing in the AN as well as for information exchange concerning the status of the AN before a new call is established by the SN. By relying on such a protocol for the exchange of information instead of intercepting and interpreting signalling messages in the AN, the architecture of the AN is simplified because the functionality related to processing is not duplicated. In this paper a prominent B- BCCP candidate is defined, called the Service node Access network Interaction Protocol.

Using EMBL-EBI services via Web interface and programmatically via Web Services

PubMed Central

Lopez, Rodrigo; Cowley, Andrew; Li, Weizhong; McWilliam, Hamish

2015-01-01

The European Bioinformatics Institute (EMBL-EBI) provides access to a wide range of databases and analysis tools that are of key importance in bioinformatics. As well as providing Web interfaces to these resources, Web Services are available using SOAP and REST protocols that enable programmatic access to our resources and allow their integration into other applications and analytical workflows. This unit describes the various options available to a typical researcher or bioinformatician who wishes to use our resources via Web interface or programmatically via a range of programming languages. PMID:25501941

The tsunami service bus, an integration platform for heterogeneous sensor systems

NASA Astrophysics Data System (ADS)

Haener, R.; Waechter, J.; Kriegel, U.; Fleischer, J.; Mueller, S.

2009-04-01

1. INTRODUCTION Early warning systems are long living and evolving: New sensor-systems and -types may be developed and deployed, sensors will be replaced or redeployed on other locations and the functionality of analyzing software will be improved. To ensure a continuous operability of those systems their architecture must be evolution-enabled. From a computer science point of view an evolution-enabled architecture must fulfill following criteria: • Encapsulation of and functionality on data in standardized services. Access to proprietary sensor data is only possible via these services. • Loose coupling of system constituents which easily can be achieved by implementing standardized interfaces. • Location transparency of services what means that services can be provided everywhere. • Separation of concerns that means breaking a system into distinct features which overlap in functionality as little as possible. A Service Oriented Architecture (SOA) as e. g. realized in the German Indonesian Tsunami Early Warning System (GITEWS) and the advantages of functional integration on the basis of services described below adopt these criteria best. 2. SENSOR INTEGRATION Integration of data from (distributed) data sources is just a standard task in computer science. From few well known solution patterns, taking into account performance and security requirements of early warning systems only functional integration should be considered. Precondition for this is that systems are realized compliant to SOA patterns. Functionality is realized in form of dedicated components communicating via a service infrastructure. These components provide their functionality in form of services via standardized and published interfaces which could be used to access data maintained in - and functionality provided by dedicated components. Functional integration replaces the tight coupling at data level by a dependency on loosely coupled services. If the interfaces of the service providing components remain unchanged, components can be maintained and evolved independently on each other and service functionality as a whole can be reused. In GITEWS the functional integration pattern was adopted by applying the principles of an Enterprise Service Bus (ESB) as a backbone. Four services provided by the so called Tsunami Service Bus (TSB) which are essential for early warning systems are realized compliant to services specified within the Sensor Web Enablement (SWE) initiative of the Open Geospatial Consortium (OGC). 3. ARCHITECTURE The integration platform was developed to access proprietary, heterogeneous sensor data and to provide them in a uniform manner for further use. Its core, the TSB provides both a messaging-backbone and -interfaces on the basis of a Java Messaging Service (JMS). The logical architecture of GITEWS consists of four independent layers: • A resource layer where physical or virtual sensors as well as data or model storages provide relevant measurement-, event- and analysis-data: Utilizable for the TSB are any kind of data. In addition to sensors databases, model data and processing applications are adopted. SWE specifies encoding both to access and to describe these data in a comprehensive way: 1. Sensor Model Language (SensorML): Standardized description of sensors and sensor data 2. Observations and Measurements (O&M): Model and encoding of sensor measurements • A service layer to collect and conduct data from heterogeneous and proprietary resources and provide them via standardized interfaces: The TSB enables interaction with sensors via the following services: 1. Sensor Observation Service (SOS): Standardized access to sensor data 2. Sensor Planning Service (SPS): Controlling of sensors and sensor networks 3. Sensor Alert Service (SAS): Active sending of data if defined events occur 4. Web Notification Service (WNS): Conduction of asynchronous dialogues between services • An orchestration layer where atomic services are composed and arranged to high level processes like a decision support process: One of the outstanding features of service-oriented architectures is the possibility to compose new services from existing ones, which can be done programmatically or via declaration (workflow or process design). This allows e. g. the definition of new warning processes which could be adapted easily to new requirements. • An access layer which may contain graphical user interfaces for decision support, monitoring- or visualization-systems: To for example visualize time series graphical user interfaces request sensor data simply via the SOS. 4.BENEFIT The integration platform is realized on top of well known and widely used open source software implementing industrial standards. New sensors could be added easily to the infrastructure. Client components don't need to be adjusted if new sensor-types or -individuals are added to the system, because they access the sensors via standardized services. With implementing SWE fully compatible to the OGC specification it is possible to establish the "detection" and integration of sensors via the Web. Thus realizing a system of systems that combines early warning system functionality at different levels of detail (distant early warning systems, monitoring systems and any sensor system) is feasible.

Orbital Spacecraft Consumables Resupply System (OSCRS): Monopropellant application to space station and OMV automatic refueling impacts of an ELV launch, volume 4

NASA Technical Reports Server (NTRS)

1987-01-01

The use of orbital spacecraft consumables resupply system (OSCRS) at the Space Station is investigated, its use with the orbital maneuvering vehicle, and launch of the OSCRS on an expendable launch vehicles. A system requirements evaluation was performed initially to identify any unique requirements that would impact the design of OSCRS when used at the Space Station. Space Station documents were reviewed to establish requirements and to identify interfaces between the OSCRS, Shuttle, and Space Station, especially the Servicing Facility. The interfaces between OSCRS and the Shuttle consists of an avionics interface for command and control and a structural interface for launch support and for grappling with the Shuttle Remote Manipulator System. For use of the OSCRS at the Space Station, three configurations were evaluated using the results of the interface definition to increase the efficiency of OSCRS and to decrease the launch weight by Station-basing specific OSCRS subsystems. A modular OSCRS was developed in which the major subsystems were Station-based where possible. The configuration of an OSCRS was defined for transport of water to the Space Station.

Development of XML Schema for Broadband Digital Seismograms and Data Center Portal

NASA Astrophysics Data System (ADS)

Takeuchi, N.; Tsuboi, S.; Ishihara, Y.; Nagao, H.; Yamagishi, Y.; Watanabe, T.; Yanaka, H.; Yamaji, H.

2008-12-01

There are a number of data centers around the globe, where the digital broadband seismograms are opened to researchers. Those centers use their own user interfaces and there are no standard to access and retrieve seismograms from different data centers using unified interface. One of the emergent technologies to realize unified user interface for different data centers is the concept of WebService and WebService portal. Here we have developed a prototype of data center portal for digital broadband seismograms. This WebService portal uses WSDL (Web Services Description Language) to accommodate differences among the different data centers. By using the WSDL, alteration and addition of data center user interfaces can be easily managed. This portal, called NINJA Portal, assumes three WebServices: (1) database Query service, (2) Seismic event data request service, and (3) Seismic continuous data request service. Current system supports both station search of database Query service and seismic continuous data request service. Data centers supported by this NINJA portal will be OHP data center in ERI and Pacific21 data center in IFREE/JAMSTEC in the beginning. We have developed metadata standard for seismological data based on QuakeML for parametric data, which has been developed by ETH Zurich, and XML-SEED for waveform data, which was developed by IFREE/JAMSTEC. The prototype of NINJA portal is now released through IFREE web page (http://www.jamstec.go.jp/pacific21/).

Integrating Grid Services into the Cray XT4 Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

NERSC; Cholia, Shreyas; Lin, Hwa-Chun Wendy

2009-05-01

The 38640 core Cray XT4"Franklin" system at the National Energy Research Scientific Computing Center (NERSC) is a massively parallel resource available to Department of Energy researchers that also provides on-demand grid computing to the Open Science Grid. The integration of grid services on Franklin presented various challenges, including fundamental differences between the interactive and compute nodes, a stripped down compute-node operating system without dynamic library support, a shared-root environment and idiosyncratic application launching. Inour work, we describe how we resolved these challenges on a running, general-purpose production system to provide on-demand compute, storage, accounting and monitoring services through generic gridmore » interfaces that mask the underlying system-specific details for the end user.« less

MyOcean Central Information System - Achievements and Perspectives

NASA Astrophysics Data System (ADS)

Claverie, Vincent; Loubrieu, Thomas; Jolibois, Tony; de Dianous, Rémi; Blower, Jon; Romero, Laia; Griffiths, Guy

2013-04-01

Since 2009, MyOcean (http://www.myocean.eu) is providing an operational service, for forecasts, analysis and expertise on ocean currents, temperature, salinity, sea level, primary ecosystems and ice coverage. The production of observation and forecasting data is done by 42 Production Units (PU). Product download and visualisation are hosted by 25 Dissemination Units (DU). All these products and associated services are gathered in a single catalogue hiding the intricate distributed organization of PUs and DUs. Besides applying INSPIRE directive and OGC recommendations, MyOcean overcomes technical choices and challenges. This presentation focuses on 3 specific issues met by MyOcean and relevant for many Spatial Data Infrastructures: user's transaction accounting, large volume download and stream line the catalogue maintenance. Transaction Accounting: Set up powerful means to get detailed knowledge of system usage in order to subsequently improve the products (ocean observations, analysis and forecast dataset) and services (view, download) offer. This subject drives the following ones: Central authentication management for the distributed web services implementations: add-on to THREDDS Data Server for WMS and NETCDF sub-setting service, specific FTP. Share user management with co-funding projects. In addition to MyOcean, alternate projects also need consolidated information about the use of the cofunded products. Provide a central facility for the user management. This central facility provides users' rights to geographically distributed services and gathers transaction accounting history from these distributed services. Propose a user-friendly web interface to download large volume of data (several GigaBytes) as robust as basic FTP but intuitive and file/directory independent. This should rely on a web service drafting the INSPIRE to-be specification and OGC recommendations for download taking into account that FTP server is not enough friendly (need to know filenames, directories) and Web-page not allowing downloading several files. Streamline the maintenance of the central catalogue. The major update for MyOcean v3 (April 2013) is the usage of Geonetwork for catalogue management. This improves the system at different levels : The editing interface is more user-friendly and the catalogue updates are managed in a workflow. This workflow allows higher flexibility for minor updates without giving up the high level qualification requirements for the catalogue content. The distributed web services (download, view) are automatically harvested from the THREDDS Data Server. Thus the manual editing on the catalogue is reduced, the associated typos are avoided and the quality of information is finally improved.

BioCatalogue: a universal catalogue of web services for the life sciences

PubMed Central

Bhagat, Jiten; Tanoh, Franck; Nzuobontane, Eric; Laurent, Thomas; Orlowski, Jerzy; Roos, Marco; Wolstencroft, Katy; Aleksejevs, Sergejs; Stevens, Robert; Pettifer, Steve; Lopez, Rodrigo; Goble, Carole A.

2010-01-01

The use of Web Services to enable programmatic access to on-line bioinformatics is becoming increasingly important in the Life Sciences. However, their number, distribution and the variable quality of their documentation can make their discovery and subsequent use difficult. A Web Services registry with information on available services will help to bring together service providers and their users. The BioCatalogue (http://www.biocatalogue.org/) provides a common interface for registering, browsing and annotating Web Services to the Life Science community. Services in the BioCatalogue can be described and searched in multiple ways based upon their technical types, bioinformatics categories, user tags, service providers or data inputs and outputs. They are also subject to constant monitoring, allowing the identification of service problems and changes and the filtering-out of unavailable or unreliable resources. The system is accessible via a human-readable ‘Web 2.0’-style interface and a programmatic Web Service interface. The BioCatalogue follows a community approach in which all services can be registered, browsed and incrementally documented with annotations by any member of the scientific community. PMID:20484378

BioCatalogue: a universal catalogue of web services for the life sciences.

PubMed

Bhagat, Jiten; Tanoh, Franck; Nzuobontane, Eric; Laurent, Thomas; Orlowski, Jerzy; Roos, Marco; Wolstencroft, Katy; Aleksejevs, Sergejs; Stevens, Robert; Pettifer, Steve; Lopez, Rodrigo; Goble, Carole A

2010-07-01

The use of Web Services to enable programmatic access to on-line bioinformatics is becoming increasingly important in the Life Sciences. However, their number, distribution and the variable quality of their documentation can make their discovery and subsequent use difficult. A Web Services registry with information on available services will help to bring together service providers and their users. The BioCatalogue (http://www.biocatalogue.org/) provides a common interface for registering, browsing and annotating Web Services to the Life Science community. Services in the BioCatalogue can be described and searched in multiple ways based upon their technical types, bioinformatics categories, user tags, service providers or data inputs and outputs. They are also subject to constant monitoring, allowing the identification of service problems and changes and the filtering-out of unavailable or unreliable resources. The system is accessible via a human-readable 'Web 2.0'-style interface and a programmatic Web Service interface. The BioCatalogue follows a community approach in which all services can be registered, browsed and incrementally documented with annotations by any member of the scientific community.

AccessMRS: integrating OpenMRS with smart forms on Android.

PubMed

Fazen, Louis E; Chemwolo, Benjamin T; Songok, Julia J; Ruhl, Laura J; Kipkoech, Carolyne; Green, James M; Ikemeri, Justus E; Christoffersen-Deb, Astrid

2013-01-01

We present a new open-source Android application, AccessMRS, for interfacing with an electronic medical record system (OpenMRS) and loading 'Smart Forms' on a mobile device. AccessMRS functions as a patient-centered interface for viewing OpenMRS data; managing patient information in reminders, task lists, and previous encounters; and launching patient-specific 'Smart Forms' for electronic data collection and dissemination of health information. We present AccessMRS in the context of related software applications we developed to serve Community Health Workers, including AccessInfo, AccessAdmin, AccessMaps, and AccessForms. The specific features and design of AccessMRS are detailed in relationship to the requirements that drove development: the workflows of the Kenyan Ministry of Health Community Health Volunteers (CHVs) supported by the AMPATH Primary Health Care Program. Specifically, AccessMRS was designed to improve the quality of community-based Maternal and Child Health services delivered by CHVs in Kosirai Division. AccessMRS is currently in use by more than 80 CHVs in Kenya and undergoing formal assessment of acceptability, effectiveness, and cost.

Advanced Query and Data Mining Capabilities for MaROS

NASA Technical Reports Server (NTRS)

Wang, Paul; Wallick, Michael N.; Allard, Daniel A.; Gladden, Roy E.; Hy, Franklin H.

2013-01-01

The Mars Relay Operational Service (MaROS) comprises a number of tools to coordinate, plan, and visualize various aspects of the Mars Relay network. These levels include a Web-based user interface, a back-end "ReSTlet" built in Java, and databases that store the data as it is received from the network. As part of MaROS, the innovators have developed and implemented a feature set that operates on several levels of the software architecture. This new feature is an advanced querying capability through either the Web-based user interface, or through a back-end REST interface to access all of the data gathered from the network. This software is not meant to replace the REST interface, but to augment and expand the range of available data. The current REST interface provides specific data that is used by the MaROS Web application to display and visualize the information; however, the returned information from the REST interface has typically been pre-processed to return only a subset of the entire information within the repository, particularly only the information that is of interest to the GUI (graphical user interface). The new, advanced query and data mining capabilities allow users to retrieve the raw data and/or to perform their own data processing. The query language used to access the repository is a restricted subset of the structured query language (SQL) that can be built safely from the Web user interface, or entered as freeform SQL by a user. The results are returned in a CSV (Comma Separated Values) format for easy exporting to third party tools and applications that can be used for data mining or user-defined visualization and interpretation. This is the first time that a service is capable of providing access to all cross-project relay data from a single Web resource. Because MaROS contains the data for a variety of missions from the Mars network, which span both NASA and ESA, the software also establishes an access control list (ACL) on each data record in the database repository to enforce user access permissions through a multilayered approach.

47 CFR 76.1903 - Interfaces.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Encoding Rules § 76.1903 Interfaces. A covered entity shall not attach or embed data or information with commercial audiovisual content, or otherwise apply to, associate with, or...

A Reference Implementation of the OGC CSW EO Standard for the ESA HMA-T project

NASA Astrophysics Data System (ADS)

Bigagli, Lorenzo; Boldrini, Enrico; Papeschi, Fabrizio; Vitale, Fabrizio

2010-05-01

This work was developed in the context of the ESA Heterogeneous Missions Accessibility (HMA) project, whose main objective is to involve the stakeholders, namely National space agencies, satellite or mission owners and operators, in an harmonization and standardization process of their ground segment services and related interfaces. Among HMA objectives was the specification, conformance testing, and experimentation of two Extension Packages (EPs) of the ebRIM Application Profile (AP) of the OGC Catalog Service for the Web (CSW) specification: the Earth Observation Products (EO) EP (OGC 06-131) and the Cataloguing of ISO Metadata (CIM) EP (OGC 07-038). Our contributions have included the development and deployment of Reference Implementations (RIs) for both the above specifications, and their integration with the ESA Service Support Environment (SSE). The RIs are based on the GI-cat framework, an implementation of a distributed catalog service, able to query disparate Earth and Space Science data sources (e.g. OGC Web Services, Unidata THREDDS) and to expose several standard interfaces for data discovery (e.g. OGC CSW ISO AP). Following our initial planning, the GI-cat framework has been extended in order to expose the CSW.ebRIM-CIM and CSW.ebRIM-EO interfaces, and to distribute queries to CSW.ebRIM-CIM and CSW.ebRIM-EO data sources. We expected that a mapping strategy would suffice for accommodating CIM, but this proved to be unpractical during implementation. Hence, a model extension strategy was eventually implemented for both the CIM and EO EPs, and the GI-cat federal model was enhanced in order to support the underlying ebRIM AP. This work has provided us with new insights into the different data models for geospatial data, and the technologies for their implementation. The extension is used by suitable CIM and EO profilers (front-end mediator components) and accessors (back-end mediator components), that relate ISO 19115 concepts to EO and CIM ones. Moreover, a mapping to GI-cat federal model was developed for each EP (quite limited for EO; complete for CIM), in order to enable the discovery of resources through any of GI-cat profilers. The query manager was also improved. GI-cat-EO and -CIM installation packages were made available for distribution, and two RI instances were deployed on the Amazon EC2 facility (plus an ad-hoc instance returning incorrect control data). Integration activities of the EO RI with the ESA SSE Portal for Earth Observation Products were also successfully carried on. During our work, we have contributed feedback and comments to the CIM and EO EP specification working groups. Our contributions resulted in version 0.2.5 of the EO EP, recently approved as an OGC standard, and were useful to consolidate version 0.1.11 of the CIM EP (still being developed).

DSMS Operations Concept

NASA Technical Reports Server (NTRS)

Spradlin, G.

2000-01-01

The concept provides an overview of operational roles and responsibilities in a service system environment. It describes changed and new interfaces between the customers and the service system, and variations on these interfaces as a function of the level of support required by the customer.

Interim Service ISDN Satellite (ISIS) hardware experiment development for advanced ISDN satellite designs and experiments

NASA Technical Reports Server (NTRS)

Pepin, Gerard R.

1992-01-01

The Interim Service Integrated Service Digital Network (ISDN) Satellite (ISIS) Hardware Experiment Development for Advanced Satellite Designs describes the development of the ISDN Satellite Terminal Adapter (ISTA) capable of translating ISDN protocol traffic into Time Division Multiple Access (TDMA) signals for use by a communications satellite. The ISTA connects the Type 1 Network Termination (NT1) via the U-interface on the line termination side of the CPE to the RS-499 interface for satellite uplink. The same ISTA converts in the opposite direction the RS-499 to U-interface data with a simple switch setting.

Using EMBL-EBI Services via Web Interface and Programmatically via Web Services.

PubMed

Lopez, Rodrigo; Cowley, Andrew; Li, Weizhong; McWilliam, Hamish

2014-12-12

The European Bioinformatics Institute (EMBL-EBI) provides access to a wide range of databases and analysis tools that are of key importance in bioinformatics. As well as providing Web interfaces to these resources, Web Services are available using SOAP and REST protocols that enable programmatic access to our resources and allow their integration into other applications and analytical workflows. This unit describes the various options available to a typical researcher or bioinformatician who wishes to use our resources via Web interface or programmatically via a range of programming languages. Copyright © 2014 John Wiley & Sons, Inc.

CAD/CAE Integration Enhanced by New CAD Services Standard

NASA Technical Reports Server (NTRS)

Claus, Russell W.

2002-01-01

A Government-industry team led by the NASA Glenn Research Center has developed a computer interface standard for accessing data from computer-aided design (CAD) systems. The Object Management Group, an international computer standards organization, has adopted this CAD services standard. The new standard allows software (e.g., computer-aided engineering (CAE) and computer-aided manufacturing software to access multiple CAD systems through one programming interface. The interface is built on top of a distributed computing system called the Common Object Request Broker Architecture (CORBA). CORBA allows the CAD services software to operate in a distributed, heterogeneous computing environment.

Interim Service ISDN Satellite (ISIS) hardware experiment design for advanced ISDN satellite design and experiments

NASA Technical Reports Server (NTRS)

Pepin, Gerard R.

1992-01-01

The Interim Service Integrated Services Digital Network (ISDN) Satellite (ISIS) Hardware Experiment Design for Advanced Satellite Designs describes the design of the ISDN Satellite Terminal Adapter (ISTA) capable of translating ISDN protocol traffic into time division multiple access (TDMA) signals for use by a communications satellite. The ISTA connects the Type 1 Network Termination (NT1) via the U-interface on the line termination side of the CPE to the V.35 interface for satellite uplink. The same ISTA converts in the opposite direction the V.35 to U-interface data with a simple switch setting.

PUS Services Software Building Block Automatic Generation for Space Missions

NASA Astrophysics Data System (ADS)

Candia, S.; Sgaramella, F.; Mele, G.

2008-08-01

The Packet Utilization Standard (PUS) has been specified by the European Committee for Space Standardization (ECSS) and issued as ECSS-E-70-41A to define the application-level interface between Ground Segments and Space Segments. The ECSS-E- 70-41A complements the ECSS-E-50 and the Consultative Committee for Space Data Systems (CCSDS) recommendations for packet telemetry and telecommand. The ECSS-E-70-41A characterizes the identified PUS Services from a functional point of view and the ECSS-E-70-31 standard specifies the rules for their mission-specific tailoring. The current on-board software design for a space mission implies the production of several PUS terminals, each providing a specific tailoring of the PUS services. The associated on-board software building blocks are developed independently, leading to very different design choices and implementations even when the mission tailoring requires very similar services (from the Ground operative perspective). In this scenario, the automatic production of the PUS services building blocks for a mission would be a way to optimize the overall mission economy and improve the robusteness and reliability of the on-board software and of the Ground-Space interactions. This paper presents the Space Software Italia (SSI) activities for the development of an integrated environment to support: the PUS services tailoring activity for a specific mission. the mission-specific PUS services configuration. the generation the UML model of the software building block implementing the mission-specific PUS services and the related source code, support documentation (software requirements, software architecture, test plans/procedures, operational manuals), and the TM/TC database. The paper deals with: (a) the project objectives, (b) the tailoring, configuration, and generation process, (c) the description of the environments supporting the process phases, (d) the characterization of the meta-model used for the generation, (e) the characterization of the reference avionics architecture and of the reference on- board software high-level architecture.

Manned remote work station development article. Volume 3: Development test plan. Appendix A: Manufacturing requirements/schedule

NASA Technical Reports Server (NTRS)

1979-01-01

The tests and procedures for the manned remote work station (MRWS) open cherry picker (OCP) development test article (DTA) are described to validate systems requirements and performance specifications. A development test program is outlined to evaluate key design issues and man/machine interfaces when the MRWS OCP is used in a shuttle support role of satellite servicing and in orbit construction of large structures.

Job submission and management through web services: the experience with the CREAM service

NASA Astrophysics Data System (ADS)

Aiftimiei, C.; Andreetto, P.; Bertocco, S.; Fina, S. D.; Ronco, S. D.; Dorigo, A.; Gianelle, A.; Marzolla, M.; Mazzucato, M.; Sgaravatto, M.; Verlato, M.; Zangrando, L.; Corvo, M.; Miccio, V.; Sciaba, A.; Cesini, D.; Dongiovanni, D.; Grandi, C.

2008-07-01

Modern Grid middleware is built around components providing basic functionality, such as data storage, authentication, security, job management, resource monitoring and reservation. In this paper we describe the Computing Resource Execution and Management (CREAM) service. CREAM provides a Web service-based job execution and management capability for Grid systems; in particular, it is being used within the gLite middleware. CREAM exposes a Web service interface allowing conforming clients to submit and manage computational jobs to a Local Resource Management System. We developed a special component, called ICE (Interface to CREAM Environment) to integrate CREAM in gLite. ICE transfers job submissions and cancellations from the Workload Management System, allowing users to manage CREAM jobs from the gLite User Interface. This paper describes some recent studies aimed at assessing the performance and reliability of CREAM and ICE; those tests have been performed as part of the acceptance tests for integration of CREAM and ICE in gLite. We also discuss recent work towards enhancing CREAM with a BES and JSDL compliant interface.

The SHIP: A SIP to HTTP Interaction Protocol

NASA Astrophysics Data System (ADS)

Zeiß, Joachim; Gabner, Rene; Bessler, Sandford; Happenhofer, Marco

IMS is capable of providing a wide range of services. As a result, terminal software becomes more and more complex to deliver network intelligence to user applications. Currently mobile terminal software needs to be permanently updated so that the latest network services and functionality can be delivered to the user. In the Internet, browser based user interfaces assure that an interface is made available to the user which offers the latest services in the net immediately. Our approach combines the benefits of the Session Initiation Protocol (SIP) and those of the HTTP protocol to bring the same type of user interfacing to IMS. SIP (IMS) realizes authentication, session management, charging and Quality of Service (QoS), HTTP provides access to Internet services and allows the user interface of an application to run on a mobile terminal while processing and orchestration is done on the server. A SHIP enabled IMS client only needs to handle data transport and session management via SIP, HTTP and RTP and render streaming media, HTML and Javascript. SHIP allows new kinds of applications, which combine audio, video and data within a single multimedia session.

Formal specification of human-computer interfaces

NASA Technical Reports Server (NTRS)

Auernheimer, Brent

1990-01-01

A high-level formal specification of a human computer interface is described. Previous work is reviewed and the ASLAN specification language is described. Top-level specifications written in ASLAN for a library and a multiwindow interface are discussed.

Caching strategies for improving performance of web-based Geographic applications

NASA Astrophysics Data System (ADS)

Liu, M.; Brodzik, M.; Collins, J. A.; Lewis, S.; Oldenburg, J.

2012-12-01

The NASA Operation IceBridge mission collects airborne remote sensing measurements to bridge the gap between NASA's Ice, Cloud and Land Elevation Satellite (ICESat) mission and the upcoming ICESat-2 mission. The IceBridge Data Portal from the National Snow and Ice Data Center provides an intuitive web interface for accessing IceBridge mission observations and measurements. Scientists and users usually do not have knowledge about the individual campaigns but are interested in data collected in a specific place. We have developed a high-performance map interface to allow users to quickly zoom to an area of interest and see any Operation IceBridge overflights. The map interface consists of two layers: the user can pan and zoom on the base map layer; the flight line layer that overlays the base layer provides all the campaign missions that intersect with the current map view. The user can click on the flight campaigns and download the data as needed. The OpenGIS® Web Map Service Interface Standard (WMS) provides a simple HTTP interface for requesting geo-registered map images from one or more distributed geospatial databases. Web Feature Service (WFS) provides an interface allowing requests for geographical features across the web using platform-independent calls. OpenLayers provides vector support (points, polylines and polygons) to build a WMS/WFS client for displaying both layers on the screen. Map Server, an open source development environment for building spatially enabled internet applications, is serving the WMS and WFS spatial data to OpenLayers. Early releases of the portal displayed unacceptably poor load time performance for flight lines and the base map tiles. This issue was caused by long response times from the map server in generating all map tiles and flight line vectors. We resolved the issue by implementing various caching strategies on top of the WMS and WFS services, including the use of Squid (www.squid-cache.org) to cache frequently-used content. Our presentation includes the architectural design of the application, and how we use OpenLayers, WMS and WFS with Squid to build a responsive web application capable of efficiently displaying geospatial data to allow the user to quickly interact with the displayed information. We describe the design, implementation and performance improvement of our caching strategies, and the tools and techniques developed to assist our data caching strategies.

Human factors issues in telerobotic systems for Space Station Freedom servicing

NASA Technical Reports Server (NTRS)

Malone, Thomas B.; Permenter, Kathryn E.

1990-01-01

Requirements for Space Station Freedom servicing are described and the state-of-the-art for telerobotic system on-orbit servicing of spacecraft is defined. The projected requirements for the Space Station Flight Telerobotic Servicer (FTS) are identified. Finally, the human factors issues in telerobotic servicing are discussed. The human factors issues are basically three: the definition of the role of the human versus automation in system control; the identification of operator-device interface design requirements; and the requirements for development of an operator-machine interface simulation capability.

Municipal biosolid applications: Improving ecosystem services across urban, agricultural, and wildlife interfaces in Austin, Texas

USDA-ARS?s Scientific Manuscript database

Our project encompasses emerging contaminants, ecosystem services, and urban-agriculture-wildlife interfaces. This seminal research collaboration between USDA-ARS Grassland, Soil, and Water Research Laboratory, The City of Austin Water Utility, and Texas Parks and Wildlife Environmental Contaminant...

Serving Satellite Remote Sensing Data to User Community through the OGC Interoperability Protocols

NASA Astrophysics Data System (ADS)

di, L.; Yang, W.; Bai, Y.

2005-12-01

Remote sensing is one of the major methods for collecting geospatial data. Hugh amount of remote sensing data has been collected by space agencies and private companies around the world. For example, NASA's Earth Observing System (EOS) is generating more than 3 Tb of remote sensing data per day. The data collected by EOS are processed, distributed, archived, and managed by the EOS Data and Information System (EOSDIS). Currently, EOSDIS is managing several petabytes of data. All of those data are not only valuable for global change research, but also useful for local and regional application and decision makings. How to make the data easily accessible to and usable by the user community is one of key issues for realizing the full potential of these valuable datasets. In the past several years, the Open Geospatial Consortium (OGC) has developed several interoperability protocols aiming at making geospatial data easily accessible to and usable by the user community through Internet. The protocols particularly relevant to the discovery, access, and integration of multi-source satellite remote sensing data are the Catalog Service for Web (CS/W) and Web Coverage Services (WCS) Specifications. The OGC CS/W specifies the interfaces, HTTP protocol bindings, and a framework for defining application profiles required to publish and access digital catalogues of metadata for geographic data, services, and related resource information. The OGC WCS specification defines the interfaces between web-based clients and servers for accessing on-line multi-dimensional, multi-temporal geospatial coverage in an interoperable way. Based on definitions by OGC and ISO 19123, coverage data include all remote sensing images as well as gridded model outputs. The Laboratory for Advanced Information Technology and Standards (LAITS), George Mason University, has been working on developing and implementing OGC specifications for better serving NASA Earth science data to the user community for many years. We have developed the NWGISS software package that implements multiple OGC specifications, including OGC WMS, WCS, CS/W, and WFS. As a part of NASA REASON GeoBrain project, the NWGISS WCS and CS/W servers have been extended to provide operational access to NASA EOS data at data pools through OGC protocols and to make both services chainable in the web-service chaining. The extensions in the WCS server include the implementation of WCS 1.0.0 and WCS 1.0.2, and the development of WSDL description of the WCS services. In order to find the on-line EOS data resources, the CS/W server is extended at the backend to search metadata in NASA ECHO. This presentation reports those extensions and discuss lessons-learned on the implementation. It also discusses the advantage, disadvantages, and future improvement of OGC specifications, particularly the WCS.

MaROS Strategic Relay Planning and Coordination Interfaces

NASA Technical Reports Server (NTRS)

Allard, Daniel A.

2010-01-01

The Mars Relay Operations Service (MaROS) is designed to provide planning and analysis tools in support of ongoing Mars Network relay operations. Strategic relay planning requires coordination between lander and orbiter mission ground data system (GDS) teams to schedule and execute relay communications passes. MaROS centralizes this process, correlating all data relevant to relay coordination to provide a cohesive picture of the relay state. Service users interact with the system through thin-layer command line and web user interface client applications. Users provide and utilize data such as lander view periods of orbiters, Deep Space Network (DSN) antenna tracks, and reports of relay pass performance. Users upload and download relevant relay data via formally defined and documented file structures including some described in Extensible Markup Language (XML). Clients interface with the system via an http-based Representational State Transfer (ReST) pattern using Javascript Object Notation (JSON) formats. This paper will provide a general overview of the service architecture and detail the software interfaces and considerations for interface design.

mREST Interface Specification

NASA Technical Reports Server (NTRS)

McCartney, Patrick; MacLean, John

2012-01-01

mREST is an implementation of the REST architecture specific to the management and sharing of data in a system of logical elements. The purpose of this document is to clearly define the mREST interface protocol. The interface protocol covers all of the interaction between mREST clients and mREST servers. System-level requirements are not specifically addressed. In an mREST system, there are typically some backend interfaces between a Logical System Element (LSE) and the associated hardware/software system. For example, a network camera LSE would have a backend interface to the camera itself. These interfaces are specific to each type of LSE and are not covered in this document. There are also frontend interfaces that may exist in certain mREST manager applications. For example, an electronic procedure execution application may have a specialized interface for configuring the procedures. This interface would be application specific and outside of this document scope. mREST is intended to be a generic protocol which can be used in a wide variety of applications. A few scenarios are discussed to provide additional clarity but, in general, application-specific implementations of mREST are not specifically addressed. In short, this document is intended to provide all of the information necessary for an application developer to create mREST interface agents. This includes both mREST clients (mREST manager applications) and mREST servers (logical system elements, or LSEs).

User Interface Technology for Formal Specification Development

NASA Technical Reports Server (NTRS)

Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

1994-01-01

Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

Transportability, distributability and rehosting experience with a kernel operating system interface set

NASA Technical Reports Server (NTRS)

Blumberg, F. C.; Reedy, A.; Yodis, E.

1986-01-01

For the past two years, PRC has been transporting and installing a software engineering environment framework, the Automated Product control Environment (APCE), at a number of PRC and government sites on a variety of different hardware. The APCE was designed using a layered architecture which is based on a standardized set of interfaces to host system services. This interface set called the APCE Interface Set (AIS), was designed to support many of the same goals as the Common Ada Programming Support Environment (APSE) Interface Set (CAIS). The APCE was developed to provide support for the full software lifecycle. Specific requirements of the APCE design included: automation of labor intensive administrative and logistical tasks: freedom for project team members to use existing tools: maximum transportability for APCE programs, interoperability of APCE database data, and distributability of both processes and data: and maximum performance on a wide variety of operating systems. A brief description is given of the APCE and AIS, a comparison of the AIS and CAIS both in terms of functionality and of philosophy and approach and a presentation of PRC's experience in rehosting AIS and transporting APCE programs and project data. Conclusions are drawn from this experience with respect to both the CAIS efforts and Space Station plans.

Using CREAM and CEMonitor for job submission and management in the gLite middleware

NASA Astrophysics Data System (ADS)

Aiftimiei, C.; Andreetto, P.; Bertocco, S.; Dalla Fina, S.; Dorigo, A.; Frizziero, E.; Gianelle, A.; Marzolla, M.; Mazzucato, M.; Mendez Lorenzo, P.; Miccio, V.; Sgaravatto, M.; Traldi, S.; Zangrando, L.

2010-04-01

In this paper we describe the use of CREAM and CEMonitor services for job submission and management within the gLite Grid middleware. Both CREAM and CEMonitor address one of the most fundamental operations of a Grid middleware, that is job submission and management. Specifically, CREAM is a job management service used for submitting, managing and monitoring computational jobs. CEMonitor is an event notification framework, which can be coupled with CREAM to provide the users with asynchronous job status change notifications. Both components have been integrated in the gLite Workload Management System by means of ICE (Interface to CREAM Environment). These software components have been released for production in the EGEE Grid infrastructure and, for what concerns the CEMonitor service, also in the OSG Grid. In this paper we report the current status of these services, the achieved results, and the issues that still have to be addressed.

Critical Software for Human Spaceflight

NASA Technical Reports Server (NTRS)

Preden, Antonio; Kaschner, Jens; Rettig, Felix; Rodriggs, Michael

2017-01-01

The NASA Orion vehicle that will fly to the moon in the next years is propelled along its mission by the European Service Module (ESM), developed by ESA and its prime contractor Airbus Defense and Space. This paper describes the development of the Propulsion Drive Electronics (PDE) Software that provides the interface between the propulsion hardware of the European Service Module with the Orion flight computers, and highlights the challenges that have been faced during the development. Particularly, the specific aspects relevant to Human Spaceflight in an international cooperation are presented, as the compliance to both European and US standards and the software criticality classification to the highest category A. An innovative aspect of the PDE SW is its Time- Triggered Ethernet interface with the Orion Flight Computers, which has never been flown so far on any European spacecraft. Finally the verification aspects are presented, applying the most exigent quality requirements defined in the European Cooperation for Space Standardization (ECSS) standards such as the structural coverage analysis of the object code and the recourse to an independent software verification and validation activity carried on in parallel by a different team.

General Aviation Data Framework

NASA Technical Reports Server (NTRS)

Blount, Elaine M.; Chung, Victoria I.

2006-01-01

The Flight Research Services Directorate at the NASA Langley Research Center (LaRC) provides development and operations services associated with three general aviation (GA) aircraft used for research experiments. The GA aircraft includes a Cessna 206X Stationair, a Lancair Colombia 300X, and a Cirrus SR22X. Since 2004, the GA Data Framework software was designed and implemented to gather data from a varying set of hardware and software sources as well as enable transfer of the data to other computers or devices. The key requirements for the GA Data Framework software include platform independence, the ability to reuse the framework for different projects without changing the framework code, graphics display capabilities, and the ability to vary the interfaces and their performance. Data received from the various devices is stored in shared memory. This paper concentrates on the object oriented software design patterns within the General Aviation Data Framework, and how they enable the construction of project specific software without changing the base classes. The issues of platform independence and multi-threading which enable interfaces to run at different frame rates are also discussed in this paper.

Mass storage system reference model, Version 4

NASA Technical Reports Server (NTRS)

Coleman, Sam (Editor); Miller, Steve (Editor)

1993-01-01

The high-level abstractions that underlie modern storage systems are identified. The information to generate the model was collected from major practitioners who have built and operated large storage facilities, and represents a distillation of the wisdom they have acquired over the years. The model provides a common terminology and set of concepts to allow existing systems to be examined and new systems to be discussed and built. It is intended that the model and the interfaces identified from it will allow and encourage vendors to develop mutually-compatible storage components that can be combined to form integrated storage systems and services. The reference model presents an abstract view of the concepts and organization of storage systems. From this abstraction will come the identification of the interfaces and modules that will be used in IEEE storage system standards. The model is not yet suitable as a standard; it does not contain implementation decisions, such as how abstract objects should be broken up into software modules or how software modules should be mapped to hosts; it does not give policy specifications, such as when files should be migrated; does not describe how the abstract objects should be used or connected; and does not refer to specific hardware components. In particular, it does not fully specify the interfaces.

The Infusion of Dust Model Model Outputs into Public Health Decision Making - an Examination of Differential Adoption of SOAP and Open Geospatial Consortium Service Products into Public Health Decision Support Systems

NASA Astrophysics Data System (ADS)

Benedict, K. K.

2008-12-01

Since 2004 the Earth Data Analysis Center, in collaboration with the researchers at the University of Arizona and George Mason University, with funding from NASA, has been developing a services oriented architecture (SOA) that acquires remote sensing, meteorological forecast, and observed ground level particulate data (EPA AirNow) from NASA, NOAA, and DataFed through a variety of standards-based service interfaces. These acquired data are used to initialize and set boundary conditions for the execution of the Dust Regional Atmospheric Model (DREAM) to generate daily 48-hour dust forecasts, which are then published via a combination of Open Geospatial Consortium (OGC) services (WMS and WCS), basic HTTP request-based services, and SOAP services. The goal of this work has been to develop services that can be integrated into existing public health decision support systems (DSS) to provide enhanced environmental data (i.e. ground surface particulate concentration estimates) for use in epidemiological analysis, public health warning systems, and syndromic surveillance systems. While the project has succeeded in deploying these products into the target systems, there has been differential adoption of the different service interface products, with the simple OGC and HTTP interfaces generating much greater interest by DSS developers and researchers than the more complex SOAP service interfaces. This paper reviews the SOA developed as part of this project and provides insights into how different service models may have a significant impact on the infusion of Earth science products into decision making processes and systems.

Framework for experimenting with QoS for multimedia services

NASA Astrophysics Data System (ADS)

Chen, Deming; Colwell, Regis; Gelman, Herschel; Chrysanthis, Panos K.; Mosse, Daniel

1996-03-01

It has been recognized that an effective support for multimedia applications must provide Quality of Service (QoS) guarantees. Current methods propose to provide such QoS guarantees through coordinated network resource reservations. In our approach, we extend this idea providing system-wide QoS guarantees that consider the data manipulation and transformations needed in the intermediate and end sites of the network. Given a user's QoS requirements, multisegment virtual channels are established with the necessary communication and computation resources reserved for the timely, synchronized, and reliable delivery of the different datatypes. Such data originate in several distributed data repositories, are transformed at intermediate service stations into suitable formats for transportation and presentation, and are delivered to a viewing unit. In this paper, we first review NETWORLD, an architecture that provides such QoS guarantees and an interface for the specification and negotiation of user-level QoS requirements. Our user interface supports both expert and non- expert modes. We then describe how to map user-level QoS requirements into low-level system parameters, leading into a contract between the application and the network. The mapping considers various characteristics of the architectures (such as the hardware and software available at each source, destination, or intermediate site) as well as cost constraints.

Graphic Interfaces and Online Information.

ERIC Educational Resources Information Center

Percival, J. Mark

1990-01-01

Discusses the growing importance of the use of Graphic User Interfaces (GUIs) with microcomputers and online services. Highlights include the development of graphics interfacing with microcomputers; CD-ROM databases; an evaluation of HyperCard as a potential interface to electronic mail and online commercial databases; and future possibilities.…

Web Services and Other Enhancements at the Northern California Earthquake Data Center

NASA Astrophysics Data System (ADS)

Neuhauser, D. S.; Zuzlewski, S.; Allen, R. M.

2012-12-01

The Northern California Earthquake Data Center (NCEDC) provides data archive and distribution services for seismological and geophysical data sets that encompass northern California. The NCEDC is enhancing its ability to deliver rapid information through Web Services. NCEDC Web Services use well-established web server and client protocols and REST software architecture to allow users to easily make queries using web browsers or simple program interfaces and to receive the requested data in real-time rather than through batch or email-based requests. Data are returned to the user in the appropriate format such as XML, RESP, or MiniSEED depending on the service, and are compatible with the equivalent IRIS DMC web services. The NCEDC is currently providing the following Web Services: (1) Station inventory and channel response information delivered in StationXML format, (2) Channel response information delivered in RESP format, (3) Time series availability delivered in text and XML formats, (4) Single channel and bulk data request delivered in MiniSEED format. The NCEDC is also developing a rich Earthquake Catalog Web Service to allow users to query earthquake catalogs based on selection parameters such as time, location or geographic region, magnitude, depth, azimuthal gap, and rms. It will return (in QuakeML format) user-specified results that can include simple earthquake parameters, as well as observations such as phase arrivals, codas, amplitudes, and computed parameters such as first motion mechanisms, moment tensors, and rupture length. The NCEDC will work with both IRIS and the International Federation of Digital Seismograph Networks (FDSN) to define a uniform set of web service specifications that can be implemented by multiple data centers to provide users with a common data interface across data centers. The NCEDC now hosts earthquake catalogs and waveforms from the US Department of Energy (DOE) Enhanced Geothermal Systems (EGS) monitoring networks. These data can be accessed through the above web services and through special NCEDC web pages.

SIMAP—the database of all-against-all protein sequence similarities and annotations with new interfaces and increased coverage

PubMed Central

Arnold, Roland; Goldenberg, Florian; Mewes, Hans-Werner; Rattei, Thomas

2014-01-01

The Similarity Matrix of Proteins (SIMAP, http://mips.gsf.de/simap/) database has been designed to massively accelerate computationally expensive protein sequence analysis tasks in bioinformatics. It provides pre-calculated sequence similarities interconnecting the entire known protein sequence universe, complemented by pre-calculated protein features and domains, similarity clusters and functional annotations. SIMAP covers all major public protein databases as well as many consistently re-annotated metagenomes from different repositories. As of September 2013, SIMAP contains >163 million proteins corresponding to ∼70 million non-redundant sequences. SIMAP uses the sensitive FASTA search heuristics, the Smith–Waterman alignment algorithm, the InterPro database of protein domain models and the BLAST2GO functional annotation algorithm. SIMAP assists biologists by facilitating the interactive exploration of the protein sequence universe. Web-Service and DAS interfaces allow connecting SIMAP with any other bioinformatic tool and resource. All-against-all protein sequence similarity matrices of project-specific protein collections are generated on request. Recent improvements allow SIMAP to cover the rapidly growing sequenced protein sequence universe. New Web-Service interfaces enhance the connectivity of SIMAP. Novel tools for interactive extraction of protein similarity networks have been added. Open access to SIMAP is provided through the web portal; the portal also contains instructions and links for software access and flat file downloads. PMID:24165881

Recommendations for a service framework to access astronomical archives

NASA Technical Reports Server (NTRS)

Travisano, J. J.; Pollizzi, J.

1992-01-01

There are a large number of astronomical archives and catalogs on-line for network access, with many different user interfaces and features. Some systems are moving towards distributed access, supplying users with client software for their home sites which connects to servers at the archive site. Many of the issues involved in defining a standard framework of services that archive/catalog suppliers can use to achieve a basic level of interoperability are described. Such a framework would simplify the development of client and server programs to access the wide variety of astronomical archive systems. The primary services that are supplied by current systems include: catalog browsing, dataset retrieval, name resolution, and data analysis. The following issues (and probably more) need to be considered in establishing a standard set of client/server interfaces and protocols: Archive Access - dataset retrieval, delivery, file formats, data browsing, analysis, etc.; Catalog Access - database management systems, query languages, data formats, synchronous/asynchronous mode of operation, etc.; Interoperability - transaction/message protocols, distributed processing mechanisms (DCE, ONC/SunRPC, etc), networking protocols, etc.; Security - user registration, authorization/authentication mechanisms, etc.; Service Directory - service registration, lookup, port/task mapping, parameters, etc.; Software - public vs proprietary, client/server software, standard interfaces to client/server functions, software distribution, operating system portability, data portability, etc. Several archive/catalog groups, notably the Astrophysics Data System (ADS), are already working in many of these areas. In the process of developing StarView, which is the user interface to the Space Telescope Data Archive and Distribution Service (ST-DADS), these issues and the work of others were analyzed. A framework of standard interfaces for accessing services on any archive system which would benefit archive user and supplier alike is proposed.

Event selection services in ATLAS

NASA Astrophysics Data System (ADS)

Cranshaw, J.; Cuhadar-Donszelmann, T.; Gallas, E.; Hrivnac, J.; Kenyon, M.; McGlone, H.; Malon, D.; Mambelli, M.; Nowak, M.; Viegas, F.; Vinek, E.; Zhang, Q.

2010-04-01

ATLAS has developed and deployed event-level selection services based upon event metadata records ("TAGS") and supporting file and database technology. These services allow physicists to extract events that satisfy their selection predicates from any stage of data processing and use them as input to later analyses. One component of these services is a web-based Event-Level Selection Service Interface (ELSSI). ELSSI supports event selection by integrating run-level metadata, luminosity-block-level metadata (e.g., detector status and quality information), and event-by-event information (e.g., triggers passed and physics content). The list of events that survive after some selection criterion is returned in a form that can be used directly as input to local or distributed analysis; indeed, it is possible to submit a skimming job directly from the ELSSI interface using grid proxy credential delegation. ELSSI allows physicists to explore ATLAS event metadata as a means to understand, qualitatively and quantitatively, the distributional characteristics of ATLAS data. In fact, the ELSSI service provides an easy interface to see the highest missing ET events or the events with the most leptons, to count how many events passed a given set of triggers, or to find events that failed a given trigger but nonetheless look relevant to an analysis based upon the results of offline reconstruction, and more. This work provides an overview of ATLAS event-level selection services, with an emphasis upon the interactive Event-Level Selection Service Interface.

Distributor- Retailer Interface in Pharmaceutical Supply Chain: Service Quality Measurement Scale.

PubMed

Mehralian, Gholamhossein; Babapour, Jafar; Peiravian, Farzad

2016-01-01

In the current competitive market, service quality management is the key to the survival and success of businesses. SERVQUAL is a popular service quality measurement scale (SQMS) that has served as a basis for subsequent research on service quality; it has been used for testing different aspects of service quality in a market. The purpose of our study is, therefore, to develop a service quality measurement scale (SQMS) for the distributor-retailer interface of Pharm supply chains (PSC) in Iran. A survey was performed to collect data from pharmacies located in Tehran. A valid and reliable questionnaire delivered to pharmacies, and 400 pharmacies were intended to participate in our survey. Confirmatory factor analysis (CFA) was used to develop an SQMS in this study. Sufficient sampling was undertaken to do CFA. Consistent with other service quality studies, this Res developed an SQMS with five dimensions and 20 items for PSC, and contributes to mangers to regularly measure service quality. This is an initial study to develop a framework for measuring service quality in Iranian PCS. The framework can be used effectively to achieve competitive advantage at the distributor-retailer interface.

Distributor– Retailer Interface in Pharmaceutical Supply Chain: Service Quality Measurement Scale

PubMed Central

Mehralian, Gholamhossein; Babapour, Jafar; peiravian, farzad

2016-01-01

In the current competitive market, service quality management is the key to the survival and success of businesses. SERVQUAL is a popular service quality measurement scale (SQMS) that has served as a basis for subsequent research on service quality; it has been used for testing different aspects of service quality in a market. The purpose of our study is, therefore, to develop a service quality measurement scale (SQMS) for the distributor–retailer interface of Pharm supply chains (PSC) in Iran. A survey was performed to collect data from pharmacies located in Tehran. A valid and reliable questionnaire delivered to pharmacies, and 400 pharmacies were intended to participate in our survey. Confirmatory factor analysis (CFA) was used to develop an SQMS in this study. Sufficient sampling was undertaken to do CFA. Consistent with other service quality studies, this Res developed an SQMS with five dimensions and 20 items for PSC, and contributes to mangers to regularly measure service quality. This is an initial study to develop a framework for measuring service quality in Iranian PCS. The framework can be used effectively to achieve competitive advantage at the distributor–retailer interface. PMID:28243297

The Live Access Server - A Web-Services Framework for Earth Science Data

NASA Astrophysics Data System (ADS)

Schweitzer, R.; Hankin, S. C.; Callahan, J. S.; O'Brien, K.; Manke, A.; Wang, X. Y.

2005-12-01

The Live Access Server (LAS) is a general purpose Web-server for delivering services related to geo-science data sets. Data providers can use the LAS architecture to build custom Web interfaces to their scientific data. Users and client programs can then access the LAS site to search the provider's on-line data holdings, make plots of data, create sub-sets in a variety of formats, compare data sets and perform analysis on the data. The Live Access server software has continued to evolve by expanding the types of data (in-situ observations and curvilinear grids) it can serve and by taking advantages of advances in software infrastructure both in the earth sciences community (THREDDS, the GrADS Data Server, the Anagram framework and Java netCDF 2.2) and in the Web community (Java Servlet and the Apache Jakarta frameworks). This presentation will explore the continued evolution of the LAS architecture towards a complete Web-services-based framework. Additionally, we will discuss the redesign and modernization of some of the support tools available to LAS installers. Soon after the initial implementation, the LAS architecture was redesigned to separate the components that are responsible for the user interaction (the User Interface Server) from the components that are responsible for interacting with the data and producing the output requested by the user (the Product Server). During this redesign, we changed the implementation of the User Interface Server from CGI and JavaScript to the Java Servlet specification using Apache Jakarta Velocity backed by a database store for holding the user interface widget components. The User Interface server is now quite flexible and highly configurable because we modernized the components used for the implementation. Meanwhile, the implementation of the Product Server has remained a Perl CGI-based system. Clearly, the time has come to modernize this part of the LAS architecture. Before undertaking such a modernization it is important to understand what we hope to gain. Specifically we would like to make it even easier to add new output products into our core system based on the Ferret analysis and visualization package. By carefully factoring the tasks needed to create a product we will be able to create new products simply by adding a description of the product into the configuration and by writing the Ferret script needed to create the product. No code will need to be added to the Product Server to bring the new product on-line. The new architecture should be faster at extracting and processing configuration information needed to address each request. Finally, the new Product Server architecture should make it even easier to pass specialized configuration information to the Product Server to deal with unanticipated special data structures or processing requirements.

Realising the Uncertainty Enabled Model Web

NASA Astrophysics Data System (ADS)

Cornford, D.; Bastin, L.; Pebesma, E. J.; Williams, M.; Stasch, C.; Jones, R.; Gerharz, L.

2012-12-01

The FP7 funded UncertWeb project aims to create the "uncertainty enabled model web". The central concept here is that geospatial models and data resources are exposed via standard web service interfaces, such as the Open Geospatial Consortium (OGC) suite of encodings and interface standards, allowing the creation of complex workflows combining both data and models. The focus of UncertWeb is on the issue of managing uncertainty in such workflows, and providing the standards, architecture, tools and software support necessary to realise the "uncertainty enabled model web". In this paper we summarise the developments in the first two years of UncertWeb, illustrating several key points with examples taken from the use case requirements that motivate the project. Firstly we address the issue of encoding specifications. We explain the usage of UncertML 2.0, a flexible encoding for representing uncertainty based on a probabilistic approach. This is designed to be used within existing standards such as Observations and Measurements (O&M) and data quality elements of ISO19115 / 19139 (geographic information metadata and encoding specifications) as well as more broadly outside the OGC domain. We show profiles of O&M that have been developed within UncertWeb and how UncertML 2.0 is used within these. We also show encodings based on NetCDF and discuss possible future directions for encodings in JSON. We then discuss the issues of workflow construction, considering discovery of resources (both data and models). We discuss why a brokering approach to service composition is necessary in a world where the web service interfaces remain relatively heterogeneous, including many non-OGC approaches, in particular the more mainstream SOAP and WSDL approaches. We discuss the trade-offs between delegating uncertainty management functions to the service interfaces themselves and integrating the functions in the workflow management system. We describe two utility services to address conversion between uncertainty types, and between the spatial / temporal support of service inputs / outputs. Finally we describe the tools being generated within the UncertWeb project, considering three main aspects: i) Elicitation of uncertainties on model inputs. We are developing tools to enable domain experts to provide judgements about input uncertainties from UncertWeb model components (e.g. parameters in meteorological models) which allow panels of experts to engage in the process and reach a consensus view on the current knowledge / beliefs about that parameter or variable. We are developing systems for continuous and categorical variables as well as stationary spatial fields. ii) Visualisation of the resulting uncertain outputs from the end of the workflow, but also at intermediate steps. At this point we have prototype implementations driven by the requirements from the use cases that motivate UncertWeb. iii) Sensitivity and uncertainty analysis on model outputs. Here we show the design of the overall system we are developing, including the deployment of an emulator framework to allow computationally efficient approaches. We conclude with a summary of the open issues and remaining challenges we are facing in UncertWeb, and provide a brief overview of how we plan to tackle these.

The interactive contents authoring system for terrestrial digital multimedia broadcasting

NASA Astrophysics Data System (ADS)

Cheong, Won-Sik; Ahn, Sangwoo; Cha, Jihun; Moon, Kyung Ae

2007-02-01

This paper introduces an interactive contents authoring system which can easily and conveniently produce interactive contents for the Terrestrial Digital Multimedia Broadcasting (T-DMB). For interactive broadcasting service, T-DMB adopted MPEG-4 Systems technology. In order to the interactive service becomes flourishing on the market, various types of interactive contents should be well provided prior to the service. In MPEG-4 Systems specification, broadcasting contents are described by the combination of a large number of nodes, routes and descriptors. In order to provide interactive data services through the T-DMB network, it is essential to have an interactive contents authoring system which allows contents authors to compose interactive contents easily and conveniently even if they lack any background on MPEG-4 Systems technology. The introduced authoring system provides powerful graphical user interface and produces interactive broadcasting contents in the forms of binary and textual format. Therefore, the interactive contents authoring system presented in this paper would vastly contribute to the flourishing interactive service.

Employing Semantic Technologies for the Orchestration of Government Services

NASA Astrophysics Data System (ADS)

Sabol, Tomáš; Furdík, Karol; Mach, Marián

The main aim of the eGovernment is to provide efficient, secure, inclusive services for its citizens and businesses. The necessity to integrate services and information resources, to increase accessibility, to reduce the administrative burden on citizens and enterprises - these are only a few reasons why the paradigm of the eGovernment has been shifted from the supply-driven approach toward the connected governance, emphasizing the concept of interoperability (Archmann and Nielsen 2008). On the EU level, the interoperability is explicitly addressed as one of the four main challenges, including in the i2010 strategy (i2010 2005). The Commission's Communication (Interoperability for Pan-European eGovernment Services 2006) strongly emphasizes the necessity of interoperable eGovernment services, based on standards, open specifications, and open interfaces. The Pan-European interoperability initiatives, such as the European Interoperability Framework (2004) and IDABC, as well as many projects supported by the European Commission within the IST Program and the Competitiveness and Innovation Program (CIP), illustrate the importance of interoperability on the EU level.

A database for TMT interface control documents

NASA Astrophysics Data System (ADS)

Gillies, Kim; Roberts, Scott; Brighton, Allan; Rogers, John

2016-08-01

The TMT Software System consists of software components that interact with one another through a software infrastructure called TMT Common Software (CSW). CSW consists of software services and library code that is used by developers to create the subsystems and components that participate in the software system. CSW also defines the types of components that can be constructed and their roles. The use of common component types and shared middleware services allows standardized software interfaces for the components. A software system called the TMT Interface Database System was constructed to support the documentation of the interfaces for components based on CSW. The programmer describes a subsystem and each of its components using JSON-style text files. A command interface file describes each command a component can receive and any commands a component sends. The event interface files describe status, alarms, and events a component publishes and status and events subscribed to by a component. A web application was created to provide a user interface for the required features. Files are ingested into the software system's database. The user interface allows browsing subsystem interfaces, publishing versions of subsystem interfaces, and constructing and publishing interface control documents that consist of the intersection of two subsystem interfaces. All published subsystem interfaces and interface control documents are versioned for configuration control and follow the standard TMT change control processes. Subsystem interfaces and interface control documents can be visualized in the browser or exported as PDF files.

A SOA broker solution for standard discovery and access services: the GI-cat framework

NASA Astrophysics Data System (ADS)

Boldrini, Enrico

2010-05-01

GI-cat ideal users are data providers or service providers within the geoscience community. The former have their data already available through an access service (e.g. an OGC Web Service) and would have it published through a standard catalog service, in a seamless way. The latter would develop a catalog broker and let users query and access different geospatial resources through one or more standard interfaces and Application Profiles (AP) (e.g. OGC CSW ISO AP, CSW ebRIM/EO AP, etc.). GI-cat actually implements a broker components (i.e. a middleware service) which carries out distribution and mediation functionalities among "well-adopted" catalog interfaces and data access protocols. GI-cat also publishes different discovery interfaces: the OGC CSW ISO and ebRIM Application Profiles (the latter coming with support for the EO and CIM extension packages) and two different OpenSearch interfaces developed in order to explore Web 2.0 possibilities. An extended interface is also available to exploit all available GI-cat features, such as interruptible incremental queries and queries feedback. Interoperability tests performed in the context of different projects have also pointed out the importance to enforce compatibility with existing and wide-spread tools of the open source community (e.g. GeoNetwork and Deegree catalogs), which was then achieved. Based on a service-oriented framework of modular components, GI-cat can effectively be customized and tailored to support different deployment scenarios. In addition to the distribution functionality an harvesting approach has been lately experimented, allowing the user to switch between a distributed and a local search giving thus more possibilities to support different deployment scenarios. A configurator tool is available in order to enable an effective high level configuration of the broker service. A specific geobrowser was also naturally developed, for demonstrating the advanced GI-cat functionalities. This client, called GI-go, is an example of the possible applications which may be built on top of the GI-cat broker component. GI-go allows discovering and browsing of the available datasets, retrieving and evaluating their description and performing distributed queries according to any combination of the following criteria: geographic area, temporal interval, topic of interest (free-text and/or keyword selection are allowed) and data source (i.e. where, when, what, who). The results set of a query (e.g. datasets metadata) are then displayed in an incremental way leveraging the asynchronous interactions approach implemented by GI-cat. This feature allows the user to access the intermediate query results. Query interruption and feedback features are also provided to the user. Alternatively, user may perform a browsing task by selecting a catalog resource from the current configuration and navigate through its aggregated and/or leaf datasets. In both cases datasets metadata, expressed according to ISO 19139 (and also Dublin Core and ebRIM if available), are displayed for download, along with a resource portrayal and actual data access (when this is meaningful and possible). The GI-cat distributed catalog service has been successfully deployed and experimented in the framework of different projects and initiative, including the SeaDataNet FP6 project, GEOSS IP3 (Interoperability Process Pilot Project), GEOSS AIP-2 (Architectural Implementation Project - Phase 2), FP7 GENESI-DR, CNR GIIDA, FP7 EUROGEOSS and ESA HMA project.

A Web Service and Interface for Remote Electronic Device Characterization

ERIC Educational Resources Information Center

Dutta, S.; Prakash, S.; Estrada, D.; Pop, E.

2011-01-01

A lightweight Web Service and a Web site interface have been developed, which enable remote measurements of electronic devices as a "virtual laboratory" for undergraduate engineering classes. Using standard browsers without additional plugins (such as Internet Explorer, Firefox, or even Safari on an iPhone), remote users can control a Keithley…

Micro-mechanics modelling of smart materials

NASA Astrophysics Data System (ADS)

Shah, Syed Asim Ali

Metal Matrix ceramic-reinforced composites are rapidly becoming strong candidates as structural materials for many high temperature and engineering applications. Metal matrix composites (MMC) combine the ductile properties of the matrix with a brittle phase of the reinforcement, leading to high stiffness and strength with a reduction in structural weight. The main objective of using a metal matrix composite system is to increase service temperature or improve specific mechanical properties of structural components by replacing existing super alloys.The purpose of the study is to investigate, develop and implement second phase reinforcement alloy strengthening empirical model with SiCp reinforced A359 aluminium alloy composites on the particle-matrix interface and the overall mechanical properties of the material.To predict the interfacial fracture strength of aluminium, in the presence of silicon segregation, an empirical model has been modified. This model considers the interfacial energy caused by segregation of impurities at the interface and uses Griffith crack type arguments to predict the formation energies of impurities at the interface. Based on this, model simulations were conducted at nano scale specifically at the interface and the interfacial strengthening behaviour of reinforced aluminium alloy system was expressed in terms of elastic modulus.The numerical model shows success in making prediction possible of trends in relation to segregation and interfacial fracture strength behaviour in SiC particle-reinforced aluminium matrix composites. The simulation models using various micro scale modelling techniques to the aluminum alloy matrix composite, strengthenedwith varying amounts of silicon carbide particulate were done to predict the material state at critical points with properties of Al-SiC which had been heat treated.In this study an algorithm is developed to model a hard ceramic particle in a soft matrix with a clear distinct interface and a strain based relationship has been proposed for the strengthening behaviour of the MMC at the interface rather than stress based, by successfully completing the numerical modelling of particulate reinforced metal matrix composites.

Handling of the demilitarized zone using service providers in SAP

NASA Astrophysics Data System (ADS)

Iovan, A.; Robu, R.

2016-02-01

External collaboration needs to allow data access from the Internet. In a trusted Internet collaboration scenario where the external user works on the same data like the internal user direct access to the data in the Intranet is required. The paper presents a solution to get access to certain data in the Enterprise Resource Planning system, having the User Interface on a system in the Demilitarized Zone and the database on a system which is located in the trusted area. Using the Service Provider Interface framework, connections between separate systems can be created in different areas of the network. The paper demonstrates how to connect the two systems, one in the Demilitarized Zone and one in the trusted area, using SAP ERP 6.0 with Enhancement Package 7. In order to use the Service Provider Interface SAP Business Suite Foundation component must be installed in both systems. The advantage of using the Service Provider Interface framework is that the external user works on the same data like the internal user (and not on copies). This assures data consistency and less overhead for backup and security systems.

Enabler for the agile virtual enterprise

NASA Astrophysics Data System (ADS)

Fuerst, Karl; Schmidt, Thomas; Wippel, Gerald

2001-10-01

In this presentation, a new approach for a flexible low-cost Internet extended enterprise (project FLoCI-EE) will be presented. FLoCI-EE is a project in the fifth framework program of the European commission with 8 partners from 4 countries, which started in January 2001 and will be finished in December 2003. The main objective of FLoCI-EE is the development of a software prototype, which enables flexible enterprise cooperation with the aim to design, manufacture and sell products commonly, independent of enterprise borderlines. The needed IT-support includes functions of product data management (PDM), enterprise resource planning (ERP), supply chain management (SCM) and customer relationship management (CRM). Especially for small and medium sized enterprises, existing solutions are too expensive and inflexible to be of use under current turbulent market conditions. The second part of this paper covers the item Web Services, because in the role-specific support approach of FLoCI-EE, there are user- interface-components, which are tailored for specific roles in an enterprise. These components integrate automatically the services of the so-called basic-components, and the externally offered Web Services like UDDI.

Preparing WIND for the STEREO Mission

NASA Astrophysics Data System (ADS)

Schroeder, P.; Ogilve, K.; Szabo, A.; Lin, R.; Luhmann, J.

2006-05-01

The upcoming STEREO mission's IMPACT and PLASTIC investigations will provide the first opportunity for long duration, detailed observations of 1 AU magnetic field structures, plasma ions and electrons, suprathermal electrons, and energetic particles at points bracketing Earth's heliospheric location. Stereoscopic/3D information from the STEREO SECCHI imagers and SWAVES radio experiment will make it possible to use both multipoint and quadrature studies to connect interplanetary Coronal Mass Ejections (ICME) and solar wind structures to CMEs and coronal holes observed at the Sun. To fully exploit these unique data sets, tight integration with similarly equipped missions at L1 will be essential, particularly WIND and ACE. The STEREO mission is building novel data analysis tools to take advantage of the mission's scientific potential. These tools will require reliable access and a well-documented interface to the L1 data sets. Such an interface already exists for ACE through the ACE Science Center. We plan to provide a similar service for the WIND mission that will supplement existing CDAWeb services. Building on tools also being developed for STEREO, we will create a SOAP application program interface (API) which will allow both our STEREO/WIND/ACE interactive browser and third-party software to access WIND data as a seamless and integral part of the STEREO mission. The API will also allow for more advanced forms of data mining than currently available through other data web services. Access will be provided to WIND-specific data analysis software as well. The development of cross-spacecraft data analysis tools will allow a larger scientific community to combine STEREO's unique in-situ data with those of other missions, particularly the L1 missions, and, therefore, to maximize STEREO's scientific potential in gaining a greater understanding of the heliosphere.

Addressing data access challenges in seismology

NASA Astrophysics Data System (ADS)

Trabant, C. M.; Ahern, T.; Weertman, B.; Benson, R. B.; Van Fossen, M.; Weekly, R. T.; Casey, R. E.; Suleiman, Y. Y.; Stults, M.

2016-12-01

The development of web services at the IRIS Data Management Center (DMC) over the last 6 years represents the most significant enhancement of data access ever introduced at the DMC. These web services have allowed the us to focus our internal operations around a single, consistent data access layer while facilitating development of a new generation of tools and methods for researchers to conduct their work. This effort led the DMC to propose standardized web service interfaces within the International Federation of Digital Seismograph Networks (FDSN), enabling other seismological data centers to offer data using compatible interfaces. With this new foundation, we now turn our attention to more advanced data access challenges. In particular, we will present the status of two developments intending to address 1) access to data of consistent quality for science and 2) discovery and access of data from multiple data centers. To address the challenge of requesting high or consistent quality data we will introduce our Research-Ready Data Sets (RRDS) initiative. The purpose of the RRDS project is to reduce the time a researcher spends culling and otherwise identifying data appropriate for given study. RRDS will provide users with additional criteria related to data quality that can be specified when requesting data. Leveraging the data quality measurements provided by our MUSTANG system, these criteria will include ambient noise, completeness, dead channel identification and more. To address the challenge of seismological data discovery and access, we have built and continue to improve the IRIS Federator. The Federator takes advantage of the FDSN-standard web services at various data centers to help a user locate specific channels, wherever they may be offered globally. The search interface provides results that are pre-formatted requests, ready for submission to each data center that serves that data. These two developments are aimed squarely at reducing the time researchers spend searching for, collecting and preparing data for processing.

The Materials Data Facility: Data Services to Advance Materials Science Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Blaiszik, B.; Chard, K.; Pruyne, J.

2016-07-06

With increasingly strict data management requirements from funding agencies and institutions, expanding focus on the challenges of research replicability, and growing data sizes and heterogeneity, new data needs are emerging in the materials community. The materials data facility (MDF) operates two cloudhosted services, data publication and data discovery, with features to promote open data sharing, self-service data publication and curation, and encourage data reuse, layered with powerful data discovery tools. The data publication service simplifies the process of copying data to a secure storage location, assigning data a citable persistent identifier, and recording custom (e.g., material, technique, or instrument specific)andmore » automatically-extractedmetadata in a registrywhile the data discovery service will provide advanced search capabilities (e.g., faceting, free text range querying, and full text search) against the registered data and metadata. TheMDF services empower individual researchers, research projects, and institutions to (I) publish research datasets, regardless of size, from local storage, institutional data stores, or cloud storage, without involvement of thirdparty publishers; (II) build, share, and enforce extensible domain-specific custom metadata schemas; (III) interact with published data and metadata via representational state transfer (REST) application program interfaces (APIs) to facilitate automation, analysis, and feedback; and (IV) access a data discovery model that allows researchers to search, interrogate, and eventually build on existing published data. We describe MDF’s design, current status, and future plans.« less

The Materials Data Facility: Data Services to Advance Materials Science Research

NASA Astrophysics Data System (ADS)

Blaiszik, B.; Chard, K.; Pruyne, J.; Ananthakrishnan, R.; Tuecke, S.; Foster, I.

2016-08-01

With increasingly strict data management requirements from funding agencies and institutions, expanding focus on the challenges of research replicability, and growing data sizes and heterogeneity, new data needs are emerging in the materials community. The materials data facility (MDF) operates two cloud-hosted services, data publication and data discovery, with features to promote open data sharing, self-service data publication and curation, and encourage data reuse, layered with powerful data discovery tools. The data publication service simplifies the process of copying data to a secure storage location, assigning data a citable persistent identifier, and recording custom (e.g., material, technique, or instrument specific) and automatically-extracted metadata in a registry while the data discovery service will provide advanced search capabilities (e.g., faceting, free text range querying, and full text search) against the registered data and metadata. The MDF services empower individual researchers, research projects, and institutions to (I) publish research datasets, regardless of size, from local storage, institutional data stores, or cloud storage, without involvement of third-party publishers; (II) build, share, and enforce extensible domain-specific custom metadata schemas; (III) interact with published data and metadata via representational state transfer (REST) application program interfaces (APIs) to facilitate automation, analysis, and feedback; and (IV) access a data discovery model that allows researchers to search, interrogate, and eventually build on existing published data. We describe MDF's design, current status, and future plans.

Ion-Specific Induced Fluctuations and Free Energetics of Aqueous Protein Hydrophobic Interfaces: Toward Connecting to Specific-Ion Behaviors at Aqueous Liquid–Vapor Interfaces

PubMed Central

2015-01-01

We explore anion-induced interface fluctuations near protein–water interfaces using coarse-grained representations of interfaces as proposed by Willard and Chandler (J. Phys. Chem. B2010, 114, 1954−195820055377). We use umbrella sampling molecular dynamics to compute potentials of mean force along a reaction coordinate bridging the state where the anion is fully solvated and one where it is biased via harmonic restraints to remain at the protein–water interface. Specifically, we focus on fluctuations of an interface between water and a hydrophobic region of hydrophobin-II (HFBII), a 71 amino acid residue protein expressed by filamentous fungi and known for its ability to form hydrophobically mediated self-assemblies at interfaces such as a water/air interface. We consider the anions chloride and iodide that have been shown previously by simulations as displaying specific-ion behaviors at aqueous liquid–vapor interfaces. We find that as in the case of a pure liquid–vapor interface, at the hydrophobic protein–water interface, the larger, less charge-dense iodide anion displays a marginal interfacial stability compared with that of the smaller, more charge-dense chloride anion. Furthermore, consistent with the results at aqueous liquid–vapor interfaces, we find that iodide induces larger fluctuations of the protein–water interface than chloride. PMID:24701961

Joint Service Aircrew Mask (JSAM) Rotary Wing (RW): MPU-5 Noise Attenuation Performance

DTIC Science & Technology

2016-06-09

Swayne Ball Aerospace and Technologies Corp. Dayton, OH Hilary Gallagher Warfighter Interface Division Battlespace Acoustics Branch Wright... Acoustics Branch Battlespace Acoustics Branch Warfighter Interface Division //signed// WILLIAM E. RUSSELL Chief, Warfighter Interface...Directorate Warfighter Interface Division Battlespace Acoustics Branch Wright-Patterson AFB OH 45433 711 HPW/RHCB 11. SPONSOR

Formalize clinical processes into electronic health information systems: Modelling a screening service for diabetic retinopathy.

PubMed

Eguzkiza, Aitor; Trigo, Jesús Daniel; Martínez-Espronceda, Miguel; Serrano, Luis; Andonegui, José

2015-08-01

Most healthcare services use information and communication technologies to reduce and redistribute the workload associated with follow-up of chronic conditions. However, the lack of normalization of the information handled in and exchanged between such services hinders the scalability and extendibility. The use of medical standards for modelling and exchanging information, especially dual-model based approaches, can enhance the features of screening services. Hence, the approach of this paper is twofold. First, this article presents a generic methodology to model patient-centered clinical processes. Second, a proof of concept of the proposed methodology was conducted within the diabetic retinopathy (DR) screening service of the Health Service of Navarre (Spain) in compliance with a specific dual-model norm (openEHR). As a result, a set of elements required for deploying a model-driven DR screening service has been established, namely: clinical concepts, archetypes, termsets, templates, guideline definition rules, and user interface definitions. This model fosters reusability, because those elements are available to be downloaded and integrated in any healthcare service, and interoperability, since from then on such services can share information seamlessly. Copyright © 2015 Elsevier Inc. All rights reserved.

Design and implementation of interface units for high speed fiber optics local area networks and broadband integrated services digital networks

NASA Technical Reports Server (NTRS)

Tobagi, Fouad A.; Dalgic, Ismail; Pang, Joseph

1990-01-01

The design and implementation of interface units for high speed Fiber Optic Local Area Networks and Broadband Integrated Services Digital Networks are discussed. During the last years, a number of network adapters that are designed to support high speed communications have emerged. This approach to the design of a high speed network interface unit was to implement package processing functions in hardware, using VLSI technology. The VLSI hardware implementation of a buffer management unit, which is required in such architectures, is described.

Project INTERFACE: Identification of Effective Implementation Strategies for Integrating Microcomputer Instruction into Ongoing Educational Services for the Handicapped. Final Report, 1984-86.

ERIC Educational Resources Information Center

Shaw, Estelle; And Others

The monograph describes Project INTERFACE, a 2-year collaborative effort among the Board of Cooperative Educational Services (BOCES) of Nassau County (New York), Long Island University, and three local school districts. The project identified the "most effective" implementation strategies for integrating microcomputer instruction into…

Climate Model Diagnostic Analyzer Web Service System

NASA Astrophysics Data System (ADS)

Lee, S.; Pan, L.; Zhai, C.; Tang, B.; Jiang, J. H.

2014-12-01

We have developed a cloud-enabled web-service system that empowers physics-based, multi-variable model performance evaluations and diagnoses through the comprehensive and synergistic use of multiple observational data, reanalysis data, and model outputs. We have developed a methodology to transform an existing science application code into a web service using a Python wrapper interface and Python web service frameworks. The web-service system, called Climate Model Diagnostic Analyzer (CMDA), currently supports (1) all the observational datasets from Obs4MIPs and a few ocean datasets from NOAA and Argo, which can serve as observation-based reference data for model evaluation, (2) many of CMIP5 model outputs covering a broad range of atmosphere, ocean, and land variables from the CMIP5 specific historical runs and AMIP runs, and (3) ECMWF reanalysis outputs for several environmental variables in order to supplement observational datasets. Analysis capabilities currently supported by CMDA are (1) the calculation of annual and seasonal means of physical variables, (2) the calculation of time evolution of the means in any specified geographical region, (3) the calculation of correlation between two variables, (4) the calculation of difference between two variables, and (5) the conditional sampling of one physical variable with respect to another variable. A web user interface is chosen for CMDA because it not only lowers the learning curve and removes the adoption barrier of the tool but also enables instantaneous use, avoiding the hassle of local software installation and environment incompatibility. CMDA will be used as an educational tool for the summer school organized by JPL's Center for Climate Science in 2014. In order to support 30+ simultaneous users during the school, we have deployed CMDA to the Amazon cloud environment. The cloud-enabled CMDA will provide each student with a virtual machine while the user interaction with the system will remain the same through web-browser interfaces. The summer school will serve as a valuable testbed for the tool development, preparing CMDA to serve its target community: Earth-science modeling and model-analysis community.

Space Generic Open Avionics Architecture (SGOAA) standard specification

NASA Technical Reports Server (NTRS)

Wray, Richard B.; Stovall, John R.

1993-01-01

The purpose of this standard is to provide an umbrella set of requirements for applying the generic architecture interface model to the design of a specific avionics hardware/software system. This standard defines a generic set of system interface points to facilitate identification of critical interfaces and establishes the requirements for applying appropriate low level detailed implementation standards to those interface points. The generic core avionics system and processing architecture models provided herein are robustly tailorable to specific system applications and provide a platform upon which the interface model is to be applied.

Flight Telerobotic Servicer prototype simulator

NASA Astrophysics Data System (ADS)

Schein, Rob; Krauze, Linda; Hartley, Craig; Dickenson, Alan; Lavecchia, Tom; Working, Bob

A prototype simulator for the Flight Telerobotic Servicer (FTS) system is described for use in the design development of the FTS, emphasizing the hand controller and user interface. The simulator utilizes a graphics workstation based on rapid prototyping tools for systems analyses of the use of the user interface and the hand controller. Kinematic modeling, manipulator-control algorithms, and communications programs are contained in the software for the simulator. The hardwired FTS panels and operator interface for use on the STS Orbiter are represented graphically, and the simulated controls function as the final FTS system configuration does. The robotic arm moves based on the user hand-controller interface, and the joint angles and other data are given on the prototype of the user interface. This graphics simulation tool provides the means for familiarizing crewmembers with the FTS system operation, displays, and controls.

Breaking open the set top box

NASA Astrophysics Data System (ADS)

Banks, David; Wiley, Anthony; Catania, Nicolas; Coles, Alastair N.; Smith, Duncan; Baynham, Simon; Deliot, Eric; Chidzey, Rod

1998-02-01

In this paper we describe the work being done at HP Labs Bristol in the area of home networks and gateways. This work is based on the idea of breaking open the set top box by physically separating the access network specific functions from the application specific functions. The access network specific functions reside in an access network gateway that can be shared by many end user devices. The first section of the paper present the philosophy behind this approach. The end user devices and the access network gateways must be interconnected by a high bandwidth network which can offer a bounded delay service for delay sensitive traffic. We are advocating the use of IEEE 1394 for this network, and the next section of the paper gives a brief introduction to this technology. We then describe a prototype digital video broadcasting satellite compliant gateway that we have built. This gateway could be used, for example, by a PC for receiving a data service or by a digital TV for receiving an MPEG-2 video service. A control architecture is the presented which uses a PC application to provide a web based user interface to the system. Finally, we provide details of our work on extending the reach of IEEE 1394 and its standardization status.

2005 8th Annual Systems Engineering Conference. Volume 1, Tuesday

DTIC Science & Technology

2005-10-27

Services NCES Discovery Services Federated Search Denotes interface Service NCCP Oktoberfest 2004 101 Task: Global Strike Mission Planning NCCP Oktoberfest...Enterprise Service Management Security Services NCES Discovery Services Federated Search Service Test, cert and accreditation needs to be focused on small

Prototype Interoperability Document between NASA-JSC and DLR-GSOC Describing the CCSDS SM and C Mission Operations Prototype

NASA Technical Reports Server (NTRS)

Lucord, Steve A.; Gully, Sylvain

2009-01-01

The purpose of the PROTOTYPE INTEROPERABILITY DOCUMENT is to document the design and interfaces for the service providers and consumers of a Mission Operations prototype between JSC-OTF and DLR-GSOC. The primary goal is to test the interoperability sections of the CCSDS Spacecraft Monitor & Control (SM&C) Mission Operations (MO) specifications between both control centers. An additional goal is to provide feedback to the Spacecraft Monitor and Control (SM&C) working group through the Review Item Disposition (RID) process. This Prototype is considered a proof of concept and should increase the knowledge base of the CCSDS SM&C Mission Operations standards. No operational capabilities will be provided. The CCSDS Mission Operations (MO) initiative was previously called Spacecraft Monitor and Control (SM&C). The specifications have been renamed to better reflect the scope and overall objectives. The working group retains the name Spacecraft Monitor and Control working group and is under the Mission Operations and Information Services Area (MOIMS) of CCSDS. This document will refer to the specifications as SM&C Mission Operations, Mission Operations or just MO.

Formalisms for user interface specification and design

NASA Technical Reports Server (NTRS)

Auernheimer, Brent J.

1989-01-01

The application of formal methods to the specification and design of human-computer interfaces is described. A broad outline of human-computer interface problems, a description of the field of cognitive engineering and two relevant research results, the appropriateness of formal specification techniques, and potential NASA application areas are described.

Wireless Avionics Packet to Support Fault Tolerance for Flight Applications

NASA Technical Reports Server (NTRS)

Block, Gary L.; Whitaker, William D.; Dillon, James W.; Lux, James P.; Ahmad, Mohammad

2009-01-01

In this protocol and packet format, data traffic is monitored by all network interfaces to determine the health of transmitter and subsystems. When failures are detected, the network inter face applies its recover y policies to provide continued service despite the presence of faults. The protocol, packet format, and inter face are independent of the data link technology used. The current demonstration system supports both commercial off-the-shelf wireless connections and wired Ethernet connections. Other technologies such as 1553 or serial data links can be used for the network backbone. The Wireless Avionics packet is divided into three parts: a header, a data payload, and a checksum. The header has the following components: magic number, version, quality of service, time to live, sending transceiver, function code, payload length, source Application Data Interface (ADI) address, destination ADI address, sending node address, target node address, and a sequence number. The magic number is used to identify WAV packets, and allows the packet format to be updated in the future. The quality of service field allows routing decisions to be made based on this value and can be used to route critical management data over a dedicated channel. The time to live value is used to discard misrouted packets while the source transceiver is updated at each hop. This information is used to monitor the health of each transceiver in the network. To identify the packet type, the function code is used. Besides having a regular data packet, the system supports diagnostic packets for fault detection and isolation. The payload length specifies the number of data bytes in the payload, and this supports variable-length packets in the network. The source ADI is the address of the originating interface. This can be used by the destination application to identify the originating source of the packet where the address consists of a subnet, subsystem class within the subnet, a subsystem unit, and the local ADI number. The destination ADI is used to route the packet to its ultimate destination. At each hop, the sending interface uses the destination address to determine the next node for the data. The sending node is the node address of the interface that is broadcasting the packet. This field is used to determine the health of the subsystem that is sending the packet. In the case of a packet that traverses several intermediate nodes, it may be the node address of the intermediate node. The target node is the node address of the next hop for the packet. It may be an intermediate node, or the final destination for the packet. The sequence number is used to identify duplicate packets. Because each interface has multiple transceivers, the same packet will appear at both receivers. The sequence number allows the interface to correlate the reception and forward a single, unique packet for additional processing. The subnet field allows data traffic to be partitioned into segregated local networks to support large networks while keeping each subnet at a manageable size. This also keeps the routing table small enough so routing can be done by a simple table lookup in an FPGA device. The subsystem class identifies members of a set of redundant subsystems, and, in a hot standby configuration, all members of the subsystem class will receive the data packets. Only the active subsystem will generate data traffic. Specific units in a class of redundant units can be identified and, if the hot standby configuration is not used, packets will be directed to a specific subsystem unit.

Systems engineering interfaces: A model based approach

NASA Astrophysics Data System (ADS)

Fosse, E.; Delp, C. L.

The engineering of interfaces is a critical function of the discipline of Systems Engineering. Included in interface engineering are instances of interaction. Interfaces provide the specifications of the relevant properties of a system or component that can be connected to other systems or components while instances of interaction are identified in order to specify the actual integration to other systems or components. Current Systems Engineering practices rely on a variety of documents and diagrams to describe interface specifications and instances of interaction. The SysML[1] specification provides a precise model based representation for interfaces and interface instance integration. This paper will describe interface engineering as implemented by the Operations Revitalization Task using SysML, starting with a generic case and culminating with a focus on a Flight System to Ground Interaction. The reusability of the interface engineering approach presented as well as its extensibility to more complex interfaces and interactions will be shown. Model-derived tables will support the case studies shown and are examples of model-based documentation products.

DLESE Teaching Boxes and Beyond: A promising prototype for structuring web services to support concept- and inquiry-based STEM learning and interdisciplinary partnerships.

NASA Astrophysics Data System (ADS)

Davis, L.; Weatherley, J.; Bhushan, S.; Khan, H.; de La Chica, S.; Deardorff, R.

2004-12-01

An exciting pilot program took place this summer, pioneering the development of Digital Library for Earth System Education (DLESE) Teaching Boxes with the Univ. of CA. Berkeley Museum of Paleontology, SF State Univ., USGS and 7 middle/high school teachers from the San Francisco area. This session will share the DLESE Teaching Box concept, explain the pilot program, and explore the tremendous opportunities for expanding this notion to embrace interdisciplinary approaches to learning about the Earth in the undergraduate science and pre-service teaching arenas. A Teaching Box is a metaphor for an online assembly of interrelated learning concepts, digital resources, and cohesive narration that bridges the gap between discrete resources and understanding. Within a Teaching Box, an instructor or student can pick a topic and see the concepts that build an understanding of that topic, explore online resources that support learning of those concepts, and benefit from the narration (the glue) that weaves concepts, activities, and background information together into a complete teaching/learning story. In this session, we will demonstrate the emerging Teaching Box prototypes and explore how this platform may promote STEM learning by utilizing DLESE tools and services in ways that begin to blur traditional disciplinary boundaries, overcome limitations of discipline-specific vocabularies, and foster collaboration. We will show ways in which new DLESE Web Services could support learning in this highly contextualized environment. We will see glimpses of how learners and educators will be able to modify or create their own Teaching Boxes specific to a unit of study or course, and perhaps share them with the Earth Science Education community. We will see ways to stay abreast of current Earth events, emerging research, and real-time data and incorporate such dynamic information into one learning environment. Services will be described and demonstrated in the context of Teaching Boxes: - DLESE Web Services provide a programmatic interface that allows the Teaching Box (or any web page) to have the same DLESE search, bookmarking features, and data management that are found at the DLESE web site. - DLESE Smart Links are hyperlinks that can be created by anyone and implemented as easily as defining a specific query. Clicking a Smart Link displays a list of resources that corresponds to the specific query. We'll talk about how this service can help to bridge the gap between vocabularies and disciplines and the interesting possibilities it presents for contextualizing searches and building custom topical menus. - The Really Simple Syndication (RSS) service delivers online information immediately, and allows end-users to subscribe to receive regular news, events, and data on a given Teaching Box topic. This opens the door to event-based learning. - Strand Maps, developed by the AAAS, are diagrams of interconnected learning concepts across a range of science, technology, engineering, and mathematics disciplines. The University of Colorado and its project partners are developing the Strand Map Service (SMS) to provide an interactive interface to interrelated learning goals, content knowledge, (including student misconceptions) and educational resources in the National Science Digital Library and DLESE.

A Python library for FAIRer access and deposition to the Metabolomics Workbench Data Repository.

PubMed

Smelter, Andrey; Moseley, Hunter N B

2018-01-01

The Metabolomics Workbench Data Repository is a public repository of mass spectrometry and nuclear magnetic resonance data and metadata derived from a wide variety of metabolomics studies. The data and metadata for each study is deposited, stored, and accessed via files in the domain-specific 'mwTab' flat file format. In order to improve the accessibility, reusability, and interoperability of the data and metadata stored in 'mwTab' formatted files, we implemented a Python library and package. This Python package, named 'mwtab', is a parser for the domain-specific 'mwTab' flat file format, which provides facilities for reading, accessing, and writing 'mwTab' formatted files. Furthermore, the package provides facilities to validate both the format and required metadata elements of a given 'mwTab' formatted file. In order to develop the 'mwtab' package we used the official 'mwTab' format specification. We used Git version control along with Python unit-testing framework as well as continuous integration service to run those tests on multiple versions of Python. Package documentation was developed using sphinx documentation generator. The 'mwtab' package provides both Python programmatic library interfaces and command-line interfaces for reading, writing, and validating 'mwTab' formatted files. Data and associated metadata are stored within Python dictionary- and list-based data structures, enabling straightforward, 'pythonic' access and manipulation of data and metadata. Also, the package provides facilities to convert 'mwTab' files into a JSON formatted equivalent, enabling easy reusability of the data by all modern programming languages that implement JSON parsers. The 'mwtab' package implements its metadata validation functionality based on a pre-defined JSON schema that can be easily specialized for specific types of metabolomics studies. The library also provides a command-line interface for interconversion between 'mwTab' and JSONized formats in raw text and a variety of compressed binary file formats. The 'mwtab' package is an easy-to-use Python package that provides FAIRer utilization of the Metabolomics Workbench Data Repository. The source code is freely available on GitHub and via the Python Package Index. Documentation includes a 'User Guide', 'Tutorial', and 'API Reference'. The GitHub repository also provides 'mwtab' package unit-tests via a continuous integration service.

'Who does what' in the orthodontic workforce.

PubMed

Hodge, T; Parkin, N

2015-02-16

The contraction of the economy in the United Kingdom and constraints on the National Health Service (NHS) together with new opportunities for the delivery of orthodontic treatment has resulted in an increasing number of dental personnel across the different registrant groups. This article focuses on the changes that have taken place in the orthodontic workforce over the past decade. Although others help deliver orthodontic services such as material suppliers, treatment coordinators and those involved in marketing, this article will restrict itself to informing the reader specifically about which dental registrants are doing what at the clinical interface. How health professionals have developed their skills to undertake the role they play within the team and possible threats arising because of these changes are also discussed.

WeBIAS: a web server for publishing bioinformatics applications.

PubMed

Daniluk, Paweł; Wilczyński, Bartek; Lesyng, Bogdan

2015-11-02

One of the requirements for a successful scientific tool is its availability. Developing a functional web service, however, is usually considered a mundane and ungratifying task, and quite often neglected. When publishing bioinformatic applications, such attitude puts additional burden on the reviewers who have to cope with poorly designed interfaces in order to assess quality of presented methods, as well as impairs actual usefulness to the scientific community at large. In this note we present WeBIAS-a simple, self-contained solution to make command-line programs accessible through web forms. It comprises a web portal capable of serving several applications and backend schedulers which carry out computations. The server handles user registration and authentication, stores queries and results, and provides a convenient administrator interface. WeBIAS is implemented in Python and available under GNU Affero General Public License. It has been developed and tested on GNU/Linux compatible platforms covering a vast majority of operational WWW servers. Since it is written in pure Python, it should be easy to deploy also on all other platforms supporting Python (e.g. Windows, Mac OS X). Documentation and source code, as well as a demonstration site are available at http://bioinfo.imdik.pan.pl/webias . WeBIAS has been designed specifically with ease of installation and deployment of services in mind. Setting up a simple application requires minimal effort, yet it is possible to create visually appealing, feature-rich interfaces for query submission and presentation of results.

A Shared Infrastructure for Federated Search Across Distributed Scientific Metadata Catalogs

NASA Astrophysics Data System (ADS)

Reed, S. A.; Truslove, I.; Billingsley, B. W.; Grauch, A.; Harper, D.; Kovarik, J.; Lopez, L.; Liu, M.; Brandt, M.

2013-12-01

The vast amount of science metadata can be overwhelming and highly complex. Comprehensive analysis and sharing of metadata is difficult since institutions often publish to their own repositories. There are many disjoint standards used for publishing scientific data, making it difficult to discover and share information from different sources. Services that publish metadata catalogs often have different protocols, formats, and semantics. The research community is limited by the exclusivity of separate metadata catalogs and thus it is desirable to have federated search interfaces capable of unified search queries across multiple sources. Aggregation of metadata catalogs also enables users to critique metadata more rigorously. With these motivations in mind, the National Snow and Ice Data Center (NSIDC) and Advanced Cooperative Arctic Data and Information Service (ACADIS) implemented two search interfaces for the community. Both the NSIDC Search and ACADIS Arctic Data Explorer (ADE) use a common infrastructure which keeps maintenance costs low. The search clients are designed to make OpenSearch requests against Solr, an Open Source search platform. Solr applies indexes to specific fields of the metadata which in this instance optimizes queries containing keywords, spatial bounds and temporal ranges. NSIDC metadata is reused by both search interfaces but the ADE also brokers additional sources. Users can quickly find relevant metadata with minimal effort and ultimately lowers costs for research. This presentation will highlight the reuse of data and code between NSIDC and ACADIS, discuss challenges and milestones for each project, and will identify creation and use of Open Source libraries.

NASA Reverb: Standards-Driven Earth Science Data and Service Discovery

NASA Astrophysics Data System (ADS)

Cechini, M. F.; Mitchell, A.; Pilone, D.

2011-12-01

NASA's Earth Observing System Data and Information System (EOSDIS) is a core capability in NASA's Earth Science Data Systems Program. NASA's EOS ClearingHOuse (ECHO) is a metadata catalog for the EOSDIS, providing a centralized catalog of data products and registry of related data services. Working closely with the EOSDIS community, the ECHO team identified a need to develop the next generation EOS data and service discovery tool. This development effort relied on the following principles: + Metadata Driven User Interface - Users should be presented with data and service discovery capabilities based on dynamic processing of metadata describing the targeted data. + Integrated Data & Service Discovery - Users should be able to discovery data and associated data services that facilitate their research objectives. + Leverage Common Standards - Users should be able to discover and invoke services that utilize common interface standards. Metadata plays a vital role facilitating data discovery and access. As data providers enhance their metadata, more advanced search capabilities become available enriching a user's search experience. Maturing metadata formats such as ISO 19115 provide the necessary depth of metadata that facilitates advanced data discovery capabilities. Data discovery and access is not limited to simply the retrieval of data granules, but is growing into the more complex discovery of data services. These services include, but are not limited to, services facilitating additional data discovery, subsetting, reformatting, and re-projecting. The discovery and invocation of these data services is made significantly simpler through the use of consistent and interoperable standards. By utilizing an adopted standard, developing standard-specific adapters can be utilized to communicate with multiple services implementing a specific protocol. The emergence of metadata standards such as ISO 19119 plays a similarly important role in discovery as the 19115 standard. After a yearlong design, development, and testing process, the ECHO team successfully released "Reverb - The Next Generation Earth Science Discovery Tool." Reverb relies heavily on the information contained in dataset and granule metadata, such as ISO 19115, to provide a dynamic experience to users based on identified search facet values extracted from science metadata. Such an approach allows users to perform cross-dataset correlation and searches, discovering additional data that they may not previously have been aware of. In addition to data discovery, Reverb users may discover services associated with their data of interest. When services utilize supported standards and/or protocols, Reverb can facilitate the invocation of both synchronous and asynchronous data processing services. This greatly enhances a users ability to discover data of interest and accomplish their research goals. Extrapolating on the current movement towards interoperable standards and an increase in available services, data service invocation and chaining will become a natural part of data discovery. Reverb is one example of a discovery tool that provides a mechanism for transforming the earth science data discovery paradigm.

Service offerings and interfaces for the ACTS network of Earth stations

NASA Technical Reports Server (NTRS)

Coney, Thom A.

1988-01-01

The Advanced Communications Satellite (ACTS) is capable of two modes of communication. Mode 1 is a mesh network of Earth stations using baseband-switched, time-division multiple-access (BBS-TDMA) and hopping beams. Mode 2 is a mesh network using satellite-switched, time-division multiple-access (SS-TDMA) and fixed (or hopping) beams. The purpose of this paper is to present the functional requirements and the design of the ACTS Mode 1 Earth station terrestrial interface. Included among the requirements are that: (1) the interface support standard telecommunications service offerings (i.e., voice, video and data at rates ranging from 9.6 kbps to 44 Mbps); (2) the interface support the unique design characteristics of the ACTS communications systems (e.g., the real time demand assignment of satellite capacity); and (3) the interface support test hardware capable of validating ACTS communications processes. The resulting interface design makes use of an appropriate combination of T1 or T3 multiplexers and a small central office (maximum capacity 56 subscriber lines per unit).

Command module/service module reaction control subsystem assessment

NASA Technical Reports Server (NTRS)

Weary, D. P.

1971-01-01

Detailed review of component failure histories, qualification adequacy, manufacturing flow, checkout requirements and flow, ground support equipment interfaces, subsystem interface verification, protective devices, and component design did not reveal major weaknesses in the command service module (CSM) reaction control system (RCS). No changes to the CSM RCS were recommended. The assessment reaffirmed the adequacy of the CSM RCS for future Apollo missions.

SeWeR: a customizable and integrated dynamic HTML interface to bioinformatics services.

PubMed

Basu, M K

2001-06-01

Sequence analysis using Web Resources (SeWeR) is an integrated, Dynamic HTML (DHTML) interface to commonly used bioinformatics services available on the World Wide Web. It is highly customizable, extendable, platform neutral, completely server-independent and can be hosted as a web page as well as being used as stand-alone software running within a web browser.

Participation as Governmentality? The Effect of Disciplinary Technologies at the Interface of Service Users and Providers, Families and the State

ERIC Educational Resources Information Center

McKay, Jane; Garratt, Dean

2013-01-01

This paper examines the concept of participation in relation to a range of recently imposed social and education policies. Drawing on recent empirical research, we explore how disciplinary technologies, including government policy, operate at the interface of service users and providers, and examine the interactional aspects of participation where…

Coloc-stats: a unified web interface to perform colocalization analysis of genomic features.

PubMed

Simovski, Boris; Kanduri, Chakravarthi; Gundersen, Sveinung; Titov, Dmytro; Domanska, Diana; Bock, Christoph; Bossini-Castillo, Lara; Chikina, Maria; Favorov, Alexander; Layer, Ryan M; Mironov, Andrey A; Quinlan, Aaron R; Sheffield, Nathan C; Trynka, Gosia; Sandve, Geir K

2018-06-05

Functional genomics assays produce sets of genomic regions as one of their main outputs. To biologically interpret such region-sets, researchers often use colocalization analysis, where the statistical significance of colocalization (overlap, spatial proximity) between two or more region-sets is tested. Existing colocalization analysis tools vary in the statistical methodology and analysis approaches, thus potentially providing different conclusions for the same research question. As the findings of colocalization analysis are often the basis for follow-up experiments, it is helpful to use several tools in parallel and to compare the results. We developed the Coloc-stats web service to facilitate such analyses. Coloc-stats provides a unified interface to perform colocalization analysis across various analytical methods and method-specific options (e.g. colocalization measures, resolution, null models). Coloc-stats helps the user to find a method that supports their experimental requirements and allows for a straightforward comparison across methods. Coloc-stats is implemented as a web server with a graphical user interface that assists users with configuring their colocalization analyses. Coloc-stats is freely available at https://hyperbrowser.uio.no/coloc-stats/.

Decision Aids Using Heterogeneous Intelligence Analysis

DTIC Science & Technology

2010-08-20

developing a Geocultural service, a software framework and inferencing engine for the Transparent Urban Structures program. The scope of the effort...has evolved as the program has matured and is including multiple data sources, as well as interfaces out to the ONR architectural framework . Tasks...Interface; Application Program Interface; Application Programmer Interface CAF Common Application Framework EDA Event Driven Architecture a 16. SECURITY

Save medical personnel's time by improved user interfaces.

PubMed

Kindler, H

1997-01-01

Common objectives in the industrial countries are the improvement of quality of care, clinical effectiveness, and cost control. Cost control, in particular, has been addressed through the introduction of case mix systems for reimbursement by social-security institutions. More data is required to enable quality improvement, increases in clinical effectiveness and for juridical reasons. At first glance, this documentation effort is contradictory to cost reduction. However, integrated services for resource management based on better documentation should help to reduce costs. The clerical effort for documentation should be decreased by providing a co-operative working environment for healthcare professionals applying sophisticated human-computer interface technology. Additional services, e.g., automatic report generation, increase the efficiency of healthcare personnel. Modelling the medical work flow forms an essential prerequisite for integrated resource management services and for co-operative user interfaces. A user interface aware of the work flow provides intelligent assistance by offering the appropriate tools at the right moment. Nowadays there is a trend to client/server systems with relational databases or object-oriented databases as repository. The work flows used for controlling purposes and to steer the user interfaces must be represented in the repository.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, James J.; Brettin, Thomas; Dietrich, Emily M.

Here, the Pathosystems Resource Integration Center (PATRIC) is the bacterial Bioinformatics Resource Center. Recent changes to PATRIC include a redesign of the web interface and some new services that provide users with a platform that takes them from raw reads to an integrated analysis experience. The redesigned interface allows researchers direct access to tools and data, and the emphasis has changed to user-created genome-groups, with detailed summaries and views of the data that researchers have selected. Perhaps the biggest change has been the enhanced capability for researchers to analyze their private data and compare it to the available public data.more » Researchers can assemble their raw sequence reads and annotate the contigs using RASTtk. PATRIC also provides services for RNA-Seq, variation, model reconstruction and differential expression analysis, all delivered through an updated private workspace. Private data can be compared by `virtual integration' to any of PATRIC's public data. The number of genomes available for comparison in PATRIC has expanded to over 80 000, with a special emphasis on genomes with antimicrobial resistance data. PATRIC uses this data to improve both subsystem annotation and k-mer classification, and tags new genomes as having signatures that indicate susceptibility or resistance to specific antibiotics.« less

Finding, Browsing and Getting Data Easily Using SPDF Web Services

NASA Technical Reports Server (NTRS)

Candey, R.; Chimiak, R.; Harris, B.; Johnson, R.; Kovalick, T.; Lal, N.; Leckner, H.; Liu, M.; McGuire, R.; Papitashvili, N.;

Aggregating Queries Against Large Inventories of Remotely Accessible Data

NASA Astrophysics Data System (ADS)

Gallagher, J. H. R.; Fulker, D. W.

2016-12-01

Those seeking to discover data for a specific purpose often encounter search results that are so large as to be useless without computing assistance. This situation arises, with increasing frequency, in part because repositories contain ever greater numbers of granules, and their granularities may well be poorly aligned or even orthogonal to the data-selection needs of the user. This presentation describes a recently developed service for simultaneously querying large lists of OPeNDAP-accessible granules to extract specified data. The specifications include a richly expressive set of data-selection criteria—applicable to content as well as metadata—and the service has been tested successfully against lists naming hundreds of thousands of granules. Querying such numbers of local files (i.e., granules) on a desktop or laptop computer is practical (by using a scripting language, e.g.), but this practicality is diminished when the data are remote and thus best accessed through a Web-services interface. In these cases, which are increasingly common, scripted queries can take many hours because of inherent network latencies. Furthermore, communication dropouts can add fragility to such scripts, yielding gaps in the acquired results. In contrast, OPeNDAP's new aggregated-query services enable data discovery in the context of very large inventory sizes. These capabilities have been developed for use with OPeNDAP's Hyrax server, which is an open-source realization of DAP (for "Data Access Protocol," a specification widely used in NASA, NOAA and other data-intensive contexts). These aggregated-query services exhibit good response times (on the order of seconds, not hours) even for inventories that list hundreds of thousands of source granules.

Cloud Computing with iPlant Atmosphere.

PubMed

McKay, Sheldon J; Skidmore, Edwin J; LaRose, Christopher J; Mercer, Andre W; Noutsos, Christos

2013-10-15

Cloud Computing refers to distributed computing platforms that use virtualization software to provide easy access to physical computing infrastructure and data storage, typically administered through a Web interface. Cloud-based computing provides access to powerful servers, with specific software and virtual hardware configurations, while eliminating the initial capital cost of expensive computers and reducing the ongoing operating costs of system administration, maintenance contracts, power consumption, and cooling. This eliminates a significant barrier to entry into bioinformatics and high-performance computing for many researchers. This is especially true of free or modestly priced cloud computing services. The iPlant Collaborative offers a free cloud computing service, Atmosphere, which allows users to easily create and use instances on virtual servers preconfigured for their analytical needs. Atmosphere is a self-service, on-demand platform for scientific computing. This unit demonstrates how to set up, access and use cloud computing in Atmosphere. Copyright © 2013 John Wiley & Sons, Inc.

PCS subscriber profile data and information requirements

NASA Astrophysics Data System (ADS)

Schumacher, Gregory D.

1996-01-01

Enhanced services for mobile subscribers are currently undergoing significant growth. This growth will continue to increase as more wireless serviceproviders enter the marketplace. Profit margins for basic service will fall as competition increases leading to interest in higher margin enhanced services. Likewise subscribers will demand enhanced services to further increase productivity over basic wire service. However there are limitations in today's network infrastructure defined by inter-system interface standards such as IS-41, GSM and WACS. These network limitations prevent enhanced services from being offered in the seamless and geographically ubiquitous fashion subscribers are familiar with in basic wireless service. This paper examines what are the needs of wireless enhanced services to be provided as subscribers want them. This paper then looks at the major inter-system interfaces available for mobility and call control in terms of how well these enhanced service needs are fulfilled.

Servicing capability for the evolutionary Space Station

NASA Technical Reports Server (NTRS)

Thomas, Edward F.; Grems, Edward G., III; Corbo, James E.

1990-01-01

Since the beginning of the Space Station Freedom (SSF) program the concept of on-orbit servicing of user hardware has been an integral part of the program implementation. The user servicing system architecture has been divided into a baseline and a growth phase. The baseline system consists of the following hardware elements that will support user servicing - flight telerobotic servicer, crew and equipment translation aid, crew intravehicular and extravehicular servicing support, logistics supply system, mobile servicing center, and the special purpose dextrous manipulator. The growth phase incorporates a customer servicing facility (CSF), a station-based orbital maneuvering vehicle and an orbital spacecraft consumables resupply system. The requirements for user servicing were derived from the necessity to service attached payloads, free flyers and coorbiting platforms. These requirements include: orbital replacement units (ORU) and instrument changeout, National Space Transportation System cargo bay loading and unloading, contamination control and monitoring, thermal protection, payload berthing, storage, access to SSF distributed systems, functional checkout, and fluid replenishment. The baseline user servicing capabilities accommodate ORU and instrument changeout. However, this service is limited to attached payloads, either in situ or at a locally adjacent site. The growth phase satisfies all identified user servicing requirements by expanding servicing capabilities to include complex servicing tasks for attached payloads, free-flyers and coorbiting platforms at a dedicated, protected Servicing site. To provide a smooth evolution of user servicing the SSF interfaces that are necessary to accommodate the growth phase have been identified. The interface requirements on SSF have been greatly simplified by accommodating the growth servicing support elements within the CSF. This results in a single SSF interface: SSF to the CSF.

Automation Hooks Architecture for Flexible Test Orchestration - Concept Development and Validation

NASA Technical Reports Server (NTRS)

Lansdowne, C. A.; Maclean, John R.; Winton, Chris; McCartney, Pat

2011-01-01

The Automation Hooks Architecture Trade Study for Flexible Test Orchestration sought a standardized data-driven alternative to conventional automated test programming interfaces. The study recommended composing the interface using multicast DNS (mDNS/SD) service discovery, Representational State Transfer (Restful) Web Services, and Automatic Test Markup Language (ATML). We describe additional efforts to rapidly mature the Automation Hooks Architecture candidate interface definition by validating it in a broad spectrum of applications. These activities have allowed us to further refine our concepts and provide observations directed toward objectives of economy, scalability, versatility, performance, severability, maintainability, scriptability and others.

Pragmatic service development and customisation with the CEDA OGC Web Services framework

NASA Astrophysics Data System (ADS)

Pascoe, Stephen; Stephens, Ag; Lowe, Dominic

2010-05-01

The CEDA OGC Web Services framework (COWS) emphasises rapid service development by providing a lightweight layer of OGC web service logic on top of Pylons, a mature web application framework for the Python language. This approach gives developers a flexible web service development environment without compromising access to the full range of web application tools and patterns: Model-View-Controller paradigm, XML templating, Object-Relational-Mapper integration and authentication/authorization. We have found this approach useful for exploring evolving standards and implementing protocol extensions to meet the requirements of operational deployments. This paper outlines how COWS is being used to implement customised WMS, WCS, WFS and WPS services in a variety of web applications from experimental prototypes to load-balanced cluster deployments serving 10-100 simultaneous users. In particular we will cover 1) The use of Climate Science Modeling Language (CSML) in complex-feature aware WMS, WCS and WFS services, 2) Extending WMS to support applications with features specific to earth system science and 3) A cluster-enabled Web Processing Service (WPS) supporting asynchronous data processing. The COWS WPS underpins all backend services in the UK Climate Projections User Interface where users can extract, plot and further process outputs from a multi-dimensional probabilistic climate model dataset. The COWS WPS supports cluster job execution, result caching, execution time estimation and user management. The COWS WMS and WCS components drive the project-specific NCEO and QESDI portals developed by the British Atmospheric Data Centre. These portals use CSML as a backend description format and implement features such as multiple WMS layer dimensions and climatology axes that are beyond the scope of general purpose GIS tools and yet vital for atmospheric science applications.

AAL Platform with a “De Facto” Standard Communication Interface (TICO): Training in Home Control in Special Education

PubMed Central

Guillomía San Bartolomé, Miguel A.; Artigas Maestre, José Ignacio; Sánchez Agustín, Ana

2017-01-01

Framed within a long-term cooperation between university and special education teachers, training in alternative communication skills and home control was realized using the “TICO” interface, a communication panel editor extensively used in special education schools. From a technological view we follow AAL technology trends by integrating a successful interface in a heterogeneous services AAL platform, focusing on a functional view. Educationally, a very flexible interface in line with communication training allows dynamic adjustment of complexity, enhanced by an accessible mindset and virtual elements significance already in use, offers specific interaction feedback, adapts to the evolving needs and capacities and improves the personal autonomy and self-confidence of children at school and home. TICO-home-control was installed during the last school year in the library of a special education school to study adaptations and training strategies to enhance the autonomy opportunities of its pupils. The methodology involved a case study and structured and semi-structured observations. Five children, considered unable to use commercial home control systems were trained obtaining good results in enabling them to use an open home control system. Moreover this AAL platform has proved efficient in training children in previous cognitive steps like virtual representation and cause-effect interaction. PMID:29023383

AAL Platform with a "De Facto" Standard Communication Interface (TICO): Training in Home Control in Special Education.

PubMed

Guillomía San Bartolomé, Miguel A; Falcó Boudet, Jorge L; Artigas Maestre, José Ignacio; Sánchez Agustín, Ana

2017-10-12

Framed within a long-term cooperation between university and special education teachers, training in alternative communication skills and home control was realized using the "TICO" interface, a communication panel editor extensively used in special education schools. From a technological view we follow AAL technology trends by integrating a successful interface in a heterogeneous services AAL platform, focusing on a functional view. Educationally, a very flexible interface in line with communication training allows dynamic adjustment of complexity, enhanced by an accessible mindset and virtual elements significance already in use, offers specific interaction feedback, adapts to the evolving needs and capacities and improves the personal autonomy and self-confidence of children at school and home. TICO-home-control was installed during the last school year in the library of a special education school to study adaptations and training strategies to enhance the autonomy opportunities of its pupils. The methodology involved a case study and structured and semi-structured observations. Five children, considered unable to use commercial home control systems were trained obtaining good results in enabling them to use an open home control system. Moreover this AAL platform has proved efficient in training children in previous cognitive steps like virtual representation and cause-effect interaction.

Stackable middleware services for advanced multimedia applications. Final report for period July 14, 1999 - July 14, 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, Wu-chi; Crawfis, Roger, Weide, Bruce

2002-02-01

In this project, the authors propose the research, development, and distribution of a stackable component-based multimedia streaming protocol middleware service. The goals of this stackable middleware interface include: (1) The middleware service will provide application writers and scientists easy to use interfaces that support their visualization needs. (2) The middleware service will support a variety of image compression modes. Currently, many of the network adaptation protocols for video have been developed with DCT-based compression algorithms like H.261, MPEG-1, or MPEG-2 in mind. It is expected that with advanced scientific computing applications that the lossy compression of the image data willmore » be unacceptable in certain instances. The middleware service will support several in-line lossless compression modes for error-sensitive scientific visualization data. (3) The middleware service will support two different types of streaming video modes: one for interactive collaboration of scientists and a stored video streaming mode for viewing prerecorded animations. The use of two different streaming types will allow the quality of the video delivered to the user to be maximized. Most importantly, this service will happen transparently to the user (with some basic controls exported to the user for domain specific tweaking). In the spirit of layered network protocols (like ISO and TCP/IP), application writers should not have to know a large amount about lower level network details. Currently, many example video streaming players have their congestion management techniques tightly integrated into the video player itself and are, for the most part, ''one-off'' applications. As more networked multimedia and video applications are written in the future, a larger percentage of these programmers and scientist will most likely know little about the underlying networking layer. By providing a simple, powerful, and semi-transparent middleware layer, the successful completion of this project will help serve as a catalyst to support future video-based applications, particularly those of advanced scientific computing applications.« less

GUEST EDITORS' INTRODUCTION: Guest Editors' introduction

NASA Astrophysics Data System (ADS)

Guerraoui, Rachid; Vinoski, Steve

1997-09-01

The organization of a distributed system can have a tremendous impact on its capabilities, its performance, and its ability to evolve to meet changing requirements. For example, the client - server organization model has proven to be adequate for organizing a distributed system as a number of distributed servers that offer various functions to client processes across the network. However, it lacks peer-to-peer capabilities, and experience with the model has been predominantly in the context of local networks. To achieve peer-to-peer cooperation in a more global context, systems issues of scale, heterogeneity, configuration management, accounting and sharing are crucial, and the complexity of migrating from locally distributed to more global systems demands new tools and techniques. An emphasis on interfaces and modules leads to the modelling of a complex distributed system as a collection of interacting objects that communicate with each other only using requests sent to well defined interfaces. Although object granularity typically varies at different levels of a system architecture, the same object abstraction can be applied to various levels of a computing architecture. Since 1989, the Object Management Group (OMG), an international software consortium, has been defining an architecture for distributed object systems called the Object Management Architecture (OMA). At the core of the OMA is a `software bus' called an Object Request Broker (ORB), which is specified by the OMG Common Object Request Broker Architecture (CORBA) specification. The OMA distributed object model fits the structure of heterogeneous distributed applications, and is applied in all layers of the OMA. For example, each of the OMG Object Services, such as the OMG Naming Service, is structured as a set of distributed objects that communicate using the ORB. Similarly, higher-level OMA components such as Common Facilities and Domain Interfaces are also organized as distributed objects that can be layered over both Object Services and the ORB. The OMG creates specifications, not code, but the interfaces it standardizes are always derived from demonstrated technology submitted by member companies. The specified interfaces are written in a neutral Interface Definition Language (IDL) that defines contractual interfaces with potential clients. Interfaces written in IDL can be translated to a number of programming languages via OMG standard language mappings so that they can be used to develop components. The resulting components can transparently communicate with other components written in different languages and running on different operating systems and machine types. The ORB is responsible for providing the illusion of `virtual homogeneity' regardless of the programming languages, tools, operating systems and networks used to realize and support these components. With the adoption of the CORBA 2.0 specification in 1995, these components are able to interoperate across multi-vendor CORBA-based products. More than 700 member companies have joined the OMG, including Hewlett-Packard, Digital, Siemens, IONA Technologies, Netscape, Sun Microsystems, Microsoft and IBM, which makes it the largest standards body in existence. These companies continue to work together within the OMG to refine and enhance the OMA and its components. This special issue of Distributed Systems Engineering publishes five papers that were originally presented at the `Distributed Object-Based Platforms' track of the 30th Hawaii International Conference on System Sciences (HICSS), which was held in Wailea on Maui on 6 - 10 January 1997. The papers, which were selected based on their quality and the range of topics they cover, address different aspects of CORBA, including advanced aspects such as fault tolerance and transactions. These papers discuss the use of CORBA and evaluate CORBA-based development for different types of distributed object systems and architectures. The first paper, by S Rahkila and S Stenberg, discusses the application of CORBA to telecommunication management networks. In the second paper, P Narasimhan, L E Moser and P M Melliar-Smith present a fault-tolerant extension of an ORB. The third paper, by J Liang, S Sédillot and B Traverson, provides an overview of the CORBA Transaction Service and its integration with the ISO Distributed Transaction Processing protocol. In the fourth paper, D Sherer, T Murer and A Würtz discuss the evolution of a cooperative software engineering infrastructure to a CORBA-based framework. The fifth paper, by R Fatoohi, evaluates the communication performance of a commercially-available Object Request Broker (Orbix from IONA Technologies) on several networks, and compares the performance with that of more traditional communication primitives (e.g., BSD UNIX sockets and PVM). We wish to thank both the referees and the authors of these papers, as their cooperation was fundamental in ensuring timely publication.

Coordinating complex decision support activities across distributed applications

NASA Technical Reports Server (NTRS)

Adler, Richard M.

1994-01-01

Knowledge-based technologies have been applied successfully to automate planning and scheduling in many problem domains. Automation of decision support can be increased further by integrating task-specific applications with supporting database systems, and by coordinating interactions between such tools to facilitate collaborative activities. Unfortunately, the technical obstacles that must be overcome to achieve this vision of transparent, cooperative problem-solving are daunting. Intelligent decision support tools are typically developed for standalone use, rely on incompatible, task-specific representational models and application programming interfaces (API's), and run on heterogeneous computing platforms. Getting such applications to interact freely calls for platform independent capabilities for distributed communication, as well as tools for mapping information across disparate representations. Symbiotics is developing a layered set of software tools (called NetWorks! for integrating and coordinating heterogeneous distributed applications. he top layer of tools consists of an extensible set of generic, programmable coordination services. Developers access these services via high-level API's to implement the desired interactions between distributed applications.

Satellite Docking Simulator with Generic Contact Dynamics Capabilities

NASA Astrophysics Data System (ADS)

Ma, O.; Crabtree, D.; Carr, R.; Gonthier, Y.; Martin, E.; Piedboeuf, J.-C.

2002-01-01

Satellite docking (and capture) systems are critical for the servicing or salvage of satellites. Satellite servicing has comparatively recently become a realistic and promising space operation/mission. Satellite servicing includes several of the following operations: rendezvous; docking (capturing); inspection; towing (transporting); refueling; refurbishing (replacement of faulty or "used-up" modules/boxes); and un-docking (releasing). Because spacecraft servicing has been, until recently non-feasible or non-economical, spacecraft servicing technology has been neglected. Accordingly, spacecraft designs have featured self- contained systems without consideration for operational servicing. Consistent with this view, most spacecrafts were designed and built without docking interfaces. If, through some mishap, a spacecraft was rendered non-operational, it was simply considered expendable. Several feasibility studies are in progress on salvaging stranded satellites (which, in fact had led to this project). The task of the designer of the docking system for a salvaging task is difficult. He/she has to work with whatever it is on orbit, and this excludes any special docking interfaces, which might have made his/her task easier. As satellite servicing becomes an accepted design requirement, many future satellites will be equipped with appropriate docking interfaces. The designer of docking systems will be faced with slightly different challenges: reliable, cost-effective, docking (and re-supply) systems. Thus, the role of designers of docking systems will increase from one of a kind, ad-hoc interfaces intended for salvaging operations, to docking systems for satellites and "caretaker" spacecraft which are meant for servicing and are produced in larger numbers. As in any space system (for which full and representative ground hardware test-beds are very expensive and often impossible to develop), simulations are mandatory for the development of systems and operations for satellite servicing. Simulations are also instrumental in concept studies during proposals and early development stages. Finally, simulations are useful during the operational phase of satellite servicing: improving the operational procedures; training ground operators; command and control, etc. Hence the need exists for a Satellite Servicing Simulator, which will support a project throughout its lifecycle. The paper addresses a project to develop a Simulink-based Satellite Docking Simulator (SDS) with generic Contact Dynamics (CD) capabilities. The simulator is intended to meet immediate practical demands for development of complex docking systems and operations at MD Robotics. The docking phase is the most critical and complex phase of the entire servicing sequence, and without docking there is no servicing. Docking mechanisms are often quite complex, especially when built to dock with a satellite manufactured without special docking interfaces. For successful docking operations, the design of a docking system must take into consideration: complexity of 3D geometric shapes defining the contact interfaces; sophistication of the docking mechanism; friction and stiction at the contacting surfaces; compliance (stiffness) and damping, in all axes; positional (translation and rotation) misalignments and relative velocities, in all axes; inertial properties of the docking satellites (including their distribution); complexity of the drive mechanisms and control sub-systems for the overall docking system; fully autonomous or tele-operated docking from the ground; etc. The docking simulator, which makes use of the proven Contact Dynamics Toolkit (CDT) developed by MD Robotics, is thus practically indispensable for the docking system designer. The use of the simulator could greatly reduce the prototyping and development time of a docking interface. A special feature of the simulator, which required an update of CDT, is variable step-size integration. This new capability permits increases in speed to accomplish all the simulation tasks.

Dynamics Govern Specificity of a Protein-Protein Interface: Substrate Recognition by Thrombin.

PubMed

Fuchs, Julian E; Huber, Roland G; Waldner, Birgit J; Kahler, Ursula; von Grafenstein, Susanne; Kramer, Christian; Liedl, Klaus R

2015-01-01

Biomolecular recognition is crucial in cellular signal transduction. Signaling is mediated through molecular interactions at protein-protein interfaces. Still, specificity and promiscuity of protein-protein interfaces cannot be explained using simplistic static binding models. Our study rationalizes specificity of the prototypic protein-protein interface between thrombin and its peptide substrates relying solely on binding site dynamics derived from molecular dynamics simulations. We find conformational selection and thus dynamic contributions to be a key player in biomolecular recognition. Arising entropic contributions complement chemical intuition primarily reflecting enthalpic interaction patterns. The paradigm "dynamics govern specificity" might provide direct guidance for the identification of specific anchor points in biomolecular recognition processes and structure-based drug design.

Service Learning for Engaged Work-Based Learning. Strategies for Transformative Change

ERIC Educational Resources Information Center

Hoffman, D.; Spada, K.; Fox, H. L.

2016-01-01

All 16 Wisconsin Technical College System (WTCS) colleges are committed to creating Intentional Networks Transforming Effective and Rigorous Facilitation of Assessment, Collaboration, and Education (INTERFACE). INTERFACE received a Round Three TAACCCT grant from the U.S. Department of Labor. INTERFACE is a strategic alignment between colleges,…

Study program for encapsulation materials interface for low-cost solar array

NASA Technical Reports Server (NTRS)

Kaelble, D. H.; Mansfeld, F. B.; Kendig, M.; Leung, C.

1981-01-01

The service integrity of the bonded interface in solar cell modules used in solar arrays is addressed. The development of AC impedance as a nondestructive evaluation (NDE) methodology for solar arrays is reported along with development of corrosion models and materials selection criteria for corrosion resistant interfaces.

Internet Medline providers.

PubMed

Vine, D L; Coady, T R

1998-01-01

Each database in this review has features that will appeal to some users. Each provides a credible interface to information available within the Medline database. The major differences are pricing and interface design. In this context, features that cost more and might seem trivial to the occasional searcher may actually save time and money when used by the professional. Internet Grateful Med is free, but Ms. Coady and I agree the availability of only three ANDable search fields is a major functional limitation. PubMed is also free but much more powerful. The command line interface that permits very sophisticated searches requires a commitment that casual users will find intimidating. Ms. Coady did not believe the feedback currently provided during a search was sufficient for sustained professional use. Paper Chase and Knowledge Finder are mature, modestly priced Medline search services. Paper Chase provides a menu-driven interface that is very easy to use, yet permits the user to search virtually all of Medline's data fields. Knowledge Finder emphasizes the use of natural language queries but fully supports more traditional search strategies. The impact of the tradeoff between fuzzy and Boolean strategies offered by Knowledge Finder is unclear and beyond the scope of this review. Additional software must be downloaded to use all of Knowledge Finders' features. Other providers required no software beyond the basic Internet browser, and this requirement prevented Ms. Coady from evaluating Knowledge Finder. Ovid and Silver Platter offer well-designed interfaces that simplify the construction of complex queries. These are clearly services designed for professional users. While pricing eliminates these for casual use, it should be emphasized that Medline citation access is only a portion of the service provided by these high-end vendors. Finally, we should comment that each of the vendors and government-sponsored services provided prompt and useful feedback to e-mail questions about usage. In conclusion, we would suggest you try the various services, determine which interface suits your style and budget, then perform simple searches until you learn the strengths and weaknesses of the service you select.

Launch Services Safety Overview

NASA Technical Reports Server (NTRS)

Loftin, Charles E.

2008-01-01

NASA/KSC Launch Services Division Safety (SA-D) services include: (1) Assessing the safety of the launch vehicle (2) Assessing the safety of NASA ELV spacecraft (S/C) / launch vehicle (LV) interfaces (3) Assessing the safety of spacecraft processing to ensure resource protection of: - KSC facilities - KSC VAFB facilities - KSC controlled property - Other NASA assets (4) NASA personnel safety (5) Interfacing with payload organizations to review spacecraft for adequate safety implementation and compliance for integrated activities (6) Assisting in the integration of safety activities between the payload, launch vehicle, and processing facilities

Brokered virtual hubs for facilitating access and use of geospatial Open Data

NASA Astrophysics Data System (ADS)

Mazzetti, Paolo; Latre, Miguel; Kamali, Nargess; Brumana, Raffaella; Braumann, Stefan; Nativi, Stefano

2016-04-01

Open Data is a major trend in current information technology scenario and it is often publicised as one of the pillars of the information society in the near future. In particular, geospatial Open Data have a huge potential also for Earth Sciences, through the enablement of innovative applications and services integrating heterogeneous information. However, open does not mean usable. As it was recognized at the very beginning of the Web revolution, many different degrees of openness exist: from simple sharing in a proprietary format to advanced sharing in standard formats and including semantic information. Therefore, to fully unleash the potential of geospatial Open Data, advanced infrastructures are needed to increase the data openness degree, enhancing their usability. In October 2014, the ENERGIC OD (European NEtwork for Redistributing Geospatial Information to user Communities - Open Data) project, funded by the European Union under the Competitiveness and Innovation framework Programme (CIP), has started. In response to the EU call, the general objective of the project is to "facilitate the use of open (freely available) geographic data from different sources for the creation of innovative applications and services through the creation of Virtual Hubs". The ENERGIC OD Virtual Hubs aim to facilitate the use of geospatial Open Data by lowering and possibly removing the main barriers which hampers geo-information (GI) usage by end-users and application developers. Data and services heterogeneity is recognized as one of the major barriers to Open Data (re-)use. It imposes end-users and developers to spend a lot of effort in accessing different infrastructures and harmonizing datasets. Such heterogeneity cannot be completely removed through the adoption of standard specifications for service interfaces, metadata and data models, since different infrastructures adopt different standards to answer to specific challenges and to address specific use-cases. Thus, beyond a certain extent, heterogeneity is irreducible especially in interdisciplinary contexts. ENERGIC OD Virtual Hubs address heterogeneity adopting a mediation and brokering approach: specific components (brokers) are dedicated to harmonize service interfaces, metadata and data models, enabling seamless discovery and access to heterogeneous infrastructures and datasets. As an innovation project, ENERGIC OD integrates several existing technologies to implement Virtual Hubs as single points of access to geospatial datasets provided by new or existing platforms and infrastructures, including INSPIRE-compliant systems and Copernicus services. A first version of the ENERGIC OD brokers has been implemented based on the GI-Suite Brokering Framework developed by CNR-IIA, and complemented with other tools under integration and development. It already enables mediated discovery and harmonized access to different geospatial Open Data sources. It is accessible by users as Software-as-a-Service through a browser. Moreover, open APIs and a Javascript library are available for application developers. Six ENERGIC OD Virtual Hubs have been currently deployed: one at regional level (Berlin metropolitan area) and five at national-level (in France, Germany, Italy, Poland and Spain). Each Virtual Hub manager decided the deployment strategy (local infrastructure or commercial Infrastructure-as-a-Service cloud), and the list of connected Open Data sources. The ENERGIC OD Virtual Hubs are under test and validation through the development of ten different mobile and Web applications.

GenePublisher: Automated analysis of DNA microarray data.

PubMed

Knudsen, Steen; Workman, Christopher; Sicheritz-Ponten, Thomas; Friis, Carsten

2003-07-01

GenePublisher, a system for automatic analysis of data from DNA microarray experiments, has been implemented with a web interface at http://www.cbs.dtu.dk/services/GenePublisher. Raw data are uploaded to the server together with a specification of the data. The server performs normalization, statistical analysis and visualization of the data. The results are run against databases of signal transduction pathways, metabolic pathways and promoter sequences in order to extract more information. The results of the entire analysis are summarized in report form and returned to the user.

VELOC - A new kind of information system

NASA Astrophysics Data System (ADS)

Dittloff, H. J.; Keuser, H.; Langer, H.

Based on the Global Positioning System (GPS), VELOC (Vehicle Location) is designed to be a vehicle information system for fleet management adaptable to various user groups, e.g., haulage and delivery companies, and service enterprises with vehicle fleets. The needs of these groups vary with respect to position accuracy, position update rate, and type of communication. The authors describe the requirements, specifications, and performance of VELOC. Special emphasis is placed on some substantial features of the VELOC center, namely the integration of DGPS, a comfortable user interface, and handling of vehicle positions on digital maps.

Open Science Grid (OSG) Ticket Synchronization: Keeping Your Home Field Advantage In A Distributed Environment

NASA Astrophysics Data System (ADS)

Gross, Kyle; Hayashi, Soichi; Teige, Scott; Quick, Robert

2012-12-01

Large distributed computing collaborations, such as the Worldwide LHC Computing Grid (WLCG), face many issues when it comes to providing a working grid environment for their users. One of these is exchanging tickets between various ticketing systems in use by grid collaborations. Ticket systems such as Footprints, RT, Remedy, and ServiceNow all have different schema that must be addressed in order to provide a reliable exchange of information between support entities and users in different grid environments. To combat this problem, OSG Operations has created a ticket synchronization interface called GOC-TX that relies on web services instead of error-prone email parsing methods of the past. Synchronizing tickets between different ticketing systems allows any user or support entity to work on a ticket in their home environment, thus providing a familiar and comfortable place to provide updates without having to learn another ticketing system. The interface is built in a way that it is generic enough that it can be customized for nearly any ticketing system with a web-service interface with only minor changes. This allows us to be flexible and rapidly bring new ticket synchronization online. Synchronization can be triggered by different methods including mail, web services interface, and active messaging. GOC-TX currently interfaces with Global Grid User Support (GGUS) for WLCG, Remedy at Brookhaven National Lab (BNL), and Request Tracker (RT) at the Virtual Data Toolkit (VDT). Work is progressing on the Fermi National Accelerator Laboratory (FNAL) ServiceNow synchronization. This paper will explain the problems faced by OSG and how they led OSG to create and implement this ticket synchronization system along with the technical details that allow synchronization to be preformed at a production level.

Marshall Space Flight Center Telescience Resource Kit

NASA Technical Reports Server (NTRS)

Wade, Gina

2016-01-01

Telescience Resource Kit (TReK) is a suite of software applications that can be used to monitor and control assets in space or on the ground. The Telescience Resource Kit was originally developed for the International Space Station program. Since then it has been used to support a variety of NASA programs and projects including the WB-57 Ascent Vehicle Experiment (WAVE) project, the Fast Affordable Science and Technology Satellite (FASTSAT) project, and the Constellation Program. The Payloads Operations Center (POC), also known as the Payload Operations Integration Center (POIC), provides the capability for payload users to operate their payloads at their home sites. In this environment, TReK provides local ground support system services and an interface to utilize remote services provided by the POC. TReK provides ground system services for local and remote payload user sites including International Partner sites, Telescience Support Centers, and U.S. Investigator sites in over 40 locations worldwide. General Capabilities: Support for various data interfaces such as User Datagram Protocol, Transmission Control Protocol, and Serial interfaces. Data Services - retrieve, process, record, playback, forward, and display data (ground based data or telemetry data). Command - create, modify, send, and track commands. Command Management - Configure one TReK system to serve as a command server/filter for other TReK systems. Database - databases are used to store telemetry and command definition information. Application Programming Interface (API) - ANSI C interface compatible with commercial products such as Visual C++, Visual Basic, LabVIEW, Borland C++, etc. The TReK API provides a bridge for users to develop software to access and extend TReK services. Environments - development, test, simulations, training, and flight. Includes standalone training simulators.

DockRank: Ranking docked conformations using partner-specific sequence homology-based protein interface prediction

PubMed Central

Xue, Li C.; Jordan, Rafael A.; EL-Manzalawy, Yasser; Dobbs, Drena; Honavar, Vasant

2015-01-01

Selecting near-native conformations from the immense number of conformations generated by docking programs remains a major challenge in molecular docking. We introduce DockRank, a novel approach to scoring docked conformations based on the degree to which the interface residues of the docked conformation match a set of predicted interface residues. Dock-Rank uses interface residues predicted by partner-specific sequence homology-based protein–protein interface predictor (PS-HomPPI), which predicts the interface residues of a query protein with a specific interaction partner. We compared the performance of DockRank with several state-of-the-art docking scoring functions using Success Rate (the percentage of cases that have at least one near-native conformation among the top m conformations) and Hit Rate (the percentage of near-native conformations that are included among the top m conformations). In cases where it is possible to obtain partner-specific (PS) interface predictions from PS-HomPPI, DockRank consistently outperforms both (i) ZRank and IRAD, two state-of-the-art energy-based scoring functions (improving Success Rate by up to 4-fold); and (ii) Variants of DockRank that use predicted interface residues obtained from several protein interface predictors that do not take into account the binding partner in making interface predictions (improving success rate by up to 39-fold). The latter result underscores the importance of using partner-specific interface residues in scoring docked conformations. We show that DockRank, when used to re-rank the conformations returned by ClusPro, improves upon the original ClusPro rankings in terms of both Success Rate and Hit Rate. DockRank is available as a server at http://einstein.cs.iastate.edu/DockRank/. PMID:23873600

DockRank: ranking docked conformations using partner-specific sequence homology-based protein interface prediction.

PubMed

Xue, Li C; Jordan, Rafael A; El-Manzalawy, Yasser; Dobbs, Drena; Honavar, Vasant

2014-02-01

Selecting near-native conformations from the immense number of conformations generated by docking programs remains a major challenge in molecular docking. We introduce DockRank, a novel approach to scoring docked conformations based on the degree to which the interface residues of the docked conformation match a set of predicted interface residues. DockRank uses interface residues predicted by partner-specific sequence homology-based protein-protein interface predictor (PS-HomPPI), which predicts the interface residues of a query protein with a specific interaction partner. We compared the performance of DockRank with several state-of-the-art docking scoring functions using Success Rate (the percentage of cases that have at least one near-native conformation among the top m conformations) and Hit Rate (the percentage of near-native conformations that are included among the top m conformations). In cases where it is possible to obtain partner-specific (PS) interface predictions from PS-HomPPI, DockRank consistently outperforms both (i) ZRank and IRAD, two state-of-the-art energy-based scoring functions (improving Success Rate by up to 4-fold); and (ii) Variants of DockRank that use predicted interface residues obtained from several protein interface predictors that do not take into account the binding partner in making interface predictions (improving success rate by up to 39-fold). The latter result underscores the importance of using partner-specific interface residues in scoring docked conformations. We show that DockRank, when used to re-rank the conformations returned by ClusPro, improves upon the original ClusPro rankings in terms of both Success Rate and Hit Rate. DockRank is available as a server at http://einstein.cs.iastate.edu/DockRank/. Copyright © 2013 Wiley Periodicals, Inc.

HomPPI: a class of sequence homology based protein-protein interface prediction methods

PubMed Central

2011-01-01

Background Although homology-based methods are among the most widely used methods for predicting the structure and function of proteins, the question as to whether interface sequence conservation can be effectively exploited in predicting protein-protein interfaces has been a subject of debate. Results We studied more than 300,000 pair-wise alignments of protein sequences from structurally characterized protein complexes, including both obligate and transient complexes. We identified sequence similarity criteria required for accurate homology-based inference of interface residues in a query protein sequence. Based on these analyses, we developed HomPPI, a class of sequence homology-based methods for predicting protein-protein interface residues. We present two variants of HomPPI: (i) NPS-HomPPI (Non partner-specific HomPPI), which can be used to predict interface residues of a query protein in the absence of knowledge of the interaction partner; and (ii) PS-HomPPI (Partner-specific HomPPI), which can be used to predict the interface residues of a query protein with a specific target protein. Our experiments on a benchmark dataset of obligate homodimeric complexes show that NPS-HomPPI can reliably predict protein-protein interface residues in a given protein, with an average correlation coefficient (CC) of 0.76, sensitivity of 0.83, and specificity of 0.78, when sequence homologs of the query protein can be reliably identified. NPS-HomPPI also reliably predicts the interface residues of intrinsically disordered proteins. Our experiments suggest that NPS-HomPPI is competitive with several state-of-the-art interface prediction servers including those that exploit the structure of the query proteins. The partner-specific classifier, PS-HomPPI can, on a large dataset of transient complexes, predict the interface residues of a query protein with a specific target, with a CC of 0.65, sensitivity of 0.69, and specificity of 0.70, when homologs of both the query and the target can be reliably identified. The HomPPI web server is available at http://homppi.cs.iastate.edu/. Conclusions Sequence homology-based methods offer a class of computationally efficient and reliable approaches for predicting the protein-protein interface residues that participate in either obligate or transient interactions. For query proteins involved in transient interactions, the reliability of interface residue prediction can be improved by exploiting knowledge of putative interaction partners. PMID:21682895

A DVE Time Management Simulation and Verification Platform Based on Causality Consistency Middleware

NASA Astrophysics Data System (ADS)

Zhou, Hangjun; Zhang, Wei; Peng, Yuxing; Li, Sikun

During the course of designing a time management algorithm for DVEs, the researchers always become inefficiency for the distraction from the realization of the trivial and fundamental details of simulation and verification. Therefore, a platform having realized theses details is desirable. However, this has not been achieved in any published work to our knowledge. In this paper, we are the first to design and realize a DVE time management simulation and verification platform providing exactly the same interfaces as those defined by the HLA Interface Specification. Moreover, our platform is based on a new designed causality consistency middleware and might offer the comparison of three kinds of time management services: CO, RO and TSO. The experimental results show that the implementation of the platform only costs small overhead, and that the efficient performance of it is highly effective for the researchers to merely focus on the improvement of designing algorithms.

Usability Evaluation of an Unstructured Clinical Document Query Tool for Researchers.

PubMed

Hultman, Gretchen; McEwan, Reed; Pakhomov, Serguei; Lindemann, Elizabeth; Skube, Steven; Melton, Genevieve B

2018-01-01

Natural Language Processing - Patient Information Extraction for Researchers (NLP-PIER) was developed for clinical researchers for self-service Natural Language Processing (NLP) queries with clinical notes. This study was to conduct a user-centered analysis with clinical researchers to gain insight into NLP-PIER's usability and to gain an understanding of the needs of clinical researchers when using an application for searching clinical notes. Clinical researcher participants (n=11) completed tasks using the system's two existing search interfaces and completed a set of surveys and an exit interview. Quantitative data including time on task, task completion rate, and survey responses were collected. Interviews were analyzed qualitatively. Survey scores, time on task and task completion proportions varied widely. Qualitative analysis indicated that participants found the system to be useful and usable in specific projects. This study identified several usability challenges and our findings will guide the improvement of NLP-PIER 's interfaces.

Mining Connected Data

NASA Astrophysics Data System (ADS)

Michel, L.; Motch, C.; Pineau, F. X.

2009-05-01

As members of the Survey Science Consortium of the XMM-Newton mission the Strasbourg Observatory is in charge of the real-time cross-correlations of X-ray data with archival catalogs. We also are committed to provide a specific tools to handle these cross-correlations and propose identifications at other wavelengths. In order to do so, we developed a database generator (Saada) managing persitent links and supporting heterogeneous input datasets. This system allows to easily build an archive containing numerous and complex links between individual items [1]. It also offers a powerfull query engine able to select sources on the basis of the properties (existence, distance, colours) of the X-ray-archival associations. We present such a database in operation for the 2XMMi catalogue. This system is flexible enough to provide both a public data interface and a servicing interface which could be used in the framework of the Simbol-X ground segment.

Impacts and Benefits of a Satellite Power System on the Electric Utility Industry

NASA Technical Reports Server (NTRS)

Winer, B. M.

1977-01-01

The purpose of this limited study was to investigate six specific issues associated with interfacing a Satellite Power System (5 GW) with large (by present standards) terrestrial power pools to a depth sufficient to determine if certain interface problems and/or benefits exist and what future studies of these problems are required. The issues investigated are as follows: (1) Stability of Power Pools Containing a 5 GWe SPS; (2) Extra Reserve Margin Required to Maintain the Reliability of Power Pools Containing a 5 GWe SPS; (3) Use of the SPS in Load Following Service (i.e. in two independent pools whose times of peak demand differ by three hours); (4) Ownership of the SPS and its effect on SPS Usage and Utility Costs; (5) Utility Sharing of SPS related RD and D Costs; (6) Utility Liability for SPS Related Hazards.

Instrument constraints and interface specifications. Earth Observatory Satellite system definition study (EOS)

NASA Technical Reports Server (NTRS)

1974-01-01

The equipment specifications for the thematic mapper and high resolution pointable imager for use on the Earth Observatory Satellite (EOS) are presented. The interface requirements of the systems are defined. The interface requirements are extracted from the equipment specifications and are intended as a summary to be used by the system and spacecraft designer. The appropriate documentation from which the specifications of the equipment are established are identified.

Information Viewpoints and Geoscience Service Architectures

NASA Astrophysics Data System (ADS)

Cox, S. J.

2007-12-01

When dealing with earth science data, different use-cases may require different views of the underlying information. At a basic level, data generation and initial assimilation generally involves dealing with event-based types and different granularity than data organized for processing, often on a grid, while further downstream the desired result of most scientific exercises is an interpretation view characterized by high semantic content and small size. The stages often map reasonably well onto the basic meta-models of Observation, Coverage and Feature provided by the OGC/ISO 19100 framework, and the matching service interfaces (SOS, WCS, WFS). However, on closer inspection of common use-cases, the vision of the Observation viewpoint as most primitive and the Feature viewpoint as most evolved does not consistently stand up. Furthermore, common discovery and access routes may involve traversing associations between instances using different viewpoints. These considerations lead to information (and thus service) composition arrangements with a variety of data flows. For example, an observation service may obtain its result data from a coverage service, while another coverage may be composed from multiple atomic observations; observations are often discovered through their association with a sampling-feature such as a cruise or borehole, or with a sensor platform such as a specific satellite whose description is available from a strongly governed register. The relationship of service instances to data stores (or other sources) is also not one-to-one, as multiple views of the same data are frequently involved. Useful service profiles may thus imply specific service architectures, and requirement to transform between viewpoints becomes almost ubiquitous. Adherence to a sound underlying meta-model for both data and services is a key enabler.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chao, Tian-Jy; Kim, Younghun

An end-to-end interoperability and workflows from building architecture design to one or more simulations, in one aspect, may comprise establishing a BIM enablement platform architecture. A data model defines data entities and entity relationships for enabling the interoperability and workflows. A data definition language may be implemented that defines and creates a table schema of a database associated with the data model. Data management services and/or application programming interfaces may be implemented for interacting with the data model. Web services may also be provided for interacting with the data model via the Web. A user interface may be implemented thatmore » communicates with users and uses the BIM enablement platform architecture, the data model, the data definition language, data management services and application programming interfaces to provide functions to the users to perform work related to building information management.« less

Comfort evaluation of a subject-specific seating interface formed by vibrating grains.

PubMed

Liu, Shenghui; Qu, Yunxia; Hou, Shujun; Li, Kai; Li, Xinye; Zhai, Yang; Ji, Yunxiao

2018-09-01

Sitting is the most common posture for work in offices, and spinal cord injury (SCI) patients who are wheelchair dependent spend 10.6 h per day seated in wheelchairs. Thus, the comfort of subject-specific interfaces is increasingly important for the well-being of patients and office workers. This paper introduces a new method of forming a subject-specific interface, based on vibrating grains. Twenty subjects (10 females and 10 males) participated in the sitting test. Interface comfort was evaluated using the pressure distribution and subjective rating methods. Five seating interface types were compared. The results showed that compared with a flat interface, the interfaces formed by vibrating grains had a significantly reduced peak contact pressure (PeakCP) (by more than 58.03%), and that PeakCP was highly correlated with the comfort rating (R = -0.533) and discomfort rating(R = -0.603). This new method shows promise for guiding the future development of customized seating interfaces. Copyright © 2018 Elsevier Ltd. All rights reserved.

Joint Service Aircrew Mask (JSAM) - Strategic Aircraft (SA): Noise Attenuation Performance

DTIC Science & Technology

2015-08-25

Billy Swayne Ball Aerospace and Technologies Corp. Dayton, OH Hilary Gallagher Warfighter Interface Division Battlespace Acoustics Branch...DISTRIBUTION STATEMENT. //signed// //signed// Hilary Gallagher Robert C. McKinley Work Unit Manager Chief, Battlespace Acoustics Branch...Battlespace Acoustics Branch Warfighter Interface Division //signed// William E. Russell, Chief Warfighter Interface Division Human

CCSDS Time-Critical Onboard Networking Service

NASA Technical Reports Server (NTRS)

Parkes, Steve; Schnurr, Rick; Marquart, Jane; Menke, Greg; Ciccone, Massimiliano

2006-01-01

The Consultative Committee for Space Data Systems (CCSDS) is developing recommendations for communication services onboard spacecraft. Today many different communication buses are used on spacecraft requiring software with the same basic functionality to be rewritten for each type of bus. This impacts on the application software resulting in custom software for almost every new mission. The Spacecraft Onboard Interface Services (SOIS) working group aims to provide a consistent interface to various onboard buses and sub-networks, enabling a common interface to the application software. The eventual goal is reusable software that can be easily ported to new missions and run on a range of onboard buses without substantial modification. The system engineer will then be able to select a bus based on its performance, power, etc and be confident that a particular choice of bus will not place excessive demands on software development. This paper describes the SOIS Intra-Networking Service which is designed to enable data transfer and multiplexing of a variety of internetworking protocols with a range of quality of service support, over underlying heterogeneous data links. The Intra-network service interface provides users with a common Quality of Service interface when transporting data across a variety of underlying data links. Supported Quality of Service (QoS) elements include: Priority, Resource Reservation and Retry/Redundancy. These three QoS elements combine and map into four TCONS services for onboard data communications: Best Effort, Assured, Reserved, and Guaranteed. Data to be transported is passed to the Intra-network service with a requested QoS. The requested QoS includes the type of service, priority and where appropriate, a channel identifier. The data is de-multiplexed, prioritized, and the required resources for transport are allocated. The data is then passed to the appropriate data link for transfer across the bus. The SOIS supported data links may inherently provide the quality of service support requested by the intra-network layer. In the case where the data link does not have the required level of support, the missing functionality is added by SOIS. As a result of this architecture, re-usable software applications can be designed and used across missions thereby promoting common mission operations. In addition, the protocol multiplexing function enables the blending of multiple onboard networks. This paper starts by giving an overview of the SOIS architecture in section 11, illustrating where the TCONS services fit into the overall architecture. It then describes the quality of service approach adopted, in section III. The prototyping efforts that have been going on are introduced in section JY. Finally, in section V the current status of the CCSDS recommendations is summarized.

Avatars and virtual agents – relationship interfaces for the elderly

PubMed Central

2017-01-01

In the Digital Era, the authors witness a change in the relationship between the patient and the care-giver or Health Maintenance Organization's providing the health services. Another fact is the use of various technologies to increase the effectiveness and quality of health services across all primary and secondary users. These technologies range from telemedicine systems, decision making tools, online and self-services applications and virtual agents; all providing information and assistance. The common thread between all these digital implementations, is they all require human machine interfaces. These interfaces must be interactive, user friendly and inviting, to create user involvement and cooperation incentives. The challenge is to design interfaces which will best fit the target users and enable smooth interaction especially, for the elderly users. Avatars and Virtual Agents are one of the interfaces used for both home care monitoring and companionship. They are also inherently multimodal in nature and allow an intimate relation between the elderly users and the Avatar. This study discusses the need and nature of these relationship models, the challenges of designing for the elderly. The study proposes key features for the design and evaluation in the area of assistive applications using Avatar and Virtual agents for the elderly users. PMID:28706725

Why Interfaces are the Key for Developing Climate Services

NASA Astrophysics Data System (ADS)

Cortekar, Jörg; Bender, Steffen; Groth, Markus

2015-04-01

Responding to climate change today involves both mitigation to address the cause and adaptation as a response to already on-going and expected changes. But to what exactly do we have to adapt? And what happens, when environmental, economical or administrative boundary conditions changes? In recent years the concept of climate services has evolved to provide user tailored information to meet individual adaptation needs. According to the Global Framework for Climate Services, climate services involve high-quality data e.g. on temperature, rainfall, wind, etc., as well as maps, risk and vulnerability analyses, assessments, and long-term projections and scenarios. Depending on specific user's needs, these data and information products may be combined with non-meteorological sector-specific data, such as agricultural production, flood risk maps or health trends, and other socio-economic variables to support decision-making of stakeholders who are affected by climate change. This, still non-exhaustive list already indicates that many different scientific disciplines are involved in the development and provision of climate services. Integrating different and equally important scientific approaches to contribute to the solution of one specific problem is challenging. In economics, for instance, many different and promising methods and tools such as cost-benefit-analyses are available which play a key role in providing policy makers and other stakeholders with data and information in order to create a robust decision-making basis for efficiently using scarce budgets. Cost-benefit-analysis is a well-established method in economic theory, its application in the field of climate change adaptation, however, is still new. The bulk of cost and benefit assessments currently pursues a top-down-approach. That is, the required data is generated by downscaling cost and benefit estimations of global impact assessment models to a specific region. In many cases global information are not fully capable to solve regional adaptation problems, since it does not account for the heterogeneous and highly context-dependent character of local conditions. Conducting a sound cost-benefit-analysis with respect to adaptation measures requires input from numerous disciplines. While cost estimations are mostly easily manageable, calculating benefits usually requires further input on different time and spatial scales. Depending on the object of interest this could be, for example, climatological, hydrological and environmental information. Of course, this is not specifically an economic issue. Practical examples such as for local water supply or from planning adaptation measures in urban areas clearly indicate that overcoming disciplinary borders is always challenging. Even though the integration of different scientific disciplines is progressing, there is still no how-to guideline and it can be doubted there will be one some day. Lessons learnt show that upcoming questions must be solved on a case-to-case basis. This means the interfaces between disciplines must be identified and designed with respect to the existing context and participating stakeholders, which requires much effort, a local multiplier and the willingness of all participating partners to find adequate solutions.

A decision framework for identifying models to estimate forest ecosystem services gains from restoration

USGS Publications Warehouse

Christin, Zachary; Bagstad, Kenneth J.; Verdone, Michael

2016-01-01

Restoring degraded forests and agricultural lands has become a global conservation priority. A growing number of tools can quantify ecosystem service tradeoffs associated with forest restoration. This evolving “tools landscape” presents a dilemma: more tools are available, but selecting appropriate tools has become more challenging. We present a Restoration Ecosystem Service Tool Selector (RESTS) framework that describes key characteristics of 13 ecosystem service assessment tools. Analysts enter information about their decision context, services to be analyzed, and desired outputs. Tools are filtered and presented based on five evaluative criteria: scalability, cost, time requirements, handling of uncertainty, and applicability to benefit-cost analysis. RESTS uses a spreadsheet interface but a web-based interface is planned. Given the rapid evolution of ecosystem services science, RESTS provides an adaptable framework to guide forest restoration decision makers toward tools that can help quantify ecosystem services in support of restoration.

A Neuroimaging Web Services Interface as a Cyber Physical System for Medical Imaging and Data Management in Brain Research: Design Study

PubMed Central

2018-01-01

Background Structural and functional brain images are essential imaging modalities for medical experts to study brain anatomy. These images are typically visually inspected by experts. To analyze images without any bias, they must be first converted to numeric values. Many software packages are available to process the images, but they are complex and difficult to use. The software packages are also hardware intensive. The results obtained after processing vary depending on the native operating system used and its associated software libraries; data processed in one system cannot typically be combined with data on another system. Objective The aim of this study was to fulfill the neuroimaging community’s need for a common platform to store, process, explore, and visualize their neuroimaging data and results using Neuroimaging Web Services Interface: a series of processing pipelines designed as a cyber physical system for neuroimaging and clinical data in brain research. Methods Neuroimaging Web Services Interface accepts magnetic resonance imaging, positron emission tomography, diffusion tensor imaging, and functional magnetic resonance imaging. These images are processed using existing and custom software packages. The output is then stored as image files, tabulated files, and MySQL tables. The system, made up of a series of interconnected servers, is password-protected and is securely accessible through a Web interface and allows (1) visualization of results and (2) downloading of tabulated data. Results All results were obtained using our processing servers in order to maintain data validity and consistency. The design is responsive and scalable. The processing pipeline started from a FreeSurfer reconstruction of Structural magnetic resonance imaging images. The FreeSurfer and regional standardized uptake value ratio calculations were validated using Alzheimer’s Disease Neuroimaging Initiative input images, and the results were posted at the Laboratory of Neuro Imaging data archive. Notable leading researchers in the field of Alzheimer’s Disease and epilepsy have used the interface to access and process the data and visualize the results. Tabulated results with unique visualization mechanisms help guide more informed diagnosis and expert rating, providing a truly unique multimodal imaging platform that combines magnetic resonance imaging, positron emission tomography, diffusion tensor imaging, and resting state functional magnetic resonance imaging. A quality control component was reinforced through expert visual rating involving at least 2 experts. Conclusions To our knowledge, there is no validated Web-based system offering all the services that Neuroimaging Web Services Interface offers. The intent of Neuroimaging Web Services Interface is to create a tool for clinicians and researchers with keen interest on multimodal neuroimaging. More importantly, Neuroimaging Web Services Interface significantly augments the Alzheimer’s Disease Neuroimaging Initiative data, especially since our data contain a large cohort of Hispanic normal controls and Alzheimer’s Disease patients. The obtained results could be scrutinized visually or through the tabulated forms, informing researchers on subtle changes that characterize the different stages of the disease. PMID:29699962

Datalist: A Value Added Service to Enable Easy Data Selection

NASA Technical Reports Server (NTRS)

Li, Angela; Hegde, Mahabaleshwa; Bryant, Keith; Seiler, Edward; Shie, Chung-Lin; Teng, William; Liu, Zhong; Hearty, Thomas; Shen, Suhung; Kempler, Steven;

Orbital Maneuvering Vehicle (OMV) remote servicing kit

NASA Technical Reports Server (NTRS)

Brown, Norman S.

1988-01-01

With the design and development of the Orbital Maneuvering Vehicle (OMV) progressing toward an early 1990 initial operating capability (IOC), a new era in remote space operations will evolve. The logical progression to OMV front end kits would make available in situ satellite servicing, repair, and consummables resupply to the satellite community. Several conceptual design study efforts are defining representative kits (propellant tanks, debris recovery, module servicers); additional focus must also be placed on an efficient combination module servicer and consummables resupply kit. A remote servicer kit of this type would be designed to perform many of the early maintenance/resupply tasks in both nominal and high inclination orbits. The kit would have the capability to exchange Orbital Replacement Units (ORUs), exchange propellant tanks, and/or connect fluid transfer umbilicals. Necessary transportation system functions/support could be provided by interfaces with the OMV, Shuttle (STS), or Expendable Launch Vehicle (ELV). Specific remote servicer kit designs, as well as ground and flight demonstrations of servicer technology are necessary to prepare for the potential overwhelming need. Ground test plans should adhere to the component/system/breadboard test philosophy to assure maximum capability of one-g testing. The flight demonstration(s) would most likely be a short duration, Shuttle-bay experiment to validate servicer components requiring a micro-g environment.

The OGC Publish/Subscribe specification in the context of sensor-based applications

NASA Astrophysics Data System (ADS)

Bigagli, Lorenzo

2014-05-01

The Open Geospatial Consortium Publish/Subscribe Standards Working Group (in short, OGC PubSub SWG) was chartered in 2010 to specify a mechanism to support publish/subscribe requirements across OGC service interfaces and data types (coverage, feature, etc.) The Publish/Subscribe Interface Standard 1.0 - Core (13-131) defines an abstract description of the basic mandatory functionality, along with several optional, extended capabilities. The Core is independent of the underlying binding, for which two extensions are currently considered in the PubSub SWG scope: a SOAP binding and RESTful binding. Two primary parties characterize the publish/subscribe model: a Publisher, which is publishing information, and a Subscriber, which expresses an interest in all or part of the published information. In many cases, the Subscriber and the entity to which data is to be delivered (the Receiver) are one and the same. However, they are distinguished in PubSub to allow for these roles to be segregated. This is useful, for example, in event-based systems, where system entities primarily react to incoming information and may emit new information to other interested entities. The Publish/Subscribe model is distinguished from the typical request/response model, where a client makes a request and the server responds with either the requested information or a failure. This provides relatively immediate feedback, but can be insufficient in cases where the client is waiting for a specific event (such as data arrival, server changes, or data updates). In fact, while waiting for an event, a client must repeatedly request the desired information (polling). This has undesirable side effects: if a client polls frequently this can increase server load and network traffic, and if a client polls infrequently it may not receive a message when it is needed. These issues are accentuated when event occurrences are unpredictable, or when the delay between event occurrence and client notification must be small. Instead, the Publish/Subscribe model is characterized by the ability for a Subscriber to specify an ongoing (persistent) expression of interest in some messages, and by the asynchronous delivery of such messages. Hence, the publish/subscribe model can be useful to reduce the latency between event occurrence and event notification, as it is the Publisher's responsibility to publish a message when the event occurs, rather than relying on clients to anticipate the occurrence. The following cross-service requirements have been identified for PubSub 1.0: • Provide notification capabilities as a module to existing OGC services with no impact on existing service semantics and by reusing service-specific filtering semantics. • Usable as a way to push actual data (not only references to data) from a data access service (i.e. WCS, WFS, SOS) to the client. • Usable as a way to push notification messages (i.e. lightweight, no data but rather references to data) to the client. • Usable as a way to provide notifications of service and dataset updates in order to simplify/optimize harvesting by catalogs. The use-cases identified for PubSub 1.0 include: • Service Filtered Data Push. • Service Filtered Notification. • Notification of Threshold Crossings. • FAA SAA Dissemination Pilot. • Emergency / Safety Critical Application. The above suggests that the OGC Publish/Subscribe specification could be successfully applied to sensor-based monitoring. This work elaborates on this technology and its possible applications in this context.

Simulation of the human-telerobot interface

NASA Technical Reports Server (NTRS)

Stuart, Mark A.; Smith, Randy L.

1988-01-01

A part of NASA's Space Station will be a Flight Telerobotic Servicer (FTS) used to help assemble, service, and maintain the Space Station. Since the human operator will be required to control the FTS, the design of the human-telerobot interface must be optimized from a human factors perspective. Simulation has been used as an aid in the development of complex systems. Simulation has been especially useful when it has been applied to the development of complex systems. Simulation should ensure that the hardware and software components of the human-telerobot interface have been designed and selected so that the operator's capabilities and limitations have been accommodated for since this is a complex system where few direct comparisons to existent systems can be made. Three broad areas of the human-telerobot interface where simulation can be of assistance are described. The use of simulation not only can result in a well-designed human-telerobot interface, but also can be used to ensure that components have been selected to best meet system's goals, and for operator training.

Service equipment for use in hostile environments

NASA Technical Reports Server (NTRS)

Dolce, James L. (Inventor); Gordon, Andrew L. (Inventor)

1994-01-01

Service equipment for use in hostile environments includes a detachable service unit secured to a stationary service unit. The detachable service unit includes a housing with an exterior plate, a power control interface for connection to an exterior power source, locating pins located in said exterior plate, an electrical connector in the exterior plate electrically coupled to said power control interface, and a pair of clamping receptacles formed in the exterior plate and located on adjacent opposite edges of the exterior plate. The stationary unit includes an electrical connector for connection to the electrical connector of the detachable service unit, a clamping apparatus for clamping and unclamping the detachable service unit from the stationary unit, a base clamp assembly for mounting the clamping apparatus onto the stationary unit, and locating pin holes for receiving the locating pins and aligning the detachable service unit onto the stationary unit. The detachable service unit and stationary unit have mating scalloped faces which aid in alignment and provide a mechanism for heat dissipation.

UUI: Reusable Spatial Data Services in Unified User Interface at NASA GES DISC

NASA Technical Reports Server (NTRS)

Petrenko, Maksym; Hegde, Mahabaleshwa; Bryant, Keith; Pham, Long B.

2016-01-01

Unified User Interface (UUI) is a next-generation operational data access tool that has been developed at Goddard Earth Sciences Data and Information Services Center(GES DISC) to provide a simple, unified, and intuitive one-stop shop experience for the key data services available at GES DISC, including subsetting (Simple Subset Wizard -SSW), granule file search (Mirador), plotting (Giovanni), and other legacy spatial data services. UUI has been built based on a flexible infrastructure of reusable web services self-contained building blocks that can easily be plugged into spatial applications, including third-party clients or services, to easily enable new functionality as new datasets and services become available. In this presentation, we will discuss our experience in designing UUI services based on open industry standards. We will also explain how the resulting framework can be used for a rapid development, deployment, and integration of spatial data services, facilitating efficient access and dissemination of spatial data sets.

Tools for Integrating Data Access from the IRIS DMC into Research Workflows

NASA Astrophysics Data System (ADS)

Reyes, C. G.; Suleiman, Y. Y.; Trabant, C.; Karstens, R.; Weertman, B. R.

2012-12-01

Web service interfaces at the IRIS Data Management Center (DMC) provide access to a vast archive of seismological and related geophysical data. These interfaces are designed to easily incorporate data access into data processing workflows. Examples of data that may be accessed include: time series data, related metadata, and earthquake information. The DMC has developed command line scripts, MATLAB® interfaces and a Java library to support a wide variety of data access needs. Users of these interfaces do not need to concern themselves with web service details, networking, or even (in most cases) data conversion. Fetch scripts allow access to the DMC archive and are a comfortable fit for command line users. These scripts are written in Perl and are well suited for automation and integration into existing workflows on most operating systems. For metdata and event information, the Fetch scripts even parse the returned data into simple text summaries. The IRIS Java Web Services Library (IRIS-WS Library) allows Java developers the ability to create programs that access the DMC archives seamlessly. By returning the data and information as native Java objects the Library insulates the developer from data formats, network programming and web service details. The MATLAB interfaces leverage this library to allow users access to the DMC archive directly from within MATLAB (r2009b or newer), returning data into variables for immediate use. Data users and research groups are developing other toolkits that use the DMC's web services. Notably, the ObsPy framework developed at LMU Munich is a Python Toolbox that allows seamless access to data and information via the DMC services. Another example is the MATLAB-based GISMO and Waveform Suite developments that can now access data via web services. In summary, there now exist a host of ways that researchers can bring IRIS DMC data directly into their workflows. MATLAB users can use irisFetch.m, command line users can use the various Fetch scripts, Java users can use the IRIS-WS library, and Python users may request data through ObsPy. To learn more about any of these clients see http://www.iris.edu/ws/wsclients/.

cPath: open source software for collecting, storing, and querying biological pathways.

PubMed

Cerami, Ethan G; Bader, Gary D; Gross, Benjamin E; Sander, Chris

2006-11-13

Biological pathways, including metabolic pathways, protein interaction networks, signal transduction pathways, and gene regulatory networks, are currently represented in over 220 diverse databases. These data are crucial for the study of specific biological processes, including human diseases. Standard exchange formats for pathway information, such as BioPAX, CellML, SBML and PSI-MI, enable convenient collection of this data for biological research, but mechanisms for common storage and communication are required. We have developed cPath, an open source database and web application for collecting, storing, and querying biological pathway data. cPath makes it easy to aggregate custom pathway data sets available in standard exchange formats from multiple databases, present pathway data to biologists via a customizable web interface, and export pathway data via a web service to third-party software, such as Cytoscape, for visualization and analysis. cPath is software only, and does not include new pathway information. Key features include: a built-in identifier mapping service for linking identical interactors and linking to external resources; built-in support for PSI-MI and BioPAX standard pathway exchange formats; a web service interface for searching and retrieving pathway data sets; and thorough documentation. The cPath software is freely available under the LGPL open source license for academic and commercial use. cPath is a robust, scalable, modular, professional-grade software platform for collecting, storing, and querying biological pathways. It can serve as the core data handling component in information systems for pathway visualization, analysis and modeling.

Land User and Land Cover Maps of Europe: a Webgis Platform

NASA Astrophysics Data System (ADS)

Brovelli, M. A.; Fahl, F. C.; Minghini, M.; Molinari, M. E.

2016-06-01

This paper presents the methods and implementation processes of a WebGIS platform designed to publish the available land use and land cover maps of Europe at continental scale. The system is built completely on open source infrastructure and open standards. The proposed architecture is based on a server-client model having GeoServer as the map server, Leaflet as the client-side mapping library and the Bootstrap framework at the core of the front-end user interface. The web user interface is designed to have typical features of a desktop GIS (e.g. activate/deactivate layers and order layers by drag and drop actions) and to show specific information on the activated layers (e.g. legend and simplified metadata). Users have the possibility to change the base map from a given list of map providers (e.g. OpenStreetMap and Microsoft Bing) and to control the opacity of each layer to facilitate the comparison with both other land cover layers and the underlying base map. In addition, users can add to the platform any custom layer available through a Web Map Service (WMS) and activate the visualization of photos from popular photo sharing services. This last functionality is provided in order to have a visual assessment of the available land coverages based on other user-generated contents available on the Internet. It is supposed to be a first step towards a calibration/validation service that will be made available in the future.

Health care reform and care at the behavioral health--primary care interface.

PubMed

Druss, Benjamin G; Mauer, Barbara J

2010-11-01

The historic passage of the Patient Protection and Affordable Care Act in March 2010 offers the potential to address long-standing deficits in quality and integration of services at the interface between behavioral health and primary care. Many of the efforts to reform the care delivery system will come in the form of demonstration projects, which, if successful, will become models for the broader health system. This article reviews two of the programs that might have a particular impact on care on the two sides of that interface: Medicaid and Medicare patient-centered medical home demonstration projects and expansion of a Substance Abuse and Mental Health Services Administration program that colocates primary care services in community mental health settings. The authors provide an overview of key supporting factors, including new financing mechanisms, quality assessment metrics, information technology infrastructure, and technical support, that will be important for ensuring that initiatives achieve their potential for improving care.

End-to-end interoperability and workflows from building architecture design to one or more simulations

DOEpatents

Chao, Tian-Jy; Kim, Younghun

2015-02-10

An end-to-end interoperability and workflows from building architecture design to one or more simulations, in one aspect, may comprise establishing a BIM enablement platform architecture. A data model defines data entities and entity relationships for enabling the interoperability and workflows. A data definition language may be implemented that defines and creates a table schema of a database associated with the data model. Data management services and/or application programming interfaces may be implemented for interacting with the data model. Web services may also be provided for interacting with the data model via the Web. A user interface may be implemented that communicates with users and uses the BIM enablement platform architecture, the data model, the data definition language, data management services and application programming interfaces to provide functions to the users to perform work related to building information management.

Implementing a DICOM-HL7 interface application

NASA Astrophysics Data System (ADS)

Fritz, Steven L.; Munjal, Sunita; Connors, James; Csipo, Deszu

1995-05-01

The DICOM standard, in addition to resolving certain problems with the ACR-NEMA 2.0 standard regarding network support and the clinical data dictionary, added new capabilities, in the form of study content notification and patient, study and results management services, intended to assist in interfacing between PACS and HIS or RIS systems. We have defined and implemented a mechanism that allows a DICOM application entity (AE) to interrogate an HL7 based RIS using DICOM services. The implementation involved development of a DICOM- HL7 gateway which converted between DICOM and HL7 messages to achieve the desired retrieval capability. This mechanism, based on the DICOM query/retrieve service, was used to interface a DeJarnette Research film digitizer to an IDXrad RIS at the University of Maryland Medical Systems hospital in Baltimore, Maryland. A C++ class library was developed for both DICOM and HL7 massaging, with several constructors used to convert between the two standards.

CAD Services: an Industry Standard Interface for Mechanical CAD Interoperability

NASA Technical Reports Server (NTRS)

Claus, Russell; Weitzer, Ilan

2002-01-01

Most organizations seek to design and develop new products in increasingly shorter time periods. At the same time, increased performance demands require a team-based multidisciplinary design process that may span several organizations. One approach to meet these demands is to use 'Geometry Centric' design. In this approach, design engineers team their efforts through one united representation of the design that is usually captured in a CAD system. Standards-based interfaces are critical to provide uniform, simple, distributed services that enable the 'Geometry Centric' design approach. This paper describes an industry-wide effort, under the Object Management Group's (OMG) Manufacturing Domain Task Force, to define interfaces that enable the interoperability of CAD, Computer Aided Manufacturing (CAM), and Computer Aided Engineering (CAE) tools. This critical link to enable 'Geometry Centric' design is called: Cad Services V1.0. This paper discusses the features of this standard and proposed application.

GENESI-DR Portal: a scientific gateway to distributed repositories

NASA Astrophysics Data System (ADS)

Goncalves, Pedro; Brito, Fabrice; D'Andria, Fabio; Cossu, Roberto; Fusco, Luigi

2010-05-01

GENESI-DR (Ground European Network for Earth Science Interoperations - Digital Repositories) is a European Commission (EC)-funded project, kicked-off early 2008 lead by ESA; partners include Space Agencies (DLR, ASI, CNES), both space and no-space data providers such as ENEA (I), Infoterra (UK), K-SAT (N), NILU (N), JRC (EU) and industry as Elsag Datamat (I), CS (F) and TERRADUE (I). GENESI-DR intends to meet the challenge of facilitating "time to science" from different Earth Science disciplines in discovery, access and use (combining, integrating, processing, …) of historical and recent Earth-related data from space, airborne and in-situ sensors, which are archived in large distributed repositories. "Discovering" which data are available on a "geospatial web" is one of the main challenges ES scientists have to face today. Some well- known data sets are referred to in many places, available from many sources. For core information with a common purpose many copies are distributed, e.g., VMap0, Landsat, and SRTM. Other data sets in low or local demand may only be found in a few places and niche communities. Relevant services, results of analysis, applications and tools are accessible in a very scattered and uncoordinated way, often through individual initiatives from Earth Observation mission operators, scientific institutes dealing with ground measurements, service companies or data catalogues. In the discourse of Spatial Data Infrastructures, there are "catalogue services" - directories containing information on where spatial data and services can be found. For metadata "records" describing spatial data and services, there are "registries". The Geospatial industry coins specifications for search interfaces, where it might do better to reach out to other information retrieval and Internet communities. These considerations are the basis for the GENESI-DR scientific portal, which adopts a simple model allowing the geo-spatial classification and discovery of information as a loosely connected federation of nodes. This network had however to be resilient to node failures and able to scale with the growing addition of new information about data and services. The GENESI-DR scientific portal is still evolving as the project deploys the different components amongst the different partners, but the aim is to provide the connection to information, establish rights, access it and in some cases apply algorithms using the computer power available on the infrastructure with simple interfaces. As information is discovered in the network, it can be further exploited, filtered or enhanced according to the user goals. To implement this vision two specialized graphical interfaces were designed on the portal. The first, concentrates on the text-based search of information, while the second is a command and control of submission and order status on a distributed processing environment. The text search uses natural language features that extract the spatial temporal components from the user query. This is then propagated to the nodes by mapping them to OpenSearch extensions, and then returned to the user as an aggregated list of the resources. These can either be access points to dataset series or services that can be further analysed and processed. At this stage, the user is presented with dedicated interfaces that correspond to context of the action that is performing. Be it a bulk data download, data processing or data mining, the different services offer specialized interfaces that are integrated on the portal. In the overall, the GENESI-DR project identifies best practices and supporting context for the use of a minimal abstract model to loosely connect a federation of Digital Repositories. Surpassing the apparent lack of cost effectiveness of the Spatial Data Infrastructures effort in developing "catalogue services" is achieved by trimming the use cases to the most common and relevant. The GENESI-DR scientific portal is, as such, the visible front-end of a dedicated infrastructure providing transparent access to information and allowing Earth Science communities to easily and quickly derive objective information and share knowledge based on all environmentally sensitive domains.

A SOA-Based Solution to Monitor Vaccination Coverage Among HIV-Infected Patients in Liguria.

PubMed

Giannini, Barbara; Gazzarata, Roberta; Sticchi, Laura; Giacomini, Mauro

2016-01-01

Vaccination in HIV-infected patients constitutes an essential tool in the prevention of the most common infectious diseases. The Ligurian Vaccination in HIV Program is a proposed vaccination schedule specifically dedicated to this risk group. Selective strategies are proposed within this program, employing ICT (Information and Communication) tools to identify this susceptible target group, to monitor immunization coverage over time and to manage failures and defaulting. The proposal is to connect an immunization registry system to an existing regional platform that allows clinical data re-use among several medical structures, to completely manage the vaccination process. This architecture will adopt a Service Oriented Architecture (SOA) approach and standard HSSP (Health Services Specification Program) interfaces to support interoperability. According to the presented solution, vaccination administration information retrieved from the immunization registry will be structured according to the specifications within the immunization section of the HL7 (Health Level 7) CCD (Continuity of Care Document) document. Immunization coverage will be evaluated through the continuous monitoring of serology and antibody titers gathered from the hospital LIS (Laboratory Information System) structured into a HL7 Version 3 (v3) Clinical Document Architecture Release 2 (CDA R2).

Adapting the CUAHSI Hydrologic Information System to OGC standards

NASA Astrophysics Data System (ADS)

Valentine, D. W.; Whitenack, T.; Zaslavsky, I.

2010-12-01

The CUAHSI Hydrologic Information System (HIS) provides web and desktop client access to hydrologic observations via water data web services using an XML schema called “WaterML”. The WaterML 1.x specification and the corresponding Water Data Services have been the backbone of the HIS service-oriented architecture (SOA) and have been adopted for serving hydrologic data by several federal agencies and many academic groups. The central discovery service, HIS Central, is based on an metadata catalog that references 4.7 billion observations, organized as 23 million data series from 1.5 million sites from 51 organizations. Observations data are published using HydroServer nodes that have been deployed at 18 organizations. Usage of HIS has increased by 8x from 2008 to 2010, and doubled in usage from 1600 data series a day in 2009 to 3600 data series a day in the first half of 2010. The HIS central metadata catalog currently harvests information from 56 Water Data Services. We collaborate on the catalog updates with two federal partners, USGS and US EPA: their data series are periodically reloaded into the HIS metadata catalog. We are pursuing two main development directions in the HIS project: Cloud-based computing, and further compliance with Open Geospatial Consortium (OGC) standards. The goal of moving to cloud-computing is to provide a scalable collaborative system with a simpler deployment and less dependence of hardware maintenance and staff. This move requires re-architecting the information models underlying the metadata catalog, and Water Data Services to be independent of the underlying relational database model, allowing for implementation on both relational databases, and cloud-based processing systems. Cloud-based HIS central resources can be managed collaboratively; partners share responsibility for their metadata by publishing data series information into the centralized catalog. Publishing data series will use REST-based service interfaces, like OData, as the basis for ingesting data series information into a cloud-hosted catalog. The future HIS services involve providing information via OGC Standards that will allow for observational data access from commercial GIS applications. Use of standards will allow for tools to access observational data from other projects using standards, such as the Ocean Observatories Initiative, and for tools from such projects to be integrated into the HIS toolset. With international collaborators, we have been developing a water information exchange language called “WaterML 2.0” which will be used to deliver observations data over OGC Sensor Observation Services (SOS). A software stack of OGC standard services will provide access to HIS information. In addition to SOS, Web Mapping and Feature Services (WMS, and WFS) will provide access to location information. Catalog Services for the Web (CSW) will provide a catalog for water information that is both centralized, and distributed. We intend the OGC standards supplement the existing HIS service interfaces, rather than replace the present service interfaces. The ultimate goal of this development is expand access to hydrologic observations data, and create an environment where these data can be seamlessly integrated with standards-compliant data resources.

Beyond qualitative and subjective techniques to assess usability of banking interfaces for senior citizens.

PubMed

Laparra-Hernández, José; Medina, Enric; Sancho, María; Soriano, Carolina; Durá, Juanvi; Barberà-Guillem, Ricard; Poveda-Puente, Rakel

2015-01-01

Senior citizens can benefit from banking services but the lack of usability hampers this possibility. New approaches based on physiological response, eye tracking and user movement analysis can provide more information during interface interaction. This research shows the differences depending on user knowledge and use of technology, gender and type of interface.

GIANT API: an application programming interface for functional genomics

PubMed Central

Roberts, Andrew M.; Wong, Aaron K.; Fisk, Ian; Troyanskaya, Olga G.

2016-01-01

GIANT API provides biomedical researchers programmatic access to tissue-specific and global networks in humans and model organisms, and associated tools, which includes functional re-prioritization of existing genome-wide association study (GWAS) data. Using tissue-specific interaction networks, researchers are able to predict relationships between genes specific to a tissue or cell lineage, identify the changing roles of genes across tissues and uncover disease-gene associations. Additionally, GIANT API enables computational tools like NetWAS, which leverages tissue-specific networks for re-prioritization of GWAS results. The web services covered by the API include 144 tissue-specific functional gene networks in human, global functional networks for human and six common model organisms and the NetWAS method. GIANT API conforms to the REST architecture, which makes it stateless, cacheable and highly scalable. It can be used by a diverse range of clients including web browsers, command terminals, programming languages and standalone apps for data analysis and visualization. The API is freely available for use at http://giant-api.princeton.edu. PMID:27098035

Interoperability through standardization: Electronic mail, and X Window systems

NASA Technical Reports Server (NTRS)

Amin, Ashok T.

1993-01-01

Since the introduction of computing machines, there has been continual advances in computer and communication technologies and approaching limits. The user interface has evolved from a row of switches, character based interface using teletype terminals and then video terminals, to present day graphical user interface. It is expected that next significant advances will come in the availability of services, such as electronic mail and directory services, as the standards for applications are developed and in the 'easy to use' interfaces, such as Graphical User Interface for example Window and X Window, which are being standardized. Various proprietary electronic mail (email) systems are in use within organizations at each center of NASA. Each system provides email services to users within an organization, however the support for email services across organizations and across centers exists at centers to a varying degree and is often easy to use. A recent NASA email initiative is intended 'to provide a simple way to send email across organizational boundaries without disruption of installed base.' The initiative calls for integration of existing organizational email systems through gateways connected by a message switch, supporting X.400 and SMTP protocols, to create a NASA wide email system and for implementation of NASA wide email directory services based on OSI standard X.500. A brief overview of MSFC efforts as a part of this initiative are described. Window based graphical user interfaces make computers easy to use. X window protocol has been developed at Massachusetts Institute of Technology in 1984/1985 to provide uniform window based interface in a distributed computing environment with heterogenous computers. It has since become a standard supported by a number of major manufacturers. Z Windows systems, terminals and workstations, and X Window applications are becoming available. However impact of its use in the Local Area Network environment on the network traffic are not well understood. It is expected that the use of X Windows systems will increase at MSFC especially for Unix based systems. An overview of X Window protocol is presented and its impact on the network traffic is examined. It is proposed that an analytical model of X Window systems in the network environment be developed and validated through the use of measurements to generate application and user profiles.

An Overview of Recent Patents on Musculoskeletal Interface Tissue Engineering

PubMed Central

Rao, Rohit T.; Browe, Daniel P.; Lowe, Christopher J.; Freeman, Joseph W.

2018-01-01

Interface tissue engineering involves the development of engineered grafts that promote integration between multiple tissue types. Musculoskeletal tissue interfaces are critical to the safe and efficient transmission of mechanical forces between multiple musculoskeletal tissues e.g. between ligament and bone tissue. However, these interfaces often do not physiologically regenerate upon injury, resulting in impaired tissue function. Therefore, interface tissue engineering approaches are considered to be particularly relevant for the structural restoration of musculoskeletal tissues interfaces. In this article we provide an overview of the various strategies used for engineering musculoskeletal tissue interfaces with a specific focus on the recent important patents that have been issued for inventions that were specifically designed for engineering musculoskeletal interfaces as well as those that show promise to be adapted for this purpose. PMID:26577344

A Lifecycle Approach to Brokered Data Management for Hydrologic Modeling Data Using Open Standards.

NASA Astrophysics Data System (ADS)

Blodgett, D. L.; Booth, N.; Kunicki, T.; Walker, J.

2012-12-01

The U.S. Geological Survey Center for Integrated Data Analytics has formalized an information management-architecture to facilitate hydrologic modeling and subsequent decision support throughout a project's lifecycle. The architecture is based on open standards and open source software to decrease the adoption barrier and to build on existing, community supported software. The components of this system have been developed and evaluated to support data management activities of the interagency Great Lakes Restoration Initiative, Department of Interior's Climate Science Centers and WaterSmart National Water Census. Much of the research and development of this system has been in cooperation with international interoperability experiments conducted within the Open Geospatial Consortium. Community-developed standards and software, implemented to meet the unique requirements of specific disciplines, are used as a system of interoperable, discipline specific, data types and interfaces. This approach has allowed adoption of existing software that satisfies the majority of system requirements. Four major features of the system include: 1) assistance in model parameter and forcing creation from large enterprise data sources; 2) conversion of model results and calibrated parameters to standard formats, making them available via standard web services; 3) tracking a model's processes, inputs, and outputs as a cohesive metadata record, allowing provenance tracking via reference to web services; and 4) generalized decision support tools which rely on a suite of standard data types and interfaces, rather than particular manually curated model-derived datasets. Recent progress made in data and web service standards related to sensor and/or model derived station time series, dynamic web processing, and metadata management are central to this system's function and will be presented briefly along with a functional overview of the applications that make up the system. As the separate pieces of this system progress, they will be combined and generalized to form a sort of social network for nationally consistent hydrologic modeling.

FermiGrid—experience and future plans

NASA Astrophysics Data System (ADS)

Chadwick, K.; Berman, E.; Canal, P.; Hesselroth, T.; Garzoglio, G.; Levshina, T.; Sergeev, V.; Sfiligoi, I.; Sharma, N.; Timm, S.; Yocum, D. R.

2008-07-01

Fermilab supports a scientific program that includes experiments and scientists located across the globe. In order to better serve this community, Fermilab has placed its production computer resources in a Campus Grid infrastructure called 'FermiGrid'. The FermiGrid infrastructure allows the large experiments at Fermilab to have priority access to their own resources, enables sharing of these resources in an opportunistic fashion, and movement of work (jobs, data) between the Campus Grid and National Grids such as Open Science Grid (OSG) and the Worldwide LHC Computing Grid Collaboration (WLCG). FermiGrid resources support multiple Virtual Organizations (VOs), including VOs from the OSG, EGEE, and the WLCG. Fermilab also makes leading contributions to the Open Science Grid in the areas of accounting, batch computing, grid security, job management, resource selection, site infrastructure, storage management, and VO services. Through the FermiGrid interfaces, authenticated and authorized VOs and individuals may access our core grid services, the 10,000+ Fermilab resident CPUs, near-petabyte (including CMS) online disk pools and the multi-petabyte Fermilab Mass Storage System. These core grid services include a site wide Globus gatekeeper, VO management services for several VOs, Fermilab site authorization services, grid user mapping services, as well as job accounting and monitoring, resource selection and data movement services. Access to these services is via standard and well-supported grid interfaces. We will report on the user experience of using the FermiGrid campus infrastructure interfaced to a national cyberinfrastructure - the successes and the problems.

FermiGrid - experience and future plans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chadwick, K.; Berman, E.; Canal, P.

2007-09-01

Fermilab supports a scientific program that includes experiments and scientists located across the globe. In order to better serve this community, Fermilab has placed its production computer resources in a Campus Grid infrastructure called 'FermiGrid'. The FermiGrid infrastructure allows the large experiments at Fermilab to have priority access to their own resources, enables sharing of these resources in an opportunistic fashion, and movement of work (jobs, data) between the Campus Grid and National Grids such as Open Science Grid and the WLCG. FermiGrid resources support multiple Virtual Organizations (VOs), including VOs from the Open Science Grid (OSG), EGEE and themore » Worldwide LHC Computing Grid Collaboration (WLCG). Fermilab also makes leading contributions to the Open Science Grid in the areas of accounting, batch computing, grid security, job management, resource selection, site infrastructure, storage management, and VO services. Through the FermiGrid interfaces, authenticated and authorized VOs and individuals may access our core grid services, the 10,000+ Fermilab resident CPUs, near-petabyte (including CMS) online disk pools and the multi-petabyte Fermilab Mass Storage System. These core grid services include a site wide Globus gatekeeper, VO management services for several VOs, Fermilab site authorization services, grid user mapping services, as well as job accounting and monitoring, resource selection and data movement services. Access to these services is via standard and well-supported grid interfaces. We will report on the user experience of using the FermiGrid campus infrastructure interfaced to a national cyberinfrastructure--the successes and the problems.« less

Improvements to PATRIC, the all-bacterial Bioinformatics Database and Analysis Resource Center

DOE PAGES

Davis, James J.; Brettin, Thomas; Dietrich, Emily M.; ...

2016-11-28

Here, the Pathosystems Resource Integration Center (PATRIC) is the bacterial Bioinformatics Resource Center. Recent changes to PATRIC include a redesign of the web interface and some new services that provide users with a platform that takes them from raw reads to an integrated analysis experience. The redesigned interface allows researchers direct access to tools and data, and the emphasis has changed to user-created genome-groups, with detailed summaries and views of the data that researchers have selected. Perhaps the biggest change has been the enhanced capability for researchers to analyze their private data and compare it to the available public data.more » Researchers can assemble their raw sequence reads and annotate the contigs using RASTtk. PATRIC also provides services for RNA-Seq, variation, model reconstruction and differential expression analysis, all delivered through an updated private workspace. Private data can be compared by `virtual integration' to any of PATRIC's public data. The number of genomes available for comparison in PATRIC has expanded to over 80 000, with a special emphasis on genomes with antimicrobial resistance data. PATRIC uses this data to improve both subsystem annotation and k-mer classification, and tags new genomes as having signatures that indicate susceptibility or resistance to specific antibiotics.« less

Tcl as a Software Environment for a TCS

NASA Astrophysics Data System (ADS)

Terrett, David L.

2002-12-01

This paper describes how the Tcl scripting language and C API has been used as the software environment for a telescope pointing kernel so that new pointing algorithms and software architectures can be developed and tested without needing a real-time operating system or real-time software environment. It has enabled development to continue outside the framework of a specific telescope project while continuing to build a system that is sufficiently complete to be capable of controlling real hardware but expending minimum effort on replacing the services that would normally by provided by a real-time software environment. Tcl is used as a scripting language for configuring the system at startup and then as the command interface for controlling the running system; the Tcl C language API is used to provided a system independent interface to file and socket I/O and other operating system services. The pointing algorithms themselves are implemented as a set of C++ objects calling C library functions that implement the algorithms described in [2]. Although originally designed as a test and development environment, the system, running as a soft real-time process on Linux, has been used to test the SOAR mount control system and will be used as the pointing kernel of the SOAR telescope control system

Improvements to PATRIC, the all-bacterial Bioinformatics Database and Analysis Resource Center

PubMed Central

Wattam, Alice R.; Davis, James J.; Assaf, Rida; Boisvert, Sébastien; Brettin, Thomas; Bun, Christopher; Conrad, Neal; Dietrich, Emily M.; Disz, Terry; Gabbard, Joseph L.; Gerdes, Svetlana; Henry, Christopher S.; Kenyon, Ronald W.; Machi, Dustin; Mao, Chunhong; Nordberg, Eric K.; Olsen, Gary J.; Murphy-Olson, Daniel E.; Olson, Robert; Overbeek, Ross; Parrello, Bruce; Pusch, Gordon D.; Shukla, Maulik; Vonstein, Veronika; Warren, Andrew; Xia, Fangfang; Yoo, Hyunseung; Stevens, Rick L.

2017-01-01

The Pathosystems Resource Integration Center (PATRIC) is the bacterial Bioinformatics Resource Center (https://www.patricbrc.org). Recent changes to PATRIC include a redesign of the web interface and some new services that provide users with a platform that takes them from raw reads to an integrated analysis experience. The redesigned interface allows researchers direct access to tools and data, and the emphasis has changed to user-created genome-groups, with detailed summaries and views of the data that researchers have selected. Perhaps the biggest change has been the enhanced capability for researchers to analyze their private data and compare it to the available public data. Researchers can assemble their raw sequence reads and annotate the contigs using RASTtk. PATRIC also provides services for RNA-Seq, variation, model reconstruction and differential expression analysis, all delivered through an updated private workspace. Private data can be compared by ‘virtual integration’ to any of PATRIC's public data. The number of genomes available for comparison in PATRIC has expanded to over 80 000, with a special emphasis on genomes with antimicrobial resistance data. PATRIC uses this data to improve both subsystem annotation and k-mer classification, and tags new genomes as having signatures that indicate susceptibility or resistance to specific antibiotics. PMID:27899627

New Data Products Available at the IRIS Data Management Center

NASA Astrophysics Data System (ADS)

Ahern, T.; Casey, R.; Kamb, L.; Zeleznik, M.; Ammon, C. J.

2007-12-01

With USArray data processing and services in full production, the IRIS Data Management Center (DMC) has developed an online tool to function as a library for products derived from raw USArray observations as well as other catalogs with broad interest produced and supplied by the geoscience community. The service, called SPADE, is a flexible, annotated cataloging system for storing heterogeneous data products supplied by registered providers. SPADE includes a web interface that allows users to search across the spectrum of varied data products using geographic, temporal, and/or keyword parameters to locate products of specific interest. In addition to cooperative product submissions from outside institutions, the IRIS DMC is collaborating and developing frameworks to produce and to provide interesting products that take advantage of data from USArray sensors. These products are automatically produced in near- real time following interesting seismic events, and broaden the range of information that IRIS delivers to the geoscience community. In this presentation we will demonstrate the SPADE query interface and present examples of the available data products such as Global Centroid Moment Tensor solutions from Harvard and Columbia Universities, historic earthquake data scanned from select WWSSN film chips, as well as IRIS-produced seismic record sections, and ground-motion animations derived from Transportable Array observations.

Air Quality uFIND: User-oriented Tool Set for Air Quality Data Discovery and Access

NASA Astrophysics Data System (ADS)

Hoijarvi, K.; Robinson, E. M.; Husar, R. B.; Falke, S. R.; Schultz, M. G.; Keating, T. J.

2012-12-01

Historically, there have been major impediments to seamless and effective data usage encountered by both data providers and users. Over the last five years, the international Air Quality (AQ) Community has worked through forums such as the Group on Earth Observations AQ Community of Practice, the ESIP AQ Working Group, and the Task Force on Hemispheric Transport of Air Pollution to converge on data format standards (e.g., netCDF), data access standards (e.g., Open Geospatial Consortium Web Coverage Services), metadata standards (e.g., ISO 19115), as well as other conventions (e.g., CF Naming Convention) in order to build an Air Quality Data Network. The centerpiece of the AQ Data Network is the web service-based tool set: user-oriented Filtering and Identification of Networked Data. The purpose of uFIND is to provide rich and powerful facilities for the user to: a) discover and choose a desired dataset by navigation through the multi-dimensional metadata space using faceted search, b) seamlessly access and browse datasets, and c) use uFINDs facilities as a web service for mashups with other AQ applications and portals. In a user-centric information system such as uFIND, the user experience is improved by metadata that includes the general fields for discovery as well as community-specific metadata to narrow the search beyond space, time and generic keyword searches. However, even with the community-specific additions, the ISO 19115 records were formed in compliance with the standard, so that other standards-based search interface could leverage this additional information. To identify the fields necessary for metadata discovery we started with the ISO 19115 Core Metadata fields and fields that were needed for a Catalog Service for the Web (CSW) Record. This fulfilled two goals - one to create valid ISO 19115 records and the other to be able to retrieve the records through a Catalog Service for the Web query. Beyond the required set of fields, the AQ Community added additional fields using a combination of keywords and ISO 19115 fields. These extensions allow discovery by measurement platform or observed phenomena. Beyond discovery metadata, the AQ records include service identification objects that allow standards-based clients, such as some brokers, to access the data found via OGC WCS or WMS data access protocols. uFIND, is one such smart client, this combination of discovery and access metadata allows the user to preview each registered dataset through spatial and temporal views; observe the data access and usage pattern and also find links to dataset-specific metadata directly in uFIND. The AQ data providers also benefit from this architecture since their data products are easier to find and re-use, enhancing the relevance and importance of their products. Finally, the earth science community at large benefits from the Service Oriented Architecture of uFIND, since it is a service itself and allows service-based interfacing with providers and users of the metadata, allowing uFIND facets to be further refined for a particular AQ application or completely repurposed for other Earth Science domains that use the same set of data access and metadata standards.

Applying natural language processing techniques to develop a task-specific EMR interface for timely stroke thrombolysis: A feasibility study.

PubMed

Sung, Sheng-Feng; Chen, Kuanchin; Wu, Darren Philbert; Hung, Ling-Chien; Su, Yu-Hsiang; Hu, Ya-Han

2018-04-01

To reduce errors in determining eligibility for intravenous thrombolytic therapy (IVT) in stroke patients through use of an enhanced task-specific electronic medical record (EMR) interface powered by natural language processing (NLP) techniques. The information processing algorithm utilized MetaMap to extract medical concepts from IVT eligibility criteria and expanded the concepts using the Unified Medical Language System Metathesaurus. Concepts identified from clinical notes by MetaMap were compared to those from IVT eligibility criteria. The task-specific EMR interface displays IVT-relevant information by highlighting phrases that contain matched concepts. Clinical usability was assessed with clinicians staffing the acute stroke team by comparing user performance while using the task-specific and the current EMR interfaces. The algorithm identified IVT-relevant concepts with micro-averaged precisions, recalls, and F1 measures of 0.998, 0.812, and 0.895 at the phrase level and of 1, 0.972, and 0.986 at the document level. Users using the task-specific interface achieved a higher accuracy score than those using the current interface (91% versus 80%, p = 0.016) in assessing the IVT eligibility criteria. The completion time between the interfaces was statistically similar (2.46 min versus 1.70 min, p = 0.754). Although the information processing algorithm had room for improvement, the task-specific EMR interface significantly reduced errors in assessing IVT eligibility criteria. The study findings provide evidence to support an NLP enhanced EMR system to facilitate IVT decision-making by presenting meaningful and timely information to clinicians, thereby offering a new avenue for improvements in acute stroke care. Copyright © 2018 Elsevier B.V. All rights reserved.

Dynamics Govern Specificity of a Protein-Protein Interface: Substrate Recognition by Thrombin

PubMed Central

Fuchs, Julian E.; Huber, Roland G.; Waldner, Birgit J.; Kahler, Ursula; von Grafenstein, Susanne; Kramer, Christian; Liedl, Klaus R.

2015-01-01

Biomolecular recognition is crucial in cellular signal transduction. Signaling is mediated through molecular interactions at protein-protein interfaces. Still, specificity and promiscuity of protein-protein interfaces cannot be explained using simplistic static binding models. Our study rationalizes specificity of the prototypic protein-protein interface between thrombin and its peptide substrates relying solely on binding site dynamics derived from molecular dynamics simulations. We find conformational selection and thus dynamic contributions to be a key player in biomolecular recognition. Arising entropic contributions complement chemical intuition primarily reflecting enthalpic interaction patterns. The paradigm “dynamics govern specificity” might provide direct guidance for the identification of specific anchor points in biomolecular recognition processes and structure-based drug design. PMID:26496636

New GES DISC Services Shortening the Path in Science Data Discovery

NASA Technical Reports Server (NTRS)

Li, Angela; Shie, Chung-Lin; Petrenko, Maksym; Hegde, Mahabaleshwa; Teng, William; Liu, Zhong; Bryant, Keith; Shen, Suhung; Hearty, Thomas; Wei, Jennifer;

Migrating Department of Defense (DoD) Web Service Based Applications to Mobile Computing Platforms

DTIC Science & Technology

2012-03-01

World Wide Web Consortium (W3C) Geolocation API to identify the device’s location and then center the map on the device. Finally, we modify the entry...THIS PAGE INTENTIONALLY LEFT BLANK xii List of Acronyms and Abbreviations API Application Programming Interface CSS Cascading Style Sheets CLIMO...Java API for XML Web Services Reference Implementation JS JavaScript JSNI JavaScript Native Interface METOC Meteorological and Oceanographic MAA Mobile

Tack coat optimization for HMA overlays laboratory testing.

DOT National Transportation Integrated Search

2008-09-01

Interface bonding between hot-mix asphalt (HMA) overlays and Portland cement concrete (PCC) pavements can be one of the most : significant factors affecting overlay service life. Various factors may affect the bonding condition at the interface, incl...

Research and development of a NYNEX switched multi-megabit data service prototype system

NASA Astrophysics Data System (ADS)

Maman, K. H.; Haines, Robert; Chatterjee, Samir

1991-02-01

Switched Multi-megabit Data Service (SMDS) is a proposed high-speed packet-switched service which will support broadband applications such as Local Area Network (LAN) interconnections across a metropolitan area and beyond. This service is designed to take advantage of evolving Metropolitan Area Network (MAN) standards and technology which will provide customers with 45-mbps and 1 . 5-mbps access to high-speed public data communications networks. This paper will briefly discuss SMDS and review its architecture including the Subscriber Network Interface (SNI) and the SMDS Interface Protocol (SIP). It will review the fundamental features of SMDS such as address screening addressing scheme and access classes. Then it will describe the SMDS prototype system developed in-house by NYNEX Science Technology.

Admission and Preventive Load Control for Delivery of Multicast and Broadcast Services via S-UMTS

NASA Astrophysics Data System (ADS)

Angelou, E.; Koutsokeras, N.; Andrikopoulos, I.; Mertzanis, I.; Karaliopoulos, M.; Henrio, P.

2003-07-01

An Admission Control strategy is proposed for unidirectional satellite systems delivering multicast and broadcast services to mobile users. In such systems, both the radio interface and the targeted services impose particular requirements on the RRM task. We briefly discuss the RRM requirements that stem from the services point of view and from the features of the SATIN access scheme that differentiate it from the conventional T-UMTS radio interface. The main functional entities of RRM and the alternative modes of operation are outlined and the proposed Admission Control algorithm is described in detail. The results from the simulation study that demonstrate its performance for a number of different scenarios are finally presented and conclusions derived.

Diy Geospatial Web Service Chains: Geochaining Make it Easy

NASA Astrophysics Data System (ADS)

Wu, H.; You, L.; Gui, Z.

2011-08-01

It is a great challenge for beginners to create, deploy and utilize a Geospatial Web Service Chain (GWSC). People in Computer Science are usually not familiar with geospatial domain knowledge. Geospatial practitioners may lack the knowledge about web services and service chains. The end users may lack both. However, integrated visual editing interfaces, validation tools, and oneclick deployment wizards may help to lower the learning curve and improve modelling skills so beginners will have a better experience. GeoChaining is a GWSC modelling tool designed and developed based on these ideas. GeoChaining integrates visual editing, validation, deployment, execution etc. into a unified platform. By employing a Virtual Globe, users can intuitively visualize raw data and results produced by GeoChaining. All of these features allow users to easily start using GWSC, regardless of their professional background and computer skills. Further, GeoChaining supports GWSC model reuse, meaning that an entire GWSC model created or even a specific part can be directly reused in a new model. This greatly improves the efficiency of creating a new GWSC, and also contributes to the sharing and interoperability of GWSC.

Health visitor views on consultation using the Solihull approach: a grounded theory study.

PubMed

Stefanopoulou, Evgenia; Coker, Sian; Greenshields, Maria; Pratt, Richard

2011-07-01

Consultation is integral to maintaining competence for health professionals and involves a collaborative relationship between specialist and primary care services. Although consultation aims to support them in their work, existing literature exploring health visitors' experiences of consultation is limited. This study explored health visitors' experiences of consultation in relation to their clinical practice, their experience of their work and its impact on the wider service. In all, 10 health visitors were interviewed using a semi-structured guide and analysis was subjected to a grounded theory framework. Participants' views were influenced by a combination of factors--consultants' training specific to their role, their communication and engagement, consultation's support of joint-working and/or transitions, and its relevance to and impact upon practice. Findings suggest that such interface activities require effective co-ordination, communication and structuring strategies, highlighting the importance of future initiatives in developing health visitors' mental health role further. Given the comparative lack of evaluation of such activities, these findings may inform policy-making and service development to ensure high quality of service delivery.

The Moving Edge: Perspectives on the Southern Wildland-Urban Interface

Treesearch

Martha C. Monroe; Alison W. Bowers; L. Annie Hermansen

2003-01-01

To better understand the wildland-urban interface across the 13 Southern States and to identify issues to be covered in the USDA Forest Service report, "Human Influences on Forest Ecosystems: The Southern Wildland-Urban Interface Assessment," 12 focus groups were conducted in 6 of the Southern States in May and June 2000. The groups were guided through a...

Mapping the Stacks: Sustainability and User Experience of Animated Maps in Library Discovery Interfaces

ERIC Educational Resources Information Center

McMillin, Bill; Gibson, Sally; MacDonald, Jean

2016-01-01

Animated maps of the library stacks were integrated into the catalog interface at Pratt Institute and into the EBSCO Discovery Service interface at Illinois State University. The mapping feature was developed for optimal automation of the update process to enable a range of library personnel to update maps and call-number ranges. The development…

ScienceDirect through SciVerse: a new way to approach Elsevier.

PubMed

Bengtson, Jason

2011-01-01

SciVerse is the new combined portal from Elsevier that services their ScienceDirect collection, SciTopics, and their Scopus database. Using SciVerse to access ScienceDirect is the specific focus of this review. Along with advanced keyword searching and citation searching options, SciVerse also incorporates a very useful image search feature. The aim seems to be not only to create an interface that provides broad functionality on par with other database search tools that many searchers use regularly but also to create an open platform that could be changed to respond effectively to the needs of customers.

MAPI: towards the integrated exploitation of bioinformatics Web Services.

PubMed

Ramirez, Sergio; Karlsson, Johan; Trelles, Oswaldo

2011-10-27

Bioinformatics is commonly featured as a well assorted list of available web resources. Although diversity of services is positive in general, the proliferation of tools, their dispersion and heterogeneity complicate the integrated exploitation of such data processing capacity. To facilitate the construction of software clients and make integrated use of this variety of tools, we present a modular programmatic application interface (MAPI) that provides the necessary functionality for uniform representation of Web Services metadata descriptors including their management and invocation protocols of the services which they represent. This document describes the main functionality of the framework and how it can be used to facilitate the deployment of new software under a unified structure of bioinformatics Web Services. A notable feature of MAPI is the modular organization of the functionality into different modules associated with specific tasks. This means that only the modules needed for the client have to be installed, and that the module functionality can be extended without the need for re-writing the software client. The potential utility and versatility of the software library has been demonstrated by the implementation of several currently available clients that cover different aspects of integrated data processing, ranging from service discovery to service invocation with advanced features such as workflows composition and asynchronous services calls to multiple types of Web Services including those registered in repositories (e.g. GRID-based, SOAP, BioMOBY, R-bioconductor, and others).

Space-based Networking Technology Developments in the Interplanetary Network Directorate Information Technology Program

NASA Technical Reports Server (NTRS)

Clare, Loren; Clement, B.; Gao, J.; Hutcherson, J.; Jennings, E.

2006-01-01

Described recent development of communications protocols, services, and associated tools targeted to reduce risk, reduce cost and increase efficiency of IND infrastructure and supported mission operations. Space-based networking technologies developed were: a) Provide differentiated quality of service (QoS) that will give precedence to traffic that users have selected as having the greatest importance and/or time-criticality; b) Improve the total value of information to users through the use of QoS prioritization techniques; c) Increase operational flexibility and improve command-response turnaround; d) Enable new class of networked and collaborative science missions; e) Simplify applications interfaces to communications services; and f) Reduce risk and cost from a common object model and automated scheduling and communications protocols. Technologies are described in three general areas: communications scheduling, middleware, and protocols. Additionally developed simulation environment, which provides comprehensive, quantitative understanding of the technologies performance within overall, evolving architecture, as well as ability to refine & optimize specific components.

Data Integration Using SOAP in the VSO

NASA Astrophysics Data System (ADS)

Tian, K. Q.; Bogart, R. S.; Davey, A.; Dimitoglou, G.; Gurman, J. B.; Hill, F.; Martens, P. C.; Wampler, S.

2003-05-01

The Virtual Solar Observatory (VSO) project has implemented a time interval search for all four participating data archives. The back-end query services are implemented as web services, and are accessible via SOAP. SOAP (Simple Object Access Protocol) defines an RPC (Remote Procedure Call) mechanism that employs HTTP as its transport and encodes the client-server interactions (request and response messages) in XML (eXtensible Markup Language) documents. In addition to its core function of identifying relevant datasets in the local archive, the SOAP server at each data provider acts as a "wrapper" that maps descriptions in an abstract data model to those in the provider-specific data model, and vice versa. It is in this way that VSO integrates heterogeneous data services and allows access to them using a common interface. Our experience with SOAP has been fruitful. It has proven to be a better alternative to traditional web access methods, namely POST and GET, because of its flexibility and interoperability.

A Neuroimaging Web Services Interface as a Cyber Physical System for Medical Imaging and Data Management in Brain Research: Design Study.

PubMed

Lizarraga, Gabriel; Li, Chunfei; Cabrerizo, Mercedes; Barker, Warren; Loewenstein, David A; Duara, Ranjan; Adjouadi, Malek

2018-04-26

Structural and functional brain images are essential imaging modalities for medical experts to study brain anatomy. These images are typically visually inspected by experts. To analyze images without any bias, they must be first converted to numeric values. Many software packages are available to process the images, but they are complex and difficult to use. The software packages are also hardware intensive. The results obtained after processing vary depending on the native operating system used and its associated software libraries; data processed in one system cannot typically be combined with data on another system. The aim of this study was to fulfill the neuroimaging community’s need for a common platform to store, process, explore, and visualize their neuroimaging data and results using Neuroimaging Web Services Interface: a series of processing pipelines designed as a cyber physical system for neuroimaging and clinical data in brain research. Neuroimaging Web Services Interface accepts magnetic resonance imaging, positron emission tomography, diffusion tensor imaging, and functional magnetic resonance imaging. These images are processed using existing and custom software packages. The output is then stored as image files, tabulated files, and MySQL tables. The system, made up of a series of interconnected servers, is password-protected and is securely accessible through a Web interface and allows (1) visualization of results and (2) downloading of tabulated data. All results were obtained using our processing servers in order to maintain data validity and consistency. The design is responsive and scalable. The processing pipeline started from a FreeSurfer reconstruction of Structural magnetic resonance imaging images. The FreeSurfer and regional standardized uptake value ratio calculations were validated using Alzheimer’s Disease Neuroimaging Initiative input images, and the results were posted at the Laboratory of Neuro Imaging data archive. Notable leading researchers in the field of Alzheimer’s Disease and epilepsy have used the interface to access and process the data and visualize the results. Tabulated results with unique visualization mechanisms help guide more informed diagnosis and expert rating, providing a truly unique multimodal imaging platform that combines magnetic resonance imaging, positron emission tomography, diffusion tensor imaging, and resting state functional magnetic resonance imaging. A quality control component was reinforced through expert visual rating involving at least 2 experts. To our knowledge, there is no validated Web-based system offering all the services that Neuroimaging Web Services Interface offers. The intent of Neuroimaging Web Services Interface is to create a tool for clinicians and researchers with keen interest on multimodal neuroimaging. More importantly, Neuroimaging Web Services Interface significantly augments the Alzheimer’s Disease Neuroimaging Initiative data, especially since our data contain a large cohort of Hispanic normal controls and Alzheimer’s Disease patients. The obtained results could be scrutinized visually or through the tabulated forms, informing researchers on subtle changes that characterize the different stages of the disease. ©Gabriel Lizarraga, Chunfei Li, Mercedes Cabrerizo, Warren Barker, David A Loewenstein, Ranjan Duara, Malek Adjouadi. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 26.04.2018.

Characteristics of a future aeronautical satellite communications system

NASA Technical Reports Server (NTRS)

Sohn, Philip Y.; Stern, Alan; Schmidt, Fred

1991-01-01

A possible operational system scenario for providing satellite communications services to the future aviation community was analyzed. The system concept relies on a Ka-band (20/30 GHz) satellite that utilizes Multibeam Antenna (MBA) technology. The aircraft terminal uses an extremely small aperture antenna as a result of using this higher spectrum at Ka-band. The satellite functions as a relay between the aircraft and the ground stations. The ground stations function as interfaces to the existing terrestrial networks such as the Public Service Telephone Network (PSTN). Various system tradeoffs are first examined to ensure optimized system parameters. High level performance specifications and design approaches are generated for the space, ground, and aeronautical elements in the system. Both technical and economical issues affecting the feasibility of the studied concept are addressed with the 1995 timeframe in mind.

Characteristics of a future aeronautical satellite communications system

NASA Technical Reports Server (NTRS)

Sohn, Philip Y.; Stern, Alan; Schmidt, Fred

1991-01-01

A possible operational system scenario for providing satellite communications services to the future aviation community was analyzed. The system concept relies on a Ka-band (20/30 GHz) satellite that utilizes multibeam antenna (MBA) technology. The aircraft terminal uses an extremely small aperture antenna as a result of using this higher spectrum at Ka-band. The satellite functions as a relay between the aircraft and the ground stations. The ground stations function as interfaces to the existing terrestrial networks such as the Public Service Telephone Network (PSTN). Various system tradeoffs are first examined to ensure optimized system parameters. High level performance specifications and design approaches are generated for the space, ground, and aeronautical elements in the system. Both technical and economical issues affecting the feasibility of the studied concept are addressed with the 1995 timeframe in mind.

A resource oriented webs service for environmental modeling

NASA Astrophysics Data System (ADS)

Ferencik, Ioan

2013-04-01

Environmental modeling is a largely adopted practice in the study of natural phenomena. Environmental models can be difficult to build and use and thus sharing them within the community is an important aspect. The most common approach to share a model is to expose it as a web service. In practice the interaction with this web service is cumbersome due to lack of standardized contract and the complexity of the model being exposed. In this work we investigate the use of a resource oriented approach in exposing environmental models as web services. We view a model as a layered resource build atop the object concept from Object Oriented Programming, augmented with persistence capabilities provided by an embedded object database to keep track of its state and implementing the four basic principles of resource oriented architectures: addressability, statelessness, representation and uniform interface. For implementation we use exclusively open source software: Django framework, dyBase object oriented database and Python programming language. We developed a generic framework of resources structured into a hierarchy of types and consequently extended this typology with recurses specific to the domain of environmental modeling. To test our web service we used cURL, a robust command-line based web client.

47 CFR 76.1903 - Interfaces.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false Interfaces. 76.1903 Section 76.1903 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES MULTICHANNEL VIDEO AND... through any analog or digital output authorized or permitted under license, law or regulation governing...

The development of an intelligent user interface for NASA's scientific databases

NASA Technical Reports Server (NTRS)

Campbell, William J.; Roelofs, Larry H.

1986-01-01

The National Space Science Data Center (NSSDC) has initiated an Intelligent Data Management (IDM) research effort which has as one of its components, the development of an Intelligent User Interface (IUI). The intent of the IUI effort is to develop a friendly and intelligent user interface service that is based on expert systems and natural language processing technologies. This paper presents the design concepts, development approach and evaluation of performance of a prototype Intelligent User Interface Subsystem (IUIS) supporting an operational database.

Using binary classification to prioritize and curate articles for the Comparative Toxicogenomics Database.

PubMed

Vishnyakova, Dina; Pasche, Emilie; Ruch, Patrick

2012-01-01

We report on the original integration of an automatic text categorization pipeline, so-called ToxiCat (Toxicogenomic Categorizer), that we developed to perform biomedical documents classification and prioritization in order to speed up the curation of the Comparative Toxicogenomics Database (CTD). The task can be basically described as a binary classification task, where a scoring function is used to rank a selected set of articles. Then components of a question-answering system are used to extract CTD-specific annotations from the ranked list of articles. The ranking function is generated using a Support Vector Machine, which combines three main modules: an information retrieval engine for MEDLINE (EAGLi), a gene normalization service (NormaGene) developed for a previous BioCreative campaign and finally, a set of answering components and entity recognizer for diseases and chemicals. The main components of the pipeline are publicly available both as web application and web services. The specific integration performed for the BioCreative competition is available via a web user interface at http://pingu.unige.ch:8080/Toxicat.

Data Mining as a Service (DMaaS)

NASA Astrophysics Data System (ADS)

Tejedor, E.; Piparo, D.; Mascetti, L.; Moscicki, J.; Lamanna, M.; Mato, P.

2016-10-01

Data Mining as a Service (DMaaS) is a software and computing infrastructure that allows interactive mining of scientific data in the cloud. It allows users to run advanced data analyses by leveraging the widely adopted Jupyter notebook interface. Furthermore, the system makes it easier to share results and scientific code, access scientific software, produce tutorials and demonstrations as well as preserve the analyses of scientists. This paper describes how a first pilot of the DMaaS service is being deployed at CERN, starting from the notebook interface that has been fully integrated with the ROOT analysis framework, in order to provide all the tools for scientists to run their analyses. Additionally, we characterise the service backend, which combines a set of IT services such as user authentication, virtual computing infrastructure, mass storage, file synchronisation, development portals or batch systems. The added value acquired by the combination of the aforementioned categories of services is discussed, focusing on the opportunities offered by the CERNBox synchronisation service and its massive storage backend, EOS.

A Tutorial on Interfacing the Object Management Group (OMG) Data Distribution Service (DDS) with LabView

NASA Technical Reports Server (NTRS)

Smith, Kevin

2011-01-01

This tutorial will explain the concepts and steps for interfacing a National Instruments LabView virtual instrument (VI) running on a Windows platform with another computer via the Object Management Group (OMG) Data Distribution Service (DDS) as implemented by the Twin Oaks Computing CoreDX. This paper is for educational purposes only and therefore, the referenced source code will be simplistic and void of all error checking. Implementation will be accomplished using the C programming language.

Service on demand for ISS users

NASA Astrophysics Data System (ADS)

Hüser, Detlev; Berg, Marco; Körtge, Nicole; Mildner, Wolfgang; Salmen, Frank; Strauch, Karsten

2002-07-01

Since the ISS started its operational phase, the need of logistics scenarios and solutions, supporting the utilisation of the station and its facilities, becomes increasingly important. Our contribution to this challenge is a SERVICE On DEMAND for ISS users, which offers a business friendly engineering and logistics support for the resupply of the station. Especially the utilisation by commercial and industrial users is supported and simplified by this service. Our industrial team, consisting of OHB-System and BEOS, provides experience and development support for space dedicated hard- and software elements, their transportation and operation. Furthermore, we operate as the interface between customer and the envisaged space authorities. Due to a variety of tailored service elements and the ongoing servicing, customers can concentrate on their payload content or mission objectives and don't have to deal with space-specific techniques and regulations. The SERVICE On DEMAND includes the following elements: ITR is our in-orbit platform service. ITR is a transport rack, used in the SPACEHAB logistics double module, for active and passive payloads on subrack- and drawer level of different standards. Due to its unique late access and early retrieval capability, ITR increases the flexibility concerning transport capabilities to and from the ISS. RIST is our multi-functional test facility for ISPR-based experiment drawer and locker payloads. The test program concentrates on physical and functional interface and performance testing at the payload developers site prior to the shipment to the integration and launch. The RIST service program comprises consulting, planning and engineering as well. The RIST test suitcase is planned to be available for lease or rent to users, too. AMTSS is an advanced multimedia terminal consulting service for communication with the space station scientific facilities, as part of the user home-base. This unique ISS multimedia kit combines communication technologies, software tools and hardware to provide a simple and cost-efficient access to data from the station, using the interconnection ground subnetwork. BEOLOG is our efficient ground logistics service for the transportation of payload hardware and support equipment from the user location to the launch/landing sites for the ISS service flights and back home. The main function of this service is the planning and organisation of all packaging, handling, storage & transportation tasks according to international rules. In conclusion, we offer novel service elements for logistics ground- and flight-infrastructure, dedicated for ISS users. These services can be easily adapted to the needs of users and are suitable for other μg- platforms as well.

Component, Context, and Manufacturing Model Library (C2M2L)

DTIC Science & Technology

2012-11-01

123 5.1 MML Population and Web Service Interface...104 Table 41. Relevant Questions with Associated Web Services...the models, and implementing web services that provide semantically aware programmatic access to the models, including implementing the MS&T

Architecture Design of Healthcare Software-as-a-Service Platform for Cloud-Based Clinical Decision Support Service.

PubMed

Oh, Sungyoung; Cha, Jieun; Ji, Myungkyu; Kang, Hyekyung; Kim, Seok; Heo, Eunyoung; Han, Jong Soo; Kang, Hyunggoo; Chae, Hoseok; Hwang, Hee; Yoo, Sooyoung

2015-04-01

To design a cloud computing-based Healthcare Software-as-a-Service (SaaS) Platform (HSP) for delivering healthcare information services with low cost, high clinical value, and high usability. We analyzed the architecture requirements of an HSP, including the interface, business services, cloud SaaS, quality attributes, privacy and security, and multi-lingual capacity. For cloud-based SaaS services, we focused on Clinical Decision Service (CDS) content services, basic functional services, and mobile services. Microsoft's Azure cloud computing for Infrastructure-as-a-Service (IaaS) and Platform-as-a-Service (PaaS) was used. The functional and software views of an HSP were designed in a layered architecture. External systems can be interfaced with the HSP using SOAP and REST/JSON. The multi-tenancy model of the HSP was designed as a shared database, with a separate schema for each tenant through a single application, although healthcare data can be physically located on a cloud or in a hospital, depending on regulations. The CDS services were categorized into rule-based services for medications, alert registration services, and knowledge services. We expect that cloud-based HSPs will allow small and mid-sized hospitals, in addition to large-sized hospitals, to adopt information infrastructures and health information technology with low system operation and maintenance costs.

Web-based health services and clinical decision support.

PubMed

Jegelevicius, Darius; Marozas, Vaidotas; Lukosevicius, Arunas; Patasius, Martynas

2004-01-01

The purpose of this study was the development of a Web-based e-health service for comprehensive assistance and clinical decision support. The service structure consists of a Web server, a PHP-based Web interface linked to a clinical SQL database, Java applets for interactive manipulation and visualization of signals and a Matlab server linked with signal and data processing algorithms implemented by Matlab programs. The service ensures diagnostic signal- and image analysis-sbased clinical decision support. By using the discussed methodology, a pilot service for pathology specialists for automatic calculation of the proliferation index has been developed. Physicians use a simple Web interface for uploading the pictures under investigation to the server; subsequently a Java applet interface is used for outlining the region of interest and, after processing on the server, the requested proliferation index value is calculated. There is also an "expert corner", where experts can submit their index estimates and comments on particular images, which is especially important for system developers. These expert evaluations are used for optimization and verification of automatic analysis algorithms. Decision support trials have been conducted for ECG and ophthalmology ultrasonic investigations of intraocular tumor differentiation. Data mining algorithms have been applied and decision support trees constructed. These services are under implementation by a Web-based system too. The study has shown that the Web-based structure ensures more effective, flexible and accessible services compared with standalone programs and is very convenient for biomedical engineers and physicians, especially in the development phase.

TMS communications software. Volume 2: Bus interface unit

NASA Technical Reports Server (NTRS)

Gregor, P. J.

1979-01-01

A data bus communication system to support the space shuttle's Trend Monitoring System (TMS) and to provide a basis for evaluation of the bus concept is described. Installation of the system included developing both hardware and software interfaces between the bus and the specific TMS computers and terminals. The software written for the microprocessor-based bus interface units is described. The software implements both the general bus communications protocol and also the specific interface protocols for the TMS computers and terminals.

Information visualization: Beyond traditional engineering

NASA Technical Reports Server (NTRS)

Thomas, James J.

1995-01-01

This presentation addresses a different aspect of the human-computer interface; specifically the human-information interface. This interface will be dominated by an emerging technology called Information Visualization (IV). IV goes beyond the traditional views of computer graphics, CADS, and enables new approaches for engineering. IV specifically must visualize text, documents, sound, images, and video in such a way that the human can rapidly interact with and understand the content structure of information entities. IV is the interactive visual interface between humans and their information resources.

Evolutionary diversification of protein-protein interactions by interface add-ons.

PubMed

Plach, Maximilian G; Semmelmann, Florian; Busch, Florian; Busch, Markus; Heizinger, Leonhard; Wysocki, Vicki H; Merkl, Rainer; Sterner, Reinhard

2017-10-03

Cells contain a multitude of protein complexes whose subunits interact with high specificity. However, the number of different protein folds and interface geometries found in nature is limited. This raises the question of how protein-protein interaction specificity is achieved on the structural level and how the formation of nonphysiological complexes is avoided. Here, we describe structural elements called interface add-ons that fulfill this function and elucidate their role for the diversification of protein-protein interactions during evolution. We identified interface add-ons in 10% of a representative set of bacterial, heteromeric protein complexes. The importance of interface add-ons for protein-protein interaction specificity is demonstrated by an exemplary experimental characterization of over 30 cognate and hybrid glutamine amidotransferase complexes in combination with comprehensive genetic profiling and protein design. Moreover, growth experiments showed that the lack of interface add-ons can lead to physiologically harmful cross-talk between essential biosynthetic pathways. In sum, our complementary in silico, in vitro, and in vivo analysis argues that interface add-ons are a practical and widespread evolutionary strategy to prevent the formation of nonphysiological complexes by specializing protein-protein interactions.

Big Data Discovery and Access Services through NOAA OneStop

NASA Astrophysics Data System (ADS)

Casey, K. S.; Neufeld, D.; Ritchey, N. A.; Relph, J.; Fischman, D.; Baldwin, R.

2017-12-01

The NOAA OneStop Project was created as a pathfinder effort to to improve the discovery of, access to, and usability of NOAA's vast and diverse collection of big data. OneStop is led by the NOAA/NESDIS National Centers for Environmental Information (NCEI), and is seen as a key NESDIS contribution to NOAA's open data and data stewardship efforts. OneStop consists of an entire framework of services, from storage and interoperable access services at the base, through metadata and catalog services in the middle, to a modern user interface experience at the top. Importantly, it is an open framework where external tools and services can connect at whichever level is most appropriate. Since the beta release of the OneStop user interface at the 2016 Fall AGU meeting, significant progress has been made improving and modernizing many NOAA data collections to optimize their use within the framework. In addition, OneStop has made progress implementing robust metadata management and catalog systems at the collection and granule level and improving the user experience with the web interface. This progress will be summarized and the results of extensive user testing including professional usability studies will be reviewed. Key big data technologies supporting the framework will be presented and a community input sought on the future directions of the OneStop Project.

Optimizing the Information Presentation on Mining Potential by using Web Services Technology with Restful Protocol

NASA Astrophysics Data System (ADS)

Abdillah, T.; Dai, R.; Setiawan, E.

2018-02-01

This study aims to develop the application of Web Services technology with RestFul Protocol to optimize the information presentation on mining potential. This study used User Interface Design approach for the information accuracy and relevance as well as the Web Service for the reliability in presenting the information. The results show that: the information accuracy and relevance regarding mining potential can be seen from the achievement of User Interface implementation in the application that is based on the following rules: The consideration of the appropriate colours and objects, the easiness of using the navigation, and users’ interaction with the applications that employs symbols and languages understood by the users; the information accuracy and relevance related to mining potential can be observed by the information presented by using charts and Tool Tip Text to help the users understand the provided chart/figure; the reliability of the information presentation is evident by the results of Web Services testing in Figure 4.5.6. This study finds out that User Interface Design and Web Services approaches (for the access of different Platform apps) are able to optimize the presentation. The results of this study can be used as a reference for software developers and Provincial Government of Gorontalo.

Standardized Access and Processing of Multi-Source Earth Observation Time-Series Data within a Regional Data Middleware

NASA Astrophysics Data System (ADS)

Eberle, J.; Schmullius, C.

2017-12-01

Increasing archives of global satellite data present a new challenge to handle multi-source satellite data in a user-friendly way. Any user is confronted with different data formats and data access services. In addition the handling of time-series data is complex as an automated processing and execution of data processing steps is needed to supply the user with the desired product for a specific area of interest. In order to simplify the access to data archives of various satellite missions and to facilitate the subsequent processing, a regional data and processing middleware has been developed. The aim of this system is to provide standardized and web-based interfaces to multi-source time-series data for individual regions on Earth. For further use and analysis uniform data formats and data access services are provided. Interfaces to data archives of the sensor MODIS (NASA) as well as the satellites Landsat (USGS) and Sentinel (ESA) have been integrated in the middleware. Various scientific algorithms, such as the calculation of trends and breakpoints of time-series data, can be carried out on the preprocessed data on the basis of uniform data management. Jupyter Notebooks are linked to the data and further processing can be conducted directly on the server using Python and the statistical language R. In addition to accessing EO data, the middleware is also used as an intermediary between the user and external databases (e.g., Flickr, YouTube). Standardized web services as specified by OGC are provided for all tools of the middleware. Currently, the use of cloud services is being researched to bring algorithms to the data. As a thematic example, an operational monitoring of vegetation phenology is being implemented on the basis of various optical satellite data and validation data from the German Weather Service. Other examples demonstrate the monitoring of wetlands focusing on automated discovery and access of Landsat and Sentinel data for local areas.

New Web Services for Broader Access to National Deep Submergence Facility Data Resources Through the Interdisciplinary Earth Data Alliance

NASA Astrophysics Data System (ADS)

Ferrini, V. L.; Grange, B.; Morton, J. J.; Soule, S. A.; Carbotte, S. M.; Lehnert, K.

2016-12-01

The National Deep Submergence Facility (NDSF) operates the Human Occupied Vehicle (HOV) Alvin, the Remotely Operated Vehicle (ROV) Jason, and the Autonomous Underwater Vehicle (AUV) Sentry. These vehicles are deployed throughout the global oceans to acquire sensor data and physical samples for a variety of interdisciplinary science programs. As part of the EarthCube Integrative Activity Alliance Testbed Project (ATP), new web services were developed to improve access to existing online NDSF data and metadata resources. These services make use of tools and infrastructure developed by the Interdisciplinary Earth Data Alliance (IEDA) and enable programmatic access to metadata and data resources as well as the development of new service-driven user interfaces. The Alvin Frame Grabber and Jason Virtual Van enable the exploration of frame-grabbed images derived from video cameras on NDSF dives. Metadata available for each image includes time and vehicle position, data from environmental sensors, and scientist-generated annotations, and data are organized and accessible by cruise and/or dive. A new FrameGrabber web service and service-driven user interface were deployed to offer integrated access to these data resources through a single API and allows users to search across content curated in both systems. In addition, a new NDSF Dive Metadata web service and service-driven user interface was deployed to provide consolidated access to basic information about each NDSF dive (e.g. vehicle name, dive ID, location, etc), which is important for linking distributed data resources curated in different data systems.

Rapid Prototyping of Hydrologic Model Interfaces with IPython

NASA Astrophysics Data System (ADS)

Farthing, M. W.; Winters, K. D.; Ahmadia, A. J.; Hesser, T.; Howington, S. E.; Johnson, B. D.; Tate, J.; Kees, C. E.

2014-12-01

A significant gulf still exists between the state of practice and state of the art in hydrologic modeling. Part of this gulf is due to the lack of adequate pre- and post-processing tools for newly developed computational models. The development of user interfaces has traditionally lagged several years behind the development of a particular computational model or suite of models. As a result, models with mature interfaces often lack key advancements in model formulation, solution methods, and/or software design and technology. Part of the problem has been a focus on developing monolithic tools to provide comprehensive interfaces for the entire suite of model capabilities. Such efforts require expertise in software libraries and frameworks for creating user interfaces (e.g., Tcl/Tk, Qt, and MFC). These tools are complex and require significant investment in project resources (time and/or money) to use. Moreover, providing the required features for the entire range of possible applications and analyses creates a cumbersome interface. For a particular site or application, the modeling requirements may be simplified or at least narrowed, which can greatly reduce the number and complexity of options that need to be accessible to the user. However, monolithic tools usually are not adept at dynamically exposing specific workflows. Our approach is to deliver highly tailored interfaces to users. These interfaces may be site and/or process specific. As a result, we end up with many, customized interfaces rather than a single, general-use tool. For this approach to be successful, it must be efficient to create these tailored interfaces. We need technology for creating quality user interfaces that is accessible and has a low barrier for integration into model development efforts. Here, we present efforts to leverage IPython notebooks as tools for rapid prototyping of site and application-specific user interfaces. We provide specific examples from applications in near-shore environments as well as levee analysis. We discuss our design decisions and methodology for developing customized interfaces, strategies for delivery of the interfaces to users in various computing environments, as well as implications for the design/implementation of simulation models.

KENNEDY SPACE CENTER, FLA. - Workers in KSC's Vertical Processing Facility make final adjustments to the Flight Support System (FSS) for STS-82, the second Hubble Space Telescope servicing mission. The FSS is reusable flight hardware that provides the mechanical, structural and electrical interfaces between HST, the space support equipment and the orbiter for payload retrieval and on-orbit servicing. Liftoff aboard Discovery is targeted Feb. 11 with a crew of seven.

NASA Image and Video Library

1997-01-16

KENNEDY SPACE CENTER, FLA. - Workers in KSC's Vertical Processing Facility make final adjustments to the Flight Support System (FSS) for STS-82, the second Hubble Space Telescope servicing mission. The FSS is reusable flight hardware that provides the mechanical, structural and electrical interfaces between HST, the space support equipment and the orbiter for payload retrieval and on-orbit servicing. Liftoff aboard Discovery is targeted Feb. 11 with a crew of seven.

Making geospatial data in ASF archive readily accessible

NASA Astrophysics Data System (ADS)

Gens, R.; Hogenson, K.; Wolf, V. G.; Drew, L.; Stern, T.; Stoner, M.; Shapran, M.

2015-12-01

The way geospatial data is searched, managed, processed and used has changed significantly in recent years. A data archive such as the one at the Alaska Satellite Facility (ASF), one of NASA's twelve interlinked Distributed Active Archive Centers (DAACs), used to be searched solely via user interfaces that were specifically developed for its particular archive and data sets. ASF then moved to using an application programming interface (API) that defined a set of routines, protocols, and tools for distributing the geospatial information stored in the database in real time. This provided a more flexible access to the geospatial data. Yet, it was up to user to develop the tools to get a more tailored access to the data they needed. We present two new approaches for serving data to users. In response to the recent Nepal earthquake we developed a data feed for distributing ESA's Sentinel data. Users can subscribe to the data feed and are provided with the relevant metadata the moment a new data set is available for download. The second approach was an Open Geospatial Consortium (OGC) web feature service (WFS). The WFS hosts the metadata along with a direct link from which the data can be downloaded. It uses the open-source GeoServer software (Youngblood and Iacovella, 2013) and provides an interface to include the geospatial information in the archive directly into the user's geographic information system (GIS) as an additional data layer. Both services are run on top of a geospatial PostGIS database, an open-source geographic extension for the PostgreSQL object-relational database (Marquez, 2015). Marquez, A., 2015. PostGIS essentials. Packt Publishing, 198 p. Youngblood, B. and Iacovella, S., 2013. GeoServer Beginner's Guide, Packt Publishing, 350 p.

Mercury Shopping Cart Interface

NASA Technical Reports Server (NTRS)

Pfister, Robin; McMahon, Joe

2006-01-01

Mercury Shopping Cart Interface (MSCI) is a reusable component of the Power User Interface 5.0 (PUI) program described in another article. MSCI is a means of encapsulating the logic and information needed to describe an orderable item consistent with Mercury Shopping Cart service protocol. Designed to be used with Web-browser software, MSCI generates Hypertext Markup Language (HTML) pages on which ordering information can be entered. MSCI comprises two types of Practical Extraction and Report Language (PERL) modules: template modules and shopping-cart logic modules. Template modules generate HTML pages for entering the required ordering details and enable submission of the order via a Hypertext Transfer Protocol (HTTP) post. Shopping cart modules encapsulate the logic and data needed to describe an individual orderable item to the Mercury Shopping Cart service. These modules evaluate information entered by the user to determine whether it is sufficient for the Shopping Cart service to process the order. Once an order has been passed from MSCI to a deployed Mercury Shopping Cart server, there is no further interaction with the user.

Peri-Implant Distribution of Polyethylene Debris in Postmortem-Retrieved Knee Arthroplasties: Can Polyethylene Debris Explain Loss of Cement-Bone Interlock in Successful Total Knee Arthroplasties?

PubMed

Cyndari, Karen I; Goodheart, Jacklyn R; Miller, Mark A; Oest, Megan E; Damron, Timothy A; Mann, Kenneth A

2017-07-01

Loss of mechanical interlock between cement and bone with in vivo service has been recently quantified for functioning, nonrevised, cemented total knee arthroplasties (TKAs). The cause of interlocking trabecular resorption is not known. The goal of this study is to quantify the distribution of PE debris at the cement-bone interface and determine if polyethylene (PE) debris is locally associated with loss of interlock. Fresh, nonrevised, postmortem-retrieved TKAs (n = 8) were obtained en bloc. Laboratory-prepared constructs (n = 2) served as negative controls. The intact cement-bone interface of each proximal tibia was embedded in Spurr's resin, sectioned, and imaged under polarized light to identify birefringent PE particles. PE wear particle number density was quantified at the cement-bone interface and distal to the interface, and then compared with local loss of cement-bone interlock. The average PE particle number density for postmortem-retrieved TKAs ranged from 8.6 (1.3) to 24.9 (3.1) particles/mm 2 (standard error) but was weakly correlated with years in service. The average particle number density was twice as high as distal (>5mm) to the interface compared to at the interface. The local loss of interlock at the interface was not related to the presence, absence, or particle density of PE. PE debris can migrate extensively along the cement-bone interface of well-fixed tibial components. However, the amount of local bone loss at the cement-bone interface was not correlated with the amount of PE debris at the interface, suggesting that the observed loss of trabecular interlock in these well-fixed TKAs may be due to alternative factors. Copyright © 2017 Elsevier Inc. All rights reserved.

Mars Express Forward Link Capabilities for the Mars Relay Operations Service (MaROS)

NASA Technical Reports Server (NTRS)

Allard, Daniel A.; Wallick, Michael N.; Gladden, Roy E.; Wang, Paul

2012-01-01

This software provides a new capability for landed Mars assets to perform forward link relay through the Mars Express (MEX) European Union orbital spacecraft. It solves the problem of standardizing the relay interface between lander missions and MEX. The Mars Operations Relay Service (MaROS) is intended as a central point for relay planning and post-pass analysis for all Mars landed and orbital assets. Through the first two phases of implementation, MaROS supports relay coordination through the Odyssey orbiter and the Mars Reconnaissance Orbiter (MRO). With this new software, MaROS now fully integrates the Mars Express spacecraft into the relay picture. This new software generates and manages a new set of file formats that allows for relay request to MEX for forward and return link relay, including the parameters specific to MEX. Existing MEX relay planning interactions were performed via email exchanges and point-to-point file transfers. By integrating MEX into MaROS, all transactions are managed by a centralized service for tracking and analysis. Additionally, all lander missions have a single, shared interface with MEX and do not have to integrate on a mission-by mission basis. Relay is a critical element of Mars lander data management. Landed assets depend largely upon orbital relay for data delivery, which can be impacted by the availability and health of each orbiter in the network. At any time, an issue may occur to prevent relay. For this reason, it is imperative that all possible orbital assets be integrated into the overall relay picture.

cPath: open source software for collecting, storing, and querying biological pathways

PubMed Central

Cerami, Ethan G; Bader, Gary D; Gross, Benjamin E; Sander, Chris

2006-01-01

Background Biological pathways, including metabolic pathways, protein interaction networks, signal transduction pathways, and gene regulatory networks, are currently represented in over 220 diverse databases. These data are crucial for the study of specific biological processes, including human diseases. Standard exchange formats for pathway information, such as BioPAX, CellML, SBML and PSI-MI, enable convenient collection of this data for biological research, but mechanisms for common storage and communication are required. Results We have developed cPath, an open source database and web application for collecting, storing, and querying biological pathway data. cPath makes it easy to aggregate custom pathway data sets available in standard exchange formats from multiple databases, present pathway data to biologists via a customizable web interface, and export pathway data via a web service to third-party software, such as Cytoscape, for visualization and analysis. cPath is software only, and does not include new pathway information. Key features include: a built-in identifier mapping service for linking identical interactors and linking to external resources; built-in support for PSI-MI and BioPAX standard pathway exchange formats; a web service interface for searching and retrieving pathway data sets; and thorough documentation. The cPath software is freely available under the LGPL open source license for academic and commercial use. Conclusion cPath is a robust, scalable, modular, professional-grade software platform for collecting, storing, and querying biological pathways. It can serve as the core data handling component in information systems for pathway visualization, analysis and modeling. PMID:17101041

User interaction with the LUCIFER control software

NASA Astrophysics Data System (ADS)

Knierim, Volker; Jütte, Marcus; Polsterer, Kai; Schimmelmann, Jan

2006-06-01

We present the concept and design of the interaction between users and the LUCIFER Control Software Package. The necessary functionality that must be provided to a user depends on and differs greatly for the different user types (i.e., engineers and observers). While engineers want total control over every service provided by the software system, observers are typically only interested in a fault tolerant and efficient user interface that helps them to carry out their observations in the best possible way during the night. To provide the functionality engineers need, direct access to a service is necessary. This may harbor a possible threat to the instrument in the case of a faulty operation by the engineer, but is the only way to test every unit during integration and commissioning of the instrument, and for service time later on. The observer on the other hand should only have indirect access to the instrument, controlled by an instrument manager service that ensures the necessary safety checks so that no harm can be done to the instrument. Our design of the user interaction provides such an approach on a level that is transparent to any interaction component regardless of interface type (i.e., textual or graphical). Using the interface and inheritance concepts of the Java Programming Language and its tools to create graphical user interfaces, it is possible to provide the necessary level of flexibility for the different user types on one side, while ensuring maximum reusability of code on the other side.

Use Cases for Combining Web Services with ArcPython Tools for Enabling Quality Control of Land Remote Sensing Data Products.

NASA Astrophysics Data System (ADS)

Krehbiel, C.; Maiersperger, T.; Friesz, A.; Harriman, L.; Quenzer, R.; Impecoven, K.

2016-12-01

Three major obstacles facing big Earth data users include data storage, management, and analysis. As the amount of satellite remote sensing data increases, so does the need for better data storage and management strategies to exploit the plethora of data now available. Standard GIS tools can help big Earth data users whom interact with and analyze increasingly large and diverse datasets. In this presentation we highlight how NASA's Land Processes Distributed Active Archive Center (LP DAAC) is tackling these big Earth data challenges. We provide a real life use case example to describe three tools and services provided by the LP DAAC to more efficiently exploit big Earth data in a GIS environment. First, we describe the Open-source Project for a Network Data Access Protocol (OPeNDAP), which calls to specific data, minimizing the amount of data that a user downloads and improves the efficiency of data downloading and processing. Next, we cover the LP DAAC's Application for Extracting and Exploring Analysis Ready Samples (AppEEARS), a web application interface for extracting and analyzing land remote sensing data. From there, we review an ArcPython toolbox that was developed to provide quality control services to land remote sensing data products. Locating and extracting specific subsets of larger big Earth datasets improves data storage and management efficiency for the end user, and quality control services provides a straightforward interpretation of big Earth data. These tools and services are beneficial to the GIS user community in terms of standardizing workflows and improving data storage, management, and analysis tactics.

Extension and Higher Education Service-Learning: Toward a Community Development Service-Learning Model

ERIC Educational Resources Information Center

Stoecker, Randy

2014-01-01

This article explores how on-the-ground Extension educators interface with higher education service-learning. Most service-learning in Extension has focused on precollege youth and 4-H. When we look at higher education service-learning and Extension in Wisconsin, we see that there is not as much connection as might be expected. County-based…

Recommended Practices for Interactive Video Portability

DTIC Science & Technology

1990-10-01

3-9 4. Implementation details 4-1 4.1 Installation issues ....................... 4-1 April 15, 1990 Release R 1.0 vii contents 4.1.1 VDI ...passed via an ASCII or binary application interface to the Virtual Device Interface ( VDI ) Management Software. ’ VDI Management, in turn, executes...the commands by calling appropriate low-level services and passes responses back to the application via the application interface. VDI Manage- ment is

An Architecture for Standardized Terminology Services by Wrapping and Integration of Existing Applications

PubMed Central

Cornet, Ronald; Prins, Antoon K.

2003-01-01

Research on terminology services has resulted in development of applications and definition of standards, but has not yet led to widespread use of (standardized) terminology services in practice. Current terminology services offer functionality both for concept representation and lexical knowledge representation, hampering the possibility of combining the strengths of dedicated (concept and lexical) services. We therefore propose an extensible architecture in which concept-related and lexicon-related components are integrated and made available through a uniform interface. This interface can be extended in order to conform to existing standards, making it possible to use dedicated (third-party) components in a standardized way. As a proof of concept and a reference implementation, a SOAP-based Java implementation of the terminology service is being developed, providing wrappers for Protégé and UMLS Knowledge Source Server. Other systems, such as the Description Logic-based reasoner RACER can be easily integrated by implementation of an appropriate wrapper. PMID:14728158

The interoperability skill of the Geographic Portal of the ISPRA - Geological Survey of Italy

NASA Astrophysics Data System (ADS)

Pia Congi, Maria; Campo, Valentina; Cipolloni, Carlo; Delogu, Daniela; Ventura, Renato; Battaglini, Loredana

2010-05-01

The Geographic Portal of Geological Survey of Italy (ISPRA) available at http://serviziogeologico.apat.it/Portal was planning according to standard criteria of the INSPIRE directive. ArcIMS services and at the same time WMS and WFS services had been realized to satisfy the different clients. For each database and web-services the metadata had been wrote in agreement with the ISO 19115. The management architecture of the portal allow it to encode the clients input and output requests both in ArcXML and in GML language. The web-applications and web-services had been realized for each database owner of Land Protection and Georesources Department concerning the geological map at the scale 1:50.000 (CARG Project) and 1:100.000, the IFFI landslide inventory, the boreholes due Law 464/84, the large-scale geological map and all the raster format maps. The portal thus far published is at the experimental stage but through the development of a new graphical interface achieves the final version. The WMS and WFS services including metadata will be re-designed. The validity of the methodology and the applied standards allow to look ahead to the growing developments. In addition to this it must be borne in mind that the capacity of the new geological standard language (GeoSciML), which is already incorporated in the web-services deployed, will be allow a better display and query of the geological data according to the interoperability. The characteristics of the geological data demand for the cartographic mapping specific libraries of symbols not yet available in a WMS service. This is an other aspect regards the standards of the geological informations. Therefore at the moment were carried out: - a library of geological symbols to be used for printing, with a sketch of system colors and a library for displaying data on video, which almost completely solves the problems of the coverage point and area data (also directed) but that still introduces problems for the linear data (solutions: ArcIMS services from Arcmap projects or a specific SLD implementation for WMS services); - an update of "Guidelines for the supply of geological data" in a short time will be published; - the Geological Survey of Italy is officially involved in the IUGS-CGI working group for the processing and experimentation on the new GeoSciML language with the WMS/WFS services. The availability of geographic informations occurs through the metadata that can be distributed online so that search engines can find them through specialized research. The collected metadata in catalogs are structured in a standard (ISO 19135). The catalogs are a ‘common' interface to locate, view and query data and metadata services, web services and other resources. Then, while working in a growing sector of the environmental knowledgement the focus is to collect the participation of other subjects that contribute to the enrichment of the informative content available, so as to be able to arrive to a real portal of national interest especially in case of disaster management.

A haptic interface for virtual simulation of endoscopic surgery.

PubMed

Rosenberg, L B; Stredney, D

1996-01-01

Virtual reality can be described as a convincingly realistic and naturally interactive simulation in which the user is given a first person illusion of being immersed within a computer generated environment While virtual reality systems offer great potential to reduce the cost and increase the quality of medical training, many technical challenges must be overcome before such simulation platforms offer effective alternatives to more traditional training means. A primary challenge in developing effective virtual reality systems is designing the human interface hardware which allows rich sensory information to be presented to users in natural ways. When simulating a given manual procedure, task specific human interface requirements dictate task specific human interface hardware. The following paper explores the design of human interface hardware that satisfies the task specific requirements of virtual reality simulation of Endoscopic surgical procedures. Design parameters were derived through direct cadaver studies and interviews with surgeons. Final hardware design is presented.

Systemic Vulnerabilities in Customer-Premises Equipment (CPE) Routers

DTIC Science & Technology

2017-07-01

equipment (CPE),1 specifically small office/home office (SOHO) routers, has become ubiquitous. CPE routers are notorious for their web interface...and enabling remote management, although all settings controllable over the web -management interface can be manipulated. • 85% (11 of 13) of...specifically small office/home office (SOHO) routers— has become ubiquitous. CPE routers are notorious for their web interface vulnerabilities, old ver- sions

A site-specific approach for assessing the fire risk to structures at the wildland/urban interface

Treesearch

Jack Cohen

1991-01-01

The essence of the wildland/urban interface fire problem is the loss of homes. The problem is not new, but is becoming increasingly important as more homes with inadequate adherence to safety codes are built at the wildland/urban interface. Current regulatory codes are inflexible. Specifications for building and site characteristics cannot be adjusted to accommodate...

Integrating CCSDS Electronic Data Sheets into Flight Software

NASA Technical Reports Server (NTRS)

Wilmot, Jonathan

2017-01-01

This presentation will describe the new CCSDS Spacecraft Onboard Interfaces Services (SOIS) Electronic Data Sheet (EDS) standards and how they are being applied to data interfaces in software frameworks, tool chains, and ground systems across a range of missions at NASA and other agencies.

47 CFR 79.107 - User interfaces provided by digital apparatus.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SERVICES ACCESSIBILITY OF VIDEO PROGRAMMING Apparatus § 79.107 User interfaces provided by digital... States and designed to receive or play back video programming transmitted in digital format simultaneously with sound, including apparatus designed to receive or display video programming transmitted in...

Overview of the joint services lightweight standoff chemical agent detector (JSLSCAD)

NASA Astrophysics Data System (ADS)

Hammond, Barney; Popa, Mirela

2005-05-01

This paper presents a system-level description of the Joint Services Lightweight Standoff Chemical Agent Detector (JSLSCAD). JSLSCAD is a passive Fourier Transform InfraRed (FTIR) based remote sensing system for detecting chemical warfare agents. Unlike predecessor systems, JSLSCAD is capable of operating while on the move to accomplish reconnaissance, surveillance, and contamination avoidance missions. Additionally, the system is designed to meet the needs for application on air and sea as well as ground mobile and fixed site platforms. The core of the system is a rugged Michelson interferometer with a flexure spring bearing mechanism and bi-directional data acquisition capability. The sensor is interfaced to a small, high performance spatial scanner that provides high-speed, two-axis area coverage. Command, control, and processing electronics have been coupled with real time control software and robust detection/discrimination algorithms. Operator interfaces include local and remote options in addition to interfaces to external communications networks. The modular system design facilitates interfacing to the many platforms targeted for JSLSCAD.

Advances in the TRIDEC Cloud

NASA Astrophysics Data System (ADS)

Hammitzsch, Martin; Spazier, Johannes; Reißland, Sven

2016-04-01

The TRIDEC Cloud is a platform that merges several complementary cloud-based services for instant tsunami propagation calculations and automated background computation with graphics processing units (GPU), for web-mapping of hazard specific geospatial data, and for serving relevant functionality to handle, share, and communicate threat specific information in a collaborative and distributed environment. The platform offers a modern web-based graphical user interface so that operators in warning centres and stakeholders of other involved parties (e.g. CPAs, ministries) just need a standard web browser to access a full-fledged early warning and information system with unique interactive features such as Cloud Messages and Shared Maps. Furthermore, the TRIDEC Cloud can be accessed in different modes, e.g. the monitoring mode, which provides important functionality required to act in a real event, and the exercise-and-training mode, which enables training and exercises with virtual scenarios re-played by a scenario player. The software system architecture and open interfaces facilitate global coverage so that the system is applicable for any region in the world and allow the integration of different sensor systems as well as the integration of other hazard types and use cases different to tsunami early warning. Current advances of the TRIDEC Cloud platform will be summarized in this presentation.

Visual Analytics for Law Enforcement: Deploying a Service-Oriented Analytic Framework for Web-based Visualization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dowson, Scott T.; Bruce, Joseph R.; Best, Daniel M.

2009-04-14

This paper presents key components of the Law Enforcement Information Framework (LEIF) that provides communications, situational awareness, and visual analytics tools in a service-oriented architecture supporting web-based desktop and handheld device users. LEIF simplifies interfaces and visualizations of well-established visual analytical techniques to improve usability. Advanced analytics capability is maintained by enhancing the underlying processing to support the new interface. LEIF development is driven by real-world user feedback gathered through deployments at three operational law enforcement organizations in the US. LEIF incorporates a robust information ingest pipeline supporting a wide variety of information formats. LEIF also insulates interface and analyticalmore » components from information sources making it easier to adapt the framework for many different data repositories.« less

Automatic programming of simulation models

NASA Technical Reports Server (NTRS)

Schroer, Bernard J.; Tseng, Fan T.; Zhang, Shou X.; Dwan, Wen S.

1990-01-01

The concepts of software engineering were used to improve the simulation modeling environment. Emphasis was placed on the application of an element of rapid prototyping, or automatic programming, to assist the modeler define the problem specification. Then, once the problem specification has been defined, an automatic code generator is used to write the simulation code. The following two domains were selected for evaluating the concepts of software engineering for discrete event simulation: manufacturing domain and a spacecraft countdown network sequence. The specific tasks were to: (1) define the software requirements for a graphical user interface to the Automatic Manufacturing Programming System (AMPS) system; (2) develop a graphical user interface for AMPS; and (3) compare the AMPS graphical interface with the AMPS interactive user interface.

Component Framework for Loosely Coupled High Performance Integrated Plasma Simulations

NASA Astrophysics Data System (ADS)

Elwasif, W. R.; Bernholdt, D. E.; Shet, A. G.; Batchelor, D. B.; Foley, S.

2010-11-01

We present the design and implementation of a component-based simulation framework for the execution of coupled time-dependent plasma modeling codes. The Integrated Plasma Simulator (IPS) provides a flexible lightweight component model that streamlines the integration of stand alone codes into coupled simulations. Standalone codes are adapted to the IPS component interface specification using a thin wrapping layer implemented in the Python programming language. The framework provides services for inter-component method invocation, configuration, task, and data management, asynchronous event management, simulation monitoring, and checkpoint/restart capabilities. Services are invoked, as needed, by the computational components to coordinate the execution of different aspects of coupled simulations on Massive parallel Processing (MPP) machines. A common plasma state layer serves as the foundation for inter-component, file-based data exchange. The IPS design principles, implementation details, and execution model will be presented, along with an overview of several use cases.

An Ambient Intelligence Framework for the Provision of Geographically Distributed Multimedia Content to Mobility Impaired Users

NASA Astrophysics Data System (ADS)

Kehagias, Dionysios D.; Giakoumis, Dimitris; Tzovaras, Dimitrios; Bekiaris, Evangelos; Wiethoff, Marion

This chapter presents an ambient intelligence framework whose goal is to facilitate the information needs of mobility impaired users on the move. This framework couples users with geographically distributed services and the corresponding multimedia content, enabling access to context-sensitive information based on user geographic location and the use case under consideration. It provides a multi-modal facility that is realized through a set of mobile devices and user interfaces that address the needs of ten different types of user impairments. The overall ambient intelligence framework enables users who are equipped with mobile devices to access multimedia content in order to undertake activities relevant to one or more of the following domains: transportation, tourism and leisure, personal support services, work, business, education, social relations and community building. User experience is being explored against those activities through a specific usage scenario.

Social Circles: A 3D User Interface for Facebook

NASA Astrophysics Data System (ADS)

Rodrigues, Diego; Oakley, Ian

Online social network services are increasingly popular web applications which display large amounts of rich multimedia content: contacts, status updates, photos and event information. Arguing that this quantity of information overwhelms conventional user interfaces, this paper presents Social Circles, a rich interactive visualization designed to support real world users of social network services in everyday tasks such as keeping up with friends and organizing their network. It achieves this by using 3D UIs, fluid animations and a spatial metaphor to enable direct manipulation of a social network.

Architecture Design of Healthcare Software-as-a-Service Platform for Cloud-Based Clinical Decision Support Service

PubMed Central

Oh, Sungyoung; Cha, Jieun; Ji, Myungkyu; Kang, Hyekyung; Kim, Seok; Heo, Eunyoung; Han, Jong Soo; Kang, Hyunggoo; Chae, Hoseok; Hwang, Hee

2015-01-01

Objectives To design a cloud computing-based Healthcare Software-as-a-Service (SaaS) Platform (HSP) for delivering healthcare information services with low cost, high clinical value, and high usability. Methods We analyzed the architecture requirements of an HSP, including the interface, business services, cloud SaaS, quality attributes, privacy and security, and multi-lingual capacity. For cloud-based SaaS services, we focused on Clinical Decision Service (CDS) content services, basic functional services, and mobile services. Microsoft's Azure cloud computing for Infrastructure-as-a-Service (IaaS) and Platform-as-a-Service (PaaS) was used. Results The functional and software views of an HSP were designed in a layered architecture. External systems can be interfaced with the HSP using SOAP and REST/JSON. The multi-tenancy model of the HSP was designed as a shared database, with a separate schema for each tenant through a single application, although healthcare data can be physically located on a cloud or in a hospital, depending on regulations. The CDS services were categorized into rule-based services for medications, alert registration services, and knowledge services. Conclusions We expect that cloud-based HSPs will allow small and mid-sized hospitals, in addition to large-sized hospitals, to adopt information infrastructures and health information technology with low system operation and maintenance costs. PMID:25995962

Evolutionary diversification of protein–protein interactions by interface add-ons

PubMed Central

Plach, Maximilian G.; Semmelmann, Florian; Busch, Florian; Busch, Markus; Heizinger, Leonhard; Wysocki, Vicki H.; Sterner, Reinhard

2017-01-01

Cells contain a multitude of protein complexes whose subunits interact with high specificity. However, the number of different protein folds and interface geometries found in nature is limited. This raises the question of how protein–protein interaction specificity is achieved on the structural level and how the formation of nonphysiological complexes is avoided. Here, we describe structural elements called interface add-ons that fulfill this function and elucidate their role for the diversification of protein–protein interactions during evolution. We identified interface add-ons in 10% of a representative set of bacterial, heteromeric protein complexes. The importance of interface add-ons for protein–protein interaction specificity is demonstrated by an exemplary experimental characterization of over 30 cognate and hybrid glutamine amidotransferase complexes in combination with comprehensive genetic profiling and protein design. Moreover, growth experiments showed that the lack of interface add-ons can lead to physiologically harmful cross-talk between essential biosynthetic pathways. In sum, our complementary in silico, in vitro, and in vivo analysis argues that interface add-ons are a practical and widespread evolutionary strategy to prevent the formation of nonphysiological complexes by specializing protein–protein interactions. PMID:28923934

Delivering Library Services to Remote Students.

ERIC Educational Resources Information Center

Casado, Margaret

2001-01-01

Discusses library services at the University of Tennessee to reach off-campus and distance education students. Topics include online research; email; library instruction for faculty and students; Web interfaces; fax; telephone service; chat technology; the library's Web page; virtual classrooms; library links from a course management system; and…

Intranets: Considerations for the Information Services Manager.

ERIC Educational Resources Information Center

Blackmore, Paul

1997-01-01

This article identifies benefits of using Internet technologies in an organization's intranet or internal information system: ease-of-use, one interface, implementation cost, access, information services (flat content and interactive intranets), support desks (via Web services and e-mail), document management. Discusses the impact of intranets on…

Development of the Telehealth Usability Questionnaire (TUQ).

PubMed

Parmanto, Bambang; Lewis, Allen Nelson; Graham, Kristin M; Bertolet, Marnie H

2016-01-01

Current telehealth usability questionnaires are designed primarily for older technologies, where telehealth interaction is conducted over dedicated videoconferencing applications. However, telehealth services are increasingly conducted over computer-based systems that rely on commercial software and a user supplied computer interface. Therefore, a usability questionnaire that addresses the changes in telehealth service delivery and technology is needed. The Telehealth Usability Questionnaire (TUQ) was developed to evaluate the usability of telehealth implementation and services. This paper addresses: (1) the need for a new measure of telehealth usability, (2) the development of the TUQ, (3) intended uses for the TUQ, and (4) the reliability of the TUQ. Analyses indicate that the TUQ is a solid, robust, and versatile measure that can be used to measure the quality of the computer-based user interface and the quality of the telehealth interaction and services.

Testing and reference model analysis of FTTH system

NASA Astrophysics Data System (ADS)

Feng, Xiancheng; Cui, Wanlong; Chen, Ying

2009-08-01

With rapid development of Internet and broadband access network, the technologies of xDSL, FTTx+LAN , WLAN have more applications, new network service emerges in endless stream, especially the increase of network game, meeting TV, video on demand, etc. FTTH supports all present and future service with enormous bandwidth, including traditional telecommunication service, traditional data service and traditional TV service, and the future digital TV and VOD. With huge bandwidth of FTTH, it wins the final solution of broadband network, becomes the final goal of development of optical access network.. Fiber to the Home (FTTH) will be the goal of telecommunications cable broadband access. In accordance with the development trend of telecommunication services, to enhance the capacity of integrated access network, to achieve triple-play (voice, data, image), based on the existing optical Fiber to the curb (FTTC), Fiber To The Zone (FTTZ), Fiber to the Building (FTTB) user optical cable network, the optical fiber can extend to the FTTH system of end-user by using EPON technology. The article first introduced the basic components of FTTH system; and then explain the reference model and reference point for testing of the FTTH system; Finally, by testing connection diagram, the testing process, expected results, primarily analyze SNI Interface Testing, PON interface testing, Ethernet performance testing, UNI interface testing, Ethernet functional testing, PON functional testing, equipment functional testing, telephone functional testing, operational support capability testing and so on testing of FTTH system. ...

The interface between child/adolescent and adult mental health services: results from a European 28-country survey.

PubMed

Signorini, Giulia; Singh, Swaran P; Marsanic, Vlatka Boricevic; Dieleman, Gwen; Dodig-Ćurković, Katarina; Franic, Tomislav; Gerritsen, Suzanne E; Griffin, James; Maras, Athanasios; McNicholas, Fiona; O'Hara, Lesley; Purper-Ouakil, Diane; Paul, Moli; Russet, Frederick; Santosh, Paramala; Schulze, Ulrike; Street, Cathy; Tremmery, Sabine; Tuomainen, Helena; Verhulst, Frank; Warwick, Jane; de Girolamo, Giovanni

2018-04-01

Transition-related discontinuity of care is a major socioeconomic and societal challenge for the EU. The current service configuration, with distinct Child and Adolescent Mental Health (CAMHS) and Adult Mental Health Services (AMHS), is considered a weak link where the care pathway needs to be most robust. Our aim was to delineate transitional policies and care across Europe and to highlight current gaps in care provision at the service interface. An online mapping survey was conducted across all 28 European Countries using a bespoke instrument: The Standardized Assessment Tool for Mental Health Transition (SATMEHT). The survey was directed at expert(s) in each of the 28 EU countries. The response rate was 100%. Country experts commonly (12/28) reported that between 25 and 49% of CAMHS service users will need transitioning to AMHS. Estimates of the percentage of AMHS users aged under 30 years who had has previous contact with CAMHS were most commonly in the region 20-30% (33% on average).Written policies for managing the interface were available in only four countries and half (14/28) indicated that no transition support services were available. This is the first survey of CAMHS transitional policies and care carried out at a European level. Policymaking on transitional care clearly needs special attention and further elaboration. The Milestone Study on transition should provide much needed data on transition processes and outcomes that could form the basis for improving policy and practice in transitional care.

User interface for a tele-operated robotic hand system

DOEpatents

Crawford, Anthony L

2015-03-24

Disclosed here is a user interface for a robotic hand. The user interface anchors a user's palm in a relatively stationary position and determines various angles of interest necessary for a user's finger to achieve a specific fingertip location. The user interface additionally conducts a calibration procedure to determine the user's applicable physiological dimensions. The user interface uses the applicable physiological dimensions and the specific fingertip location, and treats the user's finger as a two link three degree-of-freedom serial linkage in order to determine the angles of interest. The user interface communicates the angles of interest to a gripping-type end effector which closely mimics the range of motion and proportions of a human hand. The user interface requires minimal contact with the operator and provides distinct advantages in terms of available dexterity, work space flexibility, and adaptability to different users.

Advancements in Data Access at the IRIS Data Management Center to Broaden Data Use

NASA Astrophysics Data System (ADS)

Benson, R. B.; Trabant, C. M.; Ahern, T. K.

2013-12-01

The IRIS Data Management Center (DMC) has been serving digital seismic data for more than 20 years and has offered a variety of access mechanisms that have stood the test of time. However, beginning in 2010, and in response to multiple needs being requested from the IRIS DMC, we have developed web service interfaces to access our primary data repository. These new interfaces have rapidly grown in popularity. In 2013, the third full year of their operation, these services were responsible for half of all the data shipped from the DMC. In the same time period, the amount of data shipped from the other data access mechanisms has also increased. This non-linear growth of data shipments reflects the increased data usage by the research community. We believe that our new web service interfaces are well suited to fit future data access needs and signify a significant evolution in integrating different scientific data sets. Based on standardized web technologies, support for writing access software is ubiquitous. As fundamentally programmatic interfaces, the services are well suited for integration into data processing systems, in particular large-scale data processing systems. Their programmatic nature also makes then well suited for use with brokering systems where, for example, data from multiple disciplines can be integrated. In addition to providing access to raw data, the DMC created web services that apply simple, on-the-fly processing and format conversion. Processing the data (e.g. converting to Earth units) and formatting the result into something generally usable (e.g. ASCII) removes important barriers for users working in other disciplines. The end result is that we are shipping a much larger amount of data in a manner more directly usable by users. Many of these principles will be applied to the DMC's future work in the NSF's EarthCube Web Service Building Blocks project.

Application of open source standards and technologies in the http://climate4impact.eu/ portal

NASA Astrophysics Data System (ADS)

Plieger, Maarten; Som de Cerff, Wim; Pagé, Christian; Tatarinova, Natalia

2015-04-01

This presentation will demonstrate how to calculate and visualize the climate indice SU (number of summer days) on the climate4impact portal. The following topics will be covered during the demonstration: - Security: Login using OpenID for access to the Earth System Grid Fedeation (ESGF) data nodes. The ESGF works in conjunction with several external websites and systems. The climate4impact portal uses X509 based short lived credentials, generated on behalf of the user with a MyProxy service. Single Sign-on (SSO) is used to make these websites and systems work together. - Discovery: Facetted search based on e.g. variable name, model and institute using the ESGF search services. A catalog browser allows for browsing through CMIP5 and any other climate model data catalogues (e.g. ESSENCE, EOBS, UNIDATA). - Processing using Web Processing Services (WPS): Transform data, subset, export into other formats, and perform climate indices calculations using Web Processing Services implemented by PyWPS, based on NCAR NCPP OpenClimateGIS and IS-ENES2 ICCLIM. - Visualization using Web Map Services (WMS): Visualize data from ESGF data nodes using ADAGUC Web Map Services. The aim of climate4impact is to enhance the use of Climate Research Data and to enhance the interaction with climate effect/impact communities. The portal is based on 21 impact use cases from 5 different European countries, and is evaluated by a user panel consisting of use case owners. It has been developed within the European projects IS-ENES and IS-ENES2 for more than 5 years, and its development currently continues within IS-ENES2 and CLIPC. As the climate impact community is very broad, the focus is mainly on the scientific impact community. This work has resulted in the ENES portal interface for climate impact communities and can be visited at http://climate4impact.eu/ The current main objectives for climate4impact can be summarized in two objectives. The first one is to work on a web interface which automatically generates a graphical user interface on WPS endpoints. The WPS calculates climate indices and subset data using OpenClimateGIS/ICCLIM on data stored in ESGF data nodes. Data is then transmitted from ESGF nodes over secured OpenDAP and becomes available in a new, per user, secured OpenDAP server. The results can then be visualized again using ADAGUC WMS. Dedicated wizards for processing of climate indices will be developed in close collaboration with users. The second one is to expose climate4impact services, so as to offer standardized services which can be used by other portals. This has the advantage to add interoperability between several portals, as well as to enable the design of specific portals aimed at different impact communities, either thematic or national, for example.

A coastal information system to propel emerging science and ...

EPA Pesticide Factsheets

The Estuary Data Mapper (EDM) is a free, interactive virtual gateway to coastal data aimed to promote research and aid in environmental management. The graphical user interface allows users to custom select and subset data based on their spatial and temporal interests giving them easy access to visualize, retrieve, and save data for further analysis. Data are accessible across estuarine systems of the Atlantic, Gulf of Mexico and Pacific regions of the United States and includes: (1) time series data including tidal, hydrologic, and weather, (2) water and sediment quality, (3) atmospheric deposition, (4) habitat, (5) coastal exposure indices, (6) historic and projected land-use and population, (7) historic and projected nitrogen and phosphorous sources and load summaries. EDM issues Web Coverage Service Interface Standard queries (WCS; simple, standard one-line text strings) to a public web service to quickly obtain data subsets by variable, for a date-time range and area selected by user. EDM is continuously being enhanced with updated data and new options. Recent additions include a comprehensive suite of nitrogen source and loading data, and inputs for supporting a modeling approach of seagrass habitat. Additions planned for the near future include 1) support for Integrated Water Resources Management cost-benefit analysis, specifically the Watershed Management Optimization Support Tool and 2) visualization of the combined effects of climate change, land-use a

Estuary Data Mapper: A coastal information system to propel ...

EPA Pesticide Factsheets

The Estuary Data Mapper (EDM) is a free, interactive virtual gateway to coastal data aimed to promote research and aid in environmental management. The graphical user interface allows users to custom select and subset data based on their spatial and temporal interests giving them easy access to visualize, retrieve, and save data for further analysis. Data are accessible across estuarine systems of the Atlantic, Gulf of Mexico and Pacific regions of the United States and includes: (1) time series data including tidal, hydrologic, and weather, (2) water and sediment quality, (3) atmospheric deposition, (4) habitat, (5) coastal exposure indices, (6) historic and projected land-use and population, (7) historic and projected nitrogen and phosphorous sources and load summaries. EDM issues Web Coverage Service Interface Standard queries (WCS; simple, standard one-line text strings) to a public web service to quickly obtain data subsets by variable, for a date-time range and area selected by user. EDM is continuously being enhanced with updated data and new options. Recent additions include a comprehensive suite of nitrogen source and loading data, and inputs for supporting a modeling approach of seagrass habitat. Additions planned for the near future include 1) support for Integrated Water Resources Management cost-benefit analysis, specifically the Watershed Management Optimization Support Tool and 2) visualization of the combined effects of climate change, land-use a

Maximizing the use of EO products: how to leverage the potential of open geospatial service architectures

NASA Astrophysics Data System (ADS)

Usländer, Thomas

2012-10-01

The demand for the rapid provision of EO products with well-defined characteristics in terms of temporal, spatial, image-specific and thematic criteria is increasing. Examples are products to support near real-time damage assessment after a natural disaster event, e.g. an earthquake. However, beyond the organizational and economic questions, there are technological and systemic barriers to enable a comfortable search, order, delivery or even combination of EO products. Most portals of space agencies and EO product providers require sophisticated satellite and product knowledge and, even worse, are all different and not interoperable. This paper gives an overview about the use cases and the architectural solutions that aim at an open and flexible EO mission infrastructure with application-oriented user interfaces and well-defined service interfaces based upon open standards. It presents corresponding international initiatives such as INSPIRE (Infrastructure for Spatial Information in the European Community), GMES (Global Monitoring for Environment and Security), GEOSS (Global Earth Observation System of Systems) and HMA (Heterogeneous Missions Accessibility) and their associated infrastructure approaches. The paper presents a corresponding analysis and design methodology and two examples how such architectures are already successfully used in early warning systems for geo-hazards and toolsets for environmentallyinduced health risks. Finally, the paper concludes with an outlook how these ideas relate to the vision of the Future Internet.

SAR Altimetry Processing on Demand Service for Cryosat-2 and Sentinel-3 at ESA G-Pod

NASA Astrophysics Data System (ADS)

Dinardo, Salvatore; Benveniste, Jérôme; Ambrózio, Américo; Restano, Marco

2016-07-01

The G-POD SARvatore service to users for the exploitation of CryoSat-2 data was designed and developed by the Altimetry Team at ESA-ESRIN EOP-SER (Earth Observation - Exploitation, Research and Development). The G-POD service coined SARvatore (SAR Versatile Altimetric Toolkit for Ocean Research & Exploitation) is a web platform that allows any scientist to process on-line, on-demand and with user-selectable configuration CryoSat-2 SAR/SARIN data, from L1a (FBR) data products up to SAR/SARin Level-2 geophysical data products. The Processor takes advantage of the G-POD (Grid Processing On Demand) distributed computing platform (350 CPUs in ~70 Working Nodes) to timely deliver output data products and to interface with ESA-ESRIN FBR data archive (155'000 SAR passes and 41'000 SARin passes). The output data products are generated in standard NetCDF format (using CF Convention), therefore being compatible with the Multi-Mission Radar Altimetry Toolbox (BRAT) and other NetCDF tools. By using the G-POD graphical interface, it is straightforward to select a geographical area of interest within the time-frame related to the Cryosat-2 SAR/SARin FBR data products availability in the service catalogue. The processor prototype is versatile, allowing users to customize and to adapt the processing according to their specific requirements by setting a list of configurable options. After the task submission, users can follow, in real time, the status of the processing, which can be lengthy due to the required intense number-crunching inherent to SAR processing. From the web interface, users can choose to generate experimental SAR data products as stack data and RIP (Range Integrated Power) waveforms. The processing service, initially developed to support the awarded development contracts by confronting the deliverables to ESA's prototype, is now made available to the worldwide SAR Altimetry Community for research & development experiments, for on-site demonstrations/training in training courses and workshops, for cross-comparison to third party products (e.g. CLS/CNES CPP or ESA SAR COP data products), for the preparation of the Sentinel-3 Surface Topography Mission, for producing data and graphics for publications, etc. Initially, the processing was designed and uniquely optimized for open ocean studies. It was based on the SAMOSA model developed for the Sentinel-3 Ground Segment using CryoSat data (Cotton et al., 2008; Ray et al., 2014). However, since June 2015, a new retracker (SAMOSA+) is offered within the service as a dedicated retracker for coastal zone, inland water and sea-ice/ice-sheet. In view of the Sentinel-3 launch, a new flavor of the service will be initiated, exclusively dedicated to the processing of Sentinel-3 mission data products. The scope of this new service will be to maximize the exploitation of the upcoming Sentinel-3 Surface Topography Mission's data over all surfaces. The service is open, free of charge (supported by the ESA SEOM Programme Element) for worldwide scientific applications and available at https://gpod.eo.esa.int/services/CRYOSAT_SAR/

Unified User Interface to Support Effective and Intuitive Data Discovery, Dissemination, and Analysis at NASA GES DISC

NASA Technical Reports Server (NTRS)

Petrenko, M.; Hegde, M.; Bryant, K.; Johnson, J. E.; Ritrivi, A.; Shen, S.; Volmer, B.; Pham, L. B.

2015-01-01

Goddard Earth Sciences Data and Information Services Center (GES DISC) has been providing access to scientific data sets since 1990s. Beginning as one of the first Earth Observing System Data and Information System (EOSDIS) archive centers, GES DISC has evolved to offer a wide range of science-enabling services. With a growing understanding of needs and goals of its science users, GES DISC continues to improve and expand on its broad set of data discovery and access tools, sub-setting services, and visualization tools. Nonetheless, the multitude of the available tools, a partial overlap of functionality, and independent and uncoupled interfaces employed by these tools often leave the end users confused as of what tools or services are the most appropriate for a task at hand. As a result, some the services remain underutilized or largely unknown to the users, significantly reducing the availability of the data and leading to a great loss of scientific productivity. In order to improve the accessibility of GES DISC tools and services, we have designed and implemented UUI, the Unified User Interface. UUI seeks to provide a simple, unified, and intuitive one-stop shop experience for the key services available at GES DISC, including sub-setting (Simple Subset Wizard), granule file search (Mirador), plotting (Giovanni), and other services. In this poster, we will discuss the main lessons, obstacles, and insights encountered while designing the UUI experience. We will also present the architecture and technology behind UUI, including NodeJS, Angular, and Mongo DB, as well as speculate on the future of the tool at GES DISC as well as in a broader context of the Space Science Informatics.

GIANT API: an application programming interface for functional genomics.

PubMed

Roberts, Andrew M; Wong, Aaron K; Fisk, Ian; Troyanskaya, Olga G

2016-07-08

GIANT API provides biomedical researchers programmatic access to tissue-specific and global networks in humans and model organisms, and associated tools, which includes functional re-prioritization of existing genome-wide association study (GWAS) data. Using tissue-specific interaction networks, researchers are able to predict relationships between genes specific to a tissue or cell lineage, identify the changing roles of genes across tissues and uncover disease-gene associations. Additionally, GIANT API enables computational tools like NetWAS, which leverages tissue-specific networks for re-prioritization of GWAS results. The web services covered by the API include 144 tissue-specific functional gene networks in human, global functional networks for human and six common model organisms and the NetWAS method. GIANT API conforms to the REST architecture, which makes it stateless, cacheable and highly scalable. It can be used by a diverse range of clients including web browsers, command terminals, programming languages and standalone apps for data analysis and visualization. The API is freely available for use at http://giant-api.princeton.edu. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

Vandenberg Air Force Base Pressure Gradient Wind Study

NASA Technical Reports Server (NTRS)

Shafer, Jaclyn A.

2013-01-01

Warning category winds can adversely impact day-to-day space lift operations at Vandenberg Air Force Base (VAFB) in California. NASA's Launch Services Program and other programs at VAFB use wind forecasts issued by the 30 Operational Support Squadron Weather Flight (30 OSSWF) to determine if they need to limit activities or protect property such as a launch vehicle. The 30 OSSWF tasked the AMU to develop an automated Excel graphical user interface that includes pressure gradient thresholds between specific observing stations under different synoptic regimes to aid forecasters when issuing wind warnings. This required the AMU to determine if relationships between the variables existed.

Electro-optic architecture for servicing sensors and actuators in advanced aircraft propulsion systems

NASA Technical Reports Server (NTRS)

Poppel, G. L.; Glasheen, W. M.

1989-01-01

A detailed design of a fiber optic propulsion control system, integrating favored sensors and electro-optics architecture is presented. Layouts, schematics, and sensor lists describe an advanced fighter engine system model. Components and attributes of candidate fiber optic sensors are identified, and evaluation criteria are used in a trade study resulting in favored sensors for each measurand. System architectural ground rules were applied to accomplish an electro-optics architecture for the favored sensors. A key result was a considerable reduction in signal conductors. Drawings, schematics, specifications, and printed circuit board layouts describe the detailed system design, including application of a planar optical waveguide interface.

76 FR 70408 - Information Collection; Understanding Value Trade-Offs Regarding Fire Hazard Reduction Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... Regarding Fire Hazard Reduction Programs in the Wildland-Urban Interface AGENCY: Forest Service, USDA... Regarding Fire Hazard Reduction Programs in the Wildland-Urban Interface. DATES: Comments must be received... holidays. SUPPLEMENTARY INFORMATION: Title: Understanding Value Trade-offs Regarding Fire Hazard Reduction...

Description of CRIB, the GIPSY retrieval mechanism, and the interface to the General Electric MARK III Service : CRIB, the mineral resources data bank of the U.S. Geological Survey--guide for public users, 1977

USGS Publications Warehouse

Calkins, James Alfred; Keefer, Eleanor K.; Ofsharick, Regina A.; Mason, George T.; Tracy, Patricia; Atkins, Mary

1978-01-01

The U.S. Geological Survey's Computerized Resources Information Bank (CRIB) is being made available for public use through the computer facilities of the University of Oklahoma and the General Electric Company, U.S.A. The use of General Electric's worldwide information-services network provides access to the CRIB file to a worldwide clientele. This manual, which consists of two chapters, is intended as a guide to users who wish to interrogate the file. Chapter A contains a description of the CRIB file, information on the use of the GIPSY retrieval system, and a description of the General Electric MARK III Service. Chapter B contains a description of the individual data items in the CRIB record as well as code lists. CRIB consists of a set of variable-length records on the metallic and nonmetallic mineral resources of the United States and other countries. At present, 31,645 records in the master file are being made available. The record contains information on mineral deposits and mineral commodities. Some topics covered are: deposit name, location, commodity information, description of deposit, geology, production, reserves, potential resources, and references. The data are processed by the GIPSY program, which maintains the data file and builds, updates, searches, and prints the records using simple yet versatile command statements. Searching and selecting records is accomplished by specifying the presence, absence, or content of any element of information in the record; these specifications can be logically linked to prepare sophisticated search strategies. Output is available in the form of the complete record, a listing of selected parts of the record, or fixed-field tabulations. The General Electric MARK III Service is a computerized information services network operating internationally by land lines, satellites, and undersea cables. The service is available by local telephone to 500 cities in North America, Western Europe, Australia, Southeast Asia, Japan, and Saudi Arabia. An interface called the 'foreground driver' is used to link the GIPSY program to the General Electric system.

Epilepsy in Ireland: towards the primary-tertiary care continuum.

PubMed

Varley, Jarlath; Delanty, Norman; Normand, Charles; Coyne, Imelda; McQuaid, Louise; Collins, Claire; Boland, Michael; Grimson, Jane; Fitzsimons, Mary

2010-01-01

Epilepsy is a chronic neurological disease affecting people of every age, gender, race and socio-economic background. The diagnosis and optimal management relies on contribution from a number of healthcare disciplines in a variety of healthcare settings. To explore the interface between primary care and specialist epilepsy services in Ireland. Using appreciative inquiry, focus groups were held with healthcare professionals (n=33) from both primary and tertiary epilepsy specialist services in Ireland. There are significant challenges to delivering a consistent high standard of epilepsy care in Ireland. The barriers that were identified are: the stigma of epilepsy, unequal access to care services, insufficient human resources, unclear communication between primary-tertiary services and lack of knowledge. Improving the management of people with epilepsy requires reconfiguration of the primary-tertiary interface and establishing clearly defined roles and formalised clinical pathways. Such initiatives require resources in the form of further education and training and increased usage of information communication technology (ICT). Epilepsy services across the primary-tertiary interface can be significantly enhanced through the implementation of a shared model of care underpinned by an electronic patient record (EPR) system and information communication technology (ICT). Better chronic disease management has the potential to halt the progression of epilepsy with ensuing benefits for patients and the healthcare system. Copyright 2009 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

Automation of the CAS Document Delivery Service.

ERIC Educational Resources Information Center

Steensland, M. C.; Soukup, K. M.

1986-01-01

The automation of online order retrieval for Chemical Abstracts Service Document Delivery Service was accomplished by shifting to an order retrieval/dispatch process linked to a Unix network. The Unix-based environment, its terminal emulation, page-break, and user-friendly interface software, and later enhancements are reviewed. Resultant increase…

BOWS (bioinformatics open web services) to centralize bioinformatics tools in web services.

PubMed

Velloso, Henrique; Vialle, Ricardo A; Ortega, J Miguel

2015-06-02

Bioinformaticians face a range of difficulties to get locally-installed tools running and producing results; they would greatly benefit from a system that could centralize most of the tools, using an easy interface for input and output. Web services, due to their universal nature and widely known interface, constitute a very good option to achieve this goal. Bioinformatics open web services (BOWS) is a system based on generic web services produced to allow programmatic access to applications running on high-performance computing (HPC) clusters. BOWS intermediates the access to registered tools by providing front-end and back-end web services. Programmers can install applications in HPC clusters in any programming language and use the back-end service to check for new jobs and their parameters, and then to send the results to BOWS. Programs running in simple computers consume the BOWS front-end service to submit new processes and read results. BOWS compiles Java clients, which encapsulate the front-end web service requisitions, and automatically creates a web page that disposes the registered applications and clients. Bioinformatics open web services registered applications can be accessed from virtually any programming language through web services, or using standard java clients. The back-end can run in HPC clusters, allowing bioinformaticians to remotely run high-processing demand applications directly from their machines.

Technology insertion of a COTS RAID server as an image buffer in the image chain of the Defense Mapping Agency's Digital Production System

NASA Astrophysics Data System (ADS)

Mehring, James W.; Thomas, Scott D.

1995-11-01

The Data Services Segment of the Defense Mapping Agency's Digital Production System provides a digital archive of imagery source data for use by DMA's cartographic user's. This system was developed in the mid-1980's and is currently undergoing modernization. This paper addresses the modernization of the imagery buffer function that was performed by custom hardware in the baseline system and is being replaced by a RAID Server based on commercial off the shelf (COTS) hardware. The paper briefly describes the baseline DMA image system and the modernization program, that is currently under way. Throughput benchmark measurements were made to make design configuration decisions for a commercial off the shelf (COTS) RAID Server to perform as system image buffer. The test program began with performance measurements of the RAID read and write operations between the RAID arrays and the server CPU for RAID levels 0, 5 and 0+1. Interface throughput measurements were made for the HiPPI interface between the RAID Server and the image archive and processing system as well as the client side interface between a custom interface board that provides the interface between the internal bus of the RAID Server and the Input- Output Processor (IOP) external wideband network currently in place in the DMA system to service client workstations. End to end measurements were taken from the HiPPI interface through the RAID write and read operations to the IOP output interface.

A computerized aircraft battery servicing facility

NASA Technical Reports Server (NTRS)

Glover, Richard D.

1992-01-01

The latest upgrade to the Aerospace Energy Systems Laboratory (AESL) is described. The AESL is a distributed digital system consisting of a central system and battery servicing stations connected by a high-speed serial data bus. The entire system is located in two adjoining rooms; the bus length is approximately 100 ft. Each battery station contains a digital processor, data acquisition, floppy diskette data storage, and operator interfaces. The operator initiates a servicing task and thereafter the battery station monitors the progress of the task and terminates it at the appropriate time. The central system provides data archives, manages the data bus, and provides a timeshare interface for multiple users. The system also hosts software production tools for the battery stations and the central system.

Evolving the Land Information System into a Cloud Computing Service

DOE Office of Scientific and Technical Information (OSTI.GOV)

Houser, Paul R.

The Land Information System (LIS) was developed to use advanced flexible land surface modeling and data assimilation frameworks to integrate extremely large satellite- and ground-based observations with advanced land surface models to produce continuous high-resolution fields of land surface states and fluxes. The resulting fields are extremely useful for drought and flood assessment, agricultural planning, disaster management, weather and climate forecasting, water resources assessment, and the like. We envisioned transforming the LIS modeling system into a scientific cloud computing-aware web and data service that would allow clients to easily setup and configure for use in addressing large water management issues.more » The focus of this Phase 1 project was to determine the scientific, technical, commercial merit and feasibility of the proposed LIS-cloud innovations that are currently barriers to broad LIS applicability. We (a) quantified the barriers to broad LIS utility and commercialization (high performance computing, big data, user interface, and licensing issues); (b) designed the proposed LIS-cloud web service, model-data interface, database services, and user interfaces; (c) constructed a prototype LIS user interface including abstractions for simulation control, visualization, and data interaction, (d) used the prototype to conduct a market analysis and survey to determine potential market size and competition, (e) identified LIS software licensing and copyright limitations and developed solutions, and (f) developed a business plan for development and marketing of the LIS-cloud innovation. While some significant feasibility issues were found in the LIS licensing, overall a high degree of LIS-cloud technical feasibility was found.« less

78 FR 59099 - Agency Information Collection (VA Loan Electronic Reporting Interface (VALERI) System) Activity...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

... Information and Regulatory Affairs, Office of Management and Budget, Attn: VA Desk Officer; 725 17th St. NW....'' SUPPLEMENTARY INFORMATION: Title: VA Loan Electronic Reporting Interface (VALERI) System. OMB Control Number... information submitted through the VALERI system to perform supplemental servicing, determination on...

Space Generic Open Avionics Architecture (SGOAA) reference model technical guide

NASA Technical Reports Server (NTRS)

Wray, Richard B.; Stovall, John R.

1993-01-01

This report presents a full description of the Space Generic Open Avionics Architecture (SGOAA). The SGOAA consists of a generic system architecture for the entities in spacecraft avionics, a generic processing architecture, and a six class model of interfaces in a hardware/software system. The purpose of the SGOAA is to provide an umbrella set of requirements for applying the generic architecture interface model to the design of specific avionics hardware/software systems. The SGOAA defines a generic set of system interface points to facilitate identification of critical interfaces and establishes the requirements for applying appropriate low level detailed implementation standards to those interface points. The generic core avionics system and processing architecture models provided herein are robustly tailorable to specific system applications and provide a platform upon which the interface model is to be applied.

Crew interface specifications preparation for in-flight maintenance and stowage functions

NASA Technical Reports Server (NTRS)

Parker, F. W.; Carlton, B. E.

1972-01-01

The findings and data products developed during the Phase 2 crew interface specification study are presented. Five new NASA general specifications were prepared: operations location coding system for crew interfaces; loose equipment and stowage management requirements; loose equipment and stowage data base information requirements; spacecraft loose equipment stowage drawing requirements; and inflight stowage management data requirements. Additional data was developed defining inflight maintenance processes and related data concepts for inflight troubleshooting, remove/repair/replace and scheduled maintenance activities. The process of maintenance task and equipment definition during spacecraft design and development was also defined and related data concepts were identified for futher development into formal NASA specifications during future follow-on study phases of the contract.

Fingerstroke time estimates for touchscreen-based mobile gaming interaction.

PubMed

Lee, Ahreum; Song, Kiburm; Ryu, Hokyoung Blake; Kim, Jieun; Kwon, Gyuhyun

2015-12-01

The growing popularity of gaming applications and ever-faster mobile carrier networks have called attention to an intriguing issue that is closely related to command input performance. A challenging mirroring game service, which simultaneously provides game service to both PC and mobile phone users, allows them to play games against each other with very different control interfaces. Thus, for efficient mobile game design, it is essential to apply a new predictive model for measuring how potential touch input compares to the PC interfaces. The present study empirically tests the keystroke-level model (KLM) for predicting the time performance of basic interaction controls on the touch-sensitive smartphone interface (i.e., tapping, pointing, dragging, and flicking). A modified KLM, tentatively called the fingerstroke-level model (FLM), is proposed using time estimates on regression models. Copyright © 2015 Elsevier B.V. All rights reserved.

Migration of the ATLAS Metadata Interface (AMI) to Web 2.0 and cloud

NASA Astrophysics Data System (ADS)

Odier, J.; Albrand, S.; Fulachier, J.; Lambert, F.

2015-12-01

The ATLAS Metadata Interface (AMI), a mature application of more than 10 years of existence, is currently under adaptation to some recently available technologies. The web interfaces, which previously manipulated XML documents using XSL transformations, are being migrated to Asynchronous JavaScript (AJAX). Web development is considerably simplified by the introduction of a framework based on JQuery and Twitter Bootstrap. Finally, the AMI services are being migrated to an OpenStack cloud infrastructure.

US NDC Modernization: Service Oriented Architecture Study Status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamlet, Benjamin R.; Encarnacao, Andre Villanova; Harris, James M.

2014-12-01

This report is a progress update on the USNDC Modernization Service Oriented Architecture (SOA) study describing results from Inception Iteration 1, which occurred between October 2012 and March 2013. The goals during this phase are 1) discovering components of the system that have potential service implementations, 2) identifying applicable SOA patterns for data access, service interfaces, and service orchestration/choreography, and 3) understanding performance tradeoffs for various SOA patterns

A Data Services Upgrade for Advanced Composition Explorer (ACE) Data

NASA Astrophysics Data System (ADS)

Davis, A. J.; Hamell, G.

2008-12-01

Since early in 1998, NASA's Advanced Composition Explorer (ACE) spacecraft has provided continuous measurements of solar wind, interplanetary magnetic field, and energetic particle activity from L1, located approximately 0.01 AU sunward of Earth. The spacecraft has enough fuel to stay in orbit about L1 until ~2024. The ACE Science Center (ASC) provides access to ACE data, and performs level 1 and browse data processing for the science instruments. Thanks to a NASA Data Services Upgrade grant, we have recently retooled our legacy web interface to ACE data, enhancing data subsetting capabilities and improving online plotting options. We have also integrated a new application programming interface (API) and we are working to ensure that it will be compatible with emerging Virtual Observatory (VO) data services standards. The new API makes extensive use of metadata created using the Space Physics Archive Search and Extract (SPASE) data model. We describe these recent improvements to the ACE Science Center data services, and our plans for integrating these services into the VO system.

ICT Services for Life Improvement for the Elderly.

PubMed

Sánchez-Rico, Alejandro; Garel, Pascal; Notarangelo, Isabella; Quintana, Marcos; Hernández, Gustavo; Asteriadis, Stylianos; Popa, Mirela; Vretos, Nicholas; Solachidis, Vassilis; Burgos, Marta; Girault, Ariane

2017-01-01

Integrated care ICT Platform to support patients, care-givers and health/social professionals in the care of dementia and Parkinson's disease with training, empowerment, sensor-based data analysis and cooperation services based on user-friendly interfaces.

Dynamic User Interfaces for Service Oriented Architectures in Healthcare.

PubMed

Schweitzer, Marco; Hoerbst, Alexander

2016-01-01

Electronic Health Records (EHRs) play a crucial role in healthcare today. Considering a data-centric view, EHRs are very advanced as they provide and share healthcare data in a cross-institutional and patient-centered way adhering to high syntactic and semantic interoperability. However, the EHR functionalities available for the end users are rare and hence often limited to basic document query functions. Future EHR use necessitates the ability to let the users define their needed data according to a certain situation and how this data should be processed. Workflow and semantic modelling approaches as well as Web services provide means to fulfil such a goal. This thesis develops concepts for dynamic interfaces between EHR end users and a service oriented eHealth infrastructure, which allow the users to design their flexible EHR needs, modeled in a dynamic and formal way. These are used to discover, compose and execute the right Semantic Web services.

Customizable scientific web-portal for DIII-D nuclear fusion experiment

NASA Astrophysics Data System (ADS)

Abla, G.; Kim, E. N.; Schissel, D. P.

2010-04-01

Increasing utilization of the Internet and convenient web technologies has made the web-portal a major application interface for remote participation and control of scientific instruments. While web-portals have provided a centralized gateway for multiple computational services, the amount of visual output often is overwhelming due to the high volume of data generated by complex scientific instruments and experiments. Since each scientist may have different priorities and areas of interest in the experiment, filtering and organizing information based on the individual user's need can increase the usability and efficiency of a web-portal. DIII-D is the largest magnetic nuclear fusion device in the US. A web-portal has been designed to support the experimental activities of DIII-D researchers worldwide. It offers a customizable interface with personalized page layouts and list of services for users to select. Each individual user can create a unique working environment to fit his own needs and interests. Customizable services are: real-time experiment status monitoring, diagnostic data access, interactive data analysis and visualization. The web-portal also supports interactive collaborations by providing collaborative logbook, and online instant announcement services. The DIII-D web-portal development utilizes multi-tier software architecture, and Web 2.0 technologies and tools, such as AJAX and Django, to develop a highly-interactive and customizable user interface.

National Geothermal Data System: Open Access to Geoscience Data, Maps, and Documents

NASA Astrophysics Data System (ADS)

Caudill, C. M.; Richard, S. M.; Musil, L.; Sonnenschein, A.; Good, J.

2014-12-01

The U.S. National Geothermal Data System (NGDS) provides free open access to millions of geoscience data records, publications, maps, and reports via distributed web services to propel geothermal research, development, and production. NGDS is built on the US Geoscience Information Network (USGIN) data integration framework, which is a joint undertaking of the USGS and the Association of American State Geologists (AASG), and is compliant with international standards and protocols. NGDS currently serves geoscience information from 60+ data providers in all 50 states. Free and open source software is used in this federated system where data owners maintain control of their data. This interactive online system makes geoscience data easily discoverable, accessible, and interoperable at no cost to users. The dynamic project site http://geothermaldata.org serves as the information source and gateway to the system, allowing data and applications discovery and availability of the system's data feed. It also provides access to NGDS specifications and the free and open source code base (on GitHub), a map-centric and library style search interface, other software applications utilizing NGDS services, NGDS tutorials (via YouTube and USGIN site), and user-created tools and scripts. The user-friendly map-centric web-based application has been created to support finding, visualizing, mapping, and acquisition of data based on topic, location, time, provider, or key words. Geographic datasets visualized through the map interface also allow users to inspect the details of individual GIS data points (e.g. wells, geologic units, etc.). In addition, the interface provides the information necessary for users to access the GIS data from third party software applications such as GoogleEarth, UDig, and ArcGIS. A redistributable, free and open source software package called GINstack (USGIN software stack) was also created to give data providers a simple way to release data using interoperable and shareable standards, upload data and documents, and expose those data as a node in the NGDS or any larger data system through a CSW endpoint. The easy-to-use interface is supported by back-end software including Postgres, GeoServer, and custom CKAN extensions among others.

Microprocessor-based interface for oceanography

NASA Technical Reports Server (NTRS)

Hansen, G. R.

1979-01-01

Ocean floor imaging system incorporates five identical microprocessor-based interface units each assigned to specific sonar instrument to simplify system. Central control module based on same microprocessor eliminates need for custom tailoring hardware interfaces for each instrument.

An Interface for Specifying Rigid-Body Motions for CFD Applications

NASA Technical Reports Server (NTRS)

Murman, Scott M.; Chan, William; Aftosmis, Michael; Meakin, Robert L.; Kwak, Dochan (Technical Monitor)

2003-01-01

An interface for specifying rigid-body motions for CFD applications is presented. This interface provides a means of describing a component hierarchy in a geometric configuration, as well as the motion (prescribed or six-degree-of-freedom) associated with any component. The interface consists of a general set of datatypes, along with rules for their interaction, and is designed to be flexible in order to evolve as future needs dictate. The specification is currently implemented with an XML file format which is portable across platforms and applications. The motion specification is capable of describing general rigid body motions, and eliminates the need to write and compile new code within the application software for each dynamic configuration, allowing client software to automate dynamic simulations. The interface is integrated with a GUI tool which allows rigid body motions to be prescribed and verified interactively, promoting access to non-expert users. Illustrative examples, as well as the raw XML source of the file specifications, are included.

The Earth Observatory Natural Event Tracker (EONET): An API for Matching Natural Events to GIBS Imagery

NASA Astrophysics Data System (ADS)

Ward, K.

2015-12-01

Hidden within the terabytes of imagery in NASA's Global Imagery Browse Services (GIBS) collection are hundreds of daily natural events. Some events are newsworthy, devastating, and visibly obvious at a global scale, others are merely regional curiosities. Regardless of the scope and significance of any one event, it is likely that multiple GIBS layers can be viewed to provide a multispectral, dataset-based view of the event. To facilitate linking between the discrete event and the representative dataset imagery, NASA's Earth Observatory Group has developed a prototype application programming interface (API): the Earth Observatory Natural Event Tracker (EONET). EONET supports an API model that allows users to retrieve event-specific metadata--date/time, location, and type (wildfire, storm, etc.)--and web service layer-specific metadata which can be used to link to event-relevant dataset imagery in GIBS. GIBS' ability to ingest many near real time datasets, combined with its growing archive of past imagery, means that API users will be able to develop client applications that not only show ongoing events but can also look at imagery from before and after. In our poster, we will present the API and show examples of its use.

STAR Online Meta-Data Collection Framework: Integration with the Pre-existing Controls Infrastructure

NASA Astrophysics Data System (ADS)

Arkhipkin, D.; Lauret, J.

2017-10-01

One of the STAR experiment’s modular Messaging Interface and Reliable Architecture framework (MIRA) integration goals is to provide seamless and automatic connections with the existing control systems. After an initial proof of concept and operation of the MIRA system as a parallel data collection system for online use and real-time monitoring, the STAR Software and Computing group is now working on the integration of Experimental Physics and Industrial Control System (EPICS) with MIRA’s interfaces. This integration goals are to allow functional interoperability and, later on, to replace the existing/legacy Detector Control System components at the service level. In this report, we describe the evolutionary integration process and, as an example, will discuss the EPICS Alarm Handler conversion. We review the complete upgrade procedure starting with the integration of EPICS-originated alarm signals propagation into MIRA, followed by the replacement of the existing operator interface based on Motif Editor and Display Manager (MEDM) with modern portable web-based Alarm Handler interface. To achieve this aim, we have built an EPICS-to-MQTT [8] bridging service, and recreated the functionality of the original Alarm Handler using low-latency web messaging technologies. The integration of EPICS alarm handling into our messaging framework allowed STAR to improve the DCS alarm awareness of existing STAR DAQ and RTS services, which use MIRA as a primary source of experiment control information.

Development of a web service for analysis in a distributed network.

PubMed

Jiang, Xiaoqian; Wu, Yuan; Marsolo, Keith; Ohno-Machado, Lucila

2014-01-01

We describe functional specifications and practicalities in the software development process for a web service that allows the construction of the multivariate logistic regression model, Grid Logistic Regression (GLORE), by aggregating partial estimates from distributed sites, with no exchange of patient-level data. We recently developed and published a web service for model construction and data analysis in a distributed environment. This recent paper provided an overview of the system that is useful for users, but included very few details that are relevant for biomedical informatics developers or network security personnel who may be interested in implementing this or similar systems. We focus here on how the system was conceived and implemented. We followed a two-stage development approach by first implementing the backbone system and incrementally improving the user experience through interactions with potential users during the development. Our system went through various stages such as concept proof, algorithm validation, user interface development, and system testing. We used the Zoho Project management system to track tasks and milestones. We leveraged Google Code and Apache Subversion to share code among team members, and developed an applet-servlet architecture to support the cross platform deployment. During the development process, we encountered challenges such as Information Technology (IT) infrastructure gaps and limited team experience in user-interface design. We figured out solutions as well as enabling factors to support the translation of an innovative privacy-preserving, distributed modeling technology into a working prototype. Using GLORE (a distributed model that we developed earlier) as a pilot example, we demonstrated the feasibility of building and integrating distributed modeling technology into a usable framework that can support privacy-preserving, distributed data analysis among researchers at geographically dispersed institutes.

Development of a Web Service for Analysis in a Distributed Network

PubMed Central

Jiang, Xiaoqian; Wu, Yuan; Marsolo, Keith; Ohno-Machado, Lucila

2014-01-01

Objective: We describe functional specifications and practicalities in the software development process for a web service that allows the construction of the multivariate logistic regression model, Grid Logistic Regression (GLORE), by aggregating partial estimates from distributed sites, with no exchange of patient-level data. Background: We recently developed and published a web service for model construction and data analysis in a distributed environment. This recent paper provided an overview of the system that is useful for users, but included very few details that are relevant for biomedical informatics developers or network security personnel who may be interested in implementing this or similar systems. We focus here on how the system was conceived and implemented. Methods: We followed a two-stage development approach by first implementing the backbone system and incrementally improving the user experience through interactions with potential users during the development. Our system went through various stages such as concept proof, algorithm validation, user interface development, and system testing. We used the Zoho Project management system to track tasks and milestones. We leveraged Google Code and Apache Subversion to share code among team members, and developed an applet-servlet architecture to support the cross platform deployment. Discussion: During the development process, we encountered challenges such as Information Technology (IT) infrastructure gaps and limited team experience in user-interface design. We figured out solutions as well as enabling factors to support the translation of an innovative privacy-preserving, distributed modeling technology into a working prototype. Conclusion: Using GLORE (a distributed model that we developed earlier) as a pilot example, we demonstrated the feasibility of building and integrating distributed modeling technology into a usable framework that can support privacy-preserving, distributed data analysis among researchers at geographically dispersed institutes. PMID:25848586

An Analysis of Cloud Computing with Amazon Web Services for the Atmospheric Science Data Center

NASA Astrophysics Data System (ADS)

Gleason, J. L.; Little, M. M.

2013-12-01

NASA science and engineering efforts rely heavily on compute and data handling systems. The nature of NASA science data is such that it is not restricted to NASA users, instead it is widely shared across a globally distributed user community including scientists, educators, policy decision makers, and the public. Therefore NASA science computing is a candidate use case for cloud computing where compute resources are outsourced to an external vendor. Amazon Web Services (AWS) is a commercial cloud computing service developed to use excess computing capacity at Amazon, and potentially provides an alternative to costly and potentially underutilized dedicated acquisitions whenever NASA scientists or engineers require additional data processing. AWS desires to provide a simplified avenue for NASA scientists and researchers to share large, complex data sets with external partners and the public. AWS has been extensively used by JPL for a wide range of computing needs and was previously tested on a NASA Agency basis during the Nebula testing program. Its ability to support the Langley Science Directorate needs to be evaluated by integrating it with real world operational needs across NASA and the associated maturity that would come with that. The strengths and weaknesses of this architecture and its ability to support general science and engineering applications has been demonstrated during the previous testing. The Langley Office of the Chief Information Officer in partnership with the Atmospheric Sciences Data Center (ASDC) has established a pilot business interface to utilize AWS cloud computing resources on a organization and project level pay per use model. This poster discusses an effort to evaluate the feasibility of the pilot business interface from a project level perspective by specifically using a processing scenario involving the Clouds and Earth's Radiant Energy System (CERES) project.

Activity-Centric Approach to Distributed Programming

NASA Technical Reports Server (NTRS)

Levy, Renato; Satapathy, Goutam; Lang, Jun

2004-01-01

The first phase of an effort to develop a NASA version of the Cybele software system has been completed. To give meaning to even a highly abbreviated summary of the modifications to be embodied in the NASA version, it is necessary to present the following background information on Cybele: Cybele is a proprietary software infrastructure for use by programmers in developing agent-based application programs [complex application programs that contain autonomous, interacting components (agents)]. Cybele provides support for event handling from multiple sources, multithreading, concurrency control, migration, and load balancing. A Cybele agent follows a programming paradigm, called activity-centric programming, that enables an abstraction over system-level thread mechanisms. Activity centric programming relieves application programmers of the complex tasks of thread management, concurrency control, and event management. In order to provide such functionality, activity-centric programming demands support of other layers of software. This concludes the background information. In the first phase of the present development, a new architecture for Cybele was defined. In this architecture, Cybele follows a modular service-based approach to coupling of the programming and service layers of software architecture. In a service-based approach, the functionalities supported by activity-centric programming are apportioned, according to their characteristics, among several groups called services. A well-defined interface among all such services serves as a path that facilitates the maintenance and enhancement of such services without adverse effect on the whole software framework. The activity-centric application-program interface (API) is part of a kernel. The kernel API calls the services by use of their published interface. This approach makes it possible for any application code written exclusively under the API to be portable for any configuration of Cybele.

A Flexible Component based Access Control Architecture for OPeNDAP Services

NASA Astrophysics Data System (ADS)

Kershaw, Philip; Ananthakrishnan, Rachana; Cinquini, Luca; Lawrence, Bryan; Pascoe, Stephen; Siebenlist, Frank

2010-05-01

Network data access services such as OPeNDAP enable widespread access to data across user communities. However, without ready means to restrict access to data for such services, data providers and data owners are constrained from making their data more widely available. Even with such capability, the range of different security technologies available can make interoperability between services and user client tools a challenge. OPeNDAP is a key data access service in the infrastructure under development to support the CMIP5 (Couple Model Intercomparison Project Phase 5). The work is being carried out as part of an international collaboration including the US Earth System Grid and Curator projects and the EU funded IS-ENES and Metafor projects. This infrastructure will bring together Petabytes of climate model data and associated metadata from over twenty modelling centres around the world in a federation with a core archive mirrored at three data centres. A security system is needed to meet the requirements of organisations responsible for model data including the ability to restrict data access to registered users, keep them up to date with changes to data and services, audit access and protect finite computing resources. Individual organisations have existing tools and services such as OPeNDAP with which users in the climate research community are already familiar. The security system should overlay access control in a way which maintains the usability and ease of access to these services. The BADC (British Atmospheric Data Centre) has been working in collaboration with the Earth System Grid development team and partner organisations to develop the security architecture. OpenID and MyProxy were selected at an early stage in the ESG project to provide single sign-on capability across the federation of participating organisations. Building on the existing OPeNDAP specification an architecture based on pluggable server side components has been developed at the BADC. These components filter requests to the service they protect and apply the required authentication and authorisation schemes. Filters have been developed for OpenID and SSL client based authentication. The latter enabling access with MyProxy issued credentials. By preserving a clear separation between the security and application functionality, multiple authentication technologies may be supported without the need for modification to the underlying OPeNDAP application. The software has been developed in the Python programming language securing the Python based OPeNDAP implementation, PyDAP. This utilises the Python WSGI (Web Server Gateway Interface) specification to create distinct security filter components. Work is also currently underway to develop a parallel Java based filter implementation to secure the THREDDS Data Server. Whilst the ability to apply this flexible approach to the server side security layer is important, the development of compatible client software is vital to the take up of these services across a wide user base. To date PyDAP and wget based clients have been tested and work is planned to integrate the required security interface into the netCDF API. This forms part of ongoing collaboration with the OPeNDAP user and development community to ensure interoperability.

Secure and Resilient Cloud Computing for the Department of Defense

DTIC Science & Technology

2015-11-16

platform as a service (PaaS), and software as a service ( SaaS )—that target system administrators, developers, and end-users respectively (see Table 2...interfaces (API) and services Medium Amazon Elastic MapReduce, MathWorks Cloud, Red Hat OpenShift SaaS Full-fledged applications Low Google gMail

The adoption of Firm-Hosted Online Communities: an empirical investigation into the role of service quality and social interactions

NASA Astrophysics Data System (ADS)

Corkindale, David; Ram, Jiwat; Chen, Howard

2018-02-01

Online communities are a powerful device for collaborative creativity and innovation. Developments in Web 2.0 technologies have given rise to such interactions through firm-hosted online communities (FHOCs) - firm-run online information services that also provide self-help to a community. We devise a model that seeks to explain the factors that encourage people to become members of a FHOC and test the model using structural equation modelling based on data collected from 511 users of a FHOC. The study finds that: (a) an understanding of Perceived Usefulness (PU) plays a mediating role between Behavioural Intention (BI) to adopt FHOC and Trust, as well as Interface design; b) Networking among users has an indirect effect on BI; and c) design of the Interface has a direct influence on BI. A managerial implication is that Networking plays a role in the way supplementary services, including blogs and discussion forums, are perceived. Theoretically, when service quality is decomposed into components such as core services and supplementary services, it also positively influences PU.

A service-oriented architecture for integrating the modeling and formal verification of genetic regulatory networks

PubMed Central

2009-01-01

Background The study of biological networks has led to the development of increasingly large and detailed models. Computer tools are essential for the simulation of the dynamical behavior of the networks from the model. However, as the size of the models grows, it becomes infeasible to manually verify the predictions against experimental data or identify interesting features in a large number of simulation traces. Formal verification based on temporal logic and model checking provides promising methods to automate and scale the analysis of the models. However, a framework that tightly integrates modeling and simulation tools with model checkers is currently missing, on both the conceptual and the implementational level. Results We have developed a generic and modular web service, based on a service-oriented architecture, for integrating the modeling and formal verification of genetic regulatory networks. The architecture has been implemented in the context of the qualitative modeling and simulation tool GNA and the model checkers NUSMV and CADP. GNA has been extended with a verification module for the specification and checking of biological properties. The verification module also allows the display and visual inspection of the verification results. Conclusions The practical use of the proposed web service is illustrated by means of a scenario involving the analysis of a qualitative model of the carbon starvation response in E. coli. The service-oriented architecture allows modelers to define the model and proceed with the specification and formal verification of the biological properties by means of a unified graphical user interface. This guarantees a transparent access to formal verification technology for modelers of genetic regulatory networks. PMID:20042075

Bitsy Thinks Big

NASA Technical Reports Server (NTRS)

2001-01-01

AeroAstro, of Herndon, Virginia, developed a nanospacecraft core module capable of developing recyclable spacecraft designs using standard interfaces. From this core module, known as the Bitsy(TM) kernel, custom spacecraft are able to connect mission-specific instruments and subsystems for variation in mission usage. The nanospacecraft core module may be used in conjunction with an existing microsatellite bus or customized to meet specific requirements. Building on this premise, AeroAstro has developed a line of satellite communications equipment, sun sensors, and Lithium-Ion batteries which are all incorporated in its complete line of mission-specific nanospacecraft. The Bitsy technology is also a key component in AeroAstro#s satellite inspection products and orbital transfer services. In the future, AeroAstro plans to market an even less expensive version of the Bitsy technology. The plan, which is targeted to universities, markets a sort of "satellite in a kit," for less than $1 million. This technology would allow universities to build true space hardware for a fraction of the cost of launching a regular satellite.

Experimentally quantifying anion polarizability at the air/water interface.

PubMed

Tong, Yujin; Zhang, Igor Ying; Campen, R Kramer

2018-04-03

The adsorption of large, polarizable anions from aqueous solution on the air/water interface controls important atmospheric chemistry and is thought to resemble anion adsorption at hydrophobic interfaces generally. While the favourability of adsorption of such ions is clear, quantifying adsorption thermodynamics has proven challenging because it requires accurate description of the structure of the anion and its solvation shell at the interface. In principle anion polarizability offers a structural window, but to the best of our knowledge there has so far been no experimental technique that allowed its characterization with interfacial specificity. Here, we meet this challenge using interface-specific vibrational spectroscopy of Cl-O vibrations of the [Formula: see text] anion at the air/water interface and report that the interface breaks the symmetry of the anion, the anisotropy of [Formula: see text]'s polarizability tensor is more than two times larger than in bulk water and concentration dependent, and concentration-dependent polarizability changes are consistent with correlated changes in surface tension.

CDROM User Interface Evaluation: The Appropriateness of GUIs.

ERIC Educational Resources Information Center

Bosch, Victoria Manglano; Hancock-Beaulieu, Micheline

1995-01-01

Assesses the appropriateness of GUIs (graphical user interfaces), more specifically Windows-based interfaces for CD-ROM. An evaluation model is described that was developed to carry out an expert evaluation of the interfaces of seven CD-ROM products. Results are discussed in light of HCI (human-computer interaction) usability criteria and design…

Science Gateways, Scientific Workflows and Open Community Software

NASA Astrophysics Data System (ADS)

Pierce, M. E.; Marru, S.

2014-12-01

Science gateways and scientific workflows occupy different ends of the spectrum of user-focused cyberinfrastructure. Gateways, sometimes called science portals, provide a way for enabling large numbers of users to take advantage of advanced computing resources (supercomputers, advanced storage systems, science clouds) by providing Web and desktop interfaces and supporting services. Scientific workflows, at the other end of the spectrum, support advanced usage of cyberinfrastructure that enable "power users" to undertake computational experiments that are not easily done through the usual mechanisms (managing simulations across multiple sites, for example). Despite these different target communities, gateways and workflows share many similarities and can potentially be accommodated by the same software system. For example, pipelines to process InSAR imagery sets or to datamine GPS time series data are workflows. The results and the ability to make downstream products may be made available through a gateway, and power users may want to provide their own custom pipelines. In this abstract, we discuss our efforts to build an open source software system, Apache Airavata, that can accommodate both gateway and workflow use cases. Our approach is general, and we have applied the software to problems in a number of scientific domains. In this talk, we discuss our applications to usage scenarios specific to earth science, focusing on earthquake physics examples drawn from the QuakSim.org and GeoGateway.org efforts. We also examine the role of the Apache Software Foundation's open community model as a way to build up common commmunity codes that do not depend upon a single "owner" to sustain. Pushing beyond open source software, we also see the need to provide gateways and workflow systems as cloud services. These services centralize operations, provide well-defined programming interfaces, scale elastically, and have global-scale fault tolerance. We discuss our work providing Apache Airavata as a hosted service to provide these features.

Integrating interface slicing into software engineering processes

NASA Technical Reports Server (NTRS)

Beck, Jon

1993-01-01

Interface slicing is a tool which was developed to facilitate software engineering. As previously presented, it was described in terms of its techniques and mechanisms. The integration of interface slicing into specific software engineering activities is considered by discussing a number of potential applications of interface slicing. The applications discussed specifically address the problems, issues, or concerns raised in a previous project. Because a complete interface slicer is still under development, these applications must be phrased in future tenses. Nonetheless, the interface slicing techniques which were presented can be implemented using current compiler and static analysis technology. Whether implemented as a standalone tool or as a module in an integrated development or reverse engineering environment, they require analysis no more complex than that required for current system development environments. By contrast, conventional slicing is a methodology which, while showing much promise and intuitive appeal, has yet to be fully implemented in a production language environment despite 12 years of development.

Unfolding the Knowledge and Power Dynamics of the "Farmers-Rural Extensionists" Interface in North-Eastern Argentina

ERIC Educational Resources Information Center

Landini, Fernando

2016-01-01

Purpose: In this paper, the knowledge dynamics of the farmer-rural extensionist' interface were explored from extensionists' perspective with the aim of understanding the matchmaking processes between supply and demand of extension services at the micro-level. Design/methodology/approach: Forty semi-structured interviews were conducted with…

Pre-Service Teachers' Pedagogical Relationships and Experiences of Embedding Indigenous Australian Knowledge in Teaching Practicum

ERIC Educational Resources Information Center

Hart, Victor; Whatman, Susan; McLaughlin, Juliana; Sharma-Brymer, Vinathe

2012-01-01

This paper argues from the standpoint that embedding Indigenous knowledge and perspectives in Australian curricula occurs within a space of tension, "the cultural interface", in negotiation and contestation with other dominant knowledge systems. In this interface, Indigenous knowledge is in a state of constancy and flux, invisible and…

Testing of FTS fingers and interface using a passive compliant robot manipulator. [flight telerobot servicer

NASA Technical Reports Server (NTRS)

Nguyen, Charles C.; Antrazi, Sami S.

1992-01-01

This report deals with testing of a pair of robot fingers designed for the Flight Telerobotic Servicer (FTS) to grasp a cylinder type of Orbital Replaceable Unit (ORU) interface. The report first describes the objectives of the study and then the testbed consisting of a Stewart Platform-based manipulator equipped with a passive compliant platform which also serves as a force/torque sensor. Kinematic analysis is then performed to provide a closed-form solution for the force inverse kinematics and iterative solution for the force forward kinematics using the Newton's Raphson Method. Mathematical expressions are then derived to compute force/torques applied to the FTS fingers during the mating/demating with the interface. The report then presents the three parts of the experimental study on the feasibility and characteristics of the fingers. The first part obtains data of forces applied by the fingers to the interface under various misalignments, the second part determines the maximum allowable capture angles for mating, and the third part processes and interprets the obtained force/torque data.

The THOSE remote interface

NASA Astrophysics Data System (ADS)

Klawon, Kevin; Gold, Josh; Bachman, Kristen

2013-05-01

The DIA, in conjunction with the Army Research Lab (ARL), wants to create an Unmanned Ground Sensor (UGS) controller that is (a) interoperable across all controller platforms, (b) capable of easily adding new sensors, radios, and processes and (c) backward compatible with existing UGS systems. To achieve this, a Terra Harvest controller was created that used Java JRE 1.6 and an Open Services Gateway initiative (OSGi) platform, named Terra Harvest Open Software Environment (THOSE). OSGi is an extensible framework that provides a modularized environment for deploying functionality in "bundles". These bundles can publish, discover, and share services available from other external bundles or bundles provided by the controller core. With the addition of a web GUI used for interacting with THOSE, a natural step was then to create a common remote interface that allows 3rd party real-time interaction with the controller. This paper provides an overview of the THOSE system and its components as well as a description of the architectural structure of the remote interface, highlighting the interactions occurring between the controller and the remote interface and its role in providing a positive user experience for managing UGSS functions.

Establishing Transportation Framework Services Using the Open Geospatial Consortium Web Feature Service Specification

NASA Astrophysics Data System (ADS)

Yang, C.; Wong, D. W.; Phillips, T.; Wright, R. A.; Lindsey, S.; Kafatos, M.

2005-12-01

As a teamed partnership of the Center for Earth Observing and Space Research (CEOSR) at George Mason University (GMU), Virginia Department of Transportation (VDOT), Bureau of Transportation Statistics at the Department of Transportation (BTS/DOT), and Intergraph, we established Transportation Framework Data Services using Open Geospatial Consortium (OGC)'s Web Feature Service (WFS) Specification to enable the sharing of transportation data among the federal level with data from BTS/DOT, the state level through VDOT, the industries through Intergraph. CEOSR develops WFS solutions using Intergraph software. Relevant technical documents are also developed and disseminated through the partners. The WFS is integrated with operational geospatial systems at CEOSR and VDOT. CEOSR works with Intergraph on developing WFS solutions and technical documents. GeoMedia WebMap WFS toolkit is used with software and technical support from Intergraph. ESRI ArcIMS WFS connector is used with GMU's campus license of ESRI products. Tested solutions are integrated with framework data service operational systems, including 1) CEOSR's interoperable geospatial information services, FGDC clearinghouse Node, Geospatial One Stop (GOS) portal, and WMS services, 2) VDOT's state transportation data and GIS infrastructure, and 3)BTS/DOT's national transportation data. The project presents: 1) develop and deploy an operational OGC WFS 1.1 interfaces at CEOSR for registering with FGDC/GOS Portal and responding to Web ``POST'' requests for transportation Framework data as listed in Table 1; 2) build the WFS service that can return the data that conform to the drafted ANSI/INCITS L1 Standard (when available) for each identified theme in the format given by OGC Geography Markup Language (GML) Version 3.0 or higher; 3) integrate the OGC WFS with CEOSR's clearinghouse nodes, 4) establish a formal partnership to develop and share WFS-based geospatial interoperability technology among GMU, VDOT, BTS/DOT, and Intergraph; and 5) develop WFS-based solutions and technical documents using the GeoMedia WebMap WFS toolkit. Geospatial Web Feature Service is demonstrated to be more efficient in sharing vector data and supports direct Internet access transportation data. Developed WFS solutions also enhanced the interoperable service provided by CEOSR through the FGDC clearinghouse node and the GOS Portal.

Data Aggregation System: A system for information retrieval on demand over relational and non-relational distributed data sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ball, G.; Kuznetsov, V.; Evans, D.

We present the Data Aggregation System, a system for information retrieval and aggregation from heterogenous sources of relational and non-relational data for the Compact Muon Solenoid experiment on the CERN Large Hadron Collider. The experiment currently has a number of organically-developed data sources, including front-ends to a number of different relational databases and non-database data services which do not share common data structures or APIs (Application Programming Interfaces), and cannot at this stage be readily converged. DAS provides a single interface for querying all these services, a caching layer to speed up access to expensive underlying calls and the abilitymore » to merge records from different data services pertaining to a single primary key.« less

Development of a Multi-Agent m-Health Application Based on Various Protocols for Chronic Disease Self-Management.

PubMed

Park, Hyun Sang; Cho, Hune; Kim, Hwa Sun

2016-01-01

The purpose of this study was to develop and evaluate a mobile health application (Self-Management mobile Personal Health Record: "SmPHR") to ensure the interoperability of various personal health devices (PHDs) and electronic medical record systems (EMRs) for continuous self-management of chronic disease patients. The SmPHR was developed for Android 4.0.3, and implemented according to the optimized standard protocol for each interface of healthcare services adopted by the Continua Health Alliance (CHA). That is, the Personal Area Network (PAN) interface between the application and PHD implements ISO/IEEE 11073-20,601, 10,404, 10,407, 10,415, 10,417, and Bluetooth Health Device Profile (HDP), and EMRs with a wide area network (WAN) interface implement HL7 V2.6; the Health Record Network (HRN) interface implements Continuity of Care Document (CCD) and Continuity of Care Record (CCR). Also, for SmPHR, we evaluated the transmission error rate between the interface using four PHDs and personal health record systems (PHRs) from previous research, with 611 users and elderly people after receiving institutional review board (IRB) approval. In the evaluation, the PAN interface showed 15 (2.4 %) errors, and the WAN and HRN interface showed 13 (2.1 %) errors in a total of 611 transmission attempts. Also, we received opinions regarding SmPHR from 15 healthcare professionals who took part in the clinical trial. Thus, SmPHR can be provided as an interconnected PHR mobile health service to patients, allowing 'plug and play' of PHDs and EMRs through various standard protocols.

Simultaneous control of multiple instruments at the Advanced Technology Solar Telescope

NASA Astrophysics Data System (ADS)

Johansson, Erik M.; Goodrich, Bret

2012-09-01

The Advanced Technology Solar Telescope (ATST) is a 4-meter solar observatory under construction at Haleakala, Hawaii. The simultaneous use of multiple instruments is one of the unique capabilities that makes the ATST a premier ground based solar observatory. Control of the instrument suite is accomplished by the Instrument Control System (ICS), a layer of software between the Observatory Control System (OCS) and the instruments. The ICS presents a single narrow interface to the OCS and provides a standard interface for the instruments to be controlled. It is built upon the ATST Common Services Framework (CSF), an infrastructure for the implementation of a distributed control system. The ICS responds to OCS commands and events, coordinating and distributing them to the various instruments while monitoring their progress and reporting the status back to the OCS. The ICS requires no specific knowledge about the instruments. All information about the instruments used in an experiment is passed by the OCS to the ICS, which extracts and forwards the parameters to the appropriate instrument controllers. The instruments participating in an experiment define the active instrument set. A subset of those instruments must complete their observing activities in order for the experiment to be considered complete and are referred to as the must-complete instrument set. In addition, instruments may participate in eavesdrop mode, outside of the control of the ICS. All instrument controllers use the same standard narrow interface, which allows new instruments to be added without having to modify the interface or any existing instrument controllers.

The new Planetary Science Archive (PSA): Exploration and discovery of scientific datasets from ESA's planetary missions

NASA Astrophysics Data System (ADS)

Martinez, Santa; Besse, Sebastien; Heather, Dave; Barbarisi, Isa; Arviset, Christophe; De Marchi, Guido; Barthelemy, Maud; Docasal, Ruben; Fraga, Diego; Grotheer, Emmanuel; Lim, Tanya; Macfarlane, Alan; Rios, Carlos; Vallejo, Fran; Saiz, Jaime; ESDC (European Space Data Centre) Team

2016-10-01

The Planetary Science Archive (PSA) is the European Space Agency's (ESA) repository of science data from all planetary science and exploration missions. The PSA provides access to scientific datasets through various interfaces at http://archives.esac.esa.int/psa. All datasets are scientifically peer-reviewed by independent scientists, and are compliant with the Planetary Data System (PDS) standards. The PSA is currently implementing a number of significant improvements, mostly driven by the evolution of the PDS standard, and the growing need for better interfaces and advanced applications to support science exploitation. The newly designed PSA will enhance the user experience and will significantly reduce the complexity for users to find their data promoting one-click access to the scientific datasets with more specialised views when needed. This includes a better integration with Planetary GIS analysis tools and Planetary interoperability services (search and retrieve data, supporting e.g. PDAP, EPN-TAP). It will be also up-to-date with versions 3 and 4 of the PDS standards, as PDS4 will be used for ESA's ExoMars and upcoming BepiColombo missions. Users will have direct access to documentation, information and tools that are relevant to the scientific use of the dataset, including ancillary datasets, Software Interface Specification (SIS) documents, and any tools/help that the PSA team can provide. A login mechanism will provide additional functionalities to the users to aid / ease their searches (e.g. saving queries, managing default views). This contribution will introduce the new PSA, its key features and access interfaces.

Presentation planning using an integrated knowledge base

NASA Technical Reports Server (NTRS)

Arens, Yigal; Miller, Lawrence; Sondheimer, Norman

1988-01-01

A description is given of user interface research aimed at bringing together multiple input and output modes in a way that handles mixed mode input (commands, menus, forms, natural language), interacts with a diverse collection of underlying software utilities in a uniform way, and presents the results through a combination of output modes including natural language text, maps, charts and graphs. The system, Integrated Interfaces, derives much of its ability to interact uniformly with the user and the underlying services and to build its presentations, from the information present in a central knowledge base. This knowledge base integrates models of the application domain (Navy ships in the Pacific region, in the current demonstration version); the structure of visual displays and their graphical features; the underlying services (data bases and expert systems); and interface functions. The emphasis is on a presentation planner that uses the knowledge base to produce multi-modal output. There has been a flurry of recent work in user interface management systems. (Several recent examples are listed in the references). Existing work is characterized by an attempt to relieve the software designer of the burden of handcrafting an interface for each application. The work has generally focused on intelligently handling input. This paper deals with the other end of the pipeline - presentations.

EUDAT B2FIND : A Cross-Discipline Metadata Service and Discovery Portal

NASA Astrophysics Data System (ADS)

Widmann, Heinrich; Thiemann, Hannes

2016-04-01

The European Data Infrastructure (EUDAT) project aims at a pan-European environment that supports a variety of multiple research communities and individuals to manage the rising tide of scientific data by advanced data management technologies. This led to the establishment of the community-driven Collaborative Data Infrastructure that implements common data services and storage resources to tackle the basic requirements and the specific challenges of international and interdisciplinary research data management. The metadata service B2FIND plays a central role in this context by providing a simple and user-friendly discovery portal to find research data collections stored in EUDAT data centers or in other repositories. For this we store the diverse metadata collected from heterogeneous sources in a comprehensive joint metadata catalogue and make them searchable in an open data portal. The implemented metadata ingestion workflow consists of three steps. First the metadata records - provided either by various research communities or via other EUDAT services - are harvested. Afterwards the raw metadata records are converted and mapped to unified key-value dictionaries as specified by the B2FIND schema. The semantic mapping of the non-uniform, community specific metadata to homogenous structured datasets is hereby the most subtle and challenging task. To assure and improve the quality of the metadata this mapping process is accompanied by • iterative and intense exchange with the community representatives, • usage of controlled vocabularies and community specific ontologies and • formal and semantic validation. Finally the mapped and checked records are uploaded as datasets to the catalogue, which is based on the open source data portal software CKAN. CKAN provides a rich RESTful JSON API and uses SOLR for dataset indexing that enables users to query and search in the catalogue. The homogenization of the community specific data models and vocabularies enables not only the unique presentation of these datasets as tables of field-value pairs but also the faceted, spatial and temporal search in the B2FIND metadata portal. Furthermore the service provides transparent access to the scientific data objects through the given references and identifiers in the metadata. B2FIND offers support for new communities interested in publishing their data within EUDAT. We present here the functionality and the features of the B2FIND service and give an outlook of further developments as interfaces to external libraries and use of Linked Data.

Development of a User Interface for a Regression Analysis Software Tool

NASA Technical Reports Server (NTRS)

Ulbrich, Norbert Manfred; Volden, Thomas R.

2010-01-01

An easy-to -use user interface was implemented in a highly automated regression analysis tool. The user interface was developed from the start to run on computers that use the Windows, Macintosh, Linux, or UNIX operating system. Many user interface features were specifically designed such that a novice or inexperienced user can apply the regression analysis tool with confidence. Therefore, the user interface s design minimizes interactive input from the user. In addition, reasonable default combinations are assigned to those analysis settings that influence the outcome of the regression analysis. These default combinations will lead to a successful regression analysis result for most experimental data sets. The user interface comes in two versions. The text user interface version is used for the ongoing development of the regression analysis tool. The official release of the regression analysis tool, on the other hand, has a graphical user interface that is more efficient to use. This graphical user interface displays all input file names, output file names, and analysis settings for a specific software application mode on a single screen which makes it easier to generate reliable analysis results and to perform input parameter studies. An object-oriented approach was used for the development of the graphical user interface. This choice keeps future software maintenance costs to a reasonable limit. Examples of both the text user interface and graphical user interface are discussed in order to illustrate the user interface s overall design approach.

Web-scale discovery in an academic health sciences library: development and implementation of the EBSCO Discovery Service.

PubMed

Thompson, Jolinda L; Obrig, Kathe S; Abate, Laura E

2013-01-01

Funds made available at the close of the 2010-11 fiscal year allowed purchase of the EBSCO Discovery Service (EDS) for a year-long trial. The appeal of this web-scale discovery product that offers a Google-like interface to library resources was counter-balanced by concerns about quality of search results in an academic health science setting and the challenge of configuring an interface that serves the needs of a diverse group of library users. After initial configuration, usability testing with library users revealed the need for further work before general release. Of greatest concern were continuing issues with the relevance of items retrieved, appropriateness of system-supplied facet terms, and user difficulties with navigating the interface. EBSCO has worked with the library to better understand and identify problems and solutions. External roll-out to users occurred in June 2012.

The Core Services of the European Plate Observing System (EPOS)

NASA Astrophysics Data System (ADS)

Hoffmann, T. L.; Euteneuer, F. H.; Lauterjung, J.

2013-12-01

The ESFRI project European Plate Observing System (EPOS) was launched in November 2010 and has now completed its year 3 of the four-year preparatory phase. EPOS will create a single sustainable, permanent observation infrastructure, integrating existing geophysical monitoring networks, local observatories and experimental laboratories in Europe and adjacent regions. EPOS' technical Work Package 6 has developed a three layer architectural model for the construction of the EPOS Core Services (CS) during the subsequent implementation phase. The Poster will present and detail on these three layers, consisting of the EPOS Integrated Core Services (ICS), the Thematic Core Services (TCS) and the existing National Research Infrastructures & Data Centers. The basic layer of the architecture is established by the National Research Infrastructures (RIs) & Data Centers, which generate data and information and are responsible for the operation of the instrumentation. National RIs will provide their data to the Thematic Cores Services. The Thematic Core Services constitute the community layer of EPOS architecture and they will: 1) consist of existing (e.g. ORFEUS, EMSC), developing (e.g. EUREF/GNSS) or still to be developed Service Providers for specific thematic communities, as represented within EPOS through the technical EPOS Working Groups (e.g., seismology, volcanology, geodesy, geology, analytic labs for rock physics, geomagnetism, geo-resources ... and many others), 2) provide data services to specific communities, 3) link the National Research Infrastructures to the EPOS Integrated Services, 4) include Service Providers (e.g. OneGeology+, Intermagnet) that may be merely linked or partially integrated and 5) consist of Integrated Laboratories and RIs spanning multiple EPOS disciplines and taking advantage of other existing Thematic Services. The EPOS Integrated Services constitute the ICT layer of the EPOS portal and they will: 1) provide access to multidisciplinary data from different EPOS Thematic Core Services and from the National RIs & Data Centers, 2) provide access to data products, synthetic data from simulations, data processing and data visualization tools, 3) serve science, industry, education, government, legal and other stakeholders in an integrated fashion through the EPOS User Interface, and 4) provide a variety of ICT technological services including (but not being limited) to discovery functions, data mining, access to modeling tools and high performance computing, and training & tutorials.

76 FR 40707 - 36(b)(1) Arms Sales Notification

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-11

... training and training equipment, support equipment, U.S. Government and contractor engineering, logistics... training equipment, support equipment, U.S. Government and contractor engineering, logistics, and technical... access to SSEE Increment F services via standard Service Oriented Architecture (SOA) interfaces via...

Modular Integrated Stackable Layers (MISL) 1.1 Design Specification. Design Guideline Document

NASA Technical Reports Server (NTRS)

Yim, Hester J.

2012-01-01

This document establishes the design guideline of the Modular Instrumentation Data Acquisition (MI-DAQ) system in utilization of several designs available in EV. The MI- DAQ provides the options to the customers depending on their system requirements i.e. a 28V interface power supply, a low power battery operated system, a low power microcontroller, a higher performance microcontroller, a USB interface, a Ethernet interface, a wireless communication, various sensor interfaces, etc. Depending on customer's requirements, the each functional board can be stacked up from a bottom level of power supply to a higher level of stack to provide user interfaces. The stack up of boards are accomplished by a predefined and standardized power bus and data bus connections which are included in this document along with other physical and electrical guidelines. This guideline also provides information for a new design options. This specification is the product of a collaboration between NASA/JSC/EV and Texas A&M University. The goal of the collaboration is to open source the specification and allow outside entities to design, build, and market modules that are compatible with the specification. NASA has designed and is using numerous modules that are compatible to this specification. A limited number of these modules will also be released as open source designs to support the collaboration. The released designs are listed in the Applicable Documents.

ESASky: a new Astronomy Multi-Mission Interface

NASA Astrophysics Data System (ADS)

Baines, D.; Merin, B.; Salgado, J.; Giordano, F.; Sarmiento, M.; Lopez Marti, B.; Racero, E.; Gutierrez, R.; De Teodoro, P.; Nieto, S.

2016-06-01

ESA is working on a science-driven discovery portal for all its astronomy missions at ESAC called ESASky. The first public release of this service will be shown, featuring interfaces for sky exploration and for single and multiple targets. It requires no operational knowledge of any of the missions involved. A first public beta release took place in October 2015 and gives users world-wide simplified access to high-level science-ready data products from ESA Astronomy missions plus a number of ESA-produced source catalogues. XMM-Newton data, metadata and products were some of the first to be accessible through ESASky. In the next decade, ESASky aims to include not only ESA missions but also access to data from other space and ground-based astronomy missions and observatories. From a technical point of view, ESASky is a web application that offers all-sky projections of full mission datasets using a new-generation HEALPix projection called HiPS; detailed geometrical footprints to connect all-sky mosaics to individual observations; direct access to the underlying mission-specific science archives and catalogues. The poster will be accompanied by a demo booth at the conference.

Thermal barrier coating life prediction model development

NASA Technical Reports Server (NTRS)

Sheffler, K. D.; Demasi, J. T.

1985-01-01

A methodology was established to predict thermal barrier coating life in an environment simulative of that experienced by gas turbine airfoils. Specifically, work is being conducted to determine failure modes of thermal barrier coatings in the aircraft engine environment. Analytical studies coupled with appropriate physical and mechanical property determinations are being employed to derive coating life prediction model(s) on the important failure mode(s). An initial review of experimental and flight service components indicates that the predominant mode of TBC failure involves thermomechanical spallation of the ceramic coating layer. This ceramic spallation involves the formation of a dominant crack in the ceramic coating parallel to and closely adjacent to the metal-ceramic interface. Initial results from a laboratory test program designed to study the influence of various driving forces such as temperature, thermal cycle frequency, environment, and coating thickness, on ceramic coating spalling life suggest that bond coat oxidation damage at the metal-ceramic interface contributes significantly to thermomechanical cracking in the ceramic layer. Low cycle rate furnace testing in air and in argon clearly shows a dramatic increase of spalling life in the non-oxidizing environments.

A highly scalable information system as extendable framework solution for medical R&D projects.

PubMed

Holzmüller-Laue, Silke; Göde, Bernd; Stoll, Regina; Thurow, Kerstin

2009-01-01

For research projects in preventive medicine a flexible information management is needed that offers a free planning and documentation of project specific examinations. The system should allow a simple, preferably automated data acquisition from several distributed sources (e.g., mobile sensors, stationary diagnostic systems, questionnaires, manual inputs) as well as an effective data management, data use and analysis. An information system fulfilling these requirements has been developed at the Center for Life Science Automation (celisca). This system combines data of multiple investigations and multiple devices and displays them on a single screen. The integration of mobile sensor systems for comfortable, location-independent capture of time-based physiological parameter and the possibility of observation of these measurements directly by this system allow new scenarios. The web-based information system presented in this paper is configurable by user interfaces. It covers medical process descriptions, operative process data visualizations, a user-friendly process data processing, modern online interfaces (data bases, web services, XML) as well as a comfortable support of extended data analysis with third-party applications.

Closed-loop dialog model of face-to-face communication with a photo-real virtual human

NASA Astrophysics Data System (ADS)

Kiss, Bernadette; Benedek, Balázs; Szijárto, Gábor; Takács, Barnabás

2004-01-01

We describe an advanced Human Computer Interaction (HCI) model that employs photo-realistic virtual humans to provide digital media users with information, learning services and entertainment in a highly personalized and adaptive manner. The system can be used as a computer interface or as a tool to deliver content to end-users. We model the interaction process between the user and the system as part of a closed loop dialog taking place between the participants. This dialog, exploits the most important characteristics of a face-to-face communication process, including the use of non-verbal gestures and meta communication signals to control the flow of information. Our solution is based on a Virtual Human Interface (VHI) technology that was specifically designed to be able to create emotional engagement between the virtual agent and the user, thus increasing the efficiency of learning and/or absorbing any information broadcasted through this device. The paper reviews the basic building blocks and technologies needed to create such a system and discusses its advantages over other existing methods.

SCEAPI: A unified Restful Web API for High-Performance Computing

NASA Astrophysics Data System (ADS)

Rongqiang, Cao; Haili, Xiao; Shasha, Lu; Yining, Zhao; Xiaoning, Wang; Xuebin, Chi

2017-10-01

The development of scientific computing is increasingly moving to collaborative web and mobile applications. All these applications need high-quality programming interface for accessing heterogeneous computing resources consisting of clusters, grid computing or cloud computing. In this paper, we introduce our high-performance computing environment that integrates computing resources from 16 HPC centers across China. Then we present a bundle of web services called SCEAPI and describe how it can be used to access HPC resources with HTTP or HTTPs protocols. We discuss SCEAPI from several aspects including architecture, implementation and security, and address specific challenges in designing compatible interfaces and protecting sensitive data. We describe the functions of SCEAPI including authentication, file transfer and job management for creating, submitting and monitoring, and how to use SCEAPI in an easy-to-use way. Finally, we discuss how to exploit more HPC resources quickly for the ATLAS experiment by implementing the custom ARC compute element based on SCEAPI, and our work shows that SCEAPI is an easy-to-use and effective solution to extend opportunistic HPC resources.

Archiving and Near Real Time Visualization of USGS Instantaneous Data

NASA Astrophysics Data System (ADS)

Zaslavsky, I.; Ryan, D.; Whitenack, T.; Valentine, D. W.; Rodriguez, M.

2009-12-01

The CUAHSI Hydrologic Information System project has been developing databases, services and online and desktop software applications supporting standards-based publication and access to large volumes of hydrologic data from US federal agencies and academic partners. In particular, the CUAHSI WaterML 1.x schema specification for exchanging hydrologic time series, earlier published as an OGC Discussion Paper (2007), has been adopted by the United States Geological Survey to provide web service access to USGS daily values and instantaneous data. The latter service, making available raw measurements of discharge, gage height and several other parameters for over 10,000 USGS real time measurement points, was announced by USGS, as an experimental WaterML-compliant service, at the end of July 2009. We demonstrate an online application that leverages the new service for nearly continuous harvesting of USGS real time data, and simultaneous visualization and analysis of the data streams. To make this possible, we integrate service components of the CUAHSI software stack with Open Source Data Turbine (OSDT) system, an NSF-supported software environment for robust and scalable assimilation of multimedia data streams (e.g. from sensors), and interfacing with a variety of viewers, databases, archival systems and client applications. Our application continuously queries USGS Instantaneous water data service (which provides access to 15-min measurements updated at USGS every 4 hours), and maps the results for each station-variable combination to a separate "channel", which is used by OSDT to quickly access and manipulate the time series. About 15,000 channels are used, which makes it by far the largest deployment of OSDT. Using RealTime Data Viewer, users can now select one or more stations of interest (e.g. from upstream or downstream from each other), and observe and annotate simultaneous dynamics in the respective discharge and gage height values, using fast forward or backward modes, real-time mode, etc. Memory management, scheduling service-based retrieval from USGS web services, and organizing access to 7,330 selected stations, turned out to be the major challenges in this project. To allow station navigation, they are grouped by state and county in the user interface. Memory footprint has been monitored under different Java VM settings, to find the correct regime. These and other solutions are discussed in the paper, and accompanied with a series of examples of simultaneous visualization of discharge from multiple stations as a component of hydrologic analysis.

Review of the Composability Problem for System Evaluation

DTIC Science & Technology

2004-11-01

burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services ...directory services (e.g., the Lightweight Directory Access Protocol (LDAP)), authentication (e.g., Kerberos), databases, user interface (e.g...exemplifies this type of development, by its use of commercial components and systems for authentication, access management, directory services

Oyster Fisheries App

NASA Technical Reports Server (NTRS)

Perez Guerrero, Geraldo A.; Armstrong, Duane; Underwood, Lauren

2015-01-01

This project is creating a cloud-enabled, HTML 5 web application to help oyster fishermen and state agencies apply Earth science to improve the management of this important natural and economic resource. The Oyster Fisheries app gathers and analyzes environmental and water quality information, and alerts fishermen and resources managers about problems in oyster fishing waters. An intuitive interface based on Google Maps displays the geospatial information and provides familiar interactive controls to the users. Alerts can be tailored to notify users when conditions in specific leases or public fishing areas require attention. The app is hosted on the Amazon Web Services cloud. It is being developed and tested using some of the latest web development tools such as web components and Polymer.

RAPID and DDS

NASA Technical Reports Server (NTRS)

Utz, Hans Heinrich

2011-01-01

This talk gives an overview of the the Robot Applications Programmers Interface Delegate (RAPID) as well as the distributed systems middleware Data Distribution Service (DDS). DDS is an open software standard, RAPID is cleared for open-source release under NOSA. RAPID specifies data-structures and semantics for high-level telemetry published by NASA robotic software. These data-structures are supported by multiple robotic platforms at Johnson Space Center (JSC), Jet Propulsion Laboratory (JPL) and Ames Research Center (ARC), providing high-level interoperability between those platforms. DDS is used as the middleware for data transfer. The feature set of the middleware heavily influences the design decision made in the RAPID specification. So it is appropriate to discuss both in this introductory talk.

Applying the Earth System Grid Security System in a Heterogeneous Environment of Data Access Services

NASA Astrophysics Data System (ADS)

Kershaw, Philip; Lawrence, Bryan; Lowe, Dominic; Norton, Peter; Pascoe, Stephen

2010-05-01

CEDA (Centre for Environmental Data Archival) based at STFC Rutherford Appleton Laboratory is host to the BADC (British Atmospheric Data Centre) and NEODC (NERC Earth Observation Data Centre) with data holdings of over half a Petabyte. In the coming months this figure is set to increase by over one Petabyte through the BADC's role as one of three data centres to host the CMIP5 (Coupled Model Intercomparison Project Phase 5) core archive of climate model data. Quite apart from the problem of managing the storage of such large volumes there is the challenge of collating the data together from the modelling centres around the world and enabling access to these data for the user community. An infrastructure to support this is being developed under the US Earth System Grid (ESG) and related projects bringing together participating organisations together in a federation. The ESG architecture defines Gateways, the web interfaces that enable users to access data and data serving applications organised into Data Nodes. The BADC has been working in collaboration with US Earth System Grid team and other partners to develop a security system to restrict access to data. This provides single sign-on via both OpenID and PKI based means and uses role based authorisation facilitated by SAML and OpenID based interfaces for attribute retrieval. This presentation will provide an overview of the access control architecture and look at how this has been implemented for CEDA. CEDA has developed an expertise in data access and information services over several years through a number of projects to develop and enhance these capabilities. Participation in CMIP5 comes at a time when a number of other software development activities are coming to fruition. New services are in the process of being deployed alongside services making up the system for ESG. The security system must apply access control across this heterogeneous environment of different data services and technologies. One strand of the development efforts within CEDA has been the NDG (NERC Datagrid) Security system. This system has been extended to interoperate with ESG, greatly assisted by the standards based approach adopted for the ESG security architecture. Drawing from experience from previous projects the decision was taken to refactor the NDG Security software into a component based architecture to enable a separation of concerns between access control and the functionality of a given application being protected. Such an approach is only possible through a generic interface. At CEDA, this has been realised in the Python programming language using the WSGI (Web Server Gateway Interface) specification. A parallel Java filter based implementation is also under development with our US partners for use with the THREDDS Data Server. Using such technologies applications and middleware can be assembled into custom configurations to meet different requirements. In the case of access control, NDG Security middleware can be layered over the top of existing applications without the need to modify them. A RESTful approach to the application of authorisation policy has been key in this approach. We explore the practical implementation of such a scheme alongside the application of the ESG security architecture to CEDA's OGC web services implementation COWS.

Design and implementation of a telecare information platform.

PubMed

Li, Shing-Han; Wang, Ching-Yao; Lu, Wen-Hui; Lin, Yuan-Yuan; Yen, David C

2012-06-01

For the aging population and for people with dominant chronic diseases, countries all over the world are promoting an "Aging in Place" program with its primary focus on the implementation of telecare. In 2009, Taiwan held a "Health Care Value-Added Platinum Program" with the goal of promoting the development of "Telecare" services by integrating medical treatment, healthcare, information communication, medical equipment and materials and by linking related cross-discipline professions to enable people to familiarize themselves with preventive healthcare services offered in their household and community environments. In addition, this program can be utilized to effectively provide diversified healthcare service benefitting society as a whole. This study aims to promote a diversified telecare service network in Taiwan's household and community environments, establish telecare information platforms, build an internal network of various healthcare service modes, standardize externally interfacing telecare information networks, effectively utilize related healthcare service resources, and complete reasonable service resource links forming an up-to-date health information exchange network. To this end, the telecare information platform based on service oriented architecture (SOA) is designed to promote an open telecare information interface and sharing environment to assist in such tasks as developing healthcare information exchange services, integrating service resources among various different healthcare service modes, accessing externally complex community affairs information, supporting remote physiological information transmissions, and providing diversified remote innovative services. Information system architecture and system monitoring indices of various types of healthcare service modes are used for system integrations for future development and/or expansions.

Theoretical Foundation for Electric-Dipole-Allowed Chiral-Specific Fluorescence Optical Rotary Dispersion (F-ORD) from Interfacial Assemblies.

PubMed

Deng, Fengyuan; Ulcickas, James R W; Simpson, Garth J

2016-11-03

Fluorescence optical rotary dispersion (F-ORD) is proposed as a novel chiral-specific and interface-specific spectroscopic method. F-ORD measurements of uniaxial assemblies are predicted to be fully electric-dipole-allowed, with corresponding increases in sensitivity to chirality relative to chiral-specific measurements in isotropic assemblies that are commonly interpreted through coupling between electric and magnetic dynamic dipoles. Observations of strong chiral sensitivity in prior single-molecule fluorescence measurements of chiral interfacial molecules are in excellent qualitative agreement with the predictions of the F-ORD mechanism and challenging to otherwise explain. F-ORD may provide methods to suppress background fluorescence in studies of biological interfaces, as the detected signal requires both polar local order and interfacial chirality. In addition, the molecular-level descriptions of the mechanisms underpinning F-ORD may also potentially apply to aid in interpreting chiral-specific Raman and surface-enhanced Raman spectroscopy measurements of uniaxially oriented assemblies, opening up opportunities for chiral-specific and interface-specific vibrational spectroscopy.

Better Educational Website Interface Design: The Implications from Gender-Specific Preferences in Graduate Students

ERIC Educational Resources Information Center

Hsu, Yu-chang

2006-01-01

This study investigated graduate students gender-specific preferences for certain website interface design features, intending to generate useful information for instructors in choosing and for website designers in creating educational websites. The features investigated in this study included colour value, major navigation buttons placement, and…

A Framework for Analyzing and Testing the Performance of Software Services

NASA Astrophysics Data System (ADS)

Bertolino, Antonia; de Angelis, Guglielmo; di Marco, Antinisca; Inverardi, Paola; Sabetta, Antonino; Tivoli, Massimo

Networks "Beyond the 3rd Generation" (B3G) are characterized by mobile and resource-limited devices that communicate through different kinds of network interfaces. Software services deployed in such networks shall adapt themselves according to possible execution contexts and requirement changes. At the same time, software services have to be competitive in terms of the Quality of Service (QoS) provided, or perceived by the end user.

OTF CCSDS Mission Operations Prototype Parameter Service. Phase I: Exit Presentation

NASA Technical Reports Server (NTRS)

Reynolds, Walter F.; Lucord, Steven A.; Stevens, John E.

2009-01-01

This slide presentation reviews the prototype of phase 1 of the parameter service design of the CCSDS mission operations. The project goals are to: (1) Demonstrate the use of Mission Operations standards to implement the Parameter Service (2) Demonstrate interoperability between Houston MCC and a CCSDS Mission Operations compliant mission operations center (3) Utilize Mission Operations Common Architecture. THe parameter service design, interfaces, and structures are described.

A Framework for Integrating Oceanographic Data Repositories

NASA Astrophysics Data System (ADS)

Rozell, E.; Maffei, A. R.; Beaulieu, S. E.; Fox, P. A.

2010-12-01

Oceanographic research covers a broad range of science domains and requires a tremendous amount of cross-disciplinary collaboration. Advances in cyberinfrastructure are making it easier to share data across disciplines through the use of web services and community vocabularies. Best practices in the design of web services and vocabularies to support interoperability amongst science data repositories are only starting to emerge. Strategic design decisions in these areas are crucial to the creation of end-user data and application integration tools. We present S2S, a novel framework for deploying customizable user interfaces to support the search and analysis of data from multiple repositories. Our research methods follow the Semantic Web methodology and technology development process developed by Fox et al. This methodology stresses the importance of close scientist-technologist interactions when developing scientific use cases, keeping the project well scoped and ensuring the result meets a real scientific need. The S2S framework motivates the development of standardized web services with well-described parameters, as well as the integration of existing web services and applications in the search and analysis of data. S2S also encourages the use and development of community vocabularies and ontologies to support federated search and reduce the amount of domain expertise required in the data discovery process. S2S utilizes the Web Ontology Language (OWL) to describe the components of the framework, including web service parameters, and OpenSearch as a standard description for web services, particularly search services for oceanographic data repositories. We have created search services for an oceanographic metadata database, a large set of quality-controlled ocean profile measurements, and a biogeographic search service. S2S provides an application programming interface (API) that can be used to generate custom user interfaces, supporting data and application integration across these repositories and other web resources. Although initially targeted towards a general oceanographic audience, the S2S framework shows promise in many science domains, inspired in part by the broad disciplinary coverage of oceanography. This presentation will cover the challenges addressed by the S2S framework, the research methods used in its development, and the resulting architecture for the system. It will demonstrate how S2S is remarkably extensible, and can be generalized to many science domains. Given these characteristics, the framework can simplify the process of data discovery and analysis for the end user, and can help to shift the responsibility of search interface development away from data managers.

Increasing the Automation and Autonomy for Spacecraft Operations with Criteria Action Table

NASA Technical Reports Server (NTRS)

Li, Zhen-Ping; Savki, Cetin

2005-01-01

The Criteria Action Table (CAT) is an automation tool developed for monitoring real time system messages for specific events and processes in order to take user defined actions based on a set of user-defined rules. CAT was developed by Lockheed Martin Space Operations as a part of a larger NASA effort at the Goddard Space Flight Center (GSFC) to create a component-based, middleware-based, and standard-based general purpose ground system architecture referred as GMSEC - the GSFC Mission Services Evolution Center. CAT has been integrated into the upgraded ground systems for Tropical Rainfall Measuring Mission (TRMM) and Small Explorer (SMEX) satellites and it plays the central role in their automation effort to reduce the cost and increase the reliability for spacecraft operations. The GMSEC architecture provides a standard communication interface and protocol for components to publish/describe messages to an information bus. It also provides a standard message definition so components can send and receive messages to the bus interface rather than each other, thus reducing the component-to-component coupling, interface, protocols, and link (socket) management. With the GMSEC architecture, components can publish standard event messages to the bus for all nominal, significant, and surprising events in regard to satellite, celestial, ground system, or any other activity. In addition to sending standard event messages, each GMSEC compliant component is required to accept and process GMSEC directive request messages.

Transparent mediation-based access to multiple yeast data sources using an ontology driven interface.

PubMed

Briache, Abdelaali; Marrakchi, Kamar; Kerzazi, Amine; Navas-Delgado, Ismael; Rossi Hassani, Badr D; Lairini, Khalid; Aldana-Montes, José F

2012-01-25

Saccharomyces cerevisiae is recognized as a model system representing a simple eukaryote whose genome can be easily manipulated. Information solicited by scientists on its biological entities (Proteins, Genes, RNAs...) is scattered within several data sources like SGD, Yeastract, CYGD-MIPS, BioGrid, PhosphoGrid, etc. Because of the heterogeneity of these sources, querying them separately and then manually combining the returned results is a complex and time-consuming task for biologists most of whom are not bioinformatics expert. It also reduces and limits the use that can be made on the available data. To provide transparent and simultaneous access to yeast sources, we have developed YeastMed: an XML and mediator-based system. In this paper, we present our approach in developing this system which takes advantage of SB-KOM to perform the query transformation needed and a set of Data Services to reach the integrated data sources. The system is composed of a set of modules that depend heavily on XML and Semantic Web technologies. User queries are expressed in terms of a domain ontology through a simple form-based web interface. YeastMed is the first mediation-based system specific for integrating yeast data sources. It was conceived mainly to help biologists to find simultaneously relevant data from multiple data sources. It has a biologist-friendly interface easy to use. The system is available at http://www.khaos.uma.es/yeastmed/.

InterEvDock: a docking server to predict the structure of protein–protein interactions using evolutionary information

PubMed Central

Yu, Jinchao; Vavrusa, Marek; Andreani, Jessica; Rey, Julien; Tufféry, Pierre; Guerois, Raphaël

2016-01-01

The structural modeling of protein–protein interactions is key in understanding how cell machineries cross-talk with each other. Molecular docking simulations provide efficient means to explore how two unbound protein structures interact. InterEvDock is a server for protein docking based on a free rigid-body docking strategy. A systematic rigid-body docking search is performed using the FRODOCK program and the resulting models are re-scored with InterEvScore and SOAP-PP statistical potentials. The InterEvScore potential was specifically designed to integrate co-evolutionary information in the docking process. InterEvDock server is thus particularly well suited in case homologous sequences are available for both binding partners. The server returns 10 structures of the most likely consensus models together with 10 predicted residues most likely involved in the interface. In 91% of all complexes tested in the benchmark, at least one residue out of the 10 predicted is involved in the interface, providing useful guidelines for mutagenesis. InterEvDock is able to identify a correct model among the top10 models for 49% of the rigid-body cases with evolutionary information, making it a unique and efficient tool to explore structural interactomes under an evolutionary perspective. The InterEvDock web interface is available at http://bioserv.rpbs.univ-paris-diderot.fr/services/InterEvDock/. PMID:27131368

Collaborative Cyberinfrastructure: Crowdsourcing of Knowledge and Discoveries (Invited)

NASA Astrophysics Data System (ADS)

Gay, P.

2013-12-01

The design and implementation of programs to crowdsource science presents a unique set of challenges to system architects, programmers, and designers. In this presentation, one solution, CosmoQuest's Citizen Science Builder (CSB), will be discussed. CSB combines a clean user interface with a powerful back end to allow the quick design and deployment of citizen science sites that meet the needs of both the random Joe Public, and the detail driven Albert Professional. In this talk, the software will be overviewed, and the results of usability testing and accuracy testing with both citizen and professional scientists will be discussed. The software is designed to run on one or more LINUX systems running Apache webserver with MySQL and PHP. The interface is HTML5 and relies on javascript and AJAX to provide a dynamic interactive experience. CosmoQuest currently runs on Amazon Web Services and uses VBulletin for logins. The public-facing aspects of CSB provide a uniform experience that allows citizen scientists to use a simple set of tools to achieve a diversity of tasks. This interface presents users with a large view window for data, a toolbar reminiscent of MS Word or Adobe Photoshop with tools from drawing circles or segmented lines, flagging features from a dropdown menu, or marking specific objects with a set marker. The toolbar also allows users to select checkboxes describing the image as a whole. In addition to the viewer and toolbar, volunteers can also access tooltips, examples, and a video tutorial. The scientist interface for CSB gives the science team the ability to prioritize images, download results, create comparison data to validate volunteer data, and also provides access to downloadable tools for doing data analysis. Both these interfaces are controlled through a simple set of config files, although some tasks require customization of the controlling javascript. These are used to point the software at YouTube tutorials, graphics, and the correct toolsets. The only part of the interface requiring direct CSB administrator attention is the uploading of new images/movies onto the server and uploading of meta-data about the data into the database. This step must be customized for each unique data set. Initial research shows that professionals using the software to annotate images - marking craters on the moon to be specific - are as accurate with CSB as they are with their favourite professional software. It also shows that the results of members of the public are within error of the results of the professionals, with roughly the same level of error in each group and across many crater scales. Results of interviews with volunteers about their ease moving between interfaces for different projects, and response to the aesthetics of the site will also be discussed during this presentation

Toward More Critical Reviewing and Analysis of CD-ROM User Software Interfaces.

ERIC Educational Resources Information Center

Zink, Steven D.

1991-01-01

Criticizes reviews of library CD-ROM products as being uncritical of the user interface and advocates a more rigorous evaluation, not only to aid potential buyers, but as a way to influence manufacturers. Congressional Information Services' Masterfile 2 is evaluated in the context of Heckel's "Principles of Friendly Software Design." (24…

FASTQ quality control dashboard

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-07-25

FQCDB builds up existing open source software, FastQC, implementing a modern web interface for across parsed output of FastQC. In addition, FQCDB is extensible as a web service to include additional plots of type line, boxplot, or heatmap, across data formatted according to guidelines. The interface is also configurable via more readable JSON format, enabling customization by non-web programmers.

Role of segregation and precipitates on interfacial strengthening mechanisms in metal matrix composites when subjected to thermo-mechanical processing

NASA Astrophysics Data System (ADS)

Myriounis, Dimitrios

Metal Matrix ceramic-reinforced composites are rapidly becoming strong candidates as structural materials for many high temperatures and aerospace applications. Metal matrix composites combine the ductile properties of the matrix with a brittle phase of the reinforcement, leading to high stiffness and strength with a reduction in structural weight. The main objective of using a metal matrix composite system is to increase service temperature or improve specific mechanical properties of structural components by replacing existing superalloys.The satisfactory performance of metal matrix composites depends critically on their integrity, the heart of which is the quality of the matrix-reinforcement interface. The nature of the interface depends on the processing of the metal matrix composite component. At the micro-level the development of local stress concentration gradients around the ceramic reinforcement, as the metal matrix attempts to deform during processing, can be very different to the nominal conditions and play a crucial role in important microstructural events such as segregation and precipitation at the matrix-reinforcement interface. These events dominate the cohesive strength and subsequent mechanical properties of the interface.At present the relationship between the strength properties of metal matrix composites and the details of the thermo-mechanical forming processes is not well understood.The purpose of the study is to investigate several strengthening mechanisms and the effect of thermo-mechanical processing of SiCp reinforced A359 aluminium alloy composites on the particle-matrix interface and the overall mechanical properties of the material. From experiments performed on composite materials subjected to various thermo-mechanical conditions and by observation using SEM microanalysis and mechanical testing, data were obtained, summarised and mathematically/statistically analysed upon their significance.The Al/SiCp composites studied, processed in specific thermo-mechanical conditions in order to attain higher values of interfacial fracture strength, due to precipitation hardening and segregation mechanisms, also exhibited enhanced bulk mechanical and fracture resistant properties.An analytical model to predict the interfacial fracture strength in the presence of material segregation was also developed during this research effort. Its validity was determined based on the data gathered from the experiments.The tailoring of the properties due to the microstructural modification of the composites was examined in relation to the experimental measurements obtained, which define the macroscopical behaviour of the material.

How can payback from health services research be assessed?

PubMed

Buxton, M; Hanney, S

1996-01-01

Throughout the world there is a growing recognition that health care should be research-led. This strengthens the requirement for expenditure on health services research to be justified by demonstrating the benefits it produces. However, payback from health research and development is a complex concept and little used term. Five main categories of payback can be identified: knowledge; research benefits; political and administrative benefits; health sector benefits; and broader economic benefits. Various models of research utilization together with previous assessments of payback from research helped in the development of a new conceptual model of how and where payback may occur. The model combines an input-output perspective with an examination of the permeable interfaces between research and its environment. The model characterizes research projects in terms of Inputs, Processes, and Primary Outputs. The last consist of knowledge and research benefits. There are two interfaces between the project and its environment. The first (Project Specification, Selection and Commissioning) is the link with Research Needs Assessment. The second (Dissemination) should lead to Secondary Outputs (which are policy or administrative decisions), and usually Applications (which take the form of behavioural changes), from which Impacts or Final Outcomes result. It is at this final stage that health and wider economic benefits can be measured. A series of case studies were used to assess the feasibility both of applying the model and the payback categorization. The paper draws various conclusions from the case studies and identifies a range of issues for further work.

The Perfectly Organized Search Service.

ERIC Educational Resources Information Center

Leach, Sandra Sinsel; Spencer, Mary Ellen

1993-01-01

Describes the evolution and operation of the successful Database Search Service (DSS) at the John C. Hodges Library, University of Tennessee, with detailed information about equipment, policies, software, training, and physical layout. Success is attributed to careful administration, standardization of search equipment and interfaces, staff…

First Prototype of a Web Map Interface for ESA's Planetary Science Archive (PSA)

NASA Astrophysics Data System (ADS)

Manaud, N.; Gonzalez, J.

2014-04-01

We present a first prototype of a Web Map Interface that will serve as a proof of concept and design for ESA's future fully web-based Planetary Science Archive (PSA) User Interface. The PSA is ESA's planetary science archiving authority and central repository for all scientific and engineering data returned by ESA's Solar System missions [1]. All data are compliant with NASA's Planetary Data System (PDS) Standards and are accessible through several interfaces [2]: in addition to serving all public data via FTP and the Planetary Data Access Protocol (PDAP), a Java-based User Interface provides advanced search, preview, download, notification and delivery-basket functionality. It allows the user to query and visualise instrument observations footprints using a map-based interface (currently only available for Mars Express HRSC and OMEGA instruments). During the last decade, the planetary mapping science community has increasingly been adopting Geographic Information System (GIS) tools and standards, originally developed for and used in Earth science. There is an ongoing effort to produce and share cartographic products through Open Geospatial Consortium (OGC) Web Services, or as standalone data sets, so that they can be readily used in existing GIS applications [3,4,5]. Previous studies conducted at ESAC [6,7] have helped identify the needs of Planetary GIS users, and define key areas of improvement for the future Web PSA User Interface. Its web map interface shall will provide access to the full geospatial content of the PSA, including (1) observation geometry footprints of all remote sensing instruments, and (2) all georeferenced cartographic products, such as HRSC map-projected data or OMEGA global maps from Mars Express. It shall aim to provide a rich user experience for search and visualisation of this content using modern and interactive web mapping technology. A comprehensive set of built-in context maps from external sources, such as MOLA topography, TES infrared maps or planetary surface nomenclature, provided in both simple cylindrical and polar stereographic projections, shall enhance this user experience. In addition, users should be able to import and export data in commonly used open- GIS formats. It is also intended to serve all PSA geospatial data through OGC-compliant Web Services so that they can be captured, visualised and analysed directly from GIS software, along with data from other sources. The following figure illustrates how the PSA web map interface and services shall fit in a typical Planetary GIS user working environment.

Applying Sensor Web Technology to Marine Sensor Data

NASA Astrophysics Data System (ADS)

Jirka, Simon; del Rio, Joaquin; Mihai Toma, Daniel; Nüst, Daniel; Stasch, Christoph; Delory, Eric

2015-04-01

In this contribution we present two activities illustrating how Sensor Web technology helps to enable a flexible and interoperable sharing of marine observation data based on standards. An important foundation is the Sensor Web Architecture developed by the European FP7 project NeXOS (Next generation Low-Cost Multifunctional Web Enabled Ocean Sensor Systems Empowering Marine, Maritime and Fisheries Management). This architecture relies on the Open Geospatial Consortium's (OGC) Sensor Web Enablement (SWE) framework. It is an exemplary solution for facilitating the interoperable exchange of marine observation data within and between (research) organisations. The architecture addresses a series of functional and non-functional requirements which are fulfilled through different types of OGC SWE components. The diverse functionalities offered by the NeXOS Sensor Web architecture are shown in the following overview: - Pull-based observation data download: This is achieved through the OGC Sensor Observation Service (SOS) 2.0 interface standard. - Push-based delivery of observation data to allow users the subscription to new measurements that are relevant for them: For this purpose there are currently several specification activities under evaluation (e.g. OGC Sensor Event Service, OGC Publish/Subscribe Standards Working Group). - (Web-based) visualisation of marine observation data: Implemented through SOS client applications. - Configuration and controlling of sensor devices: This is ensured through the OGC Sensor Planning Service 2.0 interface. - Bridging between sensors/data loggers and Sensor Web components: For this purpose several components such as the "Smart Electronic Interface for Sensor Interoperability" (SEISI) concept are developed; this is complemented by a more lightweight SOS extension (e.g. based on the W3C Efficient XML Interchange (EXI) format). To further advance this architecture, there is on-going work to develop dedicated profiles of selected OGC SWE specifications that provide stricter guidance how these standards shall be applied to marine data (e.g. SensorML 2.0 profiles stating which metadata elements are mandatory building upon the ESONET Sensor Registry developments, etc.). Within the NeXOS project the presented architecture is implemented as a set of open source components. These implementations can be re-used by all interested scientists and data providers needing tools for publishing or consuming oceanographic sensor data. In further projects such as the European project FixO3 (Fixed-point Open Ocean Observatories), these software development activities are complemented with additional efforts to provide guidance how Sensor Web technology can be applied in an efficient manner. This way, not only software components are made available but also documentation and information resources that help to understand which types of Sensor Web deployments are best suited to fulfil different types of user requirements.

Specific interface area in a thin layer system of two immiscible liquids with vapour generation at the contact interface

NASA Astrophysics Data System (ADS)

Pimenova, Anastasiya V.; Gazdaliev, Ilias M.; Goldobin, Denis S.

2017-06-01

For well-stirred multiphase fluid systems the mean interface area per unit volume, or “specific interface area” SV, is a significant characteristic of the system state. In particular, it is important for the dynamics of systems of immiscible liquids experiencing interfacial boiling. We estimate the value of parameter SV as a function of the heat influx {\\dot{Q}}V to the system or the average system overheat <Θ> above the interfacial boiling point. The derived results can be reformulated for the case of an endothermic chemical reaction between two liquid reagents with the gaseous form of one of the reaction products. The final results are restricted to the case of thin layers, where the potential gravitational energy of bubbles leaving the contact interface is small compared to their surface tension energy.

GiPSi:a framework for open source/open architecture software development for organ-level surgical simulation.

PubMed

Cavuşoğlu, M Cenk; Göktekin, Tolga G; Tendick, Frank

2006-04-01

This paper presents the architectural details of an evolving open source/open architecture software framework for developing organ-level surgical simulations. Our goal is to facilitate shared development of reusable models, to accommodate heterogeneous models of computation, and to provide a framework for interfacing multiple heterogeneous models. The framework provides an application programming interface for interfacing dynamic models defined over spatial domains. It is specifically designed to be independent of the specifics of the modeling methods used, and therefore facilitates seamless integration of heterogeneous models and processes. Furthermore, each model has separate geometries for visualization, simulation, and interfacing, allowing the model developer to choose the most natural geometric representation for each case. Input/output interfaces for visualization and haptics for real-time interactive applications have also been provided.

Internet SCADA Utilizing API's as Data Source

NASA Astrophysics Data System (ADS)

Robles, Rosslin John; Kim, Haeng-Kon; Kim, Tai-Hoon

An Application programming interface or API is an interface implemented by a software program that enables it to interact with other software. Many companies provide free API services which can be utilized in Control Systems. SCADA is an example of a control system and it is a system that collects data from various sensors at a factory, plant or in other remote locations and then sends this data to a central computer which then manages and controls the data. In this paper, we designed a scheme for Weather Condition in Internet SCADA Environment utilizing data from external API services. The scheme was designed to double check the weather information in SCADA.

Teleoperator system man-machine interface requirements for satellite retrieval and satellite servicing. Volume 1: Requirements

NASA Technical Reports Server (NTRS)

Malone, T. B.

1972-01-01

Requirements were determined analytically for the man machine interface for a teleoperator system performing on-orbit satellite retrieval and servicing. Requirements are basically of two types; mission/system requirements, and design requirements or design criteria. Two types of teleoperator systems were considered: a free flying vehicle, and a shuttle attached manipulator. No attempt was made to evaluate the relative effectiveness or efficiency of the two system concepts. The methodology used entailed an application of the Essex Man-Systems analysis technique as well as a complete familiarization with relevant work being performed at government agencies and by private industry.

Towards automation of user interface design

NASA Technical Reports Server (NTRS)

Gastner, Rainer; Kraetzschmar, Gerhard K.; Lutz, Ernst

1992-01-01

This paper suggests an approach to automatic software design in the domain of graphical user interfaces. There are still some drawbacks in existing user interface management systems (UIMS's) which basically offer only quantitative layout specifications via direct manipulation. Our approach suggests a convenient way to get a default graphical user interface which may be customized and redesigned easily in further prototyping cycles.

Crew interface specifications development functions, phase 3A

NASA Technical Reports Server (NTRS)

Carl, J. G.

1973-01-01

The findings and data products developed during the crew interface specification study for inflight maintenance and stowage functions are presented. Guidelines are provided for improving the present progress of defining, controlling, and managing the flight crew requirements. The following data products were developed: (1) description of inflight maintenance management process, (2) specifications for inflight maintenance management requirements, and (3) suggested inflight maintenance data processing reports for logistics management.

The Chandra Source Catalog: Storage and Interfaces

NASA Astrophysics Data System (ADS)

van Stone, David; Harbo, Peter N.; Tibbetts, Michael S.; Zografou, Panagoula; Evans, Ian N.; Primini, Francis A.; Glotfelty, Kenny J.; Anderson, Craig S.; Bonaventura, Nina R.; Chen, Judy C.; Davis, John E.; Doe, Stephen M.; Evans, Janet D.; Fabbiano, Giuseppina; Galle, Elizabeth C.; Gibbs, Danny G., II; Grier, John D.; Hain, Roger; Hall, Diane M.; He, Xiang Qun (Helen); Houck, John C.; Karovska, Margarita; Kashyap, Vinay L.; Lauer, Jennifer; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph B.; Mitschang, Arik W.; Morgan, Douglas L.; Mossman, Amy E.; Nichols, Joy S.; Nowak, Michael A.; Plummer, David A.; Refsdal, Brian L.; Rots, Arnold H.; Siemiginowska, Aneta L.; Sundheim, Beth A.; Winkelman, Sherry L.

2009-09-01

The Chandra Source Catalog (CSC) is part of the Chandra Data Archive (CDA) at the Chandra X-ray Center. The catalog contains source properties and associated data objects such as images, spectra, and lightcurves. The source properties are stored in relational databases and the data objects are stored in files with their metadata stored in databases. The CDA supports different versions of the catalog: multiple fixed release versions and a live database version. There are several interfaces to the catalog: CSCview, a graphical interface for building and submitting queries and for retrieving data objects; a command-line interface for property and source searches using ADQL; and VO-compliant services discoverable though the VO registry. This poster describes the structure of the catalog and provides an overview of the interfaces.

The MacGyver effect: alive and well in health services research?

PubMed Central

2011-01-01

Background In a manner similar to the television action hero MacGyver, health services researchers need to respond to the pressure of unpredictable demands and constrained time frames. The results are often both innovative and functional, with the creation of outputs that could not have been anticipated in the initial planning and design of the research. Discussion In the conduct of health services research many challenges to robust research processes are generated as a result of the interface between academic research, health policy and implementation agendas. Within a complex and rapidly evolving environment the task of the health services researcher is, therefore, to juggle sometimes contradictory pressures to produce valid results. Summary This paper identifies the MacGyver-type dilemmas which arise in health services research, wherein innovation may be called for, to maintain the intended scientific method and rigour. These 'MacGyver drivers' are framed as opposing issues from the perspective of both academic and public policy communities. The ideas expressed in this paper are illustrated by four examples from research projects positioned at the interface between public policy strategy and academia. PMID:21929826

Merging Real-Time and Retrospective Data Services, NOAA's Solar X-Ray Imager

NASA Astrophysics Data System (ADS)

Wilkinson, D. C.

2004-12-01

The ground systems team for NOAA's first Solar X-ray Imager (SXI) proposed a merger of real-time and retrospective data services with two goals in mind. First, it was anticipated that this would be a more economical approach than legacy systems that divided these services between two separate organizations within NOAA. Also, unifying these services would naturally provide a simpler, and more consistent public interface for all SXI data users. The implementation of this innovative approach has been successful on both accounts. NOAA's Space Environment Center (SEC) receives the telemetry stream from SXI and generates the raw and processed imagery that they use in their Space Weather alert and forecast services. These data are instantaneously transferred to NOAA's National Geophysical Data Center through a combination of data push and pull protocols. The result is an interface that provides access to all SXI data, including images that are less than two minutes old. The success of this system has prompted its use in the ground systems design for the SXI and Space Environment Monitor (SEM) data collected from GOES-N, schedule for launch in December 2004.

The climate4impact portal: bridging the CMIP5 and CORDEX data infrastructure to impact users

NASA Astrophysics Data System (ADS)

Plieger, Maarten; Som de Cerff, Wim; Pagé, Christian; Tatarinova, Natalia; Cofiño, Antonio; Vega Saldarriaga, Manuel; Hutjes, Ronald; de Jong, Fokke; Bärring, Lars; Sjökvist, Elin

2015-04-01

The aim of climate4impact is to enhance the use of Climate Research Data and to enhance the interaction with climate effect/impact communities. The portal is based on 21 impact use cases from 5 different European countries, and is evaluated by a user panel consisting of use case owners. It has been developed within the European projects IS-ENES and IS-ENES2 for more than 5 years, and its development currently continues within IS-ENES2 and CLIPC. As the climate impact community is very broad, the focus is mainly on the scientific impact community. This work has resulted in the ENES portal interface for climate impact communities and can be visited at www.climate4impact.eu. The climate4impact is connected to the Earth System Grid Federation (ESGF) nodes containing global climate model data (GCM data) from the fifth phase of the Coupled Model Intercomparison Project (CMIP5) and regional climate model data (RCM) data from the Coordinated Regional Climate Downscaling Experiment (CORDEX). This global network of climate model data centers offers services for data description, discovery and download. The climate4impact portal connects to these services using OpenID, and offers a user interface for searching, visualizing and downloading global climate model data and more. A challenging task was to describe the available model data and how it can be used. The portal tries to inform users about possible caveats when using climate model data. All impact use cases are described in the documentation section, using highlighted keywords pointing to detailed information in the glossary. During the project, the content management system Drupal was used to enable partners to contribute on the documentation section. In this presentation the architecture and following items will be detailed: - Visualization: Visualize data from ESGF data nodes using ADAGUC Web Map Services. - Processing: Transform data, subset, export into other formats, and perform climate indices calculations using Web Processing Services implemented by PyWPS, based on NCAR NCPP OpenClimateGIS and IS-ENES2 icclim. - Security: Login using OpenID for access to the ESGF data nodes. The ESGF works in conjunction with several external websites and systems. The climate4impact portal uses X509 based short lived credentials, generated on behalf of the user with a MyProxy service. Single Sign-on (SSO) is used to make these websites and systems work together. - Discovery: Facetted search based on e.g. variable name, model and institute using the ESGF search services. A catalog browser allows for browsing through CMIP5 and any other climate model data catalogues (e.g. ESSENCE, EOBS, UNIDATA). - Download: Directly from ESGF nodes and other THREDDS catalogs This architecture will also be used for the future Copernicus platform, developed in the EU FP7 CLIPC project. - Connection with the downscaling portal of the university of Cantabria - Experiences on the question and answer site via Askbot The current main objectives for climate4impact can be summarized in two objectives. The first one is to work on a web interface which automatically generates a graphical user interface on WPS endpoints. The WPS calculates climate indices and subset data using OpenClimateGIS/icclim on data stored in ESGF data nodes. Data is then transmitted from ESGF nodes over secured OpenDAP and becomes available in a new, per user, secured OpenDAP server. The results can then be visualized again using ADAGUC WMS. Dedicated wizards for processing of climate indices will be developed in close collaboration with users. The second one is to expose climate4impact services, so as to offer standardized services which can be used by other portals. This has the advantage to add interoperability between several portals, as well as to enable the design of specific portals aimed at different impact communities, either thematic or national, for example.

Spacecraft Onboard Interface Services: Current Status and Roadmap

NASA Astrophysics Data System (ADS)

Prochazka, Marek; Lopez Trescastro, Jorge; Krueger, Sabine

2016-08-01

Spacecraft Onboard Interface Services (SOIS) is a set of CCSDS standards defining communication stack services to interact with hardware equipment onboard spacecraft. In 2014 ESA kicked off three parallel activities to critically review the SOIS standards, use legacy spacecraft flight software (FSW), make it compliant to a preselected subset of SOIS standards and make performance and architecture assessment. As a part of the three parallel activities, led by Airbus DS Toulouse, OHB Bremen and Thales Alenia Space Cannes respectively, it was to provide feedback back to ESA and CCSDS and also to propose a roadmap of transition towards an operational FSW system fully compliant to applicable SOIS standards. The objective of the paper is twofold: Firstly it is to summarise main results of the three parallel activities and secondly, based on the results, to propose a roadmap for the future.

Definition of spacecraft standard interfaces by the NASA Space Assembly and Servicing Working Group (SASWG)

NASA Technical Reports Server (NTRS)

Radtke, Robert; Woolley, Charles; Arnold, Lana

1993-01-01

The purpose of the NASA Space Assembly and Servicing Working Group (SASWG) is to study enabling technologies for on-orbit spacecraft maintenance and servicing. One key technology required for effective space logistics activity is the development of standard spacecraft interfaces, including the 'Basic Set' defined by NASA, the U.S. Space Command, and industry panelists to be the following: (1) navigation aids; (2) grasping, berthing, and docking; and (3) utility connections for power, data, and fluids. Draft standards have been prepared and referred to professional standards organizations, including the AIAA, EIA, and SAE space standards committee. The objective of the SASWG is to support these committees with the technical expertise required to prepare standards, guidelines, and recommended practices which will be accepted by the ANSI and international standards organizations, including the ISO, IEC, and PASC.

NEON's eddy-covariance: interoperable flux data products, software and services for you, now

NASA Astrophysics Data System (ADS)

Metzger, S.; Desai, A. R.; Durden, D.; Hartmann, J.; Li, J.; Luo, H.; Durden, N. P.; Sachs, T.; Serafimovich, A.; Sturtevant, C.; Xu, K.

2017-12-01

Networks of eddy-covariance (EC) towers such as AmeriFlux, ICOS and NEON are vital for providing the necessary distributed observations to address interactions at the soil-vegetation-atmosphere interface. NEON, close to full operation with 47 tower sites, will represent the largest single-provider EC network globally. Its standardized observation and data processing suite is designed specifically for inter-site comparability and analysis of feedbacks across multiple spatial and temporal scales. Furthermore, NEON coordinates EC with rich contextual observations such as airborne remote sensing and in-situ sampling bouts. In January 2018 NEON enters its operational phase, and EC data products, software and services become fully available to the science community at large. These resources strive to incorporate lessons-learned through collaborations with AmeriFlux, ICOS, LTER and others, to suggest novel systemic solutions, and to synergize ongoing research efforts across science communities. Here, we present an overview of the ongoing product release, alongside efforts to integrate and collaborate with existing infrastructures, networks and communities. Near-real-time heat, water and carbon cycle observations in "basic" and "expanded", self-describing HDF5 formats become accessible from the NEON Data Portal, including an Application Program Interface. Subsequently, they are ingested into the AmeriFlux processing pipeline, together with inclusion in FLUXNET globally harmonized data releases. Software for reproducible, extensible and portable data analysis and science operations management also becomes available. This includes the eddy4R family of R-packages underlying the data product generation, together with the ability to directly participate in open development via GitHub version control and DockerHub image hosting. In addition, templates for science operations management include a web-based field maintenance application and a graphical user interface to simplify problem tracking and resolution along the entire data chain. We hope that this presentation can initiate further collaboration and synergies in challenge areas, and would appreciate input and discussion on continued development.

MaROS: Information Management Service

NASA Technical Reports Server (NTRS)

Allard, Daniel A.; Gladden, Roy E.; Wright, Jesse J.; Hy, Franklin H.; Rabideau, Gregg R.; Wallick, Michael N.

2011-01-01

This software is provided by the Mars Relay Operations Service (MaROS) task to a variety of Mars projects for the purpose of coordinating communications sessions between landed spacecraft assets and orbiting spacecraft assets at Mars. The Information Management Service centralizes a set of functions previously distributed across multiple spacecraft operations teams, and as such, greatly improves visibility into the end-to-end strategic coordination process. Most of the process revolves around the scheduling of communications sessions between the spacecraft during periods of time when a landed asset on Mars is geometrically visible by an orbiting spacecraft. These relay sessions are used to transfer data both to and from the landed asset via the orbiting asset on behalf of Earth-based spacecraft operators. This software component is an application process running as a Java virtual machine. The component provides all service interfaces via a Representational State Transfer (REST) protocol over https to external clients. There are two general interaction modes with the service: upload and download of data. For data upload, the service must execute logic specific to the upload data type and trigger any applicable calculations including pass delivery latencies and overflight conflicts. For data download, the software must retrieve and correlate requested information and deliver to the requesting client. The provision of this service enables several key advancements over legacy processes and systems. For one, this service represents the first time that end-to-end relay information is correlated into a single shared repository. The software also provides the first multimission latency calculator; previous latency calculations had been performed on a mission-by-mission basis.

Human computer interface guide, revision A

NASA Technical Reports Server (NTRS)

1993-01-01

The Human Computer Interface Guide, SSP 30540, is a reference document for the information systems within the Space Station Freedom Program (SSFP). The Human Computer Interface Guide (HCIG) provides guidelines for the design of computer software that affects human performance, specifically, the human-computer interface. This document contains an introduction and subparagraphs on SSFP computer systems, users, and tasks; guidelines for interactions between users and the SSFP computer systems; human factors evaluation and testing of the user interface system; and example specifications. The contents of this document are intended to be consistent with the tasks and products to be prepared by NASA Work Package Centers and SSFP participants as defined in SSP 30000, Space Station Program Definition and Requirements Document. The Human Computer Interface Guide shall be implemented on all new SSFP contractual and internal activities and shall be included in any existing contracts through contract changes. This document is under the control of the Space Station Control Board, and any changes or revisions will be approved by the deputy director.

New NED XML/VOtable Services and Client Interface Applications

NASA Astrophysics Data System (ADS)

Pevunova, O.; Good, J.; Mazzarella, J.; Berriman, G. B.; Madore, B.

2005-12-01

The NASA/IPAC Extragalactic Database (NED) provides data and cross-identifications for over 7 million extragalactic objects fused from thousands of survey catalogs and journal articles. The data cover all frequencies from radio through gamma rays and include positions, redshifts, photometry and spectral energy distributions (SEDs), sizes, and images. NED services have traditionally supplied data in HTML format for connections from Web browsers, and a custom ASCII data structure for connections by remote computer programs written in the C programming language. We describe new services that provide responses from NED queries in XML documents compliant with the international virtual observatory VOtable protocol. The XML/VOtable services support cone searches, all-sky searches based on object attributes (survey names, cross-IDs, redshifts, flux densities), and requests for detailed object data. Initial services have been inserted into the NVO registry, and others will follow soon. The first client application is a Style Sheet specification for rendering NED VOtable query results in Web browsers that support XML. The second prototype application is a Java applet that allows users to compare multiple SEDs. The new XML/VOtable output mode will also simplify the integration of data from NED into visualization and analysis packages, software agents, and other virtual observatory applications. We show an example SED from NED plotted using VOPlot. The NED website is: http://nedwww.ipac.caltech.edu.

Development/Testing of a Monitoring System Assisting MCI Patients: The European Project INLIFE.

PubMed

Kaimakamis, Evangelos; Karavidopoulou, Vaia; Kilintzis, Vassilios; Stefanopoulos, Leandros; Papageorgiou, Valentini

2017-01-01

INLIFE is a project cofounded from the European Union aiming in prolonging independent living of elderly people with cognitive impairment based on open, seamless ICT services supporting communication, daily activities, providing health services and professional care to the elderly. The main innovation stems from ICT solutions offering 19 different services adapted on specific characteristics elderly people with mild cognitive impairment, early and later stages of Dementia, cognitive impairment and co-morbid condition, as well as their formal and informal caregivers. All services have different focus areas and are incorporated into a unified system based on cloud architecture implemented in patients of 6 European countries, including Greece. More than 1200 patients, caregivers and healthcare providers participate in the pilot testing of the project. Primary parameter for assessing the effectiveness of the interventions is their impact on the quality of life of the elderly patients and their caregivers, contributing to prolonging independent living of the affected. A special digital platform has been developed in the Greek pilot site aiming to adapt and monitor all the implemented applications. This includes a medical decision support system that receives biosignals from patients and interaction interfaces in which all participants are involved. Recruitment and patients' participation has already started in the pilot site of Thessaloniki for the services that are to be tested in Greece.

ESA's Planetary Science Archive: Preserve and present reliable scientific data sets

NASA Astrophysics Data System (ADS)

Besse, S.; Vallat, C.; Barthelemy, M.; Coia, D.; Costa, M.; De Marchi, G.; Fraga, D.; Grotheer, E.; Heather, D.; Lim, T.; Martinez, S.; Arviset, C.; Barbarisi, I.; Docasal, R.; Macfarlane, A.; Rios, C.; Saiz, J.; Vallejo, F.

2018-01-01

The European Space Agency (ESA) Planetary Science Archive (PSA) is undergoing a significant refactoring of all its components to improve the services provided to the scientific community and the public. The PSA supports ESA's missions exploring the Solar System by archiving scientific peer-reviewed observations as well as engineering data sets. This includes the Giotto, SMART-1, Huygens, Venus Express, Mars Express, Rosetta, Exomars 2016, Exomars RSP, BepiColombo, and JUICE missions. The PSA is offering a newly designed graphical user interface which is simultaneously meant to maximize the interaction with scientific observations and also minimise the efforts needed to download these scientific observations. The PSA still offers the same services as before (i.e., FTP, documentation, helpdesk, etc.). In addition, it will support the two formats of the Planetary Data System (i.e., PDS3 and PDS4), as well as providing new ways for searching the data products with specific metadata and geometrical parameters. As well as enhanced services, the PSA will also provide new services to improve the visualisation of data products and scientific content (e.g., spectra, etc.). Together with improved access to the spacecraft engineering data sets, the PSA will provide easier access to scientific data products that will help to maximize the science return of ESA's space missions.

Going beyond the NASA Earthdata website: Reaching out to new audiences via social media and webinars

NASA Astrophysics Data System (ADS)

Bagwell, R.; Wong, M. M.; Brennan, J.; Murphy, K. J.; Behnke, J.

2014-12-01

This poster will introduce and explore the various social media efforts and monthly webinar series recently established by the National Aeronautics and Space Administration (NASA) Earth Observing System Data and Information System (EOSDIS) project. EOSDIS is a key core capability in NASA's Earth Science Data Systems Program. It provides end-to-end capabilities for managing NASA's Earth science data from various sources - satellites, aircraft, field measurements, and various other programs. Some of the capabilities include twelve Distributed Active Archive Centers (DAACs), Science Computing Facilities (SCFs), a data discovery and service access client (Reverb), dataset directory (Global Change Master Directory - GCMD), near real-time data (Land Atmosphere Near real-time Capability for EOS - LANCE), Worldview (an imagery visualization interface), Global Imagery Browse Services, the Earthdata Code Collaborative, and a host of other discipline specific data discovery, data access, data subsetting and visualization tools and services. We have embarked on these efforts to reach out to new audiences and potential new users and to engage our diverse end user communities world-wide. One of the key objectives is to increase awareness of the breadth of Earth science data information, services, and tools that are publicly available while also highlighting how these data and technologies enable scientific research.

Space-based Science Operations Grid Prototype

NASA Technical Reports Server (NTRS)

Bradford, Robert N.; Welch, Clara L.; Redman, Sandra

2004-01-01

Grid technology is the up and coming technology that is enabling widely disparate services to be offered to users that is very economical, easy to use and not available on a wide basis. Under the Grid concept disparate organizations generally defined as "virtual organizations" can share services i.e. sharing discipline specific computer applications, required to accomplish the specific scientific and engineering organizational goals and objectives. Grids are emerging as the new technology of the future. Grid technology has been enabled by the evolution of increasingly high speed networking. Without the evolution of high speed networking Grid technology would not have emerged. NASA/Marshall Space Flight Center's (MSFC) Flight Projects Directorate, Ground Systems Department is developing a Space-based Science Operations Grid prototype to provide to scientists and engineers the tools necessary to operate space-based science payloads/experiments and for scientists to conduct public and educational outreach. In addition Grid technology can provide new services not currently available to users. These services include mission voice and video, application sharing, telemetry management and display, payload and experiment commanding, data mining, high order data processing, discipline specific application sharing and data storage, all from a single grid portal. The Prototype will provide most of these services in a first step demonstration of integrated Grid and space-based science operations technologies. It will initially be based on the International Space Station science operational services located at the Payload Operations Integration Center at MSFC, but can be applied to many NASA projects including free flying satellites and future projects. The Prototype will use the Internet2 Abilene Research and Education Network that is currently a 10 Gb backbone network to reach the University of Alabama at Huntsville and several other, as yet unidentified, Space Station based science experimenters. There is an international aspect to the Grid involving the America's Pathway (AMPath) network, the Chilean REUNA Research and Education Network and the University of Chile in Santiago that will further demonstrate how extensive these services can be used. From the user's perspective, the Prototype will provide a single interface and logon to these varied services without the complexity of knowing the where's and how's of each service. There is a separate and deliberate emphasis on security. Security will be addressed by specifically outlining the different approaches and tools used. Grid technology, unlike the Internet, is being designed with security in mind. In addition we will show the locations, configurations and network paths associated with each service and virtual organization. We will discuss the separate virtual organizations that we define for the varied user communities. These will include certain, as yet undetermined, space-based science functions and/or processes and will include specific virtual organizations required for public and educational outreach and science and engineering collaboration. We will also discuss the Grid Prototype performance and the potential for further Grid applications both space-based and ground based projects and processes. In this paper and presentation we will detail each service and how they are integrated using Grid

The Keck Task Library (KTL)

NASA Technical Reports Server (NTRS)

Lupton, W. F.; Conrad, A. R.

1992-01-01

KTL is a set of routines which eases the job of writing applications which must interact with a variety of underlying sub-systems (known as services). A typical application is an X Window user interface coordinating telescope and instruments. In order to connect to a service, application code specifies a service name--typically an instrument name--and a style, which defines the way in which the application will interact with the service. Two styles are currently supported: keyword, where the application reads and writes named keywords and the resulting inter-task message traffic is hidden; and message, where the application deals directly with messages. The keyword style is intended mainly for user interfaces, and the message style is intended mainly for lower-level applications. KTL applications are event driven: a typical application first connects to all its desired services, then expresses interest in specified events. The application then enters an event dispatch loop in which it waits for events and calls the appropriate service's event-handling routine. Each event is associated with a call-back routine which is invoked when the event occurs. Call-back routines may (and typically do) interact with other sub-systems and KTL provides the means of doing so without blocking the application (vital for X Window user interfaces). This approach is a marriage of ideas culled from the X window, ADAM, Keck instrument, and Keck telescope control systems. A novel feature of KTL is that it knows nothing about any services or styles. Instead it defines a generic set of routines which must be implemented by all services and styles (essentially open(), ioctl(), read(), write(), event(), and close()) and activates sharable libraries at run-time. Services have been implemented (in both keyword and message styles) for HIRES (the Keck high resolution echelle spectrograph built by Lick Observatory), LWS (the Keck long wavelength spectrometer built by UC San Diego), and the Keck telescope. Each of these implementations uses different underlying message systems: the Lick MUSIC system, RPC's, and direct sockets (respectively). Services for the remaining three front-line Keck instruments will be implemented over the next few months.

SWE-based Observation Data Delivery from the Instrument to the User - Sensor Web Technology in the NeXOS Project

NASA Astrophysics Data System (ADS)

Jirka, Simon; del Rio, Joaquin; Toma, Daniel; Martinez, Enoc; Delory, Eric; Pearlman, Jay; Rieke, Matthes; Stasch, Christoph

2017-04-01

The rapidly evolving technology for building Web-based (spatial) information infrastructures and Sensor Webs, there are new opportunities to improve the process how ocean data is collected and managed. A central element in this development is the suite of Sensor Web Enablement (SWE) standards specified by the Open Geospatial Consortium (OGC). This framework of standards comprises on the one hand data models as well as formats for measurement data (ISO/OGC Observations and Measurement, O&M) and metadata describing measurement processes and sensors (OGC Sensor Model Language, SensorML). On the other hand the SWE standards comprise (Web service) interface specifications for pull-based access to observation data (OGC Sensor Observation Service, SOS) and for controlling or configuring sensors (OGC Sensor Planning Service, SPS). Also within the European INSPIRE framework the SWE standards play an important role as the SOS is the recommended download service interface for O&M-encoded observation data sets. In the context of the EU-funded Oceans of Tomorrow initiative the NeXOS (Next generation, Cost-effective, Compact, Multifunctional Web Enabled Ocean Sensor Systems Empowering Marine, Maritime and Fisheries Management) project is developing a new generation of in-situ sensors that make use of the SWE standards to facilitate the data publication process and the integration into Web based information infrastructures. This includes the development of a dedicated firmware for instruments and sensor platforms (SEISI, Smart Electronic Interface for Sensors and Instruments) maintained by the Universitat Politècnica de Catalunya (UPC). Among other features, SEISI makes use of OGC SWE standards such OGC-PUCK, to enable a plug-and-play mechanism for sensors based on SensorML encoded metadata. Thus, if a new instrument is attached to a SEISI-based platform, it automatically configures the connection to these instruments, automatically generated data files compliant with the ISO/OGC Observations and Measurements standard and initiates the data transmission into the NeXOS Sensor Web infrastructure. Besides these platform-related developments, NeXOS has realised the full path of data transmission from the sensor to the end user application. The conceptual architecture design is implemented by a series of open source SWE software packages provided by 52°North. This comprises especially different SWE server components (i.e. OGC Sensor Observation Service), tools for data visualisation (e.g. the 52°North Helgoland SOS viewer), and an editor for providing SensorML-based metadata (52°North smle). As a result, NeXOS has demonstrated how the SWE standards help to improve marine observation data collection. Within this presentation, we will present the experiences and findings of the NeXOS project and will provide recommendation for future work directions.

Reducing Stressful Aspects of Information Technology in Public Services.

ERIC Educational Resources Information Center

Quinn, Brian

1995-01-01

Identifies sources of technological stress for public services librarians and patrons and proposes ways to reduce stress, including communicating with staff, implementing a system gradually, providing adequate training, creating proper documentation, planning, considering ergonomics in hardware and software selection, selecting a good interface,…

The ESGF Software Stack: a Configurable and Extensible Framework for Enabling Access to Geospatial Data

NASA Astrophysics Data System (ADS)

Cinquini, L.; Bell, G. M.; Williams, D.; Harney, J.

2012-12-01

The Earth System Grid Federation (ESGF) is a multi-agency, international collaboration that aims at developing state-of-the-art services for the management and access of Earth system data. ESGF is currently used to serve the totality of the model output used for the forthcoming IPCC 5th assessment report on climate change, as well as supporting observational and reanalysis datasets. Also, it is been adopted by several other projects that focus on global, regional and local climate modeling. The ESGF software stack is composed of several modular applications that cover related but disjoint areas of functionality: data publishing, data search and discovery, data access, user management, security, and federation. Overall, the ESGF infrastructure offers a configurable end-to-end solution to the problem of enabling web-based access to large amounts of geospatial data. This talk will present the architectural and configuration options that are available to a data provider leveraging ESGF to serve their data: which services to expose, how to scale to larger data collections, how to establish access control, how to customize the user interface, and others. Additionally, the framework provides extension points that allow each site to plug in custom functionality such as crawling of specific metadata repositories, exposing domain-specific analysis and visualization services, developing custom access clients that interact with the system APIs. These configuration and extension capabilities are based on simple but effective domain-specific object models, that underpin the software applications: the data model, the security model, and the federation model. The ESGF software stack is developed collaboratively by software engineers at many institutions around the world, and is made freely available to the community under an open source license to promote adoption, reuse, inspection and continuous improvement.

Adsorption of naphthalene and ozone on atmospheric air/ice interfaces coated with surfactants: a molecular simulation study.

PubMed

Liyana-Arachchi, Thilanga P; Valsaraj, Kalliat T; Hung, Francisco R

2012-03-15

The adsorption of gas-phase naphthalene and ozone molecules onto air/ice interfaces coated with different surfactant species (1-octanol, 1-hexadecanol, or 1-octanal) was investigated using classical molecular dynamics (MD) simulations. Naphthalene and ozone exhibit a strong preference to be adsorbed at the surfactant-coated air/ice interfaces, as opposed to either being dissolved into the bulk of the quasi-liquid layer (QLL) or being incorporated into the ice crystals. The QLL becomes thinner when the air/ice interface is coated with surfactant molecules. The adsorption of both naphthalene and ozone onto surfactant-coated air/ice interfaces is enhanced when compared to bare air/ice interface. Both naphthalene and ozone tend to stay dissolved in the surfactant layer and close to the QLL, rather than adsorbing on top of the surfactant molecules and close to the air region of our systems. Surfactants prefer to orient at a tilted angle with respect to the air/ice interface; the angular distribution and the most preferred angle vary depending on the hydrophilic end group, the length of the hydrophobic tail, and the surfactant concentration at the air/ice interface. Naphthalene prefers to have a flat orientation on the surfactant coated air/ice interface, except at high concentrations of 1-hexadecanol at the air/ice interface; the angular distribution of naphthalene depends on the specific surfactant and its concentration at the air/ice interface. The dynamics of naphthalene molecules at the surfactant-coated air/ice interface slow down as compared to those observed at bare air/ice interfaces. The presence of surfactants does not seem to affect the self-association of naphthalene molecules at the air/ice interface, at least for the specific surfactants and the range of concentrations considered in this study.

BCube: Building a Geoscience Brokering Framework

NASA Astrophysics Data System (ADS)

Jodha Khalsa, Siri; Nativi, Stefano; Duerr, Ruth; Pearlman, Jay

2014-05-01

BCube is addressing the need for effective and efficient multi-disciplinary collaboration and interoperability through the advancement of brokering technologies. As a prototype "building block" for NSF's EarthCube cyberinfrastructure initiative, BCube is demonstrating how a broker can serve as an intermediary between information systems that implement well-defined interfaces, thereby providing a bridge between communities that employ different specifications. Building on the GEOSS Discover and Access Broker (DAB), BCube will develop new modules and services including: • Expanded semantic brokering capabilities • Business Model support for work flows • Automated metadata generation • Automated linking to services discovered via web crawling • Credential passing for seamless access to data • Ranking of search results from brokered catalogs Because facilitating cross-discipline research involves cultural and well as technical challenges, BCube is also addressing the sociological and educational components of infrastructure development. We are working, initially, with four geoscience disciplines: hydrology, oceans, polar and weather, with an emphasis on connecting existing domain infrastructure elements to facilitate cross-domain communications.

Charter for Systems Engineer Working Group

NASA Technical Reports Server (NTRS)

Suffredini, Michael T.; Grissom, Larry

2015-01-01

This charter establishes the International Space Station Program (ISSP) Mobile Servicing System (MSS) Systems Engineering Working Group (SEWG). The MSS SEWG is established to provide a mechanism for Systems Engineering for the end-to-end MSS function. The MSS end-to-end function includes the Space Station Remote Manipulator System (SSRMS), the Mobile Remote Servicer (MRS) Base System (MBS), Robotic Work Station (RWS), Special Purpose Dexterous Manipulator (SPDM), Video Signal Converters (VSC), and Operations Control Software (OCS), the Mobile Transporter (MT), and by interfaces between and among these elements, and United States On-Orbit Segment (USOS) distributed systems, and other International Space Station Elements and Payloads, (including the Power Data Grapple Fixtures (PDGFs), MSS Capture Attach System (MCAS) and the Mobile Transporter Capture Latch (MTCL)). This end-to-end function will be supported by the ISS and MSS ground segment facilities. This charter defines the scope and limits of the program authority and document control that is delegated to the SEWG and it also identifies the panel core membership and specific operating policies.

A new IPQAM modulator with high integrated degree for digital TV

NASA Astrophysics Data System (ADS)

He, Yejun; Liu, Deming; Zhu, Guangxi; Jiang, Tao; Sun, Gongxian

2008-12-01

As video on demand (VOD) services are deployed, cable operators will experience a fundamental shift in their business, moving from broadcast to unicast content delivery. Another significant change is the introduction of Gigabit Ethernet into their network, which is providing an unprecedented opportunity to turn the cable operator's infrastructure into a sustainable competitive advantage. However, Gigabit Ethernet is more than just transport; it's the foundation of the Next-Generation Digital Video Network. IPQAM modulator, which is a main equipment, aren't made in China so far. It is the first time that we did design IPQAM modulator and will apply it to interactive TV based on DWDM (dense wavelength-division multiplexing). This paper introduces the principle of IPQAM modulator and transmission approach. The differences between IPQAM and conventional QAM are analysed. Some key techniques such as scrambling, statistical multiplexing, Data over Cable Service Interface Specification (DOCSIS) 3.0, software defined radio as well as DVB simulcrypt are also studied.

Intelligent community management system based on the devicenet fieldbus

NASA Astrophysics Data System (ADS)

Wang, Yulan; Wang, Jianxiong; Liu, Jiwen

2013-03-01

With the rapid development of the national economy and the improvement of people's living standards, people are making higher demands on the living environment. And the estate management content, management efficiency and service quality have been higher required. This paper in-depth analyzes about the intelligent community of the structure and composition. According to the users' requirements and related specifications, it achieves the district management systems, which includes Basic Information Management: the management level of housing, household information management, administrator-level management, password management, etc. Service Management: standard property costs, property charges collecting, the history of arrears and other property expenses. Security Management: household gas, water, electricity and security and other security management, security management district and other public places. Systems Management: backup database, restore database, log management. This article also carries out on the Intelligent Community System analysis, proposes an architecture which is based on B / S technology system. And it has achieved a global network device management with friendly, easy to use, unified human - machine interface.

Coverage of Community-Based Management of Severe Acute Malnutrition Programmes in Twenty-One Countries, 2012-2013

PubMed Central

Rogers, Eleanor; Myatt, Mark; Woodhead, Sophie; Guerrero, Saul; Alvarez, Jose Luis

2015-01-01

Objective This paper reviews coverage data from programmes treating severe acute malnutrition (SAM) collected between July 2012 and June 2013. Design This is a descriptive study of coverage levels and barriers to coverage collected by coverage assessments of community-based SAM treatment programmes in 21 countries that were supported by the Coverage Monitoring Network. Data from 44 coverage assessments are reviewed. Setting These assessments analyse malnourished populations from 6 to 59 months old to understand the accessibility and coverage of services for treatment of acute malnutrition. The majority of assessments are from sub-Saharan Africa. Results Most of the programmes (33 of 44) failed to meet context-specific internationally agreed minimum standards for coverage. The mean level of estimated coverage achieved by the programmes in this analysis was 38.3%. The most frequently reported barriers to access were lack of awareness of malnutrition, lack of awareness of the programme, high opportunity costs, inter-programme interface problems, and previous rejection. Conclusions This study shows that coverage of CMAM is lower than previous analyses of early CTC programmes; therefore reducing programme impact. Barriers to access need to be addressed in order to start improving coverage by paying greater attention to certain activities such as community sensitisation. As barriers are interconnected focusing on specific activities, such as decentralising services to satellite sites, is likely to increase significantly utilisation of nutrition services. Programmes need to ensure that barriers are continuously monitored to ensure timely removal and increased coverage. PMID:26042827