Core trainee boot camp-A method for improving technical and non-technical skills of novice surgical trainees. A before and after study.

PubMed

Bamford, R; Langdon, L; Rodd, C A; Eastaugh-Waring, S; Coulston, J E

2018-04-10

The transition to surgical training can be a stressful time for trainees and is most evident during national handover periods where new graduates start and senior trainees rotate to new programmes. During this time, patient mortality can increase and Hospital efficiency reduces. This influence is compounded by the impact of working time directives. Intensive, simulation rich training programmes or "Boot Camps" have been postulated as a solution. This article highlights the development of a surgical boot camp for novice surgical trainees and the impact this can have on training. A novel surgical boot camp was developed for all trainees within a surgical training region including nine acute NHS trusts. Participating cohort of trainees completed pre and post course questionnaires to assess technical and non-technical skills. 25 trainees attended and completed the pre and post boot camp questionnaire. Significant improvements were seen with technical skills (p = 0.0429), overall non-technical skills (p < 0.001) including leadership (p = 0.022), communication (p = 0.010), situational awareness (p = 0.022), patient handover (p = 0.003), ward round skills (p = 0.005) and outpatient skill (p = 0.002). Trainees reported significantly increased ability to assess and manage a critically unwell patient (p = 0.001) and a trauma patient (p = 0.001). 96% of trainees have utilised the skills they learnt on Boot Camp and all trainees would recommend it as an induction programme. Surgical Boot Camps offer a timely chance to develop technical and non-technical skills whilst enhancing a trainee's confidence and knowledge and reduce the patient safety impact of the handover period. Copyright © 2018. Published by Elsevier Ltd.

Does a Curriculum Integration Intervention to Improve the Mathematics Achievement of Students Diminish Their Acquisition of Technical Competence? An Experimental Study in Agricultural Mechanics

ERIC Educational Resources Information Center

Parr, Brian A.; Edwards, M. Craig; Leising, James G.

2008-01-01

The purpose of this study was to empirically test the hypothesis that students who participated in a contextualized, mathematics-enhanced high school agricultural power and technology curriculum and aligned instructional approach would not experience significant diminishment in acquisition of technical skills related to agricultural power and…

Robotic-Assisted Versus Manual Prostatic Arterial Embolization for Benign Prostatic Hyperplasia: A Comparative Analysis.

PubMed

Bagla, Sandeep; Smirniotopoulos, John; Orlando, Julie C; Piechowiak, Rachel

2017-03-01

Prostatic artery embolization (PAE) is a safe and efficacious procedure for benign prostatic hyperplasia (BPH), though is technically challenging. We present our experience of technical and clinical outcomes of robotic and manual PAE in patients with BPH. IRB-approved retrospective study of 40 consecutive patients 49-81 years old with moderate or severe grade BPH from May 2014 to July 2015: 20 robotic-assisted PAE (group 1), 20 manual PAE (group 2). Robotic-assisted PAE was performed using the Magellan Robotic System. American Urological Association (AUA-SI) score, cost, technical and clinical success, radiation dose, fluoroscopy, and procedure time were reviewed. Statistical analysis was performed within and between each group using paired t test and one-way analysis of variance respectively, at 1 and 3 months. No significant baseline differences in age and AUA-SI between groups. Technical success was 100% (group 1) and 95% (group 2). One unsuccessful subject from group 2 returned for a successful embolization using robotic assistance. Fluoroscopy and procedural times were similar between groups, with a non-significant lower patient radiation dose in group 1 (30,632.8 mGy/cm 2 vs 35,890.9, p = 0.269). Disposable cost was significantly different between groups with the robotic-assisted PAE incurring a higher cost (group 1 $4530.2; group 2 $1588.5, p < 0.0001). Clinical improvement was significant in both arms at 3 months: group 1 mean change in AUA-SI of 8.3 (p = 0.006), group 2: 9.6 (p < 0.0001). No minor or major complications occurred. Robotic-assisted PAE offers technical success comparable to manual PAE, with similar clinical improvement with an increased cost.

Improving and monitoring air quality.

PubMed

DuPont, André

2018-05-01

Since the authorization of the Clean Air Act Amendments of 1990, the air quality in the USA has significantly improved because of strong public support. The lessons learned over the last 25 years are being shared with the policy analysts, technical professionals, and scientist who endeavor to improve air quality in their communities. This paper will review how the USA has achieved the "high" standard of air quality that was envisioned in the early 1990s. This document will describe SO 2 gas emission reduction technology and highlight operation of emission monitoring technology. This paper describes the basic process operation of an air pollution control scrubber. A technical review of measures required to operate and maintain a large-scale pollution control system will be described. Also, the author explains how quality assurance procedures in performance of continuous emission monitoring plays a significant role in reducing air pollution.

Comparison of Traditional and Innovative Techniques to Solve Technical Challenges

NASA Technical Reports Server (NTRS)

Perchonok, Michele

2011-01-01

This slide presentation reviews the use of traditional and innovative techniques to solve technical challenges in food storage technology. The planning for a mission to Mars is underway, and the food storage technology improvements requires that improvements be made. This new technology is required, because current food storage technology is inadequate,refrigerators or freezers are not available for food preservation, and that a shelf life of 5 years is expected. A 10 year effort to improve food packaging technology has not enhanced significantly food packaging capabilities. Two innovation techniques were attempted InnoCentive and Yet2.com and have provided good results, and are still under due diligence for solver verification.

Can branding by health care provider organizations drive the delivery of higher technical and service quality?

PubMed

Snihurowych, Roman R; Cornelius, Felix; Amelung, Volker Eric

2009-01-01

Despite the widespread use of branding in nearly all other major industries, most health care service delivery organizations have not fully embraced the practices and processes of branding. Facilitating the increased and appropriate use of branding among health care delivery organizations may improve service and technical quality for patients. This article introduces the concepts of branding, as well as making the case that the use of branding may improve the quality and financial performance of organizations. The concepts of branding are reviewed, with examples from the literature used to demonstrate their potential application within health care service delivery. The role of branding for individual organizations is framed by broader implications for health care markets. Branding strategies may have a number of positive effects on health care service delivery, including improved technical and service quality. This may be achieved through more transparent and efficient consumer choice, reduced costs related to improved patient retention, and improved communication and appropriateness of care. Patient satisfaction may be directly increased as a result of branding. More research into branding could result in significant quality improvements for individual organizations, while benefiting patients and the health system as a whole.

Efficacy of simulation-based trauma team training of non-technical skills. A systematic review.

PubMed

Gjeraa, K; Møller, T P; Østergaard, D

2014-08-01

Trauma resuscitation is a complex situation, and most organisations have multi-professional trauma teams. Non-technical skills are challenged during trauma resuscitation, and they play an important role in the prevention of critical incidents. Simulation-based training of these is recommended. Our research question was: Does simulation-based trauma team training of non-technical skills have effect on reaction, learning, behaviour or patient outcome? The authors searched PubMed, EMBASE and the Cochrane Library and found 13 studies eligible for analysis. We described and compared the educational interventions and the evaluations of effect according to the four Kirkpatrick levels: reaction, learning (knowledge, skills, attitudes), behaviour (in a clinical setting) and patient outcome. No studies were randomised, controlled and blinded, resulting in a moderate to high risk of bias. The multi-professional trauma teams had positive reactions to simulation-based training of non-technical skills. Knowledge and skills improved in all studies evaluating the effect on learning. Three studies found improvements in team performance (behaviour) in the clinical setting. One of these found difficulties in maintaining these skills. Two studies evaluated on patient outcome, of which none showed improvements in mortality, complication rate or duration of hospitalisation. A significant effect on learning was found after simulation-based training of the multi-professional trauma team in non-technical skills. Three studies demonstrated significantly increased clinical team performance. No effect on patient outcome was found. All studies had a moderate to high risk of bias. More comprehensive randomised studies are needed to evaluate the effect on patient outcome. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Correlation of technical surgical goals to the GDI and investigation of post-operative GDI change in children with cerebral palsy.

PubMed

Bickley, Christina; Linton, Judi; Scarborough, Nancy; Sullivan, Elroy; Mitchell, Katy; Barnes, Douglas

2017-06-01

The purpose of this study was to introduce a standardized set of surgical technical achievement goals (TAGs) as part of a comprehensive outcome assessment model for children with spastic cerebral palsy (CP) undergoing orthopaedic surgical intervention to improve gait. Examination of relationships of these surgical goals to the Gait Deviation Index (GDI) and use of two assessments in tandem provided a thorough picture of technical surgical outcomes. This study also investigated changes in GDI in children with spastic CP after surgery. Data from 269 participants with spastic CP, aged 4 to 19 years with Gross Motor Function Classification System (GMFCS) levels I, II, and III who underwent lower extremity orthopaedic surgical intervention to improve gait were retrospectively analyzed. Data were examined as one heterogeneous group and sub-grouped based on pattern of involvement and GMFCS level to determine change in GDI and relationships between GDI and TAGs. Differences in TAG achievement and GDI change by GMFCS level suggest a pairing of GDI with another technical measure to be beneficial. Analysis of the outcome tools individually revealed a significant difference between the pre-operative GDI and post-operative GDI mean for the entire group, as well as each of the subgroups. A significant difference in TAG achievement by GMFCS level was also noted. This paper provides evidence that lower extremity orthopedic intervention for the ambulatory child with spastic diplegic or hemiplegic CP improves gait and that a pairing of the GDI and TAGs system is beneficial to capture an accurate technical outcome assessment in both higher and lower functioning patients. Copyright © 2017 Elsevier B.V. All rights reserved.

Improving non-technical skills (teamwork) in post-partum haemorrhage: A grouped randomised trial.

PubMed

Letchworth, Pippa M; Duffy, Shane P; Phillips, Dan

2017-10-01

To determine the effect of a decision support technology on teamwork and associated non-technical (NTS) and technical skills when teams manage post-partum haemorrhage (PPH) in the simulated environment. Multidisciplinary (MDT) maternity teams were taught how to manage post partum haemorrhage. They were randomised to the intervention: using a decision support mobile digital platform or a control group. Each team managed a post-partum simulation, which was recorded and reviewed by assessors. Primary outcome measures to assess teams NTS were the validated Global Assessment of Obstetric Team Performance (GAOTP) and Clinical Teamwork Scale (CTS). Secondary outcome measures were the 'friends and family test', technical skills, and the System Usability Scale (SUS). Sample size estimation was calculated by using 80% power 5% significance two tailed test (p1=85% p2=40%) n=34. 38 teams from August 2014-February 2016, were recruited, technical issues with failure of recording equipment meant 4 teams were excluded from teamwork analysis (1 intervention 3 control). Teamwork improved across all domains with the intervention (using a decision support mobile digital platform) p <0.01. CTS improved between 6.7-16.8% (average 14.2%) and GAOTP between 8.6-17.1% (average 13.5%) for all domains. Using the control group as baseline, the intervention improved teamwork by 25% using CTS and 22% using GAOTP. Fewer technical skills were missed with the intervention (p<0.01). There was no statistical difference in the time technical skills were achieved. Assessors were more likely to recommend intervention teams 87.5% (77/88) than control teams 63.6% (56/88) p<0.01 to their friends or family. The SUS was 'Good' (69) becoming excellently 'Usable' (81.6) over the study period. We report a decision support system, which improved NTS when managing PPH. Lack of teamwork is often cited as the cause of failures in care and we report a usable technology that assists with and improves teamwork during an emergency. Copyright © 2017 Elsevier B.V. All rights reserved.

76 FR 35864 - Proposed Priority; Special Demonstration Programs-National Technical Assistance Projects To...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

... have national significance and improve the performance of State vocational rehabilitation (VR) agencies... that State VR agencies and their partners, need national TA opportunities to improve program management and to keep informed about current effective and promising practices and research in the field of VR...

Identification of safety belt restraint usage characteristics related to four- to thirteen-year-olds : [technical summary].

DOT National Transportation Integrated Search

2013-05-01

Even though overall level of safety on United Sates roadways has improved over the last few decades because of significant vehicle and occupant safety regulations and programs, further improvement is needed. In 2009, 33,808 fatalities and another 2.2...

Recent improvements in the NASA technical report server

NASA Technical Reports Server (NTRS)

Maa, Ming-Hokng; Nelson, Michael L.

1995-01-01

The NASA Technical Report Server (NTRS), a World Wide Web (WWW) report distribution service, has been modified to allow parallel database queries, significantly decreasing user access time by an average factor of 2.3, access from clients behind firewalls and/or proxies which truncate excessively long Uniform Resource Locators (URL's), access to non-Wide Area Information Server (WAIS) databases, and compatibility with the Z39-50.3 protocol.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rhinefrank, Kenneth; Lamb, Bradford; Prudell, Joseph

This Project aims to satisfy objectives of the DOE’s Water Power Program by completing a system detailed design (SDD) and other important activities in the first phase of a utility-scale grid-connected ocean wave energy demonstration. In early 2012, Columbia Power (CPwr) had determined that further cost and performance optimization was necessary in order to commercialize its StingRAY wave energy converter (WEC). CPwr’s progress toward commercialization, and the requisite technology development path, were focused on transitioning toward a commercial-scale demonstration. This path required significant investment to be successful, and the justification for this investment required improved annual energy production (AEP) andmore » lower capital costs. Engineering solutions were developed to address these technical and cost challenges, incorporated into a proposal to the US Department of Energy (DOE), and then adapted to form the technical content and statement of project objectives of the resulting Project (DE-EE0005930). Through Project cost-sharing and technical collaboration between DOE and CPwr, and technical collaboration with Oregon State University (OSU), National Renewable Energy Lab (NREL) and other Project partners, we have demonstrated experimentally that these conceptual improvements have merit and made significant progress towards a certified WEC system design at a selected and contracted deployment site at the Wave Energy Test Site (WETS) at the Marine Corps Base in Oahu, HI (MCBH).« less

Small physician practices in new york needed sustained help to realize gains in quality from use of electronic health records.

PubMed

Ryan, Andrew M; Bishop, Tara F; Shih, Sarah; Casalino, Lawrence P

2013-01-01

The 2009 American Recovery and Reinvestment Act spurred adoption of electronic health records (EHRs) in the United States, through such measures as financial incentives to providers through Medicare and Medicaid and regional extension centers, which provide ongoing technical assistance to practices. Yet the relationship between EHR adoption and quality of care remains poorly understood. We evaluated the early effects on quality of the Primary Care Information Project, which provides subsidized EHRs and technical assistance to primary care practices in underserved neighborhoods in New York City, using the regional extension center model. We found that just general participation in, or exposure to, the project was not enough to improve quality of care. It took sustained exposure on the part of these practices and technical assistance to them before they demonstrated improvement on measures of care most likely to be affected by the use of electronic health records, such as cancer screenings and care for patients with diabetes. Participating in the Primary Care Information Project for nine or more months was associated with significantly improved quality, but only for this limited group of quality measures and only for physicians receiving extensive technical assistance.

Measuring and Benchmarking Technical Efficiency of Public Hospitals in Tianjin, China

PubMed Central

Li, Hao; Dong, Siping

2015-01-01

China has long been stuck in applying traditional data envelopment analysis (DEA) models to measure technical efficiency of public hospitals without bias correction of efficiency scores. In this article, we have introduced the Bootstrap-DEA approach from the international literature to analyze the technical efficiency of public hospitals in Tianjin (China) and tried to improve the application of this method for benchmarking and inter-organizational learning. It is found that the bias corrected efficiency scores of Bootstrap-DEA differ significantly from those of the traditional Banker, Charnes, and Cooper (BCC) model, which means that Chinese researchers need to update their DEA models for more scientific calculation of hospital efficiency scores. Our research has helped shorten the gap between China and the international world in relative efficiency measurement and improvement of hospitals. It is suggested that Bootstrap-DEA be widely applied into afterward research to measure relative efficiency and productivity of Chinese hospitals so as to better serve for efficiency improvement and related decision making. PMID:26396090

Is High Fidelity Simulation the Most Effective Method for the Development of Non-Technical Skills in Nursing? A Review of the Current Evidence

PubMed Central

Lewis, Robin; Strachan, Alasdair; Smith, Michelle McKenzie

2012-01-01

Aim: To review the literature on the use of simulation in the development of non-technical skills in nursing Background: The potential risks to patients associated with learning 'at the bedside' are becoming increasingly unacceptable, and the search for innovative education and training methods that do not expose the patient to preventable errors continues. All the evidence shows that a significant proportion of adverse events in health care is caused by problems relating to the application of the 'non-technical' skills of communication, teamwork, leadership and decision-making. Results: Simulation is positively associated with significantly improved interpersonal communication skills at patient handover, and it has also been clearly shown to improve team behaviours in a wide variety of clinical contexts and clinical personnel, associated with improved team performance in the management of crisis situations. It also enables the effective development of transferable, transformational leadership skills, and has also been demonstrated to improve students' critical thinking and clinical reasoning in complex care situations, and to aid in the development of students' self-efficacy and confidence in their own clinical abilities. Conclusion: High fidelity simulation is able to provide participants with a learning environment in which to develop non-technical skills, that is safe and controlled so that the participants are able to make mistakes, correct those mistakes in real time and learn from them, without fear of compromising patient safety. Participants in simulation are also able to rehearse the clinical management of rare, complex or crisis situations in a valid representation of clinical practice, before practising on patients. PMID:22893783

A combined teamwork training and work standardisation intervention in operating theatres: controlled interrupted time series study.

PubMed

Morgan, Lauren; Pickering, Sharon P; Hadi, Mohammed; Robertson, Eleanor; New, Steve; Griffin, Damian; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; McCulloch, Peter

2015-02-01

Teamwork training and system standardisation have both been proposed to reduce error and harm in surgery. Since the approaches differ markedly, there is potential for synergy between them. Controlled interrupted time series with a 3 month intervention and observation phases before and after. Operating theatres conducting elective orthopaedic surgery in a single hospital system (UK Hospital Trust). Teamwork training based on crew resource management plus training and follow-up support in developing standardised operating procedures. Focus of subsequent standardisation efforts decided by theatre staff. Paired observers watched whole procedures together. We assessed non-technical skills using NOTECHS II, technical performance using glitch rate and compliance with WHO checklist using a simple quality tool. We measured complication and readmission rates and hospital stay using hospital administrative records. Before/after change was compared in the active and control groups using two-way ANOVA and regression models. 1121 patients were operated on before and 1100 after intervention. 44 operations were observed before and 50 afterwards. Non-technical skills (p=0.002) and WHO compliance (p<0.001) improved significantly after the intervention in the active versus the control group. Glitch count improved in both groups and there was no significant effect on clinical outcomes. Combined training in teamwork and system improvement causes marked improvements in team behaviour and WHO performance, but not technical performance or outcome. These findings are consistent with the synergistic hypothesis, but larger controlled studies with a strong implementation strategy are required to test potential outcome effects. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Simulation center training as a means to improve resident performance in percutaneous noncontinuous CT-guided fluoroscopic procedures with dose reduction.

PubMed

Mendiratta-Lala, Mishal; Williams, Todd R; Mendiratta, Vivek; Ahmed, Hafeez; Bonnett, John W

2015-04-01

The purpose of this study was to evaluate the effectiveness of a multifaceted simulation-based resident training for CT-guided fluoroscopic procedures by measuring procedural and technical skills, radiation dose, and procedure times before and after simulation training. A prospective analysis included 40 radiology residents and eight staff radiologists. Residents took an online pretest to assess baseline procedural knowledge. Second-through fourth-year residents' baseline technical skills with a procedural phantom were evaluated. First-through third-year residents then underwent formal didactic and simulation-based procedural and technical training with one of two interventional radiologists and followed the training with 1 month of supervised phantom-based practice. Thereafter, residents underwent final written and practical examinations. The practical examination included essential items from a 20-point checklist, including site and side marking, consent, time-out, and sterile technique along with a technical skills portion assessing pedal steps, radiation dose, needle redirects, and procedure time. The results indicated statistically significant improvement in procedural and technical skills after simulation training. For residents, the median number of pedal steps decreased by three (p=0.001), median dose decreased by 15.4 mGy (p<0.001), median procedure time decreased by 4.0 minutes (p<0.001), median number of needle redirects decreased by 1.0 (p=0.005), and median number of 20-point checklist items successfully completed increased by three (p<0.001). The results suggest that procedural skills can be acquired and improved by simulation-based training of residents, regardless of experience. CT simulation training decreases procedural time, decreases radiation dose, and improves resident efficiency and confidence, which may transfer to clinical practice with improved patient care and safety.

Robotic-Assisted Versus Manual Prostatic Arterial Embolization for Benign Prostatic Hyperplasia: A Comparative Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bagla, Sandeep, E-mail: sandeep.bagla@gmail.com; Smirniotopoulos, John; Orlando, Julie C.

PurposeProstatic artery embolization (PAE) is a safe and efficacious procedure for benign prostatic hyperplasia (BPH), though is technically challenging. We present our experience of technical and clinical outcomes of robotic and manual PAE in patients with BPH.Materials and MethodsIRB-approved retrospective study of 40 consecutive patients 49–81 years old with moderate or severe grade BPH from May 2014 to July 2015: 20 robotic-assisted PAE (group 1), 20 manual PAE (group 2). Robotic-assisted PAE was performed using the Magellan Robotic System. American Urological Association (AUA-SI) score, cost, technical and clinical success, radiation dose, fluoroscopy, and procedure time were reviewed. Statistical analysis was performedmore » within and between each group using paired t test and one-way analysis of variance respectively, at 1 and 3 months.ResultsNo significant baseline differences in age and AUA-SI between groups. Technical success was 100% (group 1) and 95% (group 2). One unsuccessful subject from group 2 returned for a successful embolization using robotic assistance. Fluoroscopy and procedural times were similar between groups, with a non-significant lower patient radiation dose in group 1 (30,632.8 mGy/cm{sup 2} vs 35,890.9, p = 0.269). Disposable cost was significantly different between groups with the robotic-assisted PAE incurring a higher cost (group 1 $4530.2; group 2 $1588.5, p < 0.0001). Clinical improvement was significant in both arms at 3 months: group 1 mean change in AUA-SI of 8.3 (p = 0.006), group 2: 9.6 (p < 0.0001). No minor or major complications occurred.ConclusionsRobotic-assisted PAE offers technical success comparable to manual PAE, with similar clinical improvement with an increased cost.« less

Impact of environmental production conditions on productivity and efficiency: a case study of wheat farmers in Bangladesh.

PubMed

Rahman, Sanzidur; Hasan, M Kamrul

2008-09-01

Environmental conditions significantly affect production, but are often ignored in studies analysing productivity and efficiency leading to biased results. In this study, we examine the influence of selected environmental factors on productivity and efficiency in wheat farming in Bangladesh. Results reveal that environmental production conditions significantly affect the parameters of the production function and technical efficiency, as well as correlates of inefficiency. Controlling for environmental production conditions improves technical efficiency by 4 points (p<0.01) from 86% to 90%. Large farms are more efficient relative to small and medium sized farms (p<0.01 and 0.05), with no variation among regions. Policy implications include soil fertility improvement through soil conservation and crop rotation, improvement in managerial practices through extension services and adoption of modern technologies, promotion of education, strengthening the research-extension link, and development of new varieties that have higher yield potential and are also suitable for marginal areas.

Laparoscopic skills suffer on the first shift of sequential night shifts: program directors beware and residents prepare.

PubMed

Leff, Daniel R; Aggarwal, Rajesh; Rana, Mariam; Nakhjavani, Batool; Purkayastha, Sanjay; Khullar, Vik; Darzi, Ara W

2008-03-01

Research evaluating fatigue-induced skills decline has focused on acute sleep deprivation rather than the effects of circadian desynchronization associated with multiple shifts. As a result, the number of consecutive night shifts that residents can safely be on duty without detrimental effects to their technical skills remains unknown. A prospective observational cohort study was conducted to assess the impact of 7 successive night shifts on the technical surgical performance of junior residents. The interventional strategy included training 21 residents from surgery and allied disciplines on a virtual reality surgical simulator, towards the achievement of preset benchmark scores, followed by 294 technical skills assessments conducted over 1764 manpower night shift hours. Primary outcomes comprised serial technical skills assessments on 2 tasks of a virtual reality surgical simulator. Secondary outcomes included assessments of introspective fatigue, duration of sleep, and prospective recordings of activity (number of "calls" received, steps walked, and patients evaluated). Maximal deterioration in performance was observed following the first night shift. Residents took significantly longer to complete the first (P = 0.002) and second tasks (P = 0.005) compared with baseline. They also committed significantly greater numbers of errors (P = 0.025) on the first task assessed. Improved performance was observed across subsequent shifts towards baseline levels. Newly acquired technical surgical skills deteriorate maximally after the first night shift, emphasizing the importance of adequate preparation for night rotas. Performance improvements across successive shifts may be due to ongoing learning or adaptation to chronic fatigue. Further research should focus on assessments of both technical procedural skills and cognitive abilities to determine the rotas that best minimize errors and maximize patient safety.

Technical variations in low-input RNA-seq methodologies.

PubMed

Bhargava, Vipul; Head, Steven R; Ordoukhanian, Phillip; Mercola, Mark; Subramaniam, Shankar

2014-01-14

Recent advances in RNA-seq methodologies from limiting amounts of mRNA have facilitated the characterization of rare cell-types in various biological systems. So far, however, technical variations in these methods have not been adequately characterized, vis-à-vis sensitivity, starting with reduced levels of mRNA. Here, we generated sequencing libraries from limiting amounts of mRNA using three amplification-based methods, viz. Smart-seq, DP-seq and CEL-seq, and demonstrated significant technical variations in these libraries. Reduction in mRNA levels led to inefficient amplification of the majority of low to moderately expressed transcripts. Furthermore, noise in primer hybridization and/or enzyme incorporation was magnified during the amplification step resulting in significant distortions in fold changes of the transcripts. Consequently, the majority of the differentially expressed transcripts identified were either high-expressed and/or exhibited high fold changes. High technical variations ultimately masked subtle biological differences mandating the development of improved amplification-based strategies for quantitative transcriptomics from limiting amounts of mRNA.

Automatically inserted technical details improve radiology report accuracy.

PubMed

Abujudeh, Hani H; Govindan, Siddharth; Narin, Ozden; Johnson, Jamlik Omari; Thrall, James H; Rosenthal, Daniel I

2011-09-01

To assess the effect of automatically inserted technical details on the concordance of a radiology report header with the actual procedure performed. The study was IRB approved and informed consent was waived. We obtained radiology report audit data from the hospital's compliance office from the period of January 2005 through December 2009 spanning a total of 20 financial quarters. A "discordance percentage" was defined as the percentage of total studies in which a procedure code change was made during auditing. Using Chi-square analysis we compared discordance percentages between reports with manually inserted technical details (MITD) and automatically inserted technical details (AITD). The second quarter data of 2007 was not included in the analysis as the switch from MITD to AITD occurred during this quarter. The hospital's compliance office audited 9,110 studies from 2005-2009. Excluding the 564 studies in the second quarter of 2007, we analyzed a total of 8,546 studies, 3,948 with MITD and 4,598 with AITD. The discordance percentage in the MITD group was 3.95% (156/3,948, range per quarter, 1.5- 6.1%). The AITD discordance percentage was 1.37% (63/4,598, range per quarter, 0.0-2.6%). A Chi-square analysis determined a statistically significant difference between the 2 groups (P < 0.001). There was a statistically significant improvement in the concordance of a radiology report header with the performed procedure using automatically inserted technical details compared to manually inserted details. Copyright © 2011 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Outcomes of Technical Variant Liver Transplantation versus Whole Liver Transplantation for Pediatric Patients: A Meta-Analysis.

PubMed

Ye, Hui; Zhao, Qiang; Wang, Yufang; Wang, Dongping; Zheng, Zhouying; Schroder, Paul Michael; Lu, Yao; Kong, Yuan; Liang, Wenhua; Shang, Yushu; Guo, Zhiyong; He, Xiaoshun

2015-01-01

To overcome the shortage of appropriate-sized whole liver grafts for children, technical variant liver transplantation has been practiced for decades. We perform a meta-analysis to compare the survival rates and incidence of surgical complications between pediatric whole liver transplantation and technical variant liver transplantation. To identify relevant studies up to January 2014, we searched PubMed/Medline, Embase, and Cochrane library databases. The primary outcomes measured were patient and graft survival rates, and the secondary outcomes were the incidence of surgical complications. The outcomes were pooled using a fixed-effects model or random-effects model. The one-year, three-year, five-year patient survival rates and one-year, three-year graft survival rates were significantly higher in whole liver transplantation than technical variant liver transplantation (OR = 1.62, 1.90, 1.65, 1.78, and 1.62, respectively, p<0.05). There was no significant difference in five-year graft survival rate between the two groups (OR = 1.47, p = 0.10). The incidence of portal vein thrombosis and biliary complications were significantly lower in the whole liver transplantation group (OR = 0.45 and 0.42, both p<0.05). The incidence of hepatic artery thrombosis was comparable between the two groups (OR = 1.21, p = 0.61). Pediatric whole liver transplantation is associated with better outcomes than technical variant liver transplantation. Continuing efforts should be made to minimize surgical complications to improve the outcomes of technical variant liver transplantation.

The Technical Efficiency of Earthquake Medical Rapid Response Teams Following Disasters: The Case of the 2010 Yushu Earthquake in China.

PubMed

Liu, Xu; Tang, Bihan; Yang, Hongyang; Liu, Yuan; Xue, Chen; Zhang, Lulu

2015-12-04

Performance assessments of earthquake medical rapid response teams (EMRRTs), particularly the first responders deployed to the hardest hit areas following major earthquakes, should consider efficient and effective use of resources. This study assesses the daily technical efficiency of EMRRTs in the emergency period immediately following the 2010 Yushu earthquake in China. Data on EMRRTs were obtained from official daily reports of the general headquarters for Yushu earthquake relief, the emergency office of the National Ministry of Health, and the Health Department of Qinghai Province, for a sample of data on 15 EMRRTs over 62 days. Data envelopment analysis was used to examine the technical efficiency in a constant returns to scale model, a variable returns to scale model, and the scale efficiency of EMRRTs. Tobit regression was applied to analyze the effects of corresponding influencing factors. The average technical efficiency scores under constant returns to scale, variable returns to scale, and the scale efficiency scores of the 62 units of analysis were 77.95%, 89.00%, and 87.47%, respectively. The staff-to-bed ratio was significantly related to global technical efficiency. The date of rescue was significantly related to pure technical efficiency. The type of institution to which an EMRRT belonged and the staff-to-bed ratio were significantly related to scale efficiency. This study provides evidence that supports improvements to EMRRT efficiency and serves as a reference for earthquake emergency medical rapid assistance leaders and teams.

A Model of Cooperative Education--"Group Leader Training Program" for Industry Employees

ERIC Educational Resources Information Center

Arslan, Ridvan; Kus, Abdil; Mumcu, Haldun; Uzaslan, N. Tufan

2008-01-01

Studies on continuous education and alteration are highly significant in order to improve the technical and social abilities of the industry employees. Generally, these kinds of educational facilities are carried on in the range of in-house training. Besides in-house training, it is also possible to improve the abilities of the employees with the…

Testing the performance of technical trading rules in the Chinese markets based on superior predictive test

NASA Astrophysics Data System (ADS)

Wang, Shan; Jiang, Zhi-Qiang; Li, Sai-Ping; Zhou, Wei-Xing

2015-12-01

Technical trading rules have a long history of being used by practitioners in financial markets. The profitable ability and efficiency of technical trading rules are yet controversial. In this paper, we test the performance of more than seven thousand traditional technical trading rules on the Shanghai Securities Composite Index (SSCI) from May 21, 1992 through June 30, 2013 and China Securities Index 300 (CSI 300) from April 8, 2005 through June 30, 2013 to check whether an effective trading strategy could be found by using the performance measurements based on the return and Sharpe ratio. To correct for the influence of the data-snooping effect, we adopt the Superior Predictive Ability test to evaluate if there exists a trading rule that can significantly outperform the benchmark. The result shows that for SSCI, technical trading rules offer significant profitability, while for CSI 300, this ability is lost. We further partition the SSCI into two sub-series and find that the efficiency of technical trading in sub-series, which have exactly the same spanning period as that of CSI 300, is severely weakened. By testing the trading rules on both indexes with a five-year moving window, we find that during the financial bubble from 2005 to 2007, the effectiveness of technical trading rules is greatly improved. This is consistent with the predictive ability of technical trading rules which appears when the market is less efficient.

Synthesis of port related freight improvement studies : technical report.

DOT National Transportation Integrated Search

2012-10-01

"In this project, we propose to address carbon emissions in logistics through supply chain design, planning and : coordination. We argue that (1) supply chain design, planning, and coordination can help reduce carbon emissions : significantly, (2) su...

76 FR 50189 - Applications for New Awards; Technical Assistance and Dissemination To Improve Services and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-12

... most significant cognitive disabilities. Priority The purpose of this priority is to fund a cooperative... those with the most significant cognitive disabilities (the targeted students); (2) identify LEA and... disabilities. Psychology in the Schools, 47, 445-466. Bambara, L. M., Nonnemacher, S., & Kern, L. (2009...

The Candela and Photometric and Radiometric Measurements

PubMed Central

Parr, Albert C.

2001-01-01

The national measurement system for photometric and radiometric quantities is presently based upon techniques that make these quantities traceable to a high-accuracy cryogenic radiometer. The redefinition of the candela in 1979 provided the opportunity for national measurement laboratories to base their photometric measurements on optical detector technology rather than on the emission from high-temperature blackbody optical sources. The ensuing technical developments of the past 20 years, including the significant improvements in cryogenic radiometer performance, have provided the opportunity to place the fundamental maintenance of photometric quantities upon absolute detector based technology as was allowed by the 1979 redefinition. Additionally, the development of improved photodetectors has had a significant impact on the methodology in most of the radiometric measurement areas. This paper will review the status of the NIST implementation of the technical changes mandated by the 1979 redefinition of the candela and its effect upon the maintenance and dissemination of optical radiation measurements. PMID:27500020

Measuring and Benchmarking Technical Efficiency of Public Hospitals in Tianjin, China: A Bootstrap-Data Envelopment Analysis Approach.

PubMed

Li, Hao; Dong, Siping

2015-01-01

China has long been stuck in applying traditional data envelopment analysis (DEA) models to measure technical efficiency of public hospitals without bias correction of efficiency scores. In this article, we have introduced the Bootstrap-DEA approach from the international literature to analyze the technical efficiency of public hospitals in Tianjin (China) and tried to improve the application of this method for benchmarking and inter-organizational learning. It is found that the bias corrected efficiency scores of Bootstrap-DEA differ significantly from those of the traditional Banker, Charnes, and Cooper (BCC) model, which means that Chinese researchers need to update their DEA models for more scientific calculation of hospital efficiency scores. Our research has helped shorten the gap between China and the international world in relative efficiency measurement and improvement of hospitals. It is suggested that Bootstrap-DEA be widely applied into afterward research to measure relative efficiency and productivity of Chinese hospitals so as to better serve for efficiency improvement and related decision making. © The Author(s) 2015.

Initial assessment of strategic plans for improving the performance of veterinary services in developing countries: a review of OIE PVS gap analysis reports.

PubMed

Weaver, J; Leon, E; Edan, M; D'Alessio, F

2012-08-01

The World Organisation for Animal Health (OIE) carries out Gap Analysis missions (if a country so wishes) as part of its programme to assess and improve the Performance of Veterinary Services (the 'PVS Pathway') in Member Countries. These Gap Analysis missions have found that many national Veterinary Services comply to only a limited extent with the international standards established by the OIE and that their competence is compromised by poor governance. This failure threatens animal and public health not only nationally but also internationally. The OIE PVS Gap Analysis reports reviewed found that all the Veterinary Services have a strong vision and commitmentto improvement but are held back by a weak chain of command, inadequate and outdated legislation, insufficient funding, weak technical competencies, compromised technical independence, poor communications and limited joint programmes. There are weaknesses across all the core technical areas of trade, animal health, veterinary public health and veterinary laboratories and also in the overall management of the Veterinary Services. The OIE PVS Gap Analysis missions recommend significant increases in budget in all countries.

Examining the Highs and Lows of the Collaborative Relationship Between Technical Assistance Providers and Prevention Implementers.

PubMed

Chilenski, Sarah M; Welsh, Janet; Olson, Jonathan; Hoffman, Lesa; Perkins, Daniel F; Feinberg, Mark E

2018-02-01

The PROSPER model uses a three-tiered community partnership, university researcher, and Cooperative Extension-based technical assistance system to support the delivery of evidence-based interventions in communities. This study examines the trajectory and predictors of the collaborative relationship between technical assistance providers and community teams across the three phases of organization, implementation, and sustainability. Members of 14 PROmoting School-university-community Partnerships to Enhance Resilience (PROSPER) community teams and directors of local agencies rated communities' levels of readiness and adolescent substance use norms. Technical assistance providers rated their collaborative relationship with their teams at 14 occasions across 4.5 years. Results from mixed models show that levels of collaboration were stable until the sustainability phase, when they increased significantly. Team differences in change were significant during the implementation phase. Community readiness predicted levels of the collaborative relationship over time: high community readiness was associated with a high level of collaboration during organization, but a decline in collaboration during implementation. These results provide a more nuanced understanding of the relationship between technical assistance provision and community prevention teams and lead to recommendations to improve dissemination models to achieve a greater public health impact.

Evaluation of some technical factors affecting surgical outcome in photorefractive keratectomy with the VISX 2020 excimer laser

NASA Astrophysics Data System (ADS)

Maguen, Ezra I.; Salz, James J.; Papaioannou, Thanassis; Nesburn, Anthony B.

1995-05-01

Some technical factors relating to the use of the VISX model 20/20 excimer laser for photorefractive keratectomy will be discussed and the way they affect the final optical correction will be demonstrated, as follows: (1) Discontinuation of nitrogen flow: improved corneal haze but induced a mean undercorrection of 0.8 D, 18 months postoperatively. (2) Discontinuation of the use of the fixation ring did not affect centration in a statistically significant fashion. (3) Enlargement of the optical from 5.0 mm to 6.0 mm zone did not affect the refractive outcome. Visual acuity was improved in eyes which had PRK done with a 6.0 mm optical zone.

Bioelectronic retinal prosthesis

NASA Astrophysics Data System (ADS)

Weiland, James D.

2016-05-01

Retinal prosthesis have been translated to clinical use over the past two decades. Currently, two devices have regulatory approval for the treatment of retinitis pigmentosa and one device is in clinical trials for treatment of age-related macular degeneration. These devices provide partial sight restoration and patients use this improved vision in their everyday lives to navigate and to detect large objects. However, significant vision restoration will require both better technology and improved understanding of the interaction between electrical stimulation and the retina. In particular, current retinal prostheses do not provide peripheral visions due to technical and surgical limitations, thus limiting the effectiveness of the treatment. This paper reviews recent results from human implant patients and presents technical approaches for peripheral vision.

Surgeons' and trainees' perceived self-efficacy in operating theatre non-technical skills.

PubMed

Pena, G; Altree, M; Field, J; Thomas, M J W; Hewett, P; Babidge, W; Maddern, G J

2015-05-01

An important factor that may influence an individual's performance is self-efficacy, a personal judgement of capability to perform a particular task successfully. This prospective study explored newly qualified surgeons' and surgical trainees' self-efficacy in non-technical skills compared with their non-technical skills performance in simulated scenarios. Participants undertook surgical scenarios challenging non-technical skills in two simulation sessions 6 weeks apart. Some participants attended a non-technical skills workshop between sessions. Participants completed pretraining and post-training surveys about their perceived self-efficacy in non-technical skills, which were analysed and compared with their performance in surgical scenarios in two simulation sessions. Change in performance between sessions was compared with any change in participants' perceived self-efficacy. There were 40 participants in all, 17 of whom attended the non-technical skills workshop. There was no significant difference in participants' self-efficacy regarding non-technical skills from the pretraining to the post-training survey. However, there was a tendency for participants with the highest reported self-efficacy to adjust their score downwards after training and for participants with the lowest self-efficacy to adjust their score upwards. Although there was significant improvement in non-technical skills performance from the first to second simulation sessions, a correlation between participants' self-efficacy and performance in scenarios in any of the comparisons was not found. The results suggest that new surgeons and surgical trainees have poor insight into their non-technical skills. Although it was not possible to correlate participants' self-belief in their abilities directly with their performance in a simulation, in general they became more critical in appraisal of their abilities as a result of the intervention. © 2015 BJS Society Ltd Published by John Wiley & Sons Ltd.

Improving technical information use: what can be learnt from a manager's perspective?

PubMed

Jacobson, C; Lisle, A; Carter, R W; Hockings, M T

2013-07-01

Conservation practice reportedly suffers from low use of technical information. Understanding of factors that affect the influence of technical information on management decision-making is limited. We sought to identify leverage points for improved technical information dissemination in the New South Wales Parks and Wildlife Service, Australia, given the significant recent investments in monitoring and evaluation that had been made. We did so by exploring the inter-relationships between factors affecting the influence of different information types on management decisions. Results indicate that managers have a high inclination toward adaptive behavior, given they operate in an information poor environment. The most influential types of information were those that enabled interaction between information provider and recipient (e.g., staff experience and expertise). An analysis of the concordance in individuals' responses for different information types showed that neither accessibility nor organizational expectation of use was aligned with influence on decision-making. Alignment of responses also varied by work area. Raising expectations of information use or increasing access to particular types of information is therefore unlikely to result in an increase in influence on management decision-making. Rather than focussing on matching accessibility and expected use of particular information types, our results indicate that technical information uptake is best supported through existing peer networks tailored to specific work areas.

Ultrasound-Guided Radiofrequency Ablation Using a New Electrode with an Electromagnetic Position Sensor for Hepatic Tumors Difficult to Place an Electrode: A Preliminary Clinical Study.

PubMed

Kang, Tae Wook; Lee, Min Woo; Song, Kyoung Doo; Rhim, Hyunchul; Lim, Hyo Keun; Kang, Wonseok; Kim, Kyunga

2017-12-01

To evaluate whether a new electrode embedded with an electromagnetic position sensor (EMPS) improves the technical feasibility of percutaneous radiofrequency ablation (RFA) in patients with hepatic tumors difficult to place an electrode under ultrasonography (US) guidance and to assess short-term therapeutic efficacy and safety. This prospective study was approved by the institutional review board, and written informed consent was obtained from all patients. Between January 2015 and December 2016, 10 patients (7 men and 3 women; age range 52-75 years) with a single hepatic tumor (median 1.4 cm; range 1.1-1.8 cm) difficult to place an electrode under US guidance were enrolled. The technical feasibility of targeting and overlapping ablation during the RFA procedure was graded using a four-point scale and analyzed using the Wilcoxon signed rank test according to the use of EMPS. In addition, the rates of technical success, local tumor progression (LTP), and major complications were assessed. The use of the new RF electrode with EMPS significantly improved the technical feasibility of targeting and overlapping ablation (p = 0.002 and p = 0.003, respectively). After treatment, the technical success rate was 100%. LTP was not found in any patient during the follow-up period (median 8 months; range 4-22 months). No major procedure-related complications occurred. The technical feasibility of percutaneous RFA improves with the use of this RF electrode embedded with an EMPS. Short-term therapeutic efficacy and safety after RFA using the electrode were promising in patients with hepatic tumors difficult to place an electrode under US guidance.

The Changing Nature of Technical Assistance.

ERIC Educational Resources Information Center

Noggle, Nelson L.

The changing nature of technical assistance activities and evaluation for compensatory education programs was discussed. The emphasis is on the Education Consolidation and Improvement Act (ECIA) Chapter 1 Technical Assistance Centers (TAC) and their clients. Improvement of school practices demands that the technical assistance process be developed…

Simulation-based training delivered directly to the pediatric cardiac intensive care unit engenders preparedness, comfort, and decreased anxiety among multidisciplinary resuscitation teams.

PubMed

Allan, Catherine K; Thiagarajan, Ravi R; Beke, Dorothy; Imprescia, Annette; Kappus, Liana J; Garden, Alexander; Hayes, Gavin; Laussen, Peter C; Bacha, Emile; Weinstock, Peter H

2010-09-01

Resuscitation of pediatric cardiac patients involves unique and complex physiology, requiring multidisciplinary collaboration and teamwork. To optimize team performance, we created a multidisciplinary Crisis Resource Management training course that addressed both teamwork and technical skill needs for the pediatric cardiac intensive care unit. We sought to determine whether participation improved caregiver comfort and confidence levels regarding future resuscitation events. We developed a simulation-based, in situ Crisis Resource Management curriculum using pediatric cardiac intensive care unit scenarios and unit-specific resuscitation equipment, including an extracorporeal membrane oxygenation circuit. Participants replicated the composition of a clinical team. Extensive video-based debriefing followed each scenario, focusing on teamwork principles and technical resuscitation skills. Pre- and postparticipation questionnaires were used to determine the effects on participants' comfort and confidence regarding participation in future resuscitations. A total of 182 providers (127 nurses, 50 physicians, 2 respiratory therapists, 3 nurse practitioners) participated in the course. All participants scored the usefulness of the program and scenarios as 4 of 5 or higher (5 = most useful). There was significant improvement in participants' perceived ability to function as a code team member and confidence in a code (P < .001). Participants reported they were significantly more likely to raise concerns about inappropriate management to the code leader (P < .001). We developed a Crisis Resource Management training program in a pediatric cardiac intensive care unit to teach technical resuscitation skills and improve team function. Participants found the experience useful and reported improved ability to function in a code. Further work is needed to determine whether participation in the Crisis Resource Management program objectively improves team function during real resuscitations. 2010 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

The learning effect of intraoperative video-enhanced surgical procedure training.

PubMed

van Det, M J; Meijerink, W J H J; Hoff, C; Middel, L J; Koopal, S A; Pierie, J P E N

2011-07-01

The transition from basic skills training in a skills lab to procedure training in the operating theater using the traditional master-apprentice model (MAM) lacks uniformity and efficiency. When the supervising surgeon performs parts of a procedure, training opportunities are lost. To minimize this intervention by the supervisor and maximize the actual operating time for the trainee, we created a new training method called INtraoperative Video-Enhanced Surgical Training (INVEST). Ten surgical residents were trained in laparoscopic cholecystectomy either by the MAM or with INVEST. Each trainee performed six cholecystectomies that were objectively evaluated on an Objective Structured Assessment of Technical Skills (OSATS) global rating scale. Absolute and relative improvements during the training curriculum were compared between the groups. A questionnaire evaluated the trainee's opinion on this new training method. Skill improvement on the OSATS global rating scale was significantly greater for the trainees in the INVEST curriculum compared to the MAM, with mean absolute improvement 32.6 versus 14.0 points and mean relative improvement 59.1 versus 34.6% (P=0.02). INVEST significantly enhances technical and procedural skill development during the early learning curve for laparoscopic cholecystectomy. Trainees were positive about the content and the idea of the curriculum.

Advancing Commercialization of Algal Biofuel through Increased Biomass Productivity and Technical Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anton, David

The proposed project built on the foundation of over several years years of intensive and ground-breaking R&D work at Cellana's Kona Demonstration Facility (KDF). Phycological and engineering solutions were provided to tackle key cultivation issues and technical barriers limiting algal biomass productivity identified through work conducted outdoors at industrial (1 acre) scale. The objectives of this project were to significantly improve algal biomass productivity and reduce operational cost in a seawater-based system, using results obtained from two top-performing algal strains as the baseline while technically advancing and more importantly, integrating the various unit operations involved in algal biomass production, processing,more » and refining.« less

The Stanford Microsurgery and Resident Training (SMaRT) Scale: validation of an on-line global rating scale for technical assessment.

PubMed

Satterwhite, Thomas; Son, Ji; Carey, Joseph; Echo, Anthony; Spurling, Terry; Paro, John; Gurtner, Geoffrey; Chang, James; Lee, Gordon K

2014-05-01

We previously reported results of our on-line microsurgery training program, showing that residents who had access to our website significantly improved their cognitive and technical skills. In this study, we report an objective means for expert evaluators to reliably rate trainees' technical skills under the microscope, with the use of our novel global rating scale. "Microsurgery Essentials" (http://smartmicrosurgery.com) is our on-line training curriculum. Residents were randomly divided into 2 groups: 1 group reviewed this online resource and the other did not. Pre- and post-tests consisted of videotaped microsurgical sessions in which the trainee performed "microsurgery" on 3 different models: latex glove, penrose drain, and the dorsal vessel of a chicken foot. The SMaRT (Stanford Microsurgery and Resident Training) scale, consisting of 9 categories graded on a 5-point Likert scale, was used to assess the trainees. Results were analyzed with ANOVA and Student t test, with P less than 0.05 indicating statistical significance. Seventeen residents participated in the study. The SMaRT scale adequately differentiated the performance of more experienced senior residents (PGY-4 to PGY-6, total average score=3.43) from less experienced junior residents (PGY-1 to PGY-3, total average score=2.10, P<0.0001). Residents who viewed themselves as being confident received a higher score on the SMaRT scale (average score 3.5), compared to residents who were not as confident (average score 2.1) (P<0.001). There were no significant differences in scoring among all 3 evaluators (P>0.05). Additionally, junior residents who had access to our website showed a significant increase in their graded technical performance by 0.7 points when compared to residents who did not have access to the website who showed an improvement of only 0.2 points (P=0.01). Our SMaRT scale is valid and reliable in assessing the microsurgical skills of residents and other trainees. Current trainees are more likely to use self-directed on-line education because of its easy accessibility and interactive format. Our global rating scale can help ensure residents are achieving appropriate technical milestones.

Developing a neurosurgical simulation-based educational curriculum: an overview.

PubMed

Harrop, James; Lobel, Darlene A; Bendok, Bernard; Sharan, Ashwini; Rezai, Ali R

2013-10-01

The science of medicine has undergone rapid advancement and expansion as a result of significant technological innovations, and this has affected the training of neurosurgical residents. To develop a simulation-based neurosurgical educational curriculum to improve resident education. The Congress of Neurological Surgeons established a Simulation Committee to explore the use of this technology in maximizing neurosurgical education. Simulators were incorporated into an educational curriculum with both a didactic and a technical component. The simulators and didactic portions were validated with objective pretests and posttests. The Simulator Committee has continued to expand the use of simulators in neurosurgical education and has organized several practical courses. The simulator use continues to expand into vasculature, spinal, and cranial modules. Each module has independently shown improved training scores in both didactic and technical skills. The Congress of Neurological Surgeons has successfully incorporated simulation into an educational curriculum with both didactic and technical components. This appears to be a powerful educational tool, and its uses are being further expanded.

3D-printed tracheoesophageal puncture and prosthesis placement simulator.

PubMed

Barber, Samuel R; Kozin, Elliott D; Naunheim, Matthew R; Sethi, Rosh; Remenschneider, Aaron K; Deschler, Daniel G

A tracheoesophageal prosthesis (TEP) allows for speech after total laryngectomy. However, TEP placement is technically challenging, requiring a coordinated series of steps. Surgical simulators improve technical skills and reduce operative time. We hypothesize that a reusable 3-dimensional (3D)-printed TEP simulator will facilitate comprehension and rehearsal prior to actual procedures. The simulator was designed using Fusion360 (Autodesk, San Rafael, CA). Components were 3D-printed in-house using an Ultimaker 2+ (Ultimaker, Netherlands). Squid simulated the common tracheoesophageal wall. A Blom-Singer TEP (InHealth Technologies, Carpinteria, CA) replicated placement. Subjects watched an instructional video and completed pre- and post-simulation surveys. The simulator comprised 3D-printed parts: the esophageal lumen and superficial stoma. Squid was placed between components. Ten trainees participated. Significant differences existed between junior and senior residents with surveys regarding anatomy knowledge(p<0.05), technical details(p<0.01), and equipment setup(p<0.01). Subjects agreed that simulation felt accurate, and rehearsal raised confidence in future procedures. A 3D-printed TEP simulator is feasible for surgical training. Simulation involving multiple steps may accelerate technical skills and improve education. Copyright © 2017 Elsevier Inc. All rights reserved.

Matching Community and Technical College Professional/Technical Education Capacity to Employer Demand. Final Report.

ERIC Educational Resources Information Center

Sommers, Paul; Heg, Deena

A project was conducted to improve the state of Washington's community and technical college system by developing and using an improved occupational forecasting system to assess and respond to education and training needs. First, long-term occupational forecast data from Washington's Employment Security Department were matched with technical and…

How to Improve the Design and Delivery of High-Quality Technical Assistance. Newsletter

ERIC Educational Resources Information Center

Center for Comprehensive School Reform and Improvement, 2005

2005-01-01

Educators often use the term technical assistance to define services delivered or received in the pursuit of school- and district-improvement initiatives. More specifically, technical assistance can be defined as any assistance that identifies, selects, or designs research-based solutions and practices to support school improvement (Mattson &…

Simulation-based team training improved the self-assessed ability of physicians, nurses and midwives to perform neonatal resuscitation.

PubMed

Malmström, B; Nohlert, E; Ewald, U; Widarsson, M

2017-08-01

The use of simulation-based team training in neonatal resuscitation has increased in Sweden during the last decade, but no formal evaluation of this training method has been performed. This study evaluated the effect of simulation-based team training on the self-assessed ability of personnel to perform neonatal resuscitation. We evaluated a full-day simulation-based team training course in neonatal resuscitation, by administering a questionnaire to 110 physicians, nurses and midwives before and after the training period. The questionnaire focused on four important domains: communication, leadership, confidence and technical skills. The study was carried out in Sweden from 2005 to 2007. The response rate was 84%. Improvements in the participants' self-assessed ability to perform neonatal resuscitation were seen in all four domains after training (p < 0.001). Professionally inexperienced personnel showed a significant improvement in the technical skills domain compared to experienced personnel (p = 0.001). No differences were seen between professions or time since training in any of the four domains. Personnel with less previous experience with neonatal resuscitation showed improved confidence (p = 0.007) and technical skills (p = 0.003). A full-day course on simulation-based team training with video-supported debriefing improved the participants' self-assessed ability to perform neonatal resuscitation. ©2017 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

The Basic Surgical Skills Course in Sub-Saharan Africa: An Observational Study of Effectiveness.

PubMed

Fergusson, Stuart J; Sedgwick, David M; Ntakiyiruta, Georges; Ntirenganya, Faustin

2018-04-01

The Basic Surgical Skills (BSS) course is a common component of postgraduate surgical training programmes in sub-Saharan Africa, but was originally designed in a UK context, and its efficacy and relevance have not been formally assessed in Africa. An observational study was carried out during a BSS course delivered to early-stage surgical trainees from Rwanda and the Democratic Republic of the Congo. Technical skill in a basic wound closure task was assessed in a formal Objective Structured Assessment of Technical Skills (OSAT) before and after course completion. Participants completed a pre-course questionnaire documenting existing surgical experience and self-perceived confidence levels in surgical skills which were to be taught during the course. Participants repeated confidence ratings and completed course evaluation following course delivery. A cohort of 17 participants had completed a pre-course median of 150 Caesarean sections as primary operator. Performance on the OSAT improved from a mean of 10.5/17 pre-course to 14.2/17 post-course (mean of paired differences 3.7, p < 0.001). Improvements were seen in 15/17 components of wound closure. Pre-course, only 47% of candidates were forming hand-tied knots correctly and 38% were appropriately crossing hands with each throw, improving to 88 and 76%, respectively, following the course (p = 0.01 for both components). Confidence levels improved significantly in all technical skills taught, and the course was assessed as highly relevant by trainees. The Basic Surgical Skills course is effective in improving the basic surgical technique of surgical trainees from sub-Saharan Africa and their confidence in key technical skills.

Super Bowl Surveillance: Facing Up to Biometrics

DTIC Science & Technology

2001-05-01

Biometric facial recognition can provide significant benefits to society. At the same time, the rapid growth and improvement in the technology could...using facial recognition where it can produce positive benefits. Biometric facial recognition is by no means a perfect technology, and much technical

Application of Solidification Theory to Rapid Solidification Processing

DTIC Science & Technology

1982-09-01

period were achieved in the following areas : Extended Solid Solubilities -- for Produetion of Alloys with New Compositions and Phases o At high growth... Areas where significant improvements In alloy properties can be produced by rapid solidification will be emphasized. Technical Problem and General...focussed on the science underlying areas where Improved materials can be obtained in order to provide such prediction and control. This work is both

Do communication training programs improve students' communication skills?--a follow-up study.

PubMed

Simmenroth-Nayda, Anne; Weiss, Cora; Fischer, Thomas; Himmel, Wolfgang

2012-09-05

Although it is taken for granted that history-taking and communication skills are learnable, this learning process should be confirmed by rigorous studies, such as randomized pre- and post-comparisons. The purpose of this paper is to analyse whether a communication course measurably improves the communicative competence of third-year medical students at a German medical school and whether technical or emotional aspects of communication changed differently. A sample of 32 randomly selected students performed an interview with a simulated patient before the communication course (pre-intervention) and a second interview after the course (post-intervention), using the Calgary-Cambridge Observation Guide (CCOG) to assess history taking ability. On average, the students improved in all of the 28 items of the CCOG. The 6 more technically-orientated communication items improved on average from 3.4 for the first interview to 2.6 in the second interview (p < 0.0001), the 6 emotional items from 2.7 to 2.3 (p = 0.023). The overall score for women improved from 3.2 to 2.5 (p = 0.0019); male students improved from 3.0 to 2.7 (n.s.). The mean interview time significantly increased from the first to the second interview, but the increase in the interview duration and the change of the overall score for the students' communication skills were not correlated (Pearson's r = 0.03; n.s.). Our communication course measurably improved communication skills, especially for female students. These improvements did not depend predominantly on an extension of the interview time. Obviously, "technical" aspects of communication can be taught better than "emotional" communication skills.

Where the lay and the technical meet: Using an anthropology of interfaces to explain persistent reproductive health disparities in West Africa.

PubMed

Jaffré, Yannick; Suh, Siri

2016-05-01

Despite impressive global investment in reproductive health programs in West Africa, maternal mortality remains unacceptably high and obstetric care is often inadequate. Fertility is among the highest in the world, while contraceptive prevalence remains among the lowest. This paper explores the social and technical dimensions of this situation. We argue that effective reproductive health programs require analyzing the interfaces between technical programs and the social logics and behaviors of health professionals and client populations. Significant gaps between health programs' goals and the behaviors of patients and health care professionals have been observed. While public health projects aim to manage reproduction, sexuality, fertility, and professional practices are regulated socially. Such projects may target technical practices, but access to care is greatly influenced by social norms and ethics. This paper shows how an empirical anthropology that investigates the social and technical interfaces of reproduction can contribute to improved global health. Copyright © 2016 Elsevier Ltd. All rights reserved.

A systematic review of evidence for education and training interventions in microsurgery.

PubMed

Ghanem, Ali M; Hachach-Haram, Nadine; Leung, Clement Chi Ming; Myers, Simon Richard

2013-07-01

Over the past decade, driven by advances in educational theory and pressures for efficiency in the clinical environment, there has been a shift in surgical education and training towards enhanced simulation training. Microsurgery is a technical skill with a steep competency learning curve on which the clinical outcome greatly depends. This paper investigates the evidence for educational and training interventions of traditional microsurgical skills courses in order to establish the best evidence practice in education and training and curriculum design. A systematic review of MEDLINE, EMBASE, and PubMed databases was performed to identify randomized control trials looking at educational and training interventions that objectively improved microsurgical skill acquisition, and these were critically appraised using the BestBETs group methodology. The databases search yielded 1,148, 1,460, and 2,277 citations respectively. These were then further limited to randomized controlled trials from which abstract reviews reduced the number to 5 relevant randomised controlled clinical trials. The best evidence supported a laboratory based low fidelity model microsurgical skills curriculum. There was strong evidence that technical skills acquired on low fidelity models transfers to improved performance on higher fidelity human cadaver models and that self directed practice leads to improved technical performance. Although there is significant paucity in the literature to support current microsurgical education and training practices, simulated training on low fidelity models in microsurgery is an effective intervention that leads to acquisition of transferable skills and improved technical performance. Further research to identify educational interventions associated with accelerated skill acquisition is required.

Systems integration studies for supersonic cruise aircraft

NASA Technical Reports Server (NTRS)

Mascitti, V. R.

1975-01-01

Technical progress in each of the disciplinary research areas affecting the design of supersonic cruise aircraft is discussed. The NASA AST/SCAR Program supported the integration of these technical advances into supersonic cruise aircraft configuration concepts. While the baseline concepts reflect differing design philosophy, all reflect a level of economic performance considerably above the current foreign aircraft as well as the former U.S. SST. Range-payload characteristics of the study configurating show significant improvement, while meeting environmental goals such as takeoff and landing noise and upper atmospheric pollution.

Technical interventions to increase adenoma detection rate in colonoscopy.

PubMed

Rondonotti, Emanuele; Andrealli, Alida; Amato, Arnaldo; Paggi, Silvia; Conti, Clara Benedetta; Spinzi, Giancarlo; Radaelli, Franco

2016-12-01

Adenoma detection rate (ADR) is the most robust colonoscopy quality metric and clinical studies have adopted it as the ideal method to assess the impact of technical interventions. Areas covered: We reviewed papers focusing on the impact of colonoscopy technical issues on ADR, including withdrawal time and technique, second evaluation of the right colon, patient positional changes, gastrointestinal assistant participation during colonoscopy, water-aided technique, optimization of bowel preparation and antispasmodic administration. Expert commentary: Overall, technical interventions are inexpensive, available worldwide and easy to implement. Some of them, such as the adoption of split dose regimen and slow scope withdrawal to allow a careful inspection, have been demonstrated to significantly improve ADR. Emerging data support the use of water-exchange colonoscopy. According to published studies, other technical interventions seem to provide only marginal benefit to ADR. Unfortunately, the available evidence has methodological limitations, such as small sample sizes, the inclusion of expert endoscopists only and the evaluation of single technical interventions. Additionally, larger studies are needed to clarify whether these interventions might have a higher benefit on low adenoma detectors and whether the implementation of a bundle of them, instead of a single technical maneuver, might have a greater impact on ADR.

Final priority; technical assistance to improve state data capacity--National Technical Assistance Center to improve state capacity to accurately collect and report IDEA data. Final priority.

PubMed

2013-05-20

The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Technical Assistance to Improve State Data Capacity program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2013 and later years. We take this action to focus attention on an identified national need to provide technical assistance (TA) to States to improve their capacity to meet the data collection and reporting requirements of the Individuals with Disabilities Education Act (IDEA). We intend this priority to establish a TA center to improve State capacity to accurately collect and report IDEA data (Data Center).

Improvements in pandemic preparedness in 8 Central American countries, 2008 - 2012

PubMed Central

2014-01-01

Background In view of ongoing pandemic threats such as the recent human cases of novel avian influenza A(H7N9) in China, it is important that all countries continue their preparedness efforts. Since 2006, Central American countries have received donor funding and technical assistance from the U.S. Centers for Disease Control and Prevention (CDC) to build and improve their capacity for influenza surveillance and pandemic preparedness. Our objective was to measure changes in pandemic preparedness in this region, and explore factors associated with these changes, using evaluations conducted between 2008 and 2012. Methods Eight Central American countries scored their pandemic preparedness across 12 capabilities in 2008, 2010 and 2012, using a standardized tool developed by CDC. Scores were calculated by country and capability and compared between evaluation years using the Student’s t-test and Wilcoxon Rank Sum test, respectively. Virological data reported to WHO were used to assess changes in testing capacity between evaluation years. Linear regression was used to examine associations between scores, donor funding, technical assistance and WHO reporting. Results All countries improved their pandemic preparedness between 2008 and 2012 and seven made statistically significant gains (p < 0.05). Increases in median scores were observed for all 12 capabilities over the same period and were statistically significant for eight of these (p < 0.05): country planning, communications, routine influenza surveillance, national respiratory disease surveillance, outbreak response, resources for containment, community interventions and health sector response. We found a positive association between preparedness scores and cumulative funding between 2006 and 2011 (R2 = 0.5, p < 0.01). The number of specimens reported to WHO from participating countries increased significantly from 5,551 (2008) to 18,172 (2012) (p < 0.01). Conclusions Central America has made significant improvements in influenza pandemic preparedness between 2008 and 2012. U.S. donor funding and technical assistance provided to the region is likely to have contributed to the improvements we observed, although information on other sources of funding and support was unavailable to study. Gains are also likely the result of countries’ response to the 2009 influenza pandemic. Further research is required to determine the degree to which pandemic improvements are sustainable. PMID:24886275

Lunar mission safety and rescue: Technical summary

NASA Technical Reports Server (NTRS)

1971-01-01

A technical summary is presented of the escape/rescue and the hazards analyses for manned missions and operations in the 1980 time frame. Hazards are interpreted as hazards to man, not to equipment, program schedule, or program objectives. Hazards in 39 individual areas are analyzed, and corrective measures are recommended. Over 200 safety guidelines are proposed, based on significant hazards. Escape and rescue situtations and requirements are identified and analyzed, and escape/survival/rescue concepts are defined to cope with each escape/rescue situation. Areas in which research or technical development efforts could improve mission safety are identified. It is concluded that the primary emphasis should be on survival and escape provisions, with rescue required only where self-help cannot bring the endangered crewmen to a safe haven.

Materials education activities

NASA Technical Reports Server (NTRS)

Ries, Heidi R.; Harris, Jonice; Leake, Woodrow W.; Bunnell, L. Roy; Berrettini, Robert

1993-01-01

Last year, at NEW: Update '91, a panel discussion was held to address the unique difficulties of attracting and retaining minorities and women in technical studies. Unfortunately, retention in technical majors is a problem of varying proportions for the entire student population, and must be improved in order to maintain the strength of the nation's industrial base. To investigate the cause of student attrition in technical majors, in-depth interviews of both current and former (non-graduating) engineering students at four colleges and universities in Colorado were conducted by Hewitt and Seymour. They found that there was no significant difference in the level of high school preparation and undergraduate academic performance in these two groups, despite the prevailing faculty perception that most students who switch from technical to nontechnical majors were underprepared. The majority of engineering students who changed majors reported that they were turned off by science, while one-third complained of poor teaching.

Technical knowledge and skills development in the informal sector in Kenya: The case of custom tailors

NASA Astrophysics Data System (ADS)

Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

2017-06-01

Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of technical skills and knowledge which tailoring apprentices develop, and the factors which influence these outcomes. The findings show that apprentices do acquire basic technical skills for immediate application to ongoing tailoring activities (such as how to take body measurements, draft patterns, and cut, sew and finish constructed garments). However, apprentices do not acquire the technical knowledge that underpins the trade. Most master tailors who have completed TAs lack technical knowledge and have no access to technical skills upgrading. This perpetuates the cycle of basic and limited technical skills transfer to apprentices, poor performance and poverty among tailors. Both apprentices and master tailors expressed concern over knowledge limitations in TAs and a need to access further training to improve skills and acquire knowledge of the trade. The authors of this article argue that, technically and pedagogically, skilled master tailors are critical to improving training quality. Complementary training in theoretical knowledge is also important in improving apprentices' technical skills and understanding of the trade. Inclusion of TAs in government policy may help ensure sustainable improvement of skills.

Cognitive training for technical and non-technical skills in robotic surgery: a randomised controlled trial.

PubMed

Raison, Nicholas; Ahmed, Kamran; Abe, Takashige; Brunckhorst, Oliver; Novara, Giacomo; Buffi, Nicolò; McIlhenny, Craig; van der Poel, Henk; van Hemelrijck, Mieke; Gavazzi, Andrea; Dasgupta, Prokar

2018-05-07

To investigate the effectiveness of motor imagery (MI) for technical skill and non-technical skill (NTS) training in minimally invasive surgery (MIS). A single-blind, parallel-group randomised controlled trial was conducted at the Vattikuti Institute of Robotic Surgery, King's College London. Novice surgeons were recruited by open invitation in 2015. After basic robotic skills training, participants underwent simple randomisation to either MI training or standard training. All participants completed a robotic urethrovesical anastomosis task within a simulated operating room. In addition to the technical task, participants were required to manage three scripted NTS scenarios. Assessment was performed by five blinded expert surgeons and a NTS expert using validated tools for evaluating technical skills [Global Evaluative Assessment of Robotic Skills (GEARS)] and NTS [Non-Technical Skills for Surgeons (NOTSS)]. Quality of MI was assessed using a revised Movement Imagery Questionnaire (MIQ). In all, 33 participants underwent MI training and 29 underwent standard training. Interrater reliability was high, Krippendorff's α = 0.85. After MI training, the mean (sd) GEARS score was significantly higher than after standard training, at 13.1 (3.25) vs 11.4 (2.97) (P = 0.03). There was no difference in mean NOTSS scores, at 25.8 vs 26.4 (P = 0.77). MI training was successful with significantly higher imagery scores than standard training (mean MIQ score 5.1 vs 4.5, P = 0.04). Motor imagery is an effective training tool for improving technical skill in MIS even in novice participants. No beneficial effect for NTS was found. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

Observation of behavioural markers of non-technical skills in the operating room and their relationship to intra-operative incidents.

PubMed

Siu, Joey; Maran, Nikki; Paterson-Brown, Simon

2016-06-01

The importance of non-technical skills in improving surgical safety and performance is now well recognised. Better understanding is needed of the impact that non-technical skills of the multi-disciplinary theatre team have on intra-operative incidents in the operating room (OR) using structured theatre-based assessment. The interaction of non-technical skills that influence surgical safety of the OR team will be explored and made more transparent. Between May-August 2013, a range of procedures in general and vascular surgery in the Royal Infirmary of Edinburgh were performed. Non-technical skills behavioural markers and associated intra-operative incidents were recorded using established behavioural marking systems (NOTSS, ANTS and SPLINTS). Adherence to the surgical safety checklist was also observed. A total of 51 procedures were observed, with 90 recorded incidents - 57 of which were considered avoidable. Poor situational awareness was a common area for surgeons and anaesthetists leading to most intra-operative incidents. Poor communication and teamwork across the whole OR team had a generally large impact on intra-operative incidents. Leadership was shown to be an essential set of skills for the surgeons as demonstrated by the high correlation of poor leadership with intra-operative incidents. Team-working and management skills appeared to be especially important for anaesthetists in the recovery from an intra-operative incident. A significant number of avoidable incidents occur during operative procedures. These can all be linked to failures in non-technical skills. Better training of both individual and team in non-technical skills is needed in order to improve patient safety in the operating room. Copyright © 2014 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Cricothyroidotomy In Situ Simulation Curriculum (CRIC Study): Training Residents for Rare Procedures.

PubMed

Petrosoniak, Andrew; Ryzynski, Agnes; Lebovic, Gerald; Woolfrey, Karen

2017-04-01

Technical skill acquisition for rare procedures can be challenging given the few real-life training opportunities. In situ simulation (ISS), a training technique that takes place in the actual workplace, is a promising method to promote environmental fidelity for rare procedures. This study evaluated a simulation-based technical skill curriculum for cricothyroidotomy using deliberate practice, followed by an ISS evaluation session. Twenty emergency medicine residents participated in a two-part curriculum to improve cricothryoidotomy performance. A pretest established participant baseline technical skill. The training session consisted of two parts, didactic teaching followed by deliberate practice using a task-training manikin. A posttest consisted of an unannounced, high-fidelity ISS, during an emergency department shift. The primary outcome was the mean performance time between the pretest and posttest sessions. Skill performance was also evaluated using a checklist scale and global rating scale. Cricothyroidotomy performance time improved significantly from pretest to posttest sessions (mean difference, 59 seconds; P < 0.0001). Both checklist and global rating scales improved significantly from the pretest to the posttest with a mean difference of 1.82 (P = 0.002) and 6.87 (P = 0.0025), respectively. Postcourse survey responses were favorable for both the overall curriculum experience and the unannounced ISS. This pilot study demonstrated that unannounced ISS is feasible and can be used to effectively measure cricothyroidotomy performance among EM residents. After a two-part training session consisting of didactic learning and deliberate practice, improved cricothyroidotomy skill performance was observed during an unannounced ISS in the emergency department. The integration of ISS in cricothyroidotomy training represents a promising approach; however, further study is needed to establish its role.

Technical and scale efficiency in the delivery of child health services in Zambia: results from data envelopment analysis

PubMed Central

Achoki, Tom; Hovels, Anke; Masiye, Felix; Lesego, Abaleng; Leufkens, Hubert; Kinfu, Yohannes

2017-01-01

Objective Despite tremendous efforts to scale up key maternal and child health interventions in Zambia, progress has not been uniform across the country. This raises fundamental health system performance questions that require further investigation. Our study investigates technical and scale efficiency (SE) in the delivery of maternal and child health services in the country. Setting The study focused on all 72 health districts of Zambia. Methods We compiled a district-level database comprising health outcomes (measured by the probability of survival to 5 years of age), health outputs (measured by coverage of key health interventions) and a set of health system inputs, namely, financial resources and human resources for health, for the year 2010. We used data envelopment analysis to assess the performance of subnational units across Zambia with respect to technical and SE, controlling for environmental factors that are beyond the control of health system decision makers. Results Nationally, average technical efficiency with respect to improving child survival was 61.5% (95% CI 58.2% to 64.8%), which suggests that there is a huge inefficiency in resource use in the country and the potential to expand services without injecting additional resources into the system. Districts that were more urbanised and had a higher proportion of educated women were more technically efficient. Improved cooking methods and donor funding had no significant effect on efficiency. Conclusions With the pressing need to accelerate progress in population health, decision makers must seek efficient ways to deliver services to achieve universal health coverage. Understanding the factors that drive performance and seeking ways to enhance efficiency offer a practical pathway through which low-income countries could improve population health without necessarily seeking additional resources. PMID:28057650

Avoidable Technical and Clinical Denial Write-Off Management in Hospitals, Physician Offices, and Clinics.

PubMed

Terra, Sandra Marlene; Byrne, Amanda

2016-01-01

This article reviews the various types of technical and clinical denials that are usually "written off" and proposes strategies to prevent this loss. For purposes of this writing, avoidable technical and clinical denial write-offs are defined as revenue lost from "first-pass" denials rejections. For example, a procedure that requires an authorization is performed without having had an authorization obtained. After appeals and attempts to recoup the revenue, often unsuccessful, the organization ultimately "writes off" the revenue as not collectable. The question to ask is: Are these claims really not collectable or can actionable steps be taken to conserve these dollars and improve the bottom line? Acute care hospitals, physician offices, and clinics. In today's environment, the need to manage costs is ubiquitous. Cost management is on the priority list of all savvy health care executives, even if margins are healthy, revenue is under pressure, and the magnitude of cost reduction needed is greater than what past efforts have achieved. As hospitals and physician clinics prioritize areas for improvement, reduction in lost revenue-especially avoidable lost revenue-should be at the top of the list. Attentively managing claim denial write-offs will significantly reduce lost revenue. There is significant interface between case management and the revenue cycle. Developing core competencies for reducing clinical and technical denials should be a critical imperative in overall cost management strategy. Case managers are well placed to prevent these unnecessary losses through accurate status determination and clinical documentation review. These clinical professionals can also provide insight into work flow and other processes inherent in the preauthorization process.

Comparison of Perceived and Technical Healthcare Quality in Primary Health Facilities: Implications for a Sustainable National Health Insurance Scheme in Ghana

PubMed Central

Alhassan, Robert Kaba; Duku, Stephen Opoku; Janssens, Wendy; Nketiah-Amponsah, Edward; Spieker, Nicole; van Ostenberg, Paul; Arhinful, Daniel Kojo; Pradhan, Menno; Rinke de Wit, Tobias F.

2015-01-01

Background Quality care in health facilities is critical for a sustainable health insurance system because of its influence on clients’ decisions to participate in health insurance and utilize health services. Exploration of the different dimensions of healthcare quality and their associations will help determine more effective quality improvement interventions and health insurance sustainability strategies, especially in resource constrained countries in Africa where universal access to good quality care remains a challenge. Purpose To examine the differences in perceptions of clients and health staff on quality healthcare and determine if these perceptions are associated with technical quality proxies in health facilities. Implications of the findings for a sustainable National Health Insurance Scheme (NHIS) in Ghana are also discussed. Methods This is a cross-sectional study in two southern regions in Ghana involving 64 primary health facilities: 1,903 households and 324 health staff. Data collection lasted from March to June, 2012. A Wilcoxon-Mann-Whitney test was performed to determine differences in client and health staff perceptions of quality healthcare. Spearman’s rank correlation test was used to ascertain associations between perceived and technical quality care proxies in health facilities, and ordered logistic regression employed to predict the determinants of client and staff-perceived quality healthcare. Results Negative association was found between technical quality and client-perceived quality care (coef. = -0.0991, p<0.0001). Significant staff-client perception differences were found in all healthcare quality proxies, suggesting some level of unbalanced commitment to quality improvement and potential information asymmetry between clients and service providers. Overall, the findings suggest that increased efforts towards technical quality care alone will not necessarily translate into better client-perceived quality care and willingness to utilize health services in NHIS-accredited health facilities. Conclusion There is the need to intensify client education and balanced commitment to technical and perceived quality improvement efforts. This will help enhance client confidence in Ghana’s healthcare system, stimulate active participation in the national health insurance, increase healthcare utilization and ultimately improve public health outcomes. PMID:26465935

Comparison of Perceived and Technical Healthcare Quality in Primary Health Facilities: Implications for a Sustainable National Health Insurance Scheme in Ghana.

PubMed

Alhassan, Robert Kaba; Duku, Stephen Opoku; Janssens, Wendy; Nketiah-Amponsah, Edward; Spieker, Nicole; van Ostenberg, Paul; Arhinful, Daniel Kojo; Pradhan, Menno; Rinke de Wit, Tobias F

2015-01-01

Quality care in health facilities is critical for a sustainable health insurance system because of its influence on clients' decisions to participate in health insurance and utilize health services. Exploration of the different dimensions of healthcare quality and their associations will help determine more effective quality improvement interventions and health insurance sustainability strategies, especially in resource constrained countries in Africa where universal access to good quality care remains a challenge. To examine the differences in perceptions of clients and health staff on quality healthcare and determine if these perceptions are associated with technical quality proxies in health facilities. Implications of the findings for a sustainable National Health Insurance Scheme (NHIS) in Ghana are also discussed. This is a cross-sectional study in two southern regions in Ghana involving 64 primary health facilities: 1,903 households and 324 health staff. Data collection lasted from March to June, 2012. A Wilcoxon-Mann-Whitney test was performed to determine differences in client and health staff perceptions of quality healthcare. Spearman's rank correlation test was used to ascertain associations between perceived and technical quality care proxies in health facilities, and ordered logistic regression employed to predict the determinants of client and staff-perceived quality healthcare. Negative association was found between technical quality and client-perceived quality care (coef. = -0.0991, p<0.0001). Significant staff-client perception differences were found in all healthcare quality proxies, suggesting some level of unbalanced commitment to quality improvement and potential information asymmetry between clients and service providers. Overall, the findings suggest that increased efforts towards technical quality care alone will not necessarily translate into better client-perceived quality care and willingness to utilize health services in NHIS-accredited health facilities. There is the need to intensify client education and balanced commitment to technical and perceived quality improvement efforts. This will help enhance client confidence in Ghana's healthcare system, stimulate active participation in the national health insurance, increase healthcare utilization and ultimately improve public health outcomes.

Effectiveness of facilitated introduction of a standard operating procedure into routine processes in the operating theatre: a controlled interrupted time series.

PubMed

Morgan, Lauren; New, Steve; Robertson, Eleanor; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; Pickering, Sharon P; Hadi, Mohammed; Griffin, Damian; McCulloch, Peter

2015-02-01

Standard operating procedures (SOPs) should improve safety in the operating theatre, but controlled studies evaluating the effect of staff-led implementation are needed. In a controlled interrupted time series, we evaluated three team process measures (compliance with WHO surgical safety checklist, non-technical skills and technical performance) and three clinical outcome measures (length of hospital stay, complications and readmissions) before and after a 3-month staff-led development of SOPs. Process measures were evaluated by direct observation, using Oxford Non-Technical Skills II for non-technical skills and the 'glitch count' for technical performance. All staff in two orthopaedic operating theatres were trained in the principles of SOPs and then assisted to develop standardised procedures. Staff in a control operating theatre underwent the same observations but received no training. The change in difference between active and control groups was compared before and after the intervention using repeated measures analysis of variance. We observed 50 operations before and 55 after the intervention and analysed clinical data on 1022 and 861 operations, respectively. The staff chose to structure their efforts around revising the 'whiteboard' which documented and prompted tasks, rather than directly addressing specific task problems. Although staff preferred and sustained the new system, we found no significant differences in process or outcome measures before/after intervention in the active versus the control group. There was a secular trend towards worse outcomes in the postintervention period, seen in both active and control theatres. SOPs when developed and introduced by frontline staff do not necessarily improve operative processes or outcomes. The inherent tension in improvement work between giving staff ownership of improvement and maintaining control of direction needs to be managed, to ensure staff are engaged but invest energy in appropriate change. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

75 FR 27341 - Increasing Market and Planning Efficiency Through Improved Software; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... Market and Planning Efficiency Through Improved Software; Notice of Technical Conference To Discuss Increasing Market and Planning Efficiency Through Improved Software May 7, 2010. Take notice that Commission... planning efficiency through improved software. [[Page 27342

[Analysis of the technical efficiency of hospitals in the Spanish National Health Service].

PubMed

Pérez-Romero, Carmen; Ortega-Díaz, M Isabel; Ocaña-Riola, Ricardo; Martín-Martín, José Jesús

To analyse the technical efficiency and productivity of general hospitals in the Spanish National Health Service (NHS) (2010-2012) and identify explanatory hospital and regional variables. 230 NHS hospitals were analysed by data envelopment analysis for overall, technical and scale efficiency, and Malmquist index. The robustness of the analysis is contrasted with alternative input-output models. A fixed effects multilevel cross-sectional linear model was used to analyse the explanatory efficiency variables. The average rate of overall technical efficiency (OTE) was 0.736 in 2012; there was considerable variability by region. Malmquist index (2010-2012) is 1.013. A 23% variability in OTE is attributable to the region in question. Statistically significant exogenous variables (residents per 100 physicians, aging index, average annual income per household, essential public service expenditure and public health expenditure per capita) explain 42% of the OTE variability between hospitals and 64% between regions. The number of residents showed a statistically significant relationship. As regards regions, there is a statistically significant direct linear association between OTE and annual income per capita and essential public service expenditure, and an indirect association with the aging index and annual public health expenditure per capita. The significant room for improvement in the efficiency of hospitals is conditioned by region-specific characteristics, specifically aging, wealth and the public expenditure policies of each one. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Development and implementation of centralized simulation training: evaluation of feasibility, acceptability and construct validity.

PubMed

Shamim Khan, Mohammad; Ahmed, Kamran; Gavazzi, Andrea; Gohil, Rishma; Thomas, Libby; Poulsen, Johan; Ahmed, Munir; Jaye, Peter; Dasgupta, Prokar

2013-03-01

WHAT'S KNOWN ON THE SUBJECT? AND WHAT DOES THE STUDY ADD?: A competent urologist should not only have effective technical skills, but also other attributes that would make him/her a complete surgeon. These include team-working, communication and decision-making skills. Although evidence for effectiveness of simulation exists for individual simulators, there is a paucity of evidence for utility and effectiveness of these simulators in training programmes that aims to combine technical and non-technical skills training. This article explains the process of development and validation of a centrally coordinated simulation program (Participants - South-East Region Specialist Registrars) under the umbrella of the British Association for Urological Surgeons (BAUS) and the London Deanery. This program incorporated training of both technical (synthetic, animal and virtual reality models) and non-technical skills (simulated operating theatres). To establish the feasibility and acceptability of a centralized, simulation-based training-programme. Simulation is increasingly establishing its role in urological training, with two areas that are relevant to urologists: (i) technical skills and (ii) non-technical skills. For this London Deanery supported pilot Simulation and Technology enhanced Learning Initiative (STeLI) project, we developed a structured multimodal simulation training programme. The programme incorporated: (i) technical skills training using virtual-reality simulators (Uro-mentor and Perc-mentor [Symbionix, Cleveland, OH, USA], Procedicus MIST-Nephrectomy [Mentice, Gothenburg, Sweden] and SEP Robotic simulator [Sim Surgery, Oslo, Norway]); bench-top models (synthetic models for cystocopy, transurethral resection of the prostate, transurethral resection of bladder tumour, ureteroscopy); and a European (Aalborg, Denmark) wet-lab training facility; as well as (ii) non-technical skills/crisis resource management (CRM), using SimMan (Laerdal Medical Ltd, Orpington, UK) to teach team-working, decision-making and communication skills. The feasibility, acceptability and construct validity of these training modules were assessed using validated questionnaires, as well as global and procedure/task-specific rating scales. In total 33, three specialist registrars of different grades and five urological nurses participated in the present study. Construct-validity between junior and senior trainees was significant. Of the participants, 90% rated the training models as being realistic and easy to use. In total 95% of the participants recommended the use of simulation during surgical training, 95% approved the format of the teaching by the faculty and 90% rated the sessions as well organized. A significant number of trainees (60%) would like to have easy access to a simulation facility to allow more practice and enhancement of their skills. A centralized simulation programme that provides training in both technical and non-technical skills is feasible. It is expected to improve the performance of future surgeons in a simulated environment and thus improve patient safety. © 2012 BJU International.

Advanced Exploration Systems Atmosphere Resource Recovery and Environmental Monitoring

NASA Technical Reports Server (NTRS)

Perry, J.; Abney, M.; Conrad, R.; Garber, A.; Howard, D.; Kayatin, M.; Knox, J.; Newton, R.; Parrish, K.; Roman, M.;

Technical aspects of positron emission tomography/computed tomography in radiotherapy treatment planning.

PubMed

Scripes, Paola G; Yaparpalvi, Ravindra

2012-09-01

The usage of functional data in radiation therapy (RT) treatment planning (RTP) process is currently the focus of significant technical, scientific, and clinical development. Positron emission tomography (PET) using ((18)F) fluorodeoxyglucose is being increasingly used in RT planning in recent years. Fluorodeoxyglucose is the most commonly used radiotracer for diagnosis, staging, recurrent disease detection, and monitoring of tumor response to therapy (Lung Cancer 2012;76:344-349; Lung Cancer 2009;64:301-307; J Nucl Med 2008;49:532-540; J Nucl Med 2007;48:58S-67S). All the efforts to improve both PET and computed tomography (CT) image quality and, consequently, lesion detectability have a common objective to increase the accuracy in functional imaging and thus of coregistration into RT planning systems. In radiotherapy, improvement in target localization permits reduction of tumor margins, consequently reducing volume of normal tissue irradiated. Furthermore, smaller treated target volumes create the possibility of dose escalation, leading to increased chances of tumor cure and control. This article focuses on the technical aspects of PET/CT image acquisition, fusion, usage, and impact on the physics of RTP. The authors review the basic elements of RTP, modern radiation delivery, and the technical parameters of coregistration of PET/CT into RT computerized planning systems. Copyright © 2012 Elsevier Inc. All rights reserved.

A mixed methods investigation into the use of non-technical skills by community and hospital pharmacists.

PubMed

Irwin, A; Weidmann, A E

2015-01-01

Non-technical skills refer to the social and cognitive factors that may influence efficient and safe job performance. Non-technical skills are an important element of patient safety in a variety of health care disciplines, including surgery, anesthesia and nursing. However, the use of non-technical skills in pharmacy practice has not yet been fully assessed. To examine attitudes toward, and use of, non-technical skills by pharmacy personnel. A mixed methods approach was used: An attitude survey explored pharmacy personnel attitudes towards non-technical skills and inter-professional collaboration, with community and hospital pharmacy staff (n = 62). Qualitative interviews were then conducted using the critical incident technique, with community pharmacists (n = 11). The survey results demonstrated differences in the opinions of community and hospital pharmacists on three non-technical skill constructs: team structure, mutual support, and situation monitoring, with community pharmacists reporting significantly more positive attitudes about all three constructs. Both groups reported low levels of collaboration with primary care physicians. The interviews identified five non-technical skills as key elements of successful pharmacist performance from the interview transcripts: teamwork; leadership; task management; situation awareness; decision-making. The survey and interviews identified the non-technical skills that are important to pharmacists. This represents the first step towards the development of a behavioral rating system for training purposes that could potentially improve the non-technical skills of pharmacists and enhance patient safety. Copyright © 2015 Elsevier Inc. All rights reserved.

Critical Analysis of the Quality, Readability, and Technical Aspects of Online Information Provided for Neck-Lifts.

PubMed

Rayess, Hani; Zuliani, Giancarlo F; Gupta, Amar; Svider, Peter F; Folbe, Adam J; Eloy, Jean Anderson; Carron, Michael A

2017-03-01

The number of patients using the internet to obtain health information is growing. This material is unregulated and heterogeneous and can influence patient decisions. To compare the quality, readability, and technical aspects of online information about neck-lifts provided by private practice websites vs academic medical centers and reference sources. In this cross-sectional analysis conducted between November 2015 and January 2016, a Google search of the term neck-lift was performed, and the first 45 websites were evaluated. The websites were categorized as private practice vs other. Private websites (PWs) included sites created by private practice physicians. Other websites (OWs) were created by academic medical centers or reference sources. Quality, readability, and technical aspects of online websites related to neck-lifts. Quality was assessed using the DISCERN criteria and the Health on the Net principles (HONcode). Readability was assessed using 7 validated and widely used criteria. Consensus US reading grade level readability was provided by a website (readabilityformulas.com). Twelve technical aspects were evaluated based on criteria specified by medical website creators. Forty-five websites (8 OWs [18%] and 37 PWs [82%]) were analyzed. There was a significant difference in quality between OWs and PWs based on the DISCERN criteria and HONcode principles. The DISCERN overall mean (SD) scores were 2.3 (0.5) for OWs and 1.3 (0.3) for PWs (P < .001). Of a total possible score of 14 using the HONcode analysis, the mean (SD) was 8.6 (1.8) (range, 5-11) for OW, and the mean (SD) was 5.8 (1.7) (range, 2-9) for PW. The mean (SD) readability consensus reading grade level scores were 11.7 (1.9) for OWs and 10.6 (1.9) for PWs. Of a total possible score of 12, the mean (SD) technical scores were 6.3 (1.8) (range, 4-9) for OWs and 6.4 (1.5) (range, 3-9) for PWs. Compared with PWs, OWs had a significantly higher quality score based on both the DISCERN criteria and HONcode principles. The mean readability for OWs and PWs was grade 11 and grade 10, respectively, significantly higher than the grade 7 level recommended by the National Institutes of Health. Assessment of technical criteria demonstrated room for improvement in providing links to social media and blogs and reducing advertisements. Improving the quality and readability of online information may result in increased patient understanding, more active patient involvement, and ultimately better outcomes. Enhancing the technical aspects of websites may increase website traffic and patient volume. NA.

Advanced Concepts in Structuring and Utilizing Local Advisory Councils and Craft Committees.

ERIC Educational Resources Information Center

Carroll, Richard E.

Adoption and implementation of advanced concepts in structuring and using a local advisory council and craft committees can result in significantly improved vocational education programs. The organizational structure of a vocational-technical school advisory council should be a vehicle that facilitates accomplishment of its prime function--to…

Improving Virtual Collaborative Learning through Canonical Action Research

ERIC Educational Resources Information Center

Weber, Peter; Lehr, Christian; Gersch, Martin

2014-01-01

Virtual collaboration continues to gain in significance and is attracting attention also as virtual collaborative learning (VCL) in education. This paper addresses aspects of VCL that we identified as critical in a series of courses named "Net Economy": (1) technical infrastructure, (2) motivation and collaboration, and (3) assessment…

Aligning K-12 and Postsecondary Career Pathways with Workforce Needs

ERIC Educational Resources Information Center

Zinth, Jennifer

2015-01-01

Since 2013, states have witnessed significant legislative activity related to secondary- and postsecondary-level career/technical education (CTE). One key goal of much recent policymaking activity has been to improve alignment between high school and postsecondary CTE programs, including by developing state or regional structures to design career…

Endoscopic non-technical skills team training: the next step in quality assurance of endoscopy training.

PubMed

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-12-14

To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day's training utilising real clinical examples. Pre and post-course evaluation comprised participants' patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams' knowledge and safety attitudes.

Endoscopic non-technical skills team training: The next step in quality assurance of endoscopy training

PubMed Central

Matharoo, Manmeet; Haycock, Adam; Sevdalis, Nick; Thomas-Gibson, Siwan

2014-01-01

AIM: To investigate whether novel, non-technical skills training for Bowel Cancer Screening (BCS) endoscopy teams enhanced patient safety knowledge and attitudes. METHODS: A novel endoscopy team training intervention for BCS teams was developed and evaluated as a pre-post intervention study. Four multi-disciplinary BCS teams constituting BCS endoscopist(s), specialist screening practitioners, endoscopy nurses and administrative staff (A) from English BCS training centres participated. No patients were involved in this study. Expert multidisciplinary faculty delivered a single day’s training utilising real clinical examples. Pre and post-course evaluation comprised participants’ patient safety awareness, attitudes, and knowledge. Global course evaluations were also collected. RESULTS: Twenty-three participants attended and their patient safety knowledge improved significantly from 43%-55% (P ≤ 0.001) following the training intervention. 12/41 (29%) of the safety attitudes items significantly improved in the areas of perceived patient safety knowledge and awareness. The remaining safety attitude items: perceived influence on patient safety, attitudes towards error management, error management actions and personal views following an error were unchanged following training. Both qualitative and quantitative global course evaluations were positive: 21/23 (91%) participants strongly agreed/agreed that they were satisfied with the course. Qualitative evaluation included mandating such training for endoscopy teams outside BCS and incorporating team training within wider endoscopy training. Limitations of the study include no measure of increased patient safety in clinical practice following training. CONCLUSION: A novel comprehensive training package addressing patient safety, non-technical skills and adverse event analysis was successful in improving multi-disciplinary teams’ knowledge and safety attitudes. PMID:25516665

Influence of non-preferred foot technical training in reducing lower limbs functional asymmetry among young football players.

PubMed

Guilherme, José; Garganta, Júlio; Graça, Amândio; Seabra, André

2015-01-01

The functional asymmetry of the lower limbs has been regarded as a relevant factor of the performance of football players. We purposed to ascertain whether a specific technical training programme for the non-preferred foot has implications in the increasing utilisation rate of the respective member during the game. Young football players (n = 71) were randomly divided into experimental group (N = 35; 14.37 ± 1.94 years) and control group (N = 36; 14.50 ± 1.81 years). The study was developed into three stages: first, assessment of the index utilisation of both limbs during the game; second, application of a technical training programme that includes the drilling of specific motor skills exclusively directed to the non-preferred foot; and third, assessment of the new rate of both limbs' utilisation after the predefined six months. The main findings were: (1) the use of the non-preferred foot increased significantly with the technical training programme in the experimental group and remained constant in the control group; (2) the use of the preferred foot decreased significantly in the experimental group and remained similar in control group. We concluded that a systematic and specific technical training for the non-preferred foot increases its use and reduces functional asymmetry in game situation, consequently improving the player's performance.

An intensive combined training program modulates physical, physiological, biomotoric, and technical parameters in women basketball players.

PubMed

Kilinç, Fatih

2008-11-01

The purpose of this study was the investigation of the effects of an intensive combined training program based on the pretest scores of a university women's basketball team on their physical, physiological, biomotoric, and technical features. Twenty-four university volunteers were equally divided into two groups: an experiment group (intensive combined training group) and a control (technical training) group. The 10-week intensive combined training program was performed on the experiment group according to their pretest outcomes. Before and at the end of each period of training, which was scheduled four times a week, the physical, physiological, biomotoric, and technical performance of each subject were determined. With respect to the pre- and posttest measurements, the basketball group showed significant differences (p < 0.05) in girth measurements (shoulder, waist, hip, arm, thigh, and calf), in skinfold measurements (percent body fat), in physiological measurements (vital capacity and forced vital capacity), in biomotoric tests (right-left hand grip, dynamic and countermovement jump, sit-up, push-up, 1500-m endurance), and in technique tests (free and inside shooting). It can be concluded that a 10-week intensive combined training program performed on university women basketball players had a significant effect on improving their physical, physiological, biomotoric, and technical features. It proved to be highly recommendable for female basketball players who are preparing for short-term tournaments; the basketball group in this study won a championship.

Improved Anvil Forecasting

NASA Technical Reports Server (NTRS)

Lambert, Winifred C.

2000-01-01

This report describes the outcome of Phase 1 of the AMU's Improved Anvil Forecasting task. Forecasters in the 45th Weather Squadron and the Spaceflight Meteorology Group have found that anvil forecasting is a difficult task when predicting LCC and FR violations. The purpose of this task is to determine the technical feasibility of creating an anvil-forecasting tool. Work on this study was separated into three steps: literature search, forecaster discussions, and determination of technical feasibility. The literature search revealed no existing anvil-forecasting techniques. However, there appears to be growing interest in anvils in recent years. If this interest continues to grow, more information will be available to aid in developing a reliable anvil-forecasting tool. The forecaster discussion step revealed an array of methods on how better forecasting techniques could be developed. The forecasters have ideas based on sound meteorological principles and personal experience in forecasting and analyzing anvils. Based on the information gathered in the discussions with the forecasters, the conclusion of this report is that it is technically feasible at this time to develop an anvil forecasting technique that will significantly contribute to the confidence in anvil forecasts.

Evaluation and analysis of the orbital maneuvering vehicle video system

NASA Technical Reports Server (NTRS)

Moorhead, Robert J., II

1989-01-01

The work accomplished in the summer of 1989 in association with the NASA/ASEE Summer Faculty Research Fellowship Program at Marshall Space Flight Center is summarized. The task involved study of the Orbital Maneuvering Vehicle (OMV) Video Compression Scheme. This included such activities as reviewing the expected scenes to be compressed by the flight vehicle, learning the error characteristics of the communication channel, monitoring the CLASS tests, and assisting in development of test procedures and interface hardware for the bit error rate lab being developed at MSFC to test the VCU/VRU. Numerous comments and suggestions were made during the course of the fellowship period regarding the design and testing of the OMV Video System. Unfortunately from a technical point of view, the program appears at this point in time to be trouble from an expense prospective and is in fact in danger of being scaled back, if not cancelled altogether. This makes technical improvements prohibitive and cost-reduction measures necessary. Fortunately some cost-reduction possibilities and some significant technical improvements that should cost very little were identified.

Contextual Sensing: Integrating Contextual Information with Human and Technical Geo-Sensor Information for Smart Cities

PubMed Central

Sagl, Günther; Resch, Bernd; Blaschke, Thomas

2015-01-01

In this article we critically discuss the challenge of integrating contextual information, in particular spatiotemporal contextual information, with human and technical sensor information, which we approach from a geospatial perspective. We start by highlighting the significance of context in general and spatiotemporal context in particular and introduce a smart city model of interactions between humans, the environment, and technology, with context at the common interface. We then focus on both the intentional and the unintentional sensing capabilities of today’s technologies and discuss current technological trends that we consider have the ability to enrich human and technical geo-sensor information with contextual detail. The different types of sensors used to collect contextual information are analyzed and sorted into three groups on the basis of names considering frequently used related terms, and characteristic contextual parameters. These three groups, namely technical in situ sensors, technical remote sensors, and human sensors are analyzed and linked to three dimensions involved in sensing (data generation, geographic phenomena, and type of sensing). In contrast to other scientific publications, we found a large number of technologies and applications using in situ and mobile technical sensors within the context of smart cities, and surprisingly limited use of remote sensing approaches. In this article we further provide a critical discussion of possible impacts and influences of both technical and human sensing approaches on society, pointing out that a larger number of sensors, increased fusion of information, and the use of standardized data formats and interfaces will not necessarily result in any improvement in the quality of life of the citizens of a smart city. This article seeks to improve our understanding of technical and human geo-sensing capabilities, and to demonstrate that the use of such sensors can facilitate the integration of different types of contextual information, thus providing an additional, namely the geo-spatial perspective on the future development of smart cities. PMID:26184221

Contextual Sensing: Integrating Contextual Information with Human and Technical Geo-Sensor Information for Smart Cities.

PubMed

Sagl, Günther; Resch, Bernd; Blaschke, Thomas

2015-07-14

In this article we critically discuss the challenge of integrating contextual information, in particular spatiotemporal contextual information, with human and technical sensor information, which we approach from a geospatial perspective. We start by highlighting the significance of context in general and spatiotemporal context in particular and introduce a smart city model of interactions between humans, the environment, and technology, with context at the common interface. We then focus on both the intentional and the unintentional sensing capabilities of today's technologies and discuss current technological trends that we consider have the ability to enrich human and technical geo-sensor information with contextual detail. The different types of sensors used to collect contextual information are analyzed and sorted into three groups on the basis of names considering frequently used related terms, and characteristic contextual parameters. These three groups, namely technical in situ sensors, technical remote sensors, and human sensors are analyzed and linked to three dimensions involved in sensing (data generation, geographic phenomena, and type of sensing). In contrast to other scientific publications, we found a large number of technologies and applications using in situ and mobile technical sensors within the context of smart cities, and surprisingly limited use of remote sensing approaches. In this article we further provide a critical discussion of possible impacts and influences of both technical and human sensing approaches on society, pointing out that a larger number of sensors, increased fusion of information, and the use of standardized data formats and interfaces will not necessarily result in any improvement in the quality of life of the citizens of a smart city. This article seeks to improve our understanding of technical and human geo-sensing capabilities, and to demonstrate that the use of such sensors can facilitate the integration of different types of contextual information, thus providing an additional, namely the geo-spatial perspective on the future development of smart cities.

Evolution and revolution: gauging the impact of technological and technical innovation on Olympic performance.

PubMed

Balmer, Nigel; Pleasence, Pascoe; Nevill, Alan

2012-01-01

A number of studies have pointed to a plateauing of athletic performance, with the suggestion that further improvements will need to be driven by revolutions in technology or technique. In the present study, we examine post-war men's Olympic performance in jumping events (pole vault, long jump, high jump, triple jump) to determine whether performance has indeed plateaued and to present techniques, derived from models of human growth, for assessing the impact of technological and technical innovation over time (logistic and double logistic models of growth). Significantly, two of the events involve well-documented changes in technology (pole material in pole vault) or technique (the Fosbury Flop in high jump), while the other two do not. We find that in all four cases, performance appears to have plateaued and that no further "general" improvement should be expected. In the case of high jump, the double logistic model provides a convenient method for modelling and quantifying a performance intervention (in this case the Fosbury Flop). However, some shortcomings are revealed for pole vault, where evolutionary post-war improvements and innovation (fibre glass poles) were concurrent, preventing their separate identification in the model. In all four events, it is argued that further general growth in performance will indeed need to rely predominantly on technological or technical innovation.

Endovascular aneurysm repair delivery redesign leads to quality improvement and cost reduction.

PubMed

Warner, Courtney J; Horvath, Alexander J; Powell, Richard J; Columbo, Jesse A; Walsh, Teri R; Goodney, Philip P; Walsh, Daniel B; Stone, David H

2015-08-01

Endovascular aneurysm repair (EVAR) is now a mainstay of therapy for abdominal aortic aneurysm, although it remains associated with significant expense. We performed a comprehensive analysis of EVAR delivery at an academic medical center to identify targets for quality improvement and cost reduction in light of impending health care reform. All infrarenal EVARs performed from April 2011 to March 2012 were identified (N = 127). Procedures were included if they met standard commercial instructions for use guidelines, used a single manufacturer, and were billed to Medicare diagnosis-related group 238 (n = 49). By use of DMAIC (define, measure, analyze, improve, and control) quality improvement methodology (define, measure, analyze, improve, control), targets for EVAR quality improvement were identified and high-yield changes were implemented. Procedure technical costs were calculated before and after process redesign. Perioperative services and clinic visits were identified as targets for quality improvement efforts and cost reduction. Mean technical costs before the intervention were $31,672, with endograft implants accounting for 52%. Pricing redesign in collaboration with hospital purchasing reduced mean EVAR technical costs to $28,607, a 10% reduction in overall cost, with endograft implants now accounting for 46%. Perioperative implementation of instrument tray redesign reduced instrument use by 32% (184 vs 132 instruments), saving $50,000 annually. Unnecessary clinic visits were reduced by 39% (1.6 vs 1.1 clinic visits per patient) through implementation of a preclinic imaging protocol. There was no difference in mean length of stay after the intervention. Comprehensive EVAR delivery redesign leads to cost reduction and waste elimination while preserving quality. Future efforts to achieve more competitive and transparent device pricing will make EVAR more cost neutral and enhance its financial sustainability for health care systems. Copyright © 2015 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

Endovascular aneurysm repair delivery redesign leads to quality improvement and cost reduction

PubMed Central

Warner, Courtney J.; Horvath, Alexander J.; Powell, Richard J.; Columbo, Jesse A.; Walsh, Teri R.; Goodney, Philip P.; Walsh, Daniel B.; Stone, David H.

2017-01-01

Objective Endovascular aneurysm repair (EVAR) is now a mainstay of therapy for abdominal aortic aneurysm, although it remains associated with significant expense. We performed a comprehensive analysis of EVAR delivery at an academic medical center to identify targets for quality improvement and cost reduction in light of impending health care reform. Methods All infrarenal EVARs performed from April 2011 to March 2012 were identified (N = 127). Procedures were included if they met standard commercial instructions for use guidelines, used a single manufacturer, and were billed to Medicare diagnosis-related group 238 (n = 49). By use of DMAIC (define, measure, analyze, improve, and control) quality improvement methodology (define, measure, analyze, improve, control), targets for EVAR quality improvement were identified and high-yield changes were implemented. Procedure technical costs were calculated before and after process redesign. Results Perioperative services and clinic visits were identified as targets for quality improvement efforts and cost reduction. Mean technical costs before the intervention were $31,672, with endograft implants accounting for 52%. Pricing redesign in collaboration with hospital purchasing reduced mean EVAR technical costs to $28,607, a 10% reduction in overall cost, with endograft implants now accounting for 46%. Perioperative implementation of instrument tray redesign reduced instrument use by 32% (184 vs 132 instruments), saving $50,000 annually. Unnecessary clinic visits were reduced by 39% (1.6 vs 1.1 clinic visits per patient) through implementation of a preclinic imaging protocol. There was no difference in mean length of stay after the intervention. Conclusions Comprehensive EVAR delivery redesign leads to cost reduction and waste elimination while preserving quality. Future efforts to achieve more competitive and transparent device pricing will make EVAR more cost neutral and enhance its financial sustainability for health care systems. PMID:25935271

Coaching Non-technical Skills Improves Surgical Residents' Performance in a Simulated Operating Room.

PubMed

Yule, Steven; Parker, Sarah Henrickson; Wilkinson, Jill; McKinley, Aileen; MacDonald, Jamie; Neill, Adrian; McAdam, Tim

2015-01-01

To investigate the effect of coaching on non-technical skills and performance during laparoscopic cholecystectomy in a simulated operating room (OR). Non-technical skills (situation awareness, decision making, teamwork, and leadership) underpin technical ability and are critical to the success of operations and the safety of patients in the OR. The rate of developing assessment tools in this area has outpaced development of workable interventions to improve non-technical skills in surgical training and beyond. A randomized trial was conducted with senior surgical residents (n = 16). Participants were randomized to receive either non-technical skills coaching (intervention) or to self-reflect (control) after each of 5 simulated operations. Coaching was based on the Non-Technical Skills For Surgeons (NOTSS) behavior observation system. Surgeon-coaches trained in this method coached participants in the intervention group for 10 minutes after each simulation. Primary outcome measure was non-technical skills, assessed from video by a surgeon using the NOTSS system. Secondary outcomes were time to call for help during bleeding, operative time, and path length of laparoscopic instruments. Non-technical skills improved in the intervention group from scenario 1 to scenario 5 compared with those in the control group (p = 0.04). The intervention group was faster to call for help when faced with unstoppable bleeding in the final scenario (no. 5; p = 0.03). Coaching improved residents' non-technical skills in the simulated OR compared with those in the control group. Important next steps are to implement non-technical skills coaching in the real OR and assess effect on clinically important process measures and patient outcomes. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Service use and financial performance in a replication program on adult day centers.

PubMed

Reifler, B V; Cox, N J; Jones, B N; Rushing, J; Yates, K

1999-01-01

The authors describe results from Partners in Caregiving: The Dementia Services Program, and present information on service utilization and financial performance among a group of 48 adult day centers across the United States from 1992 to 1996. Centers, with nonrandom assignment, received either grant support (average value: $93,000) or intensive technical assistance (average value: $39,000). Sites reported baseline data and submitted utilization information (enrollment and census) and financial data (revenue and expenses) quarterly. Overall, there were significant increases in enrollment, census, and financial performance (percent of cash expenses met through operating revenue) over the 4-year period. The grant-supported and technical-assistance sites had similar rates of improvement. Results provide data on service utilization and financial performance and demonstrate gains that can be achieved in these areas through improved marketing and financial management.

77 FR 19280 - Increasing Market and Planning Efficiency Through Improved Software; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... Market and Planning Efficiency Through Improved Software; Notice of Technical Conference: Increasing Real-Time and Day- Ahead Market Efficiency Through Improved Software Take notice that Commission staff will...-time and day-ahead market efficiency through improved software. A detailed agenda with the list of and...

76 FR 28022 - Increasing Market and Planning Efficiency Through Improved Software; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... Market and Planning Efficiency Through Improved Software; Notice of Technical Conference: Increasing Real-Time and Day- Ahead Market Efficiency Through Improved Software Take notice that Commission staff will... for increasing real-time and day-ahead market efficiency through improved software. This conference...

Impact of IQ, computer-gaming skills, general dexterity, and laparoscopic experience on performance with the da Vinci surgical system.

PubMed

Hagen, Monika E; Wagner, Oliver J; Inan, Ihsan; Morel, Philippe

2009-09-01

Due to improved ergonomics and dexterity, robotic surgery is promoted as being easily performed by surgeons with no special skills necessary. We tested this hypothesis by measuring IQ elements, computer gaming skills, general dexterity with chopsticks, and evaluating laparoscopic experience in correlation to performance ability with the da Vinci robot. Thirty-four individuals were tested for robotic dexterity, IQ elements, computer-gaming skills and general dexterity. Eighteen surgically inexperienced and 16 laparoscopically trained surgeons were included. Each individual performed three different tasks with the da Vinci surgical system and their times were recorded. An IQ test (elements: logical thinking, 3D imagination and technical understanding) was completed by each participant. Computer skills were tested with a simple computer game (hand-eye coordination) and general dexterity was evaluated by the ability to use chopsticks. We found no correlation between logical thinking, 3D imagination and robotic skills. Both computer gaming and general dexterity showed a slight but non-significant improvement in performance with the da Vinci robot (p > 0.05). A significant correlation between robotic skills, technical understanding and laparoscopic experience was observed (p < 0.05). The data support the conclusion that there are no significant correlations between robotic performance and logical thinking, 3D understanding, computer gaming skills and general dexterity. A correlation between robotic skills and technical understanding may exist. Laparoscopic experience seems to be the strongest predictor of performance with the da Vinci surgical system. Generally, it appears difficult to determine non-surgical predictors for robotic surgery.

Research Institute for Technical Careers

NASA Technical Reports Server (NTRS)

Glenn, Ronald L.

1996-01-01

The NASA research grant to Wilberforce University enabled us to establish the Research Institute for Technical Careers (RITC) in order to improve the teaching of science and engineering at Wilberforce. The major components of the research grant are infrastructure development, establishment of the Wilberforce Intensive Summer Experience (WISE), and Joint Research Collaborations with NASA Scientists. (A) Infrastructure Development. The NASA grant has enabled us to improve the standard of our chemistry laboratory and establish the electronics, design, and robotics laboratories. These laboratories have significantly improved the level of instruction at Wilberforce University. (B) Wilberforce Intensive Summer Experience (WISE). The WISE program is a science and engineering bridge program for prefreshman students. It is an intensive academic experience designed to strengthen students' knowledge in mathematics, science, engineering, computing skills, and writing. (C) Joint Collaboration. Another feature of the grant is research collaborations between NASA Scientists and Wilberforce University Scientists. These collaborations have enabled our faculty and students to conduct research at NASA Lewis during the summer and publish research findings in various journals and scientific proceedings.

Factors influencing private health providers' technical quality of care for acute respiratory infections among under-five children in rural West Bengal, India.

PubMed

Chakraborty, Sarbani; Frick, Kevin

2002-11-01

In many developing countries, private health practitioners provide a significant portion of curative care for diseases which are of public health importance. Currently, health sector reform efforts in these countries are fostering increased participation of private providers in the delivery of health services, including those of public health importance. Guaranteeing good technical quality of care is critical to the process. However, little is known about private providers' technical quality of care (disease management practices) and the factors influencing these services. The purpose of this study was to contribute information on this topic. The study was conducted among private providers in rural West Bengal, India and focused on providers' disease management practices for acute respiratory infections (ARI) among under-five children. World Health Organization (WHO) guidelines for ARI case management were used as the expected standard of care. Observations of patient-provider encounters and interviews with the providers and mothers were the main sources of data. The study found that private health providers in rural West Bengal have inadequate technical quality of care. The problem was related both to low levels of performance (limited potential) and inconsistency in performance (within-provider variation). Limited potential for good technical quality for ARI among the providers was related to lack of knowledge (technical incompetence). One of the important factors influencing within-provider variation was patient load. Since rural private providers operate on a fee-for-service payment system, there are incentives related to seeing many patients. The study concluded that to bring about sustainable improvements in private providers' ARI disease management practices, training programs and interventions that improved compliance were necessary.

Improved technical performance of a multifunctional prehospital telemedicine system between the research phase and the routine use phase - an observational study.

PubMed

Felzen, Marc; Brokmann, Jörg C; Beckers, Stefan K; Czaplik, Michael; Hirsch, Frederik; Tamm, Miriam; Rossaint, Rolf; Bergrath, Sebastian

2017-04-01

Introduction Telemedical concepts in emergency medical services (EMS) lead to improved process times and patient outcomes, but their technical performance has thus far been insufficient; nevertheless, the concept was transferred into EMS routine care in Aachen, Germany. This study evaluated the system's technical performance and compared it to a precursor system. Methods The telemedicine system was implemented on seven ambulances and a teleconsultation centre staffed with experienced EMS physicians was established in April 2014. Telemedical applications included mobile vital data, 12-lead, picture transmission and video streaming from inside the ambulances. The tele-EMS physician filled in a questionnaire regarding the technical performance of the applications, background noise and assessed clinical values of the transmitted pictures and videos after each mission between 15 May 2014-15 October 2014. Results Teleconsultation was established during 539 emergency cases. In 83% of the cases ( n = 447), only the paramedics and the tele-EMS physician were involved. Transmission success rates ranged from 98% (audio connection) to 93% (12-lead electrocardiogram (ECG) transmission). All functionalities, except video transmission, were significantly better than the pilot project ( p < 0.05). Severe background noise was detected to a lesser extent ( p = 0.0004) and the clinical value of the pictures and videos were considered significantly more valuable. Discussion The multifunctional system is now sufficient for routine use and is the most reliable mobile emergency telemedicine system compared to other published projects. Dropouts were due to user errors and network coverage problems. These findings enable widespread use of this system in the future, reducing the critical time intervals until medical therapy is started.

Follow-up of negative MRI-targeted prostate biopsies: when are we missing cancer?

PubMed

Gold, Samuel A; Hale, Graham R; Bloom, Jonathan B; Smith, Clayton P; Rayn, Kareem N; Valera, Vladimir; Wood, Bradford J; Choyke, Peter L; Turkbey, Baris; Pinto, Peter A

2018-05-21

Multiparametric magnetic resonance imaging (mpMRI) has improved clinicians' ability to detect clinically significant prostate cancer (csPCa). Combining or fusing these images with the real-time imaging of transrectal ultrasound (TRUS) allows urologists to better sample lesions with a targeted biopsy (Tbx) leading to the detection of greater rates of csPCa and decreased rates of low-risk PCa. In this review, we evaluate the technical aspects of the mpMRI-guided Tbx procedure to identify possible sources of error and provide clinical context to a negative Tbx. A literature search was conducted of possible reasons for false-negative TBx. This includes discussion on false-positive mpMRI findings, termed "PCa mimics," that may incorrectly suggest high likelihood of csPCa as well as errors during Tbx resulting in inexact image fusion or biopsy needle placement. Despite the strong negative predictive value associated with Tbx, concerns of missed disease often remain, especially with MR-visible lesions. This raises questions about what to do next after a negative Tbx result. Potential sources of error can arise from each step in the targeted biopsy process ranging from "PCa mimics" or technical errors during mpMRI acquisition to failure to properly register MRI and TRUS images on a fusion biopsy platform to technical or anatomic limits on needle placement accuracy. A better understanding of these potential pitfalls in the mpMRI-guided Tbx procedure will aid interpretation of a negative Tbx, identify areas for improving technical proficiency, and improve both physician understanding of negative Tbx and patient-management options.

Potential for extending major land resource areas into northern Mexico

Treesearch

Roy S. Mann; Philip Heilman; Jeffry Stone

2013-01-01

There is a significant history of cooperative efforts between Mexico and the United States on natural resource management issues. Mexico and the United States have jointly conducted research and developed range management technologies. Bringing these technologies together and improving technical communications are an ongoing process. This paper discusses a potential...

The MDE Diploma: First International Postgraduate Specialization in Model-Driven Engineering

ERIC Educational Resources Information Center

Cabot, Jordi; Tisi, Massimo

2011-01-01

Model-Driven Engineering (MDE) is changing the way we build, operate, and maintain our software-intensive systems. Several projects using MDE practices are reporting significant improvements in quality and performance but, to be able to handle these projects, software engineers need a set of technical and interpersonal skills that are currently…

History and Development of Instructional Technology and Media in Social Work Education

ERIC Educational Resources Information Center

Shorkey, Clayton T.; Uebel, Michael

2014-01-01

Since the mid-20th century, instructional technologies and educational media in social work education have undergone significant development with the goals of improving learning and performance and enhancing access. This growth has been marked by technical advances in hardware and by innovations in media, or so-called soft formats. Current…

Aligning Theme and Information Structure to Improve the Readability of Technical Writing

ERIC Educational Resources Information Center

Moore, N. A. J.

2006-01-01

The readability of technical writing, and technical manuals in particular, especially for second language readers, can be noticeably improved by pairing Theme with Given and Rheme with New. This allows for faster processing of text and easier access to the "method of development" of the text. Typical Theme-Rheme patterns are described, and the…

Simulated lumbar minimally invasive surgery educational model with didactic and technical components.

PubMed

Chitale, Rohan; Ghobrial, George M; Lobel, Darlene; Harrop, James

2013-10-01

The learning and development of technical skills are paramount for neurosurgical trainees. External influences and a need for maximizing efficiency and proficiency have encouraged advancements in simulator-based learning models. To confirm the importance of establishing an educational curriculum for teaching minimally invasive techniques of pedicle screw placement using a computer-enhanced physical model of percutaneous pedicle screw placement with simultaneous didactic and technical components. A 2-hour educational curriculum was created to educate neurosurgical residents on anatomy, pathophysiology, and technical aspects associated with image-guided pedicle screw placement. Predidactic and postdidactic practical and written scores were analyzed and compared. Scores were calculated for each participant on the basis of the optimal pedicle screw starting point and trajectory for both fluoroscopy and computed tomographic navigation. Eight trainees participated in this module. Average mean scores on the written didactic test improved from 78% to 100%. The technical component scores for fluoroscopic guidance improved from 58.8 to 52.9. Technical score for computed tomography-navigated guidance also improved from 28.3 to 26.6. Didactic and technical quantitative scores with a simulator-based educational curriculum improved objectively measured resident performance. A minimally invasive spine simulation model and curriculum may serve a valuable function in the education of neurosurgical residents and outcomes for patients.

Factors affecting the technical efficiency of general hospitals in Iran: data envelopment analysis.

PubMed

Kalhor, Rohollah; Amini, Saeed; Sokhanvar, Mobin; Lotfi, Farhad; Sharifi, Marziye; Kakemam, Edris

2016-03-01

Restrictions on resource accessibility and its optimal application is the main challenge in organizations nowadays. The aim of this research was to study the technical efficiency and its related factors in Tehran general hospitals. This descriptive analytical study was conducted retrospectively in 2014. Fifty-four hospitals with private, university, and social security ownerships from the total 110 general hospitals were randomly selected for inclusion into this study on the basis of the share of ownership. Data were collected using a checklist with three sections, including background variables, inputs, and outputs. Seventeen (31.48%) hospitals had an efficiency score of 1 (highest efficiency score). The highest average efficiency score was in social security hospitals (84.32). Private and university hospitals ranked next with an average of 84.29 and 79.64, respectively. Analytical results showed that there was a significant relationship between hospital ownership, hospital type in terms of duty and specialization, educational field of the chief executive officer, and technical efficiency. There was no significant relationship between education level of hospital manager and technical efficiency. Most of the studied hospitals were operating at low efficiency. Therefore, policymakers should plan to improve the hospital operations and promote hospitals to an optimal level of efficiency.

Boiler water regime

NASA Astrophysics Data System (ADS)

Khavanov, Pavel; Chulenyov, Anatoly

2017-10-01

Active development of autonomous heating the past 25 years has led to the widespread use of hot-water boilers of small capacity up to 2.5 MW. Rational use of the design of autonomous sources of heating boilers design features significantly improve their technical, economic and operational performance. This publication reviewed and analyzed a number of features of the design, operation and exploitation of boilers of small capacity, significantly affecting the efficiency and reliability of their application.

Structured training on the da Vinci Skills Simulator leads to improvement in technical performance of robotic novices.

PubMed

Walliczek-Dworschak, U; Mandapathil, M; Förtsch, A; Teymoortash, A; Dworschak, P; Werner, J A; Güldner, C

2017-02-01

The increasing use of minimally invasive techniques such as robotic-assisted devices raises the question of how to acquire robotic surgery skills. The da Vinci Skills Simulator has been demonstrated to be an effective training tool in previous reports. To date, little data are available on how to acquire proficiency through simulator training. We investigated the outcome of a structured training programme for robotic surgical skills by robotic novices. This prospective study was conducted from January to December 2013 using the da Vinci Skills Simulator. Twenty participants, all robotic novices, were enrolled in a 4-week training curriculum. After a brief introduction to the simulator system, three consecutive repetitions of five selected exercises (Match Board 1, 2, 3 and Ring and Rail 1, 2) were performed in a defined order on days 1, 8, 15 and 22. On day 22, one repetition of a previously unpractised more advanced module (Needle Targeting) was also performed. After completion of each study day, the overall performance, time to completion, economy in motion, instrument collisions, excessive instrument force, instruments out of view, master workspace range and number of drops were analysed. Comparing the first and final repetition, overall score and time needed to complete all exercises, economy of motion and instrument collisions were significantly improved in nearly all exercises. Regarding the new exercise, a positive training effect could be demonstrated. While its overall entry score was significantly higher, the time to completion and economy of motion were significantly lower than the scores on the first repetition of the previous 5 exercises. It could be shown that training on the da Vinci Skills Simulator led to an improvement in technical performance of robotic novices. With regard to a new exercise, the training had a positive effect on the technical performance. © 2016 John Wiley & Sons Ltd.

Development and implementation of a clinical pathway approach to simulation-based training for foregut surgery.

PubMed

Miyasaka, Kiyoyuki W; Buchholz, Joseph; LaMarra, Denise; Karakousis, Giorgos C; Aggarwal, Rajesh

2015-01-01

Contemporary demands on resident education call for integration of simulation. We designed and implemented a simulation-based curriculum for Post Graduate Year 1 surgery residents to teach technical and nontechnical skills within a clinical pathway approach for a foregut surgery patient, from outpatient visit through surgery and postoperative follow-up. The 3-day curriculum for groups of 6 residents comprises a combination of standardized patient encounters, didactic sessions, and hands-on training. The curriculum is underpinned by a summative simulation "pathway" repeated on days 1 and 3. The "pathway" is a series of simulated preoperative, intraoperative, and postoperative encounters in following up a single patient through a disease process. The resident sees a standardized patient in the clinic presenting with distal gastric cancer and then enters an operating room to perform a gastrojejunostomy on a porcine tissue model. Finally, the resident engages in a simulated postoperative visit. All encounters are rated by faculty members and the residents themselves, using standardized assessment forms endorsed by the American Board of Surgery. A total of 18 first-year residents underwent this curriculum. Faculty ratings of overall operative performance significantly improved following the 3-day module. Ratings of preoperative and postoperative performance were not significantly changed in 3 days. Resident self-ratings significantly improved for all encounters assessed, as did reported confidence in meeting the defined learning objectives. Conventional surgical simulation training focuses on technical skills in isolation. Our novel "pathway" curriculum targets an important gap in training methodologies by placing both technical and nontechnical skills in their clinical context as part of managing a surgical patient. Results indicate consistent improvements in assessments of performance as well as confidence and support its continued usage to educate surgery residents in foregut surgery. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

The effect of general surgery clerkship rotation on the attitude of medical students towards general surgery as a future career.

PubMed

Al-Heeti, Khalaf N M; Nassar, Aussama K; Decorby, Kara; Winch, Joanne; Reid, Susan

2012-01-01

Literature suggests declining interest in General Surgery (GS) and other surgical specialties, with fewer Canadian medical residency applicants identifying a surgical specialty as their first choice. Although perceptions of surgical careers may begin before enrollment in clerkship, clerkship itself provides the most concentrated environment for perceptions to evolve. Most students develop perceptions about specialties during their clinical clerkships. This study examines the immediate impact of GS clerkship on student attitudes toward GS as a career, and on preferences towards GS compared with other specialties. A pre-post design involved 61 McMaster clinical clerks. Two instruments were used to collect data from students over the course of clerkship (2008-2009). Paired comparison (PC) compared ranking of career choices before and after clerkship. Semantic differential (SD) measured attitudes toward GS and variables that may have affected attitudes before and after clerkship. Analyses used SPSS 16.0 (SPSS Inc., Chicago, IL). Clerks ranked preferences for GS changed substantially after clerkship, moving from the 10th to the 5th position compared with other specialties. Ranks of surgical subspecialties also changed, though GS demonstrated the largest improvement. SD results were consistent with PC, showing improved attitudes after rotation, with differences both statistically and practically significant (t = 3.81, p < 0.000, effect size = 0.23). Results indicated that attitudes toward all areas related to GS clerkship (attending physicians, surgical residents, ward nurses, scrub nurses, workload, knowledge achieved, technical skills acquired) improved significantly except attitude toward technical skills acquired. Clinical clerkship at McMaster was a positive experience and significantly enhanced preferences towards GS and attitudes towards GS as a career. Medical schools should foster positive interaction between clinical clerks and staff (including attending surgeons and nurses), ensure that teaching hospital staff provide a positive experience for clerks, and should provide opportunities to learn basic technical skills during GS clerkship. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Adrenal vein sampling: substantial need for technical improvement at regional referral centres.

PubMed

Elliott, Panda; Holmes, Daniel T

2013-10-01

Adrenal vein sampling (AVS) is the gold standard for localization of aldosterone producing adenoma. The anatomy of the right adrenal vein makes this procedure technically demanding and it may yield no clinical information if the adrenal veins are not adequately cannulated. Having frequently observed the technical failure of AVS, we undertook a review of 220 procedures in British Columbia, Canada. Subjects were retrospectively identified through the laboratory information system. The following were collected: demographics, screening aldosterone concentration and renin activity/mass, results of dynamic function tests, AVS aldosterone and cortisol results. Standard calculations were performed on AVS data and site-specific success rates were compared. The effect of adrenocorticotropin hormone (ACTH) stimulation on the selectivity index (SI) and lateralization index (LI) were explored. The overall technical success-rate of AVS procedures was only 44% in procedures where no ACTH-stimulation was used (n=200) but this rose significantly (p<0.01) to 82% for those employing ACTH (n=139). ACTH-stimulation significantly increased the median SI (left: 5.8 vs 36.7, p<0.01; right: 7.0 vs 51.2, p<0.01), and salvaged 36 procedures from yielding no information, 21 of which demonstrated lateralization of aldosterone production. In 64 cases showing lateralization both pre and post-stimulation, ACTH significantly decreased the median LI from 5.4 to 2.2, p<0.01, creating substantial risk for spurious loss of lateralization. The technical success of AVS is lower than reported elsewhere. Provided that effects on the LI are considered, the use of ACTH-stimulation during AVS assists in the identification of unilateral forms of PA. Copyright © 2013 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Percutaneous Coronary Revascularization for Chronic Total Occlusions: A Novel Predictive Score of Technical Failure Using Advanced Technologies.

PubMed

Galassi, Alfredo R; Boukhris, Marouane; Azzarelli, Salvatore; Castaing, Marine; Marzà, Francesco; Tomasello, Salvatore D

2016-05-09

The aims of this study were to describe the 10-year experience of a single operator dedicated to chronic total occlusion (CTO) and to establish a model for predicting technical failure. During the last decade, the interest in percutaneous coronary interventions (PCIs) of chronic total occlusions (CTOs) has increased, allowing the improvement of success rate. One thousand nineteen patients with CTO underwent 1,073 CTO procedures performed by a single CTO-dedicated operator. The study population was subdivided into 2 groups by time period: period 1 (January 2005 to December 2009, n = 378) and period 2 (January 2010 to December 2014, n = 641). Observations were randomly assigned to a derivation set and a validation set (in a 2:1 ratio). A prediction score was established by assigning points for each independent predictor of technical failure in the derivation set according to the beta coefficient and summing all points accrued. Lesions attempted in period 2 were more complex in comparison with those in period 1. Compared with period 1, both technical and clinical success rates significantly improved (from 87.8% to 94.4% [p = 0.001] and from 77.6% to 89.9% [p < 0.001], respectively). A prediction score for technical failure including age ≥75 years (1 point), ostial location (1 point), and collateral filling Rentrop grade <2 (2 points) was established, stratifying procedures into 4 difficulty groups: easy (0), intermediate (1), difficult (2), and very difficult (3 or 4), with decreasing technical success rates. In derivation and validation sets, areas under the curve were comparable (0.728 and 0.772, respectively). With growing expertise, the success rate has increased despite increasing complexity of attempted lesions. The established model predicted the probability of technical failure and thus might be applied to grading the difficulty of CTO procedures. Copyright © 2016 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Thin EFG octagons

NASA Astrophysics Data System (ADS)

Kalejs, J. P.

1994-06-01

This report describes the impact of the technical achievements made in the first 18 months of the three year PVMaT program at Mobil Solar on lowering the manufacturing costs of its photovoltaic polycrystalline silicon-based modules. Manufacturing cost decreases are being achieved through a reduction of silicon material utilization, increases in productivity and yield in crystal growth, and through improvements in the laser cutting process for EFG wafers. The yield, productivity, and throughput advances made possible by these technical achievements are shown to be able to enhance future market share growth for Mobil Solar products as a consequence of significant reductions in a number of direct manufacturing cost elements in EFG wafer and module production.

A Survey of Vocational Administrators and Teachers in Career and Technical Education Centers regarding Their Perception of Vocational Program Improvements

ERIC Educational Resources Information Center

Hummel, Richard Lynn, Jr.

2012-01-01

The purpose of this statewide study is to assess the perceived improvements made to programs that are offered at Career and Technical Education Centers from the perspective of vocational administrators and teachers following the Bureau of Career and Technical Education conduction of an Approved Program Evaluation. The Pennsylvania Bureau of Career…

Transforming South-South technical support to fight noncommunicable diseases.

PubMed

Shakow, Aaron D A; Bukhman, Gene; Adebona, Olumuyiwa; Greene, Jeremy; de Dieu Ngirabega, Jean; Binagwaho, Agnès

2012-03-01

At the UN High-Level Meeting on non-communicable diseases (NCD) in September 2011, each member state was challenged to create a multisectoral national policy and plan for the prevention and control of non-communicable disease by 2013. Few low-income countries, however, currently have such plans. Their governments are likely to turn for assistance in drafting and implementation to multilateral agencies and Contract Technical Support Organizations recommended by development partners. Yet because many NCD seen in the lowest-income countries differ significantly from those prevalent elsewhere, existing providers of external technical support may lack the necessary experience to support strategic planning for NCD interventions in these settings. This article reviews currently available mechanisms of technical support for health sector planning. It places them in the broader historical context of post- World War II international development assistance and the more recent campaigns for horizontal "South-South" cooperation and aid effectiveness. It proposes bilateral technical assistance by low income-countries themselves as the natural evolution of development assistance in health. Such programs, it argues, may be able to improve the quality of technical support to low-income countries for strategic planning in the NCD area while directing resources to the regions where they are most needed. Copyright © 2012 World Heart Federation (Geneva). Published by Elsevier B.V. All rights reserved.

Service dogs in the province of Quebec: sociodemographic profile of users and the dogs' impact on functional ability.

PubMed

Vincent, Claude; Gagnon, Dany; Routhier, François; Leblond, Jean; Boucher, Pascale; Blanchet, Marie; Martin-Lemoyne, Valérie

2015-03-01

The objectives of this study were to (1) describe the sociodemographic profile of service dog users, their physical disabilities, main occupations, living environment, and use of technical aids in daily life and (2) evaluate the impact of service dogs on wheelchair travel and picking up objects. Sociodemographic and clinical data were collected and various mobility tests were conducted in the service dog users' home environment (n = 199). The service dog users had injuries to the central or peripheral nervous system (55%), spinal cord (33%), or musculoskeletal or orthopedic system (12%). In the wheelchair travel on flat terrain test (n = 67), users travelled a longer distance in a shorter time, improving their average speed to 1.28 m/s with the service dog compared to 0.75 m/s without (p < 0.001). In a wheelchair propelling up a slope, 42% improved with the service dog (n = 60). Mounting a threshold/curb in a wheelchair, 41% improved with the service dog (n = 39). In a test where walkers and wheelchair users picked up three objects off the ground, 44% improved with the service dog (n = 164). Service dogs significantly improved wheelchair travel speed and distance on flat and ascending terrain, mounting a threshold/curb and picking up objects off the ground. Implications for Rehabilitation For people with motor impairments: Service dogs are most often used as a technical aid to pick up objects (96%), open doors (36%) and pull the wheelchair during travel (34%). Clients' performance in significant travel in a wheelchair (on flat terrain, on an upslope, mounting a threshold) improved with the service dog compared to their own performance without the dog. Clients' grasping performance (picking up three significant objects off the ground) improved with the service dog compared to their own performance without the dog.

Thin EFG octagons

NASA Astrophysics Data System (ADS)

Kalejs, J. P.

1994-03-01

This report describes work to advance the manufacturing line capabilities in crystal growth and laser cutting of Mobil Solar's unique edge-defined film-fed growth (EFG) octagon technology and to reduce the manufacturing costs of 10 cm x 10 cm polycrystalline silicon EFG wafers. The report summarizes the significant technical improvements in EFG technology achieved in the first 6 months of the PVMaT Phase 2 and the success in meeting program milestones. Technical results are reported for each of the three main pregrain areas: Task 5 -- Thin octagon growth (crystal growth) to reduce the thickness of the octagon to 200 microns; Task 6 -- Laser cutting-to improve the laser cutting process so as to produce wafers with decreased laser cutting damage at increased wafer throughput rates; and Task 7 -- Process control and product specification to implement advanced strategies in crystal growth process control and productivity designed to increase wafer yields.

Solar Energy Economics Revisited: The Promise and Challenge of Orbiting Reflectors for World Energy Supply

NASA Technical Reports Server (NTRS)

Billman, Kenneth W.; Gilbreath, William P.; Bowen, Stuart W.

1978-01-01

A system of orbiting, large-area, low mass density reflector satellites which provide nearly continuous solar energy to a world-distributed set of conversion sites is examined under the criteria for any potential new energy system: technical feasibility, significant and renewable energy impact, economic feasibility and social/political acceptability. Although many technical issues need further study, reasonable advances in space technology appear sufficient to implement the system. The enhanced insolation is shown to greatly improve the economic competitiveness of solar-electric generation to circa 1995 fossil/nuclear alternatives. The system is shown to have the potential for supplying a significant fraction of future domestic and world energy needs. Finally, the environmental and social issues, including a means for financing such a large shift to a world solar energy dependence, is addressed.

Technical and scale efficiency in the delivery of child health services in Zambia: results from data envelopment analysis.

PubMed

Achoki, Tom; Hovels, Anke; Masiye, Felix; Lesego, Abaleng; Leufkens, Hubert; Kinfu, Yohannes

2017-01-05

Despite tremendous efforts to scale up key maternal and child health interventions in Zambia, progress has not been uniform across the country. This raises fundamental health system performance questions that require further investigation. Our study investigates technical and scale efficiency (SE) in the delivery of maternal and child health services in the country. The study focused on all 72 health districts of Zambia. We compiled a district-level database comprising health outcomes (measured by the probability of survival to 5 years of age), health outputs (measured by coverage of key health interventions) and a set of health system inputs, namely, financial resources and human resources for health, for the year 2010. We used data envelopment analysis to assess the performance of subnational units across Zambia with respect to technical and SE, controlling for environmental factors that are beyond the control of health system decision makers. Nationally, average technical efficiency with respect to improving child survival was 61.5% (95% CI 58.2% to 64.8%), which suggests that there is a huge inefficiency in resource use in the country and the potential to expand services without injecting additional resources into the system. Districts that were more urbanised and had a higher proportion of educated women were more technically efficient. Improved cooking methods and donor funding had no significant effect on efficiency. With the pressing need to accelerate progress in population health, decision makers must seek efficient ways to deliver services to achieve universal health coverage. Understanding the factors that drive performance and seeking ways to enhance efficiency offer a practical pathway through which low-income countries could improve population health without necessarily seeking additional resources. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Improving Technical Instruction Using Personality Styles.

ERIC Educational Resources Information Center

Tomal, Daniel R.

2003-01-01

Incorporating personality styles into technical instruction can enhance student learning. Four personality styles based on Jung--intuitor, feeler, thinker, and doer--have implications for individualizing technical instruction. (JOW)

The Successful Teacher in Technical Education: The Preparation of the Successful Teacher.

ERIC Educational Resources Information Center

Storm, George

The purposes of this study were to identify success factors in technical education teaching and to obtain subject matter recommendations for the improvement of technical teacher education. A national population of technical education directors offering post-secondary technical education programs in 1963 under Title III of the National Defense…

Improvement of research report distribution and access and promotion of more effective use of Technical Report Documentation Page, USDOT Form 1700.7.

DOT National Transportation Integrated Search

2014-09-30

This report covers two studies: (Part A) Improvement of research report distribution and access process improvement of State Planning and Research (SPR) funded reports; and (Part B) Promotion of more effective use of the Technical Report Documentatio...

The health sector reforms and the efficiency of public hospitals in Turkey: provincial markets.

PubMed

Sulku, Seher Nur

2012-10-01

Turkey initiated the 'Health Transformation Programme' (HTP) in 2003 to align its health care system with the European Union and OECD countries. This study investigates the impact of these reforms on the efficiency of public hospitals. Our study would contribute to the existing literature with a comprehensive analysis of the health system in a developing country. We employ the data envelopment approach and the Malmquist index to comparatively examine before and after the reform years. Our analyses compare the performances of public hospitals served in provincial markets. Inputs of number of beds, number of primary care physician, and number of specialists, and how they are used to produce outputs of inpatient discharges, outpatient visits and surgical operations are investigated. Indeed, as the performance indicators dead rate, hospital bed occupation rate and average length of stay are considered. The HTP was generally successful in boosting productivity due to advancements in technology and technical efficiency but in the socio-economically disadvantaged provinces productivity gains have not been achieved. The average technical efficiency gains took place because of the significantly improved scale efficiencies, as the average pure technical efficiency slightly improved. Lastly, the hospital performance indicators have not improved in the short run. It appears that the expected benefits from the health reforms in Turkey have been partially achieved in the short run.

The effect of teamwork training on team performance and clinical outcome in elective orthopaedic surgery: a controlled interrupted time series study.

PubMed

Morgan, Lauren; Hadi, Mohammed; Pickering, Sharon; Robertson, Eleanor; Griffin, Damian; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; McCulloch, Peter; New, Steve

2015-04-20

To evaluate the effectiveness of aviation-style teamwork training in improving operating theatre team performance and clinical outcomes. 3 operating theatres in a UK district general hospital, 1 acting as a control group and the other 2 as the intervention group. 72 operations (37 intervention, 35 control) were observed in full by 2 trained observers during two 3-month observation periods, before and after the intervention period. A 1-day teamwork training course for all staff, followed by 6 weeks of weekly in-service coaching to embed learning. We measured team non-technical skills using Oxford NOTECHS II, (evaluating the whole team and the surgical, anaesthetic and nursing subteams, and evaluated technical performance using the Glitch count. We evaluated compliance with the WHO checklist by recording whether time-out (T/O) and sign-out (S/O) were attempted, and whether T/O was fully complied with. We recorded complications, re-admissions and duration of hospital stay using hospital administrative data. We compared the before-after change in the intervention and control groups using 2-way analysis of variance (ANOVA) and regression modelling. Mean NOTECHS II score increased significantly from 71.6 to 75.4 in the active group but remained static in the control group (p=0.047). Among staff subgroups, the nursing score increased significantly (p=0.006), but the anaesthetic and surgical scores did not. The attempt rate for WHO T/O procedures increased significantly in both active and control groups, but full compliance with T/O improved only in the active group (p=0.003). Mean glitch rate was unchanged in the control group but increased significantly (7.2-10.2/h, p=0.002) in the active group. Teamwork training was associated with improved non-technical skills in theatre teams but also with a rise in operative glitches. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

TAC Evaluation Assistance: A Ten-Year Evolution from Accountability to Program Improvement.

ERIC Educational Resources Information Center

Yap, Kim O.

The Title I/Chapter 1 Technical Assistance Centers (TACs) were originally created to provide assistance to state and local education agencies in implementing the Title I evaluation and reporting system. However, over a 10-year period, TAC role has changed significantly. Its service foci have evolved from providing evaluation assistance to helping…

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Technical Reports Server (NTRS)

Raiman, Laura B.

1992-01-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Astrophysics Data System (ADS)

Raiman, Laura B.

1992-12-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015-2016.

PubMed

Chiappone, Alethea; Smith, Teresa M; Estabrooks, Paul A; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

2018-04-26

The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015-2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily general information rather than tailored technical assistance. Technical assistance may be used in programs and made adaptable to program needs. The inclusion and evaluation of technical assistance, especially tailored approaches, is warranted for environmental interventions, including ECE settings.

A conceptual model to empower software requirements conflict detection and resolution with rule-based reasoning

NASA Astrophysics Data System (ADS)

Ahmad, Sabrina; Jalil, Intan Ermahani A.; Ahmad, Sharifah Sakinah Syed

2016-08-01

It is seldom technical issues which impede the process of eliciting software requirements. The involvement of multiple stakeholders usually leads to conflicts and therefore the need of conflict detection and resolution effort is crucial. This paper presents a conceptual model to further improve current efforts. Hence, this paper forwards an improved conceptual model to assist the conflict detection and resolution effort which extends the model ability and improves overall performance. The significant of the new model is to empower the automation of conflicts detection and its severity level with rule-based reasoning.

An analysis of information design and packaging for an inelastic market

NASA Technical Reports Server (NTRS)

Pinelli, T. E.; Mccullough, R.; Cordle, V. M.

1982-01-01

Producers of technical reports can increase the potential use of the technical report, as an information product, by making certain changes to the sequential, language, and presentation components. These improvements, which effect the overall design and packaging of the product, are discussed. These improvements are likely to have their greatest impact on the marginal technical report user. However, these improvements are not without economic consideration. For this reason, cost factors should be calculated to ensure that benefits to the user and/or increased utility will outweight the cost to the producer.

Technical report writing

NASA Technical Reports Server (NTRS)

Vidoli, Carol A.

1992-01-01

This manual covers the fundamentals of organizing, writing, and reviewing NASA technical reports. It was written to improve the writing skills of LeRC technical authors and the overall quality of their reports.

77 FR 27490 - Plant-Specific Adoption, Revision 4 of the Improved Standard Technical Specifications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-10

...,'' NUREG-1432, ``Standard Technical Specifications, Combustion Engineering Plants,'' NUREG-1433, ``Standard..., ``Standard Technical Specifications, Combustion Engineering Plants'' Revision 4, ADAMS Accession No..., Westinghouse Plants''.. NUREG-1432, ``Standard Technical ML12102A165 ML12102A169 Specifications, Combustion...

Level of Satisfaction Among People Living with HIV (PLHIV) Attending the HIV Clinic of Tertiary Care Center in Southern India

PubMed Central

Vahab, Sanoj Abdul; Ramapuram, John; Bhaskaran, Unnikrishnan; Achappa, Basavaprabhu

2016-01-01

Introduction Patient satisfaction is an important issue for the health care sector. Hospitals routinely collect patient satisfaction data so that they can improve the quality of their services. There is a dearth of research in the field of satisfaction among people living with HIV (PLHIV) in India. Aim The aim of our study was to determine the level of satisfaction among PLHIV attending the HIV clinic of tertiary health centre in Southern India. Materials and Methods This descriptive cross-sectional study was done in the HIV clinic attached to Kasturba Medical College (KMC) Hospital, Mangalore, India from August 2012 - August 2013. PLHIV of age more than 18 years were included. During the study period 422 consecutive patients who consented for the study were enrolled. To determine patient satisfaction towards healthcare service, we used the Short Form Patient Satisfaction Questionnaire (PSQ-18). Data was analysed using SPSS Version 11.5 statistical software. Results A total of 422 patients were included in the study out of whom 253(60%) were males and 169(40%) were females. Mean age of the patients was 37.08±7.2 years. The median CD4 count was 345 cells/mm3 (IQR 245-451.2). The mean score for general satisfaction was 4.43±0.48, for technical quality 4.77±0.26, for interpersonal manner 4.59±0.4, for communication 4.64±0.42, for financial aspects 3.20±0.78), for accessibility and convenience 4.50±0.72 and for time spent with the doctor was 4.59±0.45. Subscale scores for general satisfaction, technical quality, accessibility, interpersonal manner, finance and communication were higher in females when compared to males which were found to be statistically significant. Younger PLHIV (≤ 35 years) had significantly higher scores in technical quality, interpersonal manner and time spent with the doctor when compared to older PLHIV. Conclusion Patient satisfaction was highest for technical quality and it was lowest for financial aspects. If hospitals wish to improve the quality of health services they should give priority to decreasing costs and improving accessibility. PMID:27190859

The Centers for Disease Control and Prevention: Findings From The National Healthy Worksite Program

PubMed Central

Lang, Jason; Cluff, Laurie; Payne, Julianne; Matson-Koffman, Dyann; Hampton, Joel

2017-01-01

Objective To evaluate employers’ implementation of evidence-based interventions, and changes in employees’ behaviors associated with participating in the national healthy worksite program (NHWP). Methods NHWP recruited 100 small and mid-sized employers and provided training and support for 18 months. Outcome measures were collected with an employer questionnaire, an employee survey, and biometric data at baseline and 18 months later. Results The 41 employers who completed the NHWP implemented significantly more evidence-based interventions and had more comprehensive worksite health promotion programs after participating. Employees made significant improvements in physical activity and nutritional behaviors, but did not significantly improve employee weight. Conclusions Training and technical support can help small and mid-sized employers implement evidence-based health interventions to promote positive employee behavior changes. A longer follow up period may be needed to assess whether NHWP led to improvements in clinical outcomes. PMID:28594703

The Centers for Disease Control and Prevention: Findings From The National Healthy Worksite Program.

PubMed

Lang, Jason; Cluff, Laurie; Payne, Julianne; Matson-Koffman, Dyann; Hampton, Joel

2017-07-01

To evaluate employers' implementation of evidence-based interventions, and changes in employees' behaviors associated with participating in the national healthy worksite program (NHWP). NHWP recruited 100 small and mid-sized employers and provided training and support for 18 months. Outcome measures were collected with an employer questionnaire, an employee survey, and biometric data at baseline and 18 months later. The 41 employers who completed the NHWP implemented significantly more evidence-based interventions and had more comprehensive worksite health promotion programs after participating. Employees made significant improvements in physical activity and nutritional behaviors, but did not significantly improve employee weight. Training and technical support can help small and mid-sized employers implement evidence-based health interventions to promote positive employee behavior changes. A longer follow up period may be needed to assess whether NHWP led to improvements in clinical outcomes.

75 FR 34734 - Improving Market and Planning Efficiency Through Improved Software; Notice of Agenda and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-18

... Market and Planning Efficiency Through Improved Software; Notice of Agenda and Procedures for Staff Technical Conference June 10, 2010. This notice establishes the agenda and procedures for the staff[email protected] . Kimberly D. Bose, Secretary. Agenda for AD10-12 Staff Technical Conference on Enhanced Power...

The Development of Technical and Vocational Education in Malaysia--A Case Study in Quality Improvement. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Hee, Tieng Fok

The economic profile of Malaysia has changed from an economy mainly based on agriculture and the production of tin ore to a more balanced economy with continuing growth in the manufacturing and industrial sectors. Educational programs need to be upgraded and improved, particularly the direction and development of technical and vocational education…

Simulator-Based Angiography and Endovascular Neurosurgery Curriculum: A Longitudinal Evaluation of Performance Following Simulator-Based Angiography Training.

PubMed

Pannell, J Scott; Santiago-Dieppa, David R; Wali, Arvin R; Hirshman, Brian R; Steinberg, Jeffrey A; Cheung, Vincent J; Oveisi, David; Hallstrom, Jon; Khalessi, Alexander A

2016-08-29

This study establishes performance metrics for angiography and neuroendovascular surgery procedures based on longitudinal improvement in individual trainees with differing levels of training and experience. Over the course of 30 days, five trainees performed 10 diagnostic angiograms, coiled 10 carotid terminus aneurysms in the setting of subarachnoid hemorrhage, and performed 10 left middle cerebral artery embolectomies on a Simbionix Angio Mentor™ simulator. All procedures were nonconsecutive. Total procedure time, fluoroscopy time, contrast dose, heart rate, blood pressures, medications administered, packing densities, the number of coils used, and the number of stent-retriever passes were recorded. Image quality was rated, and the absolute value of technically unsafe events was recorded. The trainees' device selection, macrovascular access, microvascular access, clinical management, and the overall performance of the trainee was rated during each procedure based on a traditional Likert scale score of 1=fail, 2=poor, 3=satisfactory, 4=good, and 5=excellent. These ordinal values correspond with published assessment scales on surgical technique. After performing five diagnostic angiograms and five embolectomies, all participants demonstrated marked decreases in procedure time, fluoroscopy doses, contrast doses, and adverse technical events; marked improvements in image quality, device selection, access scores, and overall technical performance were additionally observed (p < 0.05). Similarly, trainees demonstrated marked improvement in technical performance and clinical management after five coiling procedures (p < 0.05). However, trainees with less prior experience deploying coils continued to experience intra-procedural ruptures up to the eighth embolization procedure; this observation likely corresponded with less tactile procedural experience to an exertion of greater force than appropriate for coil placement. Trainees across all levels of training and prior experience demonstrated a significant performance improvement after completion of our simulator curriculum consisting of five diagnostic angiograms, five embolectomy cases, and 10 aneurysm coil embolizations.

Reliable assessment of general surgeons' non-technical skills based on video-recordings of patient simulated scenarios.

PubMed

Spanager, Lene; Beier-Holgersen, Randi; Dieckmann, Peter; Konge, Lars; Rosenberg, Jacob; Oestergaard, Doris

2013-11-01

Nontechnical skills are essential for safe and efficient surgery. The aim of this study was to evaluate the reliability of an assessment tool for surgeons' nontechnical skills, Non-Technical Skills for Surgeons dk (NOTSSdk), and the effect of rater training. A 1-day course was conducted for 15 general surgeons in which they rated surgeons' nontechnical skills in 9 video recordings of scenarios simulating real intraoperative situations. Data were gathered from 2 sessions separated by a 4-hour training session. Interrater reliability was high for both pretraining ratings (Cronbach's α = .97) and posttraining ratings (Cronbach's α = .98). There was no statistically significant development in assessment skills. The D study showed that 2 untrained raters or 1 trained rater was needed to obtain generalizability coefficients >.80. The high pretraining interrater reliability indicates that videos were easy to rate and Non-Technical Skills for Surgeons dk easy to use. This implies that Non-Technical Skills for Surgeons dk (NOTSSdk) could be an important tool in surgical training, potentially improving safety and quality for surgical patients. Copyright © 2013 Elsevier Inc. All rights reserved.

An acceptable role for computers in the aircraft design process

NASA Technical Reports Server (NTRS)

Gregory, T. J.; Roberts, L.

1980-01-01

Some of the reasons why the computerization trend is not wholly accepted are explored for two typical cases: computer use in the technical specialties and computer use in aircraft synthesis. The factors that limit acceptance are traced in part, to the large resources needed to understand the details of computer programs, the inability to include measured data as input to many of the theoretical programs, and the presentation of final results without supporting intermediate answers. Other factors are due solely to technical issues such as limited detail in aircraft synthesis and major simplifying assumptions in the technical specialties. These factors and others can be influenced by the technical specialist and aircraft designer. Some of these factors may become less significant as the computerization process evolves, but some issues, such as understanding large integrated systems, may remain issues in the future. Suggestions for improved acceptance include publishing computer programs so that they may be reviewed, edited, and read. Other mechanisms include extensive modularization of programs and ways to include measured information as part of the input to theoretical approaches.

Effect of Rational Emotive Behavior Therapy on Negative Career Thoughts of Students in Technical Colleges in Nigeria.

PubMed

Ogbuanya, Theresa Chinyere; Eseadi, Chiedu; Orji, Chibueze Tobias; Anyanwu, Joy I; Ede, Moses Onyemaechi; Bakare, Jimoh

2018-04-01

Negative career thoughts are cognitive barriers that interfere with an individual's career decision-making and successful career development. The current study examined the effect of rational-emotive behavior therapy (REBT) on negative career thoughts of students in technical colleges in Nigeria. The study utilized a pretest-posttest control group design. One hundred and seventy-three participants from technical colleges in the Southeast zone of the country completed a measure of career thoughts at pretest, posttreatment, and follow-up: the College Students' Career Thoughts Scale. An REBT career program manual guided the intervention for 12 weeks. Data collected were analyzed using repeated-measures analysis of variance, chi-square, and t-test. Results show that the negative career thoughts of the REBT group participants were significantly reduced relative to a waitlist control group at the end of the intervention. Follow-up tests conducted after three months and six months revealed that the significant decrease in negative career thoughts of the REBT group participants was sustained. The outcomes of the current study suggest that REBT is an invaluable group therapy for assisting college students in overcoming negative thoughts associated with career choice and decision. It would be helpful if further longitudinal evaluation were implemented in Nigeria and in other countries to evaluate whether and how an REBT-based program can improve vocational maturity and vocational identity of technical college students.

Comparative analyses of different variants of standard ground for automatic control systems of technical processes of oil and gas production

NASA Astrophysics Data System (ADS)

Gromakov, E. I.; Gazizov, A. T.; Lukin, V. P.; Chimrov, A. V.

2017-01-01

The paper analyses efficiency (interference resistance) of standard TT, TN, IT networks in control links of automatic control systems (ACS) of technical processes (TP) of oil and gas production. Electromagnetic compatibility (EMC) is a standard term used to describe the interference in grounding circuits. Improved EMC of ACS TP can significantly reduce risks and costs of malfunction of equipment that could have serious consequences. It has been proved that an IT network is the best type of grounds for protection of ACS TP in real life conditions. It allows reducing the interference down to the level that is stated in standards of oil and gas companies.

Instrumentation and control of harmonic oscillators via a single-board microprocessor-FPGA device.

PubMed

Picone, Rico A R; Davis, Solomon; Devine, Cameron; Garbini, Joseph L; Sidles, John A

2017-04-01

We report the development of an instrumentation and control system instantiated on a microprocessor-field programmable gate array (FPGA) device for a harmonic oscillator comprising a portion of a magnetic resonance force microscope. The specific advantages of the system are that it minimizes computation, increases maintainability, and reduces the technical barrier required to enter the experimental field of magnetic resonance force microscopy. Heterodyne digital control and measurement yields computational advantages. A single microprocessor-FPGA device improves system maintainability by using a single programming language. The system presented requires significantly less technical expertise to instantiate than the instrumentation of previous systems, yet integrity of performance is retained and demonstrated with experimental data.

Instrumentation and control of harmonic oscillators via a single-board microprocessor-FPGA device

NASA Astrophysics Data System (ADS)

Picone, Rico A. R.; Davis, Solomon; Devine, Cameron; Garbini, Joseph L.; Sidles, John A.

2017-04-01

We report the development of an instrumentation and control system instantiated on a microprocessor-field programmable gate array (FPGA) device for a harmonic oscillator comprising a portion of a magnetic resonance force microscope. The specific advantages of the system are that it minimizes computation, increases maintainability, and reduces the technical barrier required to enter the experimental field of magnetic resonance force microscopy. Heterodyne digital control and measurement yields computational advantages. A single microprocessor-FPGA device improves system maintainability by using a single programming language. The system presented requires significantly less technical expertise to instantiate than the instrumentation of previous systems, yet integrity of performance is retained and demonstrated with experimental data.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Das, Raj, E-mail: rajdas@nhs.net, E-mail: raj.das@stgeorges.nhs.uk; Lucatelli, Pierleone, E-mail: pierleone.lucatelli@gmail.com; Wang, Haofan, E-mail: wwhhff123@gmail.com

AimA clear understanding of operator experience is important in improving technical success whilst minimising patient risk undergoing endovascular procedures, and there is the need to ensure that trainees have the appropriate skills as primary operators. The aim of the study is to retrospectively analyse uterine artery embolisation (UAE) procedures performed by interventional radiology (IR) trainees at an IR training unit analysing fluoroscopy times and radiation dose as surrogate markers of technical skill.MethodsTen IR fellows were primary operator in 200 UAE procedures over a 5-year period. We compared fluoroscopy times, radiation dose and complications, after having them categorised according to threemore » groups: Group 1, initial five, Group 2, >5 procedures and Group 3, penultimate five UAE procedures. We documented factors that may affect screening time (number of vials employed and use of microcatheters).ResultsMean fluoroscopy time was 18.4 (±8.1), 17.3 (±9.0), 16.3 (±8.4) min in Groups 1, 2 and 3, respectively. There was no statistically significant difference between these groups (p > 0.05) with respect to fluoroscopy time or radiation dose. Analysis after correction for confounding factors showed no statistical significance (p > 0.05). All procedures were technically successful, and total complication rate was 4 %.ConclusionUAE was chosen as a highly standardised procedure followed by IR practitioners. Although there is a non-significant trend for shorter screening times with experience, technical success and safety were not compromised with appropriate Consultant supervision, which illustrates a safe construct for IR training. This is important and reassuring information for patients undergoing a procedure in a training unit.« less

Reducing Vehicle Weight and Improving U.S. Energy Efficiency Using Integrated Computational Materials Engineering

NASA Astrophysics Data System (ADS)

Joost, William J.

2012-09-01

Transportation accounts for approximately 28% of U.S. energy consumption with the majority of transportation energy derived from petroleum sources. Many technologies such as vehicle electrification, advanced combustion, and advanced fuels can reduce transportation energy consumption by improving the efficiency of cars and trucks. Lightweight materials are another important technology that can improve passenger vehicle fuel efficiency by 6-8% for each 10% reduction in weight while also making electric and alternative vehicles more competitive. Despite the opportunities for improved efficiency, widespread deployment of lightweight materials for automotive structures is hampered by technology gaps most often associated with performance, manufacturability, and cost. In this report, the impact of reduced vehicle weight on energy efficiency is discussed with a particular emphasis on quantitative relationships determined by several researchers. The most promising lightweight materials systems are described along with a brief review of the most significant technical barriers to their implementation. For each material system, the development of accurate material models is critical to support simulation-intensive processing and structural design for vehicles; improved models also contribute to an integrated computational materials engineering (ICME) approach for addressing technical barriers and accelerating deployment. The value of computational techniques is described by considering recent ICME and computational materials science success stories with an emphasis on applying problem-specific methods.

Assessing Students' Technical Skill Attainment

ERIC Educational Resources Information Center

Jorgensen, Haley

2010-01-01

The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

Operational Suitability Guide. Volume 2. Templates

DTIC Science & Technology

1990-05-01

Intended mission, and the required technical and operational characteristics. The mission must be adequately defined and key hardware and software ...operational availability. With the use of fault-tolerant computer hardware and software , the system R&M will significantly improve end-to-end...should Include both hardware and software elements, as appropriate. Unique characteristics or unique support concepts should be Identified if they result

Paying It Forward: A Technical Assistance Guide for Developing and Implementing Performance-Based Scholarships. The Performance-Based Scholarship Demonstration

ERIC Educational Resources Information Center

Welbeck, Rashida; Ware, Michelle; Cerna, Oscar; Valenzuela, Ireri

2014-01-01

Difficulties in paying for college and in maintaining good academic performance are two major hurdles to college graduation for low-income students. In recent years, state and federal budgets for postsecondary education have been cut significantly, limiting the options policymakers, education leaders, and communities have to improve rates of…

The Development of Metal Oxide Chemical Sensing Nanostructures

NASA Technical Reports Server (NTRS)

Hunter, G. W.; VanderWal,R. L.; Xu, J. C.; Evans, L. J.; Berger, G. M.; Kulis, M. J.

2008-01-01

This paper discusses sensor development based on metal oxide nanostructures and microsystems technology. While nanostructures such as nanowires show significant potential as enabling materials for chemical sensors, a number of significant technical challenges remain. This paper discusses development to address each of these technical barriers: 1) Improved contact and integration of the nanostructured materials with microsystems in a sensor structure; 2) Control of nanostructure crystallinity to allow control of the detection mechanism; and 3) Widening the range of gases that can be detected by fabricating multiple nanostructured materials. A sensor structure composed of three nanostructured oxides aligned on a single microsensor has been fabricated and tested. Results of this testing are discussed and future development approaches are suggested. It is concluded that while this work lays the foundation for further development, these are the beginning steps towards realization of repeatable, controlled sensor systems using oxide based nanostructures.

First Steps in the Smart Grid Framework: An Optimal and Feasible Pathway Toward Power System Reform in Mexico

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bracho, Riccardo; Linvill, Carl; Sedano, Richard

With the vision to transform the power sector, Mexico included in the new laws and regulations deployment of smart grid technologies and provided various attributes to the Ministry of Energy and the Energy Regulatory Commission to enact public policies and regulation. The use of smart grid technologies can have a significant impact on the integration of variable renewable energy resources while maintaining reliability and stability of the system, significantly reducing technical and non-technical electricity losses in the grid, improving cyber security, and allowing consumers to make distributed generation and demand response decisions. This report describes for Mexico's Ministry of Energymore » (SENER) an overall approach (Optimal Feasible Pathway) for moving forward with smart grid policy development in Mexico to enable increasing electric generation from renewable energy in a way that optimizes system stability and reliability in an efficient and cost-effective manner.« less

Regeneration of glass nanofluidic chips through a multiple-step sequential thermochemical decomposition process at high temperatures.

PubMed

Xu, Yan; Wu, Qian; Shimatani, Yuji; Yamaguchi, Koji

2015-10-07

Due to the lack of regeneration methods, the reusability of nanofluidic chips is a significant technical challenge impeding the efficient and economic promotion of both fundamental research and practical applications on nanofluidics. Herein, a simple method for the total regeneration of glass nanofluidic chips was described. The method consists of sequential thermal treatment with six well-designed steps, which correspond to four sequential thermal and thermochemical decomposition processes, namely, dehydration, high-temperature redox chemical reaction, high-temperature gasification, and cooling. The method enabled the total regeneration of typical 'dead' glass nanofluidic chips by eliminating physically clogged nanoparticles in the nanochannels, removing chemically reacted organic matter on the glass surface and regenerating permanent functional surfaces of dissimilar materials localized in the nanochannels. The method provides a technical solution to significantly improve the reusability of glass nanofluidic chips and will be useful for the promotion and acceleration of research and applications on nanofluidics.

Intensive skills week for military medical students increases technical proficiency, confidence, and skills to minimize negative stress.

PubMed

Mueller, Genevieve; Hunt, Bonnie; Wall, Van; Rush, Robert; Molof, Alan; Schoeff, Jonathan; Wedmore, Ian; Schmid, James; Laporta, Anthony

2012-01-01

The effects of stress induced cortisol on learning and memory is well documented in the literature.1-3 Memory and learning are enhanced at low levels while high levels are detrimental. Repetitive training in stressful situations enables management of the stress response4 as demonstrated by the high intensity training military members undergo to prepare for tactical situations. Appropriate management of one?s stress response is critical in the medical field, as the negative effects of stress can potentially hinder life-saving procedures and treatments. This also applies to physicians-in-training as they learn and practice triage, emergency medicine, and surgical skills prior to graduation. Rocky Vista University?s Military Medicine Honor?s Track (MMHT) held a week long high-intensity emergency medicine and surgical Intensive Skills Week (ISW), facilitated by military and university physicians, to advance students? skills and maximize training using the Human Worn Partial Surgical Task Simulator (Cut Suit). The short-term goal of the ISW was to overcome negative stress responses to increase confidence, technical and non-technical knowledge, and skill in surgery and emergency medicine in an effort to improve performance as third-year medical students. The long-term goal was to enhance performance and proficiency in residency and future medical practice. The metrics for the short-term goals were the focus of this pilot study. Results show an increase in confidence and decrease in perceived stress as well as statistically significant improvements in technical and non-technical skills and surgical instrumentation knowledge throughout the week. There is a correlative benefit to physician and non-physician military personnel, especially Special Operations Forces (SOF) medical personnel, from developing and implementing similar training programs when live tissue or cadaver models are unavailable or unfeasible. 2012.

Involvement of Technical Reasoning More Than Functional Knowledge in Development of Tool Use in Childhood

PubMed Central

Remigereau, Chrystelle; Roy, Arnaud; Costini, Orianne; Osiurak, François; Jarry, Christophe; Le Gall, Didier

2016-01-01

It is well-known that even toddlers are able to manipulate tools in an appropriate manner according to their physical properties. The ability of children to make novel tools in order to solve problems is, however, surprisingly limited. In adults, mechanical problem solving (MPS) has been proposed to be supported by “technical reasoning skills,” which are thought to be involved in every situation requiring the use of a tool (whether conventional or unusual). The aim of this study was to investigate the typical development of real tool use (RTU) skills and its link with technical reasoning abilities in healthy children. Three experimental tasks were adapted from those used with adults: MPS (three different apparatus), RTU (10 familiar tool-object pairs), and functional knowledge (FK; 10 functional picture matching with familiar tools previously used). The tasks were administered to 85 healthy children divided into six age groups (from 6 to 14 years of age). The results revealed that RTU (p = 0.01) and MPS skills improve with age, even if this improvement differs according to the apparatus for the latter (p < 0.01 for the Hook task and p < 0.05 for the Sloping task). Results also showed that MPS is a better predictor of RTU than FK, with a significant and greater weight (importance weight: 0.65; Estimate ± Standard Error: 0.27 ± 0.08). Ours findings suggest that RTU and technical reasoning develop jointly in children, independently from development of FK. In addition, technical reasoning appears partially operative from the age of six onward, even though the outcome of these skills depends of the context in which they are applied (i.e., the type of apparatus). PMID:27877141

75 FR 30387 - Improving Market and Planning Efficiency Through Improved Software; Notice of Agenda and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-01

... Market and Planning Efficiency Through Improved Software; Notice of Agenda and Procedures for Staff... planning models and software. The technical conference will be held from 8 a.m. to 5:30 p.m. (EDT) on June.... Agenda for AD10-12 Staff Technical Conference on Planning Models and Software Federal Energy Regulatory...

External Technical Support for School Improvement: Critical Issues from the Chilean Experience

ERIC Educational Resources Information Center

Osses, Alejandra; Bellei, Cristián; Valenzuela, Juan Pablo

2015-01-01

To what extent school improvement processes can be initiated and sustained from the outside has been a relevant question for policy-makers seeking to increase quality in education. Since 2008, the Chilean Government is strongly promoting the use of external technical support (ETS) services to support school improvement processes, as part of the…

Upgrades for the CMS simulation

DOE PAGES

Lange, D. J.; Hildreth, M.; Ivantchenko, V. N.; ...

2015-05-22

Over the past several years, the CMS experiment has made significant changes to its detector simulation application. The geometry has been generalized to include modifications being made to the CMS detector for 2015 operations, as well as model improvements to the simulation geometry of the current CMS detector and the implementation of a number of approved and possible future detector configurations. These include both completely new tracker and calorimetry systems. We have completed the transition to Geant4 version 10, we have made significant progress in reducing the CPU resources required to run our Geant4 simulation. These have been achieved throughmore » both technical improvements and through numerical techniques. Substantial speed improvements have been achieved without changing the physics validation benchmarks that the experiment uses to validate our simulation application for use in production. As a result, we will discuss the methods that we implemented and the corresponding demonstrated performance improvements deployed for our 2015 simulation application.« less

A comparison of the toxicity of synergized and technical formulations of permethrin, sumithrin, and resmethrin to trout.

PubMed

Paul, E A; Simonin, H A; Tomajer, T M

2005-02-01

Synthetic pyrethroids often have synergists added to improve effectiveness, yet decisions regarding the use of these pesticides are often based upon toxicity tests using technical material without the synergist, piperonyl butoxide. We conducted toxicity tests with brook trout (Salvelinus fontinalis) and brown trout (Salmo trutta) to compare the toxicity of synergized and technical formulations of permethrin, sumithrin, and resmethrin. We found a significant increase in toxicity in the synergized permethrin formulation using traditional 24, 48, and 96-h tests, relative to tests with the technical formulation. However, there was little difference in toxicity between synergized and technical sumithrin until 48 h had elapsed. Many test fish were strongly intoxicated by either formulation of permethrin or sumithrin, but the synergized formulations of both chemicals affected fish at lower concentrations. Intoxication was potentially severe enough to reduce the survival of these fish in the wild. Following short (6-h) exposures, we also found a larger difference in the number of fish that died or became intoxicated between the synergized and technical formulations of permethrin and sumithrin. Finally, we tested the ability of exposed fish to swim against a current. Fish exposed for 6 h to synergized permethrin and resmethrin had far less swimming stamina than those exposed to technical formulations. We found no difference in the effect on swimming between the synergized and technical formulation of sumithrin. In general, the synergized formulations of these chemicals appeared to cause a faster response than the technical formulations. This response increases the lethal and sublethal impacts of the insecticides. We also found that sumithrin was the least toxic of the three pyrethroids. Since the maximum application rate of sumithrin is half that of the other two pyrethroids, the potential risk to wild trout in streams may be reduced.

A New Stage in the Development of Secondary Vocational-Technical Schools

ERIC Educational Resources Information Center

Sedakov, V.

1977-01-01

Recommends that projected growth in the technical-vocational sector of education in the Soviet Union be accompanied by qualitative improvements in areas of political socialization, cultural transmission, and technical development. (Author/DB)

Technical Assistance and Changes in Nutrition and Physical Activity Practices in the National Early Care and Education Learning Collaboratives Project, 2015–2016

PubMed Central

Smith, Teresa M.; Estabrooks, Paul A.; Rasmussen, Cristy Geno; Blaser, Casey; Yaroch, Amy L

2018-01-01

Purpose and Objectives The National Early Care and Education Learning Collaboratives Project (ECELC) aims to improve best practices in early care and education (ECE) programs in topic areas of the Nutrition and Physical Activity Self-Assessment in Child Care (NAP SACC). Technical assistance is a component of the ECELC, yet its effect on outcomes is unclear. Beyond dose and duration of technical assistance, limited research exists on characteristics of technical assistance that contribute to outcomes. The objective of this study was to identify and describe technical assistance characteristics and explore associations with NAP SACC outcomes. Intervention Approach We collected data from 10 collaboratives comprising 84 ECE programs in 2 states in 2015–2016. The objective of technical assistance was to support programs in improving best practices. Technical assistance was provided to programs via on-site, telephone, or email and was tailored to program needs. Evaluation Methods We used a mixed-methods design to examine associations between technical assistance and NAP SACC outcomes. We used multiple regression analysis to assess quantitative data and qualitative comparative analysis to determine necessary and sufficient technical assistance conditions supporting NAP SACC outcomes. We also conducted a document review to describe technical assistance that referred conditions identified by the qualitative comparative analysis. Results Regression analyses detected an inverse relationship between changes in NAP SACC scores and hours of technical assistance. No clear pattern emerged in the qualitative comparative analysis, leaving no necessary and sufficient conditions. However, the qualitative comparative analysis identified feedback as a potentially important component of technical assistance, whereas resource sharing and frequent email were characteristics that seemed to reduce the likelihood of improved outcomes. Email and resource sharing were considered primarily general information rather than tailored technical assistance. Implications for Public Health Technical assistance may be used in programs and made adaptable to program needs. The inclusion and evaluation of technical assistance, especially tailored approaches, is warranted for environmental interventions, including ECE settings. PMID:29704371

Farm-economic analysis of reducing antimicrobial use whilst adopting improved management strategies on farrow-to-finish pig farms.

PubMed

Rojo-Gimeno, Cristina; Postma, Merel; Dewulf, Jeroen; Hogeveen, Henk; Lauwers, Ludwig; Wauters, Erwin

2016-07-01

Due to increasing public health concerns that food animals could be reservoirs for antibiotic resistant organisms, calls for reduced current antibiotic use on farms are growing. Nevertheless, it is challenging for farmers to perform this reduction without negatively affecting technical and economic performance. As an alternative, improved management practices based on biosecurity and vaccinations have been proven useful to reduce antimicrobial use without lowering productivity, but issues with insufficient experimental design possibilities have hindered economic analysis. In the present study a quasi-experimental approach was used for assessing the economic impact of reduction of antimicrobial use coupled with improved management strategies, particularly biosecurity strategies. The research was performed on farrow-to-finish pig farms in Flanders (northern region of Belgium). First, to account for technological progress and to avoid selection bias, propensity score analysis was used to compare data on technical parameters. The treatment group (n=48) participated in an intervention study whose aim was to improve management practices to reduce the need for use of antimicrobials. Before and after the change in management, data were collected on the technical parameters, biosecurity status, antimicrobial use, and vaccinations. Treated farms were matched without replacement with control farms (n=69), obtained from the Farm Accountancy Data Network, to estimate the difference in differences (DID) of the technical parameters. Second, the technical parameters' DID, together with the estimated costs of the management intervention and the price volatility of the feed, meat of the finisher pigs, and piglets served as a basis for modelling the profit of 11 virtual farrow-to-finish pig farms representative of the Flemish sector. Costs incurred by new biosecurity measures (median +€3.96/sow/year), and new vaccinations (median €0.00/sow/year) did not exceed the cost reduction achieved by lowering the use of antimicrobials (median -€7.68/sow/year). No negative effect on technical parameters was observed and mortality of the finishers was significantly reduced by -1.1%. Even after a substantial reduction of the antimicrobial treatments, the difference of the enterprise profit increased by +€2.67/finisher pig/year after implementing the interventions. This result proved to be robust after stochastic modelling of input and output price volatility. The results of this study can be used by veterinarians and other stakeholders to incentivise managers of farrow-to-finish operations to use biosecurity practices as a cost-effective way to reduce antimicrobial use. Copyright © 2016 Elsevier B.V. All rights reserved.

Comprehensive Surgical Coaching Enhances Surgical Skill in the Operating Room: A Randomized Controlled Trial.

PubMed

Bonrath, Esther M; Dedy, Nicolas J; Gordon, Lauren E; Grantcharov, Teodor P

2015-08-01

The aim of the study was to determine whether individualized coaching improved surgical technical skill in the operating room to a higher degree than current residency training. Clinical training in the operating room is a valuable opportunity for surgeons to acquire skill and knowledge; however, it often remains underutilized. Coaching has been successfully used in various industries to enhance performance, but its role in surgery has been insufficiently investigated. This randomized controlled trial was conducted at one surgical training program. Trainees undergoing a minimally invasive surgery rotation were randomized to either conventional training (CT) or comprehensive surgical coaching (CSC). CT included ward and operating room duties, and regular departmental teaching sessions. CSC comprised performance analysis, debriefing, feedback, and behavior modeling. Primary outcome measures were technical performance as measured on global and procedure-specific rating scales, and surgical safety parameters, measured by error count. Operative performance was assessed by blinded video analysis of the first and last cases recorded by the participants during their rotation. Twenty residents were randomized and 18 completed the study. At posttraining the CSC group (n = 9) scored significantly higher on a procedure-specific skill scale compared with the CT group (n = 9) [median, 3.90 (interquartile range, 3.68-4.30) vs 3.60 (2.98-3.70), P = 0.017], and made fewer technical errors [10 (7-13) vs 18 (13-21), P = 0.003]. Significant within-group improvements for all skill metrics were only noted in the CSC group. Comprehensive surgical coaching enhances surgical training and results in skill acquisition superior to conventional training.

Simulator training and non-technical factors improve laparoscopic performance among OBGYN trainees.

PubMed

Ahlborg, Liv; Hedman, Leif; Nisell, Henry; Felländer-Tsai, Li; Enochsson, Lars

2013-10-01

To investigate how simulator training and non-technical factors affect laparoscopic performance among residents in obstetrics and gynecology. In this prospective study, trainees were randomized into three groups. The first group was allocated to proficiency-based training in the LapSimGyn(®) virtual reality simulator. The second group received additional structured mentorship during subsequent laparoscopies. The third group served as control group. At baseline an operation was performed and visuospatial ability, flow and self-efficacy were assessed. All groups subsequently performed three tubal occlusions. Self-efficacy and flow were assessed before and/or after each operation. Simulator training was conducted at the Center for Advanced Medical Simulation and Training, Karolinska University Hospital. Sterilizations were performed at each trainee's home clinic. Twenty-eight trainees/residents from 21 hospitals in Sweden were included. Visuospatial ability was tested by the Mental Rotation Test-A. Flow and self-efficacy were assessed by validated scales and questionnaires. Laparoscopic performance was measured as the duration of surgery. Visuospatial ability, self-efficacy and flow were correlated to the laparoscopic performance using Spearman's correlations. Differences between groups were analyzed by the Mann-Whitney U-test. No differences across groups were detected at baseline. Self-efficacy scores before and flow scores after the third operation were significantly higher in the trained groups. Duration of surgery was significantly shorter in the trained groups. Flow and self-efficacy correlate positively with laparoscopic performance. Simulator training and non-technical factors appear to improve the laparoscopic performance among trainees/residents in obstetrics and gynecology. © 2013 Nordic Federation of Societies of Obstetrics and Gynecology.

Direct Stenting in Patients with Acute Lower Limb Arterial Occlusions: Immediate and Long-Term Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Galanakis, Nikolaos; Kontopodis, Nikolaos; Peteinarakis, Ioannis

PurposeThe purpose of this study is to accentuate the efficacy of direct stenting (stent placement without predilatation of the lesion) in patients with acute lower limb arterial ischemia (ALLI).Materials and MethodsBetween January 2010 and September 2015, 16 patients (11 men and 5 women) underwent direct stenting of acute arterial occlusions. All patients had contraindication for surgical revascularization or catheter-directed thrombolysis. According to SVS/ISCVS Classification, six patients had IIa and ten patients IIb ALLI. The occlusions were located in CIA, EIA, SFA, or popliteal artery. Mean follow-up time with clinical examination and color Duplex ultrasonography was 37.6 months (range 1–72). We analyzedmore » the technical and clinical outcomes of the procedures, as well the complications and patency rates.ResultsTechnical success was achieved in all patients (16/16) and there was significant clinical improvement in 15 patients. There was neither distal embolization nor procedure-related complications. During the 6 years of follow-up, four patients died due to non-procedure-related causes and there were two minor and one major amputations. The primary patency rates and the amputation-free survival rates were 93.7 and 87% at 1 year, 75.2 and 71.2% at 3 years, and 75.2 and 62.3%, respectively, at 6 years.ConclusionsDirect stenting may be a valuable alternative procedure for acute arterial occlusions in selected cases with high technical success and significant clinical improvement.Level of EvidenceLevel 4, Case Series.« less

OB/GYN boot cAMP using high-fidelity human simulators: enhancing residents' perceived competency, confidence in taking a leadership role, and stress hardiness.

PubMed

Pliego, Jose F; Wehbe-Janek, Hania; Rajab, M Hasan; Browning, Jeff L; Fothergill, Russell E

2008-01-01

To evaluate the effectiveness of an obstetrical and gynecologic (Ob/Gyn) Boot Camp simulation training on perceived technical competency, confidence in a leadership role, and stress hardiness of resident training. We conducted a prospective pilot study on the effectiveness of an Ob/Gyn Boot Camp on resident training. Residents participated in an intensive immersion in clinical simulation of common obstetrical emergencies including shoulder dystocia, neonatal resuscitation, postpartum hemorrhage, and ruptured ectopic pregnancy. After the training, residents completed a Web-based survey on their perceptions of how the Ob/Gyn Boot Camp affected their 1) technical competency in the assessment and management of their patients, 2) confidence in taking a leadership role, and 3) stress hardiness. Residents rated their perceptions on a Likert scale of 1 to 5, 1 = poor to 5 = excellent. Twenty-three (14 Ob/Gyn and 9 family medicine) residents participated in this pilot study. Eighteen (78%) residents completed the online survey; 4 Ob/Gyn and 1 family medicine resident did not complete the survey. The residents reported that the simulation training stimulated an interest in learning key skills for obstetrical and gynecologic emergencies. Ob/Gyn residents reported significant improvement in their perceived technical competence and stress hardiness after the Boot Camp. However both Ob/Gyn and family medicine residents reported no significant improvement of confidence in their leadership abilities during obstetrical emergencies after the Boot Camp. Boot Camp simulation training early in the curriculum has the potential for enhancing residents' self-assessments of confidence, competency, and stress hardiness in managing obstetrical emergencies.

Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010–2013 national accident reports

PubMed Central

Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

2017-01-01

Objectives We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Design Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. Setting A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. Primary and secondary outcome measures The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Results Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Conclusions Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be especially relevant. PMID:28209605

Technical editing of research reports in biomedical journals.

PubMed

Wager, Elizabeth; Middleton, Philippa

2008-10-08

Most journals try to improve their articles by technical editing processes such as proof-reading, editing to conform to 'house styles', grammatical conventions and checking accuracy of cited references. Despite the considerable resources devoted to technical editing, we do not know whether it improves the accessibility of biomedical research findings or the utility of articles. This is an update of a Cochrane methodology review first published in 2003. To assess the effects of technical editing on research reports in peer-reviewed biomedical journals, and to assess the level of accuracy of references to these reports. We searched The Cochrane Library Issue 2, 2007; MEDLINE (last searched July 2006); EMBASE (last searched June 2007) and checked relevant articles for further references. We also searched the Internet and contacted researchers and experts in the field. Prospective or retrospective comparative studies of technical editing processes applied to original research articles in biomedical journals, as well as studies of reference accuracy. Two review authors independently assessed each study against the selection criteria and assessed the methodological quality of each study. One review author extracted the data, and the second review author repeated this. We located 32 studies addressing technical editing and 66 surveys of reference accuracy. Only three of the studies were randomised controlled trials. A 'package' of largely unspecified editorial processes applied between acceptance and publication was associated with improved readability in two studies and improved reporting quality in another two studies, while another study showed mixed results after stricter editorial policies were introduced. More intensive editorial processes were associated with fewer errors in abstracts and references. Providing instructions to authors was associated with improved reporting of ethics requirements in one study and fewer errors in references in two studies, but no difference was seen in the quality of abstracts in one randomised controlled trial. Structuring generally improved the quality of abstracts, but increased their length. The reference accuracy studies showed a median citation error rate of 38% and a median quotation error rate of 20%. Surprisingly few studies have evaluated the effects of technical editing rigorously. However there is some evidence that the 'package' of technical editing used by biomedical journals does improve papers. A substantial number of references in biomedical articles are cited or quoted inaccurately.

Well, you have hepatic metastases: Use of technical language by medical students in simulated patient interviews.

PubMed

Bourquin, Céline; Stiefel, Friedrich; Mast, Marianne Schmid; Bonvin, Raphael; Berney, Alexandre

2015-03-01

This research explored medical students' use and perception of technical language in a practical training setting to enhance skills in breaking bad news in oncology. Terms potentially confusing to laypeople were selected from 108 videotaped interviews conducted in an undergraduate Communication Skills Training. A subset of these terms was included in a questionnaire completed by students (N=111) with the aim of gaining insight into their perceptions of different speech registers and of patient understanding. Excerpts of interviews were analyzed qualitatively to investigate students' communication strategies with respect to these technical terms. Fewer than half of the terms were clarified. Students checked for simulated patients' understanding of the terms palliative and metastasis/to metastasize in 22-23% of the interviews. The term ambulatory was spontaneously explained in 75% of the interviews, hepatic and metastasis/to metastasize in 22-24%. Most provided explanations were in plain language; metastasis/to metastasize and ganglion/ganglionic were among terms most frequently explained in technical language. A significant number of terms potentially unfamiliar and confusing to patients remained unclarified in training interviews conducted by senior medical students, even when they perceived the terms as technical. This exploration may offer important insights for improving future physicians' skills. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Mental practice enhances surgical technical skills: a randomized controlled study.

PubMed

Arora, Sonal; Aggarwal, Rajesh; Sirimanna, Pramudith; Moran, Aidan; Grantcharov, Teodor; Kneebone, Roger; Sevdalis, Nick; Darzi, Ara

2011-02-01

To assess the effects of mental practice on surgical performance. Increasing concerns for patient safety have highlighted a need for alternative training strategies outside the operating room. Mental practice (MP), "the cognitive rehearsal of a task before performance," has been successful in sport and music to enhance skill. This study investigates whether MP enhances performance in laparoscopic surgery. After baseline skills testing, 20 novice surgeons underwent training on an evidence-based virtual reality curriculum. After randomization using the closed envelope technique, all participants performed 5 Virtual Reality (VR) laparoscopic cholecystectomies (LC). Mental practice participants performed 30 minutes of MP before each LC; control participants viewed an online lecture. Technical performance was assessed using video Objective Structured Assessment of Technical Skills-based global ratings scale (scored from 7 to 35). Mental imagery was assessed using a previously validated Mental Imagery Questionnaire. Eighteen participants completed the study. There were no intergroup differences in baseline technical ability. Learning curves were demonstrated for both MP and control groups. Mental practice was superior to control (global ratings) for the first LC (median 20 vs 15, P = 0.005), second LC (20.5 vs 13.5, P = 0.001), third LC (24 vs 15.5, P < 0.001), fourth LC (25.5 vs 15.5, P < 0.001) and the fifth LC (27.5 vs 19.5, P = 0.00). The imagery for the MP group was also significantly superior to the control group across all sessions (P < 0.05). Improved imagery significantly correlated with better quality of performance (ρ 0.51–0.62, Ps < 0.05). This is the first randomized controlled study to show that MP enhances the quality of performance based on VR laparoscopic cholecystectomy. This may be a time- and cost-effective strategy to augment traditional training in the OR thus potentially improving patient care.

37 CFR 1.105 - Requirements for information.

Code of Federal Regulations, 2010 CFR

2010-07-01

... databases: The existence of any particularly relevant commercial database known to any of the inventors that... improvement, identification of what is being improved. (vii) In use: Identification of any use of the claimed... the use. (viii) Technical information known to applicant. Technical information known to applicant...

Improving the 'how' and 'what' decisions of elite table tennis players.

PubMed

Raab, Markus; Masters, Rich S W; Maxwell, Jonathan P

2005-06-01

Training methods in sport usually focus on improving either technical or tactical aspects of performance, ignoring the fact that successful performance requires the athlete to simultaneously decide what movement to perform and how it should be executed. Young elite table tennis players were trained, in a first phase, to improve their forehand and backhand movements and, in a second phase, to make a tactical switch between forehand and backhand movements. Half of the players took part in behavioral training focusing on how to perform the required movements, whereas half received additional video feedback about their technical and tactical performance (decision training). The results indicate that improvements of how decisions (techniques) and what decisions (tactics) can occur as a consequence of combining technical and tactical training. These results were stable in delayed Post-test analyses of competitive matches. It was concluded that a combination of both technical and tactical training is beneficial to elite table tennis performers, particularly during early seasonal training programs.

Mechanistic and Technical Challenges in Studying the Human Microbiome and Cancer Epidemiology.

PubMed

Verma, Mukesh

2017-04-01

This article reviews the significance of the microbiome in cancer epidemiology, mechanistic and technical challenges in the field, and characterization of the microbiome in different tumor types to identify biomarkers of risk, progression, and prognosis. Publications on the microbiome and cancer epidemiology were reviewed to analyze sample collection and processing, microbiome taxa characterization by 16S ribosomal RNA sequencing, and microbiome metabolite characterization (metabotyping) by nuclear magnetic resonance and mass spectrometry. The analysis identified methodology types, research design, sample types, and issues in integrating data from different platforms. Aerodigestive cancer epidemiology studies conducted by different groups demonstrated the significance of microbiome information in developing approaches to improve health. Challenges exist in sample preparation and processing (eg, standardization of methods for collection and analysis). These challenges relate to technology, data integration from "omics" studies, inherent bias in primer selection during 16S ribosomal RNA sequencing, the need for large consortia with well-characterized biospecimens, cause and effect issues, resilience of microbiota to exposure events (requires longitudinal studies), and expanding studies for fungal and viral diversity (most studies used bacterial 16S ribosomal RNA sequencing for microbiota characterization). Despite these challenges, microbiome and cancer epidemiology studies are significant and may facilitate cancer risk assessment, diagnosis, and prognosis. In the future, clinical trials likely will use microbiota modifications to improve the efficacy of existing treatments.

Mechanistic and Technical Challenges in Studying the Human Microbiome and Cancer Epidemiology

PubMed Central

2016-01-01

This article reviews the significance of the microbiome in cancer epidemiology, mechanistic and technical challenges in the field, and characterization of the microbiome in different tumor types to identify biomarkers of risk, progression, and prognosis. Publications on the microbiome and cancer epidemiology were reviewed to analyze sample collection and processing, microbiome taxa characterization by 16S ribosomal RNA sequencing, and microbiome metabolite characterization (metabotyping) by nuclear magnetic resonance and mass spectrometry. The analysis identified methodology types, research design, sample types, and issues in integrating data from different platforms. Aerodigestive cancer epidemiology studies conducted by different groups demonstrated the significance of microbiome information in developing approaches to improve health. Challenges exist in sample preparation and processing (eg, standardization of methods for collection and analysis). These challenges relate to technology, data integration from “omics” studies, inherent bias in primer selection during 16S ribosomal RNA sequencing, the need for large consortia with well-characterized biospecimens, cause and effect issues, resilience of microbiota to exposure events (requires longitudinal studies), and expanding studies for fungal and viral diversity (most studies used bacterial 16S ribosomal RNA sequencing for microbiota characterization). Despite these challenges, microbiome and cancer epidemiology studies are significant and may facilitate cancer risk assessment, diagnosis, and prognosis. In the future, clinical trials likely will use microbiota modifications to improve the efficacy of existing treatments. PMID:27121074

Mobilization and Defense Management Technical Reports Series. The Impact of OSHA (Occupational Safety and Health Administration) and EPA (Environmental Protection Agency) on Defense Industry and the Implications for Mobilization.

DTIC Science & Technology

1983-05-01

mat of the voluntary standards thean in existence (JASI and NVA standards, for wcmmle). fwue affected the broad spectrum of Nm rican industry. As OBIA ...have been funded. As OMA matured, programs, standards, and inspections were significantly improved and gained industry aeptance. OBIA has deleted many

Final Technical Report: Advanced Measurement and Analysis of PV Derate Factors.

DOE Office of Scientific and Technical Information (OSTI.GOV)

King, Bruce Hardison; Burton, Patrick D.; Hansen, Clifford

2015-12-01

The Advanced Measurement and Analysis of PV Derate Factors project focuses on improving the accuracy and reducing the uncertainty of PV performance model predictions by addressing a common element of all PV performance models referred to as “derates”. Widespread use of “rules of thumb”, combined with significant uncertainty regarding appropriate values for these factors contribute to uncertainty in projected energy production.

Lunar mission safety and rescue: Executive summary

NASA Technical Reports Server (NTRS)

1971-01-01

An executive summary is presented of the escape/rescue and the hazards analyses for manned missions and operations in the 1980 time frame. The method of approach, basic data generated, and significant results are outlined, and highlights of the two analyses are given. Areas in which research or technical development efforts could improve mission safety, and specific suggestions for additional effort studies on safety analyses are listed.

Membrane Desalination: Where Are We, and What Can We Learn from Fundamentals?

PubMed

Imbrogno, Joseph; Belfort, Georges

2016-06-07

Although thermal desalination technology provides potable water in arid regions (e.g., Israel and the Gulf), its relatively high cost has limited application to less arid regions with large populations (e.g., California). Energy-intensive distillation is currently being replaced with less costly pressure- and electrically driven membrane-based processes. Reverse osmosis (RO) is a preferred membrane technology owing to process and pre- and posttreatment improvements that have significantly reduced energy requirements and cost. Further technical advances will require a deeper understanding of the fundamental science underlying RO. This includes determining the mechanism for water selectivity; elucidating the behavior of molecular water near polar and apolar surfaces, as well as the advantages and limitations of hydrophobic versus hydrophilic pores; learning the rules of selective water transport from nature; and designing synthetic analogs for selective water transport. Molecular dynamics simulations supporting experiments will play an important role in advancing these efforts. Finally, future improvements in RO are limited by inherent technical mass transfer limitations.

Formative assessment to develop oral communication competency using YouTube: self- and peer assessment in engineering

NASA Astrophysics Data System (ADS)

Nikolic, Sasha; Stirling, David; Ros, Montserrat

2018-07-01

Obtaining oral communication competency is an important skill for engineering students to prepare them for interacting and working in any professional setting. For engineers, it is also important to be able to present technical information to non-technical audiences. To ensure oral competency, a non-graded formative assessment approach using video with self- and peer assessment was introduced into a final-year engineering thesis course. A low workload approach was used due to growing student numbers and higher pressures on academic staff. A quasi-experimental design was used to investigate the differences between traditional delivery, self-assessment and combined self-assessment with peer feedback. The study found that the formative models were seen by students to help develop their presentation skills. However, the results showed no significant improvement compared to the traditional method. This could be due to previous presentation practice within the degree or more probable, the lack of incentive for weaker students to engage and improve due to the ungraded nature of the activity.

Technical Preparation: Preparing Students for Success. A Position Paper Presented by the Wisconsin Association of Secondary Vocational Administrators 1991-1992.

ERIC Educational Resources Information Center

Peterson, Charlene; And Others

Technical Preparation (Tech Prep) programs include basic skills and competencies to improve students' school-to-work transition. The following elements characterize Tech Prep: designed for grades 9-14, leading to an technical associate degree; parallels college preparatory program; offers technical program of study in business enterprise,…

Objective structured assessment of technical skills evaluation of theoretical compared with hands-on training of shoulder dystocia management: a randomized controlled trial.

PubMed

Buerkle, Bernd; Pueth, Julia; Hefler, Lukas A; Tempfer-Bentz, Eva-Katrin; Tempfer, Clemens B

2012-10-01

To compare the skills of performing a shoulder dystocia management algorithm after hands-on training compared with demonstration. We randomized medical students to a 30-minute hands-on (group 1) and a 30-minute demonstration (group 2) training session teaching a standardized shoulder dystocia management scheme on a pelvic training model. Participants were tested with a 22-item Objective Structured Assessment of Technical Skills scoring system after training and 72 hours thereafter. Objective Structured Assessment of Technical Skills scores were the primary outcome. Performance time, self-assessment, confidence, and global rating scale were the secondary outcomes. Statistics were performed using Mann-Whitney U test, χ test, and multiple linear regression analysis. Two hundred three participants were randomized. Objective Structured Assessment of Technical Skills scores were significantly higher in group 1 (n=103) compared with group 2 (n=100) (17.95±3.14 compared with 15.67±3.18, respectively; P<.001). The secondary outcomes global rating scale (GRS; 10.94±2.71 compared with 8.57±2.61, respectively; P<.001), self-assessment (3.15±0.94 compared with 2.72±1.01; P=.002), and confidence (3.72±0.98 compared with 3.34±0.90, respectively; P=.005), but not performance time (3:19±0:48 minutes compared with 3:31±1:05 minutes; P=.1), were also significantly different, favoring group 1. After 72 hours, Objective Structured Assessment of Technical Skills scores were still significantly higher in group 1 (n=67) compared with group 2 (n=60) (18.17±2.76 compared with 14.98±3.03, respectively; P<.001) as were GRS (10.80±2.62 compared with 8.15±2.59; P<.001) and self assessment (SA; 3.44±0.87 compared with 2.95±0.94; P=.003). In a multiple linear regression analysis, group assignment (group 1 compared with 2; P<.001) and sex (P=.002) independently influenced Objective Structured Assessment of Technical Skills scores. Hands-on training helps to achieve a significant improvement of shoulder dystocia management on a pelvic training model. www.ClinicalTrials.gov, NCT01618565. I.

Using simulation to train orthopaedic trainees in non-technical skills: A pilot study.

PubMed

Heaton, Samuel R; Little, Zoe; Akhtar, Kash; Ramachandran, Manoj; Lee, Joshua

2016-08-18

To enhance non-technical skills and to analyse participant's experience of a course tailored for orthopaedic surgeons. A Delphi technique was used to develop a course in human factors specific to orthopaedic residents. Twenty-six residents (six per course) participated in total with seven course facilitators all trained in Crisis Resource Management providing structured feedback. Six scenarios recreated challenging real-life situations using high-fidelity mannequins and simulated patients. Environments included a simulated operating suite, clinic room and ward setting. All were undertaken in a purpose built simulation suite utilising actors, mock operating rooms, mock clinical rooms and a high fidelity adult patient simulator organised through a simulation control room. Participants completed a 5-point Likert scale questionnaire (strongly disagree to strongly agree) before and after the course. This assessed their understanding of non-technical skills, scenario validity, relevance to orthopaedic training and predicted impact of the course on future practice. A course evaluation questionnaire was also completed to assess participants' feedback on the value and quality of the course itself. Twenty-six orthopaedic residents participated (24 male, 2 female; post-graduation 5-10 years), mean year of residency program 2.6 out of 6 years required in the United Kingdom. Pre-course questionnaires showed that while the majority of candidates recognised the importance of non-technical (NT) skills in orthopaedic training they demonstrated poor understanding of non-technical skills and their role. This improved significantly after the course (Likert score 3.0-4.2) and the perceived importance of these skills was reported as good or very good in 100%. The course was reported as enjoyable and provided an unthreatening learning environment with the candidates placing particular value on the learning opportunity provided by reflecting on their performance. All agreed that the course achieved its intended aims with realistic simulation scenarios. Participants believed patient care, patient safety and team working would all improve with further human factors training (4.4-4.6). and felt that NT skills learnt through simulation-based training should become an integral component of their training program. Participants demonstrated improved understanding of non-technical performance, recognised its relevance to patient safety and expressed a desire for its integration in training.

Small Potatoes No More.

ERIC Educational Resources Information Center

Ries, Eric

2000-01-01

Idaho has improved its historically poor career and technical education programs by changing priorities and increasing state support. A large grant from the J.A. and Kathryn Albertson Foundation is being used to develop professional-technical academies and to train career and technical teachers. (JOW)

STDAC: Solar thermal design assistance center annual report fiscal year 1994

NASA Astrophysics Data System (ADS)

The Solar Thermal Design Assistance Center (STDAC) at Sandia is a resource provided by the DOE Solar Thermal Program. The STDAC's major objective is to accelerate the use of solar thermal systems by providing direct technical assistance to users in industry, government, and foreign countries; cooperating with industry to test, evaluate, and develop renewable energy systems and components; and educating public and private professionals, administrators, and decision makers. This FY94 report highlights the activities and accomplishments of the STDAC. In 1994, the STDAC continued to provide significant direct technical assistance to domestic and international organizations in industry, government, and education, Applying solar thermal technology to solve energy problems is a vital element of direct technical assistance. The STDAC provides information on the status of new, existing, and developing solar technologies; helps users screen applications; predicts the performance of components and systems; and incorporates the experience of Sandia's solar energy personnel and facilities to provide expert guidance. The STDAC directly enhances the US solar industry's ability to successfully bring improved systems to the marketplace. By collaborating with Sandia's Photovoltaic Design Assistance Center and the National Renewable Energy Laboratory the STDAC is able to offer each customer complete service in applying solar thermal technology. At the National Solar Thermal Test Facility the STDAC tests and evaluates new and innovative solar thermal technologies. Evaluations are conducted in dose cooperation with manufacturers, and the results are used to improve the product and/or quantify its performance characteristics. Manufacturers, in turn, benefit from the improved design, economic performance, and operation of their solar thermal technology. The STDAC provides cost sharing and in-kind service to manufacturers in the development and improvement of solar technology.

Improvement of technical results following use of Ingelvac CircoFLEX in a Dutch organic breeding and fattening farm: a case report.

PubMed

Schlepers, M; Gelauf, J; Wertenbroek, N; Nielen, M

2013-07-01

Porcine Circovirus type 2 (PCV2) is a ubiquitous infection and major cause of production loss for the pig industry. The aim of this study was to evaluate the effect of vaccination against PCV2 on technical results of pigs on an organic breeding and fattening farm, focussing on growth and mortality of weaned piglets and fattening pigs. The study was based on retrospective data between January 2009 and May 2011. During the study period, three subsequent vaccination strategies were used: 1. Stellamune One, 2. Stellamune One+CircoFLEX, 3. MycoFLEX+CircoFLEX. From these three periods, the corresponding management- and slaughterhouse data were analysed by an ANOVA-test. Due to few data in period 2 and an outbreak of Actinobacillus pleuropneumoniae during periods 2 and 3, these two periods were combined in one period and analysed by a two-sample t-test. Mortality of weaned piglets decreased with 3.6% (0.6 - 6.6%) (P0.023) in comparison to period 1 and average daily weight gain improved by 21 gram (7 - 34 gram) (P0.004) in periods 2 and 3. Mortality of fattening pigs was 2.3% (1.2 - 3.5%) (P0.001) less than in period 1 and corrected energy conversion rate improved 0.27 (0.05 - 0.49) (P0.017). There was no significant effect on slaughterhouse parameters. In conclusion, vaccination against PCV2 improved technical results of weaned and fattening pigs on this farm. The advantage of vaccination with MycoFLEX+CircoFLEX instead of Stellamune One+CircoFLEX is that the two FLEX-vaccines can be mixed and administered as a one shot vaccine, reducing work load and animal stressors.

Teaching Technical Report Writing

ERIC Educational Resources Information Center

De Pasquale, Joseph A.

1977-01-01

A high school electronics teacher describes the integration of technical report writing in the electronics program for trade and industrial students. He notes that the report writing rather than just recording data seemed to improve student laboratory experience but further improvements in the program are needed. A sample lab report is included.…

Surgical Practical Skills Learning Curriculum: Implementation and Interns' Confidence Perceptions.

PubMed

Acosta, Danilo; Castillo-Angeles, Manuel; Garces-Descovich, Alejandro; Watkins, Ammara A; Gupta, Alok; Critchlow, Jonathan F; Kent, Tara S

To provide an overview of the practical skills learning curriculum and assess its effects over time on the surgical interns' perceptions of their technical skills, patient management, administrative tasks, and knowledge. An 84-hour practical skills curriculum composed of didactic, simulation, and practical sessions was implemented during the 2015 to 2016 academic year for general surgery interns. Totally, 40% of the sessions were held during orientation, whereas the remainder sessions were held throughout the academic year. Interns' perceptions of their technical skills, administrative tasks, patient management, and knowledge were assessed by the practical skills curriculum residents' perception survey at various time points during their intern year (baseline, midpoint, and final). Interns were also asked to fill out an evaluation survey at the completion of each session to obtain feedback on the curriculum. General Surgery Residency program at a tertiary care academic institution. 20 General Surgery categorical and preliminary interns. Significant differences were found over time in interns' perceptions on their technical skills, patient management, administrative tasks, and knowledge (p < 0.001 for all). The results were also statistically significant when accounting for a prior boot camp course in medical school, intern status (categorical or preliminary), and gender (p < 0.05 for all). Differences in interns' perceptions occurred both from baseline to midpoint, and from midpoint to final time point evaluations (p < 0.001 for all). Prior surgical boot camp in medical school status, intern status (categorical vs. preliminary), and gender did not differ in the interns' baseline perceptions of their technical skills, patient management, administrative tasks, and knowledge (p > 0.05 for all). Implementation of a Practical Skills Curriculum in surgical internships can improve interns' confidence perception on their technical skills, patient management skills, administrative tasks, and knowledge. Copyright © 2018. Published by Elsevier Inc.

Perceptions of secondary technical schools students in Assiut, upper Egypt, about AIDS: Effect of an educational intervention.

PubMed

Selim, Mohei El-Din A; El-Shereef, Etemad A A

2010-01-01

Acquired Immunodeficiency Syndrome (AIDS) is a great threat to the youth. The aim is to assess the knowledge of secondary technical schools students on AIDS, identify related misconceptions, and measure the effect of a short health education program on their level of knowledge. This quasi-experimental study was done on 575 secondary technical schools students in Assiut City, recruited through a two-stage stratified cluster sampling. A self-administered anonymous questionnaire was used to collect data. A health education program was implemented, and its effect assessed through pre-post testing. The age range of the students was 16 to 20 years, with more girls (57.0%). Only 30.8% had satisfactory knowledge about AIDS in the pretest. Statistically significant improvements in knowledge were revealed after program implementation (P<0.001). Students who were Muslim, of urban residence, and had mobile phones had significantly higher scores (P=0.037, 0.004, 0.038 respectively). The most common misconceptions were the definition of AIDS according to transmission, and phobias related to transmission, which decreased after the intervention. Multivariate analysis showed that the statistically significant independent predictors of the change in knowledge score after the intervention were age, religion and the health education program. Secondary technical schools students in Assiut city have a major deficiency in knowledge and many misconceptions regarding AIDS. The educational intervention had a positive impact on their knowledge, but a less marked effect on misconceptions. Knowledge was affected by age and religious belief. It is recommended that more health educational efforts tailored to needs and with approaches suitable to community cultures and values be introduced.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauglitz, Phillip A.; Bontha, Jagannadha R.; Daniel, Richard C.

The Hanford Waste Treatment and Immobilization Plant (WTP) is currently being designed and constructed to pretreat and vitrify a large portion of the waste in the 177 underground waste storage tanks at the Hanford Site. A number of technical issues related to the design of the pretreatment facility (PTF) of the WTP have been identified. These issues must be resolved prior to the U.S. Department of Energy (DOE) Office of River Protection (ORP) reaching a decision to proceed with engineering, procurement, and construction activities for the PTF. One of the issues is Technical Issue T1 - Hydrogen Gas Release frommore » Vessels (hereafter referred to as T1). The focus of T1 is identifying controls for hydrogen release and completing any testing required to close the technical issue. In advance of selecting specific controls for hydrogen gas safety, a number of preliminary technical studies were initiated to support anticipated future testing and to improve the understanding of hydrogen gas generation, retention, and release within PTF vessels. These activities supported the development of a plan defining an overall strategy and approach for addressing T1 and achieving technical endpoints identified for T1. Preliminary studies also supported the development of a test plan for conducting testing and analysis to support closing T1. Both of these plans were developed in advance of selecting specific controls, and in the course of working on T1 it was decided that the testing and analysis identified in the test plan were not immediately needed. However, planning activities and preliminary studies led to significant technical progress in a number of areas. This report summarizes the progress to date from the preliminary technical studies. The technical results in this report should not be used for WTP design or safety and hazards analyses and technical results are marked with the following statement: “Preliminary Technical Results for Planning – Not to be used for WTP Design or Safety Analyses.”« less

Numerical Arc Segmentation Algorithm for a Radio Conference-NASARC (version 4.0) technical manual

NASA Technical Reports Server (NTRS)

Whyte, Wayne A., Jr.; Heyward, Ann O.; Ponchak, Denise S.; Spence, Rodney L.; Zuzek, John E.

1988-01-01

The information contained in the NASARC (Version 4.0) Technical Manual and NASARC (Version 4.0) User's Manual relates to the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) software development through November 1, 1988. The Technical Manual describes the NASARC concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operation instructions. Significant revisions were incorporated in the Version 4.0 software over prior versions. These revisions have further enhanced the modeling capabilities of the NASARC procedure and provide improved arrangements of predetermined arcs within the geostationary orbits. Array dimensions within the software were structured to fit within the currently available 12 megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 4.0) allows worldwide planning problem scenarios to be accommodated within computer run time and memory constraints with enhanced likelihood and ease of solution.

Commentary: Sexism, Sex Stereotyping, and the Technical Writer.

ERIC Educational Resources Information Center

Veiga, Nancy E.

1989-01-01

Discusses the impact of possible sex-based differences in communication styles on the technical writer's job. Argues that technical writers can choose to use both male and female communication styles to acknowledge multiple audiences and to improve the quality of their documents. (KEH)

78 FR 40459 - Applications for New Awards; Technical Assistance and Dissemination To Improve Services and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... DEPARTMENT OF EDUCATION Applications for New Awards; Technical Assistance and Dissemination To... AGENCY: Office of Special Education and Rehabilitative Services, Office of Elementary and Secondary Education, Department of Education. ACTION: Notice. Overview Information Technical Assistance and...

Evaluating the effectiveness of case method instruction in technical communication

NASA Technical Reports Server (NTRS)

Feinberg, S. G.

1981-01-01

The effectiveness of the case method as an instructional technique in improving technical writing was evaluated. The development of a self-report instrument that attempts to measure changes in attitude toward technical communication and the presentation results change are the purpose of this paper. Standards for developing a case set forth by Goldstein and Couture, were used to design an evaluation instrument to measure the effect instruction on student attitude toward technical communication. This self-report instrument is based on model developed and tested by Daly and Miller who studied writer attitude and apprehension toward writing. It was the most important objective of any evaluation is to provide information for improving the program.

Documentation as Problem Solving for Literacy Outreach Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girill, T R

2004-07-06

Age-appropriate technical writing lessons for underperforming high-school students can offer them an innovative, ''authentic'' way to improve how they read and write. Thus the techniques and principles of effective technical communication routinely applied at work also provide a positive response to one of today's great educational challenges. This workshop shows participants how to (1) introduce English and science teachers to the value of technical writing as a response to school literacy problems, (2) prepare plausible practice exercises to help students improve their basic literacy, and (3) recognize and respond to known literacy outreach pitfalls. Every effective literacy outreach project basedmore » on technical writing needs to address four key problems.« less

Simulated spinal cerebrospinal fluid leak repair: an educational model with didactic and technical components.

PubMed

Ghobrial, George M; Anderson, Paul A; Chitale, Rohan; Campbell, Peter G; Lobel, Darlene A; Harrop, James

2013-10-01

In the era of surgical resident work hour restrictions, the traditional apprenticeship model may provide fewer hours for neurosurgical residents to hone technical skills. Spinal dura mater closure or repair is 1 skill that is infrequently encountered, and persistent cerebrospinal fluid leaks are a potential morbidity. To establish an educational curriculum to train residents in spinal dura mater closure with a novel durotomy repair model. The Congress of Neurological Surgeons has developed a simulation-based model for durotomy closure with the ongoing efforts of their simulation educational committee. The core curriculum consists of didactic training materials and a technical simulation model of dural repair for the lumbar spine. Didactic pretest scores ranged from 4/11 (36%) to 10/11 (91%). Posttest scores ranged from 8/11 (73%) to 11/11 (100%). Overall, didactic improvements were demonstrated by all participants, with a mean improvement between pre- and posttest scores of 1.17 (18.5%; P = .02). The technical component consisted of 11 durotomy closures by 6 participants, where 4 participants performed multiple durotomies. Mean time to closure of the durotomy ranged from 490 to 546 seconds in the first and second closures, respectively (P = .66), whereby the median leak rate improved from 14 to 7 (P = .34). There were also demonstrative technical improvements by all. Simulated spinal dura mater repair appears to be a potentially valuable tool in the education of neurosurgery residents. The combination of a didactic and technical assessment appears to be synergistic in terms of educational development.

The Taguchi Method Application to Improve the Quality of a Sustainable Process

NASA Astrophysics Data System (ADS)

Titu, A. M.; Sandu, A. V.; Pop, A. B.; Titu, S.; Ciungu, T. C.

2018-06-01

Taguchi’s method has always been a method used to improve the quality of the analyzed processes and products. This research shows an unusual situation, namely the modeling of some parameters, considered technical parameters, in a process that is wanted to be durable by improving the quality process and by ensuring quality using an experimental research method. Modern experimental techniques can be applied in any field and this study reflects the benefits of interacting between the agriculture sustainability principles and the Taguchi’s Method application. The experimental method used in this practical study consists of combining engineering techniques with experimental statistical modeling to achieve rapid improvement of quality costs, in fact seeking optimization at the level of existing processes and the main technical parameters. The paper is actually a purely technical research that promotes a technical experiment using the Taguchi method, considered to be an effective method since it allows for rapid achievement of 70 to 90% of the desired optimization of the technical parameters. The missing 10 to 30 percent can be obtained with one or two complementary experiments, limited to 2 to 4 technical parameters that are considered to be the most influential. Applying the Taguchi’s Method in the technique and not only, allowed the simultaneous study in the same experiment of the influence factors considered to be the most important in different combinations and, at the same time, determining each factor contribution.

Plug-Assisted Retrograde Transvenous Obliteration for the Treatment of Gastric Variceal Hemorrhage.

PubMed

Chang, Min-Yung; Kim, Man-Deuk; Kim, Taehwan; Shin, Wonseon; Shin, Minwoo; Kim, Gyoung Min; Won, Jong Yun; Park, Sung Il; Lee, Do Yun

2016-01-01

To evaluate the feasibility, safety, and clinical outcomes of plug-assisted retrograde transvenous obliteration (PARTO) to treat gastric variceal hemorrhage in patients with portal hypertension. From May 2012 to June 2014, 19 patients (11 men and 8 women, median age; 61, with history of gastric variceal hemorrhage; 17, active bleeding; 2) who underwent PARTO using a vascular plug and a gelfoam pledget were retrospectively analyzed. Clinical and laboratory data were examined to evaluate primary (technical and clinical success, complications) and secondary (worsening of esophageal varix [EV], change in liver function) end points. Median follow-up duration was 11 months, from 6.5 to 18 months. The Wilcoxon signed-rank test was used to compare laboratory data before and after the procedure. Technical success (complete occlusion of the efferent shunt and complete filling of gastric varix [GV] with a gelfoam slurry) was achieved in 18 of 19 (94.7%) patients. The embolic materials could not reach the GV in 1 patient who had endoscopic glue injection before our procedure. The clinical success rate (no recurrence of gastric variceal bleeding) was the same because the technically failed patient showed recurrent bleeding later. Acute complications included fever (n = 2), fever and hypotension (n = 2; one diagnosed adrenal insufficiency), and transient microscopic hematuria (n = 3). Ten patients underwent follow-up endoscopy; all exhibited GV improvement, except 2 without endoscopic change. Five patients exhibited aggravated EV, and 2 of them had a bleeding event. Laboratory findings were significantly improved after PARTO. PARTO is technically feasible, safe, and effective for gastric variceal hemorrhage in patients with portal hypertension.

New Directions for High School Career and Technical Education in Wyoming: A Strategic Plan

ERIC Educational Resources Information Center

Hoachlander, Gary; Klein, Steven; Studier, Carol

2007-01-01

This report offers a plan for improving career and technical education (CTE) in Wyoming, but it is about more than just technical education. Realizing the potential of CTE to contribute to students' mastery of both academic and technical knowledge depends not only on strengthening the CTE curriculum, but also on embedding CTE in a larger program…

The Relationship Between Technical Errors and Decision Making Skills in the Junior Resident

PubMed Central

Nathwani, J. N.; Fiers, R.M.; Ray, R.D.; Witt, A.K.; Law, K. E.; DiMarco, S.M.; Pugh, C.M.

2017-01-01

Objective The purpose of this study is to co-evaluate resident technical errors and decision-making capabilities during placement of a subclavian central venous catheter (CVC). We hypothesize that there will be significant correlations between scenario based decision making skills, and technical proficiency in central line insertion. We also predict residents will have problems in anticipating common difficulties and generating solutions associated with line placement. Design Participants were asked to insert a subclavian central line on a simulator. After completion, residents were presented with a real life patient photograph depicting CVC placement and asked to anticipate difficulties and generate solutions. Error rates were analyzed using chi-square tests and a 5% expected error rate. Correlations were sought by comparing technical errors and scenario based decision making. Setting This study was carried out at seven tertiary care centers. Participants Study participants (N=46) consisted of largely first year research residents that could be followed longitudinally. Second year research and clinical residents were not excluded. Results Six checklist errors were committed more often than anticipated. Residents performed an average of 1.9 errors, significantly more than the 1 error, at most, per person expected (t(44)=3.82, p<.001). The most common error was performance of the procedure steps in the wrong order (28.5%, P<.001). Some of the residents (24%) had no errors, 30% committed one error, and 46 % committed more than one error. The number of technical errors committed negatively correlated with the total number of commonly identified difficulties and generated solutions (r(33)= −.429, p=.021, r(33)= −.383, p=.044 respectively). Conclusions Almost half of the surgical residents committed multiple errors while performing subclavian CVC placement. The correlation between technical errors and decision making skills suggests a critical need to train residents in both technique and error management. ACGME Competencies Medical Knowledge, Practice Based Learning and Improvement, Systems Based Practice PMID:27671618

The influence of deficient retro-aortic rim on technical success and early adverse events following device closure of secundum atrial septal defects: An Analysis of the IMPACT Registry®.

PubMed

O'Byrne, Michael L; Gillespie, Matthew J; Kennedy, Kevin F; Dori, Yoav; Rome, Jonathan J; Glatz, Andrew C

2017-01-01

Concern regarding aortic erosion has focused attention on the retro-aortic rim in patients undergoing device closure of atrial septal defects (ASD), but its effect on early outcomes is not well studied. A multicenter retrospective cohort study of patients undergoing device occlusion of ASD between 1/2011-10/2014 was performed, using data from the IMproving Pediatric and Adult Congenital Treatment Registry. Subjects were divided between those with retro-aortic rim <5 and ≥5 mm. Primary outcomes were technical failure and major early adverse events. Case times were measured as surrogates of technical complexity. The effect of deficient retro-aortic rim on primary outcomes was assessed using hierarchical logistic regression, adjusting for other suspected covariates and assessing whether they represent independent risk factors RESULTS: 1,564 subjects (from 77 centers) were included, with deficient retro-aortic rim present in 40%. Technical failure occurred in 91 subjects (5.8%) and a major early adverse event in 64 subjects (4.1%). Adjusting for known covariates, the presence of a deficient retro-aortic rim was not significantly associated with technical failure (OR: 1.3, 95% CI: 0.9-2.1) or major early adverse event (OR: 0.7, 95% CI: 0.4-1. 2). Total case (P = 0.01) and fluoroscopy time (P = 0.02) were greater in subjects with deficient rim, but sheath time was not significantly different (P = 0.07). Additional covariates independently associated with these outcomes were identified. Deficient retro-aortic rim was highly prevalent but not associated with increased risk of technical failure or early adverse events. Studies with longer follow-up are necessary to assess other outcomes, including device erosion. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Individualized deliberate practice on a virtual reality simulator improves technical performance of surgical novices in the operating room: a randomized controlled trial.

PubMed

Palter, Vanessa N; Grantcharov, Teodor P

2014-03-01

The purpose of this study was to investigate whether individualized deliberate practice on a virtual reality (VR) simulator results in improved technical performance in the operating room. Training on VR simulators has been shown to improve technical performance in the operating room (OR). Currently described VR curricula consist of trainees practicing the same tasks until expert proficiency is reached. It has yet to be investigated whether the individualized deliberate practice, where curricula tasks vary depending on prior levels of technical proficiency, would translate into the OR. This single-blinded prospective trial randomized 16 novice surgical residents to a deliberate practice (DP) group and a conventional residency training group. Both groups performed a laparoscopic cholecystectomy in the OR that was video-recorded. Technical performance of DP group residents in the OR was assessed using 3 validated assessment tools. A score of less than 60% on any component of the assessment tool resulted in the trainee practicing a specific task on the VR simulator. The DP group practiced on the simulator as per their individualized schedule. Both groups then performed another laparoscopic cholecystectomy. A blinded expert assessed the OR recordings using a validated global rating scale. Although both groups had similar technical abilities preintervention [DP: median score, 13.5 (9.3-15.0); control: median score, 14.5 (9.3-17.8); P = 0.45], the DP residents had a superior technical performance postintervention [DP: median score, 17.0 (15.3-18.5); control: median score, 12.5 (7.5-14.0); P = 0.03]. Of 8 DP residents, 6 practiced 5 basic VR tasks (median 1 trial to pass), and 7 of 8 practiced 2 advanced tasks (median 4 trials to pass). A curriculum of deliberate individualized practice on a VR simulator improves technical performance in the OR. This has implications to greatly improve the feasibility of implementing simulation-based curricula in residency training programs, rather then having them being limited to research protocols.

Diabetic foot workshop: Improving technical and educational skills for nurses.

PubMed

Aalaa, Maryam; Sanjari, Mahnaz; Shahbazi, Samimeh; Shayeganmehr, Zahra; Abooeirad, Maryam; Amini, Mohammad Reza; Adibi, Hossien; Mehrdad, Neda

2017-01-01

Diabetes mellitus as one of the most common metabolic disorders has some complications, one of the main ones is diabetic foot (DF). Appropriate care and education prevents 85% of diabetic foot amputations. An ideal management to prevent and treat diabetic foot necessitates a close collaboration between the health team members and the diabetic patient. Therefore, improving nurses' knowledge about DF care and advancement in the quality of care provided by the nurses could significantly improve diabetic foot prevention and management. Therefore, the aim of DF workshop was to improve technical and educational skills of the nurses to prevent and manage diabetic foot. Considering the vital role of the nurses in providing DF care, EMRI decided to conduct Diabetic foot workshop for them. The following five steps were designed for the 14 coordinating sessions in the workshop: Goals definition, deciding about attendees, location selection, creating agenda, and developing a follow-up plan. "Diabetic Foot Workshop for Nurses" provides appropriate training to DF nurses at the national level; and combining theory and practice in this workshop not only increases nurses' knowledge, but also improves their skills in the field of the diabetic foot. Providing education and care to patients by DF nurse specialists instead of general nurses could be an important output of this workshop, which may lead to DF prevention and amputation decrease in the long term.

Non-technical skills training to enhance patient safety.

PubMed

Gordon, Morris

2013-06-01

  Patient safety is an increasingly recognised issue in health care. Systems-based and organisational methods of quality improvement, as well as education focusing on key clinical areas, are common, but there are few reports of educational interventions that focus on non-technical skills to address human factor sources of error. A flexible model for non-technical skills training for health care professionals has been designed based on the best available evidence, and with sound theoretical foundations.   Educational sessions to improve non-technical skills in health care have been described before. The descriptions lack the details to allow educators to replicate and innovate further.   A non-technical skills training course that can be delivered as either a half- or full-day intervention has been designed and delivered to a number of mixed groups of undergraduate medical students and doctors in postgraduate training. Participant satisfaction has been high and patient safety attitudes have improved post-intervention.   This non-technical skills educational intervention has been built on a sound evidence base, and is described so as to facilitate replication and dissemination. With the key themes laid out, clinical educators will be able to build interventions focused on numerous clinical issues that pay attention to human factor contributors to safety. © 2013 John Wiley & Sons Ltd.

Regional Technical Exchange Centers Connect Fuel Cell Technology Suppliers,

Science.gov Websites

Manufacturers | News | NREL Regional Technical Exchange Centers Connect Fuel Cell Technology Suppliers, Manufacturers Regional Technical Exchange Centers Connect Fuel Cell Technology Suppliers fuel cell and hydrogen components and systems and improve U.S. manufacturing competitiveness. The

77 FR 36501 - Applications for New Awards: Technical Assistance and Dissemination To Improve Services and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-19

... outcome data for program improvement; and meeting new requirements in the IDEA Part C regulations issued... DEPARTMENT OF EDUCATION Applications for New Awards: Technical Assistance and Dissemination To... applications for new awards for fiscal year (FY) 2012. Catalog of Federal Domestic Assistance (CFDA) Number: 84...

Supporting Minority-Serving Institutions in Their Program Improvement Efforts: A Responsive Technical Assistance Approach

ERIC Educational Resources Information Center

Bay, Mary; Lopez-Reyna, Norma A.; Guillory, Barbara L.

2012-01-01

To reform a special education teacher preparation program can be gratifying, difficult, complex, political, and urgently needed. The Monarch Center, a federally funded technical assistance center, was established to guide and support minority-serving institutions in their efforts to improve their teacher preparation programs. Four guidelines…

AUTOMATION IN LIBRARIES, ATLIS WORKSHOP (1ST, NOVEMBER 15-17, 1966).

ERIC Educational Resources Information Center

Redstone Scientific Information Center, Redstone Arsenal, AL.

THIS REPORT CONTAINS THE MINUTES OF A WORKSHOP ON AUTOMATION IN LIBRARIES, HELD TO IMPROVE THE EFFECTIVENESS OF ARMY TECHNICAL LIBRARIES AND SPONSORED BY ARMY TECHNICAL LIBRARY IMPROVEMENT STUDIES (ATLIS). THE PROGRAM WAS DEVELOPED IN FOUR AREAS, EACH ILLUSTRATED WITH PRESENTATIONS BY PEOPLE ACTUALLY INVOLVED IN THESE SYSTEMS. THE FIRST SESSION…

Continuous Quality Improvement in a University Setting: The Case of the Department of Vocational and Technical Education at the University of Minnesota.

ERIC Educational Resources Information Center

Copa, George H.

1993-01-01

Discusses the application of continuous quality improvement principles in the Department of Vocational and Technical Education at the University of Minnesota. Reviews the processes that the department incorporated to implement this program and lists future steps and categories of action. (Author)

Lean Participative Process Improvement: Outcomes and Obstacles in Trauma Orthopaedics

PubMed Central

New, Steve; Hadi, Mohammed; Pickering, Sharon; Robertson, Eleanor; Morgan, Lauren; Griffin, Damian; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; McCulloch, Peter

2016-01-01

Objectives To examine the effectiveness of a “systems” approach using Lean methodology to improve surgical care, as part of a programme of studies investigating possible synergy between improvement approaches. Setting A controlled before-after study using the orthopaedic trauma theatre of a UK Trust hospital as the active site and an elective orthopaedic theatre in the same Trust as control. Participants All staff involved in surgical procedures in both theatres. Interventions A one-day “lean” training course delivered by an experienced specialist team was followed by support and assistance in developing a 6 month improvement project. Clinical staff selected the subjects for improvement and designed the improvements. Outcome Measures We compared technical and non-technical team performance in theatre using WHO checklist compliance evaluation, “glitch count” and Oxford NOTECHS II in a sample of directly observed operations, and patient outcome (length of stay, complications and readmissions) for all patients. We collected observational data for 3 months and clinical data for 6 months before and after the intervention period. We compared changes in measures using 2-way analysis of variance. Results We studied 576 cases before and 465 after intervention, observing the operation in 38 and 41 cases respectively. We found no significant changes in team performance or patient outcome measures. The intervention theatre staff focused their efforts on improving first patient arrival time, which improved by 20 minutes after intervention. Conclusions This version of “lean” system improvement did not improve measured safety processes or outcomes. The study highlighted an important tension between promoting staff ownership and providing direction, which needs to be managed in “lean” projects. Space and time for staff to conduct improvement activities are important for success. PMID:27124012

Enabling Chemistry Technologies and Parallel Synthesis-Accelerators of Drug Discovery Programmes.

PubMed

Vasudevan, A; Bogdan, A R; Koolman, H F; Wang, Y; Djuric, S W

There is a pressing need to improve overall productivity in the pharmaceutical industry. Judicious investments in chemistry technologies can have a significant impact on cycle times, cost of goods and probability of technical success. This perspective describes some of these technologies developed and implemented at AbbVie, and their applications to the synthesis of novel scaffolds and to parallel synthesis. © 2017 Elsevier B.V. All rights reserved.

Contrast-Enhanced Magnetic Resonance Cholangiography: Practical Tips and Clinical Indications for Biliary Disease Management.

PubMed

Palmucci, Stefano; Roccasalva, Federica; Piccoli, Marina; Fuccio Sanzà, Giovanni; Foti, Pietro Valerio; Ragozzino, Alfonso; Milone, Pietro; Ettorre, Giovanni Carlo

2017-01-01

Since its introduction, MRCP has been improved over the years due to the introduction of several technical advances and innovations. It consists of a noninvasive method for biliary tree representation, based on heavily T2-weighted images. Conventionally, its protocol includes two-dimensional single-shot fast spin-echo images, acquired with thin sections or with multiple thick slabs. In recent years, three-dimensional T2-weighted fast-recovery fast spin-echo images have been added to the conventional protocol, increasing the possibility of biliary anatomy demonstration and leading to a significant benefit over conventional 2D imaging. A significant innovation has been reached with the introduction of hepatobiliary contrasts, represented by gadoxetic acid and gadobenate dimeglumine: they are excreted into the bile canaliculi, allowing the opacification of the biliary tree. Recently, 3D interpolated T1-weighted spoiled gradient echo images have been proposed for the evaluation of the biliary tree, obtaining images after hepatobiliary contrast agent administration. Thus, the acquisition of these excretory phases improves the diagnostic capability of conventional MRCP-based on T2 acquisitions. In this paper, technical features of contrast-enhanced magnetic resonance cholangiography are briefly discussed; main diagnostic tips of hepatobiliary phase are showed, emphasizing the benefit of enhanced cholangiography in comparison with conventional MRCP.

Potentials for Platooning in U.S. Highway Freight Transport: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muratori, Matteo; Holden, Jacob; Lammert, Michael

2017-03-15

Smart technologies enabling connection among vehicles and between vehicles and infrastructure as well as vehicle automation to assist human operators are receiving significant attention as means for improving road transportation systems by reducing fuel consumption - and related emissions - while also providing additional benefits through improving overall traffic safety and efficiency. For truck applications, currently responsible for nearly three-quarters of the total U.S. freight energy use and greenhouse gas (GHG) emissions, platooning has been identified as an early feature for connected and automated vehicles (CAVs) that could provide significant fuel savings and improved traffic safety and efficiency without radicalmore » design or technology changes compared to existing vehicles. A statistical analysis was performed based on a large collection of real-world U.S. truck usage data to estimate the fraction of total miles that are technically suitable for platooning. In particular, our analysis focuses on estimating 'platoonable' mileage based on overall highway vehicle use and prolonged high-velocity traveling, establishing that about 65% of the total miles driven by combination trucks could be driven in platoon formation, leading to a 4% reduction in total truck fuel consumption. This technical potential for 'platoonable' miles in the U.S. provides an upper bound for scenario analysis considering fleet willingness to platoon as an estimate of overall benefits of early adoption of CAV technologies. A benefit analysis is proposed to assess the overall potential for energy savings and emissions mitigation by widespread implementation of highway platooning for trucks.« less

Improving Career and Technical Education to Help Students Succeed in the Workforce. Hearing before the Subcommittee on Early Childhood, Elementary, and Secondary Education, Committee on Education and the Workforce, U.S. House of Representatives, One Hundred Fourteenth Congress, First Session (October 27, 2015). Serial Number 114-33

ERIC Educational Resources Information Center

US House of Representatives, 2016

2016-01-01

This document records testimony from a hearing held to examine the critical role of career and technical education programs in preparing the nation's students for success in college and career. Many of these programs are funded under the Carl D. Perkins Career and Technical Education Improvement Act of 2006. Member statements were provided by: (1)…

EMB history to increase health technology literacy in the general public for improved health worldwide.

PubMed

Leder, Ron S

2009-01-01

History provides common access to technology for both technical and non technical persons and for youngsters. Placed in an historical context complex health technology and health care can be more understandable and therefore more accessible to the general public; technical persons can understand past health technology advances to help propel the field. History is a reference for experts disguised as a story that anyone can understand and enjoy. This can be useful and effective at improving self advocate based health care.

Leadership Skills among Technical and Vocational Educators

ERIC Educational Resources Information Center

Zakaria, Nurazyan Zahidah; Jizat, Nor Atikah Md.; Zakaria, Normah

2015-01-01

The purpose of leadership skills among technical and vocational educator are to prepare them towards effective organization. Effective leadership is widely accepted as being a key constituent in achieving organization improvement and to examine. This study aimed to gauge the leadership skills among technical and vocational educators effectiveness…

77 FR 27814 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... NUCLEAR REGULATORY COMMISSION [Project No. 753; NRC-2012-0019] Model Safety Evaluation for Plant... Regulatory Commission (NRC) is announcing the availability of the model safety evaluation (SE) for plant... the Improved Standard Technical Specification (ISTS), NUREG-1431, ``Standard Technical Specifications...

Effect of obstetric team training on team performance and medical technical skills: a randomised controlled trial.

PubMed

Fransen, A F; van de Ven, J; Merién, A E R; de Wit-Zuurendonk, L D; Houterman, S; Mol, B W; Oei, S G

2012-10-01

To determine whether obstetric team training in a medical simulation centre improves the team performance and utilisation of appropriate medical technical skills of healthcare professionals. Cluster randomised controlled trial. The Netherlands. The obstetric departments of 24 Dutch hospitals. The obstetric departments were randomly assigned to a 1-day session of multiprofessional team training in a medical simulation centre or to no such training. Team training was given with high-fidelity mannequins by an obstetrician and a communication expert. More than 6 months following training, two unannounced simulated scenarios were carried out in the delivery rooms of all 24 obstetric departments. The scenarios, comprising a case of shoulder dystocia and a case of amniotic fluid embolism, were videotaped. The team performance and utilisation of appropriate medical skills were evaluated by two independent experts. Team performance evaluated with the validated Clinical Teamwork Scale (CTS) and the employment of two specific obstetric procedures for the two clinical scenarios in the simulation (delivery of the baby with shoulder dystocia in the maternal all-fours position and conducting a perimortem caesarean section within 5 minutes for the scenario of amniotic fluid embolism). Seventy-four obstetric teams from 12 hospitals in the intervention group underwent teamwork training between November 2009 and July 2010. The teamwork performance in the training group was significantly better in comparison to the nontraining group (median CTS score: 7.5 versus 6.0, respectively; P = 0.014). The use of the predefined obstetric procedures for the two clinical scenarios was also significantly more frequent in the training group compared with the nontraining group (83 versus 46%, respectively; P = 0.009). Team performance and medical technical skills may be significantly improved after multiprofessional obstetric team training in a medical simulation centre. © 2012 The Authors BJOG An International Journal of Obstetrics and Gynaecology © 2012 RCOG.

Benchmarking organ procurement organizations: a national study.

PubMed Central

Ozcan, Y A; Begun, J W; McKinney, M M

1999-01-01

OBJECTIVE: An exploratory examination of the technical efficiency of organ procurement organizations (OPOs) relative to optimal patterns of production in the population of OPOs in the United States. DATA SOURCES: A composite data set with the OPO as the unit of analysis, constructed from a 1995 national survey of OPOs (n = 64), plus secondary data from the Association of Organ Procurement Organizations and the United Network for Organ Sharing. STUDY DESIGN: The study uses data envelopment analysis (DEA) to evaluate the technical efficiency of all OPOs. PRINCIPAL FINDINGS: Overall, six of the 22 larger OPOs (27 percent) are classified as inefficient, while 23 of the 42 smaller OPOs (55 percent) are classified as inefficient. Efficient OPOs recover significantly more kidneys and extrarenal organs; have higher operating expenses; and have more referrals, donors, extrarenal transplants, and kidney transplants. The quantities of hospital development personnel and other personnel, and formalization of hospital development activities in both small and large OPOs, do not significantly differ. CONCLUSIONS: Indications that larger OPOs are able to operate more efficiently relative to their peers suggest that smaller OPOs are more likely to benefit from technical assistance. More detailed information on the activities of OPO staff would help pinpoint activities that can increase OPO efficiency and referrals, and potentially improve outcomes for large numbers of patients awaiting transplants. PMID:10536974

Combining Systems and Teamwork Approaches to Enhance the Effectiveness of Safety Improvement Interventions in Surgery: The Safer Delivery of Surgical Services (S3) Program.

PubMed

McCulloch, Peter; Morgan, Lauren; New, Steve; Catchpole, Ken; Roberston, Eleanor; Hadi, Mohammed; Pickering, Sharon; Collins, Gary; Griffin, Damian

2017-01-01

Patient safety improvement interventions usually address either work systems or team culture. We do not know which is more effective, or whether combining approaches is beneficial. To compare improvement in surgical team performance after interventions addressing teamwork culture, work systems, or both. Suite of 5 identical controlled before-after intervention studies, with preplanned analysis of pooled data for indirect comparisons of strategies. Operating theatres in 5 UK hospitals performing elective orthopedic, plastic, or vascular surgery PARTICIPANTS:: All operating theatres staff, including surgeons, nurses, anaesthetists, and others INTERVENTIONS:: 4-month safety improvement interventions, using teamwork training (TT), systems redesign and standardization (SOP), Lean quality improvement, SOP + TT combination, or Lean + TT combination. Team technical and nontechnical performance and World Health Organization (WHO) checklist compliance, measured for 3 months before and after intervention using validated scales. Pooled data analysis of before-after change in active and control groups, comparing combined versus single and systems versus teamwork interventions, using 2-way ANOVA. We studied 453 operations, (255 intervention, 198 control). TT improved nontechnical skills and WHO compliance (P < 0.001), but not technical performance; systems interventions (Lean & SOP, 2 & 3) improved nontechnical skills and technical performance (P < 0.001) but improved WHO compliance less. Combined interventions (4 & 5) improved all performance measures except WHO time-out attempts, whereas single approaches (1 & 2 & 3) improved WHO compliance less (P < 0.001) and failed to improve technical performance. Safety interventions combining teamwork training and systems rationalization are more effective than those adopting either approach alone. This has important implications for safety improvement strategies in hospitals.

Are general surgeons able to accurately self-assess their level of technical skills?

PubMed

Rizan, C; Ansell, J; Tilston, T W; Warren, N; Torkington, J

2015-11-01

Self-assessment is a way of improving technical capabilities without the need for trainer feedback. It can identify areas for improvement and promote professional medical development. The aim of this review was to identify whether self-assessment is an accurate form of technical skills appraisal in general surgery. The PubMed, MEDLINE(®), Embase(™) and Cochrane databases were searched for studies assessing the reliability of self-assessment of technical skills in general surgery. For each study, we recorded the skills assessed and the evaluation methods used. Common endpoints between studies were compared to provide recommendations based on the levels of evidence. Twelve studies met the inclusion criteria from 22,292 initial papers. There was no level 1 evidence published. All papers compared the correlation between self-appraisal versus an expert score but differed in the technical skills assessment and the evaluation tools used. The accuracy of self-assessment improved with increasing experience (level 2 recommendation), age (level 3 recommendation) and the use of video playback (level 3 recommendation). Accuracy was reduced by stressful learning environments (level 2 recommendation), lack of familiarity with assessment tools (level 3 recommendation) and in advanced surgical procedures (level 3 recommendation). Evidence exists to support the reliability of self-assessment of technical skills in general surgery. Several variables have been shown to affect the accuracy of self-assessment of technical skills. Future work should focus on evaluating the reliability of self-assessment during live operating procedures.

Simulated procedure rehearsal is more effective than a preoperative generic warm-up for endovascular procedures.

PubMed

Willaert, Willem I M; Aggarwal, Rajesh; Daruwalla, Farhad; Van Herzeele, Isabelle; Darzi, Ara W; Vermassen, Frank E; Cheshire, Nicholas J

2012-06-01

Patient-specific simulated rehearsal (PsR) of a carotid artery stenting procedure (CAS) enables the interventionalist to rehearse the case before performing the procedure on the actual patient by incorporating patient-specific computed tomographic data into the simulation software. This study aimed to evaluate whether PsR of a CAS procedure can enhance the operative performance versus a virtual reality (VR) generic CAS warm-up procedure or no preparation at all. During a 10-session cognitive/technical VR course, medical residents were trained in CAS. Thereafter, in a randomized crossover study, each participant performed a patient-specific CAS case 3 times on the simulator, preceded by 3 different tasks: a PsR, a generic case, or no preparation. Technical performances were assessed using simulator-based metrics and expert-based ratings. Twenty medical residents (surgery, cardiology, radiology) were recruited. Training plateaus were observed after 10 sessions for all participants. Performances were significantly better after PsR than after a generic warm-up or no warm-up for total procedure time (16.3 ± 0.6 vs 19.7 ± 1.0 vs 20.9 ± 1.1 minutes, P = 0.001) and fluoroscopy time (9.3 ± 0.1 vs 11.2 ± 0.6 vs 11.2 ± 0.5 minutes, P = 0.022) but did not influence contrast volume or number of roadmaps used during the "real" case. PsR significantly improved the quality of performance as measured by the expert-based ratings (scores 28 vs 25 vs 25, P = 0.020). Patient-specific simulated rehearsal of a CAS procedure significantly improves operative performance, compared to a generic VR warm-up or no warm-up. This technology requires further investigation with respect to improved outcomes on patients in the clinical setting.

Teleworking in connection with technical aids for disabled persons.

PubMed

Alimandi, L; Andrich, R; Porqueddu, B

1995-01-01

An experimental teleworking arrangement was established between Milan and Rome in order to evaluate the use of multimedia technology and remote working for improving the service provided by an information and advice centre for the disabled. This activity requires a highly interdisciplinary approach and both clinical and technical expertise. The hypothesis was that offering the lone expert in Rome the possibility of teleconsulting with colleagues in Milan (where the whole range of expertise was available) would provide a comprehensive service for disabled clients asking for advice on technical aids in Rome. The results of an experiment demonstrated the feasibility of such teleworking and allowed a teleconsulting method to be defined that fits the specific needs of the technical-aid information service and improves quality.

Effects of a Velocity-Vector Based Command Augmentation System and Synthetic Vision System Terrain Portrayal and Guidance Symbology Concepts on Single-Pilot Performance

NASA Technical Reports Server (NTRS)

Liu, Dahai; Goodrich, Kenneth H.; Peak, Bob

2010-01-01

This study investigated the effects of synthetic vision system (SVS) concepts and advanced flight controls on the performance of pilots flying a light, single-engine general aviation airplane. We evaluated the effects and interactions of two levels of terrain portrayal, guidance symbology, and flight control response type on pilot performance during the conduct of a relatively complex instrument approach procedure. The terrain and guidance presentations were evaluated as elements of an integrated primary flight display system. The approach procedure used in the study included a steeply descending, curved segment as might be encountered in emerging, required navigation performance (RNP) based procedures. Pilot performance measures consisted of flight technical performance, perceived workload, perceived situational awareness and subjective preference. The results revealed that an elevation based generic terrain portrayal significantly improved perceived situation awareness without adversely affecting flight technical performance or workload. Other factors (pilot instrument rating, control response type, and guidance symbology) were not found to significantly affect the performance measures.

Improving performance by anchoring movement and "nerves".

PubMed

Iso-Ahola, Seppo E; Dotson, Charles O; Jagodinsky, Adam E; Clark, Lily C; Smallwood, Lorraine L; Wilburn, Christopher; Weimar, Wendi H; Miller, Matthew W

2016-10-01

Golf's governing bodies' recent decision to ban all putting styles "anchoring one end of the club against the body" bridges an important practical problem with psychological theory. We report the first experiment testing whether anchoring provides technical and/or psychological advantage in competitive performance. Many "greats" of professional golf from Arnold Palmer and Jack Nicklaus to Tiger Woods have argued against anchoring, believing that it takes "nerves" out of competitive performance and therefore artificially levels the playing field. To shed more light on the issue, we tested participants' performance with anchored and unanchored putters under low and high pressure when controlling for the putter length. We found no statistically significant evidence for a technical advantage due to anchoring but a clear psychological advantage: participants who anchored their putters significantly outperformed unanchored counterparts under high, but not low, pressure. Results provide tentative evidence for the ban's justification from a competitive standpoint. However, before any definite conclusions can be made, more research is needed when using high-level golfers. Copyright © 2016 Elsevier B.V. All rights reserved.

Progress in Scientific and Technical Communications, 1968 Annual Report.

ERIC Educational Resources Information Center

Federal Council for Science and Technology, Washington, DC. Committee on Scientific and Technical Information.

This sixth annual report describes progress achieved by the Federal Government in improving the communication of scientific and technical information to support and enhance national science and technology. Included in the report are details regarding the scientific and technical activities of individual Federal Agencies, such as the Atomic Energy…

75 FR 9193 - Office of Special Education and Rehabilitative Services; Overview Information; Assistive...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... Information; Assistive Technology Act of 1998, as Amended--National Activities--State Training and Technical... requirement to support training and technical assistance to the entities funded under the AT Act to improve... applications that meet this priority. This priority is: State Training and Technical Assistance for Assistive...

The Effects of Integrating On-Going Training for Technical Documentation Teams

ERIC Educational Resources Information Center

Catanio, Joseph T.; Catanio, Teri L.

2010-01-01

The tools and techniques utilized in the technical communications profession are constantly improving and changing. Information Technology (IT) organizations devote the necessary resources to equip and train engineering, marketing, and sales teams, but often fail to do so for technical documentation teams. Many IT organizations tend to view…

A Sharper Focus on Technical Workers: How to Educate and Train for the Global Economy

ERIC Educational Resources Information Center

Lamos, Erin; Simon, Martin; Waits, Mary Jo

2010-01-01

This report presents a case study of the Automotive Manufacturing Technical Education Collaborative (AMTEC), which brings together auto manufacturers and community colleges across 12 states to identify and implement wide-ranging improvements in technical education for automotive manufacturing workers. A "Big Collaboration"--AMTEC…

Extracellular Matrix and Growth Factors Improve the Efficacy of Intramuscular Islet Transplantation.

PubMed

Tsuchiya, Haruyuki; Sakata, Naoaki; Yoshimatsu, Gumpei; Fukase, Masahiko; Aoki, Takeshi; Ishida, Masaharu; Katayose, Yu; Egawa, Shinichi; Unno, Michiaki

2015-01-01

The efficacy of intramuscular islet transplantation is poor despite being technically simple, safe, and associated with reduced rates of severe complications. We evaluated the efficacy of combined treatment with extracellular matrix (ECM) and growth factors in intramuscular islet transplantation. Male BALB/C mice were used for the in vitro and transplantation studies. The following three groups were evaluated: islets without treatment (islets-only group), islets embedded in ECM with growth factors (Matrigel group), and islets embedded in ECM without growth factors [growth factor-reduced (GFR) Matrigel group]. The viability and insulin-releasing function of islets cultured for 96 h were significantly improved in Matrigel and GFR Matrigel groups compared with the islets-only group. Blood glucose and serum insulin levels immediately following transplantation were significantly improved in the Matrigel and GFR Matrigel groups and remained significantly improved in the Matrigel group at postoperative day (POD) 28. On histological examination, significantly decreased numbers of TdT-mediated deoxyuridine triphosphate-biotin nick end labeling-positive islet cells and significantly increased numbers of Ki67-positive cells were observed in the Matrigel and GFR Matrigel groups at POD 3. Peri-islet revascularization was most prominent in the Matrigel group at POD 14. The efficacy of intramuscular islet transplantation was improved by combination treatment with ECM and growth factors through the inhibition of apoptosis, increased proliferation of islet cells, and promotion of revascularization.

Balancing Career and Technical Education with Academic Coursework: The Consequences for Mathematics Achievement in High School

ERIC Educational Resources Information Center

Bozick, Robert; Dalton, Benjamin

2013-01-01

Federal legislation has attempted to move career and technical education (CTE) from a segregated component of the high school curriculum to an integrated element that jointly improves both academic and career readiness. However, concerns remain about the ability of CTE to improve academic learning. Using a nationally representative sample of high…

Improving the Basic Skills of Vocational-Technical Students: An Administrator's Guide. Competency-Based Vocational Education Administrator Module Series.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This guide provides information and guidelines intended to assist vocational administrators in developing and evaluating programs to improve the basic skills of vocational-technical students. Part one provides background information about basic skills and examines their role in vocational education. Discussed next are various program types,…

Supporting the extensive dairy sheep smallholders of the semi-arid region of Crete through technical intervention.

PubMed

Volanis, M; Stefanakis, A; Hadjigeorgiou, I; Zoiopoulos, P

2007-06-01

The objective of this field study was to depict the extensive system of dairy sheep farming in the semi-arid environment of the island of Crete and to assess the potential margins of improvement through technical intervention. Forty-three family-run farms keeping a total of 13,870 sheep were surveyed in seven representative areas of the island. Several parameters were dealt with, concerning socio-economy, flock management and productivity. Study areas differed widely regarding feeds supplied per sheep, land cultivated for feeds, grazing land utilized and housing space. A range of parameters were recorded on flock size and their production characteristics such as births, fertility and number of lambs weaned. Milk yield and parameters associated with milk quality, such as somatic cell counts and total microbial flora, were also recorded. Technical intervention was directed towards removal of non-productive animals, programming of matings, balancing of diets, management of grazing lands and health care. Ewe fertility and numbers of lambs weaned per ewe, as well as harvested milk and milk quality (based on somatic cell counts and microbial load of milk) were also significantly improved. Information derived from this study stresses the important role of extension services to small farm sustainability and contributes to our knowledge of the dairy sheep farming systems in countries around the Mediterranean and elsewhere.

Effectiveness of Virtual Reality Training in Orthopaedic Surgery.

PubMed

Aïm, Florence; Lonjon, Guillaume; Hannouche, Didier; Nizard, Rémy

2016-01-01

The purpose of this study was to conduct a systematic review to determine the effectiveness of virtual reality (VR) training in orthopaedic surgery. A comprehensive systematic review was performed of articles of VR training in orthopaedic surgery published up to November 2014 from MEDLINE, EMBASE, and the Cochrane Central Register of Controlled Trials databases. We included 10 relevant trials of 91 identified articles, which all reported on training in arthroscopic surgery (shoulder, n = 5; knee, n = 4; undefined, n = 1). A total of 303 participants were involved. Assessment after training was made on a simulator in 9 of the 10 studies, and in one study it took place in the operating room (OR) on a real patient. A total of 32 different outcomes were extracted; 29 of them were about skills assessment. None involved a patient-related outcome. One study focused on anatomic learning, and the other evaluated technical task performance before and after training on a VR simulator. Five studies established construct validity. Three studies reported a statistically significant improvement in technical skills after training on a VR simulator. VR training leads to an improvement of technical skills in orthopaedic surgery. Before its widespread use, additional trials are needed to clarify the transfer of VR training to the OR. Systematic review of Level I through Level IV studies. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Introduction of the non-technical skills for surgeons (NOTSS) system in a Japanese cancer center.

PubMed

Tsuburaya, Akira; Soma, Takahiro; Yoshikawa, Takaki; Cho, Haruhiko; Miki, Tamotsu; Uramatsu, Masashi; Fujisawa, Yoshikazu; Youngson, George; Yule, Steven

2016-12-01

Non-technical skills rating systems, which are designed to support surgical performance, have been introduced worldwide, but not officially in Japan. We performed a pilot study to evaluate the "non-technical skills for surgeons" (NOTSS) rating system in a major Japanese cancer center. Upper gastrointestinal surgeons were selected as trainers or trainees. The trainers attended a master-class on NOTSS, which included simulated demo-videos, to promote consistency across the assessments. The trainers thereafter commenced observing the trainees and whole teams, utilizing the NOTSS and "observational teamwork assessment for surgery" (OTAS) rating systems, before and after their education. Four trainers and six trainees were involved in this study. Test scores for understanding human factors and the NOTSS system were 5.89 ± 1.69 and 8.00 ± 1.32 before and after the e-learning, respectively (mean ± SD, p = 0.010). The OTAS scores for the whole team improved significantly after the trainees' education in five out of nine stages (p < 0.05). There were no differences in the NOTSS scores before and after education, with a small improvement in the total scores for the "teamwork and communication" and "leadership" categories. These findings demonstrate that implementing the NOTSS system is feasible in Japan. Education of both surgical trainers and trainees would contribute to better team performance.

Do failures in non-technical skills contribute to fatal medical accidents in Japan? A review of the 2010-2013 national accident reports.

PubMed

Uramatsu, Masashi; Fujisawa, Yoshikazu; Mizuno, Shinya; Souma, Takahiro; Komatsubara, Akinori; Miki, Tamotsu

2017-02-16

We sought to clarify how large a proportion of fatal medical accidents can be considered to be caused by poor non-technical skills, and to support development of a policy to reduce number of such accidents by making recommendations about possible training requirements. Summaries of reports of fatal medical accidents, published by the Japan Medical Safety Research Organization, were reviewed individually. Three experienced clinicians and one patient safety expert conducted the reviews to determine the cause of death. Views of the patient safety expert were given additional weight in the overall determination. A total of 73 summary reports of fatal medical accidents were reviewed. These reports had been submitted by healthcare organisations across Japan to the Japan Medical Safety Research Organization between April 2010 and March 2013. The cause of death in fatal medical accidents, categorised into technical skills, non-technical skills and inevitable progress of disease were evaluated. Non-technical skills were further subdivided into situation awareness, decision making, communication, team working, leadership, managing stress and coping with fatigue. Overall, the cause of death was identified as non-technical skills in 34 cases (46.6%), disease progression in 33 cases (45.2%) and technical skills in two cases (5.5%). In two cases, no consensual determination could be achieved. Further categorisation of cases of non-technical skills were identified as 14 cases (41.2%) of problems with situation awareness, eight (23.5%) with team working and three (8.8%) with decision making. These three subcategories, or combinations of them, were identified as the cause of death in 33 cases (97.1%). Poor non-technical skills were considered to be a significant cause of adverse events in nearly half of the fatal medical accidents examined. Improving non-technical skills may be effective for reducing accidents, and training in particular subcategories of non-technical skills may be especially relevant. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Multiparametric prostate MRI: technical conduct, standardized report and clinical use.

PubMed

Manfredi, Matteo; Mele, Fabrizio; Garrou, Diletta; Walz, Jochen; Fütterer, Jurgen J; Russo, Filippo; Vassallo, Lorenzo; Villers, Arnauld; Emberton, Mark; Valerio, Massimo

2018-02-01

Multiparametric prostate MRI (mp-MRI) is an emerging imaging modality for diagnosis, characterization, staging, and treatment planning of prostate cancer (PCa). The technique, results reporting, and its role in clinical practice have been the subject of significant development over the last decade. Although mp-MRI is not yet routinely used in the diagnostic pathway, almost all urological guidelines have emphasized the potential role of mp-MRI in several aspects of PCa management. Moreover, new MRI sequences and scanning techniques are currently under evaluation to improve the diagnostic accuracy of mp-MRI. This review presents an overview of mp-MRI, summarizing the technical applications, the standardized reporting systems used, and their current roles in various stages of PCa management. Finally, this critical review also reports the main limitations and future perspectives of the technique.

Effects of technical editing in biomedical journals: a systematic review.

PubMed

Wager, Elizabeth; Middleton, Philippa

2002-06-05

Technical editing supposedly improves the accuracy and clarity of journal articles. We examined evidence of its effects on research reports in biomedical journals. Subset of a systematic review using Cochrane methods, searching MEDLINE, EMBASE, and other databases from earliest entries to February 2000 by using inclusive search terms; hand searching relevant journals. We selected comparative studies of the effects of editorial processes on original research articles between acceptance and publication in biomedical journals. Two reviewers assessed each study and performed independent data extraction. The 11 studies on technical editing indicate that it improves the readability of articles slightly (as measured by Gunning Fog and Flesch reading ease scores), may improve other aspects of their quality, can increase the accuracy of references and quotations, and raises the quality of abstracts. Supplying authors with abstract preparation instructions had no discernible effect. Considering the time and resources devoted to technical editing, remarkably little is know about its effects or the effects of imposing different house styles. Studies performed at 3 journals employing relatively large numbers of professional technical editors suggest that their editorial processes are associated with increases in readability and quality of articles, but these findings may not be generalizable to other journals.

Technology, energy and the environment

NASA Astrophysics Data System (ADS)

Mitchell, Glenn Terry

This dissertation consists of three distinct papers concerned with technology, energy and the environment. The first paper is an empirical analysis of production under uncertainty, using agricultural production data from the central United States. Unlike previous work, this analysis identifies the effect of actual realizations of weather as well as farmers' expectations about weather. The results indicate that both of these are significant factors explaining short run profits in agriculture. Expectations about weather, called climate, affect production choices, and actual weather affects realized output. These results provide better understanding of the effect of climate change in agriculture. The second paper examines how emissions taxes induce innovation that reduces pollution. A polluting firm chooses technical improvement to minimize cost over an infinite horizon, given an emission tax set by a planner. This leads to a solution path for technical change. Changes in the tax rate affect the path for innovation. Setting the tax at equal to the marginal damage (which is optimal in a static setting with no technical change) is not optimal in the presence of technical change. When abatement is also available as an alternative to technical change, changes in the tax can have mixed effects, due to substitution effects. The third paper extends the theoretical framework for exploring the diffusion of new technologies. Information about new technologies spreads through the economy by means of a network. The pattern of diffusion will depend on the structure of this network. Observed networks are the result of an evolutionary process. This paper identifies how these evolutionary outcomes compare with optimal solutions. The conditions guaranteeing convergence to an optimal outcome are quite stringent. It is useful to determine the set of initial population states that do converge to an optimal outcome. The distribution of costs and benefits among the agents within an information processing structure plays a critical role in defining this set. These distributional arrangements represent alternative institutional regimes. Institutional changes can improve outcomes, free the flow of information, and encourage the diffusion of profitable new technologies.

Training Employers to Implement Health Promotion Programs: Results From the CDC Work@Health® Program.

PubMed

Cluff, Laurie A; Lang, Jason E; Rineer, Jennifer R; Jones-Jack, Nkenge H; Strazza, Karen M

2018-05-01

Centers for Disease Control and Prevention (CDC) initiated the Work@Health Program to teach employers how to improve worker health using evidence-based strategies. Program goals included (1) determining the best way(s) to deliver employer training, (2) increasing employers' knowledge of workplace health promotion (WHP), and (3) increasing the number of evidence-based WHP interventions at employers' worksites. This study is one of the few to examine the effectiveness of a program designed to train employers how to implement WHP programs. Pre- and posttest design. Training via 1 of 3 formats hands-on, online, or blended. Two hundred six individual participants from 173 employers of all sizes. Eight-module training curriculum to guide participants through building an evidence-based WHP program, followed by 6 to 10 months of technical assistance. The CDC Worksite Health ScoreCard and knowledge, attitudes, and behavior survey. Descriptive statistics, paired t tests, and mixed linear models. Participants' posttraining mean knowledge scores were significantly greater than the pretraining scores (61.1 vs 53.2, P < .001). A year after training, employers had significantly increased the number of evidence-based interventions in place (47.7 vs 35.5, P < .001). Employers' improvements did not significantly differ among the 3 training delivery formats. The Work@Health Program provided employers with knowledge to implement WHP interventions. The training and technical assistance provided structure, practical guidance, and tools to assess needs and select, implement, and evaluate interventions.

Technical Standards for Nursing Education Programs in the 21st Century.

PubMed

Ailey, Sarah H; Marks, Beth

The Institute of Medicine (2000, 2002) exposed serious safety problems in the health system and called for total qualitative system change. The Institute of Medicine (2011, 2015) also calls for improving the education of nurses to provide leadership for a redesigned health system. Intertwined with improving education is the need to recruit and retain diverse highly qualified students. Disability is part of diversity inclusion, but current technical standards (nonacademic requirements) for admission to many nursing programs are a barrier to the entry of persons with disabilities. Rehabilitation nurse leaders are in a unique position to improve disability diversity in nursing. The purpose of this paper is to discuss the importance of disability diversity in nursing. The history of existing technical standards used in many nursing programs is reviewed along with examples. On the basis of the concept that disability inclusion is a part of diversity inclusion, we propose a new model of technical standards for nursing education. Rehabilitation nurse leaders can lead in eliminating barriers to persons with disabilities entering nursing.

NASA Engineering Excellence: A Case Study on Strengthening an Engineering Organization

NASA Technical Reports Server (NTRS)

Shivers, C. Herbert; Wessel, Vernon W.

2006-01-01

NASA implemented a system of technical authority following the Columbia Accident Investigation Board (CAE) report calling for independent technical authority to be exercised on the Space Shuttle Program activities via a virtual organization of personnel exercising specific technical authority responsibilities. After the current NASA Administrator reported for duty, and following the first of two planned "Shuttle Return to Flight" missions, the NASA Chief Engineer and the Administrator redirected the Independent Technical Authority to a program of Technical Excellence and Technical Authority exercised within the existing engineering organizations. This paper discusses the original implementation of technical authority and the transition to the new implementation of technical excellence, including specific measures aimed at improving safety of future Shuttle and space exploration flights.

Data Acquisition Systems

NASA Technical Reports Server (NTRS)

1989-01-01

Technology developed during a joint research program with Langley and Kinetic Systems Corporation led to Kinetic Systems' production of a high speed Computer Automated Measurement and Control (CAMAC) data acquisition system. The study, which involved the use of CAMAC equipment applied to flight simulation, significantly improved the company's technical capability and produced new applications. With Digital Equipment Corporation, Kinetic Systems is marketing the system to government and private companies for flight simulation, fusion research, turbine testing, steelmaking, etc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solar-Lezama, Armando

The goal of the project was to develop a programming model that would significantly improve productivity in the high-performance computing domain by bringing together three components: a) Automated equivalence checking, b) Sketch-based program synthesis, and c) Autotuning. The report provides an executive summary of the research accomplished through this project. At the end of the report is appended a paper that describes in more detail the key technical accomplishments from this project, and which was published in SC 2014.

Automation pilot

NASA Technical Reports Server (NTRS)

1983-01-01

An important concept of the Action Information Management System (AIMS) approach is to evaluate office automation technology in the context of hands on use by technical program managers in the conduct of human acceptance difficulties which may accompany the transition to a significantly changing work environment. The improved productivity and communications which result from application of office automation technology are already well established for general office environments, but benefits unique to NASA are anticipated and these will be explored in detail.

Security practices and regulatory compliance in the healthcare industry.

PubMed

Kwon, Juhee; Johnson, M Eric

2013-01-01

Securing protected health information is a critical responsibility of every healthcare organization. We explore information security practices and identify practice patterns that are associated with improved regulatory compliance. We employed Ward's cluster analysis using minimum variance based on the adoption of security practices. Variance between organizations was measured using dichotomous data indicating the presence or absence of each security practice. Using t tests, we identified the relationships between the clusters of security practices and their regulatory compliance. We utilized the results from the Kroll/Healthcare Information and Management Systems Society telephone-based survey of 250 US healthcare organizations including adoption status of security practices, breach incidents, and perceived compliance levels on Health Information Technology for Economic and Clinical Health, Health Insurance Portability and Accountability Act, Red Flags rules, Centers for Medicare and Medicaid Services, and state laws governing patient information security. Our analysis identified three clusters (which we call leaders, followers, and laggers) based on the variance of security practice patterns. The clusters have significant differences among non-technical practices rather than technical practices, and the highest level of compliance was associated with hospitals that employed a balanced approach between technical and non-technical practices (or between one-off and cultural practices). Hospitals in the highest level of compliance were significantly managing third parties' breaches and training. Audit practices were important to those who scored in the middle of the pack on compliance. Our results provide security practice benchmarks for healthcare administrators and can help policy makers in developing strategic and practical guidelines for practice adoption.

Security practices and regulatory compliance in the healthcare industry

PubMed Central

Kwon, Juhee; Johnson, M Eric

2013-01-01

Objective Securing protected health information is a critical responsibility of every healthcare organization. We explore information security practices and identify practice patterns that are associated with improved regulatory compliance. Design We employed Ward's cluster analysis using minimum variance based on the adoption of security practices. Variance between organizations was measured using dichotomous data indicating the presence or absence of each security practice. Using t tests, we identified the relationships between the clusters of security practices and their regulatory compliance. Measurement We utilized the results from the Kroll/Healthcare Information and Management Systems Society telephone-based survey of 250 US healthcare organizations including adoption status of security practices, breach incidents, and perceived compliance levels on Health Information Technology for Economic and Clinical Health, Health Insurance Portability and Accountability Act, Red Flags rules, Centers for Medicare and Medicaid Services, and state laws governing patient information security. Results Our analysis identified three clusters (which we call leaders, followers, and laggers) based on the variance of security practice patterns. The clusters have significant differences among non-technical practices rather than technical practices, and the highest level of compliance was associated with hospitals that employed a balanced approach between technical and non-technical practices (or between one-off and cultural practices). Conclusions Hospitals in the highest level of compliance were significantly managing third parties’ breaches and training. Audit practices were important to those who scored in the middle of the pack on compliance. Our results provide security practice benchmarks for healthcare administrators and can help policy makers in developing strategic and practical guidelines for practice adoption. PMID:22955497

Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

NASA Astrophysics Data System (ADS)

Phuong, Vu Hung

2018-03-01

This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

Tactical and operational response to major incidents: feasibility and reliability of skills assessment using novel virtual environments.

PubMed

Cohen, Daniel; Sevdalis, Nick; Patel, Vishal; Taylor, Michael; Lee, Henry; Vokes, Mick; Heys, Mick; Taylor, David; Batrick, Nicola; Darzi, Ara

2013-07-01

To determine feasibility and reliability of skills assessment in a multi-agency, triple-site major incident response exercise carried out in a virtual world environment. Skills assessment was carried out across three scenarios. The pre-hospital scenario required paramedics to triage and treat casualties at the site of an explosion. Technical skills assessment forms were developed using training syllabus competencies and national guidelines identified by pre-hospital response experts. Non-technical skills were assessed using a seven-point scale previously developed for use by pre-hospital paramedics. The two in-hospital scenarios, focusing on a trauma team leader and a silver/clinical major incident co-ordinator, utilised the validated Trauma-NOTECHS scale to assess five domains of performance. Technical competencies were assessed using an ATLS-style competency scale for the trauma scenario. For the silver scenario, the assessment document was developed using competencies described from a similar role description in a real-life hospital major incident plan. The technical and non-technical performance of all participants was assessed live by two experts in each of the three scenarios and inter-assessor reliability was computed. Participants also self-assessed their performance using identical proformas immediately after the scenarios were completed. Self and expert assessments were correlated (assessment cross-validation). Twenty-three participants underwent all scenarios and assessments. Performance assessments were feasible for both experts as well as the participants. Non-technical performance was generally scored higher than technical performance. Very good inter-rater reliability was obtained between expert raters across all scenarios and both technical and non-technical aspects of performance (reliability range 0.59-0.90, Ps<0.01). Significant positive correlations were found between self and expert assessment in technical skills across all three scenarios (correlation range 0.52-0.84, Ps<0.05), although no such correlations were observed in non-technical skills. This study establishes feasibility and reliability of virtual environment technical and non-technical skills assessment in major incident scenarios for the first time. The development for further scenarios and validated assessment scales will enable major incident planners to utilise virtual technologies for improved major incident preparation and training. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Career Technical Education Pathways Initiative Annual Report

ERIC Educational Resources Information Center

California Community Colleges, Chancellor's Office, 2014

2014-01-01

California's education system--the largest in the United States--is an essential resource for ensuring strong economic growth in the state. The Career Technical Education Pathways Initiative (the Initiative) became law in 2005 with Senate Bills 70 and 1133 and provided more than $380 million over eight years to improve career technical education…

77 FR 38509 - Approval and Promulgation of Implementation Plans; South Carolina; Regional Haze State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... Carolina's 2018 projections are based on the State's technical analysis of the anticipated emissions rates... haze technical analyses was developed by the Visibility Improvement State and Tribal Association of the... appropriate documentation in its SIP of the technical analysis it used to assess the need for and...

Improving Technical Vocational Education and Training in the Kurdistan Region--Iraq

ERIC Educational Resources Information Center

Constant, Louay; Culbertson, Shelly; Stasz, Cathleen; Vernez, Georges

2014-01-01

As Iraq's Kurdistan region develops rapidly, it is creating jobs that require a solid education and technical skills. The government has launched an ambitious reform of basic and secondary education to increase its quality and has expanded opportunities for tertiary technical and university education. But expansion of secondary vocational…

An Integrated Bibliographic Information System: Concept and Application for Resource Sharing in Special Libraries.

ERIC Educational Resources Information Center

Cotter, Gladys A.; And Others

The Defense Department Scientific and Technical Information (STI) network is composed of over 200 technical libraries and information centers tied together by the Defense Technical Information Center (DTIC), an organization which seeks to improve the flow of information throughout the STI network by promoting shared cataloging and integrated…

78 FR 35877 - Applications for New Awards; Native Hawaiian Career and Technical Education Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-14

... attain career and technical skills; (7) The use of student assessment and evaluation data to improve... the industry the student is preparing to enter; (iv) Activities, during the formative stages of the... students' technical assessments, by type and scores, if available; (vii) The rates of attainment of a...

Testing Services

NASA Technical Reports Server (NTRS)

1993-01-01

Trace Laboratories is an independent testing laboratory specializing in testing printed circuit boards, automotive products and military hardware. Technical information from NASA Tech Briefs and two subsequent JPL Technical Support packages have assisted Trace in testing surface insulation resistance on printed circuit board materials. Testing time was reduced and customer service was improved because of Jet Propulsion Laboratory technical support packages.

Collaborating for Success: Team Teaching the Engineering Technical Thesis

ERIC Educational Resources Information Center

Keating, Terrence; Long, Mike

2012-01-01

This paper will examine the collaborative teaching process undertaken at College of the North Atlantic-Qatar (CNA-Q) by Engineering and the Communication faculties to improve the overall quality of engineering students' capstone projects known as the Technical Thesis. The Technical Thesis is divided into two separate components: a proposal stage…

An Analysis of Gateway Technical College Instructors' Opinions on Secondary and Postsecondary Program Alignment

ERIC Educational Resources Information Center

Albrecht, Bryan D.

2011-01-01

The purpose of this study was to determine what opinions Gateway Technical College instructors had toward secondary and postsecondary program alignment. Student transition is critical to supporting the mission and vision of Gateway Technical College. The impetus for this study was twofold. First, the quality improvement process established at…

[A study of the occupational stress norm and it' s application for the technical group and scientific research group].

PubMed

Yang, Xin-wei; Liu, Ze-jun; Zhao, Pei-qing; Bai, Shao-ying; Pang, Xing-huo; Wang, Zhi-ming; Jin, Tai-yi; Lan, Ya-jia

2006-11-01

A study of the occupational stress norm and it' s application for the technical group and scientific research group. In this study, cross-sectional study method is used, and a synthetic way of sorting and randomized sampling is adopted to deal with research targets(235 scientific research group, 857 technical group). Descriptive statistics for OSI-R scale scores for the technical group and scientific research group were modulated. Scale raw score to T-score conversion tables derived from the OSI-R normative sample for technical group and scientific research group were established. OSI-R profile from for technical group and scientific research group were established. For the ORQ and PSQ scales, scores at or above 70T indicate a strong levels of maladaptive stress and strain. Score in the range of 60T to 69T suggest middle levels of maladaptive stress and strain. Score in the range of 40T to 59T indicate normal levels of stress and strain. Score below 40T indicate a relative absence of occupational stress and strain. For the PRQ scales, score below 30T indicate a significant lack of coping resources. Score in the range of 30T to 39T suggest middle deficits in coping resources. Score in the range of 40T to 59T indicate average coping resources. Scores at or above 60T indicate a strong levels of coping resources. Different intervention measure should be take to reduce the occupational stress so as to improve the work ability.

78 FR 63271 - Request for Public Comments to Compile the Report on Technical Barriers to Trade

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-23

... on Technical Barriers to Trade AGENCY: Office of the United States Trade Representative. ACTION... 2014 a Report on Technical Barriers to Trade (TBT Report) identifying and analyzing significant... requesting interested persons to submit written comments to assist it in identifying significant standards...

Plug-Assisted Retrograde Transvenous Obliteration for the Treatment of Gastric Variceal Hemorrhage

PubMed Central

Chang, Min-Yung; Kim, Taehwan; Shin, Wonseon; Shin, Minwoo; Kim, Gyoung Min; Won, Jong Yun; Park, Sung Il; Lee, Do Yun

2016-01-01

Objective To evaluate the feasibility, safety, and clinical outcomes of plug-assisted retrograde transvenous obliteration (PARTO) to treat gastric variceal hemorrhage in patients with portal hypertension. Materials and Methods From May 2012 to June 2014, 19 patients (11 men and 8 women, median age; 61, with history of gastric variceal hemorrhage; 17, active bleeding; 2) who underwent PARTO using a vascular plug and a gelfoam pledget were retrospectively analyzed. Clinical and laboratory data were examined to evaluate primary (technical and clinical success, complications) and secondary (worsening of esophageal varix [EV], change in liver function) end points. Median follow-up duration was 11 months, from 6.5 to 18 months. The Wilcoxon signed-rank test was used to compare laboratory data before and after the procedure. Results Technical success (complete occlusion of the efferent shunt and complete filling of gastric varix [GV] with a gelfoam slurry) was achieved in 18 of 19 (94.7%) patients. The embolic materials could not reach the GV in 1 patient who had endoscopic glue injection before our procedure. The clinical success rate (no recurrence of gastric variceal bleeding) was the same because the technically failed patient showed recurrent bleeding later. Acute complications included fever (n = 2), fever and hypotension (n = 2; one diagnosed adrenal insufficiency), and transient microscopic hematuria (n = 3). Ten patients underwent follow-up endoscopy; all exhibited GV improvement, except 2 without endoscopic change. Five patients exhibited aggravated EV, and 2 of them had a bleeding event. Laboratory findings were significantly improved after PARTO. Conclusion PARTO is technically feasible, safe, and effective for gastric variceal hemorrhage in patients with portal hypertension. PMID:26957908

Effective Instructional Leadership Act--Technical Assistance Manual for Instructional Leaders, and Training Program Providers, July 1, 2004-June 30, 2006.

ERIC Educational Resources Information Center

Kentucky Department of Education, 2004

2004-01-01

The Kentucky Department of Education, Office of Leadership and School Improvement developed this revised and updated technical assistance manual for the 2004-2006 Effective Instructional Leadership Act (EILA) cycle to assist local educators as they strive to improve the quality and effectiveness of their leadership skills and to assist districts…

Smart Start and Preschool Child Care Quality in North Carolina: Change Over Time and Relation to Children's Readiness.

ERIC Educational Resources Information Center

Bryant, Donna; Maxwell, Kelly; Taylor, Karen; Poe, Michele; Peisner-Feinberg, Ellen; Bernier, Kathleen

The primary goal of Smart Start is to ensure that all children enter school healthy and prepared to succeed. Smart Start has funded a variety of technical assistance (TA) activities to improve child care, including on-site technical assistance, quality improvement and facility grant, teacher education scholarships, license upgrades, teacher salary…

Project LIFE--Language Improvement to Facilitate Education. (Technical Progress Report; Third Quarter; March 1, 1974-May 31, 1974).

ERIC Educational Resources Information Center

National Foundation for the Improvement of Education, Washington, DC.

Reported is the third quarter, fiscal year 1974 (March 1, 1974-May 31, 1974) technical progress of Project LIFE (Language Improvement to Facilitate Education), toward developing an instructional system in which filmstrips in the areas of perceptual training, perceptual thinking, and language/reading are used to assist hearing impaired children in…

Towards Quality Technical Vocational Education and Training (Tvet) Programmes in Nigeria: Challenges and Improvement Strategies

ERIC Educational Resources Information Center

Ayonmike, Chinyere Shirley; Okwelle, P. Chijioke; Okeke, Benjamin Chukwumaijem

2015-01-01

Technical Vocational Education and Training (TVET) is widely recognized as a vital driving force for the socio-economic growth and technological development of nations. In achieving the goals and objectives of TVET in Nigeria, the quality of the programme needs to be improved and sustained. The purpose of this study is to ascertain the challenges…

Evaluation of performance and impacts of maternal and child health hospital services using Data Envelopment Analysis in Guangxi Zhuang Autonomous Region, China: a comparison study among poverty and non-poverty county level hospitals.

PubMed

Wang, Xuan; Luo, Hongye; Qin, Xianjin; Feng, Jun; Gao, Hongda; Feng, Qiming

2016-08-23

As the core of the county-level Maternal and Child Health Hospitals (MCHH) in rural areas of China, the service efficiency affects the fairness and availability of healthcare services. This study aims to identify the determinants of hospital efficiency and explore how to improve the performance of MCHH in terms of productivity and efficiency. Data was collected from a sample of 32 county-level MCHHs of Guangxi in 2014. Firstly, we specified and measured the indicators of the inputs and outputs which represent hospital resources expended and its profiles respectively. Then we estimated the efficiency scores using Data Envelopment Analysis (DEA) for each hospital. Efficiency scores were decomposed into technical, scale and congestion components, and the potential output increases and/or input reductions were also estimated in this model, which would make relatively inefficient hospitals more efficient. In the second stage, the estimated efficiency scores are regressed against hospital external and internal environment factors using a Tobit model. We used DEAP (V2.1) and R for data analysis. The average scores of technical efficiency, net technical efficiency (managerial efficiency) and scale efficiency of the hospitals were 0.875, 0.922 and 0.945, respectively. Half of the hospitals were efficient, and 9.4 % and 40.6 % were weakly efficient and inefficient, respectively. Among the low-productiveness hospitals, 61.1 % came from poor counties (Poor counties in this article are in the list of key poverty-stricken counties at the national level, published by The State Council Leading Group Office of Poverty Alleviation and Development, 2012). The total input indicated that redundant medical resources in poverty areas were significantly higher than those in non-poverty areas. The Tobit regression model showed that the technical efficiency was proportional to the total annual incomes, the number of discharge patients, and the number of outpatient and emergency visits, while it was inversely proportional to total expenditure and the actual number of open beds. Technical efficiency was not associated with number of health care workers. The overall operational efficiency of the county-level MCHHs in Guangxi was low and needs to be improved. Regional economic differences affect the performances of hospitals. Health administrations should adjust and optimize the resource investments for the different areas. For the hospitals in poverty areas, policy-makers should not only consider the hardware facilities investment, but also the introduction of advanced techniques and high-level medical personnel to improve their technical efficiency.

A 10 year (2000–2010) systematic review of interventions to improve quality of care in hospitals

PubMed Central

2012-01-01

Background Against a backdrop of rising healthcare costs, variability in care provision and an increased emphasis on patient satisfaction, the need for effective interventions to improve quality of care has come to the fore. This is the first ten year (2000–2010) systematic review of interventions which sought to improve quality of care in a hospital setting. This review moves beyond a broad assessment of outcome significance levels and makes recommendations for future effective and accessible interventions. Methods Two researchers independently screened a total of 13,195 English language articles from the databases PsychInfo, Medline, PubMed, EmBase and CinNahl. There were 120 potentially relevant full text articles examined and 20 of those articles met the inclusion criteria. Results Included studies were heterogeneous in terms of approach and scientific rigour and varied in scope from small scale improvements for specific patient groups to large scale quality improvement programmes across multiple settings. Interventions were broadly categorised as either technical (n = 11) or interpersonal (n = 9). Technical interventions were in the main implemented by physicians and concentrated on improving care for patients with heart disease or pneumonia. Interpersonal interventions focused on patient satisfaction and tended to be implemented by nursing staff. Technical interventions had a tendency to achieve more substantial improvements in quality of care. Conclusions The rigorous application of inclusion criteria to studies established that despite the very large volume of literature on quality of care improvements, there is a paucity of hospital interventions with a theoretically based design or implementation. The screening process established that intervention studies to date have largely failed to identify their position along the quality of care spectrum. It is suggested that this lack of theoretical grounding may partly explain the minimal transfer of health research to date into policy. It is recommended that future interventions are established within a theoretical framework and that selected quality of care outcomes are assessed using this framework. Future interventions to improve quality of care will be most effective when they use a collaborative approach, involve multidisciplinary teams, utilise available resources, involve physicians and recognise the unique requirements of each patient group. PMID:22925835

Standards Advisor-Advanced Information Technology for Advanced Information Delivery

NASA Technical Reports Server (NTRS)

Hawker, J. Scott

2003-01-01

Developers of space systems must deal with an increasing amount of information in responding to extensive requirements and standards from numerous sources. Accessing these requirements and standards, understanding them, comparing them, negotiating them and responding to them is often an overwhelming task. There are resources to aid the space systems developer, such as lessons learned and best practices. Again, though, accessing, understanding, and using this information is often more difficult than helpful. This results in space systems that: 1. Do not meet all their requirements. 2. Do not incorporate prior engineering experience. 3. Cost more to develop. 4. Take longer to develop. The NASA Technical Standards Program (NTSP) web site at http://standards.nasa.gov has made significant improvements in making standards, lessons learned, and related material available to space systems developers agency-wide. The Standards Advisor was conceived to take the next steps beyond the current product, continuing to apply evolving information technology that continues to improve information delivery to space systems developers. This report describes the features of the Standards Advisor and suggests a technical approach to its development.

Chemical Durability Improvement and Static Fatigue of Glasses.

DTIC Science & Technology

1982-08-01

Afl-Alla 837 RENSSELAER POLYIECmfJ!C INST TRtOY NY DEPT OF MATERIAL--ETC F/6 ii/ CHEMICAL DURABILITY IMPROVEMENT AND STATIC FATIGUE OF GLASSESW AUC2...82 M TOMOZAWA NOGGIN 7A-C-0315 UNC LASS IF IED N ENEEEEEE FINAL TECHNICAL REPORT For the period April 1, 1978 "u March 31, 198200 CHEMICAL DURABILITY...REPORT A PERIOD COVERED Chemical Durability Improvement and Static Final Technical Report Fatiue o GlasesApril 1, 1978"’,March 31, 1982 S. PERFORMING ORG

The use of a checklist improves anaesthesiologists' technical and non-technical performance for simulated malignant hyperthermia management.

PubMed

Hardy, Jean-Baptiste; Gouin, Antoine; Damm, Cédric; Compère, Vincent; Veber, Benoît; Dureuil, Bertrand

2018-02-01

Anaesthesiologists may occasionally manage life-threatening operating room (OR) emergencies. Managing OR emergencies implies real-time analysis of often complicated situations, prompt medical knowledge retrieval, coordinated teamwork and effective decision making in stressful settings. Checklists are recommended to improve performance and reduce the risk of medical errors. This study aimed to assess the usefulness of the French Society of Anaesthesia and Intensive Care's (SFAR) "Malignant Hyperthermia" (MH) checklist on a simulated episode of MH crisis and management thereof by registered anesthesiologists. Twenty-four anaesthesiologists were allocated to 2 groups (checklist and control). Their technical performance in adherence with the SFAR guidelines was assessed by a 30-point score and their non-technical performance was assessed by the Anaesthetists' Non-Technical Skills (ANTS) score. Every task completion was assessed independently. Data are shown as median (first-third quartiles). Anaesthesiologists in the checklist group had higher technical performance scores (24/30 (21.5-25) vs 18/30 (15.5-19.5), P=0.002) and ANTS scores (56.5/60 (47.5-58) vs 48.5/60 (41-50.5), P=0.024). They administered the complete initial dose of dantrolene (2mg/kg) more quickly (15.7 minutes [13.9-18.3] vs 22.4 minutes [18.6-25]) than the control group (P=0.017). However, anaesthesiologists deemed the usability of the checklist to be perfectible. Registered anaesthesiologists' use of the MH checklist during a simulation session widely improved their adherence to guidelines and non-technical skills. This study strongly suggests the benefit of checklist tools for emergency management. Notwithstanding, better awareness and training for anaesthesiologists could further improve the use of this tool. Copyright © 2017 Société française d'anesthésie et de réanimation (Sfar). Published by Elsevier Masson SAS. All rights reserved.

[Impact of a targeted technical assistance to improve vaccine coverage in Cameroon, Côte d'Ivoire, and Mauritania in 2014].

PubMed

Ahanhanzo, Y Glèlè; Palenfo, D; Saussier, C; Gbèdonou, P; Tonda, A; Da Silva, A; Aplogan, A

2016-08-01

Within the framework of its strategic goal of vaccine coverage (VC) improvement, GAVI, The Vaccine Alliance has entrusted the Agence de médecine préventive (agency for preventive medicine, AMP) with technical assistance services to Cameroon, Cote d'Ivoire (Ivory Coast), and Mauritania. This support was provided to selected priority districts (PDs) with the worst Penta3 coverage performances. In 2014, PDs benefited from technical and management capacities in vaccinology strengthening for district medical officers, supportive supervisions and technical assistance in health logistics, data management and quality. We analyzed the effects of the AMP technical assistance on the improvement of the cumulative Penta3 coverage, which is the key performance indicator of the expanded programme on immunization (EPI) performance. We compared Penta3 coverage between PDs and other non-priority districts (NPDs), Penta3 coverage evolution within each PD, and the distribution of PDs and NPDs according to Penta3 coverage category between January and December 2014. Technical assistance had a positive effect on the EPI performance. Indeed Penta3 coverage progression was higher in PDs than in NPDs throughout the period. Besides, between January and December 2014, the Penta3 VC increased in 70%, 100% and 86% of DPs in Cameroon, Côte d'Ivoire and Mauritania, respectively. Furthermore, the increase in the number of PDs with a Penta3 coverage over 80% was higher in DPs than in NPDs: 20% versus 8% for Cameroon, 58% versus 29% for Côte d'Ivoire and 17% versus 8% for Mauritania. Despite positive and encouraging results, this technical assistance service can be improved and efforts are needed to ensure that all health districts have a VC above 80% for all EPI vaccines. The current challenge is for African countries to mobilize resources for maintaining the knowledge and benefits and scaling such interventions in the public health area.

Do communication training programs improve students’ communication skills? - a follow-up study

PubMed Central

2012-01-01

Background Although it is taken for granted that history-taking and communication skills are learnable, this learning process should be confirmed by rigorous studies, such as randomized pre- and post-comparisons. The purpose of this paper is to analyse whether a communication course measurably improves the communicative competence of third-year medical students at a German medical school and whether technical or emotional aspects of communication changed differently. Method A sample of 32 randomly selected students performed an interview with a simulated patient before the communication course (pre-intervention) and a second interview after the course (post-intervention), using the Calgary-Cambridge Observation Guide (CCOG) to assess history taking ability. Results On average, the students improved in all of the 28 items of the CCOG. The 6 more technically-orientated communication items improved on average from 3.4 for the first interview to 2.6 in the second interview (p < 0.0001), the 6 emotional items from 2.7 to 2.3 (p = 0.023). The overall score for women improved from 3.2 to 2.5 (p = 0.0019); male students improved from 3.0 to 2.7 (n.s.). The mean interview time significantly increased from the first to the second interview, but the increase in the interview duration and the change of the overall score for the students’ communication skills were not correlated (Pearson’s r = 0.03; n.s.). Conclusions Our communication course measurably improved communication skills, especially for female students. These improvements did not depend predominantly on an extension of the interview time. Obviously, “technical” aspects of communication can be taught better than “emotional” communication skills. PMID:22947372

Education, Technical Progress, and Economic Growth: The Case of Taiwan.

ERIC Educational Resources Information Center

Lin, T.-C.

2003-01-01

Investigates the effect of education and the role of technical progress on economic growth in Taiwan from 1965-2000. Finds that education has a positive and significant effect on growth, but the role of technical progress does not appear to be extraordinarily important. Furthermore, no markedly significant relationships exist between capital and…

Advanced transportation system studies, technical area 3. Alternate propulsion subsystem concepts: J-2S restart study

NASA Astrophysics Data System (ADS)

Vilja, John; Levack, Daniel

1993-04-01

The objectives were to assess what design changes would be required to remit late production of the J-2S engine for use as a large high energy upper stage engine. The study assessed design changes required to perform per the J-2S model specification, manufacturing changes required due to obsolescence or improvements in state-of-the-practice, availability issues for supplier provided items, and provided cost and schedule estimates for this configuration. The confidence that J-2S production could be reinitiated within reasonable costs and schedules was provided. No significant technical issues were identified in either the producibility study or in the review of previous technical data. Areas of potential cost reduction were identified which could be quantified to a greater extent with further manufacturing planning. The proposed schedule can be met with no foreseeable impacts. The results of the study provided the necessary foundation for the detailed manufacturing and test plans and non-recurring and recurring cost estimates that are needed to complete the effort to reinitiate production of the J-2S engine system.

Introduction of a fresh cadaver laboratory during the surgery clerkship improves emergency technical skills.

PubMed

Nematollahi, Saman; Kaplan, Stephen J; Knapp, Christopher M; Ho, Hang; Alvarado, Jared; Viscusi, Rebecca; Adamas-Rappaport, William

2015-08-01

Student acquisition of technical skills during the clinical years of medical school has been steadily declining. To address this issue, the authors instituted a fresh cadaver-based Emergency Surgical Skills Laboratory (ESSL). Sixty-three medical students rotating through the third-year surgery clerkship participated in a 2-hour, fresh cadaver-based ESSL conducted during the first 2 days of the clerkship. The authors evaluated students utilizing both surgical skills and written examination before the ESSL and at 4 weeks post ESSL. Students demonstrated a mean improvement of 64% (±11) (P < .001) and 38% (±17) (P < .001) in technical skills and clinical knowledge, respectively. When technical skills were compared between cohorts, there were no differences observed in both pre- and post-testing (P = .08). A fresh cadaver laboratory is an effective method to provide proficiency in emergency technical skills not acquired during the clinical years of medical school. Copyright © 2015 Elsevier Inc. All rights reserved.

Progress and prospects: gene therapy for performance and appearance enhancement.

PubMed

Kiuru, M; Crystal, R G

2008-03-01

While medical therapies aim at reversing, reducing or eliminating diseases, the goal of enhancements is to improve performance or appearance beyond normal levels. Distinction between the two interventions is not always clear as they often present as a continuum. Gene therapy typically aims at treating or preventing disease, but the technology can theoretically be employed for enhancement. Some of the gene therapy enhancement strategies include improving performance by increasing muscle mass, endurance, memory, and cognition and bettering appearance by controlling weight, height and hair growth. In addition to the technical challenges of making enhancement strategies safe and effective, genetic enhancement presents significant ethical/societal questions that must be addressed.

Shoulder Dystocia: Quality, Safety, and Risk Management Considerations.

PubMed

Moni, Saila; Lee, Colleen; Goffman, Dena

2016-12-01

Shoulder dystocia is a term that evokes terror and fear among many physicians, midwives, and health care providers as they recollect at least 1 episode of shoulder dystocia in their careers. Shoulder dystocia can result in significant maternal and neonatal complications. Because shoulder dystocia is an urgent, unanticipated, and uncommon event with potentially catastrophic consequences, all practitioners and health care teams must be well-trained to manage this obstetric emergency. Preparation for shoulder dystocia in a systematic way, through standardization of process, practicing team-training and communication, along with technical skills, through simulation education and ongoing quality improvement initiatives will result in improved outcomes.

Quality Career/Technical Programs Prepare Students to Succeed in a New, More Challenging Economy

ERIC Educational Resources Information Center

Southern Regional Education Board (SREB), 2008

2008-01-01

Quality career/technical education and its role in school improvement was a primary theme of the 2008 "High Schools That Work" ("HSTW") Staff Development Conference. This newsletter covers crucial topics in quality CTE (career and technical education), including assessing the quality and effectiveness of CT programs, preparing students to succeed…

Evaluation of Factors that Contribute to Improving Academic Achievement of Career and Technical Education Students in Rhode Island

ERIC Educational Resources Information Center

Marsella, Anthony J.

2010-01-01

The primary purpose of this study was to gain a deeper understanding of career and technical education in Rhode Island utilizing Program Approval Process: Standards, Instruments, and Protocols. The process establishes standards for quality career and technical education. The population surveyed provided data on Standard Two: Curriculum and…

Significant improvement of a clinical training course in physical examination after basic structural changes in the teaching content and methods.

PubMed

Sonne, Carolin; Vogelmann, Roger; Lesevic, H; Bott-Flügel, Lorenz; Ott, I; Seyfarth, Melchior

2013-01-01

Regular student evaluations at the Technical University Munich indicate the necessity for improvement of the clinical examination course. The aim of this study was to examine if targeted measures to restructure and improve a clinical examination course session lead to a higher level of student satisfaction as well as better self-assessment of the acquired techniques of clinical examination. At three medical departments of the Technical University Munich during the 2010 summer semester, the quantitative results of 49 student evaluations (ratings 1-6, German scholastic grading system) of the clinical examination course were compared for a course before and a course after structured measures for improvement. These measures included structured teaching instructions, handouts and additional material from the Internet. 47 evaluations were completed before and 34 evaluations after the measures for improvement. The measures named above led to a significant improvement of the evaluative ratings in the following areas: short introduction to the topic of each clinical examination course (from 2.4±1.2 to1.7±1.0; p=0.0020) and to basic measures of hygiene (from 3.8±1.9 to 2.5±1.8; p=0.004), structured demonstration of each clinical examination step (from 2.9±1.5 to 1.8±1.0; p=0.001), sufficient practice of each clinical examination step (from 3.1±1.8 to 2.2±1.4; p=0.030) structured feedback on each clinical examination step (from 3.0±1.4 to 2.3±1.0; p=0.0070), use of handouts (from 5.2±1.4 to 1.8±1.4; p<0.001), advice on additional learning material (from 5.0±1.4 to 3.4±2.0; p<0.001), general learning experience (from 2.4±0.9 to 1.9±0.8; p=0.017), and self-assessment of the acquired techniques of clinical examination (from 3.5±1.3 to 2.5±1.1; p<0.01). Structured changes led to significant improvement in the evaluative ratings of a clinical examination course session concerning preparation of the tutors, structure of the course, and confidence in performing physical examinations.

Potentials for Platooning in U.S. Highway Freight Transport

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muratori, Matteo; Holden, Jacob; Lammert, Michael

2017-03-28

Smart technologies enabling connection among vehicles and between vehicles and infrastructure as well as vehicle automation to assist human operators are receiving significant attention as a means for improving road transportation systems by reducing fuel consumption - and related emissions - while also providing additional benefits through improving overall traffic safety and efficiency. For truck applications, which are currently responsible for nearly three-quarters of the total U.S. freight energy use and greenhouse gas (GHG) emissions, platooning has been identified as an early feature for connected and automated vehicles (CAVs) that could provide significant fuel savings and improved traffic safety andmore » efficiency without radical design or technology changes compared to existing vehicles. A statistical analysis was performed based on a large collection of real-world U.S. truck usage data to estimate the fraction of total miles that are technically suitable for platooning. In particular, our analysis focuses on estimating 'platoonable' mileage based on overall highway vehicle use and prolonged high-velocity traveling, and established that about 65% of the total miles driven by combination trucks from this data sample could be driven in platoon formation, leading to a 4% reduction in total truck fuel consumption. This technical potential for 'platoonable' miles in the United States provides an upper bound for scenario analysis considering fleet willingness and convenience to platoon as an estimate of overall benefits of early adoption of connected and automated vehicle technologies. A benefit analysis is proposed to assess the overall potential for energy savings and emissions mitigation by widespread implementation of highway platooning for trucks.« less

Thin EFG octagons

NASA Astrophysics Data System (ADS)

Kalejs, J. P.

1994-01-01

Mobil Solar Energy Corporation currently practices a unique crystal growth technology for producing crystalline silicon sheet, which is then cut with lasers into wafers. The wafers are processed into solar cells and incorporated into modules for photovoltaic applications. The silicon sheet is produced using a method known as Edge-defined Film-fed growth (EFG), in the form of hollow eight-sided polygons (octagons) with 10 cm faces. These are grown to lengths of 5 meters and thickness of 300 microns, with continuous melt replenishment, in compact furnaces designed to operate at a high sheet area production area of 135 sq cm/min. The present Photovoltaic Manufacturing Technology (PVMaT) three-year program seeks to advance the manufacturing line capabilities of the Mobil Solar crystal growth and cutting technologies. If successful, these advancements will provide significant reductions in already low silicon raw material usage, improve process productivity, laser cutting throughput and yield, and so lower both individual wafer cost and the cost of module production. This report summarizes the significant technical improvements in EFG technology achieved in Phase 1 of this program. Technical results are reported for each of the three main program areas: (1) thin octagon growth (crystal growth) -- to reduce the thickness of the octagon to an interim goal of 250 microns during Phase 1, with an ultimate goal of achieving 200 micron thicknesses; (2) laser cutting -- to improve the laser cutting process, so as to produce wafers with decreased laser cutting damage at increased wafer throughput rates; and (3) process control and product specification -- to implement advanced strategies in crystal growth process control and productivity designed to increase wafer yields.

Virtual reality robotic surgery warm-up improves task performance in a dry laboratory environment: a prospective randomized controlled study.

PubMed

Lendvay, Thomas S; Brand, Timothy C; White, Lee; Kowalewski, Timothy; Jonnadula, Saikiran; Mercer, Laina D; Khorsand, Derek; Andros, Justin; Hannaford, Blake; Satava, Richard M

2013-06-01

Preoperative simulation warm-up has been shown to improve performance and reduce errors in novice and experienced surgeons, yet existing studies have only investigated conventional laparoscopy. We hypothesized that a brief virtual reality (VR) robotic warm-up would enhance robotic task performance and reduce errors. In a 2-center randomized trial, 51 residents and experienced minimally invasive surgery faculty in General Surgery, Urology, and Gynecology underwent a validated robotic surgery proficiency curriculum on a VR robotic simulator and on the da Vinci surgical robot (Intuitive Surgical Inc). Once they successfully achieved performance benchmarks, surgeons were randomized to either receive a 3- to 5-minute VR simulator warm-up or read a leisure book for 10 minutes before performing similar and dissimilar (intracorporeal suturing) robotic surgery tasks. The primary outcomes compared were task time, tool path length, economy of motion, technical, and cognitive errors. Task time (-29.29 seconds, p = 0.001; 95% CI, -47.03 to -11.56), path length (-79.87 mm; p = 0.014; 95% CI, -144.48 to -15.25), and cognitive errors were reduced in the warm-up group compared with the control group for similar tasks. Global technical errors in intracorporeal suturing (0.32; p = 0.020; 95% CI, 0.06-0.59) were reduced after the dissimilar VR task. When surgeons were stratified by earlier robotic and laparoscopic clinical experience, the more experienced surgeons (n = 17) demonstrated significant improvements from warm-up in task time (-53.5 seconds; p = 0.001; 95% CI, -83.9 to -23.0) and economy of motion (0.63 mm/s; p = 0.007; 95% CI, 0.18-1.09), and improvement in these metrics was not statistically significantly appreciated in the less-experienced cohort (n = 34). We observed significant performance improvement and error reduction rates among surgeons of varying experience after VR warm-up for basic robotic surgery tasks. In addition, the VR warm-up reduced errors on a more complex task (robotic suturing), suggesting the generalizability of the warm-up. Copyright © 2013 American College of Surgeons. All rights reserved.

Virtual Reality Robotic Surgery Warm-Up Improves Task Performance in a Dry Lab Environment: A Prospective Randomized Controlled Study

PubMed Central

Lendvay, Thomas S.; Brand, Timothy C.; White, Lee; Kowalewski, Timothy; Jonnadula, Saikiran; Mercer, Laina; Khorsand, Derek; Andros, Justin; Hannaford, Blake; Satava, Richard M.

2014-01-01

Background Pre-operative simulation “warm-up” has been shown to improve performance and reduce errors in novice and experienced surgeons, yet existing studies have only investigated conventional laparoscopy. We hypothesized a brief virtual reality (VR) robotic warm-up would enhance robotic task performance and reduce errors. Study Design In a two-center randomized trial, fifty-one residents and experienced minimally invasive surgery faculty in General Surgery, Urology, and Gynecology underwent a validated robotic surgery proficiency curriculum on a VR robotic simulator and on the da Vinci surgical robot. Once successfully achieving performance benchmarks, surgeons were randomized to either receive a 3-5 minute VR simulator warm-up or read a leisure book for 10 minutes prior to performing similar and dissimilar (intracorporeal suturing) robotic surgery tasks. The primary outcomes compared were task time, tool path length, economy of motion, technical and cognitive errors. Results Task time (-29.29sec, p=0.001, 95%CI-47.03,-11.56), path length (-79.87mm, p=0.014, 95%CI -144.48,-15.25), and cognitive errors were reduced in the warm-up group compared to the control group for similar tasks. Global technical errors in intracorporeal suturing (0.32, p=0.020, 95%CI 0.06,0.59) were reduced after the dissimilar VR task. When surgeons were stratified by prior robotic and laparoscopic clinical experience, the more experienced surgeons(n=17) demonstrated significant improvements from warm-up in task time (-53.5sec, p=0.001, 95%CI -83.9,-23.0) and economy of motion (0.63mm/sec, p=0.007, 95%CI 0.18,1.09), whereas improvement in these metrics was not statistically significantly appreciated in the less experienced cohort(n=34). Conclusions We observed a significant performance improvement and error reduction rate among surgeons of varying experience after VR warm-up for basic robotic surgery tasks. In addition, the VR warm-up reduced errors on a more complex task (robotic suturing) suggesting the generalizability of the warm-up. PMID:23583618

[Engineering a bone free flap for maxillofacial reconstruction: technical restrictions].

PubMed

Raoul, G; Myon, L; Chai, F; Blanchemain, N; Ferri, J

2011-09-01

Vascularisation is a key for success in bone tissue engineering. Creating a functional vascular network is an important concern so as to ensure vitality in regenerated tissues. Many strategies were developed to achieve this goal. One of these is cellular growth technique by perfusion bioreactor chamber. These new technical requirements came along with improved media and chamber receptacles: bioreactors (chapter 2). Some bone tissue engineering processes already have clinical applications but for volumes limited by the lack of vascularisation. Resorbable or non-resorbable membranes are an example. They are used separately or in association with bone grafts and they protect the graft during the revascularization process. Potentiated osseous regeneration uses molecular or cellular adjuvants (BMPs and autologous stem cells) to improve osseous healing. Significant improvements were made: integration of specific sequences, which may guide and enhance cells differentiation in scaffold; nano- or micro-patterned cell containing scaffolds. Finally, some authors consider the patient body as an ideal bioreactor to induce vascularisation in large volumes of grafted tissues. "Endocultivation", i.e., cellular culture inside the human body was proven to be feasible and safe. The properties of regenerated bone in the long run remain to be assessed. The objective to reach remains the engineering of an "in vitro" osseous free flap without morbidity. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

Learning from Health Information Exchange Technical Architecture and Implementation in Seven Beacon Communities

PubMed Central

McCarthy, Douglas B.; Propp, Karen; Cohen, Alexander; Sabharwal, Raj; Schachter, Abigail A.; Rein, Alison L.

2014-01-01

As health care providers adopt and make “meaningful use” of health information technology (health IT), communities and delivery systems must set up the infrastructure to facilitate health information exchange (HIE) between providers and numerous other stakeholders who have a role in supporting health and care. By facilitating better communication and coordination between providers, HIE has the potential to improve clinical decision-making and continuity of care, while reducing unnecessary use of services. When implemented as part of a broader strategy for health care delivery system and payment reform, HIE capability also can enable the use of analytic tools needed for population health management, patient engagement in care, and continuous learning and improvement. The diverse experiences of seven communities that participated in the three-year federal Beacon Community Program offer practical insight into factors influencing the technical architecture of exchange infrastructure and its role in supporting improved care, reduced cost, and a healthier population. The case studies also document challenges faced by the communities, such as significant time and resources required to harmonize variations in the interpretation of data standards. Findings indicate that their progress developing community-based HIE strategies, while driven by local needs and objectives, is also influenced by broader legal, policy, and market conditions. PMID:25848591

Learning from health information exchange technical architecture and implementation in seven beacon communities.

PubMed

McCarthy, Douglas B; Propp, Karen; Cohen, Alexander; Sabharwal, Raj; Schachter, Abigail A; Rein, Alison L

2014-01-01

As health care providers adopt and make "meaningful use" of health information technology (health IT), communities and delivery systems must set up the infrastructure to facilitate health information exchange (HIE) between providers and numerous other stakeholders who have a role in supporting health and care. By facilitating better communication and coordination between providers, HIE has the potential to improve clinical decision-making and continuity of care, while reducing unnecessary use of services. When implemented as part of a broader strategy for health care delivery system and payment reform, HIE capability also can enable the use of analytic tools needed for population health management, patient engagement in care, and continuous learning and improvement. The diverse experiences of seven communities that participated in the three-year federal Beacon Community Program offer practical insight into factors influencing the technical architecture of exchange infrastructure and its role in supporting improved care, reduced cost, and a healthier population. The case studies also document challenges faced by the communities, such as significant time and resources required to harmonize variations in the interpretation of data standards. Findings indicate that their progress developing community-based HIE strategies, while driven by local needs and objectives, is also influenced by broader legal, policy, and market conditions.

Use of Documentary and Face to Face Interaction in Working Toward School Improvement. Draft. Documentation and Technical Assistance in Urban Schools.

ERIC Educational Resources Information Center

Holmes, Manford

This paper compares the usefulness of documentary (written materials) versus face to face delivery of information in helping to bring about urban school improvement. The paper is based on the experiences of the Documentation and Technical Assistance Project (DTA) of the Center for New Schools (Chicago, Illinois), a program that aims to increase…

NDE: An effective approach to improved reliability and safety. A technology survey. [nondestructive testing of aircraft structures

NASA Technical Reports Server (NTRS)

Carpenter, J. L., Jr.; Stuhrke, W. F.

1976-01-01

Technical abstracts are presented for about 100 significant documents relating to nondestructive testing of aircraft structures or related structural testing and the reliability of the more commonly used evaluation methods. Particular attention is directed toward acoustic emission; liquid penetrant; magnetic particle; ultrasonics; eddy current; and radiography. The introduction of the report includes an overview of the state-of-the-art represented in the documents that have been abstracted.

Clinical results of sacral neuromodulation for chronic voiding dysfunction using unilateral sacral foramen electrodes.

PubMed

Weil, E H; Ruiz-Cerdá, J L; Eerdmans, P H; Janknegt, R A; Van Kerrebroeck, P E

1998-01-01

The aim of this study was to determine the long-term clinical efficacy and complications of neuromodulation with a unilateral sacral foramen electrode in 36 patients with chronic voiding dysfunction. Following a positive effect of a percutaneous nerve evaluation test, patients underwent open surgery. A permanent electrode was implanted in 24 patients with urge incontinence, in 6 with urgency-frequency syndrome, and in 6 with nonobstructive urinary retention. After an average follow-up period of 37.8 months, 19 patients (52.8%) continue to benefit from the neuromodulation with a significant improvement of symptoms and urodynamic parameters. The median duration of the therapeutic effect for the total study population was longer than 60 months. No significant difference in the median duration of therapeutic effect with regard to sex, the type of voiding disorder, or the implant pulse generator was found. However, in patients with previous psychological disorders the median duration of therapeutic effect was only 12 months (P = 0.008). Complications were mild. In the group of patients in whom the therapeutic effect remains, 37 reoperations have had to be performed. We conclude that although reoperations were needed to overcome technical problems, patients can achieve lasting symptomatic improvement. Since technical changes in the equipment have reduced the number of complications, even better results can be expected in terms of the reoperation rate.

Comparison of technique errors of intraoral radiographs taken on film v photostimulable phosphor (PSP) plates.

PubMed

Zhang, Wenjian; Huynh, Carolyn P; Abramovitch, Kenneth; Leon, Inga-Lill K; Arvizu, Liliana

2012-06-01

The objective of this study was to compare the technical errors of intraoral radiographs exposed on film v photostimulable phosphor (PSP) plates. The intraoral radiographic images exposed on phantoms from preclinical practical exams of dental and dental hygiene students were used. Each exam consisted of 10 designated periapical and bitewing views. A total of 107 film sets and 122 PSP sets were evaluated for technique errors, including placement, elongation, foreshortening, overlapping, cone cut, receptor bending, density, mounting, dot in apical area, and others. Some errors were further subcategorized as minor, major, or remake depending on the severity. The percentages of radiographs with various errors were compared between film and PSP by the Fisher's Exact Test. Compared with film, there was significantly less PSP foreshortening, elongation, and bending errors, but significantly more placement and overlapping errors. Using a wrong sized receptor due to the similarity of the color of the package sleeves is a unique PSP error. Optimum image quality is attainable with PSP plates as well as film. When switching from film to a PSP digital environment, more emphasis is necessary for placing the PSP plates, especially those with excessive packet edge, and then correcting the corresponding angulation for the beam alignment. Better design for improving intraoral visibility and easy identification of different sized PSP will improve the clinician's technical performance with this receptor.

Effects of resident duty hour reform on surgical and procedural patient safety indicators among hospitalized Veterans Health Administration and Medicare patients.

PubMed

Rosen, Amy K; Loveland, Susan A; Romano, Patrick S; Itani, Kamal M F; Silber, Jeffrey H; Even-Shoshan, Orit O; Halenar, Michael J; Teng, Yun; Zhu, Jingsan; Volpp, Kevin G

2009-07-01

Improving patient safety was a strong motivation behind duty hour regulations implemented by Accreditation Council for Graduate Medical Education on July 1, 2003. We investigated whether rates of patient safety indicators (PSIs) changed after these reforms. Observational study of patients admitted to Veterans Health Administration (VA) (N = 826,047) and Medicare (N = 13,367,273) acute-care hospitals from July 1, 2000 to June 30, 2005. We examined changes in patient safety events in more versus less teaching-intensive hospitals before (2000-2003) and after (2003-2005) duty hour reform, using conditional logistic regression, adjusting for patient age, gender, comorbidities, secular trends, baseline severity, and hospital site. Ten PSIs were aggregated into 3 composite measures based on factor analyses: "Continuity of Care," "Technical Care," and "Other" composites. Continuity of Care composite rates showed no significant changes postreform in hospitals of different teaching intensity in either VA or Medicare. In the VA, there were no significant changes postreform for the technical care composite. In Medicare, the odds of a Technical Care PSI event in more versus less teaching-intensive hospitals in postreform year 1 were 1.12 (95% CI; 1.01-1.25); there were no significant relative changes in postreform year 2. Other composite rates increased in VA in postreform year 2 in more versus less teaching-intensive hospitals (odds ratio, 1.63; 95% CI; 1.10-2.41), but not in Medicare in either postreform year. Duty hour reform had no systematic impact on PSI rates. In the few cases where there were statistically significant increases in the relative odds of developing a PSI, the magnitude of the absolute increases were too small to be clinically meaningful.

Carotid Artery Stenting

PubMed Central

2018-01-01

Carotid artery stenosis is relatively common and is a significant cause of ischemic stroke, but carotid revascularization can reduce the risk of ischemic stroke in patients with significant symptomatic stenosis. Carotid endarterectomy has been and remains the gold standard treatment to reduce the risk of carotid artery stenosis. Carotid artery stenting (CAS) (or carotid artery stent implantation) is another method of carotid revascularization, which has developed rapidly over the last 30 years. To date, the frequency of use of CAS is increasing, and clinical outcomes are improving with technical advancements. However, the value of CAS remains unclear in patients with significant carotid artery stenosis. This review article discusses the basic concepts and procedural techniques involved in CAS. PMID:29171201

Masters Thesis- Criticality Alarm System Design Guide with Accompanying Alarm System Development for the Radioisotope Production Laboratory in Richland, Washington

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenfield, Bryce A.

2009-12-01

A detailed instructional manual was created to guide criticality safety engineers through the process of designing a criticality alarm system (CAS) for Department of Energy (DOE) hazard class 1 and 2 facilities. Regulatory and technical requirements were both addressed. A list of design tasks and technical subtasks are thoroughly analyzed to provide concise direction for how to complete the analysis. An example of the application of the design methodology, the Criticality Alarm System developed for the Radioisotope Production Laboratory (RPL) of Richland, Washington is also included. The analysis for RPL utilizes the Monte Carlo code MCNP5 for establishing detector coveragemore » in the facility. Significant improvements to the existing CAS were made that increase the reliability, transparency, and coverage of the system.« less

DebugIT for patient safety - improving the treatment with antibiotics through multimedia data mining of heterogeneous clinical data.

PubMed

Lovis, Christian; Colaert, Dirk; Stroetmann, Veli N

2008-01-01

The concepts and architecture underlying a large-scale integrating project funded within the 7th EU Framework Programme (FP7) are discussed. The main objective of the project is to build a tool that will have a significant impact for the monitoring and the control of infectious diseases and antimicrobial resistances in Europe; This will be realized by building a technical and semantic infrastructure able to share heterogeneous clinical data sets from different hospitals in different countries, with different languages and legislations; to analyze large amounts of this clinical data with advanced multimedia data mining and finally apply the obtained knowledge for clinical decisions and outcome monitoring. There are numerous challenges in this project at all levels, technical, semantical, legal and ethical that will have to be addressed.

[Minimally invasive surgery and robotic surgery: surgery 4.0?].

PubMed

Feußner, H; Wilhelm, D

2016-03-01

Surgery can only maintain its role in a highly competitive environment if results are continuously improved, accompanied by further reduction of the interventional trauma for patients and with justifiable costs. Significant impulse to achieve this goal was expected from minimally invasive surgery and, in particular, robotic surgery; however, a real breakthrough has not yet been achieved. Accordingly, the new strategic approach of cognitive surgery is required to optimize the provision of surgical treatment. A full scale integration of all modules utilized in the operating room (OR) into a comprehensive network and the development of systems with technical cognition are needed to upgrade the current technical environment passively controlled by the surgeon into an active collaborative support system (surgery 4.0). Only then can the true potential of minimally invasive surgery and robotic surgery be exploited.

Enzymatic mitigation of 5-O-chlorogenic acid for an improved digestibility of coffee.

PubMed

Siebert, Mareike; Berger, Ralf G; Nieter, Annabel

2018-08-30

A p-coumaroyl esterase from Rhizoctonia solani was used to decrease 5-O-chlorogenic acid (5-CQA) content in coffee powder. HPLC-UV showed a decline of up to 98% of 5-CQA after the enzyme treatment. Effects on aroma were determined by means of aroma extract dilution analysis. Flavour dilution factors of treated and control extract differed in four volatile compounds only. Effect on aroma and taste was evaluated by sensory tests. No significant differences were perceived, and no off-flavour nor off-taste was noted. As chlorogenic acids are suspected to cause stomach irritating effects in sensitive people, the enzyme treatment offers a technically feasible approach to improve the quality of coffee beverages by reducing 5-CQA concentration without significantly affecting the aroma and taste profile. Copyright © 2018 Elsevier Ltd. All rights reserved.

Process Evaluation of a Quality Improvement Project to Decrease Hospital Readmissions From Skilled Nursing Facilities.

PubMed

Meehan, Thomas P; Qazi, Daniel J; Van Hoof, Thomas J; Ho, Shih-Yieh; Eckenrode, Sheila; Spenard, Ann; Pandolfi, Michelle; Johnson, Florence; Quetti, Deborah

2015-08-01

To describe and evaluate the impact of quality improvement (QI) support provided to skilled nursing facilities (SNFs) by a Quality Improvement Organization (QIO). Retrospective, mixed-method, process evaluation of a QI project intended to decrease preventable hospital readmissions from SNFs. Five SNFs in Connecticut. SNF Administrators, Directors of Nursing, Assistant Directors of Nursing, Admissions Coordinators, Registered Nurses, Certified Nursing Assistants, Receptionists, QIO Quality Improvement Consultant. QIO staff provided training and technical assistance to SNF administrative and clinical staff to establish or enhance QI infrastructure and implement an established set of QI tools [Interventions to Reduce Acute Care Transfers (INTERACT) tools]. Baseline SNF demographic, staffing, and hospital readmission data; baseline and follow-up SNF QI structure (QI Committee), processes (general and use of INTERACT tools), and outcome (30-day all-cause hospital readmission rates); details of QIO-provided training and technical assistance; QIO-perceived barriers to quality improvement; SNF leadership-perceived barriers, accomplishments, and suggestions for improvement of QIO support. Success occurred in establishing QI Committees and targeting preventable hospital readmissions, as well as implementing INTERACT tools in all SNFs; however, hospital readmission rates decreased in only 2 facilities. QIO staff and SNF leaders noted the ongoing challenge of engaging already busy SNF staff and leadership in QI activities. SNF leaders reported that they appreciated the training and technical assistance that their institutions received, although most noted that additional support was needed to bring about improvement in readmission rates. This process evaluation documented mixed clinical results but successfully identified opportunities to improve recruitment of and provision of technical support to participating SNFs. Recommendations are offered for others who wish to conduct similar projects. Copyright © 2015 AMDA – The Society for Post-Acute and Long-Term Care Medicine. All rights reserved.

Gender difference in preference of specialty as a career choice among Japanese medical students.

PubMed

Kawamoto, Ryuichi; Ninomiya, Daisuke; Kasai, Yoshihisa; Kusunoki, Tomo; Ohtsuka, Nobuyuki; Kumagi, Teru; Abe, Masanori

2016-11-10

In Japan, the absolute deficiency of doctors and maldistribution of doctors by specialty is a significant problem in the Japanese health care system. The purpose of this study was to investigate the factors contributing to specialty preference in career choice among Japanese medical students. A total of 368 medical students completed the survey giving an 88.2 % response rate. The subjects comprised 141 women aged 21 ± 3 (range, 18-34) years and 227 men aged 22 ± 4 (range, 18-44) years. Binary Logistic regression analysis was performed using specialty preferences as the criterion variable and the factors in brackets as six motivational variables (e.g., Factor 1: educational experience; Factor 2: job security; Factor 3: advice from others; Factor 4: work-life balance; Factor 5: technical and research specialty; and Factor 6: personal reasons). Women significantly preferred pediatrics, obstetrics & gynecology, and psychology than the men. Men significantly preferred surgery and orthopedics than the women. For both genders, a high odds ratio (OR) of "technical & research specialty" and a low OR for "personal reasons" were associated with preference for surgery. "Technical & research specialty" was positively associated with preference for special internal medicine and negatively for pediatrics. "Work-life balance" was positively associated with preference for psychology and negatively for emergency medicine. Among the women only, "technical & research specialty" was negatively associated with preference for general medicine/family medicine and obstetrics & gynecology, and "job security" was positively associated for general medicine/family medicine and negatively for psychology. Among men only, "educational experience" and "personal reasons" were positively, and "job security" was negatively associated with preference for pediatrics. For both genders, "work-life balance" was positively associated with preference for controllable lifestyle specialties. We must acknowledge that Japanese medical students have dichotomized some motivations for their specialty preference based on gender. Systematic improvements in the working environment are necessary to solve these issues.

Rotorcraft System Identification (Identification des Systemes de Voilures Tournantes)

DTIC Science & Technology

1991-10-01

the NATO community; - Providing scientific and technical advice and assistance to the Military Committee in the field of aerospace research and...common defence posture, - Improving the co-operation among member nations in aerospace research and development. - Exchange of scientific and...technical information; - Prcviding assistance to member nations for the purpose of increasing their scientific and technical potential, - Rendenng scientific

Technical Highlight: NREL Improves Building Energy Simulation Programs Through Diagnostic Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polly, B.

2012-01-09

This technical highlight describes NREL research to develop Building Energy Simulation Test for Existing Homes (BESTEST-EX) to increase the quality and accuracy of energy analysis tools for the building retrofit market.

Hemodiafiltration: Technical and Clinical Issues.

PubMed

Ronco, Claudio

2015-01-01

Hemodiafiltration (HDF) seems to represent the gold standard in the field of replacement of renal function by dialysis. High convective fluxes have been correlated with better clinical outcomes. Sometimes, however, there are technical barriers to the achievement of high blood flows adequate to perform effective convective therapies. In spite of optimized procedures, the progressive increase in transmembrane pressure (TMP), the blood viscosity due to hemoconcentration and blood path resistance sometimes becomes inevitable. We propose two possible solutions that can be operated automatically via specific software in the dialysis machine: predilution on demand and backflush on demand. Predilution on demand consists in an automatic feedback of the machine, diverting part of the filtered dialysate into a predilution mode with an infusion of 200 ml in 30 s while the ultrafiltration pump stops. This produces a sudden hemodilution with a return of the parameters to acceptable values. The performance of the filter improves, and the pressure alterations are mitigated. Backflush on demand consists in an automatic feedback of the machine triggered by the TMP control, producing a positive pressure in the dialysate compartment due to a stop of filtration and rapid infusion of at least 100 ml of ultrapure dialysate into the hollow fiber. This not only produces a significant hemodilution, but also backflushes the membrane pores detaching protein layers and improving membrane permeability. These are two examples of how technology will permit to overcome technical barriers to a widespread diffusion of HDF and adequate convective dose delivery. © 2015 S. Karger AG, Basel.

Final Technical Progress Report: Development of Low-Cost Suspension Heliostat; December 7, 2011 - December 6, 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bender, W.

2013-01-01

Final technical progress report of SunShot Incubator Solaflect Energy. The project succeeded in demonstrating that the Solaflect Suspension Heliostat design is viable for large-scale CSP installations. Canting accuracy is acceptable and is continually improving as Solaflect improves its understanding of this design. Cost reduction initiatives were successful, and there are still many opportunities for further development and further cost reduction.

Improving a health information system for real-time data entries: An action research project using socio-technical systems theory.

PubMed

Adaba, Godfried Bakiyem; Kebebew, Yohannes

2018-03-01

This paper presents the findings of an action research (AR) project to improve a health information system (HIS) at the Operating Theater Department (OTD) of a National Health Service (NHS) hospital in South East England, the UK. Informed by socio-technical systems (STS) theory, AR was used to design an intervention to enhance an existing patient administration system (PAS) to enable data entries in real time while contributing to the literature. The study analyzed qualitative data collected through interviews, participant observations, and document reviews. The study found that the design of the PAS was unsuitable to the work of the three units of the OTD. Based on the diagnoses and STS theory, the project developed and implemented a successful intervention to enhance the legacy system for data entries in real time. The study demonstrates the value of AR from a socio-technical perspective for improving existing systems in healthcare settings. The steps adopted in this study could be applied to improve similar systems. A follow-up study will be essential to assess the sustainability of the improved system.

Effect of polacrilin potassium as disintegrant on bioavailability of diclofenac potassium in tablets : a technical note.

PubMed

Bele, Mrudula H; Derle, Diliprao V

2012-09-01

Polacrilin potassium is an ion exchange resin used in oral pharmaceutical formulations as a tablet disintegrant. It is a weakly acidic cation exchange resin. Chemically, it is a partial potassium salt of a copolymer of methacrylic acid with divinyl benzene. It ionizes to an anionic polymer chain and potassium cations. It was hypothesized that polacrilin potassium may be able to improve the permeability of anionic drugs according to the Donnan membrane phenomenon. The effect of polacrilin potassium on the permeability of diclofenac potassium, used as a model anionic drug, was tested in vitro using diffusion cells and in vivo by monitoring serum levels in rats. The amount of drug permeated across a dialysis membrane in vitro was significantly more in the presence of polacrilin potassium. Significant improvement was found in the extent of drug absorption in vivo. It could be concluded that polacrilin potassium may be used as a high-functionality excipient for improving the bioavailability of anionic drugs having poor gastrointestinal permeability.

The Status of Contemporary Image-Guided Modalities in Oncologic Surgery

PubMed Central

Rosenthal, Eben L; Warram, Jason M; Bland, Kirby I; Zinn, Kurt R

2014-01-01

Surgical resection remains the cornerstone of therapy for patients with early stage solid malignancies and more than half of all cancer patients undergo surgery each year. The technical ability of the surgeon to obtain clear surgical margins at the initial resection remains crucial to improve overall survival and long-term morbidity. Current resection techniques are largely based on subjective and subtle changes associated with tissue distortion by invasive cancer. As a result, positive surgical margins occur in a significant portion of tumor resections, which is directly correlated with a poor outcome. A variety of cancer imaging techniques have been adapted or developed for intraoperative surgical guidance that have been shown to improve functional and oncologic outcomes in randomized clinical trials. There are also a large number of novel, cancer-specific contrast agents that are in early stage clinical trials and preclinical development that demonstrate significant promise to improve real-time detection of subclinical cancer in the operative setting. PMID:25599326

Service providers' experiences of using a telehealth network 12 months after digitisation of a large Australian rural mental health service.

PubMed

Newman, Lareen; Bidargaddi, Niranjan; Schrader, Geoffrey

2016-10-01

Despite evidence of benefits of telehealth networks in increasing access to, or providing, previously unavailable mental health services, care providers still prefer traditional approaches. For psychiatric assessment, digital technology can offer improvements over analog systems for the technical and, subsequently, the social quality of provider-client interaction. This is in turn expected to support greater provider uptake and enhanced patient benefits. Within the framework of Innovation Diffusion Theory, to study service providers' experiences of an existing regional telehealth network for mental health care practice twelve months after digitisation in order to identify the benefits of digital telehealth over an analog system for mental health care purposes in rural Australia. Qualitative interviews and focus groups were conducted with over 40 service providers from June to September 2013 in South Australia, ranging from the metropolitan central operations to health providers located up to 600km away in rural and remote areas of the same state. Participants included rural mental health teams, directors of nursing at rural hospitals, metropolitan-based psychiatrists and registrars, the metropolitan-based mental health team dedicated to rural provider support, rural GPs, administrative staff, and the executive group of the state rural health department. Fieldwork was conducted 12 months after the analog system was digitised. The interview and focus group data were analysed using thematic analysis, focusing on three key areas of innovation diffusion theory: relative advantage, technical complexity and technical compatibility. Five themes with 11 sub-themes were identified: (1) "Existing Uses", with three sub-themes: current mental health use, use by GPs, and use for staff support; (2) "Relative Advantage", with four sub-themes: improved technical quality, improved clinical practice, time and cost benefits for providers, and improved patient care; (3) "Technical Complexity"; (4) "Technical Compatibility" with two sub-themes: technical-clinical and technical-administrative; and (5) "Broader Organisational Culture", with two sub-themes: organizational policy support and 'digital telehealth' culture. The digitised telehealth network was generally well received by providers and adopted into clinical practice. Compared with the previous analog system, staff found advantages in better visual and audio quality, more technical stability with less "drop-out", less time delay to conversations and less confusion for clients. Despite these advantages, providers identified a range of challenges to starting or continuing use and they recommended improvements to increase uptake among mental health service providers and other providers (including GPs), and to clinical uses other than mental health. To further increase uptake and impact of telehealth-mediated mental health care in rural and remote areas, even with a high quality digital system, future research must design innovative care models, consider time and cost incentives for providers to use telehealth, and must focus not only on technical training but also how to best integrate technology with clinical practice and must develop an organization-wide digital telehealth culture. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The Influence of Security Statement, Technical Protection, and Privacy on Satisfaction and Loyalty; A Structural Equation Modeling

NASA Astrophysics Data System (ADS)

Peikari, Hamid Reza

Customer satisfaction and loyalty have been cited as the e-commerce critical success factors and various studies have been conducted to find the antecedent determinants of these concepts in the online transactions. One of the variables suggested by some studies is perceived security. However, these studies have referred to security from a broad general perspective and no attempts have been made to study the specific security related variables. This paper intends to study the influence on security statement and technical protection on satisfaction, loyalty and privacy. The data was collected from 337 respondents and after the reliability and validity tests, path analysis was applied to examine the hypotheses. The results suggest that loyalty is influenced by satisfaction and security statement and no empirical support was found for the influence on technical protection and privacy on loyalty. Moreover, it was found that security statement and technical protection have a positive significant influence on satisfaction while no significant effect was found for privacy. Furthermore, the analysis indicated that security statement have a positive significant influence on technical protection while technical protection was found to have a significant negative impact on perceived privacy.

Seven Key Principles of Program and Project Success: A Best Practices Survey

NASA Technical Reports Server (NTRS)

Bilardo, Vincent J.; Korte, John J.; Dankhoff, Walter; Langan, Kevin; Branscome, Darrell R.; Fragola, Joseph R.; Dugal, Dale J.; Gormley, Thomas J.; Hammond, Walter E.; Hollopeter, James J.;

Design mentoring tool : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves seni...

Lessons Learned and Technical Standards: A Logical Marriage

NASA Technical Reports Server (NTRS)

Gill, Paul; Vaughan, William W.; Garcia, Danny; Gill, Maninderpal S. (Technical Monitor)

2001-01-01

A comprehensive database of lessons learned that corresponds with relevant technical standards would be a boon to technical personnel and standards developers. The authors discuss the emergence of one such database within NASA, and show how and why the incorporation of lessons learned into technical standards databases can be an indispensable tool for government and industry. Passed down from parent to child, teacher to pupil, and from senior to junior employees, lessons learned have been the basis for our accomplishments throughout the ages. Government and industry, too, have long recognized the need to systematically document And utilize the knowledge gained from past experiences in order to avoid the repetition of failures and mishaps. The use of lessons learned is a principle component of any organizational culture committed to continuous improvement. They have formed the foundation for discoveries, inventions, improvements, textbooks, and technical standards. Technical standards are a very logical way to communicate these lessons. Using the time-honored tradition of passing on lessons learned while utilizing the newest in information technology, the National Aeronautics and Space Administration (NASA) has launched an intensive effort to link lessons learned with specific technical standards through various Internet databases. This article will discuss the importance of lessons learned to engineers, the difficulty in finding relevant lessons learned while engaged in an engineering project, and the new NASA project that can help alleviate this difficulty. The article will conclude with recommendations for more expanded cross-sectoral uses of lessons learned with reference to technical standards.

Effects of Short-Interval and Long-Interval Swimming Protocols on Performance, Aerobic Adaptations, and Technical Parameters: A Training Study.

PubMed

Dalamitros, Athanasios A; Zafeiridis, Andreas S; Toubekis, Argyris G; Tsalis, George A; Pelarigo, Jailton G; Manou, Vasiliki; Kellis, Spiridon

2016-10-01

Dalamitros, AA, Zafeiridis, AS, Toubekis, AG, Tsalis, GA, Pelarigo, JG, Manou, V, and Kellis, S. Effects of short-interval and long-interval swimming protocols on performance, aerobic adaptations, and technical parameters: A training study. J Strength Cond Res 30(10): 2871-2879, 2016-This study compared 2-interval swimming training programs of different work interval durations, matched for total distance and exercise intensity, on swimming performance, aerobic adaptations, and technical parameters. Twenty-four former swimmers were equally divided to short-interval training group (INT50, 12-16 × 50 m with 15 seconds rest), long-interval training group (INT100, 6-8 × 100 m with 30 seconds rest), and a control group (CON). The 2 experimental groups followed the specified swimming training program for 8 weeks. Before and after training, swimming performance, technical parameters, and indices of aerobic adaptations were assessed. ΙΝΤ50 and ΙΝΤ100 improved swimming performance in 100 and 400-m tests and the maximal aerobic speed (p ≤ 0.05); the performance in the 50-m swim did not change. Posttraining V[Combining Dot Above]O2max values were higher compared with pretraining values in both training groups (p ≤ 0.05), whereas peak aerobic power output increased only in INT100 (p ≤ 0.05). The 1-minute heart rate and blood lactate recovery values decreased after training in both groups (p < 0.01). Stroke length increased in 100 and 400-m swimming tests after training in both groups (p ≤ 0.05); no changes were observed in stroke rate after training. Comparisons between groups on posttraining mean values, after adjusting for pretraining values, revealed no significant differences between ΙΝΤ50 and ΙΝΤ100 for all variables; however, all measures were improved vs. the respective values in the CON (p < 0.001-0.05). In conclusion, when matched for distance and exercise intensity, the short-interval (50 m) and long-interval (100 m) protocols confer analogous improvements in swimming performance, in stroke cycle parameters, and in indices of aerobic adaptations after 8 weeks of training.

Why and How to Advance Technical Copywriting.

ERIC Educational Resources Information Center

Henson, Leigh

1996-01-01

States that promotional writing for industrial/high-tech products, or technical copywriting, is gaining more attention in technical communication, although it is neglected in higher education. Testifies to the significance of technical copywriting. Suggests that dialogical audience analysis and an emphasis on rational appeal will contribute to…

Diffusion-weighted Breast MRI: Clinical Applications and Emerging Techniques

PubMed Central

Partridge, Savannah C.; Nissan, Noam; Rahbar, Habib; Kitsch, Averi E.; Sigmund, Eric E.

2016-01-01

Diffusion weighted MRI (DWI) holds potential to improve the detection and biological characterization of breast cancer. DWI is increasingly being incorporated into breast MRI protocols to address some of the shortcomings of routine clinical breast MRI. Potential benefits include improved differentiation of benign and malignant breast lesions, assessment and prediction of therapeutic efficacy, and non-contrast detection of breast cancer. The breast presents a unique imaging environment with significant physiologic and inter-subject variations, as well as specific challenges to achieving reliable high quality diffusion weighted MR images. Technical innovations are helping to overcome many of the image quality issues that have limited widespread use of DWI for breast imaging. Advanced modeling approaches to further characterize tissue perfusion, complexity, and glandular organization may expand knowledge and yield improved diagnostic tools. PMID:27690173

Features of electric drive sucker rod pumps for oil production

NASA Astrophysics Data System (ADS)

Gizatullin, F. A.; Khakimyanov, M. I.; Khusainov, F. F.

2018-01-01

This article is about modes of operation of electric drives of downhole sucker rod pumps. Downhole oil production processes are very energy intensive. Oil fields contain many oil wells; many of them operate in inefficient modes with significant additional losses. Authors propose technical solutions to improve energy performance of a pump unit drives: counterweight balancing, reducing of electric motor power, replacing induction motors with permanent magnet motors, replacing balancer drives with chain drives, using of variable frequency drives.

Glossary of testing terminology for rechargeable batteries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, P.C.

1988-10-01

The Battery Test Working Task Force was formed in 1983 for the purpose of coordinating the evaluation of development rechargeable batteries by DOE-funded labs. The Task Force developed this glossary of testing terminology to improve the accuracy of communication and to permit meaningful comparisons of test results. It consists of a section of technical terms and a separate section of programmatic phrases and acronyms. The glossary emphasizes terms related to electric vehicle batteries due to the significant development and testing activities in this area. 8 refs.

Current Issues in Orbital Debris

NASA Technical Reports Server (NTRS)

Johnson, Nicholas L.

2011-01-01

During the past two decades, great strides have been made in the international community regarding orbital debris mitigation. The majority of space-faring nations have reached a consensus on an initial set of orbital debris mitigation measures. Implementation of and compliance with the IADC and UN space debris mitigation guidelines should remain a high priority. Improvements of the IADC and UN space debris mitigation guidelines should continue as technical consensus permits. The remediation of the near-Earth space environment will require a significant and long-term undertaking.

Research of the self-healing technologies in the optical communication network of distribution automation

NASA Astrophysics Data System (ADS)

Wang, Hao; Zhong, Guoxin

2018-03-01

Optical communication network is the mainstream technique of the communication networks for distribution automation, and self-healing technologies can improve the in reliability of the optical communication networks significantly. This paper discussed the technical characteristics and application scenarios of several network self-healing technologies in the access layer, the backbone layer and the core layer of the optical communication networks for distribution automation. On the base of the contrastive analysis, this paper gives an application suggestion of these self-healing technologies.

Examining Educators' and Employers' Perceptions on Career and Technical Education Graduates' Employability Skills for the Labor Market in Jordan

ERIC Educational Resources Information Center

Al-Alawneh, Muhammad Khaled

2009-01-01

Preparing skilled and knowledgeable workforce that fits the labor market requires continued collaboration between education and work. Studying educators' and employers' perspectives on technical and non-technical skills may result in improving the quality of the graduates to compete on the level of the local as well as the global labor market.…

An Evaluation of the Science Education Component of the Cross River State Science and Technical Education Project

ERIC Educational Resources Information Center

Ekuri, Emmanuel Etta

2012-01-01

The Cross River State Science and Technical Education Project was introduced in 1992 by edict number 9 of 20 December 1991, "Cross River State Science and Technical Education Board Edit, 20 December, 1991", with the aim of improving the quality of science teaching and learning in the state. As the success of the project depends…

The Challenge of the Future. Future Trends in Adult and Continuing Technical and Vocational Education. An International Symposium (Berlin, Germany, October 16-20, 1995).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Hamburg (Germany). Inst. for Education.

This report on an international symposium on the strengthening of the development and improvement of vocational education begins with a description of UNEVOC, the International Project on Technical and Vocational Education. Section 2 presents discussions of the following topics: adult and continuing technical and vocational education and its…

Improving Secondary Career and Technical Education through Professional Development: Alternative Certification and Use of Technical Assessment Data

ERIC Educational Resources Information Center

National Research Center for Career and Technical Education, 2011

2011-01-01

Secondary career and technical education (CTE) is a field in transition. It is moving from a primary focus on preparing students for entry-level employment to preparing them for continuing education and training as well as employment. The rapid pace of change in technology and the global economy has created a demand for workers who are able to…

Inventory of greenhouse gas emissions from on-road vehicles in Midwestern USA States and integrated approach to achieving environmental sustainability in transportation : USDOT Region V Regional University Transportation Center final report : technical su

DOT National Transportation Integrated Search

2016-12-29

Two project objectives one technical and one educational- were laid out in this project. The technical objective was to assess current inventory of greenhouse gases (GHG) in the six Midwestern states of the nation and to estimate improvements as ...

U.S. Air Force Enlisted Accessions: Upgrading the Pipeline

DTIC Science & Technology

2010-02-17

of State Boards of Education (NASBE) and the Association for Career and Technical Education (ACTE). Specific collaboration efforts include improving...Accessions Command and the Association for Career and Technical Education . November 20, 2009. http://dev.armyedspace.com/news-updates/news...Understanding Between the U.S. Army Accessions Command and the Association for Career and Technical Education . November 20, 2009. http://dev.armyedspace.com

Edwin I. Hatch nuclear plant implementation of improved technical specifications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mahler, S.R.; Pendry, D.

1994-12-31

Edwin I. Hatch nuclear plant consists of two General Electric boiling water reactor/4 units, with a common control room and a common refueling floor. In March 1993, Hatch began conversion of both units` technical specifications utilizing NUREG 1433. The technical specifications amendment request was submitted February 25, 1994. Issuance is scheduled for October 21, 1994, with implementation on March 15, 1994. The current unit-1 technical specifications are in the {open_quotes}custom{close_quotes} format, and the unit-2 technical specifications are in the old standard format. Hatch previously relocated the fire protection and radiological technical specifications requirements. The Hatch conversion will provide consistency betweenmore » the two units, to the extent practicable.« less

Exploring Socio-Technical Insights for Safe Nursing Handover.

PubMed

Wong, Ming Chao; Yee, Kwang Chien; Turner, Paul

2017-01-01

Current efforts to improve nursing handover frequently use prescriptive approaches based on research evidence of handover issues within a single nursing ward or nursing specialty. Despite reported handover improvement, few studies adequately consider the transferability of results to other nursing handover environments or acknowledge the unique attributes that supported sustained improvement. With the increasing diffusion of electronic tools it has become even more critical to ensure that socio-technical issues that may impact on the quality and safety of nursing handovers are identified. This paper describes a qualitative research project that examined nursing handover in three different wards - General Medicine, General Surgery and Department of Emergency Medicine in a tertiary teaching hospital. Through conduct of a detailed analysis of nursing handover processes, this paper highlights the similarities and differences in the handover among the three different wards and presents five key socio-technical insights to support safe nursing handover.

[Technical background of data collection for parametric observation of total mesorectal excision (TME) in rectal cancer].

PubMed

Bláha, M; Hoch, J; Ferko, A; Ryška, A; Hovorková, E

Improvement in any human activity is preconditioned by inspection of results and providing feedback used for modification of the processes applied. Comparison of experts experience in the given field is another indispensable part leading to optimisation and improvement of processes, and optimally to implementation of standards. For the purpose of objective comparison and assessment of the processes, it is always necessary to describe the processes in a parametric way, to obtain representative data, to assess the achieved results, and to provide unquestionable and data-driven feedback based on such analysis. This may lead to a consensus on the definition of standards in the given area of health care. Total mesorectal excision (TME) is a standard procedure of rectal cancer (C20) surgical treatment. However, the quality of performed procedures varies in different health care facilities, which is given, among others, by internal processes and surgeons experience. Assessment of surgical treatment results is therefore of key importance. A pathologist who assesses the resected tissue can provide valuable feedback in this respect. An information system for the parametric assessment of TME performance is described in our article, including technical background in the form of a multicentre clinical registry and the structure of observed parameters. We consider the proposed system of TME parametric assessment as significant for improvement of TME performance, aimed at reducing local recurrences and at improving the overall prognosis of patients. rectal cancer total mesorectal excision parametric data clinical registries TME registry.

Developing Human Resources for the Technical Workforce: A Comparative Study of Korea and Thailand

ERIC Educational Resources Information Center

Hawley, Joshua D.; Paek, Jeeyon

2005-01-01

Asian countries face significant and growing shortages of technically skilled workers. Vocational-technical systems are key components of national human resource development. Using labor market data from Thailand and Korea, this paper analyzes the economic payoff for individual investment in vocational-technical education, and subsequent…

Gigabit Ethernet: A Technical Assessment.

ERIC Educational Resources Information Center

Axner, David

1997-01-01

Describes gigabit ethernet for LAN (local area network) technology that will expand ethernet bandwidth. Technical details are discussed, including protocol stacks, optical fiber, deployment strategy for performance improvement, ATM (Asynchronous Transfer Mode), real-time protocol, reserve reservation protocol, and standards. (LRW)

Prototype design for a predictive model to improve evacuation operations : technical report.

DOT National Transportation Integrated Search

2011-08-01

Mass evacuations of the Texas Gulf Coast remain a difficult challenge. These events are massive in scale, : highly complex, and entail an intricate, ever-changing conglomeration of technical and jurisdictional issues. : This project focused primarily...

EPA Partners with Maine DEP to Provide Technical Assistance Support, Improve Environmental and Public Health in Maine

EPA Pesticide Factsheets

The US Environmental Protection Agency (EPA) Region 1 is collaborating with the Maine Department of Environmental Protection (ME DEP) to provide free technical assistance for municipalities and businesses in Maine.

Vehicle Integrated Performance Analysis, the VIPA Experience: Reconnecting with Technical Integration

NASA Technical Reports Server (NTRS)

McGhee, David S.

2005-01-01

Today's NASA is facing significant challenges and changes. The Exploration initiative indicates a large increase in projects with limited increase in budget. The Columbia report has criticized NASA for its lack of insight and technical integration impacting its ability to provide safety. The Aldridge report is advocating NASA find new ways of doing business. Very early in the Space Launch Initiative (SLI) program a small team of engineers at MSFC were asked to propose a process for performing a system level assessment of a launch vehicle. The request was aimed primarily at providing insight and making NASA a "smart buyer." Out of this effort the VIPA team was created. The difference between the VIPA effort and many integration attempts is that VIPA focuses on using experienced people from various disciplines and a process which focuses them on a technically integrated assessment. Most previous attempts have focused on developing an all encompassing software tool. In addition, VIPA anchored its process formulation in the experience of its members and in early developmental Space Shuttle experience. The primary reference for this is NASA-TP-2001-210092, "Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned," and discussions with its authors. The foundations of VIPA's process are described. The VIPA team also recognized the need to drive detailed analysis earlier in the design process. Analyses and techniques typically done in later design phases, are brought forward using improved computing technology. The intent is to allow the identification of significant sensitivities, trades, and design issues much earlier in the program. This process is driven by the T-model for Technical Integration described in the aforementioned reference. VIPA's approach to performing system level technical integration is discussed in detail. Proposed definitions are offered to clarify this discussion and the general systems integration dialog. VIPA's capabilities and process can now be used to significantly enhance the development and monitoring of realizable project requirements. This is done through the use of VIPA's V-model. Starting with a given concept, VIPA's assessment validates the concept's stated performance, identifies significant issues either with the concept or the requirements, and then re-integrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program's insight and review process. The VIPA process has been employed successfully on several projects including SLI, Orbital Space Plane (OSP), and several heavy lift concepts for Exploration. It has also been proposed for use on the Jupiter Icy Moon (JIMO) spacecraft. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful. Selected results from these assessments will be presented.

Robotic pancreaticoduodenectomy in a case of duodenal gastrointestinal stromal tumor.

PubMed

Parisi, Amilcare; Desiderio, Jacopo; Trastulli, Stefano; Grassi, Veronica; Ricci, Francesco; Farinacci, Federico; Cacurri, Alban; Castellani, Elisa; Corsi, Alessia; Renzi, Claudio; Barberini, Francesco; D'Andrea, Vito; Santoro, Alberto; Cirocchi, Roberto

2014-12-04

Laparoscopic pancreaticoduodenectomy is rarely performed, and it has not been particularly successful due to its technical complexity. The objective of this study is to highlight how robotic surgery could improve a minimally invasive approach and to expose the usefulness of robotic surgery even in complex surgical procedures. The surgical technique employed in our center to perform a pancreaticoduodenectomy, which was by means of the da Vinci™ robotic system in order to remove a duodenal gastrointestinal stromal tumor, is reported. Robotic technology has improved significantly over the traditional laparoscopic approach, representing an evolution of minimally invasive techniques, allowing procedures to be safely performed that are still considered to be scarcely feasible or reproducible.

The Transgender Women of Color Initiative: Implementing and Evaluating Innovative Interventions to Enhance Engagement and Retention in HIV Care.

PubMed

Rebchook, Gregory; Keatley, JoAnne; Contreras, Robert; Perloff, Judy; Molano, Luis Freddy; Reback, Cathy J; Ducheny, Kelly; Nemoto, Tooru; Lin, Royce; Birnbaum, Jeffrey; Woods, Tiffany; Xavier, Jessica

2017-02-01

To improve health outcomes among transgender women of color living with HIV, the Health Resources and Services Administration's Special Programs of National Significance program funded the Enhancing Engagement and Retention in Quality HIV Care for Transgender Women of Color Initiative in 2012. Nine demonstration projects in four US urban areas implemented innovative, theory-based interventions specifically targeting transgender women of color in their jurisdictions. An evaluation and technical assistance center was funded to evaluate the outcomes of the access to care interventions, and these findings will yield best practices and lessons learned to improve the care and treatment of transgender women of color living with HIV infection.

Achieving TASAR Operational Readiness

NASA Technical Reports Server (NTRS)

Wing, David J.

2015-01-01

NASA has been developing and testing the Traffic Aware Strategic Aircrew Requests (TASAR) concept for aircraft operations featuring a NASA-developed cockpit automation tool, the Traffic Aware Planner (TAP), which computes traffic/hazard-compatible route changes to improve flight efficiency. The TAP technology is anticipated to save fuel and flight time and thereby provide immediate and pervasive benefits to the aircraft operator, as well as improving flight schedule compliance, passenger comfort, and pilot and controller workload. Previous work has indicated the potential for significant benefits for TASAR-equipped aircraft, and a flight trial of the TAP software application in the National Airspace System has demonstrated its technical viability. This paper reviews previous and ongoing activities to prepare TASAR for operational use.

Advanced Respiratory Motion Compensation for Coronary MR Angiography

PubMed Central

Henningsson, Markus; Botnar, Rene M.

2013-01-01

Despite technical advances, respiratory motion remains a major impediment in a substantial amount of patients undergoing coronary magnetic resonance angiography (CMRA). Traditionally, respiratory motion compensation has been performed with a one-dimensional respiratory navigator positioned on the right hemi-diaphragm, using a motion model to estimate and correct for the bulk respiratory motion of the heart. Recent technical advancements has allowed for direct respiratory motion estimation of the heart, with improved motion compensation performance. Some of these new methods, particularly using image-based navigators or respiratory binning, allow for more advanced motion correction which enables CMRA data acquisition throughout most or all of the respiratory cycle, thereby significantly reducing scan time. This review describes the three components typically involved in most motion compensation strategies for CMRA, including respiratory motion estimation, gating and correction, and how these processes can be utilized to perform advanced respiratory motion compensation. PMID:23708271

Who are the SETI sceptics?

NASA Astrophysics Data System (ADS)

Ćirković, Milan M.

2013-08-01

Search for ExtraTerrestrial Intelligence (SETI) is now more than half a century old and has provoked enough discussion on technical, philosophical, and popular level, much of it critical. Historically, the criticism of SETI has been strong enough to heavily influence the course of research, so that there is a significant interest in discerning the nuances and fine points of critical argumentation. In this paper, I outline the two major forms of SETI scepticism, "fundamentalist" and "instrumentalist," which are often conflated in the published literature, both technical and popular. Precise delineation between these two types of scepticism is important for future research as a part of a wider taxonomic project, the build-up of SETI theory, as well as for smooth joining of SETI with the ongoing astrobiological revolution. Resolving the confusion in this respect is likely to lead to an improved atmosphere and heightened public image of future SETI searches and related activities.

Molecular assays in detecting EGFR gene aberrations: an updated HER2-dependent algorithm for interpreting gene signals; a short technical report.

PubMed

Tsiambas, Evangelos; Ragos, Vasileios; Lefas, Alicia Y; Georgiannos, Stavros N; Rigopoulos, Dimitrios N; Georgakopoulos, Georgios; Stamatelopoulos, Athanasios; Grapsa, Dimitra; Syrigos, Konstantinos

2016-01-01

Purpose: Among oncogenes that have already been identified and cloned, Epidermal Growth Factor Receptor (EGFR) remains one of the most significant. Understanding its deregulation mechanisms improves critically patients' selection for personalized therapies based on modern molecular biology and oncology guidelines. Anti-EGFR targeted therapeutic strategies have been developed based on specific genetic profiles and applied in subgroups of patients suffering by solid cancers of different histogenetic origin. Detection of specific EGFR somatic mutations leads to tyrosine kinase inhibitors (TKIs) application in subsets of them. Concerning EGFR gene numerical imbalances, identification of pure gene amplification is critical for targeting the molecule via monoclonal antibodies (mAbs). In the current technical paper we demonstrate the main molecular methods applied in EGFR analyses focused also on new data in interpreting numerical imbalances based on ASCO/ACAP guidelines for HER2 in situ hybridization (ISH) clarifications.

Fluorescent Lamp Glass Waste Incorporation into Clay Ceramic: A Perfect Solution

NASA Astrophysics Data System (ADS)

Morais, Alline Sardinha Cordeiro; Vieira, Carlos Maurício Fontes; Rodriguez, Rubén Jesus Sanchez; Monteiro, Sergio Neves; Candido, Veronica Scarpini; Ferreira, Carlos Luiz

2016-09-01

The mandatory use of fluorescent lamps as part of a Brazilian energy-saving program generates a huge number of spent fluorescent lamps (SFLs). After operational life, SFLs cannot be disposed as common garbage owing to mercury and lead contamination. Recycling methods separate contaminated glass tubes and promote cleaning for reuse. In this work, glass from decontaminated SFLs was incorporated into clay ceramics, not only as an environmental solution for such glass wastes and clay mining reduction but also due to technical and economical advantages. Up to 30 wt.% of incorporation, a significant improvement in fired ceramic flexural strength and a decrease in water absorption was observed. A prospective analysis showed clay ceramic incorporation as an environmentally correct and technical alternative for recycling the enormous amount of SFLs disposed of in Brazil. This could also be a solution for other world clay ceramic producers, such as US, China and some European countries.

Physical Origins of Space Weather Impacts: Open Physics Questions

NASA Astrophysics Data System (ADS)

Lanzerotti, L. J.

2011-12-01

Beginning with the era of development of electrical telegraph systems in the early 19th century, physical processes in the space environment on the Sun, in the interplanetary medium, and around Earth have influenced the design and operations of ever-increasing and sophisticated technical systems, both in space and on the ground. Understanding of Earth's space environment has increased enormously in the last century and one-half. Nevertheless, many of the physical processes that produced effects on early cable and wireless technologies continue to plague modern-day systems. And as new technologies are developed for improved communications, surveillance, navigation, and conditions for human space flight, the solar-terrestrial environment often offers surprises to their safe, secure and uninterrupted operations. This talk will address some of the challenges that I see to the successful operations of some modern-day technical systems that are posed by significant deficiencies of understanding of physical processes operating from the Sun to the Earth.

Development of a decision aid for energy resource management for the Navajo Nation incorporating environmental cultural values

NASA Astrophysics Data System (ADS)

Necefer, Len Edward

Decision-making surrounding pathways of future energy resource management are complexity and requires balancing tradeoffs of multiple environmental, social, economic, and technical outcomes. Technical decision aid can provide a framework for informed decision making, allowing individuals to better understand the tradeoff between resources, technology, energy services, and prices. While technical decision aid have made significant advances in evaluating these quantitative aspects of energy planning and performance, they have not been designed to incorporate human factors, such as preferences and behavior that are informed by cultural values. Incorporating cultural values into decision tools can provide not only an improved decision framework for the Navajo Nation, but also generate new insights on how these perspective can improve decision making on energy resources. Ensuring these aids are a cultural fit for each context has the potential to increase trust and promote understanding of the tradeoffs involved in energy resource management. In this dissertation I present the development of a technical tool that explicitly addresses cultural and spiritual values and experimentally assesses their influence on the preferences and decision making of Navajo citizens. Chapter 2 describes the results of a public elicitation effort to gather information about stakeholder views and concerns related to energy development in the Navajo Nation in order to develop a larger sample survey and a decision-support tool that links techno-economic energy models with sociocultural attributes. Chapter 3 details the methods of developing the energy decision aid and its underlying assumptions for alternative energy projects and their impacts. This tool also provides an alternative to economic valuation of cultural impacts based upon an ordinal index tied to environmental impacts. Chapter 4 details the the influence of various cultural, environmental, and economic outcome information provided through the developed decision aid on beliefs and preferences related to the type and scale of energy development, trust of decision makers, and larger concern for environmental protection. Finally, chapter 5 presents concluding thoughts future research and on how technical-social decision tools can provide a means ensuring effective decision making on the Navajo Nation and other American Indian communities.

Socio-technical strategies and behavior change to increase the adoption and sustainability of wastewater resource recovery systems.

PubMed

Prouty, Christine; Mohebbi, Shima; Zhang, Qiong

2018-06-15

Given the increasing vulnerability of communities to the negative impacts of untreated wastewater, resource recovery (RR) systems provide a paradigm shift away from a traditional approach of waste separation and treatment towards a productive recovery of water, energy and nutrients. The aim of this research is to understand the relationships between factors that influence the adoption and sustainability of wastewater-based RR systems to inform technology implementation strategies. The study presents a theory-informed, community-influenced system dynamics (SD) model to provide decision-makers with an adaptable tool that simulates system-level responses to the strategies that are developed for the coastal town of Placencia, Belize. The modeling framework is informed by literature-based theories such as the theory of diffusion of innovations (TDI) and the theory of planned behavior (TPB). Various methods, including surveys, interviews, participatory observations, and a water constituents mass balance analysis are used to validate relationships and numerically populate the model. The SD model was evaluated with field data and simulated to identify strategies that will improve the adoption and sustainability of RR systems. Site demonstrations (marketing strategy) made a significant impact on the stock of adopted RR systems. The stock of sustained RR systems is driven by the sustainability rate (i.e. economic and environmental viability) which can be improved by more site demonstrations and tank options (technical strategy). These strategies, however, only contributed to incremental improvements in the system's sustainability performance. This study shows that changing community behaviors (i.e. reporting the correct number of users and reclaiming resources), represented by structural change in the SD model, is the more significant way to influence the sustainable management of the community's wastewater resources. Copyright © 2018 Elsevier Ltd. All rights reserved.

Rolling scheduling of electric power system with wind power based on improved NNIA algorithm

NASA Astrophysics Data System (ADS)

Xu, Q. S.; Luo, C. J.; Yang, D. J.; Fan, Y. H.; Sang, Z. X.; Lei, H.

2017-11-01

This paper puts forth a rolling modification strategy for day-ahead scheduling of electric power system with wind power, which takes the operation cost increment of unit and curtailed wind power of power grid as double modification functions. Additionally, an improved Nondominated Neighbor Immune Algorithm (NNIA) is proposed for solution. The proposed rolling scheduling model has further improved the operation cost of system in the intra-day generation process, enhanced the system’s accommodation capacity of wind power, and modified the key transmission section power flow in a rolling manner to satisfy the security constraint of power grid. The improved NNIA algorithm has defined an antibody preference relation model based on equal incremental rate, regulation deviation constraints and maximum & minimum technical outputs of units. The model can noticeably guide the direction of antibody evolution, and significantly speed up the process of algorithm convergence to final solution, and enhance the local search capability.

Robotics in Orthopedics: A Brave New World.

PubMed

Parsley, Brian S

2018-02-16

Future health-care projection projects a significant growth in population by 2020. Health care has seen an exponential growth in technology to address the growing population with the decreasing number of physicians and health-care workers. Robotics in health care has been introduced to address this growing need. Early adoption of robotics was limited because of the limited application of the technology, the cumbersome nature of the equipment, and technical complications. A continued improvement in efficacy, adaptability, and cost reduction has stimulated increased interest in robotic-assisted surgery. The evolution in orthopedic surgery has allowed for advanced surgical planning, precision robotic machining of bone, improved implant-bone contact, optimization of implant placement, and optimization of the mechanical alignment. The potential benefits of robotic surgery include improved surgical work flow, improvements in efficacy and reduction in surgical time. Robotic-assisted surgery will continue to evolve in the orthopedic field. Copyright © 2018 Elsevier Inc. All rights reserved.

Health innovation for patient safety improvement.

PubMed

Sellappans, Renukha; Chua, Siew Siang; Tajuddin, Nur Amani Ahmad; Mei Lai, Pauline Siew

2013-01-01

Medication error has been identified as a major factor affecting patient safety. Many innovative efforts such as Computerised Physician Order Entry (CPOE), a Pharmacy Information System, automated dispensing machines and Point of Administration Systems have been carried out with the aim of improving medication safety. However, areas remain that require urgent attention. One main area will be the lack of continuity of care due to the breakdown of communication between multiple healthcare providers. Solutions may include consideration of "health smart cards" that carry vital patient medical information in the form of a "credit card" or use of the Malaysian identification card. However, costs and technical aspects associated with the implementation of this health smart card will be a significant barrier. Security and confidentiality, on the other hand, are expected to be of primary concern to patients. Challenges associated with the implementation of a health smart card might include physician buy-in for use in his or her everyday practice. Training and technical support should also be available to ensure the smooth implementation of this system. Despite these challenges, implementation of a health smart card moves us closer to seamless care in our country, thereby increasing the productivity and quality of healthcare.

Modeling and Quantification of Team Performance in Human Reliability Analysis for Probabilistic Risk Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey C. JOe; Ronald L. Boring

Probabilistic Risk Assessment (PRA) and Human Reliability Assessment (HRA) are important technical contributors to the United States (U.S.) Nuclear Regulatory Commission’s (NRC) risk-informed and performance based approach to regulating U.S. commercial nuclear activities. Furthermore, all currently operating commercial NPPs in the U.S. are required by federal regulation to be staffed with crews of operators. Yet, aspects of team performance are underspecified in most HRA methods that are widely used in the nuclear industry. There are a variety of "emergent" team cognition and teamwork errors (e.g., communication errors) that are 1) distinct from individual human errors, and 2) important to understandmore » from a PRA perspective. The lack of robust models or quantification of team performance is an issue that affects the accuracy and validity of HRA methods and models, leading to significant uncertainty in estimating HEPs. This paper describes research that has the objective to model and quantify team dynamics and teamwork within NPP control room crews for risk informed applications, thereby improving the technical basis of HRA, which improves the risk-informed approach the NRC uses to regulate the U.S. commercial nuclear industry.« less

78 FR 2449 - Office of Small Credit Unions (OSCUI) Grant Program Access for Credit Unions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-11

... availability. The OSCUI Grant Program serves as a source of financial support, in the form of technical... provides financial support in the form of technical assistance grants to LICUs. These funds help improve...

Goddard Geophysical and Astronomical Observatory

NASA Technical Reports Server (NTRS)

Redmond, Jay; Kodak, Charles

2004-01-01

This report summarizes the technical parameters and the technical staff of the VLBI system at the fundamental station GGAO. It also gives an overview about the VLBI activities during the previous year. The outlook lists the outstanding tasks to improve the performance of GGAO.

The Development of Technical and Vocational Education in India--A Case Study in Quality Improvement. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Mishra, Arun K.

Education has a place of high priority on India's development agenda. The technical/vocational education (TVE) system is multisectoral with each ministry responsible for labor force development in that sector. The TVE programs in the formal education system are either state delivered or financed. The higher secondary vocational education program…

The Development of Technical and Vocational Education in Indonesia--A Case Study in Quality Improvement. Case Studies on Technical and Vocational Education in Asia and the Pacific.

ERIC Educational Resources Information Center

Bakri, Mohamad

After its independence in 1969, Indonesia studied and analyzed its previous colonial system of technical and vocational education (TVE) and took steps to overcome the shortcomings. TVE was required to provide expansion of work opportunities and industrial development to promote national development. Until 1989, attention was given to further…

SELECTIVE DISSEMINATION OF INFORMATION (SDI). VOLUME I, PILOT TEST AT U.S. ARMY NATICK LABORATORIES. FINAL REPORT. ARMY TECHNICAL LIBRARY IMPROVEMENT STUDIES (ATLIS), REPORT NO. 15.

ERIC Educational Resources Information Center

BIVONA, WILLIAM A.

THIS VOLUME PRESENTS THE RESULTS OF A NINE-MONTH TEST OF A PROTOTYPE SELECTIVE DISSEMINATION OF INFORMATION (SDI) SYSTEM DEVELOPED FOR THE ARMY TECHNICAL LIBRARIES. DURING THE PILOT TEST ONE THOUSAND DOCUMENTS WERE CATALOGED, INDEXED, AND DISSEMINATED TO TWENTY-FIVE SCIENTIFIC AND TECHNICAL PERSONNEL. MATCHING OF THE INTEREST PROFILES OF THESE…

Improving automation standards via semantic modelling: Application to ISA88.

PubMed

Dombayci, Canan; Farreres, Javier; Rodríguez, Horacio; Espuña, Antonio; Graells, Moisès

2017-03-01

Standardization is essential for automation. Extensibility, scalability, and reusability are important features for automation software that rely in the efficient modelling of the addressed systems. The work presented here is from the ongoing development of a methodology for semi-automatic ontology construction methodology from technical documents. The main aim of this work is to systematically check the consistency of technical documents and support the improvement of technical document consistency. The formalization of conceptual models and the subsequent writing of technical standards are simultaneously analyzed, and guidelines proposed for application to future technical standards. Three paradigms are discussed for the development of domain ontologies from technical documents, starting from the current state of the art, continuing with the intermediate method presented and used in this paper, and ending with the suggested paradigm for the future. The ISA88 Standard is taken as a representative case study. Linguistic techniques from the semi-automatic ontology construction methodology is applied to the ISA88 Standard and different modelling and standardization aspects that are worth sharing with the automation community is addressed. This study discusses different paradigms for developing and sharing conceptual models for the subsequent development of automation software, along with presenting the systematic consistency checking method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

[Do laymen understand information about hospital quality? An empirical verification using risk-adjusted mortality rates as an example].

PubMed

Sander, Uwe; Kolb, Benjamin; Taheri, Fatemeh; Patzelt, Christiane; Emmert, Martin

2017-11-01

The effect of public reporting to improve quality in healthcare is reduced by the limited intelligibility of information about the quality of healthcare providers. This may result in worse health-related choices especially for older people and those with lower levels of education. There is, as yet, little information as to whether laymen understand the concepts behind quality comparisons and if this comprehension is correlated with hospital choices. An instrument with 20 items was developed to analyze the intelligibility of five technical terms which were used in German hospital report cards to explain risk-adjusted death rates. Two online presentations of risk-adjusted death rates for five hospitals in the style of hospital report cards were developed. An online survey of 353 volunteers tested the comprehension of the risk-adjusted mortality rates and included an experimental hospital choice. The intelligibility of five technical terms was tested: risk-adjusted, actual and expected death rate, reference range and national average. The percentages of correct answers for the five technical terms were in the range of 75.0-60.2%. Between 23.8% and 5.1% of the respondents were not able to answer the question about the technical term itself. The least comprehensible technical terms were "risk-adjusted death rate" and "reference range". The intelligibility of the 20 items that were used to test the comprehension of the risk-adjusted mortality was between 89.5% and 14.2%. The two items that proved to be least comprehensible were related to the technical terms "risk-adjusted death rate" and "reference range". For all five technical terms it was found that a better comprehension correlated significantly with better hospital choices. We found a better than average intelligibility for the technical terms "actual and expected death rate" and for "national average". The least understandable were "risk-adjusted death rate" and "reference range". Since the self-explanatory technical terms "actual and expected death rate" and "national average" are easy to understand and the comprehension is correlated with hospitals choices, we recommend using them for the presentation of measures which contain risk-adjusted mortality. The technical terms "risk-adjusted death rate" and "reference range" should stay in the background, since comprehension problems can be expected and explanations would have to be provided. Copyright © 2017. Published by Elsevier GmbH.

[Quality management (TQM) in public health-care (PHC): principles for cost-performance calculations and cost reductions with better quality].

PubMed

Bergholz, W

2008-11-01

In many high-tech industries, quality management (QM) has enabled improvements of quality by a factor of 100 or more, in combination with significant cost reductions. Compared to this, the application of QM methods in health care is in its initial stages. It is anticipated that stringent process management, embedded in an effective QM system will lead to significant improvements in health care in general and in the German public health service in particular. Process management is an ideal platform for controlling in the health care sector, and it will significantly improve the leverage of controlling to bring down costs. Best practice sharing in industry has led to quantum leap improvements. Process management will enable best practice sharing also in the public health service, in spite of the highly diverse portfolio of services that the public health service offers in different German regions. Finally, it is emphasised that "technical" QM, e.g., on the basis of the ISO 9001 standard is not sufficient to reach excellence. It is necessary to integrate soft factors, such as patient or employee satisfaction, and leadership quality into the system. The EFQM model for excellence can serve as proven tool to reach this goal.

An Interdisciplinary Program in Technical Communications: Problems Encountered.

ERIC Educational Resources Information Center

Eckman, Martha

The need for experts in technical communication is growing significantly while the number of college graduates in the field accounts for less than one percent of the need. Three major types of problems should be considered in trying to establish a technical communication program: those involving society's need for better technical communicators,…

[Patients' perception on attention received from Health Centres non-sanitary staff].

PubMed

Ruiz Moral, R; Alba Dios, A; Jiménez García, C; González Neubauer, V; García Torres, M; Pérula de Torres, L A; Barrios Blasco, L

2011-01-01

To know patients' perceptions about relational aspects and technical procedures when they are attended by the administrative staff in Health Centres. To assess the utility of two ways for measuring satisfaction. Cross-sectional study carried out in people attending the administrative sections of Health Centres for diverse reasons. Just after the interaction with the administrative they were interviewed using two different questions for assessing their opinions and satisfaction with communicational and technical aspects related with their demands. Descriptive analysis. Significant differences among mean was explored by χ(2) test. Open-ended questions were grouped in categories in a process involving three researchers independently. Over than 90% (360) of the attendees declared to be satisfied or very satisfied with the service received from the staff personal. Nevertheless, among 18-36% gave suggestions for improving the service after their consultation. Independently the domain explored, people suggested the communicational, personal capability, quality and quantity of explanations and waiting time as the main aspects to be improved. Surveys with open-ended questions are more useful to assess the quality of the attention the citizens receive from no-sanitary staff in Health Centres. These type of questions are also more useful for detecting problems and planning new interventions. Relational and informative issues seem to be the most prioritary areas to improve in this section of Health Centres. Copyright © 2010 SECA. Published by Elsevier Espana. All rights reserved.

Pesticide use and biodiversity conservation in the Amazonian agricultural frontier.

PubMed

Schiesari, Luis; Waichman, Andrea; Brock, Theo; Adams, Cristina; Grillitsch, Britta

2013-06-05

Agricultural frontiers are dynamic environments characterized by the conversion of native habitats to agriculture. Because they are currently concentrated in diverse tropical habitats, agricultural frontiers are areas where the largest number of species is exposed to hazardous land management practices, including pesticide use. Focusing on the Amazonian frontier, we show that producers have varying access to resources, knowledge, control and reward mechanisms to improve land management practices. With poor education and no technical support, pesticide use by smallholders sharply deviated from agronomical recommendations, tending to overutilization of hazardous compounds. By contrast, with higher levels of technical expertise and resources, and aiming at more restrictive markets, large-scale producers adhered more closely to technical recommendations and even voluntarily replaced more hazardous compounds. However, the ecological footprint increased significantly over time because of increased dosage or because formulations that are less toxic to humans may be more toxic to other biodiversity. Frontier regions appear to be unique in terms of the conflicts between production and conservation, and the necessary pesticide risk management and risk reduction can only be achieved through responsibility-sharing by diverse stakeholders, including governmental and intergovernmental organizations, NGOs, financial institutions, pesticide and agricultural industries, producers, academia and consumers.

[Radical prostatectomy - pro robotic].

PubMed

Gillitzer, R

2012-05-01

Anatomical radical prostatectomy was introduced in the early 1980s by Walsh and Donker. Elucidation of key anatomical structures led to a significant reduction in the morbidity of this procedure. The strive to achieve similar oncological and functional results to this gold standard open procedure but with further reduction of morbidity through a minimally invasive access led to the establishment of laparoscopic prostatectomy. However, this procedure is complex and difficult and is associated with a long learning curve. The technical advantages of robotically assisted surgery coupled with the intuitive handling of the device led to increased precision and shortening of the learning curve. These main advantages, together with a massive internet presence and aggressive marketing, have resulted in a rapid dissemination of robotic radical prostatectomy and an increasing patient demand. However, superiority of robotic radical prostatectomy in comparison to the other surgical therapeutic options has not yet been proven on a scientific basis. Currently robotic-assisted surgery is an established technique and future technical improvements will certainly further define its role in urological surgery. In the end this technical innovation will have to be balanced against the very high purchase and running costs, which remain the main limitation of this technology.

Mycoplasma genitalium From Basic Science to Public Health: Summary of the Results From a National Institute of Allergy and Infectious Disesases Technical Consultation and Consensus Recommendations for Future Research Priorities.

PubMed

Martin, David H; Manhart, Lisa E; Workowski, Kimberly A

2017-07-15

This article lays out the research priorities for Mycoplasma genitalium research agreed upon by the participants in a 2016 National Institutes of Allergy and Infectious Diseases-funded Technical Consultation focused on this organism. The state of current knowledge concerning the microbiology, epidemiology, clinical manifestations of infection, treatment, and public health significance of M. genitalium reviewed at the meeting is described in detail in the individual articles included in this supplemental edition of the Journal of Infectious Diseases. Here we summarize the points made in these articles most relevant to the formulation of the research priorities listed in this article. The most important recommendation resulting from this Technical Consultation is the initiation of clinical trials designed to determine definitively whether screening for and treatment of M. genitalium infections in women and their sexual partners improve reproductive health in women and/or prevent human immunodeficiency virus transmission. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

Pesticide use and biodiversity conservation in the Amazonian agricultural frontier

PubMed Central

Schiesari, Luis; Waichman, Andrea; Brock, Theo; Adams, Cristina; Grillitsch, Britta

2013-01-01

Agricultural frontiers are dynamic environments characterized by the conversion of native habitats to agriculture. Because they are currently concentrated in diverse tropical habitats, agricultural frontiers are areas where the largest number of species is exposed to hazardous land management practices, including pesticide use. Focusing on the Amazonian frontier, we show that producers have varying access to resources, knowledge, control and reward mechanisms to improve land management practices. With poor education and no technical support, pesticide use by smallholders sharply deviated from agronomical recommendations, tending to overutilization of hazardous compounds. By contrast, with higher levels of technical expertise and resources, and aiming at more restrictive markets, large-scale producers adhered more closely to technical recommendations and even voluntarily replaced more hazardous compounds. However, the ecological footprint increased significantly over time because of increased dosage or because formulations that are less toxic to humans may be more toxic to other biodiversity. Frontier regions appear to be unique in terms of the conflicts between production and conservation, and the necessary pesticide risk management and risk reduction can only be achieved through responsibility-sharing by diverse stakeholders, including governmental and intergovernmental organizations, NGOs, financial institutions, pesticide and agricultural industries, producers, academia and consumers. PMID:23610177

Commercial versus technical cues to position a new product: Do hedonic and functional/healthy packages differ?

PubMed

Vila-López, Natalia; Küster-Boluda, Inés

2018-02-01

Packaging attributes can be classified into two main blocks: visual/commercial attributes and informational/technical ones. In this framework, our objectives are: (i) to compare if both kinds of attributes lead to equal responses (consumers' attitudes improvement and product trial) and (ii) to compare if they work equally when a hedonic or a healthy new product is launched into the young market. An experimental design was defined to reach both objectives. Two packaging attributes were manipulated orthogonally to introduce greater variation in people's perceptions: a visual cue (the color) and an informative cue (the claim/label). A third variable was introduced: hedonic (candy bars) versus functional/healthy products (juice with fruit and milk). In a laboratory, 300 young consumers chose and evaluated one of the different packages that were simulated (using different colors and labels). Our results show that both kinds of attributes are significant, but visual cues were more strongly associated with young consumers' positive attitudes towards the product and their intention to buy than technical cues. Results do not differ between the product categories.7. Copyright © 2017 Elsevier Ltd. All rights reserved.

77 FR 31499 - Medicaid and Children's Health Insurance Programs; Disallowance of Claims for FFP and Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-29

...This final rule reflects the Centers for Medicare & Medicaid Services' commitment to the general principles of the President's Executive Order 13563 released January 18, 2011, entitled ``Improving Regulation and Regulatory Review.'' This rule will: implement a new reconsideration process for administrative determinations to disallow claims for Federal financial participation (FFP) under title XIX of the Act (Medicaid); lengthen the time States have to credit the Federal government for identified but uncollected Medicaid provider overpayments and provide that interest will be due on amounts not credited within that time period; make conforming changes to the Medicaid and Children's Health Insurance Program (CHIP) disallowance process to allow States the option to retain disputed Federal funds through the new administrative reconsideration process; revise installment repayment standards and schedules for States that owe significant amounts; and provide that interest charges may accrue during the new administrative reconsideration process if a State chooses to retain the funds during that period. This final rule will also make a technical correction to reporting requirements for disproportionate share hospital payments, revise internal delegations of authority to reflect the term ``Administrator or current Designee,'' remove obsolete language, and correct other technical errors.

Technical and Economic Aspects of Designing an Efficient Room Air-Conditioner Program in India

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abhyankar, Nikit; Shah, Nihar; Phadke, Amol

Several studies have projected a massive increase in the demand for air conditioners (ACs) over the next two decades in India. By 2030, room ACs could add 140 GW to the peak load, equivalent to over 30% of the total projected peak load. Therefore, there is significant interest among policymakers, regulators, and utilities in managing room AC demand by enhancing energy efficiency. Building on the historical success of the Indian Bureau of Energy Efficiency’s star-labeling program, Energy Efficiency Services Limited recently announced a program to accelerate the sale of efficient room ACs using bulk procurement, similar to their successful UJALAmore » light-emitting diode (LED) bulk procurement program. This report discusses some of the key considerations in designing a bulk procurement or financial incentive program for enhancing room AC efficiency in India. We draw upon our previous research to demonstrate the overall technical potential and price impact of room AC efficiency improvement and its technical feasibility in India. We also discuss the importance of using low global warming potential (GWP) refrigerants and smart AC equipment that is demand response (DR) ready.« less

[Technical advancement improves survival in patients with locally advanced non-small cell lung cancer (LA-NSCLC) receiving definitive radiotherapy].

PubMed

Wang, J B; Jiang, W; Ji, Z; Cao, J Z; Liu, L P; Men, Y; Xu, C; Wang, X Z; Hui, Z G; Liang, J; Lyu, J M; Zhou, Z M; Xiao, Z F; Feng, Q F; Chen, D F; Zhang, H X; Yin, W B; Wang, L H

2016-08-01

This study aimed to evaluate the impact of technical advancement of radiation therapy in patients with LA-NSCLC receiving definitive radiotherapy (RT). Patients treated with definitive RT (≥50 Gy) between 2000 and 2010 were retrospectively reviewed. Overall survival (OS), cancer specific survival (CSS), locoregional progression-free survival (LRPFS), distant metastasis-free survival (DMFS) and progression-free survival (PFS) were calculated and compared among patients irradiated with different techniques. Radiation-induced lung injury (RILI) and esophageal injury (RIEI) were assessed according to the National Cancer Institute Common Terminology Criteria for Adverse Events 3.0 (NCI-CTCAE 3.0). A total of 946 patients were eligible for analysis, including 288 treated with two-dimensional radiotherapy (2D-RT), 209 with three-dimensional conformal radiation therapy (3D-CRT) and 449 with intensity-modulated radiation therapy (IMRT) respectively. The median follow-up time for the whole population was 84.1 months. The median OS of 2D-RT, 3D-CRT and IMRT groups were 15.8, 19.7 and 23.3 months, respectively, with the corresponding 5-year survival rate of 8.7%, 13.0% and 18.8%, respectively (P<0.001). The univariate analysis demonstrated significantly inferior OS, LRPFS, DMFS and PFS of 2D-RT than those provided by 3D-CRT or IMRT. The univariate analysis also revealed that the IMRT group had significantly loger LRPFS and a trend toward better OS and DMFS compared with 3D-CRT. Multivariate analysis showed that TNM stage, RT technique and KPS were independent factors correlated with all survival indexes. Compared with 2D-RT, the utilization of IMRT was associated with significantly improved OS, LRPFS, DMFS as well as PFS. Compared with 3D-CRT, IMRT provided superior DMFS (P=0.035), a trend approaching significance with regard to LRPFS (P=0.073) but no statistically significant improvement on OS, CSS and PFS in multivariate analysis. The incidence rates of RILI were significantly decreased in the IMRT group (29.3% vs. 26.6% vs.14.0%, P<0.001) whereas that of RIET rates were similar (34.7% vs. 29.7% vs. 35.3%, P=0.342) among the three groups. Radiation therapy technique is a factor affecting prognosis of LA-NSCLC patients. Advanced radiation therapy technique is associated with improved tumor control and survival, and decreased radiation-induced lung toxicity.

Technical communications in aerospace - An analysis of the practices reported by U.S. and European aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Barclay, Rebecca O.; Kennedy, John M.; Glassman, Myron

1990-01-01

The flow of scientific and technical information (STI) at the individual, organizational, national, and international levels is studied. The responses of U.S and European aerospace engineers and scientists to questionnaires concerning technical communications in aerospace are examined. Particular attention is given to the means used to communicate information and the social system of the aerospace knowledge diffusion process. Demographic data about the survey respondents are provided. The methods used to communicate technical data and the sources utilized to solve technical problems are described. The importance of technical writing skills and the use of computer technology in the aerospace field are discussed. The derived data are useful for R&D and information managers in order to improve access to and utilization of aerospace STI.

Robotics in keyhole transcranial endoscope-assisted microsurgery: a critical review of existing systems and proposed specifications for new robotic platforms.

PubMed

Marcus, Hani J; Seneci, Carlo A; Payne, Christopher J; Nandi, Dipankar; Darzi, Ara; Yang, Guang-Zhong

2014-03-01

Over the past decade, advances in image guidance, endoscopy, and tube-shaft instruments have allowed for the further development of keyhole transcranial endoscope-assisted microsurgery, utilizing smaller craniotomies and minimizing exposure and manipulation of unaffected brain tissue. Although such approaches offer the possibility of shorter operating times, reduced morbidity and mortality, and improved long-term outcomes, the technical skills required to perform such surgery are inevitably greater than for traditional open surgical techniques, and they have not been widely adopted by neurosurgeons. Surgical robotics, which has the ability to improve visualization and increase dexterity, therefore has the potential to enhance surgical performance. To evaluate the role of surgical robots in keyhole transcranial endoscope-assisted microsurgery. The technical challenges faced by surgeons utilizing keyhole craniotomies were reviewed, and a thorough appraisal of presently available robotic systems was performed. Surgical robotic systems have the potential to incorporate advances in augmented reality, stereoendoscopy, and jointed-wrist instruments, and therefore to significantly impact the field of keyhole neurosurgery. To date, over 30 robotic systems have been applied to neurosurgical procedures. The vast majority of these robots are best described as supervisory controlled, and are designed for stereotactic or image-guided surgery. Few telesurgical robots are suitable for keyhole neurosurgical approaches, and none are in widespread clinical use in the field. New robotic platforms in minimally invasive neurosurgery must possess clear and unambiguous advantages over conventional approaches if they are to achieve significant clinical penetration.

Improving the results of transarterial embolization of type 2 endoleaks with the embolic polymer Onyx.

PubMed

Wojtaszek, Mikolaj; Wnuk, Emilia; Maciag, Rafal; Solonynko, Bohdan; Korzeniowski, Krzysztof; Lamparski, Krzysztof; Rowinski, Olgierd

2016-01-01

Type 2 endoleaks (T2E) occur in 10 to 20% of patients after endovascular abdominal aortic aneurysm repair (EVAR) and remain a significant clinical issue. To evaluate the efficacy and clinical outcomes of transarterial treatment of persistent type II endoleaks after EVAR using the liquid embolic Onyx. From February 2012 to August 2015 transarterial T2E embolization was attempted in 22 patients (21 men, median age: 73, range: 62-88 years). Indications for treatment included an increase in the diameter of the aneurysm sac above 5 mm and a persistent endoleak observed for more than 6 months. Mean time from EVAR to endoleak treatment was 43 months (range: 2-125 months). Primary technical success was achieved in 17 (77.3%) patients and secondary technical success in 81.8%, with 0% in-hospital mortality. The mean procedure time was 95 ±48 min, with an average fluoroscopy time of 54 ±25 min. The mean amount of Onyx used was 7.5 ±6.6 ml. Clinical success was seen in 17/21 patients with follow-up imaging (80.9%). Mean follow-up time was 17 months (range: 3-38 months). Onyx has been shown to effectively stabilize previous aneurysm growth as a result of the T2E in the majority of our patients. Transarterial embolization of T2E can be significantly improved as compared to previously reported results by using liquid embolic polymers such as Onyx.

SEMAT--the next generation of inexpensive marine environmental monitoring and measurement systems.

PubMed

Trevathan, Jarrod; Johnstone, Ron; Chiffings, Tony; Atkinson, Ian; Bergmann, Neil; Read, Wayne; Theiss, Susan; Myers, Trina; Stevens, Tom

2012-01-01

There is an increasing need for environmental measurement systems to further science and thereby lead to improved policies for sustainable management. Marine environments are particularly hostile and extremely difficult for deploying sensitive measurement systems. As a consequence the need for data is greatest in marine environments, particularly in the developing economies/regions. Expense is typically the most significant limiting factor in the number of measurement systems that can be deployed, although technical complexity and the consequent high level of technical skill required for deployment and servicing runs a close second. This paper describes the Smart Environmental Monitoring and Analysis Technologies (SEMAT) project and the present development of the SEMAT technology. SEMAT is a "smart" wireless sensor network that uses a commodity-based approach for selecting technologies most appropriate to the scientifically driven marine research and monitoring domain/field. This approach allows for significantly cheaper environmental observation systems that cover a larger geographical area and can therefore collect more representative data. We describe SEMAT's goals, which include: (1) The ability to adapt and evolve; (2) Underwater wireless communications; (3) Short-range wireless power transmission; (4) Plug and play components; (5) Minimal deployment expertise; (6) Near real-time analysis tools; and (7) Intelligent sensors. This paper illustrates how the capacity of the system has been improved over three iterations towards realising these goals. The result is an inexpensive and flexible system that is ideal for short-term deployments in shallow coastal and other aquatic environments.

SEMAT — The Next Generation of Inexpensive Marine Environmental Monitoring and Measurement Systems

PubMed Central

Trevathan, Jarrod; Johnstone, Ron; Chiffings, Tony; Atkinson, Ian; Bergmann, Neil; Read, Wayne; Theiss, Susan; Myers, Trina; Stevens, Tom

2012-01-01

There is an increasing need for environmental measurement systems to further science and thereby lead to improved policies for sustainable management. Marine environments are particularly hostile and extremely difficult for deploying sensitive measurement systems. As a consequence the need for data is greatest in marine environments, particularly in the developing economies/regions. Expense is typically the most significant limiting factor in the number of measurement systems that can be deployed, although technical complexity and the consequent high level of technical skill required for deployment and servicing runs a close second. This paper describes the Smart Environmental Monitoring and Analysis Technologies (SEMAT) project and the present development of the SEMAT technology. SEMAT is a “smart” wireless sensor network that uses a commodity-based approach for selecting technologies most appropriate to the scientifically driven marine research and monitoring domain/field. This approach allows for significantly cheaper environmental observation systems that cover a larger geographical area and can therefore collect more representative data. We describe SEMAT's goals, which include: (1) The ability to adapt and evolve; (2) Underwater wireless communications; (3) Short-range wireless power transmission; (4) Plug and play components; (5) Minimal deployment expertise; (6) Near real-time analysis tools; and (7) Intelligent sensors. This paper illustrates how the capacity of the system has been improved over three iterations towards realising these goals. The result is an inexpensive and flexible system that is ideal for short-term deployments in shallow coastal and other aquatic environments. PMID:23012567

The influence of situation awareness training on nurses' confidence about patient safety skills: A prospective cohort study.

PubMed

Stomski, Norman; Gluyas, Heather; Andrus, Prue; Williams, Anne; Hopkins, Martin; Walters, Jennifer; Sandy, Martinique; Morrison, Paul

2018-04-01

Several studies report that patient safety skills, especially non-technical skills, receive scant attention in nursing curricula. Hence, there is a compelling reason to incorporate material that enhances non-technical skills, such as situation awareness, in nursing curricula in order to assist in the reduction of healthcare related adverse events. The objectives of this study were to: 1) understand final year nursing students' confidence in their patient safety skills; and 2) examine the impact of situation awareness training on final year nursing students' confidence in their patient safety skills. Participants were enrolled from a convenience sample comprising final year nursing students at a Western Australia university. Self-reported confidence in patient safety skills was assessed with the Health Professional in Patient Safety Survey before and after the delivery of a situation awareness educational intervention. Pre/post educational intervention differences were examined by repeated measures ANOVA. No significant differences in confidence about patient safety skills were identified within settings (class/clinical). However, confidence in patient safety skills significantly decreased between settings i.e. nursing students lost confidence after clinical placements. The educational intervention delivered in this study did not seem to improve confidence in patient safety skills, but substantial ceiling effects may have confounded the identification of such improvement. Further studies are required to establish whether the findings of this study can be generalised to other university nursing cohorts. Copyright © 2018 Elsevier Ltd. All rights reserved.

Low-Cost Simulation to Teach Anesthetists' Non-Technical Skills in Rwanda.

PubMed

Skelton, Teresa; Nshimyumuremyi, Isaac; Mukwesi, Christian; Whynot, Sara; Zolpys, Lauren; Livingston, Patricia

2016-08-01

Safe anesthesia care is challenging in developing countries where there are shortages of personnel, drugs, equipment, and training. Anesthetists' Non-technical Skills (ANTS)-task management, team working, situation awareness, and decision making-are difficult to practice well in this context. Cesarean delivery is the most common surgical procedure in sub-Saharan Africa. This pilot study investigates whether a low-cost simulation model, with good psychological fidelity, can be used effectively to teach ANTS during cesarean delivery in Rwanda. Study participants were anesthesia providers working in a tertiary referral hospital in Rwanda. Baseline observations were conducted for 20 anesthesia providers during cesarean delivery using the established ANTS framework. After the first observation set was complete, participants were randomly assigned to either simulation intervention or control groups. The simulation intervention group underwent ANTS training using low-cost high psychological fidelity simulation with debriefing. No training was offered to the control group. Postintervention observations were then conducted in the same manner as the baseline observations. The primary outcome was the overall ANTS score (maximum, 16). The median (range) ANTS score of the simulation group was 13.5 (11-16). The ANTS score of the control group was 8 (8-9), with a statistically significant difference (P = .002). Simulation participants showed statistically significant improvement in subcategories and in the overall ANTS score compared with ANTS score before simulation exposure. Rwandan anesthesia providers show improvement in ANTS practice during cesarean delivery after 1 teaching session using a low-cost high psychological fidelity simulation model with debriefing.

Lake States regional forest resources assessment: technical papers.

Treesearch

Henry H. Webster; J. Michael Vasievich

1997-01-01

Contains 21 technical working papers prepared for the Lake States regional forest resources assessment, Lake States Forestry Alliance 1995. They represent significant contributions from many individuals and organizations and form the technical background for the assessment.

Does Technical Success of Angioplasty in Dysfunctional Hemodialysis Accesses Correlate with Access Patency?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sidhu, Arshdeep; Tan, Kong T.; Noel-Lamy, Maxime

2016-10-15

PurposeTo study if <30 % residual stenosis post angioplasty (PTA) correlates with primary access circuit patency, and if any variables predict technical success.Materials and MethodsA prospective observational study was performed between January 2009 and December 2012, wherein 76 patients underwent 154 PTA events in 56 prosthetic grafts (AVG) and 98 autogenous fistulas (AVF). Data collected included patient age, gender, lesion location and laterality, access type and location, number of prior interventions, and transonic flow rates pre- and postintervention. Impact of technical outcome on access patency was assessed. Univariate logistic regression was used to assess the impact of variables on technical success withmore » significant factors assessed with a multiple variable model.ResultsTechnical success rates of PTA in AVFs and AVGs were 79.6 and 76.7 %, respectively. Technical failures of PTA were associated with an increased risk of patency loss among circuits with AVFs (p < 0.05), but not with AVGs (p = 0.7). In AVFs, primary access patency rates between technical successes and failures at three and 6 months were 74.4 versus 61.9 % (p = 0.3) and 53.8 versus 23.8 % (p < 0.05), respectively. In AVGs, primary access patency rates between technical successes and failures at three and six months were 72.1 versus 53.9 % (p = 0.5) and 33.6 versus 38.5 % (p = 0.8), respectively. Transonic flow rates did not significantly differ among technically successful or failed outcomes at one or three months.ConclusionTechnical failures of PTA had a significant impact on access patency among AVFs with a trend toward poorer access patency within AVGs.« less

Does Technical Success of Angioplasty in Dysfunctional Hemodialysis Accesses Correlate with Access Patency?

PubMed

Sidhu, Arshdeep; Tan, Kong T; Noel-Lamy, Maxime; Simons, Martin E; Rajan, Dheeraj K

2016-10-01

To study if <30 % residual stenosis post angioplasty (PTA) correlates with primary access circuit patency, and if any variables predict technical success. A prospective observational study was performed between January 2009 and December 2012, wherein 76 patients underwent 154 PTA events in 56 prosthetic grafts (AVG) and 98 autogenous fistulas (AVF). Data collected included patient age, gender, lesion location and laterality, access type and location, number of prior interventions, and transonic flow rates pre- and postintervention. Impact of technical outcome on access patency was assessed. Univariate logistic regression was used to assess the impact of variables on technical success with significant factors assessed with a multiple variable model. Technical success rates of PTA in AVFs and AVGs were 79.6 and 76.7 %, respectively. Technical failures of PTA were associated with an increased risk of patency loss among circuits with AVFs (p < 0.05), but not with AVGs (p = 0.7). In AVFs, primary access patency rates between technical successes and failures at three and 6 months were 74.4 versus 61.9 % (p = 0.3) and 53.8 versus 23.8 % (p < 0.05), respectively. In AVGs, primary access patency rates between technical successes and failures at three and six months were 72.1 versus 53.9 % (p = 0.5) and 33.6 versus 38.5 % (p = 0.8), respectively. Transonic flow rates did not significantly differ among technically successful or failed outcomes at one or three months. Technical failures of PTA had a significant impact on access patency among AVFs with a trend toward poorer access patency within AVGs.

Rating teams' non-technical skills in the emergency department: A qualitative study of nurses' experience.

PubMed

Porter, Joanne E; Cant, Robyn P; Cooper, Simon J

2018-05-01

Non-technical skills (NTS) teamwork training can enhance clinicians' understanding of roles and improve communication. We evaluated a quality improvement project rating teams' NTS performance to determine the value of formal rating and debriefing processes. In two Australian emergency departments the NTS of resuscitation teams were rated by senior nurses and medical staff. Key measures were leadership, teamwork, and task management using a valid instrument: Team Emergency Assessment Measure (TEAM™). Emergency nurses were asked to attend a focus group from which key themes around the quality improvement process were identified. Main themes were: 'Team composition' (allocation of resuscitation team roles), 'Resuscitation leadership' (including both nursing and medical leadership roles) and 'TEAM™ ratings promote reflective practice' (providing staff a platform to discuss team effectiveness). Objective ratings were seen as enabling staff to provide feedback to other team members. Reflection on practice and debriefing were thought to improve communication, help define roles and responsibilities, and clarify leadership roles. Use of a non-technical skills rating scheme such as TEAM™ after team-based clinical resuscitation events was seen by emergency department nurses as feasible and a useful process for examining and improving multi-disciplinary practice, while improving team performance. Copyright © 2018 Elsevier Ltd. All rights reserved.

Using interactive problem-solving techniques to enhance control systems education for non English-speakers

NASA Astrophysics Data System (ADS)

Lamont, L. A.; Chaar, L.; Toms, C.

2010-03-01

Interactive learning is beneficial to students in that it allows the continual development and testing of many skills. An interactive approach enables students to improve their technical capabilities, as well as developing both verbal and written communicative ability. Problem solving and communication skills are vital for engineering students; in the workplace they will be required to communicate with people of varying technical abilities and from different linguistic and engineering backgrounds. In this paper, a case study is presented that discusses how the traditional method of teaching control systems can be improved. 'Control systems' is a complex engineering topic requiring students to process an extended amount of mathematical formulae. MATLAB software, which enables students to interactively compare a range of possible combinations and analyse the optimal solution, is used to this end. It was found that students became more enthusiastic and interested when given ownership of their learning objectives. As well as improving the students' technical knowledge, other important engineering skills are also improved by introducing an interactive method of teaching.

The necessary burden of involving stakeholders in agent-based modelling for education and decision-making

NASA Astrophysics Data System (ADS)

Bommel, P.; Bautista Solís, P.; Leclerc, G.

2016-12-01

We implemented a participatory process with water stakeholders for improving resilience to drought at watershed scale, and for reducing water pollution disputes in drought prone Northwestern Costa Rica. The purpose is to facilitate co-management in a rural watershed impacted by recurrent droughts related to ENSO. The process involved designing "ContaMiCuenca", a hybrid agent-based model where users can specify the decisions of their agents. We followed a Companion Modeling approach (www.commod.org) and organized 10 workshops that included research techniques such as participatory diagnostics, actor-resources-interaction and UML diagrams, multi-agents model design, and interactive simulation sessions. We collectively assessed the main water issues in the watershed, prioritized their importance, defined the objectives of the process, and pilot-tested ContaMiCuenca for environmental education with adults and children. Simulation sessions resulted in debates about the need to improve the model accuracy, arguably more relevant for decision-making. This helped identify sensible knowledge gaps in the groundwater pollution and aquifer dynamics that need to be addressed in order to improve our collective learning. Significant mismatches among participants expectations, objectives, and agendas considerably slowed down the participatory process. The main issue may originate in participants expecting technical solutions from a positivist science, as constantly promoted in the region by dole-out initiatives, which is incompatible with the constructivist stance of participatory modellers. This requires much closer interaction of community members with modellers, which may be hard to attain in the current research practice and institutional context. Nevertheless, overcoming these constraints is necessary for a true involvement of water stakeholders to achieve community-based decisions that facilitate integrated water management. Our findings provide significant guidance for improving the trans-generational engagement of stakeholders in participatory modeling processes in a context of limited technical skills and information, research expectative mismatches, and poor multi-stakeholder interaction for decision-making.

Comparison of practice based research network based quality improvement technical assistance and evaluation to other ongoing quality improvement efforts for changes in agency culture.

PubMed

Livingood, William C; Peden, Angela H; Shah, Gulzar H; Marshall, Nandi A; Gonzalez, Ketty M; Toal, Russell B; Alexander, Dayna S; Wright, Alesha R; Woodhouse, Lynn D

2015-07-31

Public health agencies in the USA are increasingly challenged to adopt Quality Improvement (QI) strategies to enhance performance. Many of the functional and structural barriers to effective use of QI can be found in the organizational culture of public health agencies. The purpose of this study was to assess the impact of public health practice based research network (PBRN) evaluation and technical assistance for QI interventions on the organizational culture of public health agencies in Georgia, USA. An online survey of key informants in Georgia's districts and county health departments was used to compare perceptions of characteristics of organizational QI culture between PBRN supported QI districts and non-PBRN supported districts before and after the QI interventions. The primary outcomes of concern were number and percentage of reported increases in characteristics of QI culture as measured by key informant responses to items assessing organizational QI practices from a validated instrument on QI Collaboratives. Survey results were analyzed using Multi-level Mixed Effects Logistic Model, which accounts for clustering/nesting. Increases in QI organizational culture were consistent for all 10- items on a QI organizational culture survey related to: leadership support, use of data, on-going QI, and team collaboration. Statistically significant odds ratios were calculated for differences in increased QI organizational culture between PBRN-QI supported districts compared to Non-PBRN supported districts for 5 of the 10 items, after adjusting for District clustering of county health departments. Agency culture, considered by many QI experts as the main goal of QI, is different than use of specific QI methods, such as Plan-Do-Study-Act (PDSA) cycles or root-cause analyses. The specific use of a QI method does not necessarily reflect culture change. Attempts to measure QI culture are newly emerging. This study documented significant improvements in characteristics of organizational culture and demonstrated the potential of PBRNs to support agency QI activities.

Assessment of continuous acoustic respiratory rate monitoring as an addition to a pulse oximetry-based patient surveillance system.

PubMed

McGrath, Susan P; Pyke, Joshua; Taenzer, Andreas H

2017-06-01

Technology advances make it possible to consider continuous acoustic respiratory rate monitoring as an integral component of physiologic surveillance systems. This study explores technical and logistical aspects of augmenting pulse oximetry-based patient surveillance systems with continuous respiratory rate monitoring and offers some insight into the impact on patient deterioration detection that may result. Acoustic respiratory rate sensors were introduced to a general care pulse oximetry-based surveillance system with respiratory rate alarms deactivated. Simulation was used after 4324 patient days to determine appropriate alarm thresholds for respiratory rate, which were then activated. Data were collected for an additional 4382 patient days. Physiologic parameters, alarm data, sensor utilization and patient/staff feedback were collected throughout the study and analyzed. No notable technical or workflow issues were observed. Sensor utilization was 57 %, with patient refusal leading reasons for nonuse (22.7 %). With respiratory rate alarm thresholds set to 6 and 40 breaths/min., the majority of nurse pager clinical notifications were triggered by low oxygen saturation values (43 %), followed by low respiratory rate values (21 %) and low pulse rate values (13 %). Mean respiratory rate collected was 16.6 ± 3.8 breaths/min. The vast majority (82 %) of low oxygen saturation states coincided with normal respiration rates of 12-20 breaths/min. Continuous respiratory rate monitoring can be successfully added to a pulse oximetry-based surveillance system without significant technical, logistical or workflow issues and is moderately well-tolerated by patients. Respiratory rate sensor alarms did not significantly impact overall system alarm burden. Respiratory rate and oxygen saturation distributions suggest adding continuous respiratory rate monitoring to a pulse oximetry-based surveillance system may not significantly improve patient deterioration detection.

Optimized multiparametric flow cytometric analysis of circulating endothelial cells and their subpopulations in peripheral blood of patients with solid tumors: a technical analysis.

PubMed

Zhou, Fangbin; Zhou, Yaying; Yang, Ming; Wen, Jinli; Dong, Jun; Tan, Wenyong

2018-01-01

Circulating endothelial cells (CECs) and their subpopulations could be potential novel biomarkers for various malignancies. However, reliable enumerable methods are warranted to further improve their clinical utility. This study aimed to optimize a flow cytometric method (FCM) assay for CECs and subpopulations in peripheral blood for patients with solid cancers. An FCM assay was used to detect and identify CECs. A panel of 60 blood samples, including 44 metastatic cancer patients and 16 healthy controls, were used in this study. Some key issues of CEC enumeration, including sample material and anticoagulant selection, optimal titration of antibodies, lysis/wash procedures of blood sample preparation, conditions of sample storage, sufficient cell events to enhance the signal, fluorescence-minus-one controls instead of isotype controls to reduce background noise, optimal selection of cell surface markers, and evaluating the reproducibility of our method, were integrated and investigated. Wilcoxon and Mann-Whitney U tests were used to determine statistically significant differences. In this validation study, we refined a five-color FCM method to detect CECs and their subpopulations in peripheral blood of patients with solid tumors. Several key technical issues regarding preanalytical elements, FCM data acquisition, and analysis were addressed. Furthermore, we clinically validated the utility of our method. The baseline levels of mature CECs, endothelial progenitor cells, and activated CECs were higher in cancer patients than healthy subjects ( P <0.01). However, there was no significant difference in resting CEC levels between healthy subjects and cancer patients ( P =0.193). We integrated and comprehensively addressed significant technical issues found in previously published assays and validated the reproducibility and sensitivity of our proposed method. Future work is required to explore the potential of our optimized method in clinical oncologic applications.

Quality Improvement in Surgery Combining Lean Improvement Methods with Teamwork Training: A Controlled Before-After Study

PubMed Central

Robertson, Eleanor; Morgan, Lauren; New, Steve; Pickering, Sharon; Hadi, Mohammed; Collins, Gary; Rivero Arias, Oliver; Griffin, Damian; McCulloch, Peter

2015-01-01

Background To investigate the effectiveness of combining teamwork training and lean process improvement, two distinct approaches to improving surgical safety. We conducted a controlled interrupted time series study in a specialist UK Orthopaedic hospital incorporating a plastic surgery team (which received the intervention) and an Orthopaedic theatre team acting as a control. Study Design We used a 3 month intervention with 3 months data collection period before and after it. A combined teamwork training and lean process improvement intervention was delivered by an experienced specialist team. Before and after the intervention we evaluated team non-technical skills using NOTECHS II, technical performance using the glitch rate and WHO checklist compliance using a simple 3 point scale. We recorded complication rate, readmission rate and length of hospital stay data for 6 months before and after the intervention. Results In the active group, but not the control group, full compliance with WHO Time Out (T/O) increased from 14 to 71% (p = 0.032), Sign Out attempt rate (S/O) increased from 0% to 50% (p<0.001) and Oxford NOTECHS II scores increased after the intervention (P = 0.058). Glitch rate decreased in the active group and increased in the control group (p = 0.001). Complications and length of stay appeared to rise in the control group and fall in the active group. Conclusions Combining teamwork training and systems improvement enhanced both technical and non-technical operating team process measures, and were associated with a trend to better safety outcome measures in a controlled study comparison. We suggest that approaches which address both system and culture dimensions of safety may prove valuable in reducing risks to patients. PMID:26381643

Identifying knowledge activism in worker health and safety representation: A cluster analysis.

PubMed

Hall, Alan; Oudyk, John; King, Andrew; Naqvi, Syed; Lewchuk, Wayne

2016-01-01

Although worker representation in OHS has been widely recognized as contributing to health and safety improvements at work, few studies have examined the role that worker representatives play in this process. Using a large quantitative sample, this paper seeks to confirm findings from an earlier exploratory qualitative study that worker representatives can be differentiated by the knowledge intensive tactics and strategies that they use to achieve changes in their workplace. Just under 900 worker health and safety representatives in Ontario completed surveys which asked them to report on the amount of time they devoted to different types of representation activities (i.e., technical activities such as inspections and report writing vs. political activities such as mobilizing workers to build support), the kinds of conditions or hazards they tried to address through their representation (e.g., housekeeping vs. modifications in ventilation systems), and their reported success in making positive improvements. A cluster analysis was used to determine whether the worker representatives could be distinguished in terms of the relative time devoted to different activities and the clusters were then compared with reference to types of intervention efforts and outcomes. The cluster analysis identified three distinct groupings of representatives with significant differences in reported types of interventions and in their level of reported impact. Two of the clusters were consistent with the findings in the exploratory study, identified as knowledge activism for greater emphasis on knowledge based political activity and technical-legal representation for greater emphasis on formalized technical oriented procedures and legal regulations. Knowledge activists were more likely to take on challenging interventions and they reported more impact across the full range of interventions. This paper provides further support for the concepts of knowledge activism and technical-legal representation when differentiating the strategic orientations and impact of worker health and safety representatives, with important implications for education, political support and recruitment. © 2015 Wiley Periodicals, Inc.

Comparisons: Technical-Tactical and Time-Motion Analysis of Mixed Martial Arts by Outcomes.

PubMed

Miarka, Bianca; Vecchio, Fabrício B D; Camey, Suzi; Amtmann, John A

2016-07-01

Miarka, B, Vecchio, FBD, Camey, S, and Amtmann, JA. Comparisons: technical-tactical and time-motion analysis of mixed martial arts by outcomes. J Strength Cond Res 30(7): 1975-1984, 2016-The aim of this study was to compare time-motion and technical-tactical analysis between paired outcomes and rounds of mixed martial arts (MMA) matches. The sample consisted of 645 rounds of MMA competition paired by outcomes (first round, winners n = 215 and losers n = 215; second round, winners n = 215 and losers n = 215; third round, winners n = 215 and losers n = 215). The time-motion variables were categorized into low-intensity or high-intensity, stand-up or groundwork situations. Stand-up techniques were analyzed by observing total strikes to the head and body, and takedowns. The actions on the ground were analyzed by observing submission activity, including successful choking and joint locking actions, and also positional improvements, including advances to the mount, half guard, and side and back positions. Chi-squared and Wilcoxon tests were conducted with a significance level of p ≤ 0.05. Results showed that winners had higher values for total strikes and submissions in all rounds, and also positional improvements, over losers. The standing combat with low-intensity comparisons presented differences between the rounds first, with a median of 2:33.5 (P25-P75%: 1:20-3:56) minute, second, with 2:37 (1:24-3:59) minute, and third, with 2:07 (1:06-3:39.2) minute. These data suggest a focus on the intermittent demand presented in combat phases with a special attention to the strike and ground technical-tactical skills; strength and conditioning coaches could emphasize the effort pause ratios for both standing and ground combat that mimic the requirements of MMA, especially during the third round.

A quality assurance audit: phase III trial of maximal androgen deprivation in prostate cancer (TROG 96.01).

PubMed

Steigler, A; Mameghan, H; Lamb, D; Joseph, D; Matthews, J; Franklin, I; Turner, S; Spry, N; Poulsen, M; North, J; Kovacev, O; Denham, J

2000-02-01

In 1997 the Trans-Tasman Radiation Oncology Group (TROG) performed a quality assurance (QA) audit of its phase III randomized clinical trial investigating the effectiveness of different durations of maximal androgen deprivation prior to and during definitive radiation therapy for locally advanced carcinoma of the prostate (TROG 96.01). The audit reviewed a total of 60 cases from 15 centres across Australia and New Zealand. In addition to verification of technical adherence to the protocol, the audit also incorporated a survey of centre planning techniques and a QA time/cost analysis. The present report builds on TROG's first technical audit conducted in 1996 for the phase III accelerated head and neck trial (TROG 91.01) and highlights the significant progress TROG has made in the interim period. The audit provides a strong validation of the results of the 96.01 trial, as well as valuable budgeting and treatment planning information for future trials. Overall improvements were detected in data quality and quantity, and in protocol compliance, with a reduction in the rate of unacceptable protocol violations from 10 to 4%. Audit design, staff education and increased data management resources were identified as the main contributing factors to these improvements. In addition, a budget estimate of $100 per patient has been proposed for conducting similar technical audits. The next major QA project to be undertaken by TROG during the period 1998-1999 is an intercentre dosimetry study. Trial funding and staff education have been targeted as the key major issues essential to the continued success and expansion of TROG's QA programme.

Evaluation of technical quality and periapical health of root-filled teeth by using cone-beam CT

PubMed Central

Bilge Gülsüm, NUR; Evren, OK; ALTUNSOY, Mustafa; AĞLARCI, Osman Sami; ÇOLAK, Mehmet; GÜNGÖR, Enes

2014-01-01

Objective This study aimed to assess the quality of root fillings, coronal restorations, complications of all root-filled teeth and their association with apical periodontitis (AP) detected by cone-beam computed tomography (CBCT) images from an adult Turkish subpopulation. Material and Methods The sample for this study consisted of 242 patients (aging from 15 to 72 years) with 522 endodontically treated teeth that were assessed for technical quality of the root canal filling and periapical status of the teeth. Additionally, the apical status of each root-filled tooth was assessed according to the gender, dental arch, tooth type and age classification, undetected canals, instrument fracture, root fracture, apical resorption, apical lesion, furcation lesion and type and quality of the coronal structure. Statistical analysis was performed using percentages and chi-square test. Results The success rate of the root canal treatment was of 54.4%. The success rates of adequate and inadequate root canal treatment were not significantly different (p>0.05). Apical periodontitis was found in 228 (45.6%) teeth treated for root canals. Higher prevalence of AP was found in patients aging from 20 to 29 years [64 (27%) teeth] and in anterior (canines and incisors) teeth [97 (41%) teeth]. Conclusions The technical quality of root canal filling performed by dental practitioners in a Turkish subpopulation was consistent with a high prevalence of AP. The probable reasons for this failure are multifactorial, and there may be a need for improved undergraduate education and postgraduate courses to improve the clinical skills of dental practitioners in endodontics. PMID:25591019

Randomised controlled trial to assess the effect of a Just-in-Time training on procedural performance: a proof-of-concept study to address procedural skill decay.

PubMed

Branzetti, Jeremy B; Adedipe, Adeyinka A; Gittinger, Matthew J; Rosenman, Elizabeth D; Brolliar, Sarah; Chipman, Anne K; Grand, James A; Fernandez, Rosemarie

2017-11-01

A subset of high-risk procedures present significant safety threats due to their (1) infrequent occurrence, (2) execution under time constraints and (3) immediate necessity for patient survival. A Just-in-Time (JIT) intervention could provide real-time bedside guidance to improve high-risk procedural performance and address procedural deficits associated with skill decay. To evaluate the impact of a novel JIT intervention on transvenous pacemaker (TVP) placement during a simulated patient event. This was a prospective, randomised controlled study to determine the effect of a JIT intervention on performance of TVP placement. Subjects included board-certified emergency medicine physicians from two hospitals. The JIT intervention consisted of a portable, bedside computer-based procedural adjunct. The primary outcome was performance during a simulated patient encounter requiring TVP placement, as assessed by trained raters using a technical skills checklist. Secondary outcomes included global performance ratings, time to TVP placement, number of critical omissions and System Usability Scale scores (intervention only). Groups were similar at baseline across all outcomes. Compared with the control group, the intervention group demonstrated statistically significant improvement in the technical checklist score (11.45 vs 23.44, p<0.001, Cohen's d effect size 4.64), the global rating scale (2.27 vs 4.54, p<0.001, Cohen's d effect size 3.76), and a statistically significant reduction in critical omissions (2.23 vs 0.68, p<0.001, Cohen's d effect size -1.86). The difference in time to procedural completion was not statistically significant between conditions (11.15 min vs 12.80 min, p=0.12, Cohen's d effect size 0.65). System Usability Scale scores demonstrated excellent usability. A JIT intervention improved procedure perfromance, suggesting a role for JIT interventions in rarely performed procedures. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Effect of education intervention on the quality and long-term outcomes of root canal treatment in general practice.

PubMed

Koch, M; Wolf, E; Tegelberg, Å; Petersson, K

2015-07-01

To compare the technical quality and long-term outcomes of root canal treatment by general practitioners of a Swedish Public Dental Service, before and after an endodontic education including Ni-Ti rotary technique (NiTiR). A random sample was compiled, comprising one root filled tooth from each of 830 patients, treated by 69 general practitioners participating in the education: 414 teeth root filled in 2002, pre-education, using primarily stainless steel instrumentation and filling by lateral compaction, and 416 teeth root filled post-education (2005), using mainly NiTiR and single-cone obturation. Follow-up radiographs taken in 2009 were evaluated alongside immediate post-filling radiographs from 2002 to 2005. The density and length of the root fillings were registered. Periapical status was assessed by the Periapical Index (PAI), using two definitions of disease: apical periodontitis (AP) (PAI 3 + 4 + 5) and definite AP (PAI 4 + 5). Tooth survival was registered. Root fillings pre- and post-education were compared using chi-square and Fisher's exact tests. Crude extraction rates per 100 years were calculated for comparison of tooth survival. Explanatory variables (type of tooth, root filling quality, periapical status, marginal bone loss, type and quality of coronal restoration) in relation to the dependent variable (AP at follow-up) were analysed by multivariable logistic regression. Follow-up data were available for 229 (55%) of teeth treated pre- and 288 (69%) treated post-education: both tooth survival (P < 0.001) and root filling quality were significantly higher (P < 0.001) in the latter. However, there was no corresponding improvement in periapical status. Both pre- and post-education, root fillings with definite AP on completion of treatment had significantly higher odds of AP or definite AP at follow-up. For teeth treated post-education, inadequate root filling quality was significantly associated with AP at follow-up. Despite a higher tooth survival rate and a significant improvement in technical quality of root fillings after the education, there was no corresponding improvement in periapical status. © 2014 International Endodontic Journal. Published by John Wiley & Sons Ltd.

Study of space shuttle orbiter system management computer function. Volume 1: Analysis, baseline design

NASA Technical Reports Server (NTRS)

1975-01-01

A system analysis of the shuttle orbiter baseline system management (SM) computer function is performed. This analysis results in an alternative SM design which is also described. The alternative design exhibits several improvements over the baseline, some of which are increased crew usability, improved flexibility, and improved growth potential. The analysis consists of two parts: an application assessment and an implementation assessment. The former is concerned with the SM user needs and design functional aspects. The latter is concerned with design flexibility, reliability, growth potential, and technical risk. The system analysis is supported by several topical investigations. These include: treatment of false alarms, treatment of off-line items, significant interface parameters, and a design evaluation checklist. An in-depth formulation of techniques, concepts, and guidelines for design of automated performance verification is discussed.

Performance Assessment Assistance Activities in the DOE Complex - 12325

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seitz, Roger R.; Phifer, Mark A.; Letourneau, Martin J.

The United States Department of Energy Office of Environmental Management (DOE-EM) has established a Performance Assessment Community of Practice (PA CoP) to foster the sharing of information among performance assessment (PA) and risk assessment practitioners, regulators and oversight personnel. The general intent is to contribute to continuous improvement in the consistency, technical adequacy and quality of implementation of PAs and risk assessments around the DOE Complex. The PA CoP activities have involved commercial disposal facilities and international participants to provide a global perspective. The PA CoP has also sponsored annual technical exchanges as a means to foster improved communication andmore » to share lessons learned from on-going modelling activities. The PA CoP encourages activities to provide programmatic and technical assistance in the form of sharing experience and lessons learned with practitioners during the development of PAs and risk assessments. This assistance complements DOE-EM reviews through the Low-Level Waste Disposal Facility Federal Review Group (LFRG) that are conducted after modelling efforts are completed. Such up-front assistance is providing additional value in terms of improving consistency and sharing of information. There has been a substantial increase in the amount of assistance being provided. The assistance has been well received by practitioners and regulators that have been involved. The paper highlights assistance and sharing of information that has been conducted in the last two years to support activities underway in support of proposed disposal facilities at Paducah, Portsmouth, and the Idaho National Laboratory and tank closure at Hanford. DOE-EM established the PA CoP to help improve the consistency and quality of implementation of modelling activities around the DOE Complex. The PA CoP has sponsored annual technical exchanges as a means to foster improved communication and to share lessons learned from ongoing modelling activities. Practitioners; project managers; oversight personnel; and regulators from United States and international facilities have participated in the three technical exchanges that have been held to date. At the working level, the PA CoP has sponsored technical assistance in support of modelling activities that are currently underway. The assistance concept provides a means to share specific experience, good practices, and lessons learned on topics of interest at a given site while the modelling is being conducted. Such up-front assistance complements the sharing of information that occurs via regular LFRG meetings and independent LFRG reviews that are conducted when the modelling effort is completed. Examples from assistance activities that have been conducted at Idaho, Paducah, Portsmouth and Hanford were highlighted in this paper. There were differences in the types of assistance provided at each site. In some cases the assistance was focused on technical support for the practitioners and management responsible for the development of the PAs. At other sites, the assistance included working with the developers and regulators/stakeholders involved in the process to help with reaching consensus on critical assumptions. Such interactions have proven to be very effective to help all parties get a chance to discuss their perspectives and better understand the different points of view. In all cases, the assistance was used as a means to share broader perspectives, experiences and lessons learned with personnel engaged in a modelling activities at a given site. The combination of technical exchanges and targeted technical assistance has provided additional means to encourage the sharing of information around the DOE Complex and globally. Feedback from practitioners, oversight personnel, regulators and stakeholders that have been involved has been overwhelmingly positive. It is believed that such sharing of information and experiences is contributing to continuous improvement in the consistency, technical adequacy, and quality of modelling activities. Although different approaches are still being used, there is an improvement in the awareness of lessons learned and implementation of practices that have proven to be effective. (authors)« less

Interdisciplinary Relationships in Technical Education: The CORD Perspective.

ERIC Educational Resources Information Center

Hull, Daniel M.

1990-01-01

The director of the Center for Occupational Research and Development (CORD) suggests areas in a technical curriculum that could be improved using an interdisciplinary approach: (1) systems; (2) the electromechanical core; (3) the mathematics/science base; (4) computers; and (5) interpersonal/communication skills. (Author)

Adding Realism to Technical Drafting Programs

ERIC Educational Resources Information Center

Weaver, Gerald L.

1976-01-01

Suggestions for improved, relevant technical drafting programs are presented: (1) making realistic assignments, (2) viewing real projects, (3) duplicating industrial projects, (4) practicing lettering, (5) conducting research, (6) engaging in teamwork, (7) adapting to change, (8) learning to meet deadlines, and (9) stressing the importance of…

Assessment Program Technical Progress Report, 1996-1997.

ERIC Educational Resources Information Center

McCown, Laurie; Fanning, Erin; Eickmeyer, Barbara

Coconino Community College (CCC) annually assesses its institutional effectiveness to demonstrate its commitment to improving programs and services to students. The 1996-97 Assessment Program Technical Progress Report records the assessment and institutional activities enacted during the academic year, detailing the assessment model, timelines,…

[A technical modification of the use of Dwyer's equipment].

PubMed

Carlioz, H; Damsin, J P

1991-01-01

Dwyer's technique for correction and anterior fusion of the spine was improved by using lockers at the level of each screw. So, like with the Zielke's technic this procedure allowed a global progressive and controllable correction and a real derotation of the spine.

78 FR 20120 - Cooperative Research and Development Agreement: Joint Technical Demonstration of Tactical Data...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-03

... Development Agreement: Joint Technical Demonstration of Tactical Data Link Range Enhancement Software AGENCY... (TDL) range enhancement software technologies to improve operational effectiveness and communications... Range Enhancement Software Technologies, U.S. Coast Guard Research and Development Center, 1 Chelsea...

Technical aspects of neurostimulation: Focus on equipment, electric field modeling, and stimulation protocols.

PubMed

Klooster, D C W; de Louw, A J A; Aldenkamp, A P; Besseling, R M H; Mestrom, R M C; Carrette, S; Zinger, S; Bergmans, J W M; Mess, W H; Vonck, K; Carrette, E; Breuer, L E M; Bernas, A; Tijhuis, A G; Boon, P

2016-06-01

Neuromodulation is a field of science, medicine, and bioengineering that encompasses implantable and non-implantable technologies for the purpose of improving quality of life and functioning of humans. Brain neuromodulation involves different neurostimulation techniques: transcranial magnetic stimulation (TMS), transcranial direct current stimulation (tDCS), vagus nerve stimulation (VNS), and deep brain stimulation (DBS), which are being used both to study their effects on cognitive brain functions and to treat neuropsychiatric disorders. The mechanisms of action of neurostimulation remain incompletely understood. Insight into the technical basis of neurostimulation might be a first step towards a more profound understanding of these mechanisms, which might lead to improved clinical outcome and therapeutic potential. This review provides an overview of the technical basis of neurostimulation focusing on the equipment, the present understanding of induced electric fields, and the stimulation protocols. The review is written from a technical perspective aimed at supporting the use of neurostimulation in clinical practice. Copyright © 2016 Elsevier Ltd. All rights reserved.

Atmospheric/Space Environment Support Lessons Learned Regarding Aerospace Vehicle Design and Operations

NASA Technical Reports Server (NTRS)

Vaughan, William W.; Anderson, B. Jeffrey

2005-01-01

In modern government and aerospace industry institutions the necessity of controlling current year costs often leads to high mobility in the technical workforce, "one-deep" technical capabilities, and minimal mentoring for young engineers. Thus, formal recording, use, and teaching of lessons learned are especially important in the maintenance and improvement of current knowledge and development of new technologies, regardless of the discipline area. Within the NASA Technical Standards Program Website http://standards.nasa.gov there is a menu item entitled "Lessons Learned/Best Practices". It contains links to a large number of engineering and technical disciplines related data sets that contain a wealth of lessons learned information based on past experiences. This paper has provided a small sample of lessons learned relative to the atmospheric and space environment. There are many more whose subsequent applications have improved our knowledge of the atmosphere and space environment, and the application of this knowledge to the engineering and operations for a variety of aerospace programs.

E-KIT: An Electronic-Knowledge Information Tool for Organizing Site Information and Improving Technical Communication with Stakeholders - 13082

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kautsky, Mark; Findlay, Richard C.; Hodges, Rex A.

2013-07-01

Managing technical references for projects that have long histories is hampered by the large collection of documents, each of which might contain discrete pieces of information relevant to the site conceptual model. A database application has been designed to improve the efficiency of retrieving technical information for a project. Although many databases are currently used for accessing analytical and geo-referenced data, applications designed specifically to manage technical reference material for projects are scarce. Retrieving site data from the array of available references becomes an increasingly inefficient use of labor. The electronic-Knowledge Information Tool (e-KIT) is designed as a project-level resourcemore » to access and communicate technical information. The e-KIT is a living tool that grows as new information becomes available, and its value to the project increases as the volume of site information increases. Having all references assembled in one location with complete reference citations and links to elements of the site conceptual model offers a way to enhance communication with outside groups. The published and unpublished references are incorporated into the e-KIT, while the compendium of references serves as a complete bibliography for the project. (authors)« less

A strawman SLR program plan for the 1990s

NASA Technical Reports Server (NTRS)

Degnan, John J.

1994-01-01

A series of programmatic and technical goals for the satellite laser ranging (SLR) network are presented. They are: (1) standardize the performance of the global SLR network; (2) improve the geographic distribution of stations; (3) reduce costs of field operations and data processing; (4) expand the 24 hour temporal coverage to better serve the growing constellation of satellites; (5) improve absolute range accuracy to 2 mm at key stations; (6) improve satellite force, radiative propagation, and station motion models and investigate alternative geodetic analysis techniques; (7) support technical intercomparison and the Terrestrial Reference Frame through global collocations; (8) investigate potential synergisms between GPS and SLR.

Web-based management of diabetes through glucose uploads: has the time come for telemedicine?

PubMed

Azar, Madona; Gabbay, Robert

2009-01-01

This review focuses on the burgeoning use of web-based systems allowing patient-initiated glucometer uploads to facilitate provider treatment intensification. Studies in type 1 diabetes tended to show equivalent HbA1c improvements in both intervention and control groups without statistically significant difference. In contrast, type 2 patients seemed to do better than controls with significant differences in HbA1c. Patients were the beneficiaries of web-based diabetes management both through savings in time and cost. Major obstacles to wider implementation are patient computer skills, adherence to the technology, architectural and technical design, and the need to reimburse providers for their care.

Technical evaluation of Virtual Touch™ tissue quantification and elastography in benign and malignant breast tumors

PubMed Central

JIANG, QUAN; ZHANG, YUAN; CHEN, JIAN; ZHANG, YUN-XIAO; HE, ZHU

2014-01-01

The aim of this study was to investigate the diagnostic value of the Virtual Touch™ tissue quantification (VTQ) and elastosonography technologies in benign and malignant breast tumors. Routine preoperative ultrasound, elastosonography and VTQ examinations were performed on 86 patients with breast lesions. The elastosonography score and VTQ speed grouping of each lesion were measured and compared with the pathological findings. The difference in the elastosonography score between the benign and malignant breast tumors was statistically significant (P<0.05). The detection rate for an elastosonography score of 1–3 points in benign tumors was 68.09% and that for an elastosonography score of 4–5 points in malignant tumors was 82.05%. The difference in VTQ speed values between the benign and malignant tumors was also statistically significant (P<0.05). In addition, the diagnostic accuracy of conventional ultrasound, elastosonography, VTQ technology and the combined methods showed statistically significant differences (P<0.05). The use of the three technologies in combination significantly improved the diagnostic accuracy to 91.86%. In conclusion, the combination of conventional ultrasound, elastosonography and VTQ technology can significantly improve accuracy in the diagnosis of breast cancer. PMID:25187797

Refining each process step to accelerate the development of biorefineries

DOE PAGES

Chandra, Richard P.; Ragauskas, Art J.

2016-06-21

Research over the past decade has been mainly focused on overcoming hurdles in the pretreatment, enzymatic hydrolysis, and fermentation steps of biochemical processing. Pretreatments have improved significantly in their ability to fractionate and recover the cellulose, hemicellulose, and lignin components of biomass while producing substrates containing carbohydrates that can be easily broken down by hydrolytic enzymes. There is a rapid movement towards pretreatment processes that incorporate mechanical treatments that make use of existing infrastructure in the pulp and paper industry, which has experienced a downturn in its traditional markets. Enzyme performance has also made great strides with breakthrough developments inmore » nonhydrolytic protein components, such as lytic polysaccharide monooxygenases, as well as the improvement of enzyme cocktails.The fermentability of pretreated and hydrolyzed sugar streams has been improved through strategies such as the use of reducing agents for detoxification, strain selection, and strain improvements. Although significant progress has been made, tremendous challenges still remain to advance each step of biochemical conversion, especially when processing woody biomass. In addition to technical and scale-up issues within each step of the bioconversion process, biomass feedstock supply and logistics challenges still remain at the forefront of biorefinery research.« less

Technical efficiency in milk production in underdeveloped production environment of India*.

PubMed

Bardhan, Dwaipayan; Sharma, Murari Lal

2013-12-01

The study was undertaken in Kumaon division of Uttarakhand state of India with the objective of estimating technical efficiency in milk production across different herd-size category households and factors influencing it. Total of 60 farm households having representation from different herd-size categories drawn from six randomly selected villages of plain and hilly regions of the division constituted the ultimate sampling units of the study. Stochastic frontier production function analysis was used to estimate the technical efficiency in milk production. Multivariate regression equations were fitted taking technical efficiency index as the regressand to identify the factors significantly influencing technical efficiency in milk production. The study revealed that variation in output across farms in the study area was due to difference in their technical efficiency levels. However, it was interesting to note that smallholder producers were more technically efficient in milk production than their larger counterparts, especially in the plains. Apart from herd size, intensity of market participation had significant and positive impact on technical efficiency in the plains. This provides definite indication that increasing the level of commercialization of dairy farms would have beneficial impact on their production efficiency.

USSR Report Engineering and Equipment.

DTIC Science & Technology

1987-05-04

Korenev , et al. ; ENERGETICHESKOYE STROITELSTVO, No 7, Jul 86) 33 Improving Fire Protection of Cables in Electric Power Plants (S.Ye. Korshunov...Russian No 7, Jul 86 pp 32-33 {Article by V.D. Likhachev, candidate of technical sciences, K.I. Korenev , candidate of technical sciences, K.I. Chikvaidze

76 FR 50462 - Applications for New Awards; Technical Assistance and Dissemination To Improve Services and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-15

...-recommendations-for-serving-adolescent-newcomers . Fuchs, D. & Fuchs, L.S. (2006). New directions in research...). Gay, G. (2000). Culturally responsive teaching: Theory, research, and practice. New York: Teachers... DEPARTMENT OF EDUCATION Applications for New Awards; Technical Assistance and Dissemination To...

77 FR 46658 - Proposed Priority; Technical Assistance To Improve State Data Capacity-National Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-06

... percent of youth with individualized education programs (IEPs) graduating with a regular high school... 100,000 schools through EDFacts. \\4\\ Education Department General Administrative Regulations (EDGAR... Department programs (e.g., Consolidated State Performance Report under the Elementary and Secondary Education...

Our built and natural environments : a technical review of the interactions between land use, transportation, and environmental quality

DOT National Transportation Integrated Search

2001-01-01

In recent years interest has grown in Smart Growth as a mechanism for improving environmental quality. In Our Built and Natural Environments, the U.S. Environmental Protection Agency (EPA) summarizes technical research on the relationship between the...

76 FR 23970 - Notice of Proposed Changes to Section IV of the Virginia State Technical Guide

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... DEPARTMENT OF AGRICULTURE Natural Resources Conservation Service Notice of Proposed Changes to Section IV of the Virginia State Technical Guide AGENCY: Natural Resources Conservation Service (NRCS), U..., 395, Stream Habitat Improvement and Management, 422, Hedgerow Planting, 643, Restoration and...

Amplification in Technical Manuals: Theory and Practice.

ERIC Educational Resources Information Center

Killingsworth, M. Jimmie; And Others

1989-01-01

Examines how amplification (rhetorical techniques by which discourse is extended to enhance its appeal and information value) tends to increase and improve the coverage, rationale, warnings, behavioral alternatives, examples, previews, and general emphasis of technical manuals. Shows how classical and modern rhetorical theories can be applied to…

Materials Technical Team Roadmap

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2013-08-01

Roadmap identifying the efforts of the Materials Technical Team (MTT) to focus primarily on reducing the mass of structural systems such as the body and chassis in light-duty vehicles (including passenger cars and light trucks) which enables improved vehicle efficiency regardless of the vehicle size or propulsion system employed.

7 CFR 2003.18 - Functional organization of RHS.

Code of Federal Regulations, 2014 CFR

2014-01-01

... and 504 Rural Housing direct and guaranteed loan and grant programs, Rural Housing and Self-Help Site loans, the Self-Help Technical Assistance grant program, Housing Application Packaging and Technical and Supervisory Assistance grants, and Home Improvement and Repaid loans and grants. The office directs the...

7 CFR 2003.18 - Functional organization of RHS.

Code of Federal Regulations, 2012 CFR

2012-01-01

... and 504 Rural Housing direct and guaranteed loan and grant programs, Rural Housing and Self-Help Site loans, the Self-Help Technical Assistance grant program, Housing Application Packaging and Technical and Supervisory Assistance grants, and Home Improvement and Repaid loans and grants. The office directs the...

7 CFR 2003.18 - Functional organization of RHS.

Code of Federal Regulations, 2013 CFR

2013-01-01

... and 504 Rural Housing direct and guaranteed loan and grant programs, Rural Housing and Self-Help Site loans, the Self-Help Technical Assistance grant program, Housing Application Packaging and Technical and Supervisory Assistance grants, and Home Improvement and Repaid loans and grants. The office directs the...

7 CFR 2003.18 - Functional organization of RHS.

Code of Federal Regulations, 2011 CFR

2011-01-01

... and 504 Rural Housing direct and guaranteed loan and grant programs, Rural Housing and Self-Help Site loans, the Self-Help Technical Assistance grant program, Housing Application Packaging and Technical and Supervisory Assistance grants, and Home Improvement and Repaid loans and grants. The office directs the...

Vocational Outreach Involving Community Exchange (VOICE). Final Report.

ERIC Educational Resources Information Center

Huckabee, Johnni

A Jonesboro, Arkansas project was designed and implemented to increase the awareness of vocational education, increase community support and involvement in vocational education, and establish improved communication in the vocational-technical education field. Interaction between the vocational-technical school and the local school community was a…

The ABCs of Writing a Technical Glossary.

ERIC Educational Resources Information Center

Gray, Evie; Ingram, William; Bodson, Dennis

1998-01-01

Explains format, style rules, and lexicographic conventions that improve clarity and precision in a technical glossary. Discusses general rules, rules of style, rules of grammar and syntax, and rules for figures. Describes the computer display techniques and file management system used to develop such a glossary. (SR)

Research on artistic gymnastics training guidance model

NASA Astrophysics Data System (ADS)

Luo, Lin; Sun, Xianzhong

2017-04-01

Rhythmic gymnastics training guidance model, taking into consideration the features of artistic gymnastics training, is put forward to help gymnasts identify their deficiencies and unskilled technical movements and improve their training effects. The model is built on the foundation of both physical quality indicator model and artistic gymnastics training indicator model. Physical quality indicator model composed of bodily factor, flexibility-strength factor and speed-dexterity factor delivers an objective evaluation with reference to basic sport testing data. Training indicator model, based on physical fitness indicator, helps analyze the technical movements, through which the impact from each bodily factor on technical movements is revealed. AG training guidance model, in further combination with actual training data and in comparison with the data shown in the training indicator model, helps identify the problems in trainings, and thus improve the training effect. These three models when in combined use and in comparison with historical model data can check and verify the improvement in training effect over a certain period of time.

Technical editing and the effective communication of scientific results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pieper, G.W.; Picologlou, S.M.

1996-05-01

Communication of scientific results--whether for professional journals, poster sessions, oral presentations, or the popular press--is an essential part of any scientific investigation. The technical editor plays an important rolein ensuring that scientists express their results correctly and effectively. Technical editing comprises far more than simple proofreading. The editor`s tasks may range from restructuring whole parpagrphs and suggesting improved graphical aids to writing abstracts and preparing first drafts of proposals. The technical editor works closely with scientists to present complex ideas to differentaudiences, including fellow scentists, funding agencies, and the general public. New computer technologyhas also involved the technical editor notmore » only with on-line editing but also with preparing CD ROMs and World Wide Web pages.« less

DARPA-NRL Laser Program Annual Technical Report to Defense Advanced Research Projects Agency

DTIC Science & Technology

1980-04-30

sorption could be removed or significantly reduced then the output power and efficiency of the XeCl laser could be further improved. Figure 1 plots...to 30 nm closer to the visible than the experimentally observed ab- sorption peak for Xe2+ (Fig. 3). Figure 3 is a plot of the measured absorption in...radiation in o00 argon-xenon and neon-xenon mixtures. A reduction in ab- No:X: HCt 41. sorption at the laser wavelength was observed when small r’ NEN

Simulation and Shoulder Dystocia.

PubMed

Shaddeau, Angela K; Deering, Shad

2016-12-01

Shoulder dystocia is an unpredictable obstetric emergency that requires prompt interventions to ensure optimal outcomes. Proper technique is important but difficult to train given the urgent and critical clinical situation. Simulation training for shoulder dystocia allows providers at all levels to practice technical and teamwork skills in a no-risk environment. Programs utilizing simulation training for this emergency have consistently demonstrated improved performance both during practice drills and in actual patients with significantly decreased risks of fetal injury. Given the evidence, simulation training for shoulder dystocia should be conducted at all institutions that provide delivery services.

Optimal time for initiating extracorporeal membrane oxygenation.

PubMed

Haile, Dawit T; Schears, Gregory J

2009-09-01

The technical evolution of extracorporeal membrane oxygenation (ECMO) coincides with the vast improvement in intensive care medicine of the past 4 decades. Extracorporeal circulatory technology substitutes for acutely failed cardiac or pulmonary function until these organs regain sustainable function through goal-oriented intensive care practice. The technology has been validated to improve survival in select patients who would otherwise have 100% mortality. This is by far the most complex life-sustaining technology employed and thus can contribute significant risks such that the decision to institute ECMO requires prompt risk and benefit analysis. Delaying the institution of ECMO may cause irreversible pulmonary and cardiac injuries in addition to other organs. Therefore, the optimal time of initiating ECMO support is crucial to the survival of a critically ill patient.

Glucose Biosensors: An Overview of Use in Clinical Practice

PubMed Central

Yoo, Eun-Hyung; Lee, Soo-Youn

2010-01-01

Blood glucose monitoring has been established as a valuable tool in the management of diabetes. Since maintaining normal blood glucose levels is recommended, a series of suitable glucose biosensors have been developed. During the last 50 years, glucose biosensor technology including point-of-care devices, continuous glucose monitoring systems and noninvasive glucose monitoring systems has been significantly improved. However, there continues to be several challenges related to the achievement of accurate and reliable glucose monitoring. Further technical improvements in glucose biosensors, standardization of the analytical goals for their performance, and continuously assessing and training lay users are required. This article reviews the brief history, basic principles, analytical performance, and the present status of glucose biosensors in the clinical practice. PMID:22399892

New scientific results with SpIOMM: a testbed for CFHT's imaging Fourier transform spectrometer SITELLE

NASA Astrophysics Data System (ADS)

Drissen, L.; Alarie, A.; Martin, T.; Lagrois, D.; Rousseau-Nepton, L.; Bilodeau, A.; Robert, C.; Joncas, G.; Iglesias-Páramo, J.

2012-09-01

We present new data obtained with SpIOMM, the imaging Fourier transform spectrometer attached to the 1.6-m telescope of the Observatoire du Mont-Megantic in Québec. Recent technical and data reduction improvements have significantly increased SpIOMM's capabilities to observe fainter objects or weaker nebular lines, as well as continuum sources and absorption lines, and to increase its modulation efficiency in the near ultraviolet. To illustrate these improvements, we present data on the supernova remnant Cas A, planetary nebulae M27 and M97, the Wolf-Rayet ring nebula M1-67, spiral galaxies M63 and NGC 3344, as well as the interacting pair of galaxies Arp 84.

Computer science: Key to a space program renaissance. The 1981 NASA/ASEE summer study on the use of computer science and technology in NASA. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Freitas, R. A., Jr. (Editor); Carlson, P. A. (Editor)

1983-01-01

Adoption of an aggressive computer science research and technology program within NASA will: (1) enable new mission capabilities such as autonomous spacecraft, reliability and self-repair, and low-bandwidth intelligent Earth sensing; (2) lower manpower requirements, especially in the areas of Space Shuttle operations, by making fuller use of control center automation, technical support, and internal utilization of state-of-the-art computer techniques; (3) reduce project costs via improved software verification, software engineering, enhanced scientist/engineer productivity, and increased managerial effectiveness; and (4) significantly improve internal operations within NASA with electronic mail, managerial computer aids, an automated bureaucracy and uniform program operating plans.

Progress toward a new beam measurement of the neutron lifetime

NASA Astrophysics Data System (ADS)

Hoogerheide, Shannon Fogwell

2016-09-01

Neutron beta decay is the simplest example of nuclear beta decay. A precise value of the neutron lifetime is important for consistency tests of the Standard Model and Big Bang Nucleosysnthesis models. The beam neutron lifetime method requires the absolute counting of the decay protons in a neutron beam of precisely known flux. Recent work has resulted in improvements in both the neutron and proton detection systems that should permit a significant reduction in systematic uncertainties. A new measurement of the neutron lifetime using the beam method will be performed at the National Institute of Standards and Technology Center for Neutron Research. The projected uncertainty of this new measurement is 1 s. An overview of the measurement and the technical improvements will be discussed.

Health Facility Graduation from Donor-Supported Intensive Technical Assistance and Associated Factors in Zambia.

PubMed

Koni, Phillip; Chishinga, Nathaniel; Nyirenda, Lameck; Kasonde, Prisca; Nsakanya, Richard; Welsh, Michael

2015-01-01

The FHI360-led Zambia Prevention Care and Treatment partnership II (ZPCT II) with funding from United States Agency for International Development, supports the Zambian Ministry of Health in scaling up HIV/AIDS services. To improve the quality of HIV/AIDS services, ZPCT II provides technical assistance until desired standards are met and districts are weaned-off intensive technical support, a process referred to as district graduation. This study describes the graduation process and determines performance domains associated with district graduation. Data were collected from 275 health facilities in 39 districts in 5 provinces of Zambia between 2008 and 2012. Performance in technical capacity, commodity management, data management and human resources domains were assessed in the following services areas: HIV counselling and testing and prevention of mother to child transmission, antiretroviral therapy/clinical care, pharmacy and laboratory. The overall mean percentage score was calculated by obtaining the mean of mean percentage scores for the four domains. Logistic regression models were used to obtain odds ratios (OR) and 95% confidence intervals (CI) for the domain mean percentage scores in graduated versus non-graduated districts; according to rural-urban, and province strata. 24 districts out of 39 graduated from intensive donor supported technical assistance while 15 districts did not graduate. The overall mean percentage score for all four domains was statistically significantly higher in graduated than non-graduated districts (93.2% versus 91.2%, OR = 1.34, 95%CI:1.20-1.49); including rural settings (92.4% versus 89.4%, OR = 1.43,95%CI:1.24-1.65). The mean percentage score in human resource domain was statistically significantly higher in graduated than non-graduated districts (93.6% versus 71.6%, OR = 5.81, 95%CI: 4.29-7.86) and in both rural and urban settings. QA/QI tools can be used to assess performance at health facilities and determine readiness for district graduation. Human resources management domain was found to be an important factor associated with district graduation.

Health Facility Graduation from Donor-Supported Intensive Technical Assistance and Associated Factors in Zambia

PubMed Central

Koni, Phillip; Chishinga, Nathaniel; Nyirenda, Lameck; Kasonde, Prisca; Nsakanya, Richard; Welsh, Michael

2015-01-01

Introduction The FHI360-led Zambia Prevention Care and Treatment partnership II (ZPCT II) with funding from United States Agency for International Development, supports the Zambian Ministry of Health in scaling up HIV/AIDS services. To improve the quality of HIV/AIDS services, ZPCT II provides technical assistance until desired standards are met and districts are weaned-off intensive technical support, a process referred to as district graduation. This study describes the graduation process and determines performance domains associated with district graduation. Methods Data were collected from 275 health facilities in 39 districts in 5 provinces of Zambia between 2008 and 2012. Performance in technical capacity, commodity management, data management and human resources domains were assessed in the following services areas: HIV counselling and testing and prevention of mother to child transmission, antiretroviral therapy/clinical care, pharmacy and laboratory. The overall mean percentage score was calculated by obtaining the mean of mean percentage scores for the four domains. Logistic regression models were used to obtain odds ratios (OR) and 95% confidence intervals (CI) for the domain mean percentage scores in graduated versus non-graduated districts; according to rural-urban, and province strata. Results 24 districts out of 39 graduated from intensive donor supported technical assistance while 15 districts did not graduate. The overall mean percentage score for all four domains was statistically significantly higher in graduated than non-graduated districts (93.2% versus 91.2%, OR = 1.34, 95%CI:1.20–1.49); including rural settings (92.4% versus 89.4%, OR = 1.43,95%CI:1.24–1.65). The mean percentage score in human resource domain was statistically significantly higher in graduated than non-graduated districts (93.6% versus 71.6%, OR = 5.81, 95%CI: 4.29–7.86) and in both rural and urban settings. Conclusions QA/QI tools can be used to assess performance at health facilities and determine readiness for district graduation. Human resources management domain was found to be an important factor associated with district graduation. PMID:26098555

Understanding situation awareness and its importance in patient safety.

PubMed

Gluyas, Heather; Harris, Sarah-Jane

2016-04-20

Situation awareness describes an individual's perception, comprehension and subsequent projection of what is going on in the environment around them. The concept of situation awareness sits within the group of non-technical skills that include teamwork, communication and managing hierarchical lines of communication. The importance of non-technical skills has been recognised in safety-critical industries such as aviation, the military, nuclear, and oil and gas. However, health care has been slow to embrace the role of non-technical skills such as situation awareness in improving outcomes and minimising the risk of error. This article explores the concept of situation awareness and the cognitive processes involved in maintaining it. In addition, factors that lead to a loss of situation awareness and strategies to improve situation awareness are discussed.

Image formation in diffusion MRI: A review of recent technical developments

PubMed Central

Miller, Karla L.

2017-01-01

Diffusion magnetic resonance imaging (MRI) is a standard imaging tool in clinical neurology, and is becoming increasingly important for neuroscience studies due to its ability to depict complex neuroanatomy (eg, white matter connectivity). Single‐shot echo‐planar imaging is currently the predominant formation method for diffusion MRI, but suffers from blurring, distortion, and low spatial resolution. A number of methods have been proposed to address these limitations and improve diffusion MRI acquisition. Here, the recent technical developments for image formation in diffusion MRI are reviewed. We discuss three areas of advance in diffusion MRI: improving image fidelity, accelerating acquisition, and increasing the signal‐to‐noise ratio. Level of Evidence: 5 Technical Efficacy: Stage 1 J. MAGN. RESON. IMAGING 2017;46:646–662 PMID:28194821

Measuring efficiency of cotton cultivation in Pakistan: a restricted production frontier study.

PubMed

Watto, Muhammad Arif; Mugera, Amin

2014-11-01

Massive groundwater pumping for irrigation has started lowering water tables rapidly in different regions of Pakistan. Declining water tables have thus prompted research efforts to improve agricultural productivity and efficiency to make efficient use of scarce water resources. This study employs a restricted stochastic production frontier to estimate the level of, and factors affecting, technical efficiency of groundwater-irrigated cotton farms in the Punjab province of Pakistan. The mean technical efficiency estimates indicate substantial technical inefficiencies among cotton growers. On average, tube-well owners and water buyers can potentially increase cotton production by 19% and 28%, respectively, without increasing the existing input level. The most influential factors affecting technical efficiency positively are the use of improved quality seed, consultation with extension field staff and farmers' perceptions concerning the availability of groundwater resources for irrigation in the future. This study proposes that adopting improved seed for new cotton varieties and providing better extension services regarding cotton production technology would help to achieve higher efficiency in cotton farming. Within the context of falling water tables, educating farmers about the actual crop water requirements and guiding them about groundwater resource availability may also help to achieve higher efficiencies. © 2014 Society of Chemical Industry. © 2014 Society of Chemical Industry.

Teaching Cardiac Examination Skills

PubMed Central

Smith, Christopher A; Hart, Avery S; Sadowski, Laura S; Riddle, Janet; Evans, Arthur T; Clarke, Peter M; Ganschow, Pamela S; Mason, Ellen; Sequeira, Winston; Wang, Yue

2006-01-01

OBJECTIVE To determine if structured teaching of bedside cardiac examination skills improves medical residents' examination technique and their identification of key clinical findings. DESIGN Firm-based single-blinded controlled trial. SETTING Inpatient service at a university-affiliated public teaching hospital. PARTICIPANTS Eighty Internal Medicine residents. METHODS The study assessed 2 intervention groups that received 3-hour bedside teaching sessions during their 4-week rotation using either: (1) a traditional teaching method, “demonstration and practice” (DP) (n=26) or (2) an innovative method, “collaborative discovery” (CD) (n=24). The control group received their usual ward teaching sessions (n=25). The main outcome measures were scores on examination technique and correct identification of key clinical findings on an objective structured clinical examination (OSCE). RESULTS All 3 groups had similar scores for both their examination technique and identification of key findings in the preintervention OSCE. After teaching, both intervention groups significantly improved their technical examination skills compared with the control group. The increase was 10% (95% confidence interval [CI] 4% to 17%) for CD versus control and 12% (95% CI 6% to 19%) for DP versus control (both P<.005) equivalent to an additional 3 to 4 examination skills being correctly performed. Improvement in key findings was limited to a 5% (95% CI 2% to 9%) increase for the CD teaching method, CD versus control P=.046, equivalent to the identification of an additional 2 key clinical findings. CONCLUSIONS Both programs of bedside teaching increase the technical examination skills of residents but improvements in the identification of key clinical findings were modest and only demonstrated with a new method of teaching. PMID:16423116

Training situational awareness to reduce surgical errors in the operating room.

PubMed

Graafland, M; Schraagen, J M C; Boermeester, M A; Bemelman, W A; Schijven, M P

2015-01-01

Surgical errors result from faulty decision-making, misperceptions and the application of suboptimal problem-solving strategies, just as often as they result from technical failure. To date, surgical training curricula have focused mainly on the acquisition of technical skills. The aim of this review was to assess the validity of methods for improving situational awareness in the surgical theatre. A search was conducted in PubMed, Embase, the Cochrane Library and PsycINFO using predefined inclusion criteria, up to June 2014. All study types were considered eligible. The primary endpoint was validity for improving situational awareness in the surgical theatre at individual or team level. Nine articles were considered eligible. These evaluated surgical team crisis training in simulated environments for minimally invasive surgery (4) and open surgery (3), and training courses focused at training non-technical skills (2). Two studies showed that simulation-based surgical team crisis training has construct validity for assessing situational awareness in surgical trainees in minimally invasive surgery. None of the studies showed effectiveness of surgical crisis training on situational awareness in open surgery, whereas one showed face validity of a 2-day non-technical skills training course. To improve safety in the operating theatre, more attention to situational awareness is needed in surgical training. Few structured curricula have been developed and validation research remains limited. Strategies to improve situational awareness can be adopted from other industries. © 2014 BJS Society Ltd. Published by John Wiley & Sons Ltd.

Refining scientific writing skills with feedback that works for students and instructors

NASA Astrophysics Data System (ADS)

Kiani, Leily S.; Menke, Carrie

2015-10-01

Evaluation of student learning through assessment of communication skills is a generally important component of undergraduate education and particularly so for promotion of interdisciplinary research conducted by future scientists. To better build these skills we aim to quantify the effectiveness of feedback on student writing of technical reports in an upper-division physics lab course. In one implementation, feedback utilization - in the form of observing commented technical reports, attending office hours or emailing rough drafts of their reports was monitored then correlated with improvement in student writing. The improvement in student writing is quantified as the single-student normalized gain. A slight positive relationship was found between the number of times a student utilized feedback and the improvement in student writing. A subsequent study involved correlation of two complimentary assessments of student work. In the first assessment students received consistent feedback throughout the semester on all sections of a technical report in the form of highlighted bullet points in a detailed rubric. In the second assessment method students received varying amounts of feedback for each section of the technical paper throughout the semester with a focus on one section each week and follow-up feedback on previously covered sections. This approach provides focused feedback that can be scalable to larger classes. The number of highlighted bullet points in the rubric clearly decreases as a function of the focused feedback implementation. From this we conclude that student writing improves with the focused feedback method.

Techno-socio-economic analysis of losses in capture fishery: a case study in Pelabuhan Ratu, Sukabumi, West Java Province

NASA Astrophysics Data System (ADS)

Nurhayati, A.; Purnomo, A. H.

2018-03-01

This research was aimed at analyzing factors influencing capture fisheries losses, focusing on technical, social and economic aspects at Pelabuhan Ratu. A case study was undertaken, through a survey involving 40 respondents. These respondents represented groups of fishers, collectors, middlemen, processors and consumers. The questions delivered in the survey was adapted from the Exploratory Fish Loss Assessment Method (EFLAM). Based on this research, the fish loss was detected in Palabuhan Ratu, which amounted to 4.25 % at the fisher level and 5.12 % in the following supply chains, due to some factors. It was found that among the technical factors, the most influential ones were handling of landed fish, fish sortation, fish size, fish shelf life and season. Among economic aspect, factors with the most significant influence were fish price fluctuation and price level; meanwhile, among the social factors, those that had the most significant influence was the revenue distribution system. Based on this, the relevant policy implication of this research was the need for effective programs which covers the development of cold chain and distribution facilities and infrastructure, and an improvement in skills and knowledge of fish derivative product processors.

Changing perceptions of United States natural-gas resources as shown by successive U. S. Department of the Interior assessments

USGS Publications Warehouse

Schmoker, James W.; Dyman, Thaddeus S.

2001-01-01

Trends in four successive estimates of United States technically recoverable natural gas resources are examined in this report. The effective dates of these assessments were January 1 of 1975, 1980, 1987, and 1994. The 1994 estimate of the U.S. total gas endowment increased significantly over the previous three estimates, indicating that the technically recoverable endowment of gas is not an absolute volume, but rather is a quantity that can increase through time in response to advances in technology and in geologic understanding. Much of this increase was in the category of reserve growth. Reserve growth refers to additions to the estimated ultimate recovery of fields that typically occur as discovered fields are developed and produced. The potential for U.S. reserve growth, rather than being rapidly used up, appears to be sustainable for many years by intensive engineering efforts coupled with improving technology. Potential additions to reserves in continuous (unconventional) accumulations also represent a type of reserve growth, and were estimated (for the first time) in the 1994 assessment at 358 trillion cubic feet of gas. This resource category provides a significant new contribution to the estimated U.S. total gas endowment.

Space life and biomedical sciences in support of the global exploration roadmap and societal development

NASA Astrophysics Data System (ADS)

Evetts, S. N.

2014-08-01

The human exploration of space is pushing the boundaries of what is technically feasible. The space industry is preparing for the New Space era, the momentum for which will emanate from the commercial human spaceflight sector, and will be buttressed by international solar system exploration endeavours. With many distinctive technical challenges to be overcome, human spaceflight requires that numerous biological and physical systems be examined under exceptional circumstances for progress to be made. To effectively tackle such an undertaking significant intra- and international coordination and collaboration is required. Space life and biomedical science research and development (R & D) will support the Global Exploration Roadmap (GER) by enabling humans to 'endure' the extreme activity that is long duration human spaceflight. In so doing the field will discover solutions to some of our most difficult human health issues, and as a consequence benefit society as a whole. This space-specific R&D will drive a significant amount of terrestrial biomedical research and as a result the international community will not only gain benefits in the form of improved healthcare in space and on Earth, but also through the growth of its science base and industry.

Innovative approach using interprofessional simulation to educate surgical residents in technical and nontechnical skills in high-risk clinical scenarios.

PubMed

Nicksa, Grace A; Anderson, Cristan; Fidler, Richard; Stewart, Lygia

2015-03-01

The Accreditation Council for Graduate Medical Education core competencies stress nontechnical skills that can be difficult to evaluate and teach to surgical residents. During emergencies, surgeons work in interprofessional teams and are required to perform certain procedures. To obtain proficiency in these skills, residents must be trained. To educate surgical residents in leadership, teamwork, effective communication, and infrequently performed emergency surgical procedures with the use of interprofessional simulations. SimMan 3GS was used to simulate high-risk clinical scenarios (15-20 minutes), followed by debriefings with real-time feedback (30 minutes). A modified Oxford Non-Technical Skills scale (score range, 1-4) was used to assess surgical resident performance during the first half of the academic year (July-December 2012) and the second half of the academic year (January-June 2013). Anonymous online surveys were used to solicit participant feedback. Simulations were conducted in the operating room, intensive care unit, emergency department, ward, and simulation center. A total of 43 surgical residents (postgraduate years [PGYs] 1 and 2) participated in interdisciplinary clinical scenarios, with other health care professionals (nursing, anesthesia, critical care, medicine, respiratory therapy, and pharmacy; mean number of nonsurgical participants/session: 4, range 0-9). Thirty seven surgical residents responded to the survey. Simulation of high-risk clinical scenarios: postoperative pulmonary embolus, pneumothorax, myocardial infarction, gastrointestinal bleeding, anaphylaxis with a difficult airway, and pulseless electrical activity arrest. Evaluation of resident skills: communication, leadership, teamwork, problem solving, situation awareness, and confidence in performing emergency procedures (eg, cricothyroidotomy). A total of 31 of 35 (89%) of the residents responding found the sessions useful. Additionally, 28 of 33 (85%) reported improved confidence doing procedures and 29 of 37 (78%) reported knowing when the procedure should be applied. Oxford Non-Technical Skills evaluation demonstrated significant improvement in PGY 2 resident performance assessed during the 2 study periods: communication score increased from 3 to 3.71 (P=.01), leadership score increased from 2.77 to 3.86 (P<.001), teamwork score increased from 3.15 to 3.86 (P=.007), and procedural ability score increased from 2.23 to 3.43 (P=.03). There were no statistically significant improved scores in PGY 2 decision making or situation awareness. No improvements in skills were seen among PGY 1 participants. The PGY 2 residents improved their skills, but the PGY 1 residents did not. Participants found interprofessional simulations to be realistic and a valuable educational tool. Interprofessional simulation provides a valuable means of educating surgical residents and evaluating their skills in real-life clinical scenarios.

[Assessment of the sonographer's knowledge on the second trimester ultrasound recommendations of the National Technical Committee of Ultrasound].

PubMed

Matar, M; Picone, O; Dalmon, C; Ayoubi, J-M

2013-09-01

To evaluate the sonographers' knowledge of the National Technical Committee of Ultrasound's recommendations concerning second trimester ultrasound. Anonymous questionnaire was sent by e-mails containing 25 questions about demographic elements, the practice of second trimester ultrasound and the recommendations of the National Technical Committee of Ultrasound about second trimester ultrasound. Six hundred and eighty-four responses were obtained. Six hundred and fifty-three upon 684 (95%) of respondents practice second trimester ultrasound and 635 upon 653 (97%) know about the existence of the report of the National Technical Committee of Ultrasound. The rates of correct answers concerning recommended biometrical images vary between 97% for the biparietal diameter and head circumference, 98% for abdominal circumference and 100% for the femur length. While for morphological images, rates vary between 52% and 100%. A subgroup analysis (whether the respondents have already read the recommendations or not) showed that those who had read the recommendations have significantly better results than those who did not. Those who have already read the recommendations have better knowledge and global knowledge can be improved. National recommendations serve to promote a policy of quality assurance of ultrasound and may be used in medicolegal issues. The societies that make recommendations should more diffuse their work and practitioners should make effort to pursue the continuing medical education and to implement the recommendations. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Technical refinements to improve outcomes following distal hypospadias repair.

PubMed

Lacy, John M; Hendrix, Lauren N; Bole, Raevti; Habib, Enmar; Wootton, Cole W; Ziada, Ali M

2016-02-01

Hypospadias complications, most notably meatal stenosis, are commonly reported to occur after tubularized incised plate (TIP) hypospadias repair. We focus on a point of technique in TIP repair and its effect on outcome of this possible complication, as well as other commonly reported complications. Meatal stenosis after TIP can be avoided if the urethra and overlying glans are dissected and sutured separately with no attempt at cross suturing whether the urethra ends below, behind, or above the glans sutures. This hypothesis was evaluated by a prospective data collection before and after implementation to evaluate the effect of a technical refinement on rates of meatal stenosis in TIP hypospadias repair. All cases of coronal to midpenile hypospadias repair during two periods were included in our study. Group 1 included 140 consecutive patients over a 30 month period. Group 2 included 122 consecutive patients over a 36 month period during which the above mentioned technical changes were implemented by all participating pediatric urologists. Rates of complications between the two groups were compared with special emphasis on meatal stenosis. Median follow up for both groups was > 1 year. Overall complication rate in Group 1 was 31.5% compared to 9.8% in Group 2. Meatal stenosis was significantly reduced from 13 patients (9.3%) in Group 1 to 2 patients (1.6%) in Group 2, p = 0.008. The technical refinements described resulted in reduction of complication rates and a decrease in incidence of meatal stenosis.

Technical Writing in Hydrogeology.

ERIC Educational Resources Information Center

Tinker, John R., Jr.

1986-01-01

A project for Writing Across the Curriculum at the University of Wisconsin-Eau Claire is described as a method to relate the process of writing to the process of learning hydrology. The project focuses on an actual groundwater contamination case and is designed to improve the technical writing skills of students. (JN)

Improving Vocational Education in Post-High School Institutions. Final Report.

ERIC Educational Resources Information Center

MacArthur, Earl W.

Four ongoing programs in postsecondary vocational-technical education were examined in a national institute attended by 59 representatives from 31 states. Institutions reporting programs were: (1) Los Angeles Trade and Technical College, California, (2) Washtenaw Community College, Ann Arbor, Michigan, (3) Rockingham Community College, Wentworth,…

Improving Sex Equity in Postsecondary Vocational/Technical Programs: A Resource Manual.

ERIC Educational Resources Information Center

Lovelace, Bill E.; And Others

This manual was developed to assist postsecondary administrators, faculty, staff, and students by providing materials specifically designed to eliminate sex bias and stereotyping of students and to recruit students into nontraditional careers and vocational-technical programs. The manual is organized in six sections. The first section introduces…

State Technical Assistance Initiatives for IDEA Part B Programs.

ERIC Educational Resources Information Center

Hanft, Barbara

This report discusses a study that examined state technical assistance (TA) infrastructures that support research-based practices for improved outcomes for students with disabilities served under Part B of the Individuals with Disabilities Education Act. The 10 participating states included: Alabama, Colorado, Iowa, Maryland, Montana, Oklahoma,…

78 FR 29239 - Final Priority; Technical Assistance To Improve State Data Capacity-National Technical Assistance...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

... reporting requirements. Changes: None. Focus TA on Assessment and Discipline Data Comment: Three commenters agreed with the importance of focusing on assessment and discipline data, and two commenters agreed with... decisions and actions associated with data collection and reporting. One commenter stated that assessment...

Technical Advances and Fifth Grade Reading Comprehension: Do Students Benefit?

ERIC Educational Resources Information Center

Fountaine, Drew

This paper takes a look at some recent studies on utilization of technical tools, primarily personal computers and software, for improving fifth-grade students' reading comprehension. Specifically, the paper asks what benefits an educator can expect students to derive from closed-captioning and computer-assisted reading comprehension products. It…

Existing School Buildings: Incremental Seismic Retrofit Opportunities.

ERIC Educational Resources Information Center

Federal Emergency Management Agency, Washington, DC.

The intent of this document is to provide technical guidance to school district facility managers for linking specific incremental seismic retrofit opportunities to specific maintenance and capital improvement projects. The linkages are based on logical affinities, such as technical fit, location of the work within the building, cost saving…

Improving Cancer-Related Outcomes with Connected Health - Action Items at a Glance

Cancer.gov

Action Item 1.1: Health IT stakeholder groups should continue to collaborate to overcome policy and technical barriers to a nationwide, interoperable health IT system. Action Item 1.2: Technical standards for information related to cancer care across the continuum should be developed, tested, disseminated, and adopted.

Theorycrafting the Classroom: Constructing the Introductory Technical Communication Course as a Game

ERIC Educational Resources Information Center

Finseth, Carly

2015-01-01

When games are approached as a pedagogical methodology, the homologies between games and technical communication are highlighted: pedagogy that teaches people to play and succeed within certain confines; classroom assessment that provides meaningful feedback to encourage self-improvement; instructional design that incorporates gaming theory and…

Goddard Geophysical and Astronomical Observatory

NASA Technical Reports Server (NTRS)

Redmond, Jay; Kodak, Charles

2001-01-01

This report summarizes the technical parameters and the technical staff of the Very Long Base Interferometry (VLBI) system at the fundamental station Goddard Geophysical and Astronomical Observatory (GGAO). It also gives an overview about the VLBI activities during the previous year. The outlook lists the outstanding tasks to improve the performance of GGAO.

Camels and Camshafts: Career and Technical Education in the Persian Gulf.

ERIC Educational Resources Information Center

Harnish, Dorothy

2003-01-01

Describes a cooperative project of the University of Georgia and the Ministry of Education and Youth in the United Arab Emirates to improve the secondary technical education system. Provides background information, describes project activities, looks at cultural issues, and discusses similarities and differences in education. (JOW)

Using Design Principles to Teach Technical Communication.

ERIC Educational Resources Information Center

Markel, Mike

1995-01-01

Compares the writing of two students--a competent writer and a weak one--in a technical communication course before and after discussion of design principles. Finds that a basic understanding of design principles helped them improve document macrostructure but had little effect on document microstructure. Suggests that integrating document design…

20 CFR 628.325 - Incentive grants, capacity building, and technical assistance.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., exceeding title II performance standards (section 106(b)(7)). (2) Incentive grant funds under this section... give consideration to recognizing the performance of service providers within the State. (5) SDA's... capacity building and technical assistance efforts aimed at improving the competencies of the personnel who...

Design Software Gives Rocketry a Boost in the Classroom

ERIC Educational Resources Information Center

Wilson, Spencer C.

2005-01-01

Building and launching model rockets makes a great activity for a technology education class. A model rocket curriculum provides a valuable tool for improving students' technical skills, including following technical instructions and procedures while learning about aerospace technology. This article describes a way of making model rocketry more…

Design Software Gives Rocketry a Boost in the Classroom

ERIC Educational Resources Information Center

Wilson, Spencer C.

2005-01-01

Building and launching model rockets makes a great activity for a technology education class. A model rocket curriculum provides a valuable tool for improving students' technical skills that includes, but is not limited to, following technical instructions and procedures while learning about aerospace technology. This article describes a way that…

Improvement of mathematical models for simulation of vehicle handling : volume 7 : technical manual for the general simulation

DOT National Transportation Integrated Search

1980-03-01

This volume is the technical manual for the general simulation. Mathematical modelling of the vehicle and of the human driver is presented in detail, as are differences between the APL simulation and the current one. Information on model validation a...

IMIS: Integrated Maintenance Information System. A maintenance information delivery concept

NASA Technical Reports Server (NTRS)

Vonholle, Joseph C.

1987-01-01

The Integrated Maintenance Information System (IMIS) will optimize the use of available manpower, enhance technical performance, improve training, and reduce the support equipment and documentation needed for deployment. It will serve as the technician's single, integrated source of all the technical information required to perform modern aircraft maintenance.

Gender, Technology, and the History of Technical Communication.

ERIC Educational Resources Information Center

Durack, Katherine T.

1997-01-01

Considers why women have been absent from the history of technical communication. Discusses research from the history of technology suggesting that notions of "technology,""work," and "workplace" may be gendered terms. Concludes with several suggestions for defining technical communication so that significant works of…

Global hexachlorocyclohexane use trends and their impact on the Arctic atmospheric environment

NASA Astrophysics Data System (ADS)

Li, Y. F.; Bidleman, T. F.; Barrie, L. A.; McConnell, L. L.

The relationship between the global technical HCH use trends and their impact on the arctic atmospheric environment has been studied. Two significant drops in global technical HCH usage were identified. In 1983, China banned the use of technical HCH. This represented the largest drop ever in global use rates. In 1990 India stopped technical HCH usage in agriculture and the former Soviet Union banned the use of technical HCH. Since 1990, India has been the biggest user of technical HCH in the world. Significant drops in atmospheric α-HCH in the arctic were observed between 1982 and 1983, and again between 1990 and 1992. The rapid response in atmospheric concentrations to usage is encouraging; however, since α-HCH concentrations in the arctic waters have remained relatively unchanged, the decline in atmospheric α-HCH has reversed the net direction of air-sea gas flux. The accumulated mass in oceans and large lakes may represent a new source of HCH to the arctic atmosphere.

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study

PubMed Central

2012-01-01

Background The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. Method We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. Results In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we identified three approaches community pharmacies used to appropriate procedures in practice. These were ‘technically oriented’, ‘improvising’ or ‘socially oriented’. Conclusion We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools. PMID:23256484

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study.

PubMed

Harvey, Jasmine; Avery, Anthony J; Waring, Justin; Barber, Nick

2012-12-20

The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we identified three approaches community pharmacies used to appropriate procedures in practice. These were 'technically oriented', 'improvising' or 'socially oriented'. We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools.

An assessment of individualized technical ear training for audio production.

PubMed

Kim, Sungyoung

2015-07-01

An individualized technical ear training method is compared to a non-individualized method. The efficacy of the individualized method is assessed using a standardized test conducted before and after the training period. Participants who received individualized training improved better than the control group on the test. Results indicate the importance of individualized training for acquisition of spectrum-identification and spectrum-matching skills. Individualized training, therefore, should be implemented by default into technical ear training programs used in audio production industry and education.

O merah po dal'nejsemu ulucseniju podgotovki kvalificirovannyh rabocih v ucebnyh zavedenijah sistemy professional'no-tehniceskogo obrazovanija (Decree Concerning Measures for Further Improvement of the Training of Skilled Workers in the Establishments of the Vocational and Technical Education System) (April 2, 1969).

ERIC Educational Resources Information Center

Communist Party of the Soviet Union, Moscow. Central Committee.

This document is an English-language abstract (approximately 1,500 words) of a decree issued by the Soviet Government to upgrade the system of vocational and industrial training in the USSR. It claims that vocational and technical educational establishments should gradually be transformed into vocational-technical colleges offering a 3-4 year…

Competency-Based Education in Low Resource Settings: Development of a Novel Surgical Training Program.

PubMed

McCullough, Meghan; Campbell, Alex; Siu, Armando; Durnwald, Libby; Kumar, Shubha; Magee, William P; Swanson, Jordan

2018-03-01

The unmet burden of surgical disease represents a major global health concern, and a lack of trained providers is a critical component of the inadequacy of surgical care worldwide. Competency-based training has been advanced in high-income countries, improving technical skills and decreasing training time, but it is poorly understood how this model might be applied to low- and middle-income countries. We describe the development of a competency-based program to accelerate specialty training of in-country providers in cleft surgery techniques. The program was designed and piloted among eight trainees at five international cleft lip and palate surgical mission sites in Latin America and Africa. A competency-based evaluation form, designed for the program, was utilized to grade general technical and procedure-specific competencies, and pre- and post-training scores were analyzed using a paired t test. Trainees demonstrated improvement in average procedure-specific competency scores for both lip repairs (60.4-71.0%, p < 0.01) and palate (50.6-66.0%, p < 0.01). General technical competency scores also improved (63.6-72.0%, p < 0.01). Among the procedural competencies assessed, surgical markings showed the greatest improvement (19.0 and 22.8% for lip and palate, respectively), followed by nasal floor/mucosal approximation (15.0%) and hard palate dissection (17.1%). Surgical delivery models in LMICs are varied, and trade-offs often exist between goals of case throughput, quality and training. Pilot program results show that procedure-specific and general technical competencies can be improved over a relatively short time and demonstrate the feasibility of incorporating such a training program into surgical outreach missions.

Technical improvements during 2005 at the La Plata Reflector TelescopeÂ

NASA Astrophysics Data System (ADS)

Bareilles, F. A.; Schwartz, M. A.; Garcia, R. E.; Solans, J. H.; Fernández Lajús, E.

We present here the technical developments carried out at the 0.8-m Reflector telescope of the La Plata Observatory during 2005, namely: the development of a new software, running under GNU/Linux, for the control of the CCD Star I Camera; the design and construction of a infrared control for the telescope and dome movements; the calculation and building of the primary and secondary-mirror baffles. These are framed in a plan for improvement, updating and automatization of this historic telescope. FULL TEXT IN SPANISH

Fire safety: A case study of technology transfer

NASA Technical Reports Server (NTRS)

Heins, C. F.

1975-01-01

Two basic ways in which NASA-generated technology is being used by the fire safety community are described. First, improved products and systems that embody NASA technical advances are entering the marketplace. Second, NASA test data and technical information related to fire safety are being used by persons concerned with reducing the hazards of fire through improved design information and standards. The development of commercial fire safety products and systems typically requires adaptation and integration of aerospace technologies that may not have been originated for NASA fire safety applications.

Face, content, and construct validity of four, inanimate training exercises using the da Vinci ® Si surgical system configured with Single-Site ™ instrumentation.

PubMed

Jarc, Anthony M; Curet, Myriam

2015-08-01

Validated training exercises are essential tools for surgeons as they develop technical skills to use robot-assisted minimally invasive surgical systems. The purpose of this study was to show face, content, and construct validity of four, inanimate training exercises using the da Vinci (®) Si surgical system configured with Single-Site (™) instrumentation. New (N = 21) and experienced (N = 6) surgeons participated in the study. New surgeons (11 Gynecology [GYN] and 10 General Surgery [GEN]) had not completed any da Vinci Single-Site cases but may have completed multiport cases using the da Vinci system. They participated in this study prior to attending a certification course focused on da Vinci Single-Site instrumentation. Experienced surgeons (5 GYN and 1 GEN) had completed at least 25 da Vinci Single-Site cases. The surgeons completed four inanimate training exercises and then rated them with a questionnaire. Raw metrics and overall normalized scores were computed using both video recordings and kinematic data collected from the surgical system. The experienced surgeons significantly outperformed new surgeons for many raw metrics and the overall normalized scores derived from video review (p < 0.05). Only one exercise did not achieve a significant difference between new and experienced surgeons (p = 0.08) when calculating an overall normalized score using both video and advanced metrics derived from kinematic data. Both new and experienced surgeons rated the training exercises as appearing, to train and measure technical skills used during da Vinci Single-Site surgery and actually testing the technical skills used during da Vinci Single-Site surgery. In summary, the four training exercises showed face, content, and construct validity. Improved overall scores could be developed using additional metrics not included in this study. The results suggest that the training exercises could be used in an overall training curriculum aimed at developing proficiency in technical skills for surgeons new to da Vinci Single-Site instrumentation.

Five years' experience in a (really) rural teleradiology practice. Was it worth it? The successes and the failures

NASA Astrophysics Data System (ADS)

Telepak, Robert J.; Freede, Emily; Jaramillo, Richard E.; Alverson, Dale C.

1998-07-01

During the past 5 years (1992 - 1997) the Department of Radiology of the University of New Mexico Health Sciences Center has developed an active teleradiology program. Contracts are in place to provide both routine and emergency image interpretations 24 hours per day, every day of the year. Several rural hospitals are served as well as the Navajo Indian Health Service. Areas of success: include significantly improved radiologic service to the rural sites, specialty consultations to general radiologists, successful teaching of teleradiology practice to radiology residents and staff, good diagnostic quality images, a small but real profit, improved quality assurance for the rural sites, and no significant medical-legal problems. Failures include: significant telecommunications problems, lack of acceptance and utilization by some of the rural sites, poor QA compliance by some sites, a long period of disappointing technical support by equipment vendors, and slow acceptance of DICOM by equipment manufacturers. The successes outweigh the failures. We would do it again -- but somewhat differently. We offer advice to institutions developing a new rural teleradiology operation.

Investigation of a family of power conditioners integrated into a utility grid: Category 1

NASA Astrophysics Data System (ADS)

Wood, P.; Putkovich, R. P.

1981-07-01

Technical issues regarding ac and dc interface requirements were studied. A baseline design was selected to be a good example of existing technology which would not need significant development effort for its implementation in residential solar photovoltaic systems. Alternative technologies are evaluated to determine which meet the baseline specification, and their costs and losses are evaluated. Areas in which cost improvements can be obtained are studied, and the three best candidate technologies--the current sourced converter, the HF front end converter, and the programmed wave converter--are compared. It is concluded that the designs investigated will meet, or with slight improvement could meet, short term efficiency goals. Long term efficiency goals could be met if an isolation transformer were not required in the power conditioning equipment. None of the technologies studied can meet cost goals unless further improvements are possible.

[Understanding the non-use of long-lasting impregnated nets (LLINs) in Niger].

PubMed

Faye, S L

2012-01-01

In Niger, malaria is the leading cause of mortality and morbidity among pregnant women and children under 5 years. To decrease these rates, the country initiated a prevention policy of free distribution of long-lasting impregnated nets (LLINs). However, improved physical access to this preventive tool has not led to its regular use in households. A nationally representative quantitative and qualitative survey sought to document the reasons for non-use. The results show that the possession of a LLIN is quite low and confirm the low utilization rate, with significant differences by region. Cultural beliefs are not the main barriers to the use of LLINs in Niger. Knowledge and social, technical, environmental and economic dimensions were all more decisive. These results suggest that while improving awareness and communication is important for changing behavior, it cannot alone remove certain socioeconomic barriers and improve LLIN use.

Conceptual design study of an Improved Gas Turbine (IGT) powertrain

NASA Technical Reports Server (NTRS)

Johnson, R. A.

1979-01-01

Design concepts for an improved automotive gas turbine powertrain are discussed. Twenty percent fuel economy improvement (over 1976), competitive costs (initial and life cycle), high reliability/life, low emissions, and noise/safety compliance were among the factors considered. The powertrain selected consists of a two shaft gas turbine engine with variable geometry aerodynamic components and a single disk rotating regenerator. The regenerator disk, gasifier turbine rotor, and several hot section flowpath parts are ceramic. The powertrain utilizes a conventional automatic transmission. The closest competitor was a single shaft turbine engine matched to a continuously variable transmission (CVT). Both candidate powertrain systems were found to be similar in many respects; however, the CVT represented a significant increase in development cost, technical risk, and production start-up costs over the conventional automatic transmission. Installation of the gas turbine powertrain was investigated for a transverse mounted, front wheel drive vehicle.

Fetal MRI: A Technical Update with Educational Aspirations

PubMed Central

Gholipour, Ali; Estroff, Judith A.; Barnewolt, Carol E.; Robertson, Richard L.; Grant, P. Ellen; Gagoski, Borjan; Warfield, Simon K.; Afacan, Onur; Connolly, Susan A.; Neil, Jeffrey J.; Wolfberg, Adam; Mulkern, Robert V.

2015-01-01

Fetal magnetic resonance imaging (MRI) examinations have become well-established procedures at many institutions and can serve as useful adjuncts to ultrasound (US) exams when diagnostic doubts remain after US. Due to fetal motion, however, fetal MRI exams are challenging and require the MR scanner to be used in a somewhat different mode than that employed for more routine clinical studies. Herein we review the techniques most commonly used, and those that are available, for fetal MRI with an emphasis on the physics of the techniques and how to deploy them to improve success rates for fetal MRI exams. By far the most common technique employed is single-shot T2-weighted imaging due to its excellent tissue contrast and relative immunity to fetal motion. Despite the significant challenges involved, however, many of the other techniques commonly employed in conventional neuro- and body MRI such as T1 and T2*-weighted imaging, diffusion and perfusion weighted imaging, as well as spectroscopic methods remain of interest for fetal MR applications. An effort to understand the strengths and limitations of these basic methods within the context of fetal MRI is made in order to optimize their use and facilitate implementation of technical improvements for the further development of fetal MR imaging, both in acquisition and post-processing strategies. PMID:26225129

Initial experience of using high field strength intraoperative MRI for neurosurgical procedures.

PubMed

Raheja, Amol; Tandon, Vivek; Suri, Ashish; Sarat Chandra, P; Kale, Shashank S; Garg, Ajay; Pandey, Ravindra M; Kalaivani, Mani; Mahapatra, Ashok K; Sharma, Bhawani S

2015-08-01

We report our initial experience to optimize neurosurgical procedures using high field strength intraoperative magnetic resonance imaging (IOMRI) in 300 consecutive patients as high field strength IOMRI rapidly becomes the standard of care for neurosurgical procedures. Three sequential groups (groups A, B, C; n=100 each) were compared with respect to time management, complications and technical difficulties to assess improvement in these parameters with experience. We observed a reduction in the number of technical difficulties (p<0.001), time to induction (p<0.001) and total anesthesia time (p=0.007) in sequential groups. IOMRI was performed for neuronavigation guidance (n=252) and intraoperative validation of extent of resection (EOR; n=67). Performing IOMRI increased the EOR over and beyond the primary surgical attempt in 20.5% (29/141) and 18% (11/61) of patients undergoing glioma and pituitary surgery, respectively. Overall, EOR improved in 59.7% of patients undergoing IOMRI (40/67). Intraoperative tractography and real time navigation using re-uploaded IOMRI images (accounting for brain shift) helps in intraoperative planning to reduce complications. IOMRI is an asset to neurosurgeons, helping to augment the EOR, especially in glioma and pituitary surgery, with no significant increase in morbidity to the patient. Copyright © 2015 Elsevier Ltd. All rights reserved.

A survey of nurses' perceived competence and educational needs in performing resuscitation.

PubMed

Roh, Young Sook; Issenberg, S Barry; Chung, Hyun Soo; Kim, So Sun; Lim, Tae Ho

2013-05-01

Effective training is needed for high-quality performance of staff nurses, who are often the first responders in initiating resuscitation. There is insufficient evidence to identify specific educational strategies that improve outcomes, including early recognition and rescue of the critical patient. This study was conducted to identify perceived competence and educational needs as well as to examine factors influencing perceived competence in resuscitation among staff nurses to build a resuscitation training curriculum. A convenience sample of 502 staff nurses was recruited from 11 hospitals in a single city. Staff nurses were asked to complete a self-administered questionnaire. On a five-point scale, chest compression was the lowest-rated technical skill (M = 3.33, SD = 0.80), whereas staying calm and focusing on required tasks was the lowest-rated non-technical skill (M = 3.30, SD = 0.80). Work duration, the usefulness of simulation, recent code experience, and recent simulation-based training were significant factors in perceived competence, F(4, 496) = 45.94, p < .001. Simulation-based resuscitation training was the most preferred training modality, and cardiac arrest was the most preferred training topic. Based on this needs assessment, a simulation-based resuscitation training curriculum with cardiac arrest scenarios is suggested to improve the resuscitation skills of staff nurses. Copyright 2013, SLACK Incorporated.

Organizational Cost of Quality Improvement for Depression Care

PubMed Central

Liu, Chuan-Fen; Rubenstein, Lisa V; Kirchner, JoAnn E; Fortney, John C; Perkins, Mark W; Ober, Scott K; Pyne, Jeffrey M; Chaney, Edmund F

2009-01-01

Objective We documented organizational costs for depression care quality improvement (QI) to develop an evidence-based, Veterans Health Administration (VA) adapted depression care model for primary care practices that performed well for patients, was sustained over time, and could be spread nationally in VA. Data Sources and Study Setting Project records and surveys from three multistate VA administrative regions and seven of their primary care practices. Study Design Descriptive analysis. Data Collection We documented project time commitments and expenses for 86 clinical QI and 42 technical expert support team participants for 4 years from initial contact through care model design, Plan–Do–Study–Act cycles, and achievement of stable workloads in which models functioned as routine care. We assessed time, salary costs, and costs for conference calls, meetings, e-mails, and other activities. Principle Findings Over an average of 27 months, all clinics began referring patients to care managers. Clinical participants spent 1,086 hours at a cost of $84,438. Technical experts spent 2,147 hours costing $197,787. Eighty-five percent of costs derived from initial regional engagement activities and care model design. Conclusions Organizational costs of the QI process for depression care in a large health care system were significant, and should be accounted for when planning for implementation of evidence-based depression care. PMID:19146566

Improved Emergency Egress Lighting System for the ISS

NASA Technical Reports Server (NTRS)

Eaton, Leslie L.; Barr, Don A.

2005-01-01

Emergency lights provide illumination in corridors, stairwells, ramps, escalators, aisles, and exit passageways during power failures. Safety and visibility are critical during a power outage. If emergency lights fail to operate properly, the building occupants can become disoriented. Four documents in a collection discuss different topics relating to a proposed improved emergency egress lighting system (EELS) for the International Space Station (ISS). While the present EELS is designed around rows of green-light-emitting diodes, the proposed system contains strips of electroluminescent tape using different colors for each egress path. The proposed EELS can be powered by the same battery currently used by the present EELS, but would require an inverter because electroluminescent devices require AC. Electroluminescent devices also require significantly less current and, depending on the color, would emit 3 to 8 times the light of the present EELS. In addition, they could operate for up to 75 hours (versus .20 minutes for the present system). The first document contains a one-page summary of the proposal and an evaluation of technical merit. The second document summarizes the motivation for, and the design of, the proposed EELS. The third document addresses relevant aspects of the measurement of spectral sensitivity and the psychophysics of perception of light. The fourth document presents additional background information and technical specifications for the electroluminescent tapes.

Macroergonomic analysis and design for improved safety and quality performance.

PubMed

Kleiner, B M

1999-01-01

Macroergonomics, which emerged historically after sociotechnical systems theory, quality management, and ergonomics, is presented as the basis for a needed integrative methodology. A macroergonomics methodology was presented in some detail to demonstrate how aspects of microergonomics, total quality management (TQM), and sociotechnical systems (STS) can be triangulated in a common approach. In the context of this methodology, quality and safety were presented as 2 of several important performance criteria. To demonstrate aspects of the methodology, 2 case studies were summarized with safety and quality performance results where available. The first case manipulated both personnel and technical factors to achieve a "safety culture" at a nuclear site. The concept of safety culture is defined in INSAG-4 (International Atomic Energy Agency, 1991). as "that assembly of characteristics and attitudes in organizations and individuals which establishes that, as an overriding priority, nuclear plant safety issues receive the attention warranted by their significance." The second case described a tire manufacturing intervention to improve quality (as defined by Sink and Tuttle, 1989) through joint consideration of technical and social factors. It was suggested that macroergonomics can yield greater performance than can be achieved through ergonomic intervention alone. Whereas case studies help to make the case, more rigorous formative and summative research is needed to refine and validate the proposed methodology respectively.

A Laboratory Manual for Stepwise Cerebral White Matter Fiber Dissection.

PubMed

Koutsarnakis, Christos; Liakos, Faidon; Kalyvas, Aristotelis V; Sakas, Damianos E; Stranjalis, George

2015-08-01

White matter fiber dissection is an important method in acquiring a thorough neuroanatomic knowledge for surgical practice. Previous studies have definitely improved our understanding of intrinsic brain anatomy and emphasized on the significance of this technique in modern neurosurgery. However, current literature lacks a complete and concentrated laboratory guide about the entire dissection procedure. Hence, our primary objective is to introduce a detailed laboratory manual for cerebral white matter dissection by highlighting consecutive dissection steps, and to stress important technical comments facilitating this complex procedure. Twenty adult, formalin-fixed cerebral hemispheres were included in the study. Ten specimens were dissected in the lateromedial and 10 in the mediolateral direction, respectively, using the fiber dissection technique and the microscope. Eleven and 8 consecutive and distinctive dissection steps are recommended for the lateromedial and mediolateral dissection procedures, respectively. Photographs highlighting various anatomic landmarks accompany every step. Technical recommendations, facilitating the dissection process, are also indicated. The fiber dissection technique, although complex and time consuming, offers a three-dimensional knowledge of intrinsic brain anatomy and architecture, thus improving both the quality of microneurosurgery and the patient's standard of care. The present anatomic study provides a thorough dissection manual to those who study brain anatomy using this technique. Copyright © 2015 Elsevier Inc. All rights reserved.

Analytical SuperSTEM for extraterrestrial materials research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradley, J P; Dai, Z R

2009-09-08

Electron-beam studies of extraterrestrial materials with significantly improved spatial resolution, energy resolution and sensitivity are enabled using a 300 keV SuperSTEM scanning transmission electron microscope with a monochromator and two spherical aberration correctors. The improved technical capabilities enable analyses previously not possible. Mineral structures can be directly imaged and analyzed with single-atomic-column resolution, liquids and implanted gases can be detected, and UV-VIS optical properties can be measured. Detection limits for minor/trace elements in thin (<100 nm thick) specimens are improved such that quantitative measurements of some extend to the sub-500 ppm level. Electron energy-loss spectroscopy (EELS) can be carried outmore » with 0.10-0.20 eV energy resolution and atomic-scale spatial resolution such that variations in oxidation state from one atomic column to another can be detected. Petrographic mapping is extended down to the atomic scale using energy-dispersive x-ray spectroscopy (EDS) and energy-filtered transmission electron microscopy (EFTEM) imaging. Technical capabilities and examples of the applications of SuperSTEM to extraterrestrial materials are presented, including the UV spectral properties and organic carbon K-edge fine structure of carbonaceous matter in interplanetary dust particles (IDPs), x-ray elemental maps showing the nanometer-scale distribution of carbon within GEMS (glass with embedded metal and sulfides), the first detection and quantification of trace Ti in GEMS using EDS, and detection of molecular H{sub 2}O in vesicles and implanted H{sub 2} and He in irradiated mineral and glass grains.« less

Integration of role-playing into technical skills training: a randomized controlled trial.

PubMed

Nikendei, C; Kraus, B; Schrauth, M; Weyrich, P; Zipfel, S; Herzog, W; Jünger, J

2007-11-01

Recently, efforts have been undertaken to enhance the face validity of technical skills training by introducing role-plays and standardised patients. Since little is known about the effects of role-playing with respect to the realism of a training situation and students' objective performance, we performed a randomized controlled trial. 36 medical students participated in videotaped small group skills-lab sessions on the topics of Doppler sonography and gastric tube insertion. One half of the students participated in role-plays and the other half practised without role-playing. Realism of the training situation was analysed by means of post-intervention self-selected student survey evaluations. Technical performance and patient-physician communication were assessed by independent ratings of the videotaped sessions. The physician's role was regarded to be significantly more realistic when performing role-plays. Assessment of videotaped sessions showed that practising technical skills by performing role-plays resulted in significantly better patient-physician communication whereas students' technical performance did not differ between groups. Introducing role-plays enhances the realism of technical skills training and leads to better patient-physician communication. Students do not seem to be overstrained by practising clinical technical skills using role-plays. We conclude that role-playing is a valuable method in practising technical skills.

Improved self-contained breathing apparatus concept. Final report Oct 80-Jun 82

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, L.; Walker, J.

1982-08-01

Past operational experiences of USAF fire fighting and rescue teams have indicated the need for an improved self-contained breathing apparatus (SCBA). In October 1980, a contract was awarded to Electronic Data Systems, Panama City, Florida, to design and develop a prototype SCBA that would meet Air Force technical requirements. A prototype was designed, developed, and tested through a subcontract with Reimers Consultants, Falls Church, Virginia. This report describes the technical requirements, a detailed technical description of the unit, and the unmanned test procedures and results. The unmanned testing demonstrate that the prototype SCBA meets all performance requirements, except for weight.more » The fully charged prototype weights 34 pounds, the maximum acceptable weight is 30 pounds. With the other performance requirements either met or exceeded, manned testing of the SCBA can proceed.« less

Improving the results of transarterial embolization of type 2 endoleaks with the embolic polymer Onyx

PubMed Central

Wnuk, Emilia; Maciag, Rafal; Solonynko, Bohdan; Korzeniowski, Krzysztof; Lamparski, Krzysztof; Rowinski, Olgierd

2016-01-01

Introduction Type 2 endoleaks (T2E) occur in 10 to 20% of patients after endovascular abdominal aortic aneurysm repair (EVAR) and remain a significant clinical issue. Aim To evaluate the efficacy and clinical outcomes of transarterial treatment of persistent type II endoleaks after EVAR using the liquid embolic Onyx. Material and methods From February 2012 to August 2015 transarterial T2E embolization was attempted in 22 patients (21 men, median age: 73, range: 62–88 years). Indications for treatment included an increase in the diameter of the aneurysm sac above 5 mm and a persistent endoleak observed for more than 6 months. Mean time from EVAR to endoleak treatment was 43 months (range: 2–125 months). Results Primary technical success was achieved in 17 (77.3%) patients and secondary technical success in 81.8%, with 0% in-hospital mortality. The mean procedure time was 95 ±48 min, with an average fluoroscopy time of 54 ±25 min. The mean amount of Onyx used was 7.5 ±6.6 ml. Clinical success was seen in 17/21 patients with follow-up imaging (80.9%). Mean follow-up time was 17 months (range: 3–38 months). Conclusions Onyx has been shown to effectively stabilize previous aneurysm growth as a result of the T2E in the majority of our patients. Transarterial embolization of T2E can be significantly improved as compared to previously reported results by using liquid embolic polymers such as Onyx. PMID:28194246

Cytogenetics in the management of lymphomas and lymphoproliferative disorders in adults and children: an update by the Groupe francophone de cytogénétique hématologique (GFCH).

PubMed

Lefebvre, Christine; Callet-Bauchu, Evelyne; Chapiro, Elise; Nadal, Nathalie; Penther, Dominique; Poirel, Hélène-Antoine

2016-10-01

Non-Hodgkin's lymphomas and lymphoproliferative disorders include a high number of heterogeneous entities, described in the 2008 WHO classification. This classification reflects the crucial role of a multidisciplinary approach which integrates cytogenetic results both for the notion of clonality and for differential diagnosis between these entities. The prognostic impact of some cytogenetic abnormalities or genome complexity is also confirmed for many of these entities. Novel provisional entities have been described, such as BCLU (B-cell lymphoma unclassifiable with features intermediate between diffuse large B-cell lymphoma and Burkitt lymphoma) for which karyotype is critical to distinguish BCLU from Burkitt's lymphoma. The karyotype can be established from any tumour or liquid infiltrated by lymphoma cells. Recent adaptations of technics for cellular cultures according to the subtype of known (or suspected) lymphoma have significantly improved the percentage of informative karyotypes. Conventional karyotypes remain the best technical approach recommended for most of these subtypes. Interphase and/or metaphase FISH also represents a solid and rapid approach, because of the significant number of recurrent (sometimes specific) rearrangements of these entities. Next generation sequencing technologies contribute to enrich genomic data and substantially improve the understanding of oncogenic mechanisms underlying these lymphoid malignancies. Some molecular biomarkers are already part of the diagnostic process (for example, somatic mutation of MYD88 in Waldenström disease) thus reinforcing the essential principle of a multidisciplinary approach for the diagnosis of all the mature lymphoid malignancies.

Percutaneous microwave ablation with artificial ascites for symptomatic uterine adenomyosis: initial experience.

PubMed

Hai, Ning; Zhang, Jing; Xu, Ruifang; Han, Zhi-Yu; Liu, Fang Yi

2017-09-01

To evaluate the feasibility, safety and technical efficacy of ultrasound-guided percutaneous microwave ablation with artificial ascites for adenomyosis. Between May 2015 and May 2016, a total of 25 patients with symptomatic adenomyosis who underwent ultrasound-guided percutaneous microwave ablation with artificial ascites were included in this retrospective study. A matching cohort of 50 patients underwent ultrasound-guided percutaneous microwave ablation without artificial ascites as controls. The technical efficacy, complications and short-term treatment effectiveness were assessed and compared with the controls. Artificial ascites was successfully achieved in all of the 25 patients with the administration of a median of 550 mL (range, 250-1200 mL) of solution. There was substantial improvement in achieving a better antenna path in 100% (20/20) of the cases with a poor antenna path. The complete separation was achieved in 23 of 25 patients. The mean ablation time was 26.5 ± 7.3 min and the median non-perfusion volume ratio was 76% which was similar to the control group (p > .05). No serious complications were observed. Patient pain scores for dysmenorrhoea showed a statistically significant decline from the baseline of 6.71 ± 0.96 to 2.92 ± 0.79 and the symptom severity score declined statistically significantly from 21.8 ± 5.5 to 16.4 ± 4.8 at 3 months follow-up. Percutaneous microwave ablation with artificial ascites is feasible, safe and can be effective in improving access for treatment of adenomyosis.

Launch Vehicle Design Process: Characterization, Technical Integration, and Lessons Learned

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.; Humphries, W. R.

2001-01-01

Engineering design is a challenging activity for any product. Since launch vehicles are highly complex and interconnected and have extreme energy densities, their design represents a challenge of the highest order. The purpose of this document is to delineate and clarify the design process associated with the launch vehicle for space flight transportation. The goal is to define and characterize a baseline for the space transportation design process. This baseline can be used as a basis for improving effectiveness and efficiency of the design process. The baseline characterization is achieved via compartmentalization and technical integration of subsystems, design functions, and discipline functions. First, a global design process overview is provided in order to show responsibility, interactions, and connectivity of overall aspects of the design process. Then design essentials are delineated in order to emphasize necessary features of the design process that are sometimes overlooked. Finally the design process characterization is presented. This is accomplished by considering project technical framework, technical integration, process description (technical integration model, subsystem tree, design/discipline planes, decision gates, and tasks), and the design sequence. Also included in the document are a snapshot relating to process improvements, illustrations of the process, a survey of recommendations from experienced practitioners in aerospace, lessons learned, references, and a bibliography.

Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

PubMed

Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

2017-08-25

Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.