Strategic Planning for Technological Change

ERIC Educational Resources Information Center

Strong, Bart

2007-01-01

Strategic planning can become downright treacherous if one's institution depends heavily on technology, because technology changes course frequently. Technological change is somewhat predictable, and doing nothing is not an option. A number of complex factors hasten technological change. Limits on performance, breakthrough technology, market…

Effects of filtration temperature, humic acid level and alum dose on cryptosporidium sized particle breakthrough.

PubMed

Xu, G R; Fitzpatrick, C S B; Deng, L Y

2006-01-01

Recent Cryptosporidium outbreaks have highlighted concerns about filter efficiency and especially particle breakthrough. Understanding the causes of breakthrough is essential, as the parasite cannot be destroyed by conventional disinfection with chlorine. Particle breakthrough depends on many factors. This research aims to investigate the influence of temperature, humic acid (HA) level and chemical dosing on particle breakthrough in filtration. A series of temperatures were set at 5 degrees C, 15 degrees C and 25 degrees C; humic acid level was 5 mg L(-1). Each was combined with a series of Al doses. A laser particle counter was used to assess the particle breakthrough online. Turbidity, zeta potential, and UV254 absorption were measured before and after filtration. The results showed that particle breakthrough was influenced significantly by temperature, humic acid and dosing. Particle breakthrough occurred earlier at lower temperature, while at higher temperature it was reduced at the same coagulant dose. With coagulants, even at low dose, particle breakthrough was significantly reduced. With HA 5 mg L(-1), particle breakthrough was earlier and the amount was much larger than without HA even at high temperature. There was an optimal dose in filtration and it was well correlated with zeta potential.

National Renewable Energy Laboratory (NREL) Home Page | NREL

Science.gov Websites

the STEM Wheel May 22, 2018 Breakdown Breakthrough: NREL Finds Easier Ways to Deconstruct Biomass May Accelerates Innovation and Adoption of Geothermal Technologies May 18, 2018 Research Turbine Leaves Legacy in and research breakthroughs from NREL. Sign up now Data and Tools Data and Tools Partnership

Breakthrough on technical and vocational education of Taiwan: Take Oriental Institute of Technology as an example

NASA Astrophysics Data System (ADS)

Chang, Horng-jinh; Wang, Whe-min

2017-06-01

Taiwan's economic strength has changed drastically in the past decade because of political and economic reasons; however, in order to cope with international environment, higher education must increase its breakthrough to meet the needs of enterprises. School curriculum also has to be timely changes and adjustments. This study will analyze school learning in several directions, use questionnaire to investigate students' learning stress, to find out where students' pressure lie. Also, outsourcing employers' satisfaction survey to find out what do enterprises wants to solve with the drop problem between school and enterprise. Taking Oriental Institute of Technology (OIT) as an example; over the past ten years, OIT has used overseas internships to help students overcome learning difficulties. Overseas practice courses include Penang Malaysia and Suzhou China had gained tremendous breakthrough.

Efficacy, Safety, and Regulatory Approval of Food and Drug Administration-Designated Breakthrough and Nonbreakthrough Cancer Medicines.

PubMed

Hwang, Thomas J; Franklin, Jessica M; Chen, Christopher T; Lauffenburger, Julie C; Gyawali, Bishal; Kesselheim, Aaron S; Darrow, Jonathan J

2018-04-24

Purpose The breakthrough therapy program was established in 2012 to expedite the development and review of new medicines. We evaluated the times to approval, efficacy, and safety of breakthrough-designated versus non-breakthrough-designated cancer drugs approved by the US Food and Drug Administration (FDA). Methods We studied all new cancer drugs approved by the FDA between January 2012 and December 2017. Regulatory and therapeutic characteristics (time to FDA approval, pivotal trial efficacy end point, novelty of mechanism of action) were compared between breakthrough-designated and non-breakthrough-designated cancer drugs. Random-effects meta-regression was used to assess the association between breakthrough therapy designation and hazard ratios for progression-free survival (PFS), response rates (RRs) for solid tumors, serious adverse events, and deaths not attributed to disease progression. Results Between 2012 and 2017, the FDA approved 58 new cancer drugs, 25 (43%) of which received breakthrough therapy designation. The median time to first FDA approval was 5.2 years for breakthrough-designated drugs versus 7.1 years for non-breakthrough-designated drugs (difference, 1.9 years; P = .01). There were no statistically significant differences between breakthrough-designated and non-breakthrough-designated drugs in median PFS gains (8.6 v 4.0 months; P = .11), hazard ratios for PFS (0.43 v 0.51; P = .28), or RRs for solid tumors (37% v 39%; P = .74). Breakthrough therapy-designated drugs were not more likely to act via a novel mechanism of action (36% v 39%; P = 1.00). Rates of deaths (6% v 4%; P = .99) and serious adverse events (38% v 36%; P = 0.93) were also similar in breakthrough-designated and non-breakthrough-designated drugs. Conclusion Breakthrough-designated cancer drugs were associated with faster times to approval, but there was no evidence that these drugs provide improvements in safety or novelty; nor was there a statistically significant efficacy advantage when compared with non-breakthrough-designated drugs.

EERE Wind and Hydropower Technologies Program Technology Review (Deep Dive) for Under Secretaries Johnson and Koonin

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2009-09-01

September 4, 2009 presentation highlighting the Wind and Hydropower Program, addressing program goals and objectives, budgets, technology pathways, breakthroughs, and DOE solutions to market barriers.

EERE Wind and Hydropower Technologies Program Technology Review (Deep Dive) for Under Secretaries Johnson and Koonin

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCluer, Megan

2009-09-04

September 4, 2009 presentation highlighting the Wind and Hydropower Program, addressing program goals and objectives, budgets, technology pathways, breakthroughs, and DOE solutions to market barriers.

Putting the Spotlight Back on Plant Suspension Cultures

PubMed Central

Santos, Rita B.; Abranches, Rita; Fischer, Rainer; Sack, Markus; Holland, Tanja

2016-01-01

Plant cell suspension cultures have several advantages that make them suitable for the production of recombinant proteins. They can be cultivated under aseptic conditions using classical fermentation technology, they are easy to scale-up for manufacturing, and the regulatory requirements are similar to those established for well-characterized production systems based on microbial and mammalian cells. It is therefore no surprise that taliglucerase alfa (Elelyso®)—the first licensed recombinant pharmaceutical protein derived from plants—is produced in plant cell suspension cultures. But despite this breakthrough, plant cells are still largely neglected compared to transgenic plants and the more recent plant-based transient expression systems. Here, we revisit plant cell suspension cultures and highlight recent developments in the field that show how the rise of plant cells parallels that of Chinese hamster ovary cells, currently the most widespread and successful manufacturing platform for biologics. These developments include medium optimization, process engineering, statistical experimental designs, scale-up/scale-down models, and process analytical technologies. Significant yield increases for diverse target proteins will encourage a gold rush to adopt plant cells as a platform technology, and the first indications of this breakthrough are already on the horizon. PMID:27014320

GMOs in Russia: Research, Society and Legislation

PubMed Central

Korobko, I. V.; Georgiev, P. G.; Skryabin, K. G.; Kirpichnikov, M. P.

2016-01-01

Russian legislation lags behind the rapid developments witnessed in genetic engineering. Only a scientifically based and well-substantiated policy on the place of organisms that are created with the use of genetic engineering technologies and an assessment of the risks associated with them could guarantee that the breakthroughs achieved in modern genetic engineering technologies are effectively put to use in the real economy. A lack of demand for such breakthroughs in the practical field will lead to stagnation in scientific research and to a loss of expertise. PMID:28050262

Transformational Technologies to Expedite Space Access and Development

NASA Astrophysics Data System (ADS)

Rather, John D. G.

2010-01-01

Throughout history the emergence of new technologies has enabled unforeseen breakthrough capabilities that rapidly transformed the world. Some global examples from the twentieth century include AC electric power, nuclear energy, and turbojet engines. At the systems level, success of both Apollo and the Space Shuttle programs depended upon taming hydrogen propulsion and developing high-temperature atmospheric reentry materials. Human space development now is stymied because of a great need for breakthrough technologies and strategies. It is believed that new capabilities exist within the present states-of-the-art of superconducting technology that can be implemented to transform the future of human space development. This paper is an overview of three other papers presented within this forum, which summarizes the principles and consequences of StarTram, showing how the resulting breakthrough advantages can lead directly to safe space tourism and massive development of the moon, Mars and the outer solar system. StarTram can implement cost-effective solar power from space, simple utilization of asteroid material to protect humans from ionizing radiation, and effective defense of the Earth from devastating cosmic impacts. Synergistically, StarTram technologies will revolutionize ground transportation on the Earth, leading to enormous reduction in energy consumption and creation of millions of jobs. High energy lasers will also be discussed because of their importance to power beaming applications.

Advanced interdisciplinary technologies

NASA Technical Reports Server (NTRS)

Anderson, John L.

1990-01-01

The following topics are presented in view graph form: (1) breakthrough trust (space research and technology assessment); (2) bionics (technology derivatives from biological systems); (3) biodynamics (modeling of human biomechanical performance based on anatomical data); and (4) tethered atmospheric research probes.

75 Breakthroughs by the U.S. Department of Energy's National Laboratories; Breakthroughs 2017

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Born at a time when the world faced a dire threat, the National Laboratory System protects America through science and technology. For more than 75 years, the Department of Energy’s national laboratories have solved important problems in science, energy and national security. Partnering with industry and academia, the laboratories also drive innovation to advance economic competitiveness and ensure our nation’s future prosperity. Over the years, America's National Laboratories have been changing and improving the lives of millions of people and this expertise continues to keep our nation at the forefront of science and technology in a rapidly changing world. Thismore » network of Department of Energy Laboratories has grown into 17 facilities across the country. As this list of breakthroughs attests, Laboratory discoveries have spawned industries, saved lives, generated new products, fired the imagination and helped to reveal the secrets of the universe.« less

Science and Technology Test Mining: Disruptive Technology Roadmaps

DTIC Science & Technology

2003-07-23

integrating breakthrough technologies to maintain the U.S.’s technological advantage and the role of naval engineers in fostering and managing innovation . It...highlights these. Loutfy, R, Belkhir, L, Managing innovation at Xerox, RESEARCH-TECHNOLOGY MANAGEMENT, 44:4, July-Aug 2001. The careful and painstaking

Technological Discontinuities and Organizational Environments.

ERIC Educational Resources Information Center

Tushman, Michael L.; Anderson, Philip

1986-01-01

Technological effects on environmental conditions are analyzed using longitudinal data from the minicomputer, cement, and airline industries. Technology evolves through periods of incremental change punctuated by breakthroughs that enhance or destroy the competence of firms. Competence-destroying discontinuities increase environmental turbulence;…

Understanding the Emergence of Disruptive Innovation in Air Force Science and Technology Organizations

DTIC Science & Technology

2008-03-01

respect to various key attributes. Although the principles of low-end and new market disruption play the most significant role in the fluid and...crucial role in the emergence of breakthrough and game changing ideas. By examining these key elements with regard to industry innovation, a base...that help define the key characteristics of an innovative culture: strong customer focus, collaboration, effective processes , creative people

The management of breakthrough cancer pain--educational needs a European nursing survey.

PubMed

Wengström, Y; Rundström, C; Geerling, J; Pappa, T; Weisse, I; Williams, S C; Zavratnik, B; Rustøen, T

2014-01-01

Poorly managed cancer pain is well known to profoundly impact the patient's daily life and interfere with quality of life. Nurses who cared for patients with cancer from 12 European countries participated in a survey of breakthrough cancer pain practice. The purpose was to investigate how nurses assess breakthrough cancer pain, use of standardised tools, confidence in supporting patients and awareness of medications. Responses from 1241 participants showed country variations. The majority of the sample was female, Germany had the highest proportion of male nurses (21.0%), followed by Greece (15.8%). A significantly larger proportion of nurses with longer experience and more education (78.8%) used a comprehensive definition of breakthrough cancer pain. Significant variations in training were found; 71% of Finnish nurses had received training compared with 6% of Greek nurses. Training and using a standardised assessment tool was associated with a significant increase in the nurses' perceived ability to distinguish between breakthrough and background pain. Nurses in countries with the highest proportion of training were most confident in supporting patients. In conclusion, there still exists problems with effective management of patients' breakthrough cancer pain, continuing inability to define the difference between background and breakthrough cancer pain leads to poor treatment. © 2013 John Wiley & Sons Ltd.

Transformational Technologies to Expedite Space Access and Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rather, John D. G.

Throughout history the emergence of new technologies has enabled unforeseen breakthrough capabilities that rapidly transformed the world. Some global examples from the twentieth century include AC electric power, nuclear energy, and turbojet engines. At the systems level, success of both Apollo and the Space Shuttle programs depended upon taming hydrogen propulsion and developing high-temperature atmospheric reentry materials. Human space development now is stymied because of a great need for breakthrough technologies and strategies. It is believed that new capabilities exist within the present states-of-the-art of superconducting technology that can be implemented to transform the future of human space development. Thismore » paper is an overview of three other papers presented within this forum, which summarizes the principles and consequences of StarTram, showing how the resulting breakthrough advantages can lead directly to safe space tourism and massive development of the moon, Mars and the outer solar system. StarTram can implement cost-effective solar power from space, simple utilization of asteroid material to protect humans from ionizing radiation, and effective defense of the Earth from devastating cosmic impacts. Synergistically, StarTram technologies will revolutionize ground transportation on the Earth, leading to enormous reduction in energy consumption and creation of millions of jobs. High energy lasers will also be discussed because of their importance to power beaming applications.« less

A delphi study on health in future India.

PubMed

Rohatgi, K; Rohatgi, P K

1980-07-01

A delphi study was conducted to identify or envision health scenarios in India by the year 2000. Questionnaires consisting of 48 questions on 5 areas (diagnosis and therapy; family planning; pharmaceuticals and drugs; biochemical and biomedical research; health services) were mailed to 250 experts in India. 36 responded. Results were compiled and mailed back to the respondents for changes and comments. 17 people responded. Results of the delphi study shows that policy decisions with respect to compulsory family planning as well as health education at secondary school level will precede further breakthroughs in birth control technology. Non operation reversible sterilization procedures, immunological birth control, Ayurvedic medicines for contraception and abortion, and selection of baby's sex are all possible by 2000 thereafter. Complete eradication of infectious diseases, malnutrition and associated diseases is considered unlikely before 2000, as are advances in biomedical research. Changes in health services (e.g., significant increases in hospital beds and doctors, cheap bulk drugs), particularly in rural areas, are imminent, leading to prolonging of life expectancy to 70 years. Genetic engineering may provide significant breakthroughs in the prevention of malignancies and cardiac disorders. The India delphi study is patterned after a similar delphi study conducted in the U.S. by Smith, Kline and French (SKF) Laboratories in 1968. The SKF study was able to predict some breakthroughs with basic research which have been realized.

Challenges and breakthroughs in recent research on self-assembly

PubMed Central

Ariga, Katsuhiko; Hill, Jonathan P; Lee, Michael V; Vinu, Ajayan; Charvet, Richard; Acharya, Somobrata

2008-01-01

The controlled fabrication of nanometer-scale objects is without doubt one of the central issues in current science and technology. However, existing fabrication techniques suffer from several disadvantages including size-restrictions and a general paucity of applicable materials. Because of this, the development of alternative approaches based on supramolecular self-assembly processes is anticipated as a breakthrough methodology. This review article aims to comprehensively summarize the salient aspects of self-assembly through the introduction of the recent challenges and breakthroughs in three categories: (i) types of self-assembly in bulk media; (ii) types of components for self-assembly in bulk media; and (iii) self-assembly at interfaces. PMID:27877935

Technological Discontinuities and Dominant Designs: A Cyclical Model of Technological Change.

ERIC Educational Resources Information Center

Anderson, Philip; Tushman, Michael L.

1990-01-01

Based on longitudinal studies of the cement, glass, and minicomputer industries, this article proposes a technological change model in which a technological breakthrough, or discontinuity, initiates an era of intense technical variation and selection, culminating in a single dominant design and followed by a period of incremental technical…

Incidence and risk factors for epidural re-siting in parturients with breakthrough pain during labour epidural analgesia: a cohort study.

PubMed

Sng, B L; Tan, M; Yeoh, C J; Han, N-L R; Sultana, R; Assam, P N; Sia, A T

2018-05-01

Epidural re-siting is one of the significant events during labour epidural analgesia that may result in decreased patient satisfaction. The aim of our study was to investigate the incidence of and factors associated with epidural re-siting in parturients using epidural analgesia, with an emphasis on those with breakthrough pain. A retrospective cohort study of 10170 parturients who received labour epidural analgesia. The primary outcome was the incidence of epidural re-siting (binary data). Univariate and multivariate logistic regression analysis were performed to find associated risk factors for re-siting. Less than 1% (0.85%, 86/10170) of the women in the study had their epidural re-sited. Amongst the subset of women with breakthrough pain, the incidence of epidural re-siting was higher (4.7%, 68/1454). Most of the women who had their epidural re-sited had experienced breakthrough pain (79%, 68/86). Amongst all parturients, the presence of breakthrough pain (OR=21.31), hypotension (OR=4.18) and venous puncture (OR=2.74) were significantly associated with re-siting. Amongst the parturients with breakthrough pain who required epidural re-siting, lower cervical dilatation (OR=0.81), higher number of episodes of breakthrough pain (OR=1.83) and patchy block (OR=4.37) were significantly associated with re-siting. The areas-under-curves of two multivariate models were 0.894 and 0.806 respectively. In our institution, the incidence of epidural catheter re-siting was low in all patients. However, the majority of patients whose catheters were re-sited had exhibited breakthrough pain. The risk factors associated with the need for re-siting of catheters in all patients differed from those who had breakthrough pain. Copyright © 2017 Elsevier Ltd. All rights reserved.

Technology for Libraries.

ERIC Educational Resources Information Center

Phenix, Katharine; And Others

1990-01-01

Five articles discuss information technology in libraries: (1) "Software for Libraries" (Katharine Phenix); (2) "Online Update: European Online Services" (Martin Kesselman); (3) "Connect Time: Online Pricing Breakthroughs" (Barbara Quint); (4) "Microcomputing: Micro Biology Computer Viruses" (James LaRue);…

The New Three Rs: Research, Reading, and Results. Breakthrough to Literacy[TM].

ERIC Educational Resources Information Center

McGraw-Hill Companies, New York, NY. Educational and Professional Publishing Group.

Research in school districts throughout the United States shows that children who use "Breakthrough to Literacy" achieve significant and lasting improvement in their reading skills. At virtually every site studied where implementation criteria were met, children who participated in "Breakthrough" demonstrated marked increases…

Single-Cell Microgels: Technology, Challenges, and Applications.

PubMed

Kamperman, Tom; Karperien, Marcel; Le Gac, Séverine; Leijten, Jeroen

2018-04-12

Single-cell-laden microgels effectively act as the engineered counterpart of the smallest living building block of life: a cell within its pericellular matrix. Recent breakthroughs have enabled the encapsulation of single cells in sub-100-μm microgels to provide physiologically relevant microniches with minimal mass transport limitations and favorable pharmacokinetic properties. Single-cell-laden microgels offer additional unprecedented advantages, including facile manipulation, culture, and analysis of individual cell within 3D microenvironments. Therefore, single-cell microgel technology is expected to be instrumental in many life science applications, including pharmacological screenings, regenerative medicine, and fundamental biological research. In this review, we discuss the latest trends, technical challenges, and breakthroughs, and present our vision of the future of single-cell microgel technology and its applications. Copyright © 2018 Elsevier Ltd. All rights reserved.

Handbook of Research on Driving STEM Learning with Educational Technologies

ERIC Educational Resources Information Center

Ramírez-Montoya, María-Soledad, Ed.

2017-01-01

Educational strategies have evolved over the years, due to research breakthroughs and the application of technology. By using the latest learning innovations, curriculum and instructional design can be enhanced and strengthened. The "Handbook of Research on Driving STEM Learning with Educational Technologies" is an authoritative…

Patients with breakthrough reactions to iodinated contrast media have low incidence of positive skin tests.

PubMed

Berti, A; Della-Torre, E; Yacoub, Mr; Tombetti, E; Canti, V; Sabbadini, M G; Colombo, G

2016-07-01

The term "breakthrough reactions" designates repeated hypersensitivity reactions to iodinated contrast media (ICM) despite premedication with glucocorticoids and antihistamines. We aimed to retrospectively evaluate the rate of positive skin test (STs) in our cohort of patients with previous breakthrough reactions to different ICMs. A series of 35 patients, who experienced at least one breakthrough reaction to ICM and who underwent STs within 6 months from the reaction were studied, and results were compared to a control group of patients with a first hypersensitivity reaction occurred without premedication. Skin prick tests (SPT), intradermal tests (IDT) and patch tests (PT) at different dilutions, with a set of three to four ICM were performed. Of the 35 patients with prior breakthrough reactions, 57% had an immediate reaction (IR) and 43% had a non-immediate reaction (NIR). Patients who experienced the first hypersensitivity IR or NIR, later had one or more breakthrough IR or NIR, respectively. Overall, 29% (10/35) of patients with prior breakthrough reactions resulted positive to STs compared to 57% (16/28) of the control group (p < 0.05). No significant difference in allergy history, age, sex, other clinical / demographic features nor chronic use of ACE-inhibitor, beta-blockers or NSAIDs was observed. This preliminary finding suggests that patients with prior breakthrough reactions have significantly lower immunologically proven ICM reactions (positive STs) if compared to non-breakthrough patients. According to that, a considerable number of breakthrough reactions seems to be non-allergic hypersensitivity reactions or reactions which could be mostly prevented by a proper, well-timed skin testing. Larger prospective studies are needed to confirm these results, with a more careful analysis of patients' risk factors, a laboratory assessment that includes an in vitro allergy diagnostics, and hopefully a drug provocation test for selected cases.

Disparities Between Clinician and Patient Perception of Breakthrough Pain Control.

PubMed

Webber, Katherine; Davies, Andrew N; Cowie, Martin R

2016-05-01

There are disparities in the level of symptom severity as perceived by patients and health professionals. There is limited information about patients' and clinicians' global assessment of breakthrough pain control, the need to change analgesics, and change in breakthrough pain over time. To establish whether patients and clinicians independently agree on adequacy of breakthrough pain control, management strategy, and impression of change over time. One hundred patients with breakthrough cancer pain were assessed and followed up one week later by a palliative medicine specialist. The patient and clinician independently answered the same questions about the adequacy of the patient's breakthrough pain control and breakthrough pain management. The results were compared with items on the Breakthrough Pain Assessment Tool (BAT). At initial consultation, 35% of patients rated their breakthrough cancer pain as inadequately controlled compared with 72% of clinicians. Breakthrough pain analgesics were changed in 68% of cases. At one-week follow-up consultation, 62% of patients considered their breakthrough cancer pain to be better, and in 57% of cases, the clinicians also categorized the pain this way. There are significant differences in global impressions of breakthrough pain between patients and pain clinicians that become less disparate as a therapeutic relationship evolves. Therapeutic decisions were based on clinical rather than patient perceptions. Copyright © 2016 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Space Propulsion Synergy Group ETO technology assessments

NASA Astrophysics Data System (ADS)

Bray, James

There exists within the aerospace community a widely recognized need to improve future space launch systems. While these needs have been expressed by many national committees, potential solutions have not achieved consensus nor have they endured. Facing the challenge to remain competitive with limited national resources, the U.S. must improve its strategic planning efforts. A nationally accepted strategic plan for space would enable a focused research & development program. The Space Propulsion Synergy Group (SPSG), chartered to support long range strategic planning, has achieved several breakthroughs. First, using a broad industry/government team, the SPSG evaluated and achieved consensus on the vehicles, propulsion systems, and propulsion technologies that have the best long term potential for achieving desired system attributes. The breakthrough that enabled broad consensus was developing criteria that are measurable a-priori. Second, realizing that systems having the best long term payoffs can loose support when constraints are tight, the SPSG invented a dual prioritization approach that balances long term strategic thrusts with current programmatic constraints. This breakthrough enables individual program managers to make decisions based on both individual project needs and long term strategic needs. Results indicate that a SSTO using an integrated modular engine has the best long term potential for a 20 Klb class vehicle and that health monitoring and control technologies rank among the highest dual priority liquid rocket technologies.

Top Ten Technology Breakthroughs for Schools.

ERIC Educational Resources Information Center

Bateman, Bill; Crystal, Jerry; Davidson, Hall; Holzberg, Carol S.; McIntire, Todd; McLester, Susan; Ohler, Jason; Rose, Ray; Shields, Jean; Warlick, David

2001-01-01

Contributors discuss the top ten technologies that allow for thinking in new and innovative ways about the concept of "school": virtual learning; wireless networking; collaboration tools; digital video; Application Service Providers; handheld devices; optical networking; videoconferencing; XML; and simulations. (AEF)

The nearly universal link between the age of past knowledge and tomorrow’s breakthroughs in science and technology: The hotspot

PubMed Central

Mukherjee, Satyam; Romero, Daniel M.; Jones, Ben; Uzzi, Brian

2017-01-01

Scientists and inventors can draw on an ever-expanding literature for the building blocks of tomorrow’s ideas, yet little is known about how combinations of past work are related to future discoveries. Our analysis parameterizes the age distribution of a work’s references and revealed three links between the age of prior knowledge and hit papers and patents. First, works that cite literature with a low mean age and high age variance are in a citation “hotspot”; these works double their likelihood of being in the top 5% or better of citations. Second, the hotspot is nearly universal in all branches of science and technology and is increasingly predictive of a work’s future citation impact. Third, a scientist or inventor is significantly more likely to write a paper in the hotspot when they are coauthoring than whey they are working alone. Our findings are based on all 28,426,345 scientific papers in the Web of Science, 1945–2013, and all 5,382,833 U.S. patents, 1950–2010, and reveal new antecedents of high-impact science and the link between prior literature and tomorrow’s breakthrough ideas. PMID:28439537

The nearly universal link between the age of past knowledge and tomorrow's breakthroughs in science and technology: The hotspot.

PubMed

Mukherjee, Satyam; Romero, Daniel M; Jones, Ben; Uzzi, Brian

2017-04-01

Scientists and inventors can draw on an ever-expanding literature for the building blocks of tomorrow's ideas, yet little is known about how combinations of past work are related to future discoveries. Our analysis parameterizes the age distribution of a work's references and revealed three links between the age of prior knowledge and hit papers and patents. First, works that cite literature with a low mean age and high age variance are in a citation "hotspot"; these works double their likelihood of being in the top 5% or better of citations. Second, the hotspot is nearly universal in all branches of science and technology and is increasingly predictive of a work's future citation impact. Third, a scientist or inventor is significantly more likely to write a paper in the hotspot when they are coauthoring than whey they are working alone. Our findings are based on all 28,426,345 scientific papers in the Web of Science, 1945-2013, and all 5,382,833 U.S. patents, 1950-2010, and reveal new antecedents of high-impact science and the link between prior literature and tomorrow's breakthrough ideas.

Advanced Energetics for Aeronautical Applications. Volume II

NASA Technical Reports Server (NTRS)

Alexander, David S.

2005-01-01

NASA has identified water vapor emission into the upper atmosphere from commercial transport aircraft, particularly as it relates to the formation of persistent contrails, as a potential environmental problem. Since 1999, MSE has been working with NASA-LaRC to investigate the concept of a transport-size emissionless aircraft fueled with liquid hydrogen combined with other possible breakthrough technologies. The goal of the project is to significantly advance air transportation in the next decade and beyond. The power and propulsion (P/P) system currently being studied would be based on hydrogen fuel cells (HFCs) powering electric motors, which drive fans for propulsion. The liquid water reaction product is retained onboard the aircraft until a flight mission is completed. As of now, NASA-LaRC and MSE have identified P/P system components that, according to the high-level analysis conducted to date, are light enough to make the emissionless aircraft concept feasible. Calculated maximum aircraft ranges (within a maximum weight constraint) and other performance predictions are included in this report. This report also includes current information on advanced energy-related technologies, which are still being researched, as well as breakthrough physics concepts that may be applicable for advanced energetics and aerospace propulsion in the future.

Los Alamos Team Demonstrates Bottle Scanner Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Espy, Michelle; Schultz, Larry

2014-05-06

Los Alamos scientists are demonstrating a Nuclear Magnetic Resonance Imaging (NMR) technology that may provide a breakthrough for screening liquids at airport security. By adding low-power X-ray data to the NMR mix, scientists believe they have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new technology is called MagRay.

Los Alamos Team Demonstrates Bottle Scanner Technology

ScienceCinema

Espy, Michelle; Schultz, Larry

2018-02-13

Los Alamos scientists are demonstrating a Nuclear Magnetic Resonance Imaging (NMR) technology that may provide a breakthrough for screening liquids at airport security. By adding low-power X-ray data to the NMR mix, scientists believe they have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new technology is called MagRay.

NASA Space Engineering Research Center for VLSI System Design

NASA Technical Reports Server (NTRS)

1993-01-01

This annual report outlines the activities of the past year at the NASA SERC on VLSI Design. Highlights for this year include the following: a significant breakthrough was achieved in utilizing commercial IC foundries for producing flight electronics; the first two flight qualified chips were designed, fabricated, and tested and are now being delivered into NASA flight systems; and a new technology transfer mechanism has been established to transfer VLSI advances into NASA and commercial systems.

Delivery of Fluorescent Nanoparticles to the Brain.

PubMed

Shimoni, Olga; Shi, Bingyang; Adlard, Paul A; Bush, Ashley I

2016-11-01

Nanotechnology applications in neuroscience promises to deliver significant scientific and technological breakthroughs, providing answers to unresolved questions regarding the processes occurring in the brain. In this perspective, we provide a short background on two distinct fluorescent nanoparticles and summarize several studies focussed on achieving delivery of these into the brain and their interaction with brain tissue. Furthermore, we discuss challenges and opportunities for further development of nanoparticle-based therapies for targeting delivery of drugs across the blood-brain barrier.

Oil-Free Turbomachinery Being Developed

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher; Valco, Mark J.

2001-01-01

NASA and the Army Research Laboratory (ARL) along with industry and university researchers, are developing Oil-Free technology that will have a revolutionary impact on turbomachinery systems used in commercial and military applications. System studies have shown that eliminating an engine's oil system can yield significant savings in weight, maintenance, and operational costs. The Oil-Free technology (foil air bearings, high-temperature coatings, and advanced modeling) is being developed to eliminate the need for oil lubrication systems on high-speed turbomachinery such as turbochargers and gas turbine engines that are used in aircraft propulsion systems. The Oil-Free technology is enabled by recent breakthroughs in foil bearing load capacity, solid lubricant coatings, and computer-based analytical modeling. During the past fiscal year, a U.S. patent was awarded for the NASA PS300 solid lubricant coating, which was developed at the NASA Glenn Research Center. PS300 has enabled the successful operation of foil air bearings to temperatures over 650 C and has resulted in wear lives in excess of 100,000 start/stop cycles. This leapfrog improvement in performance over conventional solid lubricants (limited to 300 C) creates new application opportunities for high-speed, high-temperature Oil-Free gas turbine engines. On the basis of this break-through coating technology and the world's first successful demonstration of an Oil-Free turbocharger in fiscal year 1999, industry is partnering with NASA on a 3-year project to demonstrate a small, Oil-Free turbofan engine for aeropropulsion.

3 CFR 9032 - Proclamation 9032 of September 30, 2013. National Energy Action Month, 2013

Code of Federal Regulations, 2014 CFR

2014-01-01

... reduce carbon pollution, and we must build global markets for new advanced technologies. If we take these... must invest in the technologies of the future and fund breakthrough research to make these technologies... world in creating green jobs and technologies that are vital to both a clean energy future and the fight...

Imperatives of Information and Communication Technology (ICT) for Second Language Learners and Teachers

ERIC Educational Resources Information Center

Akinwamide, Timothy Kolade

2012-01-01

The introduction of information and communication technology (ICT) to education creates new learning paradigms. We are dwelling in a world which technology has reduced to a global village and the breakthrough in technology is underpinning pedagogical submissions. It may become imperative therefore to have a rethinking on how to ameliorate the…

Innovative Technologies for Human Exploration: Opportunities for Partnerships and Leveraging Novel Technologies External to NASA

NASA Technical Reports Server (NTRS)

Hay, Jason; Mullins, Carie; Graham, Rachael; Williams-Byrd, Julie; Reeves, John D.

2011-01-01

Human spaceflight organizations have ambitious goals for expanding human presence throughout the solar system. To meet these goals, spaceflight organizations have to overcome complex technical challenges for human missions to Mars, Near Earth Asteroids, and other distant celestial bodies. Resolving these challenges requires considerable resources and technological innovations, such as advancements in human health and countermeasures for space environments; self-sustaining habitats; advanced power and propulsion systems; and information technologies. Today, government space agencies seek cooperative endeavors to reduce cost burdens, improve human exploration capabilities, and foster knowledge sharing among human spaceflight organizations. This paper looks at potential opportunities for partnerships and spin-ins from economic sectors outside the space industry. It highlights innovative technologies and breakthrough concepts that could have significant impacts on space exploration and identifies organizations throughout the broader economy that specialize in these technologies.

New technology applied to well logging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stremel, K.

1984-11-01

Remote locations and increasingly complex geology require a higher level of sophistication in well-logging equipment and services. Applying technological advancements, well-logging contractors have developed a variety of new products and services designed to provide better quality data at reasonable prices. One of the most significant technological breakthroughs has been in satellite communications. Denver-based Western Tele-Communications Inc. is one of the few companies offering voice and data transmission services via satellite. Up to 9600 bits per second of realtime data is transmitted from terminals at remote wellsites through a main station in Denver to locations throughout the world. Because management inmore » separate offices can review well data simultaneously, critical operations decisions can be made more quickly.« less

Advanced Concepts: Enabling Future AF Missions Through the Discovery and Demonstration of Emerging Revolutionary Technologies

DTIC Science & Technology

2012-10-03

µmeteoroids, weather, vibrations... Asteroid Mining Breakthrough Physics No known feasible concepts. --- Concept NTF NMS NCA Primary Challenges for Launch...weather, vibrations... Asteroid Mining Breakthrough Physics No known feasible concepts. --- 8 2.2 Microwave Augmentation of Solid Rocket Motors16,17 As...Astronautica, Vol. 52, 1, pp. 49-75, 30 May, 2002. 7. Sonter, M.J., “The Technical and Economic Feasibility of Mining the Near-Earth Asteroids ,” Acta

CVX Damage Control Information Technology Evolutionary Model

DTIC Science & Technology

1999-03-01

technology -based learning generally) may be exciting technically, it does not automatically lead to better educational programs. Good instructional design...expected to act on the first Aircraft Carrier to attempt substantial manning reductions if nothing is learned from Smart Ship. Beyond the technologies ... technology of the day. Many of the lessons learned then are in use today. However, technology breakthroughs we are now experiencing invite us to

The Breakthrough Listen Search for Intelligent Life

NASA Astrophysics Data System (ADS)

Croft, Steve; Siemion, Andrew; De Boer, David; Enriquez, J. Emilio; Foster, Griffin; Gajjar, Vishal; Hellbourg, Greg; Hickish, Jack; Isaacson, Howard; Lebofsky, Matt; MacMahon, David; Price, Daniel; Werthimer, Dan

2018-01-01

The $100M, 10-year philanthropic "Breakthrough Listen" project is driving an unprecedented expansion of the search for intelligent life beyond Earth. Modern instruments allow ever larger regions of parameter space (luminosity function, duty cycle, beaming fraction, frequency coverage) to be explored, which is enabling us to place meaningful physical limits on the prevalence of transmitting civilizations. Data volumes are huge, and preclude long-term storage of the raw data products, so real-time and machine learning processing techniques must be employed to identify candidate signals as well as simultaneously classifying interfering sources. However, the Galaxy is now known to be a target-rich environment, teeming with habitable planets.Data from Breakthrough Listen can also be used by researchers in other areas of astronomy to study pulsars, fast radio bursts, and a range of other science targets. Breakthrough Listen is already underway in the optical and radio bands, and is also engaging with facilities across the world, including Square Kilometer Array precursors and pathfinders. I will give an overview of the technology, science goals, data products, and roadmap of Breakthrough Listen, as we attempt to answer one of humanity's oldest questions: Are we alone?

Technology and the Future of Healthcare

PubMed Central

Thimbleby, Harold

2013-01-01

Healthcare changes dramatically because of technological developments, from anesthetics and antibiotics to magnetic resonance imaging scanners and radiotherapy. Future technological innovation is going to keep transforming healthcare, yet while technologies (new drugs and treatments, new devices, new social media support for healthcare, etc) will drive innovation, human factors will remain one of the stable limitations of breakthroughs. No predictions can satisfy everybody; instead, this article explores fragments of the future to see how to think more clearly about how to get where we want to go. Significance for public health Technology drives healthcare more than any other force, and in the future it will continue to develop in dramatic ways. While we can glimpse and debate the details of future trends in healthcare, we need to be clear about the drivers so we can align with them and actively work to ensure the best outcomes for society as a whole. PMID:25170499

SMD Technology Development Story for NASA Annual Technology report

NASA Technical Reports Server (NTRS)

Seablom, Michael S.

2017-01-01

The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the Nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by Agency goals, input from the science community-including the recommendations set forth in the National Research Council (NRC) decadal surveys-and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions-Heliophysics, Earth Science, Planetary Science, and Astrophysics-develops fundamental science questions upon which to base future research and mission programs. Often the breakthrough science required to answer these questions requires significant technological innovation-e.g., instruments or platforms with capabilities beyond the current state of the art. SMD's targeted technology investments fill technology gaps, enabling NASA to build the challenging and complex missions that accomplish groundbreaking science.

Breakthroughs in photonics 2013: X-ray optics

DOE PAGES

Soufli, Regina

2014-04-01

Here, this review discusses the latest advances in extreme ultraviolet/X-ray optics development, which are motivated by the availability and demands of new X-ray sources and scientific and industrial applications. Among the breakthroughs highlighted are the following: i) fabrication, metrology, and mounting technologies for large-area optical substrates with improved figure, roughness, and focusing properties; ii) multilayer coatings with especially optimized layer properties, achieving improved reflectance, stability, and out-of-band suppression; and iii) nanodiffractive optics with improved efficiency and resolution.

High throughput ion-channel pharmacology: planar-array-based voltage clamp.

PubMed

Kiss, Laszlo; Bennett, Paul B; Uebele, Victor N; Koblan, Kenneth S; Kane, Stefanie A; Neagle, Brad; Schroeder, Kirk

2003-02-01

Technological advances often drive major breakthroughs in biology. Examples include PCR, automated DNA sequencing, confocal/single photon microscopy, AFM, and voltage/patch-clamp methods. The patch-clamp method, first described nearly 30 years ago, was a major technical achievement that permitted voltage-clamp analysis (membrane potential control) of ion channels in most cells and revealed a role for channels in unimagined areas. Because of the high information content, voltage clamp is the best way to study ion-channel function; however, throughput is too low for drug screening. Here we describe a novel breakthrough planar-array-based HT patch-clamp technology developed by Essen Instruments capable of voltage-clamping thousands of cells per day. This technology provides greater than two orders of magnitude increase in throughput compared with the traditional voltage-clamp techniques. We have applied this method to study the hERG K(+) channel and to determine the pharmacological profile of QT prolonging drugs.

Epicardial mapping of ventricular fibrillation over the posterior descending artery and left posterior papillary muscle of the swine heart.

PubMed

Nielsen, Thomas D; Huang, Jian; Rogers, Jack M; Killingsworth, Cheryl R; Ideker, Raymond E

2009-01-01

Recent studies suggest that during ventricular fibrillation (VF) epicardial vessels may be a site of conduction block and the posterior papillary muscle (PPM) in the left ventricle (LV) may be the location of a "mother rotor." The goal of this study was to obtain evidence to support or refute these possibilities. Epicardial activation over the posterior LV and right ventricle (RV) was mapped during the first 20 s of electrically induced VF in six open-chest pigs with a 504 electrode plaque covering a 20 cm(2) area centered over the posterior descending artery (PDA). The locations of epicardial breakthrough as well as reentry clustered in time and space during VF. Spatially, reentry occurred significantly more frequently over the LV than the RV in all 48 episodes, and breakthrough clustered near the PPM (p < 0.001). Significant temporal clustering occurred in 79% of breakthrough episodes and 100% of reentry episodes. These temporal clusters occurred at different times so that there was significantly less breakthrough when reentry was present (p < 0.0001). Conduction block occurred significantly more frequently near the PDA than elsewhere. The PDA is a site of epicardial block which may contribute to VF maintenance. Epicardial breakthrough clusters near the PPM. Reentry also clusters in space but at a separate site. The fact that breakthrough and reentry cluster at different locations and at different times supports the possibility of a drifting filament at the PPM so that at times reentry is present on the surface but at other times the reentrant wavefront breaks through to the epicardium.

Proposed Social Spending Innovation Research (SSIR) Program: Harnessing American Entrepreneurial Talent to Solve Major U.S. Social Problems

ERIC Educational Resources Information Center

Coalition for Evidence-Based Policy, 2015

2015-01-01

The Social Spending Innovation Research (SSIR) proposal seeks to replicate, in social spending, the great success of the Small Business Innovation Research (SBIR) program in technology development. The SBIR program funds technology development by entrepreneurial small companies. The program has spawned breakthrough technologies in diverse areas…

Pedagogical Applications of Instant Messaging Technology for Deaf and Hard-of-Hearing Students in the Science Classroom

ERIC Educational Resources Information Center

Pagano, Todd; Quinsland, L. K.

2007-01-01

For deaf and hard-of-hearing individuals, the emergence of Instant Messaging technology and digital pagers has been perhaps one of the greatest liberating communication technological breakthroughs since the advent of the TTY. Instant Messaging has evolved into an everyday socially compelling, portable, and "real time" communication mode…

RAS Initiative - Events

Cancer.gov

The NCI RAS Initiative has organized multiple events with outside experts to discuss how the latest scientific and technological breakthroughs can be applied to discover vulnerabilities in RAS-driven cancers.

Creating the Future: Research and Technology

NASA Technical Reports Server (NTRS)

1998-01-01

With the many different technical talents, Marshall Space Flight Center (MSFC) continues to be an important force behind many scientific breakthroughs. The MSFC's annual report reviews the technology developments, research in space and microgravity sciences, studies in space system concepts, and technology transfer. The technology development programs include development in: (1) space propulsion and fluid management, (2) structures and dynamics, (3) materials and processes and (4) avionics and optics.

The Man computer Interactive Data Access System: 25 Years of Interactive Processing.

NASA Astrophysics Data System (ADS)

Lazzara, Matthew A.; Benson, John M.; Fox, Robert J.; Laitsch, Denise J.; Rueden, Joseph P.; Santek, David A.; Wade, Delores M.; Whittaker, Thomas M.; Young, J. T.

1999-02-01

On 12 October 1998, it was the 25th anniversary of the Man computer Interactive Data Access System (McIDAS). On that date in 1973, McIDAS was first used operationally by scientists as a tool for data analysis. Over the last 25 years, McIDAS has undergone numerous architectural changes in an effort to keep pace with changing technology. In its early years, significant technological breakthroughs were required to achieve the functionality needed by atmospheric scientists. Today McIDAS is challenged by new Internet-based approaches to data access and data display. The history and impact of McIDAS, along with some of the lessons learned, are presented here

Arch Venture Partners' investment considerations for CBRNE products and opportunities

NASA Astrophysics Data System (ADS)

Crandell, K.; Lazarus, S.; Gardner, P. J.

2008-04-01

ARCH is interested in building leading, highly-valued companies from leading research. Toward that end we value innovations created by the leading researchers in the world, many of which are funded to solve critical scientific challenges including those in the instrumentation and CBRNE area. The most important CBRNE innovations we have seen at ARCH are breakthroughs involving significant unaddressed technology risk and have the potential for broad proprietary intellectual property as a result. The model ARCH has evolved in instrumentation is to look for a breakthrough innovation, with strong intellectual property and continue to strengthen the patent estate through the life of the company. ARCH looks to build companies around leading interdisciplinary scientific and engineering teams, and we favor platform technology that can be applied to multiple market applications both commercial and government. As part of a strategy to build a great company, addressing important CBRNE challenges can help a company strengthen its technical team and its IP estate. This supports a focus on early low volume markets on the way toward addressing a fuller portfolio of applications. Experienced Venture Capitalists can help this process by identifying important executive talent, partners and applications, offering financial syndication strength, and helping shape the company's strategy to maximize the ultimate value realized.

Buildings R&D Breakthroughs: Technologies and Products Supported by the Building Technologies Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weakley, Steven A.

2012-04-01

The purpose of the project described in this report is to identify and characterize commercially available products and emerging (near-commercial) technologies that benefited from the support of the Building Technologies Program (BTP) within the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy. The investigation specifically focused on technology-oriented research and development (R&D) projects funded by BTP’s Emerging Technologies subprogram from 2005-2011.

Connecting Depth and Balance in Class

ERIC Educational Resources Information Center

Kuhn, Matthew S.

2008-01-01

Tremendous growth in educational technology tools, applications, and Web 2.0 resources have created a plethora of new methods to meet the learning needs of all students. Unfortunately, the potential of these methods is hardly understood before a new technological breakthrough makes its way into the classroom, through either teachers or, more…

Schooling Rebooted

ERIC Educational Resources Information Center

Hess, Frederick M.; Saxberg, Bror

2014-01-01

Today's education technology holds immense promise, but what matters more than the tools themselves are how they are used in schools and in classrooms. In "Breakthrough Leadership in the Digital Age," Frederick M. Hess and Bror Saxberg argue that educators have tended to think of adopting technology as a way to "reform" or…

New Emerging Careers: Today, Tomorrow and in the 21st Century.

ERIC Educational Resources Information Center

Feingold, S. Norman; Atwater, Maxine H.

This book focuses on 10 of the most promising new technologies and the careers that they will foster, picking up where the 1983 book, "Emerging Careers" by Norman Feingold, left off. The book talks about the work that must be done in new ways as technological breakthroughs open new applications. By looking first at the technologies and their…

Research and Development Trend of Shape Control for Cold Rolling Strip

NASA Astrophysics Data System (ADS)

Wang, Dong-Cheng; Liu, Hong-Min; Liu, Jun

2017-09-01

Shape is an important quality index of cold rolling strip. Up to now, many problems in the shape control domain have not been solved satisfactorily, and a review on the research progress in the shape control domain can help to seek new breakthrough directions. In the past 10 years, researches and applications of shape control models, shape control means, shape detection technology, and shape control system have achieved significant progress. In the aspect of shape control models, the researches in the past improve the accuracy, speed and robustness of the models. The intelligentization of shape control models should be strengthened in the future. In the aspect of the shape control means, the researches in the past focus on the roll optimization, mill type selection, process optimization, local strip shape control, edge drop control, and so on. In the future, more attention should be paid to the coordination control of both strip shape and other quality indexes, and the refinement of control objective should be strengthened. In the aspects of shape detection technology and shape control system, some new types of shape detection meters and shape control systems are developed and have successfully industrial applications. In the future, the standardization of shape detection technology and shape control system should be promoted to solve the problem of compatibility. In general, the four expected development trends of shape control for cold rolling strip in the future are intelligentization, coordination, refinement, and standardization. The proposed research provides new breakthrough directions for improving shape quality.

Horizon Missions Methodology - Using new paradigms to overcome conceptual blocks to innovation

NASA Technical Reports Server (NTRS)

Anderson, John L.

1993-01-01

The Horizon Mission Methodology was developed to provide a systematic analytical approach for evaluating and identifying technological requirements for breakthrough technology options (BTOs) and for assessing their potential to provide revolutionary capabilities for advanced space missions. Here, attention is given to the further use of the methodology as a new tool for a broader range of studies dealing with technology innovation and new technology paradigms.

Epicardial mapping of ventricular fibrillation over the posterior descending artery and left posterior papillary muscle of the swine heart

PubMed Central

Nielsen, Thomas D.; Huang, Jian; Rogers, Jack M.; Killingsworth, Cheryl R.

2008-01-01

Background Recent studies suggest that during ventricular fibrillation (VF) epicardial vessels may be a site of conduction block and the posterior papillary muscle (PPM) in the left ventricle (LV) may be the location of a “mother rotor.” The goal of this study was to obtain evidence to support or refute these possibilities. Methods Epicardial activation over the posterior LV and right ventricle (RV) was mapped during the first 20 s of electrically induced VF in six open-chest pigs with a 504 electrode plaque covering a 20 cm2 area centered over the posterior descending artery (PDA). Results The locations of epicardial breakthrough as well as reentry clustered in time and space during VF. Spatially, reentry occurred significantly more frequently over the LV than the RV in all 48 episodes, and breakthrough clustered near the PPM (p<0.001). Significant temporal clustering occurred in 79% of breakthrough episodes and 100% of reentry episodes. These temporal clusters occurred at different times so that there was significantly less breakthrough when reentry was present (p<0.0001). Conduction block occurred significantly more frequently near the PDA than elsewhere. Conclusions The PDA is a site of epicardial block which may contribute to VF maintenance. Epicardial breakthrough clusters near the PPM. Reentry also clusters in space but at a separate site. The fact that breakthrough and reentry cluster at different locations and at different times supports the possibility of a drifting filament at the PPM so that at times reentry is present on the surface but at other times the reentrant wavefront breaks through to the epicardium. PMID:18839296

Progress Towards Environmentally Friendlier Automobiles

NASA Astrophysics Data System (ADS)

Culver, Robert

2002-03-01

The United States Council for Automotive Research (USCAR), the umbrella organization of DaimlerChrysler, Ford, and General Motors, has been conducting pre-competitive research in the areas of improving fuel efficiency and reducing tailpipe emissions. One of the major collaborations is with the U.S. Government in the Partnership for a New Generation of Vehicles (PNGV). The USCAR/PNGV technology portfolio includes lightweight materials, improved conventional internal combustion engine systems, electric traction and hybridization, and fuel cells. Significant progress has been made in developing these technologies and marketing them through today’s vehicles. New product announcements of hybrids demonstrate the commitment of the industry to bring the new technologies to market. Yet, breakthroughs and innovations will be required before many of the technologies can fully realize their promise. In addition, government policies and programs will be required to promote market acceptance and ensure an infrastructure to provide new fuels.

2015 Science Mission Directorate Technology Highlights

NASA Technical Reports Server (NTRS)

Seablom, Michael S.

2016-01-01

The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the Nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by Agency goals, input from the science community including the recommendations set forth in the National Research Council (NRC) decadal surveys and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions -- Heliophysics, Earth Science, Planetary Science, and Astrophysics -- develops fundamental science questions upon which to base future research and mission programs. Often the breakthrough science required to answer these questions requires significant technological innovation, e.g., instruments or platforms with capabilities beyond the current state of the art. SMD's targeted technology investments fill technology gaps, enabling NASA to build the challenging and complex missions that accomplish groundbreaking science.

Proceedings: pellet fuels conference

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1995-12-31

The conference brought together professionals from the process- engineered-fuels (PEF), utility, paper, plastics, and boiler industries. Although the last two decades have produced technical breakthroughs, efforts to advance PEF must now focus on increasing commercial breakthroughs. Successful commercialization will depend on increasing supplier, consumer, and regulator confidence and support by demonstrating the performance and value of PEF products. Speakers provided updates on how PEF technology is evolving with respect to technical, economic, and regulatory challenges. Actions critical toward full commercialization of PEF were then considered. Discussion groups addressed materials sourcing, fuel processing and transportation, combustion, and ash handling.

FOREWORD: Focus on nanobiomaterials and technologies for breakthrough in future medicine Focus on nanobiomaterials and technologies for breakthrough in future medicine

NASA Astrophysics Data System (ADS)

Miyahara, Yuji; Kobayashi, Hisatoshi; Chen, Guoping; Kikuchi, Masanori

2010-02-01

In biomedical fields, various materials are used for different purposes such as therapy, diagnostics and drugs. Some of them come into direct contact with blood and tissues in the human body, while many others are used in advanced medical equipment. Without these materials, current advances in medicine would never be achieved. Even in the 21st century, we still face the challenge of incurable or intractable diseases such as cancer, as well as the emergence of new infectious diseases. Global action is necessary to deal with these issues. Recent developments in nanoscience and nanotechnology have provided new strategies for material design that are based on the structural control of atoms and molecules. These strategies have revolutionized the field of advanced functional materials. Their combination with the enormous amount of knowledge in molecular and cellular biology accumulated over the last few decades has lead to the conception of new medical technologies. These technologies are represented in cell therapy, drug targeting and regenerative medicine, and are being widely and intensively investigated for realization at an industrial scale. In order to find solutions to remaining issues in life science, it is necessary to accelerate the fusion between nano- and biotechnologies and to promote research and development in these interdisciplinary fields. In this context, National Institute for Materials Science (NIMS)—one of the leading research institutes in the field of materials science—held a series of symposia in the week of 21-24 July 2009, 'NIMS Week 2009' and 'Nanobio-materials and technologies: breakthrough for future medicine', that aimed to present advances in medical fields from the perspective of materials science and technologies. During NIMS Week, various activities were carried out, including perspective reviews and invited lectures by international leading researchers in the 'nanobio' field, in addition to four organized sessions and related satellite symposia. Professor Kazunori Kataoka of the University of Tokyo received the NIMS Award 2009 for his outstanding research achievements and contributions to developing functional nanodevices for drug and gene delivery. This focus issue includes his review article 'Multifunctional nanoassemblies of block copolymers for future cancer therapy'. Eleven other plenary and invited speakers from NIMS Week 2009 have contributed review articles that may have great impact on research and development in nanobiomaterials and technologies Research in the nanobio field requires multi-disciplinary collaboration between specialists in biology, medicine, chemistry, physics, electronics, material engineering and other areas. We believe that this focus issue contains useful information for these researchers and provides an outline of breakthroughs for future medicine.

77 FR 23373 - Small Business Investment Companies-Energy Saving Qualified Investments

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-19

... Debenture usage, number of Small Businesses financed, resulting breakthroughs in technology, comparative studies quantifying energy savings, and performance of Small Businesses financed. While SBA is concerned...

The New Millenium Program: Serving Earth and Space Sciences

NASA Technical Reports Server (NTRS)

Li, Fuk K.

2000-01-01

NASA has exciting plans for space science and Earth observations during the next decade. A broad range of advanced spacecraft and measurement technologies will be needed to support these plans within the existing budget and schedule constraints. Many of these technology needs are common to both NASA's Office of Earth Science (OES) and Office of Space Sciences (OSS). Even though some breakthrough technologies have been identified to address these needs, project managers have traditionally been reluctant to incorporate them into flight programs because their inherent development risk. To accelerate the infusion of new technologies into its OES and OSS missions, NASA established the New Millennium Program (NMP). This program analyzes the capability needs of these enterprises, identifies candidate technologies to address these needs, incorporates advanced technology suites into validation flights, validates them in the relevant space environment, and then proactively infuses the validated technologies into future missions to enhance their capabilities while reducing their life cycle cost. The NMP employs a cross-enterprise Science Working Group, the NASA Enterprise science and technology roadmaps to define the capabilities needed by future Earth and Space science missions. Additional input from the science community is gathered through open workshops and peer-reviewed NASA Research Announcement (NRAs) for advanced measurement concepts. Technology development inputs from the technology organizations within NASA, other government agencies, federally funded research and development centers (FFRDC's), U.S. industry, and academia are sought to identify breakthrough technologies that might address these needs. This approach significantly extends NASA's technology infrastructure. To complement other flight test programs that develop or validate of individual components, the NMP places its highest priority on system-level validations of technology suites in the relevant space environment. This approach is not needed for all technologies, but it is usually essential to validate advanced system architectures or new measurement concepts. The NMP has recently revised its processes for defining candidate validation flights, and selecting technologies for these flights. The NMP now employs integrated project formulation teams, 'Which include scientists, technologists, and mission planners, to incorporate technology suites into candidate validation flights. These teams develop competing concepts, which can be rigorously evaluated prior to selection for flight. The technology providers for each concept are selected through an open, competitive, process during the project formulation phase. If their concept is selected for flight, they are incorporated into the Project Implementation Team, which develops, integrates, tests, launches, and operates the technology validation flight. Throughout the project implementation phase, the Implementation Team will document and disseminate their validation results to facilitate the infusion of their validated technologies into future OSS and OES science missions. The NMP has successfully launched its first two Deep Space flights for the OSS, and is currently implementing its first two Earth Orbiting flights for the OES. The next OSS and OES flights are currently being defined. Even though these flights are focused on specific Space Science and Earth Science themes, they are designed to validate a range of technologies that could benefit both enterprises, including advanced propulsion, communications, autonomous operations and navigation, multifunctional structures, microelectronics, and advanced instruments. Specific examples of these technologies will be provided in our presentation. The processes developed by the NMP also provide benefits across the Space and Earth Science enterprises. In particular, the extensive, nation-wide technology infrastructure developed by the NMP enhances the access to breakthrough technologies for both enterprises.

Accomplishments of Long-Term Research and Development

DOE R&D Accomplishments Database

Jordy, George Y.

1988-07-01

Technological breakthroughs cannot be penciled on the calendar in advance. The rate of new technological discovery, while highly uncertain, depends on a base of knowledge acquired earlier. In the economic environment of 1980, progress in basic research, which builds the technology base that will underpin future energy development by Government and industry, was being slowed as cost increases due to inflation grew faster than funding increase.

CRISPR and piRNAs: Fundamental Mechanisms and Key Applications of the Next Generation of Molecular Technologies in the Field of Toxicology

EPA Science Inventory

" Exploration into the roles of genes, the proteins that they encode, and the functions that they carry out within the cell is a founding pillar in the field of toxicology. Recent breakthroughs in clustered, regularly interspaced, short palindromic repeat (CRISPR) technology...

The State of Simulations: Soft-Skill Simulations Emerge as a Powerful New Form of E-Learning.

ERIC Educational Resources Information Center

Aldrich, Clark

2001-01-01

Presents responses of leaders from six simulation companies about challenges and opportunities of soft-skills simulations in e-learning. Discussion includes: evaluation metrics; role of subject matter experts in developing simulations; video versus computer graphics; technology needed to run simulations; technology breakthroughs; pricing;…

Multiplexed lateral flow biosensors: Technological advances for radically improving point-of-care diagnoses.

PubMed

Li, Jia; Macdonald, Joanne

2016-09-15

Lateral flow biosensors are a leading technology in point-of-care diagnostics due to their simplicity, rapidness and low cost. Their primacy in this arena continues through technological breakthroughs such as multiplexing: the detection of more than one biomarker in a single assay. Multiplexing capacity is critical for improving diagnostic efficiency, enhancing the diagnostic precision for specific diseases and reducing diagnostic cost. Here we review, for the first time, the various types and strategies employed for creating multiplexed lateral flow biosensors. These are classified into four main categories in terms of specific application or multiplexing level, namely linear, parameter, spatial and conceptual. We describe the practical applications and implications for each approach and compare their advantages and disadvantages. Importantly, multiplexing is still subject to limitations of the traditional lateral flow biosensor, such as sensitivity and specificity. However, by pushing the limitations of the traditional medium into the multiplex arena, several technological breakthroughs are emerging with novel solutions that further expand the utility of lateral flow biosensing for point-of-care applications. Copyright © 2016 Elsevier B.V. All rights reserved.

Prime-Color Concept: Lighting for the Future

ERIC Educational Resources Information Center

Modern Schools, 1976

1976-01-01

A major technological breakthrough--the isolation and then combination of narrow bands of blue-violet, pure green, and orange-red energy--has resulted in a highly efficient white fluorescent lamp. (Author/MLF)

Boosting Manufacturing through Modular Chemical Process Intensification

ScienceCinema

None

2018-06-12

Manufacturing USA's Rapid Advancement in Process Intensification Deployment Institute will focus on developing breakthrough technologies to boost domestic energy productivity and energy efficiency by 20 percent in five years through manufacturing processes.

Boosting Manufacturing through Modular Chemical Process Intensification

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-12-09

Manufacturing USA's Rapid Advancement in Process Intensification Deployment Institute will focus on developing breakthrough technologies to boost domestic energy productivity and energy efficiency by 20 percent in five years through manufacturing processes.

Planning for economic and environmental resilience

DOT National Transportation Integrated Search

2010-10-01

economy, including the transportation sector. Slowing growth in vehicle miles traveled : (VMT) will be necessary for reducing transportation GHG emissions, even with major : breakthroughs in vehicle technologies and low-carbon fuels (Winkelman et al....

Turning Regenerative Medicine Breakthrough Ideas and Innovations into Commercial Products.

PubMed

Bayon, Yves; Vertès, Alain A; Ronfard, Vincent; Culme-Seymour, Emily; Mason, Chris; Stroemer, Paul; Najimi, Mustapha; Sokal, Etienne; Wilson, Clayton; Barone, Joe; Aras, Rahul; Chiesi, Andrea

2015-12-01

The TERMIS-Europe (EU) Industry committee intended to address the two main critical issues in the clinical/commercial translation of Advanced Therapeutic Medicine Products (ATMP): (1) entrepreneurial exploitation of breakthrough ideas and innovations, and (2) regulatory market approval. Since January 2012, more than 12,000 publications related to regenerative medicine and tissue engineering have been accepted for publications, reflecting the intense academic research activity in this field. The TERMIS-EU 2014 Industry Symposium provided a reflection on the management of innovation and technological breakthroughs in biotechnology first proposed to contextualize the key development milestones and constraints of allocation of financial resources, in the development life-cycle of radical innovation projects. This was illustrated with the biofuels story, sharing similarities with regenerative medicine. The transition was then ensured by an overview of the key identified challenges facing the commercialization of cell therapy products as ATMP examples. Real cases and testimonies were then provided by a palette of medical technologies and regenerative medicine companies from their commercial development of cell and gene therapy products. Although the commercial development of ATMP is still at the proof-of-concept stage due to technology risks, changing policies, changing markets, and management changes, the sector is highly dynamic with a number of explored therapeutic approaches, developed by using a large diversity of business models, both proposed by the experience, pitfalls, and successes of regenerative medicine pioneers, and adapted to the constraint resource allocation and environment in radical innovation projects.

FY08 Engineering Research and Technology Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Minichino, C; McNichols, D

2009-02-24

This report summarizes the core research, development, and technology accomplishments in Lawrence Livermore National Laboratory's Engineering Directorate for FY2008. These efforts exemplify Engineering's more than 50-year history of developing and applying the technologies needed to support the Laboratory's national security missions. A partner in every major program and project at the Laboratory throughout its existence, Engineering has prepared for this role with a skilled workforce and technical resources developed through both internal and external venues. These accomplishments embody Engineering's mission: 'Enable program success today and ensure the Laboratory's vitality tomorrow.' Engineering's mission is carried out through basic research and technologymore » development. Research is the vehicle for creating competencies that are cutting-edge, or require discovery-class groundwork to be fully understood. Our technology efforts are discipline-oriented, preparing research breakthroughs for broader application to a variety of Laboratory needs. The term commonly used for technology-based projects is 'reduction to practice.' As we pursue this two-pronged approach, an enormous range of technological capabilities result. This report combines our work in research and technology into one volume, organized into thematic technical areas: Engineering Modeling and Simulation; Measurement Technologies; Micro/Nano-Devices and Structures; Engineering Systems for Knowledge and Inference; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.« less

Cancer Pain Management Education Rectifies Patients' Misconceptions of Cancer Pain, Reduces Pain, and Improves Quality of Life.

PubMed

Koh, Su-Jin; Keam, Bhumsuk; Hyun, Min Kyung; Ju Seo, Jeong; Uk Park, Keon; Oh, Sung Yong; Ahn, Jinseok; Lee, Ja Youn; Kim, JinShil

2018-03-26

More than half of the patients have reported improper management of breakthrough cancer pain. Empirical evidence is lacking concerning the effectiveness of cancer pain education on breakthrough pain control. This study aimed to examine the effects of individual pain education on pain control, use of short-acting analgesics for breakthrough pain, quality of life outcomes, and rectification of patients' misconceptions regarding cancer pain. A quasi-experimental design was used. In total, 176 (102 inpatients and 74 outpatients) and 163 (93 inpatients and 70 outpatients) cancer patients completed questionnaires on pain intensity, quality of life, use of short-acting medication for breakthrough pain, and misconceptions about cancer pain and opioid use before and immediately and/or seven days after individual pain education. The mean age of the participants was 60.9 years (±11.2), and 56.3% were male. The most common cancers were lung cancer (17.0%), colon cancer (15.9%), and breast cancer (12.5%). The subjects' reasons for attrition were conditional deterioration, death, or voluntary withdrawal (N = 13, 7.4%). Following the education, there was a significant reduction in overall pain intensity over 24 hours (P < 0.001). The outpatients showed more use of short-acting analgesics for breakthrough pain. Sleep quality change was most significantly associated with intervention; other quality of life aspects (e.g., general feelings and life enjoyment) also improved. Pain education also significantly reduced misconceptions regarding cancer pain management. The present educational intervention was effective in encouraging short-acting analgesic use for breakthrough pain, improving quality of life outcomes, and rectifying patients' misconceptions about analgesic use.

From the Islands of Knowledge to a Shared Understanding: Interdisciplinarity and Technology Literacy for Innovation in Smart Electronic Product Design

ERIC Educational Resources Information Center

Blanco, Teresa; Casas, Roberto; Manchado-Pérez, Eduardo; Asensio, Ángel; López-Pérez, Jose M.

2017-01-01

In the context of the evolving Internet, a balance between technological advances and meaning change is crucial to develop innovative and breakthrough "connected electronics" that enable the Internet of Things. Designers and technologists are key enablers of this process respectively, ensuring adequate users' needs and technology…

Bioanalytical devices: Technological leap for sweat sensing

NASA Astrophysics Data System (ADS)

Heikenfeld, Jason

2016-01-01

Sweat analysis is an ideal method for continuously tracking a person's physiological state, but developing devices for this is difficult. A wearable sweat monitor that measures several biomarkers is a breakthrough. See Letter p.509

Heat Transfer and Fluid Transport of Supercritical CO 2 in Enhanced Geothermal System with Local Thermal Non-equilibrium Model

DOE PAGES

Zhang, Le; Luo, Feng; Xu, Ruina; ...

2014-12-31

The heat transfer and fluid transport of supercritical CO 2 in enhanced geothermal system (EGS) is studied numerically with local thermal non-equilibrium model, which accounts for the temperature difference between solid matrix and fluid components in porous media and uses two energy equations to describe heat transfer in the solid matrix and in the fluid, respectively. As compared with the previous results of our research group, the effect of local thermal non-equilibrium mainly depends on the volumetric heat transfer coefficient ah, which has a significant effect on the production temperature at reservoir outlet and thermal breakthrough time. The uniformity ofmore » volumetric heat transfer coefficient ah has little influence on the thermal breakthrough time, but the temperature difference become more obvious with time after thermal breakthrough with this simulation model. The thermal breakthrough time reduces and the effect of local thermal non-equilibrium becomes significant with decreasing ah.« less

First Breakthrough for Future Air-Breathing Magneto-Plasma Propulsion Systems

NASA Astrophysics Data System (ADS)

Göksel, B.; Mashek, I. Ch

2017-04-01

A new breakthrough in jet propulsion technology since the invention of the jet engine is achieved. The first critical tests for future air-breathing magneto-plasma propulsion systems have been successfully completed. In this regard, it is also the first time that a pinching dense plasma focus discharge could be ignited at one atmosphere and driven in pulse mode using very fast, nanosecond electrostatic excitations to induce self-organized plasma channels for ignition of the propulsive main discharge. Depending on the capacitor voltage (200-600 V) the energy input at one atmosphere varies from 52-320 J/pulse corresponding to impulse bits from 1.2-8.0 mNs. Such a new pulsed plasma propulsion system driven with one thousand pulses per second would already have thrust-to-area ratios (50-150 kN/m²) of modern jet engines. An array of thrusters could enable future aircrafts and airships to start from ground and reach altitudes up to 50km and beyond. The needed high power could be provided by future compact plasma fusion reactors already in development by aerospace companies. The magneto-plasma compressor itself was originally developed by Russian scientists as plasma fusion device and was later miniaturized for supersonic flow control applications. So the first breakthrough is based on a spin-off plasma fusion technology.

Precise Clinical Imaging of Tumors | Center for Cancer Research

Cancer.gov

Precisely locating and killing tumors in the body without harming surrounding cells is a major challenge in cancer treatment. CCR researchers have helped design breakthrough imaging technologies to better understand where and how tumors grow.

3 CFR 8675 - Proclamation 8675 of May 13, 2011. National Defense Transportation Day and National...

Code of Federal Regulations, 2012 CFR

2012-01-01

... ourselves for the next revolutionary breakthroughs in transportation technology. We must provide increased... world-class logistics network, create new jobs, and win the future for our children. In recognition of...

Building a Future for Technological Innovation

DTIC Science & Technology

2010-08-17

breakthroughs in health IT • Address scientific “grand challenges” Promote Competitive Markets that Spur Productive Entrepreneurship • Promote... entrepreneurship • Improve public sector innovation and support community innovation Source: http://www.whitehouse.gov/administration/eop/nec/reports

Innovative Catalytic Converter Wins National Award

Science.gov Websites

emissions and urban air pollution has been named one of the years most important technological breakthroughs improve urban air quality. The 1996 R&D 100 award winners will be featured in the September issue of

MPT_DOE Final Report 12-15-16 rev1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bunce, Michael

The goal of this project was to achieve breakthrough thermal efficiency on a light duty passenger car engine, with minimal impact to emissions. The enabling technology or technologies were to be relatively low cost and integrateable into existing production processes. Through the use of Turbulent Jet Ignition (TJI), an enabling technology for ultra-lean engine operation, the project team was able to meet or exceed all technical goals of this program.

Detection of hidden explosives in different scenarios with the use of nuclear probes

NASA Astrophysics Data System (ADS)

Nebbia, G.; Pesente, S.; Lunardon, M.; Moretto, S.; Viesti, G.; Cinausero, M.; Barbui, M.; Fioretto, E.; Filippini, V.; Sudac, D.; Nađ, K.; Blagus, S.; Valković, V.

2005-04-01

The detection of landmines by using available technologies is a time consuming, expensive and extremely dangerous job, so that there is a need for a technological breakthrough in this field. Atomic and nuclear physics based sensors might offer new possibilities in de-mining. Technology and methods derived from the studies applied to the detection of landmines can be successfully applied to the screening of cargo in customs inspections.

Information and Communication Technologies in Learning English as a Foreign Language (EFL): Attitudes of EFL Learners in Vietnam

ERIC Educational Resources Information Center

Ngo, Hong T. P.

2017-01-01

Given breakthroughs in information and communication technologies (ICTs), language learners are increasingly presented with opportunities to advance their proficiency in a target language (herein English as a foreign language or EFL). The attitudes of learners toward the use of ICTs (ICT attitudes) can be predictive of their adoption of ICTs for…

Oil-Free Shaft Support System Rotordynamics: Past, Present, and Future Challenges and Opportunities

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher

2011-01-01

Recent breakthroughs in Oil-Free technologies have enabled new high-speed rotor systems and turbomachinery. Such technologies can include compliant-surface gas bearings, magnetic bearings, and advanced solid lubricants and tribo-materials. This presentation briefly reviews critical technology developments and the current state-of-the-art, emerging Oil-Free rotor systems and discusses obstacles preventing more widespread use. Key examples of "best practices" for deploying Oil-Free technologies will be presented and remaining major technical questions surrounding Oil-Free technologies will be brought forward.

Science communication in Brazil: A historical review and considerations about the current situation.

PubMed

Massarani, Luisa; Moreira, Ildeu DE Castro

2016-09-01

In this paper, we present a historical overview of the science communication activities in Brazil since the nineteenth century and we analyze the current situation and its main concerns. The principal scopes and tools for science communication discussed here are the following: science centers and museums, mass media and large public events for communicating science and technology (S&T). In recent years, such activities have had a significant breakthrough in Brazil. Yet, there is still a long way to go in order to deliver a quality and extensive science and technology communication to the Brazilians as well as to achieve a suitable level of social appropriation of knowledge on S&T by the Brazilian society. Some of the main challenges that we are facing are discussed herein.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muhleman, T.; Dempsey, P.

Although reduced activity has left its mark on engineering budgets and many projects have been delayed, industry remains committed to research and development. This year's emphasis is offshore where new-generation semi-submersibles are under construction for Arctic waters and where equipment technology is reaching maturity. Improved tubulars such as new process-forged drill pipe, special alloy, corrosion-resistant pipe and new tool joint designs are finding eager markets both on and offshore. And back in the office, microcomputers, a curiosity a few years ago, are making significant advances in improving drilling and production operations. Specific examples of this new technology include: Two high-tech,more » high-risk floaters Hard rock sidewall coring tool New torque-resistant tool joint Two improved riser connection systems Breakthrough in drill pipe manufacturing Power-packed portable drilling computer.« less

Economics, socio-ecological resilience and ecosystem services.

PubMed

Farley, Joshua; Voinov, Alexey

2016-12-01

The economic process transforms raw materials and energy into economic products and waste. On a finite planet, continued economic growth threatens to surpass critical socio-ecological thresholds and undermine ecosystem services upon which humans and all other species depend. For most systems, whether such thresholds exist, where they lie and whether they are reversible cannot be known with certainty until they are crossed. We argue that our central economic challenge is to maintain the resilience of the current socio-ecological regime. We must reduce net impacts of economic activity to avoid critical ecological thresholds while ensuring economic necessities. Conventional economists pursue continuous growth as the central goal of economic activity, and assume that the price mechanism and technological breakthroughs ensure system resilience. Unfortunately, the price mechanism fails to address ecological thresholds because it ignores unowned ecosystem services, and fails to address economic thresholds because it ignores the needs of the poorest individuals, who live on the edge of them. Panarchy theory suggests that systems go through a cycle of growth, conservation, release and renewal. Managing a subsystem too long for growth or conservation-which many consider to be the goal of sustainability-actually threatens to collapse the higher-level system upon which that subsystem depends. Black Swan theory suggests we should seek to reduce the risk of catastrophic thresholds and promote the likelihood of technological breakthroughs. Economic degrowth, or planned release, is required to avoid catastrophic collapse. At the same time, publicly funded, open source information can help stimulate the technological breakthroughs economists count on to ensure resilience. Copyright © 2016. Published by Elsevier Ltd.

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scott Hara

2001-06-27

The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. The successful application of these technologies will result in expanding their implementation throughout the Wilmington Field and, through technology transfer, to other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block II-A (Tar II-A) has been relatively inefficient because of several producibility problems which are common in SBC reservoirs: inadequate characterization of the heterogeneous turbidite sands,more » high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery and reduce operating costs.« less

The Next Big Thing - Eric Haseltine

ScienceCinema

Eric Haseltine

2017-12-09

Eric Haseltine, Haseltine Partners president and former chief of Walt Disney Imagineering, presented "The Next Big Thing," on Sept. 11, at the ORNL. He described the four "early warning signs" that a scientific breakthrough is imminent, and then suggested practical ways to turn these insights into breakthrough innovations. Haseltine is former director of research at the National Security Agency and associate director for science and technology for the director of National Intelligence, former executive vice president of Walt Disney Imagineering and director of engineering for Hughes Aircraft. He has 15 patents in optics, special effects and electronic media, and more than 100 publications in science and technical journals, the web and Discover Magazine.

Visualizing Chemistry: The Progess and Promise of Advanced Chemical Imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Committee on Revealing Chemistry Through Advanced Chemical Imaging

2006-09-01

The field of chemical imaging can provide detailed structural, functional, and applicable information about chemistry and chemical engineering phenomena that have enormous impacts on medicine, materials, and technology. In recognizing the potential for more research development in the field of chemical imaging, the National Academies was asked by the National Science Foundation, Department of Energy, U.S. Army, and National Cancer Institute to complete a study that would review the current state of molecular imaging technology, point to promising future developments and their applications, and suggest a research and educational agenda to enable breakthrough improvements in the ability to image molecularmore » processes simultaneously in multiple physical dimensions as well as time. The study resulted in a consensus report that provides guidance for a focused research and development program in chemical imaging and identifies research needs and possible applications of imaging technologies that can provide the breakthrough knowledge in chemistry, materials science, biology, and engineering for which we should strive. Public release of this report is expected in early October.« less

Making synthetic mudstone: Parametric resedimentation studies at high effective stress to determine controls on breakthrough pressure and permeability

NASA Astrophysics Data System (ADS)

Guiltinan, E. J.; Cardenas, M. B.; Cockrell, L.; Espinoza, N.

2017-12-01

The geologic sequestration of CO2 is widely considered a potential solution for decreasing anthropogenic atmospheric CO2 emissions. As CO2 rises buoyantly within a reservoir it pools beneath a caprock and a pressure is exerted upon the pores of the caprock proportionally to the height of the pool. The breakthrough pressure is the point at which CO2 begins to flow freely across the caprock. Understanding the mineralogical and grain size controls on breakthrough pressure is important for screening the security of CO2 sequestration sites. However, breakthrough pressure and permeability measurements on caprocks are difficult to conduct in a systematic manner given the variability in and heterogeneity of naturally occurring mudstones and shales causing significant noise and scatter in the literature. Recent work has even revealed the ability for CO2 to pass through thin shale beds at relatively low pressures. To broaden the understanding of shale breakthrough and permeability, we developed an approach that allows for the creation of resedimented mudstones at high effective stresses. Resedimented samples also include calcium carbonate cement. Using this technique, we explore the controls on entry pressure, breakthrough pressure, and permeability of synthetic mudstones. Understanding the effect of mineralogy and grain size on the permeability and breakthrough pressure of mudstones at reservoir stresses will help in the selection and uncertainty quantification of secure CO2 storage sites.

Deep Space Systems Technology Program (DSST-X2000) Future Deliveries

NASA Technical Reports Server (NTRS)

Salvo, Christopher G.

1999-01-01

The number of deep space missions is increasing as we embark on a new era of exploration. New missions are "faster-better-cheaper" and cannot afford large individual investments in technology. A new process is needed fo allow these missions to take advantage of the technological breakthroughs that are critical to getting the cost down while increasing the science. The key is multimission technology development. NASA will make institutional investments in technology to benefit sets of missions. Continuous investment will provide a series of revolutions in technology to address common challenges in mission design and execution.

Behavioral and Social Science Research: A National Resource. Part II.

ERIC Educational Resources Information Center

Adams, Robert McC., Ed.; And Others

Areas of behavioral and social science research that have achieved significant breakthroughs in knowledge or application or that show future promise of achieving such breakthroughs are discussed in 12 papers. For example, the paper on formal demography shows how mathematical or statistical techniques can be used to explain and predict change in…

Laboratory Study of the Displacement Coalbed CH4 Process and Efficiency of CO2 and N2 Injection

PubMed Central

Wang, Liguo; Wang, Yongkang

2014-01-01

ECBM displacement experiments are a direct way to observe the gas displacement process and efficiency by inspecting the produced gas composition and flow rate. We conducted two sets of ECBM experiments by injecting N2 and CO2 through four large parallel specimens (300 × 50 × 50 mm coal briquette). N2 or CO2 is injected at pressures of 1.5, 1.8, and 2.2 MPa and various crustal stresses. The changes in pressure along the briquette and the concentration of the gas mixture flowing out of the briquette were analyzed. Gas injection significantly enhances CBM recovery. Experimental recoveries of the original extant gas are in excess of 90% for all cases. The results show that the N2 breakthrough occurs earlier than the CO2 breakthrough. The breakthrough time of N2 is approximately 0.5 displaced volumes. Carbon dioxide, however, breaks through at approximately 2 displaced volumes. Coal can adsorb CO2, which results in a slower breakthrough time. In addition, ground stress significantly influences the displacement effect of the gas injection. PMID:24741346

The effect of entrapped nonaqueous phase liquids on tracer transport in heterogeneous porous media: Laboratory experiments at the intermediate scale

USGS Publications Warehouse

Barth, Gilbert R.; Illangasekare, T.H.; Rajaram, H.

2003-01-01

This work considers the applicability of conservative tracers for detecting high-saturation nonaqueous-phase liquid (NAPL) entrapment in heterogeneous systems. For this purpose, a series of experiments and simulations was performed using a two-dimensional heterogeneous system (10??1.2 m), which represents an intermediate scale between laboratory and field scales. Tracer tests performed prior to injecting the NAPL provide the baseline response of the heterogeneous porous medium. Two NAPL spill experiments were performed and the entrapped-NAPL saturation distribution measured in detail using a gamma-ray attenuation system. Tracer tests following each of the NAPL spills produced breakthrough curves (BTCs) reflecting the impact of entrapped NAPL on conservative transport. To evaluate significance, the impact of NAPL entrapment on the conservative-tracer breakthrough curves was compared to simulated breakthrough curve variability for different realizations of the heterogeneous distribution. Analysis of the results reveals that the NAPL entrapment has a significant impact on the temporal moments of conservative-tracer breakthrough curves. ?? 2003 Elsevier B.V. All rights reserved.

Use of mobile data for weather-responsive traffic management models.

DOT National Transportation Integrated Search

2012-10-01

The evolution of telecommunications and wireless technologies has brought in new sources of traffic data (particularly mobile data generated by vehicle probes), which could offer a breakthrough in the quality and extent of traffic data. This study re...

Breakthrough Technologies Developed by the Air Force Research Laboratory and Its Predecessors

DTIC Science & Technology

2005-12-21

quickly plan its most economical fabrication within the constraints of schedule, availability of raw materials, and variability of materials and...intensive—more efficient and economical . ManTech introduced automation and inspection technologies, including the use of scanning electron...the novel use of asphalt mixed with ammonium nitrate as a solid propellant, a mixture first devised at the Jet Propulsion Laboratory. That line of

Development of a high efficiency thin silicon solar cell

NASA Technical Reports Server (NTRS)

Lindmayer, J.; Wrigley, C. Y.

1977-01-01

A key to the success of this program was the breakthrough development of a technology for producing ultra-thin silicon slices which are very flexible, resilient, and tolerant of moderate handling abuse. Experimental topics investigated were thinning technology, gaseous junction diffusion, aluminum back alloying, internal reflectance, tantalum oxide anti-reflective coating optimization, slice flexibility, handling techniques, production rate limiting steps, low temperature behavior, and radiation tolerance.

Stochastic Lotka-Volterra equations: A model of lagged diffusion of technology in an interconnected world

NASA Astrophysics Data System (ADS)

Chakrabarti, Anindya S.

2016-01-01

We present a model of technological evolution due to interaction between multiple countries and the resultant effects on the corresponding macro variables. The world consists of a set of economies where some countries are leaders and some are followers in the technology ladder. All of them potentially gain from technological breakthroughs. Applying Lotka-Volterra (LV) equations to model evolution of the technology frontier, we show that the way technology diffuses creates repercussions in the partner economies. This process captures the spill-over effects on major macro variables seen in the current highly globalized world due to trickle-down effects of technology.

Planning for optical disk technology with digital cartography.

USGS Publications Warehouse

Light, D.L.

1986-01-01

A major shortfall that still exists in digital systems is the need for very large mass storage capacity. The decade of the 1980s has introduced laser optical disk storage technology, which may be the breakthrough needed for mass storage. This paper addresses system concepts for digital cartography during the transition period. Emphasis will be placed on determining USGS mass storage requirements and introducing laser optical disk technology for handling storage problems for digital data in this decade.-from Author

The ARPA-E Innovation Model: A Glimpse into the Future of Automotive Battery Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gur, Ilan

2014-03-07

The Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E) focuses on funding game-changing R&D aimed at reducing U.S. foreign energy dependence and emissions. ARPA-E has made a strong commitment to support breakthrough energy storage technologies that can accelerate the mass adoption of electrified vehicles. This presentation will highlight the range of ARPA-E's efforts in this area, offering a glimpse into the ARPA-E innovation model and the future of automotive battery technology.

Ceramic matrix composites - Forerunners of technological breakthrough in space vehicle hot structures and thermal protection system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lacombe, A.; Rouges, J.

1990-01-01

The current status of carbon-carbon and carbon-silicon carbide composites developed for aerospace applications is reviewed. In particular, attention is given to production facilities and technologies for the manufacture of C-C and C-SiC composites, mechanical and thermal characteristics of carbon-carbon and carbon-silicon carbide materials, applications to thermal structures and protection, and technologies developed to build large C-SiC thermostructural components within the Hermes program. 9 refs.

Breakthrough discoveries in drug delivery technologies: the next 30 years.

PubMed

Brambilla, Davide; Luciani, Paola; Leroux, Jean-Christophe

2014-09-28

What if we could open the 2044 special issue of the Journal of Controlled Release? Which drug delivery technologies will have led the field? Which ones will have successfully reached the marketplace? In attempting to answer these questions, we selected a few recent technologies and concepts that could, in our opinion, play a crucial role in coming years. In each case, emblematic papers are cited to introduce and discuss the selected topic. Copyright © 2014 Elsevier B.V. All rights reserved.

[The clinical application of three dimention printing technology].

PubMed

Zhong, S Z; Fang, C H

2016-09-01

In recent years, the three-dimentional(3D)printing technology is gradually applied in medicine.Now, the 3D printing has already play an important role in medical education, surgical device development, prosthesis implantation and so on.There are still many challenges and difficulties in the clinical overall application of 3D printing for some time, but it also contains a huge application prospect.Once with appropriate applications of this technology, it will be a major breakthrough in iatrical history once more.

The ARPA-E Innovation Model: A Glimpse into the Future of Automotive Battery Technology

ScienceCinema

Gur, Ilan (Program Director and Senior Advisor, ARPA-E)

2018-02-02

The Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E) focuses on funding game-changing R&D aimed at reducing U.S. foreign energy dependence and emissions. ARPA-E has made a strong commitment to support breakthrough energy storage technologies that can accelerate the mass adoption of electrified vehicles. This presentation will highlight the range of ARPA-E's efforts in this area, offering a glimpse into the ARPA-E innovation model and the future of automotive battery technology.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Since its creation in 1946, Argonne National Laboratory has addressed the nation’s most pressing challenges in science, energy, the environment, and national security. United by a common goal – to improve the world – Argonne continues to drive the scientific and technological breakthroughs needed to ensure a sustainable future.

[Effects of biochar application on the vertical transport of NO(3-)-N in the red soil and its simulation].

PubMed

Jing, Yan; Chen, Xiao-Min; Li, Qiu-Xia; Jin, Ze-Wen; Huang, Qian-Ru; Zhang, Jia-Bao; Chen, Chen; Lu, Shao-Shan

2014-11-01

Soil column experiments in laboratory were conducted to determine the effect of biochar application on the vertical transport of NO(3-)-N in red soil. Biochar was mixed thoroughly with soil at rates of 0, 5, 10, 20, 30 and 40 t · hm(-2), i. e., biochar/soil ratios of 0, 2.22%, 4.459%, 8.95%, 13.37% and 17.80%. The CXTFIT 2.0 model was used to simulate the breakthrough curve of NO(3-)-N. The results were as follows: the breakthrough curve of NO(3-)-N varied remarkably with the increase of biochar application rate under saturated condition. The peak values of relative concentration (C/Co) , leaching rate and cumulative loss of NO(3-)-N all significantly decreased with the increasing biochar application rate. There existed a certain prolongation of the breakthrough curves among all treatments. The more the biochar was applied, the more obviously the break-through curve was prolonged. According to the correlation analysis between the NO(3-)-N break-through curves and soil properties, biochar affected the bulk density, organic carbon, total porosity, CEC of red soil, which would exert an effect on the breakthrough curves. The simulation value and the actual obtained value of the breakthrough curves were positively correlated with the correlation coefficients being over 0. 850 in all breakthrough curves, which indicated the CXTFIT 2.0 model could best fit the prediction of nitrate-N transport and relative infiltration. These results could provide a scientific basis for predicting the effect of biochar on nitrate-N in underground water after biochar incorporation into field.

New Laboratory Tools for Emerging Bacterial Challenges.

PubMed

Fournier, Pierre-Edouard; Drancourt, Michel; Raoult, Didier

2017-08-15

Since its creation, the Méditerranée-Infection foundation has aimed at optimizing the management of infectious diseases and surveying the local and global epidemiology. This pivotal role was permitted by the development of rational sampling, point-of-care tests, and extended automation as well as new technologies, including mass spectrometry for colony identification, real-time genomics for isolate characterization, and the development of versatile and permissive culture systems. By identifying and characterizing emerging microbial pathogens, these developments provided significant breakthroughs in infectious diseases. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

Towards Organs on Demand: Breakthroughs and Challenges in Models of Organogenesis.

PubMed

Francipane, Maria Giovanna; Lagasse, Eric

2016-09-01

In recent years, functional three-dimensional (3D) tissue generation in vitro has been significantly advanced by tissue-engineering methods, achieving better reproduction of complex native organs compared to conventional culture systems. This review will discuss traditional 3D cell culture techniques as well as newly developed technology platforms. These recent techniques provide new possibilities in the creation of human body parts and provide more accurate predictions of tissue response to drug and chemical challenges. Given the rapid advancement in the human induced pluripotent stem cell (iPSC) field, these platforms also hold great promise in the development of patient-specific, transplantable tissues and organs on demand.

Science & Technology Review November 2006

DOE Office of Scientific and Technical Information (OSTI.GOV)

Radousky, H

This months issue has the following articles: (1) Expanded Supercomputing Maximizes Scientific Discovery--Commentary by Dona Crawford; (2) Thunder's Power Delivers Breakthrough Science--Livermore's Thunder supercomputer allows researchers to model systems at scales never before possible. (3) Extracting Key Content from Images--A new system called the Image Content Engine is helping analysts find significant but hard-to-recognize details in overhead images. (4) Got Oxygen?--Oxygen, especially oxygen metabolism, was key to evolution, and a Livermore project helps find out why. (5) A Shocking New Form of Laserlike Light--According to research at Livermore, smashing a crystal with a shock wave can result in coherent light.

The Next Big Thing - Eric Haseltine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eric Haseltine

2009-09-16

Eric Haseltine, Haseltine Partners president and former chief of Walt Disney Imagineering, presented "The Next Big Thing," on Sept. 11, at the ORNL. He described the four "early warning signs" that a scientific breakthrough is imminent, and then suggested practical ways to turn these insights into breakthrough innovations. Haseltine is former director of research at the National Security Agency and associate director for science and technology for the director of National Intelligence, former executive vice president of Walt Disney Imagineering and director of engineering for Hughes Aircraft. He has 15 patents in optics, special effects and electronic media, and moremore » than 100 publications in science and technical journals, the web and Discover Magazine.« less

Predicting the Risk of Breakthrough Urinary Tract Infections: Primary Vesicoureteral Reflux.

PubMed

Hidas, Guy; Billimek, John; Nam, Alexander; Soltani, Tandis; Kelly, Maryellen S; Selby, Blake; Dorgalli, Crystal; Wehbi, Elias; McAleer, Irene; McLorie, Gordon; Greenfield, Sheldon; Kaplan, Sherrie H; Khoury, Antoine E

2015-11-01

We constructed a risk prediction instrument stratifying patients with primary vesicoureteral reflux into groups according to their 2-year probability of breakthrough urinary tract infection. Demographic and clinical information was retrospectively collected in children diagnosed with primary vesicoureteral reflux and followed for 2 years. Bivariate and binary logistic regression analyses were performed to identify factors associated with breakthrough urinary tract infection. The final regression model was used to compute an estimation of the 2-year probability of breakthrough urinary tract infection for each subject. Accuracy of the binary classifier for breakthrough urinary tract infection was evaluated using receiver operator curve analysis. Three distinct risk groups were identified. The model was then validated in a prospective cohort. A total of 252 bivariate analyses showed that high grade (IV or V) vesicoureteral reflux (OR 9.4, 95% CI 3.8-23.5, p <0.001), presentation after urinary tract infection (OR 5.3, 95% CI 1.1-24.7, p = 0.034) and female gender (OR 2.6, 95% CI 0.097-7.11, p <0.054) were important risk factors for breakthrough urinary tract infection. Subgroup analysis revealed bladder and bowel dysfunction was a significant risk factor more pronounced in low grade (I to III) vesicoureteral reflux (OR 2.8, p = 0.018). The estimation model was applied for prospective validation, which demonstrated predicted vs actual 2-year breakthrough urinary tract infection rates of 19% vs 21%. Stratifying the patients into 3 risk groups based on parameters in the risk model showed 2-year risk for breakthrough urinary tract infection was 8.6%, 26.0% and 62.5% in the low, intermediate and high risk groups, respectively. This proposed risk stratification and probability model allows prediction of 2-year risk of patient breakthrough urinary tract infection to better inform parents of possible outcomes and treatment strategies. Copyright © 2015 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

The Wyss institute: A new model for medical technology innovation and translation across the academic-industrial interface.

PubMed

Tolikas, Mary; Antoniou, Ayis; Ingber, Donald E

2017-09-01

The Wyss Institute for Biologically Inspired Engineering at Harvard University was formed based on the recognition that breakthrough discoveries cannot change the world if they never leave the laboratory. The Institute's mission is to discover the biological principles that Nature uses to build living things, and to harness these insights to create biologically inspired engineering innovations to advance human health and create a more sustainable world. Since its launch in 2009, the Institute has developed a new model for innovation, collaboration, and technology translation within academia, breaking "silos" to enable collaborations that cross institutional and disciplinary barriers. Institute faculty and staff engage in high-risk research that leads to transformative breakthroughs. The biological principles uncovered are harnessed to develop new engineering solutions for medicine and healthcare, as well as nonmedical areas, such as energy, architecture, robotics, and manufacturing. These technologies are translated into commercial products and therapies through collaborations with clinical investigators, corporate alliances, and the formation of new start-ups that are driven by a unique internal business development team including entrepreneurs-in-residence with domain-specific expertise. Here, we describe this novel organizational model that the Institute has developed to change the paradigm of how fundamental discovery, medical technology innovation, and commercial translation are carried out at the academic-industrial interface.

An Evaluation of Technology to Remove Problematic Organic Compounds from the International Space Station Potable Water

NASA Technical Reports Server (NTRS)

Rector, Tony; Metselaar, Carol; Peyton, Barbara; Steele, John; Michalek, William; Bowman, Elizabeth; Wilson, Mark; Gazda, Daniel; Carter, Layne

2014-01-01

Since activation of the Water Processor Assembly (WPA) on the International Space Station (ISS) in November of 2008, there have been three events in which the TOC (Total Organic Carbon) in the product water has increased to approximately 3 mg/L and has subsequently recovered. Analysis of the product water in 2010 identified the primary component of the TOC as dimethylsilanediol (DMSD). An investigation into the fate of DMSD in the WPA ultimately determined that replacement of both Multifiltration (MF) Beds is the solution to recovering product water quality. The MF Beds were designed to ensure that ionic breakthrough occurs before organic breakthrough. However, DMSD saturated both MF Beds in the series, requiring removal and replacement of both MF Beds with significant life remaining. Analysis of the MF Beds determined that the adsorbent was not effectively removing DMSD, trimethylsilanol, various polydimethylsiloxanes, or dimethylsulfone. Coupled with the fact that the current adsorbent is now obsolete, the authors evaluated various media to identify a replacement adsorbent as well as media with greater capacity for these problematic organic contaminants. This paper provides the results and recommendations of this collaborative study.

GENETICALLY MODIFIED FOODS: TECHNOLOGICAL BREAKTHROUGH OR ECOLOGICAL NIGHMARE?

EPA Science Inventory

Fifty years ago, Wastson and Crick described the structure of DNA, setting the stage for the past decade's biotechnology revolution. Scientists have now broken the code of the entire human genome, and delineated the function of multiple genes; similar strides are being taken with...

Finding the right prescription.

PubMed

Runy, Lee Ann

2005-05-01

Demand for pharmacists continues to outpace supply, and with competition from commercial chains intensifying, hospitals' staffing woes won't ease any time soon. To fill the void, hospital executives are considering a number of aggressive steps, exploring everything from better pay and benefits to outsourcing to technological breakthroughs.

Breakthrough: Fighting Cancer with Nanoparticles

ScienceCinema

Rozhkova, Elena

2018-05-07

Argonne nanoscientist Elena Rozhkova is studying ways to enlist nanoparticles to treat brain cancer. This nano-bio technology may eventually provide an alternative form of therapy that targets only cancer cells and does not affect normal living tissue. Read more at http://1.usa.gov/JAXh7Q.

Guest Editorial Modeling and Advanced Control of Wind Turbines/Wind Farms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, J.; Hou, Y.; Zhu, Z.

2017-09-01

The papers in this special section brings together papers focused on the recent advancements and breakthroughs in the technology of modeling and enhanced active/reactive power control of wind power conversion systems, ranging from components of wind turbines to wind farms.

Green Approach to the Synthesis of Nanomaterials and Sustainable Applications of Nano-Catalysts

EPA Science Inventory

The generation of engineered nanomaterials represents a major breakthrough and the successful commercialization of this disruptive technology is important for varied applications to humans and global growth but serious attention is needed for the assessment of potential health an...

A 100-Year Review: A century of change in temperate grazing dairy systems.

PubMed

Roche, J R; Berry, D P; Bryant, A M; Burke, C R; Butler, S T; Dillon, P G; Donaghy, D J; Horan, B; Macdonald, K A; Macmillan, K L

2017-12-01

From 1917 to 2017, dairy grazing systems have evolved from uncontrolled grazing of unimproved pastures by dual-purpose dairy-beef breeds to an intensive system with a high output per unit of land from a fit-for-purpose cow. The end of World War I signaled significant government investments in agricultural research institutes around the world, which coincided with technological breakthroughs in milk harvesting and a recognition that important traits in both plants and animals could be improved upon relatively rapidly through genetic selection. Uptake of milk recording and herd testing increased rapidly through the 1920s, as did the recognition that pastures that were rested in between grazing events yielded more in a year than those continuously grazed. This, and the invention and refinement of the electric fence, led to the development of "controlled" rotational grazing. This, in itself, facilitated greater stocking rates and a 5 to 10% increase in milk output per hectare but, perhaps more importantly, it allowed a more efficient use of nitrogen fertilizer, further increasing milk output/land area by 20%. Farmer inventions led to the development of the herringbone and rotary milking parlors, which, along with the "unshortable" electric fence and technological breakthroughs in sperm dilution rates, allowed further dairy farm expansion. Simple but effective technological breakthroughs in reproduction ensured that cows were identified in estrus early (a key factor in maintaining the seasonality of milk production) and enabled researchers to quantify the anestrus problem in grazing herds. Genetic improvement of pasture species has lagged its bovine counterpart, but recent developments in multi-trait indices as well as investment in genetic technologies should significantly increase potential milk production per hectare. Decades of research on the use of feeds other than pasture (i.e., supplementary feeds) have provided consistent milk production responses when the reduction in pasture intake associated with the provision of supplementary feed (i.e., substitution rate) is accounted for. A unique feature of grazing systems research over the last 70 yr has been the use of multi-year farm systems experimentation. These studies have allowed the evaluation of strategic changes to a component of the system on all the interacting features of the system. This technique has allowed excellent component research to be "systemized" and is an essential part of the development of the intensive grazing production system that exists today. Future challenges include the provision of skilled labor or specifically designed automation to optimize farm management and both environmental sustainability and animal welfare concerns, particularly relating to the concentration of nitrogen in each urine patch and the associated risk of nitrate leaching, as well as concerns regarding exposure of animals to harsh climatic conditions. These combined challenges could affect farmers' "social license" to farm in the future. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Effect of CH4 on the CO2 breakthrough pressure and permeability of partially saturated low-permeability sandstone in the Ordos Basin, China

NASA Astrophysics Data System (ADS)

Zhao, Yan; Yu, Qingchun

2018-01-01

The behavior of CO2 that coexists with CH4 and the effect of CH4 on the CO2 stream need to be deeply analyzed and studied, especially in the presence of water. Our previous studies investigated the breakthrough pressure and permeability of pure CO2 in five partially saturated low-permeability sandstone core samples from the Ordos Basin, and we concluded that rocks with a small pore size and low permeability show considerable sealing capacity even under unsaturated conditions. In this paper, we selected three of these samples for CO2-CH4 gas-mixture breakthrough experiments under various degrees of water saturation. The breakthrough experiments were performed by increasing the gas pressure step by step until breakthrough occurred. Then, the effluent gas mixture was collected for chromatographic partitioning analysis. The results indicate that CH4 significantly affects the breakthrough pressure and permeability of CO2. The presence of CH4 in the gas mixture increases the interfacial tension and, thus, the breakthrough pressure. Therefore, the injected gas mixture that contains the highest (lowest) mole fraction of CH4 results in the largest (smallest) breakthrough pressure. The permeability of the gas mixture is greater than that for pure CO2 because of CH4, and the effective permeability decreases with increased breakthrough pressure. Chromatographic partitioning of the effluent mixture gases indicates that CH4 breaks through ahead of CO2 as a result of its weaker solubility in water. Correlations are established between (1) the breakthrough pressure and water saturation, (2) the effective permeability and water saturation, (3) the breakthrough pressure and effective permeability, and (4) the mole fraction of CO2/CH4 in the effluent mixture gases and water saturation. These results deepen our understanding of the multi-phase flow behavior in the porous media under unsaturated conditions, which have implications for formulating emergency response plans for gas leakage into unsaturated zones. Finally, knowing the flow characteristic of gas mixture can guide CO2 storage, CO2-EOR and CO2-ECBM projects. Future studies should pay attention to the effects of saline water with different salt types and concentrations on the multi-phase flow behavior with applications to geological CO2 storage and energy storage using CH4.

Analysis of utilization technologies for Eichhornia crassipes biomass harvested after restoration of wastewater.

PubMed

Feng, Wei; Xiao, Kai; Zhou, Wenbing; Zhu, Duanwei; Zhou, Yiyong; Yuan, Yu; Xiao, Naidong; Wan, Xiaoqiong; Hua, Yumei; Zhao, Jianwei

2017-01-01

Eichhornia crassipes (EC, water hyacinth) has gained attention due to its alarming reproductive capacity, which subsequently leads to serious ecological damage of water in many eutrophic lakes in the world. The traditional mechanical removal methods have disadvantages. They squander this valuable lignocellulosic resource. Meanwhile, there is a bottleneck for the subsequently reasonable and efficient utilization of EC biomass on a large scale after phytoremediation of polluted water using EC. As a result, the exploration of effective EC utilization technologies has become a popular research field. After years of exploration and amelioration, there have been significant breakthroughs in this research area, including the synthesis of excellent EC cellulose-derived materials, innovative bioenergy production, etc. This review organizes the research of the utilization of the EC biomass among several important fields and then analyses the advantages and disadvantages for each pathway. Finally, comprehensive EC utilization technologies are proposed as a reference. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optimizing The DSSC Fabrication Process Using Lean Six Sigma

NASA Astrophysics Data System (ADS)

Fauss, Brian

Alternative energy technologies must become more cost effective to achieve grid parity with fossil fuels. Dye sensitized solar cells (DSSCs) are an innovative third generation photovoltaic technology, which is demonstrating tremendous potential to become a revolutionary technology due to recent breakthroughs in cost of fabrication. The study here focused on quality improvement measures undertaken to improve fabrication of DSSCs and enhance process efficiency and effectiveness. Several quality improvement methods were implemented to optimize the seven step individual DSSC fabrication processes. Lean Manufacturing's 5S method successfully increased efficiency in all of the processes. Six Sigma's DMAIC methodology was used to identify and eliminate each of the root causes of defects in the critical titanium dioxide deposition process. These optimizations resulted with the following significant improvements in the production process: 1. fabrication time of the DSSCs was reduced by 54 %; 2. fabrication procedures were improved to the extent that all critical defects in the process were eliminated; 3. the quantity of functioning DSSCs fabricated was increased from 17 % to 90 %.

Genome engineering in ophthalmology: Application of CRISPR/Cas to the treatment of eye disease.

PubMed

Hung, Sandy S C; McCaughey, Tristan; Swann, Olivia; Pébay, Alice; Hewitt, Alex W

2016-07-01

The Clustered Regularly Interspaced Short Palindromic Repeat (CRISPR) and CRISPR-associated protein (Cas) system has enabled an accurate and efficient means to edit the human genome. Rapid advances in this technology could results in imminent clinical application, and with favourable anatomical and immunological profiles, ophthalmic disease will be at the forefront of such work. There have been a number of breakthroughs improving the specificity and efficacy of CRISPR/Cas-mediated genome editing. Similarly, better methods to identify off-target cleavage sites have also been developed. With the impending clinical utility of CRISPR/Cas technology, complex ethical issues related to the regulation and management of the precise applications of human gene editing must be considered. This review discusses the current progress and recent breakthroughs in CRISPR/Cas-based gene engineering, and outlines some of the technical issues that must be addressed before gene correction, be it in vivo or in vitro, is integrated into ophthalmic care. We outline a clinical pipeline for CRISPR-based treatments of inherited eye diseases and provide an overview of the important ethical implications of gene editing and how these may influence the future of this technology. Copyright © 2016 Elsevier Ltd. All rights reserved.

Galvanic Liquid Applied Coating System For Protection of Embedded Steel Surfaces from Corrosion

NASA Technical Reports Server (NTRS)

Curran, Joseph; Curran, Jerome; Voska, N. (Technical Monitor)

2002-01-01

Corrosion of reinforcing steel in concrete is an insidious problem facing Kennedy Space Center (KSC), other Government Agencies, and the general public. These problems include KSC launch support structures, highway bridge infrastructure, and building structures such as condominium balconies. Due to these problems, the development of a Galvanic Liquid Applied Coating System would be a breakthrough technology having great commercial value for the following industries: Transportation, Infrastructure, Marine Infrastructure, Civil Engineering, and the Construction Industry. This sacrificial coating system consists of a paint matrix that may include metallic components, conducting agents, and moisture attractors. Similar systems have been used in the past with varying degrees of success. These systems have no proven history of effectiveness over the long term. In addition, these types of systems have had limited success overcoming the initial resistance between the concrete/coating interface. The coating developed at KSC incorporates methods proven to overcome the barriers that previous systems could not achieve. Successful development and continued optimization of this breakthrough system would produce great interest in NASA/KSC for corrosion engineering technology and problem solutions. Commercial patents on this technology would enhance KSC's ability to attract industry partners for similar corrosion control applications.

Identification of Preferential Groundwater Flow Pathways from Local Tracer Breakthrough Curves

NASA Astrophysics Data System (ADS)

Kokkinaki, A.; Sleep, B. E.; Dearden, R.; Wealthall, G.

2009-12-01

Characterizing preferential groundwater flow paths in the subsurface is a key factor in the design of in situ remediation technologies. When applying reaction-based remediation methods, such as enhanced bioremediation, preferential flow paths result in fast solute migration and potentially ineffective delivery of reactants, thereby adversely affecting treatment efficiency. The presence of such subsurface conduits was observed at the SABRe (Source Area Bioremediation) research site. Non-uniform migration of contaminants and electron donor during the field trials of enhanced bioremediation supported this observation. To better determine the spatial flow field of the heterogeneous aquifer, a conservative tracer test was conducted. Breakthrough curves were obtained at a reference plane perpendicular to the principal groundwater flow direction. The resulting dataset was analyzed using three different methods: peak arrival times, analytical solution fitting and moment analysis. Interpretation using the peak arrival time method indicated areas of fast plume migration. However, some of the high velocities are supported by single data points, thus adding considerable uncertainty to the estimated velocity distribution. Observation of complete breakthrough curves indicated different types of solute breakthrough, corresponding to different transport mechanisms. Sharp peaks corresponded to high conductivity preferential flow pathways, whereas more dispersed breakthrough curves with long tails were characteristic of significant dispersive mixing and dilution. While analytical solutions adequately quantified flow characteristics for the first type of curves, they failed to do so for the second type, in which case they gave unrealistic results. Therefore, a temporal moment analysis was performed to obtain complete spatial distributions of mass recovery, velocity and dispersivity. Though the results of moment analysis qualitatively agreed with the results of previous methods, more realistic estimates of velocities were obtained and the presence of one major preferential flow pathway was confirmed. However, low mass recovery and deviations from the 10% scaling rule for dispersivities indicate that insufficient spatial and temporal monitoring, as well as interpolation and truncation errors introduced uncertainty in the flow and transport parameters estimated by the method of moments. The results of the three analyses are valuable for enhancing the understanding of mass transport and remediation performance. Comparing the different interpretation methods, increasing the amount of concentration data considered in the analysis, the derived velocity fields were smoother and the estimated local velocities and dispersivities became more realistic. In conclusion, moment analysis is a method that represents a smoothed average of the velocity across the entire breakthrough curve, whereas the peak arrival time, which may be a less well constrained estimate, represents the physical peak arrival and typically yields a higher velocity than the moment analysis. This is an important distinction when applying the results of the tracer test to field sites.

"Knowledge Universe" and Virtual Schools: Educational Breakthrough or Digital Raid on the Public Treasury? Report

ERIC Educational Resources Information Center

Bracey, Gerald W.

2004-01-01

Correspondence schools, motion pictures, radio, educational television, and computer-assisted instruction have all been hailed as technological innovations that would revolutionize education, reducing, if not eliminating entirely, education's dependence on traditional schools and their teachers. The latest innovation is "virtual…

An American Crisis

ERIC Educational Resources Information Center

Padron, Eduardo J.

2009-01-01

Today, America faces a shifting and demanding economic and workforce environment. Americans know that the workplace is changing but not where it's heading. Each demonstration of the latest breakthrough technology can have enormous impact on the society, opening up entire new industries and markets and instantly limiting the viability of others. Of…

The Outline of Personhood Law Regarding Artificial Intelligences and Emulated Human Entities

NASA Astrophysics Data System (ADS)

Muzyka, Kamil

2013-12-01

On the verge of technological breakthroughs, which define and revolutionize our understanding of intelligence, cognition, and personhood, especially when speaking of artificial intelligences and mind uploads, one must consider the legal implications of granting personhood rights to artificial intelligences or emulated human entities

National Space Transportation and Support Study/technology requirements and plans

NASA Technical Reports Server (NTRS)

Walberg, G. D.; Gasperich, F. J., Jr.; Scheyhing, E. R.

1986-01-01

This paper presents a generic technology plan which has been developed as part of the National Space Transportation and Support Study. This program, which addresses a wide variety of potentially high payoff technology areas, is structured to promote both enhanced vehicle performance and greatly improved operational efficiency and includes both evolutionary and breakthrough technologies. The plan is presented in terms of disciplinary plan elements, which were developed by joint NASA/USAF disciplinary working groups, and as a set of demonstration projects which serve as focal points for the overall plan and drive the development of the many interrelated disciplinary activities.

FY10 Engineering Innovations, Research and Technology Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lane, M A; Aceves, S M; Paulson, C N

This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&Dmore » 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.« less

Carbon nanostructures for solar energy conversion schemes.

PubMed

Guldi, Dirk M; Sgobba, Vito

2011-01-14

Developing environmentally friendly, renewable energy is one of the challenges to society in the 21st century. One of the renewable energy technologies is solar energy conversion--a technology that directly converts daylight into electricity. This highlight surveys recent breakthroughs in the field of implementing carbon nanostructures--fullerenes (0D), carbon nanotubes (1D), carbon nanohorns, and graphene (2D)--into solar energy conversion schemes, that is, bulk heterojunction and dye-sensitized solar cells.

Potential Benefits of Manmade Opals Demonstrated for First Time (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

NREL experiments show that disordered inverse opals significantly scatter and trap near-infrared light, with possible impact on optoelectronic materials. Inverse opals, familiar in the form of brilliantly colored opal gemstones, are a class of materials that has astounding optical properties. Scientists have been exploring the ability of inverse opals to manipulate light in the hopes of harnessing this capacity for advanced technologies such as displays, detectors, lasers, and photovoltaics. A research group at the National Renewable Energy Laboratory (NREL) discovered that man-made inverse opal films containing significant morphological disorder exhibit substantial light scattering, consequently trapping wavelengths in the near-infrared (NIR),more » which is important to a number of technologies. This discovery is the first experimental evidence to validate a 2005 theoretical model predicting the confinement of light in such structures, and it holds great promise for improving the performance of technologies that rely on careful light control. This breakthrough also makes possible optoelectronic technologies that use a range of low-cost molecular and semiconductor species that otherwise absorb light too weakly to be useful. The disordered inverse opal architecture validates the theoretical model that predicts the diffusion and confinement of light in such structures. Electrochemically deposited CdSe inverse opal films containing significant morphological disorder exhibit substantial light scattering and consequent NIR light trapping. This discovery holds promise for NIR light management in optoelectronic technologies, particularly those involving weakly absorbing molecular and semiconductor photomaterials.« less

A fixed inhaled nitrous oxide/oxygen mixture as an analgesic for adult cancer patients with breakthrough pain: study protocol for a randomized controlled trial.

PubMed

Liu, Qiang; Wang, Yu; Luo, Xiang-Jiang; Wang, Ning-Ju; Chen, Ping; Jin, Xin; Mu, Guo-Xia; Chai, Xiao-Min; Zhang, Yue-Juan; Li, Yu-Xiang; Yu, Jian-Qiang

2017-01-11

The management of breakthrough pain in cancer patients is always a challenge for medical professions. Occurring in 80% of cancer patients with advanced disease, breakthrough pain significantly decreases both patient's and caregiver's quality of life. The aim of this study is to assess the analgesic efficacy of a fixed inhaled nitrous oxide/oxygen mixture for adult cancer patients with breakthrough pain. This is a randomized, placebo-controlled, double-blind study; it will be conducted in the General Hospital of Ningxia Medical University. The target study subjects are at least 18 years old, and are hospitalized cancer patients who are receiving routine opioids to control cancer-related pain but still experience breakthrough pain. A total of 240 patients will be recruited and randomly allocated between three treatment groups (A, B, C) and a control group (group D) in a ratio of 3:1. All treatment groups (A, B, C) will receive standard pain treatment (oral immediate-release morphine) plus a pre-prepared nitrous oxide/oxygen mixture, and the control group (D) will receive the standard pain treatment plus oxygen. Patients, doctors, nurses, and data collectors are all blind to the experiment. Assessments will be taken before treatment (T0), at 5 min (T1) and 15 min (T2) during treatment, and at 5 min after treatment (T3). The primary endpoint measures will be the percentage of patients whose pain is relieved at T1, T2, and T3. Secondary outcome measures will include the safety of treatment, adverse events, and satisfaction from both health professionals and patients. This study aims to provide an effective and practical intervention for a fast breakthrough pain relief and to improve cancer patients' quality of life significantly. The Evidence-Based Medicine Working Group claim that a randomized, double-blind, placebo-controlled experimental intervention is the most appropriate design to demonstrate its efficacy, so this study could give a new approach to controlling breakthrough pain episodes. ChiCTR-INC-16008075 . Registered on 8 March 2016.

Taking Battery Technology from the Lab to the Big City

DOE Office of Scientific and Technical Information (OSTI.GOV)

Banerjee, Sanjoy; Shmukler, Michael; Martin, Cheryl

2013-07-29

Urban Electric Power, a startup formed by researchers from the City University of New York (CUNY) Energy Institute, is taking breakthroughs in battery technology from the lab to the market. With industry and government funding, including a grant from the Energy Department, Urban Electric Power developed a zinc-nickel oxide battery electrolyte that circulates constantly, eliminating dendrite formation and preventing battery shortages. Their new challenge is to take this technology to the market, where they can scale up the batteries for reducing peak energy demand in urban areas and storing variable renewable electricity.

Taking Battery Technology from the Lab to the Big City

ScienceCinema

Banerjee, Sanjoy; Shmukler, Michael; Martin, Cheryl

2018-02-02

Urban Electric Power, a startup formed by researchers from the City University of New York (CUNY) Energy Institute, is taking breakthroughs in battery technology from the lab to the market. With industry and government funding, including a grant from the Energy Department, Urban Electric Power developed a zinc-nickel oxide battery electrolyte that circulates constantly, eliminating dendrite formation and preventing battery shortages. Their new challenge is to take this technology to the market, where they can scale up the batteries for reducing peak energy demand in urban areas and storing variable renewable electricity.

The impact of loading approach and biological activity on NOM removal by ion exchange resins.

PubMed

Winter, Joerg; Wray, Heather E; Schulz, Martin; Vortisch, Roman; Barbeau, Benoit; Bérubé, Pierre R

2018-05-01

The present study investigated the impact of different loading approaches and microbial activity on the Natural Organic Matter (NOM) removal efficiency and capacity of ion exchange resins. Gaining further knowledge on the impact of loading approaches is of relevance because laboratory-scale multiple loading tests (MLTs) have been introduced as a simpler and faster alternative to column tests for predicting the performance of IEX, but only anecdotal evidence exists to support their ability to forecast contaminant removal and runtime until breakthrough of IEX systems. The overall trends observed for the removal and the time to breakthrough of organic material estimated using MLTs differed from those estimated using column tests. The results nonetheless suggest that MLTs could best be used as an effective tool to screen different ion exchange resins in terms of their ability to remove various contaminants of interest from different raw waters. The microbial activity was also observed to impact the removal and time to breakthrough. In the absence of regeneration, a microbial community rapidly established itself in ion exchange columns and contributed to the removal of organic material. Biological ion exchange (BIEX) removed more organic material and enabled operation beyond the point when the resin capacity would have otherwise been exhausted using conventional (i.e. in the absence of a microbial community) ion exchange. Furthermore, significantly greater removal of organic matter could be achieved with BIEX than biological activated carbon (BAC) (i.e. 56 ± 7% vs. 15 ± 5%, respectively) when operated at similar loading rates. The results suggest that for some raw waters, BIEX could replace BAC as the technology of choice for the removal of organic material. Copyright © 2018 Elsevier Ltd. All rights reserved.

Breakdown Breakthrough: NREL Finds Easier Ways to Deconstruct Biomass |

Science.gov Websites

soften biomass. Photo by Dennis Schroeder, NREL If there's an easier, more efficient method, science will Dennis Schroeder, NREL The process normally used to deconstruct biomass, called simultaneous in NREL's Biosciences Center. Photo by Dennis Schroeder, NREL New Technology Could Provide Boost to

78 FR 9689 - National Advisory Council for Environmental Policy and Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... recommendations in response to the National Academy of Sciences' report on ``Sustainability and the U.S. EPA.'' NACEPT's second letter on sustainability will address two topics: (1) What strengths EPA can leverage to successfully deploy sustainability practices across the Agency, and (2) what 3-5 year breakthrough objectives...

Moving Toward Trustworthy Systems: R&D Essentials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheldon, Frederick T; Vishik, Claire

2010-01-01

Under the game-change metaphor, strate- gies developed to address hard problems will potentially lead to breakthroughs in many different interrelated cybersecuri- ty areas. For software assurance, a game change should focus on improving resil- iency and hardening new technologies that implement moving-target defenses aInd tailored trustworthy spaces.

POM-assisted electrochemical delignification and bleaching of chemical pulp

Treesearch

Helene Laroche; Mohini Sain; Carl Houtman; Claude Daneault

2001-01-01

A polyoxometalate-catalyzed electrochemical process has shown good selectivity in delignifying pulp. This breakthrough in redox catalysis shows promise for the development of a new environmentally benign technology for pulp bleaching. The electrochemical process, applied with a mildly alkaline electrolyte solution containing trace amounts of a vanadium-based...

Moving Edtech Forward: Upstart School Networks Are Betting on a Breakthrough

ERIC Educational Resources Information Center

Horn, Michael B.

2016-01-01

The digital revolution occurring in schools has focused predominantly on online education in its various forms--including fully online courses, learning management systems, games, and mobile applications--to personalize learning and boost the performance of all students. Companies have been experimenting with technologies for years, yet these…

The Next Computer Revolution.

ERIC Educational Resources Information Center

Peled, Abraham

1987-01-01

Discusses some of the future trends in the use of the computer in our society, suggesting that computing is now entering a new phase in which it will grow exponentially more powerful, flexible, and sophisticated in the next decade. Describes some of the latest breakthroughs in computer hardware and software technology. (TW)

A Learning Management System Enhanced with Internet of Things Applications

ERIC Educational Resources Information Center

Mershad, Khaleel; Wakim, Pilar

2018-01-01

A breakthrough in the development of online learning occurred with the utilization of Learning Management Systems (LMS) as a tool for creating, distributing, tracking, and managing various types of educational and training material. Since the appearance of the first LMS, major technological enhancements transformed this tool into a powerful…

Prediction of a rare chromosomal aberration simultaneously with next generation sequencing-based comprehensive chromosome screening in human preimplantation embryos for recurrent pregnancy loss.

PubMed

Lee, Yi-Xuan; Chen, Chien-Wen; Lin, Yi-Hui; Tzeng, Chii-Ruey; Chen, Chi-Huang

2018-01-01

Preimplantation genetic testing has been used widely in recent years as a part of assisted reproductive technology (ART) owing to the breakthrough development of deoxyribonucleic acid (DNA) sequencing. With the advancement of technology and increased resolution of next generation sequencing (NGS), extensive comprehensive chromosome screening along with small clinically significant deletions and duplications can possibly be performed simultaneously. Here, we present a case of rare chromosomal aberrations: 46,XY,dup(15)(q11.2q13),t(16;18)(q23;p11.2), which resulted in a normally developed adult but abnormal gametes leading to recurrent pregnancy loss (RPL). To our best knowledge, this is the first report of t(16;18) translocation with such a small exchanged segment detected by NGS platform of MiSeq system in simultaneous 24-chromosome aneuploidy screening.

The role of the US in the geopolitics of climate policy and stranded oil reserves

NASA Astrophysics Data System (ADS)

Jaffe, Amy Myers

2016-10-01

Computer-assisted technological innovation and breakthroughs in drilling are revolutionizing the energy landscape, creating greater uncertainty about the future trends for oil use. These new dynamics are prompting major oil producers to reconsider the commercial value of their assets, potentially changing the long-term outlook for oil prices. A shift in investment and production strategy by major oil-producing countries and large multinational companies to pre-empt the risk of stranded assets would have significant implications on energy markets. This Perspective surveys the competitive forces at play that are able to shift the dynamics of the global oil market and discusses their implications for US climate and energy policy. A declining long-term oil price might imply that energy and climate scientists and policymakers should revisit the road map of the optimum policies to promote the transition to lower carbon energy and to defend technology gains already achieved.

Space Station Workstation Technology Workshop Report

NASA Technical Reports Server (NTRS)

Moe, K. L.; Emerson, C. M.; Eike, D. R.; Malone, T. B.

1985-01-01

This report describes the results of a workshop conducted at Goddard Space Flight Center (GSFC) to identify current and anticipated trends in human-computer interface technology that may influence the design or operation of a space station workstation. The workshop was attended by approximately 40 persons from government and academia who were selected for their expertise in some aspect of human-machine interaction research. The focus of the workshop was a 1 1/2 brainstorming/forecasting session in which the attendees were assigned to interdisciplinary working groups and instructed to develop predictions for each of the following technology areas: (1) user interface, (2) resource management, (3) control language, (4) data base systems, (5) automatic software development, (6) communications, (7) training, and (8) simulation. This report is significant in that it provides a unique perspective on workstation design for the space station. This perspective, which is characterized by a major emphasis on user requirements, should be most valuable to Phase B contractors involved in design development of the space station workstation. One of the more compelling results of the workshop is the recognition that no major technological breakthroughs are required to implement the current workstation concept. What is required is the creative application of existing knowledge and technology.

Interpreting tracer breakthrough tailing from different forced-gradient tracer experiment configurations in fractured bedrock

USGS Publications Warehouse

Becker, M.W.; Shapiro, A.M.

2003-01-01

Conceptual and mathematical models are presented that explain tracer breakthrough tailing in the absence of significant matrix diffusion. Model predictions are compared to field results from radially convergent, weak-dipole, and push-pull tracer experiments conducted in a saturated crystalline bedrock. The models are based upon the assumption that flow is highly channelized, that the mass of tracer in a channel is proportional to the cube of the mean channel aperture, and the mean transport time in the channel is related to the square of the mean channel aperture. These models predict the consistent -2 straight line power law slope observed in breakthrough from radially convergent and weak-dipole tracer experiments and the variable straight line power law slope observed in push-pull tracer experiments with varying injection volumes. The power law breakthrough slope is predicted in the absence of matrix diffusion. A comparison of tracer experiments in which the flow field was reversed to those in which it was not indicates that the apparent dispersion in the breakthrough curve is partially reversible. We hypothesize that the observed breakthrough tailing is due to a combination of local hydrodynamic dispersion, which always increases in the direction of fluid velocity, and heterogeneous advection, which is partially reversed when the flow field is reversed. In spite of our attempt to account for heterogeneous advection using a multipath approach, a much smaller estimate of hydrodynamic dispersivity was obtained from push-pull experiments than from radially convergent or weak dipole experiments. These results suggest that although we can explain breakthrough tailing as an advective phenomenon, we cannot ignore the relationship between hydrodynamic dispersion and flow field geometry at this site. The design of the tracer experiment can severely impact the estimation of hydrodynamic dispersion and matrix diffusion in highly heterogeneous geologic media.

Bladder volume at onset of vesicoureteral reflux is an independent risk factor for breakthrough febrile urinary tract infection.

PubMed

Alexander, Siobhan E; Arlen, Angela M; Storm, Douglas W; Kieran, Kathleen; Cooper, Christopher S

2015-04-01

Improved identification of children with vesicoureteral reflux at risk for recurrent febrile urinary tract infection may impact management decisions. We hypothesized that reflux occurring earlier during bladder filling increases the duration of exposure of the kidneys to bacteria, and, therefore, increases the risk of pyelonephritis. Children with vesicoureteral reflux and detailed voiding cystourethrogram data were identified. Bladder volume at onset of reflux was normalized for age. Demographics, reflux grade, laterality, presence/absence of bladder-bowel dysfunction and breakthrough febrile urinary tract infections were assessed. Median followup was 24 months (IQR 12 to 52). A total of 208 girls and 47 boys were analyzed with a mean ± SD age at diagnosis of 3.1 ± 2.6 years. On univariate analysis history of febrile urinary tract infection (HR 2.17, 95% CI 1.33-2.85, p = 0.01), dilating vesicoureteral reflux (HR 1.6, 95% CI 1.05-2.42, p = 0.03) and bladder-bowel dysfunction (HR 1.66, 95% CI 0.99-2.75, p = 0.05) were associated with an increased risk of breakthrough febrile urinary tract infection. Median bladder volume at onset of reflux in children with breakthrough febrile urinary tract infection was significantly less (33.1%) than in those without infection (49.5%, p = 0.003). Reflux onset at 35% predicted bladder capacity or less was associated with a significantly increased risk of breakthrough febrile urinary tract infection on multivariate analysis (HR 1.58, 95% CI 1.05-2.38, p = 0.03). Children with early filling vesicoureteral reflux are at increased risk for breakthrough febrile urinary tract infection independent of reflux grade. Bladder volume at onset of reflux should be recorded during cystograms since it provides additional prognostic information about the risk of pyelonephritis and resolution, and may assist with counseling and clinical decision making. Copyright © 2015 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Robotics in cardiac surgery.

PubMed

Vassiliades, Thomas A

2006-03-01

The current status of surgical telemanipulators in the field of cardiac surgery is best described as a device in search of applications, as its role has not been clearly defined. Basic robotic technological research and development needs to focus on two key areas: (a) developing methods for modeling patient and surgical procedures with the ability to employ that customized information in the successful completion of a minimally invasive operation; and (b) developing novel human machine interactions that can overcome the barriers we currently face in performing surgical tasks using telemanipulators. Significant breakthroughs in these areas will then facilitate the construction and employment of enabling robotic systems, each with its specific clinical application. Copyright 2006 John Wiley & Sons, Ltd.

Transdiscipline and research in health: science, society and decision making

PubMed Central

2015-01-01

Significant advances in science should be given to addressing the needs of society and the historical context of the territories. Although technological developments that began with modernity and the industrial revolution allowed human beings to control the resources of nature to put to your service without limits, it is clear that the crisis of the prevailing development models manifest themselves in many ways but with three common denominators: environmental degradation, social injustice and extreme poverty. Consequently, today should not be possible to think a breakthrough in the development of science without addressing global environmental problems and the deep social injustices that increase at all scales under the gaze, impassively in many occasions, of formal science. PMID:26600628

Transdiscipline and research in health: science, society and decision making.

PubMed

Méndez, Fabián

2015-09-30

Significant advances in science should be given to addressing the needs of society and the historical context of the territories. Although technological developments that began with modernity and the industrial revolution allowed human beings to control the resources of nature to put to your service without limits, it is clear that the crisis of the prevailing development models manifest themselves in many ways but with three common denominators: environmental degradation, social injustice and extreme poverty. Consequently, today should not be possible to think a breakthrough in the development of science without addressing global environmental problems and the deep social injustices that increase at all scales under the gaze, impassively in many occasions, of formal science.

The Wyss institute: A new model for medical technology innovation and translation across the academic‐industrial interface

PubMed Central

Tolikas, Mary; Antoniou, Ayis

2017-01-01

Abstract The Wyss Institute for Biologically Inspired Engineering at Harvard University was formed based on the recognition that breakthrough discoveries cannot change the world if they never leave the laboratory. The Institute's mission is to discover the biological principles that Nature uses to build living things, and to harness these insights to create biologically inspired engineering innovations to advance human health and create a more sustainable world. Since its launch in 2009, the Institute has developed a new model for innovation, collaboration, and technology translation within academia, breaking “silos” to enable collaborations that cross institutional and disciplinary barriers. Institute faculty and staff engage in high‐risk research that leads to transformative breakthroughs. The biological principles uncovered are harnessed to develop new engineering solutions for medicine and healthcare, as well as nonmedical areas, such as energy, architecture, robotics, and manufacturing. These technologies are translated into commercial products and therapies through collaborations with clinical investigators, corporate alliances, and the formation of new start‐ups that are driven by a unique internal business development team including entrepreneurs‐in‐residence with domain‐specific expertise. Here, we describe this novel organizational model that the Institute has developed to change the paradigm of how fundamental discovery, medical technology innovation, and commercial translation are carried out at the academic‐industrial interface. PMID:29313034

Fracture Characterization in Reactive Fluid-Fractured Rock Systems Using Tracer Transport Data

NASA Astrophysics Data System (ADS)

Mukhopadhyay, S.

2014-12-01

Fractures, whether natural or engineered, exert significant controls over resource exploitation from contemporary energy sources including enhanced geothermal systems and unconventional oil and gas reserves. Consequently, fracture characterization, i.e., estimating the permeability, connectivity, and spacing of the fractures is of critical importance for determining the viability of any energy recovery program. While some progress has recently been made towards estimating these critical fracture parameters, significant uncertainties still remain. A review of tracer technology, which has a long history in fracture characterization, reveals that uncertainties exist in the estimated parameters not only because of paucity of scale-specific data but also because of knowledge gaps in the interpretation methods, particularly in interpretation of tracer data in reactive fluid-rock systems. We have recently demonstrated that the transient tracer evolution signatures in reactive fluid-rock systems are significantly different from those in non-reactive systems (Mukhopadhyay et al., 2013, 2014). For example, the tracer breakthrough curves in reactive fluid-fractured rock systems are expected to exhibit a long pseudo-state condition, during which tracer concentration does not change by any appreciable amount with passage of time. Such a pseudo-steady state condition is not observed in a non-reactive system. In this paper, we show that the presence of this pseudo-steady state condition in tracer breakthrough patterns in reactive fluid-rock systems can have important connotations for fracture characterization. We show that the time of onset of the pseudo-steady state condition and the value of tracer concentration in the pseudo-state condition can be used to reliably estimate fracture spacing and fracture-matrix interface areas.

OAST space technology accomplishments FY 1991

NASA Technical Reports Server (NTRS)

1992-01-01

The program consists of a continuum of space research and technology activities ranging from initial research to the full scale test of prototype equipment in space. Activities include work that is performed by in-house staff at the NASA Centers, university researchers supported by NASA funded grants and contracts, and industrial aerospace organizations under contract to NASA. These diverse activities provide advances in technology breakthroughs that may revolutionalize a technical discipline or mission concept. The work is managed and coordinated by OAST through a process that integrates the best available talent and capability in NASA, industry, and universities into a National civil space research and technology program.

Evaluation and Testing of IONSIV IE-911 for the Removal of Cesium-137 from INEEL Tank Waste and Dissolved Calcines

DOE Office of Scientific and Technical Information (OSTI.GOV)

N. R. Mann; T. A. Todd; K. N. Brewer

1999-04-01

Development of waste treatment processes for the remediation of radioactive wastes is currently underway. A number of experiments were performed at the Idaho Nuclear Technology and Environmental Center (INTEC) located at the Idaho National Engineering and Environmental Laboratory (INEEL) with the commercially available sorbent material, IONSIV IE-911, crystalline silicotitanate (CST), manufactured by UOP LLC. The purpose of this work was to evaluate the removal efficiency, sorbent capacity and selectivity of CST for removing Cs-137 from actual and simulated acidic tank waste in addition to dissolved pilot-plant calcine solutions. The scope of this work included batch contact tests performed with non-radioactivemore » dissolved Al and Run-64 pilot plant calcines in addition to simulants representing the average composition of tank waste. Small-scale column tests were performed with actual INEEL tank WM-183 waste, tank waste simulant, dissolved Al and Run-64 pilot plant calcine solutions. Small-scale column experiments using actual WM-183 tank waste resulted in fifty-percent Cs-137 breakthrough at approximately 589 bed volumes. Small-scale column experiments using the tank waste simulant displayed fifty-percent Cs-137 breakthrough at approximately 700 bed volumes. Small-scale column experiments using dissolved Al calcine simulant displayed fifty-percent Cs-137 breakthrough at approximately 795 bed volumes. Column experiments with dissolved Run-64, pilot plant calcine did not reach fifty-percent breakthrough throughout the test.« less

NREL Postdoc Awarded for Work on Breakthrough Solar Technology | News |

Science.gov Websites

widespread, new research must further these trends. One type of materials-halide perovskites-shows promise to group of Joseph M. Luther, working to develop a better understanding of halide perovskite materials fostered," Christians said. "This fellowship gives me the freedom to interact with a wide group

The Economy, Productivity, and Training--A CEO's View. Occasional Paper No. 88.

ERIC Educational Resources Information Center

Frey, Donald N.

The way resources are deployed to educate Americans will affect, as never before, productivity, the economy, and the quality of life. To maintain the present standard of living, Americans will be dependent on a continuous infusion of scientific breakthroughs and productivity-enhancing technology. Periodic upgrading of skills will be a necessity…

Investigating Students' Ideas about Buoyancy and the Influence of Haptic Feedback

ERIC Educational Resources Information Center

Minogue, James; Borland, David

2016-01-01

While haptics (simulated touch) represents a potential breakthrough technology for science teaching and learning, there is relatively little research into its differential impact in the context of teaching and learning. This paper describes the testing of a haptically enhanced simulation (HES) for learning about buoyancy. Despite a lifetime of…

Using Tangible Companions for Enhancing Learning English Conversation

ERIC Educational Resources Information Center

Wang, Yi Hsuan; Young, Shelley S.-C.; Jang, Jyh-Shing Roger

2013-01-01

In this study, the researchers attempted to extend the concept of learning companions from the virtual world to the real physical environment and made a breakthrough in technique development of tangible learning robots. The aim of this study was to explore an innovative way by combining the speech recognition technology with educational robots in…

From the Director - Continuum Magazine | NREL

Science.gov Websites

-changing innovations respond to the marketplace. NREL's depth of foundational science, guided by our world breakthroughs. Q. Why is it important to demonstrate clean energy technologies in a real-world deployment informed decisions while working side-by-side with world-renowned scientists and analysts. Q. How does NREL

Do It Yourself (DIY) Earth Science Collaboratories Using Best Practices and Breakthrough Technologies

NASA Astrophysics Data System (ADS)

Stephan, E.

2017-12-01

The objective of published earth science study data results and literature on the Web should be to provide a means to integrate discoverable science resources through an open collaborative-Web. At the core of any open science collaborative infrastructure is the ability to discover, manage and ultimately use relevant data accessible to the collaboration. Equally important are the relationships between people, applications, services, and publications, which capture critical contextual knowledge that enable their effective use. While contributions of either irreproducible or costly data can be a great asset the inability of users being able to use the data intelligently or make sense of it, makes these investments not usable. An ability to describe ad-hoc discoverable usage methodologies, provide feedback to data producers, and identify and cite data in a systematic way by leveraging existing Web-enabled off the shelf technology is needed. Fortunately many break-through advancements in data publication best practices and government, open source, and commercial investments support consumers who can provide feedback, share experiences, and contribute back to the earth science ecosystem.

Semi-automated lab-on-a-chip for dispensing GA-68 radiotracers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weinberg, Irving

We solved a technical problem that is hindering American progress in molecular medicine, and restricting US citizens from receiving optimal diagnostic care. Specifically, the project deals with a mother/daughter generator of positron-emitting radiotracers (Ge-68/Ga-68). These generator systems are approved in Europe but cannot be used in the USA, because of safety issues related to possible breakthrough of long-lived Ge-68 (mother) atoms. Europeans have demonstrated abilities of Ga-68-labeled radiotracers to image cancer foci with high sensitivity and specificity, and to use such methods to effectively plan therapy.The USA Food and Drug Administration (FDA) and Nuclear Regulatory Commission (NRC) have taken themore » position that every patient administration of Ga-68 should be preceded by an assay demonstrated that Ge-68 breakthrough is within acceptable limits. Breakthrough of parent elements is a sensitive subject at the FDA, as evidenced by the recent recall of Rb-82 generators due to inadvertent administrations of Sr-82. Commercially, there is no acceptable rapid method for assaying breakthrough of Ge-68 prior to each human administration. The gamma emissions of daughter Ga-68 have higher energies than the parent Ge-68, so that the shielding assays typically employed for Mo-99/Tc-99m generators cannot be applied to Ga-68 generators. The half-life of Ga-68 is 68 minutes, so that the standard 10-half-life delay (used to assess breakthrough in Sr-82/Rb-82 generators) cannot be applied to Ga-68 generators. As a result of the aforementioned regulatory requirements, Ga-68 generators are sold in the USA for animal use only.The American clinical community’s inability to utilize Ga-68 generators impairs abilities to treat patients domestically, and puts the USA at a disadvantage in developing exportable products. The proposed DOE project aimed to take advantage of recent technological advances developed for lab-on-a-chip (LOC) applications. Based on our experiences constructing such devices, the proposed microfluidics-based approach could provide cost-effective validation of breakthrough compliance in minutes.« less

Intensification of ammonia removal from waste water in biologically active zeolitic ion exchange columns.

PubMed

Almutairi, Azel; Weatherley, Laurence R

2015-09-01

The use of nitrification filters for the removal of ammonium ion from waste-water is an established technology deployed extensively in municipal water treatment, in industrial water treatment and in applications such as fish farming. The process involves the development of immobilized bacterial films on a solid packing support, which is designed to provide a suitable host for the film, and allow supply of oxygen to promote aerobic action. Removal of ammonia and nitrite is increasingly necessary to meet drinking water and discharge standards being applied in the US, Europe and other places. Ion-exchange techniques are also effective for removal of ammonia (as the ammonium ion) from waste water and have the advantage of fast start-up times compared to biological filtration which in some cases may take several weeks to be fully operational. Here we explore the performance of ion exchange columns in which nitrifying bacteria are cultivated, with the goal of a "combined" process involving simultaneous ion-exchange and nitrification, intensified by in-situ aeration with a novel membrane module. There were three experimental goals. Firstly, ion exchange zeolites were characterized and prepared for comparative column breakthrough studies for ammonia removal. Secondly effective in-situ aeration for promotion of nitrifying bacterial growth was studied using a number of different membranes including polyethersulfone (PES), polypropylene (PP), nylon, and polytetra-fluoroethylene (PTFE). Thirdly the breakthrough performance of ion exchange columns filled with zeolite in the presence of aeration and in the presence of nitrifying bacteria was determined to establish the influence of biomass, and aeration upon breakthrough during ammonium ion uptake. The methodology adopted included screening of two types of the naturally occuring zeolite clinoptilolite for effective ammonia removal in continuous ion-exchange columns. Next, the performance of fixed beds of clinoptilolite in the presence of nitrifying bacteria is compared to that in columns in which only ion exchange is occurring. The aeration performance of each of the chosen membranes was compared experimentally using a newly developed membrane support module which is also described. Comparison of ammonia removal in columns equipped with in-situ aeration using each membrane was undertaken and the breakthrough characteristics determined. The results showed that ammonia removal in the presence of the nitrifiers was significantly intensified. Column operation with membrane aeration showed further enhancement of ammonia removal. The greatest enhancement was observed in the case of the polyethersulfone membrane (PES). It is concluded that combined nitrification and ion-exchange is significantly intensified in packed columns by in-situ aeration using a novel membrane module. There is significant potential for extending the ion-exchange cycle time and thus potential cost reduction. Copyright © 2015 Elsevier Ltd. All rights reserved.

Building political and financial support for science and technology for agriculture.

PubMed

Beachy, Roger N

2014-04-05

The high rate of return on investments in research and development in agriculture, estimated at between 20- and 40-fold, provides a strong rationale for increasing financial support for such research. Furthermore, the urgency to provide sufficient nutrition for a growing population amid growing demands for an expanding bioeconomy, while facing population growth and changing global weather patterns heightens the urgency to expand research and development in this field. Unfortunately, support by governments for research has increased at a fraction of the rate of increases in support of research for health, energy, etc. Although there have been significant increases in investments by the private sector over the past two decades, much of the foundational research that supports private-sector activities is generated in the public sector. To achieve the greatest benefits of breakthroughs in research, it may be necessary to reconfigure research funding and technology transfer mechanisms in order to more rapidly apply discoveries to local needs as well as to global challenges. Some changes will likely require significant organizational, administrative and operational changes in education and research institutions.

Wearable sensors: modalities, challenges, and prospects.

PubMed

Heikenfeld, J; Jajack, A; Rogers, J; Gutruf, P; Tian, L; Pan, T; Li, R; Khine, M; Kim, J; Wang, J; Kim, J

2018-01-16

Wearable sensors have recently seen a large increase in both research and commercialization. However, success in wearable sensors has been a mix of both progress and setbacks. Most of commercial progress has been in smart adaptation of existing mechanical, electrical and optical methods of measuring the body. This adaptation has involved innovations in how to miniaturize sensing technologies, how to make them conformal and flexible, and in the development of companion software that increases the value of the measured data. However, chemical sensing modalities have experienced greater challenges in commercial adoption, especially for non-invasive chemical sensors. There have also been significant challenges in making significant fundamental improvements to existing mechanical, electrical, and optical sensing modalities, especially in improving their specificity of detection. Many of these challenges can be understood by appreciating the body's surface (skin) as more of an information barrier than as an information source. With a deeper understanding of the fundamental challenges faced for wearable sensors and of the state-of-the-art for wearable sensor technology, the roadmap becomes clearer for creating the next generation of innovations and breakthroughs.

Building political and financial support for science and technology for agriculture

PubMed Central

Beachy, Roger N.

2014-01-01

The high rate of return on investments in research and development in agriculture, estimated at between 20- and 40-fold, provides a strong rationale for increasing financial support for such research. Furthermore, the urgency to provide sufficient nutrition for a growing population amid growing demands for an expanding bioeconomy, while facing population growth and changing global weather patterns heightens the urgency to expand research and development in this field. Unfortunately, support by governments for research has increased at a fraction of the rate of increases in support of research for health, energy, etc. Although there have been significant increases in investments by the private sector over the past two decades, much of the foundational research that supports private-sector activities is generated in the public sector. To achieve the greatest benefits of breakthroughs in research, it may be necessary to reconfigure research funding and technology transfer mechanisms in order to more rapidly apply discoveries to local needs as well as to global challenges. Some changes will likely require significant organizational, administrative and operational changes in education and research institutions. PMID:24535386

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bates, Robert; McConnell, Elizabeth

Machining methods across many industries generally require multiple operations to machine and process advanced materials, features with micron precision, and complex shapes. The resulting multiple machining platforms can significantly affect manufacturing cycle time and the precision of the final parts, with a resultant increase in cost and energy consumption. Ultrafast lasers represent a transformative and disruptive technology that removes material with micron precision and in a single step manufacturing process. Such precision results from athermal ablation without modification or damage to the remaining material which is the key differentiator between ultrafast laser technologies and traditional laser technologies or mechanical processes.more » Athermal ablation without modification or damage to the material eliminates post-processing or multiple manufacturing steps. Combined with the appropriate technology to control the motion of the work piece, ultrafast lasers are excellent candidates to provide breakthrough machining capability for difficult-to-machine materials. At the project onset in early 2012, the project team recognized that substantial effort was necessary to improve the application of ultrafast laser and precise motion control technologies (for micromachining difficult-to-machine materials) to further the aggregate throughput and yield improvements over conventional machining methods. The project described in this report advanced these leading-edge technologies thru the development and verification of two platforms: a hybrid enhanced laser chassis and a multi-application testbed.« less

Pharmaceutical technology management--profitable business avenue.

PubMed

Puthli, Shivanand P

2010-01-01

Growing research expenditure, regulatory framework and generic erosion have forced pharmaceutical companies globally to resort to pharmaceutical technology management (PTM). Indeed, the pharmaceutical industry has witnessed the impact of innovative drug delivery and device technologies and their influence on business. PTM has given a new business insight with greater profits and enhancement of product franchise. Promising breakthrough technologies have not been able to reach a commercial platform largely owing to lack of capital at the preliminary stages of the product development program. Intellectual property plays a considerable role in protecting innovative technologies. Joint ventures and strategic alliances also become important for commercializing a new technology. The synergy of PTM with options of in-licensing is expected to infuse newer opportunities to the pharmaceutical business.

Netcast™ Shape Casting Technology: A Technological Breakthrough that Enhances the Cost Effectiveness of Aluminum Forgings

NASA Astrophysics Data System (ADS)

Anderson, Mark; Bruski, Richard; Groszkiewicz, Daniel; Wagstaff, Bob

A new Direct Chill (DC) casting process is introduced to semi-continuous casting where near net shaped ingots are solidified. This process is currently being used at Alcan Engineered Cast Products (ECP) facility in Jonquiere, Canada, sectioned, then forged at Alcoa Automotive, Kentucky Casting Center (KCC). Finished forgings are machined and assembled into the Ford D/EW98 platform as suspension components. A brief description of the process and the implications on the forging process are presented.

Breakthrough: NETL's Simulation-Based Engineering User Center (SBEUC)

ScienceCinema

Guenther, Chris

2018-05-23

The National Energy Technology Laboratory relies on supercomputers to develop many novel ideas that become tomorrow's energy solutions. Supercomputers provide a cost-effective, efficient platform for research and usher technologies into widespread use faster to bring benefits to the nation. In 2013, Secretary of Energy Dr. Ernest Moniz dedicated NETL's new supercomputer, the Simulation Based Engineering User Center, or SBEUC. The SBEUC is dedicated to fossil energy research and is a collaborative tool for all of NETL and our regional university partners.

Silicon ribbon technology assessment 1978-1986 - A computer-assisted analysis using PECAN

NASA Technical Reports Server (NTRS)

Kran, A.

1978-01-01

The paper presents a 1978-1986 economic outlook for silicon ribbon technology based on the capillary action shaping technique. The outlook is presented within the framework of two sets of scenarios, which develop strategy for approaching the 1986 national energy capacity cost objective of $0.50/WE peak. The PECAN (Photovoltaic Energy Conversion Analysis) simulation technique is used to develop a 1986 sheet material price ($50/sq m) which apparently can be attained without further scientific breakthrough.

View from Silicon Valley: Maximizing the Scientific Impact of Global Brain Initiatives through Entrepreneurship.

PubMed

Joshi, Pushkar S; Ghosh, Kunal K

2016-11-02

In this era of technology-driven global neuroscience initiatives, the role of the neurotechnology industry remains woefully ambiguous. Here, we explain why industry is essential to the success of these global initiatives, and how it can maximize the scientific impact of these efforts by (1) scaling and ultimately democratizing access to breakthrough neurotechnologies, and (2) commercializing technologies as part of integrated, end-to-end solutions that accelerate neuroscientific discovery. Copyright © 2016 Elsevier Inc. All rights reserved.

Breakthrough: NETL's Simulation-Based Engineering User Center (SBEUC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guenther, Chris

The National Energy Technology Laboratory relies on supercomputers to develop many novel ideas that become tomorrow's energy solutions. Supercomputers provide a cost-effective, efficient platform for research and usher technologies into widespread use faster to bring benefits to the nation. In 2013, Secretary of Energy Dr. Ernest Moniz dedicated NETL's new supercomputer, the Simulation Based Engineering User Center, or SBEUC. The SBEUC is dedicated to fossil energy research and is a collaborative tool for all of NETL and our regional university partners.

Long Fuse, Big Bang: Thomas Edison, Electricity, and the Locus of Innovation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hargadon, Andrew

2012-10-22

Calls for breakthroughs in science and technology have never been louder, and yet the demand for innovation is made more challenging by public and political misconceptions surrounding where, when, and how it happens. Professor Andrew Hargadon uses historical research to advance our current understanding of the innovation process. He discussed the social and technical context in which electric light, and the modern electric power infrastructure, were born and considers its implications for managing innovation in science and technology today.

Impact of composites on future transport aircraft

NASA Technical Reports Server (NTRS)

Kinder, Robert H.

1993-01-01

In the current environment, new technology must be cost-effective in addition to improving operability. Various approaches have been used to determine the 'hurdle' or 'breakthrough' return that must be achieved to gain customer commitment for a new product or aircraft, or in this case, a new application of the technology. These approaches include return-on-investment, payback period, and addition to net worth. An easily understood figure-of-merit and one used by our airline customers is improvement in direct operating cost per seat-mile. Any new technology must buy its way onto the aircraft through reduction in direct operating cost (DOC).

Photovoltaics as a terrestrial energy source. Volume 1: An introduction

NASA Technical Reports Server (NTRS)

Smith, J. L.

1980-01-01

Photovoltaic (PV) systems were examined their potential for terrestrial application and future development. Photovoltaic technology, existing and potential photovoltaic applications, and the National Photovoltaics Program are reviewed. The competitive environment for this electrical source, affected by the presence or absence of utility supplied power is evaluated in term of systems prices. The roles of technological breakthroughs, directed research and technology development, learning curves, and commercial demonstrations in the National Program are discussed. The potential for photovoltaics to displace oil consumption is examined, as are the potential benefits of employing PV in either central-station or non-utility owned, small, distributed systems.

An evaluation of total disintegration time for three different doses of sublingual fentanyl tablets in patients with breakthrough pain.

PubMed

Nalamachu, Srinivas

2013-12-01

Breakthrough pain is common among patients with cancer and presents challenges to effective pain management. Breakthrough pain is characterized by rapid onset, severe intensity, and duration typically lasting <1 h. Thus, optimal relief from breakthrough pain is best attained by administering analgesics with dissolution times and bioavailabilities that closely match the onset and duration of breakthrough pain. The objective of this study was to assess complete disintegration time of three different doses of sublingual fentanyl tablets in opioid-tolerant patients. This was a single-center, non-randomized, open-label study. Opioid-tolerant adult patients (N = 30) with chronic pain were assigned to one of three dose groups and self-administered a single 100, 200, or 300 μg sublingual fentanyl tablet (Abstral(®), Galena Biopharma, Portland, OR, USA). Time to complete disintegration was measured by each patient with a stopwatch and independently verified by study personnel. Disintegration time (mean ± SD) for sublingual fentanyl tablets (all doses) was 88.2 ± 55.1 s. Mean disintegration times tended to be slightly longer for the 200 μg (96.7 ± 57.9 s) and 300 μg doses (98.6 ± 64.8 s) compared to the 100 μg dose (69.5 ± 40.5 s). Differences were not statistically significant. Disintegration time was not significantly different between men and women and was not affected by age. Sublingual fentanyl tablets dissolved rapidly (average time <2 min) in all patients, with the higher doses taking slightly more time to dissolve.

N2 and CO2 capillary breakthrough experiments on Opalinus Clay

NASA Astrophysics Data System (ADS)

Amann, Alexandra; Busch, Andreas; Krooss, Bernhard M.

2013-04-01

The aim of this project was to identify the critical capillary pressures on the drainage and the imbibition path for clay-rich rocks, at a burial depth of 1500 m (30 MPa confining pressure, 45°C). The experiments were performed on fully water-saturated sample plugs of 38 mm diameter and 5 to 20 mm length. The capillary breakthrough pressure was determined by step-wise increase of the differential pressure (drainage), the capillary snap-off pressure was determined from the final pressure difference at the end of a spontaneous imbibition phase. The confining pressure was kept constant throughout the experiment, which resulted in a continuous change of effective stress. The measurements were performed in a closed system and the pressure response was interpreted in terms of different flow mechanisms (diffusion-controlled vs. viscous flow). In total, four breakthrough experiments with N2 and five experiments with CO2 were conducted. Because of very low flow rates and high critical capillary pressures the experiments took rather long. In some cases the experiments were allowed to run for half a year (drainage experiments). Substantial differences were observed between gas breakthrough (drainage) and snap-off (imbibition) pressures. As expected, breakthrough pressures were always higher than the snap-off pressures. For three samples a pbreakthrough/psnap-off ratio of 1.6 to 1.9 was observed, for one sample a ratio of 4. A clear permeability-capillary pressure relationship could not be identified. Based on (omnidirectional) Hg-injection porosimetry results, and assuming perfectly water wet mineral surfaces, gas breakthrough pressures were predicted to occur at approximately 16 MPa for N2 and 5.7 MPa for CO2. The gas breakthrough experiments, however, produced different results. Even though a relatively homogeneous sample set was chosen, with permeability coefficients ranging between 1E-21 and 6E-21 m², the critical capillary breakthrough pressures for nitrogen ranged between 3.4 and 12.3 MPa and snap-off pressures from 0.5 to 6.4 MPa. The CO2 experiments yielded breakthrough pressures of 14.0 to 17.5 MPa and snap-off pressures of 3.5 to 10 MPa. No significant changes in single-phase water permeability coefficients before and after the gas breakthrough experiments were observed. In our contribution we will discuss the following points: 1. Gas fluxes occurring during gas breakthrough experiments may be extremely low. Therefore an unambigous identification of gas breakthrough is not always possible. Besides viscous or diffusive transport, dissolution of CO2 in the pore water may affect the observed pressure changes in the upstream and downstream compartments. All of these processes occur simultaneously and can only be partly discriminated. Gas fluxes detected during the diffusion-controlled flow regimes result in nominal effective gas permeability coefficients as low as 6E-25 m² to 7E-24m². 2. The application of purely capillary-controlled flow models may not be justified. o Gas breakthrough is controlled by effective stress, i.e. the opening of pores or small fissures. o Assumptions about wettability (completely water-wet mineral surfaces) may be incorrect.

Effect of temperature on the breakthrough of a charcoal tube during vinyl chloride monomer sampling.

PubMed

Roh, J; Park, Y J; Kim, C N; Lim, N G; Lee, S H; Song, J S; Won, J U; Talaska, G

2000-01-01

This study evaluated the effects of temperature on breakthrough of two standard collection media at various concentrations during vinyl chloride monomer (VCM) sampling. The National Institute for Occupational Safety and Health (NIOSH) and Occupational Safety and Health Administration (OSHA) methods were evaluated. To determine whether breakthrough of VCM would occur at the extremes of exposure and temperature that might be encountered in some workplaces, air samples containing 4 ppm (10.24 mg/m3), 8 ppm (20.45 mg/m3), 16 ppm (40.98 mg/m3), and 32 ppm (81.80 mg/m3) of VCM were collected at temperatures of 4, 22, and 40 degrees C. Five liters of air was sampled at the rate of 0.05 L/min for 100 min using the activated charcoal tube recommended by NIOSH. A second tube was added to the sampling train to collect any VCM that might not have been absorbed in the first tube. To collect VCM air samples by the OSHA method, two carbon molecular sieve tubes were connected serially and 3 L of air was sampled at the rate of 0.05 L/min for 60 min. A gas chromatograph with a flame ionization detector and ultra 2 capillary column was used to analyze VCM. Significant breakthrough was found when sampling at higher temperatures with the NIOSH method. No breakthrough was found when samples were collected using the OSHA media at different temperatures and concentrations. Therefore, under hot ambient conditions (>22 degrees C), the possibility of breakthrough should be considered when sampling VCM by the NIOSH method.

Caspofungin versus fluconazole as prophylaxis of invasive fungal infection in high-risk liver transplantation recipients: A propensity score analysis.

PubMed

Fortún, Jesús; Muriel, Alfonso; Martín-Dávila, Pilar; Montejo, Miguel; Len, Oscar; Torre-Cisneros, Julian; Carratalá, Jordi; Muñoz, Patricia; Fariñas, Carmen; Moreno, Asunción; Fresco, Gema; Goikoetxea, Josune; Gavaldá, Joan; Pozo, Juan Carlos; Bodro, Marta; Vena, Antonio; Casafont, Fernando; Cervera, Carlos; Silva, José Tiago; Aguado, José M

2016-04-01

Targeted prophylaxis has proven to be an efficient strategy in liver transplantation recipients (LTRs). The aim of this study was to compare the effectiveness and safety of caspofungin with that of fluconazole in high-risk (HR) LTRs. Caspofungin and fluconazole were compared in a multicenter, retrospective, cohort study in HR-LTRs in Spain. Outcomes were assessed at 180 days after transplantation. A propensity score approach was applied. During the study period (2005-2012), we analyzed 195 HR-LTRs from 9 hospitals. By type of prophylaxis, 97 patients received caspofungin and 98 received fluconazole. Of a total of 17 (8.7%) global invasive fungal infections (IFIs), breakthrough IFIs accounted for 11 (5.6%) and invasive aspergillosis (IA) accounted for 6 (3.1%). By univariate analysis, no differences were observed in the prevention of global IFIs. However, caspofungin was associated with a significant reduction in the rate of breakthrough IFIs (2.1% versus 9.2%, P = 0.04). In patients requiring dialysis (n = 62), caspofungin significantly reduced the frequency of breakthrough IFIs (P = 0.03). The propensity score analysis confirmed a significant reduction in the frequency of IA in patients receiving caspofungin (absolute risk reduction, 0.06; 95% confidence interval [CI], 0.001-0.11; P = 0.044). Linear regression analysis revealed a significant decrease in blood alanine aminotransferase levels and a significant increase in bilirubin levels after administration of caspofungin. Caspofungin and fluconazole have similar efficacy for the prevention of global IFIs in HR-LTRs in this observational, multicenter cohort study. However, caspofungin was associated with a significant reduction of breakthrough IFIs and, after adjusting for confounders, caspofungin was associated with a lower rate of IA. This benefit is probably more favorable in patients on dialysis. Caspofungin is safe in HR-LTRs, although bilirubin levels may be increased. © 2015 American Association for the Study of Liver Diseases.

Space Manufacturing: The Next Great Challenge

NASA Technical Reports Server (NTRS)

Whitaker, Ann F.; Curreri, Peter; Sharpe, Jonathan B.; Colberg, Wendell R.; Vickers, John H.

1998-01-01

Space manufacturing encompasses the research, development and manufacture necessary for the production of any product to be used in near zero gravity, and the production of spacecraft required for transporting research or production devices to space. Manufacturing for space, and manufacturing in space will require significant breakthroughs in materials and manufacturing technology, as well as in equipment designs. This report reviews some of the current initiatives in achieving space manufacturing. The first initiative deals with materials processing in space, e.g., processing non-terrestrial and terrestrial materials, especially metals. Some of the ramifications of the United States Microgravity Payloads fourth (USMP-4) mission are discussed. Some problems in non-terrestrial materials processing are mentioned. The second initiative is structures processing in space. In order to accomplish this, the International Space Welding Experiment was designed to demonstrate welding technology in near-zero gravity. The third initiative is advancements in earth-based manufacturing technologies necessary to achieve low cost access to space. The advancements discussed include development of lightweight material having high specific strength, and automated fabrication and manufacturing methods for these materials.

Technology Assessment of Laser-Assisted Materials Processing in Space

NASA Technical Reports Server (NTRS)

Nagarathnam, Karthik; Taminger, Karen M. B.

2001-01-01

Lasers are useful for performing operations such as joining, machining, built-up freeform fabrication, shock processing, and surface treatments. These attributes are attractive for the supportability of longer-term missions in space due to the multi-functionality of a single tool and the variety of materials that can be processed. However, current laser technology also has drawbacks for space-based applications, specifically size, power efficiency, lack of robustness, and problems processing highly reflective materials. A review of recent laser developments will be used to show how these issues may be reduced and indicate where further improvement is necessary to realize a laser-based materials processing capability in space. The broad utility of laser beams in synthesizing various classes of engineering materials will be illustrated using state-of-the art processing maps for select lightweight alloys typically found on spacecraft. With the advent of recent breakthroughs in diode-pumped solid-state lasers and fiber optic technologies, the potential to perform multiple processing techniques is increasing significantly. Lasers with suitable wavelengths and beam properties have tremendous potential for supporting future space missions to the moon, Mars and beyond.

A hybrid absorption–adsorption method to efficiently capture carbon

PubMed Central

Liu, Huang; Liu, Bei; Lin, Li-Chiang; Chen, Guangjin; Wu, Yuqing; Wang, Jin; Gao, Xueteng; Lv, Yining; Pan, Yong; Zhang, Xiaoxin; Zhang, Xianren; Yang, Lanying; Sun, Changyu; Smit, Berend; Wang, Wenchuan

2014-01-01

Removal of carbon dioxide is an essential step in many energy-related processes. Here we report a novel slurry concept that combines specific advantages of metal-organic frameworks, ion liquids, amines and membranes by suspending zeolitic imidazolate framework-8 in glycol-2-methylimidazole solution. We show that this approach may give a more efficient technology to capture carbon dioxide compared to conventional technologies. The carbon dioxide sorption capacity of our slurry reaches 1.25 mol l−1 at 1 bar and the selectivity of carbon dioxide/hydrogen, carbon dioxide/nitrogen and carbon dioxide/methane achieves 951, 394 and 144, respectively. We demonstrate that the slurry can efficiently remove carbon dioxide from gas mixtures at normal pressure/temperature through breakthrough experiments. Most importantly, the sorption enthalpy is only −29 kJ mol−1, indicating that significantly less energy is required for sorbent regeneration. In addition, from a technological point of view, unlike solid adsorbents slurries can flow and be pumped. This allows us to use a continuous separation process with heat integration. PMID:25296559

Current and future molecular approaches in the diagnosis of cystic fibrosis.

PubMed

Bergougnoux, Anne; Taulan-Cadars, Magali; Claustres, Mireille; Raynal, Caroline

2018-05-01

Cystic Fibrosis is among the first diseases to have general population genetic screening tests and one of the most common indications of prenatal and preimplantation genetic diagnosis for single gene disorders. During the past twenty years, thanks to the evolution of diagnostic techniques, our knowledge of CFTR genetics and pathophysiological mechanisms involved in cystic fibrosis has significantly improved. Areas covered: Sanger sequencing and quantitative methods greatly contributed to the identification of more than 2,000 sequence variations reported worldwide in the CFTR gene. We are now entering a new technological age with the generalization of high throughput approaches such as Next Generation Sequencing and Droplet Digital PCR technologies in diagnostics laboratories. These powerful technologies open up new perspectives for scanning the entire CFTR locus, exploring modifier factors that possibly influence the clinical evolution of patients, and for preimplantation and prenatal diagnosis. Expert commentary: Such breakthroughs would, however, require powerful bioinformatics tools and relevant functional tests of variants for analysis and interpretation of the resulting data. Ultimately, an optimal use of all those resources may improve patient care and therapeutic decision-making.

Hard Sphere Simulation by Event-Driven Molecular Dynamics: Breakthrough, Numerical Difficulty, and Overcoming the issues

NASA Astrophysics Data System (ADS)

Isobe, Masaharu

Hard sphere/disk systems are among the simplest models and have been used to address numerous fundamental problems in the field of statistical physics. The pioneering numerical works on the solid-fluid phase transition based on Monte Carlo (MC) and molecular dynamics (MD) methods published in 1957 represent historical milestones, which have had a significant influence on the development of computer algorithms and novel tools to obtain physical insights. This chapter addresses the works of Alder's breakthrough regarding hard sphere/disk simulation: (i) event-driven molecular dynamics, (ii) long-time tail, (iii) molasses tail, and (iv) two-dimensional melting/crystallization. From a numerical viewpoint, there are serious issues that must be overcome for further breakthrough. Here, we present a brief review of recent progress in this area.

Benchmarks for detecting 'breakthroughs' in clinical trials: empirical assessment of the probability of large treatment effects using kernel density estimation.

PubMed

Miladinovic, Branko; Kumar, Ambuj; Mhaskar, Rahul; Djulbegovic, Benjamin

2014-10-21

To understand how often 'breakthroughs,' that is, treatments that significantly improve health outcomes, can be developed. We applied weighted adaptive kernel density estimation to construct the probability density function for observed treatment effects from five publicly funded cohorts and one privately funded group. 820 trials involving 1064 comparisons and enrolling 331,004 patients were conducted by five publicly funded cooperative groups. 40 cancer trials involving 50 comparisons and enrolling a total of 19,889 patients were conducted by GlaxoSmithKline. We calculated that the probability of detecting treatment with large effects is 10% (5-25%), and that the probability of detecting treatment with very large treatment effects is 2% (0.3-10%). Researchers themselves judged that they discovered a new, breakthrough intervention in 16% of trials. We propose these figures as the benchmarks against which future development of 'breakthrough' treatments should be measured. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Development Of ABEC Column For Separation Of Tc-99 From Northstar Dissolved Target Solution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stepinski, Dominique C.; Bennett, Megan E.; Naik, Seema R.

Batch and column breakthrough experiments were performed to determine isotherms and mass-transfer parameters for adsorption of Tc on aqueous biphasic extraction chromatographic (ABEC) sorbent in two solutions: 200 g/L Mo, 5.1 M K +, 1 M OH -, and 0.1 M NO 3 - (Solution A) and 200 g/L Mo, 9.3 M K +, 5 M OH -, and 0.1 M NO 3 - (Solution B). Good agreement was found between the isotherm values obtained by batch and column breakthrough studies for both Solutions A and B. Potassium-pertechnetate intra-particle diffusivity on ABEC resin was estimated by VERSE simulations, and goodmore » agreement was found among a series of column-breakthrough experiments at varying flow velocities, column sizes, and technetium concentrations. However, testing of 10 cc cartridges provided by NorthStar with Solutions A and B did not give satisfactory results, as significant Tc breakthrough was observed and ABEC cartridge performance varied widely among experiments. These different experimental results are believed to be due to inconsistent preparation of the ABEC resin prior to packing and/or inconsistent packing.« less

What It Takes to Be a Superior College President

ERIC Educational Resources Information Center

Friedman, Hershey Harry; Kass-Shraibman, Frimette

2017-01-01

Purpose: The purpose of this study is to examine established leadership paradigms in the context of institutions of higher education. The old ways of running a college, which might have worked several decades ago, no longer work in the age of flux characterized by super-fast breakthroughs due to technology and the internet. Organizational change…

Web Solutions Inspire Cloud Computing Software

NASA Technical Reports Server (NTRS)

2013-01-01

An effort at Ames Research Center to standardize NASA websites unexpectedly led to a breakthrough in open source cloud computing technology. With the help of Rackspace Inc. of San Antonio, Texas, the resulting product, OpenStack, has spurred the growth of an entire industry that is already employing hundreds of people and generating hundreds of millions in revenue.

Applications of Digital Micromirror Devices to Astronomical Instrumentation

NASA Astrophysics Data System (ADS)

Robberto, M.

MEMS devices are among the major technological breakthroughs of the last two decades. Besides finding widespread use in high-tech and consumer market electronics, MEMS enable new types of astronomical instruments. I concentrate on Digital Micromirror Devices, which have been already adopted in astronomy and can enable scientific investigations that would otherwise remain beyond our technical capabilities.

The JPL Direct Methanol Liquid-feed PEM Fuel Cell

NASA Technical Reports Server (NTRS)

Halpert, G.; Surampudi, S.

1994-01-01

Recently, there has been a breakthrough in fuel cell technology in the Energy Storage Systems Group at the Jet Propulsion Laboratory with the develpment of a direct methanol, liquid-feed, solid polymer electrolyte membrane (PEM) fuel cell... The methanol liquid-feed, solid polymer electrolyte (PEM) design has numerous system level advantages over the gas-feed design. These include:...

Chronic hepatitis C virus patients with breakthroughs during interferon treatment can successfully be retreated with consensus interferon. The Consensus Interferon Study Group.

PubMed

Heathcote, E J; James, S; Mullen, K D; Hauser, S C; Rosenblate, H; Albert, D G

1999-08-01

Patients with chronic hepatitis C who have not had a sustained hepatitis C virus (HCV)-RNA response or serum alanine transaminase (ALT) response to a 6-month course of interferon (IFN) may respond to higher dose retreatment with consensus interferon (CIFN). Some nonresponders to initial IFN treatment have a transient response defined as undetectable HCV RNA or normalization of ALT during treatment, but subsequently have a "breakthrough" while still on treatment. The aim of this study was to determine if nonresponders who had breakthroughs responded differently to CIFN retreatment than nonresponders without breakthroughs using data from a large, multicenter trial. ALT and HCV RNA were monitored frequently during initial IFN therapy (either 9 mcg CIFN or 3 MU IFN-alpha2b 3 times per week). HCV-RNA breakthroughs were observed in 86 of 467 (18%) of all treated patients, and ALT breakthroughs were observed in 90 of 467 (19%) of all treated patients. There was no association between breakthroughs and the presence of either binding or neutralizing anti-IFN antibodies. When the patients who were nonresponders to initial IFN treatment were retreated with CIFN (15 mcg) for 12 months, 27% of those with viral breakthroughs had a sustained viral response compared with 8% in prior nonresponders without breakthroughs (P =.102). Sustained ALT responses were observed in 39% with breakthroughs compared with 10% in those without breakthroughs (P =.014). The data suggest that prior nonresponders with breakthroughs have a greater chance of responding to retreatment than do nonresponders without breakthroughs. However, most breakthrough patients would be missed unless repeated HCV-RNA testing were conducted during therapy.

Lightweight thermal energy recovery system based on shape memory alloys: a DOE ARPA-E initiative

NASA Astrophysics Data System (ADS)

Browne, Alan L.; Keefe, Andrew C.; Alexander, Paul W.; Mankame, Nilesh; Usoro, Patrick; Johnson, Nancy L.; Aase, Jan; Sarosi, Peter; McKnight, Geoffrey P.; Herrera, Guillermo; Churchill, Christopher; Shaw, John; Brown, Jeff

2012-04-01

Over 60% of energy that is generated is lost as waste heat with close to 90% of this waste heat being classified as low grade being at temperatures less than 200°C. Many technologies such as thermoelectrics have been proposed as means for harvesting this lost thermal energy. Among them, that of SMA (shape memory alloy) heat engines appears to be a strong candidate for converting this low grade thermal output to useful mechanical work. Unfortunately, though proposed initially in the late 60's and the subject of significant development work in the 70's, significant technical roadblocks have existed preventing this technology from moving from a scientific curiosity to a practical reality. This paper/presentation provides an overview of the work performed on SMA heat engines under the US DOE (Department of Energy) ARPA-E (Advanced Research Projects Agency - Energy) initiative. It begins with a review of the previous art, covers the identified technical roadblocks to past advancement, presents the solution path taken to remove these roadblocks, and describes significant breakthroughs during the project. The presentation concludes with details of the functioning prototypes developed, which, being able to operate in air as well as fluids, dramatically expand the operational envelop and make significant strides towards the ultimate goal of commercial viability.

Technology Area Roadmap for In Space Propulsion Technologies

NASA Technical Reports Server (NTRS)

Johnson, Les; Meyer, Mike; Coote, David; Goebel, Dan; Palaszewski, Bryan; White, Sonny

2010-01-01

This slide presentation reviews the technology area (TA) roadmap to develop propulsion technologies that will be used to enable further exploration of the solar system, and beyond. It is hoped that development of the technologies within this TA will result in technical solutions that will improve thrust levels, specific impulse, power, specific mass, volume, system mass, system complexity, operational complexity, commonality with other spacecraft systems, manufacturability and durability. Some of the propulsion technologies that are reviewed include: chemical and non-chemical propulsion, and advanced propulsion (i.e., those with a Technology Readiness level of less than 3). Examples of these advanced technologies include: Beamed Energy, Electric Sail, Fusion, High Energy Density Materials, Antimatter, Advanced Fission and Breakthrough propulsion technologies. Timeframes for development of some of these propulsion technologies are reviewed, and top technical challenges are reviewed. This roadmap describes a portfolio of in-space propulsion technologies that can meet future space science and exploration needs.

Big data in biomedicine.

PubMed

Costa, Fabricio F

2014-04-01

The increasing availability and growth rate of biomedical information, also known as 'big data', provides an opportunity for future personalized medicine programs that will significantly improve patient care. Recent advances in information technology (IT) applied to biomedicine are changing the landscape of privacy and personal information, with patients getting more control of their health information. Conceivably, big data analytics is already impacting health decisions and patient care; however, specific challenges need to be addressed to integrate current discoveries into medical practice. In this article, I will discuss the major breakthroughs achieved in combining omics and clinical health data in terms of their application to personalized medicine. I will also review the challenges associated with using big data in biomedicine and translational science. Copyright © 2013 Elsevier Ltd. All rights reserved.

Breakthrough in chloroplast genetic engineering of agronomically important crops

PubMed Central

Daniell, Henry; Kumar, Shashi; Dufourmantel, Nathalie

2012-01-01

Chloroplast genetic engineering offers several unique advantages, including high-level transgene expression, multi-gene engineering in a single transformation event and transgene containment by maternal inheritance, as well as a lack of gene silencing, position and pleiotropic effects and undesirable foreign DNA. More than 40 transgenes have been stably integrated and expressed using the tobacco chloroplast genome to confer desired agronomic traits or express high levels of vaccine antigens and biopharmaceuticals. Despite such significant progress, this technology has not been extended to major crops. However, highly efficient soybean, carrot and cotton plastid transformation has recently been accomplished through somatic embryogenesis using species-specific chloroplast vectors. This review focuses on recent exciting developments in this field and offers directions for further research and development. PMID:15866001

USCA, a codeveloped piece of technology, is presented to Bridges, KSC Director, by Saputo, L-3 Commu

NASA Technical Reports Server (NTRS)

1997-01-01

William Saputo, L-3 Communications, presents a new piece of technology, developed through a National Aeronautics and Space Administration (NASA) partnership with industry, to Kennedy Space Center (KSC) Director Roy Bridges, Jr. (second from left). The piece of technology being presented, the Universal Signal Conditioning Amplifier (USCA), is a key component of the codeveloped Automated Data Acquisition System (ADAS) that measures temperature, pressure and vibration at KSC's launch pads. The breakthrough technology is expected to reduce sensor setup and configuration times from hours to seconds. KSC teamed up with Florida's Technological Research and Development Authority and manufacturer L-3 Communications to produce a system that would benefit the aerospace industry and other commercial markets.

The implication of telehealthcare in COPD management of China.

PubMed

Lao, Xiangda; Zhang, Jing; Bai, Chunxue

2013-10-01

Chronic obstructive pulmonary disease (COPD) is a very common disease all around the world and has become an increasing public health concern to the Chinese medical community. In the past decades, telehealthcare technology has become a good way to manage COPD but current evidence makes it hard to determine the effectiveness of this technology. Internet of things (Iot) is a recent breakthrough in communication technology, which links the virtual world to the real world through connection between sensors and working devices. It relates people and items in any ways so that data collection and management become more flexible. Our review concentrates on the effectiveness and potential application of telehealthcare in COPD management and how IoT technology may stimulate COPD healthcare delivery through telehealthcare technology.

Granular activated carbon adsorption of MIB in the presence of dissolved organic matter.

PubMed

Summers, R Scott; Kim, Soo Myung; Shimabuku, Kyle; Chae, Seon-Ha; Corwin, Christopher J

2013-06-15

Based on the results of over twenty laboratory granular activated carbon (GAC) column runs, models were developed and utilized for the prediction of 2-methylisoborneol (MIB) breakthrough behavior at parts per trillion levels and verified with pilot-scale data. The influent MIB concentration was found not to impact the concentration normalized breakthrough. Increasing influent background dissolved organic matter (DOM) concentration was found to systematically decrease the GAC adsorption capacity for MIB. A series of empirical models were developed that related the throughput in bed volumes for a range of MIB breakthrough targets to the influent DOM concentration. The proportional diffusivity (PD) designed rapid small-scale column test (RSSCT) could be directly used to scale-up MIB breakthrough performance below 15% breakthrough. The empirical model to predict the throughput to 50% breakthrough based on the influent DOM concentration served as input to the pore diffusion model (PDM) and well-predicted the MIB breakthrough performance below a 50% breakthrough. The PDM predictions of throughput to 10% breakthrough well simulated the PD-RSSCT and pilot-scale 10% MIB breakthrough. Copyright © 2013 Elsevier Ltd. All rights reserved.

KSC-97PC1280

NASA Image and Video Library

1997-08-22

KENNEDY SPACE CENTER, FLA. -- William Saputo, L-3 Communications, presents a new piece of technology, developed through a National Aeronautics and Space Administration (NASA) partnership with industry, to Kennedy Space Center (KSC) Director Roy Bridges, Jr. (second from left). The piece of technology being presented, the Universal Signal Conditioning Amplifier (USCA), is a key component of the codeveloped Automated Data Acquisition System (ADAS) that measures temperature, pressure and vibration at KSC's launch pads. The breakthrough technology is expected to reduce sensor setup and configuration times from hours to seconds. KSC teamed up with Florida's Technological Research and Development Authority and manufacturer L-3 Communications to produce a system that would benefit the aerospace industry and other commercial markets

Distal Ureteral Diameter Ratio is Predictive of Breakthrough Febrile Urinary Tract Infection.

PubMed

Arlen, Angela M; Leong, Traci; Guidos, P Joseph; Alexander, Siobhan E; Cooper, Christopher S

2017-12-01

Distal ureteral diameter ratio is an objective measure that is prognostic of spontaneous resolution of vesicoureteral reflux. Along with likelihood of resolution, improved identification of children at risk for recurrent febrile urinary tract infections may impact management decisions. We evaluated the usefulness of ureteral diameter ratio as a predictive factor for breakthrough febrile urinary tract infections. Children with primary vesicoureteral reflux and detailed voiding cystourethrogram were identified. Ureteral diameter ratio was computed by measuring largest ureteral diameter within the pelvis and dividing by the distance between L1 and L3 vertebral bodies. Demographics, vesicoureteral reflux grade, laterality, presence/absence of bladder-bowel dysfunction, and ureteral diameter ratio were tested in univariate and multivariable analyses. Primary outcome was breakthrough febrile urinary tract infections. We analyzed 112 girls and 28 boys with a mean ± SD age of 2.5 ± 2.3 years at diagnosis. Vesicoureteral reflux was grade 1 to 2 in 64 patients (45.7%), grade 3 in 50 (35.7%), grade 4 in 16 (11.4%) and grade 5 in 10 (7.2%). Mean ± SD followup was 3.2 ± 2.7 years. A total of 40 children (28.6%) experienced breakthrough febrile urinary tract infections. Ureteral diameter ratio was significantly greater in children with (0.36) vs without (0.25) breakthrough febrile infections (p = 0.004). Controlling for vesicoureteral reflux grade, every 0.1 U increase in ureteral diameter ratio resulted in 1.7 times increased odds of breakthrough infection (95% CI 1.24 to 2.26, p <0.0001). Children with increased distal ureteral diameter ratio are at greater risk for breakthrough febrile urinary tract infections independent of reflux grade. Ureteral diameter ratio provides valuable prognostic information about risk of recurrent pyelonephritis and may assist with clinical decision-making. Copyright © 2017 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Speech as a breakthrough signaling resource in the cognitive evolution of biological complex adaptive systems.

PubMed

Mattei, Tobias A

2014-12-01

In self-adapting dynamical systems, a significant improvement in the signaling flow among agents constitutes one of the most powerful triggering events for the emergence of new complex behaviors. Ackermann and colleagues' comprehensive phylogenetic analysis of the brain structures involved in acoustic communication provides further evidence of the essential role which speech, as a breakthrough signaling resource, has played in the evolutionary development of human cognition viewed from the standpoint of complex adaptive system analysis.

Challenges and opportunities of power systems from smart homes to super-grids.

PubMed

Kuhn, Philipp; Huber, Matthias; Dorfner, Johannes; Hamacher, Thomas

2016-01-01

The world's power systems are facing a structural change including liberalization of markets and integration of renewable energy sources. This paper describes the challenges that lie ahead in this process and points out avenues for overcoming different problems at different scopes, ranging from individual homes to international super-grids. We apply energy system models at those different scopes and find a trade-off between technical and social complexity. Small-scale systems would require technological breakthroughs, especially for storage, but individual agents can and do already start to build and operate such systems. In contrast, large-scale systems could potentially be more efficient from a techno-economic point of view. However, new political frameworks are required that enable long-term cooperation among sovereign entities through mutual trust. Which scope first achieves its breakthrough is not clear yet.

Nitrous oxide/oxygen mixture for analgesia in adult cancer patients with breakthrough pain: A randomized, double-blind controlled trial.

PubMed

Liu, Q; Gao, L-L; Dai, Y-L; Li, Y-X; Wang, Y; Bai, C-F; Mu, G-X; Chai, X-M; Han, W-J; Zhou, L-J; Zhang, Y-J; Tang, L; Liu, J; Yu, J-Q

2018-03-01

The aim of this study was to assess the efficacy of a fixed nitrous oxide/oxygen mixture for the management of breakthrough cancer pain. A double-blind, placebo-controlled, randomized clinical trial was undertaken in the Medical ward of Tumor Hospital of General Hospital of Ningxia Medical University. 240 cancer patients with breakthrough pain were recruited and randomly received a standard pain treatment (morphine sulphate immediate release) plus a pre-prepared nitrous oxide/oxygen mixture, or the standard pain treatment plus oxygen. The primary endpoint measure was the numerical rating scale (NRS) score measured at baseline, 5 and 15 min after the beginning of treatment, and at 5 min post treatment. In all, analysis of pain score (NRS) at 5 min after the beginning of treatment shown a significant decrease in nitrous oxide/oxygen mixture treated patients with 2.8 ± 1.3 versus 5.5 ± 1.2 in controls (p < 0.01). At 15 min during the intervention, the mean pain score for nitrous oxide/oxygen was 2.0 ± 1.1 compared with 5.6 ± 1.3 for oxygen (p < 0.01). This study shows that self-administered nitrous oxide/oxygen mixture was effective in reducing moderate to severe breakthrough pain among patients with cancer. The management of breakthrough cancer pain is always a challenge due to its temporal characteristics of rapid onset, moderate to severe in intensity, short duration (median 30-60 min). Our study find that self-administered nitrous oxide/oxygen mixture was effective in reducing moderate to severe breakthrough cancer pain. © 2017 European Pain Federation - EFIC®.

Stratified premedication strategy for the prevention of contrast media hypersensitivity in high-risk patients.

PubMed

Lee, Suh-Young; Yang, Min Suk; Choi, Young-Hoon; Park, Chang Min; Park, Heung-Woo; Cho, Sang Heon; Kang, Hye-Ryun

2017-03-01

Although the severity of hypersensitivity reactions to iodinated contrast media varies, it is well correlated with the severity of recurrent reactions; however, prophylaxis protocols are not severity-stratified. To assess the outcomes of tailored prophylaxis according to the severity of hypersensitivity reactions to iodinated contrast media. Our premedication protocols were stratified based on the severity of previous reactions: (1) 4 mg of chlorpheniramine for mild reactions, (2) adding 40 mg of methylprednisolone for moderate reactions, and (3) adding multiple doses of 40 mg of methylprednisolone for severe index reactions. Cases of reexposure in patients with a history of hypersensitivity reactions were routinely monitored and mandatorily recorded. Among a total of 850 patients who underwent enhanced computed tomography after severity-tailored prophylaxis, breakthrough reactions occurred in 17.1%, but most breakthrough reactions (89.0%) were mild and did not require medical treatment. Additional corticosteroid use did not reduce the breakthrough reaction rate in cases with a mild index reaction (16.8% vs 17.2%, P = .70). However, underpremedication with a single dose of corticosteroid revealed significantly higher rates of breakthrough reaction than did double doses of corticosteroid in cases with a severe index reaction (55.6% vs 17.4%, P = .02). Changing the iodinated contrast media resulted in an additional reduction of the breakthrough reaction rate overall (14.9% vs 32.1%, P = .001). In a total severity-based stratified prophylaxis regimens and changing iodinated contrast media can be considered in patients with a history of previous hypersensitivity reaction to iodinated contrast media to reduce the risk of breakthrough reactions. Copyright © 2016 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

Vapour breakthrough behaviour of carbon tetrachloride - A simulant for chemical warfare agent on ASZMT carbon: A comparative study with whetlerite carbon

NASA Astrophysics Data System (ADS)

Srivastava, Avanish Kumar; Shah, Dilip K.; Mahato, T. H.; Roy, A.; Yadav, S. S.; Srivas, S. K.; Singh, Beer

2013-06-01

ASZMT and whetlerite carbon was prepared by impregnation of active carbon with ammonical salts of Cu (II), Ag (I), Zn (II), Mo (VI), TEDA and Cu (II), Ag (I), Cr (VI), NaOH, C5H5N respectively using incipient wetness technique. Thereafter, impregnated carbon systems were characterized using scanning electron microscopy, energy dispersive X-ray, atomic absorption spectroscopy, thermogravimetry and surface characterization techniques. Impregnated carbon systems were evaluated under dynamic conditions against carbon tetrachloride (CCl4) vapour that was used as a simulant for the persistent chemical warfare agents for testing breakthrough times of filter cartridges and canisters of gas masks in the national approval test of respirators. The protective potential of ASZMT carbon was compared with the whetlerite carbon which is presently used in NBC filtration system. The effect of CCl4 concentration, test flow rate, temperature and relative humidity on the breakthrough behaviour of the impregnated carbon systems has also been studied. The study clearly indicated that the whetlerite carbon possessed breakthrough time greater than ASZMT carbon. However, ASZMT carbon provided adequate protection against CCl4 vapours and can be used as an alternative to whetlerite carbon that contain Cr(VI), which is reported to be carcinogenic and having lesser shelf life. The study indicated the breakthrough time of impregnated carbon systems were found to decrease with the increase of the CCl4 concentration and flow rate. The variation in temperature and relative humidity did not significantly affect the breakthrough behaviour of impregnated carbon systems at high vapour concentration of CCl4 whereasbreak through time of impregnated carbon systems reduced by an increase of relative humidity at low CCl4 vapour concentration.

PLANNING FOR OPTICAL DISK TECHNOLOGY WITH DIGITAL CARTOGRAPHY.

USGS Publications Warehouse

Light, Donald L.

1984-01-01

Progress in the computer field continues to suggest that the transition from traditional analog mapping systems to digital systems has become a practical possibility. A major shortfall that still exists in digital systems is the need for very large mass storage capacity. The decade of the 1980's has introduced laser optical disk storage technology, which may be the breakthrough needed for mass storage. This paper addresses system concepts for digital cartography during the transition period. Emphasis is placed on determining U. S. Geological Survey mass storage requirements and introducing laser optical disk technology for handling storage problems for digital data in this decade.

Heat Treatment Used to Strengthen Enabling Coating Technology for Oil-Free Turbomachinery

NASA Technical Reports Server (NTRS)

Edmonds, Brian J.; DellaCorte, Christopher

2002-01-01

The PS304 high-temperature solid lubricant coating is a key enabling technology for Oil- Free turbomachinery propulsion and power systems. Breakthroughs in the performance of advanced foil air bearings and improvements in computer-based finite element modeling techniques are the key technologies enabling the development of Oil-Free aircraft engines being pursued by the Oil-Free Turbomachinery team at the NASA Glenn Research Center. PS304 is a plasma spray coating applied to the surface of shafts operating against foil air bearings or in any other component requiring solid lubrication at high temperatures, where conventional materials such as graphite cannot function.

Electro-optic routing of photons from a single quantum dot in photonic integrated circuits

NASA Astrophysics Data System (ADS)

Midolo, Leonardo; Hansen, Sofie L.; Zhang, Weili; Papon, Camille; Schott, Rüdiger; Ludwig, Arne; Wieck, Andreas D.; Lodahl, Peter; Stobbe, Søren

2017-12-01

Recent breakthroughs in solid-state photonic quantum technologies enable generating and detecting single photons with near-unity efficiency as required for a range of photonic quantum technologies. The lack of methods to simultaneously generate and control photons within the same chip, however, has formed a main obstacle to achieving efficient multi-qubit gates and to harness the advantages of chip-scale quantum photonics. Here we propose and demonstrate an integrated voltage-controlled phase shifter based on the electro-optic effect in suspended photonic waveguides with embedded quantum emitters. The phase control allows building a compact Mach-Zehnder interferometer with two orthogonal arms, taking advantage of the anisotropic electro-optic response in gallium arsenide. Photons emitted by single self-assembled quantum dots can be actively routed into the two outputs of the interferometer. These results, together with the observed sub-microsecond response time, constitute a significant step towards chip-scale single-photon-source de-multiplexing, fiber-loop boson sampling, and linear optical quantum computing.

Hole-Transporting Materials for Printable Perovskite Solar Cells

PubMed Central

Salunke, Jagadish K.; Priimagi, Arri

2017-01-01

Perovskite solar cells (PSCs) represent undoubtedly the most significant breakthrough in photovoltaic technology since the 1970s, with an increase in their power conversion efficiency from less than 5% to over 22% in just a few years. Hole-transporting materials (HTMs) are an essential building block of PSC architectures. Currently, 2,2’,7,7’-tetrakis-(N,N’-di-p-methoxyphenylamine)-9,9’-spirobifluorene), better known as spiro-OMeTAD, is the most widely-used HTM to obtain high-efficiency devices. However, it is a tremendously expensive material with mediocre hole carrier mobility. To ensure wide-scale application of PSC-based technologies, alternative HTMs are being proposed. Solution-processable HTMs are crucial to develop inexpensive, high-throughput and printable large-area PSCs. In this review, we present the most recent advances in the design and development of different types of HTMs, with a particular focus on mesoscopic PSCs. Finally, we outline possible future research directions for further optimization of the HTMs to achieve low-cost, stable and large-area PSCs. PMID:28914823

Nanostructured material-based biofuel cells: recent advances and future prospects.

PubMed

Zhao, Cui-E; Gai, Panpan; Song, Rongbin; Chen, Ying; Zhang, Jianrong; Zhu, Jun-Jie

2017-03-06

During the past decade, biofuel cells (BFCs) have emerged as an emerging technology on account of their ability to directly generate electricity from biologically renewable catalysts and fuels. Due to the boost in nanotechnology, significant advances have been accomplished in BFCs. Although it is still challenging to promote the performance of BFCs, adopting nanostructured materials for BFC construction has been extensively proposed as an effective and promising strategy to achieve high energy production. In this review, we presented the major novel nanostructured materials applied for BFCs and highlighted the breakthroughs in this field. Based on different natures of the bio-catalysts and electron transfer process at the bio-electrode surfaces, the fundamentals of BFC systems, including enzymatic biofuel cells (EBFCs) and microbial fuel cells (MFCs), have been elucidated. In particular, the principle of electrode materials design has been detailed in terms of enhancing electrical communications between biological catalysts and electrodes. Furthermore, we have provided the applications of BFCs and potential challenges of this technology.

Chemical production on Mars using in situ propellant production technology

NASA Technical Reports Server (NTRS)

Ash, Robert L.

1986-01-01

In situ propellant production (ISPP) was examined in terms of its applicability to a manned Mars mission. Production of oxygen from Martian atmosphere was used as the baseline system for ISPP technology assessment. It was concluded that production of oxygen was an important element in a manned Mars mission which could be developed in terrestrial laboratories. Expert system methodology will be required to enable reliable, autonomous production of oxygen. Furthermore, while no major technical breakthroughs are required, this research requires a long lead time to permit its systematic evolution.

The Development Status and Key Technologies of Solar Powered Unmanned Air Vehicle

NASA Astrophysics Data System (ADS)

Sai, Li; Wei, Zhou; Xueren, Wang

2017-03-01

By analyzing the development status of several typical solar powered unmanned aerial vehicles (UAV) at home and abroad, the key technologies involved in the design and manufacture of solar powered UAV and the technical difficulties need to be solved at present are obtained. It is pointed out that with the improvement of energy system efficiency, advanced aerodynamic configuration design, realization of high applicability flight stability and control system, breakthrough of efficient propulsion system, the application prospect of solar powered UAV will be more extensive.

Beyond robotics: a new proactive research initiative from the EU IST program.

PubMed

Karp, Pekka

2005-01-01

A research initiative on embodied artificial intelligence has been launched in 2004 by the Future and Emerging Technologies (FET) arm of the Information Society Technologies (IST) programme of the European Union. The initiative is called "Beyond Robotics" to emphasize that the research projects funded are required to set ambitious objectives and to aim at breakthroughs going well beyond the state of the art. Four projects worth 20 M E of EC funding were selected for 2004-2008 to address the objectives of the initiative.

[Adaptive optics for ophthalmology].

PubMed

Saleh, M

2016-04-01

Adaptive optics is a technology enhancing the visual performance of an optical system by correcting its optical aberrations. Adaptive optics have already enabled several breakthroughs in the field of visual sciences, such as improvement of visual acuity in normal and diseased eyes beyond physiologic limits, and the correction of presbyopia. Adaptive optics technology also provides high-resolution, in vivo imaging of the retina that may eventually help to detect the onset of retinal conditions at an early stage and provide better assessment of treatment efficacy. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

PNNL pushing scientific discovery through data intensive computing breakthroughs

ScienceCinema

Deborah Gracio; David Koppenaal; Ruby Leung

2018-05-18

The Pacific Northwest National Laboratory's approach to data intensive computing (DIC) is focused on three key research areas: hybrid hardware architectures, software architectures, and analytic algorithms. Advancements in these areas will help to address, and solve, DIC issues associated with capturing, managing, analyzing and understanding, in near real time, data at volumes and rates that push the frontiers of current technologies.

Information and Communication Technology in Teacher Education in Vietnam: From Policy to Practice

ERIC Educational Resources Information Center

Peeraer, Jef; Van Petegem, Peter

2012-01-01

During the school year 2008-2009, the Ministry of Education and Training of Vietnam launched the "Year of ICT" to produce a breakthrough in educational innovation. In light of this development we have carried out a policy analysis to study the national vision on ICT in education. The policy analysis takes into account a decade of…

Technology for National Security

DTIC Science & Technology

1988-10-01

tanks, and automobiles are already driven by turbines, and more will be. Turbines must be operated at very high temperatures to compete with the...efficiency of internal combustion engines. Cheap, high-temperature turbines for automobiles and land vehicles will probably require the use of ceramic...of bytes of data. Erasable optical storage techniques are maturing and breakthroughs in reprogrammable optical storage for platform or missile

Fentanyl Buccal Tablet for the Treatment of Breakthrough Pain: Pharmacokinetics of Buccal Mucosa Delivery and Clinical Efficacy

PubMed Central

Darwish, Mona; Hamed, Ehab; Messina, John

2010-01-01

The treatment of breakthrough pain (BTP), a transitory exacerbation of pain that occurs on a background of otherwise-controlled, persistent pain, requires an opioid formulation and/or method of administration that can provide rapid and extensive systemic exposure. Fentanyl buccal tablet (FBT; FENTORA®, Cephalon, Inc.) employs OraVescent® drug delivery technology, which enhances the rate and extent of fentanyl absorption. OraVescent technology enhances the oral dissolution and buccal absorption of fentanyl, which facilitates rapid uptake of fentanyl into the bloodstream, reducing gastrointestinal absorption and minimizing extensive first-pass metabolism. The resulting pharmacokinetic profile of FBT is characterized by greater bioavailability and a higher early systemic exposure compared with the earlier oral transmucosal fentanyl citrate formulation. In clinical studies of opioid-tolerant patients with cancer-related and noncancer-related BTP, FBT has provided consistent and clinically relevant improvements in pain intensity and pain relief relative to placebo, with a safety and tolerability profile that is generally typical of that observed with other potent opioids. The pharmacokinetic properties of FBT allow for meaningful clinical efficacy, with an onset of action that closely matches the onset of BTP. PMID:20634985

Mobilization of natural colloids from an iron oxide-coated sand aquifer--Effect of pH and ionic strength

USGS Publications Warehouse

Bunn, Rebecca A.; Magelky, Robin D.; Ryan, Joseph N.; Elimelech, Menachem

2002-01-01

Field and laboratory column experiments were performed to assess the effect of elevated pH and reduced ionic strength on the mobilization of natural colloids in a ferric oxyhydroxide-coated aquifer sediment. The field experiments were conducted as natural gradient injections of groundwater amended by sodium hydroxide additions. The laboratory experiments were conducted in columns of undisturbed, oriented sediments and disturbed, disoriented sediments. In the field, the breakthrough of released colloids coincided with the pH pulse breakthrough and lagged the bromide tracer breakthrough. The breakthrough behavior suggested that the progress of the elevated pH front controlled the transport of the mobilized colloids. In the laboratory, about twice as much colloid release occurred in the disturbed sediments as in the undisturbed sediments. The field and laboratory experiments both showed that the total mass of colloid release increased with increasing pH until the concurrent increase in ionic strength limited release. A decrease in ionic strength did not mobilize significant amounts of colloids in the field. The amount of colloids released normalized to the mass of the sediments was similar for the field and the undisturbed laboratory experiments.

The impact of "omic" and imaging technologies on assessing the host immune response to biodefence agents.

PubMed

Tree, Julia A; Flick-Smith, Helen; Elmore, Michael J; Rowland, Caroline A

2014-01-01

Understanding the interactions between host and pathogen is important for the development and assessment of medical countermeasures to infectious agents, including potential biodefence pathogens such as Bacillus anthracis, Ebola virus, and Francisella tularensis. This review focuses on technological advances which allow this interaction to be studied in much greater detail. Namely, the use of "omic" technologies (next generation sequencing, DNA, and protein microarrays) for dissecting the underlying host response to infection at the molecular level; optical imaging techniques (flow cytometry and fluorescence microscopy) for assessing cellular responses to infection; and biophotonic imaging for visualising the infectious disease process. All of these technologies hold great promise for important breakthroughs in the rational development of vaccines and therapeutics for biodefence agents.

We Canwatch It For You Wholesale

NASA Astrophysics Data System (ADS)

Lipton, Alan J.

This chapter provides an introduction to video analytics—a branch of computer vision technology that deals with automatic detection of activities and events in surveillance video feeds. Initial applications focused on the security and surveillance space, but as the technology improves it is rapidly finding a home in many other application areas. This chapter looks at some of those spaces, the requirements they impose on video analytics systems, and provides an example architecture and set of technology components to meet those requirements. This exemplary system is put through its paces to see how it stacks up in an embedded environment. Finally, we explore the future of video analytics and examine some of the market requirements that are driving breakthroughs in both video analytics and processor platform technology alike.

Efficacy and safety of tramadol/acetaminophen in the treatment of breakthrough pain in cancer patients.

PubMed

Ho, Ming-Lin; Chung, Chih-Yuan; Wang, Chuan-Cheng; Lin, Hsuan-Yu; Hsu, Nicholas C; Chang, Cheng-Shyong

2010-12-01

We evaluated the analgesic efficacy and safety of tramadol 37.5 mg/acetaminophen 325 mg combination tablet, for the treatment of breakthrough pain in cancer patients. This study was conducted at Changhua Christian Hospital, Changhua, Taiwan from January 2006 to February 2007. The single-center and open-label study enrolled 59 opioid-treated cancer patients with at least moderate breakthrough pain (visual analog scale [VAS] score ≥40mm on a 100-mm scale). The efficacy measures included VAS scores and adverse effect assessment 10, 30, and 60 minutes after the administration of tramadol/acetaminophen. Visual analog scale score at time of pain relief was reported. The mean VAS score when the breakthrough pain episode began (0 minute) was 77.8. Analysis showed significant better mean pain VAS scores at 10, 30, and 60 minutes after the administration of tramadol/acetaminophen (p≤0.001 versus 0 min for all 3 time points). The mean time to pain relief was 597.2 seconds and the mean VAS score at time of relief was 43.4. The effective rates, defined by more than 30% reduction of the VAS score, after 10 minutes of administration was 74.6%, 30 minutes 86.4%, and one hour 94.9% (p≤0.001 versus 0 minute for all 3 time points). Two cases of drowsiness were reported. Tramadol/acetaminophen might be efficacious and safe in the treatment of breakthrough pain in cancer.

Autostereoscopic display technology for mobile 3DTV applications

NASA Astrophysics Data System (ADS)

Harrold, Jonathan; Woodgate, Graham J.

2007-02-01

Mobile TV is now a commercial reality, and an opportunity exists for the first mass market 3DTV products based on cell phone platforms with switchable 2D/3D autostereoscopic displays. Compared to conventional cell phones, TV phones need to operate for extended periods of time with the display running at full brightness, so the efficiency of the 3D optical system is key. The desire for increased viewing freedom to provide greater viewing comfort can be met by increasing the number of views presented. A four view lenticular display will have a brightness five times greater than the equivalent parallax barrier display. Therefore, lenticular displays are very strong candidates for cell phone 3DTV. Selection of Polarisation Activated Microlens TM architectures for LCD, OLED and reflective display applications is described. The technology delivers significant advantages especially for high pixel density panels and optimises device ruggedness while maintaining display brightness. A significant manufacturing breakthrough is described, enabling switchable microlenses to be fabricated using a simple coating process, which is also readily scalable to large TV panels. The 3D image performance of candidate 3DTV panels will also be compared using autostereoscopic display optical output simulations.

Discoveries and Breakthroughs Inside Science:Informal Education for STEM and AGU Related Sciences

NASA Astrophysics Data System (ADS)

Lorditch, E.

2007-12-01

As a primary source of news, more people rely on local TV news than any other medium for their news and information. As a result, The American Geophysical Union has partnered with the American Institute of Physics in their production of Discoveries and Breakthroughs Inside Science (DBIS). DBIS is syndicated science news service that distributes 12, 90-second science news segments to over 90 local TV stations throughout the USA each month. While the segments cover a wide range of STEM (science, technology, engineering, and mathematics)topics, approximately 4 of these segments each month focus on research topics of interest to AGU members. Meet DBIS's senior science editor and learn about DBIS. Find out how you can participate in a DBIS segment, help with DBIS production, learn how DBIS segment topics are chosen, and hear why the AGU got involved with DBIS and how they work with the program.

From Bottleneck to Breakthrough: Urbanization and the Future of Biodiversity Conservation.

PubMed

Sanderson, Eric W; Walston, Joseph; Robinson, John G

2018-06-01

For the first time in the Anthropocene, the global demographic and economic trends that have resulted in unprecedented destruction of the environment are now creating the necessary conditions for a possible renaissance of nature. Drawing reasonable inferences from current patterns, we can predict that 100 years from now, the Earth could be inhabited by between 6 and 8 billion people, with very few remaining in extreme poverty, most living in towns and cities, and nearly all participating in a technologically driven, interconnected market economy. Building on the scholarship of others in demography, economics, sociology, and conservation biology, here, we articulate a theory of social-environmental change that describes the simultaneous and interacting effects of urban lifestyles on fertility, poverty alleviation, and ideation. By recognizing the shifting dynamics of these macrodrivers, conservation practice has the potential to transform itself from a discipline managing declines ("bottleneck") to a transformative movement of recovery ("breakthrough").

Dynamic adsorption of CO2/N2 on cation-exchanged chabazite SSZ-13: A breakthrough analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bower, Jamey K.; Barpaga, Dushyant; Prodinger, Sebastian

2018-04-17

Alkali exchanged SSZ-13 adsorbents were investigated for their applicability in separating N2 from CO2 in flue gas streams using a dynamic breakthrough method. In contrast to IAST calculations based on equilibrium isotherms, K+ exchanged SSZ-13 was found to yield the best N2 productivity under dynamic conditions where diffusion properties play a significant role. This was attributed to the selective, partial blockage of access to the CHA cavities enhancing the separation potential in a 15/85 CO2/N2 binary gas mixture.

Dynamic Adsorption of CO 2 /N 2 on Cation-Exchanged Chabazite SSZ-13: A Breakthrough Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bower, Jamey K.; Barpaga, Dushyant; Prodinger, Sebastian

2018-03-30

Alkali exchanged SSZ-13 adsorbents were investigated for their applicability in separating N2 from CO 2 in flue gas streams using a dynamic breakthrough method. In contrast to IAST calculations based on equilibrium isotherms, K+ exchanged SSZ-13 was found to yield the best N2 productivity under dynamic conditions where diffusion properties play a significant role. This was attributed to the selective, partial blockage of access to the CHA cavities enhancing the separation potential in a 15/85 CO2/N2 binary gas mixture.

Nanostructured Bulk Thermoelectric Generator for Efficient Power Harvesting for Self-powered Sensor Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yanliang; Butt, Darryl; Agarwal, Vivek

2015-07-01

The objective of this Nuclear Energy Enabling Technology research project is to develop high-efficiency and reliable thermoelectric generators for self-powered wireless sensors nodes utilizing thermal energy from nuclear plant or fuel cycle. The power harvesting technology has crosscutting significance to address critical technology gaps in monitoring nuclear plants and fuel cycle. The outcomes of the project will lead to significant advancement in sensors and instrumentation technology, reducing cost, improving monitoring reliability and therefore enhancing safety. The self-powered wireless sensor networks could support the long-term safe and economical operation of all the reactor designs and fuel cycle concepts, as well asmore » spent fuel storage and many other nuclear science and engineering applications. The research is based on recent breakthroughs in high-performance nanostructured bulk (nanobulk) thermoelectric materials that enable high-efficiency direct heat-to-electricity conversion over a wide temperature range. The nanobulk thermoelectric materials that the research team at Boise State University and University of Houston has developed yield up to a 50% increase in the thermoelectric figure of merit, ZT, compared with state-of-the-art bulk counterparts. This report focuses on the selection of optimal thermoelectric materials for this project. The team has performed extensive study on two thermoelectric materials systems, i.e. the half-Heusler materials, and the Bismuth-Telluride materials. The report contains our recent research results on the fabrication, characterization and thermoelectric property measurements of these two materials.« less

Pore-Lining Composition and Capillary Breakthrough Pressure of Mudstone Caprocks: Sealing Efficiency of Geologic CO2 Storage Sites

NASA Astrophysics Data System (ADS)

Heath, J. E.; Dewers, T. A.; McPherson, B. J.; Kotula, P. G.

2010-12-01

Subsurface containment of CO2 is predicated on effective caprock sealing. Many previous studies have relied on macroscopic measurements of capillary breakthrough pressure and other petrophysical properties without direct examination of solid phases that line pore networks and directly contact fluids. However, pore-lining phases strongly contribute to sealing behavior through interfacial interactions among CO2, brine, and the mineral or non-mineral phases. Our high resolution (i.e., sub-micron) examination of the composition of pore-lining phases of several continental and marine mudstones indicates that sealing efficiency (i.e., breakthrough pressure) is governed by pore shapes and pore-lining phases that are not identifiable except through direct characterization of pores. Bulk X-ray diffraction data does not indicate which phases line the pores and may be especially lacking for mudstones with organic material. Organics can line pores and may represent once-mobile phases that modify the wettability of an originally clay-lined pore network. For shallow formations (i.e., < ~800 m depth), interfacial tension and contact angles result in breakthrough pressures that may be as high as those needed to fracture the rock—thus, in the absence of fractures, capillary sealing efficiency is indicated. Deeper seals have poorer capillary sealing if mica-like wetting dominates the wettability. We thank the U.S. Department of Energy’s National Energy Technology Laboratory and the Office of Basic Energy Sciences, and the Southeast and Southwest Carbon Sequestration Partnerships for supporting this work. Sandia National Laboratories is a multi-program laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Company, for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-AC04-94AL85000.

Wireless sensors linked to climate financing for globally affordable clean cooking

NASA Astrophysics Data System (ADS)

Ramanathan, Tara; Ramanathan, Nithya; Mohanty, Jeevan; Rehman, Ibrahim H.; Graham, Eric; Ramanathan, Veerabhadran

2017-01-01

Three billion of the world’s poorest people mostly rely on solid biomass for cooking, with major consequences to health and environment. We demonstrate the untapped potential of wireless sensors connected to the `internet of things’ to make clean energy solutions affordable for those at the bottom of the energy pyramid. This breakthrough approach is demonstrated by a 17-month field study with 4,038 households in India. Major findings include: self-reported data on cooking duration have little correlation with actual usage data from sensors; sensor data revealed that the distribution of high and low users varied over time, and the actual mitigation of climate pollution was only 25% of the projected mitigation; climate credits were shown to significantly incentivize the use of cleaner technologies.

Survey of robot lawn mowers

NASA Astrophysics Data System (ADS)

Hicks, Rob W., II; Hall, Ernest L.

2000-10-01

Lawn mowing is considered by many to be one of the most boring and tiring routine household tasks. It is also one of the most promising personal robot applications. Several devices have not been invented and some manufactured products are available for lawn mowing. The purpose of this paper is to survey the state of the art in robotic lawn mowers to highlight the requirements and capabilities of current devices. A brief survey of available robot products, typical patents and some test bed prototypes are presented. Some enabling technologies which could make the devices more capable are also suggested. Some predictions indicate that the robot lawn mower will be the breakthrough device in robotics. The significance of this research lies in the presentation of an overview of a potential major market for personal robots.

2006 Joint Chemical Biological, Radiological and Nuclear (CBRN) Conference and Exhibition

DTIC Science & Technology

2006-06-28

methods that might counter or cancel our current military advantages • Defeat terrorist networks • Defend homeland in depth • Prevent acquisition or...Systems approach to the detection of chemical and biological agents with a focus on genetically engineered organisms ( GMOs )/genetically engineered...and possessing breakthrough technological capabilities intended to supplant U.S. advantages in particular operational domains. (capsize our power

Image Acquisition and Quality in Digital Radiography.

PubMed

Alexander, Shannon

2016-09-01

Medical imaging has undergone dramatic changes and technological breakthroughs since the introduction of digital radiography. This article presents information on the development of digital radiography and types of digital radiography systems. Aspects of image quality and radiation exposure control are highlighted as well. In addition, the article includes related workplace changes and medicolegal considerations in the digital radiography environment. ©2016 American Society of Radiologic Technologists.

Marine benefits from NASA's global differential system: sub-meter positioning, anywhere, anytime

NASA Technical Reports Server (NTRS)

Bar-Sever, Y.

2000-01-01

Precise real-time, onboard knowledge of a platform s state (position and velocity) is a critical compponent in many marine applications. This article describes a recent technology development that provides a breakthrough in this capability for platforms carrying a dual-frequency GPS receiver - seamless global coverage and roughly an order of magnitude improvement in accuracy compared to state-of-the-art.

JPRS Report, Science & Technology, Europe, FRG: Official Report om Multiyear Research Funding, Trends

DTIC Science & Technology

1988-08-23

research institutions. The special recognition of performance and the chal- lenge to top performance in research, development, and innovation will...continue to be a central concern of the federal government. Top performances , the achievement of internationally recognized breakthroughs, and suc...government places on improving busi- ness framework conditions for more growth and employ- ment, for strengthening the power of performance , com

Improving American Innovation,

DTIC Science & Technology

1984-03-01

Why has Jap~m succeeded: western technology and the Japanese ethos. New York: Cambridge University Press, 1982. (NC 462 MO634 Norman , Colin...productivity growth. Review of Economics and Statistics 64:627-34, N~ovember 1982. Smith, G. W. and W. N. Smallwood . Preparing for breakthroughs: the rewards of...recommendations. Edited by Charles E. Larsen and WI. Novis Smith. Washington: American Chemical Society, 1980. Kobert, Norman . Agressivn management style

National Biofuels Action Plan

DTIC Science & Technology

2008-10-01

edge biofuel production processes . In early 2007 President Bush announced the “Twenty-in-Ten” initiative, a plan to reduce gasoline consumption by 20...Feedstock Logistics consists of harvesting or collecting feedstock from the area of production , processing it for use in biorefi neries, storing it... production targets are too costly to compete effectively in the marketplace. Because the pace of technological breakthroughs required to lower costs is

Impact of Clean Energy R&D on the U.S. Power Sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donohoo-Vallett, Paul; Mai, Trieu; Mowers, Matthew

The U.S. government, along with other governments, private corporations and organizations, invests significantly in research, development, demonstration and deployment (RDD&D) activities in clean energy technologies, in part to achieve the goal of a clean, secure, and reliable energy system. While specific outcomes and breakthroughs resulting from RDD&D investment are unpredictable, it can be instructive to explore the potential impacts of clean energy RDD&D activities in the power sector and to place those impacts in the context of current and anticipated market trends. This analysis builds on and leverages analysis by the U.S. Department of Energy (DOE) titled “Energy CO 2more » Emissions Impacts of Clean Energy Technology Innovation and Policy” (DOE 2017). Similar to DOE (2017), we explore how additional improvements in cost and performance of clean energy technologies could impact the future U.S. energy system; however, unlike the economy-wide modeling used in DOE (2017) our analysis is focused solely on the electricity sector and applies a different and more highly spatially-resolved electric sector model. More specifically, we apply a scenario analysis approach to explore how assumed further advancements in clean electricity technologies would impact power sector generation mix, electricity system costs, and power sector carbon dioxide (CO 2) emissions.« less

Product reliability and thin-film photovoltaics

NASA Astrophysics Data System (ADS)

Gaston, Ryan; Feist, Rebekah; Yeung, Simon; Hus, Mike; Bernius, Mark; Langlois, Marc; Bury, Scott; Granata, Jennifer; Quintana, Michael; Carlson, Carl; Sarakakis, Georgios; Ogden, Douglas; Mettas, Adamantios

2009-08-01

Despite significant growth in photovoltaics (PV) over the last few years, only approximately 1.07 billion kWhr of electricity is estimated to have been generated from PV in the US during 2008, or 0.27% of total electrical generation. PV market penetration is set for a paradigm shift, as fluctuating hydrocarbon prices and an acknowledgement of the environmental impacts associated with their use, combined with breakthrough new PV technologies, such as thin-film and BIPV, are driving the cost of energy generated with PV to parity or cost advantage versus more traditional forms of energy generation. In addition to reaching cost parity with grid supplied power, a key to the long-term success of PV as a viable energy alternative is the reliability of systems in the field. New technologies may or may not have the same failure modes as previous technologies. Reliability testing and product lifetime issues continue to be one of the key bottlenecks in the rapid commercialization of PV technologies today. In this paper, we highlight the critical need for moving away from relying on traditional qualification and safety tests as a measure of reliability and focus instead on designing for reliability and its integration into the product development process. A drive towards quantitative predictive accelerated testing is emphasized and an industrial collaboration model addressing reliability challenges is proposed.

The History of Science and Technology at Bell Labs

NASA Astrophysics Data System (ADS)

Bishop, David

2008-03-01

Over the last 80 years, Bell Labs has been one of the most scientifically and technologically productive research labs in the world. Inventions such as the transistor, laser, cell phone, solar cell, negative feedback amplifier, communications satellite and many others were made there. Scientific breakthroughs such as discovery of the Big Bang, the wave nature of the electron, electron localization and the fractional quantum hall effect were also made there making Bell Labs almost unique in terms of large impacts in both science and technology. In my talk, I will discuss the history of the lab, talk about the present and give some suggestions for how I see it evolving into the future.

In vitro meat production system: why and how?

PubMed

Sharma, Shruti; Thind, Sukhcharanjit Singh; Kaur, Amarjeet

2015-12-01

Due to the nutritional importance and the sustained popularity of meat as a foodstuff, the livestock production sector has been expanding incessantly. This exponential growth of livestock meat sector poses a gigantic challenge to the sustainability of food production system. A new technological breakthrough is being contemplated to develop a substitute for livestock meat. The idea is to grow meat in a culture in the lab and manipulate its composition selectively. This paper aims to discuss the concept of In Vitro Meat production system, articulate the underlying technology and analyse the context of its implications, as proposed by several scientists and stakeholders. The challenges facing this emerging technology have also been discussed.

Release 0.0: clinical information technology in the real world.

PubMed

Kleinke, J D

1998-01-01

The industrialization of medical care delivery, compelled by fifteen years of reimbursement reform, has given rise to a commercial health information technology (HIT) industry. Well financed by Wall Street, the HIT industry offers a variety of ready-made solutions designed to transform a health care organization's raw data resources into useful clinical information. Many of the resulting clinical decision-support products are encumbered by numerous insurmountable intellectual and technical problems and, as a consequence, meet with cultural resistance from physicians. The long-awaited but costly implementation of electronic medical records (EMRs) will make these pioneering but flawed efforts obsolete, if EMR development successfully exploits recent technological breakthroughs and the ongoing consolidation of health care organizations.

The Effect of New Oral Care Technologies on the Need for Dentists in 2040.

PubMed

Milgrom, Peter M; Horst, Jeremy A

2017-08-01

This article addresses changes in technology of oral self-care or professional care that may increase or decrease the demand for dentists by 2040. The focus is on dental caries, periodontitis, and temporomandibular joint disorders (TMD), as the first two are the main areas of current practice and because TMD is an area for growth. To address this question, the authors examined the scientific literature and government registries to identify recent or soon-to-be-available technologies. They also examined the state of translational efficiency, dissemination, and adoption of advances into dental practice. The pipeline of applicable technology is limited. Nevertheless, between now and 2040, emerging technologies will continue to reduce the need for training more dentists, while no technologies are emerging that will significantly increase the need. Technology in dentistry is adopted slowly as is true in other medical specialties. If a breakthrough product did appear, the results of industry-sponsored trials would be viewed skeptically by the profession, and considerable time would be required to establish the applicability of the findings to the broader population. Greater integration of dentistry into preventive medicine, with dentists offering point-of-service medical testing for systemic disease as suggested by the American Dental Association (ADA), would require a paradigm shift, can occur only over a lengthy period, and is unlikely to impact this assessment. This article was written as part of the project "Advancing Dental Education in the 21 st Century."

Flow and Noise Control: Review and Assessment of Future Directions

NASA Technical Reports Server (NTRS)

Thomas, Russell H.; Choudhari, Meelan M.; Joslin, Ronald D.

2002-01-01

Technologies for developing radically new aerovehicles that would combine quantum leaps in cost, safety, and performance benefits with environmental friendliness have appeared on the horizon. This report provides both an assessment of the current state-of-the-art in flow and noise control and a vision for the potential gains to be made, in terms of performance benefit for civil and military aircraft and a unique potential for noise reduction, via future advances in flow and noise technologies. This report outlines specific areas of research that will enable the breakthroughs necessary to bring this vision to reality. Recent developments in many topics within flow and noise control are reviewed. The flow control overview provides succinct summaries of various approaches for drag reduction and improved maneuvering. Both exterior and interior noise problems are examined, including dominant noise sources, physics of noise generation and propagation, and both established and proposed concepts for noise reduction. Synergy between flow and noise control is a focus and, more broadly, the need to pursue research in a more concurrent approach involving multiple disciplines. Also discussed are emerging technologies such as nanotechnology that may have a significant impact on the progress of flow and noise control.

Trends in Modern Drug Discovery.

PubMed

Eder, Jörg; Herrling, Paul L

2016-01-01

Drugs discovered by the pharmaceutical industry over the past 100 years have dramatically changed the practice of medicine and impacted on many aspects of our culture. For many years, drug discovery was a target- and mechanism-agnostic approach that was based on ethnobotanical knowledge often fueled by serendipity. With the advent of modern molecular biology methods and based on knowledge of the human genome, drug discovery has now largely changed into a hypothesis-driven target-based approach, a development which was paralleled by significant environmental changes in the pharmaceutical industry. Laboratories became increasingly computerized and automated, and geographically dispersed research sites are now more and more clustered into large centers to capture technological and biological synergies. Today, academia, the regulatory agencies, and the pharmaceutical industry all contribute to drug discovery, and, in order to translate the basic science into new medical treatments for unmet medical needs, pharmaceutical companies have to have a critical mass of excellent scientists working in many therapeutic fields, disciplines, and technologies. The imperative for the pharmaceutical industry to discover breakthrough medicines is matched by the increasing numbers of first-in-class drugs approved in recent years and reflects the impact of modern drug discovery approaches, technologies, and genomics.

Increased Science Instrumentation Funding Strengthens Mars Program

NASA Technical Reports Server (NTRS)

Graham, Lee D.; Graff, T. G.

2012-01-01

As the strategic knowledge gaps mature for the exploration of Mars, Mars sample return (MSR), and Phobos/Deimos missions, one approach that becomes more probable involves smaller science instrumentation and integrated science suites. Recent technological advances provide the foundation for a significant evolution of instrumentation; however, the funding support is currently too small to fully utilize these advances. We propose that an increase in funding for instrumentation development occur in the near-term so that these foundational technologies can be applied. These instruments would directly address the significant knowledge gaps for humans to Mars orbit, humans to the Martian surface, and humans to Phobos/ Deimos. They would also address the topics covered by the Decadal Survey and the Mars scientific goals, objectives, investigations and priorities as stated by the MEPAG. We argue that an increase of science instrumentation funding would be of great benefit to the Mars program as well as the potential for human exploration of the Mars system. If the total non-Earth-related planetary science instrumentation budget were increased 100% it would not add an appreciable amount to the overall NASA budget and would provide the real potential for future breakthroughs. If such an approach were implemented in the near-term, NASA would benefit greatly in terms of science knowledge of the Mars, Phobos/Deimos system, exploration risk mitigation, technology development, and public interest.

Hepatitis B viral breakthrough associated with inappropriate preservation of entecavir

PubMed Central

Karabay, Oguz; Tuna, Nazan; Yahyaoglu, Mehmet

2012-01-01

If virologic breakthrough is observed during chronic hepatitis B treatment, drug resistance or compliance problem should be considered. But in some cases, breakthrough depends on drug preservation conditions. We report the case of a 30-years-old man, who experienced viral breakthrough due to wrong preservation conditions of the drug. PMID:22345891

Stitching Techniques Advance Optics Manufacturing

NASA Technical Reports Server (NTRS)

2010-01-01

Because NASA depends on the fabrication and testing of large, high-quality aspheric (nonspherical) optics for applications like the James Webb Space Telescope, it sought an improved method for measuring large aspheres. Through Small Business Innovation Research (SBIR) awards from Goddard Space Flight Center, QED Technologies, of Rochester, New York, upgraded and enhanced its stitching technology for aspheres. QED developed the SSI-A, which earned the company an R&D 100 award, and also developed a breakthrough machine tool called the aspheric stitching interferometer. The equipment is applied to advanced optics in telescopes, microscopes, cameras, medical scopes, binoculars, and photolithography."

Continuing evolution of in-vitro diagnostic instrumentation

NASA Astrophysics Data System (ADS)

Cohn, Gerald E.

2000-04-01

The synthesis of analytical instrumentation and analytical biochemistry technologies in modern in vitro diagnostic instrumentation continues to generate new systems with improved performance and expanded capability. Detection modalities have expanded to include multichip modes of fluorescence, scattering, luminescence and reflectance so as to accommodate increasingly sophisticated immunochemical and nucleic acid based reagent systems. The time line graph of system development now extends from the earliest automated clinical spectrophotometers through molecule recognition assays and biosensors to the new breakthroughs of biochip and DNA diagnostics. This brief review traces some of the major innovations in the evolution of system technologies and previews the conference program.

Firefly: embracing future web technologies

NASA Astrophysics Data System (ADS)

Roby, W.; Wu, X.; Goldina, T.; Joliet, E.; Ly, L.; Mi, W.; Wang, C.; Zhang, Lijun; Ciardi, D.; Dubois-Felsmann, G.

2016-07-01

At IPAC/Caltech, we have developed the Firefly web archive and visualization system. Used in production for the last eight years in many missions, Firefly gives the scientist significant capabilities to study data. Firefly provided the first completely web based FITS viewer as well as a growing set of tabular and plotting visualizers. Further, it will be used for the science user interface of the LSST telescope which goes online in 2021. Firefly must meet the needs of archive access and visualization for the 2021 LSST telescope and must serve astronomers beyond the year 2030. Recently, our team has faced the fact that the technology behind Firefly software was becoming obsolete. We were searching for ways to utilize the current breakthroughs in maintaining stability, testability, speed, and reliability of large web applications, which Firefly exemplifies. In the last year, we have ported the Firefly to cutting edge web technologies. Embarking on this massive overhaul is no small feat to say the least. Choosing the technologies that will maintain a forward trajectory in a future development project is always hard and often overwhelming. When a team must port 150,000 lines of code for a production-level product there is little room to make poor choices. This paper will give an overview of the most modern web technologies and lessons learned in our conversion from GWT based system to React/Redux based system.

Space Propulsion Synergy Group ETO technology assessments

NASA Astrophysics Data System (ADS)

Bray, James

The Space Propulsion Synergy Group (SPSG), which was chartered to support long-range strategic planning, has, using a broad industry/government team, evaluated and achieved consensus on the vehicles, propulsion systems, and propulsion technologies that have the best long-term potential for achieving desired system attributes. The breakthrough that enabled broad consensus was developing criteria that are measurable a priori. The SPSG invented a dual prioritization approach that balances long-term strategic thrusts with current programmatic constraints. This enables individual program managers to make decisions based on both individual project needs and long-term strategic needs. Results indicate that an SSTO using an integrated modular engine has the best long-term potential for a 20 Klb class vehicle, and that health monitoring and control technologies are among the highest dual priority liquid rocket technologies.

Breakthrough: Fermilab Accelerator Technology

ScienceCinema

None

2018-02-07

There are more than 30,000 particle accelerators in operation around the world. At Fermilab, scientists are collaborating with other laboratories and industry to optimize the manufacturing processes for a new type of powerful accelerator that uses superconducting niobium cavities. Experimenting with unique polishing materials, a Fermilab team has now developed an efficient and environmentally friendly way of creating cavities that can propel particles with more than 30 million volts per meter.

Remote Possibilities: Explaining Innovations in Airpower

DTIC Science & Technology

2012-06-01

ground on a warm day. A technological breakthrough, the development of the turbine engine in the latter half of the 1950s, vastly improved rotary-wing...performance. Turbine -powered helicopters provided considerably more lifting power than piston-powered choppers, which greatly expanded the range...1945 to 1955. … In aircraft gas turbines the number of parts has increased from 9,000 in 1946 to 20,000 in 1957. Of precious engineering hours

Hypersonic Global Strike Feasibility and Options

DTIC Science & Technology

2012-02-15

materials for one-time use vehicles,123 and breakthroughs in in Low Energy Nuclear Reaction ( LENR ) research could revolutionize high-speed materials for air...breathing vehicles in the next 15 to 20 years.124 More research on possible LENR advances will accelerate hypersonic technology. Defense Industry...Revolution is not materials, is Energetics. LENR is being worked, some 1,000 to 1,000,000 times Chemical Energy Density, Fuel fraction/ weight goes away

Energy Storage: Breakthrough in Battery Technologies (Carbon Cycle 2.0)

ScienceCinema

Balsara, Nitash

2018-02-12

Nitash Balsara speaks at the Carbon Cycle 2.0 kick-off symposium Feb. 2, 2010. We emit more carbon into the atmosphere than natural processes are able to remove - an imbalance with negative consequences. Carbon Cycle 2.0 is a Berkeley Lab initiative to provide the science needed to restore this balance by integrating the Labs diverse research activities and delivering creative solutions toward a carbon-neutral energy future.

Ultra-Fine Highly Energetic Core-Shell Nanoparticles with Triggerable Protective Coatings

DTIC Science & Technology

2013-02-01

volume ratios and strong electronic coupling, which offers higher stored energy densities and decreased warhead size. Current technologies produce nano...aluminum (Al) – the most attractive high-energetic candidate for the use in explosives because of its density and high relative heat of oxide...major breakthrough in the area of explosive materials. II. Project Objectives The overall objective of this research program was to develop a new

The 2017 Nobel Prize in Chemistry: cryo-EM comes of age.

PubMed

Shen, Peter S

2018-03-01

The 2017 Nobel Prize in Chemistry was awarded to Jacques Dubochet, Joachim Frank, and Richard Henderson for "developing cryo-electron microscopy (cryo-EM) for the high-resolution structure determination of biomolecules in solution." This feature article summarizes some of the major achievements leading to the development of cryo-EM and recent technological breakthroughs that have transformed the method into a mainstream tool for structure determination.

Medical Device Plug-and-Play Interoperability Standards and Technology Leadership

DTIC Science & Technology

2010-10-01

Philips Medical Systems Impact of ARRA/HITECH on Device Connectivity: Safe? Effective? Say what?! Todd Cooper President Breakthrough Solutions...that could notify the physician when, say , one of the devices comes discon- nected in the high-vibration environment of the plane. There is no way at...Electronic record-keeping promises to be an improvement over previous methods (eliminating problems such as illeg- ible handwriting and records

Breakthrough: Fermilab Accelerator Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2012-04-23

There are more than 30,000 particle accelerators in operation around the world. At Fermilab, scientists are collaborating with other laboratories and industry to optimize the manufacturing processes for a new type of powerful accelerator that uses superconducting niobium cavities. Experimenting with unique polishing materials, a Fermilab team has now developed an efficient and environmentally friendly way of creating cavities that can propel particles with more than 30 million volts per meter.

Neuroscience is awaiting for a breakthrough: an essay bridging the concepts of Descartes, Einstein, Heisenberg, Hebb and Hayek with the explanatory formulations in this special issue.

PubMed

Başar, Erol; Karakaş, Sirel

2006-05-01

The paper presents gedankenmodels which, based on the theories and models in the present special issue, describe the conditions for a breakthrough in brain sciences and neuroscience. The new model is based on contemporary findings which show that the brain and its cognitive processes show super-synchronization. Accordingly, understanding the brain/body-mind complex is possible only when these three are considered as a wholistic entity and not as discrete structures or functions. Such a breakthrough and the related perspectives to the brain/body-mind complex will involve a transition from the mechanistic Cartesian system to a nebulous Cartesian system, one that is basically characterized by parallel computing and is further parallel to quantum mechanics. This integrated outlook on the brain/body-mind, or dynamic functionality, will make the treatment of also the meta-cognitive processes and the greater part of the iceberg, the unconscious, possible. All this will be possible only through the adoption of a multidisciplinary approach that will bring together the knowledge and the technology of the four P's which consist of physics, physiology, psychology and philosophy. The genetic approach to the functional dynamics of the brain/body-mind, where the oscillatory responses were found to be laws of brain activity, is presented in this volume as one of the most recent perspectives of neuroscience.

Breakthrough indicator for aromatic VOCs using needle trap samplers for activated carbon adsorbent.

PubMed

Cheng, Wen-Hsi; Jiang, Jia-Rong; Huang, Yi-Ning; Huang, Shiun-Chian; Yu, Yan-Pin

2012-08-01

Internal circulation cabinets equipped with granular activated carbon (GAC) for adsorbing volatile organic compounds (VOCs) are widely used to store bottles containing organic solvents in universities, colleges, and hospital laboratories throughout Taiwan. This work evaluates the VOC adsorption capacities of GAC using various adsorption times for gas stream mixtures of 100 ppm toluene and 100 ppm o-xylene. Additionally, needle trap sampling (NTS) technology was used to indicate the time for renewing the GAC to avoid VOC breakthrough from adsorbents. Experimental results demonstrate that the proposed models can linearly express toluene and o-xylene adsorption capacities as the natural logarithm of adsorption time (ln(t)) and can accurately simulate the equilibrium adsorption capacities (Qe, g VOCs/g GAC) for gaseous toluene and o-xylene. The NTS, packed with 60-80 mesh divinylbenzene (DVB) particles, was compared in terms of extraction efficiency by simultaneously using the 75-microm Carboxen/polydimethylsiloxane-solid-phase microextraction (Carboxen/PDMS-SPME) fiber for time-weighted average (TWA) sampling, and experimental results indicated that the packed DVB-NTS achieved higher toluene extraction rates. Additionally, the NTS installed in the outlet air stream for adsorbing toluene and o-xylene exhausted through GAC accurately indicated toluene and o-xylene breakthrough times of 4700-5000 min. The GAC-NTS operational instructions to indicate the replacing time of adsorbent in the internal circulation cabinets are also included in this paper.

Alternatives to antibiotics: a symposium on the challenges and solutions for animal production.

PubMed

Seal, Bruce S; Lillehoj, Hyun S; Donovan, David M; Gay, Cyril G

2013-06-01

Antibiotics are one of the most important medical discoveries of the 20th century and will remain an essential tool for treating animal and human diseases in the 21st century. However, antibiotic resistance among bacterial pathogens and concerns over their extensive use in food animals has garnered global interest in limiting antibiotic use in animal agriculture. Yet, limiting the availability of medical interventions to prevent and control animal diseases on the farm will directly impact global food security and safety as well as animal and human health. Insufficient attention has been given to the scientific breakthroughs and novel technologies that provide alternatives to antibiotics. The objectives of the symposium 'Alternatives to Antibiotics' were to highlight promising research results and novel technologies that could potentially lead to alternatives to conventional antibiotics, and assess challenges associated with their commercialization, and provide actionable strategies to support development of alternative antimicrobials. The symposium focused on the latest scientific breakthroughs and technologies that could provide new options and alternative strategies for preventing and treating diseases of animals. Some of these new technologies have direct applications as medical interventions for human health, but the focus of the symposium was animal production, animal health and food safety during food-animal production. Five subject areas were explored in detail through scientific presentations and expert panel discussions, including: (1) alternatives to antibiotics, lessons from nature; (2) immune modulation approaches to enhance disease resistance and to treat animal diseases; (3) gut microbiome and immune development, health and diseases; (4) alternatives to antibiotics for animal production; and (5) regulatory pathways to enable the licensure of alternatives to antibiotics.

Comparative epigenetics: relevance to the regulation of production and health traits in cattle.

PubMed

Doherty, Rachael; O' Farrelly, Cliona; Meade, Kieran G

2014-08-01

With the development of genomic, transcriptomic and bioinformatic tools, recent advances in molecular technologies have significantly impacted bovine bioscience research and are revolutionising animal selection and breeding. Integration of epigenetic information represents yet another challenging molecular frontier. Epigenetics is the study of biochemical modifications to DNA and to histones, the proteins that provide stability to DNA. These epigenetic changes are induced by environmental stimuli; they alter gene expression and are potentially heritable. Epigenetics research holds the key to understanding how environmental factors contribute to phenotypic variation in traits of economic importance in cattle including development, nutrition, behaviour and health. In this review, we discuss the potential applications of epigenetics in bovine research, using breakthroughs in human and murine research to signpost the way. © 2014 Stichting International Foundation for Animal Genetics.

Advanced components for spaceborne infrared astronomy

NASA Technical Reports Server (NTRS)

Davidson, A. W.

1984-01-01

The need for improved cryogenic components to be used in future spaceborne infrared astronomy missions was identified. Improved low noise cryogenic amplifiers operated with infrared detectors, and better cryogenic actuators and motors with extremely low power dissipation are needed. The feasibility of achieving technological breakthroughs in both of these areas was studied. An improved silicon junction field effect transistor (JFET) could be developed if: (1) high purity silicon; (2) optimum dopants; and (3) very high doping levels are used. The feasibility of a simple stepper motor equipped with superconducting coils is demonstrated by construction of such a device based on a standard commercial motor. It is found that useful levels of torque at immeasurably low power levels were achieved. It is concluded that with modest development and optimization efforts, significant performance gains is possible for both cryogenic preamplifiers and superconducting motors and actuators.

Monte Carlo Simulation of Soil Moisture Effects on Anti-Tank Landmines Detection by Neutron Backscattering Technique

NASA Astrophysics Data System (ADS)

Mowlawi, Ali Asghar; Yazdani, Majed

The detection of landmines using available technologies is a time consuming, expensive, and extremely dangerous job, so that there is a need for technological breakthroughs in this field. One of the safest and most effective technologies to landmine and explosive detection is the neutron backscattering technique. The slowing-down of fast neutrons to the thermal energy is a direct measure of the concentration of hydrogen, one of the main elements present in explosive materials. The elastic scattering of fast neutrons is affected by the strong resonances in the cross-section of the three other elements of explosives: nitrogen, oxygen, and carbon. In this work, Monte Carlo estimations of the soil moisture effects on landmine detection are presented.

Geospatial technology and the "exposome": new perspectives on addiction.

PubMed

Stahler, Gerald J; Mennis, Jeremy; Baron, David A

2013-08-01

Addiction represents one of the greatest public health problems facing the United States. Advances in addiction research have focused on the neurobiology of this disease. We discuss potential new breakthroughs in understanding the other side of gene-environment interactions-the environmental context or "exposome" of addiction. Such research has recently been made possible by advances in geospatial technologies together with new mobile and sensor computing platforms. These advances have fostered interdisciplinary collaborations focusing on the intersection of environment and behavior in addiction research. Although issues of privacy protection for study participants remain, these advances could potentially improve our understanding of initiation of drug use and relapse and help develop innovative technology-based interventions to improve treatment and continuing care services.

2 kV slanted tri-gate GaN-on-Si Schottky barrier diodes with ultra-low leakage current

NASA Astrophysics Data System (ADS)

Ma, Jun; Matioli, Elison

2018-01-01

This letter reports lateral GaN-on-Si power Schottky barrier diodes (SBDs) with unprecedented voltage-blocking performance by integrating 3-dimensionally a hybrid of tri-anode and slanted tri-gate architectures in their anode. The hybrid tri-anode pins the voltage drop at the Schottky junction (VSCH), despite a large applied reverse bias, fixing the reverse leakage current (IR) of the SBD. Such architecture led to an ultra-low IR of 51 ± 5.9 nA/mm at -1000 V, in addition to a small turn-on voltage (VON) of 0.61 ± 0.03 V. The slanted tri-gate effectively distributes the electric field in OFF state, leading to a remarkably high breakdown voltage (VBR) of -2000 V at 1 μA/mm, constituting a significant breakthrough from existing technologies. The approach pursued in this work reduces the IR and increases the VBR without sacrificing the VON, which provides a technology for high-voltage SBDs, and unveils the unique advantage of tri-gates for advanced power applications.

Electropolar effects on anaerobic fermentation of lignocellulosic materials in novel single-electrode cells.

PubMed

Qu, Guangfei; Qiu, Weixia; Liu, Yuhuan; Zhong, Dongwei; Ning, Ping

2014-05-01

As a promising renewable energy technology, anaerobic fermentation is consistently limited by low production and calorific value of biogas, along with the difficulty of lignocellulose degradation. The effects of polarity and micro-voltage on anaerobic fermentation from lignocellulosic materials were investigated in single-electrode fermenter to explore cost-efficient technology. The results illustrated that the biogas production and quality were significantly affected by electric polarity. And cathode-assisted fermentation led to more positive effects than anode-assisted. Compared with results in control group without electrode, the average biogas and methane yield under cathodic micro-voltage (-250 mV) were astonishingly improved by 2.82 and 2.44 mL g(-1)d(-1) respectively. Meanwhile, the degradation ratios of lignin and cellulose were also improved by 23.11% and 19.46%. It demonstrated that single micro-voltage can not only promote lignocellulose degradation but biogas production and calorific value. These micro-voltage effects on fermentation process also provided great opportunity to breakthrough the present limitation of lignocellulosic materials fermentation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Observational study to analyze patterns of treatment of breakthrough dyspnea in cancer patients in clinical practice.

PubMed

Cabezón-Gutiérrez, Luis; Delgado-Mingorance, Ignacio; Nabal-Vicuña, María; Jiménez-López, Antonio Javier; Cabezón-Álvarez, Ana; Soler-López, Begoña

2018-06-12

Although breakthrough dyspnea is very frequent in cancer patients, there are no precise recommendations for treating it. The main objective of this study was to analyze what treatments are used in clinical practice for the management of breakthrough dyspnea in cancer patients in Spain and the secondary objectives were to describe the characteristics of cancer patients with breakthrough dyspnea and the attributes of the disorder. Cancer patients over 18 years of age, with breakthrough dyspnea and a Karnofsky performance score of ≥30, who were treated at departments of oncology in institutes across Spain were included in this cross-sectional observational study. The characteristics of breakthrough dyspnea, history of treatment, anthropometric variables, Mahler dyspnea index, Borg scale, Edmonton Symptoms Assessment Scale, and patient satisfaction with current breakthrough dyspnea treatment were assessed. The mean age of the 149 included patients was 66 years (95% confidence interval: 64.3 to 67.9), and 53 were females (35.6%). The mean breakthrough dyspnea intensity was 5.85 (95% confidence interval 5.48 to 6.22, Borg scale). A total of 55.1% of the first-choice treatments consisted of opioids, followed by oxygen (17.3%). A total of 119 patients (79.9%) received monotherapy for breakthrough dyspnea. Patients presenting with basal dyspnea received oxygen in a greater proportion of cases (21.1% vs 7.4%; p = 0.07). Patients with predictable dyspnea received a greater proportion of opioids (70.9% vs 44.4%; p = 0.01). Opioids constitute first-line therapy for breakthrough dyspnea in routine clinical practice, though the scientific evidence supporting their use is scarce. Further information derived from controlled clinical trials is needed regarding the comparative efficacy of the different treatments in order to justify their use.

Advanced Materials for Space Applications

NASA Technical Reports Server (NTRS)

Pater, Ruth H.; Curto, Paul A.

2005-01-01

Since NASA was created in 1958, over 6400 patents have been issued to the agency--nearly one in a thousand of all patents ever issued in the United States. A large number of these inventions have focused on new materials that have made space travel and exploration of the moon, Mars, and the outer planets possible. In the last few years, the materials developed by NASA Langley Research Center embody breakthroughs in performance and properties that will enable great achievements in space. The examples discussed below offer significant advantages for use in small satellites, i.e., those with payloads under a metric ton. These include patented products such as LaRC SI, LaRC RP 46, LaRC RP 50, PETI-5, TEEK, PETI-330, LaRC CP, TOR-LM and LaRC LCR (patent pending). These and other new advances in nanotechnology engineering, self-assembling nanostructures and multifunctional aerospace materials are presented and discussed below, and applications with significant technological and commercial advantages are proposed.

Hand Hygiene Improvement and Sustainability: Assessing a Breakthrough Collaborative in Western Switzerland.

PubMed

Staines, Anthony; Amherdt, Isabelle; Lécureux, Estelle; Petignat, Christiane; Eggimann, Philippe; Schwab, Marcos; Pittet, Didier

2017-12-01

OBJECTIVE To assess hand hygiene improvement and sustainability associated with a Breakthrough Collaborative. DESIGN Multicenter analysis of hand hygiene compliance through direct observation by trained observers. SETTING A total of 5 publicly funded hospitals in 14 locations, with a total of 1,152 beds, in the County of Vaud, Switzerland. PARTICIPANTS Clinical staff. INTERVENTIONS In total, 59,272 opportunities for hand hygiene were monitored for the duration of the study, for an average of 5,921 per audit (range, 5,449-6,852). An 18-month Hand Hygiene Breakthrough Collaborative was conducted to implement the WHO multimodal promotional strategy including improved access to alcohol-based hand rub, education, performance measurement and feedback, reminders and communication, leadership engagement, and safety culture. RESULTS Overall hand hygiene compliance improved from 61.9% to 88.3% (P<.001) over 18 months and was sustained at 88.9% (P=.248) 12 months after the intervention. Hand hygiene compliance among physicians increased from 62% to 85% (P<.001) and finally 86% at follow-up (P=.492); for nursing staff, compliance improved from 64% to 90% (P<.001) and finally 90% at follow-up (P=.464); for physiotherapists compliance improved from 50% to 90% (P<.001) and finally 91% at follow-up (P=.619); for X-ray technicians compliance improved from 45% to 80% (P<.001) and finally 81% at follow-up (P=.686). Hand hygiene compliance also significantly increased with sustained improvement across all hand hygiene indications and all hospitals. CONCLUSIONS A rigorously conducted multicenter project combining the Breakthrough Collaborative method for its structure and the WHO multimodal strategy for content and measurement was associated with significant and substantial improvement in compliance across all professions, all hand hygiene indications, and all participating hospitals. Infect Control Hosp Epidemiol 2017;38:1420-1427.

[Breakthrough pain treatment with sublingual fentanyl in patients with chronic cutaneous ulcers].

PubMed

Domingo-Triadó, V; López Alarcón, M D; Villegas Estévez, F; Alba Moratillas, C; Massa Domínguez, B; Palomares Payá, F; Mínguez Martí, A; Debón Vicent, L

2014-10-01

The aim of the study was to assess the efficacy and safety of opioids in the management of pain in those patients with chronic cutaneous ulcers and breakthrough/incidental pain. An open-label, multicentre, prospective, uncontrolled study was conducted in the pain and ulcer units of 5 hospitals across the Comunidad Valenciana. Eligibility criteria were baseline pain 4 in the visual analogue scale or breakthrough procedural pain 4. Exclusion criteria were cognitive impairment, opioid intolerance, or patient refusal to provide informed consent. The protocol scheduled 5 controls: baseline (enrolment), 15 days, one month, 2 months, and 3 months. The main outcome measure of the study was the visual analogue scale score during rest, movement and procedures. Opioids were administered for release of the baseline pain, and sublingual fentanyl for breakthrough pain. A total of 32 patients (86.5%) completed the study. Baseline pain achieved a mean improvement of 3.6 visual analogue scale points (SD 2.3), movement pain improved by 3.9 points (SD 2.5) and procedural pain improved by 4.5 points (SD 2.8), and the mean pain intensity improvement was statistically significant from the first control and at all controls thereafter (P<.001). Nausea was reported by 14 patients (43.8%), drowsiness and constipation by 7 (21.9%), itching by 5 (15.6%), and one (3.1%) reported vomiting. Structured assessment of pain is a key concept in the management of patient with chronic cutaneous ulcers. The results of this study suggest that opioid therapy provides clinically significant pain relief with few adverse effects. Copyright © 2013 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Published by Elsevier España. All rights reserved.

Breakthrough Listen - A New Search for Life in the Universe

NASA Astrophysics Data System (ADS)

Worden, Pete

On July 20, 2015 Yuri Milner and Stephen Hawking announced a new set of scientific initiatives - a SETI search called Breakthrough Listen and a contest to devise potential messages in response to a detection entitled Breakthrough Message. These are the first of several privately-funded Breakthrough Initiatives, designed to answer the fundamental science questions surrounding the origin, extent and nature of life in the universe. The initiatives are managed by the Breakthrough Prize Foundation. With Breakthrough Listen, Radio SETI observations have begun at the Green Bank Radio Telescope (GBT) and optical SETI at the Lick Observatory Automated Planet Finder (APF). Observations will soon commence at the CSIRO Parkes Radio Telescope. Other SETI instruments and observations are under consideration. In addition, several other initiatives are under development including an expanded search for life in the universe.

Prevalence and characteristics of breakthrough pain in opioid-treated patients with chronic noncancer pain.

PubMed

Portenoy, Russell K; Bennett, Daniel S; Rauck, Richard; Simon, Steven; Taylor, Donald; Brennan, Michael; Shoemaker, Steven

2006-08-01

Breakthrough pain is well-characterized in cancer patients but not in patients with chronic noncancer pain. We recruited 228 patients with diverse types of chronic noncancer pain from 9 pain programs and administered a telephone questionnaire with a breakthrough pain assessment algorithm originally designed for cancer patients. All patients had controlled baseline pain, and 168 (74%) experienced severe to excruciating breakthrough pain. Among those with breakthrough pain, the most common syndrome was low back pain (52%), and the underlying pathophysiology was variably characterized as somatic (38%), neuropathic (18%), visceral (4%), or mixed (40%). A total of 189 different types of breakthrough pain were reported. The median number of episodes per day was 2 (range, <1 to 12). Median time to maximum intensity was 10 minutes (range, 0 to 180 minutes). Median duration of the breakthrough pain was 60 minutes (range, 1 to 720 minutes). Patients identified a precipitant for 69% of pains, and 92% of these were activity-related. Onset could never be predicted for 45% of pains and only sometimes predicted for 31% of pains. Breakthrough pain is highly prevalent and varied in this population. Further studies are warranted to clarify whether the clinical impact and therapeutic challenges posed by this phenomenon are comparable to the cancer population. This article presents results from a survey that demonstrates that breakthrough pain is highly prevalent and varied in opioid-treated patients with chronic noncancer pain. These findings will assist clinicians in assessing and managing this type of pain.

The Future of Low-Carbon Electricity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenblatt, Jeffery B.; Brown, Nicholas R.; Slaybaugh, Rachel

Here, we review future global demand for electricity and major technologies positioned to supply itwith minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal and biomass), nuclear fission, and fossil power with CO 2 capture and sequestration. Two breakthrough technologies (space solar power and nuclear fusion) are discussed as exciting but uncertain additional options for low net GHG emissions (“low-carbon”) electricity generation. Grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes) are also discussed. For each topic, recent historical trends and future prospects are reviewed,more » along with technical challenges, costs and other issues as appropriate. While no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.« less

The Future of Low-Carbon Electricity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenblatt, Jeffery B.; Brown, Nicholas R.; Slaybaugh, Rachel

We review future global demand for electricity and major technologies positioned to supply it with minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal, and biomass), nuclear fission, and fossil power with CO2 capture and sequestration. We discuss two breakthrough technologies (space solar power and nuclear fusion) as exciting but uncertain additional options for low-net GHG emissions (i.e., low-carbon) electricity generation. In addition, we discuss grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes). For each topic, recent historical trends and future prospects are reviewed,more » along with technical challenges, costs, and other issues as appropriate. Although no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.« less

The Future of Low-Carbon Electricity

DOE PAGES

Greenblatt, Jeffery B.; Brown, Nicholas R.; Slaybaugh, Rachel; ...

2017-07-10

Here, we review future global demand for electricity and major technologies positioned to supply itwith minimal greenhouse gas (GHG) emissions: renewables (wind, solar, water, geothermal and biomass), nuclear fission, and fossil power with CO 2 capture and sequestration. Two breakthrough technologies (space solar power and nuclear fusion) are discussed as exciting but uncertain additional options for low net GHG emissions (“low-carbon”) electricity generation. Grid integration technologies (monitoring and forecasting of transmission and distribution systems, demand-side load management, energy storage, and load balancing with low-carbon fuel substitutes) are also discussed. For each topic, recent historical trends and future prospects are reviewed,more » along with technical challenges, costs and other issues as appropriate. While no technology represents an ideal solution, their strengths can be enhanced by deployment in combination, along with grid integration that forms a critical set of enabling technologies to assure a reliable and robust future low-carbon electricity system.« less

Key participants in codeveloped technology pose for group picture

NASA Technical Reports Server (NTRS)

1997-01-01

Following the presentation of the Universal Signal Conditioning Amplifier (USCA), a new piece of technology developed through a National Aeronautics and Space Administration (NASA) partnership with industry, to Kennedy Space Center (KSC) Director Roy Bridges, Jr., key participants in the partnership pose for a group portrait. They are (from left) Bill Larson, NASA; Dr. Pedro Medelius, INET; Roy Bridges, Jr., KSC Director; Ed Gladney and William Saputo, L-3 Communications; Pam Gillespi, representing Congressman Dave Weldon; and Frank Kinney, Technological Research and Development Authority. The USCA is a key component of the codeveloped Automated Data Acquisition System (ADAS) that measures temperature, pressure and vibration at KSC's launch pads. The breakthrough technology is expected to reduce sensor setup and configuration times from hours to seconds. KSC teamed up with Florida's Technological Research and Development Authority and manufacturer L-3 Communications to produce a system that would benefit the aerospace industry and other commercial markets.

Challenges to the introduction of new technologies to dental practice.

PubMed

Barnett, Michael L

2006-01-01

Despite promising breakthroughs in basic biomedical science, the pace at which innovative and disruptive new technologies are developed and introduced into dental practice lags behind that of medicine. This is largely a result of resource issues, both financial and human, as well as determinants in the marketplace. For example, the cost of developing a new drug or technology for dentistry and bringing it to market is often disproportionably high relative to the size of the dental market, thereby making it commercially unfeasible to pursue development. When a new technology is commercialized, its successful introduction can be facilitated by research that makes a compelling case for effective use. As our understanding of mechanisms of disease pathogenesis progresses, identifying compounds and technologies with applicability to both oral and systemic diseases could change the economics of dental product development and lead to additional innovative advances in our field.

Comprehensive sieve analysis of breakthrough HIV-1 sequences in the RV144 vaccine efficacy trial.

PubMed

Edlefsen, Paul T; Rolland, Morgane; Hertz, Tomer; Tovanabutra, Sodsai; Gartland, Andrew J; deCamp, Allan C; Magaret, Craig A; Ahmed, Hasan; Gottardo, Raphael; Juraska, Michal; McCoy, Connor; Larsen, Brendan B; Sanders-Buell, Eric; Carrico, Chris; Menis, Sergey; Kijak, Gustavo H; Bose, Meera; Arroyo, Miguel A; O'Connell, Robert J; Nitayaphan, Sorachai; Pitisuttithum, Punnee; Kaewkungwal, Jaranit; Rerks-Ngarm, Supachai; Robb, Merlin L; Kirys, Tatsiana; Georgiev, Ivelin S; Kwong, Peter D; Scheffler, Konrad; Pond, Sergei L Kosakovsky; Carlson, Jonathan M; Michael, Nelson L; Schief, William R; Mullins, James I; Kim, Jerome H; Gilbert, Peter B

2015-02-01

The RV144 clinical trial showed the partial efficacy of a vaccine regimen with an estimated vaccine efficacy (VE) of 31% for protecting low-risk Thai volunteers against acquisition of HIV-1. The impact of vaccine-induced immune responses can be investigated through sieve analysis of HIV-1 breakthrough infections (infected vaccine and placebo recipients). A V1/V2-targeted comparison of the genomes of HIV-1 breakthrough viruses identified two V2 amino acid sites that differed between the vaccine and placebo groups. Here we extended the V1/V2 analysis to the entire HIV-1 genome using an array of methods based on individual sites, k-mers and genes/proteins. We identified 56 amino acid sites or "signatures" and 119 k-mers that differed between the vaccine and placebo groups. Of those, 19 sites and 38 k-mers were located in the regions comprising the RV144 vaccine (Env-gp120, Gag, and Pro). The nine signature sites in Env-gp120 were significantly enriched for known antibody-associated sites (p = 0.0021). In particular, site 317 in the third variable loop (V3) overlapped with a hotspot of antibody recognition, and sites 369 and 424 were linked to CD4 binding site neutralization. The identified signature sites significantly covaried with other sites across the genome (mean = 32.1) more than did non-signature sites (mean = 0.9) (p < 0.0001), suggesting functional and/or structural relevance of the signature sites. Since signature sites were not preferentially restricted to the vaccine immunogens and because most of the associations were insignificant following correction for multiple testing, we predict that few of the genetic differences are strongly linked to the RV144 vaccine-induced immune pressure. In addition to presenting results of the first complete-genome analysis of the breakthrough infections in the RV144 trial, this work describes a set of statistical methods and tools applicable to analysis of breakthrough infection genomes in general vaccine efficacy trials for diverse pathogens.

Comprehensive Sieve Analysis of Breakthrough HIV-1 Sequences in the RV144 Vaccine Efficacy Trial

PubMed Central

Edlefsen, Paul T.; Rolland, Morgane; Hertz, Tomer; Tovanabutra, Sodsai; Gartland, Andrew J.; deCamp, Allan C.; Magaret, Craig A.; Ahmed, Hasan; Gottardo, Raphael; Juraska, Michal; McCoy, Connor; Larsen, Brendan B.; Sanders-Buell, Eric; Carrico, Chris; Menis, Sergey; Bose, Meera; Arroyo, Miguel A.; O’Connell, Robert J.; Nitayaphan, Sorachai; Pitisuttithum, Punnee; Kaewkungwal, Jaranit; Rerks-Ngarm, Supachai; Robb, Merlin L.; Kirys, Tatsiana; Georgiev, Ivelin S.; Kwong, Peter D.; Scheffler, Konrad; Pond, Sergei L. Kosakovsky; Carlson, Jonathan M.; Michael, Nelson L.; Schief, William R.; Mullins, James I.; Kim, Jerome H.; Gilbert, Peter B.

2015-01-01

The RV144 clinical trial showed the partial efficacy of a vaccine regimen with an estimated vaccine efficacy (VE) of 31% for protecting low-risk Thai volunteers against acquisition of HIV-1. The impact of vaccine-induced immune responses can be investigated through sieve analysis of HIV-1 breakthrough infections (infected vaccine and placebo recipients). A V1/V2-targeted comparison of the genomes of HIV-1 breakthrough viruses identified two V2 amino acid sites that differed between the vaccine and placebo groups. Here we extended the V1/V2 analysis to the entire HIV-1 genome using an array of methods based on individual sites, k-mers and genes/proteins. We identified 56 amino acid sites or “signatures” and 119 k-mers that differed between the vaccine and placebo groups. Of those, 19 sites and 38 k-mers were located in the regions comprising the RV144 vaccine (Env-gp120, Gag, and Pro). The nine signature sites in Env-gp120 were significantly enriched for known antibody-associated sites (p = 0.0021). In particular, site 317 in the third variable loop (V3) overlapped with a hotspot of antibody recognition, and sites 369 and 424 were linked to CD4 binding site neutralization. The identified signature sites significantly covaried with other sites across the genome (mean = 32.1) more than did non-signature sites (mean = 0.9) (p < 0.0001), suggesting functional and/or structural relevance of the signature sites. Since signature sites were not preferentially restricted to the vaccine immunogens and because most of the associations were insignificant following correction for multiple testing, we predict that few of the genetic differences are strongly linked to the RV144 vaccine-induced immune pressure. In addition to presenting results of the first complete-genome analysis of the breakthrough infections in the RV144 trial, this work describes a set of statistical methods and tools applicable to analysis of breakthrough infection genomes in general vaccine efficacy trials for diverse pathogens. PMID:25646817

On the Limitations of Breakthrough Curve Analysis in Fixed-Bed Adsorption

NASA Technical Reports Server (NTRS)

Knox, James C.; Ebner, Armin D.; LeVan, M. Douglas; Coker, Robert F.; Ritter, James A.

2016-01-01

This work examined in detail the a priori prediction of the axial dispersion coefficient from available correlations versus obtaining it and also mass transfer information from experimental breakthrough data and the consequences that may arise when doing so based on using a 1-D axially dispersed plug flow model and its associated Danckwerts outlet boundary condition. These consequences mainly included determining the potential for erroneous extraction of the axial dispersion coefficient and/or the LDF mass transfer coefficient from experimental data, especially when non-plug flow conditions prevailed in the bed. Two adsorbent/adsorbate cases were considered, i.e., carbon dioxide and water vapor in zeolite 5A, because they both experimentally exhibited significant non-plug flow behavior, and the water-zeolite 5A system exhibited unusual concentration front sharpening that destroyed the expected constant pattern behavior (CPB) when modeled with the 1-D axially dispersed plug flow model. Overall, this work showed that it was possible to extract accurate mass transfer and dispersion information from experimental breakthrough curves using a 1-D axial dispersed plug flow model when they were measured both inside and outside the bed. To ensure the extracted information was accurate, the inside the bed breakthrough curves and their derivatives from the model were plotted to confirm whether or not the adsorbate/adsorbent system was exhibiting CPB or any concentration front sharpening near the bed exit. Even when concentration front sharpening was occurring with the water-zeolite 5A system, it was still possible to use the experimental inside and outside the bed breakthrough curves to extract fundamental mass transfer and dispersion information from the 1-D axial dispersed plug flow model based on the systematic methodology developed in this work.

Fixed-bed operation for manganese removal from water using chitosan/bentonite/MnO composite beads.

PubMed

Muliwa, Anthony M; Leswifi, Taile Y; Maity, Arjun; Ochieng, Aoyi; Onyango, Maurice S

2018-04-24

In the present study, a new composite adsorbent, chitosan/bentonite/manganese oxide (CBMnO) beads, cross-linked with tetraethyl-ortho-silicate (TEOS) was applied in a fixed-bed column for the removal of Mn (II) from water. The adsorbent was characterised by scanning electron microscopy (SEM), Fourier transform infra-red (FT-IR), N 2 adsorption-desorption and X-ray photoelectron spectroscopy (XPS) techniques, and moreover the point of zero charge (pH pzc ) was determined. The extend of Mn (II) breakthrough behaviour was investigated by varying bed mass, flow rate and influent concentration, and by using real environmental water samples. The dynamics of the column showed great dependency of breakthrough curves on the process conditions. The breakthrough time (t b ), bed exhaustion time (t s ), bed capacity (q e ) and the overall bed efficiency (R%) increased with an increase in bed mass, but decreased with the increase in both influent flow rate and concentration. Non-linear regression suggested that the Thomas model effectively described the breakthrough curves while large-scale column performance could be estimated by the bed depth service time (BDST) model. Experiments with environmental water revealed that coexisting ions had little impact on Mn (II) removal, and it was possible to achieve 6.0 mg/g breakthrough capacity (q b ), 4.0 L total treated water and 651 bed volumes processed with an initial concentration of 38.5 mg/L and 5.0 g bed mass. The exhausted bed could be regenerated with 0.001 M nitric acid solution within 1 h, and the sorbent could be reused twice without any significant loss of capacity. The findings advocate that CBMnO composite beads can provide an efficient scavenging pathway for Mn (II) in polluted water.

On the Genealogy of Tissue Engineering and Regenerative Medicine

PubMed Central

2015-01-01

In this article, we identify and discuss a timeline of historical events and scientific breakthroughs that shaped the principles of tissue engineering and regenerative medicine (TERM). We explore the origins of TERM concepts in myths, their application in the ancient era, their resurgence during Enlightenment, and, finally, their systematic codification into an emerging scientific and technological framework in recent past. The development of computational/mathematical approaches in TERM is also briefly discussed. PMID:25343302

Transforming Training: A Perspective on the Need and Payoffs from Common Standards

DTIC Science & Technology

2006-12-01

position the training research community on the eve of a scientific breakthrough. In the near future, the scientific community will likely benefit from...is likely to benefit from this ability to routinely cross-compare training technologies and techniques from laboratory training study results...concluding with a logical end such as " Bingo " (nearly out of fuel), all threats killed, or multiple friendly losses. While these training sessions

The National Shipbuilding Research Program. Environmental Studies and Testing (Phase V)

DTIC Science & Technology

2000-11-20

development of an analytical procedure for toxic organic compounds, including TBT ( tributyltin ), whose turnaround time would be in the order of minutes...Cost of the Subtask was $20,000. Subtask #33 - Turnaround Analytical Method for TBT This Subtask performed a preliminary investigation leading to the...34Quick TBT Analytical Method" that will yield reliable results in 15 minutes, a veritable breakthrough in sampling technology. The Subtask was managed by

On the genealogy of tissue engineering and regenerative medicine.

PubMed

Kaul, Himanshu; Ventikos, Yiannis

2015-04-01

In this article, we identify and discuss a timeline of historical events and scientific breakthroughs that shaped the principles of tissue engineering and regenerative medicine (TERM). We explore the origins of TERM concepts in myths, their application in the ancient era, their resurgence during Enlightenment, and, finally, their systematic codification into an emerging scientific and technological framework in recent past. The development of computational/mathematical approaches in TERM is also briefly discussed.

A breakthrough for experiencing and understanding simulated physics

NASA Technical Reports Server (NTRS)

Watson, Val

1988-01-01

The use of computer simulation in physics research is discussed, focusing on improvements to graphic workstations. Simulation capabilities and applications of enhanced visualization tools are outlined. The elements of an ideal computer simulation are presented and the potential for improving various simulation elements is examined. The interface between the human and the computer and simulation models are considered. Recommendations are made for changes in computer simulation practices and applications of simulation technology in education.

Additive manufacturing technology in reconstructive surgery.

PubMed

Fuller, Scott C; Moore, Michael G

2016-10-01

Technological advances have been part and parcel of modern reconstructive surgery, in that practitioners of this discipline are continually looking for innovative ways to perfect their craft and improve patient outcomes. We are currently in a technological climate wherein advances in computers, imaging, and science have coalesced with resulting innovative breakthroughs that are not merely limited to improved outcomes and enhanced patient care, but may provide novel approaches to training the next generation of reconstructive surgeons. New developments in software and modeling platforms, imaging modalities, tissue engineering, additive manufacturing, and customization of implants are poised to revolutionize the field of reconstructive surgery. The interface between technological advances and reconstructive surgery continues to expand. Additive manufacturing techniques continue to evolve in an effort to improve patient outcomes, decrease operative time, and serve as instructional tools for the training of reconstructive surgeons.

Directions of improving information system of insurance company

NASA Astrophysics Data System (ADS)

Kaigorodova, G. N.; Mustafina, A. A.; Alyakina, D. P.

2018-05-01

The article presents a study of the information technologies impact on the insurance industry development. At present, any business, especially business in the field of financial intermediation, can count on maintaining its positions only as a technology company. For the insurance business it is now especially important. Other segments of the financial market - the stock and credit market - are actively developing and applying IT-technologies. The insurance business at present is getting opportunities for a technological breakthrough. There is a growing demand for traditional insurance products - property insurance, motor insurance, health insurance. There is a rapidly growing demand for life insurance and insurance against cyber risks. To implement insurance protection in new conditions, the insurance company should actively use information systems. The article presents a possible variant of systematization of the insurer's business processes within the information system of the insurance company.

The technology behind Colgate Total Advanced Fresh.

PubMed

Williams, Malcolm I; Cummins, Diane

2003-09-01

In the early 1990s, a breakthrough toothpaste, Colgate Total, was launched with documented long-lasting activity against plaque, gingivitis, calculus, tooth decay, and bad breath. The technology behind this toothpaste is the combination of triclosan, a polyvinylmethylether/maleic acid copolymer, and sodium fluoride. The copolymer ensures maximal oral retention and subsequent release of the antibacterial triclosan. Effective levels of triclosan have been observed in the oral cavity 12 hours after brushing the teeth, allowing prolonged control of oral bacteria that may cause the most common dental problems, including bad breath. Similarly, the enhanced retention of triclosan to oral surfaces after using this revolutionary toothpaste for up to 2 years has led to significantly reduced incremental coronal caries compared to an American Dental Association-Approved anticavity fluoride toothpaste. Furthermore, significantly less calcium remained in dental plaque after brushing the teeth with the triclosan/copolymer toothpaste, resulting in the formation of less tartar. In keeping with the multiple oral health benefits provided by Colgate Total, consumers are now offered a new dentifrice, Colgate Total Advanced Fresh, which provides the numerous therapeutic and esthetic benefits that are the hallmark of Colgate Total. The new dentifrice, which contains an impactful breath-freshening flavor, has been documented to provide sustained control of bad breath over 12 hours.

KSC-02pd1480

NASA Image and Video Library

2002-10-08

KENNEDY SPACE CENTER, FLA. - Adam Kissiah (right), a retired NASA-KSC engineer, looks at a photo of Allan Dianic's daughter, who has benefited from a cochlear implant that Kissiah developed while at NASA. Dianic (left) is a software engineer with ENSCO. Kissiah received an exceptional category NASA Space Act Award for his 25-year-old technology breakthrough during a technology awards luncheon held at the KSC Visitor Complex Debus Center. The award included a monetary award and a certificate signed by the NASA Administrator. Space Act Awards provide official recognition and grant equitable monetary awards for inventions and scientific and technical contributions that have helped achieve NASA's aeronautical and space goals.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nabeel, A.; Khan, M.A.; Husain, S.

Coal is the most abundant source of energy. However, there is a need to develop cleaner, and more efficient, economical, and convenient coal conversion technologies. It is important to understand the organic chemical structure of coal for achieving real breakthroughs in the development of such coal conversion technologies. A novel computer-assisted modeling technique based on the analysis of {sup 13}C NMR and gel permeation chromatography has been applied to predict the average molecular structure of the acetylated product of a depolymerized bituminous Indian coal. The proposed molecular structure may be of practical use in understanding the mechanism of coal conversionsmore » during the processes of liquefaction, gasification, combustion, and carbonization.« less

Cancer inpatients morphine usage: a new England area survey.

PubMed

Trollor, John

2003-08-01

This is a one year study of the use of morphine in cancer patients in 10 inpatient facilities in the New England Area Health Service in the north-west of New South Wales. The study explored 170 admissions relating to 122 patients, most of whom were cared for by their general practitioners. The use of morphine in these cancer patients was compared with the recommendations made by the expert working group of the European Association of Palliative Care.1 Those items which matched the recommendations included the initial doses for new users of morphine and the subcutaneous route being the preferred parenteral route. The data in this study differed from the recommendations in that only half of the patients received the immediate release morphine when first given oral morphine, only 43% had orders for immediate release oral morphine for breakthrough pain (with a variable frequency) and a significant number of orders for parenteral and immediate release oral morphine for breakthrough pain were outside the recommended doses (100% and 86.2%, respectively). Written orders for immediate release oral and parenteral morphine involved a dose range in significant numbers while only 30% of patients had orders for parenteral morphine for breakthrough pain. There was a low use of fixed interval variable dose (FIVD) morphine charts despite these being available in most facilities.

[Virtual reality in medical education].

PubMed

Edvardsen, O; Steensrud, T

1998-02-28

Virtual reality technology has found new applications in industry over the last few years. Medical literature has for several years predicted a break-through in this technology for medical education. Although there is a great potential for this technology in medical education, there seems to be a wide gap between expectations and actual possibilities at present. State of the technology was explored by participation at the conference "Medicine meets virtual reality V" (San Diego Jan. 22-25 1997) and a visit to one of the leading laboratories on virtual reality in medical education. In this paper we introduce some of the basic terminology and technology, review some of the topics covered by the conference, and describe projects running in one of the leading laboratories on virtual reality technology for medical education. With this information in mind, we discuss potential applications of the current technology in medical education. Current virtual reality systems are judged to be too costly and their usefulness in education too limited for routine use in medical education.

Neural Coding for Effective Rehabilitation

PubMed Central

2014-01-01

Successful neurological rehabilitation depends on accurate diagnosis, effective treatment, and quantitative evaluation. Neural coding, a technology for interpretation of functional and structural information of the nervous system, has contributed to the advancements in neuroimaging, brain-machine interface (BMI), and design of training devices for rehabilitation purposes. In this review, we summarized the latest breakthroughs in neuroimaging from microscale to macroscale levels with potential diagnostic applications for rehabilitation. We also reviewed the achievements in electrocorticography (ECoG) coding with both animal models and human beings for BMI design, electromyography (EMG) interpretation for interaction with external robotic systems, and robot-assisted quantitative evaluation on the progress of rehabilitation programs. Future rehabilitation would be more home-based, automatic, and self-served by patients. Further investigations and breakthroughs are mainly needed in aspects of improving the computational efficiency in neuroimaging and multichannel ECoG by selection of localized neuroinformatics, validation of the effectiveness in BMI guided rehabilitation programs, and simplification of the system operation in training devices. PMID:25258708

The Challenge to Create the Space Drive

NASA Technical Reports Server (NTRS)

Millis, Marc G.

1999-01-01

To travel to our neighboring stars as practically as envisioned by science fiction, breakthroughs in science are required. One of these breakthroughs is to discover a self-contained means of propulsion that requires no propellant. To chart a path toward such a discovery, seven hypothetical space drives are presented to illustrate the specific unsolved challenges and associated research objectives toward this ambition. One research objective is to discover a means to asymmetrically interact with the electromagnetic fluctuations of the vacuum. Another is to develop a physics that describes inertia, gravity, or the properties of spacetime as a function of electromagnetics that leads to using electromagnetic technology for inducing propulsive forces. Another is to determine if negative mass exists or if its properties can be synthesized. An alternative approach that covers the possibility that negative mass might not exist is to develop a formalism of Mach's Principle or reformulate ether concepts to lay a foundation for addressing reaction forces and conservation of momentum with space drives.

Challenge to Create the Space Drive

NASA Technical Reports Server (NTRS)

Millis, Marc G.

1997-01-01

To travel to our neighboring stars as practically as envisioned by science fiction, breakthroughs in science are required. One of these breakthroughs is to discover a self-contained means of propulsion that requires no propellant. To chart a path toward such a discovery, seven hypothetical space drives are presented to illustrate the specific unsolved challenges and associated research objectives toward this ambition. One research objective is to discover a means to asymmetrically interact with the electromagnetic fluctuations of the vacuum. Another is to develop a physics that describes inertia, gravity, or the properties of space-time as a function of electromagnetics that leads to using electromagnetic technology for inducing propulsive forces. Another is to determine if negative mass exists or if its properties can be synthesized. An alternative approach that covers the possibility that negative mass might not exist is to develop a formalism of Mach's principle or reformulate ether concepts to lay a foundation for addressing reaction forces and conservation of momentum with space drives.

The challenge to create the space drive

NASA Technical Reports Server (NTRS)

Millis, Marc G.

1996-01-01

To travel to our neighboring stars as practically as envisioned by science fiction, breakthroughs in science are required. One of these breakthroughs is to discover a self-contained means of propulsion that requires no propellant. To chart a path toward such a discovery, seven hypothetical space drives are presented to illustrate the specific unsolved challenges and associated research objectives toward this ambition. One research objective is to discover a means to asymmetrically interact with the electro-magnetic fluctuations of the vacuum. Another is to develop a physics that describes inertia, gravity, or the properties of spacetime as a function of electro-magnetics that leads to using electro-magnetic technology for inducing propulsive forces. Another is to determine if negative mass exists or if its properties can be synthesized. An alternative approach that covers the possibility that negative mass might not exist is to develop a formalism of Mach's Principle or re-formulate ether concepts to lay a foundation for addressing reaction forces and conservation of momentum with space drives.

Breakthrough in Xenon Capture and Purification Using Adsorbent-Supported Silver Nanoparticles.

PubMed

Deliere, Ludovic; Coasne, Benoit; Topin, Sylvain; Gréau, Claire; Moulin, Christophe; Farrusseng, David

2016-07-04

Rare gas capture and purification is a major challenge for energy, environment, and health applications. Of utmost importance for the nuclear industry, novel separation processes for Xe are urgently needed for spent nuclear fuel reprocessing and nuclear activity monitoring. The recovered, non-radioactive Xe is also of high economic value for lighting, surgical anesthetic, etc. Here, using adsorption and breakthrough experiments and statistical mechanics molecular simulation, we show the outstanding performance of zeolite-supported silver nanoparticles to capture/separate Xe at low concentrations (0.087-100 ppm). We also establish the efficiency of temperature swing adsorption based on such adsorbents for Xe separation from Kr/Xe mixtures and air streams corresponding to off-gases generated by nuclear reprocessing. This study paves the way for the development of novel, cost-efficient technologies relying on the large selectivity/capacity of adsorbent-supported silver nanoparticles which surpass all materials ever tested. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Breakthrough cancer pain – still a challenge

PubMed Central

Margarit, Cesar; Juliá, Joaquim; López, Rafael; Anton, Antonio; Escobar, Yolanda; Casas, Ana; Cruz, Juan Jesús; Galvez, Rafael; Mañas, Ana; Zaragozá, Francisco

2012-01-01

Breakthrough cancer pain is defined as transient pain exacerbation in patients with stable and controlled basal pain. Although variable, the prevalence of breakthrough cancer pain is high (33%–95%). According to the American Pain Foundation, breakthrough pain is observed in 50%–90% of all hospitalized cancer patients, in 89% of all patients admitted to homes for the elderly and terminal-patient care centers, and in 35% of all ambulatory care cancer patients. The management of breakthrough cancer pain should involve an interdisciplinary and multimodal approach. The introduction of new fentanyl formulations has represented a great advance and has notably improved treatment. Among these, the pectin-based intranasal formulation adjusts very well to the profile of breakthrough pain attacks, is effective, has a good toxicity profile, and allows for convenient dosing – affording rapid and effective analgesia with the added advantage of being easily administered by caregivers when patients are unable to collaborate. PMID:23204865

An update on radiation therapy in head and neck cancers.

PubMed

Mazzola, Rosario; Fiorentino, Alba; Ricchetti, Francesco; Gregucci, Fabiana; Corradini, Stefanie; Alongi, Filippo

2018-04-01

Technological and technical improvements allowed for significant advances in the field of radiation therapy (RT) of head and neck cancer (HNC). Several organ-sparing strategies have been investigated with the objective to decrease acute and long-term adverse effects and, subsequently, to assure a better quality of life in patients affected by HNC. In this context, intensity modulated irradiation and the use of multimodality-imaging could help clinicians to obtain a rapid dose fall off towards surrounding healthy tissues and a better delineation of targets volumes and organs at risk. Areas covered: A literature review was performed with the aim to offer an update on radiation therapy in HNC. Expert commentary: During these last years, radiation oncologists have observed a continuous changing regarding radiation treatment for HNC. The adoption of intensity-modulated RT (IMRT) and the use of multimodality-imaging for tumor volume definition and organs at risk or delineation have improved the clinical outcomes of HNC patients. In the future, a better integration of functional imaging for target volume delineation as well as adaptive delivery strategies will allow to further personalize radiation oncology in HNC. Furthermore, the latest breakthrough technologies, such as magnetic resonance imaging (MRI)-linacs and heavy particles technologies have a great potential to improve treatment-related quality of life in HNC. Future studies are needed to demonstrate the clinical advantages of these new RT technologies in HNC.

3-D Technology Approaches for Biological Ecologies

NASA Astrophysics Data System (ADS)

Liu, Liyu; Austin, Robert; U. S-China Physical-Oncology Sciences Alliance (PS-OA) Team

Constructing three dimensional (3-D) landscapes is an inevitable issue in deep study of biological ecologies, because in whatever scales in nature, all of the ecosystems are composed by complex 3-D environments and biological behaviors. Just imagine if a 3-D technology could help complex ecosystems be built easily and mimic in vivo microenvironment realistically with flexible environmental controls, it will be a fantastic and powerful thrust to assist researchers for explorations. For years, we have been utilizing and developing different technologies for constructing 3-D micro landscapes for biophysics studies in in vitro. Here, I will review our past efforts, including probing cancer cell invasiveness with 3-D silicon based Tepuis, constructing 3-D microenvironment for cell invasion and metastasis through polydimethylsiloxane (PDMS) soft lithography, as well as explorations of optimized stenting positions for coronary bifurcation disease with 3-D wax printing and the latest home designed 3-D bio-printer. Although 3-D technologies is currently considered not mature enough for arbitrary 3-D micro-ecological models with easy design and fabrication, I hope through my talk, the audiences will be able to sense its significance and predictable breakthroughs in the near future. This work was supported by the State Key Development Program for Basic Research of China (Grant No. 2013CB837200), the National Natural Science Foundation of China (Grant No. 11474345) and the Beijing Natural Science Foundation (Grant No. 7154221).

Microencapsulation Technology: A Powerful Tool for Integrating Expansion and Cryopreservation of Human Embryonic Stem Cells

PubMed Central

Malpique, Rita; Brito, Catarina; Jensen, Janne; Bjorquist, Petter; Carrondo, Manuel J. T.; Alves, Paula M.

2011-01-01

The successful implementation of human embryonic stem cells (hESCs)-based technologies requires the production of relevant numbers of well-characterized cells and their efficient long-term storage. In this study, cells were microencapsulated in alginate to develop an integrated bioprocess for expansion and cryopreservation of pluripotent hESCs. Different three-dimensional (3D) culture strategies were evaluated and compared, specifically, microencapsulation of hESCs as: i) single cells, ii) aggregates and iii) immobilized on microcarriers. In order to establish a scalable bioprocess, hESC-microcapsules were cultured in stirred tank bioreactors. The combination of microencapsulation and microcarrier technology resulted in a highly efficient protocol for the production and storage of pluripotent hESCs. This strategy ensured high expansion ratios (an approximately twenty-fold increase in cell concentration) and high cell recovery yields (>70%) after cryopreservation. When compared with non-encapsulated cells, cell survival post-thawing demonstrated a three-fold improvement without compromising hESC characteristics. Microencapsulation also improved the culture of hESC aggregates by protecting cells from hydrodynamic shear stress, controlling aggregate size and maintaining cell pluripotency for two weeks. This work establishes that microencapsulation technology may prove a powerful tool for integrating the expansion and cryopreservation of pluripotent hESCs. The 3D culture strategy developed herein represents a significant breakthrough towards the implementation of hESCs in clinical and industrial applications. PMID:21850261

Adaptive histogram equalization in digital radiography of destructive skeletal lesions.

PubMed

Braunstein, E M; Capek, P; Buckwalter, K; Bland, P; Meyer, C R

1988-03-01

Adaptive histogram equalization, an image-processing technique that distributes pixel values of an image uniformly throughout the gray scale, was applied to 28 plain radiographs of bone lesions, after they had been digitized. The non-equalized and equalized digital images were compared by two skeletal radiologists with respect to lesion margins, internal matrix, soft-tissue mass, cortical breakthrough, and periosteal reaction. Receiver operating characteristic (ROC) curves were constructed on the basis of the responses. Equalized images were superior to nonequalized images in determination of cortical breakthrough and presence or absence of periosteal reaction. ROC analysis showed no significant difference in determination of margins, matrix, or soft-tissue masses.

Estimation of Organic Vapor Breakthrough in Humidified Activated Carbon Beds: -Application of Wheeler-Jonas Equation, NIOSH MultiVapor™ and RBT (Relative Breakthrough Time)

PubMed Central

Abiko, Hironobu; Furuse, Mitsuya; Takano, Tsuguo

2016-01-01

Objectives: In the use of activated carbon beds as adsorbents for various types of organic vapor in respirator gas filters, water adsorption of the bed and test gas humidity are expected to alter the accuracy in the estimation of breakthrough data. There is increasing interest in the effects of moisture on estimation methods, and this study has investigated the effects with actual breakthrough data. Methods: We prepared several activated carbon beds preconditioned by equilibration with moisture at different relative humidities (RH=40%-70%) and a constant temperature of 20°C. Then, we measured breakthrough curves in the early region of breakthrough time for 10 types of organic vapor, and investigated the effects of moisture on estimation using the Wheeler-Jonas equation, the simulation software NIOSH MultiVapor™ 2.2.3, and RBT (Relative Breakthrough Time) proposed by Tanaka et al. Results: The Wheeler-Jonas equation showed good accordance with breakthrough curves at all RH in this study. However, the correlation coefficient decreased gradually with increasing RH regardless of type of organic vapor. Estimation of breakthrough time by MultiVapor showed good accordance with experimental data at RH=50%. In contrast, it showed discordance at high RH (>50%). RBTs reported previously were consistent with experimental data at RH=50%. On the other hand, the values of RBT changed markedly with increasing RH. Conclusions: The results of each estimation method showed good accordance with experimental data under comparatively dry conditions (RH≤50%). However, there were discrepancies under high humidified conditions, and further studies are warranted. PMID:27725483

The Breakthrough Listen Search for Intelligent Life: Target Selection of Nearby Stars and Galaxies

NASA Astrophysics Data System (ADS)

Isaacson, Howard; Siemion, Andrew P. V.; Marcy, Geoffrey W.; Lebofsky, Matt; Price, Danny C.; MacMahon, David; Croft, Steve; DeBoer, David; Hickish, Jack; Werthimer, Dan; Sheikh, Sofia; Hellbourg, Greg; Enriquez, J. Emilio

2017-05-01

We present the target selection for the Breakthrough Listen search for extraterrestrial intelligence during the first year of observations at the Green Bank Telescope, Parkes Telescope, and Automated Planet Finder. On the way to observing 1,000,000 nearby stars in search of technological signals, we present three main sets of objects we plan to observe in addition to a smaller sample of exotica. We chose the 60 nearest stars, all within 5.1 pc from the Sun. Such nearby stars offer the potential to observe faint radio signals from transmitters that have a power similar to those on Earth. We add a list of 1649 stars drawn from the Hipparcos catalog that span the Hertzprung-Russell diagram, including all spectral types along the main sequence, subgiants, and giant stars. This sample offers diversity and inclusion of all stellar types, but with thoughtful limits and due attention to main sequence stars. Our targets also include 123 nearby galaxies composed of a “morphological-type-complete” sample of the nearest spirals, ellipticals, dwarf spherioidals, and irregulars. While their great distances hamper the detection of technological electromagnetic radiation, galaxies offer the opportunity to observe billions of stars simultaneously and to sample the bright end of the technological luminosity function. We will also use the Green Bank and Parkes telescopes to survey the plane and central bulge of the Milky Way. Finally, the complete target list includes several classes of exotica, including white dwarfs, brown dwarfs, black holes, neutron stars, and asteroids in our solar system.

Assessing public forecasts to encourage accountability: The case of MIT's Technology Review.

PubMed

Funk, Jeffrey

2017-01-01

Although high degrees of reliability have been found for many types of forecasts purportedly due to the existence of accountability, public forecasts of technology are rarely assessed and continue to have a poor reputation. This paper's analysis of forecasts made by MIT's Technology Review provides a rare assessment and thus a means to encourage accountability. It first shows that few of the predicted "breakthrough technologies" currently have large markets. Only four have sales greater than $10 billion while eight technologies not predicted by Technology Review have sales greater than $10 billion including three with greater than $100 billion and one other with greater than $50 billion. Second, possible reasons for these poor forecasts are then discussed including an over emphasis on the science-based process of technology change, sometimes called the linear model of innovation. Third, this paper describes a different model of technology change, one that is widely used by private companies and that explains the emergence of those technologies that have greater than $10 billion in sales. Fourth, technology change and forecasts are discussed in terms of cognitive biases and mental models.

Recognition of the epicardial breakthrough on body surface isopotential maps: influence of the inter-electrode distance on the patterns reflecting the epicardial breakthrough.

PubMed

Toyama, J; Tabata, O

1981-10-01

The epicardial breakthrough can be recognized from the localized depression of the body surface potential, which is characterized by a localized bend of the equipotential lines or a send-minimum on isopotential maps. Recognition of epicardial breakthrough with isopotential maps enables us to diagnose location of the block site of the bundle branch blocks more precisely than by ECG or VCG. However, the optimum inter-electrode distance for detection of such a localized potential has not been determined. In the present study, influence of the inter-electrode distance on the characteristic patterns reflecting the epicardial breakthrough was studied on 16 healthy persons using 9 x 9 electrode arrays with inter-electrode distance of 1.25 cm, 5 x 5 with 2.5 cm, and 3 x 3 with 5 cm. Breakthrough was recognized in 15 out of 16 cases (94%) on maps recorded with electrode arrays with inter-electrode distance of 1.25 and 2.5 cm. However, detectability of the breakthrough was reduced to 10 out of 16 cases (63%) with electrode array having inter-electrode distance of 5 cm. In conclusion, it is preferable to use an electrode array with an inter-electrode distance of no more than 2.5 cm for the purpose of breakthrough recognition.

Breakthrough: Better Fiber for Better Products

ScienceCinema

Griffith, George; Garnier, John

2018-01-08

Researchers at Idaho National Laboratory have developed a cost-effective method for the continuous production of alpha silicon carbide fiber. The exceptionally strong, lightweight fiber could enable significant performance improvements in many everyday products.

The Effectiveness of Automatic Recommending System for Premedication in Reducing Recurrent Radiocontrast Media Hypersensitivity Reactions

PubMed Central

Bae, Yun-Jeong; Hwang, Ye Won; Yoon, Sun-young; Kim, Sujeong; Lee, Taehoon; Lee, Yoon Su; Kwon, Hyouk-Soo; Cho, You Sook; Shin, Myung Jin; Moon, Hee-Bom; Kim, Tae-Bum

2013-01-01

Background Non-ionic radiocontrast media (RCM) is rarely associated with hypersensitivity reactions. Premedication of patients who reacted previously to RCM with systemic corticosteroids and/or antihistamines can help reduce recurrent hypersensitivity reactions. However, premedication is still not prescribed in many cases for various reasons. This study aimed to determine the effectiveness of our novel RCM hypersensitivity surveillance and automatic recommending system for premedication. Methods and Results Hospitalized patients with a history of RCM hypersensitivity were identified in an electronic medical record system that included a mandatory reporting system for past adverse drug reactions. In 2009, a novel automatic prescription system was added that classified index RCM reactions by severity and dispensed appropriate corticosteroid and/or antihistamine pretreatment prior to new RCM exposures. The data from 12 months under the previous system and 12 months under the current system were compared. The two systems had similar overall premedication rates (91% and 95%) but the current system was associated with a significantly higher corticosteroid premedication rate (65% vs. 14%), which significantly reduced the breakthrough reaction rate (6.7% vs. 15.2%). The current system was also associated with increased corticosteroid and antihistamine premedication of patients with a mild index reaction (61% vs. 7%) and a reduction in their breakthrough reaction rate (6% vs. 15%). Conclusions Premedication with corticosteroid and/or antihistamine, which was increased by our novel automatic prescription system, significantly reduced breakthrough reactions in patients with a history of RCM hypersensitivity. PMID:23840391

Emerging technologies and their impact on disability.

PubMed

Wise, Paul H

2012-01-01

Technological innovation is transforming the prevalence and functional impact of child disability, the scale of social disparities in child disability, and perhaps the essential meaning of disability in an increasingly technology-dominated world. In this article, Paul Wise investigates several specific facets of this transformation. He begins by showing how technological change influences the definition of disability, noting that all technology attempts to address some deficiency in human capacity or in the human condition. Wise then looks at the impact of technology on childhood disabilities. Technical improvements in the physical environment, such as better housing, safer roads, and poison-prevention packaging, have significantly reduced childhood injury and disability. Other technological breakthroughs, such as those that identify genetic disorders that may lead to pregnancy termination, raise difficult moral and ethical issues. Technologies that identify potential health risks are also problematic in the absence of any efficient treatment. Wise stresses the imbalance in the existing health care delivery system, which is geared toward treating childhood physical illnesses that are declining in prevalence at a time when mental and emotional conditions, many of which are not yet well understood, are on the rise. This mismatch, Wise says, poses complex challenges to caring for disabled children, particularly in providing them with highly coordinated and integrated systems of care. Technology can also widen social disparities in health care for people, including children with disabilities. As Wise observes, efficacy--the ability of a technology to change health outcomes--is key to understanding the relationship of technology to social disparities. As technological innovation enhances efficacy, access to that technology becomes more important. Health outcomes may improve for those who can afford the technology, for example, but not for others. Hence, as efficacy grows, so too does the burden on society to provide access to technology equitably to all those in need. Without such access, technological innovation will likely expand disparities in child outcomes rather than reduce them.

Characterization of Foci and Breakthrough Sites During Persistent and Long-Standing Persistent Atrial Fibrillation in Patients: Studies Using High-Density (510-512 Electrodes) Biatrial Epicardial Mapping.

PubMed

Lee, Seungyup; Sahadevan, Jayakumar; Khrestian, Celeen M; Markowitz, Alan; Waldo, Albert L

2017-03-17

We previously demonstrated that persistent and long-standing persistent atrial fibrillation is maintained by activation emanating from foci and breakthrough sites of different cycle lengths (CLs). The purpose of this study was to characterize the behavior of focal and nonrandom breakthrough activation identified during high-density mapping of atrial fibrillation in these patients. During open heart surgery, we recorded activation from both atria simultaneously using 510 to 512 epicardial electrodes along with ECG lead II in 12 patients with persistent and long-standing persistent atrial fibrillation. For each patient, analysis of 32 consecutive seconds of activation from identified focal (sustained and/or intermittent) and nonrandom breakthrough sites was performed. Multiple foci (sustained and/or intermittent) of different CLs were present in both atria in 11 of 12 patients; 8 foci were sustained, and 22 were intermittent. Temporal CL behavior of sustained foci varied over time (≤20 ms of the mean CL). For intermittent foci, no activation periods were due to a spontaneous pause (18 of 22) or activation of the focus by another wave front (11 of 22). All patients had breakthrough activation. Seven patients had 12 nonrandom breakthrough sites. Periods of no breakthrough activation were caused by a spontaneous pause (6 of 12 patients) or activation from another wave front (4 of 12) or were uncertain (5 of 12). Focal and nonrandom breakthrough activation sometimes produced repetitive "wannabe" (incomplete) reentry in 6 of 12 patients. During persistent and long-standing persistent atrial fibrillation, sustained foci manifested variable CLs. Spontaneous pauses or activation from other wave fronts explained the intermittency of foci and nonrandom breakthrough. Focal and nonrandom breakthrough activation occasionally produced wannabe reentry. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

Prediction of Breakthrough Curves for Conservative and Reactive Transport from the Structural Parameters of Highly Heterogeneous Media

NASA Astrophysics Data System (ADS)

Hansen, S. K.; Haslauer, C. P.; Cirpka, O. A.; Vesselinov, V. V.

2016-12-01

It is desirable to predict the shape of breakthrough curves downgradient of a solute source from subsurface structural parameters (as in the small-perturbation macrodispersion theory) both for realistically heterogeneous fields, and at early time, before any sort of Fickian model is applicable. Using a combination of a priori knowledge, large-scale Monte Carlo simulation, and regression techniques, we have developed closed-form predictive expressions for pre- and post-Fickian flux-weighted solute breakthrough curves as a function of distance from the source (in integral scales) and variance of the log hydraulic conductivity field. Using the ensemble of Monte Carlo realizations, we have simultaneously computed error envelopes for the estimated flux-weighted breakthrough, and for the divergence of point breakthrough curves from the flux-weighted average, as functions of the predictive parameters. We have also obtained implied late-time macrodispersion coefficients for highly heterogeneous environments from the breakthrough statistics. This analysis is relevant for the modelling of reactive as well as conservative transport, since for many kinetic sorption and decay reactions, Laplace-domain modification of the breakthrough curve for conservative solute produces the correct curve for the reactive system.

Targeted Gene Manipulation in Plants Using the CRISPR/Cas Technology.

PubMed

Zhang, Dandan; Li, Zhenxiang; Li, Jian-Feng

2016-05-20

The CRISPR/Cas technology is emerging as a revolutionary genome editing tool in diverse organisms including plants, and has quickly evolved into a suite of versatile tools for sequence-specific gene manipulations beyond genome editing. Here, we review the most recent applications of the CRISPR/Cas toolkit in plants and also discuss key factors for improving CRISPR/Cas performance and strategies for reducing the off-target effects. Novel technical breakthroughs in mammalian research regarding the CRISPR/Cas toolkit will also be incorporated into this review in hope to stimulate prospective users from the plant research community to fully explore the potential of these technologies. Copyright © 2016 Institute of Genetics and Developmental Biology, Chinese Academy of Sciences, and Genetics Society of China. Published by Elsevier Ltd. All rights reserved.

High-fidelity video and still-image communication based on spectral information: natural vision system and its applications

NASA Astrophysics Data System (ADS)

Yamaguchi, Masahiro; Haneishi, Hideaki; Fukuda, Hiroyuki; Kishimoto, Junko; Kanazawa, Hiroshi; Tsuchida, Masaru; Iwama, Ryo; Ohyama, Nagaaki

2006-01-01

In addition to the great advancement of high-resolution and large-screen imaging technology, the issue of color is now receiving considerable attention as another aspect than the image resolution. It is difficult to reproduce the original color of subject in conventional imaging systems, and that obstructs the applications of visual communication systems in telemedicine, electronic commerce, and digital museum. To breakthrough the limitation of conventional RGB 3-primary systems, "Natural Vision" project aims at an innovative video and still-image communication technology with high-fidelity color reproduction capability, based on spectral information. This paper summarizes the results of NV project including the development of multispectral and multiprimary imaging technologies and the experimental investigations on the applications to medicine, digital archives, electronic commerce, and computer graphics.

Genetic tool development and systemic regulation in biosynthetic technology.

PubMed

Dai, Zhongxue; Zhang, Shangjie; Yang, Qiao; Zhang, Wenming; Qian, Xiujuan; Dong, Weiliang; Jiang, Min; Xin, Fengxue

2018-01-01

With the increased development in research, innovation, and policy interest in recent years, biosynthetic technology has developed rapidly, which combines engineering, electronics, computer science, mathematics, and other disciplines based on classical genetic engineering and metabolic engineering. It gives a wider perspective and a deeper level to perceive the nature of life via cell mechanism, regulatory networks, or biological evolution. Currently, synthetic biology has made great breakthrough in energy, chemical industry, and medicine industries, particularly in the programmable genetic control at multiple levels of regulation to perform designed goals. In this review, the most advanced and comprehensive developments achieved in biosynthetic technology were represented, including genetic engineering as well as synthetic genomics. In addition, the superiority together with the limitations of the current genome-editing tools were summarized.

A Look at the Impact of High-End Computing Technologies on NASA Missions

NASA Technical Reports Server (NTRS)

Biswas, Rupak; Dunbar, Jill; Hardman, John; Bailey, F. Ron; Wheeler, Lorien; Rogers, Stuart

2012-01-01

From its bold start nearly 30 years ago and continuing today, the NASA Advanced Supercomputing (NAS) facility at Ames Research Center has enabled remarkable breakthroughs in the space agency s science and engineering missions. Throughout this time, NAS experts have influenced the state-of-the-art in high-performance computing (HPC) and related technologies such as scientific visualization, system benchmarking, batch scheduling, and grid environments. We highlight the pioneering achievements and innovations originating from and made possible by NAS resources and know-how, from early supercomputing environment design and software development, to long-term simulation and analyses critical to design safe Space Shuttle operations and associated spinoff technologies, to the highly successful Kepler Mission s discovery of new planets now capturing the world s imagination.

Airframe Research and Technology for Hypersonic Airbreathing Vehicles

NASA Technical Reports Server (NTRS)

Glass, David E.; Merski, N. Ronald; Glass, Christopher E.

2002-01-01

The Hypersonics Investment Area (HIA) within NASA's Advanced Space Transportation Program (ASTP) has the responsibility to develop hypersonic airbreathing vehicles for access to space. The Airframe Research and Technology (AR and T) Project, as one of six projects in the HIA, will push the state-of-the-art in airframe and vehicle systems for low-cost, reliable, and safe space transportation. The individual technologies within the project are focused on advanced, breakthrough technologies in airframe and vehicle systems and cross-cutting activities that are the basis for improvements in these disciplines. Both low and medium technology readiness level (TRL) activities are being pursued. The key technical areas that will be addressed by the project include analysis and design tools, integrated vehicle health management (IVHM), composite (polymer, metal, and ceramic matrix) materials development, thermal/structural wall concepts, thermal protection systems, seals, leading edges, aerothermodynamics, and airframe/propulsion flowpath technology. Each of the technical areas or sub-projects within the Airframe R and T Project is described in this paper.

Medical technology integration: CT, angiography, imaging-capable OR-table, navigation and robotics in a multifunctional sterile suite.

PubMed

Jacob, A L; Regazzoni, P; Bilecen, D; Rasmus, M; Huegli, R W; Messmer, P

2007-01-01

Technology integration is an enabling technological prerequisite to achieve a major breakthrough in sophisticated intra-operative imaging, navigation and robotics in minimally invasive and/or emergency diagnosis and therapy. Without a high degree of integration and reliability comparable to that achieved in the aircraft industry image guidance in its different facets will not ultimately succeed. As of today technology integration in the field of image-guidance is close to nonexistent. Technology integration requires inter-departmental integration of human and financial resources and of medical processes in a dialectic way. This expanded techno-socio-economic integration has profound consequences for the administration and working conditions in hospitals. At the university hospital of Basel, Switzerland, a multimodality multifunction sterile suite was put into operation after a substantial pre-run. We report the lessons learned during our venture into the world of medical technology integration and describe new possibilities for similar integration projects in the future.

Sea Surface Salinity : Research Challenges and Opportunities

NASA Technical Reports Server (NTRS)

Halpern, David; Lagerloef, Gary; Font, Jordi

2012-01-01

Sea surface salinity (SSS) can be important in regulating sea surface temperature (SST). Two technological breakthrough satellite SSS missions, Aquarius and Soil Moisture and Ocean Salinity (SMOS), are currently producing high-quality SSS data. This paper provides an overview of the importance of SSS for weather and climate applications and describes the Aquarius and SMOS missions. The newness of adequately sampled SSS data prompted a first-time at-sea field campaign devoted to improved understanding of SSS variations.

Improved Ribosome-Footprint and mRNA Measurements Provide Insights into Dynamics and Regulation of Yeast Translation

DTIC Science & Technology

2016-02-11

the White- head Genome Technology Core for sequencing . This work was supported by the UCSF Program for Breakthrough Biomedical Research (funded in...landscape of the yeast genome defined by RNA sequencing . Science 320, 1344–1349. Nedialkova, D.D., and Leidel, S.A. (2015). Optimization of Codon Translation... the CC BY license (http://creativecommons.org/licenses/by/4.0/). SUMMARY Ribosome-footprint profiling provides genome -wide snapshots of translation

JPRS Report, Science & Technology, China: Energy.

DTIC Science & Technology

1992-02-26

China Becomes Major Energy Player [Wang Hanlin; KEJIRIBAO, 19Aug91] 1 S&T Led the Way to Creating Energy Bases [ Lu Xinning; RENMIN RIBAO, 16 Sep 91...RIBAO, 14 Dec 91] 18 COAL Energy Ministry Takes Steps To Strengthen Coal Industry [Xie Ranhao; JINGJI RIBAO, 29 Oct 91] .... 19 Henan’s Coal...27 Dec 91] 22 Zhongyuan Is Tempting Target for Oil and Gas Theft [ Zhu Sixiong; RENMIN RIBAO, 17 Dec 91] 23 Big Breakthrough in Prospecting

Breakthrough propulsion physics research program

NASA Astrophysics Data System (ADS)

Millis, Marc G.

1997-01-01

In 1996, a team of government, university and industry researchers proposed a program to seek the ultimate breakthroughs in space transportation: propulsion that requires no propellant mass, propulsion that can approach and, if possible, circumvent light speed, and breakthrough methods of energy production to power such devices. This Breakthrough Propulsion Physics program, managed by Lewis Research Center, is one part of a comprehensive, long range Advanced Space Transportation Plan managed by Marshall Space Flight Center. Because the breakthrough goals are beyond existing science, a main emphasis of this program is to establish metrics and ground rules to produce near-term credible progress toward these incredible possibilities. An introduction to the emerging scientific possibilities from which such solutions can be sought is also presented.

Breakthrough Propulsion Physics Research Program

NASA Technical Reports Server (NTRS)

Millis, Marc G.

1996-01-01

In 1996, a team of government, university and industry researchers proposed a program to seek the ultimate breakthroughs in space transportation: propulsion that requires no propellant mass, propulsion that can approach and, if possible, circumvent light speed, and breakthrough methods of energy production to power such devices. This Breakthrough Propulsion Physics program, managed by Lewis Research Center, is one part of a comprehensive, long range Advanced Space Transportation Plan managed by Marshall Space Flight Center. Because the breakthrough goals are beyond existing science, a main emphasis of this program is to establish metrics and ground rules to produce near-term credible progress toward these incredible possibilities. An introduction to the emerging scientific possibilities from which such solutions can be sought is also presented.

Transmission and Distribution Efficiency Improvement Rearch and Development Survey.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brooks, C.L.; Westinghouse Electric Corporation. Advanced Systems Technology.

Purpose of this study was to identify and quantify those technologies for improving transmission and distribution (T and D) system efficiency that could provide the greatest benefits for utility customers in the Pacific Northwest. Improving the efficiency of transmission and distribution systems offers a potential source of conservation within the utility sector. An extensive review of this field resulted in a list of 49 state-of-the-art technologies and 39 future technologies. Of these, 15 from the former list and 7 from the latter were chosen as the most promising and then submitted to an evaluative test - a modeled sample systemmore » for Benton County PUD, a utility with characteristics typical of a BPA customer system. Reducing end-use voltage on secondary distribution systems to decrease the energy consumption of electrical users when possible, called ''Conservation Voltage Reduction,'' was found to be the most cost effective state-of-the-art technology. Voltampere reactive (var) optimization is a similarly cost effective alternative. The most significant reduction in losses on the transmission and distribution system would be achieved through the replacement of standard transformers with high efficiency transformers, such as amorphous steel transformers. Of the future technologies assessed, the ''Distribution Static VAR Generator'' appears to have the greatest potential for technological breakthroughs and, therefore in time, commercialization. ''Improved Dielectric Materials,'' with a relatively low cost and high potential for efficiency improvement, warrant R and D consideration. ''Extruded Three-Conductor Cable'' and ''Six- and Twelve-Phase Transmission'' programs provide only limited gains in efficiency and applicability and are therefore the least cost effective.« less

Nanoreactors for green catalysis

PubMed Central

De Martino, M Teresa; Abdelmohsen, Loai K E A; Rutjes, Floris P J T

2018-01-01

Sustainable and environmentally benign production are key drivers for developments in the chemical industrial sector, as protecting our planet has become a significant element that should be considered for every industrial breakthrough or technological advancement. As a result, the concept of green chemistry has been recently defined to guide chemists towards minimizing any harmful outcome of chemical processes in either industry or research. Towards greener reactions, scientists have developed various approaches in order to decrease environmental risks while attaining chemical sustainability and elegancy. Utilizing catalytic nanoreactors for greener reactions, for facilitating multistep synthetic pathways in one-pot procedures, is imperative with far-reaching implications in the field. This review is focused on the applications of some of the most used nanoreactors in catalysis, namely: (polymer) vesicles, micelles, dendrimers and nanogels. The ability and efficiency of catalytic nanoreactors to carry out organic reactions in water, to perform cascade reaction and their ability to be recycled will be discussed. PMID:29719570

A new thermally driven refrigeration system with environmental benefits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garris, C.A. Jr.; Hong, W.J.; Mavriplis, C.

1998-07-01

The pressure-exchange ejector offers the possibility of attaining a breakthrough in the level of performance of ejectors by means of utilizing non-dissipative non-steady flow mechanisms. Yet, the device retains much of the mechanical simplicity of conventional steady-flow ejectors. If such a substantial improvement in performance is demonstrated, its application to ejector refrigeration will be very important. Such a development would provide significant benefits for the environment in terms of both CFC usage reduction and greenhouse gas reduction. The current paper will discuss in detail the concept of pressure-exchange ejector refrigeration, compare it with existing technologies, and discuss the potential impactmore » that might be derived if certain levels of ejector performance can be achieved. Since the limiting issue on the system performance is in the fluid dynamics of non-steady flow induction, research issues and recent progress will be discussed.« less

Fast and efficient STT switching in MTJ using additional transient pulse current

NASA Astrophysics Data System (ADS)

Pathak, Sachin; Cha, Jongin; Jo, Kangwook; Yoon, Hongil; Hong, Jongill

2017-06-01

We propose a profile of write pulse current-density to switch magnetization in a perpendicular magnetic tunnel junction to reduce switching time and write energy as well. Our simulated results show that an overshoot transient pulse current-density (current spike) imposed to conventional rectangular-shaped pulse current-density (main pulse) significantly improves switching speed that yields the reduction in write energy accordingly. For example, we could dramatically reduce the switching time by 80% and thereby reduce the write energy over 9% in comparison to the switching without current spike. The current spike affects the spin dynamics of the free layer and reduces the switching time mainly due to spin torque induced. On the other hand, the large Oersted field induced causes changes in spin texture. We believe our proposed write scheme can make a breakthrough in magnetic random access memory technology seeking both high speed operation and low energy consumption.

State-of-the-art radiation detectors for medical imaging: Demands and trends

NASA Astrophysics Data System (ADS)

Darambara, Dimitra G.

2006-12-01

Over the last half-century a variety of significant technical advances in several scientific fields has been pointing to an exploding growth in the field of medical imaging leading to a better interpretation of more specific anatomical, biochemical and molecular pathways. In particular, the development of novel imaging detectors and readout electronics has been critical to the advancement of medical imaging allowing the invention of breakthrough platforms for simultaneous acquisition of multi-modality images at molecular level. The present paper presents a review of the challenges, demands and constraints on radiation imaging detectors imposed by the nature of the modality and the physics of the imaging source. This is followed by a concise review and perspective on various types of state-of-the-art detector technologies that have been developed to meet these requirements. Trends, prospects and new concepts for future imaging detectors are also highlighted.

Energy-loss return gate via liquid dielectric polarization.

PubMed

Kim, Taehun; Yong, Hyungseok; Kim, Banseok; Kim, Dongseob; Choi, Dukhyun; Park, Yong Tae; Lee, Sangmin

2018-04-12

There has been much research on renewable energy-harvesting techniques. However, owing to increasing energy demands, significant energy-related issues remain to be solved. Efforts aimed at reducing the amount of energy loss in electric/electronic systems are essential for reducing energy consumption and protecting the environment. Here, we design an energy-loss return gate system that reduces energy loss from electric/electronic systems by utilizing the polarization of liquid dielectrics. The use of a liquid dielectric material in the energy-loss return gate generates electrostatic potential energy while reducing the dielectric loss of the electric/electronic system. Hence, an energy-loss return gate can make breakthrough impacts possible by amplifying energy-harvesting efficiency, lowering the power consumption of electronics, and storing the returned energy. Our study indicates the potential for enhancing energy-harvesting technologies for electric/electronics systems, while increasing the widespread development of these systems.

The photobiological production of hydrogen: potential efficiency and effectiveness as a renewable fuel.

PubMed

Prince, Roger C; Kheshgi, Haroon S

2005-01-01

Photosynthetic microorganisms can produce hydrogen when illuminated, and there has been considerable interest in developing this to a commercially viable process. Its appealing aspects include the fact that the hydrogen would come from water, and that the process might be more energetically efficient than growing, harvesting, and processing crops. We review current knowledge about photobiological hydrogen production, and identify and discuss some of the areas where scientific and technical breakthroughs are essential for commercialization. First we describe the underlying biochemistry of the process, and identify some opportunities for improving photobiological hydrogen production at the molecular level. Then we address the fundamental quantum efficiency of the various processes that have been suggested, technological issues surrounding large-scale growth of hydrogen-producing microorganisms, and the scale and efficiency on which this would have to be practiced to make a significant contribution to current energy use.

Ionic liquid-based materials: a platform to design engineered CO2 separation membranes.

PubMed

Tomé, Liliana C; Marrucho, Isabel M

2016-05-21

During the past decade, significant advances in ionic liquid-based materials for the development of CO2 separation membranes have been accomplished. This review presents a perspective on different strategies that use ionic liquid-based materials as a unique tuneable platform to design task-specific advanced materials for CO2 separation membranes. Based on compilation and analysis of the data hitherto reported, we provide a judicious assessment of the CO2 separation efficiency of different membranes, and highlight breakthroughs and key challenges in this field. In particular, configurations such as supported ionic liquid membranes, polymer/ionic liquid composite membranes, gelled ionic liquid membranes and poly(ionic liquid)-based membranes are detailed, discussed and evaluated in terms of their efficiency, which is attributed to their chemical and structural features. Finally, an integrated perspective on technology, economy and sustainability is provided.

Children's vulnerability to toxic chemicals: a challenge and opportunity to strengthen health and environmental policy.

PubMed

Landrigan, Philip J; Goldman, Lynn R

2011-05-01

A key policy breakthrough occurred nearly twenty years ago with the discovery that children are far more sensitive than adults to toxic chemicals in the environment. This finding led to the recognition that chemical exposures early in life are significant and preventable causes of disease in children and adults. We review this knowledge and recommend a new policy to regulate industrial and consumer chemicals that will protect the health of children and all Americans, prevent disease, and reduce health care costs. The linchpins of a new US chemical policy will be: first, a legally mandated requirement to test the toxicity of chemicals already in commerce, prioritizing chemicals in the widest use, and incorporating new assessment technologies; second, a tiered approach to premarket evaluation of new chemicals; and third, epidemiologic monitoring and focused health studies of exposed populations.

Designing two-in-one antibodies.

PubMed

Valladares, Ignacio Garcia; Espinoza, Luis R

2009-09-01

Evaluation of: Bostrom J, Shang-Fan Y, Kan D et al.: Variants of the antibody Herceptin that interact with HER2 and VEGF at the antigen binding site. Science 323, 1610-1614 (2009). The longstanding held notion that one antibody equals one antigen and, hence, one function has been challenged in recent years. Improved technology in antibody production, especially the accumulation of sequence data of immunoglobulin genes and the advent of PCR have made it possible to clone antibody gene repertoires. The current paper provides further challenge to the notion of one antibody = one antigen by developing 'two-in-one' antibodies with an antigen-binding site that binds two distinct proteins with high affinity. A therapeutic variant antibody of Herceptin (Genentech, CA, USA) was isolated that binds the human EGF receptor (HER)2 and also to VEGF. This development may represent a breakthrough discovery and may have significant implications in the therapy of malignant, infectious, allergic and autoimmune disorders.

Crystal nuclei templated nanostructured membranes prepared by solvent crystallization and polymer migration

NASA Astrophysics Data System (ADS)

Wang, Bo; Ji, Jing; Li, Kang

2016-09-01

Currently, production of porous polymeric membranes for filtration is predominated by the phase-separation process. However, this method has reached its technological limit, and there have been no significant breakthrough over the last decade. Here we show, using polyvinylidene fluoride as a sample polymer, a new concept of membrane manufacturing by combining oriented green solvent crystallization and polymer migration is able to obtain high performance membranes with pure water permeation flux substantially higher than those with similar pore size prepared by conventional phase-separation processes. The new manufacturing procedure is governed by fewer operating parameters and is, thus, easier to control with reproducible results. Apart from the high water permeation flux, the prepared membranes also show excellent stable flux after fouling and superior mechanical properties of high pressure load and better abrasion resistance. These findings demonstrate the promise of a new concept for green manufacturing nanostructured polymeric membranes with high performances.

Two-Dimensional Materials as Prospective Scaffolds for Mixed-Matrix Membrane-Based CO2 Separation.

PubMed

Zhu, Xiang; Tian, Chengcheng; Do-Thanh, Chi-Linh; Dai, Sheng

2017-09-11

Membrane-based CO 2 separation technology plays a significant role in environmental remediation and clean energy. Two-dimensional (2D) materials with atomically precise structures have emerged as prospective scaffolds to develop mixed-matrix membranes (MMMs) for gas separation. Summarized in this perspective review are the latest breakthrough studies in the synthesis of 2D-material-based MMMs to separate CO 2 from gas mixtures. 2D materials including graphene oxide (GO), metal-organic framework (MOF)-derived nanosheets, covalent organic frameworks (COFs), and transition metal dichalcogenides (TMDs), as fascinating building blocks, have been comprehensively summarized, together with a focus on synthetic processes and gas separation properties. Challenges and the latest advances in the manufacture of novel synthetic 2D materials are briefly discussed to foresee emerging opportunities for the development of new generations of 2D-material-based MMMs. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Update on Recovering Lead From Scrap Batteries

NASA Astrophysics Data System (ADS)

Cole, E. R.; Lee, A. Y.; Paulson, D. L.

1985-02-01

Previous work at the Bureau of Mines Rolla Research Center, U.S. Department of the Interior, resulted in successful development of a bench-scale, combination electrorefining-electrowinning method for recycling lead from scrap batteries by using waste fluosilicic acid (H2SiF6) as electrolyte.1,2 This paper describes larger scale experiments. Prior attempts to electrowin lead failed because large quantities of insoluble lead dioxide were deposited on the anodes at the expense of lead deposition on the cathodes. A major breakthrough was achieved with the discovery that lead dioxide formation at the anodes is prevented by adding a small amount of phosphorus to the electrolyte. The amount of PbO2 formed on the anodes during lead electrowinning was less than 1% of the total lead deposited on the cathodes. This work recently won the prestigious IR·100 award as one of the 100 most significant technological advances of 1984.

Quantum-Dot-Based Solar Cells: Recent Advances, Strategies, and Challenges.

PubMed

Kim, Mee Rahn; Ma, Dongling

2015-01-02

Among next-generation photovoltaic systems requiring low cost and high efficiency, quantum dot (QD)-based solar cells stand out as a very promising candidate because of the unique and versatile characteristics of QDs. The past decade has already seen rapid conceptual and technological advances on various aspects of QD solar cells, and diverse opportunities, which QDs can offer, predict that there is still ample room for further development and breakthroughs. In this Perspective, we first review the attractive advantages of QDs, such as size-tunable band gaps and multiple exciton generation (MEG), beneficial to solar cell applications. We then analyze major strategies, which have been extensively explored and have largely contributed to the most recent and significant achievements in QD solar cells. Finally, their high potential and challenges are discussed. In particular, QD solar cells are considered to hold immense potential to overcome the theoretical efficiency limit of 31% for single-junction cells.

High dimensional reflectance analysis of soil organic matter

NASA Technical Reports Server (NTRS)

Henderson, T. L.; Baumgardner, M. F.; Franzmeier, D. P.; Stott, D. E.; Coster, D. C.

1992-01-01

Recent breakthroughs in remote-sensing technology have led to the development of high spectral resolution imaging sensors for observation of earth surface features. This research was conducted to evaluate the effects of organic matter content and composition on narrowband soil reflectance across the visible and reflective infrared spectral ranges. Organic matter from four Indiana agricultural soils, ranging in organic C content from 0.99 to 1.72 percent, was extracted, fractionated, and purified. Six components of each soil were isolated and prepared for spectral analysis. Reflectance was measured in 210 narrow bands in the 400- to 2500-nm wavelength range. Statistical analysis of reflectance values indicated the potential of high dimensional reflectance data in specific visible, near-infrared, and middle-infrared bands to provide information about soil organic C content, but not organic matter composition. These bands also responded significantly to Fe- and Mn-oxide content.

Towards G2G: Systems of Technology Database Systems

NASA Technical Reports Server (NTRS)

Maluf, David A.; Bell, David

2005-01-01

We present an approach and methodology for developing Government-to-Government (G2G) Systems of Technology Database Systems. G2G will deliver technologies for distributed and remote integration of technology data for internal use in analysis and planning as well as for external communications. G2G enables NASA managers, engineers, operational teams and information systems to "compose" technology roadmaps and plans by selecting, combining, extending, specializing and modifying components of technology database systems. G2G will interoperate information and knowledge that is distributed across organizational entities involved that is ideal for NASA future Exploration Enterprise. Key contributions of the G2G system will include the creation of an integrated approach to sustain effective management of technology investments that supports the ability of various technology database systems to be independently managed. The integration technology will comply with emerging open standards. Applications can thus be customized for local needs while enabling an integrated management of technology approach that serves the global needs of NASA. The G2G capabilities will use NASA s breakthrough in database "composition" and integration technology, will use and advance emerging open standards, and will use commercial information technologies to enable effective System of Technology Database systems.

Haptics – Touchfeedback Technology Widening the Horizon of Medicine

PubMed Central

Kapoor, Shalini; Arora, Pallak; Kapoor, Vikas; Jayachandran, Mahesh; Tiwari, Manish

2014-01-01

Haptics, or touchsense haptic technology is a major breakthrough in medical and dental interventions. Haptic perception is the process of recognizing objects through touch. Haptic sensations are created by actuators or motors which generate vibrations to the users and are controlled by embedded software which is integrated into the device. It takes the advantage of a combination of somatosensory pattern of skin and proprioception of hand position. Anatomical and diagnostic knowledge, when it is combined with this touch sense technology, has revolutionized medical education. This amalgamation of the worlds of diagnosis and surgical intervention adds precise robotic touch to the skill of the surgeon. A systematic literature review was done by using MEDLINE, GOOGLE SEARCH AND PubMed. The aim of this article was to introduce the fundamentals of haptic technology, its current applications in medical training and robotic surgeries, limitations of haptics and future aspects of haptics in medicine. PMID:24783164

R&D to Market Success: BTO-Supported Technologies Commercialized from 2010-2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2017-04-01

Technology commercialization plays an essential role in almost every facet of the U.S. economy. It spurs private sector funding that supports innovative breakthroughs, drives growth through increased productivity and product development, increases American competitiveness, and creates domestic jobs. The BTO Technology Commercialization report is an annual publication offering the latest information on successfully commercialized technologies resulting in part from BTO’s research partnerships. This report defines a “commercialized technology” as a process, technique, design, machine, tool, material, or software that was developed with funds provided at least in part by BTO, and that has resulted in domestic sales or is inmore » use in the U.S. This definition also applies to open-source software products developed with support from BTO, all of which are currently distributed freely but are actively used for commercial purposes.« less

The Global Climate and Energy Project at Stanford University: Fundamental Research Towards Future Energy Technologies

NASA Astrophysics Data System (ADS)

Milne, Jennifer L.; Sassoon, Richard E.; Hung, Emilie; Bosshard, Paolo; Benson, Sally M.

The Global Climate and Energy Project (GCEP), at Stanford University, invests in research with the potential to lead to energy technologies with lower greenhouse gas emissions than current energy technologies. GCEP is sponsored by four international companies, ExxonMobil, GE, Schlumberger, and Toyota and supports research programs in academic institutions worldwide. Research falls into the broad areas of carbon based energy systems, renewables, electrochemistry, and the electric grid. Within these areas research efforts are underway that are aimed at achieving break-throughs and innovations that greatly improve efficiency, performance, functionality and cost of many potential energy technologies of the future including solar, batteries, fuel cells, biofuels, hydrogen storage and carbon capture and storage. This paper presents a summary of some of GCEP's activities over the past 7 years with current research areas of interest and potential research directions in the near future.

KSC-97PC1281

NASA Image and Video Library

1997-08-22

KENNEDY SPACE CENTER, FLA. -- Following the presentation of the Universal Signal Conditioning Amplifier (USCA), a new piece of technology developed through a National Aeronautics and Space Administration (NASA) partnership with industry, to Kennedy Space Center (KSC) Director Roy Bridges, Jr., key participants in the partnership pose for a group portrait. They are (from left) Bill Larson, NASA; Dr. Pedro Medelius, INET; Roy Bridges, Jr., KSC Director; Ed Gladney and William Saputo, L-3 Communications; Pam Gillespi, representing Congressman Dave Weldon; and Frank Kinney, Technological Research and Development Authority. The USCA is a key component of the codeveloped Automated Data Acquisition System (ADAS) that measures temperature, pressure and vibration at KSC's launch pads. The breakthrough technology is expected to reduce sensor setup and configuration times from hours to seconds. KSC teamed up with Florida's Technological Research and Development Authority and manufacturer L-3 Communications to produce a system that would benefit the aerospace industry and other commercial markets

Estimation of Release History of Pollutant Source and Dispersion Coefficient of Aquifer Using Trained ANN Model

NASA Astrophysics Data System (ADS)

Srivastava, R.; Ayaz, M.; Jain, A.

2013-12-01

Knowledge of the release history of a groundwater pollutant source is critical in the prediction of the future trend of the pollutant movement and in choosing an effective remediation strategy. Moreover, for source sites which have undergone an ownership change, the estimated release history can be utilized for appropriate allocation of the costs of remediation among different parties who may be responsible for the contamination. Estimation of the release history with the help of concentration data is an inverse problem that becomes ill-posed because of the irreversible nature of the dispersion process. Breakthrough curves represent the temporal variation of pollutant concentration at a particular location, and contain significant information about the source and the release history. Several methodologies have been developed to solve the inverse problem of estimating the source and/or porous medium properties using the breakthrough curves as a known input. A common problem in the use of the breakthrough curves for this purpose is that, in most field situations, we have little or no information about the time of measurement of the breakthrough curve with respect to the time when the pollutant source becomes active. We develop an Artificial Neural Network (ANN) model to estimate the release history of a groundwater pollutant source through the use of breakthrough curves. It is assumed that the source location is known but the time dependent contaminant source strength is unknown. This temporal variation of the strength of the pollutant source is the output of the ANN model that is trained using the Levenberg-Marquardt algorithm utilizing synthetically generated breakthrough curves as inputs. A single hidden layer was used in the neural network and, to utilize just sufficient information and reduce the required sampling duration, only the upper half of the curve is used as the input pattern. The second objective of this work was to identify the aquifer parameters. An ANN model was developed to estimate the longitudinal and transverse dispersion coefficients following a philosophy similar to the one used earlier. Performance of the trained ANN model is evaluated for a 3-Dimensional case, first with perfect data and then with erroneous data with an error level up to 10 percent. Since the solution is highly sensitive to the errors in the input data, instead of using the raw data, we smoothen the upper half of the erroneous breakthrough curve by approximating it with a fourth order polynomial which is used as the input pattern for the ANN model. The main advantage of the proposed model is that it requires only the upper half of the breakthrough curve and, in addition to minimizing the effect of uncertainties in the tail ends of the breakthrough curve, is capable of estimating both the release history and aquifer parameters reasonably well. Results for the case with erroneous data having different error levels demonstrate the practical applicability and robustness of the ANN models. It is observed that with increase in the error level, the correlation coefficient of the training, testing and validation regressions tends to decrease, although the value stays within acceptable limits even for reasonably large error levels.

Characteristics and Treatment of Breakthrought Pain (BTcP) in Palliative Care

PubMed Central

Husic, Samir; Imamovic, Semir; Matic, Srecko; Sukalo, Aziz

2017-01-01

Introduction: This research was to follow characteristics of breakthrough pain caused by cancer (BTcP) and other most common sympthoms (ESAS) at patients in advanced stage of cancer disease in palliative care. Patients and methods: Prospective study included 433 patients which were treated in Palliative Care Centre in UKC Tuzla, Bosnia and Herzegovina. Group 1 was consisted of 353 patients whose basal cancer pain of intensity 4-7 NRS was treated weak opiates (basal analgetic- fixed combination of tramadol/paracetamol (37.5 mg/325 mg) in initial dose 3x1tbl for pain intensity 4, to 4x2tbl (for pain intensity 7). In Group 2 (80 patients) basal pain of intensity 8-10 was treated strong opiates as basal analgetic (oral morphine and transdermal fentanil). If the previous day were 2 or more breakthrough pain that required ‘’rescue dose’’ of analgetics (tramadol 50-100 mg orally in group 1 ie. Oral morphine 8-12 mg in the group 2), the dose of basal analgetic was increased. Results: The total number of reported breakthrough pain in all 433 patients for 10 days of treatment was 3 369 (0.78 BTcP /per patient/day), where at Group 1 patients showed significantly lower BTcP (0.56 BTcP/patient/day). The average intensity of BTcP was 5.91 where in the Group1 was 4.51 while in the Group 2 8.04. 582 (17.28%) was rated grade 7, of which 539 were successfully coupled by strong and 43 (7.39%) successfully coupled by weak opiates. From 556 BTcP who were rated with 8, 540 of them were coupled strong and only 16 successfully coupled by weak opiates. 1967 (58.39 %) of breakthrough pain has occured in the evening hours (18-06 h), while 1402 (41.62%) BTCP occured during day hours (06-18h). Most (1290 or 38.29%) of breakthrough pain lasted less than 10 minutes, 882 (26.18%) between 16 and 20 minutes, 752 (22.32%) between 11 and 15 minutes, 407 (12.8%) between 21 and 30 minutes and 38 (1.13%) lasted longer than 20 minutes. Conclusion: Duriong our study, we noted a relatively large number of breakthrough pain with lower intensity (3-6) in patients treated with weak opiates, which are also adversely affected patients satisfaction with pain treatment and required additional doses of analgetics. In the small percentage is possible the breakthrough pain of stronger intensity (7-8) treat by maximum doses of weak opiates. PMID:28974843

Gas breakthrough and emission through unsaturated compacted clay in landfill final cover

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, C.W.W.; Chen, Z.K.; Coo, J.L.

Highlights: • Explore feasibility of unsaturated clay as a gas barrier in landfill cover. • Gas breakthrough pressure increases with clay thickness and degree of saturation. • Gas emission rate decreases with clay thickness and degree of saturation. • A 0.6 m-thick clay layer may be sufficient to meet gas emission rate limit. - Abstract: Determination of gas transport parameters in compacted clay plays a vital role for evaluating the effectiveness of soil barriers. The gas breakthrough pressure has been widely studied for saturated swelling clay buffer commonly used in high-level radioactive waste disposal facility where the generated gas pressuremore » is very high (in the order of MPa). However, compacted clay in landfill cover is usually unsaturated and the generated landfill gas pressure is normally low (typically less than 10 kPa). Furthermore, effects of clay thickness and degree of saturation on gas breakthrough and emission rate in the context of unsaturated landfill cover has not been quantitatively investigated in previous studies. The feasibility of using unsaturated compacted clay as gas barrier in landfill covers is thus worthwhile to be explored over a wide range of landfill gas pressures under various degrees of saturation and clay thicknesses. In this study, to evaluate the effectiveness of unsaturated compacted clay to minimize gas emission, one-dimensional soil column tests were carried out on unsaturated compacted clay to determine gas breakthrough pressures at ultimate limit state (high pressure range) and gas emission rates at serviceability limit state (low pressure range). Various degrees of saturation and thicknesses of unsaturated clay sample were considered. Moreover, numerical simulations were carried out using a coupled gas–water flow finite element program (CODE-BRIGHT) to better understand the experimental results by extending the clay thickness and varying the degree of saturation to a broader range that is typical at different climate conditions. The results of experimental study and numerical simulation reveal that as the degree of saturation and thickness of clay increase, the gas breakthrough pressure increases but the gas emission rate decreases significantly. Under a gas pressure of 10 kPa (the upper bound limit of typical landfill gas pressure), a 0.6 m or thicker compacted clay is able to prevent gas breakthrough at degree of saturation of 60% or above (in humid regions). Furthermore, to meet the limit of gas emission rate set by the Australian guideline, a 0.6 m-thick clay layer may be sufficient even at low degree of saturation (i.e., 10% like in arid regions)« less

Removal of emerging pharmaceutical contaminants by adsorption in a fixed-bed column: A review.

PubMed

Ahmed, M J; Hameed, B H

2018-03-01

Pharmaceutical pollutants substantially affect the environment; thus, their treatments have been the focus of many studies. In this article, the fixed-bed adsorption of pharmaceuticals on various adsorbents was reviewed. The experimental breakthrough curves of these pollutants under various flow rates, inlet concentrations, and bed heights were examined. Fixed-bed data in terms of saturation uptakes, breakthrough time, and the length of the mass transfer zone were included. The three most popular breakthrough models, namely, Adams-Bohart, Thomas, and Yoon-Nelson, were also reviewed for the correlation of breakthrough curve data along with the evaluation of model parameters. Compared with the Adams-Bohart model, the Thomas and Yoon-Nelson more effectively predicted the breakthrough data for the studied pollutants. Copyright © 2017 Elsevier Inc. All rights reserved.

CO2 breakthrough pressure and permeability for unsaturated low-permeability sandstone of the Ordos Basin

NASA Astrophysics Data System (ADS)

Zhao, Yan; Yu, Qingchun

2017-07-01

With rising threats from greenhouse gases, capture and injection of CO2 into suitable underground formations is being considered as a method to reduce anthropogenic emissions of CO2 to the atmosphere. As the injected CO2 will remain in storage for hundreds of years, the safety of CO2 geologic sequestration is a major concern. The low-permeability sandstone of the Ordos Basin in China is regarded as both caprock and reservoir rock, so understanding the breakthrough pressure and permeability of the rock is necessary. Because part of the pore volume experiences a non-wetting phase during the CO2 injection and migration process, the rock may be in an unsaturated condition. And if accidental leakage occurs, CO2 will migrate up into the unsaturated zone. In this study, breakthrough experiments were performed at various degrees of water saturation with five core samples of low-permeability sandstone obtained from the Ordos Basin. The experiments were conducted at 40 °C and pressures of >8 MPa to simulate the geological conditions for CO2 sequestration. The results indicate that the degree of water saturation and the pore structure are the main factors affecting the rock breakthrough pressure and permeability, since the influence of calcite dissolution and clay mineral swelling during the saturation process is excluded. Increasing the average pore radius or most probable pore radius leads to a reduction in the breakthrough pressure and an increase by several orders of magnitude in scCO2 effective permeability. In addition, the breakthrough pressure rises and the scCO2 effective permeability decreases when the water saturation increases. However, when the average pore radius is greater than 0.151 μm, the degree of water saturation will has a little effect on the breakthrough pressure. On this foundation, if the most probable pore radius of the core sample reaches 1.760 μm, the breakthrough pressure will not be impacted by the increasing water saturation. We establish correlations between (1) the breakthrough pressure and average pore radius or most probable pore radius, (2) the breakthrough pressure and scCO2 effective permeability, (3) the breakthrough pressure and water saturation, and (4) the scCO2 effective permeability and water saturation. This study provides practical information for further studies of CO2 sequestration as well as the caprock evaluation.

Evanescent wave fluorescence biosensors: Advances of the last decade

PubMed Central

Taitt, Chris Rowe; Anderson, George P.; Ligler, Frances S.

2015-01-01

Biosensor development has been a highly dynamic field of research and has progressed rapidly over the past two decades. The advances have accompanied the breakthroughs in molecular biology, nanomaterial sciences, and most importantly computers and electronics. The subfield of evanescent wave fluorescence biosensors has also matured dramatically during this time. Fundamentally, this review builds on our earlier 2005 review. While a brief mention of seminal early work will be included, this current review will focus on new technological developments as well as technology commercialized in just the last decade. Evanescent wave biosensors have found a wide array applications ranging from clinical diagnostics to biodefense to food testing; advances in those applications and more are described herein. PMID:26232145

The economic viability of pursuing a space power system concept

NASA Technical Reports Server (NTRS)

Hazelrigg, G. A., Jr.

1977-01-01

The development of a space power system requires no fundamental technological breakthroughs. There are, however, uncertainties regarding the degree to which necessary developments can be achieved or exceeded. An analysis is conducted concerning the implementation of a 5000 MW space-based solar power system based on photovoltaic conversion of solar energy to electrical energy. The solar array is about 13 km long and 5 km wide. Placed in geosynchronous orbit, it provides power to the earth for 30 years. Attention is given to the economic feasibility of a space power system, a risk analysis for space power systems, and the use of the presented methodology for comparing alternative technology development programs.

From Wheatstone to Cameron and beyond: overview in 3-D and 4-D imaging technology

NASA Astrophysics Data System (ADS)

Gilbreath, G. Charmaine

2012-02-01

This paper reviews three-dimensional (3-D) and four-dimensional (4-D) imaging technology, from Wheatstone through today, with some prognostications for near future applications. This field is rich in variety, subject specialty, and applications. A major trend, multi-view stereoscopy, is moving the field forward to real-time wide-angle 3-D reconstruction as breakthroughs in parallel processing and multi-processor computers enable very fast processing. Real-time holography meets 4-D imaging reconstruction at the goal of achieving real-time, interactive, 3-D imaging. Applications to telesurgery and telemedicine as well as to the needs of the defense and intelligence communities are also discussed.

A quasi-Delphi study on technological barriers to the uptake of hydrogen as a fuel for transport applications-Production, storage and fuel cell drivetrain considerations

NASA Astrophysics Data System (ADS)

Hart, David; Anghel, Alexandra T.; Huijsmans, Joep; Vuille, François

The introduction of hydrogen in transport, particularly using fuel cell vehicles, faces a number of technical and non-technical hurdles. However, their relative importance is unclear, as are the levels of concern accorded them within the expert community conducting research and development within this area. To understand what issues are considered by experts working in the field to have significant potential to slow down or prevent the introduction of hydrogen technology in transport, a study was undertaken, primarily during 2007. Three key technology areas within hydrogen transport were selected - hydrogen storage, fuel cell drivetrains, and small-scale hydrogen production - and interviews with selected experts conducted. Forty-nine experts from 34 organisations within the fuel cell, automotive, industrial gas and other related industries participated, in addition to some key academic and government figures. The survey was conducted in China, Japan, North America and Europe, and analysed using conventional mathematical techniques to provide weighted and averaged rankings of issues viewed as important by the experts. It became clear both from the interviews and the subsequent analysis that while a primary concern in China was fundamental technical performance, in the other regions cost and policy were rated more highly. Although a few individual experts identified possible technical showstoppers, the overall message was that pre-commercial hydrogen fuel cell vehicles could realistically be on the road in tens of thousands within 5 years, and that full commercialisation could take place within 10-15 years, without the need for radical technical breakthroughs. Perhaps surprisingly, the performance of hydrogen storage technologies was not viewed as a showstopper, though cost was seen as a significant challenge. Overall, however, coherent policy development was more frequently identified as a major issue to address.

Nanotechnology-Based Performance Improvements For Portland Cement Concrete - Phase I

DOT National Transportation Integrated Search

2012-08-16

A fundamental understanding of the nano-structure of Portland cement concrete (PCC) is the key to realizing significant breakthroughs regarding high performance and susta : (MBTC 2095/3004) using molecular dynamics (MD) provided new understanding of ...

Hydrologic behavior of two engineered barriers following extreme wetting.

PubMed

Porro, I

2001-01-01

Many engineered barriers are expected to function for hundreds of years or longer. Over the course of time, it is likely that some barriers will experience infiltration to the point of breakthrough. This study compares the recovery from breakthrough of two storage-evapotranspiration type engineered barriers. Replicates of test plots comprising thick soil and capillary-biobarrier covers were wetted to breakthrough in 1997. Test plots were kept cleared of vegetation to maximize hydrologic stress during recovery. Following cessation of drainage resulting from the wetting irrigations, water storage levels in all plots were at elevated levels compared with pre-irrigation levels. As a result, infiltration of melting snow during the subsequent spring overloaded the storage capacity and produced drainage in all plots. Relatively rapid melting of accumulated snowfall produced the most significant infiltration events each year during the study. Capillary barriers yielded less total drainage than thick soil barriers. By limiting drainage, capillary barriers increased water storage in the upper portions of the test plots, which led to increased evaporation from the capillary barrier plots compared with thick soil plots. Increased evaporation in the capillary barrier plots allowed more water to infiltrate in the second season following the wetting tests without triggering drainage. All thick soil plots again yielded drainage in the second season. Within two years of intentionally induced breakthrough, evaporation alone (without transpiration) restored the capability of the capillary barrier covers to function as intended, although water storage in these covers remained at elevated levels.

Aldosterone breakthrough during aliskiren, valsartan, and combination (aliskiren + valsartan) therapy.

PubMed

Bomback, Andrew S; Rekhtman, Yelena; Klemmer, Philip J; Canetta, Pietro A; Radhakrishnan, Jai; Appel, Gerald B

2012-01-01

Aldosterone levels increase in 30%-40% of patients on angiotensin-converting enzyme inhibitors and/or angiotensin receptor blockers over the long term. This "aldosterone breakthrough" may carry important clinical consequences given aldosterone's nonepithelial, pro-fibrotic actions. The renin inhibitor, aliskiren, by suppressing the renin-angiotensin-aldosterone system (RAAS) proximally, may limit breakthrough compared to conventional RAAS blockade. This open-label study (NCT01129557) randomized subjects to aliskiren 300 mg daily (A), valsartan 320 mg daily (V), or aliskiren 150 mg + valsartan 160 mg daily (A+V) for 9 months. Eligible subjects had proteinuria >300 mg/day, estimated glomerular filtration rate (eGFR) >45 mL/min/1.73 m(2), and systolic blood pressure (BP) >130 or diastolic BP >80 mm Hg. Serum and 24-hour urine aldosterone (indexed to 24-hour urine Na) were checked before initiation of therapy and at 3, 6, and 9 months. Aldosterone breakthrough was defined as a sustained increase from baseline aldosterone by study end. The study was intended to enroll 120 subjects but was terminated early by the sponsor. We present here the results of 33 subjects who completed the protocol, of which 12 were randomized to A, 11 were randomized to V, and 10 were randomized to A+V. Mean baseline eGFR was 75.5 (±23.3) mL/min/1.73 m(2); baseline proteinuria was 3104 (±2943) mg/day; and baseline BP was 134.7 (±10.5)/84.8 (±8.4) mm Hg. Three (27%) subjects on V, three (25%) subjects on A, and three (30%) subjects on A+V had aldosterone breakthrough. Mean proteinuria reduction was 31% from baseline in all subjects: 30% in subjects with breakthrough vs. 32% in subjects without breakthrough. Mean BP reduction was 11.0/8.8 mm Hg in all subjects: 8.4/6.1 mm Hg in subjects with breakthrough vs. 12.0/9.8 mm Hg in subjects without breakthrough. Aliskiren, alone or in combination with valsartan, did not reduce the incidence of aldosterone breakthrough in subjects with hypertension and proteinuria compared with conventional RAAS blockade. Copyright © 2012 American Society of Hypertension. Published by Elsevier Inc. All rights reserved.

[RNA interference library research progress and its application in cancer research].

PubMed

Zhao, Ning; Cai, Li

2013-02-01

RNA interference is a homologous mRNA special degradation phenomenon which is caused by the double-stranded RNA. RNAi library is a pooled library that is artificially constructed using RNAi technology. As RNAi library has made a major breakthrough in the field of genetic research, it has been widely used in the field of medical research, especially in the field of cancer research. This review discussed the research progress of RNAi library and its applications in cancer research.

The Global Emergency Observation and Warning System

NASA Technical Reports Server (NTRS)

Bukley, Angelia P.; Mulqueen, John A.

1994-01-01

Based on an extensive characterization of natural hazards, and an evaluation of their impacts on humanity, a set of functional technical requirements for a global warning and relief system was developed. Since no technological breakthroughs are required to implement a global system capable of performing the functions required to provide sufficient information for prevention, preparedness, warning, and relief from natural disaster effects, a system is proposed which would combine the elements of remote sensing, data processing, information distribution, and communications support on a global scale for disaster mitigation.

Multi-family update to the passive solar construction handbook

NASA Astrophysics Data System (ADS)

Howard, B. D.; Callahan, K. D.

1983-11-01

Builders and developers will accept passive solar construction and designs for integration with their existing practice if accurate and detailed plans of actual, proven passive solar subsystems and assemblies are made available to them. A Passive Solar Construction Handbook was developed. It focuses primarily upon single family homes. The multifamily update of the Handbook, is described and examples of the valuable builder information are shown. It represents a new breakthrough in DOE sponsored projects, performing a Technology Transfer on a most useful level.

NREL Spectrum of Innovation

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2011-02-25

There are many voices calling for a future of abundant clean energy. The choices are difficult and the challenges daunting. How will we get there? The National Renewable Energy Laboratory integrates the entire spectrum of innovation including fundamental science, market relevant research, systems integration, testing and validation, commercialization and deployment. The innovation process at NREL is interdependent and iterative. Many scientific breakthroughs begin in our own laboratories, but new ideas and technologies come to NREL at any point along the innovation spectrum to be validated and refined for commercial use.

Solar power satellite status report

NASA Technical Reports Server (NTRS)

Davis, H. P.

1977-01-01

The development of a solar power satellite program is considered. It is suggested that the solar power satellite is an engineering rather than a science program - that is, that no scientific breakthroughs are required before initiating the project. Available technology is examined, and several key questions are discussed: how efficient is microwave transfer of energy; how feasible is construction in space; and will the advantages of continuous insolation compensate for the costs of building a solar power plant in synchronous orbit 23,000 miles above the earth.

NREL Spectrum of Innovation

ScienceCinema

None

2018-05-11

There are many voices calling for a future of abundant clean energy. The choices are difficult and the challenges daunting. How will we get there? The National Renewable Energy Laboratory integrates the entire spectrum of innovation including fundamental science, market relevant research, systems integration, testing and validation, commercialization and deployment. The innovation process at NREL is interdependent and iterative. Many scientific breakthroughs begin in our own laboratories, but new ideas and technologies come to NREL at any point along the innovation spectrum to be validated and refined for commercial use.

Guidance and Control Architecture Design and Demonstration for Low Ballistic Coefficient Atmospheric Entry

NASA Technical Reports Server (NTRS)

Swei, Sean

2014-01-01

We propose to develop a robust guidance and control system for the ADEPT (Adaptable Deployable Entry and Placement Technology) entry vehicle. A control-centric model of ADEPT will be developed to quantify the performance of candidate guidance and control architectures for both aerocapture and precision landing missions. The evaluation will be based on recent breakthroughs in constrained controllability/reachability analysis of control systems and constrained-based energy-minimum trajectory optimization for guidance development operating in complex environments.

History highlights and future trends of infrared sensors

NASA Astrophysics Data System (ADS)

Corsi, Carlo

2010-10-01

Infrared (IR) technologies (materials, devices and systems) represent an area of excellence in science and technology and, even if they have been generally confined to a selected scientific community, they have achieved technological and scientific highlights constituting 'innovation drivers' for neighbouring disciplines, especially in the sensors field. The development of IR sensors, initially linked to astronomical observations, since World War II and for many years has been fostered essentially by defence applications, particularly thermo-vision and, later on, smart vision and detection, for surveillance and warning. Only in the last few decades, the impact of silicon technology has changed the development of IR detectors dramatically, with the advent of integrated signal read-outs and the opening of civilian markets (EO communications, biomedical, environmental, transport and energy applications). The history of infrared sensors contains examples of real breakthroughs, particularly true in the case of focal plane arrays that first appeared in the late 1970s, when the superiority of bi-dimensional arrays for most applications pushed the development of technologies providing the highest number of pixels. An impressive impulse was given to the development of FPA arrays by integration with charge coupled devices (CCD), with strong competition from different technologies (high-efficiency photon sensors, Schottky diodes, multi-quantum wells and, later on, room temperature microbolometers/cantilevers). This breakthrough allowed the development of high performance IR systems of small size, light weight and low cost - and therefore suitable for civil applications - thanks to the elimination of the mechanical scanning system and the progressive reduction of cooling requirements (up to the advent of microbolometers, capable of working at room temperature). In particular, the elimination of cryogenic cooling allowed the development and commercialisation of IR Smart Sensors; strategic components for important areas like transport, environment, territory control and security. Infrared history is showing oscillations and variations in raw materials, technology processes and in device design and characteristics. Various technologies oscillating between the two main detection techniques (photon and bolometer effects) have been developed and evaluated as the best ones, depending on the system use as well as expectable performances. Analysis of the 'waving change' in the history of IR sensor technologies is given with the fundamental theory of the various approaches. Highlights of the main historical IR developments and their impact and use in civil and military applications is shown and correlated with the leading technology of silicon microelectronics: scientific and economic comparisons are given and emerging technologies and forecasting of future developments are outlined.

Atomic force microscope image contrast mechanisms on supported lipid bilayers.

PubMed

Schneider, J; Dufrêne, Y F; Barger, W R; Lee, G U

2000-08-01

This work presents a methodology to measure and quantitatively interpret force curves on supported lipid bilayers in water. We then use this method to correlate topographic imaging contrast in atomic force microscopy (AFM) images of phase-separated Langmuir-Blodgett bilayers with imaging load. Force curves collected on pure monolayers of both distearoylphosphatidylethanolamine (DSPE) and monogalactosylethanolamine (MGDG) and dioleoylethanolamine (DOPE) deposited at similar surface pressures onto a monolayer of DSPE show an abrupt breakthrough event at a repeatable, material-dependent force. The breakthrough force for DSPE and MGDG is sizable, whereas the breakthrough force for DOPE is too small to measure accurately. Contact-mode AFM images on 1:1 mixed monolayers of DSPE/DOPE and MGDG/DOPE have a high topographic contrast at loads between the breakthrough force of each phase, and a low topographic contrast at loads above the breakthrough force of both phases. Frictional contrast is inverted and magnified at loads above the breakthrough force of both phases. These results emphasize the important role that surface forces and mechanics can play in imaging multicomponent biomembranes with AFM.

Coherent Anti-Stokes Raman Scattering Spectroscopy of Single Molecules in Solution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sunney Xie, Wei Min, Chris Freudiger, Sijia Lu

2012-01-18

During this funding period, we have developed two breakthrough techniques. The first is stimulated Raman scattering microscopy, providing label-free chemical contrast for chemical and biomedical imaging based on vibrational spectroscopy. Spontaneous Raman microscopy provides specific vibrational signatures of chemical bonds, but is often hindered by low sensitivity. We developed a three-dimensional multiphoton vibrational imaging technique based on stimulated Raman scattering (SRS). The sensitivity of SRS imaging is significantly greater than that of spontaneous Raman microscopy, which is achieved by implementing high-frequency (megahertz) phase-sensitive detection. SRS microscopy has a major advantage over previous coherent Raman techniques in that it offers background-freemore » and readily interpretable chemical contrast. We demonstrated a variety of biomedical applications, such as differentiating distributions of omega-3 fatty acids and saturated lipids in living cells, imaging of brain and skin tissues based on intrinsic lipid contrast, and monitoring drug delivery through the epidermis. This technology offers exciting prospect for medical imaging. The second technology we developed is stimulated emission microscopy. Many chromophores, such as haemoglobin and cytochromes, absorb but have undetectable fluorescence because the spontaneous emission is dominated by their fast non-radiative decay. Yet the detection of their absorption is difficult under a microscope. We use stimulated emission, which competes effectively with the nonradiative decay, to make the chromophores detectable, as a new contrast mechanism for optical microscopy. We demonstrate a variety of applications of stimulated emission microscopy, such as visualizing chromoproteins, non-fluorescent variants of the green fluorescent protein, monitoring lacZ gene expression with a chromogenic reporter, mapping transdermal drug distribu- tions without histological sectioning, and label-free microvascular imaging based on endogenous contrast of haemoglobin. For all these applications, sensitivity is orders of magnitude higher than for spontaneous emission or absorption contrast, permitting nonfluorescent reporters for molecular imaging. Although we did not accomplish the original goal of detecting single-molecule by CARS, our quest for high sensitivity of nonlinear optical microscopy paid off in providing the two brand new enabling technologies. Both techniques were greatly benefited from the use of high frequency modulation for microscopy, which led to orders of magnitude increase in sensitivity. Extensive efforts have been made on optics and electronics to accomplish these breakthroughs.« less

Research on key technology of space laser communication network

NASA Astrophysics Data System (ADS)

Chang, Chengwu; Huang, Huiming; Liu, Hongyang; Gao, Shenghua; Cheng, Liyu

2016-10-01

Since the 21st century, Spatial laser communication has made a breakthrough development. Europe, the United States, Japan and other space powers have carried out the test of spatial laser communication technology on-orbit, and put forward a series of plans. In 2011, China made the first technology demonstration of satellite-ground laser communication carried by HY-2 satellite. Nowadays, in order to improve the transmission rate of spatial network, the topic of spatial laser communication network is becoming a research hotspot at home and abroad. This thesis, from the basic problem of spatial laser communication network to solve, analyzes the main difference between spatial network and ground network, which draws forth the key technology of spatial laser communication backbone network, and systematically introduces our research on aggregation, addressing, architecture of spatial network. From the perspective of technology development status and trends, the thesis proposes the development route of spatial laser communication network in stages. So as to provide reference about the development of spatial laser communication network in China.

Prospective study of luminous radiation associated technology photosensitive compounds for treatment of diseases

NASA Astrophysics Data System (ADS)

Pires-Santos, Gustavo M.; de Oliveira, Susana C. P. S.; Monteiro, Juliana S. C.; Sampaio, Fernando José P.; Brugnera, Aldo; Zanin, Fátima Antônia A.; Almeida, Paulo; Pinheiro, Antônio L. B.

2015-03-01

Prospective studies are based on the analysis of patent documents and aims to assess the both technological history and development providing innovation opportunities. This study was a technological prospection mapping aiming to identify breakthrough in PDT and the new possibilities of the technology. Therefore, research in the bank patent 'Spacenet Patent Search' was performed using determinants descriptors associated with the theme: 'A61K41', 'A61N5 / 06'. Were analyzed in this study 326 documents. In evaluating these patents, it was possible to observe an increase in the number of deposits over time, with peak between 1990 and 2000. The highest number of inventors of this area are part of the private sector and the US appear as main producer of technology. It was also observed that blue light, porphyrins and their derivatives are the main topics. It may be concluded that PDT still offers a large opportunity for growth as several wavelengths, and photosensitizers that may be used in the technique.

ACTS High-Speed VSAT Demonstrated

NASA Technical Reports Server (NTRS)

Tran, Quang K.

1999-01-01

The Advanced Communication Technology Satellite (ACTS) developed by NASA has demonstrated the breakthrough technologies of Ka-band transmission, spot-beam antennas, and onboard processing. These technologies have enabled the development of very small and ultrasmall aperture terminals (VSAT s and USAT's), which have capabilities greater than have been possible with conventional satellite technologies. The ACTS High Speed VSAT (HS VSAT) is an effort at the NASA Glenn Research Center at Lewis Field to experimentally demonstrate the maximum user throughput data rate that can be achieved using the technologies developed and implemented on ACTS. This was done by operating the system uplinks as frequency division multiple access (FDMA), essentially assigning all available time division multiple access (TDMA) time slots to a single user on each of two uplink frequencies. Preliminary results show that, using a 1.2-m antenna in this mode, the High Speed VSAT can achieve between 22 and 24 Mbps of the 27.5 Mbps burst rate, for a throughput efficiency of 80 to 88 percent.

Secondary oil recovery from selected Carter sandstone oilfields--Black Warrior Basin, Alabama. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, J.C.

1995-02-01

Producibility problems, such as low reservoir pressure and reservoir heterogeneity, have severely limited oil production from the Central Bluff and North Fairview fields. Specific objectives for this project were: To successfully apply detailed geologic and engineering studies with conventional waterflood technologies to these fields in an effort to increase the ultimate economic recovery of oil from Carter sandstone fields; To extensively model, test and evaluate these technologies; thereby, developing a sound methodology for their use and optimization; and To team with Advanced Resources International and the US DOE to assimilate and transfer the information and results gathered from this studymore » to other oil companies to encourage the widespread use of these technologies. At Central Bluff, water injection facilities were constructed and water injection into one well began in January 1993. Oil response from the waterflood has been observed at both producing wells. One of the producing wells has experienced early water breakthrough and a concomitant drop in secondary oil rate. A reservoir modeling study was initiated to help develop an appropriate operating strategy for Central Bluff. For the North Fairview unit waterflood, a previously abandoned well was converted for water injection which began in late June 1993. The reservoir is being re-pressurized, and unit water production has remained nil since flood start indicating the possible formation of an oil bank. A reservoir simulation to characterize the Carter sand at North Fairview was undertaken and the modeling results were used to forecast field performance. The project was terminated due to unfavorable economics. The factors contributing to this decision were premature water breakthrough at Central Bluff, delayed flood response at North Fairview and stalled negotiations at the South Bluff site.« less

Modeling of the adsorption breakthrough behaviors of Pb2+ in a fixed bed of ETS-10 adsorbent.

PubMed

Lv, Lu; Zhang, Yan; Wang, Kean; Ray, Ajay K; Zhao, X S

2008-09-01

On the basis of experimental breakthrough curves of lead ion adsorption on ETS-10 particles in a fixed-bed column, we simulated the breakthrough curves using the two-phase homogeneous diffusion model (TPHDM). Three important model parameters, namely the external mass-transfer coefficient (k(f)), effective intercrystal diffusivity (D(e)), and axial dispersion coefficient (D(L)), were optimally found to be 8.33x10(-5) m/s, 2.57x10(-10) m(2)/s, and 1.93x10(-10) m(2)/s, respectively. A good agreement was observed between the numerical simulation and the experimental results. Sensitivity analysis revealed that the value of D(e) dictates the model performance while the magnitude of k(f) primarily affects the initial breakthrough point of the breakthrough curves.

NASA breakthrough propulsion physics program

NASA Astrophysics Data System (ADS)

Millis, Marc G.

1999-05-01

In 1996, NASA established the Breakthrough Propulsion Physics program to seek the ultimate breakthroughs in space transportation: propulsion that requires no propellant mass, propulsion that attains the maximum transit speeds physically possible, and breakthrough methods of energy production to power such devices. Topics of interest include experiments and theories regarding the coupling of gravity and electromagnetism, vacuum fluctuation energy, warp drives and wormholes, and superluminal quantum effects. Because these propulsion goals are presumably far from fruition, a special emphasis is to identify affordable, near-term, and credible research that could make measurable progress toward these propulsion goals. The methods of the program and the results of the 1997 workshop are presented. This Breakthrough Propulsion Physics program, managed by Lewis Research Center, is one part of a comprehensive, long range Advanced Space Transportation Plan managed by Marshall Space Flight Center.

NASA Breakthrough Propulsion Physics Program

NASA Technical Reports Server (NTRS)

Millis, Marc G.

1998-01-01

In 1996, NASA established the Breakthrough Propulsion Physics program to seek the ultimate breakthroughs in space transportation: propulsion that requires no propellant mass, propulsion that attains the maximum transit speeds physically possible, and breakthrough methods of energy production to power such devices. Topics of interest include experiments and theories regarding the coupling of gravity and electromagnetism, vacuum fluctuation energy, warp drives and worm-holes, and superluminal quantum effects. Because these propulsion goals are presumably far from fruition, a special emphasis is to identify affordable, near-term, and credible research that could make measurable progress toward these propulsion goals. The methods of the program and the results of the 1997 workshop are presented. This Breakthrough Propulsion Physics program, managed by Lewis Research Center, is one part of a comprehensive, long range Advanced Space Transportation Plan managed by Marshall Space Flight Center.

The New Millennium Program power technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chmielewski, A.B.; Das, A.; Cassapakis, C.

1996-12-31

The New Millennium Program (NMP) has been established to accelerate the infusion of breakthrough technologies into NASA space science missions. The goal of this technology infusion is to fulfill the NASA vision of frequent, low-cost missions to deep space and to plant Earth. Power is one of the most important keys to cost-effective space science missions. The power subsystem comprises over 25 percent of the mass of a typical space orbiter type spacecraft. The problems of power will become even more acute in the new millennium as deep space missions are asked to go farther from the Sun and getmore » to their destinations faster. Several power technology proposals were submitted to the NMP through its Modular and Multifunctional Systems Integrated Product Development Team (IPDT). The proposals described in this paper received the most consideration and in several cases resulted in the technology being selected for flight on one of the NMP missions. The technologies discussed here are: SCARLET array, Light Flexible array, lithium ion battery, cold temperature battery, inflatable concentrators and a related technology -- Multifunctional Structures.« less

Emerging electro-optical technologies for defense applications

NASA Astrophysics Data System (ADS)

Venkateswarlu, Ronda; Ser, W.; Er, Meng H.; Chan, Philip

1999-11-01

Technological breakthroughs in the field of imaging and non- imaging sensor sand the related signal processors helped the military users to achieve 'force multiplication'. Present day 'smart-weapon systems' are being converted to 'brilliant-weapon systems' to bridge the gap until the most potent new 'fourth generation systems' come on line based on nanotechnology. The recent military tactics have evolved to take advantage of ever improving technologies to improve the quality and performance over time. The drive behind these technologies is to get a first-pass-mission-success against the target with negligible collateral damage, protecting property and the lives of non-combatants. These technologies revolve around getting target information, detection, designation, guidance, aim-point selection, and mission accomplishment. The effectiveness of these technologies is amply demonstrated during recent wars. This paper brings out the emerging trends in visible/IR/radar smart-sensors and the related signal processing technologies that lead to brilliant guided weapon systems. The purpose of this paper is to give an overview to the readers about futuristic systems. This paper also addresses various system configurations including sensor-fusion.

Flexible quality of service model for wireless body area sensor networks.

PubMed

Liao, Yangzhe; Leeson, Mark S; Higgins, Matthew D

2016-03-01

Wireless body area sensor networks (WBASNs) are becoming an increasingly significant breakthrough technology for smart healthcare systems, enabling improved clinical decision-making in daily medical care. Recently, radio frequency ultra-wideband technology has developed substantially for physiological signal monitoring due to its advantages such as low-power consumption, high transmission data rate, and miniature antenna size. Applications of future ubiquitous healthcare systems offer the prospect of collecting human vital signs, early detection of abnormal medical conditions, real-time healthcare data transmission and remote telemedicine support. However, due to the technical constraints of sensor batteries, the supply of power is a major bottleneck for healthcare system design. Moreover, medium access control (MAC) needs to support reliable transmission links that allow sensors to transmit data safely and stably. In this Letter, the authors provide a flexible quality of service model for ad hoc networks that can support fast data transmission, adaptive schedule MAC control, and energy efficient ubiquitous WBASN networks. Results show that the proposed multi-hop communication ad hoc network model can balance information packet collisions and power consumption. Additionally, wireless communications link in WBASNs can effectively overcome multi-user interference and offer high transmission data rates for healthcare systems.

Intervertebral disc detection in X-ray images using faster R-CNN.

PubMed

Ruhan Sa; Owens, William; Wiegand, Raymond; Studin, Mark; Capoferri, Donald; Barooha, Kenneth; Greaux, Alexander; Rattray, Robert; Hutton, Adam; Cintineo, John; Chaudhary, Vipin

2017-07-01

Automatic identification of specific osseous landmarks on the spinal radiograph can be used to automate calculations for correcting ligament instability and injury, which affect 75% of patients injured in motor vehicle accidents. In this work, we propose to use deep learning based object detection method as the first step towards identifying landmark points in lateral lumbar X-ray images. The significant breakthrough of deep learning technology has made it a prevailing choice for perception based applications, however, the lack of large annotated training dataset has brought challenges to utilizing the technology in medical image processing field. In this work, we propose to fine tune a deep network, Faster-RCNN, a state-of-the-art deep detection network in natural image domain, using small annotated clinical datasets. In the experiment we show that, by using only 81 lateral lumbar X-Ray training images, one can achieve much better performance compared to traditional sliding window detection method on hand crafted features. Furthermore, we fine-tuned the network using 974 training images and tested on 108 images, which achieved average precision of 0.905 with average computation time of 3 second per image, which greatly outperformed traditional methods in terms of accuracy and efficiency.

Temperature induced effects on the durability of MR fluids

NASA Astrophysics Data System (ADS)

Wiehe, A.; Kieburg, C.; Maas, J.

2013-02-01

Although commercial MR fluids exist for quite some time now and the feasibility as well as the advantages of the MR technology have been demonstrated for several applications by a variety of MR actuator prototypes, a sustainable market break-through of brake and clutch applications utilizing the shear mode is still missing. Essential impediments are the marginal knowledge about the durability of the MR technology. To overcome this situation, a long-term measurement system was developed for the durability analysis of MR fluid formulations within a technical relevant scale with respect to the volume of MR fluid and the transmitted torque. The focus of the presented series of measurements is given to the analysis of temperature induced effects on the durability. In this context four different failure indicators can be distinguished, namely an apparent negative viscosity, deviations in torque data obtained from different measurements as well as a pressure increase and a drop in the on-state torque. The measurement data of the present durability experiments indicate a significant dependency of the attainable energy intake density on the temperature. The aim of such durability tests is to establish a reliable data base for the industry to estimate the life-time of MR devices.

China's bullet trains facilitate market integration and mitigate the cost of megacity growth.

PubMed

Zheng, Siqi; Kahn, Matthew E

2013-04-02

Megacity growth in the developing world is fueled by a desire to access their large local labor markets. Growing megacities suffer from high levels of traffic congestion and pollution, which degrade local quality of life. Transportation technology that allows individuals to access the megacity without living within its boundaries offers potentially large social benefits, because individuals can enjoy the benefits of urban agglomeration while not paying megacity real estate rents and suffering from the city's social costs. This paper presents evidence supporting the claim that China's bullet trains are playing this role. The bullet train is regarded as one of the most significant technological breakthroughs in passenger transportation developed in the second half of the 20th century. Starting in 2007, China has introduced several new bullet trains that connect megacities such as Beijing, Shanghai, and Guangzhou with nearby cities. Through facilitating market integration, bullet trains will stimulate the development of second- and third-tier cities. By offering households and firms a larger menu of location alternatives, bullet trains help to protect the quality of life of the growing urban population. We document that this transport innovation is associated with rising real estate prices in the nearby secondary cities.

A Revolution in the Making: Advances in Materials That May Transform Future Exploration Infrastructures and Missions

NASA Technical Reports Server (NTRS)

Harris, Charles E.; Dicus, Dennis L.; Shuart, Mark J.

2001-01-01

The NASA Strategic Plan identifies the long-term goal to provide safe and affordable space access, orbital transfer, and interplanetary transportation capabilities to enable research, human exploration, and the commercial development of space; and to conduct human and robotic missions to planets and other bodies in our solar system. Numerous scientific and engineering breakthroughs will be required to develop the technology necessary to achieve this goal. Critical technologies include advanced vehicle primary and secondary structure, radiation protection, propulsion and power systems, fuel storage, electronics and devices, sensors and science instruments, and medical diagnostics and treatment. Advanced materials with revolutionary new capabilities are an essential element of each of these technologies. This paper discusses those materials best suited for aerospace vehicle structure and highlights the enormous potential of one revolutionary new material, carbon nanotubes.

Sensors, nano-electronics and photonics for the Army of 2030 and beyond

NASA Astrophysics Data System (ADS)

Perconti, Philip; Alberts, W. C. K.; Bajaj, Jagmohan; Schuster, Jonathan; Reed, Meredith

2016-02-01

The US Army's future operating concept will rely heavily on sensors, nano-electronics and photonics technologies to rapidly develop situational understanding in challenging and complex environments. Recent technology breakthroughs in integrated 3D multiscale semiconductor modeling (from atoms-to-sensors), combined with ARL's Open Campus business model for collaborative research provide a unique opportunity to accelerate the adoption of new technology for reduced size, weight, power, and cost of Army equipment. This paper presents recent research efforts on multi-scale modeling at the US Army Research Laboratory (ARL) and proposes the establishment of a modeling consortium or center for semiconductor materials modeling. ARL's proposed Center for Semiconductor Materials Modeling brings together government, academia, and industry in a collaborative fashion to continuously push semiconductor research forward for the mutual benefit of all Army partners.

The Future Medical Science and Colorectal Surgeons

PubMed Central

2017-01-01

Future medical technology breakthroughs will build from the incredible progress made in computers, biotechnology, and nanotechnology and from the information learned from the human genome. With such technology and information, computer-aided diagnoses, organ replacement, gene therapy, personalized drugs, and even age reversal will become possible. True 3-dimensional system technology will enable surgeons to envision key clinical features and will help them in planning complex surgery. Surgeons will enter surgical instructions in a virtual space from a remote medical center, order a medical robot to perform the operation, and review the operation in real time on a monitor. Surgeons will be better than artificial intelligence or automated robots when surgeons (or we) love patients and ask questions for a better future. The purpose of this paper is looking at the future medical science and the changes of colorectal surgeons. PMID:29354602

Earth benefits from space life sciences

NASA Technical Reports Server (NTRS)

Garshnek, V.; Nicogossian, A. E.; Griffiths, L.

1990-01-01

Contributions of space exploration which are widely recognized are those dealing with the impact of space technology on public health and medical services in both urban and remote rural areas. Telecommunications, image enhancement, 3-dimensional image reconstructions, miniaturization, automation, and data analysis, have transformed the delivery of medical care and have brought about a new impetus to the field of biomedicine. Many areas of medical care and biological research have been affected. These include technological breakthroughs in such areas as: (1) diagnosis, treatment, and prevention of cardiovascular diseases, (2) new approaches to the understanding of osteoporosis, (3) early detection of genetic birth defects, (4) emergency medical care, and (5) treatment of chronic metabolic disorders. These are but a few examples where technology originally developed to support space medicine or space research has been applied to solving medical and health care delivery problems on Earth.

FDA Regulation of Clinical Applications of CRISPR-CAS Gene-Editing Technology.

PubMed

Grant, Evita V

Scientists have repurposed an adaptive immune system of single cell organisms to create a new type of gene-editing tool: CRISPR (clustered regularly interspaced short palindromic repeats)-Cas technology. Scientists in China have reported its use in the genome modification of non-viable human embryos. This has ignited a spirited debate about the moral, ethical, scientific, and social implications of human germline genome engineering. There have also been calls for regulations; however, FDA has yet to formally announce its oversight of clinical applications of CRISPR-Cas systems. This paper reviews FDA regulation of previously controversial biotechnology breakthroughs, recombinant DNA and human cloning. It then shows that FDA is well positioned to regulate CRISPR-Cas clinical applications, due to its legislative mandates, its existing regulatory frameworks for gene therapies and assisted reproductive technologies, and other considerations.

The Future Medical Science and Colorectal Surgeons.

PubMed

Kim, Young Jin

2017-12-01

Future medical technology breakthroughs will build from the incredible progress made in computers, biotechnology, and nanotechnology and from the information learned from the human genome. With such technology and information, computer-aided diagnoses, organ replacement, gene therapy, personalized drugs, and even age reversal will become possible. True 3-dimensional system technology will enable surgeons to envision key clinical features and will help them in planning complex surgery. Surgeons will enter surgical instructions in a virtual space from a remote medical center, order a medical robot to perform the operation, and review the operation in real time on a monitor. Surgeons will be better than artificial intelligence or automated robots when surgeons (or we) love patients and ask questions for a better future. The purpose of this paper is looking at the future medical science and the changes of colorectal surgeons.

Assessing potential propulsion breakthroughs.

PubMed

Millis, Marc G

2005-12-01

The term, propulsion breakthrough, refers to concepts like propellantless space drives and faster-than-light travel, the kind of breakthroughs that would make interstellar exploration practical. Although no such breakthroughs appear imminent, a variety of investigations have begun. During 1996-2002 NASA supported the breakthrough propulsion physics project to examine physics in the context of breakthrough spaceflight. Three facets of these assessments are now reported: (1) predicting benefits, (2) selecting research, and (3) recent technical progress. Predicting benefits is challenging, since the breakthroughs are still only notional concepts, but energy can serve as a basis for comparison. A hypothetical space drive would require many orders of magnitude less energy than a rocket for journeys to our nearest neighboring star. Assessing research options is challenging when the goals are beyond known physics and when the implications of success are profound. To mitigate the challenges, a selection process is described where: (1) research tasks are constrained to only address the immediate unknowns, curious effects, or critical issues; (2) reliability of assertions is more important than their implications; and (3) reviewers judge credibility rather than feasibility. The recent findings of a number of tasks, some selected using this process, are discussed. Of the 14 tasks included, six reached null conclusions, four remain unresolved, and four have opportunities for sequels. A dominant theme with the sequels is research about the properties of space, inertial frames, and the quantum vacuum.

A novel procedure for purification of uridine 5'-monophosphate based on adsorption methodology using a hyper-cross-linked resin.

PubMed

Wu, Jinglan; Zhu, Hui; Liu, Yanan; Zhou, Jingwei; Zhuang, Wei; Jiao, Pengfei; Ke, Xu; Ying, Hanjie

2015-05-01

The conventional ion exchange process used for recovery of uridine 5'-monophosphate (UMP) from the enzymatic hydrolysate of RNA is environmentally harmful and cost intensive. In this work, an innovative benign process, which comprises adsorption technology and use of a hyper-cross-linked resin as a stationary phase is proposed. The adsorption properties of this kind of resin in terms of adsorption equilibrium as well as kinetics were evaluated. The influences of the operating conditions, i.e., initial UMP concentration, feed flow rate, and bed height on the breakthrough curves of UMP in the fixed bed system were investigated. Subsequently, a chromatographic column model was established and validated for the prediction of the experimentally attained breakthrough curves of UMP and the main impurity component (phosphate ion) with a real enzymatic hydrolysate of RNA as a feed mixture. At the end of this paper, the crystallization of UMP was carried out. The purity of the final product (uridine 5'-monophosphate disodium, UMPNa2) of over 99.5 % was obtained.

Breakthrough in 4π ion emission mechanism understanding in plasma focus devices.

PubMed

Sohrabi, Mehdi; Zarinshad, Arefe; Habibi, Morteza

2016-12-12

Ion emission angular distribution mechanisms in plasma focus devices (PFD) have not yet been well developed and understood being due to the lack of an efficient wide-angle ion distribution image detection system to characterize a PFD space in detail. Present belief is that the acceleration of ions points from "anode top" upwards in forward direction within a small solid angle. A breakthrough is reported in this study, by mega-size position-sensitive polycarbonate ion image detection systems invented, on discovery of 4π ion emission from the "anode top" in a PFD space after plasma pinch instability and radial run-away of ions from the "anode cathodes array" during axial acceleration of plasma sheaths before the radial phase. These two ion emission source mechanisms behave respectively as a "Point Ion Source" and a "Line Ion Source" forming "Ion Cathode Shadows" on mega-size detectors. We believe that the inventions and discoveries made here will open new horizons for advanced ion emission studies towards better mechanisms understanding and in particular will promote efficient applications of PFDs in medicine, science and technology.

Next generation paradigm for urban pluvial flood modelling, prediction, management and vulnerability reduction - Interaction between RainGain and Blue Green Dream projects

NASA Astrophysics Data System (ADS)

Maksimovic, C.

2012-04-01

The effects of climate change and increasing urbanisation call for a new paradigm for efficient planning, management and retrofitting of urban developments to increase resilience to climate change and to maximize ecosystem services. Improved management of urban floods from all sources in required. Time scale for well documented fluvial and coastal floods allows for timely response but surface (pluvial) flooding caused by intense local storms had not been given appropriate attention, Pitt Review (UK). Urban surface floods predictions require fine scale data and model resolutions. They have to be tackled locally by combining central inputs (meteorological services) with the efforts of the local entities. Although significant breakthrough in modelling of pluvial flooding was made there is a need to further enhance short term prediction of both rainfall and surface flooding. These issues are dealt with in the EU Iterreg project Rain Gain (RG). Breakthrough in urban flood mitigation can only be achieved by combined effects of advanced planning design, construction and management of urban water (blue) assets in interaction with urban vegetated areas' (green) assets. Changes in design and operation of blue and green assets, currently operating as two separate systems, is urgently required. Gaps in knowledge and technology will be introduced by EIT's Climate-KIC Blue Green Dream (BGD) project. The RG and BGD projects provide synergy of the "decoupled" blue and green systems to enhance multiple benefits to: urban amenity, flood management, heat island, biodiversity, resilience to drought thus energy requirements, thus increased quality of urban life at lower costs. Urban pluvial flood management will address two priority areas: Short Term rainfall Forecast and Short term flood surface forecast. Spatial resolution of short term rainfall forecast below 0.5 km2 and lead time of a few hours are needed. Improvements are achievable by combining data sources of raingauge networks with C-Band and X-Band radars with NWP and pluvial flood prediction models. The RG project deals with the merging and providing synergy of these technologies. Combined effects of BG technologies can totally reduce the risk of surface flooding for low return period events and up to 50-80% for high return periods. Demonstration technology testing sites for both BGD and RG projects will be established in 5 participating countries. Decision Support Systems will enhance full scale implementation of both BGD and RG project deliverables. A BGD efficiency rating scheme and training guidelines and e-learning tools will be developed. Experimental/demo sites for BDG and RG technology development and testing in Rotterdam, Paris, Berlin, Leuven and London and the expected results with concepts of RG and BGD projects and the initial results will be presented in the paper.

Technological developments and future perspectives on graphene-based metamaterials: a primer for neurosurgeons.

PubMed

Mattei, Tobias A; Rehman, Azeem A

2014-05-01

Graphene, a monolayer atomic-scale honeycomb lattice of carbon atoms, has been considered the greatest revolution in metamaterials research in the past 5 years. Its developers were awarded the Nobel Prize in Physics in 2010, and massive funding has been directed to graphene-based experimental research in the last years. For instance, an international scientific collaboration has recently received a €1 billion grant from the European Flagship Initiative, the largest amount of financial resources ever granted for a single research project in the history of modern science. Because of graphene's unique optical, thermal, mechanical, electronic, and quantum properties, the incorporation of graphene-based metamaterials to biomedical applications is expected to lead to major technological breakthroughs in the next few decades. Current frontline research in graphene technology includes the development of high-performance, lightweight, and malleable electronic devices, new optical modulators, ultracapacitors, molecular biodevices, organic photovoltaic cells, lithium-ion microbatteries, frequency multipliers, quantum dots, and integrated circuits, just to mention a few. With such advances, graphene technology is expected to significantly impact several areas of neurosurgery, including neuro-oncology, neurointensive care, neuroregeneration research, peripheral nerve surgery, functional neurosurgery, and spine surgery. In this topic review, the authors provide a basic introduction to the main electrophysical properties of graphene. Additionally, future perspectives of ongoing frontline investigations on this new metamaterial are discussed, with special emphasis on those research fields that are expected to most substantially impact experimental and clinical neurosurgery in the near future.

The Portable Chemical Sterilizer (PCS), D-FENS, and D-FEND ALL: novel chlorine dioxide decontamination technologies for the military.

PubMed

Doona, Christopher J; Feeherry, Florence E; Setlow, Peter; Malkin, Alexander J; Leighton, Terrence J

2014-06-29

There is a stated Army need for a field-portable, non-steam sterilizer technology that can be used by Forward Surgical Teams, Dental Companies, Veterinary Service Support Detachments, Combat Support Hospitals, and Area Medical Laboratories to sterilize surgical instruments and to sterilize pathological specimens prior to disposal in operating rooms, emergency treatment areas, and intensive care units. The following ensemble of novel, 'clean and green' chlorine dioxide technologies are versatile and flexible to adapt to meet a number of critical military needs for decontamination(6,15). Specifically, the Portable Chemical Sterilizer (PCS) was invented to meet urgent battlefield needs and close critical capability gaps for energy-independence, lightweight portability, rapid mobility, and rugged durability in high intensity forward deployments(3). As a revolutionary technological breakthrough in surgical sterilization technology, the PCS is a Modern Field Autoclave that relies on on-site, point-of-use, at-will generation of chlorine dioxide instead of steam. Two (2) PCS units sterilize 4 surgical trays in 1 hr, which is the equivalent throughput of one large steam autoclave (nicknamed "Bertha" in deployments because of its cumbersome size, bulky dimensions, and weight). However, the PCS operates using 100% less electricity (0 vs. 9 kW) and 98% less water (10 vs. 640 oz.), significantly reduces weight by 95% (20 vs. 450 lbs, a 4-man lift) and cube by 96% (2.1 vs. 60.2 ft(3)), and virtually eliminates the difficult challenges in forward deployments of repairs and maintaining reliable operation, lifting and transporting, and electrical power required for steam autoclaves.

Applied reproductive technologies and genetic resource banking for amphibian conservation.

PubMed

Kouba, Andrew J; Vance, Carrie K

2009-01-01

As amphibian populations continue to decline, both government and non-government organisations are establishing captive assurance colonies to secure populations deemed at risk of extinction if left in the wild. For the most part, little is known about the nutritional ecology, reproductive biology or husbandry needs of the animals placed into captive breeding programs. Because of this lack of knowledge, conservation biologists are currently facing the difficult task of maintaining and reproducing these species. Academic and zoo scientists are beginning to examine different technologies for maintaining the genetic diversity of founder populations brought out of the wild before the animals become extinct from rapidly spreading epizootic diseases. One such technology is genetic resource banking and applied reproductive technologies for species that are difficult to reproduce reliably in captivity. Significant advances have been made in the last decade for amphibian assisted reproduction including the use of exogenous hormones for induction of spermiation and ovulation, in vitro fertilisation, short-term cold storage of gametes and long-term cryopreservation of spermatozoa. These scientific breakthroughs for a select few species will no doubt serve as models for future assisted breeding protocols and the increasing number of amphibians requiring conservation intervention. However, the development of specialised assisted breeding protocols that can be applied to many different families of amphibians will likely require species-specific modifications considering their wide range of reproductive modes. The purpose of this review is to summarise the current state of knowledge in the area of assisted reproduction technologies and gene banking for the conservation of amphibians.

Leachate breakthrough mechanism and key pollutant indicator of municipal solid waste landfill barrier systems: Centrifuge and numerical modeling approach.

PubMed

Shu, Shi; Zhu, Wei; Wang, Shengwei; Ng, Charles Wang Wai; Chen, Yunmin; Chiu, Abraham Chung Fai

2018-01-15

Groundwater pollution by leachate leakage is one of the most common environmental hazards associated with municipal solid waste (MSW) landfill sites. However, landfill leachate contains a large variety of pollutants with widely different concentrations and biotoxicity. Thus, selecting leachate pollutant indicators and levels for identifying breakthrough of barrier systems are key factors in assessing their breakthrough times. This study investigated the transport behavior of leachate pollutants through landfill barrier systems using centrifuge tests and numerical modeling. The overall objective of this study is to investigate breakthrough mechanism to facilitate the establishment of a consistent pollutant threshold concentration for use as a groundwater pollution alert. The specific objective of the study is to identify which pollutant and breakthrough threshold concentration should be used as an indicator in the transport of multiple pollutants through a landfill barrier system. The threshold concentration from the Chinese groundwater quality standards was used in the analysis of the properties of leachates from many landfill sites in China. The time for the chemical oxygen demand (COD) to reach the breakthrough threshold concentration at the bottom of a 2m compacted clay liner was 1.51years according to centrifuge tests, and 1.81years according to numerical modeling. The COD breakthrough times for single and double composite liners were within the range of 16 and 36.58years. Of all the pollutants, COD was found to consistently reach the breakthrough threshold first. Therefore, COD can be selected as the key indicator for pollution alerts and used to assess the environmental risk posed by MSW landfill sites. Copyright © 2017. Published by Elsevier B.V.

Implications of Outside-the-Box Technologies on Future Space Exploration and Colonization

NASA Astrophysics Data System (ADS)

Loder, Theodore C.

2003-01-01

In general, planning for future manned space exploration either to the moon, Mars, or an asteroid has depended on a somewhat linear extrapolation of our present technologies. Two major prohibitive cost issues regarding such planning are payload lift and in-flight energy generation. The costs of these in both engineering and actual flight costs, coupled with the planning necessary to carry out such exploration have prevented us from actively moving forward. Although, it will be worthwhile to continue to plan for such exploration using ``present'' technologies, I recommend that planning be concerned mainly with mission strategies and goals utilizing both present technology and totally new energy breakthroughs. There are presently in research and development an entire suite of relevant outside-the-box technologies which will include both zero point energy generation and antigravity technologies that will replace our present solar/nuclear/fuel cell energy technologies and liquid/solid fuel rockets. This paper describes some of these technologies, the physics behind them and their potential use for manned space exploration. The companies and countries that first incorporate these technologies into their space programs will lead the way in exploring and colonizing space.

Assessing public forecasts to encourage accountability: The case of MIT’s Technology Review

PubMed Central

2017-01-01

Although high degrees of reliability have been found for many types of forecasts purportedly due to the existence of accountability, public forecasts of technology are rarely assessed and continue to have a poor reputation. This paper’s analysis of forecasts made by MIT’s Technology Review provides a rare assessment and thus a means to encourage accountability. It first shows that few of the predicted “breakthrough technologies” currently have large markets. Only four have sales greater than $10 billion while eight technologies not predicted by Technology Review have sales greater than $10 billion including three with greater than $100 billion and one other with greater than $50 billion. Second, possible reasons for these poor forecasts are then discussed including an over emphasis on the science-based process of technology change, sometimes called the linear model of innovation. Third, this paper describes a different model of technology change, one that is widely used by private companies and that explains the emergence of those technologies that have greater than $10 billion in sales. Fourth, technology change and forecasts are discussed in terms of cognitive biases and mental models. PMID:28797114

Breakthrough: X-ray Laser Captures Atoms and Molecules in Action

ScienceCinema

Bergmann, Uwe

2018-02-13

The Linac Coherent Light Source at SLAC is the world's most powerful X-ray laser. Just two years after turning on in 2009, breakthrough science is emerging from the LCLS at a rapid pace. A recent experiment used the X-rays to create and probe a 2-million-degree piece of matter in a controlled way for the first time-a significant leap toward understanding the extreme conditions found in the hearts of stars and giant planets, and a finding which could further guide research into nuclear fusion, the mechanism that powers the sun. Upcoming experiments will investigate the fundamental, atomic-scale processes behind such phenomena as superconductivity and magnetism, as well as peering into the molecular workings of photosynthesis in plants.

2016: Signaling Breakthroughs of the Year.

PubMed

Adler, Elizabeth M

2017-01-03

Signaling breakthroughs of 2016 clustered mainly in the areas of neuroscience, immunology, and metabolism, with excursions into plant hormone signaling and bacterial manipulation of host signaling pathways. Perhaps reflecting the growing maturity of the discipline of cell signaling, many of this year's breakthroughs have implications for the pathogenesis or treatment of human disease. Copyright © 2017, American Association for the Advancement of Science.

[Breakthrough cancer pain in the elderly].

PubMed

Cabezón-Gutiérrez, Luis; Viloria-Jiménez, María Aurora; Pérez-Cajaraville, Juan; Álamo-González, Cecilio; López-Trigo, José Antonio; Gil-Gregorio, Pedro

Breakthrough pain is defined as an acute exacerbation of pain with rapid onset, short duration and moderate or high intensity, which occurs spontaneously or in connection with a predictable or unpredictable event despite there being stabilised and controlled baseline pain. However, there are doubts about the definition, terminology, epidemiology, and assessment of breakthrough pain, with no clear answers or consensus, especially in the elderly population. This non-systematic review summarises the most important aspects of breakthrough pain in the elderly, based on the limited publications there are in that population group. Copyright © 2016 SEGG. Publicado por Elsevier España, S.L.U. All rights reserved.

Resistance pattern of breakthrough urinary tract infections in children on antibiotic prophylaxis.

PubMed

Nateghian, Ali Reza; Robinson, Joan L; Mohandessi, Shahab; Hooman, Nakysa

2009-01-01

Prophylactic antibiotics are commonly used for prevention of urinary tract infections (UTIs) in children. It was postulated that the organisms and resistance patterns of breakthrough infections would differ with the choice of antimicrobial prophylaxis. This was a retrospective descriptive study of all breakthroughs UTI from 2000 to 2006 in children over 1 month of age discharged from a referral children's hospital in Tehran, Iran on continuous antibiotic prophylaxis for UTIs. Fifty-seven children discharged on prophylaxis had breakthrough UTIs of which 32 (56%) had a previously diagnosed urinary tract anomaly. Escherichia coli was responsible for the majority of infections irrespective of choice of prophylaxis. Thirty-three of 56 breakthrough UTIs (59%) were with organisms that were resistant to the prophylactic antibiotic. There was an increased incidence of resistance to prophylaxis in children on cefixime (16 of 22; 78%) when compared with children on cephalexin (7 of 19; 37%; p=0.02) and a trend toward increased resistance when compared with children on trimethoprim-sulfamethoxasole (3 of 8; 37%) (p=0.10). In conclusion, the resistance pattern of organisms causing breakthrough UTIs varies with the choice of prophylaxis which should be taken into consideration in chosing empiric therapy for such infections.

Comprehensive approach to smart urban development based on Big Data application

NASA Astrophysics Data System (ADS)

Kurcheeva, G. I.; Klochkov, G. A.

2018-05-01

Despite a certain technological backwardness of the Russian economy, the authors believe that the transition to the «smart city» is possible if one can solve such problems: providing large-scale investment, training and retraining specialists in the field of ICT, increasing innovation managers and consumers, increasing ICT participation in the work of governments, organizations and people, creating the appropriate conditions for the development of the information society. Accordingly, when developing models, it is planned to consider the relationship between quality of life and the existing system of indicators on trends of «smart cities». Monitoring of indicators of quality of life, mutually related indicators of technological development can help us develop the process model. When selecting directions for the main components of the «smart city», let us introduce the evaluation criteria that significantly affect the quality of the values of life. The development of «smart cities» should consider the international experience of the use of breakthrough innovative technology. Research scientists of various countries show a variety of approaches to identifying the main business processes in models of the «smart city». Having the international experience, it is necessary to improve business processes in the construction of a process model «smart city», adapting the model to the characteristics of the national environment.

Design of a walking robot

NASA Technical Reports Server (NTRS)

Whittaker, William; Dowling, Kevin

1994-01-01

Carnegie Mellon University's Autonomous Planetary Exploration Program (APEX) is currently building the Daedalus robot; a system capable of performing extended autonomous planetary exploration missions. Extended autonomy is an important capability because the continued exploration of the Moon, Mars and other solid bodies within the solar system will probably be carried out by autonomous robotic systems. There are a number of reasons for this - the most important of which are the high cost of placing a man in space, the high risk associated with human exploration and communication delays that make teleoperation infeasible. The Daedalus robot represents an evolutionary approach to robot mechanism design and software system architecture. Daedalus incorporates key features from a number of predecessor systems. Using previously proven technologies, the Apex project endeavors to encompass all of the capabilities necessary for robust planetary exploration. The Ambler, a six-legged walking machine was developed by CMU for demonstration of technologies required for planetary exploration. In its five years of life, the Ambler project brought major breakthroughs in various areas of robotic technology. Significant progress was made in: mechanism and control, by introducing a novel gait pattern (circulating gait) and use of orthogonal legs; perception, by developing sophisticated algorithms for map building; and planning, by developing and implementing the Task Control Architecture to coordinate tasks and control complex system functions. The APEX project is the successor of the Ambler project.

Design of a walking robot

NASA Astrophysics Data System (ADS)

Whittaker, William; Dowling, Kevin

1994-03-01

Carnegie Mellon University's Autonomous Planetary Exploration Program (APEX) is currently building the Daedalus robot; a system capable of performing extended autonomous planetary exploration missions. Extended autonomy is an important capability because the continued exploration of the Moon, Mars and other solid bodies within the solar system will probably be carried out by autonomous robotic systems. There are a number of reasons for this - the most important of which are the high cost of placing a man in space, the high risk associated with human exploration and communication delays that make teleoperation infeasible. The Daedalus robot represents an evolutionary approach to robot mechanism design and software system architecture. Daedalus incorporates key features from a number of predecessor systems. Using previously proven technologies, the Apex project endeavors to encompass all of the capabilities necessary for robust planetary exploration. The Ambler, a six-legged walking machine was developed by CMU for demonstration of technologies required for planetary exploration. In its five years of life, the Ambler project brought major breakthroughs in various areas of robotic technology. Significant progress was made in: mechanism and control, by introducing a novel gait pattern (circulating gait) and use of orthogonal legs; perception, by developing sophisticated algorithms for map building; and planning, by developing and implementing the Task Control Architecture to coordinate tasks and control complex system functions. The APEX project is the successor of the Ambler project.

Los Alamos Shows Airport Security Technology at Work

DOE Office of Scientific and Technical Information (OSTI.GOV)

Espy, Michelle; Schultz, Larry; Hunter, James

Los Alamos scientists have advanced a Magnetic Resonance Imaging (MRI) technology that may provide a breakthrough for screening liquids at airport security. They've added low-power X-ray data to the mix, and as a result have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new system is named MagRay. The goal is to quickly and accurately distinguish between liquids that visually appear identical. For example, what appears to be a bottle of white wine could potentially be nitromethane, a liquid that could be used to make an explosive. Both aremore » clear liquids, one would be perfectly safe on a commercial aircraft, the other would be strictly prohibited. How to tell them apart quickly without error at an airport security area is the focus of Michelle Espy, Larry Schultz and their team. In this video, Espy and the MagRay team explain how the new technology works, how they've developed an easy operator interface, and what the next steps might be in transitioning this technology to the private sector.« less

Los Alamos Shows Airport Security Technology at Work

ScienceCinema

Espy, Michelle; Schultz, Larry; Hunter, James

2018-05-30

Los Alamos scientists have advanced a Magnetic Resonance Imaging (MRI) technology that may provide a breakthrough for screening liquids at airport security. They've added low-power X-ray data to the mix, and as a result have unlocked a new detection technology. Funded in part by the Department of Homeland Security's Science and Technology Directorate, the new system is named MagRay. The goal is to quickly and accurately distinguish between liquids that visually appear identical. For example, what appears to be a bottle of white wine could potentially be nitromethane, a liquid that could be used to make an explosive. Both are clear liquids, one would be perfectly safe on a commercial aircraft, the other would be strictly prohibited. How to tell them apart quickly without error at an airport security area is the focus of Michelle Espy, Larry Schultz and their team. In this video, Espy and the MagRay team explain how the new technology works, how they've developed an easy operator interface, and what the next steps might be in transitioning this technology to the private sector.

Assessing Potential Propulsion Breakthroughs

NASA Technical Reports Server (NTRS)

Millis, Marc G.

2005-01-01

The term, propulsion breakthrough, refers to concepts like propellantless space drives and faster-than-light travel, the kind of breakthroughs that would make interstellar exploration practical. Although no such breakthroughs appear imminent, a variety of investigations into these goals have begun. From 1996 to 2002, NASA supported the Breakthrough Propulsion Physics Project to examine physics in the context of breakthrough spaceflight. Three facets of these assessments are now reported: (1) predicting benefits, (2) selecting research, and (3) recent technical progress. Predicting benefits is challenging since the breakthroughs are still only notional concepts, but kinetic energy can serve as a basis for comparison. In terms of kinetic energy, a hypothetical space drive could require many orders of magnitude less energy than a rocket for journeys to our nearest neighboring star. Assessing research options is challenging when the goals are beyond known physics and when the implications of success are profound. To mitigate the challenges, a selection process is described where: (a) research tasks are constrained to only address the immediate unknowns, curious effects or critical issues, (b) reliability of assertions is more important than their implications, and (c) reviewers judge credibility rather than feasibility. The recent findings of a number of tasks, some selected using this process, are discussed. Of the 14 tasks included, six reached null conclusions, four remain unresolved, and four have opportunities for sequels. A dominant theme with the sequels is research about the properties of space, inertial frames, and the quantum vacuum.

Applied Augmented Reality for High Precision Maintenance

NASA Astrophysics Data System (ADS)

Dever, Clark

Augmented Reality had a major consumer breakthrough this year with Pokemon Go. The underlying technologies that made that app a success with gamers can be applied to improve the efficiency and efficacy of workers. This session will explore some of the use cases for augmented reality in an industrial environment. In doing so, the environmental impacts and human factors that must be considered will be explored. Additionally, the sensors, algorithms, and visualization techniques used to realize augmented reality will be discussed. The benefits of augmented reality solutions in industrial environments include automated data recording, improved quality assurance, reduction in training costs and improved mean-time-to-resolution. As technology continues to follow Moore's law, more applications will become feasible as performance-per-dollar increases across all system components.

Silver nanoparticle ink technology: state of the art

PubMed Central

Rajan, Krishna; Roppolo, Ignazio; Chiappone, Annalisa; Bocchini, Sergio; Perrone, Denis; Chiolerio, Alessandro

2016-01-01

Printed electronics will bring to the consumer level great breakthroughs and unique products in the near future, shifting the usual paradigm of electronic devices and circuit boards from hard boxes and rigid sheets into flexible thin layers and bringing disposable electronics, smart tags, and so on. The most promising tool to achieve the target depends upon the availability of nanotechnology-based functional inks. A certain delay in the innovation-transfer process to the market is now being observed. Nevertheless, the most widely diffused product, settled technology, and the highest sales volumes are related to the silver nanoparticle-based ink market, representing the best example of commercial nanotechnology today. This is a compact review on synthesis routes, main properties, and practical applications. PMID:26811673

Results of innovative communication processes on productivity gains in a high technology environment

NASA Technical Reports Server (NTRS)

Kelly, B. J.

1985-01-01

The technology which resulted in performance breakthroughs at engineering and management services is discussed. As a result of the innovative approaches of communicating productivity concepts to the employees, specific outcomes can now be pinpointed at all levels of the organization such as: (1) employee-headed program; (2) performance feedback processes; and (3) an investigative approach to creating leadership. The Lockheed Corporation began the innovative trend in 1974 when they became the first company to introduce quality circles in America. Although some of Lockheed-EMSCO's processes may sound different from traditional improvement processes, the context out of which those to be presented evolved has sustained more than 10 years of positive results through employee involvement activities.

Silver nanoparticle ink technology: state of the art.

PubMed

Rajan, Krishna; Roppolo, Ignazio; Chiappone, Annalisa; Bocchini, Sergio; Perrone, Denis; Chiolerio, Alessandro

2016-01-01

Printed electronics will bring to the consumer level great breakthroughs and unique products in the near future, shifting the usual paradigm of electronic devices and circuit boards from hard boxes and rigid sheets into flexible thin layers and bringing disposable electronics, smart tags, and so on. The most promising tool to achieve the target depends upon the availability of nanotechnology-based functional inks. A certain delay in the innovation-transfer process to the market is now being observed. Nevertheless, the most widely diffused product, settled technology, and the highest sales volumes are related to the silver nanoparticle-based ink market, representing the best example of commercial nanotechnology today. This is a compact review on synthesis routes, main properties, and practical applications.

An ocean bottom seismic observatory with near real-time telemetry

NASA Astrophysics Data System (ADS)

Berger, J.; Laske, G.; Babcock, J.; Orcutt, J.

2016-02-01

We describe a new technology that can provide near real-time telemetry of sensor data from the ocean bottom without a moored buoy or a cable to shore. The breakthrough technology that makes this system possible is an autonomous surface vehicle called a Wave Glider developed by Liquid Robotics, Inc. of Sunnyvale, CA, which harvests wave and solar energy for motive and electrical power. We present results from several deployments of a prototype system that demonstrate the feasibility of this concept. We also demonstrated that a wave glider could tow a suitably designed ocean bottom package with acceptable loss of speed. With further development such a system could be deployed autonomously and provide real-time telemetry of data from seafloor sensors.

Recent developments in large-scale ozone generation with dielectric barrier discharges

NASA Astrophysics Data System (ADS)

Lopez, Jose L.

2014-10-01

Large-scale ozone generation for industrial applications has been entirely based on the creation of microplasmas or microdischarges created using dielectric barrier discharge (DBD) reactors. Although versions of DBD generated ozone have been in continuous use for over a hundred years especially in water treatment, recent changes in environmental awareness and sustainability have lead to a surge of ozone generating facilities throughout the world. As a result of this enhanced global usage of this environmental cleaning application various new discoveries have emerged in the science and technology of ozone generation. This presentation will describe some of the most recent breakthrough developments in large-scale ozone generation while further addressing some of the current scientific and engineering challenges of this technology.

Adsorption equilibrium and dynamics of gasoline vapors onto polymeric adsorbents.

PubMed

Jia, Lijuan; Yu, Weihua; Long, Chao; Li, Aimin

2014-03-01

The emission of gasoline vapors is becoming a significant environmental problem especially for the population-dense area and also results in a significant economic loss. In this study, adsorption equilibrium and dynamics of gasoline vapors onto macroporous and hypercrosslinked polymeric resins at 308 K were investigated and compared with commercial activated carbon (NucharWV-A 1100). The results showed that the equilibrium and breakthrough adsorption capacities of virgin macroporous and hypercrosslinked polymeric resins were lower than virgin-activated carbon. Compared with origin adsorbents, however, the breakthrough adsorption capacities of the regenerated activated carbon for gasoline vapors decreased by 58.5 % and 61.3 % when the initial concentration of gasoline vapors were 700 and 1,400 mg/L, while those of macroporous and hypercrosslinked resins decreased by 17.4 % and 17.5 %, and 46.5 % and 45.5 %, respectively. Due to the specific bimodal property in the region of micropore (0.5-2.0 nm) and meso-macropore (30-70 nm), the regenerated hypercrosslinked polymeric resin exhibited the comparable breakthrough adsorption capacities with the regenerated activated carbon at the initial concentration of 700 mg/L, and even higher when the initial concentration of gasoline vapors was 1,400 mg/L. In addition, 90 % of relative humidity had ignorable effect on the adsorption of gasoline vapors on hypercrosslinked polymeric resin. Taken together, it is expected that hypercrosslinked polymeric adsorbent would be a promising adsorbent for the removal of gasoline vapors from gas streams.

Everything I Need to Know About Science Communication, I Learned from Local Television News (Invited)

NASA Astrophysics Data System (ADS)

Lorditch, E.; O'Riordan, C.

2010-12-01

According to the National Science Foundation’s Science and Engineering Indicators for 2010, the general public in the USA relies on local television news more than any other medium for their science and technology news and information -- with the internet coming in as a fast-rising second. Ten years ago, the American Institute of Physics (AIP) created Discoveries and Breakthroughs Inside Science (DBIS) as a way to reach this large audience and provide them with accurate and reliable science information. DBIS is a syndicated science news service that distributes twelve 90-second news segments to local television stations throughout the USA and internationally each month. DBIS topics cover a range of science, technology, engineering, and mathematics (STEM) topics including everything from astronomy to zoology. DBIS has created a unique pathway for science communication. Story ideas go through a rigorous process of background research and peer review to make sure that they meet not only our science criteria, but also our television criteria standards to make sure that television stations will air the segments. The program is supported by a STEM coalition of over 20 organizations- including AGU - that work together to identify research breakthroughs in diverse fields of science. We will describe the creation of this service and the fine-tuning of the editorial process. We will also highlight results from a 2003-2007 NSF grant to study the impact DBIS has on viewing audiences. The study showed us that 78% of television viewers would like to see more STEM news segments during their local news broadcast. Another important finding from the study is that there is a statistically significant difference in television viewers support for STEM in cities where DBIS segments are broadcasted compared to cities where they are not showing that DBIS is having an impact in communicating science to the general public. Finally, we will summarize what we have learned about making STEM news entertaining and informative as well as the balance between reporting the details of STEM news and making it relevant to the public.

Choreographing Partnerships within an Organizational Structure of Accountability: Maryland State Department of Education's Shift from Compliance Monitor to Breakthrough Partner

ERIC Educational Resources Information Center

Strickling, Laura Rutter; Doneker, Karen Lee

2014-01-01

Drawing upon data from twenty-five interviews, this paper examines how the Maryland State Department of Education's Cross-functional Team navigates its changing role from compliance monitor to breakthrough partner in terms of discourse, time, and flexibility, as it carries out the work of the Breakthrough Center. It also examines how the role of…

Technology advancement: a factor in increasing resource use

USGS Publications Warehouse

Wilburn, David R.; Goonan, Thomas G.; Bleiwas, Donald I.

2001-01-01

The specter of mineral resource scarcity has been repeatedly raised as a concern because ever-growing populations with seemingly insatiable appetites for minerals place claims against a finite resource endowment. This report analyzes how technology has helped to ease resource constraints, and uses case studies of aluminum, copper, potash, and sulfur minerals to identify the effects of technology on resource supply. In spite of heightened demand for and increased loss of resources to environmental policy and urbanization, mineral producers historically have been able to continually expand production and lower costs. Specific production increases for the years 1900-98 were: aluminum (3,250 percent), copper (2,465 percent), potash (3,770 percent), and sulfur (6,000 percent). For the same period, constant-dollar (1998) prices decreased: aluminum (90 percent), copper (75 percent), potash (94 percent), and sulfur (89 percent). The application of technology has made available mineral deposits that were previously overlooked or considered non-viable. Using technology, producers can meet the demand for stronger, energy-efficient, more environmentally safe products with less physical material. Technologies have been developed to increase the amount of materials recycled and remanufactured. Technology development can occur in breakthroughs, but most often advances incrementally. Technological development is driven by the profit motive.

Computer model predicting breakthrough febrile urinary tract infection in children with primary vesicoureteral reflux.

PubMed

Arlen, Angela M; Alexander, Siobhan E; Wald, Moshe; Cooper, Christopher S

2016-10-01

Factors influencing the decision to surgically correct vesicoureteral reflux (VUR) include risk of breakthrough febrile urinary tract infection (fUTI) or renal scarring, and decreased likelihood of spontaneous resolution. Improved identification of children at risk for recurrent fUTI may impact management decisions, and allow for more individualized VUR management. We have developed and investigated the accuracy of a multivariable computational model to predict probability of breakthrough fUTI in children with primary VUR. Children with primary VUR and detailed clinical and voiding cystourethrogram (VCUG) data were identified. Patient demographics, VCUG findings including grade, laterality, and bladder volume at onset of VUR, UTI history, presence of bladder-bowel dysfunction (BBD), and breakthrough fUTI were assessed. The VCUG dataset was randomized into a training set of 288 with a separate representational cross-validation set of 96. Various model types and architectures were investigated using neUROn++, a set of C++ programs. Two hundred fifty-five children (208 girls, 47 boys) diagnosed with primary VUR at a mean age of 3.1 years (±2.6) met all inclusion criteria. A total 384 VCUGs were analyzed. Median follow-up was 24 months (interquartile range 12-52 months). Sixty-eight children (26.7%) experienced 90 breakthrough fUTI events. Dilating VUR, reflux occurring at low bladder volumes, BBD, and history of multiple infections/fUTI were associated with breakthrough fUTI (Table). A 2-hidden node neural network model had the best fit with a receiver operating characteristic curve area of 0.755 for predicting breakthrough fUTI. The risk of recurrent febrile infections, renal parenchymal scarring, and likelihood of spontaneous resolution, as well as parental preference all influence management of primary VUR. The genesis of UTI is multifactorial, making precise prediction of an individual child's risk of breakthrough fUTI challenging. Demonstrated risk factors for UTI include age, gender, VUR grade, reflux at low bladder volume, BBD, and UTI history. We developed a prognostic calculator using a multivariable model with 76% accuracy that can be deployed for availability on the Internet, allowing input variables to be entered to calculate the odds of an individual child developing a breakthrough fUTI. A computational model using multiple variables including bladder volume at onset of VUR provides individualized prediction of children at risk for breakthrough fUTI. A web-based prognostic calculator based on this model will provide a useful tool for assessing personalized risk of breakthrough fUTI in children with primary VUR. Copyright © 2016 Journal of Pediatric Urology Company. Published by Elsevier Ltd. All rights reserved.

Environment construction and bottleneck breakthrough in the improvement of wisdom exhibition

NASA Astrophysics Data System (ADS)

Zhang, Jiankang

2017-08-01

Wisdom exhibition is an inexorable trend in convention and exhibition industry in China. Information technology must be utilized by exhibition industry to achieve intelligent application and wisdom management, breaking the limitation of time as well as space, which raise the quality of exhibition service and level of operation to a totally new standard. Accordingly, exhibition industry should optimize mobile internet, a fundamental technology platform, during the advancing process of wisdom exhibition and consummate the combination among three plates including wisdom connection of information, wisdom exhibition environment and wisdom application of technology. Besides, the industry should realize the wisdom of external environment including wisdom of exhibition city, exhibition place, exhibition resource deal etc and break through bottle-neck in construction of wisdom exhibition industry, which includes construction of big data center, development of Mobile Internet application platform, promotion of information construction, innovative design of application scenarios.

Gravity Probe B: Testing Einstein with Gyroscopes

NASA Technical Reports Server (NTRS)

Geveden, Rex D.; May, Todd

2003-01-01

Some 40 years in the making, NASA' s historic Gravity Probe B (GP-B) mission is scheduled to launch aboard a Delta II in 2003. GP-B will test two extraordinary predictions from Einstein's General Relativity: geodetic precession and the Lense-Thirring effect (frame-dragging). Employing tiny, ultra-precise gyroscopes, GP-B features a measurement accuracy of 0.5 milli-arc-seconds per year. The extraordinary measurement precision is made possible by a host of breakthrough technologies, including electro-statically suspended, super-conducting quartz gyroscopes; virtual elimination of magnetic flux; a solid quartz star tracking telescope; helium microthrusters for drag-free control of the spacecraft; and a 2400 liter superfluid helium dewar. This paper will provide an overview of the science, key technologies, flight hardware, integration and test, and flight operations of the GP-B space vehicle. It will also examine some of the technical management challenges of a large-scale, technology-driven, Principal Investigator-led mission.

Gravity Probe B: Testing Einstein with Gyroscopes

NASA Technical Reports Server (NTRS)

Geveden, Rex D.; May, Todd

2003-01-01

Some 40 years in the making, NASA s historic Gravity Probe B (GP-B) mission is scheduled to launch aboard a Delta I1 in 2003. GP-B will test two extraordinary predictions from Einstein s General Relativity: geodetic precession and the Lense-Thirring effect (frame-dragging). Employing tiny, ultra-precise gyroscopes, GP-B features a measurement accuracy of 0.5 milli-arc-seconds per year. The extraordinary measurement precision is made possible by a host of breakthrough technologies, including electro-statically suspended, super-conducting quartz gyroscopes; virtual elimination of magnetic flux; a solid quartz star- tracking telescope; helium microthrusters for drag-free control of the spacecraft; and a 2400 liter superfluid helium dewar. This paper will provide an overview of the science, key technologies, flight hardware, integration and test, and flight operations of the GP-B space vehicle. It will also examine some of the technical management challenges of a large-scale, technology-driven, Principal Investigator-led mission.

Therapeutic robotics for children with disabilities: a case study.

PubMed

Drane, James; Safos, Charlotte; Lathan, Corinna E

2009-01-01

The advancement of technology is having a profound effect on enhancing the lives of children with disabilities. As advances in biomedical technology allow research breakthroughs to continue at a steady pace, more and more is being discovered about the nature of different disorders in children. At the same time, partly due to the continuing rapid rate of advancement (and societal acceptance) of robotics technology, researchers, educators, and therapists are exploring the idea that robots might be used as an effective therapeutic and educational tool. Over the past nine years, AnthroTronix has collaborated extensively with therapists, educators, researchers, parents, and children to uncover the therapeutic and educational benefits of including robotics as part of rehabilitation curriculum for children. As a central part of this effort, the company has worked with its colleagues to develop and refine the CosmoBot system, an interactive robotic toolkit designed to enhance therapy, education, and play for children with disabilities.

Pave the way Towards Better Human Societies

NASA Astrophysics Data System (ADS)

Perc, Matjaž

In our societies, we invest a lot of resources to ensure technological progress, and to find out secrets about the deepest corners of our universe. As a result, we are experiencing technological breakthroughs at an unprecedented rate, and we invest billions into research that is as far away from everyday life as the east is from the west. While technology has the potential to improve the quality of life and the satisfaction of curiosity is rewarding, we must not fail to notice that, at the same time, many of our societies are falling apart. Inequality all over the world has become staggering, and we are seriously failing to meet the most basic needs of the majority of people that live on this planet. We have neglected adverse societal changes for far too long, and we have done very little in terms of research to understand, and more importantly, to reverse, or at least to impede, these very worrying trends...

Cornerstones of CRISPR-Cas in drug development and therapy

PubMed Central

Fellmann, Christof; Gowen, Benjamin G.; Lin, Pei-Chun; Doudna, Jennifer A.; Corn, Jacob E.

2017-01-01

The recent development of CRISPR-Cas systems as easily accessible and programmable tools for genome editing and regulation is spurring a revolution in biology. Paired with the rapid expansion of personalized and reference genomic sequence information, technologies based on CRISPR-Cas are enabling nearly unlimited genetic manipulation even in previously difficult contexts, including human cells. Although much attention has focused on the potential of CRISPR-Cas to cure Mendelian diseases, the technology also holds promise to transform the development of therapies to treat complex heritable and somatic disorders. Here we discuss how CRISPR-Cas can impact the next generation of drugs through accelerating the identification and validation of high-value targets, uncovering high confidence biomarkers and developing differentiated breakthrough therapies. We focus on the promises, pitfalls and hurdles of this revolutionary gene editing technology, and also discuss key aspects of different CRISPR-Cas screening platforms and offer our perspectives on the best practices in genome engineering. PMID:28008168

NASA's Morphing Project Research Summaries in Fiscal Year 2002

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria R.; Waszak, Martin R.

2005-01-01

The Morphing Project at the National Aeronautics and Space Agency s (NASA) Langley Research Center (LaRC) is part of the Breakthrough Vehicle Technologies Project, Vehicle Systems Program that conducts fundamental research on advanced technologies for future flight vehicles. The objectives of the Morphing Project are to develop and assess the advanced technologies and integrated component concepts to enable efficient, multi-point adaptability of flight vehicles; primarily through the application of adaptive structures and adaptive flow control to substantially alter vehicle performance characteristics. This document is a compilation of research summaries and other information on the project for fiscal year 2002. The focus is to provide a brief overview of the project content, technical results and lessons learned. At the time of publication, the Vehicle Systems Program (which includes the Morphing Project) is undergoing a program re-planning and reorganization. Accordingly, the programmatic descriptions of this document pertain only to the program as of fiscal year 2002.

NASA Breakthrough Propulsion Physics Workshop Proceedings

NASA Technical Reports Server (NTRS)

Millis, Marc G. (Editor); Williamson, Gary Scott (Editor)

1999-01-01

In August 1997, NASA sponsored a 3-day workshop to assess the prospects emerging from physics that may eventually lead to creating propulsion breakthroughs -the kind of breakthroughs that could revolutionize space flight and enable human voyages to other star systems. Experiments and theories were discussed regarding the coupling of gravity and electromagnetism, vacuum fluctuation energy, warp drives and wormholes, and superluminal quantum tunneling. Because the propulsion goals are presumably far from fruition, a special emphasis was to identify affordable, near-term, and credible research tasks that could make measurable progress toward these grand ambitions. This workshop was one of the first steps for the new NASA Breakthrough Propulsion Physics program led by the NASA Lewis Research Center.

Drive Fan of the NACA's Icing Research Tunnel

NASA Image and Video Library

1956-10-21

A researcher examines the drive fan inside the Icing Research Tunnel at the National Advisory Committee for Aeronautics (NACA) Flight Propulsion Research Laboratory in Cleveland, Ohio. The facility was built in the mid-1940s to simulate the atmospheric conditions that caused ice to build up on aircraft. Carrier Corporation refrigeration equipment reduced the internal air temperature to -45⁰ F, and a spray bar system injected water droplets into the air stream. The 24-foot diameter drive fan, seen in this photograph, created air flow velocities up to 400 miles per hour. The 1950s were prime years for the Icing Research Tunnel. NACA engineers had spent the 1940s trying to resolve the complexities of the spray bar system. The final system put into operation in 1950 included six horizontal spray bars with 80 nozzles that produced a 4- by 4-foot cloud in the test section. The icing tunnel was used for extensive testing of civilian and military aircraft components in the 1950s. The NACA also launched a major investigation of the various methods of heating leading edge surfaces. The hot-air anti-icing technology used on today’s commercial transports was largely developed in the facility during this period. Lewis researchers also made significant breakthroughs with icing on radomes and jet engines. Although the Icing Research Tunnel yielded major breakthroughs in the 1950s, the Lewis icing research program began tapering off as interest in the space program grew. The icing tunnel’s use declined in 1956 and 1957. The launch of Sputnik in October 1957 signaled the end of the facility’s operation. The icing staff was transferred to other research projects and the icing tunnel was temporarily mothballed.

Single Spatial-Mode Room-Temperature-Operated 3.0 to 3.4 micrometer Diode Lasers

NASA Technical Reports Server (NTRS)

Frez, Clifford F.; Soibel, Alexander; Belenky, Gregory; Shterengas, Leon; Kipshidze, Gela

2010-01-01

Compact, highly efficient, 3.0 to 3.4 m light emitters are in demand for spectroscopic analysis and identification of chemical substances (including methane and formaldehyde), infrared countermeasures technologies, and development of advanced infrared scene projectors. The need for these light emitters can be currently addressed either by bulky solid-state light emitters with limited power conversion efficiency, or cooled Interband Cascade (IC) semiconductor lasers. Researchers here have developed a breakthrough approach to fabrication of diode mid-IR lasers that have several advantages over IC lasers used for the Mars 2009 mission. This breakthrough is due to a novel design utilizing the strain-engineered quantum-well (QW) active region and quinternary barriers, and due to optimization of device material composition and growth conditions (growth temperatures and rates). However, in their present form, these GaSb-based laser diodes cannot be directly used as a part of sensor systems. The device spectrum is too broad to perform spectroscopic analysis of gas species, and operating currents and voltages are too high. In the current work, the emitters were fabricated as narrow-ridge waveguide index-guided lasers rather than broad stripe-gain guided multimode Fabry-Perot (FP) lasers as was done previously. These narrow-ridge waveguide mid-IR lasers exhibit much lower power consumptions, and can operate in a single spatial mode that is necessary for demonstration of single-mode distributed feedback (DBF) devices for spectroscopic applications. These lasers will enable a new generation of compact, tunable diode laser spectrometers with lower power consumption, reduced complexity, and significantly reduced development costs. These lasers can be used for the detection of HCN, C2H2, methane, and ethane.

New Developments in CRISPR Technology: Improvements in Specificity and Efficiency.

PubMed

Safari, Fatemeh; Farajnia, Safar; Ghasemi, Younes; Zarghami, Nosratollah

2017-01-01

RNA-guided endonuclease as a versatile genome editing technology opened new windows in various fields of biology. The simplicity of this revolutionary technique provides a promising future for its application in a broad range of approaches from functional annotation of genes to diseases, to genetic manipulation and gene therapy. Besides the site-specific activity of Cas9 endonuclease, the unintended cleavage known as off-target effect is still a major challenge for this genome editing technique. Various strategies have been developed to resolve this bottleneck including development of new softwares for designing optimized guide RNA (gRNA), engineering Cas9 enzyme, improvement in off-target detection assays, etc. Results: This review dedicated to discuss on methods that have been used for optimizing Cas9, specificity with the aim of improving this technology for therapeutic applications. In addition, the applications and novel breakthroughs in the field of CRISPR technology will be described. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Trapped between two tails: trading off scientific uncertainties via climate targets

NASA Astrophysics Data System (ADS)

Lemoine, Derek; McJeon, Haewon C.

2013-09-01

Climate change policies must trade off uncertainties about future warming, about the social and ecological impacts of warming, and about the cost of reducing greenhouse gas emissions. We show that laxer carbon targets produce broader distributions for climate damages, skewed towards severe outcomes. However, if potential low-carbon technologies fill overlapping niches, then more stringent carbon targets produce broader distributions for the cost of reducing emissions, skewed towards high-cost outcomes. We use the technology-rich GCAM integrated assessment model to assess the robustness of 450 and 500 ppm carbon targets to each uncertain factor. The 500 ppm target provides net benefits across a broad range of futures. The 450 ppm target provides net benefits only when impacts are greater than conventionally assumed, when multiple technological breakthroughs lower the cost of abatement, or when evaluated with a low discount rate. Policy evaluations are more sensitive to uncertainty about abatement technology and impacts than to uncertainty about warming.

Application of high performance asynchronous socket communication in power distribution automation

NASA Astrophysics Data System (ADS)

Wang, Ziyu

2017-05-01

With the development of information technology and Internet technology, and the growing demand for electricity, the stability and the reliable operation of power system have been the goal of power grid workers. With the advent of the era of big data, the power data will gradually become an important breakthrough to guarantee the safe and reliable operation of the power grid. So, in the electric power industry, how to efficiently and robustly receive the data transmitted by the data acquisition device, make the power distribution automation system be able to execute scientific decision quickly, which is the pursuit direction in power grid. In this paper, some existing problems in the power system communication are analysed, and with the help of the network technology, a set of solutions called Asynchronous Socket Technology to the problem in network communication which meets the high concurrency and the high throughput is proposed. Besides, the paper also looks forward to the development direction of power distribution automation in the era of big data and artificial intelligence.

Illinois Accelerator Research Center

DOE PAGES

Kroc, Thomas K.; Cooper, Charlie A.

2017-10-26

The Illinois Accelerator Research Center (IARC) hosts a new accelerator development program at Fermi National Accelerator Laboratory. IARC provides access to Fermi's state-of-the-art facilities and technologies for research, development and industrialization of particle accelerator technology. In addition to facilitating access to available existing Fermi infrastructure, the IARC Campus has a dedicated 36,000 ft2 heavy assembly building (HAB) with all the infrastructure needed to develop, commission and operate new accelerators. Connected to the HAB is a 47,000 ft Office, Technology and Engineering (OTE) building, paid for by the state, that has office, meeting, and light technical space. The OTE building, whichmore » contains the Accelerator Physics Center, and nearby Accelerator and Technical divisions provide IARC collaborators with unique access to world class expertise in a wide array of accelerator technologies. Finally, at IARC scientists and engineers from Fermilab and academia work side by side with industrial partners to develop breakthroughs in accelerator science and translate them into applications for the nation's health, wealth and security.« less

Horizon Mission Methodology - A tool for the study of technology innovation and new paradigms

NASA Technical Reports Server (NTRS)

Anderson, John L.

1993-01-01

The Horizon Mission (HM) methodology was developed to provide a means of identifying and evaluating highly innovative, breakthrough technology concepts (BTCs) and for assessing their potential impact on advanced space missions. The methodology is based on identifying new capabilities needed by hypothetical 'horizon' space missions having performance requirements that cannot be met even by extrapolating known space technologies. Normal human evaluation of new ideas such as BTCs appears to be governed (and limited) by 'inner models of reality' defined as paradigms. Thus, new ideas are evaluated by old models. This paper describes the use of the HM Methodology to define possible future paradigms that would provide alternatives to evaluation by current paradigms. The approach is to represent a future paradigm by a set of new BTC-based capabilities - called a paradigm abstract. The paper describes methods of constructing and using the abstracts for evaluating BTCs for space applications and for exploring the concept of paradigms and paradigm shifts as a representation of technology innovation.

Trapped Between Two Tails: Trading Off Scientific Uncertainties via Climate Targets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lemoine, Derek M.; McJeon, Haewon C.

2013-08-20

Climate change policies must trade off uncertainties about future warming, about the social and ecological impacts of warming, and about the cost of reducing greenhouse gas emissions. We show that laxer carbon targets produce broader distributions for climate damages, skewed towards severe outcomes. However, if potential low-carbon technologies fill overlapping niches, then more stringent carbon targets produce broader distributions for the cost of reducing emissions, skewed towards high-cost outcomes. We use the technology- rich GCAM integrated assessment model to assess the robustness of 450 ppm and 500 ppm carbon targets to each uncertain factor. The 500 ppm target provides netmore » benefits across a broad range of futures. The 450 ppm target provides net benefits only when impacts are greater than conventionally assumed, when multiple technological breakthroughs lower the cost of abatement, or when evaluated with a low discount rate. Policy evaluations are more sensitive to uncertainty about abatement technology and impacts than to uncertainty about warming.« less

Illinois Accelerator Research Center

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kroc, Thomas K.; Cooper, Charlie A.

The Illinois Accelerator Research Center (IARC) hosts a new accelerator development program at Fermi National Accelerator Laboratory. IARC provides access to Fermi's state-of-the-art facilities and technologies for research, development and industrialization of particle accelerator technology. In addition to facilitating access to available existing Fermi infrastructure, the IARC Campus has a dedicated 36,000 ft2 heavy assembly building (HAB) with all the infrastructure needed to develop, commission and operate new accelerators. Connected to the HAB is a 47,000 ft Office, Technology and Engineering (OTE) building, paid for by the state, that has office, meeting, and light technical space. The OTE building, whichmore » contains the Accelerator Physics Center, and nearby Accelerator and Technical divisions provide IARC collaborators with unique access to world class expertise in a wide array of accelerator technologies. Finally, at IARC scientists and engineers from Fermilab and academia work side by side with industrial partners to develop breakthroughs in accelerator science and translate them into applications for the nation's health, wealth and security.« less

TABLET: The personal computer of the year 2000

NASA Technical Reports Server (NTRS)

Mel, Bartlett W.; Omohundro, Stephen M.; Robison, Arch D.; Skiena, Steven S.; Thearling, Kurt H.; Young, Luke T.; Wolfram, Stephen

1988-01-01

The University of Illinois design of the TABLET portable computer extends the freedom of pen and notepad with a machine that draws on the projected power of 21st century technology. Without assuming any new, major technological breakthroughs, it seeks to balance the promises of today's growing technologies with the changing role of computers in tomorrow's education, research, security, and commerce. It seeks to gather together in one basket the matured fruits of such buzzword technologies as LCD, GPS, CCD, WSI, and DSP. The design is simple, yet sleek. Roughly the size and weight of a notebook, the machine is a dark, featureless monolith with no moving parts. Through magneto-optics, a simple LaserCard provides exchangeable, mass data storage. Its I/O surface, in concert with built-in infrared and cellular transceivers, puts the user in touch with anyone and anything. The ensemble of these components, directed by software that can transform it into anything from a keyboard or notepad to an office or video studio, suggests an instrument of tremendous power and freedom.

Illinois Accelerator Research Center

NASA Astrophysics Data System (ADS)

Kroc, Thomas K.; Cooper, Charlie A.

The Illinois Accelerator Research Center (IARC) hosts a new accelerator development program at Fermi National Accelerator Laboratory. IARC provides access to Fermi's state-of-the-art facilities and technologies for research, development and industrialization of particle accelerator technology. In addition to facilitating access to available existing Fermi infrastructure, the IARC Campus has a dedicated 36,000 ft2 Heavy Assembly Building (HAB) with all the infrastructure needed to develop, commission and operate new accelerators. Connected to the HAB is a 47,000 ft2 Office, Technology and Engineering (OTE) building, paid for by the state, that has office, meeting, and light technical space. The OTE building, which contains the Accelerator Physics Center, and nearby Accelerator and Technical divisions provide IARC collaborators with unique access to world class expertise in a wide array of accelerator technologies. At IARC scientists and engineers from Fermilab and academia work side by side with industrial partners to develop breakthroughs in accelerator science and translate them into applications for the nation's health, wealth and security.

Advances in DNA sequencing technologies for high resolution HLA typing.

PubMed

Cereb, Nezih; Kim, Hwa Ran; Ryu, Jaejun; Yang, Soo Young

2015-12-01

This communication describes our experience in large-scale G group-level high resolution HLA typing using three different DNA sequencing platforms - ABI 3730 xl, Illumina MiSeq and PacBio RS II. Recent advances in DNA sequencing technologies, so-called next generation sequencing (NGS), have brought breakthroughs in deciphering the genetic information in all living species at a large scale and at an affordable level. The NGS DNA indexing system allows sequencing multiple genes for large number of individuals in a single run. Our laboratory has adopted and used these technologies for HLA molecular testing services. We found that each sequencing technology has its own strengths and weaknesses, and their sequencing performances complement each other. HLA genes are highly complex and genotyping them is quite challenging. Using these three sequencing platforms, we were able to meet all requirements for G group-level high resolution and high volume HLA typing. Copyright © 2015 American Society for Histocompatibility and Immunogenetics. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hettiarachchi, Ganga M.; Donner, Erica; Doelsch, Emmanuel

To understand the biogeochemistry of nutrients and contaminants in environmental media, their speciation and behavior under different conditions and at multiple scales must be determined. Synchrotron radiation-based X-ray techniques allow scientists to elucidate the underlying mechanisms responsible for nutrient and contaminant mobility, bioavailability, and behavior. The continuous improvement of synchrotron light sources and X-ray beamlines around the world has led to a profound transformation in the field of environmental biogeochemistry and, subsequently, to significant scientific breakthroughs. Following this introductory paper, this special collection includes 10 papers that either present targeted reviews of recent advancements in spectroscopic methods that are applicablemore » to environmental biogeochemistry or describe original research studies conducted on complex environmental samples that have been significantly enhanced by incorporating synchrotron radiation-based X-ray technique(s). We believe that the current focus on improving the speciation of ultra-dilute elements in environmental media through the ongoing optimization of synchrotron technologies (e.g., brighter light sources, improved monochromators, more efficient detectors) will help to significantly push back the frontiers of environmental biogeochemistry research. As many of the relevant techniques produce extremely large datasets, we also identify ongoing improvements in data processing and analysis (e.g., software improvements and harmonization of analytical methods) as a significant requirement for environmental biogeochemists to maximize the information that can be gained using these powerful tools.« less

Restoring Executive Confidence in Performance Improvement

ERIC Educational Resources Information Center

Seidman, William; McCauley, Michael

2012-01-01

Many organizations have significantly decreased their investment in performance improvement initiatives because they believe they are too risky. In fact, organizations should invest in performance improvements to build cash reserves and gain market share. Recent scientific breakthroughs have led to the development of methodologies and technologies…

Cost-efficient manufacturing of composite structures

NASA Technical Reports Server (NTRS)

Freeman, W. Tom; Davis, John G.; Johnston, Norman J.

1991-01-01

The Advanced Composites Technology (ACT) program is seeking research breakthroughs that will allow structures made of graphite epoxy materials to replace metals in the wings and fuselages of future aircrafts. NASA's goals are to reduce acquisition cost by 20 to 25 percent, structural weight for a resized aircraft by 40 to 50 percent, and the number of parts by half compared to current production aluminum aircraft. The innovative structural concepts, materials, and fabrication techniques emerging from the ACT program are described, and the relationship between aerospace developments and industrial, commercial, and sporting goods applications are discussed.

Academic-industrial partnerships in drug discovery in the age of genomics.

PubMed

Harris, Tim; Papadopoulos, Stelios; Goldstein, David B

2015-06-01

Many US FDA-approved drugs have been developed through productive interactions between the biotechnology industry and academia. Technological breakthroughs in genomics, in particular large-scale sequencing of human genomes, is creating new opportunities to understand the biology of disease and to identify high-value targets relevant to a broad range of disorders. However, the scale of the work required to appropriately analyze large genomic and clinical data sets is challenging industry to develop a broader view of what areas of work constitute precompetitive research. Copyright © 2015 Elsevier Ltd. All rights reserved.

Drug-eluting coronary stents – focus on improved patient outcomes

PubMed Central

Jaffery, Zehra; Prasad, Amit; Lee, John H; White, Christopher J

2011-01-01

The development of stent has been a major advance in the treatment of obstructive coronary artery disease since the introduction of balloon angioplasty. Subsequently, neointimal hyperplasia within the stent leading to in-stent restenosis emerged as a major obstacle in long-term success of percutaneous coronary intervention. Recent introduction of drug-eluting stents is a major breakthrough to tackle this problem. This review article summarizes stent technology, reviews progress of drug-eluting stents and discusses quality of life, patient satisfaction, and acceptability of percutaneous coronary intervention. PMID:22915977

Averaging business cycles vs. myopia: Do we need a long term vision when developing IRP?

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, C.; Gupta, P.C.

1995-05-01

Utility demand forecasting is inherently imprecise due to the number of uncertainties resulting from business cycles, policy making, technology breakthroughs, national and international political upheavals and the limitations of the forecasting tools. This implies that revisions based primarily on recent experience could lead to unstable forecasts. Moreover, new planning tools are required that provide an explicit consideration of uncertainty and lead to flexible and robust planning tools are required that provide an explicit consideration of uncertainty and lead to flexible and robust planning decisions.

Geothermal energy employment and requirements 1977-1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-12-01

An assessment of the manpower needs of the geothermal industry is presented. The specific objectives were to: derive a base line estimate of the manpower involved in geothermal activities, determine if there is any current or impending likelihood of skill shortages, forecast future employment in the geothermal industry, conduct a technology assessment to ascertain the possibilities of some sudden breakthrough, and suggest alternatives commensurate with the findings. The methodology for fulfilling the objectives is described. Detailed results of these pursuits (objectives) are presented. Alternatives that are suggested, based upon the findings of the study, are summarized.

CRISPR/Cas9: From Genome Engineering to Cancer Drug Discovery

PubMed Central

Luo, Ji

2016-01-01

Advances in translational research are often driven by new technologies. The advent of microarrays, next-generation sequencing, proteomics and RNA interference (RNAi) have led to breakthroughs in our understanding of the mechanisms of cancer and the discovery of new cancer drug targets. The discovery of the bacterial clustered regularly interspaced palindromic repeat (CRISPR) system and its subsequent adaptation as a tool for mammalian genome engineering has opened up new avenues for functional genomics studies. This review will focus on the utility of CRISPR in the context of cancer drug target discovery. PMID:28603775

Ultrathin nanoporous membranes for insulator-based dielectrophoresis

NASA Astrophysics Data System (ADS)

Mukaibo, Hitomi; Wang, Tonghui; Perez-Gonzalez, Victor H.; Getpreecharsawas, Jirachai; Wurzer, Jack; Lapizco-Encinas, Blanca H.; McGrath, James L.

2018-06-01

Insulator-based dielectrophoresis (iDEP) is a simple, scalable mechanism that can be used for directly manipulating particle trajectories in pore-based filtration and separation processes. However, iDEP manipulation of nanoparticles presents unique challenges as the dielectrophoretic force ({F}{{D}{{E}}{{P}}}) exerted on the nanoparticles can easily be overshadowed by opposing kinetic forces. In this study, a molecularly thin, SiN-based nanoporous membrane (NPN) is explored as a breakthrough technology that enhances {F}{{D}{{E}}{{P}}}. By numerically assessing the gradient of the electric field square ({{\

Water Breakthrough Pressure of Cotton Fabrics Treated with Fluorinated Silsesquioxane / Fluoroelastomer Coatings (Preprint)

DTIC Science & Technology

2012-10-01

Clearance Date: 7/20/2012. 14. ABSTRACT Breakthrough pressure is an important parameter associated with the performance of water- resistant fabrics... predicted values based on the geometry of the samples and the surface energy of the components. The theoretical predictions , however, do not explain...Edwards AFB, CA 93524 Abstract Breakthrough pressure is an important parameter associated with the performance of water- resistant fabrics

Evaluating nanoparticle breakthrough during drinking water treatment.

PubMed

Abbott Chalew, Talia E; Ajmani, Gaurav S; Huang, Haiou; Schwab, Kellogg J

2013-10-01

Use of engineered nanoparticles (NPs) in consumer products is resulting in NPs in drinking water sources. Subsequent NP breakthrough into treated drinking water is a potential exposure route and human health threat. In this study we investigated the breakthrough of common NPs--silver (Ag), titanium dioxide (TiO2), and zinc oxide (ZnO)--into finished drinking water following conventional and advanced treatment. NPs were spiked into five experimental waters: groundwater, surface water, synthetic freshwater, synthetic freshwater containing natural organic matter, and tertiary wastewater effluent. Bench-scale coagulation/flocculation/sedimentation simulated conventional treatment, and microfiltration (MF) and ultrafiltration (UF) simulated advanced treatment. We monitored breakthrough of NPs into treated water by turbidity removal and inductively coupled plasma-mass spectrometry (ICP-MS). Conventional treatment resulted in 2-20%, 3-8%, and 48-99% of Ag, TiO2, and ZnO NPs, respectively, or their dissolved ions remaining in finished water. Breakthrough following MF was 1-45% for Ag, 0-44% for TiO2, and 36-83% for ZnO. With UF, NP breakthrough was 0-2%, 0-4%, and 2-96% for Ag, TiO2, and ZnO, respectively. Variability was dependent on NP stability, with less breakthrough of aggregated NPs compared with stable NPs and dissolved NP ions. Although a majority of aggregated or stable NPs were removed by simulated conventional and advanced treatment, NP metals were detectable in finished water. As environmental NP concentrations increase, we need to consider NPs as emerging drinking water contaminants and determine appropriate drinking water treatment processes to fully remove NPs in order to reduce their potential harmful health outcomes.

Creating breakthroughs at 3M.

PubMed

von Hippel, E; Thomke, S; Sonnack, M

1999-01-01

Most senior managers want their product development teams to create break-throughs--new products that will allow their companies to grow rapidly and maintain high margins. But more often they get incremental improvements to existing products. That's partly because companies must compete in the short term. Searching for breakthroughs is expensive and time consuming; line extensions can help the bottom line immediately. In addition, developers simply don't know how to achieve breakthroughs, and there is usually no system in place to guide them. By the mid-1990s, the lack of such a system was a problem even for an innovative company like 3M. Then a project team in 3M's Medical-Surgical Markets Division became acquainted with a method for developing breakthrough products: the lead user process. The process is based on the fact that many commercially important products are initially thought of and even prototyped by "lead users"--companies, organizations, or individuals that are well ahead of market trends. Their needs are so far beyond those of the average user that lead users create innovations on their own that may later contribute to commercially attractive breakthroughs. The lead user process transforms the job of inventing breakthroughs into a systematic task of identifying lead users and learning from them. The authors explain the process and how the 3M project team successfully navigated through it. In the end, the team proposed three major new product lines and a change in the division's strategy that has led to the development of breakthrough products. And now several more divisions are using the process to break away from incrementalism.

A multi-directional tracer test in the fractured Chalk aquifer of E. Yorkshire, UK.

PubMed

Hartmann, S; Odling, N E; West, L J

2007-12-07

A multi-borehole radial tracer test has been conducted in the confined Chalk aquifer of E. Yorkshire, UK. Three different tracer dyes were injected into three injection boreholes and a central borehole, 25 m from the injection boreholes, was pumped at 330 m(3)/d for 8 days. The breakthrough curves show that initial breakthrough and peak times were fairly similar for all dyes but that recoveries varied markedly from 9 to 57%. The breakthrough curves show a steep rise to a peak and long tail, typical of dual porosity aquifers. The breakthrough curves were simulated using a 1D dual porosity model. Model input parameters were constrained to acceptable ranges determined from estimations of matrix porosity and diffusion coefficient, fracture spacing, initial breakthrough times and bulk transmissivity of the aquifer. The model gave equivalent hydraulic apertures for fractures in the range 363-384 microm, dispersivities of 1 to 5 m and matrix block sizes of 6 to 9 cm. Modelling suggests that matrix block size is the primary controlling parameter for solute transport in the aquifer, particularly for recovery. The observed breakthrough curves suggest results from single injection-borehole tracer tests in the Chalk may give initial breakthrough and peak times reasonably representative of the aquifer but that recovery is highly variable and sensitive to injection and abstraction borehole location. Consideration of aquifer heterogeneity suggests that high recoveries may be indicative of a high flow pathway adjacent, but not necessarily connected, to the injection and abstraction boreholes whereas low recoveries may indicate more distributed flow through many fractures of similar aperture.

Evaluating Nanoparticle Breakthrough during Drinking Water Treatment

PubMed Central

Chalew, Talia E. Abbott; Ajmani, Gaurav S.; Huang, Haiou

2013-01-01

Background: Use of engineered nanoparticles (NPs) in consumer products is resulting in NPs in drinking water sources. Subsequent NP breakthrough into treated drinking water is a potential exposure route and human health threat. Objectives: In this study we investigated the breakthrough of common NPs—silver (Ag), titanium dioxide (TiO2), and zinc oxide (ZnO)—into finished drinking water following conventional and advanced treatment. Methods: NPs were spiked into five experimental waters: groundwater, surface water, synthetic freshwater, synthetic freshwater containing natural organic matter, and tertiary wastewater effluent. Bench-scale coagulation/flocculation/sedimentation simulated conventional treatment, and microfiltration (MF) and ultrafiltration (UF) simulated advanced treatment. We monitored breakthrough of NPs into treated water by turbidity removal and inductively coupled plasma–mass spectrometry (ICP-MS). Results: Conventional treatment resulted in 2–20%, 3–8%, and 48–99% of Ag, TiO2, and ZnO NPs, respectively, or their dissolved ions remaining in finished water. Breakthrough following MF was 1–45% for Ag, 0–44% for TiO2, and 36–83% for ZnO. With UF, NP breakthrough was 0–2%, 0–4%, and 2–96% for Ag, TiO2, and ZnO, respectively. Variability was dependent on NP stability, with less breakthrough of aggregated NPs compared with stable NPs and dissolved NP ions. Conclusions: Although a majority of aggregated or stable NPs were removed by simulated conventional and advanced treatment, NP metals were detectable in finished water. As environmental NP concentrations increase, we need to consider NPs as emerging drinking water contaminants and determine appropriate drinking water treatment processes to fully remove NPs in order to reduce their potential harmful health outcomes. Citation: Abbott Chalew TE, Ajmani GS, Huang H, Schwab KJ. 2013. Evaluating nanoparticle breakthrough during drinking water treatment. Environ Health Perspect 121:1161–1166; http://dx.doi.org/10.1289/ehp.1306574 PMID:23933526

Breakthrough: X-ray Laser Captures Atoms and Molecules in Action

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bergmann, Uwe

2012-04-26

The Linac Coherent Light Source at SLAC is the world's most powerful X-ray laser. Just two years after turning on in 2009, breakthrough science is emerging from the LCLS at a rapid pace. A recent experiment used the X-rays to create and probe a 2-million-degree piece of matter in a controlled way for the first time-a significant leap toward understanding the extreme conditions found in the hearts of stars and giant planets, and a finding which could further guide research into nuclear fusion, the mechanism that powers the sun. Upcoming experiments will investigate the fundamental, atomic-scale processes behind such phenomenamore » as superconductivity and magnetism, as well as peering into the molecular workings of photosynthesis in plants.« less

NASA technology investments: building America's future

NASA Astrophysics Data System (ADS)

Peck, Mason

2013-03-01

Investments in technology and innovation enable new space missions, stimulate the economy, contribute to the nation's global competitiveness, and inspire America's next generation of scientists, engineers and astronauts. Chief Technologist Mason Peck will provide an overview of NASA's ambitious program of space exploration that builds on new technologies, as well as proven capabilities, as it expands humanity's reach into the solar system while providing broadly-applicable benefits here on Earth. Peck also will discuss efforts of the Office of the Chief Technologist to coordinate the agency's overall technology portfolio, identifying development needs, ensuring synergy and reducing duplication, while furthering the national initiatives as outlined by President Obama's Office of Science and Technology Policy. By coordinating technology programs within NASA, Peck's office facilitates integration of available and new technology into operational systems that support specific human-exploration missions, science missions, and aeronautics. The office also engages other government agencies and the larger aerospace community to develop partnerships in areas of mutual interest that could lead to new breakthrough capabilities. NASA technology transfer translates our air and space missions into societal benefits for people everywhere. Peck will highlight NASA's use of technology transfer and commercialization to help American entrepreneurs and innovators develop technological solutions that stimulate the growth of the innovation economy by creating new products and services, new business and industries and high quality, sustainable jobs.

The break-even point: when medical advances are less important than improving the fidelity with which they are delivered.

PubMed

Woolf, Steven H; Johnson, Robert E

2005-01-01

Society invests billions of dollars in the development of new drugs and technologies but comparatively little in the fidelity of health care, that is, improving systems to ensure the delivery of care to all patients in need. Using mathematical arguments and a nomogram, we demonstrate that technological advances must yield dramatic, often unrealistic increases in efficacy to do more good than could be accomplished by improving fidelity. In 2 examples (the development of anti-platelet agents and statins), we show that enhanced efficacy failed to achieve the health gains that would have occurred by delivering older agents to all eligible patients. Society's huge investment in technological innovations that only modestly improve efficacy, by consuming resources needed for improved delivery of care, may cost more lives than it saves. The misalignment of priorities is driven partly by the commercial interests of industry and by the public's appetite for technological breakthroughs, but health outcomes ultimately suffer. Health, economic, and moral arguments make the case for spending less on technological advances and more on improving systems for delivering care.

First Thin Film Festival

NASA Astrophysics Data System (ADS)

Samson, Philippe

2005-05-01

The constant evolution of the satellite market is asking for better technical performances and reliability for a reduced cost. Solar array is in front line of this challenge.This can be achieved by present technologies progressive improvement in cost reduction or by technological breakthrough.To reach an effective End Of Live performance100 W/kg of solar array is not so easy, even if you suppose that the mass of everything is nothing!Thin film cells are potential candidate to contribute to this challenge with certain confidence level and consequent development plan validation and qualification on ground and flight.Based on a strong flight heritage in flexible Solar Array design, the work has allowed in these last years, to pave the way on road map of thin film technologies . This is encouraged by ESA on many technological contracts put in concurrent engineering.CISG was selected cell and their strategy of design, contributions and results will be presented.Trade-off results and Design to Cost solutions will discussed.Main technical drivers, system design constraints, market access, key technologies needed will be detailed in this paper and the resulting road-map and development plan will be presented.

Role of superconducting electronics in advancing science and technology (invited) (abstract)

NASA Astrophysics Data System (ADS)

Faris, S. M.

1988-08-01

The promises of the ultrahigh-performance properties of superconductivity and Josephson junction technologies have been known for quite some time. This presentation describes the first superconducting electronics and measurement system and its important role as a major tool to advance microwave and millimeter wave technologies. This breakthrough tool is a sampling oscilloscope with 5-ps rise time, 50-μV sensitivity, and a time domain reflectometer with 8-ps rise time. In order to achieve these performance goals, several technological hurdles had to be overcome including perfecting a manufacturing process for building Josephson junction IC chips, developing an innovative cooling technique, developing interfaces and interconnections with bandwidths in excess of 70 GHz, and developing the room-temperature hardware and software necessary to make the instruments convenient, easy to use, easy to learn, in addition to making available functions and features users have come to expect from sophisticated digital test instrumentation. These technological developments are stepping stones leading to the realization of more sophisticated and complex electronic systems satisfying the needs of scientists, technologists, and engineers. The unprecedented speed and sensitivity make it possible to attack new frontiers.

Breakthrough Propulsion Physics Workshop Preliminary Results

NASA Technical Reports Server (NTRS)

Millis, Marc G.

1997-01-01

In August, 1997, a NASA workshop was held to assess the prospects emerging from physics that might lead to creating the ultimate breakthroughs in space transportation: propulsion that requires no propellant mass, attaining the maximum transit speeds physically possible, and breakthrough methods of energy production to power such devices. Because these propulsion goals are presumably far from fruition, a special emphasis was to identify affordable, near-term, and credible research that could make measurable progress toward these propulsion goals. Experiments and theories were discussed regarding the coupling of gravity and electromagnetism, vacuum fluctuation energy, warp drives and wormholes, and superluminal quantum tunneling. Preliminary results of this workshop are presented, along with the status of the Breakthrough Propulsion Physics program that conducted this workshop.

Investigating surety methodologies for cognitive systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Caudell, Thomas P.; Peercy, David Eugene; Mills, Kristy

2006-11-01

Advances in cognitive science provide a foundation for new tools that promise to advance human capabilities with significant positive impacts. As with any new technology breakthrough, associated technical and non-technical risks are involved. Sandia has mitigated both technical and non-technical risks by applying advanced surety methodologies in such areas as nuclear weapons, nuclear reactor safety, nuclear materials transport, and energy systems. In order to apply surety to the development of cognitive systems, we must understand the concepts and principles that characterize the certainty of a system's operation as well as the risk areas of cognitive sciences. This SAND report documentsmore » a preliminary spectrum of risks involved with cognitive sciences, and identifies some surety methodologies that can be applied to potentially mitigate such risks. Some potential areas for further study are recommended. In particular, a recommendation is made to develop a cognitive systems epistemology framework for more detailed study of these risk areas and applications of surety methods and techniques.« less

Pleiotropic functions of the yeast Greatwall-family protein kinase Rim15p: a novel target for the control of alcoholic fermentation.

PubMed

Watanabe, Daisuke; Takagi, Hiroshi

2017-06-01

Rim15p, a Greatwall-family protein kinase in yeast Saccharomyces cerevisiae, is required for cellular nutrient responses, such as the entry into quiescence and the induction of meiosis and sporulation. In higher eukaryotes, the orthologous gene products are commonly involved in the cell cycle G 2 /M transition. How are these pleiotropic functions generated from a single family of protein kinases? Recent advances in both research fields have identified the conserved Greatwall-mediated signaling pathway and a variety of downstream target molecules. In addition, our studies of S. cerevisiae sake yeast strains revealed that Rim15p also plays a significant role in the control of alcoholic fermentation. Despite an extensive history of research on glycolysis and alcoholic fermentation, there has been no critical clue to artificial modification of fermentation performance of yeast cells. Our finding of an in vivo metabolic regulatory mechanism is expected to provide a major breakthrough in yeast breeding technologies for fermentation applications.

Why medical research needs a new specialty of 'pure medical science'.

PubMed

Charlton, Bruce G

2006-01-01

Sciences tend to go through boom and bust phases. Following decades of rapid expansion, medical science is now due for a collapse in overall funding. Furthermore, there has been a decline in the rate of therapeutic innovation, with fewer significant breakthroughs and little progress in several major areas of medicine such as oncology, psychiatry and autoimmune disorders. Mainstream medical research has gradually evolved into a form similar to industrial research and development (R&D), aiming at steady, reliable, predictable progress by ringing minor variations on existing approaches. Where this risk-averse approach is failing, a more speculative strategy is indicated. A new research specialty of 'pure medical science' would aim to seek radical new theories, technologies and therapies, and subject these to professional evaluation to the point where they can be applied in practice by more mainstream 'applied' medical scientists. A specialty of 'pure medical science' might be launched by financial support from patrons who wish to be associated with an elite new medical research discipline.

Identification of Nanoparticle Prototypes and Archetypes.

PubMed

Fernandez, Michael; Barnard, Amanda S

2015-12-22

High-throughput (HT) computational characterization of nanomaterials is poised to accelerate novel material breakthroughs. The number of possible nanomaterials is increasing exponentially along with their complexity, and so statistical and information technology will play a fundamental role in rationalizing nanomaterials HT data. We demonstrate that multivariate statistical analysis of heterogeneous ensembles can identify the truly significant nanoparticles and their most relevant properties. Virtual samples of diamond nanoparticles and graphene nanoflakes are characterized using clustering and archetypal analysis, where we find that saturated particles are defined by their geometry, while nonsaturated nanoparticles are defined by their carbon chemistry. At the complex hull of the nanostructure spaces, a combination of complex archetypes can efficiency describe a large number of members of the ensembles, whereas the regular shapes that are typically assumed to be representative can only describe a small set of the most regular morphologies. This approach provides a route toward the characterization of computationally intractable virtual nanomaterial spaces, which can aid nanomaterials discovery in the foreseen big data scenario.

Early screening of an infant's visual system

NASA Astrophysics Data System (ADS)

Costa, Manuel F. M.; Jorge, Jorge M.

1999-06-01

It is of utmost importance to the development of the child's visual system that she perceives clear focused retinal images. Furthermore if the refractive problems are not corrected in due time amblyopia may occur--myopia and hyperopia can only cause important problems in the future when they are significantly large, however for the astigmatism (rather frequent in infants) and anisometropia the problems tend to be more stringent. The early evaluation of the visual status of human infants is thus of critical importance. Photorefraction is a convenient technique for this kind of subjects. Essentially a light beam is delivered into the eyes. It is refracted by the ocular media, strikes the retina, focusing or not, reflects off and is collected by a camera. The photorefraction setup we established using new technological breakthroughs on the fields of imaging devices, digital image processing and fiber optics, allows a fast noninvasive evaluation of children visual status (refractive errors, accommodation, strabismus, ...). Results of the visual screening of a group of risk' child descents of blinds or amblyopes will be presented.

Multi-walled carbon nanotubes suppress potassium channel activities in PC12 cells

NASA Astrophysics Data System (ADS)

Xu, Haifei; Bai, Juan; Meng, Jie; Hao, Wei; Xu, Haiyan; Cao, Ji-Min

2009-07-01

The advancement in nanotechnology has produced technological and conceptual breakthroughs but the effects nanomaterials have on organisms at the cellular level are poorly understood. Here we report that carboxyl-terminated multi-walled carbon nanotubes (MWCNTs) act as antagonists of three types of potassium channels as assessed by whole-cell patch clamp electrophysiology on undifferentiated pheochromocytoma (PC12) cells. Our results showed that carboxyl-terminated MWCNTs suppress the current densities of Ito, IK and IK1 in a time-dependent and irreversible manner. The suppressions were most distinct 24 h after incubation with MWCNTs. However, MWCNTs did not significantly change the expression levels of reactive oxygen species (ROS) or intracellular free calcium and also did not alter the mitochondrial membrane potential (ΔΨm) in PC12 cells. These results suggest that oxidative stress was not involved in the MWCNTs suppression of Ito, IK and IK1 current densities. Nonetheless, the suppression of potassium currents by MWCNTs will impact on electrical signaling of excitable cells such as neurons and muscles.

Frontiers in In-Situ Cosmic Dust Detection and Analysis

NASA Astrophysics Data System (ADS)

Sternovsky, Zoltán; Auer, Siegfried; Drake, Keith; Grün, Eberhard; Horányi, Mihály; Le, Huy; Srama, Ralf; Xie, Jianfeng

2011-11-01

In-situ cosmic dust instruments and measurements played a critical role in the emergence of the field of dusty plasmas. The major breakthroughs included the discovery of β-meteoroids, interstellar dust particles within the solar system, Jovian stream particles, and the detection and analysis of Enceladus's plumes. The science goals of cosmic dust research require the measurements of the charge, the spatial, size and velocity distributions, and the chemical and isotopic compositions of individual dust particles. In-situ dust instrument technology has improved significantly in the last decade. Modern dust instruments with high sensitivity can detect submicron-sized particles even at low impact velocities. Innovative ion optics methods deliver high mass resolution, m/dm>100, for chemical and isotopic analysis. The accurate trajectory measurement of cosmic dust is made possible even for submicron-sized grains using the Dust Trajectory Sensor (DTS). This article is a brief review of the current capabilities of modern dust instruments, future challenges and opportunities in cosmic dust research.

Inclusion flotation-driven channel segregation in solidifying steels

PubMed Central

Li, Dianzhong; Chen, Xing-Qiu; Fu, Paixian; Ma, Xiaoping; Liu, Hongwei; Chen, Yun; Cao, Yanfei; Luan, Yikun; Li, Yiyi

2014-01-01

Channel segregation, which is featured by the strip-like shape with compositional variation in cast materials due to density contrast-induced flow during solidification, frequently causes the severe destruction of homogeneity and some fatal damage. An investigation of its mechanism sheds light on the understanding and control of the channel segregation formation in solidifying metals, such as steels. Until now, it still remains controversial what composes the density contrasts and, to what extent, how it affects channel segregation. Here we discover a new force of inclusion flotation that drives the occurrence of channel segregation. It originates from oxide-based inclusions (Al2O3/MnS) and their sufficient volume fraction-driven flotation becomes stronger than the traditionally recognized inter-dendritic thermosolutal buoyancy, inducing the destabilization of the mushy zone and dominating the formation of channels. This study uncovers the mystery of oxygen in steels, extends the classical macro-segregation theory and highlights a significant technological breakthrough to control macrosegregation. PMID:25422943

Ultrastable Natural Ester-Based Nanofluids for High Voltage Insulation Applications.

PubMed

Peppas, Georgios D; Bakandritsos, Aristides; Charalampakos, Vasilis P; Pyrgioti, Eleftheria C; Tucek, Jiri; Zboril, Radek; Gonos, Ioannis F

2016-09-28

Nanofluids for high voltage insulation systems have emerged as a potential substitute for liquid dielectrics in industrial applications. Nevertheless, the sedimentation of nanoparticles has been so far a serious barrier for their wide and effective exploitation. The present work reports on the development and in-depth characterization of colloidally ultrastable natural ester oil insulation systems containing iron oxide nanocrystals which lift the problem of sedimentation and phase separation. Compared to state-of-the-art systems, the final product is endowed with increased dielectric strength, faster thermal response, lower dielectric losses (decreased dissipation factor: tan δ), and very high endurance during discharge stressing. The developed nanofluid was studied and compared with a similar system containing commercial iron oxide nanoparticles, the latter demonstrating extensive sedimentation. Herein, the dielectric properties of the nanofluids are analyzed at various concentrations by means of breakdown voltage and dissipation factor measurements. The characterization techniques unequivocally demonstrate the high performance reliability of the reported nanofluid, which constitutes a significant breakthrough in the field of high voltage insulation technologies.

Benchmarking of TALE- and CRISPR/dCas9-Based Transcriptional Regulators in Mammalian Cells for the Construction of Synthetic Genetic Circuits.

PubMed

Lebar, Tina; Jerala, Roman

2016-10-21

Transcriptional activator-like effector (TALE)- and CRISPR/Cas9-based designable recognition domains represent a technological breakthrough not only for genome editing but also for building designed genetic circuits. Both platforms are able to target rarely occurring DNA segments, even within complex genomes. TALE and dCas9 domains, genetically fused to transcriptional regulatory domains, can be used for the construction of engineered logic circuits. Here we benchmarked the performance of the two platforms, targeting the same DNA sequences, to compare their advantages for the construction of designed circuits in mammalian cells. Optimal targeting strands for repression and activation of dCas9-based designed transcription factors were identified; both platforms exhibited good orthogonality and were used to construct functionally complete NOR gates. Although the CRISPR/dCas9 system is clearly easier to construct, TALE-based activators were significantly stronger, and the TALE-based platform performed better, especially for the construction of layered circuits.

HgCdTe APD-based linear-mode photon counting components and ladar receivers

NASA Astrophysics Data System (ADS)

Jack, Michael; Wehner, Justin; Edwards, John; Chapman, George; Hall, Donald N. B.; Jacobson, Shane M.

2011-05-01

Linear mode photon counting (LMPC) provides significant advantages in comparison with Geiger Mode (GM) Photon Counting including absence of after-pulsing, nanosecond pulse to pulse temporal resolution and robust operation in the present of high density obscurants or variable reflectivity objects. For this reason Raytheon has developed and previously reported on unique linear mode photon counting components and modules based on combining advanced APDs and advanced high gain circuits. By using HgCdTe APDs we enable Poisson number preserving photon counting. A metric of photon counting technology is dark count rate and detection probability. In this paper we report on a performance breakthrough resulting from improvement in design, process and readout operation enabling >10x reduction in dark counts rate to ~10,000 cps and >104x reduction in surface dark current enabling long 10 ms integration times. Our analysis of key dark current contributors suggest that substantial further reduction in DCR to ~ 1/sec or less can be achieved by optimizing wavelength, operating voltage and temperature.

Modeling packed bed sorbent systems with the Pore Surface Diffusion Model: Evidence of facilitated surface diffusion of arsenate in nano-metal (hydr)oxide hybrid ion exchange media.

PubMed

Dale, Sachie; Markovski, Jasmina; Hristovski, Kiril D

2016-09-01

This study explores the possibility of employing the Pore Surface Diffusion Model (PSDM) to predict the arsenic breakthrough curve of a packed bed system operated under continuous flow conditions with realistic groundwater, and consequently minimize the need to conduct pilot scale tests. To provide the nano-metal (hydr)oxide hybrid ion exchange media's performance in realistic water matrices without engaging in taxing pilot scale testing, the multi-point equilibrium batch sorption tests under pseudo-equilibrium conditions were performed; arsenate breakthrough curve of short bed column (SBC) was predicted by the PSDM in the continuous flow experiments; SBC tests were conducted under the same conditions to validate the model. The overlapping Freundlich isotherms suggested that the water matrix and competing ions did not have any denoting effect on sorption capacity of the media when the matrix was changed from arsenic-only model water to real groundwater. As expected, the PSDM provided a relatively good prediction of the breakthrough profile for arsenic-only model water limited by intraparticle mass transports. In contrast, the groundwater breakthrough curve demonstrated significantly faster intraparticle mass transport suggesting to a surface diffusion process, which occurs in parallel to the pore diffusion. A simple selection of DS=1/2 DP appears to be sufficient when describing the facilitated surface diffusion of arsenate inside metal (hydr)oxide nano-enabled hybrid ion-exchange media in presence of sulfate, however, quantification of the factors determining the surface diffusion coefficient's magnitude under different treatment scenarios remained unexplored. Copyright © 2015 Elsevier B.V. All rights reserved.

Antibiotic resistance patterns of community-acquired urinary tract infections in children with vesicoureteral reflux receiving prophylactic antibiotic therapy.

PubMed

Cheng, Chi-Hui; Tsai, Ming-Horng; Huang, Yhu-Chering; Su, Lin-Hui; Tsau, Yong-Kwei; Lin, Chi-Jen; Chiu, Cheng-Hsun; Lin, Tzou-Yien

2008-12-01

The goal was to examine bacterial antimicrobial resistance of recurrent urinary tract infections in children receiving antibiotic prophylaxis because of primary vesicoureteral reflux. We reviewed data retrospectively for children with documented vesicoureteral reflux in 2 hospitals during a 5-year follow-up period. The patients were receiving co-trimoxazole, cephalexin, or cefaclor prophylaxis or prophylaxis with a sequence of different antibiotics (alternative monotherapy). Demographic data, degree of vesicoureteral reflux, prophylactic antibiotics prescribed, and antibiotic sensitivity results of first urinary tract infections and breakthrough urinary tract infections were recorded. Three hundred twenty-four patients underwent antibiotic prophylaxis (109 with co-trimoxazole, 100 with cephalexin, 44 with cefaclor, and 71 with alternative monotherapy) in one hospital and 96 children underwent co-trimoxazole prophylaxis in the other hospital. Breakthrough urinary tract infections occurred in patients from both hospitals (20.4% and 25%, respectively). Escherichia coli infection was significantly less common in children receiving antibiotic prophylaxis, compared with their initial episodes of urinary tract infection, at both hospitals. Children receiving cephalosporin prophylaxis were more likely to have an extended-spectrum beta-lactamase-producing organism for breakthrough urinary tract infections, compared with children with co-trimoxazole prophylaxis. Antimicrobial susceptibilities to almost all antibiotics decreased with cephalosporin prophylaxis when recurrent urinary tract infections developed. The extent of decreased susceptibilities was also severe for prophylaxis with a sequence of different antibiotics. However, antimicrobial susceptibilities decreased minimally in co-trimoxazole prophylaxis groups. Children receiving cephalosporin prophylaxis are more likely to have extended-spectrum beta-lactamase-producing bacteria or multidrug-resistant uropathogens other than E coli for breakthrough urinary tract infections; therefore, these antibiotics are not appropriate for prophylactic use in patients with vesicoureteral reflux. Co-trimoxazole remains the preferred prophylactic agent for vesicoureteral reflux.

High-voltage integrated active quenching circuit for single photon count rate up to 80 Mcounts/s.

PubMed

Acconcia, Giulia; Rech, Ivan; Gulinatti, Angelo; Ghioni, Massimo

2016-08-08

Single photon avalanche diodes (SPADs) have been subject to a fast improvement in recent years. In particular, custom technologies specifically developed to fabricate SPAD devices give the designer the freedom to pursue the best detector performance required by applications. A significant breakthrough in this field is represented by the recent introduction of a red enhanced SPAD (RE-SPAD) technology, capable of attaining a good photon detection efficiency in the near infrared range (e.g. 40% at a wavelength of 800 nm) while maintaining a remarkable timing resolution of about 100ps full width at half maximum. Being planar, the RE-SPAD custom technology opened the way to the development of SPAD arrays particularly suited for demanding applications in the field of life sciences. However, to achieve such excellent performance custom SPAD detectors must be operated with an external active quenching circuit (AQC) designed on purpose. Next steps toward the development of compact and practical multichannel systems will require a new generation of monolithically integrated AQC arrays. In this paper we present a new, fully integrated AQC fabricated in a high-voltage 0.18 µm CMOS technology able to provide quenching pulses up to 50 Volts with fast leading and trailing edges. Although specifically designed for optimal operation of RE-SPAD devices, the new AQC is quite versatile: it can be used with any SPAD detector, regardless its fabrication technology, reaching remarkable count rates up to 80 Mcounts/s and generating a photon detection pulse with a timing jitter as low as 119 ps full width at half maximum. The compact design of our circuit has been specifically laid out to make this IC a suitable building block for monolithically integrated AQC arrays.