ORNL Evaluation of Electrabel Safety Cases for Doel 3 / Tihange 2: Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bass, Bennett Richard; Dickson, Terry L.; Gorti, Sarma B.

Oak Ridge National Laboratory (ORNL) performed a detailed technical review of the 2015 Electrabel (EBL) Safety Cases prepared for the Belgium reactor pressure vessels (RPVs) at Doel 3 and Tihange 2 (D3/T2). The Federal Agency for Nuclear Control (FANC) in Belgium commissioned ORNL to provide a thorough assessment of the existing safety margins against cracking of the RPVs due to the presence of almost laminar flaws found in each RPV. Initial efforts focused on surveying relevant literature that provided necessary background knowledge on the issues related to the quasilaminar flaws observed in D3/T2 reactors. Next, ORNL proceeded to develop anmore » independent quantitative assessment of the entire flaw population in the two Belgian reactors according to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XI, Appendix G, Fracture Toughness Criteria for Protection Against Failure, New York (1992 and 2004). That screening assessment of all EBL-characterized flaws in D3/T2 used ORNL tools, methodologies, and the ASME Code Case N-848, Alternative Characterization Rules for QuasiLaminar Flaws . Results and conclusions from the ORNL flaw acceptance assessments of D3/T2 were compared with those from the 2015 EBL Safety Cases. Specific findings of the ORNL evaluation of that part of the EBL structural integrity assessment focusing on stability of the flaw population subjected to primary design transients include the following: ORNL s analysis results were similar to those of EBL in that very few characterized flaws were found not compliant with the ASME (1992) acceptance criterion. ORNL s application of the more recent ASME Section XI (2004) produced only four noncompliant flaws, all due to LOCAs. The finding of a greater number of non-compliant flaws in the EBL screening assessment is due principally to a significantly more restrictive (conservative) criterion for flaw size acceptance used by EBL. ORNL s screening assessment results (obtained using an analysis methodology different from that of EBL) are interpreted herein as confirming the EBL screening results for D3/T2. ORNL s independent refined analysis demonstrated the EBL-characterized flaw 1660, which is non-compliant in the ORNL and EBL screening assessment, is rendered compliant when modeled as a more realistic individual quasi-laminar flaw using a 3-D XFEM analysis approach. ORNL s and EBL s refined analyses are in good agreement for the flaw 1660 close to the clad/base metal interface; ORNL is not persuaded that repeating this exercise for more than one non-compliant flaw is necessary to accept the EBL conclusions derived from the aggregate of EBL refined analysis results. ORNL General Conclusions Regarding the Structural Integrity Assessment (SIA) Conducted by EBL for D3/T2 Based on comparative evaluations of ORNL and EBL SIA analyses and on consideration of other results, ORNL is in agreement with the general conclusions reported by Electrabel in their RPV D3/T2 Technical Summary Note of April 14, 2015: More than 99 percent of flaws in D3/T2 meet the defined screening criterion, rendering them benign with respect to initiation in the event of a design transient. Refined analyses of non-compliant flaws from the screening assessment indicate that only 11 of the 16196 detected flaws have a critical reference-temperature material index (designated RTNDT) that implies the possibility of the initiation of cleavage fracture at some future time. For those 11 2 flaws, the calculated margin in RTNDT (a measure of acceptable embrittlement relative to end-ofservice-life conditions) is significant, being greater than 80 C. Fatigue crack growth is not a concern in the flaw-acceptability analyses. Primary stress re-evaluation confirms that the collapse pressure is more than 1.5 times the design pressure in the presence of defects detected in D3/T2. Sufficient conservatisms are built into the input data and into the different steps of the SIA; in some cases, those conservatisms are quantified and imply that additional margins exist in the SIA. Taken as a whole, the foregoing results and conclusions confirm the structural integrity of Doel 3 and Tihange 2 under all design transients with ample margin in the presence of the 16196 detected flaws.« less

Towards a Delamination Fatigue Methodology for Composite Materials

NASA Technical Reports Server (NTRS)

OBrien, Thomas K.

2007-01-01

A methodology that accounts for both delaminaton onset and growth in composite structural components is proposed for improved fatigue life prediction to reduce life cycle costs and improve accept/reject criteria for manufacturing flaws. The benefits of using a Delamination Onset Threshold (DOT) approach in combination with a Modified Damage Tolerance (MDT) approach is highlighted. The use of this combined approach to establish accept/reject criteria, requiring less conservative initial manufacturing flaw sizes, is illustrated.

An Overview of Meta-Analyses of Danhong Injection for Unstable Angina.

PubMed

Zhang, Xiaoxia; Wang, Hui; Chang, Yanxu; Wang, Yuefei; Lei, Xiang; Fu, Shufei; Zhang, Junhua

2015-01-01

Objective. To systematically collect evidence and evaluate the effects of Danhong injection (DHI) for unstable angina (UA). Methods. A comprehensive search was conducted in seven electronic databases up to January 2015. The methodological and reporting quality of included studies was assessed by using AMSTAR and PRISMA. Result. Five articles were included. The conclusions suggest that DHI plus conventional medicine treatment was effective for UA pectoris treatment, could alleviate symptoms of angina and ameliorate electrocardiograms. Flaws of the original studies and systematic reviews weaken the strength of evidence. Limitations of the methodology quality include performing an incomprehensive literature search, lacking detailed characteristics, ignoring clinical heterogeneity, and not assessing publication bias and other forms of bias. The flaws of reporting systematic reviews included the following: not providing a structured summary, no standardized search strategy. For the pooled findings, researchers took statistical heterogeneity into consideration, but clinical and methodology heterogeneity were ignored. Conclusion. DHI plus conventional medicine treatment generally appears to be effective for UA treatment. However, the evidence is not hard enough due to methodological flaws in original clinical trials and systematic reviews. Furthermore, rigorous designed randomized controlled trials are also needed. The methodology and reporting quality of systematic reviews should be improved.

An Overview of Meta-Analyses of Danhong Injection for Unstable Angina

PubMed Central

Zhang, Xiaoxia; Chang, Yanxu; Wang, Yuefei; Lei, Xiang; Fu, Shufei; Zhang, Junhua

2015-01-01

Objective. To systematically collect evidence and evaluate the effects of Danhong injection (DHI) for unstable angina (UA). Methods. A comprehensive search was conducted in seven electronic databases up to January 2015. The methodological and reporting quality of included studies was assessed by using AMSTAR and PRISMA. Result. Five articles were included. The conclusions suggest that DHI plus conventional medicine treatment was effective for UA pectoris treatment, could alleviate symptoms of angina and ameliorate electrocardiograms. Flaws of the original studies and systematic reviews weaken the strength of evidence. Limitations of the methodology quality include performing an incomprehensive literature search, lacking detailed characteristics, ignoring clinical heterogeneity, and not assessing publication bias and other forms of bias. The flaws of reporting systematic reviews included the following: not providing a structured summary, no standardized search strategy. For the pooled findings, researchers took statistical heterogeneity into consideration, but clinical and methodology heterogeneity were ignored. Conclusion. DHI plus conventional medicine treatment generally appears to be effective for UA treatment. However, the evidence is not hard enough due to methodological flaws in original clinical trials and systematic reviews. Furthermore, rigorous designed randomized controlled trials are also needed. The methodology and reporting quality of systematic reviews should be improved. PMID:26539221

Twenty years of meta-analyses in orthopaedic surgery: has quality kept up with quantity?

PubMed

Dijkman, Bernadette G; Abouali, Jihad A K; Kooistra, Bauke W; Conter, Henry J; Poolman, Rudolf W; Kulkarni, Abhaya V; Tornetta, Paul; Bhandari, Mohit

2010-01-01

As the number of studies in the literature is increasing, orthopaedic surgeons highly depend on meta-analyses as their primary source of scientific evidence. The objectives of this review were to assess the scientific quality and number of published meta-analyses on orthopaedics-related topics over time. We conducted, in duplicate and independently, a systematic review of published meta-analyses in orthopaedics in the years 2005 and 2008 and compared them with a previous systematic review of meta-analyses from 1969 to 1999. A search of electronic databases (MEDLINE, EMBASE, and the Cochrane Database of Systematic Reviews) was performed to identify meta-analyses published in 2005 and 2008. We searched bibliographies and contacted content experts to identify additional relevant studies. Two investigators independently assessed the quality of the studies, using the Oxman and Guyatt index, and abstracted relevant data. We included forty-five and forty-four meta-analyses from 2005 and 2008, respectively. While the number of meta-analyses increased fivefold from 1999 to 2008, the mean quality score did not change significantly over time (p = 0.067). In the later years, a significantly lower proportion of meta-analyses had methodological flaws (56% in 2005 and 68% in 2008) compared with meta-analyses published prior to 2000 (88%) (p = 0.006). In 2005 and 2008, respectively, 18% and 30% of the meta-analyses had major to extensive flaws in their methodology. Studies from 2008 with positive conclusions used and described appropriate criteria for the validity assessment less often than did those with negative results. The use of random-effects and fixed-effects models as pooling methods became more popular toward 2008. Although the methodological quality of orthopaedic meta-analyses has increased in the past twenty years, a substantial proportion continues to show major to extensive flaws. As the number of published meta-analyses is increasing, a routine checklist for scientific quality should be used in the peer-review process to ensure methodological standards for publication.

Applicability of a Conservative Margin Approach for Assessing NDE Flaw Detectability

NASA Technical Reports Server (NTRS)

Koshti, ajay M.

2007-01-01

Nondestructive Evaluation (NDE) procedures are required to detect flaws in structures with a high percentage detectability and high confidence. Conventional Probability of Detection (POD) methods are statistical in nature and require detection data from a relatively large number of flaw specimens. In many circumstances, due to the high cost and long lead time, it is impractical to build the large set of flaw specimens that is required by the conventional POD methodology. Therefore, in such situations it is desirable to have a flaw detectability estimation approach that allows for a reduced number of flaw specimens but provides a high degree of confidence in establishing the flaw detectability size. This paper presents an alternative approach called the conservative margin approach (CMA). To investigate the applicability of the CMA approach, flaw detectability sizes determined by the CMA and POD approaches have been compared on actual datasets. The results of these comparisons are presented and the applicability of the CMA approach is discussed.

Anthropogenic ``Global Warming'' Alarmism: Illuminating some Scientific and Methodological Flaws

NASA Astrophysics Data System (ADS)

Gould, Larry

2009-10-01

There continues to be an increasing number of scientists and public figures around the world who are challenging the dominant political- and mediadriven claims that have been bolstered by so-called ``consensus'' scientific views -- that dangerous ``global warming/climate change'' is caused primarily by human-produced carbon dioxide. This general talk will show that the weight of scientific evidence strongly contradicts the alarmist claims. It will also explain what are some of the methodological flaws that continue to threaten the scientific method.

Processing ultrasonic inspection data from multiple scan patterns for turbine rotor weld build-up evaluations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guan, Xuefei; Zhou, S. Kevin; Rasselkorde, El Mahjoub

The study presents a data processing methodology for weld build-up using multiple scan patterns. To achieve an overall high probability of detection for flaws with different orientations, an inspection procedure with three different scan patterns is proposed. The three scan patterns are radial-tangential longitude wave pattern, axial-radial longitude wave pattern, and tangential shear wave pattern. Scientific fusion of the inspection data is implemented using volume reconstruction techniques. The idea is to perform spatial domain forward data mapping for all sampling points. A conservative scheme is employed to handle the case that multiple sampling points are mapped to one grid location.more » The scheme assigns the maximum value for the grid location to retain the largest equivalent reflector size for the location. The methodology is demonstrated and validated using a realistic ring of weld build-up. Tungsten balls and bars are embedded to the weld build-up during manufacturing process to represent natural flaws. Flat bottomed holes and side drilled holes are installed as artificial flaws. Automatic flaw identification and extraction are demonstrated. Results indicate the inspection procedure with multiple scan patterns can identify all the artificial and natural flaws.« less

Processing ultrasonic inspection data from multiple scan patterns for turbine rotor weld build-up evaluations

NASA Astrophysics Data System (ADS)

Guan, Xuefei; Rasselkorde, El Mahjoub; Abbasi, Waheed; Zhou, S. Kevin

2015-03-01

The study presents a data processing methodology for weld build-up using multiple scan patterns. To achieve an overall high probability of detection for flaws with different orientations, an inspection procedure with three different scan patterns is proposed. The three scan patterns are radial-tangential longitude wave pattern, axial-radial longitude wave pattern, and tangential shear wave pattern. Scientific fusion of the inspection data is implemented using volume reconstruction techniques. The idea is to perform spatial domain forward data mapping for all sampling points. A conservative scheme is employed to handle the case that multiple sampling points are mapped to one grid location. The scheme assigns the maximum value for the grid location to retain the largest equivalent reflector size for the location. The methodology is demonstrated and validated using a realistic ring of weld build-up. Tungsten balls and bars are embedded to the weld build-up during manufacturing process to represent natural flaws. Flat bottomed holes and side drilled holes are installed as artificial flaws. Automatic flaw identification and extraction are demonstrated. Results indicate the inspection procedure with multiple scan patterns can identify all the artificial and natural flaws.

Gender Bias in the College Classroom: A Critical Review of the Literature and Implications for Future Research.

ERIC Educational Resources Information Center

Brady, Kristine L.; Eisler, Richard M.

1995-01-01

Summarizes eight studies on gender bias in college classrooms, examining the range of variables assessed and adequacy of evidence supporting the existence of bias. Inconsistent findings and significant methodological flaws in existing literature suggest that more empirical research is needed to investigate the existence of gender bias in college…

Proof test methodology for composites

NASA Technical Reports Server (NTRS)

Wu, Edward M.; Bell, David K.

1992-01-01

The special requirements for proof test of composites are identified based on the underlying failure process of composites. Two proof test methods are developed to eliminate the inevitable weak fiber sites without also causing flaw clustering which weakens the post-proof-test composite. Significant reliability enhancement by these proof test methods has been experimentally demonstrated for composite strength and composite life in tension. This basic proof test methodology is relevant to the certification and acceptance of critical composite structures. It can also be applied to the manufacturing process development to achieve zero-reject for very large composite structures.

The probability of flaw detection and the probability of false calls in nondestructive evaluation equipment

NASA Technical Reports Server (NTRS)

Temple, Enoch C.

1994-01-01

The space industry has developed many composite materials that have high durability in proportion to their weights. Many of these materials have a likelihood for flaws that is higher than in traditional metals. There are also coverings (such as paint) that develop flaws that may adversely affect the performance of the system in which they are used. Therefore there is a need to monitor the soundness of composite structures. To meet this monitoring need, many nondestructive evaluation (NDE) systems have been developed. An NDE system is designed to detect material flaws and make flaw measurements without destroying the inspected item. Also, the detection operation is expected to be performed in a rapid manner in a field or production environment. Some of the most recent video-based NDE methodologies are shearography, holography, thermography, and video image correlation.

The Dangerous Myth of Emerging Adulthood: An Evidence-Based Critique of a Flawed Developmental Theory

ERIC Educational Resources Information Center

Côté, James E.

2014-01-01

This article examines the theory of emerging adulthood, introduced into the literature by Arnett (2000), in terms of its methodological and evidential basis, and finds it to be unsubstantiated on numerous grounds. Other, more convincing, formulations of variations in the transition to adulthood are examined. Most flawed academic theories are…

Infrared Imaging of Carbon and Ceramic Composites: Data Reproducibility

NASA Astrophysics Data System (ADS)

Knight, B.; Howard, D. R.; Ringermacher, H. I.; Hudson, L. D.

2010-02-01

Infrared NDE techniques have proven to be superior for imaging of flaws in ceramic matrix composites (CMC) and carbon silicon carbide composites (C/SiC). Not only can one obtain accurate depth gauging of flaws such as delaminations and layered porosity in complex-shaped components such as airfoils and other aeronautical components, but also excellent reproducibility of image data is obtainable using the STTOF (Synthetic Thermal Time-of-Flight) methodology. The imaging of large complex shapes is fast and reliable. This methodology as applied to large C/SiC flight components at the NASA Dryden Flight Research Center will be described.

Formal verification of a fault tolerant clock synchronization algorithm

NASA Technical Reports Server (NTRS)

Rushby, John; Vonhenke, Frieder

1989-01-01

A formal specification and mechanically assisted verification of the interactive convergence clock synchronization algorithm of Lamport and Melliar-Smith is described. Several technical flaws in the analysis given by Lamport and Melliar-Smith were discovered, even though their presentation is unusally precise and detailed. It seems that these flaws were not detected by informal peer scrutiny. The flaws are discussed and a revised presentation of the analysis is given that not only corrects the flaws but is also more precise and easier to follow. Some of the corrections to the flaws require slight modifications to the original assumptions underlying the algorithm and to the constraints on its parameters, and thus change the external specifications of the algorithm. The formal analysis of the interactive convergence clock synchronization algorithm was performed using the Enhanced Hierarchical Development Methodology (EHDM) formal specification and verification environment. This application of EHDM provides a demonstration of some of the capabilities of the system.

Risk assessment of turbine rotor failure using probabilistic ultrasonic non-destructive evaluations

NASA Astrophysics Data System (ADS)

Guan, Xuefei; Zhang, Jingdan; Zhou, S. Kevin; Rasselkorde, El Mahjoub; Abbasi, Waheed A.

2014-02-01

The study presents a method and application of risk assessment methodology for turbine rotor fatigue failure using probabilistic ultrasonic nondestructive evaluations. A rigorous probabilistic modeling for ultrasonic flaw sizing is developed by incorporating the model-assisted probability of detection, and the probability density function (PDF) of the actual flaw size is derived. Two general scenarios, namely the ultrasonic inspection with an identified flaw indication and the ultrasonic inspection without flaw indication, are considered in the derivation. To perform estimations for fatigue reliability and remaining useful life, uncertainties from ultrasonic flaw sizing and fatigue model parameters are systematically included and quantified. The model parameter PDF is estimated using Bayesian parameter estimation and actual fatigue testing data. The overall method is demonstrated using a realistic application of steam turbine rotor, and the risk analysis under given safety criteria is provided to support maintenance planning.

Investigating the Effectiveness of Special Education: An Analysis of Methodology.

ERIC Educational Resources Information Center

Tindal, Gerald

1985-01-01

The review examines evaluations of the efficacy of special education programs for mildly disabled children. The author suggests that serious methodological flaws make our present knowledge in this area very weak and proposes a methodology to address and overcome many of the limitations of previous research. (Author)

Complexity, Representation and Practice: Case Study as Method and Methodology

ERIC Educational Resources Information Center

Miles, Rebecca

2015-01-01

While case study is considered a common approach to examining specific and particular examples in research disciplines such as law, medicine and psychology, in the social sciences case study is often treated as a lesser, flawed or undemanding methodology which is less valid, reliable or theoretically rigorous than other methodologies. Building on…

Underestimating the Educability of Down's Syndrome Children: Examination of Methodological Problems in Recent Literature

ERIC Educational Resources Information Center

And Others; Rynders, John E.

1978-01-01

For many years, the educational capabilities of Down's syndrome persons have been underestimated because a large number of studies purporting to give an accurate picture of Down's syndrome persons' developmental capabilities have had serious methodological flaws. (Author)

Flawed gun policy research could endanger public safety.

PubMed Central

Webster, D W; Vernick, J S; Ludwig, J; Lester, K J

1997-01-01

A highly publicized recent study by Lott and Mustard concludes that laws easing restrictions on licenses for carrying concealed firearms in public substantially reduce violent crime. Several serious flaws in the study render the authors' conclusions insupportable. These flaws include misclassification of gun-carrying laws, endogeneity of predictor variables, omission of confounding variables, and failure to control for the cyclical nature of crime trends. Most of these problems should bias results toward overestimating the crime-reducing effects of laws making it easier to carry concealed firearms in public. Lott and Mustard's statistical models produce findings inconsistent with criminological theories and well-established facts about crime, and subsequent reanalysis of their data challenges their conclusions. Public health professionals should understand the methodological issues raised in this commentary, particularly when flawed research could influence the introduction of policies with potentially deleterious consequences. PMID:9224169

Stress Optical Coefficient, Test Methodology, and Glass Standard Evaluation

DTIC Science & Technology

2016-05-01

identifying and mapping flaw size distributions on glass surfaces for predicting mechanical response. International Journal of Applied Glass ...ARL-TN-0756 ● MAY 2016 US Army Research Laboratory Stress Optical Coefficient, Test Methodology, and Glass Standard Evaluation...Stress Optical Coefficient, Test Methodology, and Glass Standard Evaluation by Clayton M Weiss Oak Ridge Institute for Science and Education

Toward the Long-Term Scientific Study of Encounter Group Phenomena: I. Methodological Considerations.

ERIC Educational Resources Information Center

Diamond, Michael Jay; Shapiro, Jerrold Lee

This paper proposes a model for the long-term scientific study of encounter, T-, and sensitivity groups. The authors see the need for overcoming major methodological and design inadequacies of such research. They discuss major methodological flaws in group outcome research as including: (1) lack of adequate base rate or pretraining measures; (2)…

Simulating the x-ray image contrast to setup techniques with desired flaw detectability

NASA Astrophysics Data System (ADS)

Koshti, Ajay M.

2015-04-01

The paper provides simulation data of previous work by the author in developing a model for estimating detectability of crack-like flaws in radiography. The methodology is developed to help in implementation of NASA Special x-ray radiography qualification, but is generically applicable to radiography. The paper describes a method for characterizing the detector resolution. Applicability of ASTM E 2737 resolution requirements to the model are also discussed. The paper describes a model for simulating the detector resolution. A computer calculator application, discussed here, also performs predicted contrast and signal-to-noise ratio calculations. Results of various simulation runs in calculating x-ray flaw size parameter and image contrast for varying input parameters such as crack depth, crack width, part thickness, x-ray angle, part-to-detector distance, part-to-source distance, source sizes, and detector sensitivity and resolution are given as 3D surfaces. These results demonstrate effect of the input parameters on the flaw size parameter and the simulated image contrast of the crack. These simulations demonstrate utility of the flaw size parameter model in setting up x-ray techniques that provide desired flaw detectability in radiography. The method is applicable to film radiography, computed radiography, and digital radiography.

Psychosocial development in racially and ethnically diverse youth: conceptual and methodological challenges in the 21st century.

PubMed

Swanson, Dena Phillips; Spencer, Margaret Beale; Harpalani, Vinay; Dupree, Davido; Noll, Elizabeth; Ginzburg, Sofia; Seaton, Gregory

2003-01-01

As the US population becomes more diverse in the 21st century, researchers face many conceptual and methodological challenges in working with diverse populations. We discuss these issues for racially and ethnically diverse youth, using Spencer's phenomenological variant of ecological systems theory (PVEST) as a guiding framework. We present a brief historical background and discuss recurring conceptual flaws in research on diverse youth, presenting PVEST as a corrective to these flaws. We highlight the interaction of race, culture, socioeconomic status, and various contexts of development with identity formation and other salient developmental processes. Challenges in research design and interpretation of data are also covered with regard to both assessment of contexts and developmental processes. We draw upon examples from neighborhood assessments, ethnic identity development, and attachment research to illustrate conceptual and methodological challenges, and we discuss strategies to address these challenges. The policy implications of our analysis are also considered.

College Rankings. ERIC Digest.

ERIC Educational Resources Information Center

Holub, Tamara

The popularity of college ranking surveys published by "U.S. News and World Report" and other magazines is indisputable, but the methodologies used to measure the quality of higher education institutions have come under fire by scholars and college officials. Criticisms have focused on methodological flaws, such as failure to consider…

Steam generator tubes integrity: In-service-inspection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Comby, R.J.

1997-02-01

The author`s approach to tube integrity is in terms of looking for flaws in tubes. The basis for this approach is that no simple rules can be fixed to adopt a universal inspection methodology because of various concepts related to experience, leak acceptance, leak before break approach, etc. Flaw specific management is probably the most reliable approach as a compromise between safety, availability and economic issues. In that case, NDE capabilities have to be in accordance with information required by structural integrity demonstration. The author discusses the types of probes which can be used to search for flaws in additionmore » to the types of flaws which are being sought, with examples of specific analysis experiences. The author also discusses the issue of a reporting level as it relates to avoiding false calls, classifying faults, and allowing for automation in analysis.« less

Sampling flies or sampling flaws? Experimental design and inference strength in forensic entomology.

PubMed

Michaud, J-P; Schoenly, Kenneth G; Moreau, G

2012-01-01

Forensic entomology is an inferential science because postmortem interval estimates are based on the extrapolation of results obtained in field or laboratory settings. Although enormous gains in scientific understanding and methodological practice have been made in forensic entomology over the last few decades, a majority of the field studies we reviewed do not meet the standards for inference, which are 1) adequate replication, 2) independence of experimental units, and 3) experimental conditions that capture a representative range of natural variability. Using a mock case-study approach, we identify design flaws in field and lab experiments and suggest methodological solutions for increasing inference strength that can inform future casework. Suggestions for improving data reporting in future field studies are also proposed.

Interventions for Behaviorally Disordered Students: A Quantitative Review and Methodological Critique.

ERIC Educational Resources Information Center

Skiba, Russell; Casey, Ann

1985-01-01

Results of three forms of meta-analysis on 41 studies involving behavior disorders revealed powerful effects of treatment: both interventions targeting classroom behavior and those attributable to a behavioral orientation were somewhat more powerful and robust. Methodological flaws, however, are cited. Recommendations for solidifying the research…

Public Relations Telephone Surveys: Avoiding Methodological Debacles.

ERIC Educational Resources Information Center

Stone, Gerald C.

1996-01-01

Reports that a study revealed a serious methodological flaw in interviewer bias in telephone surveys. States that most surveys, using standard detection measures, would not find the defect, but outcomes were so misleading that a campaign using the results would be doomed. Warns about practitioner telephone surveys; suggests special precautions if…

Respondent Techniques for Reduction of Emotions Limiting School Adjustment: A Quantitative Review and Methodological Critique.

ERIC Educational Resources Information Center

Misra, Anjali; Schloss, Patrick J.

1989-01-01

The critical analysis of 23 studies using respondent techniques for the reduction of excessive emotional reactions in school children focuses on research design, dependent variables, independent variables, component analysis, and demonstrations of generalization and maintenance. Results indicate widespread methodological flaws that limit the…

Detection and assessment of flaws in friction stir welded metallic plates

NASA Astrophysics Data System (ADS)

Fakih, Mohammad Ali; Mustapha, Samir; Tarraf, Jaafar; Ayoub, Georges; Hamade, Ramsey

2017-04-01

Investigated is the ability of ultrasonic guided waves to detect flaws and assess the quality of friction stir welds (FSW). AZ31B magnesium plates were friction stir welded. While process parameters of spindle speed and tool feed were fixed, shoulder penetration depth was varied resulting in welds of varying quality. Ultrasonic waves were excited at different frequencies using piezoelectric wafers and the fundamental symmetric (S0) mode was selected to detect the flaws resulting from the welding process. The front of the first transmitted wave signal was used to capture the S0 mode. A damage index (DI) measure was defined based on the amplitude attenuation after wave interaction with the welded zone. Computed Tomography (CT) scanning was employed as a nondestructive testing (NDT) technique to assess the actual weld quality. Derived DI values were plotted against CT-derived flaw volume resulting in a perfectly linear fit. The proposed approach showed high sensitivity of the S0 mode to internal flaws within the weld. As such, this methodology bears great potential as a future predictive method for the evaluation of FSW weld quality.

'Moral distress'--time to abandon a flawed nursing construct?

PubMed

Johnstone, Megan-Jane; Hutchinson, Alison

2015-02-01

Moral distress has been characterised in the nursing literature as a major problem affecting nurses in all healthcare systems. It has been portrayed as threatening the integrity of nurses and ultimately the quality of patient care. However, nursing discourse on moral distress is not without controversy. The notion itself is conceptually flawed and suffers from both theoretical and practical difficulties. Nursing research investigating moral distress is also problematic on account of being methodologically weak and disparate. Moreover, the ultimate purpose and significance of the research is unclear. In light of these considerations, it is contended that the notion of moral distress ought to be abandoned and that concerted attention be given to advancing inquiries that are more conducive to improving the quality and safety of moral decision-making, moral conduct and moral outcomes in nursing and healthcare domains. © The Author(s) 2013.

Simulating the X-Ray Image Contrast to Set-Up Techniques with Desired Flaw Detectability

NASA Technical Reports Server (NTRS)

Koshti, Ajay M.

2015-01-01

The paper provides simulation data of previous work by the author in developing a model for estimating detectability of crack-like flaws in radiography. The methodology is being developed to help in implementation of NASA Special x-ray radiography qualification, but is generically applicable to radiography. The paper describes a method for characterizing X-ray detector resolution for crack detection. Applicability of ASTM E 2737 resolution requirements to the model are also discussed. The paper describes a model for simulating the detector resolution. A computer calculator application, discussed here, also performs predicted contrast and signal-to-noise ratio calculations. Results of various simulation runs in calculating x-ray flaw size parameter and image contrast for varying input parameters such as crack depth, crack width, part thickness, x-ray angle, part-to-detector distance, part-to-source distance, source sizes, and detector sensitivity and resolution are given as 3D surfaces. These results demonstrate effect of the input parameters on the flaw size parameter and the simulated image contrast of the crack. These simulations demonstrate utility of the flaw size parameter model in setting up x-ray techniques that provide desired flaw detectability in radiography. The method is applicable to film radiography, computed radiography, and digital radiography.

The ability of winter grazing to reduce wildfire size, intensity ...

EPA Pesticide Factsheets

A recent study by Davies et al. sought to test whether winter grazing could reduce wildfire size, fire behavior metrics, and fire-induced plant mortality in shrub-grasslands. The authors concluded that ungrazed rangelands may experience more fire-induced mortality of native perennial bunchgrasses. The authors also presented several statements regarding the benefits of winter grazing on post-fire plant community responses. However, this commentary will show that the study by Davies et al. has underlying methodological flaws, lacks data necessary to support their conclusions, and does not provide an accurate discussion on the effect of grazing on rangeland ecosystems. Importantly, Davies et al. presented no data on the post-fire mortality of the perennial bunchgrasses or on the changes in plant community composition following their experimental fires. Rather, Davies et al. inferred these conclusions based off their observed fire behavior metrics of maximum temperature and a term described as the “heat load”. However, neither metric is appropriate for elucidating the heat flux impacts on plants. This lack of post-fire data, several methodological flaws, and the use of inadequate metrics describing heat cast doubts on the authors’ ability to support their stated conclusions. This article is a commentary highlights the scientific shortcomings in a forthcoming paper by Davies et al. in the International Journal of Wildland Fire. The study has methodological flaw

Major Life Events and Daily Hassles in Predicting Health Status: Methodological Inquiry.

ERIC Educational Resources Information Center

Flannery, Raymond B., Jr.

1986-01-01

Hypothesized that both major life events and daily hassles would be associated with anxiety and depression symptomatology. While the results partially support the hypothesis, the inconsistent findings suggest methodological flaws in each life stress measure. Reviews these limitations and presents the use of the semi-structured interview as one…

The Self-Concept. Volume 1, A Review of Methodological Considerations and Measuring Instruments. Revised Edition.

ERIC Educational Resources Information Center

Wylie, Ruth C.

This volume of the revised edition describes and evaluates measurement methods, research designs, and procedures which have been or might appropriately be used in self-concept research. Working from the perspective that self-concept or phenomenal personality theories can be scientifically investigated, methodological flaws and questionable…

Systematic reviews identify important methodological flaws in stroke rehabilitation therapy primary studies: review of reviews.

PubMed

Santaguida, Pasqualina; Oremus, Mark; Walker, Kathryn; Wishart, Laurie R; Siegel, Karen Lohmann; Raina, Parminder

2012-04-01

A "review of reviews" was undertaken to assess methodological issues in studies evaluating nondrug rehabilitation interventions in stroke patients. MEDLINE, CINAHL, PsycINFO, and the Cochrane Database of Systematic Reviews were searched from January 2000 to January 2008 within the stroke rehabilitation setting. Electronic searches were supplemented by reviews of reference lists and citations identified by experts. Eligible studies were systematic reviews; excluded citations were narrative reviews or reviews of reviews. Review characteristics and criteria for assessing methodological quality of primary studies within them were extracted. The search yielded 949 English-language citations. We included a final set of 38 systematic reviews. Cochrane reviews, which have a standardized methodology, were generally of higher methodological quality than non-Cochrane reviews. Most systematic reviews used standardized quality assessment criteria for primary studies, but not all were comprehensive. Reviews showed that primary studies had problems with randomization, allocation concealment, and blinding. Baseline comparability, adverse events, and co-intervention or contamination were not consistently assessed. Blinding of patients and providers was often not feasible and was not evaluated as a source of bias. The eligible systematic reviews identified important methodological flaws in the evaluated primary studies, suggesting the need for improvement of research methods and reporting. Copyright © 2012 Elsevier Inc. All rights reserved.

Alzheimer’s Disease Drug Development in 2008 and Beyond: Problems and Opportunities

PubMed Central

Becker, Robert E.; Greig, Nigel H.

2008-01-01

Recently, a number of Alzheimer’s disease (AD) multi-center clinical trials (CT) have failed to provide statistically significant evidence of drug efficacy. To test for possible design or execution flaws we analyzed in detail CTs for two failed drugs that were strongly supported by preclinical evidence and by proven CT AD efficacy for other drugs in their class. Studies of the failed commercial trials suggest that methodological flaws may contribute to the failures and that these flaws lurk within current drug development practices ready to impact other AD drug development [1]. To identify and counter risks we considered the relevance to AD drug development of the following factors: (1) effective dosing of the drug product, (2) reliable evaluations of research subjects, (3) effective implementation of quality controls over data at research sites, (4) resources for practitioners to effectively use CT results in patient care, (5) effective disease modeling, (6) effective research designs. New drugs currently under development for AD address a variety of specific mechanistic targets. Mechanistic targets provide AD drug development opportunities to escape from many of the factors that currently undermine AD clinical pharmacology, especially the problems of inaccuracy and imprecision associated with using rated outcomes. In this paper we conclude that many of the current problems encountered in AD drug development can be avoided by changing practices. Current problems with human errors in clinical trials make it difficult to differentiate drugs that fail to evidence efficacy from apparent failures due to Type II errors. This uncertainty and the lack of publication of negative data impede researchers’ abilities to improve methodologies in clinical pharmacology and to develop a sound body of knowledge about drug actions. We consider the identification of molecular targets as offering further opportunities for overcoming current failures in drug development. PMID:18690832

Structural Design Methodology Based on Concepts of Uncertainty

NASA Technical Reports Server (NTRS)

Lin, K. Y.; Du, Jiaji; Rusk, David

2000-01-01

In this report, an approach to damage-tolerant aircraft structural design is proposed based on the concept of an equivalent "Level of Safety" that incorporates past service experience in the design of new structures. The discrete "Level of Safety" for a single inspection event is defined as the compliment of the probability that a single flaw size larger than the critical flaw size for residual strength of the structure exists, and that the flaw will not be detected. The cumulative "Level of Safety" for the entire structure is the product of the discrete "Level of Safety" values for each flaw of each damage type present at each location in the structure. Based on the definition of "Level of Safety", a design procedure was identified and demonstrated on a composite sandwich panel for various damage types, with results showing the sensitivity of the structural sizing parameters to the relative safety of the design. The "Level of Safety" approach has broad potential application to damage-tolerant aircraft structural design with uncertainty.

The flaws in the detail of an observational study on transcatheter aortic valve implantation versus surgical aortic valve replacement in intermediate-risks patients.

PubMed

Barili, Fabio; Freemantle, Nick; Folliguet, Thierry; Muneretto, Claudio; De Bonis, Michele; Czerny, Martin; Obadia, Jean Francois; Al-Attar, Nawwar; Bonaros, Nikolaos; Kluin, Jolanda; Lorusso, Roberto; Punjabi, Prakash; Sadaba, Rafael; Suwalski, Piotr; Benedetto, Umberto; Böning, Andreas; Falk, Volkmar; Sousa-Uva, Miguel; Kappetein, Pieter A; Menicanti, Lorenzo

2017-06-01

The PARTNER group recently published a comparison between the latest generation SAPIEN 3 transcatheter aortic valve implantation (TAVI) system (Edwards Lifesciences, Irvine, CA, USA) and surgical aortic valve replacement (SAVR) in intermediate-risk patients, apparently demonstrating superiority of the TAVI and suggesting that TAVI might be the preferred treatment method in this risk class of patients. Nonetheless, assessment of the non-randomized methodology used in this comparison reveals challenges that should be addressed in order to elucidate the validity of the results. The study by Thourani and colleagues showed several major methodological concerns: suboptimal methods in propensity score analysis with evident misspecification of the propensity scores (PS; no adjustment for the most significantly different covariates: left ventricular ejection fraction, moderate-severe mitral regurgitation and associated procedures); use of PS quintiles rather than matching; inference on not-adjusted Kaplan-Meier curves, although the authors correctly claimed for the need of balancing score adjusting for confounding factors in order to have unbiased estimates of the treatment effect; evidence of poor fit; lack of data on valve-related death.These methodological flaws invalidate direct comparison between treatments and cannot support authors' conclusions that TAVI with SAPIEN 3 in intermediate-risk patients is superior to surgery and might be the preferred treatment alternative to surgery. © The Author 2017. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Methodological Flaws in Corpus-Based Studies on Malaysian ESL Textbooks

ERIC Educational Resources Information Center

Zarifi, Abdolvahed; Mukundan, Jayakaran; Rezvani Kalajahi, Seyed Ali

2014-01-01

With the increasing interest among the pedagogy researchers in the use of corpus linguistics methodologies to study textbooks, there has emerged a similar enthusiasm among the materials developers to draw on empirical findings in the development of the state-of-the-art curricula and syllabi. In order for these research findings to have their…

Are men and women equally violent to intimate partners?

PubMed

Taft, A; Hegarty, K; Flood, M

2001-12-01

Violence against women is a significant public health issue. One form of violence against women, intimate partner abuse or domestic violence, is prevalent in Australia. In this article, we summarise the main theoretical and methodological debates informing prevalence research in this area. We explain why studies finding equivalent victimisation and perpetration rates between the sexes are conceptually and methodologically flawed and why coercion and control are fundamental to the definition and measurement of partner abuse. We conclude that while male victims of partner abuse certainly exist, male victims of other forms of male violence are more prevalent. A focus on gendered risk of violence in public health policy should target male-to-male public violence and male-to-female intimate partner abuse.

A Systematic Overview of Reviews for Complementary and Alternative Therapies in the Treatment of the Fibromyalgia Syndrome

PubMed Central

Häuser, Winfried; Dobos, Gustav; Langhorst, Jost

2015-01-01

Objectives. This systematic overview of reviews aimed to summarize evidence and methodological quality from systematic reviews of complementary and alternative medicine (CAM) for the fibromyalgia syndrome (FMS). Methods. The PubMed/MEDLINE, Cochrane Library, and Scopus databases were screened from their inception to Sept 2013 to identify systematic reviews and meta-analyses of CAM interventions for FMS. Methodological quality of reviews was rated using the AMSTAR instrument. Results. Altogether 25 systematic reviews were found; they investigated the evidence of CAM in general, exercised-based CAM therapies, manipulative therapies, Mind/Body therapies, acupuncture, hydrotherapy, phytotherapy, and homeopathy. Methodological quality of reviews ranged from lowest to highest possible quality. Consistently positive results were found for tai chi, yoga, meditation and mindfulness-based interventions, hypnosis or guided imagery, electromyogram (EMG) biofeedback, and balneotherapy/hydrotherapy. Inconsistent results concerned qigong, acupuncture, chiropractic interventions, electroencephalogram (EEG) biofeedback, and nutritional supplements. Inconclusive results were found for homeopathy and phytotherapy. Major methodological flaws included missing details on data extraction process, included or excluded studies, study details, and adaption of conclusions based on quality assessment. Conclusions. Despite a growing body of scientific evidence of CAM therapies for the management of FMS systematic reviews still show methodological flaws limiting definite conclusions about their efficacy and safety. PMID:26246841

A Systematic Overview of Reviews for Complementary and Alternative Therapies in the Treatment of the Fibromyalgia Syndrome.

PubMed

Lauche, Romy; Cramer, Holger; Häuser, Winfried; Dobos, Gustav; Langhorst, Jost

2015-01-01

Objectives. This systematic overview of reviews aimed to summarize evidence and methodological quality from systematic reviews of complementary and alternative medicine (CAM) for the fibromyalgia syndrome (FMS). Methods. The PubMed/MEDLINE, Cochrane Library, and Scopus databases were screened from their inception to Sept 2013 to identify systematic reviews and meta-analyses of CAM interventions for FMS. Methodological quality of reviews was rated using the AMSTAR instrument. Results. Altogether 25 systematic reviews were found; they investigated the evidence of CAM in general, exercised-based CAM therapies, manipulative therapies, Mind/Body therapies, acupuncture, hydrotherapy, phytotherapy, and homeopathy. Methodological quality of reviews ranged from lowest to highest possible quality. Consistently positive results were found for tai chi, yoga, meditation and mindfulness-based interventions, hypnosis or guided imagery, electromyogram (EMG) biofeedback, and balneotherapy/hydrotherapy. Inconsistent results concerned qigong, acupuncture, chiropractic interventions, electroencephalogram (EEG) biofeedback, and nutritional supplements. Inconclusive results were found for homeopathy and phytotherapy. Major methodological flaws included missing details on data extraction process, included or excluded studies, study details, and adaption of conclusions based on quality assessment. Conclusions. Despite a growing body of scientific evidence of CAM therapies for the management of FMS systematic reviews still show methodological flaws limiting definite conclusions about their efficacy and safety.

What's the Difference, Still? A Follow-Up Review of the Quantitative Research Methodology in Distance Learning

ERIC Educational Resources Information Center

Randolph, Justus

2005-01-01

A high quality review of the distance learning literature from 1992-1999 concluded that most of the research on distance learning had serious methodological flaws. This paper presents the results of a small-scale replication of that review. From three leading distance education journals, a sample of 66 articles was categorized by study type and…

A novel approach to measuring response and remission in schizophrenia in clinical trials.

PubMed

Aboraya, Ahmed; Leucht, Stefan; Nasrallah, Henry A; Samara, Myrto; Haro, Josep Maria; Elshazly, Ahmed; Zangeneh, Masood

2017-12-01

Pharmaceutical companies conduct clinical trials to show the efficacy and safety of new medications for the treatment of schizophrenia. After the new medications are marketed, clinicians treating patients with schizophrenia discover that a considerable number of patients do not respond to these new medications. The goals of the review are to examine the methodology and design of recent antipsychotic clinical trials, identify common flaws, and propose guidelines to fix the flaws and improve the quality of future clinical trials of antipsychotic medications. A review of recent antipsychotic clinical trials was conducted using a PubMed search. Ten recent trials published in the past four years were reviewed and their methods analyzed and critiqued. The authors identified six major methodological flaws that may explain the suboptimal response in many patients after a drug is approved. Most of the flaws are related to eligibility criteria, the misuse of the Positive and Negative Syndromes Scale (PANSS) and the lack of consensus on how to define remission, response and exacerbation in schizophrenia. Proposed guidelines for a more rigorous use of the PANSS are presented and recommendations are proposed for using uniform criteria for remission, response and exacerbation in schizophrenia. The authors recommend using standardized diagnostic interviews to screen patients for eligibility criteria and using the PANSS according to the author's recommendations and the proposed guidelines. Uniform criteria to define remission, response and exacerbation are recommended for clinical trials examining the efficacy and safety of antipsychotic drugs in schizophrenia. Copyright © 2017 Elsevier B.V. All rights reserved.

Multi-resolution analysis for region of interest extraction in thermographic nondestructive evaluation

NASA Astrophysics Data System (ADS)

Ortiz-Jaramillo, B.; Fandiño Toro, H. A.; Benitez-Restrepo, H. D.; Orjuela-Vargas, S. A.; Castellanos-Domínguez, G.; Philips, W.

2012-03-01

Infrared Non-Destructive Testing (INDT) is known as an effective and rapid method for nondestructive inspection. It can detect a broad range of near-surface structuring flaws in metallic and composite components. Those flaws are modeled as a smooth contour centered at peaks of stored thermal energy, termed Regions of Interest (ROI). Dedicated methodologies must detect the presence of those ROIs. In this paper, we present a methodology for ROI extraction in INDT tasks. The methodology deals with the difficulties due to the non-uniform heating. The non-uniform heating affects low spatial/frequencies and hinders the detection of relevant points in the image. In this paper, a methodology for ROI extraction in INDT using multi-resolution analysis is proposed, which is robust to ROI low contrast and non-uniform heating. The former methodology includes local correlation, Gaussian scale analysis and local edge detection. In this methodology local correlation between image and Gaussian window provides interest points related to ROIs. We use a Gaussian window because thermal behavior is well modeled by Gaussian smooth contours. Also, the Gaussian scale is used to analyze details in the image using multi-resolution analysis avoiding low contrast, non-uniform heating and selection of the Gaussian window size. Finally, local edge detection is used to provide a good estimation of the boundaries in the ROI. Thus, we provide a methodology for ROI extraction based on multi-resolution analysis that is better or equal compared with the other dedicate algorithms proposed in the state of art.

Social and Behavioral Characteristics of Chinese Only Children: A Review of Research.

ERIC Educational Resources Information Center

Chen, Jie-Qi; Goldsmith, Lynn T.

1991-01-01

Reviews the research comparing the social and behavioral characteristics of only children and children with siblings in China. Results are mixed, and many of the studies are seen as having methodological flaws. (BB)

An algorithm for analytical solution of basic problems featuring elastostatic bodies with cavities and surface flaws

NASA Astrophysics Data System (ADS)

Penkov, V. B.; Levina, L. V.; Novikova, O. S.; Shulmin, A. S.

2018-03-01

Herein we propose a methodology for structuring a full parametric analytical solution to problems featuring elastostatic media based on state-of-the-art computing facilities that support computerized algebra. The methodology includes: direct and reverse application of P-Theorem; methods of accounting for physical properties of media; accounting for variable geometrical parameters of bodies, parameters of boundary states, independent parameters of volume forces, and remote stress factors. An efficient tool to address the task is the sustainable method of boundary states originally designed for the purposes of computerized algebra and based on the isomorphism of Hilbertian spaces of internal states and boundary states of bodies. We performed full parametric solutions of basic problems featuring a ball with a nonconcentric spherical cavity, a ball with a near-surface flaw, and an unlimited medium with two spherical cavities.

Profitable failure: antidepressant drugs and the triumph of flawed experiments.

PubMed

McGoey, Linsey

2010-01-01

Drawing on an analysis of Irving Kirsch and colleagues' controversial 2008 article in "PLoS [Public Library of Science] Magazine" on the efficacy of SSRI antidepressant drugs such as Prozac, I examine flaws within the methodologies of randomized controlled trials (RCTs) that have made it difficult for regulators, clinicians and patients to determine the therapeutic value of this class of drug. I then argue, drawing analogies to work by Pierre Bourdieu and Michael Power, that it is the very limitations of RCTs -- their inadequacies in producing reliable evidence of clinical effects -- that help to strengthen assumptions of their superiority as methodological tools. Finally, I suggest that the case of RCTs helps to explore the question of why failure is often useful in consolidating the authority of those who have presided over that failure, and why systems widely recognized to be ineffective tend to assume greater authority at the very moment when people speak of their malfunction.

Research methodology in recurrent pregnancy loss.

PubMed

Christiansen, Ole B

2014-03-01

The aim of this article is to highlight pitfalls in research methodology that may explain why studies in recurrent pregnancy loss (RPL) often provide very divergent results. It is hoped that insight into this issue may help clinicians decide which published studies are the most valid. It may help researchers to eliminate methodological flaws in future studies, which may hopefully come to some kind of agreement about the usefulness of diagnostic tests and treatments in RPL. Copyright © 2014 Elsevier Inc. All rights reserved.

Women, Motivation, and Achievement.

ERIC Educational Resources Information Center

Hyde, Janet Shibley; Kling, Kristen C.

2001-01-01

Reviews psychological research on motivation and educational achievement, discussing gender and contributions by feminist researchers. Feminist psychologists note sex bias and methodological flaws in traditional research on achievement motivation, proposing improved models (Eccles' expectancy x value model of achievement behavior). Contrary to…

Return to Baseline: Some Comments on Smith's Reinterpretation of Seclusionary Timeout.

ERIC Educational Resources Information Center

Polsgrove, Lewis

1982-01-01

The author replies to an earlier contention of D. Smith (EC 133 830) that seclusionary timeout for behavior disordered children actually constitutes extinction rather than aversive control. The author cites methodological flaws in Smith's studies. (CL)

Heuristic Enhancement of Magneto-Optical Images for NDE

NASA Astrophysics Data System (ADS)

Cacciola, Matteo; Megali, Giuseppe; Pellicanò, Diego; Calcagno, Salvatore; Versaci, Mario; Morabito, FrancescoCarlo

2010-12-01

The quality of measurements in nondestructive testing and evaluation plays a key role in assessing the reliability of different inspection techniques. Each different technique, like the magneto-optic imaging here treated, is affected by some special types of noise which are related to the specific device used for their acquisition. Therefore, the design of even more accurate image processing is often required by relevant applications, for instance, in implementing integrated solutions for flaw detection and characterization. The aim of this paper is to propose a preprocessing procedure based on independent component analysis (ICA) to ease the detection of rivets and/or flaws in the specimens under test. A comparison of the proposed approach with some other advanced image processing methodologies used for denoising magneto-optic images (MOIs) is carried out, in order to show advantages and weakness of ICA in improving the accuracy and performance of the rivets/flaw detection.

Fatigue loading and R-curve behavior of a dental glass-ceramic with multiple flaw distributions

PubMed Central

Joshi, Gaurav V.; Duan, Yuanyuan; Bona, Alvaro Della; Hill, Thomas J.; John, Kenneth St.; Griggs, Jason A.

2013-01-01

Objectives To determine the effects of surface finish and mechanical loading on the rising toughness curve (R-curve) behavior of a fluorapatite glass-ceramic (IPS e.max ZirPress) and to determine a statistical model for fitting fatigue lifetime data with multiple flaw distributions. Materials and Methods Rectangular beam specimens were fabricated by pressing. Two groups of specimens (n=30) with polished (15 μm) or air abraded surface were tested under rapid monotonic loading in oil. Additional polished specimens were subjected to cyclic loading at 2 Hz (n=44) and 10 Hz (n=36). All fatigue tests were performed using a fully articulated four-point flexure fixture in 37°C water. Fractography was used to determine the critical flaw size and estimate fracture toughness. To prove the presence of R-curve behavior, non-linear regression was used. Forward stepwise regression was performed to determine the effects on fracture toughness of different variables, such as initial flaw type, critical flaw size, critical flaw eccentricity, cycling frequency, peak load, and number of cycles. Fatigue lifetime data were fit to an exclusive flaw model. Results There was an increase in fracture toughness values with increasing critical flaw size for both loading methods (rapid monotonic loading and fatigue). The values for the fracture toughness ranged from 0.75 to 1.1 MPa·m1/2 reaching a plateau at different critical flaw sizes based on loading method. Significance Cyclic loading had a significant effect on the R-curve behavior. The fatigue lifetime distribution was dependent on the flaw distribution, and it fit well to an exclusive flaw model. PMID:24034441

Collective Bargaining Laws and Teacher Strikes

ERIC Educational Resources Information Center

Colton, David L.

1978-01-01

Several methodological flaws were found in a Public Service Research Council study relating increases in public employee strikes with the adoption of bargaining statutes. A replication, using teachers, suggests some nonstatutory factors that may strongly affect the incidence of teacher strikes. (Author/IRT)

Scales and erosion

USDA-ARS?s Scientific Manuscript database

There is a need to develop scale explicit understanding of erosion to overcome existing conceptual and methodological flaws in our modelling methods currently applied to understand the process of erosion, transport and deposition at the catchment scale. These models need to be based on a sound under...

New Professionals in Academia: Notes from the Underrepresented.

ERIC Educational Resources Information Center

Stabb, Sally D.

1992-01-01

Responds to earlier issue of "Counseling Psychologist" on new and early professionals in academia. As new professional herself, the author discusses specific methodological flaws, data not included, and access and opportunity to be represented, focusing particularly on these issues within academia. (NB)

Standards and Methodological Rigor in Pulmonary Arterial Hypertension Preclinical and Translational Research.

PubMed

Provencher, Steeve; Archer, Stephen L; Ramirez, F Daniel; Hibbert, Benjamin; Paulin, Roxane; Boucherat, Olivier; Lacasse, Yves; Bonnet, Sébastien

2018-03-30

Despite advances in our understanding of the pathophysiology and the management of pulmonary arterial hypertension (PAH), significant therapeutic gaps remain for this devastating disease. Yet, few innovative therapies beyond the traditional pathways of endothelial dysfunction have reached clinical trial phases in PAH. Although there are inherent limitations of the currently available models of PAH, the leaky pipeline of innovative therapies relates, in part, to flawed preclinical research methodology, including lack of rigour in trial design, incomplete invasive hemodynamic assessment, and lack of careful translational studies that replicate randomized controlled trials in humans with attention to adverse effects and benefits. Rigorous methodology should include the use of prespecified eligibility criteria, sample sizes that permit valid statistical analysis, randomization, blinded assessment of standardized outcomes, and transparent reporting of results. Better design and implementation of preclinical studies can minimize inherent flaws in the models of PAH, reduce the risk of bias, and enhance external validity and our ability to distinguish truly promising therapies form many false-positive or overstated leads. Ideally, preclinical studies should use advanced imaging, study several preclinical pulmonary hypertension models, or correlate rodent and human findings and consider the fate of the right ventricle, which is the major determinant of prognosis in human PAH. Although these principles are widely endorsed, empirical evidence suggests that such rigor is often lacking in pulmonary hypertension preclinical research. The present article discusses the pitfalls in the design of preclinical pulmonary hypertension trials and discusses opportunities to create preclinical trials with improved predictive value in guiding early-phase drug development in patients with PAH, which will need support not only from researchers, peer reviewers, and editors but also from academic institutions, funding agencies, and animal ethics authorities. © 2018 American Heart Association, Inc.

The kidney allocation score: methodological problems, moral concerns and unintended consequences.

PubMed

Hippen, B

2009-07-01

The growing disparity between the demand for and supply of kidneys for transplantation has generated interest in alternative systems of allocating kidneys from deceased donors. This personal viewpoint focuses attention on the Kidney Allocation Score (KAS) proposal promulgated by the UNOS/OPTN Kidney Committee. I identify several methodological and moral flaws in the proposed system, concluding that any iteration of the KAS proposal should be met with more skepticism than sanguinity.

Knowledge: Genuine and Bogus

ERIC Educational Resources Information Center

Bunge, Mario

2011-01-01

Pseudoscience is error, substantive or methodological, parading as science. Obvious examples are parapsychology, "intelligent design," and homeopathy. Psychoanalysis and pop evolutionary psychology are less obvious, yet no less flawed in both method and doctrine. The fact that science can be faked to the point of deceiving science lovers suggests…

Leading-Edge Research or Lost Cause?: The Search for Interscriptual Stroop Effects.

ERIC Educational Resources Information Center

Benson, Philippa Jane

1991-01-01

Reviews studies on cross-orthographic Stroop interference tests. Critiques one of the first cross-orthographic Stroop studies to describe how such studies have been used to explore cognitive mechanisms involved in reading. Reviews conceptual and methodological flaws in the research. (PRA)

Initial Probabilistic Evaluation of Reactor Pressure Vessel Fracture with Grizzly and Raven

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Benjamin; Hoffman, William; Sen, Sonat

2015-10-01

The Grizzly code is being developed with the goal of creating a general tool that can be applied to study a variety of degradation mechanisms in nuclear power plant components. The first application of Grizzly has been to study fracture in embrittled reactor pressure vessels (RPVs). Grizzly can be used to model the thermal/mechanical response of an RPV under transient conditions that would be observed in a pressurized thermal shock (PTS) scenario. The global response of the vessel provides boundary conditions for local models of the material in the vicinity of a flaw. Fracture domain integrals are computed to obtainmore » stress intensity factors, which can in turn be used to assess whether a fracture would initiate at a pre-existing flaw. These capabilities have been demonstrated previously. A typical RPV is likely to contain a large population of pre-existing flaws introduced during the manufacturing process. This flaw population is characterized stastistically through probability density functions of the flaw distributions. The use of probabilistic techniques is necessary to assess the likelihood of crack initiation during a transient event. This report documents initial work to perform probabilistic analysis of RPV fracture during a PTS event using a combination of the RAVEN risk analysis code and Grizzly. This work is limited in scope, considering only a single flaw with deterministic geometry, but with uncertainty introduced in the parameters that influence fracture toughness. These results are benchmarked against equivalent models run in the FAVOR code. When fully developed, the RAVEN/Grizzly methodology for modeling probabilistic fracture in RPVs will provide a general capability that can be used to consider a wider variety of vessel and flaw conditions that are difficult to consider with current tools. In addition, this will provide access to advanced probabilistic techniques provided by RAVEN, including adaptive sampling and parallelism, which can dramatically decrease run times.« less

Fracture mechanics methodology: Evaluation of structural components integrity

NASA Astrophysics Data System (ADS)

Sih, G. C.; de Oliveira Faria, L.

1984-09-01

The application of fracture mechanics to structural-design problems is discussed in lectures presented in the AGARD Fracture Mechanics Methodology course held in Lisbon, Portugal, in June 1981. The emphasis is on aeronautical design, and chapters are included on fatigue-life prediction for metals and composites, the fracture mechanics of engineering structural components, failure mechanics and damage evaluation of structural components, flaw-acceptance methods, and reliability in probabilistic design. Graphs, diagrams, drawings, and photographs are provided.

Memory, Cognitive Processing, and the Process of "Listening": A Reply to Thomas and Levine.

ERIC Educational Resources Information Center

Bostrom, Robert N.

1996-01-01

Describes several "inaccurate" statements made in L. Thomas' and T. Levine's article in this journal (volume 21, page 103) regarding the current author's research and positions on the listening construct. Suggests that Thomas' and Levine's model has serious methodological flaws. (RS)

An Analysis of Methods Used to Examine Gender Differences in Computer-Related Behavior.

ERIC Educational Resources Information Center

Kay, Robin

1992-01-01

Review of research investigating gender differences in computer-related behavior examines statistical and methodological flaws. Issues addressed include sample selection, sample size, scale development, scale quality, the use of univariate and multivariate analyses, regressional analysis, construct definition, construct testing, and the…

Child Maltreatment Seriousness and Juvenile Delinquency.

ERIC Educational Resources Information Center

Doerner, William G.

1987-01-01

Methodological flaws have spoiled the literature that attempts to link maltreatment to juvenile delinquency. This article presents improved definitions and measuring procedures for maltreatment and delinquency. The empirical findings show that certain types of child abuse and neglect are related to delinquency but that other types of maltreatment…

Why Sex Based Language Differences are Elusive.

ERIC Educational Resources Information Center

Tyler, Mary

Paradoxically, linguists' speculations about sex differences in language use are highly plausible and yet have received little empirical support from well controlled studies. An experiment was designed to correct a flaw in earlier methodologies by sampling precisely the kinds of situations in which predicted differences (e.g., swearing,…

Differences among Sexually Abused and Nonabused Women from Functional and Dysfunctional Families.

ERIC Educational Resources Information Center

Brock, Kathleen J.; Mintz, Laurie B.; Good, Glenn E.

1997-01-01

Identifies a previously unexamined group of sexual abuse survivors (those from functional families) and addresses methodological flaws in previous research. Results indicate that women in the abused-dysfunctional group reported the highest level of psychological distress. Psychological distress reported by abused-functional women paralleled that…

(The Androgyny Dimension: A Comment on Stokes, Childs, and Fuehrer: And a Response.)

ERIC Educational Resources Information Center

Lubinski, David; Stokes, Joseph

1983-01-01

Suggests a critical methodological flaw in a study done about the relationship between the Bem Sex-Role Inventory and certain indices of self-disclosure (Stokes, et al.). Notes that multiple regression analysis was not performed in appropriate hierarchical fashion. Includes Stokes reply to the critique. (PAS)

The Pragmatic Skills of Learning Disabled Children: A Review.

ERIC Educational Resources Information Center

Dudley-Marling, Curtis

1985-01-01

Studies are reviewed in four topic areas: (1) learning disabled (LD) students' spontaneous use of language; (2) their ability to adapt language to listener characteristics; (3) effectiveness of their communications; and (4) their ability to fulfill listener responsibilities. Noted are methodological flaws which cast doubt on implications for…

The Effects of Computer Instruction on College Students' Reading Skills.

ERIC Educational Resources Information Center

Kuehner, Alison V.

1999-01-01

Reviews research concerning computer-based reading instruction for college students. Finds that most studies suggest that computers can provide motivating and efficient learning, but it is not clear whether the computer, or the instruction via computer, accounts for student gains. Notes many methodological flaws in the studies. Suggests…

The Myth of the L.D. WISC-R Profile.

ERIC Educational Resources Information Center

Miller, Maurice; Walker, Kenneth P.

1981-01-01

The review cites methodological and statistical flaws in studies attempting to identify subtest patterns on the Wechsler Intelligence Scale for Children-Revised indicative of learning disabilities (LD) and concludes that no LD pattern has been found and the search for such a pattern is not justified. (Author/CL)

Preclinical animal anxiety research - flaws and prejudices.

PubMed

Ennaceur, Abdelkader; Chazot, Paul L

2016-04-01

The current tests of anxiety in mice and rats used in preclinical research include the elevated plus-maze (EPM) or zero-maze (EZM), the light/dark box (LDB), and the open-field (OF). They are currently very popular, and despite their poor achievements, they continue to exert considerable constraints on the development of novel approaches. Hence, a novel anxiety test needs to be compared with these traditional tests, and assessed against various factors that were identified as a source of their inconsistent and contradictory results. These constraints are very costly, and they are in most cases useless as they originate from flawed methodologies. In the present report, we argue that the EPM or EZM, LDB, and OF do not provide unequivocal measures of anxiety; that there is no evidence of motivation conflict involved in these tests. They can be considered at best, tests of natural preference for unlit and/or enclosed spaces. We also argued that pharmacological validation of a behavioral test is an inappropriate approach; it stems from the confusion of animal models of human behavior with animal models of pathophysiology. A behavioral test is developed to detect not to produce symptoms, and a drug is used to validate an identified physiological target. In order to overcome the major methodological flaws in animal anxiety studies, we proposed an open space anxiety test, a 3D maze, which is described here with highlights of its various advantages over to the traditional tests.

Implementation of efficient trajectories for an ultrasonic scanner using chaotic maps

NASA Astrophysics Data System (ADS)

Almeda, A.; Baltazar, A.; Treesatayapun, C.; Mijarez, R.

2012-05-01

Typical ultrasonic methodology for nondestructive scanning evaluation uses systematic scanning paths. In many cases, this approach is time inefficient and also energy and computational power consuming. Here, a methodology for the scanning of defects using an ultrasonic echo-pulse scanning technique combined with chaotic trajectory generation is proposed. This is implemented in a Cartesian coordinate robotic system developed in our lab. To cover the entire search area, a chaotic function and a proposed mirror mapping were incorporated. To improve detection probability, our proposed scanning methodology is complemented with a probabilistic approach of discontinuity detection. The developed methodology was found to be more efficient than traditional ones used to localize and characterize hidden flaws.

The HMDS Coating Flaw Removal Tool

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monticelli, M V; Nostrand, M C; Mehta, N

2008-10-24

In many high energy laser systems, optics with HMDS sol gel antireflective coatings are placed in close proximity to each other making them particularly susceptible to certain types of strong optical interactions. During the coating process, halo shaped coating flaws develop around surface digs and particles. Depending on the shape and size of the flaw, the extent of laser light intensity modulation and consequent probability of damaging downstream optics may increase significantly. To prevent these defects from causing damage, a coating flaw removal tool was developed that deploys a spot of decane with a syringe and dissolves away the coatingmore » flaw. The residual liquid is evacuated leaving an uncoated circular spot approximately 1mm in diameter. The resulting uncoated region causes little light intensity modulation and thus has a low probability of causing damage in optics downstream from the mitigated flaw site.« less

Quality of systematic reviews in pediatric oncology--a systematic review.

PubMed

Lundh, Andreas; Knijnenburg, Sebastiaan L; Jørgensen, Anders W; van Dalen, Elvira C; Kremer, Leontien C M

2009-12-01

To ensure evidence-based decision making in pediatric oncology systematic reviews are necessary. The objective of our study was to evaluate the methodological quality of all currently existing systematic reviews in pediatric oncology. We identified eligible systematic reviews through a systematic search of the literature. Data on clinical and methodological characteristics of the included systematic reviews were extracted. The methodological quality of the included systematic reviews was assessed using the overview quality assessment questionnaire, a validated 10-item quality assessment tool. We compared the methodological quality of systematic reviews published in regular journals with that of Cochrane systematic reviews. We included 117 systematic reviews, 99 systematic reviews published in regular journals and 18 Cochrane systematic reviews. The average methodological quality of systematic reviews was low for all ten items, but the quality of Cochrane systematic reviews was significantly higher than systematic reviews published in regular journals. On a 1-7 scale, the median overall quality score for all systematic reviews was 2 (range 1-7), with a score of 1 (range 1-7) for systematic reviews in regular journals compared to 6 (range 3-7) in Cochrane systematic reviews (p<0.001). Most systematic reviews in the field of pediatric oncology seem to have serious methodological flaws leading to a high risk of bias. While Cochrane systematic reviews were of higher methodological quality than systematic reviews in regular journals, some of them also had methodological problems. Therefore, the methodology of each individual systematic review should be scrutinized before accepting its results.

The logic of syntactic priming and acceptability judgments.

PubMed

Gaston, Phoebe; Huang, Nick; Phillips, Colin

2017-01-01

A critical flaw in Branigan & Pickering's (B&P's) advocacy of structural priming is the absence of a theory of priming. This undermines their claims about the value of priming as a methodology. In contrast, acceptability judgments enable clearer inferences about structure. It is important to engage thoroughly with the logic behind different structural diagnostics.

Methodological Controversies in the Treatment of Panic Disorder.

ERIC Educational Resources Information Center

McNally, Richard J.

1996-01-01

Although the National Institutes of Health Consensus Development Conference on the Treatment of Panic Disorder endorsed the effectiveness of cognitive-behavior therapy (CBT), D. F. Klein argues that fatal flaws in all but one CBT study undermine claims about the effectiveness of CBT for panic disorder. This article critiques Klein's arguments and…

Brief Report: Visual Acuity in Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Albrecht, Matthew A.; Stuart, Geoffrey W.; Falkmer, Marita; Ordqvist, Anna; Leung, Denise; Foster, Jonathan K.; Falkmer, Torbjorn

2014-01-01

Recently, there has been heightened interest in suggestions of enhanced visual acuity in autism spectrum disorders (ASD) which was sparked by evidence that was later accepted to be methodologically flawed. However, a recent study that claimed children with ASD have enhanced visual acuity (Brosnan et al. in "J Autism Dev Disord"…

Is Acculturation in Hispanic Health Research a Flawed Concept? JSRI Working Paper.

ERIC Educational Resources Information Center

Ponce, Carlos; Comer, Brendon

Some health researchers have used the concept of acculturation to explain health behaviors or illnesses prevalent among Hispanic people. This paper reviews studies in health, educational, and social science research among Hispanics and argues that acculturation studies are seriously limited by several basic conceptual and methodological problems.…

Psychopharmacology and Mental Retardation: A 10 Year Review (1990- 1999).

ERIC Educational Resources Information Center

Matson, Johnny L.; Bamburg, Jay W.; Mayville, Erik A.; Pinkston, Jim; Bielecki, Joanne; Kuhn, David; Smalls, Yemonja; Logan, James R.

2000-01-01

Review of the literature on psychopharmacology and mental retardation from 1990-1999 found most studies had major methodological flaws. Also, most drug administrations were not based in science, were not evaluated appropriately, and generally did not follow best practices for treatment of persons with mental retardation. A table lists the studies…

Ojibwa Adult-Child Interactions: A Brief Literature Review.

ERIC Educational Resources Information Center

McShane, D.

1986-01-01

Summarizes findings of many studies of personality characteristics and adult-child interaction patterns among the Ojibwa. Points out that most studies were undertaken by non-Indians, and many studies had serious methodological flaws and/or lacked coherent theory. Calls for research to contribute to theory and improve Ojibwa quality of life. (JHZ)

Cases Not Proven: An Evaluation of Two Studies of Teacher Racism.

ERIC Educational Resources Information Center

Foster, Peter

1990-01-01

Evaluates two British ethnographic studies by Bruce Carrington and Edward Wood, and by Cecile Y. Wright claiming to find evidence of teachers' racist attitudes and behaviors toward Afro-Caribbean students that contributed to student underachievement. Delineates methodological flaws. Argues that Wright's findings that the source of racism is in…

A Novel Approach to Rotorcraft Damage Tolerance

NASA Technical Reports Server (NTRS)

Forth, Scott C.; Everett, Richard A.; Newman, John A.

2002-01-01

Damage-tolerance methodology is positioned to replace safe-life methodologies for designing rotorcraft structures. The argument for implementing a damage-tolerance method comes from the fundamental fact that rotorcraft structures typically fail by fatigue cracking. Therefore, if technology permits prediction of fatigue-crack growth in structures, a damage-tolerance method should deliver the most accurate prediction of component life. Implementing damage-tolerance (DT) into high-cycle-fatigue (HCF) components will require a shift from traditional DT methods that rely on detecting an initial flaw with nondestructive inspection (NDI) methods. The rapid accumulation of cycles in a HCF component will result in a design based on a traditional DT method that is either impractical because of frequent inspections, or because the design will be too heavy to operate efficiently. Furthermore, once a HCF component develops a detectable propagating crack, the remaining fatigue life is short, sometimes less than one flight hour, which does not leave sufficient time for inspection. Therefore, designing a HCF component will require basing the life analysis on an initial flaw that is undetectable with current NDI technology.

Induced abortion and adolescent mental health.

PubMed

Stotland, Nada L

2011-10-01

Induced abortion is widely believed - by the public, healthcare professionals, and policy-makers - to lead to adverse mental health sequelae. This belief is false, as it applies both to adult women and adolescents. However, it has been used to rationalize, and been quoted in, restrictive and intrusive legislation in several states and in proposed federal legislation. It is essential for gynecologists to have accurate information, as clinicians, for their patients, and, as key experts, for policy makers. New articles concluding that there are adverse psychological outcomes from induced abortion continue to be published. The methodological flaws in these articles are so serious as to invalidate those conclusions. Several recent scholarly analyses detail these flaws. Methodologically sound studies and reviews continue to demonstrate that psychosocial problems play a role in unwanted conception and the decision to abort unwanted pregnancies but are not the result of abortion. Clinicians may have to reassure patients making decisions about their pregnancies that abortion does not cause psychiatric illness. They can do so on the basis of recent analyses substantiating that finding. (C) 2011 Lippincott Williams & Wilkins, Inc.

Data and methodological problems in establishing state gasoline-conservation targets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greene, D.L.; Walton, G.H.

The Emergency Energy Conservation Act of 1979 gives the President the authority to set gasoline-conservation targets for states in the event of a supply shortage. This paper examines data and methodological problems associated with setting state gasoline-conservation targets. The target-setting method currently used is examined and found to have some flaws. Ways of correcting these deficiencies through the use of Box-Jenkins time-series analysis are investigated. A successful estimation of Box-Jenkins models for all states included the estimation of the magnitude of the supply shortages of 1979 in each state and a preliminary estimation of state short-run price elasticities, which weremore » found to vary about a median value of -0.16. The time-series models identified were very simple in structure and lent support to the simple consumption growth model assumed by the current target method. The authors conclude that the flaws in the current method can be remedied either by replacing the current procedures with time-series models or by using the models in conjunction with minor modifications of the current method.« less

Improved flaw detection and characterization with difference thermography

NASA Astrophysics Data System (ADS)

Winfree, William P.; Zalameda, Joseph N.; Howell, Patricia A.

2011-05-01

Flaw detection and characterization with thermographic techniques in graphite polymer composites is often limited by localized variations in the thermographic response. Variations in properties such as acceptable porosity, variations in fiber volume content and surface polymer thickness result in variations in the thermal response that in general cause significant variations in the initial thermal response. These variations result in a noise floor that increases the difficulty of detecting and characterizing deeper flaws. The paper investigates comparing thermographic responses taken before and after a change in state in a composite to improve the detection of subsurface flaws. A method is presented for registration of the responses before finding the difference. A significant improvement in the detectability is achieved by comparing the differences in response. Examples of changes in state due to application of a load and impact are presented.

Improved Flaw Detection and Characterization with Difference Thermography

NASA Technical Reports Server (NTRS)

Winfree, William P.; Zalameda, Joseph N.; Howell, Patricia A.

2011-01-01

Flaw detection and characterization with thermographic techniques in graphite polymer composites is often limited by localized variations in the thermographic response. Variations in properties such as acceptable porosity, variations in fiber volume content and surface polymer thickness result in variations in the thermal response that in general cause significant variations in the initial thermal response. These variations result in a noise floor that increases the difficulty of detecting and characterizing deeper flaws. The paper investigates comparing thermographic responses taken before and after a change in state in a composite to improve the detection of subsurface flaws. A method is presented for registration of the responses before finding the difference. A significant improvement in the detectability is achieved by comparing the differences in response. Examples of changes in state due to application of a load and impact are presented.

Detection and localization of damage using empirical mode decomposition and multilevel support vector machine

NASA Astrophysics Data System (ADS)

Dushyanth, N. D.; Suma, M. N.; Latte, Mrityanjaya V.

2016-03-01

Damage in the structure may raise a significant amount of maintenance cost and serious safety problems. Hence detection of the damage at its early stage is of prime importance. The main contribution pursued in this investigation is to propose a generic optimal methodology to improve the accuracy of positioning of the flaw in a structure. This novel approach involves a two-step process. The first step essentially aims at extracting the damage-sensitive features from the received signal, and these extracted features are often termed the damage index or damage indices, serving as an indicator to know whether the damage is present or not. In particular, a multilevel SVM (support vector machine) plays a vital role in the distinction of faulty and healthy structures. Formerly, when a structure is unveiled as a damaged structure, in the subsequent step, the position of the damage is identified using Hilbert-Huang transform. The proposed algorithm has been evaluated in both simulation and experimental tests on a 6061 aluminum plate with dimensions 300 mm × 300 mm × 5 mm which accordingly yield considerable improvement in the accuracy of estimating the position of the flaw.

Fatigue loading and R-curve behavior of a dental glass-ceramic with multiple flaw distributions.

PubMed

Joshi, Gaurav V; Duan, Yuanyuan; Della Bona, Alvaro; Hill, Thomas J; St John, Kenneth; Griggs, Jason A

2013-11-01

To determine the effects of surface finish and mechanical loading on the rising toughness curve (R-curve) behavior of a fluorapatite glass-ceramic (IPS e.max ZirPress) and to determine a statistical model for fitting fatigue lifetime data with multiple flaw distributions. Rectangular beam specimens were fabricated by pressing. Two groups of specimens (n=30) with polished (15 μm) or air abraded surface were tested under rapid monotonic loading in oil. Additional polished specimens were subjected to cyclic loading at 2 Hz (n=44) and 10 Hz (n=36). All fatigue tests were performed using a fully articulated four-point flexure fixture in 37°C water. Fractography was used to determine the critical flaw size and estimate fracture toughness. To prove the presence of R-curve behavior, non-linear regression was used. Forward stepwise regression was performed to determine the effects on fracture toughness of different variables, such as initial flaw type, critical flaw size, critical flaw eccentricity, cycling frequency, peak load, and number of cycles. Fatigue lifetime data were fit to an exclusive flaw model. There was an increase in fracture toughness values with increasing critical flaw size for both loading methods (rapid monotonic loading and fatigue). The values for the fracture toughness ranged from 0.75 to 1.1 MPam(1/2) reaching a plateau at different critical flaw sizes based on loading method. Cyclic loading had a significant effect on the R-curve behavior. The fatigue lifetime distribution was dependent on the flaw distribution, and it fit well to an exclusive flaw model. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Ultrasonic imaging of material flaws exploiting multipath information

NASA Astrophysics Data System (ADS)

Shen, Xizhong; Zhang, Yimin D.; Demirli, Ramazan; Amin, Moeness G.

2011-05-01

In this paper, we consider ultrasonic imaging for the visualization of flaws in a material. Ultrasonic imaging is a powerful nondestructive testing (NDT) tool which assesses material conditions via the detection, localization, and classification of flaws inside a structure. Multipath exploitations provide extended virtual array apertures and, in turn, enhance imaging capability beyond the limitation of traditional multisensor approaches. We utilize reflections of ultrasonic signals which occur when encountering different media and interior discontinuities. The waveforms observed at the physical as well as virtual sensors yield additional measurements corresponding to different aspect angles. Exploitation of multipath information addresses unique issues observed in ultrasonic imaging. (1) Utilization of physical and virtual sensors significantly extends the array aperture for image enhancement. (2) Multipath signals extend the angle of view of the narrow beamwidth of the ultrasound transducers, allowing improved visibility and array design flexibility. (3) Ultrasonic signals experience difficulty in penetrating a flaw, thus the aspect angle of the observation is limited unless access to other sides is available. The significant extension of the aperture makes it possible to yield flaw observation from multiple aspect angles. We show that data fusion of physical and virtual sensor data significantly improves the detection and localization performance. The effectiveness of the proposed multipath exploitation approach is demonstrated through experimental studies.

The problem of the second wind turbine - a note on a common but flawed wind power estimation method

NASA Astrophysics Data System (ADS)

Gans, F.; Miller, L. M.; Kleidon, A.

2010-06-01

Several recent wind power estimates suggest how this renewable resource can meet all of the current and future global energy demand with little impact on the atmosphere. These estimates are calculated using observed wind speeds in combination with specifications of wind turbine size and density to quantify the extractable wind power. Here we show that this common methodology is flawed because it does not account for energy removal by the turbines that is necessary to ensure the conservation of energy. We will first illustrate the common but flawed methodology using parameters from a recent global quantification of wind power in a simple experimental setup. For a small number of turbines at small scales, the conservation of energy hardly results in a difference when compared to the common method. However, when applied at large to global scales, the ability of radiative gradients to generate a finite amount of kinetic energy needs to be taken into account. Using the same experimental setup, we use the simplest method to ensure the conservation of energy to show a non-negligble decrease in wind velocity after the first turbine that will successively result in lower extraction of the downwind turbines. We then show how the conservation of energy inevitably results in substantially lower estimates of wind power at the global scale. Because conservation of energy is fundamental, we conclude that ultimately environmental constraints set the upper limit for wind power availability at the larger scale rather than detailed engineering specifications of the wind turbine design and placement.

Are thoughtful people more utilitarian? CRT as a unique predictor of moral minimalism in the dilemmatic context.

PubMed

Royzman, Edward B; Landy, Justin F; Leeman, Robert F

2015-03-01

Recent theorizing about the cognitive underpinnings of dilemmatic moral judgment has equated slow, deliberative thinking with the utilitarian disposition and fast, automatic thinking with the deontological disposition. However, evidence for the reflective utilitarian hypothesis-the hypothesized link between utilitarian judgment and individual differences in the capacity for rational reflection (gauged here by the Cognitive Reflection Test [CRT; Frederick, 2005]) has been inconsistent and difficult to interpret in light of several design flaws. In two studies aimed at addressing some of the flaws, we found robust evidence for a reflective minimalist hypothesis-high CRT performers' tendency to regard utility-optimizing acts as largely a matter of personal prerogative, permissible both to perform and to leave undone. This relationship between CRT and the "minimalist" orientation remained intact after controlling for age, sex, trait affect, social desirability, and educational attainment. No significant association was found between CRT and the strict utilitarian response pattern or CRT and the strict deontological response pattern, nor did we find any significant association between CRT and willingness to act in the utility-optimizing manner. However, we found an inverse association between empathic concern and a willingness to act in the utility-optimizing manner, but there was no comparable association between empathic concern and the deontological judgment pattern. Theoretical, methodological, and normative implications of the findings are discussed. Copyright © 2014 Cognitive Science Society, Inc.

Changes in clinical trials methodology over time: a systematic review of six decades of research in psychopharmacology.

PubMed

Brunoni, André R; Tadini, Laura; Fregni, Felipe

2010-03-03

There have been many changes in clinical trials methodology since the introduction of lithium and the beginning of the modern era of psychopharmacology in 1949. The nature and importance of these changes have not been fully addressed to date. As methodological flaws in trials can lead to false-negative or false-positive results, the objective of our study was to evaluate the impact of methodological changes in psychopharmacology clinical research over the past 60 years. We performed a systematic review from 1949 to 2009 on MEDLINE and Web of Science electronic databases, and a hand search of high impact journals on studies of seven major drugs (chlorpromazine, clozapine, risperidone, lithium, fluoxetine and lamotrigine). All controlled studies published 100 months after the first trial were included. Ninety-one studies met our inclusion criteria. We analyzed the major changes in abstract reporting, study design, participants' assessment and enrollment, methodology and statistical analysis. Our results showed that the methodology of psychiatric clinical trials changed substantially, with quality gains in abstract reporting, results reporting, and statistical methodology. Recent trials use more informed consent, periods of washout, intention-to-treat approach and parametric tests. Placebo use remains high and unchanged over time. Clinical trial quality of psychopharmacological studies has changed significantly in most of the aspects we analyzed. There was significant improvement in quality reporting and internal validity. These changes have increased study efficiency; however, there is room for improvement in some aspects such as rating scales, diagnostic criteria and better trial reporting. Therefore, despite the advancements observed, there are still several areas that can be improved in psychopharmacology clinical trials.

Heterodoxy, iconoclasm and spuriousness: the limits of novel expert evidence.

PubMed

Freckelton, Ian

2007-12-01

A difficult issue arises for courts' decision-making at common law and under statutory evidentiary regimes when expert opinions are significantly unorthodox, iconoclastic or methodologically flawed. This editorial analyses the relevant evidentiary principles and the Australian jurisprudence on the subject, giving particular attention to the decisions of the South Australian Supreme Court in R v Parenzee [2007] SASC 143 and R v Parenzee [2007] SASC 316 in which expert opinions about the existence, identifiability and transmissibility of HIV and its relationship to AIDS adduced on behalf of the defence in a criminal trial were found to be seriously wanting. A variety of factors indicative of low probative value in expert opinions are distilled.

The Overuse of Self-Report in the Study of Beliefs in Education: Epistemological Considerations

ERIC Educational Resources Information Center

Gaete, Alfredo; Gómez, Viviana; Benavides, Pelayo

2018-01-01

The last few decades abound in studies concerned with what teachers, students, parents, and other participants in the educational process believe about a wide variety of issues. Most of these studies follow methodological procedures based on reports that people make about their own beliefs. We argue that this strategy is seriously flawed under…

Engaging Students in Survey Design and Data Collection

ERIC Educational Resources Information Center

Sole, Marla A.

2015-01-01

Every day, people use data to make decisions that affect their personal and professional lives, trusting that the data are correct. Many times, however, the data are inaccurate, as a result of a flaw in the design or methodology of the survey used to collect the data. Researchers agree that only questions that are clearly worded, unambiguous, free…

Preliminary Empirical Model of Crucial Determinants of Best Practice for Peer Tutoring on Academic Achievement

ERIC Educational Resources Information Center

Leung, Kim Chau

2015-01-01

Previous meta-analyses of the effects of peer tutoring on academic achievement have been plagued with theoretical and methodological flaws. Specifically, these studies have not adopted both fixed and mixed effects models for analyzing the effect size; they have not evaluated the moderating effect of some commonly used parameters, such as comparing…

Brief Report: Assessment of Sensory Abnormalities in People with Autistic Spectrum Disorders

ERIC Educational Resources Information Center

Harrison, James; Hare, Dougal Julian

2004-01-01

Sensory functioning has long been considered crucial in the life of people with autistic spectrum disorders (ASD) (Gillberg, C., & Coleman, M. (1992). "The Biology of Autistic Syndromes" (2nd ed.). London: Mac Keith press.) However, much of the research is methodologically flawed and based on child populations and adults' retrospective accounts (O…

Investigating and Stimulating Primary Teachers' Attitudes Towards Science: Summary of a Large-Scale Research Project

ERIC Educational Resources Information Center

Walma van der Molen, Juliette; van Aalderen-Smeets, Sandra

2013-01-01

Attention to the attitudes of primary teachers towards science is of fundamental importance to research on primary science education. The current article describes a large-scale research project that aims to overcome three main shortcomings in attitude research, i.e. lack of a strong theoretical concept of attitude, methodological flaws in…

Emotional Interactions in European American Mother-Infant Firstborn and Secondborn Dyads: A Within-Family Study

ERIC Educational Resources Information Center

Bornstein, Marc H.; Putnick, Diane L.; Suwalsky, Joan T. D.

2016-01-01

The developmental science literature is riven with respect to (a) parental similar versus different treatment of siblings and (b) sibling similarities and differences. Most methodologies in the field are flawed or confounded. To address these issues, this study employed a within-family longitudinal design to examine developmental processes of…

Effects of an Evidence-Based Text on Scepticism, Methodological Reasoning, Values and Juror Decision-Making

ERIC Educational Resources Information Center

Leshowitz, Barry; Okun, Morris

2011-01-01

Research in social cognition laboratories and in simulated legal settings demonstrates that people often do not understand the statistical properties of evidence and are unable to detect scientifically flawed studies. In a mock jury study, we examined the effects of an evidence-based transcript on scepticism towards evidence obtained in flawed…

Psychological Autopsy Studies as Diagnostic Tools: Are They Methodologically Flawed?

ERIC Educational Resources Information Center

Hjelmeland, Heidi; Dieserud, Gudrun; Dyregrov, Kari; Knizek, Birthe L.; Leenaars, Antoon A.

2012-01-01

One of the most established "truths" in suicidology is that almost all (90% or more) of those who kill themselves suffer from one or more mental disorders, and a causal link between the two is implied. Psychological autopsy (PA) studies constitute one main evidence base for this conclusion. However, there has been little reflection on the…

Academic Expectations, Attributed Responsibility, and Teachers' Reinforcement Behavior: A Comment on Cooper and Baron, with Some Additional Data.

ERIC Educational Resources Information Center

Meyer, Wulf-Uwe

1979-01-01

Cooper and Baron's conclusions (EJ 174 719) that teachers' performance expectations were more potent predictors of their reinforcement behavior in class than were their attributions of responsibility is criticized on the basis of methodological flaws in the study. Evidence associations between teachers' attributions of responsibility and their…

The Scientific Stature of Counseling Psychology Training Programs: A Still Picture of a Shifting Scene.

ERIC Educational Resources Information Center

Hanish, Christine; And Others

1995-01-01

Previous attempts to rank doctoral programs in counseling psychology suffered from methodological flaws, such as the "Matthew effect." To offset such defects, this study examines citations in two data bases for 488 counseling psychology faculty. The authors list leading programs on the basis of 11 adjusted and unadjusted measures of scientific…

Critical Thinking about Research: Psychology and Related Fields. Second Edition

ERIC Educational Resources Information Center

Meltzoff, Julian; Cooper, Harris

2017-01-01

Could the research you read be fundamentally flawed? Could critical defects in methodology slip by you undetected? To become informed consumers of research, students need to thoughtfully evaluate the research they read rather than accept it without question. This second edition of a classic text gives students the tools they need to apply critical…

Reverse Engineering and Security Evaluation of Commercial Tags for RFID-Based IoT Applications.

PubMed

Fernández-Caramés, Tiago M; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Castedo, Luis

2016-12-24

The Internet of Things (IoT) is a distributed system of physical objects that requires the seamless integration of hardware (e.g., sensors, actuators, electronics) and network communications in order to collect and exchange data. IoT smart objects need to be somehow identified to determine the origin of the data and to automatically detect the elements around us. One of the best positioned technologies to perform identification is RFID (Radio Frequency Identification), which in the last years has gained a lot of popularity in applications like access control, payment cards or logistics. Despite its popularity, RFID security has not been properly handled in numerous applications. To foster security in such applications, this article includes three main contributions. First, in order to establish the basics, a detailed review of the most common flaws found in RFID-based IoT systems is provided, including the latest attacks described in the literature. Second, a novel methodology that eases the detection and mitigation of such flaws is presented. Third, the latest RFID security tools are analyzed and the methodology proposed is applied through one of them (Proxmark 3) to validate it. Thus, the methodology is tested in different scenarios where tags are commonly used for identification. In such systems it was possible to clone transponders, extract information, and even emulate both tags and readers. Therefore, it is shown that the methodology proposed is useful for auditing security and reverse engineering RFID communications in IoT applications. It must be noted that, although this paper is aimed at fostering RFID communications security in IoT applications, the methodology can be applied to any RFID communications protocol.

Reverse Engineering and Security Evaluation of Commercial Tags for RFID-Based IoT Applications

PubMed Central

Fernández-Caramés, Tiago M.; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Castedo, Luis

2016-01-01

The Internet of Things (IoT) is a distributed system of physical objects that requires the seamless integration of hardware (e.g., sensors, actuators, electronics) and network communications in order to collect and exchange data. IoT smart objects need to be somehow identified to determine the origin of the data and to automatically detect the elements around us. One of the best positioned technologies to perform identification is RFID (Radio Frequency Identification), which in the last years has gained a lot of popularity in applications like access control, payment cards or logistics. Despite its popularity, RFID security has not been properly handled in numerous applications. To foster security in such applications, this article includes three main contributions. First, in order to establish the basics, a detailed review of the most common flaws found in RFID-based IoT systems is provided, including the latest attacks described in the literature. Second, a novel methodology that eases the detection and mitigation of such flaws is presented. Third, the latest RFID security tools are analyzed and the methodology proposed is applied through one of them (Proxmark 3) to validate it. Thus, the methodology is tested in different scenarios where tags are commonly used for identification. In such systems it was possible to clone transponders, extract information, and even emulate both tags and readers. Therefore, it is shown that the methodology proposed is useful for auditing security and reverse engineering RFID communications in IoT applications. It must be noted that, although this paper is aimed at fostering RFID communications security in IoT applications, the methodology can be applied to any RFID communications protocol. PMID:28029119

Ageing airplane repair assessment program for Airbus A300

NASA Technical Reports Server (NTRS)

Gaillardon, J. M.; Schmidt, HANS-J.; Brandecker, B.

1992-01-01

This paper describes the current status of the repair categorization activities and includes all details about the methodologies developed for determination of the inspection program for the skin on pressurized fuselages. For inspection threshold determination two methods are defined based on fatigue life approach, a simplified and detailed method. The detailed method considers 15 different parameters to assess the influences of material, geometry, size location, aircraft usage, and workmanship on the fatigue life of the repair and the original structure. For definition of the inspection intervals a general method is developed which applies to all concerned repairs. For this the initial flaw concept is used by considering 6 parameters and the detectable flaw sizes depending on proposed nondestructive inspection methods. An alternative method is provided for small repairs allowing visual inspection with shorter intervals.

Reliability Analysis of Uniaxially Ground Brittle Materials

NASA Technical Reports Server (NTRS)

Salem, Jonathan A.; Nemeth, Noel N.; Powers, Lynn M.; Choi, Sung R.

1995-01-01

The fast fracture strength distribution of uniaxially ground, alpha silicon carbide was investigated as a function of grinding angle relative to the principal stress direction in flexure. Both as-ground and ground/annealed surfaces were investigated. The resulting flexural strength distributions were used to verify reliability models and predict the strength distribution of larger plate specimens tested in biaxial flexure. Complete fractography was done on the specimens. Failures occurred from agglomerates, machining cracks, or hybrid flaws that consisted of a machining crack located at a processing agglomerate. Annealing eliminated failures due to machining damage. Reliability analyses were performed using two and three parameter Weibull and Batdorf methodologies. The Weibull size effect was demonstrated for machining flaws. Mixed mode reliability models reasonably predicted the strength distributions of uniaxial flexure and biaxial plate specimens.

Systematic reviews and meta-analyses on treatment of asthma: critical evaluation

PubMed Central

Jadad, Alejandro R; Moher, Michael; Browman, George P; Booker, Lynda; Sigouin, Christopher; Fuentes, Mario; Stevens, Robert

2000-01-01

Objective To evaluate the clinical, methodological, and reporting aspects of systematic reviews and meta-analyses on the treatment of asthma and to compare those published by the Cochrane Collaboration with those published in paper based journals. Design Analysis of studies identified from Medline, CINAHL, HealthSTAR, EMBASE, Cochrane Library, personal collections, and reference lists. Studies Articles describing a systematic review or a meta-analysis of the treatment of asthma that were published as a full report, in any language or format, in a peer reviewed journal or the Cochrane Library. Main outcome measures General characteristics of studies reviewed and methodological characteristics (sources of articles; language restrictions; format, design, and publication status of studies included; type of data synthesis; and methodological quality). Results 50 systematic reviews and meta-analyses were included. More than half were published in the past two years. Twelve reviews were published in the Cochrane Library and 38 were published in 22 peer reviewed journals. Forced expiratory volume in one second was the most frequently used outcome, but few reviews evaluated the effect of treatment on costs or patient preferences. Forty reviews were judged to have serious or extensive flaws. All six reviews associated with industry were in this group. Seven of the 10 most rigorous reviews were published in the Cochrane Library. Conclusions Most reviews published in peer reviewed journals or funded by industry have serious methodological flaws that limit their value to guide decisions. Cochrane reviews are more rigorous and better reported than those published in peer reviewed journals. PMID:10688558

Methodological Flaws, Conflicts of Interest, and Scientific Fallacies: Implications for the Evaluation of Antidepressants' Efficacy and Harm.

PubMed

Hengartner, Michael P

2017-01-01

In current psychiatric practice, antidepressants are widely and with ever-increasing frequency prescribed to patients. However, several scientific biases obfuscate estimates of antidepressants' efficacy and harm, and these are barely recognized in treatment guidelines. The aim of this mini-review is to critically evaluate the efficacy and harm of antidepressants for acute and maintenance treatment with respect to systematic biases related to industry funding and trial methodology. Narrative review based on a comprehensive search of the literature. It is shown that the pooled efficacy of antidepressants is weak and below the threshold of a minimally clinically important change once publication and reporting biases are considered. Moreover, the small mean difference in symptom reductions relative to placebo is possibly attributable to observer effects in unblinded assessors and patient expectancies. With respect to trial dropout rates, a hard outcome not subjected to observer bias, no difference was observed between antidepressants and placebo. The discontinuation trials on the efficacy of antidepressants in maintenance therapy are systematically flawed, because in these studies, spontaneous remitters are excluded, whereas half of all patients who remitted on antidepressants are abruptly switched to placebo. This can cause a severe withdrawal syndrome that is easily misdiagnosed as a relapse when assessed on subjective symptom rating scales. In accordance, the findings of naturalistic long-term studies suggest that maintenance therapy has no clear benefit, and non-drug users do not show increased recurrence rates. Moreover, a growing body of evidence from hundreds of randomized controlled trials suggests that antidepressants cause suicidality, but this risk is underestimated because data from industry-funded trials are systematically flawed. Unselected, population-wide observational studies indicate that depressive patients who use antidepressants are at an increased risk of suicide and that they have a higher rate of all-cause mortality than matched controls. The strong reliance on industry-funded research results in an uncritical approval of antidepressants. Due to several flaws such as publication and reporting bias, unblinding of outcome assessors, concealment and recoding of serious adverse events, the efficacy of antidepressants is systematically overestimated, and harm is systematically underestimated. Therefore, I conclude that antidepressants are largely ineffective and potentially harmful.

Does Educator Training or Experience Affect the Quality of Multiple-Choice Questions?

PubMed

Webb, Emily M; Phuong, Jonathan S; Naeger, David M

2015-10-01

Physicians receive little training on proper multiple-choice question (MCQ) writing methods. Well-constructed MCQs follow rules, which ensure that a question tests what it is intended to test. Questions that break these are described as "flawed." We examined whether the prevalence of flawed questions differed significantly between those with or without prior training in question writing and between those with different levels of educator experience. We assessed 200 unedited MCQs from a question bank for our senior medical student radiology elective: an equal number of questions (50) were written by faculty with previous training in MCQ writing, other faculty, residents, and medical students. Questions were scored independently by two readers for the presence of 11 distinct flaws described in the literature. Questions written by faculty with MCQ writing training had significantly fewer errors: mean 0.4 errors per question compared to a mean of 1.5-1.7 errors per question for the other groups (P < .001). There were no significant differences in the total number of errors between the untrained faculty, residents, and students (P values .35-.91). Among trained faculty 17/50 questions (34%) were flawed, whereas other faculty wrote 38/50 (76%) flawed questions, residents 37/50 (74%), and students 44/50 (88%). Trained question writers' higher performance was mainly manifest in the reduced frequency of five specific errors. Faculty with training in effective MCQ writing made fewer errors in MCQ construction. Educator experience alone had no effect on the frequency of flaws; faculty without dedicated training, residents, and students performed similarly. Copyright © 2015 AUR. Published by Elsevier Inc. All rights reserved.

75 FR 9623 - Arizona Public Service Company, et al.; Palo Verde Nuclear Generating Station, Units 1, 2, and 3...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-03

... pressurized-water reactors located in Maricopa County, Arizona. 2.0 Request/Action Title 10 of the Code of... in CE NPSD-683-A, Revision 6, for the calculation of flaw stress intensity factors due to membrane stress from pressure loading (K IM ), an exemption was required, since the methodology for the...

Perfect Mirror Design Technology

DTIC Science & Technology

1999-02-01

with Prof. Mario Molina, recipient of the 1995 Nobel Prize in Chemistry. The partnership, along with Aerodyne Research Inc., looked at how sulfur...Corporation is developing standards for nondestructive evaluation ( NDE ) techniques for industry use. Use of the new standards will result in improved...novel testing methodology that dramatically improves the accuracy of NDE techniques used to detect flaws. Basic Research Five years ago, the main

One Size Doesn't Fit All: Reopening Discussion of the Research-Practice Connection

ERIC Educational Resources Information Center

Schoonmaker, Frances

2007-01-01

Research in the early part of the 20th century focused on finding scientific proofs for justification of practice and drew on educational psychology for its methods. Critics charged the quantitative, experimental paradigm with being seriously flawed. By the end of the 20th century, a new paradigm emerged as a variety of methodologies drawn from…

A Critical Meta-Analysis of All Evaluations of State-Funded Preschool from 1977 to 1998: Implications for Policy, Service Delivery and Program Evaluation.

ERIC Educational Resources Information Center

Gilliam, Walter S.; Zigler, Edward F.

2000-01-01

Presents a meta-analytic review of evaluations of state-funded preschool programs over 20 years. Identifies several methodological flaws but also suggests that pattern of findings offers modest support for positive impact in improving children's developmental competence, improving later school attendance and performance, and reducing subsequent…

Remarques critiques a propos de l'enquete international sur la litteratie (Critical Remarks Regarding the International Adult Literacy Survey).

ERIC Educational Resources Information Center

Manesse, Daniele

2000-01-01

States that French authorities refused to make International Adult Literacy Survey results public, citing methodological flaws, the need for better procedural precautions, and a more adequate notion of literacy. Presents a synthesis of the counter investigations demanded by French authorities that justify their doubts on the IALS definitions and…

Synthesis Guidebook. Volume 1. Methodology Definition

DTIC Science & Technology

1992-10-16

OV I. Introductiaa " Synthesis Transition Strategies (Williams 1990b), which discusses a strategy for the incremental transitioning of Synthesis into... strategies for mitigating those risks. Use checkpoints, reviews, and metrics to reveal flaws and misconceptions. 4. Interaction With Other Activities... markets and customer requirements lead to evolving product and process needs of Application Engineering projects. OV2-5 OV.2. Fundamentals of Synthesis

Acupuncture in the treatment of tinnitus: a systematic review and meta-analysis.

PubMed

Liu, Fenye; Han, Xiuli; Li, Yunfeng; Yu, Shudong

2016-02-01

This study aimed at a systematic review and meta-analysis of all available randomized controlled trials (RCTs) using acupuncture to treat tinnitus. Five electronic databases, in both English and Chinese, were searched. All studies in our review and meta-analysis included parallel RCTs of tinnitus patients which compared subjects receiving acupuncture (or its other forms, such as electroacupuncture) to subjects receiving no treatment, sham treatment, drugs or basic medical therapy. Data from the articles were validated and extracted using a predefined data extraction form. Nearly all of Chinese studies reported positive results, while most of English studies reported negative results. Analysis of the combined data found that the acupuncture treatments seemed to provide some advantages over conventional therapies for tinnitus. It had difference in acupuncture points and sessions between Chinese studies and English studies. Methodological flaws were also found in many of the RCTs, especially in Chinese studies. The results of this review suggest that acupuncture therapy may offer subjective benefit to some tinnitus patients. Acupuncture points and sessions used in Chinese studies may be more appropriate, whereas these studies have many methodological flaws and risk bias, which prevents us making a definitive conclusion.

Is aggression in children with behavioural and emotional difficulties associated with television viewing and video game playing? A systematic review.

PubMed

Mitrofan, O; Paul, M; Spencer, N

2009-01-01

Possible associations between television viewing and video game playing and children's aggression have become public health concerns. We did a systematic review of studies that examined such associations, focussing on children and young people with behavioural and emotional difficulties, who are thought to be more susceptible. We did computer-assisted searches of health and social science databases, gateways, publications from relevant organizations and for grey literature; scanned bibliographies; hand-searched key journals; and corresponded with authors. We critically appraised all studies. A total of 12 studies: three experiments with children with behavioural and emotional difficulties found increased aggression after watching aggressive as opposed to low-aggressive content television programmes, one found the opposite and two no clear effect, one found such children no more likely than controls to imitate aggressive television characters. One case-control study and one survey found that children and young people with behavioural and emotional difficulties watched more television than controls; another did not. Two studies found that children and young people with behavioural and emotional difficulties viewed more hours of aggressive television programmes than controls. One study on video game use found that young people with behavioural and emotional difficulties viewed more minutes of violence and played longer than controls. In a qualitative study children with behavioural and emotional difficulties, but not their parents, did not associate watching television with aggression. All studies had significant methodological flaws. None was based on power calculations. This systematic review found insufficient, contradictory and methodologically flawed evidence on the association between television viewing and video game playing and aggression in children and young people with behavioural and emotional difficulties. If public health advice is to be evidence-based, good quality research is needed.

Effectiveness and safety of acupuncture in the treatment of Parkinson's disease: A systematic review and meta-analysis of randomized controlled trials.

PubMed

Noh, Hyeonseok; Kwon, Seungwon; Cho, Seung-Yeon; Jung, Woo-Sang; Moon, Sang-Kwan; Park, Jung-Mi; Ko, Chang-Nam; Park, Seong-Uk

2017-10-01

This study aimed to examine the effectiveness and safety of acupuncture in the treatment of Parkinson's disease (PD). English, Chinese, and Korean electronic databases were searched up to June 2016. Randomized controlled trials (RCTs) were eligible. The methodological quality was assessed using Cochrane's risk of bias tool. Meta-analysis was performed using RevMan 5.3. In total, 42 studies involving 2625 participants were systematically reviewed. Participants treated using combined acupuncture and conventional medication (CM) showed significant improvements in total Unified PD Rating Scale (UPDRS), UPDRS I, UPDRS II, UPDRS III, and the Webster scale compared to those treated using CM alone. The combination of electroacupuncture and CM was significantly superior to CM alone in total UPDRS, UPDRS I, UPDRS II, and UPDRS IV. Similarly, the combination of scalp electroacupuncture, acupuncture, and CM was significantly more effective than CM alone in total UPDRS. However, our meta-analysis showed that the combination of electroacupuncture and CM was not significantly more effective than CM alone in UPDRS III, the Webster, and the Tension Assessment Scale. The results also failed to show that acupuncture was significantly more effective than placebo acupuncture in total UPDRS. Overall, the methodological quality of the RCTs was low. No serious adverse events were reported. We found that acupuncture might be a safe and useful adjunctive treatment for patients with PD. However, because of methodological flaws in the included studies, conclusive evidence is still lacking. More rigorous and well-designed placebo-controlled trials should be conducted. Copyright © 2017 Elsevier Ltd. All rights reserved.

Hospital inpatient self-administration of medicine programmes: a critical literature review.

PubMed

Wright, Julia; Emerson, Angela; Stephens, Martin; Lennan, Elaine

2006-06-01

The Department of Health, pharmaceutical and nursing bodies have advocated the benefits of self-administration programmes (SAPs), but their implementation within UK hospitals has been limited. Perceived barriers are: anticipated increased workload, insufficient resources and patient safety concerns. This review aims to discover if benefits of SAPs are supported in the literature in relation to risk and resource implications. Electronic databases were searched up to March 2004. Published English language articles that described and evaluated implementation of an SAP were included. Outcomes reported were: compliance measures, errors, knowledge, patient satisfaction, and nursing and pharmacy time. Most of the 51 papers reviewed had methodological flaws. SAPs varied widely in content and structure. Twelve studies (10 controlled) measured compliance by tablet counts. Of 7 studies subjected to statistical analysis, four demonstrated a significant difference in compliance between SAP and controls. Eight studies (5 controlled) measured errors as an outcome. Of the two evaluated statistically, only one demonstrated significantly fewer medication errors in the SAP group than in controls. Seventeen papers (11 controlled) studied the effect of SAPs on patients' medication knowledge. Ten of the 11 statistically analysed studies showed that SAP participants knew significantly more about some aspects of their medication than did controls. Seventeen studies (5 controlled), measured patient satisfaction. Two studies were statistically analysed and these studies suggested that patients were satisfied and preferred SAP. Seven papers studied pharmacy time, three studied nursing time but results were not compared to controls. The paucity of well-designed studies, flawed methodology and inadequate reporting in many papers make conclusions hard to draw. Conclusive evidence that SAPs improve compliance was not provided. Although patients participating in SAPs make errors, small numbers of patients are often responsible for a large number of errors. Whilst most studies suggest that SAPs increase patient's knowledge in part, it is difficult to separate out the effect of the educational component of many SAPs. Most patients who participated in SAPs were satisfied with their care and many would choose to take part in a SAP in the future. No studies measured the total resource requirement of implementing and maintaining a SAP.

Characterization of Acoustic Emission Parameters During Testing of Metal Liner Reinforced with Fully Resin Impregnated CNG Cylinder

NASA Astrophysics Data System (ADS)

Kenok, R.; Jomdecha, C.; Jirarungsatian, C.

The aim of this paper is to study the acoustic emission (AE) parameters obtained from CNG cylinders during pressurization. AE from flaw propagation, material integrity, and pressuring of cylinder was the main objective for characterization. CNG cylinders of ISO 11439, resin fully wrapped type and metal liner type, were employed to test by hydrostatic stressing. The pressure was step increased until 1.1 time of operating pressure. Two AE sensors, resonance frequency of 150 kHz, were mounted on the cylinder wall to detect the AE throughout the testing. From the experiment results, AE can be detected from pressuring rate, material integrity, and flaw propagation from the cylinder wall. AE parameters including Amplitude, Count, Energy (MARSE), Duration and Rise time were analyzed to distinguish the AE data. The results show that the AE of flaw propagation was different in character from that of pressurization. Especially, AE detected from flaws of resin wrapped and metal liner was significantly different. To locate the flaw position, both the AE sensors can be accurately used to locate the flaw propagation in a linear pattern. The error was less than ±5 cm.

Violent Video Games and the Supreme Court: Lessons for the Scientific Community in the Wake of Brown v. Entertainment Merchants Association

ERIC Educational Resources Information Center

Ferguson, Christopher J.

2013-01-01

In June 2011 the U.S. Supreme Court ruled that video games enjoy full free speech protections and that the regulation of violent game sales to minors is unconstitutional. The Supreme Court also referred to psychological research on violent video games as "unpersuasive" and noted that such research contains many methodological flaws.…

A robust indicator based on singular value decomposition for flaw feature detection from noisy ultrasonic signals

NASA Astrophysics Data System (ADS)

Cui, Ximing; Wang, Zhe; Kang, Yihua; Pu, Haiming; Deng, Zhiyang

2018-05-01

Singular value decomposition (SVD) has been proven to be an effective de-noising tool for flaw echo signal feature detection in ultrasonic non-destructive evaluation (NDE). However, the uncertainty in the arbitrary manner of the selection of an effective singular value weakens the robustness of this technique. Improper selection of effective singular values will lead to bad performance of SVD de-noising. What is more, the computational complexity of SVD is too large for it to be applied in real-time applications. In this paper, to eliminate the uncertainty in SVD de-noising, a novel flaw indicator, named the maximum singular value indicator (MSI), based on short-time SVD (STSVD), is proposed for flaw feature detection from a measured signal in ultrasonic NDE. In this technique, the measured signal is first truncated into overlapping short-time data segments to put feature information of a transient flaw echo signal in local field, and then the MSI can be obtained from the SVD of each short-time data segment. Research shows that this indicator can clearly indicate the location of ultrasonic flaw signals, and the computational complexity of this STSVD-based indicator is significantly reduced with the algorithm proposed in this paper. Both simulation and experiments show that this technique is very efficient for real-time application in flaw detection from noisy data.

Alteration of histological gastritis after cure of Helicobacter pylori infection.

PubMed

Hojo, M; Miwa, H; Ohkusa, T; Ohkura, R; Kurosawa, A; Sato, N

2002-11-01

It is still disputed whether gastric atrophy or intestinal metaplasia improves after the cure of Helicobacter pylori infection. To clarify the histological changes after the cure of H. pylori infection through a literature survey. Fifty-one selected reports from 1066 relevant articles were reviewed. The extracted data were pooled according to histological parameters of gastritis based on the (updated) Sydney system. Activity improved more rapidly than inflammation. Eleven of 25 reports described significant improvement of atrophy. Atrophy was not improved in one of four studies with a large sample size (> 100 samples) and in two of five studies with a long follow-up period (> 12 months), suggesting that disagreement between the studies was not totally due to sample size or follow-up period. Methodological flaws, such as patient selection, and statistical analysis based on the assumption that atrophy improves continuously and generally in all patients might be responsible for the inconsistent results. Four of 28 studies described significant improvement of intestinal metaplasia [corrected]. Activity and inflammation were improved after the cure of H. pylori infection. Atrophy did not improve generally among all patients, but improved in certain patients. Improvement of intestinal metaplasia was difficult to analyse due to methodological problems including statistical power.

A FRAMEWORK TO DEVELOP FLAW ACCEPTANCE CRITERIA FOR STRUCTURAL INTEGRITY ASSESSMENT OF MULTIPURPOSE CANISTERS FOR EXTENDED STORAGE OF USED NUCLEAR FUEL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lam, P.; Sindelar, R.; Duncan, A.

2014-04-07

A multipurpose canister (MPC) made of austenitic stainless steel is loaded with used nuclear fuel assemblies and is part of the transfer cask system to move the fuel from the spent fuel pool to prepare for storage, and is part of the storage cask system for on-site dry storage. This weld-sealed canister is also expected to be part of the transportation package following storage. The canister may be subject to service-induced degradation especially if exposed to aggressive environments during possible very long-term storage period if the permanent repository is yet to be identified and readied. Stress corrosion cracking may bemore » initiated on the canister surface in the welds or in the heat affected zone because the construction of MPC does not require heat treatment for stress relief. An acceptance criteria methodology is being developed for flaw disposition should the crack-like defects be detected by periodic Inservice Inspection. The external loading cases include thermal accident scenarios and cask drop conditions with the contribution from the welding residual stresses. The determination of acceptable flaw size is based on the procedure to evaluate flaw stability provided by American Petroleum Institute (API) 579 Fitness-for-Service (Second Edition). The material mechanical and fracture properties for base and weld metals and the stress analysis results are obtained from the open literature such as NUREG-1864. Subcritical crack growth from stress corrosion cracking (SCC), and its impact on inspection intervals and acceptance criteria, is not addressed.« less

Acceptance rate and reasons for rejection of manuscripts submitted to Veterinary Radiology & Ultrasound during 2012.

PubMed

Lamb, Christopher R; Mai, Wilfried

2015-01-01

Better understanding of the reasons why manuscripts are rejected, and recognition of the most frequent manuscript flaws identified by reviewers, should help submitting authors to avoid these pitfalls. Of 219 manuscripts submitted to Veterinary Radiology & Ultrasound in 2012, none (0%) was accepted without revision, four (2%) were withdrawn by the authors, 99 (45%) were accepted after revision, and 116 (53%) were rejected. All manuscripts for which minor revision was requested, and 73/86 (85%) manuscripts for which major revision was requested, were ultimately accepted. Acceptance rate was greater for retrospective studies and for manuscripts submitted from countries in which English was the primary language. The prevalences of flaws in manuscripts were poor writing (62%), deficiencies in data (60%), logical or methodological errors (28%), content not suitable for Veterinary Radiology & Ultrasound (26%), and lack of new or useful knowledge (25%). Likelihood of manuscript rejection was greater for lack of new or useful knowledge and content not suitable than for other manuscript flaws. The lower acceptance rate for manuscripts from countries in which English was not the primary language was associated with content not suitable and not poor writing. Submitting authors are encouraged to do more to recognize and address manuscript flaws before submission, for example by internal review. Specifically, submitting authors should express clearly the potential added value of their study in the introduction section of their manuscript, describe completely their methods and results, and consult the Editor-in-Chief if they are uncertain whether their subject matter would be suitable for the journal. © 2014 American College of Veterinary Radiology.

Rousseau on Sex-Roles, Education and Happiness

ERIC Educational Resources Information Center

Jonas, Mark E.

2016-01-01

Over the last decade, philosophers of education have begun taking a renewed interest in Rousseau's educational thought. This is a welcome development as his ideas are rich with educational insights. His philosophy is not without its flaws, however. One significant flaw is his educational project for females, which is sexist in the highest degree.…

The Fundamental Flaws of Immunoassays and Potential Solutions Using Tandem Mass Spectrometry

PubMed Central

Hoofnagle, Andrew N.; Wener, Mark H.

2009-01-01

Immunoassays have made it possible to measure dozens of individual proteins and other analytes in human samples for help in establishing the diagnosis and prognosis of disease. In too many cases the results of those measurements are misleading and can lead to unnecessary treatment or missed opportunities for therapeutic interventions. These cases stem from problems inherent to immunoassays performed with human samples, which include a lack of concordance across platforms, autoantibodies, anti-reagent antibodies, and the high-dose hook effect. Tandem mass spectrometry may represent a detection method capable of alleviating many of the flaws inherent to immunoassays. We review our understanding of the problems associated with immunoassays on human specimens and describe methodologies using tandem mass spectrometry that could solve some of those problems. We also provide a critical discussion of the potential pitfalls of novel mass spectrometric approaches in the clinical laboratory. PMID:19538965

Vision-based in-line fabric defect detection using yarn-specific shape features

NASA Astrophysics Data System (ADS)

Schneider, Dorian; Aach, Til

2012-01-01

We develop a methodology for automatic in-line flaw detection in industrial woven fabrics. Where state of the art detection algorithms apply texture analysis methods to operate on low-resolved ({200 ppi) image data, we describe here a process flow to segment single yarns in high-resolved ({1000 ppi) textile images. Four yarn shape features are extracted, allowing a precise detection and measurement of defects. The degree of precision reached allows a classification of detected defects according to their nature, providing an innovation in the field of automatic fabric flaw detection. The design has been carried out to meet real time requirements and face adverse conditions caused by loom vibrations and dirt. The entire process flow is discussed followed by an evaluation using a database with real-life industrial fabric images. This work pertains to the construction of an on-loom defect detection system to be used in manufacturing practice.

Alpha-Helical Protein Networks Are Self-Protective and Flaw-Tolerant

PubMed Central

Ackbarow, Theodor; Sen, Dipanjan; Thaulow, Christian; Buehler, Markus J.

2009-01-01

Alpha-helix based protein networks as they appear in intermediate filaments in the cell’s cytoskeleton and the nuclear membrane robustly withstand large deformation of up to several hundred percent strain, despite the presence of structural imperfections or flaws. This performance is not achieved by most synthetic materials, which typically fail at much smaller deformation and show a great sensitivity to the existence of structural flaws. Here we report a series of molecular dynamics simulations with a simple coarse-grained multi-scale model of alpha-helical protein domains, explaining the structural and mechanistic basis for this observed behavior. We find that the characteristic properties of alpha-helix based protein networks are due to the particular nanomechanical properties of their protein constituents, enabling the formation of large dissipative yield regions around structural flaws, effectively protecting the protein network against catastrophic failure. We show that the key for these self protecting properties is a geometric transformation of the crack shape that significantly reduces the stress concentration at corners. Specifically, our analysis demonstrates that the failure strain of alpha-helix based protein networks is insensitive to the presence of structural flaws in the protein network, only marginally affecting their overall strength. Our findings may help to explain the ability of cells to undergo large deformation without catastrophic failure while providing significant mechanical resistance. PMID:19547709

Selection Bias in Students' Evaluation of Teaching: Causes of Student Absenteeism and Its Consequences for Course Ratings and Rankings

ERIC Educational Resources Information Center

Wolbring, Tobias; Treischl, Edgar

2016-01-01

Systematic sampling error due to self-selection is a common topic in methodological research and a key challenge for every empirical study. Since selection bias is often not sufficiently considered as a potential flaw in research on and evaluations in higher education, the aim of this paper is to raise awareness for the topic using the case of…

FAVOR: A new fracture mechanics code for reactor pressure vessels subjected to pressurized thermal shock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickson, T.L.

1993-01-01

This report discusses probabilistic fracture mechanics (PFM) analysis which is a major element of the comprehensive probabilistic methodology endorsed by the NRC for evaluation of the integrity of Pressurized Water Reactor (PWR) pressure vessels subjected to pressurized-thermal-shock (PTS) transients. It is anticipated that there will be an increasing need for an improved and validated PTS PFM code which is accepted by the NRC and utilities, as more plants approach the PTS screening criteria and are required to perform plant-specific analyses. The NRC funded Heavy Section Steel Technology (HSST) Program at Oak Ridge National Laboratories is currently developing the FAVOR (Fracturemore » Analysis of Vessels: Oak Ridge) PTS PFM code, which is intended to meet this need. The FAVOR code incorporates the most important features of both OCA-P and VISA-II and contains some new capabilities such as PFM global modeling methodology, the capability to approximate the effects of thermal streaming on circumferential flaws located inside a plume region created by fluid and thermal stratification, a library of stress intensity factor influence coefficients, generated by the NQA-1 certified ABAQUS computer code, for an adequate range of two and three dimensional inside surface flaws, the flexibility to generate a variety of output reports, and user friendliness.« less

FAVOR: A new fracture mechanics code for reactor pressure vessels subjected to pressurized thermal shock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickson, T.L.

1993-04-01

This report discusses probabilistic fracture mechanics (PFM) analysis which is a major element of the comprehensive probabilistic methodology endorsed by the NRC for evaluation of the integrity of Pressurized Water Reactor (PWR) pressure vessels subjected to pressurized-thermal-shock (PTS) transients. It is anticipated that there will be an increasing need for an improved and validated PTS PFM code which is accepted by the NRC and utilities, as more plants approach the PTS screening criteria and are required to perform plant-specific analyses. The NRC funded Heavy Section Steel Technology (HSST) Program at Oak Ridge National Laboratories is currently developing the FAVOR (Fracturemore » Analysis of Vessels: Oak Ridge) PTS PFM code, which is intended to meet this need. The FAVOR code incorporates the most important features of both OCA-P and VISA-II and contains some new capabilities such as PFM global modeling methodology, the capability to approximate the effects of thermal streaming on circumferential flaws located inside a plume region created by fluid and thermal stratification, a library of stress intensity factor influence coefficients, generated by the NQA-1 certified ABAQUS computer code, for an adequate range of two and three dimensional inside surface flaws, the flexibility to generate a variety of output reports, and user friendliness.« less

Letter to the editor concerning the article "Bar velocities capable of optimising the muscle power in strength-power exercises" by Loturco, Pereira, Abad, Tabares, Moraes, Kobal, Kitamura & Nakamura (2017).

PubMed

Jaric, Slobodan; Garcia Ramos, Amador

2018-05-01

Loturco and co-workers (2017) recently published data in the Journal of Sports Sciences to present the optimum loading magnitudes regarding the maximization of the "mean propulsive power" of the leg and arm muscles. Among the most important findings were that (1) the recorded power in the squat and squat jump exercises was markedly low, (2) the optimum external load that maximized the power in the same exercises was close to 100% of body weight, while (3) the ballistic bench press throw revealed smaller power than the regular bench press typically performed with relatively low level of muscle activation towards the end of the propulsive lifting phase. The findings are either counter-intuitive, or contradict the literature findings, or both, and we believe that they originate from apparent methodological flaws. The first one is neglecting the force acting against the body segments moved together with the external load that is particularly high in squat exercises. The second one is an erroneous calculation of the propulsive phase that included a part of the bar's flight time. Both of these methodological flaws are frequent in the literature and could be associated with the improper use and calculation of variables when utilizing linear position transducers.

Ethical and Legal Implications of the Methodological Crisis in Neuroimaging.

PubMed

Kellmeyer, Philipp

2017-10-01

Currently, many scientific fields such as psychology or biomedicine face a methodological crisis concerning the reproducibility, replicability, and validity of their research. In neuroimaging, similar methodological concerns have taken hold of the field, and researchers are working frantically toward finding solutions for the methodological problems specific to neuroimaging. This article examines some ethical and legal implications of this methodological crisis in neuroimaging. With respect to ethical challenges, the article discusses the impact of flawed methods in neuroimaging research in cognitive and clinical neuroscience, particularly with respect to faulty brain-based models of human cognition, behavior, and personality. Specifically examined is whether such faulty models, when they are applied to neurological or psychiatric diseases, could put patients at risk, and whether this places special obligations on researchers using neuroimaging. In the legal domain, the actual use of neuroimaging as evidence in United States courtrooms is surveyed, followed by an examination of ways that the methodological problems may create challenges for the criminal justice system. Finally, the article reviews and promotes some promising ideas and initiatives from within the neuroimaging community for addressing the methodological problems.

Conservation Efforts and Malaria in the Brazilian Amazon

PubMed Central

Hahn, Micah B.; Olson, Sarah H.; Vittor, Amy Y.; Barcellos, Christovam; Patz, Jonathan A.; Pan, William

2014-01-01

We respond to Valle and Clark,1 who assert that “conservation efforts may increase malaria burden in the Brazilian Amazon,” because the relationship between forest cover and malaria incidence was stronger than the effect of the deforestation rate.1 We contend that their conclusion is flawed because of limitations in their methodology that we discuss in detail. Most important are the exclusion of one-half the original data without a discussion of selection bias, the lack of model adjustment for either population growth or migration, and the crude classifications of land cover and protected areas that lead to aggregation bias.1 Of greater significance, we stress the need for caution in the interpretation of data that could have profound effects on regional land use decisions. PMID:24277787

The methodological defense of realism scrutinized.

PubMed

Wray, K Brad

2015-12-01

I revisit an older defense of scientific realism, the methodological defense, a defense developed by both Popper and Feyerabend. The methodological defense of realism concerns the attitude of scientists, not philosophers of science. The methodological defense is as follows: a commitment to realism leads scientists to pursue the truth, which in turn is apt to put them in a better position to get at the truth. In contrast, anti-realists lack the tenacity required to develop a theory to its fullest. As a consequence, they are less likely to get at the truth. My aim is to show that the methodological defense is flawed. I argue that a commitment to realism does not always benefit science, and that there is reason to believe that a research community with both realists and anti-realists in it may be better suited to advancing science. A case study of the Copernican Revolution in astronomy supports this claim. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reduction of Calcofluor in Solithane Conformal Coatings of Printed Wiring Boards

NASA Technical Reports Server (NTRS)

Miller, Michael K.

1997-01-01

An investigation on the outgassing of a pigment employed as a fluorescent medium in conformal coatings has been performed. The conformal coatings in question are used to protect printed wiring boards from environmental hazards such as dust and moisture. The pigment is included in the coating at low concentration to allow visual inspection of the conformal coating for flaw detection. Calcofluor, the fluorescent pigment has been found to be a significant outgasser under vacuum conditions and a potential source of contamination to flight hardware. A minimum acceptable concentration of Calcofluor for flaw detection is desirable. Tests have been carried out using a series of Solithane(TM) conformal coating samples, with progressively lower Calcofluor concentrations, to determine the minimum required concentration of Calcofluor. It was found that the concentration of Calcofluor could be reduced from 0.115% to 0.0135% without significant loss in the ability to detect flaws, while at the same time significant reductions in Calcofluor outgassing and possible contamination of systems could be realized.

SURROGATE MODEL DEVELOPMENT AND VALIDATION FOR RELIABILITY ANALYSIS OF REACTOR PRESSURE VESSELS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoffman, William M.; Riley, Matthew E.; Spencer, Benjamin W.

In nuclear light water reactors (LWRs), the reactor coolant, core and shroud are contained within a massive, thick walled steel vessel known as a reactor pressure vessel (RPV). Given the tremendous size of these structures, RPVs typically contain a large population of pre-existing flaws introduced in the manufacturing process. After many years of operation, irradiation-induced embrittlement makes these vessels increasingly susceptible to fracture initiation at the locations of the pre-existing flaws. Because of the uncertainty in the loading conditions, flaw characteristics and material properties, probabilistic methods are widely accepted and used in assessing RPV integrity. The Fracture Analysis of Vesselsmore » – Oak Ridge (FAVOR) computer program developed by researchers at Oak Ridge National Laboratory is widely used for this purpose. This program can be used in order to perform deterministic and probabilistic risk-informed analyses of the structural integrity of an RPV subjected to a range of thermal-hydraulic events. FAVOR uses a one-dimensional representation of the global response of the RPV, which is appropriate for the beltline region, which experiences the most embrittlement, and employs an influence coefficient technique to rapidly compute stress intensity factors for axis-aligned surface-breaking flaws. The Grizzly code is currently under development at Idaho National Laboratory (INL) to be used as a general multiphysics simulation tool to study a variety of degradation mechanisms in nuclear power plant components. The first application of Grizzly has been to study fracture in embrittled RPVs. Grizzly can be used to model the thermo-mechanical response of an RPV under transient conditions observed in a pressurized thermal shock (PTS) scenario. The global response of the vessel provides boundary conditions for local 3D models of the material in the vicinity of a flaw. Fracture domain integrals are computed to obtain stress intensity factors, which can in turn be used to assess whether a fracture would initiate at a pre-existing flaw. To use Grizzly for probabilistic analysis, it is necessary to have a way to rapidly evaluate stress intensity factors. To accomplish this goal, a reduced order model (ROM) has been developed to efficiently represent the behavior of a detailed 3D Grizzly model used to calculate fracture parameters. This approach uses the stress intensity factor influence coefficient method that has been used with great success in FAVOR. Instead of interpolating between tabulated solutions, as FAVOR does, the ROM approach uses a response surface methodology to compute fracture solutions based on a sampled set of results used to train the ROM. The main advantages of this approach are that the process of generating the training data can be fully automated, and the procedure can be readily used to consider more general flaw configurations. This paper demonstrates the procedure used to generate a ROM to rapidly compute stress intensity factors for axis-aligned flaws. The results from this procedure are in good agreement with those produced using the traditional influence coefficient interpolation procedure, which gives confidence in this method. This paves the way for applying this procedure for more general flaw configurations.« less

Novel Repair Technique for Life-Extension of Hydraulic Turbine Components in Hydroelectric Power Stations

NASA Astrophysics Data System (ADS)

Hiramatsu, Yoichi; Ishii, Jun; Funato, Kazuhiro

A significant number of hydraulic turbines operated in Japan were installed in the first half of the 20th century. Today, aging degradation and flaws are observed in these turbine equipments. So far, Japanese engineers have applied NDI technology of Ultrasonic Testing (UT) to detect the flaws, and after empirical evaluation of the remaining life they decided an adequate moment to replace the equipments. Since the replacement requires a large-scale field site works and high-cost, one of the solutions for life-extension of the equipments is introduction of repair services. We have been working in order to enhance the accuracy of results during the detection of flaws and flaws dimensioning, in particular focusing on the techniques of Tip-echo, TOFD and Phased-Array UT, accompanied by the conventional UT. These NDI methods made possible to recognize the entire image of surface and embedded flaws with complicated geometry. Then, we have developed an evaluation system of these flaws based on the theory of crack propagation, of the logic of crack growth driven by the stress-intensity factor of the crack tip front. The sophisticated evaluation system is constituted by a hand-made software and database of stress-intensity factor. Based on these elemental technologies, we propose a technique of repair welding to provide a life-extension of hydraulic turbine components.

Computational Reduction of Specimen Noise to Enable Improved Thermography Characterization of Flaws in Graphite Polymer Composites

NASA Technical Reports Server (NTRS)

Winfree, William P.; Howell, Patricia A.; Zalameda, Joseph N.

2014-01-01

Flaw detection and characterization with thermographic techniques in graphite polymer composites are often limited by localized variations in the thermographic response. Variations in properties such as acceptable porosity, fiber volume content and surface polymer thickness result in variations in the thermal response that in general cause significant variations in the initial thermal response. These result in a "noise" floor that increases the difficulty of detecting and characterizing deeper flaws. A method is presented for computationally removing a significant amount of the "noise" from near surface porosity by diffusing the early time response, then subtracting it from subsequent responses. Simulations of the thermal response of a composite are utilized in defining the limitations of the technique. This method for reducing the data is shown to give considerable improvement characterizing both the size and depth of damage. Examples are shown for data acquired on specimens with fabricated delaminations and impact damage.

Computational reduction of specimen noise to enable improved thermography characterization of flaws in graphite polymer composites

NASA Astrophysics Data System (ADS)

Winfree, William P.; Howell, Patricia A.; Zalameda, Joseph N.

2014-05-01

Flaw detection and characterization with thermographic techniques in graphite polymer composites are often limited by localized variations in the thermographic response. Variations in properties such as acceptable porosity, fiber volume content and surface polymer thickness result in variations in the thermal response that in general cause significant variations in the initial thermal response. These result in a "noise" floor that increases the difficulty of detecting and characterizing deeper flaws. A method is presented for computationally removing a significant amount of the "noise" from near surface porosity by diffusing the early time response, then subtracting it from subsequent responses. Simulations of the thermal response of a composite are utilized in defining the limitations of the technique. This method for reducing the data is shown to give considerable improvement characterizing both the size and depth of damage. Examples are shown for data acquired on specimens with fabricated delaminations and impact damage.

Stochastic model for fatigue crack size and cost effective design decisions. [for aerospace structures

NASA Technical Reports Server (NTRS)

Hanagud, S.; Uppaluri, B.

1975-01-01

This paper describes a methodology for making cost effective fatigue design decisions. The methodology is based on a probabilistic model for the stochastic process of fatigue crack growth with time. The development of a particular model for the stochastic process is also discussed in the paper. The model is based on the assumption of continuous time and discrete space of crack lengths. Statistical decision theory and the developed probabilistic model are used to develop the procedure for making fatigue design decisions on the basis of minimum expected cost or risk function and reliability bounds. Selections of initial flaw size distribution, NDT, repair threshold crack lengths, and inspection intervals are discussed.

Characterizing team performance in network-centric operations: philosophical and methodological issues.

PubMed

Bolia, Robert S; Nelson, W Todd

2007-05-01

The recently promulgated doctrine of network-centric warfare suggests that increases in shared situation awareness and self-synchronization will be emergent properties of densely connected military networks. What it fails to say is how these enhancements are to be measured. The present article frames the discussion as a question of how to characterize team performance, and considers such performance in the context of its hypothetical components: situation awareness, workload, and error. This examination concludes that reliable measures of these constructs are lacking for teams, even when they exist for individual operators, and that this is due to philosophical and/or methodological flaws in their conceptual development. Additional research is recommended to overcome these deficiencies, as well as consideration of novel multidisciplinary approaches that draw on methodologies employed in the social, physical, and biological sciences.

Elastic-Plastic Fracture Mechanics Analysis of Critical Flaw Size in ARES I-X Flange-to-Skin Welds

NASA Technical Reports Server (NTRS)

Chell, G. Graham; Hudak, Stephen J., Jr.

2008-01-01

NASA's Ares 1 Upper Stage Simulator (USS) is being fabricated from welded A516 steel. In order to insure the structural integrity of these welds it is of interest to calculate the critical initial flaw size (CIFS) to establish rational inspection requirements. The CIFS is in turn dependent on the critical final flaw size (CFS), as well as fatigue flaw growth resulting from transportation, handling and service-induced loading. These calculations were made using linear elastic fracture mechanics (LEFM), which are thought to be conservative because they are based on a lower bound, so called elastic, fracture toughness determined from tests that displayed significant plasticity. Nevertheless, there was still concern that the yield magnitude stresses generated in the flange-to-skin weld by the combination of axial stresses due to axial forces, fit-up stresses, and weld residual stresses, could give rise to significant flaw-tip plasticity, which might render the LEFM results to be non-conservative. The objective of the present study was to employ Elastic Plastic Fracture Mechanics (EPFM) to determine CFS values, and then compare these values to CFS values evaluated using LEFM. CFS values were calculated for twelve cases involving surface and embedded flaws, EPFM analyses with and without plastic shakedown of the stresses, LEFM analyses, and various welding residual stress distributions. For the cases examined, the computed CFS values based on elastic analyses were the smallest in all instances where the failures were predicted to be controlled by the fracture toughness. However, in certain cases, the CFS values predicted by the elastic-plastic analyses were smaller than those predicted by the elastic analyses; in these cases the failure criteria were determined by a breakdown in stress intensity factor validity limits for deep flaws (a greater than 0.90t), rather than by the fracture toughness. Plastic relaxation of stresses accompanying shakedown always increases the calculated CFS values compared to the CFS values determined without shakedown. Thus, it is conservative to ignore shakedown effects.

Stress intensity factors for deep cracks emanating from the corner formed by a hole intersecting a plate surface

NASA Technical Reports Server (NTRS)

Mcgowan, J. J.; Smith, C. W.

1976-01-01

The stress intensity factors (SIFs) at the end points of flaws emanating from the corner formed by the intersection of a plate with a hole were determined using stress freezing photoelasticity and a numerical technique known as the Taylor series correction method to extract the SIF values from the photoelastic data. The geometries studied were crack depth to thickness ratios of about 0.2, 0.5, and 0.75; crack depth to crack length ratios of about 1.0 to 2.0; and crack length to hole radius ratios of about 0.5 to 2.0. The SIFs were determined at the intersection of the flaw border with the plate surface (KS) and with the edge of the hole (KH). It is shown that extension of a crack emanating from a corner of intersection of a hole with a plate under monotonically increasing load is not self-similar and that as the flaw depth increases, KH decreases and KS increases. Existing theories and design criteria significantly overestimate the SIF at both the hole and the surface except for shallow flaws at the hole and deep flaws at the surface.

In-situ thermography of automated fiber placement parts

NASA Astrophysics Data System (ADS)

Gregory, Elizabeth D.; Juarez, Peter D.

2018-04-01

Automated fiber placement (AFP) provides precision and repeatable manufacturing of both simple and complex geometry composite parts. However, AFP also introduces the possibility for unique flaws such as overlapping tows, gaps between tows, tow twists, lack of layer adhesion and foreign object debris. These types of flaws can all result in a significant loss of performance in the final part. The current inspection method for these flaws is a costly and time intensive visual inspection of each ply layer. This work describes some initial efforts to incorporate thermal inspection on the AFP head and analysis of the data to identify the previously mentioned flaws. Previous bench-top laboratory experiments demonstrated that laps, gaps, and twists were identified from a thermal image. The AFP head uses an on- board lamp to preheat the surface of the part during layup to increase ply consolidation. The preheated surface is used as a thermal source to observe the state of the new material after compaction. We will present data collected with the Integrated Structural Assembly of Advanced Composites (ISAAC) AFP machine at Langley Research Center showing that changes to the temperature profile is sufficient for identifying all types of flaws.

Solution to certain problems in the failure of composite structures

NASA Astrophysics Data System (ADS)

Goodsell, Johnathan

The present work contains the solution of two problems in composite structures. In the first, an approximate elasticity solution for prediction of the displacement, stress and strain fields within the m-layer, symmetric and balanced angle-ply composite laminate of finite-width subjected anticlastic bending deformation is developed. The solution is shown to recover classical laminated plate theory predictions at interior regions of the laminate and thereby illustrates the boundary layer character of this interlaminar phenomenon. The results exhibit the anticipated response in congruence with the solutions for uniform axial extension and uniform temperature change, where divergence of the interlaminar shearing stress is seen to occur at the intersection of the free-edge and planes between lamina of +theta and -theta orientation. The analytical results show excellent agreement with the finite-element predictions for the same boundary-value problem and thereby provide an efficient and compact solution available for parametric studies of the influence of geometry and material properties. The solution is combined with previously developed solutions for uniform axial extension and uniform temperature change of the identical laminate and the combined solution is exercised to compare the relative magnitudes of free-edge phenomenon arising from the different loading conditions, to study very thick laminates and laminates where the laminate width is less than the laminate thickness. Significantly, it was demonstrated that the solution is valid for arbitrary stacking sequence and the solution was exercised to examine antisymmetric and non-symmetric laminates. Finally, the solution was exercised to determine the dimensions of the boundary layer for very large numbers of layers. It was found that the dimension of the boundary layer width in bending is approximately twice that in uniform axial extension and uniform temperature change. In the second, the intrinsic flaw concept is extended to the determination of the intrinsic flaw length and the prediction of performance variability in the 10-degree off-axis specimen. The intrinsic flaw is defined as a fracture mechanics-type, through-thickness planar crack extending in the fiber direction from the failure initiation site of length, a. The distribution of intrinsic flaw lengths is postulated from multiple tests of 10-degree off-axis specimens by calculating the length of flaw that would cause fracture at each measured failure site and failure load given the fracture toughness of the material. The intrinsic flaw lengths on the homogeneous and micromechanical scales for unnotched (no hole) and specimens containing a centrally-located, through-thickness circular hole are compared. 8 hole-diameters ranging from 1.00--12.7 mm are considered. On the micromechanical scale, the intrinsic flaw ranges between approximately 10 and 100 microns in length, on the order of the relevant microstructural dimensions. The intrinsic flaw lengths on the homogeneous scale are determined to be an order of magnitude greater than that on the micromechanical scale. The effect of variation in the fiber volume fraction on the intrinsic flaw length is also considered. In the strength predictions for the specimens, the intrinsic flaw crack geometry and probability density function of intrinsic flaw lengths calculated from the unnotched specimens allow fracture mechanics predictions of strength variability. The strength prediction is dependent on the flaw density, the number of flaws per unit length along the free-edge. The flaw density is established by matching the predicted strength with the experimental strength. The distribution of intrinsic flaw lengths is used with the strength variability of the unnotched and of open-hole specimens to determine the flaw density at each hole-size. The flaw density is shown to be related to the fabrication machining speed suggesting machining damage as a mechanism for the hole-size dependence of the flaw density. (Abstract shortened by UMI.)

Optimizing probability of detection point estimate demonstration

NASA Astrophysics Data System (ADS)

Koshti, Ajay M.

2017-04-01

The paper provides discussion on optimizing probability of detection (POD) demonstration experiments using point estimate method. The optimization is performed to provide acceptable value for probability of passing demonstration (PPD) and achieving acceptable value for probability of false (POF) calls while keeping the flaw sizes in the set as small as possible. POD Point estimate method is used by NASA for qualifying special NDE procedures. The point estimate method uses binomial distribution for probability density. Normally, a set of 29 flaws of same size within some tolerance are used in the demonstration. Traditionally largest flaw size in the set is considered to be a conservative estimate of the flaw size with minimum 90% probability and 95% confidence. The flaw size is denoted as α90/95PE. The paper investigates relationship between range of flaw sizes in relation to α90, i.e. 90% probability flaw size, to provide a desired PPD. The range of flaw sizes is expressed as a proportion of the standard deviation of the probability density distribution. Difference between median or average of the 29 flaws and α90 is also expressed as a proportion of standard deviation of the probability density distribution. In general, it is concluded that, if probability of detection increases with flaw size, average of 29 flaw sizes would always be larger than or equal to α90 and is an acceptable measure of α90/95PE. If NDE technique has sufficient sensitivity and signal-to-noise ratio, then the 29 flaw-set can be optimized to meet requirements of minimum required PPD, maximum allowable POF, requirements on flaw size tolerance about mean flaw size and flaw size detectability requirements. The paper provides procedure for optimizing flaw sizes in the point estimate demonstration flaw-set.

Crack Growth of D6 Steel in Air and High Pressure Oxygen

NASA Technical Reports Server (NTRS)

Bixler, W. D.; Engstrom, W. L.

1971-01-01

Fracture and subcritical flaw growth characteristics were experimentally deter­mined for electroless nickel plated D6 steel in dry air and high pressure oxygen environments as applicable to the Lunar Module/Environmental Control System (LM/ECS) descent gaseous oxygen (GOX) tank. The material tested included forgings, plate, and actual LM/ECS descent GOX tank material. Parent metal and TIG (tungsten inert gas) welds were tested. Tests indicate that proof testing the tanks at 4000 pounds per square inch or higher will insure safe operation at 3060 pounds per square inch. Although significant flaw growth can occur during proofing, subsequent growth of flaws during normal tank operation is negligible.

Drug companies' evidence to justify advertising.

PubMed

Wade, V A; Mansfield, P R; McDonald, P J

1989-11-25

Ten international pharmaceutical companies were asked by letter to supply their best evidence in support of marketing claims for seventeen products. Fifteen replies were received. Seven replies cited a total of 67 references: 31 contained relevant original data and only 13 were controlled trials, all of which had serious methodological flaws. There were four reports of changes in advertising claims and one company ceased marketing nikethamide in the third world. Standards of evidence used to justify advertising claims are inadequate.

The prevention of shin splints in sports: a systematic review of literature.

PubMed

Thacker, Stephen B; Gilchrist, Julie; Stroup, Donna F; Kimsey, C Dexter

2002-01-01

To review the published and unpublished evidence regarding risk factors associated with shin splints, assess the effectiveness of prevention strategies, and offer evidence-based recommendations to coaches, athletes, and researchers. We searched electronic data bases without language restriction, identified citations from reference sections of research papers retrieved, contacted experts in the field, and searched the Cochrane Collaboration. Of the 199 citations identified, we emphasized results of the four reports that compared methods to prevent shin splints. We assessed the methodologic quality of these reports by using a standardized instrument. The use of shock-absorbent insoles, foam heel pads, heel cord stretching, alternative footwear, as well as graduated running programs among military recruits have undergone assessment in controlled trials. There is no strong support for any of these interventions, and each of the four controlled trials is limited methodologically. Median quality scores in these four studies ranged from 29 to 47, and serious flaws in study design, control of bias, and statistical methods were identified. Our review yielded little objective evidence to support widespread use of any existing interventions to prevent shin splints. The most encouraging evidence for effective prevention of shin splints involves the use of shock-absorbing insoles. However, serious flaws in study design and implementation constrain the work in this field thus far. A rigorously implemented research program is critically needed to address this common sports medicine problem.

The effectiveness of the practice of correction and republication in the biomedical literature

PubMed Central

Peterson, Gabriel M

2010-01-01

Objective: This research measures the effectiveness of the practice of correction and republication of invalidated articles in the biomedical literature by analyzing the rate of citation of the flawed and corrected versions of scholarly articles over time. If the practice of correction and republication is effective, then the incidence of citation of flawed versions should diminish over time and increased incidence of citation of the republication should be observed. Methods: This is a bibliometric study using citation analysis and statistical analysis of pairs of flawed and corrected articles in MEDLINE and Web of Science. Results: The difference between citation levels of flawed originals and corrected republications does not approach statistical significance until eight to twelve years post-republication. Results showed substantial variability among bibliographic sources in their provision of authoritative bibliographic information. Conclusions: Correction and republication is a marginally effective biblioremediative practice. The data suggest that inappropriate citation behavior may be partly attributable to author ignorance. PMID:20428278

Analysis of Subcritical Crack Growth in Dental Ceramics Using Fracture Mechanics and Fractography

PubMed Central

Taskonak, Burak; Griggs, Jason A.; Mecholsky, John J.; Yan, Jia-Hau

2008-01-01

Objectives The aim of this study was to test the hypothesis that the flexural strengths and critical flaw sizes of dental ceramic specimens will be affected by the testing environment and stressing rate even though their fracture toughness values will remain the same. Methods Ceramic specimens were prepared from an aluminous porcelain (Vitadur Alpha; VITA Zahnfabrik, Bad Säckingen, Germany) and an alumina-zirconia-glass composite (In-Ceram® Zirconia; VITA Zahnfabrik). Three hundred uniaxial flexure specimens (150 of each material) were fabricated to dimensions of 25 mm × 4 mm × 1.2 mm according to the ISO 6872 standard. Each group of 30 specimens was fractured in water using one of four different target stressing rates ranging on a logarithmic scale from 0.1 to 100 MPa/s for Vitadur Alpha and from 0.01 to 10 MPa/s for In-Ceram® Zirconia. The fifth group was tested in inert environment (oil) with a target stressing rate of 100 MPa/s for Vitadur Alpha and 1000 MPa/s for In-Ceram® Zirconia. The effects of stressing rate and environment on flexural strength, critical flaw size, and fracture toughness were analyzed statistically by Kruskal-Wallis one-way ANOVA on ranks followed by post-hoc comparisons using Dunn’s test (α=0.05). In addition, 20 Vitadur Alpha specimens were fabricated with controlled flaws to simplify fractography. Half of these specimens were fracture tested in water and half in oil at a target stressing rate of 100 MPa/s, and the results were compared using Mann-Whitney rank sum tests (α=0.05). A logarithmic regression model was used to determine the fatigue parameters for each material. Results For each ceramic composition, specimens tested in oil had significantly higher strength (P≤0.05) and smaller critical flaw size (significant for Vitadur Alpha, P≤0.05) than those tested in water but did not have significantly different fracture toughness (P>0.05). Specimens tested at faster stressing rates had significantly higher strength (P≤0.05) but did not have significantly different fracture toughness (P>0.05). Regarding critical flaw size, stressing rate had a significant effect for In-Ceram® Zirconia specimens (P≤0.05) but not for Vitadur Alpha specimens (P>0.05). Fatigue parameters, n and ln B, were 38.4 and −12.7 for Vitadur Alpha and were 13.1 and 10.4 for In-Ceram® Zirconia. Significance Moisture assisted subcritical crack growth had a more deleterious effect on In-Ceram® Zirconia core ceramic than on Vitadur Alpha porcelain. Fracture surface analysis identified fracture surface features that can potentially mislead investigators into misidentifying the critical flaw. PMID:17845817

Elastic plastic fracture mechanics methodology for surface cracks

NASA Technical Reports Server (NTRS)

Ernst, Hugo A.; Lambert, D. M.

1994-01-01

The Elastic Plastic Fracture Mechanics Methodology has evolved significantly in the last several years. Nevertheless, some of these concepts need to be extended further before the whole methodology can be safely applied to structural parts. Specifically, there is a need to include the effect of constraint in the characterization of material resistance to crack growth and also to extend these methods to the case of 3D defects. As a consequence, this project was started as a 36 month research program with the general objective of developing an elastic plastic fracture mechanics methodology to assess the structural reliability of pressure vessels and other parts of interest to NASA which may contain flaws. The project is divided into three tasks that deal with (1) constraint and thickness effects, (2) three-dimensional cracks, and (3) the Leak-Before-Burst (LBB) criterion. This report period (March 1994 to August 1994) is a continuation of attempts to characterize three dimensional aspects of fracture present in 'two dimensional' or planar configuration specimens (Chapter Two), especially, the determination of, and use of, crack face separation data. Also, included, are a variety of fracture resistance testing results (J(m)R-curve format) and a discussion regarding two materials of NASA interest (6061-T651 Aluminum alloy and 1N718-STA1 nickel-base super alloy) involving a bases for like constraint in terms of ligament dimensions, and their comparison to the resulting J(m)R-curves (Chapter Two).

A systematic review of the diagnostic accuracy of provocative tests of the neck for diagnosing cervical radiculopathy

PubMed Central

Pool, Jan J. M.; van Tulder, Maurits W.; Riphagen, Ingrid I.; de Vet, Henrica C. W.

2006-01-01

Clinical provocative tests of the neck, which position the neck and arm inorder to aggravate or relieve arm symptoms, are commonly used in clinical practice in patients with a suspected cervical radiculopathy. Their diagnostic accuracy, however, has never been examined in a systematic review. A comprehensive search was conducted in order to identify all possible studies fulfilling the inclusion criteria. A study was included if: (1) any provocative test of the neck for diagnosing cervical radiculopathy was identified; (2) any reference standard was used; (3) sensitivity and specificity were reported or could be (re-)calculated; and, (4) the publication was a full report. Two reviewers independently selected studies, and assessed methodological quality. Only six studies met the inclusion criteria, which evaluated five provocative tests. In general, Spurling’s test demonstrated low to moderate sensitivity and high specificity, as did traction/neck distraction, and Valsalva’s maneuver. The upper limb tension test (ULTT) demonstrated high sensitivity and low specificity, while the shoulder abduction test demonstrated low to moderate sensitivity and moderate to high specificity. Common methodological flaws included lack of an optimal reference standard, disease progression bias, spectrum bias, and review bias. Limitations include few primary studies, substantial heterogeneity, and numerous methodological flaws among the studies; therefore, a meta-analysis was not conducted. This review suggests that, when consistent with the history and other physical findings, a positive Spurling’s, traction/neck distraction, and Valsalva’s might be indicative of a cervical radiculopathy, while a negative ULTT might be used to rule it out. However, the lack of evidence precludes any firm conclusions regarding their diagnostic value, especially when used in primary care. More high quality studies are necessary in order to resolve this issue. PMID:17013656

An appraisal of the utility or futility of ENT consultant postal questionnaires.

PubMed

Ryan, Stephen; Saunders, J; Clarke, E; Fenton, J E

2013-03-01

Despite an increase in ENT postal questionnaires, the quality of their methodology has been questioned (Ramphul et al. in J Laryngol Otol 119:175-178, 1). This retrospective study examined whether quality and utility of such questionnaires published since 2005 has improved. Seventeen consultant postal questionnaires published between 2005 and 2012 were reviewed. Quality of questionnaires was assessed using a 30-point score based on compliance with 15 criteria previously established to evaluate postal questionnaire study-design (Ramphul et al. in J Laryngol Otol 119:175-178, 1). Citation rates were used as an indicator of utility. The specific comments made in each citing paper was reviewed providing information on whether questionnaire findings (a) had an impact on clinical practice, (b) were the citing comments positive, (c) negative or (d) non-specific. Recurrent methodological flaws were identified in all questionnaires. The average score assigned was 44 %, versus 32 % previously reported (Ramphul et al. in J Laryngol Otol 119:175-178, 1) (P < 0.01, Student's t test). The low citation rate demonstrates poor utility for postal questionnaires. Citations were general non-specific referencing with no clear indication that questionnaire findings positively impacted clinical practice. In conclusion, although the quality of ENT postal questionnaire has improved since the original study (Ramphul et al. in J Laryngol Otol 119:175-178, 1), important recurring methodological flaws still exist. The poor utility, based on low citation rates, also reflects the continued deficiencies in design quality. It is recommended that authors of questionnaire-based research should ensure that guidelines for questionnaire design are adhered in order to improve the validity of findings and hence impact on clinical practice.

Lifetime Reliability Prediction of Ceramic Structures Under Transient Thermomechanical Loads

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Jadaan, Osama J.; Gyekenyesi, John P.

2005-01-01

An analytical methodology is developed to predict the probability of survival (reliability) of ceramic components subjected to harsh thermomechanical loads that can vary with time (transient reliability analysis). This capability enables more accurate prediction of ceramic component integrity against fracture in situations such as turbine startup and shutdown, operational vibrations, atmospheric reentry, or other rapid heating or cooling situations (thermal shock). The transient reliability analysis methodology developed herein incorporates the following features: fast-fracture transient analysis (reliability analysis without slow crack growth, SCG); transient analysis with SCG (reliability analysis with time-dependent damage due to SCG); a computationally efficient algorithm to compute the reliability for components subjected to repeated transient loading (block loading); cyclic fatigue modeling using a combined SCG and Walker fatigue law; proof testing for transient loads; and Weibull and fatigue parameters that are allowed to vary with temperature or time. Component-to-component variation in strength (stochastic strength response) is accounted for with the Weibull distribution, and either the principle of independent action or the Batdorf theory is used to predict the effect of multiaxial stresses on reliability. The reliability analysis can be performed either as a function of the component surface (for surface-distributed flaws) or component volume (for volume-distributed flaws). The transient reliability analysis capability has been added to the NASA CARES/ Life (Ceramic Analysis and Reliability Evaluation of Structures/Life) code. CARES/Life was also updated to interface with commercially available finite element analysis software, such as ANSYS, when used to model the effects of transient load histories. Examples are provided to demonstrate the features of the methodology as implemented in the CARES/Life program.

Clinical exercise interventions in alcohol use disorders: a systematic review.

PubMed

Giesen, Esther S; Deimel, Hubertus; Bloch, Wilhelm

2015-05-01

The therapeutic impact of exercise interventions in psychiatric diseases such as depression, anxiety and schizophrenia has already been proven through several reviews whereas substance use disorders such as alcohol use disorders (AUD) have so far less frequently been a matter of investigation. Although several publications have summarized studies focusing on physical activities in substance use disorders, no systematic review exists summarizing the evidence of exercise interventions in AUD. A total of 14 studies using the Medline Database, CCMed, Cochrane Library and PsychINFO were identified and met the inclusion criteria. In order to evaluate the evidence, we used the evaluation system of the Oxford Centre for Evidence-Based Medicine (2011). Due to methodological flaws the overall evidence of the studies is rated level "3" but primarily findings confirm that exercise interventions as a complementary treatment component in AUD are feasible and safe. No adverse events were reported. This systematic review indicates that exercise may have beneficial effects on certain domains of physical functioning including VO2max, basal heart rate, physical activity level and strength. Inconsistent effects with a slight trend towards a positive effect on anxiety, mood management, craving, and drinking behavior have been shown and need to be verified. Results must be interpreted cautiously due to the numerous methodological flaws and the heterogeneity of the interventions and measures. However, according to preclinical studies several mechanisms of action are conceivable, especially as to alcohol-related outcomes and additionally seem to be promising. RCTs with high methodological quality are urgently needed in future research to establish evidence-based exercise recommendations for the treatment of AUD. Copyright © 2015 Elsevier Inc. All rights reserved.

An improved approach for flight readiness certification: Probabilistic models for flaw propagation and turbine blade failure. Volume 1: Methodology and applications

NASA Technical Reports Server (NTRS)

Moore, N. R.; Ebbeler, D. H.; Newlin, L. E.; Sutharshana, S.; Creager, M.

1992-01-01

An improved methodology for quantitatively evaluating failure risk of spaceflight systems to assess flight readiness and identify risk control measures is presented. This methodology, called Probabilistic Failure Assessment (PFA), combines operating experience from tests and flights with analytical modeling of failure phenomena to estimate failure risk. The PFA methodology is of particular value when information on which to base an assessment of failure risk, including test experience and knowledge of parameters used in analytical modeling, is expensive or difficult to acquire. The PFA methodology is a prescribed statistical structure in which analytical models that characterize failure phenomena are used conjointly with uncertainties about analysis parameters and/or modeling accuracy to estimate failure probability distributions for specific failure modes. These distributions can then be modified, by means of statistical procedures of the PFA methodology, to reflect any test or flight experience. State-of-the-art analytical models currently employed for designs failure prediction, or performance analysis are used in this methodology. The rationale for the statistical approach taken in the PFA methodology is discussed, the PFA methodology is described, and examples of its application to structural failure modes are presented. The engineering models and computer software used in fatigue crack growth and fatigue crack initiation applications are thoroughly documented.

Flaw detection and evaluation

DOEpatents

Wilks, Robert S.; Sturges, Jr., Robert H.

1983-01-01

The invention provides a method of and apparatus for optically inspecting nuclear fuel pellets for surface flaws. The inspection system includes a prism and lens arrangement for scanning the surface of each pellet as the same is rotated. The resulting scan produces data indicative of the extent and shape of each flaw which is employed to generate a flaw quality index for each detected flaw. The flaw quality indexes from all flaws are summed and compared with an acceptable surface quality index. The result of the comparison is utilized to control the acceptance or rejection of the pellet.

Evaluation of speech errors in Putonghua speakers with cleft palate: a critical review of methodology issues.

PubMed

Jiang, Chenghui; Whitehill, Tara L

2014-04-01

Speech errors associated with cleft palate are well established for English and several other Indo-European languages. Few articles describing the speech of Putonghua (standard Mandarin Chinese) speakers with cleft palate have been published in English language journals. Although methodological guidelines have been published for the perceptual speech evaluation of individuals with cleft palate, there has been no critical review of methodological issues in studies of Putonghua speakers with cleft palate. A literature search was conducted to identify relevant studies published over the past 30 years in Chinese language journals. Only studies incorporating perceptual analysis of speech were included. Thirty-seven articles which met inclusion criteria were analyzed and coded on a number of methodological variables. Reliability was established by having all variables recoded for all studies. This critical review identified many methodological issues. These design flaws make it difficult to draw reliable conclusions about characteristic speech errors in this group of speakers. Specific recommendations are made to improve the reliability and validity of future studies, as well to facilitate cross-center comparisons.

Determination of Flaw Size from Thermographic Data

NASA Technical Reports Server (NTRS)

Winfree, William P.; Howell, Patricia A.; Zalameda, Joseph N.

2014-01-01

Conventional methods for reducing the pulsed thermographic responses of delaminations tend to overestimate the size of the flaw. Since the heat diffuses in the plane parallel to the surface, the resulting temperature profile over the flaw is larger than the flaw. A variational method is presented for reducing the thermographic data to produce an estimated size for the flaw that is much closer to the true size of the flaw. The size is determined from the spatial thermal response of the exterior surface above the flaw and a constraint on the length of the contour surrounding the flaw. The technique is applied to experimental data acquired on a flat bottom hole composite specimen.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simonen, E.P.; Johnson, K.I.; Simonen, F.A.

The Vessel Integrity Simulation Analysis (VISA-II) code was developed to allow calculations of the failure probability of a reactor pressure vessel subject to defined pressure/temperature transients. A version of the code, revised by Pacific Northwest Laboratory for the US Nuclear Regulatory Commission, was used to evaluate the sensitivities of calculated through-wall flaw probability to material, flaw and calculational assumptions. Probabilities were more sensitive to flaw assumptions than to material or calculational assumptions. Alternative flaw assumptions changed the probabilities by one to two orders of magnitude, whereas alternative material assumptions typically changed the probabilities by a factor of two or less.more » Flaw shape, flaw through-wall position and flaw inspection were sensitivities examined. Material property sensitivities included the assumed distributions in copper content and fracture toughness. Methods of modeling flaw propagation that were evaluated included arrest/reinitiation toughness correlations, multiple toughness values along the length of a flaw, flaw jump distance for each computer simulation and added error in estimating irradiated properties caused by the trend curve correlation error.« less

Analysis of subcritical crack growth in dental ceramics using fracture mechanics and fractography.

PubMed

Taskonak, Burak; Griggs, Jason A; Mecholsky, John J; Yan, Jia-Hau

2008-05-01

The aim of this study was to test the hypothesis that the flexural strengths and critical flaw sizes of dental ceramic specimens will be affected by the testing environment and stressing rate even though their fracture toughness values will remain the same. Ceramic specimens were prepared from an aluminous porcelain (Vitadur Alpha; VITA Zahnfabrik, Bad Säckingen, Germany) and an alumina-zirconia-glass composite (In-Ceram Zirconia; VITA Zahnfabrik). Three hundred uniaxial flexure specimens (150 of each material) were fabricated to dimensions of 25 mmx4 mmx1.2 mm according to the ISO 6872 standard. Each group of 30 specimens was fractured in water using one of four different target stressing rates ranging on a logarithmic scale from 0.1 to 100 MPa/s for Vitadur Alpha and from 0.01 to 10 MPa/s for In-Ceram Zirconia. The fifth group was tested in inert environment (oil) with a target stressing rate of 100 MPa/s for Vitadur Alpha and 1000 MPa/s for In-Ceram Zirconia. The effects of stressing rate and environment on flexural strength, critical flaw size, and fracture toughness were analyzed statistically by Kruskal-Wallis one-way ANOVA on ranks followed by post hoc comparisons using Dunn's test (alpha=0.05). In addition, 20 Vitadur Alpha specimens were fabricated with controlled flaws to simplify fractography. Half of these specimens were fracture tested in water and half in oil at a target stressing rate of 100 MPa/s, and the results were compared using Mann-Whitney rank sum tests (alpha=0.05). A logarithmic regression model was used to determine the fatigue parameters for each material. For each ceramic composition, specimens tested in oil had significantly higher strength (P0.05). Specimens tested at faster stressing rates had significantly higher strength (P0.05). Regarding critical flaw size, stressing rate had a significant effect for In-Ceram Zirconia specimens (P0.05). Fatigue parameters, n and lnB, were 38.4 and -12.7 for Vitadur Alpha and were 13.1 and 10.4 for In-Ceram Zirconia. Moisture assisted subcritical crack growth had a more deleterious effect on In-Ceram Zirconia core ceramic than on Vitadur Alpha porcelain. Fracture surface analysis identified fracture surface features that can potentially mislead investigators into misidentifying the critical flaw.

An improved approach for flight readiness certification: Probabilistic models for flaw propagation and turbine blade failure. Volume 2: Software documentation

NASA Technical Reports Server (NTRS)

Moore, N. R.; Ebbeler, D. H.; Newlin, L. E.; Sutharshana, S.; Creager, M.

1992-01-01

An improved methodology for quantitatively evaluating failure risk of spaceflights systems to assess flight readiness and identify risk control measures is presented. This methodology, called Probabilistic Failure Assessment (PFA), combines operating experience from tests and flights with analytical modeling of failure phenomena to estimate failure risk. The PFA methodology is of particular value when information on which to base an assessment of failure risk, including test experience and knowledge of parameters used in analytical modeling, is expensive or difficult to acquire. The PFA methodology is a prescribed statistical structure in which analytical models that characterize failure phenomena are used conjointly with uncertainties about analysis parameters and/or modeling accuracy to estimate failure probability distributions for specific failure modes. These distributions can then be modified, by means of statistical procedures of the PFA methodology, to reflect any test or flight experience. State-of-the-art analytical models currently employed for design, failure prediction, or performance analysis are used in this methodology. The rationale for the statistical approach taken in the PFA methodology is discussed, the PFA methodology is described, and examples of its application to structural failure modes are presented. The engineering models and computer software used in fatigue crack growth and fatigue crack initiation applications are thoroughly documented.

Reliably detectable flaw size for NDE methods that use calibration

NASA Astrophysics Data System (ADS)

Koshti, Ajay M.

2017-04-01

Probability of detection (POD) analysis is used in assessing reliably detectable flaw size in nondestructive evaluation (NDE). MIL-HDBK-1823 and associated mh18232 POD software gives most common methods of POD analysis. In this paper, POD analysis is applied to an NDE method, such as eddy current testing, where calibration is used. NDE calibration standards have known size artificial flaws such as electro-discharge machined (EDM) notches and flat bottom hole (FBH) reflectors which are used to set instrument sensitivity for detection of real flaws. Real flaws such as cracks and crack-like flaws are desired to be detected using these NDE methods. A reliably detectable crack size is required for safe life analysis of fracture critical parts. Therefore, it is important to correlate signal responses from real flaws with signal responses form artificial flaws used in calibration process to determine reliably detectable flaw size.

Reliably Detectable Flaw Size for NDE Methods that Use Calibration

NASA Technical Reports Server (NTRS)

Koshti, Ajay M.

2017-01-01

Probability of detection (POD) analysis is used in assessing reliably detectable flaw size in nondestructive evaluation (NDE). MIL-HDBK-1823 and associated mh1823 POD software gives most common methods of POD analysis. In this paper, POD analysis is applied to an NDE method, such as eddy current testing, where calibration is used. NDE calibration standards have known size artificial flaws such as electro-discharge machined (EDM) notches and flat bottom hole (FBH) reflectors which are used to set instrument sensitivity for detection of real flaws. Real flaws such as cracks and crack-like flaws are desired to be detected using these NDE methods. A reliably detectable crack size is required for safe life analysis of fracture critical parts. Therefore, it is important to correlate signal responses from real flaws with signal responses form artificial flaws used in calibration process to determine reliably detectable flaw size.

Setting priorities in health research using the model proposed by the World Health Organization: development of a quantitative methodology using tuberculosis in South Africa as a worked example.

PubMed

Hacking, Damian; Cleary, Susan

2016-02-09

Setting priorities is important in health research given the limited resources available for research. Various guidelines exist to assist in the priority setting process; however, priority setting still faces significant challenges such as the clear ranking of identified priorities. The World Health Organization (WHO) proposed a Disability Adjusted Life Year (DALY)-based model to rank priorities by research area (basic, health systems and biomedical) by dividing the DALYs into 'unavertable with existing interventions', 'avertable with improved efficiency' and 'avertable with existing but non-cost-effective interventions', respectively. However, the model has conceptual flaws and no clear methodology for its construction. Therefore, the aim of this paper was to amend the model to address these flaws, and develop a clear methodology by using tuberculosis in South Africa as a worked example. An amended model was constructed to represent total DALYs as the product of DALYs per person and absolute burden of disease. These figures were calculated for all countries from WHO datasets. The lowest figures achieved by any country were assumed to represent 'unavertable with existing interventions' if extrapolated to South Africa. The ratio of 'cost per patient treated' (adjusted for purchasing power and outcome weighted) between South Africa and the best country was used to calculate the 'avertable with improved efficiency section'. Finally, 'avertable with existing but non-cost-effective interventions' was calculated using Disease Control Priorities Project efficacy data, and the ratio between the best intervention and South Africa's current intervention, irrespective of cost. The amended model shows that South Africa has a tuberculosis burden of 1,009,837.3 DALYs; 0.009% of DALYs are unavertable with existing interventions and 96.3% of DALYs could be averted with improvements in efficiency. Of the remaining DALYs, a further 56.9% could be averted with existing but non-cost-effective interventions. The amended model was successfully constructed using limited data sources. The generalizability of the data used is the main limitation of the model. More complex formulas are required to deal with such potential confounding variables; however, the results act as starting point for development of a more robust model.

Evaluation of flaws in carbon steel piping. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zahoor, A.; Gamble, R.M.; Mehta, H.S.

1986-10-01

The objective of this program was to develop flaw evaluation procedures and allowable flaw sizes for ferritic piping used in light water reactor (LWR) power generation facilities. The program results provide relevant ASME Code groups with the information necessary to define flaw evaluation procedures, allowable flaw sizes, and their associated bases for Section XI of the code. Because there are several possible flaw-related failure modes for ferritic piping over the LWR operating temperature range, three analysis methods were employed to develop the evaluation procedures. These include limit load analysis for plastic collapse, elastic plastic fracture mechanics (EPFM) analysis for ductilemore » tearing, and linear elastic fracture mechanics (LEFM) analysis for non ductile crack extension. To ensure the appropriate analysis method is used in an evaluation, a step by step procedure also is provided to identify the relevant acceptance standard or procedure on a case by case basis. The tensile strength and toughness properties required to complete the flaw evaluation for any of the three analysis methods are included in the evaluation procedure. The flaw evaluation standards are provided in tabular form for the plastic collapse and ductile tearing modes, where the allowable part through flaw depth is defined as a function of load and flaw length. For non ductile crack extension, linear elastic fracture mechanics analysis methods, similar to those in Appendix A of Section XI, are defined. Evaluation flaw sizes and procedures are developed for both longitudinal and circumferential flaw orientations and normal/upset and emergency/faulted operating conditions. The tables are based on margins on load of 2.77 and 1.39 for circumferential flaws and 3.0 and 1.5 for longitudinal flaws for normal/upset and emergency/faulted conditions, respectively.« less

Modeling the X-Ray Process, and X-Ray Flaw Size Parameter for POD Studies

NASA Technical Reports Server (NTRS)

Khoshti, Ajay

2014-01-01

Nondestructive evaluation (NDE) method reliability can be determined by a statistical flaw detection study called probability of detection (POD) study. In many instances the NDE flaw detectability is given as a flaw size such as crack length. The flaw is either a crack or behaving like a crack in terms of affecting the structural integrity of the material. An alternate approach is to use a more complex flaw size parameter. The X-ray flaw size parameter, given here, takes into account many setup and geometric factors. The flaw size parameter relates to X-ray image contrast and is intended to have a monotonic correlation with the POD. Some factors such as set-up parameters including X-ray energy, exposure, detector sensitivity, and material type that are not accounted for in the flaw size parameter may be accounted for in the technique calibration and controlled to meet certain quality requirements. The proposed flaw size parameter and the computer application described here give an alternate approach to conduct the POD studies. Results of the POD study can be applied to reliably detect small flaws through better assessment of effect of interaction between various geometric parameters on the flaw detectability. Moreover, a contrast simulation algorithm for a simple part-source-detector geometry using calibration data is also provided for the POD estimation.

Modeling the X-ray Process, and X-ray Flaw Size Parameter for POD Studies

NASA Technical Reports Server (NTRS)

Koshti, Ajay M.

2014-01-01

Nondestructive evaluation (NDE) method reliability can be determined by a statistical flaw detection study called probability of detection (POD) study. In many instances, the NDE flaw detectability is given as a flaw size such as crack length. The flaw is either a crack or behaving like a crack in terms of affecting the structural integrity of the material. An alternate approach is to use a more complex flaw size parameter. The X-ray flaw size parameter, given here, takes into account many setup and geometric factors. The flaw size parameter relates to X-ray image contrast and is intended to have a monotonic correlation with the POD. Some factors such as set-up parameters, including X-ray energy, exposure, detector sensitivity, and material type that are not accounted for in the flaw size parameter may be accounted for in the technique calibration and controlled to meet certain quality requirements. The proposed flaw size parameter and the computer application described here give an alternate approach to conduct the POD studies. Results of the POD study can be applied to reliably detect small flaws through better assessment of effect of interaction between various geometric parameters on the flaw detectability. Moreover, a contrast simulation algorithm for a simple part-source-detector geometry using calibration data is also provided for the POD estimation.

The frequency of item writing flaws in multiple-choice questions used in high stakes nursing assessments.

PubMed

Tarrant, Marie; Knierim, Aimee; Hayes, Sasha K; Ware, James

2006-12-01

Multiple-choice questions are a common assessment method in nursing examinations. Few nurse educators, however, have formal preparation in constructing multiple-choice questions. Consequently, questions used in baccalaureate nursing assessments often contain item-writing flaws, or violations to accepted item-writing guidelines. In one nursing department, 2770 MCQs were collected from tests and examinations administered over a five-year period from 2001 to 2005. Questions were evaluated for 19 frequently occurring item-writing flaws, for cognitive level, for question source, and for the distribution of correct answers. Results show that almost half (46.2%) of the questions contained violations of item-writing guidelines and over 90% were written at low cognitive levels. Only a small proportion of questions were teacher generated (14.1%), while 36.2% were taken from testbanks and almost half (49.4%) had no source identified. MCQs written at a lower cognitive level were significantly more likely to contain item-writing flaws. While there was no relationship between the source of the question and item-writing flaws, teacher-generated questions were more likely to be written at higher cognitive levels (p<0.001). Correct answers were evenly distributed across all four options and no bias was noted in the placement of correct options. Further training in item-writing is recommended for all faculty members who are responsible for developing tests. Pre-test review and quality assessment is also recommended to reduce the occurrence of item-writing flaws and to improve the quality of test questions.

Moving beyond hunger and nutrition: a systematic review of the evidence linking food insecurity and mental health in developing countries.

PubMed

Weaver, Lesley Jo; Hadley, Craig

2009-01-01

Food insecurity is a significant problem in the developing world, and one that is likely to increase given the current global food crisis spurred by rising oil prices, conversion of food to biofuels, and reduced harvests in the wake of natural disasters. The impacts of food insecurity on nutrition status, growth, and development are well substantiated; less is known about the non-nutritional impacts of food insecurity, such as its effects on mental health. This systematic review assesses current findings regarding the impacts of food insecurity on mental health in developing countries. Both qualitative and quantitative studies are considered. The results of the search reveal that little work has examined these issues directly, and serious methodological flaws are present in many of the existing studies. Gaps in the literature, implications, and research priorities are discussed.

Are there meaningful differences between major depressive disorder, dysthymic disorder, and their subthreshold variants?

PubMed

Moore, Michael T; Brown, Timothy A

2012-09-01

A number of researchers have proposed adding an increasing number of subthreshold variants of major depressive disorder (MDD) as new mood disorder. However, this research has suffered from a number of theoretical and methodological flaws that the current investigation has attempted to address. Individuals with MDD (n = 470) were compared with individuals with subthreshold MDD (n = 57). Individuals with MDD reported consistently more severe symptoms, albeit of small magnitude, as well as differences in comorbidity with only two disorders. Results also indicated that diagnosis did not significantly predict rate of symptom change when MDD was compared with its subthreshold variant. Taken together, the aforementioned evidence suggests that small differences exist between MDD and its subthreshold variant. In addition, the extent to which the latter serves as useful analogs for the former may depend upon the variables under study.

Nanoparticle mediated ablation of breast cancer cells using a nanosecond pulsed electric field

NASA Astrophysics Data System (ADS)

Burford, Christopher

In the past, both nanomaterials and various heating modalities have been researched as means for treating cancers. However, many of the current methodologies have the flaws of inconsistent tumor ablation and significant destruction of healthy cells. Based on research performed using constant radiofrequency electric fields and metallic nanoparticles (where cell necrosis is induced by the heating of these nanoparticles) we have developed a modality that simlarly uses functionalized metallic nanoparticles, specific for the T47D breast cancer cell line, and nanosecond pulsed electric fields as the hyperthermic inducer. Using both iron oxide and gold nanoparticles the results of our pilot studies indicated that up to 90% of the cancer cells were ablated given the optimal treatment parameters. These quantities of ablated cells were achieved using a cumulative exposure time 6 orders of magnitude less than most in vitro radiofrequency electric field studies.

Assessment of the measurement properties of the post stroke motor function instruments available in Brazil: a systematic review.

PubMed

Lima, Elaine; Teixeira-Salmela, Luci F; Simões, Luan; Guerra, Ana C C; Lemos, Andrea

2016-03-15

While there are several instruments in Brazil that measure motor function in patients after stroke, it is unknown whether the measurement properties of these instruments are appropriate. To identify the motor function instruments available in Brazil for patients after stroke. To assess the methodological quality of the studies and the results related to the measurement properties of these instruments. Two independent reviewers conducted searches on PubMed, LILACS, CINAHL, Web of Science, and Scopus. Studies that aimed to cross-culturally adapt an existing instrument or create a Brazilian instrument and test at least one measurement property related to motor function in patients after stroke were included. The methodological quality of these studies was checked by the COSMIN checklist with 4-point rating scale and the results of the measurement properties were analyzed by the criteria developed by Terwee et al. A total of 11 instruments were considered eligible, none of which were created in Brazil. The process of cross-cultural adaptation was inadequate in 10 out of 11 instruments due to the lack of back-translation or due to inappropriate target population. All of the instruments presented flaws in the measurement properties, especially reliability, internal consistency, and construct validity. The flaws observed in both cross-cultural adaptation process and testing measurement properties make the results inconclusive on the validity of the available instruments. Adequate procedures of cross-cultural adaptation and measurement properties of these instruments are strongly needed.

Assessment of the measurement properties of the post stroke motor function instruments available in Brazil: a systematic review

PubMed Central

Lima, Elaine; Teixeira-Salmela, Luci F.; Simões, Luan; Guerra, Ana C. C.; Lemos, Andrea

2016-01-01

Background While there are several instruments in Brazil that measure motor function in patients after stroke, it is unknown whether the measurement properties of these instruments are appropriate. Objective To identify the motor function instruments available in Brazil for patients after stroke. To assess the methodological quality of the studies and the results related to the measurement properties of these instruments. Method Two independent reviewers conducted searches on PubMed, LILACS, CINAHL, Web of Science, and Scopus. Studies that aimed to cross-culturally adapt an existing instrument or create a Brazilian instrument and test at least one measurement property related to motor function in patients after stroke were included. The methodological quality of these studies was checked by the COSMIN checklist with 4-point rating scale and the results of the measurement properties were analyzed by the criteria developed by Terwee et al. Results A total of 11 instruments were considered eligible, none of which were created in Brazil. The process of cross-cultural adaptation was inadequate in 10 out of 11 instruments due to the lack of back-translation or due to inappropriate target population. All of the instruments presented flaws in the measurement properties, especially reliability, internal consistency, and construct validity. Conclusion The flaws observed in both cross-cultural adaptation process and testing measurement properties make the results inconclusive on the validity of the available instruments. Adequate procedures of cross-cultural adaptation and measurement properties of these instruments are strongly needed. PMID:26982452

Tooth wear and erosion: methodological issues in epidemiological and public health research and the future research agenda.

PubMed

Ganss, C; Young, A; Lussi, A

2011-09-01

This paper addresses methodological issues in the field of tooth wear and erosion research including the epidemiological indices, and identifies future work that is needed to improve knowledge about tooth wear and erosion. The paper is result of the work done at the meetings of the Special Interest Group "Tooth Surface Loss and Erosion" at the 2008, 2009 and 2010 conferences of the European Association for Dental Public Health, and the Workshop "Current Erosion indices- flawed or valid" which took place in Basel in 2007. Although there is consensus about the definition and the diagnostic criteria of various forms of tooth wear, gaps in research strategies have been identified. A basic problem is that fundamental concepts of wear and erosion as an oral health problem, have not yet been sufficiently defined. To a certain extent, tooth wear is a physiological condition, and there is no consensus as to whether it can be regarded as a disease. Furthermore, the multitude of indices and flaws in existing indices, make published data difficult to interpret. Topics for the research agenda are: the initiation of a consensus process towards an internationally accepted index, and the initiation of data collection on the prevalence of various forms of wear on a population-based level. There should be an emphasis on promoting communication between basic and clinical sciences, and the area of Public Health Dentistry. Furthermore, the question of whether tooth wear is a public health problem remains open for debate.

Six ways not to improve patient flow: a qualitative study.

PubMed

Kreindler, Sara Adi

2017-05-01

Although well-established principles exist for improving the timeliness and efficiency of care, many organisations struggle to achieve more than small-scale, localised gains. Where care processes are complex and include segments under different groups' control, the elegant solutions promised by improvement methodologies remain elusive. This study sought to identify common design flaws that limit the impact of flow initiatives. This qualitative study was conducted within an explanatory case study of a Canadian regional health system in which multitudinous flow initiatives had yielded no overall improvement in system performance. Interviews with 62 senior, middle and departmental managers, supplemented by ∼700 documents on flow initiatives, were analysed using the constant comparative method. Findings suggested that smooth flow depends on linking a defined population to appropriate capacity by means of an efficient process ; flawed initiatives reflected failure to consider one or more of these essential elements. Many initiatives focused narrowly on process, failing to consider that the intended population was poorly defined or the needed capacity inaccessible; some introduced capacity for an intended population, but offered no process to link the two. Moreover, interveners were unable to respond effectively when a bottleneck moved to another part of the system. Errors of population, capacity and process, in different combinations, generated six 'formulae for failure'. Typically, flawed initiatives focused on too small a segment of the patient journey to properly address the impediments to flow. The proliferation of narrowly focused initiatives, in turn, reflected a decentralised system in which responsibility for flow improvement was fragmented. Thus, initiatives' specific design flaws may have their roots in a deeper problem: the lack of a coherent system-level strategy. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Flaw depth sizing using guided waves

NASA Astrophysics Data System (ADS)

Cobb, Adam C.; Fisher, Jay L.

2016-02-01

Guided wave inspection technology is most often applied as a survey tool for pipeline inspection, where relatively low frequency ultrasonic waves, compared to those used in conventional ultrasonic nondestructive evaluation (NDE) methods, propagate along the structure; discontinuities cause a reflection of the sound back to the sensor for flaw detection. Although the technology can be used to accurately locate a flaw over long distances, the flaw sizing performance, especially for flaw depth estimation, is much poorer than other, local NDE approaches. Estimating flaw depth, as opposed to other parameters, is of particular interest for failure analysis of many structures. At present, most guided wave technologies estimate the size of the flaw based on the reflected signal amplitude from the flaw compared to a known geometry reflection, such as a circumferential weld in a pipeline. This process, however, requires many assumptions to be made, such as weld geometry and flaw shape. Furthermore, it is highly dependent on the amplitude of the flaw reflection, which can vary based on many factors, such as attenuation and sensor installation. To improve sizing performance, especially depth estimation, and do so in a way that is not strictly amplitude dependent, this paper describes an approach to estimate the depth of a flaw based on a multimodal analysis. This approach eliminates the need of using geometric reflections for calibration and can be used for both pipeline and plate inspection applications. To verify the approach, a test set was manufactured on plate specimens with flaws of different widths and depths ranging from 5% to 100% of total wall thickness; 90% of these flaws were sized to within 15% of their true value. A description of the initial multimodal sizing strategy and results will be discussed.

Crack propagation and coalescence due to dual non-penetrating surface flaws and their effect on the strength of rock-like material

NASA Astrophysics Data System (ADS)

Xu, Jun; Zheng, Zheyuan; Xiao, Xiaochun; Li, Zhaoxia

2018-06-01

Non-penetrating surface flaws play a key role in the fracture process of rock-like material, and could cause localized collapse and even failure of the materials. Until now, the mechanism and the effect of surface crack propagation have remained unclear. In this paper, compression tests on gypsum (a soft rock material) are conducted to investigate crack propagation and coalescence due to non-penetrating surface flaws and their effect on the material strength. Specimens are tested under dual pre-existing surface flaws with various combinations of depth and spacing. The results show that when the pre-existing flaws are non-penetrating, the d/t ratio (flaw depth ratio, d is the pre-existing flaw cutting depth and t is the specimen thickness) and the spacing (the distance between the two flaw internal tips) have a strong influence on surface crack patterns and specimen strength. Few cracks emanate from the pre-existing flaws when the flaw depth ratio is equal to 1/3, and more cracks occur with the increase of the flaw depth ratio. When the pre-existing flaw penetrates completely through the specimen, the spacing has a small effect on the specimen strength. A larger flaw depth ratio could advance the occurrence of the peak load (PL) and result in a smaller specimen residual strength. The failure process of the specimen is divided into several stages featured by a stepped decline of the load value after PL, which is closely related to the initiation and propagation of secondary cracks. In addition, the spalling (failure of a portion of the surface caused by coalescence of cracks) can be regarded as indicating the failure of the specimen, and two possible types of spalling formation are briefly discussed.

Analysis of Eddy Current Capabilities for the Detection of Outer Diameter Stress Corrosion Cracking in Small Bore Metallic Structures

NASA Technical Reports Server (NTRS)

Wincheski, Buzz; Williams, Phillip; Simpson, John

2007-01-01

The use of eddy current techniques for the detection of outer diameter damage in tubing and many complex aerospace structures often requires the use of an inner diameter probe due to a lack of access to the outside of the part. In small bore structures the probe size and orientation are constrained by the inner diameter of the part, complicating the optimization of the inspection technique. Detection of flaws through a significant remaining wall thickness becomes limited not only by the standard depth of penetration, but also geometrical aspects of the probe. Recently, an orthogonal eddy current probe was developed for detection of such flaws in Space Shuttle Primary Reaction Control System (PRCS) Thrusters. In this case, the detection of deeply buried stress corrosion cracking by an inner diameter eddy current probe was sought. Probe optimization was performed based upon the limiting spatial dimensions, flaw orientation, and required detection sensitivity. Analysis of the probe/flaw interaction was performed through the use of finite and boundary element modeling techniques. Experimental data for the flaw detection capabilities, including a probability of detection study, will be presented along with the simulation data. The results of this work have led to the successful deployment of an inspection system for the detection of stress corrosion cracking in Space Shuttle Primary Reaction Control System (PRCS) Thrusters.

On the methodological, theoretical and philosophical context of health inequalities research: a critique.

PubMed

Forbes, A; Wainwright, S P

2001-09-01

The integration of survey data with psycho-social theories is an important and emerging theme within the field of health inequalities research. This paper critically examines this approach arguing that the respective models of health inequality which these approaches promote, the related concepts of 'social cohesion' and 'social capital' suffer from serious methodological, theoretical and philosophical flaws. The critique draws particular attention to the limitations of survey-derived data and the dangers of using such data to develop complex social explanations for health inequalities. The paper discusses wider epistemological issues which emerge from the critique addressing the fundamental but neglected question of 'what is inequality'? The paper concludes by introducing a structure for questions regarding health inequalities emphasising the need for those question to be attached to real communities.

Development of Natural Flaw Samples for Evaluating Nondestructive Testing Methods for Foam Thermal Protection Systems

NASA Technical Reports Server (NTRS)

Workman, Gary L.; Davis, Jason; Farrington, Seth; Walker, James

2007-01-01

Low density polyurethane foam has been an important insulation material for space launch vehicles for several decades. The potential for damage from foam breaking away from the NASA External Tank was not realized until the foam impacts on the Columbia Orbiter vehicle caused damage to its Leading Edge thermal protection systems (TPS). Development of improved inspection techniques on the foam TPS is necessary to prevent similar occurrences in the future. Foamed panels with drilled holes for volumetric flaws and Teflon inserts to simulate debonded conditions have been used to evaluate and calibrate nondestructive testing (NDT) methods. Unfortunately the symmetric edges and dissimilar materials used in the preparation of these simulated flaws provide an artificially large signal while very little signal is generated from the actual defects themselves. In other words, the same signal are not generated from the artificial defects in the foam test panels as produced when inspecting natural defect in the ET foam TPS. A project to create more realistic voids similar to what actually occurs during manufacturing operations was began in order to improve detection of critical voids during inspections. This presentation describes approaches taken to create more natural voids in foam TPS in order to provide a more realistic evaluation of what the NDT methods can detect. These flaw creation techniques were developed with both sprayed foam and poured foam used for insulation on the External Tank. Test panels with simulated defects have been used to evaluate NDT methods for the inspection of the External Tank. A comparison of images between natural flaws and machined flaws generated from backscatter x-ray radiography, x-ray laminography, terahertz imaging and millimeter wave imaging show significant differences in identifying defect regions.

Use and misuse of research in books on sex trafficking: implications for interdisciplinary researchers, practitioners, and advocates.

PubMed

Fedina, Lisa

2015-04-01

Recent articles have raised important questions about the validity of prevalence data on human trafficking, exposing flawed methodologies behind frequently cited statistics. While considerable evidence points to the fact that human trafficking does exist in the United States and abroad, many sources of literature continue to cite flawed data and some misuse research in ways that seemingly inflate the problem, which can have serious implications for anti-trafficking efforts, including victim services and anti-trafficking legislation and policy. This systematic review reports on the prevalence data used in 42 recently published books on sex trafficking to determine the extent to which published books rely on data estimates and just how they use or misuse existing data. The findings from this review reveal that the vast majority of published books do rely on existing data that were not rigorously produced and therefore may be misleading or at minimum, inaccurate. Implications for practice, research, and policy are discussed, as well as recommendations for future prevalence studies on human trafficking. © The Author(s) 2014.

Abusive head trauma and the triad: a critique on behalf of RCPCH of 'Traumatic shaking: the role of the triad in medical investigations of suspected traumatic shaking'.

PubMed

Debelle, Geoffrey David; Maguire, Sabine; Watts, Patrick; Nieto Hernandez, Rosa; Kemp, Alison Mary

2018-06-01

The Swedish Agency for Health Technology Assessment and Assessment of Social Services (SBU) has recently published what they purported to be a systematic review of the literature on 'isolated traumatic shaking' in infants, concluding that 'there is limited evidence that the so-called triad (encephalopathy, subdural haemorrhage, retinal haemorrhage) and therefore its components can be associated with traumatic shaking'. This flawed report, from a national body, demands a robust response. The conclusions of the original report have the potential to undermine medico-legal practice. We have conducted a critique of the methodology used in the SBU review and have found it to be flawed, to the extent that children's lives may be put at risk. Thus, we call on this review to be withdrawn or to be subjected to international scrutiny. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Methodological quality of systematic reviews analyzing the use of laser therapy in restorative dentistry.

PubMed

Salmos, Janaina; Gerbi, Marleny E M M; Braz, Rodivan; Andrade, Emanuel S S; Vasconcelos, Belmiro C E; Bessa-Nogueira, Ricardo V

2010-01-01

The purpose of this study was to identify systematic reviews (SRs) that compared laser with other dental restorative procedures and to evaluate their methodological quality. A search strategy was developed and implemented for MEDLINE, the Cochrane Library, LILACS, and the Brazilian Dentistry Bibliography (1966- 2007). Inclusion criteria were: the article had to be an SR (+/- meta-analysis); primary focus was the use of laser in restorative dentistry; published in English, Spanish, Portuguese, Italian, German. Two investigators independently selected and evaluated the SRs. The overview quality assessment questionnaire (OQAQ) was used to evaluate methodological quality, and the results were averaged. There were 145 references identified, of which seven were SRs that met the inclusion criteria (kappa=0.81). Of the SRs, 71.4% appraised lasers in dental caries diagnosis. The mean overall OQAQ score was 4.4 [95% confidence interval (CI) 2.4- 6.5]. Of the SRs, 57.1% had major flaws, scoring < or = 4. SR methodological quality is low; therefore, clinicians should critically appraise them prior to considering their recommendations to guide patient care.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, C.; Burnett, M.; Goodman, C.

A survey of currency flaw severity was carried out using 300 banknotes and 37 judges. Each judge assigned each note to one of five flaw severity categories. These categories correspond to severity grades of 1 to 5 with 1 equivalent to ''always accepted'' and 5 ''never accepted.'' An average flaw severity grade for each note was obtained by taking the mean of the severity grades assigned to that note by the 37 judges. Thus, each note has a single numerical real-number flaw grade between 1 and 5. Mathematical modeling of the currency flaw survey results is continuing with some verymore » promising initial results. Our present model handles common excess ink and missing ink flaw types quite well. We plan to extend the model to ink level, mash, setoff and blanket impression flaw types.« less

Laser displacement sensor to monitor the layup process of composite laminate production

NASA Astrophysics Data System (ADS)

Miesen, Nick; Groves, Roger M.; Sinke, Jos; Benedictus, Rinze

2013-04-01

Several types of flaw can occur during the layup process of prepreg composite laminates. Quality control after the production process checks the end product by testing the specimens for flaws which are included during the layup process or curing process, however by then these flaws are already irreversibly embedded in the laminate. This paper demonstrates the use of a laser displacement sensor technique applied during the layup process of prepreg laminates for in-situ flaw detection, for typical flaws that can occur during the composite production process. An incorrect number of layers and fibre wrinkling are dominant flaws during the process of layup. These and other dominant flaws have been modeled to determine the requirements for an in-situ monitoring during the layup process of prepreg laminates.

Avoiding false discoveries in association studies.

PubMed

Sabatti, Chiara

2007-01-01

We consider the problem of controlling false discoveries in association studies. We assume that the design of the study is adequate so that the "false discoveries" are potentially only because of random chance, not to confounding or other flaws. Under this premise, we review the statistical framework for hypothesis testing and correction for multiple comparisons. We consider in detail the currently accepted strategies in linkage analysis. We then examine the underlying similarities and differences between linkage and association studies and document some of the most recent methodological developments for association mapping.

Damage assessment in multilayered MEMS structures under thermal fatigue

NASA Astrophysics Data System (ADS)

Maligno, A. R.; Whalley, D. C.; Silberschmidt, V. V.

2011-07-01

This paper reports on the application of a Physics of Failure (PoF) methodology to assessing the reliability of a micro electro mechanical system (MEMS). Numerical simulations, based on the finite element method (FEM) using a sub-domain approach was used to examine the damage onset due to temperature variations (e.g. yielding of metals which may lead to thermal fatigue). In this work remeshing techniques were employed in order to develop a damage tolerance approach based on the assumption that initial flaws exist in the multi-layered.

An electrical conductivity inspection methodology of polycrystalline diamond cutters

NASA Astrophysics Data System (ADS)

Bogdanov, G.; Wiggins, J.; Bertagnolli, K.; Ludwig, R.

2012-05-01

The polycrystalline diamond cutter (PDC) is widely used in oil and gas drilling operations. It is manufactured by sintering diamond powder onto a tungsten carbide substrate at 6 GPa and 1500 C. During sintering, molten cobalt from the substrate infiltrates the diamond table. The residual metal content correlates with cutter performance. We present an instrument that employs electrical impedance tomography capable of imaging the 3D metal content distribution in the diamond table. These images can be used to predict cutter performance as well as detect flaws.

Procedure for flaw detection in cast stainless steel

DOEpatents

Kupperman, David S.

1988-01-01

A method of ultrasonic flaw detection in cast stainless steel components incorporating the steps of determining the nature of the microstructure of the cast stainless steel at the site of the flaw detection measurements by ultrasonic elements independent of the component thickness at the site; choosing from a plurality of flaw detection techniques, one such technique appropriate to the nature of the microstructure as determined and detecting flaws by use of the chosen technique.

A systematic review of the quality of homeopathic pathogenetic trials published from 1945 to 1995.

PubMed

Dantas, F; Fisher, P; Walach, H; Wieland, F; Rastogi, D P; Teixeira, H; Koster, D; Jansen, J P; Eizayaga, J; Alvarez, M E P; Marim, M; Belon, P; Weckx, L L M

2007-01-01

The quality of information gathered from homeopathic pathogenetic trials (HPTs), also known as 'provings', is fundamental to homeopathy. We systematically reviewed HPTs published in six languages (English, German, Spanish, French, Portuguese and Dutch) from 1945 to 1995, to assess their quality in terms of the validity of the information they provide. The literature was comprehensively searched, only published reports of HPTs were included. Information was extracted by two reviewers per trial using a form with 87 items. Information on: medicines, volunteers, ethical aspects, blinding, randomization, use of placebo, adverse effects, assessments, presentation of data and number of claimed findings were recorded. Methodological quality was assessed by an index including indicators of internal and external validity, personal judgement and comments of reviewers for each study. 156 HPTs on 143 medicines, involving 2815 volunteers, produced 20,538 pathogenetic effects (median 6.5 per volunteer). There was wide variation in methods and results. Sample size (median 15, range 1-103) and trial duration (mean 34 days) were very variable. Most studies had design flaws, particularly absence of proper randomization, blinding, placebo control and criteria for analysis of outcomes. Mean methodological score was 5.6 (range 4-16). More symptoms were reported from HPTs of poor quality than from better ones. In 56% of trials volunteers took placebo. Pathogenetic effects were claimed in 98% of publications. On average about 84% of volunteers receiving active treatment developed symptoms. The quality of reports was in general poor, and much important information was not available. The HPTs were generally of low methodological quality. There is a high incidence of pathogenetic effects in publications and volunteers but this could be attributable to design flaws. Homeopathic medicines, tested in HPTs, appear safe. The central question of whether homeopathic medicines in high dilutions can provoke effects in healthy volunteers has not yet been definitively answered, because of methodological weaknesses of the reports. Improvement of the method and reporting of results of HPTs are required. References to all included RCTs are available on-line at.

Assessing species saturation: conceptual and methodological challenges.

PubMed

Olivares, Ingrid; Karger, Dirk N; Kessler, Michael

2018-05-07

Is there a maximum number of species that can coexist? Intuitively, we assume an upper limit to the number of species in a given assemblage, or that a lineage can produce, but defining and testing this limit has proven problematic. Herein, we first outline seven general challenges of studies on species saturation, most of which are independent of the actual method used to assess saturation. Among these are the challenge of defining saturation conceptually and operationally, the importance of setting an appropriate referential system, and the need to discriminate among patterns, processes and mechanisms. Second, we list and discuss the methodological approaches that have been used to study species saturation. These approaches vary in time and spatial scales, and in the variables and assumptions needed to assess saturation. We argue that assessing species saturation is possible, but that many studies conducted to date have conceptual and methodological flaws that prevent us from currently attaining a good idea of the occurrence of species saturation. © 2018 Cambridge Philosophical Society.

Exercise redox biochemistry: Conceptual, methodological and technical recommendations.

PubMed

Cobley, James N; Close, Graeme L; Bailey, Damian M; Davison, Gareth W

2017-08-01

Exercise redox biochemistry is of considerable interest owing to its translational value in health and disease. However, unaddressed conceptual, methodological and technical issues complicate attempts to unravel how exercise alters redox homeostasis in health and disease. Conceptual issues relate to misunderstandings that arise when the chemical heterogeneity of redox biology is disregarded: which often complicates attempts to use redox-active compounds and assess redox signalling. Further, that oxidised macromolecule adduct levels reflect formation and repair is seldom considered. Methodological and technical issues relate to the use of out-dated assays and/or inappropriate sample preparation techniques that confound biochemical redox analysis. After considering each of the aforementioned issues, we outline how each issue can be resolved and provide a unifying set of recommendations. We specifically recommend that investigators: consider chemical heterogeneity, use redox-active compounds judiciously, abandon flawed assays, carefully prepare samples and assay buffers, consider repair/metabolism, use multiple biomarkers to assess oxidative damage and redox signalling. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Grist to the Mill of Anti-evolutionism: The Failed Strategy of Ruling the Supernatural Out of Science by Philosophical Fiat

NASA Astrophysics Data System (ADS)

Boudry, Maarten; Blancke, Stefaan; Braeckman, Johan

2012-08-01

According to a widespread philosophical opinion, science is strictly limited to investigating natural causes and putting forth natural explanations. Lacking the tools to evaluate supernatural claims, science must remain studiously neutral on questions of metaphysics. This (self-imposed) stricture, which goes under the name of `methodological naturalism', allows science to be divorced from metaphysical naturalism or atheism, which many people tend to associate with it. However, ruling the supernatural out of science by fiat is not only philosophically untenable, it actually provides grist to the mill of anti-evolutionism. The philosophical flaws in this conception of methodological naturalism have been gratefully exploited by advocates of intelligent design creationism to bolster their false accusations of naturalistic bias and dogmatism on the part of modern science. We argue that it promotes a misleading view of the scientific endeavor and is at odds with the foremost arguments for evolution by natural selection. Reconciling science and religion on the basis of such methodological strictures is therefore misguided.

C-Sphere Strength-Size Scaling in a Bearing-Grade Silicon Nitride

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wereszczak, Andrew A; Jadaan, Osama M.; Kirkland, Timothy Philip

2008-01-01

A C-sphere specimen geometry was used to determine the failure strength distributions of a commercially available bearing-grade silicon nitride (Si3N4) having ball diameters of 12.7 and 25.4 mm. Strengths for both diameters were determined using the combination of failure load, C sphere geometry, and finite element analysis and fitted using two-parameter Weibull distributions. Effective areas of both diameters were estimated as a function of Weibull modulus and used to explore whether the strength distributions predictably strength-scaled between each size. They did not. That statistical observation suggested that the same flaw type did not limit the strength of both ball diametersmore » indicating a lack of material homogeneity between the two sizes. Optical fractography confirmed that. It showed there were two distinct strength-limiting flaw types in both ball diameters, that one flaw type was always associated with lower strength specimens, and that significantly higher fraction of the 24.5-mm-diameter c-sphere specimens failed from it. Predictable strength-size-scaling would therefore not result as a consequence of this because these flaw types were not homogenously distributed and sampled in both c-sphere geometries.« less

Apparatus and method for detecting flaws in conductive material

DOEpatents

Hockey, Ronald L.; Riechers, Douglas M.

1999-01-01

The present invention is an improved sensing unit for detecting flaws in conductive material wherein the sensing coil is positioned away from a datum of either the datum point, the datum orientation, or a combination thereof. Position of the sensing coil away from a datum increases sensitivity for detecting flaws having a characteristic volume less than about 1 mm.sup.3, and further permits detection of subsurface flaws. Use of multiple sensing coils permits quantification of flaw area or volume.

Will current probabilistic climate change information, as such, improve adaptation?

NASA Astrophysics Data System (ADS)

Lopez, A.; Smith, L. A.

2012-04-01

Probabilistic climate scenarios are currently being provided to end users, to employ as probabilities in adaptation decision making, with the explicit suggestion that they quantify the impacts of climate change relevant to a variety of sectors. These "probabilities" are, however, rather sensitive to the assumptions in, and the structure of the modelling approaches used to generate them. It is often argued that stakeholders require probabilistic climate change information to adequately evaluate and plan adaptation pathways. On the other hand, some circumstantial evidence suggests that on the ground decision making rarely uses well defined probability distributions of climate change as inputs. Nevertheless it is within this context of probability distributions of climate change that we discuss possible drawbacks of supplying information that, while presented as robust and decision relevant, , is in fact unlikely to be so due to known flaws both in the underlying models and in the methodology used to "account for" those known flaws. How might one use a probability forecast that is expected to change in the future, not due to a refinement in our information but due to fundamental flaws in its construction? What then are the alternatives? While the answer will depend on the context of the problem at hand, a good approach will be strongly informed by the timescale of the given planning decision, and the consideration of all the non-climatic factors that have to be taken into account in the corresponding risk assessment. Using a water resources system as an example, we illustrate an alternative approach to deal with these challenges and make robust adaptation decisions today.

Documentation of probabilistic fracture mechanics codes used for reactor pressure vessels subjected to pressurized thermal shock loading: Parts 1 and 2. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balkey, K.; Witt, F.J.; Bishop, B.A.

1995-06-01

Significant attention has been focused on the issue of reactor vessel pressurized thermal shock (PTS) for many years. Pressurized thermal shock transient events are characterized by a rapid cooldown at potentially high pressure levels that could lead to a reactor vessel integrity concern for some pressurized water reactors. As a result of regulatory and industry efforts in the early 1980`s, a probabilistic risk assessment methodology has been established to address this concern. Probabilistic fracture mechanics analyses are performed as part of this methodology to determine conditional probability of significant flaw extension for given pressurized thermal shock events. While recent industrymore » efforts are underway to benchmark probabilistic fracture mechanics computer codes that are currently used by the nuclear industry, Part I of this report describes the comparison of two independent computer codes used at the time of the development of the original U.S. Nuclear Regulatory Commission (NRC) pressurized thermal shock rule. The work that was originally performed in 1982 and 1983 to compare the U.S. NRC - VISA and Westinghouse (W) - PFM computer codes has been documented and is provided in Part I of this report. Part II of this report describes the results of more recent industry efforts to benchmark PFM computer codes used by the nuclear industry. This study was conducted as part of the USNRC-EPRI Coordinated Research Program for reviewing the technical basis for pressurized thermal shock (PTS) analyses of the reactor pressure vessel. The work focused on the probabilistic fracture mechanics (PFM) analysis codes and methods used to perform the PTS calculations. An in-depth review of the methodologies was performed to verify the accuracy and adequacy of the various different codes. The review was structured around a series of benchmark sample problems to provide a specific context for discussion and examination of the fracture mechanics methodology.« less

Methodology in diagnostic laboratory test research in clinical chemistry and clinical chemistry and laboratory medicine.

PubMed

Lumbreras-Lacarra, Blanca; Ramos-Rincón, José Manuel; Hernández-Aguado, Ildefonso

2004-03-01

The application of epidemiologic principles to clinical diagnosis has been less developed than in other clinical areas. Knowledge of the main flaws affecting diagnostic laboratory test research is the first step for improving its quality. We assessed the methodologic aspects of articles on laboratory tests. We included articles that estimated indexes of diagnostic accuracy (sensitivity and specificity) and were published in Clinical Chemistry or Clinical Chemistry and Laboratory Medicine in 1996, 2001, and 2002. Clinical Chemistry has paid special attention to this field of research since 1996 by publishing recommendations, checklists, and reviews. Articles were identified through electronic searches in Medline. The strategy combined the Mesh term "sensitivity and specificity" (exploded) with the text words "specificity", "false negative", and "accuracy". We examined adherence to seven methodologic criteria used in the study by Reid et al. (JAMA1995;274:645-51) of papers published in general medical journals. Three observers evaluated each article independently. Seventy-nine articles fulfilled the inclusion criteria. The percentage of studies that satisfied each criterion improved from 1996 to 2002. Substantial improvement was observed in reporting of the statistical uncertainty of indices of diagnostic accuracy, in criteria based on clinical information from the study population (spectrum composition), and in avoidance of workup bias. Analytical reproducibility was reported frequently (68%), whereas information about indeterminate results was rarely provided. The mean number of methodologic criteria satisfied showed a statistically significant increase over the 3 years in Clinical Chemistry but not in Clinical Chemistry and Laboratory Medicine. The methodologic quality of the articles on diagnostic test research published in Clinical Chemistry and Clinical Chemistry and Laboratory Medicine is comparable to the quality observed in the best general medical journals. The methodologic aspects that most need improvement are those linked to the clinical information of the populations studied. Editorial actions aimed to increase the quality of reporting of diagnostic studies could have a relevant positive effect, as shown by the improvement observed in Clinical Chemistry.

Digital ultrasonics signal processing: Flaw data post processing use and description

NASA Technical Reports Server (NTRS)

Buel, V. E.

1981-01-01

A modular system composed of two sets of tasks which interprets the flaw data and allows compensation of the data due to transducer characteristics is described. The hardware configuration consists of two main units. A DEC LSI-11 processor running under the RT-11 sngle job, version 2C-02 operating system, controls the scanner hardware and the ultrasonic unit. A DEC PDP-11/45 processor also running under the RT-11, version 2C-02, operating system, stores, processes and displays the flaw data. The software developed the Ultrasonics Evaluation System, is divided into two catagories; transducer characterization and flaw classification. Each category is divided further into two functional tasks: a data acquisition and a postprocessor ask. The flaw characterization collects data, compresses its, and writes it to a disk file. The data is then processed by the flaw classification postprocessing task. The use and operation of a flaw data postprocessor is described.

Identification of technical item flaws leads to improvement of the quality of single best Multiple Choice Questions.

PubMed

Fayyaz Khan, Humaira; Farooq Danish, Khalid; Saeed Awan, Azra; Anwar, Masood

2013-05-01

The purpose of the study was to identify technical item flaws in the multiple choice questions submitted for the final exams for the years 2009, 2010 and 2011. This descriptive analytical study was carried out in Islamic International Medical College (IIMC). The Data was collected from the MCQ's submitted by the faculty for the final exams for the year 2009, 2010 and 2011. The data was compiled and evaluated by a three member assessment committee. The data was analyzed for frequency and percentages the categorical data was analyzed by chi-square test. Overall percentage of flawed item was 67% for the year 2009 of which 21% were for testwiseness and 40% were for irrelevant difficulty. In year 2010 the total item flaws were 36% and 11% testwiseness and 22% were for irrelevant difficulty. The year 2011 data showed decreased overall flaws of 21%. The flaws of testwisness were 7%, irrelevant difficulty were 11%. Technical item flaws are frequently encountered during MCQ construction, and the identification of flaws leads to improved quality of the single best MCQ's.

Markov state models of protein misfolding

NASA Astrophysics Data System (ADS)

Sirur, Anshul; De Sancho, David; Best, Robert B.

2016-02-01

Markov state models (MSMs) are an extremely useful tool for understanding the conformational dynamics of macromolecules and for analyzing MD simulations in a quantitative fashion. They have been extensively used for peptide and protein folding, for small molecule binding, and for the study of native ensemble dynamics. Here, we adapt the MSM methodology to gain insight into the dynamics of misfolded states. To overcome possible flaws in root-mean-square deviation (RMSD)-based metrics, we introduce a novel discretization approach, based on coarse-grained contact maps. In addition, we extend the MSM methodology to include "sink" states in order to account for the irreversibility (on simulation time scales) of processes like protein misfolding. We apply this method to analyze the mechanism of misfolding of tandem repeats of titin domains, and how it is influenced by confinement in a chaperonin-like cavity.

Intimate relationship quality, self-concept and illness acceptance in those with multiple sclerosis.

PubMed

Wright, Thomas M; Kiropoulos, Litza A

2017-02-01

Lower levels of Intimate Relationship Quality (IRQ) have been found in those with Multiple Sclerosis (MS) compared to the general population. This study examined an MS sample to see whether IRQ was positively associated with self-concept, whether IRQ was positively associated with MS illness acceptance and whether IRQ was predicted by self-concept and illness acceptance. In this cross-sectional study, 115 participants with MS who were in an intimate relationship completed an online survey advertised on MS related websites. The survey assessed demographic variables, MS illness variables and levels of IRQ, self-concept and illness acceptance. Results revealed that IRQ was significantly positively associated with self-concept and with illness acceptance. Multiple hierarchical linear regression analysis revealed that, after controlling for illness duration and level of disability, self-concept significantly predicted IRQ but illness acceptance did not significantly predict IRQ. This study addressed several gaps and methodological flaws in the literature and was the first known to assess predictors of IRQ in those with MS. The results suggest that self-concept could be a potential target for individual and couple psychological interventions to improve IRQ and contribute to improved outcomes for those with MS.

Research and Development of Automated Eddy Current Testing for Composite Overwrapped Pressure Vessels

NASA Technical Reports Server (NTRS)

Carver, Kyle L.; Saulsberry, Regor L.; Nichols, Charles T.; Spencer, Paul R.; Lucero, Ralph E.

2012-01-01

Eddy current testing (ET) was used to scan bare metallic liners used in the fabrication of composite overwrapped pressure vessels (COPVs) for flaws which could result in premature failure of the vessel. The main goal of the project was to make improvements in the areas of scan signal to noise ratio, sensitivity of flaw detection, and estimation of flaw dimensions. Scan settings were optimized resulting in an increased signal to noise ratio. Previously undiscovered flaw indications were observed and investigated. Threshold criteria were determined for the system software's flaw report and estimation of flaw dimensions were brought to an acceptable level of accuracy. Computer algorithms were written to import data for filtering and a numerical derivative filtering algorithm was evaluated.

Systematic review and quality assessment of cost-effectiveness analysis of pharmaceutical therapies for advanced colorectal cancer.

PubMed

Leung, Henry W C; Chan, Agnes L F; Leung, Matthew S H; Lu, Chin-Li

2013-04-01

To systematically review and assess the quality of cost-effectiveness analyses (CEAs) of pharmaceutical therapies for metastatic colorectal cancer (mCRC). The MEDLINE, EMBASE, Cochrane, and EconLit databases were searched for the Medical Subject Headings or text key words quality-adjusted, QALY, life-year gained (LYG), and cost-effectiveness (January 1, 1999-December 31, 2009). Original CEAs of mCRC pharmacotherapy published in English were included. CEAs that measured health effects in units other than quality-adjusted life years or LYG and letters to the editor, case reports, posters, and editorials were excluded. Each article was independently assessed by 2 trained reviewers according to a quality checklist created by the Panel on Cost-Effectiveness in Health and Medicine. Twenty-four CEA studies pertaining to pharmaceutical therapies for mCRC were identified. All studies showed a wide variation in methodologic approaches, which resulted in a different range of incremental cost-effectiveness ratios reported for each regimen. We found common methodologic flaws in a significant number of CEA studies, including lack of clear description for critique of data quality; lack of method for adjusting costs for inflation and methods for obtaining expert judgment; no results of model validation; wide differences in the types of perspective, time horizon, study design, cost categories, and effect outcomes; and no quality assessment of data (cost and effectiveness) for the interventions evaluation. This study has shown a wide variation in the methodology and quality of cost-effectiveness analysis for mCRC. Improving quality and harmonization of CEA for cancer treatment is needed. Further study is suggested to assess the quality of CEA methodology outside the mCRC disease state.

Usability flaws of medication-related alerting functions: A systematic qualitative review.

PubMed

Marcilly, Romaric; Ammenwerth, Elske; Vasseur, Francis; Roehrer, Erin; Beuscart-Zéphir, Marie-Catherine

2015-06-01

Medication-related alerting functions may include usability flaws that limit their optimal use. A first step on the way to preventing usability flaws is to understand the characteristics of these usability flaws. This systematic qualitative review aims to analyze the type of usability flaws found in medication-related alerting functions. Papers were searched via PubMed, Scopus and Ergonomics Abstracts databases, along with references lists. Paper selection, data extraction and data analysis was performed by two to three Human Factors experts. Meaningful semantic units representing instances of usability flaws were the main data extracted. They were analyzed through qualitative methods: categorization following general usability heuristics and through an inductive process for the flaws specific to medication-related alerting functions. From the 6380 papers initially identified, 26 met all eligibility criteria. The analysis of the papers identified a total of 168 instances of usability flaws that could be classified into 13 categories of usability flaws representing either violations of general usability principles (i.e. they could be found in any system, e.g. guidance and workload issues) or infractions specific to medication-related alerting functions. The latter refer to issues of low signal-to-noise ratio, incomplete content of alerts, transparency, presentation mode and timing, missing alert features, tasks and control distribution. The list of 168 instances of usability flaws of medication-related alerting functions provides a source of knowledge for checking the usability of medication-related alerting functions during their design and evaluation process and ultimately constructs evidence-based usability design principles for these functions. Copyright © 2015 Elsevier Inc. All rights reserved.

Flawed Execution: A Case Study on Operational Contract Support

DTIC Science & Technology

2016-06-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA JOINT APPLIED PROJECT FLAWED EXECUTION: A CASE STUDY ON OPERATIONAL CONTRACT SUPPORT June 2016...applied project 4. TITLE AND SUBTITLE FLAWED EXECUTION: A CASE STUDY ON OPERATIONAL CONTRACT SUPPORT 5. FUNDING NUMBERS 6. AUTHOR(S) Scott F...unlimited FLAWED EXECUTION: A CASE STUDY ON OPERATIONAL CONTRACT SUPPORT Scott F. Taggart, Captain, United States Marine Corps Jacob Ledford

Detection and Characterization of Flaws in Sprayed on Foam Insulation with Pulsed Terahertz Frequency Electromagnetic Waves

NASA Technical Reports Server (NTRS)

Winfree, William P.; Madaras, Eric I.

2005-01-01

The detection and repair of flaws such as voids and delaminations in the sprayed on foam insulation of the external tank reduces the probability of foam debris during shuttle ascent. The low density of sprayed on foam insulation along with it other physical properties makes detection of flaws difficult with conventional techniques. An emerging technology that has application for quantitative evaluation of flaws in the foam is pulsed electromagnetic waves at terahertz frequencies. The short wavelengths of these terahertz pulses make them ideal for imaging flaws in the foam. This paper examines the application of terahertz pulses for flaw detection in foam characteristic of the foam insulation of the external tank. Of particular interest is the detection of voids and delaminations, encapsulated in the foam or at the interface between the foam and a metal backing. The technique is shown to be capable of imaging small voids and delaminations through as much as 20 cm of foam. Methods for reducing the temporal responses of the terahertz pulses to improve flaw detection and yield quantitative characterizations of the size and location of the flaws are discussed.

An interlaminar tension strength specimen

NASA Technical Reports Server (NTRS)

Jackson, Wade C.; Martin, Roderick H.

1992-01-01

This paper describes a technique to determine interlaminar tension strength, sigma(sub 3c) of a fiber reinforced composite material using a curved beam. The specimen was a unidirectional curved beam, bent 90 degrees, with straight arms. Attached to each arm was a hinged loading mechanism which was held by the grips of a tensile testing machine. Geometry effects of the specimen, including the effects of loading arm length, inner radius, thickness, and width, were studied. The data sets fell into two categories: low strength corresponding to a macroscopic flaw related failure and high strength corresponding to a microscopic flaw related failure. From the data available, the loading arm length had no effect on sigma(sub 3c). The inner radius was not expected to have a significant effect on sigma(sub 3c), but this conclusion could not be confirmed because of differences in laminate quality for each curve geometry. The thicker specimens had the lowest value of sigma(sub 3c) because of poor laminate quality. Width was found to affect the value of sigma(sub 3c) only slightly. The wider specimens generally had a slightly lower strength since more material was under high stress, and hence, had a larger probability of containing a significant flaw.

Final Assessment of Manual Ultrasonic Examinations Applied to Detect Flaws in Primary System Dissimilar Metal Welds at North Anna Power Station

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, Michael T.; Diaz, Aaron A.; Cinson, Anthony D.

2014-03-24

PNNL conducted a technical assessment of the NDE issues and protocols that led to missed detections of several axially oriented flaws in a steam generator primary inlet dissimilar metal weld at North Anna Power Station, Unit 1 (NAPS-1). This particular component design exhibits a significant outside-diameter (OD) taper that is not included as a blind performance demonstration mock-up within the industry’s Performance Demonstration Initiative, administered by EPRI. For this reason, the licensee engaged EPRI to assist in the development of a technical justification to support the basis for a site-specific qualification. The service-induced flaws at NAPS-1 were eventually detected asmore » a result of OD surface machining in preparation for a full structural weld overlay. The machining operation uncovered the existence of two through-wall flaws, based on the observance of primary water leaking from the dissimilar metal weld. A total of five axially oriented flaws were detected in varied locations around the weld circumference. The field volumetric examination that was conducted at NAPS-1 was a non-encoded, real-time manual ultrasonic examination. PNNL conducted both an initial assessment, and subsequently, a more rigorous technical evaluation (reported here), which has identified an array of NDE issues that may have led to the subject missed detections. These evaluations were performed through technical reviews and discussions with NRC staff, EPRI NDE Center personnel, industry and ISI vendor personnel, and ultrasonic transducer manufacturers, and laboratory tests, to better understand the underlying issues at North Anna.« less

Comment on "Combination of cupric ion with hydroxylamine and hydrogen peroxide for the control of bacterial biofilms on RO membranes by Hye-Jin Lee, Hyung-Eun Kim, Changha Lee [Water Research 110, 2017, 83-90]".

PubMed

Chen, Long; Peng, Ying; Tang, Min; Wu, Feng

2017-07-01

The methodology employed by Lee et al. to terminate their bactericidal assays was found to be flawed via our demonstrations. Briefly, EDTA or sulfite combining with cupric ion did not fully terminate, and instead even boosted the P. aeruginosa death. We therefore suggested them to seek for other means of reaction termination, such as the combination of buffering agent PBS and Cu(II)-complexing agent EDTA. Copyright © 2017 Elsevier Ltd. All rights reserved.

Correspondence: Some general points regarding Ledberg and Wennberg, BMC Medical Research Methodology 2014 April 27;14:58.

PubMed

Böhning, Dankmar; van der Heijden, Peter G M

2015-07-07

The purpose of this note is to contribute some general points on a recent paper by Ledberg and Wennberg (BMC Med Res Meth 14:58, 2014) which need to be rectified. They advocate the capture-removal estimator. First, we will discuss drawbacks of this estimator in comparison to the Lincoln-Petersen estimator. Second, we show that their evaluation of the Chao estimator is flawed. We conclude that some statements in Ledberg and Wennberg with respect to Chao's estimator and removal estimation need to be taken with great caution.

PACE team response shows a disregard for the principles of science.

PubMed

Edwards, Jonathan

2017-08-01

The PACE trial of cognitive behavioural therapy and graded exercise therapy for chronic fatigue syndrome/myalgic encephalomyelitis has raised serious questions about research methodology. An editorial article by Geraghty gives a fair account of the problems involved, if anything understating the case. The response by White et al. fails to address the key design flaw, of an unblinded study with subjective outcome measures, apparently demonstrating a lack of understanding of basic trial design requirements. The failure of the academic community to recognise the weakness of trials of this type suggests that a major overhaul of quality control is needed.

Investigation into the use of smartphone as a machine vision device for engineering metrology and flaw detection, with focus on drilling

NASA Astrophysics Data System (ADS)

Razdan, Vikram; Bateman, Richard

2015-05-01

This study investigates the use of a Smartphone and its camera vision capabilities in Engineering metrology and flaw detection, with a view to develop a low cost alternative to Machine vision systems which are out of range for small scale manufacturers. A Smartphone has to provide a similar level of accuracy as Machine Vision devices like Smart cameras. The objective set out was to develop an App on an Android Smartphone, incorporating advanced Computer vision algorithms written in java code. The App could then be used for recording measurements of Twist Drill bits and hole geometry, and analysing the results for accuracy. A detailed literature review was carried out for in-depth study of Machine vision systems and their capabilities, including a comparison between the HTC One X Android Smartphone and the Teledyne Dalsa BOA Smart camera. A review of the existing metrology Apps in the market was also undertaken. In addition, the drilling operation was evaluated to establish key measurement parameters of a twist Drill bit, especially flank wear and diameter. The methodology covers software development of the Android App, including the use of image processing algorithms like Gaussian Blur, Sobel and Canny available from OpenCV software library, as well as designing and developing the experimental set-up for carrying out the measurements. The results obtained from the experimental set-up were analysed for geometry of Twist Drill bits and holes, including diametrical measurements and flaw detection. The results show that Smartphones like the HTC One X have the processing power and the camera capability to carry out metrological tasks, although dimensional accuracy achievable from the Smartphone App is below the level provided by Machine vision devices like Smart cameras. A Smartphone with mechanical attachments, capable of image processing and having a reasonable level of accuracy in dimensional measurement, has the potential to become a handy low-cost Machine vision system for small scale manufacturers, especially in field metrology and flaw detection.

Traditional Indian medicine and homeopathy for HIV/AIDS: a review of the literature

PubMed Central

Fritts, M; Crawford, CC; Quibell, D; Gupta, A; Jonas, WB; Coulter, I; Andrade, SA

2008-01-01

Background Allopathic practitioners in India are outnumbered by practitioners of traditional Indian medicine and homeopathy (TIMH), which is used by up to two-thirds of its population to help meet primary health care needs, particularly in rural areas. India has an estimated 2.5 million HIV infected persons. However, little is known about TIMH use, safety or efficacy in HIV/AIDS management in India, which has one of the largest indigenous medical systems in the world. The purpose of this review was to assess the quality of peer-reviewed, published literature on TIMH for HIV/AIDS care and treatment. Results Of 206 original articles reviewed, 21 laboratory studies, 17 clinical studies, and 6 previous reviews of the literature were identified that covered at least one system of TIMH, which includes Ayurveda, Unani medicine, Siddha medicine, homeopathy, yoga and naturopathy. Most studies examined either Ayurvedic or homeopathic treatments. Only 4 of these studies were randomized controlled trials, and only 10 were published in MEDLINE-indexed journals. Overall, the studies reported positive effects and even "cure" and reversal of HIV infection, but frequent methodological flaws call into question their internal and external validity. Common reasons for poor quality included small sample sizes, high drop-out rates, design flaws such as selection of inappropriate or weak outcome measures, flaws in statistical analysis, and reporting flaws such as lack of details on products and their standardization, poor or no description of randomization, and incomplete reporting of study results. Conclusion This review exposes a broad gap between the widespread use of TIMH therapies for HIV/AIDS, and the dearth of high-quality data supporting their effectiveness and safety. In light of the suboptimal effectiveness of vaccines, barrier methods and behavior change strategies for prevention of HIV infection and the cost and side effects of antiretroviral therapy (ART) for its treatment, it is both important and urgent to develop and implement a rigorous research agenda to investigate the potential risks and benefits of TIMH and to identify its role in the management of HIV/AIDS and associated illnesses in India. PMID:19102742

Methodological Considerations in Designing and Evaluating Animal-Assisted Interventions.

PubMed

Stern, Cindy; Chur-Hansen, Anna

2013-02-27

This paper presents a discussion of the literature on animal-assisted interventions and describes limitations surrounding current methodological quality. Benefits to human physical, psychological and social health cannot be empirically confirmed due to the methodological limitations of the existing body of research, and comparisons cannot validly be made across different studies. Without a solid research base animal-assisted interventions will not receive recognition and acceptance as a credible alternative health care treatment. The paper draws on the work of four systematic reviews conducted over April-May 2009, with no date restrictions, focusing exclusively on the use of canine-assisted interventions for older people residing in long-term care. The reviews revealed a lack of good quality studies. Although the literature base has grown in volume since its inception, it predominantly consists of anecdotal accounts and reports. Experimental studies undertaken are often flawed in aspects of design, conduct and reporting. There are few qualitative studies available leading to the inability to draw definitive conclusions. It is clear that due to the complexities associated with these interventions not all weaknesses can be eliminated. However, there are basic methodological weaknesses that can be addressed in future studies in the area. Checklists for quantitative and qualitative research designs to guide future research are offered to help address methodological rigour.

Cognitive-behavioural bibliotherapy for hypochondriasis: a pilot study.

PubMed

Buwalda, Femke M; Bouman, Theo K

2009-05-01

The present study aims to determine whether cognitive-behavioural minimal contact bibliotherapy is acceptable to participants suffering from DSM-IV-TR hypochondriasis, and whether this intervention is able to reduce hypochondriacal complaints, as well as comorbid depressive complaints and trait anxiety. Participants were assigned to either an immediate treatment condition, or subsequently to a waiting list condition. Participants were sent a book, Doctor, I Hope it's Nothing Serious?, containing cognitive behavioural theory and exercises. Measures were taken pre, post and at follow-up (after 3 months). Those in the waiting list group received a second pre-assessment, and were then enrolled in the bibliotherapy. Results showed that participants were accepting of the cognitive-behavioural theory. Furthermore, results showed beneficial effects of the intervention: all effect measures decreased significantly over time, with the largest effect at post-assessment. However, a large amount of questionnaires were not returned. It is concluded that bibliotherapy may be an efficient aid in reducing hypochondriacal and comorbid complaints, but due to data attrition and methodological flaws should first be studied further.

Threatening communication: a critical re-analysis and a revised meta-analytic test of fear appeal theory.

PubMed

Peters, Gjalt-Jorn Ygram; Ruiter, Robert A C; Kok, Gerjo

2013-05-01

Despite decades of research, consensus regarding the dynamics of fear appeals remains elusive. A meta-analysis was conducted that was designed to resolve this controversy. Publications that were included in previous meta-analyses were re-analysed, and a number of additional publications were located. The inclusion criteria were full factorial orthogonal manipulations of threat and efficacy, and measurement of behaviour as an outcome. Fixed and random effects models were used to compute mean effect size estimates. Meta-analysis of the six studies that satisfied the inclusion criteria clearly showed a significant interaction between threat and efficacy, such that threat only had an effect under high efficacy (d = 0.31), and efficacy only had an effect under high threat (d = 0.71). Inconsistency in results regarding the effectiveness of threatening communication can likely be attributed to flawed methodology. Proper tests of fear appeal theory yielded the theoretically hypothesised interaction effect. Threatening communication should exclusively be used when pilot studies indicate that an intervention successfully enhances efficacy.

Threatening communication: a critical re-analysis and a revised meta-analytic test of fear appeal theory

PubMed Central

Peters, Gjalt-Jorn Ygram; Ruiter, Robert A.C.; Kok, Gerjo

2013-01-01

Despite decades of research, consensus regarding the dynamics of fear appeals remains elusive. A meta-analysis was conducted that was designed to resolve this controversy. Publications that were included in previous meta-analyses were re-analysed, and a number of additional publications were located. The inclusion criteria were full factorial orthogonal manipulations of threat and efficacy, and measurement of behaviour as an outcome. Fixed and random effects models were used to compute mean effect size estimates. Meta-analysis of the six studies that satisfied the inclusion criteria clearly showed a significant interaction between threat and efficacy, such that threat only had an effect under high efficacy (d = 0.31), and efficacy only had an effect under high threat (d = 0.71). Inconsistency in results regarding the effectiveness of threatening communication can likely be attributed to flawed methodology. Proper tests of fear appeal theory yielded the theoretically hypothesised interaction effect. Threatening communication should exclusively be used when pilot studies indicate that an intervention successfully enhances efficacy. PMID:23772231

Outcomes and disparities in liver transplantation will be improved by redistricting-cons.

PubMed

Goldberg, David Seth; Karp, Seth

2017-04-01

Over the last 2 years, the liver transplant community has been debating a proposal to redraw the maps of organ distribution. The basis for these proposed changes is reported disparities in severity of illness at transplantation across the USA - however, this is based on the allocation model for end-stage liver disease score. In this review, we provide a critical overview of the redistribution proposal, its flaws and how it may worsen outcomes and exacerbate disparities in liver transplantation. The main findings we highlight are data questioning the disparity metric used to justify the redistribution. We also review data published in recent articles and presented at public forums questioning whether there truly are disparities in access to transplant care among the broader population with liver disease, and whether disparities even getting to the waitlist are important and not to be ignored. This review article highlights major methodological and policy flaws with the current redistribution proposal. We demonstrate how the waitlist disparities that the proposal is intended to fix are not as they seem. Furthermore, if this proposal is passed, outcomes of liver transplantation nationally may worsen, and disparities for those with limited access to healthcare will worsen.

Fatigue Life Prediction Based on Crack Closure and Equivalent Initial Flaw Size

PubMed Central

Wang, Qiang; Zhang, Wei; Jiang, Shan

2015-01-01

Failure analysis and fatigue life prediction are necessary and critical for engineering structural materials. In this paper, a general methodology is proposed to predict fatigue life of smooth and circular-hole specimens, in which the crack closure model and equivalent initial flaw size (EIFS) concept are employed. Different effects of crack closure on small crack growth region and long crack growth region are considered in the proposed method. The EIFS is determined by the fatigue limit and fatigue threshold stress intensity factor △Kth. Fatigue limit is directly obtained from experimental data, and △Kth is calculated by using a back-extrapolation method. Experimental data for smooth and circular-hole specimens in three different alloys (Al2024-T3, Al7075-T6 and Ti-6Al-4V) under multiple stress ratios are used to validate the method. In the validation section, Semi-circular surface crack and quarter-circular corner crack are assumed to be the initial crack shapes for the smooth and circular-hole specimens, respectively. A good agreement is observed between model predictions and experimental data. The detailed analysis and discussion are performed on the proposed model. Some conclusions and future work are given. PMID:28793625

POD evaluation using simulation: A phased array UT case on a complex geometry part

NASA Astrophysics Data System (ADS)

Dominguez, Nicolas; Reverdy, Frederic; Jenson, Frederic

2014-02-01

The use of Probability of Detection (POD) for NDT performances demonstration is a key link in products lifecycle management. The POD approach is to apply the given NDT procedure on a series of known flaws to estimate the probability to detect with respect to the flaw size. A POD is relevant if and only if NDT operations are carried out within the range of variability authorized by the procedure. Such experimental campaigns require collection of large enough datasets to cover the range of variability with sufficient occurrences to build a reliable POD statistics, leading to expensive costs to get POD curves. In the last decade research activities have been led in the USA with the MAPOD group and later in Europe with the SISTAE and PICASSO projects based on the idea to use models and simulation tools to feed POD estimations. This paper proposes an example of application of POD using simulation on the inspection procedure of a complex -full 3D- geometry part using phased arrays ultrasonic testing. It illustrates the methodology and the associated tools developed in the CIVA software. The paper finally provides elements of further progress in the domain.

Quantitative flaw characterization with scanning laser acoustic microscopy

NASA Technical Reports Server (NTRS)

Generazio, E. R.; Roth, D. J.

1986-01-01

Surface roughness and diffraction are two factors that have been observed to affect the accuracy of flaw characterization with scanning laser acoustic microscopy. In accuracies can arise when the surface of the test sample is acoustically rough. It is shown that, in this case, Snell's law is no longer valid for determining the direction of sound propagation within the sample. The relationship between the direction of sound propagation within the sample, the apparent flaw depth, and the sample's surface roughness is investigated. Diffraction effects can mask the acoustic images of minute flaws and make it difficult to establish their size, depth, and other characteristics. It is shown that for Fraunhofer diffraction conditions the acoustic image of a subsurface defect corresponds to a two-dimensional Fourier transform. Transforms based on simulated flaws are used to infer the size and shape of the actual flaw.

FMC/TFM experimental comparisons

NASA Astrophysics Data System (ADS)

Spencer, Roger; Sunderman, Ruth; Todorov, Evgueni

2018-04-01

Ultrasonic full matrix capture/total focusing method (FMC/TFM) technology has progressed significantly over the past few years and has seen increased use in industry. The technology has the potential to provide better detection and measurement capabilities for weld flaws, as well as, many other applications including additive manufacturing. This project looked at the effectiveness of FMC/TFM for detection and sizing of both planar and volumetric flaw types. FMC/TFM experimental data was collected and processed using multiple combinations of probe types and wave propagation modes. The data was then compared to typical ultrasonic phased-array results, as well as FMC/TFM inspection simulations.

Structural integrity test and assessment.

NASA Technical Reports Server (NTRS)

Suggs, F.; Poe, R.; Sannicandro, R.

1972-01-01

The feasibility of using an ultrasonic system on board the Space Shuttle Orbiter to facilitate structural evaluation and assessment was studied. Two factors are considered that could limit the capability of an ultrasonic system: (1) the effect of structure configuration and (2) the noise generated during vehicle launch. Results of the study indicate that although the structural configuration has direct bearing on sound propagation, strategic location of transducers will still permit flaw detection. The ultrasonic response data show that a severe acoustic environment does not interfere significantly with either propagation and reflection of surface waves or detection of crack-like flaws in the structure.

Assessment of item-writing flaws in multiple-choice questions.

PubMed

Nedeau-Cayo, Rosemarie; Laughlin, Deborah; Rus, Linda; Hall, John

2013-01-01

This study evaluated the quality of multiple-choice questions used in a hospital's e-learning system. Constructing well-written questions is fraught with difficulty, and item-writing flaws are common. Study results revealed that most items contained flaws and were written at the knowledge/comprehension level. Few items had linked objectives, and no association was found between the presence of objectives and flaws. Recommendations include education for writing test questions.

Usability Flaws in Medication Alerting Systems: Impact on Usage and Work System.

PubMed

Marcilly, R; Ammenwerth, E; Roehrer, E; Pelayo, S; Vasseur, F; Beuscart-Zéphir, M-C

2015-08-13

Previous research has shown that medication alerting systems face usability issues. There has been no previous attempt to systematically explore the consequences of usability flaws in such systems on users (i.e. usage problems) and work systems (i.e. negative outcomes). This paper aims at exploring and synthesizing the consequences of usability flaws in terms of usage problems and negative outcomes on the work system. A secondary analysis of 26 papers included in a prior systematic review of the usability flaws in medication alerting was performed. Usage problems and negative outcomes were extracted and sorted. Links between usability flaws, usage problems, and negative outcomes were also analyzed. Poor usability generates a large variety of consequences. It impacts the user from a cognitive, behavioral, emotional, and attitudinal perspective. Ultimately, usability flaws have negative consequences on the workflow, the effectiveness of the technology, the medication management process, and, more importantly, patient safety. Only few complete pathways leading from usability flaws to negative outcomes were identified. Usability flaws in medication alerting systems impede users, and ultimately their work system, and negatively impact patient safety. Therefore, the usability dimension may act as a hidden explanatory variable that could explain, at least partly, the (absence of) intended outcomes of new technology.

Usability Flaws in Medication Alerting Systems: Impact on Usage and Work System

PubMed Central

Ammenwerth, E.; Roehrer, E.; Pelayo, S.; Vasseur, F.; Beuscart-Zéphir, M.-C.

2015-01-01

Summary Objectives Previous research has shown that medication alerting systems face usability issues. There has been no previous attempt to systematically explore the consequences of usability flaws in such systems on users (i.e. usage problems) and work systems (i.e. negative outcomes). This paper aims at exploring and synthesizing the consequences of usability flaws in terms of usage problems and negative outcomes on the work system. Methods A secondary analysis of 26 papers included in a prior systematic review of the usability flaws in medication alerting was performed. Usage problems and negative outcomes were extracted and sorted. Links between usability flaws, usage problems, and negative outcomes were also analyzed. Results Poor usability generates a large variety of consequences. It impacts the user from a cognitive, behavioral, emotional, and attitudinal perspective. Ultimately, usability flaws have negative consequences on the workflow, the effectiveness of the technology, the medication management process, and, more importantly, patient safety. Only few complete pathways leading from usability flaws to negative outcomes were identified. Conclusion Usability flaws in medication alerting systems impede users, and ultimately their work system, and negatively impact patient safety. Therefore, the usability dimension may act as a hidden explanatory variable that could explain, at least partly, the (absence of) intended outcomes of new technology. PMID:26123906

Detection and assessment of flaws in friction stir welded joints using ultrasonic guided waves: experimental and finite element analysis

NASA Astrophysics Data System (ADS)

Fakih, Mohammad Ali; Mustapha, Samir; Tarraf, Jaafar; Ayoub, Georges; Hamade, Ramsey

2018-02-01

Ultrasonic guided waves (GWs), e.g. Lamb waves, have been proven effective in the detection of defects such as corrosion, cracking, delamination, and debonding in both composite and metallic structures. They are a significant tool employed in structural health monitoring. In this study, the ability of ultrasonic GWs to assess the quality of friction stir welding (FSW) was investigated. Four friction stir welded AZ31B magnesium plates processed with different welding parameters and a non-welded plate were used. The fundamental symmetric (S0) Lamb wave mode was excited using piezoelectric wafers (PZTs). Further, the S0 mode was separated using the "Improved complete ensemble empirical mode decomposition with adaptive noise (Improved CEEMDAN)" technique. A damage index (DI) was defined based on the variation in the amplitude of the captured wave signals in order to detect the presence and asses the severity of damage resulting from the welding process. As well, computed tomography (CT) scanning was used as a non-destructive testing (NDT) technique to assess the actual weld quality and validate predictions based on the GW approach. The findings were further confirmed using finite element analysis (FEA). To model the actual damage profile in the welds, "Mimics" software was used for the 3D reconstruction of the CT scans. The built 3D models were later used for evaluation of damage volume and for FEA. The damage volumes were correlated to the damage indices computed from both experimental and numerical data. The proposed approach showed high sensitivity of the S0 mode to internal flaws within the friction stir welded joints. This methodology has great potential as a future classification method of FSW quality.

Is tube feeding futile in advanced dementia?

PubMed Central

Lynch, Matthew C.

2016-01-01

It is controversial whether tube feeding in people with dementia improves nutritional status or prolongs survival. Guidelines published by several professional societies cite observational studies that have shown no benefit and conclude that tube feeding in patients with advanced dementia should be avoided. However, all studies on tube feeding in dementia have major methodological flaws that invalidate their findings. The present evidence is not sufficient to justify general guidelines. Patients with advanced dementia represent a very heterogeneous group, and evidence demonstrates that some patients with dementia benefit from tube feeding. However, presently available guidelines make a single recommendation against tube feeding for all patients. Clinicians, patients, and surrogates should be aware that the guidelines and prior commentary on this topic tend both to overestimate the strength of evidence for futility and to exaggerate the burdens of tube feeding. Shared decision making requires accurate information tailored to the individual patient's particular situation, not blanket guidelines based on flawed data. Lay Summary: Many doctors believe that tube feeding does not help people with advanced dementia. Scientific studies suggest that people with dementia who have feeding tubes do not live longer or gain weight compared with those who are carefully hand fed. However, these studies are not very helpful because of flaws in design, which are discussed in this article. Guidelines from professional societies make a blanket recommendation against feeding tubes for anyone with dementia, but an individual approach that takes each person's situation into account seems more appropriate. Patients and surrogates should be aware that the guidelines on this topic tend both to underestimate the benefit and exaggerate the burdens of tube feeding. PMID:27833208

Artificial Intelligence Assists Ultrasonic Inspection

NASA Technical Reports Server (NTRS)

Schaefer, Lloyd A.; Willenberg, James D.

1992-01-01

Subtle indications of flaws extracted from ultrasonic waveforms. Ultrasonic-inspection system uses artificial intelligence to help in identification of hidden flaws in electron-beam-welded castings. System involves application of flaw-classification logic to analysis of ultrasonic waveforms.

Deep flaws in weldments of aluminum and titanium

NASA Technical Reports Server (NTRS)

Masters, J. N.; Engstrom, W. L.; Bixler, W. D.

1974-01-01

Surface flawed specimens of 2219-T87 and 6Al-4V STA titanium weldments were tested to determine static failure modes, failure strength, and fatigue flaw growth characteristics. Thicknesses selected for this study were purposely set at values where, for most test conditions, abrupt instability of the flaw at fracture would not be expected. Static tests for the aluminum weldments were performed at room, LN2 and LH2 temperatures. Titanium static tests for tests were performed at room and LH2 temperatures. Results of the static tests were used to plot curves relating initial flaw size to leakage- or failure-stresses (i.e. "failure" locus curves). Cyclic tests, for both materials, were then performed at room temperature, using initial flaws only slightly below the previously established failure locus for typical proof stress levels. Cyclic testing was performed on pairs of specimens, one with and one without a simulated proof test cycle. Comparisons were made then to determine the value and effect of proof testing as affected by the various variables of proof and operating stress, flaw shape, material thickness, and alloy.

Effectiveness of Pilates exercise in treating people with chronic low back pain: a systematic review of systematic reviews

PubMed Central

2013-01-01

Background Systematic reviews provide clinical practice recommendations that are based on evaluation of primary evidence. When systematic reviews with the same aims have different conclusions, it is difficult to ascertain which review reported the most credible and robust findings. Methods This study examined five systematic reviews that have investigated the effectiveness of Pilates exercise in people with chronic low back pain. A four-stage process was used to interpret findings of the reviews. This process included comparison of research questions, included primary studies, and the level and quality of evidence of systematic reviews. Two independent reviewers assessed the level of evidence and the methodological quality of systematic reviews, using the National Health and Medical Research Council hierarchy of evidence, and the Revised Assessment of Multiple Systematic Reviews respectively. Any disagreements were resolved by a third researcher. Results A high level of consensus was achieved between the reviewers. Conflicting findings were reported by the five systematic reviews regarding the effectiveness of Pilates in reducing pain and disability in people with chronic low back pain. Authors of the systematic reviews included primary studies that did not match their questions in relation to treatment or population characteristics. A total of ten primary studies were identified across five systematic reviews. Only two of the primary studies were included in all of the reviews due to different inclusion criteria relating to publication date and status, definition of Pilates, and methodological quality. The level of evidence of reviews was low due to the methodological design of the primary studies. The methodological quality of reviews varied. Those which conducted a meta-analysis obtained higher scores. Conclusion There is inconclusive evidence that Pilates is effective in reducing pain and disability in people with chronic low back pain. This is due to the small number and poor methodological quality of primary studies. The Revised Assessment of Multiple Systematic Reviews provides a useful method of appraising the methodological quality of systematic reviews. Individual item scores, however, should be examined in addition to total scores, so that significant methodological flaws of systematic reviews are not missed, and results are interpreted appropriately. (348 words) PMID:23331384

Effectiveness of Pilates exercise in treating people with chronic low back pain: a systematic review of systematic reviews.

PubMed

Wells, Cherie; Kolt, Gregory S; Marshall, Paul; Hill, Bridget; Bialocerkowski, Andrea

2013-01-19

Systematic reviews provide clinical practice recommendations that are based on evaluation of primary evidence. When systematic reviews with the same aims have different conclusions, it is difficult to ascertain which review reported the most credible and robust findings. This study examined five systematic reviews that have investigated the effectiveness of Pilates exercise in people with chronic low back pain. A four-stage process was used to interpret findings of the reviews. This process included comparison of research questions, included primary studies, and the level and quality of evidence of systematic reviews. Two independent reviewers assessed the level of evidence and the methodological quality of systematic reviews, using the National Health and Medical Research Council hierarchy of evidence, and the Revised Assessment of Multiple Systematic Reviews respectively. Any disagreements were resolved by a third researcher. A high level of consensus was achieved between the reviewers. Conflicting findings were reported by the five systematic reviews regarding the effectiveness of Pilates in reducing pain and disability in people with chronic low back pain. Authors of the systematic reviews included primary studies that did not match their questions in relation to treatment or population characteristics. A total of ten primary studies were identified across five systematic reviews. Only two of the primary studies were included in all of the reviews due to different inclusion criteria relating to publication date and status, definition of Pilates, and methodological quality. The level of evidence of reviews was low due to the methodological design of the primary studies. The methodological quality of reviews varied. Those which conducted a meta-analysis obtained higher scores. There is inconclusive evidence that Pilates is effective in reducing pain and disability in people with chronic low back pain. This is due to the small number and poor methodological quality of primary studies. The Revised Assessment of Multiple Systematic Reviews provides a useful method of appraising the methodological quality of systematic reviews. Individual item scores, however, should be examined in addition to total scores, so that significant methodological flaws of systematic reviews are not missed, and results are interpreted appropriately. (348 words).

Raising quality of maintenance and control of metallic structures in large-load technological machines

NASA Astrophysics Data System (ADS)

Drygin, M. Yu; Kuryshkin, N. P.

2018-01-01

Active growth of coal extraction and underinvestment of coal mining in Russia lead to the fact that technical state of more than 86% of technological machines at opencast coal mines is unacceptable. One of the most significant problems is unacceptable state of supporting metallic structures of excavators and mine dump trucks. The analysis has shown that defects in these metallic structures had been accumulated for a long time. Their removal by the existing method of repair welding was not effective - the flaws reappeared in 2-6 months of technological machines’ service. The authors detected the prime causes that did not allow to make a good repair welding joint. A new technology of repair welding had been tested and endorsed, and this allowed to reduce the number of welded joints’ flaws by 85% without additional raising welders’ qualification. As a result the number of flaws in metallic structures of the equipment had been reduced by 35 % as early as in the first year of using the new technology.

Uniaxial Tensile Strength and Flaw Characterization of SiC-N

DTIC Science & Technology

2014-01-01

study has been largely limited to tiles less than 40 mm thick, especially versus small caliber threats (1, 3, 4). Research and production of ceramic... production of very large ceramic components. One issue that may occur in the production of large ceramic components is uneven powder packing during the...flaw is important because flaws originate from different stages during the production process. Flaws associated with the processing of the material

Acoustic emission testing of 12-nickel maraging steel pressure vessels

NASA Technical Reports Server (NTRS)

Dunegan, H. L.

1973-01-01

Acoustic emission data were obtained from three point bend fracture toughness specimens of 12-nickel maraging steel, and two pressure vessels of the same material. One of the pressure vessels contained a prefabricated flaw which was extended and sharpened by fatigue cycling. It is shown that the flawed vessel had similar characteristics to the fracture specimens, thereby allowing estimates to be made of its nearness to failure during a proof test. Both the flawed and unflawed pressure vessel survived the proof pressure and 5 cycles to the working pressure, but it was apparent from the acoustic emission response during the proof cycle and the 5 cycles to the working pressure that the flawed vessel was very near failure. The flawed vessel did not survive a second cycle to the proof pressure before failure due to flaw extension through the wall (causing a leak).

Stress intensity factors for long, deep surface flaws in plates under extensional fields

NASA Technical Reports Server (NTRS)

Harms, A. E.; Smith, C. W.

1973-01-01

Using a singular solution for a part circular crack, a Taylor Series Correction Method (TSCM) was verified for extracting stress intensity factors from photoelastic data. Photoelastic experiments were then conducted on plates with part circular and flat bottomed cracks for flaw depth to thickness ratios of 0.25, 0.50 and 0.75 and for equivalent flaw depth to equivalent ellipse length values ranging from 0.066 to 0.319. Experimental results agreed well with the Smith theory but indicated that the use of the ''equivalent'' semi-elliptical flaw results was not valid for a/2c less than 0.20. Best overall agreement for the moderate (a/t approximately 0.5) to deep flaws (a/t approximatelly 0.75) and a/2c greater than 0.15 was found with a semi-empirical theory, when compared on the basis of equivalent flaw depth and area.

Effect of periodontal treatment on preterm birth rate: a systematic review of meta-analyses.

PubMed

López, Néstor J; Uribe, Sergio; Martinez, Benjamín

2015-02-01

Preterm birth is a major cause of neonatal morbidity and mortality in both developed and developing countries. Preterm birth is a highly complex syndrome that includes distinct clinical subtypes in which many different causes may be involved. The results of epidemiological, molecular, microbiological and animal-model studies support a positive association between maternal periodontal disease and preterm birth. However, the results of intervention studies carried out to determine the effect of periodontal treatment on reducing the risk of preterm birth are controversial. This systematic review critically analyzes the methodological issues of meta-analyses of the studies to determine the effect of periodontal treatment to reduce preterm birth. The quality of the individual randomized clinical trials selected is of highest relevance for a systematic review. This article describes the methodological features that should be identified a priori and assessed individually to determine the quality of a randomized controlled trial performed to evaluate the effect of periodontal treatment on pregnancy outcomes. The AMSTAR and the PRISMA checklist tools were used to assess the quality of the six meta-analyses selected, and the bias domain of the Cochrane Collaboration's Tool was applied to evaluate each of the trials included in the meta-analyses. In addition, the methodological characteristics of each clinical trial were assessed. The majority of the trials included in the meta-analyses have significant methodological flaws that threaten their internal validity. The lack of effect of periodontal treatment on preterm birth rate concluded by four meta-analyses, and the positive effect of treatment for reducing preterm birth risk concluded by the remaining two meta-analyses are not based on consistent scientific evidence. Well-conducted randomized controlled trials using rigorous methodology, including appropriate definition of the exposure, adequate control of confounders for preterm birth and application of effective periodontal interventions to eliminate periodontal infection, are needed to confirm the positive association between periodontal disease and preterm birth. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Methodological quality of meta-analyses on treatments for chronic obstructive pulmonary disease: a cross-sectional study using the AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool.

PubMed

Ho, Robin S T; Wu, Xinyin; Yuan, Jinqiu; Liu, Siya; Lai, Xin; Wong, Samuel Y S; Chung, Vincent C H

2015-01-08

Meta-analysis (MA) of randomised trials is considered to be one of the best approaches for summarising high-quality evidence on the efficacy and safety of treatments. However, methodological flaws in MAs can reduce the validity of conclusions, subsequently impairing the quality of decision making. To assess the methodological quality of MAs on COPD treatments. A cross-sectional study on MAs of COPD trials. MAs published during 2000-2013 were sampled from the Cochrane Database of Systematic Reviews and Database of Abstracts of Reviews of Effect. Methodological quality was assessed using the validated AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool. Seventy-nine MAs were sampled. Only 18% considered the scientific quality of primary studies when formulating conclusions and 49% used appropriate meta-analytic methods to combine findings. The problems were particularly acute among MAs on pharmacological treatments. In 48% of MAs the authors did not report conflict of interest. Fifty-eight percent reported harmful effects of treatment. Publication bias was not assessed in 65% of MAs, and only 10% had searched non-English databases. The methodological quality of the included MAs was disappointing. Consideration of scientific quality when formulating conclusions should be made explicit. Future MAs should improve on reporting conflict of interest and harm, assessment of publication bias, prevention of language bias and use of appropriate meta-analytic methods.

Methodological quality of meta-analyses on treatments for chronic obstructive pulmonary disease: a cross-sectional study using the AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool

PubMed Central

Ho, Robin ST; Wu, Xinyin; Yuan, Jinqiu; Liu, Siya; Lai, Xin; Wong, Samuel YS; Chung, Vincent CH

2015-01-01

Background: Meta-analysis (MA) of randomised trials is considered to be one of the best approaches for summarising high-quality evidence on the efficacy and safety of treatments. However, methodological flaws in MAs can reduce the validity of conclusions, subsequently impairing the quality of decision making. Aims: To assess the methodological quality of MAs on COPD treatments. Methods: A cross-sectional study on MAs of COPD trials. MAs published during 2000–2013 were sampled from the Cochrane Database of Systematic Reviews and Database of Abstracts of Reviews of Effect. Methodological quality was assessed using the validated AMSTAR (Assessing the Methodological Quality of Systematic Reviews) tool. Results: Seventy-nine MAs were sampled. Only 18% considered the scientific quality of primary studies when formulating conclusions and 49% used appropriate meta-analytic methods to combine findings. The problems were particularly acute among MAs on pharmacological treatments. In 48% of MAs the authors did not report conflict of interest. Fifty-eight percent reported harmful effects of treatment. Publication bias was not assessed in 65% of MAs, and only 10% had searched non-English databases. Conclusions: The methodological quality of the included MAs was disappointing. Consideration of scientific quality when formulating conclusions should be made explicit. Future MAs should improve on reporting conflict of interest and harm, assessment of publication bias, prevention of language bias and use of appropriate meta-analytic methods. PMID:25569783

Randomized clinical trials in implant therapy: relationships among methodological, statistical, clinical, paratextual features and number of citations.

PubMed

Nieri, Michele; Clauser, Carlo; Franceschi, Debora; Pagliaro, Umberto; Saletta, Daniele; Pini-Prato, Giovanpaolo

2007-08-01

The aim of the present study was to investigate the relationships among reported methodological, statistical, clinical and paratextual variables of randomized clinical trials (RCTs) in implant therapy, and their influence on subsequent research. The material consisted of the RCTs in implant therapy published through the end of the year 2000. Methodological, statistical, clinical and paratextual features of the articles were assessed and recorded. The perceived clinical relevance was subjectively evaluated by an experienced clinician on anonymous abstracts. The impact on research was measured by the number of citations found in the Science Citation Index. A new statistical technique (Structural learning of Bayesian Networks) was used to assess the relationships among the considered variables. Descriptive statistics revealed that the reported methodology and statistics of RCTs in implant therapy were defective. Follow-up of the studies was generally short. The perceived clinical relevance appeared to be associated with the objectives of the studies and with the number of published images in the original articles. The impact on research was related to the nationality of the involved institutions and to the number of published images. RCTs in implant therapy (until 2000) show important methodological and statistical flaws and may not be appropriate for guiding clinicians in their practice. The methodological and statistical quality of the studies did not appear to affect their impact on practice and research. Bayesian Networks suggest new and unexpected relationships among the methodological, statistical, clinical and paratextual features of RCTs.

An evaluation of the quality of statistical design and analysis of published medical research: results from a systematic survey of general orthopaedic journals.

PubMed

Parsons, Nick R; Price, Charlotte L; Hiskens, Richard; Achten, Juul; Costa, Matthew L

2012-04-25

The application of statistics in reported research in trauma and orthopaedic surgery has become ever more important and complex. Despite the extensive use of statistical analysis, it is still a subject which is often not conceptually well understood, resulting in clear methodological flaws and inadequate reporting in many papers. A detailed statistical survey sampled 100 representative orthopaedic papers using a validated questionnaire that assessed the quality of the trial design and statistical analysis methods. The survey found evidence of failings in study design, statistical methodology and presentation of the results. Overall, in 17% (95% confidence interval; 10-26%) of the studies investigated the conclusions were not clearly justified by the results, in 39% (30-49%) of studies a different analysis should have been undertaken and in 17% (10-26%) a different analysis could have made a difference to the overall conclusions. It is only by an improved dialogue between statistician, clinician, reviewer and journal editor that the failings in design methodology and analysis highlighted by this survey can be addressed.

Understanding Nutritional Epidemiology and Its Role in Policy12

PubMed Central

Satija, Ambika; Yu, Edward; Willett, Walter C; Hu, Frank B

2015-01-01

Nutritional epidemiology has recently been criticized on several fronts, including the inability to measure diet accurately, and for its reliance on observational studies to address etiologic questions. In addition, several recent meta-analyses with serious methodologic flaws have arrived at erroneous or misleading conclusions, reigniting controversy over formerly settled debates. All of this has raised questions regarding the ability of nutritional epidemiologic studies to inform policy. These criticisms, to a large degree, stem from a misunderstanding of the methodologic issues of the field and the inappropriate use of the drug trial paradigm in nutrition research. The exposure of interest in nutritional epidemiology is human diet, which is a complex system of interacting components that cumulatively affect health. Consequently, nutritional epidemiology constantly faces a unique set of challenges and continually develops specific methodologies to address these. Misunderstanding these issues can lead to the nonconstructive and sometimes naive criticisms we see today. This article aims to clarify common misunderstandings of nutritional epidemiology, address challenges to the field, and discuss the utility of nutritional science in guiding policy by focusing on 5 broad questions commonly asked of the field. PMID:25593140

Flaw tolerance promoted by dissipative deformation mechanisms between material building blocks

NASA Astrophysics Data System (ADS)

Verho, Tuukka; Buehler, Markus J.

2014-09-01

Novel high-performance composite materials often draw inspiration from natural materials such as bone or mollusc shells. A prime feature of such composites is that they are, like their natural counterparts, quasibrittle. They are tolerant to material flaws up to a certain characteristic flaw-tolerant size scale, exhibiting high strength and toughness, but start to behave in a brittle manner when sufficiently large flaws are present. Here, we establish that better flaw tolerance can be achieved by maximizing fracture toughness relative to the maximum elastic energy available in the material, and we demonstrate this concept with simple two-dimensional coarse-grained simulations where the transition from brittle to quasibrittle behaviour is examined.

Effect of thermal profile on cyclic flaw growth in aluminum

NASA Technical Reports Server (NTRS)

Engstrom, W. L.

1975-01-01

Surface flawed and single edge notch tension specimens of 2219-T851 and -T87 aluminum were tested to determine static fracture characteristics and base line (constant amplitude, constant temperature) cyclic flaw growth behavior. Subsequent testing was then conducted in which flawed specimens were subjected to a thermal profile in which the applied stress was varied simultaneously with the temperature. The profile used represents a simplified space shuttle orbiter load/temperature flight cycle. Test temperatures included the range from 144K (-200 F) up to 450K (350 F). The measured flaw growth rates obtained from the thermal profile tests were then compared with rates predicted by assuming linear cumulative damage of base line rates.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crutzen, S.; Koble, T.D.; Lemaitre, P.

Applications of the Leak Before Break (LBB) concept involve the knowledge of flaw presence and characteristics. In Service Inspection is given the responsibility of detecting flaws of a determined importance to locate them precisely and to classify them in broad families. Often LBB concepts application imply the knowledge of flaw characteristics such as through wall depth; length at the inner diameter (ID) or outer diameter (OD) surface; orientation or tilt and skew angles; branching; surface roughness; opening or width; crack tip aspect. Besides detection and characterization, LBB evaluations consider important the fact that a crack could be in the weldmore » material or in the base material or in the heat affected zone. Cracks in tee junctions, in homogenous simple welds and in elbows are not considered in the same way. Essential variables of a flaw or defect are illustrated, and examples of flaws found in primary piping as reported by plant operators or service vendors are given. If such flaw variables are important in the applications of LBB concepts, essential is then the knowledge of the performance achievable by NDE techniques, during an ISI, in detecting such flaws, in locating them and in correctly evaluating their characteristics.« less

New techniques for modeling the reliability of reactor pressure vessels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, K.I.; Simonen, F.A.; Liebetrau, A.M.

1985-12-01

In recent years several probabilistic fracture mechanics codes, including the VISA code, have been developed to predict the reliability of reactor pressure vessels. This paper describes new modeling techniques used in a second generation of the VISA code entitled VISA-II. Results are presented that show the sensitivity of vessel reliability predictions to such factors as inservice inspection to detect flaws, random positioning of flaws within the vessel walls thickness, and fluence distributions that vary through-out the vessel. The algorithms used to implement these modeling techniques are also described. Other new options in VISA-II are also described in this paper. Themore » effect of vessel cladding has been included in the heat transfer, stress, and fracture mechanics solutions in VISA-II. The algorithm for simulating flaws has been changed to consider an entire vessel rather than a single flaw in a single weld. The flaw distribution was changed to include the distribution of both flaw depth and length. A menu of several alternate equations has been included to predict the shift in RTNDT. For flaws that arrest and later re-initiate, an option was also included to allow correlating the current arrest thoughness with subsequent initiation toughnesses. 21 refs.« less

Full waveform inversion for ultrasonic flaw identification

NASA Astrophysics Data System (ADS)

Seidl, Robert; Rank, Ernst

2017-02-01

Ultrasonic Nondestructive Testing is concerned with detecting flaws inside components without causing physical damage. It is possible to detect flaws using ultrasound measurements but usually no additional details about the flaw like position, dimension or orientation are available. The information about these details is hidden in the recorded experimental signals. The idea of full waveform inversion is to adapt the parameters of an initial simulation model of the undamaged specimen by minimizing the discrepancy between these simulated signals and experimentally measured signals of the flawed specimen. Flaws in the structure are characterized by a change or deterioration in the material properties. Commonly, full waveform inversion is mostly applied in seismology on a larger scale to infer mechanical properties of the earth. We propose to use acoustic full waveform inversion for structural parameters to visualize the interior of the component. The method is adapted to US NDT by combining multiple similar experiments on the test component as the typical small amount of sensors is not sufficient for a successful imaging. It is shown that the combination of simulations and multiple experiments can be used to detect flaws and their position, dimension and orientation in emulated simulation cases.

Three-dimensional dynamic thermal imaging of structural flaws by dual-band infrared computed tomography

NASA Astrophysics Data System (ADS)

DelGrande, Nancy; Dolan, Kenneth W.; Durbin, Philip F.; Gorvad, Michael R.; Kornblum, B. T.; Perkins, Dwight E.; Schneberk, Daniel J.; Shapiro, Arthur B.

1993-11-01

We discuss three-dimensional dynamic thermal imaging of structural flaws using dual-band infrared (DBIR) computed tomography. Conventional (single-band) thermal imaging is difficult to interpret. It yields imprecise or qualitative information (e.g., when subsurface flaws produce weak heat flow anomalies masked by surface clutter). We use the DBIR imaging technique to clarify interpretation. We capture the time history of surface temperature difference patterns at the epoxy-glue disbond site of a flash-heated lap joint. This type of flawed structure played a significant role in causing damage to the Aloha Aircraft fuselage on the aged Boeing 737 jetliner. The magnitude of surface-temperature differences versus time for 0.1 mm air layer compared to 0.1 mm glue layer, varies from 0.2 to 1.6 degree(s)C, for simultaneously scanned front and back surfaces. The scans are taken every 42 ms from 0 to 8 s after the heat flash. By ratioing 3 - 5 micrometers and 8 - 12 micrometers DBIR images, we located surface temperature patterns from weak heat flow anomalies at the disbond site and remove the emissivity mask from surface paint of roughness variations. Measurements compare well with calculations based on TOPAX3D, a three-dimensional, finite element computer model. We combine infrared, ultrasound and x-ray imaging methods to study heat transfer, bond quality and material differences associated with the lap joint disbond site.

The Secret of Future Defeat: The Evolution of US Joint and Army Doctrine 1993-2006 and the Flawed Conception of Stability Operations

DTIC Science & Technology

2007-05-24

The Secret of Future Defeat: the Evolution of US Joint and Army Doctrine 1993-2006 and the Flawed Conception of Stability Operations A...4. TITLE AND SUBTITLE The Secret of Future Defeat: the Evolution of US Joint and 5a. CONTRACT NUMBER Army Doctrine 1993-2006 and the Flawed... The Secret of Future Defeat: the Evolution of US Joint and Army Doctrine 1993-2006 and the Flawed Conception of Stability Operations Approved by

Flaw Growth of 6Al-4V Titanium in a Freon TF Environment

NASA Technical Reports Server (NTRS)

Tiffany, C. F.; Masters, J. N.; Bixler, W. D.

1969-01-01

The plane strain threshold stress intensity and sustained stress flaw growth rates were experimentally determined for 6AI-4V S.T.A. titanium forging and weldments in environments of Freon TF at room temperature. Sustained load tests of surface flawed specimens were conducted with the experimental approach based on linear elastic fracture mechanics. It was concluded that sustained stress flaw growth rates, in conjunction with threshold stress intensities, can be used in assessing the service life of pressure vessels.

Fatigue flaw growth behavior in stiffened and unstiffened panels loaded in biaxial tension

NASA Technical Reports Server (NTRS)

Beck, E. J.

1973-01-01

The effect was investigated of biaxial loading on the flaw growth rate of 2219-T87 aluminum alloy that would be typical of Space Shuttle cryogenic tankage design. The stress distribution and stress concentration factors for several integrally stiffened panels under various loading conditions were obtained. The flaw growth behavior of both stiffened and unstiffened panels under biaxial loading conditions was determined. The effect of a complex stress state was studied by introducing flaws in fillet areas of biaxially loaded stiffened panels.

Methodological considerations and future insights for 24-hour dietary recall assessment in children.

PubMed

Foster, Emma; Bradley, Jennifer

2018-03-01

Dietary assessment has come under much criticism of late to the extent that it has been questioned whether self-reported methods of dietary assessment are worth doing at all. Widespread under-reporting of energy intake, limitations due to memory, changes to intake due to the burden of recording and social desirability bias all impact significantly on the accuracy of the dietary information collected. Under-reporting of energy intakes has long been recognized as a problem in dietary research with doubly labeled water measures of energy expenditure uncovering significant under-reporting of energy intakes across different populations and different dietary assessment methods. In this review we focus on dietary assessment with children with particular attention on the 24-hour dietary recall method. We look at the level of under-reporting of energy intakes and how this tends to change with age, gender and body mass index. We discuss potential alternatives to self-reported (or proxy-reported) dietary assessment methods with children, such as biomarkers, and how these do not enable the collection of information important to public health nutrition such as the cooking method, the mixture of foods eaten together or the context in which the food is consumed. We conclude that despite all of the challenges and flaws, the data collected using self-reported dietary assessment methods are extremely valuable. Research into dietary assessment methodology has resulted in significant increases in our understanding of the limitations of self-reported methods and progressive improvements in the accuracy of the data collected. Hence, future investment in dietary surveillance and in improving self-reported methods of intake can make vital contributions to our understanding of dietary intakes and are thus warranted. Copyright © 2017 Elsevier Inc. All rights reserved.

Stress Intensity Factor Plasticity Correction for Flaws in Stress Concentration Regions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedman, E.; Wilson, W.K.

2000-02-01

Plasticity corrections to elastically computed stress intensity factors are often included in brittle fracture evaluation procedures. These corrections are based on the existence of a plastic zone in the vicinity of the crack tip. Such a plastic zone correction is included in the flaw evaluation procedure of Appendix A to Section XI of the ASME Boiler and Pressure Vessel Code. Plasticity effects from the results of elastic and elastic-plastic explicit flaw finite element analyses are examined for various size cracks emanating from the root of a notch in a panel and for cracks located at fillet fadii. The results ofmore » these caluclations provide conditions under which the crack-tip plastic zone correction based on the Irwin plastic zone size overestimates the plasticity effect for crack-like flaws embedded in stress concentration regions in which the elastically computed stress exceeds the yield strength of the material. A failure assessment diagram (FAD) curve is employed to graphically c haracterize the effect of plasticity on the crack driving force. The Option 1 FAD curve of the Level 3 advanced fracture assessment procedure of British Standard PD 6493:1991, adjusted for stress concentration effects by a term that is a function of the applied load and the ratio of the local radius of curvature at the flaw location to the flaw depth, provides a satisfactory bound to all the FAD curves derived from the explicit flaw finite element calculations. The adjusted FAD curve is a less restrictive plasticity correction than the plastic zone correction of Section XI for flaws embedded in plastic zones at geometric stress concentrators. This enables unnecessary conservatism to be removed from flaw evaluation procedures that utilize plasticity corrections.« less

Intelligent feature selection techniques for pattern classification of Lamb wave signals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hinders, Mark K.; Miller, Corey A.

2014-02-18

Lamb wave interaction with flaws is a complex, three-dimensional phenomenon, which often frustrates signal interpretation schemes based on mode arrival time shifts predicted by dispersion curves. As the flaw severity increases, scattering and mode conversion effects will often dominate the time-domain signals, obscuring available information about flaws because multiple modes may arrive on top of each other. Even for idealized flaw geometries the scattering and mode conversion behavior of Lamb waves is very complex. Here, multi-mode Lamb waves in a metal plate are propagated across a rectangular flat-bottom hole in a sequence of pitch-catch measurements corresponding to the double crossholemore » tomography geometry. The flaw is sequentially deepened, with the Lamb wave measurements repeated at each flaw depth. Lamb wave tomography reconstructions are used to identify which waveforms have interacted with the flaw and thereby carry information about its depth. Multiple features are extracted from each of the Lamb wave signals using wavelets, which are then fed to statistical pattern classification algorithms that identify flaw severity. In order to achieve the highest classification accuracy, an optimal feature space is required but it’s never known a priori which features are going to be best. For structural health monitoring we make use of the fact that physical flaws, such as corrosion, will only increase over time. This allows us to identify feature vectors which are topologically well-behaved by requiring that sequential classes “line up” in feature vector space. An intelligent feature selection routine is illustrated that identifies favorable class distributions in multi-dimensional feature spaces using computational homology theory. Betti numbers and formal classification accuracies are calculated for each feature space subset to establish a correlation between the topology of the class distribution and the corresponding classification accuracy.« less

Fracture characteristics of structural aerospace alloys containing deep surface flaws. [aluminum-titanium alloys

NASA Technical Reports Server (NTRS)

Masters, J. N.; Bixler, W. D.; Finger, R. W.

1973-01-01

Conditions controlling the growth and fracture of deep surface flaws in aerospace alloys were investigated. Static fracture tests were performed on 7075-T651 and 2219-T87 aluminum, and 6Ai-4V STA titanium . Cyclic flaw growth tests were performed on the two latter alloys, and sustain load tests were performed on the titanium alloy. Both the cyclic and the sustain load tests were performed with and without a prior proof overload cycle to investigate possible growth retardation effects. Variables included in all test series were thickness, flaw depth-to-thickness ratio, and flaw shape. Results were analyzed and compared with previously developed data to determine the limits of applicability of available modified linear elastic fracture solutions.

Stapled haemorrhoidopexy for the treatment of haemorrhoids: a systematic review.

PubMed

Burch, J; Epstein, D; Sari, A Baba-Akbari; Weatherly, H; Jayne, D; Fox, D; Woolacott, N

2009-03-01

This systematic review aimed to evaluate the short- and long-term safety, efficacy and costs of stapled haemorrhoidopexy (SH) compared with conventional haemorrhoidectomy. We searched 26 electronic databases and websites for studies in any language up to July 2006. Inclusion criteria were predefined, and each stage of the review process was conducted in duplicate. Twenty-seven randomized controlled trials were included (n = 2279). All had some methodological flaws. Postoperatively, 19 trials (95%) reported less pain, 17 (89%) reported a shorter operating time, 14 (88%) a shorter hospital stay, and 14 (93%) a shorter convalescence time following SH. However, prolapse was significantly more common after SH (OR 3.38; 95% CI: 1.00, 11.47). In the longer term, prolapse was significantly more common after SH (OR 4.34; 95% CI: 1.67, 11.28) as was reintervention for prolapse (OR 6.78; 95% CI: 2.00, 23.00). There were no differences in the rate or type of complications. Conventional haemorrhoidectomy and SH had similar costs during the initial admission. Compared with conventional haemorrhoidectomy, SH resulted in less postoperative pain, shorter operating time, a shorter hospital stay, and a shorter convalescence, but a higher rate of prolapse and reintervention for prolapse.

Saw palmetto for the treatment of men with lower urinary tract symptoms.

PubMed

Gerber, G S

2000-05-01

A comprehensive review of the literature on the use of saw palmetto in men with lower urinary tract symptoms is provided. A literature search of studies that have assessed the mechanism of action and clinical results of saw palmetto in men with benign prostatic hyperplasia was performed. A variety of potential mechanisms of action of saw palmetto have been demonstrated through in vitro studies, including 5-alpha reductase inhibition, adrenergic receptor antagonism and intraprostatic androgen receptor blockade. Clinical evidence of the relevance of these effects is largely unavailable. The use of saw palmetto in men with benign prostatic hyperplasia is safe with no recognized adverse effects. No effect on serum prostate specific antigen has been noted. Placebo controlled trials and meta-analyses have suggested that saw palmetto leads to subjective and objective improvement in men with lower urinary tract symptoms. However, most studies are significantly limited by methodological flaws, small patient numbers and brief treatment intervals. Evidence suggests that saw palmetto may have a significant effect on urinary flow rates and symptom scores compared to placebo in men with lower urinary tract symptoms. However, large scale, placebo controlled trials are needed to assess the efficacy of saw palmetto.

Quantification technology study on flaws in steam-filled pipelines based on image processing

NASA Astrophysics Data System (ADS)

Sun, Lina; Yuan, Peixin

2009-07-01

Starting from exploiting the applied detection system of gas transmission pipeline, a set of X-ray image processing methods and pipeline flaw quantificational evaluation methods are proposed. Defective and non-defective strings and rows in gray image were extracted and oscillogram was obtained. We can distinguish defects in contrast with two gray images division. According to the gray value of defects with different thicknesses, the gray level depth curve is founded. Through exponential and polynomial fitting way to obtain the attenuation mathematical model which the beam penetrates pipeline, thus attain flaw deep dimension. This paper tests on the PPR pipe in the production of simulated holes flaw and cracks flaw, 135KV used the X-ray source on the testing. Test results show that X-ray image processing method, which meet the needs of high efficient flaw detection and provide quality safeguard for thick oil recovery, can be used successfully in detecting corrosion of insulated pipe.

Quantification technology study on flaws in steam-filled pipelines based on image processing

NASA Astrophysics Data System (ADS)

Yuan, Pei-xin; Cong, Jia-hui; Chen, Bo

2008-03-01

Starting from exploiting the applied detection system of gas transmission pipeline, a set of X-ray image processing methods and pipeline flaw quantificational evaluation methods are proposed. Defective and non-defective strings and rows in gray image were extracted and oscillogram was obtained. We can distinguish defects in contrast with two gray images division. According to the gray value of defects with different thicknesses, the gray level depth curve is founded. Through exponential and polynomial fitting way to obtain the attenuation mathematical model which the beam penetrates pipeline, thus attain flaw deep dimension. This paper tests on the PPR pipe in the production of simulated holes flaw and cracks flaw. The X-ray source tube voltage was selected as 130kv and valve current was 1.5mA.Test results show that X-ray image processing methods, which meet the needs of high efficient flaw detection and provide quality safeguard for thick oil recovery, can be used successfully in detecting corrosion of insulated pipe.

Effects of proof loads and combined mode loadings on fracture and flaw growth characteristics of aerospace alloys

NASA Technical Reports Server (NTRS)

Shah, R. C.

1974-01-01

This experimental program was undertaken to determine the effects of (1) combined tensile and bending loadings, (2) combined tensile and shear loadings, and (3) proof overloads on fracture and flaw growth characteristics of aerospace alloys. Tests were performed on four alloys: 2219-T87 aluminum, 5Al-2.5Sn (ELl) titanium, 6Al-4V beta STA titanium and high strength 4340 steel. Tests were conducted in room air, gaseous nitrogen at -200F (144K), liquid nitrogen and liquid hydrogen. Flat center cracked and surface flawed specimens, cracked tube specimens, circumferentially notched round bar and surface flawed cylindrical specimens were tested. The three-dimensional photoelastic technique of stress freezing and slicing was used to determine stress intensity factors for surface flawed cylindrical specimens subjected to tension or torsion. Results showed that proof load/temperature histories used in the tests have a small beneficial effect or no effect on subsequent fracture strength and flaw growth rates.

Application of elastic and elastic-plastic fracture mechanics methods to surface flaws

NASA Astrophysics Data System (ADS)

McCabe, Donald E.; Ernst, Hugo A.; Newman, James C., Jr.

Fuel tanks that are a part of the External Tank assembly for the Space Shuttle are made of relatively thin 2219-T87 aluminum plate. These tanks contain about 917 m of fusion weld seam, all of which is nondestructively inspected for flaws and all those found are repaired. The tanks are subsequently proof-tested to a pressure that is sufficiently severe to cause weld metal yielding in a few local regions of the weld seam. The work undertaken in the present project was to develop a capability to predict flaw growth from undetected surface flaws that are assumed to be located in the highly stressed regions. The technical challenge was to develop R-curve prediction capability for surface cracks in specimens that contain the flaws of unusual sizes and shapes deemed to be of interest. The test techniques developed and the elastic-plastic analysis concepts adopted are presented. The flaws of interest were quite small surface cracks that were narrow-deep ellipses that served to exacerbate the technical difficulties involved.

Application of elastic and elastic-plastic fracture mechanics methods to surface flaws

NASA Technical Reports Server (NTRS)

Mccabe, Donald E.; Ernst, Hugo A.; Newman, James C., Jr.

1992-01-01

Fuel tanks that are a part of the External Tank assembly for the Space Shuttle are made of relatively thin 2219-T87 aluminum plate. These tanks contain about 917 m of fusion weld seam, all of which is nondestructively inspected for flaws and all those found are repaired. The tanks are subsequently proof-tested to a pressure that is sufficiently severe to cause weld metal yielding in a few local regions of the weld seam. The work undertaken in the present project was to develop a capability to predict flaw growth from undetected surface flaws that are assumed to be located in the highly stressed regions. The technical challenge was to develop R-curve prediction capability for surface cracks in specimens that contain the flaws of unusual sizes and shapes deemed to be of interest. The test techniques developed and the elastic-plastic analysis concepts adopted are presented. The flaws of interest were quite small surface cracks that were narrow-deep ellipses that served to exacerbate the technical difficulties involved.

VIIRS reflective solar bands on-orbit calibration and performance: a three-year update

NASA Astrophysics Data System (ADS)

Sun, Junqiang; Wang, Menghua

2014-11-01

The on-orbit calibration of the reflective solar bands (RSBs) of VIIRS and the result from the analysis of the up-to-date 3 years of mission data are presented. The VIIRS solar diffuser (SD) and lunar calibration methodology are discussed, and the calibration coefficients, called F-factors, for the RSBs are given for the latest reincarnation. The coefficients derived from the two calibrations are compared and the uncertainties of the calibrations are discussed. Numerous improvements are made, with the major improvement to the calibration result come mainly from the improved bidirectional reflectance factor (BRF) of the SD and the vignetting functions of both the SD screen and the sun-view screen. The very clean results, devoid of many previously known noises and artifacts, assures that VIIRS has performed well for the three years on orbit since launch, and in particular that the solar diffuser stability monitor (SDSM) is functioning essentially without flaws. The SD degradation, or H-factors, for most part shows the expected decline except for the surprising rise on day 830 lasting for 75 days signaling a new degradation phenomenon. Nevertheless the SDSM and the calibration methodology have successfully captured the SD degradation for RSB calibration. The overall improvement has the most significant and direct impact on the ocean color products which demands high accuracy from RSB observations.

Insights, Pearls, and Guidance on Successfully Producing and Publishing Educational Research

PubMed Central

Romanelli, Frank

2016-01-01

It is the collaborative responsibility of authors, reviewers, and editors to produce high-quality manuscripts that advance knowledge and educational practice. Experience with manuscript submissions to the American Journal of Pharmaceutical Education reveal several areas for improvement that authors can make to increase their submission success rate during the review process. These improvements include research question justification, improved clarity and details regarding methodology, concise data and results, and a discussion that frames research findings in the context of what is already known. This paper summarizes common flaws we see in submitted manuscripts and makes suggestions on how to address these areas and improve publication success. PMID:27402978

Did the American Academy of Orthopaedic Surgeons osteoarthritis guidelines miss the mark?

PubMed

Bannuru, Raveendhara R; Vaysbrot, Elizaveta E; McIntyre, Louis F

2014-01-01

The American Academy of Orthopaedic Surgeons (AAOS) 2013 guidelines for knee osteoarthritis recommended against the use of viscosupplementation for failing to meet the criterion of minimum clinically important improvement (MCII). However, the AAOS's methodology contained numerous flaws in obtaining, displaying, and interpreting MCII-based results. The current state of research on MCII allows it to be used only as a supplementary instrument, not a basis for clinical decision making. The AAOS guidelines should reflect this consideration in their recommendations to avoid condemning potentially viable treatments in the context of limited available alternatives. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

[When is the prescription of prismatic eyeglasses reasonable?].

PubMed

Kommerell, G

2014-03-01

Prismatic glasses are used to deflect rays of light. In ophthalmology, prisms are mainly used to correct double vision caused by strabismus which is acquired after early childhood. In congenital or infantile strabismus, the image of the deviated eye is usually suppressed so that double vision does not occur and prismatic glasses are not indicated. Latent strabismus is very common and only rarely leads to double vision or asthenopic symptoms so that correction with prismatic glasses is only indicated in exceptional cases. The "Measuring and Correcting Methodology after H.-J. Haase" is based on flawed assumptions, and therefore can not be recommended for the prescription of prisms.

Electromagnetic hypersensitivity: The opinion of an observer neurologist

NASA Astrophysics Data System (ADS)

Marc-Vergnes, Jean-Pierre

2010-11-01

Electromagnetic hypersensitivity (EHS) is a recent, uncertain and somehow confusing concept. It is now widely agreed that people claiming to be EHS really experience symptoms. However, no evidence for a causal link between the symptoms and electromagnetic fields (EMF) has been reported. Thus, we have to wonder whether EHS constitutes truly a relevant entity. Most of the previous studies suffer from methodological flaws. Owing to the quantification of symptoms, the interdisciplinary assessment of patients, and the use of personal exposimeters, the recent studies are of better quality. A set of convergent associated signs suggests that individual neuropsychic factors take a prominent, but maybe not unique, part in this condition.

Ellipsometry-like analysis of polarization state for micro cracks using stress-induced light scattering method

NASA Astrophysics Data System (ADS)

Sakata, Yoshitaro; Terasaki, Nao; Sakai, Kazufumi; Nonaka, Kazuhiro

2016-03-01

Fine polishing techniques, such as chemical mechanical polishing (CMP), are important to glass substrate manufacturing. When these techniques involve mechanical interaction in the form of friction between the abrasive and the substrate surface during polishing, latent flaws may form on the product. Fine polishing induced latent flaws in glass substrates may become obvious during a subsequent cleaning process if the glass surface is eroded away by chemical interaction with a cleaning liquid. Thus, latent flaws reduce product yield. A novel technique (the stress-induced light scattering method; SILSM) which was combined with light scattering method and stress effects was proposed for inspecting surface to detect polishing induced latent flaws. This method is able to distinguish between latent flaws and tiny particles on the surface. In this method, an actuator deforms a sample inducing stress effects around the tip of a latent flaw caused by the deformation, which in turn changes the refractive index of the material around the tip of the latent flaw because of the photoelastic effect. A CCD camera detects this changed refractive index as variations in light-scattering intensity. In this study, the changes in reflection coefficients and polarization states after application of stress to a glass substrate were calculated and evaluated qualitatively using Jones matrix-like ellipsometry. As the results, it was shown that change in the polarization states around the tip of latent flaw were evaluated between before and after applied stress, qualitatively.

What is the enduring value of research publications in clinical epilepsy? An assessment of papers published in 1981, 1991, and 2001.

PubMed

Gregoris, Nattanit; Shorvon, Simon

2013-09-01

There has been a rapid expansion in the number of research papers published on clinical epilepsy topics and the number of journals in the medical field. In this expanding publishing environment, the question arises as to how much of the published medical literature has 'enduring value' in terms of advancing knowledge in any significant way. We developed a methodology to assess the enduring value of papers published in the field of clinical epilepsy and established its internal validity. We studied 300 research papers published in 1981, 1991, and 2001 (100 in each year) and assessed their enduring value in four domains: citations in the last year, citations in the last 10years, citations in the standard epilepsy textbook, and a subjective assessment by an experienced epileptologist. Of the 300 papers, 214 (71%) were categorized as having 'no enduring value', and only 11 (4%) were identified as having 'high enduring value'. The 'high enduring value' papers could generally be identified immediately on publication, by high initial citation values, and were also more likely to be published in journals with a high impact factor. The commonest characteristics of a paper with no enduring value were that they reported research that was inherently unimportant (55.6%), not novel (38.8%), or had significant methodological flaws (22.0%). Although there are other reasons for publishing papers, the fact that the great majority of published papers lack enduring value in terms of advancing knowledge should be a concern to the medical and scientific community. Copyright © 2013 Elsevier Inc. All rights reserved.

Epidemiology, methodological and reporting characteristics of systematic reviews of nursing interventions published in China.

PubMed

Shi, Chunhu; Zhu, Lin; Wang, Xue; Qin, Chunxia; Xu, Qi; Tian, Jinhui

2014-12-01

The importance of systematic reviews (SRs) of nursing interventions' impact on practice makes their methodological quality and reporting characteristics especially important as it directly influence their utility for clinicians, patients and policy makers.The study aims to assess the methodological quality and reporting characteristics of SRs of nursing interventions in Chinese nursing journals. Three Chinese databases were searched for SRs of nursing interventions from inception to October 2011. The assessment of multiple systematic reviews (AMSTAR) and Preferred Reporting Items for Systematic Reviews and Meta Analyses (PRISMA) statements were used to assess methodological quality and reporting characteristics. Seventy-four SRs were included. The proportion of SRs complying with AMSTAR checklist items ranged from 0% to 82.4%. No SRs reported an 'a priori' design or conflict of interest. Only four items were found to be reported in more than 50% of the SRs: a list of included and excluded studies, the scientific quality of included studies, the appropriate use of methods to combine findings, and formulating conclusions appropriately. The majority of SRs of nursing interventions in China had major methodological and reporting flaws that limited their value to guide decisions. Chinese authors and journals should adopt and keep up with the AMSTAR and PRISMA statements to improve the quality of SRs in this field. © 2014 Wiley Publishing Asia Pty Ltd.

Traditional Chinese medicine for knee osteoarthritis: An overview of systematic review.

PubMed

Yang, Min; Jiang, Li; Wang, Qing; Chen, Hao; Xu, Guihua

2017-01-01

Traditional Chinese medicine (TCM) has been accepted as a complementary therapy for knee osteoarthritis. However, the efficacy and safety of the intervention were still conflicting and uncertain. Meanwhile, the quality of methodology and evidence in the field was unknown. To summarize the characteristics and critically evaluate the quality of methodology, as well as the evidence of systematic reviews (SRs) on TCM for knee osteoarthritis. Five electronic databases were searched from inception to April 2016. The methodological quality of the included studies was assessed by AMSTAR and ROBIS. The quality of the evidence was determined using the GRADE approach. Ten SRs were included. The conclusions suggest that TCM provides potential benefits for patients with knee osteoarthritis. These benefits include pain relief, functional improvement, and presence of few adverse events. Limitations of the methodological quality mainly included the lack of a-priori protocol or protocol registration and incomprehensive literature search. A list of excluded studies was also not provided. The overall quality of evidence in the SRs was poor, ranging from "very low" to "low," mainly because of the serious risk of bias of original trials, inconsistencies, and imprecision in the outcomes. TCM generally appears to be effective for knee osteoarthritis treatment. However, the evidence is not robust enough because of the methodological flaws in SRs. Hence, these conclusions on available SRs should be treated with caution for clinical practice.

Methological quality of systematic reviews and meta-analyses on acupuncture for stroke: A review of review.

PubMed

Chen, Xin-Lin; Mo, Chuan-Wei; Lu, Li-Ya; Gao, Ri-Yang; Xu, Qian; Wu, Min-Feng; Zhou, Qian-Yi; Hu, Yue; Zhou, Xuan; Li, Xian-Tao

2017-11-01

To assess the methodological quality of systematic reviews and meta-analyses regarding acupuncture intervention for stroke and the primary studies within them. Two researchers searched PubMed, Cumulative index to Nursing and Allied Health Literature, Embase, ISI Web of Knowledge, Cochrane, Allied and Complementary Medicine, Ovid Medline, Chinese Biomedical Literature Database, China National Knowledge Infrastructure, Wanfang and Traditional Chinese Medical Database to identify systematic reviews and meta-analyses about acupuncture for stroke published from the inception to December 2016. Review characteristics and the criteria for assessing the primary studies within reviews were extracted. The methodological quality of the reviews was assessed using adapted Oxman and Guyatt Scale. The methodological quality of primary studies was also assessed. Thirty-two eligible reviews were identified, 15 in English and 17 in Chinese. The English reviews were scored higher than the Chinese reviews (P=0.025), especially in criteria for avoiding bias and the scope of search. All reviews used the quality criteria to evaluate the methodological quality of primary studies, but some criteria were not comprehensive. The primary studies, in particular the Chinese reviews, had problems with randomization, allocation concealment, blinding, dropouts and withdrawals, intent-to-treat analysis and adverse events. Important methodological flaws were found in Chinese systematic reviews and primary studies. It was necessary to improve the methodological quality and reporting quality of both the systematic reviews published in China and primary studies on acupuncture for stroke.

Epidemiology of bruxism in adults: a systematic review of the literature.

PubMed

Manfredini, Daniele; Winocur, Ephraim; Guarda-Nardini, Luca; Paesani, Daniel; Lobbezoo, Frank

2013-01-01

To perform a systematic review of the literature dealing with the prevalence of bruxism in adult populations. A systematic search of the medical literature was performed to identify all peer-reviewed English-language papers dealing with the prevalence assessment of either awake or sleep bruxism at the general population level by the adoption of questionnaires, clinical assessments, and polysomnographic (PSG) or electromyographic (EMG) recordings. Quality assessment of the reviewed papers was performed according to the Methodological evaluation of Observational REsearch (MORE) checklist, which enables the identification of flaws in the external and internal validity. Cut-off criteria for an acceptable external validity were established to select studies for the discussion of prevalence data. For each included study, the sample features, diagnostic strategy, and prevalence of bruxism in relation to age, sex, and circadian rhythm, if available, were recorded. Thirty-five publications were included in the review. Several methodological problems limited the external validity of findings in most studies, and prevalence data extraction was performed only on seven papers. Of those, only one paper had a flaw less external validity, whilst internal validity was low in all the selected papers due to their self-reported bruxism diagnosis alone, mainly based on only one or two questionnaire items. No epidemiologic data were available from studies adopting other diagnostic strategies (eg, PSG, EMG). Generically identified "bruxism" was assessed in two studies reporting an 8% to 31.4% prevalence, awake bruxism was investigated in two studies describing a 22.1% to 31% prevalence, and prevalence of sleep bruxism was found to be more consistent across the three studies investigating the report of "frequent" bruxism (12.8% ± 3.1%). Bruxism activities were found to be unrelated to sex, and a decrease with age was described in elderly people. The present systematic review described variable prevalence data for bruxism activities. Findings must be interpreted with caution due to the poor methodological quality of the reviewed literature and to potential diagnostic bias related with having to rely on an individual's self-report of bruxism.

Funding source and the quality of reports of chronic wounds trials: 2004 to 2011

PubMed Central

2014-01-01

Background Critical commentaries suggest that wound care randomised controlled trials (RCTs) are often poorly reported with many methodological flaws. Furthermore, interventions in chronic wounds, rather than being drugs, are often medical devices for which there are no requirements for RCTs to bring products to market. RCTs in wounds trials therefore potentially represent a form of marketing. This study presents a methodological overview of chronic wound trials published between 2004 and 2011 and investigates the influence of industry funding on methodological quality. Methods A systematic search for RCTs for the treatment of chronic wounds published in the English language between 2004 and 2011 (inclusive) in the Cochrane Wounds Group Specialised Register of Trials was carried out. Data were extracted on aspects of trial design, conduct and quality including sample size, duration of follow-up, specification of a primary outcome, use of surrogate outcomes, and risks of bias. In addition, the prevalence of industry funding was assessed and its influence on the above aspects of trial design, conduct and quality was assessed. Results A total of 167 RCTs met our inclusion criteria. We found chronic wound trials often have short durations of follow-up (median 12 weeks), small sample sizes (median 63), fail to define a primary outcome in 41% of cases, and those that do define a primary outcome, use surrogate measures of healing in 40% of cases. Only 40% of trials used appropriate methods of randomisation, 25% concealed allocation and 34% blinded outcome assessors. Of the included trials, 41% were wholly or partially funded by industry, 33% declared non-commercial funding and 26% did not report a funding source. Industry funding was not statistically significantly associated with any measure of methodological quality, though this analysis was probably underpowered. Conclusions This overview confirms concerns raised about the methodological quality of RCTs in wound care and illustrates that greater efforts must be made to follow international standards for conducting and reporting RCTs. There is currently minimal evidence of an influence of industry funding on methodological quality although analyses had limited power and funding source was not reported for a quarter of studies. PMID:24422753

Funding source and the quality of reports of chronic wounds trials: 2004 to 2011.

PubMed

Hodgson, Robert; Allen, Richard; Broderick, Ellen; Bland, J Martin; Dumville, Jo C; Ashby, Rebecca; Bell-Syer, Sally; Foxlee, Ruth; Hall, Jill; Lamb, Karen; Madden, Mary; O'Meara, Susan; Stubbs, Nikki; Cullum, Nicky

2014-01-14

Critical commentaries suggest that wound care randomised controlled trials (RCTs) are often poorly reported with many methodological flaws. Furthermore, interventions in chronic wounds, rather than being drugs, are often medical devices for which there are no requirements for RCTs to bring products to market. RCTs in wounds trials therefore potentially represent a form of marketing. This study presents a methodological overview of chronic wound trials published between 2004 and 2011 and investigates the influence of industry funding on methodological quality. A systematic search for RCTs for the treatment of chronic wounds published in the English language between 2004 and 2011 (inclusive) in the Cochrane Wounds Group Specialised Register of Trials was carried out.Data were extracted on aspects of trial design, conduct and quality including sample size, duration of follow-up, specification of a primary outcome, use of surrogate outcomes, and risks of bias. In addition, the prevalence of industry funding was assessed and its influence on the above aspects of trial design, conduct and quality was assessed. A total of 167 RCTs met our inclusion criteria. We found chronic wound trials often have short durations of follow-up (median 12 weeks), small sample sizes (median 63), fail to define a primary outcome in 41% of cases, and those that do define a primary outcome, use surrogate measures of healing in 40% of cases. Only 40% of trials used appropriate methods of randomisation, 25% concealed allocation and 34% blinded outcome assessors. Of the included trials, 41% were wholly or partially funded by industry, 33% declared non-commercial funding and 26% did not report a funding source. Industry funding was not statistically significantly associated with any measure of methodological quality, though this analysis was probably underpowered. This overview confirms concerns raised about the methodological quality of RCTs in wound care and illustrates that greater efforts must be made to follow international standards for conducting and reporting RCTs. There is currently minimal evidence of an influence of industry funding on methodological quality although analyses had limited power and funding source was not reported for a quarter of studies.

Flaws in Commercial Reading Materials.

ERIC Educational Resources Information Center

Axelrod, Jerome

Three flaws found in commercial reading materials, such as workbooks and kits, are discussed in this paper, and examples of the flaws are taken from specific materials. The first problem noted is that illustrations frequently provide the information that the learner is supposed to supply through phonetic or structural analysis; the illustrations…

Ductile fracture of cylindrical vessels containing a large flaw

NASA Technical Reports Server (NTRS)

Erdogan, F.; Irwin, G. R.; Ratwani, M.

1976-01-01

The fracture process in pressurized cylindrical vessels containing a relatively large flaw is considered. The flaw is assumed to be a part-through or through meridional crack. The flaw geometry, the yield behavior of the material, and the internal pressure are assumed to be such that in the neighborhood of the flaw the cylinder wall undergoes large-scale plastic deformations. Thus, the problem falls outside the range of applicability of conventional brittle fracture theories. To study the problem, plasticity considerations are introduced into the shell theory through the assumptions of fully-yielded net ligaments using a plastic strip model. Then a ductile fracture criterion is developed which is based on the concept of net ligament plastic instability. A limited verification is attempted by comparing the theoretical predictions with some existing experimental results.

ULTRASONIC FLAW DETECTION METHOD AND MEANS

DOEpatents

Worlton, D.C.

1961-08-15

A method of detecting subsurface flaws in an object using ultrasonic waves is described. An ultnasonic wave of predetermined velocity and frequency is transmitted to engage the surface of the object at a predetermined angle of inci dence thereto. The incident angle of the wave to the surface is determined with respect to phase velocity, incident wave velocity, incident wave frequency, and the estimated depth of the flaw so that Lamb waves of a particular type and mode are induced only in the portion of the object between the flaw and the surface. These Lamb waves are then detected as they leave the object at an angle of exit equal to the angle of incidence. No waves wlll be generated in the object and hence received if no flaw exists beneath the surface. (AEC)

New techniques for modeling the reliability of reactor pressure vessels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, K.I.; Simonen, F.A.; Liebetrau, A.M.

1986-01-01

In recent years several probabilistic fracture mechanics codes, including the VISA code, have been developed to predict the reliability of reactor pressure vessels. This paper describes several new modeling techniques used in a second generation of the VISA code entitled VISA-II. Results are presented that show the sensitivity of vessel reliability predictions to such factors as inservice inspection to detect flaws, random positioning of flaws within the vessel wall thickness, and fluence distributions that vary throughout the vessel. The algorithms used to implement these modeling techniques are also described. Other new options in VISA-II are also described in this paper.more » The effect of vessel cladding has been included in the heat transfer, stress, and fracture mechanics solutions in VISA-II. The algorithms for simulating flaws has been changed to consider an entire vessel rather than a single flaw in a single weld. The flaw distribution was changed to include the distribution of both flaw depth and length. A menu of several alternate equations has been included to predict the shift in RT/sub NDT/. For flaws that arrest and later re-initiate, an option was also included to allow correlating the current arrest toughness with subsequent initiation toughnesses.« less

On an image reconstruction method for ECT

NASA Astrophysics Data System (ADS)

Sasamoto, Akira; Suzuki, Takayuki; Nishimura, Yoshihiro

2007-04-01

An image by Eddy Current Testing(ECT) is a blurred image to original flaw shape. In order to reconstruct fine flaw image, a new image reconstruction method has been proposed. This method is based on an assumption that a very simple relationship between measured data and source were described by a convolution of response function and flaw shape. This assumption leads to a simple inverse analysis method with deconvolution.In this method, Point Spread Function (PSF) and Line Spread Function(LSF) play a key role in deconvolution processing. This study proposes a simple data processing to determine PSF and LSF from ECT data of machined hole and line flaw. In order to verify its validity, ECT data for SUS316 plate(200x200x10mm) with artificial machined hole and notch flaw had been acquired by differential coil type sensors(produced by ZETEC Inc). Those data were analyzed by the proposed method. The proposed method restored sharp discrete multiple hole image from interfered data by multiple holes. Also the estimated width of line flaw has been much improved compared with original experimental data. Although proposed inverse analysis strategy is simple and easy to implement, its validity to holes and line flaw have been shown by many results that much finer image than original image have been reconstructed.

Identify Structural Flaw Location and Type with an Inverse Algorithm of Resonance Inspection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Wei; Lai, Canhai; Sun, Xin

To evaluate the fitness-for-service of a structural component and to quantify its remaining useful life, aging and service-induced structural flaws must be quantitatively determined in service or during scheduled maintenance shutdowns. Resonance inspection (RI), a non-destructive evaluation (NDE) technique, distinguishes the anomalous parts from the good parts based on changes in the natural frequency spectra. Known for its numerous advantages, i.e., low inspection cost, high testing speed, and broad applicability to complex structures, RI has been widely used in the automobile industry for quality inspection. However, compared to other contemporary direct visualization-based NDE methods, a more widespread application of RImore » faces a fundamental challenge because such technology is unable to quantify the flaw details, e.g. location, dimensions, and types. In this study, the applicability of a maximum correlation-based inverse RI algorithm developed by the authors is further studied for various flaw cases. It is demonstrated that a variety of common structural flaws, i.e. stiffness degradation, voids, and cracks, can be accurately retrieved by this algorithm even when multiple different types of flaws coexist. The quantitative relations between the damage identification results and the flaw characteristics are also developed to assist the evaluation of the actual state of health of the engineering structures.« less

Does Metformin Reduce Cancer Risks? Methodologic Considerations.

PubMed

Golozar, Asieh; Liu, Shuiqing; Lin, Joeseph A; Peairs, Kimberly; Yeh, Hsin-Chieh

2016-01-01

The substantial burden of cancer and diabetes and the association between the two conditions has been a motivation for researchers to look for targeted strategies that can simultaneously affect both diseases and reduce their overlapping burden. In the absence of randomized clinical trials, researchers have taken advantage of the availability and richness of administrative databases and electronic medical records to investigate the effects of drugs on cancer risk among diabetic individuals. The majority of these studies suggest that metformin could potentially reduce cancer risk. However, the validity of this purported reduction in cancer risk is limited by several methodological flaws either in the study design or in the analysis. Whether metformin use decreases cancer risk relies heavily on the availability of valid data sources with complete information on confounders, accurate assessment of drug use, appropriate study design, and robust analytical techniques. The majority of the observational studies assessing the association between metformin and cancer risk suffer from methodological shortcomings and efforts to address these issues have been incomplete. Future investigations on the association between metformin and cancer risk should clearly address the methodological issues due to confounding by indication, prevalent user bias, and time-related biases. Although the proposed strategies do not guarantee a bias-free estimate for the association between metformin and cancer, they will reduce synthesis of and reporting of erroneous results.

Formation and ridging of flaw leads in the eastern Canadian Beaufort Sea. Special Session C06 on: “Physical, biological and biogeochemical processes associated with young thin ice types”

NASA Astrophysics Data System (ADS)

Prinsenberg, S. J.

2009-12-01

Formation and ridging of flaw leads in the eastern Canadian Beaufort Sea. Simon Prinsenberg1 and Yves Graton2 1Bedford Inst. of Oceanography, Fisheries and Oceans Canada P.O. Box1006, Dartmouth, Nova Scotia, B2Y 4A2, Canada prinsenbergs@mar.dfo-mpo.gc.ca 2Inst. National de la Recherche Scientifique-Eau, INRS-ETE University of Quebec at Quebec City, Quebec yvesgratton@eteinrs.ca During the winter of 2008, the flaw lead south of Banks Island repeatedly opened and closed representing an elongated region where periodically the large ice growth stimulates the densification of the surface layer due to salt rejection and instigates a local circulation pattern that will affect the biological processes of the region. Helicopter-borne sensors were available to monitor the aftermath of one of the rapid closing of the flaw lead into extensive elongated rubble field using a Canadian Ice breaker, CCGS Amundsen, as a logistic base. After the wind reversed a new open flaw lead 20km wide restarting a new flaw lead formation cycle. Ice thickness and surface roughness data were collected from the rubble field and adjacent open flaw lead with an Electromagnetic-Laser system. The strong wind event of April 4-5 2009 generated a large linear 1.5km wide ice rubble field up to 8-10m thick when the 60cm thick, 18km wide flaw lead was crunched into land-fast by the 1.5m thick offshore pack ice. It is expected that during rapid ice growth in a flaw lead, salt rejection increase the density of the surface water layer producing a surface depression (Low) and cyclonic circulation. In contrast at depth, the extra surface dense water produces a high in the horizontal pressure field and anti-cyclonic circulation which remains after the rapid ice growth within the flaw lead stops. One of such remnants may have been observed during the CFL-IPY winter survey.

Innovative use of the integrative review to evaluate evidence of technology transformation in healthcare.

PubMed

Phillips, Andrew B; Merrill, Jacqueline A

2015-12-01

Healthcare is in a period significant transformational activity through the accelerated adoption of healthcare technologies, new reimbursement systems that emphasize shared savings and care coordination, and the common place use of mobile technologies by patients, providers, and others. The complexity of healthcare creates barriers to transformational activity and has the potential to inhibit the desired paths toward change envisioned by policymakers. Methods for understanding how change is occurring within this complex environment are important to the evaluation of delivery system reform and the role of technology in healthcare transformation. This study examines the use on an integrative review methodology to evaluate the healthcare literature for evidence of technology transformation in healthcare. The methodology integrates the evaluation of a broad set of literature with an established evaluative framework to develop a more complete understanding of a particular topic. We applied this methodology and the framework of punctuated equilibrium (PEq) to the analysis of the healthcare literature from 2004 to 2012 for evidence of technology transformation, a time during which technology was at the forefront of healthcare policy. The analysis demonstrated that the established PEq framework applied to the literature showed considerable potential for evaluating the progress of policies that encourage healthcare transformation. Significant inhibitors to change were identified through the integrative review and categorized into ten themes that describe the resistant structure of healthcare delivery: variations in the environment; market complexity; regulations; flawed risks and rewards; change theories; barriers; ethical considerations; competition and sustainability; environmental elements, and internal elements. We hypothesize that the resistant nature of the healthcare system described by this study creates barriers to the direct consumer involvement and engagement necessary for transformational change. Future policies should be directed at removing these barriers by demanding and emphasizing open technologies and unrestricted access to data versus as currently prescribed by technology vendors, practitioners, and policies that perpetuate market equilibrium. Copyright © 2015 Elsevier Inc. All rights reserved.

Flipping the Classroom: An Empirical Study Examining Student Learning

ERIC Educational Resources Information Center

Sparks, Roland J.

2013-01-01

Flipping the classroom is the latest reported teaching technique to improve student learning at all levels. Prior studies showed significant increases in learning by employing this technique. However, an examination of the previous studies indicates significant flaws in the testing procedure controls. Moreover, most studies were based on anecdotal…

Nonlinear acoustic spectroscopy of cracked flaws and disbonds: Fundamentals, techniques, and applications

NASA Astrophysics Data System (ADS)

Maev, R. Gr.; Solodov, I. Yu.

2000-05-01

Classical nonlinear acoustics of solids operates with distributed material nonlinearity related to unharmonicity of molecular interaction forces. Weakening of molecular bonds in a defect area or intermittent lack of elastic coupling between the faces of a vibrating crack or unbond ("clapping") results in anomalously high local contact acoustic nonlinearity (CAN). CAN properties and spectral features are different from those of the classical analog and important to develop new acoustic NDE techniques. Three approaches to nonlinear NDE methodology have been experimentally verified: low-frequency (hundreds of Hz) vibration technique, intermediate-frequency (hundreds of kHz) standing wave and high-frequency (tens of MHz) propagation modes. Low-frequency nonlinear contact vibrations revealed multiple sub- and super-harmonics generation featuring non-monotonous (sinx/x type) spectra. Parametric instability observed in resonator with a nonlinear contact leads to the output spectrum splitting up into successive sub-harmonics as the wave amplitude increases. High-frequency experiments demonstrated abnormal increases in the third harmonic amplitude: 3 or 4 order enhancement of the 3-ω nonlinear parameter was measured for the nonlinear contact. The CAN spectral features in both acoustic and vibration modes were used for nonlinear NDE of simulated and realistic flaws in glass, metal welds, etc. The sensitivities of the techniques are compared and their practical applicability assessed.

Unit-Sphere Multiaxial Stochastic-Strength Model Applied to Anisotropic and Composite Materials

NASA Technical Reports Server (NTRS)

Nemeth, Noel, N.

2013-01-01

Models that predict the failure probability of brittle materials under multiaxial loading have been developed by authors such as Batdorf, Evans, and Matsuo. These "unit-sphere" models assume that the strength-controlling flaws are randomly oriented, noninteracting planar microcracks of specified geometry but of variable size. This methodology has been extended to predict the multiaxial strength response of transversely isotropic brittle materials, including polymer matrix composites (PMCs), by considering (1) flaw-orientation anisotropy, whereby a preexisting microcrack has a higher likelihood of being oriented in one direction over another direction, and (2) critical strength, or K (sub Ic) orientation anisotropy, whereby the level of critical strength or fracture toughness for mode I crack propagation, K (sub Ic), changes with regard to the orientation of the microstructure. In this report, results from finite element analysis of a fiber-reinforced-matrix unit cell were used with the unit-sphere model to predict the biaxial strength response of a unidirectional PMC previously reported from the World-Wide Failure Exercise. Results for nuclear-grade graphite materials under biaxial loading are also shown for comparison. This effort was successful in predicting the multiaxial strength response for the chosen problems. Findings regarding stress-state interactions and failure modes also are provided.

Remotely Telling Humans and Computers Apart: An Unsolved Problem

NASA Astrophysics Data System (ADS)

Hernandez-Castro, Carlos Javier; Ribagorda, Arturo

The ability to tell humans and computers apart is imperative to protect many services from misuse and abuse. For this purpose, tests called CAPTCHAs or HIPs have been designed and put into production. Recent history shows that most (if not all) can be broken given enough time and commercial interest: CAPTCHA design seems to be a much more difficult problem than previously thought. The assumption that difficult-AI problems can be easily converted into valid CAPTCHAs is misleading. There are also some extrinsic problems that do not help, especially the big number of in-house designs that are put into production without any prior public critique. In this paper we present a state-of-the-art survey of current HIPs, including proposals that are now into production. We classify them regarding their basic design ideas. We discuss current attacks as well as future attack paths, and we also present common errors in design, and how many implementation flaws can transform a not necessarily bad idea into a weak CAPTCHA. We present examples of these flaws, using specific well-known CAPTCHAs. In a more theoretical way, we discuss the threat model: confronted risks and countermeasures. Finally, we introduce and discuss some desirable properties that new HIPs should have, concluding with some proposals for future work, including methodologies for design, implementation and security assessment.

Security analysis of standards-driven communication protocols for healthcare scenarios.

PubMed

Masi, Massimiliano; Pugliese, Rosario; Tiezzi, Francesco

2012-12-01

The importance of the Electronic Health Record (EHR), that stores all healthcare-related data belonging to a patient, has been recognised in recent years by governments, institutions and industry. Initiatives like the Integrating the Healthcare Enterprise (IHE) have been developed for the definition of standard methodologies for secure and interoperable EHR exchanges among clinics and hospitals. Using the requisites specified by these initiatives, many large scale projects have been set up for enabling healthcare professionals to handle patients' EHRs. The success of applications developed in these contexts crucially depends on ensuring such security properties as confidentiality, authentication, and authorization. In this paper, we first propose a communication protocol, based on the IHE specifications, for authenticating healthcare professionals and assuring patients' safety. By means of a formal analysis carried out by using the specification language COWS and the model checker CMC, we reveal a security flaw in the protocol thus demonstrating that to simply adopt the international standards does not guarantee the absence of such type of flaws. We then propose how to emend the IHE specifications and modify the protocol accordingly. Finally, we show how to tailor our protocol for application to more critical scenarios with no assumptions on the communication channels. To demonstrate feasibility and effectiveness of our protocols we have fully implemented them.

PROBLEMS OF RADIOLOGICAL PROTECTION IN FLAW DETECTION (in Polish)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Domanus, J.; Wolski, M.

1962-01-01

All industrial flaw detection laboratories are covered, with respect to their radiological protection, by the supervision of the Inst. of Electrotechnics. A discussion is given of the results of this action, especially the cases of exceeding the admissible doses. The analysis of endangerment by radiation of employees of flaw detection laboratories is given. (auth)

Does the Detection of Misunderstanding Lead to Its Revision?

ERIC Educational Resources Information Center

García-Rodicio, Héctor; Sánchez, Emilio

2014-01-01

When dealing with complex conceptual systems, low-prior- knowledge learners develop fragmentary and incorrect understanding. To learn complex topics deeply, these learners have to (a) monitor understanding to detect flaws and (b) generate explanations to revise and repair the flaws. In this research we explored if the detection of a flaw in…

Development of an Inverse Algorithm for Resonance Inspection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lai, Canhai; Xu, Wei; Sun, Xin

2012-10-01

Resonance inspection (RI), which employs the natural frequency spectra shift between the good and the anomalous part populations to detect defects, is a non-destructive evaluation (NDE) technique with many advantages such as low inspection cost, high testing speed, and broad applicability to structures with complex geometry compared to other contemporary NDE methods. It has already been widely used in the automobile industry for quality inspections of safety critical parts. Unlike some conventionally used NDE methods, the current RI technology is unable to provide details, i.e. location, dimension, or types, of the flaws for the discrepant parts. Such limitation severely hindersmore » its wide spread applications and further development. In this study, an inverse RI algorithm based on maximum correlation function is proposed to quantify the location and size of flaws for a discrepant part. A dog-bone shaped stainless steel sample with and without controlled flaws are used for algorithm development and validation. The results show that multiple flaws can be accurately pinpointed back using the algorithms developed, and the prediction accuracy decreases with increasing flaw numbers and decreasing distance between flaws.« less

A Theoretical Model for Predicting Fracture Strength and Critical Flaw Size of the ZrB2-ZrC Composites at High Temperatures

NASA Astrophysics Data System (ADS)

Wang, Ruzhuan; Li, Xiaobo; Wang, Jing; Jia, Bi; Li, Weiguo

2018-06-01

This work shows a new rational theoretical model for quantitatively predicting fracture strength and critical flaw size of the ZrB2-ZrC composites at different temperatures, which is based on a new proposed temperature dependent fracture surface energy model and the Griffith criterion. The fracture model takes into account the combined effects of temperature and damage terms (surface flaws and internal flaws) with no any fitting parameters. The predictions of fracture strength and critical flaw size of the ZrB2-ZrC composites at high temperatures agree well with experimental data. Then using the theoretical method, the improvement and design of materials are proposed. The proposed model can be used to predict the fracture strength, find the critical flaw and study the effects of microstructures on the fracture mechanism of the ZrB2-ZrC composites at high temperatures, which thus could become a potential convenient, practical and economical technical means for predicting fracture properties and material design.

Low frequency acoustic microscope

DOEpatents

Khuri-Yakub, Butrus T.

1986-11-04

A scanning acoustic microscope is disclosed for the detection and location of near surface flaws, inclusions or voids in a solid sample material. A focused beam of acoustic energy is directed at the sample with its focal plane at the subsurface flaw, inclusion or void location. The sample is scanned with the beam. Detected acoustic energy specularly reflected and mode converted at the surface of the sample and acoustic energy reflected by subsurface flaws, inclusions or voids at the focal plane are used for generating an interference signal which is processed and forms a signal indicative of the subsurface flaws, inclusions or voids.

Fracture mechanics. [review of fatigue crack propagation and technology of constructing safe structures

NASA Technical Reports Server (NTRS)

Hardrath, H. F.

1974-01-01

Fracture mechanics is a rapidly emerging discipline for assessing the residual strength of structures containing flaws due to fatigue, corrosion or accidental damage and for anticipating the rate of which such flaws will propagate if not repaired. The discipline is also applicable in the design of structures with improved resistance to such flaws. The present state of the design art is reviewed using this technology to choose materials, to configure safe and efficient structures, to specify inspection procedures, to predict lives of flawed structures and to develop reliability of current and future airframes.

Characterizing the effects of cladding on semi-elliptical longitudinal surface flaws in cylindrical vessels subjected to internal pressure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Killian, D.E.; Yoon, K.K.

1996-12-01

Flaws on the inside surface of cladded reactor vessels are often analyzed by modelling the carbon steel base metal without consideration of a layer of stainless steel cladding material, thus ignoring the effects of this bimetallic discontinuity. Adding cladding material to the inside surface of a finite element model of a vessel raises concerns regarding adequate mesh refinement in the vicinity of the base metal/cladding interface. This paper presents results of three-dimensional linear stress analysis that has been performed to obtain stress intensity factors for clad and unclad reactor vessels subjected to internal pressure loading. The study concentrates on semi-ellipticalmore » longitudinal surface flaws with a 6 to 1 length-to-depth ratio and flaw depths of 1/8 and 1/4 of the base metal thickness. Various meshing schemes are evaluated for modelling the crack front profile, with particular emphasis on the region near the inside surface and at the base metal/cladding interface. The shape of the crack front profile through the cladding layer and the number of finite elements used to discretize the cladding thickness are found to have a significant influence on typical fracture mechanic measures of the crack tip stress fields. Results suggest that the stress intensity factor at the inner surface of a cladded vessel may be affected as much by the finite element mesh near the surface as by the material discontinuity between the two parts of the structure.« less

Ultrasonic, microwave, and millimeter wave inspection techniques for adhesively bonded stacked open honeycomb core composites

NASA Astrophysics Data System (ADS)

Thomson, Clint D.; Cox, Ian; Ghasr, Mohammad Tayeb Ahmed; Ying, Kuang P.; Zoughi, Reza

2015-03-01

Honeycomb sandwich composites are used extensively in the aerospace industry to provide stiffness and thickness to lightweight structures. A common fabrication method for thick, curved sandwich structures is to stack and bond multiple honeycomb layers prior to machining core curvatures. Once bonded, each adhesive layer must be inspected for delaminations and the presence of unwanted foreign materials. From a manufacturing and cost standpoint, it can be advantageous to inspect the open core prior to face sheet closeout in order to reduce end-article scrap rates. However, by nature, these honeycomb sandwich composite structures are primarily manufactured from low permittivity and low loss materials making detection of delamination and some of the foreign materials (which also are low permittivity and low loss) quite challenging in the microwave and millimeter wave regime. Likewise, foreign materials such as release film in adhesive layers can be sufficiently thin as to not cause significant attenuation in through-transmission ultrasonic signals, making them difficult to detect. This paper presents a collaborative effort intended to explore the efficacy of different non-contact NDI techniques for detecting flaws in a stacked open fiberglass honeycomb core panel. These techniques primarily included air-coupled through-transmission ultrasonics, single-sided wideband synthetic aperture microwave and millimeter-wave imaging, and lens-focused technique. The goal of this investigation has been to not only evaluate the efficacy of these techniques, but also to determine their unique advantages and limitations for evaluating parameters such as flaw type, flaw size, and flaw depth.

Critical flaw size in silicon nitride ball bearings

NASA Astrophysics Data System (ADS)

Levesque, George Arthur

Aircraft engine and bearing manufacturers have been aggressively pursuing advanced materials technology systems solutions to meet main shaft-bearing needs of advanced military aircraft engines. Ceramic silicon nitride hybrid bearings are being developed for such high performance applications. Though silicon nitride exhibits many favorable properties such as high compressive strength, high hardness, a third of the density of steel, low coefficient of thermal expansion, and high corrosion and temperature resistance, they also have low fracture toughness and are susceptible to failure from fatigue spalls emanating from pre-existing surface flaws that can grow under rolling contact fatigue (RCF). Rolling elements and raceways are among the most demanding components in aircraft engines due to a combination of high cyclic contact stresses, long expected component lifetimes, corrosive environment, and the high consequence of fatigue failure. The cost of these rolling elements increases exponentially with the decrease in allowable flaw size for service applications. Hence the range of 3D non-planar surface flaw geometries subject to RCF is simulated to determine the critical flaw size (CFS) or the largest allowable flaw that does not grow under service conditions. This dissertation is a numerical and experimental investigation of surface flaws in ceramic balls subjected to RCF and has resulted in the following analyses: Crack Shape Determination: the nucleation of surface flaws from ball impact that occurs during the manufacturing process is simulated. By examining the subsurface Hertzian stresses between contacting spheres, their applicability to predicting and characterizing crack size and shape is established. It is demonstrated that a wide range of cone and partial cone cracks, observed in practice, can be generated using the proposed approaches. RCF Simulation: the procedure and concerns in modeling nonplanar 3D cracks subject to RCF using FEA for stress intensity factor (SIF) trends observed from parametrically varying different physical effects are plotted and discussed. Included are developments in contact algorithms for 3D nonplanar cracks, meshing of nonplanar cracks for SIFs, parametric studies via MATLAB and other subroutines in python and FORTRAN. Establishing Fracture Parameters: the fracture toughness, K c, is determined by using numerical techniques on experimental tests namely the Brazilian disc test and a novel compression test on an indented ball. The fatigue threshold for mixed-mode loading, Keff, is determined by using a combination of numerical modeling and results from the V-ring single ball RCF test. CFS Determination: the range of 3D non-planar surface flaw geometries subject to RCF are simulated to calculate mixed mode SIFs to determine the critical flaw size, or the largest allowable flaw that does not grow under service conditions. The CFS results are presented as a function of Hertzian contact stress, traction magnitude, and crack size. Empirical Equations: accurate empirical equations (response functions) for the KI, KII, and K III SIFs for semi-elliptical surface cracks subjected to RCF as a function of the contact patch diameter, angle of crack to the surface, max pressure, position along the crack front, and aspect ratio of the crack are developed via parametric 3D FEA. Statistical Probability of Failure: since the variability in mechanical properties for brittle materials is high a probabilistic investigation of variations in flaw size, flaw orientation, fracture toughness, and Hertzian load on failure probability is conducted to statistically determine the probability of ball failure for an existing flaw subjected to the service conditions. (Full text of this dissertation may be available via the University of Florida Libraries web site. Please check http://www.uflib.ufl.edu/etd.html)

Reactor Pressure Vessel Fracture Analysis Capabilities in Grizzly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Benjamin; Backman, Marie; Chakraborty, Pritam

2015-03-01

Efforts have been underway to develop fracture mechanics capabilities in the Grizzly code to enable it to be used to perform deterministic fracture assessments of degraded reactor pressure vessels (RPVs). Development in prior years has resulted a capability to calculate -integrals. For this application, these are used to calculate stress intensity factors for cracks to be used in deterministic linear elastic fracture mechanics (LEFM) assessments of fracture in degraded RPVs. The -integral can only be used to evaluate stress intensity factors for axis-aligned flaws because it can only be used to obtain the stress intensity factor for pure Mode Imore » loading. Off-axis flaws will be subjected to mixed-mode loading. For this reason, work has continued to expand the set of fracture mechanics capabilities to permit it to evaluate off-axis flaws. This report documents the following work to enhance Grizzly’s engineering fracture mechanics capabilities for RPVs: • Interaction Integral and -stress: To obtain mixed-mode stress intensity factors, a capability to evaluate interaction integrals for 2D or 3D flaws has been developed. A -stress evaluation capability has been developed to evaluate the constraint at crack tips in 2D or 3D. Initial verification testing of these capabilities is documented here. • Benchmarking for axis-aligned flaws: Grizzly’s capabilities to evaluate stress intensity factors for axis-aligned flaws have been benchmarked against calculations for the same conditions in FAVOR. • Off-axis flaw demonstration: The newly-developed interaction integral capabilities are demon- strated in an application to calculate the mixed-mode stress intensity factors for off-axis flaws. • Other code enhancements: Other enhancements to the thermomechanics capabilities that relate to the solution of the engineering RPV fracture problem are documented here.« less

Probabilistic Estimation of Critical Flaw Sizes in the Primary Structure Welds of the Ares I-X Launch Vehicle

NASA Technical Reports Server (NTRS)

Pai, Shantaram S.; Hoge, Peter A.; Patel, B. M.; Nagpal, Vinod K.

2009-01-01

The primary structure of the Ares I-X Upper Stage Simulator (USS) launch vehicle is constructed of welded mild steel plates. There is some concern over the possibility of structural failure due to welding flaws. It was considered critical to quantify the impact of uncertainties in residual stress, material porosity, applied loads, and material and crack growth properties on the reliability of the welds during its pre-flight and flight. A criterion--an existing maximum size crack at the weld toe must be smaller than the maximum allowable flaw size--was established to estimate the reliability of the welds. A spectrum of maximum allowable flaw sizes was developed for different possible combinations of all of the above listed variables by performing probabilistic crack growth analyses using the ANSYS finite element analysis code in conjunction with the NASGRO crack growth code. Two alternative methods were used to account for residual stresses: (1) The mean residual stress was assumed to be 41 ksi and a limit was set on the net section flow stress during crack propagation. The critical flaw size was determined by parametrically increasing the initial flaw size and detecting if this limit was exceeded during four complete flight cycles, and (2) The mean residual stress was assumed to be 49.6 ksi (the parent material s yield strength) and the net section flow stress limit was ignored. The critical flaw size was determined by parametrically increasing the initial flaw size and detecting if catastrophic crack growth occurred during four complete flight cycles. Both surface-crack models and through-crack models were utilized to characterize cracks in the weld toe.

Techniques for increasing boron fiber fracture strain

NASA Technical Reports Server (NTRS)

Dicarlo, J. A.

1977-01-01

Improvement in the strain-to-failure of CVD boron fibers is shown possible by contracting the tungsten boride core region and its inherent flaws. The results of three methods are presented in which etching and thermal processing techniques were employed to achieve core flaw contraction by internal stresses available in the boron sheath. After commercially and treatment induced surface flaws were removed from 203 micrometers (8 mil) fibers, the core flaw was observed to be essentially the only source of fiber fracture. Thus, fiber strain-to-failure was found to improve by an amount equal to the treatment induced contraction on the core flaw. Commercial feasibility considerations suggest as the most cost effective technique that method in which as-produced fibers are given a rapid heat treatment above 700 C. Preliminary results concerning the contraction kinetics and fracture behavior observed are presented and discussed both for high vacuum and argon gas heat treatment environments.

NON-DESTRUCTIVE FLAW DETECTION APPARATUS

DOEpatents

Stateman, M.J.; Holloway, H.R.

1957-12-17

An apparatus is described for the non-destructive detection of flaws in electrical conducting articles. The particular feature of the detection apparatus is that a flaw in the front or back of the test article will not be masked by signals caused by the passage of the end and front of the article through the detection apparatus. The present invention alleviates the above problem by mounting detection coils on directly opposite sides of the test passageway so that the axes of the pickup coils are perpendicular to the axis of an energizing coil through which the article is passed. A flaw in the article will cause a change in the voltage induced in one pickup coil, but passage of the end or front of the article will not produce unequal signals. The signals are compared in appropriate electrical circuitry to actuate a recorder only when unequal signals are present, indicating the presence of a flaw.

Optimizing Probability of Detection Point Estimate Demonstration

NASA Technical Reports Server (NTRS)

Koshti, Ajay M.

2017-01-01

Probability of detection (POD) analysis is used in assessing reliably detectable flaw size in nondestructive evaluation (NDE). MIL-HDBK-18231and associated mh18232POD software gives most common methods of POD analysis. Real flaws such as cracks and crack-like flaws are desired to be detected using these NDE methods. A reliably detectable crack size is required for safe life analysis of fracture critical parts. The paper provides discussion on optimizing probability of detection (POD) demonstration experiments using Point Estimate Method. POD Point estimate method is used by NASA for qualifying special NDE procedures. The point estimate method uses binomial distribution for probability density. Normally, a set of 29 flaws of same size within some tolerance are used in the demonstration. The optimization is performed to provide acceptable value for probability of passing demonstration (PPD) and achieving acceptable value for probability of false (POF) calls while keeping the flaw sizes in the set as small as possible.

Understanding nutritional epidemiology and its role in policy.

PubMed

Satija, Ambika; Yu, Edward; Willett, Walter C; Hu, Frank B

2015-01-01

Nutritional epidemiology has recently been criticized on several fronts, including the inability to measure diet accurately, and for its reliance on observational studies to address etiologic questions. In addition, several recent meta-analyses with serious methodologic flaws have arrived at erroneous or misleading conclusions, reigniting controversy over formerly settled debates. All of this has raised questions regarding the ability of nutritional epidemiologic studies to inform policy. These criticisms, to a large degree, stem from a misunderstanding of the methodologic issues of the field and the inappropriate use of the drug trial paradigm in nutrition research. The exposure of interest in nutritional epidemiology is human diet, which is a complex system of interacting components that cumulatively affect health. Consequently, nutritional epidemiology constantly faces a unique set of challenges and continually develops specific methodologies to address these. Misunderstanding these issues can lead to the nonconstructive and sometimes naive criticisms we see today. This article aims to clarify common misunderstandings of nutritional epidemiology, address challenges to the field, and discuss the utility of nutritional science in guiding policy by focusing on 5 broad questions commonly asked of the field. © 2015 American Society for Nutrition.

Directed Design of Experiments for Validating Probability of Detection Capability of NDE Systems (DOEPOD)

NASA Technical Reports Server (NTRS)

Generazio, Edward R.

2015-01-01

Directed Design of Experiments for Validating Probability of Detection Capability of NDE Systems (DOEPOD) Manual v.1.2 The capability of an inspection system is established by applications of various methodologies to determine the probability of detection (POD). One accepted metric of an adequate inspection system is that there is 95% confidence that the POD is greater than 90% (90/95 POD). Design of experiments for validating probability of detection capability of nondestructive evaluation (NDE) systems (DOEPOD) is a methodology that is implemented via software to serve as a diagnostic tool providing detailed analysis of POD test data, guidance on establishing data distribution requirements, and resolving test issues. DOEPOD demands utilization of observance of occurrences. The DOEPOD capability has been developed to provide an efficient and accurate methodology that yields observed POD and confidence bounds for both Hit-Miss or signal amplitude testing. DOEPOD does not assume prescribed POD logarithmic or similar functions with assumed adequacy over a wide range of flaw sizes and inspection system technologies, so that multi-parameter curve fitting or model optimization approaches to generate a POD curve are not required. DOEPOD applications for supporting inspector qualifications is included.

How effective is the plain packaging of tobacco policy on rates of intention to quit smoking and changing attitudes to smoking?

PubMed

Lilic, Nick; Stretton, Matthew; Prakash, Minesh

2018-06-05

The aim of this study is to critically appraise the evidence for the effectiveness of the plain packaging of tobacco products policy. A systematic approach to a literature review was undertaken using five databases: PubMed, MEDLINE, Google Scholar, Global Health and Legacy Tobacco Documents Library. Quantitative and qualitative studies that evaluate attitudes towards smoking, starting smoking and quitting intentions when plain packaging use is compared with standard cigarette packaging use were included. A total of 1923 studies were identified. After inclusion and exclusion criteria were applied, nine studies were included in the review. The overall quality of the data was variable but a significant number of the studies had major methodological flaws. However, data analysed in the literature review suggest that exposure to plain packaging increases intention to quit amongst exposed individuals, increases negative attitudes to both smoking and starting smoking. Although the evidence for plain packaging of tobacco is not strong, the evidence that is available indicates that it is an effective tobacco cessation policy. © 2018 Royal Australasian College of Surgeons.

Efficacy and safety of novel antipsychotics: a critical review.

PubMed

Balestrieri, Matteo; Vampini, Claudio; Bellantuono, Cesario

2000-10-01

Efficacy and safety of novel antipsychotic (AP) drugs (amisulpride, olanzapine, quetiapine, ziprasidone and zotepine) have been reviewed. Data on their antipsychotic efficacy and side effects profile have been evaluated only on the basis of controlled trials so far published. Overall, all these drugs have shown an antipsychotic efficacy on positive symptoms of schizophrenia similar to that of the conventional AP drugs. On negative symptoms, all novel AP drugs, except quetiapine and ziprasidone, demonstrated a better efficacy than haloperidol. Long-term efficacy of these AP drugs in the maintenance treatment of schizophrenia needs to be explored by further, better-designed, epidemiological studies. The safety profile shows that the novel AP drugs are generally well-tolerated and induce significantly less acute extrapyramidal side effects in comparison with haloperidol. Some methodological flaws in the experimental design of the clinical trials analysed are discussed. Although these novel AP drugs have potential clinical advantages, a number of relevant questions still remain to be addressed, in order to establish the impact of these drugs in the overall treatment of schizophrenia. Copyright 2000 John Wiley & Sons, Ltd.

Effects of Interfacial Translation-rotation Coupling for Confined Ferrofluids

NASA Astrophysics Data System (ADS)

Fang, Angbo

2011-03-01

Ferrofluids have wide applications ranging from semiconductor fabrications to biomedical processes. The hydrodynamic spin diffusion theory for ferrofluids has been successful in explaining many experimental data, but it suffers from some fatal flaws. For example, it fails to predict the incorrect flow direction for a ferrofluid confined in a concentric cylinder channel in the presence of a rotating magnetic field. In this work we develop a method to establish the general hydrodynamic boundary conditions (BCs) for micro-polar fluids such as ferrofluids. Through a dynamic generalization of the mesoscopic diffuse interface model, we are able to obtain the surface dissipation functional, in which the interfacial translation-rotation coupling plays a significant role. The generalized hydrodynamic BCs can be obtained straightforwardly by using Onsager's variational approach. The resulted velocity profile and other quantities compares well with the experimental data, strikingly different from traditional theories. The methodology can be applied to study the hydrodynamic behavior of other structured fluids in confined channels or multi-phase flows. The work is supported by a research award made by the King Abdullah University of Science and Technology.

Significant issues in proof testing: A critical appraisal

NASA Technical Reports Server (NTRS)

Chell, G. G.; Mcclung, R. C.; Russell, D. A.; Chang, K. J.; Donnelly, B.

1994-01-01

Issues which impact on the interpretation and quantification of proof test benefits are reviewed. The importance of each issue in contributing to the extra quality assurance conferred by proof testing components is discussed, particularly with respect to the application of advanced fracture mechanics concepts to enhance the flaw screening capability of a proof test analysis. Items covered include the role in proof testing of elastic-plastic fracture mechanics, ductile instability analysis, deterministic versus probabilistic analysis, single versus multiple cycle proof testing, and non-destructive examination (NDE). The effects of proof testing on subsequent service life are reviewed, particularly with regard to stress redistribution and changes in fracture behavior resulting from the overload. The importance of proof test conditions are also addressed, covering aspects related to test temperature, simulation of service environments, test media and the application of real-time NDE. The role of each issue in a proof test methodology is assessed with respect to its ability to: promote proof test practice to a state-of-the-art; aid optimization of proof test design; and increase awareness and understanding of outstanding issues.

The effect of hand-hygiene interventions on infectious disease-associated absenteeism in elementary schools: A systematic literature review.

PubMed

Wang, Zhangqi; Lapinski, Maria; Quilliam, Elizabeth; Jaykus, Lee-Ann; Fraser, Angela

2017-06-01

Hand-hygiene interventions are widely used in schools but their effect on reducing absenteeism is not well known. The aim of our literature review was to determine whether implementation of a hand-hygiene intervention reduced infectious disease-associated absenteeism in elementary schools. The eligible studies (N = 19), published between 1996 and 2014, were summarized and the methodologic quality of each was assessed. Our review indicated evidence is available to show hand-hygiene interventions had an effect on reducing acute gastrointestinal illness-associated absenteeism but inadequate evidence is available to show an effect on respiratory illness-associated absenteeism. The methodologic quality assessment of eligible studies revealed common design flaws, such as lack of randomization, blinding, and attrition, which must be addressed in future studies to strengthen the evidence base on the effect of hand-hygiene interventions on school absenteeism. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

[Coronary artery disease--relevance of total coronary revascularization on the incidence of malignant arrhythmias].

PubMed

Brandt, A; Gulba, D C

2006-12-01

Myocardial ischemia induces redistribution of different ions (H(+), K(+), Na(+), Ca(++)) across the cardiomyocyte membrane, as well as the loss of intracellular ATP content. This results in changes in the electrical properties including shortening of the action potential, appearance of delayed afterpotentials, and a modified refractoriness of the cardiomyocyte. These changes may induce or support malignant cardiac arrhythmias. Supersensitivity of sympathetic denervated myocardium may further support the electrical instability of ischemic myocardium.Virtues of studies indicate that patients with coronary artery disease who develop complex arrhythmias during or after exercise bear a substantially increased risk for sudden cardiac death. Other studies report about arrhythmic stabilization and reduced mortality if patients with reversible myocardial ischemia receive complete revascularization. However, none of these studies is without methodological flaws. Due to the lack of methodologically sound studies in sufficiently large patient cohorts, the question whether complete coronary revascularisation improves the prognosis of patients with coronary artery disease and which strategy (medical, interventional, or surgical) warrants the best outcomes remains open.

A novel methodology for in-process monitoring of flow forming

NASA Astrophysics Data System (ADS)

Appleby, Andrew; Conway, Alastair; Ion, William

2017-10-01

Flow forming (FF) is an incremental cold working process with near-net-shape forming capability. Failures by fracture due to high deformation can be unexpected and sometimes catastrophic, causing tool damage. If process failures can be identified in real time, an automatic cut-out could prevent costly tool damage. Sound and vibration monitoring is well established and commercially viable in the machining sector to detect current and incipient process failures, but not for FF. A broad-frequency microphone was used to record the sound signature of the manufacturing cycle for a series of FF parts. Parts were flow formed using single and multiple passes, and flaws were introduced into some of the parts to simulate the presence of spontaneously initiated cracks. The results show that this methodology is capable of identifying both introduced defects and spontaneous failures during flow forming. Further investigation is needed to categorise and identify different modes of failure and identify further potential applications in rotary forming.

The SACE Review Panel's Final Report: Significant Flaws in the Analysis of Statistical Data

ERIC Educational Resources Information Center

Gregory, Kelvin

2006-01-01

The South Australian Certificate of Education (SACE) is a credential and formal qualification within the Australian Qualifications Framework. A recent review of the SACE outlined a number of recommendations for significant changes to this certificate. These recommendations were the result of a process that began with the review panel…

Methodological quality of randomized controlled trials of spinal manipulation and mobilization in tension-type headache, migraine, and cervicogenic headache.

PubMed

Fernández-de-las-Peñas, César; Alonso-Blanco, Cristina; San-Roman, Jesús; Miangolarra-Page, Juan C

2006-03-01

Literature review of quality of clinical trials. To determine the methodological quality of published randomized controlled trials that used spinal manipulation and/or mobilization to treat patients with tension-type headache (TTH), cervicogenic headache (CeH), and migraine (M) in the last decade. TTH, CeH, and M are the most prevalent types of headaches seen in adults. Individuals who have headaches frequently use physical therapy, manual therapy, or chiropractic care. Randomized controlled trials are considered an optimal method with which to assess the efficacy of any intervention. Computerized literature searches were performed in MEDLINE, EMBASE, COCHRANE, AMED, MANTIS, CINHAL, and PEDro databases. Randomized controlled trials in which spinal manipulation and/or mobilization had been used for TTH, CeH, and M published in a peer-reviewed journal as full text, and with at least 1 clinically relevant outcome measure (ie, headache intensity, duration, or frequency) were reviewed. The methodological quality of the studies was assessed independently by 2 reviewers using a set of predefined criteria. Only 8 studies met all the inclusion criteria. One clinical trial evaluated spinal manipulation and mobilization together, and the remaining 7 assessed spinal manipulative therapy. No controlled trials analyzing exclusively the effects of spinal mobilization were found. Methodological scores ranged from 35 to 56 points out of a theoretical maximum of 100 points, indicating an overall poor methodology of the studies. Only 2 studies obtained a high-quality score (greater than 50 points). No significant differences in quality scores were found based on the type of headache investigated. Methodological quality was not associated with the year of publication (before 2000, or later) nor with the results (positive, neutral, negative) reported in the studies. The most common flaws were a small sample size, the absence of a placebo control group, lack of blinded patients, and no description of the manipulative procedure. There are few published randomized controlled trials analyzing the effectiveness of spinal manipulation and/or mobilization for TTH, CeH, and M in the last decade. In addition, the methodological quality of these papers is typically low. Clearly, there is a need for high-quality randomized controlled trials assessing the effectiveness of these interventions in these headache disorders.

A New Merit Function for Evaluating the Flaw Tolerance of Composite Laminates. Pt. 2; Arbitrary Size Holes and Center Cracks

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr.; Sumpter, Rod

1999-01-01

In a previous paper, a new merit function for determining the strength performance of flawed composite laminates was presented. This previous analysis was restricted to circular hole flaws that were large enough that failure could be predicted using the laminate stress concentration factor. In this paper, the merit function is expanded to include the flaw cases of an arbitrary size circular hole or a center crack. Failure prediction for these cases is determined using the point stress criterion. An example application of the merit function is included for a wide range of graphite/epoxy laminates.

A New Merit Function for Evaluating the Flaw Tolerance of Composite Laminates. Part 2; Arbitrary Size Holes and Center Cracks

NASA Technical Reports Server (NTRS)

Martin, Mikulas M., Jr.; Sumpter, Rod

2000-01-01

In a previous paper, a new merit function for determining the strength performance of flawed composite laminates was presented. This previous analysis was restricted to circular hole flaws that were large enough that failure could be predicted using the laminate stress concentration factor. In this paper, the merit function is expanded to include the flaw cases of an arbitrary size circular hole or center crack. Failure prediction for these cases is determined using the point stress criterion. An example application of the merit function is included for a wide range of graphite/epoxy laminates.

A New Merit Function for Evaluating the Flaw Tolerance of Composite Laminates. Part 2; Arbitrary Size Holes and Center Cracks

NASA Technical Reports Server (NTRS)

Mikulas, Martin M., Jr.; Sumpter, Rod

1997-01-01

In a previous paper, a new merit function for determining the strength performance of flawed composite laminates was presented. This previous analysis was restricted to circular hole flaws that were large enough that failure could be predicted using the laminate stress concentration factor. In this paper, the merit function is expanded to include the flaw cases of an arbitrary size circular hole or a center crack. Failure prediction for these cases is determined using the point stress criterion. An example application of the merit function is included for a wide range of graphite/epoxy laminates.

The detection of flaws in austenitic welds using the decomposition of the time-reversal operator

NASA Astrophysics Data System (ADS)

Cunningham, Laura J.; Mulholland, Anthony J.; Tant, Katherine M. M.; Gachagan, Anthony; Harvey, Gerry; Bird, Colin

2016-04-01

The non-destructive testing of austenitic welds using ultrasound plays an important role in the assessment of the structural integrity of safety critical structures. The internal microstructure of these welds is highly scattering and can lead to the obscuration of defects when investigated by traditional imaging algorithms. This paper proposes an alternative objective method for the detection of flaws embedded in austenitic welds based on the singular value decomposition of the time-frequency domain response matrices. The distribution of the singular values is examined in the cases where a flaw exists and where there is no flaw present. A lower threshold on the singular values, specific to austenitic welds, is derived which, when exceeded, indicates the presence of a flaw. The detection criterion is successfully implemented on both synthetic and experimental data. The datasets arising from welds containing a flaw are further interrogated using the decomposition of the time-reversal operator (DORT) method and the total focusing method (TFM), and it is shown that images constructed via the DORT algorithm typically exhibit a higher signal-to-noise ratio than those constructed by the TFM algorithm.

The detection of flaws in austenitic welds using the decomposition of the time-reversal operator

PubMed Central

Cunningham, Laura J.; Mulholland, Anthony J.; Gachagan, Anthony; Harvey, Gerry; Bird, Colin

2016-01-01

The non-destructive testing of austenitic welds using ultrasound plays an important role in the assessment of the structural integrity of safety critical structures. The internal microstructure of these welds is highly scattering and can lead to the obscuration of defects when investigated by traditional imaging algorithms. This paper proposes an alternative objective method for the detection of flaws embedded in austenitic welds based on the singular value decomposition of the time-frequency domain response matrices. The distribution of the singular values is examined in the cases where a flaw exists and where there is no flaw present. A lower threshold on the singular values, specific to austenitic welds, is derived which, when exceeded, indicates the presence of a flaw. The detection criterion is successfully implemented on both synthetic and experimental data. The datasets arising from welds containing a flaw are further interrogated using the decomposition of the time-reversal operator (DORT) method and the total focusing method (TFM), and it is shown that images constructed via the DORT algorithm typically exhibit a higher signal-to-noise ratio than those constructed by the TFM algorithm. PMID:27274683

Fatigue life prediction of bonded primary joints

NASA Technical Reports Server (NTRS)

Knauss, J. F.

1979-01-01

The validation of a proposed fatigue life prediction methodology was sought through the use of aluminum butt and scarf joint and graphite/epoxy butt joint specimens in a constant amplitude fatigue environment. The structural properties of the HYSOL 9313 adhesive system were obtained by mechanical test of molded heat adhesive specimens. Aluminum contoured double cantilever beam specimens were used to generate crack velocity versus stress intensity factor data. The specific objectives were: (1) to ascertain the feasibility of predicting fatigue failure of an adhesive in a primary bonded composite structure by incorporating linear elastic crack growth behavior; and (2) to ascertain if acoustic emission and/or compliance measurement techniques can be used to detect flaws.

‘Irresponsible and a Disservice’: The integrity of social psychology turns on the free will dilemma

PubMed Central

Miles, James B

2013-01-01

Over the last few years, a number of works have been published asserting both the putative prosocial benefits of belief in free will and the possible dangers of disclosing doubts about the existence of free will. Although concerns have been raised over the disservice of keeping such doubts from the public, this does not highlight the full danger that is presented by social psychology's newly found interest in the ‘hard problem’ of human free will. Almost all of the work on free will published to date by social psychologists appears methodologically flawed, misrepresents the state of academic knowledge, and risks linking social psychology with the irrational. PMID:22074173

Does post-exercise massage treatment reduce delayed onset muscle soreness? A systematic review

PubMed Central

Ernst, E.

1998-01-01

BACKGROUND: Delayed onset muscle soreness (DOMS) is a frequent problem after unaccustomed exercise. No universally accepted treatment exists. Massage therapy is often recommended for this condition but uncertainty exists about its effectiveness. AIM: To determine whether post-exercise massage alleviates the symptoms of DOMS after a bout of strenuous exercise. METHOD: Various computerised literature searches were carried out and located seven controlled trials. RESULTS: Most of the trials were burdened with serious methodological flaws, and their results are far from uniform. However, most suggest that post-exercise massage may alleviate symptoms of DOMS. CONCLUSIONS: Massage therapy may be a promising treatment for DOMS. Definitive studies are warranted. 


 PMID:9773168

Maintaining rigor in research: flaws in a recent study and a reanalysis of the relationship between state abortion laws and maternal mortality in Mexico.

PubMed

Darney, Blair G; Saavedra-Avendano, Biani; Lozano, Rafael

2017-01-01

A recent publication [Koch E, Chireau M, Pliego F, Stanford J, Haddad S, Calhoun B, Aracena P, Bravo M, Gatica S, Thorp J. Abortion legislation, maternal healthcare, fertility, female literacy, sanitation, violence against women and maternal deaths: a natural experiment in 32 Mexican states. BMJ Open 2015;5(2):e006013] claimed that Mexican states with more restrictive abortion laws had lower levels of maternal mortality. Our objectives are to replicate the analysis, reanalyze the data and offer a critique of the key flaws of the Koch study. We used corrected maternal mortality data (2006-2013), live births, and state-level indicators of poverty. We replicate the published analysis. We then reclassified state-level exposure to abortion on demand based on actual availability of abortion (Mexico City versus the other 31 states) and test the association of abortion access and the maternal mortality ratio (MMR) using descriptives over time, pooled chi-square tests and regression models. We included 256 state-year observations. We did not find significant differences in MMR between Mexico City (MMR=49.1) and the 31 states (MMR=44.6; p=.44). Using Koch's classification of states, we replicated published differences of higher MMR where abortion is more available. We found a significant, negative association between MMR and availability of abortion in the same multivariable models as Koch, but using our state classification (beta=-22.49, 95% CI=-38.9; -5.99). State-level poverty remains highly correlated with MMR. Koch makes errors in methodology and interpretation, making false causal claims about abortion law and MMR. MMR is falling most rapidly in Mexico City, but our main study limitation is an inability to draw causal inference about abortion law or access and maternal mortality. We need rigorous evidence about the health impacts of increasing access to safe abortion worldwide. Transparency and integrity in research is crucial, as well as perhaps even more in politically contested topics such as abortion. Rigorous evidence about the health impacts of increasing access to safe abortion worldwide is needed. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Ultrasonic flaw detection in a monorail box beam

NASA Astrophysics Data System (ADS)

Zheng, Peng; Greve, David W.; Oppenheim, Irving J.

2009-03-01

A steel box beam in a monorail application is constructed with an epoxy grout wearing surface, precluding visual inspection of its top flange. This paper describes a sequence of experimental research tasks to develop an ultrasonic system to detect flaws (such as fatigue cracks) in that flange, and the results of a field test to demonstrate system performance. The problem is constrained by the fact that the flange is exposed only along its longitudinal edges, and by the fact that permanent installation of transducers at close spacing was deemed to be impractical. The system chosen for development, after experimental comparison of alternate technologies, features angle-beam ultrasonic transducers with fluid coupling to the flange edge; the emitting transducers create transverse waves that travel diagonally across the width of the flange, where an array of receiving transducers detect flaw reflections and flaw shadows. The system rolls along the box beam, surveying (screening) the top flange for the presence of flaws. In a first research task, conducted on a full-size beam specimen, we compared waves generated from different transducer locations, either the flange edge or the web face, and at different frequency ranges. At relatively low frequencies, such as 100 kHz, we observed Lamb wave modes, and at higher frequency, in the MHz range, we observed nearlylongitudinal waves with trailing pulses. In all cases we observed little attenuation by the wearing surface and little influence of reflection at the web-flange joints. At the conclusion of this task we made the design decision to use edgemounted transducers at relatively high frequency, with correspondingly short wavelength, for best scattering from flaws. In a second research task we conducted experiments at 55% scale on a steel plate, with machined flaws of different size, and detected flaws of target size for the intended application. We then compared the performance of bonded transducers, fluid-coupled transducers, and angle-beam (wedge) transducers; from that comparison we made the design decision to use wedges, which beam the wave to increase the scattering from flaws. We also compared the performance of wired transducers using fluid coupling to that of wireless (inductively coupled) transducers mounted permanently. Although the wireless transducers achieved flaw detection, the necessary spacing (determined experimentally) would have required an impractical number of transducers. Therefore, we made the design decision to use wedge transducers with fluid coupling. In a third research task we developed and tested a rolling system with a water channel for acoustic coupling, including a study of its sensitivity to misalignment, and in a fourth task we devised a data display to create a pattern of reflections or shadows that could be easily interpreted as evidence of a flaw. Finally, we conducted a field test on the full-size system in a region containing bolt holes, which act as a physical simulation of a flaw, and show successful detection of reflections and shadows from those holes.

Traditional Chinese medicine for knee osteoarthritis: An overview of systematic review

PubMed Central

Wang, Qing; Chen, Hao

2017-01-01

Background Traditional Chinese medicine (TCM) has been accepted as a complementary therapy for knee osteoarthritis. However, the efficacy and safety of the intervention were still conflicting and uncertain. Meanwhile, the quality of methodology and evidence in the field was unknown. Objective To summarize the characteristics and critically evaluate the quality of methodology, as well as the evidence of systematic reviews (SRs) on TCM for knee osteoarthritis. Methods Five electronic databases were searched from inception to April 2016. The methodological quality of the included studies was assessed by AMSTAR and ROBIS. The quality of the evidence was determined using the GRADE approach. Results Ten SRs were included. The conclusions suggest that TCM provides potential benefits for patients with knee osteoarthritis. These benefits include pain relief, functional improvement, and presence of few adverse events. Limitations of the methodological quality mainly included the lack of a-priori protocol or protocol registration and incomprehensive literature search. A list of excluded studies was also not provided. The overall quality of evidence in the SRs was poor, ranging from “very low” to “low,” mainly because of the serious risk of bias of original trials, inconsistencies, and imprecision in the outcomes. Conclusions TCM generally appears to be effective for knee osteoarthritis treatment. However, the evidence is not robust enough because of the methodological flaws in SRs. Hence, these conclusions on available SRs should be treated with caution for clinical practice. PMID:29267324

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chattopadhyay, J.; Dutta, B.K.; Kushwaha, H.S.

Leak-Before-Break (LBB) is being used to design the primary heat transport piping system of 500 MWe Indian Pressurized Heavy Water Reactors (IPHWR). The work is categorized in three directions to demonstrate three levels of safety against sudden catastrophic break. Level 1 is inherent in the design procedure of piping system as per ASME Sec.III with a well defined factor of safety. Level 2 consists of fatigue crack growth study of a postulated part-through flaw at the inside surface of pipes. Level 3 is stability analysis of a postulated leakage size flaw under the maximum credible loading condition. Developmental work relatedmore » to demonstration of level 2 and level 3 confidence is described in this paper. In a case study on fatigue crack growth on PHT straight pipes for level 2, negligible crack growth is predicted for the life of the reactor. For level 3 analysis, the R6 method has been adopted. A database to evaluate SIF of elbows with throughwall flaws under combined internal pressure and bending moment has been generated to provide one of the inputs for R6 method. The methodology of safety assessment of elbow using R6 method has been demonstrated for a typical pump discharge elbow. In this analysis, limit load of the cracked elbow has been determined by carrying out elasto-plastic finite element analysis. The limit load results compared well with those given by Miller. However, it requires further study to give a general form of limit load solution. On the experimental front, a set of small diameter pipe fracture experiments have been carried out at room temperature and 300{degrees}C. Two important observations of the experiments are - appreciable drop in maximum load at 300{degrees}C in case of SS pipes and out-of-plane crack growth in case of CS pipes. Experimental load deflection curves are finally compared with five J-estimation schemes predictions. A material database of PHT piping materials is also being generated for use in LBB analysis.« less

Analysis of SBIR phase I and phase II review results at the National Institutes of Health.

PubMed

Vener, K J; Calkins, B M

1991-09-01

A cohort of phase I and phase II summary statements for the SBIR grant applications was evaluated to determine the strengths and weaknesses in approved and disapproved applications. An analysis of outcome variables (disapproval or unfunded status) was examined with respect to exposure variables (strengths or shortcomings). Logistic regression models were developed for comparisons to measure the predictive value of shortcomings and strengths to the outcomes. Disapproved phase I results were compared with an earlier 1985 study. Although the magnitude of the frequencies of shortcomings was greater in the present study, the relative rankings within shortcoming class were more alike than different. Also, the frequencies of shortcomings were, with one exception, not significantly different in the two studies. Differences in the summary statement review may have accounted for some differences observed between the 1985 data and results of the present study. Comparisons of Approved/Disapproved and Approved-Unfunded/Funded yielded the following observations. For phase I applicants, a lack of a clearly stated, testable hypothesis, a poorly qualified or described investigative team, and inadequate methodological approaches contributed significantly (in that order) to a rating of disapproval. A critical flaw for phase II proposals was failure to accomplish objectives of the phase I study. Methodological issues also dominate the distinctions in both comparison groups. A clear result of the data presented here and that published previously is that SBIR applicants need continuing assistance to improve the chances of their success. These results should serve as a guide to assist NIH staff as they provide information to prospective applicants focusing on key elements of the application. A continuing review of the SBIR program would be helpful to evaluate the quality of the submitted science.

Determination of Flaw Size and Depth From Temporal Evolution of Thermal Response

NASA Technical Reports Server (NTRS)

Winfree, William P.; Zalameda, Joseph N.; Cramer, Elliott; Howell, Patricia A.

2015-01-01

Simple methods for reducing the pulsed thermographic responses of flaws have tended to be based on either the spatial or temporal response. This independent assessment limits the accuracy of characterization. A variational approach is presented for reducing the thermographic data to produce an estimated size for a flaw that incorporates both the temporal and spatial response to improve the characterization. The size and depth are determined from both the temporal and spatial thermal response of the exterior surface above a flaw and constraints on the length of the contour surrounding the delamination. Examples of the application of the technique to simulation and experimental data acquired are presented to investigate the limitations of the technique.

Eddy current probe response to open and closed surface flaws

NASA Technical Reports Server (NTRS)

Auld, B. A.; Muennemann, F.; Winslow, D. K.

1981-01-01

A general analysis of eddy current response to certain types of open and closed surface flaws is presented for both standard low-frequency and ferromagnetic-resonance (FMR) probes. It is shown analytically that for two-dimensional and three-dimensional surface flaws interrogated by a uniform probe field, the crack opening sensitivity increases with the operating frequency of the probe, this behavior being due to the Faraday induction effect. Experiments with low-frequency probes operating at or below 1 MHz and with the FMR probe operating at approximately 1000 MHz confirm this increase of the crack mouth opening displacement for practical situations where the probe field is not uniform in the vicinity of the flaw.

Estimating probable flaw distributions in PWR steam generator tubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gorman, J.A.; Turner, A.P.L.

1997-02-01

This paper describes methods for estimating the number and size distributions of flaws of various types in PWR steam generator tubes. These estimates are needed when calculating the probable primary to secondary leakage through steam generator tubes under postulated accidents such as severe core accidents and steam line breaks. The paper describes methods for two types of predictions: (1) the numbers of tubes with detectable flaws of various types as a function of time, and (2) the distributions in size of these flaws. Results are provided for hypothetical severely affected, moderately affected and lightly affected units. Discussion is provided regardingmore » uncertainties and assumptions in the data and analyses.« less

Surgical interventions for gastric cancer: a review of systematic reviews.

PubMed

He, Weiling; Tu, Jian; Huo, Zijun; Li, Yuhuang; Peng, Jintao; Qiu, Zhenwen; Luo, Dandong; Ke, Zunfu; Chen, Xinlin

2015-01-01

To evaluate methodological quality and the extent of concordance among meta-analysis and/or systematic reviews on surgical interventions for gastric cancer (GC). A comprehensive search of PubMed, Medline, EMBASE, the Cochrane library and the DARE database was conducted to identify the reviews comparing different surgical interventions for GC prior to April 2014. After applying included criteria, available data were summarized and appraised by the Oxman and Guyatt scale. Fifty six reviews were included. Forty five reviews (80.4%) were well conducted, with scores of adapted Oxman and Guyatt scale ≥ 14. The reviews differed in criteria for avoiding bias and assessing the validity of the primary studies. Many primary studies displayed major methodological flaws, such as randomization, allocation concealment, and dropouts and withdrawals. According to the concordance assessment, laparoscopy-assisted gastrectomy (LAG) was superior to open gastrectomy, and laparoscopy-assisted distal gastrectomy was superior to open distal gastrectomy in short-term outcomes. However, the concordance regarding other surgical interventions, such as D1 vs. D2 lymphadenectomy, and robotic gastrectomy vs. LAG were absent. Systematic reviews on surgical interventions for GC displayed relatively high methodological quality. The improvement of methodological quality and reporting was necessary for primary studies. The superiority of laparoscopic over open surgery was demonstrated. But concordance on other surgical interventions was rare, which needed more well-designed RCTs and systematic reviews.

Integrated material state awareness system with self-learning symbiotic diagnostic algorithms and models

NASA Astrophysics Data System (ADS)

Banerjee, Sourav; Liu, Lie; Liu, S. T.; Yuan, Fuh-Gwo; Beard, Shawn

2011-04-01

Materials State Awareness (MSA) goes beyond traditional NDE and SHM in its challenge to characterize the current state of material damage before the onset of macro-damage such as cracks. A highly reliable, minimally invasive system for MSA of Aerospace Structures, Naval structures as well as next generation space systems is critically needed. Development of such a system will require a reliable SHM system that can detect the onset of damage well before the flaw grows to a critical size. Therefore, it is important to develop an integrated SHM system that not only detects macroscale damages in the structures but also provides an early indication of flaw precursors and microdamages. The early warning for flaw precursors and their evolution provided by an SHM system can then be used to define remedial strategies before the structural damage leads to failure, and significantly improve the safety and reliability of the structures. Thus, in this article a preliminary concept of developing the Hybrid Distributed Sensor Network Integrated with Self-learning Symbiotic Diagnostic Algorithms and Models to accurately and reliably detect the precursors to damages that occur to the structure are discussed. Experiments conducted in a laboratory environment shows potential of the proposed technique.

Eddy-Current-Based Nondestructive Inspection System Using Superconducting Quantum Interference Device for Thin Copper Tubes

NASA Astrophysics Data System (ADS)

Hatsukade, Yoshimi; Kosugi, Akifumi; Mori, Kazuaki; Tanaka, Saburo

2004-11-01

An eddy-current-based nondestructive inspection (NDI) system using superconducting quantum interference device (SQUID) cooled using a coaxial pulse tube cryocooler was constructed for the inspection of microflaws on copper tubes employing a high-Tc SQUID gradiometer and a Helmholtz-like coil inducer. The detection of artificial flaws several tens of μm in depth on copper tubes 6.35 mm in outer diameter and 0.825 mm in thickness was demonstrated using the SQUID-NDI system. With an excitation field of 1.6 μT at 5 kHz, a 30-μm-depth flaw was successfully detected by the system at an SN ratio of at least 20. The magnetic signal amplitude due to the flaw was proportional to both excitation frequency and the square of flaw depth. With consideration of the system’s sensitivity, the results indicate that sub-10-μm-depth flaws are detectable by the SQUID-NDI system.

Steam generator tube integrity flaw acceptance criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochet, B.

1997-02-01

The author discusses the establishment of a flaw acceptance criteria with respect to flaws in steam generator tubing. The problem is complicated because different countries take different approaches to the problem. The objectives in general are grouped in three broad areas: to avoid the unscheduled shutdown of the reactor during normal operation; to avoid tube bursts; to avoid excessive leak rates in the event of an accidental overpressure event. For each degradation mechanism in the tubes it is necessary to know answers to an array of questions, including: how well does NDT testing perform against this problem; how rapidly doesmore » such degradation develop; how well is this degradation mechanism understood. Based on the above information it is then possible to come up with a policy to look at flaw acceptance. Part of this criteria is a schedule for the frequency of in-service inspection and also a policy for when to plug flawed tubes. The author goes into a broad discussion of each of these points in his paper.« less

Detection of fatigue cracks by nondestructive testing methods

NASA Technical Reports Server (NTRS)

Anderson, R. T.; Delacy, T. J.; Stewart, R. C.

1973-01-01

The effectiveness was assessed of various NDT methods to detect small tight cracks by randomly introducing fatigue cracks into aluminum sheets. The study included optimizing NDT methods calibrating NDT equipment with fatigue cracked standards, and evaluating a number of cracked specimens by the optimized NDT methods. The evaluations were conducted by highly trained personnel, provided with detailed procedures, in order to minimize the effects of human variability. These personnel performed the NDT on the test specimens without knowledge of the flaw locations and reported on the flaws detected. The performance of these tests was measured by comparing the flaws detected against the flaws present. The principal NDT methods utilized were radiographic, ultrasonic, penetrant, and eddy current. Holographic interferometry, acoustic emission monitoring, and replication methods were also applied on a reduced number of specimens. Generally, the best performance was shown by eddy current, ultrasonic, penetrant and holographic tests. Etching provided no measurable improvement, while proof loading improved flaw detectability. Data are shown that quantify the performances of the NDT methods applied.

Chinese Classical Formula Sijunzi Decoction and Chronic Atrophic Gastritis: Evidence for Treatment Approach?

PubMed Central

Xu, Aili; Du, Hongbo

2017-01-01

Objective This aim is to evaluate the effect of Sijunzi decoction (SJZD) treating chronic atrophic gastritis (CAG). Methods We performed searches in seven databases. The randomized controlled trials (RCTs) comparing SJZD with standard medical care or inactive intervention for CAG were enrolled. Combined therapy of SJZD plus conventional therapies compared with conventional therapies alone was also retrieved. The primary outcome included the incidence of gastric cancer and the improvement of atrophy, intestinal metaplasia, and dysplasia based on the gastroscopy and pathology. The secondary outcomes were Helicobacter pylori clearance rate, quality of life, and adverse event/adverse drug reaction. Results Six RCTs met the inclusion criteria. The research quality was low in the trials. For the overall effect rate, pooled analysis from 4 trials showed that modified SJZD plus conventional medications exhibited a significant improvement (OR = 4.86; 95% CI: 2.80 to 8.44; P < 0.00001) and without significant heterogeneity compared with the conventional medications alone. None reported the adverse effect. Conclusions Modified SJZD combined with conventional western medicines appears to have benefits for CAG. Due to the limited number and methodological flaw, the beneficial and harmful effects of SJZD for CAG could not be identified. More high-quality clinical trials are needed to confirm the results. PMID:29138645

Effectiveness of aquatic exercise and balneotherapy: a summary of systematic reviews based on randomized controlled trials of water immersion therapies.

PubMed

Kamioka, Hiroharu; Tsutani, Kiichiro; Okuizumi, Hiroyasu; Mutoh, Yoshiteru; Ohta, Miho; Handa, Shuichi; Okada, Shinpei; Kitayuguchi, Jun; Kamada, Masamitsu; Shiozawa, Nobuyoshi; Honda, Takuya

2010-01-01

The objective of this review was to summarize findings on aquatic exercise and balneotherapy and to assess the quality of systematic reviews based on randomized controlled trials. Studies were eligible if they were systematic reviews based on randomized clinical trials (with or without a meta-analysis) that included at least 1 treatment group that received aquatic exercise or balneotherapy. We searched the following databases: Cochrane Database Systematic Review, MEDLINE, CINAHL, Web of Science, JDream II, and Ichushi-Web for articles published from the year 1990 to August 17, 2008. We found evidence that aquatic exercise had small but statistically significant effects on pain relief and related outcome measures of locomotor diseases (eg, arthritis, rheumatoid diseases, and low back pain). However, long-term effectiveness was unclear. Because evidence was lacking due to the poor methodological quality of balneotherapy studies, we were unable to make any conclusions on the effects of intervention. There were frequent flaws regarding the description of excluded RCTs and the assessment of publication bias in several trials. Two of the present authors independently assessed the quality of articles using the AMSTAR checklist. Aquatic exercise had a small but statistically significant short-term effect on locomotor diseases. However, the effectiveness of balneotherapy in curing disease or improving health remains unclear.

Design Manual for Impact Damage Tolerant Aircraft Structure. Addendum

DTIC Science & Technology

1988-03-01

Effective Flaw Size 20 22 Effective Flaws for Cubical Fragments Impacting Graphite/Epoxy Laminates 21 23 Effective Flaws for Aligned and Tumbled Armour ... armour -piercing projectiles impact, penetrate, and traverse a fuel tank and generate intensive pressure waves that act on the fuel tank. Since...eg. aerodynamic smoothnessflutter, etc.) and the repai concept (eag boiled repar external bonded pateh. flush scar bonded patch, etc., and (3) dhe

NDE detectability of fatigue-type cracks in high-strength alloys: NDI reliability assessments

NASA Technical Reports Server (NTRS)

Christner, Brent K.; Long, Donald L.; Rummel, Ward D.

1988-01-01

This program was conducted to generate quantitative flaw detection capability data for the nondestructive evaluation (NDE) techniques typically practiced by aerospace contractors. Inconel 718 and Haynes 188 alloy test specimens containing fatigue flaws with a wide distribution of sizes were used to assess the flaw detection capabilities at a number of contractor and government facilities. During this program 85 inspection sequences were completed presenting a total of 20,994 fatigue cracks to 53 different inspectors. The inspection sequences completed included 78 liquid penetrant, 4 eddy current, and 3 ultrasonic evaluations. The results of the assessment inspections are presented and discussed. In generating the flaw detection capability data base, procedures for data collection, data analysis, and specimen care and maintenance were developed, demonstrated, and validated. The data collection procedures and methods that evolved during this program for the measurement of flaw detection capabilities and the effects of inspection variables on performance are discussed. The Inconel 718 and Haynes 188 test specimens that were used in conducting this program and the NDE assessment procedures that were demonstrated, provide NASA with the capability to accurately assess the flaw detection capabilities of specific inspection procedures being applied or proposed for use on current and future fracture control hardware program.

Using Frankencerts for Automated Adversarial Testing of Certificate Validation in SSL/TLS Implementations.

PubMed

Brubaker, Chad; Jana, Suman; Ray, Baishakhi; Khurshid, Sarfraz; Shmatikov, Vitaly

2014-01-01

Modern network security rests on the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols. Distributed systems, mobile and desktop applications, embedded devices, and all of secure Web rely on SSL/TLS for protection against network attacks. This protection critically depends on whether SSL/TLS clients correctly validate X.509 certificates presented by servers during the SSL/TLS handshake protocol. We design, implement, and apply the first methodology for large-scale testing of certificate validation logic in SSL/TLS implementations. Our first ingredient is "frankencerts," synthetic certificates that are randomly mutated from parts of real certificates and thus include unusual combinations of extensions and constraints. Our second ingredient is differential testing: if one SSL/TLS implementation accepts a certificate while another rejects the same certificate, we use the discrepancy as an oracle for finding flaws in individual implementations. Differential testing with frankencerts uncovered 208 discrepancies between popular SSL/TLS implementations such as OpenSSL, NSS, CyaSSL, GnuTLS, PolarSSL, MatrixSSL, etc. Many of them are caused by serious security vulnerabilities. For example, any server with a valid X.509 version 1 certificate can act as a rogue certificate authority and issue fake certificates for any domain, enabling man-in-the-middle attacks against MatrixSSL and GnuTLS. Several implementations also accept certificate authorities created by unauthorized issuers, as well as certificates not intended for server authentication. We also found serious vulnerabilities in how users are warned about certificate validation errors. When presented with an expired, self-signed certificate, NSS, Safari, and Chrome (on Linux) report that the certificate has expired-a low-risk, often ignored error-but not that the connection is insecure against a man-in-the-middle attack. These results demonstrate that automated adversarial testing with frankencerts is a powerful methodology for discovering security flaws in SSL/TLS implementations.

Using Frankencerts for Automated Adversarial Testing of Certificate Validation in SSL/TLS Implementations

PubMed Central

Brubaker, Chad; Jana, Suman; Ray, Baishakhi; Khurshid, Sarfraz; Shmatikov, Vitaly

2014-01-01

Modern network security rests on the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols. Distributed systems, mobile and desktop applications, embedded devices, and all of secure Web rely on SSL/TLS for protection against network attacks. This protection critically depends on whether SSL/TLS clients correctly validate X.509 certificates presented by servers during the SSL/TLS handshake protocol. We design, implement, and apply the first methodology for large-scale testing of certificate validation logic in SSL/TLS implementations. Our first ingredient is “frankencerts,” synthetic certificates that are randomly mutated from parts of real certificates and thus include unusual combinations of extensions and constraints. Our second ingredient is differential testing: if one SSL/TLS implementation accepts a certificate while another rejects the same certificate, we use the discrepancy as an oracle for finding flaws in individual implementations. Differential testing with frankencerts uncovered 208 discrepancies between popular SSL/TLS implementations such as OpenSSL, NSS, CyaSSL, GnuTLS, PolarSSL, MatrixSSL, etc. Many of them are caused by serious security vulnerabilities. For example, any server with a valid X.509 version 1 certificate can act as a rogue certificate authority and issue fake certificates for any domain, enabling man-in-the-middle attacks against MatrixSSL and GnuTLS. Several implementations also accept certificate authorities created by unauthorized issuers, as well as certificates not intended for server authentication. We also found serious vulnerabilities in how users are warned about certificate validation errors. When presented with an expired, self-signed certificate, NSS, Safari, and Chrome (on Linux) report that the certificate has expired—a low-risk, often ignored error—but not that the connection is insecure against a man-in-the-middle attack. These results demonstrate that automated adversarial testing with frankencerts is a powerful methodology for discovering security flaws in SSL/TLS implementations. PMID:25404868

Cigarette Graphic Warning Labels and Smoking Prevalence in Canada: A Critical Examination and Reformulation of the FDA Regulatory Impact Analysis

PubMed Central

Huang, Jidong; Chaloupka, Frank J.; Fong, Geoffrey T.

2014-01-01

Background The estimated effect of cigarette graphic warning labels (GWLs) on smoking rates is a key input to FDA's regulatory impact analysis (RIA), required by law as part of its rulemaking process. However, evidence on the impact of GWLs on smoking prevalence is scarce. Objective The goal of this paper is to critically analyze FDA's approach to estimating the impact of GWLs on smoking rates in its RIA, and to suggest a path forward to estimating the impact of the adoption of GWLs in Canada on Canadian national adult smoking prevalence. Methods A quasi-experimental methodology was employed to examine the impact of adoption of GWLs in Canada in 2000, using the U.S. as a control. Findings We found a statistically significant reduction in smoking rates after the adoption of GWLs in Canada in comparison to the U.S. Our analyses show that implementation of GWLs in Canada reduced smoking rates by 2.87 to 4.68 percentage points, a relative reduction of 12.1 to 19.6% — 33 to 53 times larger than FDA's estimates of a 0.088 percentage point reduction. We also demonstrated that FDA's estimate of the impact was flawed because it is highly sensitive to the changes in variable selection, model specification, and the time period analyzed. Conclusions Adopting GWLs on cigarette packages reduces smoking prevalence. Applying our analysis of the Canadian GWLs, we estimate that if the U.S. had adopted GWLs in 2012, the number of adult smokers in the U.S. would have decreased by 5.3 to 8.6 million in 2013. Our analysis demonstrates that FDA's approach to estimating the impact of GWLs on smoking rates is flawed. Rectifying these problems before this approach becomes the norm is critical for FDA's effective regulation of tobacco products. PMID:24218057

Finite Element Modeling of the Thermographic Inspection for Composite Materials

NASA Technical Reports Server (NTRS)

Bucinell, Ronald B.

1996-01-01

The performance of composite materials is dependent on the constituent materials selected, material structural geometry, and the fabrication process. Flaws can form in composite materials as a result of the fabrication process, handling in the manufacturing environment, and exposure in the service environment to anomalous activity. Often these flaws show no indication on the surface of the material while having the potential of substantially degrading the integrity of the composite structure. For this reason it is important to have available inspection techniques that can reliably detect sub-surface defects such as inter-ply disbonds, inter-ply cracks, porosity, and density changes caused by variations in fiber volume content. Many non-destructive evaluation techniques (NDE) are capable of detecting sub-surface flaws in composite materials. These include shearography, video image correlation, ultrasonic, acoustic emissions, and X-ray. The difficulty with most of these techniques is that they are time consuming and often difficult to apply to full scale structures. An NDE technique that appears to have the capability to quickly and easily detect flaws in composite structure is thermography. This technique uses heat to detect flaws. Heat is applied to the surface of a structure with the use of a heat lamp or heat gun. A thermographic camera is then pointed at the surface and records the surface temperature as the composite structure cools. Flaws in the material will cause the thermal-mechanical material response to change. Thus, the surface over an area where a flaw is present will cool differently than regions where flaws do not exist. This paper discusses the effort made to thermo-mechanically model the thermography process. First the material properties and physical parameters used in the model will be explained. This will be followed by a detailed discussion of the finite element model used. Finally, the result of the model will be summarized along with recommendations for future work.

Fatigue Analysis of the Piston Rod in a Kaplan Turbine Based on Crack Propagation under Unsteady Hydraulic Loads

NASA Astrophysics Data System (ADS)

Liu, X.; Y Luo, Y.; Wang, Z. W.

2014-03-01

As an important component of the blade-control system in Kaplan turbines, piston rods are subjected to fluctuating forces transferred by the turbines blades from hydraulic pressure oscillations. Damage due to unsteady hydraulic loads might generate unexpected down time and high repair cost. In one running hydropower plant, the fracture failure of the piston rod was found twice at the same location. With the transient dynamic analysis, the retainer ring structure of the piston rod existed a relative high stress concentration. This predicted position of the stress concentration agreed well with the actual fracture position in the plant. However, the local strain approach was not able to explain why this position broke frequently. Since traditional structural fatigue analyses use a local stress strain approach to assess structural integrity, do not consider the effect of flaws which can significantly degrade structural life. Using linear elastic fracture mechanism (LEFM) approaches that include the effect of flaws is becoming common practice in many industries. In this research, a case involving a small semi-ellipse crack was taken into account at the stress concentration area, crack growth progress was calculated by FEM. The relationship between crack length and remaining life was obtained. The crack propagation path approximately agreed with the actual fracture section. The results showed that presence of the crack had significantly changed the local stress and strain distributions of the piston rod compared with non-flaw assumption.

Cognitive dissonance resolution is related to episodic memory.

PubMed

Salti, Moti; El Karoui, Imen; Maillet, Mathurin; Naccache, Lionel

2014-01-01

The notion that our past choices affect our future behavior is certainly one of the most influential concepts of social psychology since its first experimental report in the 50 s, and its initial theorization by Festinger within the "cognitive dissonance" framework. Using the free choice paradigm (FCP), it was shown that choosing between two similarly rated items made subjects reevaluate the chosen items as more attractive and the rejected items as less attractive. However, in 2010 a major work by Chen and Risen revealed a severe statistical flaw casting doubt on most previous studies. Izuma and colleagues (2010) supplemented the traditional FCP with original control conditions and concluded that the effect observed could not be solely attributed to this methodological flaw. In the present work we aimed at establishing the existence of genuine choice-induced preference change and characterizing this effect. To do so, we replicated Izuma et al.' study and added a new important control condition which was absent from the original study. Moreover, we added a memory test in order to measure the possible relation between episodic memory of choices and observed behavioral effects. In two experiments we provide experimental evidence supporting genuine choice-induced preference change obtained with FCP. We also contribute to the understanding of the phenomenon by showing that choice-induced preference change effects are strongly correlated with episodic memory.

Cognitive Dissonance Resolution Is Related to Episodic Memory

PubMed Central

Maillet, Mathurin; Naccache, Lionel

2014-01-01

The notion that our past choices affect our future behavior is certainly one of the most influential concepts of social psychology since its first experimental report in the 50 s, and its initial theorization by Festinger within the “cognitive dissonance” framework. Using the free choice paradigm (FCP), it was shown that choosing between two similarly rated items made subjects reevaluate the chosen items as more attractive and the rejected items as less attractive. However, in 2010 a major work by Chen and Risen revealed a severe statistical flaw casting doubt on most previous studies. Izuma and colleagues (2010) supplemented the traditional FCP with original control conditions and concluded that the effect observed could not be solely attributed to this methodological flaw. In the present work we aimed at establishing the existence of genuine choice-induced preference change and characterizing this effect. To do so, we replicated Izuma et al.’ study and added a new important control condition which was absent from the original study. Moreover, we added a memory test in order to measure the possible relation between episodic memory of choices and observed behavioral effects. In two experiments we provide experimental evidence supporting genuine choice-induced preference change obtained with FCP. We also contribute to the understanding of the phenomenon by showing that choice-induced preference change effects are strongly correlated with episodic memory. PMID:25264950

Reusable Software Usability Specifications for mHealth Applications.

PubMed

Cruz Zapata, Belén; Fernández-Alemán, José Luis; Toval, Ambrosio; Idri, Ali

2018-01-25

One of the key factors for the adoption of mobile technologies, and in particular of mobile health applications, is usability. A usable application will be easier to use and understand by users, and will improve user's interaction with it. This paper proposes a software requirements catalog for usable mobile health applications, which can be used for the development of new applications, or the evaluation of existing ones. The catalog is based on the main identified sources in literature on usability and mobile health applications. Our catalog was organized according to the ISO/IEC/IEEE 29148:2011 standard and follows the SIREN methodology to create reusable catalogs. The applicability of the catalog was verified by the creation of an audit method, which was used to perform the evaluation of a real app, S Health, application created by Samsung Electronics Co. The usability requirements catalog, along with the audit method, identified several usability flaws on the evaluated app, which scored 83%. Some flaws were detected in the app related to the navigation pattern. Some more issues related to the startup experience, empty screens or writing style were also found. The way a user navigates through an application improves or deteriorates user's experience with the application. We proposed a reusable usability catalog and an audit method. This proposal was used to evaluate a mobile health application. An audit report was created with the usability issues identified on the evaluated application.

Simulation of the Thermographic Response of Near Surface Flaws in Reinforced Carbon-Carbon Panels

NASA Technical Reports Server (NTRS)

Winfree, William P.; Howell, Patricia A.; Burke, Eric R.

2009-01-01

Thermographic inspection is a viable technique for detecting in-service damage in reinforced carbon-carbon (RCC) composites that are used for thermal protection in the leading edge of the shuttle orbiter. A thermographic technique for detection of near surface flaws in RCC composite structures is presented. A finite element model of the heat diffusion in structures with expected flaw configurations is in good agreement with the experimental measurements.

JPRS Report, Science & Technology, USSR: Electronics & Electrical Engineering.

DTIC Science & Technology

1988-02-05

Sirena -1 Self-propelled Flaw Detector [PRIBORYI SISTEMY UPRAVLENIYA, Jan 87] 14 Crane Strain-measurement Scales With Data Processing by a Microprocessor...was 3-5 m. 06415/06662 UDC 620.179.1:620.165.29 Algorithimization of Control of Electric Motor Drive of Sirena -1 Self-propelled Flaw Detector...The article describes one of the most optimum algorithms of control of the electric motor drive of the Sirena -1 self-propelled flaw detector

Analysis and Test of Deep Flaws in Thin Sheets of Aluminum and Titanium. Volume 2: Crack Opening Displacement and Stress-Strain Data

NASA Technical Reports Server (NTRS)

Finger, R. W.

1978-01-01

Static fracture tests were performed on surface flawed specimens of aluminum and titanium alloys. A simulated proof overload cycle was applied prior to all of the cyclic tests. Variables included in each test series were flaw shapes and thickness. Additionally, test temperature was a variable for the aluminum test series. The crack opening displacement and stress-strain data obtained are presented.

Automatic Inspection Of Heat Seals Between Plastic Sheets

NASA Technical Reports Server (NTRS)

Rai, Kula R.; Lew, Thomas M.; Sinclair, Robert B.

1995-01-01

Automatic inspection apparatus detects flaws in heat seals between films of polyethylene or other thermoplastic material. Heat-sealed strip in multilayer plastic sheet continuously moved lengthwise over illuminators. Variations in light transmitted through sheet interpreted to find flaws in heat seal. Site of flaw marked to facilitate subsequent manual inspection. Heat sealing used to join plastic films in manufacturing of variety of products, including inflatable toys and balloons carrying scientific instruments to high altitudes.

Development of an optical fiber interferometer for detection of surface flaws in aluminum

NASA Technical Reports Server (NTRS)

Gilbert, John A.

1991-01-01

The main objective was to demonstrate the potential of using an optical fiber interferometer (OFI) to detect surface flaws in aluminum samples. Standard ultrasonic excitation was used to generate Rayleigh surface waves. After the waves interacted with a defect, the modified responses were detected using the OFI and the results were analyzed for time-of-flight and frequency content to predict the size and location of the flaws.

Deep Flaw Detection with Giant Magnetoresistive (GMR) Based Self-Nulling Probe

NASA Technical Reports Server (NTRS)

Wincheski, Buzz; Namkung, Min

2004-01-01

In this paper a design modification to the Very-Low Frequency GMR Based Self-Nulling Probe has been presented to enable improved signal to noise ratio for deeply buried flaws. The design change consists of incorporating a feedback coil in the center of the flux focusing lens. The use of the feedback coil enables cancellation of the leakage fields in the center of the probe and biasing of the GMR sensor to a location of high magnetic field sensitivity. The effect of the feedback on the probe output was examined, and experimental results for deep flaw detection were presented. The experimental results show that the modified probe is capable of clearly identifying flaws up to 1 cm deep in aluminum alloy structures.

FUNCTIONAL HOP TESTS AND TUCK JUMP ASSESSMENT SCORES BETWEEN FEMALE DIVISION I COLLEGIATE ATHLETES PARTICIPATING IN HIGH VERSUS LOW ACL INJURY PRONE SPORTS: A CROSS SECTIONAL ANALYSIS

PubMed Central

Hoog, Philipp; Warren, Meghan; Smith, Craig A.

2016-01-01

Background Although functional tests including the single leg hop (SLH), triple hop (TH), cross over hop (COH) for distance, and the tuck jump assessment (TJA) are used for return to play (RTP) criteria for post anterior cruciate ligament (ACL) injury, sport-specific baseline measurements are limited. Purpose The purpose of this study was to examine differences in SLH, TH, and COH distance and limb symmetry index (LSI), as well as total scores, number of jumps, and individual flaws of the TJA in 97 injury-free Division I (DI) collegiate female student athletes participating in ACL injury prone vs. non ACL injury prone sports. The hypothesis was that significant mean differences and asymmetries (LSI) would exist between the two groups in SLH, TH, COH and TJA. Study Design Cross sectional. Methods Due to research suggesting inherent ACL injury risk associated with specific sport involvement, participants were grouped into high (HR, n=57) and low (LR, n=40) ACL injury risk based on participating in a sport with high or low ACL injury rates. The HR group was composed of athletes participating in soccer, basketball, and volleyball, while the LR group athletes participated in diving, cross country, and track and field. Participants performed all standard functional tests (SFT) and side-to-side differences for each participant as well as between group differences were assessed for the hop tests. The LSI, a ratio frequently used to gauge athletes’ readiness for RTP post injury, was also assessed for between group differences. The TJA was compared between the groups on individual flaws, overall scores, and number of jumps performed. Results No between group differences for hop distances were found, with medium to large effect sizes for SLH, TH, and COH. The HR group had a higher TJA score, number of jumps, and higher proportion of the flaw of ‘foot placement not shoulder width apart’. Conclusion Although most SFT's showed no significant differences between athlete groups, some differences were seen in the TJA; the HR group showed an increase in ‘foot placement not shoulder width apart’ flaw, higher overall flaw scores, and overall jumped more times compared to the LR group. These results may warrant caution in relying solely on SFT for RTP decisions, due to potential asymmetries seen in an uninjured population with baseline testing. Level of Evidence 4 PMID:27904796

Phased Array Ultrasonic Examination of Reactor Coolant System (Carbon Steel-to-CASS) Dissimilar Metal Weld Mockup Specimen

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crawford, S. L.; Cinson, A. D.; Diaz, A. A.

2015-11-23

In the summer of 2009, Pacific Northwest National Laboratory (PNNL) staff traveled to the Electric Power Research Institute (EPRI) NDE Center in Charlotte, North Carolina, to conduct phased-array ultrasonic testing on a large bore, reactor coolant pump nozzle-to-safe-end mockup. This mockup was fabricated by FlawTech, Inc. and the configuration originated from the Port St. Lucie nuclear power plant. These plants are Combustion Engineering-designed reactors. This mockup consists of a carbon steel elbow with stainless steel cladding joined to a cast austenitic stainless steel (CASS) safe-end with a dissimilar metal weld and is owned by Florida Power & Light. The objectivemore » of this study, and the data acquisition exercise held at the EPRI NDE Center, were focused on evaluating the capabilities of advanced, low-frequency phased-array ultrasonic testing (PA-UT) examination techniques for detection and characterization of implanted circumferential flaws and machined reflectors in a thick-section CASS dissimilar metal weld component. This work was limited to PA-UT assessments using 500 kHz and 800 kHz probes on circumferential flaws only, and evaluated detection and characterization of these flaws and machined reflectors from the CASS safe-end side only. All data were obtained using spatially encoded, manual scanning techniques. The effects of such factors as line-scan versus raster-scan examination approaches were evaluated, and PA-UT detection and characterization performance as a function of inspection frequency/wavelength, were also assessed. A comparative assessment of the data is provided, using length-sizing root-mean-square-error and position/localization results (flaw start/stop information) as the key criteria for flaw characterization performance. In addition, flaw signal-to-noise ratio was identified as the key criterion for detection performance.« less

A major advance in powder metallurgy

NASA Technical Reports Server (NTRS)

Williams, Brian E.; Stiglich, Jacob J., Jr.; Kaplan, Richard B.; Tuffias, Robert H.

1991-01-01

Ultramet has developed a process which promises to significantly increase the mechanical properties of powder metallurgy (PM) parts. Current PM technology uses mixed powders of various constituents prior to compaction. The homogeneity and flaw distribution in PM parts depends on the uniformity of mixing and the maintenance of uniformity during compaction. Conventional PM fabrication processes typically result in non-uniform distribution of the matrix, flaw generation due to particle-particle contact when one of the constituents is a brittle material, and grain growth caused by high temperature, long duration compaction processes. Additionally, a significant amount of matrix material is usually necessary to fill voids and create 100 percent dense parts. In Ultramet's process, each individual particle is coated with the matrix material, and compaction is performed by solid state processing. In this program, Ultramet coated 12-micron tungsten particles with approximately 5 wt percent nickel/iron. After compaction, flexure strengths were measured 50 percent higher than those achieved in conventional liquid phase sintered parts (10 wt percent Ni/Fe). Further results and other material combinations are discussed.

Crack Coalescence in Molded Gypsum and Carrara Marble

NASA Astrophysics Data System (ADS)

Wong, N.; Einstein, H. H.

2007-12-01

This research investigates the fracturing and coalescence behavior in prismatic laboratory-molded gypsum and Carrara marble specimens, which consist of either one or two pre-existing open flaws, under uniaxial compression. The tests are monitored by a high speed video system with a frame rate up to 24,000 frames/second. It allows one to precisely observe the cracking mechanisms, in particular if shear or tensile fracturing takes place. Seven crack types and nine crack coalescence categories are identified. The flaw inclination angle, the ligament length and the bridging angle between two flaws have different extents of influence on the coalescence patterns. For coplanar flaws, as the flaw inclination angle increases, there is a general trend of variation from shear coalescence to tensile coalescence. For stepped flaws, as the bridging angle changes from negative to small positive, and further up to large positive values, the coalescence generally progresses from categories of no coalescence, indirect coalescence to direct coalescence. For direct coalescence, it generally progresses from shear, mixed shear-tensile to tensile as the bridging angle increases. Some differences in fracturing and coalescence processes are observed in gypsum and marble, particularly the crack initiation in marble is preceded by the development of macroscopic white patches, but not in gypsum. Scanning Electron Microprobe (SEM) study reveals that the white patches consist of zones of microcracks (process zones).

Industrial inspection of specular surfaces using a new calibration procedure

NASA Astrophysics Data System (ADS)

Aswendt, Petra; Hofling, Roland; Gartner, Soren

2005-06-01

The methodology of phase encoded reflection measurements has become a valuable tool for the industrial inspection of components with glossy surfaces. The measuring principle provides outstanding sensitivity for tiny variations of surface curvature so that sub-micron waviness and flaws are reliably detected. Quantitative curvature measurements can be obtained from a simple approach if the object is almost flat. 3D-objects with a high aspect ratio require more effort to determine both coordinates and normal direction of a surface point unambiguously. Stereoscopic solutions have been reported using more than one camera for a certain surface area. This paper will describe the combined double camera steady surface approach (DCSS) that is well suited for the implementation in industrial testing stations

Mindfulness-Based Interventions for Older Adults: A Review of the Effects on Physical and Emotional Well-being

PubMed Central

Geiger, Paul J.; Boggero, Ian A.; Brake, C. Alex; Caldera, Carolina A.; Combs, Hannah L.; Peters, Jessica R.; Baer, Ruth A.

2015-01-01

This comprehensive review examined the effects of mindfulness-based interventions on the physical and emotional wellbeing of older adults, a rapidly growing segment of the general population. Search procedures yielded 15 treatment outcome studies meeting inclusion criteria. Support was found for the feasibility and acceptability of mindfulness-based interventions with older adults. Physical and emotional wellbeing outcome variables offered mixed support for the use of mindfulness-based interventions with older adults. Potential explanations of mixed findings may include methodological flaws, study limitations, and inconsistent modifications of protocols. These are discussed in detail and future avenues of research are discussed, emphasizing the need to incorporate geriatric populations into future mindfulness-based empirical research. PMID:27200109

The incidence and role of negative citations in science.

PubMed

Catalini, Christian; Lacetera, Nicola; Oettl, Alexander

2015-11-10

Citations to previous literature are extensively used to measure the quality and diffusion of knowledge. However, we know little about the different ways in which a study can be cited; in particular, are papers cited to point out their merits or their flaws? We elaborated a methodology to characterize "negative" citations using bibliometric data and natural language processing. We found that negative citations concerned higher-quality papers, were focused on a study's findings rather than theories or methods, and originated from scholars who were closer to the authors of the focal paper in terms of discipline and social distance, but not geographically. Receiving a negative citation was also associated with a slightly faster decline in citations to the paper in the long run.

A systematic review of homoeopathy for the treatment of fibromyalgia.

PubMed

Perry, Rachel; Terry, Rohini; Ernst, Edzard

2010-05-01

Homoeopathy is often advocated for fibromyalgia (FM) and many FM patients use it. To critically evaluate all randomised clinical trials (RCTs) of homoeopathy as a treatment for FM, six electronic databases were searched to identify all relevant studies. Data extraction and the assessment of the methodological quality of all included studies were done by two independent reviewers. Four RCTs were found, including two feasibility studies. Three studies were placebo-controlled. None of the trials was without serious flaws. Invariably, their results suggested that homoeopathy was better than the control interventions in alleviating the symptoms of FM. Independent replications are missing. Even though all RCTs suggested results that favour homoeopathy, important caveats exist. Therefore, the effectiveness of homoeopathy as a symptomatic treatment for FM remains unproven.

A critical view of the quest for brain structural markers of Albert Einstein's special talents (a pot of gold under the rainbow).

PubMed

Colombo, Jorge A

2018-06-01

Assertions regarding attempts to link glial and macrostructural brain events with cognitive performance regarding Albert Einstein, are critically reviewed. One basic problem arises from attempting to draw causal relationships regarding complex, delicately interactive functional processes involving finely tuned molecular and connectivity phenomena expressed in cognitive performance, based on highly variable brain structural events of a single, aged, formalin fixed brain. Data weaknesses and logical flaws are considered. In other instances, similar neuroanatomical observations received different interpretations and conclusions, as those drawn, e.g., from schizophrenic brains. Observations on white matter events also raise methodological queries. Additionally, neurocognitive considerations on other intellectual aptitudes of A. Einstein were simply ignored.

Getting educated: e-learning resources in the design and execution of surgical trials.

PubMed

Bains, Simrit

2009-01-01

An evidence-based approach to research, which includes important aspects such as critical appraisal, is essential for the effective conduct of clinical trials. Researchers who are interested in educating themselves about its principles in order to incorporate them into their trials face challenges when attempting to acquire this information from traditional learning sources. E-learning resources offer an intriguing possibility of overcoming the challenges posed by traditional learning, and show promise as a way to expand accessibility to quality education about evidence-based principles. An assessment of existing e-learning resources reveals positive educational avenues for researchers, although significant flaws exist. The Global EducatorTM by Global Research Solutions addresses many of these flaws and is an e-learning resource that combines convenience with comprehensiveness.

Reliability of steam generator tubing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kadokami, E.

1997-02-01

The author presents results on studies made of the reliability of steam generator (SG) tubing. The basis for this work is that in Japan the issue of defects in SG tubing is addressed by the approach that any detected defect should be repaired, either by plugging the tube or sleeving it. However, this leaves open the issue that there is a detection limit in practice, and what is the effect of nondetectable cracks on the performance of tubing. These studies were commissioned to look at the safety issues involved in degraded SG tubing. The program has looked at a numbermore » of different issues. First was an assessment of the penetration and opening behavior of tube flaws due to internal pressure in the tubing. They have studied: penetration behavior of the tube flaws; primary water leakage from through-wall flaws; opening behavior of through-wall flaws. In addition they have looked at the question of the reliability of tubing with flaws during normal plant operation. Also there have been studies done on the consequences of tube rupture accidents on the integrity of neighboring tubes.« less

Unit-Sphere Anisotropic Multiaxial Stochastic-Strength Model Probability Density Distribution for the Orientation of Critical Flaws

NASA Technical Reports Server (NTRS)

Nemeth, Noel

2013-01-01

Models that predict the failure probability of monolithic glass and ceramic components under multiaxial loading have been developed by authors such as Batdorf, Evans, and Matsuo. These "unit-sphere" failure models assume that the strength-controlling flaws are randomly oriented, noninteracting planar microcracks of specified geometry but of variable size. This report develops a formulation to describe the probability density distribution of the orientation of critical strength-controlling flaws that results from an applied load. This distribution is a function of the multiaxial stress state, the shear sensitivity of the flaws, the Weibull modulus, and the strength anisotropy. Examples are provided showing the predicted response on the unit sphere for various stress states for isotropic and transversely isotropic (anisotropic) materials--including the most probable orientation of critical flaws for offset uniaxial loads with strength anisotropy. The author anticipates that this information could be used to determine anisotropic stiffness degradation or anisotropic damage evolution for individual brittle (or quasi-brittle) composite material constituents within finite element or micromechanics-based software

Progress on ultrasonic flaw sizing in turbine-engine rotor components: bore and web geometries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rose, J.H.; Gray, T.A.; Thompson, R.B.

1983-01-01

The application of generic flaw-sizing techniques to specific components generally involves difficulties associated with geometrical complexity and simplifications arising from a knowledge of the expected flaw distribution. This paper is concerned with the case of ultrasonic flaw sizing in turbine-engine rotor components. The sizing of flat penny-shaped cracks in the web geometry discussed and new crack-sizing algorithms based on the Born and Kirchhoff approximations are introduced. Additionally, we propose a simple method for finding the size of a flat, penny-shaped crack given only the magnitude of the scattering amplitude. The bore geometry is discussed with primary emphasis on the cylindricalmore » focusing of the incident beam. Important questions which are addressed include the effects of diffraction and the position of the flaw with respect to the focal line. The appropriate deconvolution procedures to account for these effects are introduced. Generic features of the theory are compared with experiment. Finally, the effects of focused transducers on the Born inversion algorithm are discussed.« less

Epidemiological characteristics and methodological quality of meta-analyses on diabetes mellitus treatment: a systematic review.

PubMed

Wu, Xin Yin; Lam, Victor C K; Yu, Yue Feng; Ho, Robin S T; Feng, Ye; Wong, Charlene H L; Yip, Benjamin H K; Tsoi, Kelvin K F; Wong, Samuel Y S; Chung, Vincent C H

2016-11-01

Well-conducted meta-analyses (MAs) are considered as one of the best sources of clinical evidence for treatment decision. MA with methodological flaws may introduce bias and mislead evidence users. The aim of this study is to investigate the characteristics and methodological quality of MAs on diabetes mellitus (DM) treatments. Systematic review. Cochrane Database of Systematic Review and Database of Abstract of Reviews of Effects were searched for relevant MAs. Assessing methodological quality of systematic reviews (AMSTAR) tool was used to evaluate the methodological quality of included MAs. Logistic regression analysis was used to identify association between characteristics of MA and AMSTAR results. A total of 252 MAs including 4999 primary studies and 13,577,025 patients were included. Over half of the MAs (65.1%) only included type 2 DM patients and 160 MAs (63.5%) focused on pharmacological treatments. About 89.7% MAs performed comprehensive literature search and 89.3% provided characteristics of included studies. Included MAs generally had poor performance on the remaining AMSTAR items, especially in assessing publication bias (39.3%), providing lists of studies (19.0%) and declaring source of support comprehensively (7.5%). Only 62.7% MAs mentioned about harm of interventions. MAs with corresponding author from Asia performed less well in providing MA protocol than those from Europe. Methodological quality of MA on DM treatments was unsatisfactory. There is considerable room for improvement, especially in assessing publication bias, providing lists of studies and declaring source of support comprehensively. Also, there is an urgent need for MA authors to report treatment harm comprehensively. © 2016 European Society of Endocrinology.

A methodology for evaluating detection performance of ultrasonic array imaging algorithms for coarse-grained materials.

PubMed

Van Pamel, Anton; Brett, Colin R; Lowe, Michael J S

2014-12-01

Improving the ultrasound inspection capability for coarse-grained metals remains of longstanding interest and is expected to become increasingly important for next-generation electricity power plants. Conventional ultrasonic A-, B-, and C-scans have been found to suffer from strong background noise caused by grain scattering, which can severely limit the detection of defects. However, in recent years, array probes and full matrix capture (FMC) imaging algorithms have unlocked exciting possibilities for improvements. To improve and compare these algorithms, we must rely on robust methodologies to quantify their performance. This article proposes such a methodology to evaluate the detection performance of imaging algorithms. For illustration, the methodology is applied to some example data using three FMC imaging algorithms; total focusing method (TFM), phase-coherent imaging (PCI), and decomposition of the time-reversal operator with multiple scattering filter (DORT MSF). However, it is important to note that this is solely to illustrate the methodology; this article does not attempt the broader investigation of different cases that would be needed to compare the performance of these algorithms in general. The methodology considers the statistics of detection, presenting the detection performance as probability of detection (POD) and probability of false alarm (PFA). A test sample of coarse-grained nickel super alloy, manufactured to represent materials used for future power plant components and containing some simple artificial defects, is used to illustrate the method on the candidate algorithms. The data are captured in pulse-echo mode using 64-element array probes at center frequencies of 1 and 5 MHz. In this particular case, it turns out that all three algorithms are shown to perform very similarly when comparing their flaw detection capabilities.

Quality Assessment of Published Articles in Iranian Journals Related to Economic Evaluation in Health Care Programs Based on Drummond's Checklist: A Narrative Review.

PubMed

Rezapour, Aziz; Jafari, Abdosaleh; Mirmasoudi, Kosha; Talebianpour, Hamid

2017-09-01

Health economic evaluation research plays an important role in selecting cost-effective interventions. The purpose of this study was to assess the quality of published articles in Iranian journals related to economic evaluation in health care programs based on Drummond's checklist in terms of numbers, features, and quality. In the present review study, published articles (Persian and English) in Iranian journals related to economic evaluation in health care programs were searched using electronic databases. In addition, the methodological quality of articles' structure was analyzed by Drummond's standard checklist. Based on the inclusion criteria, the search of databases resulted in 27 articles that fully covered economic evaluation in health care programs. A review of articles in accordance with Drummond's criteria showed that the majority of studies had flaws. The most common methodological weakness in the articles was in terms of cost calculation and valuation. Considering such methodological faults in these studies, it is anticipated that these studies would not provide an appropriate feedback to policy makers to allocate health care resources correctly and select suitable cost-effective interventions. Therefore, researchers are required to comply with the standard guidelines in order to better execute and report on economic evaluation studies.

Quality Assessment of Published Articles in Iranian Journals Related to Economic Evaluation in Health Care Programs Based on Drummond’s Checklist: A Narrative Review

PubMed Central

Rezapour, Aziz; Jafari, Abdosaleh; Mirmasoudi, Kosha; Talebianpour, Hamid

2017-01-01

Health economic evaluation research plays an important role in selecting cost-effective interventions. The purpose of this study was to assess the quality of published articles in Iranian journals related to economic evaluation in health care programs based on Drummond’s checklist in terms of numbers, features, and quality. In the present review study, published articles (Persian and English) in Iranian journals related to economic evaluation in health care programs were searched using electronic databases. In addition, the methodological quality of articles’ structure was analyzed by Drummond’s standard checklist. Based on the inclusion criteria, the search of databases resulted in 27 articles that fully covered economic evaluation in health care programs. A review of articles in accordance with Drummond’s criteria showed that the majority of studies had flaws. The most common methodological weakness in the articles was in terms of cost calculation and valuation. Considering such methodological faults in these studies, it is anticipated that these studies would not provide an appropriate feedback to policy makers to allocate health care resources correctly and select suitable cost-effective interventions. Therefore, researchers are required to comply with the standard guidelines in order to better execute and report on economic evaluation studies. PMID:29234174

Fracture Analysis of Vessels. Oak Ridge FAVOR, v06.1, Computer Code: Theory and Implementation of Algorithms, Methods, and Correlations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, P. T.; Dickson, T. L.; Yin, S.

The current regulations to insure that nuclear reactor pressure vessels (RPVs) maintain their structural integrity when subjected to transients such as pressurized thermal shock (PTS) events were derived from computational models developed in the early-to-mid 1980s. Since that time, advancements and refinements in relevant technologies that impact RPV integrity assessment have led to an effort by the NRC to re-evaluate its PTS regulations. Updated computational methodologies have been developed through interactions between experts in the relevant disciplines of thermal hydraulics, probabilistic risk assessment, materials embrittlement, fracture mechanics, and inspection (flaw characterization). Contributors to the development of these methodologies include themore » NRC staff, their contractors, and representatives from the nuclear industry. These updated methodologies have been integrated into the Fracture Analysis of Vessels -- Oak Ridge (FAVOR, v06.1) computer code developed for the NRC by the Heavy Section Steel Technology (HSST) program at Oak Ridge National Laboratory (ORNL). The FAVOR, v04.1, code represents the baseline NRC-selected applications tool for re-assessing the current PTS regulations. This report is intended to document the technical bases for the assumptions, algorithms, methods, and correlations employed in the development of the FAVOR, v06.1, code.« less

Fundamentally Flawed: Extension Administrative Practice (Part 1).

ERIC Educational Resources Information Center

Patterson, Thomas F., Jr.

1997-01-01

Extension's current administrative techniques are based on the assumptions of classical management from the early 20th century. They are fundamentally flawed and inappropriate for the contemporary workplace. (SK)

Fracture toughness improvements of dental ceramic through use of yttria-stabilized zirconia (YSZ) thin-film coatings.

PubMed

Chan, Ryan N; Stoner, Brian R; Thompson, Jeffrey Y; Scattergood, Ronald O; Piascik, Jeffrey R

2013-08-01

The aim of this study was to evaluate strengthening mechanisms of yttria-stabilized zirconia (YSZ) thin film coatings as a viable method for improving fracture toughness of all-ceramic dental restorations. Bars (2mm×2mm×15mm, n=12) were cut from porcelain (ProCAD, Ivoclar-Vivadent) blocks and wet-polished through 1200-grit using SiC abrasive. A Vickers indenter was used to induce flaws with controlled size and geometry. Depositions were performed via radio frequency magnetron sputtering (5mT, 25°C, 30:1 Ar/O2 gas ratio) with varying powers of substrate bias. Film and flaw properties were characterized by optical microscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD). Flexural strength was determined by three-point bending. Fracture toughness values were calculated from flaw size and fracture strength. Data show improvements in fracture strength of up to 57% over unmodified specimens. XRD analysis shows that films deposited with higher substrate bias displayed a high %monoclinic volume fraction (19%) compared to non-biased deposited films (87%), and resulted in increased film stresses and modified YSZ microstructures. SEM analysis shows critical flaw sizes of 67±1μm leading to fracture toughness improvements of 55% over unmodified specimens. Data support surface modification of dental ceramics with YSZ thin film coatings to improve fracture toughness. Increase in construct strength was attributed to increase in compressive film stresses and modified YSZ thin film microstructures. It is believed that this surface modification may lead to significant improvements and overall reliability of all-ceramic dental restorations. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Characteristics and analysis of scientific articles submitted to the European Annals of Otorhinolaryngology, Head and Neck Diseases.

PubMed

Laccourreye, O; Bonfils, P; Denoyelle, F; Garrel, R; Jankowski, R; Karkas, A; Makeieff, M; Righini, C; Vincent, C; Martin, C

2015-09-01

To evaluate characteristics, suggested modifications and reasons for rejection in scientific articles submitted for publication in the European Annals of Otorhinolaryngology, Head and Neck Diseases. A prospective study analyzed the flaws noted by reviewers in 52 scientific articles submitted to the European Annals of Otorhinolaryngology, Head and Neck Diseases between August 31, 2014 and February 28, 2015. Fifteen flaws concerning content and 7 concerning form were identified. In more than 25% of submissions, major flaws were noted: purely descriptive paper; lack of contribution to existing state of knowledge; failure to define a clear study objective and/or analyze the impact of major variables; poorly structured Materials and methods section, lacking description of study population, objective and/or variables; lack of or inappropriate statistical analysis; Introduction verbose and/or misrepresenting the literature; excessively heterogeneous and/or poorly described study population; imprecise discussion, straying from the point, overstating the significance of results and/or introducing new results not mentioned in the Results section; description of the study population placed in the Results section instead of under Materials and methods; serious mistakes of syntax, spelling and/or tense; and failure to follow the Instructions to Authors. After review, 21.1% of articles were published, 65.3% rejected and 13.4% non-resubmitted within 3 months of review. On univariate analysis, the only variable increasing the percentage of articles accepted was the topic not being devoted to head and neck surgery (P=0.03). These results document the excessive flaw rate still to be found in manuscripts and demonstrate the continuing need for authors to master and implement the rules of scientific medical writing. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Quality of reporting of systematic reviews published in “evidence-based” Chinese journals

PubMed Central

2014-01-01

Background The number of systematic reviews (SRs)/meta-analyses (MAs) has increased dramatically in China over the past decades. However, evaluation of quality of reporting of systematic reviews published has not been undertaken. The objective of this study is to evaluate the quality of reporting of SRs/MAs assessing efficacy and/or harms of clinical interventions published in “evidence-based” Chinese journals. Methods Web-based database searches were conducted for the Chinese Journal of Evidence-based Medicine, the Journal of Evidence-Based Medicine, the Chinese Journal of Evidence Based Pediatrics, and the Chinese Journal of Evidence-Based Cardiovascular Medicine. SRs/MAs assessing efficacy and/or harms of clinical interventions were included. The cut-off was December 31st 2011. The PRISMA statement was applied to assess the quality of reporting. Each item was assessed as follows: ‘Yes’ for total compliance, scored ‘1’; ‘partial’ for partial compliance, scored ‘0.5’; and ‘No’ for non-compliance, scored ‘0’. The review was considered to have major flaws if it received a total score of ≤15.0, minor flaws if it received a total score of 15.5 to 21.0, and minimal flaws if it received a total score 21.5 to 27.0. Odds ratios were used for binary variables, and the mean difference was used for continuous variables. Analyses were performed using RevMan 5.0 software. Results Overall, 487 SRs/MAs were identified and assessed. The included reviews had medium quality with minor flaws based on PRISMA total scores (range: 8.5–26.0; mean: 19.6 ± 3.3). The stratified analysis showed that SRs/MAs with more than 3 authors, from a university, hospital + university cooperation, multiple affiliations (≥2), and funding have significantly higher quality of reporting of SRs/MAs; 58% of the included reviews were considered to have minor flaws (total score of 15.6 to 21.0). Only 9.6% of reviews were considered to have major flaws. Specific areas needing improvement in reporting include the abstract, protocol and registration, and characteristics of the search. Conclusions The reporting of SRs published in “evidence-based” Chinese journals is poor and needs to be improved in order for reviews to be useful. SR authors should use the PRISMA checklist to ensure complete and accurate accounts of their SRs. PMID:24906805

Virtual containment system for composite flywheels

NASA Astrophysics Data System (ADS)

Shiue, Fuh-Wen

2001-07-01

There is much interest in advanced composite flywheel systems for use on satellites mainly because of the potential for considerable weight savings associated with combined energy and momentum management. The additional weight of a containment system needed to protect the satellite in the event of a flywheel failure, however, could negate the potential savings. Therefore, the development of a condition monitoring and virtual containment system is essential to ensure the wide acceptance of flywheel batteries for spacecraft applications. A virtual containment system is a near real-time condition monitoring system, plus additional logic to adjust the operating conditions (maximum rotational speed) accordingly when a flaw or fault is detected. Flaws of primary interest in this study are those unique to composite flywheels, such as delamination and debonding of interfaces. Such flaws change the balance state of a flywheel through small, but detectable, motion of the mass center and principal axes of inertia. A proposed monitoring technique determines the existence and the extent of such flaws by a method similar to the influence-coefficient rotor balancing method. Because of the speed-dependence of the imbalance caused by elastic flaws, a normalized imbalance change, which is a direct measure of the flaw size, was defined. To account for the possibility that flaw growth could actually improve the balance state of a rotor, a new concept of accumulated imbalance change was also introduced. Laboratory tests showed the proposed method was able to detect small simulated flaws that result in as little as 2--3 microns of mass center movement. Fracture mechanics concepts were used to evaluate the severity and growth rate of the detected flaw. An interesting discovery that coincided with some experimental observations reported in the literature was the energy release rate reduction with a large crack. This finding indicates a possible stress relief and crack arrest when a circumferential crack grows over certain size. This phenomenon is largely due to crack curvature unique to filament-wound composite flywheels. Several virtual containment strategies were investigated numerically to demonstrate the feasibility of virtual containment systems. Once a flaw is detected during flywheel operation, the maximum operating speed can be reduced to prevent catastrophic failure, achieve a specific design life, and maximize energy storage capacity over the remaining life. A numerical example showed 4--5 times of improvement in cumulative energy storage through lifetime with a virtual containment. A closed-loop speed controller using condition monitoring sensor feedback was investigated numerically to account for possible imperfection of the fracture mechanics model. Finally, an integrated virtual containment system without any complex fracture mechanics analysis was also developed and successfully demonstrated experimentally.

Least Squares Best Fit Method for the Three Parameter Weibull Distribution: Analysis of Tensile and Bend Specimens with Volume or Surface Flaw Failure

NASA Technical Reports Server (NTRS)

Gross, Bernard

1996-01-01

Material characterization parameters obtained from naturally flawed specimens are necessary for reliability evaluation of non-deterministic advanced ceramic structural components. The least squares best fit method is applied to the three parameter uniaxial Weibull model to obtain the material parameters from experimental tests on volume or surface flawed specimens subjected to pure tension, pure bending, four point or three point loading. Several illustrative example problems are provided.

Strengths of balloon films with flaws and repairs

NASA Technical Reports Server (NTRS)

Portanova, M. A.

1989-01-01

The effects of manufacture flaws and repairs in high altitude scientific balloons was examined. A right circular cylinder was used to induce a biaxial tension-tension stress field in the polyethlene film used to manufacture these balloons. A preliminary investigation of the effect that cylinder geometry has on stress rate as a function of inflation rate was conducted. The ultimate goal was to rank, by order of degrading effects, the flaws and repairs commonly found in current high altitude balloons.

Methodological issues and research recommendations for mild traumatic brain injury: the WHO Collaborating Centre Task Force on Mild Traumatic Brain Injury.

PubMed

Carroll, Linda J; Cassidy, J David; Holm, Lena; Kraus, Jess; Coronado, Victor G

2004-02-01

The WHO Collaborating Centre for Neurotrauma Task Force on Mild Traumatic Brain Injury performed a comprehensive search and critical review of the literature published between 1980 and 2002 to assemble the best evidence on the epidemiology, diagnosis, prognosis and treatment of mild traumatic brain injury. Of 743 relevant studies, 313 were accepted on scientific merit and comprise our best-evidence synthesis. The current literature on mild traumatic brain injury is of variable quality and we report the most common methodological flaws. We make recommendations for avoiding the shortcomings evident in much of the current literature and identify topic areas in urgent need of further research. This includes the need for large, well-designed studies to support evidence-based guidelines for emergency room triage of children with mild traumatic brain injury and to explore more fully the issue of prognosis after mild traumatic brain injury in the elderly population. We also advocate use of standard criteria for defining mild traumatic brain injury and propose a definition.

Insensitivity to Flaws Leads to Damage Tolerance in Brittle Architected Meta-Materials

NASA Astrophysics Data System (ADS)

Montemayor, L. C.; Wong, W. H.; Zhang, Y.-W.; Greer, J. R.

2016-02-01

Cellular solids are instrumental in creating lightweight, strong, and damage-tolerant engineering materials. By extending feature size down to the nanoscale, we simultaneously exploit the architecture and material size effects to substantially enhance structural integrity of architected meta-materials. We discovered that hollow-tube alumina nanolattices with 3D kagome geometry that contained pre-fabricated flaws always failed at the same load as the pristine specimens when the ratio of notch length (a) to sample width (w) is no greater than 1/3, with no correlation between failure occurring at or away from the notch. Samples with (a/w) > 0.3, and notch length-to-unit cell size ratios of (a/l) > 5.2, failed at a lower peak loads because of the higher sample compliance when fewer unit cells span the intact region. Finite element simulations show that the failure is governed by purely tensile loading for (a/w) < 0.3 for the same (a/l); bending begins to play a significant role in failure as (a/w) increases. This experimental and computational work demonstrates that the discrete-continuum duality of architected structural meta-materials may give rise to their damage tolerance and insensitivity of failure to the presence of flaws even when made entirely of intrinsically brittle materials.

Effect of Combined Loading Due to Bending and Internal Pressure on Pipe Flaw Evaluation Criteria

NASA Astrophysics Data System (ADS)

Miura, Naoki; Sakai, Shinsuke

Considering a rule for the rationalization of maintenance of Light Water Reactor piping, reliable flaw evaluation criteria are essential for determining how a detected flaw will be detrimental to continuous plant operation. Ductile fracture is one of the dominant failure modes that must be considered for carbon steel piping and can be analyzed by elastic-plastic fracture mechanics. Some analytical efforts have provided various flaw evaluation criteria using load correction factors, such as the Z-factors in the JSME codes on fitness-for-service for nuclear power plants and the section XI of the ASME boiler and pressure vessel code. The present Z-factors were conventionally determined, taking conservativity and simplicity into account; however, the effect of internal pressure, which is an important factor under actual plant conditions, was not adequately considered. Recently, a J-estimation scheme, LBB.ENGC for the ductile fracture analysis of circumferentially through-wall-cracked pipes subjected to combined loading was developed for more accurate prediction under more realistic conditions. This method explicitly incorporates the contributions of both bending and tension due to internal pressure by means of a scheme that is compatible with an arbitrary combined-loading history. In this study, the effect of internal pressure on the flaw evaluation criteria was investigated using the new J-estimation scheme. The Z-factor obtained in this study was compared with the presently used Z-factors, and the predictability of the current flaw evaluation criteria was quantitatively evaluated in consideration of the internal pressure.

STRengthening Analytical Thinking for Observational Studies: the STRATOS initiative

PubMed Central

Sauerbrei, Willi; Abrahamowicz, Michal; Altman, Douglas G; le Cessie, Saskia; Carpenter, James

2014-01-01

The validity and practical utility of observational medical research depends critically on good study design, excellent data quality, appropriate statistical methods and accurate interpretation of results. Statistical methodology has seen substantial development in recent times. Unfortunately, many of these methodological developments are ignored in practice. Consequently, design and analysis of observational studies often exhibit serious weaknesses. The lack of guidance on vital practical issues discourages many applied researchers from using more sophisticated and possibly more appropriate methods when analyzing observational studies. Furthermore, many analyses are conducted by researchers with a relatively weak statistical background and limited experience in using statistical methodology and software. Consequently, even ‘standard’ analyses reported in the medical literature are often flawed, casting doubt on their results and conclusions. An efficient way to help researchers to keep up with recent methodological developments is to develop guidance documents that are spread to the research community at large. These observations led to the initiation of the strengthening analytical thinking for observational studies (STRATOS) initiative, a large collaboration of experts in many different areas of biostatistical research. The objective of STRATOS is to provide accessible and accurate guidance in the design and analysis of observational studies. The guidance is intended for applied statisticians and other data analysts with varying levels of statistical education, experience and interests. In this article, we introduce the STRATOS initiative and its main aims, present the need for guidance documents and outline the planned approach and progress so far. We encourage other biostatisticians to become involved. PMID:25074480

Rating the methodological quality in systematic reviews of studies on measurement properties: a scoring system for the COSMIN checklist.

PubMed

Terwee, Caroline B; Mokkink, Lidwine B; Knol, Dirk L; Ostelo, Raymond W J G; Bouter, Lex M; de Vet, Henrica C W

2012-05-01

The COSMIN checklist is a standardized tool for assessing the methodological quality of studies on measurement properties. It contains 9 boxes, each dealing with one measurement property, with 5-18 items per box about design aspects and statistical methods. Our aim was to develop a scoring system for the COSMIN checklist to calculate quality scores per measurement property when using the checklist in systematic reviews of measurement properties. The scoring system was developed based on discussions among experts and testing of the scoring system on 46 articles from a systematic review. Four response options were defined for each COSMIN item (excellent, good, fair, and poor). A quality score per measurement property is obtained by taking the lowest rating of any item in a box ("worst score counts"). Specific criteria for excellent, good, fair, and poor quality for each COSMIN item are described. In defining the criteria, the "worst score counts" algorithm was taken into consideration. This means that only fatal flaws were defined as poor quality. The scores of the 46 articles show how the scoring system can be used to provide an overview of the methodological quality of studies included in a systematic review of measurement properties. Based on experience in testing this scoring system on 46 articles, the COSMIN checklist with the proposed scoring system seems to be a useful tool for assessing the methodological quality of studies included in systematic reviews of measurement properties.

Can projective drawings detect if a child experienced sexual or physical abuse? A systematic review of the controlled research.

PubMed

Allen, Brian; Tussey, Chriscelyn

2012-04-01

Clinical observations have suggested that children who experience physical or sexual abuse may provide indicators in their drawings that can distinguish them from nonabused children. Some have even suggested that a child's drawings and the interpretive testimony of a trained mental health clinician should be admissible in court as evidence of a child's abuse status. Many of these comments, however, may reflect a limited consideration of the available research. The current article provides a comprehensive literature review of the controlled research to determine whether any graphic indicators (e.g., genitalia, omission of body parts) or predefined scoring system can reliability and validly discriminate abused from nonabused children. Results indicate that, although individual studies have found support for various indicators or scoring systems, these results are rarely replicated, many times studies finding significant results suffer from serious methodological flaws and alternative explanations for findings (e.g., mental illness) are often present. No graphic indicator or scoring system possessed sufficient empirical evidence to support its use for identifying sexual or physical abuse. A discussion of the legal ramifications of these results is provided.

The influence of strain rate and hydrogen on the plane-strain ductility of Zircaloy cladding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Link, T.M.; Motta, A.T.; Koss, D.A.

1998-03-01

The authors studied the ductility of unirradiated Zircaloy-4 cladding under loading conditions prototypical of those found in reactivity-initiated accidents (RIA), i.e.: near plane-strain deformation in the hoop direction (transverse to the cladding axis) at room temperature and 300 C and high strain rates. To conduct these studies, they developed a specimen configuration in which near plane-strain deformation is achieved in the gage section, and a testing methodology that allows one to determine both the limit strain at the onset of localized necking and the fracture strain. The experiments indicate that there is little effect of strain rate (10{sup {minus}3} tomore » 10{sup 2} s{sup {minus}1}) on the ductility of unhydrided Zircaloy tubing deformed under near plane-strain conditions at either room temperature or 300 C. Preliminary experiments on cladding containing 190 ppm hydrogen show only a small loss of fracture strain but no clear effect on limit strain. The experiments also indicate that there is a significant loss of Zircaloy ductility when surface flaws are present in the form of thickness imperfections.« less

Fracture and Fatigue Strength Evaluation of Multiple Site Damaged Aircraft Fuselages - Curved Panel Testing and Analysis.

DOT National Transportation Integrated Search

1994-01-01

As the fleet of commercial passenger aircraft is utilized beyond their design lives, flaws have developed at the rivet holes of fuselage lap joints on some aircraft, which can grow and link up into cracks of significant length. Understanding, predict...

Defects Detection and Characterization Using Leaky Lamb Wave (LLW) Dispersion Data

NASA Technical Reports Server (NTRS)

Bar-Cohen, Y.; Mal, A.; Chang, Z.

1998-01-01

Composite materials are being used at a significant level of usage for flaw critical structures and they are taking a growing percentage of the makeup of aircraft and spacecraft. Composite structues are now reaching service duration, for which the issue of aging is requiring adquate attention.

Stress intensity factors for deep cracks emanating from the corner formed by a hole intersecting a plate surface

NASA Technical Reports Server (NTRS)

Mcgowan, J. J.; Smith, C. W.

1974-01-01

A technique consisting of a marriage between stress freezing photoelasticity and a numerical method was used to obtain stress intensity factors for natural cracks emanating from the corner at which a hole intersects a plate surface. Geometrics studied were: crack depth to thickness ratios of approximately 0.2, 0.5, and 0.75; crack depth to crack length ratios of approximately 1.0 to 2.0. All final crack geometries were grown under monotonic loading and growth was not self similar with most of the growth occurring through the thickness under remote extension. Stress intensity plate surface K sub s factors were determined at the intersection of the flaw border with the plate surface K sub s and with the edge of the hole K sub h. Results showed that for the relatively shallow flaws K sub h approximately equal to 1.5 K sub s, for the moderately deep flaws K sub h approximately equal to K sub s, and for the deep flaws K sub h approximately equal to 0.5 K sub s, revealing a severe sensitivity of K to flaw geometry.

Crack propagation from a filled flaw in rocks considering the infill influences

NASA Astrophysics Data System (ADS)

Chang, Xu; Deng, Yan; Li, Zhenhua; Wang, Shuren; Tang, C. A.

2018-05-01

This study presents a numerical and experimental study of the cracking behaviour of rock specimen containing a single filled flaw under compression. The primary aim is to investigate the influences of infill on crack patterns, load-displacement response and specimen strength. The numerical code RFPA2D (Rock Failure Process Analysis) featured by the capability of modeling heterogeneous materials is employed to develop the numerical model, which is further calibrated by physical tests. The results indicate that there exists a critical infill strength which controls crack patterns for a given flaw inclination angle. For case of infill strength lower than the critical value, the secondary or anti-cracks are disappeared by increasing the infill strength. If the infill strength is greater than the critical value, the filled flaw has little influence on the cracking path and the specimen fails by an inclined crack, as if there is no flaw. The load-displacement responses show specimen stiffness increases by increasing infill strength until the infill strength reaches its critical value. The specimen strength increases by increasing the infill strength and almost keeps constant as the infill strength exceeds its critical value.

The detection of tightly closed flaws by nondestructive testing (NDT) methods. [fatigue crack formation in aluminum alloy test specimens

NASA Technical Reports Server (NTRS)

Rummel, W. D.; Rathke, R. A.; Todd, P. H., Jr.; Mullen, S. J.

1975-01-01

Liquid penetrant, ultrasonic, eddy current and X-radiographic techniques were optimized and applied to the evaluation of 2219-T87 aluminum alloy test specimens in integrally stiffened panel, and weld panel configurations. Fatigue cracks in integrally stiffened panels, lack-of-fusion in weld panels, and fatigue cracks in weld panels were the flaw types used for evaluation. A 2319 aluminum alloy weld filler rod was used for all welding to produce the test specimens. Forty seven integrally stiffened panels containing a total of 146 fatigue cracks, ninety three lack-of-penetration (LOP) specimens containing a total of 239 LOP flaws, and one-hundred seventeen welded specimens containing a total of 293 fatigue cracks were evaluated. Nondestructive test detection reliability enhancement was evaluated during separate inspection sequences in the specimens in the 'as-machined or as-welded', post etched and post proof loaded conditions. Results of the nondestructive test evaluations were compared to the actual flaw size obtained by measurement of the fracture specimens after completing all inspection sequences. Inspection data were then analyzed to provide a statistical basis for determining the flaw detection reliability.

Fracture analysis of radial scientific instrument module registration fittings of the space telescope

NASA Technical Reports Server (NTRS)

Springfield, C. W., Jr.

1986-01-01

Various pieces of the registration fittings for the Radial Scientific instrument (SI) module of the Space Telescope were examined from a fracture mechanics point of view and deemed to be fail-safe or else have had maximum allowable flaw sizes specified for them. The results of these analyses are summarized in tabular form. In many instances the applied stress levels were so low that the threshold stress intensity factor range was never reached. In most of the others the allowable flaw sizes were large enough to be detected by visual inspection. However, for some parts, such as the flexures connecting the aluminum cover to the ball retainer in the fitting at point A, the flaw sizes were rather small. Eddy current tests are capable of detecting flaws of this size (0.022 inches x 0.1 inches), so for those which have been so tested these small flaws should represent no danger of going undetected. In every instance approximations were made to err on the conservative side. These were pointed out in the discussions of the analyses for each fitting. One conservative approximation that was not mentioned, however, is the fact that retardation was not included in the crack propagation computations.

Multilayer material characterization using thermographic signal reconstruction

NASA Astrophysics Data System (ADS)

Shepard, Steven M.; Beemer, Maria Frendberg

2016-02-01

Active-thermography has become a well-established Nondestructive Testing (NDT) method for detection of subsurface flaws. In its simplest form, flaw detection is based on visual identification of contrast between a flaw and local intact regions in an IR image sequence of the surface temperature as the sample responds to thermal stimulation. However, additional information and insight can be obtained from the sequence, even in the absence of a flaw, through analysis of the logarithmic derivatives of individual pixel time histories using the Thermographic Signal Reconstruction (TSR) method. For example, the response of a flaw-free multilayer sample to thermal stimulation can be viewed as a simple transition between the responses of infinitely thick samples of the individual constituent layers over the lifetime of the thermal diffusion process. The transition is represented compactly and uniquely by the logarithmic derivatives, based on the ratio of thermal effusivities of the layers. A spectrum of derivative responses relative to thermal effusivity ratios allows prediction of the time scale and detectability of the interface, and measurement of the thermophysical properties of one layer if the properties of the other are known. A similar transition between steady diffusion states occurs for flat bottom holes, based on the hole aspect ratio.

The impact of improving teamwork on patient outcomes in surgery: A systematic review.

PubMed

Sun, Rosa; Marshall, Dominic C; Sykes, Mark C; Maruthappu, Mahiben; Shalhoub, Joseph

2018-05-01

The aviation industry pioneered formalised crew training in order to improve safety and reduce consequences of non-technical error. This formalised training has been successfully adapted and used to in the field of surgery to improve post-operative patient outcomes. The need to implement teamwork training as an integral part of a surgical programme is increasingly being recognised. We aim to systematically review the impact of surgical teamwork training on post-operative outcomes. Two independent researchers systematically searched MEDLINE and Embase in accordance with PRISMA guidelines. Studies were screened and subjected to inclusion/exclusion criteria. Study characteristics and outcomes were reported and analysed. Our initial search identified 2720 articles. Following duplicate removal, title and abstract screening, 107 full text articles were analysed. Eight articles met our inclusion criteria. Overall, three articles supported a positive effect of good teamwork on post-operative patient outcomes. We identified key areas in study methodology that can be improved upon, including small cohort size, lack of unified training programme, and short training duration, should future studies be designed and implemented in this field. At present, there is insufficient evidence to support the hypothesis that teamwork training interventions improve patient outcomes. We believe that non-significant and conflicting results can be attributed to flaws in methodology and non-uniform training methods. With increasing amounts of evidence in this field, we predict a positive association between teamwork training and patient outcomes will come to light. Copyright © 2018 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Automatically Inspecting Thin Ceramics For Pinholes

NASA Technical Reports Server (NTRS)

Honaker, James R.

1988-01-01

Proposed apparatus for inspecting prefired ceramic materials detects minute flaws that might escape ordinary visual inspections. Method detects flaws and marks locations. Intended for such thin ceramic parts as insulation in capacitors and some radio-frequency filters.

Flaw imaging and ultrasonic techniques for characterizing sintered silicon carbide

NASA Technical Reports Server (NTRS)

Baaklini, George Y.; Abel, Phillip B.

1987-01-01

The capabilities were investigated of projection microfocus x-radiography, ultrasonic velocity and attenuation, and reflection scanning acoustic microscopy for characterizing silicon carbide specimens. Silicon carbide batches covered a range of densities and different microstructural characteristics. Room temperature, four point flexural strength tests were conducted. Fractography was used to identify types, sizes, and locations of fracture origins. Fracture toughness values were calculated from fracture strength and flaw characterization data. Detection capabilities of radiography and acoustic microscopy for fracture-causing flaws were evaluated. Applicability of ultrasonics for verifying material strength and toughness was examined.

Enhanced Eddy-Current Detection Of Weld Flaws

NASA Technical Reports Server (NTRS)

Van Wyk, Lisa M.; Willenberg, James D.

1992-01-01

Mixing of impedances measured at different frequencies reduces noise and helps reveal flaws. In new method, one excites eddy-current probe simultaneously at two different frequencies; usually, one of which integral multiple of other. Resistive and reactive components of impedance of eddy-current probe measured at two frequencies, mixed in computer, and displayed in real time on video terminal of computer. Mixing of measurements obtained at two different frequencies often "cleans up" displayed signal in situations in which band-pass filtering alone cannot: mixing removes most noise, and displayed signal resolves flaws well.

VHL Alliance

MedlinePlus

... by a flaw in one gene, the VHL gene, which regulates cell growth causing patients to battle a series of tumors ... by a flaw in one gene, the VHL gene, which regulates cell growth causing patients to battle a series of tumors ...

Fixing Flawed Body Parts: Engineering New Tissues and Organs

MedlinePlus

... 2015 Print this issue Fixing Flawed Body Parts Engineering New Tissues and Organs En español Send us ... ones. This type of research is called tissue engineering. Exciting advances continue to emerge in this fast- ...

The effectiveness of massage therapy for the treatment of nonspecific low back pain: a systematic review of systematic reviews.

PubMed

Kumar, Saravana; Beaton, Kate; Hughes, Tricia

2013-09-04

The last decade has seen a growth in the utilization of complementary and alternative medicine therapies, and one of the most popular and sought-after complementary and alternative medicine therapies for nonspecific low back pain is massage. Massage may often be perceived as a safe therapeutic modality without any significant risks or side effects. However, despite its popularity, there continues to be ongoing debate on the effectiveness of massage in treating nonspecific low back pain. With a rapidly evolving research evidence base and access to innovative means of synthesizing evidence, it is time to reinvestigate this issue. A systematic, step-by-step approach, underpinned by best practice in reviewing the literature, was utilized as part of the methodology of this umbrella review. A systematic search was conducted in the following databases: Embase, MEDLINE, AMED, ICONDA, Academic Search Premier, Australia/New Zealand Reference Centre, CINAHL, HealthSource, SPORTDiscus, PubMed, The Cochrane Library, Scopus, Web of Knowledge/Web of Science, PsycINFO, and ProQuest Nursing and Allied Health Source, investigating systematic reviews and meta-analyses from January 2000 to December 2012, and restricted to English-language documents. Methodological quality of included reviews was undertaken using the Centre for Evidence Based Medicine critical appraisal tool. Nine systematic reviews were found. The methodological quality of the systematic reviews varied (from poor to excellent) although, overall, the primary research informing these systematic reviews was generally considered to be weak quality. The findings indicate that massage may be an effective treatment option when compared to placebo and some active treatment options (such as relaxation), especially in the short term. There is conflicting and contradictory findings for the effectiveness of massage therapy for the treatment of nonspecific low back pain when compared against other manual therapies (such as mobilization), standard medical care, and acupuncture. There is an emerging body of evidence, albeit small, that supports the effectiveness of massage therapy for the treatment of non-specific low back pain in the short term. Due to common methodological flaws in the primary research, which informed the systematic reviews, recommendations arising from this evidence base should be interpreted with caution.

Fracture control method for composite tanks with load sharing liners

NASA Technical Reports Server (NTRS)

Bixler, W. D.

1975-01-01

The experimental program was based on the premise that the plastic sizing cycle, which each pressure vessel is subjected to prior to operation, acts as an effective proof test of the liner, screening out all flaws or cracks larger than a critical size. In doing so, flaw growth potential is available for cyclic operation at pressures less than the sizing pressure. Static fracture and cyclic life tests, involving laboratory type specimens and filament overwrapped tanks, were conducted on three liner materials: (1) 2219-T62 aluminum, (2) Inconel X750 STA, and (3) cryoformed 301 stainless steel. Variables included material condition, thickness, flaw size, flaw shape, temperature, sizing stress level, operating stress level and minimum-to-maximum operating stress ratio. From the empirical data base obtained, a procedure was established by which the service life of composite tanks with load sharing liners could be guaranteed with a high degree of confidence.

Flaw characterization through nonlinear ultrasonics and wavelet cross-correlation algorithms

NASA Astrophysics Data System (ADS)

Bunget, Gheorghe; Yee, Andrew; Stewart, Dylan; Rogers, James; Henley, Stanley; Bugg, Chris; Cline, John; Webster, Matthew; Farinholt, Kevin; Friedersdorf, Fritz

2018-04-01

Ultrasonic measurements have become increasingly important non-destructive techniques to characterize flaws found within various in-service industrial components. The prediction of remaining useful life based on fracture analysis depends on the accurate estimation of flaw size and orientation. However, amplitude-based ultrasonic measurements are not able to estimate the plastic zones that exist ahead of crack tips. Estimating the size of the plastic zone is an advantage since some flaws may propagate faster than others. This paper presents a wavelet cross-correlation (WCC) algorithm that was applied to nonlinear analysis of ultrasonically guided waves (GW). By using this algorithm, harmonics present in the waveforms were extracted and nonlinearity parameters were used to indicate both the tip of the cracks and size of the plastic zone. B-scans performed with the quadratic nonlinearities were sensitive to micro-damage specific to plastic zones.

Signal processing for non-destructive testing of railway tracks

NASA Astrophysics Data System (ADS)

Heckel, Thomas; Casperson, Ralf; Rühe, Sven; Mook, Gerhard

2018-04-01

Increased speed, heavier loads, altered material and modern drive systems result in an increasing number of rail flaws. The appearance of these flaws also changes continually due to the rapid change in damage mechanisms of modern rolling stock. Hence, interpretation has become difficult when evaluating non-destructive rail testing results. Due to the changed interplay between detection methods and flaws, the recorded signals may result in unclassified types of rail flaws. Methods for automatic rail inspection (according to defect detection and classification) undergo continual development. Signal processing is a key technology to master the challenge of classification and maintain resolution and detection quality, independent of operation speed. The basic ideas of signal processing, based on the Glassy-Rail-Diagram for classification purposes, are presented herein. Examples for the detection of damages caused by rolling contact fatigue also are given, and synergetic effects of combined evaluation of diverse inspection methods are shown.

Evaluation of ultrasonics and optimized radiography for 2219-T87 aluminum weldments

NASA Technical Reports Server (NTRS)

Clotfelter, W. N.; Hoop, J. M.; Duren, P. C.

1975-01-01

Ultrasonic studies are described which are specifically directed toward the quantitative measurement of randomly located defects previously found in aluminum welds with radiography or with dye penetrants. Experimental radiographic studies were also made to optimize techniques for welds of the thickness range to be used in fabricating the External Tank of the Space Shuttle. Conventional and innovative ultrasonic techniques were applied to the flaw size measurement problem. Advantages and disadvantages of each method are discussed. Flaw size data obtained ultrasonically were compared to radiographic data and to real flaw sizes determined by destructive measurements. Considerable success was achieved with pulse echo techniques and with 'pitch and catch' techniques. The radiographic work described demonstrates that careful selection of film exposure parameters for a particular application must be made to obtain optimized flaw detectability. Thus, film exposure techniques can be improved even though radiography is an old weld inspection method.

Fracture mechanics data for 2024-T861 and 2124-T851 aluminum

NASA Technical Reports Server (NTRS)

Pionke, L. J.; Linback, R. K.

1974-01-01

The fracture toughness and fatigue flaw growth characteristics of 2024-T861 and 2124-T851 aluminum were evaluated under plane stress conditions. Center cracked tension specimens were employed to evaluate these properties under a number of different test conditions which included variations in specimen thickness, specimen orientation, test environment, and initial flaw size. The effect of buckling was also investigated for all tests of thin gage specimens, and the effect of frequency and stress ratio was evaluated for the cyclic tests. Fracture toughness test results were analyzed and presented in terms of fracture resistance curves; fatigue flaw growth data was analyzed using empirical rate models. The results of the study indicate that both fracture toughness and resistance to fatigue crack growth improve with increasing temperature and decreasing thickness. The presence of buckling during testing of thin gage panels was found to degrade the resistance to fatigue flaw growth only at elevated temperatures.

Nondestructive ultrasonic characterization of armor grade silicon carbide

NASA Astrophysics Data System (ADS)

Portune, Andrew Richard

Ceramic materials have traditionally been chosen for armor applications for their superior mechanical properties and low densities. At high strain rates seen during ballistic events, the behavior of these materials relies upon the total volumetric flaw concentration more so than any single anomalous flaw. In this context flaws can be defined as any microstructural feature which detriments the performance of the material, potentially including secondary phases, pores, or unreacted sintering additives. Predicting the performance of armor grade ceramic materials depends on knowledge of the absolute and relative concentration and size distribution of bulk heterogeneities. Ultrasound was chosen as a nondestructive technique for characterizing the microstructure of dense silicon carbide ceramics. Acoustic waves interact elastically with grains and inclusions in large sample volumes, and were well suited to determine concentration and size distribution variations for solid inclusions. Methodology was developed for rapid acquisition and analysis of attenuation coefficient spectra. Measurements were conducted at individual points and over large sample areas using a novel technique entitled scanning acoustic spectroscopy. Loss spectra were split into absorption and scattering dominant frequency regimes to simplify analysis. The primary absorption mechanism in polycrystalline silicon carbide was identified as thermoelastic in nature. Correlations between microstructural conditions and parameters within the absorption equation were established through study of commercial and custom engineered SiC materials. Nonlinear least squares regression analysis was used to estimate the size distributions of boron carbide and carbon inclusions within commercial SiC materials. This technique was shown to additionally be capable of approximating grain size distributions in engineered SiC materials which did not contain solid inclusions. Comparisons to results from electron microscopy exhibited favorable agreement between predicted and observed distributions. Developed techniques were applied to large sample areas using scanning acoustic spectroscopy to map variations in the size distribution and concentration of grains and solid inclusions within the bulk microstructure. The experiments performed in this thesis form the foundation of a novel characterization technique capable of mapping variations in sample composition which could be extended to a wide range of dense polycrystalline heterogeneous materials.

Simulation of multiple personalities: a review of research comparing diagnosed and simulated dissociative identity disorder.

PubMed

Boysen, Guy A; VanBergen, Alexandra

2014-02-01

Dissociative Identity Disorder (DID) has long been surrounded by controversy due to disagreement about its etiology and the validity of its associated phenomena. Researchers have conducted studies comparing people diagnosed with DID and people simulating DID in order to better understand the disorder. The current research presents a systematic review of this DID simulation research. The literature consists of 20 studies and contains several replicated findings. Replicated differences between the groups include symptom presentation, identity presentation, and cognitive processing deficits. Replicated similarities between the groups include interidentity transfer of information as shown by measures of recall, recognition, and priming. Despite some consistent findings, this research literature is hindered by methodological flaws that reduce experimental validity. Copyright © 2013 Elsevier Ltd. All rights reserved.

Comments on "Failures in detecting volcanic ash from a satellite-based technique"

USGS Publications Warehouse

Prata, F.; Bluth, G.; Rose, B.; Schneider, D.; Tupper, A.

2001-01-01

The recent paper by Simpson et al. [Remote Sens. Environ. 72 (2000) 191.] on failures to detect volcanic ash using the 'reverse' absorption technique provides a timely reminder of the danger that volcanic ash presents to aviation and the urgent need for some form of effective remote detection. The paper unfortunately suffers from a fundamental flaw in its methodology and numerous errors of fact and interpretation. For the moment, the 'reverse' absorption technique provides the best means for discriminating volcanic ash clouds from meteorological clouds. The purpose of our comment is not to defend any particular algorithm; rather, we point out some problems with Simpson et al.'s analysis and re-state the conditions under which the 'reverse' absorption algorithm is likely to succeed. ?? 2001 Elsevier Science Inc. All rights reserved.

Does sadness impair color perception? Flawed evidence and faulty methods.

PubMed

Holcombe, Alex O; Brown, Nicholas J L; Goodbourn, Patrick T; Etz, Alexander; Geukes, Sebastian

2016-01-01

In their 2015 paper, Thorstenson, Pazda, and Elliot offered evidence from two experiments that perception of colors on the blue-yellow axis was impaired if the participants had watched a sad movie clip, compared to participants who watched clips designed to induce a happy or neutral mood. Subsequently, these authors retracted their article, citing a mistake in their statistical analyses and a problem with the data in one of their experiments. Here, we discuss a number of other methodological problems with Thorstenson et al.'s experimental design, and also demonstrate that the problems with the data go beyond what these authors reported. We conclude that repeating one of the two experiments, with the minor revisions proposed by Thorstenson et al., will not be sufficient to address the problems with this work.

Comparison of two views of maximum entropy in biodiversity: Frank (2011) and Pueyo et al. (2007).

PubMed

Pueyo, Salvador

2012-05-01

An increasing number of authors agree in that the maximum entropy principle (MaxEnt) is essential for the understanding of macroecological patterns. However, there are subtle but crucial differences among the approaches by several of these authors. This poses a major obstacle for anyone interested in applying the methodology of MaxEnt in this context. In a recent publication, Frank (2011) gives some arguments why his own approach would represent an improvement as compared to the earlier paper by Pueyo et al. (2007) and also to the views by Edwin T. Jaynes, who first formulated MaxEnt in the context of statistical physics. Here I show that his criticisms are flawed and that there are fundamental reasons to prefer the original approach.

Comparison of two views of maximum entropy in biodiversity: Frank (2011) and Pueyo et al. (2007)

PubMed Central

Pueyo, Salvador

2012-01-01

An increasing number of authors agree in that the maximum entropy principle (MaxEnt) is essential for the understanding of macroecological patterns. However, there are subtle but crucial differences among the approaches by several of these authors. This poses a major obstacle for anyone interested in applying the methodology of MaxEnt in this context. In a recent publication, Frank (2011) gives some arguments why his own approach would represent an improvement as compared to the earlier paper by Pueyo et al. (2007) and also to the views by Edwin T. Jaynes, who first formulated MaxEnt in the context of statistical physics. Here I show that his criticisms are flawed and that there are fundamental reasons to prefer the original approach. PMID:22837843

The incidence and role of negative citations in science

PubMed Central

Catalini, Christian; Lacetera, Nicola; Oettl, Alexander

2015-01-01

Citations to previous literature are extensively used to measure the quality and diffusion of knowledge. However, we know little about the different ways in which a study can be cited; in particular, are papers cited to point out their merits or their flaws? We elaborated a methodology to characterize “negative” citations using bibliometric data and natural language processing. We found that negative citations concerned higher-quality papers, were focused on a study’s findings rather than theories or methods, and originated from scholars who were closer to the authors of the focal paper in terms of discipline and social distance, but not geographically. Receiving a negative citation was also associated with a slightly faster decline in citations to the paper in the long run. PMID:26504239

Note of the methodological flaws in the paper entitled "Polymorphisms in IL-4/IL-13 pathway genes and glioma risk: an updated meta-analysis".

PubMed

Wang, Ting-Ting; Li, Jin-Mei; Zhou, Dong

2016-01-01

With great interest, we read the paper "Polymorphisms in IL-4/IL-13 pathway genes and glioma risk: an updated meta-analysis" (by Chen PQ et al.) [1], which has reached important conclusions about the relationship between polymorphisms in interleukin (IL)-4/IL-13 pathway genes and glioma risk. Through quantitative analysis, the meta-analysis found no association between IL-4/IL-13 pathway genetic polymorphisms and glioma risk (Chen et al. in Tumor Biol 36:121-127, 2015). The meta-analysis is the most comprehensive study of polymorphisms in the IL-4/IL-13 pathway and glioma risk. Nevertheless, some deficiencies still exist in this meta-analysis that we would like to raise.

Ensuring safe operation and assessing the condition underground structures by the method of acoustic resonance flaw detection

NASA Astrophysics Data System (ADS)

Meskhi, Besarion; Pleshko, Mikhail; Buligin, Yuriy; Alexeenko, Lyudmila; Molev, Mikhail

2017-10-01

In the article the main results of theoretical and experimental research in the field of nondestructive testing and forecasting of the geomechanical state of the dome part of transport tunnels. It is shown that for this purpose it is possible to apply the acoustic resonance defectoscopy method. The method of mine measurements consisted in fixing the forced oscillations of a multilayer carbon-rock massif with the shock initiation of a seismoacoustic signal. The excitation and reception of acoustic standing waves were carried out in the lower rock layer. The actual characteristics of the efficiency of the acoustic assessment of the state of the geoenvironment provide the authors the opportunity to recommend the described methodology for mass practical application in the transport tunnels.

Effectiveness of Aquatic Exercise and Balneotherapy: A Summary of Systematic Reviews Based on Randomized Controlled Trials of Water Immersion Therapies

PubMed Central

Kamioka, Hiroharu; Tsutani, Kiichiro; Okuizumi, Hiroyasu; Mutoh, Yoshiteru; Ohta, Miho; Handa, Shuichi; Okada, Shinpei; Kitayuguchi, Jun; Kamada, Masamitsu; Shiozawa, Nobuyoshi; Honda, Takuya

2010-01-01

Background The objective of this review was to summarize findings on aquatic exercise and balneotherapy and to assess the quality of systematic reviews based on randomized controlled trials. Methods Studies were eligible if they were systematic reviews based on randomized clinical trials (with or without a meta-analysis) that included at least 1 treatment group that received aquatic exercise or balneotherapy. We searched the following databases: Cochrane Database Systematic Review, MEDLINE, CINAHL, Web of Science, JDream II, and Ichushi-Web for articles published from the year 1990 to August 17, 2008. Results We found evidence that aquatic exercise had small but statistically significant effects on pain relief and related outcome measures of locomotor diseases (eg, arthritis, rheumatoid diseases, and low back pain). However, long-term effectiveness was unclear. Because evidence was lacking due to the poor methodological quality of balneotherapy studies, we were unable to make any conclusions on the effects of intervention. There were frequent flaws regarding the description of excluded RCTs and the assessment of publication bias in several trials. Two of the present authors independently assessed the quality of articles using the AMSTAR checklist. Conclusions Aquatic exercise had a small but statistically significant short-term effect on locomotor diseases. However, the effectiveness of balneotherapy in curing disease or improving health remains unclear. PMID:19881230

Analysis of unclad and sub-clad semi-elliptical flaws in pressure vessel steels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Irizarry-Quinones, H.; Macdonald, B.D.; McAfee, W.J.

This study was conducted to support warm prestressing experiments on unclad and sub-clad flawed beams loaded in pure bending. Two cladding yield strengths were investigated: 0.6 Sy and 0.8 Sy, where Sy is the yield strength of the base metal. Cladding and base metal were assumed to be stress free at the stress relief temperature for the 3D elastic-plastic finite element analysis used to model the experiments. The model results indicated that when cooled from the stress relief temperature, the cladding was put in tension due to its greater coefficient of thermal expansion. When cooled, the cladding exhibited various amountsmore » of tensile yielding. The degree of yielding depended on the amount of cooling and the strength of the cladding relative to that of the base metal. When subjected to tensile bending stress, the sub-clad flaw elastic-plastic stress intensity factor, K{sub I}(J), was at first dominated by crack closing force due to tensile yielding in the cladding. Thus, imposed loads initially caused no increase in K{sub I}(J) near the clad-base interface. However, K{sub I}(J) at the flaw depth was little affected. When the cladding residual stress was overcome, K{sub I}(J) gradually increased until the cladding began to flow. Thereafter, the rate at which K{sub I}(J) increased with load was the same as that of an unclad beam. A plastic zone corrected K{sub I} approximation for the unclad flaw was found by the superposition of standard Newman and Raju solutions with those due to a cladding crack closure force approximated by the Kaya and Erdogan solution. These elastic estimates of the effect of cladding in reducing the crack driving force were quite in keeping with the 3D elastic-plastic finite element solution for the sub-clad flaw. The results were also compared with the analysis of clad beam experiments by Keeney and the conclusions by Miyazaki, et al. A number of sub-clad flaw specimens not subjected to warm prestressing were thought to have suffered degraded toughness caused by locally intensified strain aging embrittlement (LISAE) due to welding over the preexisting flaw.« less

Determining Remaining Useful Life of Aging Cables in Nuclear Power Plants – Interim Study FY13

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simmons, Kevin L.; Fifield, Leonard S.; Westman, Matthew P.

2013-09-27

The most important criterion for cable performance is its ability to withstand a design-basis accident. With nearly 1000 km of power, control, instrumentation, and other cables typically found in an NPP, it would be a significant undertaking to inspect all of the cables. Degradation of the cable jacket, electrical insulation, and other cable components is a key issue that is likely to affect the ability of the currently installed cables to operate safely and reliably for another 20 to 40 years beyond the initial operating life. The development of one or more nondestructive evaluation (NDE) techniques and supporting models thatmore » could assist in determining the remaining life expectancy of cables or their current degradation state would be of significant interest. The ability to nondestructively determine material and electrical properties of cable jackets and insulation without disturbing the cables or connections has been deemed essential. Currently, the only technique accepted by industry to measure cable elasticity (the gold standard for determining cable insulation degradation) is the indentation measurement. All other NDE techniques are used to find flaws in the cable and do not provide information to determine the current health or life expectancy. There is no single NDE technique that can satisfy all of the requirements needed for making a life-expectancy determination, but a wide range of methods have been evaluated for use in NPPs as part of a continuous evaluation program. The commonly used methods are indentation and visual inspection, but these are only suitable for easily accessible cables. Several NDE methodologies using electrical techniques are in use today for flaw detection but there are none that can predict the life of a cable. There are, however, several physical and chemical ptoperty changes in cable insulation as a result of thermal and radiation damage. In principle, these properties may be targets for advanced NDE methods to provide early warning of aging and degradation. Examples of such key indicators include changes in chemical structure, mechanical modulus, and dielectric permittivity. While some of these indicators are the basis of currently used technologies, there is a need to increase the volume of cable that may be inspected with a single measurement, and if possible, to develop techniques for in-situ inspection (i.e., while the cable is in operation). This is the focus of the present report.« less

Terrorism, Radicalisation, Extremism, Authoritarianism and Fundamentalism: A Systematic Review of the Quality and Psychometric Properties of Assessments.

PubMed

Scarcella, Akimi; Page, Ruairi; Furtado, Vivek

2016-01-01

Currently, terrorism and suicide bombing are global psychosocial processes that attracts a growing number of psychological and psychiatric contributions to enhance practical counter-terrorism measures. The present study is a systematic review that explores the methodological quality reporting and the psychometric soundness of the instruments developed to identify risk factors of terrorism, extremism, radicalisation, authoritarianism and fundamentalism. A systematic search strategy was established to identify instruments and studies developed to screen individuals at risk of committing extremist or terrorist offences using 20 different databases across the fields of law, medicine, psychology, sociology and politics. Information extracted was consolidated into two different tables and a 26-item checklist, reporting respectively background information, the psychometric properties of each tool, and the methodological quality markers of these tools. 37 articles met our criteria, which included a total of 4 instruments to be used operationally by professionals, 17 tools developed as research measures, and 9 inventories that have not been generated from a study. Just over half of the methodological quality markers required for a transparent methodological description of the instruments were reported. The amount of reported psychological properties was even fewer, with only a third of them available across the different studies. The category presenting the least satisfactory results was that containing the 4 instruments to be used operationally by professionals, which can be explained by the fact that half of them refrained from publishing the major part of their findings and relevant guidelines. A great number of flaws have been identified through this systematic review. The authors encourage future researchers to be more thorough, comprehensive and transparent in their methodology. They also recommend the creation of a multi-disciplinary joint working group in order to best tackle this growing contemporary problem.

Screening for oropharyngeal dysphagia in older adults: A systematic review of self-reported questionnaires.

PubMed

Magalhães Junior, Hipólito V; Pernambuco, Leandro de Araújo; Lima, Kenio C; Ferreira, Maria Angela F

2018-04-03

Oropharyngeal dysphagia is a swallowing disorder with signs and symptoms which may be present in older adults, but they are rarely noticed as a health concern by older people. The earliest possible identification of this clinical condition is needed by self-reported population-based screening questionnaire, which are valid and reliable for preventing risks to nutritional status, increased morbidity and mortality. The aim of this systematic review was to identify self-reported screening questionnaires for oropharyngeal dysphagia in older adults to evaluate their methodological quality for population-based studies. An extensive search of electronic databases (PubMed (MEDLINE), Ovid MEDLINE(R), Scopus, Cochrane Library, CINAHL, Web of Science (WOS), PsycINFO (APA), Lilacs and Scielo) was conducted in the period from April to May 2017 using previously established search strategies by the two evaluators. The methodological quality and the psychometric properties of the included studies were evaluated by the COSMIN (Consensus based Standards for the selection of health Measurement Instruments) checklist and the quality criteria of Terwee and colleagues, respectively. The analysed information was extracted from three articles which had conducted studies on the prevalence of oropharyngeal dysphagia by self-reported screening questionnaires, showing poor methodological quality and flaws in the methodological description to demonstrate its psychometric properties. This study did not find any self-reported screening questionnaires for oropharyngeal dysphagia with suitable methodological quality and appropriate evidence in its psychometric properties for elders. Therefore, the self-reported questionnaires within the diagnostic proposal require greater details in its process for obtaining valid and reliable evidence. © 2018 John Wiley & Sons A/S and The Gerodontology Association. Published by John Wiley & Sons Ltd.

The Operating System Jungle: Finding a Common Path Keeps Getting More Difficult.

ERIC Educational Resources Information Center

Pournelle, Jerry

1984-01-01

Describes the computer field before the advent of CP/M (Control Program for Microcomputers), an operating system which facilitated compatibility between different computers. CP/M's functions and flaws and the advent of Apple DOS and UCSD Pascal, two additional widely used operating systems, and the significance of their development are also…

"Are We Almost There, Captain?" The Geographical Errors of Christopher Columbus.

ERIC Educational Resources Information Center

Edwards, Glenn M.

1992-01-01

Discusses the scientific knowledge available to Christopher Columbus and how it influenced his geographically flawed, yet historically significant, decision to sail west in order to travel east. Factors discussed include Aristotle's conclusion that the earth was round, early measurements of latitude and longitude, and early map-making attempts.…

Effectiveness of Computers in ALBE Classrooms: An Analytical Review of the Literature.

ERIC Educational Resources Information Center

Berger, Jim I.

2001-01-01

Review of 23 studies on the effectiveness of computers in adult literacy and basic education indicated that just under half found statistically significant improvements in reading scores. Many studies evidenced design flaws, lacked clear descriptions of the research, or were hampered by classroom-related difficulties. (Contains 31 references.) (SK)

Charter Schools: Another Flawed Educational Reform? The Series on School Reform.

ERIC Educational Resources Information Center

Sarason, Seymour B.

This book examines why most charter schools will fail. It opens with a historical overview, describing the fate and significance of the precursor to charter schools: President Nixon's Experimental Schools Program. It then turns to the author's personal experiences in educational theory and practice, presenting and discussing the essential features…

The New ERA of Journal Ranking: The Consequences of Australia's Fraught Encounter with "Quality"

ERIC Educational Resources Information Center

Cooper, Simon; Poletti, Anna

2011-01-01

Ranking scholarly journals forms a major feature of the Excellence in Research for Australia (ERA) initiative. We argue this process is not only a flawed system of measurement, but more significantly erodes the very contexts that produce "quality" research. We argue that collegiality, networks of international research, the…

The Significance of Small Cracks in Fatigue Design Concepts as Related to Rotorcraft Metallic Dynamic Components

NASA Technical Reports Server (NTRS)

Everett, R. A., Jr.; Elber, W.

2000-01-01

In this paper the significance of the "small" crack effect as defined in fracture mechanics will be discussed as it relates to life managing rotorcraft dynamic components using the conventional safe-life, the flaw tolerant safe-life, and the damage tolerance design philosophies. These topics will be introduced starting with an explanation of the small-crack theory, then showing how small-crack theory has been used to predict the total fatigue life of fatigue laboratory test coupons with and without flaws, and concluding with how small cracks can affect the crack-growth damage tolerance design philosophy. As stated in this paper the "small" crack effect is defined in fracture mechanics where it has been observed that cracks on the order of 300 microns or less in length will propagate at higher growth rates than long cracks and also will grow at AK values below the long crack AK threshold. The small-crack effect is illustrated herein as resulting from a lack of crack closure and is explained based on continuum mechanics principles using crack-closure concepts in fracture mechanics.

Holographic analysis as an inspection method for welded thin-wall tubing

NASA Technical Reports Server (NTRS)

Brooks, Lawrence; Mulholland, John; Genin, Joseph; Matthews, Larryl

1990-01-01

The feasibility of using holographic interferometry for locating flaws in welded tubing is explored. Two holographic techniques are considered: traditional holographic interferometry and electronic speckle pattern interferometry. Several flaws including cold laps, discontinuities, and tube misalignments are detected.

Imaging flaws in thin metal plates using a magneto-optic device

NASA Technical Reports Server (NTRS)

Wincheski, B.; Prabhu, D. R.; Namkung, M.; Birt, E. A.

1992-01-01

An account is given of the capabilities of the magnetooptic/eddy-current imager (MEI) apparatus in the case of aging aircraft structure-type flaws in 2024-T3 Al alloy plates. Attention is given to images of cyclically grown fatigue cracks from rivetted joints in fabricated lap-joint structures, electrical discharge machining notches, and corrosion spots. Although conventional eddy-current methods could have been used, the speed and ease of MEI's use in these tests is unmatched by such means. Results are displayed in real time as a test piece is scanned, furnishing easily interpreted flaw images.

Electromagnetic radiation screening of microcircuits for long life applications

NASA Technical Reports Server (NTRS)

Brammer, W. G.; Erickson, J. J.; Levy, M. E.

1974-01-01

The utility of X-rays as a stimulus for screening high reliability semiconductor microcircuits was studied. The theory of the interaction of X-rays with semiconductor materials and devices was considered. Experimental measurements of photovoltages, photocurrents, and effects on specified parameters were made on discrete devices and on microcircuits. The test specimens included discrete devices with certain types of identified flaws and symptoms of flaws, and microcircuits exhibiting deviant electrical behavior. With a necessarily limited sample of test specimens, no useful correlation could be found between the X-ray-induced electrical response and the known or suspected presence of flaws.

Internal Rot Detection with the Use of Low-Frequency Flaw Detector

NASA Astrophysics Data System (ADS)

Proskórnicki, Marek; Ligus, Grzegorz

2014-12-01

The issue of rot detection in standing timber or stocked wood is very important in forest management. Rot flaw detection used for that purpose is represented by invasive and non-invasive devices. Non-invasive devices are very accurate, but due to the cost and complicated operation they have not been applied on a large scale in forest management. Taking into account the practical needs of foresters a prototype of low-frequency flaw was developed. The principle of its operation is based on the difference in acoustic wave propagation in sound wood and wood with rot.

Computer Tomography Analysis of Fastrac Composite Thrust Chamber Assemblies

NASA Technical Reports Server (NTRS)

Beshears, Ronald D.

2000-01-01

Computed tomography (CT) inspection has been integrated into the production process for NASA's Fastrac composite thrust chamber assemblies (TCAs). CT has been proven to be uniquely qualified to detect the known critical flaw for these nozzles, liner cracks that are adjacent to debonds between the liner and overwrap. CT is also being used as a process monitoring tool through analysis of low density indications in the nozzle overwraps. 3d reconstruction of CT images to produce models of flawed areas is being used to give program engineers better insight into the location and nature of nozzle flaws.

[Preliminary analysis about influence of porcelain thickness on interfacial crack of PFM].

PubMed

Zhu, Ziyuan; Zhang, Baowei; Zhang, Xiuyin; Xu, Kan; Fang, Ruhua; Wang, Dongmei

2002-01-01

This study was about the influence of porcelain thickness on crack at interface. The effect of porcelain thickness on the flaw at the interface between porcelain and metal was studied in three groups with porcelain thickness of 0.5 mm, 1.5 mm and 2.5 mm (metal thickness of 0.5 mm) by means of moire interferometre and interfacial fracture mechanics. The parameter Jc was compared among the three groups and the growing of the flaw was observed. Jc and the extreme strength of group with porcelain thickness of 0.5 mm (2.813 N/m and 9.979 N) were lower than those of the groups with porcelain thickness of 1.5 mm and 2.5 mm (5.395 N/m, 19.134 N and 5.429 N/m, 19.256 N). Flaws extend along the interface in the groups with porcelain thickness of 1.5 mm and 0.5 mm. (1) Fracture resistance of the interface in the groups with porcelain thickness of 1.5 mm and 2.5 mm is similar and it decreases in the group with 0.5 mm thick porcelain. (2) When porcelain is 1.5 mm or 0.5 mm thick, flaws will extend along the interface. When porcelain is 2.5 mm thick, flaws will extend into the porcelain layer.

Do item-writing flaws reduce examinations psychometric quality?

PubMed

Pais, João; Silva, Artur; Guimarães, Bruno; Povo, Ana; Coelho, Elisabete; Silva-Pereira, Fernanda; Lourinho, Isabel; Ferreira, Maria Amélia; Severo, Milton

2016-08-11

The psychometric characteristics of multiple-choice questions (MCQ) changed when taking into account their anatomical sites and the presence of item-writing flaws (IWF). The aim is to understand the impact of the anatomical sites and the presence of IWF in the psychometric qualities of the MCQ. 800 Clinical Anatomy MCQ from eight examinations were classified as standard or flawed items and according to one of the eight anatomical sites. An item was classified as flawed if it violated at least one of the principles of item writing. The difficulty and discrimination indices of each item were obtained. 55.8 % of the MCQ were flawed items. The anatomical site of the items explained 6.2 and 3.2 % of the difficulty and discrimination parameters and the IWF explained 2.8 and 0.8 %, respectively. The impact of the IWF was heterogeneous, the Writing the Stem and Writing the Choices categories had a negative impact (higher difficulty and lower discrimination) while the other categories did not have any impact. The anatomical site effect was higher than IWF effect in the psychometric characteristics of the examination. When constructing MCQ, the focus should be in the topic/area of the items and only after in the presence of IWF.

Thermal Characterization of Defects in Aircraft Structures Via Spatially Controlled Heat Application

NASA Technical Reports Server (NTRS)

Cramer, K. Elliott; Winfree, William P.

1997-01-01

Recent advances in thermal imaging technology have spawned a number of new thermal NDE techniques that provide quantitative information about flaws in aircraft structures. Thermography has a number of advantages as an inspection technique. It is a totally noncontacting, nondestructive, imaging technology capable of inspecting a large area in a matter of a few seconds. The development of fast, inexpensive image processors have aided in the attractiveness of thermography as an NDE technique. These image processors have increased the signal to noise ratio of thermography and facilitated significant advances in post-processing. The resulting digital images enable archival records for comparison with later inspections thus providing a means of monitoring the evolution of damage in a particular structure. The National Aeronautics and Space Administration's Langley Research Center has developed a thermal NDE technique designed to image a number of potential flaws in aircraft structures. The technique involves injecting a small, spatially controlled heat flux into the outer surface of an aircraft. Images of fatigue cracking, bond integrity and material loss due to corrosion are generated from measurements of the induced surface temperature variations. This paper will present a discussion of the development of the thermal imaging system as well as the techniques used to analyze the resulting thermal images. Spatial tailoring of the heat coupled with the analysis techniques represent a significant improvement in the delectability of flaws over conventional thermal imaging. Results of laboratory experiments on fabricated crack, disbond and material loss samples will be presented to demonstrate the capabilities of the technique. An integral part of the development of this technology is the use of analytic and computational modeling. The experimental results will be compared with these models to demonstrate the utility of such an approach.

Definition of Mutually Optimum NDI and Proof Test Criteria for 2219 Aluminum Pressure Vessels. Volume 2: Optimization and Fracture Studies

NASA Technical Reports Server (NTRS)

Schwartzberg, F. R.; Toth, C., Jr.; King, R. G.; Todd, P. H., Jr.

1979-01-01

Certain behavioral aspects associated with fracture and crack extension that cannot be studied using other techniques were evaluated with the ultrasonic method. Characterization of collimated beam techniques showed that significant beam width reduction could be accomplished. Techniques for collimation are given. The crack-opening displacement-gage correction-factor study showed that displacement resulting from crack opening and that from plasticity could be readily differentiated. Crack closure studies using both ultrasonic and crack-opening displacement measurements showed an opening and closing behavior associated with load-unload curves. The results of this work were in general agreement with the closure concepts of Elber. Ultrasonic measurements used to study the nature of flaw extension characteristics associated with failure of the ligament between the flaw front and back surface showed that penetration could occur by an abrupt fracturing after subcritical growth or by continuous growth.

Development and Application of Wide Bandwidth Magneto-Resistive Sensor Based Eddy Current Probe

NASA Technical Reports Server (NTRS)

Wincheski, Russell A.; Simpson, John

2010-01-01

The integration of magneto-resistive sensors into eddy current probes can significantly expand the capabilities of conventional eddy current nondestructive evaluation techniques. The room temperature solid-state sensors have typical bandwidths in the megahertz range and resolutions of tens of microgauss. The low frequency sensitivity of magneto-resistive sensors has been capitalized upon in previous research to fabricate very low frequency eddy current sensors for deep flaw detection in multilayer conductors. In this work a modified probe design is presented to expand the capabilities of the device. The new probe design incorporates a dual induction source enabling operation from low frequency deep flaw detection to high frequency high resolution near surface material characterization. Applications of the probe for the detection of localized near surface conductivity anomalies are presented. Finite element modeling of the probe is shown to be in good agreement with experimental measurements.

Identifying depression post-stroke in patients with aphasia: a systematic review of the reliability, validity and feasibility of available instruments.

PubMed

van Dijk, Mariska J; de Man-van Ginkel, Janneke M; Hafsteinsdóttir, Thóra B; Schuurmans, Marieke J

2016-08-01

To identify and critically appraise the evidence for instruments assessing depression in stroke patients with aphasia. The PubMed, CINAHL, Web of Science, Psych Info and Cochrane databases were searched from inception until May 2015. Of the 383 titles found in the search, 15 articles met the inclusion criteria and six instruments were identified: The Aphasic Depression Rating Scale, the Clinical Global Impression-Scale, the Stroke Aphasic Depression Questionnaire (four versions), the Signs of Depression Scale, the Visual Analogue Mood Scale (three versions) and the Visual Analogue Self Esteem Scale. Supporting evidence for reliability and validity was limited owing to methodological flaws in the studies influencing the ratings of methodological quality. Feasibility data were available for all instruments. Rating time of the instruments ranged from less than one minute to five minutes, two instruments required extensive training. A number of instruments to assess depressive symptoms in patients with aphasia are available. None of the instruments however, were found to be sufficiently investigated and most of the studies identified were of low methodological quality. Given the present evidence, the Stroke Aphasic Depression Questionnaire-10, the Stroke Aphasic Depression Questionnaire-H10 and the Signs of Depression Scale are the most feasible and can be recommended for clinical practice. © The Author(s) 2015.

Feasibility of Flaw Detection in Railroad Wheels Using Acoustic Signatures

DOT National Transportation Integrated Search

1976-10-01

The feasibility study on the use of acoustic signatures for detection of flaws in railway wheels was conducted with the ultimate objective of development of an intrack device for moving cars. Determinations of the natural modes of vibrating wheels un...

Prevention of design flaws in multicomputer systems

NASA Technical Reports Server (NTRS)

1975-01-01

Multicomputer configurations and redundancy management techniques used in various airborne systems were investigated to determine methods to prevent and/or treat generic design flaws. The findings are intended for use in the design of a computer system for use in the space shuttle orbiter.

A systematic review of randomized controlled trials and reviews in the management of ventral hernias.

PubMed

Holihan, Julie L; Nguyen, Duyen H; Flores-Gonzalez, Juan R; Alawadi, Zeinab M; Nguyen, Mylan T; Ko, Tien C; Kao, Lillian S; Liang, Mike K

2016-08-01

The literature supporting ventral hernia management is growing; however, it is unclear whether the quality of work is improving. We hypothesize that the quality of clinical ventral hernia research has improved over the past 2.5 decades. A review of MEDLINE, Scopus, and Cochrane databases was conducted for all ventral hernia studies from January 1, 1980 to May 1, 2015. Relevant abstracts were assigned a level according to the Oxford Center for Evidence-Based Medicine. Reviews, and meta-analyses were graded using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Checklist and randomized controlled trials (RCTs) using the Consolidated Standards of Reporting Trials (CONSORT) checklist. Studies that did not fulfill at least 70% of the elements for the PRISMA (19/27) or CONSORT (26/37) checklists were considered to contain substantial methodological flaws. Of 12,431 citations, 1336 met criteria for quality evaluation. Level 1 studies were sparse (n = 104, 7.8%), and most were level 2 or 3 (n = 463, 34.7%) or 4 (n = 769, 57.6%). Of the level 1 studies, 37 (35.6%) were RCTs, 61(58.7%) were reviews and/or meta-analyses, and 6 (5.8%) were consensus statements. Most RCTs and reviews and/or meta-analyses contained substantial methodological flaws (75.7%, 75.8%). Critical areas of weakness in RCTs were explaining losses and exclusions after randomization and/or allocation and reporting determination of sample size. For reviews and/or meta-analyses, areas of weakness were presenting an electronic search strategy and providing an assessment of risk of bias before pooling data. Linear regressions of PRISMA and CONSORT scores demonstrated improvement over time (PRISMA slope 0.95, R(2) = 0.24; CONSORT slope 0.34, R(2) = 0.08). Although the quality of literature guiding ventral hernia management has improved over time, there is room for improvement. Copyright © 2016 Elsevier Inc. All rights reserved.

Probabilistic Fracture Mechanics of Reactor Pressure Vessels with Populations of Flaws

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Benjamin; Backman, Marie; Williams, Paul

This report documents recent progress in developing a tool that uses the Grizzly and RAVEN codes to perform probabilistic fracture mechanics analyses of reactor pressure vessels in light water reactor nuclear power plants. The Grizzly code is being developed with the goal of creating a general tool that can be applied to study a variety of degradation mechanisms in nuclear power plant components. Because of the central role of the reactor pressure vessel (RPV) in a nuclear power plant, particular emphasis is being placed on developing capabilities to model fracture in embrittled RPVs to aid in the process surrounding decisionmore » making relating to life extension of existing plants. A typical RPV contains a large population of pre-existing flaws introduced during the manufacturing process. The use of probabilistic techniques is necessary to assess the likelihood of crack initiation at one or more of these flaws during a transient event. This report documents development and initial testing of a capability to perform probabilistic fracture mechanics of large populations of flaws in RPVs using reduced order models to compute fracture parameters. The work documented here builds on prior efforts to perform probabilistic analyses of a single flaw with uncertain parameters, as well as earlier work to develop deterministic capabilities to model the thermo-mechanical response of the RPV under transient events, and compute fracture mechanics parameters at locations of pre-defined flaws. The capabilities developed as part of this work provide a foundation for future work, which will develop a platform that provides the flexibility needed to consider scenarios that cannot be addressed with the tools used in current practice.« less

Methodological issues and research recommendations for prognosis after mild traumatic brain injury: results of the International Collaboration on Mild Traumatic Brain Injury Prognosis.

PubMed

Kristman, Vicki L; Borg, Jörgen; Godbolt, Alison K; Salmi, L Rachid; Cancelliere, Carol; Carroll, Linda J; Holm, Lena W; Nygren-de Boussard, Catharina; Hartvigsen, Jan; Abara, Uko; Donovan, James; Cassidy, J David

2014-03-01

The International Collaboration on Mild Traumatic Brain Injury (MTBI) Prognosis performed a comprehensive search and critical review of the literature from 2001 to 2012 to update the 2002 best-evidence synthesis conducted by the World Health Organization Collaborating Centre for Neurotrauma, Prevention, Management and Rehabilitation Task Force on the prognosis of MTBI. Of 299 relevant studies, 101 were accepted as scientifically admissible. The methodological quality of the research literature on MTBI prognosis has not improved since the 2002 Task Force report. There are still many methodological concerns and knowledge gaps in the literature. Here we report and make recommendations on how to avoid methodological flaws found in prognostic studies of MTBI. Additionally, we discuss issues of MTBI definition and identify topic areas in need of further research to advance the understanding of prognosis after MTBI. Priority research areas include but are not limited to the use of confirmatory designs, studies of measurement validity, focus on the elderly, attention to litigation/compensation issues, the development of validated clinical prediction rules, the use of MTBI populations other than hospital admissions, continued research on the effects of repeated concussions, longer follow-up times with more measurement periods in longitudinal studies, an assessment of the differences between adults and children, and an account for reverse causality and differential recall bias. Well-conducted studies in these areas will aid our understanding of MTBI prognosis and assist clinicians in educating and treating their patients with MTBI. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

STRengthening analytical thinking for observational studies: the STRATOS initiative.

PubMed

Sauerbrei, Willi; Abrahamowicz, Michal; Altman, Douglas G; le Cessie, Saskia; Carpenter, James

2014-12-30

The validity and practical utility of observational medical research depends critically on good study design, excellent data quality, appropriate statistical methods and accurate interpretation of results. Statistical methodology has seen substantial development in recent times. Unfortunately, many of these methodological developments are ignored in practice. Consequently, design and analysis of observational studies often exhibit serious weaknesses. The lack of guidance on vital practical issues discourages many applied researchers from using more sophisticated and possibly more appropriate methods when analyzing observational studies. Furthermore, many analyses are conducted by researchers with a relatively weak statistical background and limited experience in using statistical methodology and software. Consequently, even 'standard' analyses reported in the medical literature are often flawed, casting doubt on their results and conclusions. An efficient way to help researchers to keep up with recent methodological developments is to develop guidance documents that are spread to the research community at large. These observations led to the initiation of the strengthening analytical thinking for observational studies (STRATOS) initiative, a large collaboration of experts in many different areas of biostatistical research. The objective of STRATOS is to provide accessible and accurate guidance in the design and analysis of observational studies. The guidance is intended for applied statisticians and other data analysts with varying levels of statistical education, experience and interests. In this article, we introduce the STRATOS initiative and its main aims, present the need for guidance documents and outline the planned approach and progress so far. We encourage other biostatisticians to become involved. © 2014 The Authors. Statistics in Medicine published by John Wiley & Sons, Ltd.

Methodological problems in the use of indirect comparisons for evaluating healthcare interventions: survey of published systematic reviews.

PubMed

Song, Fujian; Loke, Yoon K; Walsh, Tanya; Glenny, Anne-Marie; Eastwood, Alison J; Altman, Douglas G

2009-04-03

To investigate basic assumptions and other methodological problems in the application of indirect comparison in systematic reviews of competing healthcare interventions. Survey of published systematic reviews. Inclusion criteria Systematic reviews published between 2000 and 2007 in which an indirect approach had been explicitly used. Identified reviews were assessed for comprehensiveness of the literature search, method for indirect comparison, and whether assumptions about similarity and consistency were explicitly mentioned. The survey included 88 review reports. In 13 reviews, indirect comparison was informal. Results from different trials were naively compared without using a common control in six reviews. Adjusted indirect comparison was usually done using classic frequentist methods (n=49) or more complex methods (n=18). The key assumption of trial similarity was explicitly mentioned in only 40 of the 88 reviews. The consistency assumption was not explicit in most cases where direct and indirect evidence were compared or combined (18/30). Evidence from head to head comparison trials was not systematically searched for or not included in nine cases. Identified methodological problems were an unclear understanding of underlying assumptions, inappropriate search and selection of relevant trials, use of inappropriate or flawed methods, lack of objective and validated methods to assess or improve trial similarity, and inadequate comparison or inappropriate combination of direct and indirect evidence. Adequate understanding of basic assumptions underlying indirect and mixed treatment comparison is crucial to resolve these methodological problems. APPENDIX 1: PubMed search strategy. APPENDIX 2: Characteristics of identified reports. APPENDIX 3: Identified studies. References of included studies.

Traditional Chinese medicine injection for angina pectoris: an overview of systematic reviews.

PubMed

Luo, Jing; Shang, Qinghua; Han, Mei; Chen, Keji; Xu, Hao

2014-01-01

Traditional Chinese medicine (TCM) injection is widely used to treat angina pectoris in China. This overview aims to systematically summarize the general characteristics of systematic reviews (SRs) on TCM injection in treating angina, and assess the methodological and reporting quality of these reviews. We searched PubMed, Embase, the Cochrane Library and four Chinese databases from inception until March 2013. Data were extracted according to a preset form. The AMSTAR and PRISMA checklists were used to explore the methodological quality and reporting characteristics of included reviews, respectively. All data analyses were descriptive. 46 SRs involving over 57,463 participants with angina reviewing 23 kinds of TCM injections were included. The main outcomes evaluated in the reviews were symptoms (43/46, 93.5%), surrogate outcomes (42/46, 91.3%) and adverse events (41/46, 87.0%). Few reviews evaluated endpoints (7/46, 15.2%) and quality of life (1/46, 2.2%). One third of the reviews (16/46, 34.8%) drew definitely positive conclusions while the others (30/46, 65.2%) suggested potential benefits mainly in symptoms, electrocardiogram and adverse events. With many serious flaws such as lack of a protocol and inappropriate data synthesis, the overall methodological and reporting quality of the reviews was limited. While many SRs of TCM injection on the treatment of angina suggested potential benefits or definitely positive effects, stakeholders should not accept the findings of these reviews uncritically due to the limited methodological and reporting quality. Future SRs should be appropriately conducted and reported according to international standards such as AMSTAR and PRISMA, rather than published in large numbers.

Randomized controlled trials of simulation-based interventions in Emergency Medicine: a methodological review.

PubMed

Chauvin, Anthony; Truchot, Jennifer; Bafeta, Aida; Pateron, Dominique; Plaisance, Patrick; Yordanov, Youri

2018-04-01

The number of trials assessing Simulation-Based Medical Education (SBME) interventions has rapidly expanded. Many studies show that potential flaws in design, conduct and reporting of randomized controlled trials (RCTs) can bias their results. We conducted a methodological review of RCTs assessing a SBME in Emergency Medicine (EM) and examined their methodological characteristics. We searched MEDLINE via PubMed for RCT that assessed a simulation intervention in EM, published in 6 general and internal medicine and in the top 10 EM journals. The Cochrane Collaboration risk of Bias tool was used to assess risk of bias, intervention reporting was evaluated based on the "template for intervention description and replication" checklist, and methodological quality was evaluated by the Medical Education Research Study Quality Instrument. Reports selection and data extraction was done by 2 independents researchers. From 1394 RCTs screened, 68 trials assessed a SBME intervention. They represent one quarter of our sample. Cardiopulmonary resuscitation (CPR) is the most frequent topic (81%). Random sequence generation and allocation concealment were performed correctly in 66 and 49% of trials. Blinding of participants and assessors was performed correctly in 19 and 68%. Risk of attrition bias was low in three-quarters of the studies (n = 51). Risk of selective reporting bias was unclear in nearly all studies. The mean MERQSI score was of 13.4/18.4% of the reports provided a description allowing the intervention replication. Trials assessing simulation represent one quarter of RCTs in EM. Their quality remains unclear, and reproducing the interventions appears challenging due to reporting issues.

Quantitative evaluation of hidden defects in cast iron components using ultrasound activated lock-in vibrothermography.

PubMed

Montanini, R; Freni, F; Rossi, G L

2012-09-01

This paper reports one of the first experimental results on the application of ultrasound activated lock-in vibrothermography for quantitative assessment of buried flaws in complex cast parts. The use of amplitude modulated ultrasonic heat generation allowed selective response of defective areas within the part, as the defect itself is turned into a local thermal wave emitter. Quantitative evaluation of hidden damages was accomplished by estimating independently both the area and the depth extension of the buried flaws, while x-ray 3D computed tomography was used as reference for sizing accuracy assessment. To retrieve flaw's area, a simple yet effective histogram-based phase image segmentation algorithm with automatic pixels classification has been developed. A clear correlation was found between the thermal (phase) signature measured by the infrared camera on the target surface and the actual mean cross-section area of the flaw. Due to the very fast cycle time (<30 s/part), the method could potentially be applied for 100% quality control of casting components.

Self-esteem and communal responsiveness toward a flawed partner: the fair-weather care of low-self-esteem individuals.

PubMed

Lemay, Edward P; Clark, Margaret S

2009-06-01

Three studies provide evidence that people with low self-esteem, but not those with high self-esteem, distance themselves from a flawed partner in situations in which the flaws seem likely to reflect negatively on them. Participants with low (but not high) self-esteem reduced their motivation to care for the partner's needs when they felt they might share a partner's salient flaws (Study 1), when they were primed to focus on similarities between themselves and a socially devalued partner (Study 2), and when they learned that their partner was socially incompetent (Study 3). In Study 3, individuals with low (but not high) self-esteem provided less emotional support and experienced more public image threat when they learned that partners were socially incompetent. In addition, all three studies provided evidence that participants' distancing reduced their confidence in the partner's motivation to care for them, suggesting that distancing involves a cost to the self.

Seven Pervasive Statistical Flaws in Cognitive Training Interventions

PubMed Central

Moreau, David; Kirk, Ian J.; Waldie, Karen E.

2016-01-01

The prospect of enhancing cognition is undoubtedly among the most exciting research questions currently bridging psychology, neuroscience, and evidence-based medicine. Yet, convincing claims in this line of work stem from designs that are prone to several shortcomings, thus threatening the credibility of training-induced cognitive enhancement. Here, we present seven pervasive statistical flaws in intervention designs: (i) lack of power; (ii) sampling error; (iii) continuous variable splits; (iv) erroneous interpretations of correlated gain scores; (v) single transfer assessments; (vi) multiple comparisons; and (vii) publication bias. Each flaw is illustrated with a Monte Carlo simulation to present its underlying mechanisms, gauge its magnitude, and discuss potential remedies. Although not restricted to training studies, these flaws are typically exacerbated in such designs, due to ubiquitous practices in data collection or data analysis. The article reviews these practices, so as to avoid common pitfalls when designing or analyzing an intervention. More generally, it is also intended as a reference for anyone interested in evaluating claims of cognitive enhancement. PMID:27148010

An undignified bioethics: there is no method in this madness.

PubMed

De Melo-Martín, Inmaculada

2012-05-01

In a recent article, Alasdair Cochrane argues for the need to have an undignified bioethics. His is not, of course, a call to transform bioethics into an inelegant, pathetic discipline, or one failing to meet appropriate disciplinary standards. His is a call to simply eliminate the concept of human dignity from bioethical discourse. Here I argue that he fails to make his case. I first show that several of the flaws that Cochrane identifies are not flaws of the conceptions of dignity he discusses but rather flaws of his, often problematic, understanding of such conceptions. Second, I argue that Cochrane's case against the concept of human dignity goes too far. I thus show that were one to agree that these are indeed flaws that require that we discard our ethical concepts, then following Cochrane's recommendations would commit us not only to an undignified bioethics, i.e. a bioethics without dignity, but to a bioethics without much ethics at all. © 2010 Blackwell Publishing Ltd.

Characterization of flaws in a tube bundle mock-up for reliability studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kupperman, D.S.; Bakhtiari, S.

1997-02-01

As part of an assessment of in-service inspection of steam generator tubes, the authors will assemble a steam generator mock-up for round robin studies and use as a test bed in evaluating emerging technologies. Progress is reported on the characterization of flaws that will be part of the mock-up. Eddy current and ultrasonic techniques are being evaluated as a means to characterize the flaws in the mock-up tubes before final assembly. Twenty Inconel 600 tubes with laboratory-grown cracks, typical of those to be used in the mock-up, were provided by Pacific Northwest National Laboratory for laboratory testing. After the tubesmore » were inspected with eddy current and ultrasonic techniques, they were destructively analyzed to establish the actual depths, lengths, and profiles of the cracks. The analysis of the results will allow the best techniques to be used for characterizing the flaws in the mock-up tubes.« less

3D Modeling of Ultrasonic Wave Interaction with Disbonds and Weak Bonds

NASA Technical Reports Server (NTRS)

Leckey, C.; Hinders, M.

2011-01-01

Ultrasonic techniques, such as the use of guided waves, can be ideal for finding damage in the plate and pipe-like structures used in aerospace applications. However, the interaction of waves with real flaw types and geometries can lead to experimental signals that are difficult to interpret. 3-dimensional (3D) elastic wave simulations can be a powerful tool in understanding the complicated wave scattering involved in flaw detection and for optimizing experimental techniques. We have developed and implemented parallel 3D elastodynamic finite integration technique (3D EFIT) code to investigate Lamb wave scattering from realistic flaws. This paper discusses simulation results for an aluminum-aluminum diffusion disbond and an aluminum-epoxy disbond and compares results from the disbond case to the common artificial flaw type of a flat-bottom hole. The paper also discusses the potential for extending the 3D EFIT equations to incorporate physics-based weak bond models for simulating wave scattering from weak adhesive bonds.

Scoping Planning Agents With Shared Models

NASA Technical Reports Server (NTRS)

Bedrax-Weiss, Tania; Frank, Jeremy D.; Jonsson, Ari K.; McGann, Conor

2003-01-01

In this paper we provide a formal framework to define the scope of planning agents based on a single declarative model. Having multiple agents sharing a single model provides numerous advantages that lead to reduced development costs and increase reliability of the system. We formally define planning in terms of extensions of an initial partial plan, and a set of flaws that make the plan unacceptable. A Flaw Filter (FF) allows us to identify those flaws relevant to an agent. Flaw filters motivate the Plan Identification Function (PIF), which specifies when an agent is is ready hand control to another agent for further work. PIFs define a set of plan extensions that can be generated from a model and a plan request. FFs and PIFs can be used to define the scope of agents without changing the model. We describe an implementation of PIFsand FFswithin the context of EUROPA, a constraint-based planning architecture, and show how it can be used to easily design many different agents.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montanini, R.; Freni, F.; Rossi, G. L.

This paper reports one of the first experimental results on the application of ultrasound activated lock-in vibrothermography for quantitative assessment of buried flaws in complex cast parts. The use of amplitude modulated ultrasonic heat generation allowed selective response of defective areas within the part, as the defect itself is turned into a local thermal wave emitter. Quantitative evaluation of hidden damages was accomplished by estimating independently both the area and the depth extension of the buried flaws, while x-ray 3D computed tomography was used as reference for sizing accuracy assessment. To retrieve flaw's area, a simple yet effective histogram-based phasemore » image segmentation algorithm with automatic pixels classification has been developed. A clear correlation was found between the thermal (phase) signature measured by the infrared camera on the target surface and the actual mean cross-section area of the flaw. Due to the very fast cycle time (<30 s/part), the method could potentially be applied for 100% quality control of casting components.« less

A Numerical Solution Routine for Investigating Oxidation-Induced Strength Degradation Mechanisms in SiC/SiC Composites

NASA Technical Reports Server (NTRS)

Sullivan, Roy M.

2015-01-01

The stress rupture strength of silicon carbide fiber-reinforced silicon carbide (SiCSiC) composites with a boron nitride (BN) fiber coating decreases with time within the intermediate temperature range of 700-950 C. Various theories have been proposed to explain the cause of the time dependent stress rupture strength. Some previous authors have suggested that the observed composite strength behavior is due to the inherent time dependent strength of the fibers, which is caused by the slow growth of flaws within the fibers. Flaw growth is supposedly enabled by oxidation of free carbon at the grain boundaries. The objective of this paper is to investigate the relative significance of the various theories for the time-dependent strength of SiCSiC composites. This is achieved through the development of a numerically-based progressive failure analysis routine and through the application of the routine to simulate the composite stress rupture tests. The progressive failure routine is a time marching routine with an iterative loop between a probability of fiber survival equation and a force equilibrium equation within each time step. Failure of the composite is assumed to initiate near a matrix crack and the progression of fiber failures occurs by global load sharing. The probability of survival equation is derived from consideration of the strength of ceramic fibers with randomly occurring and slow growing flaws as well as the mechanical interaction between the fibers and matrix near a matrix crack. The force equilibrium equation follows from the global load sharing presumption. The results of progressive failure analyses of the composite tests suggest that the relationship between time and stress-rupture strength is attributed almost entirely to the slow flaw growth within the fibers. Although other mechanisms may be present, they appear to have only a minor influence on the observed time dependent behavior.

Technical flaws in multiple-choice questions in the access exam to medical specialties ("examen MIR") in Spain (2009-2013).

PubMed

Rodríguez-Díez, María Cristina; Alegre, Manuel; Díez, Nieves; Arbea, Leire; Ferrer, Marta

2016-02-03

The main factor that determines the selection of a medical specialty in Spain after obtaining a medical degree is the MIR ("médico interno residente", internal medical resident) exam. This exam consists of 235 multiple-choice questions with five options, some of which include images provided in a separate booklet. The aim of this study was to analyze the technical quality of the multiple-choice questions included in the MIR exam over the last five years. All the questions included in the exams from 2009 to 2013 were analyzed. We studied the proportion of questions including clinical vignettes, the number of items related to an image and the presence of technical flaws in the questions. For the analysis of technical flaws, we adapted the National Board of Medical Examiners (NBME) guidelines. We looked for 18 different issues included in the manual, grouped into two categories: issues related to testwiseness and issues related to irrelevant difficulties. The final number of questions analyzed was 1,143. The percentage of items based on clinical vignettes increased from 50% in 2009 to 56-58% in the following years (2010-2013). The percentage of items based on an image increased progressively from 10% in 2009 to 15% in 2012 and 2013. The percentage of items with at least one technical flaw varied between 68 and 72%. We observed a decrease in the percentage of items with flaws related to testwiseness, from 30% in 2009 to 20% in 2012 and 2013. While most of these issues decreased dramatically or even disappeared (such as the imbalance in the correct option numbers), the presence of non-plausible options remained frequent. With regard to technical flaws related to irrelevant difficulties, no improvement was observed; this is especially true with respect to negative stem questions and "hinged" questions. The formal quality of the MIR exam items has improved over the last five years with regard to testwiseness. A more detailed revision of the items submitted, checking systematically for the presence of technical flaws, could improve the validity and discriminatory power of the exam, without increasing its difficulty.

Flaw growth behavior in thick welded plates of 2219-T87 aluminum at room and cryogenic temperatures

NASA Technical Reports Server (NTRS)

Forman, R. G.; Glorioso, S. V.; Medlock, J. D.

1973-01-01

Axial load fatigue and fracture tests were conducted on thick welded plates of 2219-T87 aluminum alloy to determine the tensile strength properties and the flaw growth behavior in electron beam, gas metal arc, and pulse current gas tungsten arc welds for plates 6.35 centimeters (2.5 in.) thick. The tests were conducted in room temperature air and in liquid nitrogen environments. Specimens were tested in both the as-welded and the aged after welding conditions. The experimental crack growth rate were correlated with theoretical crack growth rate predictions for semielliptical surface flaws.

"Comparison, Understanding and Teacher Education in International Perspective" by Shen-Keng Yang. Book Review.

ERIC Educational Resources Information Center

Clarkson, J. D.

2000-01-01

Notes that Yang's book provides a combination of Eastern and Western philosophy in defining values, aims, and methods of education, research, and teacher preparation programs. Maintains that the book presents important insights into current educational issues. Asserts that problems such as printing errors and significant flaws in arguments add to…

Beyond Racism: Some Opinions about Racialism and American Archaeology

ERIC Educational Resources Information Center

Echo-Hawk, Roger; Zimmerman, Larry J.

2006-01-01

The scrutiny of racism as a cultural practice is well established in scholarship and in American public discourse. The underlying problem of race itself is also a common topic in academic writings and is a matter of ever-increasing consensus in anthropology and biology. But the significance of race as an inherently flawed interpretation of human…

Original Sin and T. E. Hulme's Aesthetics

ERIC Educational Resources Information Center

Kishler, Thomas C.

1976-01-01

T. E. Hulme, a vigorous opponent of romanticism in art, poetry, and philosophy, insisted that the underlying flaw of the romantic view was its rejection of the dogma of Original Sin and the fall of man. His views are explored for the significant bearing they have on the development of aesthetic insight and indirectly on value and outlook.…

Profiling USGA putting greens using GPR - an as-built surveying method

USDA-ARS?s Scientific Manuscript database

Putting greens installed using the United States Golf Association (USGS) specifications have a subsurface infrastructure constructed to exacting standards. It may be difficult to discern those drainage systems that possess installation flaws, as some flaws may not be readily obvious as their being ...

76 FR 74655 - Damage Tolerance and Fatigue Evaluation of Composite Rotorcraft Structures

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-01

... and discrete flaws, and impact or other accidental damage (including the discrete source of the... discrete manufacturing defects or accidental damage, is avoided throughout the operational life or... and discrete flaws, and impact or other accidental damage (including the discrete source of the...

The Case of the Similar Trees.

ERIC Educational Resources Information Center

Meyer, Rochelle Wilson

1982-01-01

A possible logical flaw based on similar triangles is discussed with the Sherlock Holmes mystery, "The Muskgrave Ritual." The possible flaw has to do with the need for two trees to have equal growth rates over a 250-year period in order for the solution presented to work. (MP)

Flawed Mathematical Conceptualizations: Marlon's Dilemma

ERIC Educational Resources Information Center

Garrett, Lauretta

2013-01-01

Adult developmental mathematics students often work under great pressure to complete the mathematics sequences designed to help them achieve success (Bryk & Treisman, 2010). Results of a teaching experiment demonstrate how the ability to reason can be impeded by flaws in students' mental representations of mathematics. The earnestness of the…

Experimental Study on the Growth, Coalescence and Wrapping Behaviors of 3D Cross-Embedded Flaws Under Uniaxial Compression

NASA Astrophysics Data System (ADS)

Zhou, Xiao-Ping; Zhang, Jian-Zhi; Wong, Louis Ngai Yuen

2018-05-01

The crack initiation, growth, wrapping and coalescence of two 3D pre-existing cross-embedded flaws in PMMA specimens under uniaxial compression are investigated. The stress-strain curves of PMMA specimens with 3D cross-embedded flaws are obtained. The tested PMMA specimens exhibit dominant elastic deformation and eventual brittle failure. The experimental results show that four modes of crack initiation and five modes of crack coalescence are observed. The initiations of oblique secondary crack and anti-wing crack in 3D cracking behaviors are first reported as well as the coalescence of anti-wing cracks. Moreover, two types of crack wrapping are found. Substantial wrapping of petal cracks, which includes open and closed modes of wrapping, appears to be the major difference between 2D and 3D cracking behaviors of pre-existing flaws, which are also first reported. Petal crack wraps symmetrically from either the propagated wing cracks or the coalesced wing cracks. Besides, only limited growth of petal cracks is observed, and ultimate failure of specimens is induced by the further growth of the propagated wing crack. The fracture mechanism of the tested PMMA specimens is finally revealed. In addition, the initiation stress and the peak stress versus the geometry of two 3D pre-existing cross-embedded flaws are also investigated in detail.

Determination of Flaw Type and Location Using an Expert Module in Ultrasonic Nondestructive Testing for Weld Inspection

NASA Astrophysics Data System (ADS)

Shahriari, D.; Zolfaghari, A.; Masoumi, F.

2011-01-01

Nondestructive evaluation is explained as nondestructive testing, nondestructive inspection, and nondestructive examination. It is a desire to determine some characteristic of the object or to determine whether the object contains irregularities, discontinuities, or flaws. Ultrasound based inspection techniques are used extensively throughout industry for detection of flaws in engineering materials. The range and variety of imperfections encountered is large, and critical assessment of location, size, orientation and type is often difficult. In addition, increasing quality requirements of new standards and codes of practice relating to fitness for purpose are placing higher demands on operators. Applying of an expert knowledge-based analysis in ultrasonic examination is a powerful tool that can help assure safety, quality, and reliability; increase productivity; decrease liability; and save money. In this research, an expert module system is coupled with ultrasonic examination (A-Scan Procedure) to determine and evaluate type and location of flaws that embedded during welding parts. The processing module of this expert system is implemented based on EN standard to classify welding defects, acceptance condition and measuring of their location via echo static pattern and image processing. The designed module introduces new system that can automate evaluating of the results of A-scan method according to EN standard. It can simultaneously recognize the number and type of defects, and determine flaw position during each scan.

Surface flaw reliability analysis of ceramic components with the SCARE finite element postprocessor program

NASA Technical Reports Server (NTRS)

Gyekenyesi, John P.; Nemeth, Noel N.

1987-01-01

The SCARE (Structural Ceramics Analysis and Reliability Evaluation) computer program on statistical fast fracture reliability analysis with quadratic elements for volume distributed imperfections is enhanced to include the use of linear finite elements and the capability of designing against concurrent surface flaw induced ceramic component failure. The SCARE code is presently coupled as a postprocessor to the MSC/NASTRAN general purpose, finite element analysis program. The improved version now includes the Weibull and Batdorf statistical failure theories for both surface and volume flaw based reliability analysis. The program uses the two-parameter Weibull fracture strength cumulative failure probability distribution model with the principle of independent action for poly-axial stress states, and Batdorf's shear-sensitive as well as shear-insensitive statistical theories. The shear-sensitive surface crack configurations include the Griffith crack and Griffith notch geometries, using the total critical coplanar strain energy release rate criterion to predict mixed-mode fracture. Weibull material parameters based on both surface and volume flaw induced fracture can also be calculated from modulus of rupture bar tests, using the least squares method with known specimen geometry and grouped fracture data. The statistical fast fracture theories for surface flaw induced failure, along with selected input and output formats and options, are summarized. An example problem to demonstrate various features of the program is included.

Diagnosing Alzheimer's disease: a systematic review of economic evaluations.

PubMed

Handels, Ron L H; Wolfs, Claire A G; Aalten, Pauline; Joore, Manuela A; Verhey, Frans R J; Severens, Johan L

2014-03-01

The objective of this study is to systematically review the literature on economic evaluations of interventions for the early diagnosis of Alzheimer's disease (AD) and related disorders and to describe their general and methodological characteristics. We focused on the diagnostic aspects of the decision models to assess the applicability of existing decision models for the evaluation of the recently revised diagnostic research criteria for AD. PubMed and the National Institute for Health Research Economic Evaluation database were searched for English-language publications related to economic evaluations on diagnostic technologies. Trial-based economic evaluations were assessed using the Consensus on Health Economic Criteria list. Modeling studies were assessed using the framework for quality assessment of decision-analytic models. The search retrieved 2109 items, from which eight decision-analytic modeling studies and one trial-based economic evaluation met all eligibility criteria. Diversity among the study objective and characteristics was considerable and, despite considerable methodological quality, several flaws were indicated. Recommendations were focused on diagnostic aspects and the applicability of existing models for the evaluation of recently revised diagnostic research criteria for AD. Copyright © 2014 The Alzheimer's Association. Published by Elsevier Inc. All rights reserved.

Digital design of scaffold for mandibular defect repair based on tissue engineering*

PubMed Central

Liu, Yun-feng; Zhu, Fu-dong; Dong, Xing-tao; Peng, Wei

2011-01-01

Mandibular defect occurs more frequently in recent years, and clinical repair operations via bone transplantation are difficult to be further improved due to some intrinsic flaws. Tissue engineering, which is a hot research field of biomedical engineering, provides a new direction for mandibular defect repair. As the basis and key part of tissue engineering, scaffolds have been widely and deeply studied in regards to the basic theory, as well as the principle of biomaterial, structure, design, and fabrication method. However, little research is targeted at tissue regeneration for clinic repair operations. Since mandibular bone has a special structure, rather than uniform and regular structure in existing studies, a methodology based on tissue engineering is proposed for mandibular defect repair in this paper. Key steps regarding scaffold digital design, such as external shape design and internal microstructure design directly based on triangular meshes are discussed in detail. By analyzing the theoretical model and the measured data from the test parts fabricated by rapid prototyping, the feasibility and effectiveness of the proposed methodology are properly verified. More works about mechanical and biological improvements need to be done to promote its clinical application in future. PMID:21887853

Digital design of scaffold for mandibular defect repair based on tissue engineering.

PubMed

Liu, Yun-feng; Zhu, Fu-dong; Dong, Xing-tao; Peng, Wei

2011-09-01

Mandibular defect occurs more frequently in recent years, and clinical repair operations via bone transplantation are difficult to be further improved due to some intrinsic flaws. Tissue engineering, which is a hot research field of biomedical engineering, provides a new direction for mandibular defect repair. As the basis and key part of tissue engineering, scaffolds have been widely and deeply studied in regards to the basic theory, as well as the principle of biomaterial, structure, design, and fabrication method. However, little research is targeted at tissue regeneration for clinic repair operations. Since mandibular bone has a special structure, rather than uniform and regular structure in existing studies, a methodology based on tissue engineering is proposed for mandibular defect repair in this paper. Key steps regarding scaffold digital design, such as external shape design and internal microstructure design directly based on triangular meshes are discussed in detail. By analyzing the theoretical model and the measured data from the test parts fabricated by rapid prototyping, the feasibility and effectiveness of the proposed methodology are properly verified. More works about mechanical and biological improvements need to be done to promote its clinical application in future.

Effect of Medicinal Herbs on Primary Dysmenorrhoea- a Systematic Review

PubMed Central

Mirabi, Parvaneh; Alamolhoda, Seideh Hanieh; Esmaeilzadeh, Seddigheh; Mojab, Faraz

2014-01-01

Conventional treatment for primary dysmenorrhoea has a failure rate of 20% to 25% and may be contraindicated or not tolerated by some women. Herbal medicine may be a suitable alternative. To determine the efficacy and safety of Iranian herbal medicine for primary dysmenorrhea when compared with placebo, no treatment, and other treatment. Electronic searches of the Cochrane Menstrual Disorders and Dysmenorrhoea Group Register of controlled trials, Scopus, Google Scholar, Medline, Pubmed were performed to identify relevant randomized controlled trials (RCTs). The study abstraction and quality assessment of all studies were undertaken following the detailed descriptions of these categories as described in the JADAD Criteria for Systematic Reviews of Interventions. 25 RCTs involving a total of women were included in the review. The review found promising evidence in the form of RCTs for the use of herbal medicine in the treatment of primary dysmenorrhoea compared with pharmacological treatment. However, the results were limited by methodological flaws. Further rigorous no penetrating placebo-controlled RCTs are warranted. The review found promising evidence supporting the use of herbal medicine for primary dysmenorrhoea; however, results are limited by the poor methodological quality of the included trials. PMID:25276177

Bridging the divide between theory and guidance in strategic environmental assessment: A path for Italian regions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baresi, Umberto, E-mail: u.baresi@uq.edu.au

Clear and effective legislation is a requisite to bring sustainable development from theory into practice. This paper develops a methodology to investigate how Italian regional legislation disciplines the use of Strategic Environmental Assessment (SEA), the procedure used in the European Union (EU) to pursue sustainable development of policies, plans, and programs (PPPs). Our case study is the Italian regional level, examined to identify eventual flaws and areas for improvement for each regional legislative framework. For this purpose, this study refers to a selection of analytical criteria recurring in the international debate on sustainability assessments. Statistical multi-dimensional analysis is used tomore » identify Italian regions with similar SEA legislation. We recognize four taxonomies, depending on the way regional legislation provides information about i) legislation and guidelines, ii) integration between SEA and PPPs, iii) sustainability goals, iv) technical organization, v) participatory organization, and vi) monitoring. The results suggest that Italian administrators should cooperate to improve legislation at the regional level. Acknowledging the institution-centred nature of SEA, this methodology could drive the EU to better support SEA development in countries with diversified traditions.« less