Bayesian Estimates of Autocorrelations in Single-Case Designs

ERIC Educational Resources Information Center

Shadish, William R.; Rindskopf, David M.; Hedges, Larry V.; Sullivan, Kristynn J.

2012-01-01

Researchers in the single-case design tradition have debated the size and importance of the observed autocorrelations in those designs. All of the past estimates of the autocorrelation in that literature have taken the observed autocorrelation estimates as the data to be used in the debate. However, estimates of the autocorrelation are subject to…

Self-Management for Primary School Students Demonstrating Problem Behavior in Regular Classrooms: Evidence Review of Single-Case Design Research

ERIC Educational Resources Information Center

Busacca, Margherita L.; Anderson, Angelika; Moore, Dennis W.

2015-01-01

This review evaluates self-management literature targeting problem behaviors of primary school students in general education settings. Thirty-one single-case design studies met inclusion criteria, of which 16 demonstrated adequate methodological rigor, according to What Works Clearinghouse (WWC) design standards. Visual analysis and WWC…

Modeling Longitudinal Data with Generalized Additive Models: Applications to Single-Case Designs

ERIC Educational Resources Information Center

Sullivan, Kristynn J.; Shadish, William R.

2013-01-01

Single case designs (SCDs) are short time series that assess intervention effects by measuring units repeatedly over time both in the presence and absence of treatment. For a variety of reasons, interest in the statistical analysis and meta-analysis of these designs has been growing in recent years. This paper proposes modeling SCD data with…

Single-Case Experimental Designs to Evaluate Novel Technology-Based Health Interventions

PubMed Central

Cassidy, Rachel N; Raiff, Bethany R

2013-01-01

Technology-based interventions to promote health are expanding rapidly. Assessing the preliminary efficacy of these interventions can be achieved by employing single-case experiments (sometimes referred to as n-of-1 studies). Although single-case experiments are often misunderstood, they offer excellent solutions to address the challenges associated with testing new technology-based interventions. This paper provides an introduction to single-case techniques and highlights advances in developing and evaluating single-case experiments, which help ensure that treatment outcomes are reliable, replicable, and generalizable. These advances include quality control standards, heuristics to guide visual analysis of time-series data, effect size calculations, and statistical analyses. They also include experimental designs to isolate the active elements in a treatment package and to assess the mechanisms of behavior change. The paper concludes with a discussion of issues related to the generality of findings derived from single-case research and how generality can be established through replication and through analysis of behavioral mechanisms. PMID:23399668

An Improved Rank Correlation Effect Size Statistic for Single-Case Designs: Baseline Corrected Tau.

PubMed

Tarlow, Kevin R

2017-07-01

Measuring treatment effects when an individual's pretreatment performance is improving poses a challenge for single-case experimental designs. It may be difficult to determine whether improvement is due to the treatment or due to the preexisting baseline trend. Tau- U is a popular single-case effect size statistic that purports to control for baseline trend. However, despite its strengths, Tau- U has substantial limitations: Its values are inflated and not bound between -1 and +1, it cannot be visually graphed, and its relatively weak method of trend control leads to unacceptable levels of Type I error wherein ineffective treatments appear effective. An improved effect size statistic based on rank correlation and robust regression, Baseline Corrected Tau, is proposed and field-tested with both published and simulated single-case time series. A web-based calculator for Baseline Corrected Tau is also introduced for use by single-case investigators.

Using Data Collection Apps and Single-Case Designs to Research Transformative Learning in Adults

ERIC Educational Resources Information Center

Roessger, Kevin M.; Greenleaf, Arie; Hoggan, Chad

2017-01-01

To overcome situational hurdles when researching transformative learning in adults, we outline a research approach using single-case research designs and smartphone data collection apps. This approach allows researchers to better understand learners' current lived experiences and determine the effects of transformative learning interventions on…

ADHD Symptom Reduction in Elementary Students: A Single-Case Effectiveness Design

ERIC Educational Resources Information Center

Schottelkorb, April A.; Ray, Dee C.

2009-01-01

The authors used a single-case design to examine the effectiveness of child-centered play therapy (CCPT) and person-centered teacher consultation (PCTC) for four elementary students identified with attention deficit hyperactivity disorder (ADHD) symptoms. Two students participated in CCPT and their teachers participated in PCTC. Two students…

Rating the methodological quality of single-subject designs and n-of-1 trials: introducing the Single-Case Experimental Design (SCED) Scale.

PubMed

Tate, Robyn L; McDonald, Skye; Perdices, Michael; Togher, Leanne; Schultz, Regina; Savage, Sharon

2008-08-01

Rating scales that assess methodological quality of clinical trials provide a means to critically appraise the literature. Scales are currently available to rate randomised and non-randomised controlled trials, but there are none that assess single-subject designs. The Single-Case Experimental Design (SCED) Scale was developed for this purpose and evaluated for reliability. Six clinical researchers who were trained and experienced in rating methodological quality of clinical trials developed the scale and participated in reliability studies. The SCED Scale is an 11-item rating scale for single-subject designs, of which 10 items are used to assess methodological quality and use of statistical analysis. The scale was developed and refined over a 3-year period. Content validity was addressed by identifying items to reduce the main sources of bias in single-case methodology as stipulated by authorities in the field, which were empirically tested against 85 published reports. Inter-rater reliability was assessed using a random sample of 20/312 single-subject reports archived in the Psychological Database of Brain Impairment Treatment Efficacy (PsycBITE). Inter-rater reliability for the total score was excellent, both for individual raters (overall ICC = 0.84; 95% confidence interval 0.73-0.92) and for consensus ratings between pairs of raters (overall ICC = 0.88; 95% confidence interval 0.78-0.95). Item reliability was fair to excellent for consensus ratings between pairs of raters (range k = 0.48 to 1.00). The results were replicated with two independent novice raters who were trained in the use of the scale (ICC = 0.88, 95% confidence interval 0.73-0.95). The SCED Scale thus provides a brief and valid evaluation of methodological quality of single-subject designs, with the total score demonstrating excellent inter-rater reliability using both individual and consensus ratings. Items from the scale can also be used as a checklist in the design, reporting and critical appraisal of single-subject designs, thereby assisting to improve standards of single-case methodology.

Single-case experimental design yielded an effect estimate corresponding to a randomized controlled trial.

PubMed

Shadish, William R; Rindskopf, David M; Boyajian, Jonathan G

2016-08-01

We reanalyzed data from a previous randomized crossover design that administered high or low doses of intravenous immunoglobulin (IgG) to 12 patients with hypogammaglobulinaemia over 12 time points, with crossover after time 6. The objective was to see if results corresponded when analyzed as a set of single-case experimental designs vs. as a usual randomized controlled trial (RCT). Two blinded statisticians independently analyzed results. One analyzed the RCT comparing mean outcomes of group A (high dose IgG) to group B (low dose IgG) at the usual trial end point (time 6 in this case). The other analyzed all 12 time points for the group B patients as six single-case experimental designs analyzed together in a Bayesian nonlinear framework. In the randomized trial, group A [M = 794.93; standard deviation (SD) = 90.48] had significantly higher serum IgG levels at time six than group B (M = 283.89; SD = 71.10) (t = 10.88; df = 10; P < 0.001), yielding a mean difference of MD = 511.05 [standard error (SE) = 46.98]. For the single-case experimental designs, the effect from an intrinsically nonlinear regression was also significant and comparable in size with overlapping confidence intervals: MD = 495.00, SE = 54.41, and t = 495.00/54.41 = 9.10. Subsequent exploratory analyses indicated that how trend was modeled made a difference to these conclusions. The results of single-case experimental designs accurately approximated results from an RCT, although more work is needed to understand the conditions under which this holds. Copyright © 2016 Elsevier Inc. All rights reserved.

Response to Intervention: Using Single-Case Design to Examine the Impact of Tier 2 Mathematics Interventions

ERIC Educational Resources Information Center

Valenzuela, Vanessa V.; Gutierrez, Gabriel; Lambros, Katina M.

2014-01-01

An A-B single-case design assessed at-risk students' responsiveness to mathematics interventions. Four culturally and linguistically diverse second-grade students were given a Tier 2 standard protocol mathematics intervention that included number sense instruction, modeling procedures, guided math drill and practice of addition and subtraction…

Single-Case Research Design: An Alternative Strategy for Evidence-Based Practice

ERIC Educational Resources Information Center

Stapleton, Drue; Hawkins, Andrew

2015-01-01

Objective: The trend of utilizing evidence-based practice (EBP) in athletic training is now requiring clinicians, researchers, educators, and students to be equipped to both engage in and make judgments about research evidence. Single-case design (SCD) research may provide an alternative approach to develop such skills and inform clinical and…

School-Based Peer-Related Social Competence Interventions for Children with Autism Spectrum Disorder: A Meta-Analysis and Descriptive Review of Single Case Research Design Studies

ERIC Educational Resources Information Center

Whalon, Kelly J.; Conroy, Maureen A.; Martinez, Jose R.; Werch, Brittany L.

2015-01-01

The purpose of this review was to critically examine and summarize the impact of school-based interventions designed to facilitate the peer-related social competence of children with autism spectrum disorder (ASD). Reviewed studies employed a single-case experimental design, targeted peer-related social competence, included children 3-12 years old…

Single-Subject Evaluation: A Tool for Quality Assurance.

ERIC Educational Resources Information Center

Nuehring, Elane M.; Pascone, Anne B.

1986-01-01

The use of single-subject designs in peer review, in utilization review, and in other quality-assurance audits is encouraged. Presents an overview of the methodologies of single-subject designs and quality assurance, and provides examples of cases in which single-subject techniques furnished relevant quality assurance documentation. (Author/ABB)

Masked Visual Analysis: Minimizing Type I Error in Visually Guided Single-Case Design for Communication Disorders

PubMed Central

Hitchcock, Elaine R.; Ferron, John

2017-01-01

Purpose Single-case experimental designs are widely used to study interventions for communication disorders. Traditionally, single-case experiments follow a response-guided approach, where design decisions during the study are based on participants' observed patterns of behavior. However, this approach has been criticized for its high rate of Type I error. In masked visual analysis (MVA), response-guided decisions are made by a researcher who is blinded to participants' identities and treatment assignments. MVA also makes it possible to conduct a hypothesis test assessing the significance of treatment effects. Method This tutorial describes the principles of MVA, including both how experiments can be set up and how results can be used for hypothesis testing. We then report a case study showing how MVA was deployed in a multiple-baseline across-subjects study investigating treatment for residual errors affecting rhotics. Strengths and weaknesses of MVA are discussed. Conclusions Given their important role in the evidence base that informs clinical decision making, it is critical for single-case experimental studies to be conducted in a way that allows researchers to draw valid inferences. As a method that can increase the rigor of single-case studies while preserving the benefits of a response-guided approach, MVA warrants expanded attention from researchers in communication disorders. PMID:28595354

Masked Visual Analysis: Minimizing Type I Error in Visually Guided Single-Case Design for Communication Disorders.

PubMed

Byun, Tara McAllister; Hitchcock, Elaine R; Ferron, John

2017-06-10

Single-case experimental designs are widely used to study interventions for communication disorders. Traditionally, single-case experiments follow a response-guided approach, where design decisions during the study are based on participants' observed patterns of behavior. However, this approach has been criticized for its high rate of Type I error. In masked visual analysis (MVA), response-guided decisions are made by a researcher who is blinded to participants' identities and treatment assignments. MVA also makes it possible to conduct a hypothesis test assessing the significance of treatment effects. This tutorial describes the principles of MVA, including both how experiments can be set up and how results can be used for hypothesis testing. We then report a case study showing how MVA was deployed in a multiple-baseline across-subjects study investigating treatment for residual errors affecting rhotics. Strengths and weaknesses of MVA are discussed. Given their important role in the evidence base that informs clinical decision making, it is critical for single-case experimental studies to be conducted in a way that allows researchers to draw valid inferences. As a method that can increase the rigor of single-case studies while preserving the benefits of a response-guided approach, MVA warrants expanded attention from researchers in communication disorders.

Using generalized additive (mixed) models to analyze single case designs.

PubMed

Shadish, William R; Zuur, Alain F; Sullivan, Kristynn J

2014-04-01

This article shows how to apply generalized additive models and generalized additive mixed models to single-case design data. These models excel at detecting the functional form between two variables (often called trend), that is, whether trend exists, and if it does, what its shape is (e.g., linear and nonlinear). In many respects, however, these models are also an ideal vehicle for analyzing single-case designs because they can consider level, trend, variability, overlap, immediacy of effect, and phase consistency that single-case design researchers examine when interpreting a functional relation. We show how these models can be implemented in a wide variety of ways to test whether treatment is effective, whether cases differ from each other, whether treatment effects vary over cases, and whether trend varies over cases. We illustrate diagnostic statistics and graphs, and we discuss overdispersion of data in detail, with examples of quasibinomial models for overdispersed data, including how to compute dispersion and quasi-AIC fit indices in generalized additive models. We show how generalized additive mixed models can be used to estimate autoregressive models and random effects and discuss the limitations of the mixed models compared to generalized additive models. We provide extensive annotated syntax for doing all these analyses in the free computer program R. Copyright © 2013 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

75 FR 47284 - Secretary's Priorities for Discretionary Grant Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-05

... the most currently available data. Interrupted time series design \\4\\ means a type of quasi... findings. \\4\\ A single subject or single case design is an adaptation of an interrupted time series design...), interrupted time series designs (as defined in this notice), or regression discontinuity designs (as defined...

A d-statistic for single-case designs that is equivalent to the usual between-groups d-statistic.

PubMed

Shadish, William R; Hedges, Larry V; Pustejovsky, James E; Boyajian, Jonathan G; Sullivan, Kristynn J; Andrade, Alma; Barrientos, Jeannette L

2014-01-01

We describe a standardised mean difference statistic (d) for single-case designs that is equivalent to the usual d in between-groups experiments. We show how it can be used to summarise treatment effects over cases within a study, to do power analyses in planning new studies and grant proposals, and to meta-analyse effects across studies of the same question. We discuss limitations of this d-statistic, and possible remedies to them. Even so, this d-statistic is better founded statistically than other effect size measures for single-case design, and unlike many general linear model approaches such as multilevel modelling or generalised additive models, it produces a standardised effect size that can be integrated over studies with different outcome measures. SPSS macros for both effect size computation and power analysis are available.

Establishing Interventions via a Theory-Driven Single Case Design Research Cycle

ERIC Educational Resources Information Center

Kilgus, Stephen P.; Riley-Tillman, T. Chris; Kratochwill, Thomas R.

2016-01-01

Recent studies have suggested single case design (SCD) intervention research is subject to publication bias, wherein studies are more likely to be published if they possess large or statistically significant effects and use rigorous experimental methods. The nature of SCD and the purposes for which it might be used could suggest that large effects…

Using Single-Case Design and Personalized Behavior Change Projects to Teach Research Methods

ERIC Educational Resources Information Center

Morgan, David L.

2009-01-01

Students in research methods courses, especially those taught in an intense format, might be hard pressed to actually conduct research studies due to logistics and time constraints. I describe the use of single-case research design and a personalized behavior project as an alternative research project for students in an undergraduate psychology…

Meta-Analysis of Single-Case Design Research: Introduction to the Special Issue

ERIC Educational Resources Information Center

Burns, Matthew K.

2012-01-01

Single-case design (SCD) research focuses on finding powerful effects, but the influence of this methodology on the evidence-based practice (EBP) movement is questionable. Meta-analytic procedures may help facilitate the role of SCD research in the EBP movement, but meta-analyses of SCDs are controversial. The current article provides an…

Using Generalized Additive Models to Analyze Single-Case Designs

ERIC Educational Resources Information Center

Shadish, William; Sullivan, Kristynn

2013-01-01

Many analyses for single-case designs (SCDs)--including nearly all the effect size indicators-- currently assume no trend in the data. Regression and multilevel models allow for trend, but usually test only linear trend and have no principled way of knowing if higher order trends should be represented in the model. This paper shows how Generalized…

Meta-Analysis of Single-Case Design Research on Self-Regulatory Interventions for Academic Performance

ERIC Educational Resources Information Center

Perry, Valerie; Albeg, Loren; Tung, Catherine

2012-01-01

The current study examined the effects of self-regulatory interventions on reading, writing, and math by conducting a meta-analysis of single-case design research. Self-regulatory interventions have promise as an effective approach that is both minimally invasive and involves minimal resources. Effects of the interventions were analyzed by…

Publishing Single-Case Research Design Studies That Do Not Demonstrate Experimental Control

ERIC Educational Resources Information Center

Tincani, Matt; Travers, Jason

2018-01-01

Demonstration of experimental control is considered a hallmark of high-quality single-case research design (SCRD). Studies that fail to demonstrate experimental control may not be published because researchers are unwilling to submit these papers for publication and journals are unlikely to publish negative results (i.e., the file drawer effect).…

A Simple Effect Size Estimator for Single Case Designs Using WinBUGS

ERIC Educational Resources Information Center

Rindskopf, David; Shadish, William; Hedges, Larry

2012-01-01

Data from single case designs (SCDs) have traditionally been analyzed by visual inspection rather than statistical models. As a consequence, effect sizes have been of little interest. Lately, some effect-size estimators have been proposed, but most are either (i) nonparametric, and/or (ii) based on an analogy incompatible with effect sizes from…

Single-Case Experimental Designs for the Evaluation of Treatments for Self-Injurious and Suicidal Behaviors

ERIC Educational Resources Information Center

Rizvi, Shireen L.; Nock, Matthew K.

2008-01-01

Single-case experimental designs (SCEDs) provide a time- and cost-effective alternative to randomized clinical trials and offer significant advantages in terms of internal and external validity. A brief history and primer on SCEDs is provided, specifically for use in suicide intervention research. Various SCED methodologies, such as AB, ABAB,…

Applying Quality Indicators to Single-Case Research Designs Used in Special Education: A Systematic Review

ERIC Educational Resources Information Center

Moeller, Jeremy D.; Dattilo, John; Rusch, Frank

2015-01-01

This study examined how specific guidelines and heuristics have been used to identify methodological rigor associated with single-case research designs based on quality indicators developed by Horner et al. Specifically, this article describes how literature reviews have applied Horner et al.'s quality indicators and evidence-based criteria.…

Functional Assessment-Based Interventions for Students with or At-Risk for High-Incidence Disabilities: Field Testing Single-Case Synthesis Methods

ERIC Educational Resources Information Center

Common, Eric Alan; Lane, Kathleen Lynne; Pustejovsky, James E.; Johnson, Austin H.; Johl, Liane Elizabeth

2017-01-01

This systematic review investigated one systematic approach to designing, implementing, and evaluating functional assessment-based interventions (FABI) for use in supporting school-age students with or at-risk for high-incidence disabilities. We field tested several recently developed methods for single-case design syntheses. First, we appraised…

No Randomization? No Problem: Experimental Control and Random Assignment in Single Case Research

ERIC Educational Resources Information Center

Ledford, Jennifer R.

2018-01-01

Randomization of large number of participants to different treatment groups is often not a feasible or preferable way to answer questions of immediate interest to professional practice. Single case designs (SCDs) are a class of research designs that are experimental in nature but require only a few participants, all of whom receive the…

A Simple Effect Size Estimator for Single Case Designs Using WinBUGS

ERIC Educational Resources Information Center

Rindskopf, David; Shadish, William; Hedges, Larry V.

2012-01-01

This conference presentation demonstrates a multilevel model for analyzing single case designs. The model is implemented in the Bayesian program WinBUGS. The authors show how it is possible to estimate a d-statistic like the one in Hedges, Pustejovsky and Shadish (2012) in this program. Results are demonstrated on an example.

Connecting the Space between Design and Research: Explorations in Participatory Research Supervision

ERIC Educational Resources Information Center

Caldwell, Glenda Amayo; Osborne, Lindy; Mewburn, Inger; Nottingham, Anitra

2016-01-01

In this article we offer a single case study using an action research method for gathering and analysing data offering insights valuable to both design and research supervision practice. We do not attempt to generalise from this single case, but offer it as an instance that can improve our understanding of research supervision practice. We…

77 FR 18216 - Applications for New Awards; Investing in Innovation Fund, Scale-Up Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-27

... evaluation and prevents even the appearance of a conflict of interest. Interrupted time series design \\8... findings. \\8\\ A single subject or single case design is an adaptation of an interrupted time series design... matched comparison group designs (as defined in this notice), interrupted time series designs (as defined...

The Single-Case Reporting Guideline In BEhavioural Interventions (SCRIBE) 2016 Statement

PubMed Central

Tate, Robyn L.; Perdices, Michael; Rosenkoetter, Ulrike; Shadish, William; Vohra, Sunita; Barlow, David H.; Horner, Robert; Kazdin, Alan; Kratochwill, Thomas; McDonald, Skye; Sampson, Margaret; Shamseer, Larissa; Togher, Leanne; Albin, Richard; Backman, Catherine; Douglas, Jacinta; Evans, Jonathan J.; Gast, David; Manolov, Rumen; Mitchell, Geoffrey; Nickels, Lyndsey; Nikles, Jane; Ownsworth, Tamara; Rose, Miranda; Schmid, Christopher H.; Wilson, Barbara

2016-01-01

We developed a reporting guideline to provide authors with guidance about what should be reported when writing a paper for publication in a scientific journal using a particular type of research design: the single-case experimental design. This report describes the methods used to develop the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016. As a result of 2 online surveys and a 2-day meeting of experts, the SCRIBE 2016 checklist was developed, which is a set of 26 items that authors need to address when writing about single-case research. This article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated. We recommend that the SCRIBE 2016 is used by authors preparing manuscripts describing single-case research for publication, as well as journal reviewers and editors who are evaluating such manuscripts. PMID:27279674

What Works Clearinghouse Study Review Guide Instructions for Reviewing Single-Case Designs Studies

ERIC Educational Resources Information Center

What Works Clearinghouse, 2016

2016-01-01

This document provides step-by-step instructions on how to complete the Study Review Guide (SRG, Version S3, V2) for single-case designs (SCDs). Reviewers will complete an SRG for every What Works Clearinghouse (WWC) review. A completed SRG should be a reviewer's independent assessment of the study, relative to the criteria specified in the review…

Therapeutic Assessment for Preadolescent Boys with Oppositional Defiant Disorder: A Replicated Single-Case Time-Series Design

ERIC Educational Resources Information Center

Smith, Justin D.; Handler, Leonard; Nash, Michael R.

2010-01-01

The Therapeutic Assessment (TA) model is a relatively new treatment approach that fuses assessment and psychotherapy. The study examines the efficacy of this model with preadolescent boys with oppositional defiant disorder and their families. A replicated single-case time-series design with daily measures is used to assess the effects of TA and to…

A Single Case Design Evaluation of a Software and Tutor Intervention Addressing Emotion Recognition and Social Interaction in Four Boys with ASD

ERIC Educational Resources Information Center

Lacava, Paul G.; Rankin, Ana; Mahlios, Emily; Cook, Katie; Simpson, Richard L.

2010-01-01

Many students with Autism Spectrum Disorders (ASD) have delays learning to recognize emotions. Social behavior is also challenging, including initiating interactions, responding to others, developing peer relationships, and so forth. In this single case design study we investigated the relationship between use of computer software ("Mind Reading:…

Explaining Variance and Identifying Predictors of Children's Communication via a Multilevel Model of Single-Case Design Research: Brief Report

ERIC Educational Resources Information Center

Ottley, Jennifer Riggie; Ferron, John M.; Hanline, Mary Frances

2016-01-01

The purpose of this study was to explain the variability in data collected from a single-case design study and to identify predictors of communicative outcomes for children with developmental delays or disabilities (n = 4). Using SAS® University Edition, we fit multilevel models with time nested within children. Children's level of baseline…

Procedural Sensitivities of Effect Sizes for Single-Case Designs with Directly Observed Behavioral Outcome Measures

ERIC Educational Resources Information Center

Pustejovsky, James E.

2018-01-01

A wide variety of effect size indices have been proposed for quantifying the magnitude of treatment effects in single-case designs. Commonly used measures include parametric indices such as the standardized mean difference, as well as non-overlap measures such as the percentage of non-overlapping data, improvement rate difference, and non-overlap…

Fully Bayesian Estimation of Data from Single Case Designs

ERIC Educational Resources Information Center

Rindskopf, David

2013-01-01

Single case designs (SCDs) generally consist of a small number of short time series in two or more phases. The analysis of SCDs statistically fits in the framework of a multilevel model, or hierarchical model. The usual analysis does not take into account the uncertainty in the estimation of the random effects. This not only has an effect on the…

Therapist-Aided Exposure for Women with Lifelong Vaginismus: A Replicated Single-Case Design

ERIC Educational Resources Information Center

ter Kuile, Moniek M.; Bulte, Isis; Weijenborg, Philomeen T. M.; Beekman, Aart; Melles, Reinhilde; Onghena, Patrick

2009-01-01

Vaginismus is commonly described as a persistent difficulty in allowing vaginal entry of a penis or other object. Lifelong vaginismus occurs when a woman has never been able to have intercourse. A replicated single-case A-B-phase design was used to investigate the effectiveness of therapist-aided exposure for lifelong vaginismus. A baseline period…

Confidence intervals for single-case effect size measures based on randomization test inversion.

PubMed

Michiels, Bart; Heyvaert, Mieke; Meulders, Ann; Onghena, Patrick

2017-02-01

In the current paper, we present a method to construct nonparametric confidence intervals (CIs) for single-case effect size measures in the context of various single-case designs. We use the relationship between a two-sided statistical hypothesis test at significance level α and a 100 (1 - α) % two-sided CI to construct CIs for any effect size measure θ that contain all point null hypothesis θ values that cannot be rejected by the hypothesis test at significance level α. This method of hypothesis test inversion (HTI) can be employed using a randomization test as the statistical hypothesis test in order to construct a nonparametric CI for θ. We will refer to this procedure as randomization test inversion (RTI). We illustrate RTI in a situation in which θ is the unstandardized and the standardized difference in means between two treatments in a completely randomized single-case design. Additionally, we demonstrate how RTI can be extended to other types of single-case designs. Finally, we discuss a few challenges for RTI as well as possibilities when using the method with other effect size measures, such as rank-based nonoverlap indices. Supplementary to this paper, we provide easy-to-use R code, which allows the user to construct nonparametric CIs according to the proposed method.

The conditional power of randomization tests for single-case effect sizes in designs with randomized treatment order: A Monte Carlo simulation study.

PubMed

Michiels, Bart; Heyvaert, Mieke; Onghena, Patrick

2018-04-01

The conditional power (CP) of the randomization test (RT) was investigated in a simulation study in which three different single-case effect size (ES) measures were used as the test statistics: the mean difference (MD), the percentage of nonoverlapping data (PND), and the nonoverlap of all pairs (NAP). Furthermore, we studied the effect of the experimental design on the RT's CP for three different single-case designs with rapid treatment alternation: the completely randomized design (CRD), the randomized block design (RBD), and the restricted randomized alternation design (RRAD). As a third goal, we evaluated the CP of the RT for three types of simulated data: data generated from a standard normal distribution, data generated from a uniform distribution, and data generated from a first-order autoregressive Gaussian process. The results showed that the MD and NAP perform very similarly in terms of CP, whereas the PND performs substantially worse. Furthermore, the RRAD yielded marginally higher power in the RT, followed by the CRD and then the RBD. Finally, the power of the RT was almost unaffected by the type of the simulated data. On the basis of the results of the simulation study, we recommend at least 20 measurement occasions for single-case designs with a randomized treatment order that are to be evaluated with an RT using a 5% significance level. Furthermore, we do not recommend use of the PND, because of its low power in the RT.

Operationally Comparable Effect Sizes for Quantifying Changes in Behavior, with Application to Meta-Analysis of Single-Case Studies

ERIC Educational Resources Information Center

Pustejovsky, James E.

2013-01-01

Single-case designs (SCDs) are a class of research methods for evaluating intervention effects by taking repeated measurements of an outcome over time on a single case, both before and after the deliberate introduction of a treatment. SCDs are used heavily in fields such as special education, school psychology, social work, and applied behavior…

77 FR 11087 - Applications for New Awards; Investing in Innovation Fund, Development Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

... prevents even the appearance of a conflict of interest. Interrupted time series design \\8\\ means a type of.... \\8\\ A single subject or single case design is an adaptation of an interrupted time series design that... matched comparison group designs (as defined in this notice), interrupted time series designs (as defined...

75 FR 12072 - Office of Innovation and Improvement; Overview Information: Investing in Innovation Fund; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-12

... matched comparison group designs (as defined in this notice), interrupted time series designs (as defined... reading skills administered in the same way to both groups). Interrupted time series design \\3\\ means a... findings. \\3\\ A single subject or single case design is an adaptation of an interrupted time series design...

Multivariable feedback design - Concepts for a classical/modern synthesis

NASA Technical Reports Server (NTRS)

Doyle, J. C.; Stein, G.

1981-01-01

This paper presents a practical design perspective on multivariable feedback control problems. It reviews the basic issue - feedback design in the face of uncertainties - and generalizes known single-input, single-output (SISO) statements and constraints of the design problem to multiinput, multioutput (MIMO) cases. Two major MIMO design approaches are then evaluated in the context of these results.

Communicating Experimental Findings in Single Case Design Research: How to Use Celeration Values and Celeration Multipliers to Measure Direction, Magnitude, and Change of Slope

ERIC Educational Resources Information Center

Datchuk, Shawn M.; Kubina, Richard M., Jr.

2011-01-01

The accumulation of scientific knowledge greatly depends upon the critical review of experimental findings by ones peers. In single case design research, experimenters present findings with graphical displays of data and narrative description of a visual analysis. To aid in efficient and accurate description of experimental findings, the research…

The Influence of Function, Topography, and Setting on Noncontingent Reinforcement Effect Sizes for Reduction in Problem Behavior: A Meta-Analysis of Single-Case Experimental Design Data

ERIC Educational Resources Information Center

Ritter, William A.; Barnard-Brak, Lucy; Richman, David M.; Grubb, Laura M.

2018-01-01

Richman et al. ("J Appl Behav Anal" 48:131-152, 2015) completed a meta-analytic analysis of single-case experimental design data on noncontingent reinforcement (NCR) for the treatment of problem behavior exhibited by individuals with developmental disabilities. Results showed that (1) NCR produced very large effect sizes for reduction in…

Single-Case Design Research: Building the Evidence-Base in the Field of Education of Deaf and Hard of Hearing Students

ERIC Educational Resources Information Center

Cannon, Joanna E.; Guardino, Caroline; Antia, Shirin D.; Luckner, John L.

2015-01-01

The field of education of deaf and hard of hearing (DHH) students has a paucity of evidence-based practices (EBPs) to guide instruction. The authors discussed how the research methodology of single-case design (SCD) can be used to build EBPs through direct and systematic replication of studies. An overview of SCD research methods is presented,…

One vs two primary LOX feedline configuration study for the National Launch System

NASA Technical Reports Server (NTRS)

Dill, K.; Davis, D.; Bates, R.; Tarwater, R.

1992-01-01

Six single LOX feedline designs were evaluated for use on the National Launch Vehicle. A single feedline design, designated the 'Spider', was chosen and compared to the baseline system. The baseline configuration employs two 20-inch I.D. lines, each supplying LOX to three 650,000 lbf thrust Space Transportation Main Engines. Five single feedline diameters were examined for the spider configuration; 22, 24, 26, 28, and 30-inch I.D. System dry weights and LOX residuals were estimated. These parameters, along with calculated staged mass for the different single line and baseline configurations, were used to calculate the payload mass to orbit. For the cases where LOX is drained to minimum NPSP conditions, none of the single lines performed as well as the dual line system, although the 22-inch diameter single line compared well. However, for the cases where LOX is drained to operating levels (LOX level at the booster and spider manifolds for the dual and single line configurations, respectively), the 22 - 26-inch I.D. single line systems show a greater payload capability.

Ceramics for the advanced automotive gas turbine engine - A look at a single shaft design

NASA Technical Reports Server (NTRS)

Nosek, S. M.

1978-01-01

A single-shaft regenerative design with a single-stage radial turbine is analyzed in terms of achievable fuel economy for the cases of both limited and unlimited turbine tip speed and regenerator inlet temperature. The 100-hp engine for a 3500-lb automobile is designed to use gasoline. Fuel economy data and operating parameters are presented for different values of turbine inlet temperatures, and turbine stress estimates and ceramic design stress estimates are discussed.

Research Design Options for Intervention Studies.

PubMed

Lobo, Michele A; Kagan, Sarah H; Corrigan, John D

2017-07-01

To review research designs for rehabilitation. Single-case, observational, and qualitative designs are highlighted in terms of recent advances and ability to answer important scientific questions about rehabilitation. Single-case, observational, and qualitative designs can be conducted in a systematic and rigorous manner that provides important information that cannot be acquired using more common designs, such as randomized controlled trials. These less commonly used designs may be more feasible and effective in answering many research questions in the field of rehabilitation. Researchers should consider these designs when selecting the optimal design to answer their research questions. We should improve education about the advantages and disadvantages of existing research designs to enable more critical analysis of the scientific literature we read and review to avoid undervaluing studies not within more commonly used categories.

Meta-Analysis of Incremental Rehearsal Using Phi Coefficients to Compare Single-Case and Group Designs

ERIC Educational Resources Information Center

Burns, Matthew K.; Zaslofsky, Anne F.; Kanive, Rebecca; Parker, David C.

2012-01-01

The current study meta-analyzed single-case design (SCD) and group research regarding incremental rehearsal (IR). We used phi to meta-analyze data from 19 IR studies. Data from the SCD studies resulted in a nonoverlap of all pairs (NAP) score of 98.9% (95% CI = 97.6-100%), which resulted in a weighted phi of 0.77 (95% CI = 0.69-0.83). The group…

Supply Chain Sustainability Analysis of Indirect Liquefaction of Blended Biomass to Produce High Octane Gasoline

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Hao; Canter, Christina E.; Dunn, Jennifer B.

This report describes the SCSA of the production of renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of lignocellulosic biomass. This SCSA was developed for both the 2015 SOT (Hartley et al., 2015; ANL, 2016; DOE, 2016) and the 2017 design case for feedstock logistics (INL, 2014) and for both the 2015 SOT (Tan et al., 2015a) and the 2022 target case for HOG production via IDL (Tan et al., 2015b). The design includes advancements that are likely and targeted to be achieved by 2017 for the feedstock logistics and 2022 for the IDL conversion process. In the SCSA,more » the 2015 SOT case for the conversion process, as modeled in Tan et al. (2015b), uses the 2015 SOT feedstock blend of pulpwood, wood residue, and construction and demolition waste (C&D). Moreover, the 2022 design case for the conversion process, as described in Tan et al. (2015a), uses the 2017 design case blend of pulpwood, wood residue, switchgrass, and C&D. The performance characteristics of this blend are consistent with those of a single woody feedstock (e.g., pine or poplar). We also examined the influence of using a single feedstock type on SCSA results for the design case. These single feedstock scenarios could be viewed as bounding SCSA results given that the different components of the feedstock blend have varying energy and material demands for production and logistics.« less

A generalized least squares regression approach for computing effect sizes in single-case research: application examples.

PubMed

Maggin, Daniel M; Swaminathan, Hariharan; Rogers, Helen J; O'Keeffe, Breda V; Sugai, George; Horner, Robert H

2011-06-01

A new method for deriving effect sizes from single-case designs is proposed. The strategy is applicable to small-sample time-series data with autoregressive errors. The method uses Generalized Least Squares (GLS) to model the autocorrelation of the data and estimate regression parameters to produce an effect size that represents the magnitude of treatment effect from baseline to treatment phases in standard deviation units. In this paper, the method is applied to two published examples using common single case designs (i.e., withdrawal and multiple-baseline). The results from these studies are described, and the method is compared to ten desirable criteria for single-case effect sizes. Based on the results of this application, we conclude with observations about the use of GLS as a support to visual analysis, provide recommendations for future research, and describe implications for practice. Copyright © 2011 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

QuantifyMe: An Open-Source Automated Single-Case Experimental Design Platform.

PubMed

Taylor, Sara; Sano, Akane; Ferguson, Craig; Mohan, Akshay; Picard, Rosalind W

2018-04-05

Smartphones and wearable sensors have enabled unprecedented data collection, with many products now providing feedback to users about recommended step counts or sleep durations. However, these recommendations do not provide personalized insights that have been shown to be best suited for a specific individual. A scientific way to find individualized recommendations and causal links is to conduct experiments using single-case experimental design; however, properly designed single-case experiments are not easy to conduct on oneself. We designed, developed, and evaluated a novel platform, QuantifyMe, for novice self-experimenters to conduct proper-methodology single-case self-experiments in an automated and scientific manner using their smartphones. We provide software for the platform that we used (available for free on GitHub), which provides the methodological elements to run many kinds of customized studies. In this work, we evaluate its use with four different kinds of personalized investigations, examining how variables such as sleep duration and regularity, activity, and leisure time affect personal happiness, stress, productivity, and sleep efficiency. We conducted a six-week pilot study ( N = 13) to evaluate QuantifyMe. We describe the lessons learned developing the platform and recommendations for its improvement, as well as its potential for enabling personalized insights to be scientifically evaluated in many individuals, reducing the high administrative cost for advancing human health and wellbeing.

QuantifyMe: An Open-Source Automated Single-Case Experimental Design Platform †

PubMed Central

Sano, Akane; Ferguson, Craig; Mohan, Akshay; Picard, Rosalind W.

2018-01-01

Smartphones and wearable sensors have enabled unprecedented data collection, with many products now providing feedback to users about recommended step counts or sleep durations. However, these recommendations do not provide personalized insights that have been shown to be best suited for a specific individual. A scientific way to find individualized recommendations and causal links is to conduct experiments using single-case experimental design; however, properly designed single-case experiments are not easy to conduct on oneself. We designed, developed, and evaluated a novel platform, QuantifyMe, for novice self-experimenters to conduct proper-methodology single-case self-experiments in an automated and scientific manner using their smartphones. We provide software for the platform that we used (available for free on GitHub), which provides the methodological elements to run many kinds of customized studies. In this work, we evaluate its use with four different kinds of personalized investigations, examining how variables such as sleep duration and regularity, activity, and leisure time affect personal happiness, stress, productivity, and sleep efficiency. We conducted a six-week pilot study (N = 13) to evaluate QuantifyMe. We describe the lessons learned developing the platform and recommendations for its improvement, as well as its potential for enabling personalized insights to be scientifically evaluated in many individuals, reducing the high administrative cost for advancing human health and wellbeing. PMID:29621133

Single case evaluation of the effects of aromatherapy and massage on disturbed behaviour in severe dementia.

PubMed

Brooker, D J; Snape, M; Johnson, E; Ward, D; Payne, M

1997-05-01

Aromatherapy and massage could provide a useful addition to psychological therapeutic interventions with clients suffering from dementia. The effects of aromatherapy and massage on disturbed behaviour in four individuals with severe dementia were evaluated using a single-case research design. Each participant received 10 treatment sessions of aromatherapy, aromatherapy and massage combined, and massage alone. The effects on each individual's behaviour in the hour following treatment were assessed against 10 'no treatment' control sessions. Reliable individualized disturbed behaviour scales were designed. The effects of the treatments were mixed. The opinion of the staff providing treatment was that all participants benefited. On close scrutiny, only one of the participants benefited from the aromatherapy and massage to a degree that reached statistical significance. In two of the cases aromatherapy and massage led to an increase in agitated behaviour. The importance of the single case study approach with this client group is discussed.

Enhancing Cultural Adaptation through Friendship Training: A Single-Case Study.

ERIC Educational Resources Information Center

Liu, Yi-Ching; Baker, Stanley B.

1993-01-01

Four-year-old girl from mainland China experienced culture shock when attending American university day-care center. Counseling intern from Taiwan designed friendship training program based on assumptions concerning adaptation, acculturation, and peer relationships. Evaluated as intensive single-case study, findings indicated the program may be…

Performance analysis and dynamic modeling of a single-spool turbojet engine

NASA Astrophysics Data System (ADS)

Andrei, Irina-Carmen; Toader, Adrian; Stroe, Gabriela; Frunzulica, Florin

2017-01-01

The purposes of modeling and simulation of a turbojet engine are the steady state analysis and transient analysis. From the steady state analysis, which consists in the investigation of the operating, equilibrium regimes and it is based on appropriate modeling describing the operation of a turbojet engine at design and off-design regimes, results the performance analysis, concluded by the engine's operational maps (i.e. the altitude map, velocity map and speed map) and the engine's universal map. The mathematical model that allows the calculation of the design and off-design performances, in case of a single spool turbojet is detailed. An in house code was developed, its calibration was done for the J85 turbojet engine as the test case. The dynamic modeling of the turbojet engine is obtained from the energy balance equations for compressor, combustor and turbine, as the engine's main parts. The transient analysis, which is based on appropriate modeling of engine and its main parts, expresses the dynamic behavior of the turbojet engine, and further, provides details regarding the engine's control. The aim of the dynamic analysis is to determine a control program for the turbojet, based on the results provided by performance analysis. In case of the single-spool turbojet engine, with fixed nozzle geometry, the thrust is controlled by one parameter, which is the fuel flow rate. The design and management of the aircraft engine controls are based on the results of the transient analysis. The construction of the design model is complex, since it is based on both steady-state and transient analysis, further allowing the flight path cycle analysis and optimizations. This paper presents numerical simulations for a single-spool turbojet engine (J85 as test case), with appropriate modeling for steady-state and dynamic analysis.

Single-case synthesis tools I: Comparing tools to evaluate SCD quality and rigor.

PubMed

Zimmerman, Kathleen N; Ledford, Jennifer R; Severini, Katherine E; Pustejovsky, James E; Barton, Erin E; Lloyd, Blair P

2018-03-03

Tools for evaluating the quality and rigor of single case research designs (SCD) are often used when conducting SCD syntheses. Preferred components include evaluations of design features related to the internal validity of SCD to obtain quality and/or rigor ratings. Three tools for evaluating the quality and rigor of SCD (Council for Exceptional Children, What Works Clearinghouse, and Single-Case Analysis and Design Framework) were compared to determine if conclusions regarding the effectiveness of antecedent sensory-based interventions for young children changed based on choice of quality evaluation tool. Evaluation of SCD quality differed across tools, suggesting selection of quality evaluation tools impacts evaluation findings. Suggestions for selecting an appropriate quality and rigor assessment tool are provided and across-tool conclusions are drawn regarding the quality and rigor of studies. Finally, authors provide guidance for using quality evaluations in conjunction with outcome analyses when conducting syntheses of interventions evaluated in the context of SCD. Copyright © 2018 Elsevier Ltd. All rights reserved.

Contemplating a New Model for Air Force Aerospace Medical Technician Skills Sustainment Training

DTIC Science & Technology

2006-03-01

qualitative research designs. The major designs described by these researchers included: grounded theory , narrative research ... phenomenological research , ethnographies , content analysis, and case study . Because each of these designs can stand alone as an individual research ...exploratory, embedded, single case study . A mixed methods research approach will be applied in an effort to discover

Meta-Analysis of Interventions for Basic Mathematics Computation in Single-Case Research

ERIC Educational Resources Information Center

Methe, Scott A.; Kilgus, Stephen P.; Neiman, Cheryl; Riley-Tillman, T. Chris

2012-01-01

This study examined interventions for addition and subtraction that were implemented through single-case design (SCD) research studies. We attempted to extend prior SCD meta-analyses by examining differences in effect sizes across several moderating variables and by including a novel index of effect, improvement rate difference (IRD). We also…

Bottom-Up Analysis of Single-Case Research Designs

ERIC Educational Resources Information Center

Parker, Richard I.; Vannest, Kimberly J.

2012-01-01

This paper defines and promotes the qualities of a "bottom-up" approach to single-case research (SCR) data analysis. Although "top-down" models, for example, multi-level or hierarchical linear models, are gaining momentum and have much to offer, interventionists should be cautious about analyses that are not easily understood, are not governed by…

The Iterative Use of Single Case Research Designs to Advance the Science of EI/ECSE

ERIC Educational Resources Information Center

Barton, Erin E.; Ledford, Jennifer R.; Lane, Justin D.; Decker, Jessica; Germansky, Sara E.; Hemmeter, Mary Louise; Kaiser, Ann

2016-01-01

Research in early intervention/early childhood special education (EI/ECSE) is focused on identifying effective practices related to positive outcomes for young children with disabilities and their families. Individual responses to evidence-based practices are often variable, and non-responders are common. Single case research (SCR) might be…

Case study: videogame distraction reduces behavioral distress in a preschool-aged child undergoing repeated burn dressing changes: a single-subject design.

PubMed

Sil, Soumitri; Dahlquist, Lynnda M; Burns, Andrew J

2013-04-01

This single-subject design study evaluated the feasibility and efficacy of passive and interactive videogame distraction on behavioral distress for a preschool-aged child receiving repeated burn dressing changes. A 4-year-old girl underwent 3 baseline and 10 videogame distraction sessions (5 passive and 5 interactive) using a restricted alternating treatments design. Observed behavioral distress was coded, and parents and nurses rated the child's distress and cooperative behavior. Relative to baseline, behavioral distress decreased and cooperative behavior increased immediately after the onset of videogame distraction. Single Case Randomization Tests revealed significantly lower behavioral distress and greater cooperation during interactive videogame distraction relative to passive videogame distraction. Interactive videogame distraction appears to be a feasible and effective pain management strategy for a preschool-aged child undergoing repeated painful medical procedures.

Use of the Randomization Test in Single-Case Research

ERIC Educational Resources Information Center

Grünke, Matthias; Boon, Richard T.; Burke, Mack D.

2015-01-01

The purpose of this study was to illustrate the use of the randomization test for single-case research designs (SCR; Kratochwill & Levin, 2010). To demonstrate the application of this approach, a systematic replication of Grünke, Wilbert, and Calder Stegemann (2013) was conducted to evaluate the effects of a story map to improve the reading…

Single-Case Design and Evaluation in R: An Introduction and Tutorial for School Psychologists

ERIC Educational Resources Information Center

McGill, Ryan J.

2017-01-01

For the appraisal of single-case intervention data, school psychologists have been encouraged to focus most, if not all, of their interpretive weight on the visual inspection of graphed data. However, existing software programs provide practitioners with limited features for systematic visual inspection. R (R Development Core Team, 2014) is a…

Effect Size in Single-Case Research: A Review of Nine Nonoverlap Techniques

ERIC Educational Resources Information Center

Parker, Richard I.; Vannest, Kimberly J.; Davis, John L.

2011-01-01

With rapid advances in the analysis of data from single-case research designs, the various behavior-change indices, that is, effect sizes, can be confusing. To reduce this confusion, nine effect-size indices are described and compared. Each of these indices examines data nonoverlap between phases. Similarities and differences, both conceptual and…

Appraisal of comparative single-case experimental designs for instructional interventions with non-reversible target behaviors: Introducing the CSCEDARS ("Cedars").

PubMed

Schlosser, Ralf W; Belfiore, Phillip J; Sigafoos, Jeff; Briesch, Amy M; Wendt, Oliver

2018-05-28

Evidence-based practice as a process requires the appraisal of research as a critical step. In the field of developmental disabilities, single-case experimental designs (SCEDs) figure prominently as a means for evaluating the effectiveness of non-reversible instructional interventions. Comparative SCEDs contrast two or more instructional interventions to document their relative effectiveness and efficiency. As such, these designs have great potential to inform evidence-based decision-making. To harness this potential, however, interventionists and authors of systematic reviews need tools to appraise the evidence generated by these designs. Our literature review revealed that existing tools do not adequately address the specific methodological considerations of comparative SCEDs that aim to compare instructional interventions of non-reversible target behaviors. The purpose of this paper is to introduce the Comparative Single-Case Experimental Design Rating System (CSCEDARS, "cedars") as a tool for appraising the internal validity of comparative SCEDs of two or more non-reversible instructional interventions. Pertinent literature will be reviewed to establish the need for this tool and to underpin the rationales for individual rating items. Initial reliability information will be provided as well. Finally, directions for instrument validation will be proposed. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effects of Singapore's Model Method on Elementary Student Problem Solving Performance: Single Subject Research

ERIC Educational Resources Information Center

Mahoney, Kevin

2012-01-01

This research investigation examined the effects of Singapore's Model Method, also known as "model drawing" or "bar modeling" on the word problem-solving performance of American third and fourth grade students. Employing a single-case design, a researcher-designed teaching intervention was delivered to a child in third…

Improving Treatment Plan Implementation in Schools: A Meta-Analysis of Single Subject Design Studies

ERIC Educational Resources Information Center

Noell, George H.; Gansle, Kristin A.; Mevers, Joanna Lomas; Knox, R. Maria; Mintz, Joslyn Cynkus; Dahir, Amanda

2014-01-01

Twenty-nine peer-reviewed journal articles that analyzed intervention implementation in schools using single-case experimental designs were meta-analyzed. These studies reported 171 separate data paths and provided 3,991 data points. The meta-analysis was accomplished by fitting data extracted from graphs in mixed linear growth models. This…

Comparing Single Case Design Overlap-Based Effect Size Metrics From Studies Examining Speech Generating Device Interventions

PubMed Central

Chen, Mo; Hyppa-Martin, Jolene K.; Reichle, Joe E.; Symons, Frank J.

2017-01-01

Meaningfully synthesizing single case experimental data from intervention studies comprised of individuals with low incidence conditions and generating effect size estimates remains challenging. Seven effect size metrics were compared for single case design (SCD) data focused on teaching speech generating device use to individuals with intellectual and developmental disabilities (IDD) with moderate to profound levels of impairment. The effect size metrics included percent of data points exceeding the median (PEM), percent of nonoverlapping data (PND), improvement rate difference (IRD), percent of all nonoverlapping data (PAND), Phi, nonoverlap of all pairs (NAP), and Taunovlap. Results showed that among the seven effect size metrics, PAND, Phi, IRD, and PND were more effective in quantifying intervention effects for the data sample (N = 285 phase or condition contrasts). Results are discussed with respect to issues concerning extracting and calculating effect sizes, visual analysis, and SCD intervention research in IDD. PMID:27119210

Analysis and meta-analysis of single-case designs with a standardized mean difference statistic: a primer and applications.

PubMed

Shadish, William R; Hedges, Larry V; Pustejovsky, James E

2014-04-01

This article presents a d-statistic for single-case designs that is in the same metric as the d-statistic used in between-subjects designs such as randomized experiments and offers some reasons why such a statistic would be useful in SCD research. The d has a formal statistical development, is accompanied by appropriate power analyses, and can be estimated using user-friendly SPSS macros. We discuss both advantages and disadvantages of d compared to other approaches such as previous d-statistics, overlap statistics, and multilevel modeling. It requires at least three cases for computation and assumes normally distributed outcomes and stationarity, assumptions that are discussed in some detail. We also show how to test these assumptions. The core of the article then demonstrates in depth how to compute d for one study, including estimation of the autocorrelation and the ratio of between case variance to total variance (between case plus within case variance), how to compute power using a macro, and how to use the d to conduct a meta-analysis of studies using single-case designs in the free program R, including syntax in an appendix. This syntax includes how to read data, compute fixed and random effect average effect sizes, prepare a forest plot and a cumulative meta-analysis, estimate various influence statistics to identify studies contributing to heterogeneity and effect size, and do various kinds of publication bias analyses. This d may prove useful for both the analysis and meta-analysis of data from SCDs. Copyright © 2013 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Case Study: Videogame Distraction Reduces Behavioral Distress in a Preschool-Aged Child Undergoing Repeated Burn Dressing Changes: A Single-Subject Design

PubMed Central

Sil, Soumitri; Burns, Andrew J.

2013-01-01

Objective This single-subject design study evaluated the feasibility and efficacy of passive and interactive videogame distraction on behavioral distress for a preschool-aged child receiving repeated burn dressing changes. Method A 4-year-old girl underwent 3 baseline and 10 videogame distraction sessions (5 passive and 5 interactive) using a restricted alternating treatments design. Observed behavioral distress was coded, and parents and nurses rated the child’s distress and cooperative behavior. Results Relative to baseline, behavioral distress decreased and cooperative behavior increased immediately after the onset of videogame distraction. Single Case Randomization Tests revealed significantly lower behavioral distress and greater cooperation during interactive videogame distraction relative to passive videogame distraction. Conclusions Interactive videogame distraction appears to be a feasible and effective pain management strategy for a preschool-aged child undergoing repeated painful medical procedures. PMID:23248343

Control allocation for gimballed/fixed thrusters

NASA Astrophysics Data System (ADS)

Servidia, Pablo A.

2010-02-01

Some overactuated control systems use a control distribution law between the controller and the set of actuators, usually called control allocator. Beyond the control allocator, the configuration of actuators may be designed to be able to operate after a single point of failure, for system optimization and/or decentralization objectives. For some type of actuators, a control allocation is used even without redundancy, being a good example the design and operation of thruster configurations. In fact, as the thruster mass flow direction and magnitude only can be changed under certain limits, this must be considered in the feedback implementation. In this work, the thruster configuration design is considered in the fixed (F), single-gimbal (SG) and double-gimbal (DG) thruster cases. The minimum number of thrusters for each case is obtained and for the resulting configurations a specific control allocation is proposed using a nonlinear programming algorithm, under nominal and single-point of failure conditions.

Strategically Focused Training in Six Sigma Way: A Case Study

ERIC Educational Resources Information Center

Pandey, Ashish

2007-01-01

Purpose: The purpose of the current study is to examine the utility of Six Sigma interventions as a performance measure and explore its applicability for making the training design and delivery operationally efficient and strategically effective. Design/methodology/approach: This is a single revelatory case study. Data were collected from multiple…

Pitting and Bending Fatigue Evaluations of a New Case-Carburized Gear Steel

NASA Technical Reports Server (NTRS)

Krantz, Timothy; Tufts, Brian

2007-01-01

The power density of a gearbox is an important consideration for many applications and is especially important for gearboxes used on aircraft. One approach to improving power density of gearing is to improve the steel properties by design of the alloy. The alloy tested in this work was designed to be case-carburized with surface hardness of Rockwell C66 after hardening. Test gear performance was evaluated using surface fatigue tests and single-tooth bending fatigue tests. The performance of gears made from the new alloy was compared to the performance of gears made from two alloys currently used for aviation gearing. The new alloy exhibited significantly better performance in surface fatigue testing, demonstrating the value of the improved properties in the case layer. However, the alloy exhibited lesser performance in single-tooth bending fatigue testing. The fracture toughness of the tested gears was insufficient for use in aircraft applications as judged by the behavior exhibited during the single tooth bending tests. This study quantified the performance of the new alloy and has provided guidance for the design and development of next generation gear steels.

The Relationship between Visual Analysis and Five Statistical Analyses in a Simple AB Single-Case Research Design

ERIC Educational Resources Information Center

Brossart, Daniel F.; Parker, Richard I.; Olson, Elizabeth A.; Mahadevan, Lakshmi

2006-01-01

This study explored some practical issues for single-case researchers who rely on visual analysis of graphed data, but who also may consider supplemental use of promising statistical analysis techniques. The study sought to answer three major questions: (a) What is a typical range of effect sizes from these analytic techniques for data from…

A Generalized Least Squares Regression Approach for Computing Effect Sizes in Single-Case Research: Application Examples

ERIC Educational Resources Information Center

Maggin, Daniel M.; Swaminathan, Hariharan; Rogers, Helen J.; O'Keeffe, Breda V.; Sugai, George; Horner, Robert H.

2011-01-01

A new method for deriving effect sizes from single-case designs is proposed. The strategy is applicable to small-sample time-series data with autoregressive errors. The method uses Generalized Least Squares (GLS) to model the autocorrelation of the data and estimate regression parameters to produce an effect size that represents the magnitude of…

Single-Case Experimental Designs: A Systematic Review of Published Research and Current Standards

PubMed Central

Smith, Justin D.

2013-01-01

This article systematically reviews the research design and methodological characteristics of single-case experimental design (SCED) research published in peer-reviewed journals between 2000 and 2010. SCEDs provide researchers with a flexible and viable alternative to group designs with large sample sizes. However, methodological challenges have precluded widespread implementation and acceptance of the SCED as a viable complementary methodology to the predominant group design. This article includes a description of the research design, measurement, and analysis domains distinctive to the SCED; a discussion of the results within the framework of contemporary standards and guidelines in the field; and a presentation of updated benchmarks for key characteristics (e.g., baseline sampling, method of analysis), and overall, it provides researchers and reviewers with a resource for conducting and evaluating SCED research. The results of the systematic review of 409 studies suggest that recently published SCED research is largely in accordance with contemporary criteria for experimental quality. Analytic method emerged as an area of discord. Comparison of the findings of this review with historical estimates of the use of statistical analysis indicates an upward trend, but visual analysis remains the most common analytic method and also garners the most support amongst those entities providing SCED standards. Although consensus exists along key dimensions of single-case research design and researchers appear to be practicing within these parameters, there remains a need for further evaluation of assessment and sampling techniques and data analytic methods. PMID:22845874

Alternating treatments design: one strategy for comparing the effects of two treatments in a single subject.

PubMed Central

Barlow, D H; Hayes, S C

1979-01-01

A little used and often confused design, capable of comparing two treatments within a single subject, has been termed, variously, a multielement baseline design, a multiple schedule design, and a randomization design. The background of these terms is reviewed, and a new, more descriptive term, Alternating Treatments Design, is proposed. Critical differences between this design and a Simultaneous Treatment Design are outlined, and experimental questions answerable by each design are noted. Potential problems with multiple treatment interference in this procedure are divided into sequential confounding, carryover effects, and alternation effects and the importance of these issues vis-a-vis other single-case experimental designs is considered. Methods of minimizing multiple treatment interference as well as methods of studying these effects are outlined. Finally, appropriate uses of Alternating Treatments Designs are described and discussed in the context of recent examples. PMID:489478

Therapeutic assessment for preadolescent boys with oppositional defiant disorder: a replicated single-case time-series design.

PubMed

Smith, Justin D; Handler, Leonard; Nash, Michael R

2010-09-01

The Therapeutic Assessment (TA) model is a relatively new treatment approach that fuses assessment and psychotherapy. The study examines the efficacy of this model with preadolescent boys with oppositional defiant disorder and their families. A replicated single-case time-series design with daily measures is used to assess the effects of TA and to track the process of change as it unfolds. All 3 families benefitted from participation in TA across multiple domains of functioning, but the way in which change unfolded was unique for each family. These findings are substantiated by the Behavior Assessment System for Children (Reynolds & Kamphaus, 2004). The TA model is shown to be an effective treatment for preadolescent boys with oppositional defiant disorder and their families. Further, the time-series design of this study illustrated how this empirically grounded case-based methodology reveals when and how change unfolds during treatment in a way that is usually not possible with other research designs.

Gender and Leadership Styles in Single-Sex Academic Institutions

ERIC Educational Resources Information Center

Taleb, Hanan M.

2010-01-01

Purpose: This paper aims to investigate the relationship between gender and female leadership styles in a single-sex academic institution in Saudi Arabia. Design/methodology/approach: Essentially, a qualitative research approach that utilised a single case-study methodology was adopted. As part of this research, seven in-depth semi-structured…

Feedback system design with an uncertain plant

NASA Technical Reports Server (NTRS)

Milich, D.; Valavani, L.; Athans, M.

1986-01-01

A method is developed to design a fixed-parameter compensator for a linear, time-invariant, SISO (single-input single-output) plant model characterized by significant structured, as well as unstructured, uncertainty. The controller minimizes the H(infinity) norm of the worst-case sensitivity function over the operating band and the resulting feedback system exhibits robust stability and robust performance. It is conjectured that such a robust nonadaptive control design technique can be used on-line in an adaptive control system.

Intelligent Engine Systems

NASA Technical Reports Server (NTRS)

Xie, Ming

2008-01-01

A high bypass jet engine fan case represents one of the largest, heaviest single components in an engine. In addition to supporting the inlet and providing the fan flowpath, the most critical function is the containment of a failed fan blade. In this development program, a lightweight, low-cost composite containment case with diagnostic capabilities was developed, fabricated, and tested. The fan case design, containment methods, and diagnostic concepts evaluated in the initial Propulsion 21 program were improved and scaled up to a full case design.

Implementation of Apple's iPad as an Instructional Tool in the Elementary Language Arts Classroom: A Phenomenological Case Study

ERIC Educational Resources Information Center

Kolarcik, Tiffany Nicole

2013-01-01

This study explored how elementary educators implement iPad devices as instructional tools to enhance their language arts instruction. The study used a phenomenological qualitative design with a single-subject case study design coupled with an embedded rubric component. The researcher conducted in-depth, semi-structured interviews, classroom…

Alignment of single-case design (SCD) research with individuals who are deaf or hard of hearing with the what Works Clearinghouse standards for SCD research.

PubMed

Wendel, Erica; Cawthon, Stephanie W; Ge, Jin Jin; Beretvas, S Natasha

2015-04-01

The authors assessed the quality of single-case design (SCD) studies that assess the impact of interventions on outcomes for individuals who are deaf or hard-of-hearing (DHH). More specifically, the What Works Clearinghouse (WWC) standards for SCD research were used to assess design quality and the strength of evidence of peer-reviewed studies available in the peer-reviewed, published literature. The analysis yielded four studies that met the WWC standards for design quality, of which two demonstrated moderate to strong evidence for efficacy of the studied intervention. Results of this review are discussed in light of the benefits and the challenges to applying the WWC design standards to research with DHH individuals and other diverse, low-incidence populations. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Persistent threats to validity in single-group interrupted time series analysis with a cross over design.

PubMed

Linden, Ariel

2017-04-01

The basic single-group interrupted time series analysis (ITSA) design has been shown to be susceptible to the most common threat to validity-history-the possibility that some other event caused the observed effect in the time series. A single-group ITSA with a crossover design (in which the intervention is introduced and withdrawn 1 or more times) should be more robust. In this paper, we describe and empirically assess the susceptibility of this design to bias from history. Time series data from 2 natural experiments (the effect of multiple repeals and reinstatements of Louisiana's motorcycle helmet law on motorcycle fatalities and the association between the implementation and withdrawal of Gorbachev's antialcohol campaign with Russia's mortality crisis) are used to illustrate that history remains a threat to ITSA validity, even in a crossover design. Both empirical examples reveal that the single-group ITSA with a crossover design may be biased because of history. In the case of motorcycle fatalities, helmet laws appeared effective in reducing mortality (while repealing the law increased mortality), but when a control group was added, it was shown that this trend was similar in both groups. In the case of Gorbachev's antialcohol campaign, only when contrasting the results against those of a control group was the withdrawal of the campaign found to be the more likely culprit in explaining the Russian mortality crisis than the collapse of the Soviet Union. Even with a robust crossover design, single-group ITSA models remain susceptible to bias from history. Therefore, a comparable control group design should be included, whenever possible. © 2016 John Wiley & Sons, Ltd.

Preliminary structural design of composite main rotor blades for minimum weight

NASA Technical Reports Server (NTRS)

Nixon, Mark W.

1987-01-01

A methodology is developed to perform minimum weight structural design for composite or metallic main rotor blades subject to aerodynamic performance, material strength, autorotation, and frequency constraints. The constraints and load cases are developed such that the final preliminary rotor design will satisfy U.S. Army military specifications, as well as take advantage of the versatility of composite materials. A minimum weight design is first developed subject to satisfying the aerodynamic performance, strength, and autorotation constraints for all static load cases. The minimum weight design is then dynamically tuned to avoid resonant frequencies occurring at the design rotor speed. With this methodology, three rotor blade designs were developed based on the geometry of the UH-60A Black Hawk titanium-spar rotor blade. The first design is of a single titanium-spar cross section, which is compared with the UH-60A Black Hawk rotor blade. The second and third designs use single and multiple graphite/epoxy-spar cross sections. These are compared with the titanium-spar design to demonstrate weight savings from use of this design methodology in conjunction with advanced composite materials.

Guidelines for Graphing Data with Microsoft[R] Office 2007[TM], Office 2010[TM], and Office for Mac[TM] 2008 and 2011

ERIC Educational Resources Information Center

Barton, Erin E.; Reichow, Brian

2012-01-01

The interpretation of single-case data requires systematic visual analysis across and within conditions. Graphs are a vital component for analyzing and communicating single-case design data and a necessary tool for applied researchers and practitioners. Several articles have been published with task analyses for graphing data with the new versions…

77 FR 18229 - Applications for New Awards; Investing in Innovation Fund, Validation Grants

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-27

... the appearance of a conflict of interest. Interrupted time series design \\8\\ means a type of quasi... single case design is an adaptation of an interrupted time series design that relies on the comparison of... notice), interrupted time series designs (as defined in this notice), or regression discontinuity designs...

76 FR 32171 - Applications for New Awards; Investing in Innovation Fund

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-03

... conflict of interest. Interrupted time series design \\5\\ means a type of quasi- experimental study in... single case design is an adaptation of an interrupted time series design that relies on the comparison of...), interrupted time series designs (as defined in this notice), or regression discontinuity designs (as defined...

Evaluating statistical and clinical significance of intervention effects in single-case experimental designs: an SPSS method to analyze univariate data.

PubMed

Maric, Marija; de Haan, Else; Hogendoorn, Sanne M; Wolters, Lidewij H; Huizenga, Hilde M

2015-03-01

Single-case experimental designs are useful methods in clinical research practice to investigate individual client progress. Their proliferation might have been hampered by methodological challenges such as the difficulty applying existing statistical procedures. In this article, we describe a data-analytic method to analyze univariate (i.e., one symptom) single-case data using the common package SPSS. This method can help the clinical researcher to investigate whether an intervention works as compared with a baseline period or another intervention type, and to determine whether symptom improvement is clinically significant. First, we describe the statistical method in a conceptual way and show how it can be implemented in SPSS. Simulation studies were performed to determine the number of observation points required per intervention phase. Second, to illustrate this method and its implications, we present a case study of an adolescent with anxiety disorders treated with cognitive-behavioral therapy techniques in an outpatient psychotherapy clinic, whose symptoms were regularly assessed before each session. We provide a description of the data analyses and results of this case study. Finally, we discuss the advantages and shortcomings of the proposed method. Copyright © 2014. Published by Elsevier Ltd.

The Single-Case Reporting Guideline In BEhavioural Interventions (SCRIBE) 2016 Statement.

PubMed

Tate, Robyn L; Perdices, Michael; Rosenkoetter, Ulrike; Shadish, William; Vohra, Sunita; Barlow, David H; Horner, Robert; Kazdin, Alan; Kratochwill, Thomas; McDonald, Skye; Sampson, Margaret; Shamseer, Larissa; Togher, Leanne; Albin, Richard; Backman, Catherine; Douglas, Jacinta; Evans, Jonathan J; Gast, David; Manolov, Rumen; Mitchell, Geoffrey; Nickels, Lyndsey; Nikles, Jane; Ownsworth, Tamara; Rose, Miranda; Schmid, Christopher H; Wilson, Barbara

2017-01-01

We developed a reporting guideline to provide authors with guidance about what should be reported when writing a paper for publication in a scientific journal using a particular type of research design: the single-case experimental design. This report describes the methods used to develop the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016. As a result of 2 online surveys and a 2-day meeting of experts, the SCRIBE 2016 checklist was developed, which is a set of 26 items that authors need to address when writing about single-case research. This article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016 ) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated. We recommend that the SCRIBE 2016 is used by authors preparing manuscripts describing single-case research for publication, as well as journal reviewers and editors who are evaluating such manuscripts. SCIENTIFIC ABSTRACT Reporting guidelines, such as the Consolidated Standards of Reporting Trials (CONSORT) Statement, improve the reporting of research in the medical literature (Turner et al., 2012 ). Many such guidelines exist and the CONSORT Extension to Nonpharmacological Trials (Boutron et al., 2008 ) provides suitable guidance for reporting between-groups intervention studies in the behavioural sciences. The CONSORT Extension for N-of-1 Trials (CENT 2015) was developed for multiple crossover trials with single individuals in the medical sciences (Shamseer et al., 2015 ; Vohra et al., 2015 ), but there is no reporting guideline in the CONSORT tradition for single-case research used in the behavioural sciences. We developed the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016 to meet this need. This Statement article describes the methodology of the development of the SCRIBE 2016, along with the outcome of 2 Delphi surveys and a consensus meeting of experts. We present the resulting 26-item SCRIBE 2016 checklist. The article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016 ) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated.

The Single-Case Reporting Guideline In BEhavioural Interventions (SCRIBE) 2016 Statement †

PubMed Central

Tate, Robyn L.; Perdices, Michael; Rosenkoetter, Ulrike; Shadish, William; Vohra, Sunita; Barlow, David H.; Horner, Robert; Kazdin, Alan; Kratochwill, Thomas; McDonald, Skye; Sampson, Margaret; Shamseer, Larissa; Togher, Leanne; Albin, Richard; Backman, Catherine; Douglas, Jacinta; Evans, Jonathan J.; Gast, David; Manolov, Rumen; Mitchell, Geoffrey; Nickels, Lyndsey; Nikles, Jane; Ownsworth, Tamara; Rose, Miranda; Schmid, Christopher H.; Wilson, Barbara

2017-01-01

ABSTRACT We developed a reporting guideline to provide authors with guidance about what should be reported when writing a paper for publication in a scientific journal using a particular type of research design: the single-case experimental design. This report describes the methods used to develop the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016. As a result of 2 online surveys and a 2-day meeting of experts, the SCRIBE 2016 checklist was developed, which is a set of 26 items that authors need to address when writing about single-case research. This article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated. We recommend that the SCRIBE 2016 is used by authors preparing manuscripts describing single-case research for publication, as well as journal reviewers and editors who are evaluating such manuscripts. SCIENTIFIC ABSTRACT Reporting guidelines, such as the Consolidated Standards of Reporting Trials (CONSORT) Statement, improve the reporting of research in the medical literature (Turner et al., 2012). Many such guidelines exist and the CONSORT Extension to Nonpharmacological Trials (Boutron et al., 2008) provides suitable guidance for reporting between-groups intervention studies in the behavioural sciences. The CONSORT Extension for N-of-1 Trials (CENT 2015) was developed for multiple crossover trials with single individuals in the medical sciences (Shamseer et al., 2015; Vohra et al., 2015), but there is no reporting guideline in the CONSORT tradition for single-case research used in the behavioural sciences. We developed the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016 to meet this need. This Statement article describes the methodology of the development of the SCRIBE 2016, along with the outcome of 2 Delphi surveys and a consensus meeting of experts. We present the resulting 26-item SCRIBE 2016 checklist. The article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated. PMID:27499422

Simulation model of a single-stage lithium bromide-water absorption cooling unit

NASA Technical Reports Server (NTRS)

Miao, D.

1978-01-01

A computer model of a LiBr-H2O single-stage absorption machine was developed. The model, utilizing a given set of design data such as water-flow rates and inlet or outlet temperatures of these flow rates but without knowing the interior characteristics of the machine (heat transfer rates and surface areas), can be used to predict or simulate off-design performance. Results from 130 off-design cases for a given commercial machine agree with the published data within 2 percent.

Trajectory Design for a Single-String Impactor Concept

NASA Technical Reports Server (NTRS)

Dono Perez, Andres; Burton, Roland; Stupl, Jan; Mauro, David

2017-01-01

This paper introduces a trajectory design for a secondary spacecraft concept to augment science return in interplanetary missions. The concept consist of a single-string probe with a kinetic impactor on board that generates an artificial plume to perform in-situ sampling. The trajectory design was applied to a particular case study that samples ejecta particles from the Jovian moon Europa. Results were validated using statistical analysis. Details regarding the navigation, targeting and disposal challenges related to this concept are presented herein.

The Single-Case Reporting Guideline In BEhavioural Interventions (SCRIBE) 2016 Statement.

PubMed

Tate, Robyn L; Perdices, Michael; Rosenkoetter, Ulrike; Shadish, William; Vohra, Sunita; Barlow, David H; Horner, Robert; Kazdin, Alan; Kratochwill, Thomas; McDonald, Skye; Sampson, Margaret; Shamseer, Larissa; Togher, Leanne; Albin, Richard; Backman, Catherine; Douglas, Jacinta; Evans, Jonathan J; Gast, David; Manolov, Rumen; Mitchell, Geoffrey; Nickels, Lyndsey; Nikles, Jane; Ownsworth, Tamara; Rose, Miranda; Schmid, Christopher H; Wilson, Barbara

2016-07-01

We developed a reporting guideline to provide authors with guidance about what should be reported when writing a paper for publication in a scientific journal using a particular type of research design: the single-case experimental design. This report describes the methods used to develop the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016. As a result of 2 online surveys and a 2-day meeting of experts, the SCRIBE 2016 checklist was developed, which is a set of 26 items that authors need to address when writing about single-case research. This article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated. We recommend that the SCRIBE 2016 is used by authors preparing manuscripts describing single-case research for publication, as well as journal reviewers and editors who are evaluating such manuscripts. Reporting guidelines, such as the Consolidated Standards of Reporting Trials (CONSORT) Statement, improve the reporting of research in the medical literature (Turner et al., 2012). Many such guidelines exist and the CONSORT Extension to Nonpharmacological Trials (Boutron et al., 2008) provides suitable guidance for reporting between-groups intervention studies in the behavioral sciences. The CONSORT Extension for N-of-1 Trials (CENT 2015) was developed for multiple crossover trials with single individuals in the medical sciences (Shamseer et al., 2015; Vohra et al., 2015), but there is no reporting guideline in the CONSORT tradition for single-case research used in the behavioral sciences. We developed the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016 to meet this need. This Statement article describes the methodology of the development of the SCRIBE 2016, along with the outcome of 2 Delphi surveys and a consensus meeting of experts. We present the resulting 26-item SCRIBE 2016 checklist. The article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated. © 2016 The Author(s). Reprinted from: Tate RL, Perdices M, Rosenkoetter U, et al. The Single-Case Reporting Guideline In BEhavioural Interventions (SCRIBE) 2016 Statement. Arch Sci Psychol. 2016;4:1–9.

Department of Defense Ecosystem Management Policy Evaluation

DTIC Science & Technology

2002-08-01

HQ Naval Facilities Engineering Command, DC • Tom Hillard, Fort Stewart, GA • Manual Joia , MCLB Barstow, CA • John Krupovage, Tinker AFB, OK...studies can follow single or multiple-case designs . Multiple cases strengthen the results and increase confidence in those results (Tellis 1997...groups having responsibility for maintaining their designated data layers (range, fish and wildlife, threatened and endangered species, forestry

An Examination of Fluoxetine for the Treatment of Selective Mutism Using a Nonconcurrent Multiple-Baseline Single-Case Design Across 5 Cases.

PubMed

Barterian, Justin A; Sanchez, Joel M; Magen, Jed; Siroky, Allison K; Mash, Brittany L; Carlson, John S

2018-01-01

This study examined the utility of fluoxetine in the treatment of 5 children, aged 5 to 14 years, diagnosed with selective mutism who also demonstrated symptoms of social anxiety. A nonconcurrent, randomized, multiple-baseline, single-case design with a single-blind placebo-controlled procedure was used. Parents and the study psychiatrist completed multiple methods of assessment including Direct Behavior Ratings and questionnaires. Treatment outcomes were evaluated by calculating effect sizes for each participant as an individual and for the participants as a group. Information regarding adverse effects with an emphasis on behavioral disinhibition and ratings of parental acceptance of the intervention was gathered. All 5 children experienced improvement in social anxiety, responsive speech, and spontaneous speech with medium to large effect sizes; however, children still met criteria for selective mutism at the end of the study. Adverse events were minimal, with only 2 children experiencing brief occurrences of minor behavioral disinhibition. Parents found the treatment highly acceptable.

Solving intraocular lens-related pigment dispersion syndrome with repositioning of primary sulcus implanted single-piece IOL in the capsular bag.

PubMed

Kohnen, Thomas; Kook, Daniel

2009-08-01

We describe 2 cases of pigment dispersion syndrome (PDS) after uneventful phacoemulsification and implantation of a posterior chamber single-piece intraocular lens (IOL) with a sharp-edge design. In both cases, several days after IOL implantation, marked pigment dispersion was seen on the iris and in the trabecular meshwork, associated with an elevation in intraocular pressure (IOP). Thorough examination showed that the implanted IOL was in the ciliary sulcus. After surgical repositioning of both IOLs in the capsular bag, the pigment dispersion regressed and the IOP returned to normal limits. The 2 cases suggest that particularly in PDS patients, an IOL with an anterior sharp-edge design should be implanted in the capsular bag. Implantation in the ciliary sulcus should be avoided.

Design-Comparable Effect Sizes in Multiple Baseline Designs: A General Modeling Framework

ERIC Educational Resources Information Center

Pustejovsky, James E.; Hedges, Larry V.; Shadish, William R.

2014-01-01

In single-case research, the multiple baseline design is a widely used approach for evaluating the effects of interventions on individuals. Multiple baseline designs involve repeated measurement of outcomes over time and the controlled introduction of a treatment at different times for different individuals. This article outlines a general…

Imparting Desired Attributes by Optimization in Structural Design

NASA Technical Reports Server (NTRS)

Sobieszczanski-Sobieski, Jaroslaw; Venter, Gerhard

2003-01-01

Commonly available optimization methods typically produce a single optimal design as a Constrained minimum of a particular objective function. However, in engineering design practice it is quite often important to explore as much of the design space as possible with respect to many attributes to find out what behaviors are possible and not possible within the initially adopted design concept. The paper shows that the very simple method of the sum of objectives is useful for such exploration. By geometrical argument it is demonstrated that if every weighting coefficient is allowed to change its magnitude and its sign then the method returns a set of designs that are all feasible, diverse in their attributes, and include the Pareto and non-Pareto solutions, at least for convex cases. Numerical examples in the paper include a case of an aircraft wing structural box with thousands of degrees of freedom and constraints, and over 100 design variables, whose attributes are structural mass, volume, displacement, and frequency. The method is inherently suitable for parallel, coarse-grained implementation that enables exploration of the design space in the elapsed time of a single structural optimization.

Evaluating a Tacit Knowledge Sharing Initiative: A Case Study

ERIC Educational Resources Information Center

Gubbins, Claire; Corrigan, Siobhan; Garavan, Thomas N.; O'Connor, Christy; Leahy, Damien; Long, David; Murphy, Eamonn

2012-01-01

Purpose: This paper aims to present a case study illustrating the issues involved in the tacit knowledge conversion process and to determine whether such conversion delivers value to the organisation in terms of business value and return on investment (ROI). Design/methodology/approach: A single-case multiple baseline participants experimental…

An Interdisciplinary Approach to the Diagnosis and Management of a Complex Case of Postencephalitic Behavioral Disorder.

ERIC Educational Resources Information Center

Fialkov, M. Jerome; And Others

1983-01-01

The diagnosis and treatment of a 13-year-old female who manifested postencephalitic behavioral syndrome 9 years after an acute measles infection are described, along with the history of the case. The case illustrates that an interdisciplinary approach using a single-case experimental design can be clinically effective. (SEW)

Does the Well-Being of Individuals with Down Syndrome and Dementia Improve When Using Life Story Books and Rummage Boxes? A Randomized Single Case Series Experiment

ERIC Educational Resources Information Center

Crook, Nicola; Adams, Malcolm; Shorten, Nicola; Langdon, Peter E.

2016-01-01

Background: This study investigated whether a personalized life story book and rummage box enhanced well-being and led to changes in behaviour for people with Down syndrome (DS) who have dementia. Materials and Methods: A randomized single case series design was used with five participants who had DS and a diagnosis of dementia. Participants were…

Small axial compressor technology, volume 1

NASA Technical Reports Server (NTRS)

Holman, F. F.; Kidwell, J. R.; Ware, T. C.

1976-01-01

A scaled single-stage, highly-loaded, axial-flow transonic compressor was tested at speeds from 70 to 110% design equivalent speed to evaluate the effects of scaling compromises and the individual and combined effects of rotor tip running clearance and rotor shroud casing treatment on the overall and blade element performance. At design speed and 1% tip clearance the stage demonstrated an efficiency of 83.2% at 96.4% design flow and a pressure ratio of 1.865. Casing treatment increased design speed surge margin 2.0 points to 12.8%. Overall performance was essentially unchanged. An increase in rotor running clearance to 2.2%, with smooth casing, reduced design speed peak efficiency 5.7 points, flow by 7.4%, pressure ratio to 1.740, and surge margin to 5.4%. Reinstalling casing treatment regained 3.5 points in design speed peak efficiency, 4.7% flow, increased pressure ratio to 1.800 and surge margin to 8.7%.

Design-Filter Selection for H2 Control of Microgravity Isolation Systems: A Single-Degree-of-Freedom Case Study

NASA Technical Reports Server (NTRS)

Hampton, R. David; Whorton, Mark S.

2000-01-01

Many microgravity space-science experiments require active vibration isolation, to attain suitably low levels of background acceleration for useful experimental results. The design of state-space controllers by optimal control methods requires judicious choices of frequency-weighting design filters. Kinematic coupling among states greatly clouds designer intuition in the choices of these filters, and the masking effects of the state observations cloud the process further. Recent research into the practical application of H2 synthesis methods to such problems, indicates that certain steps can lead to state frequency-weighting design-filter choices with substantially improved promise of usefulness, even in the face of these difficulties. In choosing these filters on the states, one considers their relationships to corresponding design filters on appropriate pseudo-sensitivity- and pseudo-complementary-sensitivity functions. This paper investigates the application of these considerations to a single-degree-of-freedom microgravity vibration-isolation test case. Significant observations that were noted during the design process are presented. along with explanations based on the existent theory for such problems.

The Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016 statement.

PubMed

Tate, Robyn L; Perdices, Michael; Rosenkoetter, Ulrike; Shadish, William; Vohra, Sunita; Barlow, David H; Horner, Robert; Kazdin, Alan; Kratochwill, Thomas; McDonald, Skye; Sampson, Margaret; Shamseer, Larissa; Togher, Leanne; Albin, Richard; Backman, Catherine; Douglas, Jacinta; Evans, Jonathan J; Gast, David; Manolov, Rumen; Mitchell, Geoffrey; Nickels, Lyndsey; Nikles, Jane; Ownsworth, Tamara; Rose, Miranda; Schmid, Christopher H; Wilson, Barbara

2016-06-01

We developed a reporting guideline to provide authors with guidance about what should be reported when writing a paper for publication in a scientific journal using a particular type of research design: the single-case experimental design. This report describes the methods used to develop the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016. As a result of 2 online surveys and a 2-day meeting of experts, the SCRIBE 2016 checklist was developed, which is a set of 26 items that authors need to address when writing about single-case research. This article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated. We recommend that the SCRIBE 2016 is used by authors preparing manuscripts describing single-case research for publication, as well as journal reviewers and editors who are evaluating such manuscripts. Reporting guidelines, such as the Consolidated Standards of Reporting Trials (CONSORT) Statement, improve the reporting of research in the medical literature (Turner et al., 2012). Many such guidelines exist and the CONSORT Extension to Nonpharmacological Trials (Boutron et al., 2008) provides suitable guidance for reporting between-groups intervention studies in the behavioral sciences. The CONSORT Extension for N-of-1 Trials (CENT 2015) was developed for multiple crossover trials with single individuals in the medical sciences (Shamseer et al., 2015; Vohra et al., 2015), but there is no reporting guideline in the CONSORT tradition for single-case research used in the behavioral sciences. We developed the Single-Case Reporting guideline In BEhavioural interventions (SCRIBE) 2016 to meet this need. This Statement article describes the methodology of the development of the SCRIBE 2016, along with the outcome of 2 Delphi surveys and a consensus meeting of experts. We present the resulting 26-item SCRIBE 2016 checklist. The article complements the more detailed SCRIBE 2016 Explanation and Elaboration article (Tate et al., 2016) that provides a rationale for each of the items and examples of adequate reporting from the literature. Both these resources will assist authors to prepare reports of single-case research with clarity, completeness, accuracy, and transparency. They will also provide journal reviewers and editors with a practical checklist against which such reports may be critically evaluated. Supplemental materials: http://dx.doi.org/10.1037/arc0000026.supp. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Postpolio Syndrome: Using a Single Case Study

ERIC Educational Resources Information Center

Obringer, S. John; Elrod, G. Franklin

2004-01-01

The purpose of this study was to identify the major characteristics of postpolio syndrome (PPS), investigate physical and psychological limitations, and comprehensively review current medical interventions through a single subject design. The study addresses the symptoms and characteristics, the effect on life style, and the current recommended…

Precision of Curriculum-Based Measurement Reading Data: Considerations for Multiple-Baseline Designs

ERIC Educational Resources Information Center

Klingbeil, David A.; Van Norman, Ethan R.; Nelson, Peter M.

2017-01-01

Single-case designs provide an established technology for evaluating the effects of academic interventions. Researchers interested in studying the long-term effects of reading interventions often use curriculum-based measures of reading (CBM-R) as they possess many of the desirable characteristics for use in a time-series design. The reliability…

Introducing Whole-Systems Design to First-Year Engineering Students with Case Studies

ERIC Educational Resources Information Center

Blizzard, Jackie; Klotz, Leidy; Pradhan, Alok; Dukes, Michael

2012-01-01

Purpose: A whole-systems approach, which seeks to optimize an entire system for multiple benefits, not isolated components for single benefits, is essential to engineering design for radically improved sustainability performance. Based on real-world applications of whole-systems design, the Rocky Mountain Institute (RMI) is developing educational…

A Standardized Mean Difference Effect Size for Multiple Baseline Designs across Individuals

ERIC Educational Resources Information Center

Hedges, Larry V.; Pustejovsky, James E.; Shadish, William R.

2013-01-01

Single-case designs are a class of research methods for evaluating treatment effects by measuring outcomes repeatedly over time while systematically introducing different condition (e.g., treatment and control) to the same individual. The designs are used across fields such as behavior analysis, clinical psychology, special education, and…

Computing tools for implementing standards for single-case designs.

PubMed

Chen, Li-Ting; Peng, Chao-Ying Joanne; Chen, Ming-E

2015-11-01

In the single-case design (SCD) literature, five sets of standards have been formulated and distinguished: design standards, assessment standards, analysis standards, reporting standards, and research synthesis standards. This article reviews computing tools that can assist researchers and practitioners in meeting the analysis standards recommended by the What Works Clearinghouse: Procedures and Standards Handbook-the WWC standards. These tools consist of specialized web-based calculators or downloadable software for SCD data, and algorithms or programs written in Excel, SAS procedures, SPSS commands/Macros, or the R programming language. We aligned these tools with the WWC standards and evaluated them for accuracy and treatment of missing data, using two published data sets. All tools were tested to be accurate. When missing data were present, most tools either gave an error message or conducted analysis based on the available data. Only one program used a single imputation method. This article concludes with suggestions for an inclusive computing tool or environment, additional research on the treatment of missing data, and reasonable and flexible interpretations of the WWC standards. © The Author(s) 2015.

Preparing for imported Ebola cases in Israel, 2014 to 2015.

PubMed

Brosh-Nissimov, Tal; Poles, Lion; Kassirer, Micha; Singer, Roee; Kaliner, Ehud; Shriki, Dikla Dahan; Anis, Emilia; Fogel, Itay; Engelhard, Dan; Grotto, Itamar

2015-01-01

During the current outbreak of Ebola virus disease (EVD) in West Africa, preventing exportation of the disease posed many challenges for economically more developed countries. In Israel, although the risk of importing single cases was assumed to be low, the implications of local transmission were great. This article describes the EVD preparedness plan of the Israeli Ministry of Health. Key elements were a sensitive case definition, designation of a single treatment centre for suspected and confirmed cases, construction of a mobile unit using customised negative-pressure tents and a vigorous national training programme. There were no patients with EVD in Israel, but a few suspected cases were assessed. The Israeli plan may provide a template for emergency infectious disease response in other geographically small countries.

[The Munich Attachment and Effectiveness Study: Study Design and a Case Example].

PubMed

Hörz-Sagstetter, Susanne; Minow, Anna-Rahel; Erhardt, Ingrid; Barten-Hohn, Julia; Denscherz, Claudia; Buchheim, Anna; Taubner, Svenja; Mertens, Wolfgang

2016-03-01

The "Munich Attachment and Effectiveness Study" is a prospective psychotherapy study examining process and outcome of psychoanalytic psychotherapies. The study design and results are exemplified in a single case. At 6 points in time audio-taped and transcribed therapy sessions are evaluated using process instruments (e. g. Psychotherapy Process Q-Set PQS) and interviews (e. g. Operationalized Psychodynamic Diagnostics OPD, Heidelberg Structural Change Scale HSCS, Adult Attachment Interview AAI). In the single case, findings from the psychotherapeutic process (e. g. "therapist is empathic" according to PQS) complement the achieved changes. 5 HSCS problem foci reached level of "restructuring", on the Reflective Functioning Scale a marked change of RF took place and the attachment classification changed over time. The instruments employed in this study corresponded well in assessing change processes in spite of differing theoretical background. © Georg Thieme Verlag KG Stuttgart · New York.

Methodological standards in single-case experimental design: Raising the bar.

PubMed

Ganz, Jennifer B; Ayres, Kevin M

2018-04-12

Single-case experimental designs (SCEDs), or small-n experimental research, are frequently implemented to assess approaches to improving outcomes for people with disabilities, particularly those with low-incidence disabilities, such as some developmental disabilities. SCED has become increasingly accepted as a research design. As this literature base is needed to determine what interventions are evidence-based practices, the acceptance of SCED has resulted in increased critiques with regard to methodological quality. Recent trends include recommendations from a number of expert scholars and institutions. The purpose of this article is to summarize the recent history of methodological quality considerations, synthesize the recommendations found in the SCED literature, and provide recommendations to researchers designing SCEDs with regard to essential and aspirational standards for methodological quality. Conclusions include imploring SCED to increase the quality of their experiments, with particular consideration regarding the applied nature of SCED research to be published in Research in Developmental Disabilities and beyond. Copyright © 2018 Elsevier Ltd. All rights reserved.

Systematic review of sensory integration therapy for individuals with disabilities: Single case design studies.

PubMed

Leong, H M; Carter, Mark; Stephenson, Jennifer

2015-12-01

Sensory integration therapy (SIT) is a controversial intervention that is widely used for people with disabilities. Systematic analysis was conducted on the outcomes of 17 single case design studies on sensory integration therapy for people with, or at-risk of, a developmental or learning disability, disorder or delay. An assessment of the quality of methodology of the studies found most used weak designs and poor methodology, with a tendency for higher quality studies to produce negative results. Based on limited comparative evidence, functional analysis-based interventions for challenging behavior were more effective that SIT. Overall the studies do not provide convincing evidence for the efficacy of sensory integration therapy. Given the findings of the present review and other recent analyses it is advised that the use of SIT be limited to experimental contexts. Issues with the studies and possible improvements for future research are discussed including the need to employ designs that allow for adequate demonstration of experimental control. Copyright © 2015 Elsevier Ltd. All rights reserved.

Case-control analysis in highway safety: Accounting for sites with multiple crashes.

PubMed

Gross, Frank

2013-12-01

There is an increased interest in the use of epidemiological methods in highway safety analysis. The case-control and cohort methods are commonly used in the epidemiological field to identify risk factors and quantify the risk or odds of disease given certain characteristics and factors related to an individual. This same concept can be applied to highway safety where the entity of interest is a roadway segment or intersection (rather than a person) and the risk factors of interest are the operational and geometric characteristics of a given roadway. One criticism of the use of these methods in highway safety is that they have not accounted for the difference between sites with single and multiple crashes. In the medical field, a disease either occurs or it does not; multiple occurrences are generally not an issue. In the highway safety field, it is necessary to evaluate the safety of a given site while accounting for multiple crashes. Otherwise, the analysis may underestimate the safety effects of a given factor. This paper explores the use of the case-control method in highway safety and two variations to account for sites with multiple crashes. Specifically, the paper presents two alternative methods for defining cases in a case-control study and compares the results in a case study. The first alternative defines a separate case for each crash in a given study period, thereby increasing the weight of the associated roadway characteristics in the analysis. The second alternative defines entire crash categories as cases (sites with one crash, sites with two crashes, etc.) and analyzes each group separately in comparison to sites with no crashes. The results are also compared to a "typical" case-control application, where the cases are simply defined as any entity that experiences at least one crash and controls are those entities without a crash in a given period. In a "typical" case-control design, the attributes associated with single-crash segments are weighted the same as the attributes of segments with multiple crashes. The results support the hypothesis that the "typical" case-control design may underestimate the safety effects of a given factor compared to methods that account for sites with multiple crashes. Compared to the first alternative case definition (where multiple crash segments represent multiple cases) the results from the "typical" case-control design are less pronounced (i.e., closer to unity). The second alternative (where case definitions are constructed for various crash categories and analyzed separately) provides further evidence that sites with single and multiple crashes should not be grouped together in a case-control analysis. This paper indicates a clear need to differentiate sites with single and multiple crashes in a case-control analysis. While the results suggest that sites with multiple crashes can be accounted for using a case-control design, further research is needed to determine the optimal method for addressing this issue. This paper provides a starting point for that research. Copyright © 2012 Elsevier Ltd. All rights reserved.

Methods for Assessment of Species Richness and Occupancy Across Space, Time, Taxonomic Groups, and Ecoregions

DTIC Science & Technology

2017-03-26

logistic constraints and associated travel time between points in the central and western Great Basin. The geographic and temporal breadth of our...surveys (MacKenzie and Royle 2005). In most cases, less time is spent traveling between sites on a given day when the single-day design is implemented...with the single-day design (110 hr). These estimates did not include return- travel time , which did not limit sampling effort. As a result, we could

27 CFR 478.11 - Meaning of terms.

Code of Federal Regulations, 2012 CFR

2012-04-01

... than one shot, without manual reloading, by a single function of the trigger. The term shall also... than an antique firearm. The term shall not include (a) any shotgun shot or pellet not designed for use as the single, complete projectile load for one shotgun hull or casing, nor (b) any unloaded, non...

27 CFR 478.11 - Meaning of terms.

Code of Federal Regulations, 2011 CFR

2011-04-01

... than one shot, without manual reloading, by a single function of the trigger. The term shall also... than an antique firearm. The term shall not include (a) any shotgun shot or pellet not designed for use as the single, complete projectile load for one shotgun hull or casing, nor (b) any unloaded, non...

27 CFR 478.11 - Meaning of terms.

Code of Federal Regulations, 2010 CFR

2010-04-01

... than one shot, without manual reloading, by a single function of the trigger. The term shall also... than an antique firearm. The term shall not include (a) any shotgun shot or pellet not designed for use as the single, complete projectile load for one shotgun hull or casing, nor (b) any unloaded, non...

27 CFR 478.11 - Meaning of terms.

Code of Federal Regulations, 2014 CFR

2014-04-01

... than one shot, without manual reloading, by a single function of the trigger. The term shall also... than an antique firearm. The term shall not include (a) any shotgun shot or pellet not designed for use as the single, complete projectile load for one shotgun hull or casing, nor (b) any unloaded, non...

27 CFR 478.11 - Meaning of terms.

Code of Federal Regulations, 2013 CFR

2013-04-01

... than one shot, without manual reloading, by a single function of the trigger. The term shall also... than an antique firearm. The term shall not include (a) any shotgun shot or pellet not designed for use as the single, complete projectile load for one shotgun hull or casing, nor (b) any unloaded, non...

Multilayer Nanoporous Graphene Membranes for Water Desalination.

PubMed

Cohen-Tanugi, David; Lin, Li-Chiang; Grossman, Jeffrey C

2016-02-10

While single-layer nanoporous graphene (NPG) has shown promise as a reverse osmosis (RO) desalination membrane, multilayer graphene membranes can be synthesized more economically than the single-layer material. In this work, we build upon the knowledge gained to date toward single-layer graphene to explore how multilayer NPG might serve as a RO membrane in water desalination using classical molecular dynamic simulations. We show that, while multilayer NPG exhibits similarly promising desalination properties to single-layer membranes, their separation performance can be designed by manipulating various configurational variables in the multilayer case. This work establishes an atomic-level understanding of the effects of additional NPG layers, layer separation, and pore alignment on desalination performance, providing useful guidelines for the design of multilayer NPG membranes.

A Qualitative Case Study of the Bilingual Teacher Shortage in One Texas School District

ERIC Educational Resources Information Center

Kennedy, Barbara H.

2013-01-01

The purpose of this study was to examine how stakeholders in one Texas school district perceive, experience, and respond to the Spanish bilingual teacher shortage. The research design was qualitative with an exploratory, single case study approach. The case study school district was a mid-sized suburban district in Texas that utilized a dual…

A novel approach to exploring potential interactions among single-nucleotide polymorphisms of inflammation genes in gliomagenesis: an exploratory case-only study.

PubMed

Amirian, E Susan; Scheurer, Michael E; Liu, Yanhong; D'Amelio, Anthony M; Houlston, Richard S; Etzel, Carol J; Shete, Sanjay; Swerdlow, Anthony J; Schoemaker, Minouk J; McKinney, Patricia A; Fleming, Sarah J; Muir, Kenneth R; Lophatananon, Artitaya; Bondy, Melissa L

2011-08-01

Despite extensive research on the topic, glioma etiology remains largely unknown. Exploration of potential interactions between single-nucleotide polymorphisms (SNP) of immune genes is a promising new area of glioma research. The case-only study design is a powerful and efficient design for exploring possible multiplicative interactions between factors that are independent of one another. The purpose of our study was to use this exploratory design to identify potential pair wise SNP-SNP interactions from genes involved in several different immune-related pathways for investigation in future studies. The study population consisted of two case groups: 1,224 histologic confirmed, non-Hispanic white glioma cases from the United States and a validation population of 634 glioma cases from the United Kingdom. Polytomous logistic regression, in which one SNP was coded as the outcome and the other SNP was included as the exposure, was utilized to calculate the ORs of the likelihood of cases simultaneously having the variant alleles of two different SNPs. Potential interactions were examined only between SNPs located in different genes or chromosomes. Using this data mining strategy, we found 396 significant SNP-SNP interactions among polymorphisms of immune-related genes that were present in both the U.S. and U.K. study populations. This exploratory study was conducted for the purpose of hypothesis generation, and thus has provided several new hypotheses that can be tested using traditional case-control study designs to obtain estimates of risk. This is the first study, to our knowledge, to take this novel approach to identifying SNP-SNP interactions relevant to glioma etiology. ©2011 AACR.

Perioprosthetic and Implant-Supported Rehabilitation of Complex Cases: Clinical Management and Timing Strategy.

PubMed

Landi, Luca; Piccinelli, Stefano; Raia, Roberto; Marinotti, Fabio; Manicone, Paolo Francesco

2016-01-01

Treatment of complex perioprosthetic cases is one of the clinical challenges of everyday practice. Only a complete and thorough diagnostic setup may allow the clinician to formulate a realistic prognosis to select the abutments to support prosthetic rehabilitation. Clinical, radiographic, or laboratory parameters used separately are useless to correctly assign a reliable prognosis to single teeth except in the case of a clearly hopeless tooth. Therefore, it is crucial to gather the greatest quantity of data to determine the role that every single element can play in the prosthetic rehabilitation of the case. The following report deals with the management of a multidisciplinary periodontally compromised case in which a treatment strategy and chronology were designed to reach clinical predictability while reducing the duration of the therapy.

Single Case Design Elements in Text Comprehension Research for Students with Developmental Disabilities

ERIC Educational Resources Information Center

Snyder, Sara M.; Knight, Victoria F.; Ayres, Kevin M.; Mims, Pamela J.; Sartini, Emily C.

2017-01-01

Recently researchers have begun exploring the efficacy of interventions designed to improve text comprehension skills for students with developmental disabilities (DD). Text comprehension is essential for understanding academic content as students with disabilities make progress in the general education curriculum. This article focuses on single…

Research Training Needs of Scientist-Practitioners: Implications for Counselor Education

ERIC Educational Resources Information Center

Peterson, Christina Hamme; Hall, Sean B.; Buser, Juleen K.

2016-01-01

Counselors (N = 911) reported the research skills needed for practice and subsequent research training needs. Findings indicate that counselors have a high need for research skills at work, but training needs differ significantly by counselor type. Recommendations include increasing emphasis on single-case design, survey design, and widely…

Exploring Academics' Approaches to Managing Team Assessment

ERIC Educational Resources Information Center

Augar, Naomi; Woodley, Carolyn J.; Whitefield, Despina; Winchester, Maxwell

2016-01-01

Purpose: The purpose of this paper is to develop an understanding of academics' approaches to managing team assessment at an Australian University with a view to informing policy development and assessment design. Design/methodology/approach: The research was conducted using a single exploratory case study approach focussing on the team assessment…

The Caterpillar Game: A Classroom Management System

ERIC Educational Resources Information Center

Floress, Margaret T.; Rock, Angela L.; Hailemariam, Assegedech

2017-01-01

A single-case experimental design was used to evaluate the effects of the Caterpillar Game, a classroom management system, on disruptive behavior in a general education first grade classroom. A multiple baseline design across settings was used to evaluate changes in student disruptive behavior and teacher praise. When the Caterpillar Game was…

Estimating Slope and Level Change in N = 1 Designs

ERIC Educational Resources Information Center

Solanas, Antonio; Manolov, Rumen; Onghena, Patrick

2010-01-01

The current study proposes a new procedure for separately estimating slope change and level change between two adjacent phases in single-case designs. The procedure eliminates baseline trend from the whole data series before assessing treatment effectiveness. The steps necessary to obtain the estimates are presented in detail, explained, and…

Identifying Effective Treatments from a Brief Experimental Analysis: Using a Single-Case Design Elements To Aid Decision Making.

ERIC Educational Resources Information Center

Martens, Brian K.; Eckert, Tanya L.; Bradley, Tracy A.; Ardoin, Scott P.

1999-01-01

Discusses the benefits of using brief experimental analysis to aid in treatment selection, identifies the forms of treatment that are most appropriate for this type of analysis, and describes key design elements for comparing treatments. Presents a study demonstrating the use of these design elements to identify an effective intervention for two…

Technology, design, simulation, and evaluation for SEP-hardened circuits

NASA Technical Reports Server (NTRS)

Adams, J. R.; Allred, D.; Barry, M.; Rudeck, P.; Woodruff, R.; Hoekstra, J.; Gardner, H.

1991-01-01

This paper describes the technology, design, simulation, and evaluation for improvement of the Single Event Phenomena (SEP) hardness of gate-array and SRAM cells. Through the use of design and processing techniques, it is possible to achieve an SEP error rate less than 1.0 x 10(exp -10) errors/bit-day for a 9O percent worst-case geosynchronous orbit environment.

Brain MRI volumetry in a single patient with mild traumatic brain injury.

PubMed

Ross, David E; Castelvecchi, Cody; Ochs, Alfred L

2013-01-01

This letter to the editor describes the case of a 42 year old man with mild traumatic brain injury and multiple neuropsychiatric symptoms which persisted for a few years after the injury. Initial CT scans and MRI scans of the brain showed no signs of atrophy. Brain volume was measured using NeuroQuant®, an FDA-approved, commercially available software method. Volumetric cross-sectional (one point in time) analysis also showed no atrophy. However, volumetric longitudinal (two points in time) analysis showed progressive atrophy in several brain regions. This case illustrated in a single patient the principle discovered in multiple previous group studies, namely that the longitudinal design is more powerful than the cross-sectional design for finding atrophy in patients with traumatic brain injury.

The Impact of Psychotherapeutic Reiki on Anxiety and Mindfulness: A Single-Case Design

ERIC Educational Resources Information Center

Webster, Lindsay C.

2016-01-01

Reiki healing is one of several complementary and integrative therapies becoming increasingly prevalent in mental health counseling. It has been identified in the medical field for its usefulness in treating anxiety, depression, distress, and pain but has rarely been studied for its counseling impact on client wellness. I conducted single-case…

Formative Assessment Using Direct Behavior Ratings: Evaluating Intervention Effects of Daily Behavior Report Cards

ERIC Educational Resources Information Center

Sims, Wesley A.; Riley-Tillman, Chris; Cohen, Daniel R.

2017-01-01

This study examined the treatment sensitivity of "Direct Behavior Rating-Single Item Scales" (DBR-SIS) in response to an evidence-based intervention delivered in a single-case, multiple-baseline design. DBR-SIS was used as a formative assessment in conjunction with a frequently used intervention in schools, a Daily Behavior Report Card…

The Role of the Senior Student Affairs Officer in Creating and Sustaining a Culture of Assessment: A Case Study

ERIC Educational Resources Information Center

Ridgeway, Lindsey McKinney

2014-01-01

The purpose of this research study was to examine the role of the senior student affairs officer (SSAO) in promoting assessment practice within the Division of Student Life at Randal University. A qualitative, single-case study research design was employed to conduct this study. The case for this investigation was the Vice President for Student…

Goal Structured Notation in a Radiation Hardening Safety Case for COTS-Based Spacecraft

NASA Technical Reports Server (NTRS)

Witulski, Arthur; Austin, Rebekah; Reed, Robert; Karsai, Gabor; Mahadevan, Nag; Sierawski, Brian; Evans, John; LaBel, Ken

2016-01-01

A systematic approach is presented to constructing a radiation assurance case using Goal Structured Notation (GSN) for spacecraft containing COTS parts. The GSN paradigm is applied to an SRAM single-event upset experiment board designed to fly on a CubeSat November 2016. Construction of a radiation assurance case without use of hardened parts or extensive radiation testing is discussed.

Optimal Aerodynamic Design of Conventional and Coaxial Helicopter Rotors in Hover and Forward Flight

DTIC Science & Technology

2015-12-28

graduate career a fun and (at times) productive pursuit. I owe a great deal to my parents , Kevin and Lisa, for their unconditional support. Finally...forward flight. Orchard and Newman [6] investigated fundamental design features of compound helicopters using a wing, a single rotor, and a propul- sor... style compound. For the case considered here, the coaxial rotors are unconstrained in lift offset. If a wing were used in a case that also included a lift

Case Series in Cognitive Neuropsychology: Promise, Perils and Proper Perspective

PubMed Central

Rapp, Brenda

2012-01-01

Schwartz & Dell (2010) advocated for a major role for case series investigations in cognitive neuropsychology. They defined the key features of this approach and presented a number of arguments and examples illustrating the benefits of case series studies and their contribution to computational cognitive neuropsychology. In the Special Issue on “Case Series in Cognitive Neuropsychology” there are six commentaries on Schwartz and Dell (2010) as well as a response to the six commentaries by Dell and Schwartz. In this paper, I provide a brief summary of the key points made in Schwartz and Dell (2010) and I review the promise and perils of case series design as revealed by the six commentaries. I conclude by placing the set of papers within a broader perspective, providing some clarification of the historical record on case series and single case approaches, raising some cautionary notes for case series studies and situating both case series and single case approaches within the larger context of theory development in the cognitive sciences. PMID:22746685

Teacher and Administrator Views on School Principals' Accountability

ERIC Educational Resources Information Center

Argon, Turkan

2015-01-01

The current study aims to identify teacher and administrator views regarding primary school principals' accountability. The case study model, a qualitative research method, was adopted in the study using the holistic single-case design. The working group was composed of a total of 56 individuals, 42 teachers and 14 administrators (11 principals…

The Influence of Lean on K-12 District Management: A Case Study

ERIC Educational Resources Information Center

Brown, Beverly

2011-01-01

For decades, policymakers and educators have focused on public school equity and adequacy, while paying little attention to efficiency. This qualitative single case study was designed to capture explicit information about Lean management, operations, and culture in a K-12 Michigan school district engaged in Lean training and implementation for a…

A new design of indirectly heated cathode based strip type electron gun.

PubMed

Maiti, Namita; Lijeesh, K; Barve, U D; Quadri, Nishad; Tembhare, G U; Mukherjee, S; Thakur, K B; Das, A K

2013-08-01

A new design of indirectly heated solid cathode based electron gun (200 kW, 45 kV, 270° bent strip type electron gun) has been presented. The design issue addressed is the uniformity of temperature on the solid cathode using (a) a multi-segmented filament with variable height as the primary heat source and (b) trapezoidal shaped single long filament as the primary heat source. The proposed design in this paper is based on computer simulation and validated by extensive experimentations. The design emphasis is on maintaining uniform temperature on the solid cathode. The designed multi-segment filament and the single long filament provide a temperature uniformity on the solid cathode of about 250 K and 110 K, respectively. The better temperature uniformity inspite of the thermal expansion, in case of a single long filament tightly clamped at two ends, has been possible due to shaping of the single filament with a number of constituent sections such that the thermal expansion of different sections forming the actual filament takes care of not only the mechanical stability but also does not affect the emitting surface of the filament. Experiments show that the modified design achieves a one to one correspondence of the solid cathode length and the electron beam length emitted from the solid cathode.

Pedagogical Design Capacity and Underlying Knowledge Base of Curriculum Materials Use of a Hong Kong English Teacher

ERIC Educational Resources Information Center

Chong, Ivan

2016-01-01

Using "pedagogical design capacity" ("PDC") as the conceptual framework, this single-case study examines how an English teacher in Hong Kong perceives and mobilizes curriculum materials to teach reading comprehension to secondary one students in two stages of implementation. Relying on data collected from semi-structured…

Video Modeling for Children and Adolescents with Autism Spectrum Disorder: A Meta-Analysis

ERIC Educational Resources Information Center

Thompson, Teresa Lynn

2014-01-01

The objective of this research was to conduct a meta-analysis to examine existing research studies on video modeling as an effective teaching tool for children and adolescents diagnosed with Autism Spectrum Disorder (ASD). Study eligibility criteria included (a) single case research design using multiple baselines, alternating treatment designs,…

A Meta-Analysis of Educator Training to Improve Implementation of Interventions for Students with Disabilities

ERIC Educational Resources Information Center

Brock, Matthew E.; Carter, Erik W.

2017-01-01

Teachers and paraprofessionals need effective training to improve their implementation of interventions for students with disabilities. Reviews of the single-case design literature have identified some features associated with effective training for these educators, but the group-design literature has received little attention. This meta-analysis…

The Modeling, Simulation and Comparison of Interconnection Networks for Parallel Processing.

DTIC Science & Technology

1987-12-01

performs better at a lower hardware cost than do the single stage cube and mesh networks. As a result, the designer of a paralll pro- cessing system is...attempted, and in most cases succeeded, in designing and implementing faster. more powerful systems. Due to design innovations and technological advances...largely to the computational complexity of the algorithms executed. In the von Neumann machine, instructions must be executed in a sequential manner. Design

Development of single-copy nuclear intron markers for species-level phylogenetics: Case study with Paullinieae (Sapindaceae).

PubMed

Chery, Joyce G; Sass, Chodon; Specht, Chelsea D

2017-09-01

We developed a bioinformatic pipeline that leverages a publicly available genome and published transcriptomes to design primers in conserved coding sequences flanking targeted introns of single-copy nuclear loci. Paullinieae (Sapindaceae) is used to demonstrate the pipeline. Transcriptome reads phylogenetically closer to the lineage of interest are aligned to the closest genome. Single-nucleotide polymorphisms are called, generating a "pseudoreference" closer to the lineage of interest. Several filters are applied to meet the criteria of single-copy nuclear loci with introns of a desired size. Primers are designed in conserved coding sequences flanking introns. Using this pipeline, we developed nine single-copy nuclear intron markers for Paullinieae. This pipeline is highly flexible and can be used for any group with available genomic and transcriptomic resources. This pipeline led to the development of nine variable markers for phylogenetic study without generating sequence data de novo.

A Study on the Failure of Conventional Deterrence: The Case Study of the Bombardment of Yeonpyeong in 2010

DTIC Science & Technology

2016-12-01

December 2016 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE A STUDY ON THE FAILURE OF CONVENTIONAL DETERRENCE: THE CASE ...Approved for public release. Distribution is unlimited A STUDY ON THE FAILURE OF CONVENTIONAL DETERRENCE: THE CASE STUDY OF THE BOMBARDMENT OF...necessary to analyze these diverse elements comprehensively. E. RESEARCH DESIGN This thesis focuses on a single case study about the bombardment of

School-based peer-related social competence interventions for children with autism spectrum disorder: a meta-analysis and descriptive review of single case research design studies.

PubMed

Whalon, Kelly J; Conroy, Maureen A; Martinez, Jose R; Werch, Brittany L

2015-06-01

The purpose of this review was to critically examine and summarize the impact of school-based interventions designed to facilitate the peer-related social competence of children with autism spectrum disorder (ASD). Reviewed studies employed a single-case experimental design, targeted peer-related social competence, included children 3-12 years old with an ASD, and took place in school settings. Articles were analyzed descriptively and using the evaluative method to determine study quality. Additionally, effect size estimates were calculated using nonoverlap of all pairs method and Tau-U. A total of 37 studies including 105 children were reviewed. Overall, ES estimates ranged from weak to strong, but on average, the reviewed interventions produced a moderate to strong effect, and quality ratings were generally in the acceptable to high range. Findings suggest that children with ASD can benefit from social skill interventions implemented with peers in school settings.

Self-Administered Cued Naming Therapy: A Single-Participant Investigation of a Computer-Based Therapy Program Replicated in Four Cases

ERIC Educational Resources Information Center

Ramsberger, Gail; Marie, Basem

2007-01-01

Purpose: This study examined the benefits of a self-administered, clinician-guided, computer-based, cued naming therapy. Results of intense and nonintense treatment schedules were compared. Method: A single-participant design with multiple baselines across behaviors and varied treatment intensity for 2 trained lists was replicated over 4…

Goal Structuring Notation in a Radiation Hardening Assurance Case for COTS-Based Spacecraft

NASA Technical Reports Server (NTRS)

Witulski, Arthur; Austin, Rebekah; Evans, John; Mahadevan, Nag; Karsai, Gabor; Sierawski, Brian; LaBel, Ken; Reed, Robert; Schrimpf, Ron

2016-01-01

A systematic approach is presented to constructing a radiation assurance case using Goal Structuring Notation (GSN) for spacecraft containing commercial-off-the-shelf (COTS) parts. The GSN paradigm is applied to an SRAM single-event upset experiment board designed to fly on a CubeSat November 2016. Construction of a radiation assurance case without use of hardened parts or extensive radiation testing is discussed.

Assay Design Affects the Interpretation of T-Cell Receptor Gamma Gene Rearrangements

PubMed Central

Cushman-Vokoun, Allison M.; Connealy, Solomon; Greiner, Timothy C.

2010-01-01

Interpretation of capillary electrophoresis results derived from multiplexed fluorochrome-labeled primer sets can be complicated by small peaks, which may be incorrectly interpreted as clonal T-cell receptor-γ gene rearrangements. In this report, different assay designs were used to illustrate how design may adversely affect specificity. Ten clinical cases, with subclonal peaks containing one of the two infrequently used joining genes, were identified with a tri-color, one-tube assay. The DNA was amplified with the same NED fluorochrome on all three joining primers, first combined (one-color assay) and then amplified separately using a single NED-labeled joining primer. The single primer assay design shows how insignificant peaks could easily be wrongly interpreted as clonal T-cell receptor-γ gene rearrangements. Next, the performance of the one-tube assay was compared with the two-tube BIOMED-2-based TCRG Gene Clonality Assay in a series of 44 cases. Whereas sensitivity was similar between the two methods (92.9% vs. 96.4%; P = 0.55), specificity was significantly less in the BIOMED-2 assay (87.5% vs. 56.3%; P = 0.049) when a 2× ratio was used to define clonality. Specificity was improved to 81.3% by the use of a 5× peak height ratio (P = 0.626). These findings illustrate how extra caution is needed in interpreting a design with multiple, separate distributions, which is more difficult to interpret than a single distribution assay. PMID:20959612

30 CFR 250.292 - What must the DWOP contain?

Code of Federal Regulations, 2010 CFR

2010-07-01

... description and schematic of the typical wellbore, casing, and completion; (b) Structural design, fabrication... systems that constitute all or part of a single project development covered by the DWOP; (j) Flow...

An Electronics "Unit Laboratory"

ERIC Educational Resources Information Center

Davies, E. R.; Penton, S. J.

1976-01-01

Describes a laboratory teaching technique in which a single topic (in this case, bipolar junction transistors) is studied over a period of weeks under the supervision of one staff member, who also designs the laboratory work. (MLH)

Psychological therapy for psychogenic amnesia: Successful treatment in a single case study.

PubMed

Cassel, Anneli; Humphreys, Kate

2016-01-01

Psychogenic amnesia is widely understood to be a memory impairment of psychological origin that occurs as a response to severe stress. However, there is a paucity of evidence regarding the effectiveness of psychological therapy approaches in the treatment of this disorder. The current article describes a single case, "Ben", who was treated with formulation-driven psychological therapy using techniques drawn from cognitive behavioural therapy (CBT) and acceptance and commitment therapy (ACT) for psychogenic amnesia. Before treatment, Ben exhibited isolated retrograde and anterograde memory impairments. He received 12 therapy sessions that targeted experiential avoidance followed by two review sessions, six weeks and five months later. Ben's retrograde and anterograde memory impairments improved following therapy to return to within the "average" to "superior" ranges, which were maintained at follow-up. Further experimental single case study designs and larger group studies are required to advance the understanding of the effectiveness and efficacy of psychological therapy for psychogenic amnesia.

Analysis and meta-analysis of single-case designs: an introduction.

PubMed

Shadish, William R

2014-04-01

The last 10 years have seen great progress in the analysis and meta-analysis of single-case designs (SCDs). This special issue includes five articles that provide an overview of current work on that topic, including standardized mean difference statistics, multilevel models, Bayesian statistics, and generalized additive models. Each article analyzes a common example across articles and presents syntax or macros for how to do them. These articles are followed by commentaries from single-case design researchers and journal editors. This introduction briefly describes each article and then discusses several issues that must be addressed before we can know what analyses will eventually be best to use in SCD research. These issues include modeling trend, modeling error covariances, computing standardized effect size estimates, assessing statistical power, incorporating more accurate models of outcome distributions, exploring whether Bayesian statistics can improve estimation given the small samples common in SCDs, and the need for annotated syntax and graphical user interfaces that make complex statistics accessible to SCD researchers. The article then discusses reasons why SCD researchers are likely to incorporate statistical analyses into their research more often in the future, including changing expectations and contingencies regarding SCD research from outside SCD communities, changes and diversity within SCD communities, corrections of erroneous beliefs about the relationship between SCD research and statistics, and demonstrations of how statistics can help SCD researchers better meet their goals. Copyright © 2013 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

Two-Year College Faculty and Administrator Thoughts about the Transition to a Learning-Centered College

ERIC Educational Resources Information Center

Brackin, Mike

2012-01-01

A single qualitative case study design was used to determine the opinions of administrators and faculty from a community college that is considered to be transitioning to a learning-centered college. The researcher conducted the case study to describe, explain, and evaluate the phenomenon. The researcher also recorded facilitators or roadblocks…

Adult Financial Literacy Education and Latina Learners: A Qualitative Case Study

ERIC Educational Resources Information Center

Sprow, Karin Millard

2010-01-01

This qualitative study used a case study design to explore the teaching and learning that takes place in an adult Latino financial literacy education that was aimed specifically at Latina single mothers. The theoretical framework of the study was informed by a blend of critical and Latina feminist sociocultural adult learning perspectives, as well…

A Case Study of Extensive Reading with an Unmotivated L2 Reader

ERIC Educational Resources Information Center

Ro, Eunseok

2013-01-01

Extensive reading is gaining credibility as an effective way of boosting students' affect especially in an English as a Foreign Language (EFL) context where access to a second language (L2) input is minimal. This study uses a pattern-matching, single case study research design to examine an adult reader's motivation and anxiety shifts towards…

The School Principal as Change Agent: An Explanatory Case Study.

ERIC Educational Resources Information Center

McLaughlin, Lisa; Hyle, Adrienne E.

This single-site case study was designed to investigate ways in which a principal considers the individual needs of faculty members when promoting a particular change, as perceived by faculty and staff. Four research questions were addressed: (1) How does a principal create a context for change? (2) Is school culture acknowledged as an integral…

"It Takes a Village": A Case Study of Positive Behavioral Interventions and Supports Implementation in an Exemplary Urban Middle School

ERIC Educational Resources Information Center

Goodman-Scott, Emily; Hays, Danica G.; Cholewa, Blaire E.

2018-01-01

Positive Behavioral Interventions and Supports (PBIS) is a widely implemented, culturally responsive framework using prevention and intervention activities to promote a safe school climate and positive academic and behavioral student outcomes. Using a qualitative single-case study design, authors provide a rich description of PBIS implementation…

Computations on Wings With Full-Span Oscillating Control Surfaces Using Navier-Stokes Equations

NASA Technical Reports Server (NTRS)

Guruswamy, Guru P.

2013-01-01

A dual-level parallel procedure is presented for computing large databases to support aerospace vehicle design. This procedure has been developed as a single Unix script within the Parallel Batch Submission environment utilizing MPIexec and runs MPI based analysis software. It has been developed to provide a process for aerospace designers to generate data for large numbers of cases with the highest possible fidelity and reasonable wall clock time. A single job submission environment has been created to avoid keeping track of multiple jobs and the associated system administration overhead. The process has been demonstrated for computing large databases for the design of typical aerospace configurations, a launch vehicle and a rotorcraft.

Error detection and correction unit with built-in self-test capability for spacecraft applications

NASA Technical Reports Server (NTRS)

Timoc, Constantin

1990-01-01

The objective of this project was to research and develop a 32-bit single chip Error Detection and Correction unit capable of correcting all single bit errors and detecting all double bit errors in the memory systems of a spacecraft. We designed the 32-bit EDAC (Error Detection and Correction unit) based on a modified Hamming code and according to the design specifications and performance requirements. We constructed a laboratory prototype (breadboard) which was converted into a fault simulator. The correctness of the design was verified on the breadboard using an exhaustive set of test cases. A logic diagram of the EDAC was delivered to JPL Section 514 on 4 Oct. 1988.

Wind Tunnel Data Fusion and Immersive Visualization: A Case Study

NASA Technical Reports Server (NTRS)

Severance, Kurt; Brewster, Paul; Lazos, Barry; Keefe, Daniel

2001-01-01

This case study describes the process of fusing the data from several wind tunnel experiments into a single coherent visualization. Each experiment was conducted independently and was designed to explore different flow features around airplane landing gear. In the past, it would have been very difficult to correlate results from the different experiments. However, with a single 3-D visualization representing the fusion of the three experiments, significant insight into the composite flowfield was observed that would have been extremely difficult to obtain by studying its component parts. The results are even more compelling when viewed in an immersive environment.

Single-Mode VCSELs

NASA Astrophysics Data System (ADS)

Larsson, Anders; Gustavsson, Johan S.

The only active transverse mode in a truly single-mode VCSEL is the fundamental mode with a near Gaussian field distribution. A single-mode VCSEL produces a light beam of higher spectral purity, higher degree of coherence and lower divergence than a multimode VCSEL and the beam can be more precisely shaped and focused to a smaller spot. Such beam properties are required in many applications. In this chapter, after discussing applications of single-mode VCSELs, we introduce the basics of fields and modes in VCSELs and review designs implemented for single-mode emission from VCSELs in different materials and at different wavelengths. This includes VCSELs that are inherently single-mode as well as inherently multimode VCSELs where higher-order modes are suppressed by mode selective gain or loss. In each case we present the current state-of-the-art and discuss pros and cons. At the end, a specific example with experimental results is provided and, as a summary, the most promising designs based on current technologies are identified.

Embedded Meta-Material Antennas

DTIC Science & Technology

2009-01-31

influence of the overall capacitance . Based on the tunable SRRs, we designed a tunable loop antenna with SRRs and HPTs as tuning elements. In this case, we...are those of the authors) and should not be construed as an official Department of the Army position, policy or decision, unless so designated by...single aperture, which can provide significant miniaturization and flexibility to the entire system. To design such miniaturized antennas, new materials

Goal Structuring Notation in a Radiation Hardening Assurance Case for COTS-Based Spacecraft

NASA Technical Reports Server (NTRS)

Witulski, A.; Austin, R.; Evans, J.; Mahadevan, N.; Karsai, G.; Sierawski, B.; LaBel, K.; Reed, R.; Schrimpf, R.

2016-01-01

A systematic approach is presented to constructing a radiation assurance case using Goal Structuring Notation (GSN) for spacecraft containing COTS parts. The GSN paradigm is applied to an SRAM single-event upset experiment board designed to fly on a CubeSat in January 2017. A custom software language for development of a GSN assurance case is under development at Vanderbilt. Construction of a radiation assurance case without use of hardened parts or extensive radiation testing is discussed.

Utilising family-based designs for detecting rare variant disease associations.

PubMed

Preston, Mark D; Dudbridge, Frank

2014-03-01

Rare genetic variants are thought to be important components in the causality of many diseases but discovering these associations is challenging. We demonstrate how best to use family-based designs to improve the power to detect rare variant disease associations. We show that using genetic data from enriched families (those pedigrees with greater than one affected member) increases the power and sensitivity of existing case-control rare variant tests. However, we show that transmission- (or within-family-) based tests do not benefit from this enrichment. This means that, in studies where a limited amount of genotyping is available, choosing a single case from each of many pedigrees has greater power than selecting multiple cases from fewer pedigrees. Finally, we show how a pseudo-case-control design allows a greater range of statistical tests to be applied to family data. © 2014 The Authors. Annals of Human Genetics published by John Wiley & Sons Ltd/University College London.

Antecedent Social Skills Interventions for Individuals with ASD: What Works, for Whom, and under What Conditions?

ERIC Educational Resources Information Center

Ledford, Jennifer R.; King, Seth; Harbin, Emilee R.; Zimmerman, Kathleen N.

2018-01-01

Social skills interventions designed to increase pro-social interactions for individuals with autism spectrum disorders are critical, but the relative effectiveness of these interventions is not well understood. More than 250 single-case design studies in 113 articles were reviewed and described in terms of participants, settings, arrangements,…

Hybrid Architectures and Their Impact on Intelligent Design

NASA Technical Reports Server (NTRS)

Kandel, Abe

1996-01-01

In this presentation we investigate a novel framework for the design of autonomous fuzzy intelligent systems. The system integrates the following modules into a single autonomous entity: (1) a fuzzy expert system; (2) artificial neural network; (3) genetic algorithm; and (4) case-base reasoning. We describe the integration of these units into one intelligent structure and discuss potential applications.

Writing Simple Sentences and Descriptive Paragraphs: Effects of an Intervention on Adolescents with Writing Difficulties

ERIC Educational Resources Information Center

Datchuk, Shawn M.

2016-01-01

The present study investigated the effects of a multicomponent intervention on the writing behavior of adolescents with writing difficulties. A single-case design consisting of a combination of multiple-probe design across participants and pre-post test was used. Four participants completed two intervention phases: (a) sentence instruction and…

Negative Results: Conceptual and Methodological Dimensions in Single-Case Intervention Research

ERIC Educational Resources Information Center

Kratochwill, Thomas R.; Levin, Joel R.; Horner, Robert H.

2018-01-01

The central roles of science in the field of remedial and special education are to (a) identify basic laws of nature and (b) apply those laws in the design of practices that achieve socially valued outcomes. The scientific process is designed to allow demonstration of specific (typically positive) outcomes, and to assist in the attribution of…

Use of Continuous Exponential Families to Link Forms via Anchor Tests. Research Report. ETS RR-11-11

ERIC Educational Resources Information Center

Haberman, Shelby J.; Yan, Duanli

2011-01-01

Continuous exponential families are applied to linking test forms via an internal anchor. This application combines work on continuous exponential families for single-group designs and work on continuous exponential families for equivalent-group designs. Results are compared to those for kernel and equipercentile equating in the case of chained…

What Equivocal Data from Single Case Comparison Studies Reveal about Evidence-Based Practices in Early Childhood Special Education

ERIC Educational Resources Information Center

Ledford, Jennifer R.; Barton, Erin E.; Hardy, Jessica K.; Elam, Katie; Seabolt, Jordan; Shanks, Meredith; Hemmeter, M. L.; Kaiser, Ann

2016-01-01

Although comparison studies are important in early intervention/early childhood special education (EI/ECSE), results of well-designed comparison studies are likely to be unpublished because of undifferentiated or differently differentiated results across participants. The purpose of this article is to highlight the utility of comparison designs in…

An Evaluation of a Family Counseling Intervention ("Tuko Pamoja") in Kenya: a Single Case Series Design

ClinicalTrials.gov

2017-11-27

Mental Health; Family Relations; Family Conflict; Child Mental Disorder; Adolescent - Emotional Problem; Adolescent Problem Behavior; Child Behavior; Child Abuse; Marital Conflict; Domestic Violence; Parent-Child Relations; Parenting

Multistate approaches in computational protein design

PubMed Central

Davey, James A; Chica, Roberto A

2012-01-01

Computational protein design (CPD) is a useful tool for protein engineers. It has been successfully applied towards the creation of proteins with increased thermostability, improved binding affinity, novel enzymatic activity, and altered ligand specificity. Traditionally, CPD calculations search and rank sequences using a single fixed protein backbone template in an approach referred to as single-state design (SSD). While SSD has enjoyed considerable success, certain design objectives require the explicit consideration of multiple conformational and/or chemical states. Cases where a “multistate” approach may be advantageous over the SSD approach include designing conformational changes into proteins, using native ensembles to mimic backbone flexibility, and designing ligand or oligomeric association specificities. These design objectives can be efficiently tackled using multistate design (MSD), an emerging methodology in CPD that considers any number of protein conformational or chemical states as inputs instead of a single protein backbone template, as in SSD. In this review article, recent examples of the successful design of a desired property into proteins using MSD are described. These studies employing MSD are divided into two categories—those that utilized multiple conformational states, and those that utilized multiple chemical states. In addition, the scoring of competing states during negative design is discussed as a current challenge for MSD. PMID:22811394

On the use of Different Methodologies in Cognitive Neuropsychology: Drink Deep and from Several Sources

PubMed Central

Nickels, Lyndsey; Howard, David; Best, Wendy

2012-01-01

Cognitive neuropsychology has championed the use of single-case research design. Recently, however, case series designs that employ multiple single cases have been increasingly utilized to address theoretical issues using data from neuropsychological populations. In this paper, we examine these methodologies, focusing on a number of points in particular. First we discuss the use of dissociations and associations, often thought of as a defining feature of cognitive neuropsychology, and argue that they are better viewed as part of a spectrum of methods that aim to explain and predict behaviour. We also raise issues regarding case series design in particular, arguing that selection of an appropriate sample, including controlling degree of homogeneity, is critical and constrains the theoretical claims that can be made on the basis of the data. We discuss the possible interpretation of “outliers” in a case series, suggesting that while they may reflect “noise” caused by variability in performance due to factors that are not of relevance to the theoretical claims, they may also reflect the presence of patterns that are critical to test, refine, and potentially falsify our theories. The role of case series in treatment research is also raised, in light of the fact that, despite their status as gold standard, randomized controlled trials cannot provide answers to many crucial theoretical and clinical questions. Finally, we stress the importance of converging evidence: We propose that it is conclusions informed by multiple sources of evidence that are likely to best inform theory and stand the test of time. PMID:22746689

Shape Memory Alloy Actuator Design: CASMART Collaborative Best Practices

NASA Technical Reports Server (NTRS)

Benafan, Othmane; Brown, Jeff; Calkins, F. Tad; Kumar, Parikshith; Stebner, Aaron; Turner, Travis; Vaidyanathan, Raj; Webster, John; Young, Marcus L.

2011-01-01

Upon examination of shape memory alloy (SMA) actuation designs, there are many considerations and methodologies that are common to them all. A goal of CASMART's design working group is to compile the collective experiences of CASMART's member organizations into a single medium that engineers can then use to make the best decisions regarding SMA system design. In this paper, a review of recent work toward this goal is presented, spanning a wide range of design aspects including evaluation, properties, testing, modeling, alloy selection, fabrication, actuator processing, design optimization, controls, and system integration. We have documented each aspect, based on our collective experiences, so that the design engineer may access the tools and information needed to successfully design and develop SMA systems. Through comparison of several case studies, it is shown that there is not an obvious single, linear route a designer can adopt to navigate the path of concept to product. SMA engineering aspects will have different priorities and emphasis for different applications.

Method for isolating two aquifers in a single borehole

DOEpatents

Burklund, P.W.

1984-01-20

A method for isolating and individually instrumenting separate aquifers within a single borehole is disclosed. A borehole is first drilled from the ground surface, through an upper aquifer, and into a separating confining bed. A casing, having upper and lower sections separated by a coupling collar, is lowered into the borehole. The borehole is grouted in the vicinity of the lower section of the casing. A borehole is then drilled through the grout plug and into a lower aquifer. After the lower aquifer is instrumented, the borehole is grouted back into the lower portion of the casing. Then the upper section of the casing is unscrewed via the coupling collar and removed from the borehole. Finally, instrumentation is added to the upper aquifer and the borehole is appropriately grouted. The coupling collar is designed to have upper right-hand screw threads and lower left-hand screw thread, whereby the sections of the casing can be readily separated.

Method for isolating two aquifers in a single borehole

DOEpatents

Burklund, Patrick W.

1985-10-22

A method for isolating and individually instrumenting separate aquifers within a single borehole. A borehole is first drilled from the ground surface, through an upper aquifer, and into a separating confining bed. A casing, having upper and lower sections separated by a coupling collar, is lowered into the borehole. The borehole is grouted in the vicinity of the lower section of the casing. A borehole is then drilled through the grout plug and into a lower aquifer. After the lower aquifer is instrumented, the borehole is grouted back into the lower portion of the casing. Then the upper section of the casing is unscrewed via the coupling collar and removed from the borehole. Finally, instrumentation is added to the upper aquifer and the borehole is appropriately grouted. The coupling collar is designed to have upper right-hand screw threads and lower left-hand screw thread, whereby the sections of the casing can be readily separated.

The Effect of Child-Centered Play Therapy on the Externalizing Behaviors of Low Income Male Preschoolers during Group Instructional Time and Center Time: A Single-Case Design Study

ERIC Educational Resources Information Center

Phipps, Christa Brown

2017-01-01

Low income male preschoolers with externalizing behaviors have continued behavior issues throughout elementary school, middle school, high school, and into adulthood and create stress for their teachers. Because of this, it is important to detect externalizing behaviors early and implement an appropriate intervention. A single subject reversal…

Design optimization of single mixed refrigerant LNG process using a hybrid modified coordinate descent algorithm

NASA Astrophysics Data System (ADS)

Qyyum, Muhammad Abdul; Long, Nguyen Van Duc; Minh, Le Quang; Lee, Moonyong

2018-01-01

Design optimization of the single mixed refrigerant (SMR) natural gas liquefaction (LNG) process involves highly non-linear interactions between decision variables, constraints, and the objective function. These non-linear interactions lead to an irreversibility, which deteriorates the energy efficiency of the LNG process. In this study, a simple and highly efficient hybrid modified coordinate descent (HMCD) algorithm was proposed to cope with the optimization of the natural gas liquefaction process. The single mixed refrigerant process was modeled in Aspen Hysys® and then connected to a Microsoft Visual Studio environment. The proposed optimization algorithm provided an improved result compared to the other existing methodologies to find the optimal condition of the complex mixed refrigerant natural gas liquefaction process. By applying the proposed optimization algorithm, the SMR process can be designed with the 0.2555 kW specific compression power which is equivalent to 44.3% energy saving as compared to the base case. Furthermore, in terms of coefficient of performance (COP), it can be enhanced up to 34.7% as compared to the base case. The proposed optimization algorithm provides a deep understanding of the optimization of the liquefaction process in both technical and numerical perspectives. In addition, the HMCD algorithm can be employed to any mixed refrigerant based liquefaction process in the natural gas industry.

A dialectical behavior therapy skills intervention for women with suicidal behaviors in rural Nepal: A single-case experimental design series.

PubMed

Ramaiya, Megan K; McLean, Caitlin; Regmi, Upasana; Fiorillo, Devika; Robins, Clive J; Kohrt, Brandon A

2018-07-01

Suicide in low- and middle-income countries (LMICs) accounts for 75% of the world's burden of suicide mortality and is the leading single cause of death among Nepali reproductive age women. To advance treatment for suicidal behaviors in LMICs, a single-case experimental design (SCED) was conducted of a culturally adapted Dialectical Behavior Therapy skills intervention for Nepali populations (DBT-N). Ten Nepali women with histories of suicidality participated in the 10-session intervention. Outcomes of emotion regulation, suicidal ideation, depression, anxiety, resilience, and coping skills use were measured at multiple time points pre-intervention, during, and at follow-up. Qualitative interviewing assessed DBT-N's feasibility and acceptability. Participants showed improvements in emotion regulation over the course of treatment, which were associated with increased skills use. Rapid, sustained reductions in suicidal ideation and improvements in resilience were observed after DBT-N initiation. This SCED supports conducting further evaluation of DBT-N through controlled trials with emotion regulation as a target mechanism of action for reducing suicidal behaviors in LMICs. © 2018 Wiley Periodicals, Inc.

Cognitive-behavioral treatment of adult rumination behavior in the setting of disordered eating: A single case experimental design.

PubMed

Thomas, Jennifer J; Murray, Helen B

2016-10-01

The integration of feeding and eating disorders into a single DSM-5 chapter introduces an opportunity to explore common mechanisms and transdiagnostic treatment approaches. In contrast to a robust literature on the evidence-based treatment of eating disorders, very few data guide the treatment of rumination disorder (RD). In a single case experimental design, we describe the treatment of a 27-year-old woman who presented to an eating-disorder clinic with a 15-year history of untreated rumination and intermittent binge eating. According to time series analysis, she reduced rumination frequency at trend-level during the initial baseline phase (self-monitoring only), and exhibited significant reductions during the active intervention phase (self-monitoring + cognitive-behavioral techniques including diaphragmatic breathing and behavioral experimentation). She maintained these gains at 23 weeks post-intervention. Although more rigorous systematic investigation is needed, these data suggest that selected cognitive and behavioral techniques already familiar to eating-disorder clinicians may have heuristic value for RD treatment. © 2016 Wiley Periodicals, Inc. (Int J Eat Disord 2016; 49:967-972). © 2016 Wiley Periodicals, Inc.

Nature and Role of Traditional Forms of Counselling in Zambia: A Case of Lusaka Province

ERIC Educational Resources Information Center

Chiboola, Hector; Munsaka, Sody M.

2018-01-01

The aim of this study was to determine the nature and role of traditional forms of counselling and the scope of common problems presented to traditional counsellors in Lusaka province. It used a qualitative research methodology and deployed a holistic single-case study design with multiple embedded units of analysis. The sample consisted of 80…

A Case Study with Green Dot Public Schools on Managing the Tension between Fidelity and Adaptation When Scaling-Up

ERIC Educational Resources Information Center

Cevallos, Pedro F., Jr.

2009-01-01

This dissertation was a single case study with Green Dot Public Schools (GDPS) describing their rapid scale-up process. Specifically, it investigates the phenomenon of the inherent tension between maintaining the fidelity of the original model school's design, culture and values with local adaptation of the brand by stakeholders at the expansion…

Cases on Interdisciplinary Research Trends in Science, Technology, Engineering, and Mathematics: Studies on Urban Classrooms. Advances in Educational Technologies and Instructional Design

ERIC Educational Resources Information Center

Lansiquot, Reneta D.

2013-01-01

Involving two or more academic subjects, interdisciplinary studies aim to blend together broad perspectives, knowledge, skills, and epistemology in an educational setting. By focusing on topics or questions too broad for a single discipline to cover, these studies strive to draw connections between seemingly different fields. Cases on…

A Case Study with Green Dot Public Schools on Managing the Tension between Fidelity and Adaptation when Scaling-Up

ERIC Educational Resources Information Center

Cevallos, Pedro Felipe, Jr.

2009-01-01

This dissertation was a single case study with Green Dot Public Schools (GDPS) describing their rapid scale-up process. Specifically, it investigates the phenomenon of the inherent tension between maintaining the fidelity of the original model school's design, culture and values with local adaptation of the brand by stakeholders at the expansion…

The Role of Between-Case Effect Size in Conducting, Interpreting, and Summarizing Single-Case Research. NCER 2015-002

ERIC Educational Resources Information Center

Shadish, William R.; Hedges, Larry V.; Horner, Robert H.; Odom, Samuel L.

2015-01-01

The field of education is increasingly committed to adopting evidence-based practices. Although randomized experimental designs provide strong evidence of the causal effects of interventions, they are not always feasible. For example, depending upon the research question, it may be difficult for researchers to find the number of children necessary…

Integrating multimodal transport into cellulosic biofuel supply chain design under feedstock seasonality with a case study based on California.

PubMed

Xie, Fei; Huang, Yongxi; Eksioglu, Sandra

2014-01-01

A multistage, mixed integer programing model was developed that fully integrates multimodal transport into the cellulosic biofuel supply chain design under feedstock seasonality. Three transport modes are considered: truck, single railcar, and unit train. The goal is to minimize the total cost for infrastructure, feedstock harvesting, biofuel production, and transportation. Strategic decisions including the locations and capacities of transshipment hubs, biorefineries, and terminals and tactical decisions on system operations are optimized in an integrated manner. When the model was implemented to a case study of cellulosic ethanol production in California, it was found that trucks are convenient for short-haul deliveries while rails are more effective for long-haul transportation. Taking the advantage of these benefits, the multimodal transport provides more cost effective solutions than the single-mode transport (truck). Copyright © 2013 Elsevier Ltd. All rights reserved.

Single-Case Design Research: Building the Evidence-Base in the Field of Education of Deaf and Hard of Hearing Students.

PubMed

Cannon, Joanna E; Guardino, Caroline; Antia, Shirin D; Luckner, John L

2016-01-01

The field of education of deaf and hard of hearing (DHH) students has a paucity of evidence-based practices (EBPs) to guide instruction. The authors discussed how the research methodology of single-case design (SCD) can be used to build EBPs through direct and systematic replication of studies. An overview of SCD research methods is presented, including an explanation of how internal and external validity issues are addressed, and why SCD is appropriate for intervention research with DHH children. The authors then examine the SCD research in the field according to quality indicators (QIs; at the individual level and as a body of evidence) to determine the existing evidence base. Finally, future replication areas are recommended to fill the gaps in SCD research with students who are DHH in order to add to the evidence base in the field.

PathCase-SB architecture and database design

PubMed Central

2011-01-01

Background Integration of metabolic pathways resources and regulatory metabolic network models, and deploying new tools on the integrated platform can help perform more effective and more efficient systems biology research on understanding the regulation in metabolic networks. Therefore, the tasks of (a) integrating under a single database environment regulatory metabolic networks and existing models, and (b) building tools to help with modeling and analysis are desirable and intellectually challenging computational tasks. Description PathCase Systems Biology (PathCase-SB) is built and released. The PathCase-SB database provides data and API for multiple user interfaces and software tools. The current PathCase-SB system provides a database-enabled framework and web-based computational tools towards facilitating the development of kinetic models for biological systems. PathCase-SB aims to integrate data of selected biological data sources on the web (currently, BioModels database and KEGG), and to provide more powerful and/or new capabilities via the new web-based integrative framework. This paper describes architecture and database design issues encountered in PathCase-SB's design and implementation, and presents the current design of PathCase-SB's architecture and database. Conclusions PathCase-SB architecture and database provide a highly extensible and scalable environment with easy and fast (real-time) access to the data in the database. PathCase-SB itself is already being used by researchers across the world. PMID:22070889

A/R/Tography and Teacher Education in the 21st Century

ERIC Educational Resources Information Center

Wiebe, Sean; Smith, Claire Caseley

2016-01-01

In this article, we summarize research on Prince Edward Island where a Prince Edward Island teacher, identifying as an a/r/tographer, designed a digital and multiliteracies unit, as part of a directed studies course in her Master of Education program. Small in scope, this single participant case study was designed to give a fuller picture to three…

School-Based Interventions Targeting Challenging Behaviors Exhibited by Young Children with Autism Spectrum Disorder: A Systematic Literature Review

ERIC Educational Resources Information Center

Martinez, Jose R.; Werch, Brittany L.; Conroy, Maureen A.

2016-01-01

The purpose of this review was to critically examine and summarize the impact of school-based interventions designed to decrease challenging behaviors in young children with Autism Spectrum Disorder (ASD). Reviewed studies employed a single-case experimental design, targeted challenging behaviors, included children 3-8 years old with ASD, and took…

A survey of publication practices of single-case design researchers when treatments have small or large effects.

PubMed

Shadish, William R; Zelinsky, Nicole A M; Vevea, Jack L; Kratochwill, Thomas R

2016-09-01

The published literature often underrepresents studies that do not find evidence for a treatment effect; this is often called publication bias. Literature reviews that fail to include such studies may overestimate the size of an effect. Only a few studies have examined publication bias in single-case design (SCD) research, but those studies suggest that publication bias may occur. This study surveyed SCD researchers about publication preferences in response to simulated SCD results that show a range of small to large effects. Results suggest that SCD researchers are more likely to submit manuscripts that show large effects for publication and are more likely to recommend acceptance of manuscripts that show large effects when they act as a reviewer. A nontrivial minority of SCD researchers (4% to 15%) would drop 1 or 2 cases from the study if the effect size is small and then submit for publication. This article ends with a discussion of implications for publication practices in SCD research. © 2016 Society for the Experimental Analysis of Behavior.

Sensitizing Carbon Nanotube Transistors for Single Molecule Sensor Applications

NASA Astrophysics Data System (ADS)

Collins, Philip G.; Akhterov, Maxim; Sims, Patrick C.; Fuller, Elliot J.; Gul, O. Tolga; Pan, Deng

2015-03-01

Recent work has demonstrated single-charge sensitivity in two types of carbon nanotube transistors. In one case, a two-level system near the nanotube or noncovalently attached to the nanotube perturbs the current electrostatically. In a second case, a sidewall defect or other covalent modification sensitizes one site along the conductor. Comparative research has helped reveal differences in the transduction mechanisms of the two cases and provides design rules for maximizing reliable signals for sensing applications. The covalent modifications are not mere perturbations and they are far more sensitive than noncovalent attachments, for example. However, the new degrees of freedom that accompany covalent disorder often have similar energy scales, leading to multiple independent fluctuations that degrade the overall signal-to-noise. Noncovalent sensitization generally produces a smaller signal amplitude in a background of other low-energy fluctuators, but a well-designed noncovalent linker can result in a highly predictable signal amplitudes. Furthermore, noncovalent fabrication methods are scalable, so that wafer-scale arrays of molecular sensors are most likely to follow this path. This work was supported by NSF (ECCS-1231910).

ATR architecture for multisensor fusion

NASA Astrophysics Data System (ADS)

Hamilton, Mark K.; Kipp, Teresa A.

1996-06-01

The work of the U.S. Army Research Laboratory (ARL) in the area of algorithms for the identification of static military targets in single-frame electro-optical (EO) imagery has demonstrated great potential in platform-based automatic target identification (ATI). In this case, the term identification is used to mean being able to tell the difference between two military vehicles -- e.g., the M60 from the T72. ARL's work includes not only single-sensor forward-looking infrared (FLIR) ATI algorithms, but also multi-sensor ATI algorithms. We briefly discuss ARL's hybrid model-based/data-learning strategy for ATI, which represents a significant step forward in ATI algorithm design. For example, in the case of single sensor FLIR it allows the human algorithm designer to build directly into the algorithm knowledge that can be adequately modeled at this time, such as the target geometry which directly translates into the target silhouette in the FLIR realm. In addition, it allows structure that is not currently well understood (i.e., adequately modeled) to be incorporated through automated data-learning algorithms, which in a FLIR directly translates into an internal thermal target structure signature. This paper shows the direct applicability of this strategy to both the single-sensor FLIR as well as the multi-sensor FLIR and laser radar.

Evaluation of electrical aversion therapy for inappropriate sexual behaviour after traumatic brain injury: a single case experimental design study

PubMed Central

ter Mors, Bert Jan; van Heugten, Caroline M; van Harten, Peter N

2012-01-01

Inappropriate sexual behaviour after acquired brain injury is a severe complication. Evidence for effective treatment is not available. Electrical aversion therapy (EAT) is a behavioural therapeutic option used in persons with intellectual disabilities, which might be suitable for brain-injured individuals for whom other therapies are not effective. The effect of EAT in brain injury has not been investigated previously. A single case experimental design was used. In an ABBA (baseline-treatment-treatment-withdrawal) design the frequency of the target behaviour (ie, inappropriate sexual behaviour) in a 40-year-old man was measured daily. A total of 551 measurements were recorded. A significant reduction of the target behaviour was seen after the first treatment phase (baseline 12.18 (2.59) vs 3.15 (3.19) mean target behaviours daily); this reduction remained stable over time. We conclude that EAT was effective in this patient with inappropriate sexual behaviour due to severe brain injury. EAT can therefore be considered in therapy resistant inappropriate sexual behaviour in brain-injured patients. PMID:22922913

Evaluation of electrical aversion therapy for inappropriate sexual behaviour after traumatic brain injury: a single case experimental design study.

PubMed

Ter Mors, Bert Jan; van Heugten, Caroline M; van Harten, Peter N

2012-08-24

Inappropriate sexual behaviour after acquired brain injury is a severe complication. Evidence for effective treatment is not available. Electrical aversion therapy (EAT) is a behavioural therapeutic option used in persons with intellectual disabilities, which might be suitable for brain-injured individuals for whom other therapies are not effective. The effect of EAT in brain injury has not been investigated previously. A single case experimental design was used. In an ABBA (baseline-treatment-treatment-withdrawal) design the frequency of the target behaviour (ie, inappropriate sexual behaviour) in a 40-year-old man was measured daily. A total of 551 measurements were recorded. A significant reduction of the target behaviour was seen after the first treatment phase (baseline 12.18 (2.59) vs 3.15 (3.19) mean target behaviours daily); this reduction remained stable over time. We conclude that EAT was effective in this patient with inappropriate sexual behaviour due to severe brain injury. EAT can therefore be considered in therapy resistant inappropriate sexual behaviour in brain-injured patients.

Experimental comparison of conventional and nonlinear model-based control of a mixing tank

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haeggblom, K.E.

1993-11-01

In this case study concerning control of a laboratory-scale mixing tank, conventional multiloop single-input single-output (SISO) control is compared with model-based'' control where the nonlinearity and multivariable characteristics of the process are explicitly taken into account. It is shown, especially if the operating range of the process is large, that the two outputs (level and temperature) cannot be adequately controlled by multiloop SISO control even if gain scheduling is used. By nonlinear multiple-input multiple-output (MIMO) control, on the other hand, very good control performance is obtained. The basic approach to nonlinear control used in this study is first to transformmore » the process into a globally linear and decoupled system, and then to design controllers for this system. Because of the properties of the resulting MIMO system, the controller design is very easy. Two nonlinear control system designs based on a steady-state and a dynamic model, respectively, are considered. In the dynamic case, both setpoint tracking and disturbance rejection can be addressed separately.« less

Markov Chain Monte Carlo in the Analysis of Single-Molecule Experimental Data

NASA Astrophysics Data System (ADS)

Kou, S. C.; Xie, X. Sunney; Liu, Jun S.

2003-11-01

This article provides a Bayesian analysis of the single-molecule fluorescence lifetime experiment designed to probe the conformational dynamics of a single DNA hairpin molecule. The DNA hairpin's conformational change is initially modeled as a two-state Markov chain, which is not observable and has to be indirectly inferred. The Brownian diffusion of the single molecule, in addition to the hidden Markov structure, further complicates the matter. We show that the analytical form of the likelihood function can be obtained in the simplest case and a Metropolis-Hastings algorithm can be designed to sample from the posterior distribution of the parameters of interest and to compute desired estiamtes. To cope with the molecular diffusion process and the potentially oscillating energy barrier between the two states of the DNA hairpin, we introduce a data augmentation technique to handle both the Brownian diffusion and the hidden Ornstein-Uhlenbeck process associated with the fluctuating energy barrier, and design a more sophisticated Metropolis-type algorithm. Our method not only increases the estimating resolution by several folds but also proves to be successful for model discrimination.

"Growing Up" through the Middle Level Years: A Case Study in Leadership Actions Necessary to Meet Students' Needs

ERIC Educational Resources Information Center

Smith, M. Melissa Richard

2010-01-01

The purpose of this qualitative study was to examine the journey of a suburban middle level principal, as she led a school through an educational change process. This was a single case study design involving the school leader as principal participant, and the researcher as participant observer. The theoretical model that was developed for this…

Combining nonoverlap and trend for single-case research: Tau-U.

PubMed

Parker, Richard I; Vannest, Kimberly J; Davis, John L; Sauber, Stephanie B

2011-06-01

A new index for analysis of single-case research data was proposed, Tau-U, which combines nonoverlap between phases with trend from within the intervention phase. In addition, it provides the option of controlling undesirable Phase A trend. The derivation of Tau-U from Kendall's Rank Correlation and the Mann-Whitney U test between groups is demonstrated. The equivalence of trend and nonoverlap is also shown, with supportive citations from field leaders. Tau-U calculations are demonstrated for simple AB and ABA designs. Tau-U is then field tested on a sample of 382 published data series. Controlling undesirable Phase A trend caused only a modest change from nonoverlap. The inclusion of Phase B trend yielded more modest results than simple nonoverlap. The Tau-U score distribution did not show the artificial ceiling shown by all other nonoverlap techniques. It performed reasonably well with autocorrelated data. Tau-U shows promise for single-case applications, but further study is desirable. Copyright © 2011. Published by Elsevier Ltd.

Comparing Visual and Statistical Analysis in Single-Case Studies Using Published Studies

PubMed Central

Harrington, Magadalena; Velicer, Wayne F.

2015-01-01

Little is known about the extent to which interrupted time-series analysis (ITSA) can be applied to short, single-case study designs and whether those applications produce results consistent with visual analysis (VA). This paper examines the extent to which ITSA can be applied to single-case study designs and compares the results based on two methods: ITSA and VA, using papers published in the Journal of Applied Behavior Analysis in 2010. The study was made possible by the development of software called UnGraph® which facilitates the recovery of raw data from the graphs. ITSA was successfully applied to 94% of the examined graphs with the number of observations ranging from 8 to 136. Moderate to high lag 1 autocorrelations (> .50) were found for 46% of the data series. Effect sizes similar to group-level Cohen’s d were identified based on the tertile distribution. Effects ranging from 0.00 to 0.99 were classified as small, those ranging from 1.00 to 2.49 as medium, and large effect sizes were defined as 2.50 or greater. Comparison of the conclusions from VA and ITSA had a low level of agreement (Kappa = .14, accounting for the agreement expected by chance). The results demonstrate that ITSA can be broadly implemented in applied behavior analysis research. These two methods should be viewed as complimentary and used concurrently. PMID:26609876

Increasing Active Student Responding in a University Applied Behavior Analysis Course: The Effect of Daily Assessment and Response Cards on End of Week Quiz Scores

ERIC Educational Resources Information Center

Malanga, Paul R.; Sweeney, William J.

2008-01-01

The study compared the effects of daily assessment and response cards on average weekly quiz scores in an introduction to applied behavior analysis course. An alternating treatments design (Kazdin 1982, "Single-case research designs." New York: Oxford University Press; Cooper et al. 2007, "Applied behavior analysis." Upper Saddle River:…

An approach for aerodynamic optimization of transonic fan blades

NASA Astrophysics Data System (ADS)

Khelghatibana, Maryam

Aerodynamic design optimization of transonic fan blades is a highly challenging problem due to the complexity of flow field inside the fan, the conflicting design requirements and the high-dimensional design space. In order to address all these challenges, an aerodynamic design optimization method is developed in this study. This method automates the design process by integrating a geometrical parameterization method, a CFD solver and numerical optimization methods that can be applied to both single and multi-point optimization design problems. A multi-level blade parameterization is employed to modify the blade geometry. Numerical analyses are performed by solving 3D RANS equations combined with SST turbulence model. Genetic algorithms and hybrid optimization methods are applied to solve the optimization problem. In order to verify the effectiveness and feasibility of the optimization method, a singlepoint optimization problem aiming to maximize design efficiency is formulated and applied to redesign a test case. However, transonic fan blade design is inherently a multi-faceted problem that deals with several objectives such as efficiency, stall margin, and choke margin. The proposed multi-point optimization method in the current study is formulated as a bi-objective problem to maximize design and near-stall efficiencies while maintaining the required design pressure ratio. Enhancing these objectives significantly deteriorate the choke margin, specifically at high rotational speeds. Therefore, another constraint is embedded in the optimization problem in order to prevent the reduction of choke margin at high speeds. Since capturing stall inception is numerically very expensive, stall margin has not been considered as an objective in the problem statement. However, improving near-stall efficiency results in a better performance at stall condition, which could enhance the stall margin. An investigation is therefore performed on the Pareto-optimal solutions to demonstrate the relation between near-stall efficiency and stall margin. The proposed method is applied to redesign NASA rotor 67 for single and multiple operating conditions. The single-point design optimization showed +0.28 points improvement of isentropic efficiency at design point, while the design pressure ratio and mass flow are, respectively, within 0.12% and 0.11% of the reference blade. Two cases of multi-point optimization are performed: First, the proposed multi-point optimization problem is relaxed by removing the choke margin constraint in order to demonstrate the relation between near-stall efficiency and stall margin. An investigation on the Pareto-optimal solutions of this optimization shows that the stall margin has been increased with improving near-stall efficiency. The second multi-point optimization case is performed with considering all the objectives and constraints. One selected optimized design on the Pareto front presents +0.41, +0.56 and +0.9 points improvement in near-peak efficiency, near-stall efficiency and stall margin, respectively. The design pressure ratio and mass flow are, respectively, within 0.3% and 0.26% of the reference blade. Moreover the optimized design maintains the required choking margin. Detailed aerodynamic analyses are performed to investigate the effect of shape optimization on shock occurrence, secondary flows, tip leakage and shock/tip-leakage interactions in both single and multi-point optimizations.

Antecedents and Consequences of Supplier Performance Evaluation Efficacy

DTIC Science & Technology

2016-06-30

forming groups of high and low values. These tests are contingent on the reliable and valid measure of high and low rating inflation and high and...year)? Future research could deploy a SPM system as a test case on a limited set of transactions. Using a quasi-experimental design , comparisons...single source, common method bias must be of concern. Harmon’s one -factor test showed that when latent-indicator items were forced onto a single

Good-to-Great Superintendents: An Examination of Jim Collins' Good-to-Great Level Five Leadership Attributes as Demonstrated by the Leadership Behaviors of Superintendents of High-Performing California Public Single-School Districts

ERIC Educational Resources Information Center

Brown, James D.

2010-01-01

Purpose: The purpose of this study was to examine Collins' good-to-great Level Five leadership attributes, as demonstrated by the leadership behaviors of superintendents of high-performing California public single-school districts. Methodology: The researcher used a case study design to conduct this study. Personal interviews were conducted in…

Single and Double ITCZ in Aqua-Planet Models with Globally Uniform Sea Surface Temperature and Solar Insolation: An Interpretation

NASA Technical Reports Server (NTRS)

Chao, Winston C.; Chen, Baode; Einaudi, Franco (Technical Monitor)

2001-01-01

It has been known for more than a decade that an aqua-planet model with globally uniform sea surface temperature and solar insolation angle can generate ITCZ (intertropical convergence zone). Previous studies have shown that the ITCZ under such model settings can be changed between a single ITCZ over the equator and a double ITCZ straddling the equator through one of several measures. These measures include switching to a different cumulus parameterization scheme, changes within the cumulus parameterization scheme, and changes in other aspects of the model design such as horizontal resolution. In this paper an interpretation for these findings is offered. The latitudinal location of the ITCZ is the latitude where the balance of two types of attraction on the ITCZ, both due to earth's rotation, exists. The first type is equator-ward and is directly related to the earth's rotation and thus not sensitive to model design changes. The second type is poleward and is related to the convective circulation and thus is sensitive to model design changes. Due to the shape of the attractors, the balance of the two types of attractions is reached either at the equator or more than 10 degrees away from the equator. The former case results in a single ITCZ over the equator and the latter case a double ITCZ straddling the equator.

Design of polynomial fuzzy observer-controller for nonlinear systems with state delay: sum of squares approach

NASA Astrophysics Data System (ADS)

Gassara, H.; El Hajjaji, A.; Chaabane, M.

2017-07-01

This paper investigates the problem of observer-based control for two classes of polynomial fuzzy systems with time-varying delay. The first class concerns a special case where the polynomial matrices do not depend on the estimated state variables. The second one is the general case where the polynomial matrices could depend on unmeasurable system states that will be estimated. For the last case, two design procedures are proposed. The first one gives the polynomial fuzzy controller and observer gains in two steps. In the second procedure, the designed gains are obtained using a single-step approach to overcome the drawback of a two-step procedure. The obtained conditions are presented in terms of sum of squares (SOS) which can be solved via the SOSTOOLS and a semi-definite program solver. Illustrative examples show the validity and applicability of the proposed results.

Construction of social value or utility-based health indices: the usefulness of factorial experimental design plans.

PubMed

Cadman, D; Goldsmith, C

1986-01-01

Global indices, which aggregate multiple health or function attributes into a single summary indicator, are useful measures in health research. Two key issues must be addressed in the initial stages of index construction from the universe of possible health and function attributes, which ones should be included in a new index? and how simple can the statistical model be to combine attributes into a single numeric index value? Factorial experimental designs were used in the initial stages of developing a function index for evaluating a program for the care of young handicapped children. Beginning with eight attributes judged important to the goals of the program by clinicians, social preference values for different function states were obtained from 32 parents of handicapped children and 32 members of the community. Using category rating methods each rater scored 16 written multi-attribute case descriptions which contained information about a child's status for all eight attributes. Either a good or poor level of each function attribute and age 3 or 5 years were described in each case. Thus, 2(8) = 256 different cases were rated. Two factorial design plans were selected and used to allocate case descriptions to raters. Analysis of variance determined that seven of the eight clinician selected attributes were required in a social value based index for handicapped children. Most importantly, the subsequent steps of index construction could be greatly simplified by the finding that a simple additive statistical model without complex attribute interaction terms was adequate for the index. We conclude that factorial experimental designs are an efficient, feasible and powerful tool for the initial stages of constructing a multi-attribute health index.

Flexible engineering designs for urban water management in Lusaka, Zambia.

PubMed

Tembo, Lucy; Pathirana, Assela; van der Steen, Peter; Zevenbergen, Chris

2015-01-01

Urban water systems are often designed using deterministic single values as design parameters. Subsequently the different design alternatives are compared using a discounted cash flow analysis that assumes that all parameters remain as-predicted for the entire project period. In reality the future is unknown and at best a possible range of values for design parameters can be estimated. A Monte Carlo simulation could then be used to calculate the expected Net Present Value of project alternatives, as well as so-called target curves (cumulative frequency distribution of possible Net Present Values). The same analysis could be done after flexibilities were incorporated in the design, either by using decision rules to decide about the moment of capacity increase, or by buying Real Options (in this case land) to cater for potential capacity increases in the future. This procedure was applied to a sanitation and wastewater treatment case in Lusaka, Zambia. It included various combinations of on-site anaerobic baffled reactors and off-site waste stabilisation ponds. For the case study, it was found that the expected net value of wastewater treatment systems can be increased by 35-60% by designing a small flexible system with Real Options, rather than a large inflexible system.

How Can I Describe Social Studies Curriculum in the First Three Years of Primary School? A Case Study

ERIC Educational Resources Information Center

Aktan, Sümer

2016-01-01

The aim of this study is to determine the opinions of a multigrade class teacher on the nature of social studies lesson, the structure of the social studies curriculum, and the teaching process of social studies lesson. The study was structured in line with a holistic single case design which is contained in the tradition of qualitative research.…

Promoting Career Development in the Early Years of a Person's Life through Self- and Career Construction Counselling (Using an Integrated, Qualitative + Quantitative Approach): A Case Study

ERIC Educational Resources Information Center

Maree, Jacobus G.

2018-01-01

This article reports on the value of career construction counselling (integrating qualitative and quantitative strategies and associated techniques) for a young person. The participant was purposefully selected from a number of people who had sought career counselling in a private practice context. An intrinsic, single-case study design was…

The Effects of Writing Choice Prompt on the Written Narratives of Students with Emotional and Behavioral Disorders: A Case Study of an Abandoned Single-Case Design

ERIC Educational Resources Information Center

Ennis, Robin Parks; Jolivette, Kristine; Losinski, Mickey

2017-01-01

In this study, we investigated the effects of choice of writing prompt on the number of story elements included in written narratives. The investigation took place in a residential facility for students with emotional and behavioral disorders. Participants included six female students in a mixed-grade-level course (students had just completed…

Treatment of obsessive morbid jealousy with cognitive analytic therapy: An adjudicated hermeneutic single-case efficacy design evaluation.

PubMed

Curling, Louise; Kellett, Stephen; Totterdell, Peter; Parry, Glenys; Hardy, Gillian; Berry, Katherine

2018-03-01

The evidence base for the treatment of morbid jealousy with integrative therapies is thin. This study explored the efficacy of cognitive analytic therapy (CAT). An adjudicated hermeneutic single-case efficacy design evaluated the cognitive analytic treatment of a patient meeting diagnostic criteria for obsessive morbid jealousy. A rich case record was developed using a matrix of nomothetic and ideographic quantitative and qualitative outcomes. This record was then debated by sceptic and affirmative research teams. Experienced psychotherapy researchers acted as judges, assessed the original case record, and heard the affirmative-versus-sceptic debate. Judges pronounced an opinion regarding the efficacy of the therapy. The efficacy of CAT was supported by all three judges. Each ruled that change had occurred due to the action of the therapy, beyond any level of reasonable doubt. This research demonstrates the potential usefulness of CAT in treating morbid jealousy and suggests that CAT is conceptually well suited. Suggestions for future clinical and research directions are provided. The relational approach of CAT makes it a suitable therapy for morbid jealousy. The narrative reformulation component of CAT appears to facilitate early change in chronic jealousy patterns. It is helpful for therapists during sessions to use CAT theory to diagrammatically spell out the patterns maintaining jealousy. © 2017 The British Psychological Society.

Shuttle Case Study Collection Website Development

NASA Technical Reports Server (NTRS)

Ransom, Khadijah S.; Johnson, Grace K.

2012-01-01

As a continuation from summer 2012, the Shuttle Case Study Collection has been developed using lessons learned documented by NASA engineers, analysts, and contractors. Decades of information related to processing and launching the Space Shuttle is gathered into a single database to provide educators with an alternative means to teach real-world engineering processes. The goal is to provide additional engineering materials that enhance critical thinking, decision making, and problem solving skills. During this second phase of the project, the Shuttle Case Study Collection website was developed. Extensive HTML coding to link downloadable documents, videos, and images was required, as was training to learn NASA's Content Management System (CMS) for website design. As the final stage of the collection development, the website is designed to allow for distribution of information to the public as well as for case study report submissions from other educators online.

Performance of PIN-PMN-PT Single Crystal Piezoelectric versus PZT8 Piezoceramic Materials in Ultrasonic Transducers

NASA Astrophysics Data System (ADS)

DeAngelis, D. A.; Schulze, G. W.

The recent advancements in the manufacturing of single crystal PIN-PMN-PT piezoelectric materials now make them a cost-competitive alternative to PZT4 and PZT8 (Navy Types I and III) piezoceramic materials, which have been the workhorse of power ultrasonic applications (e.g., welding, cutting, sonar, etc.) for over 50 years. Although there are great benefits to the use of single crystal materials with respect to high output, as well as added actuating and sensing abilities, many transducer designers are still reluctant to explore these materials due to inadequate design guidelines for substituting the familiar PZT materials; for example, what are the implications of the higher capacitance, sensitivity to chipping/cracks, aging effects, frequency shifts, or how much preload can be used are all common questions. This research is a case study on the performance of identical ultrasonic transducer bodies, used for semiconductor wire bonding, assembled with either PZT8 or PIN-PMN-PT piezo material. The main purpose of the study is to establish rule-of-thumb design guidelines for direct substitution of single crystal materials in existing PZT8 transducer designs, along with a side-by-side performance comparison to highlight benefits. Several metrics are investigated such as impedance, frequency, displacement gain, quality factor and electromechanical coupling factor.

Design of a Modular E-Core Flux Concentrating Axial Flux Machine: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husain, Tausif; Sozer, Yilmaz; Husain, Iqbal

2015-08-24

In this paper a novel E-Core axial flux machine is proposed. The machine has a double-stator, single-rotor configuration with flux-concentrating ferrite magnets and pole windings across each leg of an E-Core stator. E-Core stators with the proposed flux-concentrating rotor arrangement result in better magnet utilization and higher torque density. The machine also has a modular structure facilitating simpler construction. This paper presents a single-phase and a three-phase version of the E-Core machine. Case studies for a 1.1-kW, 400-rpm machine for both the single-phase and three-phase axial flux machines are presented. The results are verified through 3D finite element analysis. facilitatingmore » simpler construction. This paper presents a single-phase and a three-phase version of the E-Core machine. Case studies for a 1.1-kW, 400-rpm machine for both the single-phase and three-phase axial flux machines are presented. The results are verified through 3D finite element analysis.« less

Lumbar Pseudomeningocele Causing Hydronephrosis

PubMed Central

Hamilton, Rita G; Brown, Steven W; Goetz, Lance L; Miner, Michael

2009-01-01

Background/Objective: Pseudomeningocele is most commonly the result of a rent in the meninges during spine surgery. Noniatrogenic causes exist but are rare. Pseudomeningoceles may heal spontaneously, but they may also slowly enlarge. They rarely present as a mass within the abdomen. The objective of this study was to present the first case report of hydronephrosis secondary to lumbar pseudomeningocele. Design: Single case report and literature review. Methods: Single case report. Results: This man had undergone extensive lumbar spine surgery for pain and spondylolisthesis. He subsequently developed a pseudomeningocele that caused hydronephrosis of the left kidney. He was treated with surgical intervention and had resolution of his hydronephrosis and his flank and groin pain. He also had improvement of his back pain. Conclusions: This report shows an unusual cause of hydronephrosis—a pseudomeningocele presenting as an abdominal mass that compressed the ureter. PMID:19264055

The Idea and Reality of an Innovative School: From Inventive Design to Established Practice in a New School Building

ERIC Educational Resources Information Center

Sigurðardóttir, Anna Kristín; Hjartarson, Torfi

2016-01-01

The physical environment in schools has in the literature of late been gaining recognition as a potential factor supporting educational change. This article draws a single case out of a research sample of 20 schools in Iceland to relate an inventive design process as the school was being developed and study the current state of established school…

EAT-UP™ Family-Centered Feeding Intervention to Promote Food Acceptance and Decrease Challenging Behaviors: A Single-Case Experimental Design Replicated across Three Families of Children with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Cosbey, Joanna; Muldoon, Deirdre

2017-01-01

This study evaluated the effectiveness of a family-centered feeding intervention, Easing Anxiety Together with Understanding and Perseverance (EAT-UP™), for promoting food acceptance of children with autism spectrum disorder at home. A concurrent multiple-baseline design was used with systematic replication across three families. Baseline was…

Variable structure control of spacecraft reorientation maneuvers

NASA Technical Reports Server (NTRS)

Sira-Ramirez, H.; Dwyer, T. A. W., III

1986-01-01

A Variable Structure Control (VSC) approach is presented for multi-axial spacecraft reorientation maneuvers. A nonlinear sliding surface is proposed which results in an asymptotically stable, ideal linear sliding motion of Cayley-Rodriques attitude parameters. By imposing a desired equivalent dynamics on the attitude parameters, the approach is devoid of optimal control considerations. The single axis case provides a design scheme for the multiple axes design problem. Illustrative examples are presented.

Investigation of TESCOM Driveshaft Assembly Failure

DTIC Science & Technology

1998-10-01

ratio, two-stage axial -flow compressor with a corrected tip speed of 1250 ft/sec at design . The flowpath casing diameter downstream of the inlet... Design of a 1250 ft/sec. Low-Aspect-Ratio, Single-Stage Axial -Flow Compressor , AFAPL-TR-79-2096, Air Force Aero Propulsion Laboratory, Wright...The TESCOM compressor described in this report is a 2.5-stage, low aspect ratio, axial -flow compressor . The performance objectives of this compressor

An investigation of modelling and design for software service applications.

PubMed

Anjum, Maria; Budgen, David

2017-01-01

Software services offer the opportunity to use a component-based approach for the design of applications. However, this needs a deeper understanding of how to develop service-based applications in a systematic manner, and of the set of properties that need to be included in the 'design model'. We have used a realistic application to explore systematically how service-based designs can be created and described. We first identified the key properties of an SOA (service oriented architecture) and then undertook a single-case case study to explore its use in the development of a design for a large-scale application in energy engineering, modelling this with existing notations wherever possible. We evaluated the resulting design model using two walkthroughs with both domain and application experts. We were able to successfully develop a design model around the ten properties identified, and to describe it by adapting existing design notations. A component-based approach to designing such systems does appear to be feasible. However, it needs the assistance of a more integrated set of notations for describing the resulting design model.

An investigation of modelling and design for software service applications

PubMed Central

2017-01-01

Software services offer the opportunity to use a component-based approach for the design of applications. However, this needs a deeper understanding of how to develop service-based applications in a systematic manner, and of the set of properties that need to be included in the ‘design model’. We have used a realistic application to explore systematically how service-based designs can be created and described. We first identified the key properties of an SOA (service oriented architecture) and then undertook a single-case case study to explore its use in the development of a design for a large-scale application in energy engineering, modelling this with existing notations wherever possible. We evaluated the resulting design model using two walkthroughs with both domain and application experts. We were able to successfully develop a design model around the ten properties identified, and to describe it by adapting existing design notations. A component-based approach to designing such systems does appear to be feasible. However, it needs the assistance of a more integrated set of notations for describing the resulting design model. PMID:28489905

Multistabilities and symmetry-broken one-color and two-color states in closely coupled single-mode lasers.

PubMed

Clerkin, Eoin; O'Brien, Stephen; Amann, Andreas

2014-03-01

We theoretically investigate the dynamics of two mutually coupled, identical single-mode semi-conductor lasers. For small separation and large coupling between the lasers, symmetry-broken one-color states are shown to be stable. In this case the light outputs of the lasers have significantly different intensities while at the same time the lasers are locked to a single common frequency. For intermediate coupling we observe stable symmetry-broken two-color states, where both lasers lase simultaneously at two optical frequencies which are separated by up to 150 GHz. Using a five-dimensional model, we identify the bifurcation structure which is responsible for the appearance of symmetric and symmetry-broken one-color and two-color states. Several of these states give rise to multistabilities and therefore allow for the design of all-optical memory elements on the basis of two coupled single-mode lasers. The switching performance of selected designs of optical memory elements is studied numerically.

Multistabilities and symmetry-broken one-color and two-color states in closely coupled single-mode lasers

NASA Astrophysics Data System (ADS)

Clerkin, Eoin; O'Brien, Stephen; Amann, Andreas

2014-03-01

We theoretically investigate the dynamics of two mutually coupled, identical single-mode semi-conductor lasers. For small separation and large coupling between the lasers, symmetry-broken one-color states are shown to be stable. In this case the light outputs of the lasers have significantly different intensities while at the same time the lasers are locked to a single common frequency. For intermediate coupling we observe stable symmetry-broken two-color states, where both lasers lase simultaneously at two optical frequencies which are separated by up to 150 GHz. Using a five-dimensional model, we identify the bifurcation structure which is responsible for the appearance of symmetric and symmetry-broken one-color and two-color states. Several of these states give rise to multistabilities and therefore allow for the design of all-optical memory elements on the basis of two coupled single-mode lasers. The switching performance of selected designs of optical memory elements is studied numerically.

Baseline Design Compliance Matrix for the Rotary Mode Core Sampling System

DOE Office of Scientific and Technical Information (OSTI.GOV)

LECHELT, J.A.

2000-10-17

The purpose of the design compliance matrix (DCM) is to provide a single-source document of all design requirements associated with the fifteen subsystems that make up the rotary mode core sampling (RMCS) system. It is intended to be the baseline requirement document for the RMCS system and to be used in governing all future design and design verification activities associated with it. This document is the DCM for the RMCS system used on Hanford single-shell radioactive waste storage tanks. This includes the Exhauster System, Rotary Mode Core Sample Trucks, Universal Sampling System, Diesel Generator System, Distribution Trailer, X-Ray Cart System,more » Breathing Air Compressor, Nitrogen Supply Trailer, Casks and Cask Truck, Service Trailer, Core Sampling Riser Equipment, Core Sampling Support Trucks, Foot Clamp, Ramps and Platforms and Purged Camera System. Excluded items are tools such as light plants and light stands. Other items such as the breather inlet filter are covered by a different design baseline. In this case, the inlet breather filter is covered by the Tank Farms Design Compliance Matrix.« less

[The application of Y-shaped self-expandable covered metal stents in the thoracostomach-airway fistula: a single center, 11 years experience].

PubMed

Fang, Yi; Li, Tengfei; Han, Xinwei; Wu, Gang; Ren, Jianzhuang; Ren, Kewei; Lu, Huibin; Zhang, Quanhui; Li, Zongming

2015-08-01

To investigate the clinical feasibility and efficacy of Y-shaped self-expandable covered metal stents (Y-stents) in the management of thoracostomach-airway fistula. Retrospective analysis was performed for 108 patients treated for thoracostomach-airway fistula with Y-shaped self-expandable coated metal stents between April 2003 and October 2014. Y-stents were designed based on the dimensions of trachea and bronchus and sites of the fistula and then were inserted under DSA monitoring. There were 65 cases with single big Y-stent placement, 26 cases with single small Y-stent placement, 23 cases with double Y-stents placement, and 1 case with 3 Y-stents placement. Stent implantation was successfully accomplished with single manipulation in all patients. Complete occlusion of the fistula was obtained in 104 patients after the primary manipulation, and 4 patients required a secondary manipulation where a double Y-stents was inserted because of failure of primary manipulate. Ninety-two patients completed the follow-up , while 16 were lost. Fifty-nine patients died while 33 were alive with marked improvement in their quality of life. The placement of Y-stents can effectively occlude the thoracostomach-airway fistula in patients who had had the esophageal tumors resected. The technique is not only feasible but reliable to improve the quality of life of the patients.

Single case design studies in music therapy: resurrecting experimental evidence in small group and individual music therapy clinical settings.

PubMed

Geist, Kamile; Hitchcock, John H

2014-01-01

The profession would benefit from greater and routine generation of causal evidence pertaining to the impact of music therapy interventions on client outcomes. One way to meet this goal is to revisit the use of Single Case Designs (SCDs) in clinical practice and research endeavors in music therapy. Given the appropriate setting and goals, this design can be accomplished with small sample sizes and it is often appropriate for studying music therapy interventions. In this article, we promote and discuss implementation of SCD studies in music therapy settings, review the meaning of internal study validity and by extension the notion of causality, and describe two of the most commonly used SCDs to demonstrate how they can help generate causal evidence to inform the field. In closing, we describe the need for replication and future meta-analysis of SCD studies completed in music therapy settings. SCD studies are both feasible and appropriate for use in music therapy clinical practice settings, particularly for testing effectiveness of interventions for individuals or small groups. © the American Music Therapy Association 2014. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Tuning algorithms for fractional order internal model controllers for time delay processes

NASA Astrophysics Data System (ADS)

Muresan, Cristina I.; Dutta, Abhishek; Dulf, Eva H.; Pinar, Zehra; Maxim, Anca; Ionescu, Clara M.

2016-03-01

This paper presents two tuning algorithms for fractional-order internal model control (IMC) controllers for time delay processes. The two tuning algorithms are based on two specific closed-loop control configurations: the IMC control structure and the Smith predictor structure. In the latter, the equivalency between IMC and Smith predictor control structures is used to tune a fractional-order IMC controller as the primary controller of the Smith predictor structure. Fractional-order IMC controllers are designed in both cases in order to enhance the closed-loop performance and robustness of classical integer order IMC controllers. The tuning procedures are exemplified for both single-input-single-output as well as multivariable processes, described by first-order and second-order transfer functions with time delays. Different numerical examples are provided, including a general multivariable time delay process. Integer order IMC controllers are designed in each case, as well as fractional-order IMC controllers. The simulation results show that the proposed fractional-order IMC controller ensures an increased robustness to modelling uncertainties. Experimental results are also provided, for the design of a multivariable fractional-order IMC controller in a Smith predictor structure for a quadruple-tank system.

Teacher Perceptions about New Evaluation Model Implementations

ERIC Educational Resources Information Center

Bush, Charles D.

2017-01-01

The challenge of designing and implementing teacher evaluation reform throughout the U.S. has been represented by different policies, teacher evaluation components, and difficulties with implementation. The purpose of this qualitative embedded single case study was to explore teacher perceptions about new evaluation model implementations and how…

The Serpent Strikes: Simulation in a Large First-Year Course.

ERIC Educational Resources Information Center

Schrag, Philip G.

1989-01-01

A year-long simulation of a single case supplements a traditional civil procedure course at Georgetown University. Experience with the approach suggests that design features can reduce the burdens on the instructor without reducing course effectiveness, making the approach feasible even with larger classes. (MSE)

Multi-Core Processor Memory Contention Benchmark Analysis Case Study

NASA Technical Reports Server (NTRS)

Simon, Tyler; McGalliard, James

2009-01-01

Multi-core processors dominate current mainframe, server, and high performance computing (HPC) systems. This paper provides synthetic kernel and natural benchmark results from an HPC system at the NASA Goddard Space Flight Center that illustrate the performance impacts of multi-core (dual- and quad-core) vs. single core processor systems. Analysis of processor design, application source code, and synthetic and natural test results all indicate that multi-core processors can suffer from significant memory subsystem contention compared to similar single-core processors.

Design and 4D Printing of Cross-Folded Origami Structures: A Preliminary Investigation.

PubMed

Teoh, Joanne Ee Mei; An, Jia; Feng, Xiaofan; Zhao, Yue; Chua, Chee Kai; Liu, Yong

2018-03-03

In 4D printing research, different types of complex structure folding and unfolding have been investigated. However, research on cross-folding of origami structures (defined as a folding structure with at least two overlapping folds) has not been reported. This research focuses on the investigation of cross-folding structures using multi-material components along different axes and different horizontal hinge thickness with single homogeneous material. Tensile tests were conducted to determine the impact of multi-material components and horizontal hinge thickness. In the case of multi-material structures, the hybrid material composition has a significant impact on the overall maximum strain and Young's modulus properties. In the case of single material structures, the shape recovery speed is inversely proportional to the horizontal hinge thickness, while the flexural or bending strength is proportional to the horizontal hinge thickness. A hinge with a thickness of 0.5 mm could be folded three times prior to fracture whilst a hinge with a thickness of 0.3 mm could be folded only once prior to fracture. A hinge with a thickness of 0.1 mm could not even be folded without cracking. The introduction of a physical hole in the center of the folding/unfolding line provided stress relief and prevented fracture. A complex flower petal shape was used to successfully demonstrate the implementation of overlapping and non-overlapping folding lines using both single material segments and multi-material segments. Design guidelines for establishing cross-folding structures using multi-material components along different axes and different horizontal hinge thicknesses with single or homogeneous material were established. These guidelines can be used to design and implement complex origami structures with overlapping and non-overlapping folding lines. Combined overlapping folding structures could be implemented and allocating specific hole locations in the overall designs could be further explored. In addition, creating a more precise prediction by investigating sets of in between hinge thicknesses and comparing the folding times before fracture, will be the subject of future work.

A Single-Lap Joint Adhesive Bonding Optimization Method Using Gradient and Genetic Algorithms

NASA Technical Reports Server (NTRS)

Smeltzer, Stanley S., III; Finckenor, Jeffrey L.

1999-01-01

A natural process for any engineer, scientist, educator, etc. is to seek the most efficient method for accomplishing a given task. In the case of structural design, an area that has a significant impact on the structural efficiency is joint design. Unless the structure is machined from a solid block of material, the individual components which compose the overall structure must be joined together. The method for joining a structure varies depending on the applied loads, material, assembly and disassembly requirements, service life, environment, etc. Using both metallic and fiber reinforced plastic materials limits the user to two methods or a combination of these methods for joining the components into one structure. The first is mechanical fastening and the second is adhesive bonding. Mechanical fastening is by far the most popular joining technique; however, in terms of structural efficiency, adhesive bonding provides a superior joint since the load is distributed uniformly across the joint. The purpose of this paper is to develop a method for optimizing single-lap joint adhesive bonded structures using both gradient and genetic algorithms and comparing the solution process for each method. The goal of the single-lap joint optimization is to find the most efficient structure that meets the imposed requirements while still remaining as lightweight, economical, and reliable as possible. For the single-lap joint, an optimum joint is determined by minimizing the weight of the overall joint based on constraints from adhesive strengths as well as empirically derived rules. The analytical solution of the sin-le-lap joint is determined using the classical Goland-Reissner technique for case 2 type adhesive joints. Joint weight minimization is achieved using a commercially available routine, Design Optimization Tool (DOT), for the gradient solution while an author developed method is used for the genetic algorithm solution. Results illustrate the critical design variables as a function of adhesive properties and convergences of different joints based on the two optimization methods.

Biomechanical Comparison of Single- Versus Double-Row Capsulolabral Repair for Shoulder Instability: A Review

PubMed Central

Yousif, Matthew John; Bicos, James

2017-01-01

Background: The glenohumeral joint is the most commonly dislocated joint in the body. Failure rates of capsulolabral repair have been reported to be approximately 8%. Recent focus has been on restoration of the capsulolabral complex by a double-row capsulolabral repair technique in an effort to decrease redislocation rates after arthroscopic capsulolabral repair. Purpose: To present a review of the biomechanical literature comparing single- versus double-row capsulolabral repairs and discuss the previous case series of double-row fixation. Study Design: Narrative review. Methods: A simple review of the literature was performed by PubMed search. Only biomechanical studies comparing single- versus double-row capsulolabral repair were included for review. Only those case series and descriptive techniques with clinical results for double-row repair were included in the discussion. Results: Biomechanical comparisons evaluating the native footprint of the labrum demonstrated significantly superior restoration of the footprint through double-row capsulolabral repair compared with single-row repair. Biomechanical comparisons of contact pressure at the repair interface, fracture displacement in bony Bankart lesion, load to failure, and decreased external rotation (suggestive of increased load to failure) were also significantly in favor of double- versus single-row repair. Recent descriptive techniques and case series of double-row fixation have demonstrated good clinical outcomes; however, no comparative clinical studies between single- and double-row repair have assessed functional outcomes. Conclusion: The superiority of double-row capsulolabral repair versus single-row repair remains uncertain because comparative studies assessing clinical outcomes have yet to be performed. PMID:29230427

Applications of mixed-methods methodology in clinical pharmacy research.

PubMed

Hadi, Muhammad Abdul; Closs, S José

2016-06-01

Introduction Mixed-methods methodology, as the name suggests refers to mixing of elements of both qualitative and quantitative methodologies in a single study. In the past decade, mixed-methods methodology has gained popularity among healthcare researchers as it promises to bring together the strengths of both qualitative and quantitative approaches. Methodology A number of mixed-methods designs are available in the literature and the four most commonly used designs in healthcare research are: the convergent parallel design, the embedded design, the exploratory design, and the explanatory design. Each has its own unique advantages, challenges and procedures and selection of a particular design should be guided by the research question. Guidance on designing, conducting and reporting mixed-methods research is available in the literature, so it is advisable to adhere to this to ensure methodological rigour. When to use it is best suited when the research questions require: triangulating findings from different methodologies to explain a single phenomenon; clarifying the results of one method using another method; informing the design of one method based on the findings of another method, development of a scale/questionnaire and answering different research questions within a single study. Two case studies have been presented to illustrate possible applications of mixed-methods methodology. Limitations Possessing the necessary knowledge and skills to undertake qualitative and quantitative data collection, analysis, interpretation and integration remains the biggest challenge for researchers conducting mixed-methods studies. Sequential study designs are often time consuming, being in two (or more) phases whereas concurrent study designs may require more than one data collector to collect both qualitative and quantitative data at the same time.

Very late stent thrombosis after sole stent-assisted coiling at the paraclinoid giant aneurysm : could prophylactic antiplatelet therapy be ceased at the only 1 year after procedure?

PubMed

Shin, Jung-Hoon; Park, Seong-Ho; Kim, Chang-Hyun; Lee, Chang-Young

2014-10-01

Stent thrombosis is a major limitation of stent-assisted coiling, which is an effective method for treating wide-necked aneurysms. Although early in-stent thrombosis has been reported, very late stent thrombosis (VLST) (>1 year) has not been reported following implantation of a single self-expandable stent designed for coiling. Herein, the authors present a case of VLST that occurred 14 months after single stent implantation in a large paraclinoid aneurysm with an ultra-wide neck involving the parent artery circumferentially. This case indicates the need for establishing guidelines regarding the optimal duration of prophylactic antiplatelet therapy following stent-assisted coiling, which remains undefined in the neuroendovascular field.

Lymphocyte signaling : beyond knockouts

PubMed Central

Saveliev, Alexander; Tybulewicz, Victor L. J.

2016-01-01

The analysis of lymphocyte signaling was greatly enhanced by the advent of gene targeting, which allows the selective inactivation of a single gene. Whereas this gene ‘knockout’ approach is often informative, in many cases the phenotype resulting from gene ablation might not provide a complete picture of the function of the corresponding protein. If a protein has multiple functions within a single or several signaling pathways, or stabilizes other proteins in a complex, the phenotypic consequences of a gene knockout may manifest as a combination of several different perturbations. In these cases, gene targeting to ‘knockin’ subtle point mutations might provide more accurate insight into protein function. However, to be informative, such mutations must be carefully designed based on structural and biophysical data. PMID:19295633

Design of single-layer high-efficiency transmitting phase-gradient metasurface and high gain antenna

NASA Astrophysics Data System (ADS)

Zhang, Di; Yang, Xiaoqing; Su, Piqiang; Luo, Jiefang; Chen, Huijie; Yuan, Jianping; Li, Lixin

2017-12-01

In this paper, based on rotation phase-gradient principle, a single-layer, high-efficiency transmitting metasurface is designed and applied to high-gain antenna. In the case of circularly polarized incident wave, the PCR (polarization conversions ratio) of the metasurface element is greater than 90% in the band of 9.11-10.48 GHz. The transmitting wave emerges an anomalous refraction when left-handed circularly polarized wave are incident perpendicularly to the 1D phase-gradient metasurface, which is composed of cycle arrangement of 6 units with step value of 30°. The simulated anomalous refraction angle is 40.1°, coincided with the theoretical design value (40.6°). For further application, the 2D focused metasurface is designed to enhance the antenna performance while the left-handed circularly polarized antenna is placed at the focus. The simulated max gain is increased by 12 dB (182%) and the half-power beamwidth is reduced by 74.6°. The measured results are coincided with the simulations, which indicates the antenna has high directivity. The designed single-layer transmission metasurface has advantages of thin thickness (only 1.5 mm), high efficiency and light weight, and will have important application prospects in polarization conversion and beam control.

Improving Mathematics Performance among Secondary Students with EBD: A Methodological Review

ERIC Educational Resources Information Center

Mulcahy, Candace A.; Krezmien, Michael P.; Travers, Jason

2016-01-01

In this methodological review, the authors apply special education research quality indicators and standards for single case design to analyze mathematics intervention studies for secondary students with emotional and behavioral disorders (EBD). A systematic methodological review of literature from 1975 to December 2012 yielded 19 articles that…

A Meta-Analysis of the Taped Problems Intervention

ERIC Educational Resources Information Center

Kleinert, Whitney L.; Codding, Robin S.; Minami, Takuya; Gould, Kaitlin

2018-01-01

Taped problems is an intervention strategy for addressing mathematics fluency that has been evaluated in multiple single-case design studies. Although its efficacy has been supported in individual studies, no comprehensive quantitative synthesis has been conducted on taped problems. The purpose of this study was to synthesize the literature that…

Developing Instructional Leaders through Assistant Principals' Academy: A Partnership for Success

ERIC Educational Resources Information Center

Gurley, D. Keith; Anast-May, Linda; Lee, H. T.

2015-01-01

This article describes findings from a single-case qualitative study of a unique 2-year professional development academy for practicing assistant principals designed and implemented in partnership between school district personnel and university educational leadership faculty members. The study was conducted based on the theoretical framework of…

Professional Development to Increase Teacher Behavior-Specific Praise: A Single-Case Design Replication

ERIC Educational Resources Information Center

Gage, Nicholas A.; Grasley-Boy, Nicolette M.; MacSuga-Gage, Ashley S.

2018-01-01

Effective classroom instruction is contingent upon successful classroom management. Unfortunately, not all teachers successfully manage classroom behavior and need in-service professional development. In this study, we replicated a targeted professional development approach that included a brief one-on-one training session and emailed visual…

Teaching Integration with Layers and Representations: A Case Study

ERIC Educational Resources Information Center

Von Korff, Joshua; Rebello, N. Sanjay

2012-01-01

We designed a sequence of seven lessons to facilitate learning of integration in a physics context. We implemented this sequence with a single college sophomore, "Amber," who was concurrently enrolled in a first-semester calculus-based introductory physics course which covered topics in mechanics. We outline the philosophy underpinning these…

Open Crowdsourcing: Leveraging Community Software Developers for IT Projects

ERIC Educational Resources Information Center

Phair, Derek

2012-01-01

This qualitative exploratory single-case study was designed to examine and understand the use of volunteer community participants as software developers and other project related roles, such as testers, in completing a web-based application project by a non-profit organization. This study analyzed the strategic decision to engage crowd…

English in China's Language Policies for Higher Education

ERIC Educational Resources Information Center

Xu, Hongmei

2012-01-01

Taking ecological language planning and policy as its conceptual orientation and interpretive policy analysis as its methodological framework, and following an embedded single-case study design, this study explores the role of English, as compared with the role of Chinese, in China's educational language planning and policy for higher education.…

Organizational Commitment, Knowledge Management Interventions, and Learning Organization Capacity

ERIC Educational Resources Information Center

Massingham, Peter; Diment, Kieren

2009-01-01

Purpose: The purpose of this paper is to examine the relationship between organizational commitment and knowledge management initiatives in developing learning organization capacity (LOC). Design/methodology/approach: This is an empirical study based on a single case study, using partial least squares (PLS) analysis. Findings: The strategic…

Learning Spaces and Collaborative Work: Barriers or Supports?

ERIC Educational Resources Information Center

King, Hayley

2016-01-01

Drawing on 18 months of fieldwork, this article discusses the use of physical, virtual and social space to support collaborative work in translator education programs. The study adopted a contrastive ethnography approach that incorporated single- and multiple-case design rationales for site selection. Extended observation, informal chats and…

Efficacy of Coaching Preschool Teachers to Manage Challenging Behavior

ERIC Educational Resources Information Center

Brock, Matthew E.; Beaman-Diglia, Lauren E.

2018-01-01

Many early educators cite behavior management as a top professional development need. Evidence-based practices exist to address severe challenging behavior, but promoting implementation of these practices remains a challenge. In this single-case design study, two preschool teachers received coaching focused on implementing three evidence-based…

Satiation therapy: a procedure for reducing deviant sexual arousal.

PubMed Central

Marshall, W L

1979-01-01

Two single-case experiments demonstrated the efficacy of satiation therapy with adult males who had long-standing deviant sexual interests. The procedure involves the pairing of prolonged masturbation (1 hour) with the verbalization by the patient of his deviant sexual fantasies and in both cases the designs permitted the attribution of control over aberrant responding to the satiation therapy. The results are discussed in terms of the possible active ingredients of the procedure. PMID:511807

The effectiveness of therapeutic assessment with an adult client: a single-case study using a time-series design.

PubMed

Aschieri, Filippo; Smith, Justin D

2012-01-01

This article presents the therapeutic assessment (TA; Finn, 2007) of a traumatized young woman named Claire. Claire reported feeling debilitated by academic demands and the expectations of her parents, and was finding it nearly impossible to progress in her studies. She was also finding it difficult to develop and sustain intimate relationships. The emotional aspects of close relationships were extremely difficult for her and she routinely blamed herself for her struggles in this arena. The assessor utilized the TA model for adults, with the exception of not including an optional intervention session. The steps of TA, particularly the extended inquiry and the discussion of test findings along the way, cultivated a supportive and empathic atmosphere with Claire. By employing the single-case time-series experimental design used in previous TA studies (e.g., Smith, Handler, & Nash, 2010; Smith, Wolf, Handler, & Nash, 2009), the authors demonstrated that Claire experienced statistically significant improvement correlated with the onset of TA. Results indicated that participation in TA coincided with a positive shift in the trajectory of her reported symptoms and with recognizing the affection she held for others in her life. This case illustrates the successful application of case-based time-series methodology in the evaluation of an adult TA. The potential implications for future study are discussed.

Treatment of paranoid personality disorder with cognitive analytic therapy: a mixed methods single case experimental design.

PubMed

Kellett, Stephen; Hardy, Gillian

2014-01-01

Paranoid personality disorder (PPD) presents as chronic and widespread interpersonal distrust, whereby the actions of others are interpreted as malevolent and malicious. This research details the assessment, formulation and treatment of a case of PPD within a 24-session contract of cognitive analytic therapy (CAT). The outcome methodology was an A/B with extended follow-up single case experimental design (SCED). The SCED was supplemented with qualitative patient interviewing via the Change Interview regarding their experience of CAT, whether change had taken place and detailing of any identified change mechanisms. Quantitative results show that five out of the six daily rated paranoia target complaint measures were extinguished during the treatment phase. Qualitatively, the patient attributed change to the therapy conducted. The results suggest that CAT was an effective intervention in this case of PPD and are discussed in terms of identified methodological shortcomings, treatment implications and the potential for generating a convincing evidence base for the psychotherapy of PPD. Narrative reformulation using a CAT model offers a key opportunity for the patient to achieve a new understanding of their paranoia. Psychotherapy for PPD requires a cognitive component, within a boundaried and relational therapy, that is able to reflect on paranoid enactments and ruptures within the therapeutic relationship.There is a large role for clinician-researchers in developing a PPD outcome evidence base. Copyright © 2013 John Wiley & Sons, Ltd.

[The choice of the type of design in the clinical investigation studies. Case and control studies].

PubMed

Posada de la Paz, M

2004-09-01

Case-control studies are appropriate designs in neurology sciences to search for risk factors that have already occurred in a group of patients. In them, the subjects are selected on the basis of whether they have the disease or not and then they are compared in regards to the risk factor or prognosis investigated. These sorts of designs can be performed in a shorter and cheaper way than the regular cohort studies. They are appropriate for the evaluation of rare diseases and can examine multiple etiological factors for a single disease. On the contrary, they are not so efficient when rare exposures are involved. Incidence rates in exposed and non-exposed subjects cannot be calculated and on some occasions, the timing between exposure and outcome can be very difficult to establish. The Odds Ratio and its confident intervals is the measurement used for estimating the risk strength in this design. The clinical neurologist should be familiar with these terms, given the frequency of case-control studies described in neurology science literature, and should know their principal advantages and limitations.

A comparison of Cox and logistic regression for use in genome-wide association studies of cohort and case-cohort design.

PubMed

Staley, James R; Jones, Edmund; Kaptoge, Stephen; Butterworth, Adam S; Sweeting, Michael J; Wood, Angela M; Howson, Joanna M M

2017-06-01

Logistic regression is often used instead of Cox regression to analyse genome-wide association studies (GWAS) of single-nucleotide polymorphisms (SNPs) and disease outcomes with cohort and case-cohort designs, as it is less computationally expensive. Although Cox and logistic regression models have been compared previously in cohort studies, this work does not completely cover the GWAS setting nor extend to the case-cohort study design. Here, we evaluated Cox and logistic regression applied to cohort and case-cohort genetic association studies using simulated data and genetic data from the EPIC-CVD study. In the cohort setting, there was a modest improvement in power to detect SNP-disease associations using Cox regression compared with logistic regression, which increased as the disease incidence increased. In contrast, logistic regression had more power than (Prentice weighted) Cox regression in the case-cohort setting. Logistic regression yielded inflated effect estimates (assuming the hazard ratio is the underlying measure of association) for both study designs, especially for SNPs with greater effect on disease. Given logistic regression is substantially more computationally efficient than Cox regression in both settings, we propose a two-step approach to GWAS in cohort and case-cohort studies. First to analyse all SNPs with logistic regression to identify associated variants below a pre-defined P-value threshold, and second to fit Cox regression (appropriately weighted in case-cohort studies) to those identified SNPs to ensure accurate estimation of association with disease.

RANS Simulation (Rotating Reference Frame Model [RRF]) of Single Lab-Scaled DOE RM1 MHK Turbine

DOE Data Explorer

Javaherchi, Teymour; Stelzenmuller, Nick; Aliseda, Alberto; Seydel, Joseph

2014-04-15

Attached are the .cas and .dat files for the Reynolds Averaged Navier-Stokes (RANS) simulation of a single lab-scaled DOE RM1 turbine implemented in ANSYS FLUENT CFD-package. The lab-scaled DOE RM1 is a re-design geometry, based of the full scale DOE RM1 design, producing same power output as the full scale model, while operating at matched Tip Speed Ratio values at reachable laboratory Reynolds number (see attached paper). In this case study taking advantage of the symmetry of lab-scaled DOE RM1 geometry, only half of the geometry is models using (Single) Rotating Reference Frame model [RRF]. In this model RANS equations, coupled with k-\\omega turbulence closure model, are solved in the rotating reference frame. The actual geometry of the turbine blade is included and the turbulent boundary layer along the blade span is simulated using wall-function approach. The rotation of the blade is modeled by applying periodic boundary condition to sets of plane of symmetry. This case study simulates the performance and flow field in the near and far wake of the device at the desired operating conditions. The results of these simulations were validated against in-house experimental data. Please see the attached paper.

Comparing a single case to a control group - Applying linear mixed effects models to repeated measures data.

PubMed

Huber, Stefan; Klein, Elise; Moeller, Korbinian; Willmes, Klaus

2015-10-01

In neuropsychological research, single-cases are often compared with a small control sample. Crawford and colleagues developed inferential methods (i.e., the modified t-test) for such a research design. In the present article, we suggest an extension of the methods of Crawford and colleagues employing linear mixed models (LMM). We first show that a t-test for the significance of a dummy coded predictor variable in a linear regression is equivalent to the modified t-test of Crawford and colleagues. As an extension to this idea, we then generalized the modified t-test to repeated measures data by using LMMs to compare the performance difference in two conditions observed in a single participant to that of a small control group. The performance of LMMs regarding Type I error rates and statistical power were tested based on Monte-Carlo simulations. We found that starting with about 15-20 participants in the control sample Type I error rates were close to the nominal Type I error rate using the Satterthwaite approximation for the degrees of freedom. Moreover, statistical power was acceptable. Therefore, we conclude that LMMs can be applied successfully to statistically evaluate performance differences between a single-case and a control sample. Copyright © 2015 Elsevier Ltd. All rights reserved.

Trends Analysis of rhBMP2 Utilization in Single-Level Anterior Lumbar Interbody Fusion in the United States

PubMed Central

Lao, Lifeng; Cohen, Jeremiah R.; Buser, Zorica; Brodke, Darrel S.; Yoon, S. Tim; Youssef, Jim A.; Park, Jong-Beom; Meisel, Hans-Joerg; Wang, Jeffrey C.

2017-01-01

Study Design: Retrospective case study. Objective: To evaluate the trends and demographics of recombinant human bone morphogenetic protein 2 (rhBMP2) utilization in single-level anterior lumbar interbody fusion (ALIF) in the United States. Methods: Patients who underwent single-level ALIF from 2005 to 2011 were identified by searching ICD-9 diagnosis and procedure codes in the PearlDiver Patient Records Database (PearlDiver Technologies, Fort Wayne, IN), a national database of orthopedic insurance records. The year of procedure, age, gender, and region of the United States were analyzed for each patient. Results: A total of 921 patients were identified who underwent a single-level ALIF in this study. The average rate of single-level ALIF with rhBMP2 utilization increased (35%-48%) from 2005 to 2009, but sharply decreased to 16.7% in 2010 and 15.0% in 2011. The overall incidence of single-level ALIF without rhBMP2 (0.20 cases per 100 000 patients) was more than twice of the incidence of single-level ALIF with rhBMP2 (0.09 cases per 100 000 patients). The average rate of single-level ALIF with rhBMP2 utilization is highest in West (41.4%), followed by Midwest (33.3%), South (26.5%) and Northeast (22.2%). The highest incidence of single-level ALIF with rhBMP2 was observed in the group aged less than 65 years (compared with any other age groups, P < .001), with an incidence of 0.21 per 100 000 patients. Conclusions: The incidence of rhBMP2 utilization in single-level ALIF increased from 2006 to 2009, but decreased in 2010 and 2011. The Northeast region had the lowest incidence of rhBMP2 utilization. The group aged less than 65 years trended to have the higher incidence of single-level ALIF with rhBMP2 utilization. PMID:29662743

How to design a single-cell RNA-sequencing experiment: pitfalls, challenges and perspectives.

PubMed

Dal Molin, Alessandra; Di Camillo, Barbara

2018-01-31

The sequencing of the transcriptome of single cells, or single-cell RNA-sequencing, has now become the dominant technology for the identification of novel cell types in heterogeneous cell populations or for the study of stochastic gene expression. In recent years, various experimental methods and computational tools for analysing single-cell RNA-sequencing data have been proposed. However, most of them are tailored to different experimental designs or biological questions, and in many cases, their performance has not been benchmarked yet, thus increasing the difficulty for a researcher to choose the optimal single-cell transcriptome sequencing (scRNA-seq) experiment and analysis workflow. In this review, we aim to provide an overview of the current available experimental and computational methods developed to handle single-cell RNA-sequencing data and, based on their peculiarities, we suggest possible analysis frameworks depending on specific experimental designs. Together, we propose an evaluation of challenges and open questions and future perspectives in the field. In particular, we go through the different steps of scRNA-seq experimental protocols such as cell isolation, messenger RNA capture, reverse transcription, amplification and use of quantitative standards such as spike-ins and Unique Molecular Identifiers (UMIs). We then analyse the current methodological challenges related to preprocessing, alignment, quantification, normalization, batch effect correction and methods to control for confounding effects. © The Author(s) 2018. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A tool for assessing case history and feedback skills in audiology students working with simulated patients.

PubMed

Hughes, Jane; Wilson, Wayne J; MacBean, Naomi; Hill, Anne E

2016-12-01

To develop a tool for assessing audiology students taking a case history and giving feedback with simulated patients (SP). Single observation, single group design. Twenty-four first-year audiology students, five simulated patients, two clinical educators, and three evaluators. The Audiology Simulated Patient Interview Rating Scale (ASPIRS) was developed consisting of six items assessing specific clinical skills, non-verbal communication, verbal communication, interpersonal skills, interviewing skills, and professional practice skills. These items are applied once for taking a case history and again for giving feedback. The ASPIRS showed very high internal consistency (α = 0.91-0.97; mean inter-item r = 0.64-0.85) and fair-to-moderate agreement between evaluators (29.2-54.2% exact and 79.2-100% near agreement; κ weighted up to 0.60). It also showed fair-to-moderate absolute agreement amongst evaluators for single evaluator scores (intraclass correlation coefficient [ICC] r = 0.35-0.59) and substantial consistency of agreement amongst evaluators for three-evaluator averaged scores (ICC r = 0.62-0.81). Factor analysis showed the ASPIRS' 12 items fell into two components, one containing all feedback items and one containing all case history items. The ASPIRS shows promise as the first published tool for assessing audiology students taking a case history and giving feedback with an SP.

Simultaneous Aerodynamic Analysis and Design Optimization (SAADO) for a 3-D Flexible Wing

NASA Technical Reports Server (NTRS)

Gumbert, Clyde R.; Hou, Gene J.-W.

2001-01-01

The formulation and implementation of an optimization method called Simultaneous Aerodynamic Analysis and Design Optimization (SAADO) are extended from single discipline analysis (aerodynamics only) to multidisciplinary analysis - in this case, static aero-structural analysis - and applied to a simple 3-D wing problem. The method aims to reduce the computational expense incurred in performing shape optimization using state-of-the-art Computational Fluid Dynamics (CFD) flow analysis, Finite Element Method (FEM) structural analysis and sensitivity analysis tools. Results for this small problem show that the method reaches the same local optimum as conventional optimization. However, unlike its application to the win,, (single discipline analysis), the method. as I implemented here, may not show significant reduction in the computational cost. Similar reductions were seen in the two-design-variable (DV) problem results but not in the 8-DV results given here.

Speech characteristics after articulation therapy in children with cleft palate and velopharyngeal dysfunction - A single case experimental design.

PubMed

Derakhshandeh, Fatemeh; Nikmaram, Mohammadreza; Hosseinabad, Hedieh Hashemi; Memarzadeh, Mehrdad; Taheri, Masoud; Omrani, Mohammadreza; Jalaie, Shohreh; Bijankhan, Mahmood; Sell, Debbie

2016-07-01

The aim of this study was to investigate the impact of an intensive 10-week course of articulation therapy on articulation errors in cleft lip and palate patients who have Velopharyngeal Insufficiency (VPI), non-oral and passive cleft speech characteristics. Five children with cleft palate (+/-cleft lip) with VPI and non-oral and passive cleft speech characteristics underwent 40 intensive articulation therapies over 10 weeks in a single case experimental design. The percentage of non-oral CSCs (NCSCs), passive CSCs (PCSCs), stimulable consonants (SC), correct consonants in word imitation (CCI), and correct consonants in picture naming (CCN) were captured at baseline, during intervention and in follow up phases. Visual analysis and two effect size indexes of Percentage of Nonoverlapping Data and Percentage of Improvement Rate Difference were analyzed. Articulation therapy resulted in visible decrease in NCSCs for all 5 participants across the intervention phases. Intervention was effective in changing percentage of passive CSCs in two different ways; it reduced the PCSCs in three cases and resulted in an increase in PCSCs in the other two cases. This was interpreted as intervention having changed the non-oral CSCs to consonants produced within the oral cavity but with passive characteristics affecting manner of production including weakness, nasalized plosives and nasal realizations of plosives and fricatives. Percent SC increased throughout the intervention period in all five patients. All participants demonstrated an increase in percentage of CCI and CCN suggesting an increase in the consonant inventory. Follow-up data showed that all the subjects were able to maintain their ability to articulate learned phonemes correctly even after a 4-week break from intervention. This single case experimental study supports the hypothesis that speech intervention in patients with VPI can result in an improvement in oral placements and passive CSCs. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Development of an electromagnetic imaging system for well bore integrity inspection

NASA Astrophysics Data System (ADS)

Plotnikov, Yuri; Wheeler, Frederick W.; Mandal, Sudeep; Climent, Helene C.; Kasten, A. Matthias; Ross, William

2017-02-01

State-of-the-art imaging technologies for monitoring the integrity of oil and gas well bores are typically limited to the inspection of metal casings and cement bond interfaces close to the first casing region. The objective of this study is to develop and evaluate a novel well-integrity inspection system that is capable of providing enhanced information about the flaw structure and topology of hydrocarbon producing well bores. In order to achieve this, we propose the development of a multi-element electromagnetic (EM) inspection tool that can provide information about material loss in the first and second casing structure as well as information about eccentricity between multiple casing strings. Furthermore, the information gathered from the EM inspection tool will be combined with other imaging modalities (e.g. data from an x-ray backscatter imaging device). The independently acquired data are then fused to achieve a comprehensive assessment of integrity with greater accuracy. A test rig composed of several concentric metal casings with various defect structures was assembled and imaged. Initial test results were obtained with a scanning system design that includes a single transmitting coil and several receiving coils mounted on a single rod. A mechanical linear translation stage was used to move the EM sensors in the axial direction during data acquisition. For simplicity, a single receiving coil and repetitive scans were employed to simulate performance of the designed receiving sensor array system. The resulting electromagnetic images enable the detection of the metal defects in the steel pipes. Responses from several sensors were used to assess the location and amount of material loss in the first and second metal pipe as well as the relative eccentric position between these two pipes. The results from EM measurements and x-ray backscatter simulations demonstrate that data fusion from several sensing modalities can provide an enhanced assessment of flaw structures in producing well bores and potentially allow for early detection of anomalies that if undetected might lead to catastrophic failures.

Designing a complex intervention for dementia case management in primary care

PubMed Central

2013-01-01

Background Community-based support will become increasingly important for people with dementia, but currently services are fragmented and the quality of care is variable. Case management is a popular approach to care co-ordination, but evidence to date on its effectiveness in dementia has been equivocal. Case management interventions need to be designed to overcome obstacles to care co-ordination and maximise benefit. A successful case management methodology was adapted from the United States (US) version for use in English primary care, with a view to a definitive trial. Medical Research Council guidance on the development of complex interventions was implemented in the adaptation process, to capture the skill sets, person characteristics and learning needs of primary care based case managers. Methods Co-design of the case manager role in a single NHS provider organisation, with external peer review by professionals and carers, in an iterative technology development process. Results The generic skills and personal attributes were described for practice nurses taking up the case manager role in their workplaces, and for social workers seconded to general practice teams, together with a method of assessing their learning needs. A manual of information material for people with dementia and their family carers was also created using the US intervention as its source. Conclusions Co-design produces rich products that have face validity and map onto the complexities of dementia and of health and care services. The feasibility of the case manager role, as described and defined by this process, needs evaluation in ‘real life’ settings. PMID:23865537

1.2.1.1 Harvest, Collection and Storage Quarter 3 Milestone Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wendt, Lynn M.; Smith, William A.; Cafferty, Kara G.

Single pass baling of corn stover is required in order to meet targets for the herbaceous biomass 2017 logistics design case. Single-pass pass stover harvest is based on the grain harvest and generally results in stover with a moisture content of 30-50% wet basis (w.b). Aerobic storage of corn stover with high moisture results in high levels of dry matter loss (DML), up to 25%. Anaerobic storage (ensiling) reduces DML to less than 5%, but additional costs are associated with handling and transporting the extra moisture in the biomass. This milestone provides a best-estimate of costs for using high moisturemore » feedstock within the conventional baled logistics system. The costs of three (3) anaerobic storage systems that reduce dry matter losses (bale wrap, silage tube, and silage drive over pile) are detailed in this milestone and compared to both a conventional dry-baled corn stover case and a high moisture bale case, both stored aerobically. The total logistics cost (harvest, collection, storage, and transportation) of the scenarios are as follows: the conventional multi-pass dry bale case and the single-pass high moisture case stored aerobically were nearly equivalent at $61.15 and $61.24/DMT. The single-pass bale wrap case was the lowest at $57.63/DMT. The bulk anaerobic cases were the most expensive at $84.33 for the silage tube case and $75.97 for the drive over pile, which reflect the additional expense of transporting high-moisture bulk material; however, a reduction in preprocessing costs may occur because these feedstocks are size reduced in the field. In summary, the costs estimates presented in this milestone report can be used to determine if anaerobic storage of high-moisture corn stover is an economical option for dry matter preservation.« less

In vivo versus simulation training: an interactional analysis of range and type of training exemplars.

PubMed Central

Neef, N A; Lensbower, J; Hockersmith, I; DePalma, V; Gray, K

1990-01-01

We analyzed the role of the range of variation in training exemplars as a contextual variable influencing the effects of in vivo versus simulation training in producing generalized responding. Four mentally retarded adults received single case instruction, followed by general case instruction, on washing machine and dryer use; one task was taught using actual appliances (in vivo) and the other using simulation. In vivo and simulation training were counterbalanced across the two tasks for the 2 subject pairs, using a within-subjects Latin square design. With both paradigms, more errors were made after single case than after general case instruction during probe sessions with untrained washing machines and dryers. These results suggest that generalization errors were affected by the range of training exemplars and not by the use of simulated versus natural training stimuli. Although both general case simulation and general case in vivo training facilitated generalized performance of laundry skills, an analysis of training time and costs indicated that the former approach was more efficient. The study illustrates a methodology for studying complex interactions and guiding decisions on the optimal use of instructional alternatives. PMID:2074236

Deformation and Life Analysis of Composite Flywheel Disk and Multi-disk Systems

NASA Technical Reports Server (NTRS)

Arnold, S. M.; Saleeb, A. F.; AlZoubi, N. R.

2001-01-01

In this study an attempt is made to put into perspective the problem of a rotating disk, be it a single disk or a number of concentric disks forming a unit. An analytical model capable of performing an elastic stress analysis for single/multiple, annular/solid, anisotropic/isotropic disk systems, subjected to both pressure surface tractions, body forces (in the form of temperature-changes and rotation fields) and interfacial misfits is derived and discussed. Results of an extensive parametric study are presented to clearly define the key design variables and their associated influence. In general the important parameters were identified as misfit, mean radius, thickness, material property and/or load gradation, and speed; all of which must be simultaneously optimized to achieve the "best" and most reliable design. Also, the important issue of defining proper performance/merit indices (based on the specific stored energy), in the presence of multiaxiality and material anisotropy is addressed. These merit indices are then utilized to discuss the difference between flywheels made from PMC and TMC materials with either an annular or solid geometry. Finally two major aspects of failure analysis, that is the static and cyclic limit (burst) speeds are addressed. In the case of static limit loads, upper, lower, and out-of-plane bounds for disks with constant thickness are presented for both the case of internal pressure loading (as one would see in a hydroburst test) and pure rotation (as in the case of a free spinning disk). The results (interaction diagrams) are displayed graphically in designer friendly format. For the case of fatigue, a representative fatigue/life master curve is illustrated in which the normalized limit speed versus number of applied cycles is given for a cladded TMC disk application.

Meta-Analysis of Single-Case Research Design Studies on Instructional Pacing.

PubMed

Tincani, Matt; De Mers, Marilyn

2016-11-01

More than four decades of research on instructional pacing has yielded varying and, in some cases, conflicting findings. The purpose of this meta-analysis was to synthesize single-case research design (SCRD) studies on instructional pacing to determine the relative benefits of brisker or slower pacing. Participants were children and youth with and without disabilities in educational settings, excluding higher education. Tau-U, a non-parametric statistic for analyzing data in SCRD studies, was used to determine effect size estimates. The article extraction yielded 13 instructional pacing studies meeting contemporary standards for high quality SCRD research. Eleven of the 13 studies reported small to large magnitude effects when two or more pacing parameters were compared, suggesting that instructional pacing is a robust instructional variable. Brisker instructional pacing with brief inter-trial interval (ITI) produced small increases in correct responding and medium to large reductions in challenging behavior compared with extended ITI. Slower instructional pacing with extended wait-time produced small increases in correct responding, but also produced small increases in challenging behavior compared with brief wait-time. Neither brief ITI nor extended wait-time meets recently established thresholds for evidence-based practice, highlighting the need for further instructional pacing research. © The Author(s) 2016.

Vapor port and groundwater sampling well

DOEpatents

Hubbell, Joel M.; Wylie, Allan H.

1996-01-01

A method and apparatus has been developed for combining groundwater monitoring wells with unsaturated-zone vapor sampling ports. The apparatus allows concurrent monitoring of both the unsaturated and the saturated zone from the same well at contaminated areas. The innovative well design allows for concurrent sampling of groundwater and volatile organic compounds (VOCs) in the vadose (unsaturated) zone from a single well, saving considerable time and money. The sample tubes are banded to the outer well casing during installation of the well casing.

Vapor port and groundwater sampling well

DOEpatents

Hubbell, J.M.; Wylie, A.H.

1996-01-09

A method and apparatus have been developed for combining groundwater monitoring wells with unsaturated-zone vapor sampling ports. The apparatus allows concurrent monitoring of both the unsaturated and the saturated zone from the same well at contaminated areas. The innovative well design allows for concurrent sampling of groundwater and volatile organic compounds (VOCs) in the vadose (unsaturated) zone from a single well, saving considerable time and money. The sample tubes are banded to the outer well casing during installation of the well casing. 10 figs.

The Caterpillar Game: A SW-PBIS Aligned Classroom Management System

ERIC Educational Resources Information Center

Floress, Margaret T.; Jacoby, Amber L.

2017-01-01

The Caterpillar Game is a classroom management system that is aligned with School-wide Positive Behavioral Interventions and Supports standards. A single-case, multiple-baseline design was used to evaluate the effects of the Caterpillar Game on disruptive student behavior and teacher praise. Three classrooms were included in the study (preschool,…

Mid-Career Construction Counselling to Instill Spiritual Awareness and Allay Fear

ERIC Educational Resources Information Center

Maree, J. G.

2017-01-01

This article reports on the value of career construction counselling for a black man facing a career crossroads. The participant was purposefully selected from a number of people participating in a career construction counselling course who had sought career counselling. An intrinsic, single-case study design was implemented and a qualitative,…

A Pilot Study of Integrated Listening Systems for Children with Sensory Processing Problems

ERIC Educational Resources Information Center

Schoen, Sarah A.; Miller, Lucy J.; Sullivan, Jillian

2015-01-01

This pilot study explored the effects of Integrated Listening Systems (iLs) Focus Series on individualized parent goals for children with sensory processing impairments. A nonconcurrent multiple baseline, repeated measure across participants, single-case study design was employed (n = 7). The 40-session intervention was delivered at home and in…

Coaching Preservice Teachers to Teach Play Skills to Children with Disabilities

ERIC Educational Resources Information Center

Barton, Erin E.; Chen, Ching-I; Pribble, Lois; Pomes, Maria; Kim, Young-Ah

2013-01-01

The purpose of this article is to describe two studies that examined the effects of training and coaching on preservice teachers' implementation of an intervention focused on teaching play to young children with disabilities. A multiple-baseline across teachers single-case research design was used to systematically examine the relation between…

A Modified Dialogic Reading Intervention for Preschool Children with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Fleury, Veronica P.; Schwartz, Ilene S.

2017-01-01

We examined the effect of a modified dialogic reading intervention on levels of verbal participation and vocabulary growth in nine preschool children with autism spectrum disorder (ASD) using single-case design methodology. Baseline book reading resulted in consistently low levels of verbal participation followed by an immediate increase in verbal…

Findings across Practitioner Training Studies in Special Education: A Comprehensive Review and Meta-Analysis

ERIC Educational Resources Information Center

Brock, Matthew E.; Cannella-Malone, Helen I.; Seaman, Rachel L.; Andzik, Natalie R.; Schaefer, John M.; Page, E. Justin; Barczak, Mary A.; Dueker, Scott A.

2017-01-01

Existing reviews address important questions about subsets of practitioner training studies in special education but leave important questions about the broader literature unanswered. In this comprehensive review, we identified 118 peer-reviewed single-case-design studies in which researchers tested the efficacy of practitioner training on…

Findings across Practitioner Training Studies in Special Education: A Comprehensive Review and Meta-Analysis

ERIC Educational Resources Information Center

Brock, Matthew E.; Cannella-Malone, Helen I.; Seaman, Rachel L.; Andzik, Natalie R.; Schaefer, John M.; Page, E. Justin; Barczak, Mary A.; Dueker, Scott A.

2017-01-01

Existing reviews answer important questions about subsets of practitioner training studies in special education, but leave important questions about the broader literature unanswered. In this comprehensive review, we identified 118 peer-reviewed single-case design studies in which researchers tested the efficacy of practitioner training on…

Coaching Teachers to Support Child Communication across Daily Routines in Early Head Start Classrooms

ERIC Educational Resources Information Center

Friedman, Mollie; Woods, Juliann

2015-01-01

This study investigates the use of a situated coaching protocol in Early Head Start (EHS) classrooms to increase teachers' use of communication facilitation strategies with children identified with delays during typical play and caregiving routines. A single-case, multiple baseline design across 3 EHS teachers and children with communication…

Meta-Analysis of the Effects of Academic Interventions and Modifications on Student Behavior Outcomes

ERIC Educational Resources Information Center

Warmbold-Brann, Kristy; Burns, Matthew K.; Preast, June L.; Taylor, Crystal N.; Aguilar, Lisa N.

2017-01-01

The current study examined the effect of academic interventions and modifications on behavioral outcomes in a meta-analysis of 32 single-case design studies. Academic interventions included modifying task difficulty, providing instruction in reading, mathematics, or writing, and contingent reinforcement for academic performance. There was an…

The Effect of a Self-Monitored Relaxation Breathing Exercise on Male Adolescent Aggressive Behavior

ERIC Educational Resources Information Center

Gaines, Trudi; Barry, Leasha M.

2008-01-01

This study sought to contribute to the identification of effective interventions in the area of male adolescent aggressive behavior. Existing research includes both group- and single-case studies implementing treatments which typically include an anger-management component and its attendant relaxation and stress-reduction techniques. The design of…

Assessment and Management of the Communication Difficulties of Children with Cerebral Palsy: A UK Survey of SLT Practice

ERIC Educational Resources Information Center

Watson, Rose Mary; Pennington, Lindsay

2015-01-01

Background: Communication difficulties are common in cerebral palsy (CP) and are frequently associated with motor, intellectual and sensory impairments. Speech and language therapy research comprises single-case experimental design and small group studies, limiting evidence-based intervention and possibly exacerbating variation in practice. Aims:…

A Spoken-Language Intervention for School-Aged Boys with Fragile X Syndrome

ERIC Educational Resources Information Center

McDuffie, Andrea; Machalicek, Wendy; Bullard, Lauren; Nelson, Sarah; Mello, Melissa; Tempero-Feigles, Robyn; Castignetti, Nancy; Abbeduto, Leonard

2016-01-01

Using a single case design, a parent-mediated spoken-language intervention was delivered to three mothers and their school-aged sons with fragile X syndrome, the leading inherited cause of intellectual disability. The intervention was embedded in the context of shared storytelling using wordless picture books and targeted three empirically derived…

77 FR 51027 - Agency Information Collection Activities; Proposed Collection; Comment Request; Communicating...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

... one research project cannot test them all. In this study, we have chosen to examine three different...) Advertising.'' This study is designed to explore how consumers understand and interpret composite endpoint... clinical trials (Refs. 1 and 2). In some cases, drug efficacy can be measured by a single endpoint, such as...

Evidence-Based Practice for Teachers of Children with Autism: A Dynamic Approach

ERIC Educational Resources Information Center

Lubas, Margaret; Mitchell, Jennifer; De Leo, Gianluca

2016-01-01

Evidence-based practice related to autism research is a controversial topic. Governmental entities and national agencies are defining evidence-based practice as a specific set of interventions that educators should implement; however, large-scale efforts to generalize autism research, which are often single-subject case designs, may be a setback…

Examining the Practicum Experience to Increase Counseling Students' Self-Efficacy

ERIC Educational Resources Information Center

Ikonomopoulos, James; Vela, Javier Cavazos; Smith, Wayne D.; Dell'Aquila, Julia

2016-01-01

Counseling graduate students may begin practicum with low self-efficacy regarding their counseling abilities and skills. In the current study, we implemented a small-series (N = 11) single-case research design to assess the effectiveness of the practicum experience to increase counseling students' self-efficacy. Analysis of participants' scores on…

Meta-Analysis of Mathematic Basic-Fact Fluency Interventions: A Component Analysis

ERIC Educational Resources Information Center

Codding, Robin S.; Burns, Matthew K.; Lukito, Gracia

2011-01-01

Mathematics fluency is a critical component of mathematics learning yet few attempts have been made to synthesize this research base. Seventeen single-case design studies with 55 participants were reviewed using meta-analytic procedures. A component analysis of practice elements was conducted and treatment intensity and feasibility were examined.…

Testing the Intervention Effect in Single-Case Experiments: A Monte Carlo Simulation Study

ERIC Educational Resources Information Center

Heyvaert, Mieke; Moeyaert, Mariola; Verkempynck, Paul; Van den Noortgate, Wim; Vervloet, Marlies; Ugille, Maaike; Onghena, Patrick

2017-01-01

This article reports on a Monte Carlo simulation study, evaluating two approaches for testing the intervention effect in replicated randomized AB designs: two-level hierarchical linear modeling (HLM) and using the additive method to combine randomization test "p" values (RTcombiP). Four factors were manipulated: mean intervention effect,…

eCoaching: The Effects on Co-Teachers' Planning and Instruction

ERIC Educational Resources Information Center

Ploessl, Donna M.; Rock, Marcia L.

2014-01-01

Although co-teaching has become a popular approach to special education service provision in inclusive classrooms, practitioners have struggled to carry it out well. One suggestion for improvement has been to provide co-teachers with training that includes coaching. In this study, we used single-case (ABAB) withdrawal design, to investigate the…

Increasing Math Milieu Teaching by Varying Levels of Consultation Support: An Example of Analyzing Intervention Strength

ERIC Educational Resources Information Center

Marsicano, Richard T.; Morrison, Julie Q.; Moomaw, Sally C.; Fite, Nathan M.; Kluesener, Courtney M.

2015-01-01

The current study used a single-case design to examine two performance feedback conditions varying in intensity on the frequency of naturalistic math instruction in preschool classrooms during non-instructional times (transition, lunch, free play). Three Head Start teachers received professional development that combined information on four…

Assessing Cardiovascular Responses to Stressors in Individuals with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Groden, June; Goodwin, Matthew S.; Baron, M. Grace; Groden, Gerald; Velicer, Wayne F.; Lipsitt, Lewis P.; Hofmann, Stefan G.; Plummer, Brett

2005-01-01

Characteristics of persons with autism and other developmental disabilities may make this population especially vulnerable to the effects of stress. Prior research on stress and its measurement in this population is reviewed. Using a single-case multi-element design, this study explores the feasibility of measuring cardiovascular responses to four…

The Power of Verbal Scaffolding: "Showing" Beginning Readers How to Use Reading Strategies

ERIC Educational Resources Information Center

Ankrum, Julie W.; Genest, Maria T.; Belcastro, Elizabeth G.

2014-01-01

A single case study design was employed to describe the nature of one teacher's verbal scaffolding used during differentiated reading instruction in a kindergarten classroom. The teacher participant was selected from a group of exemplary teachers nominated from two school districts in southwestern Pennsylvania. Multiple sources of data, including…

A Writing Intervention to Teach Simple Sentences and Descriptive Paragraphs to Adolescents with Writing Difficulties

ERIC Educational Resources Information Center

Datchuk, Shawn M.; Kubina, Richard M., Jr.

2017-01-01

The present study used a multiple-baseline, single-case experimental design to investigate the effects of a multicomponent intervention on construction of simple sentences and word sequences. The intervention entailed sequential delivery of sentence instruction and frequency building to a performance criterion and paragraph instruction.…

Student and Instructor Responses to Emotional Motivational Feedback Messages in an Online Instructional Environment

ERIC Educational Resources Information Center

Sarsar, Firat

2017-01-01

The purpose of this study was to investigate the effectiveness of Emotional Motivational Feedback Message (EMFEM) in an online learning environment. This exploratory research was conducted using mixed method single case study design. Participants were 15 undergraduate students enrolled in an instructional technology course in a large state…

Differential Effects of Reinforcement on the Self-Monitoring of On-Task Behavior

ERIC Educational Resources Information Center

Otero, Tiffany L.; Haut, Jillian M.

2016-01-01

In the current study, the differential effects of reinforcement on a self-monitoring intervention were evaluated. Three students nominated by their teachers for having a marked difficultly maintaining on-task behaviors participated in the study. Using an alternating treatments single-case design to assess self-monitoring with and without…

Read-Aloud Accommodations, Expository Text, and Adolescents with Learning Disabilities

ERIC Educational Resources Information Center

Meyer, Nancy K.; Bouck, Emily C.

2017-01-01

Adolescents with learning disabilities in reading have difficulties with reading and understanding difficult gradelevel curricular material. One frequently used method of support is using read-aloud accommodations, which can be live read-alouds or text-to-speech (TTS) read-alouds. A single case alternating treatment design was used to examine the…

Teaching Children with Language-Learning Disabilities to Plan and Revise Compare-Contrast Texts

ERIC Educational Resources Information Center

Shen, Mei; Troia, Gary A.

2018-01-01

This study used a multiple-probe, multiple-baseline single-case design to investigate the efficacy of planning, and then revising strategy instruction using self-regulated strategy development on the compare-contrast writing performance of three late elementary students with language-learning disabilities. After receiving the planning instruction,…

Today's Vodcast: Sunny and Clear, with an Increased Chance of Learning

ERIC Educational Resources Information Center

Shankar-Brown, Rajni; Brown, Benjamin

2014-01-01

This study examines vodcasting as an effective instructional activity that can transform students' negative feelings about reading and book reports into more positive experiences. The study employed a qualitative research paradigm and single-case study research design to investigate the impact of using vodcasting in a middle grades language arts…

Alliance-focused therapy for anorexia nervosa: integrative relational and behavioral change treatments in a single-case experimental design.

PubMed

Satir, Dana A; Goodman, David M; Shingleton, Rebecca M; Porcerelli, John H; Gorman, Bernard S; Pratt, Elizabeth M; Barlow, David H; Thompson-Brenner, Heather

2011-12-01

Evidence supporting outpatient treatments for anorexia nervosa (AN) is severely lacking, due to low retention and poor outcome. One explanation for drop-out is weak treatment alliances. A single-case experimental analysis accompanied by in-depth qualitative description is presented for Ms. O, who received a novel treatment for AN called Alliance Focused Treatment (AFT) that attends to ruptures in the alliance, interpersonal difficulties and emotional avoidance. At intake Ms. O met diagnostic criteria for AN, Major Depressive Disorder, and Social Phobia. She was characterized as having symptoms of Obsessive Compulsive, Avoidant, and Depressive personality disorders. Treatment began with a Baseline followed by the experimental (AFT) and comparison treatments (Behavioral Change Treatment [BCT]) using a replicated experimental single-case phase change design. Graphs of slopes of kilocalorie and alliance change facilitated observation of treatment effects. Ms. O participated in 16 sessions of AFT and 8 sessions of BCT with specific benefits. Ratings of the treatment alliance were consistently high and she evidenced significant changes in weight, quality of life, and personality pathology. Associations between rupture/repair episodes and kilocalorie increases were observed. The utility of the treatment relationship in facilitating emotional expression was evident. At posttreatment, Ms. O endorsed cognitive AN symptoms, although these were not explicitly treated. This study provides preliminary support for the feasibility and effect of AFT and BCT, and highlights the importance of the alliance in treating adults with AN. Further research on emotion regulation in AN and its effect on the treatment relationship are needed.

Effectiveness and feasibility of Socratic feedback to increase awareness of deficits in patients with acquired brain injury: Four single-case experimental design (SCED) studies.

PubMed

Schrijnemaekers, Anne-Claire M C; Winkens, Ieke; Rasquin, Sascha M C; Verhaeg, Annette; Ponds, Rudolf W H M; van Heugten, Caroline M

2018-06-29

To investigate the effectiveness and feasibility of a Socratic feedback programme to improve awareness of deficits in patients with acquired brain injury (ABI). Rehabilitation centre. Four patients with ABI with awareness problems. A series of single-case experimental design studies with random intervention starting points (A-B + maintenance design). Rate of trainer-feedback and self-control behaviour on everyday tasks, patient competency rating scale (PCRS), self-regulating skills interview (SRSI), hospital anxiety and depression scale. All patients needed less trainer feedback, the change was significant in 3 out of 4. One patient increased in overt self-corrective behaviour. SRSI performance increased in all patients (medium to strong effect size), and PCRS performance increased in two patients (medium and strong effect size). Mood and anxiety levels were elevated in one patient at the beginning of the training and decreased to normal levels at the end of the training. The feasibility of the programme was scored 9 out of 10. The Socratic feedback method is a promising intervention for improving awareness of deficits in patients with ABI. Controlled studies with larger populations are needed to draw more solid conclusions about the effect of this method.

Attention Process Training-3 to improve reading comprehension in mild aphasia: A single-case experimental design study.

PubMed

Lee, Jaime B; Sohlberg, McKay Moore; Harn, Beth; Horner, Robert; Cherney, Leora R

2018-06-04

People with aphasia frequently present with nonlinguistic deficits, in addition to their compromised language abilities, which may contribute to their problems with reading comprehension. Treatment of attention, working memory and executive control may improve reading comprehension in individuals with aphasia, particularly those with mild reading problems. This single-case experimental design study evaluated the efficacy of Attention Process Training-3, an intervention combining direct attention training and metacognitive facilitation, for improving reading comprehension in individuals with mild aphasia. A multiple baseline design across six participants was used to evaluate treatment effects. The primary outcome measure was a maze reading task. Cognitive measures were administered pre- and post-treatment. Visual inspection of graphed maze reading performance data indicated a basic effect between APT-3 and improved maze reading for three of the six participants. Quantitative analyses, using Tau-U, corroborated findings identified through visual analysis. The overall effect size was significant (Tau = .48, p = .01). Results suggest that APT-3 has the potential to improve reading in individuals with aphasia, but that it may be more efficacious under certain conditions. Treatment and participant variables, including intensity of treatment and metacognitive strategy usage, are discussed as potential influences on participants' responsiveness to APT-3.

A Homogenization Approach for Design and Simulation of Blast Resistant Composites

NASA Astrophysics Data System (ADS)

Sheyka, Michael

Structural composites have been used in aerospace and structural engineering due to their high strength to weight ratio. Composite laminates have been successfully and extensively used in blast mitigation. This dissertation examines the use of the homogenization approach to design and simulate blast resistant composites. Three case studies are performed to examine the usefulness of different methods that may be used in designing and optimizing composite plates for blast resistance. The first case study utilizes a single degree of freedom system to simulate the blast and a reliability based approach. The first case study examines homogeneous plates and the optimal stacking sequence and plate thicknesses are determined. The second and third case studies use the homogenization method to calculate the properties of composite unit cell made of two different materials. The methods are integrated with dynamic simulation environments and advanced optimization algorithms. The second case study is 2-D and uses an implicit blast simulation, while the third case study is 3-D and simulates blast using the explicit blast method. Both case studies 2 and 3 rely on multi-objective genetic algorithms for the optimization process. Pareto optimal solutions are determined in case studies 2 and 3. Case study 3 is an integrative method for determining optimal stacking sequence, microstructure and plate thicknesses. The validity of the different methods such as homogenization, reliability, explicit blast modeling and multi-objective genetic algorithms are discussed. Possible extension of the methods to include strain rate effects and parallel computation is also examined.

Launch Vehicle Propulsion Design with Multiple Selection Criteria

NASA Technical Reports Server (NTRS)

Shelton, Joey D.; Frederick, Robert A.; Wilhite, Alan W.

2005-01-01

The approach and techniques described herein define an optimization and evaluation approach for a liquid hydrogen/liquid oxygen single-stage-to-orbit system. The method uses Monte Carlo simulations, genetic algorithm solvers, a propulsion thermo-chemical code, power series regression curves for historical data, and statistical models in order to optimize a vehicle system. The system, including parameters for engine chamber pressure, area ratio, and oxidizer/fuel ratio, was modeled and optimized to determine the best design for seven separate design weight and cost cases by varying design and technology parameters. Significant model results show that a 53% increase in Design, Development, Test and Evaluation cost results in a 67% reduction in Gross Liftoff Weight. Other key findings show the sensitivity of propulsion parameters, technology factors, and cost factors and how these parameters differ when cost and weight are optimized separately. Each of the three key propulsion parameters; chamber pressure, area ratio, and oxidizer/fuel ratio, are optimized in the seven design cases and results are plotted to show impacts to engine mass and overall vehicle mass.

Identification of vehicle suspension parameters by design optimization

NASA Astrophysics Data System (ADS)

Tey, J. Y.; Ramli, R.; Kheng, C. W.; Chong, S. Y.; Abidin, M. A. Z.

2014-05-01

The design of a vehicle suspension system through simulation requires accurate representation of the design parameters. These parameters are usually difficult to measure or sometimes unavailable. This article proposes an efficient approach to identify the unknown parameters through optimization based on experimental results, where the covariance matrix adaptation-evolutionary strategy (CMA-es) is utilized to improve the simulation and experimental results against the kinematic and compliance tests. This speeds up the design and development cycle by recovering all the unknown data with respect to a set of kinematic measurements through a single optimization process. A case study employing a McPherson strut suspension system is modelled in a multi-body dynamic system. Three kinematic and compliance tests are examined, namely, vertical parallel wheel travel, opposite wheel travel and single wheel travel. The problem is formulated as a multi-objective optimization problem with 40 objectives and 49 design parameters. A hierarchical clustering method based on global sensitivity analysis is used to reduce the number of objectives to 30 by grouping correlated objectives together. Then, a dynamic summation of rank value is used as pseudo-objective functions to reformulate the multi-objective optimization to a single-objective optimization problem. The optimized results show a significant improvement in the correlation between the simulated model and the experimental model. Once accurate representation of the vehicle suspension model is achieved, further analysis, such as ride and handling performances, can be implemented for further optimization.

Design, construction, and technical implementation of a web-based interdisciplinary symptom evaluation (WISE) - a heuristic proposal for orofacial pain and temporomandibular disorders.

PubMed

Ettlin, Dominik A; Sommer, Isabelle; Brönnimann, Ben; Maffioletti, Sergio; Scheidt, Jörg; Hou, Mei-Yin; Lukic, Nenad; Steiger, Beat

2016-12-01

Medical symptoms independent of body location burden individuals to varying degrees and may require care by more than one expert. Various paper and computer-based tools exist that aim to comprehensively capture data for optimal clinical management and research. A web-based interdisciplinary symptom evaluation (WISE) was newly designed, constructed, and technically implemented. For worldwide applicability and to avoid copyright infringements, open source software tools and free validated questionnaires available in multiple languages were used. Highly secure data storage limits access strictly to those who use the tool for collecting, storing, and evaluating their data. Concept and implementation is illustrated by a WISE sample tailored for the requirements of a single center in Switzerland providing interdisciplinary care to orofacial pain and temporomandibular disorder patients. By combining a symptom- burden checklist with in-depth questionnaires serving as case-finding instruments, an algorithm was developed that assists in clarifying case complexity and need for targeted expert evaluation. This novel modular approach provides a personalized, response-tailored instrument for the time- and cost-effective collection of symptom-burden focused quantitative data. The tool includes body drawing options and instructional videos. It is applicable for biopsychosocial evaluation in a variety of clinical settings and offers direct feedback by a case report summary. In clinical practice, the new instrument assists in clarifying case complexity and referral need, based on symptom burden and response -tailored case finding. It provides single-case summary reports from a biopsychosocial perspective and includes graphical symptom maps. Secure, centrally stored data collection of anonymous data is possible. The tool enables personalized medicine, facilitates interprofessional education and collaboration, and allows for multicenter patient-reported outcomes research.

Performance of Single Friction Pendulum bearing for isolated buildings subjected to seismic actions in Vietnam

NASA Astrophysics Data System (ADS)

Nguyen, N. V.; Nguyen, C. H.; Hoang, H. P.; Huong, K. T.

2018-04-01

Using structural control technology in earthquake resistant design of buildings in Vietnam is very limited. In this paper, a performance evaluation of using Single Friction Pendulum (SFP) bearing for seismically isolated buildings with earthquake conditions in Vietnam is presented. A two-dimensional (2-D) model of the 5-storey building subjected to earthquakes is analyzed in time domain. Accordingly, the model is analyzed for 2 cases: with and without SFP bearing. The ground acceleration data is selected and scaled to suit the design acceleration in Hanoi followed by the Standard TCVN 9386:2012. It is shown that the seismically isolated buildings gets the performance objectives while achieving an 91% reduction in the base shear, a significant decrease in the inter-story drift and absolute acceleration of each story.

Multiobjective Optimization of Rocket Engine Pumps Using Evolutionary Algorithm

NASA Technical Reports Server (NTRS)

Oyama, Akira; Liou, Meng-Sing

2001-01-01

A design optimization method for turbopumps of cryogenic rocket engines has been developed. Multiobjective Evolutionary Algorithm (MOEA) is used for multiobjective pump design optimizations. Performances of design candidates are evaluated by using the meanline pump flow modeling method based on the Euler turbine equation coupled with empirical correlations for rotor efficiency. To demonstrate the feasibility of the present approach, a single stage centrifugal pump design and multistage pump design optimizations are presented. In both cases, the present method obtains very reasonable Pareto-optimal solutions that include some designs outperforming the original design in total head while reducing input power by one percent. Detailed observation of the design results also reveals some important design criteria for turbopumps in cryogenic rocket engines. These results demonstrate the feasibility of the EA-based design optimization method in this field.

Harnessing the hybrid power supply systems of utility grid and photovoltaic panels at retrofit residential single family building in Medan

NASA Astrophysics Data System (ADS)

Pangaribuan, A. B.; Rahmat, R. F.; Lidya, M. S.; Zálešák, M.

2017-01-01

The paper describes improvisation mode of energy supply source by collaboration between national utility grid as represented by fossil fuels and PV as independent renewable power resource in order to aim the energy consumptions efficiently in retrofit single family house. In this case, one existing single family house model in Medan, Indonesia was observed for the possibility of future refurbishment. The eco-design version of the house model and prediction analyses regarding nearby potential renewable energy resource (solar system) had been made using Autodesk Revit MEP 2015, Climate Consultant 6.0 and Green Building Studio Analysis. Economical evaluation of using hybrid power supply is discussed as well.

Novel posterior fixation keratoprosthesis

NASA Astrophysics Data System (ADS)

Lacombe, Emmanuel

1992-08-01

The keratoprosthesis is the last solution for corneally blind patients that cannot benefit from corneal transplants. Keratoprostheses that have been designed to be affixed anteriorly usually necessitate multi-step surgical procedures and are continuously subjected to the extrusion forces generated by the positive intraocular pressure; therefore, clinical results in patients prove inconsistent. We proposed a novel keratoprosthesis concept that utilizes posterior corneal fixation which `a priori' minimizes the risk of aqueous leakage and expulsion. This prosthesis is implanted in a single procedure thereby reducing the number of surgical complications normally associated with anterior fixation devices. In addition, its novel design makes this keratoprosthesis implantable in phakic eyes. With an average follow-up of 13 months (range 3 to 25 months), our results on 21 cases are encouraging. Half of the keratoprostheses were implanted in severe burn cases, with the remainder in cases of pseudo- pemphigus. Good visual results and cosmetic appearance were obtained in 14 of 21 eyes.

Full Envelope Reconfigurable Control Design for the X-33 Vehicle

NASA Technical Reports Server (NTRS)

Cotting, M. Christopher; Burken, John J.; Lee, Seung-Hee (Technical Monitor)

2001-01-01

In the event of a control surface failure, the purpose of a reconfigurable control system is to redistribute the control effort among the remaining working surfaces such that satisfactory stability and performance are retained. An Off-line Nonlinear General Constrained Optimization (ONCO) approach was used for the reconfigurable X-33 control design method. Three example failures are shown using a high fidelity 6 DOF simulation (case I ascent with a left body flap jammed at 25 deg.; case 2 entry with a right inboard elevon jam at 25 deg.; and case 3, landing (TAEM) with a left rudder jam at -30 deg.) Failure comparisons between responses with the nominal controller and reconfigurable controllers show the benefits of reconfiguration. Single jam aerosurface failures were considered, and failure detection and identification is considered accomplished in the actuator controller. The X-33 flight control system will incorporate reconfigurable flight control in the baseline system.

Preliminary Two-Phase Terry Turbine Nozzle Models for RCIC Off-Design Operation Conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Haihua; O'Brien, James

This report presents the effort to extend the single-phase analytical Terry turbine model to cover two-phase off-design conditions. The work includes: (1) adding well-established two-phase choking models – the Isentropic Homogenous Equilibrium Model (IHEM) and Moody’s model, and (2) theoretical development and implementation of a two-phase nozzle expansion model. The two choking models provide bounding cases for the two-phase choking mass flow rate. The new two-phase Terry turbine model uses the choking models to calculate the mass flow rate, the critical pressure at the nozzle throat, and steam quality. In the divergent stage, we only consider the vapor phase withmore » a similar model for the single-phase case by assuming that the liquid phase would slip along the wall with a much slower speed and will not contribute the impulse on the rotor. We also modify the stagnation conditions according to two-phase choking conditions at the throat and the cross-section areas for steam flow at the nozzle throat and at the nozzle exit. The new two-phase Terry turbine model was benchmarked with the same steam nozzle test as for the single-phase model. Better agreement with the experimental data is observed than from the single-phase model. We also repeated the Terry turbine nozzle benchmark work against the Sandia CFD simulation results with the two-phase model for the pure steam inlet nozzle case. The RCIC start-up tests were simulated and compared with the single-phase model. Similar results are obtained. Finally, we designed a new RCIC system test case to simulate the self-regulated Terry turbine behavior observed in Fukushima accidents. In this test, a period inlet condition for the steam quality varying from 1 to 0 is applied. For the high quality inlet period, the RCIC system behaves just like the normal operation condition with a high pump injection flow rate and a nominal steam release rate through the turbine, with the net addition of water to the primary system; for the low quality inlet period, the RCIC turbine shaft work dramatically decreases and results in a much reduced pump injection flow rate, and the mixture flow rate through the turbine increases due to the high liquid phase flow rate. The net effect for this period is net removal of coolant from the primary loop. With the periodic addition and removal of coolant to the primary loop, the self-regulation mode of the RCIC system can be maintained for a quite long time. Both the IHEM and Moody’s models generate similar phenomena; however noticeable differences can be observed.« less

The Application of Waiting Lines System in Improving Customer Service Management: The Examination of Malaysia Fast Food Restaurants Industry

NASA Astrophysics Data System (ADS)

Ismail, Zurina; Shokor, Shahrul Suhaimi AB

2016-03-01

Rapid life time change of the Malaysian lifestyle had served the overwhelming growth in the service operation industry. On that occasion, this paper will provide the idea to improve the waiting line system (WLS) practices in Malaysia fast food chains. The study will compare the results in between the single server single phase (SSSP) and the single server multi-phase (SSMP) which providing Markovian Queuing (MQ) to be used for analysis. The new system will improve the current WLS, plus intensifying the organization performance. This new WLS were designed and tested in a real case scenario and in order to develop and implemented the new styles, it need to be focusing on the average number of customers (ANC), average number of customer spending time waiting in line (ACS), and the average time customers spend in waiting and being served (ABS). We introduced new WLS design and there will be prompt discussion upon theories of benefits and potential issues that will benefit other researchers.

Using single-case experimental design methodology to evaluate the effects of the ABC method for nursing staff on verbal aggressive behaviour after acquired brain injury.

PubMed

Winkens, Ieke; Ponds, Rudolf; Pouwels, Climmy; Eilander, Henk; van Heugten, Caroline

2014-01-01

The ABC method is a basic and simplified form of behavioural modification therapy for use by nurses. ABC refers to the identification of Antecedent events, target Behaviours, and Consequent events. A single-case experimental AB design was used to evaluate the effects of the ABC method on a woman diagnosed with olivo-ponto-cerebellar ataxia. Target behaviour was verbal aggressive behaviour during ADL care, assessed at 9 time points immediately before implementation of the ABC method and at 36 time points after implementation. A randomisation test showed a significant treatment effect between the baseline and intervention phases (t = .58, p = .03; ES [Nonoverlap All Pairs] = .62). Visual analysis, however, showed that the target behaviour was still present after implementation of the method and that on some days the nurses even judged the behaviour to be more severe than at baseline. Although the target behaviour was still present after treatment, the ABC method seems to be a promising tool for decreasing problem behaviour in patients with acquired brain injury. It is worth investigating the effects of this method in future studies. When interpreting single-subject data, both visual inspection and statistical analysis are needed to determine whether treatment is effective and whether the effects lead to clinically desirable results.

Case study: design, operation, maintenance and water quality management of sustainable storm water ponds for roof runoff.

PubMed

Scholz, Miklas

2004-12-01

The purpose of this case study was to optimise design, operation and maintenance guidelines, and to assess the water treatment potential of a storm water pond system after 15 months of operation. The system was based on a combined silt trap, attenuation pond and vegetated infiltration basin. This combination was used as the basis for construction of a roof water runoff system from a single domestic property. United Kingdom Building Research Establishment and Construction Industry Research and Information Association, and German Association for Water, Wastewater and Waste design guidelines were tested. These design guidelines failed because they did not consider local conditions. The infiltration function for the infiltration basin was logarithmic. Algal control techniques were successfully applied, and treatment of rainwater runoff from roofs was found to be largely unnecessary for recycling (e.g., watering plants). However, seasonal and diurnal variations of biochemical oxygen demand, dissolved oxygen and pH were recorded.

Control Theory based Shape Design for the Incompressible Navier-Stokes Equations

NASA Astrophysics Data System (ADS)

Cowles, G.; Martinelli, L.

2003-12-01

A design method for shape optimization in incompressible turbulent viscous flow has been developed and validated for inverse design. The gradient information is determined using a control theory based algorithm. With such an approach, the cost of computing the gradient is negligible. An additional adjoint system must be solved which requires the cost of a single steady state flow solution. Thus, this method has an enormous advantage over traditional finite-difference based algorithms. The method of artificial compressibility is utilized to solve both the flow and adjoint systems. An algebraic turbulence model is used to compute the eddy viscosity. The method is validated using several inverse wing design test cases. In each case, the program must modify the shape of the initial wing such that its pressure distribution matches that of the target wing. Results are shown for the inversion of both finite thickness wings as well as zero thickness wings which can be considered a model of yacht sails.

Effectiveness of cognitive orientation to (daily) occupational performance (CO-OP) on children with cerebral palsy: A mixed design.

PubMed

Ghorbani, Neda; Rassafiani, Mehdi; Izadi-Najafabadi, Sara; Yazdani, Farzaneh; Akbarfahimi, Nazila; Havaei, Naser; Gharebaghy, Soraya

2017-12-01

Cerebral palsy (CP) is the most common cause of physical disabilities during childhood. Therapeutic interventions mainly focus on impairment reduction to address motor-based difficulties. In contrast, Cognitive Orientation to daily Occupational Performance (CO-OP) is a cognitive approach, providing intervention at the level of activity and participation. This study aims to determine whether the CO-OP approach improves motor skills and achievement in motor-based occupational performance goals in children with CP. In this mixed design research (i.e., a multiple baseline single case experimental design and a one-group pretest-posttest design), five children with CP participated in 12 CO-OP intervention sessions. Repeated measures of motor skills for the multiple baseline single case experimental design were taken using the Bruininks-Oseretsky Test of Motor Proficiency (BOTMP); pre- and post-measures of parent/child perception of performance and satisfaction were identified using the Canadian Occupational Performance Measure (COPM); level of achievement was identified using Goal Attainment Scaling (GAS). According to the BOTMP results, all children were able to engage in the CO-OP intervention to improve motor performance. Significant differences after treatment were found in both performance and performance satisfaction ratings using the COPM as rated by parents and children. The GAS results showed progress in achievement levels for all children; all goals were achieved or exceeded. CO-OP intervention can be helpful in improving motor skills and achieving self-identified, motor-based goals in children with CP. Copyright © 2017. Published by Elsevier Ltd.

Producing Websites for Assessment: A Case Study from a Level 1 Fieldwork Module

ERIC Educational Resources Information Center

France, Derek; Ribchester, Chris

2004-01-01

BSc Single Subject Geography students at University College Chester enrol for a core module that involves the acquisition of fieldwork data, data analysis and project design. One of this module's assessment exercises requires students to 'write up' a field-based research project as a functioning website. This paper explores the practicalities of…

A Meta-Analysis of Self-Monitoring on Reading Performance of K-12 Students

ERIC Educational Resources Information Center

Guzman, Guadalupe; Goldberg, Taryn S.; Swanson, H. Lee

2018-01-01

The published single-case design (SCD) research (N = 19 articles) on self-monitoring and reading performance was synthesized. The following inclusion criteria were used: (a) the study must have been peer-reviewed, (b) implemented an intervention targeting student self-monitoring of reading skills, (c) included data on at least 1 reading outcome,…

Increasing Social Behaviors in Young Children with Social-Communication Delays in a Group Arrangement in Preschool

ERIC Educational Resources Information Center

Lane, Justin D.; Gast, David L.; Ledford, Jennifer R.; Shepley, Collin

2017-01-01

Young children with disabilities are less likely to display age-appropriate social behaviors than same-age peers with typical social development, especially children who display social-communication delays. In this study, two concurrently operating single case designs were used to evaluate the use of progressive time delay (PTD) to teach children…

Abdominal Massage for the Treatment of Idiopathic Constipation in Children with Profound Learning Disabilities: A Single Case Study Design

ERIC Educational Resources Information Center

Moss, Lucy; Smith, Melanie; Wharton, Sarah; Hames, Annette

2008-01-01

Chronic constipation is a common problem in people with learning disabilities. Treatment often involves dietary changes or long-term laxative use. The participants were five children with profound learning disabilities and additional physical difficulties. Their long-standing idiopathic constipation was managed by laxatives. Intervention lasted up…

Using Art Media during Prewriting: Helping Students with Dysgraphia Manage Idea Generation before Encoding Text

ERIC Educational Resources Information Center

Dunn, Michael

2013-01-01

Many students struggle with writing skills. This study focuses on three students (second and fourth grades) who were classified with a learning disability by their school. These children had writing goals and objectives (i.e., characteristics of having dysgraphia) included in their Individual Education Plan. In a single case design format, each…

A Placebo Double-Blind Pilot Study of Dextromethorphan for Problematic Behaviors in Children with Autism

ERIC Educational Resources Information Center

Woodard, Cooper; Groden, June; Goodwin, Matthew; Bodfish, James

2007-01-01

We used a mixed group/single-case, double-blind, placebo-controlled, ABAB design to examine the safety and efficacy of the glutamate antagonist dextromethorphan for the treatment of problematic behaviors and core symptoms in eight children diagnosed with autism. All participants had increased levels of irritability at baseline as measured by the…

Critical Discourse Analysis of Business Academia on the Role and Status of the National Language

ERIC Educational Resources Information Center

Sikandar, Aliya

2017-01-01

This qualitative case study is an exploration of the phenomenon of the ways in which Urdu as the national language is represented in discursive practices of senior business academia. The research design, built on Fairclough's Critical Discourse Analysis (CDA) model (2009) is of dialectical-relational approach. The participant in this single case…

Identifying Empirically Supported Treatments for Pica in Individuals with Intellectual Disabilities

ERIC Educational Resources Information Center

Hagopian, Louis P.; Rooker, Griffin W.; Rolider, Natalie U.

2011-01-01

The purpose of the current study was to critically examine the existing literature on the treatment of pica displayed by individuals with intellectual disabilities. Criteria for empirically supported treatments as described by Divisions 12 and 16 of APA, and adapted for studies employing single-case designs were used to review this body of…

A Review of Teaching Sentence-Level Writing Skills to Students with Writing Difficulties and Learning Disabilities

ERIC Educational Resources Information Center

Datchuk, Shawn M.; Kubina, Richard M.

2013-01-01

Students with writing difficulties and learning disabilities struggle with many aspects of the writing process, including use of sentence-level skills. This literature review summarizes results from 19 published articles that used single-case or group-experimental and quasi-experimental designs to investigate effects of intervention on the…

Video Self-Modelling: An Intervention for Children with Behavioural Difficulties

ERIC Educational Resources Information Center

Regan, Helen; Howe, Julia

2017-01-01

There has recently been a growth in interest in the use of video technology in the practice of educational psychologists. This research explores the effects of a video self-modelling (VSM) intervention on the behaviours of a child in mainstream education using a single case study design set within a behaviourist paradigm. VSM is a behavioural…

Making the Case for Green Building: Cataloging the Benefits of Environmentally Responsible Design & Construction

ERIC Educational Resources Information Center

Wilson, Alex

2008-01-01

To those entrenched in the green building world, the benefits seem obvious. Why would anyone choose to build in a way that isn't comfortable, healthy, energy efficient, and environmentally responsible? Even within a single college or university project, different team members often have different reasons for promoting a green agenda. Architects…

A Systematic Review of Effects of Social Stories Interventions for Individuals with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Qi, Cathy H.; Barton, Erin E.; Collier, Margo; Lin, Yi-Ling; Montoya, Charisse

2018-01-01

The purpose of this systematic review was to synthesize 22 single-case research design (SCRD) studies on social stories intervention for individuals with autism spectrum disorder (ASD). We used the What Works Clearinghouse (WWC) SCRD standards to analyze study rigor and evidence of a causal relation. We calculated four nonoverlap indices to…

The Effects of Morpheme and Prosody Instruction on Middle School Spelling

ERIC Educational Resources Information Center

Dornay, Margaret A.

2017-01-01

A single case design was used to investigate the impact of two types of instruction on middle school students' spelling. Phase 1 emphasized morphology awareness instruction (MAI) and phase 2 employed the addition of prosody awareness instruction (PAI). In order to compare the effects of MAI and PAI, spelling scores were gathered from eight…

The Educational Validity and Utility of Single-Case Design Research in Building Evidence-Based Practices in Education

ERIC Educational Resources Information Center

Kourea, Lefki; Lo, Ya-yu

2016-01-01

Improving academic, behavioural, and social outcomes of students through empirical research has been a firm commitment among researchers, policy-makers, and other professionals in education across Europe and the United States (U.S.). To assist in building scientific evidences, executive bodies such as the European Commission and the Institute for…

Preliminary Study of the Effect of Incremental Rehearsal with a Morphological Component for Teaching Chinese Character Recognition

ERIC Educational Resources Information Center

Kwong, Elena; Burns, Matthew K.

2016-01-01

The current study examined the effectiveness of Incremental Rehearsal (IR) for teaching Chinese character recognition using a single-case experimental design. In addition, a morphological component was added to standard IR procedures (IRM) to take into account the role of morphological awareness in Chinese reading. Three kindergarten students in…

A Comparison of General and Content-Specific Literacy Strategies for Learning Science Content

ERIC Educational Resources Information Center

Reed, Deborah K.; Whalon, Kelly; Lynn, Devon; Miller, Nicole; Smith, Keely

2017-01-01

This study employed an adapted alternating treatments single-case design to explore students' learning of biology content when using a general note-taking (GNT) strategy and a content-specific graphic organizer (CGO) to support reading high school biology texts. The 4 focal participants were 15-18-year-olds committed to a moderate risk juvenile…

The Relationship between Online Students' Use of Services and Their Feelings of Mattering

ERIC Educational Resources Information Center

Hart, Tracy L.

2017-01-01

The purpose of this single case study was to examine the relationship between online students' use of support services and their feelings of mattering using a convergent parallel research design to collect quantitative and qualitative data. Students enrolled exclusively in online classes during the academic year 2015-2016 at the University of New…

eCoaching across Routines to Enhance Teachers' Use of Modeling

ERIC Educational Resources Information Center

Coogle, Christan Grygas; Rahn, Naomi L.; Ottley, Jennifer Riggie; Storie, Sloan

2016-01-01

The purpose of this research was to determine the impact of eCoaching on two special education teachers' use of modeling strategies across child-led, teacher-led, and mealtime routines. A multiple-probe, single-case design was used to determine the effects of eCoaching on teachers' use of three modeling strategies. Each of the three strategies…

Voices of Successful Science Teachers in an Urban Diverse Single Gender Girls' School

ERIC Educational Resources Information Center

Malhan, Jyoti

2016-01-01

This research study was conducted as a qualitative case study of four successful science teachers of female students in a diverse, title 1, urban, public girls' school. The study was designed to hear the 'muted' voices of successful science teachers concerning their beliefs and practices when they effectively provide learning opportunities for…

Bug-in-Ear eCoaching: Impacts on Novice Early Childhood Special Education Teachers

ERIC Educational Resources Information Center

Grygas Coogle, Christan; Ottley, Jennifer R.; Rahn, Naomi L.; Storie, Sloan

2018-01-01

A multiple-probe, single-case design was used to determine the effects of bug-in-ear eCoaching on teachers' use of two targeted naturalistic communication strategies and focus children's responses to these strategies. Results indicated that bug-in-ear eCoaching enhanced teachers' use of communication strategies and the appropriate responses of…

Supporting Early Childhood Educators' Use of Embedded Communication Strategies by Providing Feedback via Bug-in-Ear Technology

ERIC Educational Resources Information Center

Riggie, Jennifer

2013-01-01

The purpose of this study was to examine the relationship between coaching provided with bug-in-ear technology, the frequency of the early childhood educators' use of targeted communication strategies and children's expressive communication. Four multiple-baseline single-case design experiments were completed to evaluate these relationships.…

Video-Based Intervention in Teaching Fraction Problem-Solving to Students with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Yakubova, Gulnoza; Hughes, Elizabeth M.; Hornberger, Erin

2015-01-01

The purpose of this study was to determine the effectiveness of a point-of-view video modeling intervention to teach mathematics problem-solving when working on word problems involving subtracting mixed fractions with uncommon denominators. Using a multiple-probe across students design of single-case methodology, three high school students with…

Learning with Technology: Video Modeling with Concrete-Representational-Abstract Sequencing for Students with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Yakubova, Gulnoza; Hughes, Elizabeth M.; Shinaberry, Megan

2016-01-01

The purpose of this study was to determine the effectiveness of a video modeling intervention with concrete-representational-abstract instructional sequence in teaching mathematics concepts to students with autism spectrum disorder (ASD). A multiple baseline across skills design of single-case experimental methodology was used to determine the…

Investigation of the Regioselectivity of Alkene Hydrations for the Undergraduate Organic Laboratory

ERIC Educational Resources Information Center

Bichler, Katherine A.; Van Ornum, Scott G.; Franz, Margaret C.; Imhoff, Andrea M.

2015-01-01

Due to a lack of time and, thus, an inability to present every possibility in a chemical reaction, organic chemistry professors tend to present each reaction with a single outcome. In practice, this is clearly not the case. A first-semester, three-week laboratory experiment designed for undergraduate organic chemistry students is described in…

Use of an E-Reader as a Compensatory Strategy among University Students with Reading Disabilities

ERIC Educational Resources Information Center

Tanners, Adam

2010-01-01

This study investigated the impact of a Kindle e-book reader on the reading rate, comprehension and e-reader acceptance of five postsecondary students with reading disabilities. A single-case Alternating Treatments Design was employed to measure reading rates and reading comprehension. Students were exposed to a series of controlled reading…

A Visual Diary of an Anorexic Woman: Development of a Hopeful Self-Healer Identity.

ERIC Educational Resources Information Center

Boisvert, Jennifer A.

2003-01-01

Chronicles an anorexic woman's exploration of her experience of hope in recovery. A single-participant design using heuristic case study and photography was used. Content and thematic analyses of photos and journal entries led to the emergence of four themes. Implications for clinical training, research, and practice regarding the benefits of…

The Effects of Audiotaped Progressive Muscle Relaxation Training on the Reading Performance of Emotionally Disturbed Adolescents.

ERIC Educational Resources Information Center

Margolis, Howard; Pica, Louis, Jr.

A study examined the degree to which audiotaped progressive muscle relaxation training influenced the oral and silent reading performance of eight adolescents who were legally classified as emotionally disturbed. A single-case ABAB withdrawal design was used to examine the effects of relaxation training on oral reading. In addition, a…

Efficacy of Cognitive-Behavioral Therapy for Comorbid Panic Disorder with Agoraphobia and Generalized Anxiety Disorder

ERIC Educational Resources Information Center

Labrecque, Joane; Marchand, Andre; Dugas, Michel J.; Letarte, Andree

2007-01-01

The goal of this study was to evaluate the efficacy of cognitive-behavioral therapy for comorbid panic disorder with agoraphobia (PDA) and generalized anxiety disorder (GAD) by combining treatment strategies for both disorders. A single-case, multiple-baseline design across participants was used. Three participants with primary PDA and secondary…

Cognitive-Behavioral Therapy for Comorbid Generalized Anxiety Disorder and Panic Disorder with Agoraphobia

ERIC Educational Resources Information Center

Labrecque, Joane; Dugas, Michel J.; Marchand, Andre; Letarte, Andree

2006-01-01

The goal of this study was to evaluate the efficacy of a cognitive-behavioral treatment package for comorbid generalized anxiety disorder (GAD) and panic disorder with agoraphobia (PDA). A single-case, multiple-baseline, across-subjects design was used with 3 primary GAD patients with secondary PDA. The efficacy of the treatment was evaluated with…

Exploring Higher Education's Response to the Early Childhood Education Teacher Shortage

ERIC Educational Resources Information Center

Matczak, Melissa L.

2017-01-01

This qualitative single case study attempt is to explore how one institution of higher education can be responsive in meeting the needs of a teacher shortage in early childhood education and the factors impacting (hindering and helping) the collaborative partner process of designing an Applied Bachelor's in Science Degree in Elementary Education…

Learning and Growing: Trust, Leadership, and Response to Crisis

ERIC Educational Resources Information Center

Sutherland, Ian E.

2017-01-01

Purpose: The purpose of this paper is to explore the nature of trust in a school community related to the leadership response to crisis. Design/Methodology/Approach: This study was a multiple-source qualitative study of a single case of a PreK-12 international school called The Learning School. Findings: The findings revealed the nature of how…

Implementing a Social-Ecological Model of Health in Wales

ERIC Educational Resources Information Center

Rothwell, Heather; Shepherd, Michael; Murphy, Simon; Burgess, Stephen; Townsend, Nick; Pimm, Claire

2010-01-01

Purpose: The purpose of this paper is to assess the implementation of the Welsh Network of Healthy School Schemes (WNHSS) at national, local and school levels, using a systems approach drawing on the Ottawa Charter. Design/methodology/approach: The approach takes the form of a single-case study using data from a documentary analysis, interviews…

eCoaching to Enhance Special Educator Practice and Child Outcomes

ERIC Educational Resources Information Center

Coogle, Christan Grygas; Ottley, Jennifer R.; Storie, Sloan; Rahn, Naomi L.; Burt, Amy Kurowski

2017-01-01

Research suggests that there is a gap in what we know is best practice and what is taking place in inclusive early childhood classrooms for children identified with autism spectrum disorder. The purpose of this single-case design study was to examine the effect of eCoaching on (a) a preschool special educator's use of embedded learning…

Functional Technology for Individuals with Intellectual Disabilities: Meta-Analysis of Mobile Device-Based Interventions

ERIC Educational Resources Information Center

Kim, Jemma; Kimm, Christina H.

2017-01-01

This study employs a meta-analysis of single-subject design research to investigate the efficacy of mobile device-based interventions for individuals with intellectual disabilities (ID) and to further examine possible variables that may moderate the intervention outcomes. A total of 23 studies, 78 participants, and 140 observed cases that met the…

Single-Case Experimental Designs in Educational Research: A Methodology for Causal Analyses in Teaching and Learning

ERIC Educational Resources Information Center

Plavnick, Joshua B.; Ferreri, Summer J.

2013-01-01

Current legislation requires educational practices be informed by science. The effort to establish educational practices supported by science has, to date, emphasized experiments with large numbers of participants who are randomly assigned to an intervention or control condition. A potential limitation of such an emphasis at the expense of other…

Demonstration of Multi- and Single-Reader Sample Size Program for Diagnostic Studies software.

PubMed

Hillis, Stephen L; Schartz, Kevin M

2015-02-01

The recently released software Multi- and Single-Reader Sample Size Sample Size Program for Diagnostic Studies , written by Kevin Schartz and Stephen Hillis, performs sample size computations for diagnostic reader-performance studies. The program computes the sample size needed to detect a specified difference in a reader performance measure between two modalities, when using the analysis methods initially proposed by Dorfman, Berbaum, and Metz (DBM) and Obuchowski and Rockette (OR), and later unified and improved by Hillis and colleagues. A commonly used reader performance measure is the area under the receiver-operating-characteristic curve. The program can be used with typical common reader-performance measures which can be estimated parametrically or nonparametrically. The program has an easy-to-use step-by-step intuitive interface that walks the user through the entry of the needed information. Features of the software include the following: (1) choice of several study designs; (2) choice of inputs obtained from either OR or DBM analyses; (3) choice of three different inference situations: both readers and cases random, readers fixed and cases random, and readers random and cases fixed; (4) choice of two types of hypotheses: equivalence or noninferiority; (6) choice of two output formats: power for specified case and reader sample sizes, or a listing of case-reader combinations that provide a specified power; (7) choice of single or multi-reader analyses; and (8) functionality in Windows, Mac OS, and Linux.

Deformation Analysis of the Main Components in a Single Screw Compressor

NASA Astrophysics Data System (ADS)

Liu, Feilong; Liao, Xueli; Feng, Quanke; Van Den Broek, Martijn; De Paepe, Michel

2015-08-01

The single screw compressor is used in many fields such as air compression, chemical industry and refrigeration. During operation, different gas pressures and temperatures applied on the components can cause different degrees of deformation, which leads to a difference between the thermally induced clearance and the designed clearance. However, limited research about clearance design is reported. In this paper, a temperature measurement instrument and a convective heat transfer model were described and used to establish the temperature of a single screw air compressor's casing, screw rotor and star wheel. 3-D models of these three main components were built. The gas force deformation, thermal- structure deformation and thermal-force coupling deformation were carried out by using a finite element simulation method. Results show that the clearance between the bottom of the groove and the top of star wheel is reduced by 0.066 mm, the clearance between the side of groove and the star wheel is reduced by 0.015 mm, and the clearance between the cylinder and the rotor is reduced by 0.01 mm. It is suggested that these deformations should be taken into account during the design of these clearances.

Dissociation between facial and bodily expressions in emotion recognition: A case study.

PubMed

Leiva, Samanta; Margulis, Laura; Micciulli, Andrea; Ferreres, Aldo

2017-12-21

Existing single-case studies have reported deficit in recognizing basic emotions through facial expression and unaffected performance with body expressions, but not the opposite pattern. The aim of this paper is to present a case study with impaired emotion recognition through body expressions and intact performance with facial expressions. In this single-case study we assessed a 30-year-old patient with autism spectrum disorder, without intellectual disability, and a healthy control group (n = 30) with four tasks of basic and complex emotion recognition through face and body movements, and two non-emotional control tasks. To analyze the dissociation between facial and body expressions, we used Crawford and Garthwaite's operational criteria, and we compared the patient and the control group performance with a modified one-tailed t-test designed specifically for single-case studies. There were no statistically significant differences between the patient's and the control group's performances on the non-emotional body movement task or the facial perception task. For both kinds of emotions (basic and complex) when the patient's performance was compared to the control group's, statistically significant differences were only observed for the recognition of body expressions. There were no significant differences between the patient's and the control group's correct answers for emotional facial stimuli. Our results showed a profile of impaired emotion recognition through body expressions and intact performance with facial expressions. This is the first case study that describes the existence of this kind of dissociation pattern between facial and body expressions of basic and complex emotions.

Design and 4D Printing of Cross-Folded Origami Structures: A Preliminary Investigation

PubMed Central

Teoh, Joanne Ee Mei; Feng, Xiaofan; Zhao, Yue; Liu, Yong

2018-01-01

In 4D printing research, different types of complex structure folding and unfolding have been investigated. However, research on cross-folding of origami structures (defined as a folding structure with at least two overlapping folds) has not been reported. This research focuses on the investigation of cross-folding structures using multi-material components along different axes and different horizontal hinge thickness with single homogeneous material. Tensile tests were conducted to determine the impact of multi-material components and horizontal hinge thickness. In the case of multi-material structures, the hybrid material composition has a significant impact on the overall maximum strain and Young’s modulus properties. In the case of single material structures, the shape recovery speed is inversely proportional to the horizontal hinge thickness, while the flexural or bending strength is proportional to the horizontal hinge thickness. A hinge with a thickness of 0.5 mm could be folded three times prior to fracture whilst a hinge with a thickness of 0.3 mm could be folded only once prior to fracture. A hinge with a thickness of 0.1 mm could not even be folded without cracking. The introduction of a physical hole in the center of the folding/unfolding line provided stress relief and prevented fracture. A complex flower petal shape was used to successfully demonstrate the implementation of overlapping and non-overlapping folding lines using both single material segments and multi-material segments. Design guidelines for establishing cross-folding structures using multi-material components along different axes and different horizontal hinge thicknesses with single or homogeneous material were established. These guidelines can be used to design and implement complex origami structures with overlapping and non-overlapping folding lines. Combined overlapping folding structures could be implemented and allocating specific hole locations in the overall designs could be further explored. In addition, creating a more precise prediction by investigating sets of in between hinge thicknesses and comparing the folding times before fracture, will be the subject of future work. PMID:29510503

Simulation of Synthetic Jets in Quiescent Air Using Unsteady Reynolds Averaged Navier-Stokes Equations

NASA Technical Reports Server (NTRS)

Vatsa, Veer N.; Turkel, Eli

2006-01-01

We apply an unsteady Reynolds-averaged Navier-Stokes (URANS) solver for the simulation of a synthetic jet created by a single diaphragm piezoelectric actuator in quiescent air. This configuration was designated as Case 1 for the CFDVAL2004 workshop held at Williamsburg, Virginia, in March 2004. Time-averaged and instantaneous data for this case were obtained at NASA Langley Research Center, using multiple measurement techniques. Computational results for this case using one-equation Spalart-Allmaras and two-equation Menter's turbulence models are presented along with the experimental data. The effect of grid refinement, preconditioning and time-step variation are also examined in this paper.

A Novel Multilevel DC - AC Converter from Green Energy Power Generators Using Step-Square Waving and PWM Technique

NASA Astrophysics Data System (ADS)

Fajingbesi, F. E.; Midi, N. S.; Khan, S.

2017-06-01

Green energy sources or renewable energy system generally utilize modular approach in their design. This sort of power sources are generally in DC form or in single cases AC. Due to high fluctuation in the natural origin of this energy (wind & solar) source they are stored as DC. DC power however are difficult to transfer over long distances hence DC to AC converters and storage system are very important in green energy system design. In this work we have designed a novel multilevel DC to AC converter that takes into account the modular design of green energy systems. A power conversion efficiency of 99% with reduced total harmonic distortion (THD) was recorded from our simulated system design.

AESOP: An interactive computer program for the design of linear quadratic regulators and Kalman filters

NASA Technical Reports Server (NTRS)

Lehtinen, B.; Geyser, L. C.

1984-01-01

AESOP is a computer program for use in designing feedback controls and state estimators for linear multivariable systems. AESOP is meant to be used in an interactive manner. Each design task that the program performs is assigned a "function" number. The user accesses these functions either (1) by inputting a list of desired function numbers or (2) by inputting a single function number. In the latter case the choice of the function will in general depend on the results obtained by the previously executed function. The most important of the AESOP functions are those that design,linear quadratic regulators and Kalman filters. The user interacts with the program when using these design functions by inputting design weighting parameters and by viewing graphic displays of designed system responses. Supporting functions are provided that obtain system transient and frequency responses, transfer functions, and covariance matrices. The program can also compute open-loop system information such as stability (eigenvalues), eigenvectors, controllability, and observability. The program is written in ANSI-66 FORTRAN for use on an IBM 3033 using TSS 370. Descriptions of all subroutines and results of two test cases are included in the appendixes.

Thermal Modeling of the Injection of Standard and Thermally Insulated Cored Wire

NASA Astrophysics Data System (ADS)

Castro-Cedeno, E.-I.; Jardy, A.; Carré, A.; Gerardin, S.; Bellot, J. P.

2017-12-01

Cored wire injection is a widespread method used to perform alloying additions during ferrous and non-ferrous liquid metal treatment. The wire consists of a metal casing that is tightly wrapped around a core of material; the casing delays the release of the material as the wire is immersed into the melt. This method of addition presents advantages such as higher repeatability and yield of cored material with respect to bulk additions. Experimental and numerical work has been performed by several authors on the subject of alloy additions, spherical and cylindrical geometries being mainly considered. Surprisingly this has not been the case for cored wire, where the reported experimental or numerical studies are scarce. This work presents a 1-D finite volume numerical model aimed for the simulation of the thermal phenomena which occurs when the wire is injected into a liquid metal bath. It is currently being used as a design tool for the conception of new types of cored wire. A parametric study on the effect of injection velocity and steel casing thickness for an Al cored wire immersed into a steel melt at 1863 K (1590 °C) is presented. The standard single casing wire is further compared against a wire with multiple casings. Numerical results show that over a certain range of injection velocities, the core contents' release is delayed in the multiple casing when compared to a single casing wire.

Establishing Computer-Assisted Instruction to Teach Academics to Students with Autism as an Evidence-Based Practice.

PubMed

Root, Jenny R; Stevenson, Bradley S; Davis, Luann Ley; Geddes-Hall, Jennifer; Test, David W

2017-02-01

Computer-assisted instruction (CAI) is growing in popularity and has demonstrated positive effects for students with disabilities, including those with autism spectrum disorder (ASD). In this review, criteria for group experimental and single case studies were used to determine quality (Horner et al., Exceptional Children 71:165-179, 2005; Gersten et al., Exceptional Children 71:149-164, 2005; National Technical Assistance Center on Transition Center 2015). Included studies of high and adequate quality were further analyzed in terms of content, context, and specific instructional practices. Based on the NTACT criteria, this systematic review has established CAI as an evidence-based practice for teaching academics to students with ASD with support from 10 single-case and two group design studies of high or adequate quality. Suggestions for future research and implications for practice are discussed.

Reliability, Validity, and Usability of Data Extraction Programs for Single-Case Research Designs.

PubMed

Moeyaert, Mariola; Maggin, Daniel; Verkuilen, Jay

2016-11-01

Single-case experimental designs (SCEDs) have been increasingly used in recent years to inform the development and validation of effective interventions in the behavioral sciences. An important aspect of this work has been the extension of meta-analytic and other statistical innovations to SCED data. Standard practice within SCED methods is to display data graphically, which requires subsequent users to extract the data, either manually or using data extraction programs. Previous research has examined issues of reliability and validity of data extraction programs in the past, but typically at an aggregate level. Little is known, however, about the coding of individual data points. We focused on four different software programs that can be used for this purpose (i.e., Ungraph, DataThief, WebPlotDigitizer, and XYit), and examined the reliability of numeric coding, the validity compared with real data, and overall program usability. This study indicates that the reliability and validity of the retrieved data are independent of the specific software program, but are dependent on the individual single-case study graphs. Differences were found in program usability in terms of user friendliness, data retrieval time, and license costs. Ungraph and WebPlotDigitizer received the highest usability scores. DataThief was perceived as unacceptable and the time needed to retrieve the data was double that of the other three programs. WebPlotDigitizer was the only program free to use. As a consequence, WebPlotDigitizer turned out to be the best option in terms of usability, time to retrieve the data, and costs, although the usability scores of Ungraph were also strong. © The Author(s) 2016.

Integrated layout based Monte-Carlo simulation for design arc optimization

NASA Astrophysics Data System (ADS)

Shao, Dongbing; Clevenger, Larry; Zhuang, Lei; Liebmann, Lars; Wong, Robert; Culp, James

2016-03-01

Design rules are created considering a wafer fail mechanism with the relevant design levels under various design cases, and the values are set to cover the worst scenario. Because of the simplification and generalization, design rule hinders, rather than helps, dense device scaling. As an example, SRAM designs always need extensive ground rule waivers. Furthermore, dense design also often involves "design arc", a collection of design rules, the sum of which equals critical pitch defined by technology. In design arc, a single rule change can lead to chain reaction of other rule violations. In this talk we present a methodology using Layout Based Monte-Carlo Simulation (LBMCS) with integrated multiple ground rule checks. We apply this methodology on SRAM word line contact, and the result is a layout that has balanced wafer fail risks based on Process Assumptions (PAs). This work was performed at the IBM Microelectronics Div, Semiconductor Research and Development Center, Hopewell Junction, NY 12533

Treatment of Obsessive Compulsive Disorder and Excessive Reassurance Seeking in an Older Adult: A Single Case Quasi-Experimental Design.

PubMed

Halldorsson, Brynjar; Salkovskis, Paul M

2017-11-01

Cognitive behavioural interventions for excessive reassurance seeking (ERS) typically focus on encouraging individuals to refrain from seeking any reassurance and in some cases banning caregivers (e.g. family members) from providing it. However, this blanket consideration that reassurance is a bad thing that should simply be stopped may not always be appropriate or helpful. Cognitive behavioural treatment (CBT) targeting ERS by helping the sufferer to shift from seeking reassurance to seeking support may be a promising treatment intervention. This study aims to examine the targeted treatment of ERS in an older adult who has been suffering from severe obsessive compulsive disorder (OCD) for seven decades. Using a single case quasi-experimental design (ABCD), the frequency of reassurance seeking, urges to seek reassurance, OCD beliefs and anxiety were measured daily for almost a year in addition to standard symptom measures. At the end of treatment, visual inspection showed that reassurance seeking was no longer considered excessive and OCD severity fell from the severe to non-clinical range across the treatment sessions. All treatment gains were maintained at follow-up. This study illustrates how CBT can be successfully applied to treat long-standing OCD and ERS in an older adult. Engendering support as an alternative to reassurance seeking in CBT may be a particularly promising intervention for ERS.

Elective gastropexy with a reusable single-incision laparoscopic surgery port in dogs: 14 cases (2012-2013).

PubMed

Stiles, Mandy; Case, J Brad; Coisman, James

2016-08-01

OBJECTIVE To describe the technique, clinical findings, and short-term outcome in dogs undergoing laparoscopic-assisted incisional gastropexy with a reusable single-incision surgery port. DESIGN Retrospective case series. ANIMALS 14 client-owned dogs. PROCEDURES Medical records of dogs referred for elective laparoscopic gastropexy between June 2012 and August 2013 were reviewed. History, signalment, results of physical examination and preoperative laboratory testing, surgical procedure, duration of surgery, postoperative complications, duration of hospital stay, and short-term outcome were recorded. All patients underwent general anesthesia and were positioned in dorsal recumbency. After an initial limited laparoscopic exploration, single-incision laparoscopic-assisted gastropexy was performed extracorporeally in all dogs via a conical port placed in a right paramedian location. Concurrent procedures included laparoscopic ovariectomy (n = 4), gastric biopsy (2), and castration (7). Short-term outcome was evaluated. RESULTS Median duration of surgery was 76 minutes (range, 40 to 90 minutes). Intraoperative complications were minor and consisted of loss of pneumoperitoneum in 2 of 14 dogs. A postoperative surgical site infection occurred in 1 dog and resolved with standard treatment. Median duration of follow-up was 371 days (range, 2 weeks to 1.5 years). No dogs developed gastric dilation-volvulus during the follow-up period, and all owners were satisfied with the outcome. CONCLUSIONS AND CLINICAL RELEVANCE Results suggested that single-incision laparoscopic-assisted gastropexy with a reusable conical port was feasible and effective in appropriately selected cases. Investigation of the potential benefits of this reusable port versus single-use devices for elective gastropexy in dogs is warranted.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kraus, A.; Garner, P.; Hanan, N.

Thermal-hydraulic simulations have been performed using computational fluid dynamics (CFD) for the highly-enriched uranium (HEU) design of the IVG.1M reactor at the Institute of Atomic Energy (IAE) at the National Nuclear Center (NNC) in the Republic of Kazakhstan. Steady-state simulations were performed for both types of fuel assembly (FA), i.e. the FA in rows 1 & 2 and the FA in row 3, as well as for single pins in those FA (600 mm and 800 mm pins). Both single pin calculations and bundle sectors have been simulated for the most conservative operating conditions corresponding to the 10 MW outputmore » power, which corresponds to a pin unit cell Reynolds number of only about 7500. Simulations were performed using the commercial code STAR-CCM+ for the actual twisted pin geometry as well as a straight-pin approximation. Various Reynolds-Averaged Navier-Stokes (RANS) turbulence models gave different results, and so some validation runs with a higher-fidelity Large Eddy Simulation (LES) code were performed given the lack of experimental data. These singled out the Realizable Two-Layer k-ε as the most accurate turbulence model for estimating surface temperature. Single-pin results for the twisted case, based on the average flow rate per pin and peak pin power, were conservative for peak clad surface temperature compared to the bundle results. Also the straight-pin calculations were conservative as compared to the twisted pin simulations, as expected, but the single-pin straight case was not always conservative with regard to the straight-pin bundle. This was due to the straight-pin temperature distribution being strongly influenced by the pin orientation, particularly near the outer boundary. The straight-pin case also predicted the peak temperature to be in a different location than the twisted-pin case. This is a limitation of the straight-pin approach. The peak temperature pin was in a different location from the peak power pin in every case simulated, and occurred at an inner pin just before the enrichment change. The 600 mm case demonstrated a peak clad surface temperature of 370.4 K, while the 800 mm case had a temperature of 391.6 K. These temperatures are well below the necessary temperatures for boiling to occur at the rated pressure. Fuel temperatures are also well below the melting point. Future bundle work will include simulations of the proposed low-enriched uranium (LEU) design. Two transient scenarios were also investigated for the single-pin geometries. Both were “model” problems that were focused on pure thermal-hydraulic behavior, and as such were simple power changes that did not incorporate neutron kinetics modeling. The first scenario was a high-power, ramp increase, while the second scenario was a low-power, step increase. A cylindrical RELAP model was also constructed to investigate its accuracy as compared to the higher-fidelity CFD. Comparisons between the two codes showed good agreement for peak temperatures in the fuel and at the cladding surface for both cases. In the step transient, temperatures at four axial levels were also computed. These showed greater but reasonable discrepancy, with RELAP outputting higher temperatures. These results provide some evidence that RELAP can be used with confidence in modeling transients for IVG.« less

Electronic delay ignition module for single bridgewire Apollo standard initiator

NASA Technical Reports Server (NTRS)

Ward, R. D.

1975-01-01

An engineering model and a qualification model of the EDIM were constructed and tested to Scout flight qualification criteria. The qualification model incorporated design improvements resulting from the engineering model tests. Compatibility with single bridgewire Apollo standard initiator (SBASI) was proven by test firing forty-five (45) SBASI's with worst case voltage and temperature conditions. The EDIM was successfully qualified for Scout flight application with no failures during testing of the qualification unit. Included is a method of implementing the EDIM into Scout vehicle hardware and the ground support equipment necessary to check out the system.

Two-screen single-shot electron spectrometer for laser wakefield accelerated electron beams.

PubMed

Soloviev, A A; Starodubtsev, M V; Burdonov, K F; Kostyukov, I Yu; Nerush, E N; Shaykin, A A; Khazanov, E A

2011-04-01

The laser wakefield acceleration electron beams can essentially deviate from the axis of the system, which distinguishes them greatly from beams of conventional accelerators. In case of energy measurements by means of a permanent-magnet electron spectrometer, the deviation angle can affect accuracy, especially for high energies. A two-screen single-shot electron spectrometer that correctly allows for variations of the angle of entry is considered. The spectrometer design enables enhancing accuracy of measuring narrow electron beams significantly as compared to a one-screen spectrometer with analogous magnetic field, size, and angular acceptance. © 2011 American Institute of Physics

Design Multi-Sides System Unmanned Surface Vehicle (USV) Rocket

NASA Astrophysics Data System (ADS)

Syam, Rafiudin; Sutresman, Onny; Mappaita, Abdullah; Amiruddin; Wiranata, Ardi

2018-02-01

This study aims to design and test USV multislide forms. This system is excellent for maneuvering on the x-y-z coordinates. The disadvantage of a single side USV is that it is very difficult to maneuver to achieve very dynamic targets. While for multi sides system easily maneuvered though x-y-z coordinates. In addition to security defense purposes, multi-side system is also good for maritime intelligence, surveillance. In this case, electric deducted fan with Multi-Side system so that the vehicle can still operate even in reverse condition. Multipleside USV experiments have done with good results. In a USV study designed to use two propulsions.

Single-mode laser studies: Design and performance of a fixed-wave length source and coupling of lasers to thin-film optical waveguides

NASA Technical Reports Server (NTRS)

Ladany, I.; Hammer, J. M.

1980-01-01

A module developed for the generation of a stable single wavelength to be used for a fiber optic multiplexing scheme is described. The laser is driven with RZ pulses, and the temperature is stabilized thermoelectrically. The unit is capable of maintaining a fixed wavelength within about 6 A as the pulse duty cycle is changed between 0 and 100 percent. This is considered the most severe case, and much tighter tolerances are obtainable for constant input power coding schemes. Using a constricted double heterostructure laser, a wavelength shift of 0.083 A mA is obtained due to laser self-heating by a dc driving current. The thermoelectric unit is capable of maintaining a constant laser heat-sink temperature within 0.02 C. In addition, miniature lenses and couplers are described which allow efficient coupling of single wavelength modes of junction lasers to thin film optical waveguides. The design of the miniature cylinder lenses and the prism coupling techniques allow 2 mW of single wavelength mode junction laser light to b coupled into thin film waveguides using compact assemblies. Selective grating couplers are also studied.

Design of a Modular E-Core Flux Concentrating Axial Flux Machine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husain, Tausif; Sozer, Yilmaz; Husain, Iqbal

2015-09-02

In this paper a novel E-Core axial flux machine is proposed. The machine has a double stator-single rotor configuration with flux concentrating ferrite magnets, and pole windings across each leg of an E-Core stator. E-Core stators with the proposed flux-concentrating rotor arrangement result in better magnet utilization and higher torque density. The machine also has a modular structure facilitating simpler construction. This paper presents a single phase and a three-phase version of the E-Core machine. Case study for a 1.1 kW, 400 rpm machine for both the single phase and three-phase axial flux machine is presented. The results are verifiedmore » through 3D finite element analysis.« less

JETSPIN: A specific-purpose open-source software for simulations of nanofiber electrospinning

NASA Astrophysics Data System (ADS)

Lauricella, Marco; Pontrelli, Giuseppe; Coluzza, Ivan; Pisignano, Dario; Succi, Sauro

2015-12-01

We present the open-source computer program JETSPIN, specifically designed to simulate the electrospinning process of nanofibers. Its capabilities are shown with proper reference to the underlying model, as well as a description of the relevant input variables and associated test-case simulations. The various interactions included in the electrospinning model implemented in JETSPIN are discussed in detail. The code is designed to exploit different computational architectures, from single to parallel processor workstations. This paper provides an overview of JETSPIN, focusing primarily on its structure, parallel implementations, functionality, performance, and availability.

Nonimaging secondary concentrators for large rim angle parabolic troughs with tubular absorbers.

PubMed

Ries, H; Spirkl, W

1996-05-01

For parabolic trough solar collectors with tubular absorbers, we design new tailored secondary concentrators. The design is applicable for any rim angle of a parabolic reflector. With the secondary, the concentration can be increased by a factor of more than 2 with a compact secondary reflector consisting of a single piece, even for the important case of a rim angle of 90 deg. The parabolic reflector can be used without changes; the reduced absorber is still tubular but smaller than the original absorber and slightly displaced toward the primary.

Configuration study for a 30 GHz monolithic receive array, volume 1

NASA Technical Reports Server (NTRS)

Nester, W. H.; Cleaveland, B.; Edward, B.; Gotkis, S.; Hesserbacker, G.; Loh, J.; Mitchell, B.

1984-01-01

Gregorian, Cassegrain, and single reflector systems were analyzed in configuration studies for communications satellite receive antennas. Parametric design and performance curves were generated. A preliminary design of each reflector/feed system was derived including radiating elements, beam-former network, beamsteering system, and MMIC module architecture. Performance estimates and component requirements were developed for each design. A recommended design was selected for both the scanning beam and the fixed beam case. Detailed design and performance analysis results are presented for the selected Cassegrain configurations. The final design point is characterized in detail and performance measures evaluated in terms of gain, sidelobe level, noise figure, carrier-to-interference ratio, prime power, and beamsteering. The effects of mutual coupling and excitation errors (including phase and amplitude quantization errors) are evaluated. Mechanical assembly drawings are given for the final design point. Thermal design requirements are addressed in the mechanical design.

The Hedwig van Ameringen Executive Leadership in Academic MedicineRTM Program for Women: An Explanatory Study Regarding Its Development and Persistence

ERIC Educational Resources Information Center

Mensel, Ruth

2010-01-01

This study was designed to determine which factors contributed to the development and persistence of a women's leadership development program in higher education. The "Hedwig van Ameringen" Executive Leadership in Academic Medicine[R] "Program for Women" was the basis for this single-case study. To speculate about ELAM's development and…

Current Perspectives on Interventions for Self-Injurious Behavior of Children with Autism Spectrum Disorder: A Systematic Review of the Literature

ERIC Educational Resources Information Center

Chezan, Laura C.; Gable, Robert A.; McWhorter, Gabriela Z.; White, Sherita D.

2017-01-01

Our purpose in this systematic review was to identify, evaluate, and summarize the single-case research design studies examining behavioral interventions to address self-injurious behavior for young children with autism spectrum disorder. We identified 24 studies published between 2000 and 2016 that met the inclusion criteria. We reviewed and…

The Effects of a Peer-Mediated Reading Intervention on Juvenile Offenders' Main Idea Statements about Informational Text

ERIC Educational Resources Information Center

Wexler, Jade; Reed, Deborah K.; Barton, Erin E.; Mitchell, Marisa; Clancy, Erin

2018-01-01

Many youth in the juvenile justice system with or at risk for emotional and behavioral disorders struggle with reading. A multiple-baseline-across-participants single-case research design was used to examine the relationship between a supplemental peer-mediated reading intervention and juvenile offenders' generation of main idea statements about…

The Effects of Fading a Strategic Self-Monitoring Intervention on Students' Academic Engagement, Accuracy, and Productivity

ERIC Educational Resources Information Center

Rock, Marcia L.; Thead, Beth K.

2007-01-01

In this study, using a single-case multiple-treatment reversal (A-B-A-B-C) research design, we replicated and extended previous strategic self-monitoring research by teaching five students, with and without disabilities, to use ACT-REACT to increase their academic engagement, productivity, and accuracy across new and previously learned math…

"To Sleep, Perchance to Dream": The Role of Sleep Disturbance in the Multidimensional Treatment of a Male Bulimic.

ERIC Educational Resources Information Center

Rybicki, Daniel J.; Levitt, John

Eating disorders within males are relatively uncommon, with estimates suggesting incidence rates of only five percent of the sample. This single-subject, reversal design case study examines the etiological variables of a 22-year-old male bulimic patient. Consultation for treatment was made by the patient's parents. Family assessment made in the…

Effectiveness of Video Self-Modeling to Promote Social Initiations by 3-Year-Olds with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Buggey, Tom

2012-01-01

Video Self-Modeling (VSM) provides individuals the opportunity to view themselves performing a task beyond their present functioning level through the careful editing of videos. In this study, a single-case multiple-baseline design was used to determine whether VSM would facilitate social initiations across three young children (M = 3 years 10…

Eliciting Students' Understanding of a Local Socioscientific Issue through the Use of Critical Response Pedagogies

ERIC Educational Resources Information Center

Karahan, Engin; Andzenge, Senenge T.; Roehrig, Gillian

2017-01-01

This study introduces a critical response pedagogy (CRP), an arts-based critical technique to facilitate meaningful dialogue in focus group settings, to secondary school science education students to engage them in discussion about sediment and chemical load in their local river basin community. Using a holistic single case design, twenty-two 11th…

Organisational Learning and HRD: How Appropriate Are They for Small Firms?

ERIC Educational Resources Information Center

Saru, Essi

2007-01-01

Purpose: The purpose of this paper is to study human resource development (HRD) and organisational learning issues in a small expert organisation. Design/methodology/approach: This is a qualitative single case study conducted in one Finnish SME. It is part of an ongoing study. It is descriptive in nature and the aim is to find out whether the…

The Experience of a Man with Severe Challenging Behaviour Following Resettlement from Hospital: A Single Case Design

ERIC Educational Resources Information Center

Bissell, Lianne; Phillips, Neil; Kroese, Biza Stenfert

2005-01-01

Carers' behaviour is thought to contribute to the development and maintenance of challenging behaviour in people with learning disabilities (Emerson et al. 1995; Hastings & Remington 1994). The present study sought to investigate the effectiveness of a behavioural intervention in the management of such problem behaviours by means of a long-term…

The Evaluation of Health Education Program (HEP) of 9th Graders

ERIC Educational Resources Information Center

Erdogan, Polat; Gürol, Mehmet

2016-01-01

The main purpose of evaluation is to improve the quality of program. So, the purpose of this study was to evaluate the Health Education Program of 9th graders (HEP) with Educational Criticism Model of Eisner. The study was conducted with the qualitative research method. A holistic single case design was employed in this study. The typical case…

eCoaching across Routines to Enhance Teachers' Use of Modeling

ERIC Educational Resources Information Center

Coogle, Christan Grygas; Rahn, Naomi L.; Ottley, Jennifer Riggie; Storie, Sloan

2016-01-01

The purpose of this research was to determine the impact of eCoaching on two special education teachers' use of modeling strategies across child-led, teacher-led, and mealtime routines. A multiple-probe, single-case design was used to determine the effects of eCoaching on teachers' use of three modeling strategies. Each of the three strategies was…

Effects of Video Modeling on the Instructional Efficiency of Simultaneous Prompting among Preschoolers with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Genc-Tosun, Derya; Kurt, Onur

2017-01-01

The purpose of the present study was to compare the effectiveness and efficiency of simultaneous prompting with and without video modeling in teaching food preparation skills to four participants with autism spectrum disorder, whose ages ranged from 5 to 6 years old. An adapted alternating treatment single-case experimental design was used to…

"More Confident Going into College": Lessons Learned from Multiple Stakeholders in a New Blended Learning Initiative

ERIC Educational Resources Information Center

Whiteside, Aimee L.; Garrett Dikkers, Amy; Lewis, Somer

2016-01-01

This article examined a blended learning initiative in a large suburban high school in the Midwestern region of the United States. It employed a single-case exploratory design approach to learn about the experience of administrators, teachers, students, and parents. Using Zimmerman's Self-Regulated Learning (SRL) Theory as a guiding framework,…

Consultation and Collaboration to Develop and Implement Restorative Practices in a Culturally and Linguistically Diverse Elementary School

ERIC Educational Resources Information Center

Ingraham, Colette L.; Hokoda, Audrey; Moehlenbruck, Derek; Karafin, Monica; Manzo, Caroline; Ramirez, Daniel

2016-01-01

Through an embedded single-case study design and qualitative methods, this article describes the school-wide implementation and preliminary results of a restorative practices (RP) program within a culturally and linguistically diverse (CLD) elementary school. Located in an urban area with high rates of crime, violence, and poverty, the three-year…

Effects of a Strategic Intervention with iPad Practice on the Multiplication Fact Performance of Fifth-Grade Students with Learning Disabilities

ERIC Educational Resources Information Center

Ok, Min Wook; Bryant, Diane Pedrotty

2016-01-01

This study investigated the effects of explicit, strategic intervention with iPad application practice on the multiplication fact performance and strategy use of elementary students with learning disabilities (LD) using a single-case, multiple probe design across participants. Four fifth-grade students with LD received 15 1:1 intervention sessions…

The Use of AJAX in Searching a Bibliographic Database: A Case Study of the Italian Biblioteche Oggi Database

ERIC Educational Resources Information Center

Cavaleri, Piero

2008-01-01

Purpose: The purpose of this paper is to describe the use of AJAX for searching the Biblioteche Oggi database of bibliographic records. Design/methodology/approach: The paper is a demonstration of how bibliographic database single page interfaces allow the implementation of more user-friendly features for social and collaborative tasks. Findings:…

Reimagining Gender through Policy Development: The Case of a "Single-Sex" Educational Organisation

ERIC Educational Resources Information Center

Douthirt Cohen, Beth

2012-01-01

In 2005, a feminist educational organisation in the USA for young women, ages 14-21, adopted a policy in order to clarify their target constituency of girls and young women. The policy defined "girls and young women" not as a designation associated with fixed biological sex, but instead as a self-determined identity label creating an explicit…

Department Involvement in Instructional Materials Development for ODL Study at the Zimbabwe Open University (ZOU)

ERIC Educational Resources Information Center

Tanyanyiwa, Vincent Itai; Mutambanengwe, Betty

2015-01-01

The teaching and designing of modules at Zimbabwe Open University (ZOU) is the principal responsibility of a single body of teaching staff, although some authors and content reviewers could be sourced from elsewhere if they are not available in ZOU. This survey, through a case study, examines the involvement of lecturers and staff in the…

Efficacy of cognitive-behavioral therapy for insomnia associated with traumatic brain injury: a single-case experimental design.

PubMed

Ouellet, Marie-Christine; Morin, Charles M

2007-12-01

To test the efficacy of a cognitive-behavioral therapy (CBT) for insomnia in persons having sustained traumatic brain injury (TBI). Single-case design with multiple baselines across participants. Outpatient rehabilitation center. Eleven subjects having sustained mild to severe TBI who developed insomnia after the injury. Eight-week CBT for insomnia including stimulus control, sleep restriction, cognitive restructuring, sleep hygiene education, and fatigue management. Total wake time, sleep efficiency, and diagnostic criteria. Visual analyses, corroborated by intervention time series analyses and t tests, revealed clinically and statistically significant reductions in total wake time and sleep efficiency for 8 (73%) of 11 participants. An average reduction of 53.9% in total wake time was observed across participants from pre- to post-treatment. Progress was in general well maintained at the 1-month and 3-month follow-ups. The average sleep efficiency augmented significantly from pretreatment (77.2%) to post-treatment (87.9%), and also by the 3-month follow-up (90.9%). Improvements in sleep were accompanied by a reduction in symptoms of general and physical fatigue. The results of this study show that psychologic interventions for insomnia are a promising therapeutic avenue for TBI survivors.

Imagery Rescripting for Body Dysmorphic Disorder: A Multiple-Baseline Single-Case Experimental Design.

PubMed

Willson, Rob; Veale, David; Freeston, Mark

2016-03-01

Individuals with body dysmorphic disorder (BDD) often experience negative distorted images of their appearance, and research suggests these may be linked to memories of adverse events such as bullying or teasing. This study evaluates imagery rescripting (ImR) as an intervention for BDD. In this article, we present a multiple-baseline single-case experimental design testing imagery rescripting as a brief, stand-alone intervention, with six individuals with BDD that related to aversive memories. The impact of the intervention was assessed by self-reported daily measures of symptom severity (preoccupation with appearance, appearance-related checking behaviors, appearance-related distress, and strength of belief that their main problem is their appearance) and standardized clinician ratings of BDD severity (Yale-Brown Obsessive Compulsive Scale modified for BDD). Four out of six of the participants responded positively to the intervention, with clinically meaningful improvement in symptomatology. Overall response was rapid; improvements began within the first week post-ImR intervention. From a small sample it is cautiously concluded that imagery rescripting may show promise as a module in cognitive-behavioral therapy for BDD, and is worthy of further investigation. Copyright © 2015. Published by Elsevier Ltd.

Google Calendar: A single case experimental design study of a man with severe memory problems

PubMed Central

Baldwin, Victoria N.; Powell, Theresa

2015-01-01

A single case experimental design across behaviours was utilised to explore the effectiveness of Google Calendar text alerts delivered to a mobile phone as a memory aid. The participant was a 43-year-old man (JA) with severe memory problems and executive difficulties caused by a traumatic brain injury (TBI). JA was initially very unwilling to use any memory aid and so a detailed assessment of his beliefs about memory aids, his cognitive difficulties and his social context was performed and a set of specifications for an aid was produced collaboratively. Six weeks of baseline data and six weeks of intervention data were collected for three target memory behaviours and three control memory behaviours. Results were analysed using nonoverlap of all pairs (NAP) analysis which showed a reduction in forgetting in the three target behaviours and no change in two of the three control behaviours. A subjective measure (the revised Everyday Memory Questionnaire) also suggested improvement. This study illustrates that Google Calendar is a highly effective memory aid and emphasises the importance of choosing a memory aid to suit the person's lifestyle and beliefs. PMID:25263266

Therapist-aided exposure for women with lifelong vaginismus: a replicated single-case design.

PubMed

Ter Kuile, Moniek M; Bulté, Isis; Weijenborg, Philomeen T M; Beekman, Aart; Melles, Reinhilde; Onghena, Patrick

2009-02-01

Vaginismus is commonly described as a persistent difficulty in allowing vaginal entry of a penis or other object. Lifelong vaginismus occurs when a woman has never been able to have intercourse. A replicated single-case A-B-phase design was used to investigate the effectiveness of therapist-aided exposure for lifelong vaginismus. A baseline period (Phase A) was contrasted with exposure + follow-up (Phase B), using random switching between phases. The main outcome measure (intercourse ability) was assessed daily for 24 weeks. Ten women participated. The exposure consisted of a maximum of three 2-hr sessions during 1 week at a university hospital. The participant performed vaginal penetration exercises on herself, in the presence of a female therapist. Two follow-up sessions were scheduled over a 5-week period. Nine of the 10 participants reported having intercourse after treatment, and in 5 of the 9, intercourse was possible within the 1st week of treatment. The results remained at 1-year follow-up. Furthermore, exposure was successful in decreasing fear and negative penetration beliefs posttreatment and at 3-month and 1-year follow-ups. Therapist-aided exposure appears to be an effective treatment for lifelong vaginismus.

Differentiation of African components of ancestry to stratify groups in a case-control study of a Brazilian urban population.

PubMed

Silbiger, Vivian N; Hirata, Mario H; Luchessi, Andre D; Genvigir, Fabiana D V; Cerda, Alvaro; Rodrigues, Alice C; Willrich, Maria A V; Arazi, Simone S; Dorea, Egidio L; Bernik, Marcia M S; Faludi, Andre A; Bertolami, Marcelo C; Santos, Carla; Carracedo, Angel; Salas, Antonio; Freire, Ana; Lareu, Maria Victoria; Phillips, Christopher; Porras-Hurtado, Liliana; Fondevila, Manuel; Hirata, Rosario D C

2012-06-01

Balancing the subject composition of case and control groups to create homogenous ancestries between each group is essential for medical association studies. We explored the applicability of single-tube 34-plex ancestry informative markers (AIM) single nucleotide polymorphisms (SNPs) to estimate the African Component of Ancestry (ACA) to design a future case-control association study of a Brazilian urban sample. One hundred eighty individuals (107 case group; 73 control group) self-described as white, brown-intermediate or black were selected. The proportions of the relative contribution of a variable number of ancestral population components were similar between case and control groups. Moreover, the case and control groups demonstrated similar distributions for ACA <0.25 and >0.50 categories. Notably a high number of outlier values (23 samples) were observed among individuals with ACA <0.25. These individuals presented a high probability of Native American and East Asian ancestral components; however, no individuals originally giving these self-described ancestries were observed in this study. The strategy proposed for the assessment of ancestry and adjustment of case and control groups for an association study is an important step for the proper construction of the study, particularly when subjects are taken from a complex urban population. This can be achieved using a straight forward multiplexed AIM-SNPs assay of highly discriminatory ancestry markers.

Design and validity of a clinic-based case-control study on the molecular epidemiology of lymphoma

PubMed Central

Cerhan, James R; Fredericksen, Zachary S; Wang, Alice H; Habermann, Thomas M; Kay, Neil E; Macon, William R; Cunningham, Julie M; Shanafelt, Tait D; Ansell, Stephen M; Call, Timothy G; Witzig, Thomas E; Slager, Susan L; Liebow, Mark

2011-01-01

We present the design features and implementation of a clinic-based case-control study on the molecular epidemiology of lymphoma conducted at the Mayo Clinic (Rochester, Minnesota, USA), and then assess the internal and external validity of the study. Cases were newly diagnosed lymphoma patients from Minnesota, Iowa and Wisconsin seen at Mayo and controls were patients from the same region without lymphoma who had a pre-scheduled general medical examination, frequency matched on age, sex and residence. Overall response rates were 67% for cases and 70% for controls; response rates were lower for cases and controls over age 70 years, cases with more aggressive disease, and controls from the local area, although absolute differences were modest. Cases and controls were well-balanced on age, sex, and residence characteristics. Demographic and disease characteristics of NHL cases were similar to population-based cancer registry data. Control distributions were similar to population-based data on lifestyle factors and minor allele frequencies of over 500 SNPs, although smoking rates were slightly lower. Associations with NHL in the Mayo study for smoking, alcohol use, family history of lymphoma, autoimmune disease, asthma, eczema, body mass index, and single nucleotide polymorphisms in TNF (rs1800629), LTA (rs909253), and IL10 (rs1800896) were at a magnitude consistent with estimates from pooled studies in InterLymph, with history of any allergy the only directly discordant result in the Mayo study. These data suggest that this study should have strong internal and external validity. This framework may be useful to others who are designing a similar study. PMID:21686124

How Can Single-Case Data Be Analyzed? Software Resources, Tutorial, and Reflections on Analysis.

PubMed

Manolov, Rumen; Moeyaert, Mariola

2017-03-01

The present article aims to present a series of software developments in the quantitative analysis of data obtained via single-case experimental designs (SCEDs), as well as the tutorial describing these developments. The tutorial focuses on software implementations based on freely available platforms such as R and aims to bring statistical advances closer to applied researchers and help them become autonomous agents in the data analysis stage of a study. The range of analyses dealt with in the tutorial is illustrated on a typical single-case dataset, relying heavily on graphical data representations. We illustrate how visual and quantitative analyses can be used jointly, giving complementary information and helping the researcher decide whether there is an intervention effect, how large it is, and whether it is practically significant. To help applied researchers in the use of the analyses, we have organized the data in the different ways required by the different analytical procedures and made these data available online. We also provide Internet links to all free software available, as well as all the main references to the analytical techniques. Finally, we suggest that appropriate and informative data analysis is likely to be a step forward in documenting and communicating results and also for increasing the scientific credibility of SCEDs.

Ultra-Wide Patch Antenna Array Design at 60 GHz Band for Remote Vital Sign Monitoring with Doppler Radar Principle

NASA Astrophysics Data System (ADS)

Rabbani, Muhammad Saqib; Ghafouri-Shiraz, Hooshang

2017-05-01

In this paper, ultra-wide patch antenna arrays have been presented at 60 GHz band (57.24-65.88 GHz) with improved gain and beam-width capabilities for remote detection of respiration and heart beat rate of a person with Doppler radar principle. The antennas measured and simulation results showed close agreement. The breathing rate (BR) and heart rate (HR) of a 31-year-old man have been accurately detected from various distances ranging from 5 to 200 cm with both single-antenna and dual-antenna operations. In the case of single-antenna operation, the signal is transmitted and received with the same antenna, whereas in dual-antenna operation, two identical antennas are employed, one for signal transmission and the other for reception. It has been found that in case of the single-antenna operation, the accuracy of the remote vital sign monitoring (RVSM) is good for short distance; however, in the case of the dual-antenna operations, the RVSM can be accurately carried out at relatively much longer distance. On the other hand, it has also been seen that the visual results are more obvious with higher gain antennas when the radar beam is confined just on the subject's body area.

Using case study within a sequential explanatory design to evaluate the impact of specialist and advanced practice roles on clinical outcomes: the SCAPE study.

PubMed

Lalor, Joan G; Casey, Dympna; Elliott, Naomi; Coyne, Imelda; Comiskey, Catherine; Higgins, Agnes; Murphy, Kathy; Devane, Declan; Begley, Cecily

2013-04-08

The role of the clinical nurse/midwife specialist and advanced nurse/midwife practitioner is complex not least because of the diversity in how the roles are operationalised across health settings and within multidisciplinary teams. This aim of this paper is to use The SCAPE Study: Specialist Clinical and Advanced Practitioner Evaluation in Ireland to illustrate how case study was used to strengthen a Sequential Explanatory Design. In Phase 1, clinicians identified indicators of specialist and advanced practice which were then used to guide the instrumental case study design which formed the second phase of the larger study. Phase 2 used matched case studies to evaluate the effectiveness of specialist and advanced practitioners on clinical outcomes for service users. Data were collected through observation, documentary analysis, and interviews. Observations were made of 23 Clinical Specialists or Advanced Practitioners, and 23 matched clinicians in similar matched non-postholding sites, while they delivered care. Forty-one service users, 41 clinicians, and 23 Directors of Nursing or Midwifery were interviewed, and 279 service users completed a survey based on the components of CS and AP practice identified in Phase 1. A coding framework, and the generation of cross tabulation matrices in NVivo, was used to make explicit how the outcome measures were confirmed and validated from multiple sources. This strengthened the potential to examine single cases that seemed 'different', and allowed for cases to be redefined. Phase 3 involved interviews with policy-makers to set the findings in context. Case study is a powerful research strategy to use within sequential explanatory mixed method designs, and adds completeness to the exploration of complex issues in clinical practice. The design is flexible, allowing the use of multiple data collection methods from both qualitative and quantitative paradigms. Multiple approaches to data collection are needed to evaluate the impact of complex roles and interventions in health care outcomes and service delivery. Case study design is an appropriate methodology to use when study outcomes relate to clinical practice.

Design and analysis of multiple diseases genome-wide association studies without controls.

PubMed

Chen, Zhongxue; Huang, Hanwen; Ng, Hon Keung Tony

2012-11-15

In genome-wide association studies (GWAS), multiple diseases with shared controls is one of the case-control study designs. If data obtained from these studies are appropriately analyzed, this design can have several advantages such as improving statistical power in detecting associations and reducing the time and cost in the data collection process. In this paper, we propose a study design for GWAS which involves multiple diseases but without controls. We also propose corresponding statistical data analysis strategy for GWAS with multiple diseases but no controls. Through a simulation study, we show that the statistical association test with the proposed study design is more powerful than the test with single disease sharing common controls, and it has comparable power to the overall test based on the whole dataset including the controls. We also apply the proposed method to a real GWAS dataset to illustrate the methodologies and the advantages of the proposed design. Some possible limitations of this study design and testing method and their solutions are also discussed. Our findings indicate that the proposed study design and statistical analysis strategy could be more efficient than the usual case-control GWAS as well as those with shared controls. Copyright © 2012 Elsevier B.V. All rights reserved.

Freestyle multiple propeller flap reconstruction (jigsaw puzzle approach) for complicated back defects.

PubMed

Park, Sung Woo; Oh, Tae Suk; Eom, Jin Sup; Sun, Yoon Chi; Suh, Hyun Suk; Hong, Joon Pio

2015-05-01

The reconstruction of the posterior trunk remains to be a challenge as defects can be extensive, with deep dead space, and fixation devices exposed. Our goal was to achieve a tension-free closure for complex defects on the posterior trunk. From August 2006 to May 2013, 18 cases were reconstructed with multiple flaps combining perforator(s) and local skin flaps. The reconstructions were performed using freestyle approach. Starting with propeller flap(s) in single or multilobed design and sequentially in conjunction with adjacent random pattern flaps such as fitting puzzle. All defects achieved tensionless primary closure. The final appearance resembled a jigsaw puzzle-like appearance. The average size of defect was 139.6 cm(2) (range, 36-345 cm(2)). A total of 26 perforator flaps were used in addition to 19 random pattern flaps for 18 cases. In all cases, a single perforator was used for each propeller flap. The defect and the donor site all achieved tension-free closure. The reconstruction was 100% successful without flap loss. One case of late infection was noted at 12 months after surgery. Using multiple lobe designed propeller flaps in conjunction with random pattern flaps in a freestyle approach, resembling putting a jigsaw puzzle together, we can achieve a tension-free closure by distributing the tension to multiple flaps, supplying sufficient volume to obliterate dead space, and have reliable vascularity as the flaps do not need to be oversized. This can be a viable approach to reconstruct extensive defects on the posterior trunk. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Legibility of Text and Pictograms in Variable Message Signs: Can Single-Word Messages Outperform Pictograms?

PubMed

Roca, Javier; Insa, Beatriz; Tejero, Pilar

2018-05-01

The current research shows the advantage of single-word messages in the particular case of variable message signs (VMSs) with a high aspect ratio. Early studies on traffic sign design proposed that pictorial information would advantage equivalent text messages in static signs. We used a driving simulator to present individually 36 VMSs, showing six words (e.g., "congestion") and six danger signs (e.g., congestion traffic sign). In Experiment 1, 18 drivers read aloud the text or orally identified the pictograms as soon as they could correctly do it. In Experiment 2, a different sample of 18 drivers gave a motor response, according to the meaning of the message. We analyzed the legibility distance and accuracy, driving performance (speed variability), and glance behavior. Our results show that single-word messages were associated with better performance (farther reading distances) and required less visual demands (fewer glances and less glancing times) than pictograms. As typical configurations of VMSs usually have a high aspect ratio, and thus allow large character heights, single-word messages can outperform the legibility of pictograms. However, the final advantage of text or pictorial messages would depend on several factors, such as the driver's knowledge of the language and the pictogram set, the use of single or multiple words, the particular design and size of critical details in letters and pictograms, environmental factors, and driver age. Potential applications include the design of VMSs and other devices aimed at displaying text and/or pictograms with a high aspect ratio.

Theory of the synchronous motion of an array of floating flap gates oscillating wave surge converter

NASA Astrophysics Data System (ADS)

Michele, Simone; Sammarco, Paolo; d'Errico, Michele

2016-08-01

We consider a finite array of floating flap gates oscillating wave surge converter (OWSC) in water of constant depth. The diffraction and radiation potentials are solved in terms of elliptical coordinates and Mathieu functions. Generated power and capture width ratio of a single gate excited by incoming waves are given in terms of the radiated wave amplitude in the far field. Similar to the case of axially symmetric absorbers, the maximum power extracted is shown to be directly proportional to the incident wave characteristics: energy flux, angle of incidence and wavelength. Accordingly, the capture width ratio is directly proportional to the wavelength, thus giving a design estimate of the maximum efficiency of the system. We then compare the array and the single gate in terms of energy production. For regular waves, we show that excitation of the out-of-phase natural modes of the array increases the power output, while in the case of random seas we show that the array and the single gate achieve the same efficiency.

The physical environment and patients' activities and care: A comparative case study at three newly built stroke units.

PubMed

Anåker, Anna; von Koch, Lena; Sjöstrand, Christina; Heylighen, Ann; Elf, Marie

2018-04-20

To explore and compare the impact of the physical environment on patients' activities and care at three newly built stroke units. Receiving care in a stroke unit instead of in a general ward reduces the odds of death, dependency and institutionalized care. In stroke units, the design of the physical environment should support evidence-based care. Studies on patients' activities in relation to the design of the physical environment of stroke units are scarce. This work is a comparative descriptive case study. Patients (N = 55) who had a confirmed diagnosis of stroke were recruited from three newly built stroke units in Sweden. The units were examined by non-participant observation using two types of data collection: behavioural mapping analysed with descriptive statistics and field note taking analysed with deductive content analysis. Data were collected from April 2013 - December 2015. The units differed in the patients' levels of physical activity, the proportion of the day that patients spent with health professionals and family presence. Patients were more physically active in a unit with a combination of single and multi-bed room designs than in a unit with an entirely single-room design. Stroke units that were easy to navigate and offered variations in the physical environment had an impact on patients' activities and care. Patients' activity levels and interactions appeared to vary with the design of the physical environments of stroke units. Stroke guidelines focused on health status assessments, avoidance of bed-rest and early rehabilitation require a supportive physical environment. © 2018 The Authors. Journal of Advanced Nursing Published by John Wiley & Sons Ltd.

Launch Vehicle Propulsion Parameter Design Multiple Selection Criteria

NASA Technical Reports Server (NTRS)

Shelton, Joey Dewayne

2004-01-01

The optimization tool described herein addresses and emphasizes the use of computer tools to model a system and focuses on a concept development approach for a liquid hydrogen/liquid oxygen single-stage-to-orbit system, but more particularly the development of the optimized system using new techniques. This methodology uses new and innovative tools to run Monte Carlo simulations, genetic algorithm solvers, and statistical models in order to optimize a design concept. The concept launch vehicle and propulsion system were modeled and optimized to determine the best design for weight and cost by varying design and technology parameters. Uncertainty levels were applied using Monte Carlo Simulations and the model output was compared to the National Aeronautics and Space Administration Space Shuttle Main Engine. Several key conclusions are summarized here for the model results. First, the Gross Liftoff Weight and Dry Weight were 67% higher for the design case for minimization of Design, Development, Test and Evaluation cost when compared to the weights determined by the minimization of Gross Liftoff Weight case. In turn, the Design, Development, Test and Evaluation cost was 53% higher for optimized Gross Liftoff Weight case when compared to the cost determined by case for minimization of Design, Development, Test and Evaluation cost. Therefore, a 53% increase in Design, Development, Test and Evaluation cost results in a 67% reduction in Gross Liftoff Weight. Secondly, the tool outputs define the sensitivity of propulsion parameters, technology and cost factors and how these parameters differ when cost and weight are optimized separately. A key finding was that for a Space Shuttle Main Engine thrust level the oxidizer/fuel ratio of 6.6 resulted in the lowest Gross Liftoff Weight rather than at 5.2 for the maximum specific impulse, demonstrating the relationships between specific impulse, engine weight, tank volume and tank weight. Lastly, the optimum chamber pressure for Gross Liftoff Weight minimization was 2713 pounds per square inch as compared to 3162 for the Design, Development, Test and Evaluation cost optimization case. This chamber pressure range is close to 3000 pounds per square inch for the Space Shuttle Main Engine.

Use of the PARC code to estimate the off-design transonic performance of an over/under turboramjet nozzle

NASA Technical Reports Server (NTRS)

Lam, David W.

1995-01-01

The transonic performance of a dual-throat, single-expansion-ramp nozzle (SERN) was investigated with a PARC computational fluid dynamics (CFD) code, an external flow Navier-Stokes solver. The nozzle configuration was from a conceptual Mach 5 cruise aircraft powered by four air-breathing turboramjets. Initial test cases used the two-dimensional version of PARC in Euler mode to investigate the effect of geometric variation on transonic performance. Additional cases used the two-dimensional version in viscous mode and the three-dimensional version in both Euler and viscous modes. Results of the analysis indicate low nozzle performance and a highly three-dimensional nozzle flow at transonic conditions. In another comparative study using the PARC code, a single-throat SERN configuration for which experimental data were available at transonic conditions was used to validate the results of the over/under turboramjet nozzle.

Moderation of effects of AAC based on setting and types of aided AAC on outcome variables: an aggregate study of single-case research with individuals with ASD.

PubMed

Ganz, Jennifer B; Rispoli, Mandy J; Mason, Rose Ann; Hong, Ee Rea

2014-06-01

The purpose of this meta-analysis was to evaluate the potential moderating effects of intervention setting and type of aided augmentative and alternative communication (AAC) on outcome variables for students with autism spectrum disorders. Improvement rate difference, an effect size measure, was used to calculate aggregate effects across 35 single-case research studies. Results indicated that the largest effects for aided AAC were observed in general education settings. With respect to communication outcomes, both speech generating devices (SGDs) and the Picture Exchange Communication System (PECS) were associated with larger effects than other picture-based systems. With respect to challenging behaviour outcomes, SGDs produced larger effects than PECS. This aggregate study highlights the importance of considering intervention setting, choice of AAC system and target outcomes when designing and planning an aided AAC intervention.

Violations of Assumptions in School-Based Single-Case Data: Implications for the Selection and Interpretation of Effect Sizes.

PubMed

Solomon, Benjamin George

2014-07-01

A wide variety of effect sizes (ESs) has been used in the single-case design literature. Several researchers have "stress tested" these ESs by subjecting them to various degrees of problem data (e.g., autocorrelation, slope), resulting in the conditions by which different ESs can be considered valid. However, on the back end, few researchers have considered how prevalent and severe these problems are in extant data and as a result, how concerned applied researchers should be. The current study extracted and aggregated indicators of violations of normality and independence across four domains of educational study. Significant violations were found in total and across fields, including low levels of autocorrelation and moderate levels of absolute trend. These violations affect the selection and interpretation of ESs at the individual study level and for meta-analysis. Implications and recommendations are discussed. © The Author(s) 2013.

LEGO: A modular accelerator design code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Y.; Donald, M.; Irwin, J.

1997-08-01

An object-oriented accelerator design code has been designed and implemented in a simple and modular fashion. It contains all major features of its predecessors: TRACY and DESPOT. All physics of single-particle dynamics is implemented based on the Hamiltonian in the local frame of the component. Components can be moved arbitrarily in the three dimensional space. Several symplectic integrators are used to approximate the integration of the Hamiltonian. A differential algebra class is introduced to extract a Taylor map up to arbitrary order. Analysis of optics is done in the same way both for the linear and nonlinear case. Currently, themore » code is used to design and simulate the lattices of the PEP-II. It will also be used for the commissioning.« less

Development of a sensor for temperature and water concentration in combustion gases using a single tunable diode laser

NASA Astrophysics Data System (ADS)

Zhou, Xin; Liu, Xiang; Jeffries, Jay B.; Hanson, R. K.

2003-08-01

The water vapour spectrum in the 1-2 µm near-infrared region is systematically analysed to find the best absorption transitions for sensitive measurement of H2O concentration and temperature in combustion environments using a single tunable diode laser with typical distributed feedback single-mode scanning range (1 cm-1). The use of a single laser, even with relatively narrow tuning range, can offer distinct advantages over wavelength-multiplexing techniques. The strategy and spectroscopic criteria for selecting optimum wavelength regions and absorption line combinations are discussed. It should be stressed that no single figure of merit can be derived to simplify the selection process, and the optimum line pair should be chosen case by case. Our investigation reveals that the 1.8 µm spectral region is especially promising, and we have identified 10 of the best water line pairs in this spectral region for temperature measurements in flames. Based on these findings, a pair of H2O transitions near 1.8 µm was targeted for the design and development of an initial single-laser sensor for simultaneously measuring H2O concentration and temperature in atmospheric-pressure flames. As part of the sensor development effort, fundamental spectroscopic parameters including the line strength, line-centre frequency and lower state energies of the probed transitions were measured experimentally to improve the current databases. We conclude with demonstration results in a steady and a forced atmospheric-pressure laboratory combustor.

The Role of Different Types of Feedback in the Reciprocal Interaction of Teaching Performance and Self-Efficacy Belief

ERIC Educational Resources Information Center

Akkuzu, Nalan

2014-01-01

The purpose of this study was to explore the role of feedback based on self-efficacy belief sources in the reciprocal interaction of teaching performance and self-efficacy beliefs. A single case study design was employed to address and began to bridge the gap in our understanding of the relationship between feedback, self-efficacy belief and…

Study of solution procedures for nonlinear structural equations

NASA Technical Reports Server (NTRS)

Young, C. T., II; Jones, R. F., Jr.

1980-01-01

A method for the redution of the cost of solution of large nonlinear structural equations was developed. Verification was made using the MARC-STRUC structure finite element program with test cases involving single and multiple degrees of freedom for static geometric nonlinearities. The method developed was designed to exist within the envelope of accuracy and convergence characteristic of the particular finite element methodology used.

Teaching Functional Play Skills to a Young Child with Autism Spectrum Disorder through Video Self-Modeling

ERIC Educational Resources Information Center

Lee, Sharon Y.; Lo, Ya-yu; Lo, Yafen

2017-01-01

The researchers used a single-case, multiple probe design across three sets of toys (i.e., farm toy, doctor's clinic toy, and rescue toy) to examine the effects of video self-modeling (VSM) on the functional play skills of a 5-year-old child with autism spectrum disorder. The findings showed a functional relation between VSM and increased…

Mentoring to Promote Courage and Confidence among Elementary School Students with Internalizing Problems: A Single-Case Design Pilot Study

ERIC Educational Resources Information Center

Fiat, Aria E.; Cook, Clayton R.; Zhang, Yanchen; Renshaw, Tyler L.; DeCano, Polocarpio; Merrick, Jillian S.

2017-01-01

There is a paucity of selective, Tier 2 interventions that educators can implement for students with internalizing problems as part of their schools' Multi-Tiered Systems of Supports. To fill this void, the authors' purpose was to evaluate the efficacy, acceptability, and integrity of a structured school-based mentoring program, the Courage and…

Examining a New Method to Studying Velopharyngeal Structures in a Child with 22q11.2 Deletion Syndrome

ERIC Educational Resources Information Center

Kollara, Lakshmi; Schenck, Graham; Jaskolka, Michael; Perry, Jamie L.

2017-01-01

Purpose: To date, no studies have imaged the velopharynx in children with 22q11.2 deletion syndrome (22q11.2 DS) without the use of sedation. Dysmorphology in velopharyngeal structures has been shown to have significant negative implications on speech among these individuals. This single case study was designed to assess the feasibility of a…

Ada Software Design Methods Formulation.

DTIC Science & Technology

1982-10-01

cycle organization is also appropriate for another reason. The source material for the case studies is the work of the two contractors who participated in... working version of the system exist. The integration phase takes the pieces developed and combines them into a single working system. Interfaces...hardware, developed separately from the software, is united with the software, and further testing is performed until the system is a working whole

Enhancing Appropriate Social Behaviors for Children with Autism in General Education Classrooms: An Analysis of Six Cases

ERIC Educational Resources Information Center

Yang, Nancy Kueifen; Schaller, James L.; Huang, Tzu-Ai; Wang, Meei Huey; Tsai, Shu-Fei

2003-01-01

This study compares generalized effects of a social-emotional skills training for girls and boys with autism in resource rooms on promoting positive social behaviors in general education classrooms in Taiwan. A single subject design was used to compare outcomes for 2 girls and 2 boys with autism in the experimental group with 2 boys with autism in…

Family Implementation of Positive Behavior Support for a Child with Autism: Longitudinal, Single-Case, Experimental, and Descriptive Replication and Extension

ERIC Educational Resources Information Center

Lucyshyn, Joseph M.; Albin, Richard W.; Horner, Robert H.; Mann, Jane C.; Mann, James A.; Wadsworth, Gina

2007-01-01

This study examined the efficacy, social validity, and durability of a positive behavior support (PBS) approach with the family of a girl with autism and severe problem behavior. The study was conducted across a 10-year period beginning when the child was 5 years old. A multiple baseline across family routines design evaluated the functional…

Identifying Issues and Concerns with the Use of Interval-Based Systems in Single Case Research Using a Pilot Simulation Study

ERIC Educational Resources Information Center

Ledford, Jennifer R.; Ayres, Kevin M.; Lane, Justin D.; Lam, Man Fung

2015-01-01

Momentary time sampling (MTS), whole interval recording (WIR), and partial interval recording (PIR) are commonly used in applied research. We discuss potential difficulties with analyzing data when these systems are used and present results from a pilot simulation study designed to determine the extent to which these issues are likely to be…

Geometric Folding Algorithms: Bridging Theory to Practice

DTIC Science & Technology

2009-11-03

orthogonal polyhedron can be folded from a single, universal crease pattern (box pleating). II. ORIGAMI DESIGN a.) Developed mathematical theory for what...happens in paper between creases, in particular for the case of circular creases. b.) Circular crease origami on permanent exhibition at MoMA in New...Developing mathematical theory of Robert Lang’s TreeMaker framework for efficiently folding tree-shaped origami bases.

The Middle School Reading Coach: Exploring the Coaching Role and Understanding the Role of the Principal in Supporting Coaching Efforts

ERIC Educational Resources Information Center

Young, Mia L.

2012-01-01

The purpose of this qualitative study was twofold. First, using a qualitative, single case study design, I explored the roles and responsibilities of a middle school reading coach to understand how the coach distributed her time to support content area teachers in improving literacy instruction within their content areas. In addition to…

Effects of Adapted Dialogic Reading on Oral Language and Vocabulary Knowledge of Latino Preschoolers at Risk for English Language Delays

ERIC Educational Resources Information Center

Correa, Vivian I.; Lo, Ya-Yu; Godfrey-Hurrell, Kristi; Swart, Katie; Baker, Doris Luft

2015-01-01

In this single-case design study, we examined the effects of an adapted dialogic reading intervention on the oral language and vocabulary skills of four Latino preschool children who were at risk for English language delays. We used adapted dialogic reading strategies in English and two literacy games that included a rapid naming activity and…

The Influence of Public Pedagogy on Adult and Higher Education Learners' Perceptions of and Motivations to Study Abroad at a Hispanic Serving Institution

ERIC Educational Resources Information Center

Nguyen, Shelbee Rhea

2012-01-01

This study utilized qualitative single-case study design to provide rich description and offer new understandings within a socio-cultural theoretical frame about how adult and higher education learners perceive and are motivated to participate in study abroad programs. Three faculty-led study abroad courses at a Hispanic serving institution in the…

The Effects of a Dog Reading Visitation Program on Academic Engagement Behavior in Three Elementary Students with Emotional and Behavioral Disabilities: A Single Case Design

ERIC Educational Resources Information Center

Bassette, Laura A.; Taber-Doughty, Teresa

2013-01-01

Background: Children with emotional and behavioral disabilities (EBD) struggle with behavioral problems during reading activities in school. One way to address these concerns may be through dog reading programs which are increasing in popularity in schools and libraries. Preliminary anecdotal research suggests dog reading programs may improve…

Effects of Modeling, Story Templates, and Self-Graphing in the Use of Story Elements by Students with Moderate Intellectual Disability

ERIC Educational Resources Information Center

Pennington, Robert; Koehler, Mallory

2017-01-01

There is limited research on teaching narrative writing skills to students with moderate to severe intellectual disability. In the current study, we used a multiple probe across participants single case design to evaluate the effects of an intervention package comprised of modeling, story templates, and self-graphing, on the inclusion of story…

The Effect of Contingent Reinforcement on Target Variables in Outpatient Psychotherapy for Depression: A Successful and Unsuccessful Case Using Functional Analytic Psychotherapy

ERIC Educational Resources Information Center

Kanter, Jonathan W.; Landes, Sara J.; Busch, Andrew M.; Rusch, Laura C.; Brown, Keri R.; Baruch, David E.; Holman, Gareth I.

2006-01-01

The current study investigated a behavior-analytic treatment, functional analytic psychotherapy (FAP), for outpatient depression utilizing two single-subject A/A+B designs. The baseline condition was cognitive behavioral therapy. Results demonstrated treatment success in 1 client after the addition of FAP and treatment failure in the 2nd. This…

Functional Analytic Psychotherapy as an Adjunct to Cognitive-Behavioral Treatments for Posttraumatic Stress Disorder: Theory and Application in a Single Case Design

ERIC Educational Resources Information Center

Pedersen, Eric R.; Callaghan, Glenn M.; Prins, Annabel; Nguyen, Hong; Tsai, Mavis

2012-01-01

Evidence-based treatments for Posttraumatic Stress Disorder (PTSD) may be enhanced by Functional Analytic Psychotherapy (FAP; Kohlenberg & Tsai, 1991; Tsai et al., 2009). As PTSD can include a variety of problems with interpersonal relationships (e.g., trust of others), manualized treatments may not afford clinicians enough time and flexibility to…

Corner-Cube Retroreflector Instrument for Advanced Lunar Laser Ranging

NASA Technical Reports Server (NTRS)

Turyshev, Slava G.; Folkner, William M.; Gutt, Gary M.; Williams, James G.; Somawardhana, Ruwan P.; Baran, Richard T.

2012-01-01

A paper describes how, based on a structural-thermal-optical-performance analysis, it has been determined that a single, large, hollow corner cube (170- mm outer diameter) with custom dihedral angles offers a return signal comparable to the Apollo 11 and 14 solid-corner-cube arrays (each consisting of 100 small, solid corner cubes), with negligible pulse spread and much lower mass. The design of the corner cube, and its surrounding mounting and casing, is driven by the thermal environment on the lunar surface, which is subject to significant temperature variations (in the range between 70 and 390 K). Therefore, the corner cube is enclosed in an insulated container open at one end; a narrow-bandpass solar filter is used to reduce the solar energy that enters the open end during the lunar day, achieving a nearly uniform temperature inside the container. Also, the materials and adhesive techniques that will be used for this corner-cube reflector must have appropriate thermal and mechanical characteristics (e.g., silica or beryllium for the cube and aluminum for the casing) to further reduce the impact of the thermal environment on the instrument's performance. The instrument would consist of a single, open corner cube protected by a separate solar filter, and mounted in a cylindrical or spherical case. A major goal in the design of a new lunar ranging system is a measurement accuracy improvement to better than 1 mm by reducing the pulse spread due to orientation. While achieving this goal, it was desired to keep the intensity of the return beam at least as bright as the Apollo 100-corner-cube arrays. These goals are met in this design by increasing the optical aperture of a single corner cube to approximately 170 mm outer diameter. This use of an "open" corner cube allows the selection of corner cube materials to be based primarily on thermal considerations, with no requirements on optical transparency. Such a corner cube also allows for easier pointing requirements, because there is no dependence on total internal reflection, which can fail off-axis.

Low order H∞ optimal control for ACFA blended wing body aircraft

NASA Astrophysics Data System (ADS)

Haniš, T.; Kucera, V.; Hromčík, M.

2013-12-01

Advanced nonconvex nonsmooth optimization techniques for fixed-order H∞ robust control are proposed in this paper for design of flight control systems (FCS) with prescribed structure. Compared to classical techniques - tuning of and successive closures of particular single-input single-output (SISO) loops like dampers, attitude stabilizers, etc. - all loops are designed simultaneously by means of quite intuitive weighting filters selection. In contrast to standard optimization techniques, though (H2, H∞ optimization), the resulting controller respects the prescribed structure in terms of engaged channels and orders (e. g., proportional (P), proportional-integral (PI), and proportional-integralderivative (PID) controllers). In addition, robustness with regard to multimodel uncertainty is also addressed which is of most importance for aerospace applications as well. Such a way, robust controllers for various Mach numbers, altitudes, or mass cases can be obtained directly, based only on particular mathematical models for respective combinations of the §ight parameters.

Light-absorption enhancement design of ultrathin perovskite solar cells with conformal structure

NASA Astrophysics Data System (ADS)

Tan, Xinyu; Sun, Lei; Deng, Can; Tu, Yiteng; Shen, Guangming; Tan, Fengxue; Guan, Li; Yan, Wensheng

2018-06-01

We report a structural design of ultrathin perovskite solar cells based on a conformal structure at the rear surface for potential applications in both single-junction and tandem cells. The light transmittances of the front and the rear surfaces are calculated in the wavelength range of 300–800 nm via the finite difference time domain numerical simulation method. Compared with the reference cell, significant photocurrent density enhancement of 27.5% and 29.7% are achieved when the ratios of height to width of the fluorine doped tin oxide nanoblock are 2 and 3, respectively. For the case with a hole transport material layer, the enhancements of photocurrent density enhancements are 19.2% and 29.0%, respectively. When back Au is removed, the photocurrent density also has notable enhancements of 23.3% and 45.9%, respectively. The achieved results are beneficial for the development of efficient ultrathin single-junction and tandem perovskite solar cells.

"Straight Talk" for African-American heterosexual men: results of a single-arm behavioral intervention trial.

PubMed

Frye, Victoria; Henny, Kirk; Bonner, Sebastian; Williams, Kim; Bond, Keosha T; Hoover, Donald R; Lucy, Debbie; Greene, Emily; Koblin, Beryl A

2013-01-01

In the United States, heterosexual transmission is the second leading cause of HIV/AIDS, and two-thirds of all heterosexually acquired cases diagnosed between 2005 and 2008 occurred among African-Americans. Few HIV prevention interventions have been designed specifically for African-American heterosexual men not seeking clinical treatment. Here we report results of a single-arm intervention trial of a theory-based HIV prevention intervention designed to increase condom use, reduce concurrent partnering and increase HIV testing among heterosexually active African-American men living in high HIV prevalence areas of New York City. We tested our hypothesis using McNemar discordant pairs exact test for binary variables and paired t-tests for continuous variables. We observed statistically significant declines in mean number of total and new female partners, unprotected sex partners, and partner concurrency in both primary and nonprimary sex partnerships between baseline and 3 months postintervention.

The Bimetric cementless total hip replacement: 7-18 year follow-up assessing the influence of acetabular design on survivorship.

PubMed

Russell, R C; Ghassemi, A; Dorrell, J H; Powles, D P

2009-08-01

The purpose of this study was to evaluate the mid- to long-term survivorship of Bimetric cementless total hip replacement and assess how it is affected by the acetabular design. This was a retrospective analysis of 127 Bimetric cementless total hip replacements in 110 patients with a follow-up of 7-18 years. A single design stem and three different cementless metal-backed acetabular designs were used. Patients were assessed clinically using the Harris hip score and radiologically by independent review of current hip radiographs. There was only one case of aseptic loosening of the femoral stem. The earliest acetabular design showed a high failure rate whilst the latter two designs showed a 96% survivorship at a mean of 9.5 years. We conclude that a combination of the bimetric stem with either of the latter acetabular cup designs has a good mid- to long-term performance.

Aerodynamic configuration design using response surface methodology analysis

NASA Technical Reports Server (NTRS)

Engelund, Walter C.; Stanley, Douglas O.; Lepsch, Roger A.; Mcmillin, Mark M.; Unal, Resit

1993-01-01

An investigation has been conducted to determine a set of optimal design parameters for a single-stage-to-orbit reentry vehicle. Several configuration geometry parameters which had a large impact on the entry vehicle flying characteristics were selected as design variables: the fuselage fineness ratio, the nose to body length ratio, the nose camber value, the wing planform area scale factor, and the wing location. The optimal geometry parameter values were chosen using a response surface methodology (RSM) technique which allowed for a minimum dry weight configuration design that met a set of aerodynamic performance constraints on the landing speed, and on the subsonic, supersonic, and hypersonic trim and stability levels. The RSM technique utilized, specifically the central composite design method, is presented, along with the general vehicle conceptual design process. Results are presented for an optimized configuration along with several design trade cases.

Single-case synthesis tools II: Comparing quantitative outcome measures.

PubMed

Zimmerman, Kathleen N; Pustejovsky, James E; Ledford, Jennifer R; Barton, Erin E; Severini, Katherine E; Lloyd, Blair P

2018-03-07

Varying methods for evaluating the outcomes of single case research designs (SCD) are currently used in reviews and meta-analyses of interventions. Quantitative effect size measures are often presented alongside visual analysis conclusions. Six measures across two classes-overlap measures (percentage non-overlapping data, improvement rate difference, and Tau) and parametric within-case effect sizes (standardized mean difference and log response ratio [increasing and decreasing])-were compared to determine if choice of synthesis method within and across classes impacts conclusions regarding effectiveness. The effectiveness of sensory-based interventions (SBI), a commonly used class of treatments for young children, was evaluated. Separately from evaluations of rigor and quality, authors evaluated behavior change between baseline and SBI conditions. SBI were unlikely to result in positive behavior change across all measures except IRD. However, subgroup analyses resulted in variable conclusions, indicating that the choice of measures for SCD meta-analyses can impact conclusions. Suggestions for using the log response ratio in SCD meta-analyses and considerations for understanding variability in SCD meta-analysis conclusions are discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.

An optimal control approach to the design of moving flight simulators

NASA Technical Reports Server (NTRS)

Sivan, R.; Ish-Shalom, J.; Huang, J.-K.

1982-01-01

An abstract flight simulator design problem is formulated in the form of an optimal control problem, which is solved for the linear-quadratic-Gaussian special case using a mathematical model of the vestibular organs. The optimization criterion used is the mean-square difference between the physiological outputs of the vestibular organs of the pilot in the aircraft and the pilot in the simulator. The dynamical equations are linearized, and the output signal is modeled as a random process with rational power spectral density. The method described yields the optimal structure of the simulator's motion generator, or 'washout filter'. A two-degree-of-freedom flight simulator design, including single output simulations, is presented.

Designing a 25-kilowatt high frequency series resonant

NASA Technical Reports Server (NTRS)

Robson, R. R.

1984-01-01

The feasibility of processing 25 kW of power with a single, transistorized, 20 kHz, series resonant converter stage has been demonstrated by the successful design, development, fabrication, and testing of such a device. It employs four Westinghouse D7ST transistors in a full-bridge configuration and operates from a 250-to-350-Vdc input bus. The unit has an overall worst-case efficiency of 93.5% at its full rated output of 1000 V and 25 A dc. A solid-state dc input circuit breaker and output-transient-current limiters are included in and integrated into the design. Circuit details of the converter are presented along with test data.

Architecture for multi-technology real-time location systems.

PubMed

Rodas, Javier; Barral, Valentín; Escudero, Carlos J

2013-02-07

The rising popularity of location-based services has prompted considerable research in the field of indoor location systems. Since there is no single technology to support these systems, it is necessary to consider the fusion of the information coming from heterogeneous sensors. This paper presents a software architecture designed for a hybrid location system where we can merge information from multiple sensor technologies. The architecture was designed to be used by different kinds of actors independently and with mutual transparency: hardware administrators, algorithm developers and user applications. The paper presents the architecture design, work-flow, case study examples and some results to show how different technologies can be exploited to obtain a good estimation of a target position.

Work Models in the Design Process for House Interior and Exterior: Physical or Virtual?

NASA Astrophysics Data System (ADS)

Bradecki, Tomasz; Uherek-Bradecka, Barbara

2017-10-01

The article presents the effects of research on different types of models of single family houses and multifamily houses. Exterior layout and interior functional layout are the main drivers for the final result of a design. Models are an important medium for presentation of architectural designs and play a pivotal role in explaining the first idea to people and potential clients. Although 3D models have unlimited possibilities of representation, some people cannot understand or ‘feel’ the designed space. The authors try to test how to combine the interior and the exterior in a single synthetic model. Several models of different houses have been presented in the article. All the case studies were developed with physical models, 3D models, and 2D hand sketches. The main focus of the work with the models was to achieve a coherent vision for future feeling of open space in designed houses. The research shows how synthetic models might be helpful in the design process. The research was carried in the URBAN model research group (urbanmodel.org, Gliwice, Poland) that consists of academic researchers and architects. The models reflect architectural experience gathered by the authors during their work on theoretical models, architectural projects and by supervision on site during construction site visits. Conclusions might be helpful for developers, architects, interior designers and architecture students.

Realization of single terminated surface of perovskite oxide single crystals and their band profile: (LaAlO3)0.3(Sr2AlTaO6)0.7, SrTiO3 and KTaO3 case study

NASA Astrophysics Data System (ADS)

Tomar, Ruchi; Wadehra, Neha; Budhiraja, Vaishali; Prakash, Bhanu; Chakraverty, S.

2018-01-01

To characterize the physical properties of thin films without ambiguity and design interface with new functionalities, it is essential to have detailed knowledge of physical properties and appropriate estimation of the band profile of perovskite oxide substrates. We have developed and demonstrated a chemical free unified framework to realize single terminated surface of KTaO3, (LaAlO3)0.3 (Sr2AlTaO6)0.7 and SrTiO3 (001) oriented single crystals. The electronic band line-up of these single crystal substrates, using a combination of optical spectroscopy and Kelvin Probe Force Microscopy, has been constructed. A polar-polar interface of KTaO3 and LaBO3 (B-Transition metal ion) before and after the possible surface/electronic reconstruction has also been schematically presented.

Hip resurfacing: a large, US single-surgeon series.

PubMed

Brooks, P J

2016-01-01

Hip resurfacing has been proposed as an alternative to traditional total hip arthroplasty in young, active patients. Much has been learned following the introduction of metal-on-metal resurfacing devices in the 1990s. The triad of a well-designed device, implanted accurately, in the correct patient has never been more critical than with these implants. Following Food and Drug Administration approval in 2006, we studied the safety and effectiveness of one hip resurfacing device (Birmingham Hip Resurfacing) at our hospital in a large, single-surgeon series. We report our early to mid-term results in 1333 cases followed for a mean of 4.3 years (2 to 5.7) using a prospective, observational registry. The mean patient age was 53.1 years (12 to 84); 70% were male and 91% had osteoarthritis. Complications were few, including no dislocations, no femoral component loosening, two femoral neck fractures (0.15%), one socket loosening (0.08%), three deep infections (0.23%), and three cases of metallosis (0.23%). There were no destructive pseudotumours. Overall survivorship at up to 5.7 years was 99.2%. Aseptic survivorship in males under the age of 50 was 100%. We believe this is the largest United States series of a single surgeon using a single resurfacing system. ©2016 The British Editorial Society of Bone & Joint Surgery.

Cumulative sum analysis for experiences of a single-session retrograde intrarenal stone surgery and analysis of predictors for stone-free status.

PubMed

Cho, Sung Yong; Choo, Min Soo; Jung, Jae Hyun; Jeong, Chang Wook; Oh, Sohee; Lee, Seung Bae; Son, Hwancheol; Jeong, Hyeon

2014-01-01

This study investigated the learning curve of a single-session retrograde intrarenal surgery (RIRS) in patients with mid-sized stones. Competence and trainee proficiency for RIRS was assessed using cumulative sum analysis (CUSUM). The study design and the use of patients' information stored in the hospital database were approved by the Institutional Review Board of our institution. A retrospective review was performed for 100 patients who underwent a single-session RIRS. Patients were included if the main stone had a maximal diameter between 10 and 30 mm. The presence of a residual stone was checked on postoperative day 1 and at one-month follow-up visit. Fragmentation efficacy was calculated "removed stone volume (mm(3)) divided by operative time (min)". CUSUM analysis was used for monitoring change in fragmentation efficacy, and we tested whether or not acceptable surgical outcomes were achieved. The mean age was 54.7±14.8 years. Serum creatinine level did not change significantly. Estimated GFR and hemoglobin were within normal limits postoperatively. The CUSUM curve tended to be flat until the 25th case and showed a rising pattern but declined again until the 56th case. After that point, the fragmentation efficacy reached a plateau. The acceptable level of fragmentation efficacy was 25 ml/min. Multivariate logistic regression analyses showed that stone-free rate was significantly lower for cases with multiple stones than those with a single stone (OR = 0.147, CI 0.032 - 0.674, P value  = 0.005) and for cases with higher number of sites (OR = 0.676, CI 0.517 - 0.882, P value  = 0.004). The statistical analysis of RIRS learning experience revealed that 56 cases were required for reaching a plateau in the learning curve. The number of stones and the number of sites were significant predictors for stone-free status.

Design of microarray experiments for genetical genomics studies.

PubMed

Bueno Filho, Júlio S S; Gilmour, Steven G; Rosa, Guilherme J M

2006-10-01

Microarray experiments have been used recently in genetical genomics studies, as an additional tool to understand the genetic mechanisms governing variation in complex traits, such as for estimating heritabilities of mRNA transcript abundances, for mapping expression quantitative trait loci, and for inferring regulatory networks controlling gene expression. Several articles on the design of microarray experiments discuss situations in which treatment effects are assumed fixed and without any structure. In the case of two-color microarray platforms, several authors have studied reference and circular designs. Here, we discuss the optimal design of microarray experiments whose goals refer to specific genetic questions. Some examples are used to illustrate the choice of a design for comparing fixed, structured treatments, such as genotypic groups. Experiments targeting single genes or chromosomic regions (such as with transgene research) or multiple epistatic loci (such as within a selective phenotyping context) are discussed. In addition, microarray experiments in which treatments refer to families or to subjects (within family structures or complex pedigrees) are presented. In these cases treatments are more appropriately considered to be random effects, with specific covariance structures, in which the genetic goals relate to the estimation of genetic variances and the heritability of transcriptional abundances.

Multiple case studies of STEM teachers' orientations to science teaching through engineering design

NASA Astrophysics Data System (ADS)

Rupp, Madeline

The following master's thesis is composed of two manuscripts describing STEM teachers' orientations to science teaching through engineering within the context of the Science Learning through Engineering Design (SLED) partnership. The framework guiding both studies was science teaching orientations, a component of pedagogical content knowledge. Data were collected via semi-structured interviews, multi-day classroom observations, pre- and post-observation interviews, implementation plans, and written reflections. Data sources were analyzed to generate two orientations to science teaching through engineering design for each participant. The first manuscript illustrates a single case study conducted with a sixth grade STEM teacher. Results of this study revealed a detailed picture of the teacher's goals, practices, assessments, and general views when teaching science through engineering design. Common themes across the teacher's instruction were used to characterize her orientations to science teaching through engineering design. Overall, the teacher's orientations showed a shift in her practice from didactic to student-centered methods of teaching as a result of integrating engineering design-based curriculum. The second manuscript describes a comparative case study of two sixth grade SLED participants. Results of this study revealed more complex and diverse relationships between the teachers' orientations to teaching science through engineering design and their instruction. Participants' orientations served as filters for instruction, guided by their divergent purposes for science teaching. Furthermore, their orientations and resulting implementation were developed from knowledge gained in teacher education, implying that teacher educators and researchers can use this framework to learn more about how teachers' knowledge is used to integrate engineering and science practices in the K-12 classroom.

The house mouse (Mus musculus L.) exerts strong differential grain consumption preferences among hard red and white spring wheat (Triticum aestivum L.) varieties in a single-elimination tournament design.

PubMed

Morris, Craig F; Fuerst, E Patrick; McLean, Derek J; Momont, Kathleen; James, Caleb P

2014-11-01

Wheat (Triticum aestivum L.) plays a central role in the health and nutrition of humans. Yet, little is known about possible flavor differences among different varieties. We have developed a model system using the house mouse (Mus musculus L.) to determine feeding preferences as a prelude to extending results to human sensory analysis. Here, we examine the application of a single-elimination tournament design to the analysis of consumption preferences of a set of hard red and hard white spring wheat varieties. A single-elimination tournament design in this case pairs 2 wheat varieties and only 1 of the 2 is advanced to further tests. Preferred varieties were advanced until an overall "winner" was identified; conversely, less desirable varieties were advanced such that an overall "loser" was identified. Hollis and IDO702 were the winner and loser, respectively, for the hard red varieties, and Clear White 515 and WA8123 were the winner and loser, respectively, for the hard white varieties. When using the more powerful protocol of 14 mice and a 4-d trial, differences in mean daily consumption preferences of 2 varieties were separated at P-values as small as 2 × 10(-8) . The single-elimination tournament design is an efficient means of identifying the most and least desirable varieties among a larger set of samples. One application for identifying the 2 extremes in preference within a group of varieties would be to use them as parents of a population to identify quantitative trait loci for preference. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Designing single- and multiple-shell sampling schemes for diffusion MRI using spherical code.

PubMed

Cheng, Jian; Shen, Dinggang; Yap, Pew-Thian

2014-01-01

In diffusion MRI (dMRI), determining an appropriate sampling scheme is crucial for acquiring the maximal amount of information for data reconstruction and analysis using the minimal amount of time. For single-shell acquisition, uniform sampling without directional preference is usually favored. To achieve this, a commonly used approach is the Electrostatic Energy Minimization (EEM) method introduced in dMRI by Jones et al. However, the electrostatic energy formulation in EEM is not directly related to the goal of optimal sampling-scheme design, i.e., achieving large angular separation between sampling points. A mathematically more natural approach is to consider the Spherical Code (SC) formulation, which aims to achieve uniform sampling by maximizing the minimal angular difference between sampling points on the unit sphere. Although SC is well studied in the mathematical literature, its current formulation is limited to a single shell and is not applicable to multiple shells. Moreover, SC, or more precisely continuous SC (CSC), currently can only be applied on the continuous unit sphere and hence cannot be used in situations where one or several subsets of sampling points need to be determined from an existing sampling scheme. In this case, discrete SC (DSC) is required. In this paper, we propose novel DSC and CSC methods for designing uniform single-/multi-shell sampling schemes. The DSC and CSC formulations are solved respectively by Mixed Integer Linear Programming (MILP) and a gradient descent approach. A fast greedy incremental solution is also provided for both DSC and CSC. To our knowledge, this is the first work to use SC formulation for designing sampling schemes in dMRI. Experimental results indicate that our methods obtain larger angular separation and better rotational invariance than the generalized EEM (gEEM) method currently used in the Human Connectome Project (HCP).

Design and Study of a LOX/GH2 Throttleable Swirl Injector for Rocket Applications

NASA Technical Reports Server (NTRS)

Greene, Christopher; Woodward, Roger; Pal, Sibtosh; Santoro, Robert; Garcia, Roberto (Technical Monitor)

2002-01-01

A LOX/GH2 swirl injector was designed for a 10:1 propellant throttling range. To accomplish this, a dual LOX (liquid oxygen) manifold was used feeding a single common vortex chamber of the swirl element. Hot-fire experiments were conducting for rocket chamber pressures from 80 to 800 psia at a mixture ratio of nominally 6.0 using steady flow, single-point-per-firing cases as well as dynamic throttling conditions. Low frequency (mean) and high frequency (fluctuating) pressure transducer data, flow meter measurements, and Raman spectroscopy images for mixing information were obtained. The injector design, experimental setup, low frequency pressure data, and injector performance analysis will be presented. C efficiency was very high (approximately 100%) at the middle of the throttle-able range with somewhat lower performance at the high and low ends. From the analysis of discreet steady state operating conditions, injector pressure drop was slightly higher than predicted with an inviscid analysis, but otherwise agreed well across the design throttling range. Analysis of the dynamic throttling data indicates that the injector may experience transient conditions that effect pressure drop and performance when compared to steady state results.

Matching technique yields optimum LNA performance. [Low Noise Amplifiers

NASA Technical Reports Server (NTRS)

Sifri, J. D.

1986-01-01

The present article is concerned with a case in which an optimum noise figure and unconditional stability have been designed into a 2.385-GHz low-noise preamplifier via an unusual method for matching the input with a suspended line. The results obtained with several conventional line-matching techniques were not satisfactory. Attention is given to the minimization of thermal noise, the design procedure, requirements for a high-impedance line, a sampling of four matching networks, the noise figure of the single-line matching network as a function of frequency, and the approaches used to achieve unconditional stability.

Transmission loss optimization in acoustic sandwich panels

NASA Astrophysics Data System (ADS)

Makris, S. E.; Dym, C. L.; MacGregor Smith, J.

1986-06-01

Considering the sound transmission loss (TL) of a sandwich panel as the single objective, different optimization techniques are examined and a sophisticated computer program is used to find the optimum TL. Also, for one of the possible case studies such as core optimization, closed-form expressions are given between TL and the core-design variables for different sets of skins. The significance of these functional relationships lies in the fact that the panel designer can bypass the necessity of using a sophisticated software package in order to assess explicitly the dependence of the TL on core thickness and density.

Evaluating the Effect of Minimizing Screws on Stabilization of Symphysis Mandibular Fracture by 3D Finite Element Analysis.

PubMed

Kharmanda, Ghias; Kharma, Mohamed-Yaser

2017-06-01

The objective of this work is to integrate structural optimization and reliability concepts into mini-plate fixation strategy used in symphysis mandibular fractures. The structural reliability levels are next estimated when considering a single failure mode and multiple failure modes. A 3-dimensional finite element model is developed in order to evaluate the ability of reducing the negative effect due to the stabilization of the fracture. Topology optimization process is considered in the conceptual design stage to predict possible fixation layouts. In the detailed design stage, suitable mini-plates are selected taking into account the resulting topology and different anatomical considerations. Several muscle forces are considered in order to obtain realistic predictions. Since some muscles can be cut or harmed during the surgery and cannot operate at its maximum capacity, there is a strong motivation to introduce the loading uncertainties in order to obtain reliable designs. The structural reliability is carried out for a single failure mode and multiple failure modes. The different results are validated with a clinical case of a male patient with symphysis fracture. In this case while use of the upper plate fixation with four holes, only two screws were applied to protect adjacent vital structure. This behavior does not affect the stability of the fracture. The proposed strategy to optimize bone plates leads to fewer complications and second surgeries, less patient discomfort, and shorter time of healing.

Multiobjective optimization techniques for structural design

NASA Technical Reports Server (NTRS)

Rao, S. S.

1984-01-01

The multiobjective programming techniques are important in the design of complex structural systems whose quality depends generally on a number of different and often conflicting objective functions which cannot be combined into a single design objective. The applicability of multiobjective optimization techniques is studied with reference to simple design problems. Specifically, the parameter optimization of a cantilever beam with a tip mass and a three-degree-of-freedom vabration isolation system and the trajectory optimization of a cantilever beam are considered. The solutions of these multicriteria design problems are attempted by using global criterion, utility function, game theory, goal programming, goal attainment, bounded objective function, and lexicographic methods. It has been observed that the game theory approach required the maximum computational effort, but it yielded better optimum solutions with proper balance of the various objective functions in all the cases.

Terahertz bandwidth all-optical Hilbert transformers based on long-period gratings.

PubMed

Ashrafi, Reza; Azaña, José

2012-07-01

A novel, all-optical design for implementing terahertz (THz) bandwidth real-time Hilbert transformers is proposed and numerically demonstrated. An all-optical Hilbert transformer can be implemented using a uniform-period long-period grating (LPG) with a properly designed amplitude-only grating apodization profile, incorporating a single π-phase shift in the middle of the grating length. The designed LPG-based Hilbert transformers can be practically implemented using either fiber-optic or integrated-waveguide technologies. As a generalization, photonic fractional Hilbert transformers are also designed based on the same optical platform. In this general case, the resulting LPGs have multiple π-phase shifts along the grating length. Our numerical simulations confirm that all-optical Hilbert transformers capable of processing arbitrary optical signals with bandwidths well in the THz range can be implemented using feasible fiber/waveguide LPG designs.

Using an Adjoint Approach to Eliminate Mesh Sensitivities in Computational Design

NASA Technical Reports Server (NTRS)

Nielsen, Eric J.; Park, Michael A.

2006-01-01

An algorithm for efficiently incorporating the effects of mesh sensitivities in a computational design framework is introduced. The method is based on an adjoint approach and eliminates the need for explicit linearizations of the mesh movement scheme with respect to the geometric parameterization variables, an expense that has hindered practical large-scale design optimization using discrete adjoint methods. The effects of the mesh sensitivities can be accounted for through the solution of an adjoint problem equivalent in cost to a single mesh movement computation, followed by an explicit matrix-vector product scaling with the number of design variables and the resolution of the parameterized surface grid. The accuracy of the implementation is established and dramatic computational savings obtained using the new approach are demonstrated using several test cases. Sample design optimizations are also shown.

Using an Adjoint Approach to Eliminate Mesh Sensitivities in Computational Design

NASA Technical Reports Server (NTRS)

Nielsen, Eric J.; Park, Michael A.

2005-01-01

An algorithm for efficiently incorporating the effects of mesh sensitivities in a computational design framework is introduced. The method is based on an adjoint approach and eliminates the need for explicit linearizations of the mesh movement scheme with respect to the geometric parameterization variables, an expense that has hindered practical large-scale design optimization using discrete adjoint methods. The effects of the mesh sensitivities can be accounted for through the solution of an adjoint problem equivalent in cost to a single mesh movement computation, followed by an explicit matrix-vector product scaling with the number of design variables and the resolution of the parameterized surface grid. The accuracy of the implementation is established and dramatic computational savings obtained using the new approach are demonstrated using several test cases. Sample design optimizations are also shown.

Application of variable-gain output feedback for high-alpha control

NASA Technical Reports Server (NTRS)

Ostroff, Aaron J.

1990-01-01

A variable-gain, optimal, discrete, output feedback design approach that is applied to a nonlinear flight regime is described. The flight regime covers a wide angle-of-attack range that includes stall and post stall. The paper includes brief descriptions of the variable-gain formulation, the discrete-control structure and flight equations used to apply the design approach, and the high performance airplane model used in the application. Both linear and nonlinear analysis are shown for a longitudinal four-model design case with angles of attack of 5, 15, 35, and 60 deg. Linear and nonlinear simulations are compared for a single-point longitudinal design at 60 deg angle of attack. Nonlinear simulations for the four-model, multi-mode, variable-gain design include a longitudinal pitch-up and pitch-down maneuver and high angle-of-attack regulation during a lateral maneuver.

Design of Low-Noise Output Amplifiers for P-channel Charge-Coupled Devices Fabricated on High-Resistivity Silicon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haque, S; Frost, F Dion R.; Groulx, R

2011-12-22

We describe the design and optimization of low-noise, single-stage output amplifiers for p-channel charge-coupled devices (CCDs) used for scientific applications in astronomy and other fields. The CCDs are fabricated on high-resistivity, 4000–5000 -cm, n-type silicon substrates. Single-stage amplifiers with different output structure designs and technologies have been characterized. The standard output amplifier is designed with an n{sup +} polysilicon gate that has a metal connection to the sense node. In an effort to lower the output amplifier readout noise by minimizing the capacitance seen at the sense node, buried-contact technology has been investigated. In this case, the output transistor hasmore » a p{sup +} polysilicon gate that connects directly to the p{sup +} sense node. Output structures with buried-contact areas as small as 2 μm × 2 μm are characterized. In addition, the geometry of the source-follower transistor was varied, and we report test results on the conversion gain and noise of the various amplifier structures. By use of buried-contact technology, better amplifier geometry, optimization of the amplifier biases and improvements in the test electronics design, we obtain a 45% reduction in noise, corresponding to 1.7 e{sup -} rms at 70 kpixels/sec.« less

Experimental design of a twin-column countercurrent gradient purification process.

PubMed

Steinebach, Fabian; Ulmer, Nicole; Decker, Lara; Aumann, Lars; Morbidelli, Massimo

2017-04-07

As typical for separation processes, single unit batch chromatography exhibits a trade-off between purity and yield. The twin-column MCSGP (multi-column countercurrent solvent gradient purification) process allows alleviating such trade-offs, particularly in the case of difficult separations. In this work an efficient and reliable procedure for the design of the twin-column MCSGP process is developed. This is based on a single batch chromatogram, which is selected as the design chromatogram. The derived MCSGP operation is not intended to provide optimal performance, but it provides the target product in the selected fraction of the batch chromatogram, but with higher yield. The design procedure is illustrated for the isolation of the main charge isoform of a monoclonal antibody from Protein A eluate with ion-exchange chromatography. The main charge isoform was obtained at a purity and yield larger than 90%. At the same time process related impurities such as HCP and leached Protein A as well as aggregates were at least equally well removed. Additionally, the impact of several design parameters on the process performance in terms of purity, yield, productivity and buffer consumption is discussed. The obtained results can be used for further fine-tuning of the process parameters so as to improve its performance. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of finite element model for customized prostheses design for patient with pelvic bone tumor.

PubMed

Iqbal, Taimoor; Shi, Lei; Wang, Ling; Liu, Yaxiong; Li, Dichen; Qin, Mian; Jin, Zhongmin

2017-06-01

The aim of this study was to design a hemi-pelvic prosthesis for a patient affected by pelvic sarcoma. To investigate the biomechanical functionality of the pelvis reconstructed with designed custom-made prosthesis, a patient-specific finite element model of whole pelvis with primary ligaments inclusive was constructed based on the computed tomography images of the patient. Then, a finite element analysis was performed to calculate and compare the stress distribution between the normal and implanted pelvis models when undergoing three different static conditions-both-leg standing, single-leg standing for the healthy and the affected one. No significant differences were observed in the stresses between the normal and reconstructed pelvis for both-leg standing, but 20%-40% larger stresses were predicted for the peak stress of the single-leg standing (affected side). Moreover, two- to threefold of peak stresses were predicted within the prostheses compared to that of the normal pelvis especially for single-leg standing case, however, still below the allowable fatigue limitation. The study on the load transmission functionality of prosthesis indicated that it is crucial to carry out finite element analysis for functional evaluation of the designed customized prostheses before three-dimensional printing manufacturing, allowing better understanding of the possible peak stresses within the bone as well as the implants for safety precaution. The finite element model can be equally applicable to other bone tumor model for biomechanical studying.

Missing observations in multiyear rotation sampling designs

NASA Technical Reports Server (NTRS)

Gbur, E. E.; Sielken, R. L., Jr. (Principal Investigator)

1982-01-01

Because Multiyear estimation of at-harvest stratum crop proportions is more efficient than single year estimation, the behavior of multiyear estimators in the presence of missing acquisitions was studied. Only the (worst) case when a segment proportion cannot be estimated for the entire year is considered. The effect of these missing segments on the variance of the at-harvest stratum crop proportion estimator is considered when missing segments are not replaced, and when missing segments are replaced by segments not sampled in previous years. The principle recommendations are to replace missing segments according to some specified strategy, and to use a sequential procedure for selecting a sampling design; i.e., choose an optimal two year design and then, based on the observed two year design after segment losses have been taken into account, choose the best possible three year design having the observed two year parent design.

Design of HIFU transducers for generating specified nonlinear ultrasound fields

PubMed Central

Rosnitskiy, Pavel B.; Yuldashev, Petr V.; Sapozhnikov, Oleg A.; Maxwell, Adam; Kreider, Wayne; Bailey, Michael R.; Khokhlova, Vera A.

2016-01-01

Various clinical applications of high intensity focused ultrasound (HIFU) have different requirements for the pressure levels and degree of nonlinear waveform distortion at the focus. The goal of this work was to determine transducer design parameters that produce either a specified shock amplitude in the focal waveform or specified peak pressures while still maintaining quasilinear conditions at the focus. Multi-parametric nonlinear modeling based on the KZK equation with an equivalent source boundary condition was employed. Peak pressures, shock amplitudes at the focus, and corresponding source outputs were determined for different transducer geometries and levels of nonlinear distortion. Results are presented in terms of the parameters of an equivalent single-element, spherically shaped transducer. The accuracy of the method and its applicability to cases of strongly focused transducers were validated by comparing the KZK modeling data with measurements and nonlinear full-diffraction simulations for a single-element source and arrays with 7 and 256 elements. The results provide look-up data for evaluating nonlinear distortions at the focus of existing therapeutic systems as well as for guiding the design of new transducers that generate specified nonlinear fields. PMID:27775904

Electrical Pressurization Concept for the Orion MPCV European Service Module Propulsion System

NASA Technical Reports Server (NTRS)

Meiss, Jan-Hendrik; Weber, Jorg; Ierardo, Nicola; Quinn, Frank D.; Paisley, Jonathan

2015-01-01

The paper presents the design of the pressurization system of the European Service Module (ESM) of the Orion Multi-Purpose Crew Vehicle (MPCV). Being part of the propulsion subsystem, an electrical pressurization concept is implemented to condition propellants according to the engine needs via a bang-bang regulation system. Separate pressurization for the oxidizer and the fuel tank permits mixture ratio adjustments and prevents vapor mixing of the two hypergolic propellants during nominal operation. In case of loss of pressurization capability of a single side, the system can be converted into a common pressurization system. The regulation concept is based on evaluation of a set of tank pressure sensors and according activation of regulation valves, based on a single-failure tolerant weighting of three pressure signals. While regulation is performed on ESM level, commanding of regulation parameters as well as failure detection, isolation and recovery is performed from within the Crew Module, developed by Lockheed Martin Space System Company. The overall design and development maturity presented is post Preliminary Design Review (PDR) and reflects the current status of the MPCV ESM pressurization system.

High precision silicon piezo resistive SMART pressure sensor

NASA Astrophysics Data System (ADS)

Brown, Rod

2005-01-01

Instruments for test and calibration require a pressure sensor that is precise and stable. Market forces also dictate a move away from single measurand test equipment and, certainly in the case of pressure, away from single range equipment. A pressure `module' is required which excels in pressure measurement but is interchangble with sensors for other measurands. A communications interface for such a sensor has been specified. Instrument Digital Output Sensor (IDOS) that permits this interchanagability and allows the sensor to be inside or outside the measuring instrument. This paper covers the design and specification of a silicon diaphragm piezo resistive SMART sensor using this interface. A brief history of instrument sensors will be given to establish the background to this development. Design choices of the silicon doping, bridge energisation method, temperature sensing, signal conversion, data processing, compensation method, communications interface will be discussed. The physical format of the `in-instrument' version will be shown and then extended to the packaging design for the external version. Test results will show the accuracy achieved exceeds the target of 0.01%FS over a range of temperatures.

Design of a Hybrid Propulsion System for Orbit Raising Applications

NASA Astrophysics Data System (ADS)

Boman, N.; Ford, M.

2004-10-01

A trade off between conventional liquid apogee engines used for orbit raising applications and hybrid rocket engines (HRE) has been performed using a case study approach. Current requirements for lower cost and enhanced safety places hybrid propulsion systems in the spotlight. For evaluating and design of a hybrid rocket engine a parametric engineering code is developed, based on the combustion chamber characteristics of selected propellants. A single port cylindrical section of fuel grain is considered. Polyethylene (PE) and hydroxyl-terminated polybutadiene (HTPB) represents the fuels investigated. The engine design is optimized to minimize the propulsion system volume and mass, while keeping the system as simple as possible. It is found that the fuel grain L/D ratio boundary condition has a major impact on the overall hybrid rocket engine design.

Comparison of the Relationship between Women' Empowerment and Fertility between Single-child and Multi-child Families

PubMed Central

Saberi, Tahereh; Ehsanpour, Soheila; Mahaki, Behzad; Kohan, Shahnaz

2018-01-01

Background: The reduction in fertility and increase in the number of single-child families in Iran will result in an increased risk of population aging. One of the factors affecting fertility is women's empowerment. This study aimed to evaluate the relationship between women's empowerment and fertility in single-child and multi-child families. Materials and Methods: This case-control study was conducted among 350 women (120 who had only 1 child as case group and 230 who had 2 or more children as control group) of 15–49 years of age in Isfahan, Iran, in 2016. For data collection, a 2-part questionnaire was designed. Data were analyzed using independent t-test, Chi-square test, and logistic regression analysis. Results: The difference between average scores of women's empowerment in the case group 54.08 (9.88) and control group 51.47 (8.57) was significant (p = 0.002). Simple logistic regression analysis showed that under diploma education, compared to postgraduate education, (OR = 0.21, p = 0.001) and being a housewife, compared to being employed, (OR = 0.45, p = 0.004) decreased the odds of having only 1 child. Multiple logistic regression results showed that the relationship between women's empowerment and fertility was not significant (p = 0.265). Conclusions: Although women in single-child families were more empowered, this was not the main reason for their preference to have only 1 child. In fact, educated and employed women postpone marriage and childbearing and limit fertility to only 1 child despite their desire. PMID:29628961

Treatment of proctalgia fugax with topical nitroglycerin: report of a case.

PubMed

Lowenstein, B; Cataldo, P A

1998-05-01

We report a single case of proctalgia fugax that responded to 0.3 percent nitroglycerin ointment. Case report. A single case of proctalgia fugax responded to topical application of 0.3 percent nitro glycerin ointment with no significant side effects. Nitroglycerin ointment is a newly described treatment for several painful anal conditions. We describe a single case of levator spasm or proctalgia fugax responding to topical application of nitroglycerin. This is only a single case report, and conclusive evidence awaits completion of a controlled clinical trial.

Increasing On-Task Behavior in Every Student in a Second-Grade Classroom during Transitions: Validating the Color Wheel System

ERIC Educational Resources Information Center

Fudge, Daniel L.; Skinner, Christopher H.; Williams, Jacqueline L.; Cowden, Dan; Clark, Janice; Bliss, Stacy L.

2008-01-01

A single-case (B-C-B-C) experimental design was used to evaluate the effects of the Color Wheel classroom management system (CWS) on on-task (OT) behavior in an intact, general-education, 2nd-grade classroom during transitions. The CWS included three sets of rules, posted cues to indicate the rules students are expected to be following at that…

Effects of the Practiced Routines Parent Training Program on Behavioral Strategy Use, Parental Well-Being, and Child Challenging Behavior in Parents of Children with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Raulston, Tracy Jane

2017-01-01

In this study, a concurrent randomized multiple baseline across three parent-child dyads single-case design was employed to evaluate the effects of a brief three-week parent training program, titled Practiced Routines. The Practiced Routines parent training program included positive behavior supports (PBS) and mindfulness strategies within the…

Outcome-Based Evaluation of a Social Skills Program Using Art Therapy and Group Therapy for Children on the Autism Spectrum

ERIC Educational Resources Information Center

Epp, Kathleen Marie

2008-01-01

There is a paucity of literature on social skills therapy for students on the autism spectrum, revealing an urgent need for additional research. Past research has focused on the use of small groups or single-case study designs. The present study examines the effectiveness of a social skills therapy program for school-age children ages 11 through…

Understanding the Use of Graphic Novels to Support the Writing Skills of a Struggling Writer

ERIC Educational Resources Information Center

Voss, Christina L.

2013-01-01

This mixed methods study combining a single-subject experimental design with an embedded case study focuses on the impact of a visual treatment on the handwritten and typed output of a struggling male writer during his 5th through 7th grades who has undergone a longitudinal remedial phase of two and a half years creating text-only material as well…

Effects of the Helping Early Literacy with Practice Strategies (HELPS) on Reading Fluency with Secondary Level Students Attending an Alternative Education Program

ERIC Educational Resources Information Center

Breault, Holly

2017-01-01

The purpose of this study was to investigate the effect of the HELPS Program on the reading fluency skills of secondary level students attending an alternative education program using single case design methodology. Participants in this study included one 8th grade student and two 9th grade students attending an alternative education program in…

Delivery Time Variance Reduction in the Military Supply Chain

DTIC Science & Technology

2010-03-01

Donald Rumsfeld, designated “U.S. Transportation Command as the single Department of Defense Distribution Process Owner (DPO)” (USTRANSCOM, 2004...paragraphs explain OptQuest’s 54 functionality and capabilities as described by Laguna (1997) and Glover et al. (1999) as well as the OptQuest for ARENA...throughout the solution space ( Glover et al., 1999). Heuristics are strategies (in this case algorithms) that use different techniques and available

Impact of SenseCam on memory, identity and mood in Korsakoff's syndrome: a single case experimental design study.

PubMed

Svanberg, Jenny; Evans, Jonathan J

2014-01-01

This study aimed to investigate the impact of SenseCam, a wearable, automatic camera, on subjective mood and identity in a patient with severe memory impairment due to Korsakoff's syndrome. It was hypothesised that SenseCam would improve Ms A's mood and identity through enhancing recall of autobiographical memories of recent events, therefore supporting a coherent sense of self; the lack of which was contributing to Ms A's mood deterioration. An ABA single case experimental design investigated whether using SenseCam to record regular activities impacted on Ms A's mood and identity. Ms A experienced improved recall for events recorded using SenseCam, and showed improvement on subjective ratings of identity. However, a corresponding improvement in mood was not seen, and the study was ended early at Ms A's request. Qualitative information was gathered to explore Ms A's experience of the study, and investigate psychosocial factors that may have impacted on the use of SenseCam. SenseCam may be of significant use as a compensatory memory aid for people with Korsakoff's syndrome and other types of alcohol-related brain damage (ARBD), but acceptance of memory impairment and consistent support may be among the factors required to support the use of such assistive technologies in a community setting.

Cognitive training approaches to remediate attention and executive dysfunction after traumatic brain injury: A single-case series.

PubMed

Dymowski, Alicia Rhian; Ponsford, Jennie Louise; Willmott, Catherine

2016-10-01

Attentional deficits are common following traumatic brain injury (TBI) and interfere with daily functioning. This study employed a single-case design to examine the effects of individualised strategy training on attention beyond the effects of computerised training using Attention Process Training 3 (APT-3), and to examine the participants' subjective experience of these approaches. An ABCA (baseline, APT-3, strategy training, follow-up) design was repeated across three participants with severe TBI. Outcomes were measured on alternate versions of the oral Symbol Digit Modalities Test (SDMT) and cancellation tasks; generalisation with the Test of Everyday Attention (TEA) and self and significant other (SO) ratings on the Rating Scale of Attentional Behaviour (RSAB); and participant experiences with semi-structured interviews. Planned Tau-U analyses revealed improvements in speed of processing on the SDMT and the automatic condition of the cancellation task after APT-3 and at follow-up, but with most improvement after strategy training. Limited generalisation was evident on TEA subtests and self-RSAB ratings. SO-RSAB ratings were mixed after APT-3, but demonstrated improvement after strategy training. Variability in attentional deficits and everyday attentional requirements between patients required individualised goals and approaches to rehabilitation. This study highlights the need for individualised rehabilitation of attention to improve everyday functioning after TBI.

An introduction to modeling longitudinal data with generalized additive models: applications to single-case designs.

PubMed

Sullivan, Kristynn J; Shadish, William R; Steiner, Peter M

2015-03-01

Single-case designs (SCDs) are short time series that assess intervention effects by measuring units repeatedly over time in both the presence and absence of treatment. This article introduces a statistical technique for analyzing SCD data that has not been much used in psychological and educational research: generalized additive models (GAMs). In parametric regression, the researcher must choose a functional form to impose on the data, for example, that trend over time is linear. GAMs reverse this process by letting the data inform the choice of functional form. In this article we review the problem that trend poses in SCDs, discuss how current SCD analytic methods approach trend, describe GAMs as a possible solution, suggest a GAM model testing procedure for examining the presence of trend in SCDs, present a small simulation to show the statistical properties of GAMs, and illustrate the procedure on 3 examples of different lengths. Results suggest that GAMs may be very useful both as a form of sensitivity analysis for checking the plausibility of assumptions about trend and as a primary data analysis strategy for testing treatment effects. We conclude with a discussion of some problems with GAMs and some future directions for research on the application of GAMs to SCDs. (c) 2015 APA, all rights reserved).