42 CFR 456.653 - Acceptable reasons for not meeting requirements for annual on-site review.

Code of Federal Regulations, 2010 CFR

2010-10-01

... for Failure To Make a Satisfactory Showing of an Effective Institutional Utilization Control Program... will find an agency's showing satisfactory, even if it failed to meet the annual review requirements of...

42 CFR 456.650 - Basis, purpose and scope.

Code of Federal Regulations, 2010 CFR

2010-10-01

... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Penalty for Failure To Make a Satisfactory... be reduced, by a specified formula, for any quarter in which a State fails to make a satisfactory... subpart specifies— (1) What States must do to make a satisfactory showing; (2) How the Administrator will...

Thermal/acoustical aircraft insulation material

NASA Technical Reports Server (NTRS)

Struzik, E. A.; Kunz, R.; Lin, R.

1975-01-01

Attempts made to improve the acoustical properties of low density Fiberfrax foam, an aircraft insulation material, are reported. Characterizations were also made of the physical and thermal properties. Two methods, optimization of fiber blend composition and modification of the foam fabrication process, were examined as possible means of improving foam acoustics. Flame impingement tests were also made; results show performance was satisfactory.

Symbolic magnitude processing in elementary school children: A group administered paper-and-pencil measure (SYMP Test).

PubMed

Brankaer, Carmen; Ghesquière, Pol; De Smedt, Bert

2017-08-01

The ability to compare symbolic numerical magnitudes correlates with children's concurrent and future mathematics achievement. We developed and evaluated a quick timed paper-and-pencil measure that can easily be used, for example in large-scale research, in which children have to cross out the numerically larger of two Arabic one- and two-digit numbers (SYMP Test). We investigated performance on this test in 1,588 primary school children (Grades 1-6) and examined in each grade its associations with mathematics achievement. The SYMP Test had satisfactory test-retest reliability. The SYMP Test showed significant and stable correlations with mathematics achievement for both one-digit and two-digit comparison, across all grades. This replicates the previously observed association between symbolic numerical magnitude processing and mathematics achievement, but extends it by showing that the association is observed in all grades in primary education and occurs for single- as well as multi-digit processing. Children with mathematical learning difficulties performed significantly lower on one-digit comparison and two-digit comparison in all grades. This all suggests satisfactory construct and criterion-related validity of the SYMP Test, which can be used in research, when performing large-scale (intervention) studies, and by practitioners, as screening measure to identify children at risk for mathematical difficulties or dyscalculia.

Sclerotherapy with picibanil (OK-432) for congenital lymphatic malformation in the head and neck.

PubMed

Sung, M W; Lee, D W; Kim, D Y; Lee, S J; Hwang, C H; Park, S W; Kim, K H

2001-08-01

Congenital lymphatic malformations of the head and neck (LMHN) present special challenges to the otolaryngologist-head and neck surgeon. Recently, a number of sclerotherapy trials have shown promising results. In this study, we present our experiences with picibanil (OK-432) sclerotherapy for this lesion. Retrospectively review. We retrospectively reviewed 21 patients who have undergone sclerotherapy with picibanil for LMHN. Satisfactory response with complete or nearly complete shrinkage of the lesions was observed in 15 cases after repeated sclerotherapy (average, two times). We did not observe any significant morbidity or complications in the patients treated with picibanil. Reduction in size of the mass was achieved in weeks to months. Some of the patients who had not had any other previous treatment showed remarkable reductions in size even after the first therapy. When we used picibanil sclerotherapy as a primary treatment for the LMHN, most of our patients showed satisfactory results regardless of the size or location of the lesions. Given with our experience and the reports that failure of picibanil sclerotherapy does not hinder subsequent surgical salvage procedures, we recommend trying picibanil sclerotherapy as a primary treatment for the LMHN and performing surgical excision as a secondary modality if the response to the sclerotherapy is not satisfactory.

A Better Leveled Playing Field for Assessing Satisfactory Job Performance of Superintendents on the Basis of High-Stakes Testing Outcomes

ERIC Educational Resources Information Center

Young, I. Phillip; Cox, Edward P.; Buckman, David G.

2014-01-01

To assess satisfactory job performance of superintendents on the basis of school districts' high-stakes testing outcomes, existing teacher models were reviewed and critiqued as potential options for retrofit. For these models, specific problems were identified relative to the choice of referent groups. An alternate referent group (statewide…

Psychometric properties of WHOQOL-BREF in clinical and health Greek populations: incorporating new culture-relevant items.

PubMed

Ginieri-Coccossis, M; Triantafillou, E; Tomaras, V; Soldatos, C; Mavreas, V; Christodoulou, G

2012-01-01

Τhe present study examines main psychometric properties of the World Health Organisation (WHO) quality of life (QoL) instrument, the WHOQOL-BREF with the inclusion of four national items. Participants were 425 adult native Greek speaking, grouped into patients with physical disorders, psychiatric disorders and healthy individuals. Participants were administered WHOQOL-BREF and 23 national items, the General Health Questionnaire (GHQ-28) and the Life Satisfaction Index (LSI). Confirmatory factor analysis produced acceptable fit values for the original model of 26 items within the four WHOQOL domains: physical health, psychological health, social relationships and environment. Testing for the fit of national items within this model, the results indicated four new items with the most satisfactory fit indices and were thus included forming a 30-items version. The national items refer to: (a) nutrition, (b) satisfaction with work (both loaded in the physical health domain), (c) home life and (d) social life (both loaded in the social relationships domain). Statistical tests were applied to the 26- and 30-items versions producing satisfactory results, with the 30-items version showing slightly better values. Furthermore, results on the 30-items version included: (a) internal consistency, which was found satisfactory, with alpha values ranging from α=0.67-0.81, while the inclusion of new items produced higher alpha values in physical health and social relationships domains, (b) construct validity with good item-domain correlations, as well as strong correlations between domain scores, (c) convergent validity, which was very satisfactory, showing good correlations with GHQ-28 and LSI, (d) discriminant validity, showing instrument's ability to detect QoL differences between healthy and unhealthy participants, and between physically ill and psychiatric patients, and (e) test-retest reliability, with ICC scores in excess of 0.80 obtaining for all domains. The WHOQOL-BREF Greek version was found to perform well with sick and healthy participants, demonstrating satisfactory psychometric properties. Use of the instrument may be recommended for clinical and general populations, for service or intervention evaluation, as well as for cross-cultural clinical trials.

The neutron flux monitors from 20 keV to 1 MeV for BNCT: performance study using accelerator-based neutron sources

NASA Astrophysics Data System (ADS)

Guan, X. C.; Gong, Y.; Murata, I.; Wang, T. S.

2018-05-01

The performance of the neutron flux monitors from 20 keV to 1 MeV developed for boron neutron capture therapy (BNCT) is studied by Monte Carlo simulations using accelerator-based neutron sources (ABNSs). The results show that the performance of the neutron flux monitors is very satisfactory and they can be efficiently used in practical applications to measure the neutron fluxes from 20 keV to 1 MeV of ABNSs for BNCT to high accuracy.

Pilot-scale testing membrane bioreactor for wastewater reclamation in industrial laundry.

PubMed

Andersen, M; Kristensen, G H; Brynjolf, M; Grüttner, H

2002-01-01

A pilot-scale study of membrane bioreactor treatment for reclamation of wastewater from Berendsen Textile Service industrial laundry in Søborg, Denmark was carried out over a 4 month period. A satisfactory COD degradation was performed resulting in a low COD in the permeate (< 50 mg/l). To obtain satisfactory treatment, addition of nitrogen was necessary. The biodegradability of the permeate was very low (BOD5 < 2 mg/l). A hydraulic retention time of 1 d turned out to be sufficient at a sludge concentration of 10 g MLSS/l. Through addition of a cationic polymer, a satisfactory dewaterability of the sludge was reached. Membrane tests showed that operating at a trans-membrane pressure of 3 bar and a cross-flow velocity of 4 m/s, a flux of 120 l/m2h can be expected without using chemicals for membrane cleaning. The quality of the permeate was very good when comparing to the reuse quality demands of water to the wash processes. Reuse of the permeate in all rinsing steps requires additional treatment through reverse osmosis.

Surgical model pig ex vivo for venous dissection teaching in medical schools.

PubMed

Tube, Milton Ignacio Carvalho; Spencer-Netto, Fernando Antonio Campelo; Oliveira, Anderson Igor Pereira de; Holanda, Arthur Cesário de; Barros, Bruno Leão Dos Santos; Rezende, Caio Cezar Gomes; Cavalcanti, João Pedro Guerra; Batista, Marília Apolinário; Campos, Josemberg Marins

2017-02-01

To investigate a method for development of surgical skills in medical students simulating venous dissection in surgical ex vivo pig model. Prospective, analytical, experimental, controlled study with four stages: selection, theoretical teaching, training and assessment. Sample of 312 students was divided into two groups: Group A - 2nd semester students; Group B - students of 8th semester. The groups were divided into five groups of 12 students, trained two hours per week in the semester. They set up four models to three students in each skill station assisted by a monitor. Teaching protocol emergency procedures training were applied to venous dissection, test goal-discursive and OSATS scale. The pre-test confirmed that the methodology has not been previously applied to the students. The averages obtained in the theoretical evaluation reached satisfactory parameters in both groups. The results of applying OSATS scale showed the best performance in group A compared to group B, however, both groups had satisfactory medium. The method was enough to raise a satisfactory level of skill both groups in venous dissection running on surgical swine ex vivo models.

Influenza detection and prediction algorithms: comparative accuracy trial in Östergötland county, Sweden, 2008-2012.

PubMed

Spreco, A; Eriksson, O; Dahlström, Ö; Timpka, T

2017-07-01

Methods for the detection of influenza epidemics and prediction of their progress have seldom been comparatively evaluated using prospective designs. This study aimed to perform a prospective comparative trial of algorithms for the detection and prediction of increased local influenza activity. Data on clinical influenza diagnoses recorded by physicians and syndromic data from a telenursing service were used. Five detection and three prediction algorithms previously evaluated in public health settings were calibrated and then evaluated over 3 years. When applied on diagnostic data, only detection using the Serfling regression method and prediction using the non-adaptive log-linear regression method showed acceptable performances during winter influenza seasons. For the syndromic data, none of the detection algorithms displayed a satisfactory performance, while non-adaptive log-linear regression was the best performing prediction method. We conclude that evidence was found for that available algorithms for influenza detection and prediction display satisfactory performance when applied on local diagnostic data during winter influenza seasons. When applied on local syndromic data, the evaluated algorithms did not display consistent performance. Further evaluations and research on combination of methods of these types in public health information infrastructures for 'nowcasting' (integrated detection and prediction) of influenza activity are warranted.

Pell Grants as Performance-Based Aid? An Examination of Satisfactory Academic Progress Requirements in the Nation's Largest Need-Based Aid Program. A CAPSEE Working Paper

ERIC Educational Resources Information Center

Schudde, Lauren; Scott-Clayton, Judith

2014-01-01

The Federal Pell Grant Program is the nation's largest need-based grant program. While students' initial eligibility for the Pell is based on financial need, renewal of the award is contingent on their making satisfactory academic progress (SAP)--meeting minimum academic standards similar to those proposed in models of performance-based…

Trained nurses can obtain satisfactory bone marrow aspirates and trephine biopsies.

PubMed Central

Lawson, S; Aston, S; Baker, L; Fegan, C D; Milligan, D W

1999-01-01

AIMS: To assess the feasibility of training nurse practitioners to perform bone marrow aspiration and trephine biopsy, and to compare the quality of these samples with those obtained by medical staff. METHODS: A retrospective audit was undertaken of nurse practitioner and medical staff performance in bone marrow procedures in a busy haematology day unit. RESULTS: Nurse practitioners fared favourably in comparison with medical staff in performing bone marrow trephine biopsies, with mean biopsy lengths of 11 mm and 10.7 mm respectively. However, only 78% of the smears obtained by the nurses were judged technically satisfactory, compared with 91% prepared by doctors. This discrepancy was thought to be due largely to the quality of slide spreading. CONCLUSIONS: With motivated staff and a structured educational and training programme it is possible for nurse practitioners to perform the techniques of bone marrow aspiration and biopsy, and obtain specimens of satisfactory quality, thus improving efficiency of the haematology day unit and increasing quality of patient care. Images PMID:10396248

Flight Investigation of the Performance of a Two-stage Solid-propellant Nike-deacon (DAN) Meteorological Sounding Rocket

NASA Technical Reports Server (NTRS)

Heitkotter, Robert H

1956-01-01

A flight investigation of two Nike-Deacon (DAN) two-stage solid-propellant rocket vehicles indicated satisfactory performance may be expected from the DAN meteorological sounding rocket. Peak altitudes of 356,000 and 350,000 feet, respectively, were recorded for the two flight tests when both vehicles were launched from sea level at an elevation angle of 75 degrees. Performance calculations based on flight-test results show that altitudes between 358,000 feet and 487,000 feet may be attained with payloads varying between 60 pounds and 10 pounds.

Concepts. The Journal of Defense Systems Acquisition Management. Summer 1981. Volume 4, Number 3.

DTIC Science & Technology

1981-01-01

Performance FREQUENCY POWER OUTPUT GIZMO MODEL 25 0-50 MHZ SATISFACTORY 50-125 MHZ UNSATISFACTORY ASTROMATICS MODEL C 0-50 MHZ SATISFACTORY 50-125 MHZ...MHZ) GIZMO ----- ASTROMATICS- NOTES: 1. Diagrams excellent for portraying precise technical relationships. 2. Diagrams are economical means of

A simple validated multi-analyte method for detecting drugs in oral fluid by ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS).

PubMed

Zheng, Yufang; Sparve, Erik; Bergström, Mats

2018-06-01

A UPLC-MS/MS method was developed to identify and quantitate 37 commonly abused drugs in oral fluid. Drugs of interest included amphetamines, benzodiazepines, cocaine, opiates, opioids, phencyclidine and tetrahydrocannabinol. Sample preparation and extraction are simple, and analysis times short. Validation showed satisfactory performance at relevant concentrations. The possibility of contaminated samples as well as the interpretation in relation to well-knows matrices, such as urine, will demand further study. Copyright © 2017 John Wiley & Sons, Ltd.

What do you mean by "satisfactory"?

PubMed

Crebbin, W

2005-09-01

One of the difficulties in designing assessment for medical trainees has been defining what is meant by "satisfactory". Whilst a list of "unsatisfactory" and "outstanding" characteristics can be identified with very little difficulty, it is the middle ground that holds the challenge. This is especially true in the non-technical areas of medical practice, which have been brought into greater prominence since the development and publication of CanMEDS 2000. As part of that process, questions about what is meant by "satisfactory", "standards" and/or benchmarks, have been brought into sharper focus. Additional questions are being asked as to whether competencies must necessarily be equated with minimum expectations or if they can be set, in conjunction with standards, to situate required "satisfactory" performance at a level significantly above a minimal level. A search of current literature on competencies and assessment was carried out. From that analysis, it became evident that a definition of "satisfactory" in assessing competence is dependent upon the identification of underlying factors, including the kind of competence, the kind of knowledge, and the level of expertise required to match the standard of assessment. The varying definitions, expectations, and levels of "satisfactory" were mapped to illustrate a way to plot the level of "satisfactory" according to the task, the experience of the trainee, and the stage of training. This map also provides a method for developing shared understandings of the targeted level within the "satisfactory zone".

Implementation of the qualities of radiodiagnostic: mammography

NASA Astrophysics Data System (ADS)

Pacífico, L. C.; Magalhães, L. A. G.; Peixoto, J. G. P.; Fernandes, E.

2018-03-01

The objective of the present study was to evaluate the expanded uncertainty of the mammographic calibration process and present the result of the internal audit performed at the Laboratory of Radiological Sciences (LCR). The qualities of the mammographic beans that are references in the LCR, comprises two irradiation conditions: no-attenuated beam and attenuated beam. Both had satisfactory results, with an expanded uncertainty equals 2,1%. The internal audit was performed, and the degree of accordance with the ISO/IEC 17025 was evaluated. The result of the internal audit was satisfactory. We conclude that LCR can perform calibrations on mammography qualities for end users.

Development of an integrated, zero-G pneumatic transporter/rotating-paddle incinerator/catalytic afterburner subsystem for processing human waste on board spacecraft

NASA Technical Reports Server (NTRS)

Fields, S. F.; Labak, L. J.; Honegger, R. J.

1974-01-01

A baseline laboratory prototype of an integrated, six man, zero-g subsystem for processing human wastes onboard spacecraft was investigated, and included the development of an operational specification for the baseline subsystem, followed by design and fabrication. The program was concluded by performing a series of six tests over a period of two weeks to evaluate the performance of the subsystem. The results of the tests were satisfactory, however, several changes in the design of the subsystem are required before completely satisfactory performance can be achieved.

Satisfactory visualization rates of standard cardiac views at 18 to 22 weeks' gestation using spatiotemporal image correlation.

PubMed

Cohen, Leeber; Mangers, Kristie; Grobman, William A; Platt, Lawrence D

2009-12-01

The purpose of this study was to determine the frequency with which 3 standard screening views of the fetal heart (4-chamber, left ventricular outflow tract [LVOT], and right ventricular outflow tract [RVOT]) can be obtained satisfactorily with the spatiotemporal image correlation (STIC) technique. A prospective study of 111 patients undergoing anatomic surveys at 18 to 22 weeks was performed. Two ultrasound machines with fetal cardiac settings were used. The best volume set that could be obtained from each patient during a 45-minute examination was graded by 2 sonologists with regard to whether the 4-chamber, LVOT, and RVOT images were satisfactory for screening. All 3 views were judged satisfactory for screening in most patients: 1 sonologist graded the views as satisfactory in 70% of the patients, whereas the other found the views to be satisfactory in 83%. The position of the placenta did not alter the probability of achieving a satisfactory view, but a fetus in the spine anterior position was associated with a significantly lower probability that the views were regarded as satisfactory for screening (odds ratio, 0.28; 95% confidence interval, 0.09-0.70; P < .05). This study suggests that STIC may assist with screening for cardiac anomalies at 18 to 22 weeks' gestation.

Software for computerised analysis of cardiotocographic traces.

PubMed

Romano, M; Bifulco, P; Ruffo, M; Improta, G; Clemente, F; Cesarelli, M

2016-02-01

Despite the widespread use of cardiotocography in foetal monitoring, the evaluation of foetal status suffers from a considerable inter and intra-observer variability. In order to overcome the main limitations of visual cardiotocographic assessment, computerised methods to analyse cardiotocographic recordings have been recently developed. In this study, a new software for automated analysis of foetal heart rate is presented. It allows an automatic procedure for measuring the most relevant parameters derivable from cardiotocographic traces. Simulated and real cardiotocographic traces were analysed to test software reliability. In artificial traces, we simulated a set number of events (accelerations, decelerations and contractions) to be recognised. In the case of real signals, instead, results of the computerised analysis were compared with the visual assessment performed by 18 expert clinicians and three performance indexes were computed to gain information about performances of the proposed software. The software showed preliminary performance we judged satisfactory in that the results matched completely the requirements, as proved by tests on artificial signals in which all simulated events were detected from the software. Performance indexes computed in comparison with obstetricians' evaluations are, on the contrary, not so satisfactory; in fact they led to obtain the following values of the statistical parameters: sensitivity equal to 93%, positive predictive value equal to 82% and accuracy equal to 77%. Very probably this arises from the high variability of trace annotation carried out by clinicians. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Factor Analysis of the Brazilian Version of UPPS Impulsive Behavior Scale.

PubMed

Sediyama, Cristina Y N; Moura, Ricardo; Garcia, Marina S; da Silva, Antonio G; Soraggi, Carolina; Neves, Fernando S; Albuquerque, Maicon R; Whiteside, Setephen P; Malloy-Diniz, Leandro F

2017-01-01

Objective: To examine the internal consistency and factor structure of the Brazilian adaptation of the UPPS Impulsive Behavior Scale. Methods: UPPS is a self-report scale composed by 40 items assessing four factors of impulsivity: (a) urgency, (b) lack of premeditation; (c) lack of perseverance; (d) sensation seeking. In the present study 384 participants (278 women and 106 men), who were recruited from schools, universities, leisure centers and workplaces fulfilled the UPPS scale. An exploratory factor analysis was performed by using Varimax factor rotation and Kaiser Normalization, and we also conducted two confirmatory analyses to test the independency of the UPPS components found in previous analysis. Results: Results showed a decrease in mean UPPS total scores with age and this analysis showed that the youngest participants (below 30 years) scored significantly higher than the other groups over 30 years. No difference in gender was found. Cronbach's alpha, results indicated satisfactory values for all subscales, with similar high values for the subscales and confirmatory factor analysis indexes also indicated a poor model fit. The results of two exploratory factor analysis were satisfactory. Conclusion: Our results showed that the Portuguese version has the same four-factor structure of the original and previous translations of the UPPS.

Results achieved by emergency physicians in teaching basic cardiopulmonary resuscitation to secondary school students.

PubMed

Jiménez-Fábrega, Xavier; Escalada-Roig, Xavier; Sánchez, Miquel; Culla, Alexandre; Díaz, Núria; Gómez, Xavier; Villena, Olga; Rodríguez, Esther; Gaspar, Alberto; Molina, José Emilio; Salvador, Jordi; Miró, Oscar

2009-06-01

We investigated the results obtained with a basic cardiopulmonary resuscitation (b-CPR) program (PROCES) specifically designed for secondary school students (14-16 years old) and taught by emergency physicians. We used a multiple-choice test with 20 questions (10 on theory and 10 on skills) answered before and immediately after and 1 year after receiving the b-CPR course. Satisfactory learning was considered when at least 8 out of 10 skill questions were correctly answered. We investigated student variables associated with better immediate and deferred (1 year after) PROCES performance. We compared the results with those obtained using a more standardized program to teach b-CPR to police cadets. We enrolled 600 high school students. PROCES achieved significant improvement in overall, theory and skill marks immediately after the course (P<0.001), with a significant decay in all of them 1 year after the course (P<0.001). Satisfactory learning was achieved by 57% of school students immediately after PROCES and by 37% when assessed 1 year later. Students without pending study subjects (P=0.001) and those from private schools (P<0.01) achieved significantly better performance immediately after PROCES and only female students achieved greater performance 1 year after the course (P<0.05). With respect to police cadets instructed through a standardized course, immediate satisfactory learning of school students was lower (79 vs. 57%, respectively; P<0.001), whereas deferred satisfactory learning was higher (23 vs. 37%, respectively; P<0.05). Emergency physicians can satisfactorily instruct secondary school students in b-CPR using PROCES, and this specific program achieves a reasonable amount of satisfactory learning.

One-pot preparation of magnetic carbon adsorbent derived from pomelo peel for magnetic solid-phase extraction of pollutants in environmental waters.

PubMed

Huang, Youfang; Peng, Jinghe; Huang, Xiaojia

2018-04-20

In this work, magnetic carbon material derived from pomelo peels (MCMPs) was conveniently fabricated utilizing one-pot synthesis method and employed as adsorbent of magnetic solid-phase extraction (MSPE). Several characterized measures including infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometer were used to investigate the morphology, spectroscopic and magnetic properties of prepared adsorbent. Apolar parabens and polar fluoroquinolones (FQs) were used to investigate the extraction performance of MCMPs. Under the optimized extraction conditions, the MCMPs displayed satisfactory extraction performance for target analytes. At the same time, the MCMPs/MSPE was combined with HPLC-DAD for the sensitive determination of parabens and FQs in real-life water samples. Results showed that the limits of detection (S/N = 3) for parabens and FQs were in the ranges of 0.011-0.053 μg/L and 0.012-0.46 μg/L, respectively. The spiked recoveries were in the range of 76.6-116% for parabens and 80.2-114% for FQs with good repeatability (relative standard deviations less than 10%). In comparison to reported methods, the developed MCMPs/MSPE-HPLC-DAD showed some merits including low-cost, simplicity, satisfactory sensitivity and green non-pollution. Copyright © 2018 Elsevier B.V. All rights reserved.

Characteristics of Patients With Satisfactory Functional Gain Following Total Joint Arthroplasty in a Postacute Rehabilitation Setting.

PubMed

Hershkovitz, Avital; Vesilkov, Marina; Beloosesky, Yichayaou; Brill, Shai

2017-01-10

Total joint arthroplasty (TJA) is an effective and successful treatment of osteoarthritis of the hip and knee as quantified by several measures, such as pain relief, improved walking, improved self-care, functions, and increased quality of life. Data are lacking as to the definition of a satisfactory functional gain in a postacute setting and identifying the characteristics of older patients with TJA who may achieve that gain. Our aim was to characterize patients who may achieve a satisfactory functional gain in a postacute rehabilitation setting following TJA. This was a retrospective study of 180 patients with TJA admitted during 2010-2013. The main outcome measures were the Functional Independence Measure (FIM), the Montebello Rehabilitation Factor Score (MRFS) on the motor FIM, and the Timed Get Up and Go Test. Satisfactory functional gain was defined as an mFIM MRFS score above median score. Comparisons of clinical and demographic characteristics between patients who achieved a satisfactory functional gain versus those who did not were performed by the Mann-Whitney U test and the χ test. The proportion of patients who achieved a satisfactory functional gain was similar in the total knee arthroplasty and total hip arthroplasty (THA) groups. The most significant characteristic of patients who achieved a satisfactory functional gain was their admission functional ability. Age negatively impacted the ability to achieve a satisfactory functional gain in patients with THA. Functional level on admission is the best predictive factor for a better rehabilitation outcome for patients with TJA. Age negatively affects functional gain in patients with THA.

Interference Mitigation Schemes for Wireless Body Area Sensor Networks: A Comparative Survey

PubMed Central

Le, Thien T.T.; Moh, Sangman

2015-01-01

A wireless body area sensor network (WBASN) consists of a coordinator and multiple sensors to monitor the biological signals and functions of the human body. This exciting area has motivated new research and standardization processes, especially in the area of WBASN performance and reliability. In scenarios of mobility or overlapped WBASNs, system performance will be significantly degraded because of unstable signal integrity. Hence, it is necessary to consider interference mitigation in the design. This survey presents a comparative review of interference mitigation schemes in WBASNs. Further, we show that current solutions are limited in reaching satisfactory performance, and thus, more advanced solutions should be developed in the future. PMID:26110407

Finite Time Control Design for Bilateral Teleoperation System With Position Synchronization Error Constrained.

PubMed

Yang, Yana; Hua, Changchun; Guan, Xinping

2016-03-01

Due to the cognitive limitations of the human operator and lack of complete information about the remote environment, the work performance of such teleoperation systems cannot be guaranteed in most cases. However, some practical tasks conducted by the teleoperation system require high performances, such as tele-surgery needs satisfactory high speed and more precision control results to guarantee patient' health status. To obtain some satisfactory performances, the error constrained control is employed by applying the barrier Lyapunov function (BLF). With the constrained synchronization errors, some high performances, such as, high convergence speed, small overshoot, and an arbitrarily predefined small residual constrained synchronization error can be achieved simultaneously. Nevertheless, like many classical control schemes only the asymptotic/exponential convergence, i.e., the synchronization errors converge to zero as time goes infinity can be achieved with the error constrained control. It is clear that finite time convergence is more desirable. To obtain a finite-time synchronization performance, the terminal sliding mode (TSM)-based finite time control method is developed for teleoperation system with position error constrained in this paper. First, a new nonsingular fast terminal sliding mode (NFTSM) surface with new transformed synchronization errors is proposed. Second, adaptive neural network system is applied for dealing with the system uncertainties and the external disturbances. Third, the BLF is applied to prove the stability and the nonviolation of the synchronization errors constraints. Finally, some comparisons are conducted in simulation and experiment results are also presented to show the effectiveness of the proposed method.

Causes and Surgical Outcomes of Lower Eyelid Retraction

PubMed Central

Kim, Kun Hae; Baek, Ji Sun; Lee, Saem; Lee, Jung Hye; Choi, Hye Sun; Kim, Sung Joo

2017-01-01

Purpose To investigate the causes of lower eyelid retraction and evaluate the outcomes of various surgical procedures. Methods We conducted a retrospective medical record review of patients who underwent lower eyelid retraction surgery performed by a single surgeon at Kim's Eye Hospital between 2006 and 2013. We investigated the causes of lower eyelid retraction, clinical history, characteristics, treatment, and surgical outcomes. Preoperative and postoperative margin reflex distance 2 and inferior scleral show were measured for each eyelid. Success was defined as a positive eyelid elevation and a decrease in inferior scleral show. Results A total of 19 lower eyelids were treated in 14 patients with lower eyelid retraction. For cosmetic reasons, surgical correction for congenital lower eyelid retraction was performed on seven eyelids (36.8%). Ten eyelids (52.6%) exhibited secondary lower eyelid retraction after surgery. One eyelid (5.3%) was affected by facial palsy and one eyelid (5.3%) exhibited exophthalmos of an unknown origin. We adopted a selective approach based on lower eyelid retraction severity. Spacer grafting via a subconjunctival approach was the most commonly performed surgical technique (13 eyelids, 68.4%). The lateral tarsal strip procedure was used to horizontally tighten three eyelids (15.8%). At the time of the procedure, one of these eyelids (5.3%) also received an adjuvant suborbicularis oculi fat lift. Autogenous dermis fat grafting was performed on two lower eyelids (10.5%), whose retraction was caused by fat and soft tissue loss. Cosmetic outcomes were satisfactory in all cases. Conclusions To achieve satisfactory surgical outcomes, surgeons should adopt an approach based on the severity of lower eyelid retraction. Mild lower eyelid retraction can be corrected without grafts. When retraction is severe and exceeds 2 mm, spacer grafts that push the lower eyelid margin upwards and support it from below are required. PMID:28682021

Causes and Surgical Outcomes of Lower Eyelid Retraction.

PubMed

Kim, Kun Hae; Baek, Ji Sun; Lee, Saem; Lee, Jung Hye; Choi, Hye Sun; Kim, Sung Joo; Jang, Jae Woo

2017-08-01

To investigate the causes of lower eyelid retraction and evaluate the outcomes of various surgical procedures. We conducted a retrospective medical record review of patients who underwent lower eyelid retraction surgery performed by a single surgeon at Kim's Eye Hospital between 2006 and 2013. We investigated the causes of lower eyelid retraction, clinical history, characteristics, treatment, and surgical outcomes. Preoperative and postoperative margin reflex distance 2 and inferior scleral show were measured for each eyelid. Success was defined as a positive eyelid elevation and a decrease in inferior scleral show. A total of 19 lower eyelids were treated in 14 patients with lower eyelid retraction. For cosmetic reasons, surgical correction for congenital lower eyelid retraction was performed on seven eyelids (36.8%). Ten eyelids (52.6%) exhibited secondary lower eyelid retraction after surgery. One eyelid (5.3%) was affected by facial palsy and one eyelid (5.3%) exhibited exophthalmos of an unknown origin. We adopted a selective approach based on lower eyelid retraction severity. Spacer grafting via a subconjunctival approach was the most commonly performed surgical technique (13 eyelids, 68.4%). The lateral tarsal strip procedure was used to horizontally tighten three eyelids (15.8%). At the time of the procedure, one of these eyelids (5.3%) also received an adjuvant suborbicularis oculi fat lift. Autogenous dermis fat grafting was performed on two lower eyelids (10.5%), whose retraction was caused by fat and soft tissue loss. Cosmetic outcomes were satisfactory in all cases. To achieve satisfactory surgical outcomes, surgeons should adopt an approach based on the severity of lower eyelid retraction. Mild lower eyelid retraction can be corrected without grafts. When retraction is severe and exceeds 2 mm, spacer grafts that push the lower eyelid margin upwards and support it from below are required. © 2017 The Korean Ophthalmological Society

Cross-cultural adaptation and validation of the Protective Nursing Advocacy Scale for Brazilian nurses 1

PubMed Central

Tomaschewski-Barlem, Jamila Geri; Lunardi, Valéria Lerch; Barlem, Edison Luiz Devos; da Silveira, Rosemary Silva; Dalmolin, Graziele de Lima; Ramos, Aline Marcelino

2015-01-01

Abstract Objective: to adapt culturally and validate the Protective Nursing Advocacy Scale for Brazilian nurses. Method: methodological study carried out with 153 nurses from two hospitals in the South region of Brazil, one public and the other philanthropic. The cross-cultural adaptation of the Protective Nursing Advocacy Scale was performed according to international standards, and its validation was carried out for use in the Brazilian context, by means of factor analysis and Cronbach's alpha as measure of internal consistency. Results: by means of evaluation by a committee of experts and application of pre-test, face validity and content validity of the instrument were considered satisfactory. From the factor analysis, five constructs were identified: negative implications of the advocacy practice, advocacy actions, facilitators of the advocacy practice, perceptions that favor practice advocacy and barriers to advocacy practice. The instrument showed satisfactory internal consistency, with Cronbach's alpha values ranging from 0.70 to 0.87. Conclusion: it was concluded that the Protective Nursing Advocacy Scale - Brazilian version, is a valid and reliable instrument for use in the evaluation of beliefs and actions of health advocacy, performed by Brazilian nurses in their professional practice environment. PMID:26444169

Reuse of steel slag in bituminous paving mixtures.

PubMed

Sorlini, Sabrina; Sanzeni, Alex; Rondi, Luca

2012-03-30

This paper presents a comprehensive study to evaluate the mechanical properties and environmental suitability of electric arc furnace (EAF) steel slag in bituminous paving mixtures. A variety of tests were executed on samples of EAF slag to characterize the physical, geometrical, mechanical and chemical properties as required by UNI EN specifications, focusing additionally on the volumetric expansion associated with hydration of free CaO and MgO. Five bituminous mixtures of aggregates for flexible road pavement were designed containing up to 40% of EAF slag and were tested to determine Marshall stability and indirect tensile strength. The leaching behaviour of slag samples and bituminous mixtures was evaluated according to the UNI EN leaching test. The tested slag showed satisfactory physical and mechanical properties and a release of pollutants generally below the limits set by the Italian code. Tests on volume stability of fresh materials confirmed that a period of 2-3 months is necessary to reduce effects of oxides hydration. The results of tests performed on bituminous mixtures with EAF slag were comparable with the performance of mixtures containing natural aggregates and the leaching tests provided satisfactory results. Copyright © 2012 Elsevier B.V. All rights reserved.

Factor Analysis of the Brazilian Version of UPPS Impulsive Behavior Scale

PubMed Central

Sediyama, Cristina Y. N.; Moura, Ricardo; Garcia, Marina S.; da Silva, Antonio G.; Soraggi, Carolina; Neves, Fernando S.; Albuquerque, Maicon R.; Whiteside, Setephen P.; Malloy-Diniz, Leandro F.

2017-01-01

Objective: To examine the internal consistency and factor structure of the Brazilian adaptation of the UPPS Impulsive Behavior Scale. Methods: UPPS is a self-report scale composed by 40 items assessing four factors of impulsivity: (a) urgency, (b) lack of premeditation; (c) lack of perseverance; (d) sensation seeking. In the present study 384 participants (278 women and 106 men), who were recruited from schools, universities, leisure centers and workplaces fulfilled the UPPS scale. An exploratory factor analysis was performed by using Varimax factor rotation and Kaiser Normalization, and we also conducted two confirmatory analyses to test the independency of the UPPS components found in previous analysis. Results: Results showed a decrease in mean UPPS total scores with age and this analysis showed that the youngest participants (below 30 years) scored significantly higher than the other groups over 30 years. No difference in gender was found. Cronbach’s alpha, results indicated satisfactory values for all subscales, with similar high values for the subscales and confirmatory factor analysis indexes also indicated a poor model fit. The results of two exploratory factor analysis were satisfactory. Conclusion: Our results showed that the Portuguese version has the same four-factor structure of the original and previous translations of the UPPS. PMID:28484414

Orienting Arc Lamps for Longest Life

NASA Technical Reports Server (NTRS)

Kiss, J.

1985-01-01

Temperature distribution strongly affects performance. Tests on floodlights for Space Shuttle payload bay show useful life of metal halide dc arc lamp prolonged by mounting "anode down" and wiring for maximum heat conduction away from electrodes. Anode-down configuration, anode and cathode temperatures stabilize at 333 degrees and 313 degrees C, respectively, after 1 hour of operation. Temperatures both below limit for quartz-to-metal seals, and lamps able to withstand a 2,000-hour life test with satisfactory light output at end.

3D-QSAR study and design of 4-hydroxyamino α-pyranone carboxamide analogues as potential anti-HCV agents

NASA Astrophysics Data System (ADS)

Li, Wenlian; Xiao, Faqi; Zhou, Mingming; Jiang, Xuejin; Liu, Jun; Si, Hongzong; Xie, Meng; Ma, Xiuting; Duan, Yunbo; Zhai, Honglin

2016-09-01

The three dimensional-quantitative structure activity relationship (3D-QSAR) study was performed on a series of 4-hydroxyamino α-pyranone carboxamide analogues using comparative molecular similarity indices analysis (COMSIA). The purpose of the present study was to develop a satisfactory model providing a reliable prediction based on 4-hydroxyamino α-pyranone carboxamide analogues as anti-HCV (hepatitis C virus) inhibitors. The statistical results and the results of validation of this optimum COMSIA model were satisfactory. Furthermore, analysis of the contour maps helped to provide guidelines for finding structural requirement. Therefore, the satisfactory results from this study may provide useful guidelines for drug development of anti-HCV inhibitors.

An interactive medical image segmentation framework using iterative refinement.

PubMed

Kalshetti, Pratik; Bundele, Manas; Rahangdale, Parag; Jangra, Dinesh; Chattopadhyay, Chiranjoy; Harit, Gaurav; Elhence, Abhay

2017-04-01

Segmentation is often performed on medical images for identifying diseases in clinical evaluation. Hence it has become one of the major research areas. Conventional image segmentation techniques are unable to provide satisfactory segmentation results for medical images as they contain irregularities. They need to be pre-processed before segmentation. In order to obtain the most suitable method for medical image segmentation, we propose MIST (Medical Image Segmentation Tool), a two stage algorithm. The first stage automatically generates a binary marker image of the region of interest using mathematical morphology. This marker serves as the mask image for the second stage which uses GrabCut to yield an efficient segmented result. The obtained result can be further refined by user interaction, which can be done using the proposed Graphical User Interface (GUI). Experimental results show that the proposed method is accurate and provides satisfactory segmentation results with minimum user interaction on medical as well as natural images. Copyright © 2017 Elsevier Ltd. All rights reserved.

Immobilization of Glucose Oxidase on a Carbon Nanotubes/Dendrimer-Ferrocene Modified Electrode for Reagentless Glucose Biosensing.

PubMed

Zhou, Juan; Li, Huan; Yang, Huasong; Cheng, Hui; Lai, Guosong

2017-01-01

Ferrocene-grafted dendrimer was covalently linked to the surface of a carbon nanotubes (CNTs)-chitosan (CS) nanocomposite modified electrode for immobilizing high-content glucose oxidase (GOx), which resulted in the successful development a novel reagentless glucose biosensor. Electrochemical impedance spectroscopy, cyclic voltammetry, and amperometry were used to characterize the preparation process and the enzymatically catalytic response of this biosensor. Due to the excellent electron transfer acceleration of the CNTs and the high-content loading of the GOx biomolecule and ferrocene mediator on the electrode matrix, this biosensor showed excellent analytical performance such as fast response time less than 10 s, wide linear range from 0.02 to 2.91 mM and low detection limit down to 7.5 μM as well as satisfactory stability and reproducibility toward the amperometric glucose determination. In addition, satisfactory result was obtained when it was used for the glucose measurements in human blood samples. Thus this biosensor provides great potentials for practical applications.

Effectiveness of Educational Programs on Nutritional Behavior in Addicts Referring to Baharan Hospital, Zahedan (Eastern of IR Iran)

PubMed Central

Karajibani, Mansour; Montazerifar, Farzaneh; Dashipour, Alireza; Lashkaripour, Kobra; Abery, Maryam; Salari, Sajedeh

2014-01-01

Background: There are many factors which affect nutritional status of addicted such as lack o f knowledge, incorrect attitude toward modification of food pattern, and careless to food intake. Objectives: The aim of this study was to determine the effectiveness of educational program on nutritional behavior in addicts referring to Baharan hospital in Zahedan. Patients and Methods: Thirty-six addict patients were selected randomly. After recording general demographic data of patients, nutritional behaviors were determined. To determine the effectiveness of nutritional educational program, pre and post-tests were performed. Evaluation of nutritional behavior was determined as poor, fair and satisfactory levels. Statically analysis was performed by SPSS software. Results: Most addict patients had a medium level of education. Improvement in knowledge, attitude and practice (KAP) of patients after intervention was observed as follows; decreasing KAP in poor level (2.8% vs. 30.6%), (3% vs. 50%), (25% vs. 80.6%), respectively; also, increasing KAP in fair level (7% vs. 55.6 %), (15% vs. 15%), (19% vs. 7%), respectively and increasing KAP in satisfactory levels (77.8% vs. 13.8%), (50% vs. 8.3%), and (22.2% vs. 0%), respectively (P < 0.0001). There was a significant difference regarding the grade of KAP in patients based on gender, marital status, and education level after education (P < 0.0001). Conclusions: This study showed that nutritional KAP was improved in addicts. After intervention, there was a significant difference in the score of knowledge, attitude, and practice scores in patients in the current study. KAP was improved in patients after intervention including; decreased KAP in poor level and increased KAP in fair and satisfactory levels. This finding indicates that addict patients would like to modify their life style. PMID:25032162

Cohabitation with farm animals in urban households with and without occupational farm work: associations between participation in educational activities and good hygiene practices in at-risk households cohabiting with farm animals.

PubMed

Somphou, Phoupasong; Takano, Takehito; Nakamura, Keiko

2008-11-01

This study was performed to investigate patterns of cohabitation with farm animals in urban households in Vientiane, Lao People's Democratic Republic, with regard to animal-to-human disease transmission. We also investigated the association between participation in hygiene-related educational activities and good hygiene practices in households with or without cohabitation with animals. A survey regarding cohabitation with animals, socioeconomic characteristics and participation in educational activities was conducted among 1,497 households randomly sampled from urban districts of Vientiane in 2001. Rates of satisfactory performance of recommended good hygiene practices according to a program commencing in 1996 were compared among households cohabiting with animals with or without participation in educational activities (reference group). Even among households not engaged in agriculture as a major source of income, 54.4, 34.9, 7.9, 3.1 and 35.7% cohabited with chickens, ducks, cattle, buffaloes and dogs, respectively. The percentage of households fulfilling the recommendations for good hygiene practices was 56.7%. The rates of satisfactory hygiene practices among households participating in health education and cohabitating with chickens, ducks or cattle were greater than those in the reference group (OR = 1.7, 95%CI = 1.2, 2.3; OR = 2.0, 95%CI = 1.3, 3.0; OR = 2.3, 95%CI = 1.0, 4.9) regardless of socioeconomic factors. Households cohabiting with animals showed poorer rates of satisfactory hygiene practices than those without animals. Cohabitation with farm animals is common in urban Vientiane regardless of household involvement in agriculture. Further effort is required to improve hygiene conditions, despite some positive effects of health education even in households cohabiting with animals.

36 CFR 223.35 - Performance bond.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Performance bond. 223.35... Sale Contracts Contract Conditions and Provisions § 223.35 Performance bond. Timber sale contracts may require the purchaser to furnish a performance bond for satisfactory compliance with its terms. ...

36 CFR 223.35 - Performance bond.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Performance bond. 223.35... Sale Contracts Contract Conditions and Provisions § 223.35 Performance bond. Timber sale contracts may require the purchaser to furnish a performance bond for satisfactory compliance with its terms. ...

13 CFR 120.434 - What are SBA's requirements for loan pledges?

Code of Federal Regulations, 2012 CFR

2012-01-01

... factors, will be considered in determining satisfactory SBA performance. Other factors may include, but... default rate, purchase rate and loss rate), loan volume to the extent that it impacts performance measures...

An improved harmony search algorithm with dynamically varying bandwidth

NASA Astrophysics Data System (ADS)

Kalivarapu, J.; Jain, S.; Bag, S.

2016-07-01

The present work demonstrates a new variant of the harmony search (HS) algorithm where bandwidth (BW) is one of the deciding factors for the time complexity and the performance of the algorithm. The BW needs to have both explorative and exploitative characteristics. The ideology is to use a large BW to search in the full domain and to adjust the BW dynamically closer to the optimal solution. After trying a series of approaches, a methodology inspired by the functioning of a low-pass filter showed satisfactory results. This approach was implemented in the self-adaptive improved harmony search (SIHS) algorithm and tested on several benchmark functions. Compared to the existing HS algorithm and its variants, SIHS showed better performance on most of the test functions. Thereafter, the algorithm was applied to geometric parameter optimization of a friction stir welding tool.

Photometric determination of phosphorus in mineralized biodiesel using a micro-flow-batch analyzer with solenoid micro-pumps.

PubMed

Lima, Marcelo B; Barreto, Inakã S; Andrade, Stéfani Iury E; Neta, Maria S S; Almeida, Luciano F; Araújo, Mário C U

2012-08-30

A method for the determination of phosphorus in mineralized biodiesel using a micro-flow-batch analyzer (μFBA) with solenoid micro-pumps was proposed. The samples were mineralized using an ashing procedure at 550 °C followed by dissolution of the residue. The determination of phosphorus was performed by employing the well-known molybdenum blue method. The measures of the absorbance were performed at 850 nm using an InfraRed LED integrated into the μFBA. Comparing with the reference method, no statistically significant differences were observed when applying the paired t-test at a 95% confidence level. Recovery study shows results between 97.9% and 105.8%. The proposed microsystem using solenoid micro-pumps presented satisfactory robustness and high sampling rate (190 h(-1)), with satisfactory reproducibility (relative standard deviation <4.5%, n=3), low reagents consumption (32 μL per analysis) and cost to build the device. Moreover, μFBA presents limit of detection (0.014 mg Kg(-1)), precision and accuracy compatible with the biodiesel regulations that establish a maximum concentration of 10 mg Kg(-1) (Brazil, USA, EU), suggesting that it is a good alternative for the determination of phosphorus in biodiesel. Copyright © 2012 Elsevier B.V. All rights reserved.

[Ambulatory surgical treatment for breast carcinoma].

PubMed

Barillari, P; Leuzzi, R; Bassiri-Gharb, A; D'Angelo, F; Aurello, P; Naticchioni, E

2001-02-01

The aim of the study is to demonstrate the feasibility and the oncologic effectiveness of quadrantectomy plus sentinel node biopsy performed under local anesthesia, and to demonstrate the economic and psychologic advantages. From October 1996 to March 2000, 71 patients affected with clinical T1 N0 breast cancer, underwent quadrantectomy or tumor resection plus sentinel node biopsy and clinically suspicion axillary nodes biopsy, under local anesthesia at the Casa di Cura "Villa Mafalda" in Rome. Twenty tumors were T1a, 26 T1b e 25 T1c. A mean of 2 sentinel nodes (range 1-4) and a mean of 8 axillary nodes were removed during the procedure. In 2 cases sentinel nodes were not identified. Intraoperative histologic examination showed metastatic sentinel nodes in 11 cases. An axillary node dissection was performed in all cases (>12 nodes) and no other metastatic nodes were found. In all patients clinically suspected nodes were removed. In two cases no evidence of metastasis was found in sentinel nodes, while histologic examination revealed in a patient micrometastasis in one node, and in another patient two metastatic nodes. Fifty-three patients rated the overall surgical, anesthetic and recovery experience as "very satisfactory", 13 "satisfactory" and 5 "unsatisfactory". Patients typically expressed their pleasure at the possibility to return home and stressed the ease of recovery.

36 CFR 9.13 - Performance bond.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Performance bond. 9.13... MINERALS MANAGEMENT Mining and Mining Claims § 9.13 Performance bond. (a) Upon approval of a plan of operations the operator shall be required to file a suitable performance bond with satisfactory surety...

36 CFR 9.48 - Performance bond.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Performance bond. 9.48... MINERALS MANAGEMENT Non-Federal Oil and Gas Rights § 9.48 Performance bond. (a) Prior to approval of a plan of operations, the operator shall be required to file a suitable performance bond with satisfactory...

36 CFR 9.13 - Performance bond.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Performance bond. 9.13... MINERALS MANAGEMENT Mining and Mining Claims § 9.13 Performance bond. (a) Upon approval of a plan of operations the operator shall be required to file a suitable performance bond with satisfactory surety...

36 CFR 9.48 - Performance bond.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Performance bond. 9.48... MINERALS MANAGEMENT Non-Federal Oil and Gas Rights § 9.48 Performance bond. (a) Prior to approval of a plan of operations, the operator shall be required to file a suitable performance bond with satisfactory...

36 CFR 9.13 - Performance bond.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Performance bond. 9.13... MINERALS MANAGEMENT Mining and Mining Claims § 9.13 Performance bond. (a) Upon approval of a plan of operations the operator shall be required to file a suitable performance bond with satisfactory surety...

Experimental test results of a generalized parameter fuel control

NASA Technical Reports Server (NTRS)

Batterton, P. G.; Gold, H.

1973-01-01

Considerable interest has been generated recently in low cost jet propulsion systems. One of the more complicated components of jet engines is the fuel control. Results of an effort to develop a simpler hydromechanical fuel control are presented. This prototype fuel control was installed on a J85-GE-13 jet engine. Results show that the fuel control provided satisfactory engine performance at sea level static conditions over its normal nonafterburning operating range, including startup. Results of both bench and engine tests are presented; the difficulties encountered are described.

Multisynchronization of chaotic oscillators via nonlinear observer approach.

PubMed

Aguilar-López, Ricardo; Martínez-Guerra, Rafael; Mata-Machuca, Juan L

2014-01-01

The goal of this work is to synchronize a class of chaotic oscillators in a master-slave scheme, under different initial conditions, considering several slaves systems. The Chen oscillator is employed as a benchmark model and a nonlinear observer is proposed to reach synchronicity between the master and the slaves' oscillators. The proposed observer contains a proportional and integral form of a bounded function of the synchronization error in order to provide asymptotic synchronization with a satisfactory performance. Numerical experiments were carried out to show the operation of the considered methodology.

Multisynchronization of Chaotic Oscillators via Nonlinear Observer Approach

PubMed Central

Aguilar-López, Ricardo; Martínez-Guerra, Rafael; Mata-Machuca, Juan L.

2014-01-01

The goal of this work is to synchronize a class of chaotic oscillators in a master-slave scheme, under different initial conditions, considering several slaves systems. The Chen oscillator is employed as a benchmark model and a nonlinear observer is proposed to reach synchronicity between the master and the slaves' oscillators. The proposed observer contains a proportional and integral form of a bounded function of the synchronization error in order to provide asymptotic synchronization with a satisfactory performance. Numerical experiments were carried out to show the operation of the considered methodology. PMID:24578671

Digital control of the Kuiper Airborne Observatory telescope

NASA Technical Reports Server (NTRS)

Mccormack, Ann C.; Snyder, Philip K.

1989-01-01

The feasibility of using a digital controller to stabilize a telescope mounted in an airplane is investigated. The telescope is a 30 in. infrared telescope mounted aboard a NASA C-141 aircraft known as the Kuiper Airborne Observatory. Current efforts to refurbish the 14-year-old compensation system have led to considering a digital controller. A typical digital controller is modeled and added into the telescope system model. This model is simulated on a computer to generate the Bode plots and time responses which determine system stability and performance parameters. Important aspects of digital control system hardware are discussed. A summary of the findings shows that a digital control system would result in satisfactory telescope performance.

An Application to the Prediction of LOD Change Based on General Regression Neural Network

NASA Astrophysics Data System (ADS)

Zhang, X. H.; Wang, Q. J.; Zhu, J. J.; Zhang, H.

2011-07-01

Traditional prediction of the LOD (length of day) change was based on linear models, such as the least square model and the autoregressive technique, etc. Due to the complex non-linear features of the LOD variation, the performances of the linear model predictors are not fully satisfactory. This paper applies a non-linear neural network - general regression neural network (GRNN) model to forecast the LOD change, and the results are analyzed and compared with those obtained with the back propagation neural network and other models. The comparison shows that the performance of the GRNN model in the prediction of the LOD change is efficient and feasible.

Generalization Performance of Regularized Ranking With Multiscale Kernels.

PubMed

Zhou, Yicong; Chen, Hong; Lan, Rushi; Pan, Zhibin

2016-05-01

The regularized kernel method for the ranking problem has attracted increasing attentions in machine learning. The previous regularized ranking algorithms are usually based on reproducing kernel Hilbert spaces with a single kernel. In this paper, we go beyond this framework by investigating the generalization performance of the regularized ranking with multiscale kernels. A novel ranking algorithm with multiscale kernels is proposed and its representer theorem is proved. We establish the upper bound of the generalization error in terms of the complexity of hypothesis spaces. It shows that the multiscale ranking algorithm can achieve satisfactory learning rates under mild conditions. Experiments demonstrate the effectiveness of the proposed method for drug discovery and recommendation tasks.

PIN architecture for ultrasensitive organic thin film photoconductors.

PubMed

Jin, Zhiwen; Wang, Jizheng

2014-06-17

Organic thin film photoconductors (OTFPs) are expected to have wide applications in the field of optical communications, artificial vision and biomedical sensing due to their great advantages of high flexibility and low-cost large-area fabrication. However, their performances are not satisfactory at present: the value of responsivity (R), the parameter that measures the sensitivity of a photoconductor to light, is below 1 AW(-1). We believe such poor performance is resulted from an intrinsic self-limited effect of present bare blend based device structure. Here we designed a PIN architecture for OTFPs, the PIN device exhibits a significantly improved high R value of 96.5 AW(-1). The PIN architecture and the performance the PIN device shows here should represent an important step in the development of OTFPs.

PIN architecture for ultrasensitive organic thin film photoconductors

PubMed Central

Jin, Zhiwen; Wang, Jizheng

2014-01-01

Organic thin film photoconductors (OTFPs) are expected to have wide applications in the field of optical communications, artificial vision and biomedical sensing due to their great advantages of high flexibility and low-cost large-area fabrication. However, their performances are not satisfactory at present: the value of responsivity (R), the parameter that measures the sensitivity of a photoconductor to light, is below 1 AW−1. We believe such poor performance is resulted from an intrinsic self-limited effect of present bare blend based device structure. Here we designed a PIN architecture for OTFPs, the PIN device exhibits a significantly improved high R value of 96.5 AW−1. The PIN architecture and the performance the PIN device shows here should represent an important step in the development of OTFPs. PMID:24936952

Adrenal venous sampling: the learning curve of a single interventionalist with 282 consecutive procedures.

PubMed

Jakobsson, Hugo; Farmaki, Katerina; Sakinis, Augustinas; Ehn, Olof; Johannsson, Gudmundur; Ragnarsson, Oskar

2018-01-01

Primary aldosteronism (PA) is a common cause of secondary hypertension. Adrenal venous sampling (AVS) is the gold standard for assessing laterality of PA, which is of paramount importance to decide adequate treatment. AVS is a technically complicated procedure with success rates ranging between 30% and 96%. The aim of this study was to investigate the success rate of AVS over time, performed by a single interventionalist. This was a retrospective study based on consecutive AVS procedures performed by a single operator between September 2005 and June 2016. Data on serum concentrations of aldosterone and cortisol from right and left adrenal vein, inferior vena cava, and peripheral vein were collected and selectivity index (SI) calculated. Successful AVS was defined as SI > 5. In total, 282 AVS procedures were performed on 269 patients, 168 men (62%) and 101 women (38%), with a mean age of 55±11 years (range, 26-78 years). Out of 282 AVS procedures, 259 were successful, giving an overall success rate of 92%. The most common reason for failure was inability to localize the right adrenal vein (n=16; 76%). The success rates were 63%, 82%, and 94% during the first, second, and third years, respectively. During the last 8 years the success rate was 95%, and on average 27 procedures were performed annually. Satisfactory AVS success rate was achieved after approximately 36 procedures and satisfactory success rate was maintained by performing approximately 27 procedures annually. AVS should be limited to few operators that perform sufficiently large number of procedures to achieve, and maintain, satisfactory AVS success rate.

20 CFR 627.422 - Selection of service providers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... which provide training, such performance measures as retention in training, training completion, job... listed in paragraph (d) of this section; and may, if appropriate, be documented and described in the Job... ability to meet performance goals; (3) A satisfactory record of past performance (in job training, basic...

12 CFR 345.28 - Assigned ratings.

Code of Federal Regulations, 2010 CFR

2010-01-01

...,” “satisfactory,” “needs to improve,” or “substantial noncompliance” based on the bank's performance under the lending, investment and service tests, the community development test, the small bank performance... evaluation of a bank's CRA performance is adversely affected by evidence of discriminatory or other illegal...

Internet Gaming Disorder and Well-Being: A Scale Validation.

PubMed

Sarda, Elisa; Bègue, Laurent; Bry, Clémentine; Gentile, Douglas

2016-11-01

The overuse of online games is known to be inversely related to various indicators of well-being. This article validates the DSM-5 criteria of internet gaming disorder (IGD), and analyzes its links with five indicators of well-being: life satisfaction, loneliness, anxiety, depression, and academic performance in a French-speaking sample of 693 gamers. Exploratory and confirmatory factor analyses showed a one-factor structure of IGD criteria. The IGD scale showed satisfactory validity and reliability and was related in a consistent way with well-being measures. The IGD scale appears to be an appropriate measure to assess video game addiction and will contribute to increase the comparability of international research on video game addiction.

13 CFR 120.433 - What are SBA's other requirements for sales and sales of participating interests?

Code of Federal Regulations, 2012 CFR

2012-01-01

..., among other factors, will be considered in determining satisfactory SBA performance. Other factors may... (like default rate, purchase rate and loss rate), loan volume to the extent that it impacts performance...

Transformational, Transactional Leadership Styles and Job Performance of Academic Leaders

ERIC Educational Resources Information Center

Mahdinezhad, Maryam; Bin Suandi, Turiman; bin Silong, Abu Daud; Omar, Zoharah Binti

2013-01-01

In higher learning education, the performance is influenced by many factors. Effective leadership has an imperative role in the better performance and growth of the organization. Yet, several performance efforts were unsuccessful as a result of factors such as satisfactory leadership style of leaders. This study was carried out to identify the…

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2012-10-01 2012-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 2 2010-10-01 2010-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2013-10-01 2013-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2011-10-01 2011-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

49 CFR 179.400-4 - Insulation system and performance standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of heat transfer used for determining the satisfactory performance of the insulation system of a... 49 Transportation 3 2014-10-01 2014-10-01 false Insulation system and performance standard. 179... DOT-113 and 107A) § 179.400-4 Insulation system and performance standard. (a) For the purposes of this...

43 CFR 23.9 - Performance bond.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false Performance bond. 23.9 Section 23.9 Public... LANDS § 23.9 Performance bond. (a)(1) Upon approval of an exploration plan or mining plan, the operator shall be required to file a suitable performance bond of not less than $2,000 with satisfactory surety...

43 CFR 23.9 - Performance bond.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Performance bond. 23.9 Section 23.9 Public... LANDS § 23.9 Performance bond. (a)(1) Upon approval of an exploration plan or mining plan, the operator shall be required to file a suitable performance bond of not less than $2,000 with satisfactory surety...

43 CFR 23.9 - Performance bond.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Performance bond. 23.9 Section 23.9 Public... LANDS § 23.9 Performance bond. (a)(1) Upon approval of an exploration plan or mining plan, the operator shall be required to file a suitable performance bond of not less than $2,000 with satisfactory surety...

43 CFR 23.9 - Performance bond.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Performance bond. 23.9 Section 23.9 Public... LANDS § 23.9 Performance bond. (a)(1) Upon approval of an exploration plan or mining plan, the operator shall be required to file a suitable performance bond of not less than $2,000 with satisfactory surety...

Feasibility of spirometry in preschool children.

PubMed

Veras, Tiago Neves; Pinto, Leonardo Araujo

2011-01-01

To determine the rate at which satisfactory spirometry results are obtained (spirometry success rate) in preschool children. We analyzed the spirometry results of children ≤ 6 years of age. All tests were conducted between June of 2009 and February of 2010 in the Pulmonary Function Laboratory of the Hospital Infantil Jeser Amarante Faria, located in the city of Joinville, Brazil. The spirometry program employed features an animated incentive (soap bubbles). The procedures were performed by a pediatric pulmonologist, in accordance with the reproducibility and acceptability criteria recommended by the American Thoracic Society. We attempted to achieve an expiratory time of at least 1 s. The following parameters were measured: FVC, FEV0.5, FEV1, and the FEV1/FVC ratio. Our sample comprised 74 children. The spirometry success rate was 82%. Although the performance improved with age, the difference between younger and older children was not significant (p > 0.05). An average of 6.6 attempts/test were needed in order to achieve acceptable, reproducible curves. All 61 successful tests produced satisfactory FEV0.5 and FEV1 values. By calculating Z scores, we found that 21.6% of the children presented with an obstructive pattern. In our sample, the spirometry success rate was high, showing that spirometry is a valid method for assessing pulmonary function in preschool children. The high success rate in our sample might be attributable to the use of an incentive and to the fact that the tests were performed by professionals specializing in pediatrics.

The development of a new questionnaire for cognitive complaints in vertigo: the Neuropsychological Vertigo Inventory (NVI).

PubMed

Lacroix, Emilie; Deggouj, Naima; Salvaggio, Samuel; Wiener, Valérie; Debue, Michel; Edwards, Martin Gareth

2016-12-01

Vertigo patients frequently complain of emotional and associated cognitive problems, yet currently, there is no satisfactory questionnaire to measure these associated problems. In the present paper, we propose a new internet-based Neuropsychological Vertigo Inventory (NVI; French) that evaluates attention, memory, emotion, space perception, time perception, vision, and motor abilities. The questionnaire was created using four steps: (1) open interviews with patients suffering from vertigo; (2) semi-structured interviews with an analysis grid to quantify and define the various cognitive and emotional problems reported by the patients; (3) a first version of an internet questionnaire tested on 108 vertigo participants; and (4) the selection of subscale items using principal component analyses (PCA). From the development phase, the revised NVI was composed of seven subscales, each with four items (28 items). In the validation phase, Cronbach's alphas were performed on the revised NVI for total and each subscale score, and to test extreme groups validity, the analyses of covariance (ANCOVAs) taking into account age were performed between 108 vertigo and 104 non-vertigo participants. The Cronbach's alphas showed good to satisfactory coefficients for the total and for all subscale scores, demonstrating acceptable reliability. The extreme groups validity analyses (ANCOVAs) were reliable for the total scale and for four subscales. Supplementary analyses showed no effect of hearing difficulties and an inverse age effect for attention and emotion subscales, with reduced problems with increased age in the vertigo participants. The NVI provides a useful new questionnaire to determine cognitive and emotional neuropsychological complaints that are associated with vertigo.

Facile synthesis of polypyrrole functionalized nickel foam with catalytic activity comparable to Pt for the poly-generation of hydrogen and electricity

NASA Astrophysics Data System (ADS)

Tang, Tiantian; Li, Kan; Shen, Zhemin; Sun, Tonghua; Wang, Yalin; Jia, Jinping

2016-01-01

Polypyrrole functionalized nickel foam is facilely prepared through the potentiostatic electrodeposition. The PPy-functionalized Ni foam functions as a hydrogen-evolution cathode in a rotating disk photocatalytic fuel cell, in which hydrogen energy and electric power are generated by consuming organic wastes. The PPy-functionalized Ni foam cathode exhibits stable catalytic activities after thirteen continuous runs. Compared with net or plate structure, the Ni foam with a unique three-dimensional reticulate structure is conducive to the electrodeposition of PPy. Compared with Pt-group electrode, PPy-coated Ni foam shows a satisfactory catalytic performance for the H2 evolution. The combination of PPy and Ni forms a synergistic effect for the rapid trapping and removal of proton from solution and the catalytic reduction of proton to hydrogen. The PPy-functionalized Ni foam could be applied in photocatalytic and photoelectrochemical generation of H2. In all, we report a low cost, high efficient and earth abundant PPy-functionalized Ni foam with a satisfactory catalytic activities comparable to Pt for the practical application of poly-generation of hydrogen and electricity.

USE OF FAST GC/TOFMS AS REFERENCE STANDARD FOR FIELD COMPARISON STUDIES WITH ON-SITE INSTRUMENTS

EPA Science Inventory

A faster reference standard for field comparison studies of portable gas chromatographs (PGC) is needed. A performance evaluation of a high-speed GCMS (FGC/MS) system conducted during 1998 demonstrated generally satisfactory performance, but it was evident that performance of b...

Evaluation of Temperature-Dependent Effective Material Properties and Performance of a Thermoelectric Module

NASA Astrophysics Data System (ADS)

Chien, Heng-Chieh; Chu, En-Ting; Hsieh, Huey-Lin; Huang, Jing-Yi; Wu, Sheng-Tsai; Dai, Ming-Ji; Liu, Chun-Kai; Yao, Da-Jeng

2013-07-01

We devised a novel method to evaluate the temperature-dependent effective properties of a thermoelectric module (TEM): Seebeck coefficient ( S m), internal electrical resistance ( R m), and thermal conductance ( K m). After calculation, the effective properties of the module are converted to the average material properties of a p- n thermoelectric pillar pair inside the module: Seebeck coefficient ( S TE), electrical resistivity ( ρ TE), and thermal conductivity ( k TE). For a commercial thermoelectric module (Altec 1091) chosen to verify the novel method, the measured S TE has a maximum value at bath temperature of 110°C; ρ TE shows a positive linear trend dependent on the bath temperature, and k TE increases slightly with increasing bath temperature. The results show the method to have satisfactory measurement performance in terms of practicability and reliability; the data for tests near 23°C agree with published values.

Microcontroller-based real-time QRS detection.

PubMed

Sun, Y; Suppappola, S; Wrublewski, T A

1992-01-01

The authors describe the design of a system for real-time detection of QRS complexes in the electrocardiogram based on a single-chip microcontroller (Motorola 68HC811). A systematic analysis of the instrumentation requirements for QRS detection and of the various design techniques is also given. Detection algorithms using different nonlinear transforms for the enhancement of QRS complexes are evaluated by using the ECG database of the American Heart Association. The results show that the nonlinear transform involving multiplication of three adjacent, sign-consistent differences in the time domain gives a good performance and a quick response. When implemented with an appropriate sampling rate, this algorithm is also capable of rejecting pacemaker spikes. The eight-bit single-chip microcontroller provides sufficient throughput and shows a satisfactory performance. Implementation of multiple detection algorithms in the same system improves flexibility and reliability. The low chip count in the design also favors maintainability and cost-effectiveness.

Femoral head wedge resection for the treatment of avascular necrosis of the femoral head after pediatric femoral neck fracture: a case report.

PubMed

Kim, Ha Yong; Cha, Yong Han; Choy, Won Sik; Jeung, Sang Wook; Min, Yeon Seung

2018-05-01

This research focuses on femoral head wedge resection for the treatment of avascular necrosis (AVN) of the femoral head. A 9-year-old girl presented to the emergency room complaining of right hip pain that occurred after a pedestrian car accident. After 8 months of internal fixation using cannulated screws for Delbet-type 2 fracture of the femoral neck, AVN of the femoral head developed in the patient. Even though valgus-derotation-extension intertrochanteric osteotomy was performed for the treatment of AVN, it progressed further and femoral head wedge resection was performed to recover the femoral head sphericity. After 3 years of follow-up, radiograph results showed appropriate and satisfactory congruency and containment. This research shows that the treatment of AVN of the femoral head using femoral head wedge resection is an effective method that can yield excellent results.

13 CFR 120.424 - What are the basic conditions a Lender must meet to securitize?

Code of Federal Regulations, 2012 CFR

2012-01-01

... performance, as determined by SBA in its discretion. The Lender's Risk Rating, among other factors, will be considered in determining satisfactory SBA performance. Other factors may include, but are not limited to, on... and loss rate), loan volume to the extent that it impacts performance measures, and other performance...

Efficacy Evaluation of a non-contact automatic articulating paper dispenser in controlling articulating paper microbial contamination

PubMed Central

Li, Yajin; Chen, Litong; Yuan, Fusong; Li, Yugui; Zhou, Yongsheng; Sun, Yuchun

2017-01-01

This study is to quantitatively evaluate the efficacy of using a non-contact automatic articulating paper dispenser for reducing microbial articulating paper contamination. Articulating papers in four-handed mode, non-four-handed mode, and via an automatic articulating paper dispenser were evaluated. An adenosine triphosphate bioluminescence assay was used to quantitatively measure the relative light unit (RLU) values of the rest unused articulating papers in the same package to detect contamination at 4 time points, and triplicate examinations were performed for all three methods. The RLUs were recorded, compared, and evaluated. For four-handed mode (n = 36), the RLUs at the four time points were 2.44, 32.89, 37.89, and 27.22, with a satisfactory rate of 94%. The RLUs for non-four-handed mode (n = 36) were 2.22, 286.44, 299.44, and 493.56, with a satisfactory rate of 36%. The RLUs for using the automatic dispenser (n = 36) were all 0 with a satisfactory rate of 100%. The satisfactory rates were significantly different among three methods. No significant differences were observed in the satisfactory rates for the four time points samples. Contact by gloved hands can cause severe biological contamination of articulating paper. However, by using standard four-handed mode or a non-contact automatic articulating paper dispenser, contamination can be controlled. PMID:28466846

Adaptive control strategies for flexible robotic arm

NASA Technical Reports Server (NTRS)

Bialasiewicz, Jan T.

1993-01-01

The motivation of this research came about when a neural network direct adaptive control scheme was applied to control the tip position of a flexible robotic arm. Satisfactory control performance was not attainable due to the inherent non-minimum phase characteristics of the flexible robotic arm tip. Most of the existing neural network control algorithms are based on the direct method and exhibit very high sensitivity if not unstable closed-loop behavior. Therefore a neural self-tuning control (NSTC) algorithm is developed and applied to this problem and showed promising results. Simulation results of the NSTC scheme and the conventional self-tuning (STR) control scheme are used to examine performance factors such as control tracking mean square error, estimation mean square error, transient response, and steady state response.

Management effectiveness evaluation in protected areas of southern Ecuador.

PubMed

López-Rodríguez, Fausto; Rosado, Daniel

2017-04-01

Protected areas are home to biodiversity, habitats and ecosystem as well as a critical component of human well-being and a generator of leisure-related revenues. However, management is sometimes unsatisfactory and requires new ways of evaluation. Management effectiveness of 36 protected areas in southern Ecuador have been assessed. The protected areas belong to three categories: Heritage of Natural Areas of the Ecuadorian State (PANE), created and funded by the State, Areas of Forest and Protective Vegetation (ABVP), created but no funded by the State, and private reserves, declared and funded by private entities. Management effectiveness was evaluated by answers of managers of the protected areas to questionnaires adapted to the socio-economic and environmental characteristics of the region. Questions were classified into six elements of evaluation: context, planning, inputs, processes, outputs and outcomes as recommended by IUCN. Results were classified into four levels: unsatisfactory, slightly satisfactory, satisfactory and very satisfactory. The PANE areas and private reserves showed higher management effectiveness levels (satisfactory and very satisfactory) than ABVP areas, where slightly satisfactory and unsatisfactory levels prevailed. Resources availability was found as the main reason behind this difference. The extension, age and province of location were found irrelevant. Outputs, inputs and processes require main efforts to improve management effectiveness. Improving planning and input in the PANE areas and inputs and outcomes on ABVP areas is necessary to obtain a similar result in all areas. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Effect of Connecting-passage Diameter on the Performance of a Compression-ignition Engine with a Precombustion Chamber

NASA Technical Reports Server (NTRS)

Moore, C S; Collins, J H

1932-01-01

Results of motoring tests are presented showing the effect of passage diameter on chamber and cylinder compression pressures, maximum pressure differences, and f.m.e.p. over a speed range from 300 to 1,750 r.p.m. Results of engine performance tests are presented which show the effect of passage diameter on m.e.p., explosion pressures, specific fuel consumption, and rates of pressure rise for a range of engine speeds from 500 to 1,500 r.p.m. The cylinder compression pressure, the maximum pressure difference, and the f.m.e.p. decreased rapidly as the passage diameter increased to 29/64 inch, whereas further increase in passage diameter effected only a slight change. The most suitable passage diameter for good engine performance and operating characteristics was 29/64 inch. Passage diameter became less critical with a decrease in engine speed. Therefore, the design should be based on maximum operating speed. Optimum performance and satisfactory combustion control could not be obtained by means of any single diameter of the connecting passage.

Adrenal venous sampling: the learning curve of a single interventionalist with 282 consecutive procedures

PubMed Central

Jakobsson, Hugo; Farmaki, Katerina; Sakinis, Augustinas; Ehn, Olof; Johannsson, Gudmundur; Ragnarsson, Oskar

2018-01-01

PURPOSE Primary aldosteronism (PA) is a common cause of secondary hypertension. Adrenal venous sampling (AVS) is the gold standard for assessing laterality of PA, which is of paramount importance to decide adequate treatment. AVS is a technically complicated procedure with success rates ranging between 30% and 96%. The aim of this study was to investigate the success rate of AVS over time, performed by a single interventionalist. METHODS This was a retrospective study based on consecutive AVS procedures performed by a single operator between September 2005 and June 2016. Data on serum concentrations of aldosterone and cortisol from right and left adrenal vein, inferior vena cava, and peripheral vein were collected and selectivity index (SI) calculated. Successful AVS was defined as SI >5. RESULTS In total, 282 AVS procedures were performed on 269 patients, 168 men (62%) and 101 women (38%), with a mean age of 55±11 years (range, 26–78 years). Out of 282 AVS procedures, 259 were successful, giving an overall success rate of 92%. The most common reason for failure was inability to localize the right adrenal vein (n=16; 76%). The success rates were 63%, 82%, and 94% during the first, second, and third years, respectively. During the last 8 years the success rate was 95%, and on average 27 procedures were performed annually. CONCLUSION Satisfactory AVS success rate was achieved after approximately 36 procedures and satisfactory success rate was maintained by performing approximately 27 procedures annually. AVS should be limited to few operators that perform sufficiently large number of procedures to achieve, and maintain, satisfactory AVS success rate. PMID:29467114

Uncovering the overlapping community structure of complex networks by maximal cliques

NASA Astrophysics Data System (ADS)

Li, Junqiu; Wang, Xingyuan; Cui, Yaozu

2014-12-01

In this paper, a unique algorithm is proposed to detect overlapping communities in the un-weighted and weighted networks with considerable accuracy. The maximal cliques, overlapping vertex, bridge vertex and isolated vertex are introduced. First, all the maximal cliques are extracted by the algorithm based on the deep and bread searching. Then two maximal cliques can be merged into a larger sub-graph by some given rules. In addition, the proposed algorithm successfully finds overlapping vertices and bridge vertices between communities. Experimental results using some real-world networks data show that the performance of the proposed algorithm is satisfactory.

Estimation and optimization of thermal performance of evacuated tube solar collector system

NASA Astrophysics Data System (ADS)

Dikmen, Erkan; Ayaz, Mahir; Ezen, H. Hüseyin; Küçüksille, Ecir U.; Şahin, Arzu Şencan

2014-05-01

In this study, artificial neural networks (ANNs) and adaptive neuro-fuzzy (ANFIS) in order to predict the thermal performance of evacuated tube solar collector system have been used. The experimental data for the training and testing of the networks were used. The results of ANN are compared with ANFIS in which the same data sets are used. The R2-value for the thermal performance values of collector is 0.811914 which can be considered as satisfactory. The results obtained when unknown data were presented to the networks are satisfactory and indicate that the proposed method can successfully be used for the prediction of the thermal performance of evacuated tube solar collectors. In addition, new formulations obtained from ANN are presented for the calculation of the thermal performance. The advantages of this approaches compared to the conventional methods are speed, simplicity, and the capacity of the network to learn from examples. In addition, genetic algorithm (GA) was used to maximize the thermal performance of the system. The optimum working conditions of the system were determined by the GA.

Development of a Dew-Point Generator for Gases Other than Air and Nitrogen and Pressures up to 6 MPa

NASA Astrophysics Data System (ADS)

Bosma, R.; Peruzzi, A.

2012-09-01

A new primary humidity standard is currently being developed at VSL that, in addition to ordinary operation with air and nitrogen at atmospheric pressure, can be operated also with special carrier gases such as natural gas and SF6 and at pressures up to 6 MPa. In this paper, the design and construction of this new primary dew-point generator and the preliminary tests performed on the generator are reported. The results of the first efficiency tests, performed for the dew-point temperature range from -50 °C to 20°C, for pressures up to 0.7MPa and for carrier gas flow rates up to 4L· min-1, showed satisfactory generator performance when used in the single-pass mode, i.e., with no recirculation of the carrier gas.

Sensitive determination of estrogens in environmental waters treated with polymeric ionic liquid-based stir cake sorptive extraction and liquid chromatographic analysis.

PubMed

Chen, Lei; Mei, Meng; Huang, Xiaojia; Yuan, Dongxing

2016-05-15

A simple, sensitive and environmentally friendly method using polymeric ionic liquid-based stir cake sorptive extraction followed by high performance liquid chromatography with diode array detection (HPLC/DAD) has been developed for efficient quantification of six selected estrogens in environmental waters. To extract trace estrogens effectively, a poly (1-ally-3-vinylimidazolium chloride-co-ethylene dimethacrylate) monolithic cake was prepared and used as the sorbent of stir cake sorptive extraction (SCSE). The effects of preparation conditions of sorbent and extraction parameters of SCSE for estrogens were investigated and optimized. Under optimal conditions, the developed method showed satisfactory analytical performance for targeted analytes. Low limits of detection (S/N=3) and quantification limits (S/N=10) were achieved within the range of 0.024-0.057 µg/L and 0.08-0.19 µg/L, respectively. Good linearity of method was obtained for analytes with the correlation coefficients (R(2)) above 0.99. At the same time, satisfactory method repeatability and reproducibility was achieved in terms of intra- and inter-day precisions, respectively. Finally, the established SCSE-HPLC/DAD method was successfully applied for the determination of estrogens in different environmental water samples. Recoveries obtained for the determination of estrogens in spiked samples ranged from 71.2% to 108%, with RSDs below 10% in all cases. Copyright © 2016 Elsevier B.V. All rights reserved.

Integrative Analysis of Prognosis Data on Multiple Cancer Subtypes

PubMed Central

Liu, Jin; Huang, Jian; Zhang, Yawei; Lan, Qing; Rothman, Nathaniel; Zheng, Tongzhang; Ma, Shuangge

2014-01-01

Summary In cancer research, profiling studies have been extensively conducted, searching for genes/SNPs associated with prognosis. Cancer is diverse. Examining the similarity and difference in the genetic basis of multiple subtypes of the same cancer can lead to a better understanding of their connections and distinctions. Classic meta-analysis methods analyze each subtype separately and then compare analysis results across subtypes. Integrative analysis methods, in contrast, analyze the raw data on multiple subtypes simultaneously and can outperform meta-analysis methods. In this study, prognosis data on multiple subtypes of the same cancer are analyzed. An AFT (accelerated failure time) model is adopted to describe survival. The genetic basis of multiple subtypes is described using the heterogeneity model, which allows a gene/SNP to be associated with prognosis of some subtypes but not others. A compound penalization method is developed to identify genes that contain important SNPs associated with prognosis. The proposed method has an intuitive formulation and is realized using an iterative algorithm. Asymptotic properties are rigorously established. Simulation shows that the proposed method has satisfactory performance and outperforms a penalization-based meta-analysis method and a regularized thresholding method. An NHL (non-Hodgkin lymphoma) prognosis study with SNP measurements is analyzed. Genes associated with the three major subtypes, namely DLBCL, FL, and CLL/SLL, are identified. The proposed method identifies genes that are different from alternatives and have important implications and satisfactory prediction performance. PMID:24766212

Assessment of the coordination of integrated health service delivery networks by the primary health care: COPAS questionnaire validation in the Brazilian context.

PubMed

Rodrigues, Ludmila Barbosa Bandeira; Dos Santos, Claudia Benedita; Goyatá, Sueli Leiko Takamatsu; Popolin, Marcela Paschoal; Yamamura, Mellina; Deon, Keila Christiane; Lapão, Luis Miguel Veles; Santos Neto, Marcelino; Uchoa, Severina Alice da Costa; Arcêncio, Ricardo Alexandre

2015-07-22

Health systems organized as networks and coordinated by the Primary Health Care (PHC) may contribute to the improvement of clinical care, sanitary conditions, satisfaction of patients and reduction of local budget expenditures. The aim of this study was to adapt and validate a questionnaire - COPAS - to assess the coordination of Integrated Health Service Delivery Networks by the Primary Health Care. A cross sectional approach was used. The population was pooled from Family Health Strategy healthcare professionals, of the Alfenas region (Minas Gerais, Brazil). Data collection was performed from August to October 2013. The results were checked for the presence of floor and ceiling effects and the internal consistency measured through Cronbach alpha. Construct validity was verified through convergent and discriminant values following Multitrait-Multimethod (MTMM) analysis. Floor and ceiling effects were absent. The internal consistency of the instrument was satisfactory; as was the convergent validity, with a few correlations lower then 0.30. The discriminant validity values of the majority of items, with respect to their own dimension, were found to be higher or significantly higher than their correlations with the dimensions to which they did not belong. The results showed that the COPAS instrument has satisfactory initial psychometric properties and may be used by healthcare managers and workers to assess the PHC coordination performance within the Integrated Health Service Delivery Network.

Effects of Storage of CPD-ADSOL Red Cells at 4C for as Long as 49 Days, Biochemical Modification, Freeze-Preservation, and Post-Wash Storage at 4C for 24 Hours

DTIC Science & Technology

1992-05-27

DPG, P50 levels , and the level of residual hemolysis were satisfactory. Our data show that 42-days is the maximum period that red blood cells can...survival value of only 61%, but ATP, DPG, P50 levels and the level of residual hemolysis were satisfactory. Our data show that 42-days is the maximum...collected red blood cells are stored at 4C for less than 2 weeks, the rejuventation process increases the red cell 2,3 DPG level to 250% of normal and the

42 CFR 493.807 - Condition: Reinstatement of laboratories performing nonwaived testing.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., subspecialties, analyte or test, or voluntarily withdraws its certification under CLIA for the failed specialty, subspecialty, or analyte, the laboratory must then demonstrate sustained satisfactory performance on two... reinstatement for certification and Medicare or Medicaid approval in that specialty, subspecialty, analyte or...

42 CFR 493.807 - Condition: Reinstatement of laboratories performing nonwaived testing.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., subspecialties, analyte or test, or voluntarily withdraws its certification under CLIA for the failed specialty, subspecialty, or analyte, the laboratory must then demonstrate sustained satisfactory performance on two... reinstatement for certification and Medicare or Medicaid approval in that specialty, subspecialty, analyte or...

42 CFR 493.807 - Condition: Reinstatement of laboratories performing nonwaived testing.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., subspecialties, analyte or test, or voluntarily withdraws its certification under CLIA for the failed specialty, subspecialty, or analyte, the laboratory must then demonstrate sustained satisfactory performance on two... reinstatement for certification and Medicare or Medicaid approval in that specialty, subspecialty, analyte or...

Motivation, Compensation, and Performance for Science and Technological Teachers

NASA Astrophysics Data System (ADS)

Abast, R. M.; Sangi, N. M.; Tumanduk, M. S. S. S.; Roring, R.

2018-02-01

This research is operationally aimed to obtain the result of analysis and interpretation about: relationship of achievement motive, compensation with performance at a junior high school in Manado, Indonesia. This research applies a quantitative approach with correlation analysis method. The research was conducted at one junior high school in Manado, Indonesia. The results showed achievement motive at the school teachers is quite high. This result means that, generally, the teachers of the school have a desire to improve achievement; the performance at the school is good enough. This result means that in general, the performance of teachers at the school is increasing, there is a linkage degree and determinative power between the achievement motive with the performance of teachers at the school amounted 0.773% or 77.3%, compensation for the school teachers in Manado is good enough. This result means that the compensation received is satisfactory, there is a linkage degree and determinative power between compensation and performance of the school teachers in Manado amounted to 0.582 or 58.2%.

Showerheads

EPA Pesticide Factsheets

WaterSense labeled showerheads provide a satisfactory shower that is equal to or better than conventional showerheads on the market. WaterSense labeled showerheads are independently certified to meet EPA water efficiency and performance criteria.

Validation and cross-cultural pilot testing of compliance with standard precautions scale: self-administered instrument for clinical nurses.

PubMed

Lam, Simon C

2014-05-01

To perform detailed psychometric testing of the compliance with standard precautions scale (CSPS) in measuring compliance with standard precautions of clinical nurses and to conduct cross-cultural pilot testing and assess the relevance of the CSPS on an international platform. A cross-sectional and correlational design with repeated measures. Nursing students from a local registered nurse training university, nurses from different hospitals in Hong Kong, and experts in an international conference. The psychometric properties of the CSPS were evaluated via internal consistency, 2-week and 3-month test-retest reliability, concurrent validation, and construct validation. The cross-cultural pilot testing and relevance check was examined by experts on infection control from various developed and developing regions. Among 453 participants, 193 were nursing students, 165 were enrolled nurses, and 95 were registered nurses. The results showed that the CSPS had satisfactory reliability (Cronbach α = 0.73; intraclass correlation coefficient, 0.79 for 2-week test-retest and 0.74 for 3-month test-retest) and validity (optimum correlation with criterion measure; r = 0.76, P < .001; satisfactory results on known-group method and hypothesis testing). A total of 19 experts from 16 countries assured that most of the CSPS findings were relevant and globally applicable. The CSPS demonstrated satisfactory results on the basis of the standard international criteria on psychometric testing, which ascertained the reliability and validity of this instrument in measuring the compliance of clinical nurses with standard precautions. The cross-cultural pilot testing further reinforced the instrument's relevance and applicability in most developed and developing regions.

75 FR 63419 - Surety Bond Guarantee Program; Timber Sales

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-15

... timber sale contracts may require the purchaser to furnish a performance bond for satisfactory compliance.... With respect to a Performance Bond involving the sale of timber on land managed by USDA, the Federal... Sales AGENCY: Small Business Administration. ACTION: Proposed rule. SUMMARY: The Small Business...

45 CFR 1303.11 - Suspension on notice and opportunity to show cause.

Code of Federal Regulations, 2010 CFR

2010-10-01

... HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN... her own initiative or upon a satisfactory showing that the grantee has adequately corrected the...

[Educational status and life expectancy in patients with chronic non-communicable diseases].

PubMed

Villarreal-Hernández, Liliana del Sagrario; Romo-Martínez, Jesús Eduardo

2014-01-01

Suffering a non communicable chronic disease in combination with low educational level and low economic income develops a synergy, which contributes to a poor prognostic about the expectancy of life. A better educational level may improve the life expectancy. The objective of this research was to explore this relation. A retrospective cohort study from January 1, 1999, to December 31, 2011, was performed. We included 2306 patients obtained from the information system in mortality of Family Medicine Unit 3 of the Instituto Mexicano del Seguro Social in Guadalajara, Jalisco. The main measures were average age-at-death and educational level. We used Student's t, chi-squared test and relative risk (RR) calculations for statistical analysis. The average age-at-death for those who had a low educational level (n = 1936) was 73.24 ± 12.18 years, while for those who had a satisfactory level of education (n = 370) was 63.47 ± 14.51 years, estimating a mean difference of 9.77 years with p < 0.001. Having a low educational level and not reaching life expectancy compared to the satisfactory level meant a RR = 0.24 (IC 95 % = 0.19, 0.30). The projected linear regression for each educational grade showed that patients lost 2.5 years of life. Diabetes accompanied by a low educational level showed a double probability of not reaching the expectation of life.

36 CFR 51.46 - May the Director determine that a concessioner has not operated satisfactorily after a prospectus...

Code of Federal Regulations, 2010 CFR

2010-07-01

... of an annual evaluation of a concessioner's performance may not occur until after the selection of the best proposal submitted in response to a prospectus, the Director will make an annual performance... performance evaluation. In the event the concessioner receives a second less than satisfactory annual...

Correlations among Jamaican 12th-Graders' Five Variables and Performance in Genetics

ERIC Educational Resources Information Center

Bloomfield, Deen-Paul; Soyibo, Kola

2008-01-01

This study was aimed at finding out if the level of performance of selected Jamaican Grade 12 students on an achievement test on the concept of genetics was satisfactory; if there were statistically significant differences in their performance on the concept linked to their gender, self-esteem, cognitive abilities in biology, school-type and…

Hydrological and water quality processes simulation by the integrated MOHID model

NASA Astrophysics Data System (ADS)

Epelde, Ane; Antiguedad, Iñaki; Brito, David; Eduardo, Jauch; Neves, Ramiro; Sauvage, Sabine; Sánchez-Pérez, José Miguel

2016-04-01

Different modelling approaches have been used in recent decades to study the water quality degradation caused by non-point source pollution. In this study, the MOHID fully distributed and physics-based model has been employed to simulate hydrological processes and nitrogen dynamics in a nitrate vulnerable zone: the Alegria River watershed (Basque Country, Northern Spain). The results of this study indicate that the MOHID code is suitable for hydrological processes simulation at the watershed scale, as the model shows satisfactory performance at simulating the discharge (with NSE: 0.74 and 0.76 during calibration and validation periods, respectively). The agronomical component of the code, allowed the simulation of agricultural practices, which lead to adequate crop yield simulation in the model. Furthermore, the nitrogen exportation also shows satisfactory performance (with NSE: 0.64 and 0.69 during calibration and validation periods, respectively). While the lack of field measurements do not allow to evaluate the nutrient cycling processes in depth, it has been observed that the MOHID model simulates the annual denitrification according to general ranges established for agricultural watersheds (in this study, 9 kg N ha-1 year-1). In addition, the model has simulated coherently the spatial distribution of the denitrification process, which is directly linked to the simulated hydrological conditions. Thus, the model has localized the highest rates nearby the discharge zone of the aquifer and also where the aquifer thickness is low. These results evidence the strength of this model to simulate watershed scale hydrological processes as well as the crop production and the agricultural activity derived water quality degradation (considering both nutrient exportation and nutrient cycling processes).

Field assessment of balance in 10 to 14 year old children, reproducibility and validity of the Nintendo Wii board.

PubMed

Larsen, Lisbeth Runge; Jørgensen, Martin Grønbech; Junge, Tina; Juul-Kristensen, Birgit; Wedderkopp, Niels

2014-06-10

Because body proportions in childhood are different to those in adulthood, children have a relatively higher centre of mass location. This biomechanical difference and the fact that children's movements have not yet fully matured result in different sway performances in children and adults. When assessing static balance, it is essential to use objective, sensitive tools, and these types of measurement have previously been performed in laboratory settings. However, the emergence of technologies like the Nintendo Wii Board (NWB) might allow balance assessment in field settings. As the NWB has only been validated and tested for reproducibility in adults, the purpose of this study was to examine reproducibility and validity of the NWB in a field setting, in a population of children. Fifty-four 10-14 year-olds from the CHAMPS-Study DK performed four different balance tests: bilateral stance with eyes open (1), unilateral stance on dominant (2) and non-dominant leg (3) with eyes open, and bilateral stance with eyes closed (4). Three rounds of the four tests were completed with the NWB and with a force platform (AMTI). To assess reproducibility, an intra-day test-retest design was applied with a two-hour break between sessions. Bland-Altman plots supplemented by Minimum Detectable Change (MDC) and concordance correlation coefficient (CCC) demonstrated satisfactory reproducibility for the NWB and the AMTI (MDC: 26.3-28.2%, CCC: 0.76-0.86) using Centre Of Pressure path Length as measurement parameter. Bland-Altman plots demonstrated satisfactory concurrent validity between the NWB and the AMTI, supplemented by satisfactory CCC in all tests (CCC: 0.74-0.87). The ranges of the limits of agreement in the validity study were comparable to the limits of agreement of the reproducibility study. Both NWB and AMTI have satisfactory reproducibility for testing static balance in a population of children. Concurrent validity of NWB compared with AMTI was satisfactory. Furthermore, the results from the concurrent validity study were comparable to the reproducibility results of the NWB and the AMTI. Thus, NWB has the potential to replace the AMTI in field settings in studies including children. Future studies are needed to examine intra-subject variability and to test the predictive validity of NWB.

Field assessment of balance in 10 to 14 year old children, reproducibility and validity of the Nintendo Wii board

PubMed Central

2014-01-01

Background Because body proportions in childhood are different to those in adulthood, children have a relatively higher centre of mass location. This biomechanical difference and the fact that children’s movements have not yet fully matured result in different sway performances in children and adults. When assessing static balance, it is essential to use objective, sensitive tools, and these types of measurement have previously been performed in laboratory settings. However, the emergence of technologies like the Nintendo Wii Board (NWB) might allow balance assessment in field settings. As the NWB has only been validated and tested for reproducibility in adults, the purpose of this study was to examine reproducibility and validity of the NWB in a field setting, in a population of children. Methods Fifty-four 10–14 year-olds from the CHAMPS-Study DK performed four different balance tests: bilateral stance with eyes open (1), unilateral stance on dominant (2) and non-dominant leg (3) with eyes open, and bilateral stance with eyes closed (4). Three rounds of the four tests were completed with the NWB and with a force platform (AMTI). To assess reproducibility, an intra-day test-retest design was applied with a two-hour break between sessions. Results Bland-Altman plots supplemented by Minimum Detectable Change (MDC) and concordance correlation coefficient (CCC) demonstrated satisfactory reproducibility for the NWB and the AMTI (MDC: 26.3-28.2%, CCC: 0.76-0.86) using Centre Of Pressure path Length as measurement parameter. Bland-Altman plots demonstrated satisfactory concurrent validity between the NWB and the AMTI, supplemented by satisfactory CCC in all tests (CCC: 0.74-0.87). The ranges of the limits of agreement in the validity study were comparable to the limits of agreement of the reproducibility study. Conclusion Both NWB and AMTI have satisfactory reproducibility for testing static balance in a population of children. Concurrent validity of NWB compared with AMTI was satisfactory. Furthermore, the results from the concurrent validity study were comparable to the reproducibility results of the NWB and the AMTI. Thus, NWB has the potential to replace the AMTI in field settings in studies including children. Future studies are needed to examine intra-subject variability and to test the predictive validity of NWB. PMID:24913461

Do instability markers predict satisfactory reduction and requirement for later surgery in emergency department patients with wrist fracture?

PubMed

Winayak, Amar; Gossat, Alyza; Cooper, Jenny; Ritchie, Peter; Lim, Wei; Klim, Sharon; Kelly, Anne-Maree

2018-02-01

Research suggests that the presence of instability markers in patients with displaced distal radial fractures is associated with poorer outcome. Our aims were to determine whether the presence of previously defined instability markers could predict the likelihood of successful ED reduction and requirement for a secondary procedure after ED reduction. Retrospective cohort study performed by medical record review. Adult ED patients coded as having an isolated wrist fracture and having fracture reduction in ED were eligible for inclusion. Data collected included demographics, history of osteoporosis, mechanism of injury, radiological features on X-rays and performance of a secondary procedure. Outcomes of interest were the rate of successful fracture reduction in ED (against defined radiological criteria), the rate of secondary procedures and the association between the number of defined instability risk factors and successful reduction and performance of a secondary surgical procedure. Analysis was by χ 2 test, receiver operating characteristic curve, logistic regression analyses. Three hundred and nineteen patients were studied; median age 62 years, 77% female. Sixty-five per cent of patients had satisfactory fracture reduction in ED (95% CI 59%-70%). Eighty-six patients underwent a secondary procedure to reduce/stabilise their fracture (28%, 95% CI 23%-33%). Younger age, lack of satisfactory ED reduction and increased number of instability factors were independently predictive of the performance of a secondary procedure. Instability risk factors are common in patients with wrist fractures requiring reduction in ED. The number of instability factors is not a strong predictor of the performance of secondary procedures. © 2017 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

42 CFR 456.655 - Validation of showings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Administrator will not find an agency's showing satisfactory if the information obtained through his validation... 42 Public Health 4 2010-10-01 2010-10-01 false Validation of showings. 456.655 Section 456.655... Showing of an Effective Institutional Utilization Control Program § 456.655 Validation of showings. (a...

The O'Connor cinch revisited.

PubMed Central

Williams, A. T.; Metz, H. S.; Jampolsky, A.

1978-01-01

The modified O'Connor cinch operation is a useful, but little used, adjustable resection operation. For increased understanding of its shortening and adjustment characteristics, a standard cinch was performed in animals and patients with strabismus. Animal studies showed that, as each strand of the cinch was removed, a small, relatively equal release of the cinch effect occurred. Measurement of the shortening obtained in patients with strabismus showed a consistent resection effect of about 4 mm. Review of 17 cases in which the cinch was used as part of the surgical treatment showed the technique to be adjustable by reducing the overcorrection in 6 cases. Ten to 20 prism dioptres of reduction in the deviation was obtained with adjustment of the cinch on the first postoperative day. All 17 cases had satisfactory adjustment. The largest residual deviation was 12 prism dioptres. Images PMID:718816

STOL ride control feasibility study

NASA Technical Reports Server (NTRS)

Gordon, C. K.; Dodson, R. O.

1973-01-01

The feasibility of developing a ride-smoothing control system for a 20-passenger turboprop STOL transport was assessed. Five different ride-control system configurations with varying degrees of complexity, performance, and cost were investigated. Results indicate that a satisfactory ride-control system can be practically implemented on the aircraft with minimum flight performance degradation.

Development and validity of a scale to measure workplace culture of health.

PubMed

Kwon, Youngbum; Marzec, Mary L; Edington, Dee W

2015-05-01

To describe the development of and test the validity and reliability of the Workplace Culture of Health (COH) scale. Exploratory factor analysis and confirmatory factor analysis were performed on data from a health care organization (N = 627). To verify the factor structure, confirmatory factor analysis was performed on a second data set from a medical equipment manufacturer (N = 226). The COH scale included a structure of five orthogonal factors: senior leadership and polices, programs and rewards, quality assurance, supervisor support, and coworker support. With regard to construct validity (convergent and discriminant) and reliability, two different US companies showed the same factorial structure, satisfactory fit statistics, and suitable internal and external consistency. The COH scale represents a reliable and valid scale to assess the workplace environment and culture for supporting health.

Training Feedforward Neural Networks Using Symbiotic Organisms Search Algorithm.

PubMed

Wu, Haizhou; Zhou, Yongquan; Luo, Qifang; Basset, Mohamed Abdel

2016-01-01

Symbiotic organisms search (SOS) is a new robust and powerful metaheuristic algorithm, which stimulates the symbiotic interaction strategies adopted by organisms to survive and propagate in the ecosystem. In the supervised learning area, it is a challenging task to present a satisfactory and efficient training algorithm for feedforward neural networks (FNNs). In this paper, SOS is employed as a new method for training FNNs. To investigate the performance of the aforementioned method, eight different datasets selected from the UCI machine learning repository are employed for experiment and the results are compared among seven metaheuristic algorithms. The results show that SOS performs better than other algorithms for training FNNs in terms of converging speed. It is also proven that an FNN trained by the method of SOS has better accuracy than most algorithms compared.

Neural self-tuning adaptive control of non-minimum phase system

NASA Technical Reports Server (NTRS)

Ho, Long T.; Bialasiewicz, Jan T.; Ho, Hai T.

1993-01-01

The motivation of this research came about when a neural network direct adaptive control scheme was applied to control the tip position of a flexible robotic arm. Satisfactory control performance was not attainable due to the inherent non-minimum phase characteristics of the flexible robotic arm tip. Most of the existing neural network control algorithms are based on the direct method and exhibit very high sensitivity, if not unstable, closed-loop behavior. Therefore, a neural self-tuning control (NSTC) algorithm is developed and applied to this problem and showed promising results. Simulation results of the NSTC scheme and the conventional self-tuning (STR) control scheme are used to examine performance factors such as control tracking mean square error, estimation mean square error, transient response, and steady state response.

Measuring implementation intentions in the context of the theory of planned behavior.

PubMed

Rise, Jostein; Thompson, Marianne; Verplanken, Bas

2003-04-01

The usefulness of measuring implementation intentions in the context of the theory of planned behavior (TPB) was explored among 112 Norwegian college students. They responded to a questionnaire measuring past behavior, perceived behavioral control, behavioral intentions, implementation intentions, and actual performance of regular exercising and recycling of drinking cartons. Implementation intentions were measured using five items relating to recycling and four items relating to exercise, which showed satisfactory internal consistencies. Consistent with the main prediction, the presence of implementation intentions was related to performing the two behaviors, although behavioral intentions were the strongest determinant for both behaviors. The results suggest that the TPB may benefit from inclusion of the concept of implementation intentions to provide a more complete understanding of the psychological process in which motivation is translated into action.

Reports of "satisfactory relief" by IBS patients receiving usual medical care are confounded by baseline symptom severity and do not accurately reflect symptom improvement.

PubMed

Whitehead, William E; Palsson, Olafur S; Levy, Rona L; Feld, Andrew D; VonKorff, Michael; Turner, Marsha

2006-05-01

Treatment trials for irritable bowel syndrome (IBS) usually define a responder as a patient who reports satisfactory relief or adequate relief of symptoms at the end of the trial. However, these measures have not been adequately validated. (1) Compare a binary satisfactory relief measure to alternative ways of defining a treatment responder. (2) Determine whether baseline IBS symptom severity or psychological distress influence the sensitivity of these outcome measures. A total of 350 patients (81% females, average age 50 yr) who had a medical diagnosis of IBS and satisfied Rome II criteria, were recruited from Group Health Cooperative of Puget Sound. At baseline the Irritable Bowel Severity Scale (IBSS) was used to assess symptom severity and to classify patients as mild, moderate, or severe. Psychological distress and IBS-specific quality of life (IBS-QOL) were also assessed. After 6 months treatment with standard medical care, IBSS and IBS-QOL were reassessed, and patients were asked whether they had experienced satisfactory relief and whether they were somewhat or markedly better. Initial severity of IBS significantly affected the proportion who reported satisfactory relief (mild, 72%; moderate, 53%; severe, 44%) and the proportion who were somewhat or markedly better (mild, 62%; moderate, 44%; severe, 38%), but did not affect the proportion with a 50% reduction in symptoms (mild, 26%; moderate, 25%; severe, 23%). Although mild patients were the most likely to report satisfactory relief, they showed no average decrease in symptom severity or improvement in IBS-QOL. Conversely, severe patients, who were the least likely to report satisfactory relief, had the largest reductions in IBS symptom severity and the largest improvements in IBS-QOL. Psychological distress had no significant effect on the responder rate after adjusting for IBS symptom severity. These data from a descriptive study suggest that satisfactory relief is confounded with initial IBS symptom severity and is poorly correlated with the amount of symptom improvement. Confirmation of these findings in a clinical trial is needed.

Utilizing In Situ Directional Hyperspectral Measurements to Validate Bio-Indicator Simulations for a Corn Crop Canopy

NASA Technical Reports Server (NTRS)

Cheng, Yen-Ben; Middleton, Elizabeth M.; Huemmrich, Karl F.; Zhang, Qingyuan; Campbell, Petya K. E.; Corp, Lawrence A.; Russ, Andrew L.; Kustas, William P.

2010-01-01

Two radiative transfer canopy models, SAIL and the two-layer Markov-Chain Canopy Reflectance Model (MCRM), were coupled with in situ leaf optical properties to simulate canopy-level spectral band ratio vegetation indices with the focus on the photochemical reflectance index in a cornfield. In situ hyperspectral measurements were made at both leaf and canopy levels. Leaf optical properties were obtained from both sunlit and shaded leaves. Canopy reflectance was acquired for eight different relative azimuth angles (psi) at three different view zenith angles (Theta (sub v)), and later used to validate model outputs. Field observations of photochemical reflectance index (PRI) for sunlit leaves exhibited lower values than shaded leaves, indicating higher light stress. Canopy PRI expressed obvious sensitivity to viewing geometry, as a function of both Theta (sub v) and psi . Overall, simulations from MCRM exhibited better agreements with in situ values than SAIL. When using only sunlit leaves as input, the MCRM-simulated PRI values showed satisfactory correlation and RMSE, as compared to in situ values. However, the performance of the MCRM model was significantly improved after defining a lower canopy layer comprised of shaded leaves beneath the upper sunlit leaf layer. Four other widely used band ratio vegetation indices were also studied and compared with the PRI results. MCRM simulations were able to generate satisfactory simulations for these other four indices when using only sunlit leaves as input; but unlike PRI, adding shaded leaves did not improve the performance of MCRM. These results support the hypothesis that the PRI is sensitive to physiological dynamics while the others detect static factors related to canopy structure. Sensitivity analysis was performed on MCRM in order to better understand the effects of structure related parameters on the PRI simulations. Leaf area index (LAI) showed the most significant impact on MCRM-simulated PRI among the parameters studied. This research shows the importance of hyperspectral and narrow band sensor studies, and especially the necessity of including the green wavelengths (e.g., 531 nm) on satellites proposing to monitor carbon dynamics of terrestrial ecosystems.

The components of shoulder and elbow movements as goals of primary reconstructive operation in obstetric brachial plexus lesions.

PubMed

Luszawski, Jerzy; Marcol, Wiesław; Mandera, Marek

Most of the cases of obstetric brachial plexus lesions (OBPL) show satisfactory improvement with conservative management, but in about 25% some surgical treatment is indicated. The present paper analyzes the effects of primary reconstructive surgeries in aspect of achieving delineated intraoperatively goals. Children operated before the age of 18 months with follow-up period longer than 1 year were selected. Therapeutic goals established during the operation were identified by analysis of initial clinical status and operative protocols. The elementary movement components in shoulder and elbow joints were classified by assessing range of motion, score in Active Movement Scale and modified British Medical Research Council scale of muscle strength. The effect was considered satisfactory when some antigravity movement was possible, and good when strength exceeded M3 or antigravity movement exceeded half of range of passive movement. In 13 of 19 patients most of established goals were achieved at good level, in 2 at satisfactory level. Remaining 4 patients showed improvement only in some aspects of extremity function. In 2 patients improvement in some movements was accompanied by worsening of other movements. The analysis of results separated into individual components of movements showed that goals were achieved in most of the cases, simultaneously clearly indicating which damaged structures failed to provide satisfactory function despite being addressed intraoperatively. The good results were obtained mainly by regeneration through grafts implanted after resection of neuroma in continuity, which proves that this technique is safe in spite of unavoidable temporary regression of function postoperatively. Copyright © 2017 Polish Neurological Society. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

34 CFR 361.89 - Enforcement procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Standards and Performance Indicators § 361.89 Enforcement procedures. (a) If a DSU fails to meet the... satisfactory level on the compliance indicators. (Approved by the Office of Management and Budget under control...

Italian version of the organic brain syndrome and the depression scales from the CARE: evaluation of their performance in geriatric institutions.

PubMed

Spagnoli, A; Foresti, G; MacDonald, A; Williams, P

1987-05-01

The Organic Brain Syndrome (OBS) and the Depression (D) scales derived from the Comprehensive Assessment and Referral Evaluation (CARE) were translated into Italian and used in a survey of geriatric institutions in Milan. During the survey validity and reliability tests of the scales were conducted. Inter-rater reliability (total score weighted kappa) was highly satisfactory for both scales (0.96 for OBS and 0.83 for D scale). Reliability was assessed three times during the survey and showed good stability for both scales, with a slight but significant trend towards reduction over time for the D scale. Reliability of the D scale was significantly lower when the subjects interviewed scored highly on the OBS scale (severe cognitive impairment). Criterion validity was highly satisfactory both for the OBS scale (cut-off point 4/5: sensitivity 77%, specificity 96%, positive predictive value 91%) and the D scale (cut-off point 10/11: sensitivity 95%, specificity 92%, positive predictive value 84%). Results are discussed with special reference to longitudinal assessment of reliability, the choice of the cut-off point, and the context-dependent properties of questionnaires.

Grandmother's support for new mothers in Japan.

PubMed

Matsui, Rie; Sato, Yumi

2018-05-17

This study was designed to describe grandmothers' intentions regarding providing satisfactory infant care support for new mothers. Qualitative inductive analysis was performed using semistructured interviews conducted with 19 pairs of grandmothers and new mothers with one child aged 3-4 months old. Support that satisfied the new mothers was categorized into five concepts, which included support activities such as "minding the grandchild" and "supporting family life". Six reasons were attributed by the new mothers for their satisfaction such as "reduced anxiety toward infant care" and "lifestyle stability including infant care". The grandmothers' intentions in providing satisfactory infant care support for new mothers were categorized into seven concepts that included "sympathizing with the hardships of motherhood upon seeing the mother's situation" and "balancing the desire to provide support and maintain their own lifestyle". Grandmothers wanted to help new mothers by supporting and empowering them. Data also showed that grandmothers could potentially benefit from research-based information on modern infant care practices as well as reliable and up-to-date infant care information obtained from within the community. Supporting grandmothers in their role will ultimately benefit infants and new mothers and contribute to grandmothers' personal fulfillment. © 2018 Wiley Periodicals, Inc.

Array Automated Assembly Task for the Low Cost Solar Array Project, Phase 2

NASA Technical Reports Server (NTRS)

Campbell, R. B.; Rai-Choudhury, P.; Seman, E. J.; Rohatgi, A.; Davis, J. R.; Ostroski, J.; Stapleton, R. W.

1979-01-01

Using silk screened evaporated and sputtered Al as the metal source, the formation of Al back surface fields was studied. The most satisfactory results were those obtained with the sputtered A1 and in which open circuit voltages (V sub oc) of 0.585 v (12 ohm cm FZ silicon) were achieved. The ultrasonic interconnect process is discussed. The process is shown to be satisfactory, but increased pull-strength may be obtained if some form of sintering is carried out on the metallized contacts. Plasma etching is shown to be feasible as a replacement for wet chemical cleaning prior to diffusion. Initial results on cells prepared by using electroless Pd/Ni plus either electroplated Ag or Cu show slightly poor performance than cells with the baseline evaporated Ti/Pd/Ag system. A mask designed for the 1.6 x 7.0 cm and 2.0 x 7.0 cm cells is described. This mask has a lower area coverage and total lower resistive loss than the previous mask design. It is also shown that the cell width should not exceed 2.0 - 3.0 cm for optimum efficiency.

Performance comparison for Barnes model 12-1000, Exotech model 100, and Ideas Inc. Biometer Mark 2

NASA Technical Reports Server (NTRS)

Robinson, B. (Principal Investigator)

1981-01-01

Results of tests show that all channels of all instruments, except channel 3 of the Biometer Mark 2, were stable in response to input signals were linear, and were adequately stable in response to temperature changes. The Biometer Mark 2 is labelled with an inappropriate description of the units measured and the dynamic range is a inappropriate for field measurements causing unnecessarily high fractional errors. This instrument is, therefore, quantization limited. The dynamic range and noise performance of the Model 12-1000 are appropriate for remote sensing field research. The field of view and performance of the Model 100A and the Model 12-1000 are satisfactory. The Biometer Mark 2 has not, as yet, been satisfactorily equipped with an acceptable field of view determining device. Neither the widely used aperture plate nor the 24 deg cone are acceptable.

Constructing experimental devices for half-ton synthesis of gadolinium-loaded liquid scintillator and its performance.

PubMed

Park, Young Seo; Jang, Yeong Min; Joo, Kyung Kwang

2018-04-01

This paper describes in brief features of various experimental devices constructed for half-ton synthesis of gadolinium(Gd)-loaded liquid scintillator (GdLS) and also includes the performances and detailed chemical and physical results of a 0.5% high-concentration GdLS. Various feasibility studies on useful apparatus used for loading Gd into solvents have been carried out. The transmittance, Gd concentration, density, light yield, and moisture content were measured for quality control. We show that with the help of adequate automated experimental devices and tools, it is possible to perform ton scale synthesis of GdLS at moderate laboratory scale without difficulty. The synthesized GdLS was satisfactory to meet chemical, optical, and physical properties and various safety requirements. These synthesizing devices can be expanded into massive scale next-generation neutrino experiments of several hundred tons.

An experience of the Snow-Littler procedure.

PubMed

Rider, M A; Grindel, S I; Tonkin, M A; Wood, V E

2000-08-01

This paper reviews the results of the Snow-Littler procedure performed in twelve hands with classical central longitudinal deficiency and in one hand with symbrachydactyly, cleft type. There were no instances of major flap necrosis although two flaps showed tip ischaemia. The width of the first web was, in the main, satisfactory but four webspace revisions were performed. Supplementary skin grafting at the time of surgery was necessary in complete and/or complex thumb index syndactylies and in the patient with symbrachydactyly. In eight cases, a transverse metacarpal ligament was reconstructed. In the five other cases, no clinical instability or radiological divergence of the index and ring fingers occurred, in spite of no transverse metacarpal ligament reconstruction. Three de-rotational osteotomies of transposed index fingers were performed in patients who had a transverse metacarpal ligament reconstruction. These results indicated significantly improved appearance and improved function following the Snow-Littler procedure.

Constructing experimental devices for half-ton synthesis of gadolinium-loaded liquid scintillator and its performance

NASA Astrophysics Data System (ADS)

Park, Young Seo; Jang, Yeong Min; Joo, Kyung Kwang

2018-04-01

This paper describes in brief features of various experimental devices constructed for half-ton synthesis of gadolinium(Gd)-loaded liquid scintillator (GdLS) and also includes the performances and detailed chemical and physical results of a 0.5% high-concentration GdLS. Various feasibility studies on useful apparatus used for loading Gd into solvents have been carried out. The transmittance, Gd concentration, density, light yield, and moisture content were measured for quality control. We show that with the help of adequate automated experimental devices and tools, it is possible to perform ton scale synthesis of GdLS at moderate laboratory scale without difficulty. The synthesized GdLS was satisfactory to meet chemical, optical, and physical properties and various safety requirements. These synthesizing devices can be expanded into massive scale next-generation neutrino experiments of several hundred tons.

Children's perception of their synthetically corrected speech production.

PubMed

Strömbergsson, Sofia; Wengelin, Asa; House, David

2014-06-01

We explore children's perception of their own speech - in its online form, in its recorded form, and in synthetically modified forms. Children with phonological disorder (PD) and children with typical speech and language development (TD) performed tasks of evaluating accuracy of the different types of speech stimuli, either immediately after having produced the utterance or after a delay. In addition, they performed a task designed to assess their ability to detect synthetic modification. Both groups showed high performance in tasks involving evaluation of other children's speech, whereas in tasks of evaluating one's own speech, the children with PD were less accurate than their TD peers. The children with PD were less sensitive to misproductions in immediate conjunction with their production of an utterance, and more accurate after a delay. Within-category modification often passed undetected, indicating a satisfactory quality of the generated speech. Potential clinical benefits of using corrective re-synthesis are discussed.

Correlations among Five Demographic Variables and the Performance of Selected Jamaican 11th-Graders on Some Numerical Problems on Energy

ERIC Educational Resources Information Center

Emepue, Nicholas; Soyibo, Kola

2009-01-01

This study was designed to assess whether the level of performance of selected Jamaican 11th-grade physics students on some numerical problems on the energy concept was satisfactory and if there were significant differences in their performance linked to their gender, socioeconomic background (SEB), school location, English language and…

Removal of Cr(VI) from Water Using a New Reactive Material: Magnesium Oxide Supported Nanoscale Zero-Valent Iron

PubMed Central

Siciliano, Alessio

2016-01-01

The chromium pollution of water is an important environmental and health issue. Cr(VI) removal by means of metallic iron is an attractive method. Specifically, nanoscopic zero valent iron (NZVI) shows great reactivity, however, its applicability needs to be further investigated. In the present paper, NZVI was supported on MgO grains to facilitate the treatments for remediation of chromium-contaminated waters. The performances and mechanisms of the developed composite, in the removal of hexavalent chromium, were investigated by means of batch and continuous tests. Kinetic studies, under different operating conditions, showed that reduction of Cr(VI) could be expressed by a pseudo second-order reaction kinetic. The reaction rate increased with the square of Fe(0) amount, while it was inversely proportional to the initial chromium concentration. The process performance was satisfactory also under uncontrolled pH, and a limited influence of temperature was observed. The reactive material was efficiently reusable for many cycles without any regeneration treatment. The performances in continuous tests were close to 97% for about 80 pore volume of reactive material. PMID:28773785

Removal of Cr(VI) from Water Using a New Reactive Material: Magnesium Oxide Supported Nanoscale Zero-Valent Iron.

PubMed

Siciliano, Alessio

2016-08-06

The chromium pollution of water is an important environmental and health issue. Cr(VI) removal by means of metallic iron is an attractive method. Specifically, nanoscopic zero valent iron (NZVI) shows great reactivity, however, its applicability needs to be further investigated. In the present paper, NZVI was supported on MgO grains to facilitate the treatments for remediation of chromium-contaminated waters. The performances and mechanisms of the developed composite, in the removal of hexavalent chromium, were investigated by means of batch and continuous tests. Kinetic studies, under different operating conditions, showed that reduction of Cr(VI) could be expressed by a pseudo second-order reaction kinetic. The reaction rate increased with the square of Fe(0) amount, while it was inversely proportional to the initial chromium concentration. The process performance was satisfactory also under uncontrolled pH, and a limited influence of temperature was observed. The reactive material was efficiently reusable for many cycles without any regeneration treatment. The performances in continuous tests were close to 97% for about 80 pore volume of reactive material.

76 FR 5431 - Publication of FY 2010 Service Contract Inventory

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-31

... available to the public at http://www.treasury.gov/about/organizational-structure/offices/Pages/Office-of... employees and contractors in the Department is effectively balanced, if contract performance is satisfactory...

24 CFR 570.411 - Joint Community Development Program.

Code of Federal Regulations, 2011 CFR

2011-04-01

... legislative body of each such unit of general local government. (h) NOFA contents. The NOFA will describe any... activities in a timely fashion, including satisfactory performance in carrying out any previous HUD-assisted...

46 CFR 160.037-3 - Materials, workmanship, construction, and performance requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... preclude variations of density which may adversely affect uniformity of its smoke emitting characteristics... the signal plus packaging in a sealed plastic waterproof bag satisfactory to the Commandant. (d...

MindDigger: Feature Identification and Opinion Association for Chinese Movie Reviews

NASA Astrophysics Data System (ADS)

Zhao, Lili; Li, Chunping

In this paper, we present a prototype system called MindDigger, which can be used to analyze the opinions in Chinese movie reviews. Different from previous research that employed techniques on product reviews, we focus on Chinese movie reviews, in which opinions are expressed in subtle and varied ways. The system designed in this work aims to extract the opinion expressions and assign them to the corresponding features. The core tasks include feature and opinion extraction, and feature-opinion association. To deal with Chinese effectively, several novel approaches based on syntactic analysis are proposed in this paper. Running results show the performance is satisfactory.

Evaluation of areas prepared for planting using LANDSAT data. M.S. Thesis; [Ribeirao Preto, Brazil

NASA Technical Reports Server (NTRS)

Parada, N. D. J. (Principal Investigator); Deassuncao, G. V.; Duarte, V.

1983-01-01

Three different algorithms (SINGLE-CELL, MAXVER and MEDIA K) were used to automatically interpret data from LANDSAT observations of an area of Ribeirao Preto, Brazil. Photographic transparencies were obtained, projected and visually interpreted. The results show that: (1) the MAXVER algorithm presented a better classification performance; (2) verification of the changes in cultivated areas using data from the three different acquisition dates was possible; (3) the water bodies, degraded lands, urban areas, and fallow fields were frequently mistaken by cultivated soils; and (4) the use of projected photographic transparencies furnished satisfactory results, besides reducing the time spent on the image-100 system.

Synthesis, biological activity and dyeing performance of some novel azo disperse dyes incorporating pyrazolo[1,5-a]pyrimidines for dyeing of polyester fabrics

NASA Astrophysics Data System (ADS)

Sayed, Ahmed Z.; Aboul-Fetouh, Mahmoud S.; Nassar, Hesham S.

2012-02-01

Several novel pyrazolopyrimidine azo compounds were achieved from diazotization of 4-aminoacetanilide and coupling with malononitrile and then refluxed with hydrazine hydrate to furnish 3,5-diamino-4-(4-acetamidophenylazo)-1H-pyrazole. The later compound was diazotized and coupled with substituted α-cyanocinnamate, α-cyanocinnamonitrile, 2-cyano-3-ethoxyacrylic acid ethyl ester, chalcones and ethylacetoacetate to produce novel dyestuffs. Structures of the dyes were fully characterized by using FT-IR, 1H NMR, mass spectroscopy and elemental analysis. The dyes were applied to polyester fiber, affording satisfactory results and showed biological activity towards various microorganisms.

Decomposition of ECG by linear filtering.

PubMed

Murthy, I S; Niranjan, U C

1992-01-01

A simple method is developed for the delineation of a given electrocardiogram (ECG) signal into its component waves. The properties of discrete cosine transform (DCT) are exploited for the purpose. The transformed signal is convolved with appropriate filters and the component waves are obtained by computing the inverse transform (IDCT) of the filtered signals. The filters are derived from the time signal itself. Analysis of continuous strips of ECG signals with various arrhythmias showed that the performance of the method is satisfactory both qualitatively and quantitatively. The small amplitude P wave usually had a high percentage rms difference (PRD) compared to the other large component waves.

Immediate esthetic crown with a facet of the extracted element

PubMed Central

Di Giacomo, Giovanni de Almeida Prado; Magalhães, Amanda; Ajzen, Sergio

2014-01-01

The present report describes a case of implant loading with an immediate temporary crown. The buccal crown surface was removed from the extracted tooth to obtain an aesthetically satisfactory result. After periodontal treatment, tooth 21 appeared proclined and showed Grade 3 mobility, indicating the need for its extraction. The remaining bone was imaged using computed tomography, and virtual surgical planning was performed using these results. The implant was immediately loaded postextraction into the fresh alveolus without a graft and flap procedure. The temporary tooth, which was manufactured using the extracted buccal surface, was a simple, fast, and low cost procedure that produced an excellent esthetic outcome. PMID:25202225

Expanded and independent validation of the Movement Disorder Society-Unified Parkinson's Disease Rating Scale (MDS-UPDRS).

PubMed

Martinez-Martin, Pablo; Rodriguez-Blazquez, Carmen; Alvarez-Sanchez, Mario; Arakaki, Tomoko; Bergareche-Yarza, Alberto; Chade, Anabel; Garretto, Nelida; Gershanik, Oscar; Kurtis, Monica M; Martinez-Castrillo, Juan Carlos; Mendoza-Rodriguez, Amelia; Moore, Henry P; Rodriguez-Violante, Mayela; Singer, Carlos; Tilley, Barbara C; Huang, Jing; Stebbins, Glenn T; Goetz, Christopher G

2013-01-01

The Movement Disorder Society-UPDRS (MDS-UPDRS) was published in 2008, showing satisfactory clinimetric results and has been proposed as the official benchmark scale for Parkinson's disease. The present study, based on the official MDS-UPDRS Spanish version, performed the first independent testing of the scale and adds information on its clinimetric properties. The cross-culturally adapted MDS-UPDRS Spanish version showed a comparative fit index ≥ 0.90 for each part (I-IV) relative to the English-language version and was accepted as the Official MDS-UPDRS Spanish version. Data from this scale, applied with other assessments to Spanish-speaking Parkinson's disease patients in five countries, were analyzed for an independent and complementary clinimetric evaluation. In total, 435 patients were included. Missing data were negligible and moderate floor effect (30 %) was found for Part IV. Cronbach's α index ranged between 0.79 and 0.93 and only five items did not reach the 0.30 threshold value of item-total correlation. Test-retest reliability was adequate with only two sub-scores of the item 3.17, Rest tremor amplitude, reaching κ values lower than 0.60. The intraclass correlation coefficient was higher than 0.85 for the total score of each part. Correlation of the MDS-UPDRS parts with other measures for related constructs was high (≥ 0.60) and the standard error of measurement lower than one-third baseline standard deviation for all subscales. Results confirm those of the original study and add information on scale reliability, construct validity, and precision. The MDS-UPDRS Spanish version shows satisfactory clinimetric characteristics.

Machine learning based cloud mask algorithm driven by radiative transfer modeling

NASA Astrophysics Data System (ADS)

Chen, N.; Li, W.; Tanikawa, T.; Hori, M.; Shimada, R.; Stamnes, K. H.

2017-12-01

Cloud detection is a critically important first step required to derive many satellite data products. Traditional threshold based cloud mask algorithms require a complicated design process and fine tuning for each sensor, and have difficulty over snow/ice covered areas. With the advance of computational power and machine learning techniques, we have developed a new algorithm based on a neural network classifier driven by extensive radiative transfer modeling. Statistical validation results obtained by using collocated CALIOP and MODIS data show that its performance is consistent over different ecosystems and significantly better than the MODIS Cloud Mask (MOD35 C6) during the winter seasons over mid-latitude snow covered areas. Simulations using a reduced number of satellite channels also show satisfactory results, indicating its flexibility to be configured for different sensors.

Use of a Palmaz stent for tracheomalacia: case report of an infant with esophageal atresia.

PubMed

Tazuke, Y; Kawahara, H; Yagi, M; Yoneda, A; Soh, H; Maeda, K; Yamamoto, T; Imura, K

1999-08-01

A male infant with congenital cardiac anomalies and esophageal atresia with tracheoesophageal fistula (EA-TEF) showed intractable respiratory symptoms after delayed primary repair of EA-TEF. Computed tomography demonstrated that the trachea was compressed by the enlarged aorta. Artificial ventilation was necessary even after aortopexy performed at 2 months of age. At 140 days of age, an expandable metallic stent (Palmaz stent) was inserted through a rigid bronchoscope into the trachea underfluoroscopic control. His respiratory status improved dramatically, and he was extubated in 18 hours. Although the follow-up period has been 9 months, the short-term result is satisfactory. The expandable metallic stent placement should be considered in patients with EA-TEF who show intractable respiratory symptoms caused by tracheomalacia.

[ASSOCIATION BETWEEN FITNESS, NUTRITIONAL STATUS AND ACADEMIC PERFORMANCE IN PHYSICAL EDUCATION STUDENTS].

PubMed

Godoy Cumillaf, Andrés; Valdés Badilla, Pablo; Fariña Herrera, Custodio; Cárcamo Mora, Francisco; Medina Herrera, Bernice; Meneses Sandoval, Elías; Gedda Muñoz, Relmu; Durán Agüero, Samuel

2015-10-01

several studies demonstrated that regular physical exercise would impact positively on the academic performance of students. to determine the association between physical fitness, nutritional status and academic performance of students of Pedagogy in Physical Education from Temuco, Chile. the sample was selected on a non-probabilistic approach, which included 208 subjects (n = 153 women and n = 55 women). The variables studied were physical fitness (short Abs, long jump with feet together, forward trunk flexion, elbow flexion and extension and "course navette" test), nutritional status (BMI) and academic performance (classified as up and down the academic average). 87.5% of students have a satisfactory fitness and a BMI of 23.8 ± 2.9 kg/m2. The students with the best academic performance were those with the higher proportion of satisfactory physical condition (92.5 %). No association between academic performance and nutritional status was determined, but it was observed between low fitness and a great risk of low academic performance (OR = 2.8, 95% CI 1.0 to 8 1; p < 0.05). a relationship between academic achievement and physical fitness among students is observed, but no for the nutritional status and the academic performance. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Self-reported academic performance in relation to health behaviours among Bahria University students.

PubMed

Rehman, Rehana; Zafar, Amara; Mohib, Aleena; Hussain, Mehwish; Ali, Rabiya

2018-02-01

To find an association between self-reported academic performance with different socio-demographic factors, health behaviours and mental health amongst university students. This cross-sectional study was conducted at Bahria University, Karachi, from January 2012 to December 2013, and comprised university students of different disciplines. An anonymous, self-reported questionnaire was distributed among the subjects. Convenient sampling technique was used. Demographic information, including age, gender and field of study, were obtained. Depresion was evaluated via Centre for Epidemiological Studies Depression Scale. SPSS 22 was used to analyse data. Of the 813 respondents, 334(41.1%) were males and 479(58.9%) females. The mean age was 19.9±1.8 years. Overall, 126(15.5%) subjects reported excellent, 242(29.8%) very good, 310(38.1%) good, 100(12.3%) satisfactory and 35(4.3%) not satisfactory academic performance. Residential status of students played a significant role on their academic performance (p=0.011). Breakfast eating behaviour depicted a significant association with the academic performance (p=0.04).The proportion of unsatisfactory academic performances among students having severe sleep disorder was the highest, followed by mild/moderate (p=0.01). The depression scale's item 'troubling in mind' was highly associated with academic performance (p<0.05). A constructive association existed among healthy behaviours and academic performance. .

Review of cell performance in anion exchange membrane fuel cells

NASA Astrophysics Data System (ADS)

Dekel, Dario R.

2018-01-01

Anion exchange membrane fuel cells (AEMFCs) have recently received increasing attention since in principle they allow for the use of non-precious metal catalysts, which dramatically reduces the cost per kilowatt of power in fuel cell devices. Until not long ago, the main barrier in the development of AEMFCs was the availability of highly conductive anion exchange membranes (AEMs); however, improvements on this front in the past decade show that newly developed AEMs have already reached high levels of conductivity, leading to satisfactory cell performance. In recent years, a growing number of research studies have reported AEMFC performance results. In the last three years, new records in performance were achieved. Most of the literature reporting cell performance is based on hydrogen-AEMFCs, although an increasing number of studies have also reported the use of fuels others than hydrogen - such as alcohols, non-alcohol C-based fuels, as well as N-based fuels. This article reviews the cell performance and performance stability achieved in AEMFCs through the years since the first reports in the early 2000s.

Development and Evaluation of Elastomeric Materials for Geothermal Applications

NASA Technical Reports Server (NTRS)

Mueller, W. A.; Kalfayan, S. H.; Reilly, W. W.; Yavrouian, A. H.; Mosesman, I. D.; Ingham, J. D.

1979-01-01

A material was formulated having about 250-350 psi tensile strength and 30-80 percent elongation at 260 C for at least 24 hours in simulated brine. The relationship between these laboratory test results and sealing performance in actual or simulated test conditions is not entirely clear; however, it is believed that no conventional formation or casing packer design is likely to perform well using these materials. The synthetic effort focused on high temperature block copolymers and development of curable polystyrene. Procedures were worked out for synthesizing these new materials. Initial results with heat-cured unfilled polystyrene 'gum' at 260 C indicate a tensile strength of about 50 psi. Cast films of the first sample of polyphenyl quinoxaline-polystyrene block copolymer, which has 'graft-block' structure consisting of a polystyrene chain with pendant polyphenyl quinoxaline groups, show elastomeric behavior in the required temperature range. Its tensile strength and elongation at 260 C were 220-350 psi and 18-36 percent, respectively. All of these materials also showed satisfactory hydrolytic stability.

Course Evaluation in Sweden--When, How, What and Why

ERIC Educational Resources Information Center

Cronholm, Stefan

2010-01-01

This study is about course evaluation in Swedish higher education. Performing course evaluation is regulated in Swedish law. Despite this, only half of the courses are evaluated. The aim of this study is to understand why satisfactory course evaluations not are performed. Problems are identified from a student perspective and the paper provides…

The Academic Progress Rate: Good PR, Bad Policy

ERIC Educational Resources Information Center

Cusack, Michael J.

2007-01-01

This fall the Academic Progress Rate, a formula that the National Collegiate Athletic Association developed to measure the academic performance of its member teams, will go into full effect. Known as the APR, the formula consists of two variables: academic performance (which requires satisfactory grades and timely progress to a degree) and student…

32 CFR 1656.4 - Alternative Service Office: jurisdiction and authority.

Code of Federal Regulations, 2010 CFR

2010-07-01

... for job placement; (5) Monitor the ASW's job performance; (6) Issue a certificate of satisfactory... assigned to perform alternative service. (b) The ASO shall: (1) Evaluate and approve jobs and employers for Alternative Service; (2) Order the ASW to report for alternative service work; (3) Issue such orders as are...

34 CFR 668.34 - Satisfactory academic progress.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 34 Education 3 2013-07-01 2013-07-01 false Satisfactory academic progress. 668.34 Section 668.34... Satisfactory academic progress. (a) Satisfactory academic progress policy. An institution must establish a reasonable satisfactory academic progress policy for determining whether an otherwise eligible student is...

34 CFR 668.34 - Satisfactory academic progress.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 3 2014-07-01 2014-07-01 false Satisfactory academic progress. 668.34 Section 668.34... Satisfactory academic progress. (a) Satisfactory academic progress policy. An institution must establish a reasonable satisfactory academic progress policy for determining whether an otherwise eligible student is...

34 CFR 668.34 - Satisfactory academic progress.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 3 2012-07-01 2012-07-01 false Satisfactory academic progress. 668.34 Section 668.34... Satisfactory academic progress. (a) Satisfactory academic progress policy. An institution must establish a reasonable satisfactory academic progress policy for determining whether an otherwise eligible student is...

34 CFR 668.34 - Satisfactory academic progress.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false Satisfactory academic progress. 668.34 Section 668.34... Satisfactory academic progress. (a) Satisfactory academic progress policy. An institution must establish a reasonable satisfactory academic progress policy for determining whether an otherwise eligible student is...

Integrated chassis control for a three-axle electric bus with distributed driving motors and active rear steering system

NASA Astrophysics Data System (ADS)

Liu, Wei; He, Hongwen; Sun, Fengchun; Lv, Jiangyi

2017-05-01

This paper describes an integrated chassis control framework for a novel three-axle electric bus with active rear steering (ARS) axle and four motors at the middle and rear wheels. The proposed integrated framework consists of four parts: (1) an active speed limiting controller is designed for anti-body slip control and rollover prevention; (2) an ARS controller is designed for coordinating the tyre wear between the driving wheels; (3) an inter-axle torque distribution controller is designed for optimal torque distribution between the axles, considering anti-wheel slip and battery power limitations and (4) a data acquisition and estimation module for collecting the measured and estimated vehicle states. To verify the performances, a simulation platform is established in Trucksim software combined with Simulink. Three test cases are particularly designed to show the performances. The proposed algorithm is compared with a simple even control algorithm. The test results show satisfactory lateral stability and rollover prevention performances under severe steering conditions. The desired tyre wear coordinating performance is also realised, and the wheel slip ratios are restricted within stable region during intensive driving and emergency braking with complicated road conditions.

38 CFR 21.8360 - Satisfactory conduct and cooperation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Satisfactory conduct and... Children of Vietnam Veterans-Spina Bifida and Covered Birth Defects Satisfactory Conduct and Cooperation § 21.8360 Satisfactory conduct and cooperation. The provisions for satisfactory conduct and cooperation...

A mechanistic multicentre, parallel group, randomised placebo-controlled trial of mesalazine for the treatment of IBS with diarrhoea (IBS-D).

PubMed

Lam, Ching; Tan, Wei; Leighton, Matthew; Hastings, Margaret; Lingaya, Melanie; Falcone, Yirga; Zhou, Xiaoying; Xu, Luting; Whorwell, Peter; Walls, Andrew F; Zaitoun, Abed; Montgomery, Alan; Spiller, Robin

2016-01-01

Immune activation has been reported in the mucosa of IBS patients with diarrhoea (IBS-D), and some small studies have suggested that mesalazine may reduce symptoms. We performed a double-blind, randomised placebo-controlled trial of 2 g mesalazine twice daily versus placebo for 3 months in patients with Rome III criteria IBS-D. Primary outcome was daily average stool frequency during weeks 11-12; secondary outcomes were abdominal pain, stool consistency, urgency and satisfactory relief of IBS symptoms. Participants were randomised after a 2-week baseline stool diary. All participants completed a 12-week stool diary and at the end of each week recorded the presence of 'satisfactory relief of IBS symptoms'. 136 patients with IBS-D (82 women, 54 men) were randomised, 10 patients withdrew from each group. Analysis by intention to treat showed the daily average stool frequency during weeks 11 and 12 were mean (SD), 2.8 (1.2) in mesalazine and 2.7 (1.9) in the placebo group with no significant group difference, (95% CI) 0.1 (-0.33 to 0.53), p=0.66. Mesalazine did not improve abdominal pain, stool consistency nor percentage with satisfactory relief compared with placebo during the last two-weeks follow-up. This study does not support any clinically meaningful benefit or harm of mesalazine compared with placebo in unselected patients with IBS-D. More precise subtyping based on underlying disease mechanisms is needed to allow more effective targeting of treatment in IBS. NCT01316718. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Mechanization of and experience with a triplex fly-by-wire backup control system

NASA Technical Reports Server (NTRS)

Lock, W. P.; Petersen, W. R.; Whitman, G. B.

1976-01-01

A redundant three axis analog control system was designed and developed to back up a digital fly by wire control system for an F-8C airplane. The mechanization and operational experience with the backup control system, the problems involved in synchronizing it with the primary system, and the reliability of the system are discussed. The backup control system was dissimilar to the primary system, and it provided satisfactory handling through the flight envelope evaluated. Limited flight tests of a variety of control tasks showed that control was also satisfactory when the backup control system was controlled by a minimum displacement (force) side stick. The operational reliability of the F-8 digital fly by wire control system was satisfactory, with no unintentional downmodes to the backup control system in flight. The ground and flight reliability of the system's components is discussed.

Physico-Chemical Properties, Aerosolization and Dissolution of Co-Spray Dried Azithromycin Particles with L-Leucine for Inhalation

PubMed Central

Mangal, Sharad; Nie, Haichen; Xu, Rongkun; Guo, Rui; Cavallaro, Alex; Zemlyanov, Dmitry; Zhou, Qi (Tony)

2018-01-01

Purpose Inhalation therapy is popular to treat lower respiratory tract infections. Azithromycin is effective against some bacteria that cause respiratory tract infections; but it has poor water solubility that may limit its efficacy when administrated as inhalation therapy. In this study, dry powder inhaler formulations were developed by co-spray drying azithromycin with L-leucine with a purpose to improve dissolution. Methods The produced powder formulations were characterized regarding particle size, morphology, surface composition and in-vitro aerosolization performance. Effects of L-leucine on the solubility and in-vitro dissolution of azithromycin were also evaluated. Results The spray dried azithromycin alone formulation exhibited a satisfactory aerosol performance with a fine particle fraction (FPF) of 62.5 ± 4.1%. Addition of L-leucine in the formulation resulted in no significant change in particle morphology and FPF, which can be attributed to enrichment of azithromycin on the surfaces of composite particles. Importantly, compared with the spray-dried amorphous azithromycin alone powder, the co-spray dried powder formulations of azithromycin and L-leucine demonstrated a substantially enhanced in-vitro dissolution rate. Such enhanced dissolution of azithromycin could be attributed to the formation of composite system and the acidic microenvironment around azithromycin molecules created by the dissolution of acidic L-leucine in the co-spray dried powder. Fourier transform infrared spectroscopic data showed intermolecular interactions between azithromycin and L-leucine in the co-spray dried formulations. Conclusions We developed the dry powder formulations with satisfactory aerosol performance and enhanced dissolution for a poorly water soluble weak base, azithromycin, by co-spray drying with an amino acid, L-leucine. PMID:29374368

Physico-Chemical Properties, Aerosolization and Dissolution of Co-Spray Dried Azithromycin Particles with L-Leucine for Inhalation.

PubMed

Mangal, Sharad; Nie, Haichen; Xu, Rongkun; Guo, Rui; Cavallaro, Alex; Zemlyanov, Dmitry; Zhou, Qi Tony

2018-01-08

Inhalation therapy is popular to treat lower respiratory tract infections. Azithromycin is effective against some bacteria that cause respiratory tract infections; but it has poor water solubility that may limit its efficacy when administrated as inhalation therapy. In this study, dry powder inhaler formulations were developed by co-spray drying azithromycin with L-leucine with a purpose to improve dissolution. The produced powder formulations were characterized regarding particle size, morphology, surface composition and in-vitro aerosolization performance. Effects of L-leucine on the solubility and in-vitro dissolution of azithromycin were also evaluated. The spray dried azithromycin alone formulation exhibited a satisfactory aerosol performance with a fine particle fraction (FPF) of 62.5 ± 4.1%. Addition of L-leucine in the formulation resulted in no significant change in particle morphology and FPF, which can be attributed to enrichment of azithromycin on the surfaces of composite particles. Importantly, compared with the spray-dried amorphous azithromycin alone powder, the co-spray dried powder formulations of azithromycin and L-leucine demonstrated a substantially enhanced in-vitro dissolution rate. Such enhanced dissolution of azithromycin could be attributed to the formation of composite system and the acidic microenvironment around azithromycin molecules created by the dissolution of acidic L-leucine in the co-spray dried powder. Fourier transform infrared spectroscopic data showed intermolecular interactions between azithromycin and L-leucine in the co-spray dried formulations. We developed the dry powder formulations with satisfactory aerosol performance and enhanced dissolution for a poorly water soluble weak base, azithromycin, by co-spray drying with an amino acid, L-leucine.

Training Feedforward Neural Networks Using Symbiotic Organisms Search Algorithm

PubMed Central

Wu, Haizhou; Luo, Qifang

2016-01-01

Symbiotic organisms search (SOS) is a new robust and powerful metaheuristic algorithm, which stimulates the symbiotic interaction strategies adopted by organisms to survive and propagate in the ecosystem. In the supervised learning area, it is a challenging task to present a satisfactory and efficient training algorithm for feedforward neural networks (FNNs). In this paper, SOS is employed as a new method for training FNNs. To investigate the performance of the aforementioned method, eight different datasets selected from the UCI machine learning repository are employed for experiment and the results are compared among seven metaheuristic algorithms. The results show that SOS performs better than other algorithms for training FNNs in terms of converging speed. It is also proven that an FNN trained by the method of SOS has better accuracy than most algorithms compared. PMID:28105044

Centralized PI control for high dimensional multivariable systems based on equivalent transfer function.

PubMed

Luan, Xiaoli; Chen, Qiang; Liu, Fei

2014-09-01

This article presents a new scheme to design full matrix controller for high dimensional multivariable processes based on equivalent transfer function (ETF). Differing from existing ETF method, the proposed ETF is derived directly by exploiting the relationship between the equivalent closed-loop transfer function and the inverse of open-loop transfer function. Based on the obtained ETF, the full matrix controller is designed utilizing the existing PI tuning rules. The new proposed ETF model can more accurately represent the original processes. Furthermore, the full matrix centralized controller design method proposed in this paper is applicable to high dimensional multivariable systems with satisfactory performance. Comparison with other multivariable controllers shows that the designed ETF based controller is superior with respect to design-complexity and obtained performance. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

High-Pressure Hot-Gas Self-Acting Floating Ring Shaft Seal for Liquid Rocket Turbopumps. [tapered bore seals

NASA Technical Reports Server (NTRS)

Burcham, R. E.; Diamond, W. A.

1980-01-01

Design analysis, detail design, fabrication, and experimental evaluation was performed on two self acting floating ring shaft seals for a rocket engine turbopump high pressure 24132500 n/sq m (3500 psig) hot gas 533 K 9500 F) high speed 3142 rad/sec (30000 rmp) turbine. The initial design used Rayleigh step hydrodynamic lift pads to assist in centering the seal ring with minimum rubbing contact. The final design used a convergent tapered bore to provide hydrostatic centering force. The Rayleigh step design was tested for 107 starts and 4.52 hours total. The leakage was satisfactory; however, the design was not acceptable due to excessive wear caused by inadequate centering force and failure of the sealing dam caused by erosion damage. The tapered bore design was tested for 370 starts and 15.93 hours total. Satisfactory performance for the required life of 7.5 hours per seal was successfully demonstrated.

A short-term clinical evaluation of IPS Empress 2 crowns.

PubMed

Toksavul, Suna; Toman, Muhittin

2007-01-01

The aim of this study was to evaluate the clinical performance of all-ceramic crowns made with the IPS Empress 2 system after an observation period of 12 to 60 months. Seventy-nine IPS Empress 2 crowns were placed in 21 patients. The all-ceramic crowns were evaluated clinically, radiographically, and using clinical photographs. The evaluations took place at baseline (2 days after cementation) and at 6-month intervals for 12 to 60 months. Survival rate of the crowns was determined using Kaplan-Meier statistical analysis. Based on the US Public Health Service criteria, 95.24% of the crowns were rated satisfactory after a mean follow-up period of 58 months. Fracture was registered in only 1 crown. One endodontically treated tooth failed as a result of fracture at the cervical margin area. In this in vivo study, IPS Empress 2 crowns exhibited a satisfactory clinical performance during an observation period ranging from 12 to 60 months.

High Pressure, Earth-storable Rocket Technology. Volume 1

NASA Technical Reports Server (NTRS)

Jassowski, D. M.

1997-01-01

The effect of elevated chamber pressure on combustion efficiency and heat transfer has been determined at the 100 lbf (445 N) thrust level for nitrogen tetroxide propellants. Measurements were made up to 500 psia (3.45 MPa) with testbed hardware; tests at 100 psia (0.690 MPa) and 250 psia (1.72 MPa) were made with radiation-cooled rhenium chambers. The first task of the program served to determine desirable thruster applications and operating conditions: high total impulse, i.e., communication satellite or spacecraft bus axial engines, at chamber pressures up to 250 psia (1.72 MPa) pressure-fed, or up to 500 psia (3.45 MPa) pump-fed. The hardware modifications and testing required to obtain the data were determined in Task 2, which included design-support hot fire tests; supplemental hardware, including a 250 psia (1.72 MPa) Pc rhenium chamber and a 20% fuel-film cooled platelet injector was fabricated in Task 3. Testing showed that satisfactory operation of Ir-Re radiation chambers is assured at pressures up to 250 psia and may be possible up to 500. The heat transfer data obtained show good correlation with throat Reynolds number and are generally under values given by the simplified Bartz equation; chambers equilibrium temperatures match predicted values. Preliminary optimization of trip configuration and mixture ratio were made; Isp performance from thrust measurements was within 1% of predicted values. Stability, compatibility, and front-end thermal management were determined to be satisfactory.

Hepatic resection for post-cholecystectomy bile duct injuries: a literature review.

PubMed

Truant, Stéphanie; Boleslawski, Emmanuel; Lebuffe, Gilles; Sergent, Géraldine; Pruvot, François-René

2010-06-01

This study seeks to identify factors for hepatectomy in the management of post-cholecystectomy bile duct injury (BDI) and outcome via a systematic review of the literature. Relevant literature was found by searching the PubMed database and the bibliographies of extracted articles. To avoid bias selection, factors for hepatectomy were analysed in series reporting both patients undergoing hepatectomy and patients undergoing biliary repair without hepatectomy (bimodal treatment). Relevant variables were the presence or absence of additional hepatic artery and/or portal vein injury, the level of BDI, and a previous biliary repair. Among 460 potentially relevant publications, only 31 met the eligibility criteria. A total of 99 hepatectomies were reported among 1756 (5.6%) patients referred for post-cholecystectomy BDI. In eight series reporting bimodal treatment, including 232 patients, logistic regression multivariate analysis showed that hepatic arterial and Strasberg E4 and E5 injuries were independent factors associated with hepatectomy. Patients with combined arterial and Strasberg E4 or E5 injury were 43.3 times more likely to undergo hepatectomy (95% confidence interval 8.0-234.2) than patients without complex injury. Despite high postoperative morbidity, mortality rates were comparable with those of hepaticojejunostomy, except in urgent hepatectomies (within 2 weeks; four of nine patients died). Longterm outcome was satisfactory in 12 of 18 patients in the largest series. Hepatectomies were performed mainly in patients showing complex concurrent Strasberg E4 or E5 and hepatic arterial injury and provided satisfactory longterm outcomes despite high postoperative morbidity.

Antiviral treatment of Bell's palsy based on baseline severity: a systematic review and meta-analysis.

PubMed

Turgeon, Ricky D; Wilby, Kyle J; Ensom, Mary H H

2015-06-01

We conducted a systematic review with meta-analysis to evaluate the efficacy of antiviral agents on complete recovery of Bell's palsy. We searched CENTRAL, Embase, MEDLINE, International Pharmaceutical Abstracts, and sources of unpublished literature to November 1, 2014. Primary and secondary outcomes were complete and satisfactory recovery, respectively. To evaluate statistical heterogeneity, we performed subgroup analysis of baseline severity of Bell's palsy and between-study sensitivity analyses based on risk of allocation and detection bias. The 10 included randomized controlled trials (2419 patients; 807 with severe Bell's palsy at onset) had variable risk of bias, with 9 trials having a high risk of bias in at least 1 domain. Complete recovery was not statistically significantly greater with antiviral use versus no antiviral use in the random-effects meta-analysis of 6 trials (relative risk, 1.06; 95% confidence interval, 0.97-1.16; I(2) = 65%). Conversely, random-effects meta-analysis of 9 trials showed a statistically significant difference in satisfactory recovery (relative risk, 1.10; 95% confidence interval, 1.02-1.18; I(2) = 63%). Response to antiviral agents did not differ visually or statistically between patients with severe symptoms at baseline and those with milder disease (test for interaction, P = .11). Sensitivity analyses did not show a clear effect of bias on outcomes. Antiviral agents are not efficacious in increasing the proportion of patients with Bell's palsy who achieved complete recovery, regardless of baseline symptom severity. Copyright © 2015 Elsevier Inc. All rights reserved.

High Pressure, Earth-storable Rocket Technology. Volume 2

NASA Technical Reports Server (NTRS)

Jassowski, D. M.

1997-01-01

The effect of elevated chamber pressure on combustion efficiency and heat transfer has been determined at the 100 lbf (445 N) thrust level for nitrogen tetroxide propellants. Measurements were made up to 500 psia (3.45 Mpa) with testbed hardware; tests at 100 psia (0.690 MPa) and 250 psia (1.72 MPa) were made with radiation-cooled rhenium chambers. The first task of the program served to determine desirable thruster applications and operating conditions: high total impulse, i.e. communication satellite or spacecraft bus axial engines, at chamber pressures up to 250 psia (1.72 MPa) pressure-fed, or up to 500 psia (3.45 MPa) pump-fed. The hardware modifications and testing required to obtain the data were determined in Task 2, which included design-support hot fire tests; supplemental hardware, including a 250 psia (1.72 MPa) Pc rhenium chamber and a 20% fuel-film cooled platelet injector was fabricated in Task 3. Testing showed that satisfactory operation of Ir-Re radiation chambers is assured at pressures up to 250 psia and may be possible up to 500. The heat transfer data obtained show good correlation with throat Reynolds number and are generally under values given by the simplified Bartz equation; chambers equilibrium temperatures match predicted values. Preliminary optimization of trip configuration and mixture ratio were made; Isp performance from thrust measurements was within 1% of predicted values. Stability, compatibility, and front-end thermal management were determined to be satisfactory.

High Pressure, Earth-Storable Rocket Technology. Volume 3; Appendices C and D

NASA Technical Reports Server (NTRS)

Jassowski, D. M.

1997-01-01

The effect of elevated chamber pressure on combustion efficiency and heat transfer has been determined at the 100 lbf (445 N) thrust level for nitrogen tetroxide propellants. Measurements were made up to 500 psia (3.45 MPa) with testbed hardware; tests at 100 psia (0.690 MPa) and 250 psia (1.72 MPa) were made with radiation-cooled rhenium chambers. The first task of the program served to determine desirable thruster applications and operating conditions: high total impulse, i.e. communication satellite or spacecraft bus axial engines, at chamber pressures up to 250 psia (1.72 MPa) pressure-fed, or up to 500 psia (3.45 MPa) pump-fed. The hardware modifications and testing required to obtain the data were determined in Task 2, which included design-support hot fire tests; supplemental hardware, including a 250 psia (1.72 MPa) Pc rhenium chamber and a 20% fuel-film cooled platelet injector was fabricated in Task 3. Testing showed that satisfactory operation of Ir-Re radiation chambers is assured at pressures up to 250 psia and may be possible up to 500. The heat transfer data obtained show good correlation with throat Reynolds number and are generally under values given by the simplified Bartz equation; chambers equilibrium temperatures match predicted values. Preliminary optimization of trip configuration and mixture ratio were made; Isp performance from thrust measurements was within 1% of predicted values. Stability, compatibility, and front-end thermal management were determined to be satisfactory.

Measuring and Improving the Quality of Preprocedural Assessments.

PubMed

Manji, Farah; McCarty, Kelsey; Kurzweil, Vanessa; Mark, Eden; Rathmell, James P; Agarwala, Aalok V

2017-06-01

Preprocedural assessments are used by anesthesia providers to optimize perioperative care for patients undergoing invasive procedures. When these assessments are performed in advance by providers who are not caring for the patient during the procedure, there is an additional layer of complexity in ensuring that the workup meets the needs of the primary anesthesia care team. In this study, anesthesia providers were asked to rate the quality of preprocedural assessments prepared by other providers to evaluate anesthesia care team satisfaction. Quality ratings for preprocedural assessments were collected from anesthesia providers on the day of surgery using an electronic quality assurance tool from January 9, 2014 to October 21, 2014. Users could rate assessments as "exemplary," "satisfactory," or "unsatisfactory." Free text comments could be entered for any of the quality ratings chosen. A reviewer trained in clinical anesthesia categorized all comments as "positive," "constructive," or "neutral" and conducted in-depth chart reviews triggered by 67 "constructive" comments submitted during the first 3 months of data collection to further subcategorize perceived deficiencies in the preprocedural assessments. In May 2014, providers were asked to participate in a midpoint survey and provide general feedback about the preprocedural process and evaluations. 37,611 procedures requiring anesthesia were analyzed. Of the 17,522 (46.6%) cases with a rated preprocedural assessment, anesthesia providers rated 3828 (21.8%) as "exemplary," 13,454 (76.8%) as "satisfactory," and 240 (1.4%) as "unsatisfactory." The monthly proportion of "unsatisfactory" ratings ranged from 3.1% to 0% over the study period, whereas the midpoint survey showed that anesthesia providers estimated that the number of unsatisfactory evaluations was 11.5%. Preprocedural evaluations performed on inpatients received significantly better ratings than evaluations performed on outpatients by the preadmission testing clinic or phone program (P < .0001). The most common reason given for "unsatisfactory" ratings was a perception of "missing information" (49.2%). Chart reviews revealed that inadequate documentation was in reality the most common deficiency in preprocedural evaluations (35 of 67 reviews, 52.2%). The overwhelming majority of preprocedural assessments performed at our institution were considered satisfactory or exemplary by day-of-surgery anesthesia providers. This was demonstrated by both the case-by-case ratings and midpoint survey. However, the perceived frequency of "unsatisfactory" evaluations was worse when providers were asked to reflect on the quality of preprocedural evaluations generally versus rate them individually. Analysis of comments left by providers allowed us to identify specific and actionable areas for improvement. This method can be used by other institutions to identify systemic deficiencies in the preprocedural evaluation process.

Smart Water Conservation System for Irrigated Landscape. ESTCP Cost and Performance Report

DTIC Science & Technology

2016-10-01

water use by as much as 70% in support of meeting EO 13693. Additional performance objectives were to validate energy reduction, cost effectiveness ...Additional performance objectives were to validate energy reduction, cost effectiveness , and system reliability while maintaining satisfactory plant health...developments. The demonstration was conducted for two different climatic regions in the southwestern part of the United States (U.S.), where a typical

Correlations among Six Learner Variables and the Performance of a Sample of Jamaican Eleventh-Graders on an Achievement Test on Respiration

ERIC Educational Resources Information Center

Soyibo, Kola; Pinnock, Jacqueline

2005-01-01

This study aimed at establishing if the level of performance of 500 Jamaican Grade 11 students on an achievement test on the concept of respiration was satisfactory (mean = 28 or 70% and above) or not (less than 70%); if there were statistically significant differences in their performance on the concept linked to their gender, cognitive abilities…

Evaluating resistance of hot mix asphalt to reflective cracking using geocomposites.

DOT National Transportation Integrated Search

2013-01-01

The Pennsylvania Department of Transportation has sponsored a project with Penn State to evaluate new or : existing products to ensure satisfactory application and performance of these products. PennDOT Publication : 447 contains those products that ...

0-6687 : minimize premature distresses in continuously reinforced concrete pavement : [project summary].

DOT National Transportation Integrated Search

2013-08-01

The performance of continuously reinforced concrete : pavement (CRCP) has been quite satisfactory in Texas, : providing one of the most cost-effective pavement systems : for the Texas Department of Transportation (TxDOT). : However, distresses do occ...

Performance of ultra-thin whitetopping (UTW) in Oklahoma.

DOT National Transportation Integrated Search

2010-12-01

With the current level of deterioration of pavements in Oklahoma and the United States a satisfactory repai : technique that is economical and can be applied rapidly while resisting a significant volume of traffic is becomin : important. Thin concret...

Double half-cone flap umbilicoplasty for proboscoid umbilical hernia in a 2 years old child with satisfactory results 2 years later.

PubMed

Ashu, Eseme Ebai; Leroy, Guifo Marc; Aristide, Bang Guy; Joss, Bitang Mafok Louis; Bonaventure, Jemea; Patrick, Savom Eric; Myriam, Fotso Guegne

2015-01-01

Surgical repair of large umbilical hernias may present a challenging surgical problem; standard surgical techniques have proven to be inadequate for both closing the fascial defect of the umbilicus and providing a satisfactory cosmetic result. We describe here a case of double half-cone flap umbilicoplasty that was performed in a 2 years old boy. The case of a 2 years old child with proboscoid umbilical hernia. The protruding umbilical skin was excised sharply by two V-shaped cuts leaving two half cones, a short cephalic (0.5cm) and a long caudal (1cm). A classic herniotomy was carried out, with repair of the facial defect. The caudal half cone was sutured from its apex till half it's length upon itself with interrupted sutures and it was anchored deeply to the fascia. Then we inverted the cephalic half cone which was sutured to the caudal cone to form the new umbilicus. The early result was excellent with no complications and the result after 2years revealed a cosmetically satisfactory shape of the umbilicus. this technique provides a good solution for reconstruction of the protruding umbilical skin and it is easy to learn, easy to be taught and perform in surgical environments and may be applicable for any kind of umbilical reconstruction.

Double half-cone flap umbilicoplasty for proboscoid umbilical hernia in a 2 years old child with satisfactory results 2 years later

PubMed Central

Ashu, Eseme Ebai; Leroy, Guifo Marc; Aristide, Bang Guy; Joss, Bitang Mafok Louis; Bonaventure, Jemea; Patrick, Savom Eric; Myriam, Fotso Guegne

2015-01-01

Surgical repair of large umbilical hernias may present a challenging surgical problem; standard surgical techniques have proven to be inadequate for both closing the fascial defect of the umbilicus and providing a satisfactory cosmetic result. We describe here a case of double half-cone flap umbilicoplasty that was performed in a 2 years old boy. The case of a 2 years old child with proboscoid umbilical hernia. The protruding umbilical skin was excised sharply by two V-shaped cuts leaving two half cones, a short cephalic (0.5cm) and a long caudal (1cm). A classic herniotomy was carried out, with repair of the facial defect. The caudal half cone was sutured from its apex till half it's length upon itself with interrupted sutures and it was anchored deeply to the fascia. Then we inverted the cephalic half cone which was sutured to the caudal cone to form the new umbilicus. The early result was excellent with no complications and the result after 2years revealed a cosmetically satisfactory shape of the umbilicus. this technique provides a good solution for reconstruction of the protruding umbilical skin and it is easy to learn, easy to be taught and perform in surgical environments and may be applicable for any kind of umbilical reconstruction. PMID:26664545

Haematological validation of a computer-based bone marrow reporting system.

PubMed Central

Nguyen, D T; Diamond, L W; Cavenagh, J D; Parameswaran, R; Amess, J A

1997-01-01

AIMS: To prove the safety and effectiveness of "Professor Belmonte", a knowledge-based system for bone marrow reporting, a formal evaluation of the reports generated by the system was performed. METHODS: Three haematologists (a consultant, a senior registrar, and a junior registrar), none of whom were involved in the development of the software, compared the unedited reports generated by Professor Belmonte with the original bone marrow reports in 785 unselected cases. Each haematologist independently graded the quality of Belmonte's reports using one of four categories: (a) better than the original report (more informative, containing useful information missing in the original report); (b) equivalent to the original report; (c) satisfactory, but missing information that should have been included; and (d) unsatisfactory. RESULTS: The consultant graded 64 reports as more informative than the original, 687 as equivalent to the original, 32 as satisfactory, and two as unsatisfactory. The senior registrar considered 29 reports to be better than the original, 739 to be equivalent to the original, 15 to be satisfactory, and two to be unsatisfactory. The junior registrar found that 88 reports were better than the original, 681 were equivalent to the original, 14 were satisfactory, and two were unsatisfactory. Each judge found two different reports to be unsatisfactory according to their criteria. All 785 reports generated by the computer system received at least two scores of satisfactory or better. CONCLUSIONS: In this representative study, Professor Belmonte generated bone marrow reports that proved to be as accurate as the original reports in a large university hospital. The haematology knowledge contained within the system, the reasoning process, and the function of the software are safe and effective for assisting haematologists in generating high quality bone marrow reports. PMID:9215118

Equine sperm-bound antisperm antibodies are associated with poor semen quality.

PubMed

Ferrer, M S; Miller, L M J

2018-06-01

Antisperm antibodies (ASAs) have been associated with infertility in stallions. The objectives of this study were to investigate the frequency of ASA-positive semen samples in satisfactory and non-satisfactory breeder stallions, the association between ASA binding and semen quality, and factors that may affect the diagnosis. Breeding soundness examinations were performed in 21 stallions and the percentage of IgG- and IgA-bound spermatozoa was evaluated using flow cytometry. Median IgG and IgA binding did not differ between the first and second ejaculates. The percentage of IgA-bound spermatozoa was higher in non-satisfactory (n = 10) than satisfactory breeder stallions (n = 11). However, IgG binding or frequency of IgG-positive ejaculates did not differ with stallion classification. The IgG-positive stallions had significantly lower total sperm motility, concentration and total numbers than IgG-negative stallions in the first ejaculate, and lower sperm concentration in the second ejaculate. The IgA-positive stallions had lower total sperm motility, normal spermatozoa and total numbers than IgA-negative stallions in the first ejaculate, and lower total sperm motility, normal spermatozoa and total numbers in the second ejaculate. While IgG binding did not differ with season, IgA binding was higher in the non-breeding season (n = 6 stallions) than the breeding season (n = 15 stallions) in the first ejaculate. Stallion age did not differ with ASA classification. In conclusion, IgG binding was highly prevalent in both groups of stallions, while IgA binding was higher and more prevalent in non-satisfactory breeders. Both isotypes were associated with poor semen quality. Season and sexual rest had an effect on IgA but not IgG binding. Copyright © 2018 Elsevier Inc. All rights reserved.

Development and Validation of a Safety Climate Scale for Manufacturing Industry

PubMed Central

Ghahramani, Abolfazl; Khalkhali, Hamid R.

2015-01-01

Background This paper describes the development of a scale for measuring safety climate. Methods This study was conducted in six manufacturing companies in Iran. The scale developed through conducting a literature review about the safety climate and constructing a question pool. The number of items was reduced to 71 after performing a screening process. Results The result of content validity analysis showed that 59 items had excellent item content validity index (≥ 0.78) and content validity ratio (> 0.38). The exploratory factor analysis resulted in eight safety climate dimensions. The reliability value for the final 45-item scale was 0.96. The result of confirmatory factor analysis showed that the safety climate model is satisfactory. Conclusion This study produced a valid and reliable scale for measuring safety climate in manufacturing companies. PMID:26106508

Robust adaptive antiswing control of underactuated crane systems with two parallel payloads and rail length constraint.

PubMed

Zhang, Zhongcai; Wu, Yuqiang; Huang, Jinming

2016-11-01

The antiswing control and accurate positioning are simultaneously investigated for underactuated crane systems in the presence of two parallel payloads on the trolley and rail length limitation. The equations of motion for the crane system in question are established via the Euler-Lagrange equation. An adaptive control strategy is proposed with the help of system energy function and energy shaping technique. Stability analysis shows that under the designed adaptive controller, the payload swings can be suppressed ultimately and the trolley can be regulated to the destination while not exceeding the pre-specified boundaries. Simulation results are provided to show the satisfactory control performances of the presented control method in terms of working efficiency as well as robustness with respect to external disturbances. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Successful combination immunotherapy of anti-gamma aminobutyric acid (GABA)A receptor antibody-positive encephalitis with extensive multifocal brain lesions.

PubMed

Fukami, Yuki; Okada, Hiroaki; Yoshida, Mari; Yamaguchi, Keiji

2017-08-31

A 78-year old woman who presented with akinetic mutism was admitted to our hospital. Brain MRI showed multifocal increased T 2 /FLAIR signal with extensive cortical-subcortical involvement. We suspected autoimmune encephalitis and the patient received methylprednisolone pulse. Her conscious level gradually recovered, but later relapsed again and presented with refractory status epilepticus. We treated her with intravenous immunoglobulin, plasma exchange and pulsed cyclophosphamide, with satisfactory response. A brain biopsy showed perivascular lymphocytic infiltrates and reactive gliosis. Anti-gamma aminobutyric acid (GABA) A receptor antibodies test came back to be positive after her recovery, and the diagnosis of anti-GABA A receptor antibody-positive encephalitis was made. This is a very rare case where brain biopsies were performed in a patient with anti-GABA A receptor antibody-positive encephalitis.

An approach for traffic prohibition sign detection

NASA Astrophysics Data System (ADS)

Li, Qingquan; Xu, Dihong; Li, Bijun; Zeng, Zhe

2006-10-01

This paper presents an off-line traffic prohibition sign detection approach, whose core is based on combination with the color feature of traffic prohibition signs, shape feature and degree of circularity. Matlab-Image-processing toolbox is used for this purpose. In order to reduce the computational cost, a pre-processing of the image is applied before the core. Then, we employ the obvious redness attribute of prohibition signs to coarsely eliminate the non-redness image in the input data. Again, a edge-detection operator, Canny edge detector, is applied to extract the potential edge. Finally, Degree of circularity is used to verdict the traffic prohibition sign. Experimental results show that our systems offer satisfactory performance.

Electromagnetic interference shielding performance of nano-layered Ti3SiC2 ceramics at high-temperatures

NASA Astrophysics Data System (ADS)

Li, Sigong; Tan, Yongqiang; Xue, Jiaxiang; Liu, Tong; Zhou, Xiaosong; Zhang, Haibin

2018-01-01

The X-band electromagnetic interference (EMI) shielding properties of nano-layered Ti3SiC2 ceramics were evaluated from room temperature up to 800°C in order to explore the feasibility of Ti3SiC2 as efficient high temperature EMI shielding material. It was found that Ti3SiC2 exhibits satisfactory EMI shielding effectiveness (SE) close to 30 dB at room temperature and the EMI SE shows good temperature stability. The remarkable EMI shielding properties of Ti3SiC2 can be mainly attributed to high electrical conductivity, high dielectric loss and more importantly the multiple reflections due to the layered structure.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang X. R.; Siddons D.; Macrander, A.T.

Realization of x-ray Fabry-Perot (FP) resonance in back-Bragg-reflection crystal cavities has been proposed and explored for many years, but to date no satisfactory performance has been achieved. Here we show that single-cavity crystal resonators intrinsically have limited finesse and efficiency. To break this limit, we demonstrate that monolithic multicavity resonators with equal-width cavities and specific plate thickness ratios can generate ultrahigh-resolution FP resonance with high efficiency, steep peak tails, and ultrahigh contrast simultaneously. The resonance mechanism is similar to that of sequentially cascaded single-cavity resonators. The ultranarrow-bandwidth FP resonance is anticipated to have various applications, including modern ultrahigh-resolution or precisionmore » x-ray monochromatization, spectroscopy, coherence purification, coherent diffraction, phase contrast imaging, etc.« less

Deep convolutional neural network for prostate MR segmentation

NASA Astrophysics Data System (ADS)

Tian, Zhiqiang; Liu, Lizhi; Fei, Baowei

2017-03-01

Automatic segmentation of the prostate in magnetic resonance imaging (MRI) has many applications in prostate cancer diagnosis and therapy. We propose a deep fully convolutional neural network (CNN) to segment the prostate automatically. Our deep CNN model is trained end-to-end in a single learning stage based on prostate MR images and the corresponding ground truths, and learns to make inference for pixel-wise segmentation. Experiments were performed on our in-house data set, which contains prostate MR images of 20 patients. The proposed CNN model obtained a mean Dice similarity coefficient of 85.3%+/-3.2% as compared to the manual segmentation. Experimental results show that our deep CNN model could yield satisfactory segmentation of the prostate.

Performance of Air-cooled Engine Cylinders Using Blower Cooling

NASA Technical Reports Server (NTRS)

Schey, Oscar W; Ellerbrock, Herman H , Jr

1936-01-01

An investigation was made to obtain information on the minimum quantity of air and power required to cool conventional air cooled cylinders at various operating conditions when using a blower. The results of these tests show that the minimum power required for satisfactory cooling with an overall blower efficiency of 100 percent varied from 2 to 6 percent of the engine power depending on the operating conditions. The shape of the jacket had a large effect on the cylinder temperatures. Increasing the air speed over the front of the cylinder by keeping the greater part of the circumference of the cylinder covered by the jacket reduced the temperatures over the entire cylinder.

Evaluation of the AnnAGNPS Model for Predicting Runoff and Nutrient Export in a Typical Small Watershed in the Hilly Region of Taihu Lake.

PubMed

Luo, Chuan; Li, Zhaofu; Li, Hengpeng; Chen, Xiaomin

2015-09-02

The application of hydrological and water quality models is an efficient approach to better understand the processes of environmental deterioration. This study evaluated the ability of the Annualized Agricultural Non-Point Source (AnnAGNPS) model to predict runoff, total nitrogen (TN) and total phosphorus (TP) loading in a typical small watershed of a hilly region near Taihu Lake, China. Runoff was calibrated and validated at both an annual and monthly scale, and parameter sensitivity analysis was performed for TN and TP before the two water quality components were calibrated. The results showed that the model satisfactorily simulated runoff at annual and monthly scales, both during calibration and validation processes. Additionally, results of parameter sensitivity analysis showed that the parameters Fertilizer rate, Fertilizer organic, Canopy cover and Fertilizer inorganic were more sensitive to TN output. In terms of TP, the parameters Residue mass ratio, Fertilizer rate, Fertilizer inorganic and Canopy cover were the most sensitive. Based on these sensitive parameters, calibration was performed. TN loading produced satisfactory results for both the calibration and validation processes, whereas the performance of TP loading was slightly poor. The simulation results showed that AnnAGNPS has the potential to be used as a valuable tool for the planning and management of watersheds.

Performance of Radiant Heating Systems of Low-Energy Buildings

NASA Astrophysics Data System (ADS)

Sarbu, Ioan; Mirza, Matei; Crasmareanu, Emanuel

2017-10-01

After the introduction of plastic piping, the application of water-based radiant heating with pipes embedded in room surfaces (i.e., floors, walls, and ceilings), has significantly increased worldwide. Additionally, interest and growth in radiant heating and cooling systems have increased in recent years because they have been demonstrated to be energy efficient in comparison to all-air distribution systems. This paper briefly describes the heat distribution systems in buildings, focusing on the radiant panels (floor, wall, ceiling, and floor-ceiling). Main objective of this study is the performance investigation of different types of low-temperature heating systems with different methods. Additionally, a comparative analysis of the energy, environmental, and economic performances of floor, wall, ceiling, and floor-ceiling heating using numerical simulation with Transient Systems Simulation (TRNSYS) software is performed. This study showed that the floor-ceiling heating system has the best performance in terms of the lowest energy consumption, operation cost, CO2 emission, and the nominal boiler power. The comparison of the room operative air temperatures and the set-point operative air temperature indicates also that all radiant panel systems provide satisfactory results without significant deviations.

Knee arthrodesis with a press-fit modular intramedullary nail without bone-on-bone fusion after an infected revision TKA.

PubMed

Iacono, Francesco; Bruni, Danilo; Lo Presti, Mirco; Raspugli, Giovanni; Bondi, Alice; Sharma, Bharat; Marcacci, Maurilio

2012-10-01

Knee arthrodesis can be an effective treatment after an infected revision Total Knee Arthroplasty (TKA). The main hypothesis of this study is that a two-stage arthrodesis of the knee using a press-fit, modular intramedullary nail and antibiotic loaded cement, to fill the residual gap between the bone surfaces, prevents an excessive limb shortening, providing satisfactory clinical and functional results even without direct bone-on-bone fusion. The study included 22 patients who underwent knee arthrodesis between 2004 and 2009 because of recurrent infection following revision-TKA (R-TKA). Clinical and functional evaluations were performed using the Visual Analogue Scale (VAS) and the Lequesne Algofunctional Score. A postoperative clinical and radiographical evaluation of the residual limb-length discrepancy was conducted by three independent observers. VAS and LAS results showed a significant improvement with respect to the preoperative condition. The mean leg length discrepancy was less than 1cm. There were three recurrent infections that needed further surgical treatment. This study demonstrated that reinfection after Revision of total knee Arthroplasty can be effectively treated with arthrodesis using a modular intramedullary nail, along with an antibiotic loaded cement spacer and that satisfactory results can be obtained without direct bone-on-bone fusion. Published by Elsevier B.V.

36 CFR 51.44 - How will the Director determine if a concessioner was satisfactory for purposes of a right of...

Code of Federal Regulations, 2010 CFR

2010-07-01

... determine if a concessioner was satisfactory for purposes of a right of preference? 51.44 Section 51.44... satisfactory for purposes of a right of preference? To be a satisfactory concessioner for the purposes of a... concessioner made subsequent to May 17, 2000 are less than satisfactory for any two or more years of operation...

Development of self-acting seals for helicopter engines

NASA Technical Reports Server (NTRS)

Lynwander, P.

1974-01-01

An experimental evaluation of a NASA-designed self-acting face seal for use in advanced gas turbine main shaft positions was conducted. The seal incorporated Rayleigh step pads (self-acting geometry) for lift augmentation. Satisfactory performance of the gas film seal was demonstrated in a 500-hour endurance test at speeds to 183 m/s (600 ft/sec, 54,000 rpm) and air pressure differential of 137 newtons per square centimeter (198.7 psi). Carbon wear was minor. Tests were also conducted with seal seat runout greater than that expected in engine operation and in a severe sand and dust environment. Seal operation was satisfactory in both these detrimental modes of operation.

Effect of Helicobacter pylori Eradication on Functional Dyspepsia

PubMed Central

Kim, Sung Eun; Park, Young Soo; Kim, Min Soo; Jo, Hyun Jin; Shin, Cheol Min; Lee, Sang Hyub; Hwang, Jin-Hyeok; Kim, Jin-Wook; Jeong, Sook-Hyang; Lee, Dong Ho; Jung, Hyun Chae

2013-01-01

Background/Aims This study evaluated the effect of Helicobacter pylori eradication on functional dyspepsia (FD), and the relationship between the changes of histological gastritis and FD symptom responses. Methods A total of 213 FD patients diagnosed by Rome III criteria were consecutively enrolled. H. pylori tests and gastritis grade by the Sydney system were performed before and 1 year after the proton pump based-eradication therapy for 7 days. Serum levels of pepsinogen, and genetic polymorphisms IL-6, IL-8 and IL-10 were investigated. Results Total of 91 patients completed the 1 year follow-up. When the response rate of dyspepsia was compared at 1 year between the non-eradicated group (n = 24) and eradicated group (n = 67), each group showed complete response of 62.5% and 62.7%; satisfactory response (≥ 50%) of 0.0% and 19.4%; partial response (< 50%) of 12.5% and 11.9%; and refractory response of 25.0% and 6.0%, respectively (P = 0.015). In addition, the responder group (complete + satisfactory response) at 1 year showed improvement of activity and chronic inflammation in both the antrum and corpus (all P < 0.001). Multivariate analysis showed that H. pylori eradication (OR, 5.81; 95% CI, 1.07-31.59) and symptom improvement at 3 month (OR, 28.90; 95% CI, 5.29-157.82) were associated with the improvement of dyspepsia at 1 year. Among the successfully eradicated FD patients (n = 67), male (P = 0.013) and higher initial BMI (P = 0.016) were associated with the improvement of dyspepsia at 1 year. Conclusions H. pylori eradication improved FD symptoms, as well as gastritis at 1 year, suggesting that inflammation mediates FD. PMID:23667755

Registration of 'Prevail' hard red spring wheat

USDA-ARS?s Scientific Manuscript database

Grower and end-user acceptance of new Hard Red Spring Wheat (HRSW; Triticum aestivum L.) cultivars is largely contingent upon satisfactory agronomic performance, end-use quality potential, and disease resistance levels. Additional characteristics, such as desirable plant height, can also contribute...

Design parameters and methodology for mechanically stabilized earth (MSE) walls.

DOT National Transportation Integrated Search

2014-10-01

Since its appearance in 1970s, mechanically stabilized earth (MSE) walls have become a majority among all types of retaining walls due to their economics and satisfactory performance. The Texas Department of Transportation (TxDOT) has primarily adopt...

Comparison of performance criteria for evaluating stake test data

Treesearch

Stan T. Lebow; Patricia K. Lebow; Grant T. Kirker

2017-01-01

Stake tests are a critical part of evaluating durability of wood in ground-contact, but there is a lack of criteria for interpreting stake test results. This paper discusses criteria that might be used to determine if short term ratings indicate satisfactory longterm performance. Ratings of 19 by 19 mm stakes from multiple plots in the Harrison Experimental Forest,...

Long-term follow-up of two patients with oligocone trichromacy.

PubMed

Smirnov, Vasily; Drumare, Isabelle; Bouacha, Ikram; Puech, Bernard; Defoort-Dhellemmes, Sabine

2015-10-01

Oligocone trichromacy (OT) is an uncommon cone dysfunction disorder, the mechanism of which remains poorly understood. OT has been thought to be non-progressive, but its long-term visual outcome has been seldom reported in the literature. Our aim was to present two OT patients followed at our institution over 18 years. Complete ocular examination, color vision, visual fields, and full-field electroretinography (ERG) were performed at initial presentation and follow-up. Spectral-domain optical coherence tomography (OCT) was performed during follow-up when available at our institution. Initial ocular examination showed satisfactory visual acuities with normal fundus examination and near-to-normal color vision. However, computerized perimetry demonstrated a ring-shaped scotoma around fixation, and ERG showed a profound cone dysfunction. The discrepancy between preserved color vision and profound cone dysfunction leads to the diagnosis of OT. Subsequent follow-ups over 18 years showed subtle degradation of visual acuities along with progression of the myopia in both patients and slight worsening of color vision in one patient. Initial OCT revealed a focal interruption of the ellipsoid line along with decreased thickness of the perifoveal macula. Subsequent OCT imaging performed 2 years later did not show any macular changes. Although OT is known to be a non-progressive cone dysfunction, our results suggest that subtle degradation of the visual function might happen over time.

SNAP 19 Viking Program. Bimonthly technical progress report, October 1979-November 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-12-01

Monitoring and evaluation of Viking 1 Lander power system data continued. The RTG series power range as measured at the PCDA was 65 to 68 watts at fin root temperatures between 280/sup 0/F and 310/sup 0/F. The Mars landed performance history of Viking 1 include both the minimum and maximum data for each of the SOL days. Monitoring and evaluation of Viking 2 Lander power system data continued. The RTG series power range as measured at the PCDA was 71 to 72 watts at fin root temperatures between 230/sup 0/F and 260/sup 0/F. The Mars landed performance history of Vikingmore » 2 include both the minimum and maximum data for each of the SOL days. The performance of both power systems continues to be very satisfactory. Power system performance data for Pioneer 10 and Pioneer 11 spacecraft were monitored through the reporting period. The estimated RTG system net power was 116 watts for Pioneer 10 and 118 watts for Pioneer Saturn. The September 1 encounter with Saturn appears to have had no deleterious effect on the RTG's of the spacecraft power system. The telemetry signals from both spacecrafts remain satisfactory.« less

A contourlet transform based algorithm for real-time video encoding

NASA Astrophysics Data System (ADS)

Katsigiannis, Stamos; Papaioannou, Georgios; Maroulis, Dimitris

2012-06-01

In recent years, real-time video communication over the internet has been widely utilized for applications like video conferencing. Streaming live video over heterogeneous IP networks, including wireless networks, requires video coding algorithms that can support various levels of quality in order to adapt to the network end-to-end bandwidth and transmitter/receiver resources. In this work, a scalable video coding and compression algorithm based on the Contourlet Transform is proposed. The algorithm allows for multiple levels of detail, without re-encoding the video frames, by just dropping the encoded information referring to higher resolution than needed. Compression is achieved by means of lossy and lossless methods, as well as variable bit rate encoding schemes. Furthermore, due to the transformation utilized, it does not suffer from blocking artifacts that occur with many widely adopted compression algorithms. Another highly advantageous characteristic of the algorithm is the suppression of noise induced by low-quality sensors usually encountered in web-cameras, due to the manipulation of the transform coefficients at the compression stage. The proposed algorithm is designed to introduce minimal coding delay, thus achieving real-time performance. Performance is enhanced by utilizing the vast computational capabilities of modern GPUs, providing satisfactory encoding and decoding times at relatively low cost. These characteristics make this method suitable for applications like video-conferencing that demand real-time performance, along with the highest visual quality possible for each user. Through the presented performance and quality evaluation of the algorithm, experimental results show that the proposed algorithm achieves better or comparable visual quality relative to other compression and encoding methods tested, while maintaining a satisfactory compression ratio. Especially at low bitrates, it provides more human-eye friendly images compared to algorithms utilizing block-based coding, like the MPEG family, as it introduces fuzziness and blurring instead of artificial block artifacts.

Standards of Conditions During Preparations for the Summer Paralympic Games Between 2004 and 2012 Assessed by Polish Athletes.

PubMed

Sobiecka, Joanna; Gawroński, Wojciech; Kądziołka, Marta; Kruszelnicki, Paweł; Kłodecka-Różalska, Jadwiga; Plinta, Ryszard

2015-11-22

The quality of training conditions affects sporting success, injuries and health. The aim of the work was to present the conditions during the preparations of Polish athletes for the Summer Paralympic Games 2004-2012. The study encompassed 271 paralympians: Athens (91), Beijing (89) and London (91), competing in 13 disciplines. The research was based on a two-part questionnaire by Kłodecka-Różalska adjusted for disabled sports, and was conducted one month before each PG. Part 1 contained 20 closed-ended questions regarding conditions during preparations, while Part 2 concerned socio-demographic and sports-related data. Three levels of conditions: good, satisfactory and poor, were identified. The analysis showed that while the relationships between the athletes were good in all the preparatory periods, the co-operation with the paralympic coaches worsened. The standards of accommodation, food and sports facilities lowered. Personal orthopaedic supply was satisfactory in London; personal sporting equipment was good at all PG. The quality of medical care was the highest in London. The co-operation with physicians, physiotherapists and massage therapists was satisfactory. Consultations with the dietician were sporadic and assessed as poor. Psychological consultations were rare but satisfactory in Beijing and London. Contacts with the mass media were poor at all PG. Although combining private life, work, and education with sport was satisfactory, it was increasingly difficult to manage, particularly before London. The conditions during preparations for the PG 2004-2012 varied. Improvement was noticed only in the quality of medical care and personal orthopaedic supply.

Standards of Conditions During Preparations for the Summer Paralympic Games Between 2004 and 2012 Assessed by Polish Athletes

PubMed Central

Sobiecka, Joanna; Gawroński, Wojciech; Kądziołka, Marta; Kruszelnicki, Paweł; Kłodecka-Różalska, Jadwiga; Plinta, Ryszard

2015-01-01

The quality of training conditions affects sporting success, injuries and health. The aim of the work was to present the conditions during the preparations of Polish athletes for the Summer Paralympic Games 2004–2012. The study encompassed 271 paralympians: Athens (91), Beijing (89) and London (91), competing in 13 disciplines. The research was based on a two-part questionnaire by Kłodecka-Różalska adjusted for disabled sports, and was conducted one month before each PG. Part 1 contained 20 closed-ended questions regarding conditions during preparations, while Part 2 concerned socio-demographic and sports-related data. Three levels of conditions: good, satisfactory and poor, were identified. The analysis showed that while the relationships between the athletes were good in all the preparatory periods, the co-operation with the paralympic coaches worsened. The standards of accommodation, food and sports facilities lowered. Personal orthopaedic supply was satisfactory in London; personal sporting equipment was good at all PG. The quality of medical care was the highest in London. The co-operation with physicians, physiotherapists and massage therapists was satisfactory. Consultations with the dietician were sporadic and assessed as poor. Psychological consultations were rare but satisfactory in Beijing and London. Contacts with the mass media were poor at all PG. Although combining private life, work, and education with sport was satisfactory, it was increasingly difficult to manage, particularly before London. The conditions during preparations for the PG 2004–2012 varied. Improvement was noticed only in the quality of medical care and personal orthopaedic supply. PMID:26834879

Salting-out assisted liquid-liquid extraction coupled to ultra-high performance liquid chromatography-tandem mass spectrometry for the determination of tetracycline residues in infant foods.

PubMed

Moreno-González, David; García-Campaña, Ana M

2017-04-15

The use of salting-out assisted liquid-liquid extraction (SALLE) combined with ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) has been evaluated for the determination of tetracyclines in infant foods based on meat and vegetables or in milk. To obtain satisfactory extraction efficiencies for the studied analytes, several parameters affecting the SALLE procedure were optimized. Analytical performances of the method were satisfactory, obtaining limits of quantification lower than 0.48μgkg -1 in all cases. The precision, expressed as relative standard deviation (%, RSD) was below 11.3%. The extraction efficiency for fortified samples ranged from 89.2 to 96.8%, with RSDs lower than 7.3%. Matrix effect was evaluated for all samples studied, being lower than |21|% in all cases. In relation to the low solvent consumption, the proposed methodology could be considered rapid, cheap and environmentally friendly. Its applicability has been successfully tested in a wide range of infant foods. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Experience of Mitral Valve Replacement Using a Pulmonary Autograft (Ross II Operation) in an Infant;Report of a Case].

PubMed

Kawahito, Tomohisa; Egawa, Yoshiyasu; Yoshida, Homare; Shimoe, Yasushi; Onishi, Tatsuya; Miyagi, Yuhichi; Terada, Kazuya; Ohta, Akira

2015-07-01

A 24-day-old boy suddenly developed progressive heart failure and was transported to our hospital. Echocardiography showed massive mitral regurgitation due to chordal rupture. Mitral valve repair was performed at 28 days of life, but postoperative valvular function was not satisfactory. A mechanical valve was implanted in the supra-annular position at 37 days of life. Two months after valve replacement, the mechanical valve was suddenly stuck. Emergent redo valve replacement was performed, but the prosthetic valve became stuck again 2 months after the 3rd operation, despite sufficient anti-coagulation therapy. At the 4th operation (6 months after birth), we implanted a pulmonary autograft in the mitral position instead of another mechanical valve in an emergent operation. The right ventricular outflow tract was reconstructed with a valved conduit. A postoperative catheter examination, which was performed 1 year after the Ross II operation, showed mild mitral stenosis with no regurgitation. Previous reports of Ross II operations in infants are rare and long-term results are unknown. However, we advocate that this procedure should be a rescue operation for mitral valve dysfunction in the early period of infants.

Cross-cultural application of the Korean version of Ureteral Stent Symptoms Questionnaire.

PubMed

Park, Jinsung; Shin, Dong Wook; You, Changhee; Chung, Kyung Jin; Han, Deok Hyun; Joshi, Hrishi B; Park, Hyung Keun

2012-11-01

We validated the Korean version of the Ureteral Stent Symptoms Questionnaire (USSQ) in patients with an indwelling ureteral stent. Linguistic validation of the original USSQ was performed through a standard process including translation, back translation, and pilot study. A total of 65 patients who underwent ureteroscopic surgery were asked to complete the Korean USSQ as well as EuroQOL (male and female), the International Prostate Symptom Score (male), and Urogenital Distress Inventory-6 (female). Patients were evaluated at weeks 1 and 2 after stent placement and at week 4 after removal. Sixty-four healthy subjects without a ureteral stent were also asked to complete the Korean USSQ once. The psychometric properties of the questionnaire were analyzed. Internal consistencies (Cronbach α coefficients: 0.73-0.83) and test-retest reliability (Spearman correlation coefficient: ≥0.6) were satisfactory for urinary symptom, body pain, general health, and work performance domains. Most USSQ domains showed moderate correlations with each other. Convergent validity determined by correlation between other instruments and corresponding USSQ domain was satisfactory. Sensitivity to change and discriminant validity were also good in most domains (P<0.01). Only a small proportion of the study population had an active sexual life, with the stent in situ, limiting its analysis. The Korean version of the USSQ is a reliable and valid instrument that can be self-administered by Korean patients with a ureteral stent in the clinical and research settings. Further clinical studies in the Korean settings would be useful to provide robust data on sensitivity to change.

Some-or-none recollection: Evidence from item and source memory.

PubMed

Onyper, Serge V; Zhang, Yaofei X; Howard, Marc W

2010-05-01

Dual-process theory hypothesizes that recognition memory depends on 2 distinguishable memory signals. Recollection reflects conscious recovery of detailed information about the learning episode. Familiarity reflects a memory signal that is not accompanied by a vivid conscious experience but nonetheless enables participants to distinguish recently experienced probe items from novel ones. This dual-process explanation of recognition memory has gained wide acceptance among cognitive neuroscientists and some cognitive psychologists. Nonetheless, its difficulty in providing a quantitatively satisfactory description of performance has precluded a consensus not only regarding the theoretical structure of recognition memory but also about how to best measure recognition accuracy. In 2 experiments we show that neither the standard formulation of dual-process signal detection (DPSD) theory nor a widely used single-process model called the unequal-variance signal-detection (UVSD) model provides a satisfactory explanation of recognition memory across different types of stimuli (words and travel scenes). In the variable-recollection dual-process (VRDP) model, recollection fails for some old probe items, as in standard formulations of DPSD, but gives rise to a continuous distribution of memory strengths when it succeeds. The VRDP can approximate both the DPSD and UVSD. In both experiments it provides a consistently superior fit across materials to the superset of the DPSD and UVSD. The VRDP offers a simple explanation of the form of conjoint item-source judgments, something neither the DPSD nor UVSD accomplishes. The success of the VRDP supports the core assumptions of dual-process theory by providing an excellent quantitative description of recognition performance across materials and response criteria.

A rapid and sensitive assay of perfluorocarboxylic acids in aqueous matrices by headspace solid phase microextraction-gas chromatography-triple quadrupole mass spectrometry.

PubMed

Monteleone, Marcello; Naccarato, Attilio; Sindona, Giovanni; Tagarelli, Antonio

2012-08-17

The work aims at developing a rapid and sensitive method for the quantification of perfluorocarboxylic acids in aqueous matrices. The proposed analytical approach is based on the use of solid phase microextraction in headspace mode after a fast derivatization of the carboxylate function by propylchloroformate/propanol mixture. Several fibers were evaluated and the optimization of the parameters affecting the SPME process was carried out using a central composite design. The optimum working conditions in terms of response values were achieved by performing analysis with CAR/PDMS fiber at room temperature, without addition of NaCl, with a sample volume of 6 ml and an extraction time of 10 min. Assay of PFCAs was performed by using a gas chromatography-triple quadrupole mass spectrometry (GC-QqQ MS) system in negative chemical ionization mode with ammonia as reagent gas. An overall evaluation of all analytical parameters shows that the proposed method provides satisfactory results. In particular, the observed accuracies, ranging from 84.4% to 116.8%, and the RSD values in the range 0.4% and 14.5% confirm the effectiveness of the developed protocol in the assay of PFCAs content in aqueous matrices. Moreover, LOD and LOQ values ranging from 0.08 to 6.6 ng l(-1) and from 0.17 to 14.3 ng l(-1), respectively, can be considered very satisfactory. None of the compounds were detected in six samples of river collected in Calabria. Copyright © 2012 Elsevier B.V. All rights reserved.

Evaluating Multi-Input/Multi-Output Digital Control Systems

NASA Technical Reports Server (NTRS)

Pototzky, Anthony S.; Wieseman, Carol D.; Hoadley, Sherwood T.; Mukhopadhyay, Vivek

1994-01-01

Controller-performance-evaluation (CPE) methodology for multi-input/multi-output (MIMO) digital control systems developed. Procedures identify potentially destabilizing controllers and confirm satisfactory performance of stabilizing ones. Methodology generic and used in many types of multi-loop digital-controller applications, including digital flight-control systems, digitally controlled spacecraft structures, and actively controlled wind-tunnel models. Also applicable to other complex, highly dynamic digital controllers, such as those in high-performance robot systems.

Surgical management of post-traumatic atlantoaxial rotatory fixation due to C2 facet fracture: 5 clinical cases.

PubMed

Peyriere, H; Graillon, T; Pesenti, S; Tropiano, P; Blondel, B; Fuentes, S

2017-02-01

Report the results of surgical treatment of post-traumatic atlantoaxial rotatory fixation (AARF) due to C2 articular facet fracture in adults. The records of five patients treated since 2009 for AARF due to a C2 articular facet fracture were analyzed retrospectively. Three women and two men with an average age of 60 years (27-82) were included, one of whom initially had neurological deficits. In all cases, the surgical strategy consisted of posterior fixation: Harms-type in four cases and trans-articular with hooks in one case. Dislocations due to fracture of the C2 articular facet are rare in adults; various treatment strategies have been described. In our experience, posterior screw fixation leads to satisfactory clinical and radiological outcomes. Fusion is not necessary in these cases because the dislocation is related to an asymmetric fracture without ligament damage. Posterior fixation provides satisfactory reduction of these injuries and leads to satisfactory bone union. This surgical treatment can be performed early on after the trauma and is an interesting alternative to conservative treatment. Copyright © 2016. Published by Elsevier Masson SAS.

Multi-criteria decision making development of ion chromatographic method for determination of inorganic anions in oilfield waters based on artificial neural networks retention model.

PubMed

Stefanović, Stefica Cerjan; Bolanča, Tomislav; Luša, Melita; Ukić, Sime; Rogošić, Marko

2012-02-24

This paper describes the development of ad hoc methodology for determination of inorganic anions in oilfield water, since their composition often significantly differs from the average (concentration of components and/or matrix). Therefore, fast and reliable method development has to be performed in order to ensure the monitoring of desired properties under new conditions. The method development was based on computer assisted multi-criteria decision making strategy. The used criteria were: maximal value of objective functions used, maximal robustness of the separation method, minimal analysis time, and maximal retention distance between two nearest components. Artificial neural networks were used for modeling of anion retention. The reliability of developed method was extensively tested by the validation of performance characteristics. Based on validation results, the developed method shows satisfactory performance characteristics, proving the successful application of computer assisted methodology in the described case study. Copyright © 2011 Elsevier B.V. All rights reserved.

Analytical design of modified Smith predictor for unstable second-order processes with time delay

NASA Astrophysics Data System (ADS)

Ajmeri, Moina; Ali, Ahmad

2017-06-01

In this paper, a modified Smith predictor using three controllers, namely, stabilising (Gc), set-point tracking (Gc1), and load disturbance rejection (Gc2) controllers is proposed for second-order unstable processes with time delay. Controllers of the proposed structure are tuned using direct synthesis approach as this method enables the user to achieve a trade-off between the performance and robustness by adjusting a single design parameter. Furthermore, suitable values of the tuning parameters are recommended after studying their effect on the closed-loop performance and robustness. This is the main advantage of the proposed work over other recently published manuscripts, where authors provide only suitable ranges for the tuning parameters in spite of giving their suitable values. Simulation studies show that the proposed method results in satisfactory performance and improved robustness as compared to the recently reported control schemes. It is observed that the proposed scheme is able to work in the noisy environment also.

Altitude-Test-Chamber Investigation of the Endurance and Performance Characteristics of the J65-W-7 Engine at a Mach Number of 2.0

NASA Technical Reports Server (NTRS)

Biermann, A.E.; Braithwaite, Willis M.

1955-01-01

An investigation of the endurance characteristics, at high Mach number, of the J65-W-7 engine was made in an altitude chamber at the Lewis laboratory. The investigation was made to determine whether this engine can be operated at flight conditions of Mach 2 at 35,000-feet altitude (inlet temperature, 250 F) as a limited-service-life engine Failure of the seventh-stage aluminum compressor blades occurred in both engines tested and was attributed to insufficient strength of the blade fastenings at the elevated temperatures. For the conditions of these tests, the results showed that it is reasonable to expect 10 to 15 minutes of satisfactory engine operation before failure. The high temperatures and pressures imposed upon the compressor housing caused no permanent deformation. In general, the performance of the engines tested was only slightly affected by the high ram conditions of this investigation. There was no discernible depreciation of performance with time prior to failure.

Robust Multivariable Estimation of the Relevant Information Coming from a Wheel Speed Sensor and an Accelerometer Embedded in a Car under Performance Tests

PubMed Central

Hernandez, Wilmar

2005-01-01

In the present paper, in order to estimate the response of both a wheel speed sensor and an accelerometer placed in a car under performance tests, robust and optimal multivariable estimation techniques are used. In this case, the disturbances and noises corrupting the relevant information coming from the sensors' outputs are so dangerous that their negative influence on the electrical systems impoverish the general performance of the car. In short, the solution to this problem is a safety related problem that deserves our full attention. Therefore, in order to diminish the negative effects of the disturbances and noises on the car's electrical and electromechanical systems, an optimum observer is used. The experimental results show a satisfactory improvement in the signal-to-noise ratio of the relevant signals and demonstrate the importance of the fusion of several intelligent sensor design techniques when designing the intelligent sensors that today's cars need.

Comparison of the imaging performances for recently developed monolithic scintillators: CRY018 and CRY019 for dual isotope gamma ray imaging applications

NASA Astrophysics Data System (ADS)

Polito, C.; Pani, R.; Trigila, C.; Cinti, M. N.; Fabbri, A.; Frantellizzi, V.; De Vincentis, G.; Pellegrini, R.; Pani, R.

2017-01-01

The growing interest for new scintillation crystals with outstanding imaging performances (i.e. resolution and efficiency) has suggested the study of recently discovered scintillators named CRY018 and CRY019. The crystals under investigation are monolithic and have shown enhanced characteristics both for gamma ray spectrometry and for Nuclear Medicine imaging applications such as the dual isotope imaging. Moreover, the non-hygroscopic nature and the absence of afterglow make these scintillators even more attractive for the potential improvement in a wide range of applications. These scintillation crystals show a high energy resolution in the energy range involved in Nuclear Medicine, allowing the discrimination between very close energy values. Moreover, in order to prove their suitability of being powerful imaging systems, the imaging performances like the position linearity and the intrinsic spatial resolution have been evaluated obtaining satisfactory results thanks to the implementation of an optimized algorithm for the images reconstruction.

Wind tunnel research comparing lateral control devices, particularly at high angles of attack X : various control devices on a wing with a fixed auxiliary airfoil

NASA Technical Reports Server (NTRS)

Weick, Fred E; Noyes, Richard W

1933-01-01

Results are given of a series of systemic tests comparing lateral control devices with particular reference to their effectiveness at high angles of attack. These tests were made with two sizes of ordinary ailerons and different sizes of spoilers on a Clark Y wing model having a narrow auxiliary airfoil fixed ahead and above the leading edge, the chords of the main and auxiliary airfoils being parallel. In addition, the auxiliary airfoil itself was given angular deflection. The purpose was to provide rolling moments for lateral control. The tests were made in a 7 by 10 foot wind tunnel. They included both force and rotation tests to show the effect of the devices on the lift and drag characteristics of the wing and on the lateral stability characteristics, as well as lateral control. They showed that none of the aileron arrangements tried would give rolling control of an assumed satisfactory value at all angles of attack up to the stall. However, they would give satisfactory values, but at the expense of abnormally high deflections and very heavy hinge moments. The most effective combination of ailerons and spoilers gave satisfactory values of rolling moment at angles of attack below the stall, and the values did not fall off as rapidly above the stall as with ailerons alone. With an arrangement of this type having the proper relative proportions and linkage, it should be possible to obtain reasonably satisfactory yawing moments and control forces. Deflecting one-half of the auxiliary airfoil downward for the purpose of control gave strong favorable yawing moments at all angles of attack, but gave very small rolling moments at the low angles of attack.

RNA inverse folding using Monte Carlo tree search.

PubMed

Yang, Xiufeng; Yoshizoe, Kazuki; Taneda, Akito; Tsuda, Koji

2017-11-06

Artificially synthesized RNA molecules provide important ways for creating a variety of novel functional molecules. State-of-the-art RNA inverse folding algorithms can design simple and short RNA sequences of specific GC content, that fold into the target RNA structure. However, their performance is not satisfactory in complicated cases. We present a new inverse folding algorithm called MCTS-RNA, which uses Monte Carlo tree search (MCTS), a technique that has shown exceptional performance in Computer Go recently, to represent and discover the essential part of the sequence space. To obtain high accuracy, initial sequences generated by MCTS are further improved by a series of local updates. Our algorithm has an ability to control the GC content precisely and can deal with pseudoknot structures. Using common benchmark datasets for evaluation, MCTS-RNA showed a lot of promise as a standard method of RNA inverse folding. MCTS-RNA is available at https://github.com/tsudalab/MCTS-RNA .

Development of highly sensitive amperometric biosensor for glucose using carbon nanosphere/sodium alginate composite matrix for enzyme immobilization.

PubMed

Han, En; Li, Xia; Cai, Jian-Rong; Cui, Hai-Ying; Zhang, Xing-Ai

2014-01-01

In this study, we developed a highly sensitive amperometric biosensor for glucose detection based on glucose oxidase immobilized in a novel carbon nanosphere (CNS)/sodium alginate (SA) composite matrix. This hybrid material combined the advantages of CNS and natural biopolymer SA. This composite film was characterized by scanning electron microscope, electrochemical impedance spectroscopy and UV-vis, which indicated that the hybrid material was suitable for immobilization of glucose oxidase. Various experimental conditions were investigated that influenced the performance of the biosensor, such as pH, applied potential and temperature. Under the optimum conditions, the biosensor showed excellent performance for glucose over a wide linear concentration range from 1.0 × 10(-6) to 4.6 × 10(-3) M with a detection limit of 0.5 μM based on a signal-to-noise ratio of 3. Furthermore, the biosensor exhibited excellent long-term stability and satisfactory reproducibility.

A potential drop strain sensor for in-situ power station creep monitoring

NASA Astrophysics Data System (ADS)

Corcoran, Joseph; Cawley, Peter; Nagy, Peter B.

2014-02-01

Creep is a high temperature damage mechanism of interest to the power industry and at present lacks a satisfactory inspection technique. Existing material inspection techniques are extremely laborious while strain measurements rely on often infrequent off-load measurements. A quasi-DC directional potential drop technique has been suggested that is able to suppress the effects of permeability and is primarily sensitive to changes in resistivity and also the geometry that will develop through strain. The change in creep related resistivity is shown by an equivalent effective resistivity approach to be small at <2% change when compared to the >100% change in transfer resistance that occurs due to strain as observed in laboratory tests. A biaxial inversion is then presented and demonstrated on in-lab samples showing good performance. The result is a sensor that performs as a very robust high temperature strain gauge.

IASI instrument onboard Metop-A: lessons learned after almost two years in orbit

NASA Astrophysics Data System (ADS)

Buffet, Laurence; Pequignot, Eric; Blumstein, Denis; Fjørtoft, Roger; Lonjou, Vincent; Millet, Bruno; Larigauderie, Carole

2017-11-01

The Infrared Atmospheric Sounding Interferometer (IASI) is a key element of the MetOp payload, dedicated to operational meteorology. IASI measurements allow to retrieve temperature and humidity profiles at a 1 km vertical resolution with an accuracy of respectively 1 K and 10%. The aim of this paper is to give a status of the instrument and to present some lessons learned after almost two years in orbit. As the first European infrared sounder, the IASI instrument has demonstrated its operational capability and its adequacy to user needs, with highly meaningful contributions to meteorology, climate and atmospheric chemistry studies. The in-flight performance of IASI is fully satisfactory. The sensitivity to radiative environment seems to be higher than expected: several SEU related anomalies were recorded, without any consequence on the instrument's health. The first decontamination since the commissioning phase was successfully performed in March 2008. The instrument globally shows a stable behaviour.

The effect of porous lead iodide precursor film on perovskite film formation and its photovoltaic property after an effective pretreatment

NASA Astrophysics Data System (ADS)

Yan, Jian-Jun; Li, Yan; Chang, Yin; Jiang, Pan; Wang, Cheng-Wei

2016-06-01

An effective solvent sealed natural drying (SND) pretreatment was introduced for forming a satisfactory crystalline porous iodide (PbI2) precursor film, which could help to generate excellent CH3NH3PbI3 perovskite films for high performance of planar heterojunction perovskite solar cells. And the influence of SND pretreated time on the device performance was investigated in detail. We found that the PbI2 precursor film after 10 min pretreatment could make the perovskite device achieve the optimal power conversion efficiency (PCE) of 8.6%, significantly increased up to 95.5% and 28.4% compared to without pretreatment or traditional treatment. The results show that the time of SND pretreatment is critical to forming large grain size and good crystallinity for PbI2 precursor film, which would markedly improve the efficiency of planar heterojunction perovskite solar cells.

Direct model reference adaptive control of robotic arms

NASA Technical Reports Server (NTRS)

Kaufman, Howard; Swift, David C.; Cummings, Steven T.; Shankey, Jeffrey R.

1993-01-01

The results of controlling A PUMA 560 Robotic Manipulator and the NASA shuttle Remote Manipulator System (RMS) using a Command Generator Tracker (CGT) based Model Reference Adaptive Controller (DMRAC) are presented. Initially, the DMRAC algorithm was run in simulation using a detailed dynamic model of the PUMA 560. The algorithm was tuned on the simulation and then used to control the manipulator using minimum jerk trajectories as the desired reference inputs. The ability to track a trajectory in the presence of load changes was also investigated in the simulation. Satisfactory performance was achieved in both simulation and on the actual robot. The obtained responses showed that the algorithm was robust in the presence of sudden load changes. Because these results indicate that the DMRAC algorithm can indeed be successfully applied to the control of robotic manipulators, additional testing was performed to validate the applicability of DMRAC to simulated dynamics of the shuttle RMS.

Adaptive UAV Attitude Estimation Employing Unscented Kalman Filter, FOAM and Low-Cost MEMS Sensors

PubMed Central

de Marina, Héctor García; Espinosa, Felipe; Santos, Carlos

2012-01-01

Navigation employing low cost MicroElectroMechanical Systems (MEMS) sensors in Unmanned Aerial Vehicles (UAVs) is an uprising challenge. One important part of this navigation is the right estimation of the attitude angles. Most of the existent algorithms handle the sensor readings in a fixed way, leading to large errors in different mission stages like take-off aerobatic maneuvers. This paper presents an adaptive method to estimate these angles using off-the-shelf components. This paper introduces an Attitude Heading Reference System (AHRS) based on the Unscented Kalman Filter (UKF) using the Fast Optimal Attitude Matrix (FOAM) algorithm as the observation model. The performance of the method is assessed through simulations. Moreover, field experiments are presented using a real fixed-wing UAV. The proposed low cost solution, implemented in a microcontroller, shows a satisfactory real time performance. PMID:23012559

Removal of Manganese from Solution using Polyamide Membrane

NASA Astrophysics Data System (ADS)

Mathaba, M.; Sithole, N.; Mashifana, T.

2018-03-01

The work demonstrates the performance of polyamide membrane in the removal of manganese ions from single salt aqueous solution simulating real acid mine drainage. The membrane was tested using a dead-end filtration cell with manganese sulphate was used to prepare a feed solution. The membrane flux and metal rejection was evaluated. Effect of operating parameters such as pH, initial feed concentration and pressure on membrane performance was investigated. The pressure was varied between 10 and 15 bar and it was observed that increasing the pressure increases the membrane flux. Acidic pH conditions contributed to the removal of the contaminate as Mn2+ ions are freely at low pH. The percentage rejection was found to be 63.5 to 77.6 % as concentration is increased from 290 ppm to 321 ppm for a feed solution. The membrane showed satisfactory results in removing metal ions from solution.

Intelligent vision guide for automatic ventilation grommet insertion into the tympanic membrane.

PubMed

Gao, Wenchao; Tan, Kok Kiong; Liang, Wenyu; Gan, Chee Wee; Lim, Hsueh Yee

2016-03-01

Otitis media with effusion is a worldwide ear disease. The current treatment is to surgically insert a ventilation grommet into the tympanic membrane. A robotic device allowing automatic grommet insertion has been designed in a previous study; however, the part of the membrane where the malleus bone is attached to the inner surface is to be avoided during the insertion process. This paper proposes a synergy of optical flow technique and a gradient vector flow active contours algorithm to achieve an online tracking of the malleus under endoscopic vision, to guide the working channel to move efficiently during the surgery. The proposed method shows a more stable and accurate tracking performance than the current tracking methods in preclinical tests. With satisfactory tracking results, vision guidance of a suitable insertion spot can be provided to the device to perform the surgery in an automatic way. Copyright © 2015 John Wiley & Sons, Ltd.

An improved SRC method based on virtual samples for face recognition

NASA Astrophysics Data System (ADS)

Fu, Lijun; Chen, Deyun; Lin, Kezheng; Li, Ao

2018-07-01

The sparse representation classifier (SRC) performs classification by evaluating which class leads to the minimum representation error. However, in real world, the number of available training samples is limited due to noise interference, training samples cannot accurately represent the test sample linearly. Therefore, in this paper, we first produce virtual samples by exploiting original training samples at the aim of increasing the number of training samples. Then, we take the intra-class difference as data representation of partial noise, and utilize the intra-class differences and training samples simultaneously to represent the test sample in a linear way according to the theory of SRC algorithm. Using weighted score level fusion, the respective representation scores of the virtual samples and the original training samples are fused together to obtain the final classification results. The experimental results on multiple face databases show that our proposed method has a very satisfactory classification performance.

Nonlinear Adaptive PID Control for Greenhouse Environment Based on RBF Network

PubMed Central

Zeng, Songwei; Hu, Haigen; Xu, Lihong; Li, Guanghui

2012-01-01

This paper presents a hybrid control strategy, combining Radial Basis Function (RBF) network with conventional proportional, integral, and derivative (PID) controllers, for the greenhouse climate control. A model of nonlinear conservation laws of enthalpy and matter between numerous system variables affecting the greenhouse climate is formulated. RBF network is used to tune and identify all PID gain parameters online and adaptively. The presented Neuro-PID control scheme is validated through simulations of set-point tracking and disturbance rejection. We compare the proposed adaptive online tuning method with the offline tuning scheme that employs Genetic Algorithm (GA) to search the optimal gain parameters. The results show that the proposed strategy has good adaptability, strong robustness and real-time performance while achieving satisfactory control performance for the complex and nonlinear greenhouse climate control system, and it may provide a valuable reference to formulate environmental control strategies for actual application in greenhouse production. PMID:22778587

Short version of the "instrument for assessment of stress in nursing students" in the Brazilian reality.

PubMed

Costa, Ana Lúcia Siqueira; Silva, Rodrigo Marques da; Mussi, Fernanda Carneiro; Serrano, Patrícia Maria; Graziano, Eliane da Silva; Batista, Karla de Melo

2018-01-08

validate a short version of the Instrument for assessment of stress in nursing students in the Brazilian reality. Methodological study conducted with 1047 nursing students from five Brazilian institutions, who answered the 30 items initially distributed in eight domains. Data were analyzed in the R Statistical Package and in the latent variable analysis, using exploratory and confirmatory factor analyses, Cronbach's alpha and item-total correlation. The short version of the instrument had 19 items distributed into four domains: Environment, Professional Training, Theoretical Activities and Performance of Practical Activities. The confirmatory analysis showed absolute and parsimony fit to the proposed model with satisfactory residual levels. Alpha values ​​per factor ranged from 0.736 (Environment) to 0.842 (Performance of Practical Activities). The short version of the instrument has construct validity and reliability for application to Brazilian nursing undergraduates at any stage of the course.

Simple agrometeorological models for estimating Guineagrass yield in Southeast Brazil.

PubMed

Pezzopane, José Ricardo Macedo; da Cruz, Pedro Gomes; Santos, Patricia Menezes; Bosi, Cristiam; de Araujo, Leandro Coelho

2014-09-01

The objective of this work was to develop and evaluate agrometeorological models to simulate the production of Guineagrass. For this purpose, we used forage yield from 54 growing periods between December 2004-January 2007 and April 2010-March 2012 in irrigated and non-irrigated pastures in São Carlos, São Paulo state, Brazil (latitude 21°57'42″ S, longitude 47°50'28″ W and altitude 860 m). Initially we performed linear regressions between the agrometeorological variables and the average dry matter accumulation rate for irrigated conditions. Then we determined the effect of soil water availability on the relative forage yield considering irrigated and non-irrigated pastures, by means of segmented linear regression among water balance and relative production variables (dry matter accumulation rates with and without irrigation). The models generated were evaluated with independent data related to 21 growing periods without irrigation in the same location, from eight growing periods in 2000 and 13 growing periods between December 2004-January 2007 and April 2010-March 2012. The results obtained show the satisfactory predictive capacity of the agrometeorological models under irrigated conditions based on univariate regression (mean temperature, minimum temperature and potential evapotranspiration or degreedays) or multivariate regression. The response of irrigation on production was well correlated with the climatological water balance variables (ratio between actual and potential evapotranspiration or between actual and maximum soil water storage). The models that performed best for estimating Guineagrass yield without irrigation were based on minimum temperature corrected by relative soil water storage, determined by the ratio between the actual soil water storage and the soil water holding capacity.irrigation in the same location, in 2000, 2010 and 2011. The results obtained show the satisfactory predictive capacity of the agrometeorological models under irrigated conditions based on univariate regression (mean temperature, potential evapotranspiration or degree-days) or multivariate regression. The response of irrigation on production was well correlated with the climatological water balance variables (ratio between actual and potential evapotranspiration or between actual and maximum soil water storage). The models that performed best for estimating Guineagrass yield without irrigation were based on degree-days corrected by the water deficit factor.

Spanish version of the Time Management Behavior Questionnaire for university students.

PubMed

García-Ros, Rafael; Pérez-González, Francisco

2012-11-01

The main objective of the study is to analyze the psychometric properties and predictive capacity on academic performance in university contexts of a Spanish adaptation of the Time Management Behavior Questionnaire. The scale was applied to 462 students newly admitted at the Universitat de València in the 2006-2007 school year. The analyses performed made it possible to reproduce the factorial structure of the original version of the questionnaire with slight modifications in the ascription of various items. The underlying factorial structure includes four interrelated dimensions (Establishing objectives and priorities, Time management tools, Perception of time control and Preference for disorganization), which present satisfactory levels of reliability and an adequate convergent validity with the Time management subscale of the Motivated Strategies for Learning Questionnaire. The scores on the dimensions of time management show significant levels of association with academic performance in the first year of university studies, especially highlighting the predictive capacity of the subscale dealing with the Establishment of objectives and priorities. These results show the reliability and validity of this adaptation of the scale for evaluating how the students manage their academic time, and predicting their performance in the year they initiate the degree program, thus aiding in the development of intervention proposals directed towards improving these skills.

38 CFR 21.6362 - Satisfactory conduct and cooperation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Satisfactory conduct and cooperation. 21.6362 Section 21.6362 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS... Pension Recipients Satisfactory Conduct and Cooperation § 21.6362 Satisfactory conduct and cooperation...

Mechanization of and experience with a triplex fly-by-wire backup control system

NASA Technical Reports Server (NTRS)

Lock, W. P.; Petersen, W. R.; Whitman, G. B.

1975-01-01

A redundant three-axis analog control system was designed and developed to back up a digital fly-by-wire control system for an F-8C airplane. Forty-two flights, involving 58 hours of flight time, were flown by six pilots. The mechanization and operational experience with the backup control system, the problems involved in synchronizing it with the primary system, and the reliability of the system are discussed. The backup control system was dissimilar to the primary system, and it provided satisfactory handling through the flight envelope evaluated. Limited flight tests of a variety of control tasks showed that control was also satisfactory when the backup control system was controlled by a minimum-displacement (force) side stick. The operational reliability of the F-8 digital fly-by-wire control system was satisfactory, with no unintentional downmodes to the backup control system in flight. The ground and flight reliability of the system's components is discussed.

5 CFR 532.417 - Within-grade increases.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 532.417 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Pay Administration § 532.417 Within-grade increases. (a) An employee paid under a regular Federal Wage System schedule with a work performance rating of satisfactory or better shall advance...

5 CFR 532.417 - Within-grade increases.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 532.417 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Pay Administration § 532.417 Within-grade increases. (a) An employee paid under a regular Federal Wage System schedule with a work performance rating of satisfactory or better shall advance...

5 CFR 532.417 - Within-grade increases.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 532.417 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Pay Administration § 532.417 Within-grade increases. (a) An employee paid under a regular Federal Wage System schedule with a work performance rating of satisfactory or better shall advance...

43 CFR 3195.30 - How do I apply to become a Federal helium supplier?

Code of Federal Regulations, 2011 CFR

2011-10-01

... Federal helium buyers; and (3) A satisfactory record of performance in the distribution of helium or other compressed gases. (b) You must fill out and execute BLM's In-Kind Crude Helium Sales Contract and submit it...

0-6716 : design parameters and methodology for mechanically stabilized earth (MSE) walls.

DOT National Transportation Integrated Search

2013-08-01

Since their appearance in the 1970s, mechanically : stabilized earth (MSE) walls have become a majority : among all types of retaining walls due to their economics : and satisfactory performance. The Texas Department of : Transportation (TxDOT) has p...

Whole body MRI, including diffusion-weighted imaging in follow-up of patients with testicular cancer.

PubMed

Mosavi, Firas; Laurell, Anna; Ahlström, Håkan

2015-11-01

Whole body (WB) magnetic resonance imaging (MRI), including diffusion-weighted imaging (DWI) has become increasingly utilized in cancer imaging, yet the clinical utility of these techniques in follow-up of testicular cancer patients has not been evaluated. The purpose of this study was to evaluate the feasibility of WB MRI with continuous table movement (CTM) technique, including multistep DWI in follow-up of patients with testicular cancer. WB MRI including DWI was performed in follow-up of 71 consecutive patients (median age, 37 years; range 19-84) with histologically confirmed testicular cancer. WB MRI protocol included axial T1-Dixon and T2-BLADE sequences using CTM technique. Furthermore, multi-step DWI was performed using b-value 50 and 1000 s/mm(2). One criterion for feasibility was patient tolerance and satisfactory image quality. Another criterion was the accuracy in detection of any pathological mass, compared to standard of reference. Signal intensity in DWI was used for evaluation of residual mass activity. Clinical, laboratory and imaging follow-up were applied as standard of reference for the evaluation of WB MRI. WB MRI was tolerated in nearly all patients (69/71 patients, 97%) and the image quality was satisfactory. Metal artifacts deteriorated the image quality in six patients, but it did not influence the overall results. No case of clinical relapse was observed during the follow-up time. There was a good agreement between conventional WB MRI and standard of reference in all patients. Three patients showed residual masses and DWI signal was not restricted in these patients. Furthermore, DWI showed abnormally high signal intensity in a normal-sized retroperitoneal lymph node indicating metastasis. The subsequent (18)F-FDG PET/CT could verify the finding. WB MRI with CTM technique including multi-step DWI is feasible in follow-up of patients with testicular cancer. DWI may contribute to important added-value data to conventional MRI sequences regarding the activity of residual masses.

Validation of the Kohnen Restless Legs Syndrome-Quality of Life instrument.

PubMed

Kohnen, Ralf; Martinez-Martin, Pablo; Benes, Heike; Trenkwalder, Claudia; Högl, Birgit; Dunkl, Elmar; Walters, Arthur S

2016-08-01

Due to the symptoms and the sleep disturbances it causes, Restless Legs Syndrome (RLS) has a negative impact on quality of life. Measurement of such impact can be performed by means of questionnaires, such as the Kohnen Restless Legs Syndrome-Quality of Life questionnaire (KRLS-QoL), a specific 12-item instrument that is self-applied by patients. The present study is aimed at performing a first formal validation study of this instrument. Eight hundred ninety-one patients were included for analysis. RLS severity was assessed by the International Restless Legs Scale (IRLS), Restless Legs Syndrome-6 scales (RLS-6), and Clinical Global Impression of Severity. In addition the Epworth Sleepiness Scale (ESS) was assessed. Acceptability, dimensionality, scaling assumptions, reliability, precision, hypotheses-related validity, and responsiveness were tested. There were missing data in 3.58% patients. Floor and ceiling effects were low for the subscales, global evaluation, and summary index derived from items 1 to 11 after checking that scaling assumptions were met. Exploratory parallel factor analysis showed that the KRLS-QoL may be deemed unidimensional, ie, that all components of the scale are part of one overall general quality of life factor. Indexes of internal consistency (alpha = 0.88), item-total correlation (r S  = 0.32-0.71), item homogeneity coefficient (0.41), and scale stability (ICC = 0.73) demonstrated a satisfactory reliability of the KRLS-QoL. Moderate or high correlations were obtained between KRLS-QoL scores and the IRLS, some components of the RLS-6, inter-KRLS-QoL domains, and global evaluations. Known-groups validity for severity levels grouping and responsiveness analysis results were satisfactory, the latter showing higher magnitudes of response for treated than for placebo arms. The KRLS-QoL was proven an acceptable, reliable, valid, and responsive measure to assess the impact of the RLS on quality of life. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

42 CFR 456.654 - Requirements for content of showings and procedures for submittal.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Requirements for content of showings and procedures for submittal. 456.654 Section 456.654 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Penalty for Failure To Make a Satisfactory Showing of...

42 CFR 456.654 - Requirements for content of showings and procedures for submittal.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false Requirements for content of showings and procedures for submittal. 456.654 Section 456.654 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Penalty for Failure To Make a Satisfactory Showing of...

Flight motor set 360L001 (STS-26R). Volume 1: System overview, revision A

NASA Technical Reports Server (NTRS)

Garecht, Diane M.

1990-01-01

The NASA space shuttle flight STS-26R, launched at 11:37.00.009 am, EDT on 29 Sep. 1988, used the redesigned solid rocket motors (RSRM) 360L001A and 360L001B. Evaluation of the ground environment instrumentation (GEI) data recorded prior to flight showed no launch commit criteria violations; that the field joint heater and aft skirt thermal conditioning systems performed adequately; and that the GEI data showed good agreement with thermal model predictions. Evaluation of the developmental flight instrumentation (DFI) revealed excellent agreement with both the predicted and required ballistic specifications. All parameters were well within the GEI specification requirements including propellant burn rates, specific impulse values, and thrust imbalance. Recorded strain values also indicated satisfactory radial growth and stress levels, as well as verification of adequate safety factors. Postflight inspection of the insulation, seals, case, and nozzles showed overall excellent performance. Some thermal DFI protective cork was missing, and inoperative field joint vent valves on the thermal protection cork allowed water entry into the field joints upon splashdown. Evaluation of these anomalies, as well as complete evaluation of all Redesigned Solid Rocket Motor components, is contained.

Flight motor set 360L001 (STS-26R), volume 1

NASA Technical Reports Server (NTRS)

Ricks, Glen A.

1988-01-01

The NASA space shuttle flight STS-26R, launched at 11:37.00.009 a.m. EDT on 29 Sep. 1988, used the redesigned solid rocket motors (RSRM) 360LOO1A and 360LOO1B. Evaluation of the ground environment instrumentation (GEI) data recorded prior to flight showed: (1) no launch commit criteria violations, (2) that the field joint heater and aft skirt thermal conditioning systems performed adequately, and (3) that the GEI data showed good agreement with thermal model predictions. Evaluation of the developmental flight instrumentation (DFI) revealed excellent agreement with both the predicted and required ballistic specifications. All parameters were well within the CEI specification requirements including propellant burn rates, specific impulse values, and thrust imbalance. Recorded strain values also indicated satisfactory radial growth and stress levels, as well as verification of adequate safety factors. Postflight inspection of the insulation, seals, case, and nozzles showed overall excellent performance. Some thermal DFI protective cork was missing, and inoperative field joint vent valves on the thermal protection cork allowed water entry into the field joints upon splashdown. Evaluation of these anomalies, as well as complete evaluation of all RSRM components, is presented.

16 CFR 1105.3 - A more satisfactory standard.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false A more satisfactory standard. 1105.3 Section 1105.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS... satisfactory standard. In considering whether a contribution is likely to result in a more satisfactory...

38 CFR 21.362 - Satisfactory conduct and cooperation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Satisfactory conduct and.... Chapter 31 Conduct and Cooperation § 21.362 Satisfactory conduct and cooperation. (a) General. The... satisfactory conduct and cooperation in developing and implementing a program of rehabilitation services under...

34 CFR 668.34 - Satisfactory progress.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false Satisfactory progress. 668.34 Section 668.34 Education..., DEPARTMENT OF EDUCATION STUDENT ASSISTANCE GENERAL PROVISIONS Student Eligibility § 668.34 Satisfactory... requirements contained in § 668.32(f), the student must be making satisfactory under the provisions of...

Biodetection grinder

NASA Technical Reports Server (NTRS)

Shaia, C. D.; Jones, G. H.

1971-01-01

Work on a biodetection grinder is summarized. It includes development of the prototype grinder, second generation grinder, and the production version of the grinder. Tests showed the particle size distribution was satisfactory and biological evaluation confirmed the tests.

49 CFR 355.25 - Adopting and enforcing compatible laws and regulations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... will initiate a rulemaking proceeding under part 389 of this subchapter to declare the incompatible... proceeding under part 389. Waivers shall be granted only upon a satisfactory showing that continued...

49 CFR 355.25 - Adopting and enforcing compatible laws and regulations.

Code of Federal Regulations, 2011 CFR

2011-10-01

... will initiate a rulemaking proceeding under part 389 of this subchapter to declare the incompatible... proceeding under part 389. Waivers shall be granted only upon a satisfactory showing that continued...

Factors influencing students' performance in a Brazilian dental school.

PubMed

Silva, Erica Tatiane da; Nunes, Maria de Fátima; Queiroz, Maria Goretti; Leles, Cláudio R

2010-01-01

Comprehensive assessment of students' academic performance plays an important role in educational planning. The aim of this study was to investigate variables that influence student's performance in a retrospective sample including all undergraduate students who entered in a Brazilian dental school, in a 20-year period between 1984 and 2003 (n=1182). Demographic and educational variables were used to predict performance in the overall curriculum and course groups. Cluster analysis (K-means algorithm) categorized students into groups of higher, moderate or lower performance. Clusters of overall performance showed external validity, demonstrated by Chi-square test and ANOVA. Lower performance groups had the smallest number of students in overall performance and course groups clusters, ranging from 11.8% (clinical courses) to 19.2% (basic courses). Students' performance was more satisfactory in dental and clinical courses, rather than basic and non-clinical courses (p<0.001). Better student's performance was predicted by lower time elapsed between completion of high school and dental school admission, female gender, better rank in admission test, class attendance rate and student workload hours in teaching, research and extension (R(2)=0.491). Findings give evidence about predictors of undergraduate students' performance and reinforce the need for curricular reformulation focused on with improvement of integration among courses.

A Comparison of Mindray BC-6800, Sysmex XN-2000, and Beckman Coulter LH750 Automated Hematology Analyzers: A Pediatric Study.

PubMed

Ciepiela, Olga; Kotuła, Iwona; Kierat, Szymon; Sieczkowska, Sandra; Podsiadłowska, Anna; Jenczelewska, Anna; Księżarczyk, Karolina; Demkow, Urszula

2016-11-01

Modern automated laboratory hematology analyzers allow the measurement of over 30 different hematological parameters useful in the diagnostic and clinical interpretation of patient symptoms. They use different methods to measure the same parameters. Thus, a comparison of complete blood count made by Mindray BC-6800, Sysmex XN-2000 and Beckman Coulter LH750 was performed. A comparison of results obtained by automated analysis of 807 anticoagulated blood samples from children and 125 manual microscopic differentiations were performed. This comparative study included white blood cell count, red blood cell count, and erythrocyte indices, as well as platelet count. The present study showed a poor level of agreement between white blood cell enumeration and differentiation of the three automated hematology analyzers under comparison. A very good agreement was found when comparing manual blood smear and automated granulocytes, monocytes, and lymphocytes differentiation. Red blood cell evaluation showed better agreement than white blood cells between the studied analyzers. To conclude, studied instruments did not ensure satisfactory interchangeability and did not facilitate a substitution of one analyzer by another. © 2016 Wiley Periodicals, Inc.

Facile and sensitive determination of N-nitrosamines in food samples by high-performance liquid chromatography via combining fluorescent labeling with dispersive liquid-liquid microextraction.

PubMed

Lu, Shuaimin; Wu, Di; Li, Guoliang; Lv, Zhengxian; Gong, Peiwei; Xia, Lian; Sun, Zhiwei; Chen, Guang; Chen, Xuefeng; You, Jinmao; Wu, Yongning

2017-11-01

The intake of N-nitrosamines (NAs) from foodstuffs is considered to be an important influence factor for several cancers. But the rapid and sensitive screening of NAs remains a challenge in the field of food safety. Inspired by that, a sensitive and rapid method was demonstrated for determination of five NAs (Nitrosopyrrolidine, Nitrosodimethylamine, Nitrosodiethylamine, Nitrosodipropylamine and Nitrosodibutylamine) using dispersive liquid-liquid microextraction (DLLME) followed by high-performance liquid chromatography with fluorescence detection (HPLC-FLD). The NAs were firstly denitrosated and labeled by 2-(11H-benzo[a]carbazol-11-yl) ethyl carbonochloridate (BCEC-Cl) and finally enriched by DLLME. Furthermore, the main DLLME conditions were optimized systematically. Under the optimal conditions, satisfactory limits of detection (LODs) were obtained with a range of 0.01-0.07ngg -1 , which were significantly lower than the reported methods. The developed method showed many merits including rapidity, simplicity, high sensitivity and excellent selectivity, which shows a broad prospect in food safety analysis. Copyright © 2017 Elsevier Ltd. All rights reserved.

Pell Grants as Performance-Based Scholarships? An Examination of Satisfactory Academic Progress Requirements in the Nation's Largest Need-Based Aid Program

ERIC Educational Resources Information Center

Schudde, Lauren; Scott-Clayton, Judith

2016-01-01

The Federal Pell Grant Program is the nation's largest need-based grant program. While students' initial eligibility for the Pell is based on financial need, renewal is contingent on meeting minimum academic standards similar to those in models of performance-based scholarships, including a grade point average (GPA) requirement and ratio of…

Modeling study of biomass burning plumes and their impact on urban air quality; a case study of Santiago de Chile

NASA Astrophysics Data System (ADS)

Cuchiara, G. C.; Rappenglück, B.; Rubio, M. A.; Lissi, E.; Gramsch, E.; Garreaud, R. D.

2017-10-01

On January 4, 2014, during the summer period in South America, an intense forest and dry pasture wildfire occurred nearby the city of Santiago de Chile. On that day the biomass-burning plume was transported by low-intensity winds towards the metropolitan area of Santiago and impacted the concentration of pollutants in this region. In this study, the Weather Research and Forecasting model coupled with Chemistry (WRF/Chem) is implemented to investigate the biomass-burning plume associated with these wildfires nearby Santiago, which impacted the ground-level ozone concentration and exacerbated Santiago's air quality. Meteorological variables simulated by WRF/Chem are compared against surface and radiosonde observations, and the results show that the model reproduces fairly well the observed wind speed, wind direction air temperature and relative humidity for the case studied. Based on an analysis of the transport of an inert tracer released over the locations, and at the time the wildfires were captured by the satellite-borne Moderate Resolution Imaging Spectroradiometer (MODIS), the model reproduced reasonably well the transport of biomass burning plume towards the city of Santiago de Chile within a time delay of two hours as observed in ceilometer data. A six day air quality simulation was performed: the first three days were used to validate the anthropogenic and biogenic emissions, and the last three days (during and after the wildfire event) to analyze the performance of WRF/Chem plume-rise model within FINNv1 fire emission estimations. The model presented a satisfactory performance on the first days of the simulation when contrasted against data from the well-established air quality network over the city of Santiago de Chile. These days represent the urban air quality base case for Santiago de Chile unimpacted by fire emissions. However, for the last three simulation days, which were impacted by the fire emissions, the statistical indices showed a decrease in the model performance. While the model showed a satisfactory evidence that wildfires plumes that originated in the vicinity of Santiago de Chile were transported towards the urban area and impacted the air quality, the model still underpredicted some pollutants substantially, likely due to misrepresentation of fire emission sources during those days. Potential uncertainties may include to the land use/land cover classifications and its characteristics, such as type and density of vegetation assigned to the region, where the fire spots are detected. The variability of the ecosystem type during the fire event might also play a role.

Hepatic resection for post-cholecystectomy bile duct injuries: a literature review

PubMed Central

Truant, Stéphanie; Boleslawski, Emmanuel; Lebuffe, Gilles; Sergent, Géraldine; Pruvot, François-René

2010-01-01

Objectives: This study seeks to identify factors for hepatectomy in the management of post-cholecystectomy bile duct injury (BDI) and outcome via a systematic review of the literature. Methods: Relevant literature was found by searching the PubMed database and the bibliographies of extracted articles. To avoid bias selection, factors for hepatectomy were analysed in series reporting both patients undergoing hepatectomy and patients undergoing biliary repair without hepatectomy (bimodal treatment). Relevant variables were the presence or absence of additional hepatic artery and/or portal vein injury, the level of BDI, and a previous biliary repair. Results: Among 460 potentially relevant publications, only 31 met the eligibility criteria. A total of 99 hepatectomies were reported among 1756 (5.6%) patients referred for post-cholecystectomy BDI. In eight series reporting bimodal treatment, including 232 patients, logistic regression multivariate analysis showed that hepatic arterial and Strasberg E4 and E5 injuries were independent factors associated with hepatectomy. Patients with combined arterial and Strasberg E4 or E5 injury were 43.3 times more likely to undergo hepatectomy (95% confidence interval 8.0–234.2) than patients without complex injury. Despite high postoperative morbidity, mortality rates were comparable with those of hepaticojejunostomy, except in urgent hepatectomies (within 2 weeks; four of nine patients died). Longterm outcome was satisfactory in 12 of 18 patients in the largest series. Conclusions: Hepatectomies were performed mainly in patients showing complex concurrent Strasberg E4 or E5 and hepatic arterial injury and provided satisfactory longterm outcomes despite high postoperative morbidity. PMID:20590909

[Primary care screening of problems in the elderly and a proposal for a screening protocol with a multidimensional approach].

PubMed

Lino, Valéria Teresa Saraiva; Portela, Margareth Crisóstomo; Camacho, Luiz Antonio Bastos; Rodrigues, Nadia Cristina Pinheiro; Andrade, Monica Kramer de Noronha; O'Dwyer, Gisele

2016-07-21

The objectives were to examine psychometric properties of a screening test for the elderly and to propose a protocol for use in primary care. The method consisted of four stages: (1) inter-evaluator reliability for performance tests and self-assessment questions for eight functions; (2) sensitivity and specificity of questions on depression and social support; (3) meeting of experts to select instrumental activities of daily living (IADL); and (4) elaboration of the protocol. Screening lasted 16 minutes. Inter-evaluator reliability was excellent for performance tests but poor for questions. Depression and social support showed satisfactory sensitivity and specificity (0.74/0.77 and 0.77/0.96). Four IADL were selected by more than 55% of the experts. Following the results, a screening protocol was elaborated that prioritized the use of performance tests, maintaining questions on mood, social support, and IADL. The study suggests better reproducibility of performance tests when compared to questions. For mood and social support, the questions may provide a first screening stage. The proposed protocol allows rapid screening of problems.

36 CFR 223.234 - Determination of responsibility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Special Forest Products Award of Contracts... Officer shall not award a contract, permit, or other instrument authorizing the sale of special forest... under all applicable laws and regulations; (6) The declared high bidder has a satisfactory performance...

36 CFR 223.101 - Determination of purchaser responsibility.

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Award of Contracts § 223.101 Determination of purchaser responsibility. (a) A Contracting Officer shall not award a timber sale... and governmental business commitments; (3) The purchaser has a satisfactory performance record on...

7 CFR 3400.6 - Grant awards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... intention of providing additional support at a future date. This type of research project grant is approved..., de novo peer review and staff evaluation, new recommendation and approval, and a new award instrument... additional support at a future date, provided that performance has been satisfactory, appropriations are...

Wall proximity corrections for hot-wire readings in turbulent flows

NASA Technical Reports Server (NTRS)

Hebbar, K. S.

1980-01-01

This note describes some details of recent (successful) attempts of wall proximity corrections for hot-wire measurements performed in a three-dimensional incompressible turbulent boundary layer. A simple and quite satisfactory method of estimating wall proximity effects on hot-wire readings is suggested.

Effects of blends of cement kiln dust and fly ash on properties of concrete.

DOT National Transportation Integrated Search

1995-01-01

This study evaluated concretes containing cement kiln dust (CKD) and fly ash to determine whether satisfactory properties can be achieved for long-lasting performance in the field. The results indicate that certain combinations of cement, CKD, and fl...

Latex modified Portland cement overlays : an analysis of samples removed from a bridge deck.

DOT National Transportation Integrated Search

1975-01-01

This report describes an evaluation of the latex modified mortar overlay the Route 85 (NBL) bridge over the Roanoke River. While the performance of the overlay has been generally satisfactory, corings and chloride analyses indicate the possibility of...

50 CFR 37.14 - Bonding.

Code of Federal Regulations, 2012 CFR

2012-10-01

... WILDLIFE REFUGE SYSTEM GEOLOGICAL AND GEOPHYSICAL EXPLORATION OF THE COASTAL PLAIN, ARCTIC NATIONAL... a surety bond of not less than $100,000, or other security satisfactory to the Service, to secure... needed to secure performance of its exploration plan and plan(s) of operation and compliance with the...

Performance and quality-control standards for composite floor, wall, and truss framing

Treesearch

Gerald A. Koenigshof

1985-01-01

Users must be assured that composite structural members are satisfactory for their intended purposes. Standards are provided for strength, stiffness, durability, and dimensional stability of composite floor, wall, and truss-framing members. Methods for enforcing compliance with the standards are suggested.

Assessment of Institutional Capacities of Flood Management Institution in Pakistan

NASA Astrophysics Data System (ADS)

Khan, Noor M.

2009-03-01

Pakistan is frequently devastated by floods. The flood impacts can be reduced if the flood management institutional capacities are improved. This paper reviews and assesses the capacities of flood management institution in Pakistan. Citing a number of case studies about the flood management practices in Pakistan, the study estimates the weaknesses and strengths of the institution with respect to various phases of flood management, namely, mitigation, preparedness, response, and rehabilitation and also with respect to various characteristics of institutions, namely, deliberation, coordination, implementation, and evaluation, using an improved capacity assessment framework. It has been found that the performance of the mitigation and rehabilitation phases is not satisfactory and that of preparedness and response is satisfactory. It is concluded that the functions of deliberation need to be improved while the other three characteristics of institution namely, coordination, implementation, and evaluation are performing well. The study will help the policy makers to concentrate on the identified weak capacities.

The relationship between physician participation in continuing professional development programs and physician in-practice peer assessments.

PubMed

Wenghofer, Elizabeth F; Marlow, Bernard; Campbell, Craig; Carter, Lorraine; Kam, Sophia; McCauley, William; Hill, Lori

2014-06-01

To investigate the relationship between physicians' performance, as evaluated through in-practice peer assessments, and their participation in continuing professional development (CPD). The authors examined the predictive effects of participating in the CPD programs of the Royal College of Physicians and Surgeons of Canada and the College of Family Physicians of Canada one year before in-practice peer assessments conducted by the medical regulatory authority in Ontario, Canada, in 2008-2009. Two multivariate logistic regression models were used to determine whether physicians who reported participating in any CPD and group-based, assessment-based, and/or self-directed CPD activities were more or less likely to receive satisfactory assessments than physicians who had not. All models were adjusted for the effects of sex, age, specialty certification, practice location, number of patient visits per week, hours worked per week, and international medical graduate status. A total of 617 physicians were included in the study. Analysis revealed that physicians who reported participating in any CPD activities were significantly more likely (odds ratio [OR] = 2.5; P = .021) to have satisfactory assessments than those who had not. In addition, physicians participating in group-based CPD activities were more likely to have satisfactory assessments than those who did not (OR = 2.4; P = .016). There is encouraging evidence supporting a positive predictive association between participating in CPD and performance on in-practice peer assessments. The findings have potential implications for policies which require physicians to participate in programs of lifelong learning.

Development of the CarMen-Q Questionnaire for mental workload assessment.

PubMed

Rubio-Valdehita, Susana; López-Núñez, María I; López-Higes, Ramón; Díaz-Ramiro, Eva M

2017-11-01

Mental workload has emerged as one of the most important occupational risk factors present in most psychological and physical diseases caused by work. In view of the lack of specific tools to assess mental workload, the objective of this research was to assess the construct validity and reliability of a new questionnaire for mental workload assessment (CarMen-Q). The sample was composed of 884 workers from several professional sectors, between 18 and 65 years old, 53.4% men and 46.6% women. To evaluate the validity based on relationships with other measures, the NASA-TLX scale was also administered. Confirmatory factor analysis showed an internal structure made up of four dimensions: cognitive, temporal and emotional demands and performance requirement. The results show satisfactory evidence of validity based on relationships with NASA-TLX and good reliability. The questionnaire has good psychometric properties and can be an easy, brief, useful tool for mental workload diagnosis and prevention.

A needle-type sensor for monitoring glucose in whole blood.

PubMed

Yang, Q; Atanasov, P; Wilkins, E

1997-01-01

A new surface-process technology employing electrochemical fixation of a bioactive substance (enzyme and heparin) to a sensor electrode was developed to provide biocompatability and functionality. The fabrication process includes electroentrapment of glucose oxidase and heparin on a platinum electrode by using 1,3-phenylenediamine codeposition. Electrochemically grown 1,3-phenylenediamine was also used as the outer coating of the sensor's enzyme electrode in order to extend the linear range. The sensor shows a sensitivity of 3 nA/mM and a linear range from 40 to 400 mg/dL at 37 degrees C when tested in whole blood. This sensor is characterized by a fast response. The sensor shows a minimum change in its performance when stored inactive in buffer for 12 weeks. When tested at physiologic glucose levels, the sensor demonstrates satisfactory low interference from common interfering substances. This technology seems promising for the preparation of implantable intravascular biosensors.

RF-MEMS tunable interdigitated capacitor and fixed spiral inductor for band pass filter applications

NASA Astrophysics Data System (ADS)

Bade, Ladon Ahmed; Dennis, John Ojur; Khir, M. Haris Md; Wen, Wong Peng

2016-11-01

This research presents the tunable Radio Frequency Micro Electromechanical Systems (RF-MEMS) coupled band-pass filter (BPF), which possess a wide tuning range and constructed by using the Chebyshev fourth degree equivalent circuit consisting of fixed inductors and interdigitated tunable capacitors. The suggested method was authenticated by designing a new tunable BPF with a 100% tuning range from 3.1 GHz to 4.9 GHz. The Metal Multi-User MEMS Process (Metal MUMPs) was involved in the process of design of this band-pass filter. It aimed to achieve the reconfiguration of frequencies and show high efficiency of RF in the applications that using Ultra Wide Band (UWB) such as wireless sensor networks. The RF performance of this filter was found to be very satisfactory due to its simple fabrication. Moreover, it showed less insertion loss of around 4 dB and high return loss of around 20 dB.

Color extended visual cryptography using error diffusion.

PubMed

Kang, InKoo; Arce, Gonzalo R; Lee, Heung-Kyu

2011-01-01

Color visual cryptography (VC) encrypts a color secret message into n color halftone image shares. Previous methods in the literature show good results for black and white or gray scale VC schemes, however, they are not sufficient to be applied directly to color shares due to different color structures. Some methods for color visual cryptography are not satisfactory in terms of producing either meaningless shares or meaningful shares with low visual quality, leading to suspicion of encryption. This paper introduces the concept of visual information pixel (VIP) synchronization and error diffusion to attain a color visual cryptography encryption method that produces meaningful color shares with high visual quality. VIP synchronization retains the positions of pixels carrying visual information of original images throughout the color channels and error diffusion generates shares pleasant to human eyes. Comparisons with previous approaches show the superior performance of the new method.

Molecularly imprinted covalent organic polymers for the selective extraction of benzoxazole fluorescent whitening agents from food samples.

PubMed

Ding, Hui; Wang, Rongyu; Wang, Xiao; Ji, Wenhua

2018-06-21

Molecularly imprinted covalent organic polymers were constructed by an imine-linking reaction between 1,3,5-triformylphloroglucinol and 2,6-diaminopyridine and used for the selective solid-phase extraction of benzoxazole fluorescent whitening agents from food samples. Binding experiments showed that imprinting sites on molecularly imprinted polymers had higher selectivity for targets compared with those of the corresponding non-imprinted polymers. Parameters affecting the solid-phase extraction procedure were examined. Under optimal conditions, actual samples were treated and the eluent was analyzed with high-performance liquid chromatography with diode-array detection. The results showed that the established method owned the wide linearity, satisfactory detection limits and quantification limits, and acceptable recoveries. Thus, this developed method possesses the practical potential to the selectively determine benzoxazole fluorescent whitening agents in complex food samples. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Statistical models and time series forecasting of sulfur dioxide: a case study Tehran.

PubMed

Hassanzadeh, S; Hosseinibalam, F; Alizadeh, R

2009-08-01

This study performed a time-series analysis, frequency distribution and prediction of SO(2) levels for five stations (Pardisan, Vila, Azadi, Gholhak and Bahman) in Tehran for the period of 2000-2005. Most sites show a quite similar characteristic with highest pollution in autumn-winter time and least pollution in spring-summer. The frequency distributions show higher peaks at two residential sites. The potential for SO(2) problems is high because of high emissions and the close geographical proximity of the major industrial and urban centers. The ACF and PACF are nonzero for several lags, indicating a mixed (ARMA) model, then at Bahman station an ARMA model was used for forecasting SO(2). The partial autocorrelations become close to 0 after about 5 lags while the autocorrelations remain strong through all the lags shown. The results proved that ARMA (2,2) model can provides reliable, satisfactory predictions for time series.

Evaluation of a long-term operation of a submerged nanofiltration membrane bioreactor (NF MBR) for advanced wastewater treatment.

PubMed

Choi, J H; Fukushi, K; Ng, H Y; Yamamoto, K

2006-01-01

Nanofiltration (NF) is considered as one of the most promising separation technologies to obtain a very good-quality permeate in water and wastewater treatment. A submerged NF membrane bioreactor (NF MBR) using polyamide membranes was tested for a long-term operation and the performance of the NF MBR was compared with that of a microfiltration MBR (MF MBR). Total organic carbon (TOC) concentration in the permeate of the NF MBR ranged from 0.5 to 2.0 mg/L, whereas that of the MF MBR showed an average of 5 mg/L. This could be explained by the tightness of the NF membrane. Although the concentration of organic matter in the supernatant of the NF MBR was higher than that in the permeate due to high rejection by the NF membrane, the NF MBR showed excellent treatment efficiency and satisfactory operational stability for a long-term operation.

Performance of four different rat strains in the autoshaping, two-object discrimination, and swim maze tests of learning and memory.

PubMed

Andrews, J S; Jansen, J H; Linders, S; Princen, A; Broekkamp, C L

1995-04-01

The performance of four strains of rats commonly used in behavioural research was assessed in three different tests of learning and memory. The four strains included three outbred lines (Long-Evans, Sprague-Dawley, Wistar) and one inbred strain (S3). Learning and memory were tested using three different paradigms: autoshaping of a lever press, a two-object discrimination test, and performance in a two-island swim maze task. The pigmented strains showed better performance in the autoshaping procedure: the majority of the Long-Evans and the S3 rats acquired the response, and the majority of the Wistar and Sprague-Dawley failed to acquire the response in the set time. The albino strains were slightly better in the swim maze than the pigmented strains. There appeared to be a speed/accuracy trade-off in the strategy used to solve the task. This was also evident following treatment with the cholinergic-depleting agent hemicholinium-3. The performance of the Long-Evans rats was most affected by the treatment in terms of accuracy and the Wistar and Sprague-Dawleys in terms of speed. In the two-object discrimination test only the Long-Evans showed satisfactory performance and were able to discriminate a novel from a known object a short interval after initial exposure. These results show large task- and strain-dependent differences in performance in tests of learning and memory. Some of the performance variation may be due to emotional differences between the strains and may be alleviated by extra training. However, the response to pharmacological manipulation may require more careful evaluation.(ABSTRACT TRUNCATED AT 250 WORDS)

24 CFR 203.385 - Types of satisfactory title evidence.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Types of satisfactory title... Title Waivers § 203.385 Types of satisfactory title evidence. The following types of title evidence shall be satisfactory to the Commissioner: (a) Fee or owner's title policy. A fee or owner's policy of...

[Determination of sennosides and degraded products in the process of sennoside metabolism by HPLC].

PubMed

Sun, Yan; Li, Xuetuo; Yu, Xingju

2004-01-01

A method for the separation and determination of sennosides A and B and the main composition (sennidins A and B) in degraded products of sennosides by linear gradient high performance liquid chromatography has been developed. Separation conditions were as follows: column, a Spherisorb C18 column (250 mm x 4.6 mm i.d., 10 microm); column temperature, 40 degrees C; detection wavelength, 360 nm; mobile phase A, 1.25% acetic acid aqueous solution; mobile phase B, methanol; linear gradient, 100% A --> (20 min) 100% B. The method is effective, quick, accurate and reproducible. The satisfactory results show that this new method has certain practical values as an approach of real-time analysis in the process of sennoside metabolism.

Estimating Missing Features to Improve Multimedia Information Retrieval

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bagherjeiran, A; Love, N S; Kamath, C

Retrieval in a multimedia database usually involves combining information from different modalities of data, such as text and images. However, all modalities of the data may not be available to form the query. The retrieval results from such a partial query are often less than satisfactory. In this paper, we present an approach to complete a partial query by estimating the missing features in the query. Our experiments with a database of images and their associated captions show that, with an initial text-only query, our completion method has similar performance to a full query with both image and text features.more » In addition, when we use relevance feedback, our approach outperforms the results obtained using a full query.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, Animesh; Wang, Han, E-mail: han.wang@fu-berlin.de; Site, Luigi Delle, E-mail: dellesite@fu-berlin.de

We employ the adaptive resolution approach AdResS, in its recently developed Grand Canonical-like version (GC-AdResS) [H. Wang, C. Hartmann, C. Schütte, and L. Delle Site, Phys. Rev. X 3, 011018 (2013)], to calculate the excess chemical potential, μ{sup ex}, of various liquids and mixtures. We compare our results with those obtained from full atomistic simulations using the technique of thermodynamic integration and show a satisfactory agreement. In GC-AdResS, the procedure to calculate μ{sup ex} corresponds to the process of standard initial equilibration of the system; this implies that, independently of the specific aim of the study, μ{sup ex}, for eachmore » molecular species, is automatically calculated every time a GC-AdResS simulation is performed.« less

Friction Freeform Fabrication of Superalloy Inconel 718: Prospects and Problems

NASA Astrophysics Data System (ADS)

Dilip, J. J. S.; Janaki Ram, G. D.

2014-01-01

Friction Freeform Fabrication is a new solid-state additive manufacturing process. The present investigation reports a detailed study on the prospects of this process for additive part fabrication in superalloy Inconel 718. Using a rotary friction welding machine and employing alloy 718 consumable rods in solution treated condition, cylindrical-shaped multi-layer friction deposits (10 mm diameter) were successfully produced. In the as-deposited condition, the deposits showed very fine grain size with no grain boundary δ phase. The deposits responded well to direct aging and showed satisfactory room-temperature tensile properties. However, their stress rupture performance was unsatisfactory because of their layered microstructure with very fine grain size and no grain boundary δ phase. The problem was overcome by heat treating the deposits first at 1353 K (1080 °C) (for increasing the grain size) and then at 1223 K (950 °C) (for precipitating the δ phase). Overall, the current study shows that Friction Freeform Fabrication is a very useful process for additive part fabrication in alloy 718.

36 CFR 223.101 - Determination of purchaser responsibility.

Code of Federal Regulations, 2011 CFR

2011-07-01

... purchaser has a satisfactory performance record on timber sale contracts. A prospective purchaser that is or... AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL PRODUCTS Timber Sale Contracts Award of Contracts § 223.101 Determination of purchaser responsibility. (a...

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2013 CFR

2013-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2014 CFR

2014-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2012 CFR

2012-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2011 CFR

2011-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

29 CFR 1926.901 - Blaster qualifications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... blaster shall be in good physical condition and not be addicted to narcotics, intoxicants, or similar types of drugs. (c) A blaster shall be qualified, by reason of training, knowledge, or experience, in... furnish satisfactory evidence of competency in handling explosives and performing in a safe manner the...

Band II, Music: 5623.50.

ERIC Educational Resources Information Center

Silkebakken, Dennis L.

This quinmester course of easy-to-medium difficulty is recommended for pupils who have had band or have demonstrated satisfactory proficiency on an instrument. Emphasis for both musicianship and performance is placed on intonation, phrasing, sight-reading, and instrumental technical facility, as well as responsibility of the individual to the…

7 CFR 3401.8 - Grant awards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... additional support at a future date. This type of research project grant is approved on the basis of peer... previous grant instrument. Such a renewal shall be based upon new application, de novo peer review and..., provided that performance has been satisfactory, appropriations are available for this purpose, and...

Schwannoma of T12 Vertebra: Case Report and Review of Literature

PubMed Central

Shackleford, I.; Al Jafari, M.

2000-01-01

We report a case of schwannoma of the twelfth thoracic vertebra that presented with paraparesis. The tumour was excised, and posterior and anterior stabilisation was performed. Eighteenmonths following this procedure, the patient has solid bony union, satisfactory neurological improvement and no recurrence. PMID:18521301

36 CFR 223.100 - Award to highest bidder.

Code of Federal Regulations, 2010 CFR

2010-07-01

... bidder has elected Forest Service road construction in response to an advertisement extending such an option, the Forest Service cannot perform the construction and in response to solicitation has not received a satisfactory bid for such construction within the period stated in the prospectus and the high...

30 CFR 20.8 - Class 1 lamps.

Code of Federal Regulations, 2010 CFR

2010-07-01

... parts including conductors, are adequately covered and protected by the sealed or locked compartments... upon satisfactory performance in service. (2) Corrosion of battery container. The material of which the container is made shall resist corrosion under conditions of normal use. [Sched. 10C, May 17, 1938, as...

"Life's First Need Is for Us to Be Realistic" and Other Reasons for Examining the Sociocultural Construction of Race in the Science Performance of African American Students

ERIC Educational Resources Information Center

Mutegi, Jomo W.

2013-01-01

The body of research aimed at explaining the science teaching and learning of African Americans has identified myriad factors that correlate with African American's science career choices and science performance generally. It has not, however, offered any satisfactory explanations as to why those factors are disproportionately racially determined.…

Nuclear Ensemble Approach with Importance Sampling.

PubMed

Kossoski, Fábris; Barbatti, Mario

2018-06-12

We show that the importance sampling technique can effectively augment the range of problems where the nuclear ensemble approach can be applied. A sampling probability distribution function initially determines the collection of initial conditions for which calculations are performed, as usual. Then, results for a distinct target distribution are computed by introducing compensating importance sampling weights for each sampled point. This mapping between the two probability distributions can be performed whenever they are both explicitly constructed. Perhaps most notably, this procedure allows for the computation of temperature dependent observables. As a test case, we investigated the UV absorption spectra of phenol, which has been shown to have a marked temperature dependence. Application of the proposed technique to a range that covers 500 K provides results that converge to those obtained with conventional sampling. We further show that an overall improved rate of convergence is obtained when sampling is performed at intermediate temperatures. The comparison between calculated and the available measured cross sections is very satisfactory, as the main features of the spectra are correctly reproduced. As a second test case, one of Tully's classical models was revisited, and we show that the computation of dynamical observables also profits from the importance sampling technique. In summary, the strategy developed here can be employed to assess the role of temperature for any property calculated within the nuclear ensemble method, with the same computational cost as doing so for a single temperature.

Evaluation of the AnnAGNPS Model for Predicting Runoff and Nutrient Export in a Typical Small Watershed in the Hilly Region of Taihu Lake

PubMed Central

Luo, Chuan; Li, Zhaofu; Li, Hengpeng; Chen, Xiaomin

2015-01-01

The application of hydrological and water quality models is an efficient approach to better understand the processes of environmental deterioration. This study evaluated the ability of the Annualized Agricultural Non-Point Source (AnnAGNPS) model to predict runoff, total nitrogen (TN) and total phosphorus (TP) loading in a typical small watershed of a hilly region near Taihu Lake, China. Runoff was calibrated and validated at both an annual and monthly scale, and parameter sensitivity analysis was performed for TN and TP before the two water quality components were calibrated. The results showed that the model satisfactorily simulated runoff at annual and monthly scales, both during calibration and validation processes. Additionally, results of parameter sensitivity analysis showed that the parameters Fertilizer rate, Fertilizer organic, Canopy cover and Fertilizer inorganic were more sensitive to TN output. In terms of TP, the parameters Residue mass ratio, Fertilizer rate, Fertilizer inorganic and Canopy cover were the most sensitive. Based on these sensitive parameters, calibration was performed. TN loading produced satisfactory results for both the calibration and validation processes, whereas the performance of TP loading was slightly poor. The simulation results showed that AnnAGNPS has the potential to be used as a valuable tool for the planning and management of watersheds. PMID:26364642

Reliability and validity of 12-item Short-Form health survey (SF-12) for the health status of Chinese community elderly population in Xujiahui district of Shanghai.

PubMed

Shou, Juan; Ren, Limin; Wang, Haitang; Yan, Fei; Cao, Xiaoyun; Wang, Hui; Wang, Zhiliang; Zhu, Shanzhu; Liu, Yao

2016-04-01

The 12-item Short-Form Health Survey (SF-12) is the abridged practical version of SF-36. This cross-sectional study was aimed to assess the reliability and validity of SF-12 for the health status of Chinese community elderly population. The Chinese community elderly people in Xujiahui district of Shanghai were investigated. The internal consistency reliability was assessed using Cronbach's alpha and split-half reliability coefficients. Construct validity was analyzed using exploratory factor analysis (EFA) and confirmatory factor analysis (CFA). Spearman's correlation coefficient (ρ) was used for the evaluation of criterion, convergent, and discriminant validity with Spearman's ρ ≥ 0.4 as satisfactory. Comparisons of the SF-12 summary scores among populations that differed in demographics were performed for discriminant validity. Total 1343 individuals aged ≥60 and <85 years old (response rate: 91.3 %) were analyzed. The Cronbach's α value (0.910) and the split-half reliability coefficient (0.812) reflected satisfactory internal consistency reliability of SF-12. EFA extracted a two-factor model (physical and mental health). About 60.7 % of the total variance was explained by the two factors. CFA showed that the two-factor solution provided a good fit to the data. Good convergent validity and discriminant validity of SF-12 were proved by the correction analyses (Spearman's ρ > 0.4) and the comparisons of the SF-12 summary scores among populations (P < 0.05). SF-12 summary scores were significantly correlated with the SF-36 summary scores (Spearman's ρ > 0.4, P < 0.05). In conclusion, SF-12 had satisfactory reliability and validity in measuring health status of Chinese community elderly population in Xujiahui district of Shanghai.

Adaptive Control of Four-Leg VSC Based DSTATCOM in Distribution System

NASA Astrophysics Data System (ADS)

Singh, Bhim; Arya, Sabha Raj

2014-01-01

This work discusses an experimental performance of a four-leg Distribution Static Compensator (DSTATCOM) using an adaptive filter based approach. It is used for estimation of reference supply currents through extracting the fundamental active power components of three-phase distorted load currents. This control algorithm is implemented on an assembled DSTATCOM for harmonics elimination, neutral current compensation and load balancing, under nonlinear loads. Experimental results are discussed, and it is noticed that DSTATCOM is effective solution to perform satisfactory performance under load dynamics.

49 CFR 385.413 - What happens if a motor carrier receives a proposed safety rating that is less than Satisfactory?

Code of Federal Regulations, 2010 CFR

2010-10-01

... proposed safety rating that is less than Satisfactory? 385.413 Section 385.413 Transportation Other... Satisfactory? (a) If a motor carrier does not already have a safety permit, it will not be issued a safety permit (including a temporary safety permit) unless and until a Satisfactory safety rating is issued to...

A digital clock recovery algorithm based on chromatic dispersion and polarization mode dispersion feedback dual phase detection for coherent optical transmission systems

NASA Astrophysics Data System (ADS)

Liu, Bo; Xin, Xiangjun; Zhang, Lijia; Wang, Fu; Zhang, Qi

2018-02-01

A new feedback symbol timing recovery technique using timing estimation joint equalization is proposed for digital receivers with two samples/symbol or higher sampling rate. Different from traditional methods, the clock recovery algorithm in this paper adopts another algorithm distinguishing the phases of adjacent symbols, so as to accurately estimate the timing offset based on the adjacent signals with the same phase. The addition of the module for eliminating phase modulation interference before timing estimation further reduce the variance, thus resulting in a smoothed timing estimate. The Mean Square Error (MSE) and Bit Error Rate (BER) of the resulting timing estimate are simulated to allow a satisfactory estimation performance. The obtained clock tone performance is satisfactory for MQAM modulation formats and the Roll-off Factor (ROF) close to 0. In the back-to-back system, when ROF= 0, the maximum of MSE obtained with the proposed approach reaches 0 . 0125. After 100-km fiber transmission, BER decreases to 10-3 with ROF= 0 and OSNR = 11 dB. With the increase in ROF, the performances of MSE and BER become better.

Effect of formulation variables on the physical properties and stability of Dead Sea mud masks.

PubMed

Shahin, Sawsan; Hamed, Saja; Alkhatib, Hatim S

2015-01-01

The physical stability of Dead Sea mud mask formulations under different conditions and their rheological properties were evaluated as a function of the type and level of thickeners, level of the humectant, incorporation of ethanol, and mode of mud treatment. Formulations were evaluated in terms of visual appearance, pH, moisture content, spreadability, extrudability, separation, rate of drying at 32 degrees C, and rheological properties. Prepared mud formulations and over-the-shelf products showed viscoplastic shear thinning behavior; satisfactory rheological behavior was observed with formulations containing a total concentration of thickeners less than 10% (w/w). Casson and Herschel-Bulkley models were found the most suitable to describe the rheological data of the prepared formulations. Thickener incorporation decreased phase separation and improved formulation stability. Bentonite incorporation in the mud prevented color changes during stability studies while glycerin improved spreadability. Addition of 5% (w/w) ethanol improved mud extrudability, slightly increased percent separation, accelerated drying at 32 degrees C, and decreased viscosity and yield stress values. Different mud treatment techniques did not cause a clear behavioral change in the final mud preparation. B10G and K5B5G were labeled as "best formulas" based on having satisfactory physical and aesthetic criteria investigated in this study, while other formulations failed in one or more of the tests we have performed.

Improving the Response of Accelerometers for Automotive Applications by Using LMS Adaptive Filters

PubMed Central

Hernandez, Wilmar; de Vicente, Jesús; Sergiyenko, Oleg; Fernández, Eduardo

2010-01-01

In this paper, the least-mean-squares (LMS) algorithm was used to eliminate noise corrupting the important information coming from a piezoresisitive accelerometer for automotive applications. This kind of accelerometer is designed to be easily mounted in hard to reach places on vehicles under test, and they usually feature ranges from 50 to 2,000 g (where is the gravitational acceleration, 9.81 m/s2) and frequency responses to 3,000 Hz or higher, with DC response, durable cables, reliable performance and relatively low cost. However, here we show that the response of the sensor under test had a lot of noise and we carried out the signal processing stage by using both conventional and optimal adaptive filtering. Usually, designers have to build their specific analog and digital signal processing circuits, and this fact increases considerably the cost of the entire sensor system and the results are not always satisfactory, because the relevant signal is sometimes buried in a broad-band noise background where the unwanted information and the relevant signal sometimes share a very similar frequency band. Thus, in order to deal with this problem, here we used the LMS adaptive filtering algorithm and compare it with others based on the kind of filters that are typically used for automotive applications. The experimental results are satisfactory. PMID:22315542

Instrumented posterior lumbar interbody fusion (PLIF) with interbody fusion device (Cage) in degenerative disc disease (DDD): 3 years outcome.

PubMed

Ahsan, M K; Hossain, M A; Sakeb, N; Khan, S I; Zaman, N

2013-10-01

This prospective interventional study carried out at Bangabandhu Sheikh Mujib Medical University and a private hospital in Dhaka, Bangladesh during the period from October 2003 to September 2011. Surgical treatment of degenerative disc disease (DDD) should aim to re-expand the interbody space and stabilize until fusion is complete. The present study conducted to find out the efficacy of using interbody fusion device (Cage) to achieve interbody space re-expansion and fusion in surgical management of DDD. We have performed the interventional study on 53 patients, 42 female and 11 male, with age between 40 to 67 years. All the patients were followed up for 36 to 60 months (average 48 months). Forty seven patients were with spondylolisthesis and 06 with desiccated disc. All subjects were evaluated with regard to immediate and long term complications, radiological fusion and interbody space re-expansion and maintenance. The clinical outcome (pain and disability) was scored by standard pre and postoperative questionnaires. Intrusion, extrusion and migration of the interbody fusion cage were also assessed. Forty seven patients were considered to have satisfactory outcome in at least 36 months follow up. Pseudoarthrosis developed in 04 cases and 06 patients developed complications. In this series posterior lumbar interbody fusion (PLIF) with interbody cage and instrumentation in DDD showed significant fusion rate and maintenance of interbody space. Satisfactory outcome observed in 88.68% cases.

A Randomized Clinical Trial of Comparing Monophasic Monodensified and Biphasic Nonanimal Stabilized Hyaluronic Acid Dermal Fillers in Treatment of Asian Nasolabial Folds.

PubMed

Zhou, Shuang-Bai; Xie, Yun; Chiang, Cheng-An; Liu, Kai; Li, Qing-Feng

2016-09-01

Cross-linked hyaluronic acids (HAs) with varying characteristics and formulations are available. Despite the popularity of HA, limited studies compared the effectiveness of monophasic monodensified hyaluronic acid (MMHA) and biphasic nonanimal stabilized hyaluronic acid (BHA) products in correcting nasolabial folds (NLFs) in the Asian population. This double-blinded, randomized research aimed at evaluating the outcomes of MMHA and BHA products in treating Asian NLFs. Subjects aged between 18 and 65 years with moderate-to-severe NLFs were randomized to receive MMHA or BHA treatment. A touch-up treatment with the same product was performed at the 4-week follow-up, if needed. The effectiveness was evaluated for 24 weeks by masked investigators. All adverse events were recorded for safety evaluation. Twenty-five subjects in the MMHA Group and twenty-four subjects in the BHA Group finished 24-week follow-up. Results showed that subjects from both groups obtained satisfactory outcome in NLF correction. A lower amount of MMHA was required to achieve a similar result as that of BHA (p < .01). Both HA products maintained the effectiveness at the end of the 24-week follow-up. Both MMHA and BHA are effective for correcting NLF in Asian patients, producing satisfactory results. Monophasic monodensified hyaluronic acid provides similar satisfaction to BHA while requiring less injection volume.

Dispersive liquid-liquid microextraction applied to isolation and concentration of alkylphenols and their short-chained ethoxylates in water samples.

PubMed

Zgoła-Grześkowiak, Agnieszka

2010-03-12

Dispersive liquid-liquid microextraction (DLLME) coupled with high-performance liquid chromatography with fluorescence detector was applied for the determination of alkylphenols and their short-chained ethoxylates in water samples. Development of DLLME procedure included optimisation of some important parameters such as kind and volume of extracting and dispersing solvents. Under optimised conditions 50 microL of trichloroethylene in 1.5 mL of acetone were rapidly injected into 5 mL of a water sample. After centrifuging the organic phase containing the analytes was taken for evaporation with a gentle nitrogen purge and reconstituted to 50 microL of acetonitrile. The aliquot of this solution was analysed with the use of HPLC. For octylphenol (OP) and octylphenol ethoxylates (OPEOs) linearity was satisfactory in the range 8-1000 microg L(-1) and for nonylphenol (NP) and nonylphenol ethoxylates (NPEOs) linearity was in the range from 50 to about 3000 microg L(-1). Limit of quantitation was 0.1 microg L(-1) for OP and OPEOs and 0.3 microg L(-1) for NP and NPEOs. Satisfactory recoveries between 66 and 79% were obtained for environmental samples. The results showed that DLLME is a simple, rapid and sensitive analytical method for the preconcentration of trace amounts of alkylphenols and their ethoxylates in environmental water samples. Copyright (c) 2010 Elsevier B.V. All rights reserved.

Evaluation of a deformable registration algorithm for subsequent lung computed tomography imaging during radiochemotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stützer, Kristin; Haase, Robert; Exner, Florian

2016-09-15

Purpose: Rating both a lung segmentation algorithm and a deformable image registration (DIR) algorithm for subsequent lung computed tomography (CT) images by different evaluation techniques. Furthermore, investigating the relative performance and the correlation of the different evaluation techniques to address their potential value in a clinical setting. Methods: Two to seven subsequent CT images (69 in total) of 15 lung cancer patients were acquired prior, during, and after radiochemotherapy. Automated lung segmentations were compared to manually adapted contours. DIR between the first and all following CT images was performed with a fast algorithm specialized for lung tissue registration, requiring themore » lung segmentation as input. DIR results were evaluated based on landmark distances, lung contour metrics, and vector field inconsistencies in different subvolumes defined by eroding the lung contour. Correlations between the results from the three methods were evaluated. Results: Automated lung contour segmentation was satisfactory in 18 cases (26%), failed in 6 cases (9%), and required manual correction in 45 cases (66%). Initial and corrected contours had large overlap but showed strong local deviations. Landmark-based DIR evaluation revealed high accuracy compared to CT resolution with an average error of 2.9 mm. Contour metrics of deformed contours were largely satisfactory. The median vector length of inconsistency vector fields was 0.9 mm in the lung volume and slightly smaller for the eroded volumes. There was no clear correlation between the three evaluation approaches. Conclusions: Automatic lung segmentation remains challenging but can assist the manual delineation process. Proven by three techniques, the inspected DIR algorithm delivers reliable results for the lung CT data sets acquired at different time points. Clinical application of DIR demands a fast DIR evaluation to identify unacceptable results, for instance, by combining different automated DIR evaluation methods.« less

Development and application of a large scale river system model for National Water Accounting in Australia

NASA Astrophysics Data System (ADS)

Dutta, Dushmanta; Vaze, Jai; Kim, Shaun; Hughes, Justin; Yang, Ang; Teng, Jin; Lerat, Julien

2017-04-01

Existing global and continental scale river models, mainly designed for integrating with global climate models, are of very coarse spatial resolutions and lack many important hydrological processes, such as overbank flow, irrigation diversion, groundwater seepage/recharge, which operate at a much finer resolution. Thus, these models are not suitable for producing water accounts, which have become increasingly important for water resources planning and management at regional and national scales. A continental scale river system model called Australian Water Resource Assessment River System model (AWRA-R) has been developed and implemented for national water accounting in Australia using a node-link architecture. The model includes major hydrological processes, anthropogenic water utilisation and storage routing that influence the streamflow in both regulated and unregulated river systems. Two key components of the model are an irrigation model to compute water diversion for irrigation use and associated fluxes and stores and a storage-based floodplain inundation model to compute overbank flow from river to floodplain and associated floodplain fluxes and stores. The results in the Murray-Darling Basin shows highly satisfactory performance of the model with median daily Nash-Sutcliffe Efficiency (NSE) of 0.64 and median annual bias of less than 1% for the period of calibration (1970-1991) and median daily NSE of 0.69 and median annual bias of 12% for validation period (1992-2014). The results have demonstrated that the performance of the model is less satisfactory when the key processes such as overbank flow, groundwater seepage and irrigation diversion are switched off. The AWRA-R model, which has been operationalised by the Australian Bureau of Meteorology for continental scale water accounting, has contributed to improvements in the national water account by substantially reducing accounted different volume (gain/loss).

Optimization of an Indirect Enzymatic Method for the Simultaneous Analysis of 3-MCPD, 2-MCPD, and Glycidyl Esters in Edible Oils.

PubMed

Koyama, Kazuo; Miyazaki, Kinuko; Abe, Kousuke; Ikuta, Keiich; Egawa, Yoshitsugu; Kitta, Tadashi; Kido, Hirotsugu; Sano, Takashi; Takahashi, Yukinari; Nezu, Toru; Nohara, Hidenori; Miyashita, Takashi; Yada, Hiroshi; Yamazaki, Kumiko; Watanabe, Yomi

2015-01-01

We developed a novel, indirect enzymatic method for the analysis of fatty acid esters of 3-monochloro-1,2-propanediol (3-MCPD), 2-monochloro-1,3-propanediol (2-MCPD), and glycidol (Gly) in edible oils and fats. Using this method, the ester analytes were rapidly cleavaged by Candida rugosa lipase at room temperature for 0.5 h. As a result of the simultaneous hydrolysis and bromination steps, 3-MCPD esters, 2-MCPD esters, and glycidyl esters were converted to free 3-MCPD, 2-MCPD, and 3-monobromo-1,2-propanediol (3-MBPD), respectively. After the addition of internal standards, the mixtures were washed with hexane, derivatized with phenylboronic acid, and analyzed by gas chromatography-mass spectrometer (GC-MS). The analytical method was evaluated in preliminary and feasibility studies performed by 13 laboratories. The preliminary study from 4 laboratories showed the reproducibility (RSD R ) of < 10% and recoveries in the range of 102-111% for the spiked 3-MCPD and 2-MCPD in extra virgin olive (EVO) oil, semi-solid palm oil, and solid palm oil. However, the RSDR and recoveries of Gly in the palm oil samples were not satisfactory. The Gly content of refrigerated palm oil samples decreased whereas the samples at room temperature were stable for three months, and this may be due to the depletion of Gly during cold storage. The feasibility studies performed by all 13 laboratories were conducted based on modifications of the shaking conditions for ester cleavage, the conditions of Gly bromination, and the removal of gel formed by residual lipase. Satisfactory RSDR were obtained for EVO oil samples spiked with standard esters (4.4% for 3-MCPD, 11.2% for 2-MCPD, and 6.6% for Gly).

Performance of hybrid programming models for multiscale cardiac simulations: preparing for petascale computation.

PubMed

Pope, Bernard J; Fitch, Blake G; Pitman, Michael C; Rice, John J; Reumann, Matthias

2011-10-01

Future multiscale and multiphysics models that support research into human disease, translational medical science, and treatment can utilize the power of high-performance computing (HPC) systems. We anticipate that computationally efficient multiscale models will require the use of sophisticated hybrid programming models, mixing distributed message-passing processes [e.g., the message-passing interface (MPI)] with multithreading (e.g., OpenMP, Pthreads). The objective of this study is to compare the performance of such hybrid programming models when applied to the simulation of a realistic physiological multiscale model of the heart. Our results show that the hybrid models perform favorably when compared to an implementation using only the MPI and, furthermore, that OpenMP in combination with the MPI provides a satisfactory compromise between performance and code complexity. Having the ability to use threads within MPI processes enables the sophisticated use of all processor cores for both computation and communication phases. Considering that HPC systems in 2012 will have two orders of magnitude more cores than what was used in this study, we believe that faster than real-time multiscale cardiac simulations can be achieved on these systems.

FE-DEM Analysis of the Effect of Tread Pattern on the Tractive Performance of Tires Operating on Sand

NASA Astrophysics Data System (ADS)

Nakashima, Hiroshi; Takatsu, Yuzuru; Shinone, Hisanori; Matsukawa, Hisao; Kasetani, Takahiro

Soil-tire system interaction is a fundamental and important research topic in terramechanics. We applied a 2D finite element, discrete element method (FE-DEM), using FEM for the tire and the bottom soil layer and DEM for the surface soil layer. Satisfactory performance analysis was achieved. In this study, to clarify the capabilities and limitations of the method for soil-tire interaction analysis, the tractive performance of real automobile tires with two different tread patterns—smooth and grooved—was analyzed by FE-DEM, and the numerical results compared with the experimental results obtained using an indoor traction measurement system. The analysis of tractive performance could be performed with sufficient accuracy by the proposed 2D dynamic FE-DEM. FE-DEM obtained larger drawbar pull for a tire with a grooved tread pattern, which was verified by the experimental results. Moreover, the result for the grooved tire showed almost the same gross tractive effort and similar running resistance as in experiments. However, for a tire with smooth tread pattern, the analyzed gross tractive effort and running resistance behaved differently than the experimental results, largely due to the difference in tire sinkage in FE-DEM.

Therapeutic embolization of the genicular arteries for recurrent hemarthrosis after total knee arthroplasty.

PubMed

Katsimihas, M; Robinson, D; Thornton, M; Langkamer, V G

2001-10-01

The case of a recurrent hemarthrosis initially presenting 30 months after a total knee arthroplasty in a patient on lifelong warfarin is described. Angiography was used to aid in the diagnosis, and therapeutic selective embolization of the superior genicular arteries was performed with satisfactory clinical results.

Evaluation of a Colorimetric Personal Dosimeter for Nitrogen Oxide.

ERIC Educational Resources Information Center

Diamond, Philip

A personal colorimetric dosimeter for nitrogen dioxide was developed. Tests were performed to determine the response of these strips to various concentrations of NO2. The dosimeter strips were satisfactory for approximate determinations of total exposure (concentration + time) of nitrogen dioxide. The total exposure was calculated in terms of time…

30 CFR 27.32 - Tests to determine performance of the system.

Code of Federal Regulations, 2010 CFR

2010-07-01

... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS METHANE-MONITORING SYSTEMS Test Requirements § 27.32... durability of a methane-monitoring system. The tests shall be conducted as follows: 2 Normal replacements and... gas (containing a high percentage of methane) is a satisfactory substitute for pure methane in these...

Construction and performance of a stone matrix asphalt mix test section in Virginia.

DOT National Transportation Integrated Search

1995-01-01

SMA is a gap-graded mix filled with a rich asphalt-fines mastic developed in Europe. In 1991 five states constructed trial sections to determine if satisfactory mixes could be produced in the United States with current materials and high rates of pro...

13 CFR 120.451 - How does a Lender become a PLP Lender?

Code of Federal Regulations, 2010 CFR

2010-01-01

... for final decision. (b) In making its decision, SBA considers whether the Lender: (1) Has the required.... The Lender's Risk Rating, among other factors, will be considered in determining satisfactory SBA performance. Other factors may include, but are not limited to, on-site review/examination assessments...

13 CFR 120.812 - Probationary period for newly certified CDCs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... its recommendation to the D/FA, who will make the final decision. SBA will determine permanent CDC... discretion. The CDC's Risk Rating, among other factors, will be considered in determining satisfactory SBA performance. Other factors may include, but are not limited to, on-site review/examination assessments...

Iranian Special Library Standards.

ERIC Educational Resources Information Center

Harvey, John F.

The purposes of these standards are: (1) to suggest the steps necessary for the establishment of special libraries; (2) for those recently established, to suggest the steps necessary to achieve satisfactory performance levels in all areas, and finally, (3) for well established libraries, to suggest the steps necessary to achieve excellence. These…

REAL TIME MONITORING OF PCDD/PCDF FOR TRANSIENT CHARACTERIZATION AND PROCESS CONTROL

EPA Science Inventory

Current sampling methods for PCDD/F emission compliance make use of a sample taken during steady state conditions which is assumed to be representative of facility performance. This is often less than satisfactory. The rapid variation of PCDDs, PCDF, and other co-pollutants due ...

Success and challenges met during the calibration of APEX on large plots

USDA-ARS?s Scientific Manuscript database

As the APEX model is increasingly considered for the evaluation of agricultural systems, satisfactory performance of APEX on fields is critical. APEX was applied to 16 replicated large plots established in 1991 in Northeast Missouri. Until 2009, each phase of each rotation was represented every year...

The Effects of Hypnotherapy on Homosexuality

PubMed Central

Roper, Peter

1967-01-01

Fifteen homosexuals were treated with hypnosis. The patients were selected from a general psychiatric practice and had a long history of confirmed homosexual behaviour and showed no evidence of organic or psychotic illness. The type of hypnotic induction attempted in all cases is described. In those where a satisfactory depth of hypnotic trance was achieved a change in sexual orientation was suggested to the patient. Before therapy, each patient was assessed using the Kinsey scale. Results were evaluated in terms of the patient's subsequent behaviour and his subjective feelings. Of the 15 patients, three showed no improvement, four showed a mild improvement and eight showed a marked improvement. There was a significant correlation between the depth of hypnosis achieved and the therapeutic outcome. Those patients who reached a deep level of hypnotic trance were most likely to show a marked improvement. There were no significant correlations with other factors such as degree of homosexuality as measured on the Kinsey scale and the patient's marital status. Treatment of homosexuals with hypnosis may produce more satisfactory results than those obtainable by other means. The best results are likely to be achieved in patients who are good hypnotic subjects. PMID:6017544

Knowledge and awareness of HIV/AIDS among students of a technical institution.

PubMed

Gupta, Prem Prakash; Verma, Rohit Kumar; Tripathi, Poonam; Gupta, Shruti; Pandey, Awanish Kumar

2015-08-01

Acquired immunodeficiency syndrome (AIDS) is a major health problem worldwide. The number of infected people is increasing daily. Knowledge and awareness toward prevention and control of the disease is necessary among both educated and illiterate people. This study is aimed at assessing the knowledge and awareness about human immunodeficiency virus (HIV)/AIDS among undergraduate students studying in a technical institute in Gorakhpur, Uttar Pradesh, India. A community-based cross-sectional study was conducted among youths aged 15-30 years studying in a technical institution in Gorakhpur. Data were collected using a semistructured questionnaire developed with the help of existing literature, from 250 participants (students). The main source of information was the television; knowledge about the difference between HIV/AIDS was satisfactory. The findings showed that the knowledge about modes of prevention (blood checkup, needle/syringe sterilization) was satisfactory. There were several misconceptions about the modes of transmission of the disease, such as through mosquito bites, eating/drinking, and kissing. The knowledge of the study population was satisfactory, and there is a need for innovation and comprehensive education to impart better knowledge and understanding about HIV/AIDS.

A vision-based weld quality evaluation system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnett, R.J.; Cook, G.E.; Strauss, A.M.

1996-12-31

Inspection of the appearance of weld beads is an integral part of the overall welding process. Lack of satisfactory appearance in itself may be sufficient grounds for part rejection or the lack of satisfactory appearance may be used as an indirect indicator of more substantive problems such as poor fusion or subsurface cracks. In all cases the inspection process tends to be both time and labor intensive. The present research uses a video system and appropriate image capture and processing to determine the quality of the weld based upon surface appearance. This relative quality rating was compared to similar ratingsmore » performed by human inspectors and was found to give very good correlation. The system was implemented for the Gas Tungsten Arc Welding (GTAW) and Gas Metal Arc Welding (GMAW) processes.« less

Endoscopic carpal tunnel release: a prospective analysis of factors associated with unsatisfactory results.

PubMed

Straub, T A

1999-04-01

The first 100 consecutive cases of endoscopic carpal tunnel release (ECTR) performed by the author were studied prospectively during 6 to 24 months follow-up. Various preoperative and postoperative factors were subjected to statistical analysis to determine possible associations with unsatisfactory results. Overall, 92% of hands had a satisfactory result from ECTR, although not all were rendered symptom-free. There were no significant complications. Preoperative factors associated with an increased likelihood of unsatisfactory results included hands with preoperative weakness, widened two-point discrimination, myofascial pain syndrome or fibromyalgia, involvement in litigation, multiple compressive neuropathies, or the presence of abnormal psychological factors. A trend to less satisfactory results was present in Workers' Compensation cases and patients with normal motor latencies on nerve conduction studies. Multiple postoperative factors correlated with unsatisfactory results.

Unconventional Treatments for Vitiligo: Are They (Un) Satisfactory?

PubMed

Gianfaldoni, Serena; Tchernev, Georgi; Lotti, Jacopo; Wollina, Uwe; Satolli, Francesca; Rovesti, Miriam; França, Katlein; Lotti, Torello

2018-01-25

The authors show a brief overview of the vitiligo's unconventional therapies. A part for well-documented effectiveness of L-phenylalanine, PGE2 and antioxidant agents in the treatment of vitiligo, for the other therapeutical approaches more investigations are needed.

Psychometric properties of the motor diagnostics in the German football talent identification and development programme.

PubMed

HÖner, Oliver; Votteler, Andreas; Schmid, Markus; Schultz, Florian; Roth, Klaus

2015-01-01

The utilisation of motor performance tests for talent identification in youth sports is discussed intensively in talent research. This article examines the reliability, differential stability and validity of the motor diagnostics conducted nationwide by the German football talent identification and development programme and provides reference values for a standardised interpretation of the diagnostics results. Highly selected players (the top 4% of their age groups, U12-U15) took part in the diagnostics at 17 measurement points between spring 2004 and spring 2012 (N = 68,158). The heterogeneous test battery measured speed abilities and football-specific technical skills (sprint, agility, dribbling, ball control, shooting, juggling). For all measurement points, the overall score and the speed tests showed high internal consistency, high test-retest reliability and satisfying differential stability. The diagnostics demonstrated satisfying factorial-related validity with plausible and stable loadings on the two empirical factors "speed" and "technical skills". The score, and the technical skills dribbling and juggling, differentiated the most among players of different performance levels and thus showed the highest criterion-related validity. Satisfactory psychometric properties for the diagnostics are an important prerequisite for a scientifically sound rating of players' actual motor performance and for the future examination of the prognostic validity for success in adulthood.

Embedded Hyperchaotic Generators: A Comparative Analysis

NASA Astrophysics Data System (ADS)

Sadoudi, Said; Tanougast, Camel; Azzaz, Mohamad Salah; Dandache, Abbas

In this paper, we present a comparative analysis of FPGA implementation performances, in terms of throughput and resources cost, of five well known autonomous continuous hyperchaotic systems. The goal of this analysis is to identify the embedded hyperchaotic generator which leads to designs with small logic area cost, satisfactory throughput rates, low power consumption and low latency required for embedded applications such as secure digital communications between embedded systems. To implement the four-dimensional (4D) chaotic systems, we use a new structural hardware architecture based on direct VHDL description of the forth order Runge-Kutta method (RK-4). The comparative analysis shows that the hyperchaotic Lorenz generator provides attractive performances compared to that of others. In fact, its hardware implementation requires only 2067 CLB-slices, 36 multipliers and no block RAMs, and achieves a throughput rate of 101.6 Mbps, at the output of the FPGA circuit, at a clock frequency of 25.315 MHz with a low latency time of 316 ns. Consequently, these good implementation performances offer to the embedded hyperchaotic Lorenz generator the advantage of being the best candidate for embedded communications applications.

Improving personalized link prediction by hybrid diffusion

NASA Astrophysics Data System (ADS)

Liu, Jin-Hu; Zhu, Yu-Xiao; Zhou, Tao

2016-04-01

Inspired by traditional link prediction and to solve the problem of recommending friends in social networks, we introduce the personalized link prediction in this paper, in which each individual will get equal number of diversiform predictions. While the performances of many classical algorithms are not satisfactory under this framework, thus new algorithms are in urgent need. Motivated by previous researches in other fields, we generalize heat conduction process to the framework of personalized link prediction and find that this method outperforms many classical similarity-based algorithms, especially in the performance of diversity. In addition, we demonstrate that adding one ground node that is supposed to connect all the nodes in the system will greatly benefit the performance of heat conduction. Finally, better hybrid algorithms composed of local random walk and heat conduction have been proposed. Numerical results show that the hybrid algorithms can outperform other algorithms simultaneously in all four adopted metrics: AUC, precision, recall and hamming distance. In a word, this work may shed some light on the in-depth understanding of the effect of physical processes in personalized link prediction.

Is The Late Mandibular Fracture From Third Molar Extraction a Risk Towards Malpractice? Case Report with the Analysis of Ethical and Legal Aspects.

PubMed

Dos Santos Silva, Weuler; Silveira, Rubens Jorge; de Araujo Andrade, Michelle Gouveia Benicio; Franco, Ademir; Silva, Rhonan Ferreira

2017-01-01

The present study reports a case of late mandibular fracture due to third molar extraction and highlights the inherent clinical, ethical and legal aspects related to this surgical complication. A female patient underwent surgical procedure for the extraction of the mandibular right third molar. Two days after the surgery the patient reported pain and altered occlusion in the right side of the mandible. After clinical and radiographic re-examination, the diagnosis of late mandibular fracture was established. A second surgery, under general anaesthesia, was performed for the fixation of the mandibular bone. The fractured parts were reduced and fixed with locking plate systems and 2 mm screws following load-sharing principles. The masticatory function showed optimal performance within 7 and 21 days after the surgery. Complete bone healing was observed within 1 year of follow-up. For satisfactory surgical outcomes, adequate surgical planning and techniques must be performed. Signed informed consents explaining the risks and benefits of the treatment must be used to avoid ethical and legal disputes in dentistry.

Steady-state phase error for a phase-locked loop subjected to periodic Doppler inputs

NASA Technical Reports Server (NTRS)

Chen, C.-C.; Win, M. Z.

1991-01-01

The performance of a carrier phase locked loop (PLL) driven by a periodic Doppler input is studied. By expanding the Doppler input into a Fourier series and applying the linearized PLL approximations, it is easy to show that, for periodic frequency disturbances, the resulting steady state phase error is also periodic. Compared to the method of expanding frequency excursion into a power series, the Fourier expansion method can be used to predict the maximum phase error excursion for a periodic Doppler input. For systems with a large Doppler rate fluctuation, such as an optical transponder aboard an Earth orbiting spacecraft, the method can be applied to test whether a lower order tracking loop can provide satisfactory tracking and thereby save the effect of a higher order loop design.

The generalization ability of online SVM classification based on Markov sampling.

PubMed

Xu, Jie; Yan Tang, Yuan; Zou, Bin; Xu, Zongben; Li, Luoqing; Lu, Yang

2015-03-01

In this paper, we consider online support vector machine (SVM) classification learning algorithms with uniformly ergodic Markov chain (u.e.M.c.) samples. We establish the bound on the misclassification error of an online SVM classification algorithm with u.e.M.c. samples based on reproducing kernel Hilbert spaces and obtain a satisfactory convergence rate. We also introduce a novel online SVM classification algorithm based on Markov sampling, and present the numerical studies on the learning ability of online SVM classification based on Markov sampling for benchmark repository. The numerical studies show that the learning performance of the online SVM classification algorithm based on Markov sampling is better than that of classical online SVM classification based on random sampling as the size of training samples is larger.

[Isolated hyoid bone fracture due to blunt trauma: case report].

PubMed

Erdoğan, Mehmet Ozgür; Koşargelir, Mehmet; Yorulmaz, Rasim; Meriç, Kaan; Erdoğan, Barış

2013-05-01

Fractures of the hyoid bone are very rare. Diagnosis of hyoid fracture is difficult and can be made only with a strong degree of suspicion. We report a case of isolated hyoid bone fracture due to blunt trauma to the neck. A 26-year-old woman was admitted to emergency department for motor vehicle accident. She complained of dysphagia and anterior neck discomfort. Physical examination showed hyperemia and tenderness of neck. A tomographic scan of neck was performed. The findings demonstrated hyoid fracture. Patient was observed with medical therapy for 24 hours and discharged with recommendation of outpatient control.Emergency physician has to be aware of the possibility of hyoid fractures in blunt traumas. Patients with hyoid fracture should be observed for 24 hours. Generally, medical treatment is satisfactory in isolated hyoid fractures.

Surface Modeling of Workpiece and Tool Trajectory Planning for Spray Painting Robot

PubMed Central

Tang, Yang; Chen, Wei

2015-01-01

Automated tool trajectory planning for spray-painting robots is still a challenging problem, especially for a large free-form surface. A grid approximation of a free-form surface is adopted in CAD modeling in this paper. A free-form surface model is approximated by a set of flat patches. We describe here an efficient and flexible tool trajectory optimization scheme using T-Bézier curves calculated in a new way from trigonometrical bases. The distance between the spray gun and the free-form surface along the normal vector is varied. Automotive body parts, which are large free-form surfaces, are used to test the scheme. The experimental results show that the trajectory planning algorithm achieves satisfactory performance. This algorithm can also be extended to other applications. PMID:25993663

Surface modeling of workpiece and tool trajectory planning for spray painting robot.

PubMed

Tang, Yang; Chen, Wei

2015-01-01

Automated tool trajectory planning for spray-painting robots is still a challenging problem, especially for a large free-form surface. A grid approximation of a free-form surface is adopted in CAD modeling in this paper. A free-form surface model is approximated by a set of flat patches. We describe here an efficient and flexible tool trajectory optimization scheme using T-Bézier curves calculated in a new way from trigonometrical bases. The distance between the spray gun and the free-form surface along the normal vector is varied. Automotive body parts, which are large free-form surfaces, are used to test the scheme. The experimental results show that the trajectory planning algorithm achieves satisfactory performance. This algorithm can also be extended to other applications.

Efficient high-order structure-preserving methods for the generalized Rosenau-type equation with power law nonlinearity

NASA Astrophysics Data System (ADS)

Cai, Jiaxiang; Liang, Hua; Zhang, Chun

2018-06-01

Based on the multi-symplectic Hamiltonian formula of the generalized Rosenau-type equation, a multi-symplectic scheme and an energy-preserving scheme are proposed. To improve the accuracy of the solution, we apply the composition technique to the obtained schemes to develop high-order schemes which are also multi-symplectic and energy-preserving respectively. Discrete fast Fourier transform makes a significant improvement to the computational efficiency of schemes. Numerical results verify that all the proposed schemes have satisfactory performance in providing accurate solution and preserving the discrete mass and energy invariants. Numerical results also show that although each basic time step is divided into several composition steps, the computational efficiency of the composition schemes is much higher than that of the non-composite schemes.

PSNet: prostate segmentation on MRI based on a convolutional neural network.

PubMed

Tian, Zhiqiang; Liu, Lizhi; Zhang, Zhenfeng; Fei, Baowei

2018-04-01

Automatic segmentation of the prostate on magnetic resonance images (MRI) has many applications in prostate cancer diagnosis and therapy. We proposed a deep fully convolutional neural network (CNN) to segment the prostate automatically. Our deep CNN model is trained end-to-end in a single learning stage, which uses prostate MRI and the corresponding ground truths as inputs. The learned CNN model can be used to make an inference for pixel-wise segmentation. Experiments were performed on three data sets, which contain prostate MRI of 140 patients. The proposed CNN model of prostate segmentation (PSNet) obtained a mean Dice similarity coefficient of [Formula: see text] as compared to the manually labeled ground truth. Experimental results show that the proposed model could yield satisfactory segmentation of the prostate on MRI.

Unsupervised segmentation of lung fields in chest radiographs using multiresolution fractal feature vector and deformable models.

PubMed

Lee, Wen-Li; Chang, Koyin; Hsieh, Kai-Sheng

2016-09-01

Segmenting lung fields in a chest radiograph is essential for automatically analyzing an image. We present an unsupervised method based on multiresolution fractal feature vector. The feature vector characterizes the lung field region effectively. A fuzzy c-means clustering algorithm is then applied to obtain a satisfactory initial contour. The final contour is obtained by deformable models. The results show the feasibility and high performance of the proposed method. Furthermore, based on the segmentation of lung fields, the cardiothoracic ratio (CTR) can be measured. The CTR is a simple index for evaluating cardiac hypertrophy. After identifying a suspicious symptom based on the estimated CTR, a physician can suggest that the patient undergoes additional extensive tests before a treatment plan is finalized.

[Virtual surgical education: experience with medicine and surgery students].

PubMed

Bonavina, Luigi; Mozzi, Enrico; Peracchia, Alberto

2003-01-01

The use of virtual reality simulation is currently being proposed within programs of postgraduate surgical education. The simple tasks that make up an operative procedure can be repeatedly performed until satisfactory execution is achieved, and the errors can be corrected by means of objective assessment. The aim of this study was to evaluate the applicability and the results of structured practice with the LapSim laparoscopic simulator used by undergraduate medical students. A significant reduction in operative time and errors was noted in several tasks (navigation, clipping, etc.). Although the transfer of technical skills to the operating room environment remains to be demonstrated, our research shows that this type of teaching is applicable to undergraduate medical students and in future may become a useful tool for selecting individuals for surgical residency programs.

A Comparison of Artificial Intelligence Methods on Determining Coronary Artery Disease

NASA Astrophysics Data System (ADS)

Babaoğlu, Ismail; Baykan, Ömer Kaan; Aygül, Nazif; Özdemir, Kurtuluş; Bayrak, Mehmet

The aim of this study is to show a comparison of multi-layered perceptron neural network (MLPNN) and support vector machine (SVM) on determination of coronary artery disease existence upon exercise stress testing (EST) data. EST and coronary angiography were performed on 480 patients with acquiring 23 verifying features from each. The robustness of the proposed methods is examined using classification accuracy, k-fold cross-validation method and Cohen's kappa coefficient. The obtained classification accuracies are approximately 78% and 79% for MLPNN and SVM respectively. Both MLPNN and SVM methods are rather satisfactory than human-based method looking to Cohen's kappa coefficients. Besides, SVM is slightly better than MLPNN when looking to the diagnostic accuracy, average of sensitivity and specificity, and also Cohen's kappa coefficient.

Performance assessment of methods for estimation of fractal dimension from scanning electron microscope images.

PubMed

Risović, Dubravko; Pavlović, Zivko

2013-01-01

Processing of gray scale images in order to determine the corresponding fractal dimension is very important due to widespread use of imaging technologies and application of fractal analysis in many areas of science, technology, and medicine. To this end, many methods for estimation of fractal dimension from gray scale images have been developed and routinely used. Unfortunately different methods (dimension estimators) often yield significantly different results in a manner that makes interpretation difficult. Here, we report results of comparative assessment of performance of several most frequently used algorithms/methods for estimation of fractal dimension. To that purpose, we have used scanning electron microscope images of aluminum oxide surfaces with different fractal dimensions. The performance of algorithms/methods was evaluated using the statistical Z-score approach. The differences between performances of six various methods are discussed and further compared with results obtained by electrochemical impedance spectroscopy on the same samples. The analysis of results shows that the performance of investigated algorithms varies considerably and that systematically erroneous fractal dimensions could be estimated using certain methods. The differential cube counting, triangulation, and box counting algorithms showed satisfactory performance in the whole investigated range of fractal dimensions. Difference statistic is proved to be less reliable generating 4% of unsatisfactory results. The performances of the Power spectrum, Partitioning and EIS were unsatisfactory in 29%, 38%, and 75% of estimations, respectively. The results of this study should be useful and provide guidelines to researchers using/attempting fractal analysis of images obtained by scanning microscopy or atomic force microscopy. © Wiley Periodicals, Inc.

Breast cancer screening (breast self-examination, clinical breast exam, and mammography) in women referred to health centers in Tabriz, Iran.

PubMed

Khalili, Azizeh Farshbaf; Shahnazi, Mahnaz

2010-04-01

Breast cancer is the most common cancer and the most common cause of death in Iranian women aged 35-55 years. Breast cancer screening comprises breast self-examination (BSE), clinical breast examination (CBE) and mammography. The study aimed to examine the performance of screening methods among women referring to health centers of Tabriz, Iran. This was a descriptive-analytical research carried out on 400 women aged 20-50 years. The samples were chosen through random multistage sampling among health centers of Tabriz then active records of women. A questionnaire and observational checklist was used to elicit socio-demographic information and performance of women towards breast cancer screening methods. Descriptive and inferential statistics (chi-square and Fisher's exact test) were used to analyze the data. Only 18.8% of women did breast self-examination, 19.1% had clinical breast examination and 3.3% had mammogram. Statistical test showed a significant relationship between performing BSE and educational level, employment, income, number of children, breastfeeding history, breastfeeding quality and family history of breast cancer. There was a significant correlation between performing CBE and history of breast tumor and also, between performing the mammography and family history of breast cancer and history of breast tumor (P < 0.05). The findings showed that the performance of breast cancer screening methods was not satisfactory. Performance in high risk women was very desirable than others. The presentation of imperative education about breast cancer screening methods through health staff especially in pregnancy, post-partum and even in pre marriage counseling periods seems necessary.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adams, W.D.

Passive solar heating was used in a still in which a packed column packed with popped popcorn separates the alcohol and water vapors. The still's performance was not satisfactory, and it is concluded that passive solar heating could have been better used to preheat makeup water for the fermentation process and to maintain proper fermentation temperatures during the winter. (LEW)

Addressing Substandard Teaching in Schools: An Assessment of Principals' Enabling Behavior

ERIC Educational Resources Information Center

Gluck, Arlene

2013-01-01

Researchers estimate that 5-15% of American teachers do not produce the desired student performance. Nevertheless, 99% of U.S. teachers receive satisfactory evaluations annually. Guided by literature on obstacles to effective evaluation, this qualitative case study sought to understand the reasons why principals hesitate to confront substandard…

46 CFR 56.95-10 - Type and extent of examination required.

Code of Federal Regulations, 2010 CFR

2010-10-01

... necessary by the Officer in Charge, Marine Inspection. In such cases a method of testing satisfactory to the... performance, particularly in field welding where conditions such as position, ambient temperatures, and cleanliness are not as readily controlled as in shop welding. It is to be employed whenever an Officer in...

The Use of Techniques of Sensory Evaluation as a Framework for Teaching Experimental Methods.

ERIC Educational Resources Information Center

Bennett, R.; Hamilton, M.

1981-01-01

Describes sensory assessment techniques and conditions for their satisfactory performance, including how they can provide open-ended exercises and advantages as relatively inexpensive and simple methods of teaching experimentation. Experiments described focus on diffusion of salt into potatoes after being cooked in boiled salted water. (Author/JN)

Using Calibrated Exemplars in the Teacher-Assessment of Writing: An Empirical Study

ERIC Educational Resources Information Center

Heldsinger, Sandra A.; Humphry, Stephen M.

2013-01-01

Background: Many in education argue for the importance of incorporating teacher judgements in the assessment and reporting of student performance. Advocates of such an approach are cognisant, though, that obtaining a satisfactory level of consistency in teacher judgements poses a challenge. Purpose: This study investigates the extent to which the…

50 CFR 82.8 - Prosecution of work.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 8 2011-10-01 2011-10-01 false Prosecution of work. 82.8 Section 82.8... (MARINE MAMMAL PROTECTION ACT OF 1972) Administration § 82.8 Prosecution of work. (a) The grantee shall... by the Secretary that satisfactory progress has not been maintained. (b) All work shall be performed...

Tools and Their Uses. Rate Training Manual.

ERIC Educational Resources Information Center

Naval Personnel Program Support Activity, Washington, DC.

One of a series of training manuals prepared for enlisted personnel in the Navy and Naval Reserve, this supplementary manual contains data pertinent to a variety of tools necessary to the satisfactory performance of modern technical equipment used by the Navy. It is designed to help the learner identify tools and fastening devices by their correct…

Effects of physiotherapy treatment for urinary incontinence in patient with multiple sclerosis.

PubMed

Pereira, Carla Maria de Abreu; Castiglione, Mariane; Kasawara, Karina Tamy

2017-07-01

[Purpose] The aim of the study was to evaluate the benefits of physical therapy for urinary incontinence in patients with multiple sclerosis and to verify the impact of urinary incontinence on the patient's quality of life. [Subject and Methods] A case study of a 55-year-old female patient diagnosed with multiple sclerosis and mixed urinary incontinence was conducted. Physical therapy sessions were conducted once a week, in total 15 sessions, making use of targeted functional electrical vaginal stimulation, along with active exercises for the pelvic floor muscles and electrical stimulation of the posterior tibial nerve, behavioral rehabilitation and exercise at home. [Results] After 15 physical therapy sessions, a patient diagnosed with multiple sclerosis and mixed urinary incontinence showed continued satisfactory results after five months. She showed better quality of life, higher strength of pelvic floor muscle and reduced urinary frequency without nocturia and enuresis. [Conclusion] The physical therapy protocol in this patient with multiple sclerosis and mixed urinary incontinence showed satisfactory results reducing urinary incontinence symptomatology and improving the patient's quality of life.

Simultaneous Calibration: A Joint Optimization Approach for Multiple Kinect and External Cameras.

PubMed

Liao, Yajie; Sun, Ying; Li, Gongfa; Kong, Jianyi; Jiang, Guozhang; Jiang, Du; Cai, Haibin; Ju, Zhaojie; Yu, Hui; Liu, Honghai

2017-06-24

Camera calibration is a crucial problem in many applications, such as 3D reconstruction, structure from motion, object tracking and face alignment. Numerous methods have been proposed to solve the above problem with good performance in the last few decades. However, few methods are targeted at joint calibration of multi-sensors (more than four devices), which normally is a practical issue in the real-time systems. In this paper, we propose a novel method and a corresponding workflow framework to simultaneously calibrate relative poses of a Kinect and three external cameras. By optimizing the final cost function and adding corresponding weights to the external cameras in different locations, an effective joint calibration of multiple devices is constructed. Furthermore, the method is tested in a practical platform, and experiment results show that the proposed joint calibration method can achieve a satisfactory performance in a project real-time system and its accuracy is higher than the manufacturer's calibration.

Simultaneous Calibration: A Joint Optimization Approach for Multiple Kinect and External Cameras

PubMed Central

Liao, Yajie; Sun, Ying; Li, Gongfa; Kong, Jianyi; Jiang, Guozhang; Jiang, Du; Cai, Haibin; Ju, Zhaojie; Yu, Hui; Liu, Honghai

2017-01-01

Camera calibration is a crucial problem in many applications, such as 3D reconstruction, structure from motion, object tracking and face alignment. Numerous methods have been proposed to solve the above problem with good performance in the last few decades. However, few methods are targeted at joint calibration of multi-sensors (more than four devices), which normally is a practical issue in the real-time systems. In this paper, we propose a novel method and a corresponding workflow framework to simultaneously calibrate relative poses of a Kinect and three external cameras. By optimizing the final cost function and adding corresponding weights to the external cameras in different locations, an effective joint calibration of multiple devices is constructed. Furthermore, the method is tested in a practical platform, and experiment results show that the proposed joint calibration method can achieve a satisfactory performance in a project real-time system and its accuracy is higher than the manufacturer’s calibration. PMID:28672823

Composite self-expanding bioresorbable prototype stents with reinforced compression performance for congenital heart disease application: Computational and experimental investigation.

PubMed

Zhao, Fan; Xue, Wen; Wang, Fujun; Liu, Laijun; Shi, Haoqin; Wang, Lu

2018-08-01

Stents are vital devices to treat vascular stenosis in pediatric patients with congenital heart disease. Bioresorbable stents (BRSs) have been applied to reduce challenging complications caused by permanent metal stents. However, it remains almost a total lack of BRSs with satisfactory compression performance specifically for children with congenital heart disease, leading to importantly suboptimal effects. In this work, composite bioresorbable prototype stents with superior compression resistance were designed by braiding and annealing technology, incorporating poly (p-dioxanone) (PPDO) monofilaments and polycaprolactone (PCL) multifilament. Stent prototype compression properties were investigated. The results revealed that novel composite prototype stents showed superior compression force compared to the control ones, as well as recovery ability. Furthermore, deformation mechanisms were analyzed by computational simulation, which revealed bonded interlacing points among yarns play an important role. This research presents important clinical implications in bioresorbable stent manufacture and provides further study with an innovative stent design. Copyright © 2018 Elsevier Ltd. All rights reserved.

Local regression type methods applied to the study of geophysics and high frequency financial data

NASA Astrophysics Data System (ADS)

Mariani, M. C.; Basu, K.

2014-09-01

In this work we applied locally weighted scatterplot smoothing techniques (Lowess/Loess) to Geophysical and high frequency financial data. We first analyze and apply this technique to the California earthquake geological data. A spatial analysis was performed to show that the estimation of the earthquake magnitude at a fixed location is very accurate up to the relative error of 0.01%. We also applied the same method to a high frequency data set arising in the financial sector and obtained similar satisfactory results. The application of this approach to the two different data sets demonstrates that the overall method is accurate and efficient, and the Lowess approach is much more desirable than the Loess method. The previous works studied the time series analysis; in this paper our local regression models perform a spatial analysis for the geophysics data providing different information. For the high frequency data, our models estimate the curve of best fit where data are dependent on time.

Imputation of missing data in time series for air pollutants

NASA Astrophysics Data System (ADS)

Junger, W. L.; Ponce de Leon, A.

2015-02-01

Missing data are major concerns in epidemiological studies of the health effects of environmental air pollutants. This article presents an imputation-based method that is suitable for multivariate time series data, which uses the EM algorithm under the assumption of normal distribution. Different approaches are considered for filtering the temporal component. A simulation study was performed to assess validity and performance of proposed method in comparison with some frequently used methods. Simulations showed that when the amount of missing data was as low as 5%, the complete data analysis yielded satisfactory results regardless of the generating mechanism of the missing data, whereas the validity began to degenerate when the proportion of missing values exceeded 10%. The proposed imputation method exhibited good accuracy and precision in different settings with respect to the patterns of missing observations. Most of the imputations obtained valid results, even under missing not at random. The methods proposed in this study are implemented as a package called mtsdi for the statistical software system R.

Accelerating a three-dimensional eco-hydrological cellular automaton on GPGPU with OpenCL

NASA Astrophysics Data System (ADS)

Senatore, Alfonso; D'Ambrosio, Donato; De Rango, Alessio; Rongo, Rocco; Spataro, William; Straface, Salvatore; Mendicino, Giuseppe

2016-10-01

This work presents an effective implementation of a numerical model for complete eco-hydrological Cellular Automata modeling on Graphical Processing Units (GPU) with OpenCL (Open Computing Language) for heterogeneous computation (i.e., on CPUs and/or GPUs). Different types of parallel implementations were carried out (e.g., use of fast local memory, loop unrolling, etc), showing increasing performance improvements in terms of speedup, adopting also some original optimizations strategies. Moreover, numerical analysis of results (i.e., comparison of CPU and GPU outcomes in terms of rounding errors) have proven to be satisfactory. Experiments were carried out on a workstation with two CPUs (Intel Xeon E5440 at 2.83GHz), one GPU AMD R9 280X and one GPU nVIDIA Tesla K20c. Results have been extremely positive, but further testing should be performed to assess the functionality of the adopted strategies on other complete models and their ability to fruitfully exploit parallel systems resources.

Reconfigurable Control Design for the Full X-33 Flight Envelope

NASA Technical Reports Server (NTRS)

Cotting, M. Christopher; Burken, John J.

2001-01-01

A reconfigurable control law for the full X-33 flight envelope has been designed to accommodate a failed control surface and redistribute the control effort among the remaining working surfaces to retain satisfactory stability and performance. An offline nonlinear constrained optimization approach has been used for the X-33 reconfigurable control design method. Using a nonlinear, six-degree-of-freedom simulation, three example failures are evaluated: ascent with a left body flap jammed at maximum deflection; entry with a right inboard elevon jammed at maximum deflection; and landing with a left rudder jammed at maximum deflection. Failure detection and identification are accomplished in the actuator controller. Failure response comparisons between the nominal control mixer and the reconfigurable control subsystem (mixer) show the benefits of reconfiguration. Single aerosurface jamming failures are considered. The cases evaluated are representative of the study conducted to prove the adequate and safe performance of the reconfigurable control mixer throughout the full flight envelope. The X-33 flight control system incorporates reconfigurable flight control in the existing baseline system.

A new coherent demodulation technique for land-mobile satellite communications

NASA Technical Reports Server (NTRS)

Yoshida, Shousei; Tomita, Hideho

1990-01-01

An advanced coherent demodulation technique is described for land mobile satellite (LMS) communications. The proposed technique features a combined narrow/wind band dual open loop carrier phase estimator, which is effectively able to compensate the fast carrier phase fluctuation by fading with sacrificing a phase slip rate. Also included is the realization of quick carrier and clock reacquisition after shadowing by taking open loop structure. Its bit error rate (BER) performance is superior to that of existing detection schemes, showing a BER of 1 x 10(exp -2) at 6.3 dB E sub b/N sub o over the Rician channel with 10 dB C/M and 200 Hz (1/16 modulation rate) fading pitch f sub d for QPSK. The proposed scheme consists of a fast response carrier recovery and a quick bit timing recovery with an interpolation. An experimental terminal model was developed to evaluate its performance at fading conditions. The results are quite satisfactory, giving prospects for future LMS applications.

Super non-linear RRAM with ultra-low power for 3D vertical nano-crossbar arrays.

PubMed

Luo, Qing; Xu, Xiaoxin; Liu, Hongtao; Lv, Hangbing; Gong, Tiancheng; Long, Shibing; Liu, Qi; Sun, Haitao; Banerjee, Writam; Li, Ling; Gao, Jianfeng; Lu, Nianduan; Liu, Ming

2016-08-25

Vertical crossbar arrays provide a cost-effective approach for high density three-dimensional (3D) integration of resistive random access memory. However, an individual selector device is not allowed to be integrated with the memory cell separately. The development of V-RRAM has impeded the lack of satisfactory self-selective cells. In this study, we have developed a high performance bilayer self-selective device using HfO2 as the memory switching layer and a mixed ionic and electron conductor as the selective layer. The device exhibits high non-linearity (>10(3)) and ultra-low half-select leakage (<0.1 pA). A four layer vertical crossbar array was successfully demonstrated based on the developed self-selective device. High uniformity, ultra-low leakage, sub-nA operation, self-compliance, and excellent read/write disturbance immunity were achieved. The robust array level performance shows attractive potential for low power and high density 3D data storage applications.

Electric field feedback for Magneto(elasto)Electric magnetometer development

NASA Astrophysics Data System (ADS)

Yang, M.-T.; Zhuang, X.; Sing, M. Lam Chok; Dolabdjian, C.; Finkel, P.; Li, J.; Viehland, D.

2017-12-01

Magneto(elasto)Electric (ME) sensors based on magnetostrictive-piezoelectric composites have been investigated to evaluate their performances to sense a magnetic signal. Previous results have shown that the dielectric loss noise in the piezoelectric layer exhibits as the dominant intrinsic noise at low frequencies, which limits the sensor performances. Also, it has intrinsically no DC capability. To avoid a part of this limitation, modulation detection methods are evaluated through a frequency up-conversion technique [1-4]. Moreover, classical magnetic field feedback techniques can be used to increase the dynamic range, the sensing stability and the system linearity, too. In this paper, we propose a new method to feedback the system by using both the magneto-capacitance modulation and an electric field feedback technique. Our development shows the feasibility of the method and the results match with the theoretical description and material properties. Even if the present results are not totally satisfactory, they give the proof of concept and yield a way for the development of very low power magnetometers.

Clinical performance of IPS-Empress 2 ceramic crowns inserted by general dental practitioners.

PubMed

Mansour, Yasar F; Al-Omiri, Mahmoud K; Khader, Yousef Saleh; Al-Wahadni, Ahed

2008-05-01

The aim of this study was to evaluate the clinical performance of IPS-Empress 2(R) all-ceramic crowns placed by general dental practitioners. Eighty-two IPS-Empress 2 crowns placed in 64 patients (27 females and 37 males) were evaluated. These crowns had been in place for 15.2 to 57.2 months (mean 25.3 months, SD=9.3). Survival analysis was conducted using the Kaplan-Meier method. Of the 82 crowns 93.9% were rated satisfactory. In terms of the integrity of the restorations, fracture was observed in three crowns and two showed a crack upon transillumination. Five crowns were rated unsatisfactory for color match; one for marginal adaptation; and none for discoloration, secondary caries, or sensitivity. IPS-Empress 2(R) is a suitable material to fabricate all-ceramic crowns; when these all-ceramic crowns were inserted by general dental practitioners, they functioned satisfactorily with low failure rates during an observation period ranging between 15.2 to 57.2 months.

Discrimination of red and white rice bran from Indonesia using HPLC fingerprint analysis combined with chemometrics.

PubMed

Sabir, Aryani; Rafi, Mohamad; Darusman, Latifah K

2017-04-15

HPLC fingerprint analysis combined with chemometrics was developed to discriminate between the red and the white rice bran grown in Indonesia. The major component in rice bran is γ-oryzanol which consisted of 4 main compounds, namely cycloartenol ferulate, cyclobranol ferulate, campesterol ferulate and β-sitosterol ferulate. Separation of these four compounds along with other compounds was performed using C18 and methanol-acetonitrile with gradient elution system. By using these intensity variations, principal component and discriminant analysis were performed to discriminate the two samples. Discriminant analysis was successfully discriminated the red from the white rice bran with predictive ability of the model showed a satisfactory classification for the test samples. The results of this study indicated that the developed method was suitable as quality control method for rice bran in terms of identification and discrimination of the red and the white rice bran. Copyright © 2016 Elsevier Ltd. All rights reserved.

Authentication and Quantitation of Fraud in Extra Virgin Olive Oils Based on HPLC-UV Fingerprinting and Multivariate Calibration

PubMed Central

Carranco, Núria; Farrés-Cebrián, Mireia; Saurina, Javier

2018-01-01

High performance liquid chromatography method with ultra-violet detection (HPLC-UV) fingerprinting was applied for the analysis and characterization of olive oils, and was performed using a Zorbax Eclipse XDB-C8 reversed-phase column under gradient elution, employing 0.1% formic acid aqueous solution and methanol as mobile phase. More than 130 edible oils, including monovarietal extra-virgin olive oils (EVOOs) and other vegetable oils, were analyzed. Principal component analysis results showed a noticeable discrimination between olive oils and other vegetable oils using raw HPLC-UV chromatographic profiles as data descriptors. However, selected HPLC-UV chromatographic time-window segments were necessary to achieve discrimination among monovarietal EVOOs. Partial least square (PLS) regression was employed to tackle olive oil authentication of Arbequina EVOO adulterated with Picual EVOO, a refined olive oil, and sunflower oil. Highly satisfactory results were obtained after PLS analysis, with overall errors in the quantitation of adulteration in the Arbequina EVOO (minimum 2.5% adulterant) below 2.9%. PMID:29561820

Twenty-year survival analysis in total knee arthroplasty by a single surgeon.

PubMed

Bae, Dae Kyung; Song, Sang Jun; Park, Man Jun; Eoh, Jae Hyung; Song, Jong Hoon; Park, Cheol Hee

2012-08-01

Between January 1988 and December 2006, a total of 3014 primary total knee arthroplasties (TKAs) in 2042 patients were performed, and survivorship analysis was performed. Survivorship analysis showed a 10-year survival of 93.8% and a 20-year survival of 70.9%. There was no significant difference in the survival rate according to sex and diagnosis (P = .142 and .443, respectively). The survival rate was higher in the patients older than 60 years (P < .001). The survival rate of Total Condylar IV (TC-IV) was higher than that of Ortholoc (Dow Corning Wright Medical, Arlington, Tenn) (P < .001). Total knee arthroplasty results in satisfactory long-term survival rates. However, the survival rate decreases over time. The risk of requiring revision TKA was related to age and type of implants. Careful consideration is necessary to decide the time for TKA and select type of implants. Crown Copyright © 2012. Published by Elsevier Inc. All rights reserved.

Fast screening and quantitation of microcystins in microalgae dietary supplement products and water by liquid chromatography coupled to time of flight mass spectrometry.

PubMed

Ortelli, Didier; Edder, Patrick; Cognard, Emmanuelle; Jan, Philippe

2008-06-09

Cyanobacteria, commonly called "blue-green algae", may accumulate in surface water supplies as "blooms" and may concentrate on the surface as blue-green "scums". Some species of cyanobacteria produce toxins and are of relevance to water supplies and to microalgae dietary supplements. To ensure the safety of drinking water and blue-green algae products, analyses are the only way to determine the presence or absence of toxins. This paper shows the use of ultra performance liquid chromatography (UPLC) coupled to orthogonal acceleration time of flight (TOF) mass spectrometry for the detection and quantitation of microcystins. The method presented is very sensitive, simple, fast, robust and did not require fastidious clean-up step. Limits of detection of 0.1 microg L(-1) in water and 0.1-0.2 microg g(-1) in microalgae samples were achieved. Method performances were satisfactory and appropriate for monitoring of water and dietary supplements. The method was applied in routine to samples taken from Swiss market or buy on internet website. Among 19 samples, six showed the presence of microcystins LR and LA at harmful levels.

Heterojunction fully depleted SOI-TFET with oxide/source overlap

NASA Astrophysics Data System (ADS)

Chander, Sweta; Bhowmick, B.; Baishya, S.

2015-10-01

In this work, a hetero-junction fully depleted (FD) Silicon-on-Insulator (SOI) Tunnel Field Effect Transistor (TFET) nanostructure with oxide overlap on the Germanium-source region is proposed. Investigations using Synopsys Technology Computer Aided Design (TCAD) simulation tools reveal that the simple oxide overlap on the Germanium-source region increases the tunneling area as well as the tunneling current without degrading the band-to-band tunneling (BTBT) and improves the device performance. More importantly, the improvement is independent of gate overlap. Simulation study shows improvement in ON current, subthreshold swing (SS), OFF current, ION/IOFF ration, threshold voltage and transconductance. The proposed device with hafnium oxide (HfO2)/Aluminium Nitride (AlN) stack dielectric material offers an average subthreshold swing of 22 mV/decade and high ION/IOFF ratio (∼1010) at VDS = 0.4 V. Compared to conventional TFET, the Miller capacitance of the device shows the enhanced performance. The impact of the drain voltage variation on different parameters such as threshold voltage, subthreshold swing, transconductance, and ION/IOFF ration are also found to be satisfactory. From fabrication point of view also it is easy to utilize the existing CMOS process flows to fabricate the proposed device.

Design of an iterative auto-tuning algorithm for a fuzzy PID controller

NASA Astrophysics Data System (ADS)

Saeed, Bakhtiar I.; Mehrdadi, B.

2012-05-01

Since the first application of fuzzy logic in the field of control engineering, it has been extensively employed in controlling a wide range of applications. The human knowledge on controlling complex and non-linear processes can be incorporated into a controller in the form of linguistic terms. However, with the lack of analytical design study it is becoming more difficult to auto-tune controller parameters. Fuzzy logic controller has several parameters that can be adjusted, such as: membership functions, rule-base and scaling gains. Furthermore, it is not always easy to find the relation between the type of membership functions or rule-base and the controller performance. This study proposes a new systematic auto-tuning algorithm to fine tune fuzzy logic controller gains. A fuzzy PID controller is proposed and applied to several second order systems. The relationship between the closed-loop response and the controller parameters is analysed to devise an auto-tuning method. The results show that the proposed method is highly effective and produces zero overshoot with enhanced transient response. In addition, the robustness of the controller is investigated in the case of parameter changes and the results show a satisfactory performance.

Performance indicators for quality in surgical and laboratory services at Muhimbili National Hospital (MNH) in Tanzania.

PubMed

Mbembati, Naboth A; Mwangu, Mugwira; Muhondwa, Eustace P Y; Leshabari, Melkizedek M

2008-04-01

Muhimbili National Hospital (MNH), a teaching and national referral hospital, is undergoing major reforms to improve the quality of health care. We performed a retrospective descriptive study using a set of performance indicators for the surgical and laboratory services of MNH in years 2001 and 2002, to help monitor and evaluate the impact of reforms on the quality of health care during and after the reform process. Hospital records were reviewed and information recorded for planned and postponed operations, laboratory equipment, reagents, laboratory tests and quality assurance programmes. In the year 2001 a total of 4332 non-emergency operations were planned, 3313 operations were performed and 1019 (23.5%) operations were postponed. In the year 2002, 4301 non-emergency operations were planned, 3046 were performed and 1255 (29%) were postponed. The most common reasons for operation postponement were "time-barred", interference by emergency operations, no show of patients and inoperable anaesthetic machines. Equipment problems and supply and staff shortages together accounted for one quarter of postponements. In the laboratory, a lack of equipment prevented some tests, but quality assurance was performed for most tests. Current surgical services at MNH are inadequate; operating theatres require modern, functioning equipment and adequate supplies of consumables to provide satisfactory care.

An assessment of the use of antimisting fuel in turbofan engines

NASA Technical Reports Server (NTRS)

Fiorentino, A.; Desaro, R.; Franz, T.

1980-01-01

The effects of antimisting kerosene on the performance of the components from the fuel system and the combustor of a JT8D aircraft engine were evaluated. The problems associated with antimisting kerosene were identified and the extent of shearing or degradation required to allow the engine components to achieve satisfactory operation were determined. The performance of the combustor was assessed in a high pressure facility and in an altitude relight/cold ignition facility. The performance of the fuel pump and control system was evaluated in an open loop simulation.

38 CFR 21.7153 - Progress and conduct.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Bill-Active Duty) Pursuit of Courses § 21.7153 Progress and conduct. (a) Satisfactory pursuit of... must maintain satisfactory progress. VA will discontinue educational assistance if the individual does not maintain satisfactory progress. Progress is unsatisfactory if the individual does not...

Optical coherence tomography angiography offers comprehensive evaluation of skin optical clearing in vivo by quantifying optical properties and blood flow imaging simultaneously

NASA Astrophysics Data System (ADS)

Guo, Li; Shi, Rui; Zhang, Chao; Zhu, Dan; Ding, Zhihua; Li, Peng

2016-08-01

Tissue optical clearing (TOC) is helpful for reducing scattering and enhancing the penetration depth of light, and shows promising potential in optimizing optical imaging performances. A mixture of fructose with PEG-400 and thiazone (FPT) is used as an optical clearing agent in mouse dorsal skin and evaluated with OCT angiography (Angio-OCT) by quantifying optical properties and blood flow imaging simultaneously. It is observed that FPT leads to an improved imaging performance for the deeper tissues. The imaging performance improvement is most likely caused by the FPT-induced dehydration of skin, and the reduction of scattering coefficient (more than ˜40.5%) and refractive-index mismatching (more than ˜25.3%) in the superficial (epidermal, dermal, and hypodermal) layers. A high correlation (up to ˜90%) between the relative changes in refractive-index mismatching and Angio-OCT signal strength is measured. The optical clearing rate is ˜5.83×10-5 cm/s. In addition, Angio-OCT demonstrates enhanced performance in imaging cutaneous hemodynamics with satisfactory spatiotemporal resolution and contrast when combined with TOC, which exhibits a powerful practical application in studying microcirculation.

Performance Evaluation of the Sysmex CS-5100 Automated Coagulation Analyzer.

PubMed

Chen, Liming; Chen, Yu

2015-01-01

Coagulation testing is widely applied clinically, and laboratories increasingly demand automated coagulation analyzers with short turn-around times and high-throughput. The purpose of this study was to evaluate the performance of the Sysmex CS-5100 automated coagulation analyzer for routine use in a clinical laboratory. The prothrombin time (PT), international normalized ratio (INR), activated partial thromboplastin time (APTT), fibrinogen (Fbg), and D-dimer were compared between the Sysmex CS-5100 and Sysmex CA-7000 analyzers, and the imprecision, comparison, throughput, STAT function, and performance for abnormal samples were measured in each. The within-run and between-run coefficients of variation (CV) for the PT, APTT, INR, and D-dimer analyses showed excellent results both in the normal and pathologic ranges. The correlation coefficients between the Sysmex CS-5100 and Sysmex CA-7000 were highly correlated. The throughput of the Sysmex CS-5100 was faster than that of the Sysmex CA-7000. There was no interference at all by total bilirubin concentrations and triglyceride concentrations in the Sysmex CS-5100 analyzer. We demonstrated that the Sysmex CS-5100 performs with satisfactory imprecision and is well suited for coagulation analysis in laboratories processing large sample numbers and icteric and lipemic samples.

Flight Test of a Propulsion-Based Emergency Control System on the MD-11 Airplane with Emphasis on the Lateral Axis

NASA Technical Reports Server (NTRS)

Burken, John J.; Burcham, Frank W., Jr.; Maine, Trindel A.; Feather, John; Goldthorpe, Steven; Kahler, Jeffrey A.

1996-01-01

A large, civilian, multi-engine transport MD-11 airplane control system was recently modified to perform as an emergency backup controller using engine thrust only. The emergency backup system, referred to as the propulsion-controlled aircraft (PCA) system, would be used if a major primary flight control system fails. To allow for longitudinal and lateral-directional control, the PCA system requires at least two engines and is implemented through software modifications. A flight-test program was conducted to evaluate the PCA system high-altitude flying characteristics and to demonstrate its capacity to perform safe landings. The cruise flight conditions, several low approaches and one landing without any aerodynamic flight control surface movement, were demonstrated. This paper presents results that show satisfactory performance of the PCA system in the longitudinal axis. Test results indicate that the lateral-directional axis of the system performed well at high attitude but was sluggish and prone to thermal upsets during landing approaches. Flight-test experiences and test techniques are also discussed with emphasis on the lateral-directional axis because of the difficulties encountered in flight test.

Prediction of practical performance in preclinical laboratory courses - the return of wire bending for admission of dental students in Hamburg.

PubMed

Kothe, Christian; Hissbach, Johanna; Hampe, Wolfgang

2014-01-01

Although some recent studies concluded that dexterity is not a reliable predictor of performance in preclinical laboratory courses in dentistry, they could not disprove earlier findings which confirmed the worth of manual dexterity tests in dental admission. We developed a wire bending test (HAM-Man) which was administered during dental freshmen's first week in 2008, 2009, and 2010. The purpose of our study was to evaluate if the HAM-Man is a useful selection criterion additional to the high school grade point average (GPA) in dental admission. Regression analysis revealed that GPA only accounted for a maximum of 9% of students' performance in preclinical laboratory courses, in six out of eight models the explained variance was below 2%. The HAM-Man incrementally explained up to 20.5% of preclinical practical performance over GPA. In line with findings from earlier studies the HAM-Man test of manual dexterity showed satisfactory incremental validity. While GPA has a focus on cognitive abilities, the HAM-Man reflects learning of unfamiliar psychomotor skills, spatial relationships, and dental techniques needed in preclinical laboratory courses. The wire bending test HAM-Man is a valuable additional selection instrument for applicants of dental schools.

Standardization and validation of the body weight adjustment regression equations in Olympic weightlifting.

PubMed

Kauhanen, Heikki; Komi, Paavo V; Häkkinen, Keijo

2002-02-01

The problems in comparing the performances of Olympic weightlifters arise from the fact that the relationship between body weight and weightlifting results is not linear. In the present study, this relationship was examined by using a nonparametric curve fitting technique of robust locally weighted regression (LOWESS) on relatively large data sets of the weightlifting results made in top international competitions. Power function formulas were derived from the fitted LOWESS values to represent the relationship between the 2 variables in a way that directly compares the snatch, clean-and-jerk, and total weightlifting results of a given athlete with those of the world-class weightlifters (golden standards). A residual analysis of several other parametric models derived from the initial results showed that they all experience inconsistencies, yielding either underestimation or overestimation of certain body weights. In addition, the existing handicapping formulas commonly used in normalizing the performances of Olympic weightlifters did not yield satisfactory results when applied to the present data. It was concluded that the devised formulas may provide objective means for the evaluation of the performances of male weightlifters, regardless of their body weights, ages, or performance levels.

Measurement of Turbulent Pressure and Temperature Fluctuations in a Gas Turbine Combustor

NASA Technical Reports Server (NTRS)

Passaro, Andrea; LaGraff, John E.; Oldfield, Martin L. G.; Biagioni, Leonardo; Moss, Roger W.; Battelle, Ryan T.; Povinelli, Louis A. (Technical Monitor)

2003-01-01

The present research concerns the development of high-frequency pressure and temperature probes and related instrumentation capable of performing spectral characterization of unsteady pressure and temperature fluctuations over the 0.05 20 kHz range, at the exit of a gas turbine combustor operating at conditions close to nominal ones for large power generation turbomachinery. The probes used a transient technique pioneered at Oxford University; in order to withstand exposure to the harsh environment the probes were fitted on a rapid injection and cooling system jointly developed by Centrospazio CPR and Syracuse University. The experimental runs were performed on a large industrial test rig being operated by ENEL Produzione. The achieved results clearly show the satisfactory performance provided by this diagnostic tool, even though the poor location of the injection port prevented the tests from yielding more insight of the core flow turbulence characteristics. The pressure and temperature probes survived several dozen injections in the combustor hot jet, while consistently providing the intended high frequency performance. The apparatus was kept connected to the combustor during long duration firings, operating as an unobtrusive, self contained, piggy-back experiment: high frequency flow samplings were remotely recorded at selected moments corresponding to different combustor operating conditions.

Hierarchically mesostructured porous TiO2 hollow nanofibers for high performance glucose biosensing.

PubMed

Guo, Qiaohui; Liu, Lijuan; Zhang, Man; Hou, Haoqing; Song, Yonghai; Wang, Huadong; Zhong, Baoying; Wang, Li

2017-06-15

Effective immobilization of enzymes on an electrode surface is of great importance for biosensor development, but it still remains challenging because enzymes tend to denaturation and/or form close-packed structures. In this work, a free-standing TiO 2 hollow nanofibers (HNF-TiO 2 ) was successfully prepared by a simple and scalable electrospun nanofiber film template-assisted sol-gel method, and was further explored for glucose oxidase (GOD) immobilization and biosensing. This porous and nanotubular HNF-TiO 2 provides a well-defined hierarchical nanostructure for GOD loading, and the fine TiO 2 nanocrystals facilitate direct electron transfer from GOD to the electrode, also the strong interaction between GOD and HNF-TiO 2 greatly enhances the stability of the biosensor. The as-prepared glucose biosensors show good sensing performances both in O 2 -free and O 2 -containing conditions with good sensitivity, satisfactory selectivity, long-term stability and sound reliability. The novel textile formation, porous and hierarchically mesostructured nature of HNF-TiO 2 with excellent analytical performances make it a superior platform for the construction of high-performance glucose biosensors. Copyright © 2016 Elsevier B.V. All rights reserved.

A modelling study of the event-based retention performance of green roof under the hot-humid tropical climate in Kuching.

PubMed

Chai, C T; Putuhena, F J; Selaman, O S

2017-12-01

The influences of climate on the retention capability of green roof have been widely discussed in existing literature. However, knowledge on how the retention capability of green roof is affected by the tropical climate is limited. This paper highlights the retention performance of the green roof situated in Kuching under hot-humid tropical climatic conditions. Using the green roof water balance modelling approach, this study simulated the hourly runoff generated from a virtual green roof from November 2012 to October 2013 based on past meteorological data. The result showed that the overall retention performance was satisfactory with a mean retention rate of 72.5% from 380 analysed rainfall events but reduced to 12.0% only for the events that potentially trigger the occurrence of flash flood. By performing the Spearman rank's correlation analysis, it was found that the rainfall depth and mean rainfall intensity, individually, had a strong negative correlation with event retention rate, suggesting that the retention rate increases with decreased rainfall depth. The expected direct relationship between retention rate and antecedent dry weather period was found to be event size dependent.

Research on the feature extraction and pattern recognition of the distributed optical fiber sensing signal

NASA Astrophysics Data System (ADS)

Wang, Bingjie; Sun, Qi; Pi, Shaohua; Wu, Hongyan

2014-09-01

In this paper, feature extraction and pattern recognition of the distributed optical fiber sensing signal have been studied. We adopt Mel-Frequency Cepstral Coefficient (MFCC) feature extraction, wavelet packet energy feature extraction and wavelet packet Shannon entropy feature extraction methods to obtain sensing signals (such as speak, wind, thunder and rain signals, etc.) characteristic vectors respectively, and then perform pattern recognition via RBF neural network. Performances of these three feature extraction methods are compared according to the results. We choose MFCC characteristic vector to be 12-dimensional. For wavelet packet feature extraction, signals are decomposed into six layers by Daubechies wavelet packet transform, in which 64 frequency constituents as characteristic vector are respectively extracted. In the process of pattern recognition, the value of diffusion coefficient is introduced to increase the recognition accuracy, while keeping the samples for testing algorithm the same. Recognition results show that wavelet packet Shannon entropy feature extraction method yields the best recognition accuracy which is up to 97%; the performance of 12-dimensional MFCC feature extraction method is less satisfactory; the performance of wavelet packet energy feature extraction method is the worst.

Performance of the Italian version of the subjective well-being under neuroleptic (SWN) scale in schizophrenic outpatients.

PubMed

Balestrieri, M; Giaroli, G; Mazzi, M; Bellantuono, C

2006-05-01

Several studies indicate that subjective experience toward antipsychotic drugs (APs) in schizophrenic patients is a key factor in ensuring a smooth recovery from the illness. The principal aim of this study was to establish the psychometric performance of the Subjective Well-being Under Neuroleptic (SWN) scale in its Italian version and to assess, through the SWN scale, the subjective experience of stabilized psychotic outpatients in maintenance with APs. The original short version of SWN, consisting of 20 items, was back translated, and a focus group was also conducted to better improve the comprehension of the scale. The results showed a good performance of the Italian version of the SWN as documented by the internal consistency (Cronbach's alpha; 0.85). A satisfactory subjective experience was reported in the sample of schizophrenic outpatients interviewed (SWN mean total score: 84.95, SD: 17.5). The performance of the SWN scale in the present study was very similar to that reported by Naber et al. in the original validation study. Large multi-center studies are needed to better establish differences in the subjective experience of schizophrenic patients treated with first- and second-generation APs.

Introducing a design exigency to promote student learning through assessment: A case study.

PubMed

Grealish, Laurie A; Shaw, Julie M

2018-02-01

Assessment technologies are often used to classify student and newly qualified nurse performance as 'pass' or 'fail', with little attention to how these decisions are achieved. Examining the design exigencies of classification technologies, such as performance assessment technologies, provides opportunities to explore flexibility and change in the process of using those technologies. Evaluate an established assessment technology for nursing performance as a classification system. A case study analysis that is focused on the assessment approach and a priori design exigencies of performance assessment technology, in this case the Australian Nursing Standards Assessment Tool 2016. Nurse assessors are required to draw upon their expertise to judge performance, but that judgement is described as a source of bias, creating confusion. The definition of satisfactory performance is 'ready to enter practice'. To pass, the performance on each criterion must be at least satisfactory, indicating to the student that no further improvement is required. The Australian Nursing Standards Assessment Tool 2016 does not have a third 'other' category, which is usually found in classification systems. Introducing a 'not yet competent' category and creating a two-part, mixed methods assessment process can improve the Australian Nursing Standards Assessment Tool 2016 assessment technology. Using a standards approach in the first part, judgement is valued and can generate learning opportunities across a program. Using a measurement approach in the second part, student performance can be 'not yet competent' but still meet criteria for year level performance and a graded pass. Subjecting the Australian Nursing Standards Assessment Tool 2016 assessment technology to analysis as a classification system provides opportunities for innovation in design. This design innovation has the potential to support students who move between programs and clinicians who assess students from different universities. Copyright © 2017 Elsevier Ltd. All rights reserved.

Eastern Airlines LOFT program

NASA Technical Reports Server (NTRS)

Beach, B. E.

1981-01-01

Beginning with scenario design and development issues, Eastern Airlines committed itself to the full four-hour LOFT training format without the additional time for specific maneuvers. Abnormals and emergency conditions, pacing, and quiet periods are included in the scenarios which are written for the instructor to follow verbatim. Simulator capabilities, performance assessment; training vs. checking; crew composition and scheduling; satisfactory completion; the use of video performance printouts; the number of instructors; instructor training and standardization; and initial, transition, and upgrade training are discussed.

Pilot production and testing of high efficiency wraparound contact solar cells

NASA Technical Reports Server (NTRS)

Gillanders, M.

1981-01-01

Modifications were made to the process sequence until a device capable of high performance and satisfactory processing yields could be fabricated on a production line. Pilot production resulted in a 2 x 4 cm screen printed dielectric wraparound contact solar cell with average 28 C, Air Mass Zero (AMO) conversion efficiencies of 14.2% and reasonable process yields. This high performance was obtained with two different back contact configurations, making the device acceptable for many applications.

An optimized inverse modelling method for determining the location and strength of a point source releasing airborne material in urban environment

NASA Astrophysics Data System (ADS)

Efthimiou, George C.; Kovalets, Ivan V.; Venetsanos, Alexandros; Andronopoulos, Spyros; Argyropoulos, Christos D.; Kakosimos, Konstantinos

2017-12-01

An improved inverse modelling method to estimate the location and the emission rate of an unknown point stationary source of passive atmospheric pollutant in a complex urban geometry is incorporated in the Computational Fluid Dynamics code ADREA-HF and presented in this paper. The key improvement in relation to the previous version of the method lies in a two-step segregated approach. At first only the source coordinates are analysed using a correlation function of measured and calculated concentrations. In the second step the source rate is identified by minimizing a quadratic cost function. The validation of the new algorithm is performed by simulating the MUST wind tunnel experiment. A grid-independent flow field solution is firstly attained by applying successive refinements of the computational mesh and the final wind flow is validated against the measurements quantitatively and qualitatively. The old and new versions of the source term estimation method are tested on a coarse and a fine mesh. The new method appeared to be more robust, giving satisfactory estimations of source location and emission rate on both grids. The performance of the old version of the method varied between failure and success and appeared to be sensitive to the selection of model error magnitude that needs to be inserted in its quadratic cost function. The performance of the method depends also on the number and the placement of sensors constituting the measurement network. Of significant interest for the practical application of the method in urban settings is the number of concentration sensors required to obtain a ;satisfactory; determination of the source. The probability of obtaining a satisfactory solution - according to specified criteria -by the new method has been assessed as function of the number of sensors that constitute the measurement network.

Surgical treatment of primary gynecomastia in children and adolescents.

PubMed

Fischer, Sebastian; Hirsch, Tobias; Hirche, Christoph; Kiefer, Jurij; Kueckelhaus, Maximilian; Germann, Günter; Reichenberger, Matthias A

2014-06-01

Idiopathic gynecomastia is a common diagnosis in children and adolescents. Though medical treatments reveal potentially harmful side effects, surgical interventions are performable in numerous techniques. In children and adolescents, only minimal evidence exists. This retrospective study presents our experiences with two common surgical techniques, namely subcutaneous mastectomy and combination with liposuction. This retrospective study included all patients <18 years who underwent surgery due to idiopathic gynecomastia. Height, weight and grade of gynecomastia according to Simon's classification before surgery were reviewed in all patients' files. Additionally, duration of surgery, inpatient stay and postoperative complications were documented. Follow-up examinations were performed with assessment of scar formation, numbness and retraction of the nipple region. Furthermore, patients were asked to report on general satisfaction with surgery (satisfactory/not satisfactory) and esthetic outcome on a numeric scale (1 = good, 6 = bad). 37 patients underwent surgery for verified idiopathic gynecomastia. Grade of gynecomastia was I° in 13.5% (n = 5), II° in 40.5% (n = 15) and III° in 46% (n = 17) of cases. Subcutaneous mastectomy was applied in 11 patients (group I, 30%) and both subcutaneous mastectomy and liposuction in 26 patients (group II, 70.3%). Postoperative complications occurred in two patients. Long-term follow-up was performed in 32 patients after a median of 34 months (range 6-96 months). Hypertrophic scar formation was seen in one patient (3%) and nipple retraction in two patients (5%). Recurrence of gynecomastia occurred in two patients (5%). Patient rating was satisfactory in 9% of cases and esthetic outcome was received with a median of 2.0 (1-5). In comparing both surgical techniques, combination of mastectomy and liposuction revealed better results in every measure except for surgical duration (median 73 vs. 90 min). Surgical correction of gynecomastia remains a purely elective intervention. In contrast to adults, skin in children and adolescents provides high retractability. Therefore, open reduction combined with minimally invasive liposuction was proven useful.

Cardiovascular health knowledge, attitude and practice/behaviour in an urbanising community of Nepal: a population-based cross-sectional study from Jhaukhel-Duwakot Health Demographic Surveillance Site

PubMed Central

Vaidya, Abhinav; Aryal, Umesh Raj; Krettek, Alexandra

2013-01-01

Objectives This study determined the knowledge, attitude and practice/behaviour of cardiovascular health in residents of a semiurban community of Nepal. Design To increase the understanding of knowledge, attitude and practice/behaviour towards cardiovascular health, we conducted in-home interviews using a questionnaire based on the WHO STEPwise approach to surveillance and other resources, scoring all responses. We also recorded blood pressure and took anthropometric measurements. Setting Our study was conducted as part of the Heart-Health-Associated Research and Dissemination in the Community project in the Jhaukhel-Duwakot Health Demographic Surveillance Site in two urbanising villages near Kathmandu. Participants The study population included 777 respondents from six randomly selected clusters in both villages. Results Seventy per cent of all participants were women and 26.9% lacked formal education. The burden of cardiovascular risk factors was high; 20.1% were current smokers, 43.3% exhibited low physical activity and 21.6% were hypertensive. Participants showed only poor knowledge of heart disease causes; 29.7% identified hypertension and 11% identified overweight and physical activity as causes, whereas only 2.2% identified high blood sugar as causative. Around 60% of respondents did not know any heart attack symptoms compared with 20% who knew 2–4 symptoms. Median percentage scores for knowledge, attitude and practice/behaviour were 79.3, 74.3 and 48, respectively. Nearly 44% of respondents had insufficient knowledge and less than 20% had highly satisfactory knowledge. Among those with highly satisfactory knowledge, only 14.7% had a highly satisfactory attitude and 19.5% and 13.9% had satisfactory and highly satisfactory practices, respectively. Conclusions Our study demonstrates a gap between cardiovascular health knowledge, attitude and practice/behaviour in a semiurban community in a low-income nation, even among those already affected by cardiovascular disease. PMID:24157816

Can radiological results be surrogate markers of functional outcome in distal radial extra-articular fractures?

PubMed

Kumar, Skand; Penematsa, Subbaraju; Sadri, Maziar; Deshmukh, Subodh C

2008-08-01

The purpose of this study was to evaluate the relationship between radiological and functional results in patients with extra-articular fractures of the distal radius. We conducted a prospective study of radiological and functional assessment in 95 consecutively selected extra-articular distal radius fractures. There were two patient groups: more than 60 and less than 60 years of age. The final fracture union radiographs were analysed for their functional outcome using the Michigan Hand Outcomes Questionnaire (MHQ) and the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire. In patients with acceptable radiological results, 62% (MHQ group) and 72% (DASH group) of patients had satisfactory functional outcome. Analysing patients with satisfactory functional results, 56% (MHQ group) and 59% (DASH group) had satisfactory radiological results. There was a higher proportion of patients with better functional results, despite poor radiological results, in both of the age groups. There was a statistically significant correlation between satisfactory radial tilt and functional outcome in the younger patients. In the older age group, patients with satisfactory radiological results had satisfactory functional outcome (p<0.05). However, in the older age group, satisfactory functional results were achieved, despite unsatisfactory radiological results.

31 CFR 515.543 - Proof of origin.

Code of Federal Regulations, 2010 CFR

2010-07-01

... of goods of Cuban origin are generally not issued unless the applicant submits satisfactory... constitute satisfactory proof varies depending upon the facts of the particular case, it is not possible to... satisfactory proof of origin. Independent corroborating documentary evidence, such as insurance documents...

Preliminary Flight Tests of the N.A.C.A. Roots Type Aircraft Engine Supercharger

NASA Technical Reports Server (NTRS)

Gardiner, Arthur W; Reid, Elliott G

1928-01-01

An investigation of the suitability of the N.A.C.A. Roots type aircraft engine supercharger to flight-operating conditions, as determined the effects of the use of the supercharger upon engine operation and airplane performance, is described in this report. Attention was concentrated on the operation of the engine-supercharger unit and on the improvement of climbing ability; some information concerning high speeds at altitude was obtained. The supercharger was found to be satisfactory under flight-operating conditions. Although two failures occurred during the tests, the causes of both were minor and have been eliminated. Careful examination of the engines revealed no detrimental effects which could be attributed to supercharging. Marked improvements in climbing ability and high speeds at altitude were effected. It was also found that the load which could be carried to a given moderate or high altitude in a fixed time was considerably augmented. A slight sacrifice of low-altitude performance was necessitated, however, by the use of a fixed-pitch propeller. From a consideration of the very satisfactory flight performance of the Roots supercharger and of its inherent advantages, it is concluded that this type is particularly attractive for use in certain classes of commercial airplanes and in a number of military types.

Removal of organic micropollutants from drinking water by a novel electro-Fenton filter: Pilot-scale studies.

PubMed

Plakas, Konstantinos V; Sklari, Stella D; Yiankakis, Dimitrios A; Sideropoulos, Georgios Th; Zaspalis, Vassilis T; Karabelas, Anastasios J

2016-03-15

To assess the performance of a novel 'filter'-type electro-Fenton (EF) device, results are reported from pilot-scale studies of continuous water treatment, to degrade diclofenac (DCF), a typical organic micro-pollutant, with no addition of oxidants. The novel 'filter' consisted of three pairs of anode/cathode electrodes made of carbon felt, with cathodes impregnated with iron nanoparticles (γ-Fe2O3/F3O4 oxides). The best 'filter' performance was obtained at applied potential of 2 V and low water superficial velocities (∼0.09 cm/s), i.e., the mineralization current efficiency (MCE) was >20%, during continuous steady state treatment of tap water with low DCF concentrations (16 μg/L). The EF 'filter' exhibited satisfactory stability regarding both electrode integrity (no iron leaching) and removal efficiency, even after multiple filtration/oxidation treatment cycles, achieving (under steady conditions) DCF and TOC removal 85% and 36%, respectively. This performance is considered satisfactory because the EF process took place under rather unfavorable conditions, such as neutral pH, low dissolved O2 concentration, low electrical conductivity, and presence of natural organic matter and inorganic ions in tap water. Ongoing R&D is aimed at 'filter' development and optimization for practical applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Enhancement for trace analysis of sulfonamide antibiotics in water matrices using bar adsorptive microextraction (BAμE).

PubMed

Ide, A H; Ahmad, S M; Neng, N R; Nogueira, J M F

2016-09-10

In this study, the enhancement for trace analysis of sulfonamide antibiotics (sulfathiazole, sulfamethoxazole and sulfadimethoxine) and trimethoprim in water matrices is proposed using bar adsorptive microextraction combined with micro-liquid desorption followed by high-performance liquid chromatography with diode array detection (BAμE-μLD/HPLC-DAD). By comparing different polymers and activated carbons as sorbent coatings for BAμE, the polystyrene-divinylbenzene polymer (PS-DVB) showed the best selectivity for the compounds under study. Assays performed through BAμE(PS-DVB)-μLD on 25mL of ultrapure water samples spiked at the 8.0μgL(-1) level showed recoveries ranging from 63.8±1.5% to 84.2±1.9%, under optimized experimental conditions. The validated method provided satisfactory limits of detection (0.08-0.16μgL(-1)) and good linear dynamic ranges (0.16-8.00μgL(-1)) with determination coefficients higher than 0.9958. The proposed analytical methodology was applied to real matrices, such as tap, estuarine and wastewater samples using the standard addition method. It showed to be easy to implement, with good reproducibility, sensitivity and requiring small amount of sample. Furthermore, negligible consumption of organic solvents was used in compliance with the green analytical chemistry principles. When compared to other well-established microextraction approaches, BAμE demonstrated better performance concerning recovery yields and sensitivity. Copyright © 2016 Elsevier B.V. All rights reserved.

Radiographic parameters improve lower extremity prosthetic alignment.

PubMed

Mooney, Ryan; Carry, Patrick; Wylie, Erin; Schultz, Abby; McNair, Bryan; Page, Carol; Biffl, Susan; Heare, Travis

2013-12-01

The goal of prosthetic fitting is to provide comfort and functionality to the patient. It is thought that incorporating the use of standing anterior-posterior long leg radiographs (LLR) into the fitting of lower extremity prostheses will provide an objective guide when making adjustments, and be a better assessment of alignment. This study compares prosthetic alignment before and after radiography-guided adjustments. This retrospective study was performed at a multidisciplinary amputee clinic on patients with congenital and/or acquired limb deficiencies. Their prosthetic alignment was evaluated by LLR and adjusted as needed. Satisfactory alignment was defined as a mechanical axis angular deviation of ≤1° and a leg length discrepancy of ≤10 mm. A total of 45 unique prostheses from 24 subjects (10 female and 14 male) were included. Post-adjustment radiographs were obtained from 29 prostheses. After the initial prosthetic fitting, the probability of a satisfactory fit was 20.0 % (95 % CI 10.9-34.9 %). Following the baseline adjustment, the probability of a satisfactory fit improved to 53.3 % (95 % CI 37.5-70.9 %). After adjustment number 4, the probability of a satisfactory fit further improved to 76.7 % (95 % CI 41.9-98.0 %). There were also significant improvements in distal offset distance (p = 0.0040) and leg length discrepancy (p = 0.0206). The distal offset distance decreased by an average of 10.7 mm (95 % CI 3.6-17.8), and leg length discrepancy decreased by an average of 3.0 mm (95 % CI 00.48-5.5). The addition of LLRs to existing fitting methods significantly improves prosthetic alignment and length.

Comparison between exclusively school teacher-based and mixed school teacher and healthcare provider-based programme on basic cardiopulmonary resuscitation for secondary schools.

PubMed

Jiménez-Fábrega, X; Escalada-Roig, X; Miró, O; Sanclemente, G; Díaz, N; Gómez, X; Villena, O; Rodríguez, E; Gaspar, A; Molina, J E; Salvador, J; Sánchez, M

2009-09-01

To compare two teaching methodologies for PROCES (a basic cardiopulmonary resuscitation (b-CPR) programme for secondary school students): one exclusively performed by school teachers (study group) and another by a mixed team of school teachers and healthcare providers (control group). According to their preferences, teachers chose either method and students were consequently assigned to the control or study group. All participants took a 10 multiple-choice question exam regarding b-CPR skills twice: immediately after PROCES and one year later. Eight or more correct answers was considered satisfactory learning. Results between groups were compared. Associations between satisfactory learning and some student characteristics were analysed. Immediately after PROCES, 442 students (219 in the study group and 223 in the control group) took the exam. The percentage of satisfactory learning was not different: 67.1% in the study group and 64.6% in the control group. Immediate satisfactory learning was related to the absence of pending subjects in the control (odds ratio (OR) 2.31, 95% CI 1.16 to 4.64) and study (OR 5.87, 95% CI 1.22 to 28.20) groups. One year later, a greater percentage of retention of b-CRP skills was detected in the study group (57.1% vs 40.6%; p = 0.01). The absence of any pending subject (OR 6.86, 95% CI 1.83 to 25.66) was independently associated with better retention in the study group, but not the control group. Secondary school teachers, previously trained in b-CPR, can teach these skills effectively to 14-16-year-old students using PROCES. The retention of b-CPR skills is greater with this methodology compared with a more standardised programme.

38 CFR 21.4277 - Discontinuance: unsatisfactory progress, conduct and attendance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... progress, conduct and attendance. (a) Satisfactory pursuit of program. Entitlement to benefits for a... the pursuit of such program, continues to maintain satisfactory progress. If the veteran or eligible person does not maintain satisfactory progress, educational benefits will be discontinued by the...

[Laparoscopic gastric sleeve in gastric volvulus secondary to diaphragmatic eventration in an adult patient].

PubMed

Gálvez-Valdovinos, Ramiro; Marín-Santillán, Ernesto; Funes-Rodríguez, Juan Francisco; López-Ambriz, Gustavo

2016-01-01

Acute gastric volvulus is a rare, but potentially life-threatening, cause of upper gastrointestinal obstruction. Male of 60 years old with severe epigastric pain and abdominal distension with haematemesis on two occasions. The patient was haemodynamically stable, with abdominal distension and palpable epigastric fullness. Hematic cytology showed: haemoglobin 8.2g/dl and haematocrit 27%. Abdominal X-ray showed an elevation of left diaphragm with a hugely dilated stomach. A nasogastric tube was inserted. Endoscopy was performed. There was no active bleeding, but it was impossible to reach the duodenum due to the stomach distortion. The upper gastrointestinal X-ray study showed the appearance of an inverted stomach in the chest and an organoaxial gastric torsion. The CT scans of thorax and abdomen showed a gastric ascent into the thoracic cavity. Laparoscopic surgery was performed, finding the left hemi-diaphragm elevated, and the stomach, splenic angle of the colon, the spleen and tail of the pancreas were also raised. A linear gastrectomy (gastric sleeve) was performed. The postoperative progress was satisfactory. Oral feeding was started 72 hours after surgery, and the patient was discharged, and has remained asymptomatic during the following by 8 years. Emergency physicians must maintain a high level of suspicion in patients that present with signs and symptoms suggesting upper digestive tract occlusion. The gastric sleeve is an excellent alternative to avoid recurrence of gastric volvulus. Copyright © 2015 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

Construction and Validation of an Instrument to Measure Taiwanese Elementary Students' Attitudes toward Their Science Class

NASA Astrophysics Data System (ADS)

Wang, Tzu-Ling; Berlin, Donna

2010-12-01

The main purpose of this study is to develop a valid and reliable instrument for measuring the attitudes toward science class of fourth- and fifth-grade students in an Asian school culture. Specifically, the development focused on three science attitude constructs-science enjoyment, science confidence, and importance of science as related to science class experiences. A total of 265 elementary school students in Taiwan responded to the instrument developed. Data analysis indicated that the instrument exhibited satisfactory validity and reliability with the Taiwan population used. The Cronbach's alpha coefficient was 0.93 for the entire instrument indicating a satisfactory level of internal consistency. However, both principal component analysis and parallel analysis showed that the three attitude scales were not unique and should be combined and used as a general "attitudes toward science class" scale. The analysis also showed that there were no gender or grade-level differences in students' overall attitudes toward science class.

Characterization of natural polymers from jackfruit pulp, calendula flowers and tara seeds as mucoadhesive and controlled release components in buccal tablets.

PubMed

Sabale, Vidya; Paranjape, Archana; Patel, Vandana; Sabale, Prafulla

2017-02-01

Identification and physiochemical parameters such as solubility, loss on drying, viscosity, pH, swelling index, starch and gum constituents were determined in natural polymers and showed satisfactory results. Spectral studies established the compatibility of natural polymers. The drug release kinetics in preliminary trial batches showed that tablets containing natural mucilages and gum showed a prolonged drug release comparable to Carbopol 974P and Methocel K4M. Also, all tablets showed a satisfactory drug permeability flux. Acute toxicity studies confirmed the safety of natural polymers. Using response surface method supported by 2 3 factorial design, the optimized buccoadhesive tablets (C1) with drug release at 8h (R8h, %) of 53.48±0.048% showed controlled release over ≥8h and followed the Korsmeyer-Peppas model with anomalous (non-Fickian) diffusion mechanism. Mucoadhesive strength was found to be 42.71±0.49g. Comparative dissolution study between prepared and marketed formulation showed that there was no significant difference in drug release profile having similarity factor 82.97. In vivo study for optimized formulation of the buccoadhesive tablets showed the better absolute bioavailability (71.26%) against the oral solution (51.22%). Histological study confirmed non-irritant nature and stability study indicated stability of the formulation. Copyright © 2016 Elsevier B.V. All rights reserved.

Screen-Printed Washable Electronic Textiles as Self-Powered Touch/Gesture Tribo-Sensors for Intelligent Human-Machine Interaction.

PubMed

Cao, Ran; Pu, Xianjie; Du, Xinyu; Yang, Wei; Wang, Jiaona; Guo, Hengyu; Zhao, Shuyu; Yuan, Zuqing; Zhang, Chi; Li, Congju; Wang, Zhong Lin

2018-05-22

Multifunctional electronic textiles (E-textiles) with embedded electric circuits hold great application prospects for future wearable electronics. However, most E-textiles still have critical challenges, including air permeability, satisfactory washability, and mass fabrication. In this work, we fabricate a washable E-textile that addresses all of the concerns and shows its application as a self-powered triboelectric gesture textile for intelligent human-machine interfacing. Utilizing conductive carbon nanotubes (CNTs) and screen-printing technology, this kind of E-textile embraces high conductivity (0.2 kΩ/sq), high air permeability (88.2 mm/s), and can be manufactured on common fabric at large scales. Due to the advantage of the interaction between the CNTs and the fabrics, the electrode shows excellent stability under harsh mechanical deformation and even after being washed. Moreover, based on a single-electrode mode triboelectric nanogenerator and electrode pattern design, our E-textile exhibits highly sensitive touch/gesture sensing performance and has potential applications for human-machine interfacing.

Long-term Results for the BacJac Interspinous Device in Lumbar Spine Degenerative Disease.

PubMed

Spallone, Aldo; Lavorato, Luigi; Belvisi, Daniele

2018-05-14

 To evaluate the long-term results of using the BacJac interspinous device (Pioneer Surgical Technology Inc.) in a series of patients with degenerative lumbar spine disease.  Forty-one patients undergoing lumbar surgery with implantation of a BacJac device from 2009 to 2012 were enrolled in the present study. Patients were evaluated using the Oswestry Disability Scale (ODI).  Although all patients showed a significant improvement of the ODI score immediately after surgery, only 41% of patients showed a satisfactory outcome. We observed worse results in the patients operated on at the L3-L4 level and in whom the device was implanted in a segment different from the one where surgical decompression had been performed. Weight gain in the months after surgery was also a poor outcome-influencing factor.  This study confirms what is already suggested in the relevant literature regarding the long-term inefficacy of the so-called dynamic stabilization devices. Georg Thieme Verlag KG Stuttgart · New York.

Adaptive Critic-based Neurofuzzy Controller for the Steam Generator Water Level

NASA Astrophysics Data System (ADS)

Fakhrazari, Amin; Boroushaki, Mehrdad

2008-06-01

In this paper, an adaptive critic-based neurofuzzy controller is presented for water level regulation of nuclear steam generators. The problem has been of great concern for many years as the steam generator is a highly nonlinear system showing inverse response dynamics especially at low operating power levels. Fuzzy critic-based learning is a reinforcement learning method based on dynamic programming. The only information available for the critic agent is the system feedback which is interpreted as the last action the controller has performed in the previous state. The signal produced by the critic agent is used alongside the backpropagation of error algorithm to tune online conclusion parts of the fuzzy inference rules. The critic agent here has a proportional-derivative structure and the fuzzy rule base has nine rules. The proposed controller shows satisfactory transient responses, disturbance rejection and robustness to model uncertainty. Its simple design procedure and structure, nominates it as one of the suitable controller designs for the steam generator water level control in nuclear power plant industry.

Comparison between topical honey and mafenide acetate in treatment of burn wounds

PubMed Central

Maghsoudi, H.; Salehi, F.; Khosrowshahi, M.K.; Baghaei, M.; Nasirzadeh, M.; Shams, R.

2011-01-01

Summary Histological and clinical studies of wound healing were performed in comparable cases of fresh partial-thickness burns treated with honey dressing or mafenide acetate in two groups of 50 randomly allocated patients. Of the patients with honey-treated wounds, 84% showed satisfactory epithelialization by day 7 and 100% by day 21. In wounds treated with mafenide acetate, epithelialization occurred by day 7 in 72% of cases and in 84% by day 21. Histological evidence of reparative activity was observed in 80% of wounds treated with honey dressing by day 7 with minimal inflammation. Fifty-two per cent of the mafenide acetate treated wounds showed reparative activity with inflammatory changes by day 7. Reparative activity reached 100% by day 21 with the honey dressing and 84% with mafenide acetate. Thus, in honey-dressed wounds, early subsidence of acute inflammatory changes, better control of infection, and quicker wound healing were observed, while in mafenide acetate treated wounds a sustained inflammatory reaction was noted even on epithelialization. PMID:22396671

[Validity of indicators on physical activity and sedentary behavior from the Brazilian National School-Based Health Survey among adolescents in Rio de Janeiro, Brazil].

PubMed

Tavares, Letícia Ferreira; Castro, Inês Rugani Ribeiro de; Cardoso, Letícia Oliveira; Levy, Renata Bertazzi; Claro, Rafael Moreira; Oliveira, Andreia Ferreira de

2014-09-01

This study evaluated the relative validity of physical activity indicators from the questionnaire used in the Brazilian National School-Based Health Survey (PeNSE) in the city of Rio de Janeiro, Brazil, based on a sample of 174 students. The following indicators of weekly physical activity were evaluated: ACTIVE-300MIN (≥ 300 minutes/week); ACTIVE-150MIN (≥ 150 minutes), INACTIVE (no physical activity). Additionally, indicators of sedentary behavior were also assessed, as daily screen time (TV, videogames, and computer). The results from the questionnaire were compared with three 24-hour recalls. The results of ACTIVE-300MIN, ACTIVE-150MIN, and INACTIVE generated by PeNSE showed high accuracy. These indicators performed better than those of sedentary behavior in relation to frequency estimates as well as sensitivity, specificity, and correct classification rate. The indicators of physical activity from PeNSE showed satisfactory relative validity.

Comparison of six commercial tick-borne encephalitis IgM and IgG ELISA kits and the molecular characterization of their antigenic design.

PubMed

Velay, Aurélie; Solis, Morgane; Barth, Heidi; Sohn, Véronique; Moncollin, Anne; Neeb, Amandine; Wendling, Marie-Josée; Fafi-Kremer, Samira

2018-04-01

Tick-borne encephalitis virus (TBEV) diagnosis is mainly based on the detection of viral-specific antibodies in serum. Several commercial assays are available, but published data on their performance remain unclear. We assessed six IgM and six IgG commercial enzyme-linked immunosorbent assay (ELISA) kits (ELISA-1 through ELISA-6) using 94 samples, including precharacterized TBEV-positive samples (n=50) and -negative samples (n=44). The six manufacturers showed satisfactory sensitivity and specificity and high overall agreement for both IgM and IgG. Three manufacturers showed better reproducibility and were the most sensitive (100%) and specific (95.5-98.1%) for both IgM and IgG. Two of them were also in agreement with the clinical interpretation in more than 90% of the cases. All the assays use inactivated virus as antigen, with strains showing approximately 94% homology at the amino acid level. The antigenic format of the assays was discussed to further improve this TBEV diagnostic tool. Copyright © 2017 Elsevier Inc. All rights reserved.

Generalized semiparametric varying-coefficient models for longitudinal data

NASA Astrophysics Data System (ADS)

Qi, Li

In this dissertation, we investigate the generalized semiparametric varying-coefficient models for longitudinal data that can flexibly model three types of covariate effects: time-constant effects, time-varying effects, and covariate-varying effects, i.e., the covariate effects that depend on other possibly time-dependent exposure variables. First, we consider the model that assumes the time-varying effects are unspecified functions of time while the covariate-varying effects are parametric functions of an exposure variable specified up to a finite number of unknown parameters. The estimation procedures are developed using multivariate local linear smoothing and generalized weighted least squares estimation techniques. The asymptotic properties of the proposed estimators are established. The simulation studies show that the proposed methods have satisfactory finite sample performance. ACTG 244 clinical trial of HIV infected patients are applied to examine the effects of antiretroviral treatment switching before and after HIV developing the 215-mutation. Our analysis shows benefit of treatment switching before developing the 215-mutation. The proposed methods are also applied to the STEP study with MITT cases showing that they have broad applications in medical research.

A technique for measuring the quality of an elliptically bent pentaerythritol [PET(002)] crystal

DOE PAGES

Haugh, M. J.; Jacoby, K. D.; Barrios, M. A.; ...

2016-08-23

Here, we present a technique for determining the X-ray spectral quality from each region of an elliptically curved PET(002) crystal. The investigative technique utilizes the shape of the crystal rocking curve which changes significantly as the radius of curvature changes. This unique quality information enables the spectroscopist to verify where in the spectral range that the spectrometer performance is satisfactory and where there are regions that would show spectral distortion. A collection of rocking curve measurements for elliptically curved PET(002) has been built up in our X-ray laboratory. The multi-lamellar model from the XOP software has been used as amore » guide and corrections were applied to the model based upon measurements. But, the measurement of RI at small radius of curvature shows an anomalous behavior; the multi-lamellar model fails to show this behavior. The effect of this anomalous RI behavior on an X-ray spectrometer calibration is calculated. It is compared to the multi-lamellar model calculation which is completely inadequate for predicting RI for this range of curvature and spectral energies.« less

A technique for measuring the quality of an elliptically bent pentaerythritol [PET(002)] crystal

NASA Astrophysics Data System (ADS)

Haugh, M. J.; Jacoby, K. D.; Barrios, M. A.; Thorn, D.; Emig, J. A.; Schneider, M. B.

2016-11-01

We present a technique for determining the X-ray spectral quality from each region of an elliptically curved PET(002) crystal. The investigative technique utilizes the shape of the crystal rocking curve which changes significantly as the radius of curvature changes. This unique quality information enables the spectroscopist to verify where in the spectral range that the spectrometer performance is satisfactory and where there are regions that would show spectral distortion. A collection of rocking curve measurements for elliptically curved PET(002) has been built up in our X-ray laboratory. The multi-lamellar model from the XOP software has been used as a guide and corrections were applied to the model based upon measurements. But, the measurement of RI at small radius of curvature shows an anomalous behavior; the multi-lamellar model fails to show this behavior. The effect of this anomalous RI behavior on an X-ray spectrometer calibration is calculated. It is compared to the multi-lamellar model calculation which is completely inadequate for predicting RI for this range of curvature and spectral energies.

The Effect of Online Co-Regulated Learning in the Implementation of Team-Based Learning on Improving Students' Involvement

ERIC Educational Resources Information Center

Tsai, Chia-Wen

2015-01-01

Many education institutions and teachers are recognizing and applying online learning and related educational technologies to help students achieve satisfactory learning performance. Due to the free entertainment on the Internet that may distract students' attention from online courses and with the purpose of developing students' teamwork…

13 CFR 120.433 - What are SBA's other requirements for sales and sales of participating interests?

Code of Federal Regulations, 2010 CFR

2010-01-01

... for sales and sales of participating interests? 120.433 Section 120.433 Business Credit and Assistance... requirements for sales and sales of participating interests? SBA requires the following: (a) The Lender must be... Lender has satisfactory SBA performance, as determined by SBA in its discretion. The Lender's Risk Rating...

13 CFR 120.433 - What are SBA's other requirements for sales and sales of participating interests?

Code of Federal Regulations, 2011 CFR

2011-01-01

... for sales and sales of participating interests? 120.433 Section 120.433 Business Credit and Assistance... requirements for sales and sales of participating interests? SBA requires the following: (a) The Lender must be... Lender has satisfactory SBA performance, as determined by SBA in its discretion. The Lender's Risk Rating...

Improving Face Verification in Photo Albums by Combining Facial Recognition and Metadata With Cross-Matching

DTIC Science & Technology

2017-12-01

satisfactory performance. We do not use statistical models, and we do not create patterns that require supervised learning. Our methodology is intended...statistical models, and we do not create patterns that require supervised learning. Our methodology is intended for use in personal digital image...THESIS MOTIVATION .........................................................................19 III. METHODOLOGY

Analysis of improved criteria for mold growth in ASHRAE standard 160 by comparison with field observations

Treesearch

Samuel V. Glass; Stanley D. Gatland II; Kohta Ueno; Christopher J. Schumacher

2017-01-01

ASHRAE Standard 160, Criteria for Moisture-Control Design Analysis in Buildings, was published in 2009. The standard sets criteria for moisture design loads, hygrothermal analysis methods, and satisfactory moisture performance of the building envelope. One of the evaluation criteria specifies conditions necessary to avoid mold growth. The current standard requires that...

Bilateral intra-areolar polythelia: report of a rare case.

PubMed

Onesti, Maria Giuseppina; Anniboletti, Tommaso; Spinelli, Graziano; Meggiorini, Maria Letizia

2010-06-01

A very rare case of bilateral intra-areolar polythelia with two nipples in each breast is presented. There were no other associated malformations and the patient's family history was normal. Surgical correction was performed for cosmetic reasons at the patient's request using transposition flaps in a Z-plasty design. The aesthetic and functional results were satisfactory.

Unilateral dichotomy of nipple (intraareolar polythelia) and areola: report of a case and surgical correction.

PubMed

Arranz López, José L; García, Lourdes; Elena, Elvira; Benito, Pablo; De Juan, Ana

2006-01-01

An unusual case of intraareolar polythelia with two nipples is presented. The dichotomy affected not only the nipple, but also the areola. No other breast malformation existed. Surgical correction was performed by transposition flaps sutured to one another in the center of the areola. The anatomic and functional results were satisfactory.

Linking log quality with product performance

Treesearch

D. W. Green; Robert Ross

1997-01-01

In the United States, log grading procedures use visual assessment of defects, in relation to the log scaling diameter, to estimate the yield of lumber that maybe expected from the log. This procedure was satisfactory when structural grades were based only on defect size and location. In recent years, however, structural products have increasingly been graded using a...

The Effect of Formal Policies and Informal Social Learning on Perceptions of Corporate Ethics: Actions Speak Louder than Codes.

ERIC Educational Resources Information Center

Kronzon, Shirit

2002-01-01

Discusses unethical business conduct and corporate crime, focusing on workers who bend rules to achieve satisfactory performance and organizational goals. Describes research that investigated how two cues in an organizational setting, one legal (codes of conduct) and one social (company responses to ethical transgressions), affect how individuals…

Assurance of lubricant supply in wet-lubricated space bearings

NASA Technical Reports Server (NTRS)

Glassow, F. A.

1976-01-01

Conventional lubrication techniques appear to be satisfactory, but rigorous proof of meeting a ten-year life requirement is lacking. One approach provides additional lubricant only when commanded from ground control, while the other passively augments lubrication at all times. Each technique has specific advantages, and selection should be related to the application to obtain optimum performance.

Performance Requirements in Need-Based Aid: What Roles Do They Serve, and Do They Work? Research Brief

ERIC Educational Resources Information Center

Scott-Clayton, Judith; Schudde, Lauren

2017-01-01

Satisfactory academic progress (SAP) requirements have existed in some form in the federal student aid programs for nearly 40 years--and have become increasingly strict--yet only limited research exists regarding their motivations and consequences. In this brief, the authors discuss two recent CAPSEE studies they conducted that examine the…

Brake control system modification, augmentor Wing Jet STOL Research Airplane (AWJSRA)

NASA Technical Reports Server (NTRS)

Amberg, R. L.; Arline, J. A.; Jenny, R. W.

1974-01-01

The braking system for a short takeoff aircraft is discussed and the deficiencies are described. The installation of a Boeing 727 aircraft brake system was made to correct the deficiencies. Tests of the modified system were conducted using an analog computer/hardware simulator. Actual performance tests were conducted and the characteristics of the system were satisfactory.

Case Studies of Teacher Satisfaction with Three Plans for Evaluation and Supervision

ERIC Educational Resources Information Center

Arp, Jeb-Stuart Bennett

2013-01-01

The purpose of this study was to identify which plans for evaluation and supervision are most satisfactory to teachers. The study's participants come from three school systems in northwest Georgia. Each school district uses a different plan for evaluation and supervision; each claiming that the end goal is to improve teacher performance. Prior…

Fabrication techniques for superconducting readout loops

NASA Technical Reports Server (NTRS)

Payne, J. E.

1982-01-01

Procedures for the fabrication of superconducting readout loops out of niobium on glass substrates were developed. A computer program for an existing fabrication system was developed. Both positive and negative resist procedures for the production of the readout loops were investigated. Methods used to produce satisfactory loops are described and the various parameters affecting the performance of the loops are analyzed.

Dietary score and the risk of oral cancer: a case-control study in southeast China.

PubMed

Chen, Fa; Yan, Lingjun; Lin, Lisong; Liu, Fengqiong; Qiu, Yu; Wang, Jing; Wu, Junfeng; Liu, Fangping; Huang, Jiangfeng; Cai, Lin; He, Baochang

2017-05-23

This study aims to develop a simple dietary score to comprehensively evaluate the role of diet in the risk of oral cancer. A case-control study including 930 oral cancer cases and 2667 frequency-matched controls was performed in Fujian, China. Unconditional logistic regression model was used to estimate the effects of dietary factors on oral cancer. After adjustment for potential confounders, less intake of domestic meat (< 3 times per week), fish (< 3 times per week), seafood (< 3 times per week), leafy vegetables (< 1 time per day), other vegetables (< 1 time per day), fruits (< 3 times per week), milk and dairy products (< 1 time per week) and eggs (< 5 times per week) were significant risk factors for oral cancer. Then these variables were incorporated to establish dietary risk score. Assessed by the receiver operating characteristic curve, the score showed a satisfactory discriminatory capacity, with an area under the curve of 0.682 (95% CI: 0.662-0.702). Moreover, the score was positively associated with the risk of oral cancer as quartiles, and the association was apparently stronger in tobacco smokers or alcohol drinkers. Additionally, there were significant multiplicative interactions between the score and tobacco smoking or alcohol drinking for oral cancer. In the present study, a convenient dietary score with satisfactory discriminatory capacity was developed to assess the collected effect of dietary factors on oral cancer, which could provide a new strategy for the prevention of oral cancer through changing in dietary habits.

Psychosocial risks assessment at hospital: development of a French questionnaire.

PubMed

Finger, Vincent; Baumstarck, Karine; Boufercha, Rafika; Lehucher-Michel, Marie Pascale; Loundou, Anderson; Auquier, Pascal; Sari-Minodier, Irene

2016-09-26

In order to improve the well-being, health, and performance of hospital workers, it should be important to focus on the psychosocial risk (PSR) factors in the work environment and on job satisfaction. Although many epidemiological questionnaires are used to measure PSR among healthcare workers, no specific existing model can be applied to all categories of hospital workers. To develop a short French self-administered instrument for measuring the PSR for hospital workers: the PSRH questionnaire. The content of the PSRH questionnaire was partly derived from the well-known and standardized questionnaires (Karasek Job Content and Siegriest effort-reward imbalance questionnaires). The validation process was carried out in all the departments of a large public university hospital (Marseille, France). Eligible workers were adult employees present on the day of the assessment: healthcare, administrative, and technical workers. A total of 2203 subjects were included from September 2012 to October 2013. The PSRH contains 24 items describing 6 dimensions (Management, cooperation and hierarchical support; Requirements, constraints and autonomy related to work; Support and relationship with the team; Complexity of the work and unforeseen factors; Meaning of work and recognition; and Conciliation work - work out). The six-factor structure presented satisfactory internal consistency and scalability. All the scores showed significant correlations with a well-being score. Acceptability was high. The PSRH is a self-administered instrument assessing PSR at hospital that presents satisfactory psychometric properties. Future studies should identify factors that determine low- and high-risk workers in order to implement appropriate preventing strategies.

Development of a simple and valid method for the trace determination of phthalate esters in human plasma using dispersive liquid-liquid microextraction coupled with gas chromatography-mass spectrometry.

PubMed

Ebrahim, Karim; Poursafa, Parinaz; Amin, Mohammad Mehdi

2017-11-01

A new method was developed for the trace determination of phthalic acid esters in plasma using dispersive liquid-liquid microextraction and gas chromatography with mass spectrometry analysis. Plasma proteins were efficiently precipitated by trichloroacetic acid and then a mixture of chlorobenzene (as extraction solvent) and acetonitrile (as dispersive solvent) rapidly injected to clear supernatant using a syringe. After centrifuging, chlorobenzene sedimented at the bottom of the test tube. 1 μL of this sedimented phase was injected into the gas chromatograph for phthalic acid esters analysis. Different factors affecting the extraction performance, such as the type of extraction and dispersive solvent, their volume, extraction time, and the effects of salt addition were investigated and optimized. Under the optimum conditions, the enrichment factors and extraction recoveries were satisfactory and ranged between 820-1020 and 91-97%, respectively. The linear range was wide (50-1000 ng/mL) and limit of detection was very low (1.5-2.5 ng/mL for all analytes). The relative standard deviations for analysis of 1 μg/mL of the analytes were between 3.2-6.1%. Salt addition showed no significant effect on extraction recovery. Finally, the proposed method was successfully utilized for the extraction and determination of the phthalic acid esters in human plasma samples and satisfactory results were obtained. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Satisfactory rate of postprocessing visualization of standard fetal cardiac views from 4-dimensional cardiac volumes acquired during routine ultrasound practice by experienced sonographers in peripheral centers.

PubMed

Rizzo, Giuseppe; Capponi, Alessandra; Pietrolucci, Maria Elena; Capece, Giuseppe; Cimmino, Ernesto; Colosi, Enrico; Ferrentino, Salvatore; Sica, Carmine; Di Meglio, Aniello; Arduini, Domenico

2011-01-01

The aim of this study was to evaluate the feasibility of visualizing standard cardiac views from 4-dimensional (4D) cardiac volumes obtained at ultrasound facilities with no specific experience in fetal echocardiography. Five sonographers prospectively recorded 4D cardiac volumes starting from the 4-chamber view on 500 consecutive pregnancies at 19 to 24 weeks' gestation undergoing routine ultrasound examinations (100 pregnancies for each sonographer). Volumes were sent to the referral center, and 2 independent reviewers with experience in 4D fetal echocardiography assessed their quality in the display of the abdominal view, 4-chamber view, left and right ventricular outflow tracts, and 3-vessel and trachea view. Cardiac volumes were acquired in 474 of 500 pregnancies (94.8%). The 2 reviewers respectively acknowledged the presence of satisfactory images in 92.4% and 93.6% of abdominal views, 91.5% and 93.0% of 4-chamber views, in 85.0% and 86.2% of left ventricular outflow tracts, 83.9% and 84.5% of right ventricular outflow tracts, and 85.2% and 84.5% of 3-vessel and trachea views. The presence of a maternal body mass index of greater than 30 altered the probability of achieving satisfactory cardiac views, whereas previous maternal lower abdominal surgery did not affect the quality of reconstructed cardiac views. In conclusion, cardiac volumes acquired by 4D sonography in peripheral centers showed high enough quality to allow satisfactory diagnostic cardiac views.

Rocket-borne submillimeter radiometer.

PubMed

Lange, A E; Hayakawa, S; Matsumoto, T; Matsuo, H; Murakami, H; Richards, P L; Sato, S

1987-01-15

We report the performance of a rocket-borne absolute radiometer which was designed to measure the diffuse brightness of the sky in six passbands between 100 microm and 1 mm. The radiometer consisted of a horn antenna and a photometer, both of which were cooled to 1.2 K by liquid (4)He. The performance of the instrument was satisfactory, but no astrophysical data were obtained during the flight because a lid covering the horn antenna failed to pen. Another flight of a similar apparatus is planned for 1986.

A compact inflow control device for simulating flight fan noise

NASA Technical Reports Server (NTRS)

Homyak, L.; Mcardle, J. G.; Heidelberg, L. J.

1983-01-01

Inflow control device (ICD's) of various shapes and sizes have been used to simulate inflight fan tone noise during ground static tests. A small, simple inexpensive ICD design was optimized from previous design and fabrication techniques. This compact two-fan-diameter ICD exhibits satisfactory acoustic performance characteristics without causing noise attenuation or redirection. In addition, it generates no important new noise sources. Design and construction details of the compact ICD are discussed and acoustic performance test results are presented.

Historical overview of V/STOL aircraft technology

NASA Technical Reports Server (NTRS)

Anderson, S. B.

1981-01-01

The requirements for satisfactory characteristics in several key technology areas are discussed and a review is made of various V/STOL aircraft for the purpose of assessing the success or failure of each design in meeting design requirements. Special operating techniques were developed to help circumvent deficiencies. For the most part performance and handling qualities limitations restricted operational evaluations. Flight operations emphasized the need for good STOL performance, good handling qualities, and stability and control augmentation. The majority of aircraft suffered adverse ground effects.

29 CFR 101.33 - Initiation of formal action; settlement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Director satisfactory evidence that they have adjusted the dispute, the Regional Director withdraws the... submit to the Regional Director satisfactory evidence that they have agreed upon methods for the... section 9(c) of the Act, or any other satisfactory method to resolve the dispute. If the agreed-upon...

24 CFR 242.76 - Title evidence.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., the mortgagee shall furnish to HUD a survey of the mortgage property, satisfactory to HUD, and a... reasons HUD considers to be satisfactory, title insurance cannot be furnished, the mortgagee shall furnish... company and in a form satisfactory to HUD. The policy shall name as the insureds the mortgagee and the...

[Analysis on 2011 quality control results on aerobic plate count of microbiology laboratories in China].

PubMed

Han, Haihong; Li, Ning; Li, Yepeng; Fu, Ping; Yu, Dongmin; Li Zhigang; Du, Chunming; Guo, Yunchang

2015-01-01

To test the aerobic plate count examining capability of microbiology laboratories, to ensure the accuracy and comparability of quantitative bacteria examination results, and to improve the quality of monitoring. The 4 different concentration aerobic plate count piece samples were prepared and noted as I, II, III and IV. After homogeneity and stability tests, the samples were delivered to monitoring institutions. The results of I, II, III samples were logarithmic transformed, and evaluated with Z-score method using the robust average and standard deviation. The results of IV samples were evaluated as "satisfactory" when reported as < 10 CFU/piece or as "not satisfactory" otherwise. Pearson χ2 test was used to analyze the ratio results. 309 monitoring institutions, which was 99.04% of the total number, reported their results. 271 institutions reported a satisfactory result, and the satisfactory rate was 87.70%. There was no statistical difference in satisfactory rates of I, II and III samples which were 81.52%, 88.30% and 91.40% respectively. The satisfactory rate of IV samples was 93.33%. There was no statistical difference in satisfactory rates between provincial and municipal CDC. The quality control program has provided scientific data that the aerobic plate count capability of the laboratories meets the requirements of monitoring tasks.

The Twenty-First Century University: Some Reservations.

ERIC Educational Resources Information Center

Wasser, Henry

2001-01-01

Asserts that the university is in the process of transformation and that interpretations of data intended to show the features of this reinvented university are not completely satisfactory. Suggests that previously published views may be too optimistic and hierarchical, and that an egalitarian if pluralistic university structure and…

Machining heavy plastic sections

NASA Technical Reports Server (NTRS)

Stalkup, O. M.

1967-01-01

Machining technique produces consistently satisfactory plane-parallel optical surfaces for pressure windows, made of plexiglass, required to support a photographic study of liquid rocket combustion processes. The surfaces are machined and polished to the required tolerances and show no degradation from stress relaxation over periods as long as 6 months.

36 CFR 254.23 - Studies, assessments, and approval.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Studies, assessments, and... AGRICULTURE LANDOWNERSHIP ADJUSTMENTS National Forest Townsites § 254.23 Studies, assessments, and approval... necessary studies and assessments to— (1) Determine if the applicant has made a satisfactory showing that...

How Chinese Semantics Capability Improves Interpretation in Visual Communication

ERIC Educational Resources Information Center

Cheng, Chu-Yu; Ou, Yang-Kun; Kin, Ching-Lung

2017-01-01

A visual representation involves delivering messages through visually communicated images. The study assumed that semantic recognition can affect visual interpretation ability, and the result showed that students graduating from a general high school achieve satisfactory results in semantic recognition and image interpretation tasks than students…

Identifying Individuals with Antisocial Personality Disorder Using Resting-State fMRI

PubMed Central

Tang, Yan; Jiang, Weixiong; Liao, Jian; Wang, Wei; Luo, Aijing

2013-01-01

Antisocial personality disorder (ASPD) is closely connected to criminal behavior. A better understanding of functional connectivity in the brains of ASPD patients will help to explain abnormal behavioral syndromes and to perform objective diagnoses of ASPD. In this study we designed an exploratory data-driven classifier based on machine learning to investigate changes in functional connectivity in the brains of patients with ASPD using resting state functional magnetic resonance imaging (fMRI) data in 32 subjects with ASPD and 35 controls. The results showed that the classifier achieved satisfactory performance (86.57% accuracy, 77.14% sensitivity and 96.88% specificity) and could extract stabile information regarding functional connectivity that could be used to discriminate ASPD individuals from normal controls. More importantly, we found that the greatest change in the ASPD subjects was uncoupling between the default mode network and the attention network. Moreover, the precuneus, superior parietal gyrus and cerebellum exhibited high discriminative power in classification. A voxel-based morphometry analysis was performed and showed that the gray matter volumes in the parietal lobule and white matter volumes in the precuneus were abnormal in ASPD compared to controls. To our knowledge, this study was the first to use resting-state fMRI to identify abnormal functional connectivity in ASPD patients. These results not only demonstrated good performance of the proposed classifier, which can be used to improve the diagnosis of ASPD, but also elucidate the pathological mechanism of ASPD from a resting-state functional integration viewpoint. PMID:23593272

The use of artificial neural networks and multiple linear regression to predict rate of medical waste generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jahandideh, Sepideh; Jahandideh, Samad; Asadabadi, Ebrahim Barzegari

2009-11-15

Prediction of the amount of hospital waste production will be helpful in the storage, transportation and disposal of hospital waste management. Based on this fact, two predictor models including artificial neural networks (ANNs) and multiple linear regression (MLR) were applied to predict the rate of medical waste generation totally and in different types of sharp, infectious and general. In this study, a 5-fold cross-validation procedure on a database containing total of 50 hospitals of Fars province (Iran) were used to verify the performance of the models. Three performance measures including MAR, RMSE and R{sup 2} were used to evaluate performancemore » of models. The MLR as a conventional model obtained poor prediction performance measure values. However, MLR distinguished hospital capacity and bed occupancy as more significant parameters. On the other hand, ANNs as a more powerful model, which has not been introduced in predicting rate of medical waste generation, showed high performance measure values, especially 0.99 value of R{sup 2} confirming the good fit of the data. Such satisfactory results could be attributed to the non-linear nature of ANNs in problem solving which provides the opportunity for relating independent variables to dependent ones non-linearly. In conclusion, the obtained results showed that our ANN-based model approach is very promising and may play a useful role in developing a better cost-effective strategy for waste management in future.« less

Identifying individuals with antisocial personality disorder using resting-state FMRI.

PubMed

Tang, Yan; Jiang, Weixiong; Liao, Jian; Wang, Wei; Luo, Aijing

2013-01-01

Antisocial personality disorder (ASPD) is closely connected to criminal behavior. A better understanding of functional connectivity in the brains of ASPD patients will help to explain abnormal behavioral syndromes and to perform objective diagnoses of ASPD. In this study we designed an exploratory data-driven classifier based on machine learning to investigate changes in functional connectivity in the brains of patients with ASPD using resting state functional magnetic resonance imaging (fMRI) data in 32 subjects with ASPD and 35 controls. The results showed that the classifier achieved satisfactory performance (86.57% accuracy, 77.14% sensitivity and 96.88% specificity) and could extract stabile information regarding functional connectivity that could be used to discriminate ASPD individuals from normal controls. More importantly, we found that the greatest change in the ASPD subjects was uncoupling between the default mode network and the attention network. Moreover, the precuneus, superior parietal gyrus and cerebellum exhibited high discriminative power in classification. A voxel-based morphometry analysis was performed and showed that the gray matter volumes in the parietal lobule and white matter volumes in the precuneus were abnormal in ASPD compared to controls. To our knowledge, this study was the first to use resting-state fMRI to identify abnormal functional connectivity in ASPD patients. These results not only demonstrated good performance of the proposed classifier, which can be used to improve the diagnosis of ASPD, but also elucidate the pathological mechanism of ASPD from a resting-state functional integration viewpoint.

Merging physical parameters and laboratory subjective ratings for the soundscape assessment of urban squares.

PubMed

Brambilla, Giovanni; Maffei, Luigi; Di Gabriele, Maria; Gallo, Veronica

2013-07-01

An experimental study was carried out in 20 squares in the center of Rome, covering a wide range of different uses, sonic environments, geometry, and architectural styles. Soundwalks along the perimeter of each square were performed during daylight and weekdays taking binaural and video recordings, as well as spot measurements of illuminance. The cluster analysis performed on the physical parameters, not only acoustic, provided two clusters that are in satisfactory agreement with the "a priori" classification. Applying the principal component analysis (PCA) to five physical parameters, two main components were obtained which might be associated to two environmental features, namely, "chaotic/calm" and "open/enclosed." On the basis of these two features, six squares were selected for the laboratory audio-video tests where 32 subjects took part filling in a questionnaire. The PCA performed on the subjective ratings on the sonic environment showed two main components which might be associated to two emotional meanings, namely, "calmness" and "vibrancy." The linear regression modeling between five objective parameters and the mean value of subjective ratings on chaotic/calm and enclosed/open attributes showed a good correlation. Notwithstanding these interesting results being limited to the specific data set, it is worth pointing out that the complexity of the soundscape quality assessment can be more comprehensively examined merging the field measurements of physical parameters with the subjective ratings provided by field and/or laboratory tests.

Multi-mode application of graphene quantum dots bonded silica stationary phase for high performance liquid chromatography.

PubMed

Wu, Qi; Sun, Yaming; Zhang, Xiaoli; Zhang, Xia; Dong, Shuqing; Qiu, Hongdeng; Wang, Litao; Zhao, Liang

2017-04-07

Graphene quantum dots (GQDs), which possess hydrophobic, hydrophilic, π-π stacking and hydrogen bonding properties, have great prospect in HPLC. In this study, a novel GQDs bonded silica stationary phase was prepared and applied in multiple separation modes including normal phase, reversed phase and hydrophilic chromatography mode. Alkaloids, nucleosides and nucleobases were chosen as test compounds to evaluate the separation performance of this column in hydrophilic chromatographic mode. The tested polar compounds achieved baseline separation and the resolutions reached 2.32, 4.62, 7.79, 1.68 for thymidine, uridine, adenosine, cytidine and guanosine. This new column showed satisfactory chromatographic performance for anilines, phenols and polycyclic aromatic hydrocarbons in normal and reversed phase mode. Five anilines were completely separated within 10min under the condition of mobile phase containing only 10% methanol. The effect of water content, buffer concentration and pH on chromatographic separation was further investigated, founding that this new stationary phase showed a complex retention mechanism of partitioning, adsorption and electrostatic interaction in hydrophilic chromatography mode, and the multiple retention interactions such as π-π stacking and π-π electron-donor-acceptor interaction played an important role during the separation process. This GQDs bonded column, which allows us to adjust appropriate chromatography mode according to the properties of analytes, has possibility in actual application after further research. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparative study of design and PCL-substituting systems of total knee prosthesis.

PubMed

Adam, R; Orban, C; Orban, H

2014-01-01

The aim of this study is to assess postoperative results obtained by different knee implants. The main implant types differences are given by generally implant design and by PCL substituting systems that are used. Between 04.2004 - 02.2012 we have performed 506 total knee arthroplasties (TKA), on a group of 460 patients. Our choice, was for cemented total knee prostheses, using PCL-substituting systems. Regarding general design and PCL-substituting systems of the implant we had divided the main group in three lots. In order to assess post operative result we had used the American Knee Society Score(AKSS). All prostheses types that we had implanted, had registered satisfactory values of AKSS. Our study showed that one group scored higher values of AKSS, compared the other two, but there are not statistical semnificative differences (p=0,09). Celsius.

A quantitative experiment on the fountain effect in superfluid helium

NASA Astrophysics Data System (ADS)

Amigó, M. L.; Herrera, T.; Neñer, L.; Peralta Gavensky, L.; Turco, F.; Luzuriaga, J.

2017-09-01

Superfluid helium, a state of matter existing at low temperatures, shows many remarkable properties. One example is the so called fountain effect, where a heater can produce a jet of helium. This converts heat into mechanical motion; a machine with no moving parts, but working only below 2 K. Allen and Jones first demonstrated the effect in 1938, but their work was basically qualitative. We now present data of a quantitative version of the experiment. We have measured the heat supplied, the temperature and the height of the jet produced. We also develop equations, based on the two-fluid model of superfluid helium, that give a satisfactory fit to the data. The experiment has been performed by advanced undergraduate students in our home institution, and illustrates in a vivid way some of the striking properties of the superfluid state.

The COSIMA experiments and their verification, a data base for the validation of two phase flow computer codes

NASA Astrophysics Data System (ADS)

Class, G.; Meyder, R.; Stratmanns, E.

1985-12-01

The large data base for validation and development of computer codes for two-phase flow, generated at the COSIMA facility, is reviewed. The aim of COSIMA is to simulate the hydraulic, thermal, and mechanical conditions in the subchannel and the cladding of fuel rods in pressurized water reactors during the blowout phase of a loss of coolant accident. In terms of fuel rod behavior, it is found that during blowout under realistic conditions only small strains are reached. For cladding rupture extremely high rod internal pressures are necessary. The behavior of fuel rod simulators and the effect of thermocouples attached to the cladding outer surface are clarified. Calculations performed with the codes RELAP and DRUFAN show satisfactory agreement with experiments. This can be improved by updating the phase separation models in the codes.

An overview of the novel H1-antihistamine bilastine in allergic rhinitis and urticaria.

PubMed

Jáuregui, Ignacio; García-Lirio, Eduardo; Soriano, Ana María; Gamboa, Pedro M; Antépara, Ignacio

2012-01-01

Currently available second-generation H1-antihistamines include a wide group of drugs with a better therapeutic index (or risk-benefit ratio) than the classic antihistamines, although their properties and safety profiles may differ. Bilastine is a newly registered H1-antihistamine for the oral treatment of allergic rhinitis and urticaria, with established antihistaminic and antiallergic properties. Clinical studies in allergic rhinitis and chronic urticaria show that once-daily treatment with bilastine 20 mg is effective in managing symptoms and improving patient's quality of life, with at least comparable efficacy to other nonsedative H1-antihistamines. As far as studies in healthy volunteers, clinical assays and clinical experience can establish, bilastine's safety profile is satisfactory, since it lacks anticholinergic effects, does not impair psychomotor performance or actual driving, and appears to be entirely free from cardiovascular effects.

Endodontic management of supernumerary tooth fused with maxillary first molar by using cone-beam computed tomography.

PubMed

Song, Chang-Kyu; Chang, Hoon-Sang; Min, Kyung-San

2010-11-01

Fusion is a rare occurrence, and its definitive diagnosis is of prime importance for successful root canal treatment. This case report discusses the endodontic management of a supernumerary tooth fused with a right maxillary first molar by using cone-beam computed tomography (CBCT). Nonsurgical endodontic retreatment was performed on the supernumerary tooth. A communication between the maxillary first molar and the supernumerary tooth was repaired by using flowable resin. After 1 year of follow-up, there were no clinical symptoms, and the maxillary first molar remained vital. Recall radiographs and CBCT showed satisfactory healing of the periapical pathosis. Proper diagnosis and treatment planning for endodontic management of fused teeth by using CBCT can ensure predictable and successful results. Copyright © 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Poly(alkylmethylsiloxanes) thermally immobilized on silica as stationary phases for high-performance liquid chromatography.

PubMed

Bottoli, Carla B G; Chaudhry, Zahra F; Fonseca, Dania A; Collins, Kenneth E; Collins, Carol H

2002-03-01

Poly(methyloctylsiloxane) (PMOS) and poly(methyloctadecylsiloxane) (PMODS) were sorbed onto porous HPLC silica and thermally immobilized, in the absence of radical initiators, at temperatures in the range of 80 to 180 degrees C. Following extraction of non-immobilized polymer the materials were packed into columns and their chromatographic properties evaluated. The shorter chain (PMOS) stationary phase showed good HPLC characteristics after thermal immobilizations up to 120 degrees C while the longer chain (PMODS) phase gave satisfactory HPLC phases following thermal immobilizations at 80 and 100 degrees C. Stability evaluation for the PMOS and PMODS columns immobilized at 100 degrees C required 250 ml of pH 8.5 mobile phase at 60 degrees C to significantly decrease efficiency, suggesting a long useful life time at neutral pH and ambient temperature.

A Simplified Guidance for Target Missiles Used in Ballistic Missile Defence Evaluation

NASA Astrophysics Data System (ADS)

Prabhakar, N.; Kumar, I. D.; Tata, S. K.; Vaithiyanathan, V.

2013-01-01

A simplified guidance scheme for the target missiles used in Ballistic Missile Defence is presented in this paper. The proposed method has two major components, a Ground Guidance Computation (GGC) and an In-Flight Guidance Computation. The GGC which runs on the ground uses a missile model to generate attitude history in pitch plane and computes launch azimuth of the missile to compensate for the effect of earth rotation. The vehicle follows the pre launch computed attitude (theta) history in pitch plane and also applies the course correction in azimuth plane based on its deviation from the pre launch computed azimuth plane. This scheme requires less computations and counters In-flight disturbances such as wind, gust etc. quite efficiently. The simulation results show that the proposed method provides the satisfactory performance and robustness.

Fuzzy multinomial logistic regression analysis: A multi-objective programming approach

NASA Astrophysics Data System (ADS)

Abdalla, Hesham A.; El-Sayed, Amany A.; Hamed, Ramadan

2017-05-01

Parameter estimation for multinomial logistic regression is usually based on maximizing the likelihood function. For large well-balanced datasets, Maximum Likelihood (ML) estimation is a satisfactory approach. Unfortunately, ML can fail completely or at least produce poor results in terms of estimated probabilities and confidence intervals of parameters, specially for small datasets. In this study, a new approach based on fuzzy concepts is proposed to estimate parameters of the multinomial logistic regression. The study assumes that the parameters of multinomial logistic regression are fuzzy. Based on the extension principle stated by Zadeh and Bárdossy's proposition, a multi-objective programming approach is suggested to estimate these fuzzy parameters. A simulation study is used to evaluate the performance of the new approach versus Maximum likelihood (ML) approach. Results show that the new proposed model outperforms ML in cases of small datasets.

Image restoration approach to address reduced modulation contrast in structured illumination microscopy

PubMed Central

Patwary, Nurmohammed; Doblas, Ana; Preza, Chrysanthe

2018-01-01

The performance of structured illumination microscopy (SIM) is hampered in many biological applications due to the inability to modulate the light when imaging deep into the sample. This is in part because sample-induced aberration reduces the modulation contrast of the structured pattern. In this paper, we present an image restoration approach suitable for processing raw incoherent-grid-projection SIM data with a low fringe contrast. Restoration results from simulated and experimental ApoTome SIM data show results with improved signal-to-noise ratio (SNR) and optical sectioning compared to the results obtained from existing methods, such as 2D demodulation and 3D SIM deconvolution. Our proposed method provides satisfactory results (quantified by the achieved SNR and normalized mean square error) even when the modulation contrast of the illumination pattern is as low as 7%. PMID:29675307

Conical : An extended module for computing a numerically satisfactory pair of solutions of the differential equation for conical functions

NASA Astrophysics Data System (ADS)

Dunster, T. M.; Gil, A.; Segura, J.; Temme, N. M.

2017-08-01

Conical functions appear in a large number of applications in physics and engineering. In this paper we describe an extension of our module Conical (Gil et al., 2012) for the computation of conical functions. Specifically, the module includes now a routine for computing the function R-1/2+ iτ m (x) , a real-valued numerically satisfactory companion of the function P-1/2+ iτ m (x) for x > 1. In this way, a natural basis for solving Dirichlet problems bounded by conical domains is provided. The module also improves the performance of our previous algorithm for the conical function P-1/2+ iτ m (x) and it includes now the computation of the first order derivative of the function. This is also considered for the function R-1/2+ iτ m (x) in the extended algorithm.

[Clinical analysis of nasal mucosa contact headache].

PubMed

Gu, Qingjia; Wen, Bei; Li, Jingxian; Fan, Jiangang; He, Gang

2013-07-01

To investigate the efficacy of nasal mucosa contact point headache with the treatment of endoscopic sinus surgery. Clinical data of 75 cases with nasal mucosa contact point headache treated in our department from Jan 2008 to Nov 2011 were retrospectively analyzed. These patients were performed with endoscopic sinus surgery. All patients were followed up for more than six months. They all achieved significant efficacy and no complications occurred. Nasal mucosa contact point headache and primary headache had different clinical features and different treatment. Misdiagnosis were easily made if not being carefully analyzed. Three lines tension relaxing septorhinoplasty combined with nasal bone fracture correction can achieve satisfactory curative effect and can effectively prevent the occurrence of complications. Therefore, it is necessary to strengthen the awareness of this disease. Nasal structure abnormality is the main reason of nasal mucosa contact point headache. The implementation of individualized nasal endoscopic sinus surgery can achieve satisfactory curative effect.

A simulation model of hospital management based on cost accounting analysis according to disease.

PubMed

Tanaka, Koji; Sato, Junzo; Guo, Jinqiu; Takada, Akira; Yoshihara, Hiroyuki

2004-12-01

Since a little before 2000, hospital cost accounting has been increasingly performed at Japanese national university hospitals. At Kumamoto University Hospital, for instance, departmental costs have been analyzed since 2000. And, since 2003, the cost balance has been obtained according to certain diseases for the preparation of Diagnosis-Related Groups and Prospective Payment System. On the basis of these experiences, we have constructed a simulation model of hospital management. This program has worked correctly at repeated trials and with satisfactory speed. Although there has been room for improvement of detailed accounts and cost accounting engine, the basic model has proved satisfactory. We have constructed a hospital management model based on the financial data of an existing hospital. We will later improve this program from the viewpoint of construction and using more various data of hospital management. A prospective outlook may be obtained for the practical application of this hospital management model.

Determination of azoxystrobin and chlorothalonil using a methacrylate-based polymer modified with gold nanoparticles as solid-phase extraction sorbent.

PubMed

Catalá-Icardo, Mónica; Gómez-Benito, Carmen; Simó-Alfonso, Ernesto Francisco; Herrero-Martínez, José Manuel

2017-01-01

This paper describes a novel and sensitive method for extraction, preconcentration, and determination of two important widely used fungicides, azoxystrobin, and chlorothalonil. The developed methodology is based on solid-phase extraction (SPE) using a polymeric material functionalized with gold nanoparticles (AuNPs) as sorbent followed by high-performance liquid chromatography (HPLC) with diode array detector (DAD). Several experimental variables that affect the extraction efficiency such as the eluent volume, sample flow rate, and salt addition were optimized. Under the optimal conditions, the sorbent provided satisfactory enrichment efficiency for both fungicides, high selectivity and excellent reusability (>120 re-uses). The proposed method allowed the detection of 0.05 μg L -1 of the fungicides and gave satisfactory recoveries (75-95 %) when it was applied to drinking and environmental water samples (river, well, tap, irrigation, spring, and sea waters).

34 CFR 535.42 - What is the period of a fellowship?

Code of Federal Regulations, 2010 CFR

2010-07-01

... one-year periods to an individual who maintains satisfactory progress in a master's or post-doctoral... satisfactory progress in a doctoral program of study. (b) Subject to the availability of funds, and if an IHE... maintain satisfactory progress in the program of study. (Authority: 20 U.S.C. 7475) ...

46 CFR 177.310 - Satisfactory service as a design basis.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Satisfactory service as a design basis. 177.310 Section... (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.310 Satisfactory service as a design basis. When scantlings for the hull, deckhouse, and frames of the vessel differ from those...

Nonlinear analysis and performance evaluation of the Annular Suspension and Pointing System (ASPS)

NASA Technical Reports Server (NTRS)

Joshi, S. M.

1978-01-01

The Annular Suspension and Pointing System (ASPS) can provide high accurate fine pointing for a variety of solar-, stellar-, and Earth-viewing scientific instruments during space shuttle orbital missions. In this report, a detailed nonlinear mathematical model is developed for the ASPS/Space Shuttle system. The equations are augmented with nonlinear models of components such as magnetic actuators and gimbal torquers. Control systems and payload attitude state estimators are designed in order to obtain satisfactory pointing performance, and statistical pointing performance is predicted in the presence of measurement noise and disturbances.

[Evaluation of the immune response after vaccination against distemper at a mink (Mustela vison) farm in Argentina].

PubMed

Jar, A M; Ramayo, L G; Stempler, A; Goldman, L H; Mundo, S L

2010-01-01

Distemper virus causes a disease affecting minks with respiratory, gastrointestinal, neurological and skin symptoms and showing high morbidity and mortality, mainly among puppies. It is controlled through immunization, using vaccines that are supplied for mink use. The aim of this work was to determine the seroneutralization titer against the distemper virus at a mink farm in Argentina. The antibody kinetics obtained after vaccination in 27 adult animals, as well as the duration of colostrum-transferred antibodies in 10 puppies were determined. All vaccinated adult minks showed protective titers up to at least 3 months after vaccination, and 37.5% significantly reduced their antibody levels, 12 months after vaccination. Only 20% of the puppies showed protective levels of colostrum-transferred antibodies at the age of 7 weeks, while non-detectable levels of antibodies were found when puppies reached 11 weeks old. Vaccination performed in these puppies at the age of 13 weeks, elicited protective seroneutralization titers. These results show that vaccination induces a satisfactory humoral immune response in our environment, and support the convenience of vaccinating dams annually before the beginning of the breeding season. The vaccination plan in puppies is also discussed.

46 CFR 91.55-1 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... it is intended that only those plans and specifications be submitted as will clearly show the vessel... Shipping are forwarded to the Coast Guard they will in general be accepted as satisfactory except insofar as the law or the Coast Guard regulations contain requirements which are not covered by the American...

Effective Student Motivation Commences with Resolving "Dissatisfiers"

ERIC Educational Resources Information Center

Prescott, Ann; Simpson, Edward

2004-01-01

The evolution in students' expectations based on Maslow's theory of human motivation shows a transition from expectations having an effect upon motivation towards those providing a satisfactory experience. Maslow's argument was that once the lower level needs, such as physiological and safety needs, are met other higher needs emerge. In the…

42 CFR 456.651 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 42 Public Health 4 2014-10-01 2014-10-01 false Definitions. 456.651 Section 456.651 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Penalty for Failure To Make a Satisfactory Showing of an Effective Institutional Utilization Control Progra...

42 CFR 456.651 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 4 2011-10-01 2011-10-01 false Definitions. 456.651 Section 456.651 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Penalty for Failure To Make a Satisfactory Showing of an Effective Institutional Utilization Control Progra...

42 CFR 456.651 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 42 Public Health 4 2013-10-01 2013-10-01 false Definitions. 456.651 Section 456.651 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Penalty for Failure To Make a Satisfactory Showing of an Effective Institutional Utilization Control Progra...

42 CFR 456.651 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Definitions. 456.651 Section 456.651 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Penalty for Failure To Make a Satisfactory Showing of an Effective Institutional Utilization Control Progra...

42 CFR 456.651 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 42 Public Health 4 2012-10-01 2012-10-01 false Definitions. 456.651 Section 456.651 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL Penalty for Failure To Make a Satisfactory Showing of an Effective Institutional Utilization Control Progra...

Schema Theory and College English Reading Teaching

ERIC Educational Resources Information Center

Zhao, Xiaoguang; Zhu, Lei

2012-01-01

Reading plays a dominant role among the four skills in foreign language acquisition for college students. Unfortunately, over the past few decades, English teaching practice shows that Chinese students are vulnerable in it. Both their reading speed and their reading skills are far from being satisfactory. Schema theory presents a very efficient…

Smart Nanocomposites of Cu-Hemin Metal-Organic Frameworks for Electrochemical Glucose Biosensing

PubMed Central

He, Juan; Yang, Han; Zhang, Yayun; Yu, Jie; Miao, Longfei; Song, Yonghai; Wang, Li

2016-01-01

Herein, a smart porous material, Cu-hemin metal-organic-frameworks (Cu-hemin MOFs), was synthesized via assembling of Cu2+ with hemin to load glucose oxidase (GOD) for electrochemical glucose biosensing for the first time. The formation of the Cu-hemin MOFs was verified by scanning electron microscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, N2 adsorption/desorption isotherms, UV-vis absorption spectroscopy, fluorescence spectroscopy, thermal analysis and electrochemical techniques. The results indicated that the Cu-hemin MOFs showed a ball-flower-like hollow cage structure with a large specific surface area and a large number of mesopores. A large number of GOD molecules could be successfully loaded in the pores of Cu-hemin MOFs to keep their bioactivity just like in a solution. The GOD/Cu-hemin MOFs exhibited both good performance toward oxygen reduction reaction via Cu-hemin MOFs and catalytic oxidation of glucose via GOD, superior to other GOD/MOFs and GOD/nanomaterials. Accordingly, the performance of GOD/Cu-hemin MOFs-based electrochemical glucose sensor was enhanced greatly, showing a wide linear range from 9.10 μM to 36.0 mM and a low detection limit of 2.73 μM. Moreover, the sensor showed satisfactory results in detection of glucose in human serum. This work provides a practical design of new electrochemical sensing platform based on MOFs and biomolecules. PMID:27811998

Evaluation of Wood Species and Preservatives for Use in Wisconsin Highway Sign Posts

Treesearch

Stan T. Lebow; Robert J. Ross; Samuel L. Zelinka

2014-01-01

The Wisconsin Department of Transportation (WisDOT) uses wooden posts to support many types of signs along state highways. WisDOT currently uses red pine or Southern Pine posts treated with chromated copper arsenate (CCA) and has generally experienced satisfactory performance and service life. However, there are some areas of concern, as well as potential opportunities...

Root-collar diameter and third-year survival of three bottomland hardwoods planted on former agricultural fields in the Lower Mississippi Alluvial Valley

Treesearch

Emile S. Gardiner; Douglass F. Jacobs; Ronald P. Overton; George Hernandez

2009-01-01

Athough the Lower Mississippi Alluvial Valley (LMAV) has experienced substantial afforestation of former agricultural fields during the past 2 decades, seedling standards that support satisfactory outplanting performance of bottomland hardwood tree species are not available. A series of experimental plantations, established on three afforestation sites in the LMAV,...

Development of an alpha scattering instrument for heavy element detection in surface materials

NASA Technical Reports Server (NTRS)

Turkevich, A. L.; Economou, T.; Blume, E.; Anderson, W.

1974-01-01

The development and characteristics of a portable instrument for detecting and measuring the amounts of lead in painted surfaces are discussed. The instrument is based on the ones used with the alpha scattering experiment on the Surveyor lunar missions. The principles underlying the instrument are described. It is stated that the performance tests of the instrument were satisfactory.

The Relationship between Test Preparation and State Test Performance: Evidence from the Measure of Effective Teaching (MET) Project

ERIC Educational Resources Information Center

Li, Hongli; Xiong, Yao

2018-01-01

The passage of the NCLB Act enhanced accountability policies in the United States, and standardized testing became prevalent as a policy tool to ensure accountability in K-12 education. Given the high stakes of state administered accountability tests, more school teachers have adopted test-preparation strategies to ensure satisfactory student…

Statistical, Graphical, and Learning Methods for Sensing, Surveillance, and Navigation Systems

DTIC Science & Technology

2016-06-28

harsh propagation environments. Conventional filtering techniques fail to provide satisfactory performance in many important nonlinear or non...Gaussian scenarios. In addition, there is a lack of a unified methodology for the design and analysis of different filtering techniques. To address...these problems, we have proposed a new filtering methodology called belief condensation (BC) DISTRIBUTION A: Distribution approved for public release

Stress Inoculation through Cognitive and Biofeedback Training

DTIC Science & Technology

2010-12-01

based on Heart Rate Variability ( HRV ) with innovative simulation game-based training tools. The training system described here will be implemented on a...Variability ( HRV ) with innovative simulation game-based training tools. The training system described here will be implemented on a mobile device...and studies (e.g. Fletcher & Tobias, 2006; Thayer, 2009). HRV Coherence Training for Stress Resilience Satisfactory performance in stressful

A study of the problem of designing airplanes with satisfactory inherent damping of the dutch roll oscillation

NASA Technical Reports Server (NTRS)

Campbell, John P; Mckinney, Marion O , Jr

1954-01-01

Considerable interest has recently been shown in means of obtaining satisfactory stability of the dutch roll oscillation for modern high-performance airplanes without resort to complicated artificial stabilizing devices. One approach to this problem is to lay out the airplane in the earliest stages of design so that it will have the greatest practicable inherent stability of the lateral oscillation. The present report presents some preliminary results of a theoretical analysis to determine the design features that appear most promising in providing adequate inherent stability. These preliminary results cover the case of fighter airplanes at subsonic speeds. The investigation indicated that it is possible to design fighter airplanes to have substantially better inherent stability than most current designs. Since the use of low-aspect-ratio swept-back wings is largely responsible for poor dutch roll stability, it is important to design the airplane with the maximum aspect ratio and minimum sweep that will permit attainment of the desired performance. The radius of gyration in roll should be kept as low as possible and the nose-up inclination of the principal longitudinal axis of inertia should be made as great as practicable. (author)

Does Excision of Heterotopic Ossification of the Elbow Result in Satisfactory Patient-Rated Outcomes?

PubMed

Sandeep, K N; Suresh, G; Gopisankar, B; Abhishek, N; Sujiv, A

2017-03-01

Treatment of heterotopic ossification (HO) of the elbow is challenging and fraught with complications. Patients who sustain direct trauma to the elbow joint, the central nervous system, and thermal burns are at increased risk for development of HO. There is a paucity of studies and reports on patient's self-evaluation after the excision of the heterotopic ossification. This retrospective study assessed outcomes after excision of heterotopic ossification around the elbow in a cohort of ten patients operated from 2012 to 2015. The outcome assessment was done by the Mayo Elbow Performance index (MEPI) and the American Shoulder and Elbow Surgeons-Elbow score (ASES-E scores). The mean follow-up was 18.11 months after the operation. The Mayo Elbow Performance Score was excellent in two elbows, good in six and fair in two. The mean gain in flexion-extension arc after excision of HO was 80 degrees. All of the patients had residual flexion deformity postoperatively. Eight of the nine patients were able to do activities requiring flexion at final follow-up. Excision of HO around the elbow is associated with satisfactory patient-rated outcomes in spite of failure to regain full range of motion.

Biofilters for stormwater harvesting: understanding the treatment performance of key metals that pose a risk for water use.

PubMed

Feng, Wenjun; Hatt, Belinda E; McCarthy, David T; Fletcher, Tim D; Deletic, Ana

2012-05-01

A large-scale stormwater biofilter column study was conducted to evaluate the impact of design configurations and operating conditions on metal removal for stormwater harvesting and protection of aquatic ecosystems. The following factors were tested over 8 months of operation: vegetation selection (plant species), filter media type, filter media depth, inflow volume (loading rate), and inflow pollutant concentrations. Operational time was also integrated to evaluate treatment performance over time. Vegetation and filter type were found to be significant factors for treatment of metals. A larger filter media depth resulted in increased outflow concentrations of iron, aluminum, chromium, zinc, and lead, likely due to leaching and mobilization of metals within the media. Treatment of all metals except aluminum and iron was generally satisfactory with respect to drinking water quality standards, while all metals met standards for irrigation. However, it was shown that biofilters could be optimized for removal of iron to meet the required drinking water standards. Biofilters were generally shown to be resilient to variations in operating conditions and demonstrated satisfactory removal of metals for stormwater-harvesting purposes. © 2012 American Chemical Society

One-stage Revision ACL reconstruction with hamstring autograft results in satisfactory outcome

PubMed Central

Kejriwal, Ritwik; Buelow, Jens

2017-01-01

Objectives: Revision anterior cruciate ligament (ACL) reconstruction is associated with poorer outcomes and higher rerupture rates when compared to primary ACL reconstruction. There is also a significant heterogeneity in surgical technique, number of stages, and graft options. We report a large single surgeon case series with hamstring autograft as a graft option. Methods: Observational series of revision ACL reconstructions performed by the senior author between 2005 and 2015 was carried out. Chart reviews and clinic follow-ups were performed with the following recorded – re-rupture rate, radiographic grading of osteoarthritis, KT-1000 arthrometer test, IKDC outcome scores and knee range of motion. All patients underwent single bundle four-strand hamstring autograft performed in one stage with use of new tunnels in majority of the cases. Results: 66 patients underwent hamstring autograft one-stage revision ACL reconstruction by Dr Jens Buelow. Chart review was carried out on all patients, and 26 (39%) were followed up in clinic and/or by phone with a mean follow up of 4.7 years. Outcomes included re-rupture rate of 4.5%, reoperation rate of 12%, mean visual analogue scale score of 7.6, mean side-to-side difference of 2.6 mm for KT-1000 arthrometer test, and mean IKDC score of 79. Of the 17 patients with radiographs, 40% had moderate osteoarthritis (grade 2 or 3) at follow-up. Conclusion: Revision ACL reconstruction can result in a satisfactory outcome when performed with a hamstring autograft in one stage.

77 FR 4029 - Nationwide Categorical Waivers Under the American Recovery and Reinvestment Act of 2009 (Recovery...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-26

... available quantities and of a satisfactory quality), with respect to Recovery Act projects funded by EERE... and of a satisfactory quality (``nonavailability''). The authority of the Secretary of Energy to make... available quantities and of a satisfactory quality. The above items, when used on eligible EERE Recovery Act...

46 CFR 177.310 - Satisfactory service as a design basis.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Satisfactory service as a design basis. 177.310 Section 177.310 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.310 Satisfactory service as a design basis. When scantlings for the hull,...

46 CFR 177.310 - Satisfactory service as a design basis.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Satisfactory service as a design basis. 177.310 Section 177.310 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.310 Satisfactory service as a design basis. When scantlings for the hull,...

46 CFR 177.310 - Satisfactory service as a design basis.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Satisfactory service as a design basis. 177.310 Section 177.310 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) CONSTRUCTION AND ARRANGEMENT Hull Structure § 177.310 Satisfactory service as a design basis. When scantlings for the hull,...

Benchmarking of London Dispersion-Accounting Density Functional Theory Methods on Very Large Molecular Complexes.

PubMed

Risthaus, Tobias; Grimme, Stefan

2013-03-12

A new test set (S12L) containing 12 supramolecular noncovalently bound complexes is presented and used to evaluate seven different methods to account for dispersion in DFT (DFT-D3, DFT-D2, DFT-NL, XDM, dDsC, TS-vdW, M06-L) at different basis set levels against experimental, back-corrected reference energies. This allows conclusions about the performance of each method in an explorative research setting on "real-life" problems. Most DFT methods show satisfactory performance but, due to the largeness of the complexes, almost always require an explicit correction for the nonadditive Axilrod-Teller-Muto three-body dispersion interaction to get accurate results. The necessity of using a method capable of accounting for dispersion is clearly demonstrated in that the two-body dispersion contributions are on the order of 20-150% of the total interaction energy. MP2 and some variants thereof are shown to be insufficient for this while a few tested D3-corrected semiempirical MO methods perform reasonably well. Overall, we suggest the use of this benchmark set as a "sanity check" against overfitting to too small molecular cases.

Human Activity Recognition from Body Sensor Data using Deep Learning.

PubMed

Hassan, Mohammad Mehedi; Huda, Shamsul; Uddin, Md Zia; Almogren, Ahmad; Alrubaian, Majed

2018-04-16

In recent years, human activity recognition from body sensor data or wearable sensor data has become a considerable research attention from academia and health industry. This research can be useful for various e-health applications such as monitoring elderly and physical impaired people at Smart home to improve their rehabilitation processes. However, it is not easy to accurately and automatically recognize physical human activity through wearable sensors due to the complexity and variety of body activities. In this paper, we address the human activity recognition problem as a classification problem using wearable body sensor data. In particular, we propose to utilize a Deep Belief Network (DBN) model for successful human activity recognition. First, we extract the important initial features from the raw body sensor data. Then, a kernel principal component analysis (KPCA) and linear discriminant analysis (LDA) are performed to further process the features and make them more robust to be useful for fast activity recognition. Finally, the DBN is trained by these features. Various experiments were performed on a real-world wearable sensor dataset to verify the effectiveness of the deep learning algorithm. The results show that the proposed DBN outperformed other algorithms and achieves satisfactory activity recognition performance.

Wear performance of garnet aluminium composites at high contact pressure

NASA Astrophysics Data System (ADS)

Sharma, Anju; Arora, Rama; Kumar, Suresh; Singh, Gurmel; Pandey, O. P.

2016-05-01

To satisfy the needs of the engineering sector, researchers and material scientists in this area adopted the development of composites with tailor made properties to enhance efficiency and cost savings in the manufacturing sector. The technology of the mineral industry is shaping the supply and demand of minerals derived materials. The composites are best classified as high performance materials have high strength-to-weight ratios, and require controlled manufacturing environments for optimum performance. Natural mineral garnet was used as the reinforcement of composite because of satisfactory mechanical properties as well as an attractive ecological alternative to others ceramics. For this purpose, samples have been prepared with different sizesof the garnet reinforcement using the mechanical stirring method to achieve the homogeneously dispersed strengthening phase. A systematic study of the effect of high contact pressure on the sliding wear behaviour of garnet reinforced LM13 alloy composites is presented in this paper. The SEM analysis of the worn samples and debris reveals the clues about the wear mechanism. The drastic improvement in the wear resistance of the composites at high contact pressure shows the high potential of the material to be used in engineering applications.

Rectangular Microstrip Antenna with Slot Embedded Geometry

NASA Astrophysics Data System (ADS)

Ambresh, P. A.; Hadalgi, P. M.; Hunagund, P. V.; Sujata, A. A.

2014-09-01

In this paper, a novel design that improves the performance of conventional rectangular microstrip antenna is discussed. Design adopts basic techniques such as probe feeding technique with rectangular inverted patch structure as superstrate, air filled dielectric medium as substrate and slot embedded patch. Prototype of the proposed antenna has been fabricated and various antenna performance parameters such as impedance bandwidth, return loss, radiation pattern and antenna gain are considered for Electromagnetic-study. The antennas are designed for the wireless application operating in the frequency range of 3.3 GHz to 3.6 GHz, and UK based fixed satellite service application (3 GHz to 4 GHz), and are named as single inverted patch conventional rectangular microstrip antenna (SIP-CRMSA) and slots embedded inverted patch rectangular microstrip antenna (SEIP-RMSA), respectively. Measurement outcomes for SEIP-RMSA1 and SEIP-RMSA2 showed the satisfactory performance with an achievable impedance bandwidth of 260 MHz (7 %) and 250 MHz (6.72 %), with return loss (RL) of -11.06 dB and -17.98 dB, achieved gain of 8.17 dB and 5.17 dB with 10% and 8% size reduction in comparison with the conventional patch antenna.

Mind wandering and the attention network system.

PubMed

Gonçalves, Óscar F; Rêgo, Gabriel; Oliveira-Silva, Patrícia; Leite, Jorge; Carvalho, Sandra; Fregni, Felipe; Amaro, Edson; Boggio, Paulo S

2017-01-01

Attention and mind wandering are often seen as anticorrelated. However, both attention and mind wandering are multi-component processes, and their relationship may be more complex than previously thought. In this study, we tested the interference of different types of thoughts as measured by a Thought Identification Task - TIT (on task thoughts, task related interference thoughts, external distractions, stimulus independent and task unrelated thoughts) on different components of the attention network system - ANT (alerting, orienting, executive). Results show that, during the ANT, individuals were predominantly involved in task related interference thoughts which, along with external distractors, significantly impaired their performance accuracy. However, mind wandering (i.e., stimulus independent and task unrelated thoughts) did not significantly interfere with accuracy in the ANT. No significant relationship was found between type of thoughts and alerting, orienting, or executive effects in the ANT. While task related interference thoughts and external distractions seemed to impair performance on the attention task, mind wandering was still compatible with satisfactory performance in the ANT. The present results confirmed the importance of differentiating type of "out of task" thoughts in studying the relationship between though distractors and attention. Copyright © 2016 Elsevier B.V. All rights reserved.

Implantable centrifugal blood pump with dual impeller and double pivot bearing system: electromechanical actuator, prototyping, and anatomical studies.

PubMed

Bock, Eduardo; Antunes, Pedro; Leao, Tarcisio; Uebelhart, Beatriz; Fonseca, Jeison; Leme, Juliana; Utiyama, Bruno; da Silva, Cibele; Cavalheiro, Andre; Filho, Diolino Santos; Dinkhuysen, Jarbas; Biscegli, Jose; Andrade, Aron; Arruda, Celso

2011-05-01

An implantable centrifugal blood pump has been developed with original features for a left ventricular assist device. This pump is part of a multicenter and international study with the objective to offer simple, affordable, and reliable devices to developing countries. Previous computational fluid dynamics investigations and wear evaluation in bearing system were performed followed by prototyping and in vitro tests. In addition, previous blood tests for assessment of normalized index of hemolysis show results of 0.0054±2.46 × 10⁻³ mg/100 L. An electromechanical actuator was tested in order to define the best motor topology and controller configuration. Three different topologies of brushless direct current motor (BLDCM) were analyzed. An electronic driver was tested in different situations, and the BLDCM had its mechanical properties tested in a dynamometer. Prior to evaluation of performance during in vivo animal studies, anatomical studies were necessary to achieve the best configuration and cannulation for left ventricular assistance. The results were considered satisfactory, and the next step is to test the performance of the device in vivo. © 2011, Copyright the Authors. Artificial Organs © 2011, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Self-tuning control algorithm design for vehicle adaptive cruise control system through real-time estimation of vehicle parameters and road grade

NASA Astrophysics Data System (ADS)

Marzbanrad, Javad; Tahbaz-zadeh Moghaddam, Iman

2016-09-01

The main purpose of this paper is to design a self-tuning control algorithm for an adaptive cruise control (ACC) system that can adapt its behaviour to variations of vehicle dynamics and uncertain road grade. To this aim, short-time linear quadratic form (STLQF) estimation technique is developed so as to track simultaneously the trend of the time-varying parameters of vehicle longitudinal dynamics with a small delay. These parameters are vehicle mass, road grade and aerodynamic drag-area coefficient. Next, the values of estimated parameters are used to tune the throttle and brake control inputs and to regulate the throttle/brake switching logic that governs the throttle and brake switching. The performance of the designed STLQF-based self-tuning control (STLQF-STC) algorithm for ACC system is compared with the conventional method based on fixed control structure regarding the speed/distance tracking control modes. Simulation results show that the proposed control algorithm improves the performance of throttle and brake controllers, providing more comfort while travelling, enhancing driving safety and giving a satisfactory performance in the presence of different payloads and road grade variations.

Design and test of 1/5th scale horizontal axis tidal current turbine

NASA Astrophysics Data System (ADS)

Liu, Hong-wei; Zhou, Hong-bin; Lin, Yong-gang; Li, Wei; Gu, Hai-gang

2016-06-01

Tidal current energy is prominent and renewable. Great progress has been made in the exploitation technology of tidal current energy all over the world in recent years, and the large scale device has become the trend of tidal current turbine (TCT) for its economies. Instead of the similarity to the wind turbine, the tidal turbine has the characteristics of high hydrodynamic efficiency, big thrust, reliable sealing system, tight power transmission structure, etc. In this paper, a 1/5th scale horizontal axis tidal current turbine has been designed, manufactured and tested before the full scale device design. Firstly, the three-blade horizontal axis rotor was designed based on traditional blade element momentum theory and its hydrodynamic performance was predicted in numerical model. Then the power train system and stand-alone electrical control unit of tidal current turbine, whose performances were accessed through the bench test carried out in workshop, were designed and presented. Finally, offshore tests were carried out and the power performance of the rotor was obtained and compared with the published literatures, and the results showed that the power coefficient was satisfactory, which agrees with the theoretical predictions.

Sliding Mode Tracking Control of a Wire-Driven Upper-Limb Rehabilitation Robot with Nonlinear Disturbance Observer.

PubMed

Niu, Jie; Yang, Qianqian; Wang, Xiaoyun; Song, Rong

2017-01-01

Robot-aided rehabilitation has become an important technology to restore and reinforce motor functions of patients with extremity impairment, whereas it can be extremely challenging to achieve satisfactory tracking performance due to uncertainties and disturbances during rehabilitation training. In this paper, a wire-driven rehabilitation robot that can work over a three-dimensional space is designed for upper-limb rehabilitation, and sliding mode control with nonlinear disturbance observer is designed for the robot to deal with the problem of unpredictable disturbances during robot-assisted training. Then, simulation and experiments of trajectory tracking are carried out to evaluate the performance of the system, the position errors, and the output forces of the designed control scheme are compared with those of the traditional sliding mode control (SMC) scheme. The results show that the designed control scheme can effectively reduce the tracking errors and chattering of the output forces as compared with the traditional SMC scheme, which indicates that the nonlinear disturbance observer can reduce the effect of unpredictable disturbances. The designed control scheme for the wire-driven rehabilitation robot has potential to assist patients with stroke in performing repetitive rehabilitation training.

[Surgical treatment for liver haematoma following endoscopic retrograde cholangiopancreatography; An unusual case].

PubMed

González-López, Rogelio; García-Cano, Eugenio; Espinosa-González, Omar; Cruz-Salgado, Ángel; Montiel-Jarquin, Álvaro-José; Hernández-Zamora, Valeria

2015-01-01

Even in expert hands, there can be serious complications when performing an endoscopic retrograde cholangiopancreatography. The most frequent complications are pancreatitis, cholangitis, bleeding, perforation, and acute cholecystitis. The hepatic subcapsular haematoma is a rare complication, with few cases described worldwide. A case is presented of an extremely rare complication of endoscopic retrograde cholangiopancreatography, which required surgical treatment for its resolution without success. This is second case of mortality reported in the literature. Female patient of 30 years old, with indication for endoscopic retrograde cholangiopancreatography due to benign strictures. A hydro-pneumatic dilation and stent placement of 2 gauge 10 fr was performed. She presented abdominal pain after the procedure and significant decline in haemoglobin with no evidence of haemodynamic instability so an abdominal tomography scan was performed, showing no evidence of liver injury. The patient was haemodynamic unstable within 72 h. A laparotomy was required for damage control, with fatal outcome in the intensive care unit due to multiple organ failure. Subcapsular hepatic haematoma after endoscopic retrograde cholangiopancreatography is a rare complication, with few cases reported in the literature. Treatment described in the literature is conservative, resulting in a satisfactory resolution. Copyright © 2015. Published by Masson Doyma México S.A.

Microwave-Assisted Preparation and Characterization of a Polyoxometalate-Based Inorganic 2D Framework Anode for Enhancing Lithium-Ion Battery Performance.

PubMed

Nie, Yan-Mei; Liang, Shuang; Yu, Wei-Dong; Yuan, Hao; Yan, Jun

2018-05-04

A pure inorganic 2D network molybdophosphate, [Mn 3 Mo 12 O 24 (OH) 6 (HPO 3 ) 8 (H 2 O) 6 ] 4- (1 a), synthesized through microwave irradiation with the existence of Mn 2+ and organic cations and isolated as [(CH 3 ) 2 NH 2 ] 3 Na[Mn 3 Mo 12 O 24 (OH) 6 (HPO 3 ) 8 (H 2 O) 6 ]⋅12 H 2 O (1), is found to possess highly enhanced performance in lithium-ion batteries' anode materials. The molecule shows multielectron redox properties suitable for producing anode materials with a specific capacity of 602 mA h g -1 at 100 mA g -1 after 50 cycles in lithium-ion batteries, although its specific capacity is the highest among all the reported pure inorganic 2D polyoxometalates to date, the cyclic stability is not that satisfactory. A hybrid nanocomposite of this 2D network and polypyrrole cations effectively reduces the capacity fading in initial cycles, and increases the stability and improves the electrochemical performance of lithium-ion batteries as well. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.