Critical Issues in Research Design in Action Research in an SME Development Context

ERIC Educational Resources Information Center

McGrath, Helen; O'Toole, Thomas

2012-01-01

Purpose: The main aim of this paper is to develop guidelines on the critical issues to consider in research design in an action research (AR) environment for SME network capability development. Design/methodology/approach: The issues in research design for AR studies are developed from the authors' experience in running learning sets but, in…

Designing application software in wide area network settings

NASA Technical Reports Server (NTRS)

Makpangou, Mesaac; Birman, Ken

1990-01-01

Progress in methodologies for developing robust local area network software has not been matched by similar results for wide area settings. The design of application software spanning multiple local area environments is examined. For important classes of applications, simple design techniques are presented that yield fault tolerant wide area programs. An implementation of these techniques as a set of tools for use within the ISIS system is described.

A Universal Design for Robotics Education

ERIC Educational Resources Information Center

Bülbül, Mustafa Sahin

2017-01-01

In this century, technological and educational needs increase drastically. Out of local language, educators need to teach robotic language and use necessary technologies to design robots like with the Arduino set. Users may develop their own robots with this set. It also improves design and implementation skills. However, it is not a suitable…

Eight-step method to build the clinical content of an evidence-based care pathway: the case for COPD exacerbation

PubMed Central

2012-01-01

Background Optimization of the clinical care process by integration of evidence-based knowledge is one of the active components in care pathways. When studying the impact of a care pathway by using a cluster-randomized design, standardization of the care pathway intervention is crucial. This methodology paper describes the development of the clinical content of an evidence-based care pathway for in-hospital management of chronic obstructive pulmonary disease (COPD) exacerbation in the context of a cluster-randomized controlled trial (cRCT) on care pathway effectiveness. Methods The clinical content of a care pathway for COPD exacerbation was developed based on recognized process design and guideline development methods. Subsequently, based on the COPD case study, a generalized eight-step method was designed to support the development of the clinical content of an evidence-based care pathway. Results A set of 38 evidence-based key interventions and a set of 24 process and 15 outcome indicators were developed in eight different steps. Nine Belgian multidisciplinary teams piloted both the set of key interventions and indicators. The key intervention set was judged by the teams as being valid and clinically applicable. In addition, the pilot study showed that the indicators were feasible for the involved clinicians and patients. Conclusions The set of 38 key interventions and the set of process and outcome indicators were found to be appropriate for the development and standardization of the clinical content of the COPD care pathway in the context of a cRCT on pathway effectiveness. The developed eight-step method may facilitate multidisciplinary teams caring for other patient populations in designing the clinical content of their future care pathways. PMID:23190552

Knowledge Interaction Design for Creative Knowledge Work

NASA Astrophysics Data System (ADS)

Nakakoji, Kumiyo; Yamamoto, Yasuhiro

This paper describes our approach for the development of application systems for creative knowledge work, particularly for early stages of information design tasks. Being a cognitive tool serving as a means of externalization, an application system affects how the user is engaged in the creative process through its visual interaction design. Knowledge interaction design described in this paper is a framework where a set of application systems for different information design domains are developed based on an interaction model, which is designed for a particular model of a thinking process. We have developed two sets of application systems using the knowledge interaction design framework: one includes systems for linear information design, such as writing, movie-editing, and video-analysis; the other includes systems for network information design, such as file-system navigation and hypertext authoring. Our experience shows that the resulting systems encourage users to follow a certain cognitive path through graceful user experience.

The research on electronic commerce security payment system based on set protocol

NASA Astrophysics Data System (ADS)

Guo, Hongliang

2012-04-01

With the rapid development of network technology, online transactions have become more and more common. In this paper, we firstly introduce the principle and the basic principal and technical foundation of SET, and then we analyze the progress of designing a system in the foundation of the procedure of the electronic business based on SET. On this basis, we design a system of the Payment System for Electronic Business. It will not only take on crucial realism signification for large-scale, medium-sized and mini-type corporations, but also provide guide meaning with programmer and design-developer to realize Electronic Commerce (EC).

User-Centered Design for Psychosocial Intervention Development and Implementation

PubMed Central

Lyon, Aaron R.; Koerner, Kelly

2018-01-01

The current paper articulates how common difficulties encountered when attempting to implement or scale-up evidence-based treatments are exacerbated by fundamental design problems, which may be addressed by a set of principles and methods drawn from the contemporary field of user-centered design. User-centered design is an approach to product development that grounds the process in information collected about the individuals and settings where products will ultimately be used. To demonstrate the utility of this perspective, we present four design concepts and methods: (a) clear identification of end users and their needs, (b) prototyping/rapid iteration, (c) simplifying existing intervention parameters/procedures, and (d) exploiting natural constraints. We conclude with a brief design-focused research agenda for the developers and implementers of evidence-based treatments. PMID:29456295

Modeling and Simulation Tools for Heavy Lift Airships

NASA Technical Reports Server (NTRS)

Hochstetler, Ron; Chachad, Girish; Hardy, Gordon; Blanken, Matthew; Melton, John

2016-01-01

For conventional fixed wing and rotary wing aircraft a variety of modeling and simulation tools have been developed to provide designers the means to thoroughly investigate proposed designs and operational concepts. However, lighter-than-air (LTA) airships, hybrid air vehicles, and aerostats have some important aspects that are different from heavier-than-air (HTA) vehicles. In order to account for these differences, modifications are required to the standard design tools to fully characterize the LTA vehicle design and performance parameters.. To address these LTA design and operational factors, LTA development organizations have created unique proprietary modeling tools, often at their own expense. An expansion of this limited LTA tool set could be accomplished by leveraging existing modeling and simulation capabilities available in the National laboratories and public research centers. Development of an expanded set of publicly available LTA modeling and simulation tools for LTA developers would mitigate the reliance on proprietary LTA design tools in use today. A set of well researched, open source, high fidelity LTA design modeling and simulation tools would advance LTA vehicle development and also provide the analytical basis for accurate LTA operational cost assessments. This paper will present the modeling and analysis tool capabilities required for LTA vehicle design, analysis of operations, and full life-cycle support. A survey of the tools currently available will be assessed to identify the gaps between their capabilities and the LTA industry's needs. Options for development of new modeling and analysis capabilities to supplement contemporary tools will also be presented.

Programming Design Guide for Computer Implementation of Job Aid for Selecting Instructional Setting. Final Report.

ERIC Educational Resources Information Center

Schulz, Russel E.; And Others

This Programming Design Guide (PDG) was developed to permit the offline Job Aid for Selecting Instructional Setting, which is one of 13 job aids presently available for use with the Instructional Systems Development (ISD) model, to be available in an inquiry-type, online version. It is intended to provide computer programmers with all of the…

Baseball Stadium Design: Teaching Engineering Economics and Technical Communication in a Multi-Disciplinary Setting.

ERIC Educational Resources Information Center

Dahm, Kevin; Newell, James

2001-01-01

Reports on a course at Rowan University, based on the economic design of a baseball stadium, that offers an introduction to multidisciplinary engineering design linked with formal training in technical communication. Addresses four pedagogical goals: (1) developing public speaking skills in a realistic, business setting; (2) giving students…

Initial development of prototype performance model for highway design

DOT National Transportation Integrated Search

1997-12-01

The Federal Highway Administration (FHWA) has undertaken a multiyear project to develop the Interactive Highway Safety Design Model (IHSDM), which is a CADD-based integrated set of software tools to analyze a highway design to identify safety issues ...

Coal gasification systems engineering and analysis, volume 2

NASA Technical Reports Server (NTRS)

1980-01-01

The major design related features of each generic plant system were characterized in a catalog. Based on the catalog and requirements data, approximately 17 designs and cost estimates were developed for MBG and alternate products. A series of generic trade studies was conducted to support all of the design studies. A set of cost and programmatic analyses were conducted to supplement the designs. The cost methodology employed for the design and sensitivity studies was documented and implemented in a computer program. Plant design and construction schedules were developed for the K-T, Texaco, and B&W MBG plant designs. A generic work breakdown structure was prepared, based on the K-T design, to coincide with TVA's planned management approach. An extensive set of cost sensitivity analyses was completed for K-T, Texaco, and B&W design. Product price competitiveness was evaluated for MBG and the alternate products. A draft management policy and procedures manual was evaluated. A supporting technology development plan was developed to address high technology risk issues. The issues were identified and ranked in terms of importance and tractability, and a plan developed for obtaining data or developing technology required to mitigate the risk.

Robust Design Optimization via Failure Domain Bounding

NASA Technical Reports Server (NTRS)

Crespo, Luis G.; Kenny, Sean P.; Giesy, Daniel P.

2007-01-01

This paper extends and applies the strategies recently developed by the authors for handling constraints under uncertainty to robust design optimization. For the scope of this paper, robust optimization is a methodology aimed at problems for which some parameters are uncertain and are only known to belong to some uncertainty set. This set can be described by either a deterministic or a probabilistic model. In the methodology developed herein, optimization-based strategies are used to bound the constraint violation region using hyper-spheres and hyper-rectangles. By comparing the resulting bounding sets with any given uncertainty model, it can be determined whether the constraints are satisfied for all members of the uncertainty model (i.e., constraints are feasible) or not (i.e., constraints are infeasible). If constraints are infeasible and a probabilistic uncertainty model is available, upper bounds to the probability of constraint violation can be efficiently calculated. The tools developed enable approximating not only the set of designs that make the constraints feasible but also, when required, the set of designs for which the probability of constraint violation is below a prescribed admissible value. When constraint feasibility is possible, several design criteria can be used to shape the uncertainty model of performance metrics of interest. Worst-case, least-second-moment, and reliability-based design criteria are considered herein. Since the problem formulation is generic and the tools derived only require standard optimization algorithms for their implementation, these strategies are easily applicable to a broad range of engineering problems.

The Factors of Design on Playing Equipment in Young Children Schools by Viewpoint of Young Children Behavioral Development

ERIC Educational Resources Information Center

Kuo, Chuen-tzay

2009-01-01

The main purpose of this study was to explore the care-givers of preschool education institutions whose cognition on playing equipment functions, conditions of both setting and using, and the main factors which should beware of design. Besides, not only constructed the factors of design, but also provided suggestions about setting and designing of…

Developing a "Semi-Systematic" Approach to Using Large-Scale Data-Sets for Small-Scale Interventions: The "Baby Matterz" Initiative as a Case Study

ERIC Educational Resources Information Center

O'Brien, Mark

2011-01-01

The appropriateness of using statistical data to inform the design of any given service development or initiative often depends upon judgements regarding scale. Large-scale data sets, perhaps national in scope, whilst potentially important in informing the design, implementation and roll-out of experimental initiatives, will often remain unused…

The Development of a Resource for Physically Active School Settings

ERIC Educational Resources Information Center

Bradley, Vicki R.; O'Connor, Justen P.

2009-01-01

This project describes the development of a resource designed to facilitate the exploration of factors influencing physical activity within school settings across multiple levels. Using a socio-ecological framework, the study draws upon factors across three domains that potentially impact physical activity levels within school settings: The…

An Ethnographically Informed Participatory Design of Primary Healthcare Information Technology in a Developing Country Setting.

PubMed

Shidende, Nima Herman; Igira, Faraja Teddy; Mörtberg, Christina Margaret

2017-01-01

Ethnography, with its emphasis on understanding activities where they occur, and its use of qualitative data gathering techniques rich in description, has a long tradition in Participatory Design (PD). Yet there are limited methodological insights in its application in developing countries. This paper proposes an ethnographically informed PD approach, which can be applied when designing Primary Healthcare Information Technology (PHIT). We use findings from a larger multidisciplinary project, Health Information Systems Project (HISP) to elaborate how ethnography can be used to facilitate participation of health practitioners in developing countries settings as well as indicating the importance of ethnographic approach to participatory Health Information Technology (HIT) designers. Furthermore, the paper discusses the pros and cons of using an ethnographic approach in designing HIT.

Testing and Evaluating C3I Systems That Employ AI. Volume 4. Published Articles

DTIC Science & Technology

1991-01-31

development performance in an naming, design and actions The system ’ s & Sophisticated system organizational setting) evaluated in a classroom setting by...observing designed as an intelligent the system in use and administering training aid in r questionnaires . Observers videotape and tave classroom setting...notes to assess how both students and instructors use the system in an actual classroom setting. Questionnaires are administered to both students and

Using Intervention Mapping for child development and wellbeing programs in early childhood education and care settings.

PubMed

O'Connor, Amanda; Blewitt, Claire; Nolan, Andrea; Skouteris, Helen

2018-06-01

Supporting children's social and emotional learning benefits all elements of children's development and has been associated with positive mental health and wellbeing, development of values and life skills. However, literature relating to the creation of interventions designed for use within the early childhood education and care settings to support children's social and emotional skills and learning is lacking. Intervention Mapping (IM) is a systematic intervention development framework, utilising principles centred on participatory co-design methods, multiple theoretical approaches and existing literature to enable effective decision-making during the development process. Early childhood pedagogical programs are also shaped by these principles; however, educators tend to draw on implicit knowledge when working with families. IM offers this sector the opportunity to formally incorporate theoretical, evidence-based research into the development of early childhood education and care social and emotional interventions. Emerging literature indicates IM is useful for designing health and wellbeing interventions for children within early childhood education and care settings. Considering the similar underlying principles of IM, existing applications within early childhood education and care and development of interventions beyond health behaviour change, it is recommended IM be utilised to design early childhood education and care interventions focusing on supporting children's social and emotional development. Copyright © 2018 Elsevier Ltd. All rights reserved.

Developing Digital Courseware for a Virtual Nano-Biotechnology Laboratory: A Design-Based Research Approach

ERIC Educational Resources Information Center

Yueh, Hsiu-Ping; Chen, Tzy-Ling; Lin, Weijane; Sheen, Horn-Jiunn

2014-01-01

This paper first reviews applications of multimedia in engineering education, especially in laboratory learning. It then illustrates a model and accreditation criteria adopted for developing a specific set of nanotechnology laboratory courseware and reports the design-based research approach used in designing and developing the e-learning…

Three Preparatory Schools' Syllabus Designs in the Turkish Republic of Northern Cyprus

ERIC Educational Resources Information Center

Bensen, Hanife; Silman, Fatos

2012-01-01

Problem Statement: Curriculum development involves the process of planning, setting up and running courses. The knowledge about designing syllabi, making choices of content and materials and assessing student performances plays an important role in curriculum development. Syllabus design is one aspect of curriculum development. It covers the kind…

Design of Landing PODS for Near Earth Asteroids

NASA Astrophysics Data System (ADS)

Frampton, R. V.; Ball, J. M.; Pellz, L.

2014-06-01

Boeing has been developing design for a set of small landing PODS that could be deployed from a spacecraft bus orbiting a NEA to address the set of SKGs for investigation prior to crewed missions to Near Earth Asteroids or the moons of Mars.

Gameplay Engagement and Learning in Game-Based Learning: A Systematic Review

ERIC Educational Resources Information Center

Abdul Jabbar, Azita Iliya; Felicia, Patrick

2015-01-01

In this review, we investigated game design features that promote engagement and learning in game-based learning (GBL) settings. The aim was to address the lack of empirical evidence on the impact of game design on learning outcomes, identify how the design of game-based activities may affect learning and engagement, and develop a set of general…

Development and Formative Evaluation of Multimedia Case Studies for Instructional Design and Technology Students

ERIC Educational Resources Information Center

Sugar, William

2014-01-01

This study describes the development of three case studies that included a combination of multimedia production and instructional design skills within a particular setting. These case studies incorporated real-life incidents from 47 professional instructional designers. These instructional designers described a total of 146 activities involving…

System engineering techniques for establishing balanced design and performance guidelines for the advanced telerobotic testbed

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.; Matijevic, J. R.

1987-01-01

Novel system engineering techniques have been developed and applied to establishing structured design and performance objectives for the Telerobotics Testbed that reduce technical risk while still allowing the testbed to demonstrate an advancement in state-of-the-art robotic technologies. To estblish the appropriate tradeoff structure and balance of technology performance against technical risk, an analytical data base was developed which drew on: (1) automation/robot-technology availability projections, (2) typical or potential application mission task sets, (3) performance simulations, (4) project schedule constraints, and (5) project funding constraints. Design tradeoffs and configuration/performance iterations were conducted by comparing feasible technology/task set configurations against schedule/budget constraints as well as original program target technology objectives. The final system configuration, task set, and technology set reflected a balanced advancement in state-of-the-art robotic technologies, while meeting programmatic objectives and schedule/cost constraints.

In Search of Design Principles for Developing Digital Learning and Performance Support for a Student Design Task

ERIC Educational Resources Information Center

Bollen, Lars; van der Meij, Hans; Leemkuil, Henny; McKenney, Susan

2015-01-01

A digital learning and performance support environment for university student design tasks was developed. This paper describes on the design rationale, process, and the usage results to arrive at a core set of design principles for the construction of such an environment. We present a collection of organizational, technical, and course-related…

Design Patterns for Digital Item Types in Higher Education

ERIC Educational Resources Information Center

Draaijer, S.; Hartog, R. J. M.

2007-01-01

A set of design patterns for digital item types has been developed in response to challenges identified in various projects by teachers in higher education. The goal of the projects in question was to design and develop formative and summative tests, and to develop interactive learning material in the form of quizzes. The subject domains involved…

Making Sense of Clinical Practice: Order Set Design Strategies in CPOE

PubMed Central

Novak, Laurie L.

2007-01-01

A case study was conducted during the customization phase of a commercial CPOE system at a multi-hospital, academic health system. The study focused on the development of order sets. Three distinct approaches to order set development were observed: Empirical, Local Consensus and Departmental. The three approaches are first described and then examined using the framework of sensemaking. Different approaches to sensemaking in the context of order set development reflect variations in sources of knowledge related to the standardization of care. PMID:18693900

Paving the COWpath: data-driven design of pediatric order sets

PubMed Central

Zhang, Yiye; Padman, Rema; Levin, James E

2014-01-01

Objective Evidence indicates that users incur significant physical and cognitive costs in the use of order sets, a core feature of computerized provider order entry systems. This paper develops data-driven approaches for automating the construction of order sets that match closely with user preferences and workflow while minimizing physical and cognitive workload. Materials and methods We developed and tested optimization-based models embedded with clustering techniques using physical and cognitive click cost criteria. By judiciously learning from users’ actual actions, our methods identify items for constituting order sets that are relevant according to historical ordering data and grouped on the basis of order similarity and ordering time. We evaluated performance of the methods using 47 099 orders from the year 2011 for asthma, appendectomy and pneumonia management in a pediatric inpatient setting. Results In comparison with existing order sets, those developed using the new approach significantly reduce the physical and cognitive workload associated with usage by 14–52%. This approach is also capable of accommodating variations in clinical conditions that affect order set usage and development. Discussion There is a critical need to investigate the cognitive complexity imposed on users by complex clinical information systems, and to design their features according to ‘human factors’ best practices. Optimizing order set generation using cognitive cost criteria introduces a new approach that can potentially improve ordering efficiency, reduce unintended variations in order placement, and enhance patient safety. Conclusions We demonstrate that data-driven methods offer a promising approach for designing order sets that are generalizable, data-driven, condition-based, and up to date with current best practices. PMID:24674844

Vignette Question Design for the Assessment of Graduate Sustainability Learning Outcomes

ERIC Educational Resources Information Center

Sandri, Orana; Holdsworth, Sarah; Thomas, Ian

2018-01-01

The development of university wide graduate attributes has become an important mechanism for setting generic learning outcomes across higher education institutions. Many universities around the world have developed sets of graduate attributes that they aim to develop through degree programs. Sustainability related attributes have been included in…

An investigation of modelling and design for software service applications.

PubMed

Anjum, Maria; Budgen, David

2017-01-01

Software services offer the opportunity to use a component-based approach for the design of applications. However, this needs a deeper understanding of how to develop service-based applications in a systematic manner, and of the set of properties that need to be included in the 'design model'. We have used a realistic application to explore systematically how service-based designs can be created and described. We first identified the key properties of an SOA (service oriented architecture) and then undertook a single-case case study to explore its use in the development of a design for a large-scale application in energy engineering, modelling this with existing notations wherever possible. We evaluated the resulting design model using two walkthroughs with both domain and application experts. We were able to successfully develop a design model around the ten properties identified, and to describe it by adapting existing design notations. A component-based approach to designing such systems does appear to be feasible. However, it needs the assistance of a more integrated set of notations for describing the resulting design model.

An investigation of modelling and design for software service applications

PubMed Central

2017-01-01

Software services offer the opportunity to use a component-based approach for the design of applications. However, this needs a deeper understanding of how to develop service-based applications in a systematic manner, and of the set of properties that need to be included in the ‘design model’. We have used a realistic application to explore systematically how service-based designs can be created and described. We first identified the key properties of an SOA (service oriented architecture) and then undertook a single-case case study to explore its use in the development of a design for a large-scale application in energy engineering, modelling this with existing notations wherever possible. We evaluated the resulting design model using two walkthroughs with both domain and application experts. We were able to successfully develop a design model around the ten properties identified, and to describe it by adapting existing design notations. A component-based approach to designing such systems does appear to be feasible. However, it needs the assistance of a more integrated set of notations for describing the resulting design model. PMID:28489905

A Set of Patterns for the Structured Design of MOOCs

ERIC Educational Resources Information Center

Warburton, Steven; Mor, Yishay

2015-01-01

A design pattern approach, in the form of participatory pattern workshops, has been used to explore the design approaches that experts in the field of online learning have used to develop and deliver Massive Open Online Courses (MOOCs). Over the course of 3 intensive workshops a total of 20 design patterns were developed from shared narratives of…

Design, Development and Application of New, High-Performance Gear Steels

DTIC Science & Technology

2010-02-01

thesis work focused on design principles for advanced carburized bearing steels . He also received a Master of Product Development degree from...Design computational design technology to develop a new class of high-strength, secondary hardening gear steels that are optimized for high-temperature...high contact fatigue resistance, which makes it a candidate for applications such as camshafts and bearings , as well as gear sets. (Printed with

DHM simulation in virtual environments: a case-study on control room design.

PubMed

Zamberlan, M; Santos, V; Streit, P; Oliveira, J; Cury, R; Negri, T; Pastura, F; Guimarães, C; Cid, G

2012-01-01

This paper will present the workflow developed for the application of serious games in the design of complex cooperative work settings. The project was based on ergonomic studies and development of a control room among participative design process. Our main concerns were the 3D human virtual representation acquired from 3D scanning, human interaction, workspace layout and equipment designed considering ergonomics standards. Using Unity3D platform to design the virtual environment, the virtual human model can be controlled by users on dynamic scenario in order to evaluate the new work settings and simulate work activities. The results obtained showed that this virtual technology can drastically change the design process by improving the level of interaction between final users and, managers and human factors team.

Tool for Rapid Analysis of Monte Carlo Simulations

NASA Technical Reports Server (NTRS)

Restrepo, Carolina; McCall, Kurt E.; Hurtado, John E.

2011-01-01

Designing a spacecraft, or any other complex engineering system, requires extensive simulation and analysis work. Oftentimes, the large amounts of simulation data generated are very di cult and time consuming to analyze, with the added risk of overlooking potentially critical problems in the design. The authors have developed a generic data analysis tool that can quickly sort through large data sets and point an analyst to the areas in the data set that cause specific types of failures. The Tool for Rapid Analysis of Monte Carlo simulations (TRAM) has been used in recent design and analysis work for the Orion vehicle, greatly decreasing the time it takes to evaluate performance requirements. A previous version of this tool was developed to automatically identify driving design variables in Monte Carlo data sets. This paper describes a new, parallel version, of TRAM implemented on a graphical processing unit, and presents analysis results for NASA's Orion Monte Carlo data to demonstrate its capabilities.

Description of the control system design for the SSF PMAD DC testbed

NASA Technical Reports Server (NTRS)

Baez, Anastacio N.; Kimnach, Greg L.

1991-01-01

The Power Management and Distribution (PMAD) DC Testbed Control System for Space Station Freedom was developed using a top down approach based on classical control system and conventional terrestrial power utilities design techniques. The design methodology includes the development of a testbed operating concept. This operating concept describes the operation of the testbed under all possible scenarios. A unique set of operating states was identified and a description of each state, along with state transitions, was generated. Each state is represented by a unique set of attributes and constraints, and its description reflects the degree of system security within which the power system is operating. Using the testbed operating states description, a functional design for the control system was developed. This functional design consists of a functional outline, a text description, and a logical flowchart for all the major control system functions. Described here are the control system design techniques, various control system functions, and the status of the design and implementation.

Design of Mechanisms for Deployable, Optical Instruments: Guidelines for Reducing Hysteresis

NASA Technical Reports Server (NTRS)

Lake, Mark S.; Hachkowski, M. Roman

2000-01-01

This paper is intended to facilitate the development of deployable, optical instruments by providing a rational approach for the design, testing, and qualification of high-precision (i.e., low-hysteresis) deployment mechanisms for these instruments. Many of the guidelines included herein come directly from the field of optomechanical engineering, and are, therefore, neither newly developed guidelines, nor are they uniquely applicable to the design of high-precision deployment mechanisms. This paper is to be regarded as a guide to design and not a set of NASA requirements, except as may be defined in formal project specifications. Furthermore, due to the rapid pace of advancement in the field of precision deployment, this paper should be regarded as a preliminary set of guidelines. However, it is expected that this paper, with revisions as experience may indicate to be desirable, might eventually form the basis for a set of uniform design requirements for high-precision deployment mechanisms on future NASA space-based science instruments.

Modeling design iteration in product design and development and its solution by a novel artificial bee colony algorithm.

PubMed

Chen, Tinggui; Xiao, Renbin

2014-01-01

Due to fierce market competition, how to improve product quality and reduce development cost determines the core competitiveness of enterprises. However, design iteration generally causes increases of product cost and delays of development time as well, so how to identify and model couplings among tasks in product design and development has become an important issue for enterprises to settle. In this paper, the shortcomings existing in WTM model are discussed and tearing approach as well as inner iteration method is used to complement the classic WTM model. In addition, the ABC algorithm is also introduced to find out the optimal decoupling schemes. In this paper, firstly, tearing approach and inner iteration method are analyzed for solving coupled sets. Secondly, a hybrid iteration model combining these two technologies is set up. Thirdly, a high-performance swarm intelligence algorithm, artificial bee colony, is adopted to realize problem-solving. Finally, an engineering design of a chemical processing system is given in order to verify its reasonability and effectiveness.

Design and Testing of Flight Control Laws on the RASCAL Research Helicopter

NASA Technical Reports Server (NTRS)

Frost, Chad R.; Hindson, William S.; Moralez. Ernesto, III; Tucker, George E.; Dryfoos, James B.

2001-01-01

Two unique sets of flight control laws were designed, tested and flown on the Army/NASA Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL) JUH-60A Black Hawk helicopter. The first set of control laws used a simple rate feedback scheme, intended to facilitate the first flight and subsequent flight qualification of the RASCAL research flight control system. The second set of control laws comprised a more sophisticated model-following architecture. Both sets of flight control laws were developed and tested extensively using desktop-to-flight modeling, analysis, and simulation tools. Flight test data matched the model predicted responses well, providing both evidence and confidence that future flight control development for RASCAL will be efficient and accurate.

Correlation consistent basis sets for the atoms In–Xe

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahler, Andrew; Wilson, Angela K., E-mail: akwilson@unt.edu

In this work, the correlation consistent family of Gaussian basis sets has been expanded to include all-electron basis sets for In–Xe. The methodology for developing these basis sets is described, and several examples of the performance and utility of the new sets have been provided. Dissociation energies and bond lengths for both homonuclear and heteronuclear diatomics demonstrate the systematic convergence behavior with respect to increasing basis set quality expected by the family of correlation consistent basis sets in describing molecular properties. Comparison with recently developed correlation consistent sets designed for use with the Douglas-Kroll Hamiltonian is provided.

Instructor's Guide for Fluid Mechanics: A Modular Approach.

ERIC Educational Resources Information Center

Cox, John S.

This guide is designed to assist engineering teachers in developing an understanding of fluid mechanics in their students. The course is designed around a set of nine self-paced learning modules, each of which contains a discussion of the subject matter; incremental objectives; problem index, set and answers; resource materials; and a quiz with…

Airspace Concept Evaluation System (ACES), Concept Simulations using Communication, Navigation and Surveillance (CNS) System Models

NASA Technical Reports Server (NTRS)

Kubat, Greg; Vandrei, Don

2006-01-01

Project Objectives include: a) CNS Model Development; b Design/Integration of baseline set of CNS Models into ACES; c) Implement Enhanced Simulation Capabilities in ACES; d) Design and Integration of Enhanced (2nd set) CNS Models; and e) Continue with CNS Model Integration/Concept evaluations.

The Roles and Uses of Design Principles for Developing the Trialogical Approach on Learning

ERIC Educational Resources Information Center

Paavola, Sami; Lakkala, Minna; Muukkonen, Hanni; Kosonen, Kari; Karlgren, Klas

2011-01-01

In the present paper, the development and use of a specific set of pedagogical design principles in a large research and development project are analysed. The project (the Knowledge Practices Laboratory) developed technology and a pedagogical approach to support certain kinds of collaborative knowledge creation practices related to the…

Designing and Evaluating a Professional Development Programme for Basic Technology Integration in English as a Foreign Language (EFL) Classrooms

ERIC Educational Resources Information Center

Ansyari, Muhammad Fauzan

2015-01-01

This study aims to develop and evaluate a professional development programme for technology integration in an Indonesian university's English language teaching setting. The study explored the characteristics of this programme to English lecturers' technological pedagogical content knowledge (TPCK) development. This design-based research employed…

Design, development, and clinical validation of therapeutic toys for autistic children

PubMed Central

Tseng, Kevin C.; Tseng, Sung-Hui; Cheng, Hsin-Yi Kathy

2016-01-01

[Purpose] One of the characteristics of autistic children is social interaction difficulties. Although therapeutic toys can promote social interaction, however its related research remains insufficient. The aim of the present study was to build a set of cooperative play toys that are suitable for autistic children. [Subjects and Methods] This study used an innovative product design and development approach as the basis for the creation of cooperative play toys. [Results] The present study has successfully developed cooperative play toys. Compared to the traditional game therapy for autism, cooperative play toy therapy can significantly improve the interactions between autistic children and their peers. [Conclusion] The most critical design theme of cooperative play toys focuses on captivating the interest of autistic children. Based on the needs of the individual cases, the design of the therapeutic toy set was specifically tailored, i.e., by reinforcing the sound and light effects to improve the attractiveness of the toys. In the future, different play modes can be combined with this toy set to further enhance the degree of interaction of autistic children and improve their quality of life and social skills. PMID:27512246

Design, development, and clinical validation of therapeutic toys for autistic children.

PubMed

Tseng, Kevin C; Tseng, Sung-Hui; Cheng, Hsin-Yi Kathy

2016-07-01

[Purpose] One of the characteristics of autistic children is social interaction difficulties. Although therapeutic toys can promote social interaction, however its related research remains insufficient. The aim of the present study was to build a set of cooperative play toys that are suitable for autistic children. [Subjects and Methods] This study used an innovative product design and development approach as the basis for the creation of cooperative play toys. [Results] The present study has successfully developed cooperative play toys. Compared to the traditional game therapy for autism, cooperative play toy therapy can significantly improve the interactions between autistic children and their peers. [Conclusion] The most critical design theme of cooperative play toys focuses on captivating the interest of autistic children. Based on the needs of the individual cases, the design of the therapeutic toy set was specifically tailored, i.e., by reinforcing the sound and light effects to improve the attractiveness of the toys. In the future, different play modes can be combined with this toy set to further enhance the degree of interaction of autistic children and improve their quality of life and social skills.

Distributed Group Design Process: Lessons Learned.

ERIC Educational Resources Information Center

Eseryel, Deniz; Ganesan, Radha

A typical Web-based training development team consists of a project manager, an instructional designer, a subject-matter expert, a graphic artist, and a Web programmer. The typical scenario involves team members working together in the same setting during the entire design and development process. What happens when the team is distributed, that is…

Designing Online Conferences to Promote Professional Development in Africa

ERIC Educational Resources Information Center

Carr, Tony

2016-01-01

This article considers how online conferences can support professional development across Africa and reviews elements of the literatures of social learning, online professional development and online conferences. The e/merge online conference is then described in terms of design features and participation metrics. This sets context for discussion…

Evaluation of a Mediated Program for Training Teachers of Exceptional Children in Instructional Development. Final Report 51.2.

ERIC Educational Resources Information Center

Thiagarajan, Sivasailam; Stolovitch, Harold D.

The document describes a project to design, develop, and evaluate a set of audiovisual training modules to augment a sourcebook for special education teacher trainees and to assist trainers and curriculum developers in the design of teacher training materials. It is explained in Chapter I that the project involved the 4-D Model--Define, Design,…

Genetic algorithms for GNC settings and DACS design application to an asteroid Kinetic Impactor

NASA Astrophysics Data System (ADS)

Vernis, P.; Oliviero, V.

2018-06-01

This paper deals with an application of Genetic Algorithm (GA) tools in order to perform and optimize the settings phase of the Guidance, Navigation, and Control (GNC) data set for the endgame phase of a Kinetic Impactor (KI) targeting a medium-size Near Earth Object (NEO). A coupled optimization of the GNC settings and of the GC-oriented design of the Divert and Attitude Control System (DACS) is also proposed. The illustration of the developed principles is made considering the NEOShield study frame.

Guidelines for Energy-Efficient Sustainable Schools.

ERIC Educational Resources Information Center

Nicklas, Michael; Bailey, Gary; Rosemain, Pascale; Olin, Samuel

These guidelines present optional strategies to be considered in designing schools to be more energy efficient and sustainable. The guidelines are organized by the following design and construction process: site selection; selection of A & E design team; programming and goal setting; schematic design; design development; construction…

Interaction of impeller and guide vane in a series-designed axial-flow pump

NASA Astrophysics Data System (ADS)

Kim, S.; Choi, Y. S.; Lee, K. Y.; Kim, J. H.

2012-11-01

In this paper, the interaction of the impeller and guide vane in a series-designed axial-flow pump was examined through the implementation of a commercial CFD code. The impeller series design refers to the general design procedure of the base impeller shape which must satisfy the various flow rate and head requirements by changing the impeller setting angle and number of blades of the base impeller. An arc type meridional shape was used to keep the meridional shape of the hub and shroud with various impeller setting angles. The blade angle and the thickness distribution of the impeller were designed as an NACA airfoil type. In the design of the guide vane, it was necessary to consider the outlet flow condition of the impeller with the given setting angle. The meridional shape of the guide vane were designed taking into consideration the setting angle of the impeller, and the blade angle distribution of the guide vane was determined with a traditional design method using vane plane development. In order to achieve the optimum impeller design and guide vane, three-dimensional computational fluid dynamics and the DOE method were applied. The interaction between the impeller and guide vane with different combination set of impeller setting angles and number of impeller blades was addressed by analyzing the flow field of the computational results.

Human Factors Analysis and Layout Guideline Development for the Canadian Surface Combatant (CSC) Project

DTIC Science & Technology

2013-04-01

project was to provide the Royal Canadian Navy ( RCN ) with a set of guidelines on analysis, design, and verification processes for effective room...design, and verification processes that should be used in the development of effective room layouts for Royal Canadian Navy ( RCN ) ships. The primary...designed CSC; however, the guidelines could be applied to the design of any multiple-operator space in any RCN vessel. Results: The development of

E-Learning: Students Input for Using Mobile Devices in Science Instructional Settings

ERIC Educational Resources Information Center

Yilmaz, Ozkan

2016-01-01

A variety of e-learning theories, models, and strategy have been developed to support educational settings. There are many factors for designing good instructional settings. This study set out to determine functionality of mobile devices, students who already have, and the student needs and views in relation to e-learning settings. The study…

Mars Science Laboratory Workstation Test Set

NASA Technical Reports Server (NTRS)

Henriquez, David A.; Canham, Timothy K.; Chang, Johnny T.; Villaume, Nathaniel

2009-01-01

The Mars Science Laboratory developed the Workstation TestSet (WSTS) is a computer program that enables flight software development on virtual MSL avionics. The WSTS is the non-real-time flight avionics simulator that is designed to be completely software-based and run on a workstation class Linux PC.

Between Two Advisors: Interconnecting Academic and Workplace Settings in an Emerging Field

ERIC Educational Resources Information Center

Hytönen, Kaisa; Palonen, Tuire; Lehtinen, Erno; Hakkarainen, Kai

2016-01-01

This article examines a new training design for continuing professional development that aims to support the learning of the novel knowledge and skills needed in emerging professional fields by interconnecting academic and workplace settings. The training design is based on using two advisors, one from working life and the other from an academic…

76 FR 22084 - Notice of Submission for OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... examine the feasibility of a promising practices study of Upward Bound that uses a rigorous quasi-experimental design. The design and feasibility report will develop a set of design options for conducting a...

Aircraft family design using enhanced collaborative optimization

NASA Astrophysics Data System (ADS)

Roth, Brian Douglas

Significant progress has been made toward the development of multidisciplinary design optimization (MDO) methods that are well-suited to practical large-scale design problems. However, opportunities exist for further progress. This thesis describes the development of enhanced collaborative optimization (ECO), a new decomposition-based MDO method. To support the development effort, the thesis offers a detailed comparison of two existing MDO methods: collaborative optimization (CO) and analytical target cascading (ATC). This aids in clarifying their function and capabilities, and it provides inspiration for the development of ECO. The ECO method offers several significant contributions. First, it enhances communication between disciplinary design teams while retaining the low-order coupling between them. Second, it provides disciplinary design teams with more authority over the design process. Third, it resolves several troubling computational inefficiencies that are associated with CO. As a result, ECO provides significant computational savings (relative to CO) for the test cases and practical design problems described in this thesis. New aircraft development projects seldom focus on a single set of mission requirements. Rather, a family of aircraft is designed, with each family member tailored to a different set of requirements. This thesis illustrates the application of decomposition-based MDO methods to aircraft family design. This represents a new application area, since MDO methods have traditionally been applied to multidisciplinary problems. ECO offers aircraft family design the same benefits that it affords to multidisciplinary design problems. Namely, it simplifies analysis integration, it provides a means to manage problem complexity, and it enables concurrent design of all family members. In support of aircraft family design, this thesis introduces a new wing structural model with sufficient fidelity to capture the tradeoffs associated with component commonality, but of appropriate fidelity for aircraft conceptual design. The thesis also introduces a new aircraft family concept. Unlike most families, the intent is not necessarily to produce all family members. Rather, the family includes members for immediate production and members that address potential future market conditions and/or environmental regulations. The result is a set of designs that yield a small performance penalty today in return for significant future flexibility to produce family members that respond to new market conditions and environmental regulations.

Modeling Tools for Propulsion Analysis and Computational Fluid Dynamics on the Internet

NASA Technical Reports Server (NTRS)

Muss, J. A.; Johnson, C. W.; Gotchy, M. B.

2000-01-01

The existing RocketWeb(TradeMark) Internet Analysis System (httr)://www.iohnsonrockets.com/rocketweb) provides an integrated set of advanced analysis tools that can be securely accessed over the Internet. Since these tools consist of both batch and interactive analysis codes, the system includes convenient methods for creating input files and evaluating the resulting data. The RocketWeb(TradeMark) system also contains many features that permit data sharing which, when further developed, will facilitate real-time, geographically diverse, collaborative engineering within a designated work group. Adding work group management functionality while simultaneously extending and integrating the system's set of design and analysis tools will create a system providing rigorous, controlled design development, reducing design cycle time and cost.

What makes a sustainability tool valuable, practical and useful in real-world healthcare practice? A mixed-methods study on the development of the Long Term Success Tool in Northwest London.

PubMed

Lennox, Laura; Doyle, Cathal; Reed, Julie E; Bell, Derek

2017-09-24

Although improvement initiatives show benefits to patient care, they often fail to sustain. Models and frameworks exist to address this challenge, but issues with design, clarity and usability have been barriers to use in healthcare settings. This work aimed to collaborate with stakeholders to develop a sustainability tool relevant to people in healthcare settings and practical for use in improvement initiatives. Tool development was conducted in six stages. A scoping literature review, group discussions and a stakeholder engagement event explored literature findings and their resonance with stakeholders in healthcare settings. Interviews, small-scale trialling and piloting explored the design and tested the practicality of the tool in improvement initiatives. National Institute for Health Research Collaboration for Leadership in Applied Health Research and Care for Northwest London (CLAHRC NWL). CLAHRC NWL improvement initiative teams and staff. The iterative design process and engagement of stakeholders informed the articulation of the sustainability factors identified from the literature and guided tool design for practical application. Key iterations of factors and tool design are discussed. From the development process, the Long Term Success Tool (LTST) has been designed. The Tool supports those implementing improvements to reflect on 12 sustainability factors to identify risks to increase chances of achieving sustainability over time. The Tool is designed to provide a platform for improvement teams to share their own views on sustainability as well as learn about the different views held within their team to prompt discussion and actions. The development of the LTST has reinforced the importance of working with stakeholders to design strategies which respond to their needs and preferences and can practically be implemented in real-world settings. Further research is required to study the use and effectiveness of the tool in practice and assess engagement with the method over time. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Development of Secondary Route Bridge Design Plan Guides

DOT National Transportation Integrated Search

2018-03-03

The objective of this study is to develop a set of bridge plan guides for low-volume traffic roads. The purpose of the plans is to facilitate construction of new structures suitable for local agencies. The designs are to specifically address common l...

Layered approach to workstation design for medical image viewing

NASA Astrophysics Data System (ADS)

Haynor, David R.; Zick, Gregory L.; Heritage, Marcus B.; Kim, Yongmin

1992-07-01

Software engineering principles suggest that complex software systems are best constructed from independent, self-contained modules, thereby maximizing the portability, maintainability and modifiability of the produced code. This principal is important in the design of medical imaging workstations, where further developments in technology (CPU, memory, interface devices, displays, network connections) are required for clinically acceptable workstations, and it is desirable to provide different hardware platforms with the ''same look and feel'' for the user. In addition, the set of desired functions is relatively well understood, but the optimal user interface for delivering these functions on a clinically acceptable workstation is still different depending on department, specialty, or individual preference. At the University of Washington, we are developing a viewing station based on the IBM RISC/6000 computer and on new technologies that are just becoming commercially available. These include advanced voice recognition systems and an ultra-high-speed network. We are developing a set of specifications and a conceptual design for the workstation, and will be producing a prototype. This paper presents our current concepts concerning the architecture and software system design of the future prototype. Our conceptual design specifies requirements for a Database Application Programming Interface (DBAPI) and for a User API (UAPI). The DBAPI consists of a set of subroutine calls that define the admissible transactions between the workstation and an image archive. The UAPI describes the requests a user interface program can make of the workstation. It incorporates basic display and image processing functions, yet is specifically designed to allow extensions to the basic set at the application level. We will discuss the fundamental elements of the two API''s and illustrate their application to workstation design.

Comparing Technology-Related Teacher Professional Development Designs: A Multilevel Study of Teacher and Student Impacts

ERIC Educational Resources Information Center

Walker, Andrew; Recker, Mimi; Ye, Lei; Robertshaw, M. Brooke; Sellers, Linda; Leary, Heather

2012-01-01

This article presents a quasi-experimental study comparing the impact of two technology-related teacher professional development (TTPD) designs, aimed at helping junior high school science and mathematics teachers design online activities using the rapidly growing set of online learning resources available on the Internet. The first TTPD design…

Designing primary health care teams for developing countries.

PubMed Central

Reisman, A; Duran, L

1983-01-01

A time-honored industrial engineering technique, job evaluation, which was developed to set rates for manual labor, was used in the design of new teams for delivering primary health care in Latin America. The technique was used both in writing job descriptions for new allied health personnel and in designing the curriculums needed to train the personnel. PMID:6856744

Using Hydrologic Data from Africa in a Senior-Level Course in Groundwater Hydrology (Invited)

NASA Astrophysics Data System (ADS)

Silliman, S. E.

2010-12-01

Ongoing research efforts in Benin, West Africa, and Uganda, East Africa, have provided substantial data sets involving groundwater quality, applied geophysics, water use, and response of local populations / government agencies to challenges related to water development, protection and management. Ranging from characterization of coastal salt-water encroachment to a major well field to nitrate and microbial contamination of rural water supplies, these data sets were developed by interdisciplinary / international teams that included both undergraduate and graduate students. The present discussion focuses on the integration of the resulting data sets into a senior-level (and lower-level graduate student) course in Groundwater Hydrology. The data sets are employed in multiple ways, including: (i) support of concepts introduced during lectures, (ii) problem sets involving analysis of the data, and (iii) foundation material for open-ended discussions on comparative water resource strategies in developed and developing countries. Most significant in terms of the use of these data sets to advance educational opportunities, the African case studies have been integrated into semester-long projects completed by teams of students as a significant component of their final grade as well as one of their engineering design experiences used to fulfill ABET requirements. During the 2009-2010 academic year, these data sets (as well as published data bases by other agencies) were used by individual groups to design water development strategies for rural villages. During the present semester, two teams of students are pursuing long-term sustainability analyses, the first focused on an aquifer system in northern Indiana (USA) and the second focused on a coastal aquifer system serving Cotonou, Benin. The goal of pursuing these parallel projects is to illustrate to the students the similarities and differences involved in water resource management / protection in different parts of the world (including technical as well as local political and cultural considerations). Advantages derived from using these data sets as part of this design course include: (i) increased interest in the course content, (ii) greater dedication to the course projects, (iii) discussions of development strategies for both developed and developing locations, and (iv) student interest in opportunities to apply their new-found hydrologic skills in both U.S. and international settings.

Designing a Standard Model for Development and Execution of an Analysis Project Plan

DTIC Science & Technology

2012-06-01

mitigations set forth are agreeable to all parties involved. 1.3 Document Risks, Issues, and Constraints 1.1 Gather Information 1.2 Develop...parent requirement into lower level objective, performance-based sibling actions. Collective accomplishment of the set of derived “ sibling ” actions

Towards a characterization of information automation systems on the flight deck

NASA Astrophysics Data System (ADS)

Dudley, Rachel Feddersen

This thesis summarizes research to investigate the characteristics that define information automation systems used on aircraft flight decks and the significant impacts that these characteristics have on pilot performance. Major accomplishments of the work include the development of a set of characteristics that describe information automation systems on the flight deck and an experiment designed to study a subset of these characteristics. Information automation systems on the flight deck are responsible for the collection, processing, analysis, and presentation of data to the flightcrew. These systems pose human factors issues and challenges that must be considered by designers of these systems. Based on a previously developed formal definition of information automation for aircraft flight deck systems, an analysis process was developed and conducted to reach a refined set of information automation characteristics. In this work, characteristics are defined as a set of properties or attributes that describe an information automation system's operation or behavior, which can be used to identify and assess potential human factors issues. Hypotheses were formed for a subset of the characteristics: Automation Visibility, Information Quality, and Display Complexity. An experimental investigation was developed to measure performance impacts related to these characteristics, which showed mixed results of expected and surprising findings, with many interactions. A set of recommendations were then developed based on the experimental observations. Ensuring that the right information is presented to pilots at the right time and in the appropriate manner is the job of flight deck system designers. This work provides a foundation for developing recommendations and guidelines specific to information automation on the flight deck with the goal of improving the design and evaluation of information automation systems before they are implemented.

Development of a deep convolutional neural network to predict grading of canine meningiomas from magnetic resonance images.

PubMed

Banzato, T; Cherubini, G B; Atzori, M; Zotti, A

2018-05-01

An established deep neural network (DNN) based on transfer learning and a newly designed DNN were tested to predict the grade of meningiomas from magnetic resonance (MR) images in dogs and to determine the accuracy of classification of using pre- and post-contrast T1-weighted (T1W), and T2-weighted (T2W) MR images. The images were randomly assigned to a training set, a validation set and a test set, comprising 60%, 10% and 30% of images, respectively. The combination of DNN and MR sequence displaying the highest discriminating accuracy was used to develop an image classifier to predict the grading of new cases. The algorithm based on transfer learning using the established DNN did not provide satisfactory results, whereas the newly designed DNN had high classification accuracy. On the basis of classification accuracy, an image classifier built on the newly designed DNN using post-contrast T1W images was developed. This image classifier correctly predicted the grading of 8 out of 10 images not included in the data set. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Design study of a low cost civil aviation GPS receiver system

NASA Technical Reports Server (NTRS)

Cnossen, R.; Gilbert, G. A.

1979-01-01

A low cost Navstar receiver system for civil aviation applications was defined. User objectives and constraints were established. Alternative navigation processing design trades were evaluated. Receiver hardware was synthesized by comparing technology projections with various candidate system designs. A control display unit design was recommended as the result of field test experience with Phase I GPS sets and a review of special human factors for general aviation users. Areas requiring technology development to ensure a low cost Navstar Set in the 1985 timeframe were identified.

NASA's RPS Design Reference Mission Set for Solar System Exploration

NASA Technical Reports Server (NTRS)

Balint, Tibor S.

2007-01-01

NASA's 2006 Solar System Exploration (SSE) Strategic Roadmap identified a set of proposed large Flagship, medium New Frontiers and small Discovery class missions, addressing key exploration objectives. These objectives respond to the recommendations by the National Research Council (NRC), reported in the SSE Decadal Survey. The SSE Roadmap is down-selected from an over-subscribed set of missions, called the SSE Design Reference Mission (DRM) set. Missions in the Flagship and New Frontiers classes can consider Radioisotope Power Systems (RPSs), while small Discovery class missions are not permitted to use them, due to cost constraints. In line with the SSE DRM set and the SSE Roadmap missions, the RPS DRM set represents a set of missions, which can be enabled or enhanced by RPS technologies. At present, NASA has proposed the development of two new types of RPSs. These are the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG), with static power conversion; and the Stirling Radioisotope Generator (SRG), with dynamic conversion. Advanced RPSs, under consideration for possible development, aim to increase specific power levels. In effect, this would either increase electric power generation for the same amount of fuel, or reduce fuel requirements for the same power output, compared to the proposed MMRTG or SRG. Operating environments could also influence the design, such that an RPS on the proposed Titan Explorer would use smaller fins to minimize heat rejection in the extreme cold environment; while the Venus Mobile Explorer long-lived in-situ mission would require the development of a new RPS, in order to tolerate the extreme hot environment, and to simultaneously provide active cooling to the payload and other electric components. This paper discusses NASA's SSE RPS DRM set, in line with the SSE DRM set. It gives a qualitative assessment regarding the impact of various RPS technology and configuration options on potential mission architectures, which could support NASA's RPS technology development planning, and provide an understanding of fuel need trades over the next three decades.

Development of an Ada package library

NASA Technical Reports Server (NTRS)

Burton, Bruce; Broido, Michael

1986-01-01

A usable prototype Ada package library was developed and is currently being evaluated for use in large software development efforts. The library system is comprised of an Ada-oriented design language used to facilitate the collection of reuse information, a relational data base to store reuse information, a set of reusable Ada components and tools, and a set of guidelines governing the system's use. The prototyping exercise is discussed and the lessons learned from it have led to the definition of a comprehensive tool set to facilitate software reuse.

Bid opening report : Federal-aid highway construction contracts : first six months 2001

DOT National Transportation Integrated Search

2000-04-01

This research update provides general human factors design information relevant to the early phases of in-vehicle icon development and design. It reflects a subset of the results to date of a Federal Highway Administration project to develop a set of...

Teaching Students with Severe Disabilities in Inclusive Settings.

ERIC Educational Resources Information Center

Demchak, MaryAnn

1997-01-01

This booklet is designed to provide strategies for teaching students with severe disabilities in inclusive settings. Chapters address initial student-specific steps in planning for effective inclusive education, including developing the Individualized Education Program (IEP), targeting IEP objectives in the general education setting, and planning…

Infinity: The Twilight Zone of Mathematics.

ERIC Educational Resources Information Center

Love, William P.

1989-01-01

The theorems and proofs presented are designed to enhance student understanding of the theory of infinity as developed by Cantor and others. Three transfinite numbers are defined to express the cardinality of infinite algebraic sets, infinite sets of geometric points and infinite sets of functions. (DC)

Modeling Design Iteration in Product Design and Development and Its Solution by a Novel Artificial Bee Colony Algorithm

PubMed Central

2014-01-01

Due to fierce market competition, how to improve product quality and reduce development cost determines the core competitiveness of enterprises. However, design iteration generally causes increases of product cost and delays of development time as well, so how to identify and model couplings among tasks in product design and development has become an important issue for enterprises to settle. In this paper, the shortcomings existing in WTM model are discussed and tearing approach as well as inner iteration method is used to complement the classic WTM model. In addition, the ABC algorithm is also introduced to find out the optimal decoupling schemes. In this paper, firstly, tearing approach and inner iteration method are analyzed for solving coupled sets. Secondly, a hybrid iteration model combining these two technologies is set up. Thirdly, a high-performance swarm intelligence algorithm, artificial bee colony, is adopted to realize problem-solving. Finally, an engineering design of a chemical processing system is given in order to verify its reasonability and effectiveness. PMID:25431584

An efficient, scalable, and adaptable framework for solving generic systems of level-set PDEs

PubMed Central

Mosaliganti, Kishore R.; Gelas, Arnaud; Megason, Sean G.

2013-01-01

In the last decade, level-set methods have been actively developed for applications in image registration, segmentation, tracking, and reconstruction. However, the development of a wide variety of level-set PDEs and their numerical discretization schemes, coupled with hybrid combinations of PDE terms, stopping criteria, and reinitialization strategies, has created a software logistics problem. In the absence of an integrative design, current toolkits support only specific types of level-set implementations which restrict future algorithm development since extensions require significant code duplication and effort. In the new NIH/NLM Insight Toolkit (ITK) v4 architecture, we implemented a level-set software design that is flexible to different numerical (continuous, discrete, and sparse) and grid representations (point, mesh, and image-based). Given that a generic PDE is a summation of different terms, we used a set of linked containers to which level-set terms can be added or deleted at any point in the evolution process. This container-based approach allows the user to explore and customize terms in the level-set equation at compile-time in a flexible manner. The framework is optimized so that repeated computations of common intensity functions (e.g., gradient and Hessians) across multiple terms is eliminated. The framework further enables the evolution of multiple level-sets for multi-object segmentation and processing of large datasets. For doing so, we restrict level-set domains to subsets of the image domain and use multithreading strategies to process groups of subdomains or level-set functions. Users can also select from a variety of reinitialization policies and stopping criteria. Finally, we developed a visualization framework that shows the evolution of a level-set in real-time to help guide algorithm development and parameter optimization. We demonstrate the power of our new framework using confocal microscopy images of cells in a developing zebrafish embryo. PMID:24501592

An efficient, scalable, and adaptable framework for solving generic systems of level-set PDEs.

PubMed

Mosaliganti, Kishore R; Gelas, Arnaud; Megason, Sean G

2013-01-01

In the last decade, level-set methods have been actively developed for applications in image registration, segmentation, tracking, and reconstruction. However, the development of a wide variety of level-set PDEs and their numerical discretization schemes, coupled with hybrid combinations of PDE terms, stopping criteria, and reinitialization strategies, has created a software logistics problem. In the absence of an integrative design, current toolkits support only specific types of level-set implementations which restrict future algorithm development since extensions require significant code duplication and effort. In the new NIH/NLM Insight Toolkit (ITK) v4 architecture, we implemented a level-set software design that is flexible to different numerical (continuous, discrete, and sparse) and grid representations (point, mesh, and image-based). Given that a generic PDE is a summation of different terms, we used a set of linked containers to which level-set terms can be added or deleted at any point in the evolution process. This container-based approach allows the user to explore and customize terms in the level-set equation at compile-time in a flexible manner. The framework is optimized so that repeated computations of common intensity functions (e.g., gradient and Hessians) across multiple terms is eliminated. The framework further enables the evolution of multiple level-sets for multi-object segmentation and processing of large datasets. For doing so, we restrict level-set domains to subsets of the image domain and use multithreading strategies to process groups of subdomains or level-set functions. Users can also select from a variety of reinitialization policies and stopping criteria. Finally, we developed a visualization framework that shows the evolution of a level-set in real-time to help guide algorithm development and parameter optimization. We demonstrate the power of our new framework using confocal microscopy images of cells in a developing zebrafish embryo.

How Differences in Interactions Affect Learning and Development of Design Expertise in the Context of Biomedical Engineering Design

ERIC Educational Resources Information Center

Svihla, Vanessa Lynn

2009-01-01

Authentic design commonly involves teams of designers collaborating on ill-structured problems over extended time periods. Nonetheless, design has been studied extensively in sequestered settings, limiting our understanding of design as process and especially of learning design process. This study addresses potential shortcomings of such studies…

CEM-designer: design of custom expression microarrays in the post-ENCODE Era.

PubMed

Arnold, Christian; Externbrink, Fabian; Hackermüller, Jörg; Reiche, Kristin

2014-11-10

Microarrays are widely used in gene expression studies, and custom expression microarrays are popular to monitor expression changes of a customer-defined set of genes. However, the complexity of transcriptomes uncovered recently make custom expression microarray design a non-trivial task. Pervasive transcription and alternative processing of transcripts generate a wealth of interweaved transcripts that requires well-considered probe design strategies and is largely neglected in existing approaches. We developed the web server CEM-Designer that facilitates microarray platform independent design of custom expression microarrays for complex transcriptomes. CEM-Designer covers (i) the collection and generation of a set of unique target sequences from different sources and (ii) the selection of a set of sensitive and specific probes that optimally represents the target sequences. Probe design itself is left to third party software to ensure that probes meet provider-specific constraints. CEM-Designer is available at http://designpipeline.bioinf.uni-leipzig.de. Copyright © 2014 Elsevier B.V. All rights reserved.

Parallel digital forensics infrastructure.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liebrock, Lorie M.; Duggan, David Patrick

2009-10-01

This report documents the architecture and implementation of a Parallel Digital Forensics infrastructure. This infrastructure is necessary for supporting the design, implementation, and testing of new classes of parallel digital forensics tools. Digital Forensics has become extremely difficult with data sets of one terabyte and larger. The only way to overcome the processing time of these large sets is to identify and develop new parallel algorithms for performing the analysis. To support algorithm research, a flexible base infrastructure is required. A candidate architecture for this base infrastructure was designed, instantiated, and tested by this project, in collaboration with New Mexicomore » Tech. Previous infrastructures were not designed and built specifically for the development and testing of parallel algorithms. With the size of forensics data sets only expected to increase significantly, this type of infrastructure support is necessary for continued research in parallel digital forensics. This report documents the implementation of the parallel digital forensics (PDF) infrastructure architecture and implementation.« less

A Pilot Project to Develop and Assess a Health Education Programme for Type 2 Diabetes Mellitus Patients

ERIC Educational Resources Information Center

Atak, Nazli; Arslan, Umit

2005-01-01

Objective: The current research was designed to develop a health education programme for type 2 diabetes mellitus based on the Taba-Tyler model and to evaluate its effect. Design: The study was quasi-experimental in design. Setting: Fifty-five patients from the Endocrinology and Metabolism Unit, University Hospital of Ankara. Method: An education…

Teacher Design Teams as a Strategy for Professional Development: The Role of the Facilitator

ERIC Educational Resources Information Center

Becuwe, Heleen; Tondeur, Jo; Pareja Roblin, Natalie; Thys, Jeroen; Castelein, Els

2016-01-01

The goal of the current study was to explore the role and importance of the facilitator in teacher design teams. The study took place in the context of a pre-service teacher education institution in Belgium, where teacher design teams were set up to facilitate the professional development of teacher educators. The findings from focus-group…

Rotorcraft Conceptual Design Environment

DTIC Science & Technology

2009-10-01

systems engineering design tool sets. The DaVinci Project vision is to develop software architecture and tools specifically for acquisition system...enable movement of that information to and from analyses. Finally, a recently developed rotorcraft system analysis tool is described. Introduction...information to and from analyses. Finally, a recently developed rotorcraft system analysis tool is described. 15. SUBJECT TERMS 16. SECURITY CLASSIFICATION

Development of an Improvised Manual Airbrush Compressor for Students Artist in Nigeria

ERIC Educational Resources Information Center

Kwasu, Isaac Ali

2015-01-01

The study was set to develop and pilot a manual airbrush compressor for artists use in art and design. In the design of the manual airbrush, three established technological systems were adopted which includes, compressor, pressure tank and bicycle operating system. The idea was skillfully translated into a working drawing and developed into a…

SDTM - SYSTEM DESIGN TRADEOFF MODEL FOR SPACE STATION FREEDOM RELEASE 1.1

NASA Technical Reports Server (NTRS)

Chamberlin, R. G.

1994-01-01

Although extensive knowledge of space station design exists, the information is widely dispersed. The Space Station Freedom Program (SSFP) needs policies and procedures that ensure the use of consistent design objectives throughout its organizational hierarchy. The System Design Tradeoff Model (SDTM) produces information that can be used for this purpose. SDTM is a mathematical model of a set of possible designs for Space Station Freedom. Using the SDTM program, one can find the particular design which provides specified amounts of resources to Freedom's users at the lowest total (or life cycle) cost. One can also compare alternative design concepts by changing the set of possible designs, while holding the specified user services constant, and then comparing costs. Finally, both costs and user services can be varied simultaneously when comparing different designs. SDTM selects its solution from a set of feasible designs. Feasibility constraints include safety considerations, minimum levels of resources required for station users, budget allocation requirements, time limitations, and Congressional mandates. The total, or life cycle, cost includes all of the U.S. costs of the station: design and development, purchase of hardware and software, assembly, and operations throughout its lifetime. The SDTM development team has identified, for a variety of possible space station designs, the subsystems that produce the resources to be modeled. The team has also developed formulas for the cross consumption of resources by other resources, as functions of the amounts of resources produced. SDTM can find the values of station resources, so that subsystem designers can choose new design concepts that further reduce the station's life cycle cost. The fundamental input to SDTM is a set of formulas that describe the subsystems which make up a reference design. Most of the formulas identify how the resources required by each subsystem depend upon the size of the subsystem. Some of the formulas describe how the subsystem costs depend on size. The formulas can be complicated and nonlinear (if nonlinearity is needed to describe how designs change with size). SDTM's outputs are amounts of resources, life-cycle costs, and marginal costs. SDTM will run on IBM PC/XTs, ATs, and 100% compatibles with 640K of RAM and at least 3Mb of fixed-disk storage. A printer which can print in 132-column mode is also required, and a mathematics co-processor chip is highly recommended. This code is written in Turbo C 2.0. However, since the developers used a modified version of the proprietary Vitamin C source code library, the complete source code is not available. The executable is provided, along with all non-proprietary source code. This program was developed in 1989.

The development of environmental assessment tools to support the creation of dementia friendly care environments: Innovative practice.

PubMed

Waller, Sarah; Masterson, Abigail; Evans, Simon C

2017-02-01

The need for more dementia friendly design in hospitals and other care settings is now widely acknowledged. Working with 26 NHS Trusts in England as part of a Department of Health commissioned programme, The King's Fund developed a set of overarching design principles and an environmental assessment tool for hospital wards in 2012. Following requests from other sectors, additional tools were developed for hospitals, care homes, health centres and housing with care. The tools have proven to be effective in both disseminating the principles of dementia friendly design and in enabling the case to be made for improvements that have a positive effect on patient outcomes and staff morale. This paper reports on the development, use and review of the environmental assessment tools, including further work that is now being taken forward by The Association for Dementia Studies, University of Worcester.

Through the eyes of professional developers: Understanding the design of learning experiences for science teachers

NASA Astrophysics Data System (ADS)

Higgins, Tara Eileen

Professional development is important for improving teacher practice and student learning, particularly in inquiry-oriented and technology-enhanced science instruction. This study examines professional developers' practices and their impact on teachers' classroom instruction and student achievement. It analyzes professional developers designing and implementing a five-year professional development program designed to support middle school science teachers. The professional developers are four university-based researchers who worked with sixteen science teachers over three years, setting program goals, facilitating workshops, providing in-classroom support for teachers, and continually refining the program. The analysis is guided by the knowledge integration perspective, a sociocognitive framework for understanding how teachers and professional developers integrate their ideas about teaching and learning. The study investigates the professional developers' goals and teachers' interpretations of those goals. It documents how professional developers plan teacher learning experiences and explores the connection between professional development activities and teachers' classroom practice. Results are based on two rounds of interviews with professional developers, audio recordings of professional developers' planning meetings and videotaped professional development activities. Data include classroom observations, teacher interviews, teacher reflections during professional development activities, and results from student assessments. The study shows the benefit of a professional development approach that relies on an integrated cycle of setting goals, understanding teachers' interpretations, and refining implementation. The professional developers based their design on making inquiry and technology accessible, situating professional development in teachers' work, supporting collaboration, and sustaining learning. The findings reflect alignment of the design goals with the perspective guiding the curriculum design, and consider multiple goals for student and teacher learning. The study has implications for professional development design, particularly in supporting inquiry-oriented science and technology-enhanced instruction. Effective professional developers formulate coherent conceptions of program goals, use evidence of teacher outcomes to refine their goals and practices, and connect student and teacher learning. This study illustrates the value of research on the individuals who design and lead professional development programs.

Steps to Leadership Action Learning Sets: "Make It Challenging but Not Too Challenging"

ERIC Educational Resources Information Center

Hughes, Derek

2010-01-01

This paper reviews how action learning was used as part of a regional leadership development programme involving a number of public sector organisations. It explores how the sets were designed and set up and the significant challenges that this particular approach brought. A number of positive tangible outcomes were produced from the sets and…

Rapid Sampling of Hydrogen Bond Networks for Computational Protein Design.

PubMed

Maguire, Jack B; Boyken, Scott E; Baker, David; Kuhlman, Brian

2018-05-08

Hydrogen bond networks play a critical role in determining the stability and specificity of biomolecular complexes, and the ability to design such networks is important for engineering novel structures, interactions, and enzymes. One key feature of hydrogen bond networks that makes them difficult to rationally engineer is that they are highly cooperative and are not energetically favorable until the hydrogen bonding potential has been satisfied for all buried polar groups in the network. Existing computational methods for protein design are ill-equipped for creating these highly cooperative networks because they rely on energy functions and sampling strategies that are focused on pairwise interactions. To enable the design of complex hydrogen bond networks, we have developed a new sampling protocol in the molecular modeling program Rosetta that explicitly searches for sets of amino acid mutations that can form self-contained hydrogen bond networks. For a given set of designable residues, the protocol often identifies many alternative sets of mutations/networks, and we show that it can readily be applied to large sets of residues at protein-protein interfaces or in the interior of proteins. The protocol builds on a recently developed method in Rosetta for designing hydrogen bond networks that has been experimentally validated for small symmetric systems but was not extensible to many larger protein structures and complexes. The sampling protocol we describe here not only recapitulates previously validated designs with performance improvements but also yields viable hydrogen bond networks for cases where the previous method fails, such as the design of large, asymmetric interfaces relevant to engineering protein-based therapeutics.

Approaches to Developing Health in Early Years Settings

ERIC Educational Resources Information Center

Mooney, Ann; Boddy, Janet; Statham, June; Warwick, Ian

2008-01-01

Purpose: The purpose of the paper is to consider the opportunities and difficulties in developing health-promotion work in early years settings in the UK. Design/methodology/approach: As the first study of its kind conducted in the UK, a multi-method approach was adopted involving: an overview of health-related guidance and of effective…

Guidelines for Developing Spacecraft Structural Requirements: A Thermal and Environmental Perspective

NASA Technical Reports Server (NTRS)

Holladay, Jon; Day, Greg; Gill, Larry

2004-01-01

Spacecraft are typically designed with a primary focus on weight in order to meet launch vehicle performance parameters. However, for pressurized and/or man-rated spacecraft, it is also necessary to have an understanding of the vehicle operating environments to properly size the pressure vessel. Proper sizing of the pressure vessel requires an understanding of the space vehicle's life cycle and compares the physical design optimization (weight and launch "cost") to downstream operational complexity and total life cycle cost. This paper will provide an overview of some major environmental design drivers and provide examples for calculating the optimal design pressure versus a selected set of design parameters related to thermal and environmental perspectives. In addition, this paper will provide a generic set of cracking pressures for both positive and negative pressure relief valves that encompasses worst case environmental effects for a variety of launch / landing sites. Finally, several examples are included to highlight pressure relief set points and vehicle weight impacts for a selected set of orbital missions.

Infusing Technology Driven Design Thinking in Industrial Design Education: A Case Study

ERIC Educational Resources Information Center

Mubin, Omar; Novoa, Mauricio; Al Mahmud, Abdullah

2017-01-01

Purpose: This paper narrates a case study on design thinking-based education work in an industrial design honours program. Student projects were developed in a multi-disciplinary setting across a Computing and Engineering faculty that allowed promoting technologically and user-driven innovation strategies. Design/methodology/approach: A renewed…

Engineering design skills coverage in K-12 engineering program curriculum materials in the USA

NASA Astrophysics Data System (ADS)

Chabalengula, Vivien M.; Mumba, Frackson

2017-11-01

The current K-12 Science Education framework and Next Generation Science Standards (NGSS) in the United States emphasise the integration of engineering design in science instruction to promote scientific literacy and engineering design skills among students. As such, many engineering education programmes have developed curriculum materials that are being used in K-12 settings. However, little is known about the nature and extent to which engineering design skills outlined in NGSS are addressed in these K-12 engineering education programme curriculum materials. We analysed nine K-12 engineering education programmes for the nature and extent of engineering design skills coverage. Results show that developing possible solutions and actual designing of prototypes were the highly covered engineering design skills; specification of clear goals, criteria, and constraints received medium coverage; defining and identifying an engineering problem; optimising the design solution; and demonstrating how a prototype works, and making iterations to improve designs were lowly covered. These trends were similar across grade levels and across discipline-specific curriculum materials. These results have implications on engineering design-integrated science teaching and learning in K-12 settings.

User-Centered Design of Learn to Quit, a Smoking Cessation Smartphone App for People With Serious Mental Illness

PubMed Central

Rizo, Javier; Zeng, Emily; Kientz, Julie A; Ries, Richard; Otis, Chad; Hernandez, Kayla

2018-01-01

Background Smoking rates in the United States have been reduced in the past decades to 15% of the general population. However, up to 88% of people with psychiatric symptoms still smoke, leading to high rates of disease and mortality. Therefore, there is a great need to develop smoking cessation interventions that have adequate levels of usability and can reach this population. Objective The objective of this study was to report the rationale, ideation, design, user research, and final specifications of a novel smoking cessation app for people with serious mental illness (SMI) that will be tested in a feasibility trial. Methods We used a variety of user-centered design methods and materials to develop the tailored smoking cessation app. This included expert panel guidance, a set of design principles and theory-based smoking cessation content, development of personas and paper prototyping, usability testing of the app prototype, establishment of app’s core vision and design specification, and collaboration with a software development company. Results We developed Learn to Quit, a smoking cessation app designed and tailored to individuals with SMI that incorporates the following: (1) evidence-based smoking cessation content from Acceptance and Commitment Therapy and US Clinical Practice Guidelines for smoking cessation aimed at providing skills for quitting while addressing mental health symptoms, (2) a set of behavioral principles to increase retention and comprehension of smoking cessation content, (3) a gamification component to encourage and sustain app engagement during a 14-day period, (4) an app structure and layout designed to minimize usability errors in people with SMI, and (5) a set of stories and visuals that communicate smoking cessation concepts and skills in simple terms. Conclusions Despite its increasing importance, the design and development of mHealth technology is typically underreported, hampering scientific innovation. This report describes the systematic development of the first smoking cessation app tailored to people with SMI, a population with very high rates of nicotine addiction, and offers new design strategies to engage this population. mHealth developers in smoking cessation and related fields could benefit from a design strategy that capitalizes on the role visual engagement, storytelling, and the systematic application of behavior analytic principles to deliver evidence-based content. PMID:29339346

A standard set of upper extremity tasks for evaluating rehabilitation interventions for individuals with complete arm paralysis

PubMed Central

Cornwell, Andrew S.; Liao, James Y.; Bryden, Anne M.; Kirsch, Robert F.

2013-01-01

We have developed a set of upper extremity functional tasks to guide the design and test the performance of rehabilitation technologies that restore arm motion in people with high tetraplegia. Our goal was to develop a short set of tasks that would be representative of a much larger set of activities of daily living while also being feasible for a unilateral user of an implanted Functional Electrical Stimulation (FES) system. To compile this list of tasks, we reviewed existing clinical outcome measures related to arm and hand function, and were further informed by surveys of patient desires. We ultimately selected a set of five tasks that captured the most common components of movement seen in these tasks, making them highly relevant for assessing FES-restored unilateral arm function in individuals with high cervical spinal cord injury (SCI). The tasks are intended to be used when setting design specifications and for evaluation and standardization of rehabilitation technologies under development. While not unique, this set of tasks will provide a common basis for comparing different interventions (e.g., FES, powered orthoses, robotic assistants) and testing different user command interfaces (e.g., sip-and-puff, head joysticks, brain-computer interfaces). PMID:22773199

The Development of Preschoolers' Living Kinds Concept: A Longitudinal Study

ERIC Educational Resources Information Center

Margett-Jordan, Tessa; Falcon, Rachael G.; Witherington, David C.

2017-01-01

Given limitations in the integrative scope of past research, basic questions about the organization and development of preschoolers' living kinds concept remain open to debate. This study was designed to address past limitations through use of a longitudinal design, extensive stimulus set, and alternate indices of understanding. Thirty-five…

Moderate-resolution data and gradient nearest neighbor imputation for regional-national risk assessment

Treesearch

Kenneth B. Jr. Pierce; C. Kenneth Brewer; Janet L. Ohmann

2010-01-01

This study was designed to test the feasibility of combining a method designed to populate pixels with inventory plot data at the 30-m scale with a new national predictor data set. The new national predictor data set was developed by the USDA Forest Service Remote Sensing Applications Center (hereafter RSAC) at the 250-m scale. Gradient Nearest Neighbor (GNN)...

76 FR 338 - Notice of Proposed Information Collection Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-04

... feasibility of a promising practices study of Upward Bound that uses a rigorous quasi-experimental design. The design and feasibility report will develop a set of design options for conducting a study of Upward Bound and examine their applicability to studies of other TRIO programs. If a rigorous evaluation design...

Paper Towers: Building Students' Understandings of Technological Design

ERIC Educational Resources Information Center

Minogue, James; Guentensberger, Todd

2006-01-01

One set of ideas at the core of the National Science Education Standards (NSES) Science and Technology Standards is that of engaging middle school students in activities that help them develop their understandings of technological design. More precisely, students should be able to identify appropriate problems for technological design, design a…

OARSI Clinical Trials Recommendations: Design and conduct of clinical trials of lifestyle diet and exercise interventions for osteoarthritis.

PubMed

Messier, S P; Callahan, L F; Golightly, Y M; Keefe, F J

2015-05-01

The objective was to develop a set of "best practices" for use as a primer for those interested in entering the clinical trials field for lifestyle diet and/or exercise interventions in osteoarthritis (OA), and as a set of recommendations for experienced clinical trials investigators. A subcommittee of the non-pharmacologic therapies committee of the OARSI Clinical Trials Working Group was selected by the Steering Committee to develop a set of recommended principles for non-pharmacologic diet/exercise OA randomized clinical trials. Topics were identified for inclusion by co-authors and reviewed by the subcommittee. Resources included authors' expert opinions, traditional search methods including MEDLINE (via PubMed), and previously published guidelines. Suggested steps and considerations for study methods (e.g., recruitment and enrollment of participants, study design, intervention and assessment methods) were recommended. The recommendations set forth in this paper provide a guide from which a research group can design a lifestyle diet/exercise randomized clinical trial in patients with OA. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Developing Learning Analytics Design Knowledge in the "Middle Space": The Student Tuning Model and Align Design Framework for Learning Analytics Use

ERIC Educational Resources Information Center

Wise, Alyssa Friend; Vytasek, Jovita Maria; Hausknecht, Simone; Zhao, Yuting

2016-01-01

This paper addresses a relatively unexplored area in the field of learning analytics: how analytics are taken up and used as part of teaching and learning processes. Initial steps are taken towards developing design knowledge for this "middle space," with a focus on students as analytics users. First, a core set of challenges for…

A guided search genetic algorithm using mined rules for optimal affective product design

NASA Astrophysics Data System (ADS)

Fung, Chris K. Y.; Kwong, C. K.; Chan, Kit Yan; Jiang, H.

2014-08-01

Affective design is an important aspect of new product development, especially for consumer products, to achieve a competitive edge in the marketplace. It can help companies to develop new products that can better satisfy the emotional needs of customers. However, product designers usually encounter difficulties in determining the optimal settings of the design attributes for affective design. In this article, a novel guided search genetic algorithm (GA) approach is proposed to determine the optimal design attribute settings for affective design. The optimization model formulated based on the proposed approach applied constraints and guided search operators, which were formulated based on mined rules, to guide the GA search and to achieve desirable solutions. A case study on the affective design of mobile phones was conducted to illustrate the proposed approach and validate its effectiveness. Validation tests were conducted, and the results show that the guided search GA approach outperforms the GA approach without the guided search strategy in terms of GA convergence and computational time. In addition, the guided search optimization model is capable of improving GA to generate good solutions for affective design.

Bringing Planetary Data into Learning Environments: A Community Effort

NASA Astrophysics Data System (ADS)

Shipp, S.; Higbie, M.; Lowes, L.

2005-12-01

Recognizing the need to communicate scientific findings, and the power of using real planetary data in educational settings to engage students in Earth and space science in meaningful ways, the South Central Organization of Researchers and Educators and the Solar System Exploration Education Forum, part of NASA's Science Mission Directorate's Support Network, have established the Planetary Data in Education (PDE) Initiative. The Initiative strives to: 1) Establish a collaborative community of educators, education specialists, curriculum developers, tool developers, learning technologists, scientists, and data providers to design and develop educationally appropriate products; 2) Build awareness in the broader educational and scientific community of existing programs, products, and resources; 3) Address issues hindering the effective use of planetary data in formal and informal educational settings; and 4) Encourage partnerships that leverage the community's expertise The PDE community has hosted two conferences exploring issues in using data in educational settings. The community recognizes that data are available through venues such as the Planetary Data Systems (PDS), but not in a format that the end-user in a formal or informal educational setting can digest; these data are intended for the scientific audience. Development of meaningful educational programs using planetary data requires design of appropriate learner interfaces and involvement of data providers, product developers, learning technologists, scientists, and educators. The PDE community will participate in the development of Earth Exploration Toolbooks during the DLESE Data Services Workshop and will host a workshop in the summer of 2006 to bring together small groups of educators, data providers, and learning technologists, and scientists to design and develop products that bring planetary data into educational settings. In addition, the PDE community hosts a Web site that presents elements identified as needed by the community, including examples of planetary data use in education, recommendations for program development, links to data providers, opportunities for collaboration, pertinent research, and a Web portal to access educational resources using planetary data on the DLESE Web site.

Orchestrating Professional Development for Baby Room Practitioners: Raising the Stakes in New Dialogic Encounters

ERIC Educational Resources Information Center

Goouch, Kathleen; Powell, Sacha

2013-01-01

This article has emerged from a research and development project, The Baby Room, which was designed to examine how babies are cared for in daycare settings. Within the project, a form of professional development was created which designated a central space for dialogic encounter, primarily to enable the baby room practitioners who participated in…

Maximum Likelihood Estimation of Spectra Information from Multiple Independent Astrophysics Data Sets

NASA Technical Reports Server (NTRS)

Howell, Leonard W., Jr.; Six, N. Frank (Technical Monitor)

2002-01-01

The Maximum Likelihood (ML) statistical theory required to estimate spectra information from an arbitrary number of astrophysics data sets produced by vastly different science instruments is developed in this paper. This theory and its successful implementation will facilitate the interpretation of spectral information from multiple astrophysics missions and thereby permit the derivation of superior spectral information based on the combination of data sets. The procedure is of significant value to both existing data sets and those to be produced by future astrophysics missions consisting of two or more detectors by allowing instrument developers to optimize each detector's design parameters through simulation studies in order to design and build complementary detectors that will maximize the precision with which the science objectives may be obtained. The benefits of this ML theory and its application is measured in terms of the reduction of the statistical errors (standard deviations) of the spectra information using the multiple data sets in concert as compared to the statistical errors of the spectra information when the data sets are considered separately, as well as any biases resulting from poor statistics in one or more of the individual data sets that might be reduced when the data sets are combined.

Design and content validation of a set of SMS to promote seeking of specialized mental health care within the Allillanchu Project.

PubMed

Toyama, M; Diez-Canseco, F; Busse, P; Del Mastro, I; Miranda, J J

2018-01-01

The aim of this study was to design and develop a set of, short message service (SMS) to promote specialized mental health care seeking within the framework of the Allillanchu Project. The design phase consisted of 39 interviews with potential recipients of the SMS, about use of cellphones, and perceptions and motivations towards seeking mental health care. After the data collection, the research team developed a set of seven SMS for validation. The content validation phase consisted of 24 interviews. The participants answered questions regarding their understanding of the SMS contents and rated its appeal. The seven SMS subjected to content validation were tailored to the recipient using their name. The reminder message included the working hours of the psychology service at the patient's health center. The motivational messages addressed perceived barriers and benefits when seeking mental health services. The average appeal score of the seven SMS was 9.0 (SD±0.4) of 10 points. Participants did not make significant suggestions to change the wording of the messages. Five SMS were chosen to be used. This approach is likely to be applicable to other similar low-resource settings, and the methodology used can be adapted to develop SMS for other chronic conditions.

Airport surface detection equipment ASDE-3 radar set : appendix I

DOT National Transportation Integrated Search

1973-02-01

This specification establishes the performance, design, development, and test requirements for the Airport Surface Detection Equipment, the ASDE-3 Radar Set, intended as a replacement for the currently FAA-commissioned ASDE-2. It provides improvement...

Business Not as Usual: Developing Socially Conscious Entrepreneurs and Intrapreneurs

ERIC Educational Resources Information Center

Parris, Denise Linda; McInnis-Bowers, Cecilia

2017-01-01

Our objective was to design an introductory business course to shape the mind-sets and skill sets of the next generation of socially conscious practitioners--to help students develop a sense of self-efficacy built on the confidence that they can make a positive impact on the world using entrepreneurial thinking and action. Essentially, the focus…

Paradise: A Parallel Information System for EOSDIS

NASA Technical Reports Server (NTRS)

DeWitt, David

1996-01-01

The Paradise project was begun-in 1993 in order to explore the application of the parallel and object-oriented database system technology developed as a part of the Gamma, Exodus. and Shore projects to the design and development of a scaleable, geo-spatial database system for storing both massive spatial and satellite image data sets. Paradise is based on an object-relational data model. In addition to the standard attribute types such as integers, floats, strings and time, Paradise also provides a set of and multimedia data types, designed to facilitate the storage and querying of complex spatial and multimedia data sets. An individual tuple can contain any combination of this rich set of data types. For example, in the EOSDIS context, a tuple might mix terrain and map data for an area along with the latest satellite weather photo of the area. The use of a geo-spatial metaphor simplifies the task of fusing disparate forms of data from multiple data sources including text, image, map, and video data sets.

Designers as Teachers and Learners: Transferring Workplace Design Practice into Educational Settings

ERIC Educational Resources Information Center

Mawson, B.

2007-01-01

The nature of the design process and how to develop this skill in novice designers has been of considerable interest to technology educators. The relationship between workplace and school-based design is one area in which a need for further research has been identified by Hill and Anning (2001, "International Journal of Technology and Design…

Evaluation of health promotion in schools: a realistic evaluation approach using mixed methods.

PubMed

Pommier, Jeanine; Guével, Marie-Renée; Jourdan, Didier

2010-01-28

Schools are key settings for health promotion (HP) but the development of suitable approaches for evaluating HP in schools is still a major topic of discussion. This article presents a research protocol of a program developed to evaluate HP. After reviewing HP evaluation issues, the various possible approaches are analyzed and the importance of a realistic evaluation framework and a mixed methods (MM) design are demonstrated. The design is based on a systemic approach to evaluation, taking into account the mechanisms, context and outcomes, as defined in realistic evaluation, adjusted to our own French context using an MM approach. The characteristics of the design are illustrated through the evaluation of a nationwide HP program in French primary schools designed to enhance children's social, emotional and physical health by improving teachers' HP practices and promoting a healthy school environment. An embedded MM design is used in which a qualitative data set plays a supportive, secondary role in a study based primarily on a different quantitative data set. The way the qualitative and quantitative approaches are combined through the entire evaluation framework is detailed. This study is a contribution towards the development of suitable approaches for evaluating HP programs in schools. The systemic approach of the evaluation carried out in this research is appropriate since it takes account of the limitations of traditional evaluation approaches and considers suggestions made by the HP research community.

Evaluation of health promotion in schools: a realistic evaluation approach using mixed methods

PubMed Central

2010-01-01

Background Schools are key settings for health promotion (HP) but the development of suitable approaches for evaluating HP in schools is still a major topic of discussion. This article presents a research protocol of a program developed to evaluate HP. After reviewing HP evaluation issues, the various possible approaches are analyzed and the importance of a realistic evaluation framework and a mixed methods (MM) design are demonstrated. Methods/Design The design is based on a systemic approach to evaluation, taking into account the mechanisms, context and outcomes, as defined in realistic evaluation, adjusted to our own French context using an MM approach. The characteristics of the design are illustrated through the evaluation of a nationwide HP program in French primary schools designed to enhance children's social, emotional and physical health by improving teachers' HP practices and promoting a healthy school environment. An embedded MM design is used in which a qualitative data set plays a supportive, secondary role in a study based primarily on a different quantitative data set. The way the qualitative and quantitative approaches are combined through the entire evaluation framework is detailed. Discussion This study is a contribution towards the development of suitable approaches for evaluating HP programs in schools. The systemic approach of the evaluation carried out in this research is appropriate since it takes account of the limitations of traditional evaluation approaches and considers suggestions made by the HP research community. PMID:20109202

Examining the Use of First Principles of Instruction by Instructional Designers in a Short-Term, High Volume, Rapid Production of Online K-12 Teacher Professional Development Modules

ERIC Educational Resources Information Center

Mendenhall, Anne M.

2012-01-01

Merrill (2002a) created a set of fundamental principles of instruction that can lead to effective, efficient, and engaging (e[superscript 3]) instruction. The First Principles of Instruction (Merrill, 2002a) are a prescriptive set of interrelated instructional design practices that consist of activating prior knowledge, using specific portrayals…

Fragment-based quantitative structure-activity relationship (FB-QSAR) for fragment-based drug design.

PubMed

Du, Qi-Shi; Huang, Ri-Bo; Wei, Yu-Tuo; Pang, Zong-Wen; Du, Li-Qin; Chou, Kuo-Chen

2009-01-30

In cooperation with the fragment-based design a new drug design method, the so-called "fragment-based quantitative structure-activity relationship" (FB-QSAR) is proposed. The essence of the new method is that the molecular framework in a family of drug candidates are divided into several fragments according to their substitutes being investigated. The bioactivities of molecules are correlated with the physicochemical properties of the molecular fragments through two sets of coefficients in the linear free energy equations. One coefficient set is for the physicochemical properties and the other for the weight factors of the molecular fragments. Meanwhile, an iterative double least square (IDLS) technique is developed to solve the two sets of coefficients in a training data set alternately and iteratively. The IDLS technique is a feedback procedure with machine learning ability. The standard Two-dimensional quantitative structure-activity relationship (2D-QSAR) is a special case, in the FB-QSAR, when the whole molecule is treated as one entity. The FB-QSAR approach can remarkably enhance the predictive power and provide more structural insights into rational drug design. As an example, the FB-QSAR is applied to build a predictive model of neuraminidase inhibitors for drug development against H5N1 influenza virus. (c) 2008 Wiley Periodicals, Inc.

Information Engineering and Workflow Design in a Clinical Decision Support System for Colorectal Cancer Screening in Iran.

PubMed

Maserat, Elham; Seied Farajollah, Seiede Sedigheh; Safdari, Reza; Ghazisaeedi, Marjan; Aghdaei, Hamid Asadzadeh; Zali, Mohammad Reza

2015-01-01

Colorectal cancer is a major cause of morbidity and mortality throughout the world. Colorectal cancer screening is an optimal way for reducing of morbidity and mortality and a clinical decision support system (CDSS) plays an important role in predicting success of screening processes. DSS is a computer-based information system that improves the delivery of preventive care services. The aim of this article was to detail engineering of information requirements and work flow design of CDSS for a colorectal cancer screening program. In the first stage a screening minimum data set was determined. Developed and developing countries were analyzed for identifying this data set. Then information deficiencies and gaps were determined by check list. The second stage was a qualitative survey with a semi-structured interview as the study tool. A total of 15 users and stakeholders' perspectives about workflow of CDSS were studied. Finally workflow of DSS of control program was designed by standard clinical practice guidelines and perspectives. Screening minimum data set of national colorectal cancer screening program was defined in five sections, including colonoscopy data set, surgery, pathology, genetics and pedigree data set. Deficiencies and information gaps were analyzed. Then we designed a work process standard of screening. Finally workflow of DSS and entry stage were determined. A CDSS facilitates complex decision making for screening and has key roles in designing optimal interactions between colonoscopy, pathology and laboratory departments. Also workflow analysis is useful to identify data reconciliation strategies to address documentation gaps. Following recommendations of CDSS should improve quality of colorectal cancer screening.

Classifying E-Trainer Standards

ERIC Educational Resources Information Center

Julien, Anne

2005-01-01

Purpose: To set-up a classification of the types of profiles and competencies that are required to set-up a good e-learning programme. This approach provides a framework within which a set of standards can be defined for e-trainers. Design/methodology/approach: Open and distance learning (ODL) has been developing in Europe, due to new tools in…

Ready, Set, Respect! GLSEN's Elementary School Toolkit

ERIC Educational Resources Information Center

Gay, Lesbian and Straight Education Network (GLSEN), 2012

2012-01-01

"Ready, Set, Respect!" provides a set of tools to help elementary school educators ensure that all students feel safe and respected and develop respectful attitudes and behaviors. It is not a program to be followed but instead is designed to help educators prepare themselves for teaching about and modeling respect. The toolkit responds to…

Investigating the Impacts of Design Heuristics on Idea Initiation and Development

ERIC Educational Resources Information Center

Kramer, Julia; Daly, Shanna R.; Yilmaz, Seda; Seifert, Colleen M.; Gonzalez, Richard

2015-01-01

This paper presents an analysis of engineering students' use of Design Heuristics as part of a team project in an undergraduate engineering design course. Design Heuristics are an empirically derived set of cognitive "rules of thumb" for use in concept generation. We investigated heuristic use in the initial concept generation phase,…

Towards the Successful Integration of Design Thinking in Industrial Design Education

ERIC Educational Resources Information Center

Mubin, Omar; Novoa, Mauricio; Al Mahmud, Abdullah

2016-01-01

This paper narrates a case study on design thinking based education work in an industrial design honours program. Student projects were developed in a multi-disciplinary setting across a Computing and Engineering faculty that allowed promoting technologically and user driven innovation strategies. A renewed culture and environment for Industrial…

A Critical Review of Instructional Design Process of Distance Learning System

ERIC Educational Resources Information Center

Chaudry, Muhammad Ajmal; ur-Rahman, Fazal

2010-01-01

Instructional design refers to planning, development, delivery and evaluation of instructional system. It is an applied field of study aiming at the application of descriptive research outcomes in regular instructional settings. The present study was designed to critically review the process of instructional design at Allama Iqbal Open University…

Design Thinking and the School Library

ERIC Educational Resources Information Center

Coleman, Mary Catherine

2016-01-01

This past school year, the author set out to develop lessons that incorporated the design thinking process into her literature exploration curriculum in the school library. Design thinking is a term that the author has heard many times over the past few years in the context of education. Design thinking has been incorporated into the school…

Supervising Athletic Trainers' Perceptions of Professional Socialization of Graduate Assistant Athletic Trainers in the Collegiate Setting

PubMed Central

Thrasher, Ashley B.; Walker, Stacy E.; Hankemeier, Dorice A.; Pitney, William A.

2015-01-01

Context: Many newly credentialed athletic trainers gain initial employment as graduate assistants (GAs) in the collegiate setting, yet their socialization into their role is unknown. Exploring the socialization process of GAs in the collegiate setting could provide insight into how that process occurs. Objective: To explore the professional socialization of GAs in the collegiate setting to determine how GAs are socialized and developed as athletic trainers. Design: Qualitative study. Setting: Individual phone interviews. Patients or Other Participants: Athletic trainers (N = 21) who had supervised GAs in the collegiate setting for a minimum of 8 years (16 men [76%], 5 women [24%]; years of supervision experience = 14.6 ± 6.6). Data Collection and Analysis: Data were collected via phone interviews, which were recorded and transcribed verbatim. Data were analyzed by a 4-person consensus team with a consensual qualitative-research design. The team independently coded the data and compared ideas until a consensus was reached, and a codebook was created. Trustworthiness was established through member checks and multianalyst triangulation. Results: Four themes emerged: (1) role orientation, (2) professional development and support, (3) role expectations, and (4) success. Role orientation occurred both formally (eg, review of policies and procedures) and informally (eg, immediate role immersion). Professional development and support consisted of the supervisor mentoring and intervening when appropriate. Role expectations included decision-making ability, independent practice, and professionalism; however, supervisors often expected GAs to function as experienced, full-time staff. Success of the GAs depended on their adaptability and on the proper selection of GAs by supervisors. Conclusions: Supervisors socialize GAs into the collegiate setting by providing orientation, professional development, mentoring, and intervention when necessary. Supervisors are encouraged to use these socialization tactics to enhance the professional development of GAs in the collegiate setting. PMID:25347237

Designing Multimedia for Ecological Tourism in an Educational Setting.

ERIC Educational Resources Information Center

Passerini, Katia; Granger, Mary J.

This paper describes the development process of multimedia software designed to educate and provide awareness of ecotourism in Costa Rica. Ecotourism is a form of nature-based travel and recreational experience combining a respect for nature and local cultures with economic development incentives. The software intends to pursue the goals of…

Impact of Tactile Stimulation on Neurobehavioral Development of Premature Infants in Assiut City

ERIC Educational Resources Information Center

Sayed, Atyat Mohammed Hassan; Youssef, Magda Mohamed E.; Hassanein, Farouk El-Sayed; Mobarak, Amal Ahmed

2015-01-01

Objective: To assess impact of tactile stimulation on neurobehavioral development of premature infants in Assiut City. Design: Quasi-experimental research design. Setting: The study was conducted in the Neonatal Intensive Care Unit at Assiut University Children Hospital, Assiut General Hospital, Health Insurance Hospital (ElMabarah Hospital) and…

An Intervention Framework Designed to Develop the Collaborative Problem-Solving Skills of Primary School Students

ERIC Educational Resources Information Center

Gu, Xiaoqing; Chen, Shan; Zhu, Wenbo; Lin, Lin

2015-01-01

Considerable effort has been invested in innovative learning practices such as collaborative inquiry. Collaborative problem solving is becoming popular in school settings, but there is limited knowledge on how to develop skills crucial in collaborative problem solving in students. Based on the intervention design in social interaction of…

Ontology and Taxonomy Design and Development for Personalised Web-Based Learning Systems

ERIC Educational Resources Information Center

Yalcinalp, Serpil; Gulbahar, Yasemin

2010-01-01

Recent developments and new directions in education have emphasised learners' needs, profile and pedagogical aspects by focusing on learner-centered approaches in educational settings. e-Learning, on the other hand, guarantees learners the opportunity of learning in their own way, and leads to new considerations in course design. e-Learning is…

Child health in low-resource settings: pathways through UK paediatric training.

PubMed

Goenka, Anu; Magnus, Dan; Rehman, Tanya; Williams, Bhanu; Long, Andrew; Allen, Steve J

2013-11-01

UK doctors training in paediatrics benefit from experience of child health in low-resource settings. Institutions in low-resource settings reciprocally benefit from hosting UK trainees. A wide variety of opportunities exist for trainees working in low-resource settings including clinical work, research and the development of transferable skills in management, education and training. This article explores a range of pathways for UK trainees to develop experience in low-resource settings. It is important for trainees to start planning a robust rationale early for global child health activities via established pathways, in the interests of their own professional development as well as UK service provision. In the future, run-through paediatric training may include core elements of global child health, as well as designated 'tracks' for those wishing to develop their career in global child health further. Hands-on experience in low-resource settings is a critical component of these training initiatives.

An engineer at AeroVironment's Design Development Center inspects a set of silicon solar cells for p

NASA Technical Reports Server (NTRS)

2000-01-01

An engineer at AeroVironment's Design Development Center in Simi Valley, California, closely inspects a set of silicon solar cells for potential defects. The cells, fabricated by SunPower, Inc., of Sunnyvale, California, are among 64,000 solar cells which have been installed on the Helios Prototype solar-powered aircraft to provide power to its 14 electric motors and operating systems. Developed by AeroVironment under NASA's Environmental Research Aircraft and Sensor Technology (ERAST) project, the Helios Prototype is the forerunner of a planned fleet of slow-flying, long duration, high-altitude aircraft which can perform atmospheric science missions and serve as telecommunications relay platforms in the stratosphere. Target goals set by NASA for the giant 246-foot span flying wing include reaching and sustaining subsonic horizontal flight at 100,000 feet altitude in 2001, and sustained continuous flight for at least four days and nights in 2003 with the aid of a regenerative fuel cell-based energy storage system now in development.

Metal Matrix Composites: Custom-made Materials for Automotive and Aerospace Engineering

NASA Astrophysics Data System (ADS)

Kainer, Karl U.

2006-02-01

Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.

The Gene Set Builder: collation, curation, and distribution of sets of genes

PubMed Central

Yusuf, Dimas; Lim, Jonathan S; Wasserman, Wyeth W

2005-01-01

Background In bioinformatics and genomics, there are many applications designed to investigate the common properties for a set of genes. Often, these multi-gene analysis tools attempt to reveal sequential, functional, and expressional ties. However, while tremendous effort has been invested in developing tools that can analyze a set of genes, minimal effort has been invested in developing tools that can help researchers compile, store, and annotate gene sets in the first place. As a result, the process of making or accessing a set often involves tedious and time consuming steps such as finding identifiers for each individual gene. These steps are often repeated extensively to shift from one identifier type to another; or to recreate a published set. In this paper, we present a simple online tool which – with the help of the gene catalogs Ensembl and GeneLynx – can help researchers build and annotate sets of genes quickly and easily. Description The Gene Set Builder is a database-driven, web-based tool designed to help researchers compile, store, export, and share sets of genes. This application supports the 17 eukaryotic genomes found in version 32 of the Ensembl database, which includes species from yeast to human. User-created information such as sets and customized annotations are stored to facilitate easy access. Gene sets stored in the system can be "exported" in a variety of output formats – as lists of identifiers, in tables, or as sequences. In addition, gene sets can be "shared" with specific users to facilitate collaborations or fully released to provide access to published results. The application also features a Perl API (Application Programming Interface) for direct connectivity to custom analysis tools. A downloadable Quick Reference guide and an online tutorial are available to help new users learn its functionalities. Conclusion The Gene Set Builder is an Ensembl-facilitated online tool designed to help researchers compile and manage sets of genes in a user-friendly environment. The application can be accessed via . PMID:16371163

Development of pressure containment and damage tolerance technology for composite fuselage structures in large transport aircraft

NASA Technical Reports Server (NTRS)

Smith, P. J.; Thomson, L. W.; Wilson, R. D.

1986-01-01

NASA sponsored composites research and development programs were set in place to develop the critical engineering technologies in large transport aircraft structures. This NASA-Boeing program focused on the critical issues of damage tolerance and pressure containment generic to the fuselage structure of large pressurized aircraft. Skin-stringer and honeycomb sandwich composite fuselage shell designs were evaluated to resolve these issues. Analyses were developed to model the structural response of the fuselage shell designs, and a development test program evaluated the selected design configurations to appropriate load conditions.

Concepts for the development of light-weight composite structures for rotor burst containment

NASA Technical Reports Server (NTRS)

Holmes, A. G.

1977-01-01

A set of hypotheses is established as to what variables might control the design of a weight-efficient protective device. A particular experiment for evaluating the hypotheses and materials was designed. The design and methods for the analysis of results are described.

Machine Tool Technology. Automatic Screw Machine Troubleshooting & Set-Up Training Outlines [and] Basic Operator's Skills Set List.

ERIC Educational Resources Information Center

Anoka-Hennepin Technical Coll., Minneapolis, MN.

This set of two training outlines and one basic skills set list are designed for a machine tool technology program developed during a project to retrain defense industry workers at risk of job loss or dislocation because of conversion of the defense industry. The first troubleshooting training outline lists the categories of problems that develop…

Using a service design model to develop the "Passport to Safer Birth" in Nigeria and Uganda.

PubMed

Salgado, Mariana; Wendland, Melanie; Rodriguez, Damaris; Bohren, Meghan A; Oladapo, Olufemi T; Ojelade, Olubunmi A; Olalere, Adebimpe A; Luwangula, Ronald; Mugerwa, Kidza; Fawole, Bukola

2017-12-01

To demonstrate how a human-centered service design approach can generate practical tools for good-quality childbirth care in low-resource settings. As part of the WHO "Better Outcomes in Labour Difficulty" (BOLD) project, a service design approach was used in eight Ugandan and Nigerian health facilities and communities to develop the "Passport to Safer Birth." There are three phases: Research for Design, Concept Design, and Detail Design. These generated design principles, design archetype personas, and Passport prototypes. Data collection methods included desk research, interviews, group discussions, and journey mapping to identify touchpoints where the woman interacts with the health system. A total of 90 interviews, 12 observation hours, and 15 group discussions were undertaken. The resulting design principles were: a shared and deeper understanding of pregnancy and childbirth among family and community; family readiness for decision-making and action; and the woman's sense of being in control and being cared for. Four archetype personas of women emerged: Vulnerable; Passive; Empowered; Accepter. Subsequent development of the Passport to Safer Birth tools addressed three domains: Care Mediator; Expectation Manager; and Pregnancy Assistant. The service design approach can create innovative, human-centered service solutions to improve maternity care experiences and outcomes in low-resource settings. © 2017 International Federation of Gynecology and Obstetrics The World Health Organization retains copyright and all other rights in the manuscript of this article as submitted for publication.

Design specifications for NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction): Phase 2, Interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Twitty, A.F.; Handler, B.H.; Duncan, L.D.

Data Systems Engineering Organization (DSEO) personnel are developing a prototype computer aided instruction (CAI) system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project is to provide a prototype for implementing CAI as an enhancement to existing NALDA training. The CAI prototype project is being performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. In Phase II a structured design and specification document was completed that will provide the basis for development and implementationmore » of the desired CAI system. Phase III will consist of designing, developing, and testing a user interface which will extend the features of the Phase II prototype. The design of the CAI prototype has followed a rigorous structured analysis based on Yourdon/DeMarco methodology and Information Engineering tools. This document includes data flow diagrams, a data dictionary, process specifications, an entity-relationship diagram, a curriculum description, special function key definitions, and a set of standards developed for the NALDA CAI Prototype.« less

Information Technology in Science (ITS) Center for Teaching and Learning Environment Design Experiment Study for the Development of New Generation Leaders in Science Education

NASA Astrophysics Data System (ADS)

Herbert, B. E.; Schroeder, C.; Brody, S.; Cahill, T.; Kenimer, A.; Loving, C.; Schielack, J.

2003-12-01

The ITS Center for Teaching and Learning is a five-year NSF-funded collaborative effort to engage scientists and university and school or district-based science educators in the use of information technology to improve science teaching and learning at all levels. One assumption is that science and mathematics teaching and learning will be improved when they become more connected to the authentic science research done in field settings or laboratories. The effective use of information technology in science classrooms has been shown to help achieve this objective. As a design study that is -working toward a greater understanding of a -learning ecology", the research related to the creation and refinement of the ITS Centeres collaborative environment for professional development is contributing information about an important setting not often included in the descriptions of professional development, a setting that incorporates distributed expertise and resulting distributed growth in the various categories of participants: scientists, science graduate students, education researchers, education graduate students, and master teachers. Design-based research is an emerging paradigm for the study of learning in context through the systematic design and study of instructional strategies and tools. This presentation will discuss the results of the formative evaluation process that has moved the ITS Centeres collaborative environment for professional development through the iterative process from Phase I (the planned program designed in-house) to Phase II (the experimental program being tested in-house). In particular, we will focus on the development of the ITS Centeres Project Teams, which create learning experiences over two summers focused on the exploration of science, technology, engineering or mathematics (STEM) topics through the use of modeling, visualization and complex data sets to explore authentic scientific questions that can be integrated within the K-16 curriculum. Ongoing formative assessment of the Cohort I project teams led to a greater emphasis on participant exploration of authentic scientific questions and tighter integration of scientific explorations and development of participant inquiry projects.

A knowledge based system for scientific data visualization

NASA Technical Reports Server (NTRS)

Senay, Hikmet; Ignatius, Eve

1992-01-01

A knowledge-based system, called visualization tool assistant (VISTA), which was developed to assist scientists in the design of scientific data visualization techniques, is described. The system derives its knowledge from several sources which provide information about data characteristics, visualization primitives, and effective visual perception. The design methodology employed by the system is based on a sequence of transformations which decomposes a data set into a set of data partitions, maps this set of partitions to visualization primitives, and combines these primitives into a composite visualization technique design. Although the primary function of the system is to generate an effective visualization technique design for a given data set by using principles of visual perception the system also allows users to interactively modify the design, and renders the resulting image using a variety of rendering algorithms. The current version of the system primarily supports visualization techniques having applicability in earth and space sciences, although it may easily be extended to include other techniques useful in other disciplines such as computational fluid dynamics, finite-element analysis and medical imaging.

36 CFR 910.30 - General.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA AVENUE... planning area, the Standards set forth in this subpart C are uniformly applicable to any development within...

36 CFR 910.30 - General.

Code of Federal Regulations, 2011 CFR

2011-07-01

... AND UNIFORM STANDARDS FOR URBAN PLANNING AND DESIGN OF DEVELOPMENT WITHIN THE PENNSYLVANIA AVENUE... planning area, the Standards set forth in this subpart C are uniformly applicable to any development within...

A modified varying-stage adaptive phase II/III clinical trial design.

PubMed

Dong, Gaohong; Vandemeulebroecke, Marc

2016-07-01

Conventionally, adaptive phase II/III clinical trials are carried out with a strict two-stage design. Recently, a varying-stage adaptive phase II/III clinical trial design has been developed. In this design, following the first stage, an intermediate stage can be adaptively added to obtain more data, so that a more informative decision can be made. Therefore, the number of further investigational stages is determined based upon data accumulated to the interim analysis. This design considers two plausible study endpoints, with one of them initially designated as the primary endpoint. Based on interim results, another endpoint can be switched as the primary endpoint. However, in many therapeutic areas, the primary study endpoint is well established. Therefore, we modify this design to consider one study endpoint only so that it may be more readily applicable in real clinical trial designs. Our simulations show that, the same as the original design, this modified design controls the Type I error rate, and the design parameters such as the threshold probability for the two-stage setting and the alpha allocation ratio in the two-stage setting versus the three-stage setting have a great impact on the design characteristics. However, this modified design requires a larger sample size for the initial stage, and the probability of futility becomes much higher when the threshold probability for the two-stage setting gets smaller. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Verification and implementation of set-up empirical models in pile design : research project capsule.

DOT National Transportation Integrated Search

2016-08-01

The primary objectives of this research include: performing static and dynamic load tests on : newly instrumented test piles to better understand the set-up mechanism for individual soil : layers, verifying or recalibrating previously developed empir...

Analyzing CMOS/SOS fabrication for LSI arrays

NASA Technical Reports Server (NTRS)

Ipri, A. C.

1978-01-01

Report discusses set of design rules that have been developed as result of work with test arrays. Set of optimum dimensions is given that would maximize process output and would correspondingly minimize costs in fabrication of large-scale integration (LSI) arrays.

Hydraulic Performance of Set-Back Curb Inlets

DOT National Transportation Integrated Search

1998-06-01

The objective of this study was to develop hydraulic design charts for the location and sizing of set-back curb inlets. An extensive program of hydraulic model testing was conducted to evaluate the performance of various inlet opening sizes. The grad...

Creating a better picture of chronic pain: improving pain pictogram designs through systematic evaluation of user responses

PubMed Central

Stones, Catherine; Knapp, Peter; Closs, S Jose

2016-01-01

This article discusses the challenges of visually representing pain qualities in pictogram design. An existing set of 12 pictograms designed for people with literacy problems was evaluated to understand more about misunderstandings of pictogram interpretation. Two sets of university students from different disciplines were asked to interpret the pictograms, and a novel classification system was developed to categorise answer types, as ‘location’, ‘affective’, temporal’ or ‘literal’. Several design recommendations are made as a result that will help improve the design of pain pictograms as a whole as well as guide designers of related pictogram work. We demonstrate how, through the robust classification of incorrect responses, it is possible to extract useful comprehension error patterns to inform future design. PMID:27867507

Pattern-Based Design of Insider Threat Programs

DTIC Science & Technology

2014-12-01

also applied these models to develop best practices and technical controls for mitigating insider threat. In some cases of in- sider threat...departing insiders might take valuable IP with them. One set of practices and controls designed to reduce the risk of insider IP theft is based on case data...describing this set of practices and controls helps to balance the costs of monitoring employee behavior for suspicious actions against the risk of

Integrated residential photovoltaic array development

NASA Technical Reports Server (NTRS)

Royal, G. C., III

1981-01-01

Sixteen conceptual designs of residential photovoltaic arrays are described. Each design concept was evaluated by an industry advisory panel using a comprehensive set of technical, economic and institutional criteria. Key electrical and mechanical concerns that effect further array subsystem development are also discussed. Three integrated array design concepts were selected by the advisory panel for further optimization and development. From these concepts a single one will be selected for detailed analysis and prototype fabrication. The three concepts selected are: (1) An array of frameless panels/modules sealed in a T shaped zipper locking neoprene gasket grid pressure fitted into an extruded aluminum channel grid fastened across the rafters. (2) An array of frameless modules pressure fitted in a series of zipper locking EPDM rubber extrusions adhesively bonded to the roof. Series string voltage is developed using a set of integral tongue connectors and positioning blocks. (3) An array of frameless modules sealed by a silicone adhesive in a prefabricated grid of rigid tape and sheet metal attached to the roof.

Client Functional Assessment Data as Management Information: Woodrow Wilson Rehabilitation Center's Management Information System

PubMed Central

Steidle, Ernest F.

1983-01-01

This paper describes the design of a functional assessment system, a component of a management information system (MIS) that supports a comprehensive rehabilitation facility. Products of the subsystem document the functional status of rehabilitation clients through process evaluation reporting and outcomes reporting. The purpose of this paper is to describe the design of this MIS component. The environment supported, the integration requirements and the needed development approach is unique, requiring significant input from health care professionals, medical informatics specialists, statisticians and program evaluators. Strategies for the implementation of the functional assessment system are the major results reported in this paper. They are most useful to the systems designer or management engineer in a human service delivery setting. MIS plan development, computer file structure and access methods, and approaches to scheduling applications is described. Finally, the development of functional status measures is discussed. Application of the methodologies described will facilitate similar efforts towards systems development in other human service delivery settings.

Students' Construction of External Representations in Design-Based Learning Situations

ERIC Educational Resources Information Center

de Vries, Erica

2006-01-01

This article develops a theoretical framework for the study of students' construction of mixed multiple external representations in design-based learning situations involving an adaptation of professional tasks and tools to a classroom setting. The framework draws on research on professional design processes and on learning with multiple external…

Rapid Prototyping Methodology in Action: A Developmental Study.

ERIC Educational Resources Information Center

Jones, Toni Stokes; Richey, Rita C.

2000-01-01

Investigated the use of rapid prototyping methodologies in two projects conducted in a natural work setting to determine the nature of its use by designers and customers and the extent to which its use enhances traditional instructional design. Discusses design and development cycle-time reduction, product quality, and customer and designer…

Leader Noticing of Facilitation in Videocases of Mathematics Professional Development

ERIC Educational Resources Information Center

Lesseig, Kristin; Elliott, Rebekah; Kazemi, Elham; Kelley-Petersen, Megan; Campbell, Matthew; Mumme, Judith; Carroll, Cathy

2017-01-01

In this article, we report on "Researching Mathematics Leader Learning" ("RMLL"), a project designed to support leaders in learning how to facilitate robust opportunities for teachers' mathematical learning. Our two-phase research design allowed us to construct a set of videocase seminars, enact the seminar design with leaders,…

Designing and Developing Game-Like Learning Experience in Virtual Worlds: Challenges and Design Decisions of Novice Instructional Designers

ERIC Educational Resources Information Center

Yilmaz, Turkan Karakus; Cagiltay, Kursat

2016-01-01

Many virtual worlds have been adopted for implementation within educational settings because they are potentially useful for building effective learning environments. Since the flexibility of virtual worlds challenges to obtain effective and efficient educational outcomes, the design of such platforms need more attention. In the present study, the…

Students' Geocognition of Deep Time, Conceptualized in an Informal Educational Setting

ERIC Educational Resources Information Center

Clary, Renee M.; Brzusek, Robert F.; Wandersee, James H.

2009-01-01

Students in a Landscape Architecture Design 1 course (N = 25) at a research university in the southern US developed design solutions implementing geologic time for an informal education site. Those students who employed abstract metaphors for their designs (n = 8) were more successful than students who proceeded with a linear design construct.…

The Engineering of Engineering Education: Curriculum Development from a Designer's Point of View

ERIC Educational Resources Information Center

Rompelman, Otto; De Graaff, Erik

2006-01-01

Engineers have a set of powerful tools at their disposal for designing robust and reliable technical systems. In educational design these tools are seldom applied. This paper explores the application of concepts from the systems approach in an educational context. The paradigms of design methodology and systems engineering appear to be suitable…

User-Centered Design of Learn to Quit, a Smoking Cessation Smartphone App for People With Serious Mental Illness.

PubMed

Vilardaga, Roger; Rizo, Javier; Zeng, Emily; Kientz, Julie A; Ries, Richard; Otis, Chad; Hernandez, Kayla

2018-01-16

Smoking rates in the United States have been reduced in the past decades to 15% of the general population. However, up to 88% of people with psychiatric symptoms still smoke, leading to high rates of disease and mortality. Therefore, there is a great need to develop smoking cessation interventions that have adequate levels of usability and can reach this population. The objective of this study was to report the rationale, ideation, design, user research, and final specifications of a novel smoking cessation app for people with serious mental illness (SMI) that will be tested in a feasibility trial. We used a variety of user-centered design methods and materials to develop the tailored smoking cessation app. This included expert panel guidance, a set of design principles and theory-based smoking cessation content, development of personas and paper prototyping, usability testing of the app prototype, establishment of app's core vision and design specification, and collaboration with a software development company. We developed Learn to Quit, a smoking cessation app designed and tailored to individuals with SMI that incorporates the following: (1) evidence-based smoking cessation content from Acceptance and Commitment Therapy and US Clinical Practice Guidelines for smoking cessation aimed at providing skills for quitting while addressing mental health symptoms, (2) a set of behavioral principles to increase retention and comprehension of smoking cessation content, (3) a gamification component to encourage and sustain app engagement during a 14-day period, (4) an app structure and layout designed to minimize usability errors in people with SMI, and (5) a set of stories and visuals that communicate smoking cessation concepts and skills in simple terms. Despite its increasing importance, the design and development of mHealth technology is typically underreported, hampering scientific innovation. This report describes the systematic development of the first smoking cessation app tailored to people with SMI, a population with very high rates of nicotine addiction, and offers new design strategies to engage this population. mHealth developers in smoking cessation and related fields could benefit from a design strategy that capitalizes on the role visual engagement, storytelling, and the systematic application of behavior analytic principles to deliver evidence-based content. ©Roger Vilardaga, Javier Rizo, Emily Zeng, Julie A Kientz, Richard Ries, Chad Otis, Kayla Hernandez. Originally published in JMIR Serious Games (http://games.jmir.org), 16.01.2018.

Developing New Models of the COMP-LAB College Basic Writing Course for Other Settings. Final Report.

ERIC Educational Resources Information Center

Epes, Mary T.; And Others

A course designed for college students with severe writing problems, especially those stemming from nonstandard speech patterns, was adapted to a variety of noncollege settings: two high schools, a labor union, a manpower training program, and the staff education department of a psychiatric hospital. Each setting attempted to integrate classroom…

Designing with Care. A Guide to Adaptation of the Built Environment for Disabled Persons.

ERIC Educational Resources Information Center

Hanson, Lisa; And Others

Developed as part of the International Year of Disabled Persons, the guide is intended to help planners, architects, and designers to accommodate the built environment of developing regions for disabled persons. Guidelines focus on public building in urban or village settings and emphasize simple solutions to common problems. Following an…

Design, Development and Implementation of a Technology Enhanced Hybrid Course on Molecular Symmetry: Students' Outcomes and Attitudes

ERIC Educational Resources Information Center

Antonoglou, L. D.; Charistos, N. D.; Sigalas, M. P.

2011-01-01

A hybrid course of Molecular Symmetry and Group Theory which combines traditional face-to-face instruction with an online web enhanced learning environment within a Course Management System was designed, developed, and implemented with a purpose to establish an active and student-centred educational setting. Multi-representational educational…

Plant-mimetic Heat Pipes for Operation with Large Inertial and Gravitational Stresses

DTIC Science & Technology

2015-08-07

Pipes (SHLHP), we developed a set of mathematical models and experimental approaches. Our models provide design rules for heat transfer systems that could...number of fronts: 1) Design concepts and modeling tools: We have proposed a new design for loop heat pipes that operates with superheated liquid...and completed a mathematical model of steady state operation of such superheated loop heat pipes (SHLHP). We have also developed a transport theories

A Comparison of Two Balance Calibration Model Building Methods

NASA Technical Reports Server (NTRS)

DeLoach, Richard; Ulbrich, Norbert

2007-01-01

Simulated strain-gage balance calibration data is used to compare the accuracy of two balance calibration model building methods for different noise environments and calibration experiment designs. The first building method obtains a math model for the analysis of balance calibration data after applying a candidate math model search algorithm to the calibration data set. The second building method uses stepwise regression analysis in order to construct a model for the analysis. Four balance calibration data sets were simulated in order to compare the accuracy of the two math model building methods. The simulated data sets were prepared using the traditional One Factor At a Time (OFAT) technique and the Modern Design of Experiments (MDOE) approach. Random and systematic errors were introduced in the simulated calibration data sets in order to study their influence on the math model building methods. Residuals of the fitted calibration responses and other statistical metrics were compared in order to evaluate the calibration models developed with different combinations of noise environment, experiment design, and model building method. Overall, predicted math models and residuals of both math model building methods show very good agreement. Significant differences in model quality were attributable to noise environment, experiment design, and their interaction. Generally, the addition of systematic error significantly degraded the quality of calibration models developed from OFAT data by either method, but MDOE experiment designs were more robust with respect to the introduction of a systematic component of the unexplained variance.

Computer-aided system design

NASA Technical Reports Server (NTRS)

Walker, Carrie K.

1991-01-01

A technique has been developed for combining features of a systems architecture design and assessment tool and a software development tool. This technique reduces simulation development time and expands simulation detail. The Architecture Design and Assessment System (ADAS), developed at the Research Triangle Institute, is a set of computer-assisted engineering tools for the design and analysis of computer systems. The ADAS system is based on directed graph concepts and supports the synthesis and analysis of software algorithms mapped to candidate hardware implementations. Greater simulation detail is provided by the ADAS functional simulator. With the functional simulator, programs written in either Ada or C can be used to provide a detailed description of graph nodes. A Computer-Aided Software Engineering tool developed at the Charles Stark Draper Laboratory (CSDL CASE) automatically generates Ada or C code from engineering block diagram specifications designed with an interactive graphical interface. A technique to use the tools together has been developed, which further automates the design process.

Watershed-based survey designs

USGS Publications Warehouse

Detenbeck, N.E.; Cincotta, D.; Denver, J.M.; Greenlee, S.K.; Olsen, A.R.; Pitchford, A.M.

2005-01-01

Watershed-based sampling design and assessment tools help serve the multiple goals for water quality monitoring required under the Clean Water Act, including assessment of regional conditions to meet Section 305(b), identification of impaired water bodies or watersheds to meet Section 303(d), and development of empirical relationships between causes or sources of impairment and biological responses. Creation of GIS databases for hydrography, hydrologically corrected digital elevation models, and hydrologic derivatives such as watershed boundaries and upstream–downstream topology of subcatchments would provide a consistent seamless nationwide framework for these designs. The elements of a watershed-based sample framework can be represented either as a continuous infinite set defined by points along a linear stream network, or as a discrete set of watershed polygons. Watershed-based designs can be developed with existing probabilistic survey methods, including the use of unequal probability weighting, stratification, and two-stage frames for sampling. Case studies for monitoring of Atlantic Coastal Plain streams, West Virginia wadeable streams, and coastal Oregon streams illustrate three different approaches for selecting sites for watershed-based survey designs.

FY13 Annual Report: PHEV Advanced Series Gen-set Development/Demonstration Activity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chambon, Paul H.

2013-12-01

The objective of this project is to integrate ORNL advancements in vehicle technologies to properly design, and size a gen-set for various vehicle applications and then simulate multiple advanced series hybrid (HEV/PHEV) vehicles with the genset models.

HAWK MACH-III Intelligent Maintenance Tutor Design Development Report

DTIC Science & Technology

1986-12-01

objective can best be achieved by designing the MACH-IIl to provide augmented hands-on experience in troubleshooting in a setting which will emphasize...artificial intelligence supporting the development activity will focus on development of a strategy for effective and efficient hierarchical simulation of...main components of such a system are the system simulation and problem-solving expertise, the student model, and the tutorial strategies . In the MACH

Development and Engineering Design in Support of "Rover Ranch": A K-12 Outreach Software Project

NASA Technical Reports Server (NTRS)

Pascali, Raresh

2003-01-01

A continuation of the initial development started in the summer of 1999, the body of work performed in support of 'ROVer Ranch' Project during the present fellowship dealt with the concrete concept implementation and resolution of the related issues. The original work performed last summer focused on the initial examination and articulation of the concept treatment strategy, audience and market analysis for the learning technologies software. The presented work focused on finalizing the set of parts to be made available for building an AERCam Sprint type robot and on defining, testing and implementing process necessary to convert the design engineering files to VRML files. Through reverse engineering, an initial set of mission critical systems was designed for beta testing in schools. The files were created in ProEngineer, exported to VRML 1.0 and converted to VRML 97 (VRML 2.0) for final integration in the software. Attributes for each part were assigned using an in-house developed JAVA based program. The final set of attributes for each system, their mutual interaction and the identification of the relevant ones to be tracked, still remain to be decided.

Evidence-Based mHealth Chronic Disease Mobile App Intervention Design: Development of a Framework.

PubMed

Wilhide Iii, Calvin C; Peeples, Malinda M; Anthony Kouyaté, Robin C

2016-02-16

Mobile technology offers new capabilities that can help to drive important aspects of chronic disease management at both an individual and population level, including the ability to deliver real-time interventions that can be connected to a health care team. A framework that supports both development and evaluation is needed to understand the aspects of mHealth that work for specific diseases, populations, and in the achievement of specific outcomes in real-world settings. This framework should incorporate design structure and process, which are important to translate clinical and behavioral evidence, user interface, experience design and technical capabilities into scalable, replicable, and evidence-based mobile health (mHealth) solutions to drive outcomes. The purpose of this paper is to discuss the identification and development of an app intervention design framework, and its subsequent refinement through development of various types of mHealth apps for chronic disease. The process of developing the framework was conducted between June 2012 and June 2014. Informed by clinical guidelines, standards of care, clinical practice recommendations, evidence-based research, best practices, and translated by subject matter experts, a framework for mobile app design was developed and the refinement of the framework across seven chronic disease states and three different product types is described. The result was the development of the Chronic Disease mHealth App Intervention Design Framework. This framework allowed for the integration of clinical and behavioral evidence for intervention and feature design. The application to different diseases and implementation models guided the design of mHealth solutions for varying levels of chronic disease management. The framework and its design elements enable replicable product development for mHealth apps and may provide a foundation for the digital health industry to systematically expand mobile health interventions and validate their effectiveness across multiple implementation settings and chronic diseases.

Evidence-Based mHealth Chronic Disease Mobile App Intervention Design: Development of a Framework

PubMed Central

Peeples, Malinda M; Anthony Kouyaté, Robin C

2016-01-01

Background Mobile technology offers new capabilities that can help to drive important aspects of chronic disease management at both an individual and population level, including the ability to deliver real-time interventions that can be connected to a health care team. A framework that supports both development and evaluation is needed to understand the aspects of mHealth that work for specific diseases, populations, and in the achievement of specific outcomes in real-world settings. This framework should incorporate design structure and process, which are important to translate clinical and behavioral evidence, user interface, experience design and technical capabilities into scalable, replicable, and evidence-based mobile health (mHealth) solutions to drive outcomes. Objective The purpose of this paper is to discuss the identification and development of an app intervention design framework, and its subsequent refinement through development of various types of mHealth apps for chronic disease. Methods The process of developing the framework was conducted between June 2012 and June 2014. Informed by clinical guidelines, standards of care, clinical practice recommendations, evidence-based research, best practices, and translated by subject matter experts, a framework for mobile app design was developed and the refinement of the framework across seven chronic disease states and three different product types is described. Results The result was the development of the Chronic Disease mHealth App Intervention Design Framework. This framework allowed for the integration of clinical and behavioral evidence for intervention and feature design. The application to different diseases and implementation models guided the design of mHealth solutions for varying levels of chronic disease management. Conclusions The framework and its design elements enable replicable product development for mHealth apps and may provide a foundation for the digital health industry to systematically expand mobile health interventions and validate their effectiveness across multiple implementation settings and chronic diseases. PMID:26883135

Hydraulic Characteristics Of Two Bicycle-Safe Grate Inlet Designs

DOT National Transportation Integrated Search

1988-12-01

Expert Systems are computer programs designed to include a simulation of the reasoning and decision-making processes of human experts. This report provides a set of general guidelines for the development and distribution of highway related expert sys...

Design Change Model for Effective Scheduling Change Propagation Paths

NASA Astrophysics Data System (ADS)

Zhang, Hai-Zhu; Ding, Guo-Fu; Li, Rong; Qin, Sheng-Feng; Yan, Kai-Yin

2017-09-01

Changes in requirements may result in the increasing of product development project cost and lead time, therefore, it is important to understand how requirement changes propagate in the design of complex product systems and be able to select best options to guide design. Currently, a most approach for design change is lack of take the multi-disciplinary coupling relationships and the number of parameters into account integrally. A new design change model is presented to systematically analyze and search change propagation paths. Firstly, a PDS-Behavior-Structure-based design change model is established to describe requirement changes causing the design change propagation in behavior and structure domains. Secondly, a multi-disciplinary oriented behavior matrix is utilized to support change propagation analysis of complex product systems, and the interaction relationships of the matrix elements are used to obtain an initial set of change paths. Finally, a rough set-based propagation space reducing tool is developed to assist in narrowing change propagation paths by computing the importance of the design change parameters. The proposed new design change model and its associated tools have been demonstrated by the scheduling change propagation paths of high speed train's bogie to show its feasibility and effectiveness. This model is not only supportive to response quickly to diversified market requirements, but also helpful to satisfy customer requirements and reduce product development lead time. The proposed new design change model can be applied in a wide range of engineering systems design with improved efficiency.

Grouping Handicapped and Non-Handicapped Children in Mainstream Settings. The Functional Mainstreaming for Success (FMS) Project. Project Review Papers. Final Report--Part 3.

ERIC Educational Resources Information Center

Striefel, Sebastian; And Others

The review papers are a product of the 3-year project, "Functional Mainstreaming for Success," designed to develop a model for instructional mainstreaming of 162 handicapped children (3-6 years old) in community settings. The major feature of the project was development of a full reverse mainstreamed preschool program, which included…

Improved variance estimation of classification performance via reduction of bias caused by small sample size.

PubMed

Wickenberg-Bolin, Ulrika; Göransson, Hanna; Fryknäs, Mårten; Gustafsson, Mats G; Isaksson, Anders

2006-03-13

Supervised learning for classification of cancer employs a set of design examples to learn how to discriminate between tumors. In practice it is crucial to confirm that the classifier is robust with good generalization performance to new examples, or at least that it performs better than random guessing. A suggested alternative is to obtain a confidence interval of the error rate using repeated design and test sets selected from available examples. However, it is known that even in the ideal situation of repeated designs and tests with completely novel samples in each cycle, a small test set size leads to a large bias in the estimate of the true variance between design sets. Therefore different methods for small sample performance estimation such as a recently proposed procedure called Repeated Random Sampling (RSS) is also expected to result in heavily biased estimates, which in turn translates into biased confidence intervals. Here we explore such biases and develop a refined algorithm called Repeated Independent Design and Test (RIDT). Our simulations reveal that repeated designs and tests based on resampling in a fixed bag of samples yield a biased variance estimate. We also demonstrate that it is possible to obtain an improved variance estimate by means of a procedure that explicitly models how this bias depends on the number of samples used for testing. For the special case of repeated designs and tests using new samples for each design and test, we present an exact analytical expression for how the expected value of the bias decreases with the size of the test set. We show that via modeling and subsequent reduction of the small sample bias, it is possible to obtain an improved estimate of the variance of classifier performance between design sets. However, the uncertainty of the variance estimate is large in the simulations performed indicating that the method in its present form cannot be directly applied to small data sets.

Metallic Thermal Protection System Technology Development: Concepts, Requirements and Assessment Overview

NASA Technical Reports Server (NTRS)

Dorsey, John T.; Poteet, Carl C.; Chen, Roger R.; Wurster, Kathryn E.

2002-01-01

A technology development program was conducted to evolve an earlier metallic thermal protection system (TPS) panel design, with the goals of: improving operations features, increasing adaptability (ease of attaching to a variety of tank shapes and structural concepts), and reducing weight. The resulting Adaptable Robust Metallic Operable Reusable (ARMOR) TPS system incorporates a high degree of design flexibility (allowing weight and operability to be traded and balanced) and can also be easily integrated with a large variety of tank shapes, airframe structural arrangements and airframe structure/material concepts. An initial attempt has been made to establish a set of performance based TPS design requirements. A set of general (FARtype) requirements have been proposed, focusing on defining categories that must be included for a comprehensive design. Load cases required for TPS design must reflect the full flight envelope, including a comprehensive set of limit loads, However, including additional loads. such as ascent abort trajectories, as ultimate load cases, and on-orbit debris/micro-meteoroid hypervelocity impact, as one of the discrete -source -damage load cases, will have a significant impact on system design and resulting performance, reliability and operability. Although these load cases have not been established, they are of paramount importance for reusable vehicles, and until properly included, all sizing results and assessments of reliability and operability must be considered optimistic at a minimum.

A novel method for multifactorial bio-chemical experiments design based on combinational design theory.

PubMed

Wang, Xun; Sun, Beibei; Liu, Boyang; Fu, Yaping; Zheng, Pan

2017-01-01

Experimental design focuses on describing or explaining the multifactorial interactions that are hypothesized to reflect the variation. The design introduces conditions that may directly affect the variation, where particular conditions are purposely selected for observation. Combinatorial design theory deals with the existence, construction and properties of systems of finite sets whose arrangements satisfy generalized concepts of balance and/or symmetry. In this work, borrowing the concept of "balance" in combinatorial design theory, a novel method for multifactorial bio-chemical experiments design is proposed, where balanced templates in combinational design are used to select the conditions for observation. Balanced experimental data that covers all the influencing factors of experiments can be obtianed for further processing, such as training set for machine learning models. Finally, a software based on the proposed method is developed for designing experiments with covering influencing factors a certain number of times.

A robust rotorcraft flight control system design methodology utilizing quantitative feedback theory

NASA Technical Reports Server (NTRS)

Gorder, Peter James

1993-01-01

Rotorcraft flight control systems present design challenges which often exceed those associated with fixed-wing aircraft. First, large variations in the response characteristics of the rotorcraft result from the wide range of airspeeds of typical operation (hover to over 100 kts). Second, the assumption of vehicle rigidity often employed in the design of fixed-wing flight control systems is rarely justified in rotorcraft where rotor degrees of freedom can have a significant impact on the system performance and stability. This research was intended to develop a methodology for the design of robust rotorcraft flight control systems. Quantitative Feedback Theory (QFT) was chosen as the basis for the investigation. Quantitative Feedback Theory is a technique which accounts for variability in the dynamic response of the controlled element in the design robust control systems. It was developed to address a Multiple-Input Single-Output (MISO) design problem, and utilizes two degrees of freedom to satisfy the design criteria. Two techniques were examined for extending the QFT MISO technique to the design of a Multiple-Input-Multiple-Output (MIMO) flight control system (FCS) for a UH-60 Black Hawk Helicopter. In the first, a set of MISO systems, mathematically equivalent to the MIMO system, was determined. QFT was applied to each member of the set simultaneously. In the second, the same set of equivalent MISO systems were analyzed sequentially, with closed loop response information from each loop utilized in subsequent MISO designs. The results of each technique were compared, and the advantages of the second, termed Sequential Loop Closure, were clearly evident.

A toolbox and a record for scientific model development

NASA Technical Reports Server (NTRS)

Ellman, Thomas

1994-01-01

Scientific computation can benefit from software tools that facilitate construction of computational models, control the application of models, and aid in revising models to handle new situations. Existing environments for scientific programming provide only limited means of handling these tasks. This paper describes a two pronged approach for handling these tasks: (1) designing a 'Model Development Toolbox' that includes a basic set of model constructing operations; and (2) designing a 'Model Development Record' that is automatically generated during model construction. The record is subsequently exploited by tools that control the application of scientific models and revise models to handle new situations. Our two pronged approach is motivated by our belief that the model development toolbox and record should be highly interdependent. In particular, a suitable model development record can be constructed only when models are developed using a well defined set of operations. We expect this research to facilitate rapid development of new scientific computational models, to help ensure appropriate use of such models and to facilitate sharing of such models among working computational scientists. We are testing this approach by extending SIGMA, and existing knowledge-based scientific software design tool.

Design of dry sand soil stratified sampler

NASA Astrophysics Data System (ADS)

Li, Erkang; Chen, Wei; Feng, Xiao; Liao, Hongbo; Liang, Xiaodong

2018-04-01

This paper presents a design of a stratified sampler for dry sand soil, which can be used for stratified sampling of loose sand under certain conditions. Our group designed the mechanical structure of a portable, single - person, dry sandy soil stratified sampler. We have set up a mathematical model for the sampler. It lays the foundation for further development of design research.

Cognitive Task Analysis of Experts in Designing Multimedia Learning Object Guideline (M-LOG)

ERIC Educational Resources Information Center

Razak, Rafiza Abdul; Palanisamy, Punithavathy

2013-01-01

The purpose of this study was to design and develop a set of guidelines for multimedia learning objects to inform instructional designers (IDs) about the procedures involved in the process of content analysis. This study was motivated by the absence of standardized procedures in the beginning phase of the multimedia learning object design which is…

A conceptual design study for the secondary mirror drive of the shuttle infrared telescope facility (SIRTF)

NASA Technical Reports Server (NTRS)

Sager, R. E.; Cox, D. W.

1983-01-01

Various conceptual designs for the secondary mirror actuator system to be used in the Shuttle Infrared Telescope Facility (SIRTF) were evaluated. In addition, a set of design concepts was developed to assist in the solution of problems crucial for optimum performance of the secondary mirror actuator system. A specific conceptual approach was presented along with a plan for developing that approach and identifying issues of critical importance in the developmental effort.

Transfer and Use of Training Technology: A Model for Matching Training Approaches with Training Settings. Technical Report No. 74-24.

ERIC Educational Resources Information Center

Haverland, Edgar M.

The report describes a project designed to facilitate the transfer and utilization of training technology by developing a model for evaluating training approaches or innovtions in relation to the requirements, resources, and constraints of specific training settings. The model consists of two parallel sets of open-ended questions--one set…

Translations from Kommunist, Number 13, September 1978

DTIC Science & Technology

1978-10-30

programmed machine tool here is merely a component of a more complex reprogrammable technological system. This includes the robot machine tools with...sufficient possibilities for changing technological operations and processes and automated technological lines. 52 The reprogrammable automated sets will...simulate the possibilities of such sets. A new technological level will be developed in industry related to reprogrammable automated sets, their design

Employing the International Classification of Functioning, Disability and Health framework to capture user feedback in the design and testing stage of development of home-based arm rehabilitation technology.

PubMed

Sivan, Manoj; Gallagher, Justin; Holt, Ray; Weightman, Andrew; O'Connor, Rory; Levesley, Martin

2016-01-01

The purpose of this study was to evaluate the International Classification of Functioning, Disability and Health (ICF) as a framework to ensure that key aspects of user feedback are identified in the design and testing stages of development of a home-based upper limb rehabilitation system. Seventeen stroke survivors with residual upper limb weakness, and seven healthcare professionals with expertise in stroke rehabilitation, were enrolled in the user-centered design process. Through semi-structured interviews, they provided feedback on the hardware, software and impact of a home-based rehabilitation device to facilitate self-managed arm exercise. Members of the multidisciplinary clinical and engineering research team, based on previous experience and existing literature in user-centred design, developed the topic list for the interviews. Meaningful concepts were extracted from participants' interviews based on existing ICF linking rules and matched to categories within the ICF Comprehensive Core Set for stroke. Most of the interview concepts (except personal factors) matched the existing ICF Comprehensive Core Set categories. Personal factors that emerged from interviews e.g. gender, age, interest, compliance, motivation, choice and convenience that might determine device usability are yet to be categorised within the ICF framework and hence could not be matched to a specific Core Set category.

A General Set of Procedures for Constructivist Instructional Design: The New R2D2 Model.

ERIC Educational Resources Information Center

Willis, Jerry; Wright, Kristen Egeland

2000-01-01

Describes the R2D2 (Reflective, Recursive Design and Development) model of constructivist instructional design. Highlights include participatory teams; progressive problem solution; phronesis, or contextual understanding; dissemination, including summative evaluation; and a new paradigm that shifts from the industrial age to the information age.…

On Designing a Pervasive Mobile Learning Platform

ERIC Educational Resources Information Center

Laine, Teemu H.; Vinni, Mikko; Sedano, Carolina Islas; Joy, Mike

2010-01-01

This article presents the features, design and architecture of the Myst pervasive game platform that has been applied in creating pervasive mobile learning games in various contexts such as science festivals and museums in Finland. Based on our experiences with the development, we draw a set of design principles for creating successfully a…

Barrier Free Design Handbook: Accommodations for the Physically Handicapped.

ERIC Educational Resources Information Center

Veterans Administration, Washington, DC. Office of Construction.

The handbook sets forth design requirements for construction and renovation of buildings owned, leased, or funded by the Veterans Administration (VA), to permit physically handicapped persons ready access. The book is intended mainly for use by the VA staff and contracted architect/engineer firms involved in developing criteria and designing,…

Characterization and development of truck load spectra and growth factors for current and future pavement design practices in Louisiana : technical summary report.

DOT National Transportation Integrated Search

2011-07-01

Current roadway pavement design practices follow the standards set by the American Society of State : Highway and Transportation Officials (AASHTO), which require the use of an equivalent single axle load : (ESAL-18 kip single axle load) for design t...

An overview of ITER diagnostics (invited)

NASA Astrophysics Data System (ADS)

Young, Kenneth M.; Costley, A. E.; ITER-JCT Home Team; ITER Diagnostics Expert Group

1997-01-01

The requirements for plasma measurements for operating and controlling the ITER device have now been determined. Initial criteria for the measurement quality have been set, and the diagnostics that might be expected to achieve these criteria have been chosen. The design of the first set of diagnostics to achieve these goals is now well under way. The design effort is concentrating on the components that interact most strongly with the other ITER systems, particularly the vacuum vessel, blankets, divertor modules, cryostat, and shield wall. The relevant details of the ITER device and facility design and specific examples of diagnostic design to provide the necessary measurements are described. These designs have to take account of the issues associated with very high 14 MeV neutron fluxes and fluences, nuclear heating, high heat loads, and high mechanical forces that can arise during disruptions. The design work is supported by an extensive research and development program, which to date has concentrated on the effects these levels of radiation might cause on diagnostic components. A brief outline of the organization of the diagnostic development program is given.

[Concepts of development of the neurosurgical operative environment in the 21st century].

PubMed

Apuzzo, M; Liu, C

2002-01-01

The operative environment has to a large extent defines the "state of the art and science" of neurosurgery, which is now undergoing rapid reinvention. In order to remain current, each neurosurgeon should periodically reconsider their personal operative environment and its functional design with reference to modernity of practice as currently defined. Historical trends and their analysis offer predictive guides for development of such settings with an eye toward the future. Examination of technical developments in decade timeframes defines the progress in capability and need. Progressive minimalism of manipulation and the presence of operative definition with increasing precision are evident, with concurrent miniaturization of attendant computerized support systems, sensors, robotic interfaces, and imaging devices. These trends and developments offer the opportunity for simplificity of setting design with higher functionality as the desired endpoint.

An Intensive Academic English Course for Generation 1.5 ELLs Bound for Postsecondary Studies: Curriculum Design, Development, and Implementation

ERIC Educational Resources Information Center

Crossman, Katie; Pinchbeck, Geoffrey

2012-01-01

Immigrants and the children of immigrants who have completed their schooling in Canadian school settings, commonly referred to as Generation 1.5, are increasingly identified in the research literature as academically at risk due to inadequately developed academic language proficiency and learning strategies. This article describes the design,…

Participants' Perceptions of the Instructional Design of an Online Professional Development Module for Teaching English Language Learners: A Q Methodology Study

ERIC Educational Resources Information Center

Collins, Linda J.

2009-01-01

Using Q methodology, thirteen online instructors shared subjective opinions about the instructional design of an online professional development module intended to provide teachers with basic information for supporting English language learners academically. The researcher selected a set of thirty-six sort items comprised of screen shots taken…

CZT Detector and HXI Development at CASS/UCSD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rothschild, Richard E.; Tomsick, John A.; Matteson, James L.

2006-06-09

The scientific goals and concept design of the Hard X-ray Imager (HXI) for MIRAX are presented to set the context for a discussion of the status of the HXI development. Emphasis is placed upon the RENA ASIC performance, the detector module upgrades, and a planned high altitude balloon flight to validate the HXI design and performance in a near-space environment.

Design and routing of storm flows in an urbanized watershed without surface streams

NASA Astrophysics Data System (ADS)

Schaad, David E.; Farley, Jon; Haynes, Criss

2009-09-01

SummaryIn the karst geologic setting of Greenbrier County, West Virginia, USA, the drainage network in the watersheds do not support surface streams, but depend entirely on sinkholes, solution cavities, or injection wells as discharge points for accumulated storm water. By providing a systematic framework for designing and routing storms in this geologic setting, functioning retention and attenuation structures have been developed which are protective of water quality while still safely discharging storm water in a controlled manner to the subsurface. This article provides a rationale for the design methodology and then examines the successful implementation of an attenuation and storm water retention design to manage the surface discharges for an entire watershed. By examining the pre-development flows and evaluating future land use patterns (i.e., installation of impermeable surfaces over large areas), as well as sinkhole conveyance capabilities, it was necessary to examine alternative disposal options for collected storm water as well as devise a basin-wide management strategy to coordinate future development of the watershed. Additionally, innovative water quality measures were implemented to help prevent contamination from preferentially infiltrating into the subsurface as a result of these land development activities.

Full design of fuzzy controllers using genetic algorithms

NASA Technical Reports Server (NTRS)

Homaifar, Abdollah; Mccormick, ED

1992-01-01

This paper examines the applicability of genetic algorithms (GA) in the complete design of fuzzy logic controllers. While GA has been used before in the development of rule sets or high performance membership functions, the interdependence between these two components dictates that they should be designed together simultaneously. GA is fully capable of creating complete fuzzy controllers given the equations of motion of the system, eliminating the need for human input in the design loop. We show the application of this new method to the development of a cart controller.

Full design of fuzzy controllers using genetic algorithms

NASA Technical Reports Server (NTRS)

Homaifar, Abdollah; Mccormick, ED

1992-01-01

This paper examines the applicability of genetic algorithms in the complete design of fuzzy logic controllers. While GA has been used before in the development of rule sets or high performance membership functions, the interdependence between these two components dictates that they should be designed together simultaneously. GA is fully capable of creating complete fuzzy controllers given the equations of motion of the system, eliminating the need for human input in the design loop. We show the application of this new method to the development of a cart controller.

Structural design guidelines for concrete bridge decks reinforced with corrosion-resistant reinforcing bars.

DOT National Transportation Integrated Search

2014-10-01

This research program develops and validates structural design guidelines and details for concrete bridge decks with : corrosion-resistant reinforcing (CRR) bars. A two-phase experimental program was conducted where a control test set consistent : wi...

Planning for Power.

ERIC Educational Resources Information Center

Failla, Victor A.; Birk, Thomas A.

1999-01-01

Discusses the electrical power problems that can arise when schools try to integrate educational technology components into an existing facility, and how to plan the electrical power design to avoid power failures. Examines setting objectives, evaluating current electrical conditions, and developing the technology power design. (GR)

Conducting Educational Design Research

ERIC Educational Resources Information Center

McKenney, Susan; Reeves, Thomas

2012-01-01

Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

User-centric design of a personal assistance robot (FRASIER) for active aging.

PubMed

Padir, Taşkin; Skorinko, Jeanine; Dimitrov, Velin

2015-01-01

We present our preliminary results from the design process for developing the Worcester Polytechnic Institute's personal assistance robot, FRASIER, as an intelligent service robot for enabling active aging. The robot capabilities include vision-based object detection, tracking the user and help with carrying heavy items such as grocery bags or cafeteria trays. This work-in-progress report outlines our motivation and approach to developing the next generation of service robots for the elderly. Our main contribution in this paper is the development of a set of specifications based on the adopted user-centered design process, and realization of the prototype system designed to meet these specifications.

Ada(R) Test and Verification System (ATVS)

NASA Technical Reports Server (NTRS)

Strelich, Tom

1986-01-01

The Ada Test and Verification System (ATVS) functional description and high level design are completed and summarized. The ATVS will provide a comprehensive set of test and verification capabilities specifically addressing the features of the Ada language, support for embedded system development, distributed environments, and advanced user interface capabilities. Its design emphasis was on effective software development environment integration and flexibility to ensure its long-term use in the Ada software development community.

An Efficient Design Strategy for Logistic Regression Using Outcome- and Covariate-Dependent Pooling of Biospecimens Prior to Assay

PubMed Central

Lyles, Robert H.; Mitchell, Emily M.; Weinberg, Clarice R.; Umbach, David M.; Schisterman, Enrique F.

2016-01-01

Summary Potential reductions in laboratory assay costs afforded by pooling equal aliquots of biospecimens have long been recognized in disease surveillance and epidemiological research and, more recently, have motivated design and analytic developments in regression settings. For example, Weinberg and Umbach (1999, Biometrics 55, 718–726) provided methods for fitting set-based logistic regression models to case-control data when a continuous exposure variable (e.g., a biomarker) is assayed on pooled specimens. We focus on improving estimation efficiency by utilizing available subject-specific information at the pool allocation stage. We find that a strategy that we call “(y,c)-pooling,” which forms pooling sets of individuals within strata defined jointly by the outcome and other covariates, provides more precise estimation of the risk parameters associated with those covariates than does pooling within strata defined only by the outcome. We review the approach to set-based analysis through offsets developed by Weinberg and Umbach in a recent correction to their original paper. We propose a method for variance estimation under this design and use simulations and a real-data example to illustrate the precision benefits of (y,c)-pooling relative to y-pooling. We also note and illustrate that set-based models permit estimation of covariate interactions with exposure. PMID:26964741

Three-dimensional viscous design methodology for advanced technology aircraft supersonic inlet systems

NASA Technical Reports Server (NTRS)

Anderson, B. H.

1983-01-01

A broad program to develop advanced, reliable, and user oriented three-dimensional viscous design techniques for supersonic inlet systems, and encourage their transfer into the general user community is discussed. Features of the program include: (1) develop effective methods of computing three-dimensional flows within a zonal modeling methodology; (2) ensure reasonable agreement between said analysis and selective sets of benchmark validation data; (3) develop user orientation into said analysis; and (4) explore and develop advanced numerical methodology.

Towards responsible system development in health services: a discourse analysis study of design conflict resolution tactics.

PubMed

Irestig, Magnus; Timpka, Toomas

2010-02-01

We set out to examine design conflict resolution tactics used in development of large information systems for health services and to outline the design consequences for these tactics. Discourse analysis methods were applied to data collected from meetings conducted during the development of a web-based system in a public health context. We found that low risk tactics were characterized by design issues being managed within the formal mandate and competences of the design group. In comparison, high risk tactics were associated with irresponsible compromises, i.e. decisions being passed on to others or to later phases of the design process. The consequence of this collective disregard of issues such as responsibility and legitimacy is that the system design will be impossible to implement in factual health service contexts. The results imply that downstream responsibility issues have to be continuously dealt with in system development in health services.

LWS/SET Technology Experiment Carrier

NASA Technical Reports Server (NTRS)

Sherman, Barry; Giffin, Geoff

2002-01-01

This paper examines the approach taken to building a low-cost, modular spacecraft bus that can be used to support a variety of technology experiments in different space environments. It describes the techniques used and design drivers considered to ensure experiment independence from as yet selected host spacecraft. It describes the technology experiment carriers that will support NASA's Living With a Star Space Environment Testbed space missions. NASA has initiated the Living With a Star (LWS) Program to develop a better scientific understanding to address the aspects of the connected Sun-Earth system that affect life and society. A principal goal of the program is to bridge the gap between science, engineering, and user application communities. The Space Environment Testbed (SET) Project is one element of LWS. The Project will enable future science, operational, and commercial objectives in space and atmospheric environments by improving engineering approaches to the accommodation and/or mitigation of the effects of solar variability on technological systems. The SET Project is highly budget constrained and must seek to take advantage of as yet undetermined partnering opportunities for access to space. SET will conduct technology validation experiments hosted on available flight opportunities. The SET Testbeds will be developed in a manner that minimizes the requirements for accommodation, and will be flown as flight opportunities become available. To access the widest range of flight opportunities, two key development requirements are to maintain flexibility with respect to accommodation constraints and to have the capability to respond quickly to flight opportunities. Experiments, already developed to the technology readiness level of needing flight validation in the variable Sun-Earth environment, will be selected on the basis of the need for the subject technology, readiness for flight, need for flight resources and particular orbit. Experiments will be accumulated by the Project and manifested for specific flight opportunities as they become available. The SET Carrier is designed to present a standard set of interfaces to SET technology experiments and to be modular and flexible enough to interface to a variety of possible host spacecraft. The Carrier will have core components and mission unique components. Once the core carrier elements have been developed, only the mission unique components need to be defined and developed for any particular mission. This approach will minimize the mission specific cost and development schedule for a given flight opportunity. The standard set of interfaces provided by SET to experiments allows them to be developed independent of the particulars of a host spacecraft. The Carrier will provide the power, communication, and the necessary monitoring features to operate experiments. The Carrier will also provide all of the mechanical assemblies and harnesses required to adapt experiments to a particular host. Experiments may be hosted locally with the Carrier or remotely on the host spacecraft. The Carrier design will allow a single Carrier to support a variable number of experiments and will include features that support the ability to incrementally add experiments without disturbing the core architecture.

OSIRIX: open source multimodality image navigation software

NASA Astrophysics Data System (ADS)

Rosset, Antoine; Pysher, Lance; Spadola, Luca; Ratib, Osman

2005-04-01

The goal of our project is to develop a completely new software platform that will allow users to efficiently and conveniently navigate through large sets of multidimensional data without the need of high-end expensive hardware or software. We also elected to develop our system on new open source software libraries allowing other institutions and developers to contribute to this project. OsiriX is a free and open-source imaging software designed manipulate and visualize large sets of medical images: http://homepage.mac.com/rossetantoine/osirix/

Initial Multidisciplinary Design and Analysis Framework

NASA Technical Reports Server (NTRS)

Ozoroski, L. P.; Geiselhart, K. A.; Padula, S. L.; Li, W.; Olson, E. D.; Campbell, R. L.; Shields, E. W.; Berton, J. J.; Gray, J. S.; Jones, S. M.;

Investigating Rural Teachers' Professional Development, Instructional Knowledge, and Classroom Practice

ERIC Educational Resources Information Center

Glover, Todd A.; Nugent, Gwen C.; Chumney, Frances L.; Ihlo, Tanya; Shapiro, Edward S.; Guard, Kirra; Koziol, Natalie; Bovaird, Jim

2016-01-01

Teachers Speak was a national survey study designed to investigate the characteristics of rural elementary school teachers' existing professional development; differences in professional development practices between rural and non-rural settings; and the potential influence of professional development characteristics on rural teachers' knowledge,…

ControlShell - A real-time software framework

NASA Technical Reports Server (NTRS)

Schneider, Stanley A.; Ullman, Marc A.; Chen, Vincent W.

1991-01-01

ControlShell is designed to enable modular design and impplementation of real-time software. It is an object-oriented tool-set for real-time software system programming. It provides a series of execution and data interchange mechansims that form a framework for building real-time applications. These mechanisms allow a component-based approach to real-time software generation and mangement. By defining a set of interface specifications for intermodule interaction, ControlShell provides a common platform that is the basis for real-time code development and exchange.

Utilization of a CRT display light pen in the design of feedback control systems

NASA Technical Reports Server (NTRS)

Thompson, J. G.; Young, K. R.

1972-01-01

A hierarchical structure of the interlinked programs was developed to provide a flexible computer-aided design tool. A graphical input technique and a data structure are considered which provide the capability of entering the control system model description into the computer in block diagram form. An information storage and retrieval system was developed to keep track of the system description, and analysis and simulation results, and to provide them to the correct routines for further manipulation or display. Error analysis and diagnostic capabilities are discussed, and a technique was developed to reduce a transfer function to a set of nested integrals suitable for digital simulation. A general, automated block diagram reduction procedure was set up to prepare the system description for the analysis routines.

Fuel Cell Manufacturing Research and Development | Hydrogen and Fuel Cells

Science.gov Websites

methods to meet volume and cost targets for transportation and other applications. Fortunately, much can set Develop predictive models to help industry design better manufacturing processes and methods

47 CFR 0.241 - Authority delegated.

Code of Federal Regulations, 2012 CFR

2012-10-01

... database functions for unlicensed devices operating in the television broadcast bands (TV bands) as set... methods that will be used to designate TV bands database managers, to designate these database managers; to develop procedures that these database managers will use to ensure compliance with the...

47 CFR 0.241 - Authority delegated.

Code of Federal Regulations, 2013 CFR

2013-10-01

... database functions for unlicensed devices operating in the television broadcast bands (TV bands) as set... methods that will be used to designate TV bands database managers, to designate these database managers; to develop procedures that these database managers will use to ensure compliance with the...

47 CFR 0.241 - Authority delegated.

Code of Federal Regulations, 2011 CFR

2011-10-01

... database functions for unlicensed devices operating in the television broadcast bands (TV bands) as set... methods that will be used to designate TV bands database managers, to designate these database managers; to develop procedures that these database managers will use to ensure compliance with the...

Designing Waveform Sets with Good Correlation and Stopband Properties for MIMO Radar via the Gradient-Based Method

PubMed Central

Tang, Liang; Zhu, Yongfeng; Fu, Qiang

2017-01-01

Waveform sets with good correlation and/or stopband properties have received extensive attention and been widely used in multiple-input multiple-output (MIMO) radar. In this paper, we aim at designing unimodular waveform sets with good correlation and stopband properties. To formulate the problem, we construct two criteria to measure the correlation and stopband properties and then establish an unconstrained problem in the frequency domain. After deducing the phase gradient and the step size, an efficient gradient-based algorithm with monotonicity is proposed to minimize the objective function directly. For the design problem without considering the correlation weights, we develop a simplified algorithm, which only requires a few fast Fourier transform (FFT) operations and is more efficient. Because both of the algorithms can be implemented via the FFT operations and the Hadamard product, they are computationally efficient and can be used to design waveform sets with a large waveform number and waveform length. Numerical experiments show that the proposed algorithms can provide better performance than the state-of-the-art algorithms in terms of the computational complexity. PMID:28468308

Designing Waveform Sets with Good Correlation and Stopband Properties for MIMO Radar via the Gradient-Based Method.

PubMed

Tang, Liang; Zhu, Yongfeng; Fu, Qiang

2017-05-01

Waveform sets with good correlation and/or stopband properties have received extensive attention and been widely used in multiple-input multiple-output (MIMO) radar. In this paper, we aim at designing unimodular waveform sets with good correlation and stopband properties. To formulate the problem, we construct two criteria to measure the correlation and stopband properties and then establish an unconstrained problem in the frequency domain. After deducing the phase gradient and the step size, an efficient gradient-based algorithm with monotonicity is proposed to minimize the objective function directly. For the design problem without considering the correlation weights, we develop a simplified algorithm, which only requires a few fast Fourier transform (FFT) operations and is more efficient. Because both of the algorithms can be implemented via the FFT operations and the Hadamard product, they are computationally efficient and can be used to design waveform sets with a large waveform number and waveform length. Numerical experiments show that the proposed algorithms can provide better performance than the state-of-the-art algorithms in terms of the computational complexity.

Designing Professional Development That Works.

ERIC Educational Resources Information Center

Birman, Beatrice F.; Desimone, Laura; Porter, Andrew C.; Garet, Michael S.

2000-01-01

By studying survey data from 1,000 teachers participating in a Title II workshop, researchers identified three structural features (form, duration, and collective participation) that set a proper context for professional development. Three core features of professional-development learning experience include content focus, active learning, and…

A Co-Design Process Microanalysis: Stages and Facilitators of an Inquiry-Based and Technology-Enhanced Learning Scenario

ERIC Educational Resources Information Center

Barbera, Elena; Garcia, Iolanda; Fuertes-Alpiste, Marc

2017-01-01

This paper presents a case study of the co-design process for an online course on Sustainable Development (Degree in Tourism) involving the teacher, two students, and the project researchers. The co-design process was founded on an inquiry-based and technology-enhanced model that takes shape in a set of design principles. The research had two main…

Human discomfort response to noise combined with vertical vibration

NASA Technical Reports Server (NTRS)

Leatherwood, J. D.

1979-01-01

An experimental investigation was conducted (1) to determine the effects of combined environmental noise and vertical vibration upon human subjective discomfort response, (2) to develop a model for the prediction of passenger discomfort response to the combined environment, and (3) to develop a set of noise-vibration curves for use as criteria in ride quality design. Subjects were exposed to parametric combinations of noise and vibrations through the use of a realistic laboratory simulator. Results indicated that accurate prediction of passenger ride comfort requires knowledge of both the level and frequency content of the noise and vibration components of a ride environment as well as knowledge of the interactive effects of combined noise and vibration. A design tool in the form of an empirical model of passenger discomfort response to combined noise and vertical vibration was developed and illustrated by several computational examples. Finally, a set of noise-vibration criteria curves were generated to illustrate the fundamental design trade-off possible between passenger discomfort and the noise-vibration levels that produce the discomfort.

Effects of Isolate and Social Toys on the Social Interactions of Preschoolers in an Inclusive Head Start Classroom

ERIC Educational Resources Information Center

Elmore, Shannon Renee; Vail, Cynthia O.

2011-01-01

The purpose of this study was to evaluate the effects of manipulating toy sets on the social verbal interaction that occurs between preschool-age children with disabilities and their typically developing peers. A single-subject alternating-treatments design was used to evaluate the effects of manipulating social toy sets and isolate toy sets on…

Development of a core outcome set for medication review in older patients with multimorbidity and polypharmacy: a study protocol.

PubMed

Beuscart, Jean-Baptiste; Dalleur, Olivia; Boland, Benoit; Thevelin, Stefanie; Knol, Wilma; Cullinan, Shane; Schneider, Claudio; O'Mahony, Denis; Rodondi, Nicolas; Spinewine, Anne

2017-01-01

Medication review has been advocated to address the challenge of polypharmacy in older patients, yet there is no consensus on how best to evaluate its efficacy. Heterogeneity of outcomes reported in clinical trials can hinder the comparison of clinical trial findings in systematic reviews. Moreover, the outcomes that matter most to older patients might be under-reported or disregarded altogether. A core outcome set can address this issue as it defines a minimum set of outcomes that should be reported in all clinical trials in any particular field of research. As part of the European Commission-funded project, called OPtimising thERapy to prevent Avoidable hospital admissions in the Multimorbid elderly, this paper describes the methods used to develop a core outcome set for clinical trials of medication review in older patients with multimorbidity. The study was designed in several steps. First, a systematic review established which outcomes were measured in published and ongoing clinical trials of medication review in older patients. Second, we undertook semistructured interviews with older patients and carers aimed at identifying additional relevant outcomes. Then, a multilanguage European Delphi survey adapted to older patients was designed. The international Delphi survey was conducted with older patients, health care professionals, researchers, and clinical experts in geriatric pharmacotherapy to validate outcomes to be included in the core outcome set. Consensus meetings were conducted to validate the results. We present the method for developing a core outcome set for medication review in older patients with multimorbidity. This study protocol could be used as a basis to develop core outcome sets in other fields of geriatric research.

Axial Crushing of Thin-Walled Columns with Octagonal Section: Modeling and Design

NASA Astrophysics Data System (ADS)

Liu, Yucheng; Day, Michael L.

This chapter focus on numerical crashworthiness analysis of straight thinwalled columns with octagonal cross sections. Two important issues in this analysis are demonstrated here: computer modeling and crashworthiness design. In the first part, this chapter introduces a method of developing simplified finite element (FE) models for the straight thin-walled octagonal columns, which can be used for the numerical crashworthiness analysis. Next, this chapter performs a crashworthiness design for such thin-walled columns in order to maximize their energy absorption capability. Specific energy absorption (SEA) is set as the design objective, side length of the octagonal cross section and wall thickness are selected as design variables, and maximum crushing force (Pm) occurs during crashes is set as design constraint. Response surface method (RSM) is employed to formulate functions for both SEA and Pm.

Design, Development and Evaluation of a Field Learning Video Blog

ERIC Educational Resources Information Center

Petrovic, Otto

2016-01-01

The research question in this paper is how a Field Learning Video Blog (FLvlog) has to be designed in order to optimize learning processes taking into account changed everyday communication habits of students. The system is designed to meet pedagogical as well as functional requirements for learning in fieldwork settings. The main difference to…

Learning Compositional Simulation Models

DTIC Science & Technology

2010-01-01

techniques developed by social scientists, economists, and medical researchers over the past four decades. Quasi-experimental designs (QEDs) are...statistical techniques from the social sciences known as quasi- experimental design (QED). QEDs allow a researcher to exploit unique characteristics...can be grouped under the rubric “quasi-experimental design ” (QED), and they attempt to exploit inherent characteristics of observational data sets

Ready, Set, SCIENCE!: Putting Research to Work in K-8 Science Classrooms

ERIC Educational Resources Information Center

Michaels, Sarah; Shouse, Andrew W.; Schweingruber, Heidi A.

2007-01-01

What types of instructional experiences help K-8 students learn science with understanding? What do science educators, teachers, teacher leaders, science specialists, professional development staff, curriculum designers, and school administrators need to know to create and support such experiences? "Ready, Set, Science!" guides the way with an…

Distance Education: A Program and Facility Study.

ERIC Educational Resources Information Center

Holt, Malcolm; And Others

This publication provides both a review of the different technology modes that may be used for distance education and a set of guidelines for planning and developing conceptual designs for educational facilities capable of supporting technologically enhanced educational delivery systems in a variety of settings. The Distance Learning in Small…

Mathemagenic Activities Program: [Reports on Cognitive/Language Development].

ERIC Educational Resources Information Center

Smock, Charles D., Ed.

This set of 13 research reports, bulletins and papers is a product of the Mathemagenic Activities Program (MAP) for early childhood education of the University of Georgia Follow Through Program. Based on Piagetian theory, the MAP provides sequentially structured sets of curriculum materials and processes that are designed to continually challenge…

LMSS communication network design

NASA Technical Reports Server (NTRS)

1982-01-01

The architecture of the telecommunication network as the first step in the design of the LMSS system is described. A set of functional requirements including the total number of users to be served by the LMSS are hypothesized. The design parameters are then defined at length and are systematically selected such that the resultant system is capable of serving the hypothesized number of users. The design of the backhaul link is presented. The number of multiple backhaul beams required for communication to the base stations is determined. A conceptual procedure for call-routing and locating a mobile subscriber within the LMSS network is presented. The various steps in placing a call are explained, and the relationship between the two sets of UHF and S-band multiple beams is developed. A summary of the design parameters is presented.

Multipurpose microcontroller design for PUGAS 2

NASA Technical Reports Server (NTRS)

Weber, David M.; Deckard, Todd W.

1987-01-01

This paper will report on the past year's work on the development of the microcontroller design for the second Purdue University small self-contained payload. A first report on this effort was given at last year's conference by Ritter (1985). At that time, the project was still at the conceptual stage. Now a specific design has been set, prototyping has begun, and layout of the two-sided circuit board using CAD-techniques is nearing completion. A redesign of the overall concept of the circuit board was done to take advantage of the facilities available to students. An additional controller has been added to take large quantities of data concerning the shuttle environment during takeoff. The importance of setting a design time-line is discussed along with the electrical design considerations given to the controllers.

Development of a data warehouse at an academic health system: knowing a place for the first time.

PubMed

Dewitt, Jocelyn G; Hampton, Philip M

2005-11-01

In 1998, the University of Michigan Health System embarked upon the design, development, and implementation of an enterprise-wide data warehouse, intending to use prioritized business questions to drive its design and implementation. Because of the decentralized nature of the academic health system and the development team's inability to identify and prioritize those institutional business questions, however, a bottom-up approach was used to develop the enterprise-wide data warehouse. Specific important data sets were identified for inclusion, and the technical team designed the system with an enterprise view and architecture rather than as a series of data marts. Using this incremental approach of adding data sets, institutional leaders were able to experience and then further define successful use of the integrated data made available to them. Even as requests for the use and expansion of the data warehouse outstrip the resources assigned for support, the data warehouse has become an integral component of the institution's information management strategy. The authors discuss the approach, process, current status, and successes and failures of the data warehouse.

A compendium of controlled diffusion blades generated by an automated inverse design procedure

NASA Technical Reports Server (NTRS)

Sanz, Jose M.

1989-01-01

A set of sample cases was produced to test an automated design procedure developed at the NASA Lewis Research Center for the design of controlled diffusion blades. The range of application of the automated design procedure is documented. The results presented include characteristic compressor and turbine blade sections produced with the automated design code as well as various other airfoils produced with the base design method prior to the incorporation of the automated procedure.

Multi-objective optimal design of magnetorheological engine mount based on an improved non-dominated sorting genetic algorithm

NASA Astrophysics Data System (ADS)

Zheng, Ling; Duan, Xuwei; Deng, Zhaoxue; Li, Yinong

2014-03-01

A novel flow-mode magneto-rheological (MR) engine mount integrated a diaphragm de-coupler and the spoiler plate is designed and developed to isolate engine and the transmission from the chassis in a wide frequency range and overcome the stiffness in high frequency. A lumped parameter model of the MR engine mount in single degree of freedom system is further developed based on bond graph method to predict the performance of the MR engine mount accurately. The optimization mathematical model is established to minimize the total of force transmissibility over several frequency ranges addressed. In this mathematical model, the lumped parameters are considered as design variables. The maximum of force transmissibility and the corresponding frequency in low frequency range as well as individual lumped parameter are limited as constraints. The multiple interval sensitivity analysis method is developed to select the optimized variables and improve the efficiency of optimization process. An improved non-dominated sorting genetic algorithm (NSGA-II) is used to solve the multi-objective optimization problem. The synthesized distance between the individual in Pareto set and the individual in possible set in engineering is defined and calculated. A set of real design parameters is thus obtained by the internal relationship between the optimal lumped parameters and practical design parameters for the MR engine mount. The program flowchart for the improved non-dominated sorting genetic algorithm (NSGA-II) is given. The obtained results demonstrate the effectiveness of the proposed optimization approach in minimizing the total of force transmissibility over several frequency ranges addressed.

Toward Affective Development: A Program to Stimulate Psychological and Affective Development.

ERIC Educational Resources Information Center

Pearl, Linda F.

1987-01-01

Toward Affective Development (TAD), a 191-lesson program designed to stimulate psychological and affective development for third- through sixth-graders, can be used in special education, resource rooms, and remedial settings. TAD's five sections encompass: openness to experience, effects of emotions, group dynamics, individuality, and conflict…

Teachers engaging in Authentic Education Research as They Engage Students in Authentic Science Research: A Collaboration Among Scientists, Education Researchers and Practitioners

NASA Astrophysics Data System (ADS)

Schielack, J. F.; Herbert, B. E.

2004-12-01

The ITS Center for Teaching and Learning (http://its.tamu.edu) is a five-year NSF-funded collaborative effort to engage scientists, educational researchers, and educators in the use of information technology to enhance science teaching and learning at Grades 7 - 16. The ITS program combines graduate courses in science and science education leadership for both science and education graduate students with professional development experiences for classroom teachers. The design of the ITS professional development experience is based upon the assumption that science and mathematics teaching and learning will be improved when they become more connected to the authentic science research done in field settings or laboratories. The effective use of information technology to support inquiry in science classrooms has been shown to help achieve this objective. In particular, the professional development for teachers centers around support for implementing educational research in their own classrooms on the impacts of using information technology to promote authentic science experiences for their students. As a design study that is "working toward a greater understanding of the "learning ecology," the research related to the creation and refinement of the ITS Center's collaborative environment for integrating professional development for faculty, graduate students, and classroom teachers is contributing information about an important setting not often included in the descriptions of professional development, a setting that incorporates distributed expertise and resulting distributed growth in the various categories of participants: scientists, science graduate students, education researchers, science education graduate students, and master teachers. Design-based research is an emerging paradigm for the study of learning in context through the systematic design and study of instructional strategies and tools. In this presentation, we will discuss the results of the formative evaluation process that has moved the ITS Center's collaborative environment for professional development through the iterative process from Phase I (the planned program designed in-house) to Phase II (the experimental program being tested in-house). Phase II highlighted learning experiences over two summers focused on the exploration of environmentally-related science, technology, engineering or mathematics (STEM) topics through the use of modeling, visualization and complex data sets to explore authentic scientific questions that can be integrated within the 7-16 curriculum.

Development of an ICT in IBSE course for science teachers: A design-based research

NASA Astrophysics Data System (ADS)

Tran, Trinh-Ba

2018-01-01

Integration of ICT tools for measuring with sensors, analyzing video, and modelling into Inquiry-Based Science Education (IBSE) is a need globally recognized. The challenge to teachers is how to turn manipulation of equipment and software into manipulation of ideas. We have developed a short ICT in IBSE course to prepare and support science teachers to teach inquiry-based activities with ICT tools. Within the framework of design-based research, we first defined the pedagogical principles from the literature, developed core materials for teacher learning, explored boundary conditions of the training in different countries, and elaborated set-ups of the course for the Dutch, Slovak, and Vietnamese contexts. Next, we taught and evaluated three iterative cycles of the Dutch course set-ups for pre-service science teachers from four teacher-education institutes nationwide. In each cycle, data on the teacher learning was collected via observations, questionnaires, interviews, and documents. These data were then analyzed for the questions about faithful implementation and effectiveness of the course. Following the same approach, we taught and evaluated two cycles of the Slovak course set-ups for in-service science teachers in the context of the national accreditation programme for teacher professional development. In addition, we investigated applicability of the final Dutch course set-up in the context of the physics-education master program in Vietnam with adaptations geared to educational and cultural difference. Through the iterations of implementation, evaluation, and revision, eventually the course objectives were achieved to certain extent; the pedagogical principles and core materials proved to be effective and applicable in different contexts. We started this research and design project with the pedagogical principles and concluded it with these principles (i.e. complete theory-practice cycle, depth first, distributed learning, and ownership of learning) as the core of the basic design of the ICT in IBSE course. These principles can be considered as independent, validated educational products, which teacher educators can "buy into" and use for broader aims than only "ICT in IBSE" integration. Pedagogical principles establish the theoretical model underlying the course design, provide guidelines and structure to the (re)design, implementation, evaluation, and optimization process, and help to communicate the design-based research to others. The role of pedagogical principles in design-based research is indeed essential. Moreover, we incorporated a robustness test and a generalizability/transferability test as a further step in our design-based research and achieved successful outcomes with this step. Consequently, we strongly recommend the testing of the design product in routine implementation conditions and in considerably different contexts (e.g. different programmes or even countries) as part of design-based research.

Standardized development of computer software. Part 2: Standards

NASA Technical Reports Server (NTRS)

Tausworthe, R. C.

1978-01-01

This monograph contains standards for software development and engineering. The book sets forth rules for design, specification, coding, testing, documentation, and quality assurance audits of software; it also contains detailed outlines for the documentation to be produced.

Building a Better Campus: An Update on Building Codes.

ERIC Educational Resources Information Center

Madden, Michael J.

2002-01-01

Discusses the implications for higher education institutions in terms of facility planning, design, construction, and renovation of the move from regionally-developed model-building codes to two international sets of codes. Also addresses the new performance-based design option within the codes. (EV)

Evidence-Centered Design: Recommendations for Implementation and Practice

ERIC Educational Resources Information Center

Hendrickson, Amy; Ewing, Maureen; Kaliski, Pamela; Huff, Kristen

2013-01-01

Evidence-centered design (ECD) is an orientation towards assessment development. It differs from conventional practice in several ways and consists of multiple activities. Each of these activities results in a set of useful documentation: domain analysis, domain modeling, construction of the assessment framework, and assessment…

Practical application of AMLCDs for tactical fighter aircraft

NASA Astrophysics Data System (ADS)

McClaskey, Paul; Craddock, Roger

1995-06-01

Development and testing of an AMLCD-display to replace a dichroic display in a fighter aircraft environment has presented a unique set of technical challenges. This paper addresses design concepts used on the Engine Fuel Display and proposes design guidelines generally applicable for AMLCD projects.

Mission Analysis, Operations, and Navigation Toolkit Environment (Monte) Version 040

NASA Technical Reports Server (NTRS)

Sunseri, Richard F.; Wu, Hsi-Cheng; Evans, Scott E.; Evans, James R.; Drain, Theodore R.; Guevara, Michelle M.

2012-01-01

Monte is a software set designed for use in mission design and spacecraft navigation operations. The system can process measurement data, design optimal trajectories and maneuvers, and do orbit determination, all in one application. For the first time, a single software set can be used for mission design and navigation operations. This eliminates problems due to different models and fidelities used in legacy mission design and navigation software. The unique features of Monte 040 include a blowdown thruster model for GRAIL (Gravity Recovery and Interior Laboratory) with associated pressure models, as well as an updated, optimalsearch capability (COSMIC) that facilitated mission design for ARTEMIS. Existing legacy software lacked the capabilities necessary for these two missions. There is also a mean orbital element propagator and an osculating to mean element converter that allows long-term orbital stability analysis for the first time in compiled code. The optimized trajectory search tool COSMIC allows users to place constraints and controls on their searches without any restrictions. Constraints may be user-defined and depend on trajectory information either forward or backwards in time. In addition, a long-term orbit stability analysis tool (morbiter) existed previously as a set of scripts on top of Monte. Monte is becoming the primary tool for navigation operations, a core competency at JPL. The mission design capabilities in Monte are becoming mature enough for use in project proposals as well as post-phase A mission design. Monte has three distinct advantages over existing software. First, it is being developed in a modern paradigm: object- oriented C++ and Python. Second, the software has been developed as a toolkit, which allows users to customize their own applications and allows the development team to implement requirements quickly, efficiently, and with minimal bugs. Finally, the software is managed in accordance with the CMMI (Capability Maturity Model Integration), where it has been ap praised at maturity level 3.

Strict Constraint Feasibility in Analysis and Design of Uncertain Systems

NASA Technical Reports Server (NTRS)

Crespo, Luis G.; Giesy, Daniel P.; Kenny, Sean P.

2006-01-01

This paper proposes a methodology for the analysis and design optimization of models subject to parametric uncertainty, where hard inequality constraints are present. Hard constraints are those that must be satisfied for all parameter realizations prescribed by the uncertainty model. Emphasis is given to uncertainty models prescribed by norm-bounded perturbations from a nominal parameter value, i.e., hyper-spheres, and by sets of independently bounded uncertain variables, i.e., hyper-rectangles. These models make it possible to consider sets of parameters having comparable as well as dissimilar levels of uncertainty. Two alternative formulations for hyper-rectangular sets are proposed, one based on a transformation of variables and another based on an infinity norm approach. The suite of tools developed enable us to determine if the satisfaction of hard constraints is feasible by identifying critical combinations of uncertain parameters. Since this practice is performed without sampling or partitioning the parameter space, the resulting assessments of robustness are analytically verifiable. Strategies that enable the comparison of the robustness of competing design alternatives, the approximation of the robust design space, and the systematic search for designs with improved robustness characteristics are also proposed. Since the problem formulation is generic and the solution methods only require standard optimization algorithms for their implementation, the tools developed are applicable to a broad range of problems in several disciplines.

Helicopter-V/STOL dynamic wind and turbulence design methodology

NASA Technical Reports Server (NTRS)

Bailey, J. Earl

1987-01-01

Aircraft and helicopter accidents due to severe dynamic wind and turbulence continue to present challenging design problems. The development of the current set of design analysis tools for a aircraft wind and turbulence design began in the 1940's and 1950's. The areas of helicopter dynamic wind and turbulence modeling and vehicle response to severe dynamic wind inputs (microburst type phenomena) during takeoff and landing remain as major unsolved design problems from a lack of both environmental data and computational methodology. The development of helicopter and V/STOL dynamic wind and turbulence response computation methology is reviewed, the current state of the design art in industry is outlined, and comments on design methodology are made which may serve to improve future flight vehicle design.

A comprehensive custom panel design for routine hereditary cancer testing: preserving control, improving diagnostics and revealing a complex variation landscape.

PubMed

Castellanos, Elisabeth; Gel, Bernat; Rosas, Inma; Tornero, Eva; Santín, Sheila; Pluvinet, Raquel; Velasco, Juan; Sumoy, Lauro; Del Valle, Jesús; Perucho, Manuel; Blanco, Ignacio; Navarro, Matilde; Brunet, Joan; Pineda, Marta; Feliubadaló, Lidia; Capellá, Gabi; Lázaro, Conxi; Serra, Eduard

2017-01-04

We wanted to implement an NGS strategy to globally analyze hereditary cancer with diagnostic quality while retaining the same degree of understanding and control we had in pre-NGS strategies. To do this, we developed the I2HCP panel, a custom bait library covering 122 hereditary cancer genes. We improved bait design, tested different NGS platforms and created a clinically driven custom data analysis pipeline. The I2HCP panel was developed using a training set of hereditary colorectal cancer, hereditary breast and ovarian cancer and neurofibromatosis patients and reached an accuracy, analytical sensitivity and specificity greater than 99%, which was maintained in a validation set. I2HCP changed our diagnostic approach, involving clinicians and a genetic diagnostics team from panel design to reporting. The new strategy improved diagnostic sensitivity, solved uncertain clinical diagnoses and identified mutations in new genes. We assessed the genetic variation in the complete set of hereditary cancer genes, revealing a complex variation landscape that coexists with the disease-causing mutation. We developed, validated and implemented a custom NGS-based strategy for hereditary cancer diagnostics that improved our previous workflows. Additionally, the existence of a rich genetic variation in hereditary cancer genes favors the use of this panel to investigate their role in cancer risk.

DoD Electronic Data Interchange (EDI) Convention: ASC X12 Transaction Set 838 Trading Partner Profile (Registration) (Version 003020).

DTIC Science & Technology

1993-01-01

elements in the transaction set. A convention is usually developed before any computer EDI sys - tems development work and serves as a design document when...Segment For If 1 Comment 1 etc. Nabe 1: This ba noe. NOW Sae 0 am U’ of to (nmbered. Commer A: Thim 6a manuww COMMENTS we not put am fti 1-dw-d 0

Requirements controlled design: A method for discovery of discontinuous system boundaries in the requirements hyperspace

NASA Astrophysics Data System (ADS)

Hollingsworth, Peter Michael

The drive toward robust systems design, especially with respect to system affordability throughout the system life-cycle, has led to the development of several advanced design methods. While these methods have been extremely successful in satisfying the needs for which they have been developed, they inherently leave a critical area unaddressed. None of them fully considers the effect of requirements on the selection of solution systems. The goal of all of current modern design methodologies is to bring knowledge forward in the design process to the regions where more design freedom is available and design changes cost less. Therefore, it seems reasonable to consider the point in the design process where the greatest restrictions are placed on the final design, the point in which the system level requirements are set. Historically the requirements have been treated as something handed down from above. However, neither the customer nor the solution provider completely understood all of the options that are available in the broader requirements space. If a method were developed that provided the ability to understand the full scope of the requirements space, it would allow for a better comparison of potential solution systems with respect to both the current and potential future requirements. The key to a requirements conscious method is to treat requirements differently from the traditional approach. The method proposed herein is known as Requirements Controlled Design (RCD). By treating the requirements as a set of variables that control the behavior of the system, instead of variables that only define the response of the system, it is possible to determine a-priori what portions of the requirements space that any given system is capable of satisfying. Additionally, it should be possible to identify which systems can satisfy a given set of requirements and the locations where a small change in one or more requirements poses a significant risk to a design program. This thesis puts forth the theory and methodology to enable RCD, and details and validates a specific method called the Modified Strength Pareto Evolutionary Algorithm (MSPEA).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cho, M; Kim, T; Kang, S

Purpose: The purpose of this work is to develop a new patient set-up monitoring system using force sensing resistor (FSR) sensors that can confirm pressure of contact surface and evaluate its feasibility. Methods: In this study, we focused on develop the patient set-up monitoring system to compensate for the limitation of existing optical based monitoring system, so the developed system can inform motion in the radiation therapy. The set-up monitoring system was designed consisting of sensor units (FSR sensor), signal conditioning devices (USB cable/interface electronics), a control PC, and a developed analysis software. The sensor unit was made by attachingmore » FSR sensor and dispersing pressure sponge to prevent error which is caused by concentrating specific point. Measured signal from the FSR sensor was sampled to arduino mega 2560 microcontroller, transferred to control PC by using serial communication. The measured data went through normalization process. The normalized data was displayed through the developed graphic user interface (GUI) software. The software was designed to display a single sensor unit intensity (maximum 16 sensors) and display 2D pressure distribution (using 16 sensors) according to the purpose. Results: Changes of pressure value according to motion was confirmed by the developed set-up monitoring system. Very small movement such as little physical change in appearance can be confirmed using a single unit and using 2D pressure distribution. Also, the set-up monitoring system can observe in real time. Conclusion: In this study, we developed the new set-up monitoring system using FSR sensor. Especially, we expect that the new set-up monitoring system is suitable for motion monitoring of blind area that is hard to confirm existing optical system and compensate existing optical based monitoring system. As a further study, an integrated system will be constructed through correlation of existing optical monitoring system. This work was supported by the Industrial R&D program of MOTIE/KEIT. [10048997, Development of the core technology for integrated therapy devices based on real-time MRI guided tumor tracking] and the Mid-career Researcher Program (2014R1A2A1A10050270) through the National Research Foundation of Korea funded by the Ministry of Science, ICT&Future Planning.« less

The development of a patient-specific method for physiotherapy goal setting: a user-centered design.

PubMed

Stevens, Anita; Köke, Albère; van der Weijden, Trudy; Beurskens, Anna

2018-08-01

To deliver client-centered care, physiotherapists need to identify the patients' individual treatment goals. However, practical tools for involving patients in goal setting are lacking. The purpose of this study was to improve the frequently used Patient-Specific Complaints instrument in Dutch physiotherapy, and to develop it into a feasible method to improve physiotherapy goal setting. An iterative user-centered design was conducted in co-creation with the physiotherapists and patients, in three phases. Their needs and preferences were identified by means of group meetings and questionnaires. The new method was tested in several field tests in physiotherapy practices. Four main objectives for improvement were formulated: clear instructions for the administration procedure, targeted use across the physiotherapy process, client-activating communication skills, and a client-centered attitude of the physiotherapist. A theoretical goal-setting framework and elements of shared decision making were integrated into the new-called, Patient-Specific Goal-setting method, together with a practical training course. The user-centered approach resulted in a goal-setting method that is fully integrated in the physiotherapy process. The new goal-setting method contributes to a more structured approach to goal setting and enables patient participation and goal-oriented physiotherapy. Before large-scale implementation, its feasibility in physiotherapy practice needs to be investigated. Implications for rehabilitation Involving patients and physiotherapists in the development and testing of a goal-setting method, increases the likelihood of its feasibility in practice. The integration of a goal-setting method into the physiotherapy process offers the opportunity to focus more fully on the patient's goals. Patients should be informed about the aim of every step of the goal-setting process in order to increase their awareness and involvement. Training physiotherapists to use a patient-specific method for goal setting is crucial for a correct application.

Physics and engineering studies on the MITICA accelerator: comparison among possible design solutions

NASA Astrophysics Data System (ADS)

Agostinetti, P.; Antoni, V.; Cavenago, M.; Chitarin, G.; Pilan, N.; Marcuzzi, D.; Serianni, G.; Veltri, P.

2011-09-01

Consorzio RFX in Padova is currently using a comprehensive set of numerical and analytical codes, for the physics and engineering design of the SPIDER (Source for Production of Ion of Deuterium Extracted from RF plasma) and MITICA (Megavolt ITER Injector Concept Advancement) experiments, planned to be built at Consorzio RFX. This paper presents a set of studies on different possible geometries for the MITICA accelerator, with the objective to compare different design concepts and choose the most suitable one (or ones) to be further developed and possibly adopted in the experiment. Different design solutions have been discussed and compared, taking into account their advantages and drawbacks by both the physics and engineering points of view.

Designing an activity-based costing model for a non-admitted prisoner healthcare setting.

PubMed

Cai, Xiao; Moore, Elizabeth; McNamara, Martin

2013-09-01

To design and deliver an activity-based costing model within a non-admitted prisoner healthcare setting. Key phases from the NSW Health clinical redesign methodology were utilised: diagnostic, solution design and implementation. The diagnostic phase utilised a range of strategies to identify issues requiring attention in the development of the costing model. The solution design phase conceptualised distinct 'building blocks' of activity and cost based on the speciality of clinicians providing care. These building blocks enabled the classification of activity and comparisons of costs between similar facilities. The implementation phase validated the model. The project generated an activity-based costing model based on actual activity performed, gained acceptability among clinicians and managers, and provided the basis for ongoing efficiency and benchmarking efforts.

[Measuring the impact of practices of social appropriation of science and technology: a proposal for a set of indicators].

PubMed

Daza-Caicedo, Sandra; Maldonado, Oscar; Arboleda-Castrillón, Tania; Falla, Sigrid; Moreno, Pablo; Tafur-Sequera, Mayali; Papagayo, Diana

2017-01-01

We propose a set of qualitative indicators for monitoring practices of social appropriation of science and technology. The design of this set is based on the Maloka case, but it can be of use to multiple actors involved in the social appropriation of science and technology (referred to by its Spanish acronym, ASCyT). The introduction discusses the concept of ASCyT. The first section provides a review of the literature about measuring activities that link science and society. The second section explains why it is important to develop this type of measurement. The third section lays out the methodology used in designing the indicators. The fourth section explains the set of indicators and the fifth reflects on that process.

BBU design of linear induction accelerator cells for radiography application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shang, C.C.; Chen, Y.J.; Gaporaso, G.J.

1997-05-06

There is an ongoing effort to develop accelerating modules for high-current electron accelerators for advanced radiography application. Accelerating modules with low beam-cavity coupling impedances along with gap designs with acceptable field stresses comprise a set of fundamental design criteria. We examine improved cell designs which have been developed for accelerator application in several radiographic operating regimes. We evaluate interaction impedances, analyze the effects of beam structure coupling on beam dynamics (beam break-up instability and corkscrew motion). We also provide estimates of coupling through interesting new high-gradient insulators and evaluate their potential future application in induction cells.

How to Develop Electrochemistry SETS-Based Interactive E-Book?

NASA Astrophysics Data System (ADS)

Munawwarah, M.; Anwar, S.; Sunarya, Y.

2017-09-01

This study aims to develop SETS-based interactive e-book teaching material through 4S TMD methode. The research methode in this study is the Development Research (RD) Richey and Klein that consists of design, phase, and evaluation. The design step was to analyze and plan the types of teaching materials instructional developed. There are 12 indicators from 3 standard competences that produced in selection step based new curriculum, the compatibility subject matter and indicators, and the relations between value and subject matter. Structuring steps yield concept map, macro structure, and multiple representation that were arranged to be first draft of teaching material that was used for develop the instruments for characterization step. Chatacterization test have been done to students in 12nd grades with 68 texts. Characterization results indicated that there were some texts included to difficult text. Difficult texts have been reduced with the ways back to qualitative steps and particulation. The second draft of teaching material was arranged based the results of didactic reduction of difficult texts. This draft was used for arranged interactive e-book. The characteristics of this SETS-based interactive e-book that developed were mention about the connection between science with environment, technology, and society. This interactive e-book consists of animation, task, and quizes that taken the interaction of students directly.

Automatic Synthesis of UML Designs from Requirements in an Iterative Process

NASA Technical Reports Server (NTRS)

Schumann, Johann; Whittle, Jon; Clancy, Daniel (Technical Monitor)

2001-01-01

The Unified Modeling Language (UML) is gaining wide popularity for the design of object-oriented systems. UML combines various object-oriented graphical design notations under one common framework. A major factor for the broad acceptance of UML is that it can be conveniently used in a highly iterative, Use Case (or scenario-based) process (although the process is not a part of UML). Here, the (pre-) requirements for the software are specified rather informally as Use Cases and a set of scenarios. A scenario can be seen as an individual trace of a software artifact. Besides first sketches of a class diagram to illustrate the static system breakdown, scenarios are a favorite way of communication with the customer, because scenarios describe concrete interactions between entities and are thus easy to understand. Scenarios with a high level of detail are often expressed as sequence diagrams. Later in the design and implementation stage (elaboration and implementation phases), a design of the system's behavior is often developed as a set of statecharts. From there (and the full-fledged class diagram), actual code development is started. Current commercial UML tools support this phase by providing code generators for class diagrams and statecharts. In practice, it can be observed that the transition from requirements to design to code is a highly iterative process. In this talk, a set of algorithms is presented which perform reasonable synthesis and transformations between different UML notations (sequence diagrams, Object Constraint Language (OCL) constraints, statecharts). More specifically, we will discuss the following transformations: Statechart synthesis, introduction of hierarchy, consistency of modifications, and "design-debugging".

Design and implementation of a hospital-based usability laboratory: insights from a Department of Veterans Affairs laboratory for health information technology.

PubMed

Russ, Alissa L; Weiner, Michael; Russell, Scott A; Baker, Darrell A; Fahner, W Jeffrey; Saleem, Jason J

2012-12-01

Although the potential benefits of more usable health information technologies (HIT) are substantial-reduced HIT support costs, increased work efficiency, and improved patient safety--human factors methods to improve usability are rarely employed. The US Department of Veterans Affairs (VA) has emerged as an early leader in establishing usability laboratories to inform the design of HIT, including its electronic health record. Experience with a usability laboratory at a VA Medical Center provides insights on how to design, implement, and leverage usability laboratories in the health care setting. The VA Health Services Research and Development Service Human-Computer Interaction & Simulation Laboratory emerged as one of the first VA usability laboratories and was intended to provide research-based findings about HIT designs. This laboratory supports rapid prototyping, formal usability testing, and analysis tools to assess existing technologies, alternative designs, and potential future technologies. RESULTS OF IMPLEMENTATION: Although the laboratory has maintained a research focus, it has become increasingly integrated with VA operations, both within the medical center and on a national VA level. With this resource, data-driven recommendations have been provided for the design of HIT applications before and after implementation. The demand for usability testing of HIT is increasing, and information on how to develop usability laboratories for the health care setting is often needed. This article may assist other health care organizations that want to invest in usability resources to improve HIT. The establishment and utilization of usability laboratories in the health care setting may improve HIT designs and promote safe, high-quality care for patients.

PISA for Development and the Sustainable Development Goals. PISA for Development Brief 17

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

The PISA for Development brief series is a set of concise monthly education policy-oriented notes published by the OECD which are designed to describe a specific PISA for Development topic. In this brief, PISA's role in monitoring the fourth United Nations Sustainable Development Goal--to "ensure inclusive and equitable quality education and…

Core Outcome Set-STAndards for Development: The COS-STAD recommendations.

PubMed

Kirkham, Jamie J; Davis, Katherine; Altman, Douglas G; Blazeby, Jane M; Clarke, Mike; Tunis, Sean; Williamson, Paula R

2017-11-01

The use of core outcome sets (COS) ensures that researchers measure and report those outcomes that are most likely to be relevant to users of their research. Several hundred COS projects have been systematically identified to date, but there has been no formal quality assessment of these studies. The Core Outcome Set-STAndards for Development (COS-STAD) project aimed to identify minimum standards for the design of a COS study agreed upon by an international group, while other specific guidance exists for the final reporting of COS development studies (Core Outcome Set-STAndards for Reporting [COS-STAR]). An international group of experienced COS developers, methodologists, journal editors, potential users of COS (clinical trialists, systematic reviewers, and clinical guideline developers), and patient representatives produced the COS-STAD recommendations to help improve the quality of COS development and support the assessment of whether a COS had been developed using a reasonable approach. An open survey of experts generated an initial list of items, which was refined by a 2-round Delphi survey involving nearly 250 participants representing key stakeholder groups. Participants assigned importance ratings for each item using a 1-9 scale. Consensus that an item should be included in the set of minimum standards was defined as at least 70% of the voting participants from each stakeholder group providing a score between 7 and 9. The Delphi survey was followed by a consensus discussion with the study management group representing multiple stakeholder groups. COS-STAD contains 11 minimum standards that are the minimum design recommendations for all COS development projects. The recommendations focus on 3 key domains: the scope, the stakeholders, and the consensus process. The COS-STAD project has established 11 minimum standards to be followed by COS developers when planning their projects and by users when deciding whether a COS has been developed using reasonable methods.

Initial Development and Pilot Study Design of Interactive Lecture Demonstrations for ASTRO 101

NASA Astrophysics Data System (ADS)

Schwortz, Andria C.; French, D. A; Gutierrez, Joseph V; Sanchez, Richard L; Slater, Timothy F.; Tatge, Coty

2014-06-01

Interactive lecture demonstrations (ILDs) have repeatedly shown to be effective tools for improving student achievement in the context of learning physics. As a first step toward systematic development of interactive lecture demonstrations in ASTRO 101, the introductory astronomy survey course, a systematic review of education research, describing educational computer simulations (ECSs) reveals that initial development requires a targeted study of how ASTRO 101 students respond to ECSs in the non-science majoring undergraduate lecture setting. In this project we have adopted the process by which ILDs were designed, pilot-tested, and successfully implemented in the context of physics teaching (Sokoloff & Thornton, 1997; Sokoloff & Thornton, 2004). We have designed the initial pilot-test set of ASTRO 101 ILD instructional materials relying heavily on ECSs. Both an instructor’s manual and a preliminary classroom-ready student workbook have been developed, and we are implementing a pilot study to explore their effectiveness in communicating scientific content, and the extent to which they might enhance students’ knowledge of and perception about astronomy and science in general. The study design uses a pre-/post-test quasi-experimental study design measuring students’ normalized gain scores, calculated as per Hake (1998) and Prather (2009), using a slightly modified version of S. Slater’s (2011) Test Of Astronomy STandards TOAST combined with other instruments. The results of this initial study will guide the iterative development of ASTRO 101 ILDs that are intended to both be effective at enhancing student achievement and easy for instructors to successfully implement.

TROUBLE 3: A fault diagnostic expert system for Space Station Freedom's power system

NASA Technical Reports Server (NTRS)

Manner, David B.

1990-01-01

Designing Space Station Freedom has given NASA many opportunities to develop expert systems that automate onboard operations of space based systems. One such development, TROUBLE 3, an expert system that was designed to automate the fault diagnostics of Space Station Freedom's electric power system is described. TROUBLE 3's design is complicated by the fact that Space Station Freedom's power system is evolving and changing. TROUBLE 3 has to be made flexible enough to handle changes with minimal changes to the program. Three types of expert systems were studied: rule-based, set-covering, and model-based. A set-covering approach was selected for TROUBLE 3 because if offered the needed flexibility that was missing from the other approaches. With this flexibility, TROUBLE 3 is not limited to Space Station Freedom applications, it can easily be adapted to handle any diagnostic system.

GATOR: Requirements capturing of telephony features

NASA Technical Reports Server (NTRS)

Dankel, Douglas D., II; Walker, Wayne; Schmalz, Mark

1992-01-01

We are developing a natural language-based, requirements gathering system called GATOR (for the GATherer Of Requirements). GATOR assists in the development of more accurate and complete specifications of new telephony features. GATOR interacts with a feature designer who describes a new feature, set of features, or capability to be implemented. The system aids this individual in the specification process by asking for clarifications when potential ambiguities are present, by identifying potential conflicts with other existing features, and by presenting its understanding of the feature to the designer. Through user interaction with a model of the existing telephony feature set, GATOR constructs a formal representation of the new, 'to be implemented' feature. Ultimately GATOR will produce a requirements document and will maintain an internal representation of this feature to aid in future design and specification. This paper consists of three sections that describe (1) the structure of GATOR, (2) POND, GATOR's internal knowledge representation language, and (3) current research issues.

The Objectives of NASA's Living with a Star Space Environment Testbed

NASA Technical Reports Server (NTRS)

Barth, Janet L.; LaBel, Kenneth A.; Brewer, Dana; Kauffman, Billy; Howard, Regan; Griffin, Geoff; Day, John H. (Technical Monitor)

2001-01-01

NASA is planning to fly a series of Space Environment Testbeds (SET) as part of the Living With A Star (LWS) Program. The goal of the testbeds is to improve and develop capabilities to mitigate and/or accommodate the affects of solar variability in spacecraft and avionics design and operation. This will be accomplished by performing technology validation in space to enable routine operations, characterize technology performance in space, and improve and develop models, guidelines and databases. The anticipated result of the LWS/SET program is improved spacecraft performance, design, and operation for survival of the radiation, spacecraft charging, meteoroid, orbital debris and thermosphere/ionosphere environments. The program calls for a series of NASA Research Announcements (NRAs) to be issued to solicit flight validation experiments, improvement in environment effects models and guidelines, and collateral environment measurements. The selected flight experiments may fly on the SET experiment carriers and flights of opportunity on other commercial and technology missions. This paper presents the status of the project so far, including a description of the types of experiments that are intended to fly on SET-1 and a description of the SET-1 carrier parameters.

HAT DRMs 2013

NASA Technical Reports Server (NTRS)

Drake, Bret G.

2013-01-01

NASA uses a set of Design Reference Missions (DRMs) to help focus capability development activities across the agency The DRMs are intended to show capability needs and represent a set of various implementations The "mission class" context is used to establish temporal priorities and a LIMITED set of DRMs is used to capture driving mission capabilities The DRMs represent a snapshot in time of current thinking, and do not represent all potential future missions The DRMs are generic in nature, with stated assumptions for some supporting capabilities and elements - they do not represent firm requirements SLS/Orion DRMs are being developed and refined as part of the development program for SLS & Orion and are not included in this package.

Criteria for implementing interventions to reduce health inequalities in primary care settings in European regions.

PubMed

Daponte, Antonio; Bernal, Mariola; Bolívar, Julia; Mateo, Inmaculada; Salmi, Louis-Rachid; Barsanti, Sara; Berghmans, Luc; Piznal, Ewelina; Bourgueil, Yann; Marquez, Soledad; González, Ingrid; Carriazo, Ana; Maros-Szabo, Zsuzsanna; Ménival, Solange

2014-12-01

The current social and political context is generating socio-economic inequalities between and within countries, causing and widening health inequalities. The development and implementation of interventions in primary health care (PHC) settings seem unavoidable. Attempts have been made to draw up adequate criteria to guide and evaluate interventions but none for the specific case of PHC. This methodological article aims to contribute to this field by developing and testing a set of criteria for guiding and evaluating real-life interventions to reduce health inequalities in PHC settings in European regions. A literature review, nominal group technique, survey and evaluation template were used to design and test a set of criteria. The questionnaire was answered by professionals in charge of 46 interventions carried out in 12 European countries, and collected detailed information about each intervention. Third-party experts scored the interventions using the set of evaluation criteria proposed. Nine criteria to guide and evaluate interventions were proposed: relevance, appropriateness, applicability, innovation, quality assurance, adequacy of resources, effectiveness in the process, effectiveness in results and mainstreaming. A working definition was drawn up for each one. These criteria were then used to evaluate the interventions identified. The set of criteria drawn up to guide the design, implementation and evaluation of interventions to reduce health inequalities in PHC will be a useful instrument to be applied to interventions under development for culturally, politically and socio-economically diverse PHC contexts throughout Europe. © The Author 2014. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

A Leader's Guide to Mathematics Curriculum Topic Study

ERIC Educational Resources Information Center

Keeley, Page; Mundry, Susan; Tobey, Cheryl Rose; Carroll, Catherine E.

2012-01-01

The Curriculum Topic Study (CTS) process, funded by the National Science Foundation, supports teachers in improving practice by connecting standards and research to curriculum, instruction, and assessment. Designed for facilitators, this guide provides a robust set of professional development tools, templates, and designs to strengthen mathematics…

Biostatistical and medical statistics graduate education

PubMed Central

2014-01-01

The development of graduate education in biostatistics and medical statistics is discussed in the context of training within a medical center setting. The need for medical researchers to employ a wide variety of statistical designs in clinical, genetic, basic science and translational settings justifies the ongoing integration of biostatistical training into medical center educational settings and informs its content. The integration of large data issues are a challenge. PMID:24472088

Complete Development and Implement AFIT/ENG Database Management System. Volume 1.

DTIC Science & Technology

1984-12-01

graphic depiction of the sys - ten specification that identifies inputs, desired outputs, and data transformations. This usually leads to the definition and...DATA-SET-NAME-TLME DRIVE=01,5000,DUI DATA-SET-NAME=BLRM DRIVE=02,5000, DUI DATA-SET- NAbE =CPTY DRIVE=03,5000 ,DUI L-1 DATA-SET-NAME=DAYS DRIVE=-04...DEC), the Form Manageent Sys - tern (FMS). It is designed for ease of formulation and form simulation in order to collect and transmit data in an

Demonstration of a software design and statistical analysis methodology with application to patient outcomes data sets

PubMed Central

Mayo, Charles; Conners, Steve; Warren, Christopher; Miller, Robert; Court, Laurence; Popple, Richard

2013-01-01

Purpose: With emergence of clinical outcomes databases as tools utilized routinely within institutions, comes need for software tools to support automated statistical analysis of these large data sets and intrainstitutional exchange from independent federated databases to support data pooling. In this paper, the authors present a design approach and analysis methodology that addresses both issues. Methods: A software application was constructed to automate analysis of patient outcomes data using a wide range of statistical metrics, by combining use of C#.Net and R code. The accuracy and speed of the code was evaluated using benchmark data sets. Results: The approach provides data needed to evaluate combinations of statistical measurements for ability to identify patterns of interest in the data. Through application of the tools to a benchmark data set for dose-response threshold and to SBRT lung data sets, an algorithm was developed that uses receiver operator characteristic curves to identify a threshold value and combines use of contingency tables, Fisher exact tests, Welch t-tests, and Kolmogorov-Smirnov tests to filter the large data set to identify values demonstrating dose-response. Kullback-Leibler divergences were used to provide additional confirmation. Conclusions: The work demonstrates the viability of the design approach and the software tool for analysis of large data sets. PMID:24320426

Demonstration of a software design and statistical analysis methodology with application to patient outcomes data sets.

PubMed

Mayo, Charles; Conners, Steve; Warren, Christopher; Miller, Robert; Court, Laurence; Popple, Richard

2013-11-01

With emergence of clinical outcomes databases as tools utilized routinely within institutions, comes need for software tools to support automated statistical analysis of these large data sets and intrainstitutional exchange from independent federated databases to support data pooling. In this paper, the authors present a design approach and analysis methodology that addresses both issues. A software application was constructed to automate analysis of patient outcomes data using a wide range of statistical metrics, by combining use of C#.Net and R code. The accuracy and speed of the code was evaluated using benchmark data sets. The approach provides data needed to evaluate combinations of statistical measurements for ability to identify patterns of interest in the data. Through application of the tools to a benchmark data set for dose-response threshold and to SBRT lung data sets, an algorithm was developed that uses receiver operator characteristic curves to identify a threshold value and combines use of contingency tables, Fisher exact tests, Welch t-tests, and Kolmogorov-Smirnov tests to filter the large data set to identify values demonstrating dose-response. Kullback-Leibler divergences were used to provide additional confirmation. The work demonstrates the viability of the design approach and the software tool for analysis of large data sets.

The Effect on Pupils' Science Performance and Problem-Solving Ability through Lego: An Engineering Design-Based Modeling Approach

ERIC Educational Resources Information Center

Li, Yanyan; Huang, Zhinan; Jiang, Menglu; Chang, Ting-Wen

2016-01-01

Incorporating scientific fundamentals via engineering through a design-based methodology has proven to be highly effective for STEM education. Engineering design can be instantiated for learning as they involve mental and physical stimulation and develop practical skills especially in solving problems. Lego bricks, as a set of toys based on design…

From Swampy Lowlands to Giddy Heights: A Case Study of Leadership Development in a Mental Health Setting

ERIC Educational Resources Information Center

Storr, Lorna; Trenchard, Steve

2010-01-01

Purpose: The purpose of this case study is to describe the design and delivery of a leadership programme for a diverse group of clinicians and middle managers within a British mental health organisation. Design/methodology/approach: This paper shows how the course was co-designed between managers, clinicians and higher education, specifically to…

Old as the Hills. Morrow Mountain State Park: An Environmental Education Learning Experience Designed for Grades 5-7.

ERIC Educational Resources Information Center

North Carolina State Dept. of Environment, Health, and Natural Resources, Raleigh. Div. of Parks and Recreation.

This curriculum packet was developed and designed to provide environmental education through a series of hands-on activities for the classroom and the outdoor setting of Morrow Mountain State Park, North Carolina to introduce students to the geology of the Uwharrie Mountains. Designed for grades 5 through 7, the packet meets the established…

Deep Borehole Field Test Requirements and Controlled Assumptions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hardin, Ernest

2015-07-01

This document presents design requirements and controlled assumptions intended for use in the engineering development and testing of: 1) prototype packages for radioactive waste disposal in deep boreholes; 2) a waste package surface handling system; and 3) a subsurface system for emplacing and retrieving packages in deep boreholes. Engineering development and testing is being performed as part of the Deep Borehole Field Test (DBFT; SNL 2014a). This document presents parallel sets of requirements for a waste disposal system and for the DBFT, showing the close relationship. In addition to design, it will also inform planning for drilling, construction, and scientificmore » characterization activities for the DBFT. The information presented here follows typical preparations for engineering design. It includes functional and operating requirements for handling and emplacement/retrieval equipment, waste package design and emplacement requirements, borehole construction requirements, sealing requirements, and performance criteria. Assumptions are included where they could impact engineering design. Design solutions are avoided in the requirements discussion. Deep Borehole Field Test Requirements and Controlled Assumptions July 21, 2015 iv ACKNOWLEDGEMENTS This set of requirements and assumptions has benefited greatly from reviews by Gordon Appel, Geoff Freeze, Kris Kuhlman, Bob MacKinnon, Steve Pye, David Sassani, Dave Sevougian, and Jiann Su.« less

The development of a test methodology for the evaluation of EVA gloves

NASA Technical Reports Server (NTRS)

O'Hara, John M.; Cleland, John; Winfield, Dan

1988-01-01

This paper describes the development of a standardized set of tests designed to assess EVA-gloved hand capabilities in six measurement domains: range of motion, strength, tactile perception, dexterity, fatigue, and comfort. Based upon an assessment of general human-hand functioning and EVA task requirements, several tests within each measurement domain were developed to provide a comprehensive evaluation. All tests were designed to be conducted in a glove box with the bare hand as a baseline and the EVA glove at operating pressure.

Developing design principles for a Virtual Hospice: improving access to care.

PubMed

Taylor, Andrea; French, Tara; Raman, Sneha

2018-03-01

Providing access to hospice services will become increasingly difficult due to the pressures of an ageing population and limited resources. To help address this challenge, a small number of services called Virtual Hospice have been established. This paper presents early-stage design work on a Virtual Hospice to improve access to services provided by a hospice (Highland Hospice) serving a largely remote and rural population in Scotland, UK. The study was structured as a series of Experience Labs with Highland Hospice staff, healthcare professionals and patients. Experience Labs employ a participatory design approach where participants are placed at the centre of the design process, helping to ensure that the resultant service meets their needs. Data from the Experience Labs were analysed using qualitative thematic analysis and design analysis. A number of themes and barriers to accessing Highland Hospice services were identified. In response, an initial set of seven design principles was developed. Design principles are high-level guidelines that are used to improve prioritisation and decision making during the design process by ensuring alignment with research insights. The design principles were piloted with a group of stakeholders and gained positive feedback. The design principles are intended to guide the ongoing development of the Highland Hospice Virtual Hospice. However, the challenges faced by Highland Hospice in delivering services in a largely remote and rural setting are not unique. The design principles, encompassing digital and non-digital guidelines, or the design approach could be applied by other hospices in the UK or overseas. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Science: Grade 7. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Science: Grade 6. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

The Environmental Education Collection: A Review of Resources for Educators. Volume 1.

ERIC Educational Resources Information Center

North American Association for Environmental Education, Troy, OH.

This book is designed to help educators find curricula, multimedia resources, and other educational materials that can enhance the teaching of environmental education in a variety of settings. Curriculum materials included in this compendium were evaluated using a set of guidelines developed by the North American Association for Environmental…

The Impact of Physical Settings on Pre-Schoolers Classroom Organization

ERIC Educational Resources Information Center

Tadjic, Mirko; Martinec, Miroslav; Farago, Amalija

2015-01-01

The physical setting plays an important role in the lives of pre-schoolers and can be an important component of children's experience and development when it is wisely and meaningfully designed. The classroom organization enhances and supports the pre-schooler capability to perform activities himself, initiate and finish tasks, creates the…

Science: Grade 8. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Growing Hope as a Determinant of School Effectiveness

ERIC Educational Resources Information Center

Newell, Ronald J.; Van Ryzin, Mark J.

2007-01-01

What is needed to judge school effectiveness is a means by which schools can be assessed as "cultures" that create sets of relationships, norms of behaviors, and values and obligations that lead to the development of healthy and productive adults. The Hope Study was originally designed to evaluate whether the educational setting would…

Science: Grade 2. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Science: Grade 1. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Science: Kindergarten. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education and Training, Winnipeg.

This guide is one of a set of 10 science guides, each covering a separate grade in Manitoba, together covering kindergarten through grade 9. The guides have been designed to provide a framework for building scientific concepts and developing the learning of process skills. They replace an earlier set of guides dated 1979. Each guide is essentially…

Preparing Early Childhood Practitioners for Work in Multiple Settings.

ERIC Educational Resources Information Center

Roderick, Jessie A.

A number of professional qualities might be developed in a program designed to prepare early childhood teachers to function in multiple settings. Solving problems, assessing situations, communicating with a range of people, and being flexible and innovative are such qualities. But one can also view prepararing educators to function in multiple…

A Student Experiment Method for Learning the Basics of Embedded Software Technologies Including Hardware/Software Co-design

NASA Astrophysics Data System (ADS)

Kambe, Hidetoshi; Mitsui, Hiroyasu; Endo, Satoshi; Koizumi, Hisao

The applications of embedded system technologies have spread widely in various products, such as home appliances, cellular phones, automobiles, industrial machines and so on. Due to intensified competition, embedded software has expanded its role in realizing sophisticated functions, and new development methods like a hardware/software (HW/SW) co-design for uniting HW and SW development have been researched. The shortfall of embedded SW engineers was estimated to be approximately 99,000 in the year 2006, in Japan. Embedded SW engineers should understand HW technologies and system architecture design as well as SW technologies. However, a few universities offer this kind of education systematically. We propose a student experiment method for learning the basics of embedded system development, which includes a set of experiments for developing embedded SW, developing embedded HW and experiencing HW/SW co-design. The co-design experiment helps students learn about the basics of embedded system architecture design and the flow of designing actual HW and SW modules. We developed these experiments and evaluated them.

Intersubjective decision-making for computer-aided forging technology design

NASA Astrophysics Data System (ADS)

Kanyukov, S. I.; Konovalov, A. V.; Muizemnek, O. Yu.

2017-12-01

We propose a concept of intersubjective decision-making for problems of open-die forging technology design. The intersubjective decisions are chosen from a set of feasible decisions using the fundamentals of the decision-making theory in fuzzy environment according to the Bellman-Zadeh scheme. We consider the formalization of subjective goals and the choice of membership functions for the decisions depending on subjective goals. We study the arrangement of these functions into an intersubjective membership function. The function is constructed for a resulting decision, which is chosen from a set of feasible decisions. The choice of the final intersubjective decision is discussed. All the issues are exemplified by a specific technological problem. The considered concept of solving technological problems under conditions of fuzzy goals allows one to choose the most efficient decisions from a set of feasible ones. These decisions correspond to the stated goals. The concept allows one to reduce human participation in automated design. This concept can be used to develop algorithms and design programs for forging numerous types of forged parts.

Development of a Direct Spectrophotometric and Chemometric Method for Determining Food Dye Concentrations.

PubMed

Arroz, Erin; Jordan, Michael; Dumancas, Gerard G

2017-07-01

An ultraviolet visible (UV-Vis) spectrophotometric and partial least squares (PLS) chemometric method was developed for the simultaneous determination of erythrosine B (red), Brilliant Blue, and tartrazine (yellow) dyes. A training set (n = 64) was generated using a full factorial design and its accuracy was tested in a test set (n = 13) using a Box-Behnken design. The test set garnered a root mean square error (RMSE) of 1.79 × 10 -7 for blue, 4.59 × 10 -7 for red, and 1.13 × 10 -6 for yellow dyes. The relatively small RMSE suggests only a small difference between predicted versus measured concentrations, demonstrating the accuracy of our model. The relative error of prediction (REP) for the test set were 11.73%, 19.52%, 19.38%, for blue, red, and yellow dyes, respectively. A comparable overlay between the actual candy samples and their replicated synthetic spectra were also obtained indicating the model as a potentially accurate method for determining concentrations of dyes in food samples.

Automated design of degenerate codon libraries.

PubMed

Mena, Marco A; Daugherty, Patrick S

2005-12-01

Degenerate codon libraries are frequently used in protein engineering and evolution studies but are often limited to targeting a small number of positions to adequately limit the search space. To mitigate this, codon degeneracy can be limited using heuristics or previous knowledge of the targeted positions. To automate design of libraries given a set of amino acid sequences, an algorithm (LibDesign) was developed that generates a set of possible degenerate codon libraries, their resulting size, and their score relative to a user-defined scoring function. A gene library of a specified size can then be constructed that is representative of the given amino acid distribution or that includes specific sequences or combinations thereof. LibDesign provides a new tool for automated design of high-quality protein libraries that more effectively harness existing sequence-structure information derived from multiple sequence alignment or computational protein design data.

Qualitative models and experimental investigation of chaotic NOR gates and set/reset flip-flops

NASA Astrophysics Data System (ADS)

Rahman, Aminur; Jordan, Ian; Blackmore, Denis

2018-01-01

It has been observed through experiments and SPICE simulations that logical circuits based upon Chua's circuit exhibit complex dynamical behaviour. This behaviour can be used to design analogues of more complex logic families and some properties can be exploited for electronics applications. Some of these circuits have been modelled as systems of ordinary differential equations. However, as the number of components in newer circuits increases so does the complexity. This renders continuous dynamical systems models impractical and necessitates new modelling techniques. In recent years, some discrete dynamical models have been developed using various simplifying assumptions. To create a robust modelling framework for chaotic logical circuits, we developed both deterministic and stochastic discrete dynamical models, which exploit the natural recurrence behaviour, for two chaotic NOR gates and a chaotic set/reset flip-flop. This work presents a complete applied mathematical investigation of logical circuits. Experiments on our own designs of the above circuits are modelled and the models are rigorously analysed and simulated showing surprisingly close qualitative agreement with the experiments. Furthermore, the models are designed to accommodate dynamics of similarly designed circuits. This will allow researchers to develop ever more complex chaotic logical circuits with a simple modelling framework.

Qualitative models and experimental investigation of chaotic NOR gates and set/reset flip-flops.

PubMed

Rahman, Aminur; Jordan, Ian; Blackmore, Denis

2018-01-01

It has been observed through experiments and SPICE simulations that logical circuits based upon Chua's circuit exhibit complex dynamical behaviour. This behaviour can be used to design analogues of more complex logic families and some properties can be exploited for electronics applications. Some of these circuits have been modelled as systems of ordinary differential equations. However, as the number of components in newer circuits increases so does the complexity. This renders continuous dynamical systems models impractical and necessitates new modelling techniques. In recent years, some discrete dynamical models have been developed using various simplifying assumptions. To create a robust modelling framework for chaotic logical circuits, we developed both deterministic and stochastic discrete dynamical models, which exploit the natural recurrence behaviour, for two chaotic NOR gates and a chaotic set/reset flip-flop. This work presents a complete applied mathematical investigation of logical circuits. Experiments on our own designs of the above circuits are modelled and the models are rigorously analysed and simulated showing surprisingly close qualitative agreement with the experiments. Furthermore, the models are designed to accommodate dynamics of similarly designed circuits. This will allow researchers to develop ever more complex chaotic logical circuits with a simple modelling framework.

Simulation environment based on the Universal Verification Methodology

NASA Astrophysics Data System (ADS)

Fiergolski, A.

2017-01-01

Universal Verification Methodology (UVM) is a standardized approach of verifying integrated circuit designs, targeting a Coverage-Driven Verification (CDV). It combines automatic test generation, self-checking testbenches, and coverage metrics to indicate progress in the design verification. The flow of the CDV differs from the traditional directed-testing approach. With the CDV, a testbench developer, by setting the verification goals, starts with an structured plan. Those goals are targeted further by a developed testbench, which generates legal stimuli and sends them to a device under test (DUT). The progress is measured by coverage monitors added to the simulation environment. In this way, the non-exercised functionality can be identified. Moreover, the additional scoreboards indicate undesired DUT behaviour. Such verification environments were developed for three recent ASIC and FPGA projects which have successfully implemented the new work-flow: (1) the CLICpix2 65 nm CMOS hybrid pixel readout ASIC design; (2) the C3PD 180 nm HV-CMOS active sensor ASIC design; (3) the FPGA-based DAQ system of the CLICpix chip. This paper, based on the experience from the above projects, introduces briefly UVM and presents a set of tips and advices applicable at different stages of the verification process-cycle.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roger Lew; Ronald L. Boring; Thomas A. Ulrich

Operators of critical processes, such as nuclear power production, must contend with highly complex systems, procedures, and regulations. Developing human-machine interfaces (HMIs) that better support operators is a high priority for ensuring the safe and reliable operation of critical processes. Human factors engineering (HFE) provides a rich and mature set of tools for evaluating the performance of HMIs, but the set of tools for developing and designing HMIs is still in its infancy. Here we propose that Microsoft Windows Presentation Foundation (WPF) is well suited for many roles in the research and development of HMIs for process control.

Fan and pump noise control

NASA Technical Reports Server (NTRS)

Misoda, J.; Magliozzi, B.

1973-01-01

The development is described of improved, low noise level fan and pump concepts for the space shuttle. In addition, a set of noise design criteria for small fans and pumps was derived. The concepts and criteria were created by obtaining Apollo hardware test data to correlate and modify existing noise estimating procedures. A set of space shuttle selection criteria was used to determine preliminary fan and pump concepts. These concepts were tested and modified to obtain noise sources and characteristics which yield the design criteria and quiet, efficient space shuttle fan and pump concepts.

The National Institutes of Health's Biomedical Translational Research Information System (BTRIS): Design, Contents, Functionality and Experience to Date

PubMed Central

Cimino, James J.; Ayres, Elaine J.; Remennik, Lyubov; Rath, Sachi; Freedman, Robert; Beri, Andrea; Chen, Yang; Huser, Vojtech

2013-01-01

The US National Institutes of Health (NIH) has developed the Biomedical Translational Research Information System (BTRIS) to support researchers’ access to translational and clinical data. BTRIS includes a data repository, a set of programs for loading data from NIH electronic health records and research data management systems, an ontology for coding the disparate data with a single terminology, and a set of user interface tools that provide access to identified data from individual research studies and data across all studies from which individually identifiable data have been removed. This paper reports on unique design elements of the system, progress to date and user experience after five years of development and operation. PMID:24262893

Multispectral system analysis through modeling and simulation

NASA Technical Reports Server (NTRS)

Malila, W. A.; Gleason, J. M.; Cicone, R. C.

1977-01-01

The design and development of multispectral remote sensor systems and associated information extraction techniques should be optimized under the physical and economic constraints encountered and yet be effective over a wide range of scene and environmental conditions. Direct measurement of the full range of conditions to be encountered can be difficult, time consuming, and costly. Simulation of multispectral data by modeling scene, atmosphere, sensor, and data classifier characteristics is set forth as a viable alternative, particularly when coupled with limited sets of empirical measurements. A multispectral system modeling capability is described. Use of the model is illustrated for several applications - interpretation of remotely sensed data from agricultural and forest scenes, evaluating atmospheric effects in Landsat data, examining system design and operational configuration, and development of information extraction techniques.

Multispectral system analysis through modeling and simulation

NASA Technical Reports Server (NTRS)

Malila, W. A.; Gleason, J. M.; Cicone, R. C.

1977-01-01

The design and development of multispectral remote sensor systems and associated information extraction techniques should be optimized under the physical and economic constraints encountered and yet be effective over a wide range of scene and environmental conditions. Direct measurement of the full range of conditions to be encountered can be difficult, time consuming, and costly. Simulation of multispectral data by modeling scene, atmosphere, sensor, and data classifier characteristics is set forth as a viable alternative, particularly when coupled with limited sets of empirical measurements. A multispectral system modeling capability is described. Use of the model is illustrated for several applications - interpretation of remotely sensed data from agricultural and forest scenes, evaluating atmospheric effects in LANDSAT data, examining system design and operational configuration, and development of information extraction techniques.

Design and development status of ETS-7, an RVD and space robot experiment satellite

NASA Technical Reports Server (NTRS)

Oda, M.; Inagaki, T.; Nishida, M.; Kibe, K.; Yamagata, F.

1994-01-01

ETS-7 (Engineering Test Satellite #7) is an experimental satellite for the in-orbit experiment of the Rendezvous Docking (RVD) and the space robot (RBT) technologies. ETS-7 is a set of two satellites, a chaser satellite and a target satellite. Both satellites will be launched together by NASDA's H-2 rocket into a low earth orbit. Development of ETS-7 started in 1990. Basic design and EM (Engineering Model) development are in progress now in 1994. The satellite will be launched in mid 1997 and the above in-orbit experiments will be conducted for 1.5 years. Design of ETS-7 RBT experiment system and development status are described in this paper.

Mixed oxidizer hybrid propulsion system optimization under uncertainty using applied response surface methodology and Monte Carlo simulation

NASA Astrophysics Data System (ADS)

Whitehead, James Joshua

The analysis documented herein provides an integrated approach for the conduct of optimization under uncertainty (OUU) using Monte Carlo Simulation (MCS) techniques coupled with response surface-based methods for characterization of mixture-dependent variables. This novel methodology provides an innovative means of conducting optimization studies under uncertainty in propulsion system design. Analytic inputs are based upon empirical regression rate information obtained from design of experiments (DOE) mixture studies utilizing a mixed oxidizer hybrid rocket concept. Hybrid fuel regression rate was selected as the target response variable for optimization under uncertainty, with maximization of regression rate chosen as the driving objective. Characteristic operational conditions and propellant mixture compositions from experimental efforts conducted during previous foundational work were combined with elemental uncertainty estimates as input variables. Response surfaces for mixture-dependent variables and their associated uncertainty levels were developed using quadratic response equations incorporating single and two-factor interactions. These analysis inputs, response surface equations and associated uncertainty contributions were applied to a probabilistic MCS to develop dispersed regression rates as a function of operational and mixture input conditions within design space. Illustrative case scenarios were developed and assessed using this analytic approach including fully and partially constrained operational condition sets over all of design mixture space. In addition, optimization sets were performed across an operationally representative region in operational space and across all investigated mixture combinations. These scenarios were selected as representative examples relevant to propulsion system optimization, particularly for hybrid and solid rocket platforms. Ternary diagrams, including contour and surface plots, were developed and utilized to aid in visualization. The concept of Expanded-Durov diagrams was also adopted and adapted to this study to aid in visualization of uncertainty bounds. Regions of maximum regression rate and associated uncertainties were determined for each set of case scenarios. Application of response surface methodology coupled with probabilistic-based MCS allowed for flexible and comprehensive interrogation of mixture and operating design space during optimization cases. Analyses were also conducted to assess sensitivity of uncertainty to variations in key elemental uncertainty estimates. The methodology developed during this research provides an innovative optimization tool for future propulsion design efforts.

A Distributed Control System Prototyping Environment to Support Control Room Modernization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lew, Roger Thomas; Boring, Ronald Laurids; Ulrich, Thomas Anthony

Operators of critical processes, such as nuclear power production, must contend with highly complex systems, procedures, and regulations. Developing human-machine interfaces (HMIs) that better support operators is a high priority for ensuring the safe and reliable operation of critical processes. Human factors engineering (HFE) provides a rich and mature set of tools for evaluating the performance of HMIs, however the set of tools for developing and designing HMIs is still in its infancy. Here we propose a rapid prototyping approach for integrating proposed HMIs into their native environments before a design is finalized. This approach allows researchers and developers tomore » test design ideas and eliminate design flaws prior to fully developing the new system. We illustrate this approach with four prototype designs developed using Microsoft’s Windows Presentation Foundation (WPF). One example is integrated into a microworld environment to test the functionality of the design and identify the optimal level of automation for a new system in a nuclear power plant. The other three examples are integrated into a full-scale, glasstop digital simulator of a nuclear power plant. One example demonstrates the capabilities of next generation control concepts; another aims to expand the current state of the art; lastly, an HMI prototype was developed as a test platform for a new control system currently in development at U.S. nuclear power plants. WPF possesses several characteristics that make it well suited to HMI design. It provides a tremendous amount of flexibility, agility, robustness, and extensibility. Distributed control system (DCS) specific environments tend to focus on the safety and reliability requirements for real-world interfaces and consequently have less emphasis on providing functionality to support novel interaction paradigms. Because of WPF’s large user-base, Microsoft can provide an extremely mature tool. Within process control applications,WPF is platform independent and can communicate with popular full-scope process control simulator vendor plant models and DCS platforms.« less

Use of a design challenge to develop postural support devices for intermediate wheelchair users

PubMed Central

Tanuku, Deepti; Moller, Nathaniel C.

2017-01-01

The provision of an appropriate wheelchair, one that provides proper fit and postural support, promotes wheelchair users’ physical health and quality of life. Many wheelchair users have postural difficulties, requiring supplemental postural support devices for added trunk support. However, in many low- and middle-income settings, postural support devices are inaccessible, inappropriate or unaffordable. This article describes the use of the design challenge model, informed by a design thinking approach, to catalyse the development of an affordable, simple and robust postural support device for low- and middle-income countries. The article also illustrates how not-for-profit organisations can utilise design thinking and, in particular, the design challenge model to successfully support the development of innovative solutions to product or process challenges. PMID:28936418

A SNP genotyping array for hexaploid oat

USDA-ARS?s Scientific Manuscript database

Recognizing a need in cultivated hexaploid oat (Avena sativa L.) for a reliable set of reference SNPs, we have developed a 6K BeadChip design containing 257 Infinium I and 5,486 Infinium II designs corresponding to 5,743 SNPs. Of those, 4,975 SNPs yielded successful assays after array manufacturing...

Man-Machine Integrated Design and Analysis System (MIDAS): Functional Overview

NASA Technical Reports Server (NTRS)

Corker, Kevin; Neukom, Christian

1998-01-01

Included in the series of screen print-outs illustrates the structure and function of the Man-Machine Integrated Design and Analysis System (MIDAS). Views into the use of the system and editors are featured. The use-case in this set of graphs includes the development of a simulation scenario.

Space law information system design, phase 2

NASA Technical Reports Server (NTRS)

Morenoff, J.; Roth, D. L.; Singleton, J. W.

1973-01-01

Design alternatives were defined for the implementation of a Space Law Information System for the Office of the General Counsel, NASA. A thesaurus of space law terms was developed and a selected document sample indexed on the basis of that thesaurus. Abstracts were also prepared for the sample document set.

Usability Engineering Can Change Our Thinking

ERIC Educational Resources Information Center

Flowers, Jim

2014-01-01

Technology and engineering education and its predecessors have a long history of being effective programs for helping students learn about technology and technological design. Students are often asked to solve design challenges, develop product ideas, and create models or prototypes for products. They do not often set up tests with product users…

Exploring Engaging Gamification Mechanics in Massive Online Open Courses

ERIC Educational Resources Information Center

Chang, Jen-Wei; Wei, Hung-Yu

2016-01-01

Massive open online courses (MOOCs) have developed rapidly and become tremendously popular because of their plentiful gamification designs, such as reputation points, rewards, and goal setting. Although previous studies have mentioned a broad range of gamification designs that might influence MOOC learner engagement, most gamified MOOCs fail to…

Good Apple Homework Helper.

ERIC Educational Resources Information Center

Cipriano, Jeri S.

This book, designed for students in grades 4 to 6, provides advice to help them do homework independently and successfully. Part 1, "Developing Good Habits," presents exercises and tips on organization and time management, including a self-inventory of homework habits, assistance in goal setting, and designing a personal schedule. Part 2, "Getting…

Development of performance specifications for collision avoidance systems for lane change crashes. Task 6, interim report : testbed systems design and associated facilities

DOT National Transportation Integrated Search

2001-11-01

This report documents the design of an on-road testbed vehicle. The purposes of this testbed are twofold: (1) Establish a foundation for estimating lane change collision avoidance effectiveness, and (2) provide information pertinent to setting perfor...

Assistive Technology Instruction within a Continuously Evolving Technology Environment

ERIC Educational Resources Information Center

Peterson-Karlan, George R.

2015-01-01

The movement toward greater availability of online education in the university setting creates challenges for design, development, and implementation of online courses, particularly those focused on the educational use of technology as content. This article is structured around a central theme of designing and implementing hybrid online courses…

Mixed Methods in Intervention Research: Theory to Adaptation

ERIC Educational Resources Information Center

Nastasi, Bonnie K.; Hitchcock, John; Sarkar, Sreeroopa; Burkholder, Gary; Varjas, Kristen; Jayasena, Asoka

2007-01-01

The purpose of this article is to demonstrate the application of mixed methods research designs to multiyear programmatic research and development projects whose goals include integration of cultural specificity when generating or translating evidence-based practices. The authors propose a set of five mixed methods designs related to different…

Translating Vision into Design: A Method for Conceptual Design Development

NASA Technical Reports Server (NTRS)

Carpenter, Joyce E.

2003-01-01

One of the most challenging tasks for engineers is the definition of design solutions that will satisfy high-level strategic visions and objectives. Even more challenging is the need to demonstrate how a particular design solution supports the high-level vision. This paper describes a process and set of system engineering tools that have been used at the Johnson Space Center to analyze and decompose high-level objectives for future human missions into design requirements that can be used to develop alternative concepts for vehicles, habitats, and other systems. Analysis and design studies of alternative concepts and approaches are used to develop recommendations for strategic investments in research and technology that support the NASA Integrated Space Plan. In addition to a description of system engineering tools, this paper includes a discussion of collaborative design practices for human exploration mission architecture studies used at the Johnson Space Center.

Shape Optimization by Bayesian-Validated Computer-Simulation Surrogates

NASA Technical Reports Server (NTRS)

Patera, Anthony T.

1997-01-01

A nonparametric-validated, surrogate approach to optimization has been applied to the computational optimization of eddy-promoter heat exchangers and to the experimental optimization of a multielement airfoil. In addition to the baseline surrogate framework, a surrogate-Pareto framework has been applied to the two-criteria, eddy-promoter design problem. The Pareto analysis improves the predictability of the surrogate results, preserves generality, and provides a means to rapidly determine design trade-offs. Significant contributions have been made in the geometric description used for the eddy-promoter inclusions as well as to the surrogate framework itself. A level-set based, geometric description has been developed to define the shape of the eddy-promoter inclusions. The level-set technique allows for topology changes (from single-body,eddy-promoter configurations to two-body configurations) without requiring any additional logic. The continuity of the output responses for input variations that cross the boundary between topologies has been demonstrated. Input-output continuity is required for the straightforward application of surrogate techniques in which simplified, interpolative models are fitted through a construction set of data. The surrogate framework developed previously has been extended in a number of ways. First, the formulation for a general, two-output, two-performance metric problem is presented. Surrogates are constructed and validated for the outputs. The performance metrics can be functions of both outputs, as well as explicitly of the inputs, and serve to characterize the design preferences. By segregating the outputs and the performance metrics, an additional level of flexibility is provided to the designer. The validated outputs can be used in future design studies and the error estimates provided by the output validation step still apply, and require no additional appeals to the expensive analysis. Second, a candidate-based a posteriori error analysis capability has been developed which provides probabilistic error estimates on the true performance for a design randomly selected near the surrogate-predicted optimal design.

A rigorous approach to self-checking programming

NASA Technical Reports Server (NTRS)

Hua, Kien A.; Abraham, Jacob A.

1986-01-01

Self-checking programming is shown to be an effective concurrent error detection technique. The reliability of a self-checking program however relies on the quality of its assertion statements. A self-checking program written without formal guidelines could provide a poor coverage of the errors. A constructive technique for self-checking programming is presented. A Structured Program Design Language (SPDL) suitable for self-checking software development is defined. A set of formal rules, was also developed, that allows the transfromation of SPDL designs into self-checking designs to be done in a systematic manner.

Iterative User-Centered Design of a Next Generation Patient Monitoring System for Emergency Medical Response

PubMed Central

Gao, Tia; Kim, Matthew I.; White, David; Alm, Alexander M.

2006-01-01

We have developed a system for real-time patient monitoring during large-scale disasters. Our system is designed with scalable algorithms to monitor large numbers of patients, an intuitive interface to support the overwhelmed responders, and ad-hoc mesh networking capabilities to maintain connectivity to patients in the chaotic settings. This paper describes an iterative approach to user-centered design adopted to guide development of our system. This system is a part of the Advanced Health and Disaster Aid Network (AID-N) architecture. PMID:17238348

A software development and evolution model based on decision-making

NASA Technical Reports Server (NTRS)

Wild, J. Christian; Dong, Jinghuan; Maly, Kurt

1991-01-01

Design is a complex activity whose purpose is to construct an artifact which satisfies a set of constraints and requirements. However the design process is not well understood. The software design and evolution process is the focus of interest, and a three dimensional software development space organized around a decision-making paradigm is presented. An initial instantiation of this model called 3DPM(sub p) which was partly implemented, is presented. Discussion of the use of this model in software reuse and process management is given.

Role of Clinical Education Experiences on Athletic Training Students' Development of Professional Commitment

ERIC Educational Resources Information Center

Mazerolle, Stephanie M.; Dodge, Thomas

2015-01-01

Context: Limited evidence exists on the role clinical education can play in the development of athletic training student commitment for the profession. Objective: Investigating the role clinical education experiences play on the development of passion for athletic training. Design: Exploratory qualitative study. Setting: Athletic training…

[Effectiveness of a self-management program using goal setting based on a G-AP for patients after a stroke].

PubMed

Park, Min Gyeong; Ha, Yeongmi

2014-10-01

This study was conducted to develop a self-management program using goal setting for patients after a stroke. The program was based on a theory-based Goal setting and Action Planning framework (G-AP), and the effectiveness of the program was examined. A non-equivalent control group pretest-posttest design was used. The experimental group (n=30) received the self-management program using goal setting based on the G-AP over 7 weeks. The education was delivered individually with a specifically designed stroke workbook. The control group (n=30) received only patient information leaflets about stroke. There were significant differences between the two groups. Stroke knowledge, self-efficacy, and health behavior compliance were significantly higher (all p<.001), and hospital anxiety (p<.001) and depression (p<.001) were significantly lower in the experimental group compared to the control group. This self-management program using goal setting based on a G-AP was found to be useful and beneficial for patients in stroke rehabilitation settings.

Introduction to the application of QbD principles for the development of monoclonal antibodies.

PubMed

Finkler, Christof; Krummen, Lynne

2016-09-01

Quality by Design (QbD) is a global regulatory initiative with the goal of enhancing pharmaceutical development through the proactive design of pharmaceutical manufacturing process and controls to consistently deliver the intended performance of the product. The principles of pharmaceutical development relevant to QbD are described in the ICH guidance documents (ICHQ8-11). An integrated set of risk assessments and their related elements developed at Roche/Genentech were designed to provide an overview of product and process knowledge for the production of a recombinant monoclonal antibody. This chapter introduces a publication series on the application of Quality by Design for biopharmaceuticals, with a focus on the development of recombinant monoclonal antibodies. The development of and overview on the QbD concept applied by Roche and Genentech is described and essential QbD elements are presented. Copyright © 2016 International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

A Bayesian-frequentist two-stage single-arm phase II clinical trial design.

PubMed

Dong, Gaohong; Shih, Weichung Joe; Moore, Dirk; Quan, Hui; Marcella, Stephen

2012-08-30

It is well-known that both frequentist and Bayesian clinical trial designs have their own advantages and disadvantages. To have better properties inherited from these two types of designs, we developed a Bayesian-frequentist two-stage single-arm phase II clinical trial design. This design allows both early acceptance and rejection of the null hypothesis ( H(0) ). The measures (for example probability of trial early termination, expected sample size, etc.) of the design properties under both frequentist and Bayesian settings are derived. Moreover, under the Bayesian setting, the upper and lower boundaries are determined with predictive probability of trial success outcome. Given a beta prior and a sample size for stage I, based on the marginal distribution of the responses at stage I, we derived Bayesian Type I and Type II error rates. By controlling both frequentist and Bayesian error rates, the Bayesian-frequentist two-stage design has special features compared with other two-stage designs. Copyright © 2012 John Wiley & Sons, Ltd.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radojcic, Riko; Nowak, Matt; Nakamoto, Mark

The status of the development of a Design-for-Stress simulation flow that captures the stress effects in packaged 3D-stacked Si products like integrated circuits (ICs) using advanced via-middle Through Si Via technology is outlined. The next set of challenges required to proliferate the methodology and to deploy it for making and dispositioning real Si product decisions are described here. These include the adoption and support of a Process Design Kit (PDK) that includes the relevant material properties, the development of stress simulation methodologies that operate at higher levels of abstraction in a design flow, and the development and adoption of suitablemore » models required to make real product reliability decisions.« less

Innovations in compact stellarator coil design

NASA Astrophysics Data System (ADS)

Pomphrey, N.; Berry, L.; Boozer, A.; Brooks, A.; Hatcher, R. E.; Hirshman, S. P.; Ku, L.-P.; Miner, W. H.; Mynick, H. E.; Reiersen, W.; Strickler, D. J.; Valanju, P. M.

2001-03-01

Experimental devices for the study of the physics of high beta (β gtrsim 4%), low aspect ratio (A lesssim 4.5) stellarator plasmas require coils that will produce plasmas satisfying a set of physics goals, provide experimental flexibility and be practical to construct. In the course of designing a flexible coil set for the National Compact Stellarator Experiment, several innovations have been made that may be useful in future stellarator design efforts. These include: the use of singular value decomposition methods for obtaining families of smooth current potentials on distant coil winding surfaces from which low current density solutions may be identified; the use of a control matrix method for identifying which few of the many detailed elements of a stellarator boundary must be targeted if a coil set is to provide fields to control the essential physics of the plasma; the use of a genetic algorithm for choosing an optimal set of discrete coils from a continuum of potential contours; the evaluation of alternate coil topologies for balancing the trade-off between physics objectives and engineering constraints; the development of a new coil optimization code for designing modular coils and the identification of a `natural' basis for describing current sheet distributions.

Statistical plant set estimation using Schroeder-phased multisinusoidal input design

NASA Technical Reports Server (NTRS)

Bayard, D. S.

1992-01-01

A frequency domain method is developed for plant set estimation. The estimation of a plant 'set' rather than a point estimate is required to support many methods of modern robust control design. The approach here is based on using a Schroeder-phased multisinusoid input design which has the special property of placing input energy only at the discrete frequency points used in the computation. A detailed analysis of the statistical properties of the frequency domain estimator is given, leading to exact expressions for the probability distribution of the estimation error, and many important properties. It is shown that, for any nominal parametric plant estimate, one can use these results to construct an overbound on the additive uncertainty to any prescribed statistical confidence. The 'soft' bound thus obtained can be used to replace 'hard' bounds presently used in many robust control analysis and synthesis methods.

A service concept and tools to improve maternal and newborn health in Nigeria and Uganda.

PubMed

Salgado, Mariana; Wendland, Melanie; Rodriguez, Damaris; Bohren, Meghan A; Oladapo, Olufemi T; Ojelade, Olubunmi A; Mugerwa, Kidza; Fawole, Bukola

2017-12-01

The "Better Outcomes in Labor Difficulty" (BOLD) project used a service design process to design a set of tools to improve quality of care during childbirth by strengthening linkages between communities and health facilities in Nigeria and Uganda. This paper describes the Passport to Safer Birth concept and the tools developed as a result. Service design methods were used to identify facilitators and barriers to quality care, and to develop human-centered solutions. The service design process had three phases: Research for Design, Concept Design, and Detail Design, undertaken in eight hospitals and catchment communities. The service concept "Better Beginnings" comprises three tools. The "Pregnancy Purse" provides educational information to women throughout pregnancy. The "Birth Board" is a visual communication tool that presents the labor and childbirth process. The "Family Pass" is a set of wearable passes for the woman and her supporter to facilitate communication of care preferences. The Better Beginnings service concept and tools form the basis for the promotion of access to information and knowledge acquisition, and could improve communication between the healthcare provider, the woman, and her family during childbirth. © 2017 International Federation of Gynecology and Obstetrics. The World Health Organization retains copyright and all other rights in the manuscript of this article as submitted for publication.

Design of Phase II Non-inferiority Trials.

PubMed

Jung, Sin-Ho

2017-09-01

With the development of inexpensive treatment regimens and less invasive surgical procedures, we are confronted with non-inferiority study objectives. A non-inferiority phase III trial requires a roughly four times larger sample size than that of a similar standard superiority trial. Because of the large required sample size, we often face feasibility issues to open a non-inferiority trial. Furthermore, due to lack of phase II non-inferiority trial design methods, we do not have an opportunity to investigate the efficacy of the experimental therapy through a phase II trial. As a result, we often fail to open a non-inferiority phase III trial and a large number of non-inferiority clinical questions still remain unanswered. In this paper, we want to develop some designs for non-inferiority randomized phase II trials with feasible sample sizes. At first, we review a design method for non-inferiority phase III trials. Subsequently, we propose three different designs for non-inferiority phase II trials that can be used under different settings. Each method is demonstrated with examples. Each of the proposed design methods is shown to require a reasonable sample size for non-inferiority phase II trials. The three different non-inferiority phase II trial designs are used under different settings, but require similar sample sizes that are typical for phase II trials.

Colour and inclusivity: a visual communication design project with older people.

PubMed

da Silva, Fernando Moreira

2012-01-01

In an ideal world, inclusive products and services would be the standard and not the exception. This paper presents a systematic approach to an overlap between Visual Communication Design, Printed Colour and Inclusive Design, for older people, with the aim to develop of a set of research-based ageing and ergonomics-centred communication design guidelines and recommendations for printed material (analogical displays). The approach included an initial extensive literature review in the area of colour, older people and ergonomics issues and vision common diseases, communication design. The second phase was the implementation of an experiment to measure the different colour experiences of the participants in two sample groups (one in UK and another one in Portugal), using printed material, to find out the colours one should use in analogical communication material, being aware of the colour contrast importance (foreground versus background) and the difficulties experienced by older people to read and understand lettering, signs. As main contribution of this research project, we developed a set of guidelines and recommendations based on the reviewed literature and the sample groups' findings, trying to demonstrate the importance of these guidelines when conceiving a new communicational design project in a way this project will achieve vision comfort and understandability, especially for older people, in an inclusive design perspective.

Seal material development test program

NASA Technical Reports Server (NTRS)

1971-01-01

A program designed to characterize an experimental fluoroelastomer material designated AF-E-124D, is examined. Tests conducted include liquid nitrogen load compression tests, flexure tests and valve seal tests, ambient and elevated temperature compression set tests, and cleaning and flushing fluid exposure tests. The results of these tests indicate the AF-E-124D is a good choice for a cryogenic seal, since it exhibits good low temperature sealing characteristics and resistance to permanent set. The status of this material as an experimental fluorelastomer is stressed and recommended. Activity includes definition and control of critical processing to ensure consistent material properties. Design, fabrication and test of this and other materials is recommended in valve and static seal applications.

Representing the work of medical protocols for organizational simulation.

PubMed Central

Fridsma, D. B.

1998-01-01

Developing and implementing patient care protocols within a specific organizational setting requires knowledge of the protocol, the organization, and the way in which the organization does its work. Computer-based simulation tools have been used in many industries to provide managers with prospective insight into problems of work process and organization design mismatch. Many of these simulation tools are designed for well-understood routine work processes in which there are few contingent tasks. In this paper, we describe theoretic that make it possible to simulate medical protocols using an information-processing theory framework. These simulations will allow medical administrators to test different protocol and organizational designs before actually using them within a particular clinical setting. PMID:9929231

Designed tools for analysis of lithography patterns and nanostructures

NASA Astrophysics Data System (ADS)

Dervillé, Alexandre; Baderot, Julien; Bernard, Guilhem; Foucher, Johann; Grönqvist, Hanna; Labrosse, Aurélien; Martinez, Sergio; Zimmermann, Yann

2017-03-01

We introduce a set of designed tools for the analysis of lithography patterns and nano structures. The classical metrological analysis of these objects has the drawbacks of being time consuming, requiring manual tuning and lacking robustness and user friendliness. With the goal of improving the current situation, we propose new image processing tools at different levels: semi automatic, automatic and machine-learning enhanced tools. The complete set of tools has been integrated into a software platform designed to transform the lab into a virtual fab. The underlying idea is to master nano processes at the research and development level by accelerating the access to knowledge and hence speed up the implementation in product lines.

Design of a modular digital computer system, CDRL no. D001, final design plan

NASA Technical Reports Server (NTRS)

Easton, R. A.

1975-01-01

The engineering breadboard implementation for the CDRL no. D001 modular digital computer system developed during design of the logic system was documented. This effort followed the architecture study completed and documented previously, and was intended to verify the concepts of a fault tolerant, automatically reconfigurable, modular version of the computer system conceived during the architecture study. The system has a microprogrammed 32 bit word length, general register architecture and an instruction set consisting of a subset of the IBM System 360 instruction set plus additional fault tolerance firmware. The following areas were covered: breadboard packaging, central control element, central processing element, memory, input/output processor, and maintenance/status panel and electronics.

Novel method to construct large-scale design space in lubrication process utilizing Bayesian estimation based on a small-scale design-of-experiment and small sets of large-scale manufacturing data.

PubMed

Maeda, Jin; Suzuki, Tatsuya; Takayama, Kozo

2012-12-01

A large-scale design space was constructed using a Bayesian estimation method with a small-scale design of experiments (DoE) and small sets of large-scale manufacturing data without enforcing a large-scale DoE. The small-scale DoE was conducted using various Froude numbers (X(1)) and blending times (X(2)) in the lubricant blending process for theophylline tablets. The response surfaces, design space, and their reliability of the compression rate of the powder mixture (Y(1)), tablet hardness (Y(2)), and dissolution rate (Y(3)) on a small scale were calculated using multivariate spline interpolation, a bootstrap resampling technique, and self-organizing map clustering. The constant Froude number was applied as a scale-up rule. Three experiments under an optimal condition and two experiments under other conditions were performed on a large scale. The response surfaces on the small scale were corrected to those on a large scale by Bayesian estimation using the large-scale results. Large-scale experiments under three additional sets of conditions showed that the corrected design space was more reliable than that on the small scale, even if there was some discrepancy in the pharmaceutical quality between the manufacturing scales. This approach is useful for setting up a design space in pharmaceutical development when a DoE cannot be performed at a commercial large manufacturing scale.

Development of a User Interface for a Regression Analysis Software Tool

NASA Technical Reports Server (NTRS)

Ulbrich, Norbert Manfred; Volden, Thomas R.

2010-01-01

An easy-to -use user interface was implemented in a highly automated regression analysis tool. The user interface was developed from the start to run on computers that use the Windows, Macintosh, Linux, or UNIX operating system. Many user interface features were specifically designed such that a novice or inexperienced user can apply the regression analysis tool with confidence. Therefore, the user interface s design minimizes interactive input from the user. In addition, reasonable default combinations are assigned to those analysis settings that influence the outcome of the regression analysis. These default combinations will lead to a successful regression analysis result for most experimental data sets. The user interface comes in two versions. The text user interface version is used for the ongoing development of the regression analysis tool. The official release of the regression analysis tool, on the other hand, has a graphical user interface that is more efficient to use. This graphical user interface displays all input file names, output file names, and analysis settings for a specific software application mode on a single screen which makes it easier to generate reliable analysis results and to perform input parameter studies. An object-oriented approach was used for the development of the graphical user interface. This choice keeps future software maintenance costs to a reasonable limit. Examples of both the text user interface and graphical user interface are discussed in order to illustrate the user interface s overall design approach.

Precision Adjustable Liquid Regulator (ALR)

NASA Astrophysics Data System (ADS)

Meinhold, R.; Parker, M.

2004-10-01

A passive mechanical regulator has been developed for the control of fuel or oxidizer flow to a 450N class bipropellant engine for use on commercial and interplanetary spacecraft. There are several potential benefits to the propulsion system, depending on mission requirements and spacecraft design. This system design enables more precise control of main engine mixture ratio and inlet pressure, and simplifies the pressurization system by transferring the function of main engine flow rate control from the pressurization/propellant tank assemblies, to a single component, the ALR. This design can also reduce the thermal control requirements on the propellant tanks, avoid costly Qualification testing of biprop engines for missions with more stringent requirements, and reduce the overall propulsion system mass and power usage. In order to realize these benefits, the ALR must meet stringent design requirements. The main advantage of this regulator over other units available in the market is that it can regulate about its nominal set point to within +/-0.85%, and change its regulation set point in flight +/-4% about that nominal point. The set point change is handled actively via a stepper motor driven actuator, which converts rotary into linear motion to affect the spring preload acting on the regulator. Once adjusted to a particular set point, the actuator remains in its final position unpowered, and the regulator passively maintains outlet pressure. The very precise outlet regulation pressure is possible due to new technology developed by Moog, Inc. which reduces typical regulator mechanical hysteresis to near zero. The ALR requirements specified an outlet pressure set point range from 225 to 255 psi, and equivalent water flow rates required were in the 0.17 lb/sec range. The regulation output pressure is maintained at +/-2 psi about the set point from a P (delta or differential pressure) of 20 to over 100 psid. Maximum upstream system pressure was specified at 320 psi. The regulator is fault tolerant in that it was purposely designed with no shutoff capability, such that the minimum flow position of the poppet still allows the subsystem to provide adequate flow to the main engine for basic operation.

Why does Japan use the probability method to set design flood?

NASA Astrophysics Data System (ADS)

Nakamura, S.; Oki, T.

2015-12-01

Design flood is hypothetical flood to make flood prevention plan. In Japan, a probability method based on precipitation data is used to define the scale of design flood: Tone River, the biggest river in Japan, is 1 in 200 years, Shinano River is 1 in 150 years, and so on. It is one of important socio-hydrological issue how to set reasonable and acceptable design flood in a changing world. The method to set design flood vary among countries. Although the probability method is also used in Netherland, but the base data is water level or discharge data and the probability is 1 in 1250 years (in fresh water section). On the other side, USA and China apply the maximum flood method which set the design flood based on the historical or probable maximum flood. This cases can leads a question: "what is the reason why the method vary among countries?" or "why does Japan use the probability method?" The purpose of this study is to clarify the historical process which the probability method was developed in Japan based on the literature. In the late 19the century, the concept of "discharge" and modern river engineering were imported by Dutch engineers, and modern flood prevention plans were developed in Japan. In these plans, the design floods were set based on the historical maximum method. Although the historical maximum method had been used until World War 2, however, the method was changed to the probability method after the war because of limitations of historical maximum method under the specific socio-economic situations: (1) the budget limitation due to the war and the GHQ occupation, (2) the historical floods: Makurazaki typhoon in 1945, Kathleen typhoon in 1947, Ione typhoon in 1948, and so on, attacked Japan and broke the record of historical maximum discharge in main rivers and the flood disasters made the flood prevention projects difficult to complete. Then, Japanese hydrologists imported the hydrological probability statistics from the West to take account of socio-economic situation in design flood, and they applied to Japanese rivers in 1958. The probability method was applied Japan to adapt the specific socio-economic and natural situation during the confusion after the war.

Modeling and Analysis of Space Based Transceivers

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.; Liebetreu, John; Moore, Michael S.; Price, Jeremy C.; Abbott, Ben

2005-01-01

This paper presents the tool chain, methodology, and initial results of a study to provide a thorough, objective, and quantitative analysis of the design alternatives for space Software Defined Radio (SDR) transceivers. The approach taken was to develop a set of models and tools for describing communications requirements, the algorithm resource requirements, the available hardware, and the alternative software architectures, and generate analysis data necessary to compare alternative designs. The Space Transceiver Analysis Tool (STAT) was developed to help users identify and select representative designs, calculate the analysis data, and perform a comparative analysis of the representative designs. The tool allows the design space to be searched quickly while permitting incremental refinement in regions of higher payoff.

Modeling and Analysis of Space Based Transceivers

NASA Technical Reports Server (NTRS)

Moore, Michael S.; Price, Jeremy C.; Abbott, Ben; Liebetreu, John; Reinhart, Richard C.; Kacpura, Thomas J.

2007-01-01

This paper presents the tool chain, methodology, and initial results of a study to provide a thorough, objective, and quantitative analysis of the design alternatives for space Software Defined Radio (SDR) transceivers. The approach taken was to develop a set of models and tools for describing communications requirements, the algorithm resource requirements, the available hardware, and the alternative software architectures, and generate analysis data necessary to compare alternative designs. The Space Transceiver Analysis Tool (STAT) was developed to help users identify and select representative designs, calculate the analysis data, and perform a comparative analysis of the representative designs. The tool allows the design space to be searched quickly while permitting incremental refinement in regions of higher payoff.

Design of a multimedia gateway for mobile devices

NASA Astrophysics Data System (ADS)

Hens, Raf; Goeminne, Nico; Van Hoecke, Sofie; Verdickt, Tom; Bouve, Thomas; Gielen, Frank; Demeester, Piet

2005-03-01

Although mobile users are currently offered a lot more capabilities on their mobile devices, they still experience some limitations. They can surf the Internet, read their e-mail and receive MMS messages, but they have limited processing power, storage capacity and bandwidth and are limited in their access to peripherals (e.g. printers). We have designed and implemented a multimedia gateway for mobile devices that reduces these limitations. It gives the mobile devices transparent access to high capacity devices connected to the gateway, which is built around a central, modularly extensible server that can run on any PC or home gateway. It manages two sets of modules: one set offering the actual services and another set handling the IP-based wireless interaction with the client applications on the mobile devices. These modules can be added and removed dynamically, offering new services on the fly. Currently services for storage, printing, domotics and playing music are provided. Others can easily be added later on. This paper discusses the architecture and development, the management of modules, the actual services and their benefits. Besides a proprietary implementation, it also looks into OSGi and how both platforms compare to each other, concerning design, architecture, ease of development, functionality, ...

Automated Engineering Design (AED); An approach to automated documentation

NASA Technical Reports Server (NTRS)

Mcclure, C. W.

1970-01-01

The automated engineering design (AED) is reviewed, consisting of a high level systems programming language, a series of modular precoded subroutines, and a set of powerful software machine tools that effectively automate the production and design of new languages. AED is used primarily for development of problem and user-oriented languages. Software production phases are diagramed, and factors which inhibit effective documentation are evaluated.

78 FR 69943 - Anthropomorphic Test Devices; Q3s 3-Year-Old Child Side Impact Test Dummy, Incorporation by...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

... design and by July 2007 Build Level C was released. b. Developments In 2007, the Occupant Safety Research... reference a parts list, a set of design drawings, and a ``Procedures for Assembly, Disassembly and Inspection (PADI)'' document, to ensure that all Q3s dummies are the same in their design and construction.\\2...

The Design and Development of an Online, Case-Based Course in a Teacher Preparation Program

ERIC Educational Resources Information Center

Peña, Carmen M.

2004-01-01

The goals of this study were to: 1) design a web-based course using WebCT for future secondary school teachers at the University of Texas Pan American, 2) evaluate the effectiveness of the course, and 3) provide a set of guidelines for designing web-based courses for other teacher educators. The participants in this study consisted of junior- and…

Dynamic programming methods for concurrent design and dynamic allocation of vehicles embedded in a system-of-systems

NASA Astrophysics Data System (ADS)

Nusawardhana

2007-12-01

Recent developments indicate a changing perspective on how systems or vehicles should be designed. Such transition comes from the way decision makers in defense related agencies address complex problems. Complex problems are now often posed in terms of the capabilities desired, rather than in terms of requirements for a single systems. As a result, the way to provide a set of capabilities is through a collection of several individual, independent systems. This collection of individual independent systems is often referred to as a "System of Systems'' (SoS). Because of the independent nature of the constituent systems in an SoS, approaches to design an SoS, and more specifically, approaches to design a new system as a member of an SoS, will likely be different than the traditional design approaches for complex, monolithic (meaning the constituent parts have no ability for independent operation) systems. Because a system of system evolves over time, this simultaneous system design and resource allocation problem should be investigated in a dynamic context. Such dynamic optimization problems are similar to conventional control problems. However, this research considers problems which not only seek optimizing policies but also seek the proper system or vehicle to operate under these policies. This thesis presents a framework and a set of analytical tools to solve a class of SoS problems that involves the simultaneous design of a new system and allocation of the new system along with existing systems. Such a class of problems belongs to the problems of concurrent design and control of a new systems with solutions consisting of both optimal system design and optimal control strategy. Rigorous mathematical arguments show that the proposed framework solves the concurrent design and control problems. Many results exist for dynamic optimization problems of linear systems. In contrary, results on optimal nonlinear dynamic optimization problems are rare. The proposed framework is equipped with the set of analytical tools to solve several cases of nonlinear optimal control problems: continuous- and discrete-time nonlinear problems with applications on both optimal regulation and tracking. These tools are useful when mathematical descriptions of dynamic systems are available. In the absence of such a mathematical model, it is often necessary to derive a solution based on computer simulation. For this case, a set of parameterized decision may constitute a solution. This thesis presents a method to adjust these parameters based on the principle of stochastic approximation simultaneous perturbation using continuous measurements. The set of tools developed here mostly employs the methods of exact dynamic programming. However, due to the complexity of SoS problems, this research also develops suboptimal solution approaches, collectively recognized as approximate dynamic programming solutions, for large scale problems. The thesis presents, explores, and solves problems from an airline industry, in which a new aircraft is to be designed and allocated along with an existing fleet of aircraft. Because the life cycle of an aircraft is on the order of 10 to 20 years, this problem is to be addressed dynamically so that the new aircraft design is the best design for the fleet over a given time horizon.

Results from a preliminary study to develop the quality adjustments for quality adjusted life year values for Trinidad and Tobago.

PubMed

Bailey, H

2013-07-01

No country can afford to provide all necessary healthcare for its citizens, so prioritization among interventions must feature in all health systems. Resources in health should be allocated among interventions/facilities/patients in such a way as to be in line with the objectives of the health system. To achieve this, resource allocation decisions must be informed by the relative contributions that prospective interventions will make to societal health and to costs. Internationally, the EQ-5D based quality adjusted life year (QALY) now dominates this kind of analysis. This paper reports on a pilot study to develop an EQ-5D-3L value set for Trinidad and Tobago based on a protocol that avoids some of the issues that are associated with other approaches to developing such value sets such as the complex elicitation tasks that respondents must carry out, and the large respondent samples required for collecting multiple valuation subset values using blocked designs. An orthogonal discrete choice experiment design was used to elicit a set of choices from a sample of respondents. The choice data were analysed using mixed multinomial logistic regression to produce an internally valid model that predicts well. This paper marks an important milestone in the development of health resource allocation in the Caribbean. It sets out the importance of incorporating the impact of health interventions to inform health resource allocation decisions, describes the elicitation and analysis methods used in the pilot and provides an illustration of the use of the EQ-5D value set.

Mechanism Design Principle for Optical-Precision, Deployable Instruments

NASA Technical Reports Server (NTRS)

Lake, Mark S.; Hachkowski, M. Roman

2000-01-01

The present paper is intended to be a guide for the design of 'microdynamically quiet' deployment mechanisms for optical-precision structures, such as deployable telescope mirrors and optical benches. Many of the guidelines included herein come directly from the field of optomechanical engineering, and are neither newly developed guidelines nor are they uniquely applicable to high-precision deployment mechanisms. However, the application of these guidelines to the design of deployment mechanisms is a rather new practice, so efforts are made herein to illustrate the process through the discussion of specific examples. The present paper summarizes a more extensive set of design guidelines for optical-precision mechanisms that are under development.

The common engine concept for ALS application - A cost reduction approach

NASA Technical Reports Server (NTRS)

Bair, E. K.; Schindler, C. M.

1989-01-01

Future launch systems require the application of propulsion systems which have been designed and developed to meet mission model needs while providing high degrees of reliability and cost effectiveness. Vehicle configurations which utilize different propellant combinations for booster and core stages can benefit from a common engine approach where a single engine design can be configured to operate on either set of propellants and thus serve as either a booster or core engine. Engine design concepts and mission application for a vehicle employing a common engine are discussed. Engine program cost estimates were made and cost savings, over the design and development of two unique engines, estimated.

A fast bottom-up algorithm for computing the cut sets of noncoherent fault trees

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corynen, G.C.

1987-11-01

An efficient procedure for finding the cut sets of large fault trees has been developed. Designed to address coherent or noncoherent systems, dependent events, shared or common-cause events, the method - called SHORTCUT - is based on a fast algorithm for transforming a noncoherent tree into a quasi-coherent tree (COHERE), and on a new algorithm for reducing cut sets (SUBSET). To assure sufficient clarity and precision, the procedure is discussed in the language of simple sets, which is also developed in this report. Although the new method has not yet been fully implemented on the computer, we report theoretical worst-casemore » estimates of its computational complexity. 12 refs., 10 figs.« less

Evaluating the iterative development of VR/AR human factors tools for manual work.

PubMed

Liston, Paul M; Kay, Alison; Cromie, Sam; Leva, Chiara; D'Cruz, Mirabelle; Patel, Harshada; Langley, Alyson; Sharples, Sarah; Aromaa, Susanna

2012-01-01

This paper outlines the approach taken to iteratively evaluate a set of VR/AR (virtual reality / augmented reality) applications for five different manual-work applications - terrestrial spacecraft assembly, assembly-line design, remote maintenance of trains, maintenance of nuclear reactors, and large-machine assembly process design - and examines the evaluation data for evidence of the effectiveness of the evaluation framework as well as the benefits to the development process of feedback from iterative evaluation. ManuVAR is an EU-funded research project that is working to develop an innovative technology platform and a framework to support high-value, high-knowledge manual work throughout the product lifecycle. The results of this study demonstrate the iterative improvements reached throughout the design cycles, observable through the trending of the quantitative results from three successive trials of the applications and the investigation of the qualitative interview findings. The paper discusses the limitations of evaluation in complex, multi-disciplinary development projects and finds evidence of the effectiveness of the use of the particular set of complementary evaluation methods incorporating a common inquiry structure used for the evaluation - particularly in facilitating triangulation of the data.

Challenges and Opportunities: Using a Science-Based Video Game in Secondary School Settings

ERIC Educational Resources Information Center

Muehrer, Rachel; Jenson, Jennifer; Friedberg, Jeremy; Husain, Nicole

2012-01-01

Simulations and games are not new artifacts to the study of science in secondary school settings (Hug, Kriajcik and Marx 2005), however teachers remain skeptical as to their value, use and appropriateness (Rice 2006). The difficulty is not only the design and development of effective play environments that produce measurable changes in knowledge…

Comparison of nine PCR primer sets designed to detect Pantoea stewartii subsp. stewartii in maize

USDA-ARS?s Scientific Manuscript database

Pantoea stewartii subsp. stewartii, the causal agent of Stewart's bacterial wilt of maize, is a major quarantine pest in maize seed. Verifying freedom from P. stewartii remains a significant hurdle in exporting corn seed from the U.S. Several PCR primer sets have been developed and suggested as bein...

Swift and Smart Decision Making: Heuristics that Work

ERIC Educational Resources Information Center

Hoy, Wayne K.; Tarter, C. J.

2010-01-01

Purpose: The aim of this paper is to examine the research literature on decision making and identify and develop a set of heuristics that work for school decision makers. Design/methodology/approach: This analysis is a synthesis of the research on decision-making heuristics that work. Findings: A set of nine rules for swift and smart decision…

Student Perceptions of the Progress Test in Two Settings and the Implications for Test Deployment

ERIC Educational Resources Information Center

Wade, Louise; Harrison, Chris; Hollands, James; Mattick, Karen; Ricketts, Chris; Wass, Val

2012-01-01

Background: The Progress Test (PT) was developed to assess student learning within integrated curricula. Whilst it is effective in promoting and rewarding deep approaches to learning in some settings, we hypothesised that implementation of the curriculum (design and assessment) may impact on students' preparation for the PT and their learning.…

How and with What Accuracy Do Children Report Self-Regulated Learning in Contemporary EFL Instructional Settings?

ERIC Educational Resources Information Center

Ferreira, P. Costa; Simão, A. M. Veiga; da Silva, A. Lopes

2017-01-01

This study aimed to understand how children reflect about learning, report their regulation of learning activity, and develop their performance in contemporary English as a Foreign Language instructional settings. A quasi-experimental design was used with one experimental group working in a self-regulated learning computer-supported instructional…

3D Digital Legos for Teaching Security Protocols

ERIC Educational Resources Information Center

Yu, Li; Harrison, L.; Lu, Aidong; Li, Zhiwei; Wang, Weichao

2011-01-01

We have designed and developed a 3D digital Lego system as an education tool for teaching security protocols effectively in Information Assurance courses (Lego is a trademark of the LEGO Group. Here, we use it only to represent the pieces of a construction set.). Our approach applies the pedagogical methods learned from toy construction sets by…

Poder es Saber. Workshop: Developing a Bilingual Curriculum (New Mexico Highlands University, Las Vegas, New Mexico, June 1977).

ERIC Educational Resources Information Center

Bass de Martinez, Bernice

Bilingual teachers and program directors of northern New Mexico attended a workshop at New Mexico Highlands University to examine the curriculum designed to meet the needs of students within the bilingual bicultural setting. Participants were asked to redefine curriculum within the "workshop" setting. Consultants assisted the group in…

Exploring Gender and Self-Efficacy Ratings of Athletic Training Students over Time

ERIC Educational Resources Information Center

Carr, W. David; Volberding, Jennifer L.

2014-01-01

Objective: To describe the development of a self-efficacy instrument and to explore the changes by gender in student self-efficacy ratings over 1 year. Design and Setting: An exploratory study utilizing an instrument that measures self-efficacy in undergraduate students in a university setting. Patients or Other Participants: Thirty students (13…

Evaluation of Occupational Therapy Workshops to Prevent Work-Related Injuries or Illnesses among Vocational Students

ERIC Educational Resources Information Center

Lecours, Alexandra; Therriault, Pierre-Yves

2018-01-01

The few studies aiming to evaluate prevention interventions provided by occupational therapists in health at work were conducted in work settings. However, to intervene in primary prevention, developing occupational therapy interventions with students learning a trade is relevant. The objective is to evaluate workshops designed and set up by…

Clinical Guide to Music Therapy in Physical Rehabilitation Settings

ERIC Educational Resources Information Center

Wong, Elizabeth

2004-01-01

Elizabeth Wong, MT-BC presents tools and information designed to arm the entry-level music therapist (or an experienced MT-BC new to rehabilitation settings) with basic knowledge and materials to develop or work in a music therapy program treating people with stroke, brain injury, and those who are ventilator dependent. Ms. Wong offers goals and…

Patient Core Data Set. Standard for a longitudinal health/medical record.

PubMed

Renner, A L; Swart, J C

1997-01-01

Blue Chip Computers Company, in collaboration with Wright State University-Miami Valley College of Nursing and Health, with support from the Agency for Health Care Policy and Research, Public Health Service, completed Small Business innovative Research research to design a comprehensive integrated Patient information System. The Wright State University consultants undertook the development of a Patient Core Data Set (PCDS) in response to the lack of uniform standards of minimum data sets, and lack of standards in data transfer for continuity of care. The purpose of the Patient Core Data Set is to develop a longitudinal patient health record and medical history using a common set of standard data elements with uniform definitions and coding consistent with Health Level 7 (HL7) protocol and the American Society for Testing and Materials (ASTM) standards. The PCDS, intended for transfer across all patient-care settings, is essential information for clinicians, administrators, researchers, and health policy makers.

PISA for Development System-Level Data. PISA for Development Brief 18

ERIC Educational Resources Information Center

OECD Publishing, 2017

2017-01-01

The PISA for Development brief series is a set of concise monthly education policy-oriented notes published by the OECD which are designed to describe a specific PISA for Development topic. In this brief, the role of PISA-D to assesses students' skills and knowledge in three cognitive domains--reading, mathematics and science--and collection of…

Designing a Web-Based Learning Portal for Geographic Visualization and Analysis in Public Health

PubMed Central

Robinson, Anthony C.; Roth, Robert E.; MacEachren, Alan M.

2011-01-01

Interactive mapping and spatial analysis tools are underutilized by health researchers and decision-makers due to scarce training materials, few examples demonstrating the successful use of geographic visualization, and poor mechanisms for sharing results generated by geovisualization. We report here on the development of the Geovisual EXplication (G-EX) Portal, a web-based application designed to connect researchers in geovisualization and related mapping sciences to users who are working in public health and epidemiology. This paper focuses on the design and development of the G-EX Portal Learn module, a set of tools intended to disseminate learning artifacts. Initial design and development of the G-EX Portal has been guided by our past research on use and usability of geovisualization in public health. As part of the iterative design and development process, we conducted a needs assessment survey with targeted end-users that we report on here. The survey focused on users’ current learning habits, their preferred kind of learning artifacts, and issues they may have with contributing learning artifacts to web portals. Survey results showed that users desire a diverse set of learning artifacts in terms of both formats and topics covered. Results also revealed a willingness of users to contribute both learning artifacts and personal information that would help other users to evaluate the credibility of the learning artifact source. We include a detailed description of the G-EX Portal Learn module and focus on modifications to the design of the Learn module as a result from feedback we received from our survey. PMID:21937462

Calculation of Coupled Vibroacoustics Response Estimates from a Library of Available Uncoupled Transfer Function Sets

NASA Technical Reports Server (NTRS)

Smith, Andrew; LaVerde, Bruce; Hunt, Ron; Fulcher, Clay; Towner, Robert; McDonald, Emmett

2012-01-01

The design and theoretical basis of a new database tool that quickly generates vibroacoustic response estimates using a library of transfer functions (TFs) is discussed. During the early stages of a launch vehicle development program, these response estimates can be used to provide vibration environment specification to hardware vendors. The tool accesses TFs from a database, combines the TFs, and multiplies these by input excitations to estimate vibration responses. The database is populated with two sets of uncoupled TFs; the first set representing vibration response of a bare panel, designated as H(sup s), and the second set representing the response of the free-free component equipment by itself, designated as H(sup c). For a particular configuration undergoing analysis, the appropriate H(sup s) and H(sup c) are selected and coupled to generate an integrated TF, designated as H(sup s +c). This integrated TF is then used with the appropriate input excitations to estimate vibration responses. This simple yet powerful tool enables a user to estimate vibration responses without directly using finite element models, so long as suitable H(sup s) and H(sup c) sets are defined in the database libraries. The paper discusses the preparation of the database tool and provides the assumptions and methodologies necessary to combine H(sup s) and H(sup c) sets into an integrated H(sup s + c). An experimental validation of the approach is also presented.

Ontorat: automatic generation of new ontology terms, annotations, and axioms based on ontology design patterns.

PubMed

Xiang, Zuoshuang; Zheng, Jie; Lin, Yu; He, Yongqun

2015-01-01

It is time-consuming to build an ontology with many terms and axioms. Thus it is desired to automate the process of ontology development. Ontology Design Patterns (ODPs) provide a reusable solution to solve a recurrent modeling problem in the context of ontology engineering. Because ontology terms often follow specific ODPs, the Ontology for Biomedical Investigations (OBI) developers proposed a Quick Term Templates (QTTs) process targeted at generating new ontology classes following the same pattern, using term templates in a spreadsheet format. Inspired by the ODPs and QTTs, the Ontorat web application is developed to automatically generate new ontology terms, annotations of terms, and logical axioms based on a specific ODP(s). The inputs of an Ontorat execution include axiom expression settings, an input data file, ID generation settings, and a target ontology (optional). The axiom expression settings can be saved as a predesigned Ontorat setting format text file for reuse. The input data file is generated based on a template file created by a specific ODP (text or Excel format). Ontorat is an efficient tool for ontology expansion. Different use cases are described. For example, Ontorat was applied to automatically generate over 1,000 Japan RIKEN cell line cell terms with both logical axioms and rich annotation axioms in the Cell Line Ontology (CLO). Approximately 800 licensed animal vaccines were represented and annotated in the Vaccine Ontology (VO) by Ontorat. The OBI team used Ontorat to add assay and device terms required by ENCODE project. Ontorat was also used to add missing annotations to all existing Biobank specific terms in the Biobank Ontology. A collection of ODPs and templates with examples are provided on the Ontorat website and can be reused to facilitate ontology development. With ever increasing ontology development and applications, Ontorat provides a timely platform for generating and annotating a large number of ontology terms by following design patterns. http://ontorat.hegroup.org/.

Rdesign: A data dictionary with relational database design capabilities in Ada

NASA Technical Reports Server (NTRS)

Lekkos, Anthony A.; Kwok, Teresa Ting-Yin

1986-01-01

Data Dictionary is defined to be the set of all data attributes, which describe data objects in terms of their intrinsic attributes, such as name, type, size, format and definition. It is recognized as the data base for the Information Resource Management, to facilitate understanding and communication about the relationship between systems applications and systems data usage and to help assist in achieving data independence by permitting systems applications to access data knowledge of the location or storage characteristics of the data in the system. A research and development effort to use Ada has produced a data dictionary with data base design capabilities. This project supports data specification and analysis and offers a choice of the relational, network, and hierarchical model for logical data based design. It provides a highly integrated set of analysis and design transformation tools which range from templates for data element definition, spreadsheet for defining functional dependencies, normalization, to logical design generator.

Providing Simulated Online and Mobile Learning Experiences in a Prison Education Setting: Lessons Learned from the PLEIADES Pilot Project

ERIC Educational Resources Information Center

Farley, Helen; Murphy, Angela; Bedford, Tasman

2014-01-01

This article reports on the preliminary findings, design criteria and lessons learned while developing and piloting an alternative to traditional print-based education delivery within a prison environment. PLEIADES (Portable Learning Environments for Incarcerated Distance Education Students), was designed to provide incarcerated students with…

Researching Doctoral Pedagogy Close up: Design and Action in Two Doctoral Programmes

ERIC Educational Resources Information Center

Danby, Susan; Lee, Alison

2012-01-01

With growing international interest in diversifying sites for pedagogical work within the doctorate, doctoral programmes of different kinds are being developed in different disciplinary, institutional and national settings. However, little is known about how the pedagogical work of these programmes is designed and enacted, and with what effects.…

Applying Universal Design for Learning in Online Courses: Pedagogical and Practical Considerations

ERIC Educational Resources Information Center

Dell, Cindy Ann; Dell, Thomas F.; Blackwell, Terry L.

2015-01-01

Inclusion of the universal design for learning (UDL) model as a guiding set of principles for online curriculum development in higher education is discussed. Fundamentally, UDL provides the student with multiple means of accessing the course based on three overarching principles: presentation; action and expression; and engagement and interaction.…

Promoting Positive Academic Dispositions Using a Web-Based PBL Environment: The GlobalEd 2 Project

ERIC Educational Resources Information Center

Brown, Scott W.; Lawless, Kimberly A.; Boyer, Mark A.

2013-01-01

Problem-based learning (PBL) is an instructional design approach for promoting student learning, understanding and knowledge development in context rich settings. Previous PBL research has primarily focused on face-to-face learning environments, but current technologies afford PBL designers the opportunities to create online, virtual, PBL…

Development of performance specifications for collision avoidance systems for lane change, merging, and backing. Task 6, Interim report : testbed systems design and associated facilities

DOT National Transportation Integrated Search

1997-05-01

This report represents the documentation of the design of the testbed. The purposes of the testbed are twofold 1) Establish a foundation for estimating collision avoidance effectiveness and 2) Provide information pertinent to setting performance spec...

Parent-Reported Social Support for Child's Fruit and Vegetable Intake: Validity of Measures

ERIC Educational Resources Information Center

Dave, Jayna M.; Evans, Alexandra E.; Condrasky, Marge D.; Williams, Joel E.

2012-01-01

Objective: To develop and validate measures of parental social support to increase their child's fruit and vegetable (FV) consumption. Design: Cross-sectional study design. Setting: School and home. Participants: Two hundred three parents with at least 1 elementary school-aged child. Main Outcome Measure: Parents completed a questionnaire that…

Accelerated Districts--The Next Step. A Summary of Research and Design.

ERIC Educational Resources Information Center

Driver, Cyrus; And Others

The National Center for the Accelerated Schools Project at Stanford University has recognized that district-level change is necessary if changes at accelerated schools are to gain permanence and become widespread. The Center has therefore initiated a research and development project to design a set of models on which districts can reconstitute…

Designing Ubiquitous Computing to Enhance Children's Learning in Museums

ERIC Educational Resources Information Center

Hall, T.; Bannon, L.

2006-01-01

In recent years, novel paradigms of computing have emerged, which enable computational power to be embedded in artefacts and in environments in novel ways. These developments may create new possibilities for using computing to enhance learning. This paper presents the results of a design process that set out to explore interactive techniques,…

Practice Ethical Behavior. Work Maturity Skills. Competency 4.0.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

Designed for use as a part of the Work Maturity Skills Training Program, this unit consists of instructional materials dealing with practicing ethical behavior. (The Work Maturity Skills Training Program is a set of individualized competency-based units that are designed to help participants develop the competencies they need to find and retain…

Designing Reading Instruction for Cultural Minorities: The Case of the Kamehameha Early Education Program.

ERIC Educational Resources Information Center

Calfee, Robert C.; And Others

This is a report on the Kamehameha Early Education Program (KEEP), a research and development project designed to find ways of improving the school performance of educationally disadvantaged Hawaiian children. The project, implemented in a laboratory school setting and continuously monitored, is described as a reading instruction program for…

Developing and Testing Rational Models of Message Design.

ERIC Educational Resources Information Center

O'Keefe, Barbara J.

1992-01-01

Responds to an article in the same issue regarding research methods for conversational cognition. Argues for a noncognitive view of rational models in communication research. Sets out an analysis of the kinds of claims made by rational models of message design. Discusses the implications of this analysis for studies of the cognitive processes…

Using Meta-Analysis to Explain Variation in Head Start Research Results: The Role of Research Design

ERIC Educational Resources Information Center

Shager, Hilary M.; Schindler, Holly S.; Hart, Cassandra M.D.; Duncan, Greg J.; Magnuson, Katherine A.; Yoshikawa, Hirokazu

2010-01-01

Head Start was designed as a holistic intervention to improve economically disadvantaged, preschool-aged children's cognitive and social development by providing a comprehensive set of educational, health, nutritional, and social services, as well as opportunities for parent involvement (Zigler & Valentine, 1979). Given the current interest in ECE…

77 FR 68784 - Standard Test Procedures Approval Process for Respirators To Be Used in Wildland Fire-Fighting...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-16

... regulations allow. Because manufacturers have not yet developed respiratory protection for this occupational...-approved filtering facepiece respirators which are not designed for this use, or no respiratory protection... respiratory protective devices designed for the inhalation hazards of this occupational setting. On July 10...

Design of Education Methods in a Virtual Environment

ERIC Educational Resources Information Center

Yavich, Roman; Starichenko, Boris

2017-01-01

The purpose of the presented article is to review existing approaches to modern training methods design and to create a variant of its technology in virtual educational environments in order to develop general cultural and professional students' competence in pedagogical education. The conceptual modeling of a set of methods for students' training…

Learning about "Half": Critical Aspects and Pedagogical Strategies in Designed Preschool Activities

ERIC Educational Resources Information Center

Björklund, Camilla

2018-01-01

This is an empirical inquiry concerning children's concept development and early mathematics teaching. The intention is to broaden the understanding of preschool children's perceptions of the concept "half" (as 1 of 2 equal parts of a whole), in designed mathematics teaching settings. Three teachers working with 4-5-year-old children…

Reconciling Rigour and Impact by Collaborative Research Design: Study of Teacher Agency

ERIC Educational Resources Information Center

Pantic, Nataša

2017-01-01

This paper illustrates a new way of working collaboratively on the development of a methodology for studying teacher agency for social justice. Increasing emphasis of impact on change as a purpose of social research raises questions about appropriate research designs. Large-scale quantitative research framed within externally set parameters has…

Regulatory Forum opinion piece: New testing paradigms for reproductive and developmental toxicity--the NTP modified one generation study and OECD 443.

PubMed

Foster, Paul M D

2014-12-01

The National Toxicology Program (NTP) has developed a new flexible study design, termed the modified one generation (MOG) reproduction study. The MOG study will encompass measurements of developmental and reproductive toxicity parameters as well as enable the setting of appropriate dose levels for a cancer bioassay through evaluation of target organ toxicity that is based on test article exposure that starts during gestation. This study design is compared and contrasted with the new Organization for Economic Co-operation and Development (OECD) 443 test guideline, the extended one generation reproduction study. The MOG study has a number of advantages, with a focus on F 1 animals, the generation of adequately powered, robust data sets that include both pre and postnatal developmental toxicity information, and the measurement of effects on reproductive structure and function in the same animals. This new study design does not employ the use of internal triggers in the design structure for the use of animals already on test and is also consistent with the principles of the 3R's. © 2014 by The Author(s).

Analytical procedure validation and the quality by design paradigm.

PubMed

Rozet, Eric; Lebrun, Pierre; Michiels, Jean-François; Sondag, Perceval; Scherder, Tara; Boulanger, Bruno

2015-01-01

Since the adoption of the ICH Q8 document concerning the development of pharmaceutical processes following a quality by design (QbD) approach, there have been many discussions on the opportunity for analytical procedure developments to follow a similar approach. While development and optimization of analytical procedure following QbD principles have been largely discussed and described, the place of analytical procedure validation in this framework has not been clarified. This article aims at showing that analytical procedure validation is fully integrated into the QbD paradigm and is an essential step in developing analytical procedures that are effectively fit for purpose. Adequate statistical methodologies have also their role to play: such as design of experiments, statistical modeling, and probabilistic statements. The outcome of analytical procedure validation is also an analytical procedure design space, and from it, control strategy can be set.

Barriers to the Uptake of Eye Care Services in Developing Countries: A Systematic Review of Interventions

ERIC Educational Resources Information Center

Abdullah, Khadija Nowaira; Al-Sharqi, Omar Zayan; Abdullah, Muhammad Tanweer

2013-01-01

Objective: This research identifies effective and ineffective interventions for reducing barriers to the uptake of eye care services in developing countries. Design: Systematic literature review. Setting: Only research studies done in developing countries were included. Method: The review is restricted to English-language articles published…

The Blake Interaction Model for Task Force Program Development in Vocational Education.

ERIC Educational Resources Information Center

Blake, Duane L.

The Blake Interaction Model presented in this manual is designed to eliminate three problems which usually confront a task force charged with the responsibility of program development in a conference setting: (1) how to involve simultaneously several work groups in the productive capacity developing solutions for several separate problems; (2) how…

Teacher Performance Assessment Instruments: Plans for Practice Rating.

ERIC Educational Resources Information Center

Capie, William; And Others

This manual consists of lesson plans developed to train data collectors in the use of the Teacher Performance Assessment Instruments (TPAI). Each set of plans was designed for one of three purposes. Lesson plans developed for the Teaching Plans and Materials Instrument (TPM) simulate a portfolio prepared by the teacher. One-day plans developed for…

Designing and Evaluating a Personal Skills Development Program for Management Education

ERIC Educational Resources Information Center

Pang, Elvy; Hung, Humphry

2012-01-01

Success in preparing business students for professional careers requires these students to develop a set of well-defined personal skills. The present study examined 145 business students to assess the effectiveness of a personal skills development (PSD) program by measuring the impact of the training on the students' attitudes in skill development…

Achievement Motivation Development Project. Final Report. Appendix IV, Part 2.

ERIC Educational Resources Information Center

McClelland, David C.; Alschuler, Alfred S.

The Achievement Motivation Development Project is described. The Project has culminated in the development of course materials designed explicitly to promote aspects of psychological growth. As such, it is viewed as but one thrust in an emerging psychological education movement. Achievement motivation is defined as a way of planning, a set of…

Feasibility of an Online Professional Development Program for Early Intervention Practitioners

ERIC Educational Resources Information Center

Kyzar, Kathleen B.; Chiu, Caya; Kemp, Peggy; Aldersey, Heather Michelle; Turnbull, Ann P.; Lindeman, David P.

2014-01-01

This article reports findings from 2 studies situated within a larger scope of design research on a professional development program, "Early Years," for Part C early intervention practitioners, working with families in home and community settings. Early Years includes online modules and onsite mentor coaching, and its development has…

Professional development session for early career scientists at SITC 2012

PubMed Central

2013-01-01

The Society for Immunotherapy of Cancer (SITC) 2012 Professional Development Session was held as part of the SITC 27th Annual Meeting, Washington, DC, on October 24, 2012. The session was designed as a new opportunity for early career investigators to learn about relevant career development topics in a didactic setting. PMID:25742323

Challenges in the Development of Environmental Management Systems on the Modern University Campus

ERIC Educational Resources Information Center

Bero, Bridget N.; Doerry, Eckehard; Middleton, Ryan; Meinhardt, Christian

2012-01-01

Purpose: The purpose of this paper is to describe challenges and lessons learned in the design and development of a comprehensive, flexible environmental management system (EMS) in a real university setting; also to inform development of similar systems elsewhere and provide a modular, extensible software architecture for such efforts.…

An Intervention to Increase Early Childhood Staff Capacity for Promoting Children's Social-Emotional Development in Preschool Settings

ERIC Educational Resources Information Center

Green, Beth L.; Malsch, Anna M.; Kothari, Brianne Hood; Busse, Jessica; Brennan, Eileen

2012-01-01

This article describes the development, implementation, and outcomes of a pilot intervention designed to enhance preschool programs' ability to support children's social-emotional development. Working with two Head Start programs, the intervention included (1) restructuring existing early childhood mental health consultation services; (2) engaging…

Development and Evaluation of a Career Continuance Model for Company Grade Officers in the United States Army

DTIC Science & Technology

2011-03-01

causal inference (e.g., longitudinal designs , training designs that include matched control groups ). Given the importance of time in our model... quantitative results. We did, of course, do qualitative research as part of this project in the form of focus groups and interviews. There are a... nonequivalent group designs . In T. D. Cook & D. T. Campbell, D. T. Quasi-experimentation: Design and Analysis Issues for Field Settings. (pp. 147-205

Concepts for the development of light-weight composite structures for rotor burst containment

NASA Technical Reports Server (NTRS)

Holms, A. G.

1977-01-01

Based on published results on rotor burst containment with single materials, and on body armor using composite materials, a set of hypotheses is established as to what variables might control the design of a weight-efficient protective device. Based on modern concepts for the design and analysis of small optimum seeking experiments, a particular experiment for evaluating the hypotheses and materials was designed. The design and methods for the analysis of results are described.

Two different PCR approaches for universal diagnosis of brown rot and identification of Monilinia spp. in stone fruit trees.

PubMed

Gell, I; Cubero, J; Melgarejo, P

2007-12-01

To design a protocol for the universal diagnosis of brown rot by polymerase chain reaction (PCR) in plant material and subsequently Monilinia spp. identification. Primers for discrimination of Monilinia spp. from other fungal genera by PCR were designed following a ribosomal DNA analysis. Discrimination among species of Monilinia was subsequently achieved by developing primers using SCAR (Sequence Characterised Amplified Region) markers obtained after a random amplified polymorphic DNA study. In addition, an internal control (IC) based on the utilization of a mimic plasmid was designed to be used in the diagnostic protocol of brown rot to recognize false negatives due to the inhibition of PCR. The four sets of primers designed allowed detection and discrimination of all Monilinia spp. causing brown rot in fruit trees. Addition of an IC in each PCR reaction performed increased the reliability of the diagnostic protocol. The detection protocol presented here, that combined a set of universal primers and the inclusion of the plasmid pGMON as an IC for diagnosis of all Monilinia spp., and three sets of primers to discriminate the most important species of Monilinia, could be an useful and valuable tool for epidemiological studies. The method developed could be used in programmes to avoid the spread and introduction of this serious disease in new areas.

Fault Management Design Strategies

NASA Technical Reports Server (NTRS)

Day, John C.; Johnson, Stephen B.

2014-01-01

Development of dependable systems relies on the ability of the system to determine and respond to off-nominal system behavior. Specification and development of these fault management capabilities must be done in a structured and principled manner to improve our understanding of these systems, and to make significant gains in dependability (safety, reliability and availability). Prior work has described a fundamental taxonomy and theory of System Health Management (SHM), and of its operational subset, Fault Management (FM). This conceptual foundation provides a basis to develop framework to design and implement FM design strategies that protect mission objectives and account for system design limitations. Selection of an SHM strategy has implications for the functions required to perform the strategy, and it places constraints on the set of possible design solutions. The framework developed in this paper provides a rigorous and principled approach to classifying SHM strategies, as well as methods for determination and implementation of SHM strategies. An illustrative example is used to describe the application of the framework and the resulting benefits to system and FM design and dependability.

On Adaptive Extended Compatibility Changing Type of Product Design Strategy

NASA Astrophysics Data System (ADS)

Wenwen, Jiang; Zhibin, Xie

The article uses research ways of Enterprise localization and enterprise's development course to research strategy of company's product design and development. It announces at different stages for development, different kinds of enterprises will adopt product design and development policies of different modes. It also announces close causality between development course of company and central technology and product. The result indicated enterprises in leading position in market, technology and brand adopt pioneer strategy type of product research and development. These enterprise relying on the large-scale leading enterprise offering a complete set service adopts the passively duplicating type tactic of product research and development. Some enterprise in part of advantage in technology, market, management or brand adopt following up strategy of product research and development. The enterprises with relative advantage position adopt the strategy of technology applied taking optimizing services as centre in product research and development in fields of brand culture and market service.

Organizational Influences on the University Electronic Library.

ERIC Educational Resources Information Center

Davies, Clare

1997-01-01

Reviews the literature on the development of full-text electronic libraries in the academic setting. Organizational factors can have impact on electronic library development and ultimate usability. Topics include strategic management, planning and implementation; system specification and design; document provision; user support and training; and…

Human Development Student Modules.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This set of 61 student learning modules deals with various topics pertaining to human development. The modules, which are designed for use in performance-based vocational education programs, each contain the following components: an introduction for the student, a performance objective, a variety of learning activities, content information, a…

Multivariate analysis in the pharmaceutical industry: enabling process understanding and improvement in the PAT and QbD era.

PubMed

Ferreira, Ana P; Tobyn, Mike

2015-01-01

In the pharmaceutical industry, chemometrics is rapidly establishing itself as a tool that can be used at every step of product development and beyond: from early development to commercialization. This set of multivariate analysis methods allows the extraction of information contained in large, complex data sets thus contributing to increase product and process understanding which is at the core of the Food and Drug Administration's Process Analytical Tools (PAT) Guidance for Industry and the International Conference on Harmonisation's Pharmaceutical Development guideline (Q8). This review is aimed at providing pharmaceutical industry professionals an introduction to multivariate analysis and how it is being adopted and implemented by companies in the transition from "quality-by-testing" to "quality-by-design". It starts with an introduction to multivariate analysis and the two methods most commonly used: principal component analysis and partial least squares regression, their advantages, common pitfalls and requirements for their effective use. That is followed with an overview of the diverse areas of application of multivariate analysis in the pharmaceutical industry: from the development of real-time analytical methods to definition of the design space and control strategy, from formulation optimization during development to the application of quality-by-design principles to improve manufacture of existing commercial products.

Community-based participatory research and user-centered design in a diabetes medication information and decision tool.

PubMed

Henderson, Vida A; Barr, Kathryn L; An, Lawrence C; Guajardo, Claudia; Newhouse, William; Mase, Rebecca; Heisler, Michele

2013-01-01

Together, community-based participatory research (CBPR), user-centered design (UCD), and health information technology (HIT) offer promising approaches to improve health disparities in low-resource settings. This article describes the application of CBPR and UCD principles to the development of iDecide/Decido, an interactive, tailored, web-based diabetes medication education and decision support tool delivered by community health workers (CHWs) to African American and Latino participants with diabetes in Southwest and Eastside Detroit. The decision aid is offered in English or Spanish and is delivered on an iPad in participants' homes. The overlapping principles of CBPR and UCD used to develop iDecide/Decido include a user-focused or community approach, equitable academic and community partnership in all study phases, an iterative development process that relies on input from all stakeholders, and a program experience that is specified, adapted, and implemented with the target community. Collaboration between community members, researchers, and developers is especially evident in the program's design concept, animations, pictographs, issue cards, goal setting, tailoring, and additional CHW tools. The principles of CBPR and UCD can be successfully applied in developing health information tools that are easy to use and understand, interactive, and target health disparities.

Development of real-time software environments for NASA's modern telemetry systems

NASA Technical Reports Server (NTRS)

Horner, Ward; Sabia, Steve

1989-01-01

An effort has been made to maintain maximum performance and flexibility for NASA-Goddard's VLSI telemetry system elements through the development of two real-time systems: (1) the Base System Environment, which supports generic system integration and furnishes the basic porting of various manufacturers' cards, and (2) the Modular Environment for Data Systems, which supports application-specific developments and furnishes designers with a set of tested generic library functions that can be employed to speed up the development of such application-specific real-time codes. The performance goals and design rationale for these two systems are discussed.

The ITER bolometer diagnostic: Status and plansa)

NASA Astrophysics Data System (ADS)

Meister, H.; Giannone, L.; Horton, L. D.; Raupp, G.; Zeidner, W.; Grunda, G.; Kalvin, S.; Fischer, U.; Serikov, A.; Stickel, S.; Reichle, R.

2008-10-01

A consortium consisting of four EURATOM Associations has been set up to develop the project plan for the full development of the ITER bolometer diagnostic and to continue urgent R&D activities. An overview of the current status is given, including detector development, line-of-sight optimization, performance analysis as well as the design of the diagnostic components and their integration in ITER. This is complemented by the presentation of plans for future activities required to successfully implement the bolometer diagnostic, ranging from the detector development over diagnostic design and prototype testing to RH tools for calibration.

Developing teaching process for enhancing students' mathematical problem solving in the 21st century through STEM education

NASA Astrophysics Data System (ADS)

Prawvichien, Sutthaporn; Siripun, Kulpatsorn; Yuenyong, Chokchai

2018-01-01

The STEM education could provide the context for students' learning in the 21st century. The Mathematical problem solving requires a context which simulates real life in order to give students experience of the power of mathematics in the world around them. This study aimed to develop the teaching process for enhancing students' mathematical problem solving in the 21st century through STEM education. The paper will clarify the STEM learning activities about graph theories regarding on the 6 steps of engineering design process. These include identify a challenge, exploring ideas, designing and planning, doing and developing, test and evaluate, and present the solution. The learning activities will start from the Identify a challenge stage which provides the northern part of Thailand flooding situation in order to set the students' tasks of develop the solutions of providing the routes of fastest moving people away from the flooding areas. The explore ideas stage will provide activities for enhance students to learn some knowledge based for designing the possible solutions. This knowledge based could focus on measuring, geometry, graph theory, and mathematical process. The design and plan stage will ask students to model the city based on the map and then provide the possible routes. The doing and development stage will ask students to develop the routes based on their possible model. The test and evaluating will ask students to clarify how to test and evaluate the possible routes, and then test it. The present solution stage will ask students to present the whole process of designing routes. Then, the paper will discuss how these learning activities could enhance students' mathematical problem solving. The paper may have implication for STEM education in school setting.

Constellation Program Design Challenges as Opportunities for Educational Outreach and Workforce Development for Senior Design Classes

NASA Technical Reports Server (NTRS)

Trevino, Robert C.

2009-01-01

The Texas Space Grant Consortium (TSGC) and the Exploration Systems Mission Directorate (ESMD) both have programs that present design challenges for university senior design classes that offer great opportunities for educational outreach and workforce development. These design challenges have been identified by NASA engineers and researchers as real design problems faced by the Constellation Program in its exploration missions and architecture. Student teams formed in their senior design class select and then work on a design challenge for one or two semesters. The senior design class follows the requirements set by their university, but it must also comply with the Accreditation Board for Engineering and Technology (ABET) in order to meet the class academic requirements. Based on a one year fellowship at a TSGC university under the NASA Administrator's Fellowship Program (NAFP) and several years of experience, results and metrics are presented on the NASA Design Challenge Program.

Advanced interactive display formats for terminal area traffic control

NASA Technical Reports Server (NTRS)

Grunwald, Arthur J.

1995-01-01

The basic design considerations for perspective Air Traffic Control displays are described. A software framework has been developed for manual viewing parameter setting (MVPS) in preparation for continued, ongoing developments on automated viewing parameter setting (AVPS) schemes. The MVPS system is based on indirect manipulation of the viewing parameters. Requests for changes in viewing parameter setting are entered manually by the operator by moving viewing parameter manipulation pointers on the screen. The motion of these pointers, which are an integral part of the 3-D scene, is limited to the boundaries of screen. This arrangement has been chosen, in order to preserve the correspondence between the new and the old viewing parameter setting, a feature which contributes to preventing spatial disorientation of the operator. For all viewing operations, e.g. rotation, translation and ranging, the actual change is executed automatically by the system, through gradual transitions with an exponentially damped, sinusoidal velocity profile, in this work referred to as 'slewing' motions. The slewing functions, which eliminate discontinuities in the viewing parameter changes, are designed primarily for enhancing the operator's impression that he, or she, is dealing with an actually existing physical system, rather than an abstract computer generated scene. Current, ongoing efforts deal with the development of automated viewing parameter setting schemes. These schemes employ an optimization strategy, aimed at identifying the best possible vantage point, from which the Air Traffic Control scene can be viewed, for a given traffic situation.

Study of optical design of Blu-ray pickup head system with a liquid crystal element.

PubMed

Fang, Yi-Chin; Yen, Chih-Ta; Hsu, Jui-Hsin

2014-10-10

This paper proposes a newly developed optical design and an active compensation method for a Blu-ray pickup head system with a liquid crystal (LC) element. Different from traditional pickup lens design, this new optical design delivers performance as good as the conventional one but has more room for tolerance control, which plays a role in antishaking devices, such as portable Blu-ray players. A hole-pattern electrode and LC optics with external voltage input were employed to generate a symmetric nonuniform electrical field in the LC layer that directs LC molecules into the appropriate gradient refractive index distribution, resulting in the convergence or divergence of specific light beams. LC optics deliver fast and, most importantly, active compensation through optical design when errors occur. Simulations and tolerance analysis were conducted using Code V software, including various tolerance analyses, such as defocus, tilt, and decenter, and their related compensations. Two distinct Blu-ray pickup head system designs were examined in this study. In traditional Blu-ray pickup head system designs, the aperture stop is always set on objective lenses. In the study, the aperture stop is on the LC lens as a newly developed lens. The results revealed that an optical design with aperture stop set on the LC lens as an active compensation device successfully eliminated up to 57% of coma aberration compared with traditional optical designs so that this pickup head lens design will have more space for tolerance control.

Investigations of quantum heuristics for optimization

NASA Astrophysics Data System (ADS)

Rieffel, Eleanor; Hadfield, Stuart; Jiang, Zhang; Mandra, Salvatore; Venturelli, Davide; Wang, Zhihui

We explore the design of quantum heuristics for optimization, focusing on the quantum approximate optimization algorithm, a metaheuristic developed by Farhi, Goldstone, and Gutmann. We develop specific instantiations of the of quantum approximate optimization algorithm for a variety of challenging combinatorial optimization problems. Through theoretical analyses and numeric investigations of select problems, we provide insight into parameter setting and Hamiltonian design for quantum approximate optimization algorithms and related quantum heuristics, and into their implementation on hardware realizable in the near term.

CFD Multiphysics Tool

NASA Technical Reports Server (NTRS)

Perrell, Eric R.

2005-01-01

The recent bold initiatives to expand the human presence in space require innovative approaches to the design of propulsion systems whose underlying technology is not yet mature. The space propulsion community has identified a number of candidate concepts. A short list includes solar sails, high-energy-density chemical propellants, electric and electromagnetic accelerators, solar-thermal and nuclear-thermal expanders. For each of these, the underlying physics are relatively well understood. One could easily cite authoritative texts, addressing both the governing equations, and practical solution methods for, e.g. electromagnetic fields, heat transfer, radiation, thermophysics, structural dynamics, particulate kinematics, nuclear energy, power conversion, and fluid dynamics. One could also easily cite scholarly works in which complete equation sets for any one of these physical processes have been accurately solved relative to complex engineered systems. The Advanced Concepts and Analysis Office (ACAO), Space Transportation Directorate, NASA Marshall Space Flight Center, has recently released the first alpha version of a set of computer utilities for performing the applicable physical analyses relative to candidate deep-space propulsion systems such as those listed above. PARSEC, Preliminary Analysis of Revolutionary in-Space Engineering Concepts, enables rapid iterative calculations using several physics tools developed in-house. A complete cycle of the entire tool set takes about twenty minutes. PARSEC is a level-zero/level-one design tool. For PARSEC s proof-of-concept, and preliminary design decision-making, assumptions that significantly simplify the governing equation sets are necessary. To proceed to level-two, one wishes to retain modeling of the underlying physics as close as practical to known applicable first principles. This report describes results of collaboration between ACAO, and Embry-Riddle Aeronautical University (ERAU), to begin building a set of level-two design tools for PARSEC. The "CFD Multiphysics Tool" will be the propulsive element of the tool set. The name acknowledges that space propulsion performance assessment is primarily a fluid mechanics problem. At the core of the CFD Multiphysics Tool is an open-source CFD code, HYP, under development at ERAU. ERAU is renowned for its undergraduate degree program in Aerospace Engineering the largest in the nation. The strength of the program is its applications-oriented curriculum, which culminates in one of three two-course Engineering Design sequences: Aerospace Propulsion, Spacecraft, or Aircraft. This same philosophy applies to the HYP Project, albeit with fluid physics modeling commensurate with graduate research. HYP s purpose, like the Multiphysics Tool s, is to enable calculations of real (three-dimensional; geometrically complex; intended for hardware development) applications of high speed and propulsive fluid flows.

Human Integration Design Processes (HIDP)

NASA Technical Reports Server (NTRS)

Boyer, Jennifer

2014-01-01

The purpose of the Human Integration Design Processes (HIDP) document is to provide human-systems integration design processes, including methodologies and best practices that NASA has used to meet human systems and human rating requirements for developing crewed spacecraft. HIDP content is framed around human-centered design methodologies and processes in support of human-system integration requirements and human rating. NASA-STD-3001, Space Flight Human-System Standard, is a two-volume set of National Aeronautics and Space Administration (NASA) Agency-level standards established by the Office of the Chief Health and Medical Officer, directed at minimizing health and performance risks for flight crews in human space flight programs. Volume 1 of NASA-STD-3001, Crew Health, sets standards for fitness for duty, space flight permissible exposure limits, permissible outcome limits, levels of medical care, medical diagnosis, intervention, treatment and care, and countermeasures. Volume 2 of NASASTD- 3001, Human Factors, Habitability, and Environmental Health, focuses on human physical and cognitive capabilities and limitations and defines standards for spacecraft (including orbiters, habitats, and suits), internal environments, facilities, payloads, and related equipment, hardware, and software with which the crew interfaces during space operations. The NASA Procedural Requirements (NPR) 8705.2B, Human-Rating Requirements for Space Systems, specifies the Agency's human-rating processes, procedures, and requirements. The HIDP was written to share NASA's knowledge of processes directed toward achieving human certification of a spacecraft through implementation of human-systems integration requirements. Although the HIDP speaks directly to implementation of NASA-STD-3001 and NPR 8705.2B requirements, the human-centered design, evaluation, and design processes described in this document can be applied to any set of human-systems requirements and are independent of reference missions. The HIDP is a reference document that is intended to be used during the development of crewed space systems and operations to guide human-systems development process activities.

Quiet aircraft design and operational characteristics

NASA Technical Reports Server (NTRS)

Hodge, Charles G.

1991-01-01

The application of aircraft noise technology to the design and operation of aircraft is discussed. Areas of discussion include the setting of target airplane noise levels, operational considerations and their effect on noise, and the sequencing and timing of the design and development process. Primary emphasis is placed on commercial transport aircraft of the type operated by major airlines. Additionally, noise control engineering of other types of aircraft is briefly discussed.

Setting Engineering Students up for Success in the 21st Century: Integrating Gamification and Crowdsourcing into a CDIO-Based Web Design Course

ERIC Educational Resources Information Center

Song, Donglei; Tavares, Adriano; Pinto, Sandro; Xu, Hao

2017-01-01

Over the past few decades, many researchers have tested course designs that may better engage students in developing countries, accommodate for Millennials' desires to learn and teach at will, and teach students the skills they need for their first jobs. The vision of this paper for a web design course seeks to address these issues for engineering…

Some problems with the design of self-learning management systems

NASA Technical Reports Server (NTRS)

Flikop, Ziny

1992-01-01

In this paper some problems in the design of management systems for complex objects are discussed. Considering the absence of adequate models and the fact that human expertise in the management of non-stationary objects becomes obsolete quickly, the use of self-learning together with a two-step optimization of on-line control rules is suggested. To prepare for the object analysis, a set of definitions has been proposed. Traditional and fuzzy sets approaches are used in the analysis. To decrease the reaction time of the control system, we propose the development of control rules without feedback.

Transient response measurements on a satellite system

NASA Technical Reports Server (NTRS)

Nanevicz, J. E.; Adamo, R. C.

1977-01-01

A set of instruments designed to detect the occurance of electrical breakdown was flown on a synchronous-orbit satellite. The LeRC sensors were installed on cables inside the vehicle. Accordingly, they respond to signals coupled into the satellite wiring system. The SRI sensors were located on the exterior of the vehicle and detected the RF noise pulses associated with surface breakdowns. The results of the earlier SRI program are being used to design and develop a set of intrumentation suitable for inclusion as a general piggy-back package for the detection of the onset of satellite charging and breakdowns on synchronous orbit satellites.

Review of Estelle and LOTOS with respect to critical computer applications

NASA Technical Reports Server (NTRS)

Bown, Rodney L.

1991-01-01

Man rated NASA space vehicles seem to represent a set of ultimate critical computer applications. These applications require a high degree of security, integrity, and safety. A variety of formal and/or precise modeling techniques are becoming available for the designer of critical systems. The design phase of the software engineering life cycle includes the modification of non-development components. A review of the Estelle and LOTOS formal description languages is presented. Details of the languages and a set of references are provided. The languages were used to formally describe some of the Open System Interconnect (OSI) protocols.

International Docking Standard (IDSS) Interface Definition Document (IDD) . E; Revision

NASA Technical Reports Server (NTRS)

Kelly, Sean M.; Cryan, Scott P.

2016-01-01

This International Docking System Standard (IDSS) Interface Definition Document (IDD) is the result of a collaboration by the International Space Station membership to establish a standard docking interface to enable on-orbit crew rescue operations and joint collaborative endeavors utilizing different spacecraft. This IDSS IDD details the physical geometric mating interface and design loads requirements. The physical geometric interface requirements must be strictly followed to ensure physical spacecraft mating compatibility. This includes both defined components and areas that are void of components. The IDD also identifies common design parameters as identified in section 3.0, e.g., docking initial conditions and vehicle mass properties. This information represents a recommended set of design values enveloping a broad set of design reference missions and conditions, which if accommodated in the docking system design, increases the probability of successful docking between different spacecraft. This IDD does not address operational procedures or off-nominal situations, nor does it dictate implementation or design features behind the mating interface. It is the responsibility of the spacecraft developer to perform all hardware verification and validation, and to perform final docking analyses to ensure the needed docking performance and to develop the final certification loads for their application. While there are many other critical requirements needed in the development of a docking system such as fault tolerance, reliability, and environments (e.g. vibration, etc.), it is not the intent of the IDSS IDD to mandate all of these requirements; these requirements must be addressed as part of the specific developer's unique program, spacecraft and mission needs. This approach allows designers the flexibility to design and build docking mechanisms to their unique program needs and requirements. The purpose of the IDSS IDD is to provide basic common design parameters to allow developers to independently design compatible docking systems. The IDSS is intended for uses ranging from crewed to autonomous space vehicles, and from Low Earth Orbit (LEO) to deep-space exploration missions.The purpose of the IDSS IDD is to provide basic common design parameters to allow developers to independently design compatible docking systems. The IDSS is intended for uses ranging from crewed to autonomous space vehicles, and from Low Earth Orbit (LEO) to deep-space exploration missions. The purpose of the IDSS IDD is to provide basic common design parameters to allow developers to independently design compatible docking systems. The IDSS is intended for uses ranging from crewed to autonomous space vehicles, and from Low Earth Orbit (LEO) to deep-space exploration missions.

Design and development of Building energy simulation Software for prefabricated cabin type of industrial building (PCES)

NASA Astrophysics Data System (ADS)

Zhang, Jun; Li, Ri Yi

2018-06-01

Building energy simulation is an important supporting tool for green building design and building energy consumption assessment, At present, Building energy simulation software can't meet the needs of energy consumption analysis and cabinet level micro environment control design of prefabricated building. thermal physical model of prefabricated building is proposed in this paper, based on the physical model, the energy consumption calculation software of prefabricated cabin building(PCES) is developed. we can achieve building parameter setting, energy consumption simulation and building thermal process and energy consumption analysis by PCES.

The use of structural analysis to develop antecedent-based interventions for students with autism.

PubMed

Stichter, Janine P; Randolph, Jena K; Kay, Denise; Gage, Nicholas

2009-06-01

Evidence continues to maintain that the use of antecedent variables (i.e., instructional practices, and environmental characteristics) increase prosocial and adaptive behaviors of students with disabilities (e.g., Kern et al. in J Appl Behav Anal 27(1):7-19, 1994; Stichter et al. in Behav Disord 30:401-418, 2005). This study extends the literature by systematically utilizing practitioner-implemented structural analyzes within school settings to determine antecedent variables affecting the prosocial behavior of students with autism. Optimal antecedents were combined into intervention packages and assessed utilizing a multiple baseline design across settings. All three students demonstrated improvement across all three settings. Rates of engagement and social interaction were obtained from classroom peers to serve as benchmark data. Findings indicate that practitioners can implement structural analyzes and design corresponding interventions for students with ASD within educational settings.

Numerical aerodynamic simulation facility. Preliminary study extension

NASA Technical Reports Server (NTRS)

1978-01-01

The production of an optimized design of key elements of the candidate facility was the primary objective of this report. This was accomplished by effort in the following tasks: (1) to further develop, optimize and describe the function description of the custom hardware; (2) to delineate trade off areas between performance, reliability, availability, serviceability, and programmability; (3) to develop metrics and models for validation of the candidate systems performance; (4) to conduct a functional simulation of the system design; (5) to perform a reliability analysis of the system design; and (6) to develop the software specifications to include a user level high level programming language, a correspondence between the programming language and instruction set and outline the operation system requirements.

Development of advanced lightweight containment systems

NASA Technical Reports Server (NTRS)

Stotler, C.

1981-01-01

Parametric type data were obtained on advanced lightweight containment systems. These data were used to generate design methods and procedures necessary for the successful development of such systems. The methods were then demonstrated through the design of a lightweight containment system for a CF6 size engine. The containment concept evaluated consisted basically of a lightweight structural sandwich shell wrapped with dry Kevlar cloth. The initial testing was directed towards the determination of the amount of Kevlar required to result in threshold containment for a specific set of test conditions. A relationship was then developed between the thickness required and the energy of the released blade so that the data could be used to design for conditions other than those tested.

Experience-based co-design in an adult psychological therapies service.

PubMed

Cooper, Kate; Gillmore, Chris; Hogg, Lorna

2016-01-01

Experience-based co-design (EBCD) is a methodology for service improvement and development, which puts service-user voices at the heart of improving health services. The aim of this paper was to implement the EBCD methodology in a mental health setting, and to investigate the challenges which arise during this process. In order to achieve this, a modified version of the EBCD methodology was undertaken, which involved listening to the experiences of the people who work in and use the mental health setting and sharing these experiences with the people who could effect change within the service, through collaborative work between service-users, staff and managers. EBCD was implemented within the mental health setting and was well received by service-users, staff and stakeholders. A number of modifications were necessary in this setting, for example high levels of support available to participants. It was concluded that EBCD is a suitable methodology for service improvement in mental health settings.

Interchangeable end effector tools utilized on the protoflight manipulator arm

NASA Technical Reports Server (NTRS)

1987-01-01

A subset of teleoperator and effector tools was designed, fabricated, delivered and successfully demonstrated on the Marshall Space Flight Center (MSFC) protoflight manipulator arm (PFMA). The tools delivered included a rotary power tool with interchangeable collets and two fluid coupling mate/demate tools; one for a Fairchild coupling and the other for a Purolator coupling. An electrical interface connector was also provided for the rotary power tool. A tool set, from which the subset was selected, for performing on-orbit satellite maintenance was identified and conceptionally designed. Maintenance requirements were synthesized, evaluated and prioritized to develop design requirements for a set of end effector tools representative of those needed to provide on-orbit maintenance of satellites to be flown in the 1986 to 2000 timeframe.

Transportable GPU (General Processor Units) chip set technology for standard computer architectures

NASA Astrophysics Data System (ADS)

Fosdick, R. E.; Denison, H. C.

1982-11-01

The USAFR-developed GPU Chip Set has been utilized by Tracor to implement both USAF and Navy Standard 16-Bit Airborne Computer Architectures. Both configurations are currently being delivered into DOD full-scale development programs. Leadless Hermetic Chip Carrier packaging has facilitated implementation of both architectures on single 41/2 x 5 substrates. The CMOS and CMOS/SOS implementations of the GPU Chip Set have allowed both CPU implementations to use less than 3 watts of power each. Recent efforts by Tracor for USAF have included the definition of a next-generation GPU Chip Set that will retain the application-proven architecture of the current chip set while offering the added cost advantages of transportability across ISO-CMOS and CMOS/SOS processes and across numerous semiconductor manufacturers using a newly-defined set of common design rules. The Enhanced GPU Chip Set will increase speed by an approximate factor of 3 while significantly reducing chip counts and costs of standard CPU implementations.

Safe design of healthcare facilities

PubMed Central

Reiling, J

2006-01-01

The physical environment has a significant impact on health and safety; however, hospitals have not been designed with the explicit goal of enhancing patient safety through facility design. In April 2002, St Joseph's Community Hospital of West Bend, a member of SynergyHealth, brought together leaders in healthcare and systems engineering to develop a set of safety‐driven facility design recommendations and principles that would guide the design of a new hospital facility focused on patient safety. By introducing safety‐driven innovations into the facility design process, environmental designers and healthcare leaders will be able to make significant contributions to patient safety. PMID:17142606

Healthy eating design guidelines for school architecture.

PubMed

Huang, Terry T-K; Sorensen, Dina; Davis, Steven; Frerichs, Leah; Brittin, Jeri; Celentano, Joseph; Callahan, Kelly; Trowbridge, Matthew J

2013-01-01

We developed a new tool, Healthy Eating Design Guidelines for School Architecture, to provide practitioners in architecture and public health with a practical set of spatially organized and theory-based strategies for making school environments more conducive to learning about and practicing healthy eating by optimizing physical resources and learning spaces. The design guidelines, developed through multidisciplinary collaboration, cover 10 domains of the school food environment (eg, cafeteria, kitchen, garden) and 5 core healthy eating design principles. A school redesign project in Dillwyn, Virginia, used the tool to improve the schools' ability to adopt a healthy nutrition curriculum and promote healthy eating. The new tool, now in a pilot version, is expected to evolve as its components are tested and evaluated through public health and design research.

Development of a fast, lean and agile direct pelletization process using experimental design techniques.

PubMed

Politis, Stavros N; Rekkas, Dimitrios M

2017-04-01

A novel hot melt direct pelletization method was developed, characterized and optimized, using statistical thinking and experimental design tools. Mixtures of carnauba wax (CW) and HPMC K100M were spheronized using melted gelucire 50-13 as a binding material (BM). Experimentation was performed sequentially; a fractional factorial design was set up initially to screen the factors affecting the process, namely spray rate, quantity of BM, rotor speed, type of rotor disk, lubricant-glidant presence, additional spheronization time, powder feeding rate and quantity. From the eight factors assessed, three were further studied during process optimization (spray rate, quantity of BM and powder feeding rate), at different ratios of the solid mixture of CW and HPMC K100M. The study demonstrated that the novel hot melt process is fast, efficient, reproducible and predictable. Therefore, it can be adopted in a lean and agile manufacturing setting for the production of flexible pellet dosage forms with various release rates easily customized between immediate and modified delivery.

How large a training set is needed to develop a classifier for microarray data?

PubMed

Dobbin, Kevin K; Zhao, Yingdong; Simon, Richard M

2008-01-01

A common goal of gene expression microarray studies is the development of a classifier that can be used to divide patients into groups with different prognoses, or with different expected responses to a therapy. These types of classifiers are developed on a training set, which is the set of samples used to train a classifier. The question of how many samples are needed in the training set to produce a good classifier from high-dimensional microarray data is challenging. We present a model-based approach to determining the sample size required to adequately train a classifier. It is shown that sample size can be determined from three quantities: standardized fold change, class prevalence, and number of genes or features on the arrays. Numerous examples and important experimental design issues are discussed. The method is adapted to address ex post facto determination of whether the size of a training set used to develop a classifier was adequate. An interactive web site for performing the sample size calculations is provided. We showed that sample size calculations for classifier development from high-dimensional microarray data are feasible, discussed numerous important considerations, and presented examples.

Design and Development of an Institutional Repository at the Indian Institute of Technology Kharagpur

ERIC Educational Resources Information Center

Sutradhar, B.

2006-01-01

Purpose: To describe how an institutional repository (IR) was set up, using open source software, at the Indian Institute of Technology (IIT) in Kharagpur. Members of the IIT can publish their research documents in the IR for online access as well as digital preservation. Material in this IR includes instructional materials, records, data sets,…

The Interplay of Space, Place and Identity: Transforming Our Learning Experiences in an Outdoor Setting

ERIC Educational Resources Information Center

Cassidy, Alice L. E. V.; Wright, W. Alan; Strean, William B.; Watson, Gavan P. L.

2015-01-01

In this paper, we use a day-long professional development workshop for higher education faculty conducted in an outdoor setting as the starting point for an examination of the value of such activities. We explore the potential benefits, in terms of learning and holistic well-being, of educational activities designed to provide participants with…

Increasing the Transfer of Simulation Technology from R&D into School Settings: An Approach to Evaluation from Overarching Vision to Individual Artifact in Education

ERIC Educational Resources Information Center

Blasi, Laura; Alfonso, Berta

2006-01-01

Building and evaluating artifacts specifically for K-12 education, technologists committed to design sciences are needed along with an approach to evaluation increasing the systemic transfer from research and development into school settings. The authors describe THE VIRTUAL LAB scanning electronic microscope simulation, including (a) its…

Artful Dodgers: An Arts Education Research Project in Early Education Settings

ERIC Educational Resources Information Center

Hayes, Nóirín; Maguire, Jackie; Corcoran, Lucie; O'Sullivan, Carmel

2017-01-01

Artful Dodgers is an arts education project developed by two artists and delivered in two early years settings located in two areas of urban disadvantage. It is a music and visual arts programme designed and implemented with early years teachers of children aged 3-5 years. It explored whether the provision of high-quality arts experiences could…

Evaluating the Use of Synoptic Assessment to Engage and Develop Lower Level Higher Education Students within a Further Education Setting

ERIC Educational Resources Information Center

Southall, Jane; Wason, Hilary

2016-01-01

Engaging less academically qualified Higher Education students being taught within a Further Education setting, who have weaker study skills and little experience of independent learning, is challenging. Confidence and motivation levels are often low and they feel overwhelmed. Effective assessment design is crucial and needs to capitalise on…

Students Learning to Program by Developing Games: Results of a Year-Long Project in Primary School Settings

ERIC Educational Resources Information Center

Fokides, Emmanuel

2017-01-01

Aim/Purpose: The purpose of this study was to examine whether the authoring of computer games in a mainstream primary school setting can support the learning of game design and programming concepts. Background: Despite the benefits for students when they learn how to program and the significant body of research regarding this matter, these…

[siRNAs with high specificity to the target: a systematic design by CRM algorithm].

PubMed

Alsheddi, T; Vasin, L; Meduri, R; Randhawa, M; Glazko, G; Baranova, A

2008-01-01

'Off-target' silencing effect hinders the development of siRNA-based therapeutic and research applications. Common solution to this problem is an employment of the BLAST that may miss significant alignments or an exhaustive Smith-Waterman algorithm that is very time-consuming. We have developed a Comprehensive Redundancy Minimizer (CRM) approach for mapping all unique sequences ("targets") 9-to-15 nt in size within large sets of sequences (e.g. transcriptomes). CRM outputs a list of potential siRNA candidates for every transcript of the particular species. These candidates could be further analyzed by traditional "set-of-rules" types of siRNA designing tools. For human, 91% of transcripts are covered by candidate siRNAs with kernel targets of N = 15. We tested our approach on the collection of previously described experimentally assessed siRNAs and found that the correlation between efficacy and presence in CRM-approved set is significant (r = 0.215, p-value = 0.0001). An interactive database that contains a precompiled set of all human siRNA candidates with minimized redundancy is available at http://129.174.194.243. Application of the CRM-based filtering minimizes potential "off-target" silencing effects and could improve routine siRNA applications.

Layout-aware simulation of soft errors in sub-100 nm integrated circuits

NASA Astrophysics Data System (ADS)

Balbekov, A.; Gorbunov, M.; Bobkov, S.

2016-12-01

Single Event Transient (SET) caused by charged particle traveling through the sensitive volume of integral circuit (IC) may lead to different errors in digital circuits in some cases. In technologies below 180 nm, a single particle can affect multiple devices causing multiple SET. This fact adds the complexity to fault tolerant devices design, because the schematic design techniques become useless without their layout consideration. The most common layout mitigation technique is a spatial separation of sensitive nodes of hardened circuits. Spatial separation decreases the circuit performance and increases power consumption. Spacing should thus be reasonable and its scaling follows the device dimensions' scaling trend. This paper presents the development of the SET simulation approach comprised of SPICE simulation with "double exponent" current source as SET model. The technique uses layout in GDSII format to locate nearby devices that can be affected by a single particle and that can share the generated charge. The developed software tool automatizes multiple simulations and gathers the produced data to present it as the sensitivity map. The examples of conducted simulations of fault tolerant cells and their sensitivity maps are presented in this paper.

Ready--Fire--Aim: HRD or HRU?

ERIC Educational Resources Information Center

Lewis, James P.

1981-01-01

A personnel development plan is suggested in which training specialists (1) help employees with career development, (2) change the job or transfer employees to a more suitable job, or (3) go through role negotiation, goal setting, or some other exercise designed to create a new job perspective. (CT)

Low Power Magnetic Bearing Design for High Speed Rotating Machinery

NASA Technical Reports Server (NTRS)

Allaire, P. E.; Maslen, E. H.; Humphris, R. R.; Sortore, C. K.; Studer, P. A.

1992-01-01

Magnetic suspension technology has advanced to the point of being able to offer a number of advantages to a variety of applications in the rotating machinery and aerospace fields. One strong advantage is the decrease in power consumption. The design and construction of a set of permanent magnet biased, actively controlled magnetic bearing for a flexible rotor are presented. Both permanent magnets and electromagnets are used in a configuration which effectively provides the necessary fluxes in the appropriate air gaps, while simultaneously keeping the undesirable destabilizing forces to a minimum. The design includes two radial bearings and a thrust bearing. The theoretical development behind the design is briefly discussed. Experimental performance results for a set of operating prototype bearings is presented. The results include measurements of load capacity, bearing stiffness and damping, and the dynamic response of the rotor. With few exceptions, the experimental results matched very well with the predicted performance. The power consumption of these bearings was found to be significantly reduced from that for a comparable set of all electromagnetic bearings.

Tailoring Healthy Workplace Interventions to Local Healthcare Settings: A Complexity Theory-Informed Workplace of Well-Being Framework

PubMed Central

Brand, Sarah L.; Fleming, Lora E.; Wyatt, Katrina M.

2015-01-01

Many healthy workplace interventions have been developed for healthcare settings to address the consistently low scores of healthcare professionals on assessments of mental and physical well-being. Complex healthcare settings present challenges for the scale-up and spread of successful interventions from one setting to another. Despite general agreement regarding the importance of the local setting in affecting intervention success across different settings, there is no consensus on what it is about a local setting that needs to be taken into account to design healthy workplace interventions appropriate for different local settings. Complexity theory principles were used to understand a workplace as a complex adaptive system and to create a framework of eight domains (system characteristics) that affect the emergence of system-level behaviour. This Workplace of Well-being (WoW) framework is responsive and adaptive to local settings and allows a shared understanding of the enablers and barriers to behaviour change by capturing local information for each of the eight domains. We use the results of applying the WoW framework to one workplace, a UK National Health Service ward, to describe the utility of this approach in informing design of setting-appropriate healthy workplace interventions that create workplaces conducive to healthy behaviour change. PMID:26380358

Tailoring Healthy Workplace Interventions to Local Healthcare Settings: A Complexity Theory-Informed Workplace of Well-Being Framework.

PubMed

Brand, Sarah L; Fleming, Lora E; Wyatt, Katrina M

2015-01-01

Many healthy workplace interventions have been developed for healthcare settings to address the consistently low scores of healthcare professionals on assessments of mental and physical well-being. Complex healthcare settings present challenges for the scale-up and spread of successful interventions from one setting to another. Despite general agreement regarding the importance of the local setting in affecting intervention success across different settings, there is no consensus on what it is about a local setting that needs to be taken into account to design healthy workplace interventions appropriate for different local settings. Complexity theory principles were used to understand a workplace as a complex adaptive system and to create a framework of eight domains (system characteristics) that affect the emergence of system-level behaviour. This Workplace of Well-being (WoW) framework is responsive and adaptive to local settings and allows a shared understanding of the enablers and barriers to behaviour change by capturing local information for each of the eight domains. We use the results of applying the WoW framework to one workplace, a UK National Health Service ward, to describe the utility of this approach in informing design of setting-appropriate healthy workplace interventions that create workplaces conducive to healthy behaviour change.

Applying commodity chain analysis to changing modes of alcohol supply in a developing country.

PubMed

Jernigan, D H

2000-12-01

Development sociology has used global commodity chains as one way of analyzing the dynamics of power and profit-taking in globalized production networks made up of multiple firms and occurring in multiple national settings. A substantial portion of the alcohol supply in developing countries is now produced through such production networks. Particularly in the beer and spirits trade, a small number of transnational firms control networks of local producers, importers, advertisers and distributors. These networks serve to embed transnational or transnationally backed brands in the local culture, using the tools of market research, product design and marketing to influence local drinking practices. Case materials from Malaysia's beer industry help to illustrate how the transnational firms dominate in those links of the commodity chain in which monopoly or oligopoly control is most likely to be found: the design/recipe and marketing/advertising nodes. Their control of the commodity chains and extraction of monopoly or oligopoly profits from them places substantial resources and influence over drinking settings and practices in foreign hands. The impact of this influence on state efficacy and autonomy in setting alcohol policy is an important subject for future research on the creation and implementation of effective alcohol policies in developing societies.

Assessing the physical service setting: a look at emergency departments.

PubMed

Steinke, Claudia

2015-01-01

To determine the attributes of the physical setting that are important for developing a positive service climate within emergency departments and to validate a measure for assessing physical service design. The design of the physical setting is an important and contributing factor for creating a service climate in organizations. Service climate is defined as employee perceptions of the practices, procedures, and behaviors that get rewarded, supported, and expected with regard to customer service and customer service quality. There has been research conducted which identifies antecedents within organization that promotes a positive service climate which in turn creates service-oriented behaviors by employees toward clients. The antecedent of the physical setting and its impact on perceptions of service climate has been less commonly explored. Using the concept of the physical service setting (which may be defined as aspects of the physical, built environment that facilitate the delivery of quality service), attributes of the physical setting and their relationship with service climate were explored by means of a quantitative paper survey distributed to emergency nurses (n = 180) throughout a province in Canada. The results highlight the validity and reliability of six scales measuring the physical setting and its relation to service. Respondents gave low ratings to the physical setting of their departments, in addition to low ratings of service climate. Respondents feel that the design of the physical setting in the emergency departments where they work is not conducive to providing quality service to clients. Certain attributes of the physical setting were found to be significant in influencing perceptions of service climate, hence service quality, within the emergency department setting. © The Author(s) 2015.

Toward a molecular programming language for algorithmic self-assembly

NASA Astrophysics Data System (ADS)

Patitz, Matthew John

Self-assembly is the process whereby relatively simple components autonomously combine to form more complex objects. Nature exhibits self-assembly to form everything from microscopic crystals to living cells to galaxies. With a desire to both form increasingly sophisticated products and to understand the basic components of living systems, scientists have developed and studied artificial self-assembling systems. One such framework is the Tile Assembly Model introduced by Erik Winfree in 1998. In this model, simple two-dimensional square 'tiles' are designed so that they self-assemble into desired shapes. The work in this thesis consists of a series of results which build toward the future goal of designing an abstracted, high-level programming language for designing the molecular components of self-assembling systems which can perform powerful computations and form into intricate structures. The first two sets of results demonstrate self-assembling systems which perform infinite series of computations that characterize computably enumerable and decidable languages, and exhibit tools for algorithmically generating the necessary sets of tiles. In the next chapter, methods for generating tile sets which self-assemble into complicated shapes, namely a class of discrete self-similar fractal structures, are presented. Next, a software package for graphically designing tile sets, simulating their self-assembly, and debugging designed systems is discussed. Finally, a high-level programming language which abstracts much of the complexity and tedium of designing such systems, while preventing many of the common errors, is presented. The summation of this body of work presents a broad coverage of the spectrum of desired outputs from artificial self-assembling systems and a progression in the sophistication of tools used to design them. By creating a broader and deeper set of modular tools for designing self-assembling systems, we hope to increase the complexity which is attainable. These tools provide a solid foundation for future work in both the Tile Assembly Model and explorations into more advanced models.

Irish set dancing classes for people with Parkinson's disease: The needs of participants and dance teachers.

PubMed

Shanahan, Joanne; Bhriain, Orfhlaith Ní; Morris, Meg E; Volpe, Daniele; Clifford, Amanda M

2016-08-01

As the number of people diagnosed with Parkinson's disease increases, there is a need to develop initiatives that promote health and wellbeing and support self-management. Additionally, as exercise may slow physical decline, there is a need to develop methods that facilitate greater engagement with community-based exercise. The aim of this study is to examine the needs of (1) people with Parkinson's disease and (2) set dancing teachers to enable the development of participant-centred community set dance classes. A mixed methods study design was used. Two consensus group discussions using nominal group technique were held to (1) identify factors pertaining to the needs of people with Parkinson's disease from a set dance class and (2) the educational needs of set dancing teachers to enable them to teach set dancing to people with Parkinson's disease. Group discussions began with silent generation of ideas. A round-robin discussion and grouping of ideas into broader topic areas followed. Finally, participants ranked, by order of priority (1-5), the topic areas developed. Final data analysis involved summation of participants' ranking scores for each topic area. Rich information on the needs of people with Parkinson's disease from a dance class and the educational guidance sought by set dancing teachers was gathered. Topic areas developed include "teaching method" for set dances and "class environment". Accessing community exercise programmes is important for this population. The results of this study will inform the development of an educational resource on Parkinson's disease for set dancing teachers. This resource may facilitate a larger number of teachers to establish sustainable community set dancing classes for people with Parkinson's disease. Copyright © 2016 Elsevier Ltd. All rights reserved.

Space station Simulation Computer System (SCS) study for NASA/MSFC. Volume 4: Conceptual design report

NASA Technical Reports Server (NTRS)

1989-01-01

The Simulation Computer System (SCS) is the computer hardware, software, and workstations that will support the Payload Training Complex (PTC) at Marshall Space Flight Center (MSFC). The PTC will train the space station payload scientists, station scientists, and ground controllers to operate the wide variety of experiments that will be onboard the Space Station Freedom. In the first step of this task, a methodology was developed to ensure that all relevant design dimensions were addressed, and that all feasible designs could be considered. The development effort yielded the following method for generating and comparing designs in task 4: (1) Extract SCS system requirements (functions) from the system specification; (2) Develop design evaluation criteria; (3) Identify system architectural dimensions relevant to SCS system designs; (4) Develop conceptual designs based on the system requirements and architectural dimensions identified in step 1 and step 3 above; (5) Evaluate the designs with respect to the design evaluation criteria developed in step 2 above. The results of the method detailed in the above 5 steps are discussed. The results of the task 4 work provide the set of designs which two or three candidate designs are to be selected by MSFC as input to task 5-refine SCS conceptual designs. The designs selected for refinement will be developed to a lower level of detail, and further analyses will be done to begin to determine the size and speed of the components required to implement these designs.

Development of the GPM Observatory Thermal Vacuum Test Model

NASA Technical Reports Server (NTRS)

Yang, Kan; Peabody, Hume

2012-01-01

A software-based thermal modeling process was documented for generating the thermal panel settings necessary to simulate worst-case on-orbit flight environments in an observatory-level thermal vacuum test setup. The method for creating such a thermal model involved four major steps: (1) determining the major thermal zones for test as indicated by the major dissipating components on the spacecraft, then mapping the major heat flows between these components; (2) finding the flight equivalent sink temperatures for these test thermal zones; (3) determining the thermal test ground support equipment (GSE) design and initial thermal panel settings based on the equivalent sink temperatures; and (4) adjusting the panel settings in the test model to match heat flows and temperatures with the flight model. The observatory test thermal model developed from this process allows quick predictions of the performance of the thermal vacuum test design. In this work, the method described above was applied to the Global Precipitation Measurement (GPM) core observatory spacecraft, a joint project between NASA and the Japanese Aerospace Exploration Agency (JAXA) which is currently being integrated at NASA Goddard Space Flight Center for launch in Early 2014. From preliminary results, the thermal test model generated from this process shows that the heat flows and temperatures match fairly well with the flight thermal model, indicating that the test model can simulate fairly accurately the conditions on-orbit. However, further analysis is needed to determine the best test configuration possible to validate the GPM thermal design before the start of environmental testing later this year. Also, while this analysis method has been applied solely to GPM, it should be emphasized that the same process can be applied to any mission to develop an effective test setup and panel settings which accurately simulate on-orbit thermal environments.

Phasor Domain Steady-State Modeling and Design of the DC–DC Modular Multilevel Converter

DOE PAGES

Yang, Heng; Qin, Jiangchao; Debnath, Suman; ...

2016-01-06

The DC-DC Modular Multilevel Converter (MMC), which originated from the AC-DC MMC, is an attractive converter topology for interconnection of medium-/high-voltage DC grids. This paper presents design considerations for the DC-DC MMC to achieve high efficiency and reduced component sizes. A steady-state mathematical model of the DC-DC MMC in the phasor-domain is developed. Based on the developed model, a design approach is proposed to size the components and to select the operating frequency of the converter to satisfy a set of design constraints while achieving high efficiency. The design approach includes sizing of the arm inductor, Sub-Module (SM) capacitor, andmore » phase filtering inductor along with the selection of AC operating frequency of the converter. The accuracy of the developed model and the effectiveness of the design approach are validated based on the simulation studies in the PSCAD/EMTDC software environment. The analysis and developments of this paper can be used as a guideline for design of the DC-DC MMC.« less

The Design Consideration for Game-Based Learning

ERIC Educational Resources Information Center

Liang, Chaoyun; Lee, Yuan-Zone; Chou, Wen-Shou

2010-01-01

The integration of game playing with online education has recently become one of the most discussed issues in the e-learning field for its potentially positive impact on the development of related industries and on the social lives of young people. In this article, the authors propose a set of design considerations to assist game-based learning…

Alpine Forest. Mount Mitchell State Park: An Environmental Education Learning Experience Designed for Grades 4-6.

ERIC Educational Resources Information Center

Bradley, Jack L., Jr.; Beazley, Lea J.; Cook, Carrie

This curriculum packet was developed to provide environmental education through a series of hands-on activities for the classroom and the outdoor setting of Mount Mitchell State Park, North Carolina. Designed for grades 3 through 6, the packet meets established curriculum objectives of the North Carolina Department of Public Instruction's Standard…

The Impact on Education of the World Wide Web.

ERIC Educational Resources Information Center

Hobbs, D. J.; Taylor, R. J.

This paper describes a project which created a set of World Wide Web (WWW) pages documenting the state of the art in educational multimedia design; a prototype WWW-based multimedia teaching tool--a podiatry test using HTML forms, 24-bit color images and MPEG video--was also designed, developed, and evaluated. The project was conducted between…

Design Principles for Creating Locally-Rooted National Science and Mathematics Curricula in Timor-Leste

ERIC Educational Resources Information Center

Gabrielson, Curtis A.; Hsi, Sherry

2012-01-01

This paper articulates and illustrates design principles that guided the development of a set of hands-on teaching activities for the national science and mathematics curricula at junior-high and high-school level education in Timor-Leste, a small, low-income nation in Southeast Asia. A partnership between a university, an international science…

Design and Empirical Evaluation of Search Software for Legal Professionals on the WWW.

ERIC Educational Resources Information Center

Dempsey, Bert J.; Vreeland, Robert C.; Sumner, Robert G., Jr.; Yang, Kiduk

2000-01-01

Discussion of effective search aids for legal researchers on the World Wide Web focuses on the design and evaluation of two software systems developed to explore models for browsing and searching across a user-selected set of Web sites. Describes crawler-enhanced search engines, filters, distributed full-text searching, and natural language…

Foregrounding Knowledge in E-Learning Design: An Illustration in a Museum Setting

ERIC Educational Resources Information Center

Carvalho, Lucila; Dong, Andy; Maton, Karl

2015-01-01

The nature of knowledge, and the various forms knowledge may take, is a neglected aspect of the development of e-learning environments. This paper uses Legitimation Code Theory (LCT) to conceptualise the organising principles of knowledge practices. As we will illustrate, when it comes to the design of e-learning, the organising principles of the…

Information System Design Methodology Based on PERT/CPM Networking and Optimization Techniques.

ERIC Educational Resources Information Center

Bose, Anindya

The dissertation attempts to demonstrate that the program evaluation and review technique (PERT)/Critical Path Method (CPM) or some modified version thereof can be developed into an information system design methodology. The methodology utilizes PERT/CPM which isolates the basic functional units of a system and sets them in a dynamic time/cost…

A Mastery Rubric: Guiding Curriculum Design, Admissions and Development of Course Objectives

ERIC Educational Resources Information Center

Tractenberg, Rochelle E.; Umans, Jason G.; McCarter, Robert J.

2010-01-01

This article describes a "Mastery Rubric" (MR) used to design both the curriculum and the assessments in a new two-year certificate programme intended to train physicians in clinical research skills. The MR for clinical research skills is built around a set of core research skills: critical review of literature; articulation of research objective;…

Clinical Problem Solving Exercises for Pre-Clinical Medical Education: A Design, Implementation and Preliminary Evaluation.

ERIC Educational Resources Information Center

Bordage, Georges

Clinical problem solving exercises for preclinical medical education that were developed at Michigan State University School of Osteopathic Medicine are described. Two types of outcomes were set as priorities in the design and implementation of the problem solving sessions: small group peer interactions as instructional and evaluative resources;…

Rooted in Time. Weymouth Woods-Sandhills Nature Preserve: An Environmental Education Designed for Grades 5-6.

ERIC Educational Resources Information Center

North Carolina State Dept. of Environment, Health, and Natural Resources, Raleigh. Div. of Parks and Recreation.

This curriculum guide was developed to provide environmental education through a series of hands-on activities for the classroom and the outdoor setting of Weymouth Woods-Sandhills Nature Preserve, North Carolina. This activity packet, designed for grades 5 and 6, meets established curriculum objectives of the North Carolina Department of Public…

TriviaPrep: The Design and Development of a Competitive Academic Trivia Application

ERIC Educational Resources Information Center

Bailey, Sean D.

2017-01-01

An ever-growing trend in education is the integration of mobile devices in the school setting, especially considering the abundance of research available on BYOD (Bring Your Own Device). Not surprisingly, a common concern found is the lack of student interest in educational applications. This capstone reports a summary of the research, design, and…

Initial Validation of the Prekindergarten Classroom Observation Tool and Goal Setting System for Data-Based Coaching

ERIC Educational Resources Information Center

Crawford, April D.; Zucker, Tricia A.; Williams, Jeffrey M.; Bhavsar, Vibhuti; Landry, Susan H.

2013-01-01

Although coaching is a popular approach for enhancing the quality of Tier 1 instruction, limited research has addressed observational measures specifically designed to focus coaching on evidence-based practices. This study explains the development of the prekindergarten (pre-k) Classroom Observation Tool (COT) designed for use in a data-based…

Comprehensive Evaluation Criteria for English Learning Websites Using Expert Validity Surveys

ERIC Educational Resources Information Center

Yang, Ya-Ting C.; Chan, Chia-Ying

2008-01-01

This study aimed to develop a set of evaluation criteria for English learning websites. These criteria can assist English teachers/web designers in designing effective websites for their English courses and can also guide English learners in screening for appropriate and reliable websites to use in increasing their English ability. To fulfill our…

Designing a Telescope Mirror for Second-Semester Calculus Students

ERIC Educational Resources Information Center

Marchand, Richard J.; Rogers, Robert R.; Parker, Andrew T.

2006-01-01

The purpose of this article is to present an interdisciplinary project, developed as a collaborative effort by the authors, involving the design of a telescope mirror as it was given to second semester calculus students. The goals of the project are to provide an applied setting for the topics typically covered in this type of course including the…

The ZAP Project: Designing Interactive Computer Tools for Learning Psychology

ERIC Educational Resources Information Center

Hulshof, Casper; Eysink, Tessa; de Jong, Ton

2006-01-01

In the ZAP project, a set of interactive computer programs called "ZAPs" was developed. The programs were designed in such a way that first-year students experience psychological phenomena in a vivid and self-explanatory way. Students can either take the role of participant in a psychological experiment, they can experience phenomena themselves,…

Design Education without Borders: How Students Can Engage with a Socially Conscious Pedagogy as Global Citizens

ERIC Educational Resources Information Center

Macdonald, Iain; MacLeod, Myrna

2018-01-01

This study examines the student experience of a third sector graphic design project in an international context. Inspired by a humanist and socially conscious perspective that was originally set out by Ken Garland's 'First Things First' manifesto in 1964, the project developed into a collaborative learning experience for African and European…

Representing Authentic Learning Designs Supporting the Development of Online Communities of Learners

ERIC Educational Resources Information Center

Oliver, Ron; Herrington, Anthony; Herrington, Jan; Reeves, Thomas C.

2007-01-01

Authentic learning designs have been explored for some time now and have frequently been shown to provide learning settings that provide many meaningful contexts for learning. These meaningful contexts provide not only encouragement for students to learn but also a raft of learning enhancements including higher-order learning and forms of learning…

Learning Chinese Characters via Mobile Technology in a Primary School Classroom

ERIC Educational Resources Information Center

Lu, Jie; Meng, Sue; Tam, Vincent

2014-01-01

This paper describes a project, including the design, development, and use of a mobile application (referred to as application hereafter) for learning Chinese as a second language in a bilingual primary school. The application was designed for iPod Touch Apple technology with the purpose to facilitate learning of a fundamental set of 200 Chinese…

MapFactory - Towards a mapping design pattern for big geospatial data

NASA Astrophysics Data System (ADS)

Rautenbach, Victoria; Coetzee, Serena

2018-05-01

With big geospatial data emerging, cartographers and geographic information scientists have to find new ways of dealing with the volume, variety, velocity, and veracity (4Vs) of the data. This requires the development of tools that allow processing, filtering, analysing, and visualising of big data through multidisciplinary collaboration. In this paper, we present the MapFactory design pattern that will be used for the creation of different maps according to the (input) design specification for big geospatial data. The design specification is based on elements from ISO19115-1:2014 Geographic information - Metadata - Part 1: Fundamentals that would guide the design and development of the map or set of maps to be produced. The results of the exploratory research suggest that the MapFactory design pattern will help with software reuse and communication. The MapFactory design pattern will aid software developers to build the tools that are required to automate map making with big geospatial data. The resulting maps would assist cartographers and others to make sense of big geospatial data.

Control Requirements to Support Manual Piloting Capability

NASA Technical Reports Server (NTRS)

Merancy, Nujoud; Chevray, Kay; Gonzalez, Rodolfo; Madsen, Jennifer; Spehar, Pete

2013-01-01

The manual piloting requirements specified under the NASA Constellation Program involved Cooper-Harper ratings, which are a qualitative and subjective evaluation from experienced pilots. This type of verification entails a significant investment of resources to assess a completed design and is not one that can easily or meaningfully be applied upfront in the design phase. The evolution of the Multi-Purpose Crew Vehicle Program to include an independently developed propulsion system from an international partner makes application of Cooper-Harper based design requirements inadequate. To mitigate this issue, a novel solution was developed to reformulate the necessary piloting capability into quantifiable requirements. A trio of requirements was designed which specify control authority, precision, and impulse residuals enabling propulsion design within specified guidance and control boundaries. These requirements have been evaluated against both the existing Orion design and the proposed ESA design and have been found to achieve the desired specificity. The requirement set is capable of being applied to the development of other spacecraft in support of manual piloting.

Evaluation of Follow-Up Effects of the International Child Development Programme on Caregivers in Mozambique

ERIC Educational Resources Information Center

Skar, Ane-Marthe Solheim; Sherr, Lorraine; Clucas, Claudine; von Tetzchner, Stephen

2014-01-01

Parenting programs have been used to good effect in many settings, yet few are systematically introduced and evaluated in developing countries. This study explores the relative long-term effect of participation in the International Child Development Programme (ICDP) in a group of caregivers in Mozambique. A quasi-experimental design was used to…

Corporate sustainability: the environmental design and human resource management interface in healthcare settings.

PubMed

Sadatsafavi, Hessam; Walewski, John

2013-01-01

Purpose of the Paper: The purpose of this study is to provide healthcare organizations with a new perspective for developing strategies to enrich their human resource capabilities and improve their performance outcomes. The focus of this study is on leveraging the synergy between organizational management strategies and environmental design interventions. This paper proposes a framework for linking the built environment with the human resource management system of healthcare organizations. The framework focuses on the impact of the built environment regarding job attitudes and behaviors of healthcare workers. Research from the disciplines of strategic human resource management, resource-based view of firms, evidence-based design, and green building are utilized to develop the framework. The positive influence of human resource practices on job attitudes and behaviors of employees is one mechanism to improve organizational performance outcomes. Organizational psychologists suggest that human resource practices are effective because they convey that the organization values employee contributions and cares about their well-being. Attention to employee socio-emotional needs can be reciprocated with higher levels of motivation and commitment toward the organization. In line with these findings, healthcare environmental studies imply that physical settings and features can have a positive influence on job attitudes and the behavior of caregivers by providing for their physical and socio-emotional needs. Adding the physical environment as a complementary resource to the array of human resource practices creates synergy in improving caregivers' job attitudes and behaviors and enhances the human capital of healthcare firms. Staff, evidence-based design, interdisciplinary, modeling, perceived organizational supportPreferred Citation: Sadatsafavi, H., & Walewski, J. (2013). Corporate sustainability: The environmental design and human resource management interface in healthcare settings. Health Environments Research & Design Journal 6(2), pp 98-118.

Development of microheaters for gas sensor with an AT-Mega 8535 temperature controller using a PWM (pulse width modulation) method

NASA Astrophysics Data System (ADS)

Megayanti, Meti; Panatarani, Camellia; Joni, I. Made

2016-03-01

Microheater is the main component in gas sensor characterized by their sensitivity, selectivity, and time response of gas sensor which is depend on the microheater temperature stability. A Cu microheater was developed and utilized AT-Mega 8535 controller using a PWM (pulse width modulation) method. This control system is interfaced to the PC to observe the real time temperature response of the microheater. Three initial resistance (R0) variations of microheater were developed in an open loop control system. The power characteristic of designed microheater depends on the specified microheater initial resistance. The smaller R0, the less power required to reach a temperature setting value. The developed microheater was designed to reach a temperature setting value of 250°C having resistance 0.531 Ω for 1.979 Watt and 0.265 Ω for 1.072 Watt respectively. The results of the investigation on the control performances shows microheater-control system achieved operating temperature up to 250°C. The response of the temperature control shows smallest R0 resulted in a high stability with short settling time, short delay time and small ripple for temperature setting values higher than 150°C. The obtained error of microheater temperature with R0 = 0.265 is 8.596 %. It is concluded that the developed microheater can be utilized as a component of a gas sensor.

A score to estimate the likelihood of detecting advanced colorectal neoplasia at colonoscopy

PubMed Central

Kaminski, Michal F; Polkowski, Marcin; Kraszewska, Ewa; Rupinski, Maciej; Butruk, Eugeniusz; Regula, Jaroslaw

2014-01-01

Objective This study aimed to develop and validate a model to estimate the likelihood of detecting advanced colorectal neoplasia in Caucasian patients. Design We performed a cross-sectional analysis of database records for 40-year-old to 66-year-old patients who entered a national primary colonoscopy-based screening programme for colorectal cancer in 73 centres in Poland in the year 2007. We used multivariate logistic regression to investigate the associations between clinical variables and the presence of advanced neoplasia in a randomly selected test set, and confirmed the associations in a validation set. We used model coefficients to develop a risk score for detection of advanced colorectal neoplasia. Results Advanced colorectal neoplasia was detected in 2544 of the 35 918 included participants (7.1%). In the test set, a logistic-regression model showed that independent risk factors for advanced colorectal neoplasia were: age, sex, family history of colorectal cancer, cigarette smoking (p<0.001 for these four factors), and Body Mass Index (p=0.033). In the validation set, the model was well calibrated (ratio of expected to observed risk of advanced neoplasia: 1.00 (95% CI 0.95 to 1.06)) and had moderate discriminatory power (c-statistic 0.62). We developed a score that estimated the likelihood of detecting advanced neoplasia in the validation set, from 1.32% for patients scoring 0, to 19.12% for patients scoring 7–8. Conclusions Developed and internally validated score consisting of simple clinical factors successfully estimates the likelihood of detecting advanced colorectal neoplasia in asymptomatic Caucasian patients. Once externally validated, it may be useful for counselling or designing primary prevention studies. PMID:24385598

Redesigning printed educational materials for primary care physicians: design improvements increase usability.

PubMed

Grudniewicz, Agnes; Bhattacharyya, Onil; McKibbon, K Ann; Straus, Sharon E

2015-11-04

Printed educational materials (PEMs) are a frequently used tool to disseminate clinical information and attempt to change behavior within primary care. However, their effect on clinician behavior is limited. In this study, we explored how PEMs can be redesigned to better meet the needs of primary care physicians (PCPs) and whether usability and selection can be increased when design principles and user preferences are used. We redesigned a publicly available PEM using physician preferences, design principles, and graphic designer support. We invited PCPs to select their preferred document between the redesigned and original versions in a discrete choice experiment, followed by an assessment of usability with the System Usability Scale and a think aloud process. We conducted this study in both a controlled and opportunistic setting to determine whether usability testing results vary by study location. Think aloud data was thematically analyzed, and results were interpreted using the Technology Acceptance Model. One hundred and eighty four PCPs participated in the discrete choice experiment at the 2014 Family Medicine Forum, a large Canadian conference for family physicians. Of these, 87.7 % preferred the redesigned version. Follow-up interviews were held with a randomly selected group of seven participants. We repeated this in a controlled setting in Toronto, Canada, with a set of 14 participants. Using the System Usability Scale, we found that usability scores were significantly increased with the redesign (p < 0.001). We also found that when PCPs were given the choice between the two versions, they selected the redesigned version as their preferred PEM more often than the original (p < 0.001). Results did not appear to differ between the opportunistic and controlled setting. We used the results of the think aloud process to add to a list of end user preferences developed in a previous study. We found that redesigning a PEM with user preferences and design principles can improve its usability and result in the PEM being selected more often than the original. We feel this finding supports the involvement of the user, application of design principles, and the assistance of a graphic designer in the development of PEMs.

Design, development and first validation of a transcoding system from ICD-9-CM to ICD-10 in the IT.DRG Italian project.

PubMed

Della Mea, Vincenzo; Vuattolo, Omar; Frattura, Lucilla; Munari, Flavia; Verdini, Eleonora; Zanier, Loris; Arcangeli, Laura; Carle, Flavia

2015-01-01

In Italy, ICD-9-CM is currently used for coding health conditions at hospital discharge, but ICD-10 is being introduced thanks to the IT-DRG Project. In this project, one needed component is a set of transcoding rules and associated tools for easing coders work in the transition. The present paper illustrates design and development of those transcoding rules, and their preliminary testing on a subset of Italian hospital discharge data.

Developing e-Business Capabilities to Bridge the Knowledge Divide in Mediterranean Countries

NASA Astrophysics Data System (ADS)

Secundo, Giustina; Elia, Gianluca; Margherita, Alessandro; Passiante, Giuseppina

This paper presents the results achieved in terms of e-business capabilities developed in an International Master framed within an Euro-Medi-terranean cooperation. In particular, an e-Business Design Laboratory is here described which has been set up for designing and implementing innovative solutions to bring digital and organizational innovation in traditional and new industries. The most significant highlights of the last two editions of the Master are also reported in terms of the human, social and structural capital being generated.

Multipurpose Crew Restraints for Long Duration Space Flights

NASA Technical Reports Server (NTRS)

Whitmore, Mihriban; Baggerman, Susan; Ortiz, M. R.; Hua, L.; Sinnott, P.; Webb, L.

2004-01-01

With permanent human presence onboard the International Space Station (ISS), a crew will be living and working in microgravity, interfacing with their physical environment. Without optimum restraints and mobility aids (R&MA' s), the crewmembers may be handicapped for perfonning some of the on-orbit tasks. In addition to weightlessness, the confined nature of a spacecraft environment results in ergonomic challenges such as limited visibility and access to the activity area and may cause prolonged periods of unnatural postures. Thus, determining the right set of human factors requirements and providing an ergonomically designed environment are crucial to astronauts' well-being and productivity. The purpose of this project is to develop requirements and guidelines, and conceptual designs, for an ergonomically designed multi-purpose crew restraint. In order to achieve this goal, the project would involve development of functional and human factors requirements, design concept prototype development, analytical and computer modeling evaluations of concepts, two sets of micro gravity evaluations and preparation of an implementation plan. It is anticipated that developing functional and design requirements for a multi-purpose restraint would facilitate development of ergonomically designed restraints to accommodate the off-nominal but repetitive tasks, and minimize the performance degradation due to lack of optimum setup for onboard task performance. In addition, development of an ergonomically designed restraint concept prototype would allow verification and validation of the requirements defined. To date, we have identified "unique" tasks and areas of need, determine characteristics of "ideal" restraints, and solicit ideas for restraint and mobility aid concepts. Focus group meetings with representatives from training, safety, crew, human factors, engineering, payload developers, and analog environment representatives were key to assist in the development of a restraint concept based on previous flight experiences, the needs of future tasks, and crewmembers' preferences. Also, a catalog with existing IVA/EVA restraint and mobility aids has been developed. Other efforts included the ISS crew debrief data on restraints, compilation of data from MIR, Skylab and ISS on restraints, and investigating possibility of an in-flight evaluation of current restraint systems. Preliminary restraint concepts were developed and presented to long duration crewmembers and focus groups for feedback. Currently, a selection criterion is being refined for prioritizing the candidate concepts. Next steps include analytical and computer modeling evaluations of the selected candidate concepts, prototype development, and microgravity evaluations.

Design of Mobile Health Tools to Promote Goal Achievement in Self-Management Tasks

PubMed Central

Henderson, Geoffrey; Parmanto, Bambang

2017-01-01

Background Goal-setting within rehabilitation is a common practice ultimately geared toward helping patients make functional progress. Objective The purposes of this study were to (1) qualitatively analyze data from a wellness program for patients with spina bifida (SB) and spinal cord injury (SCI) in order to generate software requirements for a goal-setting module to support their complex goal-setting routines, (2) design a prototype of a goal-setting module within an existing mobile health (mHealth) system, and (3) identify what educational content might be necessary to integrate into the system. Methods A total of 750 goals were analyzed from patients with SB and SCI enrolled in a wellness program. These goals were qualitatively analyzed in order to operationalize a set of software requirements for an mHealth goal-setting module and identify important educational content. Results Those of male sex (P=.02) and with SCI diagnosis (P<.001) were more likely to achieve goals than females or those with SB. Temporality (P<.001) and type (P<.001) of goal were associated with likelihood that the goal would be achieved. Nearly all (210/213; 98.6%) of the fact-finding goals were achieved. There was no significant difference in achievement based on goal theme. Checklists, data tracking, and fact-finding tools were identified as three functionalities that could support goal-setting and achievement in an mHealth system. Based on the qualitative analysis, a list of software requirements for a goal-setting module was generated, and a prototype was developed. Targets for educational content were also generated. Conclusions Innovative mHealth tools can be developed to support commonly set goals by individuals with disabilities. PMID:28739558

Satellite Systems Design/Simulation Environment: A Systems Approach to Pre-Phase A Design

NASA Technical Reports Server (NTRS)

Ferebee, Melvin J., Jr.; Troutman, Patrick A.; Monell, Donald W.

1997-01-01

A toolset for the rapid development of small satellite systems has been created. The objective of this tool is to support the definition of spacecraft mission concepts to satisfy a given set of mission and instrument requirements. The objective of this report is to provide an introduction to understanding and using the SMALLSAT Model. SMALLSAT is a computer-aided Phase A design and technology evaluation tool for small satellites. SMALLSAT enables satellite designers, mission planners, and technology program managers to observe the likely consequences of their decisions in terms of satellite configuration, non-recurring and recurring cost, and mission life cycle costs and availability statistics. It was developed by Princeton Synergetic, Inc. and User Systems, Inc. as a revision of the previous TECHSAT Phase A design tool, which modeled medium-sized Earth observation satellites. Both TECHSAT and SMALLSAT were developed for NASA.

An XML-based method for astronomy software designing

NASA Astrophysics Data System (ADS)

Liao, Mingxue; Aili, Yusupu; Zhang, Jin

XML-based method for standardization of software designing is introduced and analyzed and successfully applied to renovating the hardware and software of the digital clock at Urumqi Astronomical Station. Basic strategy for eliciting time information from the new digital clock of FT206 in the antenna control program is introduced. By FT206, the need to compute how many centuries passed since a certain day with sophisticated formulas is eliminated and it is no longer necessary to set right UT time for the computer holding control over antenna because the information about year, month, day are all deduced from Julian day dwelling in FT206, rather than from computer time. With XML-based method and standard for software designing, various existing designing methods are unified, communications and collaborations between developers are facilitated, and thus Internet-based mode of developing software becomes possible. The trend of development of XML-based designing method is predicted.

An introduction to the new Productivity Information Management System (PIMS)

NASA Technical Reports Server (NTRS)

Hull, R.

1982-01-01

The productivity information management system (PIMS), is described. The main objective of this computerized system is to enable management scientists to interactively explore data concerning DSN operations, maintenance and repairs, to develop and verify models for management planning. The PIMS will provide a powerful set of tools for iteratively manipulating data sets in a wide variety of ways. The initial version of PIMS will be a small scale pilot system. The following topics are discussed: (1) the motivation for developing PIMS; (2) various data sets which will be integrated by PIMS; (3) overall design of PIMS; and (4) how PIMS will be used. A survey of relevant databases concerning DSN operations at Goldstone is also included.

Military Curricula for Vocational & Technical Education. Programmer/Analyst 4-4.

ERIC Educational Resources Information Center

Department of the Army, Washington, DC.

This program of instruction and various instructional materials for a secondary-postsecondary level course for programmer/analysts is one of a number of military-developed curriculum packages selected for adaptation to vocational instruction and curriculum development in a civilian setting. The eight-week, three-section course is designed to…

Matematica 2. Livro do Aluno (Mathematics 2. Student Workbook).

ERIC Educational Resources Information Center

D'Alu, Maria Jose Miranda de Sousa

This mathematics textbook, written in Portuguese, is designed for second graders. Developed from objectives set forth by the National Portuguese Materials Development Center, it follows closely the objectives and methodology of major curricula used in schools of the United States. The thirteen chapters deal with: numeration (0-999); addition with…

Factors Influencing College Student Health: Development of the Psychological Distress Inventory.

ERIC Educational Resources Information Center

Lustman, Patrick J.; And Others

1984-01-01

Describes the three-phase development of the Psychological Distress Inventory (PDI), an instrument designed primarily to measure life stress in college students. Standard psychometric information is presented, including reliability, validity, and some effects of response set. The PDI allows users to separately assess degree of depression, anxiety,…

Operation Rescue. Final Report.

ERIC Educational Resources Information Center

McKee, Neena; Crawford, Georgette

The Operation Rescue project was designed to develop a classroom setting for the delivery of comprehensive educational services to "at risk" young adolescents. The classroom was established as part of the pre-existing Jonesboro Alternative School, and it utilized the basic academic and social program developed by this entity over 12…

Middle School Educators' Perceptions of Online Professional Development

ERIC Educational Resources Information Center

Theodocion, Kelley E.

2012-01-01

Numerous researchers have investigated distance education in postsecondary settings, but there is a paucity of research regarding the design and delivery of online professional development for K-12 educators. The goal of this mixed methods sequential exploratory study was to examine attitudes of middle grades educators toward an online…

13 CFR 124.402 - How does a Participant develop a business plan?

Code of Federal Regulations, 2014 CFR

2014-01-01

... Participant must develop a comprehensive business plan setting forth its business targets, objectives, and... future plans to enter into one or more new markets; (2) The applicant's designation of its primary... the concern from receiving and performing non-8(a) contracts; (5) Specific targets, objectives, and...

13 CFR 124.402 - How does a Participant develop a business plan?

Code of Federal Regulations, 2013 CFR

2013-01-01

... Participant must develop a comprehensive business plan setting forth its business targets, objectives, and... future plans to enter into one or more new markets; (2) The applicant's designation of its primary... the concern from receiving and performing non-8(a) contracts; (5) Specific targets, objectives, and...

13 CFR 124.402 - How does a Participant develop a business plan?

Code of Federal Regulations, 2011 CFR

2011-01-01

... Participant must develop a comprehensive business plan setting forth its business targets, objectives, and... future plans to enter into one or more new markets; (2) The applicant's designation of its primary... the concern from receiving and performing non-8(a) contracts; (5) Specific targets, objectives, and...

13 CFR 124.402 - How does a Participant develop a business plan?

Code of Federal Regulations, 2012 CFR

2012-01-01

... Participant must develop a comprehensive business plan setting forth its business targets, objectives, and... future plans to enter into one or more new markets; (2) The applicant's designation of its primary... the concern from receiving and performing non-8(a) contracts; (5) Specific targets, objectives, and...

Horticultural Training for Adolescent Special Education Students.

ERIC Educational Resources Information Center

Airhart, Douglas L.; And Others

1987-01-01

A horticultural training program was developed in conjunction with a prevocational program designed for students with limited ability to perform in a normal high school setting due to moderate intellectual impairment or socialization problems. Prior appraisal by the job developer of a client's adaptability to the program was required to provide…

Instructor's Guide for Human Development Student Modules.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Vocational Education.

This instructor's guide is designed for use with an accompanying set of 61 student learning modules on human development. Included among the topics covered in the individual modules are the following: consumer and homemaking education (health and nutrition, personal appearance and grooming, puberty, menstruation, the human reproductive system,…