Progress in mask replication using jet and flash imprint lithography

NASA Astrophysics Data System (ADS)

Selinidis, Kosta S.; Brooks, Cynthia B.; Doyle, Gary F.; Brown, Laura; Jones, Chris; Imhof, Joseph; LaBrake, Dwayne L.; Resnick, Douglas J.; Sreenivasan, S. V.

2011-04-01

The Jet and Flash Imprint Lithography (J-FILTM) process uses drop dispensing of UV curable resists to assist high resolution patterning for subsequent dry etch pattern transfer. The technology is actively being used to develop solutions for memory markets including Flash memory and patterned media for hard disk drives. It is anticipated that the lifetime of a single template (for patterned media) or mask (for semiconductor) will be on the order of 104 - 105imprints. This suggests that tens of thousands of templates/masks will be required to satisfy the needs of a manufacturing environment. Electron-beam patterning is too slow to feasibly deliver these volumes, but instead can provide a high quality "master" mask which can be replicated many times with an imprint lithography tool. This strategy has the capability to produce the required supply of "working" templates/masks. In this paper, we review the development of the mask form factor, imprint replication tools and processes specifically for semiconductor applications. The requirements needed for semiconductors dictate the need for a well defined form factor for both master and replica masks which is also compatible with the existing mask infrastructure established for the 6025 semi standard, 6" x 6" x 0.25" photomasks. Complying with this standard provides the necessary tooling needed for mask fabrication processes, cleaning, metrology, and inspection. The replica form factor has additional features specific to imprinting such as a pre-patterned mesa. A PerfectaTM MR5000 mask replication tool has been developed specifically to pattern replica masks from an e-beam written master. The system specifications include a throughput of four replicas per hour with an added image placement component of 5nm, 3sigma and a critical dimension uniformity error of less than 1nm, 3sigma. A new process has been developed to fabricate replicas with high contrast alignment marks so that designs for imprint can fit within current device layouts and maximize the usable printed area on the wafer. Initial performance results of this marks are comparable to the baseline fused silica align marks.

Directed self-assembly of high-chi block copolymer for nano fabrication of bit patterned media via solvent annealing

NASA Astrophysics Data System (ADS)

Xiong, Shisheng; Chapuis, Yves-Andre; Wan, Lei; Gao, He; Li, Xiao; Ruiz, Ricardo; Nealey, Paul F.

2016-10-01

We report the formation of nanoimprint master templates that can be used for the fabrication of bit patterned media (BPM). The template was formed by directed self-assembly, with solvent annealing, of a symmetric ABA triblock copolymer to form perpendicularly oriented lamellae on chemical patterns. We used a high-χ block copolymer, poly(2-vinyl pyridine)-block-polystyrene-block-poly(2-vinyl pyridine) to achieve smaller feature sizes than are possible with polystyrene-block-poly(methyl methacrylate). The work shows that triblock copolymers can provide a large processing window in terms of pitch commensurability. Using block-selective infiltration (atomic layer deposition with sequential long soaking/purge cycles), an alumina composite with high etch resistance was specifically incorporated into the polar and hydrophilic P2VP domains. Subsequently, the surface pattern was successfully transferred into underlying Si substrates by etching with a fluorine-containing plasma to create a nanoimprint master. The line/space pattern of the nanoimprint master met the BPM fabrication requirement of defectivity <10-3. For demonstration purposes, the nanoimprint master was used to imprint a replica pattern of photoresist on a quartz wafer.

CT protocol management: simplifying the process by using a master protocol concept.

PubMed

Szczykutowicz, Timothy P; Bour, Robert K; Rubert, Nicholas; Wendt, Gary; Pozniak, Myron; Ranallo, Frank N

2015-07-08

This article explains a method for creating CT protocols for a wide range of patient body sizes and clinical indications, using detailed tube current information from a small set of commonly used protocols. Analytical expressions were created relating CT technical acquisition parameters which can be used to create new CT protocols on a given scanner or customize protocols from one scanner to another. Plots of mA as a function of patient size for specific anatomical regions were generated and used to identify the tube output needs for patients as a function of size for a single master protocol. Tube output data were obtained from the DICOM header of clinical images from our PACS and patient size was measured from CT localizer radiographs under IRB approval. This master protocol was then used to create 11 additional master protocols. The 12 master protocols were further combined to create 39 single and multiphase clinical protocols. Radiologist acceptance rate of exams scanned using the clinical protocols was monitored for 12,857 patients to analyze the effectiveness of the presented protocol management methods using a two-tailed Fisher's exact test. A single routine adult abdominal protocol was used as the master protocol to create 11 additional master abdominal protocols of varying dose and beam energy. Situations in which the maximum tube current would have been exceeded are presented, and the trade-offs between increasing the effective tube output via 1) decreasing pitch, 2) increasing the scan time, or 3) increasing the kV are discussed. Out of 12 master protocols customized across three different scanners, only one had a statistically significant acceptance rate that differed from the scanner it was customized from. The difference, however, was only 1% and was judged to be negligible. All other master protocols differed in acceptance rate insignificantly between scanners. The methodology described in this paper allows a small set of master protocols to be adapted among different clinical indications on a single scanner and among different CT scanners.

System and method for merging clusters of wireless nodes in a wireless network

DOEpatents

Budampati, Ramakrishna S [Maple Grove, MN; Gonia, Patrick S [Maplewood, MN; Kolavennu, Soumitri N [Blaine, MN; Mahasenan, Arun V [Kerala, IN

2012-05-29

A system includes a first cluster having multiple first wireless nodes. One first node is configured to act as a first cluster master, and other first nodes are configured to receive time synchronization information provided by the first cluster master. The system also includes a second cluster having one or more second wireless nodes. One second node is configured to act as a second cluster master, and any other second nodes configured to receive time synchronization information provided by the second cluster master. The system further includes a manager configured to merge the clusters into a combined cluster. One of the nodes is configured to act as a single cluster master for the combined cluster, and the other nodes are configured to receive time synchronization information provided by the single cluster master.

Improvement of sub-20nm pattern quality with dose modulation technique for NIL template production

NASA Astrophysics Data System (ADS)

Yagawa, Keisuke; Ugajin, Kunihiro; Suenaga, Machiko; Kanamitsu, Shingo; Motokawa, Takeharu; Hagihara, Kazuki; Arisawa, Yukiyasu; Kobayashi, Sachiko; Saito, Masato; Ito, Masamitsu

2016-04-01

Nanoimprint lithography (NIL) technology is in the spotlight as a next-generation semiconductor manufacturing technique for integrated circuits at 22 nm and beyond. NIL is the unmagnified lithography technique using template which is replicated from master templates. On the other hand, master templates are currently fabricated by electron-beam (EB) lithography[1]. In near future, finer patterns less than 15nm will be required on master template and EB data volume increases exponentially. So, we confront with a difficult challenge. A higher resolution EB mask writer and a high performance fabrication process will be required. In our previous study, we investigated a potential of photomask fabrication process for finer patterning and achieved 15.5nm line and space (L/S) pattern on template by using VSB (Variable Shaped Beam) type EB mask writer and chemically amplified resist. In contrast, we found that a contrast loss by backscattering decreases the performance of finer patterning. For semiconductor devices manufacturing, we must fabricate complicated patterns which includes high and low density simultaneously except for consecutive L/S pattern. Then it's quite important to develop a technique to make various size or coverage patterns all at once. In this study, a small feature pattern was experimentally formed on master template with dose modulation technique. This technique makes it possible to apply the appropriate exposure dose for each pattern size. As a result, we succeed to improve the performance of finer patterning in bright field area. These results show that the performance of current EB lithography process have a potential to fabricate NIL template.

Master plot analysis of microcracking in graphite/epoxy and graphite/PEEK laminates

NASA Technical Reports Server (NTRS)

Nairn, John A.; Hu, Shoufeng; Bark, Jong Song

1993-01-01

We used a variational stress analysis and an energy release rate failure criterion to construct a master plot analysis of matrix microcracking. In the master plot, the results for all laminates of a single material are predicted to fall on a single line whose slope gives the microcracking toughness of the material. Experimental results from 18 different layups of AS4/3501-6 laminates show that the master plot analysis can explain all observations. In particular, it can explain the differences between microcracking of central 90 deg plies and of free-surface 90 deg plies. Experimental results from two different AS4/PEEK laminates tested at different temperatures can be explained by a modified master plot that accounts for changes in the residual thermal stresses. Finally, we constructed similar master plot analyses for previous literature microcracking models. All microcracking theories that ignore the thickness dependence of the stresses gave poor results.

Joint demosaicking and zooming using moderate spectral correlation and consistent edge map

NASA Astrophysics Data System (ADS)

Zhou, Dengwen; Dong, Weiming; Chen, Wengang

2014-07-01

The recently published joint demosaicking and zooming algorithms for single-sensor digital cameras all overfit the popular Kodak test images, which have been found to have higher spectral correlation than typical color images. Their performance perhaps significantly degrades on other datasets, such as the McMaster test images, which have weak spectral correlation. A new joint demosaicking and zooming algorithm is proposed for the Bayer color filter array (CFA) pattern, in which the edge direction information (edge map) extracted from the raw CFA data is consistently used in demosaicking and zooming. It also moderately utilizes the spectral correlation between color planes. The experimental results confirm that the proposed algorithm produces an excellent performance on both the Kodak and McMaster datasets in terms of both subjective and objective measures. Our algorithm also has high computational efficiency. It provides a better tradeoff among adaptability, performance, and computational cost compared to the existing algorithms.

Adolescents' Self-Regulation Development via the Sensory Room System

ERIC Educational Resources Information Center

Kalimullin, Aydar M.; Kuvaldina, Elana A.; Koinova-Zoellner, Julia

2016-01-01

The urgency of the issue stated in this article is caused by the need for mastering skills and patterns of self-regulation when being an adolescent since this time is sensitive for developing processes of personal understanding and evolution. Thus, mastering skills and patterns of self-regulation as a necessary part of the whole ability of…

Unidirectionally aligned line patterns driven by entropic effects on faceted surfaces

PubMed Central

Hong, Sung Woo; Huh, June; Gu, Xiaodan; Lee, Dong Hyun; Jo, Won Ho; Park, Soojin; Xu, Ting; Russell, Thomas P.

2012-01-01

A simple, versatile approach to the directed self-assembly of block copolymers into a macroscopic array of unidirectionally aligned cylindrical microdomains on reconstructed faceted single crystal surfaces or on flexible, inexpensive polymeric replicas was discovered. High fidelity transfer of the line pattern generated from the microdomains to a master mold is also shown. A single-grained line patterns over arbitrarily large surface areas without the use of top-down techniques is demonstrated, which has an order parameter typically in excess of 0.97 and a slope error of 1.1 deg. This degree of perfection, produced in a short time period, has yet to be achieved by any other methods. The exceptional alignment arises from entropic penalties of chain packing in the facets coupled with the bending modulus of the cylindrical microdomains. This is shown, theoretically, to be the lowest energy state. The atomic crystalline ordering of the substrate is transferred, over multiple length scales, to the block copolymer microdomains, opening avenues to large-scale roll-to-roll type and nanoimprint processing of perfectly patterned surfaces and as templates and scaffolds for magnetic storage media, polarizing devices, and nanowire arrays. PMID:22307591

CT protocol management: simplifying the process by using a master protocol concept

PubMed Central

Bour, Robert K.; Rubert, Nicholas; Wendt, Gary; Pozniak, Myron; Ranallo, Frank N.

2015-01-01

This article explains a method for creating CT protocols for a wide range of patient body sizes and clinical indications, using detailed tube current information from a small set of commonly used protocols. Analytical expressions were created relating CT technical acquisition parameters which can be used to create new CT protocols on a given scanner or customize protocols from one scanner to another. Plots of mA as a function of patient size for specific anatomical regions were generated and used to identify the tube output needs for patients as a function of size for a single master protocol. Tube output data were obtained from the DICOM header of clinical images from our PACS and patient size was measured from CT localizer radiographs under IRB approval. This master protocol was then used to create 11 additional master protocols. The 12 master protocols were further combined to create 39 single and multiphase clinical protocols. Radiologist acceptance rate of exams scanned using the clinical protocols was monitored for 12,857 patients to analyze the effectiveness of the presented protocol management methods using a two‐tailed Fisher's exact test. A single routine adult abdominal protocol was used as the master protocol to create 11 additional master abdominal protocols of varying dose and beam energy. Situations in which the maximum tube current would have been exceeded are presented, and the trade‐offs between increasing the effective tube output via 1) decreasing pitch, 2) increasing the scan time, or 3) increasing the kV are discussed. Out of 12 master protocols customized across three different scanners, only one had a statistically significant acceptance rate that differed from the scanner it was customized from. The difference, however, was only 1% and was judged to be negligible. All other master protocols differed in acceptance rate insignificantly between scanners. The methodology described in this paper allows a small set of master protocols to be adapted among different clinical indications on a single scanner and among different CT scanners. PACS number: 87.57.Q PMID:26219005

7 CFR 43.104 - Master table of single and double sampling plans.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Master table of single and double sampling plans. 43.104 Section 43.104 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND...

Integrated injection-locked semiconductor diode laser

DOEpatents

Hadley, G. Ronald; Hohimer, John P.; Owyoung, Adelbert

1991-01-01

A continuous wave integrated injection-locked high-power diode laser array is provided with an on-chip independently-controlled master laser. The integrated injection locked high-power diode laser array is capable of continuous wave lasing in a single near-diffraction limited output beam at single-facet power levels up to 125 mW (250 mW total). Electronic steering of the array emission over an angle of 0.5 degrees is obtained by varying current to the master laser. The master laser injects a laser beam into the slave array by reflection of a rear facet.

Electrochemical deposition onto self-assembled monolayers: new insights into micro- and nanofabrication.

PubMed

Schilardi, Patricia L; Dip, Patricio; dos Santos Claro, Paula C; Benítez, Guillermo A; Fonticelli, Mariano H; Azzaroni, Omar; Salvarezza, Roberto C

2005-12-16

Pattern transfer with high resolution is a frontier topic in the emerging field of nanotechnologies. Electrochemical molding is a possible route for nanopatterning metal, alloys and oxide surfaces with high resolution in a simple and inexpensive way. This method involves electrodeposition onto a conducting master covered by a self-assembled alkanethiolate monolayer (SAMs). This molecular film enables direct surface-relief pattern transfer from the conducting master to the inner face of the electrodeposit, and also allows an easy release of the electrodeposited film due their excellent anti-adherent properties. Replicas of the original conductive master can be also obtained by a simple two-step procedure. SAM quality and stability under electrodeposition conditions combined with the formation of smooth electrodeposits are crucial to obtain high-quality pattern transfer with sub-50 nm resolution.

Experiments towards establishing of design rules for R2R-UV-NIL with polymer working shims

NASA Astrophysics Data System (ADS)

Nees, Dieter; Ruttloff, Stephan; Palfinger, Ursula; Stadlober, Barbara

2016-03-01

Roll-to-Roll-UV-nanoimprint lithography (R2R-UV-NIL) enables high resolution large area patterning of flexible substrates and is therefore of increasing industrial interest. We have set up a custom-made R2R-UV-NIL pilot machine which is able to convert 10 inch wide web with velocities of up to 30 m/min. In addition, we have developed self-replicable UV-curable resins with tunable surface energy and Young's modulus for UV-imprint material as well as for polymer working stamp/shim manufacturing. Now we have designed test patterns for the evaluation of the impact of structure shape, critical dimension, pitch, depth, side wall angle and orientation relative to the web movement onto the imprint fidelity and working shim life time. We have used female (recessed structures) silicon masters of that design with critical dimensions between CD = 200 nm and 1600 nm, and structure depths of d = 500 nm and 1000 nm - all with vertical as well as inclined side walls. These entire master patterns have been transferred onto single male (protruding structures) R2R polymer working shims. The polymer working shims have been used for R2R-UV-NIL runs of several hundred meters and the imprint fidelity and process stability of the various test patterns have been compared. This study is intended as a first step towards establishing of design rules and developing of nanoimprint proximity correction strategies for industrial R2R-UV-NIL processes using polymer working shims.

Single transmission line data acquisition system

DOEpatents

Fasching, George E.

1984-01-01

A single transmission line interrogated multiple channel data acquisition system is provided in which a plurality of remote station/sensors monitor specific process variables and transmit measurement values over the single transmission line to a master station when addressed by the master station. Power for all remote stations (up to 980) is provided by driving the line with constant voltage supplied from the master station and automatically maintained independent of the number of remote stations directly connected to the line. The transmission line can be an RG-62 coaxial cable with lengths up to about 10,000 feet with branches up to 500 feet. The remote stations can be attached randomly along the line. The remote stations can be scanned at rates up to 980 channels/second.

Training of Masters in Philology in Ukraine and Abroad: Search for Educational Strategies

ERIC Educational Resources Information Center

Semenog, Olena

2015-01-01

The paper outlines the modernization experience of philology Master programs in Ukraine, the USA, Poland and Russia. It has been proved that the Masters' training is on the search educational strategies phase, which allows to form a single educational space on the principles of internationalization, institutionalization, integration, cultural…

Single master regulatory gene coordinates the evolution and development of butterfly color and iridescence

PubMed Central

Zhang, Linlin

2017-01-01

The optix gene has been implicated in butterfly wing pattern adaptation by genetic association, mapping, and expression studies. The actual developmental function of this gene has remained unclear, however. Here we used CRISPR/Cas9 genome editing to show that optix plays a fundamental role in nymphalid butterfly wing pattern development, where it is required for determination of all chromatic coloration. optix knockouts in four species show complete replacement of color pigments with melanins, with corresponding changes in pigment-related gene expression, resulting in black and gray butterflies. We also show that optix simultaneously acts as a switch gene for blue structural iridescence in some butterflies, demonstrating simple regulatory coordination of structural and pigmentary coloration. Remarkably, these optix knockouts phenocopy the recurring “black and blue” wing pattern archetype that has arisen on many independent occasions in butterflies. Here we demonstrate a simple genetic basis for structural coloration, and show that optix plays a deeply conserved role in butterfly wing pattern development. PMID:28923944

Single master regulatory gene coordinates the evolution and development of butterfly color and iridescence.

PubMed

Zhang, Linlin; Mazo-Vargas, Anyi; Reed, Robert D

2017-10-03

The optix gene has been implicated in butterfly wing pattern adaptation by genetic association, mapping, and expression studies. The actual developmental function of this gene has remained unclear, however. Here we used CRISPR/Cas9 genome editing to show that optix plays a fundamental role in nymphalid butterfly wing pattern development, where it is required for determination of all chromatic coloration. optix knockouts in four species show complete replacement of color pigments with melanins, with corresponding changes in pigment-related gene expression, resulting in black and gray butterflies. We also show that optix simultaneously acts as a switch gene for blue structural iridescence in some butterflies, demonstrating simple regulatory coordination of structural and pigmentary coloration. Remarkably, these optix knockouts phenocopy the recurring "black and blue" wing pattern archetype that has arisen on many independent occasions in butterflies. Here we demonstrate a simple genetic basis for structural coloration, and show that optix plays a deeply conserved role in butterfly wing pattern development.

Integrated injection-locked semiconductor diode laser

DOEpatents

Hadley, G.R.; Hohimer, J.P.; Owyoung, A.

1991-02-19

A continuous wave integrated injection-locked high-power diode laser array is provided with an on-chip independently-controlled master laser. The integrated injection locked high-power diode laser array is capable of continuous wave lasing in a single near-diffraction limited output beam at single-facet power levels up to 125 mW (250 mW total). Electronic steering of the array emission over an angle of 0.5 degrees is obtained by varying current to the master laser. The master laser injects a laser beam into the slave array by reflection of a rear facet. 18 figures.

1645-nm single-frequency, injection-seeded Q-switched Er:YAG master oscillator and power amplifier

NASA Astrophysics Data System (ADS)

Wang, Shuo; Gao, Chunqing; Shi, Yang; Song, Rui; Na, Quanxin; Gao, Mingwei; Wang, Qing

2018-02-01

A 1645-nm injection-seeded Q-switched Er:YAG master oscillator and power amplifier system is reported. The master oscillator generates single-frequency pulse energy of 11.10 mJ with a pulse width of 188.8 ns at 200 Hz. An Er:YAG monolithic nonplanar ring oscillator is employed as a seed laser. The output pulse from the master oscillator is amplified to 14.33-mJ pulse energy through an Er:YAG amplifier, with a pulse width of 183.3 ns. The M2-factors behind the amplifier are 1.14 and 1.23 in x- and y-directions, respectively. The full width at half maximum of the fast Fourier transformation spectrum of the heterodyne beating signal is 2.84 MHz.

Application and Reliability of the Retrospective Interview Procedure to Trace Physical Activity Patterns in Master Athletes and Nonactive Older Adults

ERIC Educational Resources Information Center

MacDonald, Dany J.; Horton, Sean; Kraemer, Krista; Weir, Patricia; Deakin, Janice M.; Cote, Jean

2009-01-01

This paper reports the results of two studies. The purpose of the first study was to determine if lifestyle variables and past involvement in physical activity was related to current activity levels in master athletes and sedentary older adults. Retrospective interviews were conducted with 12 master athletes and 12 sedentary older adults. Results…

Single transmission line interrogated multiple channel data acquisition system

DOEpatents

Fasching, George E.; Keech, Jr., Thomas W.

1980-01-01

A single transmission line interrogated multiple channel data acquisition system is provided in which a plurality of remote station/sensor circuits each monitors a specific process variable and each transmits measurement values over a single transmission line to a master interrogating station when addressed by said master interrogating station. Typically, as many as 330 remote stations may be parallel connected to the transmission line which may exceed 7,000 feet. The interrogation rate is typically 330 stations/second. The master interrogating station samples each station according to a shared, charging transmit-receive cycle. All remote station address signals, all data signals from the remote stations/sensors and all power for all of the remote station/sensors are transmitted via a single continuous terminated coaxial cable. A means is provided for periodically and remotely calibrating all remote sensors for zero and span. A provision is available to remotely disconnect any selected sensor station from the main transmission line.

76 FR 3209 - West Los Angeles VA Medical Center Veterans Programs Enhancement Act of 1998; Draft Master Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-19

... Federal Register Notice announces an opportunity for public comment on the West Los Angeles (WLA... to ``Notice: Draft Master Plan.'' All comments received will be available for public inspection in...-recurring filming and single-day event agreements. The purpose of the Draft Master Plan is to satisfy the...

An all-joint-control master device for single-port laparoscopic surgery robots.

PubMed

Shim, Seongbo; Kang, Taehun; Ji, Daekeun; Choi, Hyunseok; Joung, Sanghyun; Hong, Jaesung

2016-08-01

Robots for single-port laparoscopic surgery (SPLS) typically have all of their joints located inside abdomen during surgery, whereas with the da Vinci system, only the tip part of the robot arm is inserted and manipulated. A typical master device that controls only the tip with six degrees of freedom (DOFs) is not suitable for use with SPLS robots because of safety concerns. We designed an ergonomic six-DOF master device that can control all of the joints of an SPLS robot. We matched each joint of the master, the slave, and the human arm to decouple all-joint motions of the slave robot. Counterbalance masses were used to reduce operator fatigue. Mapping factors were determined based on kinematic analysis and were used to achieve all-joint control with minimal error at the tip of the slave robot. The proposed master device has two noteworthy features: efficient joint matching to the human arm to decouple each joint motion of the slave robot and accurate mapping factors, which can minimize the trajectory error of the tips between the master and the slave. We confirmed that the operator can manipulate the slave robot intuitively with the master device and that both tips have similar trajectories with minimal error.

Single step sequential polydimethylsiloxane wet etching to fabricate a microfluidic channel with various cross-sectional geometries

NASA Astrophysics Data System (ADS)

Wang, C.-K.; Liao, W.-H.; Wu, H.-M.; Lo, Y.-H.; Lin, T.-R.; Tung, Y.-C.

2017-11-01

Polydimethylsiloxane (PDMS) has become a widely used material to construct microfluidic devices for various biomedical and chemical applications due to its desirable material properties and manufacturability. PDMS microfluidic devices are usually fabricated using soft lithography replica molding methods with master molds made of photolithogrpahy patterned photoresist layers on silicon wafers. The fabricated microfluidic channels often have rectangular cross-sectional geometries with single or multiple heights. In this paper, we develop a single step sequential PDMS wet etching process that can be used to fabricate microfluidic channels with various cross-sectional geometries from single-layer PDMS microfluidic channels. The cross-sections of the fabricated channel can be non-rectangular, and varied along the flow direction. Furthermore, the fabricated cross-sectional geometries can be numerically simulated beforehand. In the experiments, we fabricate microfluidic channels with various cross-sectional geometries using the developed technique. In addition, we fabricate a microfluidic mixer with alternative mirrored cross-sectional geometries along the flow direction to demonstrate the practical usage of the developed technique.

Master/slave clock arrangement for providing reliable clock signal

NASA Technical Reports Server (NTRS)

Abbey, Duane L. (Inventor)

1977-01-01

The outputs of two like frequency oscillators are combined to form a single reliable clock signal, with one oscillator functioning as a slave under the control of the other to achieve phase coincidence when the master is operative and in a free-running mode when the master is inoperative so that failure of either oscillator produces no effect on the clock signal.

Fast in-situ tool inspection based on inverse fringe projection and compact sensor heads

NASA Astrophysics Data System (ADS)

Matthias, Steffen; Kästner, Markus; Reithmeier, Eduard

2016-11-01

Inspection of machine elements is an important task in production processes in order to ensure the quality of produced parts and to gather feedback for the continuous improvement process. A new measuring system is presented, which is capable of performing the inspection of critical tool geometries, such as gearing elements, inside the forming machine. To meet the constraints on sensor head size and inspection time imposed by the limited space inside the machine and the cycle time of the process, the measuring device employs a combination of endoscopy techniques with the fringe projection principle. Compact gradient index lenses enable a compact design of the sensor head, which is connected to a CMOS camera and a flexible micro-mirror based projector via flexible fiber bundles. Using common fringe projection patterns, the system achieves measuring times of less than five seconds. To further reduce the time required for inspection, the generation of inverse fringe projection patterns has been implemented for the system. Inverse fringe projection speeds up the inspection process by employing object-adapted patterns, which enable the detection of geometry deviations in a single image. Two different approaches to generate object adapted patterns are presented. The first approach uses a reference measurement of a manufactured tool master to generate the inverse pattern. The second approach is based on a virtual master geometry in the form of a CAD file and a ray-tracing model of the measuring system. Virtual modeling of the measuring device and inspection setup allows for geometric tolerancing for free-form surfaces by the tool designer in the CAD-file. A new approach is presented, which uses virtual tolerance specifications and additional simulation steps to enable fast checking of metric tolerances. Following the description of the pattern generation process, the image processing steps required for inspection are demonstrated on captures of gearing geometries.

Development of template and mask replication using jet and flash imprint lithography

NASA Astrophysics Data System (ADS)

Brooks, Cynthia; Selinidis, Kosta; Doyle, Gary; Brown, Laura; LaBrake, Dwayne; Resnick, Douglas J.; Sreenivasan, S. V.

2010-09-01

The Jet and Flash Imprint Lithography (J-FILTM)1-7 process uses drop dispensing of UV curable resists to assist high resolution patterning for subsequent dry etch pattern transfer. The technology is actively being used to develop solutions for memory markets including Flash memory and patterned media for hard disk drives. It is anticipated that the lifetime of a single template (for patterned media) or mask (for semiconductor) will be on the order of 104 - 105 imprints. This suggests that tens of thousands of templates/masks will be required. It is not feasible to employ electronbeam patterning directly to deliver these volumes. Instead, a "master" template - created by directly patterning with an electron-beam tool - will be replicated many times with an imprint lithography tool to produce the required supply of "working" templates/masks. In this paper, we review the development of the pattern transfer process for both template and mask replicas. Pattern transfer of resolutions down to 25nm has been demonstrated for bit patterned media replication. In addition, final resolution on a semiconductor mask of 28nm has been confirmed. The early results on both etch depth and CD uniformity are promising, but more extensive work is required to characterize the pattern transfer process.

FACILITY 713, HALLWAY LOOKING TOWARDS MASTER BEDROOM END, VIEW FACING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FACILITY 713, HALLWAY LOOKING TOWARDS MASTER BEDROOM END, VIEW FACING NORTH. - Schofield Barracks Military Reservation, Central-Entry Single-Family Housing Type, Between Bragg & Grime Streets near Ayres Avenue, Wahiawa, Honolulu County, HI

Preparation of Al-La Master Alloy by Thermite Reaction in NaF-NaCl-KCl Molten Salt

NASA Astrophysics Data System (ADS)

Jang, Poknam; Li, Hyonmo; Kim, Wenjae; Wang, Zhaowen; Liu, Fengguo

2015-05-01

A NaF-NaCl-KCl ternary system containing La2O3 was investigated for the preparation of Al-La master alloy by the thermite reaction method. The solubility of La2O3 in NaF-NaCl-KCl molten salt was determined by the method of isothermal solution saturation. Inductively coupled plasma-optical emission spectroscopy and x-ray diffraction (XRD) analyses were used to consider the content of La2O3 in molten salt and the supernatant composition of molten salt after dissolution of La2O3, respectively. The results showed that the content of NaF had a positive influence on the solubility of La2O3 in NaF-NaCl-KCl molten salts, and the solubility of La2O3 could reach 8.71 wt.% in molten salts of 50 wt.%NaF-50 wt.% (44 wt.%NaCl + 56 wt.%KCl). The XRD pattern of cooling molten salt indicated the formation of LaOF in molten salt, which was probably obtained by the reaction between NaF and La2O3. The kinetic study showed that the thermite reaction was in accord with a first-order reaction model. The main influence factors on La content in the Al-La master alloy product, including molten salt composition, amount of Al, concentration of La2O3, stirring, reduction time and temperature, were investigated by single-factor experimentation. The content of La in the Al-La master alloy could be reached to 10.1 wt.%.

More Lessons from a Master Teacher! Frank Wachowiak.

ERIC Educational Resources Information Center

Morris, Jimmy

1989-01-01

Presents two printmaking lessons for children inspired by master art teacher, Frank Wachowiak. "Repeated Motifs and Designs" uses vegetables and found objects to make prints emphasizing repeat patterns. "Fish Under the Sea" uses white liquid glue to make line prints with strong linear compositions. (LS)

Plastic masters-rigid templates for soft lithography.

PubMed

Desai, Salil P; Freeman, Dennis M; Voldman, Joel

2009-06-07

We demonstrate a simple process for the fabrication of rigid plastic master molds for soft lithography directly from (poly)dimethysiloxane devices. Plastics masters (PMs) provide a cost-effective alternative to silicon-based masters and can be easily replicated without the need for cleanroom facilities. We have successfully demonstrated the use of plastics micromolding to generate both single and dual-layer plastic structures, and have characterized the fidelity of the molding process. Using the PM fabrication technique, world-to-chip connections can be integrated directly into the master enabling devices with robust, well-aligned fluidic ports directly after molding. PMs provide an easy technique for the fabrication of microfluidic devices and a simple route for the scaling-up of fabrication of robust masters for soft lithography.

New approach for producing chemical templates over large area by Molecular Transfer Printing

NASA Astrophysics Data System (ADS)

Inoue, Takejiro; Janes, Dustin; Ren, Jiaxing; Willson, Grant; Ellison, Christopher; Nealey, Paul

2014-03-01

Fabrication of well-defined chemically patterned surfaces is crucially important to the development of next generation microprocessors, hard disk memory devices, photonic/plasmonic devices, separation membranes, and biological microarrays. One promising patterning method in these fields is Molecular Transfer Printing (MTP), which replicates chemical patterns with feature dimensions of the order of 10nm utilizing a master template defined by the microphase separated domains of a block copolymer thin film. The total transfer printing area achievable by MTP has so far been limited by the contact area between two rigid substrates. Therefore, strategies to make conformal contact between substrates could be practically useful because a single lithographically-defined starting pattern could be used to fabricate many replicates by a low-cost process. Here we show a new approach that utilizes a chemically deposited SiN layer and a liquid conformal layer to enable transfer printing of chemical patterns upon thermal annealing over large, continuous areas. We anticipate that our process could be integrated into Step and Flash Imprint Lithography (SFIL) tools to achieve conformal layer thicknesses thin and uniform enough to permit pattern transfer through a dry-etch protocol.

Tunable microwave generation of a monolithic dual-wavelength distributed feedback laser.

PubMed

Lo, Yen-Hua; Wu, Yu-Chang; Hsu, Shun-Chieh; Hwang, Yi-Chia; Chen, Bai-Ci; Lin, Chien-Chung

2014-06-02

The dynamic behavior of a monolithic dual-wavelength distributed feedback laser was fully investigated and mapped. The combination of different driving currents for master and slave lasers can generate a wide range of different operational modes, from single mode, period 1 to chaos. Both the optical and microwave spectrum were recorded and analyzed. The detected single mode signal can continuously cover from 15GHz to 50GHz, limited by photodetector bandwidth. The measured optical four-wave-mixing pattern indicates that a 70GHz signal can be generated by this device. By applying rate equation analysis, the important laser parameters can be extracted from the spectrum. The extracted relaxation resonant frequency is found to be 8.96GHz. With the full operational map at hand, the suitable current combination can be applied to the device for proper applications.

Cold-development tool and technique for the ultimate resolution of ZEP520A to fabricate an EB master mold for nano-imprint lithography for 1Tbit/inch2 BPM development

NASA Astrophysics Data System (ADS)

Kobayashi, Hideo; Iyama, Hiromasa; Kagatsume, Takeshi; Watanabe, Tsuyoshi

2012-11-01

Cold-development is well-known for resolution enhancement on ZEP520A. Dipping a wafer in a developer solvent chilled by a freezer, such a typical method had been employed. But, it is obvious that the dip-development method has several inferiorities such as developer temperature instability, temperature inconsistency between developer and a wafer, water-condensation on drying. We then built a single wafer spin-develop tool, and established a process sequence, to solve those difficulties. And, we tried to see their effect down to -10degC over various developers. In specific, we tried to make hole patterns in hexagonal closest packing in 40nm, 35nm, 30nm, 25nm pitch, and examined holes pattern quality and resolution limit by varying setting temperature from room temperature to -10degC in the cold-development, as well as varying developer chemistry from the standard developer ZED N-50 (n-amyl acetate, 100%) to MiBK and IPA mixture which was a rinsing solvent mixture originally. We also examined the other developer (poor solvent mixture) we designed, N-50 and fluorocarbon (FC) mixture, MiBK and FC mixture, and IPA+FC mixture. This paper describes cold-development tool and technique, and its results down to minus (-) 10degC, for ZEP520A resolution enhancement to obtain 1Xnm bits (holes) in 25nm pitch to fabricate an EB master mold for Nano-Imprinting Lithography for 1Tbit/in2 bit patterned media (BPM) in HDD development and production.

Performance Comparison of Al-Ti Master Alloys with Different Microstructures in Grain Refinement of Commercial Purity Aluminum.

PubMed

Ding, Wanwu; Xia, Tiandong; Zhao, Wenjun

2014-05-07

Three types of Al-5Ti master alloys were synthesized by a method of thermal explosion reaction in pure molten aluminum. Performance comparison of Al-5Ti master alloy in grain refinement of commercial purity Al with different additions (0.6%, 1.0%, 1.6%, 2.0%, and 3.0%) and holding time (10, 30, 60 and 120 min) were investigated. The results show that Al-5Ti master alloy with blocky TiAl₃ particles clearly has better refining efficiency than the master alloy with mixed TiAl₃ particles and the master alloy with needle-like TiAl₃ particles. The structures of master alloys, differing by sizes, morphologies and quantities of TiAl₃ crystals, were found to affect the pattern of the grain refining properties with the holding time. The grain refinement effect was revealed to reduce markedly for master alloys with needle-like TiAl₃ crystals and to show the further significant improvement at a longer holding time for the master alloy containing both larger needle-like and blocky TiAl₃ particles. For the master alloy with finer blocky particles, the grain refining effect did not obviously decrease during the whole studied range of the holding time.

Financial Aid, Persistence, and Degree Completion in Masters Degree Programs.

ERIC Educational Resources Information Center

Luan, Jing; Fenske, Robert H.

1996-01-01

A study at Arizona State University investigated the relationships between types and amounts of student financial aid, student demographic and academic characteristics, persistence, and degree completion among 472 master's program students over a 4-year period from fall 1985 through summer 1989. Variables found to affect patterns included economic…

MASTER BEDROOM. VIEW FACING NORTH Camp H.M. Smith and ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MASTER BEDROOM. VIEW FACING NORTH - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Four-Bedroom, Single-Family Type 10, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

Implementation of a Landscape Lighting System to Display Images

NASA Astrophysics Data System (ADS)

Sun, Gi-Ju; Cho, Sung-Jae; Kim, Chang-Beom; Moon, Cheol-Hong

The system implemented in this study consists of a PC, MASTER, SLAVEs and MODULEs. The PC sets the various landscape lighting displays, and the image files can be sent to the MASTER through a virtual serial port connected to the USB (Universal Serial Bus). The MASTER sends a sync signal to the SLAVE. The SLAVE uses the signal received from the MASTER and the landscape lighting display pattern. The video file is saved in the NAND Flash memory and the R, G, B signals are separated using the self-made display signal and sent to the MODULE so that it can display the image.

LGBTQ Studies and Interdisciplinarity: A Citation Analysis of Master's Theses

ERIC Educational Resources Information Center

Graziano, Vince

2018-01-01

Emergent programs or newly established areas of study are often viewed as interdisciplinary. But how is interdisciplinarity defined or measured? The identification of research methods and the selection of objects of inquiry are significant elements in this definition. Citation analysis, however, also plays a role. Citation patterns in master's…

Defect tolerant transmission lithography mask

DOEpatents

Vernon, Stephen P.

2000-01-01

A transmission lithography mask that utilizes a transparent substrate or a partially transparent membrane as the active region of the mask. A reflective single layer or multilayer coating is deposited on the membrane surface facing the illumination system. The coating is selectively patterned (removed) to form transmissive (bright) regions. Structural imperfections and defects in the coating have negligible effect on the aerial image of the mask master pattern since the coating is used to reflect radiation out of the entrance pupil of the imaging system. Similarly, structural imperfections in the clear regions of the membrane have little influence on the amplitude or phase of the transmitted electromagnetic fields. Since the mask "discards," rather than absorbs, unwanted radiation, it has reduced optical absorption and reduced thermal loading as compared to conventional designs. For EUV applications, the mask circumvents the phase defect problem, and is independent of the thermal load during exposure.

Unmanned Aerial Vehicles Master Plan, 1994. Master Plan.

DTIC Science & Technology

1994-05-31

Terminal SINCGARS = Single-Channel Ground and Airborne Radio System Figure 3-5 Maneuver Variant CONOPS I Psychological operations. deployment with early...650 KM DAT M 3 K (300 DESIRED) BEYOND FORWARD LINE OF OWN TROOPS (FLOT) APPROXIMATE RADIUS OF ACTION LEGEND ATARS = Advanced Tactical Air

Interaction of finger enslaving and error compensation in multiple finger force production.

PubMed

Martin, Joel R; Latash, Mark L; Zatsiorsky, Vladimir M

2009-01-01

Previous studies have documented two patterns of finger interaction during multi-finger pressing tasks, enslaving and error compensation, which do not agree with each other. Enslaving is characterized by positive correlation between instructed (master) and non-instructed (slave) finger(s) while error compensation can be described as a pattern of negative correlation between master and slave fingers. We hypothesize that pattern of finger interaction, enslaving or compensation depends on the initial force level and the magnitude of the targeted force change. Subjects were instructed to press with four fingers (I index, M middle, R ring, and L little) from a specified initial force to target forces following a ramp target line. Force-force relations between master and each of three slave fingers were analyzed during the ramp phase of trials by calculating correlation coefficients within each master-slave pair and then two-factor ANOVA was performed to determine effect of initial force and force increase on the correlation coefficients. It was found that, as initial force increased, the value of the correlation coefficient decreased and in some cases became negative, i.e. the enslaving transformed into error compensation. Force increase magnitude had a smaller effect on the correlation coefficients. The observations support the hypothesis that the pattern of inter-finger interaction--enslaving or compensation--depends on the initial force level and, to a smaller degree, on the targeted magnitude of the force increase. They suggest that the controller views tasks with higher steady-state forces and smaller force changes as implying a requirement to avoid large changes in the total force.

Particle Swarm Optimization with Double Learning Patterns.

PubMed

Shen, Yuanxia; Wei, Linna; Zeng, Chuanhua; Chen, Jian

2016-01-01

Particle Swarm Optimization (PSO) is an effective tool in solving optimization problems. However, PSO usually suffers from the premature convergence due to the quick losing of the swarm diversity. In this paper, we first analyze the motion behavior of the swarm based on the probability characteristic of learning parameters. Then a PSO with double learning patterns (PSO-DLP) is developed, which employs the master swarm and the slave swarm with different learning patterns to achieve a trade-off between the convergence speed and the swarm diversity. The particles in the master swarm and the slave swarm are encouraged to explore search for keeping the swarm diversity and to learn from the global best particle for refining a promising solution, respectively. When the evolutionary states of two swarms interact, an interaction mechanism is enabled. This mechanism can help the slave swarm in jumping out of the local optima and improve the convergence precision of the master swarm. The proposed PSO-DLP is evaluated on 20 benchmark functions, including rotated multimodal and complex shifted problems. The simulation results and statistical analysis show that PSO-DLP obtains a promising performance and outperforms eight PSO variants.

Rydberg blockade in three-atom systems

NASA Astrophysics Data System (ADS)

Barredo, Daniel; Ravets, Sylvain; Labuhn, Henning; Beguin, Lucas; Vernier, Aline; Chicireanu, Radu; Nogrette, Florence; Lahaye, Thierry; Browaeys, Antoine

2014-05-01

The control of individual neutral atoms in arrays of optical tweezers is a promising avenue for quantum science and technology. Here we demonstrate unprecedented control over a system of three Rydberg atoms arranged in linear and triangular configurations. The interaction between Rydberg atoms results in the observation of an almost perfect van der Waals blockade. When the single-atom Rabi frequency for excitation to the Rydberg state is comparable to the interaction energy, we directly observe the anisotropy of the interaction between nD-states. Using the independently measured two-body interaction energy shifts we fully reproduce the dynamics of the three-atom system with a model based on a master equation without any adjustable parameter. Combined with our ability to trap single atoms in arbitrary patterns of 2D arrays of up to 100 traps separated by a few microns, these results are very promising for a scalable implementation of quantum simulation of frustrated quantum magnetism with Rydberg atoms.

From Chaos to Order and Back? A Revisionist Reflection on the California Master Plan for Higher Education@50 and Thoughts about Its Future. Research & Occasional Paper Series: CSHE.7.10

ERIC Educational Resources Information Center

Douglass, John Aubrey

2010-01-01

In 1960, California developed a "master plan" for its already famed public higher education system. It was and continues to be arguably the single most influential effort to plan the future of a system of higher education in the annals of American higher education. Despite popular belief, however, the California Master Plan for Higher…

Mastering multi-depth bio-chip patterns with DVD LBRs

NASA Astrophysics Data System (ADS)

Carson, Doug

2017-08-01

Bio chip and bio disc are rapidly growing technologies used in medical, health and other industries. While there are numerous unique designs and features, these products all rely on precise three-dimensional micro-fluidic channels or arrays to move, separate and combine samples under test. These bio chip and bio disc consumables are typically manufactured by molding these parts to a precise three-dimensional pattern on a negative metal stamper, or they can be made in smaller quantities using an appropriate curable resin and a negative mold/stamper. Stampers required for bio chips have been traditionally made using either micro machining or XY stepping lithography. Both of these technologies have their advantages as well as limitations when it comes to creating micro-fluidic patterns. Significant breakthroughs in continuous maskless lithography have enabled accurate and efficient manufacturing of micro-fluidic masters using LBRs (Laser Beam Recorders) and DRIE (Deep Reactive Ion Etching). The important advantages of LBR continuous lithography vs. XY stepping lithography and micro machining are speed and cost. LBR based continuous lithography is >100x faster than XY stepping lithography and more accurate than micro machining. Several innovations were required in order to create multi-depth patterns with sub micron accuracy. By combining proven industrial LBRs with DCA's G3-VIA pattern generator and DRIE, three-dimensional bio chip masters and stampers are being manufactured efficiently and accurately.

The Newport Button: The Large Scale Replication Of Combined Three-And Two-Dimensional Holographic Images

NASA Astrophysics Data System (ADS)

Cowan, James J.

1984-05-01

A unique type of holographic imagery and its large scale replication are described. The "Newport Button", which was designed as an advertising premium item for the Newport Corporation, incorporates a complex overlay of holographic diffraction gratings surrounding a three-dimensional holographic image of a real object. The combined pattern is recorded onto a photosensitive medium from which a metal master is made. The master is subsequently used to repeatedly emboss the pattern into a thin plastic sheet. Individual patterns are then die cut from the metallized plastic and mounted onto buttons. A discussion is given of the diffraction efficiencies of holograms made in this particular fashion and of the special requirements of the replication process.

Single frequency 1083nm ytterbium doped fiber master oscillator power amplifier laser.

PubMed

Huang, Shenghong; Qin, Guanshi; Shirakawa, Akira; Musha, Mitsuru; Ueda, Ken-Ichi

2005-09-05

Single frequency 1083nm ytterbium fiber master oscillator power amplifier system was demonstrated. The oscillator was a linear fiber cavity with loop mirror filter and polarization controller. The loop mirror with unpumped ytterbium fiber as a narrow bandwidth filter discriminated and selected laser longitudinal modes efficiently. Spatial hole burning effect was restrained by adjusting polarization controller appropriately in the linear cavity. The amplifier was 5 m ytterbium doped fiber pumped by 976nm pigtail coupled laser diode. The linewidth of the single frequency laser was about 2 KHz. Output power up to 177 mW was produced under the launched pump power of 332 mW.

Microfluidics in the Undergraduate Laboratory: Device Fabrication and an Experiment to Mimic Intravascular Gas Embolism

ERIC Educational Resources Information Center

Jablonski, Erin L.; Vogel, Brandon M.; Cavanagh, Daniel P.; Beers, Kathryn L.

2010-01-01

A method to fabricate microfluidic devices and an experimental protocol to model intravascular gas embolism for undergraduate laboratories are presented. The fabrication process details how to produce masters on glass slides; these masters serve as molds to pattern channels in an elastomeric polymer that can be adhered to a substrate, resulting in…

Neural-adaptive control of single-master-multiple-slaves teleoperation for coordinated multiple mobile manipulators with time-varying communication delays and input uncertainties.

PubMed

Li, Zhijun; Su, Chun-Yi

2013-09-01

In this paper, adaptive neural network control is investigated for single-master-multiple-slaves teleoperation in consideration of time delays and input dead-zone uncertainties for multiple mobile manipulators carrying a common object in a cooperative manner. Firstly, concise dynamics of teleoperation systems consisting of a single master robot, multiple coordinated slave robots, and the object are developed in the task space. To handle asymmetric time-varying delays in communication channels and unknown asymmetric input dead zones, the nonlinear dynamics of the teleoperation system are transformed into two subsystems through feedback linearization: local master or slave dynamics including the unknown input dead zones and delayed dynamics for the purpose of synchronization. Then, a model reference neural network control strategy based on linear matrix inequalities (LMI) and adaptive techniques is proposed. The developed control approach ensures that the defined tracking errors converge to zero whereas the coordination internal force errors remain bounded and can be made arbitrarily small. Throughout this paper, stability analysis is performed via explicit Lyapunov techniques under specific LMI conditions. The proposed adaptive neural network control scheme is robust against motion disturbances, parametric uncertainties, time-varying delays, and input dead zones, which is validated by simulation studies.

Pattern fidelity in nanoimprinted films using CD-SAXS

NASA Astrophysics Data System (ADS)

Jones, Ronald L.; Soles, Christopher L.; Lin, Eric K.; Hu, Walter; Reano, Ronald M.; Pang, Stella W.; Weigand, Steven J.; Keane, Denis T.; Quintana, John P.

2005-05-01

The primary measure of process quality in nanoimprint lithography (NIL) is the fidelity of pattern transfer, comparing the dimensions of the imprinted pattern to those of the mold. As a potential next generation lithography, NIL is capable of true nanofabrication, producing patterns of sub-10 nm dimensions. Routine production of nanoscale patterns will require new metrologies capable of non-destructive dimensional measurements of both the mold and the pattern with sub-nm precision. In this article, a rapid, non-destructive technique termed Critical Dimension Small Angle X-ray Scattering (CD-SAXS) is used to measure the cross sectional shape of both a pattern master, or mold, and the resulting imprinted films. CD-SAXS data are used to extract periodicity as well as pattern height, width, and sidewall angles. Films of varying materials are molded by thermal embossed NIL at temperatures both near and far from the bulk glass transition (TG). The polymer systems include a photoresist, representing a mixture of a polymer and small molecular components, and two pure homopolymers. Molding at low temperatures (T-TG < 40°C) produces small aspect ratio patterns that maintain periodicity to within a single nanometer, but feature large sidewall angles. While the pattern height does not reach that of the mold until very large imprinting temperatures (T-TG ~ 70°C), the pattern width of the mold is accurately transferred for T-TG > 30°C. In addition to obtaining basic dimensions, CD-SAXS data are used to assess the origin of loss in pattern fidelity.

MASTER BEDROOM SHOWING THE CLOSET WITH SLIDING DOORS. VIEW FACING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MASTER BEDROOM SHOWING THE CLOSET WITH SLIDING DOORS. VIEW FACING NORTHEAST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Three-Bedroom Single-Family Types 8 and 11, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

MASTER BATH SHOWING SINK WITH VANITY AND THE MEDICINE CABINET. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MASTER BATH SHOWING SINK WITH VANITY AND THE MEDICINE CABINET. VIEW FACING WEST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, U-Shaped Two-Bedroom Single-Family Type 6, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

Automated Processing of 2-D Gel Electrophoretograms of Genomic DNA for Hunting Pathogenic DNA Molecular Changes.

PubMed

Takahashi; Nakazawa; Watanabe; Konagaya

1999-01-01

We have developed the automated processing algorithms for 2-dimensional (2-D) electrophoretograms of genomic DNA based on RLGS (Restriction Landmark Genomic Scanning) method, which scans the restriction enzyme recognition sites as the landmark and maps them onto a 2-D electrophoresis gel. Our powerful processing algorithms realize the automated spot recognition from RLGS electrophoretograms and the automated comparison of a huge number of such images. In the final stage of the automated processing, a master spot pattern, on which all the spots in the RLGS images are mapped at once, can be obtained. The spot pattern variations which seemed to be specific to the pathogenic DNA molecular changes can be easily detected by simply looking over the master spot pattern. When we applied our algorithms to the analysis of 33 RLGS images derived from human colon tissues, we successfully detected several colon tumor specific spot pattern changes.

Steroids are required for epidermal cell fate establishment in Arabidopsis roots.

PubMed

Kuppusamy, Kavitha T; Chen, Andrew Y; Nemhauser, Jennifer L

2009-05-12

The simple structure of Arabidopsis roots provides an excellent model system to study epidermal cell fate specification. Epidermal cells in contact with 2 underlying cortical cells differentiate into hair cells (H cells; trichoblasts), whereas cells that contact only a single cortical cell differentiate into mature hairless cells (N cells; atrichoblasts). This position-dependent patterning, in combination with the constrained orientation of cell divisions, results in hair and nonhair cell files running longitudinally along the root epidermis. Here, we present strong evidence that steroid hormones called brassinosteroids (BRs) are required to maintain position-dependent fate specification in roots. We show that BRs are required for normal expression levels and patterns of WEREWOLF (WER) and GLABRA2 (GL2), master regulators of epidermal patterning. Loss of BR signaling results in loss of hair cells in H positions, likely as a consequence of reduced expression of CAPRICE (CPC), a direct downstream target of WER. Our observations demonstrate that in addition to their well-known role in cell expansion, BRs play an essential role in directing cell fate.

Steroids are required for epidermal cell fate establishment in Arabidopsis roots

PubMed Central

Kuppusamy, Kavitha T.; Chen, Andrew Y.; Nemhauser, Jennifer L.

2009-01-01

The simple structure of Arabidopsis roots provides an excellent model system to study epidermal cell fate specification. Epidermal cells in contact with 2 underlying cortical cells differentiate into hair cells (H cells; trichoblasts), whereas cells that contact only a single cortical cell differentiate into mature hairless cells (N cells; atrichoblasts). This position-dependent patterning, in combination with the constrained orientation of cell divisions, results in hair and nonhair cell files running longitudinally along the root epidermis. Here, we present strong evidence that steroid hormones called brassinosteroids (BRs) are required to maintain position-dependent fate specification in roots. We show that BRs are required for normal expression levels and patterns of WEREWOLF (WER) and GLABRA2 (GL2), master regulators of epidermal patterning. Loss of BR signaling results in loss of hair cells in H positions, likely as a consequence of reduced expression of CAPRICE (CPC), a direct downstream target of WER. Our observations demonstrate that in addition to their well-known role in cell expansion, BRs play an essential role in directing cell fate. PMID:19416891

Fabrication of a negative PMMA master mold for soft-lithography by MeV ion beam lithography

NASA Astrophysics Data System (ADS)

Puttaraksa, Nitipon; Unai, Somrit; Rhodes, Michael W.; Singkarat, Kanda; Whitlow, Harry J.; Singkarat, Somsorn

2012-02-01

In this study, poly(methyl methacrylate) (PMMA) was investigated as a negative resist by irradiation with a high-fluence 2 MeV proton beam. The beam from a 1.7 MV Tandetron accelerator at the Plasma and Beam Physics Research Facility (PBP) of Chiang Mai University is shaped by a pair of computer-controlled L-shaped apertures which are used to expose rectangular pattern elements with 1-1000 μm side length. Repeated exposure of rectangular pattern elements allows a complex pattern to be built up. After subsequent development, the negative PMMA microstructure was used as a master mold for casting poly(dimethylsiloxane) (PDMS) following a standard soft-lithography process. The PDMS chip fabricated by this technique was demonstrated to be a microfluidic device.

VIEW OF MASTER BATHROOM SHOWING TYPICAL SHOWER, STORAGE CABINETS BEHIND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF MASTER BATHROOM SHOWING TYPICAL SHOWER, STORAGE CABINETS BEHIND SHOWER, AND LAVATORY. VIEW FACING WEST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Three-Bedroom Single-Family Type 9, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

VIEW OF MASTER BEDROOM TAKEN FROM BATHROOM ENTRY, SHOWING CLOSETS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF MASTER BEDROOM TAKEN FROM BATHROOM ENTRY, SHOWING CLOSETS ON RIGHT HAND SIDE. VIEW FACING SOUTHEAST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Three-Bedroom Single-Family Type 9, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

MASTER BATH. NOTE THE LINEN CLOSET DOOR TO THE RIGHT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MASTER BATH. NOTE THE LINEN CLOSET DOOR TO THE RIGHT OF THE SHOWER ENCLOSURE. VIEW FACING NORTHEAST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Three-Bedroom Single-Family Type 7, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

MASTER BEDROOM. NOTE THE CANEC PANEL CEILING AND TONGUE AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MASTER BEDROOM. NOTE THE CANEC PANEL CEILING AND TONGUE AND GROOVE WALL BOARDS. VIEW FACING SOUTH - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Three-Bedroom Single-Family Type 7, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

Particle Swarm Optimization with Double Learning Patterns

PubMed Central

Shen, Yuanxia; Wei, Linna; Zeng, Chuanhua; Chen, Jian

2016-01-01

Particle Swarm Optimization (PSO) is an effective tool in solving optimization problems. However, PSO usually suffers from the premature convergence due to the quick losing of the swarm diversity. In this paper, we first analyze the motion behavior of the swarm based on the probability characteristic of learning parameters. Then a PSO with double learning patterns (PSO-DLP) is developed, which employs the master swarm and the slave swarm with different learning patterns to achieve a trade-off between the convergence speed and the swarm diversity. The particles in the master swarm and the slave swarm are encouraged to explore search for keeping the swarm diversity and to learn from the global best particle for refining a promising solution, respectively. When the evolutionary states of two swarms interact, an interaction mechanism is enabled. This mechanism can help the slave swarm in jumping out of the local optima and improve the convergence precision of the master swarm. The proposed PSO-DLP is evaluated on 20 benchmark functions, including rotated multimodal and complex shifted problems. The simulation results and statistical analysis show that PSO-DLP obtains a promising performance and outperforms eight PSO variants. PMID:26858747

Marionette

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, M.; Anderson, D.P.

1988-01-01

Marionette is a system for distributed parallel programming in an environment of networked heterogeneous computer systems. It is based on a master/slave model. The master process can invoke worker operations (asynchronous remote procedure calls to single slaves) and context operations (updates to the state of all slaves). The master and slaves also interact through shared data structures that can be modified only by the master. The master and slave processes are programmed in a sequential language. The Marionette runtime system manages slave process creation, propagates shared data structures to slaves as needed, queues and dispatches worker and context operations, andmore » manages recovery from slave processor failures. The Marionette system also includes tools for automated compilation of program binaries for multiple architectures, and for distributing binaries to remote fuel systems. A UNIX-based implementation of Marionette is described.« less

Stochastic locality and master-field simulations of very large lattices

NASA Astrophysics Data System (ADS)

Lüscher, Martin

2018-03-01

In lattice QCD and other field theories with a mass gap, the field variables in distant regions of a physically large lattice are only weakly correlated. Accurate stochastic estimates of the expectation values of local observables may therefore be obtained from a single representative field. Such master-field simulations potentially allow very large lattices to be simulated, but require various conceptual and technical issues to be addressed. In this talk, an introduction to the subject is provided and some encouraging results of master-field simulations of the SU(3) gauge theory are reported.

Remote heterodyne millimeter-wave over fiber based OFDM-PON with master-to-slave injected dual-mode colorless FPLD pair.

PubMed

Chen, Hsiang-Yu; Chi, Yu-Chieh; Lin, Gong-Ru

2015-08-24

A remote heterodyne millimeter-wave (MMW) carrier at 47.7 GHz over fiber synthesized with the master-to-slave injected dual-mode colorless FPLD pair is proposed, which enables the future connection between the wired fiber-optic 64-QAM OFDM-PON at 24 Gb/s with the MMW 4-QAM OFDM wireless network at 2 Gb/s. Both the single- and dual-mode master-to-slave injection-locked colorless FPLD pairs are compared to optimize the proposed 64-QAM OFDM-PON. For the unamplified single-mode master, the slave colorless FPLD successfully performs the 64-QAM OFDM data at 24 Gb/s with EVM, SNR and BER of 8.5%, 21.5 dB and 2.9 × 10(-3), respectively. In contrast, the dual-mode master-to-slave injection-locked colorless FPLD pair with amplified and unfiltered master can transmit 64-QAM OFDM data at 18 Gb/s over 25-km SMF to provide EVM, SNR and BER of 8.2%, 21.8 dB and 2.2 × 10(-3), respectively. For the dual-mode master-to-slave injection-locked colorless FPLD pair, even though the modal dispersion occurred during 25-km SMF transmission makes it sacrifice the usable OFDM bandwidth by only 1 GHz, which guarantees the sufficient encoding bitrate for the optically generated MMW carrier to implement the fusion of MMW wireless LAN and DWDM-PON with cost-effective and compact architecture. As a result, the 47.7-GHz MMW carrier remotely beat from the dual-mode master-to-slave injection-locked colorless FPLD pair exhibits an extremely narrow bandwidth of only 0.48 MHz. After frequency down-conversion operation, the 47.7-GHz MMW carrier successfully delivers 4-QAM OFDM data up to 2 Gb/s with EVM, SNR and BER of 33.5%, 9.51 dB and 1.4 × 10(-3), respectively.

Bus-Programmable Slave Card

NASA Technical Reports Server (NTRS)

Hall, William A.

1990-01-01

Slave microprocessors in multimicroprocessor computing system contains modified circuit cards programmed via bus connecting master processor with slave microprocessors. Enables interactive, microprocessor-based, single-loop control. Confers ability to load and run program from master/slave bus, without need for microprocessor development station. Tristate buffers latch all data and information on status. Slave central processing unit never connected directly to bus.

An Outline of a Proposed Five- plus Three-Year Combined Undergraduate-Master's Degree for Clinical Medicine Majors at Nanjing Medical University

ERIC Educational Resources Information Center

Gao, Xing-Ya; Yu, Rong-Bin; Shen, Hong-Bing; Chen, Qi

2014-01-01

To build an effective model to train excellent doctors, Nanjing Medical University has proposed a five- plus three-year combined undergraduate-master's clinical medicine degree program. The program integrates undergraduate education, the education of research students, and standardized doctor residency training into a single system, allowing…

MASTER BEDROOM SHOWING THE WINDOWS IN THE UPPER PORTION OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MASTER BEDROOM SHOWING THE WINDOWS IN THE UPPER PORTION OF THE EXTERIOR WALL AND THE SLIDING CLOSET DOORS. VIEW FACING WEST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, U-Shaped Two-Bedroom Single-Family Type 6, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

MASTER BATH SHOWING THE LINEN CLOSET WITH BUILT IN SHELVES ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

MASTER BATH SHOWING THE LINEN CLOSET WITH BUILT IN SHELVES NEXT TO THE SHOWER ENCLOSURE. VIEW FACING NORTHEAST - Camp H.M. Smith and Navy Public Works Center Manana Title VII (Capehart) Housing, Three-Bedroom Single-Family Types 8 and 11, Birch Circle, Elm Drive, Elm Circle, and Date Drive, Pearl City, Honolulu County, HI

Concepts for Near Continuous Reception of VHF (Very High Frequency) Signals Using Meteor Burst Propagation.

DTIC Science & Technology

1985-07-15

search of the non-government Master Frequency List was made on the microfiche list at the San Diego field office of the FCC. All frequencies in the...channels assigned. A single frequency often has a number of different users. The government Master Frequency List is maintained at area regional centers and

Students' Attitudes towards Technology-Enabled Learning: A Change in Learning Patterns? The Case of a Master's Course in Political Science

ERIC Educational Resources Information Center

Paunescu, Mihai

2013-01-01

This article sets to explore the attitudes of higher education students enrolled in a political science programme at Master level towards e-learning facilitated by the introduction of a Moodle platform. The students have been surveyed at the end of public management course in the first semester of the programme asking them to evaluate both the…

Dual-user nonlinear teleoperation subjected to varying time delay and bounded inputs.

PubMed

Zakerimanesh, Amir; Hashemzadeh, Farzad; Ghiasi, Amir Rikhtehgar

2017-05-01

A novel trilateral control architecture for Dual-master/Single-slave teleoperation system with taking account of saturation in actuators, nonlinear dynamics for telemanipulators and bounded varying time delay which affects the transmitted signals in the communication channels, is proposed in this paper. In this research, we will address the stability and desired position coordination problem of trilateral teleoperation system by extension of (nP+D) controller that is used for Single-master/Single-slave teleoperation system. Our proposed controller is weighted summation of nonlinear Proportional plus Damping (nP+D) controller that incorporate gravity compensation and the weights are specified by the dominance factor, which determines the supremacy of each user over the slave robot and over the other user. The asymptotic stability of closed loop dynamics is studied using Lyapunov-Krasovskii functional under conditions on the controller parameters, the actuator saturation characteristics and the maximum values of varying time delays. It is shown that these controllers satisfy the desired position coordination problem in free motion condition. To show the effectiveness of the proposed method, a number of simulations have been conducted on a varying time delay Dual-master/Single-slave teleoperation system using 3-DOF planar robots for each telemanipulator subjected to actuator saturation. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Diagnostic Profiles: A Standard Setting Method for Use with a Cognitive Diagnostic Model

ERIC Educational Resources Information Center

Skaggs, Gary; Hein, Serge F.; Wilkins, Jesse L. M.

2016-01-01

This article introduces the Diagnostic Profiles (DP) standard setting method for setting a performance standard on a test developed from a cognitive diagnostic model (CDM), the outcome of which is a profile of mastered and not-mastered skills or attributes rather than a single test score. In the DP method, the key judgment task for panelists is a…

Master stability functions reveal diffusion-driven pattern formation in networks

NASA Astrophysics Data System (ADS)

Brechtel, Andreas; Gramlich, Philipp; Ritterskamp, Daniel; Drossel, Barbara; Gross, Thilo

2018-03-01

We study diffusion-driven pattern formation in networks of networks, a class of multilayer systems, where different layers have the same topology, but different internal dynamics. Agents are assumed to disperse within a layer by undergoing random walks, while they can be created or destroyed by reactions between or within a layer. We show that the stability of homogeneous steady states can be analyzed with a master stability function approach that reveals a deep analogy between pattern formation in networks and pattern formation in continuous space. For illustration, we consider a generalized model of ecological meta-food webs. This fairly complex model describes the dispersal of many different species across a region consisting of a network of individual habitats while subject to realistic, nonlinear predator-prey interactions. In this example, the method reveals the intricate dependence of the dynamics on the spatial structure. The ability of the proposed approach to deal with this fairly complex system highlights it as a promising tool for ecology and other applications.

Giant fluctuations and structural effects in a flocking epithelium

NASA Astrophysics Data System (ADS)

Giavazzi, Fabio; Malinverno, Chiara; Corallino, Salvatore; Ginelli, Francesco; Scita, Giorgio; Cerbino, Roberto

2017-09-01

Epithelial cells cultured in a monolayer are very motile in isolation but reach a near-jammed state when mitotic division increases their number above a critical threshold. We have recently shown that a monolayer can be reawakened by over-expression of a single protein, RAB5A, a master regulator of endocytosis. This reawakening of motility was explained in terms of a flocking transition that promotes the emergence of a large-scale collective migratory pattern. Here we focus on the impact of this reawakening on the structural properties of the monolayer. We find that the unjammed monolayer is characterised by a fluidisation at the single cell level, and by enhanced non-equilibrium large-scale number fluctuations at a larger length scale. Also, with the help of numerical simulations, we trace back the origin of these fluctuations to the self-propelled active nature of the constituents, and to the existence of a local alignment mechanism, leading to the spontaneous breaking of the orientational symmetry.

Self-seeded single-frequency solid-state ring laser and system using same

DOEpatents

Dane, C. Brent; Hackel, Lloyd; Harris, Fritz B.

2007-02-20

A method of operating a laser to obtain an output pulse having a single wavelength, comprises inducing an intracavity loss into a laser resonator having an amount that prevents oscillation during a time that energy from the pump source is being stored in the gain medium. Gain is built up in the gain medium with energy from the pump source until formation of a single-frequency relaxation oscillation pulse in the resonator. Upon detection of the onset of the relaxation oscillation pulse, the intracavity loss is reduced, such as by Q-switching, so that the built-up gain stored in the gain medium is output from the resonator in the form of an output pulse at a single frequency. An electronically controllable output coupler is controlled to affect output pulse characteristics. The laser acts a master oscillator in a master oscillator power amplifier configuration. The laser is used for laser peening.

Self-seeded single-frequency laser peening method

DOEpatents

Dane, C Brent [Livermore, CA; Hackel, Lloyd [Livermore, CA; Harris, Fritz B [Rocklin, CA

2009-08-11

A method of operating a laser to obtain an output pulse having a single wavelength, comprises inducing an intracavity loss into a laser resonator having an amount that prevents oscillation during a time that energy from the pump source is being stored in the gain medium. Gain is built up in the gain medium with energy from the pump source until formation of a single-frequency relaxation oscillation pulse in the resonator. Upon detection of the onset of the relaxation oscillation pulse, the intracavity loss is reduced, such as by Q-switching, so that the built-up gain stored in the gain medium is output from the resonator in the form of an output pulse at a single frequency. An electronically controllable output coupler is controlled to affect output pulse characteristics. The laser acts a master oscillator in a master oscillator power amplifier configuration. The laser is used for laser peening.

Self-seeded single-frequency laser peening method

DOEpatents

DAne, C Brent; Hackey, Lloyd A; Harris, Fritz B

2012-06-26

A method of operating a laser to obtain an output pulse having a single wavelength, comprises inducing an intracavity loss into a laser resonator having an amount that prevents oscillation during a time that energy from the pump source is being stored in the gain medium. Gain is built up in the gain medium with energy from the pump source until formation of a single-frequency relaxation oscillation pulse in the resonator. Upon detection of the onset of the relaxation oscillation pulse, the intracavity loss is reduced, such as by Q-switching, so that the built-up gain stored in the gain medium is output from the resonator in the form of an output pulse at a single frequency. An electronically controllable output coupler is controlled to affect output pulse characteristics. The laser acts a master oscillator in a master oscillator power amplifier configuration. The laser is used for laser peening.

Single-Frame Cinema. Three Dimensional Computer-Generated Imaging.

ERIC Educational Resources Information Center

Cheetham, Edward Joseph, II

This master's thesis provides a description of the proposed art form called single-frame cinema, which is a category of computer imagery that takes the temporal polarities of photography and cinema and unites them into a single visual vignette of time. Following introductory comments, individual chapters discuss (1) the essential physical…

Accurate analytic solution of chemical master equations for gene regulation networks in a single cell

NASA Astrophysics Data System (ADS)

Huang, Guan-Rong; Saakian, David B.; Hu, Chin-Kun

2018-01-01

Studying gene regulation networks in a single cell is an important, interesting, and hot research topic of molecular biology. Such process can be described by chemical master equations (CMEs). We propose a Hamilton-Jacobi equation method with finite-size corrections to solve such CMEs accurately at the intermediate region of switching, where switching rate is comparable to fast protein production rate. We applied this approach to a model of self-regulating proteins [H. Ge et al., Phys. Rev. Lett. 114, 078101 (2015), 10.1103/PhysRevLett.114.078101] and found that as a parameter related to inducer concentration increases the probability of protein production changes from unimodal to bimodal, then to unimodal, consistent with phenotype switching observed in a single cell.

Concept for a large master/slave-controlled robotic hand

NASA Technical Reports Server (NTRS)

Grissom, William A.; Abdallah, Mahmoud A.; White, Carl L.

1988-01-01

A strategy is presented for the design and construction of a large master/slave-controlled, five-finger robotic hand. Each of the five fingers will possess four independent axes each driven by a brushless DC servomotor and, thus, four degrees-of-freedom. It is proposed that commercially available components be utilized as much as possible to fabricate a working laboratory model of the device with an anticipated overall length of two-to-four feet (0.6 to 1.2 m). The fingers are to be designed so that proximity, tactile, or force/torque sensors can be imbedded in their structure. In order to provide for the simultaneous control of the twenty independent hand joints, a multilevel master/slave control strategy is proposed in which the operator wears a specially instrumented glove which produces control signals corresponding to the finger configurations and which is capable of conveying sensor feedback signals to the operator. Two dexterous hand master devices are currently commercially available for this application with both undergoing continuing development. A third approach to be investigated for the master control mode is the use of real-time image processing of a specially patterned master glove to provide the respective control signals for positioning the multiple finger joints.

As They Liked It: The Tragical-Comical-Pastoral Drama of Elizabethan Theatre. Curriculum Projects. The Huntington Theatre Company's Master Works Study in Shakespeare.

ERIC Educational Resources Information Center

Huntington Theatre Co., Boston, MA.

Developed by the participants of the Huntington Theatre Company's Master Works Study in Shakespeare, this collection presents single lesson plans and unit plans for teaching Elizabethan drama. The collection presents 12 lesson plans (spanning one or a few days of instruction) and 15 unit plans (ranging over several weeks) suitable for secondary…

Publishing scientific papers based on Master's and Ph.D. theses from a small scientific community: case study of Croatian medical schools.

PubMed

Frković, Vedran; Skender, Tomislav; Dojćinović, Bojan; Bilić-Zulle, Lidija

2003-02-01

To evaluate publishing activity of medical doctors after they have obtained Master's or Ph.D. degree at the Rijeka and Zagreb University Schools of Medicine in Croatia, and establish the number of journal articles based on these theses. Data on Master's and Ph.D. theses defended at the Rijeka and Zagreb University Schools of Medicine in the 1990-1999 period were collected by hand-search of the archive. MEDLINE and Current Contents databases were searched for journal articles resulting from the theses. During the 10-year period, 1,535 Master's and 634 Ph.D. theses were defended at the Rijeka and Zagreb University Schools of Medicine (253 Master's and 138 Ph.D. theses from Rijeka and 1,282 Master's and 496 Ph.D. theses from Zagreb). There were 201 (14%) Master's and 218 (34%) Ph.D. theses that resulted in articles published in journals indexed in MEDLINE (13% of Master's and 11% of Ph.D. theses from Rijeka, and 14% of Master's and 41% of Ph.D. theses from Zagreb). Also, 97 (6%) Master's and 129 (20%) Ph.D. theses that resulted in articles published in Current Contents journals (8% of Master's and 6% of Ph.D. theses from Rijeka, and 6% of Master's and 24% of Ph.D. theses from Zagreb). There was no significant difference between the two Universities with respect to published articles based on Master's theses, but there were significantly more articles from Ph.D. theses in Zagreb (p<0.001). Most of the theses resulted in a single publication (95%), 19 (5%) in 2, and 2 in 3 publications. Out of all 453 journal articles, 31% were published in Croatian and 69% in international journals. Most Croatian Master's and Ph.D. theses are not made available to the scientific community. There should be more institutional effort directed at the stimulation of postgraduate students to publish their scientific work.

Finite state projection based bounds to compare chemical master equation models using single-cell data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, Zachary; Neuert, Gregor; Department of Pharmacology, School of Medicine, Vanderbilt University, Nashville, Tennessee 37232

2016-08-21

Emerging techniques now allow for precise quantification of distributions of biological molecules in single cells. These rapidly advancing experimental methods have created a need for more rigorous and efficient modeling tools. Here, we derive new bounds on the likelihood that observations of single-cell, single-molecule responses come from a discrete stochastic model, posed in the form of the chemical master equation. These strict upper and lower bounds are based on a finite state projection approach, and they converge monotonically to the exact likelihood value. These bounds allow one to discriminate rigorously between models and with a minimum level of computational effort.more » In practice, these bounds can be incorporated into stochastic model identification and parameter inference routines, which improve the accuracy and efficiency of endeavors to analyze and predict single-cell behavior. We demonstrate the applicability of our approach using simulated data for three example models as well as for experimental measurements of a time-varying stochastic transcriptional response in yeast.« less

Master-slave mixed arrays for data-flow computations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chang, T.L.; Fisher, P.D.

1983-01-01

Control cells (masters) and computation cells (slaves) are mixed in regular geometric patterns to form reconfigurable arrays known as master-slave mixed arrays (MSMAS). Interconnections of the corners and edges of the hexagonal control cells and the edges of the hexagonal computation cells are used to construct synchronous and asynchronous communication networks, which support local computation and local communication. Data-driven computations result in self-directed ring pipelines within the MSMA, and composite data-flow computations are executed in a pipelined fashion. By viewing an MSMA as a computing network of tightly-linked ring pipelines, data-flow programs can be uniformly distributed over these pipelines formore » efficient resource utilisation. 9 references.« less

Post-Baccalaureate Enrollment Patterns: Exploring the Relationship between Undergraduate Student Loan Borrowing Level and Timing of Initial Entry to Master's Degree or First Professional Degree Programs

ERIC Educational Resources Information Center

Maliwesky, Martin J.

2012-01-01

This study was undertaken to (a) expand scholarship on the impact of undergraduate student loan borrowing level on the timing of initial entry to master's degree or first professional degree programs, and (b) to assist higher education policy makers and practitioners in serving the needs of students as they progress through the various stages…

Elastomeric impression materials: a comparison of accuracy of multiple pours.

PubMed

Kumar, Dheeraj; Madihalli, Anand U; Reddy, K Rajeev Kumar; Rastogi, Namrataa; Pradeep, N T

2011-07-01

The aim of the present study is to compare the various elastomeric impression materials in terms of accuracy and dimensional stability, with respect to obtaining multiple casts from a single elastomeric impression at various times of pours. Three master dies were prepared for the impression making, two of these were made of brass containing a central hole with undercuts. The third die simulated a conventionally prepared typodont maxillary central incisor. Three elastomeric impression materials were chosen for the study. Each impression was poured at various time periods. Casts thus obtained were evaluated under a traveling microscope to evaluate various dimensional changes. Addition silicones provided dies which were shorter in height and bigger in diameter. Polyethers provided dies which were shorter in both height and diameter. Condensation silicones showed insignificant changes from the master die at the immediate pour but deteriorated rapidly after that in subsequent pours. None of the impression material showed a consistent behavior up to the fourth pour. They occasionally showed deviation from the pattern, but all these values were statistically insignificant. Polyethers showed lesser ability than both the addition silicones as well as the condensation silicones to recover from induced deformation. Addition silicones as well as the condensation silicones have better ability to recover from induced deformation when compared to polyether.

Longevity of Single-Tooth All-Ceramic CAD/CAM Restorations: A Meta-Analysis

DTIC Science & Technology

2013-07-01

A thesis submitted to the Faculty of the Comprehensive Dentistry Graduate Program Naval Postgraduate Dental School Uniformed Services...Naval Postgraduate Dental School Uniformed Services University of the Health Sciences Bethesda, Maryland CERTIFICATE OF APPROVAL MASTER’S THESIS...This is to certify that the Master’s thesis of Katherine L. Cheng Lieutenant, Dental Corps, U.S. Navy has been approved by the Examining Committee for

Topological control of life and death in non-proliferative epithelia.

PubMed

Martinand-Mari, Camille; Maury, Benoit; Rousset, François; Sahuquet, Alain; Mennessier, Gérard; Rochal, Sergei; Lorman, Vladimir; Mangeat, Paul; Baghdiguian, Stephen

2009-01-01

Programmed cell death is one of the most fascinating demonstrations of the plasticity of biological systems. It is classically described to act upstream of and govern major developmental patterning processes (e.g. inter-digitations in vertebrates, ommatidia in Drosophila). We show here the first evidence that massive apoptosis can also be controlled and coordinated by a pre-established pattern of a specific 'master cell' population. This new concept is supported by the development and validation of an original model of cell patterning. Ciona intestinalis eggs are surrounded by a three-layered follicular organization composed of 60 elongated floating extensions made of as many outer and inner cells, and indirectly spread through an extracellular matrix over 1200 test cells. Experimental and selective ablation of outer and inner cells results in the abrogation of apoptosis in respective remaining neighbouring test cells. In addition incubation of outer/inner follicular cell-depleted eggs with a soluble extract of apoptotic outer/inner cells partially restores apoptosis to apoptotic-defective test cells. The 60 inner follicular cells were thus identified as 'apoptotic master' cells which collectively are induction sites for programmed cell death of the underlying test cells. The position of apoptotic master cells is controlled by topological constraints exhibiting a tetrahedral symmetry, and each cell spreads over and can control the destiny of 20 smaller test cells, which leads to optimized apoptosis signalling.

Interactive Virtual Suturing Simulations: Enhancement of Student Learning in Veterinary Medicine

ERIC Educational Resources Information Center

Staton, Amy J.; Boyd, Christine B.

2013-01-01

This capstone addresses an instructional gap in the Morehead State University Veterinary Technology Program and in other similar programs around the globe. Students do not retain the knowledge needed to proficiently complete suture patterns nor do students receive sufficient instructional time during the year to master each suture pattern that is…

Characteristics of the Social Demand for Two-Level Professional Training

ERIC Educational Resources Information Center

Tuzikov, A.; Zinurova, R.

2009-01-01

The political decision to convert to the system of multilevel professional training in the higher educational institutions of Russia has already been made and formalized in law. The system, a combination of the "bachelor's and master's" pattern and the "specialist" pattern is being adopted starting in 2009. However, in spite of…

PATTERNS OF MASTERY AND CONFLICT RESOLUTION AT THE ELEMENTARY SCHOOL LEVEL.

ERIC Educational Resources Information Center

MINUCHIN, PATRICIA; AND OTHERS

EFFORTS WERE DIRECTED TOWARD THE EXPLORATION OF CONNECTIONS BETWEEN THE HOME AND SCHOOL BACKGROUND INFLUENCES OF FOURTH-GRADE CHILDREN, AND THE PATTERNS OF RESPONSE THROUGH WHICH CHILDREN MASTER CHALLENGE, REACT TO OPPORTUNITY, AND EXPRESS AND HANDLE CONFLICT. THIS CURRENT RESEARCH WAS BUILT UPON AN EARLIER STUDY WHICH ASSESSED THE EFFECTS OF…

Social Patterns in Mobile Technology Mediated Collaboration among Members of the Professional Distance Education Community

ERIC Educational Resources Information Center

Laru, Jari; Jarvela, Sanna

2008-01-01

The aim of this study was to identify social patterns in mobile technology mediated collaboration among distributed members of the professional distance education community. Ten participants worked for 12 weeks designing a master's programme in information sciences. The participants' mobile technology usage activity and interview data were first…

A fast flexible ink-jet printing method for patterning dissociated neurons in culture.

PubMed

Sanjana, Neville E; Fuller, Sawyer B

2004-07-30

We present a new technique that uses a custom-built ink-jet printer to fabricate precise micropatterns of cell adhesion materials for neural cell culture. Other work in neural cell patterning has employed photolithography or "soft lithographic" techniques such as micro-stamping, but such approaches are limited by their use of an un-alterable master pattern such as a mask or stamp master and can be resource-intensive. In contrast, ink-jet printing, used in low-cost desktop printers, patterns material by depositing microscopic droplets under robotic control in a programmable and inexpensive manner. We report the use of ink-jet printing to fabricate neuron-adhesive patterns such as islands and other shapes using poly(ethylene) glycol as the cell-repulsive material and a collagen/poly-D-lysine (PDL) mixture as the cell-adhesive material. We show that dissociated rat hippocampal neurons and glia grown at low densities on such patterns retain strong pattern adherence for over 25 days. The patterned neurons are comparable to control, un-patterned cells in electrophysiological properties and in immunocytochemical measurements of synaptic density and inhibitory cell distributions. We suggest that an inexpensive desktop printer may be an accessible tool for making micro-island cultures and other basic patterns. We also suggest that ink-jet printing may be extended to a range of developmental neuroscience studies, given its ability to more easily layer materials, build substrate-bound gradients, construct out-of-plane structure, and deposit sources of diffusible factors. Copyright 2004 Elsevier B.V.

System for simultaneously loading program to master computer memory devices and corresponding slave computer memory devices

NASA Technical Reports Server (NTRS)

Hall, William A. (Inventor)

1993-01-01

A bus programmable slave module card for use in a computer control system is disclosed which comprises a master computer and one or more slave computer modules interfacing by means of a bus. Each slave module includes its own microprocessor, memory, and control program for acting as a single loop controller. The slave card includes a plurality of memory means (S1, S2...) corresponding to a like plurality of memory devices (C1, C2...) in the master computer, for each slave memory means its own communication lines connectable through the bus with memory communication lines of an associated memory device in the master computer, and a one-way electronic door which is switchable to either a closed condition or a one-way open condition. With the door closed, communication lines between master computer memory (C1, C2...) and slave memory (S1, S2...) are blocked. In the one-way open condition invention, the memory communication lines or each slave memory means (S1, S2...) connect with the memory communication lines of its associated memory device (C1, C2...) in the master computer, and the memory devices (C1, C2...) of the master computer and slave card are electrically parallel such that information seen by the master's memory is also seen by the slave's memory. The slave card is also connectable to a switch for electronically removing the slave microprocessor from the system. With the master computer and the slave card in programming mode relationship, and the slave microprocessor electronically removed from the system, loading a program in the memory devices (C1, C2...) of the master accomplishes a parallel loading into the memory devices (S1, S2...) of the slave.

Two-Photon Excited Fluorescence from Biological Aerosol Particles

DTIC Science & Technology

2010-09-29

in material damage. We overcame these limitations by building a band-limited Yb-doped fiber laser with no dispersion compensation [9], as the master...master oscillator was an all-normal- dispersion Yb-doped fiber laser [9], followed by high- dispersion fiber for stretching the pulses, a single-mode...of ~670 fs in duration, and its expected transform-limited pulse width for a normal- dispersion laser with this spectral width would be ~454 fs [10

Generalized Scaling and the Master Variable for Brownian Magnetic Nanoparticle Dynamics

PubMed Central

Reeves, Daniel B.; Shi, Yipeng; Weaver, John B.

2016-01-01

Understanding the dynamics of magnetic particles can help to advance several biomedical nanotechnologies. Previously, scaling relationships have been used in magnetic spectroscopy of nanoparticle Brownian motion (MSB) to measure biologically relevant properties (e.g., temperature, viscosity, bound state) surrounding nanoparticles in vivo. Those scaling relationships can be generalized with the introduction of a master variable found from non-dimensionalizing the dynamical Langevin equation. The variable encapsulates the dynamical variables of the surroundings and additionally includes the particles’ size distribution and moment and the applied field’s amplitude and frequency. From an applied perspective, the master variable allows tuning to an optimal MSB biosensing sensitivity range by manipulating both frequency and field amplitude. Calculation of magnetization harmonics in an oscillating applied field is also possible with an approximate closed-form solution in terms of the master variable and a single free parameter. PMID:26959493

Nanomoulding of Functional Materials, a Versatile Complementary Pattern Replication Method to Nanoimprinting

PubMed Central

Battaglia, Corsin; Söderström, Karin; Escarré, Jordi; Haug, Franz-Josef; Despeisse, Matthieu; Ballif, Christophe

2013-01-01

We describe a nanomoulding technique which allows low-cost nanoscale patterning of functional materials, materials stacks and full devices. Nanomoulding combined with layer transfer enables the replication of arbitrary surface patterns from a master structure onto the functional material. Nanomoulding can be performed on any nanoimprinting setup and can be applied to a wide range of materials and deposition processes. In particular we demonstrate the fabrication of patterned transparent zinc oxide electrodes for light trapping applications in solar cells. PMID:23380874

CHAD-Master

EPA Pesticide Factsheets

Detailed data on human behavior from 19 studies has been compiled into the Consolidated Human Activity Database (CHAD) , enabling researchers to examine specific population groups for unique activity patterns that influence overall exposure to chemicals.

Magnitude and Chronometry of Neural Mechanisms of Emotion Regulation in Subtypes of Aggressive Children

ERIC Educational Resources Information Center

Lamm, Connie; Granic, Isabela; Zelazo, Philip David; Lewis, Marc D.

2011-01-01

Emotion regulation is a key social skill and children who fail to master it are at risk for clinical disorders. Specific styles of emotion regulation have been associated with particular patterns of prefrontal activation. We investigated whether anxious aggressive children would reveal a different pattern of cortical activation than non-anxious…

In situ curing of sliding SU-8 droplet over a microcontact printed pattern for tunable fabrication of a polydimethylsiloxane nanoslit.

PubMed

Kim, Chang-Beom; Chun, Honggu; Chung, JaeHun; Lee, Kwang Ho; Lee, Jeong Hoon; Song, Ki-Bong; Lee, Sang-Hoon

2011-09-15

A tunable process for polydimethylsiloxane (PDMS) nanoslit fabrication is developed for nanofluidic applications. A microcontact printing (μCP) of a laterally spreading self-assembled hexadecanethiol (HDT) layer, combined with in situ curing of a sliding SU-8 droplet, enables precise and independent tuning of a nanoslit-mold width and height using a single μCP master mold. The SU-8 nanoslit-mold is replicated using a hard-soft composite PDMS to prevent channel collapse at low (<0.2) aspect ratio (height over width). The fluidic characteristics as well as dimensions of nanoslits fabricated with various conditions are analyzed using a fluorescein sample and AFM images. Finally, concentration polarization-based sample preconcentration is successfully demonstrated at the nanoslit boundary where an electric double-layer is overlapped.

Unbound motion on a Schwarzschild background: Practical approaches to frequency domain computations

NASA Astrophysics Data System (ADS)

Hopper, Seth

2018-03-01

Gravitational perturbations due to a point particle moving on a static black hole background are naturally described in Regge-Wheeler gauge. The first-order field equations reduce to a single master wave equation for each radiative mode. The master function satisfying this wave equation is a linear combination of the metric perturbation amplitudes with a source term arising from the stress-energy tensor of the point particle. The original master functions were found by Regge and Wheeler (odd parity) and Zerilli (even parity). Subsequent work by Moncrief and then Cunningham, Price and Moncrief introduced new master variables which allow time domain reconstruction of the metric perturbation amplitudes. Here, I explore the relationship between these different functions and develop a general procedure for deriving new higher-order master functions from ones already known. The benefit of higher-order functions is that their source terms always converge faster at large distance than their lower-order counterparts. This makes for a dramatic improvement in both the speed and accuracy of frequency domain codes when analyzing unbound motion.

Utilities for master source code distribution: MAX and Friends

NASA Technical Reports Server (NTRS)

Felippa, Carlos A.

1988-01-01

MAX is a program for the manipulation of FORTRAN master source code (MSC). This is a technique by which one maintains one and only one master copy of a FORTRAN program under a program developing system, which for MAX is assumed to be VAX/VMS. The master copy is not intended to be directly compiled. Instead it must be pre-processed by MAX to produce compilable instances. These instances may correspond to different code versions (for example, double precision versus single precision), different machines (for example, IBM, CDC, Cray) or different operating systems (i.e., VAX/VMS versus VAX/UNIX). The advantage os using a master source is more pronounced in complex application programs that are developed and maintained over many years and are to be transported and executed on several computer environments. The version lag problem that plagues many such programs is avoided by this approach. MAX is complemented by several auxiliary programs that perform nonessential functions. The ensemble is collectively known as MAX and Friends. All of these programs, including MAX, are executed as foreign VAX/VMS commands and can easily be hidden in customized VMS command procedures.

Parylene C coating for high-performance replica molding.

PubMed

Heyries, Kevin A; Hansen, Carl L

2011-12-07

This paper presents an improvement to the soft lithography fabrication process that uses chemical vapor deposition of poly(chloro-p-xylylene) (parylene C) to protect microfabricated masters and to improve the release of polymer devices following replica molding. Chemical vapor deposition creates nanometre thick conformal coatings of parylene C on silicon wafers having arrays of 30 μm high SU8 pillars with densities ranging from 278 to 10,040 features per mm(2) and aspect ratios (height : width) from 1 : 1 to 6 : 1. A single coating of parylene C was sufficient to permanently promote poly(dimethyl)siloxane (PDMS) mold release and to protect masters for an indefinite number of molding cycles. We also show that the improved release properties of parylene treated masters allow for fabrication with hard polymers, such as poly(urethane), that would otherwise not be compatible with SU8 on silicon masters. Parylene C provides a robust and high performance mold release coating for soft lithography microfabrication that extends the life of microfabricated masters and improves the achievable density and aspect ratio of replicated features.

Fabrication of patterned surface by soft lithographic technique for confinement of lipid bilayer

NASA Astrophysics Data System (ADS)

Moulick, Ranjita Ghosh; Mayer, Dirk

2018-04-01

In this paper we demonstrated that a 3D pattern can be well transferred from a silicon Master to a gold substrate using µcontact printing. In this process 1-Octadecanthiol served as an ink and printing followed by etching generated the desired pattern on the gold substrate. The prepatterned substrate was also used for lipid vesicle fusion and revealed that lipid molecules selectively bind to the gold layer.

The Chandra Source Catalog : Automated Source Correlation

NASA Astrophysics Data System (ADS)

Hain, Roger; Evans, I. N.; Evans, J. D.; Glotfelty, K. J.; Anderson, C. S.; Bonaventura, N. R.; Chen, J. C.; Davis, J. E.; Doe, S. M.; Fabbiano, G.; Galle, E.; Gibbs, D. G.; Grier, J. D.; Hall, D. M.; Harbo, P. N.; He, X.; Houck, J. C.; Karovska, M.; Lauer, J.; McCollough, M. L.; McDowell, J. C.; Miller, J. B.; Mitschang, A. W.; Morgan, D. L.; Nichols, J. S.; Nowak, M. A.; Plummer, D. A.; Primini, F. A.; Refsdal, B. L.; Rots, A. H.; Siemiginowska, A. L.; Sundheim, B. A.; Tibbetts, M. S.; Van Stone, D. W.; Winkelman, S. L.; Zografou, P.

2009-01-01

Chandra Source Catalog (CSC) master source pipeline processing seeks to automatically detect sources and compute their properties. Since Chandra is a pointed mission and not a sky survey, different sky regions are observed for a different number of times at varying orientations, resolutions, and other heterogeneous conditions. While this provides an opportunity to collect data from a potentially large number of observing passes, it also creates challenges in determining the best way to combine different detection results for the most accurate characterization of the detected sources. The CSC master source pipeline correlates data from multiple observations by updating existing cataloged source information with new data from the same sky region as they become available. This process sometimes leads to relatively straightforward conclusions, such as when single sources from two observations are similar in size and position. Other observation results require more logic to combine, such as one observation finding a single, large source and another identifying multiple, smaller sources at the same position. We present examples of different overlapping source detections processed in the current version of the CSC master source pipeline. We explain how they are resolved into entries in the master source database, and examine the challenges of computing source properties for the same source detected multiple times. Future enhancements are also discussed. This work is supported by NASA contract NAS8-03060 (CXC).

[Adaptation of humans to walking in semi-hard and flexible space suits under terrestrial gravity].

PubMed

Panfilov, V E

2011-01-01

The spacesuit donning-on procedure can be viewed as the combining of two kinematic circuits into a single human-spacesuit functional system (HSS) for implementation of extravehicular operations. Optimal human-spacesuit interaction hinges on controllability and coordination of HSS mobile components, and also spacesuit slaving to the central nervous system (CNS) mediated through the human locomotion apparatus. Analysis of walking patterns in semi-hard and flexible spacesuits elucidated the direct and feedback relations between the external (spacesuit) and external (locomotion apparatus and CNS) circuits Lack of regularity in the style of spacesuit design creates difficulties for the direct CNS control of locomotion. Consequently, it is necessary to modify the locomotion command program in order to resolve these difficulties and to add flexibility to CNS control The analysis also helped trace algorithm of program modifications with the ultimate result of induced (forced) walk optimization. Learning how to walk in spacesuit Berkut requires no more than 2500 single steps, whereas about 300 steps must be made to master walk skills in spacesuit SKV.

Integrating Single-System Design Research into the Clinical Practice Class

ERIC Educational Resources Information Center

Cooper, Marlene G.

2006-01-01

Clinical practice and research are generally taught separately in Master of Social Work programs by faculty with distinct areas of expertise. This paper discusses the teaching of single-subject design research methodology by clinical faculty, in the clinical practice class. Examples from student papers demonstrate the effectiveness of integrating…

Systems and Algorithms for Automated Collaborative Observation Using Networked Robotic Cameras

ERIC Educational Resources Information Center

Xu, Yiliang

2011-01-01

The development of telerobotic systems has evolved from Single Operator Single Robot (SOSR) systems to Multiple Operator Multiple Robot (MOMR) systems. The relationship between human operators and robots follows the master-slave control architecture and the requests for controlling robot actuation are completely generated by human operators. …

Progress in Electron Beam Mastering of 100 Gbit/inch2 Density Disc

NASA Astrophysics Data System (ADS)

Takeda, Minoru; Furuki, Motohiro; Yamamoto, Masanobu; Shinoda, Masataka; Saito, Kimihiro; Aki, Yuichi; Kawase, Hiroshi; Koizumi, Mitsuru; Miyokawa, Toshiaki; Mutou, Masao; Handa, Nobuo

2004-07-01

We developed an electron beam recorder (EBR) capable of recording master discs under atmospheric conditions using a novel differential pumping head. Using the EBR and optimized fabrication process for Si-etched discs with reactive ion etching (RIE), a bottom signal jitter of 9.6% was obtained from a 36 Gbit/inch2 density disc, readout using a near-field optical pickup with an effective numerical aperture (NA) of 1.85 and a wavelength of 405 nm. We also obtained the eye patterns from a 70 Gbit/inch2 density disc readout using an optical pickup with a 2.05 NA and the same wavelength, and showed almost the same modulation ratio as the simulation value. Moreover, the capability of producing pit patterns corresponding to a 104 Gbit/inch2 density is demonstrated.

Detailed Balance of Thermalization Dynamics in Rydberg-Atom Quantum Simulators.

PubMed

Kim, Hyosub; Park, YeJe; Kim, Kyungtae; Sim, H-S; Ahn, Jaewook

2018-05-04

Dynamics of large complex systems, such as relaxation towards equilibrium in classical statistical mechanics, often obeys a master equation that captures essential information from the complexities. Here, we find that thermalization of an isolated many-body quantum state can be described by a master equation. We observe sudden quench dynamics of quantum Ising-like models implemented in our quantum simulator, defect-free single-atom tweezers in conjunction with Rydberg-atom interaction. Saturation of their local observables, a thermalization signature, obeys a master equation experimentally constructed by monitoring the occupation probabilities of prequench states and imposing the principle of the detailed balance. Our experiment agrees with theories and demonstrates the detailed balance in a thermalization dynamics that does not require coupling to baths or postulated randomness.

Detailed Balance of Thermalization Dynamics in Rydberg-Atom Quantum Simulators

NASA Astrophysics Data System (ADS)

Kim, Hyosub; Park, YeJe; Kim, Kyungtae; Sim, H.-S.; Ahn, Jaewook

2018-05-01

Dynamics of large complex systems, such as relaxation towards equilibrium in classical statistical mechanics, often obeys a master equation that captures essential information from the complexities. Here, we find that thermalization of an isolated many-body quantum state can be described by a master equation. We observe sudden quench dynamics of quantum Ising-like models implemented in our quantum simulator, defect-free single-atom tweezers in conjunction with Rydberg-atom interaction. Saturation of their local observables, a thermalization signature, obeys a master equation experimentally constructed by monitoring the occupation probabilities of prequench states and imposing the principle of the detailed balance. Our experiment agrees with theories and demonstrates the detailed balance in a thermalization dynamics that does not require coupling to baths or postulated randomness.

A laboratory investigation of the accuracy of the repositioning impression coping technique at the implant level for single-tooth implants.

PubMed

Daoudi, M Firas; Setchell, Derrick J; Searson, Lloyd J

2003-03-01

This study investigated the accuracy of the repositioning impression technique at the implant level using vinyl polysiloxane impression material. Three groups each of ten senior dentists, postgraduate students and technicians were asked to use this technique to record the position of an implant in a master model. The Reflex Microscope was used to measure variations between the resulting casts and the master model. Significant difference between the casts and the master model in the X and Y-axes (p < 0.01) was recorded. Alarming inclinational and rotational errors for the implant analogue position were measured with all groups of operators. Similar distortion in the Z-axis was recorded.

PATTERN PRACTICE IN THE TEACHING OF STANDARD ENGLISH TO STUDENTS WITH A NON-STANDARD DIALECT.

ERIC Educational Resources Information Center

LIN, SAN-SU C.

THE EXTENT TO WHICH PATTERN PRACTICE TECHNIQUES HELPED NEGRO STUDENTS WHO NEEDED TO MASTER STANDARD ENGLISH AS A SECOND LANGUAGE WAS INVESTIGATED. MATERIALS AND PROCEDURES TO IMPLEMENT SUCH TECHNIQUES WERE WORKED OUT. THE SUBJECTS ATTENDED CLAFLIN COLLEGE, AN ALL-NEGRO 4-YEAR COLLEGE IN SOUTH CAROLINA. APPROXIMATELY 65 TO 70 FRESHMEN WERE PLACED…

Economic Development Planning for Single Parents. Curriculum Materials for Vocational Teachers of Adolescents and Single Parents. Special Emphasis on Meeting the Needs of the Teen Parent.

ERIC Educational Resources Information Center

Simpson, Kawanna J.; And Others

This guide is intended for use in school-based intervention programs intended to help single parents (particularly teenagers who are expecting or already have a child) master basic money management and consumer skills. The guide is divided into sections dealing with the following topics: interpersonal relationships, value clarification,…

Developmental Dissociation in the Neural Responses to Simple Multiplication and Subtraction Problems

ERIC Educational Resources Information Center

Prado, Jérôme; Mutreja, Rachna; Booth, James R.

2014-01-01

Mastering single-digit arithmetic during school years is commonly thought to depend upon an increasing reliance on verbally memorized facts. An alternative model, however, posits that fluency in single-digit arithmetic might also be achieved via the increasing use of efficient calculation procedures. To test between these hypotheses, we used a…

Reflections of Single Turkish International Graduate Students: Studies on Life at a Midwestern University

ERIC Educational Resources Information Center

Burkholder, Jessica Reno

2010-01-01

The research was guided by the research question: How do full-time single Turkish international graduate students conceptualize their experiences as international students? Participants in the study included three doctoral students and three master's students who participated in a series of semi-structured interviews. The data was transcribed and…

Single Mothers Following Separation and Divorce: Making It on Your Own.

ERIC Educational Resources Information Center

Johnson, Brenda Hayes

1986-01-01

Identifies three workshop series which address the developmental needs of single parents to form a new identity and master the adjustment process, to interact with their children in a positive parenting role, and to form new relationships after divorce. Specific guidelines and materials are discussed to facilitate the first of these programs…

Injection locking of violet laser diodes with a 3.2 GHz offset frequency for driving Raman transitions in 43Ca+.

PubMed

Keitch, B C; Thomas, N R; Lucas, D M

2013-03-15

Two cw single-mode violet (397 nm) diode lasers are locked to a single external-cavity master diode laser by optical injection locking. A double-pass 1.6 GHz acousto-optic modulator is used to provide a 3.2 GHz offset frequency between the two slave lasers. We achieve up to 20 mW usable output in each slave beam, with as little as 25 μW of injection power at room temperature. An optical heterodyne measurement of the beat note between the two slave beams gives a linewidth of ≤10 Hz at 3.2 GHz. We also estimate the free-running linewidth of the master laser to be approximately 3 MHz by optical heterodyning with a similar device.

Terahertz master-oscillator power-amplifier quantum cascade laser with a grating coupler of extremely low reflectivity.

PubMed

Zhu, Huan; Zhu, Haiqing; Wang, Fangfang; Chang, Gaolei; Yu, Chenren; Yan, Quan; Chen, Jianxin; Li, Lianhe; Davies, A Giles; Linfield, Edmund H; Tang, Zhou; Chen, Pingping; Lu, Wei; Xu, Gangyi; He, Li

2018-01-22

A terahertz master-oscillation power-amplifier quantum cascade laser (THz-MOPA-QCL) is demonstrated where a grating coupler is employed to efficiently extract the THz radiation. By maximizing the group velocity and eliminating the scattering of THz wave in the grating coupler, the residue reflectivity is reduced down to the order of 10 -3 . A buried DFB grating and a tapered preamplifier are proposed to improve the seed power and to reduce the gain saturation, respectively. The THz-MOPA-QCL exhibits single-mode emission, a single-lobed beam with a narrow divergence angle of 18° × 16°, and a pulsed output power of 136 mW at 20 K, which is 36 times that of a second-order DFB laser from the same material.

Design and Fabrication of Aspheric Microlens Array for Optical Read-Only-Memory Card System

NASA Astrophysics Data System (ADS)

Kim, Hongmin; Jeong, Gibong; Kim, Young‑Joo; Kang, Shinill

2006-08-01

An optical head based on the Talbot effect with an aspheric microlens array for an optical read-only-memory (ROM) card system was designed and fabricated. The mathematical expression for the wavefield diffracted by a periodic microlens array showed that the amplitude distribution at the Talbot plane from the focal plane of the microlens array was identically equal to that at the focal plane. To use a reflow microlens array as a master pattern of an ultraviolet-imprinted (UV-imprinted) microlens array, the reflow microlens was defined as having an aspheric shape. To obtain optical probes with good optical qualities, a microlens array with the minimum spherical aberration was designed by ray tracing. The reflow condition was optimized to realize the master pattern of a microlens with a designed aspheric shape. The intensity distribution of the optical probes at the Talbot plane from the focal plane showed a diffraction-limited shape.

A comparison of control modes for time-delayed remote manipulation

NASA Technical Reports Server (NTRS)

Starr, G. P.

1982-01-01

Transmission time delay in the communication channel of a manual control system is investigated. A time delay can exist in remote manipulation systems, caused by long communication distances or bandwidth limitations. Ferrell 1 conducted the first research in time-delayed manipulation using a two degree-of-freedom manipulator. His subjects, working at time delays of 1.0, 2.1, and 3.2 s, could accomplish tasks even requiring great accuracy. The subjects spontaneously adopted a pattern of moving cautiously, then waiting to see the results of their actions. In experiments with a six degree-of-freedom master-slave manipulator system and time delays of 1.0 to 6 s, Black 2 saw that subjects tried to use the move-and-wait strategy; but there were often difficulties. The subjects seemed to have a problem in holding the master arm stationary while waiting for feedback. Any undesired drifting of the master arm introduced a discrepancy between the positions of the master and slave. This discrepancy was not perceived because of the time delay. The subject would then begin his next move with an inherent error. The difficulty of effectively using the move-and-wait strategy with a master-slave manipulator suggested that rate control might be a more effective control mode with time delay.

Single shot FASTBUS sequencer

NASA Astrophysics Data System (ADS)

Ikeda, H.

1989-10-01

A description is given of a single-shot sequencer, a FASTBUS master module that can execute only a predetermined FASTBUS WRITE operation. The execution cycle is directly activated by an external signal. The module is a single-width auxiliary card mounted on a rear slot adjacent to the crate ancillary card. The application of the module to the TOPAZ data acquisition system of TRISTAN is discussed, and the circuit itself is described.

Repurposing compact discs as master molds to fabricate high-performance organic nanowire field-effect transistors

NASA Astrophysics Data System (ADS)

Kim, Kyunghun; Cho, Jinhwi; Jhon, Heesauk; Jeon, Jongwook; Kang, Myounggon; Eon Park, Chan; Lee, Jihoon; An, Tae Kyu

2017-05-01

Organic field-effect transistors (OFETs) have been developed over the past few decades due to their potential applications in future electronics such as wearable and foldable electronics. As the electrical performance of OFETs has improved, patterning organic semiconducting crystals has become a key issue for their commercialization. However, conventional soft lithographic techniques have required the use of expensive processes to fabricate high-resolution master molds. In this study, we demonstrated a cost-effective method to prepare nanopatterned master molds for the fabrication of high-performance nanowire OFETs. We repurposed commercially available compact discs (CDs) as master molds because they already have linear nanopatterns on their surface. Flexible nanopatterned templates were replicated from the CDs using UV-imprint lithography. Subsequently, 6,13-bis-(triisopropylsilylethynyl) pentacene nanowires (NWs) were grown from the templates using a capillary force-assisted lithographic technique. The NW-based OFETs showed a high average field-effect mobility of 2.04 cm2 V-1 s-1. This result was attributed to the high crystallinity of the NWs and to their crystal orientation favorable for charge transport.

The effect of using an inverted master cone in a lateral compaction technique on the density of the gutta-percha fill.

PubMed

Wu, Min-Kai; de Groot, Sjoerd D; van der Sluis, Luc W M; Wesselink, Paul R

2003-09-01

We sought to measure and calculate the percentage of the gutta-percha-filled area in the apical root canal after the use of a standardized or inverted master cone in cold lateral compaction.Study design Two groups of extracted mandibular premolars with a single canal were instrumented with instruments of the same size; furthermore, they were obturated with laterally compacted gutta-percha cones with AH26 used as a sealer. In the first group, a standardized master cone was used with its narrow end in an apical position, whereas in the other group, an inverted master cone was used with its wide end in an apical position. The 2 master cones had the same apical diameter and fit in the apical canal. After lateral compaction, horizontal sections were cut at a level 3 and 5 mm from the apex of each filled tooth. Photographs of the sections were taken by using a microscope equipped with a digital camera; the photos were then scanned as tagged-image file format images. The cross-sectional area of the canal and the gutta-percha were measured by using an image-analysis program. The percentage of gutta-percha-filled area was calculated. At both levels, the inverted master cone produced a significantly higher percentage, statistically, of gutta-percha-filled area than did the standardized master cone (P =.001 at 3 mm; P =.012 at 5 mm). The use of an inverted master cone in cold lateral compaction may facilitate the apical placement of accessory cones, significantly increasing the volume of gutta-percha while reducing the volume of sealer in the apical root canal.

Evaluating four-loop conformal Feynman integrals by D-dimensional differential equations

NASA Astrophysics Data System (ADS)

Eden, Burkhard; Smirnov, Vladimir A.

2016-10-01

We evaluate a four-loop conformal integral, i.e. an integral over four four-dimensional coordinates, by turning to its dimensionally regularized version and applying differential equations for the set of the corresponding 213 master integrals. To solve these linear differential equations we follow the strategy suggested by Henn and switch to a uniformly transcendental basis of master integrals. We find a solution to these equations up to weight eight in terms of multiple polylogarithms. Further, we present an analytical result for the given four-loop conformal integral considered in four-dimensional space-time in terms of single-valued harmonic polylogarithms. As a by-product, we obtain analytical results for all the other 212 master integrals within dimensional regularization, i.e. considered in D dimensions.

Activities.

ERIC Educational Resources Information Center

Mathematics Teacher, 1982

1982-01-01

The material presented is designed to help students explore geometric patterns involving Fibonnaci numbers and the golden ratio, and to aid in review of basic geometry skills. Worksheet masters intended for duplication are provided. Suggestions are made of possible classroom extensions to the initial activities. (MP)

Co-Located Collaborative Learning Video Game with Single Display Groupware

ERIC Educational Resources Information Center

Infante, Cristian; Weitz, Juan; Reyes, Tomas; Nussbaum, Miguel; Gomez, Florencia; Radovic, Darinka

2010-01-01

Role Game is a co-located CSCL video game played by three students sitting at one machine sharing a single screen, each with their own input device. Inspired by video console games, Role Game enables students to learn by doing, acquiring social abilities and mastering subject matter in a context of co-located collaboration. After describing the…

Techniques for reducing and/or eliminating secondary modes in a dye laser oscillator

DOEpatents

Hackel, Richard P.

1988-01-01

A dye laser master oscillator is disclosed herein. This oscillator is intended to provide a single mode output, that is, a primary beam of light of a specific wavelength, but also has the tendency to provide secondary modes, that is, secondary beams of light at different wavelengths and slightly off-axis with respect to the primary beam as a result of grazing incident reflections within the dye cell forming part of the master oscillator. Also disclosed herein are a number of different techniques for reducing or eliminating these secondary modes.

High-power arrays of quantum cascade laser master-oscillator power-amplifiers.

PubMed

Rauter, Patrick; Menzel, Stefan; Goyal, Anish K; Wang, Christine A; Sanchez, Antonio; Turner, George; Capasso, Federico

2013-02-25

We report on multi-wavelength arrays of master-oscillator power-amplifier quantum cascade lasers operating at wavelengths between 9.2 and 9.8 μm. All elements of the high-performance array feature longitudinal (spectral) as well as transverse single-mode emission at peak powers between 2.7 and 10 W at room temperature. The performance of two arrays that are based on different seed-section designs is thoroughly studied and compared. High output power and excellent beam quality render the arrays highly suitable for stand-off spectroscopy applications.

So, Here's the Story

ERIC Educational Resources Information Center

Columba, Lynn

2013-01-01

Mathematics is about reasoning, patterns, and making sense of things. Children's literature provides a powerful opportunity to foster unique experiences in mathematics learning. Storybooks, thinking strategies, and manipulatives offer a winning combination for mastering multiplication facts based on conceptual ideas and relationships. The most…

Telerobotic control of a dextrous manipulator using master and six-DOF hand-controllers for space assembly and servicing tasks

NASA Technical Reports Server (NTRS)

O'Hara, John M.

1987-01-01

Two studies were conducted evaluating methods of controlling a telerobot; bilateral force reflecting master controllers and proportional rate six degrees of freedom (DOF) hand controllers. The first study compared the controllers on performance of single manipulator arm tasks, a peg-in-the-hole task, and simulated satellite orbital replacement unit changeout. The second study, a Space Station truss assembly task, required simultaneous operation of both manipulator arms (all 12 DOFs) and complex multiaxis slave arm movements. Task times were significantly longer and fewer errors were committed with the hand controllers. The hand controllers were also rated significantly higher in cognitive and manual control workload on the two-arm task. The master controllers were rated significantly higher in physical workload. There were no significant differences in ratings of manipulator control quality.

Application of a Genetic Algorithm and Multi Agent System to Explore Emergent Patterns of Social Rationality and a Distress-Based Model for Deceit in the Workplace

DTIC Science & Technology

2008-06-01

postponed the fulfillment of her own Masters Degree by at least 18 months so that I would have the opportunity to earn mine. She is smart , lovely...GENETIC ALGORITHM AND MULTI AGENT SYSTEM TO EXPLORE EMERGENT PATTERNS OF SOCIAL RATIONALITY AND A DISTRESS-BASED MODEL FOR DECEIT IN THE WORKPLACE...of a Genetic Algorithm and Mutli Agent System to Explore Emergent Patterns of Social Rationality and a Distress-Based Model for Deceit in the

Number of Repetitions Required to Retain Single-Digit Multiplication Math Facts for Elementary Students

ERIC Educational Resources Information Center

Burns, Matthew K.; Ysseldyke, Jim; Nelson, Peter M.; Kanive, Rebecca

2015-01-01

Computational fluency is an important aspect of math proficiency. Despite widely held beliefs about the differential difficulty of single-digit multiplication math facts, little empirical work has examined this issue. The current study analyzed the number of repetitions needed to master multiplication math facts. Data from 15,402 3rd, 4th, and 5th…

Children Who Desperately Want To Read, but Are Not Working at Grade Level: Use Movement Patterns as "Windows" To Discover Why. Part III: The Frontal Midline.

ERIC Educational Resources Information Center

Corso, Marjorie

A longitudinal research study observed 30 children between the ages of infancy and elementary age to determine if using large muscle motor patterns to master the three identified midlines that concur with the body planes used in anatomy is reflected in academic classroom learning levels. This third part of the study focused on the frontal midline.…

Dissecting Embryonic Stem Cell Self-Renewal and Differentiation Commitment from Quantitative Models.

PubMed

Hu, Rong; Dai, Xianhua; Dai, Zhiming; Xiang, Qian; Cai, Yanning

2016-10-01

To model quantitatively embryonic stem cell (ESC) self-renewal and differentiation by computational approaches, we developed a unified mathematical model for gene expression involved in cell fate choices. Our quantitative model comprised ESC master regulators and lineage-specific pivotal genes. It took the factors of multiple pathways as input and computed expression as a function of intrinsic transcription factors, extrinsic cues, epigenetic modifications, and antagonism between ESC master regulators and lineage-specific pivotal genes. In the model, the differential equations of expression of genes involved in cell fate choices from regulation relationship were established according to the transcription and degradation rates. We applied this model to the Murine ESC self-renewal and differentiation commitment and found that it modeled the expression patterns with good accuracy. Our model analysis revealed that Murine ESC was an attractor state in culture and differentiation was predominantly caused by antagonism between ESC master regulators and lineage-specific pivotal genes. Moreover, antagonism among lineages played a critical role in lineage reprogramming. Our results also uncovered that the ordered expression alteration of ESC master regulators over time had a central role in ESC differentiation fates. Our computational framework was generally applicable to most cell-type maintenance and lineage reprogramming.

Bit-mapped Holograms Using Phase Transition Mastering (PTM) and Blu-ray Disks

NASA Astrophysics Data System (ADS)

Barnhart, Donald

2013-02-01

Due to recent advances made in data storage, cloud computing, and Blu-ray mastering technology, it is now straight forward to calculate, store, transfer, and print bitmapped holograms that use terabytes of data and tera-pixels of information. This presentation reports on the potential of using the phase transition mastering (PTM) process to construct bitmapped, computer generated holograms with spatial resolutions of 5000 line-pairs/mm (70 nm pixel width). In particular, for Blu-ray disk production, Sony has developed a complete process that could be alternately deployed in holographic applications. The PTM process uses a 405 nm laser to write phase patterns onto a layer of imperfect transition metal oxides that is deposited onto an 8 inch silicon wafer. After the master hologram has been constructed, its imprint can then be cheaply mass produced with the same process as Blu-ray disks or embossed holograms. Unlike traditional binary holograms made with expensive e-beam lithography, the PTM process has the potential for multiple phase levels using inexpensive optics similar to consumer-grade desktop Blu-ray writers. This PTM process could revolutionise holography for entertainment, industrial, and scientific applications.

Method and apparatus for timing of laser beams in a multiple laser beam fusion system

DOEpatents

Eastman, Jay M.; Miller, Theodore L.

1981-01-01

The optical path lengths of a plurality of comparison laser beams directed to impinge upon a common target from different directions are compared to that of a master laser beam by using an optical heterodyne interferometric detection technique. The technique consists of frequency shifting the master laser beam and combining the master beam with a first one of the comparison laser beams to produce a time-varying heterodyne interference pattern which is detected by a photo-detector to produce an AC electrical signal indicative of the difference in the optical path lengths of the two beams which were combined. The optical path length of this first comparison laser beam is adjusted to compensate for the detected difference in the optical path lengths of the two beams. The optical path lengths of all of the comparison laser beams are made equal to the optical path length of the master laser beam by repeating the optical path length adjustment process for each of the comparison laser beams. In this manner, the comparison laser beams are synchronized or timed to arrive at the target within .+-.1.times.10.sup.-12 second of each other.

Accuracy of six elastic impression materials used for complete-arch fixed partial dentures.

PubMed

Stauffer, J P; Meyer, J M; Nally, J N

1976-04-01

1. The accuracy of four types of impression materials used to make a complete-arch fixed partial denture was evaluated by visual comparison and indirect measurement methods. 2. None of the tested materials allows safe finishing of a complete-arch fixed partial denture on a cast poured from one single master impression. 3. All of the tested materials can be used for impressions for a complete-arch fixed partial denture provided it is not finished on one single cast. Errors can be avoided by making a new impression with the fitted castings in place. Assembly and soldering should be done on the second cast. 4. In making the master fixed partial denture for this study, inaccurate soldering was a problem that was overcome with the use of epoxy glue. Hence, soldering seems to be a major source of inaccuracy for every fixed partial denture.

Internal fit of single crowns produced by CAD-CAM and lost-wax metal casting technique assessed by the triple-scan protocol.

PubMed

Dahl, Bjørn Einar; Rønold, Hans Jacob; Dahl, Jon E

2017-03-01

Whether single crowns produced by computer-aided design and computer-aided manufacturing (CAD-CAM) have an internal fit comparable to crowns made by lost-wax metal casting technique is unknown. The purpose of this in vitro study was to compare the internal fit of single crowns produced with the lost-wax and metal casting technique with that of single crowns produced with the CAD-CAM technique. The internal fit of 5 groups of single crowns produced with the CAD-CAM technique was compared with that of single crowns produced in cobalt-chromium with the conventional lost-wax and metal casting technique. Comparison was performed using the triple-scan protocol; scans of the master model, the crown on the master model, and the intaglio of the crown were superimposed and analyzed with computer software. The 5 groups were milled presintered zirconia, milled hot isostatic pressed zirconia, milled lithium disilicate, milled cobalt-chromium, and laser-sintered cobalt-chromium. The cement space in both the mesiodistal and buccopalatal directions was statistically smaller (P<.05) for crowns made by the conventional lost-wax and metal casting technique compared with that of crowns produced by the CAD-CAM technique. Single crowns made using the conventional lost-wax and metal casting technique have better internal fit than crowns produced using the CAD-CAM technique. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Mapping of uncertainty relations between continuous and discrete time

NASA Astrophysics Data System (ADS)

Chiuchiú, Davide; Pigolotti, Simone

2018-03-01

Lower bounds on fluctuations of thermodynamic currents depend on the nature of time, discrete or continuous. To understand the physical reason, we compare current fluctuations in discrete-time Markov chains and continuous-time master equations. We prove that current fluctuations in the master equations are always more likely, due to random timings of transitions. This comparison leads to a mapping of the moments of a current between discrete and continuous time. We exploit this mapping to obtain uncertainty bounds. Our results reduce the quests for uncertainty bounds in discrete and continuous time to a single problem.

Mapping of uncertainty relations between continuous and discrete time.

PubMed

Chiuchiù, Davide; Pigolotti, Simone

2018-03-01

Lower bounds on fluctuations of thermodynamic currents depend on the nature of time, discrete or continuous. To understand the physical reason, we compare current fluctuations in discrete-time Markov chains and continuous-time master equations. We prove that current fluctuations in the master equations are always more likely, due to random timings of transitions. This comparison leads to a mapping of the moments of a current between discrete and continuous time. We exploit this mapping to obtain uncertainty bounds. Our results reduce the quests for uncertainty bounds in discrete and continuous time to a single problem.

Universal control and measuring system for modern classic and amorphous magnetic materials single/on-line strip testers

NASA Astrophysics Data System (ADS)

Zemánek, Ivan; Havlíček, Václav

2006-09-01

A new universal control and measuring system for classic and amorphous soft magnetic materials single/on-line strip testing has been developed at the Czech Technical University in Prague. The measuring system allows to measure magnetization characteristic and specific power losses of different tested materials (strips) at AC magnetization of arbitrary magnetic flux density waveform at wide range of frequencies 20 Hz-20 kHz. The measuring system can be used for both single strip testing in laboratories and on-line strip testing during the production process. The measuring system is controlled by two-stage master-slave control system consisting of the external PC (master) completed by three special A/D measuring plug-in boards, and local executing control unit (slave) with one-chip microprocessor 8051, connected with PC by the RS232 serial line. The "user friendly" powerful control software implemented on the PC and the effective program code for the microprocessor give possibility for full automatic measurement with high measuring power and high measuring accuracy.

Expertise in complex decision making: the role of search in chess 70 years after de Groot.

PubMed

Connors, Michael H; Burns, Bruce D; Campitelli, Guillermo

2011-01-01

One of the most influential studies in all expertise research is de Groot's (1946) study of chess players, which suggested that pattern recognition, rather than search, was the key determinant of expertise. Many changes have occurred in the chess world since de Groot's study, leading some authors to argue that the cognitive mechanisms underlying expertise have also changed. We decided to replicate de Groot's study to empirically test these claims and to examine whether the trends in the data have changed over time. Six Grandmasters, five International Masters, six Experts, and five Class A players completed the think-aloud procedure for two chess positions. Findings indicate that Grandmasters and International Masters search more quickly than Experts and Class A players, and that both groups today search substantially faster than players in previous studies. The findings, however, support de Groot's overall conclusions and are consistent with predictions made by pattern recognition models. Copyright © 2011 Cognitive Science Society, Inc.

Learning and mastery behaviours as risk factors to abandonment in a paediatric user of advanced single-switch access technology.

PubMed

Brian, Leung; Jessica A, Brian; Tom, Chau

2013-09-01

The present descriptive case study documents the behaviours of a child single-switch user in the community setting and draws attention to learning and mastery behaviours as risk factors to single-switch abandonment. Our observations were interpreted in the context of a longer term school-based evaluation of an advanced single-switch access technology with a nine year-old user with severe spastic quadriplegic cerebral palsy. The child completed 25 experiment sessions averaging a rate of three sessions every two weeks. During each session he worked on several blocks of single-switch computer activity using his vocal cord vibration switch. Despite high levels of single-switch sensitivity and specificity that suggested a good fit between the participant and the technology, the participant perceived a lower proficiency level of his own abilities, demonstrated impatience and intolerance to interaction errors, and was apprehensive of making mistakes when using his switch in public. The benefit of gaining some degree of independent physical access might not necessarily enhance resilience to interaction errors or bouts of poor task performance. On the other hand, the participant's behaviours were consistent with those of a typically developing child learning or mastering any new skill or task. Implications for Rehabilitation The attitude and behaviour of a paediatric switch user towards skill development can be risk factors to abandonment of an access technology, despite successful clinical trial with the device. Children with severe disabilities can be associated with the same types of skill development behaviour patterns and achievement motivation as their typically developing peers. Empirical observations of the case participant's switch use behaviours suggest that user training could be adaptive in order to account for individual differences in skill development and achievement motivation.

A Model for Semantic Equivalence Discovery for Harmonizing Master Data

NASA Astrophysics Data System (ADS)

Piprani, Baba

IT projects often face the challenge of harmonizing metadata and data so as to have a "single" version of the truth. Determining equivalency of multiple data instances against the given type, or set of types, is mandatory in establishing master data legitimacy in a data set that contains multiple incarnations of instances belonging to the same semantic data record . The results of a real-life application define how measuring criteria and equivalence path determination were established via a set of "probes" in conjunction with a score-card approach. There is a need for a suite of supporting models to help determine master data equivalency towards entity resolution—including mapping models, transform models, selection models, match models, an audit and control model, a scorecard model, a rating model. An ORM schema defines the set of supporting models along with their incarnation into an attribute based model as implemented in an RDBMS.

A novel control framework for nonlinear time-delayed dual-master/single-slave teleoperation.

PubMed

Ghorbanian, A; Rezaei, S M; Khoogar, A R; Zareinejad, M; Baghestan, K

2013-03-01

A novel trilateral control architecture for the Dual-master/Single-slave teleoperation is proposed in this paper. This framework has been used in surgical training and rehabilitation applications. In this structure, the slave motion has been controlled by weighted summation of signals transmitted by the operator referring to task control authority through the dominance factors. The nonlinear dynamics for telemanipulators are considered which were considered as disregarded issues in previous studies of this field. Bounded variable time-delay has been considered which affects the transmitted signals in the communication channels. Two types of controllers have been offered and an appropriate stability analysis for each controller has been demonstrated. The first controller includes Proportional with dissipative gains (P+d). The second one contains Proportional and Derivative with dissipative gains (PD+d). In both cases, the stability of the trilateral control framework is preserved by choosing appropriate controller's gains. It is shown that these controllers attempt to coordinate the positions of telemanipulators in the free motion condition. The stability of the Dual-master/Single-slave teleoperation has been proved by an appropriate Lyapunov like function and the stability conditions have been studied. In addition the proposed PD+d control architecture is modified for trilateral teleoperation with internet communication between telemanipulators that caused such communication complications as packet loss, data duplication and swapping. A number of experiments have been conducted with various levels of dominance factor to validate the effectiveness of the new control architecture. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

Multiple-Flat-Panel System Displays Multidimensional Data

NASA Technical Reports Server (NTRS)

Gundo, Daniel; Levit, Creon; Henze, Christopher; Sandstrom, Timothy; Ellsworth, David; Green, Bryan; Joly, Arthur

2006-01-01

The NASA Ames hyperwall is a display system designed to facilitate the visualization of sets of multivariate and multidimensional data like those generated in complex engineering and scientific computations. The hyperwall includes a 77 matrix of computer-driven flat-panel video display units, each presenting an image of 1,280 1,024 pixels. The term hyperwall reflects the fact that this system is a more capable successor to prior computer-driven multiple-flat-panel display systems known by names that include the generic term powerwall and the trade names PowerWall and Powerwall. Each of the 49 flat-panel displays is driven by a rack-mounted, dual-central-processing- unit, workstation-class personal computer equipped with a hig-hperformance graphical-display circuit card and with a hard-disk drive having a storage capacity of 100 GB. Each such computer is a slave node in a master/ slave computing/data-communication system (see Figure 1). The computer that acts as the master node is similar to the slave-node computers, except that it runs the master portion of the system software and is equipped with a keyboard and mouse for control by a human operator. The system utilizes commercially available master/slave software along with custom software that enables the human controller to interact simultaneously with any number of selected slave nodes. In a powerwall, a single rendering task is spread across multiple processors and then the multiple outputs are tiled into one seamless super-display. It must be noted that the hyperwall concept subsumes the powerwall concept in that a single scene could be rendered as a mosaic image on the hyperwall. However, the hyperwall offers a wider set of capabilities to serve a different purpose: The hyperwall concept is one of (1) simultaneously displaying multiple different but related images, and (2) providing means for composing and controlling such sets of images. In place of elaborate software or hardware crossbar switches, the hyperwall concept substitutes reliance on the human visual system for integration, synthesis, and discrimination of patterns in complex and high-dimensional data spaces represented by the multiple displayed images. The variety of multidimensional data sets that can be displayed on the hyperwall is practically unlimited. For example, Figure 2 shows a hyperwall display of surface pressures and streamlines from a computational simulation of airflow about an aerospacecraft at various Mach numbers and angles of attack. In this display, Mach numbers increase from left to right and angles of attack increase from bottom to top. That is, all images in the same column represent simulations at the same Mach number, while all images in the same row represent simulations at the same angle of attack. The same viewing transformations and the same mapping from surface pressure to colors were used in generating all the images.

The Language Teacher, 2002.

ERIC Educational Resources Information Center

Long, Robert, Ed.; Gardner, Scott, Ed.

2002-01-01

These 12 journal issues include articles on the following topics: cultural effects on learning and teaching English in Vietnam; a student guide to plagiarism; getting a master's degree in TEST at Temple University Japan; getting organized in Japan; conference reports; a discourse pattern for teaching the reminiscence story; student controlled…

Housing, health and master planning: rules of engagement.

PubMed

Harris, P; Haigh, F; Thornell, M; Molloy, L; Sainsbury, P

2014-04-01

Knowledge about health focussed policy collaboration to date has been either tactical or technical. This article focusses on both technical and tactical issues to describe the experience of cross-sectoral collaboration between health and housing stakeholders across the life of a housing master plan, including but not limited to a health impact assessment (HIA). A single explanatory case study of collaboration on a master plan to regenerate a deprived housing estate in Western Sydney was developed to explain why and how the collaboration worked or did not work. Data collection included stakeholder interviews, document review, and reflections by the health team. Following a realist approach, data was analysed against established public policy theory dimensions. Tactically we did not know what we were doing. Despite our technical knowledge and skills with health focussed processes, particularly HIA, we failed to appreciate complexities inherent in master planning. This limited our ability to provide information at the right points. Eventually however the HIA did provide substantive connections between the master plan and health. We use our analysis to develop technical and tactical rules of engagement for future cross-sectoral collaboration. This case study from the field provides insight for future health focussed policy collaboration. We demonstrate the technical and tactical requirements for future intersectoral policy and planning collaborations, including HIAs, with the housing sector on master planning. The experience also suggested how HIAs can be conducted flexibly alongside policy development rather than at a specific point after a policy is drafted. Copyright © 2014 The Royal Society for Public Health. All rights reserved.

A comparative scanning electron microscopic study of the effect of three different rotary instruments on smear layer formation.

PubMed

Shahi, Shahriar; Yavari, Hamid R; Rahimi, Saeed; Reyhani, Mohammad F; Kamarroosta, Zahra; Abdolrahimi, Majid

2009-03-01

The aim of this study was to evaluate the effect of RaCe, FlexMaster and ProFile rotary instruments on smear layer formation by scanning electron microscopy. Eighty-four caries-free freshly extracted human single-rooted teeth were selected and divided into three groups, each containing 28 teeth. The teeth were instrumented with rotary instruments sequentially: Group A: ProFile Rotary Instruments; Group B: FlexMaster Rotary Instruments; and Group C: RaCe Rotary Instruments. Instrumentation was performed by the crown-down method and according to the manufacturer's instructions. The specimens were then examined with SEM according to Hülsmann's classification. One-way ANOVA and a post hoc Tukey test were used for statistical analysis. The results showed that there were no statistically significant differences among the three groups in the coronal third (P = 0.39), but at the apical and middle thirds there were statistically significant differences between the RaCe group and the other groups (P < 0.05). Smear layer in the RaCe group was less than that in the ProFile and FlexMaster groups, but the difference between the ProFile group and FlexMaster group was not statistically significant (P > 0.05). It was concluded that RaCe Rotary Instruments produce less smear layer than FlexMaster and ProFile Rotary Instruments.

Using core competencies to build an evaluative framework: outcome assessment of the University of Guelph Master of Public Health program.

PubMed

Britten, Nicole; Wallar, Lauren E; McEwen, Scott A; Papadopoulos, Andrew

2014-07-31

Master of Public Health programs have been developed across Canada in response to the need for graduate-level trained professionals to work in the public health sector. The University of Guelph recently conducted a five-year outcome assessment using the Core Competencies for Public Health in Canada as an evaluative framework to determine whether graduates are receiving adequate training, and identify areas for improvement. A curriculum map of core courses and an online survey of University of Guelph Master of Public Health graduates comprised the outcome assessment. The curriculum map was constructed by evaluating course outlines, assignments, and content to determine the extent to which the Core Competencies were covered in each course. Quantitative survey results were characterized using descriptive statistics. Qualitative survey results were analyzed to identify common themes and patterns in open-ended responses. The University of Guelph Master of Public Health program provided a positive learning environment in which graduates gained proficiency across the Core Competencies through core and elective courses, meaningful practicums, and competent faculty. Practice-based learning environments, particularly in collaboration with public health organizations, were deemed to be beneficial to students' learning experiences. The Core Competencies and graduate surveys can be used to conduct a meaningful and informative outcome assessment. We encourage other Master of Public Health programs to conduct their own outcome assessments using a similar framework, and disseminate these results in order to identify best practices and strengthen the Canadian graduate public health education system.

EPA FRS Facilities Single File CSV Download for the Marshall Islands

EPA Pesticide Factsheets

The Facility Registry System (FRS) identifies facilities, sites, or places subject to environmental regulation or of environmental interest to EPA programs or delegated states. Using vigorous verification and data management procedures, FRS integrates facility data from program national systems, state master facility records, tribal partners, and other federal agencies and provides the Agency with a centrally managed, single source of comprehensive and authoritative information on facilities.

Early Career Patterns for Social Work Graduates

ERIC Educational Resources Information Center

Choi, Mi Jin; Urbanski, Paul; Fortune, Anne E.; Rogers, Crystal

2015-01-01

This study examines master's of social work graduates' early careers. Six cohorts graduating from 2002 through 2007 (N = 246) completed a questionnaire 9-15 months after graduation. Most reported adequate or exceptional preparation on both generalist and advanced concentration practice behaviors. Almost all direct practice graduates and 2/3 of…

CogSkillnet: An Ontology-Based Representation of Cognitive Skills

ERIC Educational Resources Information Center

Askar, Petek; Altun, Arif

2009-01-01

A number of studies emphasized the need to capture learners' interaction patterns in order to personalize their learning process as they study through learning objects. In education context, learning materials are designed based on pre-determined expectations and learners are evaluated to what extent they master these expectations. Representation…

Teacher Supply in Hong Kong: Educational Qualifications and Growth.

ERIC Educational Resources Information Center

Chung, Yue-ping; Hung, Fan-sing

This paper explores Hong Kong secondary teacher supply patterns related to teacher retention using data collected from 1991-99. Secondary teachers are classified into five categories by initial educational qualifications: registered Graduate Master (trained GM), who are university graduates with majors in a subject discipline; permitted Graduate…

Phonetic Diversity, Statistical Learning, and Acquisition of Phonology

ERIC Educational Resources Information Center

Pierrehumbert, Janet B.

2003-01-01

In learning to perceive and produce speech, children master complex language-specific patterns. Daunting language-specific variation is found both in the segmental domain and in the domain of prosody and intonation. This article reviews the challenges posed by results in phonetic typology and sociolinguistics for the theory of language…

Technology of combined chemical-mechanical fabrication of durable coatings

NASA Astrophysics Data System (ADS)

Smolentsev, V. P.; Ivanov, V. V.; Portnykh, A. I.

2018-03-01

The article presents the scientific fundamentals of methodology for calculating the modes and structuring the technological processes of combined chemical-mechanical fabrication of durable coatings. It is shown that they are based on classical patterns, describing the processes of simultaneous chemical and mechanical impact. The paper demonstrates the possibility of structuring a technological process, taking into account the systematic approach to impact management and strengthening the reciprocal positive influence of each impact upon the combined process. The combined processes have been planned for fabricating the model types of chemical-mechanical coatings of durable products in machine construction. The planning methodology is underpinned by a scientific hypothesis of a single source of impact management through energy potential of process components themselves, or by means of external energy supply through mechanical impact. The control of it is fairly thoroughly studied in the case of pulsed external strikes of hard pellets, similar to processes of vibroimpact hardening, thoroughly studied and mastered in many scientific schools of Russia.

Universal features of fluctuations in globular proteins.

PubMed

Erman, Burak

2016-06-01

Using data from 2000 non-homologous protein crystal structures, we show that the distribution of residue B factors of proteins collapses onto a single master curve. We show by maximum entropy arguments that this curve is a Gamma function whose order and dispersion are obtained from experimental data. The distribution for any given specific protein can be generated from the master curve by a linear transformation. Any perturbation of the B factor distribution of a protein, imposed at constant energy, causes a decrease in the entropy of the protein relative to that of the reference state. Proteins 2016; 84:721-725. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Remote detection of water stress in orchard canopies using MODIS/ASTER airborne simulator (MASTER) data

NASA Astrophysics Data System (ADS)

Cheng, Tao; Riaño, David; Koltunov, Alexander; Whiting, Michael L.; Ustin, Susan L.

2011-09-01

Vegetation canopy water content (CWC) is an important parameter for monitoring natural and agricultural ecosystems. Previous studies focused on the observation of annual or monthly variations in CWC but lacked temporal details to study vegetation physiological activities within a diurnal cycle. This study provides an evaluation of detecting vegetation diurnal water stress using airborne data acquired with the MASTER instrument. Concurrent with the morning and afternoon acquisitions of MASTER data, an extensive field campaign was conducted over almond and pistachio orchards in southern San Joaquin Valley of California to collect CWC measurements. Statistical analysis of the field measurements indicated a significant decrease of CWC from morning to afternoon. Field measured CWC was linearly correlated to the normalized difference infrared index (NDII) calculated with atmospherically corrected MASTER reflectance data using either FLAASH or empirical line (EL). Our regression analysis demonstrated that both atmospheric corrections led to a root mean square error (RMSE) of approximately 0.035 kg/m2 for the estimation of CWC (R2=0.42 for FLAASH images and R2=0.45 for EL images). Remote detection of the subtle decline in CWC awaits an improved prediction of CWC. Diurnal CWC maps revealed the spatial patterns of vegetation water status in response to variations in irrigation treatment.

Synoptic evaluation of scale-dependent metrics for hydrographic line feature geometry

USGS Publications Warehouse

Stanislawski, Larry V.; Buttenfield, Barbara P.; Raposo, Paulo; Cameron, Madeline; Falgout, Jeff T.

2015-01-01

Methods of acquisition and feature simplification for vector feature data impact cartographic representations and scientific investigations of these data, and are therefore important considerations for geographic information science (Haunert and Sester 2008). After initial collection, linear features may be simplified to reduce excessive detail or to furnish a reduced-scale version of the features through cartographic generalization (Regnauld and McMaster 2008, Stanislawski et al. 2014). A variety of algorithms exist to simplify linear cartographic features, and all of the methods affect the positional accuracy of the features (Shahriari and Tao 2002, Regnauld and McMaster 2008, Stanislawski et al. 2012). In general, simplification operations are controlled by one or more tolerance parameters that limit the amount of positional change the operation can make to features. Using a single tolerance value can have varying levels of positional change on features; depending on local shape, texture, or geometric characteristics of the original features (McMaster and Shea 1992, Shahriari and Tao 2002, Buttenfield et al. 2010). Consequently, numerous researchers have advocated calibration of simplification parameters to control quantifiable properties of resulting changes to the features (Li and Openshaw 1990, Raposo 2013, Tobler 1988, Veregin 2000, and Buttenfield, 1986, 1989).This research identifies relations between local topographic conditions and geometric characteristics of linear features that are available in the National Hydrography Dataset (NHD). The NHD is a comprehensive vector dataset of surface 18 th ICA Workshop on Generalisation and Multiple Representation, Rio de Janiero, Brazil 2015 2 water features within the United States that is maintained by the U.S. Geological Survey (USGS). In this paper, geometric characteristics of cartographic representations for natural stream and river features are summarized for subbasin watersheds within entire regions of the conterminous United States and compared to topographic metrics. A concurrent processing workflow is implemented using a Linux high-performance computing cluster to simultaneously process multiple subbasins, and thereby complete the work in a fraction of the time required for a single-process environment. In addition, similar metrics are generated for several levels of simplification of the hydrographic features to quantify the effects of simplification over the various landscape conditions. Objectives of this exploratory investigation are to quantify geometric characteristics of linear hydrographic features over the various terrain conditions within the conterminous United States and thereby illuminate relations between stream geomorphological conditions and cartographic representation. The synoptic view of these characteristics over regional watersheds that is afforded through concurrent processing, in conjunction with terrain conditions, may reveal patterns for classifying cartographic stream features into stream geomorphological classes. Furthermore, the synoptic measurement of the amount of change in geometric characteristics caused by the several levels of simplification can enable estimation of tolerance values that appropriately control simplification-induced geometric change of the cartographic features within the various geomorphological classes in the country. Hence, these empirically derived rules or relations could help generate multiscale-representations of features through automated generalization that adequately maintain surface drainage variations and patterns reflective of the natural stream geomorphological conditions across the country.

24 CFR 203.51 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-04-01

... DEVELOPMENT MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES SINGLE... conditional commitment or master conditional commitment issued on or after September 24, 1990; or (2) In accordance with the Direct Endorsement program, if the underwriter of the mortgagee signs the appraisal...

24 CFR 203.51 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-04-01

... DEVELOPMENT MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES SINGLE... conditional commitment or master conditional commitment issued on or after September 24, 1990; or (2) In accordance with the Direct Endorsement program, if the underwriter of the mortgagee signs the appraisal...

Modeling stochastic noise in gene regulatory systems

PubMed Central

Meister, Arwen; Du, Chao; Li, Ye Henry; Wong, Wing Hung

2014-01-01

The Master equation is considered the gold standard for modeling the stochastic mechanisms of gene regulation in molecular detail, but it is too complex to solve exactly in most cases, so approximation and simulation methods are essential. However, there is still a lack of consensus about the best way to carry these out. To help clarify the situation, we review Master equation models of gene regulation, theoretical approximations based on an expansion method due to N.G. van Kampen and R. Kubo, and simulation algorithms due to D.T. Gillespie and P. Langevin. Expansion of the Master equation shows that for systems with a single stable steady-state, the stochastic model reduces to a deterministic model in a first-order approximation. Additional theory, also due to van Kampen, describes the asymptotic behavior of multistable systems. To support and illustrate the theory and provide further insight into the complex behavior of multistable systems, we perform a detailed simulation study comparing the various approximation and simulation methods applied to synthetic gene regulatory systems with various qualitative characteristics. The simulation studies show that for large stochastic systems with a single steady-state, deterministic models are quite accurate, since the probability distribution of the solution has a single peak tracking the deterministic trajectory whose variance is inversely proportional to the system size. In multistable stochastic systems, large fluctuations can cause individual trajectories to escape from the domain of attraction of one steady-state and be attracted to another, so the system eventually reaches a multimodal probability distribution in which all stable steady-states are represented proportional to their relative stability. However, since the escape time scales exponentially with system size, this process can take a very long time in large systems. PMID:25632368

Molecular electronics with single molecules in solid-state devices.

PubMed

Moth-Poulsen, Kasper; Bjørnholm, Thomas

2009-09-01

The ultimate aim of molecular electronics is to understand and master single-molecule devices. Based on the latest results on electron transport in single molecules in solid-state devices, we focus here on new insights into the influence of metal electrodes on the energy spectrum of the molecule, and on how the electron transport properties of the molecule depend on the strength of the electronic coupling between it and the electrodes. A variety of phenomena are observed depending on whether this coupling is weak, intermediate or strong.

Finding a Child Care Solution for the Single Parent during Mobilization.

DTIC Science & Technology

1987-04-01

Major Taylor is currently a student at the Air Command and Staff College. Major Taylor has masters degrees in business management and international...center family day care centers are especially applicable to the needs of the PRO" single parent during mobility. Recommendations of the study are to...recommended to implement family day care as soon as possible. 20. DISTRISUTION/AVAILASILITY OF AB3STRACT 21 ABSTRACT SECURITY CLASSIFICATION

Subsurface to substrate: dual-scale micro/nanofluidic networks for investigating transport anomalies in tight porous media.

PubMed

Kelly, Shaina A; Torres-Verdín, Carlos; Balhoff, Matthew T

2016-08-07

Micro/nanofluidic experiments in synthetic representations of tight porous media, often referred to as "reservoir-on-a-chip" devices, are an emerging approach to researching anomalous fluid transport trends in energy-bearing and fluid-sequestering geologic porous media. We detail, for the first time, the construction of dual-scale micro/nanofluidic devices that are relatively large-scale, two-dimensional network representations of granular and fractured nanoporous media. The fabrication scheme used in the development of the networks on quartz substrates (master patterns) is facile and replicable: transmission electron microscopy (TEM) grids with lacey carbon support film were used as shadow masks in thermal evaporation/deposition and reactive ion etch (RIE) was used for hardmask pattern transfer. The reported nanoscale network geometries are heterogeneous and composed of hydraulically resistive paths (throats) meeting at junctures (pores) to mimic the low topological connectivity of nanoporous sedimentary rocks such as shale. The geometry also includes homogenous microscale grid patterns that border the nanoscale networks and represent microfracture pathways. Master patterns were successfully replicated with a sequence of polydimethylsiloxane (PDMS) and Norland Optical Adhesive (NOA) 63 polymers. The functionality of the fabricated quartz and polymer nanofluidic devices was validated with aqueous imbibition experiments and differential interference contrast microscopy. These dual-scale fluidic devices are promising predictive tools for hypothesis testing and calibration against bulk fluid measurements in tight geologic, biologic, and synthetic porous material of similar dual-scale pore structure. Applications to shale/mudrock transport studies in particular are focused on herein.

X-ray/VUV transmission gratings for astrophysical and laboratory applications

NASA Technical Reports Server (NTRS)

Schattenburg, M. L.; Anderson, E. H.; Smith, Henry I.

1990-01-01

This paper describes the techniques used to fabricate deep-submicron-period transmission gratings for astrophysical and laboratory applications, with special attention given to the major steps involved in the transmission grating fabrication. These include the holographic lithography procedure used to pattern the master transmission grating, the fabrication of X-ray mask, the X-ray lithography step used to transfer the X-ray mask pattern into a substrate, and the electroplating of the substrate to form the final grating pattern. The various ways in which transmission gratings can be used in X-ray and VUV spectroscopy are discussed together with some examples of experiments reported in the literature.

Laser Embossing of Micro-and Submicrometer Surface Structures in Copper

NASA Astrophysics Data System (ADS)

Ehrhardt, Martin; Lorenz, Pierre; Frost, Frank; Zimmer, Klaus

Micro- and submicrometer structures have been transferred from nickel foils into solid copper surfaces by laser microembossing. The developed arrangement for laser microembossing allows a large-area replication using multi- pulse laser scanning scheme, guaranties a low contamination of the embossed surface and enables the utilization of thick workpieces. In the micrometer range the replicated patterns feature a high accuracy regarding the shape. A significant difference between the master and the replication pattern could be observed for the laser embossing of submicrometer patterns. In conclusion, the results show that the proposed laser embossing process is a promising method with a number of applications in microengineering.

Children's Identification of Questions from Rising Terminal Pitch

ERIC Educational Resources Information Center

Saindon, Mathieu R.; Trehub, Sandra E.; Schellenberg, E. Glenn; van Lieshout, Pascal

2016-01-01

Young children are slow to master conventional intonation patterns in their "yes/no" questions, which may stem from imperfect understanding of the links between terminal pitch contours and pragmatic intentions. In Experiment 1, five to ten-year-old children and adults were required to judge utterances as questions or statements on the…

Alternative Outlining Techniques for ESL Composition.

ERIC Educational Resources Information Center

Hubbard, Philip

Two methods of outlining are suggested for college-level students of English as a second language (ESL) who need the tools to master rhetorical patterns of academic written English that may be very different from those in their native languages. The two outlining techniques separate the four logically distinct tasks in the process of outlining:…

Race, Memory, and Master Narratives: A Critical Essay on U.S. Curriculum History

ERIC Educational Resources Information Center

Brown, Anthony L.; Au, Wayne

2014-01-01

The field of curriculum studies has a history of looking at its own past, summarizing and synthesizing the trends and patterns across its foundations. Whether through synoptic texts, historical analyses, or edited collections, the field's foundational retrospection typically traces a lineage of curriculum studies that runs through various…

Formalization and Analysis of Reasoning by Assumption

ERIC Educational Resources Information Center

Bosse, Tibor; Jonker, Catholijn M.; Treur, Jan

2006-01-01

This article introduces a novel approach for the analysis of the dynamics of reasoning processes and explores its applicability for the reasoning pattern called reasoning by assumption. More specifically, for a case study in the domain of a Master Mind game, it is shown how empirical human reasoning traces can be formalized and automatically…

Patterns, Drivers and Challenges Pertaining to Postgraduate Taught Study: An International Comparative Analysis

ERIC Educational Resources Information Center

Morgan, Michelle

2014-01-01

The global growth in postgraduate (PG) study since the mid-1990s has been attributed to the expansion in Masters by Coursework participation (Bekhradnia, B. (2005). Postgraduate education in the UK: Trends and challenges higher education policy institute. Paper presented at a conference "The future of postgraduate education supporting the…

Error Patterns in Portuguese Students' Addition and Subtraction Calculation Tasks: Implications for Teaching

ERIC Educational Resources Information Center

Watson, Silvana Maria R.; Lopes, João; Oliveira, Célia; Judge, Sharon

2018-01-01

Purpose: The purpose of this descriptive study is to investigate why some elementary children have difficulties mastering addition and subtraction calculation tasks. Design/methodology/approach: The researchers have examined error types in addition and subtraction calculation made by 697 Portuguese students in elementary grades. Each student…

Using core competencies to build an evaluative framework: outcome assessment of the University of Guelph Master of Public Health program

PubMed Central

2014-01-01

Background Master of Public Health programs have been developed across Canada in response to the need for graduate-level trained professionals to work in the public health sector. The University of Guelph recently conducted a five-year outcome assessment using the Core Competencies for Public Health in Canada as an evaluative framework to determine whether graduates are receiving adequate training, and identify areas for improvement. Methods A curriculum map of core courses and an online survey of University of Guelph Master of Public Health graduates comprised the outcome assessment. The curriculum map was constructed by evaluating course outlines, assignments, and content to determine the extent to which the Core Competencies were covered in each course. Quantitative survey results were characterized using descriptive statistics. Qualitative survey results were analyzed to identify common themes and patterns in open-ended responses. Results The University of Guelph Master of Public Health program provided a positive learning environment in which graduates gained proficiency across the Core Competencies through core and elective courses, meaningful practicums, and competent faculty. Practice-based learning environments, particularly in collaboration with public health organizations, were deemed to be beneficial to students’ learning experiences. Conclusions The Core Competencies and graduate surveys can be used to conduct a meaningful and informative outcome assessment. We encourage other Master of Public Health programs to conduct their own outcome assessments using a similar framework, and disseminate these results in order to identify best practices and strengthen the Canadian graduate public health education system. PMID:25078124

When is four far more than three? Children's generalization of newly acquired number words.

PubMed

Huang, Yi Ting; Spelke, Elizabeth; Snedeker, Jesse

2010-04-01

What is the relationship between children's first number words and number concepts? We used training tasks to explore children's interpretation of number words as they acquired the words' meanings. Children who had mastered the meanings of only the first two or three number words were systematically provided with varied input on the next word-to-quantity mapping, and their extension of the newly trained word was assessed across a variety of test items. Children who had already mastered number words to three generalized training on four to new objects and nouns, such that their representation of the newly learned number was approximate. In contrast, children who had mastered only one and two learned to apply three reliably within a single count-noun context (e.g., three dogs), but did not generalize training to new objects labeled with different nouns (e.g., three cows). Both findings suggest that children fail to map newly learned words in their counting routine to the fully abstract concepts of natural numbers.

Compact millijoule diode-seeded two-stage fiber master oscillator power amplifier using a multipass and forward pumping scheme.

PubMed

Lai, Po-Yen; Chang, Chun-Lin; Huang, Sheng-Lung; Chen, Shih-Hung

2018-05-01

The multipass scheme for a diode-seeded fiber master oscillator power amplifier with a nanojoule-to-millijoule output energy level at a repetition rate of <100  kHz is numerically analyzed for comparison to an experimental benchmark. For a 6/125 single-mode preamplifier with a small input energy (<1  nJ), there is a significant improvement in the output energy from 0.7% to 80% and 95% of the maximum extractable energy using the double-pass and four-pass schemes, respectively. For a 30/250 large-mode-area power amplifier using the double-pass and forward pumping scheme, the required input energy is decreased from 100 μJ to 18 μJ for millijoule energy extraction with accompanying Stokes waves of less than 10% of the total energy. The system based on the full master oscillator power amplifier configuration with an output energy exceeding millijoule level can be optimally simplified to two stages for commercialization.

Detection of Membrane Puncture with Haptic Feedback using a Tip-Force Sensing Needle.

PubMed

Elayaperumal, Santhi; Bae, Jung Hwa; Daniel, Bruce L; Cutkosky, Mark R

2014-09-01

This paper presents calibration and user test results of a 3-D tip-force sensing needle with haptic feedback. The needle is a modified MRI-compatible biopsy needle with embedded fiber Bragg grating (FBG) sensors for strain detection. After calibration, the needle is interrogated at 2 kHz, and dynamic forces are displayed remotely with a voice coil actuator. The needle is tested in a single-axis master/slave system, with the voice coil haptic display at the master, and the needle at the slave end. Tissue phantoms with embedded membranes were used to determine the ability of the tip-force sensors to provide real-time haptic feedback as compared to external sensors at the needle base during needle insertion via the master/slave system. Subjects were able to determine the position of the embedded membranes with significantly better accuracy using FBG tip feedback than with base feedback using a commercial force/torque sensor (p = 0.045) or with no added haptic feedback (p = 0.0024).

Detection of Membrane Puncture with Haptic Feedback using a Tip-Force Sensing Needle

PubMed Central

Elayaperumal, Santhi; Bae, Jung Hwa; Daniel, Bruce L.; Cutkosky, Mark R.

2015-01-01

This paper presents calibration and user test results of a 3-D tip-force sensing needle with haptic feedback. The needle is a modified MRI-compatible biopsy needle with embedded fiber Bragg grating (FBG) sensors for strain detection. After calibration, the needle is interrogated at 2 kHz, and dynamic forces are displayed remotely with a voice coil actuator. The needle is tested in a single-axis master/slave system, with the voice coil haptic display at the master, and the needle at the slave end. Tissue phantoms with embedded membranes were used to determine the ability of the tip-force sensors to provide real-time haptic feedback as compared to external sensors at the needle base during needle insertion via the master/slave system. Subjects were able to determine the position of the embedded membranes with significantly better accuracy using FBG tip feedback than with base feedback using a commercial force/torque sensor (p = 0.045) or with no added haptic feedback (p = 0.0024). PMID:26509101

Fabrication of raised and inverted SU8 polymer waveguides

NASA Astrophysics Data System (ADS)

Holland, Anthony S.; Mitchell, Arnan; Balkunje, Vishal S.; Austin, Mike W.; Raghunathan, Mukund K.

2005-01-01

Polymer films with high optical transmission have been investigated for making optical devices for several years. SU8 photoresist and optical adhesives have been investigated for use as thin films for optical devices, not what they were originally designed for. Optical adhesives are typically a one component thermoset polymer and are convenient to use for making thin film optical devices such as waveguides. They are prepared in minutes as thin films unlike SU8, which has to be carefully thermally cured over several hours for optimum results. However SU8 can be accurately patterned to form the geometry of structures required for single mode optical waveguides. SU8 in combination with the lower refractive index optical adhesive films such as UV15 from Master Bond are used to form single and multi mode waveguides. SU8 is photopatternable but we have also used dry etching of the SU8 layer or the other polymer layers e.g. UV15 to form the ribs, ridges or trenches required to guide single modes of light. Optical waveguides were also fabricated using only optical adhesives of different refractive indices. The resolution obtainable is poorer than with SU8 and hence multi mode waveguides are obtained. Loss measurements have been obtained for waveguides of different geometries and material combinations. The process for making polymer waveguides is demonstrated for making large multi mode waveguides and microfluidic channels by scaling the process up in size.

Funding of North Carolina Tobacco Control Programs Through the Master Settlement Agreement

PubMed Central

Jones, Alison Snow; Austin, W. David; Beach, Robert H.; Altman, David G.

2007-01-01

Changing political and economic forces in 1 tobacco-dependent state, North Carolina, demonstrate how the interplay between these forces and public health priorities has shaped current allocation of Master Settlement Agreement funds. Allocation patterns demonstrate lawmakers’ changing priorities in response to changes in the economic climate; some of the agreement’s funds targeted to tobacco farmers appear to reflect objectives favored by tobacco manufacturers. Funds earmarked for health have underfunded youth tobacco prevention and tobacco control initiatives, and spending for tobacco farmers in North Carolina has not lived up to the rhetoric that accompanied the original agreement. We discuss the implications of these findings for future partnerships between public health advocates and workers as well as tobacco control strategies. PMID:17138928

Using a micro-molding process to fabricate polymeric wavelength filters

NASA Astrophysics Data System (ADS)

Chuang, Wei-Ching; Lee, An-Chen; Ho, Chi-Ting

2008-08-01

A procedure for fabricating a high aspect ratio periodic structure on a UV polymer at submicron order using holographic interferometry and molding processes is described. First, holographic interferometry using a He-Cd (325 nm) laser was used to create the master of the periodic line structure on an i-line sub-micron positive photoresist film. A 20 nm nickel thin film was then sputtered on the photoresist. The final line pattern on a UV polymer was obtained from casting against the master mold. Finally, a SU8 polymer was spun on the polymer grating to form a planar waveguide or a channel waveguide. The measurement results show that the waveguide length could be reduced for the waveguide having gratings with a high aspect ratio.

Porting Gravitational Wave Signal Extraction to Parallel Virtual Machine (PVM)

NASA Technical Reports Server (NTRS)

Thirumalainambi, Rajkumar; Thompson, David E.; Redmon, Jeffery

2009-01-01

Laser Interferometer Space Antenna (LISA) is a planned NASA-ESA mission to be launched around 2012. The Gravitational Wave detection is fundamentally the determination of frequency, source parameters, and waveform amplitude derived in a specific order from the interferometric time-series of the rotating LISA spacecrafts. The LISA Science Team has developed a Mock LISA Data Challenge intended to promote the testing of complicated nested search algorithms to detect the 100-1 millihertz frequency signals at amplitudes of 10E-21. However, it has become clear that, sequential search of the parameters is very time consuming and ultra-sensitive; hence, a new strategy has been developed. Parallelization of existing sequential search algorithms of Gravitational Wave signal identification consists of decomposing sequential search loops, beginning with outermost loops and working inward. In this process, the main challenge is to detect interdependencies among loops and partitioning the loops so as to preserve concurrency. Existing parallel programs are based upon either shared memory or distributed memory paradigms. In PVM, master and node programs are used to execute parallelization and process spawning. The PVM can handle process management and process addressing schemes using a virtual machine configuration. The task scheduling and the messaging and signaling can be implemented efficiently for the LISA Gravitational Wave search process using a master and 6 nodes. This approach is accomplished using a server that is available at NASA Ames Research Center, and has been dedicated to the LISA Data Challenge Competition. Historically, gravitational wave and source identification parameters have taken around 7 days in this dedicated single thread Linux based server. Using PVM approach, the parameter extraction problem can be reduced to within a day. The low frequency computation and a proxy signal-to-noise ratio are calculated in separate nodes that are controlled by the master using message and vector of data passing. The message passing among nodes follows a pattern of synchronous and asynchronous send-and-receive protocols. The communication model and the message buffers are allocated dynamically to address rapid search of gravitational wave source information in the Mock LISA data sets.

Enriching Addition and Subtraction Fact Mastery through Games

ERIC Educational Resources Information Center

Bay-Williams, Jennifer M.; Kling, Gina

2014-01-01

The learning of "basic facts"--single-digit combinations for addition, subtraction, multiplication, and division--has long been a focus of elementary school mathematics. Many people remember completing endless worksheets, timed tests, and flash card drills as they attempted to "master" their basic facts as children. However,…

Mix Master

ERIC Educational Resources Information Center

Waters, John K.

2008-01-01

Data integration is one of the single most challenging tasks any district can face. Fortunately for school districts throughout the country with data scattered in disparate systems, an open specification known as the Schools Interoperability Framework (SIF) is mitigating that challenge. SIF has emerged as a cornerstone of K-12 data warehousing,…

Historical Temporal Shipping (HITS)

DTIC Science & Technology

1978-06-28

Histogram Cells 45 El Figure 4-3 Projection of Area onto Route Perpendicular 45 Figure 4-4 Single Column Cut of Route Envelope 46ii Figure 4-5 Histogram of...Resources, "Super" Bulk Carriers, and Deepwater Port Development." Naval Postgraduate School . June 1974. 8. Gulland, J.A. "The Fish Resources of the Ocean...sailing reports from the various harbour masters. The completeness of the data thus depends in most cases upon the diligence of a single reporting source

Quantitative assessment of protein activity in orphan tissues and single cells using the metaVIPER algorithm. | Office of Cancer Genomics

Cancer.gov

We and others have shown that transition and maintenance of biological states is controlled by master regulator proteins, which can be inferred by interrogating tissue-specific regulatory models (interactomes) with transcriptional signatures, using the VIPER algorithm. Yet, some tissues may lack molecular profiles necessary for interactome inference (orphan tissues), or, as for single cells isolated from heterogeneous samples, their tissue context may be undetermined.

Mechanical behaviour of pressed and sintered titanium alloys obtained from master alloy addition powders.

PubMed

Bolzoni, L; Esteban, P G; Ruiz-Navas, E M; Gordo, E

2012-11-01

The fabrication of the workhorse Ti-6Al-4V alloy and of the Ti-3Al-2.5V alloy was studied considering the master alloy addition variant of the blending elemental approach conventionally used for titanium powder metallurgy. The powders were characterised by means thermal analysis and X-ray diffraction and shaped by means of uniaxial pressing. The microstructural evolution with the sintering temperature (900-1400 °C) was evaluated by SEM and EDS was used to study the composition. XRD patterns as well as the density by Archimedes method were also obtained. The results indicate that master alloy addition is a suitable way to fabricate well developed titanium alloy but also to produce alloy with the desired composition, not available commercially. Density of 4.3 g/cm³ can be obtained where a temperature higher than 1200 °C is needed for the complete diffusion of the alloying elements. Flexural properties comparable to those specified for wrought Ti-6Al-4V medical devices are, generally, obtained. Copyright © 2012 Elsevier Ltd. All rights reserved.

An online survey of chiropractors' opinions of continuing education

PubMed Central

Stuber, Kent J; Grod, Jaroslaw P; Smith, Dean L; Powers, Paul

2005-01-01

Background Continuing Education (CE) for chiropractors is mandatory for licensure in most North American jurisdictions. Numerous chiropractic colleges have begun collaborating with universities to offer master's degree programs. Distance education master's degree programs may be desirable to allow full-time practicing doctors to further their post-graduate education. The present survey sought to answer three questions. First, what is the level of satisfaction of chiropractors with their continuing education? Second, what is the level of interest of chiropractors in online master's degree programs? Lastly, what is the response rate of chiropractors to an online survey? Methods An online survey consisting of 22 multiple choice questions was e-mailed to 1000 chiropractors randomly selected from the mailing list of an online chiropractic newsletter. Upon completion of the questionnaire, participants' answers were saved on a secure site. Data analysis included evaluation of the demographic characteristics of the respondents, their opinions of and patterns of taking CE including online education, preferred learning formats, and their interest in proposed online master's degree programs. A survey response rate was determined. Results Nearly 86% of respondents felt their previously completed CE courses were either somewhat or extremely satisfactory. Over ninety percent of respondents who had completed online or distance CE coursesfound them to be somewhat or extremelysatisfactory. Almost half the respondents indicated that they most preferred online distance learning, while 34.08% most preferred face-to-face interaction. Fifty-three percent of respondents indicated an interest in starting a master's degree program; however 70.46% of respondents were interested in an online master's degree program that would offer CE credit. A response rate of 35.8% was obtained. Conclusion Satisfaction among chiropractors with CE programs is high. The notion of completing a part-time online master's degree (or online combined with face-to-face interaction) appears to be popular among respondents, with a M.Sc. in Chiropractic Sciences being the most popular of those mentioned. Online surveys are a viable method of obtaining opinion in a cost and time efficient manner; there are some sources of bias involved in this type of research, and numerous steps need to be taken to obtain a suitable response rate. PMID:16242035

Discriminative and robust zero-watermarking scheme based on completed local binary pattern for authentication and copyright identification of medical images

NASA Astrophysics Data System (ADS)

Liu, Xiyao; Lou, Jieting; Wang, Yifan; Du, Jingyu; Zou, Beiji; Chen, Yan

2018-03-01

Authentication and copyright identification are two critical security issues for medical images. Although zerowatermarking schemes can provide durable, reliable and distortion-free protection for medical images, the existing zerowatermarking schemes for medical images still face two problems. On one hand, they rarely considered the distinguishability for medical images, which is critical because different medical images are sometimes similar to each other. On the other hand, their robustness against geometric attacks, such as cropping, rotation and flipping, is insufficient. In this study, a novel discriminative and robust zero-watermarking (DRZW) is proposed to address these two problems. In DRZW, content-based features of medical images are first extracted based on completed local binary pattern (CLBP) operator to ensure the distinguishability and robustness, especially against geometric attacks. Then, master shares and ownership shares are generated from the content-based features and watermark according to (2,2) visual cryptography. Finally, the ownership shares are stored for authentication and copyright identification. For queried medical images, their content-based features are extracted and master shares are generated. Their watermarks for authentication and copyright identification are recovered by stacking the generated master shares and stored ownership shares. 200 different medical images of 5 types are collected as the testing data and our experimental results demonstrate that DRZW ensures both the accuracy and reliability of authentication and copyright identification. When fixing the false positive rate to 1.00%, the average value of false negative rates by using DRZW is only 1.75% under 20 common attacks with different parameters.

A status report of a FASTBUS at KEK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arai, Y.; Endo, I.; Inoue

1983-02-01

Some FASTBUS modules have been produced and successfully tested at KEK. The test system consisted of a single backplane segment equipped with ancillary logic, two masters driven by the MC68000 microprocessor and two slaves which have several read/write registers. A simple FASTBUS-CAMAC interface is also described.

Discussion Based Fish Bowl Strategy in Learning Psychology

ERIC Educational Resources Information Center

Singaravelu, G.

2007-01-01

The present study investigates the learning problems in psychology at Master of Education(M.Ed.,) in Bharathiar University and finds the effectiveness of Discussion Based Fish Bowl Strategy in learning psychology. Single group Experimental method was adopted for the study. Both qualitative and quantitative approaches were adopted for this study.…

The Research Identity Scale: Psychometric Analyses and Scale Refinement

ERIC Educational Resources Information Center

Jorgensen, Maribeth F.; Schweinle, William E.

2018-01-01

The 68-item Research Identity Scale (RIS) was informed through qualitative exploration of research identity development in master's-level counseling students and practitioners. Classical psychometric analyses revealed the items had strong validity and reliability and a single factor. A one-parameter Rasch analysis and item review was used to…

A quasispecies approach to the evolution of sexual replication in unicellular organisms.

PubMed

Tannenbaum, Emmanuel; Fontanari, José F

2008-03-01

This study develops a simplified model describing the evolutionary dynamics of a population composed of obligate sexually and asexually reproducing, unicellular organisms. The model assumes that the organisms have diploid genomes consisting of two chromosomes, and that the sexual organisms replicate by first dividing into haploid intermediates, which then combine with other haploids, followed by the normal mitotic division of the resulting diploid into two new daughter cells. We assume that the fitness landscape of the diploids is analogous to the single-fitness-peak approach often used in single-chromosome studies. That is, we assume a master chromosome that becomes defective with just one point mutation. The diploid fitness then depends on whether the genome has zero, one, or two copies of the master chromosome. We also assume that only pairs of haploids with a master chromosome are capable of combining so as to produce sexual diploid cells, and that this process is described by second-order kinetics. We find that, in a range of intermediate values of the replication fidelity, sexually reproducing cells can outcompete asexual ones, provided the initial abundance of sexual cells is above some threshold value. The range of values where sexual reproduction outcompetes asexual reproduction increases with decreasing replication rate and increasing population density. We critically evaluate a common approach, based on a group selection perspective, used to study the competition between populations and show its flaws in addressing the evolution of sex problem.

Design architecture for multi-zone HVAC control systems from existing single-zone systems using wireless sensor networks

NASA Astrophysics Data System (ADS)

Redfern, Andrew; Koplow, Michael; Wright, Paul

2007-01-01

Most residential heating, ventilating, and air-conditioning (HVAC) systems utilize a single zone for conditioning air throughout the entire house. While inexpensive, these systems lead to wide temperature distributions and inefficient cooling due to the difference in thermal loads in different rooms. The end result is additional cost to the end user because the house is over conditioned. To reduce the total amount of energy used in a home and to increase occupant comfort there is a need for a better control system using multiple temperature zones. Typical multi-zone systems are costly and require extensive infrastructure to function. Recent advances in wireless sensor networks (WSNs) have enabled a low cost drop-in wireless vent register control system. The register control system is controlled by a master controller unit, which collects sensor data from a distributed wireless sensor network. Each sensor node samples local settings (occupancy, light, humidity and temperature) and reports the data back to the master control unit. The master control unit compiles the incoming data and then actuates the vent resisters to control the airflow throughout the house. The control system also utilizes a smart thermostat with a movable set point to enable the user to define their given comfort levels. The new system can reduce the run time of the HVAC system and thus decreasing the amount of energy used and increasing the comfort of the home occupations.

A tale of two mechanisms. Strain-softening versus strain-hardening in single crystals under small stressed volumes

DOE PAGES

Bei, Hongbin; Xia, Yuzhi; Barabash, Rozaliya; ...

2015-08-10

Pre-straining defect-free single crystals will introduce heterogeneous dislocation nucleation sources that reduce the measured strength from the theoretical value, while pre-straining bulk samples will lead to strain hardening. Their competition is investigated by nanoindentation pop-in tests on variously pre-strained Mo single crystals with several indenter radii (~micrometer). Pre-straining primarily shifts deformation mechanism from homogeneous dislocation nucleation to a stochastic behavior, while strain hardening plays a secondary role, as summarized in a master plot of pop-in strength versus normalized indenter radius.

Mastering Social and Organization Goals: Strategy Use by Two Children with Asperger Syndrome during Cognitive Orientation to Daily Occupational Performance

ERIC Educational Resources Information Center

Rodger, Sylvia; Vishram, Alysha

2010-01-01

Preliminary data supports the effectiveness of Cognitive Orientation to (daily) Occupational Performance (CO-OP) for children with Asperger syndrome (AS). Children with AS often experience social and organizational difficulties spanning daily occupations. This case study explored the pattern of Global Strategies and Domain-Specific Strategies…

Wither the MLS?

ERIC Educational Resources Information Center

Lonergan, David

2010-01-01

Over the past few years a troubling pattern has emerged, one that might be termed the trivialization of the Master of Library Science (MLS). As a result of several factors, not least the closing of library schools, low rates of pay for librarians, and high costs of living in many parts of the country, some college libraries have found it difficult…

Wains: a pattern-seeking artificial life species.

PubMed

de Buitléir, Amy; Russell, Michael; Daly, Mark

2012-01-01

We describe the initial phase of a research project to develop an artificial life framework designed to extract knowledge from large data sets with minimal preparation or ramp-up time. In this phase, we evolved an artificial life population with a new brain architecture. The agents have sufficient intelligence to discover patterns in data and to make survival decisions based on those patterns. The species uses diploid reproduction, Hebbian learning, and Kohonen self-organizing maps, in combination with novel techniques such as using pattern-rich data as the environment and framing the data analysis as a survival problem for artificial life. The first generation of agents mastered the pattern discovery task well enough to thrive. Evolution further adapted the agents to their environment by making them a little more pessimistic, and also by making their brains more efficient.

Learning to play the violin: motor control by freezing, not freeing degrees of freedom.

PubMed

Konczak, Jürgen; Vander Velden, Heidi; Jaeger, Lukas

2009-05-01

Playing a violin requires precise patterns of limb coordination that are acquired over years of practice. In the present study, the authors investigated how motion at proximal arm joints influenced the precision of bow movements in novice learners and experts. The authors evaluated the performances of 11 children (4-12 years old), 3 beginning-to-advanced level adult players, and 2 adult concert violinists, using a musical work that all had mastered as their first violin piece. The authors found that learning to play the violin was not associated with a release or freeing of joint degrees of freedom. Instead, learning was characterized by an experience-dependent suppression of sagittal shoulder motion, as documented by an observed reduction in joint angular amplitude. This reduction in the amplitude of shoulder flexion-extension correlated highly with a decrease of bow-movement variability. The remaining mechanical degrees of freedom at the elbow and shoulder showed patterns of neither suppression nor freeing. Only violinists with more than 700 practice hr achieved sagittal shoulder range of motion comparable to experts. The findings imply that restricting joint amplitude at selected joint degrees of freedom, while leaving other degrees of freedom unconstrained, constitutes an appropriate strategy for learning complex, high-precision motor patterns in children and adults. The findings also highlight that mastering even seemingly simple bowing movements constitutes a prolonged learning process.

Structural phase study in un-patterned and patterned PVDF semi-crystalline films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pramod, K., E-mail: rameshg.phy@pondiuni.edu.in; Gangineni, Ramesh Babu, E-mail: rameshg.phy@pondiuni.edu.in

2014-04-24

This work explores the structural phase studies of organic polymer- polyvinylidene fluoride (PVDF) thin films in semi-crystallized phase and nano-patterned PVDF thin films. The nanopatterns are transferred with the CD layer as a master using soft lithography technique. The semi-crystalline PVDF films were prepared by a still and hot (SH) method, using a homemade spin coater that has the proficiency of substrate heating by a halogen lamp. Using this set up, smooth PVDF thin films in semi-crystalline α-phase were prepared using 2-Butanone as solvent. XRD, AFM and confocal Raman microscope have been utilized to study the structural phase, crystallinity andmore » quality of the films.« less

Watt-level single-frequency tunable neodymium MOPA fiber laser operating at 915-937 nm

NASA Astrophysics Data System (ADS)

Rota-Rodrigo, S.; Gouhier, B.; Laroche, M.; Zhao, J.; Canuel, B.; Bertoldi, A.; Bouyer, P.; Traynor, N.; Cadier, B.; Robin, T.; Santarelli, G.

2018-02-01

We have developed a Watt-level single-frequency tunable fiber laser in the 915-937 nm spectral window. The laser is based on a neodymium-doped fiber master oscillator power amplifier architecture, with two amplification stages using a 20 mW extended cavity diode laser as seed. The system output power is higher than 2 W from 921 to 933 nm, with a stability better than 1.4% and a low relative intensity noise.

Accuracy of a reformulated fast-set vinyl polysiloxane impression material using dual-arch trays.

PubMed

Kang, Alex H; Johnson, Glen H; Lepe, Xavier; Wataha, John C

2009-05-01

A common technique used for making crown impressions involves use of a vinyl polysiloxane impression material in combination with a dual-arch tray. A leading dental manufacturer has reformulated its vinyl polysiloxane (VPS) impression line, but the accuracy of the new material has not been verified. The purpose of this study was to assess the accuracy of reformulated VPS impression materials using the single-step dual-arch impression technique. Dual-arch impressions were made on a typodont containing a master stainless steel standard crown preparation die, from which gypsum working dies were formed, recovered, and measured. The impression materials evaluated were Imprint 3 Penta Putty with Quick Step Regular Body (IP-0); Imprint 3 Penta Quick Step Heavy Body with Quick Step Light Body (IP-1); Aquasil Ultra Rigid Fast Set with LV Fast Set (AQ-1); and Aquasil Ultra Heavy Fast Set with XLV Fast Set (AQ-2) (n=10). All impressions were disinfected with CaviCide spray for 10 minutes prior to pouring with type IV gypsum. Buccolingual (BL), mesiodistal (MD), and occlusogingival (OG) dimensions were measured and compared to the master die using an optical measuring microscope. Linear dimensional change was also assessed for IP-0 and AQ-1 at 1 and 24 hours based on ANSI/ADA Specification No. 19. Single-factor ANOVA with Dunnett's T3 multiple comparisons was used to compare BL, MD, and OG changes, with hypothesis testing at alpha=.05. A repeated-measures ANOVA was used to compare linear dimensional changes. There were statistical differences among the 4 impression systems for 3 of 4 dimensions of the master die. IP-0 working dies were significantly larger in MD and OG-L dimensions but significantly smaller in the BL dimension. IP-1 working dies were significantly smaller in the BL dimension compared to the master die. With the exception of IP-0, differences detected were small and clinically insignificant. No significant differences were observed for linear dimensional change. The single-step dual-arch impression technique produced working dies that were smaller in 3 of the 4 dimensions measured and may require additional die relief to achieve appropriate fit of cast restorations. Overall accuracy was acceptable for all impression groups with the exception of IP-0.

Antenna Controller Replacement Software

NASA Technical Reports Server (NTRS)

Chao, Roger Y.; Morgan, Scott C.; Strain, Martha M.; Rockwell, Stephen T.; Shimizu, Kenneth J.; Tehrani, Barzia J.; Kwok, Jaclyn H.; Tuazon-Wong, Michelle; Valtier, Henry; Nalbandi, Reza;

Anion channels: master switches of stress responses.

PubMed

Roelfsema, M Rob G; Hedrich, Rainer; Geiger, Dietmar

2012-04-01

During stress, plant cells activate anion channels and trigger the release of anions across the plasma membrane. Recently, two new gene families have been identified that encode major groups of anion channels. The SLAC/SLAH channels are characterized by slow voltage-dependent activation (S-type), whereas ALMT genes encode rapid-activating channels (R-type). Both S- and R-type channels are stimulated in guard cells by the stress hormone ABA, which leads to stomatal closure. Besides their role in ABA-dependent stomatal movement, anion channels are also activated by biotic stress factors such as microbe-associated molecular patterns (MAMPs). Given that anion channels occur throughout the plant kingdom, they are likely to serve a general function as master switches of stress responses. Copyright © 2012 Elsevier Ltd. All rights reserved.

Dictionary Indexing of Electron Channeling Patterns.

PubMed

Singh, Saransh; De Graef, Marc

2017-02-01

The dictionary-based approach to the indexing of diffraction patterns is applied to electron channeling patterns (ECPs). The main ingredients of the dictionary method are introduced, including the generalized forward projector (GFP), the relevant detector model, and a scheme to uniformly sample orientation space using the "cubochoric" representation. The GFP is used to compute an ECP "master" pattern. Derivative free optimization algorithms, including the Nelder-Mead simplex and the bound optimization by quadratic approximation are used to determine the correct detector parameters and to refine the orientation obtained from the dictionary approach. The indexing method is applied to poly-silicon and shows excellent agreement with the calibrated values. Finally, it is shown that the method results in a mean disorientation error of 1.0° with 0.5° SD for a range of detector parameters.

Geophysical survey of the Eggvin Bank and Logi Ridge - Greenland Sea

NASA Astrophysics Data System (ADS)

Breivik, A. J.; Mjelde, R.; Rai, A. K.; Frassetto, A.

2012-12-01

The northern Greenland Sea has a number of features associated with excess volcanism. These include the Jan Mayen island, the Jan Mayen Plateau north of, and the Eggvin Bank west of Jan Mayen, and the Vesteris Seamount far to the north. In the summer of 2011, we colleced an Ocean Bottom Seismometer (OBS) profile across the Eggvin Bank, returning four good data sets. We also collected single-channel reflection seismic (SCS) data along the OBS line. The profile crosses the transform part of the West Jan Mayen Fracture Zone (WJMFZ), which connects seafloor spreading between the Kolbeinsey and Mohn ridges. Between the WJMFZ and the Vesteris Seamount there is a narrow ridge 170-180 km long, ending in a few seamounts in the east. It disturbs the magnetic seafloor anomalies, and has no conjugate on the Norwegian margin. It thus appears to be younger than the Eocene seafloor it lies on. Trend and position points to Traill Ø in East Greenland, which had magmatism at ~36 Ma. We name it the Logi Ridge after Norse mythology, where Logi is the master of fire, brother of Aegir, master of the sea. We have collected five SCS profiles across this ridge in order to study the surrounding sedimentation pattern. We also collected gravity and magnetic data along all profiles. Initial results show two flat-topped seamounts on the Eggvin Bank, and a flat-topped Logi Ridge, indicating that these have been at sealevel. The sedimentary strata show recent vertical movement north of the WJMFZ near the Jan Mayen Plateau, and compression around the Logi Ridge. Sailing line of R/V Håkon Mosby of Bergen. Survey lines are in bold, and OBS positions are marked by circles.

Hematopoietic transcriptional mechanisms: from locus-specific to genome-wide vantage points.

PubMed

DeVilbiss, Andrew W; Sanalkumar, Rajendran; Johnson, Kirby D; Keles, Sunduz; Bresnick, Emery H

2014-08-01

Hematopoiesis is an exquisitely regulated process in which stem cells in the developing embryo and the adult generate progenitor cells that give rise to all blood lineages. Master regulatory transcription factors control hematopoiesis by integrating signals from the microenvironment and dynamically establishing and maintaining genetic networks. One of the most rudimentary aspects of cell type-specific transcription factor function, how they occupy a highly restricted cohort of cis-elements in chromatin, remains poorly understood. Transformative technologic advances involving the coupling of next-generation DNA sequencing technology with the chromatin immunoprecipitation assay (ChIP-seq) have enabled genome-wide mapping of factor occupancy patterns. However, formidable problems remain; notably, ChIP-seq analysis yields hundreds to thousands of chromatin sites occupied by a given transcription factor, and only a fraction of the sites appear to be endowed with critical, non-redundant function. It has become en vogue to map transcription factor occupancy patterns genome-wide, while using powerful statistical tools to establish correlations to inform biology and mechanisms. With the advent of revolutionary genome editing technologies, one can now reach beyond correlations to conduct definitive hypothesis testing. This review focuses on key discoveries that have emerged during the path from single loci to genome-wide analyses, specifically in the context of hematopoietic transcriptional mechanisms. Copyright © 2014 ISEH - International Society for Experimental Hematology. Published by Elsevier Inc. All rights reserved.

Telemanipulation of cooperative robots: a case of study

NASA Astrophysics Data System (ADS)

Pliego-Jiménez, Javier; Arteaga-Pérez, Marco

2018-06-01

This article addresses the problem of dexterous robotic grasping by means of a telemanipulation system composed of a single master and two slave robot manipulators. The slave robots are analysed as a cooperative system where it is assumed that the robots can push but not pull the object. In order to achieve a stable rigid grasp, a centralised adaptive position-force control algorithm for the slave robots is proposed. On the other hand, a linear velocity observer for the master robot is developed to avoid numerical differentiation. A set of experiments with different human operators were carried out to show the good performance and capabilities of the proposed control-observer algorithm. In addition, the dynamic model and closed-loop dynamics of the telemanipulation is presented.

Evaluating a Pre-Session Homework Exercise in a Standalone Information Literacy Class

ERIC Educational Resources Information Center

Goetz, Joseph E.; Barber, Catherine R.

2015-01-01

In this study, researchers evaluate a homework exercise assigned before a standalone information literacy session. Students in a Master of Education program completed a worksheet using the ERIC database thesaurus. The researchers conducted pre- and posttests within a single library session to assess student learning, using a control group for…

Embedding Individualized Social Goals into Routine Activities in Inclusive Early Childhood Classrooms

ERIC Educational Resources Information Center

Macy, Marisa G.; Bricker, Diane D.

2007-01-01

This study examined the effectiveness of embedding children's social goals into routine activities within inclusive preschool classroom settings. An AB (i.e. baseline and intervention) single-subject design was used across three male participants with identified disabilities. Three student-teachers, enrolled in a master's program at a university,…

GASOLINE-CONTAMINATED GROUND WATER AS A SOURCE OF RESIDENTIAL BENZENE EXPOSURE: A CASE STUDY

EPA Science Inventory

In a private residence using gasoline-contaminated water (approximately 300 ug/l benzene), a series of experiments were performed to assess the potential benzene exposures that may occur in the shower stall, bathroom, master bedroom, and living room as a result of a single 20-min...

Development of a 100-W, single-frequency Nd:YAG laser for large-scale cryogenic gravitational wave telescope

NASA Astrophysics Data System (ADS)

Takeno, K.; Ozeki, T.; Moriwaki, S.; Mio, N.

2006-03-01

We have built a 100-W injection-locked Nd:YAG laser for a Japanese next generation gravitational wave detector. A 2-W master laser was directly injected to a high-power slave laser, which led to coherent radiation of 100 W at 1064 nm.

The Bologna Process and the European Gain: Africa's Development Demise?

ERIC Educational Resources Information Center

Shawa, Lester Brian

2008-01-01

The Bologna process is a fundamental restructuring of higher education in Europe, of which the introduction of three cycles: bachelor's, master's and doctorate, in lieu of the traditional long program is the single most important feature. Its objectives are to increase the employability of European citizens and the competitiveness and…

Discovery and progress of direct cardiac reprogramming.

PubMed

Kojima, Hidenori; Ieda, Masaki

2017-06-01

Cardiac disease remains a major cause of death worldwide. Direct cardiac reprogramming has emerged as a promising approach for cardiac regenerative therapy. After the discovery of MyoD, a master regulator for skeletal muscle, other single cardiac reprogramming factors (master regulators) have been sought. Discovery of cardiac reprogramming factors was inspired by the finding that multiple, but not single, transcription factors were needed to generate induced pluripotent stem cells (iPSCs) from fibroblasts. We first reported a combination of cardiac-specific transcription factors, Gata4, Mef2c, and Tbx5 (GMT), that could convert mouse fibroblasts into cardiomyocyte-like cells, which were designated as induced cardiomyocyte-like cells (iCMs). Following our first report of cardiac reprogramming, many researchers, including ourselves, demonstrated an improvement in cardiac reprogramming efficiency, in vivo direct cardiac reprogramming for heart regeneration, and cardiac reprogramming in human cells. However, cardiac reprogramming in human cells and adult fibroblasts remains inefficient, and further efforts are needed. We believe that future research elucidating epigenetic barriers and molecular mechanisms of direct cardiac reprogramming will improve the reprogramming efficiency, and that this new technology has great potential for clinical applications.

Dynamics of Li+ ions in Li2O-TeO2-P2O5 glasses

NASA Astrophysics Data System (ADS)

Chatterjee, A.; Ghosh, A.

2018-04-01

In the present work we have studied transport properties of lithium ions in 0.3Li2O-0.7[xTeO2-(1-x)P2O5] glasses, where x=0.5, 0.6, 0.7. We have measured acconductivity for a wide range offrequency and temperature. The real part of the conductivity spectra has been analyzed by the power law in Almond-West formalism. The dc conductivity has been obtained from the complex impedance plots. We have found that dc conductivity increases and activation energy decreases on increase of TeO2 for a particular Li2O content. We have also found that the dc conductivity and crossover frequency obey Arrhenius relation. The time temperature superposition has been verified using the scaling formalism of the conductivity spectra. We have found that the conductivity isotherms scaled to a single master curve with suitable scaling parameters for a particular composition at different temperatures. However the scaling to a single master curve fails for different compositions at a particular temperature.

Cavity-coupled double-quantum dot at finite bias: Analogy with lasers and beyond

NASA Astrophysics Data System (ADS)

Kulkarni, Manas; Cotlet, Ovidiu; Türeci, Hakan E.

2014-09-01

We present a theoretical and experimental study of photonic and electronic transport properties of a voltage biased InAs semiconductor double quantum dot (DQD) that is dipole coupled to a superconducting transmission line resonator. We obtain the master equation for the reduced density matrix of the coupled system of cavity photons and DQD electrons accounting systematically for both the presence of phonons and the effect of leads at finite voltage bias. We subsequently derive analytical expressions for transmission, phase response, photon number, and the nonequilibrium steady-state electron current. We show that the coupled system under finite bias realizes an unconventional version of a single-atom laser and analyze the spectrum and the statistics of the photon flux leaving the cavity. In the transmission mode, the system behaves as a saturable single-atom amplifier for the incoming photon flux. Finally, we show that the back action of the photon emission on the steady-state current can be substantial. Our analytical results are compared to exact master equation results establishing regimes of validity of various analytical models. We compare our findings to available experimental measurements.

Feasibility of e-paper made with cellulose

NASA Astrophysics Data System (ADS)

Yoo, K. H.; Han, K. J.; Chen, Yi; Kang, K. S.; Kim, Jaehwan

2008-03-01

Cellulose is a beneficial material that has low cost, light weight, high compatibility, and biodegradability. Recently electro-active paper (EAPap) composed with cellulose was discovered as a smart material for application to variety industrial fields such as smart wall-paper, actuator, and magic carpet. It also exhibited actuator property through ion migration and piezoelectric effect. Since cellulose acetate (CA) film has optically transparent property, we focused on optical field application, such as electronic paper, prismsheet, and polarized film. Since CA can be easily dissolved in variety of organic solvent, various weight % (from 1 to 25 wt. %) of CA solution in acetone was prepared. Polydimethylsilane (PDMS) master pattern was fabricated on the silicone wafer. CA solution was poured to the master mold and dried using spin-coating or tape casting method. Various shape and height patterns, such as circle, honeycomb, and rectangular patterns were fabricated using 12 wt. % CA solution. The resulting pattern showed uniform size in the large area without defect. These patterns can be utilized as a substrate and cell pattern for the electronic paper. To investigate saponification (SA) effect to convert CA to regenerated cellulose, CA film was immersed into the sodium methoxide solution in methanol for various times. The fabricated CA films were stretched and immersed into the sodium methoxide solution in methanol to desubstitute the acetate group. These regenerated cellulose films have larger mechanical strength than CA films. Although the UV-visible transmittance was decreased as increasing SA time, the transmittance of the further SA process and stretched film backed up near untreated CA film. Although the cross-sectional image of the saponified and unstretched CA film did not have specific directional structure, the cross-sectional FESEM image of the saponified and stretched CA film had one directional fiber structure. The fiber was aligned to the stretched direction. Most of the compositions were one directional ordered nanofibers having diameter of approximately 30nm.

Optical polarimetric observations of GRB prompt emissions by MASTER robots-telescopes net.

NASA Astrophysics Data System (ADS)

Gorbovskoy, Evgeny; Lipunov, Vladimir; Kornilov, Victor; Shatskij, Nikolaj; Kuvshi-Nov, Dmitry; Tyurina, Nataly; Belinski, Alexander; Krylov, Alexander; Balanutsa, Pavel; Chazov, Vadim; Kuznetsov, Artem; Zimnuhov, Dmitry; Balanutsa, Pavel; Kortunov, Petr; Sankovich, Anatoly; Tlatov, An-Drey; Parkhomenko, A.; Krushinsky, Vadim; Zalozhnyh, Ivan; Popov, A.; Kopytova, Taisia; Ivanov, Kirill; Yazev, Sergey; Yurkov, Vladimir

The main goal of the MASTER-Net project is to produce a unique fast sky survey with all sky observed over a single night down to a limiting magnitude of 19 -20mag. Such a survey will make it possible to address a number of fundamental problems: search for dark energy via the discovery and photometry of supernovas (including SNIa), search for exoplanets, microlensing effects, discovery of minor bodies in the Solar System and space-junk monitoring. All MASTER telescopes can be guided by alerts, and we plan to observe prompt optical emission from gamma-ray bursts synchronously in several filters and in several polarization planes. Observations on telescopes capable to observ polarisation of GRB prompt emission have been begun in the summer of 2009. Since summer of 2009 an observations of several GRB have been made. In particular for GRB0910 and GRB091127 optical polarisation has been measured. So, for GRB091127 which supervision have begun all through 91 sec polarisation at level of several tens percent has been registered. (GCN 10231, GCN 10052, GCN 10203)

Learning To Teach in Multicultural Contexts: Exploring Preservice Teachers' Knowledge Change. Part I: Group Patterns. Part II: Case Studies. Draft.

ERIC Educational Resources Information Center

Artiles, Alfredo J.; And Others

This study examined the impact of multicultural education courses on preservice teachers' pedagogical knowledge and beliefs about culturally diverse learners. Part 1 reports on a study of 20 preservice teachers pursuing a masters degree in elementary education enrolled in a required multicultural education course and were examined for their…

The Reliability of Classification Decisions for the Furtado-Gallagher Computerized Observational Movement Pattern Assessment System--FG-COMPASS

ERIC Educational Resources Information Center

Furtado, Ovande, Jr.; Gallagher, Jere D.

2012-01-01

Mastery of fundamental movement skills (FMS) is an important factor in preventing weight gain and increasing physical activity. To master FMS, performance evaluation is necessary. In this study, we investigated the reliability of a new observational assessment tool. In Phase I, 110 video clips of children performing five locomotor, and six…

Individual Differences in Late Bilinguals' L2 Phonological Processes: From Acoustic-Phonetic Analysis to Lexical Access

ERIC Educational Resources Information Center

Diaz, Begona; Mitterer, Holger; Broersma, Mirjam; Sebastian-Galles, Nuria

2012-01-01

The extent to which the phonetic system of a second language is mastered varies across individuals. The present study evaluates the pattern of individual differences in late bilinguals across different phonological processes. Fifty-five late Dutch-English bilinguals were tested on their ability to perceive a difficult L2 speech contrast (the…

Teacher Retention and Satisfaction: A Comparison of M.A.T. and B.S./B.A. Graduates in Teacher Education.

ERIC Educational Resources Information Center

Matthes, William A.; Duffy, William E.

1989-01-01

Reports on characteristics, career patterns, and career satisfaction of 269 teacher education graduates, 1966-1976, who completed either a bachelors degree or an M.A. in teaching. Finds that career satisfaction was related to degree program completed (masters vs. bachelors) and to school locale (rural vs. suburban). Contains 19 references. (SV)

The Emerging Engineering Scholar: A Citation Analysis of Theses and Dissertations at Western Michigan University

ERIC Educational Resources Information Center

Eckel, Edward J.

2009-01-01

Can one glimpse the development of emerging scholars in the work of engineering graduate students? To answer this question, the author studied the citation patterns in 96 Master's theses and 24 Ph.D. dissertations completed at Western Michigan University's College of Engineering and Applied Sciences between 2002 and 2006. The hypothesis of this…

A Worldwide Survey of MATESOL Programs in 2014: Patterns and Perspectives

ERIC Educational Resources Information Center

Stapleton, Paul; Shao, Qing

2018-01-01

This article reports on a survey of 241 Master of Arts programs in TESOL (MATESOL) in 16 countries serving as a snapshot of second language teacher education in 2014. After an initial screening by a set of criteria, these programs were first identified, and their course offerings, among other criteria, such as entrance and capstone requirements,…

A mobile mapping system for spatial information based on DGPS/EGIS

NASA Astrophysics Data System (ADS)

Pei, Ling; Wang, Qing; Gu, Juan

2007-11-01

With the rapid developments of mobile device and wireless communication, it brings a new challenge for acquiring the spatial information. A mobile mapping system based on differential global position system (DGPS) integrated with embedded geographic information system (EGIS) is designed. A mobile terminal adapts to various GPS differential environments such as single base mode and network GPS mode like Virtual Reference Station (VRS) and Master- Auxiliary Concept (MAC) by the mobile communication technology. The spatial information collected through DGPS is organized in an EGIS running in the embedded device. A set of mobile terminal in real-time DGPS based on GPRS adopting multithreading technique of serial port in manner of simulating overlapped I/O operating is developed, further more, the GPS message analysis and checkout based on Strategy Pattern for various receivers are included in the process of development. A mobile terminal accesses to the GPS network successfully by NTRIP (Networked Transport of RTCM via Internet Protocol) compliance. Finally, the accuracy and reliability of the mobile mapping system are proved by a lot of testing in 9 provinces all over the country.

Evolutionary Co-Option of Floral Meristem Identity Genes for Patterning of the Flower-Like Asteraceae Inflorescence1

PubMed Central

Broholm, Suvi K.; Tähtiharju, Sari

2016-01-01

The evolutionary success of Asteraceae, the largest family of flowering plants, has been attributed to the unique inflorescence architecture of the family, which superficially resembles an individual flower. Here, we show that Asteraceae inflorescences (flower heads, or capitula) resemble solitary flowers not only morphologically but also at the molecular level. By conducting functional analyses for orthologs of the flower meristem identity genes LEAFY (LFY) and UNUSUAL FLORAL ORGANS (UFO) in Gerbera hybrida, we show that GhUFO is the master regulator of flower meristem identity, while GhLFY has evolved a novel, homeotic function during the evolution of head-like inflorescences. Resembling LFY expression in a single flower meristem, uniform expression of GhLFY in the inflorescence meristem defines the capitulum as a determinate structure that can assume floral fate upon ectopic GhUFO expression. We also show that GhLFY uniquely regulates the ontogeny of outer, expanded ray flowers but not inner, compact disc flowers, indicating that the distinction of different flower types in Asteraceae is connected with their independent evolutionary origins from separate branching systems. PMID:27382139

Interaction of aldolase with actin-containing filaments. Structural studies.

PubMed Central

Stewart, M; Morton, D J; Clarke, F M

1980-01-01

Electron micrographs of the paracrystals formed when fructose bisphosphate aldolase (EC 4.1.2.13) is added to actin-containing filaments were analysed by computer methods so that ultrastructural changes could be correlated with the various stoicheiometries of binding determined in the preceding paper [Walsh, Winzor, Clarke, Masters & Morton (1980) Biochem. J. 186, 89-98]. Paracrystals formed with aldolase and either F-actin or F-actin-tropomyosin have a single light transverse band every 38 nm, which is due to aldolase molecules cross-linking the filaments. In contrast, the paracrystals formed between aldolase and F-actin-tropomyosin-troponin filaments show two transverse bands every 38 nm: a major band, interpreted as aldolase binding to troponin, and a minor band, interpreted as aldolase cross-linking the filaments. The intensity of the minor band varies with Ca2+ concentration, being greatest when the Ca2+ concentration is low. A model for the different paracrystal structures which relates the various patterns and binding stoicheiometries to structural changes in the actin-containing filaments is proposed. Images PLATE 1 PMID:6892771

Integrated modeling analysis of a novel hexapod and its application in active surface

NASA Astrophysics Data System (ADS)

Yang, Dehua; Zago, Lorenzo; Li, Hui; Lambert, Gregory; Zhou, Guohua; Li, Guoping

2011-09-01

This paper presents the concept and integrated modeling analysis of a novel mechanism, a 3-CPS/RPPS hexapod, for supporting segmented reflectors for radio telescopes and eventually segmented mirrors of optical telescopes. The concept comprises a novel type of hexapod with an original organization of actuators hence degrees of freedom, based on a swaying arm based design concept. Afterwards, with specially designed connecting joints between panels/segments, an iso-static master-slave active surface concept can be achieved for any triangular and/or hexagonal panel/segment pattern. The integrated modeling comprises all the multifold sizing and performance aspects which must be evaluated concurrently in order to optimize and validate the design and the configuration. In particular, comprehensive investigation of kinematic behavior, dynamic analysis, wave-front error and sensitivity analysis are carried out, where, frequently used tools like MATLAB/SimMechanics, CALFEM and ANSYS are used. Especially, we introduce the finite element method as a competent approach for analyses of the multi-degree of freedom mechanism. Some experimental verifications already performed validating single aspects of the integrated concept are also presented with the results obtained.

Stress concentration in periodically rough Hertzian contact: Hertz to soft-flat-punch transition

PubMed Central

Raphaël, E.; Léger, L.; Restagno, F.; Poulard, C.

2016-01-01

We report on the elastic contact between a spherical lens and a patterned substrate, composed of a hexagonal lattice of cylindrical pillars. The stress field and the size of the contact area are obtained by means of numerical methods: a superposition method of discrete pressure elements and an iterative bisection-like method. For small indentations, a transition from a Hertzian to a soft-flat-punch behaviour is observed when the surface fraction of the substrate that is covered by the pillars is increased. In particular, we present a master curve defined by two dimensionless parameters, which allows one to predict the stress at the centre of the contact region in terms of the surface fraction occupied by pillars. The transition between the limiting contact regimes, Hertzian and soft-flat-punch, is well described by a rational function. Additionally, a simple model to describe the Boussinesq–Cerruti-like contact between the lens and a single elastic pillar, which takes into account the pillar geometry and the elastic properties of the two bodies, is presented. PMID:27713659

A synchronous serial bus for multidimensional array acoustic logging tool

NASA Astrophysics Data System (ADS)

Men, Baiyong; Ju, Xiaodong; Lu, Junqiang; Qiao, Wenxiao

2016-12-01

In high-temperature and spatial borehole applications, a distributed structure is employed in a multidimensional array acoustic logging tool (MDALT) based on a phased array technique for electronic systems. However, new challenges, such as synchronous multichannel data acquisition, multinode real-time control and bulk data transmission in a limited interval, have emerged. To address these challenges, we developed a synchronous serial bus (SSB) in this study. SSB works in a half-duplex mode via a master-slave architecture. It also consists of a single master, several slaves, a differential clock line and a differential data line. The clock line is simplex, whereas the data line is half-duplex and synchronous to the clock line. A reliable communication between the master and the slaves with real-time adjustment of synchronisation is achieved by rationally designing the frame format and protocol of communication and by introducing a scramble code and a Hamming error-correcting code. The control logic of the master and the slaves is realized in field programmable gate array (FPGA) or complex programmable logic device (CPLD). The clock speed of SSB is 10 MHz, the effective data rate of the bulk data transmission is over 99%, and the synchronous errors amongst the slaves are less than 10 ns. Room-temperature test, high-temperature test (175 °C) and field test demonstrate that the proposed SSB is qualified for MDALT.

Multi-step Variable Height Photolithography for Valved Multilayer Microfluidic Devices.

PubMed

Brower, Kara; White, Adam K; Fordyce, Polly M

2017-01-27

Microfluidic systems have enabled powerful new approaches to high-throughput biochemical and biological analysis. However, there remains a barrier to entry for non-specialists who would benefit greatly from the ability to develop their own microfluidic devices to address research questions. Particularly lacking has been the open dissemination of protocols related to photolithography, a key step in the development of a replica mold for the manufacture of polydimethylsiloxane (PDMS) devices. While the fabrication of single height silicon masters has been explored extensively in literature, fabrication steps for more complicated photolithography features necessary for many interesting device functionalities (such as feature rounding to make valve structures, multi-height single-mold patterning, or high aspect ratio definition) are often not explicitly outlined. Here, we provide a complete protocol for making multilayer microfluidic devices with valves and complex multi-height geometries, tunable for any application. These fabrication procedures are presented in the context of a microfluidic hydrogel bead synthesizer and demonstrate the production of droplets containing polyethylene glycol (PEG diacrylate) and a photoinitiator that can be polymerized into solid beads. This protocol and accompanying discussion provide a foundation of design principles and fabrication methods that enables development of a wide variety of microfluidic devices. The details included here should allow non-specialists to design and fabricate novel devices, thereby bringing a host of recently developed technologies to their most exciting applications in biological laboratories.

Polymer microfluidic device replacing fluids using only capillary force

NASA Astrophysics Data System (ADS)

Chung, Kwang Hyo; Lee, Dae Sik; Yang, Haesik; Kim, Sung Jin; Pyo, Hyun Bong

2005-02-01

A novel polymer microfluidic device for self-wash using only capillary force is presented. A liquid filled in a reaction chamber is replaced by another liquid with no external actuation. All the fluidic actuations in the device is pre-programmed about time and sequence, and accomplished by capillary force naturally. Careful design is necessary for exact actions. The fluidic conduits were designed by the newly derived theoretical equations about the capillary stop pressure and flow time. Simulations using CFD-ACE+ were conducted to check the validity of theory and the performance of the chip. These analytic results were consistent with experimental ones. The chip was made of polymers for the purpose of single use and low price. It was fabricated by sealing the hot-embossed PMMA substrate with a PET film. For simpler fabrication, the chip was of a single height. The embossing master was produced from a nickel-electroplating on a SU8-patterned Ni-plate followed by CMP. The contact angles of liquids on substrates were manipulated through the mixing of surfactants, and the temporal variations were monitored for a more exact design. The real actuation steps in experiment revealed the stable performance of selfwash, and coincided well with the designed ones. The presented microfluidic method can be applicable to other LOCs of special purposes through simple modification. For example, array or serial types would be possible for multiple selfwashes.

Remote beating of parallel or orthogonally polarized dual-wavelength optical carriers for 5G millimeter-wave radio-over-fiber link.

PubMed

Wang, Huai-Yung; Chi, Yu-Chieh; Lin, Gong-Ru

2016-08-08

A novel millimeter-wave radio over fiber (MMW-RoF) link at carrier frequency of 35-GHz is proposed with the use of remotely beating MMW generation from reference master and injected slave colorless laser diode (LD) carriers at orthogonally polarized dual-wavelength injection-locking. The slave colorless LD supports lasing one of the dual-wavelength master modes with orthogonal polarizations, which facilitates the single-mode direct modulation of the quadrature amplitude modulation (QAM) orthogonal frequency division multiplexing (OFDM) data. Such an injected single-carrier encoding and coupled dual-carrier transmission with orthogonal polarization effectively suppresses the cross-heterodyne mode-beating intensity noise, the nonlinear modulation (NLM) and four-wave mixing (FWM) sidemodes during injection locking and fiber transmission. In 25-km single-mode fiber (SMF) based wireline system, the dual-carrier under single-mode encoding provides baseband 24-Gbit/s 64-QAM OFDM transmission with an error vector magnitude (EVM) of 8.8%, a bit error rate (BER) of 3.7 × 10^-3, a power penalty of <1.5 dB. After remotely self-beating for wireless transmission, the beat MMW carrier at 35 GHz can deliver the passband 16-QAM OFDM at 4 Gbit/s to show corresponding EVM and BER of 15.5% and 1.4 × 10^-3, respectively, after 25-km SMF and 1.6-m free-space transmission.

A polar-region-adaptable systematic bias collaborative measurement method for shipboard redundant rotational inertial navigation systems

NASA Astrophysics Data System (ADS)

Wang, Lin; Wu, Wenqi; Wei, Guo; Lian, Junxiang; Yu, Ruihang

2018-05-01

The shipboard redundant rotational inertial navigation system (RINS) configuration, including a dual-axis RINS and a single-axis RINS, can satisfy the demand of marine INSs of especially high reliability as well as achieving trade-off between position accuracy and cost. Generally, the dual-axis RINS is the master INS, and the single-axis RINS is the hot backup INS for high reliability purposes. An integrity monitoring system performs a fault detection function to ensure sailing safety. However, improving the accuracy of the backup INS in case of master INS failure has not been given enough attention. Without the aid of any external information, a systematic bias collaborative measurement method based on an augmented Kalman filter is proposed for the redundant RINSs. Estimates of inertial sensor biases can be used by the built-in integrity monitoring system to monitor the RINS running condition. On the other hand, a position error prediction model is designed for the single-axis RINS to estimate the systematic error caused by its azimuth gyro bias. After position error compensation, the position information provided by the single-axis RINS still remains highly accurate, even if the integrity monitoring system detects a dual-axis RINS fault. Moreover, use of a grid frame as a navigation frame makes the proposed method applicable in any area, including the polar regions. Semi-physical simulation and experiments including sea trials verify the validity of the method.

A Computer-Controlled Laser Bore Scanner

NASA Astrophysics Data System (ADS)

Cheng, Charles C.

1980-08-01

This paper describes the design and engineering of a laser scanning system for production applications. The laser scanning techniques, the timing control, the logic design of the pattern recognition subsystem, the digital computer servo control for the loading and un-loading of parts, and the laser probe rotation and its synchronization will be discussed. The laser inspection machine is designed to automatically inspect the surface of precision-bored holes, such as those in automobile master cylinders, without contacting the machined surface. Although the controls are relatively sophisticated, operation of the laser inspection machine is simple. A laser light beam from a commercially available gas laser, directed through a probe, scans the entire surface of the bore. Reflected light, picked up through optics by photoelectric sensors, generates signals that are fed to a mini-computer for processing. A pattern recognition techniques program in the computer determines acceptance or rejection of the part being inspected. The system's acceptance specifications are adjustable and are set to the user's established tolerances. However, the computer-controlled laser system is capable of defining from 10 to 75 rms surface finish, and voids or flaws from 0.0005 to 0.020 inch. Following the successful demonstration with an engineering prototype, the described laser machine has proved its capability to consistently ensure high-quality master brake cylinders. It thus provides a safety improvement for the automotive braking system. Flawless, smooth cylinder bores eliminate premature wearing of the rubber seals, resulting in a longer-lasting master brake cylinder and a safer and more reliable automobile. The results obtained from use of this system, which has been in operation about a year for replacement of a tedious, manual operation on one of the high-volume lines at the Bendix Hydraulics Division, have been very satisfactory.

Teaching foundational perspective-taking skills to children with autism using the PEAK-T curriculum: single-reversal "I-You" deictic frames.

PubMed

Belisle, Jordan; Dixon, Mark R; Stanley, Caleb R; Munoz, Bridget; Daar, Jacob H

2016-12-01

We taught basic perspective-taking tasks to 3 children with autism and evaluated their ability to derive mutually entailed single-reversal deictic relations of those newly established perspective-taking skills. Furthermore, we examined the possibility of transfers of perspective-taking function to novel untrained stimuli. The methods were taken from the PEAK-T training curriculum, and results yielded positive gains for all 3 children to learn basic perspective taking as well as for 2 of the 3 to derive untrained single-reversal I relations following direct training of single-reversal You relations. All participants demonstrated a transfer of stimulus function to untrained stimuli after the single-reversal deictic relations had been mastered. © 2016 Society for the Experimental Analysis of Behavior.

[Science of Meridians, Collaterals and Acupoints--Exploration on teaching method of meridian syndromes].

PubMed

Wang, Yinping; Zhang, Zongquan; Wang, Wenlin; Yuan, Limin

2015-04-01

Meridian syndromes are the required basic knowledge for mastering Science of Meridians, Collaterals and Acupoints but have not brought the adequate attention on the teaching program. The writers discovered' that the content of this section occupied a decisive role for developing the students' clinical thinking ability and, stimulating their interests to learn classical TCM theories. It's necessary to enhance the importance on meridian syndromes during teaching program. The teaching program was discussed in three aspects, named workshop pattern, competitive pattern and multimedia pattern. This teaching method may improve students' interests in the study on classical TCM theories, deepen the understanding on knowledge and motivate students' learning autonomy so that the teaching quality can be improved.

Volcanic facies architecture of an intra-arc strike-slip basin, Santa Rita Mountains, Southern Arizona

NASA Astrophysics Data System (ADS)

Busby, Cathy J.; Bassett, Kari N.

2007-09-01

The three-dimensional arrangement of volcanic deposits in strike-slip basins is not only the product of volcanic processes, but also of tectonic processes. We use a strike-slip basin within the Jurassic arc of southern Arizona (Santa Rita Glance Conglomerate) to construct a facies model for a strike-slip basin dominated by volcanism. This model is applicable to releasing-bend strike-slip basins, bounded on one side by a curved and dipping strike-slip fault, and on the other by curved normal faults. Numerous, very deep unconformities are formed during localized uplift in the basin as it passes through smaller restraining bends along the strike-slip fault. In our facies model, the basin fill thins and volcanism decreases markedly away from the master strike-slip fault (“deep” end), where subsidence is greatest, toward the basin-bounding normal faults (“shallow” end). Talus cone-alluvial fan deposits are largely restricted to the master fault-proximal (deep) end of the basin. Volcanic centers are sited along the master fault and along splays of it within the master fault-proximal (deep) end of the basin. To a lesser degree, volcanic centers also form along the curved faults that form structural highs between sub-basins and those that bound the distal ends of the basin. Abundant volcanism along the master fault and its splays kept the deep (master fault-proximal) end of the basin overfilled, so that it could not provide accommodation for reworked tuffs and extrabasinally-sourced ignimbrites that dominate the shallow (underfilled) end of the basin. This pattern of basin fill contrasts markedly with that of nonvolcanic strike-slip basins on transform margins, where clastic sedimentation commonly cannot keep pace with subsidence in the master fault-proximal end. Volcanic and subvolcanic rocks in the strike-slip basin largely record polygenetic (explosive and effusive) small-volume eruptions from many vents in the complexly faulted basin, referred to here as multi-vent complexes. Multi-vent complexes like these reflect proximity to a continuously active fault zone, where numerous strands of the fault frequently plumb small batches of magma to the surface. Releasing-bend extension promotes small, multivent styles of volcanism in preference to caldera collapse, which is more likely to form at releasing step-overs along a strike-slip fault.

1540-nm single frequency single-mode pulsed all fiber laser for coherent Doppler lidar

NASA Astrophysics Data System (ADS)

Zhang, Xin; Diao, Weifeng; Liu, Yuan; Liu, Jiqiao; Hou, Xia; Chen, Weibiao

2015-02-01

A single-mode single frequency eye-safe pulsed all fiber laser based on master oscillator power amplification structure is presented. This laser is composed of a narrow linewidth distributed laser diode seed laser and two-stage cascade amplifiers. 0.8 m longitudinally gradient strained erbium/ytterbium co-doped polarization-maintaining fiber with a core diameter of 10 μm is used as the gain fiber and two acoustic-optics modulators are adopted to enhance pulse extinction ratio. A peak power of 160 W and a pulse width of 200 ns at 10 kHz repetition rate are achieved with transform-limited linewidth and diffraction-limited beam quality. This laser will be employed in a compact short range coherent Doppler wind lidar.

Effects of Ordinary and Adaptive Toys on Pre-School Children with Developmental Disabilities

ERIC Educational Resources Information Center

Hsieh, Hsieh-Chun

2008-01-01

Toys help children in mastering developmental tasks. This study investigated toy effect on children with developmental disabilities as they engage in using ordinary and adaptive toys. A single-subject design was used to identify the effects on their toy play abilities. Differences in toy effects between playing ordinary and adaptive toys were…

77 FR 13141 - Notice of Intent To Prepare a Master Leasing Plan, Amendments to the Resource Management Plans...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... uses, livestock grazing, potash production, and oil and gas development. Interest in oil, gas, and... currently identified by a BLM interdisciplinary team include the following: air quality and climate change... single environmental impact statement (EIS) to consider leasing for oil and gas and potash on about 783...

MEMSlab: A Practical MEMS Course for the Fabrication, Packaging, and Testing of a Single-Axis Accelerometer

ERIC Educational Resources Information Center

Grundbacher, R.; Hoetzel, J. E.; Hierold, C.

2009-01-01

A microelectro-mechanical systems (MEMS) laboratory course (MEMSlab) in the Mechanical and Process Engineering Department at the Swiss Federal Institute of Technology (ETH Zurich), is presented. The course has been taught for four years and has been attended primarily by Master's students from mechanical and electrical engineering; since fall…

29 CFR 1910.184 - Slings.

Code of Federal Regulations, 2013 CFR

2013-07-01

... under the load and has both ends, end attachments, eyes or handles on the hook or a single master link... lifting hook. Cable laid endless sling-mechanical joint is a wire rope sling made endless by joining the.... N-184-1.) Handle eye is an opening in a handle of a metal mesh sling shaped to accept a hook...

29 CFR 1910.184 - Slings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... under the load and has both ends, end attachments, eyes or handles on the hook or a single master link... lifting hook. Cable laid endless sling-mechanical joint is a wire rope sling made endless by joining the.... N-184-1.) Handle eye is an opening in a handle of a metal mesh sling shaped to accept a hook...

29 CFR 1910.184 - Slings.

Code of Federal Regulations, 2012 CFR

2012-07-01

... under the load and has both ends, end attachments, eyes or handles on the hook or a single master link... lifting hook. Cable laid endless sling-mechanical joint is a wire rope sling made endless by joining the.... N-184-1.) Handle eye is an opening in a handle of a metal mesh sling shaped to accept a hook...

Site Planning: Auraria Higher Education Center.

ERIC Educational Resources Information Center

Auraria Higher Education Center, Denver, CO.

This book presents the site master plan for the Auraria Higher Education Center, which is dedicated to the offering of an urban-oriented program in higher education and is made up of three institutions -- the Denver Center of the University of Colorado, Metropolitan State College, and the Community College of Denver located on a single site in the…

Levels of Organization in the Structure of Awareness of Sport.

ERIC Educational Resources Information Center

Kahn, William; Laird, James D.

The relationship between athletic awareness and amount of exposure to sports is examined. Levels of organization theory assumes that a single situation can be experienced at different levels and that a given level cannot be mastered until competence has been achieved at the preceding lower level. For this study, it was hypothesized that basketball…

Analog design of wireless control for home equipment

NASA Astrophysics Data System (ADS)

Zheng, Shiyong; Li, Zhao; Li, Biqing; Jiang, Suping

2018-04-01

This design consists of a STC89C52 microcontroller, a serial Bluetooth module and the Android system. Production of STC89C52 controlled by single-chip computer telephone systems. The system is composed of mobile phone Android system as a master in the family centre,via serial Bluetooth module pass instructions and information to implement wireless transceiver using STC89C52 MCU wireless Bluetooth transmission to control homedevices. System high reliability, low cost easy to use, stong applicability and other characerristics, can be used in single-user family, has great significance.

Homework Interventions for Children with Attention and Learning Problems: Where Is the "Home" in "Homework?"

ERIC Educational Resources Information Center

Sheridan, Susan M.

2009-01-01

Homework is a reality in the lives of most American school children. At its best, homework is a highly useful and appropriate strategy. At its worst, it can wreak havoc in the lives of many children and families who fail to master behavioral and environmental routines that create conditions and patterns conducive for optimal performance. Thus,…

Printed Biopolymer-Based Electro-Optic Device Components

DTIC Science & Technology

2013-07-01

devices and fabricated e-beam lithography-based master molds. Printed micro and nanostructures using a newly developed spin-on nanoprinting (SNAP...polymeric materials. Among the natural biopolymers , deoxyribonucleic acid (DNA) is an attractive material which can be used to make electronic and...photonic devices [2, 3]. If patterned on the micro and nanoscale using a soft lithography technique, high quality biodegradable optical devices can be

Remote Tactile Displays for Future Soldiers

DTIC Science & Technology

2007-05-01

envisioned as an alternate means of communication for those who are visually 4 or hearing impaired. Oddly, the success of Braille “reading...designers. For example, simply embossing the alphabet in paper to read by touch succumbed to Braille because subtle spatial patterns easily apparent to...fashioned after the six- dot Braille system. Although an alphanumeric code was mastered with surprising rapidity, one striking difficulty emerged

The Artificial Eye: A Focal Plane Detector/Read-Out IC Imaging Array Fabrication on Interior Spherical Surfaces

DTIC Science & Technology

2008-08-07

photolithography. A curing agent and PDMS prepolymer were thoroughly mixed at a 1:7 weight ratio, followed by degassing for lh to remove all air bubbles and to...ensure complete mixing. The prepolymer was then poured onto the Si master and cured at 100°C for lh to form a stamp with duplicated patterns from the

Transfer molding processes for nanoscale patterning of poly-L-lactic acid (PLLA) films

NASA Astrophysics Data System (ADS)

Dhakal, Rabin; Peer, Akshit; Biswas, Rana; Kim, Jaeyoun

2016-03-01

Nanoscale patterned structures composed of biomaterials exhibit great potential for the fabrication of functional biostructures. In this paper, we report cost-effective, rapid, and highly reproducible soft lithographic transfer-molding techniques for creating periodic micro- and nano-scale textures on poly (L-lactic acid) (PLLA) surface. These artificial textures can increase the overall surface area and change the release dynamics of the therapeutic agents coated on it. Specifically, we use the double replication technique in which the master pattern is first transferred to the PDMS mold and the pattern on PDMS is then transferred to the PLLA films through drop-casting as well as nano-imprinting. The ensuing comparison studies reveal that the drop-cast PLLA allows pattern transfer at higher levels of fidelity, enabling the realization of nano-hole and nano-cone arrays with pitch down to ~700 nm. The nano-patterned PLLA film was then coated with rapamycin to make it drug-eluting.

A comparative evaluation of the marginal adaptation of a thermoplastic resin, a light cured wax and an inlay casting wax on stone dies: An in vitro study.

PubMed

Gopalan, Reji P; Nair, Vivek V; Harshakumar, K; Ravichandran, R; Lylajam, S; Viswambaran, Prasanth

2018-01-01

Different pattern materials do not produce copings with satisfactory, marginal accuracy when used on stone dies at varying time intervals. The purpose of this study was to evaluate and compare the vertical marginal accuracy of patterns formed from three materials, namely, thermoplastic resin, light cured wax and inlay casting wax at three-time intervals of 1, 12, and 24 h. A master die (zirconia abutment mimicking a prepared permanent maxillary central incisor) and metal sleeve (direct metal laser sintering crown #11) were fabricated. A total of 30 stone dies were obtained from the master die. Ten patterns were made each from the three materials and stored off the die at room temperature. The vertical marginal gaps were measured using digital microscope at 1, 12, and 24 h after reseating with gentle finger pressure. The results revealed a significant statistical difference in the marginal adaptation of three materials at all the three-time intervals. Light cured wax was found to be most accurate at all time intervals, followed by thermoplastic resin and inlay casting wax. Furthermore, there was a significant difference between all pairs of materials. The change in vertical marginal gap from 1 to 24 h between thermoplastic resin and light cured wax was not statistically significant. The marginal adaptation of all the three materials used, was well within the acceptable range of 25-70 μm. The resin pattern materials studied revealed significantly less dimensional change than inlay casting wax on storage at 1, 12, and 24 h time intervals. They may be employed in situations where high precision and delayed investing is expected.

Multiprocessor shared-memory information exchange

DOE Office of Scientific and Technical Information (OSTI.GOV)

Santoline, L.L.; Bowers, M.D.; Crew, A.W.

1989-02-01

In distributed microprocessor-based instrumentation and control systems, the inter-and intra-subsystem communication requirements ultimately form the basis for the overall system architecture. This paper describes a software protocol which addresses the intra-subsystem communications problem. Specifically the protocol allows for multiple processors to exchange information via a shared-memory interface. The authors primary goal is to provide a reliable means for information to be exchanged between central application processor boards (masters) and dedicated function processor boards (slaves) in a single computer chassis. The resultant Multiprocessor Shared-Memory Information Exchange (MSMIE) protocol, a standard master-slave shared-memory interface suitable for use in nuclear safety systems, ismore » designed to pass unidirectional buffers of information between the processors while providing a minimum, deterministic cycle time for this data exchange.« less

Imprint lithography template technology for bit patterned media (BPM)

NASA Astrophysics Data System (ADS)

Lille, J.; Patel, K.; Ruiz, R.; Wu, T.-W.; Gao, H.; Wan, Lei; Zeltzer, G.; Dobisz, E.; Albrecht, T. R.

2011-11-01

Bit patterned media (BPM) for magnetic recording has emerged as a promising technology to deliver thermally stable magnetic storage at densities beyond 1Tb/in2. Insertion of BPM into hard disk drives will require the introduction of nanoimprint lithography and other nanofabrication processes for the first time. In this work, we focus on nanoimprint and nanofabrication challenges that are being overcome in order to produce patterned media. Patterned media has created the need for new tools and processes, such as an advanced rotary e-beam lithography tool and block copolymer integration. The integration of block copolymer is through the use of a chemical contrast pattern on the substrate which guides the alignment of di-block copolymers. Most of the work on directed self assembly for patterned media applications has, until recently, concentrated on the formation of circular dot patterns in a hexagonal close packed lattice. However, interactions between the read head and media favor a bit aspect ratio (BAR) greater than one. This design constraint has motivated new approaches for using self-assembly to create suitable high-BAR master patterns and has implications for template fabrication.

Two-motor direct drive control for elevation axis of telescope

NASA Astrophysics Data System (ADS)

Tang, T.; Tan, Y.; Ren, G.

2014-07-01

Two-motor application has become a very attractive filed in important field which high performance is permitted to achieve of position, speed, and acceleration. In the elevation axis of telescope control system, two-motor direct drive is proposed to enhance the high performance of tracking control system. Although there are several dominant strengths such as low size of motors and high torsional structural dynamics, the synchronization control of two motors is a very difficult and important. In this paper, a multi-loop control technique base master-slave current control is used to synchronize two motors, including current control loop, speed control loop and position control loop. First, the direct drive function of two motors is modeled. Compared of single motor direct control system, the resonance frequency of two motor control systems is same; while the anti-resonance frequency of two motors control system is 1.414 times than those of sing motor system. Because of rigid coupling for direct drive, the speed of two motor of the system is same, and the synchronization of torque for motors is critical. The current master-slave control technique is effective to synchronize the torque, which the current loop of the master motors is tracked the other slave motor. The speed feedback into the input of current loop of the master motors. The experiments test the performance of the two motors drive system. The random tracking error is 0.0119" for the line trajectory of 0.01°/s.

Generalized EC&LSS computer program configuration control

NASA Technical Reports Server (NTRS)

Blakely, R. L.

1976-01-01

The generalized environmental control and life support system (ECLSS) computer program (G189A) simulation of the shuttle orbiter ECLSS was upgraded. The G189A component model configuration was changed to represent the current PV102 and subsequent vehicle ECLSS configurations as defined by baseline ARS and ATCS schematics. The diagrammatic output schematics of the gas, water, and freon loops were also revised to agree with the new ECLSS configuration. The accuracy of the transient analysis was enhanced by incorporating the thermal mass effects of the equipment, structure, and fluid in the ARS gas and water loops and in the ATCS freon loops. The sources of the data used to upgrade the simulation are: (1) ATCS freon loop line sizes and lengths; (2) ARS water loop line sizes and lengths; (3) ARS water loop and ATCS freon loop component and equipment weights; and (4) ARS cabin and avionics bay thermal capacitance and conductance values. A single G189A combination master program library tape was generated which contains all of the master program library versions which were previously maintained on separate tapes. A new component subroutine, PIPETL, was developed and incorporated into the G189A master program library.

The Master Equation for Two-Level Accelerated Systems at Finite Temperature

NASA Astrophysics Data System (ADS)

Tomazelli, J. L.; Cunha, R. O.

2016-10-01

In this work, we study the behaviour of two weakly coupled quantum systems, described by a separable density operator; one of them is a single oscillator, representing a microscopic system, while the other is a set of oscillators which perform the role of a reservoir in thermal equilibrium. From the Liouville-Von Neumann equation for the reduced density operator, we devise the master equation that governs the evolution of the microscopic system, incorporating the effects of temperature via Thermofield Dynamics formalism by suitably redefining the vacuum of the macroscopic system. As applications, we initially investigate the behaviour of a Fermi oscillator in the presence of a heat bath consisting of a set of Fermi oscillators and that of an atomic two-level system interacting with a scalar radiation field, considered as a reservoir, by constructing the corresponding master equation which governs the time evolution of both sub-systems at finite temperature. Finally, we calculate the energy variation rates for the atom and the field, as well as the atomic population levels, both in the inertial case and at constant proper acceleration, considering the two-level system as a prototype of an Unruh detector, for admissible couplings of the radiation field.

A/R/Tography and Teacher Education in the 21st Century

ERIC Educational Resources Information Center

Wiebe, Sean; Smith, Claire Caseley

2016-01-01

In this article, we summarize research on Prince Edward Island where a Prince Edward Island teacher, identifying as an a/r/tographer, designed a digital and multiliteracies unit, as part of a directed studies course in her Master of Education program. Small in scope, this single participant case study was designed to give a fuller picture to three…

Campaign 1984: Geraldine Ferraro vs. the Catholic Church and One Master Motive.

ERIC Educational Resources Information Center

Sullivan, Patricia A.

The discord between the Catholic Church and its followers in the United States crystallized with the candidacy of Geraldine Ferraro for vice president in 1984, when she became the target of attacks by members of the church hierarchy. Ferraro questioned why she was singled out on the abortion issue, and indeed, at times she seemed to be running…

Digital-data receiver synchronization

DOEpatents

Smith, Stephen F.; Turner, Gary W.

2005-08-02

Digital-data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock can be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

Digital-data receiver synchronization method and apparatus

DOEpatents

Smith, Stephen F.; Turner, Gary W.

2005-12-06

Digital-data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock may be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

Digital-data receiver synchronization method and apparatus

DOEpatents

Smith, Stephen F [Loudon, TN; Turner, Gary W [Clinton, TN

2009-09-08

Digital data receiver synchronization is provided with composite phase-frequency detectors, mutually cross-connected comparison feedback or both to provide robust reception of digital data signals. A single master clock can be used to provide frequency signals. Advantages can include fast lock-up time in moderately to severely noisy conditions, greater tolerance to noise and jitter when locked, and improved tolerance to clock asymmetries.

Visualizing individual sodium channels on the move.

PubMed

Heinemann, Stefan H

2012-07-27

Visualization of voltage-gated sodium channels at work is an important requirement for the understanding of rapid electrical signaling in nerve cells. In this issue of Chemistry & Biology, Ondrus and colleagues have mastered this challenge by chemical synthesis of a fluorescent antagonist and by monitoring single sodium channels in living cells with unprecedented optical resolution. Copyright © 2012 Elsevier Ltd. All rights reserved.

Languages for Learning: Granting All Students Access to New Skills. Fishman Prize Series

ERIC Educational Resources Information Center

Sanders, Steven; Zunkiewicz, Kelly; Strait, Laura; Towne, Michael

2014-01-01

A single great teacher can change a life by introducing a new language, helping you master a new skill or opening a door you never knew was there. That's why every year, TNTP awards the Fishman Prize for Superlative Classroom Practice: to celebrate a select cohort of public school teachers who demonstrate exceptionally effective teaching with…

From Intent to Action: An Iterative Engineering Process

ERIC Educational Resources Information Center

Mouton, Patrice; Rodet, Jacques; Vacaresse, Sylvain

2015-01-01

Quite by chance, and over the course of a few haphazard meetings, a Master's degree in "E-learning Design" gradually developed in a Faculty of Economics. Its original and evolving design was the result of an iterative process carried out, not by a single Instructional Designer (ID), but by a full ID team. Over the last 10 years it has…

Re-Imagining California Higher Education: Research & Occasional Papers Series: CSHE.14.10

ERIC Educational Resources Information Center

Douglass, John Aubrey

2010-01-01

2010 marks the 50th anniversary of California's famed Master Plan for Higher Education, arguably the single most influential effort to plan the future of a system of higher education in the annals of American higher education. This essay builds on the analysis offered in a previous CSHE research paper ("From Chaos to Order and Back") by…

OSTA data systems planning workshop recommendations

NASA Technical Reports Server (NTRS)

Desjardins, R.

1981-01-01

The Integrated Discipline Requirements are presented, including the following needs: (1) quality data sets, (2) a systematic treatment of problems with present data, (3) a single integrated catalog or master directory, (4) continuity of data formats, (5) a standard geographic and time basis, (6) data delivery in terms of easy rather than immediate accessibility, (7) data archives, and (8) cooperation with user agencies.

Galileo Timing Applications

DTIC Science & Technology

2007-11-01

available architecture for time and synchronization information distribution was at that time implemented with a single Master Clock. The signal of...a hierarchical approach. Moreover, analyzing this architecture , it is clear that there is signal performance degradation due to the distribution...applications. Figure 2 depicts the time distribution architecture implemented via GNSS. The main difference with respect to the previous one is that all the

Frequency Agile Tm,Ho:YLF Local Oscillator for a Scanning Doppler wind Lidar in Earth Orbit

NASA Technical Reports Server (NTRS)

Menzies, Robert T.; Hemmati, Hamid; Esproles, Carlos

1997-01-01

A compact cw Tm,Ho:YLF laser with single-mode tunability over +/-4 GHz has been developed into a modular unit containing an isolator and photomixer for offset tuning of the LO from a master oscillator which controls the frequency of a Doppler lidar transmitter. This and an alternative diode laser LO will be described.

Early Sentence Productions of 3- and 4-Year-Old Children Who Use Augmentative and Alternative Communication

PubMed Central

Kent-Walsh, Jennifer; King, Marika; Mansfield, Lindsay

2017-01-01

Purpose This study investigated the early rule-based sentence productions of 3- and 4-year-old children with severe speech disorders who used single-meaning graphic symbols to communicate. Method Ten 3- and 4-year-olds requiring the use of augmentative and alternative communication, who had largely intact receptive language skills, received instruction in producing up to four different semantic–syntactic targets using an Apple iPad with a communication app. A single-case, multiple-probe, across-targets design was used to assess the progress of each participant and target. Generalization to new vocabulary was assessed, and a subgroup also was taught to produce sentences using grammatical markers. Results Some targets (primarily possessor-entity) were mastered in the baseline phase, and the majority of the remaining targets were mastered during intervention. All four children who completed intervention for grammatical markers quickly learned to use the markers accurately. Conclusions Expressive language potential for preschoolers using graphic symbol–based augmentative and alternative communication systems should not be underestimated. With appropriate presentation and intervention techniques, some preschoolers with profound speech disorders can readily learn to produce rule-based messages via graphic symbols. PMID:28614575

Early Sentence Productions of 3- and 4-Year-Old Children Who Use Augmentative and Alternative Communication.

PubMed

Binger, Cathy; Kent-Walsh, Jennifer; King, Marika; Mansfield, Lindsay

2017-07-12

This study investigated the early rule-based sentence productions of 3- and 4-year-old children with severe speech disorders who used single-meaning graphic symbols to communicate. Ten 3- and 4-year-olds requiring the use of augmentative and alternative communication, who had largely intact receptive language skills, received instruction in producing up to four different semantic-syntactic targets using an Apple iPad with a communication app. A single-case, multiple-probe, across-targets design was used to assess the progress of each participant and target. Generalization to new vocabulary was assessed, and a subgroup also was taught to produce sentences using grammatical markers. Some targets (primarily possessor-entity) were mastered in the baseline phase, and the majority of the remaining targets were mastered during intervention. All four children who completed intervention for grammatical markers quickly learned to use the markers accurately. Expressive language potential for preschoolers using graphic symbol-based augmentative and alternative communication systems should not be underestimated. With appropriate presentation and intervention techniques, some preschoolers with profound speech disorders can readily learn to produce rule-based messages via graphic symbols.

Liouville master equation for multi-electron dynamics during ion-surface interactions

NASA Astrophysics Data System (ADS)

Wirtz, L.; Reinhold, C. O.; Lemell, C.; Burgdorfer, J.

2003-05-01

We present a simulation of the neutralization of highly charged ions in front of a LiF(100) surface including the close-collision regime above the surface. Our approach employs a Monte-Carlo solution of the Liouville master equation for the joint probability density of the ionic motion and the electronic population of the projectile and the target surface. It includes single as well as double particle-hole (de)excitation processes and incorporates electron correlation effects through the conditional dynamics of population strings. The input in terms of elementary one- and two-electron transfer rates is determined from CTMC calculations as well as quantum mechanical Auger calculations. For slow projectiles and normal incidence, the ionic motion depends sensitively on the interplay between image acceleration towards the surface and repulsion by an ensemble of positive hole charges in the surface (``trampoline effect"). For Ne10+ ions we find that image acceleration dominates and no collective backscattering high above the surface takes place. For grazing incidence, our simulation delineates the pathways to complete neutralization. In accordance with recent experimental observations, most ions are reflected as neutrals or even as singly charged negative particles, irrespective of the charge state of the incoming ion.

A microfluidic platform for chemical stimulation and real time analysis of catecholamine secretion from neuroendocrine cells.

PubMed

Ges, Igor A; Brindley, Rebecca L; Currie, Kevin P M; Baudenbacher, Franz J

2013-12-07

Release of neurotransmitters and hormones by calcium-regulated exocytosis is a fundamental cellular process that is disrupted in a variety of psychiatric, neurological, and endocrine disorders. As such, there is significant interest in targeting neurosecretion for drug and therapeutic development, efforts that will be aided by novel analytical tools and devices that provide mechanistic insight coupled with increased experimental throughput. Here, we report a simple, inexpensive, reusable, microfluidic device designed to analyze catecholamine secretion from small populations of adrenal chromaffin cells in real time, an important neuroendocrine component of the sympathetic nervous system and versatile neurosecretory model. The device is fabricated by replica molding of polydimethylsiloxane (PDMS) using patterned photoresist on silicon wafer as the master. Microfluidic inlet channels lead to an array of U-shaped "cell traps", each capable of immobilizing single or small groups of chromaffin cells. The bottom of the device is a glass slide with patterned thin film platinum electrodes used for electrochemical detection of catecholamines in real time. We demonstrate reliable loading of the device with small populations of chromaffin cells, and perfusion/repetitive stimulation with physiologically relevant secretagogues (carbachol, PACAP, KCl) using the microfluidic network. Evoked catecholamine secretion was reproducible over multiple rounds of stimulation, and graded as expected to different concentrations of secretagogue or removal of extracellular calcium. Overall, we show this microfluidic device can be used to implement complex stimulation paradigms and analyze the amount and kinetics of catecholamine secretion from small populations of neuroendocrine cells in real time.

Master Amino acid Pattern as substitute for dietary proteins during a weight-loss diet to achieve the body's nitrogen balance equilibrium with essentially no calories.

PubMed

Lucà-Moretti, M; Grandi, A; Lucà, E; Muratori, G; Nofroni, M G; Mucci, M P; Gambetta, P; Stimolo, R; Drago, P; Giudice, G; Tamburlin, N

2003-01-01

Results of this multicentric study have shown that by giving 10 g (10 tablets) of Master Amino acid Pattern (MAP) as a substitute for dietary proteins, once a day, to 114 overweight participants undergoing the American Nutrition Clinics/Overweight Management Program (ANC/OMP), the participants' nitrogen balance could be maintained in equilibrium with essentially no calories (MAP 1 g=0.04 kcal), thereby preserving the body's structural and functional proteins, eliminating excessive water retention from the interstitial compartment, and preventing the sudden weight increase after study conclusion commonly known as the yo-yo effect. Study results have shown that the use of MAP, in conjunction with the ANC/OMP, has proven to be safe and effective by preventing those adverse effects associated with a negative nitrogen balance, such as oversized or flabby tissue, stretch marks, sagging of breast tissue, increased hair loss, faded hair color, and fragile or brittle nails. Also preventing those anomalies commonly associated with weight-loss diets, such as hunger, weakness, headache caused by ketosis, constipation, or decreased libido, the use of MAP, in conjunction with the ANC/OMP, allowed for mean weight loss of 1.4 kg (3 lb) per week.

15 W high OSNR kHz-linewidth linearly-polarized all-fiber single-frequency MOPA at 1.6 μm.

PubMed

Yang, Changsheng; Guan, Xianchao; Zhao, Qilai; Lin, Wei; Li, Can; Gan, Jiulin; Qian, Qi; Feng, Zhouming; Yang, Zhongmin; Xu, Shanhui

2018-05-14

A 1603 nm high optical signal-to-noise ratio (OSNR) kHz-linewidth linearly-polarized all-fiber single-frequency master-oscillator power amplifier (MOPA) is demonstrated. To suppress the amplified spontaneous emission from Yb 3+ /Er 3+ ions with the customized filters and optimize the length of the double cladding active fiber, an over 15 W stable single-longitudinal-mode laser is achieved with an OSNR of >70 dB. A measured laser linewidth of 4.5 kHz and a polarization-extinction ratio of >23 dB are obtained at the full output power. This L-band high-power single-frequency MOPA is promising for high-resolution molecular spectroscopy and pumping of Tm 3+ -doped or Tm 3+ /Ho 3+ co-doped laser.

Time-Temperature Superposition to Determine the Stress-Rupture of Aramid Fibres

NASA Astrophysics Data System (ADS)

Alwis, K. G. N. C.; Burgoyne, C. J.

2006-07-01

Conventional creep testing takes a long time to obtain stress-rupture data for aramid fibres at the low stress levels likely to be used in practical applications. However, the rate of creep of aramid can be accelerated by a thermally activated process to obtain the failure of fibres within a few hours. It is possible to obtain creep curves at different temperature levels which can be shifted along the time axis to generate a single curve know as a master curve, from which stress-rupture data can be obtained. This technique is known as the time-temperature superposition principle and will be applied to Kevlar 49 yarns. Important questions relating to the techniques needed to obtain smooth master curves will be discussed, as will the validity the resulting curves and the corresponding stress-rupture lifetime.

Control strategies for a telerobot

NASA Technical Reports Server (NTRS)

Ohara, John; Stasi, Bill

1989-01-01

One of the major issues impacting the utility of telerobotic systems for space is the development of effective control strategies. For near-term applications, telerobot control is likely to utilize teleoperation methodologies with integrated supervisory control capabilities to assist the operator. Two different approaches to telerobotic control are evaluated: bilateral force reflecting master controllers and proportional rate six degrees-of-freedom hand controllers. The controllers' performance of single manipulator arm tasks is compared. Simultaneous operation of both manipulator arms and complex multiaxis slave arm movements is investigated. Task times are significantly longer and fewer errors are committed with the hand controllers. The hand controllers are also rated significantly higher in cognitive and manual control workload on the two-arm task. The master controllers are rated significantly higher in physical workload. The implications of these findings for space teleoperations and higher levels of control are discussed.

Supermode noise suppression with mutual injection locking for coupled optoelectronic oscillator.

PubMed

Dai, Jian; Liu, Anni; Liu, Jingliang; Zhang, Tian; Zhou, Yue; Yin, Feifei; Dai, Yitang; Liu, Yuanan; Xu, Kun

2017-10-30

The coupled optoelectronic oscillator (COEO) is typically used to generate high frequency spectrally pure microwave signal with serious sidemodes noise. We propose and experimentally demonstrate a simple scheme for supermode suppression with mutual injection locking between the COEO (master oscillator with multi-modes oscillation) and the embedded free-running oscillator (slave oscillator with single-mode oscillation). The master and slave oscillators share the same electrical feedback path, which means that the mutually injection-locked COEO brings no additional hardware complexity. Owing to the mode matching and mutually injection locking effect, 9.999 GHz signal has been successfully obtained by the mutually injection-locked COEO with the phase noise about -117 dBc/Hz at 10 kHz offset frequency. Besides, the supermode noise can be significantly suppressed more than 50 dB to below -120 dBc.

Recurrent emergence of structural variants of LTR retrotransposon CsRn1 evolving novel expression strategy and their selective expansion in a carcinogenic liver fluke, Clonorchis sinensis.

PubMed

Kim, Seon-Hee; Kong, Yoon; Bae, Young-An

2017-06-01

Autonomous retrotransposons, in which replication and transcription are coupled, encode the essential gag and pol genes as a fusion or separate overlapping form(s) that are expressed in single transcripts regulated by a common upstream promoter. The element-specific expression strategies have driven development of relevant translational recoding mechanisms including ribosomal frameshifting to satisfy the protein stoichiometry critical for the assembly of infectious virus-like particles. Retrotransposons with different recoding strategies exhibit a mosaic distribution pattern across the diverse families of reverse transcribing elements, even though their respective distributions are substantially skewed towards certain family groups. However, only a few investigations to date have focused on the emergence of retrotransposons evolving novel expression strategy and causal genetic drivers of the structural variants. In this study, the bulk of genomic and transcribed sequences of a Ty3/gypsy-like CsRn1 retrotransposon in Clonorchis sinensis were analyzed for the comprehensive examination of its expression strategy. Our results demonstrated that structural variants with single open reading frame (ORF) have recurrently emerged from precedential CsRn1 copies encoding overlapping gag-pol ORFs by a single-nucleotide insertion in an upstream region of gag stop codon. In the parasite genome, some of the newly evolved variants appeared to undergo proliferative burst as active master lineages together with their ancestral copies. The genetic event was similarly observed in Opisthorchis viverrini, the closest neighbor of C. sinensis, whereas the resulting structural variants might have failed to overcome purifying selection and comprised minor remnant copies in the Opisthorchis genome. Copyright © 2017 Elsevier B.V. All rights reserved.

Single-mode single-frequency high peak power all-fiber MOPA at 1550 nm

NASA Astrophysics Data System (ADS)

Kotov, L. V.; Likhachev, M. E.; Bubnov, M. M.; Paramonov, V. M.; Belovolov, M. I.; Lipatov, D. S.; Guryanov, A. N.

2014-10-01

In this Report, we present a record-high-peak-power single-frequency master oscillator power amplifier (MOPA) system based on a newly developed double-clad large-mode-area Yb-free Er-doped fiber (DC-LMA-EDF). A fiber Bragg grating wavelength-stabilized fiber-coupled diode laser at λ=1551 nm with ~2 MHz spectral width was used as the master oscillator. Its radiation was externally modulated with a 5 kHz repetition rate and 92 ns pulse duration and then amplified in a core-pumped Er-doped fiber amplifier up to an average power of 4 mW. The amplified spontaneous emission (ASE) generated at the last preamplifier stage was suppressed by a narrow-band (0.7 nm) DWDM filter. The last MOPA stage was based on the recently developed single-mode DC-LMA-EDF with a mode field diameter of 25 microns and pump clad-absorption of 3 dB/m at λ=980 nm. The pump and the signal were launched into this fiber through a commercial pump combiner in a co-propagating amplifier scheme. At first, we used a 3-m long DC-LMAEDF. In such configuration, a peak power of 800 W was achieved at the output of the amplifier together with a ~ 12 % pump conversion slope efficiency. Further power scaling was limited by SBS. After that we shortened the fiber length to 1 m. As a result, owing to large unabsorbed pump power, the efficiency decreased to ~5 %. However, a peak power of more than 3.5 kW was obtained before the SBS threshold. In this case, the pulse shape changed and its duration decreased to ~60 ns owing to inversion depletion after propagation of the forward front of the pulse. To the best of our knowledge, the peak power of more than 3.5 kW reported here is the highest value ever published for a single-frequency single-mode silica-based fiber laser system operating near λ=1550 nm.

1.5 W high efficiency and tunable single-longitudinal-mode Ho:YLF ring laser based on Faraday effect.

PubMed

Wu, Jing; Ju, Youlun; Dai, Tongyu; Yao, Baoquan; Wang, Yuezhu

2017-10-30

We demonstrated an efficient and tunable single-longitudinal-mode Ho:YLF ring laser based on Faraday effect for application to measure atmospheric carbon dioxide (CO 2 ). Single-longitudinal-mode power at 2051.65 nm achieved 528 mW with the slope efficiency of 39.5% and the M 2 factor of 1.07, and the tunable range of about 178 GHz was obtained by inserting a Fabry-Perot (F-P) etalon with the thickness of 0.5 mm. In addition, the maximum single-longitudinal-mode power reached 1.5 W with the injected power of 528 mW at 2051.65 nm by master oscillator power amplifier (MOPA) technique. High efficiency and tunable single-longitudinal-mode based on Faraday effect around 2 μm has not been reported yet to the best of our knowledge.

Statistical Analyses for Probabilistic Assessments of the Reactor Pressure Vessel Structural Integrity: Building a Master Curve on an Extract of the 'Euro' Fracture Toughness Dataset, Controlling Statistical Uncertainty for Both Mono-Temperature and multi-temperature tests

DOE Office of Scientific and Technical Information (OSTI.GOV)

Josse, Florent; Lefebvre, Yannick; Todeschini, Patrick

2006-07-01

Assessing the structural integrity of a nuclear Reactor Pressure Vessel (RPV) subjected to pressurized-thermal-shock (PTS) transients is extremely important to safety. In addition to conventional deterministic calculations to confirm RPV integrity, Electricite de France (EDF) carries out probabilistic analyses. Probabilistic analyses are interesting because some key variables, albeit conventionally taken at conservative values, can be modeled more accurately through statistical variability. One variable which significantly affects RPV structural integrity assessment is cleavage fracture initiation toughness. The reference fracture toughness method currently in use at EDF is the RCCM and ASME Code lower-bound K{sub IC} based on the indexing parameter RT{submore » NDT}. However, in order to quantify the toughness scatter for probabilistic analyses, the master curve method is being analyzed at present. Furthermore, the master curve method is a direct means of evaluating fracture toughness based on K{sub JC} data. In the framework of the master curve investigation undertaken by EDF, this article deals with the following two statistical items: building a master curve from an extract of a fracture toughness dataset (from the European project 'Unified Reference Fracture Toughness Design curves for RPV Steels') and controlling statistical uncertainty for both mono-temperature and multi-temperature tests. Concerning the first point, master curve temperature dependence is empirical in nature. To determine the 'original' master curve, Wallin postulated that a unified description of fracture toughness temperature dependence for ferritic steels is possible, and used a large number of data corresponding to nuclear-grade pressure vessel steels and welds. Our working hypothesis is that some ferritic steels may behave in slightly different ways. Therefore we focused exclusively on the basic french reactor vessel metal of types A508 Class 3 and A 533 grade B Class 1, taking the sampling level and direction into account as well as the test specimen type. As for the second point, the emphasis is placed on the uncertainties in applying the master curve approach. For a toughness dataset based on different specimens of a single product, application of the master curve methodology requires the statistical estimation of one parameter: the reference temperature T{sub 0}. Because of the limited number of specimens, estimation of this temperature is uncertain. The ASTM standard provides a rough evaluation of this statistical uncertainty through an approximate confidence interval. In this paper, a thorough study is carried out to build more meaningful confidence intervals (for both mono-temperature and multi-temperature tests). These results ensure better control over uncertainty, and allow rigorous analysis of the impact of its influencing factors: the number of specimens and the temperatures at which they have been tested. (authors)« less

Post Graduate Programme in Dietetics & Food Service Management (MSCDFSM) Programme of IGNOU: Access through the Lucknow Regional Centre

ERIC Educational Resources Information Center

Dorothy, J. S.; Kumar, Ashwini

2014-01-01

Indira Gandhi National Open University (IGNOU) which was established initially as a Single mode Distance Teaching Institution (DTI) in the year 1985 opened its campus to face-to-face education in the year 2008 and thus now is a Dual mode Distance Teaching Institution (DTI). The Post Graduate Programme (Master of Science) in Dietetics and Food…

Studies on Vapor Adsorption Systems

NASA Technical Reports Server (NTRS)

Shamsundar, N.; Ramotowski, M.

1998-01-01

The project consisted of performing experiments on single and dual bed vapor adsorption systems, thermodynamic cycle optimization, and thermal modeling. The work was described in a technical paper that appeared in conference proceedings and a Master's thesis, which were previously submitted to NASA. The present report describes some additional thermal modeling work done subsequently, and includes listings of computer codes developed during the project. Recommendations for future work are provided.

Analytic descriptions of stochastic bistable systems under force ramp

DOE PAGES

Friddle, Raymond W.

2016-05-13

Solving the two-state master equation with time-dependent rates, the ubiquitous driven bistable system, is a long-standing problem that does not permit a complete solution for all driving rates. We show an accurate approximation to this problem by considering the system in the control parameter regime. Moreover, the results are immediately applicable to a diverse range of bistable systems including single-molecule mechanics.

Small Data, Online Learning and Assessment Practices in Higher Education: A Case Study of Failure?

ERIC Educational Resources Information Center

Watson, Cate; Wilson, Anna; Drew, Valerie; Thompson, Terrie Lynn

2017-01-01

In this paper, we present an in-depth case study of a single student who failed an online module which formed part of a master's programme in Professional Education and Leadership. We use this case study to examine assessment practices in higher education in the online environment. In taking this approach, we go against the current predilection…

Teachers' Perceptions of the Influence of Assessment on Their Teaching of Year 9 English

ERIC Educational Resources Information Center

Portelli, Leanne; O'Sullivan, Kerry-Ann

2016-01-01

This article draws from a Masters research study investigating the early implementation of the NSW English K-10 Syllabus in Year 9 with a focus on, teachers' perceptions of the various forms and purposes of assessment and the role these play in the classroom. The five participants were drawn from one English faculty in a single sex school in the…

A System Approach to Navy Medical Education and Training. Appendix 45. Competency Curricula for Dental Prosthetic Assistant and Dental Prosthetic Technician.

DTIC Science & Technology

1974-08-31

Removable Partial Dentures ..................... 34 XI. Fixed Partial Denture Construction .. ........ 35 l. Construct Master Cast with Removable...Dies . . . 36 2. Construct Patterns for Fixed Partial Dentures .. . ..... 37 3. Spruing and Investing oeu . . . 38 4. Wax Elimination and Casting...42 S. Re3in Jacket Crowns . . ............ 43 9. Temporary Crowns and Fixed Partial Dentures . . 44 10. Post and Core Techniques . . o

Evolutionary Co-Option of Floral Meristem Identity Genes for Patterning of the Flower-Like Asteraceae Inflorescence.

PubMed

Zhao, Yafei; Zhang, Teng; Broholm, Suvi K; Tähtiharju, Sari; Mouhu, Katriina; Albert, Victor A; Teeri, Teemu H; Elomaa, Paula

2016-09-01

The evolutionary success of Asteraceae, the largest family of flowering plants, has been attributed to the unique inflorescence architecture of the family, which superficially resembles an individual flower. Here, we show that Asteraceae inflorescences (flower heads, or capitula) resemble solitary flowers not only morphologically but also at the molecular level. By conducting functional analyses for orthologs of the flower meristem identity genes LEAFY (LFY) and UNUSUAL FLORAL ORGANS (UFO) in Gerbera hybrida, we show that GhUFO is the master regulator of flower meristem identity, while GhLFY has evolved a novel, homeotic function during the evolution of head-like inflorescences. Resembling LFY expression in a single flower meristem, uniform expression of GhLFY in the inflorescence meristem defines the capitulum as a determinate structure that can assume floral fate upon ectopic GhUFO expression. We also show that GhLFY uniquely regulates the ontogeny of outer, expanded ray flowers but not inner, compact disc flowers, indicating that the distinction of different flower types in Asteraceae is connected with their independent evolutionary origins from separate branching systems. © 2016 American Society of Plant Biologists. All rights reserved.

Tunable single-longitudinal-mode operation of an injection-locked TEA CO2 laser. [ozone absorption spectroscopy

NASA Technical Reports Server (NTRS)

Megie, G.; Menzies, R. T.

1979-01-01

The tunable single-longitudinal-mode operation of a TEA CO2 laser by an injection technique using a CW waveguide laser as the master oscillator is reported. With the experimental arrangement described, in which the waveguide laser frequency is tuned to correspond to one of the oscillating longitudinal modes of the TEA laser, single-longitudinal-mode operation was achieved with no apparent reduction in the TEA output energy, on various CO2 lines with frequency offsets from the line center as large as 300 MHz. The capability of this technique for high-resolution spectroscopy or atmospheric lidar studies is demonstrated by the recording of the absorption spectrum of a strong ozone line.

Exploring the folding pattern of a polymer chain in a single crystal by combining single-molecule force spectroscopy and steered molecular dynamics simulations.

PubMed

Song, Yu; Feng, Wei; Liu, Kai; Yang, Peng; Zhang, Wenke; Zhang, Xi

2013-03-26

Understanding the folding pattern of a single polymer chain within its single crystal will shed light on the mechanism of crystallization. Here, we use the combined techniques of atomic force microscopy (AFM)-based single-molecule force spectroscopy (SMFS) and steered molecular dynamics (SMD) simulations to study the folding pattern of a polyethylene oxide (PEO) chain in its single crystal. Our results show that the folding pattern of a PEO chain in the crystal formed in dilute solution follows the adjacent re-entry folding model. While in the crystal obtained from the melt, the nonadjacent folding with large and irregular loops contributes to big force fluctuations in the force-extension curves. The method established here can offer a novel strategy to directly unravel the chain-folding pattern of polymer single crystals at single-molecule level.

Decision Support in a Changing and Contentious World--Successfully Supporting the Development of a 50-year Comprehensive Coastal Master Plan in Louisiana

NASA Astrophysics Data System (ADS)

Groves, D.

2014-12-01

After the devastating 2005 hurricane season, Louisiana embarked on an ambitious and daunting effort to develop and implement a comprehensive Coastal Master Plan. The Master Plan sought to achieve two key goals simultaneously: reduce hurricane flood risk and halt the net conversion of its coastal landscape to open ocean. Numerous prior efforts to achieve these goals had been tried without significant success. In 2012, however, the Louisiana Coastal Protection and Restoration Authority (CPRA) produced a 50-year, $50 billion Master Plan. It had broad support from a diverse and often adversarial set of stakeholders, and it was unanimously passed by the Louisiana legislature. In contrast to other efforts, CPRA took an approach to planning called by the U.S. National Research Council as "deliberation with analysis". Specifically, CPRA used data, models, and decision support tools not to define an optimal or best strategy, but instead to support stakeholder dialogue and deliberations over alterative coastal management strategies. RAND researchers, with the support of CPRA and other collaborators, developed the planning tool at the center of this process. The CPRA planning tool synthesized large amounts of information about how the coast might evolve over time with and without different combinations of hundreds of different projects and programs. The tool helped CPRA propose alternative strategies that could achieve the State's goals while also highlighting to stakeholders the key tradeoffs among them. Importantly, this process helped bring diverse communities together to support a single vision and specific set of projects and programs to meet many of Louisiana's coastal water resources challenges. This presentation will describe the planning approach and decision support tools developed to support the Master Plan's participatory stakeholder process. The presentation will also highlight several important key takeaway messages that have broad applicability to other water resources planning efforts. Lastly, it will describe several on-going efforts in other parts of the U.S. that are employing this same approach.

Report of the River Master of the Delaware River for the period December 1, 2008–November 30, 2009

USGS Publications Warehouse

Krejmas, Bruce E.; Paulachok, Gary N.; Mason, Jr., Robert R.; Owens, Marie

2016-04-06

A Decree of the Supreme Court of the United States, entered June 7, 1954, established the position of Delaware River Master within the U.S. Geological Survey (USGS). In addition, the Decree authorizes diversions of water from the Delaware River Basin and requires compensating releases from certain reservoirs, owned by New York City, to be made under the supervision and direction of the River Master. The Decree stipulates that the River Master will furnish reports to the Court, not less frequently than annually. This report is the 56th Annual Report of the River Master of the Delaware River. It covers the 2009 River Master report year, the period from December 1, 2008, to November 30, 2009.During the report year, precipitation in the upper Delaware River Basin was 50.89 inches (in.) or 116 percent of the long-term average. Combined storage in Pepacton, Cannonsville, and Neversink Reservoirs remained high throughout the year and did not decline below 80 percent of combined capacity at any time. Delaware River operations during the year were conducted as stipulated by the Decree and the Flexible Flow Management Program (FFMP).Diversions from the Delaware River Basin by New York City and New Jersey were in full compliance with the Decree. Reservoir releases were made as directed by the River Master at rates designed to meet the flow objective for the Delaware River at Montague, New Jersey, on 25 days during the report year. Releases were made at conservation rates—rates designed to relieve thermal stress and protect the fishery and aquatic habitat in the tailwaters of the reservoirs—on all other days.During the report year, New York City and New Jersey complied fully with the terms of the Decree, and directives and requests of the River Master.As part of a long-term program, the quality of water in the Delaware Estuary between Trenton, New Jersey, and Reedy Island Jetty, Delaware, was monitored at various locations. Data on water temperature, specific conductance, dissolved oxygen, and pH were collected continuously by electronic instruments at four sites. In addition, selected water-quality data were collected at 22 sites on a monthly basis.The Delaware River Basin Commission (DRBC) collects monthly samples from March through October at 22 sites between Biles Channel and South Brown Shoal. Samples were collected and analyzed by the State of Delaware for the DRBC. At each site, water samples were collected at a single point near the center of the channel near the surface and analyzed for selected physical properties, and chemical and biological constituents including routine chemical substances, nutrients and bacteria. These consist of analyses of field measurements and laboratory determinations.

Analysis decorating design on Perahu Buatan Barat, the Malay traditional boat by using frieze pattern

NASA Astrophysics Data System (ADS)

Wahab, Mohd Rohaizat Abdul; Ramli, Zuliskandar; Zakaria, Ros Mahwati Ahmad; Samad, Mohammad Anis Abdul

2017-01-01

Boat building tradition is one of the skills mastered by Malay craftsmen. Decoration on the Perahu Buatan Barat, the Malay traditional boat is one of the uniqueness of the production of traditional boats in East Coast of Malaysia. The tradition of Malay boat building, each plank was given specific names based on the line of planks. There is one line called `papan tarik' or `papan cantik' was usually decorated with paintings by a variety of motifs and patterns from the bow to the stern of the boat. The motifs usually taken from the surrounding environment as well as flora and fauna will be painted with motifs repeated but with differing formations. The aim of this study is to identify the motifs and analyze the formation of motifs by using mathematical methods of frieze pattern.

Designed tools for analysis of lithography patterns and nanostructures

NASA Astrophysics Data System (ADS)

Dervillé, Alexandre; Baderot, Julien; Bernard, Guilhem; Foucher, Johann; Grönqvist, Hanna; Labrosse, Aurélien; Martinez, Sergio; Zimmermann, Yann

2017-03-01

We introduce a set of designed tools for the analysis of lithography patterns and nano structures. The classical metrological analysis of these objects has the drawbacks of being time consuming, requiring manual tuning and lacking robustness and user friendliness. With the goal of improving the current situation, we propose new image processing tools at different levels: semi automatic, automatic and machine-learning enhanced tools. The complete set of tools has been integrated into a software platform designed to transform the lab into a virtual fab. The underlying idea is to master nano processes at the research and development level by accelerating the access to knowledge and hence speed up the implementation in product lines.

A Comparison between Shear Bond Strength of VMK Master Porcelain with Three Base-metal Alloys (Ni-cr-T3, VeraBond, Super Cast) and One Noble Alloy (X-33) in Metal-ceramic Restorations

PubMed Central

Ahmadzadeh, A; Neshati, A; Mousavi, N; Epakchi, S; Dabaghi Tabriz, F; Sarbazi, AH

2013-01-01

Statement of Problem: The increase in the use of metal-ceramic restorations and a high prevalence of porcelain chipping entails introducing an alloy which is more compatible with porcelain and causes a stronger bond between the two. This study is to compare shear bond strength of three base-metal alloys and one noble alloy with the commonly used VMK Master Porcelain. Materials and Method: Three different groups of base-metal alloys (Ni-cr-T3, Super Cast, and VeraBond) and one group of noble alloy (X-33) were selected. Each group consisted of 15 alloy samples. All groups went through the casting process and change from wax pattern into metal disks. The VMK Master Porcelain was then fired on each group. All the specimens were put in the UTM; a shear force was loaded until a fracture occurred and the fracture force was consequently recorded. The data were analyzed by SPSS Version 16 and One-Way ANOVA was run to compare the shear strength between the groups. Furthermore, the groups were compared two-by-two by adopting Tukey test. Results: The findings of this study revealed shear bond strength of Ni-Cr-T3 alloy was higher than the three other alloys (94 MPa or 330 N). Super Cast alloy had the second greatest shear bond strength (80. 87Mpa or 283.87 N). Both VeraBond (69.66 MPa or 245 N) and x-33 alloys (66.53 MPa or 234 N) took the third place. Conclusion: Ni-Cr-T3 with VMK Master Porcelain has the greatest shear bond strength. Therefore, employment of this low-cost alloy is recommended in metal-ceramic restorations. PMID:24724144

Time-Series INSAR: An Integer Least-Squares Approach For Distributed Scatterers

NASA Astrophysics Data System (ADS)

Samiei-Esfahany, Sami; Hanssen, Ramon F.

2012-01-01

The objective of this research is to extend the geode- tic mathematical model which was developed for persistent scatterers to a model which can exploit distributed scatterers (DS). The main focus is on the integer least- squares framework, and the main challenge is to include the decorrelation effect in the mathematical model. In order to adapt the integer least-squares mathematical model for DS we altered the model from a single master to a multi-master configuration and introduced the decorrelation effect stochastically. This effect is described in our model by a full covariance matrix. We propose to de- rive this covariance matrix by numerical integration of the (joint) probability distribution function (PDF) of interferometric phases. This PDF is a function of coherence values and can be directly computed from radar data. We show that the use of this model can improve the performance of temporal phase unwrapping of distributed scatterers.

Compact, passively Q-switched, all-solid-state master oscillator-power amplifier-optical parametric oscillator (MOPA-OPO) system pumped by a fiber-coupled diode laser generating high-brightness, tunable, ultraviolet radiation.

PubMed

Peuser, Peter; Platz, Willi; Fix, Andreas; Ehret, Gerhard; Meister, Alexander; Haag, Matthias; Zolichowski, Paul

2009-07-01

We report on a compact, tunable ultraviolet laser system that consists of an optical parametric oscillator (OPO) and a longitudinally diode-pumped Nd:YAG master oscillator-power amplifier (MOPA). The pump energy for the whole laser system is supplied via a single delivery fiber. Nanosecond pulses are produced by an oscillator that is passively Q-switched by a Cr(4+):YAG crystal. The OPO is pumped by the second harmonic of the Nd:YAG MOPA. Continuously tunable radiation is generated by an intracavity sum-frequency mixing process within the OPO in the range of 245-260 nm with high beam quality. Maximum pulse energies of 1.2 mJ were achieved, which correspond to an optical efficiency of 3.75%, relating to the pulse energy of the MOPA at 1064 nm.

Corresponding states law for a generalized Lennard-Jones potential.

PubMed

Orea, P; Romero-Martínez, A; Basurto, E; Vargas, C A; Odriozola, G

2015-07-14

It was recently shown that vapor-liquid coexistence densities derived from Mie and Yukawa models collapse to define a single master curve when represented against the difference between the reduced second virial coefficient at the corresponding temperature and that at the critical point. In this work, we further test this proposal for another generalization of the Lennard-Jones pair potential. This is carried out for vapor-liquid coexistence densities, surface tension, and vapor pressure, along a temperature window set below the critical point. For this purpose, we perform molecular dynamics simulations by varying the potential softness parameter to produce from very short to intermediate attractive ranges. We observed all properties to collapse and yield master curves. Moreover, the vapor-liquid curve is found to share the exact shape of the Mie and attractive Yukawa. Furthermore, the surface tension and the logarithm of the vapor pressure are linear functions of this difference of reduced second virial coefficients.

Nondimensional scaling of magnetorheological rotary shear mode devices using the Mason number

NASA Astrophysics Data System (ADS)

Becnel, Andrew C.; Sherman, Stephen; Hu, Wei; Wereley, Norman M.

2015-04-01

Magnetorheological fluids (MRFs) exhibit rapidly adjustable viscosity in the presence of a magnetic field, and are increasingly used in adaptive shock absorbers for high speed impacts, corresponding to high fluid shear rates. However, the MRF properties are typically measured at very low (γ ˙<1000 s-1) shear rates due to limited commercial rheometer capabilities. A custom high shear rate (γ ˙>10,000 s-1) Searle cell magnetorheometer, along with a full scale rotary-vane magnetorheological energy absorber (γ ˙>25,000 s-1) are employed to analyze MRF property scaling across shear rates using a nondimensional Mason number to generate an MRF master curve. Incorporating a Reynolds temperature correction factor, data from both experiments is shown to collapse to a single master curve, supporting the use of Mason number to correlate low- and high-shear rate characterization data.

Comparison of Kato-Katz thick-smear and McMaster egg counting method for the assessment of drug efficacy against soil-transmitted helminthiasis in school children in Jimma Town, Ethiopia.

PubMed

Bekana, Teshome; Mekonnen, Zeleke; Zeynudin, Ahmed; Ayana, Mio; Getachew, Mestawet; Vercruysse, Jozef; Levecke, Bruno

2015-10-01

There is a paucity of studies that compare efficacy of drugs obtained by different diagnostic methods. We compared the efficacy of a single oral dose albendazole (400 mg), measured as egg reduction rate, against soil-transmitted helminth infections in 210 school children (Jimma Town, Ethiopia) using both Kato-Katz thick smear and McMaster egg counting method. Our results indicate that differences in sensitivity and faecal egg counts did not imply a significant difference in egg reduction rate estimates. The choice of a diagnostic method to assess drug efficacy should not be based on sensitivity and faecal egg counts only. © The Author 2015. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

LSST camera control system

NASA Astrophysics Data System (ADS)

Marshall, Stuart; Thaler, Jon; Schalk, Terry; Huffer, Michael

2006-06-01

The LSST Camera Control System (CCS) will manage the activities of the various camera subsystems and coordinate those activities with the LSST Observatory Control System (OCS). The CCS comprises a set of modules (nominally implemented in software) which are each responsible for managing one camera subsystem. Generally, a control module will be a long lived "server" process running on an embedded computer in the subsystem. Multiple control modules may run on a single computer or a module may be implemented in "firmware" on a subsystem. In any case control modules must exchange messages and status data with a master control module (MCM). The main features of this approach are: (1) control is distributed to the local subsystem level; (2) the systems follow a "Master/Slave" strategy; (3) coordination will be achieved by the exchange of messages through the interfaces between the CCS and its subsystems. The interface between the camera data acquisition system and its downstream clients is also presented.

Two-dimensional single-cell patterning with one cell per well driven by surface acoustic waves

PubMed Central

Collins, David J.; Morahan, Belinda; Garcia-Bustos, Jose; Doerig, Christian; Plebanski, Magdalena; Neild, Adrian

2015-01-01

In single-cell analysis, cellular activity and parameters are assayed on an individual, rather than population-average basis. Essential to observing the activity of these cells over time is the ability to trap, pattern and retain them, for which previous single-cell-patterning work has principally made use of mechanical methods. While successful as a long-term cell-patterning strategy, these devices remain essentially single use. Here we introduce a new method for the patterning of multiple spatially separated single particles and cells using high-frequency acoustic fields with one cell per acoustic well. We characterize and demonstrate patterning for both a range of particle sizes and the capture and patterning of cells, including human lymphocytes and red blood cells infected by the malarial parasite Plasmodium falciparum. This ability is made possible by a hitherto unexplored regime where the acoustic wavelength is on the same order as the cell dimensions. PMID:26522429

AREB1, AREB2, and ABF3 are master transcription factors that cooperatively regulate ABRE-dependent ABA signaling involved in drought stress tolerance and require ABA for full activation.

PubMed

Yoshida, Takuya; Fujita, Yasunari; Sayama, Hiroko; Kidokoro, Satoshi; Maruyama, Kyonoshin; Mizoi, Junya; Shinozaki, Kazuo; Yamaguchi-Shinozaki, Kazuko

2010-02-01

A myriad of drought stress-inducible genes have been reported, and many of these are activated by abscisic acid (ABA). In the promoter regions of such ABA-regulated genes, conserved cis-elements, designated ABA-responsive elements (ABREs), control gene expression via bZIP-type AREB/ABF transcription factors. Although all three members of the AREB/ABF subfamily, AREB1, AREB2, and ABF3, are upregulated by ABA and water stress, it remains unclear whether these are functional homologs. Here, we report that all three AREB/ABF transcription factors require ABA for full activation, can form hetero- or homodimers to function in nuclei, and can interact with SRK2D/SnRK2.2, an SnRK2 protein kinase that was identified as a regulator of AREB1. Along with the tissue-specific expression patterns of these genes and the subcellular localization of their encoded proteins, these findings clearly indicate that AREB1, AREB2, and ABF3 have largely overlapping functions. To elucidate the role of these AREB/ABF transcription factors, we generated an areb1 areb2 abf3 triple mutant. Large-scale transcriptome analysis, which showed that stress-responsive gene expression is remarkably impaired in the triple mutant, revealed novel AREB/ABF downstream genes in response to water stress, including many LEA class and group-Ab PP2C genes and transcription factors. The areb1 areb2 abf3 triple mutant is more resistant to ABA than are the other single and double mutants with respect to primary root growth, and it displays reduced drought tolerance. Thus, these results indicate that AREB1, AREB2, and ABF3 are master transcription factors that cooperatively regulate ABRE-dependent gene expression for ABA signaling under conditions of water stress.

Isolation of a pH-Sensitive IgNAR Variable Domain from a Yeast-Displayed, Histidine-Doped Master Library.

PubMed

Könning, Doreen; Zielonka, Stefan; Sellmann, Carolin; Schröter, Christian; Grzeschik, Julius; Becker, Stefan; Kolmar, Harald

2016-04-01

In recent years, engineering of pH-sensitivity into antibodies as well as antibody-derived fragments has become more and more attractive for biomedical and biotechnological applications. Herein, we report the isolation of the first pH-sensitive IgNAR variable domain (vNAR), which was isolated from a yeast-displayed, semi-synthetic master library. This strategy enables the direct identification of pH-dependent binders from a histidine-enriched CDR3 library. Displayed vNAR variants contained two histidine substitutions on average at random positions in their 12-residue CDR3 loop. Upon screening of seven rounds against the proof-of-concept target EpCAM (selection for binding at pH 7.4 and decreased binding at pH 6.0), a single clone was obtained that showed specific and pH-dependent binding as characterized by yeast surface display and biolayer interferometry. Potential applications for such pH-dependent vNAR domains include their employment in tailored affinity chromatography, enabling mild elution protocols. Moreover, utilizing a master library for the isolation of pH-sensitive vNAR variants may be a generic strategy to obtain binding entities with prescribed characteristics for applications in biotechnology, diagnostics, and therapy.

EPA FRS Facilities Combined File CSV Download for the Marshall Islands

EPA Pesticide Factsheets

The Facility Registry System (FRS) identifies facilities, sites, or places subject to environmental regulation or of environmental interest to EPA programs or delegated states. Using vigorous verification and data management procedures, FRS integrates facility data from program national systems, state master facility records, tribal partners, and other federal agencies and provides the Agency with a centrally managed, single source of comprehensive and authoritative information on facilities.

Evaluation of Alternative Means of Implementing Section 1362 of the National Flood Insurance Act of 1968.

DTIC Science & Technology

1981-03-01

Near the Regulated Floodplain. Research paper submitted in partial fulfillment of the requirements for the deuree of Master of Science , Dept. of...discretionary funds, and private corporations and foundations . 17. Soldiers Grove, Wisconsin. The city has begun to acquire its central business...for single-farily homes) * Data on Federal Disaster relief expenditures analyzed for this study ** Estimated average acturial rate of critical

Summary of Research 1997, Department of Aeronautics and Astronautics

DTIC Science & Technology

1999-01-01

military space planes ; (2) stability and control of single and dual-spin spacecraft; and (3) near-Earth-object interception. The research has lead...rectilinear cascade wind tunnel. Second generation blading, having approximately half the solidity of the first- generation design, when operated at...Control of an Unmanned Aerial Vehicle for Precise Navigation in the Local Tangent Plane ," Master’s Thesis, Naval Postgraduate School, March 1997

Master Amino acid Pattern as sole and total substitute for dietary proteins during a weight-loss diet to achieve the body's nitrogen balance equilibrium.

PubMed

Lucà-Moretti, M; Grandi, A; Lucà, E; Muratori, G; Nofroni, M G; Mucci, M P; Gambetta, P; Stimolo, R; Drago, P; Giudice, G; Tamburlin, N; Karbalai, M; Valente, C; Moras, G

2003-01-01

Results of this multicentric study have shown that by giving Master Amino acid Pattern (MAP) as a sole and total substitute of dietary proteins to 500 overweight participants undergoing the American Nutrition Clinics/Overweight Management Program (ANC/OMP), the participants' body nitrogen balance could be maintained in equilibrium with essentially no calories (MAP 1 g=0.04 kcal), thereby preserving the body's structural and functional proteins, eliminating excessive water retention from the interstitial compartment, and preventing the sudden weight increase after study conclusion commonly known as the yo-yo effect. Study results have shown that the use of MAP, in conjunction with the ANC/OMP regimen, has proven to be safe and effective by preventing those adverse effects associated with a negative nitrogen balance, such as oversized or flabby tissue, stretch marks, the sagging of breast tissue, increased hair loss, faded hair color, and fragile or brittle nails. Also prevented were those anomalies commonly associated with weight-loss diets, such as hunger, weakness, headache caused by ketosis, constipation, and decreased libido. The use of MAP in conjunction with the ANC/OMP also allowed for mean weight loss of 2.5 kg (5.5 lb) per week, achieved through reduction of excessive fat tissue and elimination of excessive water retention from the interstitial compartment.

The ATLAS Data Acquisition System in LHC Run 2

NASA Astrophysics Data System (ADS)

Panduro Vazquez, William; ATLAS Collaboration

2017-10-01

The LHC has been providing pp collisions with record luminosity and energy since the start of Run 2 in 2015. The Trigger and Data Acquisition system of the ATLAS experiment has been upgraded to deal with the increased performance required by this new operational mode. The dataflow system and associated network infrastructure have been reshaped in order to benefit from technological progress and to maximize the flexibility and efficiency of the data selection process. The new design is radically different from the previous implementation both in terms of architecture and performance, with the previous two-level structure merged into a single processing farm, performing incremental data collection and analysis. In addition, logical farm slicing, with each slice managed by a dedicated supervisor, has been dropped in favour of global management by a single farm master operating at 100 kHz. This farm master has also been integrated with a new software-based Region of Interest builder, replacing the previous VMEbus-based system. Finally, the Readout system has been completely refitted with new higher performance, lower footprint server machines housing a new custom front-end interface card. Here we will cover the overall design of the system, along with performance results from the start-up phase of LHC Run 2.

Liouville master equation for multielectron dynamics: Neutralization of highly charged ions near a LiF surface

NASA Astrophysics Data System (ADS)

Wirtz, Ludger; Reinhold, Carlos O.; Lemell, Christoph; Burgdörfer, Joachim

2003-01-01

We present a simulation of the neutralization of highly charged ions in front of a lithium fluoride surface including the close-collision regime above the surface. The present approach employs a Monte Carlo solution of the Liouville master equation for the joint probability density of the ionic motion and the electronic population of the projectile and the target surface. It includes single as well as double particle-hole (de)excitation processes and incorporates electron correlation effects through the conditional dynamics of population strings. The input in terms of elementary one- and two-electron transfer rates is determined from classical trajectory Monte Carlo calculations as well as quantum-mechanical Auger calculations. For slow projectiles and normal incidence, the ionic motion depends sensitively on the interplay between image acceleration towards the surface and repulsion by an ensemble of positive hole charges in the surface (“trampoline effect”). For Ne10+ we find that image acceleration is dominant and no collective backscattering high above the surface takes place. For grazing incidence, our simulation delineates the pathways to complete neutralization. In accordance with recent experimental observations, most ions are reflected as neutral or even as singly charged negative particles, irrespective of the charge state of the incoming ions.

Econophysics: Master curve for price-impact function

NASA Astrophysics Data System (ADS)

Lillo, Fabrizio; Farmer, J. Doyne; Mantegna, Rosario N.

2003-01-01

The price reaction to a single transaction depends on transaction volume, the identity of the stock, and possibly many other factors. Here we show that, by taking into account the differences in liquidity for stocks of different size classes of market capitalization, we can rescale both the average price shift and the transaction volume to obtain a uniform price-impact curve for all size classes of firm for four different years (1995-98). This single-curve collapse of the price-impact function suggests that fluctuations from the supply-and-demand equilibrium for many financial assets, differing in economic sectors of activity and market capitalization, are governed by the same statistical rule.

Efficient spin-current injection in single-molecule magnet junctions

NASA Astrophysics Data System (ADS)

Xie, Haiqing; Xu, Fuming; Jiao, Hujun; Wang, Qiang; Liang, J.-Q.

2018-01-01

We study theoretically spin transport through a single-molecule magnet (SMM) in the sequential and cotunneling regimes, where the SMM is weakly coupled to one ferromagnetic and one normal-metallic leads. By a master-equation approach, it is found that the spin polarization injected from the ferromagnetic lead is amplified and highly polarized spin-current can be generated, due to the exchange coupling between the transport electron and the anisotropic spin of the SMM. Moreover, the spin-current polarization can be tuned by the gate or bias voltage, and thus an efficient spin injection device based on the SMM is proposed in molecular spintronics.

Technical knowledge and skills development in the informal sector in Kenya: The case of custom tailors

NASA Astrophysics Data System (ADS)

Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

2017-06-01

Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of technical skills and knowledge which tailoring apprentices develop, and the factors which influence these outcomes. The findings show that apprentices do acquire basic technical skills for immediate application to ongoing tailoring activities (such as how to take body measurements, draft patterns, and cut, sew and finish constructed garments). However, apprentices do not acquire the technical knowledge that underpins the trade. Most master tailors who have completed TAs lack technical knowledge and have no access to technical skills upgrading. This perpetuates the cycle of basic and limited technical skills transfer to apprentices, poor performance and poverty among tailors. Both apprentices and master tailors expressed concern over knowledge limitations in TAs and a need to access further training to improve skills and acquire knowledge of the trade. The authors of this article argue that, technically and pedagogically, skilled master tailors are critical to improving training quality. Complementary training in theoretical knowledge is also important in improving apprentices' technical skills and understanding of the trade. Inclusion of TAs in government policy may help ensure sustainable improvement of skills.

Biological Rhythms in the Skin

PubMed Central

Matsui, Mary S.; Pelle, Edward; Dong, Kelly; Pernodet, Nadine

2016-01-01

Circadian rhythms, ≈24 h oscillations in behavior and physiology, are reflected in all cells of the body and function to optimize cellular functions and meet environmental challenges associated with the solar day. This multi-oscillatory network is entrained by the master pacemaker located in the suprachiasmatic nucleus (SCN) of the hypothalamus, which directs an organism’s rhythmic expression of physiological functions and behavior via a hierarchical system. This system has been highly conserved throughout evolution and uses transcriptional–translational autoregulatory loops. This master clock, following environmental cues, regulates an organism’s sleep pattern, body temperature, cardiac activity and blood pressure, hormone secretion, oxygen consumption and metabolic rate. Mammalian peripheral clocks and clock gene expression have recently been discovered and are present in all nucleated cells in our body. Like other essential organ of the body, the skin also has cycles that are informed by this master regulator. In addition, skin cells have peripheral clocks that can function autonomously. First described in 2000 for skin, this review summarizes some important aspects of a rapidly growing body of research in circadian and ultradian (an oscillation that repeats multiple times during a 24 h period) cutaneous rhythms, including clock mechanisms, functional manifestations, and stimuli that entrain or disrupt normal cycling. Some specific relationships between disrupted clock signaling and consequences to skin health are discussed in more depth in the other invited articles in this IJMS issue on Sleep, Circadian Rhythm and Skin. PMID:27231897

Cell-autonomous mechanisms of chronological aging in the yeast Saccharomyces cerevisiae.

PubMed

Arlia-Ciommo, Anthony; Leonov, Anna; Piano, Amanda; Svistkova, Veronika; Titorenko, Vladimir I

2014-05-27

A body of evidence supports the view that the signaling pathways governing cellular aging - as well as mechanisms of their modulation by longevity-extending genetic, dietary and pharmacological interventions - are conserved across species. The scope of this review is to critically analyze recent advances in our understanding of cell-autonomous mechanisms of chronological aging in the budding yeast Saccharomyces cerevisiae . Based on our analysis, we propose a concept of a biomolecular network underlying the chronology of cellular aging in yeast. The concept posits that such network progresses through a series of lifespan checkpoints. At each of these checkpoints, the intracellular concentrations of some key intermediates and products of certain metabolic pathways - as well as the rates of coordinated flow of such metabolites within an intricate network of intercompartmental communications - are monitored by some checkpoint-specific "master regulator" proteins. The concept envisions that a synergistic action of these master regulator proteins at certain early-life and late-life checkpoints modulates the rates and efficiencies of progression of such processes as cell metabolism, growth, proliferation, stress resistance, macromolecular homeostasis, survival and death. The concept predicts that, by modulating these vital cellular processes throughout lifespan (i.e., prior to an arrest of cell growth and division, and following such arrest), the checkpoint-specific master regulator proteins orchestrate the development and maintenance of a pro- or anti-aging cellular pattern and, thus, define longevity of chronologically aging yeast.

Accuracy of single-abutment digital cast obtained using intraoral and cast scanners.

PubMed

Lee, Jae-Jun; Jeong, Ii-Do; Park, Jin-Young; Jeon, Jin-Hun; Kim, Ji-Hwan; Kim, Woong-Chul

2017-02-01

Scanners are frequently used in the fabrication of dental prostheses. However, the accuracy of these scanners is variable, and little information is available. The purpose of this in vitro study was to compare the accuracy of cast scanners with that of intraoral scanners by using different image impression techniques. A poly(methyl methacrylate) master model was fabricated to replicate a maxillary first molar single-abutment tooth model. The master model was scanned with an accurate engineering scanner to obtain a true value (n=1) and with 2 intraoral scanners (CEREC Bluecam and CEREC Omnicam; n=6 each). The cast scanner scanned the master model and duplicated the dental stone cast from the master model (n=6). The trueness and precision of the data were measured using a 3-dimensional analysis program. The Kruskal-Wallis test was used to compare the different sets of scanning data, followed by a post hoc Mann-Whitney U test with a significance level modified by Bonferroni correction (α/6=.0083). The type 1 error level (α) was set at .05. The trueness value (root mean square: mean ±standard deviation) was 17.5 ±1.8 μm for the Bluecam, 13.8 ±1.4 μm for the Omnicam, 17.4 ±1.7 μm for cast scanner 1, and 12.3 ±0.1 μm for cast scanner 2. The differences between the Bluecam and the cast scanner 1 and between the Omnicam and the cast scanner 2 were not statistically significant (P>.0083), but a statistically significant difference was found between all the other pairs (P<.0083). The precision of the scanners was 12.7 ±2.6 μm for the Bluecam, 12.5 ±3.7 μm for the Omnicam, 9.2 ±1.2 μm for cast scanner 1, and 6.9 ±2.6 μm for cast scanner 2. The differences between Bluecam and Omnicam and between Omnicam and cast scanner 1 were not statistically significant (P>.0083), but there was a statistically significant difference between all the other pairs (P<.0083). An Omnicam in video image impression had better trueness than a cast scanner but with a similar level of precision. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

A microfluidic platform for chemical stimulation and real time analysis of catecholamine secretion from neuroendocrine cells

PubMed Central

Ges, Igor A.; Brindley, Rebecca L.; Currie, Kevin P.M.; Baudenbacher, Franz J.

2013-01-01

Release of neurotransmitters and hormones by calcium-regulated exocytosis is a fundamental cellular process that is disrupted in a variety of psychiatric, neurological, and endocrine disorders. As such, there is significant interest in targeting neurosecretion for drug and therapeutic development, efforts that will be aided by novel analytical tools and devices that provide mechanistic insight coupled with increased experimental throughput. Here, we report a simple, inexpensive, reusable, microfluidic device designed to analyze catecholamine secretion from small populations of adrenal chromaffin cells in real time, an important neuroendocrine component of the sympathetic nervous system and versatile neurosecretory model. The device is fabricated by replica molding of polydimethylsiloxane (PDMS) using patterned photoresist on silicon wafer as the master. Microfluidic inlet channels lead to an array of U-shaped “cell traps”, each capable of immobilizing single or small groups of chromaffin cells. The bottom of the device is a glass slide with patterned thin film platinum electrodes used for electrochemical detection of catecholamines in real time. We demonstrate reliable loading of the device with small populations of chromaffin cells, and perfusion / repetitive stimulation with physiologically relevant secretagogues (carbachol, PACAP, KCl) using the microfluidic network. Evoked catecholamine secretion was reproducible over multiple rounds of stimulation, and graded as expected to different concentrations of secretagogue or removal of extracellular calcium. Overall, we show this microfluidic device can be used to implement complex stimulation paradigms and analyze the amount and kinetics of catecholamine secretion from small populations of neuroendocrine cells in real time. PMID:24126415

[Pattern of injuries and prophylaxis in paragliding].

PubMed

Schulze, W; Hesse, B; Blatter, G; Schmidtler, B; Muhr, G

2000-06-01

This study will present trends and recommendations to increase active and passive safety in paragliding on the basis of current state-of-the-art equipment and typical patterns of injury. This German-Swiss teamwork presents data of 55 male and 9 female patients treated after paragliding accidents between 1994 to 1998 respectively 1996 to 1998. 43.7% of the pilots presented with multiple injuries, 62.5% suffered spinal fractures and 18.8% pelvic fractures. 28.4% of the injured pilots were admitted with injuries of the lower extremities mainly affecting the tarsus or the ankle joint. Only three patients with single injuries could be treated in an ambulatory setting. 54.0% of the injuries left the patients with lasting functional residues and complaints. Main causes of accidents were either pilot error in handling the paraglider or general lack of awareness about potential risk factors. 46.0% of injuries occurred during landing, 42.9% of injuries during the flight and another 11.1% of injuries during starting procedures. With noticeable enhanced performance sails of the beginners and intermediate level are increasingly popular. Protective helmets and sturdy footwear reaching above the ankle joint are indispensable pieces of equipment. The use of protective gloves is highly recommended. Back protection devices of the new generation provide the best passive prophylaxis for the pilot against pelvic and spinal cord injuries. This area hold the most promise for increasing safety and reducing risk of injury in future, apart from using beginners and intermediate wings. After acquisition of the pilot license performance and security training provide the best preparing to master unforeseeable situations.

High resolution PFPE-based molding High resolution PFPE-based molding High resolution PFPE-based molding techniques for nanofabrication of high pattern density sub-20 nm features: A fundamental materials approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Stuart S; Samulski, Edward; Lopez, Renee

2010-01-01

ABSTRACT. Described herein is the development and investigation of PFPE-based elastomers for high resolution replica molding applications. The modulus of the elastomeric materials was increased through synthetic and additive approaches while maintaining relatively low surface energies (<25 mN/m). Using practically relevant large area master templates, we show that the resolution of the molds is strongly dependant upon the elastomeric mold modulus. A composite mold approach was used to form flexible molds out of stiff, high modulus materials that allow for replication of sub-20 nm post structures. Sub-100 nm line grating master templates, formed using e-beam lithography, were used to determinemore » the experimental stability of the molding materials. It was observed that as the feature spacing decreased, high modulus composite molds were able to effectively replicate the nano-grating structures without cracking or tear-out defects that typically occur with high modulus elastomers.« less

Evaluation of anti-sticking layers performances for 200mm wafer scale Smart NILTM process through surface and defectivity characterizations

NASA Astrophysics Data System (ADS)

Delachat, F.; Phillipe, J.-C.; Larrey, V.; Fournel, F.; Bos, S.; Teyssèdre, H.; Chevalier, Xavier; Nicolet, Célia; Navarro, Christophe; Cayrefourcq, Ian

2018-03-01

In this work, an evaluation of various ASL processes for 200 mm wafer scale in the HERCULES® NIL equipment platform available at the CEA-Leti through the INSPIRE program is reported. The surface and adherence energies were correlated to the AFM and defectivity results in order to select the most promising ASL process for high resolution etch mask applications. The ASL performances of the selected process were evaluated by multiple working stamp fabrication using unpatterned and patterned masters though defectivity monitoring on optical based-inspection tools. Optical and SEM defect reviews were systematically performed. Multiple working stamps fabrication without degradation of the master defectivity was witnessed. This evaluation enabled to benchmark several ASL solutions based on the grafted technology develop by ARKEMA in order to reduce and optimize the soft stamp defectivity prior to its replication and therefore considerably reduce the final imprint defectivity for the Smart NIL process.

Connecting Systems Model Design to Decision-Maker and Stakeholder Needs: Lessons from Louisiana's Coastal Master Plan

NASA Astrophysics Data System (ADS)

Fischbach, J. R.; Johnson, D.

2017-12-01

Louisiana's Comprehensive Master Plan for a Sustainable Coast is a 50-year plan designed to reduce flood risk and minimize land loss while allowing for the continued provision of economic and ecosystem services from this critical coastal region. Conceived in 2007 in response to hurricanes Katrina and Rita in 2005, the master plan is updated on a five-year planning cycle by the state's Coastal Protection and Restoration Authority (CPRA). Under the plan's middle-of-the-road (Medium) environmental scenario, the master plan is projected to reduce expected annual damage from storm surge flooding by approximately 65% relative to a future without action: from 5.3 billion to 2.2 billion in 2040, and from 12.1 billion to 3.7 billion in 2065. The Coastal Louisiana Risk Assessment model (CLARA) is used to estimate the risk reduction impacts of projects that have been considered for implementation as part of the plan. Evaluation of projects involves estimation of cost effectiveness in multiple future time periods and under a range of environmental uncertainties (e.g., the rates of sea level rise and land subsidence, changes in future hurricane intensity and frequency), operational uncertainties (e.g., system fragility), and economic uncertainties (e.g., patterns of population change and asset exposure). Between the 2012 and 2017 planning cycles, many improvements were made to the CLARA model. These included changes to the model's spatial resolution and definition of policy-relevant spatial units, an improved treatment of parametric uncertainty and uncertainty propagation between model components, the addition of a module to consider critical infrastructure exposure, and a new population growth model. CPRA also developed new scenarios for analysis in 2017 that were responsive to new scientific literature and to accommodate a new approach to modeling coastal morphology. In this talk, we discuss how CLARA has evolved over the 2012 and 2017 planning cycles in response to the needs of policy makers and CPRA managers. While changes will be illustrated through examples from Louisiana's 2017 Coastal Master Plan, we endeavor to provide generalizable and actionable insights about how modeling choices should be guided by the decision support process being used by planners.

Snake velvet black: Hierarchical micro- and nanostructure enhances dark colouration in Bitis rhinoceros

NASA Astrophysics Data System (ADS)

Spinner, Marlene; Kovalev, Alexander; Gorb, Stanislav N.; Westhoff, Guido

2013-05-01

The West African Gaboon viper (Bitis rhinoceros) is a master of camouflage due to its colouration pattern. Its skin is geometrically patterned and features black spots that purport an exceptional spatial depth due to their velvety surface texture. Our study shades light on micromorphology, optical characteristics and principles behind such a velvet black appearance. We revealed a unique hierarchical pattern of leaf-like microstructures striated with nanoridges on the snake scales that coincides with the distribution of black colouration. Velvet black sites demonstrate four times lower reflectance and higher absorbance than other scales in the UV - near IR spectral range. The combination of surface structures impeding reflectance and absorbing dark pigments, deposited in the skin material, provides reflecting less than 11% of the light reflected by a polytetrafluoroethylene diffuse reflectance standard in any direction. A view-angle independent black structural colour in snakes is reported here for the first time.

Automated deep-phenotyping of the vertebrate brain

PubMed Central

Allalou, Amin; Wu, Yuelong; Ghannad-Rezaie, Mostafa; Eimon, Peter M; Yanik, Mehmet Fatih

2017-01-01

Here, we describe an automated platform suitable for large-scale deep-phenotyping of zebrafish mutant lines, which uses optical projection tomography to rapidly image brain-specific gene expression patterns in 3D at cellular resolution. Registration algorithms and correlation analysis are then used to compare 3D expression patterns, to automatically detect all statistically significant alterations in mutants, and to map them onto a brain atlas. Automated deep-phenotyping of a mutation in the master transcriptional regulator fezf2 not only detects all known phenotypes but also uncovers important novel neural deficits that were overlooked in previous studies. In the telencephalon, we show for the first time that fezf2 mutant zebrafish have significant patterning deficits, particularly in glutamatergic populations. Our findings reveal unexpected parallels between fezf2 function in zebrafish and mice, where mutations cause deficits in glutamatergic neurons of the telencephalon-derived neocortex. DOI: http://dx.doi.org/10.7554/eLife.23379.001 PMID:28406399

Snake velvet black: hierarchical micro- and nanostructure enhances dark colouration in Bitis rhinoceros.

PubMed

Spinner, Marlene; Kovalev, Alexander; Gorb, Stanislav N; Westhoff, Guido

2013-01-01

The West African Gaboon viper (Bitis rhinoceros) is a master of camouflage due to its colouration pattern. Its skin is geometrically patterned and features black spots that purport an exceptional spatial depth due to their velvety surface texture. Our study shades light on micromorphology, optical characteristics and principles behind such a velvet black appearance. We revealed a unique hierarchical pattern of leaf-like microstructures striated with nanoridges on the snake scales that coincides with the distribution of black colouration. Velvet black sites demonstrate four times lower reflectance and higher absorbance than other scales in the UV-near IR spectral range. The combination of surface structures impeding reflectance and absorbing dark pigments, deposited in the skin material, provides reflecting less than 11% of the light reflected by a polytetrafluoroethylene diffuse reflectance standard in any direction. A view-angle independent black structural colour in snakes is reported here for the first time.

Isoform-level gene expression patterns in single-cell RNA-sequencing data.

PubMed

Vu, Trung Nghia; Wills, Quin F; Kalari, Krishna R; Niu, Nifang; Wang, Liewei; Pawitan, Yudi; Rantalainen, Mattias

2018-02-27

RNA sequencing of single cells enables characterization of transcriptional heterogeneity in seemingly homogeneous cell populations. Single-cell sequencing has been applied in a wide range of researches fields. However, few studies have focus on characterization of isoform-level expression patterns at the single-cell level. In this study we propose and apply a novel method, ISOform-Patterns (ISOP), based on mixture modeling, to characterize the expression patterns of isoform pairs from the same gene in single-cell isoform-level expression data. We define six principal patterns of isoform expression relationships and describe a method for differential-pattern analysis. We demonstrate ISOP through analysis of single-cell RNA-sequencing data from a breast cancer cell line, with replication in three independent datasets. We assigned the pattern types to each of 16,562 isoform-pairs from 4,929 genes. Among those, 26% of the discovered patterns were significant (p<0.05), while remaining patterns are possibly effects of transcriptional bursting, drop-out and stochastic biological heterogeneity. Furthermore, 32% of genes discovered through differential-pattern analysis were not detected by differential-expression analysis. The effect of drop-out events, mean expression level, and properties of the expression distribution on the performances of ISOP were also investigated through simulated datasets. To conclude, ISOP provides a novel approach for characterization of isoformlevel preference, commitment and heterogeneity in single-cell RNA-sequencing data. The ISOP method has been implemented as a R package and is available at https://github.com/nghiavtr/ISOP under a GPL-3 license. mattias.rantalainen@ki.se. Supplementary data are available at Bioinformatics online.

Force spectroscopy of quadruple H-bonded dimers by AFM: dynamic bond rupture and molecular time-temperature superposition.

PubMed

Zou, Shan; Schönherr, Holger; Vancso, G Julius

2005-08-17

We report on the application of the time-temperature superposition principle to supramolecular bond-rupture forces on the single-molecule level. The construction of force-loading rate master curves using atomic force microscopy (AFM)-based single-molecule force spectroscopy (SMFS) experiments carried out in situ at different temperatures allows one to extend the limited range of the experimentally accessible loading rates and hence to cross from thermodynamic nonequilibrium to quasi-equilibrium states. The approach is demonstrated for quadruple H-bonded ureido-4[1H]-pyrimidinone (UPy) moieties studied by variable-temperature SMFS in organic media. The unbinding forces of single quadruple H-bonding (UPy)2 complexes, which were identified based on a polymeric spacer strategy, were found to depend on the loading rate in the range of 5 nN/s to 500 nN/s at 301 K in hexadecane. By contrast, these rupture forces were independent of the loading rate from 5 to 200 nN/s at 330 K. These results indicate that the unbinding behavior of individual supramolecular complexes can be directly probed under both thermodynamic nonequilibrium and quasi-equilibrium conditions. On the basis of the time-temperature superposition principle, a master curve was constructed for a reference temperature of 301 K, and the crossover force (from loading-rate independent to -dependent regimes) was determined as approximately 145 pN (at a loading rate of approximately 5.6 nN/s). This approach significantly broadens the accessible loading-rate range and hence provides access to fine details of potential energy landscape of supramolecular complexes based on SMFS experiments.

Fatigue crack tip deformation and fatigue crack propagation

NASA Technical Reports Server (NTRS)

Kang, T. S.; Liu, H. W.

1972-01-01

The effects of stress ratio, prestress cycling and plate thickness on the fatigue crack propagation rate are studied on 2024-T351 aluminum alloy. Fatigue crack propagation rate increases with the plate thickness and the stress ratio. Prestress cycling below the static yield strength has no noticeable effect on the fatigue crack propagation rate. However, prestress cycling above the static yield strength causes the material to strain harden and increases the fatigue crack propagation rate. Crack tip deformation is used to study the fatigue crack propagation. The crack tip strains and the crack opening displacements were measured from moire fringe patterns. The moire fringe patterns were obtained by a double exposure technique, using a very high density master grille (13,400 lines per inch).

Consolidated Cab Display (CCD) System, Project Planning Document (PPD),

DTIC Science & Technology

1981-02-01

1980 1981 I 2 3 4 5 6 7 8 9 10 1112 1 2 3 4 5 6 7 8 9 1011112 1 2 31 12. Software Documentation a. Overall Computer Program Description ( OCPD ) b...Approve OCPD c. Computer Program Functional Specifications (CPFS) d. Data Base Table Design Specification (DBTDS) e. Software Interface Control Document...Parts List Master Pattern and Plan View Reproducible Drawings Instruction Book Training Aids/Materials b. Software: OCPD CPFS SI CD PDS DBTDS SDD

"If There Is a Job Description I Don't Think I've Read One": A Case Study of Programme Leadership in a UK Pre-1992 University

ERIC Educational Resources Information Center

Mitchell, Rafael

2015-01-01

This paper reports on an exploratory study of the role of programme leaders (PLs) in a pre-1992 university, based on interviews with PLs (7) and a survey of taught Masters students (54) in a single school. The study elicits PLs' activities, most of which might be categorised as managerial and administrative, with leadership required…

Thermal Mechanisms for High Amplitude Aerodynamic Flow Control (YIP 2012)

DTIC Science & Technology

2016-04-15

memorandum, master’s thesis, progress, quarterly, research , special, group study, etc. 3. DATES COVERED. Indicate the time during which the work...boundary layer ahead of the plasma. Since the ns-DBD flow control mechanism is primarily thermal, or least symmetric if associated with a quasi ...conditions with minimal experimental effort. The validity of probing a single location on the low speed side of the mixing layer to test for control

Catalysis by Single Atoms: Water Gas Shift and Ethylene Hydrogenation

DTIC Science & Technology

2009-04-20

addition to other microscopic phenomena at region of coefficients . Silicon carbide has a higher loss tangent at 2.4 GHz than most ceramics, and thus...Si 50 35 30 20 Ni 50 — — D. Sample holder and preparation: * The remainder is ZrB2. Graphite sheet ( McMaster -Carr, USA) is cut into different...results. 19 B. Microwave hybrid processing i. Microwave heating: 1. Volumetric Microwave absorption is proportional to the loss

The effect of multicolored machinable ceramics on the esthetics of all-ceramic crowns.

PubMed

Reich, Sven; Hornberger, Helga

2002-07-01

Computer-aided design/computer-assisted machining systems offer the possibility of fabricating restorations from one machinable ceramic block. Whether multishaded blocks improve esthetic results and are a viable alternative to individually stained ceramics has not been fully determined. The aim of this investigation was to examine the effect of multishaded blocks on the esthetic appearance of all-ceramic CEREC crowns and compare these crowns with single-shade and stained restorations. Ten subjects were included in this study. For each subject, 6 different crowns were milled with the use of a CEREC machine. One crown was milled from each of the following machinable ceramic materials: CEREC Vitablocs Mark II in classic colors; Vitablocs Mark II in 3D-Master colors; Vitablocs Mark II in either classic or 3D-Master colors, with additional staining; Megadenta Bloxx multishaded; Mark II experimental multilayer; and an experimental multilayer leucite ceramic. Three independent examiners assessed the esthetic appearance of crowns fabricated to match each subject's anterior tooth shade. A scale of 1 to 6 was used to score the shade match and esthetic adaptation of each crown, with 1 representing excellent characteristics and 3.5 serving as the threshold for clinical acceptability. The examiners' scores were averaged, and the mean values were analyzed with the Wilcoxon signed rank test (P

The retail display life of steaks prepared from chill stored vacuum and carbon dioxide-packed sub-primal beef cuts.

PubMed

Bell, R G; Penney, N; Moorhead, S M

1996-01-01

Chilled striploins and cube rolls from ten Australian steers (grain-fed for 150 days) were trimmed of external fat and cut transversely into portions approximately 10 cm thick, each weighing between 750 and 1000 g. These 'retailer-ready' cuts were each wrapped in drip saver pads and slid inside a plastic sleeve before being individually placed into a clear plastic high oxygen barrier film, metallized film or conventional vacuum bag. Cuts in clear plastic and metallized film packs were packaged in an oxygen-free saturated carbon dioxide atmosphere (CO(2)-CAP), those in vacuum bags were conventionally vacuum-packed. All packs were returned to the chiller for further cooling. After 24 hr, half the clear plastic and metallized CO(2)-CAP packs were carbon dioxide master-packed in groups of eight. Retailer-ready cuts in both clear plastic and metallized film single unit and master-packed CO(2)-CAP packs were air freighted to New Zealand and sea freighted to Japan for assessment. The control vacuum packs were all consigned to New Zealand. Assessments in both countries after 39-89 days storage at between 0 °C and -1.0 °C indicated that fat colour stability limited the retail display life of steaks cut from meat in these retailer-ready packs to approximately 48 hr. In this regard, meat from single unit CO(2)-CAP, master pack CO(2)-CAP and vacuum packs performed similarly. Lean meat colour and sensory attributes remained acceptable for up to 48 hr after displayed product was rejected because of grey-green fat discoloration. The microbiological status of retailer-ready cuts removed from CO(2)-CAP packs after 89 days chilled storage was superior to that of cuts from vacuum packs. Clear plastic and metallized film CO(2)-CAP packs performed comparably.

Engineering of global regulators and cell surface properties toward enhancing stress tolerance in Saccharomyces cerevisiae.

PubMed

Kuroda, Kouichi; Ueda, Mitsuyoshi

2017-12-01

Microbial cell factories are subject to various stresses, leading to the reductions of metabolic activity and bioproduction efficiency. Therefore, the development of stress-tolerant microorganisms is important for improving bio-production efficiency. Recently, modifications of cell surface properties and master regulators have been shown to be effective approaches for enhancing stress tolerance. The cell surface is an attractive target owing to its interactions with the environment and its role in transmitting environmental information. Cell surface engineering in yeast has enabled the convenient modification of cell surface properties. Displaying random peptide libraries and subsequent screening can successfully improve stress tolerance. Furthermore, master regulators including transcription factors are also promising target to be engineered because stress tolerance is determined by many cooperative factors and modification of master regulators can simultaneously affect the expression of multiple downstream genes. The key single amino acid mutations in transcription factors have been identified by analyzing tolerant yeasts that were isolated by adaptive evolution under stress conditions. This enabled the reconstruction of stress-tolerant yeast without burdening cells by introducing the identified mutations. Therefore, for the construction of stress-tolerant yeast from any strains, these two approaches are promising alternatives to conventional overexpression and deletion of stress-related genes. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

One parameter family of master equations for logistic growth and BCM theory

NASA Astrophysics Data System (ADS)

De Oliveira, L. R.; Castellani, C.; Turchetti, G.

2015-02-01

We propose a one parameter family of master equations, for the evolution of a population, having the logistic equation as mean field limit. The parameter α determines the relative weight of linear versus nonlinear terms in the population number n ⩽ N entering the loss term. By varying α from 0 to 1 the equilibrium distribution changes from maximum growth to almost extinction. The former is a Gaussian centered at n = N, the latter is a power law peaked at n = 1. A bimodal distribution is observed in the transition region. When N grows and tends to ∞, keeping the value of α fixed, the distribution tends to a Gaussian centered at n = N whose limit is a delta function corresponding to the stable equilibrium of the mean field equation. The choice of the master equation in this family depends on the equilibrium distribution for finite values of N. The presence of an absorbing state for n = 0 does not change this picture since the extinction mean time grows exponentially fast with N. As a consequence for α close to zero extinction is not observed, whereas when α approaches 1 the relaxation to a power law is observed before extinction occurs. We extend this approach to a well known model of synaptic plasticity, the so called BCM theory in the case of a single neuron with one or two synapses.

1.5  kW ytterbium-doped single-transverse-mode, linearly polarized monolithic fiber master oscillator power amplifier.

PubMed

Huang, Long; Ma, Pengfei; Tao, Rumao; Shi, Chen; Wang, Xiaolin; Zhou, Pu

2015-04-01

A linearly polarized monolithic fiber laser based on a master oscillator power amplifier structure with a master oscillator and a one-stage power amplifier is reported. We design a homemade oscillator based on the theory that, in the coiled gain fiber, the higher modes and the polarized mode of the fundamental mode along the fast axis are suppressed effectively because of their obviously higher bend loss than that of the polarized mode of the fundamental mode along the slow axis. The oscillator operates at 1080 nm, launching a 30 W seed laser with a high polarization extinction ratio of 19 dB into the power amplifier via a mode field adapter. The power amplifier utilizes Yb-doped polarization-maintaining fiber of 20/400  μm, which produces nearly diffraction-limited output power of about 1.5 kW with an optical-optical efficiency of 81.5% and a polarization extinction ratio of 13.8 dB. Both the M(x)² factor and the M(y)² factor of the collimated beam are measured to be about 1.2. The spectral width of the output power is broadened approximately linearly, and the full width at half maximum of the spectrum at the maximum output power is about 5.8 nm. It is known as the highest linearly polarized output power to the best of our knowledge.

Computational Evaluation of the Strict Master and Random Template Models of Endogenous Retrovirus Evolution

PubMed Central

Nascimento, Fabrícia F.; Rodrigo, Allen G.

2016-01-01

Transposable elements (TEs) are DNA sequences that are able to replicate and move within and between host genomes. Their mechanism of replication is also shared with endogenous retroviruses (ERVs), which are also a type of TE that represent an ancient retroviral infection within animal genomes. Two models have been proposed to explain TE proliferation in host genomes: the strict master model (SMM), and the random template (or transposon) model (TM). In SMM only a single copy of a given TE lineage is able to replicate, and all other genomic copies of TEs are derived from that master copy. In TM, any element of a given family is able to replicate in the host genome. In this paper, we simulated ERV phylogenetic trees under variations of SMM and TM. To test whether current phylogenetic programs can recover the simulated ERV phylogenies, DNA sequence alignments were simulated and maximum likelihood trees were reconstructed and compared to the simulated phylogenies. Results indicate that visual inspection of phylogenetic trees alone can be misleading. However, if a set of statistical summaries is calculated, we are able to distinguish between models with high accuracy by using a data mining algorithm that we introduce here. We also demonstrate the use of our data mining algorithm with empirical data for the porcine endogenous retrovirus (PERV), an ERV that is able to replicate in human and pig cells in vitro. PMID:27649303

Contribution of plants and traditional medicines to the disparities and similarities in acute poisoning incidents in Botswana, South Africa and Uganda.

PubMed

Malangu, N

2014-01-01

Acute poisoning incidents are one of the leading causes of morbidity and hospitalization in several countries. The purpose of this analysis was to compare the patterns of acute poisoning in three countries namely, Botswana, South Africa and Uganda; and examine the similarities and disparities in the patterns of occurrence of acute poisoning based on the sociodemographic factors of the victims, the toxic agents involved, the circumstances surrounding the incidents and their outcomes. This paper is based on the re-analysis of data that were collected from January to June 2005 by some Master of Public Health students using a similar data collection tool. A single dataset made of the original individual datasheets was constituted and analysed. Overall, it was found that the mean age of victims of acute poisoning was 20.9 ± 14.5 years; the youngest victim was a 3 months old boy from South Africa; and the oldest was a 75 years old man from Uganda. In descending order, the most common toxic agents involved in poisoning incidents were household products (46.1%), agrochemicals (18.8%), pharmaceuticals (14.0%), animal and insect bites (13.0%), food poisoning (4.5%), as well as plants and traditional medicines (3.6%). Across the three countries, acute poisoning occurred mainly by accident, but the contextual factors of each country led to a pattern of acute poisoning that showed some similarities with regard to the distribution of deliberate self-poisoning among females, teenagers, and young adult victims. There were disparities related to the differential access to toxic agents, based on the age and gender of the victims. Of the 17 deaths reported, 2 (11.7%) were due to traditional medicines; household products were implicated in fatal outcomes in all three countries, though the extent of their involvement varied from country to country. Although plant and traditional medicines caused fewer cases of acute poisoning incidents, they contributed considerably to fatal outcomes.

eQTL networks unveil enriched mRNA master integrators downstream of complex disease-associated SNPs.

PubMed

Li, Haiquan; Pouladi, Nima; Achour, Ikbel; Gardeux, Vincent; Li, Jianrong; Li, Qike; Zhang, Hao Helen; Martinez, Fernando D; 'Skip' Garcia, Joe G N; Lussier, Yves A

2015-12-01

The causal and interplay mechanisms of Single Nucleotide Polymorphisms (SNPs) associated with complex diseases (complex disease SNPs) investigated in genome-wide association studies (GWAS) at the transcriptional level (mRNA) are poorly understood despite recent advancements such as discoveries reported in the Encyclopedia of DNA Elements (ENCODE) and Genotype-Tissue Expression (GTex). Protein interaction network analyses have successfully improved our understanding of both single gene diseases (Mendelian diseases) and complex diseases. Whether the mRNAs downstream of complex disease genes are central or peripheral in the genetic information flow relating DNA to mRNA remains unclear and may be disease-specific. Using expression Quantitative Trait Loci (eQTL) that provide DNA to mRNA associations and network centrality metrics, we hypothesize that we can unveil the systems properties of information flow between SNPs and the transcriptomes of complex diseases. We compare different conditions such as naïve SNP assignments and stringent linkage disequilibrium (LD) free assignments for transcripts to remove confounders from LD. Additionally, we compare the results from eQTL networks between lymphoblastoid cell lines and liver tissue. Empirical permutation resampling (p<0.001) and theoretic Mann-Whitney U test (p<10(-30)) statistics indicate that mRNAs corresponding to complex disease SNPs via eQTL associations are likely to be regulated by a larger number of SNPs than expected. We name this novel property mRNA hubness in eQTL networks, and further term mRNAs with high hubness as master integrators. mRNA master integrators receive and coordinate the perturbation signals from large numbers of polymorphisms and respond to the personal genetic architecture integratively. This genetic signal integration contrasts with the mechanism underlying some Mendelian diseases, where a genetic polymorphism affecting a single protein hub produces a divergent signal that affects a large number of downstream proteins. Indeed, we verify that this property is independent of the hubness in protein networks for which these mRNAs are transcribed. Our findings provide novel insights into the pleiotropy of mRNAs targeted by complex disease polymorphisms and the architecture of the information flow between the genetic polymorphisms and transcriptomes of complex diseases. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Non-equilibrium transport and spin dynamics in single-molecule magnets

NASA Astrophysics Data System (ADS)

Moldoveanu, V.; Dinu, I. V.; Tanatar, B.

2015-11-01

The time-dependent transport through single-molecule magnets (SMM) coupled to magnetic or non-magnetic electrodes is studied in the framework of the generalized Master equation (GME) method. We calculate the transient currents which develop when the molecule is smoothly coupled to the source and drain electrodes. The signature of the electrically induced magnetic switching on these transient currents is investigated. Our simulations show that the magnetic switching of the molecular spin can be read indirectly from the transient currents if one lead is magnetic and it is much faster if the leads have opposite spin polarizations. We identify effects of the transverse anisotropy on the dynamics of molecular states.

Single-nm resolution approach by applying DDRP and DDRM

NASA Astrophysics Data System (ADS)

Shibayama, Wataru; Shigaki, Shuhei; Takeda, Satoshi; Nakajima, Makoto; Sakamoto, Rikimaru

2017-03-01

EUV lithography has been desired as the leading technology for 1x or single nm half-pitch patterning. However, the source power, masks and resist materials still have critical issues for mass production. Especially in resist materials, RLS trade-off has been the key issue. To overcome this issue, we are suggesting Dry Development Rinse Process (DDRP) and Materials (DDRM) as the pattern collapse mitigation approach. This DDRM can perform not only as pattern collapse free materials for fine pitch, but also as the etching hard mask against bottom layer (spin on carbon : SOC). In this paper, we especially propose new approaches to achieve high resolution around hp1X nm L/S and single nm line patterning. Especially, semi iso 8nm line was successfully achieved with good LWR (2.5nm) and around 3 times aspect ratio. This single nm patterning technique also helped to enhance sensitivity about 33%. On the other hand, pillar patterning thorough CH pattern by applying DDRP also showed high resolution below 20nm pillar CD with good LCDU and high sensitivity. This new DDRP technology can be the promising approach not only for hp1Xnm level patterning but also single nm patterning in N7/N5 and beyond.

Nanohole and dot patterning processes on quartz substrate by R-θ electron beam lithography and nanoimprinting

NASA Astrophysics Data System (ADS)

Watanabe, Tsuyoshi; Taniguchi, Kazutake; Suzuki, Kouta; Iyama, Hiromasa; Kishimoto, Shuji; Sato, Takashi; Kobayashi, Hideo

2016-06-01

Fine hole and dot patterns with bit pitches (bp’s) of less than 40 nm were fabricated in the circular band area of a quartz substrate by R-θ electron beam lithography (EBL), reactive ion etching (RIE), and nanoimprinting. These patterning processes were studied to obtain minimum pitch sizes of hole and dot patterns without pattern collapse. The patterning on the circular band was aimed to apply these patterning processes to future high-density bit-patterned media (BPM) for hard disk drive (HDD) and permanent memory for the long life archiving of digital data. In hole patterning, a minimum-22-nm-bp and 8.2-nm-diameter pattern (1.3 Tbit/in.2) was obtained on a quartz substrate by optimizing the R-θ EBL and RIE processes. Dot patterns were replicated on another quartz substrate by nanoimprinting using a hole-patterned quartz substrate as a master mold followed by RIE. In dot patterning, a minimum-30-nm-bp and 18.5-nm-diameter pattern (0.7 Tbit/in.2) was obtained by introducing new descum conditions. It was observed that the minimum bp of successful patterning increased as the fabrication process proceeded, i.e., from 20 nm bp in the first EBL process to 30 nm bp in the last quartz dot patterning process. From the measured diameters of the patterns, it was revealed that pattern collapse was apt to occur when the value of average diameter plus 3 sigma of diameter was close to the bp. It was suggested that multiple fabrication processes caused the degradation of pattern quality; therefore, hole patterning is more suitable than dot patterning for future applications owing to the lower quality degradation by its simple fabrication process.

Stochastic win-stay-lose-shift strategy with dynamic aspirations in evolutionary social dilemmas

NASA Astrophysics Data System (ADS)

Amaral, Marco A.; Wardil, Lucas; Perc, Matjaž; da Silva, Jafferson K. L.

2016-09-01

In times of plenty expectations rise, just as in times of crisis they fall. This can be mathematically described as a win-stay-lose-shift strategy with dynamic aspiration levels, where individuals aspire to be as wealthy as their average neighbor. Here we investigate this model in the realm of evolutionary social dilemmas on the square lattice and scale-free networks. By using the master equation and Monte Carlo simulations, we find that cooperators coexist with defectors in the whole phase diagram, even at high temptations to defect. We study the microscopic mechanism that is responsible for the striking persistence of cooperative behavior and find that cooperation spreads through second-order neighbors, rather than by means of network reciprocity that dominates in imitation-based models. For the square lattice the master equation can be solved analytically in the large temperature limit of the Fermi function, while for other cases the resulting differential equations must be solved numerically. Either way, we find good qualitative agreement with the Monte Carlo simulation results. Our analysis also reveals that the evolutionary outcomes are to a large degree independent of the network topology, including the number of neighbors that are considered for payoff determination on lattices, which further corroborates the local character of the microscopic dynamics. Unlike large-scale spatial patterns that typically emerge due to network reciprocity, here local checkerboard-like patterns remain virtually unaffected by differences in the macroscopic properties of the interaction network.

Different T-bet expression patterns characterize particular reactive lymphoid tissue lesions.

PubMed

Jöhrens, K; Anagnostopoulos, I; Dürkop, H; Stein, H

2006-03-01

To investigate T-bet expression profiles in various lymphoid tissue diseases caused by intracellular pathogens and to compare them in disorders without an infective aetiology. Murine and in vitro experiments have shown that the expression/induction of T-bet, the master regulator of Th1 differentiation, can be achieved by obligate intracellular pathogens and high interferon (IFN)-gamma levels. Lymph node biopsies were analysed immunohistochemically employing single and double labelling for T-bet and CD20, CD4, CD8 and CD30 detection. In disorders associated with high IFN-gamma levels and intracellular pathogens (infectious mononucleosis, HIV-associated lymphadenopathy, cat-scratch disease, and toxoplasmic lymphadenitis), T-bet-expressing CD4 cells were accompanied by significant numbers of T-bet-positive CD8 and B cells. A similar profile was also found in histiocytic necrotizing (Kikuchi) lymphadenitis, a disease of unknown cause. In contrast, T-bet expression in disorders without an infective aetiology was observed in only a small portion of lymphocytes. Increased T-bet expression does not only identify intracellular infections in lymphoid tissue associated with high IFN-gamma levels, but also implies that, under these conditions, it becomes induced in B cells, which apparently support the Th1 response. T-bet expression in Kikuchi lymphadenitis underscores the hypothesis that it is caused by an intracellular microorganism.

Phylogenetic analysis reveals positive correlations between adaptations to diverse hosts in a group of pathogen-like herbivores.

PubMed

Peterson, Daniel A; Hardy, Nate B; Morse, Geoffrey E; Stocks, Ian C; Okusu, Akiko; Normark, Benjamin B

2015-10-01

A jack of all trades can be master of none-this intuitive idea underlies most theoretical models of host-use evolution in plant-feeding insects, yet empirical support for trade-offs in performance on distinct host plants is weak. Trade-offs may influence the long-term evolution of host use while being difficult to detect in extant populations, but host-use evolution may also be driven by adaptations for generalism. Here we used host-use data from insect collection records to parameterize a phylogenetic model of host-use evolution in armored scale insects, a large family of plant-feeding insects with a simple, pathogen-like life history. We found that a model incorporating positive correlations between evolutionary changes in host performance best fit the observed patterns of diaspidid presence and absence on nearly all focal host taxa, suggesting that adaptations to particular hosts also enhance performance on other hosts. In contrast to the widely invoked trade-off model, we advocate a "toolbox" model of host-use evolution in which armored scale insects accumulate a set of independent genetic tools, each of which is under selection for a single function but may be useful on multiple hosts. © 2015 The Author(s).

Influence of CAD/CAM scanning method and tooth-preparation design on the vertical misfit of zirconia crown copings.

PubMed

Castillo Oyagüe, Raquel; Sánchez-Jorge, María Isabel; Sánchez Turrión, Andrés

2010-12-01

To evaluate the influence of scanning method, finish line type and occlusal convergence angle of the teeth preparations on the vertical misfit of zirconia crown copings. 20 standardized stainless-steel master dies were machined simulating full-crown preparations. The total convergence angle was 15 degrees or 20 degrees (n=10 each). Two of the finish line types: a chamfer (CH) and a shoulder (SH) were prepared around the contour of each abutment. Over these dies, 20 structures were made by CAD/CAM (Cercon, Dentsply). An optical laser digitized the wax patterns of 10 single-unit copings (WS), and 10 abutments were direct-scanned to design the cores by computer (DS). Zirconia milled caps were luted onto the models under constant seating pressure. Vertical discrepancy was assessed by SEM. Misfit data were analyzed using ANOVA and Student-Newman-Keuls (SNK) test for multiple comparisons at alpha = 0.05. Vertical gap measurements of WS copings were significantly higher than those of DS frames (P < 0.0001). SH exhibited statistically higher discrepancies than CH when combined with a 15-degree occlusal convergence angle regardless of the scanning method (P < 0.05). The taper angle of the preparation (15 degrees vs. 20 degrees) had no effect on the marginal adaptation of chamfered samples.

Decentralized Algorithms for Optimization of Single Commodity Flows

DTIC Science & Technology

1980-06-01

Offiachstssiue of Navallog Researche o T1 LaoayfrInformation Sytm rgadDcso yt~ NCd SifyiEDN.04-8 Coe47II. CNRLIGOFCAEADADES1. ftoftT ADPIAIO100WORAI Arlington...requirements for the degree of Master of Science at the Massachusetts Institute of Technology, May 1980. The research was conducted at the M.I.T...this thesis topic. His interest and suggestions made the research rewarding. The research was carried out at the M.I.T. Laboratory for Information

Methods for Isolation, Purification, and Propagation of Bacteriophages of Campylobacter jejuni.

PubMed

Gencay, Yilmaz Emre; Birk, Tina; Sørensen, Martine Camilla Holst; Brøndsted, Lone

2017-01-01

Here, we describe the methods for isolation, purification, and propagation of Campylobacter jejuni bacteriophages from samples expected to contain high number of phages such as chicken feces. The overall steps are (1) liberation of phages from the sample material; (2) observation of plaque-forming units on C. jejuni lawns using a spot assay; (3) isolation of single plaques; (4) consecutive purification procedures; and (5) propagation of purified phages from a plate lysate to prepare master stocks.

A Computer Based Data Management System for Automating the Air Force Vehicle Master Plan

DTIC Science & Technology

1989-09-01

and columns -- but a much more sophisticated approach defining the relations among the data. Dr. Edgar F . Codd , who first proposed the relational...39 f . Vehicle Types Screen ... .......... 41 7. NSN Selection Screen ... .......... 41 8. NSN Retry Screen ..... ............ 9. F:ve-Year Outlook...had a single source o: inormation on the vehicle fleet, to be used in deve- uctn..: f .. ng and prioratizing the vehicle program- re~suireo to meet the

TIGER 2010 Boundaries

EPA Pesticide Factsheets

This EnviroAtlas web service supports research and online mapping activities related to EnviroAtlas (https://www.epa.gov/enviroatlas). This web service includes the State and County boundaries from the TIGER shapefiles compiled into a single national coverage for each layer. The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB).

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 8 2011-10-01 2011-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 8 2012-10-01 2012-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 8 2014-10-01 2014-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

46 CFR Sec. 3 - Master's requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 8 2013-10-01 2013-10-01 false Master's requirements. Sec. 3 Section 3 Shipping... Master's requirements. The Master shall: (a) Receive and receipt for the quantities of slop chest items... therefor, at the unit price, specified by the Slop Chest Statement furnished the Master by the General...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

48 CFR 217.7103-1 - Content and format of master agreements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... master agreements. 217.7103-1 Section 217.7103-1 Federal Acquisition Regulations System DEFENSE... CONTRACTING METHODS Master Agreement for Repair and Alteration of Vessels 217.7103-1 Content and format of master agreements. Follow the procedures at PGI 217.7103-1 for preparation of master agreements. [71 FR...

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

48 CFR 217.7103-6 - Modification of master agreements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Modification of master... Master Agreement for Repair and Alteration of Vessels 217.7103-6 Modification of master agreements. (a) Review each master agreement at least annually before the anniversary of its effective date and revise it...

78 FR 43251 - Grosvenor Alternative Funds Master Trust, et al.; Notice of Application

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-19

... Alternative Funds Master Trust, et al.; Notice of Application July 15, 2013. AGENCY: Securities and Exchange... Alternative Funds Master Trust (``Master Trust''), Grosvenor Alternative Funds (``GAF Trust''), and Grosvenor... calling (202) 551-8090. Applicants' Representations 1. The Master Trust \\1\\ and the GAF Trust...

H theorem for generalized entropic forms within a master-equation framework

NASA Astrophysics Data System (ADS)

Casas, Gabriela A.; Nobre, Fernando D.; Curado, Evaldo M. F.

2016-03-01

The H theorem is proven for generalized entropic forms, in the case of a discrete set of states. The associated probability distributions evolve in time according to a master equation, for which the corresponding transition rates depend on these entropic forms. An important equation describing the time evolution of the transition rates and probabilities in such a way as to drive the system towards an equilibrium state is found. In the particular case of Boltzmann-Gibbs entropy, it is shown that this equation is satisfied in the microcanonical ensemble only for symmetric probability transition rates, characterizing a single path to the equilibrium state. This equation fulfils the proof of the H theorem for generalized entropic forms, associated with systems characterized by complex dynamics, e.g., presenting nonsymmetric probability transition rates and more than one path towards the same equilibrium state. Some examples considering generalized entropies of the literature are discussed, showing that they should be applicable to a wide range of natural phenomena, mainly those within the realm of complex systems.

High Repetition Rate Pulsed 2-Micron Laser Transmitter for Coherent CO2 DIAL Measurement

NASA Technical Reports Server (NTRS)

Singh, Uprendra N.; Bai, Yingxin; Yu, Jirong; Petros, Mulugeta; Petzar, Paul J.; Trieu, Bo C.; Lee, Hyung

2009-01-01

A high repetition rate, highly efficient, Q-switched 2-micron laser system as the transmitter of a coherent differential absorption lidar for CO2 measurement has been developed at NASA Langley Research Center. Such a laser transmitter is a master-slave laser system. The master laser operates in a single frequency, either on-line or off-line of a selected CO2 absorption line. The slave laser is a Q-switched ring-cavity Ho:YLF laser which is pumped by a Tm:fiber laser. The repetition rate can be adjusted from a few hundred Hz to 10 kHz. The injection seeding success rate is from 99.4% to 99.95%. For 1 kHz operation, the output pulse energy is 5.5mJ with the pulse length of approximately 50 ns. The optical-to-optical efficiency is 39% when the pump power is 14.5W. The measured standard deviation of the laser frequency jitter is about 3 MHz.

Delay chemical master equation: direct and closed-form solutions

PubMed Central

Leier, Andre; Marquez-Lago, Tatiana T.

2015-01-01

The stochastic simulation algorithm (SSA) describes the time evolution of a discrete nonlinear Markov process. This stochastic process has a probability density function that is the solution of a differential equation, commonly known as the chemical master equation (CME) or forward-Kolmogorov equation. In the same way that the CME gives rise to the SSA, and trajectories of the latter are exact with respect to the former, trajectories obtained from a delay SSA are exact representations of the underlying delay CME (DCME). However, in contrast to the CME, no closed-form solutions have so far been derived for any kind of DCME. In this paper, we describe for the first time direct and closed solutions of the DCME for simple reaction schemes, such as a single-delayed unimolecular reaction as well as chemical reactions for transcription and translation with delayed mRNA maturation. We also discuss the conditions that have to be met such that such solutions can be derived. PMID:26345616

Delay chemical master equation: direct and closed-form solutions.

PubMed

Leier, Andre; Marquez-Lago, Tatiana T

2015-07-08

The stochastic simulation algorithm (SSA) describes the time evolution of a discrete nonlinear Markov process. This stochastic process has a probability density function that is the solution of a differential equation, commonly known as the chemical master equation (CME) or forward-Kolmogorov equation. In the same way that the CME gives rise to the SSA, and trajectories of the latter are exact with respect to the former, trajectories obtained from a delay SSA are exact representations of the underlying delay CME (DCME). However, in contrast to the CME, no closed-form solutions have so far been derived for any kind of DCME. In this paper, we describe for the first time direct and closed solutions of the DCME for simple reaction schemes, such as a single-delayed unimolecular reaction as well as chemical reactions for transcription and translation with delayed mRNA maturation. We also discuss the conditions that have to be met such that such solutions can be derived.

Rigid body formulation in a finite element context with contact interaction

NASA Astrophysics Data System (ADS)

Refachinho de Campos, Paulo R.; Gay Neto, Alfredo

2018-03-01

The present work proposes a formulation to employ rigid bodies together with flexible bodies in the context of a nonlinear finite element solver, with contact interactions. Inertial contributions due to distribution of mass of a rigid body are fully developed, considering a general pole position associated with a single node, representing a rigid body element. Additionally, a mechanical constraint is proposed to connect a rigid region composed by several nodes, which is useful for linking rigid/flexible bodies in a finite element environment. Rodrigues rotation parameters are used to describe finite rotations, by an updated Lagrangian description. In addition, the contact formulation entitled master-surface to master-surface is employed in conjunction with the rigid body element and flexible bodies, aiming to consider their interaction in a rigid-flexible multibody environment. New surface parameterizations are presented to establish contact pairs, permitting pointwise interaction in a frictional scenario. Numerical examples are provided to show robustness and applicability of the methods.

The 3.5-m all-SiC telescope for SPICA

NASA Astrophysics Data System (ADS)

Toulemont, Yves; Breysse, Jacques; Pierot, Dominique; Sein, Emmanuel; Nakagawa, Takao; Kaneda, Hidehiro; Onaka, Takashi; Hirabayashi, Masayuki; Narasaki, Katsuhiro; Sakuta, Hironobu; Miura, Shinji

2004-10-01

Placed on the L2 Lagrangian point, the Space Infrared Telescope for Cosmology and Astrophysics (SPICA) will operate in the 5 to 200 μm wavelength range, at 4.5K. The large aperture telescope (3.5m diameter in a single piece) requires a strong manufacturing mastering, associated with high technical performances. The background acquired by EADS-Astrium (France) on the 3.5m Silicone Carbide Herschel Telescope is a key for the success of the SPICA development. EADS-Astrium has been awarded by the Japan Aerospace Exploration Agency (JAXA) and Sumitomo Heavy Industries to assess the feasibility of the 3.5m all SiC telescope through a design phase contract. The Telescope driving requirements are the large diameter of 3.5m especially critical for the manufacturing aspects, and the Wave Front Error which has to be kept below 350nm rms over a large temperature range from ambient to the operational temperature of 4.5K which requires a strong mastering of the distortions.

Semi-classical statistical description of Fröhlich condensation.

PubMed

Preto, Jordane

2017-06-01

Fröhlich's model equations describing phonon condensation in open systems of biological relevance are reinvestigated within a semi-classical statistical framework. The main assumptions needed to deduce Fröhlich's rate equations are identified and it is shown how they lead us to write an appropriate form for the corresponding master equation. It is shown how solutions of the master equation can be numerically computed and can highlight typical features of the condensation effect. Our approach provides much more information compared to the existing ones as it allows to investigate the time evolution of the probability density function instead of following single averaged quantities. The current work is also motivated, on the one hand, by recent experimental evidences of long-lived excited modes in the protein structure of hen-egg white lysozyme, which were reported as a consequence of the condensation effect, and, on the other hand, by a growing interest in investigating long-range effects of electromagnetic origin and their influence on the dynamics of biochemical reactions.

A critical evaluation of theories for predicting microcracking in composite laminates

NASA Technical Reports Server (NTRS)

Nairn, John A.; Hu, Shoufeng; Bark, Jong S.

1993-01-01

We present experimental results on 21 different layups of Hercules AS4 carbon fiber/3501-6 epoxy laminates. All laminates had 90 deg plies; some had them in the middle, while some had them on a free surface. During tensile loading, the first form of damage in all laminates was microcracking of the 90 deg plies. For each laminate, we recorded both the crack density and the complete distribution of crack spacings as a function of the applied load. By rearranging various microcracking theories, we developed a master-curve approach that permitted plotting the results from all laminates on a single plot. By comparing master-curve plots for different theories, it was possible to critically evaluate the quality of those theories. We found that a critical-energy-release-rate criterion calculated using a 2D variational stress analysis gave the best results. All microcracking theories based on a strength-failure criteria gave poor results. All microcracking theories using 1D stress analyses, regardless of the failure criterion, also gave poor results.

Nonequilibrium Kondo effect in a magnetic field: auxiliary master equation approach

NASA Astrophysics Data System (ADS)

Fugger, Delia M.; Dorda, Antonius; Schwarz, Frauke; von Delft, Jan; Arrigoni, Enrico

2018-01-01

We study the single-impurity Anderson model out of equilibrium under the influence of a bias voltage ϕ and a magnetic field B. We investigate the interplay between the shift ({ω }B) of the Kondo peak in the spin-resolved density of states (DOS) and the one ({φ }B) of the conductance anomaly. In agreement with experiments and previous theoretical calculations we find that, while the latter displays a rather linear behavior with an almost constant slope as a function of B down to the Kondo scale, the DOS shift first features a slower increase reaching the same behavior as {φ }B only for | g| {μ }BB\\gg {k}B{T}K. Our auxiliary master equation approach yields highly accurate nonequilibrium results for the DOS and for the conductance all the way from within the Kondo up to the charge fluctuation regime, showing excellent agreement with a recently introduced scheme based on a combination of numerical renormalization group with time-dependent density matrix renormalization group.

An Autonomous Distributed Fault-Tolerant Local Positioning System

NASA Technical Reports Server (NTRS)

Malekpour, Mahyar R.

2017-01-01

We describe a fault-tolerant, GPS-independent (Global Positioning System) distributed autonomous positioning system for static/mobile objects and present solutions for providing highly-accurate geo-location data for the static/mobile objects in dynamic environments. The reliability and accuracy of a positioning system fundamentally depends on two factors; its timeliness in broadcasting signals and the knowledge of its geometry, i.e., locations and distances of the beacons. Existing distributed positioning systems either synchronize to a common external source like GPS or establish their own time synchrony using a scheme similar to a master-slave by designating a particular beacon as the master and other beacons synchronize to it, resulting in a single point of failure. Another drawback of existing positioning systems is their lack of addressing various fault manifestations, in particular, communication link failures, which, as in wireless networks, are increasingly dominating the process failures and are typically transient and mobile, in the sense that they typically affect different messages to/from different processes over time.

Sudden spreading of infections in an epidemic model with a finite seed fraction

NASA Astrophysics Data System (ADS)

Hasegawa, Takehisa; Nemoto, Koji

2018-03-01

We study a simple case of the susceptible-weakened-infected-removed model in regular random graphs in a situation where an epidemic starts from a finite fraction of initially infected nodes (seeds). Previous studies have shown that, assuming a single seed, this model exhibits a kind of discontinuous transition at a certain value of infection rate. Performing Monte Carlo simulations and evaluating approximate master equations, we find that the present model has two critical infection rates for the case with a finite seed fraction. At the first critical rate the system shows a percolation transition of clusters composed of removed nodes, and at the second critical rate, which is larger than the first one, a giant cluster suddenly grows and the order parameter jumps even though it has been already rising. Numerical evaluation of the master equations shows that such sudden epidemic spreading does occur if the degree of the underlying network is large and the seed fraction is small.

The master degree: A critical transition in STEM doctoral education

NASA Astrophysics Data System (ADS)

Lange, Sheila Edwards

The need to broaden participation in the nation's science, technology, engineering, and mathematics (STEM) undergraduate and graduate programs is currently a matter of national urgency. The small number of women and underrepresented minorities (URM) earning doctoral degrees in STEM is particularly troubling given significant increases in the number of students earning master's degrees since 1990. In the decade between 1990 and 2000, the total number of master's recipients increased by 42%. During this same time period, the number of women earning master's degrees increased by 56%, African Americans increased by 132%, American Indians by 101%, Hispanics by 146%, and Asian Americans by 117% (Syverson, 2003). Growth in underrepresented group education at the master's level raises questions about the relationship between master's and doctoral education. Secondary data analysis of the Survey of Earned Doctorates (SED) was used to examine institutional pathways to the doctorate in STEM disciplines and transitions from master's to doctoral programs by race and gender. While the study revealed no significant gender differences in pathways, compared to White and Asian American students, URM students take significantly different pathways to the doctorate. URM students are significantly more likely to earn the bachelor's, master's, and doctoral degrees at three different institutions. Their path is significantly more likely to include earning a master's degree en route to the doctorate. Further, URM students are more likely to experience transition between the master's and doctoral degrees, and the transitions are not limited to those who earn master's degrees at master's-only institutions. These findings suggest that earning a master's degree is more often a stepping stone to the doctorate for URM students. Master's degree programs, therefore, have the potential to be a valuable resource for policymakers and graduate programs seeking to increase the diversity of URM students earning doctorates in STEM.

Dual arm master controller for a bilateral servo-manipulator

DOEpatents

Kuban, Daniel P.; Perkins, Gerald S.

1989-01-01

A master controller for a mechanically dissimilar bilateral slave servo-manipulator is disclosed. The master controller includes a plurality of drive trains comprising a plurality of sheave arrangements and cables for controlling upper and lower degrees of master movement. The cables and sheaves of the master controller are arranged to effect kinematic duplication of the slave servo-manipulator, despite mechanical differences therebetween. A method for kinematically matching a master controller to a slave servo-manipulator is also disclosed.

A polymeric master replication technology for mass fabrication of poly(dimethylsiloxane) microfluidic devices.

PubMed

Li, Hai-Fang; Lin, Jin-Ming; Su, Rong-Guo; Cai, Zong Wei; Uchiyama, Katsumi

2005-05-01

A protocol of producing multiple polymeric masters from an original glass master mold has been developed, which enables the production of multiple poly(dimethylsiloxane) (PDMS)-based microfluidic devices in a low-cost and efficient manner. Standard wet-etching techniques were used to fabricate an original glass master with negative features, from which more than 50 polymethylmethacrylate (PMMA) positive replica masters were rapidly created using the thermal printing technique. The time to replicate each PMMA master was as short as 20 min. The PMMA replica masters have excellent structural features and could be used to cast PDMS devices for many times. An integration geometry designed for laser-induced fluorescence (LIF) detection, which contains normal deep microfluidic channels and a much deeper optical fiber channel, was successfully transferred into PDMS devices. The positive relief on seven PMMA replica masters is replicated with regard to the negative original glass master, with a depth average variation of 0.89% for 26-microm deep microfluidic channels and 1.16% for the 90 mum deep fiber channel. The imprinted positive relief in PMMA from master-to-master is reproducible with relative standard deviations (RSDs) of 1.06% for the maximum width and 0.46% for depth in terms of the separation channel. The PDMS devices fabricated from the PMMA replica masters were characterized and applied to the separation of a fluorescein isothiocyanate (FITC)-labeled epinephrine sample.

The Master Artisan: A Framework for Master Tradespeople in Australia. Occasional Paper

ERIC Educational Resources Information Center

O'Reilly-Briggs, Karen

2011-01-01

The author explores the prospect of improving pathways and opportunities for tradespeople in Australia through the introduction of a masters-level qualification. The study investigates the views and opinions of senior industry representatives and professional educators to determine whether the introduction of a master trade or master artisan…

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

20 CFR 632.22 - Modification of a Comprehensive Annual Plan (CAP) and/or Master Plan.

Code of Federal Regulations, 2012 CFR

2012-04-01

... (CAP) and/or Master Plan. 632.22 Section 632.22 Employees' Benefits EMPLOYMENT AND TRAINING... Master Plan. (a) The requirements for modifying a Master Plan and/or CAP will be included in administrative instructions issued by the Grant Officer upon final implementation of the Master Plan/CAP system...

21 CFR 111.210 - What must the master manufacturing record include?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 2 2011-04-01 2011-04-01 false What must the master manufacturing record include...: Requirements for the Master Manufacturing Record § 111.210 What must the master manufacturing record include? The master manufacturing record must include: (a) The name of the dietary supplement to be...

21 CFR 111.210 - What must the master manufacturing record include?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 2 2012-04-01 2012-04-01 false What must the master manufacturing record include...: Requirements for the Master Manufacturing Record § 111.210 What must the master manufacturing record include? The master manufacturing record must include: (a) The name of the dietary supplement to be...

21 CFR 111.210 - What must the master manufacturing record include?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 2 2014-04-01 2014-04-01 false What must the master manufacturing record include...: Requirements for the Master Manufacturing Record § 111.210 What must the master manufacturing record include? The master manufacturing record must include: (a) The name of the dietary supplement to be...

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

16 CFR 1011.4 - Forms of advance public notice of meetings; Public Calendar/Master Calendar and Federal Register.

Code of Federal Regulations, 2012 CFR

2012-01-01

...; Public Calendar/Master Calendar and Federal Register. 1011.4 Section 1011.4 Commercial Practices CONSUMER... meetings; Public Calendar/Master Calendar and Federal Register. Advance notice of Agency activities is... Calendar/Master Calendar. (1) The printed Public Calendar and the Master Calendar maintained in the Office...

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

16 CFR 1011.4 - Forms of advance public notice of meetings; Public Calendar/Master Calendar and Federal Register.

Code of Federal Regulations, 2014 CFR

2014-01-01

...; Public Calendar/Master Calendar and Federal Register. 1011.4 Section 1011.4 Commercial Practices CONSUMER... meetings; Public Calendar/Master Calendar and Federal Register. Advance notice of Agency activities is... Calendar/Master Calendar. (1) The printed Public Calendar and the Master Calendar maintained in the Office...

21 CFR 111.210 - What must the master manufacturing record include?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 2 2013-04-01 2013-04-01 false What must the master manufacturing record include...: Requirements for the Master Manufacturing Record § 111.210 What must the master manufacturing record include? The master manufacturing record must include: (a) The name of the dietary supplement to be...

Advising Master's Students Pursuing Doctoral Study: A Survey of Counselor Educators and Supervisors

ERIC Educational Resources Information Center

Sackett, Corrine R.; Hartig, Nadine; Bodenhorn, Nancy; Farmer, Laura B.; Ghoston, Michelle R.; Graham, Jasmine; Lile, Jesse

2015-01-01

This study explored what faculty members are recommending to counselor education master's students regarding post-master's experience when considering doctoral studies and what the current faculty hiring preferences are in reference to the amount of post-master's experience needed. Advisors in counselor education master's programs encounter these…

20 CFR 632.22 - Modification of a Comprehensive Annual Plan (CAP) and/or Master Plan.

Code of Federal Regulations, 2011 CFR

2011-04-01

... (CAP) and/or Master Plan. 632.22 Section 632.22 Employees' Benefits EMPLOYMENT AND TRAINING... Master Plan. (a) The requirements for modifying a Master Plan and/or CAP will be included in administrative instructions issued by the Grant Officer upon final implementation of the Master Plan/CAP system...

Science Professionals: Master's Education for a Competitive World

ERIC Educational Resources Information Center

National Academies Press, 2008

2008-01-01

What are employer needs for staff trained in the natural sciences at the master's degree level? How do master's level professionals in the natural sciences contribute in the workplace? How do master's programs meet or support educational and career goals? "Science Professionals: Master's Education for a Competitive World" examines the answers to…

Experiential Learning: Lessons Learned from the UND Business and Government Symposium

ERIC Educational Resources Information Center

Harsell, Dana Michael; O'Neill, Patrick B.

2010-01-01

The authors describe lessons learned from a limited-duration experiential learning component of a Master's level course. The course is open to Master's in Business and Master's in Public Administration students and explores the relationships between government and business. A complete discussion of the Master's in Business and Master's in Public…

19 CFR 10.90 - Master records and metal matrices.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Master records and metal matrices. 10.90 Section... Master Records, and Metal Matrices § 10.90 Master records and metal matrices. (a) Consumption entries... made, of each master record or metal matrix covered thereby. (c) A bond on Customs Form 301, containing...

Tissue Doppler Imaging can be useful to distinguish pathological from physiological left ventricular hypertrophy: a study in master athletes and mild hypertensive subjects

PubMed Central

Galanti, Giorgio; Toncelli, Loira; Del Furia, Francesca; Stefani, Laura; Cappelli, Brunello; De Luca, Alessio; Vono, Maria Concetta Roberta

2009-01-01

Background Transthoracic echocardiography left ventricular wall thickness is often increased in master athletes and it results by intense physical training. Left Ventricular Hypertrophy can also be due to a constant pressure overload. Conventional Pulsed Wave (PW) Doppler analysis of diastolic function sometimes fails to distinguish physiological from pathological LVH. The aim of this study is to evaluate the role of Pulsed Wave Tissue Doppler Imaging in differentiating pathological from physiological LVH in the middle-aged population. Methods we selected a group of 80 master athletes, a group of 80 sedentary subjects with essential hypertension and an apparent normal diastolic function at standard PW Doppler analysis. The two groups were comparable for increased left ventricular wall thickness and mass index (134.4 ± 19.7 vs 134.5 ± 22.1 gr/m2; p > .05). Diastolic function indexes using the PW technique were in the normal range for both. Results Pulsed Wave TDI study of diastolic function immediately distinguished the two groups. While in master athletes the diastolic TDI-derived parameters remained within normal range (E' 9.4 ± 3.1 cm/sec; E/E' 7.8 ± 2.1), in the hypertensive group these parameters were found to be constantly altered, with mean values and variation ranges always outside normal validated limits (E' 7.2 ± 2.4 cm/sec; E/E' 10.6 ± 3.2), and with E' and E/E' statistically different in the two groups (p < .001). Conclusion Our study showed that the TDI technique can be an easy and validated method to assess diastolic function in differentiating normal from pseudonormal diastolic patterns and it can distinguish physiological from pathological LVH emphasizing the eligibility certification required by legal medical legislation as in Italy. PMID:19845938

What does the fruitless gene tell us about nature vs. nurture in the sex life of Drosophila?

PubMed

Yamamoto, Daisuke; Kohatsu, Soh

2017-04-03

The fruitless (fru) gene in Drosophila has been proposed to play a master regulator role in the formation of neural circuitries for male courtship behavior, which is typically considered to be an innate behavior composed of a fixed action pattern as generated by the central pattern generator. However, recent studies have shed light on experience-dependent changes and sensory-input-guided plasticity in courtship behavior. For example, enhanced male-male courtship, a fru mutant "hallmark," disappears when fru-mutant males are raised in isolation. The fact that neural fru expression is induced by neural activities in the adult invites the supposition that Fru as a chromatin regulator mediates experience-dependent epigenetic modification, which underlies the neural and behavioral plasticity.

Children's difficulty with true belief tasks: Competence deficit or performance problem?

PubMed

Oktay-Gür, Nese; Rakoczy, Hannes

2017-09-01

According to the standard picture of explicit theory of mind (ToM) development, children begin to (explicitly) ascribe beliefs to others and themselves from around age 4. The empirical basis of this picture comes from numerous studies consistently showing that children master verbal false belief (FB) tasks from around age 4 while children much younger have no difficulty in mastering structurally analogous true belief (TB) tasks. The standard picture, though, has come under serious attack from recent studies using TB tasks with wider age ranges. These studies have found that, paradoxically, children begin to fail TB tasks once they master FB tasks. Such findings cast doubt on the standard picture and suggest, instead, that FB tasks may be solved by much simpler strategies than proper belief reasoning. In the present study, we tested for the development of FB and TB performance in comprehensive and systematic ways. In particular, we tested the competing predictions of competence accounts (according to which TB failure reflects lack of conceptual competence) versus performance limitation accounts (according to which the standard picture is true yet children from around age 4 fail TB tasks due to performance factors). Studies 1 and 2 showed that performance in a variety of novel TB tasks showed a clear U-shaped curve, with children until age 3 and from age 10 performing competently and children in between failing, with strong negative correlations between TB and FB. Crucially, these patterns were found for various kinds of TB tasks, including those for which existing competence limitation accounts would not even predict any difficulty. Study 3, therefore, directly tested performance limitation accounts in terms of pragmatic and related factors and found that these patterns (failure in TB and negative TB-FB correlations) disappear once the relevant performance factors have been removed from the TB tasks. Taken together, these findings suggest that previous TB findings constitute false negatives, clearly speak for performance limitation accounts and thus corroborate the standard picture of the development of explicit theory of mind. Copyright © 2017 Elsevier B.V. All rights reserved.

Intensive virtual reality-based training for upper limb motor function in chronic stroke: a feasibility study using a single case experimental design and fMRI.

PubMed

Schuster-Amft, Corina; Henneke, Andrea; Hartog-Keisker, Birgit; Holper, Lisa; Siekierka, Ewa; Chevrier, Edith; Pyk, Pawel; Kollias, Spyros; Kiper, Daniel; Eng, Kynan

2015-01-01

To evaluate feasibility and neurophysiological changes after virtual reality (VR)-based training of upper limb (UL) movements. Single-case A-B-A-design with two male stroke patients (P1:67 y and 50 y, 3.5 and 3 y after onset) with UL motor impairments, 45-min therapy sessions 5×/week over 4 weeks. Patients facing screen, used bimanual data gloves to control virtual arms. Three applications trained bimanual reaching, grasping, hand opening. Assessments during 2-week baseline, weekly during intervention, at 3-month follow-up (FU): Goal Attainment Scale (GAS), Chedoke Arm and Hand Activity Inventory (CAHAI), Chedoke-McMaster Stroke Assessment (CMSA), Extended Barthel Index (EBI), Motor Activity Log (MAL). Functional magnetic resonance imaging scans (FMRI) before, immediately after treatment and at FU. P1 executed 5478 grasps (paretic arm). Improvements in CAHAI (+4) were maintained at FU. GAS changed to +1 post-test and +2 at FU. P2 executed 9835 grasps (paretic arm). CAHAI improvements (+13) were maintained at FU. GAS scores changed to -1 post-test and +1 at FU. MAL scores changed from 3.7 at pre-test to 5.5 post-test and 3.3 at FU. The VR-based intervention was feasible, safe, and intense. Adjustable application settings maintained training challenge and patient motivation. ADL-relevant UL functional improvements persisted at FU and were related to changed cortical activation patterns. Implications for Rehabilitation YouGrabber trains uni- and bimanual upper motor function. Its application is feasible, safe, and intense. The control of the virtual arms can be done in three main ways: (a) normal (b) virtual mirror therapy, or (c) virtual following. The mirroring feature provides an illusion of affected limb movements during the period when the affected upper limb (UL) is resting. The YouGrabber training led to ADL-relevant UL functional improvements that were still assessable 12 weeks after intervention finalization and were related to changed cortical activation patterns.

Pacific Fleet Regional Inventory Stocking Model (PRISM)

DTIC Science & Technology

2003-06-01

Fleet Inventory Management Form ..........................................................................99 19. Master Parts List Input Form...100 20. Master Parts List Update Form...107 26. Master Parts List by APL Report..............................................................................109 27. Master

Stochastic thermodynamics, fluctuation theorems and molecular machines.

PubMed

Seifert, Udo

2012-12-01

Stochastic thermodynamics as reviewed here systematically provides a framework for extending the notions of classical thermodynamics such as work, heat and entropy production to the level of individual trajectories of well-defined non-equilibrium ensembles. It applies whenever a non-equilibrium process is still coupled to one (or several) heat bath(s) of constant temperature. Paradigmatic systems are single colloidal particles in time-dependent laser traps, polymers in external flow, enzymes and molecular motors in single molecule assays, small biochemical networks and thermoelectric devices involving single electron transport. For such systems, a first-law like energy balance can be identified along fluctuating trajectories. For a basic Markovian dynamics implemented either on the continuum level with Langevin equations or on a discrete set of states as a master equation, thermodynamic consistency imposes a local-detailed balance constraint on noise and rates, respectively. Various integral and detailed fluctuation theorems, which are derived here in a unifying approach from one master theorem, constrain the probability distributions for work, heat and entropy production depending on the nature of the system and the choice of non-equilibrium conditions. For non-equilibrium steady states, particularly strong results hold like a generalized fluctuation-dissipation theorem involving entropy production. Ramifications and applications of these concepts include optimal driving between specified states in finite time, the role of measurement-based feedback processes and the relation between dissipation and irreversibility. Efficiency and, in particular, efficiency at maximum power can be discussed systematically beyond the linear response regime for two classes of molecular machines, isothermal ones such as molecular motors, and heat engines such as thermoelectric devices, using a common framework based on a cycle decomposition of entropy production.

In silico analysis of single-cell RNA sequencing data from 3 and 7 days old mouse spermatogonial stem cells to identify their differentially expressed genes and transcriptional regulators.

PubMed

Sisakhtnezhad, Sajjad

2018-05-11

Spermatogonial stem cells (SSCs), which are at the basis of spermatogenesis process, are valuable cells with different applications in biotechnology and regenerative medicine. Understanding the molecular basis of SSC self-renewal and differentiation at various developmental stages of the male organism is crucial to find key factors in the SSCs fate and function. Therefore, this study was aimed to use single-cell RNA-sequencing dataset analysis for identification of differentially expressed genes (DEGs) and their regulators in 3 and 7 days old mouse-derived single SSCs (mSSCs). Results showed 68 upregulated and 203 downregulated genes in 7 days old mouse-derived SSCs compared to 3 days old mSSCs, which were associated with 1493 and 3077 biological processes, respectively. It also found that DAZL, FKBP6, PAIP2, DDX4, H3F3B, TEX15, XRN2, MAEL, and SOD1 are important factors with the higher gene expression pattern, which may be pivotal for mSSCs fate and function during development of germ cells. Moreover, NR3C1, RXRA, NCOA, ESR1, PML, ATF2, BMI1, POU5F1, and CHD1 were the main central regulators for the upregulated DEGs, while HNF1A, C/EBPα, and NFATC1 were the master regulators for the downregulated DEGs. In this regard, two significant protein complexes were found in the protein-protein interactions network for the upregulated DEGs regulators. Furthermore, 24 protein kinases detected upstream of the main central regulators of DEGs. In conclusion, this study presents DEGs and their transcriptional regulators that are crucial for inducing and regulating SSCs commitment during development, and for developing efficient protocols to identify and isolate SSCs for different applications. © 2018 Wiley Periodicals, Inc.

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 1 2012-10-01 2011-10-01 true Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

46 CFR 11.463 - General requirements for endorsements as master, mate (pilot), and apprentice mate (steersman) of...

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false General requirements for endorsements as master, mate... Professional Requirements for Deck Officers § 11.463 General requirements for endorsements as master, mate... endorsements: (1) Master of towing vessels. (2) Master of towing vessels, limited. (3) Mate (pilot) of towing...

21 CFR 111.205 - What is the requirement to establish a master manufacturing record?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What is the requirement to establish a master... System: Requirements for the Master Manufacturing Record § 111.205 What is the requirement to establish a master manufacturing record? (a) You must prepare and follow a written master manufacturing record for...

46 CFR 11.463 - General requirements for endorsements as master, mate (pilot), and apprentice mate (steersman) of...

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false General requirements for endorsements as master, mate... Professional Requirements for Deck Officers § 11.463 General requirements for endorsements as master, mate... endorsements: (1) Master of towing vessels. (2) Master of towing vessels, limited. (3) Mate (pilot) of towing...

21 CFR 111.205 - What is the requirement to establish a master manufacturing record?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 2 2014-04-01 2014-04-01 false What is the requirement to establish a master... System: Requirements for the Master Manufacturing Record § 111.205 What is the requirement to establish a master manufacturing record? (a) You must prepare and follow a written master manufacturing record for...

46 CFR 11.463 - General requirements for endorsements as master, mate (pilot), and apprentice mate (steersman) of...

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false General requirements for endorsements as master, mate... Professional Requirements for Deck Officers § 11.463 General requirements for endorsements as master, mate... endorsements: (1) Master of towing vessels. (2) Master of towing vessels, limited. (3) Mate (pilot) of towing...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

43 CFR 2804.18 - What provisions do Master Agreements contain and what are their limitations?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false What provisions do Master Agreements....18 What provisions do Master Agreements contain and what are their limitations? (a) A Master...) BLM will not enter into any Agreement that is not in the public interest. (c) If you sign a Master...

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

43 CFR 2804.18 - What provisions do Master Agreements contain and what are their limitations?

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false What provisions do Master Agreements....18 What provisions do Master Agreements contain and what are their limitations? (a) A Master...) BLM will not enter into any Agreement that is not in the public interest. (c) If you sign a Master...

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

21 CFR 314.420 - Drug master files.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 5 2014-04-01 2014-04-01 false Drug master files. 314.420 Section 314.420 Food... master files. (a) A drug master file is a submission of information to the Food and Drug Administration by a person (the drug master file holder) who intends it to be used for one of the following purposes...

46 CFR 42.15-1 - Information to be supplied to the master.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false Information to be supplied to the master. 42.15-1... master. (a) The master of every new vessel shall be supplied with sufficient information in a form... authority. (b) The master of every new vessel, which is not already provided with stability information...

43 CFR 2804.18 - What provisions do Master Agreements contain and what are their limitations?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false What provisions do Master Agreements....18 What provisions do Master Agreements contain and what are their limitations? (a) A Master...) BLM will not enter into any Agreement that is not in the public interest. (c) If you sign a Master...

16 CFR § 1011.4 - Forms of advance public notice of meetings; Public Calendar/Master Calendar and Federal Register.

Code of Federal Regulations, 2013 CFR

2013-01-01

...; Public Calendar/Master Calendar and Federal Register. § 1011.4 Section § 1011.4 Commercial Practices... notice of meetings; Public Calendar/Master Calendar and Federal Register. Advance notice of Agency...) Public Calendar/Master Calendar. (1) The printed Public Calendar and the Master Calendar maintained in...

43 CFR 2804.18 - What provisions do Master Agreements contain and what are their limitations?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false What provisions do Master Agreements....18 What provisions do Master Agreements contain and what are their limitations? (a) A Master...) BLM will not enter into any Agreement that is not in the public interest. (c) If you sign a Master...

46 CFR 11.463 - General requirements for endorsements as master, mate (pilot), and apprentice mate (steersman) of...

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false General requirements for endorsements as master, mate... Professional Requirements for Deck Officers § 11.463 General requirements for endorsements as master, mate... endorsements: (1) Master of towing vessels. (2) Master of towing vessels, limited. (3) Mate (pilot) of towing...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 1 2013-10-01 2013-10-01 false Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 1 2014-10-01 2014-10-01 false Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

21 CFR 111.205 - What is the requirement to establish a master manufacturing record?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 2 2013-04-01 2013-04-01 false What is the requirement to establish a master... System: Requirements for the Master Manufacturing Record § 111.205 What is the requirement to establish a master manufacturing record? (a) You must prepare and follow a written master manufacturing record for...

43 CFR 30.122 - Is the judge required to accept the master's recommended decision?

Code of Federal Regulations, 2011 CFR

2011-10-01

... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false Is the judge required to accept the master... accept the master's recommended decision? No, the judge is not required to accept the master's... the record of the proceedings heard by the master, including any objections and responses filed, and...

Defense.gov Special Report: A Nation's Gratitude

Science.gov Websites

Deployments, 2003-2006 Baghdad, Ramadi Air Force Master Sgt. Jessica R. Coombs Air Force Master Sgt. Jessica R . Coombs 40th Expeditionary Support Squadron June 2011 - December 2011 Ali Air Base Indiana Army Master Sgt Multiple Deployments, 2004-2007 Fallujah, Ramadi Air Force Master Sgt. Jeremy G. Coombs Air Force Master

USNO Master Clock - Naval Oceanography Portal

Science.gov Websites

section Advanced Search... Sections Home Time Earth Orientation Astronomy Meteorology Oceanography Ice You are here: Home › USNO › Precise Time › Master Clock USNO Logo USNO Navigation Master Clock GPS Display Clocks TWSTT Telephone Time NTP Info USNO Master Clock clock vault The USNO Master Clock is the

Master Volunteer Life Cycle: A Wide Angle Lens on the Volunteer Experience

ERIC Educational Resources Information Center

Strauss, Andrea Lorek; Rager, Amy

2017-01-01

Extension master volunteer programs, such as master naturalist and master gardener, often focus heavily on volunteer education. The model presented here describes the full life cycle of a master volunteer's experience in the program, putting education in the context of other essential program components. By zooming out to a wide-angle view of the…

Evolutionally dynamic L1 regulation in embryonic stem cells

PubMed Central

Castro-Diaz, Nathaly; Ecco, Gabriela; Coluccio, Andrea; Kapopoulou, Adamandia; Yazdanpanah, Benyamin; Friedli, Marc; Duc, Julien; Jang, Suk Min; Turelli, Priscilla; Trono, Didier

2014-01-01

Mobile elements are important evolutionary forces that challenge genomic integrity. Long interspersed element-1 (L1, also known as LINE-1) is the only autonomous transposon still active in the human genome. It displays an unusual pattern of evolution, with, at any given time, a single active L1 lineage amplifying to thousands of copies before getting replaced by a new lineage, likely under pressure of host restriction factors, which act notably by silencing L1 expression during early embryogenesis. Here, we demonstrate that in human embryonic stem (hES) cells, KAP1 (KRAB [Krüppel-associated box domain]-associated protein 1), the master cofactor of KRAB-containing zinc finger proteins (KRAB-ZFPs) previously implicated in the restriction of endogenous retroviruses, represses a discrete subset of L1 lineages predicted to have entered the ancestral genome between 26.8 million and 7.6 million years ago. In mice, we documented a similar chronologically conditioned pattern, albeit with a much contracted time scale. We could further identify an L1-binding KRAB-ZFP, suggesting that this rapidly evolving protein family is more globally responsible for L1 recognition. KAP1 knockdown in hES cells induced the expression of KAP1-bound L1 elements, but their younger, human-specific counterparts (L1Hs) were unaffected. Instead, they were stimulated by depleting DNA methyltransferases, consistent with recent evidence demonstrating that the PIWI–piRNA (PIWI-interacting RNA) pathway regulates L1Hs in hES cells. Altogether, these data indicate that the early embryonic control of L1 is an evolutionarily dynamic process and support a model in which newly emerged lineages are first suppressed by DNA methylation-inducing small RNA-based mechanisms before KAP1-recruiting protein repressors are selected. PMID:24939876

Functional relationships between the hippocampus and dorsomedial striatum in learning a visual scene-based memory task in rats.

PubMed

Delcasso, Sébastien; Huh, Namjung; Byeon, Jung Seop; Lee, Jihyun; Jung, Min Whan; Lee, Inah

2014-11-19

The hippocampus is important for contextual behavior, and the striatum plays key roles in decision making. When studying the functional relationships with the hippocampus, prior studies have focused mostly on the dorsolateral striatum (DLS), emphasizing the antagonistic relationships between the hippocampus and DLS in spatial versus response learning. By contrast, the functional relationships between the dorsomedial striatum (DMS) and hippocampus are relatively unknown. The current study reports that lesions to both the hippocampus and DMS profoundly impaired performance of rats in a visual scene-based memory task in which the animals were required to make a choice response by using visual scenes displayed in the background. Analysis of simultaneous recordings of local field potentials revealed that the gamma oscillatory power was higher in the DMS, but not in CA1, when the rat performed the task using familiar scenes than novel ones. In addition, the CA1-DMS networks increased coherence at γ, but not at θ, rhythm as the rat mastered the task. At the single-unit level, the neuronal populations in CA1 and DMS showed differential firing patterns when responses were made using familiar visual scenes than novel ones. Such learning-dependent firing patterns were observed earlier in the DMS than in CA1 before the rat made choice responses. The present findings suggest that both the hippocampus and DMS process memory representations for visual scenes in parallel with different time courses and that flexible choice action using background visual scenes requires coordinated operations of the hippocampus and DMS at γ frequencies. Copyright © 2014 the authors 0270-6474/14/3415534-14$15.00/0.

Optimal antibunching in passive photonic devices based on coupled nonlinear resonators

NASA Astrophysics Data System (ADS)

Ferretti, S.; Savona, V.; Gerace, D.

2013-02-01

We propose the use of weakly nonlinear passive materials for prospective applications in integrated quantum photonics. It is shown that strong enhancement of native optical nonlinearities by electromagnetic field confinement in photonic crystal resonators can lead to single-photon generation only exploiting the quantum interference of two coupled modes and the effect of photon blockade under resonant coherent driving. For realistic system parameters in state of the art microcavities, the efficiency of such a single-photon source is theoretically characterized by means of the second-order correlation function at zero-time delay as the main figure of merit, where major sources of loss and decoherence are taken into account within a standard master equation treatment. These results could stimulate the realization of integrated quantum photonic devices based on non-resonant material media, fully integrable with current semiconductor technology and matching the relevant telecom band operational wavelengths, as an alternative to single-photon nonlinear devices based on cavity quantum electrodynamics with artificial atoms or single atomic-like emitters.

High power, compact, picosecond MOPA based on single trench fiber with single polarized diffraction-limited output.

PubMed

Jain, D; Alam, S; Codemard, C; Jung, Y; Zervas, M N; Sahu, J K

2015-09-01

We experimentally demonstrate an all-solid Yb-doped 30 μm core diameter single trench fiber. Measurements ensure a robust effective single-mode operation without the need of tight coiling as required for conventional fibers thanks to the ultralow NA (∼0.038) and resonant ring surrounding the core. All-solid and cylindrical design ensures the suitability for mass scale production with the added benefit of all-fiberized device structure. A compact master oscillator power amplifier (MOPA) has been built using this fiber delivering ∼23.5  ps pulses at 13.5 MHz repetition rate delivering up to ∼52  W of average output power corresponding to a pulse energy of ∼3.8  μJ and peak power of >160  kW, while maintaining ∼76% slope efficiency. The output beam exhibits a polarization extinction ratio of more than 15 dB and a M2 less than 1.15.

Two-color single-photon emission from InAs quantum dots: toward logic information management using quantum light.

PubMed

Rivas, David; Muñoz-Matutano, Guillermo; Canet-Ferrer, Josep; García-Calzada, Raúl; Trevisi, Giovanna; Seravalli, Luca; Frigeri, Paola; Martínez-Pastor, Juan P

2014-02-12

In this work, we propose the use of the Hanbury-Brown and Twiss interferometric technique and a switchable two-color excitation method for evaluating the exciton and noncorrelated electron-hole dynamics associated with single photon emission from indium arsenide (InAs) self-assembled quantum dots (QDs). Using a microstate master equation model we demonstrate that our single QDs are described by nonlinear exciton dynamics. The simultaneous detection of two-color, single photon emission from InAs QDs using these nonlinear dynamics was used to design a NOT AND logic transference function. This computational functionality combines the advantages of working with light/photons as input/output device parameters (all-optical system) and that of a nanodevice (QD size of ∼ 20 nm) while also providing high optical sensitivity (ultralow optical power operational requirements). These system features represent an important and interesting step toward the development of new prototypes for the incoming quantum information technologies.

Point of purchase cigarette promotions before and after the Master Settlement Agreement: exploring retail scanner data.

PubMed

Loomis, B R; Farrelly, M C; Nonnemaker, J M; Mann, N H

2006-04-01

Evidence indicates that point of purchase (POP) advertising and promotions for cigarettes have increased since the Master Settlement Agreement (MSA). Retail promotions have the potential to offset the effects of cigarette tax and price increases and tobacco control programmes. To describe the trend in the proportion of cigarette sales that occur as part of a POP promotion before and after the MSA. Scanner data were analysed on cigarette sales from a national sample of grocery stores, reported quarterly from 1994 through 2003. The proportion of total cigarette sales that occurred under any of three different types of POP promotions is presented. The proportion of cigarettes sold under a POP promotion increased notably over the sample period. Large increases in promoted sales are observed following implementation of the MSA and during periods of sustained cigarette excise tax increases. The observed pattern of promoted cigarette sales is suggestive of a positive relationship between retail cigarette promotions, the MSA, and state cigarette tax increases. More research is needed to describe fully the relationship between cigarette promotions and tobacco control policy.

Customizing FP-growth algorithm to parallel mining with Charm++ library

NASA Astrophysics Data System (ADS)

Puścian, Marek

2017-08-01

This paper presents a frequent item mining algorithm that was customized to handle growing data repositories. The proposed solution applies Master Slave scheme to frequent pattern growth technique. Efficient utilization of available computation units is achieved by dynamic reallocation of tasks. Conditional frequent trees are assigned to parallel workers basing on their workload. Proposed enhancements have been successfully implemented using Charm++ library. This paper discusses results of the performance of parallelized FP-growth algorithm against different datasets. The approach has been illustrated with many experiments and measurements performed using multiprocessor and multithreaded computer.

Dismantling a Master Narrative: Using Culturally Responsive Pedagogy to Teach the History of Art Education

ERIC Educational Resources Information Center

Acuff, Joni Boyd; Hirak, Brent; Nangah, Mary

2012-01-01

The consequence of narratives becoming stagnant or controlled is that they become a Master Narrative. The Master Narrative is an "ideological script that is being imposed by the people in authority on everybody else: The Master Fiction... history" (Moyers, 1990, para. 4). Master Narratives use myths and ideologies to sustain a sanitized version of…

46 CFR 11.459 - Service requirements for master or mate of rivers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Service requirements for master or mate of rivers. 11... requirements for master or mate of rivers. (a) An applicant for an endorsement as master of river steam or motor vessels of any gross tons must meet the same service requirements as master of inland steam or...

46 CFR 11.459 - Service requirements for master or mate of rivers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Service requirements for master or mate of rivers. 11... requirements for master or mate of rivers. (a) An applicant for an endorsement as master of river steam or motor vessels of any gross tons must meet the same service requirements as master of inland steam or...

46 CFR 11.459 - Service requirements for master or mate of rivers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Service requirements for master or mate of rivers. 11... requirements for master or mate of rivers. (a) An applicant for an endorsement as master of river steam or motor vessels of any gross tons must meet the same service requirements as master of inland steam or...

46 CFR 11.459 - Service requirements for master or mate of rivers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Service requirements for master or mate of rivers. 11... requirements for master or mate of rivers. (a) An applicant for an endorsement as master of river steam or motor vessels of any gross tons must meet the same service requirements as master of inland steam or...

Prevalence of Subclinical Coronary Artery Disease in Masters Endurance Athletes With a Low Atherosclerotic Risk Profile.

PubMed

Merghani, Ahmed; Maestrini, Viviana; Rosmini, Stefania; Cox, Andrew T; Dhutia, Harshil; Bastiaenan, Rachel; David, Sarojini; Yeo, Tee Joo; Narain, Rajay; Malhotra, Aneil; Papadakis, Michael; Wilson, Mathew G; Tome, Maite; AlFakih, Khaled; Moon, James C; Sharma, Sanjay

2017-07-11

Studies in middle-age and older (masters) athletes with atherosclerotic risk factors for coronary artery disease report higher coronary artery calcium (CAC) scores compared with sedentary individuals. Few studies have assessed the prevalence of coronary artery disease in masters athletes with a low atherosclerotic risk profile. We assessed 152 masters athletes 54.4±8.5 years of age (70% male) and 92 controls of similar age, sex, and low Framingham 10-year coronary artery disease risk scores with an echocardiogram, exercise stress test, computerized tomographic coronary angiogram, and cardiovascular magnetic resonance imaging with late gadolinium enhancement and a 24-hour Holter. Athletes had participated in endurance exercise for an average of 31±12.6 years. The majority (77%) were runners, with a median of 13 marathon runs per athlete. Most athletes (60%) and controls (63%) had a normal CAC score. Male athletes had a higher prevalence of atherosclerotic plaques of any luminal irregularity (44.3% versus 22.2%; P =0.009) compared with sedentary males, and only male athletes showed a CAC ≥300 Agatston units (11.3%) and a luminal stenosis ≥50% (7.5%). Male athletes demonstrated predominantly calcific plaques (72.7%), whereas sedentary males showed predominantly mixed morphology plaques (61.5%). The number of years of training was the only independent variable associated with increased risk of CAC >70th percentile for age or luminal stenosis ≥50% in male athletes (odds ratio, 1.08; 95% confidence interval, 1.01-1.15; P =0.016); 15 (14%) male athletes but none of the controls revealed late gadolinium enhancement on cardiovascular magnetic resonance imaging. Of these athletes, 7 had a pattern consistent with previous myocardial infarction, including 3(42%) with a luminal stenosis ≥50% in the corresponding artery. Most lifelong masters endurance athletes with a low atherosclerotic risk profile have normal CAC scores. Male athletes are more likely to have a CAC score >300 Agatston units or coronary plaques compared with sedentary males with a similar risk profile. The significance of these observations is uncertain, but the predominantly calcific morphology of the plaques in athletes indicates potentially different pathophysiological mechanisms for plaque formation in athletic versus sedentary men. Coronary plaques are more abundant in athletes, whereas their stable nature could mitigate the risk of plaque rupture and acute myocardial infarction. © 2017 American Heart Association, Inc.

Patterns of Gram-stained fecal flora as a quick diagnostic marker in patients with severe SIRS.

PubMed

Shimizu, Kentaro; Ogura, Hiroshi; Tomono, Kazunori; Tasaki, Osamu; Asahara, Takashi; Nomoto, Koji; Morotomi, Masami; Matsushima, Asako; Nakahori, Yasutaka; Yamano, Shuhei; Osuka, Akinori; Kuwagata, Yasuyuki; Sugimoto, Hisashi

2011-06-01

The gut is an important target organ of injury during critically ill conditions. Although Gram staining is a common and quick method for identifying bacteria, its clinical application has not been fully evaluated in critically ill conditions. This study's aims were to identify patterns of Gram-stained fecal flora and compare them to cultured bacterial counts and to investigate the association between the patterns and septic complications in patients with severe systemic inflammatory response syndrome (SIRS). Fifty-two patients with SIRS were included whose Gram-stained fecal flora was classified into three patterns. In a diverse pattern, large numbers of multiple kinds of bacteria completely covered the field. In a single pattern, one specific kind of bacteria or fungi predominantly covered the field. In a depleted pattern, most bacteria were diminished in the field. In the analysis of fecal flora, the numbers of total obligate anaerobes in the depleted pattern was significantly lower than those in the diverse pattern and single pattern (p < 0.05). The concentrations of total organic acids, acetic acid, and propionic acid in the depleted pattern were significantly lower than those in diverse pattern and single pattern (p < 0.05). Mortality due to multiple organ dysfunction syndrome for the single pattern (52%) and the depleted pattern (64%) was significantly higher than that for the diverse pattern (6%) (p < 0.05). Gram-stained fecal flora can be classified into three patterns and are associated with both cultured bacterial counts and clinical information. Gram-stained fecal bacteria can be used as a quick bedside diagnostic marker for severe SIRS patients.

The Chandra Source Catalog 2.0: Interfaces

NASA Astrophysics Data System (ADS)

D'Abrusco, Raffaele; Zografou, Panagoula; Tibbetts, Michael; Allen, Christopher E.; Anderson, Craig S.; Budynkiewicz, Jamie A.; Burke, Douglas; Chen, Judy C.; Civano, Francesca Maria; Doe, Stephen M.; Evans, Ian N.; Evans, Janet D.; Fabbiano, Giuseppina; Gibbs, Danny G., II; Glotfelty, Kenny J.; Graessle, Dale E.; Grier, John D.; Hain, Roger; Hall, Diane M.; Harbo, Peter N.; Houck, John C.; Lauer, Jennifer L.; Laurino, Omar; Lee, Nicholas P.; Martínez-Galarza, Rafael; McCollough, Michael L.; McDowell, Jonathan C.; Miller, Joseph; McLaughlin, Warren; Morgan, Douglas L.; Mossman, Amy E.; Nguyen, Dan T.; Nichols, Joy S.; Nowak, Michael A.; Paxson, Charles; Plummer, David A.; Primini, Francis Anthony; Rots, Arnold H.; Siemiginowska, Aneta; Sundheim, Beth A.; Van Stone, David W.

2018-01-01

Easy-to-use, powerful public interfaces to access the wealth of information contained in any modern, complex astronomical catalog are fundamental to encourage its usage. In this poster,I present the public interfaces of the second Chandra Source Catalog (CSC2). CSC2 is the most comprehensive catalog of X-ray sources detected by Chandra, thanks to the inclusion of Chandra observations public through the end of 2014 and to methodological advancements. CSC2 provides measured properties for a large number of sources that sample the X-ray sky at fainter levels than the previous versions of the CSC, thanks to the stacking of single overlapping observations within 1’ before source detection. Sources from stacks are then crossmatched, if multiple stacks cover the same area of the sky, to create a list of unique, optimal CSC2 sources. The properties of sources detected in each single stack and each single observation are also measured. The layered structure of the CSC2 catalog is mirrored in the organization of the CSC2 database, consisting of three tables containing all properties for the unique stacked sources (“Master Source”), single stack sources (“Stack Source”) and sources in any single observation (“Observation Source”). These tables contain estimates of the position, flags, extent, significances, fluxes, spectral properties and variability (and associated errors) for all classes of sources. The CSC2 also includes source region and full-field data products for all master sources, stack sources and observation sources: images, photon event lists, light curves and spectra.CSCview, the main interface to the CSC2 source properties and data products, is a GUI tool that allows to build queries based on the values of all properties contained in CSC2 tables, query the catalog, inspect the returned table of source properties, browse and download the associated data products. I will also introduce the suite of command-line interfaces to CSC2 that can be used in alternative to CSCview, and will present the concept for an additional planned cone-search web-based interface.This work has been supported by NASA under contract NAS 8-03060 to the Smithsonian Astrophysical Observatory for operation of the Chandra X-ray Center.

Aptamer Selection Express: A Novel Method for Rapid Single-Step Selection and Sensing of Aptamers

DTIC Science & Technology

2008-12-01

sample) was as follows: 5 µL buffer, 2 µL MgCl2, 2.5 µL DMSO, 1 µL betaine , 1 µL each dNTP, 2.5 µL F primer, 2.5 µL R primer, 0.54 µL taq polymerase...and 25.1 µL H2O. Betaine and increased DMSO were added to the master mix to eliminate polymerase jumping during PCR ampli- fication.10 Using the

Packet Controller For Wireless Headset

NASA Technical Reports Server (NTRS)

Christensen, Kurt K.; Swanson, Richard J.

1993-01-01

Packet-message controller implements communications protocol of network of wireless headsets. Designed for headset application, readily adapted to other uses; slight modification enables controller to implement Integrated Services Digital Network (ISDN) X.25 protocol, giving far-reaching applications in telecommunications. Circuit converts continuous voice signals into digital packets of data and vice versa. Operates in master or slave mode. Controller reduced to single complementary metal oxide/semiconductor integrated-circuit chip. Occupies minimal space in headset and consumes little power, extending life of headset battery.

A Multiple Time-Step Finite State Projection Algorithm for the Solution to the Chemical Master Equation

DTIC Science & Technology

2006-11-30

except in the simplest of circumstances. This belief has driven the com- putational research community to devise clever kinetic Monte Carlo ( KMC ... KMC rou- tine is very slow; cutting the error in half requires four times the number of simulations. Since a single simulation may contain huge numbers...subintervals [9–14]. Both approximation types, system partitioning and τ leaping, have been very successful in increasing the scope of problems to which KMC

Visual communication in presentation on physics

NASA Astrophysics Data System (ADS)

Grebenyuk, Konstantin A.

2005-06-01

It is essential that our audience be attentive during lecture, report or another presentation on physics. Therefore we have to take care of both speech and visual communication with audience. Three important aspects of successful visual aids use are singled out in this paper. The main idea is that physicists could appreciably increase efficiency of their presentations by use of these simple principles of presentation art. Recommendations offered are results of special literature research, author' s observations and experience of communication with skilled masters of presentations.

An Integrated Approach to the Selection Process of Independent Research and Development Projects

DTIC Science & Technology

1991-03-01

11Q.Tr’Pc 12 PERSONAL AUTHOR($) Larson, Carol L. 1j& TYPE QF REPORT 13b TIME COVERED 14 DATE OF REPORT (Year, Month, Day) S1 PAGE COUNT Master’s Thesis...the miodel will be improved. In the area of subjective decision-making, researchers have shown that group consensus is superior to the single person ...criteria and their relative weights is to provide scoring sheets to a number of specialists, who make independent, personal subjective decisions on

TIGER 2010 Boundaries

EPA Pesticide Factsheets

This EnviroAtlas web service supports research and online mapping activities related to EnviroAtlas (https://www.epa.gov/enviroatlas). This web service includes the State, County, and Census Block Groups boundaries from the TIGER shapefiles compiled into a single national coverage for each layer. The TIGER/Line Files are shapefiles and related database files (.dbf) that are an extract of selected geographic and cartographic information from the U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB).

Eager protocol on a cache pipeline dataflow

DOEpatents

Ohmacht, Martin; Sugavanam, Krishnan

2012-11-13

A master device sends a request to communicate with a slave device to a switch. The master device waits for a period of cycles the switch takes to decide whether the master device can communicate with the slave device, and the master device sends data associated with the request to communicate at least after the period of cycles has passed since the master device sent the request to communicate to the switch without waiting to receive an acknowledgment from the switch that the master device can communicate with the slave device.

Parameter estimation by decoherence in the double-slit experiment

NASA Astrophysics Data System (ADS)

Matsumura, Akira; Ikeda, Taishi; Kukita, Shingo

2018-06-01

We discuss a parameter estimation problem using quantum decoherence in the double-slit interferometer. We consider a particle coupled to a massive scalar field after the particle passing through the double slit and solve the dynamics non-perturbatively for the coupling by the WKB approximation. This allows us to analyze the estimation problem which cannot be treated by master equation used in the research of quantum probe. In this model, the scalar field reduces the interference fringes of the particle and the fringe pattern depends on the field mass and coupling. To evaluate the contrast and the estimation precision obtained from the pattern, we introduce the interferometric visibility and the Fisher information matrix of the field mass and coupling. For the fringe pattern observed on the distant screen, we derive a simple relation between the visibility and the Fisher matrix. Also, focusing on the estimation precision of the mass, we find that the Fisher information characterizes the wave-particle duality in the double-slit interferometer.

Formalization and analysis of reasoning by assumption.

PubMed

Bosse, Tibor; Jonker, Catholijn M; Treur, Jan

2006-01-02

This article introduces a novel approach for the analysis of the dynamics of reasoning processes and explores its applicability for the reasoning pattern called reasoning by assumption. More specifically, for a case study in the domain of a Master Mind game, it is shown how empirical human reasoning traces can be formalized and automatically analyzed against dynamic properties they fulfill. To this end, for the pattern of reasoning by assumption a variety of dynamic properties have been specified, some of which are considered characteristic for the reasoning pattern, whereas some other properties can be used to discriminate among different approaches to the reasoning. These properties have been automatically checked for the traces acquired in experiments undertaken. The approach turned out to be beneficial from two perspectives. First, checking characteristic properties contributes to the empirical validation of a theory on reasoning by assumption. Second, checking discriminating properties allows the analyst to identify different classes of human reasoners. 2006 Lawrence Erlbaum Associates, Inc.

A novel statistical approach for identification of the master regulator transcription factor.

PubMed

Sikdar, Sinjini; Datta, Susmita

2017-02-02

Transcription factors are known to play key roles in carcinogenesis and therefore, are gaining popularity as potential therapeutic targets in drug development. A 'master regulator' transcription factor often appears to control most of the regulatory activities of the other transcription factors and the associated genes. This 'master regulator' transcription factor is at the top of the hierarchy of the transcriptomic regulation. Therefore, it is important to identify and target the master regulator transcription factor for proper understanding of the associated disease process and identifying the best therapeutic option. We present a novel two-step computational approach for identification of master regulator transcription factor in a genome. At the first step of our method we test whether there exists any master regulator transcription factor in the system. We evaluate the concordance of two ranked lists of transcription factors using a statistical measure. In case the concordance measure is statistically significant, we conclude that there is a master regulator. At the second step, our method identifies the master regulator transcription factor, if there exists one. In the simulation scenario, our method performs reasonably well in validating the existence of a master regulator when the number of subjects in each treatment group is reasonably large. In application to two real datasets, our method ensures the existence of master regulators and identifies biologically meaningful master regulators. An R code for implementing our method in a sample test data can be found in http://www.somnathdatta.org/software . We have developed a screening method of identifying the 'master regulator' transcription factor just using only the gene expression data. Understanding the regulatory structure and finding the master regulator help narrowing the search space for identifying biomarkers for complex diseases such as cancer. In addition to identifying the master regulator our method provides an overview of the regulatory structure of the transcription factors which control the global gene expression profiles and consequently the cell functioning.

Number of repetitions required to retain single-digit multiplication math facts for elementary students.

PubMed

Burns, Matthew K; Ysseldyke, Jim; Nelson, Peter M; Kanive, Rebecca

2015-09-01

Computational fluency is an important aspect of math proficiency. Despite widely held beliefs about the differential difficulty of single-digit multiplication math facts, little empirical work has examined this issue. The current study analyzed the number of repetitions needed to master multiplication math facts. Data from 15,402 3rd, 4th, and 5th graders were analyzed using a national database. Results suggested that (a) students with lower math skills required significantly (p < .001) more repetitions than more skilled students; (b) across all students, single-digit multiplication facts with 4s, 5s, 6s, and 7s required significantly (p < .001) more repetition than did 2s and 3s; and (c) the number of practice sessions needed to attain mastery significantly (p < .001) decreased with increase in grade level. Implications for instructional planning and implementation are discussed. (c) 2015 APA, all rights reserved).

Single-nucleus analysis of accessible chromatin in developing mouse forebrain reveals cell-type-specific transcriptional regulation.

PubMed

Preissl, Sebastian; Fang, Rongxin; Huang, Hui; Zhao, Yuan; Raviram, Ramya; Gorkin, David U; Zhang, Yanxiao; Sos, Brandon C; Afzal, Veena; Dickel, Diane E; Kuan, Samantha; Visel, Axel; Pennacchio, Len A; Zhang, Kun; Ren, Bing

2018-03-01

Analysis of chromatin accessibility can reveal transcriptional regulatory sequences, but heterogeneity of primary tissues poses a significant challenge in mapping the precise chromatin landscape in specific cell types. Here we report single-nucleus ATAC-seq, a combinatorial barcoding-assisted single-cell assay for transposase-accessible chromatin that is optimized for use on flash-frozen primary tissue samples. We apply this technique to the mouse forebrain through eight developmental stages. Through analysis of more than 15,000 nuclei, we identify 20 distinct cell populations corresponding to major neuronal and non-neuronal cell types. We further define cell-type-specific transcriptional regulatory sequences, infer potential master transcriptional regulators and delineate developmental changes in forebrain cellular composition. Our results provide insight into the molecular and cellular dynamics that underlie forebrain development in the mouse and establish technical and analytical frameworks that are broadly applicable to other heterogeneous tissues.

Titanium-doped sapphire laser research and design study

NASA Technical Reports Server (NTRS)

Moulton, Peter F.

1987-01-01

Three main topics were considered in this study: the fundamental laser parameters of titanium-doped sapphire, characterization of commercially grown material, and design of a tunable, narrow-linewidth laser. Fundamental parameters investigated included the gain cross section, upper-state lifetime as a function of temperature and the surface-damage threshold. Commercial material was found to vary widely in the level of absorption of the laser wavelength with the highest absorption in Czochralski-grown crystals. Several Yi:sapphire lasers were constructed, including a multimode laser with greater than 50mJ of output energy and a single-transverse-mode ring laser, whose spectral and temporal characteristics were completely characterized. A design for a narrow-linewidth (single-frequency) Ti:sapphire laser was developed, based on the results of the experimental work. The design involves the use of a single-frequency, quasi-cw master oscillator, employed as an injection source for a pulsed ring laser.

10 W single-mode Er/Yb co-doped all-fiber amplifier with suppressed Yb-ASE

NASA Astrophysics Data System (ADS)

Sobon, G.; Sliwinska, D.; Abramski, K. M.; Kaczmarek, P.

2014-02-01

In this work we demonstrate a single-frequency, single-mode all-fiber master oscillator power amplifier (MOPA) source, based on erbium-ytterbium co-doped double-clad fiber emitting 10 W of continuous wave power at 1565 nm. In the power amplifier stage, the amplified spontaneous emission from Yb3+ ions (Yb-ASE) is forced to recirculate in a loop resonator in order to provide stable lasing at 1060 nm. The generated signal acts as an additional pump source for the amplifier and is reabsorbed by the Yb3+ ions in the active fiber, allowing an increase in the efficiency and boosting the output power. The feedback loop also protects the amplifier from parasitic lasing or self-pulsing at a wavelength of 1 μm. This allows one to significantly scale the output power in comparison to a conventional setup without any Yb-ASE control.

Master Principals' Perceptions of the Impact of the Arkansas Leadership Academy's Master Principal Program on Leadership Practices, School Cultures and Student Achievement

ERIC Educational Resources Information Center

Peer, Diana

2012-01-01

A qualitative dissertation study was conducted to examine the impact of the Arkansas Leadership Academy's Master Principal Program through the perspective of those who have completed the entire program and attained designation as a Master Principal. A logic model for the Master Principal Program offered a context for the study. A review of…

Non-Markovian dynamics of a qubit due to single-photon scattering in a waveguide

NASA Astrophysics Data System (ADS)

Fang, Yao-Lung L.; Ciccarello, Francesco; Baranger, Harold U.

2018-04-01

We investigate the open dynamics of a qubit due to scattering of a single photon in an infinite or semi-infinite waveguide. Through an exact solution of the time-dependent multi-photon scattering problem, we find the qubit's dynamical map. Tools of open quantum systems theory allow us then to show the general features of this map, find the corresponding non-Linbladian master equation, and assess in a rigorous way its non-Markovian nature. The qubit dynamics has distinctive features that, in particular, do not occur in emission processes. Two fundamental sources of non-Markovianity are present: the finite width of the photon wavepacket and the time delay for propagation between the qubit and the end of the semi-infinite waveguide.

Consequences of Irreversibility in Fundamental Models of Transcription

NASA Astrophysics Data System (ADS)

Sevier, Stuart; Levine, Herbert

2015-03-01

The ability to watch biochemical events play out at the single-molecule level has led to the discovery that transcription occurs in a noisy, ``bursty'' manner. Recently, as the single-molecule lens is placed over a larger number of organisms and genes, relationships between mean expression and noise beyond the ``bursty'' paradigm have emerged. Through a master-equation formulation of transcription we have found that many powerful physical principles relating to irreversibility seem to play a central role in the newly uncovered trends. Specifically, the relationships between mean expression and noise appears to be a direct consequence of network currents. We discuss how emphasizing the underlying principles in the models can explain recent experimental data and lead to a generalized view of transcription.

High power, high signal-to-noise ratio single-frequency 1μm Brillouin all-fiber laser

NASA Astrophysics Data System (ADS)

Wang, Jing; Hou, Yubin; Zhang, Qian; Jin, Dongchen; Sun, Ruoyu; Shi, Hongxing; Liu, Jiang; Wang, Pu

2016-03-01

We demonstrate a high-power, high signal-to-noise ratio single-frequency 1 μm Brillouin all-fiber laser with high slope efficiency. The Brillouin laser system consists of a high-power single-frequency fiber laser and a single-pass Brillouin ring cavity. The high-power single-frequency fiber laser is one-stage master-oscillator power amplifier with the maximum output power of 10.33 W, the signal-to-noise ratio of 50 dB and the slope efficiency of 46%. The Brillouin fiber laser is pumped by the amplified laser with a linewidth of 33 kHz and an output power of 2.61 W limited by the damage threshold of the optical isolator. By optimizing the length of the Brillouin ring cavity to 10 m, stable singlefrequency Brillouin fiber laser is obtained with 3 kHz linewidth owing to the linewidth narrowing effect. At the launched pump power of 2.15 W, the Brillouin fiber laser generates maximum output power of 1.4 W with a slope efficiency of 79% and the optical signal-to-noise ratio of 77 dB.

Alcohol consumption patterns among Mexican American mothers and among children from single- and dual-headed households: findings from HHANES 1982-84.

PubMed Central

Stroup-Benham, C A; Treviño, F M; Treviño, D B

1990-01-01

Data from the southwestern United States sample of the Hispanic Health and Nutrition Examination Survey were employed to compare the patterns of alcohol use among Mexican American mothers and children in female-headed households with use patterns among mothers and children in couple-headed households. Single female heads of household drank more alcoholic beverages on more days than females from dual-headed households. As a whole, the children of single heads of household still living at home did not demonstrate significantly different drinking patterns from their dual-headed household counterparts. While male children of single-headed households drank more days and total drinks than their dual-headed household counterparts, female children of dual-headed households drank more days and total drinks than female children from single-headed households. PMID:9187580

Facilitating the development of higher-order thinking skills (HOTS) of novice nursing postgraduates in Africa.

PubMed

Roets, Lizeth; Maritz, Jeanette

2017-02-01

International research in nursing education has shown to be deficient regarding both the quality of research produced and the building of disciplinary capacity. The CHENMA (Collaboration for Higher Education of Nurses and Midwives in Africa) project aimed to strengthen nursing and midwifery expertise in Africa. Sixteen French-speaking students of the Democratic Republic of the Congo (DRC) enrolled for a master's degree in nursing midwifery at a South African university in 2008. Ten of the initial 16 students graduated with a master's degree in 2012. One student withdrew and five students completed a postgraduate diploma in midwifery. The objective of this paper is to explore the quality of the output of those master's degree students, namely their dissertation (with specific reference to the demonstration of HOTS). An exploratory, evaluative, single, descriptive case study was utilised. Realist, purposeful sampling was used. Six of the 10 completed final dissertations were evaluated as well as three reflective reports from the supervisor, translator and critical reader. The findings indicated that most dissertations fell below the expected standard, with a paucity of higher-order thinking and application skills. Language, and possibly cultural dynamics, seemed to be the largest barrier to learning and communication. The dissertations lacked conceptual skills, scientific writing skills, logical order of thought and congruency. Analysis of the dissertations revealed a limited ability of novice scholars to explore the nature of information and to interpret and manipulate the data in a novel way. Copyright © 2016 Elsevier Ltd. All rights reserved.

Managed Development Environment Successes for MSFC's VIPA Team

NASA Technical Reports Server (NTRS)

Finckenor, Jeff; Corder, Gary; Owens, James; Meehan, Jim; Tidwell, Paul H.

2005-01-01

This paper outlines the best practices of the Vehicle Design Team for VIPA. The functions of the VIPA Vehicle Design (VVD) discipline team are to maintain the controlled reference geometry and provide linked, simplified geometry for each of the other discipline analyses. The core of the VVD work, and the approach for VVD s first task of controlling the reference geometry, involves systems engineering, top-down, layout-based CAD modeling within a Product Data Manager (PDM) development environment. The top- down approach allows for simple control of very large, integrated assemblies and greatly enhances the ability to generate trade configurations and reuse data. The second VVD task, model simplification for analysis, is handled within the managed environment through application of the master model concept. In this approach, there is a single controlling, or master, product definition dataset. Connected to this master model are reference datasets with live geometric and expression links. The referenced models can be for drawings, manufacturing, visualization, embedded analysis, or analysis simplification. A discussion of web based interaction, including visualization, between the design and other disciplines is included. Demonstrated examples are cited, including the Space Launch Initiative development cycle, the Saturn V systems integration and verification cycle, an Orbital Space Plane study, and NASA Exploration Office studies of Shuttle derived and clean sheet launch vehicles. The VIPA Team has brought an immense amount of detailed data to bear on program issues. A central piece of that success has been the Managed Development Environment and the VVD Team approach to modeling.

Fermi’s golden rule, the origin and breakdown of Markovian master equations, and the relationship between oscillator baths and the random matrix model

NASA Astrophysics Data System (ADS)

Santra, Siddhartha; Cruikshank, Benjamin; Balu, Radhakrishnan; Jacobs, Kurt

2017-10-01

Fermi’s golden rule applies to a situation in which a single quantum state \\vert \\psi> is coupled to a near-continuum. This ‘quasi-continuum coupling’ structure results in a rate equation for the population of \\vert \\psi> . Here we show that the coupling of a quantum system to the standard model of a thermal environment, a bath of harmonic oscillators, can be decomposed into a ‘cascade’ made up of the quasi-continuum coupling structures of Fermi’s golden rule. This clarifies the connection between the physics of the golden rule and that of a thermal bath, and provides a non-rigorous but physically intuitive derivation of the Markovian master equation directly from the former. The exact solution to the Hamiltonian of the golden rule, known as the Bixon-Jortner model, generalized for an asymmetric spectrum, provides a window on how the evolution induced by the bath deviates from the master equation as one moves outside the Markovian regime. Our analysis also reveals the relationship between the oscillator bath and the ‘random matrix model’ (RMT) of a thermal bath. We show that the cascade structure is the one essential difference between the two models, and the lack of it prevents the RMT from generating transition rates that are independent of the initial state of the system. We suggest that the cascade structure is one of the generic elements of thermalizing many-body systems.

Seeing a straight line on a curved surface: decoupling of patterns from surfaces by single IT neurons

PubMed Central

Ratan Murty, N. Apurva

2016-01-01

We have no difficulty seeing a straight line drawn on a paper even when the paper is bent, but this inference is in fact nontrivial. Doing so requires either matching local features or representing the pattern after factoring out the surface shape. Here we show that single neurons in the monkey inferior temporal (IT) cortex show invariant responses to patterns across rigid and nonrigid changes of surfaces. We recorded neuronal responses to stimuli in which the pattern and the surrounding surface were varied independently. In a subset of neurons, we found pattern-surface interactions that produced similar responses to stimuli across congruent pattern and surface transformations. These interactions produced systematic shifts in curvature tuning of patterns when overlaid on convex and flat surfaces. Our results show that surfaces are factored out of patterns by single neurons, thereby enabling complex perceptual inferences. NEW & NOTEWORTHY We have no difficulty seeing a straight line on a curved piece of paper, but in fact, doing so requires decoupling the shape of the surface from the pattern itself. Here we report a novel form of invariance in the visual cortex: single neurons in monkey inferior temporal cortex respond similarly to congruent transformations of patterns and surfaces, in effect decoupling patterns from the surface on which they are overlaid. PMID:27733595

The Chandra Source Catalog: User Interface

NASA Astrophysics Data System (ADS)

Bonaventura, Nina; Evans, I. N.; Harbo, P. N.; Rots, A. H.; Tibbetts, M. S.; Van Stone, D. W.; Zografou, P.; Anderson, C. S.; Chen, J. C.; Davis, J. E.; Doe, S. M.; Evans, J. D.; Fabbiano, G.; Galle, E.; Gibbs, D. G.; Glotfelty, K. J.; Grier, J. D.; Hain, R.; Hall, D. M.; He, X.; Houck, J. C.; Karovska, M.; Lauer, J.; McCollough, M. L.; McDowell, J. C.; Miller, J. B.; Mitschang, A. W.; Morgan, D. L.; Nichols, J. S.; Nowak, M. A.; Plummer, D. A.; Primini, F. A.; Refsdal, B. L.; Siemiginowska, A. L.; Sundheim, B. A.; Winkelman, S. L.

2009-01-01

The Chandra Source Catalog (CSC) is the definitive catalog of all X-ray sources detected by Chandra. The CSC is presented to the user in two tables: the Master Chandra Source Table and the Table of Individual Source Observations. Each distinct X-ray source identified in the CSC is represented by a single master source entry and one or more individual source entries. If a source is unaffected by confusion and pile-up in multiple observations, the individual source observations are merged to produce a master source. In each table, a row represents a source, and each column a quantity that is officially part of the catalog. The CSC contains positions and multi-band fluxes for the sources, as well as derived spatial, spectral, and temporal source properties. The CSC also includes associated source region and full-field data products for each source, including images, photon event lists, light curves, and spectra. The master source properties represent the best estimates of the properties of a source, and are presented in the following categories: Position and Position Errors, Source Flags, Source Extent and Errors, Source Fluxes, Source Significance, Spectral Properties, and Source Variability. The CSC Data Access GUI provides direct access to the source properties and data products contained in the catalog. The user may query the catalog database via a web-style search or an SQL command-line query. Each query returns a table of source properties, along with the option to browse and download associated data products. The GUI is designed to run in a web browser with Java version 1.5 or higher, and may be accessed via a link on the CSC website homepage (http://cxc.harvard.edu/csc/). As an alternative to the GUI, the contents of the CSC may be accessed directly through a URL, using the command-line tool, cURL. Support: NASA contract NAS8-03060 (CXC).

Hierarchy of orofacial rhythms revealed through whisking and breathing

PubMed Central

Moore, Jeffrey D.; Deschênes, Martin; Furuta, Takahiro; Huber, Daniel; Smear, Matthew C.; Demers, Maxime; Kleinfeld, David

2014-01-01

Whisking and sniffing are predominant aspects of exploratory behavior in rodents, yet the neural mechanisms that generate their motor patterns remain largely uncharacterized. We use anatomical, behavioral, electrophysiological, and pharmacological tools to demonstrate that these patterns are coordinated by respiratory centers in the ventral medulla. We delineate a distinct region in the ventral medulla that provides rhythmic input to the facial motoneurons that drive protraction of the vibrissae. Neuronal output from this region is reset at each inspiration by direct input from the preBötzinger complex, such that high frequency sniffing has a one-to-one coordination with whisking while basal respiration is accompanied by intervening whisks that occur between breaths. We conjecture that the respiratory nuclei, which project to other premotor regions for oral and facial control, function as a master clock for behaviors that coordinate with breathing. PMID:23624373