Simulation-Based Acquisition of the Future Air-Land Combat System (acquisition par la simulation des systemes futurs de combat aeroterresire)

DTIC Science & Technology

2003-11-01

de défense sur des matériels, des hommes et des doctrines préexistants, mais part au contraire d’une analyse des menaces et du... hommes et les doctrines. Comme on le verra ultérieurement, cette nouvelle démarche d’ingénierie du système de défense, qui se veut proactive et non...résolvent sous des contraintes de zéro mort ou tout au moins de pertes minimales, dont l ’« acceptabilité » est essentiellement facteur de

Description and comparative evaluation of a proposed design for the low visibility approach study

DOT National Transportation Integrated Search

1985-10-01

Ths memorandum was prepared in support of the low visibility simulation study being : conducted by the FAA as a basis for establishing the lowest RVR (runway visual range) : required for safe, fail passive auto landings in Category III weather. A des...

DES Y1 Results: Validating Cosmological Parameter Estimation Using Simulated Dark Energy Surveys

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacCrann, N.; et al.

We use mock galaxy survey simulations designed to resemble the Dark Energy Survey Year 1 (DES Y1) data to validate and inform cosmological parameter estimation. When similar analysis tools are applied to both simulations and real survey data, they provide powerful validation tests of the DES Y1 cosmological analyses presented in companion papers. We use two suites of galaxy simulations produced using different methods, which therefore provide independent tests of our cosmological parameter inference. The cosmological analysis we aim to validate is presented in DES Collaboration et al. (2017) and uses angular two-point correlation functions of galaxy number counts and weak lensing shear, as well as their cross-correlation, in multiple redshift bins. While our constraints depend on the specific set of simulated realisations available, for both suites of simulations we find that the input cosmology is consistent with the combined constraints from multiple simulated DES Y1 realizations in themore » $$\\Omega_m-\\sigma_8$$ plane. For one of the suites, we are able to show with high confidence that any biases in the inferred $$S_8=\\sigma_8(\\Omega_m/0.3)^{0.5}$$ and $$\\Omega_m$$ are smaller than the DES Y1 $$1-\\sigma$$ uncertainties. For the other suite, for which we have fewer realizations, we are unable to be this conclusive; we infer a roughly 70% probability that systematic biases in the recovered $$\\Omega_m$$ and $$S_8$$ are sub-dominant to the DES Y1 uncertainty. As cosmological analyses of this kind become increasingly more precise, validation of parameter inference using survey simulations will be essential to demonstrate robustness.« less

Linking Six Sigma to simulation: a new roadmap to improve the quality of patient care.

PubMed

Celano, Giovanni; Costa, Antonio; Fichera, Sergio; Tringali, Giuseppe

2012-01-01

Improving the quality of patient care is a challenge that calls for a multidisciplinary approach, embedding a broad spectrum of knowledge and involving healthcare professionals from diverse backgrounds. The purpose of this paper is to present an innovative approach that implements discrete-event simulation (DES) as a decision-supporting tool in the management of Six Sigma quality improvement projects. A roadmap is designed to assist quality practitioners and health care professionals in the design and successful implementation of simulation models within the define-measure-analyse-design-verify (DMADV) or define-measure-analyse-improve-control (DMAIC) Six Sigma procedures. A case regarding the reorganisation of the flow of emergency patients affected by vertigo symptoms was developed in a large town hospital as a preliminary test of the roadmap. The positive feedback from professionals carrying out the project looks promising and encourages further roadmap testing in other clinical settings. The roadmap is a structured procedure that people involved in quality improvement can implement to manage projects based on the analysis and comparison of alternative scenarios. The role of Six Sigma philosophy in improvement of the quality of healthcare services is recognised both by researchers and by quality practitioners; discrete-event simulation models are commonly used to improve the key performance measures of patient care delivery. The two approaches are seldom referenced and implemented together; however, they could be successfully integrated to carry out quality improvement programs. This paper proposes an innovative approach to bridge the gap and enrich the Six Sigma toolbox of quality improvement procedures with DES.

Developpement D'un Modele Climatique Regional: Fizr Simulation des Conditions de Janvier de la Cote Ouest Nord Americaine

NASA Astrophysics Data System (ADS)

Goyette, Stephane

1995-11-01

Le sujet de cette these concerne la modelisation numerique du climat regional. L'objectif principal de l'exercice est de developper un modele climatique regional ayant les capacites de simuler des phenomenes de meso-echelle spatiale. Notre domaine d'etude se situe sur la Cote Ouest nord americaine. Ce dernier a retenu notre attention a cause de la complexite du relief et de son controle sur le climat. Les raisons qui motivent cette etude sont multiples: d'une part, nous ne pouvons pas augmenter, en pratique, la faible resolution spatiale des modeles de la circulation generale de l'atmosphere (MCG) sans augmenter a outrance les couts d'integration et, d'autre part, la gestion de l'environnement exige de plus en plus de donnees climatiques regionales determinees avec une meilleure resolution spatiale. Jusqu'alors, les MCG constituaient les modeles les plus estimes pour leurs aptitudes a simuler le climat ainsi que les changements climatiques mondiaux. Toutefois, les phenomenes climatiques de fine echelle echappent encore aux MCG a cause de leur faible resolution spatiale. De plus, les repercussions socio-economiques des modifications possibles des climats sont etroitement liees a des phenomenes imperceptibles par les MCG actuels. Afin de circonvenir certains problemes inherents a la resolution, une approche pratique vise a prendre un domaine spatial limite d'un MCG et a y imbriquer un autre modele numerique possedant, lui, un maillage de haute resolution spatiale. Ce processus d'imbrication implique alors une nouvelle simulation numerique. Cette "retro-simulation" est guidee dans le domaine restreint a partir de pieces d'informations fournies par le MCG et forcee par des mecanismes pris en charge uniquement par le modele imbrique. Ainsi, afin de raffiner la precision spatiale des previsions climatiques de grande echelle, nous developpons ici un modele numerique appele FIZR, permettant d'obtenir de l'information climatique regionale valide a la fine echelle spatiale. Cette nouvelle gamme de modeles-interpolateurs imbriques qualifies d'"intelligents" fait partie de la famille des modeles dits "pilotes". L'hypothese directrice de notre etude est fondee sur la supposition que le climat de fine echelle est souvent gouverne par des forcages provenant de la surface plutot que par des transports atmospheriques de grande echelle spatiale. La technique que nous proposons vise donc a guider FIZR par la Dynamique echantillonnee d'un MCG et de la forcer par la Physique du MCG ainsi que par un forcage orographique de meso-echelle, en chacun des noeuds de la grille fine de calculs. Afin de valider la robustesse et la justesse de notre modele climatique regional, nous avons choisi la region de la Cote Ouest du continent nord americain. Elle est notamment caracterisee par une distribution geographique des precipitations et des temperatures fortement influencee par le relief sous-jacent. Les resultats d'une simulation d'un mois de janvier avec FIZR demontrent que nous pouvons simuler des champs de precipitations et de temperatures au niveau de l'abri beaucoup plus pres des observations climatiques comparativement a ceux simules a partir d'un MCG. Ces performances sont manifestement attribuees au forcage orographique de meso-echelle de meme qu'aux caracteristiques de surface determinees a fine echelle. Un modele similaire a FIZR peut, en principe, etre implante sur l'importe quel MCG, donc, tout organisme de recherche implique en modelisation numerique mondiale de grande echelle pourra se doter d'un el outil de regionalisation.

Computer modeling of lung cancer diagnosis-to-treatment process

PubMed Central

Ju, Feng; Lee, Hyo Kyung; Osarogiagbon, Raymond U.; Yu, Xinhua; Faris, Nick

2015-01-01

We introduce an example of a rigorous, quantitative method for quality improvement in lung cancer care-delivery. Computer process modeling methods are introduced for lung cancer diagnosis, staging and treatment selection process. Two types of process modeling techniques, discrete event simulation (DES) and analytical models, are briefly reviewed. Recent developments in DES are outlined and the necessary data and procedures to develop a DES model for lung cancer diagnosis, leading up to surgical treatment process are summarized. The analytical models include both Markov chain model and closed formulas. The Markov chain models with its application in healthcare are introduced and the approach to derive a lung cancer diagnosis process model is presented. Similarly, the procedure to derive closed formulas evaluating the diagnosis process performance is outlined. Finally, the pros and cons of these methods are discussed. PMID:26380181

Improving Energy Efficiency for the Vehicle Assembly Industry: A Discrete Event Simulation Approach

NASA Astrophysics Data System (ADS)

Oumer, Abduaziz; Mekbib Atnaw, Samson; Kie Cheng, Jack; Singh, Lakveer

2016-11-01

This paper presented a Discrete Event Simulation (DES) model for investigating and improving energy efficiency in vehicle assembly line. The car manufacturing industry is one of the highest energy consuming industries. Using Rockwell Arena DES package; a detailed model was constructed for an actual vehicle assembly plant. The sources of energy considered in this research are electricity and fuel; which are the two main types of energy sources used in a typical vehicle assembly plant. The model depicts the performance measurement for process- specific energy measures of painting, welding, and assembling processes. Sound energy efficiency model within this industry has two-fold advantage: reducing CO2 emission and cost reduction associated with fuel and electricity consumption. The paper starts with an overview of challenges in energy consumption within the facilities of automotive assembly line and highlights the parameters for energy efficiency. The results of the simulation model indicated improvements for energy saving objectives and reduced costs.

Effet des Plastifiants sur la Temperature de Transition Vitreuse, Tg, du Butadiene a Terminaison Hydroxy et du Polyazoture de Glycidyle - Simulations et Experiences (Effect of the Plasticizers on the Vitreous Transition Temperature, Tg, of the Butadiene to Termination Hydroxy and the Polyazoture of Glycidyle - Simulations and Experiences)

DTIC Science & Technology

2008-09-01

diverses temperatures 26 a) HTPB pur b) HTPB-DOA (polymere et plastifiant) c) GAP pur d) Gpl pur e)Gap-Gpl Liste des tableaux Tableau 1...Composition des mailles amorphes construites 11 Tableau 2. Proprietes des polymeres et plastifiants utilises 11 Tableau 3. Comparaisons entre les Tt...obtenues experimentalement, les T% publiees dans les ecrits scientifiques et celles predites a partir des 7"gdes composes purs 19 Tableau 4. Comparaison

Mittelwert- und Arbeitstaktsynchrone Simulation von Dieselmotoren

NASA Astrophysics Data System (ADS)

Zahn, Sebastian

Getrieben durch die immer restriktiveren Anforderungen an das Emissions- und Verbrauchsverhalten moderner Verbrennungsmotoren steigt die Komplexität von Motormanagementsystemen mit jeder Modellgeneration an. Damit geht nicht nur eine Zunahme des Softwareumfangs von Steuergeräten sondern zugleich ein deutlicher Anstieg des Applikations-, Vermessungs- und Testaufwandes einher. Zur Effizienzsteigerung des Software- und Funktionsentwicklungsprozesses haben sich daher in der Automobilindustrie sowie in Forschungsinstituten verschiedene modell- und simulationsbasierte Methoden wie die Model-in-the-Loop (MiL) Simulation, die Software-in-the-Loop (SiL) Simulation, das Rapid Control Prototyping (RCP) sowie die Hardware-in-the-Loop (HiL) Simulation etabliert.

Federation Development and Execution Process (FEDEP) Tools in Support of NATO Modelling & Simulation (M&S) Programmes (Des outils d’aide au processus de d’eveloppement et d’execution de federations (FEDEP))

DTIC Science & Technology

2004-05-01

currently contains 79 tools and others should be added as they become known. Finally, the Task Group has recommended that the tool list be made available...approach and analysis. Conclusions and recommendations are contained in Chapter 5. RTO-TR-MSG-005 v Des outils d’aide au processus de développement...generation, Version 1.5 [A.3-1], was created in December 1999 and contained only minor editorial changes. RTO-TR-MSG-005 2 - 1 FEDEP With this

What We Did Last Summer: Depicting DES Data to Enhance Simulation Utility and Use

NASA Technical Reports Server (NTRS)

Elfrey, Priscilla; Conroy, Mike; Lagares, Jose G.; Mann, David; Fahmi, Mona

2009-01-01

At Kennedy Space Center (KSC), an important use of Discrete Event Simulation (DES) addresses ground operations .of missions to space. DES allows managers, scientists and engineers to assess the number of missions KSC can complete on a given schedule within different facilities, the effects of various configurations of resources and detect possible problems or unwanted situations. For fifteen years, DES has supported KSC efficiency, cost savings and improved safety and performance. The dense and abstract DES data, however, proves difficult to comprehend and, NASA managers realized, is subject to misinterpretation, misunderstanding and even, misuse. In summer 2008, KSC developed and implemented a NASA Exploration Systems Mission Directorate (ESMD) project based on the premise that visualization could enhance NASA's understanding and use of DES.

Estimating ICU bed capacity using discrete event simulation.

PubMed

Zhu, Zhecheng; Hen, Bee Hoon; Teow, Kiok Liang

2012-01-01

The intensive care unit (ICU) in a hospital caters for critically ill patients. The number of the ICU beds has a direct impact on many aspects of hospital performance. Lack of the ICU beds may cause ambulance diversion and surgery cancellation, while an excess of ICU beds may cause a waste of resources. This paper aims to develop a discrete event simulation (DES) model to help the healthcare service providers determine the proper ICU bed capacity which strikes the balance between service level and cost effectiveness. The DES model is developed to reflect the complex patient flow of the ICU system. Actual operational data, including emergency arrivals, elective arrivals and length of stay, are directly fed into the DES model to capture the variations in the system. The DES model is validated by open box test and black box test. The validated model is used to test two what-if scenarios which the healthcare service providers are interested in: the proper number of the ICU beds in service to meet the target rejection rate and the extra ICU beds in service needed to meet the demand growth. A 12-month period of actual operational data was collected from an ICU department with 13 ICU beds in service. Comparison between the simulation results and the actual situation shows that the DES model accurately captures the variations in the system, and the DES model is flexible to simulate various what-if scenarios. DES helps the healthcare service providers describe the current situation, and simulate the what-if scenarios for future planning.

Young-Person's Guide to Detached-Eddy Simulation Grids

NASA Technical Reports Server (NTRS)

Spalart, Philippe R.; Streett, Craig (Technical Monitor)

2001-01-01

We give the "philosophy", fairly complete instructions, a sketch and examples of creating Detached-Eddy Simulation (DES) grids from simple to elaborate, with a priority on external flows. Although DES is not a zonal method, flow regions with widely different gridding requirements emerge, and should be accommodated as far as possible if a good use of grid points is to be made. This is not unique to DES. We brush on the time-step choice, on simple pitfalls, and on tools to estimate whether a simulation is well resolved.

Vents stellaires chauds et nébuleuses éjectées des étoiles chaudes: nécessaire inclusion des phénomènes radiatifs dans les simulations hydrodynamiques

NASA Astrophysics Data System (ADS)

Grosdidier, Y.; Garcia-Segura, G.; Acker, A.; Moffat, A. F. J.

Nous décrivons, à l'instar de la formation et de l'évolution des nébuleuses planétaires, comment l'histoire des vents stellaires issus d'une même étoile chaude (massive ou non) détermine la morphologie des nébuleuses éjectées. Ensuite, nous présentons sommairement la structure et la dynamique des vents accélérés radiativement au sein des étoiles massives (O, Wolf-Rayet) et des étoiles centrales de nébuleuses planétaires de type [WC]. Enfin, nous tâchong d'illustrer en quoi la prise en compte des phénomènes radiatifs est nécessaire pour effectuer toute simulation hydrodynamique sensée reproduire les observations dans les deux contextes, i.e. les vents stellaires chauds eux-mêmes, la persistance de surdensités en leur sein, et les nébuleuses éjectées qui en résultent.

Detached Eddy Simulation of Flap Side-Edge Flow

NASA Technical Reports Server (NTRS)

Balakrishnan, Shankar K.; Shariff, Karim R.

2016-01-01

Detached Eddy Simulation (DES) of flap side-edge flow was performed with a wing and half-span flap configuration used in previous experimental and numerical studies. The focus of the study is the unsteady flow features responsible for the production of far-field noise. The simulation was performed at a Reynolds number (based on the main wing chord) of 3.7 million. Reynolds Averaged Navier-Stokes (RANS) simulations were performed as a precursor to the DES. The results of these precursor simulations match previous experimental and RANS results closely. Although the present DES simulations have not reached statistical stationary yet, some unsteady features of the developing flap side-edge flowfield are presented. In the final paper it is expected that statistically stationary results will be presented including comparisons of surface pressure spectra with experimental data.

Modeling Clinical Outcomes in Prostate Cancer: Application and Validation of the Discrete Event Simulation Approach.

PubMed

Pan, Feng; Reifsnider, Odette; Zheng, Ying; Proskorovsky, Irina; Li, Tracy; He, Jianming; Sorensen, Sonja V

2018-04-01

Treatment landscape in prostate cancer has changed dramatically with the emergence of new medicines in the past few years. The traditional survival partition model (SPM) cannot accurately predict long-term clinical outcomes because it is limited by its ability to capture the key consequences associated with this changing treatment paradigm. The objective of this study was to introduce and validate a discrete-event simulation (DES) model for prostate cancer. A DES model was developed to simulate overall survival (OS) and other clinical outcomes based on patient characteristics, treatment received, and disease progression history. We tested and validated this model with clinical trial data from the abiraterone acetate phase III trial (COU-AA-302). The model was constructed with interim data (55% death) and validated with the final data (96% death). Predicted OS values were also compared with those from the SPM. The DES model's predicted time to chemotherapy and OS are highly consistent with the final observed data. The model accurately predicts the OS hazard ratio from the final data cut (predicted: 0.74; 95% confidence interval [CI] 0.64-0.85 and final actual: 0.74; 95% CI 0.6-0.88). The log-rank test to compare the observed and predicted OS curves indicated no statistically significant difference between observed and predicted curves. However, the predictions from the SPM based on interim data deviated significantly from the final data. Our study showed that a DES model with properly developed risk equations presents considerable improvements to the more traditional SPM in flexibility and predictive accuracy of long-term outcomes. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Markov modeling and discrete event simulation in health care: a systematic comparison.

PubMed

Standfield, Lachlan; Comans, Tracy; Scuffham, Paul

2014-04-01

The aim of this study was to assess if the use of Markov modeling (MM) or discrete event simulation (DES) for cost-effectiveness analysis (CEA) may alter healthcare resource allocation decisions. A systematic literature search and review of empirical and non-empirical studies comparing MM and DES techniques used in the CEA of healthcare technologies was conducted. Twenty-two pertinent publications were identified. Two publications compared MM and DES models empirically, one presented a conceptual DES and MM, two described a DES consensus guideline, and seventeen drew comparisons between MM and DES through the authors' experience. The primary advantages described for DES over MM were the ability to model queuing for limited resources, capture individual patient histories, accommodate complexity and uncertainty, represent time flexibly, model competing risks, and accommodate multiple events simultaneously. The disadvantages of DES over MM were the potential for model overspecification, increased data requirements, specialized expensive software, and increased model development, validation, and computational time. Where individual patient history is an important driver of future events an individual patient simulation technique like DES may be preferred over MM. Where supply shortages, subsequent queuing, and diversion of patients through other pathways in the healthcare system are likely to be drivers of cost-effectiveness, DES modeling methods may provide decision makers with more accurate information on which to base resource allocation decisions. Where these are not major features of the cost-effectiveness question, MM remains an efficient, easily validated, parsimonious, and accurate method of determining the cost-effectiveness of new healthcare interventions.

Using the Integration of Discrete Event and Agent-Based Simulation to Enhance Outpatient Service Quality in an Orthopedic Department.

PubMed

Kittipittayakorn, Cholada; Ying, Kuo-Ching

2016-01-01

Many hospitals are currently paying more attention to patient satisfaction since it is an important service quality index. Many Asian countries' healthcare systems have a mixed-type registration, accepting both walk-in patients and scheduled patients. This complex registration system causes a long patient waiting time in outpatient clinics. Different approaches have been proposed to reduce the waiting time. This study uses the integration of discrete event simulation (DES) and agent-based simulation (ABS) to improve patient waiting time and is the first attempt to apply this approach to solve this key problem faced by orthopedic departments. From the data collected, patient behaviors are modeled and incorporated into a massive agent-based simulation. The proposed approach is an aid for analyzing and modifying orthopedic department processes, allows us to consider far more details, and provides more reliable results. After applying the proposed approach, the total waiting time of the orthopedic department fell from 1246.39 minutes to 847.21 minutes. Thus, using the correct simulation model significantly reduces patient waiting time in an orthopedic department.

Using the Integration of Discrete Event and Agent-Based Simulation to Enhance Outpatient Service Quality in an Orthopedic Department

PubMed Central

Kittipittayakorn, Cholada

2016-01-01

Many hospitals are currently paying more attention to patient satisfaction since it is an important service quality index. Many Asian countries' healthcare systems have a mixed-type registration, accepting both walk-in patients and scheduled patients. This complex registration system causes a long patient waiting time in outpatient clinics. Different approaches have been proposed to reduce the waiting time. This study uses the integration of discrete event simulation (DES) and agent-based simulation (ABS) to improve patient waiting time and is the first attempt to apply this approach to solve this key problem faced by orthopedic departments. From the data collected, patient behaviors are modeled and incorporated into a massive agent-based simulation. The proposed approach is an aid for analyzing and modifying orthopedic department processes, allows us to consider far more details, and provides more reliable results. After applying the proposed approach, the total waiting time of the orthopedic department fell from 1246.39 minutes to 847.21 minutes. Thus, using the correct simulation model significantly reduces patient waiting time in an orthopedic department. PMID:27195606

Extended hierarchical solvent perturbations from curved surfaces of mesoporous silica particles in a deep eutectic solvent.

PubMed

Hammons, Joshua A; Zhang, Fan; Ilavsky, Jan

2018-06-15

Many applications of deep eutectic solvents (DES) rely on exploitation of their unique yet complex liquid structures. Due to the ionic nature of the DES components, their diffuse structures are perturbed in the presence of a charged surface. We hypothesize that it is possible to perturb the bulk DES structure far (>100 nm) from a curved, charged surface with mesoscopic dimensions. We performed in situ, synchrotron-based ultra-small angle X-ray scattering (USAXS) experiments to study the solvent distribution near the surface of charged mesoporous silica particles (MPS) (≈0.5 µm in diameter) suspended in both water and a common type of DES (1:2 choline Cl-:ethylene glycol). A careful USAXS analysis reveals that the perturbation of electron density distribution within the DES extends ≈1 μm beyond the particle surface, and that this perturbation can be manipulated by the addition of salt ions (AgCl). The concentration of the pore-filling fluid is greatly reduced in the DES. Notably, we extracted the real-space structures of these fluctuations from the USAXS data using a simulated annealing approach that does not require a priori knowledge about the scattering form factor, and can be generalized to a wide range of complex small-angle scattering problems. Copyright © 2018 Elsevier Inc. All rights reserved.

Conceptual Modeling (CM) for Military Modeling and Simulation (M&S) (Modelisation conceptuelle (MC) pour la modelisation et la simulation (M&S) militaires)

DTIC Science & Technology

2012-07-01

du monde de la modélisation et de la simulation et lui fournir des directives de mise en œuvre ; et fournir des ...définition ; rapports avec les normes ; spécification de procédure de gestion de la MC ; spécification d’artefact de MC. Considérations importantes...utilisant la présente directive comme référence. • Les VV&A (vérification, validation et acceptation) des MC doivent faire partie intégrante du

Simulation Interoperability (Interoperabilite de la simulation)

DTIC Science & Technology

2015-01-01

du NMSG pour étudier l’interopérabilité de la simulation. L’ET-027 a identifié 63 problèmes qui limitent fortement l’interopérabilité de la simulation...l’automatisation relative du développement, de l’intégration et de la mise en œuvre des environnements de simulation distribuée. Cela exige une...normalisation des applicatifs créés pendant le développement d’un environnement de simulation, à la suite, par exemple, du

Detached eddy simulation for turbulent fluid-structure interaction of moving bodies using the constraint-based immersed boundary method

NASA Astrophysics Data System (ADS)

Nangia, Nishant; Bhalla, Amneet P. S.; Griffith, Boyce E.; Patankar, Neelesh A.

2016-11-01

Flows over bodies of industrial importance often contain both an attached boundary layer region near the structure and a region of massively separated flow near its trailing edge. When simulating these flows with turbulence modeling, the Reynolds-averaged Navier-Stokes (RANS) approach is more efficient in the former, whereas large-eddy simulation (LES) is more accurate in the latter. Detached-eddy simulation (DES), based on the Spalart-Allmaras model, is a hybrid method that switches from RANS mode of solution in attached boundary layers to LES in detached flow regions. Simulations of turbulent flows over moving structures on a body-fitted mesh incur an enormous remeshing cost every time step. The constraint-based immersed boundary (cIB) method eliminates this operation by placing the structure on a Cartesian mesh and enforcing a rigidity constraint as an additional forcing in the Navier-Stokes momentum equation. We outline the formulation and development of a parallel DES-cIB method using adaptive mesh refinement. We show preliminary validation results for flows past stationary bodies with both attached and separated boundary layers along with results for turbulent flows past moving bodies. This work is supported by the National Science Foundation Graduate Research Fellowship under Grant No. DGE-1324585.

Francis-99 turbine numerical flow simulation of steady state operation using RANS and RANS/LES turbulence model

NASA Astrophysics Data System (ADS)

Minakov, A.; Platonov, D.; Sentyabov, A.; Gavrilov, A.

2017-01-01

We performed numerical simulation of flow in a laboratory model of a Francis hydroturbine at three regimes, using two eddy-viscosity- (EVM) and a Reynolds stress (RSM) RANS models (realizable k-ɛ, k-ω SST, LRR) and detached-eddy-simulations (DES), as well as large-eddy simulations (LES). Comparison of calculation results with the experimental data was carried out. Unlike the linear EVMs, the RSM, DES, and LES reproduced well the mean velocity components, and pressure pulsations in the diffusor draft tube. Despite relatively coarse meshes and insufficient resolution of the near-wall region, LES, DES also reproduced well the intrinsic flow unsteadiness and the dominant flow structures and the associated pressure pulsations in the draft tube.

Research Using In Vivo Simulation of Meta-Organizational Shared Decision Making (SDM). Task 2: Development of an Experimental Plan for In Vivo Exercise and Simulation

DTIC Science & Technology

2011-12-01

la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale, 2011 DRDC CSS CR 2011-31 ii...participants. Résumé …..... Introduction : Ce rapport présente la Tâche 2 du projet « Recherche par la simulation in-vivo sur la prise de décision partagée...environnement sur la prise de décision partagée in-vivo des opérations de gestion des urgences et pour colliger des données

Detached Eddy Simulations of Hypersonic Transition

NASA Technical Reports Server (NTRS)

Yoon, S.; Barnhardt, M.; Candler, G.

2010-01-01

This slide presentation reviews the use of Detached Eddy Simulation (DES) of hypersonic transistion. The objective of the study was to investigate the feasibility of using CFD in general, DES in particular, for prediction of roughness-induced boundary layer transition to turbulence and the resulting increase in heat transfer.

Simulation of patient flow in multiple healthcare units using process and data mining techniques for model identification.

PubMed

Kovalchuk, Sergey V; Funkner, Anastasia A; Metsker, Oleg G; Yakovlev, Aleksey N

2018-06-01

An approach to building a hybrid simulation of patient flow is introduced with a combination of data-driven methods for automation of model identification. The approach is described with a conceptual framework and basic methods for combination of different techniques. The implementation of the proposed approach for simulation of the acute coronary syndrome (ACS) was developed and used in an experimental study. A combination of data, text, process mining techniques, and machine learning approaches for the analysis of electronic health records (EHRs) with discrete-event simulation (DES) and queueing theory for the simulation of patient flow was proposed. The performed analysis of EHRs for ACS patients enabled identification of several classes of clinical pathways (CPs) which were used to implement a more realistic simulation of the patient flow. The developed solution was implemented using Python libraries (SimPy, SciPy, and others). The proposed approach enables more a realistic and detailed simulation of the patient flow within a group of related departments. An experimental study shows an improved simulation of patient length of stay for ACS patient flow obtained from EHRs in Almazov National Medical Research Centre in Saint Petersburg, Russia. The proposed approach, methods, and solutions provide a conceptual, methodological, and programming framework for the implementation of a simulation of complex and diverse scenarios within a flow of patients for different purposes: decision making, training, management optimization, and others. Copyright © 2018 Elsevier Inc. All rights reserved.

Simulating Mission Command for Planning and Analysis

DTIC Science & Technology

2015-06-01

mission plan. 14. SUBJECT TERMS Mission Planning, CPM , PERT, Simulation, DES, Simkit, Triangle Distribution, Critical Path 15. NUMBER OF...Battalion Task Force CO Company CPM Critical Path Method DES Discrete Event Simulation FA BAT Field Artillery Battalion FEL Future Event List FIST...management tools that can be utilized to find the critical path in military projects. These are the Critical Path Method ( CPM ) and the Program Evaluation and

Managing resource capacity using hybrid simulation

NASA Astrophysics Data System (ADS)

Ahmad, Norazura; Ghani, Noraida Abdul; Kamil, Anton Abdulbasah; Tahar, Razman Mat

2014-12-01

Due to the diversity of patient flows and interdependency of the emergency department (ED) with other units in hospital, the use of analytical models seems not practical for ED modeling. One effective approach to study the dynamic complexity of ED problems is by developing a computer simulation model that could be used to understand the structure and behavior of the system. Attempts to build a holistic model using DES only will be too complex while if only using SD will lack the detailed characteristics of the system. This paper discusses the combination of DES and SD in order to get a better representation of the actual system than using either modeling paradigm solely. The model is developed using AnyLogic software that will enable us to study patient flows and the complex interactions among hospital resources for ED operations. Results from the model show that patients' length of stay is influenced by laboratories turnaround time, bed occupancy rate and ward admission rate.

High-Lift System Aerodynamics (L’Aerodynamique des Systems Hypersustentateurs)

DTIC Science & Technology

1993-09-01

les kcouleinents incoinpressibles sur les profils L -a pr~sente m~thode num~rique montre que la simulation multi-corps, qui est un...de l ’&oulement du d𔄀chelle de discrdtisation, d’origine physique, introduit des m~me ordre que l ’~paisseur des couches limites sur le point de...hypersustentateurs. Enfin, les consequences des exigences de furtivite sur la forme des aeronefs - c’est it dire la creation de configurations telles que

Hydrodynamic Drag Reduction

DTIC Science & Technology

2015-04-01

Computational Engineering unstructured RANS/LES/DES solver , Tenasi, was used to predict drag and simulate the free surface flow around the ACV over a...using a second-order accurate Roe approximate Riemann scheme, while viscous fluxes are evaluated using a second-order directional derivative approach...Predictions of rigid body ship motions for the SI75 container ship in incident waves and methodology for a one-way coupling of the Tenasi flow solver

DISCRETE EVENT SIMULATION OF OPTICAL SWITCH MATRIX PERFORMANCE IN COMPUTER NETWORKS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Imam, Neena; Poole, Stephen W

2013-01-01

In this paper, we present application of a Discrete Event Simulator (DES) for performance modeling of optical switching devices in computer networks. Network simulators are valuable tools in situations where one cannot investigate the system directly. This situation may arise if the system under study does not exist yet or the cost of studying the system directly is prohibitive. Most available network simulators are based on the paradigm of discrete-event-based simulation. As computer networks become increasingly larger and more complex, sophisticated DES tool chains have become available for both commercial and academic research. Some well-known simulators are NS2, NS3, OPNET,more » and OMNEST. For this research, we have applied OMNEST for the purpose of simulating multi-wavelength performance of optical switch matrices in computer interconnection networks. Our results suggest that the application of DES to computer interconnection networks provides valuable insight in device performance and aids in topology and system optimization.« less

Techniques d'inspection par ondes guidees ultrasonores d'assemblages brases dans des reacteurs aeronautiques =

NASA Astrophysics Data System (ADS)

Comot, Pierre

L'industrie aeronautique, cherche a etudier la possibilite d'utiliser de maniere structurelle des joints brases, dans une optique de reduction de poids et de cout. Le developpement d'une methode d'evaluation rapide, fiable et peu couteuse pour evaluer l'integrite structurelle des joints apparait donc indispensable. La resistance mecanique d'un joint brase dependant principalement de la quantite de phase fragile dans sa microstructure. Les ondes guidees ultrasonores permettent de detecter ce type de phase lorsqu'elles sont couplees a une mesure spatio-temporelle. De plus la nature de ce type d'ondes permet l'inspection de joints ayant des formes complexes. Ce memoire se concentre donc sur le developpement d'une technique basee sur l'utilisation d'ondes guidees ultrasonores pour l'inspection de joints brases a recouvrement d'Inconel 625 avec comme metal d'apport du BNi-2. Dans un premiers temps un modele elements finis du joint a ete utilise pour simuler la propagation des ultrasons et optimiser les parametres d'inspection, la simulation a permis egalement de demontrer la faisabilite de la technique pour la detection de la quantite de phase fragile dans ce type de joints. Les parametres optimises sont la forme de signal d'excitation, sa frequence centrale et la direction d'excitation. Les simulations ont montre que l'energie de l'onde ultrasonore transmise a travers le joint aussi bien que celle reflechie, toutes deux extraites des courbes de dispersion, etaient proportionnelles a la quantite de phase fragile presente dans le joint et donc cette methode permet d'identifier la presence ou non d'une phase fragile dans ce type de joint. Ensuite des experimentations ont ete menees sur trois echantillons typiques presentant differentes quantites de phase fragile dans le joint, pour obtenir ce type d'echantillons differents temps de brasage ont ete utilises (1, 60 et 180 min). Pour cela un banc d'essai automatise a ete developpe permettant d'effectuer une analyse similaire a celle utilisee en simulation. Les parametres experimentaux ayant ete choisis en accord avec l'optimisation effectuee lors des simulations et apres une premiere optimisation du procede experimental. Finalement les resultats experimentaux confirment les resultats obtenus en simulation, et demontrent le potentiel de la methode developpee.

Mission Assignment Model and Simulation Tool for Different Types of Unmanned Aerial Vehicles

DTIC Science & Technology

2008-09-01

TABLE OF ABBREVIATIONS AND ACRONYMS AAA Anti Aircraft Artillery ATO Air Tasking Order BDA Battle Damage Assessment DES Discrete Event Simulation...clock is advanced in small, fixed time steps. Since the value of simulated time is important in DES , an internal variable, called as simulation clock...VEHICLES Yücel Alver Captain, Turkish Air Force B.S., Turkish Air Force Academy, 2000 Murat Özdoğan 1st Lieutenant, Turkish Air Force B.S., Turkish

Ship Dynamics Identification Using Simulator and Sea Trial Data

DTIC Science & Technology

2002-04-29

Committee "© Her Majesty the Queen as represented by the Minister of National Defence, 2002 "© Sa majest6 la reine, repr~sent~e par le ministre de la...cotes d’instructeurs. Le but du present rapport est de ddterminer la nature de la dynamique des navires virtuels et r6els de mani&re A ce que des...la dynamique du navire. Le pr6sent document pr6cise la dynamique du navire pour un navire de classe Bay des FC, ainsi que pour un navire simul6. Les

Reduction of Military Vehicle Acquisition Time and Cost through Advanced Modelling and Virtual Simulation (La reduction des couts et des delais d’acquisition des vehicules militaires par la modelisation avancee et la simulation de produit virtuel)

DTIC Science & Technology

2003-03-01

nations, a very thorough examination of current practices. Introduction The Applied Vehicle Technology Panel (AVT) of the Research and Technology...the introduction of new information generated by computer codes required it to be timely and presented in appropriate fashion so that it could...military competition between the NATO allies and the Soviet Union. The second was the introduction of commercial, high capacity transonic aircraft and

An Investigation of Transonic Resonance in a Mach 2.2 Round Convergent-Divergent Nozzle

NASA Technical Reports Server (NTRS)

Dippold, Vance F., III; Zaman, Khairul B. M. Q.

2015-01-01

Hot-wire and acoustic measurements were taken for a round convergent nozzle and a round convergent-divergent (C-D) nozzle at a jet Mach number of 0.61. The C-D nozzle had a design Mach number of 2.2. Compared to the convergent nozzle jet flow, the Mach 2.2 nozzle jet flow produced excess broadband noise (EBBN). It also produced a transonic resonance tone at 1200 Herz. Computational simulations were performed for both nozzle flows. A steady Reynolds-Averaged Navier-Stokes simulation was performed for the convergent nozzle jet flow. For the Mach 2.2 nozzle flow, a steady RANS simulation, an unsteady RANS (URANS) simulation, and an unsteady Detached Eddy Simulation (DES) were performed. The RANS simulation of the convergent nozzle showed good agreement with the hot-wire velocity and turbulence measurements, though the decay of the potential core was over-predicted. The RANS simulation of the Mach 2.2 nozzle showed poor agreement with the experimental data, and more closely resembled an ideally-expanded jet. The URANS simulation also showed qualitative agreement with the hot-wire data, but predicted a transonic resonance at 1145 Herz. The DES showed good agreement with the hot-wire velocity and turbulence data. The DES also produced a transonic tone at 1135 Herz. The DES solution showed that the destabilization of the shock-induced separation region inside the nozzle produced increased levels of turbulence intensity. This is likely the source of the EBBN.

Incorporating discrete event simulation into quality improvement efforts in health care systems.

PubMed

Rutberg, Matthew Harris; Wenczel, Sharon; Devaney, John; Goldlust, Eric Jonathan; Day, Theodore Eugene

2015-01-01

Quality improvement (QI) efforts are an indispensable aspect of health care delivery, particularly in an environment of increasing financial and regulatory pressures. The ability to test predictions of proposed changes to flow, policy, staffing, and other process-level changes using discrete event simulation (DES) has shown significant promise and is well reported in the literature. This article describes how to incorporate DES into QI departments and programs in order to support QI efforts, develop high-fidelity simulation models, conduct experiments, make recommendations, and support adoption of results. The authors describe how DES-enabled QI teams can partner with clinical services and administration to plan, conduct, and sustain QI investigations. © 2013 by the American College of Medical Quality.

Real & Simulated IFU Observations of Low-Mass Early-Type Galaxies: Environmental Influence Probed for Cluster Galaxies

NASA Astrophysics Data System (ADS)

Sybilska, Agnieszka; Łokas, Ewa Luiza; Fouquet, Sylvain

2017-03-01

We combine high-quality IFU data with a new set of numerical simulations to study low-mass early type galaxies (dEs) in dense environments. Our earlier study of dEs in the Virgo cluster has produced the first large-scale maps of kinematic and stellar population properties of dEs in those environments (Ryś et al. 2013, 2014, 2015). A quantitative discrimination between various (trans)formation processes proposed for these objects is, however, a complex issue, requiring a priori assumptions about the progenitors of galaxies we observe and study today. To bridge this gap between observations and theoretical predictions, we use the expertise gained in the IFU data analysis to look ``through the eye of SAURON'' at our new suite of high-resolution N-body simulations of dEs in the Virgo cluster. Mimicking the observers perspective as closely as possible, we can also indicate the existing instrumental and viewer limitations regarding what we are/are not able to detect as observers.

Modeling and Simulation at NASA

NASA Technical Reports Server (NTRS)

Steele, Martin J.

2009-01-01

This slide presentation is composed of two topics. The first reviews the use of modeling and simulation (M&S) particularly as it relates to the Constellation program and discrete event simulation (DES). DES is defined as a process and system analysis, through time-based and resource constrained probabilistic simulation models, that provide insight into operation system performance. The DES shows that the cycles for a launch from manufacturing and assembly to launch and recovery is about 45 days and that approximately 4 launches per year are practicable. The second topic reviews a NASA Standard for Modeling and Simulation. The Columbia Accident Investigation Board made some recommendations related to models and simulations. Some of the ideas inherent in the new standard are the documentation of M&S activities, an assessment of the credibility, and reporting to decision makers, which should include the analysis of the results, a statement as to the uncertainty in the results,and the credibility of the results. There is also discussion about verification and validation (V&V) of models. There is also discussion about the different types of models and simulation.

Simulating an emergency department: the importance of modeling the interactions between physicians and delegates in a discrete event simulation.

PubMed

Lim, Morgan E; Worster, Andrew; Goeree, Ron; Tarride, Jean-Éric

2013-05-22

Computer simulation studies of the emergency department (ED) are often patient driven and consider the physician as a human resource whose primary activity is interacting directly with the patient. In many EDs, physicians supervise delegates such as residents, physician assistants and nurse practitioners each with different skill sets and levels of independence. The purpose of this study is to present an alternative approach where physicians and their delegates in the ED are modeled as interacting pseudo-agents in a discrete event simulation (DES) and to compare it with the traditional approach ignoring such interactions. The new approach models a hierarchy of heterogeneous interacting pseudo-agents in a DES, where pseudo-agents are entities with embedded decision logic. The pseudo-agents represent a physician and delegate, where the physician plays a senior role to the delegate (i.e. treats high acuity patients and acts as a consult for the delegate). A simple model without the complexity of the ED is first created in order to validate the building blocks (programming) used to create the pseudo-agents and their interaction (i.e. consultation). Following validation, the new approach is implemented in an ED model using data from an Ontario hospital. Outputs from this model are compared with outputs from the ED model without the interacting pseudo-agents. They are compared based on physician and delegate utilization, patient waiting time for treatment, and average length of stay. Additionally, we conduct sensitivity analyses on key parameters in the model. In the hospital ED model, comparisons between the approach with interaction and without showed physician utilization increase from 23% to 41% and delegate utilization increase from 56% to 71%. Results show statistically significant mean time differences for low acuity patients between models. Interaction time between physician and delegate results in increased ED length of stay and longer waits for beds. This example shows the importance of accurately modeling physician relationships and the roles in which they treat patients. Neglecting these relationships could lead to inefficient resource allocation due to inaccurate estimates of physician and delegate time spent on patient related activities and length of stay.

Integrated health management and control of complex dynamical systems

NASA Astrophysics Data System (ADS)

Tolani, Devendra K.

2005-11-01

A comprehensive control and health management strategy for human-engineered complex dynamical systems is formulated for achieving high performance and reliability over a wide range of operation. Results from diverse research areas such as Probabilistic Robust Control (PRC), Damage Mitigating/Life Extending Control (DMC), Discrete Event Supervisory (DES) Control, Symbolic Time Series Analysis (STSA) and Health and Usage Monitoring System (HUMS) have been employed to achieve this goal. Continuous-domain control modules at the lower level are synthesized by PRC and DMC theories, whereas the upper-level supervision is based on DES control theory. In the PRC approach, by allowing different levels of risk under different flight conditions, the control system can achieve the desired trade off between stability robustness and nominal performance. In the DMC approach, component damage is incorporated in the control law to reduce the damage rate for enhanced structural durability. The DES controller monitors the system performance and, based on the mission requirements (e.g., performance metrics and level of damage mitigation), switches among various lower-level controllers. The core idea is to design a framework where the DES controller at the upper-level, mimics human intelligence and makes appropriate decisions to satisfy mission requirements, enhance system performance and structural durability. Recently developed tools in STSA have been used for anomaly detection and failure prognosis. The DMC deals with the usage monitoring or operational control part of health management, where as the issue of health monitoring is addressed by the anomaly detection tools. The proposed decision and control architecture has been validated on two test-beds, simulating the operations of rotorcraft dynamics and aircraft propulsion.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perkins, Casey J.; Brigantic, Robert T.; Keating, Douglas H.

There is a need to develop and demonstrate technical approaches for verifying potential future agreements to limit and reduce total warhead stockpiles. To facilitate this aim, warhead monitoring systems employ both concepts of operations (CONOPS) and technologies. A systems evaluation approach can be used to assess the relative performance of CONOPS and technologies in their ability to achieve monitoring system objectives which include: 1) confidence that a treaty accountable item (TAI) initialized by the monitoring system is as declared; 2) confidence that there is no undetected diversion from the monitoring system; and 3) confidence that a TAI is dismantled asmore » declared. Although there are many quantitative methods that can be used to assess system performance for the above objectives, this paper focuses on a simulation perspective primarily for the ability to support analysis of the probabilities that are used to define operating characteristics of CONOPS and technologies. This paper describes a discrete event simulation (DES) model, comprised of three major sub-models: including TAI lifecycle flow, monitoring activities, and declaration behavior. The DES model seeks to capture all processes and decision points associated with the progressions of virtual TAIs, with notional characteristics, through the monitoring system from initialization through dismantlement. The simulation updates TAI progression (i.e., whether the generated test objects are accepted and rejected at the appropriate points) all the way through dismantlement. Evaluation of TAI lifecycles primarily serves to assess how the order, frequency, and combination of functions in the CONOPS affect system performance as a whole. It is important, however, to note that discrete event simulation is also capable (at a basic level) of addressing vulnerabilities in the CONOPS and interdependencies between individual functions as well. This approach is beneficial because it does not rely on complex mathematical models, but instead attempts to recreate the real world system as a decision and event driven simulation. Finally, because the simulation addresses warhead confirmation, chain of custody, and warhead dismantlement in a modular fashion, a discrete-event model could be easily adapted to multiple CONOPS for the exploration of a large number of “what if” scenarios.« less

Performance Prediction and Simulation of Gas Turbine Engine Operation (La presision des performances et la simulation du fonctionnement des turbomoteurs)

DTIC Science & Technology

2002-04-01

configuration associated with the HSCT program was analyzed in terms of inlet unstart and the effect of the regurgitated shock wave. Inlet start is a...heavily loaded take off or dog -fight phases of flight. Less critical issues, such as thrust loss during supersonic operations, may also appear. From the

Un accumulateur echangeur de chaleur hybride pour la gestion simultanee des energies solaire et electrique

NASA Astrophysics Data System (ADS)

Ait Hammou, Zouhair

Cette etude porte sur la conception d'un accumulateur echangeur de chaleur hybride (AECH) pour la gestion simultanee des energies solaire et electrique. Un modele mathematique reposant sur les equations de conservation de la quantite d'energie est expose. Il est developpe pour tester differents materiaux de stockage, entre autres, les materiaux a changement de phase (solide/liquide) et les materiaux de stockage sensible. Un code de calcul est mis en eeuvre sur ordinateur, puis valide a l'aide des resultats analytiques et numeriques de la litterature. En parallele, un prototype experimental a echelle reduite est concu au laboratoire afin de valider le code de calcul. Des simulations sont effectuees pour etudier les effets des parametres de conception et des materiaux de stockage sur le comportement thermique de l'AECH et sur la consommation d'energie electrique. Les resultats des simulations sur quatre mois d'hiver montrent que la paraffine n-octadecane et l'acide caprique sont deux candidats souhaitables pour le stockage d'energie destine au chauffage des habitats. L'utilisation de ces deux materiaux dans l'AECH permet de reduire la consommation d'energie electrique de 32% et d'aplanir le probleme de pointe electrique puisque 90% de l'energie electrique est consommee durant les heures creuses. En plus, en adoptant un tarif preferentiel, le calcul des couts lies a la consommation d'energie electrique montre que le consommateur adoptant ce systeme beneficie d'une reduction de 50% de la facture d'electricite.

An empirical comparison of Markov cohort modeling and discrete event simulation in a capacity-constrained health care setting.

PubMed

Standfield, L B; Comans, T A; Scuffham, P A

2017-01-01

To empirically compare Markov cohort modeling (MM) and discrete event simulation (DES) with and without dynamic queuing (DQ) for cost-effectiveness (CE) analysis of a novel method of health services delivery where capacity constraints predominate. A common data-set comparing usual orthopedic care (UC) to an orthopedic physiotherapy screening clinic and multidisciplinary treatment service (OPSC) was used to develop a MM and a DES without (DES-no-DQ) and with DQ (DES-DQ). Model results were then compared in detail. The MM predicted an incremental CE ratio (ICER) of $495 per additional quality-adjusted life-year (QALY) for OPSC over UC. The DES-no-DQ showed OPSC dominating UC; the DES-DQ generated an ICER of $2342 per QALY. The MM and DES-no-DQ ICER estimates differed due to the MM having implicit delays built into its structure as a result of having fixed cycle lengths, which are not a feature of DES. The non-DQ models assume that queues are at a steady state. Conversely, queues in the DES-DQ develop flexibly with supply and demand for resources, in this case, leading to different estimates of resource use and CE. The choice of MM or DES (with or without DQ) would not alter the reimbursement of OPSC as it was highly cost-effective compared to UC in all analyses. However, the modeling method may influence decisions where ICERs are closer to the CE acceptability threshold, or where capacity constraints and DQ are important features of the system. In these cases, DES-DQ would be the preferred modeling technique to avoid incorrect resource allocation decisions.

Statistical and Probabilistic Extensions to Ground Operations' Discrete Event Simulation Modeling

NASA Technical Reports Server (NTRS)

Trocine, Linda; Cummings, Nicholas H.; Bazzana, Ashley M.; Rychlik, Nathan; LeCroy, Kenneth L.; Cates, Grant R.

2010-01-01

NASA's human exploration initiatives will invest in technologies, public/private partnerships, and infrastructure, paving the way for the expansion of human civilization into the solar system and beyond. As it is has been for the past half century, the Kennedy Space Center will be the embarkation point for humankind's journey into the cosmos. Functioning as a next generation space launch complex, Kennedy's launch pads, integration facilities, processing areas, launch and recovery ranges will bustle with the activities of the world's space transportation providers. In developing this complex, KSC teams work through the potential operational scenarios: conducting trade studies, planning and budgeting for expensive and limited resources, and simulating alternative operational schemes. Numerous tools, among them discrete event simulation (DES), were matured during the Constellation Program to conduct such analyses with the purpose of optimizing the launch complex for maximum efficiency, safety, and flexibility while minimizing life cycle costs. Discrete event simulation is a computer-based modeling technique for complex and dynamic systems where the state of the system changes at discrete points in time and whose inputs may include random variables. DES is used to assess timelines and throughput, and to support operability studies and contingency analyses. It is applicable to any space launch campaign and informs decision-makers of the effects of varying numbers of expensive resources and the impact of off nominal scenarios on measures of performance. In order to develop representative DES models, methods were adopted, exploited, or created to extend traditional uses of DES. The Delphi method was adopted and utilized for task duration estimation. DES software was exploited for probabilistic event variation. A roll-up process was used, which was developed to reuse models and model elements in other less - detailed models. The DES team continues to innovate and expand DES capabilities to address KSC's planning needs.

Simulation d'ecoulements internes compressibles laminaires et turbulents par une methode d'elements finis

NASA Astrophysics Data System (ADS)

Rebaine, Ali

1997-08-01

Ce travail consiste en la simulation numerique des ecoulements internes compressibles bidimensionnels laminaires et turbulents. On s'interesse, particulierement, aux ecoulements dans les ejecteurs supersoniques. Les equations de Navier-Stokes sont formulees sous forme conservative et utilisent, comme variables independantes, les variables dites enthalpiques a savoir: la pression statique, la quantite de mouvement et l'enthalpie totale specifique. Une formulation variationnelle stable des equations de Navier-Stokes est utilisee. Elle est base sur la methode SUPG (Streamline Upwinding Petrov Galerkin) et utilise un operateur de capture des forts gradients. Un modele de turbulence, pour la simulation des ecoulements dans les ejecteurs, est mis au point. Il consiste a separer deux regions distinctes: une region proche de la paroi solide, ou le modele de Baldwin et Lomax est utilise et l'autre, loin de la paroi, ou une formulation nouvelle, basee sur le modele de Schlichting pour les jets, est proposee. Une technique de calcul de la viscosite turbulente, sur un maillage non structure, est implementee. La discretisation dans l'espace de la forme variationnelle est faite a l'aide de la methode des elements finis en utilisant une approximation mixte: quadratique pour les composantes de la quantite de mouvement et de la vitesse et lineaire pour le reste des variables. La discretisation temporelle est effectuee par une methode de differences finies en utilisant le schema d'Euler implicite. Le systeme matriciel, resultant de la discretisation spatio-temporelle, est resolu a l'aide de l'algorithme GMRES en utilisant un preconditionneur diagonal. Les validations numeriques ont ete menees sur plusieurs types de tuyeres et ejecteurs. La principale validation consiste en la simulation de l'ecoulement dans l'ejecteur teste au centre de recherche NASA Lewis. Les resultats obtenus sont tres comparables avec ceux des travaux anterieurs et sont nettement superieurs concernant les ecoulements turbulents dans les ejecteurs.

Littoral Infrared Ship Self Defence Technology Studies (Autodefense cotiere infrarouge des navires etudes technologiques)

DTIC Science & Technology

2014-05-01

de simulation du Simulateur de Contre- mesures de la Menace Navale afin de pouvoir inclure des leurres et des autodirecteurs de missiles ; 4) Une...sur le littoral ; 2) La détection des petites cibles de surface sur le littoral ; 3) L’amélioration et la validation de la modélisation et du code...amélioration et une validation supplémentaire de la modélisation et du

Hybrid LES/RANS simulation of a turbulent boundary layer over a rectangular cavity

NASA Astrophysics Data System (ADS)

Zhang, Qi; Haering, Sigfried; Oliver, Todd; Moser, Robert

2016-11-01

We report numerical investigations of a turbulent boundary layer over a rectangular cavity using a new hybrid RANS/LES model and the traditional Detached Eddy Simulation (DES). Our new hybrid method aims to address many of the shortcomings from the traditional DES. In the new method, RANS/LES blending controlled by a parameter that measures the ratio of the modeled subgrid kinetic energy to an estimate of the subgrid energy based on the resolved scales. The result is a hybrid method automatically resolves as much turbulence as can be supported by the grid and transitions appropriately from RANS to LES without the need for ad hoc delaying functions that are often required for DES. Further, the new model is designed to improve upon DES by accounting for the effects of grid anisotropy and inhomogeneity in the LES region. We present comparisons of the flow features inside the cavity and the pressure time history and spectra as computed using the new hybrid model and DES.

Etude et simulation du protocole TTEthernet sur un sous-systeme de gestion de vols et adaptation de la planification des tâches a des fins de simulation

NASA Astrophysics Data System (ADS)

Abidi, Dhafer

TTEthernet is a deterministic network technology that makes enhancements to Layer 2 Quality-of-Service (QoS) for Ethernet. The components that implement its services enrich the Ethernet functionality with distributed fault-tolerant synchronization, robust temporal partitioning bandwidth and synchronous communication with fixed latency and low jitter. TTEthernet services can facilitate the design of scalable, robust, less complex distributed systems and architectures tolerant to faults. Simulation is nowadays an essential step in critical systems design process and represents a valuable support for validation and performance evaluation. CoRE4INET is a project bringing together all TTEthernet simulation models currently available. It is based on the extension of models of OMNeT ++ INET framework. Our objective is to study and simulate the TTEthernet protocol on a flight management subsystem (FMS). The idea is to use CoRE4INET to design the simulation model of the target system. The problem is that CoRE4INET does not offer a task scheduling tool for TTEthernet network. To overcome this problem we propose an adaptation for simulation purposes of a task scheduling approach based on formal specification of network constraints. The use of Yices solver allowed the translation of the formal specification into an executable program to generate the desired transmission plan. A case study allowed us at the end to assess the impact of the arrangement of Time-Triggered frames offsets on the performance of each type of the system traffic.

Discrete Event Supervisory Control Applied to Propulsion Systems

NASA Technical Reports Server (NTRS)

Litt, Jonathan S.; Shah, Neerav

2005-01-01

The theory of discrete event supervisory (DES) control was applied to the optimal control of a twin-engine aircraft propulsion system and demonstrated in a simulation. The supervisory control, which is implemented as a finite-state automaton, oversees the behavior of a system and manages it in such a way that it maximizes a performance criterion, similar to a traditional optimal control problem. DES controllers can be nested such that a high-level controller supervises multiple lower level controllers. This structure can be expanded to control huge, complex systems, providing optimal performance and increasing autonomy with each additional level. The DES control strategy for propulsion systems was validated using a distributed testbed consisting of multiple computers--each representing a module of the overall propulsion system--to simulate real-time hardware-in-the-loop testing. In the first experiment, DES control was applied to the operation of a nonlinear simulation of a turbofan engine (running in closed loop using its own feedback controller) to minimize engine structural damage caused by a combination of thermal and structural loads. This enables increased on-wing time for the engine through better management of the engine-component life usage. Thus, the engine-level DES acts as a life-extending controller through its interaction with and manipulation of the engine s operation.

Advanced Technology for SAM Systems Analysis Synthesis and Simulation

DTIC Science & Technology

1984-05-01

aides de nature op~ratlcnnelle, Einanci~rv et technicue. Ainsi peut-on esp6rer iu’en r~sulte- ront les rhoix les rroilloura. Trois des neuf expras~s...EAST (Royal Military College of Science, UNITED KINGDOM) traite des structures des boucles de quidaqe at compare los lois d’ali- gnement t~l~command~es...avec les lois de navigation des missiles autoquid~s. Dants los structures en alignement, le Dr EAST montre qu’il est possible et indispensable

When to use discrete event simulation (DES) for the economic evaluation of health technologies? A review and critique of the costs and benefits of DES.

PubMed

Karnon, Jonathan; Haji Ali Afzali, Hossein

2014-06-01

Modelling in economic evaluation is an unavoidable fact of life. Cohort-based state transition models are most common, though discrete event simulation (DES) is increasingly being used to implement more complex model structures. The benefits of DES relate to the greater flexibility around the implementation and population of complex models, which may provide more accurate or valid estimates of the incremental costs and benefits of alternative health technologies. The costs of DES relate to the time and expertise required to implement and review complex models, when perhaps a simpler model would suffice. The costs are not borne solely by the analyst, but also by reviewers. In particular, modelled economic evaluations are often submitted to support reimbursement decisions for new technologies, for which detailed model reviews are generally undertaken on behalf of the funding body. This paper reports the results from a review of published DES-based economic evaluations. Factors underlying the use of DES were defined, and the characteristics of applied models were considered, to inform options for assessing the potential benefits of DES in relation to each factor. Four broad factors underlying the use of DES were identified: baseline heterogeneity, continuous disease markers, time varying event rates, and the influence of prior events on subsequent event rates. If relevant, individual-level data are available, representation of the four factors is likely to improve model validity, and it is possible to assess the importance of their representation in individual cases. A thorough model performance evaluation is required to overcome the costs of DES from the users' perspective, but few of the reviewed DES models reported such a process. More generally, further direct, empirical comparisons of complex models with simpler models would better inform the benefits of DES to implement more complex models, and the circumstances in which such benefits are most likely.

Etude aerodynamique d'un jet turbulent impactant une paroi concave

NASA Astrophysics Data System (ADS)

LeBlanc, Benoit

Etant donne la demande croissante de temperatures elevees dans des chambres de combustion de systemes de propulsions en aerospatiale (turbomoteurs, moteur a reaction, etc.), l'interet dans le refroidissement par jets impactant s'est vu croitre. Le refroidissement des aubes de turbine permet une augmentation de temperature de combustion, ce qui se traduit en une augmentation de l'efficacite de combustion et donc une meilleure economie de carburant. Le transfert de chaleur dans les au bages est influence par les aspects aerodynamiques du refroidissement a jet, particulierement dans le cas d'ecoulements turbulents. Un manque de comprehension de l'aerodynamique a l'interieur de ces espaces confinees peut mener a des changements de transfert thermique qui sont inattendus, ce qui augmente le risque de fluage. Il est donc d'interet pour l'industrie aerospatiale et l'academie de poursuivre la recherche dans l'aerodynamique des jets turbulents impactant les parois courbes. Les jets impactant les surfaces courbes ont deja fait l'objet de nombreuses etudes. Par contre des conditions oscillatoires observees en laboratoire se sont averees difficiles a reproduire en numerique, puisque les structures d'ecoulements impactants des parois concaves sont fortement dependantes de la turbulence et des effets instationnaires. Une etude experimentale fut realisee a l'institut PPRIME a l'Universite de Poitiers afin d'observer le phenomene d'oscillation dans le jet. Une serie d'essais ont verifie les conditions d'ecoulement laminaires et turbulentes, toutefois le cout des essais experimentaux a seulement permis d'avoir un apercu du phenomene global. Une deuxieme serie d'essais fut realisee numeriquement a l'Universite de Moncton avec l'outil OpenFOAM pour des conditions d'ecoulement laminaire et bidimensionnel. Cette etude a donc comme but de poursuivre l'enquete de l'aerodynamique oscillatoire des jets impactant des parois courbes, mais pour un regime d'ecoulement transitoire, turbulent, tridimensionnel. Les nombres de Reynolds utilises dans l'etude numerique, bases sur le diametre du jet lineaire observe, sont de Red = 3333 et 6667, consideres comme etant en transition vers la turbulence. Dans cette etude, un montage numerique est construit. Le maillage, le schema numerique, les conditions frontiere et la discretisation sont discutes et choisis. Les resultats sont ensuite valides avec des donnees turbulentes experimentales. En modelisation numerique de turbulence, les modeles de Moyennage Reynolds des Equations Naviers Stokes (RANS) presentent des difficultes avec des ecoulements instationnaires en regime transitionnel. La Simulation des Grandes Echelles (LES) presente une solution plus precise, mais au cout encore hors de portee pour cette etude. La methode employee pour cette etude est la Simulation des Tourbillons Detaches (DES), qui est un hybride des deux methodes (RANS et LES). Pour analyser la topologie de l'ecoulement, la decomposition des modes propres (POD) a ete egalement ete effectuee sur les resultats numeriques. L'etude a demontre d'abord le temps de calcul relativement eleve associe a des essais DES pour garder le nombre de Courant faible. Les resultats numeriques ont cependant reussi a reproduire correctement le basculement asynchrone observe dans les essais experimentaux. Le basculement observe semble etre cause par des effets transitionnels, ce qui expliquerait la difficulte des modeles RANS a correctement reproduire l'aerodynamique de l'ecoulement. L'ecoulement du jet, a son tour, est pour la plupart du temps tridimensionnel et turbulent sauf pour de courtes periodes de temps stable et independant de la troisieme dimension. L'etude topologique de l'ecoulement a egalement permit la reconaissances de structures principales sousjacentes qui etaient brouillees par la turbulence. Mots cles : jet impactant, paroi concave, turbulence, transitionnel, simulation des tourbillons detaches (DES), OpenFOAM.

Étude de la réponse photoacoustique d'objets massifs en 3D

NASA Astrophysics Data System (ADS)

Séverac, H.; Mousseigne, M.; Franceschi, J. L.

1996-11-01

In some sectors such as microelectronics or the physics of materials, reliability is of capital importance. It is also particularly attractive to have access on informations on the material behaviour without the use of a destructive test like chemical analysis or others mechanical tests. The submitted method for non-destructive testing is based on the waves generation with a laser beam. The aim of studying the various waves in the three-dimensional space is to bring informations about materials response. Thermoelastic modelisation allowed a rigorous analytic approach and to give rise to a software written in Turbo-Pascal for a more general solution. Dans les secteurs où la fiabilité est capitale, tels la micro-électronique ou la physique des matériaux, il est particulièrement utile d'accéder aux informations sur le comportement du matériau sans avoir à utiliser une méthode destructive (analyses chimiques ou autres essais mécaniques). La méthode de contrôle non destructif présentée est basée sur la génération d'ondes par impact d'un faisceau laser focalisé à la surface d'un échantillon, sans atteindre le régime d'ablation. L'étude de la propagation des diverses ondes dans l'espace tridimensionnel permet d'apporter des mesures quantitatives sur l'analyse de la réponse des matériaux utilisés. La modélisation des phénomènes thermoélastiques a permis une approche analytique rigoureuse et donné naissance à un logiciel de simulation écrit en Turbo-Pascal pour des études plus générales.

Concept Development of the Eindhoven Diabetes Education Simulator Project.

PubMed

Maas, Anne H; van der Molen, Pieta; van de Vijver, Reinier; Chen, Wei; van Pul, Carola; Cottaar, Eduardus J E; van Riel, Natal A W; Hilbers, Peter A J; Haak, Harm R

2016-04-01

This study was designed to define the concept of an educational diabetes game following a user-centered design approach. The concept development of the Eindhoven Diabetes Education Simulator (E-DES) project can be divided in two phases: concept generation and concept evaluation. Four concepts were designed by the multidisciplinary development team based on the outcomes of user interviews. Four other concepts resulted from the Diabetes Game Jam. Several users and experts evaluated the concepts. These user evaluations and a feasibility analysis served as input for an overall evaluation and discussion by the development team resulting in the final concept choice. The four concepts of the development team are a digital board game, a quiz platform, a lifestyle simulator, and a puzzle game. The Diabetes Game Jam resulted in another digital board game, two mobile swipe games, and a fairy tale-themed adventure game. The combined user evaluations and feasibility analysis ranked the quiz platform and the digital board game equally high. Each of these games fits one specific subgroup of users best: the quiz platform best fits an eager-to-learn, more individualistic patient, whereas the board game best fits a less-eager-to-learn, family-oriented patient. The choice for a specific concept is therefore highly dependent on the choice of our specific target audience. The user-centered design approach with multiple evaluations has enabled us to choose the most promising concept from eight different options. A digital board game is chosen for further development because the target audience for E-DES is the less-motivated, family-oriented patients.

A Selection of Test Cases for the Validation of Large-Eddy Simulations of Turbulent Flows (Quelques cas d’essai pour la validation de la simulation des gros tourbillons dans les ecoulements turbulents)

DTIC Science & Technology

1998-04-01

they approach the more useful (higher) Reynolds numbers. 8.6 SUMMARY OF COMPLEX FLOWS SQUARE DUCT CMPO00 UDOv 6.5 x 10’i E Yokosawa ei al. 164] pg...Sheets for: Chapter 8. Complex Flows 184 185 CMPOO: Flow in a square duct - Experiments Yokosawa , Fujita, Hirota, & Iwata 1. Description of the flow...These are the experiments of Yokosawa ei al (1989). Air was blown through a flow meter and a settling chamber into a square duct. Measuremsents were

Investigations of Flow Over a Hemisphere Using Numerical Simulations (Postprint)

DTIC Science & Technology

2015-06-22

ranging from missile defense, remote sensing , and imaging . An important aspect of these applications is determining the effective beam-on-target...Stokes (URANS), detached eddy simulation (DES), and hybrid RANS/LES. The numerical results were compared with the experiment conducted at Auburn...turret. Using the DES and hybrid RANS/LES turbulence models, Loci-Chem was able to capture the unsteady flow structures, such as the shear layer

Modeling and simulation of M/M/c queuing pharmacy system with adjustable parameters

NASA Astrophysics Data System (ADS)

Rashida, A. R.; Fadzli, Mohammad; Ibrahim, Safwati; Goh, Siti Rohana

2016-02-01

This paper studies a discrete event simulation (DES) as a computer based modelling that imitates a real system of pharmacy unit. M/M/c queuing theo is used to model and analyse the characteristic of queuing system at the pharmacy unit of Hospital Tuanku Fauziah, Kangar in Perlis, Malaysia. The input of this model is based on statistical data collected for 20 working days in June 2014. Currently, patient waiting time of pharmacy unit is more than 15 minutes. The actual operation of the pharmacy unit is a mixed queuing server with M/M/2 queuing model where the pharmacist is referred as the server parameters. DES approach and ProModel simulation software is used to simulate the queuing model and to propose the improvement for queuing system at this pharmacy system. Waiting time for each server is analysed and found out that Counter 3 and 4 has the highest waiting time which is 16.98 and 16.73 minutes. Three scenarios; M/M/3, M/M/4 and M/M/5 are simulated and waiting time for actual queuing model and experimental queuing model are compared. The simulation results show that by adding the server (pharmacist), it will reduce patient waiting time to a reasonable improvement. Almost 50% average patient waiting time is reduced when one pharmacist is added to the counter. However, it is not necessary to fully utilize all counters because eventhough M/M/4 and M/M/5 produced more reduction in patient waiting time, but it is ineffective since Counter 5 is rarely used.

Developing Flexible Discrete Event Simulation Models in an Uncertain Policy Environment

NASA Technical Reports Server (NTRS)

Miranda, David J.; Fayez, Sam; Steele, Martin J.

2011-01-01

On February 1st, 2010 U.S. President Barack Obama submitted to Congress his proposed budget request for Fiscal Year 2011. This budget included significant changes to the National Aeronautics and Space Administration (NASA), including the proposed cancellation of the Constellation Program. This change proved to be controversial and Congressional approval of the program's official cancellation would take many months to complete. During this same period an end-to-end discrete event simulation (DES) model of Constellation operations was being built through the joint efforts of Productivity Apex Inc. (PAl) and Science Applications International Corporation (SAIC) teams under the guidance of NASA. The uncertainty in regards to the Constellation program presented a major challenge to the DES team, as to: continue the development of this program-of-record simulation, while at the same time remain prepared for possible changes to the program. This required the team to rethink how it would develop it's model and make it flexible enough to support possible future vehicles while at the same time be specific enough to support the program-of-record. This challenge was compounded by the fact that this model was being developed through the traditional DES process-orientation which lacked the flexibility of object-oriented approaches. The team met this challenge through significant pre-planning that led to the "modularization" of the model's structure by identifying what was generic, finding natural logic break points, and the standardization of interlogic numbering system. The outcome of this work resulted in a model that not only was ready to be easily modified to support any future rocket programs, but also a model that was extremely structured and organized in a way that facilitated rapid verification. This paper discusses in detail the process the team followed to build this model and the many advantages this method provides builders of traditional process-oriented discrete event simulations.

Fine Structure of Diffuse Scattering Rings in Al-Li-Cu Quasicrystal: A Comparative X-ray and Electron Diffraction Study

NASA Astrophysics Data System (ADS)

Donnadieu, P.; Dénoyer, F.

1996-11-01

A comparative X-ray and electron diffraction study has been performed on Al-Li-Cu icosahedral quasicrystal in order to investigate the diffuse scattering rings revealed by a previous work. Electron diffraction confirms the existence of rings but shows that the rings have a fine structure. The diffuse aspect on the X-ray diffraction patterns is then due to an averaging effect. Recent simulations based on the model of canonical cells related to the icosahedral packing give diffractions patterns in agreement with this fine structure effect. Nous comparons les diagrammes de diffraction des rayon-X et des électrons obtenus sur les mêmes échantillons du quasicristal icosaèdrique Al-Li-Cu. Notre but est d'étudier les anneaux de diffusion diffuse mis en évidence par un travail précédent. Les diagrammes de diffraction électronique confirment la présence des anneaux mais ils montrent aussi que ces anneaux possèdent une structure fine. L'aspect diffus des anneaux révélés par la diffraction des rayons X est dû à un effet de moyenne. Des simulations récentes basées sur la décomposition en cellules canoniques de l'empilement icosaédrique produisent des diagrammes de diffraction en accord avec ces effects de structure fine.

Static and Dynamic Disorder in Bacterial Light-Harvesting Complex LH2: A 2DES Simulation Study.

PubMed

Rancova, Olga; Abramavicius, Darius

2014-07-10

Two-dimensional coherent electronic spectroscopy (2DES) is a powerful technique in distinguishing homogeneous and inhomogeneous broadening contributions to the spectral line shapes of molecular transitions induced by environment fluctuations. Using an excitonic model of a double-ring LH2 aggregate, we perform simulations of its 2DES spectra and find that the model of a harmonic environment cannot provide a consistent set of parameters for two temperatures: 77 K and room temperature. This indicates the highly anharmonic nature of protein fluctuations for the pigments of the B850 ring. However, the fluctuations of B800 ring pigments can be assumed as harmonic in this temperature range.

Generic Methodology for Verification and Validation (GM-VV) to Support Acceptance of Models, Simulations and Data (Methodologie generale de verification et de validation (GM-VV) visant a soutenir l acceptation des modeles, simulations et donnees)

DTIC Science & Technology

2015-01-01

RTO ou AGARD doivent comporter la dénomination « STO », « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des informations analogues...rapports de la STO au fur et à mesure de leur publication, vous pouvez consulter notre site Web (http://www.sto.nato.int/) et vous abonner à ce service...le cas, suivie du numéro de série (par exemple AGARD-AG-315). Des informations analogues, telles que le titre et la date de publication sont

Modelling, Simulation & Analysis (MS&A): Potent Enabling Tools for Planning and Executing Complex Major National Events

DTIC Science & Technology

2011-10-01

de 2012 à Londres, les Jeux du Commonwealth de 2015 à Toronto et la gestion des cas d’urgence transfrontaliers...tels que les Jeux olympiques. La gestion de la sécurité lors d’événements comme Vancouver 2010 et les sommets du G8 et du G20 est un enjeu... des plans de gestion des mesures d’urgence et de continuité des opérations, une structure permanente a été mise sur pied

Adaptability in Coalition Teamwork (Faculte d’adaptation au travail d’ equipe en coalition)

DTIC Science & Technology

2008-04-01

et des outils sont nécessaires au développement rapide d’équipes multiculturelles efficaces pour assurer le succès des missions, celles-ci étant...Les principaux résultats des 30 communications théoriques et de recherche ont été les suivants : • Les outils de formation (jeux, simulations...parmi les militaires ; • Le retour d’information sur le moral et les performances des équipes en opérations est un instrument qui est particulièrement

Dark Energy Survey Year 1 Results: Multi-Probe Methodology and Simulated Likelihood Analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krause, E.; et al.

We present the methodology for and detail the implementation of the Dark Energy Survey (DES) 3x2pt DES Year 1 (Y1) analysis, which combines configuration-space two-point statistics from three different cosmological probes: cosmic shear, galaxy-galaxy lensing, and galaxy clustering, using data from the first year of DES observations. We have developed two independent modeling pipelines and describe the code validation process. We derive expressions for analytical real-space multi-probe covariances, and describe their validation with numerical simulations. We stress-test the inference pipelines in simulated likelihood analyses that vary 6-7 cosmology parameters plus 20 nuisance parameters and precisely resemble the analysis to be presented in the DES 3x2pt analysis paper, using a variety of simulated input data vectors with varying assumptions. We find that any disagreement between pipelines leads to changes in assigned likelihoodmore » $$\\Delta \\chi^2 \\le 0.045$$ with respect to the statistical error of the DES Y1 data vector. We also find that angular binning and survey mask do not impact our analytic covariance at a significant level. We determine lower bounds on scales used for analysis of galaxy clustering (8 Mpc$$~h^{-1}$$) and galaxy-galaxy lensing (12 Mpc$$~h^{-1}$$) such that the impact of modeling uncertainties in the non-linear regime is well below statistical errors, and show that our analysis choices are robust against a variety of systematics. These tests demonstrate that we have a robust analysis pipeline that yields unbiased cosmological parameter inferences for the flagship 3x2pt DES Y1 analysis. We emphasize that the level of independent code development and subsequent code comparison as demonstrated in this paper is necessary to produce credible constraints from increasingly complex multi-probe analyses of current data.« less

Fast Plasma Instrument for MMS: Simulation Results

NASA Technical Reports Server (NTRS)

Figueroa-Vinas, Adolfo; Adrian, Mark L.; Lobell, James V.; Simpson, David G.; Barrie, Alex; Winkert, George E.; Yeh, Pen-Shu; Moore, Thomas E.

2008-01-01

Magnetospheric Multiscale (MMS) mission will study small-scale reconnection structures and their rapid motions from closely spaced platforms using instruments capable of high angular, energy, and time resolution measurements. The Dual Electron Spectrometer (DES) of the Fast Plasma Instrument (FPI) for MMS meets these demanding requirements by acquiring the electron velocity distribution functions (VDFs) for the full sky with high-resolution angular measurements every 30 ms. This will provide unprecedented access to electron scale dynamics within the reconnection diffusion region. The DES consists of eight half-top-hat energy analyzers. Each analyzer has a 6 deg. x 11.25 deg. Full-sky coverage is achieved by electrostatically stepping the FOV of each of the eight sensors through four discrete deflection look directions. Data compression and burst memory management will provide approximately 30 minutes of high time resolution data during each orbit of the four MMS spacecraft. Each spacecraft will intelligently downlink the data sequences that contain the greatest amount of temporal structure. Here we present the results of a simulation of the DES analyzer measurements, data compression and decompression, as well as ground-based analysis using as a seed re-processed Cluster/PEACE electron measurements. The Cluster/PEACE electron measurements have been reprocessed through virtual DES analyzers with their proper geometrical, energy, and timing scale factors and re-mapped via interpolation to the DES angular and energy phase-space sampling measurements. The results of the simulated DES measurements are analyzed and the full moments of the simulated VDFs are compared with those obtained from the Cluster/PEACE spectrometer using a standard quadrature moment, a newly implemented spectral spherical harmonic method, and a singular value decomposition method. Our preliminary moment calculations show a remarkable agreement within the uncertainties of the measurements, with the results obtained by the Cluster/PEACE electron spectrometers. The data analyzed was selected because it represented a potential reconnection event as currently published.

Calcul numérique accéléré de mesures de performance sur les modèles Markoviens appliqués aux systèmes informatiques et de télécommunications

NASA Astrophysics Data System (ADS)

Ghaddar, A.; Sinno, N.

2005-05-01

La complexité du phénomène de files d'attente dans les systèmes informatiques et télécommunications nécessite leur simulation par des modèles Markoviens pour les mesures de performance, mesure des délais d'attente au niveau des routeurs pour le modèle informatique et l'étude de la gestion des appels téléphoniques pour le modèle des circuits téléphoniques. L'optimisation des méthodes numériques de résolution des équations relatives à ces deux modèles va permettre d' ídentifier les critères de convergence rapide vers les états stationnaires correspondant à ces mesures.

Evaluation d'un ecosysteme pastoral sahelien: Apport de la geomatique (Oursi, Burkina Faso)

NASA Astrophysics Data System (ADS)

Kabore, Seraphine Sawadogo

L'objectif principal de cette recherche est la mise au point d'une architecture d'integration de donnees socio-bio-geographiques et de donnees satellitales dans un Systeme d'Information Geographique (SIG) en vue d'une aide a la prise de decisions dans un environnement semi-aride au nord du Burkina Faso. Elle repond a la question fondamentale de l'interpretation des effets des facteurs climatiques et socioeconomiques sur le milieu pastoral. La recherche s'est appuyee sur plusieurs hypotheses de travail: possibilite d'utilisation de modele de simulation, d'approche multicritere et de donnees de teledetection dans un cadre de systeme d'information geographique. L'evolution spatiotemporelle des parametres de productivite du milieu a ete evaluee par approche dynamique selon le modele de Wu et al. (1996) qui modelise les interactions entre le climat, le milieu physique, le vegetal et l'animal pour mieux quantifier la biomasse primaire. A ce modele, quatre parametres ont ete integres par approche floue et multicritere afin de prendre en compte la dimension socioeconomique de la productivite pastorale (apport majeur de la recherche): la sante, l'education, l'agriculture et l'eau. La teledetection (imagerie SPOT) a permis de definir la production primaire a partir de laquelle les simulations ont ete realisees sur 10 annees. Les resultats obtenus montrent une bonne correlation entre biomasse primaire in situ et celle calculee pour les deux modeles, avec toutefois une meilleure efficacite du modele modifie (4 fois plus) dans les zones de forte productivite ou l'on note un taux de surexploitation agricole eleve. A cause de la variabilite spatiale de la production primaire in situ, les erreurs des resultats de simulation (8 a 11%) sont acceptables et montrent la pertinence de l'approche grace a l'utilisation des SIG pour la spatialisation et l'integration des differents parametres des modeles. Les types de production secondaire preconises (production de lait pendant 7 mois ou de viande pendant 6 mois) sont bases sur les besoins de l'UBT et le disponible fourrager qui est de qualite mediocre en saison seche. Dans les deux cas de figure, un deficit fourrager est observe. Deux types de transhumance sont proposes afin d'assurer une production durable selon deux scenarios: exploitation rationnelle des unites pastorales selon un plan de rotation annuelle et mise en defens a moyen terme des zones degradees pour une regeneration. Les zones potentielles pour la transhumance ont ete determinees selon les limites acceptables des criteres d'exploitation durable des milieux saheliens definis par Kessler (1994) soit 0,2 UBT.ha-1.

CFD simulation of local and global mixing time in an agitated tank

NASA Astrophysics Data System (ADS)

Li, Liangchao; Xu, Bin

2017-01-01

The Issue of mixing efficiency in agitated tanks has drawn serious concern in many industrial processes. The turbulence model is very critical to predicting mixing process in agitated tanks. On the basis of computational fluid dynamics(CFD) software package Fluent 6.2, the mixing characteristics in a tank agitated by dual six-blade-Rushton-turbines(6-DT) are predicted using the detached eddy simulation(DES) method. A sliding mesh(SM) approach is adopted to solve the rotation of the impeller. The simulated flow patterns and liquid velocities in the agitated tank are verified by experimental data in the literature. The simulation results indicate that the DES method can obtain more flow details than Reynolds-averaged Navier-Stokes(RANS) model. Local and global mixing time in the agitated tank is predicted by solving a tracer concentration scalar transport equation. The simulated results show that feeding points have great influence on mixing process and mixing time. Mixing efficiency is the highest for the feeding point at location of midway of the two impellers. Two methods are used to determine global mixing time and get close result. Dimensionless global mixing time remains unchanged with increasing of impeller speed. Parallel, merging and diverging flow pattern form in the agitated tank, respectively, by changing the impeller spacing and clearance of lower impeller from the bottom of the tank. The global mixing time is the shortest for the merging flow, followed by diverging flow, and the longest for parallel flow. The research presents helpful references for design, optimization and scale-up of agitated tanks with multi-impeller.

Supporting Uncertainty Reasoning in SIMulated Operators for Networks (SIMON) (Le support du raisonnement dans l’incertitude pour des operateurs simules dans un reseau)

DTIC Science & Technology

2005-12-01

moteur de simulation de l’Environnement Intégré de Modélisation de la Performance est utilisé de pair avec l’approche pour démontrer comment des...d’être utilisé dans les forces générées par ordinateur. Le travail ultérieur inclura plus d’essais, l’intégration avec les moteurs de simulateurs et...Aspects are reasoning units relevant to simulated tasks. Each Aspect schema is a 4-tuple: AspectSchema = <MA, WM, LM, CL>, where MA refers to meta

The Geometric Factor of Electrostatic Plasma Analyzers: A Case Study from the Fast Plasma Investigation for the Magnetospheric Multiscale mission

NASA Technical Reports Server (NTRS)

Collinson, Glyn A.; Dorelli, John Charles; Avanov, Leon A.; Lewis, Gethyn R.; Moore, Thomas E.; Pollock, Craig; Kataria, Dhiren O.; Bedington, Robert; Arridge, Chris S.; Chornay, Dennis J.;

Des schémas équivalents pour les circuits couplés multi-enroulements

NASA Astrophysics Data System (ADS)

Keradec, J. P.; Cogitore, B.; Laveuve, E.; Bensoam, M.

1994-04-01

The aim of this paper is to represent the electrical behaviour of any number of magnetically coupled windings with couplers and inductors. Two methods, mathematicaly justified, are proposed. The second one introduces only positive inductances. As an exemple, it is applied to the representation of a three column three phase transformer. The obtained circuits supply the requisite guide to design more complete circuits which allow the high frequency behaviour of wound components to be taken into account, especialy in electronics simulation softwares. Le but de cet article est de traduire le comportement électrique d'un nombre quelconque d'enroulements magnétiquement couplés, par des coupleurs et des inductances. Deux méthodes, établies mathématiquement, sont proposées. La seconde n'introduit que des inductances positives. A titre d'exemple, elle est appliquée à la représentation d'un transformateur triphasé à trois colonnes. Les schémas obtenus fournissent l'indispensable ossature de schémas plus complets, aptes à représenter le comportement haute fréquence des composants bobinés, notamment dans un logiciel de simulation électronique.

Etude thermo-hydraulique de l'ecoulement du moderateur dans le reacteur CANDU-6

NASA Astrophysics Data System (ADS)

Mehdi Zadeh, Foad

Etant donne la taille (6,0 m x 7,6 m) ainsi que le domaine multiplement connexe qui caracterisent la cuve des reacteurs CANDU-6 (380 canaux dans la cuve), la physique qui gouverne le comportement du fluide moderateur est encore mal connue de nos jours. L'echantillonnage de donnees dans un reacteur en fonction necessite d'apporter des changements a la configuration de la cuve du reacteur afin d'y inserer des sondes. De plus, la presence d'une zone intense de radiations empeche l'utilisation des capteurs courants d'echantillonnage. En consequence, l'ecoulement du moderateur doit necessairement etre etudie a l'aide d'un modele experimental ou d'un modele numerique. Pour ce qui est du modele experimental, la fabrication et la mise en fonction de telles installations coutent tres cher. De plus, les parametres de la mise a l'echelle du systeme pour fabriquer un modele experimental a l'echelle reduite sont en contradiction. En consequence, la modelisation numerique reste une alternative importante. Actuellement, l'industrie nucleaire utilise une approche numerique, dite de milieu poreux, qui approxime le domaine par un milieu continu ou le reseau des tubes est remplace par des resistances hydrauliques distribuees. Ce modele est capable de decrire les phenomenes macroscopiques de l'ecoulement, mais ne tient pas compte des effets locaux ayant un impact sur l'ecoulement global, tel que les distributions de temperatures et de vitesses a proximite des tubes ainsi que des instabilites hydrodynamiques. Dans le contexte de la surete nucleaire, on s'interesse aux effets locaux autour des tubes de calandre. En effet, des simulations faites par cette approche predisent que l'ecoulement peut prendre plusieurs configurations hydrodynamiques dont, pour certaines, l'ecoulement montre un comportement asymetrique au sein de la cuve. Ceci peut provoquer une ebullition du moderateur sur la paroi des canaux. Dans de telles conditions, le coefficient de reactivite peut varier de maniere importante, se traduisant par l'accroissement de la puissance du reacteur. Ceci peut avoir des consequences majeures pour la surete nucleaire. Une modelisation CFD (Computational Fluid Dynamics) detaillee tenant compte des effets locaux s'avere donc necessaire. Le but de ce travail de recherche est de modeliser le comportement complexe de l'ecoulement du moderateur au sein de la cuve d'un reacteur nucleaire CANDU-6, notamment a proximite des tubes de calandre. Ces simulations servent a identifier les configurations possibles de l'ecoulement dans la calandre. Cette etude consiste ainsi a formuler des bases theoriques a l'origine des instabilites macroscopiques du moderateur, c.-a-d. des mouvements asymetriques qui peuvent provoquer l'ebullition du moderateur. Le defi du projet est de determiner l'impact de ces configurations de l'ecoulement sur la reactivite du reacteur CANDU-6.

Simulation-based decision support framework for dynamic ambulance redeployment in Singapore.

PubMed

Lam, Sean Shao Wei; Ng, Clarence Boon Liang; Nguyen, Francis Ngoc Hoang Long; Ng, Yih Yng; Ong, Marcus Eng Hock

2017-10-01

Dynamic ambulance redeployment policies tend to introduce much more flexibilities in improving ambulance resource allocation by capitalizing on the definite geospatial-temporal variations in ambulance demand patterns over the time-of-the-day and day-of-the-week effects. A novel modelling framework based on the Approximate Dynamic Programming (ADP) approach leveraging on a Discrete Events Simulation (DES) model for dynamic ambulance redeployment in Singapore is proposed in this paper. The study was based on the Singapore's national Emergency Medical Services (EMS) system. Based on a dataset comprising 216,973 valid incidents over a continuous two-years study period from 1 January 2011-31 December 2012, a DES model for the EMS system was developed. An ADP model based on linear value function approximations was then evaluated using the DES model via the temporal difference (TD) learning family of algorithms. The objective of the ADP model is to derive approximate optimal dynamic redeployment policies based on the primary outcome of ambulance coverage. Considering an 8min response time threshold, an estimated 5% reduction in the proportion of calls that cannot be reached within the threshold (equivalent to approximately 8000 dispatches) was observed from the computational experiments. The study also revealed that the redeployment policies which are restricted within the same operational division could potentially result in a more promising response time performance. Furthermore, the best policy involved the combination of redeploying ambulances whenever they are released from service and that of relocating ambulances that are idle in bases. This study demonstrated the successful application of an approximate modelling framework based on ADP that leverages upon a detailed DES model of the Singapore's EMS system to generate approximate optimal dynamic redeployment plans. Various policies and scenarios relevant to the Singapore EMS system were evaluated. Copyright © 2017 Elsevier B.V. All rights reserved.

Virtual Reality: State of Military Research and Applications in Member Countries (La realite virutelle: L’etat actuel des travaux de recherche et des applications militaires dans les pays membres de l’Alliance)

DTIC Science & Technology

2003-02-01

conducteur pour des sources liées au véhicule (bruits liés au moteur et à la transmission, bruits d’équipements, bruits des passagers , …), pour des...maquette de film , de pièce de théâtre ou de publicité. Initié par le département Réalité Virtuelle de CS, et financé par la Communauté Européenne, le projet... films vidéo, l’utilisateur interagit avec la simulation. L’objectif était de permettre d’étudier les apports de la Réalité Virtuelle dans les

Computational studies of horizontal axis wind turbines in high wind speed condition using advanced turbulence models

NASA Astrophysics Data System (ADS)

Benjanirat, Sarun

Next generation horizontal-axis wind turbines (HAWTs) will operate at very high wind speeds. Existing engineering approaches for modeling the flow phenomena are based on blade element theory, and cannot adequately account for 3-D separated, unsteady flow effects. Therefore, researchers around the world are beginning to model these flows using first principles-based computational fluid dynamics (CFD) approaches. In this study, an existing first principles-based Navier-Stokes approach is being enhanced to model HAWTs at high wind speeds. The enhancements include improved grid topology, implicit time-marching algorithms, and advanced turbulence models. The advanced turbulence models include the Spalart-Allmaras one-equation model, k-epsilon, k-o and Shear Stress Transport (k-o-SST) models. These models are also integrated with detached eddy simulation (DES) models. Results are presented for a range of wind speeds, for a configuration termed National Renewable Energy Laboratory Phase VI rotor, tested at NASA Ames Research Center. Grid sensitivity studies are also presented. Additionally, effects of existing transition models on the predictions are assessed. Data presented include power/torque production, radial distribution of normal and tangential pressure forces, root bending moments, and surface pressure fields. Good agreement was obtained between the predictions and experiments for most of the conditions, particularly with the Spalart-Allmaras-DES model.

Optimal Discrete Event Supervisory Control of Aircraft Gas Turbine Engines

NASA Technical Reports Server (NTRS)

Litt, Jonathan (Technical Monitor); Ray, Asok

2004-01-01

This report presents an application of the recently developed theory of optimal Discrete Event Supervisory (DES) control that is based on a signed real measure of regular languages. The DES control techniques are validated on an aircraft gas turbine engine simulation test bed. The test bed is implemented on a networked computer system in which two computers operate in the client-server mode. Several DES controllers have been tested for engine performance and reliability.

Application of underdamped Langevin dynamics simulations for the study of diffusion from a drug-eluting stent

NASA Astrophysics Data System (ADS)

Regev, Shaked; Farago, Oded

2018-10-01

We use a one-dimensional two layer model with a semi-permeable membrane to study the diffusion of a therapeutic drug delivered from a drug-eluting stent (DES). The rate of drug transfer from the stent coating to the arterial wall is calculated by using underdamped Langevin dynamics simulations. Our results reveal that the membrane has virtually no delay effect on the rate of delivery from the DES. The work demonstrates the great potential of underdamped Langevin dynamics simulations as an easy to implement, efficient, method for solving complicated diffusion problems in systems with a spatially-dependent diffusion coefficient.

Detached Eddy Simulation of Film Cooling over a GE Flat Plate

NASA Technical Reports Server (NTRS)

Roy, Subrata

2005-01-01

The detached eddy simulation of film cooling has been utilized for a proprietary GE plate-pipe configuration. The blowing ratio was 2.02, the velocity ratio was 1.26, and the temperature ratio was 1.61. Results indicate that the mixing processes downstream of the hole are highly anisotropic. DES solution shows its ability to depict the dynamic nature of the flow and capture the asymmetry present in temperature and velocity distributions. Further, comparison between experimental and DES time-averaged effectiveness is satisfactory. Numerical values of span-averaged effectiveness show better prediction of the experimental values at downstream locations than a steady state Glenn HT solution. While the DES method shows obvious promise, there are several issues that need further investigation. Despite an accurate prediction in the hole vicinity, the simulation still falls short in the region x = 10d to 100d. This should be investigated. Also the model used flat plate. Actual turbine blade should be modeled in the future if additional finding is available.

Modelisation numerique de l'hydrologie pour l'aide a la gestion des bassins versants, par l'utilisation conjointe des systemes d'information geographique et de la methode des elements finis un nouvel outil pour le developpement durable SAGESS

NASA Astrophysics Data System (ADS)

Bel Hadj Kacem, Mohamed Salah

All hydrological processes are affected by the spatial variability of the physical parameters of the watershed, and also by human intervention on the landscape. The water outflow from a watershed strictly depends on the spatial and temporal variabilities of the physical parameters of the watershed. It is now apparent that the integration of mathematical models into GIS's can benefit both GIS and three-dimension environmental models: a true modeling capability can help the modeling community bridge the gap between planners, scientists, decision-makers and end-users. The main goal of this research is to design a practical tool to simulate run-off water surface using Geographic design a practical tool to simulate run-off water surface using Geographic Information Systems and the simulation of the hydrological behavior by the Finite Element Method.

Development of a High-Order Space-Time Matrix-Free Adjoint Solver

NASA Technical Reports Server (NTRS)

Ceze, Marco A.; Diosady, Laslo T.; Murman, Scott M.

2016-01-01

The growth in computational power and algorithm development in the past few decades has granted the science and engineering community the ability to simulate flows over complex geometries, thus making Computational Fluid Dynamics (CFD) tools indispensable in analysis and design. Currently, one of the pacing items limiting the utility of CFD for general problems is the prediction of unsteady turbulent ows.1{3 Reynolds-averaged Navier-Stokes (RANS) methods, which predict a time-invariant mean flowfield, struggle to provide consistent predictions when encountering even mild separation, such as the side-of-body separation at a wing-body junction. NASA's Transformative Tools and Technologies project is developing both numerical methods and physical modeling approaches to improve the prediction of separated flows. A major focus of this e ort is efficient methods for resolving the unsteady fluctuations occurring in these flows to provide valuable engineering data of the time-accurate flow field for buffet analysis, vortex shedding, etc. This approach encompasses unsteady RANS (URANS), large-eddy simulations (LES), and hybrid LES-RANS approaches such as Detached Eddy Simulations (DES). These unsteady approaches are inherently more expensive than traditional engineering RANS approaches, hence every e ort to mitigate this cost must be leveraged. Arguably, the most cost-effective approach to improve the efficiency of unsteady methods is the optimal placement of the spatial and temporal degrees of freedom (DOF) using solution-adaptive methods.

Groundwater and climate change: a sensitivity analysis for the Grand Forks aquifer, southern British Columbia, Canada

NASA Astrophysics Data System (ADS)

Allen, D. M.; Mackie, D. C.; Wei, M.

The Grand Forks aquifer, located in south-central British Columbia, Canada was used as a case study area for modeling the sensitivity of an aquifer to changes in recharge and river stage consistent with projected climate-change scenarios for the region. Results suggest that variations in recharge to the aquifer under the different climate-change scenarios, modeled under steady-state conditions, have a much smaller impact on the groundwater system than changes in river-stage elevation of the Kettle and Granby Rivers, which flow through the valley. All simulations showed relatively small changes in the overall configuration of the water table and general direction of groundwater flow. High-recharge and low-recharge simulations resulted in approximately a +0.05 m increase and a -0.025 m decrease, respectively, in water-table elevations throughout the aquifer. Simulated changes in river-stage elevation, to reflect higher-than-peak-flow levels (by 20 and 50%), resulted in average changes in the water-table elevation of 2.72 and 3.45 m, respectively. Simulated changes in river-stage elevation, to reflect lower-than-baseflow levels (by 20 and 50%), resulted in average changes in the water-table elevation of -0.48 and -2.10 m, respectively. Current observed water-table elevations in the valley are consistent with an average river-stage elevation (between current baseflow and peak-flow stages). L'aquifère de Grand Forks, situé en Colombie britannique (Canada), a été utilisé comme zone d'étude pour modéliser la sensibilité d'un aquifère à des modifications de la recharge et du niveau de la rivière, correspondant à des scénarios envisagés de changement climatique dans cette région. Les résultats font apparaître que les variations de recharge de l'aquifère pour différents scénarios de changement climatique, modélisées pour des conditions de régime permanent, ont un impact sur le système aquifère beaucoup plus faible que les changements du niveau des rivières Kettle et Granby, qui coulent dans la vallée. Toutes les simulations ont montré des différences relativement faibles dans la configuration d'ensemble de la nappe et dans la direction générale des écoulements. Des simulations de conditions de recharge forte et de recharge faible produisent respectivement une remontée de 0,05 m et un abaissement de 0,025 m, approximativement, des cotes de la nappe pour l'ensemble de l'aquifère. Des changements simulés de la cote du niveau de la rivière, pour refléter des niveaux plus hauts que ceux des pics de crues (de 20 et de 50%), produisent respectivement des remontées de la nappe de 2,72 et 3,45 m en moyenne. Des changements simulés de l'altitude du niveau de la rivière, pour refléter des niveaux plus bas que ceux de basses eaux (de 20 et de 50%), produisent respectivement des abaissements de la nappe de 0,48 et 2,10 m en moyenne. Les altitudes courantes observées de la nappe dans la vallée sont cohérentes avec une cote moyenne du niveau de la rivière (entre les niveaux courants de basses eaux et de crues). El acuífero de los Grand Forks, situado al sur de la Columbia Británica central (Canadá) ha sido utilizado como lugar de estudio para modelar la sensibilidad de un acuífero a los cambios en la recarga y el caudal de los ríos de acuerdo con escenarios previstos de cambio climático en la región. Los resultados sugieren que las variaciones en la recarga al acuífero bajo los diversos escenarios, que han sido modelados en régimen estacionario, tienen un impacto mucho menor en las aguas subterráneas que los cambios en el caudal de los ríos Kettle y Granby, que discurren por el valle. Todas las simulaciones muestran diferencias relativamente pequeñas en la configuración regional de los niveles freáticos y en la dirección general del flujo subterráneo. Las simulaciones de recarga elevada y baja causan un incremento de 0,05 m y un decremento de 0,025 m, respectivamente, en los niveles del acuífero. Los cambios de la elevación del río, simulados para reflejar niveles de flujo mayores que los valores pico (en un 20% y un 50%) resultan en cambios medios de los niveles del acuífero de 2,72 m y 3,45 m, respectivamente. Los cambios simulados en la elevación del río para flujos inferiores al caudal de base (en un 20% y en un 50%) provocan descensos en los niveles de 0,48 y 2,10 m, respectivamente. Los niveles actuales del acuífero en el valle son coherentes con una elevación media del nivel en el río (entre el caudal de base actual y los picos de caudal).

RF wave simulation for cold edge plasmas using the MFEM library

NASA Astrophysics Data System (ADS)

Shiraiwa, S.; Wright, J. C.; Bonoli, P. T.; Kolev, T.; Stowell, M.

2017-10-01

A newly developed generic electro-magnetic (EM) simulation tool for modeling RF wave propagation in SOL plasmas is presented. The primary motivation of this development is to extend the domain partitioning approach for incorporating arbitrarily shaped SOL plasmas and antenna to the TORIC core ICRF solver, which was previously demonstrated in the 2D geometry [S. Shiraiwa, et. al., "HISTORIC: extending core ICRF wave simulation to include realistic SOL plasmas", Nucl. Fusion in press], to larger and more complicated simulations by including a 3D realistic antenna and integrating RF rectified sheath potential model. Such an extension requires a scalable high fidelity 3D edge plasma wave simulation. We used the MFEM [http://mfem.org], open source scalable C++ finite element method library, and developed a Python wrapper for MFEM (PyMFEM), and then a radio frequency (RF) wave physics module in Python. This approach allows for building a physics layer rapidly, while separating the physics implementation being apart from the numerical FEM implementation. An interactive modeling interface was built on pScope [S Shiraiwa, et. al. Fusion Eng. Des. 112, 835] to work with an RF simulation model in a complicated geometry.

Performance and cost evaluation of health information systems using micro-costing and discrete-event simulation.

PubMed

Rejeb, Olfa; Pilet, Claire; Hamana, Sabri; Xie, Xiaolan; Durand, Thierry; Aloui, Saber; Doly, Anne; Biron, Pierre; Perrier, Lionel; Augusto, Vincent

2018-06-01

Innovation and health-care funding reforms have contributed to the deployment of Information and Communication Technology (ICT) to improve patient care. Many health-care organizations considered the application of ICT as a crucial key to enhance health-care management. The purpose of this paper is to provide a methodology to assess the organizational impact of high-level Health Information System (HIS) on patient pathway. We propose an integrated performance evaluation of HIS approach through the combination of formal modeling using the Architecture of Integrated Information Systems (ARIS) models, a micro-costing approach for cost evaluation, and a Discrete-Event Simulation (DES) approach. The methodology is applied to the consultation for cancer treatment process. Simulation scenarios are established to conclude about the impact of HIS on patient pathway. We demonstrated that although high level HIS lengthen the consultation, occupation rate of oncologists are lower and quality of service is higher (through the number of available information accessed during the consultation to formulate the diagnostic). The provided method allows also to determine the most cost-effective ICT elements to improve the care process quality while minimizing costs. The methodology is flexible enough to be applied to other health-care systems.

Moteurs piézo-électriques à onde progressive : I. Modélisation de la conversion d'énergie mécanique à l'interface stator/rotor

NASA Astrophysics Data System (ADS)

Minotti, P.; Le Moal, P.; Buchaillot, L.; Ferreira, A.

1996-10-01

The modeling of traveling wave type piezoelectric motors involves a large variety of mechanical and physical phenomena and therefore leads to numerous approaches and models. The latter, mainly based on phenomenological and numerical (based on Finite Element Method) analyses, are not suitable for current objectives oriented toward the development of efficient C.A.D. tools. As a result, an attempt is done to investigate analytical approaches, in order to theoretically model the mechanical energy conversion at the stator/rotor interface. This paper is the first in a serie of three articles devoted to the modeling of such rotative motors. After a short description of the operating principles specific to the piezomotors, the mechanical and tribological assumptions made for the driving mechanism of the rotor are briefly described. Then it is shown that the kinematic and dynamic modeling of the stator, combined with the static representation of the stator/rotor interface, gives an efficient way in order to perform the calculation of the loading characteristics of the driving shaft. Finally, the specifications of a new software named C.A.S.I.M.M.I.R.E., which has been recently developed on the basis of our earlier mechanical modeling, are described. In the last of these three papers, the theoretical simulations performed on SHINSEI Japanese motors will show to be close to the experimental data and that the results reported in this paper will lead to the structural optimization of future traveling wave ultrasonic motors. La modélisation des moteurs piézo-électriques à onde progressive implique une grande variété de phénomènes physiques et mécaniques. Cette variété conduit à des approches et modèles tout aussi nombreux et variés, qui reposent principalement sur des analyses phénoménologiques et numériques (Méthode Élements Finis), et ne permettent pas de répondre aux éxigences actuelles concernant le développement d'outils C.A.O. performants. Cette nécessité nous a conduits à développer une modélisation théorique analytique de la conversion d'énergie à l'interface stator/rotor. Ce papier est le premier d'une série de trois articles consacrés à la modélisation des moteurs piézo-électriques rotatifs. Après une rapide description des principes de fonctionnement de ces piézomoteurs, les hypothèses mécaniques et tribologiques concernant le mécanisme d'entraînement du rotor sont énoncées succinctement. On démontre ensuite que la modélisation cinématique et dynamique du stator, combinée à une représentation statique du comportement à l'interface stator/rotor, autorise l'évaluation des caractéristiques en charge des moteurs à onde progressive. Enfin, le logiciel baptisé C.A.S.I.M.M.I.R.E., récemment développé sur la base de la modélisation mécanique précédente, est présenté puis testé. Dans le dernier article de cette série, nous confirmerons la validité des simulations théoriques issues de ce logiciel, à partir de la caractérisation expérimentale de moteurs japonais de la firme SHINSEI. Ce nouveau logiciel constitue d'ores et déjà un outil performant en vue de l'optimisation des futurs moteurs à onde progressive, et a déjà fait l'objet d'une première exploitation en milieu industriel.

Reactive transport modeling of uranium 238 and radium 226 in groundwater of the Königstein uranium mine, Germany

NASA Astrophysics Data System (ADS)

Nitzsche, O.; Merkel, B.

Knowledge of the transport behavior of radionuclides in groundwater is needed for both groundwater protection and remediation of abandoned uranium mines and milling sites. Dispersion, diffusion, mixing, recharge to the aquifer, and chemical interactions, as well as radioactive decay, should be taken into account to obtain reliable predictions on transport of primordial nuclides in groundwater. This paper demonstrates the need for carrying out rehabilitation strategies before closure of the Königstein in-situ leaching uranium mine near Dresden, Germany. Column experiments on drilling cores with uranium-enriched tap water provided data about the exchange behavior of uranium. Uranium breakthrough was observed after more than 20 pore volumes. This strong retardation is due to the exchange of positively charged uranium ions. The code TReAC is a 1-D, 2-D, and 3-D reactive transport code that was modified to take into account the radioactive decay of uranium and the most important daughter nuclides, and to include double-porosity flow. TReAC satisfactorily simulated the breakthrough curves of the column experiments and provided a first approximation of exchange parameters. Groundwater flow in the region of the Königstein mine was simulated using the FLOWPATH code. Reactive transport behavior was simulated with TReAC in one dimension along a 6000-m path line. Results show that uranium migration is relatively slow, but that due to decay of uranium, the concentration of radium along the flow path increases. Results are highly sensitive to the influence of double-porosity flow. Résumé La protection des eaux souterraines et la restauration des sites miniers et de prétraitement d'uranium abandonnés nécessitent de connaître le comportement des radionucléides au cours de leur transport dans les eaux souterraines. La dispersion, la diffusion, le mélange, la recharge de l'aquifère et les interactions chimiques, de même que la décroissance radioactive, doivent être prises en compte pour obtenir des prédictions fiables concernant le transport des nucléides primaires dans les eaux souterraines. Ce papier montre la nécessité d'établir des stratégies de réhabilitation avant la fermeture de la mine d'uranium de Knigstein, près de Dresde (Allemagne). Des expériences de lessivage en colonne sur des carottes avec de l'eau enrichie en uranium fournissent des données sur le comportement de l'échange de l'uranium. La restitution de l'uranium a été observée après un lessivage par un volume supérieur à 20 fois celui des pores. Ce fort retard est dûà l'échange d'ions uranium positifs. Le code TReAC est un code de transport réactif en 1D, 2D et 3D, qui a été modifié pour prendre en compte la décroissance radioactive de l'uranium et les principaux nucléides descendants, et pour introduire l'écoulement dans un milieu à double porosité. TReAC a simulé de façon satisfaisante les courbes de restitution des expériences sur colonne et a fourni une première approche des paramètres de l'échange. L'écoulement souterrain dans la région de la mine de Knigstein a été simulé au moyen du code FLOWPATH. Le comportement du transport réactif a été simulé avec TReAC en une dimension, le long d'un axe d'écoulement long de 6000 m. Les résultats montrent que la migration de l'uranium est relativement lente ; mais du fait de la décroissance radioactive de l'uranium, la concentration en radium le long de cet axe augmente. Les résultats sont très sensibles à l'influence de l'écoulement en milieu à double porosité.

Structure-function studies of BPP-BrachyNH2 and synthetic analogues thereof with Angiotensin I-Converting Enzyme.

PubMed

Arcanjo, Daniel D R; Vasconcelos, Andreanne G; Nascimento, Lucas A; Mafud, Ana Carolina; Plácido, Alexandra; Alves, Michel M M; Delerue-Matos, Cristina; Bemquerer, Marcelo P; Vale, Nuno; Gomes, Paula; Oliveira, Eduardo B; Lima, Francisco C A; Mascarenhas, Yvonne P; Carvalho, Fernando Aécio A; Simonsen, Ulf; Ramos, Ricardo M; Leite, José Roberto S A

2017-10-20

The vasoactive proline-rich oligopeptide termed BPP-BrachyNH 2 (H-WPPPKVSP-NH 2 ) induces in vitro inhibitory activity of angiotensin I-converting enzyme (ACE) in rat blood serum. In the present study, the removal of N-terminal tryptophan or C-terminal proline from BPP-BrachyNH 2 was investigated in order to predict which structural components are important or required for interaction with ACE. Furthermore, the toxicological profile was assessed by in silico prediction and in vitro MTT assay. Two BPP-BrachyNH 2 analogues (des-Trp 1 -BPP-BrachyNH 2 and des-Pro 8 -BPP-BrachyNH 2 ) were synthesized, and in vitro and in silico ACE inhibitory activity and toxicological profile were assessed. The des-Trp 1 -BPP-BrachyNH 2 and des-Pro 8 -BPP-BrachyNH 2 were respectively 3.2- and 29.5-fold less active than the BPP-BrachyNH 2 -induced ACE inhibitory activity. Molecular Dynamic and Molecular Mechanics Poisson-Boltzmann Surface Area simulations (MM-PBSA) demonstrated that the ACE/BBP-BrachyNH 2 complex showed lower binding and van der Wall energies than the ACE/des-Pro 8 -BPP-BrachyNH 2 complex, therefore having better stability. The removal of the N-terminal tryptophan increased the in silico predicted toxicological effects and cytotoxicity when compared with BPP-BrachyNH 2 or des-Pro 8 -BPP-BrachyNH 2 . Otherwise, des-Pro 8 -BPP-BrachyNH 2 was 190-fold less cytotoxic than BPP-BrachyNH 2 . Thus, the removal of C-terminal proline residue was able to markedly decrease both the BPP-BrachyNH 2 -induced ACE inhibitory and cytotoxic effects assessed by in vitro and in silico approaches. In conclusion, the aminoacid sequence of BPP-BrachyNH 2 is essential for its ACE inhibitory activity and associated with an acceptable toxicological profile. The perspective of the interactions of BPP-BrachyNH 2 with ACE found in the present study can be used for development of drugs with differential therapeutic profile than current ACE inhibitors. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

A discrete event simulation model for evaluating the performances of an m/g/c/c state dependent queuing system.

PubMed

Khalid, Ruzelan; Nawawi, Mohd Kamal M; Kawsar, Luthful A; Ghani, Noraida A; Kamil, Anton A; Mustafa, Adli

2013-01-01

M/G/C/C state dependent queuing networks consider service rates as a function of the number of residing entities (e.g., pedestrians, vehicles, and products). However, modeling such dynamic rates is not supported in modern Discrete Simulation System (DES) software. We designed an approach to cater this limitation and used it to construct the M/G/C/C state-dependent queuing model in Arena software. Using the model, we have evaluated and analyzed the impacts of various arrival rates to the throughput, the blocking probability, the expected service time and the expected number of entities in a complex network topology. Results indicated that there is a range of arrival rates for each network where the simulation results fluctuate drastically across replications and this causes the simulation results and analytical results exhibit discrepancies. Detail results that show how tally the simulation results and the analytical results in both abstract and graphical forms and some scientific justifications for these have been documented and discussed.

Exploring the Use of Computer Simulations in Unraveling Research and Development Governance Problems

NASA Technical Reports Server (NTRS)

Balaban, Mariusz A.; Hester, Patrick T.

2012-01-01

Understanding Research and Development (R&D) enterprise relationships and processes at a governance level is not a simple task, but valuable decision-making insight and evaluation capabilities can be gained from their exploration through computer simulations. This paper discusses current Modeling and Simulation (M&S) methods, addressing their applicability to R&D enterprise governance. Specifically, the authors analyze advantages and disadvantages of the four methodologies used most often by M&S practitioners: System Dynamics (SO), Discrete Event Simulation (DES), Agent Based Modeling (ABM), and formal Analytic Methods (AM) for modeling systems at the governance level. Moreover, the paper describes nesting models using a multi-method approach. Guidance is provided to those seeking to employ modeling techniques in an R&D enterprise for the purposes of understanding enterprise governance. Further, an example is modeled and explored for potential insight. The paper concludes with recommendations regarding opportunities for concentration of future work in modeling and simulating R&D governance relationships and processes.

Drug-drug interaction predictions with PBPK models and optimal multiresponse sampling time designs: application to midazolam and a phase I compound. Part 1: comparison of uniresponse and multiresponse designs using PopDes.

PubMed

Chenel, Marylore; Bouzom, François; Aarons, Leon; Ogungbenro, Kayode

2008-12-01

To determine the optimal sampling time design of a drug-drug interaction (DDI) study for the estimation of apparent clearances (CL/F) of two co-administered drugs (SX, a phase I compound, potentially a CYP3A4 inhibitor, and MDZ, a reference CYP3A4 substrate) without any in vivo data using physiologically based pharmacokinetic (PBPK) predictions, population PK modelling and multiresponse optimal design. PBPK models were developed with AcslXtreme using only in vitro data to simulate PK profiles of both drugs when they were co-administered. Then, using simulated data, population PK models were developed with NONMEM and optimal sampling times were determined by optimizing the determinant of the population Fisher information matrix with PopDes using either two uniresponse designs (UD) or a multiresponse design (MD) with joint sampling times for both drugs. Finally, the D-optimal sampling time designs were evaluated by simulation and re-estimation with NONMEM by computing the relative root mean squared error (RMSE) and empirical relative standard errors (RSE) of CL/F. There were four and five optimal sampling times (=nine different sampling times) in the UDs for SX and MDZ, respectively, whereas there were only five sampling times in the MD. Whatever design and compound, CL/F was well estimated (RSE < 20% for MDZ and <25% for SX) and expected RSEs from PopDes were in the same range as empirical RSEs. Moreover, there was no bias in CL/F estimation. Since MD required only five sampling times compared to the two UDs, D-optimal sampling times of the MD were included into a full empirical design for the proposed clinical trial. A joint paper compares the designs with real data. This global approach including PBPK simulations, population PK modelling and multiresponse optimal design allowed, without any in vivo data, the design of a clinical trial, using sparse sampling, capable of estimating CL/F of the CYP3A4 substrate and potential inhibitor when co-administered together.

Using Discrete Event Simulation to predict KPI's at a Projected Emergency Room.

PubMed

Concha, Pablo; Neriz, Liliana; Parada, Danilo; Ramis, Francisco

2015-01-01

Discrete Event Simulation (DES) is a powerful factor in the design of clinical facilities. DES enables facilities to be built or adapted to achieve the expected Key Performance Indicators (KPI's) such as average waiting times according to acuity, average stay times and others. Our computational model was built and validated using expert judgment and supporting statistical data. One scenario studied resulted in a 50% decrease in the average cycle time of patients compared to the original model, mainly by modifying the patient's attention model.

Large Eddy Simulation of Flow in Turbine Cascades Using LESTool and UNCLE Codes

NASA Technical Reports Server (NTRS)

Huang, P. G.

2004-01-01

During the period December 23,1997 and December August 31,2004, we accomplished the development of 2 CFD codes for DNS/LES/RANS simulation of turbine cascade flows, namely LESTool and UNCLE. LESTool is a structured code making use of 5th order upwind differencing scheme and UNCLE is a second-order-accuracy unstructured code. LESTool has both Dynamic SGS and Spalart's DES models and UNCLE makes use of URANS and DES models. The current report provides a description of methodologies used in the codes.

Large Eddy Simulation of Flow in Turbine Cascades Using LEST and UNCLE Codes

NASA Technical Reports Server (NTRS)

Ashpis, David (Technical Monitor); Huang, P. G.

2004-01-01

During the period December 23, 1997 and December August 31, 2004, we accomplished the development of 2 CFD codes for DNS/LES/RANS simulation of turbine cascade flows, namely LESTool and UNCLE. LESTool is a structured code making use of 5th order upwind differencing scheme and UNCLE is a second-order-accuracy unstructured code. LESTool has both Dynamic SGS and Sparlart's DES models and UNCLE makes use of URANS and DES models. The current report provides a description of methodologies used in the codes.

Application d'une technique de modelisation aerodynamique conceptuelle sur la simulation d'un pilote automatique a commande optimale pour un avion d'affaires

NASA Astrophysics Data System (ADS)

Pollender-Moreau, Olivier

Ce document présente, dans le cadre d'un contexte conceptuel, une méthode d'enchaînement servant à faire le lien entre les différentes étapes qui permettent de réaliser la simulation d'un aéronef à partir de ses données géométriques et de ses propriétés massiques. En utilisant le cas de l'avion d'affaires Hawker 800XP de la compagnie Hawker Beechcraft, on démontre, via des données, un processus de traitement par lots et une plate-forme de simulation, comment (1) modéliser la géométrie d'un aéronef en plusieurs surfaces, (2) calculer les forces aérodynamiques selon une technique connue sous le nom de Vortex Lattice Method, (3) construire un modèle de vol servant à la simulation des aéronefs pour leur enveloppe de vol en ajoutant des fonctions supplémentaires, (4) construire un modèle de turbosoufflante simplifié, (5) développer un algorithme d'équilibre (trim) du mouvement longitudinal, (6) développer des algorithmes de contrôle à commande moderne, (7) développer certaines fonctions d'un système de pilotage automatique, et (8) rassembler le tout sous une même plate-forme de simulation. Afin de supporter ce travail, une application publique Matlab, connue sous le nom de Tornado, est utilisée conjointement avec d'autres fonctions pour la conception du modèle de vol aérodynamique. D'ailleurs, il sera démontré que le modèle de vol, quoiqu'il soit quand même crédible, ne concorde pas tout à fait avec les données de référence. Par contre, puisque le modèle des moteurs fonctionne bien, que l'algorithme d'équilibrage du mouvement longitudinal fonctionne bien et que les pôles des systèmes dynamiques concordent avec la littérature, les tests dynamiques effectués au sein de la plate-forme de simulation permettent d'obtenir des résultats fonctionnels et crédibles. D'ailleurs, deux systèmes d'augmentation de la stabilité basés sur la méthode de contrôle moderne LQR et couvrant l'enveloppe de vol de l'aéronef via un système d'ordonnancement des gains sont implémentés respectivement selon les mouvements longitudinal et latéral. Ces fonctions fonctionnent bien et permettent de rencontrer les qualités de vol requises pour un avion d'affaires. Finalement, certaines fonctions concernant un système de pilotage automatique sont implémentées. Dans le cas du mouvement latéral, ces fonctions sont basées sur les méthodes de contrôle modernes et couvrent la totalité de l'enveloppe de vol; mais en ce qui concerne le mouvement longitudinal, elles sont basées sur des algorithmes d'équilibre difficile à gérer pour implémenter sur toute l'enveloppe de vol, c'est pourquoi les tests présentés sont limités à des scénarios bien précis. Dans les deux cas, les essais effectués donnent d'assez bons résultats.

Speciations and Extinctions in a Self-Organizing Critical Model of Tree-Like Evolution

NASA Astrophysics Data System (ADS)

Kramer, M.; Vandewalle, N.; Ausloos, M.

1996-04-01

We study analytically a simple model of a self-organized critical evolution. The model considers both extinction and speciation events leading to the growth of phylogenetic-like trees. Through a mean-field like theory, we study the evolution of the local configurations for the tree leaves. The fitness threshold, below which life activity takes place through avalanches of all sizes is calculated. The transition between speciating (evolving) and dead trees is obtained and is in agreement with numerical simulations. Moreover, this theoretical work suggests that the structure of the tree is strongly dependent on the extinction strength. Nous étudions analytiquement un modèle simple d'évolution auto-organisée critique. Le modèle considère des extinctions et des spéciations conduisant à une croissance d'arbre phylogénétiques. Nous étudions ici par une théorie de champ moyen l'évolution des configurations des extrémités de l'arbre. Le seuil critique de “fitness” en-dessous duquel des explosions d'activité biologique de toutes tailles se produisent est calculé. La transition entre arbres croissants et arbres éteints est également obtenue en accord avec les simulations. En outre, ce travail théorique suggère que la structure des arbres générés dépend fortement du paramètre d'extinctions.

78 FR 77628 - Approval and Promulgation of Air Quality Implementation Plans; New Hampshire; Manchester and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-24

... Hampshire Department of Environmental Services (NH DES) submitted a SIP revision to EPA that contained... 8-hour CO standard. On August 1, 2012, the NH DES submitted a limited maintenance plan SIP revision... DES's SIP revision uses EPA's limited maintenance plan approach, as detailed in the EPA guidance...

Numerical Simulation of Adaptive Control Applicaton to Unstable Solid Rocket Motors

DTIC Science & Technology

2001-06-01

la Technologie des Lanceurs "Vi- Sciences Meeting & Exhibit, Reno, Jan. 15-18. bration des Lanceurs , Toulouse", 1999. AIAA Paper 96-0759, 1996. 7-8...Schmidt. Some recent de- in the presence of pipeline acoustic resonance. velopments in numerical methods for transonic J. Fluids and Structures ., 5:207

Discrete event simulation for healthcare organizations: a tool for decision making.

PubMed

Hamrock, Eric; Paige, Kerrie; Parks, Jennifer; Scheulen, James; Levin, Scott

2013-01-01

Healthcare organizations face challenges in efficiently accommodating increased patient demand with limited resources and capacity. The modern reimbursement environment prioritizes the maximization of operational efficiency and the reduction of unnecessary costs (i.e., waste) while maintaining or improving quality. As healthcare organizations adapt, significant pressures are placed on leaders to make difficult operational and budgetary decisions. In lieu of hard data, decision makers often base these decisions on subjective information. Discrete event simulation (DES), a computerized method of imitating the operation of a real-world system (e.g., healthcare delivery facility) over time, can provide decision makers with an evidence-based tool to develop and objectively vet operational solutions prior to implementation. DES in healthcare commonly focuses on (1) improving patient flow, (2) managing bed capacity, (3) scheduling staff, (4) managing patient admission and scheduling procedures, and (5) using ancillary resources (e.g., labs, pharmacies). This article describes applicable scenarios, outlines DES concepts, and describes the steps required for development. An original DES model developed to examine crowding and patient flow for staffing decision making at an urban academic emergency department serves as a practical example.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pluquet, Alain

Cette théetudie les techniques d'identication de l'electron dans l'experience D0 au laboratoire Fermi pres de Chicago Le premier chapitre rappelle quelques unes des motivations physiques de l'experience physique des jets physique electrofaible physique du quark top Le detecteur D0 est decrit en details dans le second chapitre Le troisieme cha pitre etudie les algorithmes didentication de lelectron trigger reconstruction ltres et leurs performances Le quatrieme chapitre est consacre au detecteur a radiation de transition TRD construit par le Departement dAstrophysique Physique des Particules Physique Nucleaire et dInstrumentation Associee de Saclay il presente son principe sa calibration et ses performances Ennmore » le dernier chapitre decrit la methode mise au point pour lanalyse des donnees avec le TRD et illustre son emploi sur quelques exemples jets simulant des electrons recherche du quark top« less

Molecular diffusion in disordered interfacial media as probed by pulsed field gradients and nuclear magnetic relaxation dispersion

NASA Astrophysics Data System (ADS)

Levitz, P.; Korb, J.-P.; Bryant, R. G.

1999-10-01

We address the question of probing the fluid dynamics in disordered interfacial media by Pulsed field gradient (PFG) and Magnetic relaxation dispersion (MRD) techniques. We show that the PFG method is useful to separate the effects of morphology from the connectivity in disordered macroporous media. We propose simulations of molecular dynamics and spectral density functions, J(ω), in a reconstructed mesoporous medium for different limiting conditions at the pore surface. An algebraic form is found for J(ω) in presence of a surface diffusion and a local exploration of the pore network. A logarithmic form of J(ω) is found in presence of a pure surface diffusion. We present magnetic relaxation dispersion experiments (MRD) for water and acetone in calibrated mesoporous media to support the main results of our simulations and theories. Nous présentons les avantages respectifs des méthodes de gradients de champs pulsés (PFG) et de relaxation magnétique nucléaire en champs cyclés (MRD) pour sonder la dynamique moléculaire dans les milieux interfaciaux désordonnés. La méthode PFG est utile pour séparer la morphologie et la connectivité dans des milieux macroporeux. Des simulations de diffusion moléculaire et de densité spectrale J(ω) en milieux mésoporeux sont présentées dans différentes conditions limites aux interfaces des pores. Nous trouvons une forme de dispersion algébrique de J(ω) pour une diffusion de surface assistée d'une exploration locale du réseau de pores et une forme logarithmique dans le cas d'une simple diffusion de surface. Les résultats expérimentaux de la méthode MRD pour de l'eau et de l'acétone dans des milieux mésoporeux calibrés supportent les résultats principaux de nos simulations et théories.

Hydrodynamic model of cells for designing systems of urban groundwater drainage

NASA Astrophysics Data System (ADS)

Zimmermann, Eric; Riccardi, Gerardo

2000-08-01

An improved mathematical hydrodynamic quasi-two-dimensional model of cells, CELSUB3, is presented for simulating drainage systems that consist of pumping well fields or subsurface drains. The CELSUB3 model is composed of an assemblage of algorithms that have been developed and tested previously and that simulate saturated flow in porous media, closed conduit flow, and flow through pumping stations. A new type of link between aquifer cells and drainage conduits is proposed. This link is verified in simple problems with well known analytical solutions. The correlation between results from analytical and mathematical solutions was considered satisfactory in all cases. To simulate more complex situations, the new proposed version, CELSUB3, was applied in a project designed to control the water-table level within a sewer system in Chañar Ladeado Town, Santa Fe Province, Argentina. Alternative drainage designs, which were evaluated under conditions of dynamic recharge caused by rainfall in a critical year (wettest year for the period of record) and a typical year, are briefly described. After analyzing ten alternative designs, the best technical-economic solution is a subsurface drainage system of closed conduits with pumping stations and evacuation channels. Résumé. Un modèle hydrodynamique perfectionné de cellules en quasi 2D, CELSUB3, est présenté dans le but de simuler des systèmes de drainage qui consistent en des champs de puits de pompage ou de drains souterrains. Le modèle CELSUB3 est composé d'un assemblage d'algorithmes développés et testés précédemment et qui simulent des écoulements en milieu poreux saturé, en conduites et dans des stations de pompage. Un nouveau type de lien entre des cellules d'aquifères et des drains est proposé. Ce lien est vérifié dans des problèmes simples dont les solutions analytiques sont bien connues. La corrélation entre les résultats des solutions analytiques et des solutions mathématiques a été considérée comme satisfaisante dans tous les cas. Afin de simuler des situations plus complexes, la nouvelle version proposée, CELSUB3, a été mise en œuvre dans un projet destiné à contrôler le niveau de la nappe à l'intérieur d'un système d'égouts, dans la ville de Chaar Ladeado (province de Santa Fe, Argentine). Différentes organisations du projet de drainage, qui ont été testées pour des conditions de recharge dynamique causées par la pluie au cours d'une année critique (la plus humide de la chronique disponible) et une année typique, sont brièvement décrites. Après analyse de dix organisations différentes, la meilleure solution technico-économique retenue est un système de drainage souterrain de conduites avec des stations de pompage et des canaux d'évacuation. Resumen. Se presenta un modelo matemático hidrodinámico cuasi-bidimensional de celdas, CELSUB3, apto para la simulación integral de sistemas de drenaje subterráneo basados en campos de bombeo o drenes subsuperficiales. El modelo de simulación presenta un ensamble de algoritmos, previamente desarrollados y testeados, que representan al escurrimiento a través del medio poroso saturado, escurrimiento en conducciones cerradas, estaciones de bombeo, etc. En la estructura del modelo se propone un nuevo tipo de vinculación entre celdas acuíferas y conductos de drenaje, la cual es verificada en problemas simples con solución analítica conocida arrojando, en todos los casos, resultados satisfactorios. Abordando situaciones más complejas, la nueva versión propuesta fue aplicada en un proyecto de control de niveles freáticos que acompaña un sistema de conductos cloacales, en la localidad de Chañar Ladeado, Santa Fe, Argentina. Se describen las alternativas de drenaje consideradas las cuales fueron evaluadas bajo recargas dinámicas provocadas por años críticamente lluviosos y en situaciones típicas. Los resultados derivados permitieron definir, tras analizar una decena de proyectos alternativos, la mejor solución técnico-económica consistente en un sistema de drenes subterráneos, estaciones de bombeo y canales de evacuación.

Optimisation thermique de moules d'injection construits par des processus génératifs

NASA Astrophysics Data System (ADS)

Boillat, E.; Glardon, R.; Paraschivescu, D.

2002-12-01

Une des potentialités les plus remarquables des procédés de production génératifs, comme le frittage sélectif par laser, est leur capacité à fabriquer des moules pour l'injection plastique équipés directement de canaux de refroidissement conformes, parfaitement adaptés aux empreintes Pour que l'industrie de l'injection puisse tirer pleinement parti de cette nouvelle opportunité, il est nécessaire de mettre à la disposition des moulistes des logiciels de simulation capables d'évaluer les gains de productivité et de qualité réalisables avec des systèmes de refroidissement mieux adaptés. Ces logiciels devraient aussi être capables, le cas échéant, de concevoir le système de refroidissement optimal dans des situations où l'empreinte d'injection est complexe. Devant le manque d'outils disponibles dans ce domaine, le but de cet article est de proposer un modèle simple de moules d'injection. Ce modèle permet de comparer différentes stratégies de refroidissement et peut être couplé avec un algorithme d'optimisation.

Methodes de caracterisation des proprietes thermomecaniques d'un acier martensitique =

NASA Astrophysics Data System (ADS)

Ausseil, Lucas

Le but de l'etude est de developper des methodes permettant de mesurer les proprietes thermomecaniques d'un acier martensitique lors de chauffe rapide. Ces donnees permettent d'alimenter les modeles d'elements finis existant avec des donnees experimentales. Pour cela, l'acier 4340 est utilise. Cet acier est notamment utilise dans les roues d'engrenage, il a des proprietes mecaniques tres interessantes. Il est possible de modifier ses proprietes grâce a des traitements thermiques. Le simulateur thermomecanique Gleeble 3800 est utilise. Il permet de tester theoriquement toutes les conditions presentes dans les procedes de fabrication. Avec les tests de dilatation realises dans ce projet, les temperatures exactes de changement de phases austenitiques et martensitiques sont obtenues. Des tests de traction ont aussi permis de deduire la limite d'elasticite du materiau dans le domaine austenitique allant de 850 °C a 1100 °C. L'effet des deformations sur la temperature de debut de transformation est montre qualitativement. Une simulation numerique est aussi realisee pour comprendre les phenomenes intervenant pendant les essais.

Models for Aircrew Safety Assessment: Uses, Limitations and Requirements (la Modelisation des conditions de securite des equipages: applications, limitations et cahiers des charges)

DTIC Science & Technology

1999-08-01

immediately, re- ducing venous return artifacts during the first beat of the simulation. tn+1 - W+ on c+ / \\ W_ on c_ t 1 Xi-l Xi+1 Figure 4...s) Figure 5: The effect of network complexity. The aortic pressure is shown in Figure 5 during the fifth beat for the networks with one and three...Mechanical Engineering Department, Uni- versity of Victoria. [19] Huyghe J.M., 1986, "Nonlinear Finite Element Models of The Beating Left

Precision matrix expansion - efficient use of numerical simulations in estimating errors on cosmological parameters

NASA Astrophysics Data System (ADS)

Friedrich, Oliver; Eifler, Tim

2018-01-01

Computing the inverse covariance matrix (or precision matrix) of large data vectors is crucial in weak lensing (and multiprobe) analyses of the large-scale structure of the Universe. Analytically computed covariances are noise-free and hence straightforward to invert; however, the model approximations might be insufficient for the statistical precision of future cosmological data. Estimating covariances from numerical simulations improves on these approximations, but the sample covariance estimator is inherently noisy, which introduces uncertainties in the error bars on cosmological parameters and also additional scatter in their best-fitting values. For future surveys, reducing both effects to an acceptable level requires an unfeasibly large number of simulations. In this paper we describe a way to expand the precision matrix around a covariance model and show how to estimate the leading order terms of this expansion from simulations. This is especially powerful if the covariance matrix is the sum of two contributions, C = A+B, where A is well understood analytically and can be turned off in simulations (e.g. shape noise for cosmic shear) to yield a direct estimate of B. We test our method in mock experiments resembling tomographic weak lensing data vectors from the Dark Energy Survey (DES) and the Large Synoptic Survey Telescope (LSST). For DES we find that 400 N-body simulations are sufficient to achieve negligible statistical uncertainties on parameter constraints. For LSST this is achieved with 2400 simulations. The standard covariance estimator would require >105 simulations to reach a similar precision. We extend our analysis to a DES multiprobe case finding a similar performance.

Mise au point du rheometre a cisaillement annulaire pour l'etude de rheologie d'un mastic bitumineux avec verre incorpore =

NASA Astrophysics Data System (ADS)

El Mansouri, Souleimane

Dans le domaine viscoelastique lineaire (VEL, domaine des petites deformations), le comportement thermomecanique du bitume et du mastic bitumineux (melange uniforme de bitume et de fillers) a ete caracterise au Laboratoire des Chaussees et Materiaux Bitumineux (LCMB) de l'Ecole de technologie superieure (ETS) avec l'appui de nos partenaires externes : la Societe des Alcools du Quebec (SAQ) et Eco Entreprises Quebec (EEQ). Les proprietes rheologiques des bitumes et des mastics ont ete mesurees grâce a un nouvel outil d'investigation appele, Rheometre a Cisaillement Annulaire (RCA), sous differentes conditions de chargement. Cet appareil permet non seulement de solliciter des eprouvettes de tailles importantes par rapport a celles utilisees lors des essais classiques, mais aussi d'effectuer des essais en conditions quasi-homogenes, ce qui permet de donner acces a la loi de comportement des materiaux. Les essais sont realises sur une large gamme de temperatures et de frequences (de -15 °C a 45°C et de 0,03Hz a 10 Hz). Cette etude a ete menee principalement pour comparer le comportement d'un bitume avec celui d'un mastic bitumineux dans le domaine des petites deformations. neanmoins, dans une seconde perspective, on s'interesse a l'influence des fillers de verre de post-consommation sur le comportement d'un mastic a faibles niveaux de deformations en comparant l'evolution des modules complexes de cisaillements (G*) d'un mastic avec fillers de verre et un mastic avec fillers conventionnels (calcaire). Enfin, le modele analogique 2S2P1D est utilise pour simuler le comportement viscoelastique lineaire des bitumes et des mastics bitumineux testes lors de la campagne experimentale.

Advances in Rotor Performance and Turbulent Wake Simulation Using DES and Adaptive Mesh Refinement

NASA Technical Reports Server (NTRS)

Chaderjian, Neal M.

2012-01-01

Time-dependent Navier-Stokes simulations have been carried out for a rigid V22 rotor in hover, and a flexible UH-60A rotor in forward flight. Emphasis is placed on understanding and characterizing the effects of high-order spatial differencing, grid resolution, and Spalart-Allmaras (SA) detached eddy simulation (DES) in predicting the rotor figure of merit (FM) and resolving the turbulent rotor wake. The FM was accurately predicted within experimental error using SA-DES. Moreover, a new adaptive mesh refinement (AMR) procedure revealed a complex and more realistic turbulent rotor wake, including the formation of turbulent structures resembling vortical worms. Time-dependent flow visualization played a crucial role in understanding the physical mechanisms involved in these complex viscous flows. The predicted vortex core growth with wake age was in good agreement with experiment. High-resolution wakes for the UH-60A in forward flight exhibited complex turbulent interactions and turbulent worms, similar to the V22. The normal force and pitching moment coefficients were in good agreement with flight-test data.

SoC: Une Nouvelle Approche de l’Amelioration des Performances des Systemes pour Combattre les Problemes de Disponibilite a Long Terme (SoC: A New Approach to Enhance System Performances and to Combat the Long-Term Availability Issue)

DTIC Science & Technology

2001-01-01

cin~tique Properties»> ou o IP »>. En fait, ces IP ne sont rien (exemple : un missile en vol libre ). Meme si on peut d’autres que des composants sur...probablement pas radicalement le problkme peuvent soit achet~s soit &tre issus de conceptions au niveau des composants 6lectroniques. pr&c~dentes. Les

Systematic Biases in Weak Lensing Cosmology with the Dark Energy Survey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samuroff, Simon

This thesis sets out a practical guide to applying shear measurements as a cosmological tool. We first present one of two science-ready galaxy shape catalogues from Year 1 of the Dark Energy Survey (DES Y1), which covers 1500 square degrees in four bandsmore » $griz$, with a median redshift of $0.59$. We describe the shape measurement process implemented by the DES Y1 imshape catalogue, which contains 21.9 million high-quality $r$-band bulge/disc fits. In Chapter 3 a new suite of image simulations, referred to as Hoopoe, are presented. The Hoopoe dataset is tailored to DES Y1 and includes realistic blending, spatial masks and variation in the point spread function. We derive shear corrections, which we show are robust to changes in calibration method, galaxy binning and variance within the simulated dataset. Sources of systematic uncertainty in the simulation-based shear calibration are discussed, leading to a final estimate of the $$1\\sigma$$ uncertainties in the residual multiplica tive bias after calibration of 0.025. Chapter 4 describes an extension of the analysis on the Hoopoe simulations into a detailed investigation of the impact of galaxy neighbours on shape measurement and shear cosmology. Four mechanisms by which neighbours can have a non-negligible influence on shear measurement are identified. These effects, if ignored, would contribute a net multiplicative bias of $$m \\sim 0.03 - 0.09$$ in DES Y1, though the precise impact will depend on both the measurement code and the selection cuts applied. We use the cosmological inference pipeline of DES Y1 to explore the cosmological implications of neighbour bias and show that omitting blending from the calibration simulation for DES Y1 would bias the inferred clustering amplitude $$S_8 \\equiv \\sigma_8 (\\omegam /0.3)^{0.5}$$ by $$1.5 \\sigma$$ towards low values. Finally, we use the Hoopoe simulations to test the effect of neighbour-induced spatial correlations in the multiplicative bias. We find the cosmo logical impact to be subdominant to statistical error at the! current level of precision. Another major uncertainity in shear cosmology is the accuracy of our ensemble redshift distributions. Chapter 5 presents a numerical investigation into the combined constraining power of cosmic shear, galaxy clustering and their cross-correlation in DES Y1, and the potential for internal calibration of redshift errors. Introducing a moderate uniform bias into the redshift distributions used to model the weak lensing (WL) galaxies is shown to produce a $$> 2\\sigma$$ bias in $$S_8$$. We demonstrate that this cosmological bias can be eliminated by marginalising over redshift error nuisance parameters. Strikingly, the cosmological constraint of the combined dataset is largely undiminished by the loss of prior information on the WL distributions. We demonstrate that this implicit self-calibration is the result of complementary degeneracy directions in the combined data. In Chapter 6 we present the preliminary results of an investigation into galaxy intrin sic alignments. Using the DES Y1 data, we show a clear dependence in alignment amplitude on galaxy type, in agreement with previous results. We subject these findings to a series of initial robustness tests. We conclude with a short overview of the work presented, and discuss prospects for the future.« less

Improving Human Effectiveness Through Embedded Virtual Simulation (Amelioration de l’efficacite humaine grace a la simulation virtuelle integree)

DTIC Science & Technology

2014-01-01

mesurer leur expérience. Le groupe a rencontré des experts des technologies associées : les environnements virtuels, la réalité augmentée, les agents...virtuels, l’entraînement, l’ergonomie et la performance humaine. Les réflexions et conclusions issues de ces réunions et discussions sont résumées dans...en matière de EVS/ET (incluant les caractéristiques de l’utilisateur, la mission et l’environnement) et la gestion de l’entraînement est un

Research Using In Vivo Simulation of Meta-Organizational Shared Decision-making (SDM). Task 4: Modeling of Communication and Decision Functions within a Shared Decision-making (SDM) Framework

DTIC Science & Technology

2011-12-01

la Reine (en droit du Canada), telle que représentée par le ministre de la Défense nationale 2011, Abstract...modélisation des fonctions de communication et de prise de décision dans le cadre de la prise de décision partagée (PDP) du volet de travail « Recherche par... la simulation in-vivo sur la prise de décision partagée des méta-organisations ». Cette composante du programme

Apport de la simulation numérique à la compréhension des mécanismes d'interaction de cavités dans le cadre de la modélisation de l'endommagement ductile sous sollicitation dynamique

NASA Astrophysics Data System (ADS)

Roy, G.; Buy, F.; Llorca, F.

2002-12-01

L'étude présentée s'inscrit dans le cadre d'une démarche menant à la construction d'un modèle analytique ou semi analytique de comportement élasto-visco-plastique endommageable, applicable aux chargements rencontrés en configuration d'impact violent et générant de l'écaillage ductile. La prise en compte des effets de compressibilité et de micro inertie est essentielle pour modéliser la phase de croissance. Des simulations numériques globales de la structure et locales à l'échelle des hétérogénéités permettent d'évaluer les niveaux de sollicitations dans les zones susceptibles de s'endommager, dévaluer des critères analytiques de germination de l'endommagement et de comprendre les mécanismes d'interaction entre les défauts. Les effets micro inertiels et de compressibilité sont ainsi mis en évidence dans les phases de germination et de coalescence des micro défauts. II s'agit ici d'une illustration non exhaustive de travaux engagés au CEA Valduc sur le tantale, dans le cadre d'une thèse [10]. Un programme matériaux en partenariat CEA-CNRS sur la modélisation multi échelles du comportement de structures a également été initié dans ce contexte.

Detached-Eddy Simulations of Separated Flow Around Wings With Ice Accretions: Year One Report

NASA Technical Reports Server (NTRS)

Choo, Yung K. (Technical Monitor); Thompson, David; Mogili, Prasad

2004-01-01

A computational investigation was performed to assess the effectiveness of Detached-Eddy Simulation (DES) as a tool for predicting icing effects. The AVUS code, a public domain flow solver, was employed to compute solutions for an iced wing configuration using DES and steady Reynolds Averaged Navier-Stokes (RANS) equation methodologies. The configuration was an extruded GLC305/944-ice shape section with a rectangular planform. The model was mounted between two walls so no tip effects were considered. The numerical results were validated by comparison with experimental data for the same configuration. The time-averaged DES computations showed some improvement in lift and drag results near stall when compared to steady RANS results. However, comparisons of the flow field details did not show the level of agreement suggested by the integrated quantities. Based on our results, we believe that DES may prove useful in a limited sense to provide analysis of iced wing configurations when there is significant flow separation, e.g., near stall, where steady RANS computations are demonstrably ineffective. However, more validation is needed to determine what role DES can play as part of an overall icing effects prediction strategy. We conclude the report with an assessment of existing computational tools for application to the iced wing problem and a discussion of issues that merit further study.

Approches pour la reduction de l'impact de defaut dans le transport d'energie du parc eolien offshore via VSC-HVDC =

NASA Astrophysics Data System (ADS)

Benadja, Mounir

Dans ce travail est presente un systeme de generation d'energie d'un parc eolien offshore et un systeme de transport utilisant les stations VSC-HVDC connectees au reseau principal AC onshore. Trois configurations ont ete etudiees, modelisees et validees par simulation. Dans chacune des configurations, des contributions ameliorant les cotes techniques et economiques sont decrites ci-dessous : La premiere contribution concerne un nouvel algorithme MPPT (Maximum Power Point Tracking) utilise pour l'extraction de la puissance maximale disponible dans les eoliennes des parcs offshores. Cette technique d'extraction du MPPT ameliore le rendement energetique de la chaine de conversion des energies renouvelables notamment l'energie eolienne a petite et a grande echelles (parc eolien offshore) qui constitue un probleme pour les constructeurs qui se trouvent confrontes a developper des dispositifs MPPT simples, moins couteux, robustes, fiables et capable d'obtenir un rendement energetique maximal. La deuxieme contribution concerne la reduction de la taille, du cout et de l'impact des defauts electriques (AC et DC) dans le systeme construit pour transporter l'energie d'un parc eolien offshore (OWF) vers le reseau principal AC onshore via deux stations 3L-NPC VSCHVDC. La solution developpee utilise des observateurs non-lineaires bases sur le filtre de Kalman etendu (EKF). Ce filtre permet d'estimer la vitesse de rotation et la position du rotor de chacune des generatrices du parc eolien offshore et de la tension du bus DC de l'onduleur DC-AC offshore et des deux stations 3L-NPC-VSC-HVDC (offshore et onshore). De plus, ce developpement du filtre de Kalman etendu a permis de reduire l'impact des defauts AC et DC. Deux commandes ont ete utilisees, l'une (commande indirect dans le plan abc) avec EKF integre destinee pour controler le convertisseur DC-AC offshore et l'autre (commande d-q) avec EKF integre pour controler les convertisseurs des deux stations AC-DC et DC-AC tout en tenant compte des entrees de chacune des stations. L'integration des observateurs non-lineaires (EKF) dans le controle des convertisseurs permet de resoudre le probleme des incertitudes de mesure, des incertitudes dans la modelisation, en cas du dysfonctionnement ou de panne des capteurs de mesure ainsi que le probleme de l'impact des defauts (AC et DC) sur la qualite d'energie dans les systemes de transmission. Ces estimations contribuent a rendre le cout global du systeme moins cher et sa taille moins encombrante ainsi que la reduction de l'impact des defauts (AC et DC) sur le systeme. La troisieme contribution concerne la reduction de la taille, du cout et de l'impact des defauts electriques (AC et DC) dans le systeme construit pour transporter l'energie d'un parc eolien offshore (OWF) vers le reseau principal AC onshore via deux stations VSC-HVDC. La solution developpee utilise des observateurs non-lineaires bases sur le filtre de Kalman etendu (EKF). Ce filtre permet d'estimer la vitesse de rotation et la position du rotor de chacune des generatrices du parc eolien et de la tension du bus DC de l'onduleur DC-AC offshore. La contribution porte surtout sur le developpement des deux commandes des deux stations. La premiere, la commande non-lineaire modifiee pour controler le premier convertisseur de la station VSC-HVDC offshore assurant le transfert de la puissance generee par le parc eolien vers la station VSC-HVDC onshore. La deuxieme commande non-lineaire modifiee avec integration de la regulation de la tension du bus DC et de la commande a modele de reference adaptative (MRAC) pour la compensation des surintensites et surtensions durant les defauts AC et DC. On peut constater que lors d'un defaut AC au PCC (Point of Common Coupling) du cote reseau onshore, la profondeur de l'impact du defaut AC sur l'amplitude des courants du reseau principal AC onshore qui etait reduit a 60% par les travaux de recherche (Erlich, Feltes et Shewarega, 2014), comparativement a la nouvelle commande proposee MRAC qui reduit la profondeur de l'impact a 35%. Lors de l'apparition des defauts AC et DC, une reduction de l'impact des defauts sur l'amplitude des courants de reseau AC terrestre et du temps de reponse a ete observee et la stabilite du systeme a ete renforcee par l'utilisation de la commande adaptative basee sur le modele de reference MRAC. La quatrieme contribution concerne une nouvelle commande basee sur le mode de glissement (SM) appliquee pour la station VSC-HVDC qui relie le parc eolien offshore (OWF) au reseau principal AC. Ce parc est compose de dix eoliennes basees sur des generatrices synchrones a aimant permanent (VSWT/PMSGs) connectees en parallele et chacune est controlee par son propre convertisseur DC-DC. Une comparaison des performances entre la commande SM et de la commande non-lineaire avec des controleurs PI pour les deux conditions (presence et absence de defaut DC) a ete analysee et montre la superiorite de la commande par SM. Un prototype du systeme etudie a echelle reduite a ete realise et teste au laboratoire GREPCI en utilisant la carte dSPACE-DS1104 pour la validation experimentale. L'analyse et la simulation des systemes etudies sont developpees sous l'environnement Matlab/Simulink/Simpowersystem. Les resultats obtenus a partir des configurations developpees sont valides par simulation et par experimentation. Les performances sont tres satisfaisantes du point de vue reponse dynamique, reponse en regime permanent, stabilite du systeme et qualite de l'energie.

Ajustement statistique des simulations climatiques : l'exemple des précipitations saisonnières de l'Amérique tropicaleStatistical adjustment of simulated climate: example of seasonal rainfall of tropical America.

NASA Astrophysics Data System (ADS)

Moron, Vincent; Navarra, Antonio

2000-05-01

This study presents the skill of the seasonal rainfall of tropical America from an ensemble of three 34-year general circulation model (ECHAM 4) simulations forced with observed sea surface temperature between 1961 and 1994. The skill gives a first idea of the amount of potential predictability if the sea surface temperatures are perfectly known some time in advance. We use statistical post-processing based on the leading modes (extracted from Singular Value Decomposition of the covariance matrix between observed and simulated rainfall fields) to improve the raw skill obtained by simple comparison between observations and simulations. It is shown that 36-55 % of the observed seasonal variability is explained by the simulations on a regional basis. Skill is greatest for Brazilian Nordeste (March-May), but also for northern South America or the Caribbean basin in June-September or northern Amazonia in September-November for example.

Effets de l'humidite sur la propagation du delaminage dans un composite carbone/epoxy sollicite en mode mixte I/II

NASA Astrophysics Data System (ADS)

LeBlanc, Luc R.

Les materiaux composites sont de plus en plus utilises dans des domaines tels que l'aerospatiale, les voitures a hautes performances et les equipements sportifs, pour en nommer quelques-uns. Des etudes ont demontre qu'une exposition a l'humidite nuit a la resistance des composites en favorisant l'initiation et la propagation du delaminage. De ces etudes, tres peu traitent de l'effet de l'humidite sur l'initiation du delaminage en mode mixte I/II et aucune ne traite des effets de l'humidite sur le taux de propagation du delaminage en mode mixte I/II dans un composite. La premiere partie de cette these consiste a determiner les effets de l'humidite sur la propagation du delaminage lors d'une sollicitation en mode mixte I/II. Des eprouvettes d'un composite unidirectionnel de carbone/epoxy (G40-800/5276-1) ont ete immergees dans un bain d'eau distillee a 70°C jusqu'a leur saturation. Des essais experimentaux quasi-statiques avec des chargements d'une gamme de mixites des modes I/II (0%, 25%, 50%, 75% et 100%) ont ete executes pour determiner les effets de l'humidite sur la resistance au delaminage du composite. Des essais de fatigue ont ete realises, avec la meme gamme de mixite des modes I/II, pour determiner 1'effet de 1'humidite sur l'initiation et sur le taux de propagation du delaminage. Les resultats des essais en chargement quasi-statique ont demontre que l'humidite reduit la resistance au delaminage d'un composite carbone/epoxy pour toute la gamme des mixites des modes I/II, sauf pour le mode I ou la resistance au delaminage augmente apres une exposition a l'humidite. Pour les chargements en fatigue, l'humidite a pour effet d'accelerer l'initiation du delaminage et d'augmenter le taux de propagation pour toutes les mixites des modes I/II. Les donnees experimentales recueillies ont ete utilisees pour determiner lesquels des criteres de delaminage en statique et des modeles de taux de propagation du delaminage en fatigue en mode mixte I/II proposes dans la litterature representent le mieux le delaminage du composite etudie. Une courbe de regression a ete utilisee pour determiner le meilleur ajustement entre les donnees experimentales et les criteres de delaminage en statique etudies. Une surface de regression a ete utilisee pour determiner le meilleur ajustement entre les donnees experimentales et les modeles de taux de propagation en fatigue etudies. D'apres les ajustements, le meilleur critere de delaminage en statique est le critere B-K et le meilleur modele de propagation en fatigue est le modele de Kenane-Benzeggagh. Afin de predire le delaminage lors de la conception de pieces complexes, des modeles numeriques peuvent etre utilises. La prediction de la longueur de delaminage lors des chargements en fatigue d'une piece est tres importante pour assurer qu'une fissure interlaminaire ne va pas croitre excessivement et causer la rupture de cette piece avant la fin de sa duree de vie de conception. Selon la tendance recente, ces modeles sont souvent bases sur l'approche de zone cohesive avec une formulation par elements finis. Au cours des travaux presentes dans cette these, le modele de progression du delaminage en fatigue de Landry & LaPlante (2012) a ete ameliore en y ajoutant le traitement des chargements en mode mixte I/II et en y modifiant l'algorithme du calcul de la force d'entrainement maximale du delaminage. Une calibration des parametres de zone cohesive a ete faite a partir des essais quasi-statiques experimentaux en mode I et II. Des resultats de simulations numeriques des essais quasi-statiques en mode mixte I/II, avec des eprouvettes seches et humides, ont ete compares avec les essais experimentaux. Des simulations numeriques en fatigue ont aussi ete faites et comparees avec les resultats experimentaux du taux de propagation du delaminage. Les resultats numeriques des essais quasi-statiques et de fatigue ont montre une bonne correlation avec les resultats experimentaux pour toute la gamme des mixites des modes I/II etudiee.

Deep eutectic solvent formation: a structural view using molecular dynamics simulations with classical force fields

NASA Astrophysics Data System (ADS)

Mainberger, Sebastian; Kindlein, Moritz; Bezold, Franziska; Elts, Ekaterina; Minceva, Mirjana; Briesen, Heiko

2017-06-01

Deep eutectic solvents (DES) have gained a reputation as inexpensive and easy to handle ionic liquid analogues. This work employs molecular dynamics (MD) to simulate a variety of DES. The hydrogen bond acceptor (HBA) choline chloride was paired with the hydrogen bond donors (HBD) glycerol, 1,4-butanediol, and levulinic acid. Levulinic acid was also paired with the zwitterionic HBA betaine. In order to evaluate the reliability of data MD simulations can provide for DES, two force fields were compared: the Merck Molecular Force Field and the General Amber Force Field with two different sets of partial charges for the latter. The force fields were evaluated by comparing available experimental thermodynamic and transport properties against simulated values. Structural analysis was performed on the eutectic systems and compared to non-eutectic compositions. All force fields could be validated against certain experimental properties, but performance varied depending on the system and property in question. While extensive hydrogen bonding was found for all systems, details about the contribution of individual groups strongly varied among force fields. Interaction potentials revealed that HBA-HBA interactions weaken linearly with increasing HBD ratio, while HBD-HBD interactions grew disproportionally in magnitude, which might hint at the eutectic composition of a system.

Development of a High Level Architecture Federation of Ship Replenishment at Sea

DTIC Science & Technology

2011-10-01

utiliser une infrastructure de simulation appelée architecture de haut niveau (HLA) afin de fournir des environne - ments de simulation interarmées...fournir un environnement de simulation qui modélise l’interactions entre les divers composants afin de simuler les conditions qui mènent aux

Synthesis, molecular docking, DFT calculations and cytotoxicity activity of benzo[g]quinazoline derivatives in choline chloride-urea

NASA Astrophysics Data System (ADS)

Lakshmanan, Sivalingam; Govindaraj, Dharman; Ramalakshmi, Narayanan; Antony, S. Arul

2017-12-01

Green and highly efficient one-pot three component approach for the synthesis of benzo[g]quinazoline derivatives (6a-g) using Choline chloride-urea (DES). Synthesized compounds 6b and 6g showed the most potent biological activity against A549 lung cancer cell line. Docking simulation was performed to position compounds 6b and 6g showed the greater affinity for anaplastic lymphoma kinase (ALK) receptor. Quantum chemical studies were carried out on these compounds to understand the structural features essential for activity using DFT/6-31G level of theory.

Electromagnetic Gauge Study of Laser-Induced Shock Waves in Aluminium Alloys

NASA Astrophysics Data System (ADS)

Peyre, P.; Fabbro, R.

1995-12-01

The laser-shock behaviour of three industrial aluminum alloys has been analyzed with an Electromagnetic Gauge Method (EMV) for measuring the velocity of the back free surface of thin foils submitted to plane laser irradiation. Surface pressure, shock decay in depth and Hugoniot Elastic Limits (HEL) of the materials were investigated with increasing thicknesses of foils to be shocked. First, surface peak pressures values as a function of laser power density gave a good agreement with conventional piezoelectric quartz measurements. Therefore, comparison of experimental results with computer simulations, using a 1D hydrodynamic Lagrangian finite difference code, were also in good accordance. Lastly, HEL values were compared with static and dynamic compressive tests in order to estimate the effects of a very large range of strain rates (10^{-3} s^{-1} to 10^6 s^{-1}) on the mechanical properties of the alloys. Cet article fait la synthèse d'une étude récente sur la caractérisation du comportement sous choc-laser de trois alliages d'aluminium largement utilisés dans l'industrie à travers la méthode dite de la jauge électromagnétique. Cette méthode permet de mesurer les vitesses matérielles induites en face arrière de plaques d'épaisseurs variables par un impact laser. La mise en vitesse de plaques nous a permis, premièrement, de vérifier la validité des pressions d'impact superficielles obtenues en les comparant avec des résultats antérieurs obtenus par des mesures sur capteurs quartz. Sur des plaques d'épaisseurs croissantes, nous avons caractérisé l'atténuation des ondes de choc en profondeur dans les alliages étudiés et mesuré les limites d'élasticité sous choc (pressions d'Hugoniot) des alliages. Les résultats ont été comparés avec succès à des simulations numériques grâce à un code de calcul monodimensionnel Lagrangien. Enfin, les valeurs des pressions d'Hugoniot mesurées ont permis de tracer l'évolution des contraintes d'écoulement plastique en fonction de la vitesse de déformation pour des valeurs comprises entre 10^{-3} s^{-1} et 10^6 s^{-1}.

Modeling complex treatment strategies: construction and validation of a discrete event simulation model for glaucoma.

PubMed

van Gestel, Aukje; Severens, Johan L; Webers, Carroll A B; Beckers, Henny J M; Jansonius, Nomdo M; Schouten, Jan S A G

2010-01-01

Discrete event simulation (DES) modeling has several advantages over simpler modeling techniques in health economics, such as increased flexibility and the ability to model complex systems. Nevertheless, these benefits may come at the cost of reduced transparency, which may compromise the model's face validity and credibility. We aimed to produce a transparent report on the construction and validation of a DES model using a recently developed model of ocular hypertension and glaucoma. Current evidence of associations between prognostic factors and disease progression in ocular hypertension and glaucoma was translated into DES model elements. The model was extended to simulate treatment decisions and effects. Utility and costs were linked to disease status and treatment, and clinical and health economic outcomes were defined. The model was validated at several levels. The soundness of design and the plausibility of input estimates were evaluated in interdisciplinary meetings (face validity). Individual patients were traced throughout the simulation under a multitude of model settings to debug the model, and the model was run with a variety of extreme scenarios to compare the outcomes with prior expectations (internal validity). Finally, several intermediate (clinical) outcomes of the model were compared with those observed in experimental or observational studies (external validity) and the feasibility of evaluating hypothetical treatment strategies was tested. The model performed well in all validity tests. Analyses of hypothetical treatment strategies took about 30 minutes per cohort and lead to plausible health-economic outcomes. There is added value of DES models in complex treatment strategies such as glaucoma. Achieving transparency in model structure and outcomes may require some effort in reporting and validating the model, but it is feasible.

Determination of the dissolution slowness surface by study of etched shapes I. Morphology of the dissolution slowness surface and theoretical etched shapes

NASA Astrophysics Data System (ADS)

Leblois, T.; Tellier, C. R.

1992-07-01

We propose a theoretical model for the anisotropic etching of crystals, in order to be applied in the micromachining. The originality of the model is due to the introduction of dissolution tensors to express the representative surface of the dissolution slowness. The knowledge of the equation of the slowness surface allows us to determine the trajectories of all the elements which compose the starting surface. It is then possible to construct the final etched shape by numerical simulation. Several examples are given in this paper which show that the final etched shapes are correlated to the extrema of the dissolution slowness. Since the slowness surface must be determined from experiments, emphasis is placed on difficulties encountered when we correlate theory to experiments. Nous avons modélisé le processus de dissolution anisotrope des cristaux en vue d'une application à la simulation des formes obtenues par photolithogravure chimique. La principale originalité de ce modèle tient à l'introduction de tenseurs de dissolution pour exprimer la surface représentative de la lenteur de dissolution. La connaissance de l'équation de la lenteur de dissolution permet de calculer les trajectoires des différents éléments constituant la surface de départ puis de reconstituer par simulation la forme dissoute. Les simulations démontrent que les formes limites des cristaux dissous sont corrélées aux extrema de la lenteur de dissolution. La détermination de la surface de la lenteur se faisant à partir de mesures expérimetales, nous nous sommes efforcés de montrer toutes les difficultés attachées à cette analyse.

Can discrete event simulation be of use in modelling major depression?

PubMed Central

Le Lay, Agathe; Despiegel, Nicolas; François, Clément; Duru, Gérard

2006-01-01

Background Depression is among the major contributors to worldwide disease burden and adequate modelling requires a framework designed to depict real world disease progression as well as its economic implications as closely as possible. Objectives In light of the specific characteristics associated with depression (multiple episodes at varying intervals, impact of disease history on course of illness, sociodemographic factors), our aim was to clarify to what extent "Discrete Event Simulation" (DES) models provide methodological benefits in depicting disease evolution. Methods We conducted a comprehensive review of published Markov models in depression and identified potential limits to their methodology. A model based on DES principles was developed to investigate the benefits and drawbacks of this simulation method compared with Markov modelling techniques. Results The major drawback to Markov models is that they may not be suitable to tracking patients' disease history properly, unless the analyst defines multiple health states, which may lead to intractable situations. They are also too rigid to take into consideration multiple patient-specific sociodemographic characteristics in a single model. To do so would also require defining multiple health states which would render the analysis entirely too complex. We show that DES resolve these weaknesses and that its flexibility allow patients with differing attributes to move from one event to another in sequential order while simultaneously taking into account important risk factors such as age, gender, disease history and patients attitude towards treatment, together with any disease-related events (adverse events, suicide attempt etc.). Conclusion DES modelling appears to be an accurate, flexible and comprehensive means of depicting disease progression compared with conventional simulation methodologies. Its use in analysing recurrent and chronic diseases appears particularly useful compared with Markov processes. PMID:17147790

Can discrete event simulation be of use in modelling major depression?

PubMed

Le Lay, Agathe; Despiegel, Nicolas; François, Clément; Duru, Gérard

2006-12-05

Depression is among the major contributors to worldwide disease burden and adequate modelling requires a framework designed to depict real world disease progression as well as its economic implications as closely as possible. In light of the specific characteristics associated with depression (multiple episodes at varying intervals, impact of disease history on course of illness, sociodemographic factors), our aim was to clarify to what extent "Discrete Event Simulation" (DES) models provide methodological benefits in depicting disease evolution. We conducted a comprehensive review of published Markov models in depression and identified potential limits to their methodology. A model based on DES principles was developed to investigate the benefits and drawbacks of this simulation method compared with Markov modelling techniques. The major drawback to Markov models is that they may not be suitable to tracking patients' disease history properly, unless the analyst defines multiple health states, which may lead to intractable situations. They are also too rigid to take into consideration multiple patient-specific sociodemographic characteristics in a single model. To do so would also require defining multiple health states which would render the analysis entirely too complex. We show that DES resolve these weaknesses and that its flexibility allow patients with differing attributes to move from one event to another in sequential order while simultaneously taking into account important risk factors such as age, gender, disease history and patients attitude towards treatment, together with any disease-related events (adverse events, suicide attempt etc.). DES modelling appears to be an accurate, flexible and comprehensive means of depicting disease progression compared with conventional simulation methodologies. Its use in analysing recurrent and chronic diseases appears particularly useful compared with Markov processes.

Design Exception In-Service Monitoring Program Development

DOT National Transportation Integrated Search

2017-05-01

This study evaluates various possible program designs for in-service monitoring of design exceptions (DEs) for the Georgia Department of Transportation. The study recommends a multitier stepwise approach to the evaluation of DEs. Specifically, the pr...

DES Science Portal: II- Creating Science-Ready Catalogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fausti Neto, Angelo; et al.

We present a novel approach for creating science-ready catalogs through a software infrastructure developed for the Dark Energy Survey (DES). We integrate the data products released by the DES Data Management and additional products created by the DES collaboration in an environment known as DES Science Portal. Each step involved in the creation of a science-ready catalog is recorded in a relational database and can be recovered at any time. We describe how the DES Science Portal automates the creation and characterization of lightweight catalogs for DES Year 1 Annual Release, and show its flexibility in creating multiple catalogs withmore » different inputs and configurations. Finally, we discuss the advantages of this infrastructure for large surveys such as DES and the Large Synoptic Survey Telescope. The capability of creating science-ready catalogs efficiently and with full control of the inputs and configurations used is an important asset for supporting science analysis using data from large astronomical surveys.« less

Detached Eddy Simulation of the UH-60 Rotor Wake Using Adaptive Mesh Refinement

NASA Technical Reports Server (NTRS)

Chaderjian, Neal M.; Ahmad, Jasim U.

2012-01-01

Time-dependent Navier-Stokes flow simulations have been carried out for a UH-60 rotor with simplified hub in forward flight and hover flight conditions. Flexible rotor blades and flight trim conditions are modeled and established by loosely coupling the OVERFLOW Computational Fluid Dynamics (CFD) code with the CAMRAD II helicopter comprehensive code. High order spatial differences, Adaptive Mesh Refinement (AMR), and Detached Eddy Simulation (DES) are used to obtain highly resolved vortex wakes, where the largest turbulent structures are captured. Special attention is directed towards ensuring the dual time accuracy is within the asymptotic range, and verifying the loose coupling convergence process using AMR. The AMR/DES simulation produced vortical worms for forward flight and hover conditions, similar to previous results obtained for the TRAM rotor in hover. AMR proved to be an efficient means to capture a rotor wake without a priori knowledge of the wake shape.

Data encryption standard ASIC design and development report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robertson, Perry J.; Pierson, Lyndon George; Witzke, Edward L.

2003-10-01

This document describes the design, fabrication, and testing of the SNL Data Encryption Standard (DES) ASIC. This device was fabricated in Sandia's Microelectronics Development Laboratory using 0.6 {micro}m CMOS technology. The SNL DES ASIC was modeled using VHDL, then simulated, and synthesized using Synopsys, Inc. software and finally IC layout was performed using Compass Design Automation's CAE tools. IC testing was performed by Sandia's Microelectronic Validation Department using a HP 82000 computer aided test system. The device is a single integrated circuit, pipelined realization of DES encryption and decryption capable of throughputs greater than 6.5 Gb/s. Several enhancements accommodate ATMmore » or IP network operation and performance scaling. This design is the latest step in the evolution of DES modules.« less

Towards an entropy-based detached-eddy simulation

NASA Astrophysics Data System (ADS)

Zhao, Rui; Yan, Chao; Li, XinLiang; Kong, WeiXuan

2013-10-01

A concept of entropy increment ratio ( s¯) is introduced for compressible turbulence simulation through a series of direct numerical simulations (DNS). s¯ represents the dissipation rate per unit mechanical energy with the benefit of independence of freestream Mach numbers. Based on this feature, we construct the shielding function f s to describe the boundary layer region and propose an entropy-based detached-eddy simulation method (SDES). This approach follows the spirit of delayed detached-eddy simulation (DDES) proposed by Spalart et al. in 2005, but it exhibits much better behavior after their performances are compared in the following flows, namely, pure attached flow with thick boundary layer (a supersonic flat-plate flow with high Reynolds number), fully separated flow (the supersonic base flow), and separated-reattached flow (the supersonic cavity-ramp flow). The Reynolds-averaged Navier-Stokes (RANS) resolved region is reliably preserved and the modeled stress depletion (MSD) phenomenon which is inherent in DES and DDES is partly alleviated. Moreover, this new hybrid strategy is simple and general, making it applicable to other models related to the boundary layer predictions.

A Discrete Event Simulation Model for Evaluating the Performances of an M/G/C/C State Dependent Queuing System

PubMed Central

Khalid, Ruzelan; M. Nawawi, Mohd Kamal; Kawsar, Luthful A.; Ghani, Noraida A.; Kamil, Anton A.; Mustafa, Adli

2013-01-01

M/G/C/C state dependent queuing networks consider service rates as a function of the number of residing entities (e.g., pedestrians, vehicles, and products). However, modeling such dynamic rates is not supported in modern Discrete Simulation System (DES) software. We designed an approach to cater this limitation and used it to construct the M/G/C/C state-dependent queuing model in Arena software. Using the model, we have evaluated and analyzed the impacts of various arrival rates to the throughput, the blocking probability, the expected service time and the expected number of entities in a complex network topology. Results indicated that there is a range of arrival rates for each network where the simulation results fluctuate drastically across replications and this causes the simulation results and analytical results exhibit discrepancies. Detail results that show how tally the simulation results and the analytical results in both abstract and graphical forms and some scientific justifications for these have been documented and discussed. PMID:23560037

Efficiency of endoscopy units can be improved with use of discrete event simulation modeling.

PubMed

Sauer, Bryan G; Singh, Kanwar P; Wagner, Barry L; Vanden Hoek, Matthew S; Twilley, Katherine; Cohn, Steven M; Shami, Vanessa M; Wang, Andrew Y

2016-11-01

Background and study aims: The projected increased demand for health services obligates healthcare organizations to operate efficiently. Discrete event simulation (DES) is a modeling method that allows for optimization of systems through virtual testing of different configurations before implementation. The objective of this study was to identify strategies to improve the daily efficiencies of an endoscopy center with the use of DES. Methods: We built a DES model of a five procedure room endoscopy unit at a tertiary-care university medical center. After validating the baseline model, we tested alternate configurations to run the endoscopy suite and evaluated outcomes associated with each change. The main outcome measures included adequate number of preparation and recovery rooms, blocked inflow, delay times, blocked outflows, and patient cycle time. Results: Based on a sensitivity analysis, the adequate number of preparation rooms is eight and recovery rooms is nine for a five procedure room unit (total 3.4 preparation and recovery rooms per procedure room). Simple changes to procedure scheduling and patient arrival times led to a modest improvement in efficiency. Increasing the preparation/recovery rooms based on the sensitivity analysis led to significant improvements in efficiency. Conclusions: By applying tools such as DES, we can model changes in an environment with complex interactions and find ways to improve the medical care we provide. DES is applicable to any endoscopy unit and would be particularly valuable to those who are trying to improve on the efficiency of care and patient experience.

Efficiency of endoscopy units can be improved with use of discrete event simulation modeling

PubMed Central

Sauer, Bryan G.; Singh, Kanwar P.; Wagner, Barry L.; Vanden Hoek, Matthew S.; Twilley, Katherine; Cohn, Steven M.; Shami, Vanessa M.; Wang, Andrew Y.

2016-01-01

Background and study aims: The projected increased demand for health services obligates healthcare organizations to operate efficiently. Discrete event simulation (DES) is a modeling method that allows for optimization of systems through virtual testing of different configurations before implementation. The objective of this study was to identify strategies to improve the daily efficiencies of an endoscopy center with the use of DES. Methods: We built a DES model of a five procedure room endoscopy unit at a tertiary-care university medical center. After validating the baseline model, we tested alternate configurations to run the endoscopy suite and evaluated outcomes associated with each change. The main outcome measures included adequate number of preparation and recovery rooms, blocked inflow, delay times, blocked outflows, and patient cycle time. Results: Based on a sensitivity analysis, the adequate number of preparation rooms is eight and recovery rooms is nine for a five procedure room unit (total 3.4 preparation and recovery rooms per procedure room). Simple changes to procedure scheduling and patient arrival times led to a modest improvement in efficiency. Increasing the preparation/recovery rooms based on the sensitivity analysis led to significant improvements in efficiency. Conclusions: By applying tools such as DES, we can model changes in an environment with complex interactions and find ways to improve the medical care we provide. DES is applicable to any endoscopy unit and would be particularly valuable to those who are trying to improve on the efficiency of care and patient experience. PMID:27853739

Discrete Event Simulation-Based Resource Modelling in Health Technology Assessment.

PubMed

Salleh, Syed; Thokala, Praveen; Brennan, Alan; Hughes, Ruby; Dixon, Simon

2017-10-01

The objective of this article was to conduct a systematic review of published research on the use of discrete event simulation (DES) for resource modelling (RM) in health technology assessment (HTA). RM is broadly defined as incorporating and measuring effects of constraints on physical resources (e.g. beds, doctors, nurses) in HTA models. Systematic literature searches were conducted in academic databases (JSTOR, SAGE, SPRINGER, SCOPUS, IEEE, Science Direct, PubMed, EMBASE) and grey literature (Google Scholar, NHS journal library), enhanced by manual searchers (i.e. reference list checking, citation searching and hand-searching techniques). The search strategy yielded 4117 potentially relevant citations. Following the screening and manual searches, ten articles were included. Reviewing these articles provided insights into the applications of RM: firstly, different types of economic analyses, model settings, RM and cost-effectiveness analysis (CEA) outcomes were identified. Secondly, variation in the characteristics of the constraints such as types and nature of constraints and sources of data for the constraints were identified. Thirdly, it was found that including the effects of constraints caused the CEA results to change in these articles. The review found that DES proved to be an effective technique for RM but there were only a small number of studies applied in HTA. However, these studies showed the important consequences of modelling physical constraints and point to the need for a framework to be developed to guide future applications of this approach.

Photometric Supernova Classification with Machine Learning

NASA Astrophysics Data System (ADS)

Lochner, Michelle; McEwen, Jason D.; Peiris, Hiranya V.; Lahav, Ofer; Winter, Max K.

2016-08-01

Automated photometric supernova classification has become an active area of research in recent years in light of current and upcoming imaging surveys such as the Dark Energy Survey (DES) and the Large Synoptic Survey Telescope, given that spectroscopic confirmation of type for all supernovae discovered will be impossible. Here, we develop a multi-faceted classification pipeline, combining existing and new approaches. Our pipeline consists of two stages: extracting descriptive features from the light curves and classification using a machine learning algorithm. Our feature extraction methods vary from model-dependent techniques, namely SALT2 fits, to more independent techniques that fit parametric models to curves, to a completely model-independent wavelet approach. We cover a range of representative machine learning algorithms, including naive Bayes, k-nearest neighbors, support vector machines, artificial neural networks, and boosted decision trees (BDTs). We test the pipeline on simulated multi-band DES light curves from the Supernova Photometric Classification Challenge. Using the commonly used area under the curve (AUC) of the Receiver Operating Characteristic as a metric, we find that the SALT2 fits and the wavelet approach, with the BDTs algorithm, each achieve an AUC of 0.98, where 1 represents perfect classification. We find that a representative training set is essential for good classification, whatever the feature set or algorithm, with implications for spectroscopic follow-up. Importantly, we find that by using either the SALT2 or the wavelet feature sets with a BDT algorithm, accurate classification is possible purely from light curve data, without the need for any redshift information.

Direct simulation of groundwater transit-time distributions using the reservoir theory

NASA Astrophysics Data System (ADS)

Etcheverry, David; Perrochet, Pierre

Groundwater transit times are of interest for the management of water resources, assessment of pollution from non-point sources, and quantitative dating of groundwaters by the use of environmental isotopes. The age of water is the time water has spent in an aquifer since it has entered the system, whereas the transit time is the age of water as it exits the system. Water at the outlet of an aquifer is a mixture of water elements with different transit times, as a consequence of the different flow-line lengths. In this paper, transit-time distributions are calculated by coupling two existing methods, the reservoir theory and a recent age-simulation method. Based on the derivation of the cumulative age distribution over the whole domain, the approach accounts for the whole hydrogeological framework. The method is tested using an analytical example and its applicability illustrated for a regional layered aquifer. Results show the asymmetry and multimodality of the transit-time distribution even in advection-only conditions, due to the aquifer geometry and to the velocity-field heterogeneity. Résumé Les temps de transit des eaux souterraines sont intéressants à connaître pour gérer l'évaluation des ressources en eau dans le cas de pollution à partir de sources non ponctuelles, et aussi pour dater quantitativement les eaux souterraines au moyen des isotopes du milieu. L'âge de l'eau est le temps qu'elle a passé dans un aquifère depuis qu'elle est entrée dans le système, alors que le temps de transit est l'âge de l'eau au moment où elle quitte le système. L'eau à la sortie d'un aquifère est un mélange d'eaux possédant différents temps de transit, du fait des longueurs différentes des lignes de courant suivies. Dans ce papier, les distributions des temps de transit sont calculées en couplant deux méthodes, la théorie du réservoir et une méthode récente de simulation des âges. Basée sur la dérivation de la distribution cumulées des âges sur tout le domaine, l'approche prend en compte le cadre hydrogéologique dans son ensemble. La méthode est testée sur un exemple analytique et son applicabilité est illustrée pour un aquifère stratifié régional. Les résultats montrent l'asymétrie et la plurimodalité de la distribution des temps de transit même dans des conditions uniquement d'advection, à cause de la géométrie de l'aquifère et de l'hétérogénéité du champ des vitesses. Resumen El estudio de los tiempos de tránsito del agua subterránea es muy útil para (1) la gestión de los recursos de agua frente a la contaminación por focos no puntuales, y (2) la datación de aguas mediante isótopos ambientales. La edad de un agua subterránea es el tiempo que ésta ha permanecido en el acuífero contada desde el momento de su entrada, mientras que el tiempo de tránsito corresponde a la edad del agua en el momento en que abandona el sistema. En el punto de descarga en realidad se encuentra una mezcla de aguas con distintos tiempos de tránsito, debido a la yuxtaposición de líneas de flujo con diferentes recorridos. En este artículo se calculan las distribuciones de tiempos de tránsito mediante el acoplamiento de dos métodos ya existentes: la teoría de embalse y un método reciente de simulación de edades. El método se basa en la derivación de la distribución acumulada de edades, y es aplicable en todo el dominio hidrogeológico. El método se ha probado en un ejemplo analítico, y su aplicabilidad se muestra para un acuífero estratificado. Como resultado se obtiene que, aun en el caso de flujo exclusivamente advectivo, la distribución de tiempos de tránsito es asimétrica y multimodal debido a la geometría del acuífero y a la heterogeneidad del campo de velocidades.

Simulation of granular and gas-solid flows using discrete element method

NASA Astrophysics Data System (ADS)

Boyalakuntla, Dhanunjay S.

2003-10-01

In recent years there has been increased research activity in the experimental and numerical study of gas-solid flows. Flows of this type have numerous applications in the energy, pharmaceuticals, and chemicals process industries. Typical applications include pulverized coal combustion, flow and heat transfer in bubbling and circulating fluidized beds, hopper and chute flows, pneumatic transport of pharmaceutical powders and pellets, and many more. The present work addresses the study of gas-solid flows using computational fluid dynamics (CFD) techniques and discrete element simulation methods (DES) combined. Many previous studies of coupled gas-solid flows have been performed assuming the solid phase as a continuum with averaged properties and treating the gas-solid flow as constituting of interpenetrating continua. Instead, in the present work, the gas phase flow is simulated using continuum theory and the solid phase flow is simulated using DES. DES treats each solid particle individually, thus accounting for its dynamics due to particle-particle interactions, particle-wall interactions as well as fluid drag and buoyancy. The present work involves developing efficient DES methods for dense granular flow and coupling this simulation to continuum simulations of the gas phase flow. Simulations have been performed to observe pure granular behavior in vibrating beds. Benchmark cases have been simulated and the results obtained match the published literature. The dimensionless acceleration amplitude and the bed height are the parameters governing bed behavior. Various interesting behaviors such as heaping, round and cusp surface standing waves, as well as kinks, have been observed for different values of the acceleration amplitude for a given bed height. Furthermore, binary granular mixtures (granular mixtures with two particle sizes) in a vibrated bed have also been studied. Gas-solid flow simulations have been performed to study fluidized beds. Benchmark 2D fluidized bed simulations have been performed and the results have been shown to satisfactorily compare with those published in the literature. A comprehensive study of the effect of drag correlations on the simulation of fluidized beds has been performed. It has been found that nearly all the drag correlations studied make similar predictions of global quantities such as the time-dependent pressure drop, bubbling frequency and growth. In conclusion, discrete element simulation has been successfully coupled to continuum gas-phase. Though all the results presented in the thesis are two-dimensional, the present implementation is completely three dimensional and can be used to study 3D fluidized beds to aid in better design and understanding. Other industrially important phenomena like particle coating, coal gasification etc., and applications in emerging areas such as nano-particle/fluid mixtures can also be studied through this type of simulation. (Abstract shortened by UMI.)

Unsteady RANS/DES analysis of flow around helicopter rotor blades at forword flight conditions

NASA Astrophysics Data System (ADS)

Zhang, Zhenyu; Qian, Yaoru

2018-05-01

In this paper, the complex flows around forward-flying helicopter blades are numerically investigated. Both the Reynolds-averaged Navier-Stokes (RANS) and the Detached Eddy Simulation (DES) methods are used for the analysis of characteristics like local dynamic flow separation, effects of radial sweeping and reversed flow. The flow was solved by a highly efficient finite volume solver with multi-block structured grids. Focusing upon the complexity of the advance ratio effects, above properties are fully recognized. The current results showed significant agreements between both RANS and DES methods at phases with attached flow phases. Detailed information of separating flow near the withdrawal phases are given by DES results. The flow analysis of these blades under reversed flow reveals a significant interaction between the reversed flow and the span-wise sweeping.

A physiology-based model describing heterogeneity in glucose metabolism: the core of the Eindhoven Diabetes Education Simulator (E-DES).

PubMed

Maas, Anne H; Rozendaal, Yvonne J W; van Pul, Carola; Hilbers, Peter A J; Cottaar, Ward J; Haak, Harm R; van Riel, Natal A W

2015-03-01

Current diabetes education methods are costly, time-consuming, and do not actively engage the patient. Here, we describe the development and verification of the physiological model for healthy subjects that forms the basis of the Eindhoven Diabetes Education Simulator (E-DES). E-DES shall provide diabetes patients with an individualized virtual practice environment incorporating the main factors that influence glycemic control: food, exercise, and medication. The physiological model consists of 4 compartments for which the inflow and outflow of glucose and insulin are calculated using 6 nonlinear coupled differential equations and 14 parameters. These parameters are estimated on 12 sets of oral glucose tolerance test (OGTT) data (226 healthy subjects) obtained from literature. The resulting parameter set is verified on 8 separate literature OGTT data sets (229 subjects). The model is considered verified if 95% of the glucose data points lie within an acceptance range of ±20% of the corresponding model value. All glucose data points of the verification data sets lie within the predefined acceptance range. Physiological processes represented in the model include insulin resistance and β-cell function. Adjusting the corresponding parameters allows to describe heterogeneity in the data and shows the capabilities of this model for individualization. We have verified the physiological model of the E-DES for healthy subjects. Heterogeneity of the data has successfully been modeled by adjusting the 4 parameters describing insulin resistance and β-cell function. Our model will form the basis of a simulator providing individualized education on glucose control. © 2014 Diabetes Technology Society.

Surface Pb nanoparticle aggregation, coalescence and differential capacitance in a deep eutectic solvent using a simultaneous sample-rotated small angle x-ray scattering and electrochemical methods approach [Surface Pb nanoparticle aggregation, coalescence and differential capacitance in a deep eutectic solvent using a simultaneous grazing transmission small angle x-ray scattering and electrochemical methods approach

DOE PAGES

Hammons, Joshua A.; Ilavsky, Jan

2017-01-18

Nanoparticle electrodeposition is a simple and scalable approach to synthesizing supported nanoparticles. Used with a deep eutectic solvent (DES), surface nanoparticles can be assembled and exhibit unique surface charge separation when the DES is adsorbed on the nanoparticle surface. Key to understanding and controlling the assembly and the capacitance is a thorough understanding of surface particle mobility and charge screening, which requires an in-situ approach. In this study, Pb particle formation, size, shape and capacitance are resolved in a 1:2 choline Cl –: urea deep eutectic solvent whilst sweeping the cell potential in the range: 0.2 V to –1.2 Vmore » (vs. Ag/AgCl). These system parameters were resolved using a complementary suite of sample-rotated small angle X-ray scattering (SR-SAXS) and electrochemical impedance spectroscopy (EIS), which are presented and discussed in detail. This approach is able to show that both particle and ion transport are impeded in the DES, as aggregation occurs over the course of 6 minutes, and dissolved Pb ions accumulate and remain near the surface after a nucleation pulse is applied. The DES-Pb interactions strongly depend on the cell potential as evidenced by the specific differential capacitance of the Pb deposit, which has a maximum value of 2.5 +/– 0.5 F g –1 at –1.0 V vs. Ag/AgCl. Together, the SR-SAXS-EIS approach is able to characterize the unique nanoparticle capacitance, mobility and ion mobility in a DES and can be used to study a wide range of nanoparticle deposition systems in-situ.« less

Surface Pb nanoparticle aggregation, coalescence and differential capacitance in a deep eutectic solvent using a simultaneous sample-rotated small angle x-ray scattering and electrochemical methods approach [Surface Pb nanoparticle aggregation, coalescence and differential capacitance in a deep eutectic solvent using a simultaneous grazing transmission small angle x-ray scattering and electrochemical methods approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammons, Joshua A.; Ilavsky, Jan

Nanoparticle electrodeposition is a simple and scalable approach to synthesizing supported nanoparticles. Used with a deep eutectic solvent (DES), surface nanoparticles can be assembled and exhibit unique surface charge separation when the DES is adsorbed on the nanoparticle surface. Key to understanding and controlling the assembly and the capacitance is a thorough understanding of surface particle mobility and charge screening, which requires an in-situ approach. In this study, Pb particle formation, size, shape and capacitance are resolved in a 1:2 choline Cl –: urea deep eutectic solvent whilst sweeping the cell potential in the range: 0.2 V to –1.2 Vmore » (vs. Ag/AgCl). These system parameters were resolved using a complementary suite of sample-rotated small angle X-ray scattering (SR-SAXS) and electrochemical impedance spectroscopy (EIS), which are presented and discussed in detail. This approach is able to show that both particle and ion transport are impeded in the DES, as aggregation occurs over the course of 6 minutes, and dissolved Pb ions accumulate and remain near the surface after a nucleation pulse is applied. The DES-Pb interactions strongly depend on the cell potential as evidenced by the specific differential capacitance of the Pb deposit, which has a maximum value of 2.5 +/– 0.5 F g –1 at –1.0 V vs. Ag/AgCl. Together, the SR-SAXS-EIS approach is able to characterize the unique nanoparticle capacitance, mobility and ion mobility in a DES and can be used to study a wide range of nanoparticle deposition systems in-situ.« less

Quantification of free and total desmosine and isodesmosine in human urine by liquid chromatography tandem mass spectrometry: a comparison of the surrogate-analyte and the surrogate-matrix approach for quantitation.

PubMed

Ongay, Sara; Hendriks, Gert; Hermans, Jos; van den Berge, Maarten; ten Hacken, Nick H T; van de Merbel, Nico C; Bischoff, Rainer

2014-01-24

In spite of the data suggesting the potential of urinary desmosine (DES) and isodesmosine (IDS) as biomarkers for elevated lung elastic fiber turnover, further validation in large-scale studies of COPD populations, as well as the analysis of longitudinal samples is required. Validated analytical methods that allow the accurate and precise quantification of DES and IDS in human urine are mandatory in order to properly evaluate the outcome of such clinical studies. In this work, we present the development and full validation of two methods that allow DES and IDS measurement in human urine, one for the free and one for the total (free+peptide-bound) forms. To this end we compared the two principle approaches that are used for the absolute quantification of endogenous compounds in biological samples, analysis against calibrators containing authentic analyte in surrogate matrix or containing surrogate analyte in authentic matrix. The validated methods were employed for the analysis of a small set of samples including healthy never-smokers, healthy current-smokers and COPD patients. This is the first time that the analysis of urinary free DES, free IDS, total DES, and total IDS has been fully validated and that the surrogate analyte approach has been evaluated for their quantification in biological samples. Results indicate that the presented methods have the necessary quality and level of validation to assess the potential of urinary DES and IDS levels as biomarkers for the progression of COPD and the effect of therapeutic interventions. Copyright © 2014 Elsevier B.V. All rights reserved.

Prediction of the period of psychotic episode in individual schizophrenics by simulation-data construction approach.

PubMed

Huang, Chun-Jung; Wang, Hsiao-Fan; Chiu, Hsien-Jane; Lan, Tsuo-Hung; Hu, Tsung-Ming; Loh, El-Wui

2010-10-01

Although schizophrenia can be treated, most patients still experience inevitable psychotic episodes from time to time. Precautious actions can be taken if the next onset can be predicted. However, sufficient information is always lacking in the clinical scenario. A possible solution is to use the virtual data generated from limited of original data. Data construction method (DCM) has been shown to generate the virtual felt earthquake data effectively and used in the prediction of further events. Here we investigated the performance of DCM in deriving the membership functions and discrete-event simulations (DES) in predicting the period embracing the initiation and termination time-points of the next psychotic episode of 35 individual schizophrenic patients. The results showed that 21 subjects had a success of simulations (RSS) ≥70%. Further analysis demonstrated that the co-morbidity of coronary heart diseases (CHD), risks of CHD, and the frequency of previous psychotic episodes increased the RSS.

A New Approach to Electrical Characterization of Exploding Foil Initiators

DTIC Science & Technology

1998-12-01

processed to illustrate the methodology. RESUME Dans une etude precedente de 1a caracterisation electrique des detonateurs a element projete (DEP), on a...applicable a 1a caracterisation electrique des DEP et decrit la methodologie experimentale adequate. Cette methodologie est illustree par la

Dynamique moléculaire et canaux ioniques

NASA Astrophysics Data System (ADS)

Crouzy, S.

2005-11-01

Diffusion de neutrons et Dynamique Moléculaire (DM) sont deux techniques intimement liées car elles portent sur les mêmes échelles de temps: la première apporte des informations structurales ou dynamiques sur le système physique ou biologique, la seconde permet de décoder ces informations à travers un modèle facilitant l'interprétation des résultats. Au delà de l'intérêt que la technique de DM peut avoir en relation directe avec les neutrons, il est intéressant de comprendre comment les modèles sont construits et comment les techniques de simulation peuvent aller beaucoup plus loin que de simples modélisations. Nous décrirons brièvement, dans la suite de cet exposé, la technique de DM et les méthodes plus sophistiquées de calculs d'énergie libre et de potentiels de force moyenne à partir des simulations de DM. Puis nous verrons avec deux exemples tirés de nos travaux théoriques sur les canaux ioniques comment ces calculs peuvent nous donner accès à des vitesses de réaction ou des constantes d'affinité ou de liaison. La première étude porte sur un analogue de la gramicidine A qui forme un canal conducteur d'ions interrompus par le basculement d'un cycle dioxolane [1]. La seconde concerne le canal potassique KcsA dont nous avons étudié le blocage du coté extracellulaire par l'ion Tetra Ethyl Ammonium [2].

Delivery of large biopharmaceuticals from cardiovascular stents: a review

PubMed Central

Takahashi, Hironobu; Letourneur, Didier; Grainger, David W.

2008-01-01

This review focuses on the new and emerging large-molecule bioactive agents delivered from stent surfaces in drug-eluting stents (DES) to inhibit vascular restenosis in the context of interventional cardiology. New therapeutic agents representing proteins, nucleic acids (small interfering RNAs and large DNA plasmids), viral delivery vectors and even engineered cell therapies require specific delivery designs distinct from traditional smaller molecule approaches on DES. While small molecules are currently the clinical standard for coronary stenting, extension of the DES to other lesion types, peripheral vasculature and non-vasculature therapies will seek to deliver an increasingly sophisticated armada of drug types. This review describes many of the larger molecule and biopharmaceutical approaches reported recently for stent-based delivery with the challenges associated with formulating and delivering these drug classes compared to the current small molecule drugs. It also includes perspectives on possible future applications that may improve safety and efficacy and facilitate diversification of the DES to other clinical applications. PMID:17929968

Technologies for Future Precision Strike Missile Systems (les Technologies des futurs systemes de missiles pour frappe de precision)

DTIC Science & Technology

2001-07-01

hardware - in - loop (HWL) simulation is also developed...Firings / Engine Tests Structure Test Hardware In - Loop Simulation Subsystem Test Lab Tests Seeker Actuators Sensors Electronics Propulsion Model Aero Model...Structure Test Hardware In - Loop Simulation Subsystem Test Lab Tests Seeker Actuators Sensors Electronics Propulsion Model Aero Model Model

Statistical Results Concerning the Precision of the Methods of Correlation and Interpolation Sub-Pixel Used in Video PIV

DTIC Science & Technology

1998-08-27

serait compI~ men - taire du logiciel "ferm6" du sysf~me dle PlY commercial et qui permettrait d𔄀tudier la pr6cision des math odes dle traitement...de rNaxNt piels antu pourts chauepixelr un nivea des grnis contaont (modanlisa iped 0.5 - R0 .2/9 0.570 Simulations num6riques par une repr~sentation

Adsorption de gaz sur les materiaux microporeux modelisation, thermodynamique et applications

NASA Astrophysics Data System (ADS)

Richard, Marc-Andre

2009-12-01

Nos travaux sur l'adsorption de gaz dans les materiaux microporeux s'inscrivent dans le cadre des recherches visant a augmenter l'efficacite du stockage de l'hydrogene a bord des vehicules. Notre objectif etait d'etudier la possibilite d'utiliser l'adsorption afin d'ameliorer l'efficacite de la liquefaction de l'hydrogene des systemes a petite echelle. Nous avons egalement evalue les performances d'un systeme de stockage cryogenique de l'hydrogene base sur la physisorption. Comme nous avons affaire a des plages de temperatures particulierement etendues et a de hautes pressions dans la region supercritique du gaz, nous avons du commencer par travailler sur la modelisation et la thermodynamique de l'adsorption. La representation de la quantite de gaz adsorbee en fonction de la temperature et de la pression par un modele semi-empirique est un outil utile pour determiner la masse de gaz adsorbee dans un systeme mais egalement pour calculer les effets thermiques lies a l'adsorption. Nous avons adapte le modele Dubinin-Astakhov (D-A) pour modeliser des isothermes d'adsorption d'hydrogene, d'azote et de methane sur du charbon actif a haute pression et sur une grande plage de temperatures supercritiques en considerant un volume d'adsorption invariant. Avec cinq parametres de regression (incluant le volume d'adsorption Va), le modele que nous avons developpe permet de tres bien representer des isothermes experimentales d'adsorption d'hydrogene (de 30 a 293 K, jusqu'a 6 MPa), d'azote (de 93 a 298 K, jusqu'a 6 MPa) et de methane (de 243 a 333 K, jusqu'a 9 MPa) sur le charbon actif. Nous avons calcule l'energie interne de la phase adsorbee a partir du modele en nous servant de la thermodynamique des solutions sans negliger le volume d'adsorption. Par la suite, nous avons presente les equations de conservation de la niasse et de l'energie pour un systeme d'adsorption et valide notre demarche en comparant des simulations et des tests d'adsorption et de desorption. En plus de l'energie interne, nous avons evalue l'entropie, l'energie differentielle d'adsorption et la chaleur isosterique d'adsorption. Nous avons etudie la performance d'un systeme de stockage d'hydrogene par adsorption pour les vehicules. La capacite de stockage d'hydrogene et les performances thermiques d'un reservoir de 150 L contenant du charbon actif Maxsorb MSC-30(TM) (surface specifique ˜ 3000 m2/g) ont ete etudiees sur une plage de temperatures de 60 a 298 K et a des pressions allant jusqu'a 35 MPa. Le systeme a ete considere de facon globale, sans nous attarder a un design particulier. Il est possible de stocker 5 kg d'hydrogene a des pressions de 7.8, 15.2 et 29 MPa pour des temperatures respectivement de 80, 114 et 172 K, lorsqu'on recupere l'hydrogene residuel a 2.5 bars en le chauffant. La simulation des phenomenes thermiques nous a permis d'analyser le refroidissement necessaire lors du remplissage, le chauffage lors de la decharge et le temps de dormance. Nous avons developpe un cycle de liquefaction de l'hydrogene base sur l'adsorption avec compression mecanique (ACM) et avons evalue sa faisabilite. L'objectif etait d'augmenter sensiblement l'efficacite des systemes de liquefaction de l'hydrogene a petite echelle (moins d'une tonne/jour) et ce, sans en augmenter le cout en capital. Nous avons adapte le cycle de refrigeration par ACM afin qu'il puisse par la suite etre ajoute a un cycle de liquefaction de l'hydrogene. Nous avons ensuite simule des cycles idealises de refrigeration par ACM. Meme dans ces conditions ideales, la refrigeration specifique est faible. De plus, l'efficacite theorique maximale de ces cycles de refrigeration est d'environ 20 a 30% de l'ideal. Nous avons realise experimentalement un cycle de refrigeration par ACM avec le couple azote/charbon actif. (Abstract shortened by UMI.)

Using Discrete-Event Simulation to Promote Quality Improvement and Efficiency in a Radiation Oncology Treatment Center.

PubMed

Famiglietti, Robin M; Norboge, Emily C; Boving, Valentine; Langabeer, James R; Buchholz, Thomas A; Mikhail, Osama

To meet demand for radiation oncology services and ensure patient-centered safe care, management in an academic radiation oncology department initiated quality improvement efforts using discrete-event simulation (DES). Although the long-term goal was testing and deploying solutions, the primary aim at the outset was characterizing and validating a computer simulation model of existing operations to identify targets for improvement. The adoption and validation of a DES model of processes and procedures affecting patient flow and satisfaction, employee experience, and efficiency were undertaken in 2012-2013. Multiple sources were tapped for data, including direct observation, equipment logs, timekeeping, and electronic health records. During their treatment visits, patients averaged 50.4 minutes in the treatment center, of which 38% was spent in the treatment room. Patients with appointments between 10 AM and 2 PM experienced the longest delays before entering the treatment room, and those in the clinic in the day's first and last hours, the shortest (<5 minutes). Despite staffed for 14.5 hours daily, the clinic registered only 20% of patients after 2:30 PM. Utilization of equipment averaged 58%, and utilization of staff, 56%. The DES modeling quantified operations, identifying evidence-based targets for next-phase remediation and providing data to justify initiatives.

Singularités de Van Hove des transitions inter sous-bande dans les détecteurs infrarouge à multipuits quantiques (MPQ)

NASA Astrophysics Data System (ADS)

Le Rouzo, J.; Ribet-Mohamed, I.; Haidar, R.; Guérineau, N.; Tauvy, M.; Rosencher, E.

2006-10-01

Des mesures de réponse spectrale à très grande dynamique ont été réalisées sur des détecteurs infrarouge à MPQ. Ces mesures montrent la présence de structures spectrales qui n'ont jamais été observées jusqu'alors. Basés sur un modèle de Kronig-Penney, classiquement utilisé dans les structures périodiques, nos résultats de simulation permettent d'attribuer sans ambiguïté ces structures à la présence de mini bandes d'énergie. De plus les exaltations de réponse en bord de bande correspondent à des singularités de Van Hove. Ce résultat important ouvre de nombreuses perspectives dans le domaine de la détection infrarouge.

Use of DES in mildly separated internal flow: dimples in a turbulent channel

NASA Astrophysics Data System (ADS)

Tay, Chien Ming Jonathan; Khoo, Boo Cheong; Chew, Yong Tian

2017-12-01

Detached eddy simulation (DES) is investigated as a means to study an array of shallow dimples with depth to diameter ratios of 1.5% and 5% in a turbulent channel. The DES captures large-scale flow features relatively well, but is unable to predict skin friction accurately due to flow modelling near the wall. The current work instead relies on the accuracy of DES to predict large-scale flow features, as well as its well-documented reliability in predicting flow separation regions to support the proposed mechanism that dimples reduce drag by introducing spanwise flow components near the wall through the addition of streamwise vorticity. Profiles of the turbulent energy budget show the stabilising effect of the dimples on the flow. The presence of flow separation however modulates the net drag reduction. Increasing the Reynolds number can reduce the size of the separated region and experiments show that this increases the overall drag reduction.

History of the treatment of scapula fractures.

PubMed

Bartonícek, Jan; Cronier, Patrick

2010-01-01

The history of treatment of scapula fractures is closely connected with the history of the French surgery. Paré (Les œuvres d´Ambroise Paré, conseiller, et premier chirurgien du Roy, Gabriel Buon, Paris, p VCV, 1579), Petit (Traité des maladies des os. Tome second, Charles-Etienne Hochereau, Paris, pp 122–138, 1723), Du Verney (Traité des maladies des os. Tome I, de Burre, Paris, pp 220–231, 1751) and Desault (Œuvres chirurgicales, ou tableau de la doctrine et de la pratique dans le traitement des maladies externes par Xav. Bichat, Desault, Méquignon, Devilliers, Deroi, Paris, pp 98–106, 1798) were the first to point out the existence of these fractures. The first drawing of a scapula fracture was presented by Vogt (Dissertatio de ambarum scapularum dextroeque simul claviculae fractura rara, Dissertatione Universitae Vitembergensi, Wittenberg, 1799). This author was also the first to describe the scapula fracture associated with ipsilateral fracture of the clavicle. The first radiograph of scapula fracture (glenoid fossa fracture) was published by Struthers (Edinburgh Med J 4(3):147–149, 1910). The first internal fixation of scapula fracture using plate was done by Lambotte (1910) who was followed by Lane (The operative treatment of fractures, Medical Publishing Co, London, pp 99–101, 1914) and later by Lenormant (Sur l´ostéosynthèse dans certains fractures de l´omoplate Bulletins et mémoires de la Société de chirgie de Paris, pp 1501–1502, 1923), Dujarier (Fracture du col chirgical de l´omoplate. Ostéosynthèse par plaque en T. Bonne réduction. Bulletin et mémoires de la Société de chirurgie de Paris, pp 1492–1493, 1923) and Basset (Ostéosynthèse d´une fracture de l´omoplate. Bulletin et mémoires de la Société nationale de chirurgie. p 193, 1924). Dupont and Evrard (J Chir (Paris) 39:528–534, 1932) presented the first detailed description of the surgical approach along the lateral border of the scapula including two drawings. They were also the first to use the term “pillar of scapula”. Judet (Acta Orthop Belg 30:673–678, 1964) advocated operative treatment of displaced scapula fractures and described extensile posterior approach. Based on the French school, AO/ASIF improved methods of internal fixation of these fractures.

Two Desmin Gene Mutations Associated with Myofibrillar Myopathies in Polish Families

PubMed Central

Berdynski, Mariusz; Sikorska, Agata; Filipek, Slawomir; Redowicz, Maria Jolanta; Kaminska, Anna; Zekanowski, Cezary

2014-01-01

Desmin is a muscle-specific intermediate filament protein which forms a network connecting the sarcomere, T tubules, sarcolemma, nuclear membrane, mitochondria and other organelles. Mutations in the gene coding for desmin (DES) cause skeletal myopathies often combined with cardiomyopathy, or isolated cardiomyopathies. The molecular pathomechanisms of the disease remain ambiguous. Here, we describe and comprehensively characterize two DES mutations found in Polish patients with a clinical diagnosis of desminopathy. The study group comprised 16 individuals representing three families. Two mutations were identified: a novel missense mutation (Q348P) and a small deletion of nine nucleotides (A357_E359del), previously described by us in the Polish population. A common ancestry of all the families bearing the A357_E359del mutation was confirmed. Both mutations were predicted to be pathogenic using a bioinformatics approach, including molecular dynamics simulations which helped to rationalize abnormal behavior at molecular level. To test the impact of the mutations on DES expression and the intracellular distribution of desmin muscle biopsies were investigated. Elevated desmin levels as well as its atypical localization in muscle fibers were observed. Additional staining for M-cadherin, α-actinin, and myosin heavy chains confirmed severe disruption of myofibrill organization. The abnormalities were more prominent in the Q348P muscle, where both small atrophic fibers as well large fibers with centrally localized nuclei were observed. We propose that the mutations affect desmin structure and cause its aberrant folding and subsequent aggregation, triggering disruption of myofibrils organization. PMID:25541946

A generic discrete-event simulation model for outpatient clinics in a large public hospital.

PubMed

Weerawat, Waressara; Pichitlamken, Juta; Subsombat, Peerapong

2013-01-01

The orthopedic outpatient department (OPD) ward in a large Thai public hospital is modeled using Discrete-Event Stochastic (DES) simulation. Key Performance Indicators (KPIs) are used to measure effects across various clinical operations during different shifts throughout the day. By considering various KPIs such as wait times to see doctors, percentage of patients who can see a doctor within a target time frame, and the time that the last patient completes their doctor consultation, bottlenecks are identified and resource-critical clinics can be prioritized. The simulation model quantifies the chronic, high patient congestion that is prevalent amongst Thai public hospitals with very high patient-to-doctor ratios. Our model can be applied across five different OPD wards by modifying the model parameters. Throughout this work, we show how DES models can be used as decision-support tools for hospital management.

"DEP'ART." Un Modele de Prevision des Departs des Enseignants. Documents Demographie Scolaire 9-16 ("DEP'ART." A Model for Predicting Teacher Attrition. Scholastic Demographic Document 9-16).

ERIC Educational Resources Information Center

Meublat, Guy

This document forms part of a research project initiated by the Ministry of Education in Quebec and designed to forecast teacher demand over the next 15 years. It analyzes the problem of identifying potential teacher dropouts by means of a statistical model which provides simulations of various hypotheses and which can be easily revised by the…

Evaluation of Simulated RADARSAT-2 Polarimetry Products

DTIC Science & Technology

2007-09-01

comparativement à l’utilisation d’un radar monocanal pour détecter des navires ainsi que les avantages possibles de la décomposition des cibles polarimétriques...calculation of the ROC can be applied to any designed probability of false alarm, such as PFA = 10-9, provided there are enough ocean samples available. The... designation , trade name, military project code name, geographic location may also be included. If possible keywords should be selected from a published

Design, Performance, and Operation of Efficient Ramjet/Scramjet Combined Cycle Hypersonic Propulsion

DTIC Science & Technology

2009-10-16

simulations, the blending of the RANS and LES portions is handled by the standard DES equations, now referred to as DES97. The one-equation Spalart...think that RANS can capture these dynamics. • Much remains to be learned about how to model chemistry-turbulence interactions in scramjet flows...BILLIG, F. S., R. BAURLE, AND C. TAM 1999 Design and Analysis of Streamline Traced Hypersonic Inlets. AIAA Paper 1999-4974. BILLIG, F.S., AND

Dark Energy Survey Year 1 results: curved-sky weak lensing mass map

NASA Astrophysics Data System (ADS)

Chang, C.; Pujol, A.; Mawdsley, B.; Bacon, D.; Elvin-Poole, J.; Melchior, P.; Kovács, A.; Jain, B.; Leistedt, B.; Giannantonio, T.; Alarcon, A.; Baxter, E.; Bechtol, K.; Becker, M. R.; Benoit-Lévy, A.; Bernstein, G. M.; Bonnett, C.; Busha, M. T.; Rosell, A. Carnero; Castander, F. J.; Cawthon, R.; da Costa, L. N.; Davis, C.; De Vicente, J.; DeRose, J.; Drlica-Wagner, A.; Fosalba, P.; Gatti, M.; Gaztanaga, E.; Gruen, D.; Gschwend, J.; Hartley, W. G.; Hoyle, B.; Huff, E. M.; Jarvis, M.; Jeffrey, N.; Kacprzak, T.; Lin, H.; MacCrann, N.; Maia, M. A. G.; Ogando, R. L. C.; Prat, J.; Rau, M. M.; Rollins, R. P.; Roodman, A.; Rozo, E.; Rykoff, E. S.; Samuroff, S.; Sánchez, C.; Sevilla-Noarbe, I.; Sheldon, E.; Troxel, M. A.; Varga, T. N.; Vielzeuf, P.; Vikram, V.; Wechsler, R. H.; Zuntz, J.; Abbott, T. M. C.; Abdalla, F. B.; Allam, S.; Annis, J.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Burke, D. L.; Kind, M. Carrasco; Carretero, J.; Crocce, M.; Cunha, C. E.; D'Andrea, C. B.; Desai, S.; Diehl, H. T.; Dietrich, J. P.; Doel, P.; Estrada, J.; Neto, A. Fausti; Fernandez, E.; Flaugher, B.; Frieman, J.; García-Bellido, J.; Gruendl, R. A.; Gutierrez, G.; Honscheid, K.; James, D. J.; Jeltema, T.; Johnson, M. W. G.; Johnson, M. D.; Kent, S.; Kirk, D.; Krause, E.; Kuehn, K.; Kuhlmann, S.; Lahav, O.; Li, T. S.; Lima, M.; March, M.; Martini, P.; Menanteau, F.; Miquel, R.; Mohr, J. J.; Neilsen, E.; Nichol, R. C.; Petravick, D.; Plazas, A. A.; Romer, A. K.; Sako, M.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Smith, M.; Smith, R. C.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Tarle, G.; Thomas, D.; Tucker, D. L.; Walker, A. R.; Wester, W.; Zhang, Y.

2018-04-01

We construct the largest curved-sky galaxy weak lensing mass map to date from the DES first-year (DES Y1) data. The map, about 10 times larger than the previous work, is constructed over a contiguous ≈1500 deg2, covering a comoving volume of ≈10 Gpc3. The effects of masking, sampling, and noise are tested using simulations. We generate weak lensing maps from two DES Y1 shear catalogues, METACALIBRATION and IM3SHAPE, with sources at redshift 0.2 < z < 1.3, and in each of four bins in this range. In the highest signal-to-noise map, the ratio between the mean signal to noise in the E-mode map and the B-mode map is ˜1.5 (˜2) when smoothed with a Gaussian filter of σG = 30 (80) arcmin. The second and third moments of the convergence κ in the maps are in agreement with simulations. We also find no significant correlation of κ with maps of potential systematic contaminants. Finally, we demonstrate two applications of the mass maps: (1) cross-correlation

Estimation des masses, des centres de gravite ainsi que des moments d'inertie de l'avion cessna citation X

NASA Astrophysics Data System (ADS)

Chahbani, Samia

The masses, centers of gravity and moments of inertia are the main parameters in the three phases of the design of the aircraft. They are of extreme importance in the studies of the stability and proper functioning of the aircraft by modeling and simulation methods. Unfortunately, these data are not always available given the confidentiality of aerospace field. A question arises naturally: How to estimate the mass, center of gravity and moments of inertia of an aircraft based on only its geometry? In this context in which this thesis is realized, the masses are estimated by Raymer`s methods. The aircraft described in procedures based on mechanical techniques engineers are used for determining the centers of gravity. The DATCOM is applied for obtaining moments of inertia. Finally, the results obtained are validated by using the flight simulator at the LARCASE corresponding to Cessna Citation X. we conclude with a representation of an analytical model that sum up the different step to follow up for estimating masses, centers of gravity and moments of inertia for any commercial aircraft.

Une nouvelle voie pour la conception des implants intervertébraux

NASA Astrophysics Data System (ADS)

Gradel, T.; Tabourot, L.; Arrieux, R.; Balland, P.

2002-12-01

L'objectif de notre travail est la conception d'une nouvelle génération d'implants intersomatiques qui s'adapte parfaitement à la géométrie des plateaux vertébraux en se déformant. Pour cela, nous avons utilisé une nouvelle démarche qui consiste à simuler entièrement le procédé de fabrication en l'occurrence l'emboutissage, Cette simulation, en concervant l'historique des sollicitations exercées sur le matériau lors de sa mise en œuvre permet de valider très précisément sa résistance mécanique en fin de cycle. Au cours de cette étude, nous avons mené en parallèle deux analyses dites “ coopératives ” : l'une fondée sur un modèle phénoménologique de type HILL et l'autre sur un modèle multi-échelles prenant en compte des phénomènes plus physiques afin d'acquérir une bonne connaissance du comportement du matériau lors de la déformation. C'est pour sa bonne résistance, sa biocompatibilité et ses propriétés radiologiques que nous avons choisi le T40 (titane pur) comme matériau.

Multiplicative Process in Turbulent Velocity Statistics: A Simplified Analysis

NASA Astrophysics Data System (ADS)

Chillà, F.; Peinke, J.; Castaing, B.

1996-04-01

A lot of models in turbulence links the energy cascade process and intermittency, the characteristic of which being the shape evolution of the probability density functions (pdf) for longitudinal velocity increments. Using recent models and experimental results, we show that the flatness factor of these pdf gives a simple and direct estimate for what is called the deepness of the cascade. We analyse in this way the published data of a Direct Numerical Simulation and show that the deepness of the cascade presents the same Reynolds number dependence as in laboratory experiments. Plusieurs modèles de turbulence relient la cascade d'énergie et l'intermittence, caractérisée par l'évolution des densités de probabilité (pdf) des incréments longitudinaux de vitesse. Nous appuyant aussi bien sur des modèles récents que sur des résultats expérimentaux, nous montrons que la Curtosis de ces pdf permet une estimation simple et directe de la profondeur de la cascade. Cela nous permet de réanalyser les résultats publiés d'une simulation numérique et de montrer que la profondeur de la cascade y évolue de la même façon que pour les expériences de laboratoire en fonction du nombre de Reynolds.

Interaction and dynamics of (alkylamide + electrolyte) deep eutectics: Dependence on alkyl chain-length, temperature, and anion identity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guchhait, Biswajit; Das, Suman; Daschakraborty, Snehasis

Here we investigate the solute-medium interaction and solute-centered dynamics in (RCONH{sub 2} + LiX) deep eutectics (DEs) via carrying out time-resolved fluorescence measurements and all-atom molecular dynamics simulations at various temperatures. Alkylamides (RCONH{sub 2}) considered are acetamide (CH{sub 3}CONH{sub 2}), propionamide (CH{sub 3}CH{sub 2}CONH{sub 2}), and butyramide (CH{sub 3}CH{sub 2}CH{sub 2}CONH{sub 2}); the electrolytes (LiX) are lithium perchlorate (LiClO{sub 4}), lithium bromide (LiBr), and lithium nitrate (LiNO{sub 3}). Differential scanning calorimetric measurements reveal glass transition temperatures (T{sub g}) of these DEs are ∼195 K and show a very weak dependence on alkyl chain-length and electrolyte identity. Time-resolved and steady statemore » fluorescence measurements with these DEs have been carried out at six-to-nine different temperatures that are ∼100–150 K above their individual T{sub g}s. Four different solute probes providing a good spread of fluorescence lifetimes have been employed in steady state measurements, revealing strong excitation wavelength dependence of probe fluorescence emission peak frequencies. Extent of this dependence, which shows sensitivity to anion identity, has been found to increase with increase of amide chain-length and decrease of probe lifetime. Time-resolved measurements reveal strong fractional power dependence of average rates for solute solvation and rotation with fraction power being relatively smaller (stronger viscosity decoupling) for DEs containing longer amide and larger (weaker decoupling) for DEs containing perchlorate anion. Representative all-atom molecular dynamics simulations of (CH{sub 3}CONH{sub 2} + LiX) DEs at different temperatures reveal strongly stretched exponential relaxation of wavevector dependent acetamide self dynamic structure factor with time constants dependent both on ion identity and temperature, providing justification for explaining the fluorescence results in terms of temporal heterogeneity and amide clustering in these multi-component melts.« less

PHOTOMETRIC SUPERNOVA CLASSIFICATION WITH MACHINE LEARNING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lochner, Michelle; Peiris, Hiranya V.; Lahav, Ofer

Automated photometric supernova classification has become an active area of research in recent years in light of current and upcoming imaging surveys such as the Dark Energy Survey (DES) and the Large Synoptic Survey Telescope, given that spectroscopic confirmation of type for all supernovae discovered will be impossible. Here, we develop a multi-faceted classification pipeline, combining existing and new approaches. Our pipeline consists of two stages: extracting descriptive features from the light curves and classification using a machine learning algorithm. Our feature extraction methods vary from model-dependent techniques, namely SALT2 fits, to more independent techniques that fit parametric models tomore » curves, to a completely model-independent wavelet approach. We cover a range of representative machine learning algorithms, including naive Bayes, k -nearest neighbors, support vector machines, artificial neural networks, and boosted decision trees (BDTs). We test the pipeline on simulated multi-band DES light curves from the Supernova Photometric Classification Challenge. Using the commonly used area under the curve (AUC) of the Receiver Operating Characteristic as a metric, we find that the SALT2 fits and the wavelet approach, with the BDTs algorithm, each achieve an AUC of 0.98, where 1 represents perfect classification. We find that a representative training set is essential for good classification, whatever the feature set or algorithm, with implications for spectroscopic follow-up. Importantly, we find that by using either the SALT2 or the wavelet feature sets with a BDT algorithm, accurate classification is possible purely from light curve data, without the need for any redshift information.« less

Discrete Event Simulation of a Suppression of Enemy Air Defenses (SEAD) Mission

DTIC Science & Technology

2008-03-01

component-based DES developed in Java® using the Simkit simulation package. Analysis of ship self air defense system selection ( Turan , 1999) is another...Institute of Technology, Wright-Patterson AFB OH, March 2003 (ADA445279 ) Turan , Bulent. A Comparative Analysis of Ship Self Air Defense (SSAD) Systems

Reducing ambulance response times using discrete event simulation.

PubMed

Wei Lam, Sean Shao; Zhang, Zhong Cheng; Oh, Hong Choon; Ng, Yih Ying; Wah, Win; Hock Ong, Marcus Eng

2014-01-01

The objectives of this study are to develop a discrete-event simulation (DES) model for the Singapore Emergency Medical Services (EMS), and to demonstrate the utility of this DES model for the evaluation of different policy alternatives to improve ambulance response times. A DES model was developed based on retrospective emergency call data over a continuous 6-month period in Singapore. The main outcome measure is the distribution of response times. The secondary outcome measure is ambulance utilization levels based on unit hour utilization (UHU) ratios. The DES model was used to evaluate different policy options in order to improve the response times, while maintaining reasonable fleet utilization. Three policy alternatives looking at the reallocation of ambulances, the addition of new ambulances, and alternative dispatch policies were evaluated. Modifications of dispatch policy combined with the reallocation of existing ambulances were able to achieve response time performance equivalent to that of adding 10 ambulances. The median (90th percentile) response time was 7.08 minutes (12.69 minutes). Overall, this combined strategy managed to narrow the gap between the ideal and existing response time distribution by 11-13%. Furthermore, the median UHU under this combined strategy was 0.324 with an interquartile range (IQR) of 0.047 versus a median utilization of 0.285 (IQR of 0.051) resulting from the introduction of additional ambulances. Response times were shown to be improved via a more effective reallocation of ambulances and dispatch policy. More importantly, the response time improvements were achieved without a reduction in the utilization levels and additional costs associated with the addition of ambulances. We demonstrated the effective use of DES as a versatile platform to model the dynamic system complexities of Singapore's national EMS systems for the evaluation of operational strategies to improve ambulance response times.

Verona Coding Definitions of Emotional Sequences (VR-CoDES): Conceptual framework and future directions.

PubMed

Piccolo, Lidia Del; Finset, Arnstein; Mellblom, Anneli V; Figueiredo-Braga, Margarida; Korsvold, Live; Zhou, Yuefang; Zimmermann, Christa; Humphris, Gerald

2017-12-01

To discuss the theoretical and empirical framework of VR-CoDES and potential future direction in research based on the coding system. The paper is based on selective review of papers relevant to the construction and application of VR-CoDES. VR-CoDES system is rooted in patient-centered and biopsychosocial model of healthcare consultations and on a functional approach to emotion theory. According to the VR-CoDES, emotional interaction is studied in terms of sequences consisting of an eliciting event, an emotional expression by the patient and the immediate response by the clinician. The rationale for the emphasis on sequences, on detailed classification of cues and concerns, and on the choices of explicit vs. non-explicit responses and providing vs. reducing room for further disclosure, as basic categories of the clinician responses, is described. Results from research on VR-CoDES may help raise awareness of emotional sequences. Future directions in applying VR-CoDES in research may include studies on predicting patient and clinician behavior within the consultation, qualitative analyses of longer sequences including several VR-CoDES triads, and studies of effects of emotional communication on health outcomes. VR-CoDES may be applied to develop interventions to promote good handling of patients' emotions in healthcare encounters. Copyright © 2017 Elsevier B.V. All rights reserved.

Modeling Anti-Air Warfare With Discrete Event Simulation and Analyzing Naval Convoy Operations

DTIC Science & Technology

2016-06-01

WARFARE WITH DISCRETE EVENT SIMULATION AND ANALYZING NAVAL CONVOY OPERATIONS by Ali E. Opcin June 2016 Thesis Advisor: Arnold H. Buss Co...REPORT DATE June 2016 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE MODELING ANTI-AIR WARFARE WITH DISCRETE EVENT...In this study, a discrete event simulation (DES) was built by modeling ships, and their sensors and weapons, to simulate convoy operations under

Numerical prediction of marine propeller noise in non-uniform inflow

NASA Astrophysics Data System (ADS)

Pan, Yu-cun; Zhang, Huai-xin

2013-03-01

A numerical study on the acoustic radiation of a propeller interacting with non-uniform inflow has been conducted. Real geometry of a marine propeller DTMB 4118 is used in the calculation, and sliding mesh technique is adopted to deal with the rotational motion of the propeller. The performance of the DES (Detached Eddy Simulation) approach at capturing the unsteady forces and moments on the propeller is compared with experiment. Far-field sound radiation is predicted by the formation 1A developed by Farassat, an integral solution of FW-H (Ffowcs Williams-Hawkings) equation in time domain. The sound pressure and directivity patterns of the propeller operating in two specific velocity distributions are discussed.

Standardisation for C2-Simulation Interoperation

DTIC Science & Technology

2015-11-01

la continuité du MSG-048 a permis, grâce notamment à la contribution de la communauté opérationnelle, de consolider le besoin et d’approfondir un...demandes de documents STO, RTO ou AGARD doivent comporter la dénomination « STO », « RTO » ou « AGARD » selon le cas, suivi du numéro de série. Des ...disponibilité des rapports de la STO au fur et à mesure de leur publication, vous pouvez consulter notre site Web

Foreign Exchange Value-at-Risk with Multiple Currency Exposure: A Multivariate and Copula Generalized Autoregressive Conditional Heteroskedasticity Approach

DTIC Science & Technology

2014-11-01

du taux de change, et les responsables de la gestion interne se voient donc pressés de trouver des ... mesurer les effets négatifs que peuvent avoir les fluctuations mo- nétaires sur le budget et la planification du MDN, il faut connaître le poids des ...qualités comparables et qu’ils permettent d’effectuer une meilleure évaluation du risque qu’avec la méthode courante. On obtient désormais des estimations de

Holonic Approach for Control and Coordination of Distributed Sensors

DTIC Science & Technology

2008-08-01

Kuokka, D. R., Weber, J. C., Tenenbaum, J. M., Gruber, T . R., and Olsen, G . R. (1993), SHADE: Technology for Knowledge-Based Collaborative 70 DRDC...H o l o n i c a p p ro a ch fo r c o n t ro l a n d coordination of distributed sensors A. Benaskeur H. Irandoust DRDC Valcartier Defence R&D...contrôle de la gestion des capteurs, et en par- ticulier les processus de planification des tâches et l’allocation des capteurs, sont discutés en

Developpement d'un montage simulant l'erosion par la pluie pour l'evaluation des revetements glaciophobes dans le domaine aerospatial

NASA Astrophysics Data System (ADS)

Tremblay, Sarah-Eve

Ce memoire presente le developpement d’un montage simulant l’erosion par la pluie afin d’effectuer l’evaluation de differents revetements glaciophobes dans le domaine aerospatial. Bien que plusieurs revetements presentent une bonne efficacite a reduire l’adherence et/ou l’accumulation de glace, ils ne repondent pas necessairement aux normes de resistance a l’erosion simulee par les gouttes de pluie les frappant a grande vitesse. Il n’existe qu’une installation en Amerique du Nord offrant un service d’essai qui evalue la resistance a l’erosion par la pluie suivant les normes aerospatiales. Etant l’unique institution pouvant faire la certification de peintures utilisees sur les avions en ce qui a trait a l’erosion par la pluie, ce service est donc difficile d’acces et couteux. Le laboratoire international des materiaux antigivre (LIMA) a developpe un essai plus rapide et moins couteux, facilitant ainsi le developpement de revetements glaciophobes devant resister a l’erosion par la pluie. Dans cette etude, le developpement du montage d’erosion par la pluie effectue au laboratoire des materiaux antigivre (LIMA) est presente. En particulier, des essais sur quatre (4) revetements dont la resistance a l’erosion est connue, et sur trois revetements industriels, ont ete effectues afin d’ajuster les differents parametres du montage comme la pression et la temperature de l’eau ainsi que la robustesse du montage. Ensuite, des essais de sensibilite et de reproductibilite des resultats ont egalement ete effectues pour fin de validation du montage et du protocole experimental. Pour ce faire, le montage de type jet d’eau developpe consiste principalement en une pompe a haute pression qui projette un jet d’eau continu passant par les orifices d’un disque tournant. Cette operation permet de generer une goutte de pluie simulee qui est projetee sur un echantillon de revetement statique. L’essai est base sur la norme standard ASTM (Liquid Impingement Erosion Testing, G73-82). La resistance a l’erosion du materiau est determinee a l’aide du nombre d’impacts subi par l’echantillon obtenu avant la production de dommages visibles. Donc, pour determiner le niveau d’erosion, quatre sites d’impacts doivent etre erodes sur cinq sur le meme rang pour le meme nombre d’impact. L’analyse des quatre revetements de resistance a l’erosion connus a ete completee par l’examen microscopique de chaque site d’impact et d’une photo. Le choix des quatre revetements de resistance a l’erosion connue, allant du plus resistant au moins resistant, a permis de verifier que le montage etait assez sensible pour evaluer les revetements souvent utilises dans le domaine aerospatial. De plus, l’evaluation des trois revetements industriels a permis, pour sa part, de confirmer les resultats obtenus precedemment. Finalement, pour evaluer la sensibilite et la reproductibilite des resultats, de deux a six repetitions pour chaque revetement a ete effectuees donnant des taux d’erosion allant de 100 a 100 000 impacts. L’intervalle des ecarts-types varie de ± 0% a ± 47% pour une moyenne de ± 17%. Le critere d’echec a ete determine a l’aide du nombre d’impacts avant l’apparition de dommage visible ainsi que de la repetabilite des resultats.

Developpement d'une methode calorimetrique de mesure des pertes ac pour des rubans supraconducteurs a haute temperature critique

NASA Astrophysics Data System (ADS)

Dolez, Patricia

Le travail de recherche effectue dans le cadre de ce projet de doctorat a permis la mise au point d'une methode de mesure des pertes ac destinee a l'etude des supraconducteurs a haute temperature critique. Pour le choix des principes de cette methode, nous nous sommes inspires de travaux anterieurs realises sur les supraconducteurs conventionnels, afin de proposer une alternative a la technique electrique, presentant lors du debut de cette these des problemes lies a la variation du resultat des mesures selon la position des contacts de tension sur la surface de l'echantillon, et de pouvoir mesurer les pertes ac dans des conditions simulant la realite des futures applications industrielles des rubans supraconducteurs: en particulier, cette methode utilise la technique calorimetrique, associee a une calibration simultanee et in situ. La validite de la methode a ete verifiee de maniere theorique et experimentale: d'une part, des mesures ont ete realisees sur des echantillons de Bi-2223 recouverts d'argent ou d'alliage d'argent-or et comparees avec les predictions theoriques donnees par Norris, nous indiquant la nature majoritairement hysteretique des pertes ac dans nos echantillons; d'autre part, une mesure electrique a ete realisee in situ dont les resultats correspondent parfaitement a ceux donnes par notre methode calorimetrique. Par ailleurs, nous avons compare la dependance en courant et en frequence des pertes ac d'un echantillon avant et apres qu'il ait ete endommage. Ces mesures semblent indiquer une relation entre la valeur du coefficient de la loi de puissance modelisant la dependance des pertes avec le courant, et les inhomogeneites longitudinales du courant critique induites par l'endommagement. De plus, la variation en frequence montre qu'au niveau des grosses fractures transverses creees par l'endommagement dans le coeur supraconducteur, le courant se partage localement de maniere a peu pres equivalente entre les quelques grains de matiere supraconductrice qui restent fixes a l'interface coeur-enveloppe, et le revetement en alliage d'argent. L'interet d'une methode calorimetrique par rapport a la technique electrique, plus rapide, plus sensible et maintenant fiable, reside dans la possibilite de realiser des mesures de pertes ac dans des environnements complexes, reproduisant la situation presente par exemple dans un cable de transport d'energie ou dans un transformateur. En particulier, la superposition d'un courant dc en plus du courant ac habituel nous a permis d'observer experimentalement, pour la premiere fois a notre connaissance, un comportement particulier des pertes ac en fonction de la valeur du courant dc decrit theoriquement par LeBlanc. Nous avons pu en deduire la presence d'un courant d'ecrantage Meissner de 16 A, ce qui nous permet de determiner les conditions dans lesquelles une reduction du niveau de pertes ac pourrait etre obtenue par application d'un courant dc, phenomene denomme "vallee de Clem".

Dark Energy Survey Year 1 results: the impact of galaxy neighbours on weak lensing cosmology with IM3SHAPE

NASA Astrophysics Data System (ADS)

Samuroff, S.; Bridle, S. L.; Zuntz, J.; Troxel, M. A.; Gruen, D.; Rollins, R. P.; Bernstein, G. M.; Eifler, T. F.; Huff, E. M.; Kacprzak, T.; Krause, E.; MacCrann, N.; Abdalla, F. B.; Allam, S.; Annis, J.; Bechtol, K.; Benoit-Lévy, A.; Bertin, E.; Brooks, D.; Buckley-Geer, E.; Carnero Rosell, A.; Carrasco Kind, M.; Carretero, J.; Crocce, M.; D'Andrea, C. B.; da Costa, L. N.; Davis, C.; Desai, S.; Doel, P.; Fausti Neto, A.; Flaugher, B.; Fosalba, P.; Frieman, J.; García-Bellido, J.; Gerdes, D. W.; Gruendl, R. A.; Gschwend, J.; Gutierrez, G.; Honscheid, K.; James, D. J.; Jarvis, M.; Jeltema, T.; Kirk, D.; Kuehn, K.; Kuhlmann, S.; Li, T. S.; Lima, M.; Maia, M. A. G.; March, M.; Marshall, J. L.; Martini, P.; Melchior, P.; Menanteau, F.; Miquel, R.; Nord, B.; Ogando, R. L. C.; Plazas, A. A.; Roodman, A.; Sanchez, E.; Scarpine, V.; Schindler, R.; Schubnell, M.; Sevilla-Noarbe, I.; Sheldon, E.; Smith, M.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Tarle, G.; Thomas, D.; Tucker, D. L.; DES Collaboration

2018-04-01

We use a suite of simulated images based on Year 1 of the Dark Energy Survey to explore the impact of galaxy neighbours on shape measurement and shear cosmology. The HOOPOE image simulations include realistic blending, galaxy positions, and spatial variations in depth and point spread function properties. Using the IM3SHAPE maximum-likelihood shape measurement code, we identify four mechanisms by which neighbours can have a non-negligible influence on shear estimation. These effects, if ignored, would contribute a net multiplicative bias of m ˜ 0.03-0.09 in the Year One of the Dark Energy Survey (DES Y1) IM3SHAPE catalogue, though the precise impact will be dependent on both the measurement code and the selection cuts applied. This can be reduced to percentage level or less by removing objects with close neighbours, at a cost to the effective number density of galaxies neff of 30 per cent. We use the cosmological inference pipeline of DES Y1 to explore the cosmological implications of neighbour bias and show that omitting blending from the calibration simulation for DES Y1 would bias the inferred clustering amplitude S8 ≡ σ8(Ωm/0.3)0.5 by 2σ towards low values. Finally, we use the HOOPOE simulations to test the effect of neighbour-induced spatial correlations in the multiplicative bias. We find the impact on the recovered S8 of ignoring such correlations to be subdominant to statistical error at the current level of precision.

Dark Energy Survey Year 1 results: the impact of galaxy neighbours on weak lensing cosmology with IM3SHAPE

DOE PAGES

Samuroff, S.

2017-12-26

We use a suite of simulated images based on Year 1 of the Dark Energy Survey to explore the impact of galaxy neighbours on shape measurement and shear cosmology. The hoopoe image simulations include realistic blending, galaxy positions, and spatial variations in depth and PSF properties. Using the im3shape maximum-likelihood shape measurement code, we identify four mechanisms by which neighbours can have a non-negligible influence on shear estimation. These effects, if ignored, would contribute a net multiplicative bias ofmore » $$m \\sim 0.03 - 0.09$$ in the DES Y1 im3shape catalogue, though the precise impact will be dependent on both the measurement code and the selection cuts applied. This can be reduced to percentage level or less by removing objects with close neighbours, at a cost to the effective number density of galaxies $$n_\\mathrm{eff}$$ of 30%. We use the cosmological inference pipeline of DES Y1 to explore the cosmological implications of neighbour bias and show that omitting blending from the calibration simulation for DES Y1 would bias the inferred clustering amplitude $$S_8\\equiv \\sigma_8 (\\Omega _\\mathrm{m} /0.3)^{0.5}$$ by $$2 \\sigma$$ towards low values. Lastly, we use the hoopoe simulations to test the effect of neighbour-induced spatial correlations in the multiplicative bias. We find the impact on the recovered $$S_8$$ of ignoring such correlations to be subdominant to statistical error at the current level of precision.« less

Dark Energy Survey Year 1 results: the impact of galaxy neighbours on weak lensing cosmology with IM3SHAPE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Samuroff, S.

We use a suite of simulated images based on Year 1 of the Dark Energy Survey to explore the impact of galaxy neighbours on shape measurement and shear cosmology. The hoopoe image simulations include realistic blending, galaxy positions, and spatial variations in depth and PSF properties. Using the im3shape maximum-likelihood shape measurement code, we identify four mechanisms by which neighbours can have a non-negligible influence on shear estimation. These effects, if ignored, would contribute a net multiplicative bias ofmore » $$m \\sim 0.03 - 0.09$$ in the DES Y1 im3shape catalogue, though the precise impact will be dependent on both the measurement code and the selection cuts applied. This can be reduced to percentage level or less by removing objects with close neighbours, at a cost to the effective number density of galaxies $$n_\\mathrm{eff}$$ of 30%. We use the cosmological inference pipeline of DES Y1 to explore the cosmological implications of neighbour bias and show that omitting blending from the calibration simulation for DES Y1 would bias the inferred clustering amplitude $$S_8\\equiv \\sigma_8 (\\Omega _\\mathrm{m} /0.3)^{0.5}$$ by $$2 \\sigma$$ towards low values. Lastly, we use the hoopoe simulations to test the effect of neighbour-induced spatial correlations in the multiplicative bias. We find the impact on the recovered $$S_8$$ of ignoring such correlations to be subdominant to statistical error at the current level of precision.« less

Some Recent Developments in Turbulence Closure Modeling

NASA Astrophysics Data System (ADS)

Durbin, Paul A.

2018-01-01

Turbulence closure models are central to a good deal of applied computational fluid dynamical analysis. Closure modeling endures as a productive area of research. This review covers recent developments in elliptic relaxation and elliptic blending models, unified rotation and curvature corrections, transition prediction, hybrid simulation, and data-driven methods. The focus is on closure models in which transport equations are solved for scalar variables, such as the turbulent kinetic energy, a timescale, or a measure of anisotropy. Algebraic constitutive representations are reviewed for their role in relating scalar closures to the Reynolds stress tensor. Seamless and nonzonal methods, which invoke a single closure model, are reviewed, especially detached eddy simulation (DES) and adaptive DES. Other topics surveyed include data-driven modeling and intermittency and laminar fluctuation models for transition prediction. The review concludes with an outlook.

Discrete Event Simulation for Decision Modeling in Health Care: Lessons from Abdominal Aortic Aneurysm Screening

PubMed Central

Jones, Edmund; Masconi, Katya L.; Sweeting, Michael J.; Thompson, Simon G.; Powell, Janet T.

2018-01-01

Markov models are often used to evaluate the cost-effectiveness of new healthcare interventions but they are sometimes not flexible enough to allow accurate modeling or investigation of alternative scenarios and policies. A Markov model previously demonstrated that a one-off invitation to screening for abdominal aortic aneurysm (AAA) for men aged 65 y in the UK and subsequent follow-up of identified AAAs was likely to be highly cost-effective at thresholds commonly adopted in the UK (£20,000 to £30,000 per quality adjusted life-year). However, new evidence has emerged and the decision problem has evolved to include exploration of the circumstances under which AAA screening may be cost-effective, which the Markov model is not easily able to address. A new model to handle this more complex decision problem was needed, and the case of AAA screening thus provides an illustration of the relative merits of Markov models and discrete event simulation (DES) models. An individual-level DES model was built using the R programming language to reflect possible events and pathways of individuals invited to screening v. those not invited. The model was validated against key events and cost-effectiveness, as observed in a large, randomized trial. Different screening protocol scenarios were investigated to demonstrate the flexibility of the DES. The case of AAA screening highlights the benefits of DES, particularly in the context of screening studies.

Simulation 󈨔 Symposium.

DTIC Science & Technology

1980-11-21

defensive , and both the question and the answer seemed to generate supporting reactions from the audience. Discrete Event Simulation The session on...R. Toscano / A. Maceri / F. Maceri (Italy) Analyse numerique de quelques problemes de contact en theorie des membranes 3:40 - 4:00 p.m. COFFEE BREAK...Switzerland Stockage de chaleur faible profondeur : Simulation par elements finis 3:40 - 4:00 p.m. A. Rizk Abu El-Wafa / M. Tawfik / M.S. Mansour (Egypt) Digital

Evaluation of the Navys Sea/Shore Flow Policy

DTIC Science & Technology

2016-06-01

Std. Z39.18 i Abstract CNA developed an independent Discrete -Event Simulation model to evaluate and assess the effect of...a more steady manning level, but the variability remains, even if the system is optimized. In building a Discrete -Event Simulation model, we...steady-state model. In FY 2014, CNA developed a Discrete -Event Simulation model to evaluate the impact of sea/shore flow policy (the DES-SSF model

Synthese de champs sonores adaptative

NASA Astrophysics Data System (ADS)

Gauthier, Philippe-Aubert

La reproduction de champs acoustiques est une approche physique au probleme technologique de la spatialisation sonore. Cette these concerne l'aspect physique de la reproduction de champs acoustiques. L'objectif principal est l'amelioration de la reproduction de champs acoustiques par "synthese de champs acoustiques" ("Wave Field Synthesis", WFS), une approche connue, basee sur des hypotheses de champ libre, a l'aide du controle actif par l'ajout de capteurs de l'erreur de reproduction et d'une boucle fermee. Un premier chapitre technique (chapitre 4) expose les resultats d'appreciation objective de la WFS par simulations et mesures experimentales. L'effet indesirable de la salle de reproduction sur les qualites objectives de la WFS fut illustre. Une premiere question de recherche fut ensuite abordee (chapitre 5), a savoir s'il est possible de reproduire des champs progressifs en salle dans un paradigme physique de controle actif: cette possibilite fut prouvee. L'approche technique privilegiee, "synthese de champs adaptative" ("Adaptive Wave Field Synthesis" [AWFS]), fut definie, puis simulee (chapitre 6). Cette approche d'AWFS comporte une originalite en controle actif et en reproduction de champs acoustiques: la fonction cout quadratique representant la minimisation des erreurs de reproduction inclut une regularisation de Tikhonov avec solution a priori qui vient de la WFS. L'etude de l'AWFS a l'aide de la decomposition en valeurs singulieres (chapitre 7) a permis de comprendre les mecanismes propres a l'AWFS. C'est la deuxieme principale originalite de la these. L'algorithme FXLMS (LMS et reference filtree) est modifie pour l'AWFS (chapitre 8). Le decouplage du systeme par decomposition en valeurs singulieres est illustre dans le domaine du traitement de signal et l'AWFS basee sur le controle independant des modes de rayonnement est simulee (chapitre 8). Ce qui constitue la troisieme originalite principale de cette these. Ces simulations du traitement de signal montrent l'efficacite des algorithmes et la capacite de l'AWFS a attenuer les erreurs attribuables a des reflexions acoustiques. Le neuvieme chapitre presente des resultats experimentaux d'AWFS. L'objectif etait de valider la methode et d'evaluer les performances de l'AWFS. Un autre algorithme prometteur est aussi teste. Les resultats demontrent la bonne marche de l'AWFS et des algorithmes testes. Autant dans le cas de la reproduction de champs harmoniques que dans le cas de la reproduction de champs a large bande, l'AWFS reduit l'erreur de reproduction de la WFS et les effets indesirables causes par les lieux de reproduction.

DES Prediction of Cavitation Erosion and Its Validation for a Ship Scale Propeller

NASA Astrophysics Data System (ADS)

Ponkratov, Dmitriy, Dr

2015-12-01

Lloyd's Register Technical Investigation Department (LR TID) have developed numerical functions for the prediction of cavitation erosion aggressiveness within Computational Fluid Dynamics (CFD) simulations. These functions were previously validated for a model scale hydrofoil and ship scale rudder [1]. For the current study the functions were applied to a cargo ship's full scale propeller, on which the severe cavitation erosion was reported. The performed Detach Eddy Simulation (DES) required a fine computational mesh (approximately 22 million cells), together with a very small time step (2.0E-4 s). As the cavitation for this type of vessel is primarily caused by a highly non-uniform wake, the hull was also included in the simulation. The applied method under predicted the cavitation extent and did not fully resolve the tip vortex; however, the areas of cavitation collapse were captured successfully. Consequently, the developed functions showed a very good prediction of erosion areas, as confirmed by comparison with underwater propeller inspection results.

Investigation of Transonic Wake Dynamics for Mechanically Deployable Entry Systems

NASA Technical Reports Server (NTRS)

Stern, Eric; Barnhardt, Michael; Venkatapathy, Ethiraj; Candler, Graham; Prabhu, Dinesh

2012-01-01

A numerical investigation of transonic flow around a mechanically deployable entry system being considered for a robotic mission to Venus has been performed, and preliminary results are reported. The flow around a conceptual representation of the vehicle geometry was simulated at discrete points along a ballistic trajectory using Detached Eddy Simulation (DES). The trajectory points selected span the low supersonic to transonic regimes with freestream Mach numbers from 1:5 to 0:8, and freestream Reynolds numbers (based on diameter) between 2:09 x 10(exp 6) and 2:93 x 10(exp 6). Additionally, the Mach 0:8 case was simulated at angles of attack between 0 and 5 . Static aerodynamic coefficients obtained from the data show qualitative agreement with data from 70deg sphere-cone wind tunnel tests performed for the Viking program. Finally, the effect of choices of models and numerical algorithms is addressed by comparing the DES results to those using a Reynolds Averaged Navier-Stokes (RANS) model, as well as to results using a more dissipative numerical scheme.

Préface

NASA Astrophysics Data System (ADS)

Schober, Helmut; Fischer, Henry; Leclercq-Hugeux, Françoise

2003-09-01

L'École Thématique “Structure et Dynamique des Systèmes Désordonnés” [1] s'inscrit dans le cadre des écoles organisées sous l'impulsion de la Société Française de la Neutronique (SFN). Elle s'est deroulée en mai 2002 sur la Presqu'île de Giens (Var) en première partie des 11émes Journées de la Diffusion Neutronique. L'Édition de ces cours constitue ainsi le cinquième ouvrage introduisant les techniques neutroniques et leurs apports à differentes thématiques [2]. Le désordre est un facteur déterminant pour pratiquement toutes les propriétés des matériaux. Il est inhérent dans les matériaux amorphes ou liquides, mais il détermine également les propriétés mécaniques et électroniques d'autres composés d'importance technologique comme les matériaux métalliques, dont l'aspect “désordonné” est moins évident. Le désordre enfin joue un rôle essentiel dans tout ce que touche à la vie. En fait, il est difficile d'imaginer des systèmes, à part quelques exceptions rares comme l'hélium ou le silicium de haute pureté, où il n'y ait pas de désordre. En dehors de cet aspect pratique, la description scientifique du désordre atomique pose toujours des problèmes fondamentaux faute de concepts pertinents. Une des tâches importantes du scientifique ou de l'ingenieur est de préciser quel genre de désordre existe à une échelle d'espace et de temps donnée. Un materiau peut très bien être homogène à l'échelle atomique et présenter des défauts ou des hétrogéneité visibles à l'œil et inversement. De même, un système désordonné à un instant donné, peut apparaître ordonné si on moyenne dans le temps. Les techniques de diffusion des neutrons sont idéales pour aborder ces questions. Les neutrons sondent directement les noyaux et ont à la fois des longueurs d'ondes proches des distances inter atomiques et des énergies avoisinant celles des excitations élémentaires de la matière condensée. Ils permettent ainsi une observation directe et non-destructive des positions et des mouvements atomiques. La gamme des distances et des temps sondés par les neutrons autorisent aussi bien de suivre le mouvement des atomes à l'échelle inter atomique que l'évolution d'une structure soit mésoscopique soit macroscopique sur des temps de moins d'une picoseconde à plusieurs heures. La gamme des techniques de diffusion utilisées pour couvrir un tel champ d'application est naturellement très large : différents types de diffractomètres permettent des études de structure atomique trés pointue et résolue dans le temps. Les spectromètres nous donnent accès à la dynamique d'une dizaine de femto- à plusieurs nanosecondes. La diffusion aux petits angles, la reflectomètrie et finalement la tomographie nous permettent de regarder la structure et la dynamique d'objets plus grands. Il était illusoire de prétendre couvrir la totalité des systèmes désordonnés et l'ensemble des techniques de diffusion neutronique pertinentes au cours d'une école de 3 jours. Nous avons donc été amené à nous concentrer sur les liquides, les verres, les cristaux plastiques et les polymères. Ce choix s'est imposé par le souhait d'introduire les concepts de base, en acceptant de sacrifier certains domaines d'applications. Il va de soi que l'étude approfondie de systèmes mettant en jeu plusieurs échelles de distance (structure moléculaire, portée des corrélations entre les molécules) et de temps (relaxations caractéristiques des divers phenomènes dynamiques selon leur extension spatiale) implique une pluralité de techniques expérimentales, complémentaires des différentes techniques neutroniques disponibles. Un des objectifs de cette école etait donc de préciser les domaines de pertinence des différentes techniques neutroniques disponibles en en situant la complémentarité avec d'autres approches instrumentales (diffraction des rayons X, EXAFS, RMN, etc.). Enfin la confrontation avec les résultats obtenus par simulation et modélisation numérique est essentielle à la compréhension des processus élémentaires dans ces systèmes complexes. En première partie de cet ouvrage, on trouvera une description géntrale des systèmes désordonnés et une introduction aux techniques de diffusion de neutrons. Pour la partie concernant la structure, une revue des techniques de diffraction est suivie par des applications à des systèmes de complexité croissante (liquides métalliques simples, alliages liquides, semiconducteurs fondus, solutions aqueuses, verres d'oxydes). L'apport des méthodes de variation de longueur de diffusion (substitution isotopique pour les mesures aux neutrons, diffusion anomale des rayons X ou combinaison de ces deux techniques) permet la détermination des facteurs de structures partiels. Pour la dynamique, on a privilégié une approche introduisant progressivement le désordre en passant des solides aux liquides. Le concept de diffusion puis les particularités dynamiques des verres sont ensuite présentés et illustrés par des exemples concrets. Enfin la dernière partie est consacrée à la simulation numérique des propriétés dynamiques des verres et des liquides et à la modélisation de la structure par méthode de Monte Carlo inverse (RMC) à partir de l'ensemble des données expérimentales existant pour un système donné. La communauté française a joué un rôle important dans le développement des techniques neutroniques dédites à l'étude des systèmes désordonnés et y a acquis une competence reconnue. Nous avons essayé, dans cet ouvrage, de privilégier les aspects pédagogiques des cours, pour les rendre accessibles aux scientifiques francophones non spécialistes en diffusion des neutrons. Nous saluons ici l'effort de rédaction, en langue française, des différents intervenants et souhaitons que cet ouvrage puisse participer à la formation et au renouvellement de la communauté neutronique française. Helmut Schober et Henry Fischer (Editeurs scientifiques) Françoise Leclercq-Hugeux (Présidente de la SFN)

Dark Energy Survey Year 1 Results: Curved-Sky Weak Lensing Mass Map

DOE PAGES

Chang, C.; Sheldon, E.; Pujol, A.; ...

2018-01-04

We construct the largest curved-sky galaxy weak lensing mass map to date from the DES firstyear (DES Y1) data. The map, about 10 times larger than previous work, is constructed over a contiguous ≈1;500 deg 2, covering a comoving volume of ≈10 Gpc 3. The effects of masking, sampling, and noise are tested using simulations. We generate weak lensing maps from two DES Y1 shear catalogs, METACALIBRATION and IM3SHAPE, with sources at redshift 0:2 < z < 1:3; and in each of four bins in this range. In the highest signal-to-noise map, the ratio between the mean signal-to-noise in themore » E-mode and the B-mode map is ~1.5 (~2) when smoothed with a Gaussian filter of sG =30 (80) arcminutes. The second and third moments of the convergence k in the maps are in agreement with simulations. We also find no significant correlation of k with maps of potential systematic contaminants. Finally, we demonstrate two applications of the mass maps: (1) cross-correlation with different foreground tracers of mass and (2) exploration of the largest peaks and voids in the maps.« less

Dark Energy Survey Year 1 Results: Curved-Sky Weak Lensing Mass Map

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, C.; Sheldon, E.; Pujol, A.

We construct the largest curved-sky galaxy weak lensing mass map to date from the DES firstyear (DES Y1) data. The map, about 10 times larger than previous work, is constructed over a contiguous ≈1;500 deg 2, covering a comoving volume of ≈10 Gpc 3. The effects of masking, sampling, and noise are tested using simulations. We generate weak lensing maps from two DES Y1 shear catalogs, METACALIBRATION and IM3SHAPE, with sources at redshift 0:2 < z < 1:3; and in each of four bins in this range. In the highest signal-to-noise map, the ratio between the mean signal-to-noise in themore » E-mode and the B-mode map is ~1.5 (~2) when smoothed with a Gaussian filter of sG =30 (80) arcminutes. The second and third moments of the convergence k in the maps are in agreement with simulations. We also find no significant correlation of k with maps of potential systematic contaminants. Finally, we demonstrate two applications of the mass maps: (1) cross-correlation with different foreground tracers of mass and (2) exploration of the largest peaks and voids in the maps.« less

Algorithmes de couplage RANS et ecoulement potentiel

NASA Astrophysics Data System (ADS)

Gallay, Sylvain

Dans le processus de developpement d'avion, la solution retenue doit satisfaire de nombreux criteres dans de nombreux domaines, comme par exemple le domaine de la structure, de l'aerodynamique, de la stabilite et controle, de la performance ou encore de la securite, tout en respectant des echeanciers precis et minimisant les couts. Les geometries candidates sont nombreuses dans les premieres etapes de definition du produit et de design preliminaire, et des environnements d'optimisations multidisciplinaires sont developpes par les differentes industries aeronautiques. Differentes methodes impliquant differents niveaux de modelisations sont necessaires pour les differentes phases de developpement du projet. Lors des phases de definition et de design preliminaires, des methodes rapides sont necessaires afin d'etudier les candidats efficacement. Le developpement de methodes ameliorant la precision des methodes existantes tout en gardant un cout de calcul faible permet d'obtenir un niveau de fidelite plus eleve dans les premieres phases de developpement du projet et ainsi grandement diminuer les risques associes. Dans le domaine de l'aerodynamisme, les developpements des algorithmes de couplage visqueux/non visqueux permettent d'ameliorer les methodes de calcul lineaires non visqueuses en methodes non lineaires prenant en compte les effets visqueux. Ces methodes permettent ainsi de caracteriser l'ecoulement visqueux sur les configurations et predire entre autre les mecanismes de decrochage ou encore la position des ondes de chocs sur les surfaces portantes. Cette these se focalise sur le couplage entre une methode d'ecoulement potentiel tridimensionnelle et des donnees de section bidimensionnelles visqueuses. Les methodes existantes sont implementees et leurs limites identifiees. Une methode originale est ensuite developpee et validee. Les resultats sur une aile elliptique demontrent la capacite de l'algorithme a de grands angles d'attaques et dans la region post-decrochage. L'algorithme de couplage a ete compare a des donnees de plus haute fidelite sur des configurations issues de la litterature. Un modele de fuselage base sur des relations empiriques et des simulations RANS a ete teste et valide. Les coefficients de portance, de trainee et de moment de tangage ainsi que les coefficients de pression extraits le long de l'envergure ont montre un bon accord avec les donnees de soufflerie et les modeles RANS pour des configurations transsoniques. Une configuration a geometrie hypersustentatoire a permis d'etudier la modelisation des surfaces hypersustentees de la methode d'ecoulement potentiel, demontrant que la cambrure peut etre prise en compte uniquement dans les donnees visqueuses.

Adaptability in Coalition Teamwork (Facultes d’adaptation au travail d’equipe en coalition)

DTIC Science & Technology

2008-04-01

principaux résultats des 30 communications théoriques et de recherche ont été les suivants : • Les outils de formation (jeux, simulations) fonctionnent...militaires ; • Le retour d’information sur le moral et les performances des équipes en opérations est un instrument qui est particulièrement apprécié...during operations is an instrument that is highly valued by commanders in the field; and • Differences in language proficiency in English confound

Proceedings of the European ISTVS Conference (6th) , OVK Symposium (4th), On ’Off Road Vehicles in Theory and Practice’ , Held at Vienna, Austria on 28-30 September 1994 in Vienna, Austria. Volume 1.

DTIC Science & Technology

1994-09-30

The Commander-in-Chief of the British troops, General Sir Peter de la Billiere, reported that each vehicle of the Tenth Transport Regiment covered 400...Simulation des Reifenprofileinflusses fuir die Gelaindebeweglichkeit von Fahrzeugen C. W. FERVERS IKK-University of German Armed Forces Hamburg, Germany...of the Process) 731 Experimentelle und theoretische Analyse kohaisiven Erdreichs beim Verschiebevorgang (Optimierung des Vorganges) A. JARZEBOWSKI, J

Two-Color Nonlinear Spectroscopy for the Rapid Acquisition of Coherent Dynamics.

PubMed

Senlik, S Seckin; Policht, Veronica R; Ogilvie, Jennifer P

2015-07-02

There has been considerable recent interest in the observation of coherent dynamics in photosynthetic systems by 2D electronic spectroscopy (2DES). In particular, coherences that persist during the "waiting time" in a 2DES experiment have been attributed to electronic, vibrational, and vibronic origins in various systems. The typical method for characterizing these coherent dynamics requires the acquisition of 2DES spectra as a function of waiting time, essentially a 3DES measurement. Such experiments require lengthy data acquisition times that degrade the signal-to-noise of the recorded coherent dynamics. We present a rapid and high signal-to-noise pulse-shaping-based approach for the characterization of coherent dynamics. Using chlorophyll a, we demonstrate that this method retains much of the information content of a 3DES measurement and provides insight into the physical origin of the coherent dynamics, distinguishing between ground and excited state coherences. It also enables high resolution determination of ground and excited state frequencies.

Pandoraea sp. B-6 assists the deep eutectic solvent pretreatment of rice straw via promoting lignin depolymerization.

PubMed

Liu, Dan; Yan, Xu; Zhuo, Shengnan; Si, Mengying; Liu, Mingren; Wang, Sheng; Ren, Lili; Chai, Liyuan; Shi, Yan

2018-06-01

Lignin depolymerization is a challenging process in biorefinery due to the recalcitrant and complex structure of lignin. This challenge was herein addressed via elaborating a new strategy of combining the bacterial strain Pandoraea sp. B-6 (hereafter B-6) with a deep eutectic solvent (DES) to pretreat rice straw (RS). In this approach, DES effectively depolymerized lignin yet easily caused sugar loss under severe conditions. B-6 not only overcame the obstacle of lignin droplets, but also significantly improved enzymatic digestibility. After B-6 assisted DES pretreatment, the reducing sugar yield increases by 0.3-1.5 times over DES pretreatment and 0.9-3.1 times over the untreated RS. Furthermore, a "cornhusking" mechanism explaining the improvement of the enzymatic digestibility by B-6 was suggested based on physicochemical characterizations of the untreated and pretreated RS. The findings provided a comprehensive perspective to establish a DES-microbial process for lignocellulose pretreatment. Copyright © 2018 Elsevier Ltd. All rights reserved.

Patient flow improvement for an ophthalmic specialist outpatient clinic with aid of discrete event simulation and design of experiment.

PubMed

Pan, Chong; Zhang, Dali; Kon, Audrey Wan Mei; Wai, Charity Sue Lea; Ang, Woo Boon

2015-06-01

Continuous improvement in process efficiency for specialist outpatient clinic (SOC) systems is increasingly being demanded due to the growth of the patient population in Singapore. In this paper, we propose a discrete event simulation (DES) model to represent the patient and information flow in an ophthalmic SOC system in the Singapore National Eye Centre (SNEC). Different improvement strategies to reduce the turnaround time for patients in the SOC were proposed and evaluated with the aid of the DES model and the Design of Experiment (DOE). Two strategies for better patient appointment scheduling and one strategy for dilation-free examination are estimated to have a significant impact on turnaround time for patients. One of the improvement strategies has been implemented in the actual SOC system in the SNEC with promising improvement reported.

Evaluation of the Navys Sea/Shore Flow Policy

DTIC Science & Technology

2016-06-01

CNA developed an independent Discrete -Event Simulation model to evaluate and assess the effect of alternative sea/shore flow policies. In this study...remains, even if the system is optimized. In building a Discrete -Event Simulation model, we discovered key factors that should be included in the... Discrete -Event Simulation model to evaluate the impact of sea/shore flow policy (the DES-SSF model) and compared the results with the SSFM for one

Qualification of safety-related electrical equipment in France. Methods, approach and test facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Raimondo, E.; Capman, J.L.; Herovard, M.

1985-05-01

Requirements for qualification of electrical equipment used in French-built nuclear power plants are stated in a national code, the RCC-E, or Regles de Construction et de Conception des Materiels Electriques. Under the RCC-E, safety related equipment is assigned to one of three different categories, according to location in the plant and anticipated normal, accident and post-accident behavior. Qualification tests differ for each category and procedures range in scope from the standard seismic test to the highly stringent VISA program, which specifies a predetermined sequence of aging, radiation, seismic and simulated accident testing. A network of official French test facilities wasmore » developed specifically to meet RCC-E requirements.« less

Model-Based Economic Evaluation of Treatments for Depression: A Systematic Literature Review.

PubMed

Kolovos, Spyros; Bosmans, Judith E; Riper, Heleen; Chevreul, Karine; Coupé, Veerle M H; van Tulder, Maurits W

2017-09-01

An increasing number of model-based studies that evaluate the cost effectiveness of treatments for depression are being published. These studies have different characteristics and use different simulation methods. We aimed to systematically review model-based studies evaluating the cost effectiveness of treatments for depression and examine which modelling technique is most appropriate for simulating the natural course of depression. The literature search was conducted in the databases PubMed, EMBASE and PsycInfo between 1 January 2002 and 1 October 2016. Studies were eligible if they used a health economic model with quality-adjusted life-years or disability-adjusted life-years as an outcome measure. Data related to various methodological characteristics were extracted from the included studies. The available modelling techniques were evaluated based on 11 predefined criteria. This methodological review included 41 model-based studies, of which 21 used decision trees (DTs), 15 used cohort-based state-transition Markov models (CMMs), two used individual-based state-transition models (ISMs), and three used discrete-event simulation (DES) models. Just over half of the studies (54%) evaluated antidepressants compared with a control condition. The data sources, time horizons, cycle lengths, perspectives adopted and number of health states/events all varied widely between the included studies. DTs scored positively in four of the 11 criteria, CMMs in five, ISMs in six, and DES models in seven. There were substantial methodological differences between the studies. Since the individual history of each patient is important for the prognosis of depression, DES and ISM simulation methods may be more appropriate than the others for a pragmatic representation of the course of depression. However, direct comparisons between the available modelling techniques are necessary to yield firm conclusions.

Improving Weak Lensing Mass Map Reconstructions using Gaussian and Sparsity Priors: Application to DES SV

NASA Astrophysics Data System (ADS)

Jeffrey, N.; Abdalla, F. B.; Lahav, O.; Lanusse, F.; Starck, J.-L.; Leonard, A.; Kirk, D.; Chang, C.; Baxter, E.; Kacprzak, T.; Seitz, S.; Vikram, V.; Whiteway, L.; Abbott, T. M. C.; Allam, S.; Avila, S.; Bertin, E.; Brooks, D.; Rosell, A. Carnero; Kind, M. Carrasco; Carretero, J.; Castander, F. J.; Crocce, M.; Cunha, C. E.; D'Andrea, C. B.; da Costa, L. N.; Davis, C.; De Vicente, J.; Desai, S.; Doel, P.; Eifler, T. F.; Evrard, A. E.; Flaugher, B.; Fosalba, P.; Frieman, J.; García-Bellido, J.; Gerdes, D. W.; Gruen, D.; Gruendl, R. A.; Gschwend, J.; Gutierrez, G.; Hartley, W. G.; Honscheid, K.; Hoyle, B.; James, D. J.; Jarvis, M.; Kuehn, K.; Lima, M.; Lin, H.; March, M.; Melchior, P.; Menanteau, F.; Miquel, R.; Plazas, A. A.; Reil, K.; Roodman, A.; Sanchez, E.; Scarpine, V.; Schubnell, M.; Sevilla-Noarbe, I.; Smith, M.; Soares-Santos, M.; Sobreira, F.; Suchyta, E.; Swanson, M. E. C.; Tarle, G.; Thomas, D.; Walker, A. R.

2018-05-01

Mapping the underlying density field, including non-visible dark matter, using weak gravitational lensing measurements is now a standard tool in cosmology. Due to its importance to the science results of current and upcoming surveys, the quality of the convergence reconstruction methods should be well understood. We compare three methods: Kaiser-Squires (KS), Wiener filter, and GLIMPSE. KS is a direct inversion, not accounting for survey masks or noise. The Wiener filter is well-motivated for Gaussian density fields in a Bayesian framework. GLIMPSE uses sparsity, aiming to reconstruct non-linearities in the density field. We compare these methods with several tests using public Dark Energy Survey (DES) Science Verification (SV) data and realistic DES simulations. The Wiener filter and GLIMPSE offer substantial improvements over smoothed KS with a range of metrics. Both the Wiener filter and GLIMPSE convergence reconstructions show a 12% improvement in Pearson correlation with the underlying truth from simulations. To compare the mapping methods' abilities to find mass peaks, we measure the difference between peak counts from simulated ΛCDM shear catalogues and catalogues with no mass fluctuations (a standard data vector when inferring cosmology from peak statistics); the maximum signal-to-noise of these peak statistics is increased by a factor of 3.5 for the Wiener filter and 9 for GLIMPSE. With simulations we measure the reconstruction of the harmonic phases; the phase residuals' concentration is improved 17% by GLIMPSE and 18% by the Wiener filter. The correlation between reconstructions from data and foreground redMaPPer clusters is increased 18% by the Wiener filter and 32% by GLIMPSE.

Fast Plasma Instrument for MMS: Data Compression Simulation Results

NASA Technical Reports Server (NTRS)

Barrie, A.; Adrian, Mark L.; Yeh, P.-S.; Winkert, G. E.; Lobell, J. V.; Vinas, A.F.; Simpson, D. J.; Moore, T. E.

2008-01-01

Magnetospheric Multiscale (MMS) mission will study small-scale reconnection structures and their rapid motions from closely spaced platforms using instruments capable of high angular, energy, and time resolution measurements. To meet these requirements, the Fast Plasma Instrument (FPI) consists of eight (8) identical half top-hat electron sensors and eights (8) identical ion sensors and an Instrument Data Processing Unit (IDPU). The sensors (electron or ion) are grouped into pairs whose 6 deg x 180 deg fields-of-view (FOV) are set 90 deg apart. Each sensor is equipped with electrostatic aperture steering to allow the sensor to scan a 45 deg x 180 deg fan about its nominal viewing (0 deg deflection) direction. Each pair of sensors, known as the Dual Electron Spectrometer (DES) and the Dual Ion Spectrometer (DIS), occupies a quadrant on the MMS spacecraft and the combination of the eight electron/ion sensors, employing aperture steering, image the full-sky every 30-ms (electrons) and 150-ms (ions), respectively. To probe the results in the DES complement of a given spacecraft generating 6.5-Mbs(exp -1) of electron data while the DIS generates 1.1-Mbs(exp -1) of ion data yielding an FPI total data rate of 6.6-MBs(exp -1). The FPI electron/ion data is collected by the IDPU then transmitted to the Central Data Instrument Processor (CIDP) on the spacecraft for science interest ranking. Only data sequences that contain the greatest amount of temporal/spatial structure will be intelligently down-linked by the spacecraft. Currently, the FPI data rate allocation to the CIDP is 1.5-Mbs(exp -1). Consequently, the FPI-IDPU must employ data/image compression to meet this CIDP telemetry allocation. Here, we present simulations of the CCSDS 122.0-B-1 algorithm-based compression of the FPI-DES electron data. Compression analysis is based upon a seed of re-processed Cluster/PEACE electron measurements. Topics to be discussed include: review of compression algorithm; data quality; data formatting/organization; and, implications for data/matrix pruning. To conclude a presentation of the base-lined FPI data compression approach is provided.

Analyse de l'état mécanique et microstructural de films minces supraconducteurs YBa_2 Cu_3O_7 par diffraction des rayons X

NASA Astrophysics Data System (ADS)

Auzary, S.; Badawi, K. F.; Bimbault, L.; Rabier, J.; Gaboriaud, R. J.; Goudeau, Ph.

1997-01-01

Mechanical and microstructural analysis in a 100nm thin film is presented in this study. Using X-ray diffraction with a tensorial approach, we have determined stresses, strains, stress-free lattice parameters, microdistorsions and diffracting coherent domains size. Stress-free lattice parameters are higher than the bulk values. A high value of stresses is explained as a combination of coherent stresses, thermal stresses and intrinsic ones. Diffraction peaks line profiles analysis suggests grain boundaries presence as well as high lattice elastic microdistorsions. Cette étude présente une analyse de l'état mécanique et microstructurale dans un film mince de 100nm d'épaisseur d'YBCO déposé sur un substrat de MgO. En utilisant la diffraction des rayons X couplée à une approche tensorielle, nous avons déterminé les déformations, les contraintes, les paramètres libres de contraintes, les microdistorsions élastiques ainsi que la taille des domaines cohérents de diffraction. Les paramètres libres de contrainte sont supérieurs à ceux du massif. Une valeur élevée des contraintes est expliquée à partir des contraintes de cohérence, des contraintes thermiques et intrinsèques. L'analyse des profils des pics de diffraction suggère la présence de sous-joints et de distorsions élastiques élevées au niveau des mailles cristallographiques.

Unsteady Three-Dimensional Simulation of a Shear Coaxial GO2/GH2 Rocket Injector with RANS and Hybrid-RAN-LES/DES Using Flamelet Models

NASA Technical Reports Server (NTRS)

Westra, Doug G.; West, Jeffrey S.; Richardson, Brian R.

2015-01-01

Historically, the analysis and design of liquid rocket engines (LREs) has relied on full-scale testing and one-dimensional empirical tools. The testing is extremely expensive and the one-dimensional tools are not designed to capture the highly complex, and multi-dimensional features that are inherent to LREs. Recent advances in computational fluid dynamics (CFD) tools have made it possible to predict liquid rocket engine performance, stability, to assess the effect of complex flow features, and to evaluate injector-driven thermal environments, to mitigate the cost of testing. Extensive efforts to verify and validate these CFD tools have been conducted, to provide confidence for using them during the design cycle. Previous validation efforts have documented comparisons of predicted heat flux thermal environments with test data for a single element gaseous oxygen (GO2) and gaseous hydrogen (GH2) injector. The most notable validation effort was a comprehensive validation effort conducted by Tucker et al. [1], in which a number of different groups modeled a GO2/GH2 single element configuration by Pal et al [2]. The tools used for this validation comparison employed a range of algorithms, from both steady and unsteady Reynolds Averaged Navier-Stokes (U/RANS) calculations, large-eddy simulations (LES), detached eddy simulations (DES), and various combinations. A more recent effort by Thakur et al. [3] focused on using a state-of-the-art CFD simulation tool, Loci/STREAM, on a two-dimensional grid. Loci/STREAM was chosen because it has a unique, very efficient flamelet parameterization of combustion reactions that are too computationally expensive to simulate with conventional finite-rate chemistry calculations. The current effort focuses on further advancement of validation efforts, again using the Loci/STREAM tool with the flamelet parameterization, but this time with a three-dimensional grid. Comparisons to the Pal et al. heat flux data will be made for both RANS and Hybrid RANSLES/ Detached Eddy simulations (DES). Computation costs will be reported, along with comparison of accuracy and cost to much less expensive two-dimensional RANS simulations of the same geometry.

Fabrication de memoire monoelectronique non volatile par une approche de nanogrille flottante

NASA Astrophysics Data System (ADS)

Guilmain, Marc

Les transistors monoelectroniques (SET) sont des dispositifs de tailles nanometriques qui permettent la commande d'un electron a la fois et donc, qui consomment peu d'energie. Une des applications complementaires des SET qui attire l'attention est son utilisation dans des circuits de memoire. Une memoire monoelectronique (SEM) non volatile a le potentiel d'operer a des frequences de l'ordre des gigahertz ce qui lui permettrait de remplacer en meme temps les memoires mortes de type FLASH et les memoires vives de type DRAM. Une puce SEM permettrait donc ultimement la reunification des deux grands types de memoire au sein des ordinateurs. Cette these porte sur la fabrication de memoires monoelectroniques non volatiles. Le procede de fabrication propose repose sur le procede nanodamascene developpe par C. Dubuc et al. a 1'Universite de Sherbrooke. L'un des avantages de ce procede est sa compatibilite avec le back-end-of-line (BEOL) des circuits CMOS. Ce procede a le potentiel de fabriquer plusieurs couches de circuits memoirestres denses au-dessus de tranches CMOS. Ce document presente, entre autres, la realisation d'un simulateur de memoires monoelectroniques ainsi que les resultats de simulations de differentes structures. L'optimisation du procede de fabrication de dispositifs monoelectroniques et la realisation de differentes architectures de SEM simples sont traitees. Les optimisations ont ete faites a plusieurs niveaux : l'electrolithographie, la gravure de l'oxyde, le soulevement du titane, la metallisation et la planarisation CMP. La caracterisation electrique a permis d'etudier en profondeur les dispositifs formes de jonction de Ti/TiO2 et elle a demontre que ces materiaux ne sont pas appropries. Par contre, un SET forme de jonction de TiN/Al2O3 a ete fabrique et caracterise avec succes a basse temperature. Cette demonstration demontre le potentiel du procede de fabrication et de la deposition de couche atomique (ALD) pour la fabrication de memoires monoelectroniques. Mots-cles: Transistor monoelectronique (SET), memoire monoelectronique (SEM), jonction tunnel, temps de retention, nanofabrication, electrolithographie, planarisation chimicomecanique.

Prédiction du comportement à long terme des matériaux polymères

NASA Astrophysics Data System (ADS)

Lemaire, J.

1998-06-01

Most of the world activity on research, development and control of polymer durability is still based on empirical techniques developed in the early ages of polymer uses. Those techniques should be critically analysed considering the state of the art in the fundamental understanding of these complex phenomena. A more rational approach is described, especially to predict the lifetime of polymeric materials in environmental conditions. That approach is based on the recognition of the chemical evolution mechanisms. Les activités de recherche, développement et contrôle de durabilité des matériaux polymères sont encore, pour une part très importante, basées sur l'emploi de techniques empiriques dont les principes ont été énoncés dès le début de l'exploitation de ces matériaux. Une analyse critique de ces méthodes s'impose aujourd'hui en tenant compte de l'avancement des connaissances. Une approche plus rationnelle est décrite, approche basée sur la reconnaissance des mécanismes d'évolution chimique. A titre d'exemple, le mécanisme d'évolution du PVC sous contraintes conjuguées de l'UV, de la chaleur et de l'oxygène, est décrit. Des études récentes de photooxydation de polymères conducteurs au sein de polyéthylène sont également succinctement rapportées.

Frontal Affinity Chromatography with Mass Spectrometry Detection for Probing Molecular Interactions. A New Mechanistic Approach for the Development of Detection & Identification and Medical Countermeasures Against CB Agents

DTIC Science & Technology

2005-10-01

l’optimisation des composants les plus prometteurs pour la d~couverte des m~dicaments. La technique CAF-SM est capable de localiser et de caract~riser...technique d’avant-garde peut ainsi aiguiller ]a recherche biotechnologique A travers les domaines cl~s et 6liminer beaucoup d’ann6es d’exp6rimentation...A l’aveuglette »). Ceci permettra de rationaliser le concept et la mise au point dans des domaines tels que la bio- detection et l’identification

Elaboration de nouvelles approches micromecaniques pour l'optimisation des performances mecaniques des materiaux heterogenes

NASA Astrophysics Data System (ADS)

Aboutajeddine, Ahmed

Les modeles micromecaniques de transition d'echelles qui permettent de determiner les proprietes effectives des materiaux heterogenes a partir de la microstructure sont consideres dans ce travail. L'objectif est la prise en compte de la presence d'une interphase entre la matrice et le renforcement dans les modeles micromecaniques classiques, de meme que la reconsideration des approximations de base de ces modeles, afin de traiter les materiaux multiphasiques. Un nouveau modele micromecanique est alors propose pour tenir compte de la presence d'une interphase elastique mince lors de la determination des proprietes effectives. Ce modele a ete construit grace a l'apport de l'equation integrale, des operateurs interfaciaux de Hill et de la methode de Mori-Tanaka. Les expressions obtenues pour les modules globaux et les champs dans l'enrobage sont de nature analytique. L'approximation de base de ce modele est amelioree par la suite dans un nouveau modele qui s'interesse aux inclusions enrobees avec un enrobage mince ou epais. La resolution utilisee s'appuie sur une double homogeneisation realisee au niveau de l'inclusion enrobee et du materiau. Cette nouvelle demarche, permettra d'apprehender completement les implications des approximations de la modelisation. Les resultats obtenus sont exploites par la suite dans la solution de l'assemblage de Hashin. Ainsi, plusieurs modeles micromecaniques classiques d'origines differentes se voient unifier et rattacher, dans ce travail, a la representation geometrique de Hashin. En plus de pouvoir apprecier completement la pertinence de l'approximation de chaque modele dans cette vision unique, l'extension correcte de ces modeles aux materiaux multiphasiques est rendue possible. Plusieurs modeles analytiques et explicites sont alors proposee suivant des solutions de differents ordres de l'assemblage de Hashin. L'un des modeles explicite apparait comme une correction directe du modele de Mori-Tanaka, dans les cas ou celui ci echoue a donner de bons resultats. Finalement, ce modele de Mori-Tanaka corrige est utilise avec les operateurs de Hill pour construire un modele de transition d'echelle pour les materiaux ayant une interphase elastoplastique. La loi de comportement effective trouvee est de nature incrementale et elle est conjuguee a la relation de la plasticite de l'interphase. Des simulations d'essais mecaniques pour plusieurs proprietes de l'interphase plastique a permis de dresser des profils de l'enrobage octroyant un meilleur comportement au materiau.

Magnetoresistance Studies in the Low-Dimensional Organic Metal α-(ET){2}TlHg(SeCN){4} under Pressure: Experiments and Simulation by Tight Binding Band Structure Calculations

NASA Astrophysics Data System (ADS)

Auban-Senzier, P.; Audouard, A.; Laukhin, V. N.; Rousseau, R.; Canadell, E.; Brossard, L.; Jérome, D.; Kushch, N. D.

1995-10-01

Magnetotransport measurements have been carried out in layered organic metal α-(ET){2}TlHg(SeCN){4} at temperatures down to 0.4 K and under hydrostatic pressure. Only one... Des mesures de magnétorésistance ont été effectuées dans le conducteur organique bidimensionnel α-(ET){2}TlHg(SeCN){4} jusqu'à la température de 0.4 K et sous pression hydrostatique. Une seule série d'oscillations Shubnikov-de Haas est observée dans la gamme de pression comprise entre 3.5 et 11 kbar. La masse cyclotron décroit lentement lorsque la pression augmente et la fréquence des oscillations augmente rapidement depuis la valeur de (653± 3)T à pression ambiante jusqu'à (790± 3)T à 11 kbar. Une modélisation basée sur la méthode des liaisons fortes suggère que la dépendance en pression de l'aire de l'orbite fermée de la surface de Fermi est due au glissement, induit par la pression, des molécules des chaines ne contenant qu'un type de donneurs. Au contraire de son composé frère α-(ET){2}NH{4}Hg(SCN){4}, il présente des oscillations lentes, de fréquence (47± 3)T, à pression ambiante. Elles ne sont pas observées entre 3.5 et 11 kbar et pourraient être en relation avec un emboîtement des orbites ouvertes à pression ambiante qui pourraient détruire la supraconductivité dans le composé à base de sélénium.

Fissuration en relaxation des aciers inoxydables austénitiques au voisinage des soudures

NASA Astrophysics Data System (ADS)

Auzoux, Q.; Allais, L.; Gourgues, A. F.; Pineau, A.

2003-03-01

Des fissures intergranulaires peuvent se développer au voisinage des soudures des aciers inoxydables austénitiques lorsqu'ils sont réchauffés dans le domaine de température compris entre 500^{circ}C et 700^{circ}C. A ces températures, les contraintes résiduelles post-soudage se relaxent par déformation viscoplastique. Il peut arriver que ces zones proches de la soudure soient tellement fragiles, qu'elles ne puissent accommoder cette faible déformation. Afin de préciser quelles peuvent être les modifications microstructurales qui conduisent à une telle fragilisation, on a examiné les microstructures de ces zones et révélé ainsi un écrouissage résiduel, responsable d'une forte élévation de la dureté. On a pu reproduire par hypertrempe puis laminage entre 400^{circ}C et 600^{circ}C une microstructure similaire. Des essais mécaniques (traction, fluage, relaxation, sur éprouvettes lisses et pré-fissurées) ont été réalisés à 550^{circ}C et à 600^{circ}C sur ces zones affectées simulées et sur un état de référence hypertrempé. Ils ont montré que l'écrouissage diminuait la ductilité dans le domaine de rupture intergranulaire, sans modifier qualitativement le mécanisme d'endommagement. Pendant la pré-déformation les incompatibilités de déformation entre grains conduiraient à l'existence de contraintes locales élevées qui favoriseraient la germination des cavités intergranulaires.

The Rapid Disaster Evaluation System (RaDES): A Plan to Improve Global Disaster Response by Privatizing the Assessment Component.

PubMed

Iserson, Kenneth V

2017-09-01

Emergency medicine personnel frequently respond to major disasters. They expect to have an effective and efficient management system to elegantly allocate available resources. Despite claims to the contrary, experience demonstrates this rarely occurs. This article describes privatizing disaster assessment using a single-purposed, accountable, and well-trained organization. The goal is to achieve elegant disaster assessment, rather than repeatedly exhorting existing groups to do it. The Rapid Disaster Evaluation System (RaDES) would quickly and efficiently assess a postdisaster population's needs. It would use an accountable nongovernmental agency's teams with maximal training, mobility, and flexibility. Designed to augment the Inter-Agency Standing Committee's 2015 Emergency Response Preparedness Plan, RaDES would provide the initial information needed to avoid haphazard and overlapping disaster responses. Rapidly deployed teams would gather information from multiple sources and continually communicate those findings to their base, which would then disseminate them to disaster coordinators in a concise, coherent, and transparent way. The RaDES concept represents an elegant, minimally bureaucratic, and effective rapid response to major disasters. However, its implementation faces logistical, funding, and political obstacles. Developing and maintaining RaDES would require significant funding and political commitment to coordinate the numerous agencies that claim to be performing the same tasks. Although simulations can demonstrate efficacy and deficiencies, only field tests will demonstrate RaDES' power to improve interagency coordination and decrease the cost of major disaster response. At the least, the RaDES concept should serve as a model for discussing how to practicably improve our current chaotic disaster responses. Copyright © 2016 Elsevier Inc. All rights reserved.

Effet de la composition des materiaux composites sur la caracterisation et detection par ondes de Lamb

NASA Astrophysics Data System (ADS)

Ostiguy, Pierre-Claude

Les matériaux composites sont de plus en plus utilisés en aéronautique. Leurs excellentes propriétés mécaniques et leur faible poids leur procurent un avantage certain par rapport aux matériaux métalliques. Ceux-ci étant soumis à diverses conditions de chargement et environnementales, ils sont suceptibles de subir plusieurs types d'endommagements, compromettant leur intégrité. Des méthodes fiables d'inspection sont donc nécessaires pour évaluer leur intégrité. Néanmoins, peu d'approches non destructives, embarquées et efficaces sont présentement utilisées. Ce travail de recherche se penche sur l'étude de l'effet de la composition des matériaux composites sur la détection et la caractérisation par ondes guidées. L'objectif du projet est de développer une approche de caractérisation mécanique embarquée permettant d'améliorer la performance d'une approche d'imagerie par antenne piézoélectriques sur des structures composite et métalliques. La contribution de ce projet est de proposer une approche embarquée de caractérisation mécanique par ultrasons qui ne requiert pas une mesure sur une multitude d'échantillons et qui est non destructive. Ce mémoire par articles est divisé en quatre parties, dont les parties deux A quatre présentant les articles publiés et soumis. La première partie présente l'état des connaissances dans la matière nécessaires à l'acomplissement de ce projet de maîtrise. Les principaux sujets traités portent sur les matériaux composites, propagation d'ondes, la modélisation des ondes guidées, la caractérisation par ondes guidées et la surveillance embarquée des structures. La deuxième partie présente une étude de l'effet des propriétés mécaniques sur la performance de l'algorithme d'imagerie Excitelet. L'étude est faite sur une structure isotrope. Les résultats ont démontré que l'algorithme est sensible à l'exactitude des propriétés mécaniques utilisées dans le modèle. Cette sensibilité a également été explorée afin de développer une méthode embarquée permettant d'évaluer les propriétés mécaniques d'une structure. La troisième partie porte sur une étude plus rigoureuse des performances de la méthode de caractérisation mécanique embarquée. La précision, la répétabilité et la robustesse de la méthode sont validés à l'aide d'un simulateur par FEM. Les propriétés estimées avec l'approche de caractérisation sont à moins de 1% des propriétés utilisées dans le modèle, ce qui rivalise avec l'incertitude des méthodes ASTM. L'analyse expérimentale s'est avérée précise et répétable pour des fréquences sous les 200 kHz, permettant d'estimer les propriétés mécaniques à moins de 1% des propriétés du fournisseur. La quatrième partie a démontrée la capacité de l'approche de caractérisation à identifier les propriétés mécaniques d'une plaques composite orthotrope. Les résultats estimés expérimentalement sont inclus dans les barres d'incertitude des propriétés estimées à l'aide des tests ASTM. Finalement, une simulation FEM a démontré la précision de l'approche avec des propriétés mécaniques à moins de 4 % des propriétés du modèle simulé. Mots-clés : Inspection non destructive, composites, caractérisation mécanique, ultrasons, imagerie, SHM, ondes guidées.

Études par diffraction haute résolution et réflectivité de films minces épitaxiés

NASA Astrophysics Data System (ADS)

Baulès, P.; Casanove, M. J.; Roucau, C.; Ousset, J. C.; Bobo, J. F.; Snoeck, E.; Magnoux, D.; Gatel, C.

2002-07-01

The studies we present concern the general researches involved in order to understand the growth mechanisms of thin films deposited on oriented substrates. Among the different investigation technics of the thin layers, X-ray diffraction and reflectivity will be discussed through two applications. In a first step, thediffraction presented, illustrated by reciprocal space mapping, will give information about the layer state of stress and the lattice distorsion of La{1-x}SrxMnO3 deposited on SrTiO3. The results obtained are discussed and compared to those given by electron microscopy. In a second step, we will present an application of reflectivity concerning a very roughness surface of platinum deposited on MgO showing an island growth process. We will verify that reflectivity can lead to the determination of the recovered rate of the surface, even if some problems exist in the simulation of the whole data set. Results obtained in electron microscopy will complete those issued from reflectivity. Les études que nous allons présenter sont à replacer dans le contexte général de la compréhension des mécanismes de croissance des films minces déposés sur des substrats orientés. Parmi les diverses techniques d'investigations des couches minces, la diffraction et la réflectivité des rayons X vont être abordées à travers deux applications. Nous verrons tout d'abord que la diffraction, illustrée par la cartographie en deux dimension du réseau réciproque, permet de remonter à l'état de contrainte ainsi qu'à la déformation de la maille de La{1-x}SrxMnO3 déposé sur SrTiO3. Les résultats déduits de ces mesures seront discutés et comparés à ceux obtenus en microscopie électronique. Dans la suite de l'article, nous verrons une des applications de la réflectivité, sur une surface très perturbée de platine déposé sur MgO et présentant une croissance en îlots. Nous verrons que la réflectivité permet d'estimer le taux de recouvrement de la surface, mais que des problèmes persistent dans la simulation de l'intégralité des données expérimentales. Les résultats obtenus en MET viendront compléter ceux issus de la réflectivité.

A Feminist Intervention That Hurt Women: Biological Differences, Ergonomics, and Occupational Health: Une intervention féministe qui a nui aux femmes: différences biologiques, égalité, ergonomie et santé au travail.

PubMed

Messing, Karen

2017-11-01

The University of Québec in Montréal has agreements with trade unions providing access to university resources. Researchers involved in this program worked in partnership with union women's and health and safety committees for more than twenty years. Not all studies succeeded in improving women's working conditions. One joint project involved observational studies of tasks done by health-care workers, complemented by interviews and questionnaires. We found that task assignments, movements, postures, and work-related musculoskeletal disorders varied by gender/sex and made recommendations for change. However, issues of pay equity, spending on health care, and contracting-out of "ancillary work" were salient. Researchers learned that in the absence of changes in power relationships in the workplace, women may be disadvantaged by denial as well as by exaggeration of female-male differences. Men may also be at risk when their gender is invisible. We suggest some feminist approaches to workplace solutions and some pathways for research. Résumé L'Université du Québec à Montréal a signé avec des centrales syndicales des ententes leur donnant un accès à des ressources universitaires. Des chercheures ont travaillé en partenariat avec des comités syndicaux de condition des femmes et de santé-sécurité au travail pendant plus de 25 ans, mais ce ne sont pas toutes les études qui ont abouti à des améliorations. Un projet concernait des observations du travail d'employé.e.s du secteur de la santé, dont les tâches, mouvements, et postures variaient selon le genre/sexe. Nous avons recommandé des transformations, mais des enjeux d'équité salariale, de coûts et de sous-traitance y ont fait obstacle. Les chercheures ont appris qu'en l'absence de transformation des rapports de pouvoir au travail, le déni des différences hommes-femmes, autant que leur exagération, peut désavantager les travailleuses (et les travailleurs). Nous suggérons des approches féministes aux solutions pour le milieu de travail, ainsi que des pistes de recherche.

Validation of an Acoustic Head Simulator for the Evaluation of Personal Hearing Protection Devices

DTIC Science & Technology

2004-11-01

et recouvert de peau artificielle. Les cavités de chaque côté permettent l’insertion de modules d’oreilles qui reproduisent les mécanismes des ...aux spécifications publiées. Ces différences n’ont pas influé sur la perte d’insertion. Après correction pour tenir compte des effets de la...un simulateur de tête époxy chargé d’aluminium et recouvert de peau artificielle. La tête est soutenue par un module de cou souple rattaché à un

Experimental Verification of Multiple-input Multiple Output (MIMO) Beamforming Capabilities Using a Time-division Coherent MIMO Radar

DTIC Science & Technology

2015-04-01

MIMO cohérents ou co-localisés, pour obtenir une compréhen- sion précise de leurs bénéfices potentiels. Le diagramme de rayonnement de l’antenne...d’expérimentations et de simulations (MESA), sont également discutés. On y trouve que les faisceaux principaux des diagrammes de rayonnement expérimen- taux...concordent avec ceux des diagrammes théoriques. On y montre que MIMO-1 a le même diagramme de rayonnement bidirectionel que la configuration radar à

Experimental Verification of Multiple-input Multiple Output (MIMO) Beamforming Capabilities Using a Time-division Coherent MIMO Radar

DTIC Science & Technology

2015-02-01

MIMO cohérents ou co-localisés, pour obtenir une compréhen- sion précise de leurs bénéfices potentiels. Le diagramme de rayonnement de l’antenne...d’expérimentations et de simulations (MESA), sont également discutés. On y trouve que les faisceaux principaux des diagrammes de rayonnement expérimen- taux...concordent avec ceux des diagrammes théoriques. On y montre que MIMO-1 a le même diagramme de rayonnement bidirectionel que la configuration radar à

Experimental Verification of Multiple-input Multiple Output (MIMO) Beamforming Capabilities Using a Time-division Coherent MIMO Radar

DTIC Science & Technology

2015-03-01

MIMO cohérents ou co-localisés, pour obtenir une compréhen- sion précise de leurs bénéfices potentiels. Le diagramme de rayonnement de l’antenne...d’expérimentations et de simulations (MESA), sont également discutés. On y trouve que les faisceaux principaux des diagrammes de rayonnement expérimen- taux...concordent avec ceux des diagrammes théoriques. On y montre que MIMO-1 a le même diagramme de rayonnement bidirectionel que la configuration radar à

Modélisation de matériaux chiraux à structures hétérogènes (modèle MTWC) : théorie, validations expérimentales et applications

NASA Astrophysics Data System (ADS)

Mariotte, F.; Sauviac, B.; Héliot, J. Ph.

1995-10-01

After a brief overview of the concept of electromagnetic chirality, this paper deals with a numerical simulation of isotropic composites with metallic chiral inclusions: computations of permittivity, permeability and chirality parameter as functions of frequency are presented. The theoretical results are, step by step, compared with measurements of chiral composites at microwave frequencies. The application of such media in Radar Cross-Section (RCS) management and control is discussed. The introduction of chiral inclusions seems to make impedance matching possible and may lead to attractive shields with lower reflectivity and larger bandwidth. However the optimization of material characteristics necessary to get a specific absorber remains a difficult task. Après un bref rappel du principe de la chiralité, cet article présente une modélisation des propriétés effectives des matériaux hétérogènes à inclusions chirales métalliques : calcul de la permittivité, perméabilité et coefficient de chiralité du composite en fonction de la fréquence. Les résultats théoriques sont validés, pas à pas, par des mesures effectuées sur des composites chiraux de natures différentes. L'application de tels matériaux à la conception de matériaux absorbant les ondes électromagnétiques est ensuite envisagée. Les inclusions chirales semblent offrir la possibilité de régler l'impédance à l'interface air-milieu absorbant permettant ainsi de concevoir des absorbants micro-ondes plus performants en terme d'atténuation ou de largeur de bande. L'optimisation des caractéristiques des matériaux pour obtenir des performances données restent néanmoins très délicate.

Methodologies nouvelles pour la realisation d'essais dans la soufflerie Price-Paidoussis

NASA Astrophysics Data System (ADS)

Flores Salinas, Manuel

Le present memoire en genie de la production automatisee vise a decrire le travail effectue dans la soufflerie Price-Paidoussis du laboratoire LARCASE pour trouver les methodologies experimentales et les procedures de tests, qui seront utilisees avec les modeles d'ailes actuellement au laboratoire. Les methodologies et procedures presentees ici vont permettre de preparer les tests en soufflerie du projet MDO-505 Architectures et technologies deformables pour l'amelioration des performances des ailes, qui se derouleront durant l'annee 2015. D'abord, un bref historique des souffleries subsoniques sera fait. Les differentes sections de la soufflerie Price-Paidoussis seront decrites en mettant l'emphase sur leur influence dans la qualite de l'ecoulement qui se retrouve dans la chambre d'essai. Ensuite, une introduction a la pression, a sa mesure lors de tests en soufflerie et les instruments utilises pour les tests en soufflerie au laboratoire LARCASE sera presente, en particulier le capteur piezoelectrique XCQ-062. Une attention particuliere sera portee au mode de fonctionnement, a son installation, a la mesure et a la detection des frequences et aux sources d'erreurs lorsqu'on utilise des capteurs de haute precision comme la serie XCQ-062 du fournisseur Kulite. Finalement, les procedures et les methodologies elaborees pour les tests dans la soufflerie Price-Paidoussis seront utilisees sur quatre types d'ailes differentes. L'article New methodology for wind tunnel calibration using neural networks - EGD approch portant sur une nouvelle facon de predire les caracteristiques de l'ecoulement a l'interieur de la soufflerie Price-Paidoussis se trouve dans l'annexe 2 de ce document. Cet article porte sur la creation d'un reseau de neurones multicouche et sur l'entrainement des neurones, Ensuite, une comparaison des resultats du reseau de neurones a ete fait avec des valeurs simules avec le logiciel Fluent.

Numerical study on wake characteristics of high-speed trains

NASA Astrophysics Data System (ADS)

Yao, Shuan-Bao; Sun, Zhen-Xu; Guo, Di-Long; Chen, Da-Wei; Yang, Guo-Wei

2013-12-01

Intensive turbulence exists in the wakes of high speed trains, and the aerodynamic performance of the trailing car could deteriorate rapidly due to complicated features of the vortices in the wake zone. As a result, the safety and amenity of high speed trains would face a great challenge. This paper considers mainly the mechanism of vortex formation and evolution in the train flow field. A real CRH2 model is studied, with a leading car, a middle car and a trailing car included. Different running speeds and cross wind conditions are considered, and the approaches of unsteady Reynold-averaged Navier-Stokes (URANS) and detached eddy simulation (DES) are utilized, respectively. Results reveal that DES has better capability of capturing small eddies compared to URANS. However, for large eddies, the effects of two approaches are almost the same. In conditions without cross winds, two large vortex streets stretch from the train nose and interact strongly with each other in the wake zone. With the reinforcement of the ground, a complicated wake vortex system generates and becomes strengthened as the running speed increases. However, the locations of flow separations on the train surface and the separation mechanism keep unchanged. In conditions with cross winds, three large vortices develop along the leeward side of the train, among which the weakest one has no obvious influence on the wake flow while the other two stretch to the tail of the train and combine with the helical vortices in the train wake. Thus, optimization of the aerodynamic performance of the trailing car should be aiming at reducing the intensity of the wake vortex system.

Cost effectiveness of drug-eluting stents in acute myocardial infarction patients in Germany: results from administrative data using a propensity score-matching approach.

PubMed

Bäumler, Michael; Stargardt, Tom; Schreyögg, Jonas; Busse, Reinhard

2012-07-01

The high number of patients with acute myocardial infarction (AMI) has facilitated greater research, resulting in the development of innovative medical devices. So far, results from economic evaluations that compared drug-eluting stents (DES) and bare-metal stents (BMS) have not shown clear evidence that one intervention is more cost effective than the other. The aim of this study was to measure the cost effectiveness of DES compared with BMS in routine care. We used administrative data from a large German sickness fund to compare the costs and effectiveness of DES and BMS in patients with AMI. Patients with hospital admission after AMI in 2004 and 2005 were followed up for 1 year after hospital discharge. The cost of treatment and survival after 365 days were compared for patients treated with DES and BMS. We adjusted for covariates defined according to the Ontario Acute Myocardial Infarction Mortality Prediction Rules using propensity score matching. After matching, we calculated incremental cost-effectiveness ratios (ICERs) by (i) using sample means based on bootstrapping procedures and (ii) estimating generalized linear mixed models for costs and survival. After propensity score matching, the sample included 719 patients treated with DES and 719 patients treated with BMS. A comparison of sample means resulted in average costs of € 12 714 and € 11 714 for DES and BMS, respectively, in 2005 German euros. Difference in 365-day survival was not statistically significant (700 patients with DES and 701 with BMS). The ICER of DES versus BMS was -€ 718 709 per life saved. Bootstrapping resulted in DES being dominated by BMS in 54.5% of replications and DES being a dominant strategy in 2.7% of replications. Results from regression models and sensitivity analyses confirm these results. Treatment with DES after admission with AMI is less cost effective than treatment with BMS. Our results are in line with other cost-effectiveness analyses that used administrative data, i.e. under routine care conditions. However, our results do not preclude that DES may be cost effective in specific patient subgroups.

Effect of tension and curvature on the chemical potential of lipids in lipid aggregates.

PubMed

Grafmüller, Andrea; Lipowsky, Reinhard; Knecht, Volker

2013-01-21

Understanding the factors that influence the free energy of lipids in bilayer membranes is an essential step toward understanding exchange processes of lipids between membranes. In general, both lipid composition and membrane geometry can affect lipid exchange rates between bilayer membranes. Here, the free energy change ΔG(des) for the desorption of dipalmitoyl-phosphatidylcholine (DPPC) lipids from different lipid aggregates has been computed using molecular dynamics simulations and umbrella sampling. The value of ΔG(des) is found to depend strongly on the local properties of the aggregate, in that both tension and curvature lead to an increase in ΔG(des). A detailed analysis shows that the increased desorption free energy for tense bilayers arises from the increased conformational entropy of the lipid tails, which reduces the favorable component -TΔS(L) of the desorption free energy.

Test Methodology for Protection of Vehicle Occupants against Anti-Vehicular Landmine Effects (Methodologie d’essais pour la protection des occupants de vehicules contre les effets des mines terrestres anti-vehicules)

DTIC Science & Technology

2007-04-01

1 Chapter 1 – Introduction 1 - 1 1.1 Background and Problem Definition 1 - 1 1.1.1...Background 1 - 1 1.1.2 Problem Definition 1 -2 1.2 The Objective and Approach of the HFM-090/TG-25 1 -2 1.2.1 Objective 1 -2 1.2.2 Approach 1 -2 1.3...Organization of this Report 1 -3 1.4 References 1 -3 Chapter 2 – The Mine Detonation Process and Occupant Loading 2- 1 2.1 Introduction to Mines 2- 1 2.2

Analysis of a Simulation Experiment on Optimized Crewing for Damage Control

DTIC Science & Technology

2012-06-01

base donnaient un rendement supérieur à l’automatisation moyenne pour l’intervention en cas d’inondation. À partir de ces analyses, les auteurs du...et l’analyse ultérieures de données aux fins d’expériences de simulation semblables. Enfin, les auteurs du rapport ont établi des pistes...DRDC Toronto. [6] Floyd, J., Hunt, S., Williams, F., & Tatem, P. (2004). Fire + Smoke Simulator (FSSIM), Version 1 - Theory manual (NRL/MR/6180-04

Percutaneous coronary intervention with second-generation drug-eluting stent versus bare-metal stent: Systematic review and cost-benefit analysis.

PubMed

Poder, Thomas G; Erraji, Jihane; Coulibaly, Lucien P; Koffi, Kouamé

2017-01-01

Drug-eluting stents (DESs) were considered as ground-breaking technology promising to eradicate restenosis and the necessity to perform multiple revascularization procedures subsequent to percutaneous coronary intervention. Soon after DESs were released on the market, however, there were reports of a potential increase in mortality and of early or late thrombosis. In addition, DESs are far more expensive than bare-metal stents (BMSs), which has led to their limited use in many countries. The technology has improved over the last few years with the second generation of DESs (DES-2). Moreover, costs have come down and an improved safety profile with decreased thrombosis has been reported. Perform a cost-benefit analysis of DES-2s versus BMSs in the context of a publicly funded university hospital in Quebec, Canada. A systematic review of meta-analyses was conducted between 2012 and 2016 to extract data on clinical effectiveness. The clinical outcome of interest for the cost-benefit analysis was target-vessel revascularization (TVR). Cost units are those used in the Quebec health-care system. The cost-benefit analysis was based on a 2-year perspective. Deterministic and stochastic models (discrete-event simulation) were used, and various risk factors of reintervention were considered. DES-2s are much more effective than BMSs with respect to TVR rate ratio (i.e., 0.29 to 0.62 in more recent meta-analyses). DES-2s seem to cause fewer deaths and in-stent thrombosis than BMSs, but results are rarely significant, with the exception of the cobalt-chromium everolimus DES. The rate ratio of myocardial infraction is systematically in favor of DES-2s and very often significant. Despite the higher cost of DES-2s, fewer reinterventions can lead to huge savings (i.e., -$479 to -$769 per patient). Moreover, the higher a patient's risk of reintervention, the higher the savings associated with the use of DES-2s. Despite the higher purchase cost of DES-2s compared to BMSs, generalizing their use, in particular for patients at high risk of reintervention, should enable significant savings.

Percutaneous coronary intervention with second-generation drug-eluting stent versus bare-metal stent: Systematic review and cost–benefit analysis

PubMed Central

Erraji, Jihane; Coulibaly, Lucien P.; Koffi, Kouamé

2017-01-01

Background Drug-eluting stents (DESs) were considered as ground-breaking technology promising to eradicate restenosis and the necessity to perform multiple revascularization procedures subsequent to percutaneous coronary intervention. Soon after DESs were released on the market, however, there were reports of a potential increase in mortality and of early or late thrombosis. In addition, DESs are far more expensive than bare-metal stents (BMSs), which has led to their limited use in many countries. The technology has improved over the last few years with the second generation of DESs (DES-2). Moreover, costs have come down and an improved safety profile with decreased thrombosis has been reported. Objective Perform a cost–benefit analysis of DES-2s versus BMSs in the context of a publicly funded university hospital in Quebec, Canada. Methods A systematic review of meta-analyses was conducted between 2012 and 2016 to extract data on clinical effectiveness. The clinical outcome of interest for the cost–benefit analysis was target-vessel revascularization (TVR). Cost units are those used in the Quebec health-care system. The cost–benefit analysis was based on a 2-year perspective. Deterministic and stochastic models (discrete-event simulation) were used, and various risk factors of reintervention were considered. Results DES-2s are much more effective than BMSs with respect to TVR rate ratio (i.e., 0.29 to 0.62 in more recent meta-analyses). DES-2s seem to cause fewer deaths and in-stent thrombosis than BMSs, but results are rarely significant, with the exception of the cobalt–chromium everolimus DES. The rate ratio of myocardial infraction is systematically in favor of DES-2s and very often significant. Despite the higher cost of DES-2s, fewer reinterventions can lead to huge savings (i.e., -$479 to -$769 per patient). Moreover, the higher a patient’s risk of reintervention, the higher the savings associated with the use of DES-2s. Conclusion Despite the higher purchase cost of DES-2s compared to BMSs, generalizing their use, in particular for patients at high risk of reintervention, should enable significant savings. PMID:28498849

Flood risk assessment in France: comparison of extreme flood estimation methods (EXTRAFLO project, Task 7)

NASA Astrophysics Data System (ADS)

Garavaglia, F.; Paquet, E.; Lang, M.; Renard, B.; Arnaud, P.; Aubert, Y.; Carre, J.

2013-12-01

In flood risk assessment the methods can be divided in two families: deterministic methods and probabilistic methods. In the French hydrologic community the probabilistic methods are historically preferred to the deterministic ones. Presently a French research project named EXTRAFLO (RiskNat Program of the French National Research Agency, https://extraflo.cemagref.fr) deals with the design values for extreme rainfall and floods. The object of this project is to carry out a comparison of the main methods used in France for estimating extreme values of rainfall and floods, to obtain a better grasp of their respective fields of application. In this framework we present the results of Task 7 of EXTRAFLO project. Focusing on French watersheds, we compare the main extreme flood estimation methods used in French background: (i) standard flood frequency analysis (Gumbel and GEV distribution), (ii) regional flood frequency analysis (regional Gumbel and GEV distribution), (iii) local and regional flood frequency analysis improved by historical information (Naulet et al., 2005), (iv) simplify probabilistic method based on rainfall information (i.e. Gradex method (CFGB, 1994), Agregee method (Margoum, 1992) and Speed method (Cayla, 1995)), (v) flood frequency analysis by continuous simulation approach and based on rainfall information (i.e. Schadex method (Paquet et al., 2013, Garavaglia et al., 2010), Shyreg method (Lavabre et al., 2003)) and (vi) multifractal approach. The main result of this comparative study is that probabilistic methods based on additional information (i.e. regional, historical and rainfall information) provide better estimations than the standard flood frequency analysis. Another interesting result is that, the differences between the various extreme flood quantile estimations of compared methods increase with return period, staying relatively moderate up to 100-years return levels. Results and discussions are here illustrated throughout with the example of five watersheds located in the South of France. References : O. CAYLA : Probability calculation of design floods abd inflows - SPEED. Waterpower 1995, San Francisco, California 1995 CFGB : Design flood determination by the gradex method. Bulletin du Comité Français des Grands Barrages News 96, 18th congress CIGB-ICOLD n2, nov:108, 1994. F. GARAVAGLIA et al. : Introducing a rainfall compound distribution model based on weather patterns subsampling. Hydrology and Earth System Sciences, 14, 951-964, 2010. J. LAVABRE et al. : SHYREG : une méthode pour l'estimation régionale des débits de crue. application aux régions méditerranéennes françaises. Ingénierie EAT, 97-111, 2003. M. MARGOUM : Estimation des crues rares et extrêmes : le modèle AGREGEE. Conceptions et remières validations. PhD, Ecole des Mines de Paris, 1992. R. NAULET et al. : Flood frequency analysis on the Ardèche river using French documentary sources from the two last centuries. Journal of Hydrology, 313:58-78, 2005. E. PAQUET et al. : The SCHADEX method: A semi-continuous rainfall-runoff simulation for extreme flood estimation, Journal of Hydrology, 495, 23-37, 2013.

Emotional communication in medical consultations with native and non-native patients applying two different methodological approaches.

PubMed

Kale, Emine; Skjeldestad, Kristin; Finset, Arnstein

2013-09-01

To explore the potential agreement between two different methods to investigate emotional communication of native and non-native patients in medical consultations. The data consisted of 12 videotaped hospital consultations with six native and six non-native patients. The consultations were coded according to coding rules of the Verona Coding definitions of Emotional Sequences (VR-CoDES) and afterwards analyzed by discourse analysis (DA) by two co-workers who were blind to the results from VR-CoDES. The agreement between VR-CoDES and DA was high in consultations with many cues and concerns, both with native and non-native patients. In consultations with no (or one cue) according to VR-CoDES criteria the DA still indicated the presence of emotionally salient expressions and themes. In some consultations cues to underlying emotions are communicated so vaguely or veiled by language barriers that standard VR-CoDES coding may miss subtle cues. Many of these sub-threshold cues could potentially be coded as cues according to VR-CoDES main coding categories, if criteria for coding vague or ambiguous cues had been better specified. Combining different analytical frameworks on the same dataset provide us new insights on emotional communication. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Goal setting with type 2 diabetes: a hermeneutic analysis of the experiences of diabetes educators.

PubMed

Fleming, Susan E; Boyd, Angela; Ballejos, Miriam; Kynast-Gales, Susan A; Malemute, Charlene L; Armstrong Shultz, Jill; Vandermause, Roxanne K

2013-01-01

The purpose of this study was to explicate and interpret common experiences of diabetes educators (DEs) with patient goal setting for patients with type 2 diabetes in diabetes education. Transcripts (n = 10) from semi-structured interviews were analyzed using a hermeneutic phenomenological approach to more deeply explore the accounts of DEs' goal setting with patients with type 2 diabetes. The overarching pattern that emerged was "Striking a Balance," which subsumed 4 subthemes: Applying Theoretical-Practical Principles When Setting Goals, Identifying Idealistic-Realistic Expectations, Creating Patient-Educator-Centered Plans, and Readying-Living With Goal Setting. The pattern, "Striking a Balance," revealed a common meaning of DEs as experiences requiring balance and nuance in goal setting with patients. The results of this study combined with the tenets of the self-determination theory can provide the DEs with real-life exemplars and a theoretical framework to encourage their patients to self-manage, increase intrinsic motivation, and improve adherence related to their lifestyle changes and glycemic control. DEs, as facilitators of change, can implement these changes with flexible and reciprocal activities with their patients. The DEs owned these activities and they are: "building the bond," "sharing the session," "readying for change," "sending them home," and "bringing them back."

Developing a Canadian Curriculum for Simulation-Based Education in Obstetrics and Gynaecology: A Delphi Study.

PubMed

Craig, Catherine; Posner, Glenn D

2017-09-01

As obstetrics and gynaecology (Ob/Gyn) residency training programs move towards a competence-based approach to training and assessment, the development of a national standardized simulation curriculum is essential. The primary goal of this study was to define the fundamental content for the Canadian Obstetrics and Gynecology Simulation curriculum. A modified Delphi technique was used to achieve consensus in three rounds by surveying residency program directors or their local simulation educator delegates in 16 accredited Canadian Ob/Gyn residency programs. A consensus rate of 80% was agreed upon. Survey results were collected over 11 months in 2016. Response rates for the Delphi were 50% for the first round, 81% for the second round, and 94% for the third round. The first survey resulted in 84 suggested topics. These were organized into four categories: obstetrics high acuity low frequency events, obstetrics common events, gynaecology high acuity low frequency events, and gynaecology common events. Using the modified Delphi method, consensus was reached on 6 scenarios. This study identified the content for a national simulation-based curriculum for Ob/Gyn residency training programs and is the first step in the development of this curriculum. Copyright © 2017 The Society of Obstetricians and Gynaecologists of Canada/La Société des obstétriciens et gynécologues du Canada. Published by Elsevier Inc. All rights reserved.

Computational Simulations of Convergent Nozzles for the AIAA 1st Propulsion Aerodynamics Workshop

NASA Technical Reports Server (NTRS)

Dippold, Vance F., III

2014-01-01

Computational Fluid Dynamics (CFD) simulations were completed for a series of convergent nozzles in participation of the American Institute of Aeronautics and Astronautics (AIAA) 1st Propulsion Aerodynamics Workshop. The simulations were performed using the Wind-US flow solver. Discharge and thrust coefficients were computed for four axisymmetric nozzles with nozzle pressure ratios (NPR) ranging from 1.4 to 7.0. The computed discharge coefficients showed excellent agreement with available experimental data; the computed thrust coefficients captured trends observed in the experimental data, but over-predicted the thrust coefficient by 0.25 to 1.0 percent. Sonic lines were computed for cases with NPR >= 2.0 and agreed well with experimental data for NPR >= 2.5. Simulations were also performed for a 25 deg. conic nozzle bifurcated by a flat plate at NPR = 4.0. The jet plume shock structure was compared with and without the splitter plate to the experimental data. The Wind-US simulations predicted the shock structure well, though lack of grid resolution in the plume reduced the sharpness of the shock waves. Unsteady Reynolds-Averaged Navier-Stokes (URANS) simulations and Detached Eddy Simulations (DES) were performed at NPR = 1.6 for the 25 deg conic nozzle with splitter plate. The simulations predicted vortex shedding from the trailing edge of the splitter plate. However, the vortices of URANS and DES solutions appeared to dissipate earlier than observed experimentally. It is believed that a lack of grid resolution in the region of the vortex shedding may have caused the vortices to break down too soon

Correction partielle des Effets de la Turbulence atmosphérique en Interférométrie optique: Traitement des Données et Développement d'Optiques adaptatives pour l'Interféromètre GI2T

NASA Astrophysics Data System (ADS)

Vérinaud, Christophe

2000-11-01

Dans le domaine de la haute résolution angulaire en astronomie, les techniques de l'interférométrie optique et de l'optique adaptative sont en plein essor. La principale limitation de l'interférométrie est laturbulence atmosphérique qui entraîne des pertes de cohérence importantes, préjudiciables à la sensibilité et à la précision des mesures. L'optique adaptative appliquée à l'interférométrie va permettre un gain en sensibilité considérable. Le but de cette thèse est l'étude de l'influence de l'optique adaptative sur les mesures interférométriques et son application au Grand Interféromètre à DeuxTélescopes (GI2T) situé sur le Mont Calern dans le sud de la France. Deux problèmes principaux sont étudiés de manière théorique par des développements analytiques et des simulations numériques: le premier est le contrôle en temps réel de la variation des différences de marche optique, encore appelée piston différentiel, induite par l'optique adaptative ; le deuxième problème important est la calibration des mesures de contraste des franges dans le cas de la correction partielle. Je limite mon étude au cas d'un interféromètre multi-modes en courtes poses, mode de fonctionnement principal du GI2T également prévu sur le Very Large Telescope Interferometer installé au Cerro Paranal au Chili. Je développe une méthode de calibration des pertes de cohérence spatio-temporelles connaissant la fonction de structure des fronts d'onde corrigés. Je montre en particulier qu'il est possible d'estimer fréquence par fréquence la densité spectrale des images en courtes poses, méthode très utile pour augmenter la couverture du plan des fréquences spatiales dans l'observation d'objets étendus. La dernière partie de ce mémoire est consacrée au développements instrumentaux auxquels j'ai participé. J'ai développé un banc de qualification du système d'optique adaptative à courbure destiné au GI2T et j'ai étudié l'implantation optique de deux systèmes dans la table de recombinaison.

Redshift distributions of galaxies in the Dark Energy Survey Science Verification shear catalogue and implications for weak lensing

DOE PAGES

Bonnett, C.; Troxel, M. A.; Hartley, W.; ...

2016-08-30

Here we present photometric redshift estimates for galaxies used in the weak lensing analysis of the Dark Energy Survey Science Verification (DES SV) data. Four model- or machine learning-based photometric redshift methods—annz2, bpz calibrated against BCC-Ufig simulations, skynet, and tpz—are analyzed. For training, calibration, and testing of these methods, we construct a catalogue of spectroscopically confirmed galaxies matched against DES SV data. The performance of the methods is evaluated against the matched spectroscopic catalogue, focusing on metrics relevant for weak lensing analyses, with additional validation against COSMOS photo-z’s. From the galaxies in the DES SV shear catalogue, which have meanmore » redshift 0.72±0.01 over the range 0.38 of approximately 3%. This shift is within the one sigma statistical errors on σ8 for the DES SV shear catalogue. We further study the potential impact of systematic differences on the critical surface density, Σ crit, finding levels of bias safely less than the statistical power of DES SV data. In conclusion, we recommend a final Gaussian prior for the photo-z bias in the mean of n(z) of width 0.05 for each of the three tomographic bins, and show that this is a sufficient bias model for the corresponding cosmology analysis.« less

Development of Dielectric Elastomer Nanocomposites as Stretchable and Flexible Actuating Materials

NASA Astrophysics Data System (ADS)

Wang, Yu

Dielectric elastomers (DEs) are a new type of smart materials showing promising functionalities as energy harvesting materials as well as actuating materials for potential applications such as artificial muscles, implanted medical devices, robotics, loud speakers, micro-electro-mechanical systems (MEMS), tunable optics, transducers, sensors, and even generators due to their high electromechanical efficiency, stability, lightweight, low cost, and easy processing. Despite the advantages of DEs, technical challenges must be resolved for wider applications. A high electric field of at least 10-30 V/um is required for the actuation of DEs, which limits the practical applications especially in biomedical fields. We tackle this problem by introducing the multiwalled carbon nanotubes (MWNTs) in DEs to enhance their relative permittivity and to generate their high electromechanical responses with lower applied field level. This work presents the dielectric, mechanical and electromechanical properties of DEs filled with MWNTs. The micromechanics-based finite element models are employed to describe the dielectric, and mechanical behavior of the MWNT-filled DE nanocomposites. A sufficient number of models are computed to reach the acceptable prediction of the dielectric and mechanical responses. In addition, experimental results are analyzed along with simulation results. Finally, laser Doppler vibrometer is utilized to directly detect the enhancement of the actuation strains of DE nanocomposites filled with MWNTs. All the results demonstrate the effective improvement in the electromechanical properties of DE nanocomposites filled with MWNTs under the applied electric fields.

The Search for RR Lyrae Variables in the Dark Energy Survey

NASA Astrophysics Data System (ADS)

Nielsen, Chandler; Marshall, Jennifer L.; Long, James

2017-01-01

RR Lyrae variables are stars with a characteristic relationship between magnitude and phase and whose distances can be easily determined, making them extremely valuable in mapping and analyzing galactic substructure. We present our method of searching for RR Lyrae variable stars using data extracted from the Dark Energy Survey (DES). The DES probes for stars as faint as i = 24.3. Finding such distant RR Lyrae allows for the discovery of objects such as dwarf spheroidal tidal streams and dwarf galaxies; in fact, at least one RR Lyrae has been discovered in each of the probed dwarf spheroidal galaxies orbiting the Milky Way (Baker & Willman 2015). In turn, these discoveries may ultimately resolve the well-known missing satellite problem, in which theoretical simulations predict many more dwarf satellites than are observed in the local Universe. Using the Lomb-Scargle periodogram to determine the period of the star being analyzed, we could display the relationship between magnitude and phase and visually determine if the star being analyzed was an RR Lyrae. We began the search in frequently observed regions of the DES footprint, known as the supernova fields. We then moved our search to known dwarf galaxies found during the second year of the DES. Unfortunately, we did not discover RR Lyrae in the probed dwarf galaxies; this method should be tried again once more observations are taken in the DES.

Redshift distributions of galaxies in the Dark Energy Survey Science Verification shear catalogue and implications for weak lensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnett, C.; Troxel, M. A.; Hartley, W.

Here we present photometric redshift estimates for galaxies used in the weak lensing analysis of the Dark Energy Survey Science Verification (DES SV) data. Four model- or machine learning-based photometric redshift methods—annz2, bpz calibrated against BCC-Ufig simulations, skynet, and tpz—are analyzed. For training, calibration, and testing of these methods, we construct a catalogue of spectroscopically confirmed galaxies matched against DES SV data. The performance of the methods is evaluated against the matched spectroscopic catalogue, focusing on metrics relevant for weak lensing analyses, with additional validation against COSMOS photo-z’s. From the galaxies in the DES SV shear catalogue, which have meanmore » redshift 0.72±0.01 over the range 0.38 of approximately 3%. This shift is within the one sigma statistical errors on σ8 for the DES SV shear catalogue. We further study the potential impact of systematic differences on the critical surface density, Σ crit, finding levels of bias safely less than the statistical power of DES SV data. In conclusion, we recommend a final Gaussian prior for the photo-z bias in the mean of n(z) of width 0.05 for each of the three tomographic bins, and show that this is a sufficient bias model for the corresponding cosmology analysis.« less

Comparison of Timed Automata with Discrete Event Simulation for Modeling of Biomarker-Based Treatment Decisions: An Illustration for Metastatic Castration-Resistant Prostate Cancer.

PubMed

Degeling, Koen; Schivo, Stefano; Mehra, Niven; Koffijberg, Hendrik; Langerak, Rom; de Bono, Johann S; IJzerman, Maarten J

2017-12-01

With the advent of personalized medicine, the field of health economic modeling is being challenged and the use of patient-level dynamic modeling techniques might be required. To illustrate the usability of two such techniques, timed automata (TA) and discrete event simulation (DES), for modeling personalized treatment decisions. An early health technology assessment on the use of circulating tumor cells, compared with prostate-specific antigen and bone scintigraphy, to inform treatment decisions in metastatic castration-resistant prostate cancer was performed. Both modeling techniques were assessed quantitatively, in terms of intermediate outcomes (e.g., overtreatment) and health economic outcomes (e.g., net monetary benefit). Qualitatively, among others, model structure, agent interactions, data management (i.e., importing and exporting data), and model transparency were assessed. Both models yielded realistic and similar intermediate and health economic outcomes. Overtreatment was reduced by 6.99 and 7.02 weeks by applying circulating tumor cell as a response marker at a net monetary benefit of -€1033 and -€1104 for the TA model and the DES model, respectively. Software-specific differences were observed regarding data management features and the support for statistical distributions, which were considered better for the DES software. Regarding method-specific differences, interactions were modeled more straightforward using TA, benefiting from its compositional model structure. Both techniques prove suitable for modeling personalized treatment decisions, although DES would be preferred given the current software-specific limitations of TA. When these limitations are resolved, TA would be an interesting modeling alternative if interactions are key or its compositional structure is useful to manage multi-agent complex problems. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Cost-effectiveness analysis of 30-month vs 12-month dual antiplatelet therapy with clopidogrel and aspirin after drug-eluting stents in patients with acute coronary syndrome.

PubMed

Jiang, Minghuan; You, Joyce H S

2017-10-01

Continuation of dual antiplatelet therapy (DAPT) beyond 1 year reduces late stent thrombosis and ischemic events after drug-eluting stents (DES) but increases risk of bleeding. We hypothesized that extending DAPT from 12 months to 30 months in patients with acute coronary syndrome (ACS) after DES is cost-effective. A lifelong decision-analytic model was designed to simulate 2 antiplatelet strategies in event-free ACS patients who had completed 12-month DAPT after DES: aspirin monotherapy (75-162 mg daily) and continuation of DAPT (clopidogrel 75 mg daily plus aspirin 75-162 mg daily) for 18 months. Clinical event rates, direct medical costs, and quality-adjusted life-years (QALYs) gained were the primary outcomes from the US healthcare provider perspective. Base-case results showed DAPT continuation gained higher QALYs (8.1769 vs 8.1582 QALYs) at lower cost (USD42 982 vs USD44 063). One-way sensitivity analysis found that base-case QALYs were sensitive to odds ratio (OR) of cardiovascular death with DAPT continuation and base-case cost was sensitive to OR of nonfatal stroke with DAPT continuation. DAPT continuation remained cost-effective when the ORs of nonfatal stroke and cardiovascular death were below 1.241 and 1.188, respectively. In probabilistic sensitivity analysis, DAPT continuation was the preferred strategy in 74.75% of 10 000 Monte Carlo simulations at willingness-to-pay threshold of 50 000 USD/QALYs. Continuation of DAPT appears to be cost-effective in ACS patients who were event-free for 12-month DAPT after DES. The cost-effectiveness of DAPT for 30 months was highly subject to the OR of nonfatal stroke and OR of death with DAPT continuation. © 2017 Wiley Periodicals, Inc.

Evaluation of balloon withdrawal forces with bare-metal stents, compared with Taxus and Cypher drug-eluting coronary stents: balloon, stent and polymer interactions.

PubMed

Turk, Marvee; Gupta, Vishal; Fischell, Tim A

2010-03-01

There have been reports of serious complications related to difficulty removing the deflated Taxus stent delivery balloon after stent deployment. The purpose of this study was to determine whether the Taxus SIBS polymer was "sticky" and associated with an increase in the force required to remove the stent delivery balloon after stent deployment, using a quantitative, ex-vivo model. Balloon-polymer-stent interactions during balloon withdrawal were measured with the Taxus Liberté, Liberté bare-metal stent (BMS; no polymer = control), the Cordis Cypher drug-eluting stent (DES; PEVA/PBMA polymer) and the BX Velocity (no polymer). We quantitatively measured the force required to remove the deflated stent delivery balloon from each of these stents in simulated vessels at 37 degrees C in a water bath. Balloon withdrawal forces were measured in straight (0 degree curve), mildly curved (20 degree curve) and moderately curved (40 degree curve) simulated vessel segments. The average peak force required to remove the deflated balloon catheter from the Taxus Liberté DES, the Liberté BMS, the Cypher DES, and the Bx Velocity BMS were similar in straight segments, but were much greater for the Taxus Liberté in the moderately curved segments (1.4 lbs vs. 0.11 lbs, 0.11 lbs and 0.12 lbs, respectively; p < 0.0001). The SIBS polymer of the Taxus Liberté DES appears to be "sticky" and is associated with high forces required to withdraw the deflated balloon from the deployed stent in curved segments. This withdrawal issue may help to explain the clinical complications that have been reported with this device.

Prevalence of dry eye syndrome after a three-year exposure to a clean room.

PubMed

Cho, Hyun A; Cheon, Jae Jung; Lee, Jong Seok; Kim, Soo Young; Chang, Seong Sil

2014-01-01

To measure the prevalence of dry eye syndrome (DES) among clean room (relative humidity ≤1%) workers from 2011 to 2013. Three annual DES examinations were performed completely in 352 clean room workers aged 20-40 years who were working at a secondary battery factory. Each examination comprised the tear-film break-up test (TFBUT), Schirmer's test I, slit-lamp microscopic examination, and McMonnies questionnaire. DES grades were measured using the Delphi approach. The annual examination results were analyzed using a general linear model and post-hoc analysis with repeated-ANOVA (Tukey). Multiple logistic regression was performed using the examination results from 2013 (dependent variable) to analyze the effect of years spent working in the clean room (independent variable). The prevalence of DES among these workers was 14.8% in 2011, 27.1% in 2012, and 32.8% in 2013. The TFBUT and McMonnies questionnaire showed that DES grades worsened over time. Multiple logistic regression analysis indicated that the odds ratio for having dry eyes was 1.130 (95% CI 1.012-1.262) according to the findings of the McMonnies questionnaire. This 3-year trend suggests that the increased prevalence of DES was associated with longer working hours. To decrease the prevalence of DES, employees should be assigned reasonable working hours with shift assignments that include appropriate break times. Workers should also wear protective eyewear, subdivide their working process to minimize exposure, and utilize preservative-free eye drops.

Semi-relativistic quark-antiquark potential models

NASA Astrophysics Data System (ADS)

Basdevant, J. L.; Boukraa, S.

We study the qualitative and quantitative properties of the spectrum of a two-body hamiltonian with relativistic kinematics. We show that this kinematics leads in a natural way to the observed features of light flavour (u, d, s) spectroscopy. After having established the basic properties of the operator √ p2 + m2 + V(r) in the cases of linear or logarithmic potentials, we show that, to first approximation, all q1 q2 meson states can be reproduced with a very simple universal flavour-independent potential whose parameters are directly related to basic physical quantities : the Regge slopes of light flavours and the quasi-logarithmic coupling strength of heavy quarks. We can derive equivalent effective non-relativistic hamiltonians which justify the successes of NR approaches. The main difficulties encountered, in particular in incorporating spin effects, appear to be due to the fact that, in phenomenological potential models, chiral symmetry and the ensuing Goldstone nature of the pion cannot be implemented in a natural way. Hence, such an approach can take its full predictive power only if it is based on a deeper field-theoretic level. Devant le succès spectaculaire des modèles potentiels pour la spectroscopie des états formés de quarks lourds (cc, bb, etc.), il est tentant d'essayer d'étendre de tels modèles aux états comprenant des quarks légers, u, d et s. En particulier, la spectroscopie des états mésoniques « lourds » est phénoménologiquement dominée par l'existence d'un potentiel confinant universel, quasi logarithmique entre 0,1 fm et 1 fm, tandis que celle des états légers se décrit de façon simple par des trajectoires de Regge linéaires qui ont une pente universelle. 11 est donc légitime de se demander s'il s'agit là de deux secteurs disjoints du monde hadronique, ou bien s'il existe une certaine unité dans la spectroscopie mésonique au plan phénoménologique. Cependant, en présence de quarks légers, voire de masse nulle, les modèles non relativistes traditionnellement utilisés sont sujets à des critiques évidentes. 11 est donc naturel de mettre à l'épreuve des modèles semi-relativistes, c'est-à-dire des hamiltoniens à cinématique relativiste, qui constituent l'extension la plus simple des modèles non relativistes. Nous étudions ici les propriétés qualitatives et quantitatives des spectres d'hamiltoniens de ce type. Nous montrons que l'usage de la cinématique relativiste rend compte de façon naturelle des caractéristiques principales de la spectroscopie des saveurs légères (u, d, s). Après avoir établi les propriétés essentielles de l'opérateur (p2 + m2)1/2 + V(r) dans le cas du potentiel linéaire et du potentiel logarithmique, nous montrons qu'en première approximation tous les états q1 q2 peuvent être obtenus avec un potentiel universel, indépendant de la saveur, extrêmement simple. Les paramètres de ce potentiel sont directement reliés à des grandeurs physiques de base : la pente universelle des trajectoires de Regge des états légers d'une part, la constante de couplage du potentiel logarithmique des états lourds de l'autre. Nous obtenons des hamiltoniens effectifs non relativistes équivalents qui justifient en un certain sens le succès des approches non relativistes. Les principales difficultés que l'on rencontre, en particulier lorsqu'on tente d'incorporer les corrections de structure fine et hyperfine, semblent provenir de ce que la symétrie chirale, et sa conséquence que le méson soit pratiquement un boson de Goldstone, ne peut être incorporée de façon simple et naturelle dans un modèle hamiltonien. En conséquence, une pareille approche ne peut prendre sa pleine puissance prédictive (avec un nombre restreint de paramètres) que si elle est fondée sur des bases plus profondes déduites d'une théorie des champs.

Simulation of groundwater drainage into a tunnel in fractured rock and numerical analysis of leakage remediation, Romeriksporten tunnel, Norway

NASA Astrophysics Data System (ADS)

Kitterød, N.-O.; Colleuille, H.; Wong, W. K.; Pedersen, T. S.

2000-09-01

Standard geostatistical methods for simulation of heterogeneity were applied to the Romeriksporten tunnel in Norway, where water was leaking through high-permeable fracture zones into the tunnel while it was under construction, causing drainage problems on the surface. After the tunnel was completed, artificial infiltration of water into wells drilled from the tunnel was implemented to control the leakage. Synthetic heterogeneity was generated at a scale sufficiently small to simulate the effects of remedial actions that were proposed to control the leakage. The flow field depends on the variance of permeabilities and the covariance model used to generate the heterogeneity. Flow channeling is the most important flow mechanism if the variance of the permeability field is large compared to the expected value. This condition makes the tunnel leakage difficult to control. The main effects of permeability changes due to sealing injection are simulated by a simple perturbation of the log-normal probability density function of the permeability. If flow channeling is the major transport mechanism of water into the tunnel, implementation of artificial infiltration of water to control the leakage requires previous chemical-sealing injection to be successful. Résumé. Des méthodes géostatistiques standard ont été employées pour simuler l'hétérogénéité des zones de fractures à fortes perméabilitées dans lesquelles, au cours de la construction du tunnel ferroviaire de Romeriksporten (Norvège), l'eau s'est écoulée, causant des problèmes de drainage en surface. Quand les travaux ont été terminés, l'injection d'eau dans des puits forés à partir du tunnel a été réalisée pour contrôler ces infiltrations. Une hétérogénéité synthétique a été créée à une échelle suffisamment petite pour simuler les effets de l'injection d'eau. Le champ des écoulements dépend de la variance des perméabilités et de la covariance du modèle utilisé pour générer l'hétérogénéité. La chenalisation de l'écoulement est le mécanisme d'écoulement le plus important si la variance du champ de perméabilité est grande par rapport à la valeur moyenne. Cette condition fait que les infiltrations dans le tunnel sont difficiles à contrôler. L'étanchéification du tunnel par des produits chimiques est simulé par une simple perturbation de la fonction de densité de probabilité log-normale de la perméabilité. Si la chenalisation de l'écoulement est le principal mécanisme de transport d'eau entrant dans le tunnel, la création d'une injection artificielle de l'eau pour contrôler l'infiltration dans le tunnel impose, pour réussir, une imperméabilisation préalable par des produits chimiques. Resumen. Se han aplicado métodos estadísticos convencionales para la simulación de la heterogeneidad en el túnel de Roeriksporte (Noruega), donde la presencia de agua en zonas fracturadas de alta permeabilidad originó problemas de drenaje en superficie durante su construcción. Una vez finalizado el túnel, para controlar la infiltración se inyectó agua en los pozos situados en su interior. La generación del campo heterogéneo se realizó a una escala lo suficientemente pequeña que permitiera simular los efectos de las medidas de control propuestas. El campo de flujo depende de la varianza de las permeabilidades y del modelo de covarianza utilizado para generar la heterogeneidad. El flujo a través de canales es el mecanismo dominante si la varianza del campo de permeabilidad es grande en relación con el valor esperado. Este hecho condiciona que las filtraciones en el túnel sean difíciles de controlar. Los principales efectos de los cambios de permeabilidad originados por las inyecciones para el sellado del túnel se simularon mediante una simple perturbación de la función de densidad de probabilidad lognormal de la permeabilidad. Si el flujo a través de canales es el principal mecanismo de la presencia de agua en el túnel, el control de las filtraciones mediante técnicas de inyección de agua en pozos de recarga requiere de la inyección previa de un producto químico para el sellado de las fisuras.

CALIBRATED ULTRA FAST IMAGE SIMULATIONS FOR THE DARK ENERGY SURVEY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bruderer, Claudio; Chang, Chihway; Refregier, Alexandre

2016-01-20

Image simulations are becoming increasingly important in understanding the measurement process of the shapes of galaxies for weak lensing and the associated systematic effects. For this purpose we present the first implementation of the Monte Carlo Control Loops (MCCL), a coherent framework for studying systematic effects in weak lensing. It allows us to model and calibrate the shear measurement process using image simulations from the Ultra Fast Image Generator (UFig) and the image analysis software SExtractor. We apply this framework to a subset of the data taken during the Science Verification period (SV) of the Dark Energy Survey (DES). Wemore » calibrate the UFig simulations to be statistically consistent with one of the SV images, which covers ∼0.5 square degrees. We then perform tolerance analyses by perturbing six simulation parameters and study their impact on the shear measurement at the one-point level. This allows us to determine the relative importance of different parameters. For spatially constant systematic errors and point-spread function, the calibration of the simulation reaches the weak lensing precision needed for the DES SV survey area. Furthermore, we find a sensitivity of the shear measurement to the intrinsic ellipticity distribution, and an interplay between the magnitude-size and the pixel value diagnostics in constraining the noise model. This work is the first application of the MCCL framework to data and shows how it can be used to methodically study the impact of systematics on the cosmic shear measurement.« less

Risk Assessment of Anthrax Threat Letters

DTIC Science & Technology

2001-09-01

extent of the hazard. In the experiments, envelopes containing Bacillus globigii spores (a simulant for anthrax) were opened in a mock mail room/office...des spores de Bacillus globigii (une bactérie imitant l’agent de l’anthrax) ont été ouvertes dans un endroit simulant une salle de courrier ou un...provide guidance to first responders and other government departments. In this study (non-pathogenic) Bacillus globigii (BG) spore contaminated

Revetements antireflet-passivation a base de nitrure de silicium PECVD pour cellules solaires triple-jonction III-V/ Ge

NASA Astrophysics Data System (ADS)

Homier, Ram

Dans le contexte environnemental actuel, le photovoltaïque bénéficie de l'augmentation des efforts de recherche dans le domaine des énergies renouvelables. Pour réduire le coût de la production d'électricité par conversion directe de l'énergie lumineuse en électricité, le photovoltaïque concentré est intéressant. Le principe est de concentrer une grande quantité d'énergie lumineuse sur des petites surfaces de cellules solaires multi-jonction à haute efficacité. Lors de la fabrication d'une cellule solaire, il est essentiel d'inclure une méthode pour réduire la réflexion de la lumière à la surface du dispositif. Le design d'un revêtement antireflet (ARC) pour cellules solaires multi-jonction présente des défis à cause de la large bande d'absorption et du besoin d'égaliser le courant produit par chaque sous-cellule. Le nitrure de silicium déposé par PECVD en utilisant des conditions standards est largement utilisé dans l'industrie des cellules solaires à base de silicium. Cependant, ce diélectrique présente de l'absorption dans la plage des courtes longueurs d'onde. Nous proposons l'utilisation du nitrure de silicium déposé par PECVD basse fréquence (LFSiN) optimisé pour avoir un haut indice de réfraction et une faible absorption optique pour l'ARC pour cellules solaires triple-jonction III-V/Ge. Ce matériau peut aussi servir de couche de passivation/encapsulation. Les simulations montrent que l'ARC double couche SiO2/LFSiN peut être très efficace pour réduire les pertes par réflexion dans la plage de longueurs d'onde de la sous-cellule limitante autant pour des cellules solaires triple-jonction limitées par la sous-cellule du haut que pour celles limitées par la sous-cellule du milieu. Nous démontrons aussi que la performance de la structure est robuste par rapport aux fluctuations des paramètres des couches PECVD (épaisseurs, indice de réfraction). Mots-clés : Photovoltaïque concentré (CPV), cellules solaires multi-jonction (MJSC), revêtement antireflet (ARC), passivation des semiconducteurs III-V, nitrure de silicium (Si"Ny), PECVD.

Development of an E-Prime Based Computer Simulation of an Interactive Human Rights Violation Negotiation Script (Developpement d’un Programme de Simulation par Ordinateur Fonde sur le Logiciel E Prime pour la Negociation Interactive en cas de Violation des Droits de la Personne)

DTIC Science & Technology

2010-12-01

Base ( CFB ) Kingston. The computer simulation developed in this project is intended to be used for future research and as a possible training platform...DRDC Toronto No. CR 2010-055 Development of an E-Prime based computer simulation of an interactive Human Rights Violation negotiation script...Abstract This report describes the method of developing an E-Prime computer simulation of an interactive Human Rights Violation (HRV) negotiation. An

Geostatistical mapping of leakance in a regional aquitard, Oak Ridges Moraine area, Ontario, Canada

NASA Astrophysics Data System (ADS)

Desbarats, A. J.; Hinton, M. J.; Logan, C. E.; Sharpe, D. R.

2001-01-01

The Newmarket Till forms a regionally extensive aquitard separating two major aquifer systems in the Greater Toronto area, Canada. The till is incised, and sometimes eroded entirely, by a network of sand- and gravel-filled channels forming productive aquifers and, locally, high-conductivity windows between aquifer systems. Leakage through the till may also be substantial in places. This study investigates the spatial variability of aquitard leakance in order to assess the relative importance of recharge processes to the lower aquifers. With a large database derived from water-well records and containing both hard and soft information, the Sequential Indicator Simulation method is used to generate maps of aquitard thickness and window probability. These can be used for targeting channel aquifers and for identifying potential areas of recharge to the lower aquifers. Conductivities are modeled from sparse data assuming that their correlation range is much smaller than the grid spacing. Block-scale leakances are obtained by upscaling nodal values based on simulated conductivity and thickness fields. Under the "aquifer-flow'' assumption, upscaling is performed by arithmetic spatial averaging. Histograms and maps of upscaled leakances show that heterogeneities associated with aquitard windows have the largest effect on regional groundwater flow patterns. Résumé. La moraine glaciaire de Newmarket constitue un imperméable d'extension régionale séparant deux systèmes aquifères dans la région du Grand Toronto (Canada). La moraine est entaillée, et parfois entièrement érodée, par un réseau de chenaux comblés de sables et de graviers formant des aquifères productifs et, localement, des «fenêtres», zones à forte conductivité hydraulique reliant les systèmes aquifères. Une drainance au travers de la moraine peut également être significative par endroits. Cette étude s'intéresse à la variabilité spatiale de la drainance au travers de l'imperméable, dans le but d'évaluer l'importance relative des processus d'alimentation des aquifères inférieurs. À partir d'une vaste base de données constituée par les mesures faites dans les puits et contenant des informations à la fois certaines et incertaines, la méthode de simulation par indicateur séquentiel est utilisée pour créer des cartes d'épaisseur de l'imperméable et de probabilité d'existence des fenêtres. Ces cartes peuvent être utilisées pour mettre en évidence les aquifères de chenaux et pour identifier les zones potentielles de recharge des aquifères inférieurs. Les conductivités hydrauliques sont modélisées à partir de données clairsemées en supposant que leur gamme de corrélation est beaucoup plus faible que le pas de la grille. La drainance à l'échelle des blocs est obtenue par accroissement du niveau d'échelle des valeurs nodales basé sur les champs de conductivité simulée et des épaisseurs. À partir de l'hypothèse d'écoulement dans l'aquifère, l'accroissement d'échelle est réalisé en faisant une moyenne arithmétique spatiale. Des histogrammes et des cartes de drainance avec accroissement d'échelle montrent que les hétérogénéités associées aux fenêtres dans l'imperméable constituent l'effet le plus important dans l'organisation des écoulements souterrains régionaux. Resumen. El Till de Newmarket forma un acuitardo de extensión regional que separa dos sistemas acuíferos principales en la zona de Greater Toronto (Canadá). El till está horadado, y a veces completamente erosionado, por una red de canales rellenos de arena y grava. Estos constituyen acuíferos productivos y, localmente, conexiones de alta permeabilidad entre sistemas acuíferos. El goteo a través del till puede ser fundamental en ciertos lugares. Este estudio investiga la variabilidad espacial del goteo desde el acuitardo con el fin de establecer la importancia relativa de los procesos de recarga hacia los acuíferos inferiores. Se ha utilizado el método de la Simulación Indicadora Secuencial, soportado por una gran base de datos que contiene registros de sondeos e incluye información blanda y dura, para generar mapas de espesor del acuitardo y mapas de probabilidad de discontinuidades laterales en el acuitardo. Estos resultados se pueden emplear para identificar canales y las zonas de recarga potencial a los acuíferos inferiores. Se han modelado las conductividades a partir de datos dispersos, suponiendo que la distancia de correlación es mucho menor que el espaciado de la malla. Se han calculado valores de goteo a escala de bloque por medio del escalado de los valores nodales, basándose en los campos simulados de conductividad y espesor. El escalado se calcula mediante un promedio aritmético espacial, bajo la hipótesis de "flujo en el acuífero". Los histogramas y mapas de goteos escalados muestran que las heterogeneidades asociadas a las discontinuidades en el acuitardo producen el efecto más notable en la distribución regional del flujo de aguas subterráneas.

Development of a sharp interface model that simulates coastal aquifer flow with the coupled use of GIS

NASA Astrophysics Data System (ADS)

Gemitzi, Alexandra; Tolikas, Demetrios

A simulation program, which works seamlessly with GIS and simulates flows in coastal aquifers, is presented in the present paper. The model is based on the Galerkin finite element discretization scheme and it simulates both steady and transient freshwater and saltwater flow, assuming that the two fluids are separated by a sharp interface. The model has been verified in simple cases where analytical solutions exist. The simulation program works as a tool of the GIS program, which is the main database that stores and manages all the necessary data. The combined use of the simulation and the GIS program forms an integrated management tool offering a simpler way of simulating and studying saline intrusion in coastal aquifers. Application of the model to the Yermasogia aquifer illustrates the coupled use of modeling and GIS techniques for the examination of regional coastal aquifer systems. Pour étudier un système aquifère côtier, nous avons développé un modèle aux éléments finis en quasi 3-D qui simule les écoulements d'eau douce et d'eau salée en régime aussi bien permanent que transitoire. Les équations qui les régissent sont discrétisées par un schéma de discrétisation de Garlekin aux éléments finis. Le modèle a été vérifié dans des cas simples où il existe des solutions analytiques. Toutes les données nécessaires sont introduites et gérées grâce à un logiciel de gestion de SIG. Le programme de simulation est utilisé comme un outil du logiciel de SIG, constituant ainsi un outil de gestion intégrée dont le but est de simuler et d'étudier l'intrusion saline dans les aquifères côtiers. L'application du modèle à l'aquifère de Yermasogia illustre l'utilisation couplée de la modélisation et des techniques de SIG pour l'étude des systèmes aquifères côtiers régionaux. Se ha desarrollado un modelo casi tridimensional de elementos finitos para simular el flujo de agua dulce y salada, tanto en régimen estacionario como en transitorio, en sistemas acuíferos costeros, bajo la hipótesis de separación por medio de una interfaz abrupta. Las ecuaciones del modelo han sido discretizadas mediante un esquema de Galerkin de discretización en elementos finitos. El modelo ha sido verificado en casos sencillos para los que existe solución analítica. Todos los datos necesarios se introducen y gestionan con un Sistema de Información Geográfica [SIG] por ordenador. El programa de simulación forma parte del programa de SIG, constituyendo una herramienta integrada de gestión para estudiar la intrusión salina en acuíferos costeros. La aplicación del modelo al acuífero de Yermasogia ilustra el uso acoplado de las técnicas de modelación y de SIG con el fin de examinar sistemas acuíferos costeros a escala regional.

E-O Propagation, Signature and System Performance Under Adverse Meteorological Conditions Considering Out-of-Area Operations (La Propagation, la Signature et les performances des Systemes optroniques dans des Conditions Meteorologiques Defavorables, compte Tenu des Operations hors Zone)

DTIC Science & Technology

1998-09-01

distribution CSAS-100-HV 7 m (Surf-2) 0.16-32 .gm PMS2 CSASP-200 Base of Pier 15 m (Surf-1,3) Aerosol size distribution 11.2 m (Surf-2) 0.2-20 pm PMS3 CSASP-100...270 4 180 V ~C2 go 1P-2 PMS3.(6m..) PM.Sl.(12.) PMS2 in.)... ...... Reference -2- ....... .... ..... ............... kn - .2 25 26 27 28 Day number...1 (12 in) are presently available do not allow for a more sophisticated 3 ..... PMS2 (15 m) approach. 2 The horizontal aerosol flux downwind from the

Improving Weak Lensing Mass Map Reconstructions using Gaussian and Sparsity Priors: Application to DES SV

DOE PAGES

Jeffrey, N.; Abdalla, F. B.; Lahav, O.; ...

2018-05-15

Mapping the underlying density field, including non-visible dark matter, using weak gravitational lensing measurements is now a standard tool in cosmology. Due to its importance to the science results of current and upcoming surveys, the quality of the convergence reconstruction methods should be well understood. We compare three different mass map reconstruction methods: Kaiser-Squires (KS), Wiener filter, and GLIMPSE. KS is a direct inversion method, taking no account of survey masks or noise. The Wiener filter is well motivated for Gaussian density fields in a Bayesian framework. The GLIMPSE method uses sparsity, with the aim of reconstructing non-linearities in themore » density field. We compare these methods with a series of tests on the public Dark Energy Survey (DES) Science Verification (SV) data and on realistic DES simulations. The Wiener filter and GLIMPSE methods offer substantial improvement on the standard smoothed KS with a range of metrics. For both the Wiener filter and GLIMPSE convergence reconstructions we present a 12% improvement in Pearson correlation with the underlying truth from simulations. To compare the mapping methods' abilities to find mass peaks, we measure the difference between peak counts from simulated {\\Lambda}CDM shear catalogues and catalogues with no mass fluctuations. This is a standard data vector when inferring cosmology from peak statistics. The maximum signal-to-noise value of these peak statistic data vectors was increased by a factor of 3.5 for the Wiener filter and by a factor of 9 using GLIMPSE. With simulations we measure the reconstruction of the harmonic phases, showing that the concentration of the phase residuals is improved 17% by GLIMPSE and 18% by the Wiener filter. We show that the correlation between the reconstructions from data and the foreground redMaPPer clusters is increased 18% by the Wiener filter and 32% by GLIMPSE. [Abridged]« less

Improving Weak Lensing Mass Map Reconstructions using Gaussian and Sparsity Priors: Application to DES SV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey, N.; et al.

2018-01-26

Mapping the underlying density field, including non-visible dark matter, using weak gravitational lensing measurements is now a standard tool in cosmology. Due to its importance to the science results of current and upcoming surveys, the quality of the convergence reconstruction methods should be well understood. We compare three different mass map reconstruction methods: Kaiser-Squires (KS), Wiener filter, and GLIMPSE. KS is a direct inversion method, taking no account of survey masks or noise. The Wiener filter is well motivated for Gaussian density fields in a Bayesian framework. The GLIMPSE method uses sparsity, with the aim of reconstructing non-linearities in themore » density field. We compare these methods with a series of tests on the public Dark Energy Survey (DES) Science Verification (SV) data and on realistic DES simulations. The Wiener filter and GLIMPSE methods offer substantial improvement on the standard smoothed KS with a range of metrics. For both the Wiener filter and GLIMPSE convergence reconstructions we present a 12% improvement in Pearson correlation with the underlying truth from simulations. To compare the mapping methods' abilities to find mass peaks, we measure the difference between peak counts from simulated {\\Lambda}CDM shear catalogues and catalogues with no mass fluctuations. This is a standard data vector when inferring cosmology from peak statistics. The maximum signal-to-noise value of these peak statistic data vectors was increased by a factor of 3.5 for the Wiener filter and by a factor of 9 using GLIMPSE. With simulations we measure the reconstruction of the harmonic phases, showing that the concentration of the phase residuals is improved 17% by GLIMPSE and 18% by the Wiener filter. We show that the correlation between the reconstructions from data and the foreground redMaPPer clusters is increased 18% by the Wiener filter and 32% by GLIMPSE. [Abridged]« less

Improving Weak Lensing Mass Map Reconstructions using Gaussian and Sparsity Priors: Application to DES SV

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey, N.; Abdalla, F. B.; Lahav, O.

Mapping the underlying density field, including non-visible dark matter, using weak gravitational lensing measurements is now a standard tool in cosmology. Due to its importance to the science results of current and upcoming surveys, the quality of the convergence reconstruction methods should be well understood. We compare three different mass map reconstruction methods: Kaiser-Squires (KS), Wiener filter, and GLIMPSE. KS is a direct inversion method, taking no account of survey masks or noise. The Wiener filter is well motivated for Gaussian density fields in a Bayesian framework. The GLIMPSE method uses sparsity, with the aim of reconstructing non-linearities in themore » density field. We compare these methods with a series of tests on the public Dark Energy Survey (DES) Science Verification (SV) data and on realistic DES simulations. The Wiener filter and GLIMPSE methods offer substantial improvement on the standard smoothed KS with a range of metrics. For both the Wiener filter and GLIMPSE convergence reconstructions we present a 12% improvement in Pearson correlation with the underlying truth from simulations. To compare the mapping methods' abilities to find mass peaks, we measure the difference between peak counts from simulated {\\Lambda}CDM shear catalogues and catalogues with no mass fluctuations. This is a standard data vector when inferring cosmology from peak statistics. The maximum signal-to-noise value of these peak statistic data vectors was increased by a factor of 3.5 for the Wiener filter and by a factor of 9 using GLIMPSE. With simulations we measure the reconstruction of the harmonic phases, showing that the concentration of the phase residuals is improved 17% by GLIMPSE and 18% by the Wiener filter. We show that the correlation between the reconstructions from data and the foreground redMaPPer clusters is increased 18% by the Wiener filter and 32% by GLIMPSE. [Abridged]« less

DynEarthSol3D: numerical studies of basal crevasses and calving blocks

NASA Astrophysics Data System (ADS)

Logan, E.; Lavier, L. L.; Choi, E.; Tan, E.; Catania, G. A.

2014-12-01

DynEarthSol3D (DES) is a thermomechanical model for the simulation of dynamic ice flow. We present the application of DES toward two case studies - basal crevasses and calving blocks - to illustrate the potential of the model to aid in understanding calving processes. Among the advantages of using DES are: its unstructured meshes which adaptively resolve zones of high interest; its use of multiple rheologies to simulate different types of dynamic behavior; and its explicit and parallel numerical core which both make the implementation of different boundary conditions easy and the model highly scalable. We examine the initiation and development of both basal crevasses and calving blocks through time using visco-elasto-plastic rheology. Employing a brittle-to-ductile transition zone (BDTZ) based on local strain rate shows that the style and development of brittle features like crevasses differs markedly on the rheological parameters. Brittle and ductile behavior are captured by Mohr-Coulomb elastoplasticity and Maxwell viscoelasticity, respectively. We explore the parameter spaces which define these rheologies (including temperature) as well as the BDTZ threshold (shown in the literature as 10-7 Pa s), using time-to-failure as a metric for accuracy within the model. As the time it takes for a block of ice to fail can determine an iceberg's size, this work has implications for calving laws.

Identifying Candidate Reprogramming Genes in Mouse Induced Pluripotent Stem Cells.

PubMed

Gao, Fang; Li, Jingyu; Zhang, Heng; Yang, Xu; An, Tiezhu

2017-08-01

Factor-based induced reprogramming approaches have tremendous potential for human regenerative medicine, but the efficiencies of these approaches are still low. In this study, we analyzed the global transcriptional profiles of mouse induced pluripotent stem cells (miPSCs) and mouse embryonic stem cells (mESCs) from seven different labs and present here the first successful clustering according to cell type, not by lab of origin. We identified 2131 different expression genes (DEs) as candidate pluripotency-associated genes by comparing mESCs/miPSCs with somatic cells and 720 DEs between miPSCs and mESCs. Interestingly, there was a significant overlap between the two DE sets. Therefore, we defined the overlap DEs as "consensus DEs" including 313 miPSC-specific genes expressed at a higher level in miPSCs versus mESCs and 184 mESC-specific genes in total and reasoned that these may contribute to the differences in pluripotency between mESCs and miPSCs. A classification of "consensus DEs" according to their different expression levels between somatic cells and mESCs/miPSCs shows that 86% of the miPSC-specific genes are more highly expressed in somatic cells, while 73% of mESC-specific genes are highly expressed in mESCs/miPSCs, indicating that the miPSCs have not efficiently silenced the expression pattern of the somatic cells from which they are derived and failed to completely induce the genes with high expression levels in mESCs. We further revealed a strong correlation between oocyte-enriched factors and insufficiently induced mESC-specific genes and identified 11 hub genes via network analysis. In light of these findings, we postulated that these key hub genes might not only drive somatic cell nuclear transfer (SCNT) reprogramming but also augment the efficiency and quality of miPSC reprogramming.

Ultrasensitive competitive method-based electrochemiluminescence immunosensor for diethylstilbestrol detection based on Ru(bpy)32+ as luminophor encapsulated in metal-organic frameworks UiO-67.

PubMed

Dong, Xue; Zhao, Guanhui; Liu, Li; Li, Xuan; Wei, Qin; Cao, Wei

2018-07-01

In this work, Ru(bpy) 3 2+ encapsulated in metal-organic frameworks (MOFs) UiO-67 (Ru(bpy) 3 2+ /UiO-67) as luminophor was easily prepared and firstly applied in constructing an electrochemiluminescence (ECL) immunosensor to efficiently estimate diethylstilbestrol (DES). The competitive method-based ECL immunosensor platform was fabricated by amino-silicon dioxide which possesses large surface area. The poriness of UiO-67 was splendid so that Ru(bpy) 3 2+ could be easily encapsulated. Ru(bpy) 3 2+ /UiO-67 with excellent ECL luminescence signal existed large specific surface area for easily labeled with antibodies. DES competed with bovine serum albumin-diethylstilbestrol (BSA-DES) for binding to antibody-specific sites in the constructed immunosensor. However DES was micromolecule, which was easier to bond to antibodies than BSA-DES. The ECL signal was gradually decreases with the increase of the concentration of DES. Under optimal conditions, the proposed immunosensor exhibited a wide linear range from 0.01 pg mL -1 to 50 ng mL -1 with a low detetion limit of 3.27 fg mL -1 (S/N = 3). The novel fabricated immunosensor with interference immunity and high stability may cause an attractive approach for the other targets determination. Copyright © 2018 Elsevier B.V. All rights reserved.

Instrumental Response Model and Detrending for the Dark Energy Camera

DOE PAGES

Bernstein, G. M.; Abbott, T. M. C.; Desai, S.; ...

2017-09-14

We describe the model for mapping from sky brightness to the digital output of the Dark Energy Camera (DECam) and the algorithms adopted by the Dark Energy Survey (DES) for inverting this model to obtain photometric measures of celestial objects from the raw camera output. This calibration aims for fluxes that are uniform across the camera field of view and across the full angular and temporal span of the DES observations, approaching the accuracy limits set by shot noise for the full dynamic range of DES observations. The DES pipeline incorporates several substantive advances over standard detrending techniques, including principal-components-based sky and fringe subtraction; correction of the "brighter-fatter" nonlinearity; use of internal consistency in on-sky observations to disentangle the influences of quantum efficiency, pixel-size variations, and scattered light in the dome flats; and pixel-by-pixel characterization of instrument spectral response, through combination of internal-consistency constraints with auxiliary calibration data. This article provides conceptual derivations of the detrending/calibration steps, and the procedures for obtaining the necessary calibration data. Other publications will describe the implementation of these concepts for the DES operational pipeline, the detailed methods, and the validation that the techniques can bring DECam photometry and astrometry withinmore » $$\\approx 2$$ mmag and $$\\approx 3$$ mas, respectively, of fundamental atmospheric and statistical limits. In conclusion, the DES techniques should be broadly applicable to wide-field imagers.« less

Instrumental Response Model and Detrending for the Dark Energy Camera

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernstein, G. M.; Abbott, T. M. C.; Desai, S.

We describe the model for mapping from sky brightness to the digital output of the Dark Energy Camera (DECam) and the algorithms adopted by the Dark Energy Survey (DES) for inverting this model to obtain photometric measures of celestial objects from the raw camera output. This calibration aims for fluxes that are uniform across the camera field of view and across the full angular and temporal span of the DES observations, approaching the accuracy limits set by shot noise for the full dynamic range of DES observations. The DES pipeline incorporates several substantive advances over standard detrending techniques, including principal-components-based sky and fringe subtraction; correction of the "brighter-fatter" nonlinearity; use of internal consistency in on-sky observations to disentangle the influences of quantum efficiency, pixel-size variations, and scattered light in the dome flats; and pixel-by-pixel characterization of instrument spectral response, through combination of internal-consistency constraints with auxiliary calibration data. This article provides conceptual derivations of the detrending/calibration steps, and the procedures for obtaining the necessary calibration data. Other publications will describe the implementation of these concepts for the DES operational pipeline, the detailed methods, and the validation that the techniques can bring DECam photometry and astrometry withinmore » $$\\approx 2$$ mmag and $$\\approx 3$$ mas, respectively, of fundamental atmospheric and statistical limits. In conclusion, the DES techniques should be broadly applicable to wide-field imagers.« less

Simulation of hypothetical Asian carp egg and larvae development and transport in the Lockport, Brandon Road, Dresden Island, and Marseilles Pools of the Illinois Waterway by use of the Fluvial Egg Drift Simulator (FluEgg) model

USGS Publications Warehouse

Murphy, Elizabeth A.; Garcia, Tatiana; Jackson, P. Ryan; Duncker, James J.

2016-04-05

As part of the Great Lakes and Mississippi River Interbasin Study, the U.S. Army Corps of Engineers (USACE) is conducting an assessment of the vulnerability of the Chicago Area Waterway System and Des Plaines River to Asian carp (specifically, Hypophthalmichthys nobilis (bighead carp) and Hypophthalmichthys molitrix (silver carp)) spawning and recruitment. As part of this assessment, the USACE requested the help of the U.S. Geological Survey in predicting the fate and transport of Asian carp eggs hypothetically spawned at the electric dispersal barrier on the Chicago Sanitary and Ship Canal and downstream of the Brandon Road Lock and Dam on the Des Plaines River under dry weather flow and high water temperature conditions. The Fluvial Egg Drift Simulator (FluEgg) model predicted that approximately 80 percent of silver carp eggs spawned near the electric dispersal barrier would hatch within the Lockport and Brandon Road pools (as close as 3.6 miles downstream of the barrier) and approximately 82 percent of the silver carp eggs spawned near the Brandon Road Dam would hatch in the Des Plaines River (as close as 1.6 miles downstream from the gates of Brandon Road Lock). Extension of the FluEgg model to include the fate and transport of larvae until gas bladder inflation—the point at which the larvae begin to leave the drift—suggests that eggs spawned at the electric dispersal barrier would reach the gas bladder inflation stage primarily within the Dresden Island Pool, and those spawned at the Brandon Road Dam would reach this stage primarily within the Marseilles and Starved Rock Pools.

Modeling of three dimensional structure of human alpha-fetoprotein complexed with diethylstilbestrol: docking and molecular dynamics simulation study.

PubMed

Terentiev, Alexander A; Moldogazieva, Nurbubu T; Levtsova, Olga V; Maximenko, Dmitry M; Borozdenko, Denis A; Shaitan, Konstantin V

2012-04-01

It has been long experimentally demonstrated that human alpha-fetoprotein (HAFP) has an ability to bind immobilized estrogens with the most efficiency for synthetic estrogen analog - diethylstilbestrol (DES). However, the question remains why the human AFP (HAFP), unlike rodent AFP, cannot bind free estrogens. Moreover, despite the fact that AFP was first discovered more than 50 years ago and is presently recognized as a "golden standard" among onco-biomarkers, its three-dimensional (3D) structure has not been experimentally solved yet. In this work using MODELLER program, we generated 3D model of HAFP on the basis of homology with human serum albumin (HSA) and Vitamin D-binding protein (VTDB) with subsequent molecular docking of DES to the model structure and molecular dynamics (MD) simulation study of the complex obtained. The model constructed has U-shaped structure in which a cavity may be distinguished. In this cavity the putative estrogen-binding site is localized. Validation by RMSD calculation and with the use of PROCHECK program showed good quality of the model and stability of extended region of four alpha-helical structures that contains putative hormone-binding residues. Data extracted from MD simulation trajectory allow proposing two types of interactions between amino acid residues of HAFP and DES molecule: (1) hydrogen bonding with involvement of residues S445, R452, and E551; (2) hydrophobic interactions with participation of L138, M448, and M548 residues. A suggestion is made that immobilization of the hormone using a long spacer provides delivery of the estrogen molecule to the binding site and, thereby, facilitates interaction between HAFP and the hormone.

The Psychology of Violent Conflict in Failing States: A Review of the Scientific Literature (Psychologie des Conflits Violents au sein d’etats en Deroute: Analyse de Publications Scientifiques)

DTIC Science & Technology

2010-12-01

however, was the possibility for students to choose the role of insurgents. Two weeks prior to the start of the simulation, the 78 undergraduate ...King, 2009), students in a political science class participated in a week-long simulation of large-scale regional insurgency. Before the simulation... Students could choose to be government officials, such as the president or the secretary of defence of a country. Alternatively students could role-play

Multi-Sensor Systems and Data Fusion for Telecommunications, Remote Sensing and Radar (les Systemes multi-senseurs et le fusionnement des donnees pour les telecommunications, la teledetection et les radars)

DTIC Science & Technology

1998-04-01

The result of the project is a demonstration of the fusion process, the sensors management and the real-time capabilities using simulated sensors...demonstrator (TAD) is a system that demonstrates the core ele- ment of a battlefield ground surveillance system by simulation in near real-time. The core...Management and Sensor/Platform simulation . The surveillance system observes the real world through a non-collocated heterogene- ous multisensory system

Turnaround Time Modeling for Conceptual Rocket Engines

NASA Technical Reports Server (NTRS)

Nix, Michael; Staton, Eric J.

2004-01-01

Recent years have brought about a paradigm shift within NASA and the Space Launch Community regarding the performance of conceptual design. Reliability, maintainability, supportability, and operability are no longer effects of design; they have moved to the forefront and are affecting design. A primary focus of this shift has been a planned decrease in vehicle turnaround time. Potentials for instituting this decrease include attacking the issues of removing, refurbishing, and replacing the engines after each flight. less, it is important to understand the operational affects of an engine on turnaround time, ground support personnel and equipment. One tool for visualizing this relationship involves the creation of a Discrete Event Simulation (DES). A DES model can be used to run a series of trade studies to determine if the engine is meeting its requirements, and, if not, what can be altered to bring it into compliance. Using DES, it is possible to look at the ways in which labor requirements, parallel maintenance versus serial maintenance, and maintenance scheduling affect the overall turnaround time. A detailed DES model of the Space Shuttle Main Engines (SSME) has been developed. Trades may be performed using the SSME Processing Model to see where maintenance bottlenecks occur, what the benefits (if any) are of increasing the numbers of personnel, or the number and location of facilities, in addition to trades previously mentioned, all with the goal of optimizing the operational turnaround time and minimizing operational cost. The SSME Processing Model was developed in such a way that it can easily be used as a foundation for developing DES models of other operational or developmental reusable engines. Performing a DES on a developmental engine during the conceptual phase makes it easier to affect the design and make changes to bring about a decrease in turnaround time and costs.

CO2 laser irradiation enhances CaF2 formation and inhibits lesion progression on demineralized dental enamel-in vitro study.

PubMed

Zancopé, Bruna R; Rodrigues, Lívia P; Parisotto, Thais M; Steiner-Oliveira, Carolina; Rodrigues, Lidiany K A; Nobre-dos-Santos, Marinês

2016-04-01

This study evaluated if Carbon dioxide (CO2) (λ 10.6 μm) laser irradiation combined with acidulated phosphate fluoride gel application (APF gel) enhances "CaF2" uptake by demineralized enamel specimens (DES) and inhibits enamel lesion progression. Thus, two studies were conducted and DES were subjected to APF gel combined or not with CO2 laser irradiation (11.3 or 20.0 J/cm(2), 0.4 or 0.7 W) performed before, during, or after APF gel application. In study 1, 165 DES were allocated to 11 groups. Fluoride as "CaF2 like material" formed on enamel was determined in 100 DES (n = 10/group), and the surface morphologies of 50 specimens were evaluated by scanning electron microscopy (SEM) before and after "CaF2" extraction. In study 2, 165 DES (11 groups, n = 15), subjected to the same treatments as in study 1, were further subjected to a pH-cycling model to simulate a high cariogenic challenge. The progression of demineralization in DES was evaluated by cross-sectional microhardness and polarized light microscopy analyses. Laser at 11.3 J/cm(2) applied during APF gel application increased "CaF2" uptake on enamel surface. Laser irradiation and APF gel alone arrested the lesion progression compared with the control (p < 0.05). Areas of melting, fusion, and cracks were observed. CO2 laser irradiation, combined with a single APF application enhanced "CaF2" uptake on enamel surface and a synergistic effect was found. However, regarding the inhibition of caries lesion progression, no synergistic effect could be demonstrated. In conclusion, the results have shown that irradiation with specific laser parameters significantly enhanced CaF2 uptake by demineralized enamel and inhibited lesion progression.

Navigation d'un vehicule autonome autour d'un asteroide

NASA Astrophysics Data System (ADS)

Dionne, Karine

Les missions d'exploration planetaire utilisent des vehicules spatiaux pour acquerir les donnees scientifiques qui font avancer notre connaissance du systeme solaire. Depuis les annees 90, ces missions ciblent non seulement les planetes, mais aussi les corps celestes de plus petite taille comme les asteroides. Ces astres representent un defi particulier du point de vue des systemes de navigation, car leur environnement dynamique est complexe. Une sonde spatiale doit reagir rapidement face aux perturbations gravitationnelles en presence, sans quoi sa securite pourrait etre compromise. Les delais de communication avec la Terre pouvant souvent atteindre plusieurs dizaines de minutes, il est necessaire de developper des logiciels permettant une plus grande autonomie d'operation pour ce type de mission. Ce memoire presente un systeme de navigation autonome qui determine la position et la vitesse d'un satellite en orbite autour d'un asteroide. Il s'agit d'un filtre de Kalman etendu adaptatif a trois degres de liberte. Le systeme propose se base sur l'imagerie optique pour detecter des " points de reperes " qui ont ete prealablement cartographies. Il peut s'agir de crateres, de rochers ou de n'importe quel trait physique discernable a la camera. Les travaux de recherche realises se concentrent sur les techniques d'estimation d'etat propres a la navigation autonome. Ainsi, on suppose l'existence d'un logiciel approprie qui realise les fonctions de traitement d'image. La principale contribution de recherche consiste en l'inclusion, a chaque cycle d'estimation, d'une mesure de distance afin d'ameliorer les performances de navigation. Un estimateur d'etat de type adaptatif est necessaire pour le traitement de ces mesures, car leur precision varie dans le temps en raison de l'erreur de pointage. Les contributions secondaires de recherche sont liees a l'analyse de l'observabilite du systeme ainsi qu'a une analyse de sensibilite pour six parametres principaux de conception. Les resultats de simulation montrent que l'ajout d'une mesure de distance par cycle de mise a jour entraine une amelioration significative des performances de navigation. Ce procede reduit l'erreur d'estimation ainsi que les periodes de non-observabilite en plus de contrer la dilution de precision des mesures. Les analyses de sensibilite confirment quant a elles la contribution des mesures de distance a la diminution globale de l'erreur d'estimation et ce pour une large gamme de parametres de conception. Elles indiquent egalement que l'erreur de cartographie est un parametre critique pour les performances du systeme de navigation developpe. Mots cles : Estimation d'etat, filtre de Kalman adaptatif, navigation optique, lidar, asteroide, simulations numeriques

Prevalence of Dry Eye Syndrome after a Three-Year Exposure to a Clean Room

PubMed Central

2014-01-01

Objective To measure the prevalence of dry eye syndrome (DES) among clean room (relative humidity ≤1%) workers from 2011 to 2013. Methods Three annual DES examinations were performed completely in 352 clean room workers aged 20–40 years who were working at a secondary battery factory. Each examination comprised the tear-film break-up test (TFBUT), Schirmer’s test I, slit-lamp microscopic examination, and McMonnies questionnaire. DES grades were measured using the Delphi approach. The annual examination results were analyzed using a general linear model and post-hoc analysis with repeated-ANOVA (Tukey). Multiple logistic regression was performed using the examination results from 2013 (dependent variable) to analyze the effect of years spent working in the clean room (independent variable). Results The prevalence of DES among these workers was 14.8% in 2011, 27.1% in 2012, and 32.8% in 2013. The TFBUT and McMonnies questionnaire showed that DES grades worsened over time. Multiple logistic regression analysis indicated that the odds ratio for having dry eyes was 1.130 (95% CI 1.012–1.262) according to the findings of the McMonnies questionnaire. Conclusions This 3-year trend suggests that the increased prevalence of DES was associated with longer working hours. To decrease the prevalence of DES, employees should be assigned reasonable working hours with shift assignments that include appropriate break times. Workers should also wear protective eyewear, subdivide their working process to minimize exposure, and utilize preservative-free eye drops. PMID:25339991

Synthetic Infrared Scene: Improving the KARMA IRSG Module and Signature Modelling Tool SMAT

DTIC Science & Technology

2011-03-01

d’engagements impliquant des autodirecteurs infrarouges dans l’environnement de simulation KARMA. Le travail a été réalisé à partir de novembre 2008...infrarouges dans l’environnement de simulation KARMA. Le travail a été réalisé à partir de novembre 2008 jusqu’à mars 2011. Ce rapport de contrat est axé...74 13 Evaluating Performance Validator tool

System design and improvement of an emergency department using Simulation-Based Multi-Objective Optimization

NASA Astrophysics Data System (ADS)

Goienetxea Uriarte, A.; Ruiz Zúñiga, E.; Urenda Moris, M.; Ng, A. H. C.

2015-05-01

Discrete Event Simulation (DES) is nowadays widely used to support decision makers in system analysis and improvement. However, the use of simulation for improving stochastic logistic processes is not common among healthcare providers. The process of improving healthcare systems involves the necessity to deal with trade-off optimal solutions that take into consideration a multiple number of variables and objectives. Complementing DES with Multi-Objective Optimization (SMO) creates a superior base for finding these solutions and in consequence, facilitates the decision-making process. This paper presents how SMO has been applied for system improvement analysis in a Swedish Emergency Department (ED). A significant number of input variables, constraints and objectives were considered when defining the optimization problem. As a result of the project, the decision makers were provided with a range of optimal solutions which reduces considerably the length of stay and waiting times for the ED patients. SMO has proved to be an appropriate technique to support healthcare system design and improvement processes. A key factor for the success of this project has been the involvement and engagement of the stakeholders during the whole process.

The tissue micro-array data exchange specification: a web based experience browsing imported data

PubMed Central

Nohle, David G; Hackman, Barbara A; Ayers, Leona W

2005-01-01

Background The AIDS and Cancer Specimen Resource (ACSR) is an HIV/AIDS tissue bank consortium sponsored by the National Cancer Institute (NCI) Division of Cancer Treatment and Diagnosis (DCTD). The ACSR offers to approved researchers HIV infected biologic samples and uninfected control tissues including tissue cores in micro-arrays (TMA) accompanied by de-identified clinical data. Researchers interested in the type and quality of TMA tissue cores and the associated clinical data need an efficient method for viewing available TMA materials. Because each of the tissue samples within a TMA has separate data including a core tissue digital image and clinical data, an organized, standard approach to producing, navigating and publishing such data is necessary. The Association for Pathology Informatics (API) extensible mark-up language (XML) TMA data exchange specification (TMA DES) proposed in April 2003 provides a common format for TMA data. Exporting TMA data into the proposed format offers an opportunity to implement the API TMA DES. Using our public BrowseTMA tool, we created a web site that organizes and cross references TMA lists, digital "virtual slide" images, TMA DES export data, linked legends and clinical details for researchers. Microsoft Excel® and Microsoft Word® are used to convert tabular clinical data and produce an XML file in the TMA DES format. The BrowseTMA tool contains Extensible Stylesheet Language Transformation (XSLT) scripts that convert XML data into Hyper-Text Mark-up Language (HTML) web pages with hyperlinks automatically added to allow rapid navigation. Results Block lists, virtual slide images, legends, clinical details and exports have been placed on the ACSR web site for 14 blocks with 1623 cores of 2.0, 1.0 and 0.6 mm sizes. Our virtual microscope can be used to view and annotate these TMA images. Researchers can readily navigate from TMA block lists to TMA legends and to clinical details for a selected tissue core. Exports for 11 blocks with 3812 cores from three other institutions were processed with the BrowseTMA tool. Fifty common data elements (CDE) from the TMA DES were used and 42 more created for site-specific data. Researchers can download TMA clinical data in the TMA DES format. Conclusion Virtual TMAs with clinical data can be viewed on the Internet by interested researchers using the BrowseTMA tool. We have organized our approach to producing, sorting, navigating and publishing TMA information to facilitate such review. We have converted Excel TMA data into TMA DES XML, and imported it and TMA DES XML from another institution into BrowseTMA to produce web pages that allow us to browse through the merged data. We proposed enhancements to the TMA DES as a result of this experience. We implemented improvements to the API TMA DES as a result of using exported data from several institutions. A document type definition was written for the API TMA DES (that optionally includes proposed enhancements). Independent validators can be used to check exports against the DTD (with or without the proposed enhancements). Linking tissue core images to readily navigable clinical data greatly improves the value of the TMA. PMID:16086837

An approach to developing an integrated pyroprocessing simulator

NASA Astrophysics Data System (ADS)

Lee, Hyo Jik; Ko, Won Il; Choi, Sung Yeol; Kim, Sung Ki; Kim, In Tae; Lee, Han Soo

2014-02-01

Pyroprocessing has been studied for a decade as one of the promising fuel recycling options in Korea. We have built a pyroprocessing integrated inactive demonstration facility (PRIDE) to assess the feasibility of integrated pyroprocessing technology and scale-up issues of the processing equipment. Even though such facility cannot be replaced with a real integrated facility using spent nuclear fuel (SF), many insights can be obtained in terms of the world's largest integrated pyroprocessing operation. In order to complement or overcome such limited test-based research, a pyroprocessing Modelling and simulation study began in 2011. The Korea Atomic Energy Research Institute (KAERI) suggested a Modelling architecture for the development of a multi-purpose pyroprocessing simulator consisting of three-tiered models: unit process, operation, and plant-level-model. The unit process model can be addressed using governing equations or empirical equations as a continuous system (CS). In contrast, the operation model describes the operational behaviors as a discrete event system (DES). The plant-level model is an integrated model of the unit process and an operation model with various analysis modules. An interface with different systems, the incorporation of different codes, a process-centered database design, and a dynamic material flow are discussed as necessary components for building a framework of the plant-level model. As a sample model that contains methods decoding the above engineering issues was thoroughly reviewed, the architecture for building the plant-level-model was verified. By analyzing a process and operation-combined model, we showed that the suggested approach is effective for comprehensively understanding an integrated dynamic material flow. This paper addressed the current status of the pyroprocessing Modelling and simulation activity at KAERI, and also predicted its path forward.

An approach to developing an integrated pyroprocessing simulator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Hyo Jik; Ko, Won Il; Choi, Sung Yeol

Pyroprocessing has been studied for a decade as one of the promising fuel recycling options in Korea. We have built a pyroprocessing integrated inactive demonstration facility (PRIDE) to assess the feasibility of integrated pyroprocessing technology and scale-up issues of the processing equipment. Even though such facility cannot be replaced with a real integrated facility using spent nuclear fuel (SF), many insights can be obtained in terms of the world's largest integrated pyroprocessing operation. In order to complement or overcome such limited test-based research, a pyroprocessing Modelling and simulation study began in 2011. The Korea Atomic Energy Research Institute (KAERI) suggestedmore » a Modelling architecture for the development of a multi-purpose pyroprocessing simulator consisting of three-tiered models: unit process, operation, and plant-level-model. The unit process model can be addressed using governing equations or empirical equations as a continuous system (CS). In contrast, the operation model describes the operational behaviors as a discrete event system (DES). The plant-level model is an integrated model of the unit process and an operation model with various analysis modules. An interface with different systems, the incorporation of different codes, a process-centered database design, and a dynamic material flow are discussed as necessary components for building a framework of the plant-level model. As a sample model that contains methods decoding the above engineering issues was thoroughly reviewed, the architecture for building the plant-level-model was verified. By analyzing a process and operation-combined model, we showed that the suggested approach is effective for comprehensively understanding an integrated dynamic material flow. This paper addressed the current status of the pyroprocessing Modelling and simulation activity at KAERI, and also predicted its path forward.« less

Fast Plasma Instrument for MMS: Data Compression Simulation Results

NASA Astrophysics Data System (ADS)

Barrie, A. C.; Adrian, M. L.; Yeh, P.; Winkert, G. E.; Lobell, J. V.; Viňas, A. F.; Simpson, D. G.; Moore, T. E.

2008-12-01

Magnetospheric Multiscale (MMS) mission will study small-scale reconnection structures and their rapid motions from closely spaced platforms using instruments capable of high angular, energy, and time resolution measurements. To meet these requirements, the Fast Plasma Instrument (FPI) consists of eight (8) identical half top-hat electron sensors and eight (8) identical ion sensors and an Instrument Data Processing Unit (IDPU). The sensors (electron or ion) are grouped into pairs whose 6° × 180° fields-of-view (FOV) are set 90° apart. Each sensor is equipped with electrostatic aperture steering to allow the sensor to scan a 45° × 180° fan about the its nominal viewing (0° deflection) direction. Each pair of sensors, known as the Dual Electron Spectrometer (DES) and the Dual Ion Spectrometer (DIS), occupies a quadrant on the MMS spacecraft and the combination of the eight electron/ion sensors, employing aperture steering, image the full-sky every 30-ms (electrons) and 150-ms (ions), respectively. To probe the diffusion regions of reconnection, the highest temporal/spatial resolution mode of FPI results in the DES complement of a given spacecraft generating 6.5-Mb s-1 of electron data while the DIS generates 1.1-Mb s-1 of ion data yielding an FPI total data rate of 7.6-Mb s-1. The FPI electron/ion data is collected by the IDPU then transmitted to the Central Data Instrument Processor (CIDP) on the spacecraft for science interest ranking. Only data sequences that contain the greatest amount of temporal/spatial structure will be intelligently down-linked by the spacecraft. Currently, the FPI data rate allocation to the CIDP is 1.5-Mb s-1. Consequently, the FPI-IDPU must employ data/image compression to meet this CIDP telemetry allocation. Here, we present simulations of the CCSDS 122.0-B-1 algorithm- based compression of the FPI-DES electron data. Compression analysis is based upon a seed of re- processed Cluster/PEACE electron measurements. Topics to be discussed include: (i) Review of compression algorithm; (ii) Data quality; (iii) Data formatting/organization; (iv) Compression optimization; and (v) Implications for data/matrix pruning. We conclude with a presentation of the base-lined FPI data compression approach.

Simulations of the OzDES AGN reverberation mapping project

DOE PAGES

King, Anthea L.; Martini, Paul; Davis, Tamara M.; ...

2015-08-26

As part of the Australian spectroscopic dark energy survey (OzDES) we are carrying out a large-scale reverberation mapping study of ~500 quasars over five years in the 30 deg 2 area of the Dark Energy Survey (DES) supernova fields. These quasars have redshifts ranging up to 4 and have apparent AB magnitudes between 16.8 mag < r < 22.5 mag. The aim of the survey is to measure time lags between fluctuations in the quasar continuum and broad emission-line fluxes of individual objects in order to measure black hole masses for a broad range of active galactic nuclei (AGN) andmore » constrain the radius–luminosity (R–L) relationship. Here we investigate the expected efficiency of the OzDES reverberation mapping campaign and its possible extensions. We expect to recover lags for ~35–45 % of the quasars. AGN with shorter lags and greater variability are more likely to yield a lag measurement, and objects with lags ≲6 months or ~1 yr are expected to be recovered the most accurately. The baseline OzDES reverberation mapping campaign is predicted to produce an unbiased measurement of the R–L relationship parameters for Hβ, MgIIλ2798, and C IVλ1549. As a result, extending the baseline survey by either increasing the spectroscopic cadence, extending the survey season, or improving the emission-line flux measurement accuracy will significantly improve the R–L parameter constraints for all broad emission lines.« less

Using Discrete Event Simulation to Model Integrated Commodities Consumption for a Launch Campaign of the Space Launch System

NASA Technical Reports Server (NTRS)

Leonard, Daniel; Parsons, Jeremy W.; Cates, Grant

2014-01-01

In May 2013, NASA's GSDO Program requested a study to develop a discrete event simulation (DES) model that analyzes the launch campaign process of the Space Launch System (SLS) from an integrated commodities perspective. The scope of the study includes launch countdown and scrub turnaround and focuses on four core launch commodities: hydrogen, oxygen, nitrogen, and helium. Previously, the commodities were only analyzed individually and deterministically for their launch support capability, but this study was the first to integrate them to examine the impact of their interactions on a launch campaign as well as the effects of process variability on commodity availability. The study produced a validated DES model with Rockwell Arena that showed that Kennedy Space Center's ground systems were capable of supporting a 48-hour scrub turnaround for the SLS. The model will be maintained and updated to provide commodity consumption analysis of future ground system and SLS configurations.

Pour une approche des grammaires d'apprentissage (Toward an Approach to Learners' Grammars).

ERIC Educational Resources Information Center

Feve, Guy

1984-01-01

An approach to teaching grammar that combines an understanding of the error patterns of nonnative speakers and a theoretical model that describes that language is better suited than most to the actual audience of that instruction. (MSE)

Etude microdosimetrique de l'influence des materiaux sur l'efficacite biologique d'une source d'iode-125

NASA Astrophysics Data System (ADS)

Taschereau, Richard

Cette these concerne les implants permanents pour la prostate. Les isotopes employes, le 103Pd et l'125I, semblent produire les memes resultats cliniques: le premier a cause d'une radiation plus efficace et le second a cause de sa demi-vie plus longue. La recherche utilise le cadre theorique de la microdosimetrie et des simulations Monte Carlo. Elle propose d'employer le spectre d'ejection dans le calcul de l'efficacite; ce changement fait passer l'efficacite relative du 103Pd de 10% a 5%. Elle montre ensuite qu'il est possible d'ameliorer l'efficacite de la radiation de 125I par l'exploitation des rayons X caracteristiques de la capsule. Une source amelioree faite de molybdene et d'yttrium est donnee en exemple. Elle procure une radiation de 5--7% plus efficace, ce qui surclasse les deux sources existantes. Les applications ne se limitent pas au traitement de la prostate; le traitement du melanome oculaire et la curietherapie endovasculaire pourraient en beneficier.

Multiscale Materials Science: A Mathematical Approach to the Role of Defects and Uncertainty

DTIC Science & Technology

2015-03-01

ADDRESS(ES) Ecole Nationale des Ponts et Chaussees 6 et 8 avenue Blaise Pascal, Cite Descartes , Champs sur Marne 77 455 Marne la Vallee Cedex 2...nationale des ponts et chaussees 6 et 8 avenue Blaise-Pascal, Cite Descartes Champs-sur-Marne F-77455 Mame-la-Vallee cedex 2 www.enpc.fr tel...CHAUSSEES 6, AVENUE BLAISE PASCAL 6 ET 8 CITE DESCARTES CHAMPS SUR MARNE, 77420 FR 13d. BUSINESS OFFICE CONTACT: CAROLINA GARCIA-OLMEDO 13e

Validation and optimization of SST k-ω turbulence model for pollutant dispersion within a building array

NASA Astrophysics Data System (ADS)

Yu, Hesheng; Thé, Jesse

2016-11-01

The prediction of the dispersion of air pollutants in urban areas is of great importance to public health, homeland security, and environmental protection. Computational Fluid Dynamics (CFD) emerges as an effective tool for pollutant dispersion modelling. This paper reports and quantitatively validates the shear stress transport (SST) k-ω turbulence closure model and its transitional variant for pollutant dispersion under complex urban environment for the first time. Sensitivity analysis is performed to establish recommendation for the proper use of turbulence models in urban settings. The current SST k-ω simulation is validated rigorously by extensive experimental data using hit rate for velocity components, and the "factor of two" of observations (FAC2) and fractional bias (FB) for concentration field. The simulation results show that current SST k-ω model can predict flow field nicely with an overall hit rate of 0.870, and concentration dispersion with FAC2 = 0.721 and FB = 0.045. The flow simulation of the current SST k-ω model is slightly inferior to that of a detached eddy simulation (DES), but better than that of standard k-ε model. However, the current study is the best among these three model approaches, when validated against measurements of pollutant dispersion in the atmosphere. This work aims to provide recommendation for proper use of CFD to predict pollutant dispersion in urban environment.

Evolution of large-sclae plasma structures in comets: Kinematics and physics

NASA Technical Reports Server (NTRS)

Brandt, John C.

1988-01-01

Disconnection Events are the dramatic part of the periodic morphology involving the separation of the entire plasma tail from the head region of the comet and the growth of a new plasma. The coordinated observations of Comet Halley recorded approximately 30 DEs during the 7 months of plasma activity; 19 of these are obvious. The plasma physics of these events were approached via a detailed, kinematic investigation of specific DEs and the solar-wind environment associated with it. As the detailed investigations are completed, researchers should be able to answer the question of a single or multiple mechanism(s) for DEs and determine which mechanism(s) are important. At present, the mechanism of sunward magnetic reconnection caused by interplanetary sector boundary crossing in consistent with the data available.

Some physical approaches to protein folding

NASA Astrophysics Data System (ADS)

Bascle, J.; Garel, T.; Orland, H.

1993-02-01

To understand how a protein folds is a problem which has important biological implications. In this article, we would like to present a physics-oriented point of view, which is twofold. First of all, we introduce simple statistical mechanics models which display, in the thermodynamic limit, folding and related transitions. These models can be divided into (i) crude spin glass-like models (with their Mattis analogs), where one may look for possible correlations between the chain self-interactions and the folded structure, (ii) glass-like models, where one emphasizes the geometrical competition between one- or two-dimensional local order (mimicking α helix or β sheet structures), and the requirement of global compactness. Both models are too simple to predict the spatial organization of a realistic protein, but are useful for the physicist and should have some feedback in other glassy systems (glasses, collapsed polymers .... ). These remarks lead us to the second physical approach, namely a new Monte-Carlo method, where one grows the protein atom-by-atom (or residue-by-residue), using a standard form (CHARMM .... ) for the total energy. A detailed comparison with other Monte-Carlo schemes, or Molecular Dynamics calculations, is then possible; we will sketch such a comparison for poly-alanines. Our twofold approach illustrates some of the difficulties one encounters in the protein folding problem, in particular those associated with the existence of a large number of metastable states. Le repliement des protéines est un problème qui a de nombreuses implications biologiques. Dans cet article, nous présentons, de deux façons différentes, un point de vue de physicien. Nous introduisons tout d'abord des modèles simples de mécanique statistique qui exhibent, à la limite thermodynamique, des transitions de repliement. Ces modèles peuvent être divisés en (i) verres de spin (éventuellement à la Mattis), où l'on peut chercher des corrélations entre les interactions intrachaîne et la structure repliée, (ii) verres, où l'on met l'accent sur la compétition géométrique entre l'ordre local uni- ou bi-dimensionnel (qui modèle les structures en hélices α ou en feuillets β), et la contrainte globale de compacité. Ces deux types de modèles sont trop simples pour l'étude de vraies protéines, mais ils devraient s'appliquer dans le domaine de la transition vitreuse, des polymères collapsés,... La deuxième voie d'étude est une méthode Monte-Carlo, où on fait croître la protéine atome par atome (ou résidu par résidu), à l'aide d'une forme donnée de l'énergie totale de la protéine (CHARMM, ... ). Cette méthode peut être alors comparée aux autres méthodes numériques; nous comparons ainsi nos résultats avec des calculs de dynamique moléculaire pour le cas des poly-alanines. Cette double approche est une bonne illustration des difficultés que l'on rencontre dans le problème du repliement des protéines (nombreux états métastables, ... ).

Guideline on Scenario Development for (Distributed) Simulation Environments (Guide en vue du developpement de scenario dans le cadre de simulation distribuee)

DTIC Science & Technology

2015-01-01

des lacunes de M&S du MORS du NMSG a déterminé que le manque d’interopérabilité de la simulation constituait la lacune prioritaire à combler en...matière de capacité, une équipe exploratoire (ET-027) a été constituée au sein du NMSG pour étudier l’interopérabilité de la simulation. L’ET-027 a...élevés (autrement dit, aux niveaux pratique, dynamique et conceptuel) de même que l’automatisation relative du développement, de

Airlift Operation Modeling Using Discrete Event Simulation (DES)

DTIC Science & Technology

2009-12-01

Java ......................................................................................................20 2. Simkit...JRE Java Runtime Environment JVM Java Virtual Machine lbs Pounds LAM Load Allocation Mode LRM Landing Spot Reassignment Mode LEGO Listener Event...SOFTWARE DEVELOPMENT ENVIRONMENT The following are the software tools and development environment used for constructing the models. 1. Java Java

Use of DES Modeling for Determining Launch Availability for SLS

NASA Technical Reports Server (NTRS)

Watson, Michael; Staton, Eric; Cates, Grant; Finn, Ronald; Altino, Karen M.; Burns, K. Lee

2014-01-01

(1) NASA is developing a new heavy lift launch system for human and scientific exploration beyond Earth orbit comprising of the Space Launch System (SLS), Orion Multi-Purpose Crew Vehicle (MPCV), and Ground Systems Development and Operations (GSDO); (2) The desire of the system is to ensure a high confidence of successfully launching the exploration missions, especially those that require multiple launches, have a narrow Earth departure window, and high investment costs; and (3) This presentation discusses the process used by a Cross-Program team to develop the Exploration Systems Development (ESD) Launch Availability (LA) Technical Performance Measure (TPM) and allocate it to each of the Programs through the use of Discrete Event Simulations (DES).

Dark Energy Survey Year 1 Results: Methodology and Projections for Joint Analysis of Galaxy Clustering, Galaxy Lensing, and CMB Lensing Two-point Functions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giannantonio, T.; et al.

Optical imaging surveys measure both the galaxy density and the gravitational lensing-induced shear fields across the sky. Recently, the Dark Energy Survey (DES) collaboration used a joint fit to two-point correlations between these observables to place tight constraints on cosmology (DES Collaboration et al. 2017). In this work, we develop the methodology to extend the DES Collaboration et al. (2017) analysis to include cross-correlations of the optical survey observables with gravitational lensing of the cosmic microwave background (CMB) as measured by the South Pole Telescope (SPT) and Planck. Using simulated analyses, we show how the resulting set of five two-pointmore » functions increases the robustness of the cosmological constraints to systematic errors in galaxy lensing shear calibration. Additionally, we show that contamination of the SPT+Planck CMB lensing map by the thermal Sunyaev-Zel'dovich effect is a potentially large source of systematic error for two-point function analyses, but show that it can be reduced to acceptable levels in our analysis by masking clusters of galaxies and imposing angular scale cuts on the two-point functions. The methodology developed here will be applied to the analysis of data from the DES, the SPT, and Planck in a companion work.« less

Development of the Verona coding definitions of emotional sequences to code health providers' responses (VR-CoDES-P) to patient cues and concerns.

PubMed

Del Piccolo, Lidia; de Haes, Hanneke; Heaven, Cathy; Jansen, Jesse; Verheul, William; Bensing, Jozien; Bergvik, Svein; Deveugele, Myriam; Eide, Hilde; Fletcher, Ian; Goss, Claudia; Humphris, Gerry; Kim, Young-Mi; Langewitz, Wolf; Mazzi, Maria Angela; Mjaaland, Trond; Moretti, Francesca; Nübling, Matthias; Rimondini, Michela; Salmon, Peter; Sibbern, Tonje; Skre, Ingunn; van Dulmen, Sandra; Wissow, Larry; Young, Bridget; Zandbelt, Linda; Zimmermann, Christa; Finset, Arnstein

2011-02-01

To present a method to classify health provider responses to patient cues and concerns according to the VR-CoDES-CC (Del Piccolo et al. (2009) [2] and Zimmermann et al. (submitted for publication) [3]). The system permits sequence analysis and a detailed description of how providers handle patient's expressions of emotion. The Verona-CoDES-P system has been developed based on consensus views within the "Verona Network of Sequence Analysis". The different phases of the creation process are described in detail. A reliability study has been conducted on 20 interviews from a convenience sample of 104 psychiatric consultations. The VR-CoDES-P has two main classes of provider responses, corresponding to the degree of explicitness (yes/no) and space (yes/no) that is given by the health provider to each cue/concern expressed by the patient. The system can be further subdivided into 17 individual categories. Statistical analyses showed that the VR-CoDES-P is reliable (agreement 92.86%, Cohen's kappa 0.90 (±0.04) p<0.0001). Once validity and reliability are tested in different settings, the system should be applied to investigate the relationship between provider responses to patients' expression of emotions and outcome variables. Research employing the VR-CoDES-P should be applied to develop research-based approaches to maximize appropriate responses to patients' indirect and overt expressions of emotional needs. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Globular cluster systems as tracers of environmental effects on Virgo early-type dwarfs

NASA Astrophysics Data System (ADS)

Sánchez-Janssen, R.; Aguerri, J. A. L.

2012-08-01

Early-type dwarfs (dEs) are by far the most abundant galaxy population in nearby clusters. Whether these objects are primordial, or the recent end products of the different physical mechanisms that can transform galaxies once they enter these high-density environments, is still a matter of debate. Here we present a novel approach to test these scenarios by comparing the properties of the globular cluster systems (GCSs) of Virgo dEs and their potential progenitors with simple predictions from gravitational and hydrodynamical interaction models. We show that low-mass (M★ ≲ 2 × 108 M⊙) dEs have GCSs consistent with the descendants of gas-stripped late-type dwarfs. On the other hand, higher mass dEs have properties - including the high mass specific frequencies of their GCSs and their concentrated spatial distribution within Virgo - incompatible with a recent, environmentally driven evolution. They mostly comprise nucleated systems, but also dEs with recent star formation and/or disc features. Bright, nucleated dEs appear to be a population that has long resided within the cluster potential well, but have surprisingly managed to retain very rich and spatially extended GCSs - possibly an indication of high total masses. Our analysis does not favour violent evolutionary mechanisms that result in significant stellar mass-losses, but more gentle processes involving gas removal by a combination of internal and external factors, and highlights the relevant role of initial conditions. Additionally, we briefly comment on the origin of luminous cluster S0 galaxies.

Masked areas in shear peak statistics. A forward modeling approach

DOE PAGES

Bard, D.; Kratochvil, J. M.; Dawson, W.

2016-03-09

The statistics of shear peaks have been shown to provide valuable cosmological information beyond the power spectrum, and will be an important constraint of models of cosmology in forthcoming astronomical surveys. Surveys include masked areas due to bright stars, bad pixels etc., which must be accounted for in producing constraints on cosmology from shear maps. We advocate a forward-modeling approach, where the impacts of masking and other survey artifacts are accounted for in the theoretical prediction of cosmological parameters, rather than correcting survey data to remove them. We use masks based on the Deep Lens Survey, and explore the impactmore » of up to 37% of the survey area being masked on LSST and DES-scale surveys. By reconstructing maps of aperture mass the masking effect is smoothed out, resulting in up to 14% smaller statistical uncertainties compared to simply reducing the survey area by the masked area. We show that, even in the presence of large survey masks, the bias in cosmological parameter estimation produced in the forward-modeling process is ≈1%, dominated by bias caused by limited simulation volume. We also explore how this potential bias scales with survey area and evaluate how much small survey areas are impacted by the differences in cosmological structure in the data and simulated volumes, due to cosmic variance.« less

MASKED AREAS IN SHEAR PEAK STATISTICS: A FORWARD MODELING APPROACH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bard, D.; Kratochvil, J. M.; Dawson, W., E-mail: djbard@slac.stanford.edu

2016-03-10

The statistics of shear peaks have been shown to provide valuable cosmological information beyond the power spectrum, and will be an important constraint of models of cosmology in forthcoming astronomical surveys. Surveys include masked areas due to bright stars, bad pixels etc., which must be accounted for in producing constraints on cosmology from shear maps. We advocate a forward-modeling approach, where the impacts of masking and other survey artifacts are accounted for in the theoretical prediction of cosmological parameters, rather than correcting survey data to remove them. We use masks based on the Deep Lens Survey, and explore the impactmore » of up to 37% of the survey area being masked on LSST and DES-scale surveys. By reconstructing maps of aperture mass the masking effect is smoothed out, resulting in up to 14% smaller statistical uncertainties compared to simply reducing the survey area by the masked area. We show that, even in the presence of large survey masks, the bias in cosmological parameter estimation produced in the forward-modeling process is ≈1%, dominated by bias caused by limited simulation volume. We also explore how this potential bias scales with survey area and evaluate how much small survey areas are impacted by the differences in cosmological structure in the data and simulated volumes, due to cosmic variance.« less

Étude des perturbations conduites et rayonnées dans une cellule de commutation

NASA Astrophysics Data System (ADS)

Costa, F.; Forest, F.; Puzo, A.; Rojat, G.

1993-12-01

The principles used in static conversion and the rise of the performances of the new switching devices contribue to increase the level of electromagnetic noises emitted by electronic converters. We have studied the way how these perturbations are created and coupled through their environment in conducted and radiated mode by a switching cell. This one can work in hard switching, zero current or voltage switching modes. We first outline the general problems of electromagnetic pollution and their metrology in converters. Then we describe the experimental environment. We analyse the mechanisms of generation of parasitic signals in a switching cell related to the electrical constraints and its switching mode. The simulated results, issued of the analytical models obtained, are confronted with the experimental ones. Then we show a method to calculate analytically the E and H near fields. It has been confirmed by experimental results. At last, we present, in a synthetic manner, the main results obtained, relative to the switching mode and the electrical constraints, using a new characterizing method. Theses results will allow the designer to incorporate the electromagnetic considerations in the conception of a converter. Les principes de commutation employés en conversion statique, l'évolution des performances statiques et dynamiques des composants, contribuent à faire des dispositifs de conversion statique de puissants générateurs de perturbations conduites et rayonnées. Nous nous sommes attachés à étudier les mécanismes de génération et de couplage des perturbations, tant en mode conduit que rayonné dans des structures à une seule cellule de commutation et fonctionnant selon les trois principaux modes de commutation : commutation forcée, à zéro de courant (ZCS), et à zéro de tension (ZVS). Après la mise en évidence de la problématique de pollution électromagnétique dans les structures et leur métrologie, nous décrivons l'environnement expérimental étudié. Nous analysons ensuite les principaux mécanismes produisant les perturbations au sein d'une cellule de commutation en introduisant un certain nombre de composants parasites. Les modèles sont simulés et confrontés aux résultats expérimentaux. Nous décrivons alors une méthode, validée expérimentalement et permettant de calculer les intensités des champs E et H proches émis. Enfin, nous présentons de façon synthétique les résultats observés selon les régimes de fonctionnement de la cellule de commutation et les contraintes électriques et dynamiques qu'elle subit. Nous avons, pour ce faire, développé une méthode originale de quantification des signaux perturbateurs. Les résultats obtenus doivent permettre d'intégrer les problèmes de pollution électromagnétique au stade de la conception d'un dispositif.

Evaluation of probabilistic flow in two unsaturated soils

NASA Astrophysics Data System (ADS)

Boateng, Samuel

2001-11-01

A variably saturated flow model is coupled to a first-order reliability algorithm to simulate unsaturated flow in two soils. The unsaturated soil properties are considered as uncertain variables with means, standard deviations, and marginal probability distributions. Thus, each simulation constitutes an unsaturated probability flow event. Sensitivities of the uncertain variables are estimated for each event. The unsaturated hydraulic properties of a fine-textured soil and a coarse-textured soil are used. The properties are based on the van Genuchten model. The flow domain has a recharge surface, a seepage boundary along the bottom, and a no-flow boundary along the sides. The uncertain variables are saturated water content, residual water content, van Genuchten model parameters alpha (α) and n, and saturated hydraulic conductivity. The objective is to evaluate the significance of each uncertain variable to the probabilistic flow. Under wet conditions, saturated water content and residual water content are the most significant uncertain variables in the sand. For dry conditions in the sand, however, the van Genuchten model parameters α and n are the most significant. Model parameter n and saturated hydraulic conductivity are the most significant for the wet clay loam. Saturated water content is most significant for the dry clay loam. Résumé. Un modèle d'écoulement variable en milieu saturé est couplé à un algorithme d'exactitude de premier ordre pour simuler les écoulements en milieu non saturé dans deux sols. Les propriétés des sols non saturés sont considérés comme des variables incertaines avec des moyennes, des écarts-types et des distributions de probabilité marginale. Ainsi chaque simulation constitue un événement d'écoulement non saturé probable. La sensibilité des variables incertaines est estimée pour chaque événement. Les propriétés hydrauliques non saturées d'un sol à texture fine et d'un sol à texture grossière sont utilisées. Les propriétés sont basées sur le modèle de van Genuchten. Le domaine d'écoulement possède une surface de recharge, une limite de fuite à sa base et des limites sans écoulement sur les côtés. Les variables incertaines sont la teneur en eau à saturation, la teneur en eau résiduelle, les paramètres alpha (α) et n du modèle de van Genuchten et la conductivité hydraulique à saturation. L'objectif est d'évaluer la signification de chacune des variables incertaines dans l'écoulement probabiliste. Dans des conditions humides, la teneur en eau à saturation et la teneur en eau résiduelle sont les variables incertaines les plus significatives dans le sable. Toutefois, dans des conditions sèches dans le sable, les paramètres α et n du modèle de van Genuchten sont les plus significatifs. Le paramètre n du modèle et la conductivité hydraulique à saturation sont les plus significatifs pour un sol argileux humide. La teneur en eau à saturation est très significative pour le sol argileux sec. Resumen. Se ha acoplado un modelo de flujo de saturación variable con un algoritmo de fiabilidad de primer orden con el fin de simular el flujo no saturado en dos tipos de suelos. Se ha tratado las propiedades del suelo no saturado como variables inciertas, a las que se asigna las medias, desviaciones estándar y distribuciones de probabilidad marginal correspondientes. Así, cada simulación constituye un evento probabilístico de flujo no saturado y la sensibilidad de las variables inciertas es estimada para cada evento. Se ha utilizado las propiedades de la conductividad hidráulica no saturada de dos suelos con dos tipos de textura - fina y gruesa - mediante el modelo de van Genuchten. El dominio de flujo está delimitado por una superficie de recarga, base de goteo y contornos laterales de flujo nulo. Las variables inciertas son el contenido de agua residual, el de saturación, los parámetros del modelo de van Genuchten (α y n) y la conductividad hidráulica saturada. El objetivo era evaluar la contribución de cada variable incierta al flujo probabilístico. Para arenas, las variables inciertas más importantes, en condiciones de humedad, son el contenido de agua residual y el de saturación en ausencia de humedad, lo son ambos parámetros del modelo de van Genuchten. Para margas arcillosas, las variables más significativas en condiciones húmedas son el parámetro n y la conductividad hidráulica saturada; en condiciones secas, el contenido de agua en saturación.

John Porter Book Prize Lecture: Bringing the Social Back In-On the Integration of Muslim Immigrants and the Jurisprudence of Muslim Minorities.

PubMed

Kazemipur, Abdolmohammad

2016-11-01

In much of the academic debate on the integration of Muslims into Western liberal democracies, Islam is often treated as one or the sole independent variable in the lives of Muslims. Offering to view Islam-or the understanding of Islam among Muslims-as the dependent variable, The Muslim Question in Canada discusses the influence of socioeconomic forces in shaping the Muslim immigrants' opinions, modes of thinking, and even interpretations of their faith. Drawing on this general approach, which is introduced and developed in the book using a variety of both quantitative and qualitative data, this article focuses on a school of thought within the Islamic jurisprudence known as fiqh al-aqalliyyat al-Muslema (the jurisprudence of Muslim minorities). The premise of the jurisprudence of Muslim minorities is that the lived realities of Muslims who reside in non-Muslim countries are so fundamentally different from those of the Muslim-majority nations that traditional Islamic jurisprudence cannot offer meaningful solutions for their problems. Therefore, there is a need to establish an entirely different jurisprudential approach centered around the lives of the Muslim minorities. The purpose of the bulk of jurisprudential theorization efforts in this line of reasoning is to facilitate the lives of the Muslim minorities; as well, they aim to create a foundation for the moral obligations of Muslims toward non-Muslims in such environments. I argue that a crucial element that triggers such a development is the existence of a positive relationship between Muslims and non-Muslims in immigrant-receiving countries. Souvent au sein des débats sur l'intégration des Musulmans dans des démocraties libérales de l'Ouest, l'Islam est traité comme un ou le seul enjeu dans la vie des fidèles. The Muslim Question in Canada examine l'Islam ou la compréhension de l'Islam chez les Musulmans comme un enjeu dépendent et aborde l'influence des forces socio-économiques sur les opinons des immigrants musulmans ainsi que sur leurs modes de pensée et même sur la manière dont ils interprètent leur foi. Inspiré par cette approche, que l'on présente et développe dans le livre, et qui se sert de données à la fois quantitatives et qualitatives, cet article se concentre sur une école de pensée à l'intérieur de la jurisprudence islamique, connue sous le nom de fiqh al aqalliyyat al-Muslema (la jurisprudence des minorités musulmanes). La prémisse de la jurisprudence des minorités musulmanes est que les réalités vécues par les Musulmans qui vivent dans des pays non-musulmans sont au fond tellement différentes de celles de la majorité musulmane que la jurisprudence traditionnelle ne présente pas de solutions pertinentes pour résoudre leurs problèmes. Ainsi, il faut établir une approche jurisprudentielle totalement différente, axée sur la vie des minorités musulmanes. L'objectif de la plupart des efforts au niveau de la théorisation de la jurisprudence qui adoptent cette vision est de rendre la vie des minorités musulmanes plus facile. Ces efforts tentent aussi de faire en sorte que les Musulmans ressentent une certaine obligation morale envers les non-Musulmans dans ces environnements. J'avance ici que l'aspect qui déclenche un tel développement est le rapport positif entre les Musulmans et les non-Musulmans dans les pays qui reçoivent des immigrants. © 2016 Canadian Sociological Association/La Société canadienne de sociologie.

Developpement d'une methode de Monte Carlo dependante du temps et application au reacteur de type CANDU-6

NASA Astrophysics Data System (ADS)

Mahjoub, Mehdi

La resolution de l'equation de Boltzmann demeure une etape importante dans la prediction du comportement d'un reacteur nucleaire. Malheureusement, la resolution de cette equation presente toujours un defi pour une geometrie complexe (reacteur) tout comme pour une geometrie simple (cellule). Ainsi, pour predire le comportement d'un reacteur nucleaire,un schema de calcul a deux etapes est necessaire. La premiere etape consiste a obtenir les parametres nucleaires d'une cellule du reacteur apres une etape d'homogeneisation et condensation. La deuxieme etape consiste en un calcul de diffusion pour tout le reacteur en utilisant les resultats de la premiere etape tout en simplifiant la geometrie du reacteur a un ensemble de cellules homogenes le tout entoure de reflecteur. Lors des transitoires (accident), ces deux etapes sont insuffisantes pour pouvoir predire le comportement du reacteur. Comme la resolution de l'equation de Boltzmann dans sa forme dependante du temps presente toujours un defi de taille pour tous types de geometries,un autre schema de calcul est necessaire. Afin de contourner cette difficulte, l'hypothese adiabatique est utilisee. Elle se concretise en un schema de calcul a quatre etapes. La premiere et deuxieme etapes demeurent les memes pour des conditions nominales du reacteur. La troisieme etape se resume a obtenir les nouvelles proprietes nucleaires de la cellule a la suite de la perturbation pour les utiliser, au niveau de la quatrieme etape, dans un nouveau calcul de reacteur et obtenir l'effet de la perturbation sur le reacteur. Ce projet vise a verifier cette hypothese. Ainsi, un nouveau schema de calcul a ete defini. La premiere etape de ce projet a ete de creer un nouveau logiciel capable de resoudre l'equation de Boltzmann dependante du temps par la methode stochastique Monte Carlo dans le but d'obtenir des sections efficaces qui evoluent dans le temps. Ce code a ete utilise pour simuler un accident LOCA dans un reacteur nucleaire de type CANDU-6. Les sections efficaces dependantes du temps ont ete par la suite utilisees dans un calcul de diffusion espace-temps pour un reacteur CANDU-6 subissant un accident de type LOCA affectant la moitie du coeur afin d'observer son comportement durant toutes les phases de la perturbation. Dans la phase de developpement, nous avons choisi de demarrer avec le code OpenMC, developpe au MIT,comme plateforme initiale de developpement. L'introduction et le traitement des neutrons retardes durant la simulation ont presente un grand defi a surmonter. Il est important de noter que le code developpe utilisant la methode Monte Carlo peut etre utilise a grande echelle pour la simulation de tous les types des reacteurs nucleaires si les supports informatiques sont disponibles.

A highly soluble matrix metalloproteinase-9 inhibitor for potential treatment of dry eye syndrome.

PubMed

Mori, Mattia; De Lorenzo, Emanuele; Torre, Eugenio; Fragai, Marco; Nativi, Cristina; Luchinat, Claudio; Arcangeli, Annarosa

2012-11-01

Dry eye syndrome (DES) or keratoconjunctivitis sicca is an eye disease caused by the chronic lack of lubrication and moisture of the eye. The pathogenesis of DES involves the over-expression and over-activity of corneal Matrix Metalloproteinase 9 (MMP-9). We propose herein a new, non-symptomatic approach for the treatment of DES based on the inhibition of MMP-9 by a new highly soluble molecule, designed as PES_103 that has been shown to inhibit MMP-9 both in vitro and in vivo. The efficacy of PES_103 in vivo and the potential benefits of this treatment in restoring tear production were studied in this work using an animal model of reduced lacrimation. PES_103 did not show any significant corneal toxicity. © 2012 The Authors Basic & Clinical Pharmacology & Toxicology © 2012 Nordic Pharmacological Society.

Risk-Based Tailoring of the Verification, Validation, and Accreditation/Acceptance Processes (Adaptation fondee sur le risque, des processus de verification, de validation, et d’accreditation/d’acceptation)

DTIC Science & Technology

2012-04-01

Systems Concepts and Integration SET Sensors and Electronics Technology SISO Simulation Interoperability Standards Organization SIW Simulation...conjunction with 2006 Fall SIW 2006 September SISO Standards Activity Committee approved beginning IEEE balloting 2006 October IEEE Project...019 published 2008 June Edinborough, UK Held in conjunction with 2008 Euro- SIW 2008 September Laurel, MD, US Work on Composite Model 2008 December

Developpement d'une commande pour une hydrolienne de riviere et optimisation =

NASA Astrophysics Data System (ADS)

Tetrault, Philippe

Suivant le developpement des energies renouvelables, la presente etude se veut une base theorique quant aux principes fondamentaux necessaires au bon fonctionnement et a l'implementation d'une hydrolienne de riviere. La problematique derriere ce nouveau type d'appareil est d'abord presentee. La machine electrique utilisee dans l'application, c'est-a-dire la machine synchrone a aimants permanents, est etudiee : ses equations dynamiques mecaniques et electriques sont developpees, introduisant en meme temps le concept de referentiel tournant. Le fonctionnement de l'onduleur utilise, soit un montage en pont complet a deux niveaux a semi-conducteurs, est explique et mit en equation pour permettre de comprendre les strategies de modulation disponibles. Un bref historique de ces strategies est fait avant de mettre l'emphase sur la modulation vectorielle qui sera celle utilisee pour l'application en cours. Les differents modules sont assembles dans une simulation Matlab pour confirmer leur bon fonctionnement et comparer les resultats de la simulation avec les calculs theoriques. Differents algorithmes permettant de traquer et maintenir un point de fonctionnement optimal sont presentes. Le comportement de la riviere est etudie afin d'evaluer l'ampleur des perturbations que le systeme devra gerer. Finalement, une nouvelle approche est presentee et comparee a une strategie plus conservatrice a l'aide d'un autre modele de simulation Matlab.

Methodologie de conception numerique d'un ventilateur helico-centrifuge basee sur l'emploi du calcul meridien

NASA Astrophysics Data System (ADS)

Lallier-Daniels, Dominic

La conception de ventilateurs est souvent basée sur une méthodologie « essais/erreurs » d'amélioration de géométries existantes ainsi que sur l'expérience de design et les résultats expérimentaux cumulés par les entreprises. Cependant, cette méthodologie peut se révéler coûteuse en cas d'échec; même en cas de succès, des améliorations significatives en performance sont souvent difficiles, voire impossibles à obtenir. Le projet présent propose le développement et la validation d'une méthodologie de conception basée sur l'emploi du calcul méridien pour la conception préliminaire de turbomachines hélico-centrifuges (ou flux-mixte) et l'utilisation du calcul numérique d'écoulement fluides (CFD) pour la conception détaillée. La méthode de calcul méridien à la base du processus de conception proposé est d'abord présentée. Dans un premier temps, le cadre théorique est développé. Le calcul méridien demeurant fondamentalement un processus itératif, le processus de calcul est également présenté, incluant les méthodes numériques de calcul employée pour la résolution des équations fondamentales. Une validation du code méridien écrit dans le cadre du projet de maîtrise face à un algorithme de calcul méridien développé par l'auteur de la méthode ainsi qu'à des résultats de simulation numérique sur un code commercial est également réalisée. La méthodologie de conception de turbomachines développée dans le cadre de l'étude est ensuite présentée sous la forme d'une étude de cas pour un ventilateur hélico-centrifuge basé sur des spécifications fournies par le partenaire industriel Venmar. La méthodologie se divise en trois étapes: le calcul méridien est employé pour le pré-dimensionnement, suivi de simulations 2D de grilles d'aubes pour la conception détaillée des pales et finalement d'une analyse numérique 3D pour la validation et l'optimisation fine de la géométrie. Les résultats de calcul méridien sont en outre comparés aux résultats de simulation pour la géométrie 3D afin de valider l'emploi du calcul méridien comme outil de prédimensionnement. Mots-clés Turbomachines hélico-centrifuges, Calcul méridien, Simulation numérique d'écoulement fluide, Conception numérique de turbomachines.

Modeling rheumatoid arthritis using different techniques - a review of model construction and results.

PubMed

Scholz, Stefan; Mittendorf, Thomas

2014-12-01

Rheumatoid arthritis (RA) is a chronic, inflammatory disease with severe effects on the functional ability of patients. Due to the prevalence of 0.5 to 1.0 percent in western countries, new treatment options are a major concern for decision makers with regard to their budget impact. In this context, cost-effectiveness analyses are a helpful tool to evaluate new treatment options for reimbursement schemes. To analyze and compare decision analytic modeling techniques and to explore their use in RA with regard to their advantages and shortcomings. A systematic literature review was conducted in PubMED and 58 studies reporting health economics decision models were analyzed with regard to the modeling technique used. From the 58 reviewed publications, we found 13 reporting decision tree-analysis, 25 (cohort) Markov models, 13 publications on individual sampling methods (ISM) and seven discrete event simulations (DES). Thereby 26 studies were identified as presenting independently developed models and 32 models as adoptions. The modeling techniques used were found to differ in their complexity and in the number of treatment options compared. Methodological features are presented in the article and a comprehensive overview of the cost-effectiveness estimates is given in Additional files 1 and 2. When compared to the other modeling techniques, ISM and DES have advantages in the coverage of patient heterogeneity and, additionally, DES is capable to model more complex treatment sequences and competing risks in RA-patients. Nevertheless, the availability of sufficient data is necessary to avoid assumptions in ISM and DES exercises, thereby enabling biased results. Due to the different settings, time frames and interventions in the reviewed publications, no direct comparison of modeling techniques was applicable. The results from other indications suggest that incremental cost-effective ratios (ICERs) do not differ significantly between Markov and DES models, but DES is able to report more outcome parameters. Given a sufficient data supply, DES is the modeling technique of choice when modeling cost-effectiveness in RA. Otherwise transparency on the data inputs is crucial for valid results and to inform decision makers about possible biases. With regard to ICERs, Markov models might provide similar estimates as more advanced modeling techniques.

Numerical investigation of flow structure and pressure pulsation in the Francis-99 turbine during startup

NASA Astrophysics Data System (ADS)

Minakov, A.; Sentyabov, A.; Platonov, D.

2017-01-01

We performed numerical simulation of flow in a laboratory model of a Francis hydroturbine at startup regimes. Numerical technique for calculating of low frequency pressure pulsations in a water turbine is based on the use of DES (k-ω Shear Stress Transport) turbulence model and the approach of “frozen rotor”. The structure of the flow behind the runner of turbine was analysed. Shows the effect of flow structure on the frequency and intensity of non-stationary processes in the flow path. Two version of the inlet boundary conditions were considered. The first one corresponded measured time dependence of the discharge. Comparison of the calculation results with the experimental data shows the considerable delay of the discharge in this calculation. Second version corresponded linear approximation of time dependence of the discharge. This calculation shows good agreement with experimental results.

Modelisation de la diffusion sur les surfaces metalliques: De l'adatome aux processus de croissance

NASA Astrophysics Data System (ADS)

Boisvert, Ghyslain

Cette these est consacree a l'etude des processus de diffusion en surface dans le but ultime de comprendre, et de modeliser, la croissance d'une couche mince. L'importance de bien mai triser la croissance est primordiale compte tenu de son role dans la miniaturisation des circuits electroniques. Nous etudions ici les surface des metaux nobles et de ceux de la fin de la serie de transition. Dans un premier temps, nous nous interessons a la diffusion d'un simple adatome sur une surface metallique. Nous avons, entre autres, mis en evidence l'apparition d'une correlation entre evenements successifs lorsque la temperature est comparable a la barriere de diffusion, i.e., la diffusion ne peut pas etre associee a une marche aleatoire. Nous proposons un modele phenomenologique simple qui reproduit bien les resultats des simulations. Ces calculs nous ont aussi permis de montrer que la diffusion obeit a la loi de Meyer-Neldel. Cette loi stipule que, pour un processus active, le prefacteur augmente exponentiellement avec la barriere. En plus, ce travail permet de clarifier l'origine physique de cette loi. En comparant les resultats dynamiques aux resultats statiques, on se rend compte que la barriere extraite des calculs dynamiques est essentiellement la meme que celle obtenue par une approche statique, beaucoup plus simple. On peut donc obtenir cette barriere a l'aide de methodes plus precises, i.e., ab initio, comme la theorie de la fonctionnelle de la densite, qui sont aussi malheureusement beaucoup plus lourdes. C'est ce que nous avons fait pour plusieurs systemes metalliques. Nos resultats avec cette derniere approche se comparent tres bien aux resultats experimentaux. Nous nous sommes attardes plus longuement a la surface (111) du platine. Cette surface regorge de particularites interessantes, comme la forme d'equilibre non-hexagonale des i lots et deux sites d'adsorption differents pour l'adatome. De plus, des calculs ab initio precedents n'ont pas reussi a confirmer la forme d'equilibre et surestiment grandement la barriere. Nos calculs, plus complets et dans un formalisme mieux adapte a ce genre de probleme, predisent correctement la forme d'equilibre, qui est en fait due a un relachement different du stress de surface aux deux types de marches qui forment les cotes des i lots. Notre valeur pour la barriere est aussi fortement diminuee lorsqu'on relaxe les forces sur les atomes de la surface, amenant le resultat theorique beaucoup plus pres de la valeur experimentale. Nos calculs pour le cuivre demontre en effet que la diffusion de petits i lots pendant la croissance ne peut pas etre negligee dans ce cas, mettant en doute la valeur des interpretations des mesures experimentales. (Abstract shortened by UMI.)

F-16XL Hybrid Reynolds-Averaged Navier-Stokes/Large Eddy Simulation on Unstructured Grids

NASA Technical Reports Server (NTRS)

Park, Michael A.; Abdol-Hamid, Khaled S.; Elmiligui, Alaa

2015-01-01

This study continues the Cranked Arrow Wing Aerodynamics Program, International (CAWAPI) investigation with the FUN3D and USM3D flow solvers. CAWAPI was established to study the F-16XL, because it provides a unique opportunity to fuse fight test, wind tunnel test, and simulation to understand the aerodynamic features of swept wings. The high-lift performance of the cranked-arrow wing planform is critical for recent and past supersonic transport design concepts. Simulations of the low speed high angle of attack Flight Condition 25 are compared: Detached Eddy Simulation (DES), Modi ed Delayed Detached Eddy Simulation (MDDES), and the Spalart-Allmaras (SA) RANS model. Iso- surfaces of Q criterion show the development of coherent primary and secondary vortices on the upper surface of the wing that spiral, burst, and commingle. SA produces higher pressure peaks nearer to the leading-edge of the wing than flight test measurements. Mean DES and MDDES pressures better predict the flight test measurements, especially on the outer wing section. Vorticies and vortex-vortex interaction impact unsteady surface pressures. USM3D showed many sharp tones in volume points spectra near the wing apex with low broadband noise and FUN3D showed more broadband noise with weaker tones. Spectra of the volume points near the outer wing leading-edge was primarily broadband for both codes. Without unsteady flight measurements, the flight pressure environment can not be used to validate the simulations containing tonal or broadband spectra. Mean forces and moment are very similar between FUN3D models and between USM3D models. Spectra of the unsteady forces and moment are broadband with a few sharp peaks for USM3D.

Improving primary palliative care in Scotland: lessons from a mixed methods study.

PubMed

Mason, Bruce; Buckingham, Susan; Finucane, Anne; Hutchison, Peter; Kendall, Marilyn; McCutcheon, Hazel; Porteous, Lorna; Murray, Scott A

2015-12-10

Since 2012, all GP practices across Scotland have been supported to take a systematic approach to end-of-life care, by helping them to identify more patients for palliative care through a Palliative Care Directed Enhanced Service (DES). We aimed to understand the impact of this initiative. Routine quantitative data from the 2012/13, and 2013/14 DES were collected from regional health boards, analysed and discussed. Qualitative data were collected from a sample of 2012/13 DES returns and analysed using Thematic Analysis. Data were received from 512 practices in nine Scottish Health boards for the 2012-13 DES and 638 practices in 11 Health boards for 2013-14. A sample of 90 of the returns for 2012-13 was selected for qualitative analysis. In 2012-13, 72 % of patients who died of cancer were listed on the palliative care register (PCR) before death while 27 % of patients who died as a result of non-malignant conditions were listed on the PCR. In 2013-14, cancer identification remained the same but identification of people dying with other long-term conditions had improved to 32.5 %. We identified several key issues needed to improve palliative care in the community. The need for training to identify patients with palliative care needs (particularly non-cancer); communication skills training; improvements in sharing information across the NHS; under-resource of and lack of coordination with district nurses; improvements in information technology; and tools for working with enlarged palliative care registers. The DES helped more patients with long-term conditions (LTC) receive generalist palliative care. Approaching generalist palliative care as anticipatory care could facilitate communication between GPs and patients/families and remove some barriers to early identification of palliative care needs. Improvement of information technology and use of identification tools like the SPICT™ may improve professionals' communication with each other and help may make identification and management of patients easier.

Analysis of the pump-turbine S characteristics using the detached eddy simulation method

NASA Astrophysics Data System (ADS)

Sun, Hui; Xiao, Ruofu; Wang, Fujun; Xiao, Yexiang; Liu, Weichao

2015-01-01

Current research on pump-turbine units is focused on the unstable operation at off-design conditions, with the characteristic curves in generating mode being S-shaped. Unlike in the traditional water turbines, pump-turbine operation along the S-shaped curve can lead to difficulties during load rejection with unusual increases in the water pressure, which leads to machine vibrations. This paper describes both model tests and numerical simulations. A reduced scale model of a low specific speed pump-turbine was used for the performance tests, with comparisons to computational fluid dynamics(CFD) results. Predictions using the detached eddy simulation(DES) turbulence model, which is a combined Reynolds averaged Naviers-Stokes(RANS) and large eddy simulation(LES) model, are compared with the two-equation turbulence mode results. The external characteristics as well as the internal flow are for various guide vane openings to understand the unsteady flow along the so called S characteristics of a pump-turbine. Comparison of the experimental data with the CFD results for various conditions and times shows that DES model gives better agreement with experimental data than the two-equation turbulence model. For low flow conditions, the centrifugal forces and the large incident angle create large vortices between the guide vanes and the runner inlet in the runner passage, which is the main factor leading to the S-shaped characteristics. The turbulence model used here gives more accurate simulations of the internal flow characteristics of the pump-turbine and a more detailed force analysis which shows the mechanisms controlling of the S characteristics.

Analysis of Massively Separated Flows of Aircraft Using Detached Eddy Simulation

NASA Astrophysics Data System (ADS)

Morton, Scott

2002-08-01

An important class of turbulent flows of aerodynamic interest are those characterized by massive separation, e.g., the flow around an aircraft at high angle of attack. Numerical simulation is an important tool for analysis, though traditional models used in the solution of the Reynolds-averaged Navier-Stokes (RANS) equations appear unable to accurately account for the time-dependent and three-dimensional motions governing flows with massive separation. Large-eddy simulation (LES) is able to resolve these unsteady three-dimensional motions, yet is cost prohibitive for high Reynolds number wall-bounded flows due to the need to resolve the small scale motions in the boundary layer. Spalart et. al. proposed a hybrid technique, Detached-Eddy Simulation (DES), which takes advantage of the often adequate performance of RANS turbulence models in the "thin," typically attached regions of the flow. In the separated regions of the flow the technique becomes a Large Eddy Simulation, directly resolving the time-dependent and unsteady features that dominate regions of massive separation. The current work applies DES to a 70 degree sweep delta wing at 27 degrees angle of attack, a geometrically simple yet challenging flowfield that exhibits the unsteady three-dimensional massively separated phenomena of vortex breakdown. After detailed examination of this basic flowfield, the method is demonstrated on three full aircraft of interest characterized by massive separation, the F-16 at 45 degrees angle of attack, the F-15 at 65 degree angle of attack (with comparison to flight test), and the C-130 in a parachute drop condition at near stall speed with cargo doors open.

Class Position and Musical Tastes: A Sing-Off between the Cultural Omnivorism and Bourdieusian Homology Frameworks.

PubMed

Veenstra, Gerry

2015-05-01

The longstanding debate between the homology and omnivorism approaches to the class bases of cultural tastes and practices rages on in cultural sociology. The homology thesis claims that class positions throughout the class hierarchy are accompanied by specified cultural tastes and specialized modes of appreciating them while the cultural omnivorism thesis contends that elites are (increasingly) characterized by a breadth of cultural tastes of any and all kinds. This study tests the applicability of these theses to musical tastes in Canada through the application of multiple correspondence analysis, latent class analysis, and logistic regression modeling to original telephone survey data (n = 1,595) from Toronto and Vancouver. I find that musical omnivorism, an appreciation for diverse musical styles, is not dispersed along class lines. Instead I find a homology between class position and musical tastes that designates blues, choral, classical, jazz, musical theater, opera, pop, reggae, rock, and world/international as relatively highbrow and country, disco, easy listening, golden oldies, heavy metal, and rap as relatively lowbrow. Of the highbrow tastes, all but jazz are disliked by lower class people, and of the lowbrow tastes, country, easy listening, and golden oldies are concurrently disliked by higher class people. Consistent with the homology thesis, it appears that class position is aligned with specific musical likes and dislikes. Le vieux débat entre les approches de l'homologie et de l'omnivorisme aux bases des classes des goûts et des pratiques culturels fait rage dans la sociologie culturelle. La thèse de l'homologie prétend que les positions des classes à travers la hiérarchie des classes sont accompagnées par des goûts culturels spécifiés et des modes spécialisés permettant leur appréciation. La thèse de l'omnivorisme culturel, en revanche, soutient que les élites sont (de plus en plus) caractérisées par un éventail de goûts culturels de toutes sortes. Cette étude expérimente l'applicabilité de ces thèses aux goûts musicaux au Canada à travers l'application de l'analyse des correspondances multiples, de l'analyse des classes latentes et du modèle de régression logistique aux données d'origine de l'étude collectées par téléphone (n = 1,595) de Toronto et de Vancouver. Je me rends compte que l'omnivorisme musical, une appréciation de styles musicaux divers, n'est pas dispersé le long des classes sociales. Bien au contraire, je trouve qu'il existe une homologie entre la position des classes et les goûts musicaux qui désigne les blues, la chorale, la musique classique, le jazz, le théâtre musical, l'opéra, la pop, le reggae, le rock et la musique du monde/internationale comme des styles des classes au niveau intellectuel relativement élevé. Cette homologie désigne la country, la disco, la musique d'ambiance, les anciens succès, le heavy metal et le rap comme des styles des classes au niveau intellectuel relativement bas. Des goûts des classes au niveau intellectuel élevé, tous les styles à l'exception du jazz ne sont pas appréciés de la basse classe. De même, des goûts des classes au niveau intellectuel bas, le country, la musique d'ambiance et les anciens succès ne sont pas appréciés de la haute classe. Selon la thèse de l'homologie, il apparaît que la position des classes est fonction des préférences et des aversions musicales spécifiques. © 2015 Canadian Sociological Association/La Société canadienne de sociologie.

Turbomachinery Design Using CFD (La Conception des Turbomachines par l’Aerodynamique Numerique).

DTIC Science & Technology

1994-05-01

Method for Flow Calculations in Turbomachines", Vrije Thompkins, W.T.,1981, "A Fortran Program for Calcu- Univ.Brussel, Dienst Stromingsmechanica, VUB- STR ...Model Equation for Simulating Flows in mung um Profile Multistage Turbomachinery MBB-Bericht Nr. UFE 1352, 1977 ASME paper 85-GT-226, Houston, March

Zuverlässigkeit digitaler Schaltungen unter Einfluss von intrinsischem Rauschen

NASA Astrophysics Data System (ADS)

Kleeberger, V. B.; Schlichtmann, U.

2011-08-01

Die kontinuierlich fortschreitende Miniaturisierung in integrierten Schaltungen führt zu einem Anstieg des intrinsischen Rauschens. Um den Einfluss von intrinsischem Rauschen auf die Zuverlässigkeit zukünftiger digitaler Schaltungen analysieren zu können, werden Methoden benötigt, die auf CAD-Verfahren wie Analogsimulation statt auf abschätzenden Berechnungen beruhen. Dieser Beitrag stellt eine neue Methode vor, die den Einfluss von intrinsischem Rauschen in digitalen Schaltungen für eine gegebene Prozesstechnologie analysieren kann. Die Amplituden von thermischen, 1/f und Schrotrauschen werden mit Hilfe eines SPICE Simulators bestimmt. Anschließend wird der Einfluss des Rauschens auf die Schaltungszuverlässigkeit durch Simulation analysiert. Zusätzlich zur Analyse werden Möglichkeiten aufgezeigt, wie die durch Rauschen hervorgerufenen Effekte im Schaltungsentwurf mit berücksichtigt werden können. Im Gegensatz zum Stand der Technik kann die vorgestellte Methode auf beliebige Logikimplementierungen und Prozesstechnologien angewendet werden. Zusätzlich wird gezeigt, dass bisherige Ansätze den Einfluss von Rauschen bis um das Vierfache überschätzen.

The Origin of Inlet Buzz in a Mach 1.7 Low Boom Inlet Design

NASA Technical Reports Server (NTRS)

Anderson, Bernhard H.; Weir, Lois

2014-01-01

Supersonic inlets with external compression, having a good level performance at the critical operating point, exhibit a marked instability of the flow in some subcritical operation below a critical value of the capture mass flow ratio. This takes the form of severe oscillations of the shock system, commonly known as "buzz". The underlying purpose of this study is to indicate how Detached Eddy Simulation (DES) analysis of supersonic inlets will alter how we envision unsteady inlet aerodynamics, particularly inlet buzz. Presented in this paper is a discussion regarding the physical explanation underlying inlet buzz as indicated by DES analysis. It is the normal shock wave boundary layer separation along the spike surface which reduces the capture mass flow that is the controlling mechanism which determines the onset of inlet buzz, and it is the aerodynamic characteristics of a choked nozzle that provide the feedback mechanism that sustains the buzz cycle by imposing a fixed mean corrected inlet weight flow. Comparisons between the DES analysis of the Lockheed Martin Corporation (LMCO) N+2 inlet and schlieren photographs taken during the test of the Gulfstream Large Scale Low Boom (LSLB) inlet in the NASA 8x6 ft. Supersonic Wind Tunnel (SWT) show a strong similarity both in turbulent flow field structure and shock wave formation during the buzz cycle. This demonstrates the value of DES analysis for the design and understanding of supersonic inlets.

Le Phénomène Wolf-Rayet au Sein des Etoiles chaudes de Populations I et II: Histoire des Vents stellaires et Impact sur la Structure nébulaire circumstellaire

NASA Astrophysics Data System (ADS)

Grosdidier, Yves

2000-12-01

Les spectres des étoiles Wolf-Rayet pop. I (WR) présentent de larges raies en émission dues à des vents stellaires chauds en expansion rapide (vitesse terminale de l'ordre de 1000 km/s). Le modèle standard des étoiles WR reproduit qualitativement le profil général et l'intensité des raies observées. Mais la spectroscopie intensive à moyenne résolution de ces étoiles révèle l'existence de variations stochastiques dans les raies (sous-pics mobiles en accélération échelles de temps: environ 10-100 min.). Ces variations ne sont pas comprises dans le cadre du modèle standard et suggèrent une fragmentation intrinsèque des vents. Cette thèse de doctorat présente une étude de la variabilité des raies spectrales en émission des étoiles WR pop. II; la question de l'impact d'un vent WR fragmenté sur le milieu circumstellaire est aussi étudiée: 1) à partir du suivi spectroscopique intensif des raies CIIIl5696 et CIVl5801/12, nous analysons quantitativement (via le calcul des Spectres de Variance Temporelle) les vents issus de 5 étoiles centrales de nébuleuses planétaires (NP) galactiques présentant le phénomène WR; 2) nous étudions l'impact de la fragmentation des vents issus de deux étoiles WR pop. I sur le milieu circumstellaire via: i) l'imagerie IR (NICMOS2/HST) de WR 137, et ii) l'imagerie H-alpha (WFPC2/HST) et l'interférométrie Fabry-Perot H-alpha (SIS-CFHT) de la nébuleuse M 1-67 (étoile centrale: WR 124). Les principaux résultats sont les suivants: VENTS WR POP. II: (1) Nous démontrons la variabilité spectroscopique intrinsèque des vents issus des noyaux de NP HD 826 ([WC 8]), BD +30 3639 ([WC 9]) et LSS 3169 ([WC 9]), observés durant respectivement 22, 15 et 1 nuits, et rapportons des indications de variabilité pour les noyaux [WC 9] HD 167362 et He 2-142. Les variabilités de HD 826 et BD +30 3639 apparaissent parfois plus soutenues (``bursts'' qui se maintiennent durant plusieurs nuits); (2) La cinématique des sous-pics de BD +30 3639 suggère une anisotropie transitoire de la distribution des fragments dans le vent; (3) Le phénomène WR apparaît purement atmosphérique: la cinématique des sous-pics, les amplitudes et les échelles de temps caractéristiques des variations, ainsi que les accélérations observées sont similaires pour les deux populations. Mais, pour HD 826, une accélération maximale d'environ 70 m/s2 est détectée, valeur significativement plus importante que celles rapportées pour les autres étoiles WR pop. I & II (environ 15 m/s2). La petitesse du rayon de HD 826 en serait la cause; (4) Comme pour les WR pop. I, de grands paramètres (β supérieur ou égal à 3-10) sont requis pour ajuster les accélérations observées avec une loi de vitesse de type beta. La loi beta sous-estime systématiquement les gradients de vitesse au sein de la région de formation de la raie CIIIl5696; (5) Les vents WR pop. II étant fragmentés, l'estimation des taux de perte de masse actuels à partir de méthodes supposant les atmosphères homogènes conduit à une surestimation i) des taux de perte de masse eux-mêmes, et ii) des masses initiales des étoiles avant qu'elles n'entrent dans la phase WR. IMPACT DES VENTS: (1) Au périastre, de la poussière est détectée dans l'environnement de la binaire WC+OB WR 137. La formation de poussières est soit facilitée, soit provoquée par la collision des deux vents chauds; le rôle capital de la fragmentation des vents (fournissant une compression localisée supplémentaire du plasma) est suggéré (2) La nébuleuse M 1-67 affiche une interaction avec le milieu interstellaire (MIS) non-négligeable (``bow-shock''). Les champs de densité et de vitesse sont très perturbés. Ces perturbations sont reliées, d'une part, à l'histoire des vents issus de WR 124 durant sa propre évolution, d'autre part, à l'interaction avec le MIS. Les fonctions de structure des champs de densitéet de vitesse de M 1-67 ne révèlent aucun indice en faveur d'une turbulence au sein de la nébuleuse (3) Des simulations hydrodynamiques 2D réalisées avec le code ZEUS-3D montrent qu'un fragment dense formé près du coeur hydrostatique stellaire ne peut probablement pas, sans adjoindre les effets de bouclier et de confinement radiatifs, atteindre des distances nébulaires.

Recherche d'une politique de gestion des stocks d'eau de barrages-réservoirs en vue de soutenir les étiages. 2. Utilisation d'un modèle alterné annuel apports-déficits pour la recherche des conditions de gestion

NASA Astrophysics Data System (ADS)

Bocquillon, C.; Masson, J. M.

1983-01-01

In the upper catchment of the River Loire, France, the construction of five reservoir dams has been planned to sustain the low flows in the Loire valley. The management of these reservoirs, to be built successively, must be approached from partial or complete points of view in order to establish the daily draft decisions at every stage of the project. A hydrological criteria concerning the low flows at a station in the valley (namely the "objective point") is used to judge the results. It is possible to determine the optimal carry-over storage for this criterion with the use of a long series of simulated inflows to reservoirs and annual deficits, when the future conditions are presumed to be known. The statistical analysis of the results helps in the formulation of the objectives for long-term Q1 assuring the carry-over storage for a predetermined risk of failure. This objective for long-term Q1 will not hold good if the low flow is severe. Thus some deterministic and statistical hypotheses have been used to formulate an objective for the mean term of flow Q2 ( tj) which is calculated each day tj and adjusted to the hydrological conditions of the year. The target draft Cb at the objective point is the minimum of the pair [( Q1, Q2 ( tj)]. Water is discharged each day to meet this target flow, while maintaining all the constraints of the flows downstream to the reservoirs. It takes into account the time needed for transfer of water and permits a good prediction of either the flow propagation in the upper watershed or the evolution of the inflows from downstream catchments. A modular model is used to calculate the daily flow. The results obtained from simulation were satisfactory.

Modelling the angular correlation function and its full covariance in photometric galaxy surveys

NASA Astrophysics Data System (ADS)

Crocce, Martín; Cabré, Anna; Gaztañaga, Enrique

2011-06-01

Near-future cosmology will see the advent of wide-area photometric galaxy surveys, such as the Dark Energy Survey (DES), that extend to high redshifts (z˜ 1-2) but give poor radial distance resolution. In such cases splitting the data into redshift bins and using the angular correlation function w(θ), or the Cℓ power spectrum, will become the standard approach to extracting cosmological information or to studying the nature of dark energy through the baryon acoustic oscillations (BAO) probe. In this work we present a detailed model for w(θ) at large scales as a function of redshift and binwidth, including all relevant effects, namely non-linear gravitational clustering, bias, redshift space distortions and photo-z uncertainties. We also present a model for the full covariance matrix, characterizing the angular correlation measurements, that takes into account the same effects as for w(θ) and also the possibility of a shot-noise component and partial sky coverage. Provided with a large-volume N-body simulation from the MICE collaboration, we built several ensembles of mock redshift bins with a sky coverage and depth typical of forthcoming photometric surveys. The model for the angular correlation and the one for the covariance matrix agree remarkably well with the mock measurements in all configurations. The prospects for a full shape analysis of w(θ) at BAO scales in forthcoming photometric surveys such as DES are thus very encouraging.

La cryomicroélectronique

NASA Astrophysics Data System (ADS)

Kamarinos, Georges

1991-02-01

The Integrated Circuits and the microelectronics devices working in temperatures lower than 100 K are studied by cryomicroelectronics. In this short review paper the development of this new branch of microelectronics is described. Particularly the advantages and the drawbacks of the cooling of integrated circuits and devices are listed. Then the current research axis are given. They correspond to two different approaches ; the " classic " one which is based to the materials used in the present VLSI technology and the innovative way which aims at using new HT_c superconductors. L'objet de la cryomicroélectronique est l'étude des Circuits Intégrés et des composants microélectroniques à des températures inférieures à 100 K. Cet article de revue décrit très brièvement l'état d'avancement des connaissances relatives aux avantages et aux inconvénients des composants et Circuits Intégrés au Silicium fonctionnant à basse température. Ensuite on expose les axes de recherche actuels ; ils sont relatifs à deux approches : l'une, classique, est basée sur les matériaux utilisés actuellement dans la technologie de l'intégration à grande échelle; l'autre, novatrice, vise à utiliser les matériaux supraconducteurs à haute température critique.

Avant-Propos

NASA Astrophysics Data System (ADS)

Ollivier, J.; Farhi, E.; Ferrand, M.; Benoit, M.

2005-11-01

L'École Thématique “Neutrons et Biologie” s'est tenue du 22 au 26 Mai 2004 à Praz/Arly (Haute-Savoie, France), dans le cadre des 12 èmes Journees de la Diffusion Neutronique de la Societe Française de Neutronique. Cette école a ete organisee avec le concours financier du CNRS (formation permanente), du Laboratoire Léon Brillouin (CEA Saclay), de la region Rhône-Alpes, du conseil général de Haute-Savoie et de l'Université Joseph Fourier de Grenoble. Une cinquantaine de participants, dont une vingtaine d'intervenants, ont largement contribué à la réussite de l'École. D'un point de vue scientifique, l'École s'est déclinée en sept sessions thématiques majeures: - une première session introductive a été consacrée à une revue globale des méthodes biophysiques ayant un fort impact pour l'étude de la structure et de la dynamique des macromolécules biologiques (J. Parello). Un accent tout particulier à été apporté pour décrire les neutrons en tant que composante importante de la panoplie des techniques couramment utilisées en biophysique moléculaire (J. Schweitzer). - une session dédiée aux mesures dynamiques par diffusion incohérente de neutrons a été largement developpée. Qu'ils s'agissent de vibrations et de relaxations moléculaires dans les protéines (J.M. Zanotti), de dynamique globale des protéines (G. Zaccaï), ainsi que de dynamique de l'eau d'hydratation (F. Gabel), de nombreux exemples ont permis d'illustrer la pertinence des neutrons pour étudier la dynamique fonctionnelle des protéines sur l'échelle de temps picosecond nanoseconde. L'analyse des données de diffusion inélastique de neutrons ne peut se passer de modélisation théorique analytique des propriétés dynamique des biomolécules (D. Bicout). - une large place avait été réservée aux études structurales en biologie. Cette troisième session a rassemblé des contributions en diffusion aux petits angles de neutrons pour l'étude structurale en solution (D. Lairez), en réflectométrie de neutrons pour l'étude de systèmes des membranes ou de protéines en interaction avec des membranes (G. Fragneto), ainsi qu'en diffraction de fibres appliquée à l'étude de l'ADN (T. Forsyth). - les simulations de dynamique moléculaire constituent une méthode théorique unique pour étudier, au niveau atomique, les mouvements internes des macromolécules biologiques, que ce soit à l'équilibre (G. Kneller, S. Crouzy) ou hors équilibre (B. Gilquin). Les trajectoires de dynamique moléculaire s'étendent aujourd'hui à la centaine de nanosecondes, et peuvent être de ce fait utilisées par certains programmes pour calculer les observables expérimentales fournies par la diffusion de neutrons (G. Kneller, T. Hinsen). - l'ouverture des neutrons à des techniques instrumentales permettant d'approcher, d'une part, des états hors-équilibre par le biais d'études cinétiques couplées à des mélanges rapides pour des études de croissance de phases (I. Grillo) ou de repliement de protéines, d'autre part, des conditions expérimentales extrèmes (hautes-pressions, M. Plazanet), nous ont semblé constituer des émergences prometteuses. À ce titre, une revue sur le repliement des protéines (V. Forge) a précisé l'importance de nombreuses techniques (fluorescence intrinsèque, dichroïsme, infra-rouge, RMN) dans le domaine, tout en permettant d'entrevoir l'intérêt des études par neutrons. - en marge des sessions purement “neutrons”, il nous semblait important de pouvoir présenter des techniques et méthodes souvent reconnues comme très complémentaires des neutrons, en privilégiant un volet “études structurales” et un volet “études dynamiques”. Côté méthodes dynamiques, la RMN (M. Blackledge) a été positionnée comme une technique permettant d'étudier la flexibilité moléculaire sur des echelles de temps plus lentes (ms). Côté méthodes structurales, la bio-cristallographie des RX appliquée à l'études des structures virales (P. Gouet) a permis de mettre en évidence des aspects complémentaires entre RX et neutrons, et de souligner les avantages et inconvenients respectifs de ces techniques. - l'École Thématique s'est achevée par une session commune avec les Journées Rossat-Mignod, au cours de laquelle J. Helliwell a établi une revue comparative RX/neutrons sur les développements récents en bio-cristallographie des protéines, suivi de deux presentations portant sur la dynamique incohérente et cohérente de systèmes membranaires (F. Natali, M. Rheinstadter). Contrairement aux années précédentes, le contenu de cet ouvrage se veut davantage refléter les applications des neutrons en biologie et biophysique moléculaire, en se reportant à des travaux scientifiques précis, plutôt que d'être constitué d'un recueil de cours, certes trés pédagogiques, mais quelquefois trop éloignés de l'expérience. Nous espérons que ce choix saura satisfaire le lecteur et encourager de nouveaux biologistes à utiliser les neutrons dès que possible pour leurs systèmes d'intérêt. Bonne lecture et bonnes manips !!!!

Signal Sensing and Transduction by Histidine Kinases as Unveiled through Studies on a Temperature Sensor.

PubMed

Abriata, Luciano A; Albanesi, Daniela; Dal Peraro, Matteo; de Mendoza, Diego

2017-06-20

Histidine kinases (HK) are the sensory proteins of two-component systems, responsible for a large fraction of bacterial responses to stimuli and environmental changes. Prototypical HKs are membrane-bound proteins that phosphorylate cognate response regulator proteins in the cytoplasm upon signal detection in the membrane or periplasm. HKs stand as potential drug targets but also constitute fascinating systems for studying proteins at work, specifically regarding the chemistry and mechanics of signal detection, transduction through the membrane, and regulation of catalytic outputs. In this Account, we focus on Bacillus subtilis DesK, a membrane-bound HK part of a two-component system that maintains appropriate membrane fluidity at low growth temperatures. Unlike most HKs, DesK has no extracytoplasmic signal-sensing domains; instead, sensing is carried out by 10 transmembrane helices (coming from two protomers) arranged in an unknown structure. The fifth transmembrane helix from each protomer connects, without any of the intermediate domains found in other HKs, into the dimerization and histidine phosphotransfer (DHp) domain located in the cytoplasm, which is followed by the ATP-binding domains (ABD). Throughout the years, genetic, biochemical, structural, and computational studies on wild-type, mutant, and truncated versions of DesK allowed us to dissect several aspects of DesK's functioning, pushing forward a more general understanding of its own structure/function relationships as well as those of other HKs. We have shown that the sensing mechanism is rooted in temperature-dependent membrane properties, most likely a combination of thickness, fluidity, and water permeability, and we have proposed possible mechanisms by which DesK senses these properties and transduces the signals. X-ray structures and computational models have revealed structural features of TM and cytoplasmic regions in DesK's kinase- and phosphatase-competent states. Biochemical and genetic experiments and molecular simulations further showed that reversible formation of a two-helix coiled coil in the fifth TM segment and the N-terminus of the cytoplasmic domain is essential for the sensing and signal transduction mechanisms. Together with other structural and functional works, the emerging picture suggests that diverse HKs possess distinct sensing and transduction mechanisms but share as rather general features (i) a symmetric phosphatase state and an asymmetric kinase state and (ii) similar functional outputs on the conserved DHp and ABD domains, achieved through different mechanisms that depend on the nature of the initial signal. We here advance (iii) an important role for TM prolines in transducing the initial signals to the cytoplasmic coiled coils, based on simulations of DesK's TM helices and our previous work on a related HK, PhoQ. Lastly, evidence for DesK, PhoQ, BvgS, and DctB HKs shows that (iv) overall catalytic output is tuned by a delicate balance between hydration potentials, coiled coil stability, and exposure of hydrophobic surface patches at their cytoplasmic coiled coils and at the N-terminal and C-terminal sides of their TM helices. This balance is so delicate that small perturbations, either physiological signals or induced by mutations, lead to large remodeling of the underlying conformational landscape achieving clear-cut changes in catalytic output, mirroring the required response speed of these systems for proper biological function.

Development of Logistics for Building Radiation Storm Shelters and Their Operational Evaluation

NASA Technical Reports Server (NTRS)

Cerro, Jeffrey A.

2015-01-01

Over the past three years NASA has been studying the operational effectiveness and astronaut protection efficacy of numerous radiation protection shelters for use in space exploration activities outside of earth's magnetosphere. The work presented was part of NASA's Advanced Exploration Systems (AES) RadWorks Storm Shelter project. This paper is a summary of the concept development activities of this third year. Fabricated items were integrated into mock up deep space habitat vehicle sections for operational evaluations. Two full scale human-in-loop simulations were designed, fabricated, and implemented through an Institutional Review Board approved solicited participant assessment process. Fabricated items are described, along with usage scenarios of two protection approaches. Existing ISS type logistics along with proposed variations of those logistics were used. Preliminary Discrete Event Simulation (DES) work is noted to be useful in quantifying and documenting operational performance measures for the two primary shelter methods, including some characterization of radiation dose accumulation over a mission timeline. The project also performed correlation analyses between effective radiation dose and the Risk of Exposure Induced Death (REID) to show that concept level work may be able to include such a performance metric in early stages of mission scenario habitat design trade space investigation.

Long-term cost-effectiveness of initiating treatment for painful diabetic neuropathy with pregabalin, duloxetine, gabapentin, or desipramine.

PubMed

Bellows, Brandon K; Nelson, Richard E; Oderda, Gary M; LaFleur, Joanne

2016-01-01

Painful diabetic neuropathy (PDN) affects nearly half of patients with diabetes. The objective of this study was to compare the cost-effectiveness of starting patients with PDN on pregabalin (PRE), duloxetine (DUL), gabapentin (GABA), or desipramine (DES) over a 10-year time horizon from the perspective of third-party payers in the United States. A Markov model was used to compare the costs (2013 $US) and effectiveness (quality-adjusted life-years [QALYs]) of first-line PDN treatments in 10,000 patients using microsimulation. Costs and QALYs were discounted at 3% annually. Probabilities and utilities were derived from the published literature. Costs were average wholesale price for drugs and national estimates for office visits and hospitalizations. One-way and probabilistic (PSA) sensitivity analyses were used to examine parameter uncertainty. Starting with PRE was dominated by DUL as DUL cost less and was more effective. Starting with GABA was extendedly dominated by a combination of DES and DUL. DES and DUL cost $23,468 and $25,979, while yielding 3.05 and 3.16 QALYs, respectively. The incremental cost-effectiveness ratio for DUL compared with DES was $22,867/QALY gained. One-way sensitivity analysis showed that the model was most sensitive to the adherence threshold and utility for mild pain. PSA showed that, at a willingness-to-pay (WTP) of $50,000/QALY, DUL was the most cost-effective option in 56.3% of the simulations, DES in 29.2%, GABA in 14.4%, and PRE in 0.1%. Starting with DUL is the most cost-effective option for PDN when WTP is greater than $22,867/QALY. Decision makers may consider starting with DUL for PDN patients.

Redshift distributions of galaxies in the Dark Energy Survey Science Verification shear catalogue and implications for weak lensing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bonnett, C.; Troxel, M. A.; Hartley, W.

We present photometric redshift estimates for galaxies used in the weak lensing analysis of the Dark Energy Survey Science Verification (DES SV) data. Four model- or machine learning-based photometric redshift methods { annz2, bpz calibrated against BCC-U fig simulations, skynet, and tpz { are analysed. For training, calibration, and testing of these methods, we also construct a catalogue of spectroscopically confirmed galaxies matched against DES SV data. The performance of the methods is evalu-ated against the matched spectroscopic catalogue, focusing on metrics relevant for weak lensing analyses, with additional validation against COSMOS photo-zs. From the galaxies in the DES SVmore » shear catalogue, which have mean redshift 0.72 ±0.01 over the range 0:3 < z < 1:3, we construct three tomographic bins with means of z = {0.45; 0.67,1.00g}. These bins each have systematic uncertainties δ z ≲ 0.05 in the mean of the fiducial skynet photo-z n(z). We propagate the errors in the redshift distributions through to their impact on cosmological parameters estimated with cosmic shear, and find that they cause shifts in the value of σ 8 of approx. 3%. This shift is within the one sigma statistical errors on σ8 for the DES SV shear catalog. We also found that further study of the potential impact of systematic differences on the critical surface density, Σ crit, contained levels of bias safely less than the statistical power of DES SV data. We recommend a final Gaussian prior for the photo-z bias in the mean of n(z) of width 0:05 for each of the three tomographic bins, and show that this is a sufficient bias model for the corresponding cosmology analysis.« less

A detached eddy simulation model for the study of lateral separation zones along a large canyon-bound river

USGS Publications Warehouse

Alvarez, Laura V.; Schmeeckle, Mark W.; Grams, Paul E.

2017-01-01

Lateral flow separation occurs in rivers where banks exhibit strong curvature. In canyon-boundrivers, lateral recirculation zones are the principal storage of fine-sediment deposits. A parallelized,three-dimensional, turbulence-resolving model was developed to study the flow structures along lateralseparation zones located in two pools along the Colorado River in Marble Canyon. The model employs thedetached eddy simulation (DES) technique, which resolves turbulence structures larger than the grid spacingin the interior of the flow. The DES-3D model is validated using Acoustic Doppler Current Profiler flowmeasurements taken during the 2008 controlled flood release from Glen Canyon Dam. A point-to-pointvalidation using a number of skill metrics, often employed in hydrological research, is proposed here forfluvial modeling. The validation results show predictive capabilities of the DES model. The model reproducesthe pattern and magnitude of the velocity in the lateral recirculation zone, including the size and position ofthe primary and secondary eddy cells, and return current. The lateral recirculation zone is open, havingcontinuous import of fluid upstream of the point of reattachment and export by the recirculation returncurrent downstream of the point of separation. Differences in magnitude and direction of near-bed andnear-surface velocity vectors are found, resulting in an inward vertical spiral. Interaction between therecirculation return current and the main flow is dynamic, with large temporal changes in flow direction andmagnitude. Turbulence structures with a predominately vertical axis of vorticity are observed in the shearlayer becoming three-dimensional without preferred orientation downstream.

A detached eddy simulation model for the study of lateral separation zones along a large canyon-bound river

NASA Astrophysics Data System (ADS)

Alvarez, Laura V.; Schmeeckle, Mark W.; Grams, Paul E.

2017-01-01

Lateral flow separation occurs in rivers where banks exhibit strong curvature. In canyon-bound rivers, lateral recirculation zones are the principal storage of fine-sediment deposits. A parallelized, three-dimensional, turbulence-resolving model was developed to study the flow structures along lateral separation zones located in two pools along the Colorado River in Marble Canyon. The model employs the detached eddy simulation (DES) technique, which resolves turbulence structures larger than the grid spacing in the interior of the flow. The DES-3D model is validated using Acoustic Doppler Current Profiler flow measurements taken during the 2008 controlled flood release from Glen Canyon Dam. A point-to-point validation using a number of skill metrics, often employed in hydrological research, is proposed here for fluvial modeling. The validation results show predictive capabilities of the DES model. The model reproduces the pattern and magnitude of the velocity in the lateral recirculation zone, including the size and position of the primary and secondary eddy cells, and return current. The lateral recirculation zone is open, having continuous import of fluid upstream of the point of reattachment and export by the recirculation return current downstream of the point of separation. Differences in magnitude and direction of near-bed and near-surface velocity vectors are found, resulting in an inward vertical spiral. Interaction between the recirculation return current and the main flow is dynamic, with large temporal changes in flow direction and magnitude. Turbulence structures with a predominately vertical axis of vorticity are observed in the shear layer becoming three-dimensional without preferred orientation downstream.

Fast Plasma Instrument for MMS: Data Compression Simulation Results

NASA Astrophysics Data System (ADS)

Barrie, A.; Adrian, M. L.; Yeh, P.; Winkert, G.; Lobell, J.; Vinas, A. F.; Simpson, D. G.

2009-12-01

Magnetospheric Multiscale (MMS) mission will study small-scale reconnection structures and their rapid motions from closely spaced platforms using instruments capable of high angular, energy, and time resolution measurements. To meet these requirements, the Fast Plasma Instrument (FPI) consists of eight (8) identical half top-hat electron sensors and eight (8) identical ion sensors and an Instrument Data Processing Unit (IDPU). The sensors (electron or ion) are grouped into pairs whose 6° x 180° fields-of-view (FOV) are set 90° apart. Each sensor is equipped with electrostatic aperture steering to allow the sensor to scan a 45° x 180° fan about the its nominal viewing (0° deflection) direction. Each pair of sensors, known as the Dual Electron Spectrometer (DES) and the Dual Ion Spectrometer (DIS), occupies a quadrant on the MMS spacecraft and the combination of the eight electron/ion sensors, employing aperture steering, image the full-sky every 30-ms (electrons) and 150-ms (ions), respectively. To probe the diffusion regions of reconnection, the highest temporal/spatial resolution mode of FPI results in the DES complement of a given spacecraft generating 6.5-Mb s-1 of electron data while the DIS generates 1.1-Mb s-1 of ion data yielding an FPI total data rate of 6.6-Mb s-1. The FPI electron/ion data is collected by the IDPU then transmitted to the Central Data Instrument Processor (CIDP) on the spacecraft for science interest ranking. Only data sequences that contain the greatest amount of temporal/spatial structure will be intelligently down-linked by the spacecraft. Currently, the FPI data rate allocation to the CIDP is 1.5-Mb s-1. Consequently, the FPI-IDPU must employ data/image compression to meet this CIDP telemetry allocation. Here, we present updated simulations of the CCSDS 122.0-B-1 algorithm-based compression of the FPI-DES electron data as well as the FPI-DIS ion data. Compression analysis is based upon a seed of re-processed Cluster/PEACE electron measurements and Cluster/CIS ion measurements. Topics to be discussed include: (i) Review of compression algorithm; (ii) Data quality; (iii) Data formatting/organization; (iv) Compression optimization; (v) Investigation of pseudo-log precompression; and (vi) Analysis of compression effectiveness for burst mode as well as fast survey mode data packets for both electron and ion data We conclude with a presentation of the current base-lined FPI data compression approach.

An Applied-Scientific Approach to Field Assessments - Try It Out - A Field Guide for Practitioners (Une approche scientifique des evaluations de terrain - Essayer le - Un guide de terrain a destination des praticiens)

DTIC Science & Technology

2017-12-01

settings – be it field trials, field experiments, tests or evaluations . This guide is based on experience of the the NATO STO Task Group (HFM-211...practice by the Task Group. Feedback from defence colleges and Training and Evaluation staffs is highly welcomed. ES - 2 STO-TR-HFM-211 Une... evaluation programs have been setup to analyse and demonstrate the added value and effectiveness of new developments such as new operational concepts, new

Approche du Processus d'Auto-Formation Inspiree de la Methode des "Histoires de vie" dans le cadre de la Formation continuee des institutrices maternelles en Communaute francaise de Belgique (Approach to the Process of Self-Instruction Inspired by the "Life History" Method in the Framework of the Continuing Education of Preschool Teachers in the French-Speaking Community in Belgium).

ERIC Educational Resources Information Center

Brandt, Madeleine

1994-01-01

Describes a study of the use of a critical events questionnaire and "educational biography" as means of training preschool teachers to question their role as teachers; to question their relationship with children; and to liberate their consciousness. Discusses the quantitative and qualitative results of the self-evaluation processes. (AC)

Automated Software Generation Approaches for the Design and Development of Guidance and Control Systems Software (Les Differentes Approches Generation pour la Conception et le Developpement de Logiciels de Guidage et de Pilotage)

DTIC Science & Technology

1992-03-01

de Logiciels") etaient en cours de developpement pour resoudre des problimes similaires dans le monde de la gestion . le Panel... gestion des sp cifications, d’algorithmes et de reprtsentations. Techniques et Sciences Informatiques, 4(3), 1985. 4-21 R. Jacquart, M. Lemoine, and G...Guidance and Control Systems Software (Les Diff~rentes Approches "G6neration" pour la Conception et le D~veloppement de Logiciels de Guidage et de

Mesoscopic Field-Effect-Induced Devices in Depleted Two-Dimensional Electron Systems

NASA Astrophysics Data System (ADS)

Bachsoliani, N.; Platonov, S.; Wieck, A. D.; Ludwig, S.

2017-12-01

Nanoelectronic devices embedded in the two-dimensional electron system (2DES) of a GaAs /(Al ,Ga )As heterostructure enable a large variety of applications ranging from fundamental research to high-speed transistors. Electrical circuits are thereby commonly defined by creating barriers for carriers by the selective depletion of a preexisting 2DES. We explore an alternative approach: we deplete the 2DES globally by applying a negative voltage to a global top gate and screen the electric field of the top gate only locally using nanoscale gates placed on the wafer surface between the plane of the 2DES and the top gate. Free carriers are located beneath the screen gates, and their properties can be controlled by means of geometry and applied voltages. This method promises considerable advantages for the definition of complex circuits by the electric-field effect, as it allows us to reduce the number of gates and simplify gate geometries. Examples are carrier systems with ring topology or large arrays of quantum dots. We present a first exploration of this method pursuing field effect, Hall effect, and Aharonov-Bohm measurements to study electrostatic, dynamic, and coherent properties.

Securing Sensitive Flight and Engine Simulation Data Using Smart Card Technology

NASA Technical Reports Server (NTRS)

Blaser, Tammy M.

2003-01-01

NASA Glenn Research Center has developed a smart card prototype capable of encrypting and decrypting disk files required to run a distributed aerospace propulsion simulation. Triple Data Encryption Standard (3DES) encryption is used to secure the sensitive intellectual property on disk pre, during, and post simulation execution. The prototype operates as a secure system and maintains its authorized state by safely storing and permanently retaining the encryption keys only on the smart card. The prototype is capable of authenticating a single smart card user and includes pre simulation and post simulation tools for analysis and training purposes. The prototype's design is highly generic and can be used to protect any sensitive disk files with growth capability to urn multiple simulations. The NASA computer engineer developed the prototype on an interoperable programming environment to enable porting to other Numerical Propulsion System Simulation (NPSS) capable operating system environments.

Geomorphic aspects of groundwater flow

NASA Astrophysics Data System (ADS)

LaFleur, Robert G.

The many roles that groundwater plays in landscape evolution are becoming more widely appreciated. In this overview, three major categories of groundwater processes and resulting landforms are considered: (1) Dissolution creates various karst geometries, mainly in carbonate rocks, in response to conditions of recharge, geologic setting, lithology, and groundwater circulation. Denudation and cave formation rates can be estimated from kinetic and hydraulic parameters. (2) Groundwater weathering generates regoliths of residual alteration products at weathering fronts, and subsequent exhumation exposes corestones, flared slopes, balanced rocks, domed inselbergs, and etchplains of regional importance. Groundwater relocation of dissolved salts creates duricrusts of various compositions, which become landforms. (3) Soil and rock erosion by groundwater processes include piping, seepage erosion, and sapping, important agents in slope retreat and headward gully migration. Thresholds and limits are important in many chemical and mechanical groundwater actions. A quantitative, morphometric approach to groundwater landforms and processes is exemplified by selected studies in carbonate and clastic terrains of ancient and recent origins. Résumé Les rôles variés joués par les eaux souterraines dans l'évolution des paysages deviennent nettement mieux connus. La revue faite ici prend en considération trois grandes catégories de processus liés aux eaux souterraines et les formes associées: (1) La dissolution crée des formes karstiques variées, surtout dans les roches carbonatées, en fonction des conditions d'alimentation, du cadre géologique, de la lithologie et de la circulation des eaux souterraines. Les taux d'érosion et de formation des grottes peuvent être estimés à partir de paramètres cinétiques et hydrauliques. (2) L'érosion par les eaux souterraines donne naissance à des régolites, résidus d'altération sur des fronts d'altération, et l'exhumation résultante fait apparaître des rognons, des pentes qui s'évasent, des roches en équilibre, des inselbergs et des plaines de corrosion d'extension régionale. La migration des sels dissous des eaux souterraines crée des croûtes de compositions variées, qui constituent des paysages particuliers. (3) Les processus d'érosion des sols et des roches par les eaux souterraines comprennent les phénomènes suivants: la chenalisation, l'érosion par suintement, le sapement, qui tous sont des agents notables du recul des versants et d'érosion régressive vers l'amont. Les seuils et les limites sont importants dans de nombreuses actions chimiques et mécaniques des eaux souterraines. Une approche morphométrique quantitative des formes et des processus liés aux eaux souterraines est donnée en exemple à partir d'études choisies dans les terrains carbonatés et détritiques d'origine aussi bien ancienne que récente. Resumen Las aguas subterráneas tienen una importancia fundamental en la evolución de los paisajes geomorfológicos. En este artículo se consideran tres grandes categorías de procesos ligados al agua subterránea y sus correspondientes paisajes resultantes: (1) La disolución crea distintas geometrías kársticas, fundamentalmente en rocas carbonatadas, como respuesta a las condiciones de recarga, condicionantes geológicos, litologías y al propio flujo de agua subterránea. La velocidad de denudación y formación de cavernas se puede estimar a partir de los parámetros cinéticos e hidráulicos. (2) La erosión producida por las aguas subterráneas genera regolitas de alteración residual en los frentes de erosión, con los subsiguientes afloramientos de rocas inalteradas, inselbergs, rocas oscilantes o llanuras de corrosión de carácter regional. La recolocación de las sales disueltas crea costras superficiales de diferente composición. (3) La erosión de rocas y suelos por procesos ligados al agua subterránea, como filtración y arrastre de finos da lugar a un movimiento de retroceso de taludes y barrancos. La existencia de umbrales y límites de actuación es muy importante en muchas acciones químicas y mecánicas. Una metodología para el estudio de relieves y procesos, basada en aspectos cuantitativos y morfométricos se ejemplifica mediante estudios realizados en rocas carbonatadas y en terrenos clásticos de diferentes edades.

Significantly lower incidence of early definite stent thrombosis of drug-eluting stents after unrestricted use in Japan using ticlopidine compared to western countries using clopidogrel: a retrospective comparison with western mega-studies.

PubMed

Ishikawa, Tetsuya; Nakano, Yosuke; Endoh, Akira; Kubota, Takeyuki; Suzuki, Teruhiko; Nakata, Koutarou; Miyamoto, Takashi; Murakami, Michiaki; Sakamoto, Hiroshi; Imai, Kamon; Mochizuki, Seibu; Yoshimura, Michihiro; Mutoh, Makoto

2009-10-01

The incidence of definite stent thrombosis (ST) after use of drug-eluting stents (DES), as defined by the Academic Research Consortium, is known to be lower in Japan than in western countries. However, a statistical difference in the incidence of early definite ST (EDST) associated with the unrestricted use of DES has not yet been documented. Therefore, the incidence of EDST in our Japanese institute after unrestricted use of DES was retrospectively compared with those reported in western mega-studies. During the 40 months from August 2004 to November 2007 (before approval of clopidogrel in Japan), DES were implanted in 3605 lesions in 1885 patients in our institute; lesion- and patient-associated percentages of DES use were 95.2% and 94.7%, respectively. Mean stent length per lesion was 33.2 mm, emergent procedures and ST-elevation myocardial infarctions made up 33.7% and 16.4% of the procedures, respectively, intravascular ultrasonography was used 96.0% of the time, a distal protection device for acute coronary syndrome was used 68.7% of the time, and the mean maximum inflation pressure was 19.5 atm. EDST was observed in five lesions (0.139%) in four patients (0.212%). The incidence of patient-associated EDST at our center was significantly lower than in four western mega-studies (0.736%, 66 of 8970 patients; 0.634%, 149 of 23,500; 0.595%, 52 of 8402; 0.997%, 20 of 2006) (p<0.05, <0.01, <0.05, <0.01, respectively, using a chi(2)-test). Due to differences in procedural approaches in Japan, the incidence of EDST after unrestricted use of DES was significantly lower than in western countries.

A Qualitative Case Study Approach To Examine Information Resources Management. (Utilisation d'une Approche Qualitative par Methode de cas pour Etudier la Gestion des Ressources D'information).

ERIC Educational Resources Information Center

Bergeron, Pierrette

1997-01-01

Illustrates how a qualitative approach was used to study the complex and poorly defined concept of information resources management. Explains the general approach to data collection, its advantages and limitations, and the process used to analyze the data. Presents results, along with lessons learned through using method. (Author/AEF)

Embrace the Dark Side: Advancing the Dark Energy Survey

NASA Astrophysics Data System (ADS)

Suchyta, Eric

The Dark Energy Survey (DES) is an ongoing cosmological survey intended to study the properties of the accelerated expansion of the Universe. In this dissertation, I present work of mine that has advanced the progress of DES. First is an introduction, which explores the physics of the cosmos, as well as how DES intends to probe it. Attention is given to developing the theoretical framework cosmologists use to describe the Universe, and to explaining observational evidence which has furnished our current conception of the cosmos. Emphasis is placed on the dark sector - dark matter and dark energy - the content of the Universe not explained by the Standard Model of particle physics. As its name suggests, the Dark Energy Survey has been specially designed to measure the properties of dark energy. DES will use a combination of galaxy cluster, weak gravitational lensing, angular clustering, and supernovae measurements to derive its state of the art constraints, each of which is discussed in the text. The work described in this dissertation includes science measurements directly related to the first three of these probes. The dissertation presents my contributions to the readout and control system of the Dark Energy Camera (DECam); the name of this software is SISPI. SISPI uses client-server and publish-subscribe communication patterns to coordinate and command actions among the many hardware components of DECam - the survey instrument for DES, a 570 megapixel CCD camera, mounted at prime focus of the Blanco 4-m Telescope. The SISPI work I discuss includes coding applications for DECam's filter changer mechanism and hexapod, as well as developing the Scripts Editor, a GUI application for DECam users to edit and export observing sequence SISPI can load and execute. Next, the dissertation describes the processing of early DES data, which I contributed. This furnished the data products used in the first-completed DES science analysis, and contributed to improving the collaboration-wide treatment of the data. The science measurements themselves are also detailed. We verified DES's capabilities for performing weak lensing analyses by measuring the masses of four galaxy clusters, finding consistency with previous measurements, and utilized DECam's wide field-of-view for a photometric study of filament-like structures in the fields. Finally, my recent work with Balrog is presented. Balrog is a simulation toolkit for embedding fake objects into real survey images in order to correct for systematic biases. We have used Balrog to extend DES galaxy clustering measurements down to fainter limits than previously possible, finding results consistent with higher-resolution space-based data. The methodology used in this analysis generalizes beyond galaxy clustering alone, and promises to be useful in future imaging survey measurements.

Reducing postponements of elective pediatric cardiac procedures: analysis and implementation of a discrete event simulation model.

PubMed

Day, Theodore Eugene; Sarawgi, Sandeep; Perri, Alexis; Nicolson, Susan C

2015-04-01

This study describes the use of discrete event simulation (DES) to model and analyze a large academic pediatric and test cardiac center. The objective was to identify a strategy, and to predict and test the effectiveness of that strategy, to minimize the number of elective cardiac procedures that are postponed because of a lack of available cardiac intensive care unit (CICU) capacity. A DES of the cardiac center at The Children's Hospital of Philadelphia was developed and was validated by use of 1 year of deidentified administrative patient data. The model was then used to analyze strategies for reducing postponements of cases requiring CICU care through improved scheduling of multipurpose space. Each of five alternative scenarios was simulated for ten independent 1-year runs. Reductions in simulated elective procedure postponements were found when a multipurpose procedure room (the hybrid room) was used for operations on Wednesday and Thursday, compared with Friday (as was the real-world use). The reduction Wednesday was statistically significant, with postponements dropping from 27.8 to 23.3 annually (95% confidence interval 18.8-27.8). Thus, we anticipate a relative reduction in postponements of 16.2%. Since the implementation, there have been two postponements from July 1 to November 21, 2014, compared with ten for the same time period in 2013. Simulation allows us to test planned changes in complex environments, including pediatric cardiac care. Reduction in postponements of cardiac procedures requiring CICU care is predicted through reshuffling schedules of existing multipurpose capacity, and these reductions appear to be achievable in the real world after implementation. Copyright © 2015 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Computational Evaluation of Mixtures of Hydrofluorocarbons and Deep Eutectic Solvents for Absorption Refrigeration Systems.

PubMed

Abedin, Rubaiyet; Heidarian, Sharareh; Flake, John C; Hung, Francisco R

2017-10-24

We used computational tools to evaluate three working fluid mixtures for single-effect absorption refrigeration systems, where the generator (desorber) is powered by waste or solar heat. The mixtures studied here resulted from combining a widely used hydrofluorocarbon (HFC) refrigerant, R134a, with three common deep eutectic solvents (DESs) formed by mixing choline chloride (hydrogen bond acceptor, HBA) with urea, glycerol, or ethylene glycol as the hydrogen bond donor (HBD) species. The COSMOtherm/TmoleX software package was used in combination with refrigerant data from NIST/REFPROP, to perform a thermodynamic evaluation of absorption refrigeration cycles using the proposed working fluid mixtures. Afterward, classical MD simulations of the three mixtures were performed to gain insight on these systems at the molecular level. Larger cycle efficiencies are obtained when R134a is combined with choline chloride and ethylene glycol, followed by the system where glycerol is the HBD, and finally that where the HBD is urea. MD simulations indicate that the local density profiles of all species exhibit very sharp variations in systems containing glycerol or urea; furthermore, the Henry's law constants of R134a in these two systems are larger than those observed for the HFC in choline chloride and ethylene glycol, indicating that R134a is more soluble in the latter DES. Interaction energies indicate that the R134a-R134a interactions are weaker in the system where ethylene glycol is the HBD, as compared to in the other DES. Radial distribution functions confirm that in all systems, the DES species do not form strong directional interactions (e.g., hydrogen bonds) with the R134a molecules. Relatively strong interactions are observed between the Cl anions and the hydrogen atoms in R134a; however, the atom-atom interactions between R134a and the cation and HBD species are weaker and do not play a significant role in the solvation of the refrigerant. In all systems, R134a has the largest diffusion coefficients, followed by the HBD, the anion and the cation; the diffusion coefficients are the largest in the systems containing ethylene glycol, followed by those having glycerol and urea. This work is our first step toward our long-term goal of designing and demonstrating optimal working fluid mixtures for use in absorption refrigeration systems. Our results suggest that COSMO-RS can be used to perform a rapid screening of a large number of working fluid mixtures, and select a few candidates for further exploration using molecular simulations and experiments. These latter approaches can be used to refine the accuracy of the COSMO-RS predictions, and to optimize the selection of optimal working fluid mixtures for demonstration in absorption refrigeration systems powered by solar or waste heat sources.

Fingerprinting Desmosine-Containing Elastin Peptides

NASA Astrophysics Data System (ADS)

Schräder, Christoph U.; Heinz, Andrea; Majovsky, Petra; Schmelzer, Christian E. H.

2015-05-01

Elastin is a vital protein of the extracellular matrix of jawed vertebrates and provides elasticity to numerous tissues. It is secreted in the form of its soluble precursor tropoelastin, which is subsequently cross-linked in the course of the elastic fiber assembly. The process involves the formation of the two tetrafunctional amino acids desmosine (DES) and isodesmosine (IDES), which are unique to elastin. The resulting high degree of cross-linking confers remarkable properties, including mechanical integrity, insolubility, and long-term stability to the protein. These characteristics hinder the structural elucidation of mature elastin. However, MS2 data of linear and cross-linked peptides released by proteolysis can provide indirect insights into the structure of elastin. In this study, we performed energy-resolved collision-induced dissociation experiments of DES, IDES, their derivatives, and DES-/IDES-containing peptides to determine characteristic product ions. It was found that all investigated compounds yielded the same product ion clusters at elevated collision energies. Elemental composition determination using the exact masses of these ions revealed molecular formulas of the type CxHyN, suggesting that the pyridinium core of DES/IDES remains intact even at relatively high collision energies. The finding of these specific product ions enabled the development of a similarity-based scoring algorithm that was successfully applied on LC-MS/MS data of bovine elastin digests for the identification of DES-/IDES-cross-linked peptides. This approach facilitates the straightforward investigation of native cross-links in elastin.

Fingerprinting desmosine-containing elastin peptides.

PubMed

Schräder, Christoph U; Heinz, Andrea; Majovsky, Petra; Schmelzer, Christian E H

2015-05-01

Elastin is a vital protein of the extracellular matrix of jawed vertebrates and provides elasticity to numerous tissues. It is secreted in the form of its soluble precursor tropoelastin, which is subsequently cross-linked in the course of the elastic fiber assembly. The process involves the formation of the two tetrafunctional amino acids desmosine (DES) and isodesmosine (IDES), which are unique to elastin. The resulting high degree of cross-linking confers remarkable properties, including mechanical integrity, insolubility, and long-term stability to the protein. These characteristics hinder the structural elucidation of mature elastin. However, MS(2) data of linear and cross-linked peptides released by proteolysis can provide indirect insights into the structure of elastin. In this study, we performed energy-resolved collision-induced dissociation experiments of DES, IDES, their derivatives, and DES-/IDES-containing peptides to determine characteristic product ions. It was found that all investigated compounds yielded the same product ion clusters at elevated collision energies. Elemental composition determination using the exact masses of these ions revealed molecular formulas of the type CxHyN, suggesting that the pyridinium core of DES/IDES remains intact even at relatively high collision energies. The finding of these specific product ions enabled the development of a similarity-based scoring algorithm that was successfully applied on LC-MS/MS data of bovine elastin digests for the identification of DES-/IDES-cross-linked peptides. This approach facilitates the straightforward investigation of native cross-links in elastin.

The future of stochastic and upscaling methods in hydrogeology

NASA Astrophysics Data System (ADS)

Nœtinger, Benoît; Artus, Vincent; Zargar, Ghassem

2005-03-01

Geological formations are complex features resulting from geological, mechanical, and physico-chemical processes occurring over a very wide range of length scales and time scales. Transport phenomena ranging from the molecular scale to several hundreds of kilometers may influence the overall behavior of fluid flow in these formations. Heterogeneities that cover a large range of spatial scales play an essential role to channel fluid-flows, especially when they are coupled with non-linearities inherent to transport processes in porous media. These issues have considerable practical importance in groundwater management, and in the oil industry, particularly in solving new problems posed by projects concerned with the trapping of CO2 in the subsurface. In order to manage this complexity, one must be able to prioritize the respective influences of various relevant geological and physico-chemical phenomena occurring at several ranges of length and time scales as well as understand and use the increasingly rich and complex geostatistical models to provide realistic simulations of subsurface conditions. Multiscale simulation of fluid transport in these formations should help engineers to focus on the crucial phenomena that control the flow. This provides a natural framework to integrate data, to solve inverse problems involving large amounts of data, resulting in a reduction of the uncertainties of the subsurface description that must be evaluated. This allows in turn the making of more relevant practical decisions. In this paper, some perspectives on the development of upscaling approaches are presented, highlighting some recent multiscale concepts, discarding the fractured media case. Upscaling can be used as a useful framework to simultaneously manage scale-dependant problems, stochastic approaches and inverse problems. Actual and potential applications of upscaling to the elaboration of subsurface models constrained to observed data, and the management of uncertainties and sensitivity studies in a global multiscale framework is emphasized. In particular, upscaling can help in finding the parameters that control the overall behavior of the flow. Finally, upscaling approaches of non-linear transport equations appear as a new frontier in this area of research. Les formations géologiques sont des entités complexes résultant de processus géologiques, mécaniques et physico-chimiques, à de larges palettes d'échelles de temps et d'espace. Les phénomènes de transport, qui sont définis de l'échelle moléculaire à l'échelle pluri-kilométrique, peut influencer le comportement global des écoulements dans les formations. Les hétérogénéités qui recouvrent plusieurs échelles spatiales jouent un rôle essentiel pour les écoulements canaliser, et plus spécialement lorsque les écoulements sont couplés avec des non-linéarités inhérentes aux processus de transport dans les milieux poreux. Les problémes ont une importance pratique considérable sur la gestion de l'eau souterraine, et dans l'industrie du pétrole, et plus particulièrement pour la résolution de nouveaux problèmes po sés par les projets concernés par le piégeage du CO2 en subsurface. De manière à gérer cette complexité, il faut être capable de donner la priorité aux influences respectives des phénomènes géologiques et physico-chimiques utiles, intervenant à différentes échelles de temps et d'espace, et comprendre et utiliser les modèles géostatistiques, riches et complexes, permettant de se munir de simulations réalistes des conditions de sub-surface. Les simulations de l'écoulement à plusieurs échelles, dans ces formations, peuvent aider les ingénieurs à se focaliser sur les phénomènes cruciaux qui contrôlent l'écoulement. Ceci apporte un cadre de travail pour intégrer les données, résoudre les problèmes inverses impliquant une grande quantité de données, résultant en une réduction de l'incertitude de la description de la subsurface devant être évaluée. Ceci permet de prendre des décisions plus pertinentes et pratiques. Dans cet article, certaines perspectives sur le développement d'approches «upscaling» (changement d' échelle) sont présentées, mettant en lumière des concepts mutli-échelles récents, en mettant de côté le problème du milieu fracturé. L'upscalling peut être utilisé comme un cadre utile pour gérer simultanément les problèmes d'échelle de travail, les approches stochastiques et les problèmes inverses. Les applications effectives et potentielles de l'upscalling sont mis en lumière, dans l'élaboration de modèles de subsurface contraints aux données observées, et la gestion des incertitudes et des études de sensibilité dans un cadre multi-échelle global. L'upscaling peut, en particulier, aider à trouver les paramètres qui contrôlent le comportement global de l'écoulement. Finalement, les approches par upscaling des équations non-linéaires de transport apparaissent comme une nouvelle frontière dans cette aire de recherche. Las formaciones geológicas son entidades complejas que resultan de procesos geológicos, mecánicos, y físico-químicos que ocurren en un rango muy amplio de escalas espaciales y escalas temporales. Los procesos de transporte que varían de la escala molecular a varios cientos de kilómetros pueden influenciar el comportamiento global del flujo de fluido en estas formaciones. Las heterogeneidades que cubren un rango amplio de escalas espaciales juegan un papel esencial para canalizar flujos de fluidos, especialmente cuando están acoplados con no linealidades inherentes a procesos de transporte en medios porosos. Estos asuntos tienen importancia práctica considerable en la gestión de aguas subterráneas, y en la industria petrolera, particularmente en la solución de problemas nuevos ocasionados por proyectos relacionados con el entrampamiento de CO2 en el subsuelo. Para gestionar esta complejidad uno tiene que priorizar las influencias respectivas de varios fenómenos relevantes geológicos y físico-químicos que ocurren en varios rangos de escalas espaciales y escalas temporales así como entender y utilizar modelos geoestadísticos complejos y cada vez más acaudalados para aportar simulaciones realisticas de los condiciones del subsuelo. La simulación en escalas múltiples del transporte de fluidos en estas formaciones debería de ayudar a los ingenieros a enfocarse en fenómenos cruciales que controlan el flujo. Esto aporta un marco natural para integrar datos, resolver problemas inversos que involucran gran cantidad de datos, resultando en una reducción de las incertidumbres de la descripción del subsuelo que tiene que evaluarse. Esto permite a la vez tomar más decisiones practicas relevantes. En este artículo se presentan algunas perspectivas sobre el desarrollo de los enfoques de escala alta, resaltando algunos conceptos de escalas múltiples recientes, descartando el caso de medio fracturado. La escala alta puede utilizarse como un marco útil para manejar simultáneamente problemas dependientes de escala, enfoques estocásticos y problemas inversos. Se enfatiza las aplicaciones reales y potenciales de escala alta para la elaboración de modelos subsuperficiales confrontados con datos observados, y el manejo de incertidumbres y estudios de sensitividad en un marco global de escalas múltiples. En particular, la escala a lta puede ayudar a encontrar los parámetros que controlan el comportamiento global del flujo. Finalmente, los enfoques de escala alta de ecuaciones de transporte no lineal aparecen como una nueva frontera en esta área de la investigación.

CFD simulation of an unbaffled stirred tank reactor driven by a magnetic rod: assessment of turbulence models.

PubMed

Li, Jiajia; Deng, Baoqing; Zhang, Bing; Shen, Xiuzhong; Kim, Chang Nyung

2015-01-01

A simulation of an unbaffled stirred tank reactor driven by a magnetic stirring rod was carried out in a moving reference frame. The free surface of unbaffled stirred tank was captured by Euler-Euler model coupled with the volume of fluid (VOF) method. The re-normalization group (RNG) k-ɛ model, large eddy simulation (LES) model and detached eddy simulation (DES) model were evaluated for simulating the flow field in the stirred tank. All turbulence models can reproduce the tangential velocity in an unbaffled stirred tank with a rotational speed of 150 rpm, 250 rpm and 400 rpm, respectively. Radial velocity is underpredicted by the three models. LES model and RNG k-ɛ model predict the better tangential velocity and axial velocity, respectively. RNG k-ɛ model is recommended for the simulation of the flow in an unbaffled stirred tank with magnetic rod due to its computational effort.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romanov, Gennady

Typically the RFQs are designed using the Parmteq, DesRFQ and other similar specialized codes, which produces the files containing the field and geometrical parameters for every cell. The beam dynamic simulations with these analytical fields a re, of course, ideal realizations of the designed RFQs. The new advanced computing capabilities made it possible to simulate beam and even dark current in the realistic 3D electromagnetic fields in the RFQs that may reflect cavity tuning, presence of tune rs and couplers, RFQ segmentation etc. The paper describes the utilization of full 3D field distribution obtained with CST Studio Suite for beammore » dynamic simulations using both PIC solver of CST Particle Studio and the beam dynamic code TRACK.« less

Présentation générale

NASA Astrophysics Data System (ADS)

Volino, F.

Le travail faisant l'objet de cette série d'articles de titre général "Théorie visco-élastique non-extensive", numérotée de (I) à (VI), a été initialement motivé par l'analyse de mesures de Résonance Magnétique Nucléaire (RMN) sur des polymères nématogènes dans les phases nématique et isotrope [1,2,3,4,5,6,7,8]. Sans entrer dans le détail de ces mesures, rappelons que les mouvements des molécules rétrécissent les raies RMN, mais que, avec des molécules aussi grosses que ces polymères, on est en dehors du régime de rétrécissement extrême, donc dans un régime ou la forme de raie dépend du détail des mouvements [9]. La théorie des modes élastiques des nématiques fournissait le cadre conceptuel naturel pour décrire de tels mouvements. L'application de cette théorie, qui, dans une version simplifiée, mais suffisante en pratique, ne fait intervenir que deux paramètres ajustables, le paramètre d'ordre nématique et une viscosité moyenne, a effectivement permis de reproduire dans le détail des formes de raie RMN de polymères en phase nématique, avec des valeurs des deux paramètres en accord avec celles qui avaient pu être estimées par des mesures directes. La théorie des modes élastiques était donc testée avec succès par l'analyse de formes de raies RMN. L'analyse en phase nématique apparaissait bien auto-cohérente [5]. Une incohérence logique est cependant apparue dans les études qui ont suivi. Les ajustements précédents avaient été faits pour des spectres obtenus au milieu de la phase nématique, ou l'ordre orientationnel est relativement élevé. Cependant, l'ordre diminue en chauffant, et on a trouvé qu'il est toujours possible de simuler les formes de raies avec le même modèle, en changeant les valeurs du paramètre d'ordre et de la viscosité. - la transition nématique-isotrope, l'expérience montre que l'allure générale des spectres RMN du polymère change peu, et le calcul montre qu'ils peuvent être simulés, de façon quasi-parfaite, par le même modèle, en supposant que l'échantillon soit "en poudre", et avec des valeurs très faibles du paramètre d'ordre. Une phase isotrope de polymère nématique étant un polymère normal, on a alors testé le modèle avec un polymère conventionnel, et de la même façon, de très bonnes simulations ont été obtenues. L'incohérence logique associée à ces résultats vient du fait que la théorie des modes élastiques ne devrait plus être applicable. En effet, le point de départ de cette théorie est une fonctionnelle énergie libre du nématique distordu par les fluctuations thermiques, qui ne contient que le terme quadratique en gradient d'orientation des molécules par rapport au directeur moyen. La limitation à ce premier terme signifie que la description ne devrait être valable que pour des gradients faibles, donc des paramètres d'ordre élevés. On aboutit donc au paradoxe suivant : la théorie des modes élastiques des nématiques permet de décrire d'autant mieux les spectres RMN de polymères, nématiques ou non, que le paramètre d'ordre est faible, c'est-à-dire qu'elle sort de son domaine d'applicabilité présumé. La façon la plus simple d'expliquer cette situation paradoxale est de dire que si la théorie des modes élastiques marche très bien en toutes circonstances, c'est parce qu'elle est beaucoup plus générale que ne l'ont (implicitement) imaginé leurs auteurs. Mais pour que tout redevienne cohérent, il fallait changer la signification d'au moins un concept de base de la théorie. Il a été décidé de modifier la signification des constantes élastiques et des viscosités, telles qu'elles apparaissent au niveau des équations fondamentales de la théorie standard. En pratique, la modification qui a été faite a été de supposer que ces quantités ne sont pas les quantités macroscopiques, mais des quantités non mesurables, associées aux modes élastiques, dépendant du vecteur d'onde et de la température, selon des formules simples, du type de celles obtenues par les méthodes du groupe de renormalisation, dans la théorie des changements de phase. Dans l'article (I) intitulé "Théorie simplifiée à modes rotationnels", des conséquences nécessaires de cette hypothèse, en phase nématique et isotrope, sont déduites, et un certain nombre de quantités mesurables sont calculées : élasticité, viscosité, effets de champ appliqués, chaleur spécifique... Le formalisme est unifié dans la mesure où les relations obtenues sont valables de part et d'autre de la transition. Le caractère le plus important de ces résultats est cependant le fait que toutes les quantités macroscopiques dépendent de façon non-triviale de la taille de l'échantillon, caractère que l'on a qualifié de "non-extensif". Dans l'article (II) intitulé "Premiers tests expérimentaux de la théorie simplifiée à modes rotationnels", l'ensemble des prédictions décrit dans l'article (I) est testé à l'aide de données de la littérature concernant trois nématiques typiques, pour lesquels la plupart des quantités ont été mesurées indépendamment par différents auteurs. Outre un accord quantitatif étonnant avec l'expérience, cette théorie permet aussi d'expliquer les écarts souvent obtenus par différents auteurs. Le modèle fonctionnant très bien pour décrire les propriétés rotationnelles des phases isotropes, il a été tentant de voir s'il pouvait aussi décrire les propriétés translationnelles. C'est ce qui fait l'objet de l'article (III) intitulé "Théorie simplifiée à modes translationnels". Moyennant une hypothèse concernant la forme mathématique de la contribution à la fonctionnelle énergie libre associée à l'existence de mouvements macroscopiques dans le fluide, couplant les gradients de vitesse aux fluctuations thermiques, on a pu obtenir des expressions, toujours non-extensives, d'un certain nombre de quantités mesurables, dont les coefficients de transport. Dans l'article (IV), intitulé "Premiers tests expérimentaux de la théorie simplifiée à modes translationnels", ces prédictions sont testées à l'aide de données de la littérature sur des liquides simples, dont l'eau. Le résultat est positivement troublant. Il rend compte en particulier des différences observées par des expérimentateurs indépendants mesurant la simple viscosité et surtout le coefficient de diffusion de l'eau pure. Ce liquide n'apparaît d'ailleurs pas comme un cas particulier. Il faut remarquer cependant que cet écart à l'extensivité, supposée depuis toujours dans tous les modèles, n'était pas prévisible a priori, mais que le modèle contient lui-même les conditions nécessaires à son applicabilité. Le fait que ces écarts à l'extensivité ne peuvent être observés que dans certaines conditions s'explique, et il n'y a aucune contradiction avec l'utilisation des modèles extensifs dans la technologie. Dans l'article (V) intitulé "Équations de diffusion, fonctions de distribution, viscosités et coefficients de diffusion, fonctions de corrélation", est abordée une extension de la théorie à la généralisation des équations de diffusion des théories standards. Avec ces équations généralisées apparaissent naturellement les notions de déplacement élastique, décrivant des mouvements aléatoires locaux de faible amplitude, et de déplacement visqueux, décrivant les mouvements aléatoires à grande distance. À chacun de ces deux types de mouvements est associé un temps caractéristique propre, et on montre que ces deux temps peuvent différer d'un grand nombre d'ordre de grandeurs à suffisamment basse température. Les fonctions de corrélations associées à différentes méthodes spectroscopiques sont calculées à l'aide de ces équations de diffusion. On trouve que ces fonctions ne sont pas des exponentielles, mais plutôt des "exponentielles étirées", la forme exponentielle pure n'étant qu'une approximation valide aux temps suffisamment courts, et aux temps suffisamment longs. Enfin, dans l'article (VI) intitulé "Application à un liquide formant une phase vitreuse, l'orthoterphényl (OTP)", la plupart des résultats théoriques obtenus dans les articles précédents est appliqué à la description d'un grand nombre de données expérimentales variées de la littérature, obtenues avec ce système exemplaire. On montre qu'il est ainsi possible de rationaliser l'ensemble de ces données. En particulier, la température de transition vitreuse apparaît comme la limite basse température d'une transition de phase très étalée depuis la température de fusion du cristal, analogue à la transition nématique-isotrope, mais de nature à la fois translationnelle et rotationnelle. Il faut admettre que les conséquences du modèle fabriqué à l'origine pour interpréter des expériences RMN, et surtout celles de son extension en dehors du domaine des seuls cristaux liquides a de quoi surprendre au premier abord. C'est seulement après une revue très complète d'un grand nombre de résultats expérimentaux, revue qui a pris beaucoup de temps et n'a jamais révélé de contradiction, qu'il a été décidé de soumettre ce modèle à l'attention de la communauté. Ce travail ne peut être considéré comme un aboutissement. Un certain nombre d'aspects n'ont pas été abordés. Par exemple, pour les substances nématogènes, le test de la description unifiée des résultats de diffusion de la lumière, qui a été la motivation historique du développement de la théorie standard des modes élastiques pour décrire ces résultats en phase nématique, n'a pas été traité. Autre exemple : pour les liquides usuels, on s'est limité à des situations loin du point critique, c'est-à-dire quand la présence de la phase gazeuse au-dessus du liquide peut être ignorée. Il convient donc de généraliser la théorie au problème des liquides peu denses, ainsi que d'explorer sa possible extension à la phase gazeuse et voir si on peut appliquer ce type de description au système liquide-gaz. Enfin, les aspects purement mécaniques n'ont pas été abordés. Puisque l'élasticité intervient de façon fondamentale dans la description, il faut reformuler la mécanique des fluides standard pour qu'apparaisse explicitement la notion d'élasticité dans les équations. C'est cette reformulation, dont on verra qu'elle permet de décrire de façon unifiée l'essentiel des comportements rhéologiques des fluides (passage continu entre les réponses élastique, visco-élastique, plastique et visqueuse, en fonction de la nature, la durée et l'intensité des sollicitations mécaniques, ainsi que de la température), qui sera l'objet du prochain article de cette série. Enfin, on peut se demander comment raccorder le formalisme hautement non-conventionnel de cette théorie, qui permet de calculer des quantités physiques mesurables, à celui de la théorie statistique standard, qui permet en principe de calculer les mêmes quantités. Ce problème reste pour l'instant ouvert, mais la piste à suivre pour le résoudre semble claire. Elle est probablement contenue dans la forme postulée dans (III) pour le couplage entre les mouvements aléatoires microscopiques, lesquels sont décrits de façon uniquement statistique (à l'aide d'équations de diffusion), et les mouvements macroscopiques qui sont décrits de façon mécaniste. En d'autres termes, on introduit un indéterminisme fondamental dans la description du mouvement des objets. Le raccord avec la théorie standard ne pourra donc se faire qu'au niveau de la statistique quantique, qui elle aussi contient dans son essence un indéterminisme du même type. Une comparaison détaillée ne sera possible que dans un stade ultérieur du développement de la présente théorie, quand tous les aspects mécaniques, dont certains ont été évoqués plus haut, auront été explorés. Il est espéré que ces informations préliminaires aideront le lecteur à la compréhension des articles (I) à (VI) proposés.

BENZO[A]PYRENE AND BENZO[C]PHENANTHRENE: THE EFFECT OF STRUCTURE ON THE BINDING OF WATER MOLECULES TO THE DIOL EPOXIDES

EPA Science Inventory

ABSTRACT
The interaction with water of the diol epoxides (DEs) of both a planar and a non-planar PAH have been examined using molecular dynamics. To determine probable water locations around the DE for later use in the study of DE protonation, molecular dynamics simulations u...

Design and simulation of nanoscale double-gate TFET/tunnel CNTFET

NASA Astrophysics Data System (ADS)

Bala, Shashi; Khosla, Mamta

2018-04-01

A double-gate tunnel field-effect transistor (DG tunnel FET) has been designed and investigated for various channel materials such as silicon (Si), gallium arsenide (GaAs), alminium gallium arsenide (Al x Ga1‑x As) and CNT using a nano ViDES Device and TCAD SILVACO ATLAS simulator. The proposed devices are compared on the basis of inverse subthreshold slope (SS), I ON/I OFF current ratio and leakage current. Using Si as the channel material limits the property to reduce leakage current with scaling of channel, whereas the Al x Ga1‑x As based DG tunnel FET provides a better I ON/I OFF current ratio (2.51 × 106) as compared to other devices keeping the leakage current within permissible limits. The performed silmulation of the CNT based channel in the double-gate tunnel field-effect transistor using the nano ViDES shows better performace for a sub-threshold slope of 29.4 mV/dec as the channel is scaled down. The proposed work shows the potential of the CNT channel based DG tunnel FET as a futuristic device for better switching and high retention time, which makes it suitable for memory based circuits.

Target Engageability Improvement Through Adaptive Data Fusion and Sensor Management: An Approach Based on the Fire Control Radar Search to Lock-On Time

DTIC Science & Technology

2008-05-01

ch based on the fire control radar search to l o ck - o n t i m e F. Rhéaume A. Benaskeur DRDC Valcartier Defence R& D Canada...recherche visant à développer et démontrer des concepts avancés de fusion de données adaptative et de gestion de res- sources. Les systèmes C2 navals...militaires sont en grande partie appuyés par des techno- logies de fusion de données et de gestion de ressources. Le C2 naval militaire doit

Molecular dynamics study of vacancy-like defects in a model glass : static behaviour

NASA Astrophysics Data System (ADS)

Delaye, J. M.; Limoge, Y.

1993-10-01

The possibility of defining vacancy-like defects in a Lennard-Jones glass is searched for in a systematic manner. Considering different relaxation levels of the same system, as well as different external pressures, we use a Molecular Dynamics simulation method, to study at constant volume or external pressure, the relaxation of a “piece” of glass, after the sudden removal of an atom. Three typical kinds of behaviour can be observed: the persistence of the empty volume left by the missing atom, its migration by clearly identifiable atomic jumps and the dissipation “on the spot”. A careful analysis of the probabilities of these three kinds of behaviour shows that a meaningful definition of vacancy-like defects can be given in a Lennard-Jones glass. Dans cet article, nous nous penchons de façon systématique sur la possibilité de définir des défauts de type lacunaire dans un verre de Lennard-Jones, à différents niveaux de relaxation et de pression, par une méthode de simulation numérique en dynamique moléculaire à volume ou à pression constants. Le défaut est créé en supprimant un atome et en suivant la réponse du système. Nous observons trois comportements typiques : la persistance sur place du “trou” laissé par l'atome supprimé, sa migration par des sauts atomiques clairement identifiés et enfin sa dissipation sur place. Une analyse détaillée de ces trois comportements montre qu'il est possible dans un verre de Lennard-Jones de définir des défauts de type lacunaire.

The Efficiency of Increasing the Capacity of Physiotherapy Screening Clinics or Traditional Medical Services to Address Unmet Demand in Orthopaedic Outpatients: A Practical Application of Discrete Event Simulation with Dynamic Queuing.

PubMed

Standfield, L; Comans, T; Raymer, M; O'Leary, S; Moretto, N; Scuffham, P

2016-08-01

Hospital outpatient orthopaedic services traditionally rely on medical specialists to assess all new patients to determine appropriate care. This has resulted in significant delays in service provision. In response, Orthopaedic Physiotherapy Screening Clinics and Multidisciplinary Services (OPSC) have been introduced to assess and co-ordinate care for semi- and non-urgent patients. To compare the efficiency of delivering increased semi- and non-urgent orthopaedic outpatient services through: (1) additional OPSC services; (2) additional traditional orthopaedic medical services with added surgical resources (TOMS + Surg); or (3) additional TOMS without added surgical resources (TOMS - Surg). A cost-utility analysis using discrete event simulation (DES) with dynamic queuing (DQ) was used to predict the cost effectiveness, throughput, queuing times, and resource utilisation, associated with introducing additional OPSC or TOMS ± Surg versus usual care. The introduction of additional OPSC or TOMS (±surgery) would be considered cost effective in Australia. However, OPSC was the most cost-effective option. Increasing the capacity of current OPSC services is an efficient way to improve patient throughput and waiting times without exceeding current surgical resources. An OPSC capacity increase of ~100 patients per month appears cost effective (A$8546 per quality-adjusted life-year) and results in a high level of OPSC utilisation (98 %). Increasing OPSC capacity to manage semi- and non-urgent patients would be cost effective, improve throughput, and reduce waiting times without exceeding current surgical resources. Unlike Markov cohort modelling, microsimulation, or DES without DQ, employing DES-DQ in situations where capacity constraints predominate provides valuable additional information beyond cost effectiveness to guide resource allocation decisions.

Lévitation magnétique par association d'aimants permanents et de supraconducteurs à haute température critique

NASA Astrophysics Data System (ADS)

Hiebel, P.; Tixador, P.; Chaud, X.

1995-06-01

Since their discovery in the years 1986/87, the high critical temperature superconductors have reached nowadays performances interesting enough to conceive passive magnetic bearings and suspensions which would combined permanent magnets and naturally stable superconducting pellets. After underlining the principal factors that affect the superconductormagnet interaction, different experimental results are given about vertical and axial forces with some stiffness values. The magnetization curve of a superconductor help to understand the hysteretic behavior of the force as a function of the distance between superconductor and magnet. So called simple and hybrid structures of superconducting magnetic suspension are presented. Finally simple numerical simulations allow to draw some interesting conclusions about both geometry and best fitting structure of permanent magnets. Depuis leur découverte dans les années 1986/87, les supraconducteurs à haute température critique ont désormais atteint des performances intéressantes et rendent envisageables des paliers et suspensions magnétiques passives associant aimants permanents et pastilles supraconductrices naturellement stables. Après avoir indiqué les termes importants influençant l'interaction supraconducteur - aimant, différents relevés expérimentaux sont donnés pour les forces verticales et transversales avec quelques valeurs de raideurs. La courbe d'aimantation d'un supraconducteur permet de comprendre le comportement hystérétique de la force en fonction de la distance supraconducteur-aimant. Les structures dites simple et hybride des suspensions magnétiques supraconductrices sont présentées. Enfin quelques simulations numériques simples permettent de dégager quelques conclusions intéressantes quant aux géométries respectives et aux structures d'aimants permanents les mieux adaptées.

A discrete event simulation to model the cost-utility of fingolimod and natalizumab in rapidly evolving severe relapsing-remitting multiple sclerosis in the UK.

PubMed

Montgomery, Stephen M; Maruszczak, Maciej J; Slater, David; Kusel, Jeanette; Nicholas, Richard; Adlard, Nicholas

2017-05-01

Two disease-modifying therapies are licensed in the EU for use in rapidly-evolving severe (RES) relapsing-remitting multiple sclerosis (RRMS), fingolimod and natalizumab. Here a discrete event simulation (DES) model to analyze the cost-effectiveness of natalizumab and fingolimod in the RES population, from the perspective of the National Health Service (NHS) in the UK, is reported. A DES model was developed to track individual RES patients, based on Expanded Disability Status Scale scores. Individual patient characteristics were taken from the RES sub-groups of the pivotal trials for fingolimod. Utility data were in line with previous models. Published costs were inflated to NHS cost year 2015. Owing to the confidential patient access scheme (PAS) discount applied to fingolimod in the UK, a range of discount levels were applied to the fingolimod list price, to capture the likelihood of natalizumab being cost-effective in a real-world setting. At the lower National Institute of Health and Care Excellence (NICE) threshold of £20,000/quality-adjusted life year (QALY), fingolimod only required a discount greater than 0.8% of list price to be cost-effective. At the upper threshold of £30,000/QALY employed by the NICE, fingolimod was cost-effective if the confidential discount is greater than 2.5%. Sensitivity analyses conducted using fingolimod list-price showed the model to be most sensitive to changes in the cost of each drug, particularly fingolimod. The DES model shows that only a modest discount to the UK fingolimod list-price is required to make fingolimod a more cost-effective option than natalizumab in RES RRMS.

Galaxy bias from the Dark Energy Survey Science Verification data: combining galaxy density maps and weak lensing maps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, C.; Pujol, A.; Gaztañaga, E.

We measure the redshift evolution of galaxy bias from a magnitude-limited galaxy sample by combining the galaxy density maps and weak lensing shear maps for amore » $$\\sim$$116 deg$$^{2}$$ area of the Dark Energy Survey (DES) Science Verification data. This method was first developed in Amara et al. (2012) and later re-examined in a companion paper (Pujol et al., in prep) with rigorous simulation tests and analytical treatment of tomographic measurements. In this work we apply this method to the DES SV data and measure the galaxy bias for a magnitude-limited galaxy sample. We find the galaxy bias and 1$$\\sigma$$ error bars in 4 photometric redshift bins to be 1.33$$\\pm$$0.18 (z=0.2-0.4), 1.19$$\\pm$$0.23 (z=0.4-0.6), 0.99$$\\pm$$0.36 ( z=0.6-0.8), and 1.66$$\\pm$$0.56 (z=0.8-1.0). These measurements are consistent at the 1-2$$\\sigma$$ level with mea- surements on the same dataset using galaxy clustering and cross-correlation of galaxies with CMB lensing. In addition, our method provides the only $$\\sigma_8$$-independent constraint among the three. We forward-model the main observational effects using mock galaxy catalogs by including shape noise, photo-z errors and masking effects. We show that our bias measurement from the data is consistent with that expected from simulations. With the forthcoming full DES data set, we expect this method to provide additional constraints on the galaxy bias measurement from more traditional methods. Furthermore, in the process of our measurement, we build up a 3D mass map that allows further exploration of the dark matter distribution and its relation to galaxy evolution.« less

Using Variability to Search for Lensed Quasars in the Dark Energy Survey

NASA Astrophysics Data System (ADS)

Buckley-Geer, Elizabeth J.; Dark Energy Survey Collaboration

2014-01-01

The Dark Energy Survey (DES) has just started its first season of a 5 year program using the DECam instrument on the Blanco 4m telescope at CTIO. Over the course of the 5 year survey we expect to discover about 120 lensed quasars brighter than i=21, including 20 high information-content quads (third brightest image required to be i<21). Strongly lensed quasars can be used to measure cosmological parameters. The time delays between the multiple images can be measured via dedicated monitoring campaigns, while the gravitational potential of the lensing galaxy and of structures along the line of sight can be modeled and measured using deep high resolution imaging and spectroscopy. The combination of these observables enables a distance, known as the time-delay distance (a combination of angular diameter distances) to be measured, which in turn can be converted into a measurement of cosmological parameters including those describing the Dark Energy equation of state. The first step in this measurement is to identify the lensed quasars. Traditionally, quasar candidates have been identified by their blue u-g color which allows them to be separated from the much more numerous stellar contaminants. However, the Dark Energy Survey does not take data in the u-band so other techniques must be employed. One such technique is based on the instrinsic variability of quasars (Schmidt et al, 2010, ApJ 714 1194). We have simulated what we would expect for the DES observing cadence in the first two seasons where we expect four visits to a given patch of sky spread over the two years. We will show results from the simulations as well as a first look at the data from the Science Verification phase of DES.

Analysis of Freight Transport Strategies and Methodologies [summary

DOT National Transportation Integrated Search

2017-12-01

Transportation planners constantly examine traffic flows to see if current roadway layouts are serving traffic needs. For freight hauling, this presents one issue on the open road, but a much different issue as these large vehicles approach their des...

Influence of dissimilatory metal reduction on fate of organic and metal contaminants in the subsurface

NASA Astrophysics Data System (ADS)

Lovley, Derek R.; Anderson, Robert T.

Dissimilatory Fe(III)-reducing microorganisms have the ability to destroy organic contaminants under anaerobic conditions by oxidizing them to carbon dioxide. Some Fe(III)-reducing microorganisms can also reductively dechlorinate chlorinated contaminants. Fe(III)-reducing microorganisms can reduce a variety of contaminant metals and convert them from soluble forms to forms that are likely to be immobilized in the subsurface. Studies in petroleum-contaminated aquifers have demonstrated that Fe(III)-reducing microorganisms can be effective agents in removing aromatic hydrocarbons from groundwater under anaerobic conditions. Laboratory studies have demonstrated the potential for Fe(III)-reducing microorganisms to remove uranium from contaminated groundwaters. The activity of Fe(III)-reducing microorganisms can be stimulated in several ways to enhance organic contaminant oxidation and metal reduction. Molecular analyses in both field and laboratory studies have demonstrated that microorganisms of the genus Geobacter become dominant members of the microbial community when Fe(III)-reducing conditions develop as the result of organic contamination, or when Fe(III) reduction is artificially stimulated. These results suggest that further understanding of the ecophysiology of Geobacter species would aid in better prediction of the natural attenuation of organic contaminants under anaerobic conditions and in the design of strategies for the bioremediation of subsurface metal contamination. Des micro-organismes simulant la réduction du fer ont la capacité de détruire des polluants organiques dans des conditions anérobies en les oxydant en dioxyde de carbone. Certains micro-organismes réducteurs de fer peuvent aussi dé-chlorer par réduction des polluants chlorés. Des micro-organismes réducteurs de fer peuvent réduire tout un ensemble de métaux polluants et les faire passer de formes solubles à des formes qui sont susceptibles d'être immobilisées dans le milieu souterrain. Des études d'aquifères pollués par du pétrole ont montré que des micro-organismes réducteurs de fer peuvent être des agents efficaces pour éliminer les hydrocarbures aromatiques des eaux souterraines dans des conditions anérobies. Des études en laboratoire ont montré que des micro-organismes réducteurs de fer avaient la capacité d'éliminer l'uranium d'eaux souterraines polluées. L'activité de micro-organismes réducteurs de fer peut être stimulée de différentes manières pour augmenter l'oxydation de polluants organiques et la réduction de métaux. Des analyses moléculaires concernant des études de terrain et de laboratoire ont montré que des micro-organismes du genre Geobacter deviennent les membres dominants de la communauté microbienne quand les conditions de réduction en Fe(III) sont réalisées à la suite d'une pollution organique, ou lorsque la réduction en Fe(III) est stimulée artificiellement. Ces résultats laissent penser que des connaissances supplémentaires sur l'écophysiologie des espèces Geobacter devraient aider à une meilleure prédiction de la diminution naturelle des teneurs en polluants organiques dans des conditions anérobies, ainsi qu'à la définition de stratégies de dépollution biologique de pollutions souterraines par les métaux. Algunos microorganismos Fe(III)-reductores son capaces de destruir selectivamente determinados contaminantes orgánicos en condiciones anaerobias, oxidándolos a dióxido de carbono. Otros de estos microorganismos Fe(III)-reductores pueden reducir, bien compuestos clorados, bien una gran variedad de metales, que dejan de ser solubles y se inmovilizan en el subsuelo. Estudios realizados en acuéferos contaminados por petróleo muestran que los microorganismos Fe(III)-reductores pueden ser unos agentes muy eficientes para eliminar los hidrocarburos aromáticos de las aguas subterráneas en condiciones anaerobias, mientras que estudios de laboratorio muestran el potencial de estos microorganismos para eliminar uranio. La actividad de los microorganismos Fe(III)-reductores se puede estimular para conseguir una mayor eficiencia en la oxidación de contaminantes orgánicos y en la reducción de metales. Diversos análisis moleculares en estudios de campo y de laboratorio muestran que los microorganismos del género Geobacter se convierten en los miembros dominantes de la comunidad microbiana cuando se desarrollan condiciones Fe(III)-reductoras, bien como resultado de la contaminación orgánica, bien por estimulación artificial. En consecuencia, se hace necesario un mayor entendimiento de la ecofisiologéa de los microorganismos del género Geobacter para mejorar las predicciones sobre atenuación natural de los contaminantes orgánicos bajo condiciones anaerobias y para el diseño de estrategias de biorremediación del subsuelo en los casos de contaminación por metales.

Rationale of a novel study design for the BIOFLOW V study, a prospective, randomized multicenter study to assess the safety and efficacy of the Orsiro sirolimus-eluting coronary stent system using a Bayesian approach.

PubMed

Doros, Gheorghe; Massaro, Joseph M; Kandzari, David E; Waksman, Ron; Koolen, Jacques J; Cutlip, Donald E; Mauri, Laura

2017-11-01

Traditional study design submitted to the Food and Drug Administration to test newer drug-eluting stents (DES) for marketing approval is the prospective randomized controlled trial. However, several DES have extensive clinical data from trials conducted outside the United States that have led to utilization of a novel design using the Bayesian approach. This design was proposed for testing DES with bioresorbable polymer compared with DES most commonly in use today that use durable polymers for drug elution. This prospective, multicenter, randomized, controlled trial is designed to assess the safety and efficacy of the Orsiro bioresorbable polymer sirolimus-eluting stent (BP SES). Up to 1,334 subjects with up to 3 de novo or restenotic coronary artery lesions who qualify for percutaneous coronary intervention with stenting will be randomized 2:1 to the BP SES versus the Xience durable polymer everolimus-eluting stent (DP EES). Data from this trial will be combined with data from 2 similarly designed trials that also randomize subjects to BP SES and DP EES (BIOFLOW II, N=452 and BIOFLOW IV, N=579) by using a Bayesian approach. The primary end point is target lesion failure at 12 months post index procedure, defined as cardiac death, target vessel myocardial infarction, or clinically driven target lesion revascularization, and the primary analysis is a test of noninferiority of the BP SES versus DP EES on the primary end point according to a noninferiority delta of 3.85%. Secondary end points include stent thrombosis and the individual components of target lesion failure. Subjects will be followed for 5 years after randomization. The BIOFLOW V trial offers an opportunity to assess clinical outcomes in patients treated with coronary revascularization using the Orsiro BP SES relative to a commonly used DP EES. The use of a Bayesian analysis combines a large randomized cohort of patients 2 two smaller contributing randomized trials to augment the efficiency of the comparison. Copyright © 2017 Elsevier Inc. All rights reserved.

Broca’s Area as a Pre-articulatory Phonetic Encoder: Gating the Motor Program

PubMed Central

Ferpozzi, Valentina; Fornia, Luca; Montagna, Marcella; Siodambro, Chiara; Castellano, Antonella; Borroni, Paola; Riva, Marco; Rossi, Marco; Pessina, Federico; Bello, Lorenzo; Cerri, Gabriella

2018-01-01

The exact nature of the role of Broca’s area in control of speech and whether it is exerted at the cognitive or at the motor level is still debated. Intraoperative evidence of a lack of motor responses to direct electrical stimulation (DES) of Broca’s area and the observation that its stimulation induces a “speech arrest” without an apparent effect on the ongoing activity of phono-articulatory muscles, raises the argument. Essentially, attribution of direct involvement of Broca’s area in motor control of speech, requires evidence of a functional connection of this area with the phono-articulatory muscles’ motoneurons. With a quantitative approach we investigated, in 20 patients undergoing surgery for brain tumors, whether DES delivered on Broca’s area affects the recruitment of the phono-articulatory muscles’ motor units. The electromyography (EMG) of the muscles active during two speech tasks (object picture naming and counting) was recorded during and in absence of DES on Broca’s area. Offline, the EMG of each muscle was analyzed in frequency (power spectrum, PS) and time domain (root mean square, RMS) and the two conditions compared. Results show that DES on Broca’s area induces an intensity-dependent “speech arrest.” The intensity of DES needed to induce “speech arrest” when applied on Broca’s area was higher when compared to the intensity effective on the neighboring pre-motor/motor cortices. Notably, PS and RMS measured on the EMG recorded during “speech arrest” were superimposable to those recorded at baseline. Partial interruptions of speech were not observed. Speech arrest was an “all-or-none” effect: muscle activation started only by removing DES, as if DES prevented speech onset. The same effect was observed when stimulating directly the subcortical fibers running below Broca’s area. Intraoperative data point to Broca’s area as a functional gate authorizing the phonetic translation to be executed by the motor areas. Given the absence of a direct effect on motor units recruitment, a direct control of Broca’s area on the phono-articulatory apparatus seems unlikely. Moreover, the strict correlation between DES-intensity and speech prevention, might attribute this effect to the inactivation of the subcortical fibers rather than to Broca’s cortical neurons. PMID:29520225

The effects of multiple aerospace environmental stressors on human performance

NASA Technical Reports Server (NTRS)

Popper, S. E.; Repperger, D. W.; Mccloskey, K.; Tripp, L. D.

1992-01-01

An extended Fitt's law paradigm reaction time (RT) task was used to evaluate the effects of acceleration on human performance in the Dynamic Environment Simulator (DES) at Armstrong Laboratory, Wright-Patterson AFB, Ohio. This effort was combined with an evaluation of the standard CSU-13 P anti-gravity suit versus three configurations of a 'retrograde inflation anti-G suit'. Results indicated that RT and error rates increased 17 percent and 14 percent respectively from baseline to the end of the simulated aerial combat maneuver and that the most common error was pressing too few buttons.

Supported Silver Nanoparticle and Near-Interface Solution Dynamics in a Deep Eutectic Solvent

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammons, Joshua A.; Ustarroz, Jon; Muselle, Thibault

2016-01-28

Type III deep eutectic solvents (DES) have attracted significant interest as both environmentally friendly and functional solvents that are, in some ways, advantageous to traditional aqueous systems. While these solvents continue to produce remarkable thin films and nanoparticle assemblies, their interactions with metallic surfaces are complex and difficult to manipulate. In this study, the near-surface region (2–600 nm) of a carbon surface is investigated immediately following silver nanoparticle nucleation and growth. This is accomplished, in situ, using a novel grazing transmission small-angle X-ray scattering approach with simultaneous voltammetry and electrochemical impedance spectroscopy. With this physical and electrochemical approach, the timemore » evolution of three distinct surface interaction phenomena is observed: aggregation and coalescence of Ag nanoparticles, multilayer perturbations induced by nonaggregated Ag nanoparticles, and a stepwise transport of dissolved Ag species from the carbon surface. The multilayer perturbations contain charge-separated regions of positively charged choline-ethylene and negatively charged Ag and Cl species. Both aggregation-coalescence and the stepwise decrease in Ag precursor near the surface are observed to be very slow (~2 h) processes, as both ion and particle transport are significantly impeded in a DES as compared to aqueous electrolytes. Finally, altogether, this study shows how the unique chemistry of the DES changes near the surface and in the presence of nanoparticles that adsorb the constituent species.« less

Development of Causative Treatment Strategies for Lacrimal Gland Insufficiency by Tissue Engineering and Cell Therapy. Part 2: Reconstruction of Lacrimal Gland Tissue: What Has Been Achieved So Far and What Are the Remaining Challenges?

PubMed

Massie, Isobel; Dietrich, Jana; Roth, Mathias; Geerling, Gerd; Mertsch, Sonja; Schrader, Stefan

2016-10-01

The lacrimal gland is located in the upper temporal compartment of the orbita, and along with the ocular surface, eye lids, and sensory and motor nerves forms the lacrimal functional unit (LFU). The LFU is responsible for producing, distributing, and maintaining the tear film in order to maintain a smooth, moist, and regular ocular surface epithelium such that appropriate refractive properties are achieved and the eyeball is protected against dust, debris, and pathogens. If the main lacrimal gland is impaired (due to either disease or injury), this balance is disrupted, and severe quantitative dry eye syndrome (DES) can develop. DES treatments remain palliative, with the most commonly used therapies being based on tear substitution, tear retention, and control of inflammation on the ocular surface. Causative treatments such as salivary gland transplantation have shown to reduce symptoms in very severe cases, however can cause problems on the ocular surface due to different properties of saliva and tears. Therefore, causative approaches for treating DES by regeneration or reconstruction of lacrimal gland tissue depending on disease severity seem highly appealing. This article reviews current approaches for in vitro reconstruction of lacrimal gland tissue. Finally, the limitations that must be overcome before a new, tissue-engineered therapy may be delivered to clinic will be discussed.

Formulation, caracterisation, modelisation et prevision du comportement thermomecanique des pieces plastiques et composites de fibres de bois : Application aux engrenages =

NASA Astrophysics Data System (ADS)

Mijiyawa, Faycal

Cette etude permet d'adapter des materiaux composites thermoplastiques a fibres de bois aux engrenages, de fabriquer de nouvelles generations d'engrenages et de predire le comportement thermique de ces engrenages. Apres une large revue de la litterature sur les materiaux thermoplastiques (polyethylene et polypropylene) renforces par les fibres de bois (bouleau et tremble), sur la formulation et l'etude du comportement thermomecanique des engrenages en plastique-composite; une relation a ete etablie avec notre presente these de doctorat. En effet, beaucoup d'etudes sur la formulation et la caracterisation des materiaux composites a fibres de bois ont ete deja realisees, mais aucune ne s'est interessee a la fabrication des engrenages. Les differentes techniques de formulation tirees de la litterature ont facilite l'obtention d'un materiau composite ayant presque les memes proprietes que les materiaux plastiques (nylon, acetal...) utilises dans la conception des engrenages. La formulation des materiaux thermoplastiques renforces par les fibres de bois a ete effectuee au Centre de recherche en materiaux lignocellulosiques (CRML) de l'Universite du Quebec a Trois-Rivieres (UQTR), en collaboration avec le departement de Genie Mecanique, en melangeant les composites avec deux rouleaux sur une machine de type Thermotron-C.W. Brabender (modele T-303, Allemand) ; puis des pieces ont ete fabriquees par thermocompression. Les thermoplastiques utilises dans le cadre de cette these sont le polypropylene (PP) et le polyethylene haute densite (HDPE), avec comme renfort des fibres de bouleau et de tremble. A cause de l'incompatibilite entre la fibre de bois et le thermoplastique, un traitement chimique a l'aide d'un agent de couplage a ete realise pour augmenter les proprietes mecaniques des materiaux composites. Pour les composites polypropylene/bois : (1) Les modules elastiques et les contraintes a la rupture en traction des composites PP/bouleau et PP/tremble evoluent lineairement en fonction du taux de fibres, avec ou sans agent de couplage (Maleate de polypropylene MAPP). De plus, l'adherence entre les fibres de bois et le plastique est amelioree en utilisant seulement 3 % MAPP, entrainant donc une augmentation de la contrainte maximale bien qu'aucun effet significatif ne soit observe sur le module d'elasticite. (2) Les resultats obtenus montrent que, en general, les proprietes en traction des composites polypropylene/bouleau, polypropylene/tremble et polypropylene/bouleau/ tremble sont tres semblables. Les composites plastique-bois (WPCs), en particulier ceux contenant 30 % et 40 % de fibres, ont des modules elastiques plus eleves que certains plastiques utilises dans l'application des engrenages (ex. Nylon). Pour les composites polyethylene/bois, avec 3%Maleate de polyethylene (MAPE): (1) Tests de traction : le module elastique passe de 1.34 GPa a 4.19 GPa pour le composite HDPE/bouleau, alors qu'il passe de 1.34 GPa a 3.86 GPa pour le composite HDPE/tremble. La contrainte maximale passe de 22 MPa a 42.65 MPa pour le composite HDPE/bouleau, alors qu'elle passe de 22 MPa a 43.48 MPa pour le composite HDPE/tremble. (2) Tests de flexion : le module elastique passe de 1.04 GPa a 3.47 GPa pour le composite HDPE/bouleau et a 3.64 GPa pour le composite HDPE/tremble. La contrainte maximale passe de 23.90 MPa a 66.70 MPa pour le composite HDPE/bouleau, alors qu'elle passe a 59.51 MPa pour le composite HDPE/tremble. (3) Le coefficient de Poisson determine par impulsion acoustique est autour de 0.35 pour tous les composites HDPE/bois. (4) Le test de degradation thermique TGA nous revele que les materiaux composites presentent une stabilite thermique intermediaire entre les fibres de bois et la matrice HDPE. (5) Le test de mouillabilite (angle de contact) revele que l'ajout de fibres de bois ne diminue pas de facon significative les angles de contact avec de l'eau parce que les fibres de bois (bouleau ou tremble) semblent etre enveloppees par la matrice sur la surface des composites, comme le montrent des images prises au microscope electronique a balayage MEB. (6) Le modele de Lavengoof-Goettler predit mieux le module elastique du composite thermoplastique/bois. (7) Le HDPE renforce par 40 % de bouleau est mieux adapte pour la fabrication des engrenages, car le retrait est moins important lors du refroidissement au moulage. La simulation numerique semble mieux predire la temperature d'equilibre a la vitesse de 500 tr/min; alors qu'a 1000 tr/min, on remarque une divergence du modele. (Abstract shortened by ProQuest.). None None None None None None None None

Clustering redshift distributions for the Dark Energy Survey

NASA Astrophysics Data System (ADS)

Helsby, Jennifer

Accurate determination of photometric redshifts and their errors is critical for large scale structure and weak lensing studies for constraining cosmology from deep, wide imaging surveys. Current photometric redshift methods suffer from bias and scatter due to incomplete training sets. Exploiting the clustering between a sample of galaxies for which we have spectroscopic redshifts and a sample of galaxies for which the redshifts are unknown can allow us to reconstruct the true redshift distribution of the unknown sample. Here we use this method in both simulations and early data from the Dark Energy Survey (DES) to determine the true redshift distributions of galaxies in photometric redshift bins. We find that cross-correlating with the spectroscopic samples currently used for training provides a useful test of photometric redshifts and provides reliable estimates of the true redshift distribution in a photometric redshift bin. We discuss the use of the cross-correlation method in validating template- or learning-based approaches to redshift estimation and its future use in Stage IV surveys.

Solution des systemes de controle de grandes dimensions basee sur les boucles de retroaction dans la simulation des reseaux electriques

NASA Astrophysics Data System (ADS)

Mugombozi, Chuma Francis

The generation of electrical energy, as well as its transportation and consumption, requires complex control systems for the regulation of power and frequency. These control systems must take into account, among others, new energy sources such as wind energy and new technologies for interconnection by high voltage DC link. These control systems must be able to monitor and achieve such regulation in accordance with the dynamics of the energy source, faults and other events which may induce transients phenomena into the power network. Such transients conditions have to be analyzed using the most accurate and detailed hence, complex models of control system. In addition, in the feasibility study phase, the calibration or the setup of equipment as well as in the operation of the power network, one may require decision aid tools for engineers. This includes, for instance, knowledge of energy dissipated into the arresters in transient analysis. These tools use simulation programs data as inputs and may require that complex functions be solved with numerical methods. These functions are part of control system in computer simulator. Moreover, the simulation evolves in a broader context of the development of digital controller, distributed and parallel high performance computing and rapid evolutions in computer (multiprocessor) technology. In such context, a continuing improvement of the control equations solver is welcomed. Control systems are modelled using ax=b simultaneous system of equations. These equations are sometimes non-linear with feedback loops and thus require iterative Newton methods, including the formation of a Jacobian matrix and ordering as well as processing by graph theory tools. The proposed approach is based on the formulation of a reduced rank Jacobian matrix. The dimension is reduced up to the count of feedback loops. With this new approach, gains in computation speed are expected without compromising its accuracy when compared to classical full rank Jacobian matrix representation. A directed graph representation is adopted and a proper approach for detecting and removing cycles within the graph is introduced. A condition of all zero eigenvalues of adjacency matrix of the graph is adopted. The transformation of the graph of controls with no cycle permits a formulation of control equations for only feedback points. This yields a general feedback interconnection (GFBI) representation of control, which is the main contribution of this thesis. Methods for solving (non-linear) equations of control systems were deployed into the new GFBI approach. Five variants of the new approach were illustrated including firstly, a basic Newton method (1), a more robust one, the Dogleg method (2) and a fixed-point iterations method (3). I. The presented approach is implemented in Electromagnetic Transient program EMTP-RV and tested on practical systems of various types and levels of complexity: the PLL, an asynchronous machine with 87 blocks reduced to 23 feedback equations by GFBI, and 12 wind power plants integrated to the IEEE-39 buses system. Further analysis, which opens up avenues for future research includes comparison of the proposed approach against existing ones. With respect to the sole representation, it is shown that the proposed approach is equivalent to full classic representation of system of equations through a proper substitution process which complies with topological sequence and by skipping feedback variable identified by GFBI. Moreover, a second comparison with state space based approach, such as that in MATLAB/Simulink, shows that output evaluation step in state-space approach with algebraic constraints is similar to the GFBI. The algebraic constraints are similar to feedback variables. A difference may arise, however, when the number of algebraic constraints is not the optimal number of cuts for the GFBI method: for the PLL, for example, MATLAB/Simulink generated 3 constraints while the GFBI generated only 2. The GFBI method may offer some advantages in this case. A last analysis axis prompted further work in initialization. It is shown that GFBI method may modifies the convergence properties of iterations of the Newton method. The Newton- Kantorovich theorem, using bounds on the norms of the Jacobian, has been applied to the proposed GFBI and classic full representation of control equations. The expressions of the Jacobian norms have been established for generic cases using Coates graph. It appears from the analysis of a simple case, for the same initial conditions, the behaviour of the Newton- Kantorovich theorem differs in both cases. These differences may also be more pronounced in the non-linear case. Further work would be useful to investigate this aspect and, eventually, pave the way to new initialization approaches. Despite these limitations, not to mention areas for improvement in further work, one notes the contribution of this thesis to improve the gain of time on simulation for the solution of control systems. (Abstract shortened by UMI.).

A scenario neutral approach to assess low flow sensitivity to climate change

NASA Astrophysics Data System (ADS)

Sauquet, Eric; Prudhomme, Christel

2015-04-01

Most impact studies of climate change on river flow regime are performed following top-down approaches, where changes in hydrological characteristics are obtained from rainfall-runoff models forced by downscaled projections provided by GCMs. However, such approaches are not always considered robust enough to bridge the gap between climate research and stake holders needs to develop relevant adaptation strategy (Wilby et al., 2014). Alternatively, 'bottom-up' approaches can be applied to climate change impact studies on water resources to assess the intrinsic vulnerability of the catchments and ultimately help to prioritize adaptation actions for areas highly sensitive to small deviations from the present-day climate conditions. A general framework combining the scenario-neutral methodology developed by Prudhomme et al. (2010) and climate elasticity analyses (Sankarasubramanian et al., 2001) is presented and applied to measure the vulnerability of low flows and droughts on a large dataset of more than 400 French gauged basins. The different steps involved in the suggested framework are: - Calibration of the GR5J rainfall runoff model (Pushpalatha et al., 2011) against observations, - Identification of the main climate factors influencing low flows, - Definition of the sensitivity domain for precipitation (P), temperature (T) and potential evapotranspiration (PE) scenarios consistent with most recent climate change projections, - Derivation of the response surface describing changes in low flow and drought regime in terms of severity, duration and seasonality (Catalogne, 2012), - Uncertainty assessment. Results are the basis for a classification of river basins according to their sensitivity at national scale and for discussions on adaptation requirements with stakeholders. Catalogne C (2012) Amélioration des méthodes de prédétermination des débits de référence d'étiage en sites peu ou pas jaugés. PHD thesis, Université Joseph Fourier, Grenoble, 285 pp. Pushpalatha R, Perrin C, Le Moine N, Mathevet T, Andreassian V (2011) A downward structural sensitivity analysis of hydrological models to improve low-flow simulation. Journal of Hydrology 411.1-2. Prudhomme C, Wilby LR, Crooks SM, Kay AL, Reynard NS (2010) Scenario-neutral approach to climate change impact studies: application to flood risk. Journal of Hydrology, 390:198-209. Sankarasubramanian A, Vogel RM, Limbrunner JF (2001) Climate elasticity of streamflow in the United States. Water Resources Research, 3(6):1771-1781. Wilby R, Dawson C, Murphy C, O'Connor P., Hawkins E. (2014) The Statistical DownScaling Model - Decision Centric (SDSM-DC): conceptual basis and applications. Climate Research, 61(3):259-276.

3D Neutronic Analysis in MHD Calculations at ARIES-ST Fusion Reactors Systems

NASA Astrophysics Data System (ADS)

Hançerliogulları, Aybaba; Cini, Mesut

2013-10-01

In this study, we developed new models for liquid wall (FW) state at ARIES-ST fusion reactor systems. ARIES-ST is a 1,000 MWe fusion reactor system based on a low aspect ratio ST plasma. In this article, we analyzed the characteristic properties of magnetohydrodynamics (MHD) and heat transfer conditions by using Monte-Carlo simulation methods (ARIES Team et al. in Fusion Eng Des 49-50:689-695, 2000; Tillack et al. in Fusion Eng Des 65:215-261, 2003) . In fusion applications, liquid metals are traditionally considered to be the best working fluids. The working liquid must be a lithium-containing medium in order to provide adequate tritium that the plasma is self-sustained and that the fusion is a renewable energy source. As for Flibe free surface flows, the MHD effects caused by interaction with the mean flow is negligible, while a fairly uniform flow of thick can be maintained throughout the reactor based on 3-D MHD calculations. In this study, neutronic parameters, that is to say, energy multiplication factor radiation, heat flux and fissile fuel breeding were researched for fusion reactor with various thorium and uranium molten salts. Sufficient tritium amount is needed for the reactor to work itself. In the tritium breeding ratio (TBR) >1.05 ARIES-ST fusion model TBR is >1.1 so that tritium self-sufficiency is maintained for DT fusion systems (Starke et al. in Fusion Energ Des 84:1794-1798, 2009; Najmabadi et al. in Fusion Energ Des 80:3-23, 2006).

Microbial populations in contaminant plumes

NASA Astrophysics Data System (ADS)

Haack, Sheridan K.; Bekins, Barbara A.

Efficient biodegradation of subsurface contaminants requires two elements: (1) microbial populations with the necessary degradative capabilities, and (2) favorable subsurface geochemical and hydrological conditions. Practical constraints on experimental design and interpretation in both the hydrogeological and microbiological sciences have resulted in limited knowledge of the interaction between hydrogeological and microbiological features of subsurface environments. These practical constraints include: (1) inconsistencies between the scales of investigation in the hydrogeological and microbiological sciences, and (2) practical limitations on the ability to accurately define microbial populations in environmental samples. However, advances in application of small-scale sampling methods and interdisciplinary approaches to site investigations are beginning to significantly improve understanding of hydrogeological and microbiological interactions. Likewise, culture-based and molecular analyses of microbial populations in subsurface contaminant plumes have revealed significant adaptation of microbial populations to plume environmental conditions. Results of recent studies suggest that variability in subsurface geochemical and hydrological conditions significantly influences subsurface microbial-community structure. Combined investigations of site conditions and microbial-community structure provide the knowledge needed to understand interactions between subsurface microbial populations, plume geochemistry, and contaminant biodegradation. La biodégradation efficace des polluants souterrains requiert deux éléments: des populations microbiennes possédant les aptitudes nécessaires à la dégradation, et des conditions géochimiques et hydrologiques souterraines favorables. Des contraintes pratiques sur la conception et l'interprétation des expériences à la fois en microbiologie et en hydrogéologie ont conduit à une connaissance limitée des interactions entre les phénomènes hydrogéologiques et microbiologiques des environnements souterrains. Ces contraintes pratiques sont dues à des contradictions entre les échelles d'étude de l'hydrogéologie et de la microbiologie et à des limitations pratiques sur la capacitéà définir avec précision les populations microbiennes dans les échantillons. Cependant, des progrès dans l'application de méthodes d'échantillonnage à l'échelle locale et des approches pluridisciplinaires des études de terrain ont commencéà améliorer de façon significative notre compréhension des interactions hydrogéologiques et microbiologiques. De plus, les analyses moléculaires et sur les cultures des populations microbiennes présentes dans les panaches de pollution souterraine ont mis en évidence une adaptation significative de ces populations aux conditions environnementales du panache. Les résultats d'études récentes laissent penser que la variabilité des conditions géochimiques et hydrologiques souterraines influence significativement la structure des communautés microbiennes souterraines. Des recherches combinées sur les conditions de terrain et sur la structure des communautés microbiennes apportent les informations nécessaires à la compréhension des interactions entre les populations microbiennes souterraines, la géochimie du panache et la biodégradation du polluant. Para que la biodegradación de los contaminantes en el subsuelo sea eficiente se requiere: (1) una población microbiana con capacidad de degradación y (2) unas condiciones hidrológicas y geoquímicas favorables. Las restricciones de tipo práctico en los diseños y la interpretación de experimentos, tanto hidrogeológicos como microbiológicos, han dado lugar a un conocimiento limitado de la interrelación entre estas dos ciencias por lo que respecta al subsuelo. Estas restricciones incluyen: (1) inconsistencias entre las escalas de investigación en ambas ciencias (hidrogeología y microbiología) y (2) limitaciones prácticas para definir poblaciones microbianas en las muestras. Sin embargo, los avances en la aplicación de métodos de muestreo a pequeña escala y las investigaciones de campo con equipos interdisciplinares están mejorando significativamente el conocimiento de las interacciones entre hidrogeología y microbiología. Del mismo modo, los análisis moleculares y de cultivos sobre poblaciones microbianas en penachos contaminados han mostrado la adaptación de los microbios a las condiciones naturales. Estudios recientes sugieren que la variabilidad en las condiciones geoquímicas e hidrogeológicas del subsuelo afecta enormemente la estructura de la comunidad microbiana. Las investigaciones que combinan las condiciones del medio con la estructura de la comunidad microbiana proporcionarán el conocimiento necesario para entender las complejas relaciones entre las poblaciones microbianas subsuperficiales, la geoquímica de los penachos de contaminación y la biodegradación de los contaminantes.

Pour une Sociologie des Apprentissages (Toward a Sociology of Learning)

ERIC Educational Resources Information Center

Porcher, Louis

1977-01-01

A language, a social practice, cannot be taught or learned apart from determining sociological factors. The effect of this sociological understanding on foreign language methodology, particularly the functional approach, and learner-centered education is discussed. (Text is in French.) (AMH)

Safety First

ERIC Educational Resources Information Center

Taft, Darryl

2011-01-01

Ned Miller does not take security lightly. As director of campus safety and emergency management at the Des Moines Area Community College (DMACC), any threat requires serious consideration. As community college administrators adopt a more proactive approach to campus safety, many institutions are experimenting with emerging technologies, including…

La grammaire dans la formation des instituteurs (Grammar in the Training of Elementary School Teachers).

ERIC Educational Resources Information Center

Verdelhan, Michele; Verdelhan, Michel

1978-01-01

Examines the variety of approaches currently found in the teaching of French as a native language in the French elementary school system and in teacher colleges, in the wake of the rise of linguistics. (AM)

Le role du phytoplancton de petite taille (<20 mum) dans les variations des proprietes optiques des eaux du Saint-Laurent

NASA Astrophysics Data System (ADS)

Mas, Sebastien

Les mesures satellitaires de couleur des oceans sont largement determinees par les proprietes optiques inherentes (IOPs) des eaux de surface. D'autre part, le phytoplancton de petite taille (<20 mum) est le plus souvent dominant dans les oceans, et peut donc etre une source importante de variation des IOPs dans les oceans. Dans ce contexte, le but principal de ce doctorat etait de definir l'impact du phytoplancton (<20 mum) sur les variations des proprietes optiques de l'Estuaire et du Golfe du Saint-Laurent (Canada). Afin d'atteindre cet objectif, il etait necessaire de determiner en milieu controle les facteurs de variabilite des proprietes optiques cellulaires et des IOPs du phytoplancton (<20 mum) des eaux du Saint-Laurent, et d'evaluer la contribution du phytoplancton (<20 mum) aux proprietes optiques totales des eaux du Saint-Laurent. Des experiences en laboratoire ont montre que les variations des proprietes optiques des cellules phytoplanctoniques soumises a un cycle jour-nuit, ainsi qu'a des changements concomitants d'intensite lumineuse, peuvent contribuer significativement a la variabilite des proprietes optiques observee en milieu naturel. D'autres experiences ont, quant a elles, mis en evidence que les variations des proprietes optiques des cellules phytoplanctoniques dues aux phases de croissance peuvent alterer les IOPs des oceans, particulierement pendant les periodes de floraison. De plus, la presence de bacteries et de particules detritiques peut egalement affecter la variabilite des IOPs totales, notamment la diffusion. Au printemps, dans l'Estuaire et le Golfe du Saint-Laurent, la contribution du phytoplancton <20 mum aux IOPs presentait des differences regionales evidentes pour les proprietes d'absorption et de diffusion. En plus de la variabilite spatiale, les proprietes optiques cellulaires presentaient des variations journalieres, et ce particulierement pour le picophytoplancton. Enfin, la plupart des differences observees dans les proprietes biooptiques, particulierement l'absorption, etaient attribuables a la contribution du phytoplancton <20 mum. Ceci confirme l'importance de la structure de taille des communautes phytoplanctoniques dans les modeles bio-optiques appliques au Saint-Laurent. L'ensemble des resultats a permis de mettre en evidence l'importance des mecanismes de photoacclimatation et de synchronisation du cycle cellulaire du phytoplancton sur les variations journalieres des IOPs, ainsi que de l'etat physiologique relie au stade de croissance sur les variations temporelles a long terme des IOPs. De plus, le phytoplancton <20 mum contribue de maniere importante aux IOPs et a leur variabilite dans l'Estuaire et le Golfe du St-Laurent, et ce particulierement pour l'absorption. Cette etude de doctorat souligne donc l'importance du phytoplancton <20 mum sur la variabilite des IOPs des oceans.

Retinal plasma extravasation in streptozotocin-diabetic rats mediated by kinin B1 and B2 receptors

PubMed Central

Abdouh, M; Talbot, S; Couture, R; Hasséssian, H M

2008-01-01

Background and purpose: We investigated whether or not kinin receptors play a role in diabetic blood–retinal barrier breakdown, which is a leading cause of vision loss. Experimental approach: Blood–retinal barrier breakdown was quantified using Evans blue, and expression of kinin B1 receptor mRNA was measured using quantitative reverse transcrition-PCR. Diabetic rats (streptozotocin (STZ), 65 mg kg−1) received a single intraocular injection of bradykinin (BK) or des-Arg9-BK, alone, or in combination with antagonists for B1 (des-Arg10-Hoe140, R-715) and/or B2 (Hoe140) receptors, given intraocularly or intravenously (i.v.). Key results: In control rats, BK (0.1–10 nmol) dose-dependently increased plasma extravasation, which was inhibited by Hoe140 (0.2 nmol), whereas des-Arg9-BK (0.1 and 1 nmol) was without effect. B1 receptor mRNA was markedly increased in retinas of diabetic rats, and this was prevented by N-acetyl-L-cysteine (1 g kg−1 day−1 for 7 days). Plasma extravasation in retinas of STZ-diabetic rats was higher than in controls and enhanced by des-Arg9-BK. Response to des-Arg9-BK was inhibited by intraocular or i.v. injection of B1 receptor antagonists. Diabetes-induced plasma extravasation was inhibited only by a combination of des-Arg10-Hoe140 and Hoe 140 (100 nmol kg−1, i.v. 15 min earlier) or by R-715 (1 μmol kg−1, i.v.) injected daily for 7 days. Conclusions and implications: Kinin B1 receptors are upregulated in retinas of STZ-diabetic rats through a mechanism involving oxidative stress. Both kinin B1 and B2 receptors contribute to increased plasma extravasation in diabetic retinopathy. Chronic inhibition of both kinin receptors, possibly with antioxidant adjuvants, may be a novel therapeutic strategy for diabetic retinopathy. PMID:18311190

La planification préalable des soins pour les patients en pédiatrie

PubMed Central

2008-01-01

RÉSUMÉ Les progrès médicaux et technologiques ont permis d’ac-croître les taux de survie et d’améliorer la qualité de vie des nourrissons, des enfants et des adolescents ayant des maladies chroniques mettant la vie en danger. La planifi-cation préalable des soins inclut le processus relié aux discussions sur les traitements essentiels au maintien de la survie et la détermination des objectifs des soins de longue durée. Les dispensateurs de soins pédiatriques ont l’obligation éthique d’assimiler cet aspect des soins médicaux. Le présent document de principes vise à aider les dispensateurs de soins à discuter de la planification préalable des soins des patients pédiatriques dans diverses situations. La planification préalable des soins exige des communications efficaces afin de clarifier les objectifs des soins et de s’entendre sur les traitements pertinents ou non pour réaliser ces objectifs, y compris les mesures de réanimation et les mesures palliatives.

Participatory groundwater management in Jordan: Development and analysis of options

NASA Astrophysics Data System (ADS)

Chebaane, Mohamed; El-Naser, Hazim; Fitch, Jim; Hijazi, Amal; Jabbarin, Amer

Groundwater over-exploitation has been on the rise in Jordan. Competing demands have grown in the face of perennial water shortages, a situation which has been exacerbated by drought conditions in the past decade. This paper reports findings of a project in which management options to address over-exploitation were developed for one of Jordan's principal aquifer systems, the Amman-Zarqa Basin. Options for addressing the situation were developed through a participatory approach that involved government officials and various public and private sector interest groups. Particular efforts were made to involve well irrigators, who are likely to be heavily impacted by the changes required to reduce groundwater pumping to a sustainable level. With information obtained from a rapid appraisal survey as well as from interviews with farmers, community groups, government officials, and technical experts, an extensive set of options was identified for evaluation. Based on integrated hydrogeologic, social, and economic analysis, five complementary management options were recommended for implementation. These included the establishment of an Irrigation Advisory Service, buying out farm wells, placing firm limits on well ion and irrigated crop areas, exchanging treated wastewater for groundwater, and measures to increase the efficiency of municipal and industrial water use. Various combinations and levels of these options were grouped in scenarios, representing possible implementation strategies. The scenarios were designed to assist decision makers, well owners and other stakeholders in moving gradually towards a sustainable ion regime. Social and economic aspects of each option and scenario were analyzed and presented to stakeholders, together with a of legal, institutional and environmental ramifications. Combining scientific analysis with a participatory approach in the Amman Zarqa Basin groundwater management was devised as a prototype to be used in the management of other groundwater basins in Jordan. This participatory management approach would also be useful in other parts of the world that are experiencing similar groundwater over-exploitation problems. La surexploitation des eaux souterraines prend de l'importance en Jordanie. Les demandes en concurrence ont augmenté face à des déficits permanents d'eau, situation qui a été exacerbée par la sécheresse de la dernière décennie. Cet article rend compte de l'aboutissement d'un projet dans lequel des options de gestion portant sur la surexploitation ont été développées pour l'un des principaux systèmes aquifères de Jordanie, le bassin d'Amman Zarqa. Des options pour aborder cette situation ont été développées grâce à une approche participative qui implique des fonctionnaires du gouvernement et des groupes d'intérêts variés des secteurs public et privé. Des efforts particuliers ont été faits pour impliquer les irrigants utilisant des puits, qui sont probablement ceux qui ont le plus fort impact sur les changements attendus permettant de remettre le système en équilibre. À partir des informations obtenues de campagnes rapides d'évaluation, telles que des réunions de communautés et des entrevues avec des experts techniques du gouvernement, un large jeu d'options a été identifié pour l'évaluation. Basées sur une analyse hydrogéologique, sociale et économique, cinq options complémentaires de gestion ont été recommandées pour la réalisation. Ce sont la création d'un Service Consultatif d'Irrigation, achetant les puits agricoles, fixant des limites fermes aux prélèvements des puits et aux zones irriguées, échangeant les eaux usées traitées avec des eaux souterraines, et la mise en place de mesures pour accroître l'efficacité des usages collectifs et industriels. Des combinaisons et des niveaux variés de ces options ont été regroupés en scénarios, présentant les stratégies possibles de mise en œuvre. Les scénarios ont été mis au point pour assister les décideurs, les propriétaires de puits et les autres acteurs pour atteindre progressivement un régime de prélèvement durable. Les aspects sociaux et économiques de chaque option et de chaque scénario ont été analysés et présentés aux acteurs, en même temps qu'un résumé des ramifications légales, institutionnelles et environnementales. En combinant une analyse scientifique à une approche participative du bassin d'Amman Zarqa, la gestion des eaux souterraines a été imaginée comme un prototype pouvant être utilisé pour la gestion d'autres bassins aquifères de Jordanie. Il peut également être utile à d'autres régions du monde qui sont concernées par des problèmes similaires de surexploitation des eaux souterraines. La sobreexplotación de las aguas subterráneas ha ido en aumento en Jordania, donde las demandas en competición han crecido frente a una escasez perenne de agua, situación que ha sido agravada por el estado de sequía de la última década. Este artículo presenta los hallazgos de un proyecto en el que se han desarrollado opciones de gestión para hacer frente a la sobreexplotación en uno de los principales sistemas acuíferos de Jordania: la cuenca de Ammán-Zarga. Se ha elaborado opciones para afrontar la situación mediante un enfoque participativo que incluye a personal del gobierno y a diversos grupos de interés de los sectores público y privado. En particular, se ha intentado involucrar a los regantes que se sirven de aguas subterráneas, quienes tienen más probabilidad de ser directamente afectados por los cambios requeridos para devolver el sistema a un balance equilibrado. A partir de la información obtenida en rápidas campañas de valoración, así como de encuentros con la comunidad y entrevistas con los expertos técnicos del gobierno, se ha identificado un amplio conjunto de opciones para su evaluación. Basándose en un análisis integrado de los aspectos hidrogeológicos, sociales y económicos, se ha recomendado la implementación de cinco opciones complementarias de gestión: establecimiento de un Servicio Asesor de Riego; adquisición de pozos de granjas; imposición de límites estrictos en las extracciones de pozos y superficies de riego; substitución de las aguas subterráneas con aguas residuales depuradas; y medidas para incrementar la eficiencia de los usos municipales e industriales del agua. Se ha agrupado varias combinaciones y niveles de dichas opciones en escenarios, representando estrategias posibles de implementación. Los escenarios han sido diseñados para ayudar a los gestores en la toma de decisiones, a los propietarios de pozos y a otros agentes para que se vaya consiguiendo de forma gradual un régimen de extracciones sustentable. Se ha analizado los aspectos sociales y económicos de cada opción y de cada escenario, presentándolos a los diversos agentes, además de generar un resumen de ramificaciones legales, institucionales y medioambientales. Se ha concebido la combinación de un análisis científico con un enfoque participativo en la cuenca de Ammán-Zarga como un prototipo de gestión de las aguas subterráneas que puede ser aplicado a la gestión de otras cuencas en Jordania. También sería útil en otros lugares del mundo que estén experimentando problemas similares de sobreexplotación de los recursos hídricos subterráneos.

Determining Nurse Aide Staffing Requirements to Provide Care Based on Resident Workload: A Discrete Event Simulation Model.

PubMed

Schnelle, John F; Schroyer, L Dale; Saraf, Avantika A; Simmons, Sandra F

2016-11-01

Nursing aides provide most of the labor-intensive activities of daily living (ADL) care to nursing home (NH) residents. Currently, most NHs do not determine nurse aide staffing requirements based on the time to provide ADL care for their unique resident population. The lack of an objective method to determine nurse aide staffing requirements suggests that many NHs could be understaffed in their capacity to provide consistent ADL care to all residents in need. Discrete event simulation (DES) mathematically models key work parameters (eg, time to provide an episode of care and available staff) to predict the ability of the work setting to provide care over time and offers an objective method to determine nurse aide staffing needs in NHs. This study had 2 primary objectives: (1) to describe the relationship between ADL workload and the level of nurse aide staffing reported by NHs; and, (2) to use a DES model to determine the relationship between ADL workload and nurse aide staffing necessary for consistent, timely ADL care. Minimum Data Set data related to the level of dependency on staff for ADL care for residents in over 13,500 NHs nationwide were converted into 7 workload categories that captured 98% of all residents. In addition, data related to the time to provide care for the ADLs within each workload category was used to calculate a workload score for each facility. The correlation between workload and reported nurse aide staffing levels was calculated to determine the association between staffing reported by NHs and workload. Simulations to project staffing requirements necessary to provide ADL care were then conducted for 65 different workload scenarios, which included 13 different nurse aide staffing levels (ranging from 1.6 to 4.0 total hours per resident day) and 5 different workload percentiles (ranging from the 5th to the 95th percentile). The purpose of the simulation model was to determine the staffing necessary to provide care within each workload percentile based on resident ADL care needs and compare the simulated staffing projections to the NH reported staffing levels. The percentage of scheduled care time that was omitted was estimated by the simulation model for each of the 65 workload scenarios using optimistic assumptions about staff productivity and efficiency. There was a low correlation between ADL workload and reported nurse aide staffing (Pearson = .11; P < .01), which suggests that most of the 13,500 NHs were not using ADL acuity to determine nurse aide staffing levels. Based on the DES model, the nurse aide staffing required for ADL care that would result in a rate of care omissions below 10% ranged from 2.8 hours/resident/day for NHs with a low workload (5th percentile) to 3.6 hours/resident/day for NHs with a high workload (95th percentile). In contrast, NHs reported staffing levels that ranged from an average of 2.3 to 2.5 hours/resident/day across all 5 workload percentiles. Higher workload NHs had the largest discrepancies between reported and predicted nurse aide staffing levels. The average nurse aide staffing levels reported by NHs falls below the level of staffing predicted as necessary to provide consistent ADL care to all residents in need. DES methodology can be used to determine nurse aide staffing requirements to provide ADL care and simulate management interventions to improve care efficiency and quality. Copyright © 2016 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse

PubMed Central

Kahan, Meldon; Wilson, Lynn; Mailis-Gagnon, Angela; Srivastava, Anita

2011-01-01

Résumé Objectif Présenter aux médecins de famille un résumé clinique pratique sur la prescription d’opioïdes à des populations particulières en se fondant sur les recommandations faites dans les lignes directrices canadiennes sur l’utilisation sécuritaire et efficace des opioïdes pour la douleur chronique non cancéreuse. Qualité des données Pour produire les lignes directrices, les chercheurs ont effectué une synthèse critique de la littérature médicale en insistant plus précisément sur les études de l’efficacité et de la sécurité des opioïdes dans des populations particulières. Message principal Les médecins de famille peuvent atténuer les risques de surdose, de sédation, d’usage abusif et de dépendance grâce à des stratégies adaptées à l’âge et à l’état de santé des patients. Dans le cas de patients à risque de dépendance, on devrait réserver les opioïdes aux douleurs nociceptives ou neuropathiques bien définies qui n’ont pas répondu aux traitements de première intention. Il faut procéder lentement au titrage des opioïdes, avec des dispensations fréquentes et une étroite surveillance pour dépister tout signe d’usage abusif. Une dépendance aux opioïdes suspectée est prise en charge au moyen d’une thérapie structurée aux opioïdes, d’un traitement à la méthadone ou à la buprénorphine ou encore d’un traitement fondé sur l’abstinence. Les patients souffrant de troubles de l’humeur ou d’anxiété ont tendance à avoir une réponse analgésique atténuée aux opioïdes, sont à risque plus élevé d’usage abusif et prennent souvent des sédatifs qui interagissent défavorablement avec les opioïdes. Il faut prendre des précautions semblables à celles utilisées avec d’autres patients à risque élevé. Il faut faire un sevrage progressif si la douleur du patient demeure sévère même avec un essai adéquat de thérapie aux opioïdes. Chez les personnes âgées, la sédation, les chutes et la surdose peuvent être minimisées en utilisant des doses initiales faibles, un titrage plus lent, un sevrage des benzodiazépines et une bonne éducation des patients. Dans le cas des femmes enceintes qui prennent des opioïdes chaque jour, il faut faire un sevrage progressif et cesser complètement. Si ce n’est pas possible, il faut administrer la dose efficace la plus faible. Les femmes enceintes qui ont une dépendance aux opioïdes devraient recevoir un traitement à la méthadone. Les adolescents sont à risque élevé de surdose d’opioïdes, d’usage abusif et de dépendance. Les patients qui ont des adolescents qui vivent à la maison devraient entreposer leurs opioïdes dans un lieu sûr. Les adolescents ont rarement besoin d’une thérapie à long terme aux opioïdes. Conclusion Les médecins de famille doivent tenir compte de l’âge, de la condition psychiatrique, du degré de risque de dépendance du patient et d’autres facteurs quand ils prescrivent des opioïdes pour la douleur chronique.

Modeling microbial processes in porous media

NASA Astrophysics Data System (ADS)

Murphy, Ellyn M.; Ginn, Timothy R.

The incorporation of microbial processes into reactive transport models has generally proceeded along two separate lines of investigation: (1) transport of bacteria as inert colloids in porous media, and (2) the biodegradation of dissolved contaminants by a stationary phase of bacteria. Research over the last decade has indicated that these processes are closely linked. This linkage may occur when a change in metabolic activity alters the attachment/detachment rates of bacteria to surfaces, either promoting or retarding bacterial transport in a groundwater-contaminant plume. Changes in metabolic activity, in turn, are controlled by the time of exposure of the microbes to electron acceptors/donor and other components affecting activity. Similarly, metabolic activity can affect the reversibility of attachment, depending on the residence time of active microbes. Thus, improvements in quantitative analysis of active subsurface biota necessitate direct linkages between substrate availability, metabolic activity, growth, and attachment/detachment rates. This linkage requires both a detailed understanding of the biological processes and robust quantitative representations of these processes that can be tested experimentally. This paper presents an overview of current approaches used to represent physicochemical and biological processes in porous media, along with new conceptual approaches that link metabolic activity with partitioning of the microorganism between the aqueous and solid phases. Résumé L'introduction des processus microbiologiques dans des modèles de transport réactif a généralement suivi deux voies différentes de recherches: (1) le transport de bactéries sous forme de colloïdes inertes en milieu poreux, et (2) la biodégradation de polluants dissous par une phase stationnaire de bactéries. Les recherches conduites au cours des dix dernières années indiquent que ces processus sont intimement liés. Cette liaison peut intervenir lorsqu'un changement dans l'activité métabolique modifie les taux de fixation/libération de bactéries des surfaces, soit en facilitant, soit en retardant le transport bactérien dans le panache de polluant de l'eau souterraine. Des changements de l'activité métabolique peuvent en retour être contrôlés par le temps d'exposition des microbes à des donneurs ou à des accepteurs d'électrons et à d'autres composés affectant cette activité. De façon similaire, l'activité métabolique peut affecter la réversibilité de la fixation, en fonction du temps de séjour des microbes actifs. Ainsi, les améliorations de l'analyse quantitative des organismes souterrains nécessitent d'établir des liens directs entre les possibilités du substrat, l'activité métabolique, la croissance et les taux de fixation/libération. Cette liaison nécessite à la fois une compréhension détaillée des processus biologiques et des représentations quantitatives robustes de ces processus qui puissent être testées expérimentalement. Cet article présente une revue des approches courantes utilisées pour représenter les processus physio-chimiques et biologiques en milieu poreux, en même temps que de nouvelles approches conceptuelles qui associent l'activité métabolique à la répartition des micro-organismes entre les phases aqueuse et solide. Resumen La incorporación de los procesos microbianos en los modelos de transporte reactivos ha procedido tradicionalmente a lo largo de dos líneas de investigación independientes: (1) el transporte de bacterias como coloides inertes en el medio poroso, y (2) la biodegradación de los contaminantes disueltos por una fase estacionaria de bacterias. En los últimos años se ha comprobado que estos dos procesos están muy interrelacionados. En concreto, un cambio en la actividad metabólica puede alterar la relación de adsorción/desorción de las bacterias, favoreciendo o retardando el transporte bacteriano en un penacho de contaminación. A su vez, los cambios en la actividad metabólica están controlados, entre otros factores, por el tiempo de exposición de los microbios a los receptores/donantes de electrones. Además, la actividad metabólica puede afectar la reversibilidad de la adsorción, en función del tiempo de residencia de los microbios activos. Así, el análisis cuantitativo de la actividad subsuperficial biótica necesita de un estudio detallado de las conexiones entre disponibilidad del substrato, actividad metabólica, crecimiento y relación de adsorción/desorción, lo que requiere tanto un conocimiento de los procesos biológicos, como una representación cuantitativa robusta de dichos procesos, comprobable experimentalmente. Este artículo presenta una revisión de los métodos actuales para representar los procesos fisioquímicos y biológicos en el medio poroso, además de nuevas metodologías para relacionar la actividad metabólica con el fraccionamiento de los microorganismos entre las fases sólida y acuosa.

Caracterisation experimentale de la transmission acoustique de structures aeronautiques

NASA Astrophysics Data System (ADS)

Pointel, Vincent

Le confort des passagers à l'intérieur des avions pendant le vol est un axe en voie d'amélioration constante. L'augmentation de la proportion des matériaux composites dans la fabrication des structures aéronautiques amène de nouvelles problématiques à résoudre. Le faible amortissement de ces structures, en contre partie de leur poids/raideur faible, est non favorable sur le plan acoustique, ce qui oblige les concepteurs à devoir trouver des moyens d'amélioration. De plus, les mécanismes de transmission du son au travers d'un système double paroi de type aéronautique ne sont pas complètement compris, c'est la raison qui motive cette étude. L'objectif principal de ce projet est de constituer une base de données pour le partenaire industriel de ce projet : Bombardier Aéronautique. En effet, les données expérimentales de performance d'isolation acoustique, de systèmes complets représentatifs d'un fuselage d'avion sont très rares dans la littérature scientifique. C'est pourquoi une méthodologie expérimentale est utilisée dans ce projet. Deux conceptions différentes de fuselage sont comparées. La première possède une peau (partie extérieure du fuselage) métallique raidie, alors que la deuxième est constituée d'un panneau sandwich composite. Dans les deux cas, un panneau de finition de fabrication sandwich est utilisé. Un traitement acoustique en laine de verre est placé à l'intérieur de chacun des fuselages. Des isolateurs vibratoires sont utilisés pour connecter les deux panneaux du fuselage. La simulation en laboratoire de la couche limite turbulente, qui est la source d'excitation prépondérante pendant la phase de vol, n'est pas encore possible hormis en soufflerie. C'est pourquoi deux cas d'excitation sont considérés pour essayer d'approcher cette sollicitation : une excitation mécanique (pot vibrant) et une acoustique (champ diffus). La validation et l'analyse des résultats sont effectuées par le biais des logiciels NOVA et VAONE, utilisés par le partenaire industriel de ce projet. Un des objectifs secondaires est de valider le modèle double paroi implémenté dans NOVA. L'investigation de l'effet de compression local du traitement acoustique, sur la perte par transmission d'une simple paroi, montre que cette action n'a aucun effet bénéfique notable. D'autre part, il apparaît que la raideur des isolateurs vibratoires a un lien direct avec les performances d'isolation du système double paroi. Le système double paroi avec peau composite semble moins sensible à ce paramètre. Le modèle double paroi de NOVA donne de bons résultats concernant le système double paroi avec une peau métallique. Des écarts plus importants sont observés en moyennes et hautes fréquences dans le cas du système avec une peau composite. Cependant, la bonne tendance de la prédiction au vu de la complexité de la structure est plutôt prometteuse. Mots-clés : Expérimental, avion, double paroi, panneaux composites, perte par transmission, transmission aérienne, transmission solidienne, isolateur vibratoire.

Shall we trust WDDL?

NASA Astrophysics Data System (ADS)

Guilley, Sylvain; Chaudhuri, Sumanta; Sauvage, Laurent; Graba, Tarik; Danger, Jean-Luc; Hoogvorst, Philippe; Vong, Vinh-Nga; Nassar, Maxime; Flament, Florent

Security is not only a matter of cryptographic algorithms robustness but becomes also a question of securing their implementation. P. Kocher’s differential power analysis (DPA) is one of the many side-channel attacks that are more and more studied by the security community. Indeed, side-channel attacks (SCA) have proved to be very powerful on cryptographic algorithms such as DES and AES, customarily implemented in a wide variety of devices, ranging from smart-cards or ASICs to FPGAs. Among the proposed countermeasures, the “dual-rail with precharge logic” (DPL) aims at hiding information leaked by the circuit by making the power consumption independent of the calculation. However DPL logic could be subject to second order attacks exploiting timing difference between dual nets. In this article, we characterize by simulation, the vulnerability due to timing unbalance in the eight DES substitution boxes implemented in DPL WDDL style. The characterization results in a classification of the nodes according to their timing unbalance. Our results show that the timing unbalance is a major weakness of the WDDL logic, and that it could be used to retrieve the key using a DPA attack. This vulnerability has been experimentally observed on a full DES implementation using WDDL style for Altera Stratix EP1S25 FPGA.

Revisiting the role of durable polymers in cardiovascular devices.

PubMed

Mori, Hiroyoshi; Otsuka, Fumiyuki; Gupta, Anuj; Jinnouchi, Hiroyuki; Torii, Sho; Harari, Emanuel; Virmani, Renu; Finn, Aloke V

2017-11-01

Polymers are an essential component of drug-eluting stents (DES) used to control drug release but remain the most controversial component of DES technology. There are two types of polymers employed in DES: durable polymer based DES (DP-DES) and biodegradable polymer DES (BP-DES). First-generation DES were exclusively composed of DP and demonstrated increased rates of late stent failure due in part to poor polymer biocompatibility. Newer generations DES use more biocompatible durable polymers or biodegradable polymers. Areas covered: We will cover issues identified with 1st-generation DP-DES, areas of success and failure in 2nd-generation DP-DES and examine the promise and shortcomings of BP-DES. Briefly, fluorinated polymers used in 2nd-generation DP-DES have excellent anti-thrombogenicity and better biocompatibility than 1st-generation DES polymers. However, these devices lead to persistent drug exposure to the endothelium which impairs endothelial function and predisposes towards neoatherosclerosis. Meanwhile, BP-DES has shortened the duration of drug exposure which might be beneficial for endothelial functional recovery leading to less neoatherosclerosis. However, it remains uncertain whether the long-term biocompatibility of bare metal surfaces is better than that of polymer-coated metals. Expert commentary: Each technology has distinct advantages, which can be optimized depending upon the particular characteristics of the patient being treated.

Determination of the Dissolution Slowness Surface by Study of Etched Shapes: II. Comparison of 2D Experimental and Theoretical Etching Shapes

NASA Astrophysics Data System (ADS)

Leblois, T.; Tellier, C. R.; Messaoudi, T.

1997-03-01

The anisotropic etching behavior of quartz crystal in concentrated ammonium bifluoride solution is studied and analyzed in the framework of a tensorial model. This model allows to simulate bi- or three-dimensional etching shapes from the equation for the representative surface of the dissolution slowness. In this paper, we present experimental results such as surface profile and initially circular cross-sectional profiles of differently singly- or doubly-rotated cuts. The polar diagrams of the dissolution slowness vector in several planes are deduced from experimental data. The comparison between predicted surface and cross-sectional profiles and experimental results is detailed and shows a good agreement. In particular, several examples give evidence that the final etched shapes are correlated to the extrema of the dissolution slowness. However, in several cases, experimental shapes cannot be simply correlated to the presence of extrema. Simulation gives effectively evidence for an important role played by more progressive changes in the curvature of the slowness surface. Consequently, analysis of data merits to be treated carefully. Nous nous proposons d'étudier et d'analyser à l'aide du modèle tensoriel de la dissolution l'attaque chimique anisotrope du cristal de quartz dans une solution concentrée de bifluorure d'ammonium. Ce modèle permet de simuler des formes usinées à deux ou trois dimensions à partir de l'équation de la surface représentative de la lenteur de dissolution du cristal de quartz. Dans cet article, nous présentons des résultats expérimentaux concernant des profils de surface et des sections initialement cylindriques de coupes à simple et double rotation. Les diagrammes polaires du vecteur lenteur de dissolution dans différents plans sont déduits de données expérimentales. La comparaison entre les profils de surface et de section théoriques et les résultats expérimentaux est détaillée et montre un bon accord. En particulier plusieurs exemples montrent que la forme finale est corrélée à la présence d'extrema de la lenteur de dissolution. Cependant, la corrélation entre résultats expérimentaux et théoriques n'est pas toujours simple et mérite une analyse soignée. Pour conclure, le modèle 3D est appliqué pour prévoir la forme usinée d'un trou initialement circulaire dans une coupe tournée autour de l'axe Y. Le résultat théorique est comparé avec la forme usinée expérimentale et montre un parfait accord.

Clinical germline diagnostic exome sequencing for hereditary cancer: Findings within novel candidate genes are prevalent.

PubMed

Powis, Zöe; Espenschied, Carin R; LaDuca, Holly; Hagman, Kelly D; Paudyal, Tripti; Li, Shuwei; Inaba, Hiroto; Mauer, Ann; Nathanson, Katherine L; Knost, James; Chao, Elizabeth C; Tang, Sha

2018-08-01

Clinical diagnostic exome sequencing (DES) has been effective in diagnosing individuals with suspected genetic conditions; nevertheless little has been described regarding its clinical utility in individuals with a personal and family history of cancer. This study aimed to assess diagnostic yield and clinical characteristics of pediatric and adult patients undergoing germline DES for hereditary cancer. We retrospectively reviewed 2171 patients referred for DES; cases with a personal and/or family history of cancer were further studied. Of 39 cancer patients, relevant alterations were found in eight individuals (21%), including one (3%) positive pathogenic alteration within a characterized gene, two (5%) uncertain findings in characterized genes, and five (13%) alterations in novel candidate genes. Two of the 5 pediatric patients, undergoing testing, (40%) had findings in novel candidate genes, with the remainder being negative. We include brief case studies to illustrate the variety of challenging issues related to these patients. Our observations demonstrate utility of family-based exome sequencing in patients for suspected hereditary cancer, including familial co-segregation analysis, and comprehensive medical review. DES may be particularly useful when traditional approaches do not result in a diagnosis or in families with unique phenotypes. This work also highlights the importance and complexity of analysis of uncharacterized genes in exome sequencing for hereditary cancer. Copyright © 2018 Elsevier Inc. All rights reserved.

Etude numerique et experimentale de la reponse vibro-acoustique des structures raidies a des excitations aeriennes et solidiennes

NASA Astrophysics Data System (ADS)

Mejdi, Abderrazak

Les fuselages des avions sont generalement en aluminium ou en composite renforces par des raidisseurs longitudinaux (lisses) et transversaux (cadres). Les raidisseurs peuvent etre metalliques ou en composite. Durant leurs differentes phases de vol, les structures d'avions sont soumises a des excitations aeriennes (couche limite turbulente : TBL, champs diffus : DAF) sur la peau exterieure dont l'energie acoustique produite se transmet a l'interieur de la cabine. Les moteurs, montes sur la structure, produisent une excitation solidienne significative. Ce projet a pour objectifs de developper et de mettre en place des strategies de modelisations des fuselages d'avions soumises a des excitations aeriennes et solidiennes. Tous d'abord, une mise a jour des modeles existants de la TBL apparait dans le deuxieme chapitre afin de mieux les classer. Les proprietes de la reponse vibro-acoustique des structures planes finies et infinies sont analysees. Dans le troisieme chapitre, les hypotheses sur lesquelles sont bases les modeles existants concernant les structures metalliques orthogonalement raidies soumises a des excitations mecaniques, DAF et TBL sont reexamines en premier lieu. Ensuite, une modelisation fine et fiable de ces structures est developpee. Le modele est valide numeriquement a l'aide des methodes des elements finis (FEM) et de frontiere (BEM). Des tests de validations experimentales sont realises sur des panneaux d'avions fournis par des societes aeronautiques. Au quatrieme chapitre, une extension vers les structures composites renforcees par des raidisseurs aussi en composites et de formes complexes est etablie. Un modele analytique simple est egalement implemente et valide numeriquement. Au cinquieme chapitre, la modelisation des structures raidies periodiques en composites est beaucoup plus raffinee par la prise en compte des effets de couplage des deplacements planes et transversaux. L'effet de taille des structures finies periodiques est egalement pris en compte. Les modeles developpes ont permis de conduire plusieurs etudes parametriques sur les proprietes vibro-acoustiques des structures d'avions facilitant ainsi la tache des concepteurs. Dans le cadre de cette these, un article a ete publie dans le Journal of Sound and Vibration et trois autres soumis, respectivement aux Journal of Acoustical Society of America, International Journal of Solid Mechanics et au Journal of Sound and Vibration Mots cles : structures raidies, composites, vibro-acoustique, perte par transmission.

Situational Awareness in Aerospace Operations (La Perception de la Situation au cours des Operations Aeriennes)

DTIC Science & Technology

1990-04-01

addition to a detailed description of the Situation Awareness Global Assessment Technique (SAGAT). SAGAT was developed as an objective measure of a... developed aircraft designs and training programs hinges on en objective evaluation program that considers the global SA reqluirements of the pilot. Bsy...roll-attitudae recovery [323, and that thickened negative pitch lines (simulating lirm grad-ents) are particularly effective in improving

Hydrogen Sulfide Regulates the Cytosolic/Nuclear Partitioning of Glyceraldehyde-3-Phosphate Dehydrogenase by Enhancing its Nuclear Localization.

PubMed

Aroca, Angeles; Schneider, Markus; Scheibe, Renate; Gotor, Cecilia; Romero, Luis C

2017-06-01

Hydrogen sulfide is an important signaling molecule comparable with nitric oxide and hydrogen peroxide in plants. The underlying mechanism of its action is unknown, although it has been proposed to be S-sulfhydration. This post-translational modification converts the thiol groups of cysteines within proteins to persulfides, resulting in functional changes of the proteins. In Arabidopsis thaliana, S-sulfhydrated proteins have been identified, including the cytosolic isoforms of glyceraldehyde-3-phosphate dehydrogenase GapC1 and GapC2. In this work, we studied the regulation of sulfide on the subcellular localization of these proteins using two different approaches. We generated GapC1-green fluorescent protein (GFP) and GapC2-GFP transgenic plants in both the wild type and the des1 mutant defective in the l-cysteine desulfhydrase DES1, responsible for the generation of sulfide in the cytosol. The GFP signal was detected in the cytoplasm and the nucleus of epidermal cells, although with reduced nuclear localization in des1 compared with the wild type, and exogenous sulfide treatment resulted in similar signals in nuclei in both backgrounds. The second approach consisted of the immunoblot analysis of the GapC endogenous proteins in enriched nuclear and cytosolic protein extracts, and similar results were obtained. A significant reduction in the total amount of GapC in des1 in comparison with the wild type was determined and exogenous sulfide significantly increased the protein levels in the nuclei in both plants, with a stronger response in the wild type. Moreover, the presence of an S-sulfhydrated cysteine residue on GapC1 was demonstrated by mass spectrometry. We conclude that sulfide enhances the nuclear localization of glyceraldehyde-3-phosphate dehydrogenase. © The Author 2017. Published by Oxford University Press on behalf of Japanese Society of Plant Physiologists. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Reynolds number effect on airfoil wake structures under pitching and heaving motion

NASA Astrophysics Data System (ADS)

Kim, Kyung Chun; Karbasian, Hamidreza; ExpTENsys Team

2017-11-01

Detached Eddy Simulation (DES) and particle image velocimetry (PIV) measurements were performed to investigate the wake flow characteristics of an airfoil under pitching and heaving motion. A NACA0012 airfoil was selected for the numerical simulation and experiments were carried out in a wind tunnel and a water tunnel at Reynolds number of 15,000 and 90,000, respectively. The airfoil oscillated around an axis located 1/4 distance from the leading edge chord. Two different angles of attack, 20° and 30°, were selected with +/-10° maximum amplitude of oscillation. In order to extract the coherent flow structures from time-resolved PIV data, proper orthogonal decomposition (POD) analysis was performed on 1,000 instantaneous realisations for each condition using the method of snapshots. Vorticity contour and velocity profiles for both PIV and DES results are in good agreement for pitching and heaving motion. At high Reynolds number, 3D stream-wise vortices appeared after generating span-wise vortices. The higher maximum angle of attack allows the leading edge vortex to grow stronger and that the angle of attack appears to be more important in influencing the growth of the leading edge vortex structure than the reduced frequency. National Research Foundation of Korea (No. 2011-0030013).

Aerodynamic Analysis of a Hale Aircraft Joined-Wing Configuration

NASA Astrophysics Data System (ADS)

Sivaji, Rangarajan; Ghia, Urmila; Ghia, Karman; Thornburg, Hugh

2003-11-01

Aerodynamic analysis of a high-aspect ratio, joined wing of a High-Altitude Long Endurance (HALE) aircraft is performed. The requirement of high lift over extended flight periods for the HALE aircraft leads to high-aspect ratio wings experiencing significant deflections necessitating consideration of aeroelastic effects. The finite-volume solver COBALT, with Reynolds-averaged Navier-Stokes (RANS) and Detached Eddy Simulation (DES) capabilities, is used for the flow simulations. Calculations are performed at á = 0° and 12° for M = 0.6, at an altitude of 30,000 feet, at a Re per unit length of 5.6x106. The wing cross sections are NACA 4421 airfoils. Because of the high lift-to-drag ratio wings, an inviscid flow analysis is also performed. The inviscid surface pressure coefficient (Cp) is compared with the corresponding viscous Cp to examine the feasibility of the use of the inviscid pressure loads as an estimate of the total fluid loads on the structure. The viscous and inviscid Cp results compare reasonably only at á = 0°. The viscous flow is examined in detail via surface and field velocity vectors, vorticity, density and pressure contours. For á = 12°, the unsteady DES solutions show a weak shock at the aft-wing trailing edge. Also, the flow near the joint exhibits a region of mild separation.

Comparative bioactivation of the novel anti-tuberculosis agent PA-824 in Mycobacteria and a subcellular fraction of human liver

PubMed Central

Dogra, M; Palmer, BD; Bashiri, G; Tingle, MD; Shinde, SS; Anderson, RF; O'Toole, R; Baker, EN; Denny, WA; Helsby, NA

2011-01-01

BACKGROUND AND PURPOSE PA-824 is a 2-nitroimidazooxazine prodrug currently in Phase II clinical trial for tuberculosis therapy. It is bioactivated by a deazaflavin (F420)-dependent nitroreductase (Ddn) isolated from Mycobacterium tuberculosis to form a des-nitro metabolite. This releases toxic reactive nitrogen species which may be responsible for its anti-mycobacterial activity. There are no published reports of mammalian enzymes bioactivating this prodrug. We have investigated the metabolism of PA-824 following incubation with a subcellular fraction of human liver, in comparison with purified Ddn, M. tuberculosis and Mycobacterium smegmatis. EXPERIMENTAL APPROACH PA-824 (250 µM) was incubated with the 9000×g supernatant (S9) of human liver homogenates, purified Ddn, M. tuberculosis and M. smegmatis for metabolite identification by liquid chromatography mass spectrometry analysis. KEY RESULTS PA-824 was metabolized to seven products by Ddn and M. tuberculosis, with the major metabolite being the des-nitro product. Six of these products, but not the des-nitro metabolite, were also detected in M. smegmatis. In contrast, only four of these metabolites were observed in human liver S9; M3, a reduction product previously proposed as an intermediate in the Ddn-catalyzed des-nitrification and radiolytic reduction of PA-824; two unidentified metabolites, M1 and M4, which were products of M3; and a haem-catalyzed product of imidazole ring hydration (M2). CONCLUSIONS AND IMPLICATIONS PA-824 was metabolized by des-nitrification in Ddn and M. tuberculosis, but this does not occur in human liver S9 and M. smegmatis. Thus, PA-824 was selectively bioactivated in M. tuberculosis and there was no evidence for ‘cross-activation’ by human enzymes. PMID:20955364

The Cytochrome b5 dependent C-5(6) sterol desaturase DES5A from the endoplasmic reticulum of Tetrahymena thermophila complements ergosterol biosynthesis mutants in Saccharomyces cerevisiae

PubMed Central

Poklepovich, Tomas J.; Rinaldi, Mauro A.; Tomazic, Mariela L.; Favale, Nicolas O.; Turkewitz, Aaron P.; Nudel, Clara B.; Nusblat, Alejandro D.

2012-01-01

Tetrahymena thermophila is a free-living ciliate with no exogenous sterol requirement. However, it can perform several modifications on externally added sterols including desaturation at C5(6), C7(8), and C22(23). Sterol desaturases in Tetrahymena are microsomal enzymes that require Cyt b5, Cyt b5 reductase, oxygen, and reduced NAD(P)H for their activity, and some of the genes encoding these functions have recently been identified. The DES5A gene encodes a C-5(6) sterol desaturase, as shown by gene knockout in Tetrahymena. To confirm and extend that result, and to develop new approaches to gene characterization in Tetrahymena, we have now, expressed DES5A in Saccharomyces cerevisiae. The DES5A gene was codon optimized and expressed in a yeast mutant, erg3Δ, which is disrupted for the gene encoding the S. cerevisiae C-5(6) sterol desaturase ERG3. The complemented strain was able to accumulate 74% of the wild type level of ergosterol, and also lost the hypersensitivity to cycloheximide associated with the lack of ERG3 function. C-5(6) sterol desaturases are expected to function at the endoplasmic reticulum. Consistent with this, a GFP-tagged copy of Des5Ap was localized to the endoplasmic reticulum in both Tetrahymena and yeast. This work shows for the first time that both function and localization are conserved for a microsomal enzyme between ciliates and fungi, notwithstanding the enormous evolutionary distance between these lineages. The results suggest that heterologous expression of ciliate genes in S. cerevisiae provides a useful tool for the characterization of genes in Tetrahymena, including genes encoding membrane protein complexes. PMID:22982564

Retour vers le futur: l'expérience des patients et le lien avec la qualité, la sécurité et le rendement financier.

PubMed

Cochrane, Bonnie S; Hagins, Mitch; King, John A; Picciano, Gino; McCafferty, Maureen M; Nelson, Brian

2015-11-01

Au Canada, l'amélioration de l'expérience des patients est devenue une priorité des politiques de santé. Le perfectionnement et la normalisation des outils et systèmes pour surveiller les mesures de l'expérience des patients augmentent, tandis que la tendance vers une plus grande reddition de compte sur des améliorations durables et abordables se confirme. Pour de nombreux professionnels de la santé, ce phénomène fait foi d'un intérêt renouvelé pour les besoins et priorités fondamentaux des patients, après des décennies où les changements structurels et technologiques ont dominé les programmes de santé. Pour les leaders en santé canadiens, l'amélioration de l'expérience des patients comporte actuellement de grands défis et de belles possibilités. À cet égard, l'expérience des organisations partenaires du groupe Studer au Canada est à la fois pertinente et instructive. Ces organisations ont adopté un modèle, du nom de Evidence-Based Leadership (EBL, ou leadership fondé sur des données probantes), qui favorise et soutient l'harmonisation de l'ensemble des activités et des comportements, conformément à des objectifs organisationnels précis, y compris des améliorations mesurables de l'expérience des patients. Le présent article expose des études de cas d'organisations qui ont adopté l'EBL. Ces organisations ont réalisé des progrès rapides en matière d'indicateurs de l'expérience des patients, ainsi que dans des secteurs essentiels comme les résultats cliniques, la sécurité et le rendement financier. Les données émergentes sur les facteurs et processus qui sous-tendent ces améliorations sont également abordées. © 2015 Collège canadien des leaders en santé

Forme pseudotumorale de la tuberculose : à propos d’un cas

PubMed Central

Salama, Tarik; Aghoutane, El Mohtadi; Fezzazi, Redouane El

2017-01-01

La tuberculose osseuse peut prendre l'aspect d'une tumeur maligne. Nous présentons le cas d'un enfant de 4 ans porteur d'une tuberculose osseuse ayant simulé un ostéosarcome fémoral. Le diagnostic a été redressé par l'étude anatomopathologique. Ce cas souligne l'importance de connaitre les des différents aspects cliniques et radiologiques de la tuberculose osseuse qui peut simuler une tumeur maligne. Afin d'éviter tout retard diagnostic, chirurgiens pédiatres et radiologues doivent savoir que la tuberculose peut revêtir les tableaux cliniques et radiologiques de nombreuses pathologies. PMID:28533858

Haptische Modellierung und Deformation einer Kugelzelle

NASA Astrophysics Data System (ADS)

Schippritt, Darius; Wiemann, Martin; Lipinski, Hans-Gerd

Haptische Simulationsmodelle dienen in der Medizin in erster Linie dem Training operativer Eingriffe. Sie basieren zumeist auf physikalischen Gewebemodellen, welche eine sehr genaue Simulation der biomechanischen Eigenschaften des betreffenden Gewebes erlauben, aber gleichzeitig sehr rechenintensiv und damit zeitaufwändig in der Ausführung sind. Die menschliche Wahrnehmung kann allerdings auch eine ungenaue haptische Modellierung psychooptisch ausgleichen. Daher kann es sinnvoll sein, haptische Simulationen auch mit nicht vollständig physikalisch definierten Deformationsmodellen durchzuführen. Am Beispiel der haptischer Simulation einer in-vitro Fertilisation wird gezeigt, dass durch die Anwendung eines geometrischen Deformationsmodells eine künstliche Befruchtung unter realistischen experimentellen Bedingungen in Echtzeit haptisch simuliert und damit trainiert werden kann.

Formation et évolution des Galaxies : le rôle de leur environnement

NASA Astrophysics Data System (ADS)

Boselli, Alessandro

2016-08-01

The new panoramic detectors on large telescopes as well as the most performing space missions allowed us to complete large surveys of the Universe at different wavelengths and thus study the relationships between the different galaxy components at various epochs. At the same time, the increasing computing power allowed us to simulate the evolution of galaxies since their formation at an angular resolution never reached so far. In this article I will briefly describe how the comparison between the most recent observations and the predictions of models and simulations changed our view on the process of galaxy formation and evolution.

Aquifers and hyporheic zones: Towards an ecological understanding of groundwater

NASA Astrophysics Data System (ADS)

Hancock, Peter J.; Boulton, Andrew J.; Humphreys, William F.

2005-03-01

Ecological constraints in subsurface environments relate directly to groundwater flow, hydraulic conductivity, interstitial biogeochemistry, pore size, and hydrological linkages to adjacent aquifers and surface ecosystems. Groundwater ecology has evolved from a science describing the unique subterranean biota to its current form emphasising multidisciplinary studies that integrate hydrogeology and ecology. This multidisciplinary approach seeks to elucidate the function of groundwater ecosystems and their roles in maintaining subterranean and surface water quality. In aquifer-surface water ecotones, geochemical gradients and microbial biofilms mediate transformations of water chemistry. Subsurface fauna (stygofauna) graze biofilms, alter interstitial pore size through their movement, and physically transport material through the groundwater environment. Further, changes in their populations provide signals of declining water quality. Better integrating groundwater ecology, biogeochemistry, and hydrogeology will significantly advance our understanding of subterranean ecosystems, especially in terms of bioremediation of contaminated groundwaters, maintenance or improvement of surface water quality in groundwater-dependent ecosystems, and improved protection of groundwater habitats during the extraction of natural resources. Overall, this will lead to a better understanding of the implications of groundwater hydrology and aquifer geology to distributions of subsurface fauna and microbiota, ecological processes such as carbon cycling, and sustainable groundwater management. Les contraintes écologiques dans les environnements de subsurface sont en relation directe avec les écoulements des eaux souterraines, la conductivité hydraulique, la biogéochimie des milieux interstitiels, la taille des pores, et les liens hydrologiques avec les aquifères et les écosystèmes adjacents. L'écologie des eaux souterraines a évolué d'une science décrivant uniquement les biotopes souterrains à des études multidisciplinaires qui intègrent l'écologie et l'hydrogéologie. L'approche multidisciplinaire cherche à élucider le fonctionnement des écosystèmes souterrains et leur rôle consistant à maintenir la qualité des eaux souterraines et de surface. Dans les écotones des eaux de la surfaces des aquifères, les gradients géochimiques et les biofilms microbiologiques contrôlent les transformations de la qualité de l'eau. La faune de subsurface (stygofauna) construisent les biofilms, altèrent la taille des pores interstitiels à travers leur mouvement, et transportent physiquement des matériaux à travers l'environnement des eaux souterraines. Par ailleurs, les changements de leur population signalent un déclin de la qualité de l'eau. Une meilleure intégration de l'écologie des eaux souterraines, de la biogeochimie, et de l'hydrogéologie pourra faire avancer de manière efficace de notre compréhension des écosystèmes souterrains, et spécialement en terme de bioremédiation des eaux souterraines contaminées, de maintenance et d'amélioration de la qualité des eaux de surface dépendant des écosystèmes souterrains, et l'amélioration de la protection des habitats des eaux souterraines durant l'extraction des ressources naturelles. En général, cela conduira à une meilleure compréhension de l'implication de l'hydrogéologie et de la géologie des aquifères à la distribution de la faune de subsurface et aux microbiota, aux processus écologiques tels que les cycles du carbone, et la gestion durable des eaux souterraines. Los entornos ecológicos en ambientes subsuperficiales están relacionados directamente con el flujo de agua subterránea, la conductividad hidráulica, biogeoquímica intersticial, tamaño de los poros, y vínculos hidrológicos con acuíferos adyacentes y ecosistemas superficiales. La ecología del agua subterránea ha evolucionado a partir de una ciencia que describe la biota subterránea única hasta alcanzar la forma actual que enfatiza estudios multidisciplinarios que integran hidrogeología y ecología. Este enfoque multidisciplinario busca clarificar la función de los ecosistemas de agua subterránea y sus roles en el mantenimiento de la calidad de agua superficialy subterránea. En ecotonos de agua superficial y de acuíferos, los gradientes geoquímicos y biopelículas microbiales median trans formaciones de calidad de agua. La fauna subsuperficial (estigofauna) se alimenta de biopeliculas, altera el tamaño de los poros intersticiales mediante su movimiento, y transporta físicamente material a través del ambiente de aguas subterráneas. Además, los cambios en sus poblaciones aportan señales de decadencia de calidad de agua. La mejor integración de ecología de aguas subterráneas, biogeoquímica, e hidrogeología incrementará significativamente nuestro entendimiento de ecosistemas subterráneos, especialmente en términos de bioremediación de aguas subterráneas contaminadas, mantenimiento o mejoramiento de calidad de agua superficial en ecosistemas dependientes de agua subterránea, y protección mejorada de habitats de agua subterránea durante la extracción de recursos naturales. Sobretodo, esto conducirá a un mejor entendimiento de las implicaciones de la hidrología de aguas subterráneas y geología del acuífero, de las distribuciones de fauna subsuperficial y microbiota, procesos ecológicos tal como ciclado de carbono, y gestión sostenible de aguas subterráneas.

From one marsh to another, changing swamps - Exercise of reflexivity within the water and territories system: wetland renaturation / restoration

NASA Astrophysics Data System (ADS)

Sandoz, Alain; Chauvelon, Philippe; Boutron, Olivier

2013-04-01

In relation to the"Plan National en faveur des Zones Humides", the project aims to provide food for thought, from the interdisciplinary articulation , for the development, organizational arrangements and the level of water governance. The methods that will permit to better understand how work studied ecosystems and to measure the anthropogenic and natural part of the functioning of these territories. The methods will be based on a landscape approach and facilitated by the techniques used in landscape ecology making wide use of the techniques from geomatic (GIS, digital photogrammetry, satellite remote sensing...). Additional studies from data collected in the field will also be made in particular to improve our understanding of hydrology, water quality... . The two sites selected by this proposal covers two wetlands of national and international interests. Both are located in natural regional parks (NRP): Alpilles and Camargue, the NRP of Camargue is furthermore included in the "Man and Biosphere Reserve" of the Rhone delta. The first concerns the "Vallée des marais des Baux", the second, the "Salins de Giraud". The complexity of natural and human issues make such territories privileged study sites. Located both in the west of the "Bouches du Rhône" department, these territories have very different human and physical characteristics. We develop in this presentation only the first, the "Vallée des marais des Baux". Under the initiative of several private owners, voluntary marshes restoration experiments are conducted. This area covering about 1300 hectares was originally swamp. Since the Romans, many attempts have succeeded in drying up the area but it's not until 1950-1960 that the technical development allowed to realize so - exception of small areas of relict marsh - implementing development centred on agriculture. Following to major floods in 2003, the sector is defined (Rhône river master plan) as an flood expansion area. Moreover, there is some decline of agriculture in this valley and a challenge for this activity (cereals, beef, fodder production, olive ...) against the maintenance of the drainage system (pump stations, dykes etc..). The relict marsh is privately owned, quite unaccessible and often unknown by the public and the fifty years of agricultural conversion into polders have partially helped oversight the original nature of the ancient "marais des Baux". The purpose of this work will be, through an interdisciplinary approach to propose evolution scenarios but also, and especially in the concern of governance that will protect Wetlands without forgetting the human and economic issues. These scenarios will have to be done in a sake of sustainable development in which both, actors and nature, will win. This project aims to bring new knowledge for better governance of territories and water-related uses with a view to preserve wetlands. The construction of prospective models will take into account the assumptions of future scenarios for social water resource demand. The response of ecosystems and territories with this request will determine its relevance in this environmentally acceptable approach for the maintenance, improvement or renaturation of "natural environments" and especially wetlands. This project is financed by French Environment Ministry program "Eaux et Territoires" .

Integrated digital error suppression for improved detection of circulating tumor DNA

PubMed Central

Kurtz, David M.; Chabon, Jacob J.; Scherer, Florian; Stehr, Henning; Liu, Chih Long; Bratman, Scott V.; Say, Carmen; Zhou, Li; Carter, Justin N.; West, Robert B.; Sledge, George W.; Shrager, Joseph B.; Loo, Billy W.; Neal, Joel W.; Wakelee, Heather A.; Diehn, Maximilian; Alizadeh, Ash A.

2016-01-01

High-throughput sequencing of circulating tumor DNA (ctDNA) promises to facilitate personalized cancer therapy. However, low quantities of cell-free DNA (cfDNA) in the blood and sequencing artifacts currently limit analytical sensitivity. To overcome these limitations, we introduce an approach for integrated digital error suppression (iDES). Our method combines in silico elimination of highly stereotypical background artifacts with a molecular barcoding strategy for the efficient recovery of cfDNA molecules. Individually, these two methods each improve the sensitivity of cancer personalized profiling by deep sequencing (CAPP-Seq) by ~3 fold, and synergize when combined to yield ~15-fold improvements. As a result, iDES-enhanced CAPP-Seq facilitates noninvasive variant detection across hundreds of kilobases. Applied to clinical non-small cell lung cancer (NSCLC) samples, our method enabled biopsy-free profiling of EGFR kinase domain mutations with 92% sensitivity and 96% specificity and detection of ctDNA down to 4 in 105 cfDNA molecules. We anticipate that iDES will aid the noninvasive genotyping and detection of ctDNA in research and clinical settings. PMID:27018799

Grammaire nouvelle? Questions pour des questions (New Grammar? Questions about Questions).

ERIC Educational Resources Information Center

Lamy, Andre

1987-01-01

Implications of the "new grammar" approach to teaching French are examined, including the issues of nomenclature, definition, rules and generalizations, and native language use in the second language class. Grammar itself has not changed, and the principal concern is still good usage. (MSE)

Libe: la "une" mode d'emploi. Travailler avec des titres (Libe: How to Use the Front Page. Working with Headlines).

ERIC Educational Resources Information Center

Girod, Claudine

1985-01-01

Outlines a classroom approach to studying the French national print media that focuses on the innovative style of headlines used on the front page of "Liberation," a French daily newspaper of growing current interest. (MSE)

Concept Designed and Developed for Distortion- Tolerant, High-Stability Engine Control

NASA Technical Reports Server (NTRS)

1995-01-01

Engine Control Future aircraft turbine engines, both commercial and military, must be able to successfully accommodate expected increased levels of steady-state and dynamic engine-face distortion. Advanced tactical aircraft are likely to use thrust vectoring to enhance their maneuverability. As a result, the engines will see more extreme aircraft angles-of-attack and sideslip levels than are currently encountered with present-day aircraft. Also, the mixed-compression inlets needed for the High Speed Civil Transport will likely encounter disturbances similar to those seen by tactical aircraft, in addition to planar pulse, inlet buzz, and high distortion levels at low flight speed and off-design operation. The current approach of incorporating a sufficient component design stall margin to tolerate these increased levels of distortion would significantly reduce performance. The objective of the High Stability Engine Control (HISTEC) program is to design, develop, and flight demonstrate an advanced, high-stability, integrated engine-control system that uses measurement-based, real-time estimates of distortion to enhance engine stability. The resulting distortion-tolerant control reduces the required design stall margin, with a corresponding increase in performance and decrease in fuel burn. The HISTEC concept has been designed and developed, and the software implementing the concept has successfully accommodated time-varying distortion. The NASA Lewis Research Center is currently overseeing the development and validation of the hardware and software necessary to flight test the HISTEC concept. HISTEC is a contracted effort with Pratt & Whitney of West Palm Beach, Florida. The HISTEC approach includes two major systems: A Distortion Estimation System (DES) and Stability Management Control (SMC). DES is an aircraft-mounted, high-speed processor that estimates the amount and type of distortion present and its effect on the engine. It uses high-response pressure measurements at the engine face to calculate indicators of the type and extent of distortion in real time. From these indicators, DES determines the effects of distortion on the propulsion systems and the corresponding engine match point necessary to accommodate it. DES output consists of fan and compressor pressure ratio trim commands that are passed to the SMC. In addition, DES uses maneuver information, consisting of angle-of-attack and sideslip from the flight control, to anticipate high inlet distortion conditions. The SMC, which is contained in the engine-mounted, Improved Digital Electronic Engine Control (IDEEC), includes advanced control laws to directly control the fan and compressor transient operating line (pressure ratio). These advanced control laws, with a multivariable design, have the potential for higher bandwidth and the resulting more precise control of engine match. The ability to measure and assess the distortion effects in real time coupled with a high-response controller improves engine stability at high levels of distortion. The software algorithms implementing DES have been designed, developed, and demonstrated, and integration testing of the DES and SMC software has been completed. The results show that the HISTEC system will be able to sense inlet distortion, determine the effect on engine stability, and accommodate distortion by maintaining an adequate margin for engine surge. The Pratt &Whitney Comprehensive Engine Diagnostic Unit was chosen as the DES processor. An instrumented inlet case for sensing distortion was designed and fabricated. HISTEC is scheduled for flight test on the ACTIVE F-15 aircraft at the NASA Dryden Flight Research Center in Edwards, California, in late 1996.

Preface: Materiaux 2010

NASA Astrophysics Data System (ADS)

Cheikhrouhou, Abdelwaheb

2012-02-01

The national conference 'MATERIAUX 2010', which took place in Mahdia (Tunisia), from 4-7 November 2010 was organized by The 'Tunisian Materials Research Society: Tu-MRS' in collaboration with the Materials Physics Laboratory of Sfax 'LPM', Faculty of Sciences, Sfax University and the Research Unit ' Physique, Informatique et Mathématiques ', Faculty of Sciences, Gafsa University The First National Conference on Materials 'MATERIAUX 2006' was organized in Douz (Tunisia) in December 2006. This was followed by 'MATERIAUX 2007' held in Hammamet (Tunisia) in April 2007 and the National Conference 'MATERIAUX 2009' organized jointly with the Second 'Journées Internationales de la Physique des Matériaux et Applications: JIPMA 2009' in Gafsa (Tunisia) from 20-24 December 2009. 'MATERIAUX 2010' is intended to provide an excellent opportunity for National, Maghreb and International researchers to make their own work on materials known to a wider audience and to have discussions with other participants. This conference will also be an opportunity to exchange experiences, create and consolidate cooperation between different research structures in the Maghreb countries and also the countries around the Mediterranean. This conference will equally promote research development, contribution to collaboration between universities and the socio-economical milieu. More than 300 senior researchers, Professors, PhD and Masters students attended this conference from Tunisia, Algeria, Morocco, France, Spain and Canada. Several researchers, engineers and managers from industrial firms also attended. The conference consisted of plenary talks (8), oral contributions (40) and poster presentations (250). The topics of the Conference were: Nano-materials, nano-systems, thin films, surfaces and interfaces, applications Multifunctionnal materials, magnetic materials, dielectric materials, superconducting materials, applications,... Materials for electronics, informatics and communication Ceramics, glasses, polymers Natural materials (phosphates, clay,...) Metallic materials, alloys, metallurgy,... Others (materials and environment, materials and energy, biomaterials,...) I want to thank the scientific committee, the organizing committee, the local committee and everyone who contributed to the organization of this meeting for their invaluable efforts in order to guarantee the complete success of this conference. Abdelwaheb Cheikhrouhou President of 'Tu-MRS' Chairman of the Conference 'MATERIAUX 2010' Conference photograph Committies Organizing Committee Chairman CHEIKHROUHOU Abdelwaheb (Faculté des Sciences de Sfax) Members ALAYA Sahbi (Faculté des Sciences de Gabès) BENNACEUR Raouf (Faculté des Sciences de Tunis) BEN SALEM Mohamed (Faculté des Sciences de Bizerte) CHEIKHROUHOU-KOUBAA Wissem (Faculté des Sciences de Sfax) EL JANI Belgacem (Faculté des Sciences de Monastir) EZZAOUIA Hatem (Centre de Recherches et de Technologies de l'Energie, Technopole de Borj Cédria) LAMLOUMI Jilani (Ecole Supérieure des Sciences et Techniques de Tunis) REZIG Bahri (Ecole Nationale d'Ingénieurs de Tunis) Local Committee Chairman CHEIKHROUHOU Abdelwaheb (Faculté des Sciences de Sfax) Members CHEIKHROUHOU-KOUBAA Wissem (Faculté des Sciences de Sfax) KOUBAA Mohamed (Institut Supérieur de Biotechnologie de Sfax) NJEH Anwar (Institut Préparatoire aux Etudes d'Ingénieurs de Sfax) BEN SALAH Issam (Faculté des Sciences de Sfax) TAKKALI Férid (Faculté des Sciences de Sfax) REGAIEG Yassin (Faculté des Sciences de Sfax) OTHMANI Safa (Faculté des Sciences de Sfax) MNASSRI Rafik (Faculté des Sciences de Sfax) Secretariat BEN GHOZLEN Afifa (Faculté des Sciences de Sfax) BOUGHARIOU Sana (Faculté des Sciences de Sfax) Scientific Committee M. ADDOU, Faculté des Sciences de Kénitra (Morocco) N. AMDOUNI, Faculté des Sciences de Tunis (Tunisia) M. BACCOUCHE, Faculté des Sciences d'Annaba (Algeria) H. BATIS, Faculté des Sciences de Tunis (Tunisia) A. BELAFHAL, Faculté des Sciences d'El Jadida (Morocco) M.H. BEN GHOZLEN, Faculté des Sciences de Sfax (Tunisia) R. BENNACEUR, Faculté des Sciences de Tunis (Tunisia) B. BENYOUCEF, Université Abou Bakr Belkaid, Tlemcen (Algeria) M. BEN SALEM, Faculté des Sciences de Bizerte (Tunisia) B. BESSAIES, Centre de Recherches et Technologies de l'Energie (Tunisia) H. BOUCHRIHA, Faculté des Sciences de Tunis (Tunisia) W. BOUJELBEN, Faculté des Sciences de Sfax (Tunisia) A. CHEIKHROUHOU, Faculté des Sciences de Sfax (Tunisia) W. CHEIKHROUHOU-KOUBAA, Faculté des Sciences de Sfax (Tunisia) R. CHTOUROU, Centre de Recherches et Technologies de l'Energie (Tunisia) M. DEBBABI, Ecole Nationale d'Ingénieurs de Monastir (Tunisia) A. DAKHLAOUI, Faculté des Sciences de Bizerte (Tunisia) A. DINIA, Université de Strasbourg (France) B. ELJANI, Faculté des Sciences de Monastir (Tunisia) A. ELJAZOULI, Faculté des Sciences Ben Msik, Casablanca (Morocco) Z. FAKHFAKH, Faculté des Sciences de Sfax (Tunisia) A. GASMI, Faculté des Sciences d'Annaba (Algeria) A. GHARBI, Faculté des Sciences de Tunis (Tunisia) R. GHARBI, Faculté des Sciences de Sfax (Tunisia) K. GUIDARA, Faculté des Sciences de Sfax (Tunisia) H. GUERMAZI, Institut Préparatoire aux Etudes d'Ingénieurs de Sfax (Tunisia) S. GUERMAZI, Faculté des Sciences de Sfax (Tunisia) M. HADDAD, Faculté des Sciences de Meknès (Morocco) A. HAJ AMARA, Faculté des Sciences de Bizerte (Tunisia) D. HAMANA, Faculté des Sciences de Constantine (Algeria) N. KAMOUN, Faculté des Sciences de Tunis (Tunisia) S. KADDOUR-CHARFI, Faculté des Sciences de Tunis (Tunisia) M. KADDOUR, Faculté des Sciences de Sfax (Tunisia) M. KHITOUNI, Faculté des Sciences de Sfax (Tunisia) T. MHIRI, Faculté des Sciences de Sfax (Tunisia) Y. MLIK, Institut Préparatoire aux Etudes Scientifiques et Techniques (Tunisia) N. MLIKI, Faculté des Sciences de Tunis (Tunisia) A. NJAH, Faculté des Sciences de Gafsa (Tunisia) M. OUESLATI, Faculté des Sciences de Tunis (Tunisia) K. ZELLAMA, Faculté des Sciences d'Amiens (France) Invited Speakers AMMAR-MERIAH Souad, ITODYS, Université Paris Diderot (France) BEN SALEM Mohamed, Faculté des Sciences de Bizerte, Université du 7 Novembre á Carthage (Tunisia) CHEIKHROUHOU Abdelwaheb, Faculté des Sciences de Sfax, Université de Sfax (Tunisia) DAKHLAOUI Amel, Faculté des Sciences de Bizerte, Université du 7 Novembre á Carthage (Tunisia) DJABBAR Ahmed, Université des Sciences et des Technologies de Lille (France) DURASTANTI Félix, Centre d'Etudes et Recherche en Thermique, Environnement et Systèmes (C.E.R.T.E.S.), Université Paris Est- Créteil (France) FERY-FORGUES Suzanne, Université Paul Sabatier, Toulouse (France) GIRAUD Romain, Laboratoire de Photonique et de Nanostructures, CNRS/LPN, Marcoussis (France)

Error discrimination of an operational hydrological forecasting system at a national scale

NASA Astrophysics Data System (ADS)

Jordan, F.; Brauchli, T.

2010-09-01

The use of operational hydrological forecasting systems is recommended for hydropower production as well as flood management. However, the forecast uncertainties can be important and lead to bad decisions such as false alarms and inappropriate reservoir management of hydropower plants. In order to improve the forecasting systems, it is important to discriminate the different sources of uncertainties. To achieve this task, reanalysis of past predictions can be realized and provide information about the structure of the global uncertainty. In order to discriminate between uncertainty due to the weather numerical model and uncertainty due to the rainfall-runoff model, simulations assuming perfect weather forecast must be realized. This contribution presents the spatial analysis of the weather uncertainties and their influence on the river discharge prediction of a few different river basins where an operational forecasting system exists. The forecast is based on the RS 3.0 system [1], [2], which is also running the open Internet platform www.swissrivers.ch [3]. The uncertainty related to the hydrological model is compared to the uncertainty related to the weather prediction. A comparison between numerous weather prediction models [4] at different lead times is also presented. The results highlight an important improving potential of both forecasting components: the hydrological rainfall-runoff model and the numerical weather prediction models. The hydrological processes must be accurately represented during the model calibration procedure, while weather prediction models suffer from a systematic spatial bias. REFERENCES [1] Garcia, J., Jordan, F., Dubois, J. & Boillat, J.-L. 2007. "Routing System II, Modélisation d'écoulements dans des systèmes hydrauliques", Communication LCH n° 32, Ed. Prof. A. Schleiss, Lausanne [2] Jordan, F. 2007. Modèle de prévision et de gestion des crues - optimisation des opérations des aménagements hydroélectriques à accumulation pour la réduction des débits de crue, thèse de doctorat n° 3711, Ecole Polytechnique Fédérale, Lausanne [3] Keller, R. 2009. "Le débit des rivières au peigne fin", Revue Technique Suisse, N°7/8 2009, Swiss engineering RTS, UTS SA, Lausanne, p. 11 [4] Kaufmann, P., Schubiger, F. & Binder, P. 2003. Precipitation forecasting by a mesoscale numerical weather prediction (NWP) model : eight years of experience, Hydrology and Earth System

Les effets des interfaces sur les proprietes magnetiques et de transport des multicouches nickel/iron et cobalt/silver

NASA Astrophysics Data System (ADS)

Veres, Teodor

Cette these est consacree a l'etude de l'evolution structurale des proprietes magnetiques et de transport des multicouches Ni/Fe et nanostructures a base de Co et de l'Ag. Dans une premiere partie, essentiellement bibliographique, nous introduisons quelques concepts de base relies aux proprietes magnetiques et de transport des multicouches metalliques. Ensuite, nous presentons une breve description des methodes d'analyse des resultats. La deuxieme partie est consacree a l'etude des proprietes magnetiques et de transport des multicouches ferromagnetiques/ferromagnetiques Ni/Fe. Nous montrerons qu'une interpretation coherente de ces proprietes necessite la prise en consideration des effets des interfaces. Nous nous attacherons a mettre en evidence, a evaluer et a etudier les effets de ces interfaces ainsi que leur evolution, et ce, suite a des traitements thermiques tel que le depot a temperature elevee et l'irradiation ionique. Les analyses correlees de la structure et de la magnetoresistance nous permettront d'emettre des conclusions sur l'influence des couches tampons entre l'interface et le substrat ainsi qu'entre les couches elles-memes sur le comportement magnetique des couches F/F. La troisieme partie est consacree aux systemes a Magneto-Resistance Geante (MRG) a base de Co et Ag. Nous allons etudier l'evolution de la microstructure suite a l'irradiation avec des ions Si+ ayant une energie de 1 MeV, ainsi que les effets de ces changements sur le comportement magnetique. Cette partie debutera par l'analyse des proprietes d'une multicouche hybride, intermediaire entre les multicouches et les materiaux granulaires. Nous analyserons a l'aide des mesures de diffraction, de relaxation superparamagnetique et de magnetoresistance, les evolutions structurales produites par l'irradiation ionique. Nous etablirons des modeles qui nous aideront a interpreter les resultats pour une serie des multicouches qui couvrent un large eventail de differents comportements magnetiques et ceci en fonction de l'epaisseur de la couche magnetique de Co. Nous verrons que dans ces systemes les effets de l'irradiation ionique sont fortement influences par l'energie de surface ainsi que par l'enthalpie de formation, largement positive pour le systeme Co/Ag.

Fiabilité des structures mécaniques adaptatives: effet de la panne des actionneurs ou des capteurs sur la stabilité

NASA Astrophysics Data System (ADS)

Fall, H.; Charon, W.; Kouta, R.

2002-12-01

Ces dernières décennies, des activités significatives dans le monde étaient dirigées autour du contrôle actif. Le but de ces recherches était essentiellement d'améliorer les performances, la fiabilité et la sécurité des systèmes. Notamment dans le cas des structures soumises à des vibrations aléatoires. D'importants travaux ont été consacré à l'utilisation des “matériaux intelligents” comme capteurs et actionneurs. Cette article propose l'analyse de la fiabilité des systèmes mécaniques en étudiant les pannes des actionneurs ou des capteurs. L'effet de ces pannes sur la stabilité et la performance du système y est démontré. Les méthodologies de conception y sont rappelées. Des exemples numériques sont fournis à travers le contrôle d'un panneau sous chargement dynamique pour illustrer la méthode proposée.

Numerical simulation of pressure fluctuation in 1000MW Francis turbine under small opening condition

NASA Astrophysics Data System (ADS)

Gong, R. Z.; Wang, H. G.; Yao, Y.; Shu, L. F.; Huang, Y. J.

2012-11-01

In order to study the cause of abnormal vibration in large Francis turbine under small opening condition, CFD method was adopted to analyze the flow filed and pressure fluctuation. Numerical simulation was performed on the commercial CFD code Ansys FLUENT 12, using DES method. After an effective validation of the computation result, the flow behaviour of internal flow field under small opening condition is analyzed. Pressure fluctuation in different working mode is obtained by unsteady CFD simulation, and results is compared to study its change. Radial force fluctuation is also analyzed. The result shows that the unstable flow under small opening condition leads to an increase of turbine instability in reverse pump mode, and is one possible reason of the abnormal oscillation.

Simulation of a 5MW wind turbine in an atmospheric boundary layer

NASA Astrophysics Data System (ADS)

Meister, Konrad; Lutz, Thorsten; Krämer, Ewald

2014-12-01

This article presents detached eddy simulation (DES) results of a 5MW wind turbine in an unsteady atmospheric boundary layer. The evaluation performed in this article focuses on turbine blade loads as well as on the influence of atmospheric turbulence and tower on blade loads. Therefore, the turbulence transport of the atmospheric boundary layer to the turbine position is analyzed. To determine the influence of atmospheric turbulence on wind turbines the blade load spectrum is evaluated and compared to wind turbine simulation results with uniform inflow. Moreover, the influences of different frequency regimes and the tower on the blade loads are discussed. Finally, the normal force coefficient spectrum is analyzed at three different radial positions and the influence of tower and atmospheric turbulence is shown.

Diethylstilbestrol-Induced Mouse Hypospadias: “Window of Susceptibility”

PubMed Central

Sinclair, Adriane Watkins; Cao, Mei; Baskin, Laurence; Cunha, Gerald R.

2016-01-01

Hypospadias, an abnormality affecting the penile urethra, is one of the most prevalent congenital malformations afflicting human males. The morphology of hypospadias is markedly different in humans versus mice reflecting substantial differences in penile development in humans and mice. Estrogens such as diethylstilbestrol (DES) elicit mouse penile malformations, but the types of penile abnormalities differ depending on whether DES treatment is prenatal or neonatal. To define the actual “window of susceptibility” to the adverse effects of DES, pregnant mice and their neonatal pups were injected subcutaneously with 200ng/gbw DES every other day from embryonic day 12 to 18 (DES E12-E18), postnatal day 0 to 10 (DES P0-P10), embryonic day 12 to postnatal day 10 (DES E12 to P10), postnatal day 5 to 15 (DES P5 to P15), and postnatal day 10 to 20 (DES P10 to P20). Aged-matched controls received sesame oil vehicle. After euthanasia at 10, 15, 20 and 60 days, penises were analyzed by gross morphology, histology and morphometry. Penises of all 5 groups of DES-treated mice were reduced in size, which was confirmed by morphometric analysis of internal penile structures. The most profound effects were seen in the DES E12-P10, DES P0-P10, and DES P5-P15 groups, thus defining a DES “programming window”. For all parameters, DES treatment from P10-P20 showed the most mild of effects. Adverse effects of DES on the MUMP cartilage and erectile bodies observed shortly after the last DES injection reverted to normality in the DES P5-P15, but not in the E12-P10 and P0-P10 groups, in which MUMP cartilage and erectile body malformations persisted into adulthood, again emphasizing a “window of susceptibility” in the early neonatal period. PMID:26810244

Human Factors Implications and Issues in Network Enabled Operations

DTIC Science & Technology

2006-08-28

même par des soldats individuels. L’armée de mer, quant à elle, évolue dans un environnement de complexité moyenne comparativement aux forces...approach found in most of the derivatives of NCW because the FORCEnet paper states that in the design of this new approach to warfare and other...defects mentality, risk aversion, poorly designed war fighting experiments, and widespread contentment with current performance, expectations for NCW will

La manucure et la pédicure dans la ville de Ouagadougou (Burkina Faso): pratiques et risqué

PubMed Central

Korsaga-Somé, Nina; Andonaba, Jean Baptiste; Ouédraogo, Muriel Sidnoma; Tapsoba, Gilbert Patrice; Ilboudo, Léopold; Savadogo, Cérina; Barro-Traoré, Fatou; Niamba, Pascal; Traoré, Adama

2016-01-01

La manucure-pédicure est l'ensemble des soins esthétiques des mains, des pieds et des ongles. Au Burkina Faso, l'usage des produits de manucure-pédicure, les techniques utilisées ainsi que les risques encourus restent méconnus. L'objectif de notre étude était d’évaluer la pratique de la manucure-pédicure dans la ville de Ouagadougou. Nous avons mené une étude transversale descriptive de décembre 2010 à novembre 2012 incluant tout les praticiens ayant au moins six mois d'expérience dans l'activité et les clients présents sur les lieux au moment de l'enquête. Nous avons interrogé au total 313 praticiens et 313 clients. L’âge moyen des praticiens était de 19 ans et celui des clients de 32,2 ans. Les praticiens fixes étaient en majorité des femmes (96,87%), ceux mobiles surtout des hommes (68,37%), et 64,53% des clients étaient des femmes. Le pourcentage de praticiens n'ayant pas reçu de formation professionnelle était de 93,92%. 29,7% des praticiens faisaient tremper les instruments pendant au moins dix minutes dans de l'eau de javel; 75,71% savaient que l'utilisation de certains outils étaient dangereux et 26,51% étaient avaient présenté des effets secondaires. Parmi les clients, 40,25% savaient que le matériel utilisé comportait des risques et 30,35% avaient été victimes d'accidents. Les soins de manucure et de pédicure se font dans les salons de coiffure par des coiffeuses non formées à l'exercice de la profession La provenance et la composition des produits n'est pas connues. Des produits non recommandés sont utilisés (shampooing pour trempage des pieds, lame de rasoir et ciseaux pour raclage des pieds). Le recours à la manucure et/ou pédicure est parfois nécessaire mais cela ne doit pas faire perdre de vue les risques encourus. Une sensibilisation des clients et une formation des praticiens semblent nécessaires pour minimiser les risques. PMID:27642448

La prise en charge des troubles de santé mentale par les omnipraticiens du Québec

PubMed Central

Fleury, Marie-Josée; Farand, Lambert; Aubé, Denise; Imboua, Armelle

2012-01-01

Résumé Objectif Cette recherche vise à documenter la prise en charge des troubles mentaux (TM) par les omnipraticiens. Type d’étude Il s’agit d’une étude mixte intégrant un questionnaire auto-administré et des entrevues qualitatives. La banque de données administratives des actes médicaux de la Régie de l’assurance maladie du Québec a aussi été analysée. Contexte La province de Québec. Participants Un total de 1415 omnipraticiens de différents lieux de pratiques ont été sollicités pour le questionnaire; 970 ont été rejoints. Un sous-groupe de 60 omnipraticiens a été rejoint pour les entrevues. Principaux paramètres à l'étude La prévalence annuelle des consultations reliées à des TM courants (TMC) ou graves (TMG), les pratiques cliniques, les pratiques de collaboration, les facteurs facilitant ou entravant la prise en charge des TM, ainsi que les recommandations pour l’amélioration du système de soins. Résultats Le taux de réponse a été de 41% (n = 398 omnipraticiens) pour le questionnaire et de 63% (n = 60) pour les entrevues. Environ 25 % des visites chez les omnipraticiens sont associées à des TM. Presque tous les omnipraticiens prennent en charge des TMC et se sentent compétents pour le faire, à l’inverse de la situation retrouvée pour les TMG. Près de 20 % des TMC sont référés (principalement à des intervenants psychosociaux), alors que près de 75 % des TMG sont référés (surtout en psychiatrie et à l’urgence). Plus de 50 % des omnipraticiens affirment n’entretenir aucun contact avec l’une ou l’autre des ressources de santé mentale. Plusieurs facteurs influencent la prise en charge des TM: les profils des patients (complexité des TM, troubles concomitants); les caractéristiques des omnipraticiens (réseau informel, formation); la culture professionnelle (travail en silo, mécanismes cliniques formalisés); le milieu institutionnel (multidisciplinarité, salariat); l’organisation des services (ressources; coordination formalisée) et l’environnement (politiques). Conclusion Le rôle clé des omnipraticiens et leur soutien à la prise en charge des TM ont été démontrés, spécifiquement pour les TMC. Pour une prise en charge optimale des soins primaires de santé mentale, des stratégies à composantes multiples, dont les soins partagés, devraient être davantage déployées.

Effets de la formation sur la violence conjugale

PubMed Central

Zaher, Eman; Keogh, Kelly; Ratnapalan, Savithiri

2014-01-01

Résumé Objectif Décrire et évaluer l’efficacité de la formation concernant la violence conjugale pour améliorer les connaissances et permettre la reconnaissance et la prise en charge par les médecins des femmes victimes de violence. Sources des données On a fait une recension dans la base de données des révisions systématiques de Cochrane, MEDLINE, PubMed, PsycINFO, ERIC et EMBASE pour trouver des articles publiés entre le 1e janvier 2000 et le 1e novembre 2012. Des recherches manuelles ont complété cette recension pour cerner des articles pertinents à l’aide d’une stratégie de recherche combinant des textes, mots et expressions MeSH. Sélection des études On a choisi des études randomisées contrôlées qui portaient sur des interventions éducatives à l’intention des médecins et fournissaient des données sur les effets des interventions. Synthèse On a inclus 9 études randomisées contrôlées qui décrivaient différentes approches pédagogiques et diverses mesures des résultats. Trois études examinaient les effets d’interventions éducatives pour des médecins en formation postdoctorale et ont constaté une augmentation des connaissances, mais il n’y a eu aucun changement dans le comportement en ce qui a trait à l’identification des victimes de violence conjugale. Six études portaient sur des interventions éducatives pour des médecins en pratique active. Trois d’entre elles utilisaient une approche à multiples facettes pour les médecins, qui combinait une formation ainsi que des interventions de soutien de la part du système pour changer les comportements des médecins, comme une sensibilisation générale accrue à la violence conjugale au moyen de brochures et d’affiches, des aide-mémoire pour rappeler aux médecins comment identifier les victimes, des moyens pour faciliter l’accès des médecins à des services de soutien pour les victimes, la réalisation d’audits et la fourniture de rétroaction. Les interventions éducatives à multiples facettes prenaient la forme d’ateliers interactifs, d’apprentissage sur le web et de formation expérientielle. Une autre étude utilisait des discussions de groupes témoins et de la formation et a permis de constater une amélioration dans le signalement de la violence conjugale par les médecins. Les 2 autres études ont relevé une meilleure perception par les médecins en pratique de leur confiance en eux à l’aide d’apprentissage par problèmes en ligne. Conclusion Il a été difficile de déterminer quelle stratégie pédagogique était la plus efficace étant donné que les interventions éducatives et les mesures des résultats variaient entre les études choisies. De brèves interventions pour les médecins en formation postdoctorale amélioraient les connaissances mais ne semblaient pas influencer les comportements. La formation en ligne sous forme d’apprentissage par problèmes améliorait les perceptions des médecins en pratique, leurs connaissances et leurs habiletés quant à la prise en charge de la violence conjugale. La formation des médecins combinée à des interventions de soutien de la part du système semblait bénéfique aux victimes de violence conjugale et augmentait le nombre de demandes de consultations auprès des ressources de soutien à leur intention.

Introduction à une théorie des systèmes composites : exemples simples de matériaux lamellaires

NASA Astrophysics Data System (ADS)

Akjouj, A.; Sylla, B.; Dobrzynski, L.

This review paper is mostly an introduction to the linear response theory for composite systems. The composite materials are defined here as being formed by different homogeneous parts connected together by interfaces. This type of material can be constructed with the help of homogeneous "bricks" cuted out from infinite materials. This cutting procedures are realized with the help of cleavage operators. The "bricks" are then put together by a coupling operator. This construction manner enables to obtain for any composite system a general equation relating the composite response function (called also Green's function) to the elements of the infinite material response functions and to the cleavage and coupling operators. A general and unified formulation valid as well in matrix algebra as in the algebra of differential equations results from this approach. Any general theory is abstract ; simple examples help very much to understand it. The principal aim of this review paper is the introduction of a general theory for composite systems through simple and analytical examples from the fields of phonons, magnons and electrons in the lamellar composite materials. In order to achieve this goal, the algebra of the examples is as explicit as possible. The references of what was already realized in theory of composite response are discussed also. A prospective and non exhaustive study of all the fields where such a theory can prove to be helpful is given also in this review paper. Cet article de revue est essentiellement une introduction à la théorie de la réponse linéaire dans les systèmes composites. Les matériaux composites sont définis ici comme étant formés de parties homogènes différentes reliées par des interfaces. Ce type de matériaux peut être construit à partir de "briques" homogènes découpées dans des matériaux infinis. Ces opérations de découpage sont effectuées par l'intermédiaire d'opérateurs de clivage. Les "briques" sont ensuite assemblées grâce à un opérateur de couplage. Cette façon de construire un système composite permet d'obtenir une équation générale reliant la fonction réponse (appelée aussi fonction de Green) du système composite aux éléments des fonctions réponses des matériaux infinis et aux opérateurs de clivage et de couplage. Une formulation générale unifiée valable aussi bien en algèbre des matrices pour les systèmes discrets qu'en algèbre différentielle pour les systèmes continus en résulte. Toute théorie générale est abstraite ; sa compréhension est grandement facilitée par la pratique d'exemples simples. Le but principal de cet article de revue est d'introduire une théorie générale des systèmes composites grâce à des exemples simples et analytiques empruntés au domaine des phonons, des magnons et des électrons dans les matériaux composites lamellaires (multicouches). Afin d'atteindre ce but, les développements mathématiques des exemples sont donnés le plus explicitement possible. Une revue bibliographique de ce qui a été déjà réalisé en théorie de la réponse dans les matériaux composites est donnée également. Une étude prospective et non exhaustive des très nombreux domaines où cette théorie peut être utile prolonge la revue bibliographique.

Rapprocher nos eleves des textes litteraires (Bringing Our Students Closer to Literature).

ERIC Educational Resources Information Center

Diaz, Carmen Guillen

1987-01-01

One approach to foreign language literature appreciation focuses on demystifying literature and encouraging and maintaining active student motivation and interest in the creative process. The literature lesson is divided and presented in four parts: directed observation; active analysis by discussion groups; re-creation of characters; and creative…

A General Approach to Nonrigid Registration: Decoupled Optimization

DTIC Science & Technology

2001-10-25

Juan Ruiz-Alzola Dep. Señales y Comunicaciones . Universidad de Las Palmas de Gran Canaria, SPAIN Dep. Teorı́a de la Señal,Universidad de...s) and Address(es) Dep. Senales y Communicaciones Universidad de Las Palma de Gran Canaria, Spain Performing Organization Report Number Sponsoring

Technique distribuee de gestion de la charge sur le reseau electrique et ring-tree: Un nouveau systeme de communication P2P

NASA Astrophysics Data System (ADS)

Ayoub, Simon

Le reseau de distribution et de transport de l'electricite se modernise dans plusieurs pays dont le Canada. La nouvelle generation de ce reseau que l'on appelle smart grid, permet entre autre l'automatisation de la production, de la distribution et de la gestion de la charge chez les clients. D'un autre cote, des appareils domestiques intelligents munis d'une interface de communication pour des applications du smart grid commencent a apparaitre sur le marche. Ces appareils intelligents pourraient creer une communaute virtuelle pour optimiser leurs consommations d'une facon distribuee. La gestion distribuee de ces charges intelligentes necessite la communication entre un grand nombre d'equipements electriques. Ceci represente un defi important a relever surtout si on ne veut pas augmenter le cout de l'infrastructure et de la maintenance. Lors de cette these deux systemes distincts ont ete concus : un systeme de communication peer-to-peer, appele Ring-Tree, permettant la communication entre un nombre important de noeuds (jusqu'a de l'ordre de grandeur du million) tel que des appareils electriques communicants et une technique distribuee de gestion de la charge sur le reseau electrique. Le systeme de communication Ring-Tree inclut une nouvelle topologie reseau qui n'a jamais ete definie ou exploitee auparavant. Il inclut egalement des algorithmes pour la creation, l'exploitation et la maintenance de ce reseau. Il est suffisamment simple pour etre mis en oeuvre sur des controleurs associes aux dispositifs tels que des chauffe-eaux, chauffage a accumulation, bornes de recharges electriques, etc. Il n'utilise pas un serveur centralise (ou tres peu, seulement lorsqu'un noeud veut rejoindre le reseau). Il offre une solution distribuee qui peut etre mise en oeuvre sans deploiement d'une infrastructure autre que les controleurs sur les dispositifs vises. Finalement, un temps de reponse de quelques secondes pour atteindre 1'ensemble du reseau peut etre obtenu, ce qui est suffisant pour les besoins des applications visees. Les protocoles de communication s'appuient sur un protocole de transport qui peut etre un de ceux utilises sur l'Internet comme TCP ou UDP. Pour valider le fonctionnement de de la technique de controle distribuee et le systeme de communiction Ring-Tree, un simulateur a ete developpe; un modele de chauffe-eau, comme exemple de charge, a ete integre au simulateur. La simulation d'une communaute de chauffe-eaux intelligents a montre que la technique de gestion de la charge combinee avec du stockage d'energie sous forme thermique permet d'obtenir, sans affecter le confort de l'utilisateur, des profils de consommation varies dont un profil de consommation uniforme qui represente un facteur de charge de 100%. Mots-cles : Algorithme Distribue, Demand Response, Gestion de la Charge Electrique, M2M (Machine-to-Machine), P2P (Peer-to-Peer), Reseau Electrique Intelligent, Ring-Tree, Smart Grid

Modelisation de l'erosion et des sources de pollution dans le bassin versant Iroquois/Blanchette dans un contexte de changements climatiques

NASA Astrophysics Data System (ADS)

Coulibaly, Issa

Principale source d'approvisionnement en eau potable de la municipalite d'Edmundston, le bassin versant Iroquois/Blanchette est un enjeu capital pour cette derniere, d'ou les efforts constants deployes pour assurer la preservation de la qualite de son eau. A cet effet, plusieurs etudes y ont ete menees. Les plus recentes ont identifie des menaces de pollution de diverses origines dont celles associees aux changements climatiques (e.g. Maaref 2012). Au regard des impacts des modifications climatiques annonces a l'echelle du Nouveau-Brunswick, le bassin versant Iroquois/Blanchette pourrait etre fortement affecte, et cela de diverses facons. Plusieurs scenarios d'impacts sont envisageables, notamment les risques d'inondation, d'erosion et de pollution a travers une augmentation des precipitations et du ruissellement. Face a toutes ces menaces eventuelles, l'objectif de cette etude est d'evaluer les impacts potentiels des changements climatiques sur les risques d'erosion et de pollution a l'echelle du bassin versant Iroquois/Blanchette. Pour ce faire, la version canadienne de l'equation universelle revisee des pertes en sol RUSLE-CAN et le modele hydrologique SWAT ( Soil and Water Assessment Tool) ont ete utilises pour modeliser les risques d'erosion et de pollution au niveau dans la zone d'etude. Les donnees utilisees pour realiser ce travail proviennent de sources diverses et variees (teledetections, pedologiques, topographiques, meteorologiques, etc.). Les simulations ont ete realisees en deux etapes distinctes, d'abord dans les conditions actuelles ou l'annee 2013 a ete choisie comme annee de reference, ensuite en 2025 et 2050. Les resultats obtenus montrent une tendance a la hausse de la production de sediments dans les prochaines annees. La production maximale annuelle augmente de 8,34 % et 8,08 % respectivement en 2025 et 2050 selon notre scenario le plus optimiste, et de 29,99 % en 2025 et 29,72 % en 2050 selon le scenario le plus pessimiste par rapport a celle de 2013. Pour ce qui est de la pollution, les concentrations observees (sediment, nitrate et phosphore) connaissent une evolution avec les changements climatiques. La valeur maximale de la concentration en sediments connait une baisse en 2025 et 2050 par rapport a 2013, de 11,20 mg/l en 2013, elle passe a 9,03 mg/l en 2025 puis a 6,25 en 2050. On s'attend egalement a une baisse de la valeur maximale de la concentration en nitrate au fil des annees, plus accentuee en 2025. De 4,12 mg/l en 2013, elle passe a 1,85 mg/l en 2025 puis a 2,90 en 2050. La concentration en phosphore par contre connait une augmentation dans les annees a venir par rapport a celle de 2013, elle passe de 0,056 mg/l en 2013 a 0,234 mg/l en 2025 puis a 0,144 en 2050.

A Python tool to set up relative free energy calculations in GROMACS.

PubMed

Klimovich, Pavel V; Mobley, David L

2015-11-01

Free energy calculations based on molecular dynamics (MD) simulations have seen a tremendous growth in the last decade. However, it is still difficult and tedious to set them up in an automated manner, as the majority of the present-day MD simulation packages lack that functionality. Relative free energy calculations are a particular challenge for several reasons, including the problem of finding a common substructure and mapping the transformation to be applied. Here we present a tool, alchemical-setup.py, that automatically generates all the input files needed to perform relative solvation and binding free energy calculations with the MD package GROMACS. When combined with Lead Optimization Mapper (LOMAP; Liu et al. in J Comput Aided Mol Des 27(9):755-770, 2013), recently developed in our group, alchemical-setup.py allows fully automated setup of relative free energy calculations in GROMACS. Taking a graph of the planned calculations and a mapping, both computed by LOMAP, our tool generates the topology and coordinate files needed to perform relative free energy calculations for a given set of molecules, and provides a set of simulation input parameters. The tool was validated by performing relative hydration free energy calculations for a handful of molecules from the SAMPL4 challenge (Mobley et al. in J Comput Aided Mol Des 28(4):135-150, 2014). Good agreement with previously published results and the straightforward way in which free energy calculations can be conducted make alchemical-setup.py a promising tool for automated setup of relative solvation and binding free energy calculations.

La prévention de l’étouffement et de la suffocation chez les enfants

PubMed Central

Cyr, Claude

2012-01-01

RÉSUMÉ L’étouffement, la suffocation et la strangulation sont responsables de graves blessures non intentionnelles chez les enfants et constituent des causes importantes de décès non intentionnels chez les nourrissons et les tout-petits. Presque la totalité des décès et des blessures attribuables à un étouffement, une suffocation ou une strangulation sont évitables. Le présent document de principes traite des définitions, de l’épidémiologie et des stratégies de prévention efficaces de ces blessures. Des recommandations qui combinent des démarches pour améliorer la sécurité, incluant des recherches, de la surveillance, des lois et des normes, la conception des produits et l’éducation, sont présentées. Les dispensateurs de soins pédiatriques devraient encourager les parents et autres personnes qui s’occupent d’enfants à apprendre la réanimation cardiorespiratoire (RCR) et les premiers soins en cas d’étouffement, et leur offrir des conseils préventifs adaptés à l’âge de leur enfant lors des bilans de santé réguliers afin de prévenir ces blessures.

Measuring Effects and Success in Influence Operations: Challenges, Limitations and Opportunitites

DTIC Science & Technology

2011-04-01

domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de...documents issus des domaines de la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des...la psychologie , de l’anthropologie et de la sociologie, ainsi que sur des entrevues menées auprès de pionniers des technologies de l’intelligence

Rewrite Systems, Pattern Matching, and Code Generation

DTIC Science & Technology

1988-06-09

Transformations Quicn a bucn arbol se anima, buena sombra le cobija1 [Old Spanish Saying] 1 Trees arc hierarchical mathematical objects. Their...subtrees of a tree may m atch one or more rewrite rules. Traditional research in term rewrite systems is concerned with de termining if a given system...be simulated by sets of rewrite rules. Non-local condjtions are des cribed in an awkward way since the only way to transmit information is indirectly

Low Earth Orbit Rendezvous Strategy for Lunar Missions

NASA Technical Reports Server (NTRS)

Cates, Grant R.; Cirillo, William M.; Stromgren, Chel

2006-01-01

On January 14, 2004 President George W. Bush announced a new Vision for Space Exploration calling for NASA to return humans to the moon. In 2005 NASA decided to use a Low Earth Orbit (LEO) rendezvous strategy for the lunar missions. A Discrete Event Simulation (DES) based model of this strategy was constructed. Results of the model were then used for subsequent analysis to explore the ramifications of the LEO rendezvous strategy.

Implementation Cryptography Data Encryption Standard (DES) and Triple Data Encryption Standard (3DES) Method in Communication System Based Near Field Communication (NFC)

NASA Astrophysics Data System (ADS)

Ratnadewi; Pramono Adhie, Roy; Hutama, Yonatan; Saleh Ahmar, A.; Setiawan, M. I.

2018-01-01

Cryptography is a method used to create secure communication by manipulating sent messages during the communication occurred so only intended party that can know the content of that messages. Some of the most commonly used cryptography methods to protect sent messages, especially in the form of text, are DES and 3DES cryptography method. This research will explain the DES and 3DES cryptography method and its use for stored data security in smart cards that working in the NFC-based communication system. Several things that will be explained in this research is the ways of working of DES and 3DES cryptography method in doing the protection process of a data and software engineering through the creation of application using C++ programming language to realize and test the performance of DES and 3DES cryptography method in encrypted data writing process to smart cards and decrypted data reading process from smart cards. The execution time of the entering and the reading process data using a smart card DES cryptography method is faster than using 3DES cryptography.

Galaxy bias from the Dark Energy Survey Science Verification data: Combining galaxy density maps and weak lensing maps

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, C.; Pujol, A.; Gaztañaga, E.

We measure the redshift evolution of galaxy bias for a magnitude-limited galaxy sample by combining the galaxy density maps and weak lensing shear maps for a ~116 deg 2 area of the Dark Energy Survey (DES) Science Verification (SV) data. This method was first developed in Amara et al. and later re-examined in a companion paper with rigorous simulation tests and analytical treatment of tomographic measurements. In this work we apply this method to the DES SV data and measure the galaxy bias for a i < 22.5 galaxy sample. We find the galaxy bias and 1σ error bars inmore » four photometric redshift bins to be 1.12 ± 0.19 (z = 0.2–0.4), 0.97 ± 0.15 (z = 0.4–0.6), 1.38 ± 0.39 (z = 0.6–0.8), and 1.45 ± 0.56 (z = 0.8–1.0). These measurements are consistent at the 2σ level with measurements on the same data set using galaxy clustering and cross-correlation of galaxies with cosmic microwave background lensing, with most of the redshift bins consistent within the 1σ error bars. In addition, our method provides the only σ8 independent constraint among the three. We forward model the main observational effects using mock galaxy catalogues by including shape noise, photo-z errors, and masking effects. We show that our bias measurement from the data is consistent with that expected from simulations. With the forthcoming full DES data set, we expect this method to provide additional constraints on the galaxy bias measurement from more traditional methods. Moreover, in the process of our measurement, we build up a 3D mass map that allows further exploration of the dark matter distribution and its relation to galaxy evolution.« less

Galaxy bias from the Dark Energy Survey Science Verification data: Combining galaxy density maps and weak lensing maps

DOE PAGES

Chang, C.; Pujol, A.; Gaztañaga, E.; ...

2016-04-15

We measure the redshift evolution of galaxy bias for a magnitude-limited galaxy sample by combining the galaxy density maps and weak lensing shear maps for a ~116 deg 2 area of the Dark Energy Survey (DES) Science Verification (SV) data. This method was first developed in Amara et al. and later re-examined in a companion paper with rigorous simulation tests and analytical treatment of tomographic measurements. In this work we apply this method to the DES SV data and measure the galaxy bias for a i < 22.5 galaxy sample. We find the galaxy bias and 1σ error bars inmore » four photometric redshift bins to be 1.12 ± 0.19 (z = 0.2–0.4), 0.97 ± 0.15 (z = 0.4–0.6), 1.38 ± 0.39 (z = 0.6–0.8), and 1.45 ± 0.56 (z = 0.8–1.0). These measurements are consistent at the 2σ level with measurements on the same data set using galaxy clustering and cross-correlation of galaxies with cosmic microwave background lensing, with most of the redshift bins consistent within the 1σ error bars. In addition, our method provides the only σ8 independent constraint among the three. We forward model the main observational effects using mock galaxy catalogues by including shape noise, photo-z errors, and masking effects. We show that our bias measurement from the data is consistent with that expected from simulations. With the forthcoming full DES data set, we expect this method to provide additional constraints on the galaxy bias measurement from more traditional methods. Moreover, in the process of our measurement, we build up a 3D mass map that allows further exploration of the dark matter distribution and its relation to galaxy evolution.« less

Préoccupations de carrière chez les médecins de travail des groupements de Médecine de travail en Tunisie

PubMed Central

Merchaoui, Irtyah; Chouchène, Asma; Bouanène, Ines; Chaari, Néila; Zrafi, Wassim; Henchi, Adnène; Akrout, Mohamed; Amri, Charfeddine

2017-01-01

Introduction L'insatisfaction de carrière des médecins de travail (MT) peut influencer leur performance et la qualité des prestations fournies. L'objectif de notre étude est d'évaluer la satisfaction au travail des MT du terrain de l'ensemble des Groupements de médecine de travail (GMT) de la Tunisie et préciser les facteurs déterminants. Méthodes Il s'agit d'une étude nationale transversale portant sur les MT de 22 GMT, basée sur le questionnaire, validé SAPHORA JOB. Résultats 58% des MT des GMT étaient insatisfaits de leur carrière. La satisfaction de carrière était statistiquement influencée par le nombre d'entreprises en charge (p=0,016), l'organisation du travail (p=0,010),le ressenti du métier (p=0,011),le salaire (p‹10-3) et l'information sur la réglementation en vigueur (p=0,047). Conclusion L'homogénéisation des grilles salariales et des échelons de carrière des MT des GMT basée sur une révision des textes législatifs est indiquée. L'amélioration de l'organisation et des conditions de travail peut permettre un épanouissement au travail et une amélioration des prestations. PMID:28819472

An Overview of the Canadian Forces’ Second Generation Capability-Based Planning Analytical Process

DTIC Science & Technology

2010-09-01

gestion et intgration des capacités Feuille de route des capacits stratégiques Produits clès Plan d’investissement Plan de capacités de défense...méthodes de recherche opérationnelle objectives et subjectives permet- tant la mise en œuvre du volet « planification, gestion et intégration des ...pacités, la gestion des capacités et l’intégration des capacités. Le processus comprend des intrants, des méthodes

Paternité des articles et intérêts concurrents : une analyse des recommandations aux auteurs des journaux traitant de pratique pharmaceutique

PubMed Central

Courbon, Ève; Tanguay, Cynthia; Lebel, Denis; Bussières, Jean-François

2014-01-01

RÉSUMÉ Contexte : La présence d’auteurs honorifiques et fantômes ainsi que les intérêts concurrents représentent des difficultés bien documentées, liées à la publication d’articles scientifiques. Il existe des lignes directrices encadrant la rédaction et la publication de manuscrits scientifiques, notamment celles de l’International Committee of Medical Journal Editors (ICMJE). Objectifs : L’objectif principal de cette étude descriptive et transversale visait à recenser les instructions portant sur la paternité des articles et les intérêts concurrents provenant des recommandations aux auteurs des journaux traitant de pratique pharmaceutique. L’objectif secondaire visait à déterminer des mesures correctrices pour une paternité des articles plus transparente. Méthode : La recherche a débuté par l’identification des journaux traitant de pratique pharmaceutique. La consultation des instructions aux auteurs des journaux a permis ensuite de recenser les recommandations destinées à éviter les problèmes de paternité des articles et d’intérêts concurrents. Finalement, les membres de l’équipe de recherche se sont consultés afin de définir des mesures correctrices possibles à l’intention des chercheurs. Résultats : Des 232 journaux traitant de pharmacie, 33 ont été définis comme traitant de pratique pharmaceutique. Un total de 24 (73 %) journaux mentionnaient suivre la politique de l’ICMJE, 14 (42 %) demandaient aux auteurs de remplir un formulaire de déclaration d’intérêts concurrents au moment de la soumission de l’article, 17 (52 %) présentaient une définition de la qualité d’auteur et 5 (15 %) demandaient de détailler les contributions de chaque auteur. Une grille de 40 critères a été élaborée pour définir l’attribution du statut d’auteur. Conclusion : Moins de la moitié des journaux demandait aux auteurs de transmettre un formulaire de déclaration des intérêts concurrents au moment de la soumission d’un article et seulement la moitié des journaux avait donné une définition de la qualité d’auteur. La publication scientifique de travaux sur les pratiques pharmaceutiques n’est pas à l’abri des manques de transparence liés à la publication. L’utilisation d’une grille décrivant la contribution de chaque auteur et la publication en ligne des travaux peuvent contribuer à limiter ces risques. PMID:24970938

Mechanisms and Patterns of Intravascular Ultrasound In-Stent Restenosis Among Bare Metal Stents and First- and Second-Generation Drug-Eluting Stents.

PubMed

Goto, Kosaku; Zhao, Zhijing; Matsumura, Mitsuaki; Dohi, Tomotaka; Kobayashi, Nobuaki; Kirtane, Ajay J; Rabbani, LeRoy E; Collins, Michael B; Parikh, Manish A; Kodali, Susheel K; Leon, Martin B; Moses, Jeffrey W; Mintz, Gary S; Maehara, Akiko

2015-11-01

The most common causes of in-stent restenosis (ISR) are intimal hyperplasia and stent under expansion. The purpose of this study was to use intravascular ultrasound (IVUS) to compare the ISR mechanisms of bare metal stents (BMS), first-generation drug-eluting stents (DES), and second-generation DES. There were 298 ISR lesions including 52 BMS, 73 sirolimus-eluting stents, 52 paclitaxel-eluting stents, 16 zotarolimus-eluting stents, and 105 everolimus-eluting stent. Mean patient age was 66.6 ± 1.1 years, 74.2% were men, and 48.3% had diabetes mellitus. BMS restenosis presented later (70.0 ± 66.7 months) with more intimal hyperplasia compared with DES (BMS 58.6 ± 15.5%, first-generation DES 52.6 ± 20.9%, second-generation DES 48.2 ± 22.2%, p = 0.02). Although reference lumen areas were similar in BMS and first- and second-generation DES, restenotic DES were longer (BMS 21.8 ± 13.5 mm, first-generation DES 29.4 ± 16.1 mm, second-generation DES 32.1 ± 18.7 mm, p = 0.003), and stent areas were smaller (BMS 7.2 ± 2.4 mm(2), first-generation DES 6.1 ± 2.1 mm(2), second-generation DES 5.7 ± 2.0 mm(2), p <0.001). Stent fracture was seen only in DES (first-generation DES 7 [5.0%], second-generation DES 8 [7.4%], p = 0.13). In conclusion, restenotic first- and second-generation DES were characterized by less neointimal hyperplasia, smaller stent areas, longer stent lengths, and more stent fractures than restenotic BMS. Copyright © 2015 Elsevier Inc. All rights reserved.

The neurolinguistic approach to awake surgery reviewed.

PubMed

De Witte, Elke; Mariën, Peter

2013-02-01

Intraoperative direct electrical stimulation (DES) is increasingly used in patients operated on for tumours in critical language areas. Although a positive impact of DES on postoperative linguistic outcome is generally advocated, the literature is only scantily documented with information about the linguistic methods applied in awake surgery. This article critically reviews the neurolinguistic procedures currently used in awake studies. Based on an extensive review of the literature, an overview is given of the language mapping techniques applied in brain tumour surgery. Studies investigating linguistic testing and outcome in awake surgery were analysed. Information about the timing of the assessment(s), the linguistic tasks, the linguistic stimuli and the indication for awake surgery was also discussed. Intraoperative DES remains the 'gold standard' for language mapping, but pre- and postoperative non-invasive mapping methods are important adjuncts. In the pre- and postoperative phase, standardised linguistic test batteries are generally used to assess language function. In the intraoperative phase, only naming and number counting are commonly applied. Most often no detailed information about the linguistic stimuli is provided and no standardised protocols measuring different linguistic levels have been described. Awake surgery with DES is a useful tool for preserving linguistic functions in patients undergoing surgery in critical brain regions. However, no studies exist that apply a well-balanced and standardised linguistic protocol to reliably identify the critical language zones. The availability of a standardised linguistic protocol might substantially increase intraoperative comfort and might improve outcome and quality of life. Copyright © 2012 Elsevier B.V. All rights reserved.

ALAMEDA, a Structural–Functional Model for Faba Bean Crops: Morphological Parameterization and Verification

PubMed Central

RUIZ-RAMOS, MARGARITA; MÍNGUEZ, M. INÉS

2006-01-01

• Background Plant structural (i.e. architectural) models explicitly describe plant morphology by providing detailed descriptions of the display of leaf and stem surfaces within heterogeneous canopies and thus provide the opportunity for modelling the functioning of plant organs in their microenvironments. The outcome is a class of structural–functional crop models that combines advantages of current structural and process approaches to crop modelling. ALAMEDA is such a model. • Methods The formalism of Lindenmayer systems (L-systems) was chosen for the development of a structural model of the faba bean canopy, providing both numerical and dynamic graphical outputs. It was parameterized according to the results obtained through detailed morphological and phenological descriptions that capture the detailed geometry and topology of the crop. The analysis distinguishes between relationships of general application for all sowing dates and stem ranks and others valid only for all stems of a single crop cycle. • Results and Conclusions The results reveal that in faba bean, structural parameterization valid for the entire plant may be drawn from a single stem. ALAMEDA was formed by linking the structural model to the growth model ‘Simulation d'Allongement des Feuilles’ (SAF) with the ability to simulate approx. 3500 crop organs and components of a group of nine plants. Model performance was verified for organ length, plant height and leaf area. The L-system formalism was able to capture the complex architecture of canopy leaf area of this indeterminate crop and, with the growth relationships, generate a 3D dynamic crop simulation. Future development and improvement of the model are discussed. PMID:16390842

NATO Human Resources (Manpower) Management (Gestion des ressources humaines (effectifs) de l’OTAN)

DTIC Science & Technology

2012-02-01

performances , la gestion des récompenses et du salaire, et la motivation du personnel. En conséquence, il faut que la gestion des ressources humaines...importance au fil du temps. Les ressources humaines, chargées à l’origine de l’embauche, du licenciement, de la paie et de la gestion des ...les effets des systèmes d’évaluation des performances ;

Determination dans les Installations au Sol des Parametres Aerodynamiques de Stabilite des Aeronefs (Determination in Ground Facilities of Aerodynamic Stability Parameters of Aircraft),

DTIC Science & Technology

1979-06-01

7 INTRODUCTION ...................................................................................... 12 CHAPITRE I : ELEMENTS DE DYNAMIQUE...daone Ie texts. 12 INTRODUCTION La ddtermination des ddrivdes adrodynamiques de stabilitd, en soufflerie et au tunnel de tir, aur des maquettes...ddtection des forces eat effectuds de fegon classiqus depuis plus de vingt ana par des barreaux d’acier dquipds de jauges de contrainte, gdndralament en

Electronic Messaging for the 90s (Les Messageries Electroniques des Annees 90)

DTIC Science & Technology

1993-05-01

des autres unitds (un programme peut par exemple inclure un algorithme de 2. L CICULAIONDE ’INFRMAION recherche dans des donn~es...dit quc le rdseau, en particulier le r.dseau distant, cette coopdration homme /macbine. aifre des performances bien infirieures A celles des ordinateurs...dans ce sens, entre constructeurs d’ordinateurs, des opdrations traitementltransport. constructeurs didquipements de t~ l ~communications et exploitants de

Using the verona coding definitions of emotional sequences (VR-CoDES) and health provider responses (VR-CoDES-P) in the dental context.

PubMed

Wright, Alice; Humphris, Gerry; Wanyonyi, Kristina L; Freeman, Ruth

2012-10-01

To show if cues, concerns and provider responses (defined in VR-CoDES and VR-CoDES-P manuals) are present, can be reliably coded and require additional advice for adoption in a dental context. Thirteen patients in a dental practice setting were videoed with either their dentist or hygienist and dental nurse present in routine treatment sessions. All utterances were coded using the Verona systems: VR-CoDES and the VR-CoDES-P. Rates of cue, concerns and provider responses described and reliability tested. The VR-CoDES and VR-CoDES-P were successfully applied in the dental context. The intra-rater ICCs for the detection of cues and concerns and provider response were acceptable and above 0.75. A similar satisfactory result was found for the inter-rater reliability. The VR-CoDES and the VR-CoDES-P are applicable in the dental setting with minor supporting guidelines and show evidence of reliable coding. The VR-CoDES and the VR-CoDES-P may be helpful tools for analysing patient cues and concerns and the dental professionals' responses in the dental context. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Etude de pratiques d'enseignement relatives a la modelisation en sciences et technologies avec des enseignants du secondaire

NASA Astrophysics Data System (ADS)

Aurousseau, Emmanuelle

Les modeles sont des outils amplement utilises en sciences et technologies (S&T) afin de representer et d’expliquer un phenomene difficilement accessible, voire abstrait. La demarche de modelisation est presentee de maniere explicite dans le programme de formation de l’ecole quebecoise (PFEQ), notamment au 2eme cycle du secondaire (Quebec. Ministere de l'Education du Loisir et du Sport, 2007a). Elle fait ainsi partie des sept demarches auxquelles eleves et enseignants sont censes recourir. Cependant, de nombreuses recherches mettent en avant la difficulte des enseignants a structurer leurs pratiques d’enseignement autour des modeles et de la demarche de modelisation qui sont pourtant reconnus comme indispensables. En effet, les modeles favorisent la conciliation des champs concrets et abstraits entre lesquels le scientifique, meme en herbe, effectue des allers-retours afin de concilier le champ experimental de reference qu’il manipule et observe au champ theorique relie qu’il construit. L’objectif de cette recherche est donc de comprendre comment les modeles et la demarche de modelisation contribuent a faciliter l’articulation du concret et de l’abstrait dans l’enseignement des sciences et des technologies (S&T) au 2eme cycle du secondaire. Pour repondre a cette question, nous avons travaille avec les enseignants dans une perspective collaborative lors de groupes focalises et d’observation en classe. Ces dispositifs ont permis d’examiner les pratiques d’enseignement que quatre enseignants mettent en oeuvre en utilisant des modeles et des demarches de modelisation. L’analyse des pratiques d’enseignement et des ajustements que les enseignants envisagent dans leur pratique nous permet de degager des connaissances a la fois pour la recherche et pour la pratique des enseignants, au regard de l’utilisation des modeles et de la demarche de modelisation en S&T au secondaire.

Effets des electrons secondaires sur l'ADN

NASA Astrophysics Data System (ADS)

Boudaiffa, Badia

Les interactions des electrons de basse energie (EBE) representent un element important en sciences des radiations, particulierement, les sequences se produisant immediatement apres l'interaction de la radiation ionisante avec le milieu biologique. Il est bien connu que lorsque ces radiations deposent leur energie dans la cellule, elles produisent un grand nombre d'electrons secondaires (4 x 104/MeV), qui sont crees le long de la trace avec des energies cinetiques initiales bien inferieures a 20 eV. Cependant, il n'y a jamais eu de mesures directes demontrant l'interaction de ces electrons de tres basse energie avec l'ADN, du principalement aux difficultes experimentales imposees par la complexite du milieu biologique. Dans notre laboratoire, les dernieres annees ont ete consacrees a l'etude des phenomenes fondamentaux induits par impact des EBE sur differentes molecules simples (e.g., N2, CO, O2, H2O, NO, C2H 4, C6H6, C2H12) et quelques molecules complexes dans leur phase solide. D'autres travaux effectues recemment sur des bases de l'ADN et des oligonucleotides ont montre que les EBE produisent des bris moleculaires sur les biomolecules. Ces travaux nous ont permis d'elaborer des techniques pour mettre en evidence et comprendre les interactions fondamentales des EBE avec des molecules d'interet biologique, afin d'atteindre notre objectif majeur d'etudier l'effet direct de ces particules sur la molecule d'ADN. Les techniques de sciences des surfaces developpees et utilisees dans les etudes precitees peuvent etre etendues et combinees avec des methodes classiques de biologie pour etudier les dommages de l'ADN induits par l'impact des EBE. Nos experiences ont montre l'efficacite des electrons de 3--20 eV a induire des coupures simple et double brins dans l'ADN. Pour des energies inferieures a 15 eV, ces coupures sont induites par la localisation temporaire d'un electron sur une unite moleculaire de l'ADN, ce qui engendre la formation d'un ion negatif transitoire dans un etat electronique dissociatif, cette localisation est suivie d'une fragmentation. A plus haute energie, la dissociation dipolaire (i.e., la formation simultanee d'un ion positif et negatif) et l'ionisation jouent un role important dans le dommage de l'ADN. L'ensemble de nos resultats permet d'expliquer les mecanismes de degradation de l'ADN par les EBE et d'obtenir des sections efficaces effectives des differents types de dommages.

PubMed

Belaid, Loubna; Cloos, Patrick; Ridde, Valéry

2017-04-20

Cette étude vise à décrire la mobilisation des représentations ethnoculturelles par des agents et des gestionnaires de santé pour expliquer l'échec partiel d'une politique de santé maternelle et discuter des conséquences potentielles de ces représentations sur l'accès aux soins de santé des populations.MÉTHODES : Il s'agit d'une recherche qualitative de type socio-anthropologique mobilisant des entretiens approfondis, des discussions informelles, des observations non participantes menées dans les centres de santé et une analyse documentaire. Les entretiens ont été menés auprès de 16 agents de santé et de 10 gestionnaires. Les entretiens ont été enregistrés sous support numérique et transcrits. L'étude s'est déroulée dans le district sanitaire de Djibo au Burkina Faso.RÉSULTATS : L'identification ethnique, les coutumes relatives à l'accouchement (pudeur, discrétion, présence féminine), le statut social des femmes (le faible pouvoir décisionnel), le nomadisme et l'organisation sociale des populations et leurs résistances au changement sont érigés comme des obstacles « culturels » à la politique de santé. L'usage largement répandu de ces représentations par les agents et les gestionnaires de santé contribue à réprimander les populations et à masquer les facteurs structurels qui ont pourtant une influence plus importante sur l'utilisation des services de santé maternelle. Cette recherche met en lumière le danger de l'usage excessif des représentations ethnoculturelles teintées de culturalisme dans les pratiques et les politiques de santé publique en véhiculant des stéréotypes à l'égard de certains groupes de population. Pour comprendre le succès ou l'échec des politiques sanitaires, il demeure important de considérer la qualité du contact avec le système de santé, les facteurs structurels notamment les capacités des ménages à faire face aux dépenses des soins de santé et des distances entre les villages et les centres de santé. Ces éléments permettraient de mieux comprendre les disparités constatées à l'égard des indicateurs d'utilisation des services de santé.

Post operative infections of the spine: technique, indications and results of the surgical treatment - A retrospective study of 90 cases.

PubMed

Lazennec, J Y; Laville, C; Konel, B; Roy-Camille, R; Saillant, G; Poloujadoff, M P

1996-05-01

Post operative infection in spine surgery is a well known complication. The authors studied a series of 90 patients in accordance with an homogenous strategy based on the excision of necrotic and infected tissues, associated with appropriate antibiotics.The results are analyzed according to the degree of infection (which is based on the type of germs and their associations), and type of patients, the delay in diagnosis and the anatomical extension of the infected lesions.Making a difference between superficial and deep infection is of no therapeutic value and may lead to wrong and inadequate treatment.One must separate the common infections (which are due to germs as staphylococcus aureus or others from the urinary or digestive tract), and severe infections (which are either due to a per operative massive and deep contamination, or associated with patient's poor general condition).This series is mainly about posterior approaches to the spine, with or without osteosynthesis. Technical problems for treatment depend on the site of infection, particularly at the thoracic kyphosis level, or at the lumbar level where the muscle necrosis can be extensive. At the cervical level, the infection of an anterior approach mandates a check on the respiratory and digestive tracts.Removing the osteosynthesis is not mandatory in post operative spinal infections, as it may induce severe mechanical destabilization. An anterior approach is not necessarily required in the case of a posterior infection, except with massive contamination of an anterior graft. In some cases, posterior lumbar interbody fusion can lead to the indication for anterior cage removal.Pseudarthrosis of an infected spine, initially treated to obtain fusion, is still the worst complication. In case of previous posterior infection, even a severe one, fusion can still be obtained through a secondary anterior or posterior approach for grafting, with or without osteosynthesis.In this series, there was no neurological complication due to infection.However, eight diceases occured in weak patients with neurological involvement. This points out the importance of the general treatment associated with the surgery, and the necessity of a thorough assessment. a thorough assessment.RéSUMé: Les infections post-opératoires représentent une complication largement documentée dans le domaine de la chirurgie du rachis. Les auteurs étudient une série de 90 patients traités selon une stratégie homogène basée sur l'excision des tissus nécrosés et infectés associée à l'utilisation d'un traitement antibiotique adapté. Les résultats sont analysés en fonction du degré d'infection (basé sur le type de germe et leurs associations) de l'état des patients, du délai pour le diagnostic et de l'étendue anatomique des lésions infectieuses. L'opposition entre infection superficielle et profonde semble sans intérêt sur le plan thérapeutique et peut conduire à un traitement insuffisant ou mal adapté.Il est important de séparer les infections classiques (qui sont dûes à des germes comme le staphylocoque doré ou d'autres germes provenant de la sphère urinaire ou digestive) et les infections sévères (qui sont soit dûes à une contamination per-opératoire massive et profonde ou associées à des patients dont létat général est déficient).Cette série est principalement basée sur les abord postérieurs du rachis avec ou sans ostéosynthèse. Les problèmes techniques pour le traitement dépendent du site de l'infection: aux niveaux thoracique et lombaire, la nécrose musculaire peut être très extensive. Au niveau cervical, l'infection d'un abord antérieur impose de vérifier l'intégrité du tractus aéro-digestif.L'ablation initiale du matériel n'est pas nécessaire dans beaucoup de cas d'infections post-opératoires car elle peut induire des destabilisations sévères et des complications mécaniques supplémentaires. Un abord antérieur n'est pas forcément nécessaire en cas d'infection postérieure mises à part les contaminations massives d'une greffe antérieure ou une infection d'une cage intervertébrale réalisée pour une fusion intersomatique par voie postérieure.La pseudarthrose des greffes sur un rachis infecté qui a été traité initialement pour obtenir une fusion reste encore la plus sévère des complications. Dans les cas d'infections postérieures même sévères, la fusion peut être encore obtenue secondairement grâce à un abord antérieur ultérieur ou même un abord postérieur pour des greffes complémentaires avec ou sans ostéosynthèse.Dans cette série, les auteurs ne signalent aucune complication neurologique dûe à l'infection. Néanmoins, 8 décès sont à déplorer chez des patients fragiles avec signes neurologiques initiaux. Ceci souligne l'importance du traitement général associé à la chirurgie et la nécessité d'un bilan complet de ces malades.

"Voici des fruits, des fleurs, des feuilles et des branches" et pourquoi pas des legumes? ("Here are Fruits, Flowers, Leaves, and Branches" and Why Not Vegetables?).

ERIC Educational Resources Information Center

van Zundert, Danielle

1986-01-01

Describes an experiment in teaching language to young children through nature study. Activities are outlined, including the linguistic, cognitive, and cultural objectives for each. Brief illustrated descriptions are also given. (MSE)

US Army Morale, Welfare and Recreation (MWR) Programmes : Links to Readiness and Retention

DTIC Science & Technology

2011-01-01

la Direction des opérations, Bureau du sous-chef d’état-major pour la ... gestion des emprises et garnisons de l’US Army, Washington, DC. Il enseigne au Département de philosophie du Northern Virginia Community College...américaine à l’intention des personnels militaires et des familles, et des variables mesurant l’état de préparation des forces et la fidélisation de

Aircraft Disinsection: A Guide for Military and Civilian Air Carriers (Desinsectisation des aeronefs: Un guide a l’intention des responsables des transports aeriens civils et militaires)

DTIC Science & Technology

1996-04-01

regulations. - Ceratitis capitata (Mediterranean fruit fly). Quarantine regulations generally reduce - Rhagoletis pomonella (Apple maggot). the chances of a...d’insectes nuisibles dans un pays, en 6vitant des risques pour la sant6 des 6quipages, pour la s~curit6 de 1’a~ronef et pour l’industrie. Ce rapport examine 1...diffrrents officiels responsables de la r~glementation des insectes nuisibles introduits, de l’inscription des pesticides et de leur utilisation en

Contrôler la douleur et réduire l’usage abusif d’opioïdes

PubMed Central

Kotalik, Jaro

2012-01-01

Résumé Objectif Aider les médecins de famille à faire un juste équilibre sur le plan de l’éthique dans leurs pratiques de prescription d’opioïdes. Source des données Une recension des articles en anglais publiés entre 1985 et 2011 a été effectuée dans MEDLINE. La majorité des données probantes étaient de niveau III. Message principal Il est essentiel de suivre les guides de pratique clinique quand on prescrit des opioïdes, sauf s’il est démontré qu’une autre option est justifiée. De plus, quand on réfléchit à la pertinence de prescrire des opioïdes et aux nombreuses implications sur le plan de l’éthique, il est utile de fonder sa décision sur l’application des principes éthiques de la bienfaisance, de la non-malfaisance, du respect de l’autonomie et de la justice. En outre, il est essentiel de se tenir au fait des changements dans les lois et la règlementation, ainsi qu’à propos des registres électroniques provinciaux des ordonnances d’opioïdes. Conclusion Les médecins doivent s’assurer que la douleur de leurs patients est bien évaluée et prise en charge. Le contrôle optimal de la douleur peut exiger la prescription d’opioïdes. Cependant, l’obligation de soulager la douleur doit être exercée en juste équilibre avec l’acquittement de la responsabilité tout aussi importante de ne pas exposer les patients au risque de dépendance et de ne pas créer de possibilités de détournement de drogues, de trafic et de dépendance chez d’autres personnes. Les principes éthiques fondamentaux offrent un cadre de réflexion qui peut aider les médecins à prendre des décisions appropriées sur le plan de l’éthique au sujet de la prescription d’opioïdes.

Approche à l’endroit des blessures traumatiques à la main en soins primaires

PubMed Central

Cheung, Kevin; Hatchell, Alexandra; Thoma, Achilleas

2013-01-01

Résumé Objectif Passer en revue la prise en charge initiale des blessures traumatiques communes à la main que voient les médecins de soins primaires. Sources des données Nous avons examiné les données cliniques probantes et les ouvrages spécialisés récents cernés par des recherches dans la base de données électronique MEDLINE. Nous avons utilisé l’opinion d’experts pour compléter les recommandations dans les domaines où les données scientifiques étaient rares. Message principal Les médecins de soins primaires sont couramment appelés à prendre en charge des patients victimes de blessures traumatiques à la main. Dans le contexte d’un cas clinique, nous examinons l’évaluation, le diagnostic et la prise en charge initiale des traumatismes communs à la main. La présentation et la prise en charge des blessures au lit de l’ongle, des amputations de l’extrémité du doigt, des doigts en maillet, des fractures à la main, des lacérations de tendons, des morsures et de la ténosynovite infectieuse seront aussi discutées. Les principes de la prise en charge des blessures traumatiques à la main comportent la réduction et l’immobilisation des fractures, la prescription d’imagerie radiographique post-réduction, l’obtention d’un recouvrement par les tissus mous, la prévention et le traitement des infections et l’assurance d’une prophylaxie antitétanique. Conclusion Il est essentiel d’assurer une évaluation et une prise en charge appropriées des blessures traumatiques à la main pour prévenir une morbidité considérable à long terme dans une population autrement en santé. La reconnaissance sans délai des blessures qui nécessitent une demande de consultation urgente ou rapide auprès d’un chirurgien spécialiste de la main est également critique.

Relation entre les caractéristiques des table-bancs et les mesures anthropométriques des écoliers au Benin

PubMed Central

Falola, Stève Marjelin; Gouthon, Polycarpe; Falola, Jean-Marie; Fiogbe, Michel Armand; Nigan, Issiako Bio

2014-01-01

Introduction Le mobilier scolaire et la posture assise en classe sont souvent impliqués dans l'apparition des douleurs rachidiennes, influant de fait sur la qualité des tâches réalisées par les apprenants. Aucune étude n'a encore vérifié le degré d'adéquation entre les caractéristiques du mobilier et celles des écoliers au Bénin. L'objectif de cette étude transversale est donc de déterminer la relation entre les dimensions des table-bancs utilisées en classe et les mesures anthropométriques des écoliers au Bénin. Methods Elle a été réalisée avec un échantillon probabiliste de 678 écoliers, âgés de 4 à 17 ans. Les mesures anthropométriques des écoliers et les mensurations relatives aux longueurs, largeurs et hauteurs des table-bancs ont été mesurées, puis intégrées aux équations proposées dans la littérature. Les pourcentages des valeurs situées hors des limitesacceptables, dérivées de l'application des équations ont été calculés. Results La largeur et la hauteur des table-bancs utilisées par les écoliers étaient plus élevées (p < 0,05) que les valeurs de référence recommandées par les structures officielles de contrôle et de production des mobiliers scolaires au Bénin. Quel que soit le sexe, il y avait une inadéquation entre la largeur du banc et la longueur fesse-poplité, puis entre la hauteur de la table et la distance coude-bancdes écoliers. Conclusion Les résultats suggèrent de prendre en compte l’évolution des mesures anthropométriques des écoliers dans la confection des table-bancs, afin de promouvoir de bonnes postures assises en classe et de réduire le risque de troubles du rachis. PMID:25317232

Guide de pratique clinique pour les lésions cérébrales traumatiques légères et les symptômes persistants

PubMed Central

Marshall, Shawn; Bayley, Mark; McCullagh, Scott; Velikonja, Diana; Berrigan, Lindsay

2012-01-01

Résumé Objectif Présenter les nouvelles lignes directrices sur la prise en charge des lésions cérébrales traumatiques légères (LCTL) et les symptômes persistants post-commotion (SPPC) afin de renseigner et d’orienter les médecins qui prennent en charge des patients qui se remettent d’une LCTL. Qualité des données On a effectué une recherche des guides de pratique clinique existants portant sur les LCTL et une synthèse critique des ouvrages scientifiques évaluant le traitement des SPPC. Étant donné la rareté des conseils sur la prise en charge des SPPC dans les travaux sur les lésions cérébrales traumatiques, une deuxième recherche documentaire a été faite pour recenser les guides de pratique clinique et les synthèses critiques concernant la prise en charge de ces symptômes communs dans la population en général. On a convoqué des professionnels de la santé provenant de différentes disciplines et régions du Canada et de l’étranger à une conférence consensuelle d’experts pour examiner les lignes directrices et les données probantes existantes et élaborer un guide complet pour la prise en charge des LCTL et des SPPC. Message principal À l’aide d’un processus Delphi modifié, on a produit 71 recommandations portant sur le diagnostic et la prise en charge des LCTL et des SPPC. De plus, on a inclus dans le guide de nombreuses ressources et des outils pour faciliter la mise en œuvre des recommandations. Conclusion Un guide de pratique clinique a été élaboré pour aider les professionnels de la santé à fournir des soins fondés sur les données probantes et les pratiques exemplaires à la population complexe de personnes qui ont des SPPC à la suite d’une LCTL.

La singularité du patient tuberculeux dans le système de santé: l'expérience du Burkina Faso

PubMed Central

Zerbo, Roger

2013-01-01

La démarche pluridisciplinaire s'impose de plus en plus dans le secteur de la santé dans le contexte africain, où les parcours thérapeutiques sont pluriels et les rapports des usagers des centres de santé sont complexes et peu satisfaisants. La compréhension des représentations de la maladie est nécessaire pour offrir des soins appropriés certes, mais l'expérience individuelle des malades représente également une source de savoir. Les données ont été collectées à travers des entretiens semi-directifs, le recueil des récits de vie et des observations participantes. Cet article rend compte d'une expérience d'implication de socio-anthropologue dans la mise en œuvre d'un programme de santé publique au Burkina Faso en vue d'une amélioration de la prise en charge des malades tuberculeux. L'analyse des données à été conduite dans une visée réflexive. Les perspectives socio-anthropologiques ont révélé que l'expérience des anciens malades tuberculeux peut être mise à profit afin d'apporter des changements dans les relations thérapeutiques et l'intégration sociale des autres malades. Cette idée à été mise en application pour tenir lieu d'une traduction des analyses anthropologiques en actes pour un changement. L'article évoque la manière dont l'approche socio-anthropologique au sein d'un programme de santé, peut mettre en évidence le potentiel des malades à être des acteurs importants dans le fonctionnement des services de soins et leur propre bien-être. Dans cette situation, la démarche théorique implique la réflexivité de l'anthropologue, mais également un regard critique sur les modes d'intervention en santé publique. PMID:24009798

Influence du comportement des accompagnants sur le vécu des patients admis pour hémorragies digestives hautes au CHU campus de Lomé (Togo)

PubMed Central

Bagny, Aklesso; Dusabe, Angelique; Bouglouga, Oumboma; Lawson-ananisoh, Mawuli Late; Kaaga, Yeba Laconi; Djibril, Mohaman Awalou; Soedje, Kokou Mensah; Dassa, Simliwa Kolou; Redah, Datouda

2014-01-01

Introduction L'hémorragie digestive haute est une urgence, qui constitue souvent pour les patients un danger mortel suscitant inquiétude et agitation. Dans cet état, le patient dépend de ses accompagnants pour ses soins et pour honorer le traitement; mais souvent, il a été observé une discordance entre l'urgence et les comportements des accompagnants. Le but de cette étude était de décrire les facteurs socioéconomiques et psychologiques pouvant influencer les comportements des accompagnants des patients admis pour HDH, estimer l'indice de relation entre ces comportements et les facteurs associés d'une part et le vécu des patients admis pour HDH d'autre part. Méthodes Il s'agit d'une étude prospective menée de Septembre 2010 à Juin 2011 (soit 10 mois). Nous avions utilisé l'entretien semi-dirigé et l'observation directe pour collecter nos données, ces dernières avaient été traitées par les méthodes statistiques et d'analyse de contenu. Résultats Dans la présente étude, les comportements des accompagnants des patients admis pour HDH sont en majorité marqués par l'abandon (84%) et le manque de sollicitude (80,2%). Ces comportements sont souvent stimulés par les facteurs socioéconomiques tels que les difficultés économiques (83,2%), des conflits intrafamiliaux (85,1%) et des représentations (maladie incurable ou envoûtement) de la maladie par les accompagnants (73,3%) des cas. Quant aux patients, ils vivent ces comportements comme étant des menaces de mort ou des rejets (77,20%) et comme étant une dévalorisation ou une humiliation de la part de leurs accompagnants (70,30%). Les résultats confirment l'existence de lien significatif entre les comportements des accompagnants et les facteurs socio économiques, entre les comportements des accompagnants et des facteurs psychologiques, et entre le vécu des patients admis pour l'HDH et les comportements des accompagnants. Conclusion Des études ultérieures devraient aborder les points non touchés dans cette étude. Certes, elle a apporté un plus dans la compréhension du vécu des patients admis pour HDH et des comportements de leurs accompagnants. Cependant, elle est loin d'avoir épuisé les différents contours de la problématique de la présente étude. PMID:25848453

Caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques (LPIM) =

NASA Astrophysics Data System (ADS)

Fareh, Fouad

Le moulage par injection basse pression des poudres metalliques est une technique de fabrication qui permet de fabriquer des pieces possedant la complexite des pieces coulees mais avec les proprietes mecaniques des pieces corroyees. Cependant, l'optimisation des etapes de deliantage et de frittage a ete jusqu'a maintenant effectuee a l'aide de melange pour lesquels la moulabilite optimale n'a pas encore ete demontree. Ainsi, la comprehension des proprietes rheologiques et de la segregation des melanges est tres limitee et cela presente le point faible du processus de LPIM. L'objectif de ce projet de recherche etait de caracteriser l'influence des liants sur le comportement rheologique des melanges en mesurant la viscosite et la segregation des melanges faible viscosite utilises dans le procede LPIM. Afin d'atteindre cet objectif, des essais rheologiques et thermogravimetriques ont ete conduits sur 12 melanges. Ces melanges ont ete prepares a base de poudre d'Inconel 718 de forme spherique (chargement solide constant a 60%) et de cires, d'agents surfactants ou epaississants. Les essais rheologiques ont ete utilises entre autre pour calculer l'indice d'injectabilite ?STV des melanges, tandis que les essais thermogravimetriques ont permis d'evaluer precisement la segregation des poudres dans les melanges. Il a ete demontre que les trois (3) melanges contenant de la cire de paraffine et de l'acide stearique presentent des indices alpha STV plus eleves qui sont avantageux pour le moulage par injection des poudres metalliques (MIM), mais segregent beaucoup trop pour que la piece fabriquee produise de bonnes caracteristiques mecaniques. A l'oppose, le melange contenant de la cire de paraffine et de l'ethylene-vinyle acetate ainsi que le melange contenant seulement de la cire de carnauba segregent peu voire pas du tout, mais possedent de tres faibles indices alphaSTV : ils sont donc difficilement injectables. Le meilleur compromis semble donc etre les melanges contenant de la cire (de paraffine, d'abeille et de carnauba) et de faible teneur en acide stearique et en ethylene-vinyle acetate. Par ailleurs, les lois physiques preexistantes ont permis de confirmer les resultats des essais rheologiques et thermogravimetriques, mais aussi de mettre en evidence l'influence de la segregation sur les proprietes rheologiques des melanges. Ces essais ont aussi montre l'effet de constituants de liant et du temps passe a l'etat fondu sur l'intensite de la segregation dans les melanges. Les melanges contenants de l'acide stearique segregent rapidement. La caracterisation des melanges developpes pour le moulage basse pression des poudres metalliques doit etre obtenue a l'aide d'une methode de courte duree pour eviter la segregation et de mesurer precisement l'aptitude a l'ecoulement de ces melanges.

The Halo Boundary of Galaxy Clusters in the SDSS

NASA Astrophysics Data System (ADS)

Baxter, Eric; Chang, Chihway; Jain, Bhuvnesh; Adhikari, Susmita; Dalal, Neal; Kravtsov, Andrey; More, Surhud; Rozo, Eduardo; Rykoff, Eli; Sheth, Ravi K.

2017-05-01

Analytical models and simulations predict a rapid decline in the halo density profile associated with the transition from the “infalling” regime outside the halo to the “collapsed” regime within the halo. Using data from SDSS, we explore evidence for such a feature in the density profiles of galaxy clusters using several different approaches. We first estimate the steepening of the outer galaxy density profile around clusters, finding evidence for truncation of the halo profile. Next, we measure the galaxy density profile around clusters using two sets of galaxies selected on color. We find evidence of an abrupt change in galaxy colors that coincides with the location of the steepening of the density profile. Since galaxies that have completed orbits within the cluster are more likely to be quenched of star formation and thus appear redder, this abrupt change in galaxy color can be associated with the transition from single-stream to multi-stream regimes. We also use a standard model comparison approach to measure evidence for a “splashback”-like feature, but find that this approach is very sensitive to modeling assumptions. Finally, we perform measurements using an independent cluster catalog to test for potential systematic errors associated with cluster selection. We identify several avenues for future work: improved understanding of the small-scale galaxy profile, lensing measurements, identification of proxies for the halo accretion rate, and other tests. With upcoming data from the DES, KiDS, and HSC surveys, we can expect significant improvements in the study of halo boundaries.

Thermal conditions of rock slopes below unstable infrastructure in Alpine permafrost area: the cases of the Cosmiques hut and the Grands Montets cable-car station (Mont Blanc massif)

NASA Astrophysics Data System (ADS)

Duvillard, Pierre-Allain; Magnin, Florence; Mörtl, Christian; Ravanel, Ludovic; Deline, Philip

2017-04-01

Thermal state of steep permafrost-affected rock faces is crucial to assess the safety and reliability of mountain infrastructure as current permafrost degradation affects the rock slope stability. In the Mont-Blanc massif, 23 infrastructures are built on such a rock face with 13 of them that are characterized by a high risk of destabilization (Duvillard et al., 2015), including the upper station of the Grands Montets cable car (3325 m a.s.l.) as well as the Cosmiques hut (3613 m a.s.l.) on which we will focus. These two buildings have already been affected by different geomorphological processes. A rockfall event (600 m3) occurred for example on the SE face on the Arête inférieure des Cosmiques on the 21st of August 1998 (Ravanel et al., 2013) and the Grands Montets case shows a slow subsidence of the stairway over the last decade. In order to better assess the role of the permafrost in these processes and to gain insight on possible future geomorphic activity, we characterized the current permafrost conditions and simulated its changes up to the end of the 21st century using two complementary approaches: (i) the result of ERT (Electrical Resistivity Tomography) surveys carried out in October 2016 on the northern and southern faces right below the Cosmiques hut (at the level of the foundations) and at the Aiguilles des Grands Montets; (ii) the modeling of mean annual rock surface temperature for 2016 and at the end of the 21st century (Magnin et al., in rev.). Duvillard P.-A., Ravanel L., Deline P. (2015). Risk assessment of infrastructure destabilisation due to global warming in the high French Alps. Journal of Alpine Research, 103 (2). Magnin F., Josnin J.-Y., Ravanel L., Pergaud J., Pohl B., Deline P. (in rev.). Modelling rock wall permafrost degradation in the Mont Blanc massif from the LIA to the end of the 21st century. The Cryosphere Discuss., doi:10.5194/tc-2016-132. Ravanel L., Deline P., Lambiel C. and Vincent C. (2013). Instability of a high alpine rock ridge: the lower arête des Cosmiques, Mont-Blanc massif, France. Geografiska Annaler A, 95 : 51-66.

Stacked Weak Lensing Mass Calibration: Estimators, Systematics, and Impact on Cosmological Parameter Constraints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rozo, Eduardo; /U. Chicago /Chicago U., KICP; Wu, Hao-Yi

2011-11-04

When extracting the weak lensing shear signal, one may employ either locally normalized or globally normalized shear estimators. The former is the standard approach when estimating cluster masses, while the latter is the more common method among peak finding efforts. While both approaches have identical signal-to-noise in the weak lensing limit, it is possible that higher order corrections or systematic considerations make one estimator preferable over the other. In this paper, we consider the efficacy of both estimators within the context of stacked weak lensing mass estimation in the Dark Energy Survey (DES). We find that the two estimators havemore » nearly identical statistical precision, even after including higher order corrections, but that these corrections must be incorporated into the analysis to avoid observationally relevant biases in the recovered masses. We also demonstrate that finite bin-width effects may be significant if not properly accounted for, and that the two estimators exhibit different systematics, particularly with respect to contamination of the source catalog by foreground galaxies. Thus, the two estimators may be employed as a systematic cross-check of each other. Stacked weak lensing in the DES should allow for the mean mass of galaxy clusters to be calibrated to {approx}2% precision (statistical only), which can improve the figure of merit of the DES cluster abundance experiment by a factor of {approx}3 relative to the self-calibration expectation. A companion paper investigates how the two types of estimators considered here impact weak lensing peak finding efforts.« less

Etude de l'amelioration de la qualite des anodes par la modification des proprietes du brai

NASA Astrophysics Data System (ADS)

Bureau, Julie

La qualite des anodes produites se doit d'etre bonne afin d'obtenir de l'aluminium primaire tout en reduisant le cout de production du metal, la consommation d'energie et les emissions environnementales. Or, l'obtention des proprietes finales de l'anode necessite une liaison satisfaisante entre le coke et le brai. Toutefois, la matiere premiere actuelle n'assure pas forcement la compatibilite entre le coke et le brai. Une des solutions les plus prometteuses, pour ameliorer la cohesion entre ces deux materiaux, est la modification des proprietes du brai. L'objectif de ce travail consiste a modifier les proprietes du brai par l'ajout d'additifs chimiques afin d'ameliorer la mouillabilite du coke par le brai modifie pour produire des anodes de meilleure qualite. La composition chimique du brai est modifiee en utilisant des tensioactifs ou agents de modification de surface choisis dans le but d'enrichir les groupements fonctionnels susceptibles d'ameliorer la mouillabilite. L'aspect economique, l'empreinte environnementale et l'impact sur la production sont consideres dans la selection des additifs chimiques. Afin de realiser ce travail, la methodologie consiste a d'abord caracteriser les brais non modifies, les additifs chimiques et les cokes par la spectroscopie infrarouge a transformee de Fourier (FTIR) afin d'identifier les groupements chimiques presents. Puis, les brais sont modifies en ajoutant un additif chimique afin de possiblement modifier ses proprietes. Differentes quantites d'additif sont ajoutees afin d'examiner l'effet de la variation de la concentration sur les proprietes du brai modifie. La methode FTIR permet d'evaluer la composition chimique des brais modifies afin de constater si l'augmentation de la concentration d'additif enrichit les groupements fonctionnels favorisant l'adhesion coke/brai. Ensuite, la mouillabilite du coke par le brai est observee par la methode goutte- sessile. Une amelioration de la mouillabilite par la modification a l'aide d'un additif chimique signifie une possible amelioration de l'interaction entre le coke et le brai modifie. Afin de completer l'evaluation des donnees recueillies, les resultats de la FTIR et de la mouillabilite sont analyses par le reseau neuronal artificiel afin de mieux comprendre les mecanismes sous-jacents. A la lumiere des resultats obtenus, les additifs chimiques les plus prometteurs sont selectionnes afin de verifier l'effet de leur utilisation sur la qualite des anodes. Pour ce faire, des anodes de laboratoire sont produites en utilisant des brais non modifies et des brais modifies avec les additifs chimiques selectionnes. Par la suite, les anodes sont carottees afin de les caracteriser en determinant certaines de leurs proprietes physiques et chimiques. Enfin, les resultats des echantillons d'anodes faites d'un meme brai non modifie et modifie sont compares afin d'evaluer l'amelioration de la qualite des anodes. Finalement, un examen de l'impact possible de l'utilisation d'un additif chimique pour modifier le brai sur la consommation energetique et en carbone ainsi que la quantite d'aluminium produit est realise. Afin de modifier le brai, trois differents additifs chimiques sont selectionnes, soit un tensioactif et deux agents de modification de surface. L'analyse FTIR des experimentations menees sur les brais modifies demontre que deux additifs ont modifie la composition chimique des brais experimentes. L'analyse des resultats des tests goutte-sessile laisse supposer qu'un brai modifie par ces deux additifs ameliore possiblement l'interaction avec les cokes employes dans cette etude. L'analyse par reseau neuronal artificiel des donnees recueillies permet de mieux comprendre le lien entre la composition chimique d'un brai et sa capacite de mouillabilite avec un coke. La caracterisation des echantillons d'anodes produites permet d'affirmer que ces deux additifs peuvent ameliorer certaines des proprietes anodiques comparativement aux echantillons standards. L'analyse des resultats demontre que l'un des deux additifs semble donner des resultats plus prometteurs. Au final, les travaux realises au cours de ce projet demontrent qu'il est possible d'ameliorer la qualite anodique en modifiant les proprietes du brai. De plus, l'analyse des resultats obtenus fournit une meilleure comprehension des mecanismes entre un brai et un additif chimique.

Using a Microbial Physiologic and Genetic Approach to Investigate How Bacteria Sense Physical Stimuli

ERIC Educational Resources Information Center

Mussi, María Alejandra; Actis, Luis A.; de Mendoza, Diego; Cybulski, Larisa E.

2014-01-01

A laboratory exercise was designed to illustrate how physical stimuli such as temperature and light are sensed and processed by bacteria to elaborate adaptive responses. In particular, we use the well-characterized Des pathway of "Bacillus subtilis" to show that temperature modulates gene expression, resulting ultimately in modification…

Vers une approche plus rationnelle des temps verbaux (Toward a More Rational Approach to Verb Tenses).

ERIC Educational Resources Information Center

Montredon, Jacques

1983-01-01

Experiences in teaching French verb tenses to Japanese students are used to illustrate teaching techniques that not only help students acquire verb forms but also present them as a coherent linguistic unity tied to fundamental communicative needs. A variety of exercises are included. (MSE)

Modélisation d'un choc thermique doux d'un verre S.S.C en utilisant l'approche thermomécanique

NASA Astrophysics Data System (ADS)

Malou, Z.; Hamidouche, M.; Madjoubi, M. A.; Bousbaa, C.; Bouaouadja, N.

2005-05-01

Dans ce travail, nous avons étudié l'endommagement du verre silico-sodo-calcique (trois différentes épaisseurs : 2mm, 4mm, et 8mm) par choc thermique descendant. Nous avons utilisé l'approche thermomécanique en terme de facteur d'intensité de contrainte en se basant sur un calcul numérique. Le choc thermique descendant, est la mise en contact brutal d'un échantillon, préalablement chauffé à une température Ti, avec un milieu dont la température Tf est inférieure à Ti. Le gradient thermique engendré induit des contraintes de tension dans les couches superficielles du corps. Ces contraintes peuvent conduire à la rupture du matériau. Les hypothèses prises en compte lors de la simulation sont comme suit : Le refroidissement des échantillons en verre chauffés à différentes températures, inférieures à sa température de transition, est fait par jet d'air à 20° C pendant 6 secondes. Ce temps est suffisant pour que la température des échantillons atteigne l'ambiante. Le coefficient de transfert de chaleur est de 600 W/°C.m2. Les températures chaudes ont été variées entre 100° C et 450° C. Lors des calculs, nous avons intégré, l'évolutions en fonction de la température des propriétés thermoélastiques du verre. Dans un premier temps, nous avons déterminé les températures et les contraintes transitoires dans l'échantillon à tout instant du choc thermique. Ensuite, nous avons déterminé l'évolution du facteur d'intensité de contrainte (FIC) durant le refroidissement. Enfin, les FIC calculés sont comparés à la ténacité (K1c) du matériau. Cette dernière a été mesurée en utilisant la mécanique linéaire de la rupture. Nous avons vérifié que quand le facteur FIC atteint la valeur de la ténacité dans la zone des défauts critiques, ces derniers se propagent d'une manière brutale causant ainsi la dégradation de l'échantillon. Par cette technique, nous avons directement accès à l'écart de température critique au delà duquel le verre rompt. Nous avant trouvé qu' un choc thermique effectué à partir d'une température chaude de 250° C conduit à des écarts de température cœur surface plus importants à mesure que l'échantillon est plus épais. Ces conditions engendrent des contraintes transitoires maximales (21.2 MPa, 36 MPa et 56.2 MPa) au premiers instants du refroidissement (0.075 s, 0.23 s et 0.659 s) respectivement pour les épaisseurs 2 mm, 4 mm et 8 mm. L'évolution des facteurs d'intensité de contrainte FIC montre que les défauts préexistants atteignent la longueur la plus grande après choc thermique pour l'échantillon le plus épais. Le choc thermique descendant est plus néfaste pour la plus grande l'épaisseur.

On the verification of intransitive noninterference in mulitlevel security.

PubMed

Ben Hadj-Alouane, Nejib; Lafrance, Stéphane; Lin, Feng; Mullins, John; Yeddes, Mohamed Moez

2005-10-01

We propose an algorithmic approach to the problem of verification of the property of intransitive noninterference (INI), using tools and concepts of discrete event systems (DES). INI can be used to characterize and solve several important security problems in multilevel security systems. In a previous work, we have established the notion of iP-observability, which precisely captures the property of INI. We have also developed an algorithm for checking iP-observability by indirectly checking P-observability for systems with at most three security levels. In this paper, we generalize the results for systems with any finite number of security levels by developing a direct method for checking iP-observability, based on an insightful observation that the iP function is a left congruence in terms of relations on formal languages. To demonstrate the applicability of our approach, we propose a formal method to detect denial of service vulnerabilities in security protocols based on INI. This method is illustrated using the TCP/IP protocol. The work extends the theory of supervisory control of DES to a new application domain.

Les conseils des cliniciens canadiens en matière de commotion dans le sport sont-ils cohérents?

PubMed Central

Carson, James D.; Rendely, Alexandra; Garel, Alisha; Meaney, Christopher; Stoller, Jacqueline; Kaicker, Jatin; Hayden, Leigh; Moineddin, Rahim; Frémont, Pierre

2016-01-01

Résumé Objectif Comparer les connaissances et l’utilisation des recommandations concernant la prise en charge de la commotion dans le sport (CDS) démontrées par les spécialistes de la médecine du sport et de l’exercice (SMSE) et les urgentologues afin d’évaluer la réussite du transfert des connaissances sur la CDS au Canada. Conception Un sondage à choix multiples envoyé par courriel et autoadministré par des SMSE et des urgentologues. La validité du contenu du sondage a fait l’objet d’une évaluation. Contexte Canada. Participants Le sondage a été complété entre mai et juillet 2012 par des SMSE qui ont réussi l’examen menant au diplôme de l’Académie canadienne de la médecine du sport et de l’exercice et des urgentologues qui n’avaient pas ce diplôme. Principaux paramètres à l’étude La connaissance et l’identification des sources d’information sur la prise en charge des commotions, l’utilisation des stratégies de diagnostic de la commotion et l’utilisation d’une terminologie courante et cohérente dans l’explication des stratégies de repos aux patients après une CDS. Résultats Le taux de réponse était de 28 % (305 sur 1085). Les taux de réponse par les SMSE et les urgentologues se situaient respectivement à 41 % (147 sur 360) et 22 % (158 sur 725). Parmi les répondants, 41 % des urgentologues et 3 % des SMSE n’étaient pas au courant de l’existence de déclarations consensuelles sur la commotion dans le sport; 74 % des SMSE utilisaient « habituellement ou toujours » la version 2 de l’Outil d’évaluation de la commotion dans le sport (SCAT2), tandis que 88 % des urgentologues n’utilisaient jamais le SCAT2. Aucune réponse uniforme n’a été documentée à la question visant à connaître les meilleurs modes de repos cognitif. Conclusion Nous avons cerné des différences et un manque d’uniformité chez les SMSE et les urgentologues dans la mise en application des recommandations concernant les patients ayant subi une CDS. Il semble que le SCAT2 soit davantage utilisé dans le milieu des SMSE que dans le contexte de l’urgence. Des efforts plus poussés de transfert des connaissances et en recherche devraient atténuer les obstacles à des conseils plus uniformes donnés par les médecins qui soignent des patients ayant subi une CDS.

Soins primaires aux adultes ayant une déficience développementale

PubMed Central

Sullivan, William F.; Berg, Joseph M.; Bradley, Elspeth; Cheetham, Tom; Denton, Richard; Heng, John; Hennen, Brian; Joyce, David; Kelly, Maureen; Korossy, Marika; Lunsky, Yona; McMillan, Shirley

2011-01-01

Résumé Objectif Mettre à jour les lignes directrices canadiennes de 2006 sur les soins primaires aux adultes ayant une déficience développementale (DD) et présenter des recommandations pratiques fondées sur les connaissances actuelles pour traiter des problèmes de santé particuliers chez des adultes ayant une DD. Qualité des preuves Des professionnels de la santé expérimentés participant à un colloque et un groupe de travail subséquent ont discuté et convenu des révisions aux lignes directrices de 2006 en se fondant sur une recherche documentaire exhaustive, la rétroaction obtenue des utilisateurs du guide de pratique et les expériences cliniques personnelles. La plupart des preuves disponibles dans ce domaine viennent de l’opinion d’experts ou de déclarations consensuelles publiées (niveau III). Message principal Les adultes ayant une DD ont des problèmes de santé complexes, dont plusieurs diffèrent de ceux de la population en général. De bons soins primaires permettent d’identifier les problèmes de santé particuliers dont souffrent les adultes ayant une DD pour améliorer leur qualité de vie et leur accès aux soins de santé et prévenir la morbidité et le décès prématuré. Ces lignes directrices résument les problèmes de santé générale, physique, comportementale et mentale des adultes ayant une DD que devraient connaître les professionnels des soins primaires et présentent des recommandations pour le dépistage et la prise en charge en se basant sur les connaissances actuelles que les cliniciens peuvent mettre en pratique. En raison de l’interaction des facteurs biologiques, psychoaffectifs et sociaux qui contribuent à la santé et au bien-être des adultes ayant une DD, ces lignes directrices insistent sur la participation des aidants, l’adaptation des interventions, au besoin, et la consultation auprès de divers professionnels de la santé quand ils sont accessibles. Elles mettent aussi en évidence la nature éthique des soins. Les lignes directrices sont formulées dans le contexte d’un cadre éthique qui tient compte des questions comme le consentement éclairé et l’évaluation des bienfaits pour la santé par rapport aux risques de préjudice. Conclusion La mise en œuvre des lignes directrices proposées ici améliorerait la santé des adultes ayant une DD et minimiserait les disparités sur les plans de la santé et des soins de santé entre les adultes ayant une DD et la population en général.

Direct electrical stimulation of human cortex evokes high gamma activity that predicts conscious somatosensory perception

NASA Astrophysics Data System (ADS)

Muller, Leah; Rolston, John D.; Fox, Neal P.; Knowlton, Robert; Rao, Vikram R.; Chang, Edward F.

2018-04-01

Objective. Direct electrical stimulation (DES) is a clinical gold standard for human brain mapping and readily evokes conscious percepts, yet the neurophysiological changes underlying these percepts are not well understood. Approach. To determine the neural correlates of DES, we stimulated the somatosensory cortex of ten human participants at frequency-amplitude combinations that both elicited and failed to elicit conscious percepts, meanwhile recording neural activity directly surrounding the stimulation site. We then compared the neural activity of perceived trials to that of non-perceived trials. Main results. We found that stimulation evokes distributed high gamma activity, which correlates with conscious perception better than stimulation parameters themselves. Significance. Our findings suggest that high gamma activity is a reliable biomarker for perception evoked by both natural and electrical stimuli.

Prenatal diethylstilbestrol induces malformation of the external genitalia of male and female mice and persistent second-generation developmental abnormalities of the external genitalia in two mouse strains

PubMed Central

Mahawong, Phitsanu; Sinclair, Adriane; Li, Yi; Schlomer, Bruce; Rodriguez, Esequiel; Max, Ferretti M.; Liu, Baomei; Baskin, Laurence S.; Cunha, Gerald R.

2014-01-01

Potential trans-generational influence of diethylstilbestrol (DES) exposure emerged with reports of effects in grandchildren of DES-treated pregnant women and of reproductive tract tumors in offspring of mice exposed in utero to DES. Accordingly, we examined the trans-generational influence of DES on development of external genitalia (ExG) and compared effects of in utero DES exposure in CD-1 and C57BL/6 mice injected with oil or DES every other day from gestational days 12 to 18. Mice were examined at birth, and on 5 to 120 days postnatal to evaluate ExG malformations. Of 23 adult (≥60 days) prenatally DES-exposed males, features indicative of urethral meatal hypospadias (see text for definitions) ranged from 18 to 100% in prenatally DES-exposed CD-1 males and 31 to 100% in prenatally DES-exposed C57BL/6 males. Thus, the strains differed in the incidence of male urethral hypospadias. Ninety-one percent of DES-exposed CD-1 females and 100% of DES-exposed C57BL/6 females had urethral-vaginal fistula. All DES-exposed CD-1 and C57BL/6 females lacked an os clitoris. None of the prenatally oil-treated CD-1 and C57BL/6 male and female mice had ExG malformations. For the second-generation study, 10 adult CD-1 males and females, from oil- and DES-exposed groups, respectively, were paired with untreated CD-1 mice for 30 days, and their offspring evaluated for ExG malformations. None of the F1 DES-treated females were fertile. Nine of 10 prenatally DES-exposed CD-1 males sired offspring with untreated females, producing 55 male and 42 female pups. Of the F2 DES-lineage adult males, 20% had exposed urethral flaps, a criterion of urethral meatal hypospadias. Five of 42 (11.9%) F2 DES lineage females had urethral-vaginal fistula. In contrast, all F2 oil-lineage males and all oil-lineage females were normal. Thus, prenatal DES exposure induces malformations of ExG in both sexes and strains of mice, and certain malformations are transmitted to the second-generation. PMID:25449352

Fiches pratiques: Si on jouait a la famille Dubois...; Pic et pic...et phonetique; Les rendez-vous des souvenirs; A l'ami (Practical Ideas: Let's Play House; Tick and Tick...and Phonetic; Rendezvous with Memories; To My Friend).

ERIC Educational Resources Information Center

Bravo, Maria Antonia Lavandera; And Others

1991-01-01

Four activities for French language classroom use are presented, including a simulation of the relationships and communication within a family; pronunciation instruction through phonetic transcription; cultural awareness through students' analysis of their own and their parents' specific memories; and analysis and comparison of a literary text and…

DIMED 86: Discurso dos Media e Ensino a Distancia = Discours des Media et Enseignement a Distance = Media Speech and Distance Teaching. Papers Presented at a Seminar (21st, Algarve, Portugal, March 10-15, 1986).

ERIC Educational Resources Information Center

Coelho, Maria Eduarda Leal

Presentations at this seminar on distance education focused on the different types of speech in multimedia presentations which contribute to the elaboration (simulated or substituted) of a situation involving different relationships. In addition to opening and closing remarks by Marcel de Greve and a final report by the Scientific Committee of…

Methodes iteratives paralleles: Applications en neutronique et en mecanique des fluides

NASA Astrophysics Data System (ADS)

Qaddouri, Abdessamad

Dans cette these, le calcul parallele est applique successivement a la neutronique et a la mecanique des fluides. Dans chacune de ces deux applications, des methodes iteratives sont utilisees pour resoudre le systeme d'equations algebriques resultant de la discretisation des equations du probleme physique. Dans le probleme de neutronique, le calcul des matrices des probabilites de collision (PC) ainsi qu'un schema iteratif multigroupe utilisant une methode inverse de puissance sont parallelises. Dans le probleme de mecanique des fluides, un code d'elements finis utilisant un algorithme iteratif du type GMRES preconditionne est parallelise. Cette these est presentee sous forme de six articles suivis d'une conclusion. Les cinq premiers articles traitent des applications en neutronique, articles qui representent l'evolution de notre travail dans ce domaine. Cette evolution passe par un calcul parallele des matrices des PC et un algorithme multigroupe parallele teste sur un probleme unidimensionnel (article 1), puis par deux algorithmes paralleles l'un mutiregion l'autre multigroupe, testes sur des problemes bidimensionnels (articles 2--3). Ces deux premieres etapes sont suivies par l'application de deux techniques d'acceleration, le rebalancement neutronique et la minimisation du residu aux deux algorithmes paralleles (article 4). Finalement, on a mis en oeuvre l'algorithme multigroupe et le calcul parallele des matrices des PC sur un code de production DRAGON ou les tests sont plus realistes et peuvent etre tridimensionnels (article 5). Le sixieme article (article 6), consacre a l'application a la mecanique des fluides, traite la parallelisation d'un code d'elements finis FES ou le partitionneur de graphe METIS et la librairie PSPARSLIB sont utilises.

Nanostructure, hydrogen bonding and rheology in choline chloride deep eutectic solvents as a function of the hydrogen bond donor.

PubMed

Stefanovic, Ryan; Ludwig, Michael; Webber, Grant B; Atkin, Rob; Page, Alister J

2017-01-25

Deep eutectic solvents (DESs) are a mixture of a salt and a molecular hydrogen bond donor, which form a eutectic liquid with a depressed melting point. Quantum mechanical molecular dynamics (QM/MD) simulations have been used to probe the 1 : 2 choline chloride-urea (ChCl : U), choline chloride-ethylene glycol (ChCl : EG) and choline chloride-glycerol (ChCl : Gly) DESs. DES nanostructure and interactions between the ions is used to rationalise differences in DES eutectic point temperatures and viscosity. Simulations show that the structure of the bulk hydrogen bond donor is largely preserved for hydroxyl based hydrogen bond donors (ChCl:Gly and ChCl:EG), resulting in a smaller melting point depression. By contrast, ChCl:U exhibits a well-established hydrogen bond network between the salt and hydrogen bond donor, leading to a larger melting point depression. This extensive hydrogen bond network in ChCl:U also leads to substantially higher viscosity, compared to ChCl:EG and ChCl:Gly. Of the two hydroxyl based DESs, ChCl:Gly also exhibits a higher viscosity than ChCl:EG. This is attributed to the over-saturation of hydrogen bond donor groups in the ChCl:Gly bulk, which leads to more extensive hydrogen bond donor self-interaction and hence higher cohesive forces within the bulk liquid.

[High fidelity simulation : a new tool for learning and research in pediatrics].

PubMed

Bragard, I; Farhat, N; Seghaye, M-C; Schumacher, K

2016-10-01

Caring for a sick child represents a high risk activity that requires technical and non-technical skills related to several factors such as the rarity of certain events or the stress of caring for a child. As regard these conditions, medi¬cal simulation provides a learning environment without risk, the control of variables, the reproducibility of situations, and the confrontation with rare events. In this article, we des¬cribe the steps of a simulation session and outline the current knowledge of the use of simulation in paediatrics. A session of simulation includes seven phases following the model of Peter Dieckmann, particularly the scenario and the debriefing that form the heart of the learning experience. Several studies have shown the advantages of simulation for paediatric trai¬ning in terms of changes in attitudes, skills and knowledge. Some studies have demonstrated a beneficial transfer to prac¬tice. In conclusion, simulation provides great potential for training and research in paediatrics. The establishment of a collaborative research program by the whole simulation com¬munity would help ensure that this type of training improves the quality of care.

Membrane fluidization by alcohols inhibits DesK-DesR signalling in Bacillus subtilis.

PubMed

Vaňousová, Kateřina; Beranová, Jana; Fišer, Radovan; Jemioła-Rzemińska, Malgorzata; Matyska Lišková, Petra; Cybulski, Larisa; Strzałka, Kazimierz; Konopásek, Ivo

2018-03-01

After cold shock, the Bacillus subtilis desaturase Des introduces double bonds into the fatty acids of existing membrane phospholipids. The synthesis of Des is regulated exclusively by the two-component system DesK/DesR; DesK serves as a sensor of the state of the membrane and triggers Des synthesis after a decrease in membrane fluidity. The aim of our work is to investigate the biophysical changes in the membrane that are able to affect the DesK signalling state. Using linear alcohols (ethanol, propanol, butanol, hexanol, octanol) and benzyl alcohol, we were able to suppress Des synthesis after a temperature downshift. The changes in the biophysical properties of the membrane caused by alcohol addition were followed using membrane fluorescent probes and differential scanning calorimetry. We found that the membrane fluidization induced by alcohols was reflected in an increased hydration at the lipid-water interface. This is associated with a decrease in DesK activity. The addition of alcohol mimics a temperature increase, which can be measured isothermically by fluorescence anisotropy. The effect of alcohols on the membrane periphery is in line with the concept of the mechanism by which two hydrophilic motifs located at opposite ends of the transmembrane region of DesK, which work as a molecular caliper, sense temperature-dependent variations in membrane properties. Copyright © 2017 Elsevier B.V. All rights reserved.

Amelioration de l'implementation des volets dans un modele de dynamique et controle de vol de l'avion L1011-500

NASA Astrophysics Data System (ADS)

Saafi, Kais

The aerodynamic model of the aircraft L1011-500 was designed and simulated in Matlab and Simulink by Bombardier to serve the Esterline-CMC Electronics Company in its goals to improve the Flight Management System FMS. In this model implemented in FLSIM by CMC-Electronics Esterline, a longitudinal instability appears during the approach phase and when flaps have a higher or equal angle to 4 degrees. The global project at LARCASE consisted in the improvement of the L1011-500 aerodynamic model stability under Matlab / Simulink and mainly for flaps angles situated between 4 degrees and 22 degrees. The L1011-500 global model was finalized in order to visualize and analyze its dynamic behavior. When the global model of the aircraft L1011-500 was generated, corrections were added to the lift coefficient (CL), the drag coefficient (CD) and the pitching moment coefficient (CM) to ensure the trim of the aircraft. The obtained results are compared with the flight tests data delivered by CMC Electronics-Esterline to validate our numerical studies.

An Efficient Biometric-Based Algorithm Using Heart Rate Variability for Securing Body Sensor Networks

PubMed Central

Pirbhulal, Sandeep; Zhang, Heye; Mukhopadhyay, Subhas Chandra; Li, Chunyue; Wang, Yumei; Li, Guanglin; Wu, Wanqing; Zhang, Yuan-Ting

2015-01-01

Body Sensor Network (BSN) is a network of several associated sensor nodes on, inside or around the human body to monitor vital signals, such as, Electroencephalogram (EEG), Photoplethysmography (PPG), Electrocardiogram (ECG), etc. Each sensor node in BSN delivers major information; therefore, it is very significant to provide data confidentiality and security. All existing approaches to secure BSN are based on complex cryptographic key generation procedures, which not only demands high resource utilization and computation time, but also consumes large amount of energy, power and memory during data transmission. However, it is indispensable to put forward energy efficient and computationally less complex authentication technique for BSN. In this paper, a novel biometric-based algorithm is proposed, which utilizes Heart Rate Variability (HRV) for simple key generation process to secure BSN. Our proposed algorithm is compared with three data authentication techniques, namely Physiological Signal based Key Agreement (PSKA), Data Encryption Standard (DES) and Rivest Shamir Adleman (RSA). Simulation is performed in Matlab and results suggest that proposed algorithm is quite efficient in terms of transmission time utilization, average remaining energy and total power consumption. PMID:26131666

An Efficient Biometric-Based Algorithm Using Heart Rate Variability for Securing Body Sensor Networks.

PubMed

Pirbhulal, Sandeep; Zhang, Heye; Mukhopadhyay, Subhas Chandra; Li, Chunyue; Wang, Yumei; Li, Guanglin; Wu, Wanqing; Zhang, Yuan-Ting

2015-06-26

Body Sensor Network (BSN) is a network of several associated sensor nodes on, inside or around the human body to monitor vital signals, such as, Electroencephalogram (EEG), Photoplethysmography (PPG), Electrocardiogram (ECG), etc. Each sensor node in BSN delivers major information; therefore, it is very significant to provide data confidentiality and security. All existing approaches to secure BSN are based on complex cryptographic key generation procedures, which not only demands high resource utilization and computation time, but also consumes large amount of energy, power and memory during data transmission. However, it is indispensable to put forward energy efficient and computationally less complex authentication technique for BSN. In this paper, a novel biometric-based algorithm is proposed, which utilizes Heart Rate Variability (HRV) for simple key generation process to secure BSN. Our proposed algorithm is compared with three data authentication techniques, namely Physiological Signal based Key Agreement (PSKA), Data Encryption Standard (DES) and Rivest Shamir Adleman (RSA). Simulation is performed in Matlab and results suggest that proposed algorithm is quite efficient in terms of transmission time utilization, average remaining energy and total power consumption.

Le patrimoine astronomique provençal

NASA Astrophysics Data System (ADS)

Rous, M.; Figon, P.; Guyot, S.

2012-12-01

L'OSU OAMP/Institut Pythéas porte les missions de conservation, inventaire et valorisation du patrimoine. Suite à la fusion de l'Observatoire de Marseille et du Laboratoire d'Astronomie Spatiale en 2000 pour créer le Laboratoire d'Astrophysique de Marseille, le déménagement des équipes sur le site de Château-Gombert en 2008 a soulevé le problème du devenir des collections des deux sites d'origine. Nous ferons le bilan des actions passées en matière de conservation et de valorisation de ce riche patrimoine : versement à l'inventaire général du Ministère de la Culture, classement de 22 instruments au titre des Monuments Historiques, inventaire et numérisation des archives anciennes, montage d'expositions et réalisation du catalogue Telescopium, 400 ans de lunettes et de télescopes. Nous présenterons les actions en cours: mesures de conservation préventive, inventaire des archives et des instruments. Nous parlerons enfin des projets: création d'un espace d'exposition permanente, participation à des expositions temporaires.

Nanomedicine for the reduction of the thrombogenicity of stent coatings

PubMed Central

Karagkiozaki, Varvara C; Logothetidis, Stergios D; Kassavetis, Spyridon N; Giannoglou, George D

2010-01-01

The treatment of patients with drug-eluting stents (DES) continues to evolve with the current emergence of DES technology that offers a combination of pharmacological and mechanical approaches to prevent arterial restenosis. However, despite the promising short-term and mid-term outcomes of DES, there are valid concerns about adverse clinical effects of late stent thrombosis. In this study, we present an example of how nanomedicine can offer solutions for improving stent coating manufacturing, by producing nanomaterials with tailored and controllable properties. The study is based on the exploitation of human platelets response towards carbon-based nanocoatings via atomic force microscope (AFM). AFM can facilitate the comprehensive analysis of platelets behavior onto stent nanocoatings and enable the study of thrombogenicity. Platelet-rich plasma from healthy donors was used for the real-time study of biointerfacial interactions. The carbon nanomaterials were developed by rf magnetron sputtering technique under controllable deposition conditions to provide favorable surface nanotopography. It was shown that by altering the surface topography of nanocoatings, the activation of platelets can be affected, while the carbon nanocoatings having higher surface roughness were found to be less thrombogenic in terms of platelets adhesion. This is an actual solution for improving the stent coating fabrication. PMID:20463940

Séchage d'un enduit pigmenté avec application à l'étude d'une couche papetière

NASA Astrophysics Data System (ADS)

Bernada, P.; Bruneau, D.

1996-07-01

Paper color coating drying is investigated from several experimental view points which include drying kinetics and time evolution of moisture content profiles, pore size distribution in the dried coating, and natural binder (starch) distribution in the dried coating. A study of the effects of drying conditions on those experimental parameters is carried out. Furthermore, gelification and consolidation characteristic moisture contents of the coating are determined using a graphical approach. Le séchage d'un enduit pigmenté à l'usage d'une couche papetière est absorbé sous diverts aspects : cinétiques de séchage et évolution temporelle des profils de teneur en eau, profils de répartition de la taille des pores dans la couche séchée, et répartition finale d'un liant hydrophile de la sauce de couchage (amidon). Les conséquences des conditions de séchage sur ces paramètres expérimentaux sont mises en évidence. De plus, les teneurs en eau caractéristiques de gélification et consolidation de la sauce de couchage sont obtenues par une approche graphique.

Self-assembly and release of peste des petits ruminants virus-like particles in an insect cell-baculovirus system and their immunogenicity in mice and goats.

PubMed

Li, Wenchao; Jin, Hongyan; Sui, Xiukun; Zhao, Zhanzhong; Yang, Chenghuai; Wang, Wenquan; Li, Junping; Li, Gang

2014-01-01

Peste des petits ruminants (PPR) is an acute, febrile, viral disease of small ruminants that has a significant economic impact. For many viral diseases, vaccination with virus-like particles (VLPs) has shown considerable promise as a prophylactic approach; however, the processes of assembly and release of peste des petits ruminants virus (PPRV) VLPs are not well characterized, and their immunogenicity in the host is unknown. In this study, VLPs of PPRV were generated in a baculovirus system through simultaneous expression of PPRV matrix (M) protein and hemaglutin in (H) or fusion (F) protein. The released VLPs showed morphology similar to that of the native virus particles. Subcutaneous injection of these VLPs (PPRV-H, PPRV-F) into mice and goats elicited PPRV-specific IgG production, increased the levels of virus neutralizing antibodies, and promoted lymphocyte proliferation. Without adjuvants, the immune response induced by the PPRV-H VLPs was comparable to that obtained using equivalent amounts of PPRV vaccine. Thus, our results demonstrated that VLPs containing PPRV M protein and H or F protein are potential "differentiating infected from vaccinated animals" (DIVA) vaccine candidates for the surveillance and eradication of PPR.

Modelisation de photodetecteurs a base de matrices de diodes avalanche monophotoniques pour tomographie d'emission par positrons

NASA Astrophysics Data System (ADS)

Corbeil Therrien, Audrey

La tomographie d'emission par positrons (TEP) est un outil precieux en recherche preclinique et pour le diagnostic medical. Cette technique permet d'obtenir une image quantitative de fonctions metaboliques specifiques par la detection de photons d'annihilation. La detection des ces photons se fait a l'aide de deux composantes. D'abord, un scintillateur convertit l'energie du photon 511 keV en photons du spectre visible. Ensuite, un photodetecteur convertit l'energie lumineuse en signal electrique. Recemment, les photodiodes avalanche monophotoniques (PAMP) disposees en matrice suscitent beaucoup d'interet pour la TEP. Ces matrices forment des detecteurs sensibles, robustes, compacts et avec une resolution en temps hors pair. Ces qualites en font un photodetecteur prometteur pour la TEP, mais il faut optimiser les parametres de la matrice et de l'electronique de lecture afin d'atteindre les performances optimales pour la TEP. L'optimisation de la matrice devient rapidement une operation difficile, car les differents parametres interagissent de maniere complexe avec les processus d'avalanche et de generation de bruit. Enfin, l'electronique de lecture pour les matrices de PAMP demeure encore rudimentaire et il serait profitable d'analyser differentes strategies de lecture. Pour repondre a cette question, la solution la plus economique est d'utiliser un simulateur pour converger vers la configuration donnant les meilleures performances. Les travaux de ce memoire presentent le developpement d'un tel simulateur. Celui-ci modelise le comportement d'une matrice de PAMP en se basant sur les equations de physique des semiconducteurs et des modeles probabilistes. Il inclut les trois principales sources de bruit, soit le bruit thermique, les declenchements intempestifs correles et la diaphonie optique. Le simulateur permet aussi de tester et de comparer de nouvelles approches pour l'electronique de lecture plus adaptees a ce type de detecteur. Au final, le simulateur vise a quantifier l'impact des parametres du photodetecteur sur la resolution en energie et la resolution en temps et ainsi optimiser les performances de la matrice de PAMP. Par exemple, l'augmentation du ratio de surface active ameliore les performances, mais seulement jusqu'a un certain point. D'autres phenomenes lies a la surface active, comme le bruit thermique, provoquent une degradation du resultat. Le simulateur nous permet de trouver un compromis entre ces deux extremes. Les simulations avec les parametres initiaux demontrent une efficacite de detection de 16,7 %, une resolution en energie de 14,2 % LMH et une resolution en temps de 0.478 ns LMH. Enfin, le simulateur propose, bien qu'il vise une application en TEP, peut etre adapte pour d'autres applications en modifiant la source de photons et en adaptant les objectifs de performances. Mots-cles : Photodetecteurs, photodiodes avalanche monophotoniques, semiconducteurs, tomographie d'emission par positrons, simulations, modelisation, detection monophotonique, scintillateurs, circuit d'etouffement, SPAD, SiPM, Photodiodes avalanche operees en mode Geiger

Analyse numerique de la microplasticite aux joints de grains dans les polycristaux metalliques CFC

NASA Astrophysics Data System (ADS)

Andriamisandratra, Mamiandrianina

La rupture par fatigue concerne aujourd’hui encore beaucoup de pièces métalliques soumises en service à un chargement répétitif. À l’échelle de la microstructure, les joints de grains sont connus pour jouer un rôle important dans la tenue en fatigue du matériau grâce au durcissement qu’ils confèrent. Cependant les joints de grains eux-mêmes ou la zone à leur proximité ont souvent été identifiés comme lieux d’amorçage de fissures de fatigue, particulièrement dans le cas des métaux cubiques à faces centrées (CFC). Dans le but de caractériser le comportement micromécanique à proximité de différents types de joint de grain, le comportement à l’interface en traction monotone uniaxiale a été modélisé par la méthode des éléments finis et une loi de plasticité cristalline a été utilisée. De plus, quelques configurations cristallographiques bicristallines ont alors été simulées et leur comportement a été analysé sous un chargement de traction axiale monotone. Le cadre de validité de la modélisation a été restreint à celui des petites déformations (<5%). Quatre critères importants dictant le comportement mécanique cristallin ont été identifiés. Il s’agit de la rigidité élastique, du facteur de Schmid des deux systèmes de glissement les plus favorables, et enfin du ratio entre ces deux plus forts facteurs de Schmid traduisant la propension au glissement simple ou multiple. Des simulations de traction sur des monocristaux ont ainsi permis de comprendre l’influence propre de chaque critère sur le comportement macroscopique (contraintes et déformations) et microscopique (glissements cristallins). Les calculs bicristallins ont ensuite mis en évidence l’activation particulière de certains systèmes de glissement à priori non favorables au niveau du joint de grain. Ce phénomène a été associé avec la nécessité d’assurer la compatibilité mécanique de déformation de part et d’autre de l’interface. Le profil de la déformation dans le sens longitudinal de l’éprouvette a montré une baisse systématique de déformation au niveau du joint et dont l’intensité augmente avec la désorientation angulaire entre les deux grains. L’hétérogénéité de la déformation en chaque section de l’éprouvette est quant à elle surtout liée au caractère fortement anisotrope de la plasticité et s’avère plus prononcée lorsque le mode de déformation est assuré par un glissement simple. Enfin, un cas bicristallin qui présentait une compatibilité microscopique des traces de glissement dans le plan du joint de grain a été étudié. Cependant, aucune corrélation avec le profil de glissement n’a été relevée, une cause macroscopique étant plus vraisemblablement à l’origine du profil observé. Mots-clés: joints de grains, localisation, plasticité cristalline, éléments finis, bicristal.

Quantification des besoins en intrants antipaludiques: contribution à l'actualisation des hypothèses pour la quantification des intrants de prise en charge des cas de paludisme grave en République Démocratique du Congo

PubMed Central

Likwela, Joris Losimba; Otokoye, John Otshudiema

2015-01-01

Les formes graves de paludisme à Plasmodium falciparum sont une cause majeure de décès des enfants de moins de 5 ans en Afrique Sub-saharienne. Un traitement rapide dépend de la disponibilité de médicaments appropriés au niveau des points de prestation de service. La fréquence des ruptures de stock des commodités antipaludiques, en particuliers celles utilisées pour le paludisme grave, avait nécessité une mise à jour des hypothèses de quantification. Les données issues de la collecte de routine du PNLP de 2007 à 2012 ont été comparées à celles rapportés par d'autres pays africains et utilisées pour orienter les discussions au cours d'un atelier organisé par le PNLP et ses partenaires techniques et financiers afin de dégager un consensus national. La proportion des cas de paludisme rapportés comme grave en RDC est resté autour d'une médiane de 7% avec un domaine de variation de 6 à 9%. Hormis la proportion rapportée au Kenya (2%), les pays africains ont rapporté une proportion de cas grave variant entre 5 et 7%. Il apparaît que la proportion de 1% précédemment utilisée pour la quantification en RDC a été sous-estimée dans le contexte de la gestion des cas graves sur terrain. Un consensus s'est dégagé autour de la proportion de 5% étant entendu que des efforts de renforcement des capacités seraient déployés afin d'améliorer le diagnostic au niveau des points de prestation des services. PMID:26213595

Soins primaires aux adultes ayant des déficiences intellectuelles et développementales

PubMed Central

Sullivan, William F.; Diepstra, Heidi; Heng, John; Ally, Shara; Bradley, Elspeth; Casson, Ian; Hennen, Brian; Kelly, Maureen; Korossy, Marika; McNeil, Karen; Abells, Dara; Amaria, Khush; Boyd, Kerry; Gemmill, Meg; Grier, Elizabeth; Kennie-Kaulbach, Natalie; Ketchell, Mackenzie; Ladouceur, Jessica; Lepp, Amanda; Lunsky, Yona; McMillan, Shirley; Niel, Ullanda; Sacks, Samantha; Shea, Sarah; Stringer, Katherine; Sue, Kyle; Witherbee, Sandra

2018-01-01

Résumé Objectif Mettre à jour les Lignes directrices consensuelles canadiennes 2011 en matière de soins primaires aux adultes ayant une déficience développementale. Méthodes Des médecins de famille et d’autres professionnels de la santé expérimentés dans les soins aux personnes ayant des DID ont examiné et synthétisé les récentes connaissances empiriques, d’écosystèmes, expertes et expérientielles. Un système a été conçu pour catégoriser la qualité des recommandations. Recommandations Les adultes ayant des DID sont un groupe hétérogène de patients qui présentent des affections médicales et des facteurs qui influent sur leur santé, qui diffèrent de ceux qui touchent les autres membres de la communauté de par leur nature, leurs manifestations, leur gravité ou leur complexité. Ces personnes nécessitent une approche de soins et des interventions adaptées à leurs besoins. Les présentes lignes directrices offrent des conseils en matière de normes de soins. Nous avons incorporé des références à des outils cliniques et à d’autres ressources pratiques. Les approches de soins décrites ici s’appliquent aussi à d’autres groupes de patients ayant un déficit cognitif ou de la communication, ou d’autres déficits des fonctions adaptatives. Conclusion À titre de fournisseurs de soins de première ligne, les médecins de famille jouent un rôle vital de promotion de la santé et de bien-être auprès des adultes ayant des DID. Ces lignes directrices peuvent les aider à prendre des décisions avec les patients et les aidants naturels. PMID:29650617

Gestion des ressources hydriques adaptee aux changements climatiques pour la production optimale d'hydroelectricite. Etude de cas: Bassin versant de la riviere Manicouagan

NASA Astrophysics Data System (ADS)

Haguma, Didier

Il est dorenavant etabli que les changements climatiques auront des repercussions sur les ressources en eau. La situation est preoccupante pour le secteur de production d'energie hydroelectrique, car l'eau constitue le moteur pour generer cette forme d'energie. Il sera important d'adapter les regles de gestion et/ou les installations des systemes hydriques, afin de minimiser les impacts negatifs et/ou pour capitaliser sur les retombees positives que les changements climatiques pourront apporter. Les travaux de la presente recherche s'interessent au developpement d'une methode de gestion des systemes hydriques qui tient compte des projections climatiques pour mieux anticiper les impacts de l'evolution du climat sur la production d'hydroelectricite et d'etablir des strategies d'adaptation aux changements climatiques. Le domaine d'etude est le bassin versant de la riviere Manicouagan situe dans la partie centrale du Quebec. Une nouvelle approche d'optimisation des ressources hydriques dans le contexte des changements climatiques est proposee. L'approche traite le probleme de la saisonnalite et de la non-stationnarite du climat d'une maniere explicite pour representer l'incertitude rattachee a un ensemble des projections climatiques. Cette approche permet d'integrer les projections climatiques dans le probleme d'optimisation des ressources en eau pour une gestion a long terme des systemes hydriques et de developper des strategies d'adaptation de ces systemes aux changements climatiques. Les resultats montrent que les impacts des changements climatiques sur le regime hydrologique du bassin de la riviere Manicouagan seraient le devancement et l'attenuation de la crue printaniere et l'augmentation du volume annuel d'apports. L'adaptation des regles de gestion du systeme hydrique engendrerait une hausse de la production hydroelectrique. Neanmoins, une perte de la performance des installations existantes du systeme hydrique serait observee a cause de l'augmentation des deversements non productibles dans le climat futur. Des strategies d'adaptation structurale ont ete analysees pour augmenter la capacite de production et la capacite d'ecoulement de certaines centrales hydroelectriques afin d'ameliorer la performance du systeme. Une analyse economique a permis de choisir les meilleures mesures d'adaptation et de determiner le moment opportun pour la mise en oeuvre de ces mesures. Les resultats de la recherche offrent aux gestionnaires des systemes hydriques un outil qui permet de mieux anticiper les consequences des changements climatiques sur la production hydroelectrique, incluant le rendement de centrales, les deversements non productibles et le moment le plus opportun pour inclure des modifications aux systemes hydriques. Mots-cles : systemes hydriques, adaptation aux changements climatiques, riviere Manicouagan

Inhibition of DES-induced DNA adducts by diallyl sulfide: implications in liver cancer prevention.

PubMed

Green, Mario; Thomas, Ronald; Gued, Lisa; Sadrud-Din, Sakeenah

2003-01-01

Diethylstilbesterol (DES) is known to cause cancer in humans and animals. Diallyl sulfide (DAS), a component of garlic, has been shown to prevent various types of cancer, presumably via metabolic modulation. Previously, we have demonstrated that DAS prevents the oxidation and reduction of DES in vitro. We hypothesize that DAS will inhibit the metabolism of DES in vivo thus preventing the formation of DES-induced DNA adducts. To test this hypothesis, five groups of five male Sprague-Dawley rats were treated as follows: the control received 0.5 ml of corn oil daily for four days. The second group received 50 mg/kg DAS daily for four days. The third group received 50 mg/kg DAS daily for four days followed by 150 mg/kg DES on day five. The fourth group received 400 mg/kg DAS on day five followed by 150 mg/kg DES. The fifth group received 150 mg/kg DES on day five. All of the rats were sacrificed on day five, 4 h after DES treatment. DNA was isolated from the liver and analyzed by 32P-post-labeling for DNA adducts. The in vitro study was performed utilizing four reactions described as follows: the control reaction contained 200 microg DNA, microsomes (346 microg protein/ml), and 10 mM DES; no oxidation co-factor (cumen hydroperoxide) was added. The second reaction, a complete oxidation system, contained 200 microg DNA, microsomes (346 microg protein/ml), 30 mM cumen hydroperoxide, and 10 mM DES. The third reaction contained 200 microg DNA, microsomes (346 microg protein/ml), 30 mM cumen hydroperoxide, 50 mM DAS, and 10 mM DES. The fourth reaction contained 200 microg DNA, microsomes (346 microg protein/ml), 30 mM cumen hydroperoxide, 100 mM DAS, and 10 mM DES. All of the in vitro reactions were buffered with 100 mM KPO4 pH 7.4 and incubated for 30 min at 37 degrees C. DNA was extracted and analyzed by 32P-post-labeling. We found that DAS inhibited the formation of DES-induced DNA adducts in a dose-dependent fashion. We have shown that DES-induced DNA adducts were inhibited in rats that received DAS pre-treatment and co-treatment with DES. These results suggest that DAS directly inhibits the metabolism of DES thus preventing the formation of DNA adducts. In addition to directly inhibiting the metabolism of DES, DAS appears to alter the expression of the metabolic machinery such that DES-induced adducts are inhibited. The inhibition of DES-induced DNA adducts by DAS may prevent the initiation of estrogen-induced cancer.

Mouse hypospadias: A critical examination and definition

PubMed Central

Sinclair, Adriane Watkins; Cao, Mei; Shen, Joel; Cooke, Paul; Risbridger, Gail; Baskin, Laurence; Cunha, Gerald R.

2016-01-01

Hypospadias is a common malformation whose etiology is based upon perturbation of normal penile development. The mouse has been previously used as a model of hypospadias, despite an unacceptably wide range of definitions for this malformation. The current paper presents objective criteria and a definition of mouse hypospadias. Accordingly, diethylstilbestrol (DES) induced penile malformations were examined at 60 days postnatal (P60) in mice treated with DES over the age range of 12 days embryonic to 20 days postnatal (E12 to P20). DES-induced hypospadias involves malformation of the urethral meatus, which is most severe in DES E12-P10, DES P0-P10 and DES P5-P15 groups and less so or absent in the other treatment groups. A frenulum-like ventral tether between the penis and the prepuce was seen in the most severely affected DES-treated mice. Internal penile morphology was also altered in the DES E12-P10, DES P0-P10 and DES P5-P15 groups (with little effect in the other DES treatment groups). Thus, adverse effects of DES are a function of the period of DES treatment and most severe in the P0 to P10 period. In “estrogen mutant mice” (NERKI, βERKO, αERKO and AROM+) hypospadias was only seen in AROM+ male mice having genetically-engineered elevation is serum estrogen. Significantly, mouse hypospadias was only seen distally at and near the urethral meatus where epithelial fusion events are known to take place and never in the penile midshaft, where urethral formation occurs via an entirely different morphogenetic process. PMID:27068029

Caracterisation des proprietes dielectriques de materiaux composites a base de polyethylene terephtalate recycle =

NASA Astrophysics Data System (ADS)

Mebarki, Fouzia

Cette etude vise a etudier la possibilite d'utiliser des materiaux composites a matrice thermoplastique pour des applications electriques comme les supports des systemes d'allumage dans les moteurs d'automobile. Nous nous interessons plus particulierement aux composites a base de polyethylene terephtalate (PET) recycle. Les isolants classiques comme le PET ne peuvent pas satisfaire toutes les exigences. L'introduction des renforts comme les fibres de verre et le mica peuvent ameliorer les caracteristiques mecaniques de ces materiaux. Toutefois, cette amelioration peut etre accompagnee d'une diminution des proprietes electriques surtout que ces materiaux doivent operer sous contraintes thermiques et electriques tres severes. Afin d'estimer la duree de vie de ces isolants, des essais de vieillissement accelere ont ete effectues a une frequence de 300Hz dans une plage de temperature allant de la temperature ambiante a 140°C. L'etude a haute temperature permettra de determiner la temperature de service des materiaux candidats. Des essais de la rupture dielectrique ont ete realises sur un grand nombre d'echantillon selon la norme ASTM D-149 relative aux mesures de rigidite dielectrique des isolants solides. Ces tests ont permis de deceler les echantillons problematiques et de verifier la qualite de ces isolants solides. Les differentes connaissances acquises lors de cette analyse ont servi a predire les performances des materiaux en service et vont permettre a la compagnie Groupe Lavergne d'apporter des ameliorations au niveau des formulations existantes et par la suite developper un materiau ayant les proprietes electriques et thermiques adequates pour ce type d'application. None None None None

[Not Available].

PubMed

Belmir, R; Fejjal, N; El Omari, M; El Mazouz, S; Gharib, N; Abassi, A; Belmahi, A

2008-09-30

Les accidents électriques par haute tension (AEHT) provoquent des brûlures profondes par effet Joule le long des axes vasculo-nerveux entre les points d'entrée et de sortie, qui sont le siège de lésions délabrantes. Les Auteurs rapportent une série de dix cas d'AEHT admis au service de chirurgie réparatrice et de brûlés de l'Hôpital Ibn Sina de Rabat à travers laquelle ils étudient les caractéristiques épidémiologiques, cliniques et thérapeutiques. Tous les patients étaient des adultes de sexe masculin dont l'âge moyen était de 31 ans. Dans 70% des cas, ces brûlures étaient secondaires à un contact avec les distributeurs d'électricité avec une surface brûlée inférieure à 20%. Le traitement des lésions électrothermiques a nécessité des interventions itératives avec amputation des segments de membres nécrosés dans 70% des cas, dont les suites étaient marquées par des séquelles fonctionnelles invalidantes. La prévention des AEHT, en particulier pour les accidents du travail au sein des professions exposées, reste fondamentale.

Diethylstilbestrol (DES) and Cancer

MedlinePlus

... Genetics Services Directory Cancer Prevention Overview Research Diethylstilbestrol (DES) and Cancer On This Page What is DES? ... outlined in the table below. Fertility Problems in DES Daughters ( 7 ) Fertility Complication Hazard Ratio Percent Cumulative ...

Des recommandations probantes pour surveiller l’innocuité des antipsychotiques de deuxième génération chez les enfants et les adolescents

PubMed Central

Pringsheim, Tamara; Panagiotopoulos, Constadina; Davidson, Jana; Ho, Josephine

2012-01-01

HISTORIQUE : Au Canada, l’utilisation d’antipsychotiques, notamment les antipsychotiques de deuxième génération (ADG), a augmenté de façon considérable depuis cinq ans chez les enfants ayant des troubles de santé mentale. Ces médicaments ont le potentiel de causer de graves complications métaboliques et neurologiques lorsqu’on les utilise de manière chronique. OBJECTIF : Synthétiser les données probantes relatives aux effets secondaires métaboliques et neurologiques précis associés à l’usage d’ADG chez les enfants et fournir des recommandations probantes sur la surveillance de ces effets secondaires. MÉTHODOLOGIE : Les auteurs ont procédé à une analyse systématique des essais cliniques contrôlés des ADG auprès d’enfants. Ils ont fait des recommandations à l’égard de la surveillance de l’innocuité des ADG d’après un modèle de classification fondé sur le système GRADE (système de notation de l’évaluation et de l’élaboration des recommandations). Lorsque les données probantes n’étaient pas suffisantes, ils fondaient leurs recommandations sur le consensus et l’avis d’experts. Un groupe consensuel multidisciplinaire a analysé toutes les données probantes pertinentes et est parvenu à un consensus à l’égard des recommandations. RÉSULTATS : Les recommandations probantes portant sur la surveillance de l’innocuité des ADG figurent dans les présentes lignes directrices. Les auteurs indiquent la qualité des recommandations relatives à des examens physiques et tests de laboratoire précis à l’égard de chaque ADG à des moments déterminés. CONCLUSION : De multiples essais aléatoires et contrôlés ont permis d’évaluer l’efficacité de bon nombre des ADG utilisés pour traiter les troubles de santé mentale en pédiatrie. Toutefois, leurs avantages ne sont pas sans risques : on observe à la fois des effets secondaires métaboliques et neurologiques chez les enfants traités au moyen d’ADG. Le risque de prise de poids, d’augmentation de l’indice de masse corporelle et de taux lipidiques anormaux est plus élevé à l’utilisation d’olanzapine, suivie de la clozapine et de la quétiapine. Quant au risque d’effets secondaires neurologiques des traitements, il est plus élevé à l’utilisation de rispéridone, d’olanzapine et d’aripiprazole. Des interventions de surveillance pertinentes des effets secondaires amélioreront la qualité des soins des enfants traités à l’aide de ces médicaments. PMID:24082813

Relations de Dispersion et Diffusion des Glueballs et des Mesons dans la Theorie de Jauge U(1)(2+1) Compacte

NASA Astrophysics Data System (ADS)

Ahmed, Chaara El Mouez

Nous avons etudie les relations de dispersion et la diffusion des glueballs et des mesons dans le modele U(1)_{2+1} compact. Ce modele a ete souvent utilise comme un simple modele de la chromodynamique quantique (QCD), parce qu'il possede le confinement ainsi que les etats de glueballs. Par contre, sa structure mathematique est beaucoup plus simple que la QCD. Notre methode consiste a diagonaliser l'Hamiltonien de ce modele dans une base appropriee de graphes et sur reseau impulsion, afin de generer les relations de dispersion des glueballs et des mesons. Pour la diffusion, nous avons utilise la methode dependante du temps pour calculer la matrice S et la section efficace de diffusion des glueballs et des mesons. Les divers resultats obtenus semblent etre en accord avec les travaux anterieurs de Hakim, Alessandrini et al., Irving et al., qui eux, utilisent plutot la theorie des perturbations en couplage fort, et travaillent sur un reseau espace-temps.

[Isolation, identification and characterization of a diethylstilbestrol-degrading bacterial strain Serratia sp].

PubMed

Xu, Ran-Fang; Sun, Min-Xia; Liu, Juan; Wang, Hong; Li, Xin; Zhu, Xue-Zhu; Ling, Wan-Ting

2014-08-01

Utilizing the diethylstilbestrol (DES)-degrading bacteria to biodegrade DES is a most reliable technique for cleanup of DES pollutants from the environment. However, little information is available heretofore on the isolation of DES-degrading bacteria and their DES removal performance in the environment. A novel bacterium capable of degrading DES was isolated from the activated sludge of a wastewater treatment plant. According to its morphology, physiochemical characteristics, and 16S rDNA sequence analysis, this strain was identified as Serratia sp.. The strain was an aerobic bacterium, and it could degrade 68.3% of DES (50 mg x L(-1)) after culturing for 7 days at 30 degrees C, 150 r x min(-1) in shaking flasks. The optimal conditions for DES biodegradation by the obtained strain were 30 degrees C, 40-60 mg x L(-1) DES, pH 7.0, 5% of inoculation volume, 0 g x L(-1) of added NaCl, and 10 mL of liquid medium volume in 100 mL flask.

Les bons conseils de la naissance à la maternelle

PubMed Central

Rourke, Leslie; Leduc, Denis; Constantin, Evelyn; Carsley, Sarah; Rourke, James; Li, Patricia

2013-01-01

Résumé Objectif Donner un aperçu de la version 2011 du Relevé postnatal Rourke (RPR), qui comporte aussi des nouveautés dans son site web et de nouvelles initiatives connexes et qui intègre les données des ouvrages scientifiques récents sur les soins de santé préventifs à l’intention des enfants de 0 à 5 ans. Qualité des données À l’instar des versions antérieures du RPR, la nouvelle édition présente des recommandations identifiées comme se fondant sur des preuves suffisantes, acceptables ou consensuelles, selon les classifications adoptées par le Groupe d’étude canadien sur les soins de santé préventifs en 2011. Message principal De nouveaux renseignements et des recommandations sont présentés concernant la surveillance de la croissance, la nutrition et la vaccination contre la varicelle, les pneumocoques, les méningocoques et le rotavirus. Il y a maintenant de bonnes données probantes en faveur de l’adaptation canadienne des courbes de croissance de l’Organisation mondiale de la Santé, du dépistage universel des problèmes d’audition chez le nouveau-né et du recours à des stratégies de réduction de la douleur liée à la vaccination. On a mis à jour les conseils anticipatoires concernant la sécurité durant le sommeil, la supervision de la santé des enfants en foyer d’accueil, le trouble du spectre de l’alcoolisation fœtale, les facteurs de risque nécessitant le dépistage du plomb et de l’anémie, les soins dentaires et la santé buccale. Parmi les nouvelles rubriques dans le site web du RPR, on peut mentionner une section présentant des ressources pour les parents, des modifications à l’intention de populations particulières, comme les personnes vivant au Nunavut, une version du RPR qui met en évidence en un coup d’œil les modifications à la version de 2009 et une expansion de la fonction d’exploration du RPR accompagnée des hyperliens connexes menant aux renseignements pertinents. On peut aussi avoir accès au RPR sous forme d’une page par visite. Le Collège des médecins de famille du Canada et la Société canadienne de pédiatrie ont donné leur aval au RPR de 2011. Les versions nationale et ontarienne sont disponibles en français et en anglais. Conclusion Le RPR de 2011 est un outil pratique, mis à jour, fondé sur des données probantes de transposition du savoir concernant les soins de santé préventifs aux enfants de la naissance à l’âge de 5 ans. Il propose des ressources exhaustives dans le web à l’intention des professionnels de la santé, des étudiants, des résidents et des parents.

Controle optique de qubits lies a des centres isoelectroniques d'azote dans le GaAs

NASA Astrophysics Data System (ADS)

Ethier-Majcher, Gabriel

Le traitement de l'information quantique est un domaine de recherche actuellement en pleine effervescence car il laisse entrevoir une revolution dans notre facon de traiter et d'echanger de l'information. D'une part, l'ordinateur quantique promet de resoudre des problemes comme la factorisation d'un polynome de facon beaucoup plus efficace qu'un ordinateur classique. D'autre part, les communications quantiques promettent l'echange d'information de facon fondamentalement inviolable. Afin de tirer pleinement profit de ces nouvelles technologies, il sera avantageux de construire des reseaux quantiques. Dans un tel reseau, des processeurs quantiques, les noeuds, seront connectes par des photons voyageant dans des fibres optiques. Les reseaux quantiques permettront de deployer les communications quantiques a grande echelle et de creer des super-ordinateurs quantiques. La realisation de reseaux quantiques necessitera des interfaces optiques pouvant echanger l'information de facon coherente entre un qubit (bit d'information quantique) et un photon. L'implementation de telles interfaces dans un systeme physique s'avere un important defi scientifique et technologique. Or, les systemes actuellement envisages a cette fin souffrent d'un faible couplage avec la lumiere ou encore de grandes inhomogeneites, constituant des obstacles a la realisation de reseaux a grande echelle. Dans cette these, le potentiel des centres isoelectroniques pour realiser des interfaces optiques est evalue. Deux types de qubits lies a des paires d'azote dans le GaAs sont consideres : les qubits excitoniques et les qubits de spin electronique, controlables par l'intermediaire d'excitons charges. Le controle optique complet des qubits excitoniques est demontre, ce qui constitue la premiere realisation du genre dans les centres isoelectroniques. L'observation d'excitons charges dans ce systeme, liant a la fois des trous lourds et des trous legers, laisse entrevoir de nouvelles possibilites afin de manipuler des spins electroniques. Les excitons et excitons charges lies aux paires d'azote sont etudies par la photoluminescence resolue spatialement. Le controle des qubits excitoniques est realisee a l'aide d'impulsions laser resonantes avec un etat excitonique et l'etat du qubit est lu par sa fluorescence en resonance. Une experience de rotations de Rabi est realisee pour demontrer un controle sur la population du qubit. Cette experience permet d'extraire un moment dipolaire moyen de 27 D pour l'exciton.

Caracterisation des proprietes acoustiques des materiaux poreux a cellules ouvertes et a matrice rigide ou souple

NASA Astrophysics Data System (ADS)

Salissou, Yacoubou

L'objectif global vise par les travaux de cette these est d'ameliorer la caracterisation des proprietes macroscopiques des materiaux poreux a structure rigide ou souple par des approches inverses et indirectes basees sur des mesures acoustiques faites en tube d'impedance. La precision des approches inverses et indirectes utilisees aujourd'hui est principalement limitee par la qualite des mesures acoustiques obtenues en tube d'impedance. En consequence, cette these se penche sur quatre problemes qui aideront a l'atteinte de l'objectif global precite. Le premier probleme porte sur une caracterisation precise de la porosite ouverte des materiaux poreux. Cette propriete en est une de passage permettant de lier la mesure des proprietes dynamiques acoustiques d'un materiau poreux aux proprietes effectives de sa phase fluide decrite par les modeles semi-phenomenologiques. Le deuxieme probleme traite de l'hypothese de symetrie des materiaux poreux selon leur epaisseur ou un index et un critere sont proposes pour quantifier l'asymetrie d'un materiau. Cette hypothese est souvent source d'imprecision des methodes de caracterisation inverses et indirectes en tube d'impedance. Le critere d'asymetrie propose permet ainsi de s'assurer de l'applicabilite et de la precision de ces methodes pour un materiau donne. Le troisieme probleme vise a mieux comprendre le probleme de transmission sonore en tube d'impedance en presentant pour la premiere fois un developpement exact du probleme par decomposition d'ondes. Ce developpement permet d'etablir clairement les limites des nombreuses methodes existantes basees sur des tubes de transmission a 2, 3 ou 4 microphones. La meilleure comprehension de ce probleme de transmission est importante puisque c'est par ce type de mesures que des methodes permettent d'extraire successivement la matrice de transfert d'un materiau poreux et ses proprietes dynamiques intrinseques comme son impedance caracteristique et son nombre d'onde complexe. Enfin, le quatrieme probleme porte sur le developpement d'une nouvelle methode de transmission exacte a 3 microphones applicable a des materiaux ou systemes symetriques ou non. Dans le cas symetrique, on montre que cette approche permet une nette amelioration de la caracterisation des proprietes dynamiques intrinseques d'un materiau. Mots cles. materiaux poreux, tube d'impedance, transmission sonore, absorption sonore, impedance acoustique, symetrie, porosite, matrice de transfert.

Dissociation in bipolar disorder: Relationships between clinical variables and childhood trauma.

PubMed

Hariri, Aytül Gursu; Gulec, Medine Yazici; Orengul, Fatma Fariha Cengiz; Sumbul, Esra Aydin; Elbay, Rumeysa Yeni; Gulec, Huseyin

2015-09-15

The dissociative experiences of patients with bipolar disorder (BD) differ from those of patients with other psychiatric disorders with regard to certain features. The primary goal of this study was to evaluate the relationship between the clinical variables of BD and childhood trauma using the factor structure, psychometric features, and potential subdimensions of the Dissociative Experience Scale (DES). This study included 200 BD patients who were in a remission period and 50 healthy volunteers. The BD patients were recruited from two psychiatry clinic departments in Turkey. The sociodemographic data of the two groups and their scores on the DES and Childhood Trauma Questionnaire (CTQ)-28 were compared. The overall DES scores and the scores for each DES item accurately and reliably measured dissociation in the BD patients (item-total correlation r scores: >0.20, Cronbach's alpha: 0.95), and a factor analysis revealed two subdimensions of the DES for BD: identity confusion/alteration (SubDES-1) and amnesia and depersonalization/derealization (SubDES-2). Although age at onset of BD was significantly correlated with both subdimensions, illness duration was significantly correlated only with the SubDES-2. Of all the subjects, 19.5% (39/200 patients) were identified as having dissociative experiences by the DES-Taxon (DES-T), and subjects in this subscale (DES-T-positive) had significantly higher total scores on the CTQ-28 as well as higher scores on each subgroup of this scale. The highest CTQ-28 subgroup score was emotional neglect, which was followed by emotional abuse and physical neglect and then sexual abuse and physical abuse. There was a significant correlation between total scores on the CTQ-28 and SubDES-2 but none of the CTQ-28 subscale scores was significantly correlated with either SubDES-1 or SubDES-2. The DES sufficiently and reliably identified the experience of dissociative symptoms on the part of BD patients, and a factor analysis revealed two subdimensions of BD on this scale. In particular, DES-T-positive subjects experienced a greater amount of childhood trauma and, as a result, had an earlier age at onset of BD. Additionally, SubDES-2, which was associated with amnesia and depersonalization/derealization, was closely related to illness duration. Copyright © 2015 Elsevier B.V. All rights reserved.

Distribution of stable isotopes in arid storms . II. A double-component model of kinematic wave flow and transport

NASA Astrophysics Data System (ADS)

Yakirevich, Alexander; Dody, Avraham; Adar, Eilon M.; Borisov, Viacheslav; Geyh, Mebus

A new mathematical method based on a double-component model of kinematic wave flow and approach assesses the dynamic isotopic distribution in arid rain storms and runoff. This model describes the transport and δ18O evolution of rainfall to overland flow and runoff in an arid rocky watershed with uniformly distributed shallow depression storage. The problem was solved numerically. The model was calibrated using a set of temporal discharge and δ18O distribution data for rainfall and runoff collected on a small rocky watershed at the Sede Boker Experimental Site, Israel. Simulation of a reliable result with respect to observation was obtained after parameter adjustment by trial and error. Sensitivity analysis and model application were performed. The model is sensitive to changes in parameters characterizing the depression storage zones. The model reflects the effect of the isotopic memory in the water within the depression storage between sequential rain spells. The use of the double-component model of kinematic wave flow and transport provides an appropriate qualitative and quantitative fitting between computed and observed δ18O distribution in runoff. RésuméUne nouvelle méthode mathématique basée sur un modèle à double composante d'écoulement et de transport par une onde cinématique a été développée pour évaluer la distribution dynamique en isotopes dans les précipitations et dans l'écoulement en région aride. Ce modèle décrit le transport et les variations des δ18O de la pluie vers le ruissellement et l'écoulement de surface dans un bassin aride rocheux où le stockage se fait dans des dépressions peu profondes uniformément réparties. Le problème a été résolu numériquement. Le modèle a été calibré au moyen d'une chronique de débits et d'une distribution des δ18O dans la pluie et dans l'écoulement de surface sur un petit bassin versant rocheux du site expérimental de Sede Boker (Israël). La simulation d'un résultat crédible par rapport aux observations a été obtenu après un ajustement des paramètres par une méthode d'essais et d'erreurs. L'analyse de sensibilité et l'application du modèle ont ensuite été réalisés. Le modèle est plutôt sensible aux changements des paramètres caractérisant les zones de stockage dans les dépressions. Le modèle rend compte de l'effet de mémoire isotopique dans l'eau dans le stockage des dépressions entre les événements séquentiels de pluie. L'utilisation d'un modèle à double composante d'écoulement et de transport par onde cinématique permet un ajustement qualitatif et quantitatif adapté entre les distributions des δ18O calculées et observées dans l'écoulement de surface. Resumen Un nuevo método matemático basado en un modelo de doble componente de onda cinemática de flujo y transporte permite caracterizar la distribución isotópica dinámica de las tormentas en zonas áridas y la escorrentía. Este modelo describe el transporte y la evolución del δ18O en la lluvia, flujo superficial y escorrentía en una cuenca rocosa de clima árido con detención superficial distribuida uniformemente. El modelo se calibró numéricamente utilizando un conjunto de datos de descarga temporal y de distribución de δ18O para lluvia y escorrentía recogida en una pequeña cuenca rocosa en el Centro de Experimentación de Sede Boker, Israel. Se obtuvo un buen ajuste a los datos tras un ajuste de parámetros mediante prueba y error. Se realizó un análisis de sensibilidad que indicó que el modelo resulta ser bastante sensible a cambios en los parámetros que caracterizan las zonas de baja detención superficial. El modelo también refleja el efecto de la memoria isotópica en el agua de estas zonas de detención entre los distintos periodos de lluvias. El uso de un modelo de doble componente de onda cinemática de flujo y transporte proporciona un buen ajuste cualitativo y cuantitativo entre los datos medidos y calculados de δ18O en la escorrentía.

Developpement d'un modele analytique pour l'analyse en elasticite lineaire de champs de deformation et contrainte au sein d'un polycristal. comparaison avec la methode des elements finis =

NASA Astrophysics Data System (ADS)

Bretin, Remy

L'endommagement par fatigue des materiaux est un probleme courant dans de nombreux domaines, dont celui de l'aeronautique. Afin de prevenir la rupture par fatigue des materiaux il est necessaire de determiner leur duree de vie en fatigue. Malheureusement, dues aux nombreuses heterogeneites presentes, la duree de vie en fatigue peut fortement varier entre deux pieces identiques faites dans le meme materiau ayant subi les memes traitements. Il est donc necessaire de considerer ces heterogeneites dans nos modeles afin d'avoir une meilleure estimation de la duree de vie des materiaux. Comme premiere etape vers une meilleure consideration des heterogeneites dans nos modeles, une etude en elasticite lineaire de l'influence des orientations cristallographiques sur les champs de deformations et de contraintes dans un polycristal a ete realisee a l'aide de la methode des elements finis. Des correlations ont pu etre etablies a partir des resultats obtenus, et un modele analytique en elasticite lineaire prenant en compte les distributions d'orientations cristallographiques et les effets de voisinage a pu etre developpe. Ce modele repose sur les bases des modeles d'homogeneisation classique, comme le schema auto-coherent, et reprend aussi les principes de voisinage des automates cellulaires. En prenant pour reference les resultats des analyses elements finis, le modele analytique ici developpe a montre avoir une precision deux fois plus grande que le modele auto-coherent, quel que soit le materiau etudie.

Contribution a l'etude et au developpement de nouvelles poudres de fonte

NASA Astrophysics Data System (ADS)

Boisvert, Mathieu

L'obtention de graphite libre dans des pieces fabriquees par metallurgie des poudres (M/P) est un defi auquel plusieurs chercheurs se sont attardes. En effet, la presence de graphite apres frittage ameliore l'usinabilite des pieces, permettant donc de reduire les couts de production, et peut aussi engendrer une amelioration des proprietes tribologiques. L'approche utilisee dans cette these pour tenter d'obtenir du graphite libre apres frittage est par l'utilisation de nouvelles poudres de fontes atomisees a l'eau. L'atomisation a l'eau etant un procede de production de poudres relativement peu couteux qui permet de grandes capacites de production, le transfert des decouvertes de ce doctorat vers des applications industrielles sera donc economiquement plus favorable. En plus de l'objectif d'obtenir du graphite libre apres frittage, un autre aspect important des travaux est le controle de la morphologie du graphite libre apres frittage. En effet, il est connu dans la litterature des fontes coulees/moulees que la morphologie du graphite influencera les proprietes des fontes, ce qui est aussi vrai pour les pieces de M/P. Les fontes ductiles, pour lesquelles le graphite est sous forme de nodules spheroidaux isoles les uns des autres, possedent des proprietes mecaniques superieures aux fontes grises pour lesquelles le graphite est sous forme lamellaire et continu dans la matrice. Les resultats presentes dans cette these montrent qu'il est possible, dans des melanges contenant des poudres de fontes, d'avoir un controle sur la morphologie du graphite et donc sur les proprietes des pieces. Le controle de la morphologie du graphite a principalement ete realise par le type de frittage et le phenomene de diffusion " uphill " du carbone cause par des gradients en silicium. En effet, pour les frittages en phase solide, tous les nodules de graphite sont presents a l'interieur des grains de poudre apres frittage. Pour les frittages en phase liquide, l'intensite de la diffusion " uphill " permet de conserver plus ou moins de graphite nodulaire a l'interieur des regions riches en silicium, alors que le reste du graphite precipite sous forme lamellaire/vermiculaire dans les regions interparticulaires. L'etude des poudres de fontes et la recherche des mecanismes regissant la morphologie du graphite dans les fontes coulees/moulees nous ont amenes a produire des poudres de fontes traitees au magnesium avant l'atomisation. Plusieurs resultats fondamentaux ont ete obtenus de la caracterisation des poudres traitees au magnesium et de leur comparaison avec des poudres de chimies similaires non traitees au magnesium. D'abord, il a ete possible d'observer des bifilms d'oxyde de silicium dans la structure du graphite primaire d'une poudre de fonte grise hypereutectique. Il s'agit des premieres images montrant la structure double de ces defauts, venant ainsi appuyer la theorie elaboree par le professeur John Campbell. Ensuite, il a ete montre que le traitement au magnesium forme une atmosphere protectrice gazeuse autogeneree qui empeche l'oxydation de la surface du bain liquide et donc, la formation et l'entrainement des bifilms. Le role du magnesium sur la morphologie du graphite est de diminuer le soufre en solution en formant des precipites de sulfure de magnesium et ainsi d'augmenter l'energie d'interface graphite-liquide. En reponse a cette grande energie d'interface graphite-liquide, le graphite cherche a minimiser son ratio surface/volume, ce qui favorise la formation de graphite spheroidal. De plus, deux types de germination ont ete observes dans la poudre de fonte hypereutectique traitee au magnesium. Le premier type est une germination heterogene sur un nombre limite de particules faites de magnesium, d'aluminium, de silicium et d'oxygene. Le deuxieme type est une germination homogene des nodules dans certaines regions du liquide plus riches en silicium. L'observation du centre reel tridimensionnel, en microscopie electronique en transmission en haute resolution, d'un des nodules ayant subi une germination homogene a permis de confirmer que le mode de croissance du graphite spheroidal se produit selon le modele de la croissance en feuille de chou. (Abstract shortened by ProQuest.).