Shingles (Herpes Zoster)

MedlinePlus

... Form Controls Cancel Submit Search The CDC Shingles (Herpes Zoster) Note: Javascript is disabled or is not ... United States will develop shingles, also known as herpes zoster, in their lifetime. There are an estimated ...

Next-Generation Factory-Produced Cool Asphalt Shingles: Phase 1 Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levinson, Ronnen M.; Chen, Sharon S.; Ban-Weiss, George A.

As the least expensive category of high-slope roofing in the U.S., shingles are found on the roofs of about 80% of U.S. homes, and constitute about 80% (by product area) of this market. Shingles are also among the least reflective high-slope roofing products, with few cool options on the market. The widespread use of cool roofs in the two warmest U.S. climate zones could reduce annual residential cooling energy use in these zones by over 7%. This project targets the development of high-performance cool shingles with initial solar reflectance at least 0.40 and a cost premium not exceeding US$0.50/ft². Phasemore » 1 of the current study explored three approaches to increasing shingle reflectance. Method A replaces dark bare granules by white bare granules to enhance the near-infrared reflectance attained with cool pigments. Method B applies a white basecoat and a cool-color topcoat to a shingle surfaced with dark bare granules. Method C applies a visually clear, NIR-reflecting surface treatment to a conventionally colored shingle. Method A was the most successful, but our investigation of Method B identified roller coating as a promising top-coating technique, and our study of Method C developed a novel approach based on a nanowire mesh. Method A yielded red, green, brown, and black faux shingles with solar reflectance up to 0.39 with volumetric coloration. Since the base material is white, these reflectances can readily be increased by using less pigment. The expected cost premium for Method A shingles is less than our target limit of $0.50/ft², and would represent less than a 10% increase in the installed cost of a shingle roof. Using inexpensive but cool (spectrally selective) iron oxide pigments to volumetrically color white limestone synthesized from sequestered carbon and seawater appears to offer high albedo at low cost. In Phase 2, we plan to refine the cool shingle prototypes, manufacture cool granules, and manufacture and market high-performance cool shingles.« less

Shingles: Hope through Research

MedlinePlus

... Caregiver Education » Hope Through Research Shingles: Hope Through Research Download publication What is shingles? What are the ... lessen the severity of their chickenpox. top What research is being done? The mission of the National ...

Sting of Shingles: Vaccine, Treatments Reduce Risks

MedlinePlus

... shingles. Links Shingles (AgePage) Shots for Safety (AgePage) Red, Itchy Rash? NIH Office of Communications and Public Liaison Building 31, Room 5B52 Bethesda, MD 20892-2094 nihnewsinhealth@od.nih. ...

Chickenpox and Shingles Tests

MedlinePlus

... Time and International Normalized Ratio (PT/INR) PSEN1 Quantitative Immunoglobulins Red Blood Cell (RBC) Antibody Identification Red ... of Neurological Disorders and Stroke: Shingles, Hope Through Research CDC: Shingles MedlinePlus Medical Encyclopedia: Chickenpox March of ...

Shingles.

PubMed

Litchfield, Sheila M

2010-06-01

Shingles, an acute infection of the nervous system, and postherpetic neuralgia (PHN), a painful complication of zoster that can prolong recovery, are likely to be seen more frequently in the U.S. workplace as the population ages and as workers return to the workplace in immunocompromised states (e.g., with AIDS, after treatment for cancer, and after organ transplantation). Shingles and PHN could adversely affect productivity and lead to absenteeism. Zostavax is a new vaccine effective for preventing shingles and PHN. Occupational health nurses can recognize potential cases of shingles and refer for treatment early. Occupational health nurses are also in a position to establish vaccination campaigns or to recommend vaccinations to employees. It is anticipated that early intervention and prevention of shingles could reduce absenteeism, improve productivity in the workplace, and significantly improve quality of life for the aging work force. Copyright 2010, SLACK Incorporated.

Recombinant zoster (shingles) vaccine, RZV - what you need to know

MedlinePlus

... gov/ency/article/007736.htm Recombinant zoster (shingles) vaccine, RZV - what you need to know To use ... in its entirety from the CDC Recombinant Shingles Vaccine Information Statement (VIS): www.cdc.gov/vaccines/hcp/ ...

Protecting Yourself From Shingles | NIH MedlinePlus the Magazine

MedlinePlus

... with shingles can spread the disease through direct contact with the rash when the rash is in the blister phase. ... person who has never had chickenpox through direct contact with the rash. The person exposed would develop chickenpox, not shingles. ...

Incorporation of recycled asphalt shingles in hot-mixed asphalt pavement mixtures.

DOT National Transportation Integrated Search

2010-03-01

Rises in construction and asphalt binder costs, as well as the growing pressures on landfills, have contributed to the : increased use of tear-off scrap shingles (TOSS) and manufacturer waste scrap shingles (MWSS) into hot-mixed : asphalt (HMA) pavem...

Shingle system

DOEpatents

Dinwoodie, Thomas L [Piedmont, CA

2008-02-12

A barrier, such as a PV module, is secured to a base by a support to create a shingle assembly with a venting region defined between the barrier and base for temperature regulation. Water resistant junctions may be formed between the bases of adjacent shingle assemblies of an array of shingle assemblies. The base may include an insulation layer underlying a water barrier. The base may also include a waterproofing element; the width and height of the barrier may be shorter than the width and height of the waterproofing element.

Asphalt Roofing Shingles Into Energy Project Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jameson, Rex, PE

2008-04-28

Based on a widely cited September, 1999 report by the Vermont Agency of Natural Resources, nearly 11 million tons of asphalt roofing shingle wastes are produced in the United States each year. Recent data suggests that the total is made up of about 9.4 million tons from roofing tear-offs and about 1.6 million tons from manufacturing scrap. Developing beneficial uses for these materials would conserve natural resources, promote protection of the environment and strengthen the economy. This project explored the feasibility of using chipped asphalt shingle materials in cement manufacturing kilns and circulating fluidized bed (CFB) boilers. A method ofmore » enhancing the value of chipped shingle materials for use as fuel by removing certain fractions for use as substitute raw materials for the manufacture of new shingles was also explored. Procedures were developed to prevent asbestos containing materials from being processed at the chipping facilities, and the frequency of the occurrence of asbestos in residential roofing tear-off materials was evaluated. The economic feasibility of each potential use was evaluated based on experience gained during the project and on a review of the well established use of shingle materials in hot mix asphalt. This project demonstrated that chipped asphalt shingle materials can be suitable for use as fuel in circulating fluidized boilers and cement kilns. More experience would be necessary to determine the full benefits that could be derived and to discover long term effects, but no technical barriers to full scale commercial use of chipped asphalt shingle materials in these applications were discovered. While the technical feasibility of various options was demonstrated, only the use of asphalt shingle materials in hot mix asphalt applications is currently viable economically.« less

Characterization and best use of recycled asphalt shingles in hot-mix asphalt.

DOT National Transportation Integrated Search

2012-10-01

Recycled asphalt shingles (RAS) often containing more than 20 percent asphalt binder has become another black gold in the asphalt industry. There are two basic types of RAS scraps in the market: tear-off asphalt shingles (TOAS) and manufacture waste ...

Mixing and compaction recommendations for warm mix asphalt (WMA) with recycled asphalt shingles (RAS) : final report.

DOT National Transportation Integrated Search

2017-05-01

The use of recycled asphalt shingles (RAS) is an attractive option for asphalt mixture producers due to the : high amount of recycled asphalt binder available in RAS. By weight, RAS contains 10 to 25% asphalt by total : weight of the shingle. The asp...

Installation, care, and maintenance of wood shake and shingle siding

Treesearch

Jack Dwyer; Tony Bonura; Arnie Nebelsick; Sam Williams; Christopher G. Hunt

2011-01-01

This article gives general guidelines for selection, installation, finishing, and maintenance of wood shakes and shingles. The authors gathered information from a variety of sources: research publications on wood finishing, technical data sheets from paint manufacturers, installation instructions for shake and shingle siding, and interviews with experts having...

Shingle System And Method

DOEpatents

Dinwoodie, Thomas L.

2005-04-26

A barrier, such as a PV module, is secured to a base by a support to create a shingle assembly with a venting region defined between the barrier and base for temperature regulation. The bottom edges of the barriers of one row may overlap the top edges of the barriers of another row. The shingle assemblies may be mounted by first mounting the bases to an inclined surface; the barriers may be then secured to the bases using the supports to create rows of shingle assemblies defining venting regions between the barriers and the bases for temperature regulation.

[Reactivation of herpes zoster infection by varicella-zoster virus].

PubMed

Cvjetković, D; Jovanović, J; Hrnjaković-Cvjetković, I; Brkić, S; Bogdanović, M

1999-01-01

There has been considerable interest in varicella-zoster virus in the middle of the twentieth century. Virus isolation in 1958 had made it possible to find out the complete DNA sequence of the varicella-zoster virus. Molecular identify of the causative agents of varicella and shingles had been proved. ETIOPATHOGENESIS AND HISTOPATHOLOGY: Varicella-zoster virus is a member of the Herpesviridae family. After primary infection which results in varicella, the virus becomes latent in the cerebral or posterior root ganglia. Some of these individuals develop shingles after several decades because of virus reactivation. It is caused by decline of cellular immune response. Circumstances such as old age, hard work, using of steroids or malignancies contribute to the appearance of shingles. Histopathological findings include degenerative changes of epithelial cells such as ballooning, multinucleated giant cells and eosinophilic intranuclear inclusions. Shingles occur sporadically, mainly among the elderly who have had varicella. There is no seasonal appearance of shingles. Individuals suffering from shingles may be sometimes contagious for susceptible children because of enormous amount of virus particles in vesicle fluid. Clinically, shingles is characterized at first by pain or discomfort in involved dermatome, usually without constitutional symptoms. Local edema and erythema appear before developing of rash. Maculopapular and vesicular rash evolves into crusts. The most commonly involved ganglia are: lumbar, thoracic, sacral posterior root ganglia, then geniculate ganglion of the VIIth cranial nerve and the trigeminal ganglion. The most common complication, postherpetic neuralgia, may last for as long as two or three weeks, sometimes even one year or more. Other complications that may be seen in shingles, but more rarely, are ocular (keratitis, iridocyclitis, secondary glaucoma, loss of sight), neurological (various motor neuropathies, encephalitis, Guillain-Barre syndrome), secondary bacterial infection of vesicles. Immunocompromised patients often develop more severe disease lasting up to two weeks, skin lesions are more numerous and often with hemorrhagic base and there is a high possibility for cutaneous dissemination and visceral involvement including viral pneumonia, encephalitis and hepatitis. Chronic shingles may also be found in immunocompromised hosts, particularly in those with a diagnosis of HIV infection. In patients with HIV infection, shingles is often characterised by radicular pain and itching several days before appearance of skin lesions. Those patients may have two or more dermatomes involved and recurrences of shingles cannot be quite infrequent in those patients. But visceral involvement is rarer than in other immunocompromised patients. Shingles may occur in the second half of pregnancy and usually have a mild course. However, congenital abnormalities has been described in few cases. The diagnosis of shingles is usually made by history and physical examination. Exceptionally, for example in zoster sine herpete and atypical forms of shingles, virus isolation and serological tests must be used. Some other diseases may cause similar skin lesions and rash (varicella, erysipelas, impetigo, enteroviral infections, herpes simplex infections). These diseases are excluded by using detailed history taking and physical examination, laboratory findings, virus isolation and commercially available serological tests. The vast majority of immunocompetent persons with shingles should be treated only by symptomatic therapy. Predominantly it is directed toward reduction of fever and avoiding secondary bacterial skin infection in immunocompetent hosts. Acute neuritis and post-herpetic neuralgia require administration of various analgesics, even like amitriptyline hydrochloride and fluphenazine hydrochloride. Acyclovir therapy is limited to ophthal

Installation, care, and maintenance of wood shake and shingle roofs

Treesearch

Tony Bonura; Jack Dwyer; Arnie Nebelsick; Brent Stuart; R. Sam Williams; Christopher Hunt

2011-01-01

This article gives general guidelines for selection, installation, finishing, and maintenance of wood shake and shingle roofs. The authors have gathered information from a variety of sources: research publications on wood finishing, technical data sheets from paint manufacturers, installation instructions for shake and shingle roofs, and interviews with experts having...

Fire resistant PV shingle assembly

DOEpatents

Lenox, Carl J.

2012-10-02

A fire resistant PV shingle assembly includes a PV assembly, including PV body, a fire shield and a connection member connecting the fire shield below the PV body, and a support and inter-engagement assembly. The support and inter-engagement assembly is mounted to the PV assembly and comprises a vertical support element, supporting the PV assembly above a support surface, an upper interlock element, positioned towards the upper PV edge, and a lower interlock element, positioned towards the lower PV edge. The upper interlock element of one PV shingle assembly is inter-engageable with the lower interlock element of an adjacent PV shingle assembly. In some embodiments the PV shingle assembly may comprise a ventilation path below the PV body. The PV body may be slidably mounted to the connection member to facilitate removal of the PV body.

Zoster vaccine live for the prevention of shingles in the elderly patient

PubMed Central

Zussman, Jamie; Young, Lorraine

2008-01-01

Shingles, also known as herpes zoster, is a common disease in the elderly population that is caused by reactivation of latent varicella zoster virus. Its manifestations and complications can lead to significant short- and long-term morbidity. In 2006, the United States Food and Drug Administration approved Zoster Vaccine Live (Zostavax®) for the prevention of herpes zoster in immunocompetent adults age 60 and over. The approval was based on the results of a large, multi-center clinical trial, the Shingles Prevention Study. This study showed that vaccination significantly decreased shingles incidence, burden of illness due to disease, and the development of, and severity of postherpetic neuralgia. This review offers an overview of varicella zoster virus infection and complications, a summary of the Shingles Prevention Study, and a critical analysis designed to aid the practicing physician who has questions about vaccine administration. PMID:18686747

Analysis of three-year Wisconsin temperature histories for roof systems using wood, wood-thermoplastic composite, and fiberglass shingles

Treesearch

Jerrold E. Winandy; Cherilyn A. Hatfield

2007-01-01

Temperature histories for various types of roof shingles, wood roof sheathing, rafters, and nonventilated attics were monitored in outdoor attic structures using simulated North American light-framed construction. In this paper, 3-year thermal load histories for wood-based composite roof sheathing, wood rafters, and attics under western redcedar (WRC) shingles, wood-...

Two-year Wisconsin thermal loads for roof assemblies and wood, wood–plastic composite, and fiberglass shingles

Treesearch

Jerrold E. Winandy; Michael Grambsch; Cherilyn Hatfield

2005-01-01

Temperature histories for various types of roof shingles, wood roof sheathing, roof rafters, and non-ventilated attics are being monitored in outdoor attic structures using simulated North American light-framed construction. This report presents 2-year data histories for annual thermal loads for western redcedar, wood–thermoplastic composite, and fiberglass shingles...

Evaluation of the effect of chickenpox vaccination on shingles epidemiology using agent-based modeling.

PubMed

Rafferty, Ellen; McDonald, Wade; Qian, Weicheng; Osgood, Nathaniel D; Doroshenko, Alexander

2018-01-01

Biological interactions between varicella (chickenpox) and herpes zoster (shingles), two diseases caused by the varicella zoster virus (VZV), continue to be debated including the potential effect on shingles cases following the introduction of universal childhood chickenpox vaccination programs. We investigated how chickenpox vaccination in Alberta impacts the incidence and age-distribution of shingles over 75 years post-vaccination, taking into consideration a variety of plausible theories of waning and boosting of immunity. We developed an agent-based model representing VZV disease, transmission, vaccination states and coverage, waning and boosting of immunity in a stylized geographic area, utilizing a distance-based network. We derived parameters from literature, including modeling, epidemiological, and immunology studies. We calibrated our model to the age-specific incidence of shingles and chickenpox prior to vaccination to derive optimal combinations of duration of boosting (DoB) and waning of immunity. We conducted paired simulations with and without implementing chickenpox vaccination. We computed the count and cumulative incidence rate of shingles cases at 10, 25, 50, and 75 years intervals, following introduction of vaccination, and compared the difference between runs with vaccination and without vaccination using the Mann-Whitney U-test to determine statistical significance. We carried out sensitivity analyses by increasing and lowering vaccination coverage and removing biological effect of boosting. Chickenpox vaccination led to a decrease in chickenpox cases. The cumulative incidence of chickenpox had dropped from 1,254 cases per 100,000 person-years pre chickenpox vaccination to 193 cases per 100,000 person-years 10 years after the vaccine implementation. We observed an increase in the all-ages shingles cumulative incidence at 10 and 25 years post chickenpox vaccination and mixed cumulative incidence change at 50 and 75 years post-vaccination. The magnitude of change was sensitive to DoB and ranged from an increase of 22-100 per 100,000 person-years at 10 years post-vaccination for two and seven years of boosting respectively ( p < 0.001). At 75 years post-vaccination, cumulative incidence ranged from a decline of 70 to an increase of 71 per 100,000 person-years for two and seven years of boosting respectively ( p < 0.001). Sensitivity analyses had a minimal impact on our inferences except for removing the effect of boosting. Our model demonstrates that over the longer time period, there will be a reduction in shingles incidence driven by the depletion of the source of shingles reactivation; however in the short to medium term some age cohorts may experience an increase in shingles incidence. Our model offers a platform to further explore the relationship between chickenpox and shingles, including analyzing the impact of different chickenpox vaccination schedules and cost-effectiveness studies.

Surface roughness effects on the solar reflectance of cool asphalt shingles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akbari, Hashem; Berdahl, Paul; Akbari, Hashem

2008-02-17

We analyze the solar reflectance of asphalt roofing shingles that are covered with pigmented mineral roofing granules. The reflecting surface is rough, with a total area approximately twice the nominal area. We introduce a simple analytical model that relates the 'micro-reflectance' of a small surface region to the 'macro-reflectance' of the shingle. This model uses a mean field approximation to account for multiple scattering effects. The model is then used to compute the reflectance of shingles with a mixture of different colored granules, when the reflectances of the corresponding mono-color shingles are known. Simple linear averaging works well, with smallmore » corrections to linear averaging derived for highly reflective materials. Reflective base granules and reflective surface coatings aid achievement of high solar reflectance. Other factors that influence the solar reflectance are the size distribution of the granules, coverage of the asphalt substrate, and orientation of the granules as affected by rollers during fabrication.« less

RAP/RAS workshop.

DOT National Transportation Integrated Search

2013-01-01

: RAP & RAS increases mix stiffness : : Most WMA additives decrease stiffness : : Tear-Off shingles are stiffer than Man-waste shingles : : Using multiple recycled bins improves consistency : : Finer RAS material improves consiste...

Genetics Home Reference: shingles

MedlinePlus

... Aftercare MedlinePlus Encyclopedia: Shingles National Health Service (UK): Post-Herpetic Neuralgia Treatment General Information from MedlinePlus (5 links) Diagnostic Tests Drug Therapy Genetic Counseling Palliative Care Surgery and ...

Health disparities in chickenpox or shingles in Alberta?

PubMed

Russell, M L; Schopflocher, D P; Svenson, L W

2008-01-01

Exploring for evidence of socio-economic health disparities in chickenpox and shingles in Alberta, Canada. Chickenpox and shingles cases were identified from administrative data from Alberta's universal health care insurance system for 1994-2002. Incident cases were those with the earliest dated utilization of a health service (chickenpox: ICD9-CM 052/ICD10-CA B01; shingles: ICD9-CM 053/ ICD10-CA B02). Crude and age-specific rates were estimated for each year by an indicator of socio-demographic status based upon the nature of the payer and eligibility for health care premium subsidy (SES-proxy) for the provincial health care insurance system. Among young children there is a gradient of disparity in chickenpox rates prior to the year in which publicly funded vaccination programs were implemented. After this point, disparities decline but less so for First Nations children than for others. There was no evidence of disparity by SES-proxy for shingles. Publicly funded vaccination programs may effectively contribute to reduction in disease disparities for vaccine-preventable diseases. Further study is required to ascertain why disparities continue for First Nations children.

Solar power roof shingle

NASA Technical Reports Server (NTRS)

Forestieri, A. F.; Ratajczak, A. F.; Sidorak, L. G.

1975-01-01

Silicon solar cell module provides both all-weather protection and electrical power. Module consists of array of circular silicon solar cells bonded to fiberglass substrate roof shingle with fluorinated ethylene propylene encapsulant.

Photos of Shingles

MedlinePlus

... content Start of Search Controls Search Form Controls Cancel Submit Search The CDC CDC A-Z Index ... Z # Start of Search Controls Search Form Controls Cancel Submit Search The CDC Shingles (Herpes Zoster) Note: ...

Herpes zoster (shingles) disseminated (image)

MedlinePlus

Herpes zoster (shingles) normally occurs in a limited area that follows a dermatome (see the "dermatome" picture). In individuals with damaged immune systems, herpes zoster may be widespread (disseminated), causing serious illness. ...

Shingles

MedlinePlus

Herpes zoster - shingles ... Herpes zoster usually clears in 2 to 3 weeks and rarely returns. If the virus affects the ... the chickenpox vaccine. Older adults who receive the herpes zoster vaccine are less likely to have complications ...

Neurological Consequences of Cytomegalovirus Infection

MedlinePlus

... viruses that causes cold sores (herpes simplex virus), infectious mononucleosis (Epstein-Barr virus), and chickenpox/shingles (varicella zoster ... viruses that causes cold sores (herpes simplex virus), infectious mononucleosis (Epstein-Barr virus), and chickenpox/shingles (varicella zoster ...

Fungal Disfigurement of Paper, and Soft Rot of Cedar Shingles 1

PubMed Central

Eveleigh, D. E.

1970-01-01

Disfiguration of paper by Cladosporium cladosporioides is described, and the association between “soft rot” fungi and the greying of cedar shingles in marine locations is reported. Images PMID:5463581

Facts about Chickenpox and Shingles for Adults

MedlinePlus

... heart failure, heart attack, type II diabetes and major depression. Prevention Chickenpox can be prevented by vaccination. Children ... heart failure, heart attack, type II diabetes and major depression. Antiviral medications can be used to treat shingles ...

Development of a shingle-type solar cell module

NASA Technical Reports Server (NTRS)

Shepard, N. F., Jr.; Sanchez, L. E.

1978-01-01

The development of a solar cell module, which is suitable for use in place of shingles on the sloping roofs of residental or commercial buildings, is reported. The design consists of nineteen series-connected 53 mm diameter solar cells arranged in a closely packed hexagon configuration. The shingle solar cell module consists of two basic functional parts: an exposed rigid portion which contains the solar cell assembly, and a semi-flexible portion which is overlapped by the higher courses of the roof installation. Consideration is given to the semi-flexible substrate configuration and solar cell and module-to-module interconnectors. The results of an electrical performance analysis are given and it is noted that high specific power output can be attributed to the efficient packing of the circular cells within the hexagon shape. The shingle should function for at least 15 years, with a specific power output of 98 W/sq w.

1. DEPENDENCY Both pointed and flat shingles appear to be ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. DEPENDENCY Both pointed and flat shingles appear to be original. Original purpose of this building was not recorded at the time of this survey. - Annandale Plantation, Dependency, State Routes 30 & 18 vicinity, Georgetown, Georgetown County, SC

Investigation of the use of tear-off shingles in asphalt concrete.

DOT National Transportation Integrated Search

2010-05-01

This investigation focused on the use of asphalt shingles that had been removed from roofs and recycled into asphalt concrete. Upon invitation by the Virginia Department of Transportation (VDOT), three asphalt contractors produced and placed sections...

Effects of recycled shingles and increased RAP percentages : [research brief].

DOT National Transportation Integrated Search

2012-01-01

As asphalt binder becomes more expensive, the use of recycled asphalt materials becomes : more attractive. Recycled asphalt pavement (RAP) and recycled asphalt shingles (RAS) offer a partial substitute for virgin aggregate and binder in asphalt pavem...

29. RECYCLED ATTIC JOISTS SHOWING SHINGLE LATH NOTCHING ON TOP ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

29. RECYCLED ATTIC JOISTS SHOWING SHINGLE LATH NOTCHING ON TOP SURFACE (Note shadow of plaster lath on bottom surface. See also PA-1440-28.) - James McCrea Houses, 108-110 Sansom Street, Philadelphia, Philadelphia County, PA

Impact of Recycled Asphalt Shingles (RAS) on Asphalt Binder Performance

DOT National Transportation Integrated Search

2018-01-01

This study evaluated the effect of reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) on virgin binder true grade and fracture energy density (FED). A mortar approach, which avoids the need for binder extraction, was adopted to quan...

Effect of recovered binders from recycled shingles and increased RAP percentages on resultant binder PG.

DOT National Transportation Integrated Search

2011-12-01

This research evaluated the properties of recycled asphalt binders from Wisconsin sources. Continuous grading : properties were measured for 18 recycled binder sources: 12 reclaimed asphalt pavement (RAP) sources and 6 recycled : asphalt shingle sour...

A critical appraisal of 'Shingrix', a novel herpes zoster subunit vaccine (HZ/Su or GSK1437173A) for varicella zoster virus.

PubMed

Bharucha, Tehmina; Ming, Damien; Breuer, Judith

2017-08-03

HZ/Su, branded as 'Shingrix', is one of the newest vaccines to be submitted for multi-national regulatory approval. It is targeted to prevent shingles, a global concern with aging populations. A live attenuated vaccine for shingles has been available for over a decade, however it is contraindicated in specific subgroups of people, and there are added concerns regarding long-term immunogenicity. HZ/Su is the first subunit vaccine developed to protect against shingles. This paper provides a critical appraisal of current evidence regarding HZ/Su.

Evaluation of stone-matrix asphalt mixtures containing recycled asphalt shingles(RAS).

DOT National Transportation Integrated Search

2017-05-01

In recent years, there has been increased interest in the use of reclaimed material in asphalt : mixtures. The use of recycled asphalt shingles (RAS) has been of interest because of the high asphalt : content, although this asphalt is considerably st...

Evaluation of the benefits of adding waste fiberglass asphalt roofing shingles to hot mix asphalt

DOT National Transportation Integrated Search

1997-07-03

The decreased availability of landfills, growing concern over waste disposal, and rising cost of asphalt cement, resulted in an increased interest in incorporating waste asphalt roofing shingles in the production of asphalt concrete mixes. This proje...

A novel technique for the production of cool colored concrete tile and asphalt shingle roofing products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levinson, Ronnen; Akbari, Hashem; Berdahl, Paul

The widespread use of solar-reflective roofing materials can save energy, mitigate urban heat islands and slow global warming by cooling the roughly 20% of the urban surface that is roofed. In this study we created prototype solar-reflective nonwhite concrete tile and asphalt shingle roofing materials using a two-layer spray coating process intended to maximize both solar reflectance and factory-line throughput. Each layer is a thin, quick-drying, pigmented latex paint based on either acrylic or a poly(vinylidene fluoride)/acrylic blend. The first layer is a titanium dioxide rutile white basecoat that increases the solar reflectance of a gray-cement concrete tile from 0.18more » to 0.79, and that of a shingle surfaced with bare granules from 0.06 to 0.62. The second layer is a 'cool' color topcoat with weak near-infrared (NIR) absorption and/or strong NIR backscattering. Each layer dries within seconds, potentially allowing a factory line to pass first under the white spray, then under the color spray. We combined a white basecoat with monocolor topcoats in various shades of red, brown, green and blue to prepare 24 cool color prototype tiles and 24 cool color prototypes shingles. The solar reflectances of the tiles ranged from 0.26 (dark brown; CIELAB lightness value L* = 29) to 0.57 (light green; L* = 76); those of the shingles ranged from 0.18 (dark brown; L* = 26) to 0.34 (light green; L* = 68). Over half of the tiles had a solar reflectance of at least 0.40, and over half of the shingles had a solar reflectance of at least 0.25.« less

5. EXTERIOR OF TRIPLEX COTTAGE ROOF SHOWING MANVILLE COMPOSITION SHINGLES, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. EXTERIOR OF TRIPLEX COTTAGE ROOF SHOWING MANVILLE COMPOSITION SHINGLES, POURED CONCRETE CHIMNEYS, AND TRANSLUCENT PLASTIC COVERING OVER WALKWAY AT REAR OF HOUSE (PHOTO LEFT). VIEW TO NORTHWEST. - Lee Vining Creek Hydroelectric System, Triplex Cottage, Lee Vining Creek, Lee Vining, Mono County, CA

Risk of skin and soft tissue infections (including shingles) in patients exposed to anti-tumour necrosis factor therapy: results from the British Society for Rheumatology Biologics Register

PubMed Central

Galloway, James B; Mercer, Louise K; Moseley, Alison; Dixon, William G; Ustianowski, Andrew P; Helbert, Matthew; Watson, Kath D; Lunt, Mark; Hyrich, Kimme L; Symmons, Deborah PM

2013-01-01

Introduction Anti-tumour necrosis factor (TNF) therapy is a mainstay of treatment in rheumatoid arthritis (RA). In 2001, BSRBR was established to evaluate the safety of these agents. This paper addresses the safety of anti-TNF therapy in RA with specific reference to serious skin and soft tissue infections (SSSI) and shingles. Methods A cohort of anti-TNF-treated patients was recruited alongside a comparator group with active RA treated with non-biological disease-modifying antirheumatic drugs (nbDMARD). 11 881 anti-TNF and 3673 nbDMARD patients were analysed. Follow-up was by 6-monthly questionnaires to patients and clinicians. Analyses considered SSSI and shingles separately. Incidence rates (IR) were calculated and then compared using survival analyses. Results The crude IR for SSSI were: anti-TNF 1.6/100 patient-years (95% CI 1.4 to 1.8); nbDMARD 0.7/100 patient-years (95% CI 0.5 to 1.0) and shingles: anti-TNF 1.6/100 patient-years (95% CI 1.3 to 2.0); nbDMARD 0.8/100 patient-years (95% CI 0.6 to 1.1). Adjusted HR were SSSI 1.4 (95% CI 0.9 to 2.4), shingles 1.8 (95% CI 1.2 to 2.8). For SSSI, no significant differences were seen between anti-TNF agents. For shingles, the lowest risk was observed for adalimumab (adjusted HR vs nbDMARD) 1.5 (95% CI 1.1 to 2.0) and highest for infliximab (HR 2.2; 95% CI 1.4 to 3.4)). Conclusion A significantly increased risk of shingles was observed in the anti-TNF-treated cohort. The risk of SSSI tended towards being greater with anti-TNF treatment but was not statistically significant. As with any observational dataset cause and effect cannot be established with certainty as residual confounding may remain. This finding would support the evaluation of zoster vaccination in this population. PMID:22532633

Production of lumber, lath, and shingles in 1918

Treesearch

Henry S. Graves

1920-01-01

In this bulletin, which is one of an annual series covering the period 1904 to 1918, inclusive, with the exception of 1914, are detailed statistics of the 1918 production of lumber, lath, and shingles in the continental United States, with comparative figures from previous annual reports.

Integrated residential photovoltaic array development

NASA Astrophysics Data System (ADS)

Shepard, N. F., Jr.

1981-12-01

An advanced, universally-mountable, integrated residential photovoltaic array concept was defined based upon an in-depth formulation and evaluation of three candidate approaches which were synthesized from existing or proposed residential array concepts. The impact of module circuitry and process sequence is considered and technology gaps and performance drivers associated with residential photovoltaic array concepts are identified. The actual learning experience gained from the comparison of the problem areas of the hexagonal shingle design with the rectangular module design led to what is considered an advanced array concept. Building the laboratory mockup provided actual experience and the opportunity to uncover additional technology gaps.

Integrated residential photovoltaic array development

NASA Technical Reports Server (NTRS)

Shepard, N. F., Jr.

1981-01-01

An advanced, universally-mountable, integrated residential photovoltaic array concept was defined based upon an in-depth formulation and evaluation of three candidate approaches which were synthesized from existing or proposed residential array concepts. The impact of module circuitry and process sequence is considered and technology gaps and performance drivers associated with residential photovoltaic array concepts are identified. The actual learning experience gained from the comparison of the problem areas of the hexagonal shingle design with the rectangular module design led to what is considered an advanced array concept. Building the laboratory mockup provided actual experience and the opportunity to uncover additional technology gaps.

19 CFR 134.33 - J-List exceptions.

Code of Federal Regulations, 2014 CFR

2014-04-01

...)). However, in the case of any article described in this list which is imported in a container, the outermost container in which the article ordinarily reaches the ultimate purchaser is required to be marked to.... Scrap and waste. Screws. Shims, track. Shingles (wood), bundles of (except bundles of red-cedar shingles...

19 CFR 134.33 - J-List exceptions.

Code of Federal Regulations, 2013 CFR

2013-04-01

...)). However, in the case of any article described in this list which is imported in a container, the outermost container in which the article ordinarily reaches the ultimate purchaser is required to be marked to.... Scrap and waste. Screws. Shims, track. Shingles (wood), bundles of (except bundles of red-cedar shingles...

19 CFR 134.33 - J-List exceptions.

Code of Federal Regulations, 2012 CFR

2012-04-01

...)). However, in the case of any article described in this list which is imported in a container, the outermost container in which the article ordinarily reaches the ultimate purchaser is required to be marked to.... Scrap and waste. Screws. Shims, track. Shingles (wood), bundles of (except bundles of red-cedar shingles...

Influence of roofing shingles on asphalt concrete mixture properties. Final report

DOT National Transportation Integrated Search

1993-06-01

It is estimated that the production of new roofing shingles generates approximately 1,000,000 tons of waste annually in the U.S., and about 36,000 tons of this waste is in the Twin Cities Metro Area of Minnesota. With another 8.5 million tons of wast...

Asphalt and Wood Shingling. Roofing Workbook and Tests.

ERIC Educational Resources Information Center

Brown, Arthur

This combination workbook and set of tests contains materials on asphalt and wood shingling that have been designed to be used by those studying to enter the roofing and waterproofing trade. It consists of seven instructional units and seven accompanying objective tests. Covered in the individual units are the following topics: shingling…

Design, fabrication, test, and qualification and price analysis of third generation design solar cell modules

NASA Astrophysics Data System (ADS)

Shepard, N. F.

1980-03-01

The Block 4 shingle type module makes it possible to apply a photovoltaic array to the sloping roof of a residential building by simply nailing the overlapping hexagon shaped shingles to the plywood roof sheathing. This third-generation shingle module design consists of nineteen series connected 100 mm diameter solar cells which are arranged in a closely packed hexagon configuration to provide in excess of 75 watts/sq m of exposed module area under standard operating conditions. The solar cells are individually bonded to the embossed underside of a 4.4 mm thick thermally tempered piece of glass. An experimental silicone pottant was used as the transparent bonding adhesive between the cells and glass. The semi-flexible portion of each shingle module is a composite laminate construction consisting of an outer layer of FLEXSEAL bonded to an inner core of closed cell polyethylene foam. Silaprene is used as the substrate laminating adhesive. The module design has satisfactorily survived qualification testing program which includes 50 thermal cycles between -40 and +90 C, a seven day temperature-humidity exposure test, and a wind resistance test.

Design, fabrication, test, and qualification and price analysis of third generation design solar cell modules

NASA Technical Reports Server (NTRS)

Shepard, N. F.

1980-01-01

The Block 4 shingle type module makes it possible to apply a photovoltaic array to the sloping roof of a residential building by simply nailing the overlapping hexagon shaped shingles to the plywood roof sheathing. This third-generation shingle module design consists of nineteen series connected 100 mm diameter solar cells which are arranged in a closely packed hexagon configuration to provide in excess of 75 watts/sq m of exposed module area under standard operating conditions. The solar cells are individually bonded to the embossed underside of a 4.4 mm thick thermally tempered piece of glass. An experimental silicone pottant was used as the transparent bonding adhesive between the cells and glass. The semi-flexible portion of each shingle module is a composite laminate construction consisting of an outer layer of FLEXSEAL bonded to an inner core of closed cell polyethylene foam. Silaprene is used as the substrate laminating adhesive. The module design has satisfactorily survived qualification testing program which includes 50 thermal cycles between -40 and +90 C, a seven day temperature-humidity exposure test, and a wind resistance test.

Summer temperatures of roof assemblies using western redcedar, wood-thermoplastic composite, or fiberglass shingles

Treesearch

Jerrold E. Winandy; H. Michael Barnes; Robert H. Falk

2004-01-01

For over 10 years, the Forest Products Laboratory has been monitoring the temperature histories of roof sheathing, roof rafters, and unventilated attics in outdoor attic structures that simulate typical light-framed construction. This report briefly summarizes findings from the roof temperature assessment project on black and white fiberglass shingles conducted from...

Production of lumber, lath, and shingles in 1917

Treesearch

Franklin H. Smith; Albert H. Pierson

1919-01-01

In this bulletin, which is one of an annual series covering the period 1904 to 1917, inclusive, with the exception of 1914, are detailed statistics of the 1917 production of lumber, lath, and shingles in the continental United States, with comparative figures from previous annual reports. The collection and compilation of the statistics for the Western States was done...

Reducing shingle waste at a manufacturing facility: 1990 MNTAP summer intern report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Menke, D.

1990-12-31

CertainTeed manufactures roofing shingles at it`s Shakopee, MN facility. Two process coating lines, and one assembly line, produce fifteen shingle types in fifteen different colors. The wastes generated by this process were the result of planned and unplanned variations in the continuous production process. Planned variations included changes in color, while felt breaks were common unplanned variations. Five options were identified that could reduce the amount of waste generated: Using a standard procedure for recovering from felt breaks, Creating a process cushion to maintain continuous production in the event of temporary shutdowns, An automated color change process, Manufacture of amore » new product from waste material, Minor process changes to reduce the frequency of breaks.« less

Effectiveness of fire-retardant treatments for shingles after 10 years of outdoor weathering

Treesearch

S. L. LeVan; C. A. Holmes

Some building codes require wood shingles to be fire-retardant treated. Because exterior fire-retardant treatments are subjected to weathering, treatment durability and leach resistance are critical for insuring adequate fire protection. We examined the effectiveness of various fire-retardant treatments on wood after 0, 2, 5, and 10 years of outdoor exposure. We used a...

Thermal load histories for North American roof assembles using various cladding materials including wood-thermoplastic composite shingles

Treesearch

J. E. Winandy

2006-01-01

Since 1991, thermal load histories for various roof cladding types have been monitored in outdoor attic structures that simulate classic North American light-framed construction. In this paper, the 2005 thermal loads for wood-based composite roof sheathing, wood rafters, and attics under wood-plastic composite shingles are compared to common North American roof...

Production of lumber, lath, and shingles in Washington and Oregon 1869-1936.

Treesearch

Herman M. Johnson

1938-01-01

For the information of Government and State agencies and of the public, data on annual lumber, shingle, and lath production in Washington and Oregon during the period 1869-1936 are here presented in tabular and graphic form. These data were obtained by the Forest Service, under cooperative agreement with the Bureau of the Census. They include the product of all mills...

A Review of Methods for the Manufacture of Residential Roofing Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akbari, Hashem; Levinson, Ronnen; Berdahl, Paul

2003-06-01

Shingles, tiles, and metal products comprise over 80% (by roof area) of the California roofing market (54-58% fiberglass shingle, 8-10% concrete tile, 8-10% clay tile, 7% metal, 3% wood shake, and 3% slate). In climates with significant demand for cooling energy, increasing roof solar reflectance reduces energy consumption in mechanically cooled buildings, and improves occupant comfort in non-conditioned buildings. This report examines methods for manufacturing fiberglass shingles, concrete tiles, clay tiles, and metal roofing. The report also discusses innovative methods for increasing the solar reflectance of these roofing materials. We have focused on these four roofing products because they aremore » typically colored with pigmented coatings or additives. A better understanding of the current practices for manufacturing colored roofing materials would allow us to develop cool colored materials creatively and more effectively.« less

An active-learning laboratory on immunizations.

PubMed

Donohoe, Krista L; Mawyer, Tonya M; Stevens, J Tyler; Morgan, Laura A; Harpe, Spencer E

2012-12-12

To implement and evaluate an active-learning laboratory activity to teach pharmacy students about influenza, pneumococcal, and shingles vaccines. The laboratory session was divided into 6 immunization stations: 3 stations on influenza including a pediatrics station, and 1 station each for pneumococcal, shingles, and anaphylaxis. Although 118 of 123 (95.9%) students had completed an immunization training certificate prior to attending the laboratory, the average score on a pre-assessment to measure immunization knowledge and confidence was 56%. The post-assessment score was 87.4%. Students' confidence improved by 18.7% to 51.2% in each of the 5 areas assessed. Most respondents rated the activity overall as good or excellent on a post-activity evaluation. An active-learning approach to teaching immunizations allowed students to gain knowledge in simulated real-world experiences and reinforced key concepts on influenza, pneumococcal, and shingles vaccines.

Evaluation of the combined effects of reclaimed asphalt pavement (RAP), reclaimed asphalt shingles (RAS), and different virgin binder sources on the performance of blended binders for mixes with higher percentages of RAP and RAS : a research report from t

DOT National Transportation Integrated Search

2015-11-01

This report summarizes the main findings from a project funded by the National Center for : Sustainable Transportation (NCST) to investigate the use of higher percentages of reclaimed : asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) as a...

Herpes zoster with dysfunction of bladder and anus.

PubMed

Jellinek, E H; Tulloch, W S

1976-12-04

Herpes zoster may give rise to dysfunction of bladder and anus. Mucosal lesions have been reported, and 7 cases are described with retention, loss of sensation, or incontinence. Sacral shingles is associated with sensory loss and flaccid detrusor paralysis. Lumbar shingles may cause retention, and zoster at higher levels can also damage the spinal cord. Recovery is usually complete. The implication for schemes of bladder innervation is discussed.

Evaluation of the combined effects of reclaimed asphalt pavement (RAP), reclaimed asphalt shingles (RAS), and different virgin binder sources on the performance of blended binders for mixes with higher percentages of RAP and RAS : a national center for su

DOT National Transportation Integrated Search

2015-11-01

This report summarizes the main findings from a project funded by the National Center for : Sustainable Transportation (NCST) to investigate the use of higher percentages of reclaimed : asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) as a...

Controlling Energy Consumption in Single Buildings.

DTIC Science & Technology

1982-07-01

Asphalt shingles Apartment 1/2" plywood sheathing; 2"x4 ൦% sidewalls; 0% 1/2" plywood Building stud framing (16" c.c.); 2- endwalls. sheathing,3-1/2...cycling does produce additional wear on belts and motor starting circuits. Further, it may affect building air balance between building zones if more...4" common brick; 1/2" Single-strenght sheet; Asphalt shingles; Apartment plywood shetthing; light 30% sidewalls; 0% 1/2" plywood Buiiding framing; no

Development and testing of shingle-type solar cell molecules

NASA Technical Reports Server (NTRS)

Shepard, N. F.

1978-01-01

The details of a shingle module design which produces in excess of 97 watts/sq m of module area at 1 kW/sq m insolation and at 60 C are reported. This selected design employs a tempered glass coverplate to provide the primary solar cell structural support. The fabrication and testing of a preproduction module of this design has demonstrated that this selected approach will meet the environmental testing requirements imposed by the contract.

A Full Overhead Cost Model for the U.S. Coast Guard Yard, Curtis Bay, Maryland.

DTIC Science & Technology

1982-06-01

80.0 STORAGE SHED B 43 A 35000.50 700.00 B 50 I IMPROVE SHINGLES 1750.43 40.70 B 75 I RELOCTE FLAMB STOR 22432.18 1246.23 81.0 FLAMABLE STORAGE B 43 A...35000.50 700.00 B 45 I UNKWN IMPRVMNT 50.48 1.04 B 50 I IMPROVE SHINGLES 1750.43 40.70 B 75 I RELOCTE FLAMB STOR 22432.18 1246.22 85.0 STORAGE SHED B

42. GARRET, SOUTHWEST CORNER. The roof rafters have been notched ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

42. GARRET, SOUTHWEST CORNER. The roof rafters have been notched for shingle lath. In some places the notches and lath do not align. Attached to each joist are furring strips for the 1812 ceiling, allowing it to be lowered about one inch below the under surfaces of the joists. Note that the 1851 shingles were left in place when the 1873-74 tin roof was added. - Twelfth Street Meeting House, 20 South Twelfth Street, Philadelphia, Philadelphia County, PA

DEFENSE INFRASTRUCTURE: DOD Needs to Determine and Use the Most Economical Building Materials and Methods When Acquiring New Permanent Facilities

DTIC Science & Technology

2010-04-01

could result in higher maintenance costs. For example, a wood-frame building finished with a shingle roof might have higher maintenance costs over the...long term compared to a building finished with a steel roof because the shingles would have to be replaced periodically over the life of the...because the exterior surfaces and interior finishes for both the midrise building and separate housing units were very similar, no difference in

Shingle assembly

DOEpatents

Dinwoodie, Thomas L.

2007-02-20

A barrier, such as a PV module, is secured to a base by a support to create a shingle assembly with a venting region defined between the barrier and base for temperature regulation. The first edge of one base may be interengageable with the second edge of an adjacent base to be capable of resisting first and second disengaging forces oriented perpendicular to the edges and along planes oriented parallel to and perpendicular to the base. A deflector may be used to help reduce wind uplift forces.

Aerothermoelastic response analysis for C/SiC panel of ceramic matrix composite shingle thermal protection system

NASA Astrophysics Data System (ADS)

Huo, Lin; Cheng, Xing-Hua; Yang, Tao

2015-05-01

This paper presents a study of aerothermoelastic response of a C/SiC panel, which is a primary structure for ceramic matrix composite shingle thermal protection system for hypersonic vehicles. It is based on a three dimensional thermal protection shingle panel on a quasi-waverider vehicle model. Firstly, the Thin Shock Layer and piston theory are adopted to compute the aerodynamic pressure of rigid body and deformable body, and a series of engineering methods are used to compute the aerodynamic heating. Then an aerothermoelastic loosely-coupled time marching strategy and self-adapting aerodynamic heating time step are developed to analyze the aerothermoelastic response of the panel, with an aerodynamic heating and temperature field coupling parameter selection method being adopted to increase the efficiency. Finally, a few revealing conclusions are reached by analyzing how coupling at different degrees influences the quasi-static aerothermoelastic response of the panel and how aerodynamic pressure of rigid body time step influences the quasi-static aerothermoelastic response on a glide trajectory.

Roofing as a source of nonpoint water pollution.

PubMed

Chang, Mingteh; McBroom, Matthew W; Scott Beasley, R

2004-12-01

Sixteen wooden structures with two roofs each were installed to study runoff quality for four commonly used roofing materials (wood shingle, composition shingle, painted aluminum, and galvanized iron) at Nacogdoches, Texas. Each roof, either facing NW or SE, was 1.22 m wide x 3.66 m long with a 25.8% roof slope. Thus, there were 32 alternatively arranged roofs, consisting of four roof types x two aspects x four replicates, in the study. Runoff from the roofs was collected through galvanized gutters, downspouts, and splitters. The roof runoff was compared to rainwater collected by a wet/dry acid rain collector for the concentrations of eight water quality variables, i.e. Cu(2+), Mn(2+), Pb(2+), Zn(2+), Mg(2+), Al(3+), EC and pH. Based on 31 storms collected between October 1997 and December 1998, the results showed: (1) concentrations of pH, Cu, and Zn in rainwater already exceed the EPA freshwater quality standards even without pollutant inputs from roofs, (2) Zn and Cu, the two most serious pollutants in roof runoff, exceeded the EPA national freshwater water quality standards in virtually 100% and more than 60% of the samples, respectively, (3) pH, EC, and Zn were the only three variables significantly affected by roofing materials, (4) differences in Zn concentrations were significant among all roof types and between all roof runoff and rainwater samples, (5) although there were no differences in Cu concentrations among all roof types and between roof runoff and rainwater, all means and medians of runoff and rainwater exceeded the national water quality standards, (6) water quality from wood shingles was the worst among the roof types studied, and (7) although SE is the most frequent and NW the least frequent direction for incoming storms, only EC, Mg, Mn, and Zn in wood shingle runoff from the SE were significantly higher than those from the NW; the two aspects affected no other elements in runoff from the other three roof types. Also, Zn concentrations from new wood-shingle roofs were significantly higher than those from aged roofs of a previous study. The study demonstrated that roofs could be a serious source of nonpoint water pollution. Since Zn is the most serious water pollutant and wood shingle is the worst of the four roof types, using less compounds and materials associated with Zn along with good care and maintenance of roofs are critical in reducing Zn pollution in roof runoff.

Chickenpox, chickenpox vaccination, and shingles

PubMed Central

Welsby, P D

2006-01-01

Chickenpox in the United Kingdom, where vaccination is not undertaken, has had a stable epidemiology for decades and is a routine childhood illness. Because of vaccination, chickenpox is now a rarity in the USA. In the UK vaccination is not done because introduction of a routine childhood vaccination might drive up the age at which those who are non‐immune get the illness (chickenpox tends to be more severe the older you are), and the incidence of shingles may increase. The United Kingdom is waiting to see what happens in countries where vaccination is routine. PMID:16679476

Operation SHINGLE (Anzio) 22 January-1 February 1944, Offensive, Deliberate Assault, Amphibious

DTIC Science & Technology

1984-05-21

had la’-re diverse supply dumps easily accessible by truck or rail. AS EsU ly de -mands increased’along with allied air attacks, naval --:~-~oac:ore...Planning called -,r the 7-a-tical Air Corps, aided by strategic air assts, t:-’ zcmin enemy airfields prior to D-lay to estrcy c.-=y a: fcrces andi to...00~ ._ --- ?d:-/ ’- CSI BATTLEBOOK / / CS B ATTLEOOK 3-C OPERATION SHINGLE Combat Studies Institute Fort Leaven4qorth, Kansas DTIC EI.% EE--" DE EU

A 70-year-old woman with shingles: review of herpes zoster.

PubMed

Whitley, Richard J

2009-07-01

Herpes zoster is a common late complication of varicella-zoster virus exposure and can be further complicated by postherpetic neuralgia. Ms A is a 70-year-old woman with shingles and Ramsay-Hunt syndrome who presented to the emergency department with a few days of earache followed by pain in the back of her head. Using her case as a springboard, the diagnosis, natural history, and treatment of herpes zoster and postherpetic neuralgia in immunocompetent older adults are reviewed, in addition to the effectiveness of the herpes zoster vaccine.

Sociodemographic predictors of variation in coverage of the national shingles vaccination programme in England, 2014/15.

PubMed

Ward, Charlotte; Byrne, Lisa; White, Joanne M; Amirthalingam, Gayatri; Tiley, Karen; Edelstein, Michael

2017-04-25

In September 2013, England introduced a shingles vaccination programme to reduce incidence and severity of shingles in the elderly. This study aims to assess variation in vaccine coverage with regards to selected sociodemographic factors to inform activities for improving equity of the programme. Eligible 70year-olds were identified from a national vaccine coverage dataset in 2014/15 that includes 95% of GPs in England. NHS England Local Team (LT) and index of multiple deprivation (IMD) scores were assigned to patients based on GP-postcode. Vaccine coverage (%) with 95% confidence intervals (CIs), were calculated overall and by LT, ethnicity and IMD, using binomial regression. Of 502,058 eligible adults, 178,808 (35.6%) had ethnicity recorded. Crude vaccine coverage was 59.5% (95%CI: 59.3-59.7). Coverage was lowest in London (49.6% coverage, 95%CI: 49.0-50.2), and compared to this coverage was significantly higher in all other LTs (+6.3 to +10.4, p<0.001) after adjusting for ethnicity and IMD. Coverage decreased with increasing deprivation and was 8.2% lower in the most deprived (95%CI: 7.3-9.1) compared with the least deprived IMD quintile (64.1% coverage, 95%CI: 63.6-64.6), after adjustment for ethnicity and LT. Compared with White-British (60.7% coverage, 95%CI: 60.5-61.0), other ethnic groups had between 4.0% (Indian) and 21.8% (Mixed: White and Black African) lower coverage. After adjusting for IMD and LT, significantly lower coverage by ethnicity persisted in all groups, except in Mixed: Other, Indian and Bangladeshi compared with White-British. After taking geography and deprivation into account, shingles vaccine coverage varied by ethnicity. White-British, Indian and Bangladeshi groups had highest coverage; Mixed: White and Black African, and Black-other ethnicities had the lowest. Patients' ethnicity and IMD are predictors of coverage which contribute to, but do not wholly account for, geographical variation coverage. Interventions to address service-related, sociodemographic and ethnic inequalities in shingles vaccine coverage are required. Copyright © 2017 Elsevier Ltd. All rights reserved.

The design and development of a rectangular, shingle-type photovoltaic module

NASA Astrophysics Data System (ADS)

Shepard, N. F., Jr.

A shingle-type photovoltaic module has been designed and developed to meet the requirements of specifications for residential applications. The module is ideally suited for installation directly to the sheathing of a sloping, south-facing roof of a residential, industrial, or commercial building. The design requirements are examined, taking into account also module safety requirements. Aspects of module design and analysis are discussed, giving attention to installation details, solar cells and electrical circuit design, the encapsulation system, substrate lamination, and the module-to-module interconnecting cable. Details of module assembly experience and test and outdoor exposure experience are also considered.

The design and development of a rectangular, shingle-type photovoltaic module

NASA Technical Reports Server (NTRS)

Shepard, N. F., Jr.

1982-01-01

A shingle-type photovoltaic module has been designed and developed to meet the requirements of specifications for residential applications. The module is ideally suited for installation directly to the sheathing of a sloping, south-facing roof of a residential, industrial, or commercial building. The design requirements are examined, taking into account also module safety requirements. Aspects of module design and analysis are discussed, giving attention to installation details, solar cells and electrical circuit design, the encapsulation system, substrate lamination, and the module-to-module interconnecting cable. Details of module assembly experience and test and outdoor exposure experience are also considered.

Latent Herpes Viral Reactivation in Astronauts

NASA Technical Reports Server (NTRS)

Pierson, D. L.; Mehta, S. K.; Stowe, R.

2008-01-01

Latent viruses are ubiquitous and reactivate during stressful periods with and without symptoms. Latent herpes virus reactivation is used as a tool to predict changes in the immune status in astronauts and to evaluate associated health risks. Methods: Viral DNA was detected by real time polymerase chain reaction in saliva and urine from astronauts before, during and after short and long-duration space flights. Results and Discussion: EpsteinBarr virus (EBV), cytomegalovirus (CMV), and varicella zoster virus (VZV) reactivated, and viral DNA was shed in saliva (EBV and VZV) or urine (CMV). EBV levels in saliva during flight were 10fold higher than baseline levels. Elevations in EBV specific CD8+ T-cells, viral antibody titers, and specific cytokines were consistent with viral reactivation. Intracellular levels of cytokines were reduced in EBVspecific Tcells. CMV, rarely present in urine of healthy individuals, was shed in urine of 27% of astronauts during all phases of spaceflight. VZV, not found in saliva of asymptomatic individuals, was found in saliva of 50% of astronauts during spaceflight and 35 days after flight. VZV recovered from astronaut saliva was found to be live, infectious virus. DNA sequencing demonstrated that the VZV recovered from astronauts was from the common European strain of VZV. Elevation of stress hormones accompanied viral reactivation indicating involvement of the hypothalmic-pituitary-adrenal and sympathetic adrenal-medullary axes in the mechanism of viral reactivation in astronauts. A study of 53 shingles patients found that all shingles patients shed VZV DNA in their saliva and the VZV levels correlated with the severity of the disease. Lower VZV levels in shingles patients were similar to those observed in astronauts. We proposed a rapid, simple, and cost-effective assay to detect VZV in saliva of patients with suspected shingles. Early detection of VZV infection allows early medical intervention.

Long-Term Effectiveness of the Live Zoster Vaccine in Preventing Shingles: A Cohort Study.

PubMed

Baxter, Roger; Bartlett, Joan; Fireman, Bruce; Marks, Morgan; Hansen, John; Lewis, Edwin; Aukes, Laurie; Chen, Yong; Klein, Nicola P; Saddier, Patricia

2018-01-01

A live attenuated zoster vaccine was licensed in the United States in 2006 for prevention of shingles in persons aged 60 years or older; the indication was extended in 2011 to cover those aged 50-59 years. We assessed vaccine effectiveness (VE) against shingles for 8 years after immunization at Kaiser Permanente Northern California. VE was estimated by Cox regression with a calendar timeline that was stratified by birth year. We adjusted for demographics and time-varying covariates, including comorbidities and immune compromise. From 2007 to 2014, 1.4 million people entered the study when they became age eligible for vaccination; 392,677 (29%) received the zoster vaccine. During 5.8 million person-years of follow-up, 48,889 cases of shingles were observed, including 5,766 among vaccinees. VE was 49.1% (95% confidence interval (CI): 47.5, 50.6) across all follow-up. VE was 67.5% (95% CI: 65.4, 69.5) during the first year after vaccination, waned to 47.2% (95% CI: 44.1, 50.1) during the second year after vaccination, and then waned more gradually through year 8, when VE was 31.8% (95% CI: 15.1, 45.2). Unexpectedly, VE in persons vaccinated when they were aged 80 years or older was similar to VE in younger vaccinees, and VE in persons vaccinated when immune compromised was similar to VE in persons vaccinated when immune competent. © The Author(s) 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Incidence and risk of hospitalisation due to shingles and chickenpox in patients with rheumatic diseases treated with TNF antagonists.

PubMed

García-Doval, Ignacio; Pérez-Zafrilla, Beatriz; Descalzo, Miguel Angel; Roselló, Rosa; Hernández, Maria Victoria; Gómez-Reino, Juan J; Carmona, Loreto

2010-10-01

To estimate the incidence of hospitalisation due to varicella zoster virus (VZV) infection in patients treated with tumour necrosis factor (TNF) antagonists for inflammatory rheumatic conditions and to compare it with the expected rate in the general population. Secondary data analysis was performed of two large databases: (1) the national registry of rheumatic diseases patients treated with biological agents (BIOBADASER); and (2) the national hospital discharge database Conjunto Mínimo Básico de Datos al Alta Hospitalaria. Hospitalisations due to shingles or chickenpox were analysed. For each condition the incidence rate (IR) and the age and gender standardised IR per 100,000 person-years plus the standardised incidence ratio (SIR) and the standardised incidence difference (SID) were estimated. In patients exposed to TNF antagonists, the estimated IR of hospitalisation due to shingles was 32 cases per 100,000 patient-years (95% CI 14 to 78), the expected rate in the general population was 3.4 (95% CI 3.2 to 3.5), the SIR was 9 (95% CI 3 to 20) and the SID was 26 (95% CI 14 to 37). The estimated IR of hospitalisation due to chickenpox was 26 cases per 100,000 (95% CI 10 to 69), the expected rate was 1.9 (95% CI 1.8 to 2.0), the SIR was 19 (95% CI 5 to 47) and the SID 33 (95% CI 21 to 45). Patients suffering rheumatic diseases exposed to TNF antagonists are hospitalised due to VZV infections significantly more frequently than expected in the general population. Since the absolute IR of hospitalisations due to chickenpox and shingles is low in these patients, the implementation of risky preventive measures may not be justified at present.

Shingles (herpes zoster) vaccine (zostavax(®)): a review of its use in the prevention of herpes zoster and postherpetic neuralgia in adults aged ≥50 years.

PubMed

Keating, Gillian M

2013-07-01

The live, attenuated shingles (herpes zoster) vaccine Zostavax(®) is approved in the EU for use in the prevention of herpes zoster and postherpetic neuralgia in adults aged ≥50 years. In adults aged ≥60 years, zoster vaccine reduced the burden of illness associated with herpes zoster, with reductions in the incidence of postherpetic neuralgia and herpes zoster, according to the results of the Shingles Prevention Study. Results of subsequent Short- and Long-Term Persistence Substudies indicate that the efficacy of zoster vaccine is maintained in the longer term, albeit with a gradual decline over time. In the Zostavax Efficacy and Safety Trial, zoster vaccine reduced the incidence of herpes zoster in adults aged 50-59 years. Findings of these studies are supported by the results of large, retrospective, cohort studies. Zoster vaccine was generally well tolerated, with injection-site adverse events being the most commonly reported adverse events. In conclusion, zoster vaccine provides an important opportunity to reduce the burden of illness associated with herpes zoster by reducing the incidence of herpes zoster and postherpetic neuralgia.

Incidence of Latent Virus Shedding during Space Flight

NASA Technical Reports Server (NTRS)

Mehta, Satish K.; Cohrs, Randall J.; Gilden, Donald H.; Tyring, Stephen K.; Ott, C. Mark; Pierson, Duane L.

2008-01-01

Measurements of immune parameters of both cellular and innate immunity indicate alterations in immune function in astronauts. Immune changes are due to stress and perhaps other factors associated with launch, flight, and landing phases. Medical relevance of observed changes is not known. The reactivation of latent viruses has been identified as an important in vivo indicator of clinically relevant immune changes. The polymerase chain reaction (PCR) was used to detect the presence of specific viral DNA in body fluids. Initial studies demonstrated Epstein-Barr virus (EBV) reactivation during all 3 mission phases. EBV is shed in saliva following reactivation from B-cells. Incidence of EBV in saliva was higher than control subjects during all 3 mission phases. However, quantitative PCR revealed 10-fold higher levels of EBV DNA present in saliva collected during flight than found in pre- and post flight specimens. To determine if other latent viruses showed similar effects, cytomegalovirus (CMV), another herpes virus, shed in urine following reactivation was studied. A very low incidence (less than 2%) of CMV in urine is found in healthy, lowstressed individuals. However, 25-50% of astronauts shed CMV in their urine before, during, or after flight. Our studies are now focused on varicella-zoster virus (VZV), the etiological agent of chicken-pox during childhood and shingles later in life. We demonstrated reactivation of VZV and shedding of the virus during and after spaceflight in saliva of astronauts with no sign of active infection or symptoms. The maximum shedding of VZV occurred during the flight phase and diminishes rapidly during the first five days after landing. We have utilized the same PCR assay for VZV in a clinical study of shingles patients. Generally, shingles patients shed much more VZV in saliva than astronauts. However, the VZV levels in astronauts overlap with the lower range of VZV numbers in shingles patients. Saliva from shingles patients and astronauts were cultured and infectious VZV was recovered from both groups. We have concluded that multiple latent viruses do reactivate before, during, and after spaceflight and serve as very sensitive indicators for diminished cellular immunity. Future plans will be focused on the clinical risks posed by the reactivation of these viruses. Initial efforts will determine the effect of longer missions on the International Space Station on the reactivation patterns of these viruses.

Meningitis Myths and Facts

MedlinePlus

... Pertussis (Whooping Cough) Pneumococcal Disease Polio Respiratory Syncytial Virus (RSV) Rotavirus Rubella (German Measles) Shingles (Herpes Zoster) Tetanus (Lockjaw) Advanced Search » Professional ...

Modeling timelines for translational science in cancer; the impact of technological maturation

PubMed Central

McNamee, Laura M.; Ledley, Fred D.

2017-01-01

This work examines translational science in cancer based on theories of innovation that posit a relationship between the maturation of technologies and their capacity to generate successful products. We examined the growth of technologies associated with 138 anticancer drugs using an analytical model that identifies the point of initiation of exponential growth and the point at which growth slows as the technology becomes established. Approval of targeted and biological products corresponded with technological maturation, with first approval averaging 14 years after the established point and 44 years after initiation of associated technologies. The lag in cancer drug approvals after the increases in cancer funding and dramatic scientific advances of the 1970s thus reflects predictable timelines of technology maturation. Analytical models of technological maturation may be used for technological forecasting to guide more efficient translation of scientific discoveries into cures. PMID:28346525

Development and Testing of Shingle-type Solar Cell Modules

NASA Technical Reports Server (NTRS)

Shepard, N. F., Jr.

1979-01-01

The design, development, fabrication and testing of a shingle-type terrestrial solar cell module which produces 98 watts/sq m of exposed module area at 1 kW/sq m insolation and 61 C are reported. These modules make it possible to easily incorporate photovoltaic power generation into the sloping roofs of residential or commercial buildings by simply nailing the modules to the plywood roof sheathing. This design consists of nineteen series-connected 53 mm diameter solar cells arranged in a closely packed hexagon configuration. These cells are individually bonded to the embossed surface of a 3 mm thick thermally tempered hexagon-shaped piece of glass. Polyvinyl butyral is used as the laminating adhesive.

Influence of writing and reading intertrack interferences in terms of bit aspect ratio in shingled magnetic recording

NASA Astrophysics Data System (ADS)

Nobuhara, Hirofumi; Okamoto, Yoshihiro; Yamashita, Masato; Nakamura, Yasuaki; Osawa, Hisashi; Muraoka, Hiroaki

2014-05-01

In this paper, we investigate the influence of the writing and reading intertrack interferences (ITIs) in terms of bit aspect ratio (BAR) in shingled magnetic recording by computer simulation using a read/write model which consists of a writing process based on Stoner-Wohlfarth switching asteroid by a one-side shielded isosceles triangular write head and a reading process by an around shielded read head for a discrete Voronoi medium model. The results show that BAR should be 3 to reduce the influence of writing and reading ITIs, media noise, and additive white Gaussian noise in an assumed areal density of 4.61Tbpsi.

Computer-Aided Analysis of Patents for Product Technology Maturity Forecasting

NASA Astrophysics Data System (ADS)

Liang, Yanhong; Gan, Dequan; Guo, Yingchun; Zhang, Peng

Product technology maturity foresting is vital for any enterprises to hold the chance for innovation and keep competitive for a long term. The Theory of Invention Problem Solving (TRIZ) is acknowledged both as a systematic methodology for innovation and a powerful tool for technology forecasting. Based on TRIZ, the state -of-the-art on the technology maturity of product and the limits of application are discussed. With the application of text mining and patent analysis technologies, this paper proposes a computer-aided approach for product technology maturity forecasting. It can overcome the shortcomings of the current methods.

Technology Maturation in Preparation for the Cryogenic Propellant Storage and Transfer (CPST) Technology Demonstration Mission (TDM)

NASA Technical Reports Server (NTRS)

Meyer, Michael L.; Doherty, Michael P.; Moder, Jeffrey P.

2014-01-01

In support of its goal to find an innovative path for human space exploration, NASA embarked on the Cryogenic Propellant Storage and Transfer (CPST) Project, a Technology Demonstration Mission (TDM) to test and validate key cryogenic capabilities and technologies required for future exploration elements, opening up the architecture for large in-space cryogenic propulsion stages and propellant depots. Recognizing that key Cryogenic Fluid Management (CFM) technologies anticipated for on-orbit (flight) demonstration would benefit from additional maturation to a readiness level appropriate for infusion into the design of the flight demonstration, the NASA Headquarters Space Technology Mission Directorate (STMD) authorized funding for a one-year technology maturation phase of the CPST project. The strategy, proposed by the CPST Project Manager, focused on maturation through modeling, concept studies, and ground tests of the storage and fluid transfer of CFM technology sub-elements and components that were lower than a Technology Readiness Level (TRL) of 5. A technology maturation plan (TMP) was subsequently approved which described: the CFM technologies selected for maturation, the ground testing approach to be used, quantified success criteria of the technologies, hardware and data deliverables, and a deliverable to provide an assessment of the technology readiness after completion of the test, study or modeling activity. The specific technologies selected were grouped into five major categories: thick multilayer insulation, tank applied active thermal control, cryogenic fluid transfer, propellant gauging, and analytical tool development. Based on the success of the technology maturation efforts, the CPST project was approved to proceed to flight system development.

Steep-Slope Assembly Testing of Clay and Concrete Tile With and Without Cool Pigmented Colors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, William A

Cool color pigments and sub-tile venting of clay and concrete tile roofs significantly impact the heat flow crossing the roof deck of a steep-slope roof. Field measures for the tile roofs revealed a 70% drop in the peak heat flow crossing the deck as compared to a direct-nailed asphalt shingle roof. The Tile Roofing Institute (TRI) and its affiliate members are keenly interested in documenting the magnitude of the drop for obtaining solar reflectance credits with state and federal "cool roof" building efficiency standards. Tile roofs are direct-nailed or are attached to a deck with batten or batten and counter-battenmore » construction. S-Misson clay and concrete tile roofs, a medium-profile concrete tile roof, and a flat slate tile roof were installed on fully nstrumented attic test assemblies. Temperature measures of the roof, deck, attic, and ceiling, heat flows, solar reflectance, thermal emittance, and the ambient weather were recorded for each of the tile roofs and also on an adjacent attic cavity covered with a conventional pigmented and directnailed asphalt shingle roof. ORNL measured the tile's underside temperature and the bulk air temperature and heat flows just underneath the tile for batten and counter-batten tile systems and compared the results to the conventional asphalt shingle.« less

Prevent Shingles

MedlinePlus

... Emergency Preparedness & Response Environmental Health Healthy Living Injury, Violence & Safety Life Stages & Populations Travelers’ Health Workplace Safety & Health Features Media Sign up for Features Get Email Updates To ...

Community and patient values for preventing herpes zoster.

PubMed

Lieu, Tracy A; Ortega-Sanchez, Ismael; Ray, G Thomas; Rusinak, Donna; Yih, W Katherine; Choo, Peter W; Shui, Irene; Kleinman, Ken; Harpaz, Rafael; Prosser, Lisa A

2008-01-01

The US Advisory Committee on Immunization Practices has recently recommended a new vaccine against herpes zoster (shingles) for routine use in adults aged > or =60 years. However, estimates of the cost effectiveness of this vaccine vary widely, in part because of gaps in the data on the value of preventing herpes zoster. Our aims were to (i) generate comprehensive information on the value of preventing a range of outcomes of herpes zoster; (ii) compare these values among community members and patients with shingles and post-herpetic neuralgia (PHN); and (iii) identify clinical and demographic characteristics that explain the variation in these values. Community members drawn from a nationally representative survey research panel (n = 527) completed an Internet-based survey using time trade-off and willingness-to-pay questions to value a series of scenarios that described cases of herpes zoster with varying pain intensities (on a scale of 0 to 10, where 0 represents no pain and 10 represents the worst imaginable pain) and duration (30 days to 1 year). Patients with shingles (n = 382) or PHN (n = 137) [defined as having symptoms for > or =90 days] from two large healthcare systems completed telephone interviews with similar questions to the Internet-based survey and also answered questions about their current experience with herpes zoster. We constructed generalized linear mixed models to evaluate the associations between demographic and clinical characteristics, the length and intensity of the health states and time trade-off and willingness-to-pay values. In time trade-off questions, community members offered a mean of 89 (95% CI 24, 182) discounted days to avoid the least severe scenario (pain level of 3 for 1 month) and a mean of 162 (95% CI 88, 259) discounted days to avoid the most severe scenario (pain level of 8 for 12 months). Compared with patients with shingles, community members traded more days to avoid low-severity scenarios but similar numbers of days to avoid high-severity scenarios. Compared with patients with PHN, community members traded fewer days to avoid high-severity scenarios. In multivariate analyses, older age was the only characteristic significantly associated with higher time trade-off values. In willingness-to-pay questions, community members offered a mean of $US450 (95% CI 203, 893) to avoid pain of level 3 for 1 month and a mean of $US1384 (95% CI 873, 2050) [year 2005 values] to avoid pain of level 8 for 12 months. Community members traded less money than patients with either shingles or PHN to avoid both low- and high-severity scenarios (p-values <0.05 to <0.001). In multivariate models, male gender, higher income and having experienced shingles or PHN were associated with higher willingness to pay to avoid herpes zoster. When patients were asked to assign a value to avoiding their own case of herpes zoster, those with shingles assigned a mean of 67 days or $US2319, while those with PHN assigned a mean of 206 days or $US18 184. Both the time and monetary value traded were associated with the maximum intensity of the pain the individual had experienced, but neither was associated with the duration of the pain. We believe that this study provides the most comprehensive information to date on the value individuals place on preventing herpes zoster, and it includes the only such valuation from nationally representative community members as well as patients with herpes zoster. Community members would trade substantial amounts of time or money to avoid herpes zoster, even in the least severe scenarios. The time trade-off results in this study may differ from those in other studies because of important differences in methods of assessing health utilities. Consideration of both community and patient perspectives is crucial to help decision makers fully determine the implications of their policies now that a vaccine against herpes zoster is available.

Shingles Transmission

MedlinePlus

... Clinical Overview Diagnosis & Testing Prevention in Health Care Settings Laboratory Testing Collecting VZV Specimens CDC National VZV Laboratory Surveillance Resources & References Multimedia Related Links Medline Plus NIH SeniorHealth ...

As Technologies for Nucleotide Therapeutics Mature, Products Emerge.

PubMed

Beierlein, Jennifer M; McNamee, Laura M; Ledley, Fred D

2017-12-15

The long path from initial research on oligonucleotide therapies to approval of antisense products is not unfamiliar. This lag resembles those encountered with monoclonal antibodies, gene therapies, and many biological targets and is consistent with studies of innovation showing that technology maturation is a critical determinant of product success. We previously described an analytical model for the maturation of biomedical research, demonstrating that the efficiency of targeted and biological development is connected to metrics of technology growth. The present work applies this model to characterize the advance of oligonucleotide therapeutics. We show that recent oligonucleotide product approvals incorporate technologies and targets that are past the established point of technology growth, as do most of the oligonucleotide products currently in phase 3. Less mature oligonucleotide technologies, such as miRNAs and some novel gene targets, have not passed the established point and have not yielded products. This analysis shows that oligonucleotide product development has followed largely predictable patterns of innovation. While technology maturation alone does not ensure success, these data show that many oligonucleotide technologies are sufficiently mature to be considered part of the arsenal for therapeutic development. These results demonstrate the importance of technology assessment in strategic management of biomedical technologies. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

About Chickenpox

MedlinePlus

... Resources Multimedia Related Links Medline Plus Shingles About Chickenpox Language: English Español (Spanish) Recommend on Facebook Tweet Share Compartir Chickenpox is a very contagious disease caused by the ...

Technology Solutions Case Study: Field Testing an Unvented Roof with Asphalt Shingles in a Cold Climate

DOE Office of Scientific and Technical Information (OSTI.GOV)

K. Ueno and J. Lstiburek

2015-09-01

Test houses with unvented roof assemblies were built to measure long-term moisture performance, in the Chicago area (5A) and the Houston area (2A). The Chicago-area test bed had seven experimental rafter bays, including a "control" vented compact roof, and six unvented roof variants with cellulose or fiberglass insulation. The interior was run at 50% RH. All roofs except the vented cathedral assembly experienced wood moisture contents and RH levels high enough to constitute failure. Disassembly at the end of the experiment showed that the unvented fiberglass roofs had wet sheathing and mold growth. In contrast, the cellulose roofs only hadmore » slight issues, such as rusted fasteners and sheathing grain raise.« less

Performance Evaluation of Advanced Retrofit Roof Technologies Using Field-Test Data Phase Three Final Report, Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biswas, Kaushik; Childs, Phillip W; Atchley, Jerald Allen

2014-05-01

This article presents various metal roof configurations that were tested at Oak Ridge National Laboratory in Tennessee, U.S.A. between 2009 and 2013, and describes their potential for reducing the attic-generated space conditioning loads. These roofs contained different combinations of phase change material, rigid insulation, low emittance surface and above-sheathing ventilation, with standing-seam metal panels on top. These roofs were designed to be installed on existing roofs decks, or on top of asphalt shingles for retrofit construction. All the tested roofs showed the potential for substantial energy savings compared to an asphalt shingle roof, which was used as a control formore » comparison. The roofs were constructed on a series of adjacent attics separated at the gables using thick foam insulation. The attics were built on top of a conditioned room. All attics were vented at the soffit and ridge. The test roofs and attics were instrumented with an array of thermocouples. Heat flux transducers were installed in the roof deck and attic floor (ceiling) to measure the heat flows through the roof and between the attic and conditioned space below. Temperature and heat flux data were collected during the heating, cooling and swing seasons over a 3 year period. Data from previous years of testing have been published. Here, data from the latest roof configurations being tested in year 3 of the project are presented. All test roofs were highly effective in reducing the heat flows through the roof and ceiling, and in reducing the diurnal attic temperature fluctuations.« less

7 CFR 319.40-1 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... permit, without being issued a specific permit. Humus, compost, and litter. Partially or wholly decayed... shavings; pickets; stakes; shingles; solid wood packing materials; humus; compost; litter; and wooden...

Shingles (Herpes Zoster) Vaccine (Zostavax(®)): A Review in the Prevention of Herpes Zoster and Postherpetic Neuralgia.

PubMed

Keating, Gillian M

2016-06-01

Zostavax(®) is a live attenuated shingles (herpes zoster) vaccine approved in the EU for the prevention of herpes zoster (HZ) and postherpetic neuralgia (PHN) in adults aged ≥50 years. Zoster vaccine protected against HZ in adults aged 50-59 years (ZEST trial) and ≥60 years [Shingles Prevention Study (SPS)], and also reduced the burden of illness associated with HZ and the risk of PHN in adults aged ≥60 years (SPS). A large amount of real-world data also supports the efficacy of zoster vaccine. Results of the SPS Short- and Long-Term Persistence Substudies and real-world studies indicate that zoster vaccine provided continued benefit in the longer term, albeit with a gradual decline in vaccine efficacy over time; long-term effectiveness studies are ongoing. The need for a booster dose is still unknown, but a study showed that, if necessary, a booster dose administered to adults aged ≥70 years who received their first dose of zoster vaccine ≥10 years previously was immunogenic. Zoster vaccine had a favourable safety and tolerability profile, with the most commonly reported adverse events being non-severe injection-site reactions. In conclusion, zoster vaccine reduces the incidence of HZ and PHN, thereby reducing the burden of illness associated with HZ; improved uptake of zoster vaccine is needed.

The Effects of Infrared-Blocking Pigments and Deck Venting on Stone-Coated Metal Residential Roofs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, William A

2006-01-01

Field data show that stone-coated metal shakes and S-mission tile, which exploit the use of infraredblocking color pigments (IrBCPs), along with underside venting reduce the heat flow penetrating the conditioned space of a residence by 70% compared with the amount of heat flow penetrating roofs with conventional asphalt shingles. Stone-coated metal roof products are typically placed on battens and counter-battens and nailed through the battens to the roof deck. The design provides venting on the underside of the metal roof that reduces the heat flow penetrating a home. The Metal Construction Association (MCA) and its affiliate members installed stone-coated metalmore » roofs with shake and S-mission tile profiles and a painted metal shake roof on a fully instrumented attic test assembly at Oak Ridge National Laboratory (ORNL). Measurements of roof, deck, attic, and ceiling temperatures; heat flows; solar reflectance; thermal emittance; and ambient weather were recorded for each of the test roofs and also for an adjacent attic cavity covered with a conventional pigmented and direct nailed asphalt shingle roof. All attic assemblies had ridge and soffit venting; the ridge was open to the underside of the stone-coated metal roofs. A control assembly with a conventional asphalt shingle roof was used for comparing deck and ceiling heat transfer rates.« less

Shingles

MedlinePlus

... NINDS supports research on viral proteins and virus defense mechanisms in neurons to understand why the varicella- ... NINDS supports research on viral proteins and virus defense mechanisms in neurons to understand why the varicella- ...

Chickenpox (image)

MedlinePlus

Chickenpox is caused by the varicella-zoster virus, a member of the herpesvirus family. The same virus also causes herpes zoster, shingles, in adults. Chickenpox is extremely contagious, and can be spread by ...

36 CFR 223.277 - Forest botanical products definition.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., transplants, tree sap, and wildflowers. Forest botanical products are not animals, animal parts, Christmas trees, fence material, firewood, insects, mine props, minerals, posts and poles, rails, rocks, shingle...

Postherpetic Neuralgia

MedlinePlus

... burning, sharp and jabbing, or deep and aching. Sensitivity to light touch. People with the condition often ... of shingles. The vaccine is approved by the Food and Drug Administration for adults age 50 and ...

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

The first Challenge Home built in New England features cool-roof shingles, HERS 20–42, and walls densely packed with blown fiberglass. This house won a 2013 Housing Innovation Award in the custom builder category.

Development status on a TPV cylinder for combined heat and electric power for the home

NASA Astrophysics Data System (ADS)

Fraas, Lewis; Samaras, John; Huang, Han-Xiang; Seal, Michael; West, Edward

1999-03-01

Several first-generation water-cooled TPV cylinders have been built and tested. The existing units contain 380 GaSb cells mounted on 20 circuits; the design and test results on these photovoltaic converter arrays are presented here. Tested with a 1600 °C glowbar, one of these cylinders generated 990 Watts from a cell active area of 396 cm2, which is an electric power density of 2.5 Watts per cm2. A second-generation design is presented, using a new shingled circuit assembly. These shingled circuits allow for a slightly larger cylinder design with nearly double the cell active area. Using a SiC emitter operating at 1425 °C, this second-generation cylinder should produce over 1.5 kW of power with improved efficiency.

SRB/SLEEC (Solid Rocket Booster/Shingle Lap Extendible Exit Cone) feasibility study, volume 1

NASA Technical Reports Server (NTRS)

Baker, William H., Jr.

1986-01-01

A preliminary design and analysis was completed for a SLEEC (Shingle Lap Extendible Exit Cone) which could be incorporated on the Space Transportation System (STS) Solid Rocket Booster (SRB). Studies were completed which predicted weights and performance increases and development plans were prepared for the full-scale bench and static test of SLEEC. In conjunction with the design studies, a series of supporting analyses were performed to assure the validity and feasibility of performance, fabrication, cost, and reliability for the selected design. The feasibility and required amounts of bench, static firing, and flight tests considered necessary for the successful incorporation of SLEEC on the Shuttle SRBs were determined. Preliminary plans were completed which define both a follow on study effort and a development program.

HIV Antibody Test

MedlinePlus

... Free Fetal DNA Cerebrospinal Fluid (CSF) Analysis Ceruloplasmin Chemistry Panels Chickenpox and Shingles Tests Chlamydia Testing Chloride ... D. R., Editors (2006). Contemporary Practice in Clinical Chemistry, AACC Press, Washington, DC. Pp. 487-490. Bennett, ...

Lipase Test

MedlinePlus

... Free Fetal DNA Cerebrospinal Fluid (CSF) Analysis Ceruloplasmin Chemistry Panels Chickenpox and Shingles Tests Chlamydia Testing Chloride ... D. R., Editors (© 2006). Contemporary Practice in Clinical Chemistry: AACC Press, Washington, DC. Pp 281-287. Wu, ...

CK-MB Test

MedlinePlus

... Free Fetal DNA Cerebrospinal Fluid (CSF) Analysis Ceruloplasmin Chemistry Panels Chickenpox and Shingles Tests Chlamydia Testing Chloride ... Missouri. Pp. 312-315. Tietz Textbook of Clinical Chemistry and Molecular Diagnostics. Burtis CA, Ashwood ER and ...

Abdominal Pain Syndrome

MedlinePlus

... blood clots to the lungs) Abdominal or chest wall pain: Shingles (herpes zoster infection) Costochondritis (inflammation of ... or tumors), fat (evidence of impaired digestion and absorption of food), and the presence of germs. X- ...

Chickenpox

MedlinePlus

Varicella; Chicken pox ... Chickenpox is caused by the varicella-zoster virus. It is a member of the herpesvirus family. The same virus also causes shingles in adults. Chickenpox can be spread very easily to others from ...

iPAS: AES Flight System Technology Maturation for Human Spaceflight

NASA Technical Reports Server (NTRS)

Othon, William L.

2014-01-01

In order to realize the vision of expanding human presence in space, NASA will develop new technologies that can enable future crewed spacecraft to go far beyond Earth orbit. These technologies must be matured to the point that future project managers can accept the risk of incorporating them safely and effectively within integrated spacecraft systems, to satisfy very challenging mission requirements. The technologies must also be applied and managed within an operational context that includes both on-board crew and mission support on Earth. The Advanced Exploration Systems (AES) Program is one part of the NASA strategy to identify and develop key capabilities for human spaceflight, and mature them for future use. To support this initiative, the Integrated Power Avionics and Software (iPAS) environment has been developed that allows engineers, crew, and flight operators to mature promising technologies into applicable capabilities, and to assess the value of these capabilities within a space mission context. This paper describes the development of the integration environment to support technology maturation and risk reduction, and offers examples of technology and mission demonstrations executed to date.

Why commercialization of gene therapy stalled; examining the life cycles of gene therapy technologies.

PubMed

Ledley, F D; McNamee, L M; Uzdil, V; Morgan, I W

2014-02-01

This report examines the commercialization of gene therapy in the context of innovation theories that posit a relationship between the maturation of a technology through its life cycle and prospects for successful product development. We show that the field of gene therapy has matured steadily since the 1980s, with the congruent accumulation of >35 000 papers, >16 000 US patents, >1800 clinical trials and >$4.3 billion in capital investment in gene therapy companies. Gene therapy technologies comprise a series of dissimilar approaches for gene delivery, each of which has introduced a distinct product architecture. Using bibliometric methods, we quantify the maturation of each technology through a characteristic life cycle S-curve, from a Nascent stage, through a Growing stage of exponential advance, toward an Established stage and projected limit. Capital investment in gene therapy is shown to have occurred predominantly in Nascent stage technologies and to be negatively correlated with maturity. Gene therapy technologies are now achieving the level of maturity that innovation research and biotechnology experience suggest may be requisite for efficient product development. Asynchrony between the maturation of gene therapy technologies and capital investment in development-focused business models may have stalled the commercialization of gene therapy.

Chest Pain

MedlinePlus

... causes Chest pain can also be caused by: Panic attack. If you have periods of intense fear accompanied ... fear of dying, you may be experiencing a panic attack. Shingles. Caused by a reactivation of the chickenpox ...

Blood Urea Nitrogen Test

MedlinePlus

... Free Fetal DNA Cerebrospinal Fluid (CSF) Analysis Ceruloplasmin Chemistry Panels Chickenpox and Shingles Tests Chlamydia Testing Chloride ... mmol/L 1 from Tietz Textbook of Clinical Chemistry and Molecular Diagnostics. Burtis CA, Ashwood ER, Bruns ...

First Aid: Rashes

MedlinePlus

... for: Parents Kids Teens First Aid: Skin Infections Poison Ivy Erythema Multiforme Hives (Urticaria) Erythema Toxicum Eczema Pityriasis ... Fifth Disease Shingles Diaper Rash Word Find: Skin Poison Ivy Rashes: The Itchy Truth Your Skin Impetigo Ringworm ...

Shingles - aftercare

MedlinePlus

Herpes zoster - treatment ... Mays RM, Petersen ET, Gordon RA, Tyring SK. Herpes zoster. In: Lebwohl MG, Heymann WR, Berth-Jones ... Saunders; 2014:chap 101. Whitley RJ. Chickenpox and herpes zoster (varicella-zoster virus). In: Bennett JE, Dolin ...

Shingles (Herpes Zoster)

MedlinePlus

... Us Media contacts Advertising contacts AAD logo Advertising, marketing and sponsorships Legal notice Copyright © 2018 American Academy ... prohibited without prior written permission. AAD logo Advertising, marketing and sponsorships Legal notice Copyright © 2017 American Academy ...

Shingles

MedlinePlus

... Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family Life First Aid & Safety Doctors & Hospitals Videos Recipes for Kids Kids site Sitio para niños How the Body Works Puberty & Growing Up Staying Healthy Staying Safe Recipes & ...

Patterns of Innovation in Alzheimer's Disease Drug Development: A Strategic Assessment Based on Technological Maturity.

PubMed

Beierlein, Jennifer M; McNamee, Laura M; Walsh, Michael J; Ledley, Fred D

2015-08-01

This article examines the current status of translational science for Alzheimer's disease (AD) drug discovery by using an analytical model of technology maturation. Previous studies using this model have demonstrated that nascent scientific insights and inventions generate few successful leads or new products until achieving a requisite level of maturity. This article assessed whether recent failures and successes in AD research follow patterns of innovation observed in other sectors. The bibliometric-based Technology Innovation Maturation Evaluation model was used to quantify the characteristic S-curve of growth for AD-related technologies, including acetylcholinesterase, N-methyl-d-aspartate (NMDA) receptors, B-amyloid, amyloid precursor protein, presenilin, amyloid precursor protein secretases, apolipoprotein E4, and transactive response DNA binding protein 43 kDa (TDP-43). This model quantifies the accumulation of knowledge as a metric for technological maturity, and it identifies the point of initiation of an exponential growth stage and the point at which growth slows as the technology is established. In contrast to the long-established acetylcholinesterase and NMDA receptor technologies, we found that amyloid-related technologies reached the established point only after 2000, and that the more recent technologies (eg, TDP-43) have not yet approached this point. The first approvals for new molecular entities targeting acetylcholinesterase and the NMDA receptor occurred an average of 22 years after the respective technologies were established, with only memantine (which was phenotypically discovered) entering clinical trials before this point. In contrast, the 6 lead compounds targeting the formation of amyloid plaques that failed in Phase III trials between 2009 and 2014 all entered clinical trials before the respective target technologies were established. This analysis suggests that AD drug discovery has followed a predictable pattern of innovation in which technological maturity is an important determinant of success in development. Quantitative analysis indicates that the lag in emergence of new products, and the much-heralded clinical failures of recent years, should be viewed in the context of the ongoing maturation of AD-related technologies. Although these technologies were not sufficiently mature to generate successful products a decade ago, they may be now. Analytical models of translational science can inform basic and clinical research results as well as strategic development of new therapeutic products. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Shingles (For Parents)

MedlinePlus

... Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family Life First Aid & Safety Doctors & Hospitals Videos Recipes for Kids Kids site Sitio para niños How the Body Works Puberty & Growing Up Staying Healthy Staying Safe Recipes & ...

Durable Recycled Superpave Mixes in Kansas

DOT National Transportation Integrated Search

2018-04-01

The use of economical and environment-friendly recycled asphalt materials has become increasingly popular for asphalt pavement construction. In general, reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) are used in hot-mix asphalt ...

Recombinant Zoster (Shingles) Vaccine (RZV)

MedlinePlus

... the site of the injection Headache, muscle aches, fever, shivering, fatigue In clinical trials, most people got a ... people felt tired, had muscle pain, a headache, shivering, fever, stomach pain, or nausea. About 1 out of ...

Anti-Seizure Medications: Relief from Nerve Pain

MedlinePlus

... be debilitating and difficult to control. Nerve damage (neuropathy) can be caused by many conditions, including: Diabetes. ... and pain in your hands and feet (diabetic neuropathy). Shingles. Anyone who has had chickenpox is at ...

Development and testing of shingle-type solar cell modules. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shepard, N.F.

1979-02-28

The design, development, fabrication and testing of a shingle-type terrestrial solar cell module which produces 98 watts/m/sup 2/ of exposed module area at 1 kW/m/sup 2/ insolation and 61/sup 0/C are reported. These modules make it possible to easily incorporate photovoltaic power generation into the sloping roofs of residential or commercial buildings by simply nailing the modules to the plywood roof sheathing. This design consists of nineteen series-connected 53 mm diameter solar cells arranged in a closely packaged hexagon configuration. These cells are individually bonded to the embossed surface of a 3 mm thick thermally tempered hexagon-shaped piece of ASGmore » SUNADEX glass. Monsanto SAFLEX polyvinyl butyral is used as the laminating adhesive. RTVII functions as the encapsulant between the underside of the glass superstrate and a rear protective sheet of 0.8 mm thick TEXTOLITE. The semi-flexible portion of each shingle module is a composite laminate construction consisting of outer layers of B.F. Goodrich FLEXSEAL and an epichlorohydrin closed cell foam core. The module design has satisfactorily survived the JPL-defined qualification testing program which includes 50 thermal cycles between -40 and +90/sup 0/C, a seven-day temperature-humidity exposure test and a mechanical integrity test consisting of a bidirectional cyclic loading at 2390 Pa (50 lb/ft/sup 2/) which is intended to simulate loads due to a 45 m/s (100 mph) wind.« less

Advanced composite combustor structural concepts program

NASA Technical Reports Server (NTRS)

Sattar, M. A.; Lohmann, R. P.

1984-01-01

An analytical study was conducted to assess the feasibility of and benefits derived from the use of high temperature composite materials in aircraft turbine engine combustor liners. The study included a survey and screening of the properties of three candidate composite materials including tungsten reinforced superalloys, carbon-carbon and silicon carbide (SiC) fibers reinforcing a ceramic matrix of lithium aluminosilicate (LAS). The SiC-LAS material was selected as offering the greatest near term potential primarily on the basis of high temperature capability. A limited experimental investigation was conducted to quantify some of the more critical mechanical properties of the SiC-LAS composite having a multidirection 0/45/-45/90 deg fiber orientation favored for the combustor linear application. Rigorous cyclic thermal tests demonstrated that SiC-LAS was extremely resistant to the thermal fatigue mechanisms that usually limit the life of metallic combustor liners. A thermal design study led to the definition of a composite liner concept that incorporated film cooled SiC-LAS shingles mounted on a Hastelloy X shell. With coolant fluxes consistent with the most advanced metallic liner technology, the calculated hot surface temperatures of the shingles were within the apparent near term capability of the material. Structural analyses indicated that the stresses in the composite panels were low, primarily because of the low coefficient of expansion of the material and it was concluded that the dominant failure mode of the liner would be an as yet unidentified deterioration of the composite from prolonged exposure to high temperature. An economic study, based on a medium thrust size commercial aircraft engine, indicated that the SiC-LAS combustor liner would weigh 22.8N (11.27 lb) less and cost less to manufacture than advanced metallic liner concepts intended for use in the late 1980's.

Cryogenic Propellant Storage and Transfer (CPST) Technology Maturation: Establishing a Foundation for a Technology Demonstration Mission (TDM)

NASA Technical Reports Server (NTRS)

Doherty, Michael P.; Meyer, Michael L.; Motil, Susan M.; Ginty, Carol A.

2014-01-01

As part of U.S. National Space Policy, NASA is seeking an innovative path for human space exploration, which strengthens the capability to extend human and robotic presence throughout the solar system. NASA is laying the groundwork to enable humans to safely reach multiple potential destinations, including asteroids, Lagrange points, the Moon and Mars. In support of this, NASA is embarking on the Technology Demonstration Mission Cryogenic Propellant Storage and Transfer (TDM CPST) Project to test and validate key cryogenic capabilities and technologies required for future exploration elements, opening up the architecture for large cryogenic propulsion stages (CPS) and propellant depots. The TDM CPST project will provide an on-orbit demonstration of the capability to store, transfer, and measure cryogenic propellants for a duration which is relevant to enable long term human space exploration missions beyond low Earth orbit (LEO). Recognizing that key cryogenic fluid management technologies anticipated for on-orbit (flight) demonstration needed to be matured to a readiness level appropriate for infusion into the design of the flight demonstration, the NASA Headquarters Space Technology Mission Directorate authorized funding for a one-year (FY12) ground based technology maturation program. The strategy, proposed by the CPST Project Manager, focused on maturation through modeling, studies, and ground tests of the storage and fluid transfer Cryogenic Fluid Management (CFM) technology sub-elements and components that were not already at a Technology Readiness Level (TRL) of 5. A technology maturation plan (TMP) was subsequently approved which described: the CFM technologies selected for maturation, the ground testing approach to be used, quantified success criteria of the technologies, hardware and data deliverables, and a deliverable to provide an assessment of the technology readiness after completion of the test, study or modeling activity. This paper will present the testing, studies, and modeling that occurred in FY12 to mature cryogenic fluid management technologies for propellant storage, transfer, and supply, to examine extensibility to full scale, long duration missions, and to develop and validate analytical models. Finally, the paper will briefly describe an upcoming test to demonstrate Liquid Oxygen (LO2) Zero Boil-Off (ZBO).

Cryogenic Propellant Storage and Transfer (CPST) Technology Maturation: Establishing a Foundation for a Technology Demonstration Mission (TDM)

NASA Technical Reports Server (NTRS)

Doherty, Michael P.; Meyer, Michael L.; Motil, Susan M.; Ginty, Carol A.

2013-01-01

As part of U.S. National Space Policy, NASA is seeking an innovative path for human space exploration, which strengthens the capability to extend human and robotic presence throughout the solar system. NASA is laying the groundwork to enable humans to safely reach multiple potential destinations, including asteroids, Lagrange points, the Moon and Mars. In support of this, NASA is embarking on the Technology Demonstration Mission Cryogenic Propellant Storage and Transfer (TDM CPST) Project to test and validate key cryogenic capabilities and technologies required for future exploration elements, opening up the architecture for large cryogenic propulsion stages (CPS) and propellant depots. The TDM CPST project will provide an on-orbit demonstration of the capability to store, transfer, and measure cryogenic propellants for a duration which is relevant to enable long term human space exploration missions beyond low Earth orbit (LEO). Recognizing that key cryogenic fluid management technologies anticipated for on-orbit (flight) demonstration needed to be matured to a readiness level appropriate for infusion into the design of the flight demonstration, the NASA Headquarters Space Technology Mission Directorate authorized funding for a one-year (FY12) ground based technology maturation program. The strategy, proposed by the CPST Project Manager, focused on maturation through modeling, studies, and ground tests of the storage and fluid transfer Cryogenic Fluid Management (CFM) technology sub-elements and components that were not already at a Technology Readiness Level (TRL) of 5. A technology maturation plan (TMP) was subsequently approved which described: the CFM technologies selected for maturation, the ground testing approach to be used, quantified success criteria of the technologies, hardware and data deliverables, and a deliverable to provide an assessment of the technology readiness after completion of the test, study or modeling activity. This paper will present the testing, studies, and modeling that occurred in FY12 to mature cryogenic fluid management technologies for propellant storage, transfer, and supply, to examine extensibility to full scale, long duration missions, and to develop and validate analytical models. Finally, the paper will briefly describe an upcoming test to demonstrate Liquid Oxygen (LO2) Zero Boil- Off (ZBO).

Stimulating Innovation and Accelerating the Development of Complex and Slowly Maturing Technologies Through Advanced Technology Prize Competitions

DTIC Science & Technology

2007-06-15

technology prize competitions have been used since the 18th century to spur innovation and advance the development of complex and slowly maturing disruptive ... technologies The Defense Advanced Research Projects Agency (DARPA) has used advanced technology competitions in 2004 and 2005 to rapidly accelerate the

Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Satellite Communications Terminal, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

View of twofamily house at 520522 Rison Ave., NE, originally ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of two-family house at 520-522 Rison Ave., NE, originally occupied by workers in nearby mills. Note original asbestos shingle roof - 520-522 Rison Avenue, Northeast (House), Huntsville, Madison County, AL

Preliminary investigation of RAP and RAS in HMAC.

DOT National Transportation Integrated Search

2010-02-01

laboratory study was undertaken to investigate how various proportions of reclaimed asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) added to hot mixed asphalt concrete (HMAC) mixtures affect the Superpave performance grade of the blended ...

Tdap Booster Requirements for Secondary Schools

MedlinePlus

... HPV Rubella Influenza Smallpox Measles Tetanus MenACWY Varicella (chickenpox) MenB Zoster (shingles) Mumps View All Pertussis Talking ... TRANSLATE FOR IAC TRAVEL (INTERNATIONAL) UNPROTECTED PEOPLE REPORTS Chickenpox Diphtheria Hepatitis A Hepatitis B >> view all VACCINATING ...

Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Electric Substation, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Looking north Beale Air Force Base, Perimeter Acquisition Vehicle ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking north - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Electric Substation, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

BNP and NT-proBNP Test

MedlinePlus

... Free Fetal DNA Cerebrospinal Fluid (CSF) Analysis Ceruloplasmin Chemistry Panels Chickenpox and Shingles Tests Chlamydia Testing Chloride ... 488-95. William Clarke. Contemporary Practice in Clinical Chemistry, 2nd Edition Paperback – February 4, 2011. ISBN-13: ...

Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Microwave Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Translational Science by Public Biotechnology Companies in the IPO“Class of 2000”: The Impact of Technological Maturity

PubMed Central

McNamee, Laura; Ledley, Fred

2013-01-01

The biotechnology industry plays a central role in the translation of nascent biomedical science into both products that offer material health benefits and creating capital growth. This study examines the relationship between the maturity of technologies in a characteristic life cycle and value creation by biotechnology companies. We examined the core technology, product development pipelines, and capitalization for a cohort of biotechnology companies that completed an IPO in 2000. Each of these companies was well financed and had core technologies on the leading edge of biological science. We found that companies with the least mature technologies had significantly higher valuations at IPO, but failed to develop products based on these technologies over the ensuing decade, and created less capital growth than companies with more mature technologies at IPO. The observation that this cohort of recently public biotechnology companies was not effective in creating value from nascent science suggests the need for new, evidence-based business strategies for translational science. PMID:24358154

Translational science by public biotechnology companies in the IPO "class of 2000": the impact of technological maturity.

PubMed

McNamee, Laura; Ledley, Fred

2013-01-01

The biotechnology industry plays a central role in the translation of nascent biomedical science into both products that offer material health benefits and creating capital growth. This study examines the relationship between the maturity of technologies in a characteristic life cycle and value creation by biotechnology companies. We examined the core technology, product development pipelines, and capitalization for a cohort of biotechnology companies that completed an IPO in 2000. Each of these companies was well financed and had core technologies on the leading edge of biological science. We found that companies with the least mature technologies had significantly higher valuations at IPO, but failed to develop products based on these technologies over the ensuing decade, and created less capital growth than companies with more mature technologies at IPO. The observation that this cohort of recently public biotechnology companies was not effective in creating value from nascent science suggests the need for new, evidence-based business strategies for translational science.

Shingles vaccine - what you need to know

MedlinePlus

... varicella zoster virus, the same virus that causes chickenpox. After you have chickenpox, the virus stays in your body and can ... person. However, a person who has never had chickenpox (or chickenpox vaccine) could get chickenpox from someone ...

Shingles - Multiple Languages

MedlinePlus

... Haitian Creole (Kreyol ayisyen) Hmong (Hmoob) Indonesian (Bahasa Indonesia) Japanese (日本語) Khmer (ភាសាខ្មែរ) Korean ( ... Centers for Disease Control and Prevention Indonesian (Bahasa Indonesia) Expand Section Vaccine Information Statement (VIS) -- Live Zoster ( ...

Best practice for using RAS in HMA.

DOT National Transportation Integrated Search

2012-04-01

The use of recycled asphalt shingles (RAS) in hot-mix asphalt (HMA) mixtures has the potential to : significantly reduce the cost of asphalt paving mixes while conserving energy and preserving the : environment. This report documents the best practic...

High RAP mixes design methodology with balanced performance.

DOT National Transportation Integrated Search

2011-11-01

"The use of reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) can significantly reduce the increasing cost of hot-mix asphalt paving, conserve energy, and protect the environment. This report presents a comprehensive study focusing...

The Temperature of Various Surfaces Exposed to Solar Radiation: An Experiment.

ERIC Educational Resources Information Center

Russell, Dena G.; Bartels, Richard A.

1989-01-01

Examines the effect of solar radiation on colored shingles. Describes the experimental procedure, results, and discussion. Presents a picture of the experimental arrangement and three graphs of data measured at different dates. (YP)

29 CFR 570.67 - Occupations in roofing operations and on or about a roof (Order 16).

Code of Federal Regulations, 2011 CFR

2011-07-01

... pitch, asphalt prepared paper, tile, composite roofing materials, slate, metal, translucent materials, and shingles of asbestos, asphalt, wood or other materials) to roofs of buildings or other structures...

29 CFR 570.67 - Occupations in roofing operations and on or about a roof (Order 16).

Code of Federal Regulations, 2013 CFR

2013-07-01

... pitch, asphalt prepared paper, tile, composite roofing materials, slate, metal, translucent materials, and shingles of asbestos, asphalt, wood or other materials) to roofs of buildings or other structures...

29 CFR 570.67 - Occupations in roofing operations and on or about a roof (Order 16).

Code of Federal Regulations, 2012 CFR

2012-07-01

... pitch, asphalt prepared paper, tile, composite roofing materials, slate, metal, translucent materials, and shingles of asbestos, asphalt, wood or other materials) to roofs of buildings or other structures...

Beale Air Force Base, Perimeter Acquisition Vehicle Entry PhasedArray Warning ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Civil Engineering Storage Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Software offers transparent, straightforward assessment of pavement additives : research spotlight.

DOT National Transportation Integrated Search

2015-04-01

Adding new materials to pavement layers is a proven technique to : improve performance. Many types of additivesfrom engineered : polymers and acids to recycled pavement, crumb rubber, shingles : and glasshave been used to help construct better ...

Interior, looking northeast Beale Air Force Base, Perimeter Acquisition ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Interior, looking northeast - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Microwave Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Efficacy of live zoster vaccine in preventing zoster and postherpetic neuralgia

PubMed Central

Gilden, D.

2011-01-01

Declining cell-mediated immunity to varicella zoster virus (VZV) in elderly individuals results in virus reactivation manifest by zoster (shingles) and postherpetic neuralgia (PHN). To prevent virus reactivation, a new VZV vaccine (Zostavax, Merck) that boosts cell-mediated immunity to VZV was developed. The 3-year Shingles Prevention Study showed that Zostavax significantly reduced burden of disease due to zoster and PHN. Despite its cost-effectiveness for adults ages 65 to 75 years, as determined in the US, Canada and UK, less than 2% of immunocompetent adults over age 60 years in the US were immunized in 2007. This was due to a combination of lack of patient awareness of the vaccine, physicians’ uncertainty about the duration of protection, and different cost-sharing plans for immunization. Nevertheless, zoster vaccine is safe, effective, and highly recommended for immunization of immunocompetent individuals over age 60 years with no history of recent zoster. PMID:21294791

PV module mounting method and mounting assembly

DOEpatents

Lenox, Carl J.S.; Johnson, Kurt M.

2013-04-23

A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

The Equivalent Thermal Resistance of Tile Roofs with and without Batten Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, William A

Clay and concrete tile roofs were installed on a fully instrumented attic test facility operating in East Tennessee s climate. Roof, attic and deck temperatures and heat flows were recorded for each of the tile roofs and also on an adjacent attic cavity covered with a conventionally pigmented and direct-nailed asphalt shingle roof. The data were used to benchmark a computer tool for simulation of roofs and attics and the tool used to develop an approach for computing an equivalent seasonal R-value for sub-tile venting. The approach computed equal heat fluxes through the ceilings of roofs having different combinations ofmore » surface radiation properties and or building constructions. A direct nailed shingle roof served as a control for estimating the equivalent thermal resistance of the air space. Simulations were benchmarked to data in the ASHRAE Fundamentals for the thermal resistance of inclined and closed air spaces.« less

Suppression of ITI by array head reading and 2D-equalization

NASA Astrophysics Data System (ADS)

Nakamura, Y.; Suzuto, R.; Osawa, H.; Okamoto, Y.; Kanai, Y.; Muraoka, H.

2017-05-01

Two-dimensional magnetic recording (TDMR) by shingled magnetic recording (SMR) draws attention as a next generation technology to increase the recording density in hard disk drive (HDD). It is shown that the two-dimensional finite impulse response (2D-FIR) filter provides gain the reproducing waveforms from an array head with 3 readers in the TDMR under a specification of 4 Tbit/inch.2 We evaluate the effect of the intertrack interference (ITI) reduction by 2D-FIR using the correlation between the real FIR filter output and the partial response class-I (PR1) signal corresponding to recording sequence by the computer simulation. The results show that the 2D-FIR filter is effective to mitigate ITI and improves the signal-to-noise ratio at the discriminate point by about 0.6 dB.

Modelling phenolic and technological maturities of grapes by means of the multivariate relation between organoleptic and physicochemical properties.

PubMed

Meléndez, E; Ortiz, M C; Sarabia, L A; Íñiguez, M; Puras, P

2013-01-25

The ripeness of grapes at the harvest time is one of the most important parameters for obtaining high quality red wines. Traditionally the decision of harvesting is to be taken only after analysing sugar concentration, titratable acidity and pH of the grape juice (technological maturity). However, these parameters only provide information about the pulp ripeness and overlook the real degree of skins and seeds maturities (phenolic maturity). Both maturities, technological and phenolic, are not simultaneously reached, on the contrary they tend to separate depending on several factors: grape variety, cultivar, adverse weather conditions, soil, water availability and cultural practices. Besides, this divergence is increasing as a consequence of the climate change (larger quantities of CO(2), less rain, and higher temperatures). 247 samples collected in vineyards representative of the qualified designation of origin Rioja from 2007 to 2011 have been analysed. Samples contain the four grape varieties usual in the elaboration of Rioja wines ('tempranillo', 'garnacha', 'mazuelo' and 'graciano'). The present study is the first systematic investigation on the maturity of grapes that includes the organoleptic evaluation of the degree of grapes maturity (sugars/acidity maturity, aromatic maturity of the pulp, aromatic maturity of the skins and tannins maturity) together with the values of the physicochemical parameters (probable alcohol degree, total acidity, pH, malic acid, K, total index polyphenolics, anthocyans, absorbances at 420, 520 and 620 nm, colour index and tartaric acid) determined over the same samples. A varimax rotation of the latent variables of a PLS model between the physicochemical variables and the mean of four sensory variables allows identifying both maturities. Besides, the position of the samples in the first plane defines the effect that the different factors exert on both phenolic and technological maturities. Copyright © 2012 Elsevier B.V. All rights reserved.

A Study of the Factors Associated with Successful Technology Transfer and their Applicability to Air Force Technology Transfers.

DTIC Science & Technology

1995-09-01

transfer project. (D) 8a Organization has a technology transfer organization. (D,A) 10a Marketing and advertising of technologies targeted to relevant...Entrepreneurial (D) Developer: 10A: Marketing and advertising of technologies targeted to relevant industries. Most developers indicate that they marketed...regard to marketing and advertising . 10B: Technology maturation supported by internal units or by contracting out. Technology maturation is the

QuEST: Qualifying Environmentally Sustainable Technologies. Volume 2

NASA Technical Reports Server (NTRS)

Brown, Christina (Editor)

2007-01-01

TEERM focuses its validation efforts on technologies that have shown promise in laboratory testing, but lack testing under realistic or field environment. Mature technologies have advantages over those that are still in the developmental stage such as being more likely to be transitioned into a working environment. One way TEERM begins to evaluate the suitability of technologies is through Technology Readiness Levels (TRLs). TRLs are a systematic metric/measurement system that supports assessments of the maturity of a particular technology and the consistent comparison of maturity between different types of technology. TEERM generally works on demonstrating/validating alternatives that fall within TRLs 5-9. In instances where a mature technology does not exist for a particular Agency application, TEERM works with technology development groups and programs such as NASA's Innovative Partnerships Program (IPP). The IPP's purpose is to identify and document available technologies in light of NASA's needs, evaluate and prioritize those technologies, and reach out to find new partners. All TEERM projects involve multiple partners. Partnering reduces duplication of effort that otherwise might occur if individuals worked their problems alone. Partnering also helps reduce individual contributors' shares of the total cost of technology validation. Through collaboration and financial commitment from project stakeholders and third-party sources, it is possible to fully fund expensive demonstration/validation efforts.

What Everyone Should Know about Zostavax

MedlinePlus

... vaccine. Contact your insurer to find out. Private health insurance Most private health insurance plans cover the vaccine for people 60 years ... shingles vaccine). If you do not currently have health insurance, learn more about affordable health coverage options . To ...

Pharmaceutical Approval Update.

PubMed

Kaufman, Michele B

2018-03-01

Zoster vaccine recombinant, adjuvanted (Shingrix) for the prevention of shingles in adults; angiotensin II injection (Giapreza) to increase blood pressure in adults with septic or other distributive shock; and glycopyrrolate inhalation solution (Lonhala Magnair) for the maintenance treatment of chronic obstructive pulmonary disease.

SECOND FLOOR, VIEW OF THE NORTH PLAIN OF THE 1772 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SECOND FLOOR, VIEW OF THE NORTH PLAIN OF THE 1772 ROOF TO SHOW ROUND-BUTT WOOD SHINGLES; THIS ROOF IS PROTECTED BY THE 1784 SHED ADDITION - Murray-Dick-Fawcett House, 517 Prince Street, Alexandria, Independent City, VA

2. VIEW OF BLOCK AND TACKLE FOR MOVING CEDAR LOGS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW OF BLOCK AND TACKLE FOR MOVING CEDAR LOGS FROM POND TO JACK LADDER--AN ENDLESS CHAIN CONVEYOR THAT MOVES LOGS INTO MILL - Lester Shingle Mill, 1602 North Eighteenth Street, Sweet Home, Linn County, OR

In vitro maturation of human oocytes for assisted reproduction.

PubMed

Jurema, Marcus W; Nogueira, Daniela

2006-11-01

To describe and evaluate the current practice of in vitro maturation of oocytes for assisted reproduction. Review of the available and relevant literature regarding in vitro maturation of oocytes. In vitro maturation of human oocytes retrieved from antral ovarian follicles is an emerging procedure quickly being incorporated into the realm of assisted reproductive technologies. This new technology has several potential advantages over traditional controlled ovarian hyperstimulation for IVF, such as reduction of costs by minimizing gonadotropin and GnRH analogue use, elimination of ovarian hyperstimulation syndrome, and simplicity of protocol. In vitro maturation of oocytes for assisted reproduction in human beings still is undergoing refinement but currently is providing efficacy and safety outcome comparable to that of traditional IVF in recent selected studies. Implementing in vitro maturation into an established IVF practice is feasible and requires only a few simple adjustments. Crucial to the advancement and optimization of the technology is a better understanding of how to maximize immature oocyte developmental competence and endometrial receptivity.

35. Photocopy of negative (original in possession of WACC), photographer ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

35. Photocopy of negative (original in possession of WACC), photographer unknown, c.1915 FARAWAY RANCH AS COMPLETED WITH ADOBE BRICK WALLS AND WOOD SHINGLE ROOF - Faraway Ranch, Erickson-Riggs Ranch House, State Highway 181, Willcox, Cochise County, AZ

1. Historic American Buildings Survey (Fed.) Stanely P. Mixon, Photographer ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Historic American Buildings Survey (Fed.) Stanely P. Mixon, Photographer Mar. 27, 1940 (A) EXTERIOR, GENERAL VIEW FROM STREET BELOW) (JUST MADE INTO TENEMENTS & EXTERIOR COVERED WITH ASBESTOS SHINGLES) - Jonathan Latimer House, New London, New London County, CT

Preliminary investigation of RAP and RAS in HMAC : final report, February 2010.

DOT National Transportation Integrated Search

2010-02-01

A laboratory study was undertaken to investigate how various proportions of reclaimed asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) added to hot mixed asphalt concrete (HMAC) mixtures affect the Superpave performance grade of the blende...

29 CFR 570.67 - Occupations in roofing operations and on or about a roof (Order 16).

Code of Federal Regulations, 2010 CFR

2010-07-01

..., including painting and coating of existing roofs; the construction of the sheathing or base of roofs (wood..., and shingles of asbestos, asphalt, wood or other materials) to roofs of buildings or other structures...

What Everyone Should Know about Shingles Vaccine (Shingrix)

MedlinePlus

... vaccine. Contact your insurer to find out. Private health insurance Many private health insurance plans will cover the vaccine, but there may ... about Shingrix. If you do not currently have health insurance, learn more about affordable health coverage options . To ...

Guidelines on design and construction of high performance thin HMA overlays.

DOT National Transportation Integrated Search

2016-08-01

Key Components of Mix Design and Material Properties: : High-quality aggregate - SAC A for high : volume roads : - PG 70 or 76 (Polymer Modified binders) : - RAP and RAS (shingles) not allowed : - Minimum binder content ( Over 6%) : - Pay for binder ...

75 FR 63840 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-18

..., shingles, CMV disease, mononucleosis, and Kaposi's sarcoma. Applications: Prevention or treatment of..., cytomegalovirus, varicella zoster, and Kaposi's sarcoma- associated herpesvirus). Advantage: Inhibition of histone... repression of viral genomes and the requirement to de-repress these genomes for productive infection appears...

Fundamental evaluation of the interaction between RAS/RAP and virgin asphalt binders.

DOT National Transportation Integrated Search

2017-08-01

A comprehensive laboratory testing program was conducted in this research project to examine the blending between reclaimed asphalt pavement (RAP)/recycled asphalt shingles (RAS) and virgin asphalt binders and to evaluate the factors that may affect ...

Environmentally Responsible Aviation (ERA) Project - N+2 Advanced Vehicle Concepts Study and Conceptual Design of Subscale Test Vehicle (STV) Final Report

NASA Technical Reports Server (NTRS)

Bonet, John T.; Schellenger, Harvey G.; Rawdon, Blaine K.; Elmer, Kevin R.; Wakayama, Sean R.; Brown, Derrell L.; Guo, Yueping

2011-01-01

NASA has set demanding goals for technology developments to meet national needs to improve fuel efficiency concurrent with improving the environment to enable air transportation growth. A figure shows NASA's subsonic transport system metrics. The results of Boeing ERA N+2 Advanced Vehicle Concept Study show that the Blended Wing Body (BWB) vehicle, with ultra high bypass propulsion systems have the potential to meet the combined NASA ERA N+2 goals. This study had 3 main activities. 1) The development of an advanced vehicle concepts that can meet the NASA system level metrics. 2) Identification of key enabling technologies and the development of technology roadmaps and maturation plans. 3) The development of a subscale test vehicle that can demonstrate and mature the key enabling technologies needed to meet the NASA system level metrics. Technology maturation plans are presented and include key performance parameters and technical performance measures. The plans describe the risks that will be reduced with technology development and the expected progression of technical maturity.

Oblique perspective of portal, due north. Bridge has gable roof ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Oblique perspective of portal, due north. Bridge has gable roof clad with wood shingles and has board and batten siding. - Watson Mill Bridge, Spanning South Fork Broad River, Watson Mill Road, Watson Mill Bridge State Park, Comer, Madison County, GA

Literature review : performance of RAP/RAS mixes and new direction.

DOT National Transportation Integrated Search

2014-04-01

In the last several years reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) have been : widely used in asphalt mixes in Texas. The use of RAP/RAS can significantly reduce the initial cost of : asphalt mixtures, conserve energy, and...

18. VIEW OF BALES OF CEDAR TOW (CEDAR SHAVING WITH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. VIEW OF BALES OF CEDAR TOW (CEDAR SHAVING WITH SAWDUST TUMBLED OUT) SOLD FOR GARDEN AND ANIMAL BEDDING, AND OTHER AGRICULTURAL USES; TUMBLER IS CYLINDRICAL MACHINE TO LEFT - Lester Shingle Mill, 1602 North Eighteenth Street, Sweet Home, Linn County, OR

Computer Maintenance Operations Center (CMOC), additional computer support equipment ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Computer Maintenance Operations Center (CMOC), additional computer support equipment - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Testing protocols to ensure performance of high asphalt binder replacement mixes using RAP and RAS.

DOT National Transportation Integrated Search

2015-12-01

The use of reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) in asphalt concrete (AC) mixtures can reduce demand for virgin aggregates and asphalt binder, bringing environmental and economic benefits. However, replacing virgin asph...

Validation of RAP and/or RAS in hydraulic cement concrete : project summary.

DOT National Transportation Integrated Search

2017-01-31

Reclaimed or recycled asphalt pavement (RAP) : and recycled asphalt shingles (RAS) have been : widely used in hot-mix asphalt (HMA) in Texas. : However, a high volume of RAP is still available : in stockpiles along the Texas Department of : Transport...

Shingle 2.0: generalising self-consistent and automated domain discretisation for multi-scale geophysical models

NASA Astrophysics Data System (ADS)

Candy, Adam S.; Pietrzak, Julie D.

2018-01-01

The approaches taken to describe and develop spatial discretisations of the domains required for geophysical simulation models are commonly ad hoc, model- or application-specific, and under-documented. This is particularly acute for simulation models that are flexible in their use of multi-scale, anisotropic, fully unstructured meshes where a relatively large number of heterogeneous parameters are required to constrain their full description. As a consequence, it can be difficult to reproduce simulations, to ensure a provenance in model data handling and initialisation, and a challenge to conduct model intercomparisons rigorously. This paper takes a novel approach to spatial discretisation, considering it much like a numerical simulation model problem of its own. It introduces a generalised, extensible, self-documenting approach to carefully describe, and necessarily fully, the constraints over the heterogeneous parameter space that determine how a domain is spatially discretised. This additionally provides a method to accurately record these constraints, using high-level natural language based abstractions that enable full accounts of provenance, sharing, and distribution. Together with this description, a generalised consistent approach to unstructured mesh generation for geophysical models is developed that is automated, robust and repeatable, quick-to-draft, rigorously verified, and consistent with the source data throughout. This interprets the description above to execute a self-consistent spatial discretisation process, which is automatically validated to expected discrete characteristics and metrics. Library code, verification tests, and examples available in the repository at https://github.com/shingleproject/Shingle. Further details of the project presented at http://shingleproject.org.

3D architecture modeling of reservoir compartments in a Shingled Turbidite Reservoir using high-resolution seismic data and sparse well control, example from Mars {open_quotes}Pink{close_quotes} reservoir, Mississippi Canyon Area, Gulf of Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapin, M.A.; Mahaffie, M.J.; Tiller, G.M.

1996-12-31

Economics of most deep-water development projects require large reservoir volumes to be drained with relatively few wells. The presence of reservoir compartments must therefore be detected and planned for in a pre-development stage. We have used 3-D seismic data to constrain large-scale, deterministic reservoir bodies in a 3-D architecture model of Pliocene-turbidite sands of the {open_quotes}E{close_quotes} or {open_quotes}Pink{close_quotes} reservoir, Prospect Mars, Mississippi Canyon Areas 763 and 807, Gulf of Mexico. Reservoir compartmentalization is influenced by stratigraphic shingling, which in turn is caused by low accommodation space predentin the upper portion of a ponded seismic sequence within a salt withdrawal mini-basin.more » The accumulation is limited by updip onlap onto a condensed section marl, and by lateral truncation by a large scale submarine erosion surface. Compartments were suggested by RFT pressure variations and by geochemical analysis of RFT fluid samples. A geological interpretation derived from high-resolution 3-D seismic and three wells was linked to 3-D architecture models through seismic inversion, resulting in a reservoir all available data. Distinguishing subtle stratigraphical shingles from faults was accomplished by detailed, loop-level mapping, and was important to characterize the different types of reservoir compartments. Seismic inversion was used to detune the seismic amplitude, adjust sandbody thickness, and update the rock properties. Recent development wells confirm the architectural style identified. This modeling project illustrates how high-quality seismic data and architecture models can be combined in a pre-development phase of a prospect, in order to optimize well placement.« less

3D architecture modeling of reservoir compartments in a Shingled Turbidite Reservoir using high-resolution seismic data and sparse well control, example from Mars [open quotes]Pink[close quotes] reservoir, Mississippi Canyon Area, Gulf of Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapin, M.A.; Mahaffie, M.J.; Tiller, G.M.

1996-01-01

Economics of most deep-water development projects require large reservoir volumes to be drained with relatively few wells. The presence of reservoir compartments must therefore be detected and planned for in a pre-development stage. We have used 3-D seismic data to constrain large-scale, deterministic reservoir bodies in a 3-D architecture model of Pliocene-turbidite sands of the [open quotes]E[close quotes] or [open quotes]Pink[close quotes] reservoir, Prospect Mars, Mississippi Canyon Areas 763 and 807, Gulf of Mexico. Reservoir compartmentalization is influenced by stratigraphic shingling, which in turn is caused by low accommodation space predentin the upper portion of a ponded seismic sequence withinmore » a salt withdrawal mini-basin. The accumulation is limited by updip onlap onto a condensed section marl, and by lateral truncation by a large scale submarine erosion surface. Compartments were suggested by RFT pressure variations and by geochemical analysis of RFT fluid samples. A geological interpretation derived from high-resolution 3-D seismic and three wells was linked to 3-D architecture models through seismic inversion, resulting in a reservoir all available data. Distinguishing subtle stratigraphical shingles from faults was accomplished by detailed, loop-level mapping, and was important to characterize the different types of reservoir compartments. Seismic inversion was used to detune the seismic amplitude, adjust sandbody thickness, and update the rock properties. Recent development wells confirm the architectural style identified. This modeling project illustrates how high-quality seismic data and architecture models can be combined in a pre-development phase of a prospect, in order to optimize well placement.« less

Maturity Models of Healthcare Information Systems and Technologies: a Literature Review.

PubMed

Carvalho, João Vidal; Rocha, Álvaro; Abreu, António

2016-06-01

The maturity models are instruments to facilitate organizational management, including the management of its information systems function. These instruments are used also in hospitals. The objective of this article is to identify and compare the maturity models for management of information systems and technologies (IST) in healthcare. For each maturity model, it is identified the methodology of development and validation, as well as the scope, stages and their characteristics by dimensions or influence factors. This study resulted in the need to develop a maturity model based on a holistic approach. It will include a comprehensive set of influencing factors to reach all areas and subsystems of health care organizations.

From the Chemistry Lab to Licensing

NASA Technical Reports Server (NTRS)

Savino, Joseph M.; Street, Kenneth W.; Philipp, Warren H.

1998-01-01

This is a story of technology maturation and transfer, and licensing. It traces the history of the recently patented ion- exchange material (IEM) from the accidental discovery that this polymer, a battery separator of marginal performance, picked up copper from distilled water passing through corroded copper tubing in the laboratory, to a point where five organizations and one individual have applied for licenses to manufacture and market it or to use it in a wide variety of applications. This story discusses in detail the problems of converting an immature technology into a mature and eventually commercialized technology, without dedicated resources. Readers will develop an appreciation for how the obstacles to maturation and licensing of the technology were faced and overcome. The lessons learned will be discussed, with the hope of enhancing the technology transfer process.

Modeling the performance properties of RAS and RAP blended asphalt mixes using chemical compositional information.

DOT National Transportation Integrated Search

2017-01-01

Reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) can improve the sustainability of asphalt concrete (AC) due to cost savings and environmental factors, but it is necessary to ensure that pavement performance is not compromised. To...

View of the PAVE PAWS radar from approach along Spencer ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of the PAVE PAWS radar from approach along Spencer Paul Road, looking northwest - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Tuberculosis Control - SD Dept. of Health

Science.gov Websites

Salmonellosis Scabies SARS - Severe Acute Respiratory Syndrome Shigellosis Shingles Silicosis Sinusitis - NIH Communicable Diseases Communicable Disease Links Disease Fact Sheets Acute Pesticide Poisoning AIDS/HIV Algal Hepatitis C Herpes Gladiatorum Herpes II Histoplasmosis Infectious Mononucleosis Influenza Kawasaki Syndrome

View of Face A and Face B Arrays, looking northeast ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of Face A and Face B Arrays, looking northeast - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Use of manufactured waste shingles in a hot-mix asphalt field project.

DOT National Transportation Integrated Search

2008-01-01

The Virginia Department of Transportation (VDOT) is faced with trying to maintain its roads with materials whose cost is increasing at an alarming rate. The significant cost increase for asphalt concrete, which is used to pave a majority of Virginia'...

Computer Maintenance Operations Center (CMOC), showing duplexed cyber 170174 computers ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Computer Maintenance Operations Center (CMOC), showing duplexed cyber 170-174 computers - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Balanced RAP/RAS mix design and performance evaluation system for project-specific service conditions.

DOT National Transportation Integrated Search

2012-11-01

The use of reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) can significantly reduce the increasing cost of hot-mix asphalt paving, conserve energy, and protect the environment. However, the premature cracking problem has been a s...

Varicella zoster virus: chickenpox and shingles.

PubMed

Gould, Dinah

The varicella zoster virus causes two infections: varicella, also known as chickenpox occurring mostly in childhood, and herpes zoster, also known as shingles affecting mainly older people. Varicella usually occurs in children under ten years of age. It is generally a mild infection and in the UK vaccination is not offered as part of the routine immunisation programme. However, adults who develop varicella are at risk of developing complications and the infection is likely to be more severe. Serious complications are a particular risk for pregnant women, unborn children, neonates and those who are immunocompromised. Nurses whose work brings them into contact with those at risk have a vital role in providing information about the importance of avoiding varicella. After the acute infection, the varicella zoster virus gains access to the ganglia in the sensory nervous system where it can remain dormant for years. Reactivation results in herpes zoster, a common and unpleasant illness. A vaccine for herpes zoster was introduced for people aged 70-79 in the UK in September 2013.

SRB/SLEEC (Solid Rocket Booster/Shingle Lap Extendible Exit Cone) feasibility study, volume 2. Appendix A: Design study for a SLEEC actuation system

NASA Technical Reports Server (NTRS)

Thompson, D. S.

1986-01-01

The results are presented of a design feasibility study of a self-contained (powered) actuation system for a Shingle Lap Extendible Exit Cone (SLEEC) for Transportation System (STS). The evolution of the SLEEC actuation system design is reviewed, the final design concept is summarized, and the results of the detailed study of the final concept of the actuation system are treated. A conservative design using proven mechanical components was established as a major program priority. The final mechanical design has a very low development risk since the components, which consist of ballscrews, gearing, flexible shaft drives, and aircraft cables, have extensive aerospace applications and a history of proven reliability. The mathematical model studies have shown that little or no power is required to deploy the SLEEC actuation system because acceleration forces and internal pressure from the rocket plume provide the required energies. A speed control brake is incorporated in the design in order to control the rate of deployment.

The application of photovoltaic roof shingles to residential and commercial buildings

NASA Technical Reports Server (NTRS)

Shepard, N. F., Jr.; Sanchez, L. E.

1978-01-01

The recent development of a shingle-type solar-cell module makes it possible to incorporate easily photovoltaic power generation into the sloping roofs of residential or commercial buildings. These modules, which use a closely packed array of nineteen 53-mm-diameter circular solar cells, are capable of producing 101 watts/sq m of module area under standard operating conditions. This module performance is achievable by the use of solar cells with an average efficiency of 13.3 percent at 1 kW/sq m air-mass-1.5 insolation and at a cell temperature of 28 C. When these modules are mounted on a sloping south-facing roof which is insulated on the rear surface, the annual energy generated at the maximum power operating point will vary from 255.6 to 137.3 kWh/sq m of module area depending on the site location, with Albuquerque, NM, and Seattle, WA, representing the highest and lowest values of the thirteen sites considered.

Design of a photovoltaic system for a passive design northeast all-electric residence

NASA Astrophysics Data System (ADS)

Mehalick, E. M.; Tully, G. F.; Johnson, J.; Parker, J.; Felice, R.

1982-01-01

A photovoltaic system was developed and integrated into a passively designed, low energy consuming home suitable for the Northeast region of the country. The selected array size is 4.1 kW and covers 51 square meters of roof area. The design addresses the residential market segment of low energy consuming houses with limited roof area availability for photovoltaic arrays. A direct mount, next generation, larger sized, photovoltaic shingle module is used to reduce installation costs over earlier generation shingle modules. A 4 kW line-commutated inverter is used in the power conversion subsystem, since it is representative of currently available equipment. The complete system and house design are described, including all the pertinent installation and construction drawings. Specific performance results are presented for the Boston and Madison region. The system design presented, coupled with previously completed designs, provide a set of design options expected to be available to residential homeowners in the mid 1980's.

Efficacy of live zoster vaccine in preventing zoster and postherpetic neuralgia.

PubMed

Gilden, D

2011-05-01

Declining cell-mediated immunity to varicella zoster virus (VZV) in elderly individuals results in virus reactivation manifest by zoster (shingles) and postherpetic neuralgia (PHN). To prevent virus reactivation, a new VZV vaccine (Zostavax; Merck) that boosts cell-mediated immunity to VZV was developed. The 3-year Shingles Prevention Study showed that Zostavax significantly reduced burden of disease because of zoster and PHN. Despite its cost-effectiveness for adults aged 65-75 years, as determined in the United States, Canada and UK, <2% of immunocompetent adults over age 60 years in the United States were immunized in 2007. This was because of a combination of lack of patient awareness of the vaccine, physicians' uncertainty about the duration of protection and different cost-sharing plans for immunization. Nevertheless, zoster vaccine is safe, effective and highly recommended for immunization of immunocompetent individuals over age 60 years with no history of recent zoster. © 2011 The Association for the Publication of the Journal of Internal Medicine.

Selenium in soils of the Lower Wasatch Formation, Campbell County, Wyoming: Geochemistry, distribution, and environmental hazards

NASA Technical Reports Server (NTRS)

Kolm, K. E.

1975-01-01

The author has identified the following significant results. Seleniferous Shingle series soils and sandstone outcrops of section 27, T 48 N, R 71 W, Wyoming are mapped on aerial photography by their association with Astragalus bisulcatus. Chemical leachate analyses and atomic absorption methods reveal all studied Samsil and Shingle soils to contain acid, base, and water soluble selenium compounds, and that water extractions showed varied concentration behavior due to soil pH. Acid-soluble selenium is found to be associated with smectite. Statistical analyses confirm that A. bisulcatus presence has a weak influence on soil-lens organic selenium concentration, and determine the importance of other geobotanical factors for convertor presence. Environmental procedures of high selenium lens burial, convertor plant eradication, and revegetated site monitoring are recommended. Usage of density analysis and photographic enlargement are used to successfully produce both a control area and a Campbell County, Wyoming regional map of A. bisulcatus supportive soils and outcrops using Skylab photography.

Low Gravity Issues of Deep Space Refueling

NASA Technical Reports Server (NTRS)

Chato, David J.

2005-01-01

This paper discusses the technologies required to develop deep space refueling of cryogenic propellants and low cost flight experiments to develop them. Key technologies include long term storage, pressure control, mass gauging, liquid acquisition, and fluid transfer. Prior flight experiments used to mature technologies are discussed. A plan is presented to systematically study the deep space refueling problem and devise low-cost experiments to further mature technologies and prepare for full scale flight demonstrations.

Information Technology Governance Maturity: Examining the Moderating Effect on the Relationship between Strategic Alignment Maturity and Information Technology Effectiveness

ERIC Educational Resources Information Center

Kouakou, Claude N.

2013-01-01

The positive contribution of information technology (IT) in an organization is undeniable. Most organizations take advantage of that contributive benefit by aligning their business strategy with their IT strategy. This alignment is known as IT-business strategic alignment. Strategic alignment involves making the best possible use of corporate IT…

View of McKenzieRichey covered well showing log and lumber construction ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

View of McKenzie-Richey covered well showing log and lumber construction and shingles, facing southeast - McKenzie Property, Covered Well, North Bank of Sailor Gulch, 750 feet northwest of intersection of U.S.F.S. Roads 651 & 349, Placerville, Boise County, ID

Berkeley Bravado: Rochdale Village, University of California, Berkeley

ERIC Educational Resources Information Center

Woodbridge, Sally

1975-01-01

Rochdale Village is a successful example of active student participation in the design and construction of student housing. The apartment complex reflects students' desire for a village of lowrise, wood-shingled buildings, while meeting the University of California's density requirement of 250 units per acre. (JG)

Detail of array panels, Face B, with active and terminated ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Detail of array panels, Face B, with active and terminated dipole elements - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

29 CFR 570.54 - Logging occupations and occupations in the operation of any sawmill, lath mill, shingle mill, or...

Code of Federal Regulations, 2010 CFR

2010-07-01

... convenience of the user, the revised text is set forth as follows: § 570.54 Forest fire fighting and forest... performed, or mining operations. Portable sawmill shall mean a sawmilling operation where no office or...

Looking into Generator Room, showing electromagnetic pulse (EMP) filter boxes ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking into Generator Room, showing electromagnetic pulse (EMP) filter boxes mounted above door - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Power Plant, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Waste tire and shingle scrap/bituminous paving test sections on the Munger Recreational Trail Gateway segment. interim report

DOT National Transportation Integrated Search

1991-02-01

The need to reduce Minnesota's dependence on land fills resulted in a unique cooperative venture by three state agencies. A partnership was forged between the Minnesota Pollution Control Agency (MPCA), the Minnesota Department of Natural Resources (D...

Within compound, looking southeast Power Plant (Building 5761) to left, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, looking southeast Power Plant (Building 5761) to left, Satellite Communications Terminal (Building 5771), center - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

New Developments in the Technology Readiness Assessment Process in US DOE-EM - 13247

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krahn, Steven; Sutter, Herbert; Johnson, Hoyt

2013-07-01

A Technology Readiness Assessment (TRA) is a systematic, metric-based process and accompanying report that evaluates the maturity of the technologies used in systems; it is designed to measure technology maturity using the Technology Readiness Level (TRL) scale pioneered by the National Aeronautics and Space Administration (NASA) in the 1980's. More recently, DoD has adopted and provided systematic guidance for performing TRAs and determining TRLs. In 2007 the GAO recommended that the DOE adopt the NASA/DoD methodology for evaluating technology maturity. Earlier, in 2006-2007, DOE-EM had conducted pilot TRAs on a number of projects at Hanford and Savannah River. In Marchmore » 2008, DOE-EM issued a process guide, which established TRAs as an integral part of DOE-EM's Project Management Critical Decision Process. Since the development of its detailed TRA guidance in 2008, DOE-EM has continued to accumulate experience in the conduct of TRAs and the process for evaluating technology maturity. DOE has developed guidance on TRAs applicable department-wide. DOE-EM's experience with the TRA process, the evaluations that led to recently developed proposed revisions to the DOE-EM TRA/TMP Guide; the content of the proposed changes that incorporate the above lessons learned and insights are described. (authors)« less

Maturity Assessment of Space Plug-and-Play Architecture

DTIC Science & Technology

2013-03-01

SSM SPA Service Module SRL System Readiness Level TAT Time-at-Tone TRA Technology Readiness Assessment TRL Technology Readiness Level USB Universal...maturity assessment—the Technology Readiness Level (TRL) process, the Integration Readiness Level (IRL) process, and the System Readiness Level ( SRL ...is an important hallmark of the SPA concept, and makes possible the composability and scalability of system designs that employ it. 14 4. SPA

40 CFR 63.11566 - What definitions apply to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) used to manufacture shingles and rolled roofing products. Coating mixer means the equipment used to mix... substrate. Hot-mix asphalt operation means operations involved in mixing asphalt cement and aggregates to... determined gravimetrically using EPA Method 5A—Determination of Particulate Matter Emissions From the Asphalt...

40 CFR 60.472 - Standards for particulate matter.

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Standards of Performance for Asphalt Processing and Asphalt Roofing Manufacture § 60.472 Standards for particulate matter. (a) On and after the...) Particulate matter in excess of: (i) 0.04 kg/Mg (0.08 lb/ton) of asphalt shingle or mineral-surfaced roll...

Historical Architectural Survey of Delaware Water Gap National Recreational Area 1975. Volume 1.

DTIC Science & Technology

1975-01-01

Owner: Hazel V. Irvine (presently Blue Delft Antiques) Estimated Date: Circa 1900 Historic Name: None (Summer home for Owners of Dingman House Hotel ... Construction : 1-1/2-story, frame Foundation, stone piers Wood siding on gable ends Novelty siding on sides Roof, asphalt shingles . 2 Riverstone

Looking northwest, Face B Array to left, Face C (rear) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Looking northwest, Face B Array to left, Face C (rear) center, Power Plant (Building 5761), to right - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Techinical Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Synthesis and Biological Evaluation of Brain-Specific Anti-RNA Viral Agents

DTIC Science & Technology

1989-06-30

disease or ultimately death. DNA viruses are subdivided into five families and include the pathogens responsible for labial and genital herpes, chicken ... pox , shingles and mononucleosis. RNA viruses are present in more numerous forms and are subdivided into ten families. These viruses are unusual in

Laboratory evaluation of high asphalt binder replacement with recycled asphalt shingles (RAS) for a low n-design asphalt mixture.

DOT National Transportation Integrated Search

2012-10-01

This study investigated the effect of high asphalt binder replacement for a low N-design asphalt mixture including : RAP and RAS on performance indicators such as permanent deformation, fracture, fatigue potentials, and : stiffness, was studied. An e...

Within compound, looking northwest, Power Plant (Building 5761) and Guard ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, looking northwest, Power Plant (Building 5761) and Guard Tower (Building 5762) to left, Electrical Substation to right - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

NASA Environmental Control and Life Support Technology Development and Maturation for Exploration: 2015 to 2016 Overview

NASA Technical Reports Server (NTRS)

Schneider, Walter F.; Gatens, Robyn L.; Anderson, Molly S.; Broyan, James L.; MaCatangay, Ariel V.; Shull, Sarah A.; Perry, Jay L.; Toomarian, Nikzad

2016-01-01

Over the last year, the National Aeronautics and Space Administration (NASA) has continued to refine the understanding and prioritization of technology gaps that must be closed in order to achieve Evolvable Mars Campaign objectives and near term objectives in the cislunar proving ground. These efforts are reflected in updates to the technical area roadmaps released by NASA in 2015 and have guided technology development and maturation tasks that have been sponsored by various programs. This paper provides an overview of the refined Environmental Control and Life Support (ECLS) strategic planning, as well as a synopsis of key technology and maturation project tasks that occurred in 2014 and early 2015 to support the strategic needs. Plans for the remainder of 2015 and subsequent years are also described.

Spinstand demonstration of areal density enhancement using two-dimensional magnetic recording (invited)

NASA Astrophysics Data System (ADS)

Lippman, Thomas; Brockie, Richard; Coker, Jon; Contreras, John; Galbraith, Rick; Garzon, Samir; Hanson, Weldon; Leong, Tom; Marley, Arley; Wood, Roger; Zakai, Rehan; Zolla, Howard; Duquette, Paul; Petrizzi, Joe

2015-05-01

Exponential growth of the areal density has driven the magnetic recording industry for almost sixty years. But now areal density growth is slowing down, suggesting that current technologies are reaching their fundamental limit. The next generation of recording technologies, namely, energy-assisted writing and bit-patterned media, remains just over the horizon. Two-Dimensional Magnetic Recording (TDMR) is a promising new approach, enabling continued areal density growth with only modest changes to the heads and recording electronics. We demonstrate a first generation implementation of TDMR by using a dual-element read sensor to improve the recovery of data encoded by a conventional low-density parity-check (LDPC) channel. The signals are combined with a 2D equalizer into a single modified waveform that is decoded by a standard LDPC channel. Our detection hardware can perform simultaneous measurement of the pre- and post-combined error rate information, allowing one set of measurements to assess the absolute areal density capability of the TDMR system as well as the gain over a conventional shingled magnetic recording system with identical components. We discuss areal density measurements using this hardware and demonstrate gains exceeding five percent based on experimental dual reader components.

New Model of Information Technology Governance in the Government of Gorontalo City using Framework COBIT 4.1

NASA Astrophysics Data System (ADS)

Bouty, A. A.; Koniyo, M. H.; Novian, D.

2018-02-01

This study aims to determine the level of maturity of information technology governance in Gorontalo city government by applying the COBIT framework 4.1. The research method is the case study method, by conducting surveys and data collection at 25 institution in Gorontalo City. The results of this study is the analysis of information technology needs based on the measurement of maturity level. The results of the measurement of the maturity level of information technology governance shows that there are still many business processes running at lower level, from 9 existing business processes there are 4 processes at level 2 (repetitive but intuitive) and 3 processes at level 1 (Initial/Ad hoc). With these results, is expected that the government of Gorontalo city immediately make improvements to the governance of information technology so that it can run more effectively and efficiently.

CMMI Version 1.2 and Beyond Systems and Software Technology Conference

DTIC Science & Technology

2008-04-29

Presentation • “Extreme Programming (XP), Six Sigma, & CMMI: How They Can Work Together” • “CMMI V1.2 Model Changes” Presentation 5 CMMI Update: V1.2 and...Level 4 Reported Maturity Level 5 Reported Country Number of Appraisals Maturity Level 1 Reported Maturity Level 2 Reported Maturity Level 3...Reported Maturity Level 4 Reported Maturity Level 5 Reported Argentina 26 No Yes Yes Yes Yes Malaysia 29 No Yes Yes No Yes Australia 26 Yes Yes

Maturation of enabling technologies for the next generation reignitable cryogenic upper stage

NASA Astrophysics Data System (ADS)

Mueller, Mark

Following the ESA decision in November 2008, a pre-development phase (Phase 1) of a future evolution of the Ariane 5 launcher (named Ariane 5 Midlife Evolution, A5ME) was started under Astrium Prime leadership. This upgraded version of the Ariane 5 launcher is based on an enhanced performance Upper Stage including the cryogenic re-ignitable VINCI engine. Thanks to this reignition capability, this new Upper Stage shall be "versatile" in the sense that it shall fulfil customer needs on a broader spectrum of orbits than the "standard" orbits (i.e. Geosynchronous Transfer Orbits, GTO) typically used for commercial telecommunications satellites. In order to meet the challenges of versatility, new technologies are currently being investigated. These technologies are mainly related -but not limited-to propellant management during the extended coasting phases with the related heat transfer into the tanks and the required multiple engine re-ignitions. Within the frame of the ESA Future Launchers Preparatory Programme (Period 2 Slice 1), the Cryogenic Upper Stage Technology project (CUST) aims to mature critical technologies to such a Technology Readiness Level (TRL) that they can be integrated into the baseline A5ME Upper Stage development schedule. In addition to A5ME application, these technologies can also be used on the future next generation European launcher. This paper shows the down-selection process implemented to identify the most crucial enabling technologies for a future versatile Upper Stage and gives a description of each technology finally selected for maturation in the frame of CUST. These include -amongst others-a Sandwich Common Bulkhead for the propellant tank, an external thermal insulation kit and various propellant management devices for the coasting phase. The paper also gives an overview on the related development and maturation plan including the tests to be conducted, as well as first results of the maturation activities themselves.

Ares Project Technology Assessment: Approach and Tools

NASA Technical Reports Server (NTRS)

Hueter, Uwe; Tyson, Richard

2010-01-01

Technology assessments provide a status of the development maturity of specific technologies. Along with benefit analysis, the risks the project assumes can be quantified. Normally due to budget constraints, the competing technologies are prioritized and decisions are made which ones to fund. A detailed technology development plan is produced for the selected technologies to provide a roadmap to reach the desired maturity by the project s critical design review. Technology assessments can be conducted for both technology only tasks or for product development programs. This paper is primarily biased toward the product development programs. The paper discusses the Ares Project s approach to technology assessment. System benefit analysis, risk assessment, technology prioritization, and technology readiness assessment are addressed. A description of the technology readiness level tool being used is provided.

Landscape of Innovation for Cardiovascular Pharmaceuticals: From Basic Science to New Molecular Entities.

PubMed

Beierlein, Jennifer M; McNamee, Laura M; Walsh, Michael J; Kaitin, Kenneth I; DiMasi, Joseph A; Ledley, Fred D

2017-07-01

This study examines the complete timelines of translational science for new cardiovascular therapeutics from the initiation of basic research leading to identification of new drug targets through clinical development and US Food and Drug Administration (FDA) approval of new molecular entities (NMEs) based on this research. This work extends previous studies by examining the association between the growth of research on drug targets and approval of NMEs associated with these targets. Drawing on research on innovation in other technology sectors, where technological maturity is an important determinant in the success or failure of new product development, an analytical model was used to characterize the growth of research related to the known targets for all 168 approved cardiovascular therapeutics. Categorizing and mapping the technological maturity of cardiovascular therapeutics reveal that (1) there has been a distinct transition from phenotypic to targeted methods for drug discovery, (2) the durations of clinical and regulatory processes were significantly influenced by changes in FDA practice, and (3) the longest phase of the translational process was the time required for technology to advance from initiation of research to a statistically defined established point of technology maturation (mean, 30.8 years). This work reveals a normative association between metrics of research maturation and approval of new cardiovascular therapeutics and suggests strategies for advancing translational science by accelerating basic and applied research and improving the synchrony between the maturation of this research and drug development initiatives. Copyright © 2017 Elsevier HS Journals, Inc. All rights reserved.

Field performance of RAS test sections and laboratory investigation of impact of rejuvenators on engineering properties of RAP/RAS mixes.

DOT National Transportation Integrated Search

2014-04-01

In the last several years, recycled asphalt shingles (RAS), in addition to reclaimed asphalt pavement (RAP), : have been widely used in Texas. The use of RAS can significantly reduce the cost of asphalt mixtures, conserve : energy, and protect the en...

Product (P1) from project 0-6738 : performance studies and future directions for mixes containing RAP and RAS.

DOT National Transportation Integrated Search

2013-01-01

In recent years both reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS) have been widely used in asphalt mixes by the asphalt paving industry in Texas. The use of RAP and RAS can save tax payers money, and it is also good for the...

Venting of attics & cathedral ceilings

Treesearch

William B. Rose; Anton TenWolde

2002-01-01

Current building codes typically call for attic ventilation to minimize condensation on the underside of roof sheathing. Summer cooling of attic air, minimizing ice dams, and extending the service life of the roof materials often are cited as additional benefits of attic ventilation. In fact, most asphalt shingle manufacturers warrant their products only for ventilated...

Oregon's forest products industry: 1982.

Treesearch

James O. Howard

1984-01-01

This report presents the findings of a 100-percent survey of the primary forest products industry in Oregon for 1982. The survey included the following sectors: lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tabular presentations include characteristics of the industry, nature and flow of logs consumed, and...

Full-Genome Sequence of a Novel Varicella-Zoster Virus Clade Isolated in Mexico

PubMed Central

Rodríguez-Castillo, Araceli; Ortiz-Alcántara, Joanna María; Gonzalez-Durán, Elizabeth; Segura-Candelas, José Miguel; Pérez-Agüeros, Sandra Ivette; Escobar-Escamilla, Noé; Méndez-Tenorio, Alfonso; Diaz-Quiñonez, José Alberto

2015-01-01

Varicella-zoster virus (VZV) is a member of the Herpesviridae family, which causes varicella (chicken pox) and herpes zoster (shingles) in humans. Here, we report the complete genome sequence of varicella-zoster virus, isolated from a vesicular fluid sample, revealing the circulation of VZV clade VIII in Mexico. PMID:26159533

Near Zero Energy Housing at Ft. Campbell: Energy Modeling Results

DTIC Science & Technology

2007-05-01

Excellence Baseline Ft. Campbell Single Family Home 2 Story 2,100 ft2 living space 325 ft2 garage 2 x 4 metal frame R-13 batt in wall Asphalt shingle ...Model south facing windows with overhangs to take advantage of solar gain in winter, and shading summer sun Construction cost estimates for

Production, management, and environment symposium: Environmental footprint of livestock production - Greenhouse gas emissions and climate change

USDA-ARS?s Scientific Manuscript database

This manuscript is the introduction to the 2015 Production, Management, and Environment symposium titled “Environmental Footprint of Livestock Production – Greenhouse Gas Emissions and Climate Change” that was held at the Joint Annual Meeting of the ASAS and ADSA at the Rosen Shingle Creek Resort in...

NIHSeniorHealth Celebrating 10 Years of online health and wellness information! | NIH MedlinePlus the Magazine

MedlinePlus

... information Open captioned videos Easy-to-read language Research-based Content Over 60 health topics 150 health videos Over 200 quizzes Frequently asked questions Bi-weekly healthy aging tips Most Popular Health Topics Exercise and Physical Activity * Eating Well as You Get Older * Shingles * ...

40 CFR 60.472 - Standards for particulate matter.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standards for particulate matter. 60... Processing and Asphalt Roofing Manufacture § 60.472 Standards for particulate matter. (a) On and after the...) Particulate matter in excess of: (i) 0.04 kg/Mg (0.08 lb/ton) of asphalt shingle or mineral-surfaced roll...

40 CFR 60.472 - Standards for particulate matter.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 7 2013-07-01 2013-07-01 false Standards for particulate matter. 60... Processing and Asphalt Roofing Manufacture § 60.472 Standards for particulate matter. (a) On and after the...) Particulate matter in excess of: (i) 0.04 kg/Mg (0.08 lb/ton) of asphalt shingle or mineral-surfaced roll...

40 CFR 60.472 - Standards for particulate matter.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 7 2014-07-01 2014-07-01 false Standards for particulate matter. 60... Processing and Asphalt Roofing Manufacture § 60.472 Standards for particulate matter. (a) On and after the...) Particulate matter in excess of: (i) 0.04 kg/Mg (0.08 lb/ton) of asphalt shingle or mineral-surfaced roll...

40 CFR 60.472 - Standards for particulate matter.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Standards for particulate matter. 60... Processing and Asphalt Roofing Manufacture § 60.472 Standards for particulate matter. (a) On and after the...) Particulate matter in excess of: (i) 0.04 kg/Mg (0.08 lb/ton) of asphalt shingle or mineral-surfaced roll...

77 FR 27262 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Order Approving a...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-09

... University Law School, and Director, Cornell Securities Law Clinic, and Brenda Beauchamp, Cornell Law School... letter from Jill I. Gross, Director, Edward Pekarek, Assistant Director, and Genavieve Shingle, Student..., scheduling, and traveling to hearings; (3) it would provide an alternative for customers who are unable to...

California's forest products industry: 1982.

Treesearch

James O. Howard

1984-01-01

This report presents the findings of a 100-percent survey of the primary forest products industry in California for 1982. The survey included the following sectors: lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tabular presentations include characteristics of the industry, nature and flow of logs consumed, and...

California's forest products industry: 1985.

Treesearch

James O. Howard; Franklin R. Ward

1988-01-01

This report presents the findings of a 100-percent survey of the primary forest products industry in California for 1985. The survey included the following sectors: lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tables, presented by sector and for the industry as a whole, include characteristics of the industry,...

California's forest products industry: 1992.

Treesearch

Franklin R. Ward

1995-01-01

This report presents the findings of a survey of primary forest products industries in California for 1992. The survey included the following sectors: lumber; pulp and board; shake and shingle; export; and post, pole, and piling. Veneer and plywood mills are not included because they could not be presented without disclosing critical details. Tables, presented by...

California's forest products industry: 1994.

Treesearch

Franklin R. Ward

1997-01-01

This report presents the findings of a survey of primary forest products industries in California for 1994. The survey included the following sectors: lumber; veneer; pulp and board; shake and shingle; export; and post, pole, and piling. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs...

Exterior, looking west, Equipment Building to left, Tower at center, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Exterior, looking west, Equipment Building to left, Tower at center, Civil Engineering Storage Building (Building 5765) at left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, Microwave Equipment Building, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Performance and operational analysis of a liquid desiccant open-flow solar collector

NASA Astrophysics Data System (ADS)

Grodzka, P. G.; Rico, S. S.

1982-10-01

Theoretical predictions of the heat and mass transfer in an open flow solar collector used in conjunction with an absorption chiller are compared with performance data from a rooftop system. The study focuses on aqueous solutions of a hygroscopic salt, e.g., LiCl, flowing continuously over a solar absorbing surface. Water in the solution sublimes to a region of lower vapor pressure, i.e., the atmosphere. Direction of the water-depleted dessiccant to a storage volume and then to circulation around an evaporator unit permits operation of a solar-powered air conditioner. A closed form solution was defined for the heat and mass transfer, along with a finite difference solution. The system studied comprised a sloped roof top with 2500 sq ft of asphalt shingles, collector pipes beneath the shingles, and two 500 gal storage tanks. Relatively good agreement was found between the models and the recorded data, although some discrepancies were present when considering temperatures and performance at specific times of day. The measured 30-40% efficiencies indicated that further development of the system is warranted.

Performance of a Haynes 188 metallic standoff thermal protection system at Mach 7

NASA Technical Reports Server (NTRS)

Avery, D. E.

1981-01-01

A flight weight, metallic thermal protection system (TPS) model applicable to reentry and hypersonic vehicles was subjected to multiple cycles of both radiant and aerothermal heating to evaluate its aerothermal performance and structural integrity. The TPS was designed for a maximum operating temperature of 1255 K and featured a shingled, corrugation stiffened corrugated skin heat shield of Haynes 188, a cobalt base alloy. The model was subjected to 3 radiant preheat/aerothermal tests for a total of 67 seconds and to 15 radiant heating tests for a total of 85.9 minutes at 1255 K. The TPS limited the primary structure to temperatures below 430 K in all tests. No catastrophic failures occurred in the heat shields, supports, or insulation system. The TPS continued to function even after exposure to a differential temperature 4 times the design value produced thermal buckles in the outer skin. The shingled thermal expansion joint effectively allowed for thermal expansion of the heat shield without allowing any appreciable hot gas flow into the model cavity, even though the overlap gap between shields increased after several thermal cycles.

Sequential retinal necrosis secondary to varicella zoster in unrecognised long-standing HIV infection: patient safety report.

PubMed

Ning, Brigid Ky; Kelly, Simon P; Chu, Celia; Morgan, Emile

2018-03-21

A retired woman with left ophthalmic shingles of over 2 years' duration attended with bilateral vision loss and systemic upset. Acute retinal necrosis with detachment was detected on right fundus examination. Cataract in left eye precluded funduscopy. Ocular ultrasonography revealed fibrotic retinal detachment in the left eye. MRI brain and orbits also showed signals of retinal detachment. No abnormal MRI signal within the optic nerve or brain was found. Varicella zoster virus was detected in ocular aqueous and blood samples. High-dose intravenous acyclovir was administered. HIV test was positive with a very low CD4 count. Antiretroviral medications were prescribed. There was no recovery of vision. She was certified as blind, and social services were involved in seeking to provide alterations to her home in view of her severe disability. This case highlights the importance of suspecting HIV in patients with severe or chronic ophthalmic shingles. Images and implications for clinical practice are presented. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Areal density optimizations for heat-assisted magnetic recording of high-density media

NASA Astrophysics Data System (ADS)

Vogler, Christoph; Abert, Claas; Bruckner, Florian; Suess, Dieter; Praetorius, Dirk

2016-06-01

Heat-assisted magnetic recording (HAMR) is hoped to be the future recording technique for high-density storage devices. Nevertheless, there exist several realization strategies. With a coarse-grained Landau-Lifshitz-Bloch model, we investigate in detail the benefits and disadvantages of a continuous and pulsed laser spot recording of shingled and conventional bit-patterned media. Additionally, we compare single-phase grains and bits having a bilayer structure with graded Curie temperature, consisting of a hard magnetic layer with high TC and a soft magnetic one with low TC, respectively. To describe the whole write process as realistically as possible, a distribution of the grain sizes and Curie temperatures, a displacement jitter of the head, and the bit positions are considered. For all these cases, we calculate bit error rates of various grain patterns, temperatures, and write head positions to optimize the achievable areal storage density. Within our analysis, shingled HAMR with a continuous laser pulse moving over the medium reaches the best results and thus has the highest potential to become the next-generation storage device.

Advanced Mirror Technology Development (AMTD) for Very Large Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2014-01-01

Advanced Mirror Technology Development (AMTD) is a multi-year effort to systematically mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review. This technology must enable missions capable of both general astrophysics & ultra-high contrast observations of exoplanets. To accomplish our objective, We use a science-driven systems engineering approach. We mature technologies required to enable the highest priority science AND result in a high-performance low-cost low-risk system.

Engineering Specifications derived from Science Requirements

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Arnold, William; Bevan, Ryan M.; Smith, W. Scott; Kirk, Charles S.; Postman, Marc

2013-01-01

Advanced Mirror Technology Development (AMTD) is a multi-year effort to systematically mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review. This technology must enable missions capable of both general astrophysics & ultra-high contrast observations of exoplanets. To accomplish our objective, we use a science-driven systems engineering approach. We mature technologies required to enable the highest priority science AND result in a high-performance low-cost low-risk system.

[The impact of population growth on Tamba Kosi, a Himalayan valley in Nepal].

PubMed

Verliat, S

1994-01-01

Two several-month-long stays in the isolated Tamba Kosi valley in Nepal in 1983 and 1986 allowed an assessment of the importance of changes in rural societies. In about 50 years, the oldest inhabitants of some villages have seen the number of houses quadruple. In the absence of reliable statistical data, the inhabitants say that the Tamba Kosi valley population has doubled in the last 25 years. This population growth exacerbates the multiethnic fight for good land (i.e., ground of modest slope, hot, and humid). Many people have emigrated, which has somewhat eased problems relative to population growth. Soil degradation, which is becoming more and more acute, drives the inhabitants to cut down trees and clear the land for cultivation of new plots. These new plots are running up against steep slopes and high altitude. Most families have barely two hectares, which must suffice to feed 5-6 people on average. This fuels intensification of agricultural production, resulting in low efficacy. Livestock mutilate forests with their hooves and teeth. The marked increase in the variety of livestock accelerates this destruction. Three types of building materials are used in this high valley: thatch, shingles (fir tree), and bamboo matting. The disappearance of wild grasses used to make thatch roofs and people moving to higher and higher altitudes resulted in use of shingles to make roofs. Buildings made of shingles, which demanded changes in construction techniques, changed the conception of homes. They became the preferred building type, which increased the demand for fir trees and deforestation. This lead to a demand for roofing material made of bamboo matting and another change in construction techniques. The retreat of the forest and disappearance of the most wanted plant species are the most spectacular impacts of population growth. This environmental degradation exacerbates erosion at all bioclimatic altitudes.

Using Technology in Teacher Preparation: Two Mature Teacher Educators Negotiate the Steep Learning Curve

ERIC Educational Resources Information Center

Monroe, Eula; Tolman, Marvin

2004-01-01

This paper chronicles the ventures of two mature faculty members who continue to negotiate their own steep learning curves in helping teacher education students use current technology. It describes the scaffolding provided within the university setting for the faculty members' growth. Included are elements supported by a PT3 grant that have…

Defense Acquisitions: Assessments of Selected Weapon Programs

DTIC Science & Technology

2015-03-01

offices on technology, design , and manufacturing knowledge; the use of knowledge- based acquisition practices; and the implementation of acquisition...and production maturity using two data-collection instruments, including a questionnaire on issues such as systems engineering reviews, design ...Demonstrating technology maturity is a prerequisite for moving forward into system development, during which the focus should be on design and

Maturing Glycoproteomics Technologies Provide Unique Structural Insights into the N-glycoproteome and Its Regulation in Health and Disease*

PubMed Central

Packer, Nicolle H.; Schulz, Benjamin L.

2016-01-01

The glycoproteome remains severely understudied because of significant analytical challenges associated with glycoproteomics, the system-wide analysis of intact glycopeptides. This review introduces important structural aspects of protein N-glycosylation and summarizes the latest technological developments and applications in LC-MS/MS-based qualitative and quantitative N-glycoproteomics. These maturing technologies provide unique structural insights into the N-glycoproteome and its synthesis and regulation by complementing existing methods in glycoscience. Modern glycoproteomics is now sufficiently mature to initiate efforts to capture the molecular complexity displayed by the N-glycoproteome, opening exciting opportunities to increase our understanding of the functional roles of protein N-glycosylation in human health and disease. PMID:26929216

Prevention of residential roof fires by use of a class "A" fire rated roof system.

PubMed

Edlich, Richard F; Winters, Kathryne L; Long, William B; Britt, L D

2004-01-01

Because residential roof fires remain a life-threatening danger to residential homeowners in the United States, we describe in detail a national fire prevention program for reducing residential roof fires by use of an Underwriters Laboratories Inc. (UL) and National Fire Protection Association Class A fire rated roof system. This Class A system should comply with the test requirements for fire resistance of roof coverings, as outlined in UL 790 or in ASTM International (ASTM) E-108. Both the Asphalt Roofing Manufacturer's Association (ARMA) and the National Roofing Contractors Association (NRCA) have set up guidelines for selecting a new roof for the homeowner. Class A, fiber-glass-based asphalt roofing shingles represent an overwhelming share of the United States residential roofing market, and, as such, the Class A rated roofing system remains an excellent alternative to wood shingles and shakes. Fortunately, the Class A fire rating is available for certain wood shingle products that incorporate a factory-applied, fire resistant treatment. However, in this circumstance, wood products labeled as Class B shakes or shingles must be installed over spaced or solid sheathing that have been covered either with one layer of 1/4 in. (6.4 mm) thick noncombustible roof board, or with one layer of minimum 72-lb. fiber-glass-based mineral surfaced cap sheet, or with another specialty roofing sheet to obtain the Class A fire rating. Clay, tile, slate, and metal have been assigned Class A fire ratings in the codes (but often without testing). These alternative roofing materials are often considerably more expensive. Proper application, ventilation, and insulation of roofing systems are required to prevent heat and moisture buildup in the attic, which can damage the roofing system, making it more susceptible to water leakage as well as ignition in the event of a fire. The NRCA has devised excellent recommendations for the homeowner to prequalify the contractor. In addition, a warranty for any new roofing material is important for the homeowner to ensure that the roofing can be repaired by the contractor or manufacturer during the specified warranty period, in case of contractor error or a manufacturing defect. In addition, the homeowner should ensure that the warranty is transferable to any future owner of the home to allow the buyer to have the same warranty benefits as the original owner. The State of California has mandated strict roofing requirements to prevent residential fires. In the absence of this legislation in other states, the homeowner must follow the guidelines outlined in this collective review to ensure that a roofing system with Class A fire protection is installed. Other fire safety precautions that should also be considered mandatory are to include smoke alarms, escape plans, and retrofit fire sprinklers.

Applying Formal Methods to NASA Projects: Transition from Research to Practice

NASA Technical Reports Server (NTRS)

Othon, Bill

2009-01-01

NASA project managers attempt to manage risk by relying on mature, well-understood process and technology when designing spacecraft. In the case of crewed systems, the margin for error is even tighter and leads to risk aversion. But as we look to future missions to the Moon and Mars, the complexity of the systems will increase as the spacecraft and crew work together with less reliance on Earth-based support. NASA will be forced to look for new ways to do business. Formal methods technologies can help NASA develop complex but cost effective spacecraft in many domains, including requirements and design, software development and inspection, and verification and validation of vehicle subsystems. To realize these gains, the technologies must be matured and field-tested so that they are proven when needed. During this discussion, current activities used to evaluate FM technologies for Orion spacecraft design will be reviewed. Also, suggestions will be made to demonstrate value to current designers, and mature the technology for eventual use in safety-critical NASA missions.

Technology readiness levels for the new millennium program

NASA Technical Reports Server (NTRS)

Moynihan, P. I.; Minning, C. P.; Stocky, J. F.

2003-01-01

NASA's New Millennium Program (NMP) seeks to advance space exploration by providing an in-space validating mechanism to verify the maturity of promising advanced technologies that cannot be adequately validated with Earth-based testing alone. In meeting this objective, NMP uses NASA Technology Readiness Levels (TRL) as key indicators of technology advancement and assesses development progress against this generalized metric. By providing an opportunity for in-space validation, NMP can mature a suitable advanced technology from TRL 4 (component and/or breadboard validation in laboratory environment) to a TRL 7 (system prototype demonstrated in an Earth-based space environment). Spaceflight technology comprises a myriad of categories, types, and functions, and as each individual technology emerges, a consistent interpretation of its specific state of technological advancement relative to other technologies is problematic.

Technology Maturity for the Habitable-zone Exoplanet Imaging Mission (HabEx) Concept

NASA Astrophysics Data System (ADS)

Morgan, Rhonda; Warfield, Keith R.; Stahl, H. Philip; Mennesson, Bertrand; Nikzad, Shouleh; nissen, joel; Balasubramanian, Kunjithapatham; Krist, John; Mawet, Dimitri; Stapelfeldt, Karl; warwick, Steve

2018-01-01

HabEx Architecture A is a 4m unobscured telescope optimized for direct imaging and spectroscopy of potentially habitable exoplanets, and also enables a wide range of general astrophysics science. The exoplanet detection and characterization drives the enabling core technologies. A hybrid starlight suppression approach of a starshade and coronagraph diversifies technology maturation risk. In this poster we assess these exoplanet-driven technologies, including elements of coronagraphs, starshades, mirrors, jitter mitigation, wavefront control, and detectors. By utilizing high technology readiness solutions where feasible, and identifying required technology development that can begin early, HabEx will be well positioned for assessment by the community in 2020 Astrophysics Decadal Survey.

High-Power Solar Electric Propulsion for Future NASA Missions

NASA Technical Reports Server (NTRS)

Manzella, David; Hack, Kurt

2014-01-01

NASA has sought to utilize high-power solar electric propulsion as means of improving the affordability of in-space transportation for almost 50 years. Early efforts focused on 25 to 50 kilowatt systems that could be used with the Space Shuttle, while later efforts focused on systems nearly an order of magnitude higher power that could be used with heavy lift launch vehicles. These efforts never left the concept development phase in part because the technology required was not sufficiently mature. Since 2012 the NASA Space Technology Mission Directorate has had a coordinated plan to mature the requisite solar array and electric propulsion technology needed to implement a 30 to 50 kilowatt solar electric propulsion technology demonstration mission. Multiple solar electric propulsion technology demonstration mission concepts have been developed based on these maturing technologies with recent efforts focusing on an Asteroid Redirect Robotic Mission. If implemented, the Asteroid Redirect Vehicle will form the basis for a capability that can be cost-effectively evolved over time to provide solar electric propulsion transportation for a range of follow-on mission applications at power levels in excess of 100 kilowatts.

Determination of Optimum Vitamin D Nutrition in Young Women

DTIC Science & Technology

2012-10-01

03/10/2010 03/17/2010 Life Threatening Definitely Not 5/18/2009 4/20/2010 60270 400 Fronto-temporal craniotomy / resection of hemangioma 03/17...sinus infection 10/16/2009 10/26/2009 No 60252 shingles 11/16/2009 12/5/2009 No 60252 chest cold w/ cough & drainage 2/23/2010 No 60252

3rd Generation Thermal Imager Sensor Performance

DTIC Science & Technology

2006-11-01

suffers in the day compared to the night. This degradation is related to high levels of daytime clutter caused by solar reflections and loading and...1 2 3 4 5 LWIR σT (K) M W IR σ T (K ) MWIR = LWIR White Building Block Door Road Roof Shingle Window Rural Backgrounds: MWIR σT vs LWIR σT

A performance comparison of asphalt mixtures modified with hydrated lime, polymer modified binder and reclaimed asphalt shingles (RAS) on Route 50 Moniteau, Morgan and Pettis counties.

DOT National Transportation Integrated Search

2013-03-01

Hydrated lime was required in high traffic asphalt mixtures controlled by Section 403 of the Missouri Standard Specifications for Highway Construction from the late 1980s through much of the 1990s primarily as an anti-stripping agent but also f...

77 FR 22374 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-13

... I. Gross, Director, Edward Pekarek, Assistant Director, and Genavieve Shingle, Student Intern... finds good cause, pursuant to Section 19(b)(2) of the Act \\11\\ for approving the proposed rule change... that good cause exists to approve the proposal, as modified by Amendment No. 1, on an accelerated basis...

Silvical characteristics of Atlantic white-cedar (Chamaecyparis thyoides)

Treesearch

S. Little

1959-01-01

Atlantic white-cedar ((Chamaecyparis thyoides (L.) B.S.P.) has been a highly prized species since Colonial times because of the durability and high quality of its wood. The wood has been used for many purposes: boat boards, shingles and lath, framing, house and boat finish, pails and tanks, cabin logs, posts, and poles. Good white-cedar has always...

A profile of wood use in nonresidential building construction

Treesearch

H. N. Spelter; R. G. Anderson

This report presents estimates of the amounts of lumber, glued-laminated lumber, trusses, plywood, particleboard, hardboard, and wood shingles used in new nonresidential building construction in the United States. Use of wood products is shown for several building types, project sizes, and building components. The estimates are based on a survey of 489 projects under...

The Rise of the Essay Coach

ERIC Educational Resources Information Center

Gose, Ben

2007-01-01

College admissions essay coaches have been hanging out shingles since the early 1990s. The business has grown sharply over the past decade thanks to the ease of editing via the Internet and students' desire to gain any possible edge as many colleges have become more selective. The companies, with names like Cambridge Essay Service, EssayEdge,…

Oregon's forest products industry: 1988.

Treesearch

James O. Howard; Franklin R. Ward

1991-01-01

This report presents the findings of a survey of all primary forest products industries in Oregon for 1988. The survey included the following sectors: lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of...

California's forest products industry: 1988.

Treesearch

James O. Howard; Franklln R. Ward

1991-01-01

This report presents the findings of a survey of all primary forest products industries in California for 1988. The survey included the following sectors: lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow...

Oregon's forest products industry: 1985.

Treesearch

James O. Howard; Franklin R. Ward

1988-01-01

This report presents the findings of a 100-percent survey of the primary forest products industry in Oregon for 1985. The survey included the following sectors: lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature...

Oregon's forest products industry: 1992.

Treesearch

Franklin R. Ward

1995-01-01

This report presents the findings of a survey of primary forest products industries in. Oregon for 1992. The survey included the following sectors: lumber; veneer and plywood; pulp and board; shake and shingle; export; and post, pole, and piling. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of...

Oregon's forest products industry: 1994.

Treesearch

Franklin R. Ward

1997-01-01

This report presents the findings of a survey of primary forest products industries in Oregon for 1994. The survey included the following sectors: lumber; veneer; pulp and board; shake and shingle; export; and post, pole, and piling. Tables, presented by sector and for the industry as a whole, include characteristics of the industry, nature and flow of logs consumed,...

Asphalt Pavements Session 2E-2 : Missouri's Use of Recycled Asphalt Shingles in Hot Asphalt [SD .WMV (720x480/29fps/289.0 MB)

DOT National Transportation Integrated Search

2003-12-01

This study evaluates one of the recycling techniques used to rehabilitate pavement, called Cold In-Place Recycling (CIR). CIR is one of the fastest growing road rehabilitation techniques because it is quick and cost-effective. The document reports on...

Within compound, from Guard Tower, looking southeast, Power Plant (Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, from Guard Tower, looking southeast, Power Plant (Building 5761) to left, Satellite Communications Terminal (Building 5771) center, Supply Warehouse (Building 5768) to left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Enabling Dedicated, Affordable Space Access Through Aggressive Technology Maturation

NASA Technical Reports Server (NTRS)

Jones, Jonathan E.; Kibbey, Timothy P.; Cobb, C. Brent; Harris, Lawanna L.

2014-01-01

A launch vehicle at the scale and price point which allows developers to take reasonable risks with high payoff propulsion and avionics hardware solutions does not exist today. Establishing this service provides a ride through the proverbial technology "valley of death" that lies between demonstration in laboratory and flight environments. NASA's NanoLaunch effort will provide the framework to mature both earth-to-orbit and on-orbit propulsion and avionics technologies while also providing affordable, dedicated access to low earth orbit for cubesat class payloads.

L-8: Docking Systems and Other Attachment/Release Mechanisms and Related Technologies

NASA Technical Reports Server (NTRS)

Lewis, James

2016-01-01

We are sharpening our focus on Human Space Flight (HSF) Exploration Beyond Low Earth Orbit. We want to ensure that HSF technologies are ready to take Humans to Mars in the 2030s. Various Roadmaps define the needed technologies. We are attempting to define our activities and dependencies. Our Goal: Get within 8 years of launching humans to Mars (L-8) by 2025. Develop and Mature the technologies and systems needed. Develop and Mature the personnel needed. We need collaborators to make it happen, and we think they can benefit by working with us.

Overview and Recent Accomplishments of Advanced Mirror Technology Development Phase 2 (AMTD-2)

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2015-01-01

AMTD uses a science-driven systems engineering approach to define & execute a long-term strategy to mature technologies necessary to enable future large aperture space telescopes. Because we cannot predict the future, we are pursuing multiple technology paths including monolithic & segmented mirrors. Assembled outstanding team from academia, industry & government; experts in science & space telescope engineering. Derived engineering specifications from science measurement needs & implementation constraints. Maturing 6 critical technologies required to enable 4 to 8 meter UVOIR space telescope mirror assemblies for both general astrophysics & ultra-high contrast exoplanet imaging. AMTD achieving all its goals & accomplishing all its milestones.

Flight Development for Cryogenic Fluid Management in Support of Exploration Missions

NASA Technical Reports Server (NTRS)

Chato, David J.

2006-01-01

This paper describes the results of the "Experimentation for the Maturation of Deep Space Cryogenic Refueling Technology" study. The purposes of this study were to identify cryogenic fluids management technologies requiring low gravity flight experiments to bring to technology readiness level (TRL) 5-6; to study many possible flight experiment options; and to develop near-term low-cost flight experiment concepts to mature core technologies of refueling. A total of twenty-five white papers were prepared in the course of this study. Each white paper is briefly summarized and relevant references cited. A total of 90 references are cited.

Maturing Technologies for Stirling Space Power Generation

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Nowlin, Brentley C.; Dobbs, Michael W.; Schmitz, Paul C.; Huth, James

2016-01-01

Stirling Radioisotope Power Systems (RPS) are being developed as an option to provide power on future space science missions where robotic spacecraft will orbit, flyby, land or rove. A Stirling Radioisotope Generator (SRG) could offer space missions a more efficient power system that uses one fourth of the nuclear fuel and decreases the thermal footprint of the current state of the art. The RPS Program Office, working in collaboration with the U.S. Department of Energy (DOE), manages projects to develop thermoelectric and dynamic power systems, including Stirling Radioisotope Generators (SRGs). The Stirling Cycle Technology Development (SCTD) Project, located at Glenn Research Center (GRC), is developing Stirling-based subsystems, including convertors and controllers. The SCTD Project also performs research that focuses on a wide variety of objectives, including increasing convertor temperature capability to enable new environments, improving system reliability or fault tolerance, reducing mass or size, and developing advanced concepts that are mission enabling. Research activity includes maturing subsystems, assemblies, and components to prepare them for infusion into future convertor and generator designs. The status of several technology development efforts are described here. As part of the maturation process, technologies are assessed for readiness in higher-level subsystems. To assess the readiness level of the Dual Convertor Controller (DCC), a Technology Readiness Assessment (TRA) was performed and the process and results are shown. Stirling technology research is being performed by the SCTD Project for NASA's RPS Program Office, where tasks focus on maturation of Stirling-based systems and subsystems for future space science missions.

Overview and Recent Accomplishments of the Advanced Mirror Technology Development (AMTD) for Large Aperture UVOIR Space Telescopes Project

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2013-01-01

Per Astro2010, a new, larger UVO telescope is needed to answer fundamental scientific questions, such as: is there life on Earth-like exoplanets; how galaxies assemble stellar populations; how baryonic matter interacts with intergalactic medium; and how solar systems form and evolve. And, present technology is not mature enough to affordably build and launch any potential UVO concept. Advanced Mirror Technology Development (AMTD) is a funded SAT project. Our objective is to mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review. AMTD uses a science-driven systems engineering approach. We mature technologies required to enable the highest priority science AND result in a high-performance low-cost low-risk system. To provide the science community with options, we are pursuing multiple technology paths. We have assembled an outstanding team from academia, industry, and government with extensive expertise in astrophysics and exoplanet characterization, and in the design/manufacture of monolithic and segmented space telescopes. One of our key accomplishments is that we have derived engineering specifications for advanced normal-incidence monolithic and segmented mirror systems needed to enable both general astrophysics and ultra-high contrast observations of exoplanets missions as a function of potential launch vehicle and its inherent mass and volume constraints. We defined and initiated a program to mature 6 key technologies required to fabricate monolithic and segmented space mirrors.

Joint Strike Figher Acquisition: Mature Critical Technologies Needed to Reduce Risks

DTIC Science & Technology

2001-10-01

Reduce Risks GAO-02-39 Report Documentation Page Report Date 00OCT2001 Report Type N/A Dates Covered (from... to) - Title and Subtitle JOINT STRIKE...FIGHTER ACQUISITION: Mature Critical Technologies Needed to Reduce Risks Contract Number Grant Number Program Element Number Author(s) Project...1Joint Strike Fighter Acquisition: Development Schedule Should Be Changed to Reduce Risks (GAO/T-NSIAD-00-132

SCRL-Model for Human Space Flight Operations Enterprise Supply Chain

NASA Technical Reports Server (NTRS)

Tucker, Brian; Paxton, Joseph

2010-01-01

This paper will present a Supply Chain Readiness Level (SCRL) model that can be used to evaluate and configure adaptable and sustainable program and mission supply chains at an enterprise level. It will also show that using SCRL in conjunction with Technology Readiness Levels (TRLs), Manufacturing Readiness Levels (MRLs) and National Aeronautics Space Administrations (NASA s) Project Lifecycle Process will provide a more complete means of developing and evaluating a robust sustainable supply chain that encompasses the entire product, system and mission lifecycle. In addition, it will be shown that by implementing the SCRL model, NASA can additionally define supplier requirements to enable effective supply chain management (SCM). Developing and evaluating overall supply chain readiness for any product, system and mission lifecycle is critical for mission success. Readiness levels are presently being used to evaluate the maturity of technology and manufacturing capability during development and deployment phases of products and systems. For example, TRLs are used to support the assessment of the maturity of a particular technology and compare maturity of different types of technologies. MRLs are designed to assess the maturity and risk of a given technology from a manufacturing perspective. In addition, when these measurement systems are used collectively they can offer a more comprehensive view of the maturity of the system. While some aspects of the supply chain and supply chain planning are considered in these familiar metric systems, certain characteristics of an effective supply chain, when evaluated in more detail, will provide an improved insight into the readiness and risk throughout the supply chain. Therefore, a system that concentrates particularly on supply chain attributes is required to better assess enterprise supply chain readiness.

Biotechnology Challenges to In Vitro Maturation of Hepatic Stem Cells.

PubMed

Chen, Chen; Soto-Gutierrez, Alejandro; Baptista, Pedro M; Spee, Bart

2018-04-01

The incidence of liver disease is increasing globally. The only curative therapy for severe end-stage liver disease, liver transplantation, is limited by the shortage of organ donors. In vitro models of liver physiology have been developed and new technologies and approaches are progressing rapidly. Stem cells might be used as a source of liver tissue for development of models, therapies, and tissue-engineering applications. However, we have been unable to generate and maintain stable and mature adult liver cells ex vivo. We review factors that promote hepatocyte differentiation and maturation, including growth factors, transcription factors, microRNAs, small molecules, and the microenvironment. We discuss how the hepatic circulation, microbiome, and nutrition affect liver function, and the criteria for considering cells derived from stem cells to be fully mature hepatocytes. We explain the challenges to cell transplantation and consider future technologies for use in hepatic stem cell maturation, including 3-dimensional biofabrication and genome modification. Copyright © 2018 AGA Institute. Published by Elsevier Inc. All rights reserved.

Full-Genome Sequence of a Novel Varicella-Zoster Virus Clade Isolated in Mexico.

PubMed

Garcés-Ayala, Fabiola; Rodríguez-Castillo, Araceli; Ortiz-Alcántara, Joanna María; Gonzalez-Durán, Elizabeth; Segura-Candelas, José Miguel; Pérez-Agüeros, Sandra Ivette; Escobar-Escamilla, Noé; Méndez-Tenorio, Alfonso; Diaz-Quiñonez, José Alberto; Ramirez-González, José Ernesto

2015-07-09

Varicella-zoster virus (VZV) is a member of the Herpesviridae family, which causes varicella (chicken pox) and herpes zoster (shingles) in humans. Here, we report the complete genome sequence of varicella-zoster virus, isolated from a vesicular fluid sample, revealing the circulation of VZV clade VIII in Mexico. Copyright © 2015 Garcés-Ayala et al.

Photovoltaic Roofs

NASA Technical Reports Server (NTRS)

Drummond, R. W., Jr.; Shepard, N. F., Jr.

1984-01-01

Solar cells perform two functions: waterproofing roof and generating electricity. Sections through horizontal and slanting joints show overlapping modules sealed by L-section rubber strips and side-by-side modules sealed by P-section strips. Water seeping through seals of slanting joints drains along channels. Rooftop photovoltaic array used watertight south facing roof, replacing shingles, tar, and gravel. Concept reduces cost of residential solar-cell array.

Turbine rotor-stator leaf seal and related method

DOEpatents

Herron, William Lee; Butkiewicz, Jeffrey John

2003-01-01

A seal assembly for installation between rotating and stationary components of a machine includes a first plurality of leaf spring segments secured to the stationary component in a circumferential array surrounding the rotating component, the leaf spring segments each having a radial mounting portion and a substantially axial sealing portion, the plurality of leaf spring segments shingled in a circumferential direction.

1. GENERAL VIEW OF LOG POND AND BOOM FOR UNLOADING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. GENERAL VIEW OF LOG POND AND BOOM FOR UNLOADING CEDAR LOGS FROM TRUCKS AT LOG DUMP, ADJACENT TO MILL; TRUCKS FORMERLY USED TRIP STAKES, THOUGH FOR SAFER HANDLING OF LOGS WELDED STAKES ARE NOW REQUIRED; AS A RESULT LOADING IS NOW DONE WITH A CRANE - Lester Shingle Mill, 1602 North Eighteenth Street, Sweet Home, Linn County, OR

Northern white-cedar (Thuja occidentalis L.): an annotated bibliography

Treesearch

Philip V. Hofmeyer; Laura S. Kenefic; Robert S. Seymour

2007-01-01

Northern white-cedar (Thuja occidentalis L.) is arguably one of the least studied commercial tree species in United States and Canada. It is an important source of wildlife habitat and forage, as well as commodities such as fence posts, shingles and siding. Much of the research on this species comes from the Lake States and Canada; few studies have...

Within compound, from Guard Tower (Building 5762), looking southwest, Technical ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, from Guard Tower (Building 5762), looking southwest, Technical Equipment Building (Building 5760) to left, Microwave Tower (associated with Building 5769) and Civil Engineering Storage Building (Building 5766) to left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

Within compound, from Gate House, looking northwest, Power Plant (Building ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Within compound, from Gate House, looking northwest, Power Plant (Building 5761) to left, Electrical Substation (Building 5770) and Supply Warehouse (Building 5768) center, Satellite Communications Terminal (Building 5771) to far left - Beale Air Force Base, Perimeter Acquisition Vehicle Entry Phased-Array Warning System, End of Spencer Paul Road, north of Warren Shingle Road (14th Street), Marysville, Yuba County, CA

NDE Technology Development Program for Non-Visual Volumetric Inspection Technology; Sensor Effectiveness Testing Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moran, Traci L.; Larche, Michael R.; Denslow, Kayte M.

The Pacific Northwest National Laboratory (PNNL) located in Richland, Washington, hosted and administered Sensor Effectiveness Testing that allowed four different participants to demonstrate the NDE volumetric inspection technologies that were previously demonstrated during the Technology Screening session. This document provides a Sensor Effectiveness Testing report for the final part of Phase I of a three-phase NDE Technology Development Program designed to identify and mature a system or set of non-visual volumetric NDE technologies for Hanford DST primary liner bottom inspection. Phase I of the program will baseline the performance of current or emerging non-visual volumetric NDE technologies for their abilitymore » to detect and characterize primary liner bottom flaws, and identify candidate technologies for adaptation and maturation for Phase II of the program.« less

L-8: In-Situ Resource Utilization Capabilities

NASA Technical Reports Server (NTRS)

Sanders, Jerry

2016-01-01

We are sharpening our focus on Human Space Flight (HSF) Exploration Beyond Low Earth Orbit. We want to ensure that HSF technologies are ready to take Humans to Mars in the 2030's. Various Roadmaps define the needed technologies. We are attempting to define our activities and dependencies. Our Goal: Get within 8 years of launching humans to Mars (L-8) by 2025. Develop and Mature the technologies and systems needed. Develop and Mature the personnel needed. We need collaborators to make it happen, and we think they can benefit by working with us.

Stay Fit as You Mature

MedlinePlus

... For Reporters Meetings & Workshops Follow Us Home Health Information Weight Management Stay Fit as You Mature Related Topics Section ... at NIDDK Technology Advancement & Transfer Meetings & Workshops Health Information ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...

Advanced UVOIR Mirror Technology Development (AMTD) for Very Large Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Smith, W. Scott; Mosier, Gary; Abplanalp, Laura; Arnold, William

2014-01-01

ASTRO2010 Decadal stated that an advanced large-aperture ultraviolet, optical, near-infrared (UVOIR) telescope is required to enable the next generation of compelling astrophysics and exoplanet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. AMTD builds on the state of art (SOA) defined by over 30 years of monolithic & segmented ground & space-telescope mirror technology to mature six key technologies. AMTD is deliberately pursuing multiple design paths to provide the science community with op-tions to enable either large aperture monolithic or segmented mirrors with clear engineering metrics traceable to science requirements.

Overview and Recent Accomplishments of Advanced Mirror Technology Development (AMTD) for Very Large Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2013-01-01

AMTD uses a science-driven systems engineering approach to define & execute a long-term strategy to mature technologies necessary to enable future large aperture space telescopes. Because we cannot predict the future, we are pursuing multiple technology paths including monolithic & segmented mirrors. Assembled outstanding team from academia, industry & government; experts in science & space telescope engineering. Derived engineering specifications from science measurement needs & implementation constraints. Maturing 6 critical technologies required to enable 4 to 8 meter UVOIR space telescope mirror assemblies for both general astrophysics & ultra-high contrast exoplanet imaging. AMTD achieving all its goals & accomplishing all its milestones.

Technology readiness levels for advanced nuclear fuels and materials development

DOE PAGES

Carmack, W. J.; Braase, L. A.; Wigeland, R. A.; ...

2016-12-23

The Technology Readiness Level (TRL) process is used to quantitatively assess the maturity of a given technology. It was pioneered by the National Aeronautics and Space Administration (NASA) in the 1980s to develop and deploy new systems for space applications. The process was subsequently adopted by the Department of Defense (DoD) to develop and deploy new technology and systems for defense applications as well as the Department of Energy (DOE) to evaluate the maturity of new technologies in major construction projects. Advanced nuclear fuels and materials development is a critical technology needed for improving the performance and safety of currentmore » and advanced reactors, and ultimately closing the nuclear fuel cycle. Because deployment of new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the advanced fuel development program is very useful as a management, communication and tracking tool. Furthermore, this article provides examples regarding the methods by which TRLs are currently used to assess the maturity of nuclear fuels and materials under development in the DOE Fuel Cycle Research and Development (FCRD) Program within the Advanced Fuels Campaign (AFC).« less

Technology readiness levels for advanced nuclear fuels and materials development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carmack, W. J.; Braase, L. A.; Wigeland, R. A.

The Technology Readiness Level (TRL) process is used to quantitatively assess the maturity of a given technology. It was pioneered by the National Aeronautics and Space Administration (NASA) in the 1980s to develop and deploy new systems for space applications. The process was subsequently adopted by the Department of Defense (DoD) to develop and deploy new technology and systems for defense applications as well as the Department of Energy (DOE) to evaluate the maturity of new technologies in major construction projects. Advanced nuclear fuels and materials development is a critical technology needed for improving the performance and safety of currentmore » and advanced reactors, and ultimately closing the nuclear fuel cycle. Because deployment of new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the advanced fuel development program is very useful as a management, communication and tracking tool. Furthermore, this article provides examples regarding the methods by which TRLs are currently used to assess the maturity of nuclear fuels and materials under development in the DOE Fuel Cycle Research and Development (FCRD) Program within the Advanced Fuels Campaign (AFC).« less

Tomato seeds maturity detection system based on chlorophyll fluorescence

NASA Astrophysics Data System (ADS)

Li, Cuiling; Wang, Xiu; Meng, Zhijun

2016-10-01

Chlorophyll fluorescence intensity can be used as seed maturity and quality evaluation indicator. Chlorophyll fluorescence intensity of seed coats is tested to judge the level of chlorophyll content in seeds, and further to judge the maturity and quality of seeds. This research developed a detection system of tomato seeds maturity based on chlorophyll fluorescence spectrum technology, the system included an excitation light source unit, a fluorescent signal acquisition unit and a data processing unit. The excitation light source unit consisted of two high power LEDs, two radiators and two constant current power supplies, and it was designed to excite chlorophyll fluorescence of tomato seeds. The fluorescent signal acquisition unit was made up of a fluorescence spectrometer, an optical fiber, an optical fiber scaffolds and a narrowband filter. The data processing unit mainly included a computer. Tomato fruits of green ripe stage, discoloration stage, firm ripe stage and full ripe stage were harvested, and their seeds were collected directly. In this research, the developed tomato seeds maturity testing system was used to collect fluorescence spectrums of tomato seeds of different maturities. Principal component analysis (PCA) method was utilized to reduce the dimension of spectral data and extract principal components, and PCA was combined with linear discriminant analysis (LDA) to establish discriminant model of tomato seeds maturity, the discriminant accuracy was greater than 90%. Research results show that using chlorophyll fluorescence spectrum technology is feasible for seeds maturity detection, and the developed tomato seeds maturity testing system has high detection accuracy.

Starting Up a Company in a Mature Market: Wise or Foolish ?

NASA Astrophysics Data System (ADS)

Biberger, Maximilian

SDCmaterials, Inc. (SDC) is a venture backed, mature start up in the automotive sector. Moreover: Catalytic Converters for vehicles and stationary applications. The company has invented and developed environmentally friendly, novel materials as well as material integration techniques for catalytic converters based on a proprietary and patented nanotechnology. Traditionally catalysts require large amounts of PGMs (Platinum Group Metals), more than USD 10B per year, in order to treat vehicle emissions. Due to that, the catalytic converter is the single most expensive piece part in a vehicle. The currently used technologies have served the industry well. However, as emission standards dramatically tighten, particularly in China, the demand for more fuel efficient and Hybrid vehicles increases, this technology begins to start showing limitations as it can meet the aforementioned demands only by increasing the PGM amount per vehicle. This in turn will increase the cost per vehicle and / or reduce margins for the automotive industry, and in addition to that impact the environment negatively. In contrast to existing technologies, the SDC based technology can meet future emission goals by maintaining, or even reducing, the PGM amount required to treat exhaust emissions. This results in tremendous savings for the consumer and the automotive industry, as well as a significantly better stewardship of natural resources and clean manufacturing. In the present paper the pros and cons of starting a nanotechnology company in a mature market are presented. Both from a business & economics, as well as from a technology point of view. The case is made that it is possible to start a company in a mature market and that novel technologies can compete economically with 40+ old year technologies.

Space Solar Power Technology Demonstration for Lunar Polar Applications: Laser-Photovoltaic Wireless Power Transmission

NASA Technical Reports Server (NTRS)

Henley, M. W.; Fikes, J. C.; Howell, J.; Mankins, J. C.; Howell, Joe T. (Technical Monitor)

2002-01-01

Space Solar Power technology offers unique benefits for near-term NASA space science missions, which can mature this technology for other future applications. "Laser-Photo-Voltaic Wireless Power Transmission" (Laser-PV WPT) is a technology that uses a laser to beam power to a photovoltaic receiver, which converts the laser's light into electricity. Future Laser-PV WPT systems may beam power from Earth to satellites or large Space Solar Power satellites may beam power to Earth, perhaps supplementing terrestrial solar photo-voltaic receivers. In a near-term scientific mission to the moon, Laser-PV WPT can enable robotic operations in permanently shadowed lunar polar craters, which may contain ice. Ground-based technology demonstrations are proceeding, to mature the technology for this initial application, in the moon's polar regions.

A Fast Technology Infusion Model for Aerospace Organizations

NASA Technical Reports Server (NTRS)

Shapiro, Andrew A.; Schone, Harald; Brinza, David E.; Garrett, Henry B.; Feather, Martin S.

2006-01-01

A multi-year Fast Technology Infusion initiative proposes a model for aerospace organizations to improve the cost-effectiveness by which they mature new, in-house developed software and hardware technologies for space mission use. The first year task under the umbrella of this initiative will provide the framework to demonstrate and document the fast infusion process. The viability of this approach will be demonstrated on two technologies developed in prior years with internal Jet Propulsion Laboratory (JPL) funding. One hardware technology and one software technology were selected for maturation within one calendar year or less. The overall objective is to achieve cost and time savings in the qualification of technologies. At the end of the recommended three-year effort, we will have demonstrated for six or more in-house developed technologies a clear path to insertion using a documented process that permits adaptation to a broad range of hardware and software projects.

Next Generation Launch Technology Program Lessons Learned

NASA Technical Reports Server (NTRS)

Cook, Stephen; Tyson, Richard

2005-01-01

In November 2002, NASA revised its Integrated Space Transportation Plan (ISTP) to evolve the Space Launch Initiative (SLI) to serve as a theme for two emerging programs. The first of these, the Orbital Space Plane (OSP), was intended to provide crew-escape and crew-transfer functions for the ISS. The second, the NGLT Program, developed technologies needed for safe, routine space access for scientific exploration, commerce, and national defense. The NGLT Program was comprised of 12 projects, ranging from fundamental high-temperature materials research to full-scale engine system developments (turbine and rocket) to scramjet flight test. The Program included technology advancement activities with a broad range of objectives, ultimate applications/timeframes, and technology maturity levels. An over-arching Systems Engineering and Analysis (SE&A) approach was employed to focus technology advancements according to a common set of requirements. Investments were categorized into three segments of technology maturation: propulsion technologies, launch systems technologies, and SE&A.

Changes in primary metabolites and polyphenols in the peel of "Braeburn" apples (Malus domestica Borkh.) during advanced maturation.

PubMed

Bizjak, Jan; Mikulic-Petkovsek, Maja; Stampar, Franci; Veberic, Robert

2013-10-30

During the two growing seasons the evolution of primary metabolites and wide range of polyphenols in the "Braeburn" apple peel during advanced maturation were investigated. During the five weeks sucrose significantly increased, whereas fructose and glucose fluctuated around the same level in one season and decreased in another. Regarding malic and citric acids, an expected decrease was recorded. The concentrations of hydroxycinnamic acids, dihydrochalcones, and flavanols remained quite constant or slightly decreased during advanced apple ripening. On the contrary an intensive accumulation of quercetin glycosides and anthocyanins took place during this period, starting with the onset of rapid formation approximately 3 weeks before the technological maturity of apples. Total phenolic content was relatively constant or slightly increased. The present results suggest that measures designed to improve the apple color and quality of "Braeburn" apples should be performed approximately 3-4 weeks before the expected technological maturity of apples.

Electronegative Gas Thruster

NASA Technical Reports Server (NTRS)

Dankanich, John; Polzin, Kurt; Walker, Mitchell

2015-01-01

The project is an international collaboration and academic partnership to mature an innovative electric propulsion thruster concept to Technology Research Level-3 (TRL-3) through direct thrust measurement. The project includes application assessment of the technology ranging from small spacecraft to high power. The Plasma propulsion with Electronegative GASES(PEGASES) basic proof of concept has been matured to TRL-2 by Ane Aanesland of Laboratoire de Physique des Plasma at Ecole Polytechnique. The concept has advantages through eliminating the neutralizer requirement and should yield longer life and lower cost over conventional gridded ion engines. The objective of this research is to validate the proof of concept through the first direct thrust measurements and mature the concept to TRL-3.

Hospital Corpsman 3 + 2. Revision

DTIC Science & Technology

1981-01-01

scorpion of ) medical importance is the type called Cen-- truroides sculpturatus found in Mexico and cer- BRW-ELS tain areas of the American Southwest...Endemic centers medical officer’s supervision, exist in mountainous regions of Mexico , Central N and South America, th Bakn,.atr 1. Preventive measures...34’ CHICKENPOX-HERPES ZOSTER ( VARICELLA -SHINGLES) TREATMENT. Symptomatic treatment is normally all that is necessary. Wet compresses M. Chickenpox is an

4. EXTERIOR OF SOUTH END OF BUILDING 105 SHOWING TALL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. EXTERIOR OF SOUTH END OF BUILDING 105 SHOWING TALL RUSTIC STYLE CHIMNEY WITH GABLE FRAME, METAL ROOF, AND CONCRETE WALKWAY AND STEP TO OPEN SIDE-ENTRY DOOR AT PHOTO ENTER. ORIGINAL DECORATIVE WOOD SHIPLAP SIDING ON UPPER END GABLE HAS BEEN COVERED WITH ASPHALT SHINGLES. VIEW TO NORTH. - Rush Creek Hydroelectric System, Worker Cottage, Rush Creek, June Lake, Mono County, CA

1. Perspective view from northeast of former Surgeon's Quarters. This ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Perspective view from northeast of former Surgeon's Quarters. This duplex structure also housed the Secretary and was built in 1887. It is attributed to architect Henry C. Koch, due to the similarity between this Shingle Style house and his contemporary design for the Soldiers' Home Chapel. - National Home for Disabled Volunteer Soldiers, Northwestern Branch, Surgeon's Quarters, 5000 West National Avenue, Milwaukee, Milwaukee County, WI

Stone Quarries and Sourcing in the Carolina Slate Belt

DTIC Science & Technology

2006-04-01

a hilltop with a localized outcrop of small boulders of andesite porphyry . A revisit revealed that the site had recently been destroyed by...rocks are dacitic and include flows, tuffs, breccias, and porphyries . Metasedimentary rocks are metamudstone and fine metasandstone. The Uwharrie...Rocks of this zone, from Shingle Trap, Hattaway, and Sugarloaf Mountains, are mainly light to dark gray metadacite porphyry or metadacitic

Patterns of tree species diversity and composition in old-field successional forests in central Illinois

Treesearch

Scott M. Bretthauer; George Z. Gertner; Gary L. Rolfe; Jeffery O. Dawson

2003-01-01

Tree species diversity increases and dominance decreases with proximity to forest border in two 60-year-old successional forest stands developed on abandoned agricultural land in Piatt County, Illinois. A regression equation allowed us to quantify an increase in diversity with closeness to forest border for one of the forest stands. Shingle oak is the most dominant...

Female Head Athletic Trainers in NCAA Division I (IA Football) Athletics: How They Made It to the Top

ERIC Educational Resources Information Center

Gorant, JoAnne

2012-01-01

The profession of athletic training has opened its doors to women, who now slightly outnumber men in the profession (Shingles, 2001; WATC, 1997, 2005). Unfortunately, this representation does not carry over into positions of high rank. The purpose of this qualitative study was to examine the lived experiences of female head athletic trainers in…

Development of a Risk-Based Comparison Methodology of Carbon Capture Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engel, David W.; Dalton, Angela C.; Dale, Crystal

2014-06-01

Given the varying degrees of maturity among existing carbon capture (CC) technology alternatives, an understanding of the inherent technical and financial risk and uncertainty associated with these competing technologies is requisite to the success of carbon capture as a viable solution to the greenhouse gas emission challenge. The availability of tools and capabilities to conduct rigorous, risk–based technology comparisons is thus highly desirable for directing valuable resources toward the technology option(s) with a high return on investment, superior carbon capture performance, and minimum risk. To address this research need, we introduce a novel risk-based technology comparison method supported by anmore » integrated multi-domain risk model set to estimate risks related to technological maturity, technical performance, and profitability. Through a comparison between solid sorbent and liquid solvent systems, we illustrate the feasibility of estimating risk and quantifying uncertainty in a single domain (modular analytical capability) as well as across multiple risk dimensions (coupled analytical capability) for comparison. This method brings technological maturity and performance to bear on profitability projections, and carries risk and uncertainty modeling across domains via inter-model sharing of parameters, distributions, and input/output. The integration of the models facilitates multidimensional technology comparisons within a common probabilistic risk analysis framework. This approach and model set can equip potential technology adopters with the necessary computational capabilities to make risk-informed decisions about CC technology investment. The method and modeling effort can also be extended to other industries where robust tools and analytical capabilities are currently lacking for evaluating nascent technologies.« less

L-8: Non-Venting Thermal Control Systems for Space Vehicles: Boilerplate

NASA Technical Reports Server (NTRS)

Smith, Fred; Massina, Chris

2016-01-01

We are sharpening our focus on Human Space Flight (HSF) Exploration Beyond Low Earth Orbit. We want to ensure that HSF technologies are ready to take Humans to Mars in the 2030's. Various Roadmaps define the needed technologies. We are attempting to define our activities and dependencies. Our Goal: Get within 8 years of launching humans to Mars (L-8) by 2025. Develop and Mature the technologies and systems needed. Develop and Mature the personnel needed. We need collaborators to make it happen, and we think they can benefit by working with us.

Technology Readiness Level Guidebook

DOT National Transportation Integrated Search

2017-09-01

This guidebook provides the necessary information for conducting a Technology Readiness Level (TRL) Assessment. TRL Assessments are a tool for determining the maturity of technologies and identifying next steps in the research process. This guidebook...

NASA space research and technology overview (ITP)

NASA Technical Reports Server (NTRS)

Reck, Gregory M.

1992-01-01

A series of viewgraphs summarizing NASA space research and technology is presented. Some of the specific topics covered include the organization and goals of the Office of Aeronautics and Space Technology, technology maturation strategy, integrated technology plan for the Civil Space Program, program selection and investment prioritization, and space technology benefits.

Experimentation for the Maturation of Deep Space Cryogenic Refueling Technologies

NASA Technical Reports Server (NTRS)

Chato, David J.

2008-01-01

This report describes the results of the "Experimentation for the Maturation of Deep Space Cryogenic Refueling Technology" study. This study identifies cryogenic fluid management technologies that require low-gravity flight experiments bring technology readiness levels to 5 to 6; examines many possible flight experiment options; and develops near-term low-cost flight experiment concepts to mature the core technologies. A total of 25 white papers were prepared by members of the project team in the course of this study. The full text of each white paper is included and 89 relevant references are cited. The team reviewed the white papers that provided information on new or active concepts of experiments to pursue and assessed them on the basis of technical need, cost, return on investment, and flight platform. Based on on this assessment the "Centaur Test Bed for Cryogenic Fluid Management" was rated the highest. "Computational Opportunities for Cryogenics for Cryogenic and Low-g Fluid Systems" was ranked second, based on its high scores in state of the art and return on investment, even though scores in cost and time were second to last. "Flight Development Test Objective Approach for In-space Propulsion Elements" was ranked third.

Rapid Maturation of Edge Sensor Technology and Potential Application in Large Space Telescopes with Segmented Primary Mirrors

NASA Technical Reports Server (NTRS)

Montgomery, Edward E., IV; Smith, W. Scott (Technical Monitor)

2002-01-01

This paper explores the history and results of the last two year's efforts to transition inductive edge sensor technology from Technology Readiness Level 2 to Technology Readiness Level 6. Both technical and programmatic challenges were overcome in the design, fabrication, test, and installation of over a thousand sensors making up the Segment Alignment Maintenance System (SAMs) for the 91 segment, 9.2-meter. Hobby Eberly Telescope (HET). The integration of these sensors with the control system will be discussed along with serendipitous leverage they provided for both initialization alignment and operational maintenance. The experience gained important insights into the fundamental motion mechanics of large segmented mirrors, the relative importance of the variance sources of misalignment errors, the efficient conduct of a program to mature the technology to the higher levels. Unanticipated factors required the team to develop new implementation strategies for the edge sensor information which enabled major segmented mirror controller design simplifications. The resulting increase in the science efficiency of HET will be shown. Finally, the on-going effort to complete the maturation of inductive edge sensor by delivering space qualified versions for future IR (infrared radiation) space telescopes.

Laser-based standoff detection of explosives: a critical review.

PubMed

Wallin, Sara; Pettersson, Anna; Ostmark, Henric; Hobro, Alison

2009-09-01

A review of standoff detection technologies for explosives has been made. The review is focused on trace detection methods (methods aiming to detect traces from handling explosives or the vapours surrounding an explosive charge due to the vapour pressure of the explosive) rather than bulk detection methods (methods aiming to detect the bulk explosive charge). The requirements for standoff detection technologies are discussed. The technologies discussed are mostly laser-based trace detection technologies, such as laser-induced-breakdown spectroscopy, Raman spectroscopy, laser-induced-fluorescence spectroscopy and IR spectroscopy but the bulk detection technologies millimetre wave imaging and terahertz spectroscopy are also discussed as a complement to the laser-based methods. The review includes novel techniques, not yet tested in realistic environments, more mature technologies which have been tested outdoors in realistic environments as well as the most mature millimetre wave imaging technique.

Ensuring sustainability of non-networked sanitation technologies: an approach to standardization.

PubMed

Starkl, Markus; Brunner, Norbert; Feil, Magdalena; Hauser, Andreas

2015-06-02

Non-networked sanitation technologies use no sewer, water or electricity lines. Based on a review of 45 commercially distributed technologies, 12 (representing three concepts) were selected for a detailed audit. They were located in six countries of Africa and Asia. The safety of users was generally assured and the costs per use were not excessive, whereas costs were fully transparent for only one technology surveyed. A main drawback was insufficient quality of the byproducts from on-site treatment, making recycling in agriculture a hygienic and environmental risk. Further, no technology was sufficiently mature (requiring e.g. to shift wastes by hand). In order to promote further development and give producers of mature products a competitive advantage, the paper proposes a certification of technologies to confirm the fulfillment of basic requirements to make them attractive for future users.

An innovative approach to predict technology evolution for the desoldering of printed circuit boards: A perspective from China and America.

PubMed

Wang, Chen; Zhao, Wu; Wang, Jie; Chen, Ling; Luo, Chun-Jing

2016-06-01

The printed circuit boards basis of electronic equipment have seen a rapid growth in recent years and played a significant role in modern life. Nowadays, the fact that electronic devices upgrade quickly necessitates a proper management of waste printed circuit boards. Non-destructive desoldering of waste printed circuit boards becomes the first and the most crucial step towards recycling electronic components. Owing to the diversity of materials and components, the separation process is difficult, which results in complex and expensive recovery of precious materials and electronic components from waste printed circuit boards. To cope with this problem, we proposed an innovative approach integrating Theory of Inventive Problem Solving (TRIZ) evolution theory and technology maturity mapping system to forecast the evolution trends of desoldering technology of waste printed circuit boards. This approach can be applied to analyse the technology evolution, as well as desoldering technology evolution, then research and development strategy and evolution laws can be recommended. As an example, the maturity of desoldering technology is analysed with a technology maturity mapping system model. What is more, desoldering methods in different stages are analysed and compared. According to the analysis, the technological evolution trends are predicted to be 'the law of energy conductivity' and 'increasing the degree of idealisation'. And the potential technology and evolutionary state of waste printed circuit boards are predicted, offering reference for future waste printed circuit boards recycling. © The Author(s) 2016.

Development Challenges of Game-Changing Entry System Technologies From Concept to Mission Infusion

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Beck, Robin; Ellerby, Don; Feldman, Jay; Gage, Peter; Munk, Michelle; Wercinski, Paul

2016-01-01

Realization within the US and NASA that future exploration both Human and Robotic will require innovative new technologies led to the creation of the Space Technology Mission Directorate and investment in game changing technologies with high pay-off. Some of these investments will see success and others, due to many of the constraints, will not attain their goal. The co-authors of this proposed presentation have been involved from concept to mission infusion aspects of entry technologies that are game changing. The four example technologies used to describe the challenges experienced along the pathways to success are at different levels of maturity. They are Conformal, 3-D MAT, HEEET and ADEPT. The four examples in many ways capture broad aspects of the challenges of maturation and illustrate what led some to be exceptionally successful and how others had to be altered in order remain viable game changing technologies.

Overview of Stirling Technology Research at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

2016-01-01

Stirling Radioisotope Power Systems (RPSs) are under development to provide power on future space science missions where robotic spacecraft will orbit, fly by, land, or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. NASA Glenn Research Center's newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability and system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

Overview of Stirling Technology Research at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

2015-01-01

Stirling Radioisotope Power Systems (RPS) are under development to provide power on future space science missions where robotic spacecraft will orbit, flyby, land or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. Glenn Research Center's (GRC's) newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability or system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

The Need for Technology Maturity of Any Advanced Capability to Achieve Better Life Cycle Cost (LCC)

NASA Technical Reports Server (NTRS)

Robinson, John W.; Levack, Daniel J. H.; Rhodes, Russel E.; Chen, Timothy T.

2009-01-01

Programs such as space transportation systems are developed and deployed only rarely, and they have long development schedules and large development and life cycle costs (LCC). They have not historically had their LCC predicted well and have only had an effort to control the DDT&E phase of the programs. One of the factors driving the predictability, and thus control, of the LCC of a program is the maturity of the technologies incorporated in the program. If the technologies incorporated are less mature (as measured by their Technology Readiness Level - TRL), then the LCC not only increases but the degree of increase is difficult to predict. Consequently, new programs avoid incorporating technologies unless they are quite mature, generally TRL greater than or equal to 7 (system prototype demonstrated in a space environment) to allow better predictability of the DDT&E phase costs unless there is no alternative. On the other hand, technology development programs rarely develop technologies beyond TRL 6 (system/subsystem model or prototype demonstrated in a relevant environment). Currently the lack of development funds beyond TRL 6 and the major funding required for full scale development leave little or no funding available to prototype TRL 6 concepts so that hardware would be in the ready mode for safe, reliable and cost effective incorporation. The net effect is that each new program either incorporates little new technology or has longer development schedules and costs, and higher LCC, than planned. This paper presents methods to ensure that advanced technologies are incorporated into future programs while providing a greater accuracy of predicting their LCC. One method is having a dedicated organization to develop X-series vehicles or separate prototypes carried on other vehicles. The question of whether such an organization should be independent of NASA and/or have an independent funding source is discussed. Other methods are also discussed. How to make the choice of which technologies to pursue to the prototype level is also discussed since, to achieve better LCC, first the selection of the appropriate technologies.

Exploration Systems Health Management Facilities and Testbed Workshop

NASA Technical Reports Server (NTRS)

Wilson, Scott; Waterman, Robert; McCleskey, Carey

2004-01-01

Presentation Agenda : (1) Technology Maturation Pipeline (The Plan) (2) Cryogenic testbed (and other KSC Labs) (2a) Component / Subsystem technologies (3) Advanced Technology Development Center (ATDC) (3a) System / Vehic1e technologies (4) EL V Flight Experiments (Flight Testbeds).

Antibody VH and VL recombination using phage and ribosome display technologies reveals distinct structural routes to affinity improvements with VH-VL interface residues providing important structural diversity

PubMed Central

Groves, Maria AT; Amanuel, Lily; Campbell, Jamie I; Rees, D Gareth; Sridharan, Sudharsan; Finch, Donna K; Lowe, David C; Vaughan, Tristan J

2014-01-01

In vitro selection technologies are an important means of affinity maturing antibodies to generate the optimal therapeutic profile for a particular disease target. Here, we describe the isolation of a parent antibody, KENB061 using phage display and solution phase selections with soluble biotinylated human IL-1R1. KENB061 was affinity matured using phage display and targeted mutagenesis of VH and VL CDR3 using NNS randomization. Affinity matured VHCDR3 and VLCDR3 library blocks were recombined and selected using phage and ribosome display protocol. A direct comparison of the phage and ribosome display antibodies generated was made to determine their functional characteristics. PMID:24256948

Photovoltaic sheathing element with one or more tabs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keenihan, James R; Langmaid, Joseph A; Lopez, Leonardo C.

2017-02-07

The present invention is premised upon an assembly that includes at least a photovoltaic sheathing element capable of being affixed on a building structure. The shingle including at least a photovoltaic cell assembly, a body portion attached to one or more portions of the photovoltaic cell assembly. Wherein the body portion includes one or more top peripheral tabs each capable of fitting under one or more vertically adjoining devices.

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This case study describes a DOE Zero Energy Ready Home in Old Greenwich, CT, that scored HERS 40 without PV and HERS 27 with PV. This 4,100 ft2 custom home has 13-inch ICF basement walls and 11-inch ICF above-grade walls with a closed-cell spray foam-insulated roof deck, and a continuously running ERV. The house has a dual-fuel heat pump, an instantaneous condensing water heater, and 4.5-kW solar shingles.

Mars base technology program overview

NASA Technical Reports Server (NTRS)

Chu, Chneg-Chih; Hayati, Samad A.; Udomkesmalee, Suraphol

2005-01-01

In this paper, we present an overview of the current technology portfolio for Mars Base Technology Program. Brief descriptions of the awarded technologies and the high-priority areas in both NRAs are provided to show the current focus of MTP. We also present the approach that MTP uses to evaluate technology maturity for each of the technology tasks.

Development Challenges of Game-Changing Entry System Technologies from Concept to Mission Infusion

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Beck, Robin; Ellerby, Don; Feldman, Jay; Gage, Peter; Munk, Michelle; Wercinski, Paul

2015-01-01

Realization within the US and NASA that future exploration both Human and Robotic will require innovative new technologies led to the creation of the Space Technology Mission Directorate and investment in game changing technologies with high pay-off. Some of these investments will see success and others, due to many of the constraints, will not attain their goal. The co-authors of this proposed presentation have been involved from concept to mission infusion aspects of entry technologies that are game changing. The four example technologies used to describe the challenges experienced along the pathways to success are at different levels of maturity. They are Conformal, 3-D MAT, HEEET and ADEPT. The four examples in many ways capture broad aspects of the challenges of maturation and illustrate what led some to be exceptionally successful and how others had to be altered in order remain viable game changing technologies. Subsystem technologies for robotic and human missions?

System Level Aerothermal Testing for the Adaptive Deployable Entry and Placement Technology (ADEPT)

NASA Technical Reports Server (NTRS)

Cassell, Alan; Gorbunov, Sergey; Yount, Bryan; Prabhu, Dinesh; de Jong, Maxim; Boghozian, Tane; Hui, Frank; Chen, Y.-K.; Kruger, Carl; Poteet, Carl;

Advanced Mirror Technology Development

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2017-01-01

The Advanced Mirror Technology Development (AMTD) project matures critical technologies required to enable ultra-stable 4-m-or-larger monolithic or segmented ultraviolet, optical, and infrared (UVOIR) space telescope primary-mirror assemblies for general astrophysics and ultra-high-contrast observations of exoplanets.

The Importance of Technology Readiness in NASA Earth Venture Missions

NASA Technical Reports Server (NTRS)

Wells, James E.; Komar, George J.

2009-01-01

The first set of Venture-class investigations share the characteristic that the technology should be mature and all investigations must use mature technology that has been modeled or demonstrated in a relevant environment (Technology Readiness Level (TRL) >5). Technology Readiness Levels are a systematic metric/measurement system that supports assessments of the maturity of a particular technology and the consistent comparison of maturity between different types of technology. The TRL is used in NASA technology planning. A major step in the level of fidelity of the technology demonstration follows the completion of TRL 5. At TRL 6, a system or subsystem model or prototype must be demonstrated in a relevant environment (ground or space) representative model or prototype system or system, which would go well beyond ad hoc, "patch-cord," or discrete component level breadboarding. These TRL levels are chosen as target objectives for the Program. The challenge for offerors is that they must identify key aspects (uncertainty, multi subsystem complexity, etc) of the TRL estimate that should be properly explained in a submitted proposal. Risk minimization is a key component of the Earth Venture missions. Experiences of prior airborne missions will be shared. The discussion will address aspects of uncertainty and issues surrounding three areas of airborne earth science missions: (1) Aircraft or proposed flight platform -- Expressing the capability of the aircraft in terms of the supporting mission requirements. These issues include airplane performance characteristics (duration, range, altitude, among others) and multiship complexities. (2) Instruments -- Establishing that the instruments have been demonstrated in a relevant environment. Instruments with heritage in prior space missions meet this requirement, as do instruments tested on the ground. Evidence that the instruments have demonstrated the ability to collect data as advertised will be described. The complexity of the integration of multiple subsystems will also be addressed. Issues associated with tailoring the instrument to meet the specific Venture mission objectives must be thoroughly explained and justified. (3) Aircraft/Instrument Integration -- Explicitly defining what development may be required to harden the instrument and integrate the instrument. The challenges associated with this key aspect of major airborne earth science investigations will be presented.

IT infusion

NASA Technical Reports Server (NTRS)

Feather, M. S.

2002-01-01

Infusing IT technology is a perennial challenge. The Technology Infusion and Maturity Assessment approach of Cornford & Hicks is shown applied to an example of IT infusion: moedl-based V&V of spacecraft software.

A Technology Development Roadmap for a Near-Term Probe-Class X-ray Astrophysics Mission

NASA Technical Reports Server (NTRS)

Daelemans, Gerard J.; Petre, Robert; Bookbinder, Jay; Ptak, Andrew; Smith, Randall

2013-01-01

This document presents a roadmap, including proposed budget and schedule, for maturing the instrumentation needed for an X-ray astrophysics Probe-class mission. The Physics of the Cosmos (PCOS) Program Office was directed to create this roadmap following the December 2012 NASA Astrophysics Implementation Plan (AIP). Definition of this mission is called for in the AIP, with the possibility of selection in 2015 for a start in 2017. The overall mission capabilities and instrument performance requirements were defined in the 2010 Astronomy and Astrophysics Decadal Survey report, New Worlds, New Horizons in Astronomy and Astrophysics (NWNH), in connection with the highly ranked International X-ray Observatory (IXO). In NWNH, recommendations were provided regarding the size of, and instrumentation needed by, the next large X-ray observatory. Specifically, the key instrumental capability would be an X-ray calorimeter spectrometer at the focus of a large mirror with angular resolution of 10 arc seconds (arcsec) or better. If possible, a grating spectrometer should also be incorporated into the instrument complement. In response to these recommendations, four instrumentation technologies are included in this roadmap. Three of these are critical for an X-ray mission designed to address NWNH questions: segmented X-ray mirrors, transition edge sensor calorimeters, and gratings. Two approaches are described for gratings, which represent the least mature technology and thus most in need of a parallel path for risk reduction. Also, while current CCD detectors would likely meet the mission needs for grating spectrum readout, specific improvements are included as an additional approach for achieving the grating system effective area requirement. The technical steps needed for these technologies to attain technology readiness levels (TRL) of 5 and 6 are described, as well as desirable modest risk reduction steps beyond TRL-6. All of the technology development efforts are currently funded through the NASA Physics of the Cosmos (PCOS) Strategic Astrophysics Technology (SAT) program; some through the end of FY13, others though FY14. These technology needs are those identified as critical for a near-term mission and briefly described in the 2012 NASA X-ray Mission Concepts Study. This Technology Development Roadmap (TDR) provides a more complete description of each, updates the status, and describes the steps to mature them. For each technology, a roadmap is presented for attaining TRL-6 by 2020 at the latest, and 2018 for most. The funding required for each technology to attain TRL-5 and TRL-6 is presented and justified through a description of the steps needing completion. The total funding required for these technologies to reach TRL-6 is relatively modest, and is consistent with the planned PCOS SAT funding over the next several years. The approximate annual cost through 2018 is $8M. The total cost for all technologies to be matured is $62M (including funding already awarded for FY13 and FY14). This can be contrasted to the $180M recommended by NWNH for technology development for IXO, primarily for the maturation of the mirror technology. The technology described in Section 3 of this document is exclusively that needed for a near-term Probe-class mission, to start in 2017, or for a mission that can be recommended by the next Decadal survey committee for an immediate start. It is important to note that there are other critical X-ray instrumentation technologies under development that are less mature than the ones discussed here, but are essential for a major X-ray mission that might start in the late 2020s. These technologies, described briefly in Section 4, are more appropriately funded through the Astronomy and Physics Research and Analysis (APRA) program.

Visualization and quantitation of abundant macroautophagy in virus-infected cells by confocal three-dimensional fluorescence imaging.

PubMed

Jackson, Wallen; Yamada, Masaki; Moninger, Thomas; Grose, Charles

2013-10-01

Varicella-zoster virus (VZV) is a human herpesvirus. Primary infection causes varicella (chickenpox), a viremic illness typified by an exanthem consisting of several hundred vesicles. When VZV reactivates from latency in the spinal ganglia during late adulthood, the emerging virus causes a vesicular dermatomal rash (herpes zoster or shingles). To expand investigations of autophagy during varicella and zoster, newer 3D imaging technology was combined with laser scanning confocal microscopy to provide animations of autophagosomes in the vesicular rash. First, the cells were immunolabeled with antibodies against VZV proteins and the LC3 protein, an integral autophagosomal protein. Antibody reagents lacking activity against the human blood group A1 antigen were selected. After laser excitation of the samples, optimized emission detection bandwidths were configured by Zeiss Zen control software. Confocal Z-stacks comprising up to 40 optical slices were reconstructed into 3D animations with the aid of Imaris software. With this imaging technology, individual autophagosomes were clearly detectable as spheres within each vesicular cell. To enumerate the number of autophagosomes, data sets from 50 cells were reconstructed as 3D fluorescence images and analyzed with MeasurementPro software. The mean number of autophagosomes per infected vesicular cell was >100, although over 200 autophagosomes were seen in a few cells. In summary, macroautophagy was easily quantitated within VZV-infected cells after immunolabeling and imaging by 3D confocal animation technology. These same 3D imaging techniques will be applicable for investigations of autophagy in other virus-infected cells. Copyright © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

Research and Technology Activities Supporting Closed-Brayton-Cycle Power Conversion System Development

NASA Technical Reports Server (NTRS)

Barrett, Michael J.

2004-01-01

The elements of Brayton technology development emphasize power conversion system risk mitigation. Risk mitigation is achieved by demonstrating system integration feasibility, subsystem/component life capability (particularly in the context of material creep) and overall spacecraft mass reduction. Closed-Brayton-cycle (CBC) power conversion technology is viewed as relatively mature. At the 2-kWe power level, a CBC conversion system Technology Readiness Level (TRL) of six (6) was achieved during the Solar Dynamic Ground Test Demonstration (SD-GTD) in 1998. A TRL 5 was demonstrated for 10 kWe-class CBC components during the development of the Brayton Rotating Unit (BRU) from 1968 to 1976. Components currently in terrestrial (open cycle) Brayton machines represent TRL 4 for similar uses in 100 kWe-class CBC space systems. Because of the baseline component and subsystem technology maturity, much of the Brayton technology task is focused on issues related to systems integration. A brief description of ongoing technology activities is given.

Access from Space: A New Perspective on NASA's Space Transportation Technology Requirements and Opportunities

NASA Technical Reports Server (NTRS)

Rasky, Daniel J.

2004-01-01

The need for robust and reliable access from space is clearly demonstrated by the recent loss of the Space Shuttle Columbia; as well as the NASA s goals to get the Shuttle re-flying and extend its life, build new vehicles for space access, produce successful robotic landers and s a q k retrr? llisrions, and maximize the science content of ambitious outer planets missions that contain nuclear reactors which must be safe for re-entry after possible launch aborts. The technology lynch pin of access from space is hypersonic entry systems such the thermal protection system, along with navigation, guidance and control (NG&C). But it also extends to descent and landing systems such as parachutes, airbags and their control systems. Current space access technology maturation programs such as NASA s Next Generation Launch Technology (NGLT) program or the In-Space Propulsion (ISP) program focus on maturing laboratory demonstrated technologies for potential adoption by specific mission applications. A key requirement for these programs success is a suitable queue of innovative technologies and advanced concepts to mature, including mission concepts enabled by innovative, cross cutting technology advancements. When considering space access, propulsion often dominates the capability requirements, as well as the attention and resources. From the perspective of access from space some new cross cutting technology drivers come into view, along with some new capability opportunities. These include new miniature vehicles (micro, nano, and picosats), advanced automated systems (providing autonomous on-orbit inspection or landing site selection), and transformable aeroshells (to maximize capabilities and minimize weight). This paper provides an assessment of the technology drivers needed to meet future access from space mission requirements, along with the mission capabilities that can be envisioned from innovative, cross cutting access from space technology developments.

Integrating Recycled Glass Cullet in Asphalt Roof Shingles to Mitigate Heat Island Effect

DTIC Science & Technology

2014-05-01

polymer, 39.3% bituminous composition, 57.5% trap rock dust stabilizer. Using recycled rubber, the formula is 3.2% elastomeric polymer, 37.2...and then rock or slag granules with similar gradation for the headlap granules. Ideal top surface materials are either igneous or metamorphic ...inherently opaque, and must be resistant to multiple heat-thaw cycles. The granules most widely used are crushed slate, basalt, and trap rock (Pagen

North Carolina's Approach: Developing a Bio-Tech Workforce

ERIC Educational Resources Information Center

Smit, Norman

2004-01-01

States across the country are all chasing what are becoming known as "new-age" technologies. These are technologies such as biotechnology, nanotechnology, bio-informatics and others. These technologies offer the potential for long-term economic growth and well-paid jobs to employees working in these sectors. As these technologies mature,…

Development of a multicriteria assessment model for ranking biomass feedstock collection and transportation systems.

PubMed

Kumar, Amit; Sokhansanj, Shahab; Flynn, Peter C

2006-01-01

This study details multicriteria assessment methodology that integrates economic, social, environmental, and technical factors in order to rank alternatives for biomass collection and transportation systems. Ranking of biomass collection systems is based on cost of delivered biomass, quality of biomass supplied, emissions during collection, energy input to the chain operations, and maturity of supply system technologies. The assessment methodology is used to evaluate alternatives for collecting 1.8 x 10(6) dry t/yr based on assumptions made on performance of various assemblies of biomass collection systems. A proposed collection option using loafer/ stacker was shown to be the best option followed by ensiling and baling. Ranking of biomass transport systems is based on cost of biomass transport, emissions during transport, traffic congestion, and maturity of different technologies. At a capacity of 4 x 10(6) dry t/yr, rail transport was shown to be the best option, followed by truck transport and pipeline transport, respectively. These rankings depend highly on assumed maturity of technologies and scale of utilization. These may change if technologies such as loafing or ensiling (wet storage) methods are proved to be infeasible for large-scale collection systems.

Organizational Resilience and Culture a Model for Information Technology Service Management (ITSM)

ERIC Educational Resources Information Center

Granito, Francis A.

2011-01-01

Organizational change and organizational culture have been studied and written about by many authors, most notably by Edgar Schein (1990, 1992), and are named as critical components of organizational maturity through such industry standards as The Capability Maturity Model Integration (CMMI), Control Objectives for Information and Related…

Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Wercinski, Paul F.; Beck, Robin A. S.; Hamm, Kenneth R.; Yount, Bryan C.; Makino, A.; Smith, B.; Gage, P.; Prabhu, D.

2012-01-01

The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term; (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term; and (3) Heavy mass and human missions to Mars in the long term.

Mechanically-Deployed Hypersonic Decelerator and Conformal Ablator Technologies for Mars Missions

NASA Technical Reports Server (NTRS)

Venkatapathy, E.; Wercinski, P.; Prabhu, D.

2012-01-01

The concept of a mechanically deployable hypersonic decelerator, developed initially for high mass (approximately 40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets. Combined with maturation of conformal ablator technology (another current OCT investment), the two technologies provide unique low-mass mission enabling capabilities otherwise not achievable by current rigid aeroshell or by inflatables. If this abstract is accepted, we will present results that illustrate the mission enabling capabilities of the mechanically deployable architecture for: (1) robotic Mars (Discovery or New Frontiers class) in the near term (2) alternate approaches to landing MSL-class payloads, without the need for supersonic parachute or lifting entry, in the mid-term and (3) Heavy mass and human missions to Mars in the long term.

Modular, Reconfigurable, High-Energy Technology Development

NASA Technical Reports Server (NTRS)

Carrington, Connie; Howell, Joe

2006-01-01

The Modular, Reconfigurable High-Energy (MRHE) Technology Demonstrator project was to have been a series of ground-based demonstrations to mature critical technologies needed for in-space assembly of a highpower high-voltage modular spacecraft in low Earth orbit, enabling the development of future modular solar-powered exploration cargo-transport vehicles and infrastructure. MRHE was a project in the High Energy Space Systems (HESS) Program, within NASA's Exploration Systems Research and Technology (ESR&T) Program. NASA participants included Marshall Space Flight Center (MSFC), the Jet Propulsion Laboratory (JPL), and Glenn Research Center (GRC). Contractor participants were the Boeing Phantom Works in Huntsville, AL, Lockheed Martin Advanced Technology Center in Palo Alto, CA, ENTECH, Inc. in Keller, TX, and the University of AL Huntsville (UAH). MRHE's technical objectives were to mature: (a) lightweight, efficient, high-voltage, radiation-resistant solar power generation (SPG) technologies; (b) innovative, lightweight, efficient thermal management systems; (c) efficient, 100kW-class, high-voltage power delivery systems from an SPG to an electric thruster system; (d) autonomous rendezvous and docking technology for in-space assembly of modular, reconfigurable spacecraft; (e) robotic assembly of modular space systems; and (f) modular, reconfigurable distributed avionics technologies. Maturation of these technologies was to be implemented through a series of increasingly-inclusive laboratory demonstrations that would have integrated and demonstrated two systems-of-systems: (a) the autonomous rendezvous and docking of modular spacecraft with deployable structures, robotic assembly, reconfiguration both during assembly and (b) the development and integration of an advanced thermal heat pipe and a high-voltage power delivery system with a representative lightweight high-voltage SPG array. In addition, an integrated simulation testbed would have been developed containing software models representing the technologies being matured in the laboratory demos. The testbed would have also included models for non-MRHE developed subsystems such as electric propulsion, so that end-to-end performance could have been assessed. This paper presents an overview of the MRHE Phase I activities at MSFC and its contractor partners. One of the major Phase I accomplishments is the assembly demonstration in the Lockheed Martin Advanced Technology Center (LMATC) Robot-Satellite facility, in which three robot-satellites successfully demonstrated rendezvous & docking, self-assembly, reconfiguration, adaptable GN&C, deployment, and interfaces between modules. Phase I technology maturation results from ENTECH include material recommendations for radiation hardened Stretched Lens Array (SLA) concentrator lenses, and a design concept and test results for a hi-voltage PV receiver. UAH's accomplishments include Supertube heatpipe test results, which support estimates of thermal conductivities at 30,000 times that of an equivalent silver rod. MSFC performed systems trades and developed a preliminary concept design for a 100kW-class modular reconfigurable solar electric propulsion transport vehicle, and Boeing Phantom Works in Huntsville performed assembly and rendezvous and docking trades. A concept animation video was produced by SAIC, wllich showed rendezvous and docking and SLA-square-rigger deployment in LEO.

Overview of the NASA Advanced In-Space Propulsion Project

NASA Technical Reports Server (NTRS)

LaPointe, Michael

2011-01-01

In FY11, NASA established the Enabling Technologies Development and Demonstration (ETDD) Program, a follow on to the earlier Exploration Technology Development Program (ETDP) within the NASA Exploration Systems Mission Directorate. Objective: Develop, mature and test enabling technologies for human space exploration.

Geospatial Data Science Analysis | Geospatial Data Science | NREL

Science.gov Websites

different levels of technology maturity. Photo of a man taking field measurements. Geospatial analysis energy for different technologies across the nation? Featured Analysis Products Renewable Energy

Soiling of building envelope surfaces and its effect on solar reflectance. Part I: Analysis of roofing product databases

DOE PAGES

Sleiman, Mohamad; Ban-Weiss, George; Gilbert, Haley E.; ...

2011-12-01

The use of highly reflective “cool” roofing materials can decrease demand for air conditioning, mitigate the urban heat island effect, and potentially slow global warming. However, initially high roof solar reflectance can be degraded by natural soiling and weathering processes. We evaluated solar reflectance losses after three years of natural exposure reported in two separate databases: the Rated Products Directory of the US Cool Roof Rating Council (CRRC) and information reported by manufacturers to the US Environmental Protection Agency (EPA)’s ENERGY STAR® rating program. Many product ratings were culled because they were duplicative (within a database) or not measured. Amore » second, site-resolved version of the CRRC dataset was created by transcribing from paper records the site-specific measurements of aged solar reflectance in Florida, Arizona and Ohio. Products with high initial solar reflectance tended to lose reflectance, while those with very low initial solar reflectance tended to become more reflective as they aged. Within the site-resolved CRRC database, absolute solar reflectance losses for samples of medium-to-high initial solar reflectance were 2 - 3 times greater in Florida (hot and humid) than in Arizona (hot and dry); losses in Ohio (temperate but polluted) were intermediate. Disaggregating results by product type, factory-applied coating, field-applied coating, metal, modified bitumen, shingle, singleply membrane and tile, revealed that absolute solar reflectance losses were largest for fieldapplied coating, modified bitumen and single-ply membrane products, and smallest for factoryapplied coating and metal products.The 2008 Title 24 provisional aged solar reflectance formula overpredicts the measured aged solar reflectance of 0% to 30% of each product type in the culled public CRRC database. The rate of overprediction was greatest for field-applied coating and single-ply membrane products and least for factory-applied coating, shingle, and metal products. New product-specific formulas can be used to estimate provisional aged solar reflectance from initial solar reflectance pending measurement of aged solar reflectance. The appropriate value of soiling resistance varies by product type and is selected to attain some desired overprediction rate for the formula. The correlations for shingle products presented in this paper should not be used to predict aged solar reflectance or estimate provisional aged solar reflectance because the data set is too small and too limited in range of initial solar reflectance.« less

Laminar flow: Challenge and potential

NASA Technical Reports Server (NTRS)

Kirchner, Mark E.

1987-01-01

Commercial air transportation has experienced revolutionary technology advances since WWII. These technology advances have resulted in an explosive growth in passenger traffic. Today, however, many technologies have matured, and maintaining a similar growth rate will be a challenge. A brief history of laminar flow technology and its application to subsonic and supersonic air transportation is presented.

Flight Opportunities: Space Technology Mission Directorate

NASA Technical Reports Server (NTRS)

Van Dijk, Alexander

2016-01-01

Flight Opportunities enables maturation of new space technologies by funding access to commercially available space-relevant test environments. The program also supports capability development in the commercial suborbital and orbital small satellite launcher markets.

Development Status of the International Space Station Urine Processor Assembly

NASA Technical Reports Server (NTRS)

Holder, Donald W.; Hutchens, Cindy F.

2003-01-01

NASA, Marshall Space Flight Center (MSFC) is developing a Urine Processor Assembly (UPA) for the International Space Station (ISS). The UPA uses Vapor Compression Distillation (VCD) technology to reclaim water from pre-treated urine. This water is further processed by the Water Processor Assembly (WPA) to potable quality standards for use on the ISS. NASA has developed this technology over the last 25-30 years. Over this history, many technical issues were solved with thousands of hours of ground testing that demonstrate the ability of the UPA technology to reclaim water from urine. In recent years, NASA MSFC has been responsible for taking the UPA technology to "flight design" maturity. This paper will give a brief overview of the UPA design and a status of the major design and development efforts completed recently to mature the UPA to a flight level.

Cobalt: Development and Maturation of GN&C Technologies for Precision Landing

NASA Technical Reports Server (NTRS)

Carson, John M.; Restrepo, Carolina; Seubert, Carl; Amzajerdian, Farzin

2016-01-01

The CoOperative Blending of Autonomous Landing Technologies (COBALT) instrument is a terrestrial test platform for development and maturation of guidance, navigation and control (GN&C) technologies for precision landing. The project is developing a third-generation Langley Research Center (LaRC) navigation doppler lidar (NDL) for ultra-precise velocity and range measurements, which will be integrated and tested with the Jet Propulsion Laboratory (JPL) lander vision system (LVS) for terrain relative navigation (TRN) position estimates. These technologies together provide precise navigation knowledge that is critical for a controlled and precise touchdown. The COBALT hardware will be integrated in 2017 into the GN&C subsystem of the Xodiac rocket-propulsive vertical test bed (VTB) developed by Masten Space Systems, and two terrestrial flight campaigns will be conducted: one open-loop (i.e., passive) and one closed-loop (i.e., active).

48. REMOVAL OF FIRST TRUSS. The first truss removed here ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

48. REMOVAL OF FIRST TRUSS. The first truss removed here rests on ground plates and awaits the similar placement of all the trusses for temporary storage. In the foreground are cut out sections of roofing also removed by crane. Note the 1873-74 standing seam sheet metal roof above the 1851 shingling. The roof pole gutters were in part made up of bench back rails. - Twelfth Street Meeting House, 20 South Twelfth Street, Philadelphia, Philadelphia County, PA

Declining incidence of chickenpox in the absence of universal childhood immunisation

PubMed Central

Lowe, G; Salmon, R; Thomas, D; Evans, M

2004-01-01

Objective: To examine the epidemiology of chickenpox in Wales from 1986 to 2001. Design: Descriptive analysis of chickenpox consultations reported by the Welsh general practice sentinel surveillance scheme for infectious diseases, compared with annual shingles consultation rates from the same scheme to exclude reporting fatigue and data from a general practice morbidity database to validate results. Setting: A total of 226 884 patients registered with one of 30 volunteer general practices participating in the sentinel surveillance scheme. Main outcome measures: Age standardised and age specific incidence of chickenpox. Results: Crude and age standardised consultation rates for chickenpox declined from 1986 to 2001, with loss of epidemic cycling. Rates remained stable in 0–4 year olds but declined in all older age groups, particularly those aged 5–14 years. Shingles consultation rates remained constant over the same period. Data from the morbidity database displayed similar trends. Conclusion: General practitioner consultation rates for chickenpox are declining in Wales except in pre-school children. These findings are unlikely to be a reporting artefact but may be explained either by an overall decline in transmission or increased social mixing in those under 5 years old, through formal child care and earlier school entry, and associated increasing rates of mild or subclinical infection in this age group. Further investigation, particularly by serological surveillance, is necessary before universal varicella immunisation can be considered in the UK. PMID:15383443

Impacts of Changing Climate, Hydrology and Land Use on the Stormwater Runoff of Urbanizing Central Florida

NASA Astrophysics Data System (ADS)

Huq, E.; Abdul-Aziz, O. I.

2017-12-01

We computed the historical and future storm runoff scenarios for the Shingle Creek Basin, including the growing urban centers of central Florida (e.g., City of Orlando). Storm Water Management Model (SWMM 5.1) of US EPA was used to develop a mechanistic hydrologic model for the basin by incorporating components of urban hydrology, hydroclimatological variables, and land use/cover features. The model was calibrated and validated with historical streamflow of 2004-2013 near the outlet of the Shingle Creek. The calibrated model was used to compute the sensitivities of stormwater budget to reference changes in hydroclimatological variables (rainfall and evapotranspiration) and land use/cover features (imperviousness, roughness). Basin stormwater budgets for the historical (2010s = 2004-2013) and future periods (2050s = 2030-2059; 2080s = 2070-2099) were also computed based on downscaled climatic projections of 20 GCMs-RCMs representing the coupled model intercomparison project (CMIP5), and anticipated changes in land use/cover. The sensitivity analyses indicated the dominant drivers of urban runoff in the basin. Comparative assessment of the historical and future stormwater runoff scenarios helped to locate basin areas that would be at a higher risk of future stormwater flooding. Importance of the study lies in providing valuable guidelines for managing stormwater flooding in central Florida and similar growing urban centers around the world.

The contribution of particles washed from rooftops to contaminant loading to urban streams.

PubMed

Van Metre, P C; Mahler, B J

2003-09-01

Rooftops are both a source of and a pathway for contaminated runoff in urban environments. To investigate the importance of particle-associated contamination in rooftop runoff, particles washed from asphalt shingle and galvanized metal roofs at sites 12 and 102 m from a major expressway were analyzed for major and trace elements and PAHs. Concentrations and yields from rooftops were compared among locations and roofing material types and to loads monitored during runoff events in the receiving urban stream to evaluate rooftop sources and their potential contribution to stream loading. Concentrations of zinc, lead, pyrene, and chrysene on a mass per mass basis in a majority of rooftop samples exceeded established sediment quality guidelines for probable toxicity of bed sediments to benthic biota. Fallout near the expressway was greater than farther away, as indicated by larger yields of all contaminants investigated, although some concentrations were lower. Metal roofing was a source of cadmium and zinc and asphalt shingles a source of lead. The contribution of rooftop washoff to watershed loading was estimated to range from 6 percent for chromium and arsenic to 55 percent for zinc. Estimated contributions from roofing material to total watershed load were greatest for zinc and lead, contributing about 20 and 18 percent, respectively. The contribution from atmospheric deposition of particles onto rooftops to total watershed loads in stormwater was estimated to be greatest for mercury, contributing about 46 percent.

Returning to STEM: Gendered Factors Affecting Employability for Mature Women Students

ERIC Educational Resources Information Center

Herman, Clem

2015-01-01

This paper adds to current discourses around employability by arguing for an explicit recognition of gender, in particular in relation to women's employment in male-dominated sectors such as science, engineering and technology. This is not limited to young first-time graduates but continues and evolves throughout the life course. Mature women…

Distilling the Verification Process for Prognostics Algorithms

NASA Technical Reports Server (NTRS)

Roychoudhury, Indranil; Saxena, Abhinav; Celaya, Jose R.; Goebel, Kai

2013-01-01

The goal of prognostics and health management (PHM) systems is to ensure system safety, and reduce downtime and maintenance costs. It is important that a PHM system is verified and validated before it can be successfully deployed. Prognostics algorithms are integral parts of PHM systems. This paper investigates a systematic process of verification of such prognostics algorithms. To this end, first, this paper distinguishes between technology maturation and product development. Then, the paper describes the verification process for a prognostics algorithm as it moves up to higher maturity levels. This process is shown to be an iterative process where verification activities are interleaved with validation activities at each maturation level. In this work, we adopt the concept of technology readiness levels (TRLs) to represent the different maturity levels of a prognostics algorithm. It is shown that at each TRL, the verification of a prognostics algorithm depends on verifying the different components of the algorithm according to the requirements laid out by the PHM system that adopts this prognostics algorithm. Finally, using simplified examples, the systematic process for verifying a prognostics algorithm is demonstrated as the prognostics algorithm moves up TRLs.

Using an Integrated Distributed Test Architecture to Develop an Architecture for Mars

NASA Technical Reports Server (NTRS)

Othon, William L.

2016-01-01

The creation of a crew-rated spacecraft architecture capable of sending humans to Mars requires the development and integration of multiple vehicle systems and subsystems. Important new technologies will be identified and matured within each technical discipline to support the mission. Architecture maturity also requires coordination with mission operations elements and ground infrastructure. During early architecture formulation, many of these assets will not be co-located and will required integrated, distributed test to show that the technologies and systems are being developed in a coordinated way. When complete, technologies must be shown to function together to achieve mission goals. In this presentation, an architecture will be described that promotes and advances integration of disparate systems within JSC and across NASA centers.

Strategic Planning of Technology Transfer.

ERIC Educational Resources Information Center

Groff, Warren H.

Using the Ohio Technology Transfer Organization (OTTO) as its primary example, this paper offers a strategic planning perspective on technology transfer and human resources development. First, a brief overview is provided of the maturation of mission priorities and planning processes in higher education in the United States, followed by a…

Serum human chorionic gonadotropin levels on the day before oocyte retrieval do not correlate with oocyte maturity.

PubMed

Levy, Gary; Hill, Micah J; Ramirez, Christina; Plowden, Torrie; Pilgrim, Justin; Howard, Robin S; Segars, James H; Csokmay, John

2013-05-01

To evaluate the correlation of preretrieval quantitative serum hCG level with oocyte maturity. Retrospective cohort study. Military assisted reproductive technology (ART) program. Fresh autologous ART cycles. Serum hCG level the day before oocyte retrieval. Linear regression was used to correlate serum hCG levels and oocyte maturity rates. Normal oocyte maturity was defined as ≥75% and the Wilcoxon rank sum test was used to compare serum hCG levels in patients with normal and low oocyte maturity. Threshold analysis was performed to determine hCG levels that could predict oocyte maturity. A total of 468 ART cycles were analyzed. Serum hCG level was not correlated with hCG dose; however, it was negatively correlated with body mass index (BMI). Serum hCG levels did not differ between patients with oocyte maturity of <75% and ≥75%. Serum hCG levels did not correlate with oocyte maturity rates. Receiver operator characteristic and less than efficiency curves failed to demonstrate thresholds at which hCG could predict oocyte maturity. Serum hCG levels were not correlated with oocyte maturity. Although a positive hCG was reassuring that mature oocytes would be retrieved for most patients, the specific value was not helpful. Copyright © 2013. Published by Elsevier Inc.

Developmental competence of equine oocytes and embryos obtained by in vitro procedures ranging from in vitro maturation and ICSI to embryo culture, cryopreservation and somatic cell nuclear transfer.

PubMed

Galli, C; Colleoni, S; Duchi, R; Lagutina, I; Lazzari, G

2007-03-01

Development of assisted reproductive technologies in horses has been relatively slow compared to other domestic species, namely ruminants and pigs. The scarce availability of abattoir ovaries and the lack of interest from horse breeders and breed associations have been the main reasons for this delay. Progressively though, the technology of oocyte maturation in vitro has been established followed by the application of ICSI to achieve fertilization in vitro. Embryo culture was initially performed in vivo, in the mare oviduct or in the surrogate sheep oviduct, to achieve the highest embryo development, in the range of 18-36% of the fertilised oocytes. Subsequently, the parallel improvement of in vitro oocyte maturation conditions and embryo culture media has permitted high rates of embryo development from in vitro matured and in vitro cultured ICSI embryos, ranging from 5 to 10% in the early studies to up to 38% in the latest ones. From 2003, with the birth of the first cloned equids, the technology of somatic cell nuclear transfer has also become established due to improvement of the basic steps of embryo production in vitro, including cryopreservation. Pregnancy and foaling rates are still estimated based on a small number of in vitro produced equine embryos transferred to recipients. The largest set of data on non-surgical embryo transfer of in vitro produced embryos, from ICSI of both abattoir and in vitro-matured Ovum Pick Up (OPU) oocytes, and from somatic cell nuclear transfer, has been obtained in our laboratory. The data demonstrate that equine embryos produced by OPU and then cryopreserved can achieve up to 69% pregnancy rate with a foaling rate of 83%. These percentages are reduced to 11 and 23%, respectively, for cloned embryos. In conclusion, extensive evidence exists that in vitro matured equine oocytes can efficiently develop into viable embryos and offspring.

Evaluating the Maturity of Cybersecurity Programs for Building Control Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glantz, Clifford S.; Somasundaram, Sriram; Mylrea, Michael E.

The cyber-physical security threat to buildings is complex, non-linear, and rapidly evolving as operational and information technologies converge and connect buildings to cyberspace. Cyberattacks on buildings can exploit smart building controls and breach corporate networks, causing financial and reputational damage. This may result in the loss of sensitive building information or the disruption of, or damage to, the systems necessary for the safe and efficient operation of buildings. For the buildings and facility infrastructure, there is a need for a robust national cybersecurity strategy for buildings, guidance on the selection and implementation of appropriate cybersecurity controls for buildings, an approachmore » to evaluate the maturity and adequacy of the cybersecurity programs. To provide an approach for evaluating the maturity of the cybersecurity programs for building control systems, the US Department of Energy’s widely used Cybersecurity Capability and Maturity Model (C2M2) has been adapted into a building control systems version. The revised model, the Buildings-C2M2 (B-C2M2) provides maturity level indicators for cybersecurity programmatic domains. A “B-C2M2 Lite” version allows facility managers and building control system engineers, or information technology personnel to perform rapid self-assessments of their cybersecurity program. Both tools have been pilot tested on several facilities. This paper outlines the concept of a maturity model, describes the B-C2M2 tools, presents results and observations from the pilot assessments, and lays out plans for future work.« less

U.S. Army Medical Department

MedlinePlus

... Games, they came ready to play. Read more Image-2 Excerpt-2 Training, technological synergy key to future battlefield care scenarios To obtain a more complete, more mature fusion of technology and Soldier, Army Medicine focuses on ...

Willingness to pay for a QALY based on community member and patient preferences for temporary health states associated with herpes zoster.

PubMed

Lieu, Tracy A; Ray, G Thomas; Ortega-Sanchez, Ismael R; Kleinman, Ken; Rusinak, Donna; Prosser, Lisa A

2009-01-01

A clear sense of what society is willing to pay for a QALY could enhance the usefulness of cost-effectiveness analysis as a field. Scant information exists on willingness to pay (WTP) for a QALY based on direct elicitation of preferences from community members or patients. We had the opportunity to evaluate WTP per QALY using data from a survey on temporary health outcomes related to herpes zoster. Our aims were to (i) describe how much community members are willing to pay to save a QALY based on scenarios describing temporary health states; (ii) evaluate how WTP per QALY varies based on experience with the disease being described and with demographic variables; and (iii) evaluate how the duration and intensity of pain in a scenario influences WTP per QALY. Community members drawn from a nationally representative survey research panel (n = 478) completed an Internet-based survey using time trade-off (TTO) and WTP questions to value a series of scenarios that described herpes zoster cases of varying pain intensity (on a scale of 0-10) and duration (30 days to 1 year). Patients with shingles (n = 354) or postherpetic neuralgia (PHN; n = 120) [defined as having symptoms for 90 days or more] from two large healthcare systems completed telephone interviews with similar questions. Mean and median WTP per QALY values were calculated by dividing the WTP amount by the discounted time traded for each scenario. Responses with a WTP value of more than zero and a TTO value of zero (which would have resulted in an undefined value) were excluded. TTO values were discounted by 3% per year. WTP per QALY means were calculated after trimming the top and bottom 2.5% of responses. Multivariate analyses were conducted using generalized linear mixed models that assumed a negative binomial distribution. Among all respondents, the WTP per QALY ranged from a median of $US7000 to $US11,000 and a trimmed mean of $US26 000 to $US45,000 (year 2005 values), depending on the scenario described. WTP per QALY values varied significantly with respondent characteristics, as well as among respondents with similar characteristics. In multivariate analyses, the mean WTP per QALY was higher among respondents who were younger, male or had higher educational or income levels. After adjusting for these demographic variables, patients who had experienced shingles gave responses with the highest WTP per QALY values. Patients who had experienced PHN gave the lowest values, and community members gave values intermediate to the shingles and PHN groups. In multivariate models that evaluated the effects of pain and duration of the hypothetical zoster scenario, lower duration was associated with higher WTP per QALY. This effect appeared to be due to people increasing the amounts of time they would be willing to trade as duration increased, without proportional increases in the amounts of money they would be willing to pay. Community members and patients gave mean WTP per QALY values that varied significantly based on age, sex, socioeconomic status, experience with shingles and duration of the health state evaluated. The variability in WTP per QALY suggests that it may be difficult to define a unitary threshold of dollars per QALY for policy making based on cost-effectiveness analyses.

Design of the ARES Mars Airplane and Mission Architecture

NASA Technical Reports Server (NTRS)

Braun, Robert D.; Wright, Henry S.; Croom, Mark A.; Levine, Joel S.; Spencer, David A.

2006-01-01

Significant technology advances have enabled planetary aircraft to be considered as viable science platforms. Such systems fill a unique planetary science measurement gap, that of regional-scale, near-surface observation, while providing a fresh perspective for potential discovery. Recent efforts have produced mature mission and flight system concepts, ready for flight project implementation. This paper summarizes the development of a Mars airplane mission architecture that balances science, implementation risk and cost. Airplane mission performance, flight system design and technology maturation are described. The design, analysis and testing completed demonstrates the readiness of this science platform for use in a Mars flight project.

Mobile Technology in 2020: Predictions and Implications for K-12 Education

ERIC Educational Resources Information Center

Norris, Cathleen A.; Soloway, Elliot

2015-01-01

While "mobile learning" has gained recognition in K-12 as a category in educational technology, the authors argue that, between 2010 and 2015, at least, its impact hasn't matched the hype. But between 2015 and 2020, hardware, software, and network technologies will mature sufficiently such that educational technology's Holy…

Advanced Manufacturing Technologies

NASA Technical Reports Server (NTRS)

Fikes, John

2016-01-01

Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

A Systematic Review Approach to Technologies Used for Learning and Education

ERIC Educational Resources Information Center

Purarjomandlangrudi, Afrooz; Chen, David; Nguyen, Anne

2015-01-01

E-learning is implementation of technologies in learning process and is growing at a very rapid pace. E-learning technology has matured noticeably and the majority of organisations are taking advantage of it in their educational systems. However, there is a lack of methodical and consistent paradigm of these technologies in literature. The purpose…

Project Icarus: Nuclear Fusion Propulsion Concept Comparison

NASA Astrophysics Data System (ADS)

Stanic, M.

Project Icarus will use nuclear fusion as the primary propulsion, since achieving breakeven is imminent within the next decade. Therefore, fusion technology provides confidence in further development and fairly high technological maturity by the time the Icarus mission would be plausible. Currently there are numerous (over 2 dozen) different fusion approaches that are simultaneously being developed around the World and it is difficult to predict which of the concepts is going to be the most successful one. This study tried to estimate current technological maturity and possible technological extrapolation of fusion approaches for which appropriate data could be found. Figures of merit that were assessed include: current technological state, mass and volume estimates, possible gain values, main advantages and disadvantages of the concept and an attempt to extrapolate current technological state for the next decade or two. Analysis suggests that Magnetic Confinement Fusion (MCF) concepts are not likely to deliver sufficient performance due to size, mass, gain and large technological barriers of the concept. However, ICF and PJMIF did show potential for delivering necessary performance, assuming appropriate techno- logical advances. This paper is a submission of the Project Icarus Study Group.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tugurlan, Maria C.; Kirkham, Harold; Chassin, David P.

Abstract Budget and schedule overruns in product development due to the use of immature technologies constitute an important matter for program managers. Moreover, unexpected lack of technology maturity is also a problem for buyers. Both sides of the situation would benefit from an unbiased measure of technology maturity. This paper presents the use of a software maturity metric called Technology Readiness Level (TRL), in the milieu of the smart grid. For most of the time they have been in existence, power utilities have been protected monopolies, guaranteed a return on investment on anything they could justify adding to the ratemore » base. Such a situation did not encourage innovation, and instead led to widespread risk-avoidance behavior in many utilities. The situation changed at the end of the last century, with a series of regulatory measures, beginning with the Public Utility Regulatory Policy Act of 1978. However, some bad experiences have actually served to strengthen the resistance to innovation by some utilities. Some aspects of the smart grid, such as the addition of computer-based control to the power system, face an uphill battle. It is our position that the addition of TRLs to the decision-making process for smart grid power-system projects, will lead to an environment of more confident adoption.« less

X-43 Hypersonic Vehicle Technology Development

NASA Technical Reports Server (NTRS)

Voland, Randall T.; Huebner, Lawrence D.; McClinton, Charles R.

2005-01-01

NASA recently completed two major programs in Hypersonics: Hyper-X, with the record-breaking flights of the X-43A, and the Next Generation Launch Technology (NGLT) Program. The X-43A flights, the culmination of the Hyper-X Program, were the first-ever examples of a scramjet engine propelling a hypersonic vehicle and provided unique, convincing, detailed flight data required to validate the design tools needed for design and development of future operational hypersonic airbreathing vehicles. Concurrent with Hyper-X, NASA's NGLT Program focused on technologies needed for future revolutionary launch vehicles. The NGLT was "competed" by NASA in response to the President s redirection of the agency to space exploration, after making significant progress towards maturing technologies required to enable airbreathing hypersonic launch vehicles. NGLT quantified the benefits, identified technology needs, developed airframe and propulsion technology, chartered a broad University base, and developed detailed plans to mature and validate hypersonic airbreathing technology for space access. NASA is currently in the process of defining plans for a new Hypersonic Technology Program. Details of that plan are not currently available. This paper highlights results from the successful Mach 7 and 10 flights of the X-43A, and the current state of hypersonic technology.

Recent developments in chemical decontamination technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, C.J.

1995-03-01

Chemical decontamination of parts of reactor coolant systems is a mature technology, used routinely in many BWR plants, but less frequently in PWRs. This paper reviews recent developments in the technology - corrosion minimization, waste processing and full system decontamination, including the fuel. Earlier work was described in an extensive review published in 1990.

Organizational Considerations for Advanced Manufacturing Technology

ERIC Educational Resources Information Center

DeRuntz, Bruce D.; Turner, Roger M.

2003-01-01

In the last several decades, the United States has experienced a decline in productivity, while the world has seen a maturation of the global marketplace. Nations have moved manufacturing strategy and process technology issues to the top of management priority lists. The issues surrounding manufacturing technologies and their implementations have…

Integration of National Laboratory and Low-Activity Waste Pre-Treatment System Technology Service Providers - 16435

DOE Office of Scientific and Technical Information (OSTI.GOV)

Subramanian, Karthik H.; Thien, Michael G.; Wellman, Dawn M.

The National Laboratories are a critical partner and provide expertise in numerous aspects of the successful execution of the Direct-Feed Low Activity Waste Program. The National Laboratories are maturing the technologies of the Low-Activity Waste Pre-Treatment System (LAWPS) consistent with DOE Order 413.3B “Program and Project Management for the Acquisition of Capital Assets” expectations. The National Laboratories continue to mature waste forms, i.e. glass and secondary waste grout, for formulations and predictions of long-term performance as inputs to performance assessments. The working processes with the National Laboratories have been developed in procurements, communications, and reporting to support the necessary delivery-basedmore » technology support. The relationship continues to evolve from planning and technology development to support of ongoing operations and integration of multiple highly coordinated facilities.« less

Reservoir sequence analysis: A new technology for the 90`s and its application to oil and gas fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wornardt, W.W.

1996-08-01

Reservoir Sequence Analysis when applied to existing fields can increase the production, life of the field and extend the field with a minimum of cost. In this technology we identify reservoir sands in a standard-of-reference well, to establish a seismic sequence stratigraphic well-tie for the entire field. Age date the Maximum Flooding Surfaces and Sequence Boundaries above and below reservoir sands on a well-log and seismic pro- file and/or workstation using High Resolution Biostratigraphic Analysis, species abundance and diversity histograms and their patterns, and paleoenvironmental paleobathymetric changes. Identify the systems tracts and their corresponding reservoir sands in between age datedmore » Maximum Flooding Surfaces. Interpret the reservoir sands as to type, i.e. IVF, point bar, coastal belt, forced regression, falling stage, bottom-set (shingled) turbidites, slope fan channel, channel overbank, and basin floor fans. Identify and correlate the same individual sands in different wells, and note new sands in a well and sands that shale-out in a well. Correlate the Maximum Flooding Surfaces above and below the reservoir section in additional wells to see which part of the reservoir section and sands have been penetrated. Identify systems tracts in additional wells and construct isopach, sand percent maps of individual systems tract interval in each well. Correlate sand packages, with a high degree of confidence, from upthrown to downthrown fault blocks, around salt domes, and updip with downdip.« less

Sex and Gender Impact Immune Responses to Vaccines Among the Elderly

PubMed Central

Fink, Ashley L.

2015-01-01

In response to the recommended vaccines in older-aged individuals, sex differences occur in response to those that protect against influenza, tetanus, pertussis, shingles, and pneumococcal infections. The efficacy of vaccines recommended for older-aged adults is consistently greater for females than for males. Gender differences as well as biological sex differences can influence vaccine uptake, responses, and outcome in older-aged individuals, which should influence guidelines, formulations, and dosage recommendations for vaccines in the elderly. PMID:26525340

Block 4 solar cell module design and test specification for residential applications

NASA Technical Reports Server (NTRS)

1978-01-01

Near-term design, qualification and acceptance requirements are provided for terrestrial solar cell modules suitable for incorporation in photovoltaic power sources (2 kW to 10 kW) applied to single family residential installations. Requirement levels and recommended design limits for selected performance criteria are specified for modules intended principally for rooftop installations. Modules satisfying the requirements of this specification fall into one of two categories, residential panel or residential shingle, both meeting general performance requirements plus additional category peculiar constraints.

EFG solar modules

NASA Technical Reports Server (NTRS)

1978-01-01

Six photovoltaic modules using solar cells fabricated from silicon ribbons were assembled and delivered to JPL. Each module was comprised of four separate submodules which were parallel connected. The submodules contained 45 EFG cells which were series interconnected by a shingle or overlapping design. The inherent rectangular shape of the cells allowed a high packing factor to be achieved. The average efficiency of the six modules, corrected to AM1 at 28 C was 8.7%, which indicates that the average encapsulated cell efficiency was 10.0%.

Environmentally Responsible Aviation: Propulsion Research to Enable Fuel Burn, Noise and Emissions Reduction

NASA Technical Reports Server (NTRS)

Van Zante, Dale; Suder, Kenneth

2015-01-01

The NASA Environmentally Responsible Aviation (ERA) program is maturing technologies to enable simultaneous reduction of fuel burn, noise and emissions from an aircraft engine system. Three engine related Integrated Technology Demonstrations (ITDs) have been completed at Glenn Research Center in collaboration with Pratt Whitney, General Electric and the Federal Aviation Administration. The engine technologies being matured are: a low NOx, fuel flexible combustor in partnership with Pratt Whitney; an ultra-high bypass, ducted propulsor system in partnership with Pratt Whitney and FAA; and high pressure ratio, front-stage core compressor technology in partnership with General Electric. The technical rationale, test configurations and overall results from the test series in each ITD are described. ERA is using system analysis to project the benefits of the ITD technologies on potential aircraft systems in the 2025 timeframe. Data from the ITD experiments were used to guide the system analysis assumptions. Results from the current assessments for fuel burn, noise and oxides of nitrogen emissions are presented.

Technology development life cycle processes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beck, David Franklin

2013-05-01

This report and set of appendices are a collection of memoranda originally drafted in 2009 for the purpose of providing motivation and the necessary background material to support the definition and integration of engineering and management processes related to technology development. At the time there was interest and support to move from Capability Maturity Model Integration (CMMI) Level One (ad hoc processes) to Level Three. As presented herein, the material begins with a survey of open literature perspectives on technology development life cycles, including published data on %E2%80%9Cwhat went wrong.%E2%80%9D The main thrust of the material presents a rational expose%CC%81more » of a structured technology development life cycle that uses the scientific method as a framework, with further rigor added from adapting relevant portions of the systems engineering process. The material concludes with a discussion on the use of multiple measures to assess technology maturity, including consideration of the viewpoint of potential users.« less

Environmentally Responsible Aviation: Propulsion Research to Enable Fuel Burn, Noise and Emissions Reduction

NASA Technical Reports Server (NTRS)

Van Zante, Dale E.; Suder, Kenneth L.

2015-01-01

The NASA Environmentally Responsible Aviation (ERA) program is maturing technologies to enable simultaneous reduction of fuel burn, noise and emissions from an aircraft engine system. Three engine related Integrated Technology Demonstrations (ITDs) have been completed at Glenn Research Center in collaboration with Pratt Whitney, General Electric and the Federal Aviation Administration. The engine technologies being matured are a low NOx, fuel flexible combustor in partnership with Pratt Whitney, an ultra-high bypass, ducted propulsor system in partnership with Pratt Whitney FAA and high pressure ratio, front-stage core compressor technology in partnership with General Electric. The technical rationale, test configurations and overall results from the test series in each ITD are described. ERA is using system analysis to project the benefits of the ITD technologies on potential aircraft systems in the 2025 timeframe. Data from the ITD experiments were used to guide the system analysis assumptions. Results from the current assessments for fuel burn, noise and oxides of nitrogen emissions are presented.

Technologies and Concepts for Reducing the Fuel Burn of Subsonic Transport Aircraft

NASA Technical Reports Server (NTRS)

Nickol, Craig L.

2012-01-01

There are many technologies under development that have the potential to enable large fuel burn reductions in the 2025 timeframe for subsonic transport aircraft relative to the current fleet. This paper identifies a potential technology suite and analyzes the fuel burn reduction potential of these technologies when integrated into advanced subsonic transport concepts. Advanced tube-and-wing concepts are developed in the single aisle and large twin aisle class, and a hybrid-wing-body concept is developed for the large twin aisle class. The resulting fuel burn reductions for the advanced tube-and-wing concepts range from a 42% reduction relative to the 777-200 to a 44% reduction relative to the 737-800. In addition, the hybrid-wingbody design resulted in a 47% fuel burn reduction relative to the 777-200. Of course, to achieve these fuel burn reduction levels, a significant amount of technology and concept maturation is required between now and 2025. A methodology for capturing and tracking concept maturity is also developed and presented in this paper.

Early Market TRL/MRL Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronnebro, Ewa; Stetson, Ned

he focus of this report is TRL/MRL analysis of hydrogen storage; it documents the methodology and results of an effort to identify hydrogen storage technologies’ technical and manufacturing readiness for early market motive and non-motive applications and to provide a path forward toward commercialization. Motive applications include materials handling equipment (MHE) and ground support equipment (GSE), such as forklifts, tow tractors, and specialty vehicles such as golf carts, lawn mowers and wheel chairs. Non-motive applications are portable, stationary or auxiliary power units (APUs) and include portable laptops, backup power, remote sensor power, and auxiliary power for recreational vehicles, hotels, hospitals,more » etc. Hydrogen storage technologies assessed include metal hydrides, chemical hydrides, sorbents, gaseous storage, and liquid storage. The assessments are based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies at varying levels of development. The manufacturing status could be established from eight risk elements: Technical Maturity, Design, Materials, Cost & Funding, Process Capability, Personnel, Facilities and Manufacturing Planning. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale that is easily communicated to interagency partners. This technology readiness assessment (TRA) report documents the process used to conduct the TRA/MRA (technology and manufacturing readiness assessment), reports the TRL and MRL for each assessed technology and provides recommendations based on the findings. To investigate the state of the art and needs to mature the technologies, PNNL prepared a questionnaire to assign TRL and MRL for each hydrogen storage technology. The questionnaire was sent to identified hydrogen storage technology developers and manufacturers who were asked to perform a self-assessment. We included both domestic and international organizations including U.S. national laboratories, U.S. companies, European companies and Japanese companies. PNNL collected the data and performed an analysis to deduce the level of maturity and to provide program recommendations.« less

NASA Astrophysics Cosmic Origins (COR) and Physics of the Cosmos (PCOS) Strategic Technology Development Program

NASA Astrophysics Data System (ADS)

Pham, Thai; Seery, Bernard D.

2015-01-01

The COR and PCOS Program Offices (PO) reside at the NASA Goddard Space Flight Center (GSFC), serving as the NASA Astrophysics Division's implementation arm for matters relating to the two programs. One aspect of the PO's activities is managing the COR and PCOS Strategic Astrophysics Technology (SAT) program, helping mature technologies to enable and enhance future astrophysics missions.The PO is guided by the National Research Council's 'New Worlds, New Horizons in Astronomy and Astrophysics' Decadal Survey report, and NASA's Astrophysics Implementation Plan. Strategic goals include dark energy; gravitational waves; X-ray observatories, e.g., US participation in ATHENA; Inflation probe; and a large UV/Visible telescope.To date, 51 COR and 65 PCOS SAT proposals have been received, of which 11 COR and 18 PCOS projects were funded. Notable successes include maturation of a new far-IR detector, later adopted by the SOFIA HAWC instrument; maturation of the H4RG near-IR detector, adopted by WFIRST; development of an antenna-coupled transition-edge superconducting bolometer, a technology deployed by BICEP2 that allowed measurement of B-mode polarization in the CMB signal, a possible signature of Inflation; and finally, the REXIS instrument on OSIRIS-REx is incorporating CCDs with directly deposited optical blocking filters developed by another SAT-funded project.We discuss our technology development process, with community input and strategic prioritization informing calls for SAT proposals and guiding investment decisions. We also present results of this year's technology gap prioritization and showcase our current portfolio of technology development projects. These include five newly selected projects, kicking off in FY 2015.For more information, visit the COR Program website at cor.gsfc.nasa.gov and the PCOS website at pcos.gsfc.nasa.gov.

Serum human chorionic gonadotropin levels on the day before oocyte retrieval do not correlate with oocyte maturity

PubMed Central

Levy, Gary; Hill, Micah J.; Ramirez, Christina; Plowden, Torrie; Pilgrim, Justin; Howard, Robin S.; Segars, James H.; Csokmay, John

2014-01-01

Objective To evaluate the correlation of preretrieval quantitative serum hCG level with oocyte maturity. Design Retrospective cohort study. Setting Military assisted reproductive technology (ART) program. Patient(s) Fresh autologous ART cycles. Intervention(s) Serum hCG level the day before oocyte retrieval. Main Outcome Measure(s) Linear regression was used to correlate serum hCG levels and oocyte maturity rates. Normal oocyte maturity was defined as ≥ 75% and the Wilcoxon rank sum test was used to compare serum hCG levels in patients with normal and low oocyte maturity. Threshold analysis was performed to determine hCG levels that could predict oocyte maturity. Result(s) A total of 468 ART cycles were analyzed. Serum hCG level was not correlated with hCG dose; however, it was negatively correlated with body mass index (BMI). Serum hCG levels did not differ between patients with oocyte maturity of <75% and ≥ 75%. Serum hCG levels did not correlate with oocyte maturity rates. Receiver operator characteristic and less than efficiency curves failed to demonstrate thresholds at which hCG could predict oocyte maturity. Conclusion(s) Serum hCG levels were not correlated with oocyte maturity. Although a positive hCG was reassuring that mature oocytes would be retrieved for most patients, the specific value was not helpful. PMID:23375205

The K-12 Educational Technology Value Chain: Apps for Kids, Tools for Teachers and Levers for Reform

ERIC Educational Resources Information Center

Pierce, Glenn L.; Cleary, Paul F.

2016-01-01

Historically implementing, maintaining and managing educational technology has been difficult for K-12 educational systems. Consequently, opportunities for significant advances in K-12 education have often gone unrealized. With the maturation of Internet delivered services along with K-12 institutional trends, educational technologies are poised…

Advances in integrated system heath management system technologies : overview of NASA and industry collaborative activities

NASA Technical Reports Server (NTRS)

Dixit, Sunil; Brown, Steve; Fijany, Amir; Park, Han; Mackey, Ryan; James, Mark; Baroth, Ed

2005-01-01

This paper will describe recent advances in ISHM technologies made through collaboration between NASA and industry. In particular, the paper will focus on past, present, and future technology development and maturation efforts at the Jet Propulsion Laboratory (JPL) and its industry partner, Northrop Grumman lntegrated Systems (NGIS).

From the Gleam in the Eye of an Engineer to a Dream Classroom: How Assistive Technology Products Move from Research and Development into the Hands of Children

ERIC Educational Resources Information Center

de St. Aubin, Shawn-Laree

2010-01-01

This article explains how Asssistive Technology products move from research and development into the hands of children. The assistive technology (AT) industry is maturing, with many exciting new technologies under development in university settings, by individual inventors and engineers, and by leading AT and information technology (IT) companies.…

Microsystems: from technologies to products

NASA Astrophysics Data System (ADS)

Ryser, Peter

2003-10-01

In this paper, we outline the process leading from technologies to successful products in the MEMS (Microelectromechanical Systems) and MST (Microsystems Technology) field. The development of new products involves a lot of factors, such as mature technologies, interdisciplinary team, identifying the right business potential and long term oriented investors. The paper summarizes a survey of different technologies and point out that packaging, test and calibration are still major shortcomings for the concerned industries.

State of the art and taxonomy of prognostics approaches, trends of prognostics applications and open issues towards maturity at different technology readiness levels

NASA Astrophysics Data System (ADS)

Javed, Kamran; Gouriveau, Rafael; Zerhouni, Noureddine

2017-09-01

Integrating prognostics to a real application requires a certain maturity level and for this reason there is a lack of success stories about development of a complete Prognostics and Health Management system. In fact, the maturity of prognostics is closely linked to data and domain specific entities like modeling. Basically, prognostics task aims at predicting the degradation of engineering assets. However, practically it is not possible to precisely predict the impending failure, which requires a thorough understanding to encounter different sources of uncertainty that affect prognostics. Therefore, different aspects crucial to the prognostics framework, i.e., from monitoring data to remaining useful life of equipment need to be addressed. To this aim, the paper contributes to state of the art and taxonomy of prognostics approaches and their application perspectives. In addition, factors for prognostics approach selection are identified, and new case studies from component-system level are discussed. Moreover, open challenges toward maturity of the prognostics under uncertainty are highlighted and scheme for an efficient prognostics approach is presented. Finally, the existing challenges for verification and validation of prognostics at different technology readiness levels are discussed with respect to open challenges.

Summary Findings from the AVT-191 Project to Assess Sensitivity Analysis and Uncertainty Quantification Methods for Military Vehicle Design

NASA Technical Reports Server (NTRS)

Benek, John A.; Luckring, James M.

2017-01-01

A NATO symposium held in Greece in 2008 identified many promising sensitivity analysis and uncertainty quantification technologies, but the maturity and suitability of these methods for realistic applications was not clear. The NATO Science and Technology Organization, Task Group AVT-191 was established to evaluate the maturity and suitability of various sensitivity analysis and uncertainty quantification methods for application to realistic vehicle development problems. The program ran from 2011 to 2015, and the work was organized into four discipline-centric teams: external aerodynamics, internal aerodynamics, aeroelasticity, and hydrodynamics. This paper summarizes findings and lessons learned from the task group.

Photon Sail History, Engineering, and Mission Analysis. Appendix

NASA Technical Reports Server (NTRS)

Matloff, Gregory L.; Taylor, Travis; Powell, Conley

2004-01-01

This Appendix summarizes the results of a Teledyne Brown Engineering, Inc. report to the In-Space propulsion research group of the NASA Marshall Space Flight Center (MSFC) that was authored by Taylor et al. in 2003. The subject of this report is the technological maturity, readiness, and capability of the photon solar sail to support space-exploration missions. Technological maturity for solar photon sail concepts is extremely high high for rectangular (or square) solar sail configurations due to the historical development of the rectangular design by the NASA Jet Propulsion Laboratory (JPL). L'Garde Inc., ILC Dover Inc., DLR, and many other corporations and agencies. However, future missions and mission analysis may prove that the rectangular sail design is not the best architecture for achieving mission goals. Due to the historical focus on rectangular solar sail spacecraft designs, the maturity of other architectures such as hoop-supported disks, multiple small disk arrays, parachute sails, heliogyro sails, perforated sails, multiple vane sails (such as the Planetary Society's Cosmos 1), inflated pillow sails, etc., have not reached a high level of technological readiness. (Some sail architectures are shown in Fig. A.1.) The possibilities of different sail architectures and some possible mission concepts are discussed in this Appendix.

Current status and applications of somatic cell nuclear transfer in dogs.

PubMed

Jang, Goo; Kim, Min Kyu; Lee, Byeong Chun

2010-11-01

Although somatic cell nuclear transfer (SCNT) technology and applications are well developed in most domesticated and laboratory animals, their use in dogs has advanced only slowly. Many technical difficulties had to be overcome before preliminary experiments could be conducted. First, due to the very low efficiency of dog oocyte maturation in vitro, in vivo matured oocytes were generally used. The nucleus of an in vivo matured oocyte was removed and a donor cell (from fetal or adult fibroblasts) was injected into the oocyte. Secondly, fusion of the reconstructed oocytes was problematic, and it was found that a higher electrical voltage was necessary, in comparison to other mammalian species. By transferring the resulting fused oocytes into surrogate females, several cloned offspring were born. SCNT was also used for producing cloned wolves, validating reproductive technologies for aiding conservation of endangered or extinct breeds. Although examples of transgenesis in canine species are very sparse, SCNT studies are increasing, and together with the new field of gene targeting technology, they have been applied in many fields of veterinary or bio-medical science. This review summarizes the current status of SCNT in dogs and evaluates its potential future applications. Copyright © 2010 Elsevier Inc. All rights reserved.

Advanced Mirror Technology Development (AMTD) Project: 3.0 Year Status

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2015-01-01

Advanced Mirror Technology Development (AMTD) is a funded NASA Strategic Astrophysics Technology project. Begun in 2011, we are in Phase 2 of a multi-year effort. Our objective is to mature towards TRL6 critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable astronomy mission can be considered by the 2020 Decadal Review. The developed technology must enable missions capable of both general astrophysics and ultra-high contrast observations of exoplanets. Just as JWST's architecture was driven by launch vehicle, a future UVOIR mission's architecture (monolithic, segmented or interferometric) will depend on capacities of future launch vehicles (and budget). Since we cannot predict the future, we must prepare for all potential futures. Therefore, we are pursuing multiple technology paths. AMTD uses a science-driven systems engineering approach. We mature technologies required to enable the highest priority science AND result in a high-performance low-cost low-risk system. One of our key accomplishments is that we have derived engineering specifications for advanced normal-incidence monolithic and segmented mirror systems needed to enable both general astrophysics and ultra-high contrast observations of exoplanets missions as a function of potential launch vehicle and its inherent mass and volume constraints. Another key accomplishment is that we have matured our technology by building and testing hardware. To demonstrate stacked core technology, we built a 400 mm thick mirror. Currently, to demonstrate lateral scalability, we are manufacturing a 1.5 meter mirror. To assist in architecture trade studies, the Engineering team develops Structural, Thermal and Optical Performance (STOP) models of candidate mirror assembly systems including substrates, structures, and mechanisms. These models are validated by test of full- and subscale components in relevant thermo-vacuum environments. Specific analyses include: maximum mirror substrate size, first fundamental mode frequency (i.e., stiffness) and mass required to fabricate without quilting, survive launch, and achieve stable pointing and maximum thermal time constant.

NASA's Spaceliner Investment Area Technology Activities

NASA Technical Reports Server (NTRS)

Hueter, Uwe; Lyles, Garry M. (Technical Monitor)

2001-01-01

NASA's has established long term goals for access-to-space. The third generation launch systems are to be fully reusable and operational around 2025. The goals for the third generation launch system are to significantly reduce cost and improve safety over current conditions. The Advanced Space Transportation Program Office (ASTP) at the NASA's Marshall Space Flight Center in Huntsville, AL has the agency lead to develop space transportation technologies. Within ASTP, under the Spaceliner Investment Area, third generation technologies are being pursued in the areas of propulsion, airframes, integrated vehicle health management (IVHM), avionics, power, operations, and range. The ASTP program will mature these technologies through both ground and flight system testing. The Spaceliner Investment Area plans to mature vehicle technologies to reduce the implementation risks for future commercially developed reusable launch vehicles (RLV). The plan is to substantially increase the design and operating margins of the third generation RLV (the Space Shuttle is the first generation) by incorporating advanced technologies in propulsion, materials, structures, thermal protection systems, avionics, and power. Advancements in design tools and better characterization of the operational environment will allow improvements in design margins. Improvements in operational efficiencies will be provided through use of advanced integrated health management, operations, and range technologies. The increase in margins will allow components to operate well below their design points resulting in improved component operating life, reliability, and safety which in turn reduces both maintenance and refurbishment costs. These technologies have the potential of enabling horizontal takeoff by reducing the takeoff weight and achieving the goal of airline-like operation. These factors in conjunction with increased flight rates from an expanding market will result in significant improvements in safety and reductions in operational costs of future vehicles. The paper describes current status, future plans and technologies that are being matured by the Spaceliner Investment Area under the Advanced Space Transportation Program Office.

NASA Astrophysics Funds Strategic Technology Development

NASA Astrophysics Data System (ADS)

Seery, Bernard D.; Ganel, Opher; Pham, Bruce

2016-01-01

The COR and PCOS Program Offices (POs) reside at the NASA Goddard Space Flight Center (GSFC), serving as the NASA Astrophysics Division's implementation arm for matters relating to the two programs. One aspect of the PO's activities is managing the COR and PCOS Strategic Astrophysics Technology (SAT) program, helping mature technologies to enable and enhance future astrophysics missions. For example, the SAT program is expected to fund key technology developments needed to close gaps identified by Science and Technology Definition Teams (STDTs) planned to study several large mission concept studies in preparation for the 2020 Decadal Survey.The POs are guided by the National Research Council's "New Worlds, New Horizons in Astronomy and Astrophysics" Decadal Survey report, NASA's Astrophysics Implementation Plan, and the visionary Astrophysics Roadmap, "Enduring Quests, Daring Visions." Strategic goals include dark energy, gravitational waves, and X-ray observatories. Future missions pursuing these goals include, e.g., US participation in ESA's Euclid, Athena, and L3 missions; Inflation probe; and a large UV/Optical/IR (LUVOIR) telescope.To date, 65 COR and 71 PCOS SAT proposals have been received, of which 15 COR and 22 PCOS projects were funded. Notable successes include maturation of a new far-IR detector, later adopted by the SOFIA HAWC instrument; maturation of the H4RG near-IR detector, adopted by WFIRST; development of an antenna-coupled transition-edge superconducting bolometer, a technology deployed by BICEP2/BICEP3/Keck to measure polarization in the CMB signal; advanced UV reflective coatings implemented on the optics of GOLD and ICON, two heliophysics Explorers; and finally, the REXIS instrument on OSIRIS-REx is incorporating CCDs with directly deposited optical blocking filters developed by another SAT-funded project.We discuss our technology development process, with community input and strategic prioritization informing calls for SAT proposals and guiding investment decisions. We also present results of this year's technology gap prioritization and showcase our current portfolio of technology development projects.

High responsivity CMOS imager pixel implemented in SOI technology

NASA Technical Reports Server (NTRS)

Zheng, X.; Wrigley, C.; Yang, G.; Pain, B.

2000-01-01

Availability of mature sub-micron CMOS technology and the advent of the new low noise active pixel sensor (APS) concept have enabled the development of low power, miniature, single-chip, CMOS digital imagers in the decade of the 1990's.

Investigation of the Use of Match Cure Technology in the Precast Concrete Industry

DOT National Transportation Integrated Search

1998-08-01

This project was proposed to evaluate the feasibility and methodology of implementing match cure technology and maturity measurement systems into TxDOT acceptance criteria for concrete construction projects. This report will deal strictly with the in...

Bone Morphogenetic Protein 15 in the Pro-Mature Complex Form Enhances Bovine Oocyte Developmental Competence

PubMed Central

Sudiman, Jaqueline; Sutton-McDowall, Melanie L.; Ritter, Lesley J.; White, Melissa A.; Mottershead, David G.; Thompson, Jeremy G.; Gilchrist, Robert B.

2014-01-01

Developmental competence of in vitro matured (IVM) oocytes needs to be improved and this can potentially be achieved by adding recombinant bone morphogenetic protein 15 (BMP15) or growth differentiation factor (GDF9) to IVM. The aim of this study was to determine the effect of a purified pro-mature complex form of recombinant human BMP15 versus the commercially available bioactive forms of BMP15 and GDF9 (both isolated mature regions) during IVM on bovine embryo development and metabolic activity. Bovine cumulus oocyte complexes (COCs) were matured in vitro in control medium or treated with 100 ng/ml pro-mature BMP15, mature BMP15 or mature GDF9 +/− FSH. Metabolic measures of glucose uptake and lactate production from COCs and autofluorescence of NAD(P)H, FAD and GSH were measured in oocytes after IVM. Following in vitro fertilisation and embryo culture, day 8 blastocysts were stained for cell numbers. COCs matured in medium +/− FSH containing pro-mature BMP15 displayed significantly improved blastocyst development (57.7±3.9%, 43.5±4.2%) compared to controls (43.3±2.4%, 28.9±3.7%) and to mature GDF9+FSH (36.1±3.0%). The mature form of BMP15 produced intermediate levels of blastocyst development; not significantly different to control or pro-mature BMP15 levels. Pro-mature BMP15 increased intra-oocyte NAD(P)H, and reduced glutathione (GSH) levels were increased by both forms of BMP15 in the absence of FSH. Exogenous BMP15 in its pro-mature form during IVM provides a functional source of oocyte-secreted factors to improve bovine blastocyst development. This form of BMP15 may prove useful for improving cattle and human artificial reproductive technologies. PMID:25058588

Bone morphogenetic protein 15 in the pro-mature complex form enhances bovine oocyte developmental competence.

PubMed

Sudiman, Jaqueline; Sutton-McDowall, Melanie L; Ritter, Lesley J; White, Melissa A; Mottershead, David G; Thompson, Jeremy G; Gilchrist, Robert B

2014-01-01

Developmental competence of in vitro matured (IVM) oocytes needs to be improved and this can potentially be achieved by adding recombinant bone morphogenetic protein 15 (BMP15) or growth differentiation factor (GDF9) to IVM. The aim of this study was to determine the effect of a purified pro-mature complex form of recombinant human BMP15 versus the commercially available bioactive forms of BMP15 and GDF9 (both isolated mature regions) during IVM on bovine embryo development and metabolic activity. Bovine cumulus oocyte complexes (COCs) were matured in vitro in control medium or treated with 100 ng/ml pro-mature BMP15, mature BMP15 or mature GDF9 +/- FSH. Metabolic measures of glucose uptake and lactate production from COCs and autofluorescence of NAD(P)H, FAD and GSH were measured in oocytes after IVM. Following in vitro fertilisation and embryo culture, day 8 blastocysts were stained for cell numbers. COCs matured in medium +/- FSH containing pro-mature BMP15 displayed significantly improved blastocyst development (57.7±3.9%, 43.5±4.2%) compared to controls (43.3±2.4%, 28.9±3.7%) and to mature GDF9+FSH (36.1±3.0%). The mature form of BMP15 produced intermediate levels of blastocyst development; not significantly different to control or pro-mature BMP15 levels. Pro-mature BMP15 increased intra-oocyte NAD(P)H, and reduced glutathione (GSH) levels were increased by both forms of BMP15 in the absence of FSH. Exogenous BMP15 in its pro-mature form during IVM provides a functional source of oocyte-secreted factors to improve bovine blastocyst development. This form of BMP15 may prove useful for improving cattle and human artificial reproductive technologies.

Advanced gasifier and water gas shift technologies for low cost coal conversion to high hydrogen syngas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kramer, Andrew Kramer

The Gas Technology Institute (GTI) and team members RTI International (RTI), Coanda Research and Development, and Nexant, are developing and maturing a portfolio of technologies to meet the United States Department of Energy (DOE) goals for lowering the cost of producing high hydrogen syngas from coal for use in carbon capture power and coal-to-liquids/chemicals. This project matured an advanced pilot-scale gasifier, with scalable and commercially traceable components, to readiness for use in a first-of-a-kind commercially-relevant demonstration plant on the scale of 500-1,000 tons per day (TPD). This was accomplished through cold flow simulation of the gasifier quench zone transition regionmore » at Coanda and through an extensive hotfire gasifier test program on highly reactive coal and high ash/high ash fusion temperature coals at GTI. RTI matured an advanced water gas shift process and catalyst to readiness for testing at pilot plant scale through catalyst development and testing, and development of a preliminary design basis for a pilot scale reactor demonstrating the catalyst. A techno-economic analysis was performed by Nexant to assess the potential benefits of the gasifier and catalyst technologies in the context of power production and methanol production. This analysis showed an 18%reduction in cost of power and a 19%reduction in cost of methanol relative to DOE reference baseline cases.« less

Technology transfer within the government

NASA Technical Reports Server (NTRS)

Russell, John

1992-01-01

The report of a workshop panel concerned with technology transfer within the government is presented. The presentation is made in vugraph form. The assigned subtopic for this panel are as follows: (1) transfer from non-NASA US government technology developers to NASA space missions/programs; and (2) transfer from NASA to other US government space mission programs. A specific area of inquiry was Technology Maturation Milestones. Three areas were investigated: technology development; advanced development; and flight hardware development.

NASA Composite Cryotank Technology Project Game Changing Program

NASA Technical Reports Server (NTRS)

Fikes, John

2015-01-01

The fundamental goal of this project was to provide new and innovative cryotank technologies that enable human space exploration to destinations beyond low earth orbit such as the moon, near-earth asteroids, and Mars. The goal ... to mature technologies in preparation for potential system level flight demonstrations through significant ground-based testing and/or laboratory experimentation

Adaptable, Deployable Entry and Placement Technology (ADEPT) for Future Mars Missions

NASA Technical Reports Server (NTRS)

Wercinski, P.; Venkatapathy, E.; Gage, P.; Prabhu, D.; Smith, B.; Cassell, A.; Yount, B.; Allen, G.

2013-01-01

The concept of a mechanically deploy- able hypersonic decelerator, developed initially for high mass (40 MT) human Mars missions, is currently funded by OCT for technology maturation. The ADEPT (Adaptive, Deployable Entry and Placement Technology) project has broad, game-changing applicability to in situ science missions to Venus, Mars, and the Outer Planets.

CD-ROM Technology: A Manual for Librarians and Educators.

ERIC Educational Resources Information Center

Mambretti, Catherine

The maturity of CD-ROM technology now shows a dramatic change in the way librarians and teachers do their jobs. Among their biggest challenges are deciding on equipment requirements and managing the disk collection. This manual is a step-by-step guide to making the most of CD-ROM technology in schools and libraries--from the acquisition of…

Heat Shield for Extreme Entry Environment Technology (HEEET)

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj

2017-01-01

The Heat Shield for Extreme Entry Environment Technology (HEEET) project seeks to mature a game changing Woven Thermal Protection System (TPS) technology to enable in situ robotic science missions recommended by the NASA Research Council Planetary Science Decadal Survey committee. Recommended science missions include Venus probes and landers; Saturn and Uranus probes; and high-speed sample return missions.

Mobile internet technologies and their application to intelligent transportation systems

DOT National Transportation Integrated Search

2003-01-01

The worlds of mobile communication and the Internet are rapidly converging. This new domain, which is being touted as the "Wireless Web" or "Mobile Internet", is in its infancy and will require a number of complex technologies to mature and converge ...

Microsystems Enabled Photovoltaics

ScienceCinema

Gupta, Vipin; Nielson, Greg; Okandan, Murat, Granata, Jennifer; Nelson, Jeff; Haney, Mike; Cruz-Campa, Jose Luiz

2018-06-07

Sandia's microsystems enabled photovoltaic advances combine mature technology and tools currently used in microsystem production with groundbreaking advances in photovoltaics cell design, decreasing production and system costs while improving energy conversion efficiency. The technology has potential applications in buildings, houses, clothing, portable electronics, vehicles, and other contoured structures.

An Analysis of Management Techniques and Their Impact on the Marine Corps in a Navy Marine Corps Intranet Environment

DTIC Science & Technology

2006-06-01

7 C. THE ENTERPRISE ARCHITECTURE MANAGEMENT MATURITY FRAMEWORK ...43 B. WHAT ARE INFORMATION TECHNOLOGY FRAMEWORKS AND WHY SHOULD THEY BE IMPLEMENTED?................................43 C...THE INFORMATION TECHNOLOGY INFRASTRUCTURE LIBRARY FRAMEWORK ..........................................................................44 1. What

Bioinspired catalytic materials for energy-relevant conversions

NASA Astrophysics Data System (ADS)

Artero, Vincent

2017-09-01

The structure of active sites of enzymes involved in bioenergetic processes can inspire design of active, stable and cost-effective catalysts for renewable-energy technologies. For these materials to reach maturity, the benefits of bioinspired systems must be combined with practical technological requirements.

Influence of vegetation on the infilling of a macrotidal embayment: examples from salt marshes and shingle spit of the Baie de Somme (North France)

NASA Astrophysics Data System (ADS)

Le Bot, Sophie; Forey, Estelle; Lafite, Robert; Langlois, Estelle

2015-04-01

As many estuaries in the English Channel, the Baie de Somme is currently filling with a mean seabed elevation between 1.3 and 1.8 cm/yr. Embankments and polders, as well as sea level rise, increase this natural accretion process, which leads to important modifications of environment uses. Interactions between vegetation and sediment dynamics constitute a key-point to consider, in order to better understand the infilling processes in estuaries. To estimate the effect of vegetation on these processes, two particular environments have been studied in the bay: (i) the mid salt marsh covered with Halimione portulacoides, associated with a silty sedimentation, and (ii) the shingle spit, that closes the bay from the South, on which the sea kale (Crambe maritime), a protected pioneer species, develops. Salt marshes progress with a rate of 5-10 m/yr (mean value calculated on the 1947-2011 period). Sedimentological analysis have been conducted on 9 cores (50cm long) collected in three Halimione communities of the bay. They are associated with a silty-dominated (38-84 micrometer) sedimentation under the influence of decantation processes. Rhythmicity is observed in the sedimentation, due to the repetition of a two-layer pattern, that includes a dark layer composed of vegetal rests and that would represent annual sedimentation. Annual sedimentation rates (0.7 to 5.8 cm/yr) are consistent with mean values previously recorded. The shingle spit progresses to the North under the influence of the littoral drift at a rate of 7 m/yr (mean value calculated on the 1947-2011 period). Sea kales are observed on parts formed since several years, above the level of the highest astronomical tides. TLS surveys and sedimentation bars have allowed to measure erosion/sedimentation volumes at the scale of the spit and of sea kale individuals, during spring 2013. Individuals of this species facilitate the trapping of sand, transported by winds from the intertidal flats. Sea kale thus contributes to the maintenance of sand at the surface of the spit during spring (development period of sea kales) and, probably to the progressive silting up of the spit on a longer-term. Thus, sea kale indirectly favours the filling of the bay through the building up and consolidation of the spit that, in turn, enhances sheltered conditions increasing the part of decantation processes in the sedimentation in the bay. (financial support by Région Haute-Normandie and Réseau d'Observation du Littoral Normand et Picard, ROLNP)

DMD: a digital light processing application to projection displays

NASA Astrophysics Data System (ADS)

Feather, Gary A.

1989-01-01

Summary Revolutionary technologies achieve rapid product and subsequent business diffusion only when the in- ventors focus on technology application, maturation, and proliferation. A revolutionary technology is emerg- ing with micro-electromechanical systems (MEMS). MEMS are being developed by leveraging mature semi- conductor processing coupled with mechanical systems into complete, integrated, useful systems. The digital micromirror device (DMD), a Texas Instruments invented MEMS, has focused on its application to projec- tion displays. The DMD has demonstrated its application as a digital light processor, processing and produc- ing compelling computer and video projection displays. This tutorial discusses requirements in the projection display market and the potential solutions offered by this digital light processing system. The seminar in- cludes an evaluation of the market, system needs, design, fabrication, application, and performance results of a system using digital light processing solutions.

Current Status and Recent Research Achievements in SiC/SiC Composites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katoh, Yutai; Snead, Lance L.; Henager, Charles H.

2014-12-01

The development and maturation of the silicon carbide fiber-reinforced silicon carbide matrix (SiC/SiC) composite system for fusion applications has seen the evolution from fundamental development and understanding of the material system and its behavior in a hostile irradiation environment to the current effort which essentially is a broad-based program of technology, directed at moving this material class from a laboratory curiosity to an engineering material. This paper lays out the recent international scientific and technological achievements in the development of SiC/SiC composite material technologies for fusion application and will discuss future research directions. It also reviews the materials system inmore » the larger context of progress to maturity as an engineering material for both the larger nuclear community and for general engineering applications.« less

Motion Imagery Processing and Exploitation (MIPE)

DTIC Science & Technology

2013-01-01

facial recognition —i.e., the identification of a specific person.37 Object detection is often (but not always) considered a prerequisite for instance...The goal of segmentation is to distinguish objects and identify boundaries in images. Some of the earliest approaches to facial recognition involved...methods of instance recognition are at varying levels of maturity. Facial recognition methods are arguably the most mature; the technology is well

JPRS Report, Science & Technology, USSR: Life Sciences.

DTIC Science & Technology

1987-07-28

relationship between knob polymorphism and pollination system. For the majority of cross- pollinated strain 41 plants , the time of stigma maturation ranges...from four to 12 days. However, with artificial selection achieved with self- pollination of plants for early stigma maturation and delayed anther... pollination . High elimination of female plants was noted in generations I~, I- and I,. In conjunction with previously reported alterations and

Swingbed Amine Carbon Dioxide Removal Flight Experiment - Feasibility Study and Concept Development for Cost-Effective Exploration Technology Maturation on The International Space Station

NASA Technical Reports Server (NTRS)

Hodgson, Edward; Papale, William; Nalette, Timothy; Graf, John; Sweterlitsch, Jeffery; Hayley, Elizabeth; Williams, Antony; Button, Amy

2011-01-01

The completion of International Space Station Assembly and transition to a full six person crew has created the opportunity to create and implement flight experiments that will drive down the ultimate risks and cost for human space exploration by maturing exploration technologies in realistic space environments that are impossible or incredibly costly to duplicate in terrestrial laboratories. An early opportunity for such a technology maturation experiment was recognized in the amine swingbed technology baselined for carbon dioxide and humidity control on the Orion spacecraft and Constellation Spacesuit System. An experiment concept using an existing high fidelity laboratory swing bed prototype has been evaluated in a feasibility and concept definition study leading to the conclusion that the envisioned flight experiment can be both feasible and of significant value for NASA s space exploration technology development efforts. Based on the results of that study NASA has proceeded with detailed design and implementation for the flight experiment. The study effort included the evaluation of technology risks, the extent to which ISS provided unique opportunities to understand them, and the implications of the resulting targeted risks for the experiment design and operational parameters. Based on those objectives and characteristics, ISS safety and integration requirements were examined, experiment concepts developed to address them and their feasibility assessed. This paper will describe the analysis effort and conclusions and present the resulting flight experiment concept. The flight experiment, implemented by NASA and launched in two packages in January and August 2011, integrates the swing bed with supporting elements including electrical power and controls, sensors, cooling, heating, fans, air- and water-conserving functionality, and mechanical packaging structure. It is now on board the ISS awaiting installation and activation.

Overview and Summary of the Advanced Mirror Technology Development Project

NASA Astrophysics Data System (ADS)

Stahl, H. P.

2014-01-01

Advanced Mirror Technology Development (AMTD) is a NASA Strategic Astrophysics Technology project to mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review. The developed mirror technology must enable missions capable of both general astrophysics & ultra-high contrast observations of exoplanets. Just as JWST’s architecture was driven by launch vehicle, a future UVOIR mission’s architectures (monolithic, segmented or interferometric) will depend on capacities of future launch vehicles (and budget). Since we cannot predict the future, we must prepare for all potential futures. Therefore, to provide the science community with options, we are pursuing multiple technology paths. AMTD uses a science-driven systems engineering approach. We derived engineering specifications for potential future monolithic or segmented space telescopes based on science needs and implement constraints. And we are maturing six inter-linked critical technologies to enable potential future large aperture UVOIR space telescope: 1) Large-Aperture, Low Areal Density, High Stiffness Mirrors, 2) Support Systems, 3) Mid/High Spatial Frequency Figure Error, 4) Segment Edges, 5) Segment-to-Segment Gap Phasing, and 6) Integrated Model Validation Science Advisory Team and a Systems Engineering Team. We are maturing all six technologies simultaneously because all are required to make a primary mirror assembly (PMA); and, it is the PMA’s on-orbit performance which determines science return. PMA stiffness depends on substrate and support stiffness. Ability to cost-effectively eliminate mid/high spatial figure errors and polishing edges depends on substrate stiffness. On-orbit thermal and mechanical performance depends on substrate stiffness, the coefficient of thermal expansion (CTE) and thermal mass. And, segment-to-segment phasing depends on substrate & structure stiffness. This presentation will introduce the goals and objectives of the AMTD project and summarize its recent accomplishments.

Phenolic and Aroma Composition of White Wines Produced by Prolonged Maceration and Maturation in Wooden Barrels

PubMed Central

Jedrejčić, Nikolina; Ganić, Karin Kovačević; Staver, Mario; Peršurić, Đordano

2015-01-01

Summary To investigate the phenolic and aroma composition of Malvazija istarska (Vitis vinifera L.) white wines produced by an unconventional technology comprising prolonged maceration followed by maturation in wooden barrels, representative samples were subjected to analysis by UV/Vis spectrometry, high-performance liquid chromatography, and gas chromatography-mass spectrometry. When compared to standard wines, the investigated samples contained higher levels of dry extract, volatile acidity, lactic acid, phenols, colour intensity, antioxidant activity, majority of monoterpenes, C13-norisoprenoids, methanol, higher alcohols, ethyl acetate, branched-chain esters and esters of hydroxy and dicarboxylic acids, ethylphenols, furans, and acetals, as well as lower levels of malic acid, β-damascenone, straight-chain fatty acids, ethyl and acetate esters. It was estimated that maceration had a stronger influence on phenols, and maturation on volatile aromas. Despite different vintages and technological details, the investigated wines showed a relative homogeneity in the composition, representing a clear and distinctive type. PMID:27904375

Comparative efficiency and driving range of light- and heavy-duty vehicles powered with biomass energy stored in liquid fuels or batteries

PubMed Central

Laser, Mark; Lynd, Lee R.

2014-01-01

This study addresses the question, “When using cellulosic biomass for vehicular transportation, which field-to-wheels pathway is more efficient: that using biofuels or that using bioelectricity?” In considering the question, the level of assumed technological maturity significantly affects the comparison, as does the intended transportation application. Results from the analysis indicate that for light-duty vehicles, over ranges typical in the United States today (e.g., 560–820 miles), field-to-wheels performance is similar, with some scenarios showing biofuel to be more efficient, and others indicating the two pathways to be essentially the same. Over the current range of heavy-duty vehicles, the field-to-wheels efficiency is higher for biofuels than for electrically powered vehicles. Accounting for technological advances and range, there is little basis to expect mature bioelectricity-powered vehicles to have greater field-to-wheels efficiency (e.g., kilometers per gigajoule biomass or per hectare) compared with mature biofuel-powered vehicles. PMID:24550477

LOX Gene Transcript Accumulation in Olive (Olea europaea L.) Fruits at Different Stages of Maturation: Relationship between Volatile Compounds, Environmental Factors, and Technological Treatments for Oil Extraction

PubMed Central

Muzzalupo, Innocenzo; Macchione, Barbara; Bucci, Cristina; Stefanizzi, Francesca; Perri, Enzo; Chiappetta, Adriana; Tagarelli, Antonio; Sindona, Giovanni

2012-01-01

The quality of olive oil is influenced by genetic and environmental factors and by the maturation state of drupes, but it is equally affected by technological treatments of the process. This work investigates the possible correlation between olive LOX gene transcript accumulation, evaluated in fruits collected at different stages of maturation, and chemical biomarkers of its activity. During olive fruit ripening, the same genotype harvested from two different farms shows a positive linear trend between LOX relative transcript accumulation and the content of volatile compounds present in the olive oil aroma. Interestingly, a negative linear trend was observed between LOX relative transcript accumulation and the content of volatile compounds present in the olive pastes obtained from olive fruits with and without malaxation. The changes in the olive LOX transcript accumulation reveal its environmental regulation and suggest differential physiological functions for the LOXs. PMID:22645430

LOX Gene transcript accumulation in olive (Olea europaea L.) fruits at different stages of maturation: relationship between volatile compounds, environmental factors, and technological treatments for oil extraction.

PubMed

Muzzalupo, Innocenzo; Macchione, Barbara; Bucci, Cristina; Stefanizzi, Francesca; Perri, Enzo; Chiappetta, Adriana; Tagarelli, Antonio; Sindona, Giovanni

2012-01-01

The quality of olive oil is influenced by genetic and environmental factors and by the maturation state of drupes, but it is equally affected by technological treatments of the process. This work investigates the possible correlation between olive LOX gene transcript accumulation, evaluated in fruits collected at different stages of maturation, and chemical biomarkers of its activity. During olive fruit ripening, the same genotype harvested from two different farms shows a positive linear trend between LOX relative transcript accumulation and the content of volatile compounds present in the olive oil aroma. Interestingly, a negative linear trend was observed between LOX relative transcript accumulation and the content of volatile compounds present in the olive pastes obtained from olive fruits with and without malaxation. The changes in the olive LOX transcript accumulation reveal its environmental regulation and suggest differential physiological functions for the LOXs.

Secure and Resilient Cloud Computing for the Department of Defense

DTIC Science & Technology

2015-07-21

that addresses that threat model, and (3) integrate the technology into a usable, secure, resilient cloud test bed. Underpinning this work is the...risks for the DoD’s acquisition of secure, resilient cloud technology by providing proofs of concept, technology maturity, integration demonstrations...we need a strategy for integrating LLSRC technology with the cloud services and applications that need to be secured. The LLSRC integration

Autonomous Rendezvous and Docking Conference, volume 1

NASA Technical Reports Server (NTRS)

1990-01-01

This document consists of the presentation submitted at the Autonomous Rendezvous and Docking (ARD) Conference. It contains three volumes: ARD hardware technology; ARD software technology; and ARD operations. The purpose of this conference is to identify the technologies required for an on orbit demonstration of the ARD, assess the maturity of these technologies, and provide the necessary insight for a quality assessment of the programmatic management, technical, schedule, and cost risks.

Autonomous Rendezvous and Docking Conference, volume 3

NASA Technical Reports Server (NTRS)

1990-01-01

This document consists of the presentation submitted at the Autonomous Rendezvous and Docking (ARD) Conference. The document contains three volumes: ARD hardware technology; ARD software technology; and ARD operations. The purpose of this conference is to identify the technologies required for an on orbit demonstration of ARD, assess the maturity of these technologies, and provide the necessary insight for a quality assessment of programmatic management, technical, schedule, and cost risks.

Status and outlook of CFD technology at Mitsubishi Heavy Industries, Nagoya

NASA Astrophysics Data System (ADS)

Tanioka, Tadayuki

1990-09-01

Computational Fluid Dynamics (CFD) technology has made tremendous progress in the last several years. It has matured to become a practical simulation tool in aircraft industries. In MHI, CFD has become an indispensible tool for aerodynamic design aerospace vehicles. The present status is described of this advanced technology at MHI. Also mentioned are some future advances of the fast growing technology as well as associated hardware requirements.

Engineering Specification for Large-aperture UVO Space Telescopes Derived from Science Requirements

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Postman, Marc; Smith, W. Scott

2013-01-01

The Advance Mirror Technology Development (AMTD) project is a three year effort initiated in FY12 to mature by at least a half TRL step six critical technologies required to enable 4 to 8 meter UVOIR space telescope primary mirror assemblies for both general astrophysics and ultra-high contrast observations of exoplanets. AMTD uses a science-driven systems engineering approach. We mature technologies required to enable the highest priority science AND result in a high-performance low-cost low-risk system. To provide the science community with options, we are pursuing multiple technology paths. We have assembled an outstanding team from academia, industry, and government with extensive expertise in astrophysics and exoplanet characterization, and in the design/manufacture of monolithic and segmented space telescopes. A key accomplishment is deriving engineering specifications for advanced normal-incidence monolithic and segmented mirror systems needed to enable both general astrophysics and ultra-high contrast observations of exoplanets missions as a function of potential launch vehicles and their mass and volume constraints.

AMTD: update of engineering specifications derived from science requirements for future UVOIR space telescopes

NASA Astrophysics Data System (ADS)

Stahl, H. Philip; Postman, Marc; Mosier, Gary; Smith, W. Scott; Blaurock, Carl; Ha, Kong; Stark, Christopher C.

2014-08-01

The Advance Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort, initiated in FY12, to mature by at least a half TRL step six critical technologies required to enable 4 meter or larger UVOIR space telescope primary mirror assemblies for both general astrophysics and ultra-high contrast observations of exoplanets. AMTD uses a science-driven systems engineering approach. We mature technologies required to enable the highest priority science AND provide a high-performance low-cost low-risk system. To give the science community options, we are pursuing multiple technology paths. A key task is deriving engineering specifications for advanced normal-incidence monolithic and segmented mirror systems needed to enable both general astrophysics and ultra-high contrast observations of exoplanets missions as a function of potential launch vehicles and their mass and volume constraints. A key finding of this effort is that the science requires an 8 meter or larger aperture telescope.

Bioprinting: an assessment based on manufacturing readiness levels.

PubMed

Wu, Changsheng; Wang, Ben; Zhang, Chuck; Wysk, Richard A; Chen, Yi-Wen

2017-05-01

Over the last decade, bioprinting has emerged as a promising technology in the fields of tissue engineering and regenerative medicine. With recent advances in additive manufacturing, bioprinting is poised to provide patient-specific therapies and new approaches for tissue and organ studies, drug discoveries and even food manufacturing. Manufacturing Readiness Level (MRL) is a method that has been applied to assess manufacturing maturity and to identify risks and gaps in technology-manufacturing transitions. Technology Readiness Level (TRL) is used to evaluate the maturity of a technology. This paper reviews recent advances in bioprinting following the MRL scheme and addresses corresponding MRL levels of engineering challenges and gaps associated with the translation of bioprinting from lab-bench experiments to ultimate full-scale manufacturing of tissues and organs. According to our step-by-step TRL and MRL assessment, after years of rigorous investigation by the biotechnology community, bioprinting is on the cusp of entering the translational phase where laboratory research practices can be scaled up into manufacturing products specifically designed for individual patients.

AMTD: Update of Engineering Specifications Derived from Science Requirements for Future UVOIR Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Postman, Marc; Mosier, Gary; Smith, W. Scott; Blaurock, Carl; Ha, Kong; Stark, Christopher C.

2014-01-01

The Advance Mirror Technology Development (AMTD) project is in Phase 2 of a multiyear effort, initiated in FY12, to mature by at least a half TRL step six critical technologies required to enable 4 meter or larger UVOIR space telescope primary mirror assemblies for both general astrophysics and ultra-high contrast observations of exoplanets. AMTD uses a science-driven systems engineering approach. We mature technologies required to enable the highest priority science AND provide a high-performance low-cost low-risk system. To give the science community options, we are pursuing multiple technology paths. A key task is deriving engineering specifications for advanced normal-incidence monolithic and segmented mirror systems needed to enable both general astrophysics and ultra-high contrast observations of exoplanets missions as a function of potential launch vehicles and their mass and volume constraints. A key finding of this effort is that the science requires an 8 meter or larger aperture telescope

Integrated System Health Management (ISHM) Technology Demonstration Project Final Report

NASA Technical Reports Server (NTRS)

Mackey, Ryan; Iverson, David; Pisanich, Greg; Toberman, Mike; Hicks, Ken

2006-01-01

Integrated System Health Management (ISHM) is an essential capability that will be required to enable upcoming explorations mission systems such as the Crew Exploration Vehicle (CEV) and Crew Launch Vehicle (CLV), as well as NASA aeronautics missions. However, the lack of flight experience and available test platforms have held back the infusion by NASA Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) of ISHM technologies into future space and aeronautical missions. To address this problem, a pioneer project was conceived to use a high-performance aircraft as a low-cost proxy to develop, mature, and verify the effectiveness of candidate ISHM technologies. Given the similarities between spacecraft and aircraft, an F/A-18 currently stationed at Dryden Flight Research Center (DFRC) was chosen as a suitable host platform for the test bed. This report describes how the test bed was conceived, how the technologies were integrated on to the aircraft, and how these technologies were matured during the project. It also describes the lessons learned during the project and a forward path for continued work.

Treatment of mature landfill leachate by internal micro-electrolysis integrated with coagulation: a comparative study on a novel sequencing batch reactor based on zero valent iron.

PubMed

Ying, Diwen; Peng, Juan; Xu, Xinyan; Li, Kan; Wang, Yalin; Jia, Jinping

2012-08-30

A comparative study of treating mature landfill leachate with various treatment processes was conducted to investigate whether the method of combined processes of internal micro-electrolysis (IME) without aeration and IME with full aeration in one reactor was an efficient treatment for mature landfill leachate. A specifically designed novel sequencing batch internal micro-electrolysis reactor (SIME) with the latest automation technology was employed in the experiment. Experimental data showed that combined processes obtained a high COD removal efficiency of 73.7 ± 1.3%, which was 15.2% and 24.8% higher than that of the IME with and without aeration, respectively. The SIME reactor also exhibited a COD removal efficiency of 86.1 ± 3.8% to mature landfill leachate in the continuous operation, which is much higher (p<0.05) than that of conventional treatments of electrolysis (22.8-47.0%), coagulation-sedimentation (18.5-22.2%), and the Fenton process (19.9-40.2%), respectively. The innovative concept behind this excellent performance is a combination effect of reductive and oxidative processes of the IME, and the integration electro-coagulation. Optimal operating parameters, including the initial pH, Fe/C mass ratio, air flow rate, and addition of H(2)O(2), were optimized. All results show that the SIME reactor is a promising and efficient technology in treating mature landfill leachate. Copyright © 2012 Elsevier B.V. All rights reserved.

Exterior Weathering Durability of Some Leach-Resistant Fire-Retardant Treatments for Wood Shingles: A Five-Year Report.

DTIC Science & Technology

1981-07-01

phos. Code 29 impregnation phonium chloride (90%. in water) 12.5.5%, sodium hydroxide 150%. in water) 2.16%, urea 2.06/%, a liquid melamine 4.35...1.08%.. dicyandlamide 4.54%. (9) impregnation formaldehyde (37%) 4.32%. phosphoric acid 7.06%. water $3.0%. UOFP_2 Pressure Treating solution: Urea 1.44...sodium hydroxide (500o in water) 0.8710, urea 0.800o. a liquid melamine 1.74°o, water 91.570 o. 29 Pressure impregnation Treating solution: Tetrakis

Pediatric Patient with a Rash

PubMed Central

Sutton, Jared; Walsh, Ryan; Franklin, Jillian

2014-01-01

A 2 year old fully immunized male with no personal history of chicken pox presented to the emergency department with a chief complaint of a rash for one week after returning from a hiking trip in a remote island in Canada. After initially being diagnosed with contact dermatitis, a diagnosis of herpes zoster was made by confirmatory viral polymerase chain reaction testing. The purpose of this case report is to examine the literature for the incidence and etiology of shingles in children without a prior history of a primary varicella rash outbreak. PMID:25035735

L10 FePtCu bit patterned media

NASA Astrophysics Data System (ADS)

Brombacher, C.; Grobis, M.; Lee, J.; Fidler, J.; Eriksson, T.; Werner, T.; Hellwig, O.; Albrecht, M.

2012-01-01

Chemically ordered 5 nm-thick L10 FePtCu films with strong perpendicular magnetic anisotropy were post-patterned by nanoimprint lithography into a dot array over a 3 mm-wide circumferential band on a 3 inch Si wafer. The dots with a diameter of 30 nm and a center-to-center pitch of 60 nm appear as single domain and reveal an enhanced switching field as compared to the continuous film. We demonstrate successful recording on a single track using shingled writing with a conventional hard disk drive write/read head.

Test and evaluation of the attic temperature reduction potential of plastic roof shakes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holton, J.K.; Beggs, T.R.

1999-07-01

While monitoring the comparative performance of two test houses in Pittsburgh, Pennsylvania, it was noticed that the attic air temperature of one house with a plastic shake roof was consistently 20 F (11 C) cooler than its twin with asphalt shingles during peak summer cooling periods. More detailed monitoring of the temperatures on the plastic shake, the roof deck, and the attic showed this effect to be largely due to the plastic shake and not to better roof venting or other heat loss mechanisms.

Air sparging in low permeability soils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marley, M.C.

1996-08-01

Sparging technology is rapidly growing as a preferred, low cost remediation technique of choice at sites across the United States. The technology is considered to be commercially available and relatively mature. However, the maturity is based on the number of applications of the technology as opposed to the degree of understanding of the mechanisms governing the sparging process. Few well documented case studies exist on the long term operation of the technology. Sparging has generally been applied using modified monitoring well designs in uniform, coarse grained soils. The applicability of sparging for the remediation of DNAPLs in low permeability mediamore » has not been significantly explored. Models for projecting the performance of sparging systems in either soils condition are generally simplistic but can be used to provide general insight into the effects of significant changes in soil and fluid properties. The most promising sparging approaches for the remediation of DNAPLs in low permeability media are variations or enhancements to the core technology. Recirculatory sparging systems, sparging/biosparging trenches or curtains and heating or induced fracturing techniques appear to be the most promising technology variants for this type of soil. 21 refs., 9 figs.« less

NASA's Advanced Space Transportation Hypersonic Program

NASA Technical Reports Server (NTRS)

Hueter, Uwe; McClinton, Charles; Cook, Stephen (Technical Monitor)

2002-01-01

NASA's has established long term goals for access-to-space. NASA's third generation launch systems are to be fully reusable and operational in approximately 25 years. The goals for third generation launch systems are to reduce cost by a factor of 100 and improve safety by a factor of 10,000 over current conditions. The Advanced Space Transportation Program Office (ASTP) at NASA's Marshall Space Flight Center in Huntsville, AL has the agency lead to develop third generation space transportation technologies. The Hypersonics Investment Area, part of ASTP, is developing the third generation launch vehicle technologies in two main areas, propulsion and airframes. The program's major investment is in hypersonic airbreathing propulsion since it offers the greatest potential for meeting the third generation launch vehicles. The program will mature the technologies in three key propulsion areas, scramjets, rocket-based combined cycle and turbine-based combination cycle. Ground and flight propulsion tests are being planned for the propulsion technologies. Airframe technologies will be matured primarily through ground testing. This paper describes NASA's activities in hypersonics. Current programs, accomplishments, future plans and technologies that are being pursued by the Hypersonics Investment Area under the Advanced Space Transportation Program Office will be discussed.

Sugars levels of four sugarcane genotypes in different stem portions during the maturation phase.

PubMed

Pereira, Laís F M; Ferreira, Vilma M; Oliveira, Nelson G DE; Sarmento, Pedro L V S; Endres, Laurício; Teodoro, Iêdo

2017-01-01

Maturation is a characteristic of sugarcane plant (Saccharum spp.) and even when grown under the same soil and climate conditions the varieties differ on the maturation curve. Thus, studies that allow establishing maturation curves of different sugarcane genotypes in the local soil and climate may indicate the proper harvesting period to ensure better quality of the raw material. This study aimed to analyze the levels of soluble sugars during the maturation phase and assess the technological and productivity indexes of four irrigated sugarcane genotypes in the region of Rio Largo, Alagoas. The experiment was conducted in randomized blocks in a 4 x 2 x 5 factorial: four genotypes (RB92579, RB98710, RB99395 and RB961003), two stem portions (internodes 1-4 and internodes 5-8) and five seasons (82, 49, 25, 13 and 3 days before harvesting), each treatment with three replications. Internodes 1-4 showed the highest levels of reducing sugars, while the largest accumulation of sucrose and total soluble solids occurred in internodes 5-8. RB99395 genotype showed more stability in the sugar levels during sugarcane maturation, which can indicate early maturation and high agricultural yield.

RECENT ADVANCES IN ION EXCHANGE MATERIALS AND PROCESSES FOR POLLUTION PREVENTION

EPA Science Inventory

The goal of this article was to summarize the recent advances in ion exchange technology for the metal finishing industry. Even though the ion exchange technology is mature and is widely employed in the industry, new applications, approaches and ion exchange materials are emergi...

2.0 AEDL Systems Engineering

NASA Technical Reports Server (NTRS)

Graves, Claude

2005-01-01

Some engineering topics: Some Initial Thoughts. Capability Description. Capability State-of-the-Art. Capability Requirements. Systems Engineering. Capability Roadmap. Capability Maturity. Candidate Technologies. Metrics.

Electronegative Gas Thruster - Direct Thrust Measurement Project

NASA Technical Reports Server (NTRS)

Dankanich, John (Principal Investigator); Aanesland, Ane; Polzin, Kurt; Walker, Mitchell

2015-01-01

This effort is an international collaboration and academic partnership to mature an innovative electric propulsion (EP) thruster concept to TRL 3 through direct thrust measurement. The initial target application is for Small Satellites, but can be extended to higher power. The Plasma propulsion with Electronegative GASES (PEGASES) concept simplifies ion thruster operation, eliminates a neutralizer requirement and should yield longer life capabilities and lower cost implementation over conventional gridded ion engines. The basic proof-of concept has been demonstrated and matured to TRL 2 over the past several years by researchers at the Laboratoire de Physique des Plasma in France. Due to the low maturity of the innovation, there are currently no domestic investments in electronegative gas thrusters anywhere within NASA, industry or academia. The end product of this Center Innovation Fund (CIF) project will be a validation of the proof-of-concept, maturation to TRL 3 and technology assessment report to summarize the potential for the PEGASES concept to supplant the incumbent technology. Information exchange with the foreign national will be one-way with the exception of the test results. Those test results will first go through a standard public release ITAR/export control review, and the results will be presented in a public technical forum, and the results will be presented in a public technical forum.

The effect of the addition of cow brain powder in commercial feed on the gonadal maturity of comet goldfish (Carassius auratus auratus)

NASA Astrophysics Data System (ADS)

Andriani, Y.; Subhan, U.; Rosidah; Iskandar; Zidni, I.; Abdillah, A. M.

2018-04-01

The aim of this research was to analysis the effect of addition bovine’s brain meal in artificial feed on gonad maturity and to find out the best time of gonad maturity in comet fish.This research was conducted at Fourth Building Hatchery Faculty of Fisheries and Marine Sciences Padjadjaran University on November 2014 until Januari 2015. Freeze drying of bovine brain was conducted at Research Center Inter University Bandung Institute of Technology. The research was using Completely Randomized Design (CRD) with four treatments and three replications.The treatment were 20 mg/kg, 35 mg/kg, 50mg/kg and control. The parameters of this research are Gonado Somatic Index (GSI) and egg maturity level. Addition of bovine brain meal in feed with the dose of 50 mg/kg are giving the best result until 45 days of the care time against gonad maturity of comet fish with GSI result 12.93 %, egg maturity level ripe phase 21.115 and fecundity 1520 grain/g.

Active optics as enabling technology for future large missions: current developments for astronomy and Earth observation at ESA

NASA Astrophysics Data System (ADS)

Hallibert, Pascal

2017-09-01

In recent years, a trend for higher resolution has increased the entrance apertures of future optical payloads for both Astronomy and Earth Observation most demanding applications, resulting in new opto-mechanical challenges for future systems based on either monolithic or segmented large primary mirrors. Whether easing feasibility and schedule impact of tight manufacturing and integration constraints or correcting mission-critical in-orbit and commissioning effects, Active Optics constitutes an enabling technology for future large optical space instruments at ESA and needs to reach the necessary maturity in time for future mission selection and implementation. We present here a complete updated overview of our current R and D activities in this field, ranging from deformable space-compatible components to full correction chains including wavefront sensing as well as control and correction algorithms. We share as well our perspectives on the way-forward to technological maturity and implementation within future missions.

Current status and recent research achievements in SiC/SiC composites

NASA Astrophysics Data System (ADS)

Katoh, Y.; Snead, L. L.; Henager, C. H.; Nozawa, T.; Hinoki, T.; Iveković, A.; Novak, S.; Gonzalez de Vicente, S. M.

2014-12-01

The silicon carbide fiber-reinforced silicon carbide matrix (SiC/SiC) composite system for fusion applications has seen a continual evolution from development a fundamental understanding of the material system and its behavior in a hostile irradiation environment to the current effort which is directed at a broad-based program of technology maturation program. In essence, over the past few decades this material system has steadily moved from a laboratory curiosity to an engineering material, both for fusion structural applications and other high performance application such as aerospace. This paper outlines the recent international scientific and technological achievements towards the development of SiC/SiC composite material technologies for fusion application and discusses future research directions. It also reviews the materials system in the larger context of progress to maturity as an engineering material for both the larger nuclear community and broader engineering applications.

Critical issues in telemedicine.

PubMed

Bashshur, R L

1997-01-01

Critical issues facing the development of telemedicine today are described and analyzed as dilemmas or paradoxes. The technological dilemma involves the difficult choice between using the latest technology regardless of how well it fits specific needs on the one hand, and the reluctance to capitalize on the available technological capability to create efficient and effective organizations for expanding the reach of health care on the other hand. The evaluation paradox points to the disjuncture between policy making requirements and the scientific enterprise. This engenders the difficulty of producing scientifically valid and policy relevant results from programs that have not achieved maturity or a steady state of operation. The contextual hazards of limiting the scope of telemedicine to rural areas are discussed, as well as the potential for creating a second tier of care for the remote and isolated populations. Finally, professional maturation is addressed as it underscores the importance of self regulation and control.

Assessing the maturity and re-usability of NASA's Advanced Information System Technology (AIST) Projects

NASA Astrophysics Data System (ADS)

Little, M. M.; Hines, K.

2016-12-01

Considerable funding has been invested in Earth science information technology (IT) projects by NASA over the past 15 years. While many of these projects succeeded at completing their objectives, rapid improvements in technology and growth in available data could further enhance the capabilities available to the Earth science community. Independent evaluation of these projects has become more and more important. Not only do they qualify the maturity of the work, but they give potential adopters the chance to kick the tires. One approach that has been used is to task Federally Funded Research and Development Corporations (FFRDC) with reviews and paper studies. Another approach involves field testing by third parties. Over the past three years, the AIST Program has tried both. This paper will describe both approaches and lessons learned from the experiences. The audience will be asked for their suggestions as to how to qualify and value these results.

Evolution of Requirements and Assumptions for Future Exploration Missions

NASA Technical Reports Server (NTRS)

Anderson, Molly; Sargusingh, Miriam; Perry, Jay

2017-01-01

NASA programs are maturing technologies, systems, and architectures to enabling future exploration missions. To increase fidelity as technologies mature, developers must make assumptions that represent the requirements of a future program. Multiple efforts have begun to define these requirements, including team internal assumptions, planning system integration for early demonstrations, and discussions between international partners planning future collaborations. For many detailed life support system requirements, existing NASA documents set limits of acceptable values, but a future vehicle may be constrained in other ways, and select a limited range of conditions. Other requirements are effectively set by interfaces or operations, and may be different for the same technology depending on whether the hard-ware is a demonstration system on the International Space Station, or a critical component of a future vehicle. This paper highlights key assumptions representing potential life support requirements and explanations of the driving scenarios, constraints, or other issues that drive them.

Emerging Propulsion Technologies

NASA Technical Reports Server (NTRS)

Keys, Andrew S.

2006-01-01

The Emerging Propulsion Technologies (EPT) investment area is the newest area within the In-Space Propulsion Technology (ISPT) Project and strives to bridge technologies in the lower Technology Readiness Level (TRL) range (2 to 3) to the mid TRL range (4 to 6). A prioritization process, the Integrated In-Space Transportation Planning (IISTP), was developed and applied in FY01 to establish initial program priorities. The EPT investment area emerged for technologies that scored well in the IISTP but had a low technical maturity level. One particular technology, the Momentum-eXchange Electrodynamic-Reboost (MXER) tether, scored extraordinarily high and had broad applicability in the IISTP. However, its technical maturity was too low for ranking alongside technologies like the ion engine or aerocapture. Thus MXER tethers assumed top priority at EPT startup in FY03 with an aggressive schedule and adequate budget. It was originally envisioned that future technologies would enter the ISP portfolio through EPT, and EPT developed an EPT/ISP Entrance Process for future candidate ISP technologies. EPT has funded the following secondary, candidate ISP technologies at a low level: ultra-lightweight solar sails, general space/near-earth tether development, electrodynamic tether development, advanced electric propulsion, and in-space mechanism development. However, the scope of the ISPT program has focused over time to more closely match SMD needs and technology advancement successes. As a result, the funding for MXER and other EPT technologies is not currently available. Consequently, the MXER tether tasks and other EPT tasks were expected to phased out by November 2006. Presentation slides are presented which provide activity overviews for the aerocapture technology and emerging propulsion technology projects.

Technology sensitivity studies for a Mach 3.0 civil transport

NASA Technical Reports Server (NTRS)

Coen, Peter G.

1988-01-01

The level of technological sophistication required for the economic viability and environmental acceptability of a Mach 3.0-cruise SST is evaluated, with a view to the development schedule and initial operating date into which the maturity of various essential technologies will translate. Attention is given to the effect of advanced aerodynamic, propulsion, structural and subsystem technologies on takeoff gross weight. A dramatic impact is noted to result from the combination of prospective technological advances in flow laminarization, advanced structures and materials, etc.

An Analysis of Student Hypermedia Navigation and Learning

ERIC Educational Resources Information Center

Epp, Erik Minh

2010-01-01

As society's interactions with web technology mature from novelty to familiarity and finally into transparence for users, it becomes important to reexamine what modern students are taking from their experiences with educational technology. Students in a physical chemistry laboratory course interacted with a hypermedia learning environment as part…

Technology Project Learning versus Lab Experimentation

ERIC Educational Resources Information Center

Waks, S.; Sabag, N.

2004-01-01

The Project-Based Learning (PBL) approach enables the student to construct knowledge in his/her own way. Piaget, the founder of constructivism, saw the development of intelligence as a process involving the relationship between brain maturity and individual experience. The technology PBL (TPBL) approach confronts the student with a personal…

An Innovative Flexible Program for Rural Women.

ERIC Educational Resources Information Center

Wooller, Judith; Warner, Lesley

Central Queensland University's Women into Science and Technology program aimed to broaden the access of women to higher education, improve their career opportunities and employment prospects, and address the personnel shortage in engineering and technology by encouraging mature age women to consider these fields. The distance learning program was…

Review of storage battery system cost estimates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, D.R.; Russell, J.A.

1986-04-01

Cost analyses for zinc bromine, sodium sulfur, and lead acid batteries were reviewed. Zinc bromine and sodium sulfur batteries were selected because of their advanced design nature and the high level of interest in these two technologies. Lead acid batteries were included to establish a baseline representative of a more mature technology.

Applying systems engineering methodologies to the micro- and nanoscale realm

NASA Astrophysics Data System (ADS)

Garrison Darrin, M. Ann

2012-06-01

Micro scale and nano scale technology developments have the potential to revolutionize smart and small systems. The application of systems engineering methodologies that integrate standalone, small-scale technologies and interface them with macro technologies to build useful systems is critical to realizing the potential of these technologies. This paper covers the expanding knowledge base on systems engineering principles for micro and nano technology integration starting with a discussion of the drivers for applying a systems approach. Technology development on the micro and nano scale has transition from laboratory curiosity to the realization of products in the health, automotive, aerospace, communication, and numerous other arenas. This paper focuses on the maturity (or lack thereof) of the field of nanosystems which is emerging in a third generation having transitioned from completing active structures to creating systems. The emphasis of applying a systems approach focuses on successful technology development based on the lack of maturity of current nano scale systems. Therefore the discussion includes details relating to enabling roles such as product systems engineering and technology development. Classical roles such as acquisition systems engineering are not covered. The results are also targeted towards small-scale technology developers who need to take into account systems engineering processes such as requirements definition, verification, and validation interface management and risk management in the concept phase of technology development to maximize the likelihood of success, cost effective micro and nano technology to increase the capability of emerging deployed systems and long-term growth and profits.

An Overview Of NASA's Solar Sail Propulsion Project

NASA Technical Reports Server (NTRS)

Garbe, Gregory; Montgomery, Edward E., IV

2003-01-01

Research conducted by the In-Space Propulsion (ISP) Technologies Projects is at the forefront of NASA's efforts to mature propulsion technologies that will enable or enhance a variety of space science missions. The ISP Program is developing technologies from a Technology Readiness Level (TRL) of 3 through TRL 6. Activities under the different technology areas are selected through the NASA Research Announcement (NRA) process. The ISP Program goal is to mature a suite of reliable advanced propulsion technologies that will promote more cost efficient missions through the reduction of interplanetary mission trip time, increased scientific payload mass fraction, and allowing for longer on-station operations. These propulsion technologies will also enable missions with previously inaccessible orbits (e.g., non-Keplerian, high solar latitudes). The ISP Program technology suite has been prioritized by an agency wide study. Solar Sail propulsion is one of ISP's three high-priority technology areas. Solar sail propulsion systems will be required to meet the challenge of monitoring and predicting space weather by the Office of Space Science s (OSS) Living with a Star (LWS) program. Near-to-mid-term mission needs include monitoring of solar activity and observations at high solar latitudes. Near-term work funded by the ISP solar sail propulsion project is centered around the quantitative demonstration of scalability of present solar sail subsystem designs and concepts to future mission requirements through ground testing, computer modeling and analytical simulations. This talk will review the solar sail technology roadmap, current funded technology development work, future funding opportunities, and mission applications.

An industry update: the latest developments in therapeutic delivery.

PubMed

Simpson, Iain

2017-02-01

This Industry Update covers the period from 1 October through to 31 October 2016, and is based on information sourced from company press releases, scientific literature, patents and various news websites. The month saw several news items covering drug-delivery devices, including a new sensor to monitor and support the use of inhalers; launch in the UK of a new autoinjector for Cimzia ® , UCB's rheumatoid arthritis drug; and approval of Roche's Lucentis ® in a prefilled syringe. Research was also published to show the value of continuous blood pressure monitoring in dementia management. Astellas announced the acquisition of German pharmaceutical company Ganymed while Sunovion completed its purchase of Cynapsus. A new EU-funded collaboration was announced looking at the value of PET-based biomarkers in Alzheimer's disease. GSK gained USA approval for its shingles vaccine, but Novo Nordisk and Sanofi received complete response letters from the US FDA, requiring further information before regulatory review of their drug submissions can be completed. The UK's NICE concluded that a drug marketed by BMS to treat a common type of lung cancer was not cost-effective and Cornell University announced results showing that its nanoparticle technology, originally developed as a tumor biomarker, could be effective in directly treating the disease.

NASA ESTO Lidar Technologies Investment Strategy: 2016 Decadal Update

NASA Technical Reports Server (NTRS)

Valinia, Azita; Komar, George J.; Tratt, David M.; Lotshaw, William T.; Gaab, Kevin M.

2016-01-01

The NASA Earth Science Technology Office (ESTO) recently updated its investment strategy in the area of lidar technologies as it pertains to NASA's Earth Science measurement goals in the next decade. The last ESTO lidar strategy was documented in 2006. The current (2016) report assesses the state-of-the-art in lidar technologies a decade later. Lidar technology maturation in the past decade has been evaluated, and the ESTO investment strategy is updated and laid out in this report according to current NASA Earth science measurement needs and new emerging technologies.

NASA ESTO Lidar Technologies Investment Strategy: 2016 Decadal Update

NASA Technical Reports Server (NTRS)

Valinia, Azita; Komar, George J.; Tratt, David M.; Lotshaw, William; Gaab, Kevin; Mayo, David

2016-01-01

The NASA Earth Science Technology Office (ESTO) recently updated its investment strategy in the area of lidar technologies as it pertains to NASAs Earth Science measurement goals in the next decade. The last ESTO lidar strategy was documented in 2006. The current (2016) report assesses the state-of-the-art in lidar technologies a decade later. Lidar technology maturation in the past decade has been evaluated, and the ESTO investment strategy is updated and laid out in this report according to current NASA Earth science measurement needs and new emerging technologies.

NASA ESTO Lidar Technologies Investment Strategy: 2016 Decadal Update

NASA Technical Reports Server (NTRS)

Valinia, Azita; Komar, George J.; Tratt, David M.; Lotshaw, William T.; Gaab, Kevin M.

2017-01-01

The NASA Earth Science Technology Office (ESTO) recently updated its investment strategy in the area of lidar technologies as it pertains to NASA's Earth Science measurement goals in the next decade. The last ESTO lidar strategy was documented in 2006. The current (2016) report assesses the state-of-the-art in lidar technologies a decade later. Lidar technology maturation in the past decade has been evaluated, and the ESTO investment strategy is updated and laid out in this report according to current NASA Earth science measurement needs and new emerging technologies.

Shingrix: The New Adjuvanted Recombinant Herpes Zoster Vaccine.

PubMed

James, Stephanie F; Chahine, Elias B; Sucher, Allana J; Hanna, Cassandra

2018-02-01

To review the immunogenicity, efficacy, and safety of the herpes zoster subunit vaccine (HZ/su) for use in adult patients for the prevention of shingles. A literature search through PubMed was conducted (June 2008 to October 2017) using the terms shingles vaccine and varicella zoster virus. References from retrieved articles and the prescribing information were also reviewed for any additional material. The literature search was limited to human studies published in English. Randomized controlled, multicenter trials were reviewed and included to evaluate the safety and efficacy of HZ/su. Literature on the epidemiology and pathology of herpes zoster virus infections and recommendations from the Advisory Committee on Immunization Practices (ACIP) were also reviewed. HZ/su is a new adjuvanted recombinant vaccine approved by the Food and Drug Administration for the prevention of herpes zoster in adults 50 years of age and older. HZ/su significantly reduced the risk of developing herpes zoster by more than 90% as compared with placebo and displayed a comparable adverse effect profile. The most common local adverse events were injection site pain, redness, and swelling, and the most common systemic adverse events were myalgia, fatigue, and headache. The ACIP recommends the routine use of HZ/su as the preferred vaccine for the prevention of herpes zoster in immunocompetent adults 50 years of age and older. Based on published immunogenicity, efficacy, and safety data, as well as the recent recommendations by the ACIP, HZ/su should be included on both hospital and community pharmacy formularies and recommended to all immunocompetent patients older than 50 years to prevent herpes zoster.

A Study of the Energy-Saving Potential of Metal Roofs Incorporating Dynamic Insulation Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biswas, Kaushik; Miller, William A; Kriner, Scott

2013-01-01

This article presents various metal roof configurations that were tested at Oak Ridge National Laboratory in Tennessee, U.S. between 2009 and 2013, and describes their potential for reducing the attic-generated space-conditioning loads. These roofs contained different combinations of phase-change material, rigid insulation, low emittance surface, and above-sheathing ventilation with standing-seam metal panels on top. These roofs were designed to be installed on existing roofs decks, or on top of asphalt shingles for retrofit construction. All the tested roofs showed the potential for substantial energy savings compared to an asphalt shingle roof, which was used as a control for comparison. Themore » roofs were constructed on a series of adjacent attics separated at the gables using thick foam insulation. The attics were built on top of a conditioned room. All attics were vented at the soffit and ridge. The test roofs and attics were instrumented with an array of thermocouples. Heat flux transducers were installed in the roof deck and attic floor (ceiling) to measure the heat flows through the roof and between the attic and conditioned space below. Temperature and heat flux data were collected during the heating, cooling and swing seasons over a three-year period. Data from previous years of testing have been published. Here, data from the latest roof configurations being tested in year three of the project are presented. All test roofs were highly effective in reducing the heat flows through the roof and ceiling, and in reducing the diurnal attic-temperature fluctuations.« less

Practical issues for using solar-reflective materials to mitigate urban heat islands

NASA Astrophysics Data System (ADS)

Bretz, Sarah; Akbari, Hashem; Rosenfeld, Arthur

Solar-reflective or high-albedo, alternatives to traditionally absorptive urban surfaces such as rooftops and roadways can reduce cooling energy use and improve urban air quality at almost no cost. This paper presents information to support programs that mitigate urban heat islands with solar-reflective surfaces: estimates of the achievable increase in albedo for a variety of surfaces, issues related to the selection of materials and costs and benefits of using them. As an example, we present data for Sacramento, California. In Sacramento, we estimate that 20% of the 96 square mile area is dark roofing and 10% is dark pavement. Based on the change in albedo that is achievable for these surfaces, the overall albedo of Sacramento could be increased by 18%, a change that would produce significant energy savings and increase comfort within the city. Roofing market data indicate which roofing materials should be targeted for incentive programs. In 1995, asphalt shingle was used for over 65% of residential roofing area in the U.S. and 6% of commercial. Built-up roofing was used for about 5% of residential roofing and about 30% of commercial roofing. Single-ply membranes covered about 9% of the residential roofing area and over 30% of the commercial area. White, solar-reflective alternatives are presently available for these roofing materials but a low- first-cost, solar-reflective alternative to asphalt shingles is needed to capture the sloped-roof market. Since incoming solar radiation has a large non-visible component, solar-reflective materials can also be produced in a variety of colors.

Investigation of the proposed solar-driven moisture phenomenon in asphalt shingle roofs

DOE PAGES

Boudreaux, Philip; Pallin, Simon; Jackson, Roderick

2016-01-19

We report that unvented, sealed or conditioned attics are an energy efficiency measure to reduce the thermal load of the home and decrease the space conditioning energy consumption. This retrofit is usually done by using spray polyurethane foam underneath the roof sheathing and on the gables and soffits of an attic to provide a thermal and air barrier. Unvented attics perform well from this perspective but from a moisture perspective sometimes the unvented attic homes have high interior humidity or moisture damage to the roof. As homes become more air tight and energy efficient, an understanding of the hygrothermal dynamicsmore » of the home become more important. One proposed reason for high unvented attic humidity has been that moisture can come through the asphalt shingle roof system and increase the moisture content of the roof sheathing and attic air. This has been called solar driven moisture. Oak Ridge National Laboratory (ORNL) investigated this proposed phenomenon by examining the physical properties of a roof and the physics required for the phenomenon. Results showed that there are not favorable conditions for solar driven moisture to occur. ORNL also conducted an experimental study on an unvented attic home and compared the humidity below the roof sheathing before and after a vapor impermeable underlayment was installed. There was no statistically significant difference in absolute humidity before and after the vapor barrier was installed. Finally, the outcome of the theoretical and experimental study both suggest that solar driven moisture does not occur in any significant amount.« less

Information Technology. DOD Needs to Strengthen Management of Its Statutorily Mandated Software and System Process Improvement Efforts

DTIC Science & Technology

2009-09-01

NII)/CIO Assistant Secretary of Defense for Networks and Information Integration/Chief Information Officer CMMI Capability Maturity Model...a Web-based portal to share knowledge about software process-related methodologies, such as the SEI’s Capability Maturity Model Integration ( CMMI ...19 SEI’s IDEALSM model, and Lean Six Sigma.20 For example, the portal features content areas such as software acquisition management, the SEI CMMI

Overview and Summary of Advanced UVOIR Mirror Technology Development (AMTD) Project

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2014-01-01

ASTRO2010 Decadal Survey stated that an advanced large-aperture ultraviolet, optical, near-infrared (UVOIR) telescope is required to enable the next generation of compelling astrophysics and exoplanet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. AMTD is a multiyear effort to develop, demonstrate and mature critical technologies to TRL-6 by 2018 so that a viable flight mission can be proposed to the 2020 Decadal Review. AMTD builds on the state of art (SOA) defined by over 30 years of monolithic & segmented ground & space-telescope mirror technology to mature six key technologies: center dotLarge-Aperture, Low Areal Density, High Stiffness Mirror Substrates: Both (4 to 8 m) monolithic and (8 to 16 m) segmented telescopes require larger and stiffer mirrors. center dotSupport System: Large-aperture mirrors require large support systems to ensure that they survive launch, deploy on orbit, and maintain a stable, undistorted shape. center dotMid/High Spatial Frequency Figure Error: Very smooth mirror is critical for producing high-quality point spread function (PSF) for high contrast imaging. center dotSegment Edges: The quality of segment edges impacts PSF for high-contrast imaging applications, contributes to stray light noise, and affects total collecting aperture. center dotSegment to Segment Gap Phasing: Segment phasing is critical for producing high-quality temporally-stable PSF. center dotIntegrated Model Validation: On-orbit performance is driven by mechanical & thermal stability. Compliance cannot be 100% tested, but relies on modeling. Because we cannot predict the future, AMTD is pursuing multiple design paths to provide the science community with options to enable either large aperture monolithic or segmented mirrors with clear engineering metrics traceable to science requirements

Advanced UVOIR Mirror Technology Development (AMTD) for Very Large Space Telescopes

NASA Technical Reports Server (NTRS)

Postman, Marc; Soummer, Remi; Sivramakrishnan, Annand; Macintosh, Bruce; Guyon, Olivier; Krist, John; Stahl, H. Philip; Smith, W. Scott; Mosier, Gary; Kirk, Charles;

Activity Learning as a Foundation for Security Monitoring in Smart Homes.

PubMed

Dahmen, Jessamyn; Thomas, Brian L; Cook, Diane J; Wang, Xiaobo

2017-03-31

Smart environment technology has matured to the point where it is regularly used in everyday homes as well as research labs. With this maturation of the technology, we can consider using smart homes as a practical mechanism for improving home security. In this paper, we introduce an activity-aware approach to security monitoring and threat detection in smart homes. We describe our approach using the CASAS smart home framework and activity learning algorithms. By monitoring for activity-based anomalies we can detect possible threats and take appropriate action. We evaluate our proposed method using data collected in CASAS smart homes and demonstrate the partnership between activity-aware smart homes and biometric devices in the context of the CASAS on-campus smart apartment testbed.

2016 National Algal Biofuels Technology Review Fact Sheet

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-06-01

Algae-based biofuels and bioproducts offer great promise in contributing to the U.S. Department of Energy (DOE) Bioenergy Technologies Office’s (BETO’s) vision of a thriving and sustainable bioeconomy fueled by innovative technologies. The state of technology for producing algal biofuels continues to mature with ongoing investment by DOE and the private sector, but additional research, development, and demonstration (RD&D) is needed to achieve widespread deployment of affordable, scalable, and sustainable algal biofuels.

NASA's Integrated Space Transportation Plan — 3 rd generation reusable launch vehicle technology update

NASA Astrophysics Data System (ADS)

Cook, Stephen; Hueter, Uwe

2003-08-01

NASA's Integrated Space Transportation Plan (ISTP) calls for investments in Space Shuttle safety upgrades, second generation Reusable Launch Vehicle (RLV) advanced development and third generation RLV and in-space research and technology. NASA's third generation launch systems are to be fully reusable and operation by 2025. The goals for third generation launch systems are to reduce cost by a factor of 100 and improve safety by a factor of 10,000 over current systems. The Advanced Space Transportation Program Office (ASTP) at NASA's Marshall Space Flight Center in Huntsville, AL has the agency lead to develop third generation space transportation technologies. The Hypersonics Investment Area, part of ASTP, is developing the third generation launch vehicle technologies in two main areas, propulsion and airframes. The program's major investment is in hypersonic airbreathing propulsion since it offers the greatest potential for meeting the third generation launch vehicles. The program will mature the technologies in three key propulsion areas, scramjets, rocket-based combined cycle and turbine-based combination cycle. Ground and flight propulsion tests are being planned for the propulsion technologies. Airframe technologies will be matured primarily through ground testing. This paper describes NASA's activities in hypersonics. Current programs, accomplishments, future plans and technologies that are being pursued by the Hypersonics Investment Area under the Advanced Space Transportation Program Office will be discussed.

New and emerging technologies for genetic toxicity testing.

PubMed

Lynch, Anthony M; Sasaki, Jennifer C; Elespuru, Rosalie; Jacobson-Kram, David; Thybaud, Véronique; De Boeck, Marlies; Aardema, Marilyn J; Aubrecht, Jiri; Benz, R Daniel; Dertinger, Stephen D; Douglas, George R; White, Paul A; Escobar, Patricia A; Fornace, Albert; Honma, Masamitsu; Naven, Russell T; Rusling, James F; Schiestl, Robert H; Walmsley, Richard M; Yamamura, Eiji; van Benthem, Jan; Kim, James H

2011-04-01

The International Life Sciences Institute (ILSI) Health and Environmental Sciences Institute (HESI) Project Committee on the Relevance and Follow-up of Positive Results in In Vitro Genetic Toxicity (IVGT) Testing established an Emerging Technologies and New Strategies Workgroup to review the current State of the Art in genetic toxicology testing. The aim of the workgroup was to identify promising technologies that will improve genotoxicity testing and assessment of in vivo hazard and risk, and that have the potential to help meet the objectives of the IVGT. As part of this initiative, HESI convened a workshop in Washington, DC in May 2008 to discuss mature, maturing, and emerging technologies in genetic toxicology. This article collates the abstracts of the New and Emerging Technologies Workshop together with some additional technologies subsequently considered by the workgroup. Each abstract (available in the online version of the article) includes a section addressed specifically to the strengths, weaknesses, opportunities, and threats associated with the respective technology. Importantly, an overview of the technologies and an indication of how their use might be aligned with the objectives of IVGT are presented. In particular, consideration was given with regard to follow-up testing of positive results in the standard IVGT tests (i.e., Salmonella Ames test, chromosome aberration assay, and mouse lymphoma assay) to add weight of evidence and/or provide mechanism of action for improved genetic toxicity risk assessments in humans. Copyright © 2010 Wiley-Liss, Inc.

Evolutionistic or revolutionary paths? A PACS maturity model for strategic situational planning.

PubMed

van de Wetering, Rogier; Batenburg, Ronald; Lederman, Reeva

2010-07-01

While many hospitals are re-evaluating their current Picture Archiving and Communication System (PACS), few have a mature strategy for PACS deployment. Furthermore, strategies for implementation, strategic and situational planning methods for the evolution of PACS maturity are scarce in the scientific literature. Consequently, in this paper we propose a strategic planning method for PACS deployment. This method builds upon a PACS maturity model (PMM), based on the elaboration of the strategic alignment concept and the maturity growth path concept previously developed in the PACS domain. First, we review the literature on strategic planning for information systems and information technology and PACS maturity. Secondly, the PMM is extended by applying four different strategic perspectives of the Strategic Alignment Framework whereupon two types of growth paths (evolutionistic and revolutionary) are applied that focus on a roadmap for PMM. This roadmap builds a path to get from one level of maturity and evolve to the next. An extended method for PACS strategic planning is developed. This method defines eight distinctive strategies for PACS strategic situational planning that allow decision-makers in hospitals to decide which approach best suits their hospitals' current situation and future ambition and what in principle is needed to evolve through the different maturity levels. The proposed method allows hospitals to strategically plan for PACS maturation. It is situational in that the required investments and activities depend on the alignment between the hospital strategy and the selected growth path. The inclusion of both strategic alignment and maturity growth path concepts make the planning method rigorous, and provide a framework for further empirical research and clinical practice.

The pivotal role of abscisic acid signaling during transition from seed maturation to germination.

PubMed

Yan, An; Chen, Zhong

2017-05-01

Seed maturation and germination are two continuous developmental processes that link two distinct generations in spermatophytes; the precise genetic control of these two processes is, therefore, crucially important for the survival of the next generation. Pieces of experimental evidence accumulated so far indicate that a concerted action of endogenous signals and environmental cues is required to govern these processes. Plant hormone abscisic acid (ABA) has been suggested to play a predominant role in directing seed maturation and maintaining seed dormancy under unfavorable environmental conditions until antagonized by gibberellins (GA) and certain environmental cues to allow the commencement of seed germination when environmental conditions are favorable; therefore, the balance of ABA and GA is a major determinant of the timing of seed germination. Due to the advent of new technologies and system biology approaches, molecular studies are beginning to draw a picture of the sophisticated genetic network that drives seed maturation during the past decade, though the picture is still incomplete and many details are missing. In this review, we summarize recent advances in ABA signaling pathway in the regulation of seed maturation as well as the transition from seed maturation to germination, and highlight the importance of system biology approaches in the study of seed maturation.

NASA Technology Demonstrations Missions Program Overview

NASA Technical Reports Server (NTRS)

Turner, Susan

2011-01-01

The National Aeronautics and Space Administration (NASA) Fiscal Year 2010 (FY10) budget introduced a new strategic plan that placed renewed emphasis on advanced missions beyond Earth orbit. This supports NASA s 2011 strategic goal to create innovative new space technologies for our exploration, science, and economic future. As a result of this focus on undertaking many and more complex missions, NASA placed its attention on a greater investment in technology development, and this shift resulted in the establishment of the Technology Demonstrations Missions (TDM) Program. The TDM Program, within the newly formed NASA Office of the Chief Technologist, supports NASA s grand challenges by providing a steady cadence of advanced space technology demonstrations (Figure 1), allowing the infusion of flexible path capabilities for future exploration. The TDM Program's goal is to mature crosscutting capabilities to flight readiness in support of multiple future space missions, including flight test projects where demonstration is needed before the capability can transition to direct mission The TDM Program has several unique criteria that set it apart from other NASA program offices. For instance, the TDM Office matures a small number of technologies that are of benefit to multiple customers to flight technology readiness level (TRL) 6 through relevant environment testing on a 3-year development schedule. These technologies must be crosscutting, which is defined as technology with potential to benefit multiple mission directorates, other government agencies, or the aerospace industry, and they must capture significant public interest and awareness. These projects will rely heavily on industry partner collaboration, and funding is capped for all elements of the flight test demonstration including planning, hardware development, software development, launch costs, ground operations, and post-test assessments. In order to inspire collaboration across government and industry, more than 70% of the TDM funds will be competitively awarded as a result of yearly calls for proposed flight demonstrators and selected based on possible payoff to NASA, technology maturity, customer interest, cost, and technical risk reduction. This paper will give an overview of the TDM Program s mission and organization, as well as its current status in delivering advanced space technologies that will enable more flexible and robust future missions. It also will provide several examples of missions that fit within these parameters and expected outcomes.

A Study on: Exploring U.S. Missile Defense Requirements in 2010: What Are the Policy and Technology Challenges?

DTIC Science & Technology

1997-04-01

technology matures. Mid-course phase Warhead & Booster ■’-=>- penaid deployment burnout v y...phase Warhead & Booster _^, penaid deployment burnout v y^ complete...and penaids fit so equippec I) are deployed immediately following boost phase burnout . • Large deceleration occurs from atmospheric drag upon re

Transcending Technological Innovation: The Impact of Acquisitions on Entrepreneurial Technical Organizations

ERIC Educational Resources Information Center

Crochetiere, Bruce

2011-01-01

Technology firms with substantial cash reserves acquire smaller entrepreneurial firms for diversification. In 2006, 3 large firms acquired 28 organizations, with the combined deals exceeding $4.7 billion. The problem addressed in this study is that new start-up companies with innovative ideas may not mature when they are acquired by larger…

[Review of Second Generation Sequencing and Its Application in Forensic Genetics].

PubMed

Zhang, S H; Bian, Y N; Zhao, Q; Li, C T

2016-08-01

The rapid development of second generation sequencing （SGS） within the past few years has led to the increasement of data throughput and read length while at the same time brought down substantially the sequencing cost. This made new breakthrough in the area of biology and ushered the forensic genetics into a new era. Based on the history of sequencing application in forensic genetics, this paper reviews the importance of sequencing technologies for genetic marker detection. The application status and potential of SGS in forensic genetics are discussed based on the already explored SGS platforms of Roche, Illumina and Life Technologies. With these platforms, DNA markers （SNP, STR）, RNA markers （mRNA, microRNA） and whole mtDNA can be sequenced. However, development and validation of application kits, maturation of analysis software, connection to the existing databases and the possible ethical issues occurred with big data will be the key factors that determine whether this technology can substitute or supplement PCR-CE, the mature technology, and be widely used for cases detection. Copyright© by the Editorial Department of Journal of Forensic Medicine.

Space Industry Study Industrial College of the Armed Forces National Defense University

DTIC Science & Technology

2002-06-01

information technologies , especially fiber, cable, and cellular communications, which forced space systems away from old market roles and denied entry to... technologies fill market niches. As technology matures, small satellites have been viewed a partial solution to this cycle, enabling faster programs...years, the largely unforeseen growth in the internet has proven a valuable new market for satellite service providers. And over the past few years

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, Elizabeth James Kistin; Warren, Drake; Hess, Marguerite Evelyn

This study examines the structure and impact of state-funded technology maturation programs that leverage research institutions for economic development throughout the United States. The lessons learned and practices identified from previous experiences will inform Sandia National Laboratories' Government Relations and Technology Partnerships teams as they participate in near-term discussions about the proposed Technology Readiness Gross Receipts Tax Credit and Program, and continue to shape longer-term program and partnership opportunities. This Page Intentionally Left Blank

An Analysis of Technology Transition Within the Department of Defense

DTIC Science & Technology

2010-06-01

relentless adversaries, it is essential that the DoD performs technology transition in a practical yet expedient manner. Time is a critical factor in...themselves, rather than rely on DOD labs to do so—a practice that brings cost and schedule risk since programs may well find themselves addressing problems...that utilized non-traditional, industry practices to abate the difficulties bringing technologies to a suitable maturation state. Albeit these

High-power free-electron lasers-technology and future applications

NASA Astrophysics Data System (ADS)

Socol, Yehoshua

2013-03-01

Free-electron laser (FEL) is an all-electric, high-power, high beam-quality source of coherent radiation, tunable - unlike other laser sources - at any wavelength within wide spectral region from hard X-rays to far-IR and beyond. After the initial push in the framework of the “Star Wars” program, the FEL technology benefited from decades of R&D and scientific applications. Currently, there are clear signs that the FEL technology reached maturity, enabling real-world applications. E.g., successful and unexpectedly smooth commissioning of the world-first X-ray FEL in 2010 increased in one blow by more than an order of magnitude (40×) wavelength region available by FEL technology and thus demonstrated that the theoretical predictions just keep true in real machines. Experience of ordering turn-key electron beamlines from commercial companies is a further demonstration of the FEL technology maturity. Moreover, successful commissioning of the world-first multi-turn energy-recovery linac demonstrated feasibility of reducing FEL size, cost and power consumption by probably an order of magnitude in respect to previous configurations, opening way to applications, previously considered as non-feasible. This review takes engineer-oriented approach to discuss the FEL technology issues, keeping in mind applications in the fields of military and aerospace, next generation semiconductor lithography, photo-chemistry and isotope separation.

The current challenges to efficient immature oocyte cryopreservation.

PubMed

Brambillasca, Fausta; Guglielmo, Maria Cristina; Coticchio, Giovanni; Mignini Renzini, Mario; Dal Canto, Mariabeatrice; Fadini, Rubens

2013-12-01

Oocyte cryopreservation represents an important tool for assisted reproductive technology. It offers the opportunity to preserve fertility in women at risk of loss of the ovarian function for various pathologies. It also represents a treatment alternative for couples that cannot benefit from embryo cryopreservation because of moral, religious, or legal constrains. On the other hand, in vitro oocyte maturation has a range of applications. It can be applied in patients with a contraindication to ovarian stimulation to prevent ovarian hyperstimulation syndrome or to eliminate the risk of stimulation of hormone-sensitive tumours in cancer patients. However, while mature oocyte cryopreservation has found wide-spread application and oocyte in vitro maturation has a place for the treatment of specific clinical conditions, data on the efficiency of freezing of immature or in vitro matured oocytes are poorer. In this review we will focus on the combination of oocyte in vitro maturation with oocyte cryopreservation with particular emphasis on the biological implications of the cryopreservation of immature or in vitro matured oocytes. The two cryopreservation approaches, slow freezing and vitrification, will be discussed in relation to possible cryodamage occurring to subcellular structures of the oocyte and the functional interaction between oocyte and cumulus cells.

Maturity Model for Advancing Smart Grid Interoperability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Knight, Mark; Widergren, Steven E.; Mater, J.

2013-10-28

Abstract—Interoperability is about the properties of devices and systems to connect and work properly. Advancing interoperability eases integration and maintenance of the resulting interconnection. This leads to faster integration, lower labor and component costs, predictability of projects and the resulting performance, and evolutionary paths for upgrade. When specifications are shared and standardized, competition and novel solutions can bring new value streams to the community of stakeholders involved. Advancing interoperability involves reaching agreement for how things join at their interfaces. The quality of the agreements and the alignment of parties involved in the agreement present challenges that are best met withmore » process improvement techniques. The GridWise® Architecture Council (GWAC) sponsored by the United States Department of Energy is supporting an effort to use concepts from capability maturity models used in the software industry to advance interoperability of smart grid technology. An interoperability maturity model has been drafted and experience is being gained through trials on various types of projects and community efforts. This paper describes the value and objectives of maturity models, the nature of the interoperability maturity model and how it compares with other maturity models, and experiences gained with its use.« less

Mature Oocyte Cryopreservation for Fertility Preservation.

PubMed

Liang, Tina; Motan, Tarek

2016-01-01

In recent decades, advances in cancer treatment have led to a dramatic improvement in long term survival. This has led to an increasing focus on quality of life after surviving cancer treatment, with fertility being an important aspect. Given the known reproductive risks of cancer therapies, there has been a growing interest in the field of fertility preservation (also referred to as oncofertility). Mature oocyte cryopreservation is no longer considered experimental and has become a realistic option for reproductive aged women prior to undergoing cancer treatment. Additionally, as cryopreservation techniques improve, mature oocyte cryopreservation is increasing being marketed to healthy women without cancer wishing to delay child bearing, also termed "social egg freezing". This chapter provides a review of the current technology, use, and outcomes of mature oocyte cryopreservation. It also outlines the ethical debate surrounding social egg freezing and directions for future research in female fertility preservation.