DeepQA: improving the estimation of single protein model quality with deep belief networks.

PubMed

Cao, Renzhi; Bhattacharya, Debswapna; Hou, Jie; Cheng, Jianlin

2016-12-05

Protein quality assessment (QA) useful for ranking and selecting protein models has long been viewed as one of the major challenges for protein tertiary structure prediction. Especially, estimating the quality of a single protein model, which is important for selecting a few good models out of a large model pool consisting of mostly low-quality models, is still a largely unsolved problem. We introduce a novel single-model quality assessment method DeepQA based on deep belief network that utilizes a number of selected features describing the quality of a model from different perspectives, such as energy, physio-chemical characteristics, and structural information. The deep belief network is trained on several large datasets consisting of models from the Critical Assessment of Protein Structure Prediction (CASP) experiments, several publicly available datasets, and models generated by our in-house ab initio method. Our experiments demonstrate that deep belief network has better performance compared to Support Vector Machines and Neural Networks on the protein model quality assessment problem, and our method DeepQA achieves the state-of-the-art performance on CASP11 dataset. It also outperformed two well-established methods in selecting good outlier models from a large set of models of mostly low quality generated by ab initio modeling methods. DeepQA is a useful deep learning tool for protein single model quality assessment and protein structure prediction. The source code, executable, document and training/test datasets of DeepQA for Linux is freely available to non-commercial users at http://cactus.rnet.missouri.edu/DeepQA/ .

EVALUATION OF MULTIPLE AQUATIC BIOMONITORS FOR SOURCE WATER PROTECTION

EPA Science Inventory

A variety of probes for use in continuous monitoring of water quality exist. They range from single parameter chemical/physical probes to comprehensive screening systems based on whole organism responses. Originally developed for monitoring specific characteristics of water qua...

The relationship between self-management abilities, quality of chronic care delivery, and wellbeing among patients with chronic obstructive pulmonary disease in The Netherlands

PubMed Central

Cramm, Jane Murray; Nieboer, Anna Petra

2013-01-01

Background This cross-sectional study aimed to identify the relationship between quality of chronic care delivery, self-management abilities, and wellbeing among patients with chronic obstructive pulmonary disease (COPD). Methods The study was conducted in 2012 and included 548 (out of 1303; 42% response rate) patients with COPD enrolled in a COPD care program in the region of Noord-Kennemerland in The Netherlands. We employed a multilevel random-effects model (548 patients nested in 47 healthcare practices) to investigate the relationship between quality of chronic care delivery, self-management abilities, and patients’ wellbeing. In the multilevel analyses we controlled for patients’ background characteristics and health behaviors. Results Multilevel analyses clearly showed a significant relationship between quality of chronic care delivery and wellbeing of patients with COPD (P ≤ 0.001). When self-management abilities were included in the equation while controlling for background characteristics, health behaviors, and quality of chronic care delivery, these abilities were found to have a strong positive relationship with patients’ wellbeing (P ≤ 0.001). Low educational level, single marital status, and physical exercise were not significantly associated with wellbeing when self-management abilities were included in the equation. Conclusion Self-management abilities and the quality of chronic care delivery are important for the wellbeing of patients with COPD. Furthermore, self-management abilities acted as mediators between wellbeing and low educational level, single status, and physical exercise among these patients. PMID:23641152

Optimization of light quality from color mixing light-emitting diode systems for general lighting

NASA Astrophysics Data System (ADS)

Thorseth, Anders

2012-03-01

Given the problem of metamerisms inherent in color mixing in light-emitting diode (LED) systems with more than three distinct colors, a method for optimizing the spectral output of multicolor LED system with regards to standardized light quality parameters has been developed. The composite spectral power distribution from the LEDs are simulated using spectral radiometric measurements of single commercially available LEDs for varying input power, to account for the efficiency droop and other non-linear effects in electrical power vs. light output. The method uses electrical input powers as input parameters in a randomized steepest decent optimization. The resulting spectral power distributions are evaluated with regard to the light quality using the standard characteristics: CIE color rendering index, correlated color temperature and chromaticity distance. The results indicate Pareto optimal boundaries for each system, mapping the capabilities of the simulated lighting systems with regard to the light quality characteristics.

Nonmaternal Care’s Association With Mother’s Parenting Sensitivity: A Case of Self-Selection Bias?

PubMed Central

Nomaguchi, Kei M.; DeMaris, Alfred

2013-01-01

Although attachment theory posits that the use of nonmaternal care undermines quality of mothers’ parenting, empirical evidence for this link is inconclusive. Using data from the National Institute of Child Health and Human Development Study of Early Child Care and Youth Development (N = 1,233), the authors examined the associations between nonmaternal care characteristics and maternal sensitivity during the first 3 years of children’s lives, with special attention to selection effects and moderation by resource levels. Findings from fixed-effects regression models suggested that, on average, there is little relationship between nonmaternal care characteristics and maternal sensitivity, once selection factors are held constant. Some evidence of moderation effects was found, however. Excellent-quality care is related to more sensitivity for mothers with lower family income. Poor-quality care is related to lower sensitivity for single mothers, but not partnered mothers. In sum, nonmaternal care characteristics do not seem to have as much influence on mothers’ parenting as attachment theory claims. PMID:23772093

Single dose systemic acetaminophen to improve patient reported quality of recovery after ambulatory segmental mastectomy: A prospective, randomized, double-blinded, placebo controlled, clinical trial.

PubMed

De Oliveira, Gildasio S; Rodes, Meghan E; Bialek, Jane; Kendall, Mark C; McCarthy, Robert J

2017-11-15

Few systemic drug interventions are efficacious to improve patient reported quality of recovery after ambulatory surgery. We aimed to evaluate whether a single dose systemic acetaminophen improve quality of recovery in female patients undergoing ambulatory breast surgery. We hypothesized that patients receiving a single dose systemic acetaminophen at the end of the surgical procedure would have a better global quality of postsurgical recovery compared to the ones receiving saline. The study was a prospective randomized double blinded, placebo controlled, clinical trial. Healthy female subjects were randomized to receive 1 g single dose systemic acetaminophen at the end of the surgery or the same volume of saline. The primary outcome was the Quality of Recovery 40 (QOR-40) questionnaire at 24 hours after surgery. Other data collected included opioid consumption and pain scores. Data were analyzed using group t tests and the Wilcoxon exact test. The association between opioid consumption and quality of recovery was evaluated using Spearman rho. P < .05 was used to reject the null hypothesis for the primary outcome. Seventy subjects were randomized and sixty-five completed the study. Patients' baseline characteristics and surgical factors were similar between the study groups. There was a clinically significant difference in the global QoR-40 scores between the acetaminophen and the saline groups, median (IQR) of 189 (183 to 194) and 183 (175 to 190), respectively, P = .01. In addition, there was an inverse relationship (Spearman's rho= -0.33) between oral opioid consumption at home (oral morphine equivalents) and 24 hour postoperative quality of recovery, P = .007. A single dose of systemic acetaminophen improves patient reported quality of recovery after ambulatory breast surgery. The use of systemic acetaminophen is an efficacious strategy to improve patient perceived quality of postsurgical recovery and analgesic outcomes after hospital discharge for ambulatory breast surgery. © 2017 Wiley Periodicals, Inc.

Single-Incision Multiport/Single Port Laparoscopic Abdominal Surgery (SILAP): A Prospective Multicenter Observational Quality Study.

PubMed

Mantke, Rene; Diener, Markus; Kropf, Siegfried; Otto, Ronny; Manger, Thomas; Vestweber, Boris; Mirow, Lutz; Winde, Günther; Lippert, Hans

2016-09-07

Increasing experience with minimally invasive surgery and the development of new instruments has resulted in a tendency toward reducing the number of abdominal skin incisions. Retrospective and randomized prospective studies could show the feasibility of single-incision surgery without any increased risk to the patient. However, large prospective multicenter observational datasets do not currently exist. This prospective multicenter observational quality study will provide a relevant dataset reflecting the feasibility and safety of single-incision surgery. This study focuses on external validity, clinical relevance, and the patients' perspective. Accordingly, the single-incision multiport/single port laparoscopic abdominal surgery (SILAP) study will supplement the existing evidence, which does not currently allow evidence-based surgical decision making. The SILAP study is an international prospective multicenter observational quality study. Mortality, morbidity, complications during surgery, complications postoperatively, patient characteristics, and technical aspects will be monitored. We expect more than 100 surgical centers to participate with 5000 patients with abdominal single-incision surgery during the study period. Funding was obtained in 2012. Enrollment began on January 01, 2013, and will be completed on December 31, 2018. As of January 2016, 2119 patients have been included, 106 German centers are registered, and 27 centers are very active (>5 patients per year). This prospective multicenter observational quality study will provide a relevant dataset reflecting the feasibility and safety of single-incision surgery. An international enlargement and recruitment of centers outside of Germany is meaningful. German Clinical Trials Register: DRKS00004594; https://drks-neu.uniklinik-freiburg.de/drks_web/navigate.do?navigationId=trial.HTML&TRIAL_ID=DRKS00004594 (Archived by WebCite at http://www.webcitation.org/6jK6ZVyUs).

Wheat grain quality under enhanced tropospheric CO{sub 2} and O{sub 3} concentrations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rudorff, B.F.T.; Mulchi, C.L.; Fenny, P.

It is expected that the progressive increase of tropospheric trace gases such as CO{sub 2} and O{sub 3} will have a significant impact on agricultural production. The single and combined effects of CO{sub 2} enrichment and tropospheric O{sub 3} on grain quality characteristics in soft red winter wheat (Triticum aestivum L.) were examined in field studies using 3 m in diam. open-top chambers. Wheat cultivars {open_quotes}Massey{close_quotes} (1991) and {open_quotes}Saluda{close_quotes} (1992) were exposed to two CO{sub 2} concentrations (350 vs. 500 {mu}mol CO{sub 2} mol{sup {minus}1}; 12 h d{sup {minus}1}) in combination with two O{sub 3} regimes (charcoal-filtered air vs. ambientmore » air + 40 {plus_minus} 20 nmol O{sub 3} mol{sup {minus}1}, 7 h d{sup {minus}1}; Monday to Friday) from late March until maturity in June. Grain quality characteristics investigated included: test weight, milling and baking quality, flour yield, protein content, softness equivalent, alkaline water retention capacity, and cookie diameter. In general, exposure of plants to either elevated CO{sub 2} or weekly chronic O{sub 3} episodes caused only small changes in grain quality. Milling and baking quality score were not significantly changed in response to treatments in both years. Flour yield was increased by elevated CO{sub 2} but this increase was counteracted when elevated CO{sub 2} was combined with chronic O{sub 3} exposure. Flour protein contents were increased by enhanced O{sub 3} under elevated CO{sub 2}. Although the single effect of either CO{sub 2} enrichment or chronic O{sub 3} exposure had some impact o grain quality characteristics, it was noted that the combined effect of these gases was minor. It is likely that the concomitant increase of CO{sub 2} and O{sub 3} in the troposphere will have no significant impact on wheat grain quality. 25 refs., 1 fig., 2 tabs.« less

Multiple Generations on Video Tape Recorders.

ERIC Educational Resources Information Center

Wiens, Jacob H.

Helical scan video tape recorders were tested for their dubbing characteristics in order to make selection data available to media personnel. The equipment, two recorders of each type tested, was submitted by the manufacturers. The test was designed to produce quality evaluations for three generations of a single tape, thereby encompassing all…

Minor Anomalies and Behavior in Different Home Environments.

ERIC Educational Resources Information Center

LaVeck, Beverly; And Others

This study presents research findings of a four year study intended to identify infant and family characteristics which, singly or in combination, predict developmental problems during preschool and school years. Predictors included a variety of measures of parental and neonatal biological conditions as well as measures of the quality of the…

Experimental Investigation of two-phase nitrogen Cryo transfer line

NASA Astrophysics Data System (ADS)

Singh, G. K.; Nimavat, H.; Panchal, R.; Garg, A.; Srikanth, GLN; Patel, K.; Shah, P.; Tanna, V. L.; Pradhan, S.

2017-02-01

A 6-m long liquid nitrogen based cryo transfer line has been designed, developed and tested at IPR. The test objectives include the thermo-hydraulic characteristics of Cryo transfer line under single phase as well as two phase flow conditions. It is always easy in experimentation to investigate the thermo-hydraulic parameters in case of single phase flow of cryogen but it is real challenge when one deals with the two phase flow of cryogen due to availibity of mass flow measurements (direct) under two phase flow conditions. Established models have been reported in the literature where one of the well-known model of Lockhart-Martenelli relationship has been used to determine the value of quality at the outlet of Cryo transfer line. Under homogenous flow conditions, by taking the ratio of the single-phase pressure drop and the two-phase pressure drop, we estimated the quality at the outlet. Based on these equations, vapor quality at the outlet of the transfer line was predicted at different heat loads. Experimental rresults shown that from inlet to outlet, there is a considerable increment in the pressure drop and vapour quality of the outlet depending upon heat load and mass flow rate of nitrogen flowing through the line.

Computerized stratified random site-selection approaches for design of a ground-water-quality sampling network

USGS Publications Warehouse

Scott, J.C.

1990-01-01

Computer software was written to randomly select sites for a ground-water-quality sampling network. The software uses digital cartographic techniques and subroutines from a proprietary geographic information system. The report presents the approaches, computer software, and sample applications. It is often desirable to collect ground-water-quality samples from various areas in a study region that have different values of a spatial characteristic, such as land-use or hydrogeologic setting. A stratified network can be used for testing hypotheses about relations between spatial characteristics and water quality, or for calculating statistical descriptions of water-quality data that account for variations that correspond to the spatial characteristic. In the software described, a study region is subdivided into areal subsets that have a common spatial characteristic to stratify the population into several categories from which sampling sites are selected. Different numbers of sites may be selected from each category of areal subsets. A population of potential sampling sites may be defined by either specifying a fixed population of existing sites, or by preparing an equally spaced population of potential sites. In either case, each site is identified with a single category, depending on the value of the spatial characteristic of the areal subset in which the site is located. Sites are selected from one category at a time. One of two approaches may be used to select sites. Sites may be selected randomly, or the areal subsets in the category can be grouped into cells and sites selected randomly from each cell.

New insight into the comparative power of quality-control rules that use control observations within a single analytical run.

PubMed

Parvin, C A

1993-03-01

The error detection characteristics of quality-control (QC) rules that use control observations within a single analytical run are investigated. Unlike the evaluation of QC rules that span multiple analytical runs, most of the fundamental results regarding the performance of QC rules applied within a single analytical run can be obtained from statistical theory, without the need for simulation studies. The case of two control observations per run is investigated for ease of graphical display, but the conclusions can be extended to more than two control observations per run. Results are summarized in a graphical format that offers many interesting insights into the relations among the various QC rules. The graphs provide heuristic support to the theoretical conclusions that no QC rule is best under all error conditions, but the multirule that combines the mean rule and a within-run standard deviation rule offers an attractive compromise.

Housing Satisfaction of Older (55+) Single-Person Householders in U.S. Rural Communities.

PubMed

Ahn, Mira; Lee, Sung-Jin

2016-08-01

This study aims to understand the housing satisfaction of older (55+) single-person householders in U.S. rural communities using the available variables from a secondary data set, the 2011 American Housing Survey (AHS). In this study, housing satisfaction was considered to be an indicator of quality of life. Based on previous studies, we developed a model to test a hypothesized relationship between older (55+) single-person householders' (N = 1,017) housing satisfaction and their personal, physical, financial, and environmental characteristics. Multiple regression results showed that the model was supported, indicating that significant variables in housing satisfaction include age, gender, health status, age of house, structure type, and unit location. Among the significant variables, health status was revealed to be the strongest factor in housing satisfaction. Housing satisfaction was discussed as potential indicators of quality of life. © The Author(s) 2015.

XPS Protocol for the Characterization of Pristine and Functionalized Single Wall Carbon Nanotubes

NASA Technical Reports Server (NTRS)

Sosa, E. D.; Allada, R.; Huffman, C. B.; Arepalli, S.

2009-01-01

Recent interest in developing new applications for carbon nanotubes (CNT) has fueled the need to use accurate macroscopic and nanoscopic techniques to characterize and understand their chemistry. X-ray photoelectron spectroscopy (XPS) has proved to be a useful analytical tool for nanoscale surface characterization of materials including carbon nanotubes. Recent nanotechnology research at NASA Johnson Space Center (NASA-JSC) helped to establish a characterization protocol for quality assessment for single wall carbon nanotubes (SWCNTs). Here, a review of some of the major factors of the XPS technique that can influence the quality of analytical data, suggestions for methods to maximize the quality of data obtained by XPS, and the development of a protocol for XPS characterization as a complementary technique for analyzing the purity and surface characteristics of SWCNTs is presented. The XPS protocol is then applied to a number of experiments including impurity analysis and the study of chemical modifications for SWCNTs.

Exploring the Predisposition of the Asian Eye to Development of Dry Eye.

PubMed

Craig, Jennifer P; Wang, Michael T M; Kim, Dabin; Lee, Jung Min

2016-07-01

To investigate the influence of eyelid shape on tear film quality, ocular surface characteristics and dry eye symptomatology by comparing Asian and Caucasian populations. Seventy-four age-matched participants were recruited in a cross-sectional study. Participants were classified into Asian single lid (ASL), Asian double lid (ADL), and Caucasian double lid (CDL) groups. Dry eye symptomatology, ocular surface characteristics, and tear film quality were evaluated in a single clinical session. Meibomian gland dropout was significantly greater in both the ASL and ADL groups than in the CDL group (all P<.05). A greater proportion of ASL and ADL participants exhibited incomplete blinking than CDL patients (all P<.05). There were no significant differences in tear film quality and dry eye symptomatology between the three groups (all P>.05). Exposed ocular surface area, lissamine green staining, and lid wiper epitheliopathy were significantly greater in the ADL group compared to the CDL group (all P<.05). The CDL group displayed significantly greater anterior blepharitis and lid telangiectasia grades compared to both ASL and ADL groups (all P<.05). A higher degree of meibomian gland dropout and incomplete blinking was observed in both Asian groups compared to the Caucasian group, potentially predisposing these groups to dry eye. Copyright © 2016 Elsevier Inc. All rights reserved.

Effects of kimchi and smoking on quality characteristics and shelf life of cooked sausages prepared with irradiated pork.

PubMed

Kim, Hyun-Wook; Choi, Ji-Hun; Choi, Yun-Sang; Kim, Hack-Youn; Lee, Mi-Ai; Hwang, Ko-Eun; Song, Dong-Heon; Lee, Ju-Woon; Kim, Cheon-Jei

2014-01-01

The combined effects of kimchi powder (KP) and smoking (SM) on the quality characteristics and shelf life of cooked sausage prepared with 10 kGy irradiated pork (IP) were studied. The cooked sausages were formulated with single or combined treatment of 0.5% KP and SM (70°C for 30 min). IP+KP+SM treatment showed increased redness, hardness, gumminess, and chewiness, but decreased cooking yield. As for sensory evaluation, treatment with both KP and SM was effective to mask the radiolytic off-flavor. Moreover, the cooked sausage treated with both KP and SM had the highest color, flavor, and overall acceptance (P<0.05), where the differences of flavor patterns were verified by using an electronic nose. During chilled storage for 4 weeks, the combined treatment is effective to retard lipid oxidation, formation of volatile compound, and total microbial number due to the addition of KP. Therefore, usages of KP and SM can provide improved quality characteristics and shelf life of cooked sausage prepared with IP. © 2013.

Content Analysis of Papers Submitted to "Communications in Information Literacy," 2007-2013

ERIC Educational Resources Information Center

Hollister, Christopher V.

2014-01-01

The author conducted a content analysis of papers submitted to the journal, "Communications in Information Literacy," from the years 2007-2013. The purpose was to investigate and report on the overall quality characteristics of a statistically significant sample of papers submitted to a single-topic, open access, library and information…

The Origins of Better Jobs Better Care

ERIC Educational Resources Information Center

Stone, Robyn I.; Dawson, Steven L.

2008-01-01

Better Jobs Better Care was the nation's largest single initiative created to reduce the high vacancy and turnover rates of direct care workers and improve workforce quality through both policy and practice changes. In this article, we describe the important role and key characteristics of direct care workers, what motivated the unique partnership…

Effects of augmentative and alternative communication on challenging behavior: a meta-analysis.

PubMed

Walker, Virginia L; Snell, Martha E

2013-06-01

The purposes of this review were to (a) use meta-analytic procedures to examine the effectiveness of single-case AAC intervention research on challenging behaviors exhibited by individuals with disabilities, (b) identify study characteristics that moderate intervention effects, and (c) evaluate the quality of research. The authors provided inferential and descriptive analyses of 54 studies representing 111 participants and estimated effect sizes using the Nonoverlap of All Pairs (NAP) method. Overall, AAC interventions were found to be equally effective across a broad spectrum of participants and interventions. AAC interventions were more effective with younger children than with adults. Interventions in which functional behavior assessments (FBA) were used had significantly larger effect sizes than those that did not use FBAs. Further, functional communication training interventions resulted in larger effect sizes than Picture Exchange Communication System interventions. Descriptive analysis revealed that (a) interventions often occurred in atypical environments (e.g., therapy room, experimental room) and with atypical interventionists (e.g., therapists, researchers), and (b) numerous studies did not exhibit quality characteristics of single-case research.

The influence of different electrical conductivity values in a simplified recirculating soilless system on inner and outer fruit quality characteristics of tomato.

PubMed

Krauss, Sandra; Schnitzler, Wilfried H; Grassmann, Johanna; Woitke, Markus

2006-01-25

Irrigation with saline water affects tomato fruit quality. While total fruit yield decreases with salinity, inner quality characterized by taste and health-promoting compounds can be improved. For a detailed description of this relationship, the influence of three different salt levels [electrical conductivity (EC) 3, 6.5, and 10] in hydroponically grown tomatoes was investigated. Rising salinity levels in the nutrient solution significantly increased vitamin C, lycopene, and beta-carotene in fresh fruits up to 35%. The phenol concentration was tendentiously enhanced, and the antioxidative capacity of phenols and carotenoids increased on a fresh weight basis. Additionally, the higher EC values caused an increase of total soluble solids and organic acids, parameters determining the taste of tomatoes. Total fruit yield, single fruit weight, and firmness significantly decreased with rising EC levels. Regression analyses revealed significant correlations between the EC level and the dependent variables single fruit weight, total soluble solids, titrable acids, lycopene, and antioxidative capacities of carotenoids and phenols, whereas vitamin C and phenols correlated best with truss number, and beta-carotene correlated best with temperature. Only pressure firmness showed no correlation with any of the measured parameters. As all desirable characteristics in the freshly produced tomato increased when exposed to salinity, salinity itself constitutes an alternative method of quality improvement. Moreover, it can compensate for the loss of yield by the higher inner quality due to changing demands by the market and the consumer. This investigation is to our knowledge the first comprehensive overview regarding parameters of outer quality (yield and firmness), taste (total soluble solids and acids), nutritional value (vitamin C, carotenoids, and phenolics), as well as antioxidative capacity in tomatoes grown under saline conditions.

Characteristics of epitaxial garnets grown by CVD using single metal alloy sources. [Chemical Vapor Deposition

NASA Technical Reports Server (NTRS)

Besser, P. J.; Hamilton, T. N.; Mee, J. E.; Stermer, R. L.

1974-01-01

Single metal alloys have been explored as the cation source in the chemical vapor deposition (CVD) of iron garnets. Growth of good quality single crystal garnet films containing as many as five different cations has been achieved over a wide range of deposition conditions. The relationship of film composition to alloy compositions and deposition conditions has been determined for several materials. By proper choice of the alloy composition and the deposition conditions, uncrazed deposits were grown on (111) gadolinium gallium garnet (GGG) substrates. Data on physical, magnetic and optical properties of representative films is presented and discussed.

Fast measurement of proton exchange membrane fuel cell impedance based on pseudo-random binary sequence perturbation signals and continuous wavelet transform

NASA Astrophysics Data System (ADS)

Debenjak, Andrej; Boškoski, Pavle; Musizza, Bojan; Petrovčič, Janko; Juričić, Đani

2014-05-01

This paper proposes an approach to the estimation of PEM fuel cell impedance by utilizing pseudo-random binary sequence as a perturbation signal and continuous wavelet transform with Morlet mother wavelet. With the approach, the impedance characteristic in the frequency band from 0.1 Hz to 500 Hz is identified in 60 seconds, approximately five times faster compared to the conventional single-sine approach. The proposed approach was experimentally evaluated on a single PEM fuel cell of a larger fuel cell stack. The quality of the results remains at the same level compared to the single-sine approach.

Towards tracer dose reduction in PET studies: Simulation of dose reduction by retrospective randomized undersampling of list-mode data.

PubMed

Gatidis, Sergios; Würslin, Christian; Seith, Ferdinand; Schäfer, Jürgen F; la Fougère, Christian; Nikolaou, Konstantin; Schwenzer, Nina F; Schmidt, Holger

2016-01-01

Optimization of tracer dose regimes in positron emission tomography (PET) imaging is a trade-off between diagnostic image quality and radiation exposure. The challenge lies in defining minimal tracer doses that still result in sufficient diagnostic image quality. In order to find such minimal doses, it would be useful to simulate tracer dose reduction as this would enable to study the effects of tracer dose reduction on image quality in single patients without repeated injections of different amounts of tracer. The aim of our study was to introduce and validate a method for simulation of low-dose PET images enabling direct comparison of different tracer doses in single patients and under constant influencing factors. (18)F-fluoride PET data were acquired on a combined PET/magnetic resonance imaging (MRI) scanner. PET data were stored together with the temporal information of the occurrence of single events (list-mode format). A predefined proportion of PET events were then randomly deleted resulting in undersampled PET data. These data sets were subsequently reconstructed resulting in simulated low-dose PET images (retrospective undersampling of list-mode data). This approach was validated in phantom experiments by visual inspection and by comparison of PET quality metrics contrast recovery coefficient (CRC), background-variability (BV) and signal-to-noise ratio (SNR) of measured and simulated PET images for different activity concentrations. In addition, reduced-dose PET images of a clinical (18)F-FDG PET dataset were simulated using the proposed approach. (18)F-PET image quality degraded with decreasing activity concentrations with comparable visual image characteristics in measured and in corresponding simulated PET images. This result was confirmed by quantification of image quality metrics. CRC, SNR and BV showed concordant behavior with decreasing activity concentrations for measured and for corresponding simulated PET images. Simulation of dose-reduced datasets based on clinical (18)F-FDG PET data demonstrated the clinical applicability of the proposed data. Simulation of PET tracer dose reduction is possible with retrospective undersampling of list-mode data. Resulting simulated low-dose images have equivalent characteristics with PET images actually measured at lower doses and can be used to derive optimal tracer dose regimes.

Geometrical quality evaluation in laser cutting of Inconel-718 sheet by using Taguchi based regression analysis and particle swarm optimization

NASA Astrophysics Data System (ADS)

Shrivastava, Prashant Kumar; Pandey, Arun Kumar

2018-03-01

The Inconel-718 is one of the most demanding advanced engineering materials because of its superior quality. The conventional machining techniques are facing many problems to cut intricate profiles on these materials due to its minimum thermal conductivity, minimum elastic property and maximum chemical affinity at magnified temperature. The laser beam cutting is one of the advanced cutting method that may be used to achieve the geometrical accuracy with more precision by the suitable management of input process parameters. In this research work, the experimental investigation during the pulsed Nd:YAG laser cutting of Inconel-718 has been carried out. The experiments have been conducted by using the well planned orthogonal array L27. The experimentally measured values of different quality characteristics have been used for developing the second order regression models of bottom kerf deviation (KD), bottom kerf width (KW) and kerf taper (KT). The developed models of different quality characteristics have been utilized as a quality function for single-objective optimization by using particle swarm optimization (PSO) method. The optimum results obtained by the proposed hybrid methodology have been compared with experimental results. The comparison of optimized results with the experimental results shows that an individual improvement of 75%, 12.67% and 33.70% in bottom kerf deviation, bottom kerf width, and kerf taper has been observed. The parametric effects of different most significant input process parameters on quality characteristics have also been discussed.

Acoustic characteristics of voice after severe traumatic brain injury.

PubMed

McHenry, M

2000-07-01

To describe the acoustic characteristics of voice in individuals with motor speech disorders after traumatic brain injury (TBI). Prospective study of 100 individuals with TBI based on consecutive referrals for motor speech evaluations. Subjects were audio tape-recorded while producing sustained vowels and single word and sentence intelligibility tests. Laryngeal airway resistance was estimated, and voice quality was rated perceptually. None of the subjects evidenced vocal parameters within normal limits. The most frequently occurring abnormal parameter across subjects was amplitude perturbation, followed by voice turbulence index. Twenty-three percent of subjects evidenced deviation in all five parameters measured. The perceptual ratings of breathiness were significantly correlated with both the amplitude perturbation quotient and the noise-to-harmonics ratio. Vocal quality deviation is common in motor speech disorders after TBI and may impact intelligibility.

Gait Patterns in Twins with Cerebral Palsy: Similarities and Development over Time after Multilevel Surgery

ERIC Educational Resources Information Center

van Drongelen, Stefan; Dreher, Thomas; Heitzmann, Daniel W. W.; Wolf, Sebastian I.

2013-01-01

To examine gait patterns and gait quality, 7 twins with cerebral palsy were measured preoperatively and after surgical intervention. The aim was to study differences and/or similarities in gait between twins, the influence of personal characteristics and birth conditions, and to describe the development of gait over time after single event…

Conversion from non-orthogonally to orthogonally polarized optical single-sideband modulation using optically injected semiconductor lasers.

PubMed

Hung, Yu-Han; Tseng, Chin-Hao; Hwang, Sheng-Kwang

2018-06-01

This Letter investigates an optically injected semiconductor laser for conversion from non-orthogonally to orthogonally polarized optical single-sideband modulation. The underlying mechanism relies solely on nonlinear laser characteristics and, thus, only a typical semiconductor laser is required as the key conversion unit. This conversion can be achieved for a broadly tunable frequency range up to at least 65 GHz. After conversion, the microwave phase quality, including linewidth and phase noise, is mostly preserved, and simultaneous microwave amplification up to 23 dB is feasible.

EMC and power quality standards for 20-kHz power distribution

NASA Technical Reports Server (NTRS)

Hansen, Irving G.

1987-01-01

The Space Station Power Distribution System has been baselined as a sinusoidal single phase, 440 VRMS system. This system has certain unique characteristics directly affecting its application. In particular, existing systematic description and control documents were modified to reflect the high operating frequency. This paper will discuss amendments made on Mil STD 704 (Electrical Power Characteristics), and Mil STD 461-B (Electromagnetic Emission and Susceptibility Requirements for the Control of Electromagnetic Interference). In some cases these amendments reflect changes of several orders of magnitude. Implications and impacts of these changes are discussed.

Simulator study of flight characteristics of a large twin-fuselage cargo transport airplane during approach and landing

NASA Technical Reports Server (NTRS)

Grantham, W. D.; Deal, P. L.; Keyser, G. L., Jr.; Smith, P. M.

1983-01-01

A six degree-of-freedom, ground-based simulator study was conducted to evaluate the low speed flight characteristics of a twin fuselage cargo transport airplane and to compare these characteristics with those of a large, single fuselage (reference) transport configuration which was similar to the Lockheed C-5C airplane. The primary piloting task was the approach and landing. The results indicated that in order to achieve "acceptable' low speed handling qualities on the twin fuselage concept, considerable stability and control augmentation was required, and although the augmented airplane could be landed safely under adverse conditions, the roll performance of the aircraft had to be improved appreciably before the handling qualities were rated as being "satisfactory.' These ground-based simulation results indicated that a value of t sub phi = 30 (time required to bank 30 deg) less than 6 sec should result in "acceptable' roll response characteristics, and when t sub phi = 30 is less than 3.8 sec, "satisfactory' roll response should be attainable on such large and unusually configured aircraft as the subject twin fuselage cargo transport concept.

Effect of synthetic and natural water-absorbing soil amendments on photosynthesis characteristics and tuber nutritional quality of potato in a semi-arid region.

PubMed

Xu, Shengtao; Zhang, Lei; McLaughlin, Neil B; Mi, Junzhen; Chen, Qin; Liu, Jinghui

2016-02-01

The effect of water-absorbing soil amendments on photosynthesis characteristics and tuber nutritional quality was investigated in a field experiment in a semi-arid region in northern China in 2010-2012. Treatments included two synthetic water-absorbing amendments, potassium polyacrylate (PAA) and polyacrylamide (PAM), and one natural amendment, humic acid (HA), both as single amendments and compound amendments (HA combined with PAA or PAM), and a no amendment control. Soil amendments had a highly significant effect (P ≤ 0.01) on photosynthesis characteristics, dry biomass, crop root/shoot (R/S) ratio and tuber nutritional quality. They improved both dry biomass above ground and dry biomass underground in the whole growing season by 4.6-31.2 and 1.1-83.1% respectively in all three years. Crop R/S ratio was reduced in the early growing season by 2.0-29.4% and increased in the later growing season by 2.3-32.6%. Soil amendments improved leaf soil plant analysis development value, net photosynthesis rate, stomatal conductance and transpiration rate by 1.4-17.0, 5.1-45.9, 2.4-90.6 and 2.0-22.6% respectively and reduced intercellular CO2 concentration by 2.1-19.5% in all three years. Amendment treatment with PAM + HA always had the greatest effect on photosynthesis characteristics and tuber nutritional quality among all amendment treatments and thus merits further research. © 2015 Society of Chemical Industry.

Correlations between critical current density, j{sub c}, critical temperature, T{sub c}, and structural quality of Y{sub 1}B{sub 2}Cu{sub 3}O{sub 7-x} thin superconducting films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chrzanowski, J.; Xing, W.B.; Atlan, D.

1994-12-31

Correlations between critical current density (j{sub c}) critical temperature (T{sub c}) and the density of edge dislocations and nonuniform strain have been observed in YBCO thin films deposited by pulsed laser ablation on (001) LaAlO{sub 3} single crystals. Distinct maxima in j{sub c} as a function of the linewidths of the (00{ell}) Bragg reflections and as a function of the mosaic spread have been found in the epitaxial films. These maxima in j{sub c} indicate that the magnetic flux lines, in films of structural quality approaching that of single crystals, are insufficiently pinned which results in a decreased critical currentmore » density. T{sub c} increased monotonically with improving crystalline quality and approached a value characteristic of a pure single crystal. A strong correlation between j{sub c} and the density of edge dislocations N{sub D} was found. At the maximum of the critical current density the density of edge dislocations was estimated to be N{sub D}{approximately}1-2 x 10{sup 9}/cm{sup 2}.« less

Correlations between critical current density, j(sub c), critical temperature, T(sub c),and structural quality of Y1B2Cu3O(7-x) thin superconducting films

NASA Technical Reports Server (NTRS)

Chrzanowski, J.; Xing, W. B.; Atlan, D.; Irwin, J. C.; Heinrich, B.; Cragg, R. A.; Zhou, H.; Angus, V.; Habib, F.; Fife, A. A.

1995-01-01

Correlations between critical current density (j(sub c)) critical temperature (T(sub c)) and the density of edge dislocations and nonuniform strain have been observed in YBCO thin films deposited by pulsed laser ablation on (001) LaAlO3 single crystals. Distinct maxima in j(sub c) as a function of the linewidths of the (00 l) Bragg reflections and as a function of the mosaic spread have been found in the epitaxial films. These maxima in j(sub c) indicate that the magnetic flux lines, in films of structural quality approachingthat of single crystals, are insufficiently pinned which results in a decreased critical current density. T(sub c) increased monotonically with improving crystalline quality and approached a value characteristic of a pure single crystal. A strong correlation between j(sub c) and the density of edge dislocations ND was found. At the maximum of the critical current density the density of edge dislocations was estimated to be N(sub D) approximately 1-2 x 10(exp 9)/sq cm.

Rapid and visual detection of the main chemical compositions in maize seeds based on Raman hyperspectral imaging

NASA Astrophysics Data System (ADS)

Yang, Guiyan; Wang, Qingyan; Liu, Chen; Wang, Xiaobin; Fan, Shuxiang; Huang, Wenqian

2018-07-01

Rapid and visual detection of the chemical compositions of plant seeds is important but difficult for a traditional seed quality analysis system. In this study, a custom-designed line-scan Raman hyperspectral imaging system was applied for detecting and displaying the main chemical compositions in a heterogeneous maize seed. Raman hyperspectral images collected from the endosperm and embryo of maize seed were acquired and preprocessed by Savitzky-Golay (SG) filter and adaptive iteratively reweighted Penalized Least Squares (airPLS). Three varieties of maize seeds were analyzed, and the characteristics of the spectral and spatial information were extracted from each hyperspectral image. The Raman characteristic peaks, identified at 477, 1443, 1522, 1596 and 1654 cm-1 from 380 to 1800 cm-1 Raman spectra, were related to corn starch, mixture of oil and starch, zeaxanthin, lignin and oil in maize seeds, respectively. Each single-band image corresponding to the characteristic band characterized the spatial distribution of the chemical composition in a seed successfully. The embryo was distinguished from the endosperm by band operation of the single-band images at 477, 1443, and 1596 cm-1 for each variety. Results showed that Raman hyperspectral imaging system could be used for on-line quality control of maize seeds based on the rapid and visual detection of the chemical compositions in maize seeds.

Effect of flour particle size on microstructural, rheological and physico-sensory characteristics of bread and south Indian parotta.

PubMed

Sakhare, Suresh D; Inamdar, Aashitosh A; Soumya, C; Indrani, D; Rao, G Venkateswara

2014-12-01

Wheat flour fractioned by sieving into four different particle size fractions namely finer fractions (<75 and 75-118 μm), coarser fractions (118-150 and >150 μm) were analyzed for their chemical, rheological, bread & parotta making characteristics. The finer fractions had lower ash, higher dry gluten, damaged starch and sodium dodecysulphate (SDS)-sedimentation value than the coarser fractions. The flour from finer fractions gave bread with best sensory and textural attributes. The parottas from finer fractions showed significantly higher sensory scores for colour, texture, layers, mouthfeel and overall quality score than the coarser fractions. In the micrograph of finer flour fractions, higher number of loosened single starch granules than the aggregates of starch and protein matrix were seen as compared to coarser fractions. These studies indicate that the flour from the finer fractions produce higher quality bread, parotta owing to the presence of higher damaged starch content, quantity and quality of protein in these fractions than coarser fractions.

[Data supporting quality circle management of inpatient depression treatment].

PubMed

Brand, S; Härter, M; Sitta, P; van Calker, D; Menke, R; Heindl, A; Herold, K; Kudling, R; Luckhaus, C; Rupprecht, U; Sanner, Dirk; Schmitz, D; Schramm, E; Berger, M; Gaebel, W; Schneider, F

2005-07-01

Several quality assurance initiatives in health care have been undertaken during the past years. The next step consists of systematically combining single initiatives in order to built up a strategic quality management. In a German multicenter study, the quality of inpatient depression treatment was measured in ten psychiatric hospitals. Half of the hospitals received comparative feedback on their individual results in comparison to the other hospitals (bench marking). Those bench markings were used by each hospital as a statistic basis for in-house quality work, to improve the quality of depression treatment. According to hospital differences concerning procedure and outcome, different goals were chosen. There were also differences with respect to structural characteristics, strategies, and outcome. The feedback from participants about data-based quality circles in general and the availability of bench-marking data was positive. The necessity of carefully choosing quality circle members and professional moderation became obvious. Data-based quality circles including bench-marking have proven to be useful for quality management in inpatient depression care.

Multi-locus genotyping of bottom fermenting yeasts by single nucleotide polymorphisms indicative of brewing characteristics.

PubMed

Ikushima, Shigehito; Tateishi, Yoshiyuki; Kanai, Keiko; Shimada, Emiko; Tanaka, Misa; Ishiguro, Tatsuji; Mizutani, Satoru; Kobayashi, Osamu

2012-04-01

Yeast plays a capital role in brewing fermentation and has a direct impact on flavor and aroma. For the evaluation of competent brewing strains during quality control or development of novel strains it is standard practice to perform fermentation tests, which are costly and time-consuming. Here, we have categorized DNA markers which enable to distinguish and to screen brewing strains more efficiently than ever before. Sequence analysis at 289 loci in the genomes of six bottom fermenting Saccharomyces pastorianus strains revealed that 30 loci contained single nucleotide polymorphisms (SNPs). By determining the nucleotide sequences at the SNP-loci in 26 other S. pastorianus strains and 20 strains of the top fermenting yeast Saccharomyces cerevisiae, almost all these strains could be discriminated solely on the basis of the SNPs. By comparing the fermentative phenotypes of these strains we found that some DNA markers showed a strong association with brewing characteristics, such as the production of ethyl acetate and hydrogen sulphide (H2S). Therefore, the DNA markers we identified will facilitate quality control and the efficient development of brewing yeast strains. Copyright © 2011 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Space Shuttle Main Engine (SSME) LOX turbopump pump-end bearing analysis

NASA Technical Reports Server (NTRS)

1986-01-01

A simulation of the shaft/bearing system of the Space Shuttle Main Engine Liquid Oxygen turbopump was developed. The simulation model allows the thermal and mechanical characteristics to interact as a realistic simulation of the bearing operating characteristics. The model accounts for single and two phase coolant conditions, and includes the heat generation from bearing friction and fluid stirring. Using the simulation model, parametric analyses were performed on the 45 mm pump-end bearings to investigate the sensitivity of bearing characteristics to contact friction, axial preload, coolant flow rate, coolant inlet temperature and quality, heat transfer coefficients, outer race clearance and misalignment, and the effects of thermally isolating the outer race from the isolator.

Quality of life in schizophrenic patients: the influence of sociodemographic and clinical characteristics and satisfaction with social support.

PubMed

Guedes de Pinho, Lara Manuela; Pereira, Anabela Maria de Sousa; Chaves, Cláudia Margarida Correia Balula

2018-03-08

To evaluate the relationship of sociodemographic and clinical characteristics and satisfaction with social support with the quality of life of schizophrenic patients. This study included a sample of 268 participants. An interview was conducted to obtain sociodemographic and clinical data, supplemented with two assessment tools used to evaluate quality of life (World Health Organization Quality of Life instrument-Abbreviated version - WHOQOL-Bref) and satisfaction with social support (Social Support Satisfaction Scale - SSSS). Descriptive and inferential analyses were performed. Most individuals were male (63.4%), with a mean age of 45.4 years, single (85.4%), living with their family (62.3%) and unemployed (90.3%). As for clinical characteristics, most had the disease for less than 20 years (50.7%), and 55.6% had at least one hospitalization within the last 5 years. Being employed and having had no hospitalization within the last 5 years were positively correlated with one or more WHOQOL-Bref domains. The results of the variables intimacy (p<0.001) and satisfaction with friends (p<0.001) were independently related to the total WHOQOL-Bref score. Having a job, having had no hospitalization within the last 5 years and having greater satisfaction with social support are factors that positively influence quality of life among schizophrenics. It is therefore crucial that the psychosocial rehabilitation of patients with schizophrenia take these factors into account, increasing the support network, preventing relapses and promoting occupational activities.

Evidence-Based Design Features Improve Sleep Quality Among Psychiatric Inpatients.

PubMed

Pyrke, Ryan J L; McKinnon, Margaret C; McNeely, Heather E; Ahern, Catherine; Langstaff, Karen L; Bieling, Peter J

2017-10-01

The primary aim of the present study was to compare sleep characteristics pre- and post-move into a state-of-the-art mental health facility, which offered private sleeping quarters. Significant evidence points toward sleep disruption among psychiatric inpatients. It is unclear, however, how environmental factors (e.g., dorm-style rooms) impact sleep quality in this population. To assess sleep quality, a novel objective technology, actigraphy, was used before and after a facility move. Subjective daily interviews were also administered, along with the Horne-Ostberg Morningness-Eveningness Questionnaire and the Pittsburgh Sleep Quality Index. Actigraphy revealed significant improvements in objective sleep quality following the facility move. Interestingly, subjective report of sleep quality did not correlate with the objective measures. Circadian sleep type appeared to play a role in influencing subjective attitudes toward sleep quality. Built environment has a significant effect on the sleep quality of psychiatric inpatients. Given well-documented disruptions in sleep quality present among psychiatric patients undergoing hospitalization, design elements like single patient bedrooms are highly desirable.

The relationship of marital status and clinical characteristics in middle-aged and older patients with schizophrenia and depressive symptoms.

PubMed

Nyer, Maren; Kasckow, John; Fellows, Ian; Lawrence, Edith C; Golshan, Shah; Solorzano, Ellen; Zisook, Sidney

2010-08-01

This study examines the relationship of marital status to depression, positive and negative symptoms, quality of life, and suicidal ideation among 211 patients with schizophrenia-spectrum disorders and subsyndromal depressive symptoms. We hypothesized that single participants would have more severe symptomatology than married and cohabitating participants. Outpatients, age 40 or older, were diagnosed with schizophrenia or schizoaffective disorders using the MINI Structured Clinical Interview for DSM-IV Axis 1 Disorders. Participants exhibited a score of >8 on the Hamilton Rating Scale for Depression but did not meet criteria for a major depressive episode. Participants who were married or cohabitating had a later age of onset of first psychotic episode or hospitalization than those who were single (age, 29.35 vs 24.21). Married participants rated their quality of life higher than those who were single (mean Quality of Life Scale scores, 72.28 vs 53.87) and had less suicidal ideation than those who were divorced, widowed, or separated (7.4% vs 29.2%). In middle-aged and older individuals with schizophrenia or schizoaffective disorder and depressive symptoms, marriage appeared to enhance quality of life and protect against suicidal ideation. Efforts that focus on providing additional support for those who are experiencing divorce or separation could prove to be lifesaving for these individuals.

Methodological quality of meta-analyses of single-case experimental studies.

PubMed

Jamshidi, Laleh; Heyvaert, Mieke; Declercq, Lies; Fernández-Castilla, Belén; Ferron, John M; Moeyaert, Mariola; Beretvas, S Natasha; Onghena, Patrick; Van den Noortgate, Wim

2017-12-28

Methodological rigor is a fundamental factor in the validity and credibility of the results of a meta-analysis. Following an increasing interest in single-case experimental design (SCED) meta-analyses, the current study investigates the methodological quality of SCED meta-analyses. We assessed the methodological quality of 178 SCED meta-analyses published between 1985 and 2015 through the modified Revised-Assessment of Multiple Systematic Reviews (R-AMSTAR) checklist. The main finding of the current review is that the methodological quality of the SCED meta-analyses has increased over time, but is still low according to the R-AMSTAR checklist. A remarkable percentage of the studies (93.80% of the included SCED meta-analyses) did not even reach the midpoint score (22, on a scale of 0-44). The mean and median methodological quality scores were 15.57 and 16, respectively. Relatively high scores were observed for "providing the characteristics of the included studies" and "doing comprehensive literature search". The key areas of deficiency were "reporting an assessment of the likelihood of publication bias" and "using the methods appropriately to combine the findings of studies". Although the results of the current review reveal that the methodological quality of the SCED meta-analyses has increased over time, still more efforts are needed to improve their methodological quality. Copyright © 2017 Elsevier Ltd. All rights reserved.

PQScal (Power Quality Score Calculation for Distribution Systems with DER Integration)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Power Quality is of great importance to evaluate the “health” of a distribution system, especially when the distributed energy resource (DER) penetration becomes more significant. The individual components that make up power quality, such as voltage magnitude and unbalance, can be measured in simulations or in the field, however, a comprehensive method to incorporate all of these values into a single score doesn't exist. As a result, we propose a methodology to quantify the power quality health using the single number value, named as Power Quality Score (PQS). The PQS is dependent on six metrics that are developed based onmore » both components that directly impact power quality and those are often reference in the context of power quality. These six metrics are named as System Average Voltage Magnitude Violation Index (SAVMVI), System Average Voltage Fluctuation Index (SAVFI), System Average Voltage Unbalance Index (SAVUI), System Control Device Operation Index (SCDOI), System Reactive Power Demand Index (SRPDI) and System Energy Loss Index (SELI). This software tool, PQScal, is developed based on this novel PQS methodology. Besides of traditional distribution systems, PQScal can also measure the power quality for distribution systems with various DER penetrations. PQScal has been tested on two utility distribution feeders with distinct model characteristics and its effectiveness has been proved. In sum, PQScal can help utilities or other parties to measure the power quality of distribution systems with DER integration easily and effectively.« less

A new method for water quality assessment: by harmony degree equation.

PubMed

Zuo, Qiting; Han, Chunhui; Liu, Jing; Ma, Junxia

2018-02-22

Water quality assessment is an important basic work in the development, utilization, management, and protection of water resources, and also a prerequisite for water safety. In this paper, the harmony degree equation (HDE) was introduced into the research of water quality assessment, and a new method for water quality assessment was proposed according to the HDE: by harmony degree equation (WQA-HDE). First of all, the calculation steps and ideas of this method were described in detail, and then, this method with some other important methods of water quality assessment (single factor assessment method, mean-type comprehensive index assessment method, and multi-level gray correlation assessment method) were used to assess the water quality of the Shaying River (the largest tributary of the Huaihe in China). For this purpose, 2 years (2013-2014) dataset of nine water quality variables covering seven monitoring sites, and approximately 189 observations were used to compare and analyze the characteristics and advantages of the new method. The results showed that the calculation steps of WQA-HDE are similar to the comprehensive assessment method, and WQA-HDE is more operational comparing with the results of other water quality assessment methods. In addition, this new method shows good flexibility by setting the judgment criteria value HD 0 of water quality; when HD 0  = 0.8, the results are closer to reality, and more realistic and reliable. Particularly, when HD 0  = 1, the results of WQA-HDE are consistent with the single factor assessment method, both methods are subject to the most stringent "one vote veto" judgment condition. So, WQA-HDE is a composite method that combines the single factor assessment and comprehensive assessment. This research not only broadens the research field of theoretical method system of harmony theory but also promotes the unity of water quality assessment method and can be used for reference in other comprehensive assessment.

Transvaginal single-incision mesh reconstruction for recurrent or advanced anterior vaginal wall prolapse.

PubMed

Marschke, J; Hengst, L; Schwertner-Tiepelmann, N; Beilecke, K; Tunn, R

2015-05-01

Single-incision transvaginal mesh for reconstruction of Level I and II prolapses in women with recurrent or advanced prolapse. We evaluated functional, anatomical, sonomorphological and quality-of-life outcome. Data were collected retrospectively for preoperative parameters and at follow-up visits. Anatomical cure was assessed with vaginal examination using the ICS-POP-Q system; introital-ultrasound scan for postvoidal residual and description of mesh characteristics was performed. We applied a visual analogue scale (VAS) and the German Pelvic Floor Questionnaire to assess quality-of-life. Seventy women with cystocele (III: 61.3%/IV: 16%), all post-hysterectomy and in majority (81.4%) after previous cystocele repair, were operated using a single-incision transvaginal technique. Overall anatomical success rate was 95.7% with significant improvement in quality-of-life (p < 0.0001). Mesh erosion occurred in 5.7%, one patient presented symptomatic vaginal vault prolapse. Postvoidal residual declined significantly (58 vs. 2.9%). Sonographic mesh length was 55.7% of implanted mesh with a wide range of mesh position, but no signs of mesh dislocation. There was no de novo dyspareunia reported, one case of preoperative existing dyspareunia worsened. No severe adverse event was observed. We hereby present a trial of a high-risk group of patients requiring reconstruction of anterior and apical vaginal wall in mostly recurrent prolapse situation. Our data support the hypothesis of improved anatomical and functional results and less mesh shrinkage caused by the single-incision technique with fixation in sacrospinous ligament in combination with modification in mesh quality compared to former multi-incision techniques.

Beyond Clinical Case Studies in Psychoanalysis: A Review of Psychoanalytic Empirical Single Case Studies Published in ISI-Ranked Journals.

PubMed

Meganck, Reitske; Inslegers, Ruth; Krivzov, Juri; Notaerts, Liza

2017-01-01

Single case studies are at the origin of both theory development and research in the field of psychoanalysis and psychotherapy. While clinical case studies are the hallmark of psychoanalytic theory and practice, their scientific value has been strongly criticized. To address problems with the subjective bias of retrospective therapist reports and uncontrollability of clinical case studies, systematic approaches to investigate psychotherapy process and outcome at the level of the single case have been developed. Such empirical case studies are also able to bridge the famous gap between academic research and clinical practice as they provide clinically relevant insights into how psychotherapy works. This study presents a review of psychoanalytic empirical case studies published in ISI-ranked journals and maps the characteristics of the study, therapist, patient en therapies that are investigated. Empirical case studies increased in quantity and quality (amount of information and systematization) over time. While future studies could pay more attention to providing contextual information on therapist characteristics and informed consent considerations, the available literature provides a basis to conduct meta-studies of single cases and as such contribute to knowledge aggregation.

Beyond Clinical Case Studies in Psychoanalysis: A Review of Psychoanalytic Empirical Single Case Studies Published in ISI-Ranked Journals

PubMed Central

Meganck, Reitske; Inslegers, Ruth; Krivzov, Juri; Notaerts, Liza

2017-01-01

Single case studies are at the origin of both theory development and research in the field of psychoanalysis and psychotherapy. While clinical case studies are the hallmark of psychoanalytic theory and practice, their scientific value has been strongly criticized. To address problems with the subjective bias of retrospective therapist reports and uncontrollability of clinical case studies, systematic approaches to investigate psychotherapy process and outcome at the level of the single case have been developed. Such empirical case studies are also able to bridge the famous gap between academic research and clinical practice as they provide clinically relevant insights into how psychotherapy works. This study presents a review of psychoanalytic empirical case studies published in ISI-ranked journals and maps the characteristics of the study, therapist, patient en therapies that are investigated. Empirical case studies increased in quantity and quality (amount of information and systematization) over time. While future studies could pay more attention to providing contextual information on therapist characteristics and informed consent considerations, the available literature provides a basis to conduct meta-studies of single cases and as such contribute to knowledge aggregation. PMID:29046660

A simulation investigation of scout/attack helicopter directional control requirements for hover and low-speed tasks

NASA Technical Reports Server (NTRS)

Bivens, Courtland C.; Guercio, Joseph G.

1987-01-01

A piloted simulator experiment was conducted to investigate directional axis handling qualities requirements for low speed and hover tasks performed by a Scout/Attack helicopter. Included were the directional characteristics of various candidate light helicopter family configurations. Also, the experiment focused on conventional single main/tail rotor configurations of the OH-58 series aircraft, where the first-order yaw-axis dynamic effects that contributed to the loss of tail rotor control were modeled. Five pilots flew 22 configurations under various wind conditions. Cooper-Harper handling quality ratings were used as the primary measure of merit of each configuration. The results of the experiment indicate that rotorcraft configurations with high directional gust sensitivity require greater minimum yaw damping to maintain satisfactory handling qualities during nap-of-the-Earth flying tasks. It was also determined that both yaw damping and control response are critical handling qualities parameters in performing the air-to-air target acquisition and tracking task. Finally, the lack of substantial yaw damping and larger values of gust sensitivity increased the possibility of loss of directional control at low airspeeds for the single main/tail rotor configurations.

Handling Qualities Optimization for Rotorcraft Conceptual Design

NASA Technical Reports Server (NTRS)

Lawrence, Ben; Theodore, Colin R.; Berger, Tom

2016-01-01

Over the past decade, NASA, under a succession of rotary-wing programs has been moving towards coupling multiple discipline analyses in a rigorous consistent manner to evaluate rotorcraft conceptual designs. Handling qualities is one of the component analyses to be included in a future NASA Multidisciplinary Analysis and Optimization framework for conceptual design of VTOL aircraft. Similarly, the future vision for the capability of the Concept Design and Assessment Technology Area (CD&A-TA) of the U.S Army Aviation Development Directorate also includes a handling qualities component. SIMPLI-FLYD is a tool jointly developed by NASA and the U.S. Army to perform modeling and analysis for the assessment of flight dynamics and control aspects of the handling qualities of rotorcraft conceptual designs. An exploration of handling qualities analysis has been carried out using SIMPLI-FLYD in illustrative scenarios of a tiltrotor in forward flight and single-main rotor helicopter at hover. Using SIMPLI-FLYD and the conceptual design tool NDARC integrated into a single process, the effects of variations of design parameters such as tail or rotor size were evaluated in the form of margins to fixed- and rotary-wing handling qualities metrics as well as the vehicle empty weight. The handling qualities design margins are shown to vary across the flight envelope due to both changing flight dynamic and control characteristics and changing handling qualities specification requirements. The current SIMPLI-FLYD capability and future developments are discussed in the context of an overall rotorcraft conceptual design process.

High-Performance InGaAs/InP Composite-Channel High Electron Mobility Transistors Grown by Metal-Organic Vapor-Phase Epitaxy

NASA Astrophysics Data System (ADS)

Sugiyama, Hiroki; Kosugi, Toshihiko; Yokoyama, Haruki; Murata, Koichi; Yamane, Yasuro; Tokumitsu, Masami; Enoki, Takatomo

2008-04-01

This paper reports InGaAs/InP composite-channel (CC) high electron mobility transistors (HEMTs) grown by metal-organic vapor-phase epitaxy (MOVPE) with excellent breakdown and high-speed characteristics. Atomic force microscopy (AFM) reveals high-quality heterointerfaces between In(Ga,Al)As and In(Al)P. Fabricated 80-nm-gate CC HEMTs exhibit on- and off-state breakdown (burnout) voltages estimated at higher than 3 and 8 V. An excellent current-gain cutoff frequency ( fT) of 186 GHz is also obtained in the CC HEMTs. The on-wafer uniformity of CC-HEMT characteristics is comparable to those of our mature 100-nm-gate InGaAs single-channel HEMTs. Bias-stress aging tests reveals that the lifetime of CC HEMTs is expected to be comparable to that of our conventional InGaAs single-channel HEMTs.

High-power Broadband Organic THz Generator

PubMed Central

Jeong, Jae-Hyeok; Kang, Bong-Joo; Kim, Ji-Soo; Jazbinsek, Mojca; Lee, Seung-Heon; Lee, Seung-Chul; Baek, In-Hyung; Yun, Hoseop; Kim, Jongtaek; Lee, Yoon Sup; Lee, Jae-Hyeok; Kim, Jae-Ho; Rotermund, Fabian; Kwon, O-Pil

2013-01-01

The high-power broadband terahertz (THz) generator is an essential tool for a wide range of THz applications. Here, we present a novel highly efficient electro-optic quinolinium single crystal for THz wave generation. For obtaining intense and broadband THz waves by optical-to-THz frequency conversion, a quinolinium crystal was developed to fulfill all the requirements, which are in general extremely difficult to maintain simultaneously in a single medium, such as a large macroscopic electro-optic response and excellent crystal characteristics including a large crystal size with desired facets, good environmental stability, high optical quality, wide transparency range, and controllable crystal thickness. Compared to the benchmark inorganic and organic crystals, the new quinolinium crystal possesses excellent crystal properties and THz generation characteristics with broader THz spectral coverage and higher THz conversion efficiency at the technologically important pump wavelength of 800 nm. Therefore, the quinolinium crystal offers great potential for efficient and gap-free broadband THz wave generation. PMID:24220234

Edge Extraction by an Exponential Function Considering X-ray Transmission Characteristics

NASA Astrophysics Data System (ADS)

Kim, Jong Hyeong; Youp Synn, Sang; Cho, Sung Man; Jong Joo, Won

2011-04-01

3-D radiographic methodology has been into the spotlight for quality inspection of mass product or in-service inspection of aging product. To locate a target object in 3-D space, its characteristic contours such as edge length, edge angle, and vertices are very important. In spite of a simple geometry product, it is very difficult to get clear shape contours from a single radiographic image. The image contains scattering noise at the edges and ambiguity coming from X-Ray absorption within the body. This article suggests a concise method to extract whole edges from a single X-ray image. At the edge point of the object, the intensity of the X-ray decays exponentially as the X-ray penetrates the object. Considering this X-Ray decaying property, edges are extracted by using the least square fitting with the control of Coefficient of Determination.

High-power broadband organic THz generator.

PubMed

Jeong, Jae-Hyeok; Kang, Bong-Joo; Kim, Ji-Soo; Jazbinsek, Mojca; Lee, Seung-Heon; Lee, Seung-Chul; Baek, In-Hyung; Yun, Hoseop; Kim, Jongtaek; Lee, Yoon Sup; Lee, Jae-Hyeok; Kim, Jae-Ho; Rotermund, Fabian; Kwon, O-Pil

2013-11-13

The high-power broadband terahertz (THz) generator is an essential tool for a wide range of THz applications. Here, we present a novel highly efficient electro-optic quinolinium single crystal for THz wave generation. For obtaining intense and broadband THz waves by optical-to-THz frequency conversion, a quinolinium crystal was developed to fulfill all the requirements, which are in general extremely difficult to maintain simultaneously in a single medium, such as a large macroscopic electro-optic response and excellent crystal characteristics including a large crystal size with desired facets, good environmental stability, high optical quality, wide transparency range, and controllable crystal thickness. Compared to the benchmark inorganic and organic crystals, the new quinolinium crystal possesses excellent crystal properties and THz generation characteristics with broader THz spectral coverage and higher THz conversion efficiency at the technologically important pump wavelength of 800 nm. Therefore, the quinolinium crystal offers great potential for efficient and gap-free broadband THz wave generation.

A systematic review of training programs for parents of children with autism spectrum disorders: single subject contributions.

PubMed

Patterson, Stephanie Y; Smith, Veronica; Mirenda, Pat

2012-09-01

The purpose of this systematic review was to examine research utilizing single subject research designs (SSRD) to explore the effectiveness of interventions designed to increase parents' ability to support communication and social development in children with autism spectrum disorders (ASDs). Included studies were systematically assessed for methodological quality (Logan et al., 2008; Smith et al., 2007) and intervention effects. Data examining participant characteristics, study methodology, outcomes, and analysis were systematically extracted. Eleven SSRD parent-training intervention studies examining 44 participants with ASD were included. Overall, the studies were of moderate quality and reported increases in parent skills and child language and communication outcomes. The results supported by improvement rate difference (IRD) analysis indicated several interventions demonstrated positive effects for both parent and child outcomes. However, limited generalization and follow-up data suggested only one intervention demonstrated parents' accurate and ongoing intervention implementation beyond training.

A high-fidelity weather time series generator using the Markov Chain process on a piecewise level

NASA Astrophysics Data System (ADS)

Hersvik, K.; Endrerud, O.-E. V.

2017-12-01

A method is developed for generating a set of unique weather time-series based on an existing weather series. The method allows statistically valid weather variations to take place within repeated simulations of offshore operations. The numerous generated time series need to share the same statistical qualities as the original time series. Statistical qualities here refer mainly to the distribution of weather windows available for work, including durations and frequencies of such weather windows, and seasonal characteristics. The method is based on the Markov chain process. The core new development lies in how the Markov Process is used, specifically by joining small pieces of random length time series together rather than joining individual weather states, each from a single time step, which is a common solution found in the literature. This new Markov model shows favorable characteristics with respect to the requirements set forth and all aspects of the validation performed.

Full-range electrical characteristics of WS{sub 2} transistors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kumar, Jatinder; Bellus, Matthew Z.; Chiu, Hsin-Ying, E-mail: chiu@ku.edu

We fabricated transistors formed by few layers to bulk single crystal WS{sub 2} to quantify the factors governing charge transport. We established a capacitor network to analyze the full-range electrical characteristics of the channel, highlighting the role of quantum capacitance and interface trap density. We find that the transfer characteristics are mainly determined by the interplay between quantum and oxide capacitances. In the OFF-state, the interface trap density (<10{sup 12} cm{sup –2}) is a limiting factor for the subthreshold swing. Furthermore, the superior crystalline quality and the low interface trap density enabled the subthreshold swing to approach the theoretical limit onmore » a back-gated device on SiO{sub 2}/Si substrate.« less

[Study on physiological characteristics and effects of salt stress in Andrographis paniculata].

PubMed

Chen, Juan; Gu, Wei; Duan, Jin-Ao; Su, Shu-Lan; Shao, Jing; Geng, Chao

2014-08-01

To study the physiological characteristics and effects of salt stress in Andrographis paniculata. Andrographis paniculata was treated with NaCl of different concentration. The photosynthetic characteristics and transpiration rate were an- alyzed by LI-6400 Portable Photosynthesis System. The activities of enzymes were studied with kits. The net photosynthetic rate (Pn) and stomatal conductance (Gs) showed a diurnal variation of bimodal curve, the transpiration rate (Tr) and stomatal limitation (Ls) both had a single peak diurnal variation, while the intercellular CO2 concentration (Ci) and the water use efficiency (WUE) presented a single valley type of diurnal variation. With salt concentration rising, Pn, Tr, Ci, Ca and WUE decreased but L, increased, the activities of SOD, CAT and POD increased firstly and then decreased, while the MDA and proline content showed a rising trend. Andrographis paniculata is a type of sun plant. The net photosynthetic rate of Andrographis paniculata leaves has an obvious "midday depression" phenomenon. The results also indicate that Andrographis paniculata has a resistance to salt stress and appropriate shade is good for the quality improvement.

Study of structural and optical properties of YAG and Nd:YAG single crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kostić, S.; Lazarević, Z.Ž., E-mail: lzorica@yahoo.com; Radojević, V.

2015-03-15

Highlights: • Transparent YAG and pale pink Nd:YAG single crystals were produced by the Czochralski technique. • Growth mechanisms and shape of the liquid/solid interface and incorporation of Nd{sup 3+} were studied. • The structure of the crystals was investigated by X-ray diffraction, Raman and IR spectroscopy. • The 15 Raman and 17 IR modes were observed. • The obtained YAG and Nd:YAG single crystals were without core and of good optical quality. - Abstract: Yttrium aluminum garnet (YAG, Y{sub 3}Al{sub 5}O{sub 12}) and yttrium aluminum garnet doped with neodymium (Nd:YAG) single crystals were grown by the Czochralski technique. Themore » critical diameter and the critical rate of rotation were calculated. Suitable polishing and etching solutions were determined. As a result of our experiments, the transparent YAG and pale pink Nd:YAG single crystals were produced. The obtained crystals were studied by X-ray diffraction, Raman and IR spectroscopy. The crystal structure was confirmed by XRD. The 15 Raman and 17 IR modes were observed. The Raman and IR spectroscopy results are in accordance with X-ray diffraction analysis. The obtained YAG and Nd:YAG single crystals were without core and of good optical quality. The absence of a core was confirmed by viewing polished crystal slices. Also, it is important to emphasize that the obtained Nd:YAG single crystal has a concentration of 0.8 wt.% Nd{sup 3+} that is characteristic for laser materials.« less

Phase-contrast tomography of sciatic nerves: image quality and experimental parameters

NASA Astrophysics Data System (ADS)

Töpperwien, M.; Krenkel, M.; Ruhwedel, T.; Möbius, W.; Pacureanu, A.; Cloetens, P.; Salditt, T.

2017-06-01

We present propagation-based phase-contrast tomography of mouse sciatic nerves stained with osmium, leading to an enhanced contrast in the myelin sheath around the axons, in order to visualize the threedimensional (3D) structure of the nerve. We compare different experimental parameters and show that contrast and resolution are high enough to identify single axons in the nerve, including characteristic functional structures such as Schmidt-Lanterman incisures.

Simplified multiple scattering model for radiative transfer in turbid water

NASA Technical Reports Server (NTRS)

Ghovanlou, A. H.; Gupta, G. N.

1978-01-01

Quantitative analytical procedures for relating selected water quality parameters to the characteristics of the backscattered signals, measured by remote sensors, require the solution of the radiative transport equation in turbid media. Presented is an approximate closed form solution of this equation and based on this solution, the remote sensing of sediments is discussed. The results are compared with other standard closed form solutions such as quasi-single scattering approximations.

Optical properties of bulk gallium nitride single crystals grown by chloride-hydride vapor-phase epitaxy

NASA Astrophysics Data System (ADS)

Agyekyan, V. F.; Borisov, E. V.; Serov, A. Yu.; Filosofov, N. G.

2017-12-01

A gallium nitride crystal 5 mm in thickness was grown by chloride-hydride vapor-phase epitaxy on a sapphire substrate, from which the crystal separated during cooling. At an early stage, a three-dimensional growth mode was implemented, followed by a switch to a two-dimensional mode. Spectra of exciton reflection, exciton luminescence, and Raman scattering are studied in several regions characteristic of the sample. Analysis of these spectra and comparison with previously obtained data for thin epitaxial GaN layers with a wide range of silicon doping enabled conclusions about the quality of the crystal lattice in these characteristic regions.

Formulation of image quality prediction criteria for the Viking lander camera

NASA Technical Reports Server (NTRS)

Huck, F. O.; Jobson, D. J.; Taylor, E. J.; Wall, S. D.

1973-01-01

Image quality criteria are defined and mathematically formulated for the prediction computer program which is to be developed for the Viking lander imaging experiment. The general objective of broad-band (black and white) imagery to resolve small spatial details and slopes is formulated as the detectability of a right-circular cone with surface properties of the surrounding terrain. The general objective of narrow-band (color and near-infrared) imagery to observe spectral characteristics if formulated as the minimum detectable albedo variation. The general goal to encompass, but not exceed, the range of the scene radiance distribution within single, commandable, camera dynamic range setting is also considered.

Grain growth and significant Fe diffusion in polycrystalline ZnS at elevated temperatures and pressures

NASA Astrophysics Data System (ADS)

Gafarov, Ozarfar; Martyshkin, Dmitriy; Fedorov, Vladimir; Mirov, Sergey

2018-02-01

Middle-infrared (mid-IR) lasers enabling a wide range of scientific, medical, technological, and defense related applications continue to enjoy a strong demand. Transition metal (TM) doped II-VI chalcogenides are appealing mid-IR gain medial providing direct access to 1.8-6 μm spectral range. . II-VI chalcogenides are available in single crystal and in polycrystalline forms. With respect to single crystals, polycrystalline gain elements fabricated by postgrowth thermal diffusion of TM impurities in II-VI hosts feature better optical quality and enable superior laser characteristics. Despite significant progress in post-growth thermal diffusion technology, there are still some difficulties associated with the diffusion of certain TM ions in certain II-VI hosts. Specifically, the diffusion length Fe in ZnS during 1 month annealing at 950°C is of the order of 0.1 mm. In this work, enhancement of diffusion coefficient under Hot Isostatic Pressing, at temperature and pressure of 1350°C and 2000 atm, and effect of these extreme conditions on the overall optical quality of the crystal were studied. The high temperature was applied to increase the diffusion rate, and the high pressure was needed to suppress strong sublimation and sphalerite - wurtzite phase transition at elevated temperatures. Under these conditions, the diffusion coefficient Fe in ZnS was enhanced by 5500 times as compared to standard diffusion processes carried out at 950°C. It was also demonstrated that the grain size had grown from 30μm to 5.5mm, which is believed to be another reason for efficient diffusion besides the elevation of temperature. The XRD patterns were measured such that the X-ray beam falls on a single grain. The XRD patterns showed only peaks characteristic to single crystals with zinc blende structure. Lasing characterization was performed to investigate the optical quality of the crystal. Slope efficiencies of 23.2% and 15.4% were obtained for TM11 and TM00 modes of operation, respectively. The emission of the laser was demonstrated to be in the 3840-3920 nm.

Ultraviolet electroluminescence from hetero p-n junction between a single ZnO microsphere and p-GaN thin film.

PubMed

Tetsuyama, Norihiro; Fusazaki, Koshi; Mizokami, Yasuaki; Shimogaki, Tetsuya; Higashihata, Mitsuhiro; Nakamura, Daisuke; Okada, Tatsuo

2014-04-21

We report ultraviolet electroluminescence from a hetero p-n junction between a single ZnO microsphere and p-GaN thin film. ZnO microspheres, which have high crystalline quality, have been synthesized by ablating a ZnO sintered target. It was found that synthesized ZnO microspheres had a high-optical property and exhibit the laser action in the whispering gallery mode under pulsed optical pumping. A hetero p-n junction was formed between the single ZnO microsphere/ p-GaN thin film, and a good rectifying property with a turn-on voltage of approximately 6 V was observed in I-V characteristic across the junction. Ultraviolet and visible electroluminescence were observed under forward bias.

Nurse managers' conceptions of quality management as promoted by peer supervision.

PubMed

Hyrkäs, Kristiina; Koivula, Meeri; Lehti, Kristiina; Paunonen-Ilmonen, Marita

2003-01-01

The aim of the study was to describe nurse managers' conceptions of quality management in their work as promoted by peer supervision. Quality management is one of the topical issues in a nurse manager's demanding and changing work. As first-line managers, they have a key role in quality management which is seen to create the system and environment for high quality services and quality improvement. Despite the official recommendations and definitions of quality management, several published reports have shown that there is no single solution for quality management. Peer supervision or the support provided by it to nursing managers have rarely been a subject of study. This study was carried out at Tampere University Hospital between 1996 and 1998. The peer supervision intervention was organized once a month, 2 hours at a time and in closed supervisor-led groups of nine nurse managers. Data were collected by themed interviews. Fifteen nurse managers participated in the study. The data were analysed using the phenomenographic method. Two main categories were formed of nurse managers' conceptions. The first described supportive and reflective characteristics of peer supervision. This main category was described by horizontal, hierarchical categories of support from peer group and reflection. The second main category described nurse managers' conceptions of individual development of leadership during peer supervision. This main category was also described by three horizontal categories: personal growth, finding psychological resources and internalization of leadership. The finding of this study show that peer supervision benefited nurse managers in quality management through reflection and support. The reflective and supportive characteristics of peer supervision promoted the nurse managers' individual development, but also that of leadership. It can be concluded that peer supervision promotes quality management in nurse managers' work.

Classification of sea ice types with single-band (33.6 GHz) airborne passive microwave imagery

NASA Astrophysics Data System (ADS)

Eppler, Duane T.; Farmer, L. Dennis; Lohanick, Alan W.; Hoover, Mervyn

1986-09-01

During March 1983 extensive high-quality airborne passive Ka band (33.6 GHz) microwave imagery and coincident high-resolution aerial photography were obtained of ice along a 378-km flight line in the Beaufort Sea. Analysis of these data suggests that four classes of winter surfaces can be distinguished solely on the basis of 33.6-GHz brightness temperature: open water, frazil, old ice, and young/first-year ice. New ice (excluding frazil) and nilas display brightness temperatures that overlap the range of temperatures characteristic of old ice and, to a lesser extent, young/first-year ice. Scenes in which a new ice or nilas are present in appreciable amounts are subject to substantial errors in classification if static measures of Ka band radiometric brightness temperature alone are considered. Textural characteristics of nilas and new ice, however, differ significantly from textural features characteristic of other ice types and probably can be used with brightness temperature data to classify ice type in high-resolution single-band microwave images. In any case, open water is radiometrically the coldest surface observed in any scene. Lack of overlap between brightness temperatures characteristic of other surfaces indicates that estimates of the areal extent of open water based on only 33.6-GHz brightness temperatures are accurate.

The effect of the amiodarone-warfarin interaction on anticoagulation quality in a single, high-quality anticoagulation center.

PubMed

White, Ryan D; Riggs, Kyle W; Ege, Ed J; Petroski, Gregory F; Koerber, Scott M; Flaker, Greg

2016-03-01

Clinical trials have reported a low time in therapeutic range (TTR) in patients with atrial fibrillation treated with both warfarin andamiodarone. These trials included centers and countries with both high and low TTRs. What is the impact of amiodarone on the TTR in a single, high-quality anticoagulation clinic? TTR was assessed in amiodarone and nonamiodarone-treated patients from a University anticoagulation clinic. Baseline characteristics between patients ever-taking or never-taking amiodarone were similar, except more amiodarone patients were smokers (19.5 vs. 6.1%, P = 0.0031). The TTR calculated from 8901international normalized ratios (INRs) in 249 nonamiodarone patients with a mean follow-up of 34 ± 20 months (mean INR 36 ± 18) was 66 ± 16.6% compared with 61.3 ± 16.2% (P = 0.111) from 1455 INRs in 41 amiodarone-treated patients with a mean follow-up of 28 ± 20 months (mean INR 35 ± 22). Factors associated with a low TTR were male sex (P = 0.0013), smoker (P = 0.0048), and amiodarone use (P = 0.0374). A second on-treatment analysis, in which the TTR was calculated only during amiodarone therapy, resulted in similar findings; however, amiodarone did not emerge as a predictor of a low TTR. In 11 patients, the TTR prior to amiodarone (54.5 ± 22.2%) was not significantly different in the first 3 months (54.6 ± 33.4%) or after 3 months (67.2 ± 33.7%) of amiodarone. In a single high-quality anticoagulation center, anticoagulation quality, as measured by the TTR, can be comparable in amiodarone and nonamiodarone-treated patients.

A systematic and transparent approach for assessing the methodological quality of intervention effectiveness research: the Study Design and Implementation Assessment Device (Study DIAD).

PubMed

Valentine, Jeffrey C; Cooper, Harris

2008-06-01

Assessments of studies meant to evaluate the effectiveness of interventions, programs, and policies can serve an important role in the interpretation of research results. However, evidence suggests that available quality assessment tools have poor measurement characteristics and can lead to opposing conclusions when applied to the same body of studies. These tools tend to (a) be insufficiently operational, (b) rely on arbitrary post-hoc decision rules, and (c) result in a single number to represent a multidimensional construct. In response to these limitations, a multilevel and hierarchical instrument was developed in consultation with a wide range of methodological and statistical experts. The instrument focuses on the operational details of studies and results in a profile of scores instead of a single score to represent study quality. A pilot test suggested that satisfactory between-judge agreement can be obtained using well-trained raters working in naturalistic conditions. Limitations of the instrument are discussed, but these are inherent in making decisions about study quality given incomplete reporting and in the absence of strong, contextually based information about the effects of design flaws on study outcomes. (PsycINFO Database Record (c) 2008 APA, all rights reserved).

Health-related quality of life in women with breast cancer in Korea: do sociodemographic characteristics and time since diagnosis make a difference?

PubMed

Chae, Young Ran; Seo, Kumin

2010-07-01

To describe whether levels of health-related quality of life (HRQOL) differ by sociodemographic characteristics and time since breast cancer diagnosis in women in Korea. A descriptive, cross-sectional study of women with breast cancer. An outpatient clinic of one large hospital in Seoul, Republic of Korea. A convenience sample of 244 women with breast cancer after mastectomy. Study participants completed sociodemographic characteristics and HRQOL questionnaires. Medical charts were reviewed to determine time since breast cancer diagnosis. Sociodemographic characteristics (age, marital status, employment status, education, monthly household income, and religion), time since diagnosis, and HRQOL. The psychological well-being domain scored the lowest among domains of HRQOL. Women who are younger, married, unemployed, highly educated, or religious, with higher monthly household income or with greater than one year elapsed time since diagnosis, had higher HRQOL. Study findings will be useful to establish priorities in planning nursing interventions to enhance HRQOL in care of women with breast cancer. Nursing interventions can be provided to Korean women with breast cancer who are not religious, who are older, single or widowed, or employed, with lower education level, with lower monthly household income, or with one year or less elapsed time since breast cancer diagnosis.

Differences in health-related quality of life between European and Asian patients with hepatocellular carcinoma.

PubMed

Chie, Wei-Chu; Blazeby, Jane M; Hsiao, Chin-Fu; Chiu, Herng-Chia; Poon, Ronnie T; Mikoshiba, Naoko; Al-Kadhim, Gillian; Heaton, Nigel; Calara, Jozer; Collins, Peter; Caddick, Katharine; Costantini, Anna; Vilgrain, Valerie

2017-10-01

The aim of this study is to explore the possible effects of clinical and cultural characteristics of hepatocellular carcinoma on patients' health-related quality of life (HRQoL). Patients with hepatocellular carcinoma from Asian and European countries completed the EORTC QLQ-C30 and the EORTC QLQ-HCC18. Comparisons were made using Student's t-test and Wilcoxon rank-sum test with method of false discovery to correct multiple comparisons. Multiway analysis of variance and model selection were used to assess the effects of clinical characteristics and geographic areas. Two hundred and twenty-seven patients with hepatocellular carcinoma completed questionnaires. After adjusting for demographic and clinical characteristics, Asian patients still had significantly better HRQoL scores in emotional functioning, insomnia, (QLQ-C30) and in sexual interest (QLQ-HCC18). We also found an interaction in physical functioning (QLQ-C30) and fatigue (QLQ-HCC18) between geographic region and marital status, married European had worse HRQoL scores than Asian singles. Both clinical characteristics and geographic areas affected the HRQoL in with hepatocellular carcinoma. Cultural differences and clinical differences in the pattern of disease due to active surveillance of Asian countries may explain the results. © 2016 John Wiley & Sons Australia, Ltd.

Quantitative assessment of desertification in south of Iran using MEDALUS method.

PubMed

Sepehr, A; Hassanli, A M; Ekhtesasi, M R; Jamali, J B

2007-11-01

The main aim of this study was the quantitative assessment of desertification process in the case study area of the Fidoye-Garmosht plain (Southern Iran). Based on the MEDALUS approach and the characteristics of study area a regional model developed using GIS. Six main factors or indicators of desertification including: soil, climate, erosion, plant cover, groundwater and management were considered for evaluation. Then several sub-indicators affecting the quality of each main indicator were identified. Based on the MEDALUS approach, each sub-indicator was quantified according to its quality and given a weighting of between 1.0 and 2.0. ArcGIS 9 was used to analyze and prepare the layers of quality maps using the geometric mean to integrate the individual sub-indicator maps. In turn the geometric mean of all six quality maps was used to generate a single desertification status map. Results showed that 12% of the area is classified as very severe, 81% as severe and 7% as moderately affected by desertification. In addition the plant cover and groundwater indicators were the most important factors affecting desertification process in the study area. The model developed may be used to assess desertification process and distinguish the areas sensitive to desertification in the study region and in regions with the similar characteristics.

Psychometric Characteristics of a Patient Reported Outcome Measure on Ego-Integrity and Despair among Cancer Patients

PubMed Central

Kleijn, Gitta; Post, Lenneke; Witte, Birgit I.; Bohlmeijer, Ernst T.; Westerhof, Gerben J.; Cuijpers, Pim; Verdonck-de Leeuw, Irma M.

2016-01-01

Purpose To evaluate psychometric characteristics of a questionnaire (the Northwestern Ego-integrity Scale (NEIS)) on ego-integrity (the experience of wholeness and meaning in life, even in spite of negative experiences) and despair (the experience of regret about the life one has led, and feelings of sadness, failure and hopelessness) among cancer patients. Methods Cancer patients (n = 164) completed patient reported outcome measures on ego-integrity and despair (NEIS), psychological distress, anxiety and depression (Hospital Anxiety and Depression Scale (HADS)), and quality of life (EORTC QLQ-C30 (cancer survivors, n = 57) or EORTC QLQ-C15-PAL (advanced cancer patients, n = 107)). Confirmatory Factor Analysis was used to assess construct validity. Cronbach’s alpha was used to assess internal consistency. Convergent validity was tested based on a priori defined hypotheses: a higher level of ego-integrity was expected to be related to a higher level of quality of life, and lower levels of distress, depression and anxiety; a higher level of despair was expected to be related to a lower level of quality of life, and higher levels of distress, depression and anxiety. Results The majority of all items (94.5%) of the NEIS were completed by patients and single item missing rate was below 2%. The two subscales, labeled as Ego-integrity (5 items) and Despair (4 items) had acceptable internal consistency (Cronbach’s alpha .72 and .61, respectively). The Ego-integrity subscale was not significantly associated with quality of life, distress, anxiety, or depression. The Despair subscale correlated significantly (p <.001) with quality of life (r = -.29), distress (r = .44), anxiety (r = .47) and depression (r = .32). Conclusion The NEIS has good psychometric characteristics to assess ego-integrity and despair among cancer patients. PMID:27195750

Total quality index of ultrasound-treated blueberry and cranberry juices and nectars.

PubMed

Režek Jambrak, Anet; Šimunek, Marina; Djekic, Ilija

2018-01-01

The influence of ultrasound in combination with elevated temperature (thermosonication) is important in inactivation effects on microorganisms. However, overall quality of these products can be deteriorated. The aim of this study was to examine the use of a single quality index in evaluating effects of ultrasound technology on quality characteristics of blueberry and cranberry juices and nectars. For the purpose of this study based on 10 quality parameters, two mathematical models for calculating a single total quality index have been introduced. Samples were treated according to the experimental design, with high power ultrasound frequency of 20 kHz under various conditions (treatment time: 3, 6 and 9 min, sample temperature: 20 ℃, for thermosonication: 40 and 60 ℃ and amplitude: 60, 90 and 120 µm). Mathematical index of total quality index in order to evaluate total quality of ultrasound-treated juices and nectars was established. For cranberry juices, treatments '11' (amplitude 120 µm) and '16' (amplitude 60 µm) both for 9 min and the temperature of 20 ℃ were best scored for both models. Treatment '6' (amplitude 120 µm, 3 min treatment time and the sample temperature of 20 ℃) for cranberry nectars was among the best for both models. Ultrasound treatments '6' of amplitude 120 µm, 3 min and the temperature of 20 ℃ and '11' same amplitude 120 µm and temperature, but 9 min were best scored blueberry juices for both models. Blueberry nectar had best total quality index for treatments '5' (amplitude 120 µm, 6 min treatment time and the sample temperature of 40 ℃) and '6' (amplitude 120 µm, 3 min treatment time and the sample temperature of 20 ℃).

A dual-loop model of the human controller in single-axis tracking tasks

NASA Technical Reports Server (NTRS)

Hess, R. A.

1977-01-01

A dual loop model of the human controller in single axis compensatory tracking tasks is introduced. This model possesses an inner-loop closure which involves feeding back that portion of the controlled element output rate which is due to control activity. The sensory inputs to the human controller are assumed to be system error and control force. The former is assumed to be sensed via visual, aural, or tactile displays while the latter is assumed to be sensed in kinesthetic fashion. A nonlinear form of the model is briefly discussed. This model is then linearized and parameterized. A set of general adaptive characteristics for the parameterized model is hypothesized. These characteristics describe the manner in which the parameters in the linearized model will vary with such things as display quality. It is demonstrated that the parameterized model can produce controller describing functions which closely approximate those measured in laboratory tracking tasks for a wide variety of controlled elements.

White light for the fast lane: supercontinuum generation in all-normal dispersion fibers for ultrafast photonics

NASA Astrophysics Data System (ADS)

Heidt, Alexander M.

2014-03-01

This talk will give an overview of the unique properties of supercontinuum generation (SCG) in all-normal dispersion (ANDi) fibers pumped by ultrashort pulses and the possibilities they offer for ultrafast photonics applications. In contrast to their anomalously pumped counterparts, the SCG process in ANDi fibers conserves a single ultrashort pulse in the time domain, completely suppresses soliton formation and decay, and avoids noise-amplifying nonlinear dynamics. The resulting spectra combine the best of both worlds - the broad, more than octave-spanning bandwidths usually associated with anomalous dispersion pumping with the high temporal coherence, pulse-to-pulse stability and well-defined temporal pulse characteristics known from the normal dispersion regime. These characteristics are ideally suited for ultrafast photonics, and I will present application examples including the generation of high quality single-cycle pulses and their amplification, as well as ultrafast spectroscopy. This talk will also explore the exciting new possibilities enabled by extending this approach into the mid-IR spectral region using novel soft glass fiber designs.

Effect of Laser Power and Scan Speed on Melt Pool Characteristics of Commercially Pure Titanium (CP-Ti)

NASA Astrophysics Data System (ADS)

Kusuma, Chandrakanth; Ahmed, Sazzad H.; Mian, Ahsan; Srinivasan, Raghavan

2017-07-01

Selective laser melting (SLM) is an additive manufacturing technique that creates complex parts by selectively melting metal powder layer-by-layer using a laser. In SLM, the process parameters decide the quality of the fabricated component. In this study, single beads of commercially pure titanium (CP-Ti) were melted on a substrate of the same material using an in-house built SLM machine. Multiple combinations of laser power and scan speed were used for single bead fabrication, while the laser beam diameter and powder layer thickness were kept constant. This experimental study investigated the influence of laser power, scan speed, and laser energy density on the melt pool formation, surface morphology, geometry (width and height), and hardness of solidified beads. In addition, the observed unfavorable effect such as inconsistency in melt pool width formation is discussed. The results show that the quality, geometry, and hardness of solidified melt pool are significantly affected by laser power, scanning speed, and laser energy density.

Surface-emitting circular DFB, disk- and ring- Bragg resonator lasers with chirped gratings: a unified theory and comparative study.

PubMed

Sun, Xiankai; Yariv, Amnon

2008-06-09

We have developed a theory that unifies the analysis of the modal properties of surface-emitting chirped circular grating lasers. This theory is based on solving the resonance conditions which involve two types of reflectivities of chirped circular gratings. This approach is shown to be in agreement with previous derivations which use the characteristic equations. Utilizing this unified analysis, we obtain the modal properties of circular DFB, disk-, and ring- Bragg resonator lasers. We also compare the threshold gain, single mode range, quality factor, emission efficiency, and modal area of these types of circular grating lasers. It is demonstrated that, under similar conditions, disk Bragg resonator lasers have the highest quality factor, the highest emission efficiency, and the smallest modal area, indicating their suitability in low-threshold, high-efficiency, ultracompact laser design, while ring Bragg resonator lasers have a large single mode range, high emission efficiency, and large modal area, indicating their suitability for high-efficiency, large-area, high-power applications.

Ultrashort pulse amplification in cryogenically cooled amplifiers

DOEpatents

Backus, Sterling J.; Kapteyn, Henry C.; Murnane, Margaret Mary

2004-10-12

A laser amplifier system amplifies pulses in a single "stage" from .about.10.sup.-9 joules to more than 10.sup.-3 joules, with average power of 1-10 watts, and beam quality M.sup.2 <2. The laser medium is cooled substantially below room temperature, as a means to improve the optical and thermal characteristics of the medium. This is done with the medium inside a sealed, evacuated or purged cell to avoid moisture or other materials condensing on the surface. A "seed" pulse from a separate laser is passed through the laser medium, one or more times, in any of a variety of configurations including single-pass, multiple-pass, and regenerative amplifier configurations.

Crystal growth of LiIn 1–xGa xSe 2 crystals

DOE PAGES

Wiggins, Brenden; Bell, Joseph; Woodward, Jonathan; ...

2016-10-22

Lithium containing chalcogenide single crystals have become very promising materials for photonics and radiation detection. Detection applications include nuclear nonproliferation, neutron science, and stellar investigations for the search of life. Synthesis and single crystal growth methods for lithium containing chalcogenide, specifically LiIn 1-xGa xSe 2, single crystals are discussed. This study elucidates the possibility of improving neutron detection by reducing the indium capture contribution; with the incorporation of the lithium-6 isotope, gallium substitution may overcome the neutron detection efficiency limitation of 6LiInSe 2 due to appreciable neutron capture by the indium-115 isotope. As a figure of merit, the ternary parentmore » compounds 6LiInSe 2 and 6LiGaSe 2 were included in this study. Quality crystals can be obtained utilizing the vertical Bridgman method to produce quaternary compounds with tunable optical properties. Here, quaternary crystals of varying quality depending on the gallium concentration, approximately 5 x 5 x 2 mm 3 or larger in volume, were harvested, analyzed and revealed tunable absorption characteristics between 2.8-3.4 eV.« less

Tunneling and Origin of Large Access Resistance in Layered-Crystal Organic Transistors

NASA Astrophysics Data System (ADS)

Hamai, Takamasa; Arai, Shunto; Minemawari, Hiromi; Inoue, Satoru; Kumai, Reiji; Hasegawa, Tatsuo

2017-11-01

Layered crystallinity of organic semiconductors is crucial to obtaining high-performance organic thin-film transistors (OTFTs), as it allows both smooth-channel-gate-insulator interface formation and efficient two-dimensional carrier transport along the interface. However, the role of vertical transport across the crystalline molecular layers in device operations has not been a crucial subject so far. Here, we show that the interlayer carrier transport causes unusual nonlinear current-voltage characteristics and enormous access resistance in extremely high-quality single-crystal OTFTs based on 2-decyl-7-phenyl[1]-benzothieno[3 ,2 -b ][1]benzothiophene (Ph -BTBT -C10 ) that involve inherent multiple semiconducting π -conjugated layers interposed, respectively, by electrically inert alkyl-chain layers. The output characteristics present layer-number (n )-dependent nonlinearity that becomes more evident at larger n (1 ≤n ≤15 ), demonstrating tunneling across multiple alkyl-chain layers. The n -dependent device mobility and four-probe measurements reveal that the alkyl-chain layers generate a large access resistance that suppresses the device mobility from the intrinsic value of about 20 cm2 V-1 s-1 . Our findings clarify the reason why device characteristics are distributed in single-crystal OTFTs.

Influence of the Pixel Sizes of Reference Computed Tomography on Single-photon Emission Computed Tomography Image Reconstruction Using Conjugate-gradient Algorithm.

PubMed

Okuda, Kyohei; Sakimoto, Shota; Fujii, Susumu; Ida, Tomonobu; Moriyama, Shigeru

The frame-of-reference using computed-tomography (CT) coordinate system on single-photon emission computed tomography (SPECT) reconstruction is one of the advanced characteristics of the xSPECT reconstruction system. The aim of this study was to reveal the influence of the high-resolution frame-of-reference on the xSPECT reconstruction. 99m Tc line-source phantom and National Electrical Manufacturers Association (NEMA) image quality phantom were scanned using the SPECT/CT system. xSPECT reconstructions were performed with the reference CT images in different sizes of the display field-of-view (DFOV) and pixel. The pixel sizes of the reconstructed xSPECT images were close to 2.4 mm, which is acquired as originally projection data, even if the reference CT resolution was varied. The full width at half maximum (FWHM) of the line-source, absolute recovery coefficient, and background variability of image quality phantom were independent on the sizes of DFOV in the reference CT images. The results of this study revealed that the image quality of the reconstructed xSPECT images is not influenced by the resolution of frame-of-reference on SPECT reconstruction.

CALiPER Report 20.2: Dimming, Flicker, and Power Quality Characteristics of LED PAR38 Lamps

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2014-03-31

This report focuses on the flicker and power quality performance of the Series 20 lamps at full output and various dimmed levels. All of the Series 20 PAR38 lamps that manufacturers claimed to be dimmable (including all halogen lamps) were evaluated individually (one lamp at a time) both on a switch and under the control of a phase-cut dimmer designed for use with "all classes of bulbs." Measurements of luminous flux, flicker, and power quality were taken at 10 target dimmed settings and compared with operation on a switch. Because only a single unit of each product was evaluated onmore » a single dimmer that may or may not have been recommended by its manufacturer, this report focuses on the performance of the products relative to each other, rather than the best-case performance of each lamp or variation in performance delivered from each lamp. Despite these limitations, the results suggest that LED performance is improving, and performance trends are beginning to emerge, perhaps due in part to the identification of preferred LED driver strategies for lamp products.« less

Producing desired ice faces

PubMed Central

Shultz, Mary Jane; Brumberg, Alexandra; Bisson, Patrick J.; Shultz, Ryan

2015-01-01

The ability to prepare single-crystal faces has become central to developing and testing models for chemistry at interfaces, spectacularly demonstrated by heterogeneous catalysis and nanoscience. This ability has been hampered for hexagonal ice, Ih––a fundamental hydrogen-bonded surface––due to two characteristics of ice: ice does not readily cleave along a crystal lattice plane and properties of ice grown on a substrate can differ significantly from those of neat ice. This work describes laboratory-based methods both to determine the Ih crystal lattice orientation relative to a surface and to use that orientation to prepare any desired face. The work builds on previous results attaining nearly 100% yield of high-quality, single-crystal boules. With these methods, researchers can prepare authentic, single-crystal ice surfaces for numerous studies including uptake measurements, surface reactivity, and catalytic activity of this ubiquitous, fundamental solid. PMID:26512102

Experimental Investigation on Cutting Characteristics in Nanometric Plunge-Cutting of BK7 and Fused Silica Glasses

PubMed Central

An, Qinglong; Ming, Weiwei; Chen, Ming

2015-01-01

Ductile cutting are most widely used in fabricating high-quality optical glass components to achieve crack-free surfaces. For ultra-precision machining of brittle glass materials, critical undeformed chip thickness (CUCT) commonly plays a pivotal role in determining the transition point from ductile cutting to brittle cutting. In this research, cutting characteristics in nanometric cutting of BK7 and fused silica glasses, including machined surface morphology, surface roughness, cutting force and specific cutting energy, were investigated with nanometric plunge-cutting experiments. The same cutting speed of 300 mm/min was used in the experiments with single-crystal diamond tool. CUCT was determined according to the mentioned cutting characteristics. The results revealed that 320 nm was found as the CUCT in BK7 cutting and 50 nm was determined as the size effect of undeformed chip thickness. A high-quality machined surface could be obtained with the undeformed chip thickness between 50 and 320 nm at ductile cutting stage. Moreover, no CUCT was identified in fused silica cutting with the current cutting conditions, and brittle-fracture mechanism was confirmed as the predominant chip-separation mode throughout the nanometric cutting operation. PMID:28788010

Experimental Investigation on Cutting Characteristics in Nanometric Plunge-Cutting of BK7 and Fused Silica Glasses.

PubMed

An, Qinglong; Ming, Weiwei; Chen, Ming

2015-03-27

Ductile cutting are most widely used in fabricating high-quality optical glass components to achieve crack-free surfaces. For ultra-precision machining of brittle glass materials, critical undeformed chip thickness (CUCT) commonly plays a pivotal role in determining the transition point from ductile cutting to brittle cutting. In this research, cutting characteristics in nanometric cutting of BK7 and fused silica glasses, including machined surface morphology, surface roughness, cutting force and specific cutting energy, were investigated with nanometric plunge-cutting experiments. The same cutting speed of 300 mm/min was used in the experiments with single-crystal diamond tool. CUCT was determined according to the mentioned cutting characteristics. The results revealed that 320 nm was found as the CUCT in BK7 cutting and 50 nm was determined as the size effect of undeformed chip thickness. A high-quality machined surface could be obtained with the undeformed chip thickness between 50 and 320 nm at ductile cutting stage. Moreover, no CUCT was identified in fused silica cutting with the current cutting conditions, and brittle-fracture mechanism was confirmed as the predominant chip-separation mode throughout the nanometric cutting operation.

In-flight simulation investigation of rotorcraft pitch-roll cross coupling

NASA Technical Reports Server (NTRS)

Watson, Douglas C.; Hindson, William S.

1988-01-01

An in-flight simulation experiment investigating the handling qualities effects of the pitch-roll cross-coupling characteristic of single-main-rotor helicopters is described. The experiment was conducted using the NASA/Army CH-47B variable stability helicopter with an explicit-model-following control system. The research is an extension of an earlier ground-based investigation conducted on the NASA Ames Research Center's Vertical Motion Simulator. The model developed for the experiment is for an unaugmented helicopter with cross-coupling implemented using physical rotor parameters. The details of converting the model from the simulation to use in flight are described. A frequency-domain comparison of the model and actual aircraft responses showing the fidelity of the in-flight simulation is described. The evaluation task was representative of nap-of-the-Earth maneuvering flight. The results indicate that task demands are important in determining allowable levels of coupling. In addition, on-axis damping characteristics influence the frequency-dependent characteristics of coupling and affect the handling qualities. Pilot technique, in terms of learned control crossfeeds, can improve performance and lower workload for particular types of coupling. The results obtained in flight corroborated the simulation results.

Objective Assessment of Image Quality VI: Imaging in Radiation Therapy

PubMed Central

Barrett, Harrison H.; Kupinski, Matthew A.; Müeller, Stefan; Halpern, Howard J.; Morris, John C.; Dwyer, Roisin

2015-01-01

Earlier work on Objective Assessment of Image Quality (OAIQ) focused largely on estimation or classification tasks in which the desired outcome of imaging is accurate diagnosis. This paper develops a general framework for assessing imaging quality on the basis of therapeutic outcomes rather than diagnostic performance. By analogy to Receiver Operating Characteristic (ROC) curves and their variants as used in diagnostic OAIQ, the method proposed here utilizes the Therapy Operating Characteristic or TOC curves, which are plots of the probability of tumor control vs. the probability of normal-tissue complications as the overall dose level of a radiotherapy treatment is varied. The proposed figure of merit is the area under the TOC curve, denoted AUTOC. This paper reviews an earlier exposition of the theory of TOC and AUTOC, which was specific to the assessment of image-segmentation algorithms, and extends it to other applications of imaging in external-beam radiation treatment as well as in treatment with internal radioactive sources. For each application, a methodology for computing the TOC is presented. A key difference between ROC and TOC is that the latter can be defined for a single patient rather than a population of patients. PMID:24200954

High-frequency and high-quality silicon carbide optomechanical microresonators

PubMed Central

Lu, Xiyuan; Lee, Jonathan Y.; Lin, Qiang

2015-01-01

Silicon carbide (SiC) exhibits excellent material properties attractive for broad applications. We demonstrate the first SiC optomechanical microresonators that integrate high mechanical frequency, high mechanical quality, and high optical quality into a single device. The radial-breathing mechanical mode has a mechanical frequency up to 1.69 GHz with a mechanical Q around 5500 in atmosphere, which corresponds to a fm · Qm product as high as 9.47 × 1012 Hz. The strong optomechanical coupling allows us to efficiently excite and probe the coherent mechanical oscillation by optical waves. The demonstrated devices, in combination with the superior thermal property, chemical inertness, and defect characteristics of SiC, show great potential for applications in metrology, sensing, and quantum photonics, particularly in harsh environments that are challenging for other device platforms. PMID:26585637

Impact of flying qualities on mission effectiveness for helicopter air combat, volume 1

NASA Technical Reports Server (NTRS)

Harris, T. M.; Beerman, D. A.

1983-01-01

A computer simulation to investigate the impact of flying qualities on mission effectiveness is described. The objective of the study was to relate the effects of flying qualities, such as precision of flight path control and pilot workload, to the ability of a single Scout helicopter, or helicopter team, to accomplish a specified anti-armor mission successfully. The model of the actual engagement is a Monte Carlo simulation that has the capability to assess the effects of helicopter characteristics, numbers, tactics and weaponization on the force's ability to accomplish a specific mission against a specified threat as a function of realistic tactical factors. A key feature of this program is a simulation of micro-terrain features and their effects on detection, exposure, and masking for nap-of-the-earth (NOE) flight.

A Quality Assurance Initiative for Commercial-Scale Production in High-Throughput Cryopreservation of Blue Catfish Sperm

PubMed Central

Hu, E; Liao, T. W.; Tiersch, T. R.

2013-01-01

Cryopreservation of fish sperm has been studied for decades at a laboratory (research) scale. However, high-throughput cryopreservation of fish sperm has recently been developed to enable industrial-scale production. This study treated blue catfish (Ictalurus furcatus) sperm high-throughput cryopreservation as a manufacturing production line and initiated quality assurance plan development. The main objectives were to identify: 1) the main production quality characteristics; 2) the process features for quality assurance; 3) the internal quality characteristics and their specification designs; 4) the quality control and process capability evaluation methods, and 5) the directions for further improvements and applications. The essential product quality characteristics were identified as fertility-related characteristics. Specification design which established the tolerance levels according to demand and process constraints was performed based on these quality characteristics. Meanwhile, to ensure integrity throughout the process, internal quality characteristics (characteristics at each quality control point within process) that could affect fertility-related quality characteristics were defined with specifications. Due to the process feature of 100% inspection (quality inspection of every fish), a specific calculation method, use of cumulative sum (CUSUM) control charts, was applied to monitor each quality characteristic. An index of overall process evaluation, process capacity, was analyzed based on in-control process and the designed specifications, which further integrates the quality assurance plan. With the established quality assurance plan, the process could operate stably and quality of products would be reliable. PMID:23872356

A systematic literature review of open source software quality assessment models.

PubMed

Adewumi, Adewole; Misra, Sanjay; Omoregbe, Nicholas; Crawford, Broderick; Soto, Ricardo

2016-01-01

Many open source software (OSS) quality assessment models are proposed and available in the literature. However, there is little or no adoption of these models in practice. In order to guide the formulation of newer models so they can be acceptable by practitioners, there is need for clear discrimination of the existing models based on their specific properties. Based on this, the aim of this study is to perform a systematic literature review to investigate the properties of the existing OSS quality assessment models by classifying them with respect to their quality characteristics, the methodology they use for assessment, and their domain of application so as to guide the formulation and development of newer models. Searches in IEEE Xplore, ACM, Science Direct, Springer and Google Search is performed so as to retrieve all relevant primary studies in this regard. Journal and conference papers between the year 2003 and 2015 were considered since the first known OSS quality model emerged in 2003. A total of 19 OSS quality assessment model papers were selected. To select these models we have developed assessment criteria to evaluate the quality of the existing studies. Quality assessment models are classified into five categories based on the quality characteristics they possess namely: single-attribute, rounded category, community-only attribute, non-community attribute as well as the non-quality in use models. Our study reflects that software selection based on hierarchical structures is found to be the most popular selection method in the existing OSS quality assessment models. Furthermore, we found that majority (47%) of the existing models do not specify any domain of application. In conclusion, our study will be a valuable contribution to the community and helps the quality assessment model developers in formulating newer models and also to the practitioners (software evaluators) in selecting suitable OSS in the midst of alternatives.

Single-Subject Evaluation: A Tool for Quality Assurance.

ERIC Educational Resources Information Center

Nuehring, Elane M.; Pascone, Anne B.

1986-01-01

The use of single-subject designs in peer review, in utilization review, and in other quality-assurance audits is encouraged. Presents an overview of the methodologies of single-subject designs and quality assurance, and provides examples of cases in which single-subject techniques furnished relevant quality assurance documentation. (Author/ABB)

Flight testing and frequency domain analysis for rotorcraft handling qualities characteristics

NASA Technical Reports Server (NTRS)

Ham, Johnnie A.; Gardner, Charles K.; Tischler, Mark B.

1993-01-01

A demonstration of frequency domain flight testing techniques and analyses was performed on a U.S. Army OH-58D helicopter in support of the OH-58D Airworthiness and Flight Characteristics Evaluation and the Army's development and ongoing review of Aeronautical Design Standard 33C, Handling Qualities Requirements for Military Rotorcraft. Hover and forward flight (60 knots) tests were conducted in 1 flight hour by Army experimental test pilots. Further processing of the hover data generated a complete database of velocity, angular rate, and acceleration frequency responses to control inputs. A joint effort was then undertaken by the Airworthiness Qualification Test Directorate (AQTD) and the U.S. Army Aeroflightdynamics Directorate (AFDD) to derive handling qualities information from the frequency response database. A significant amount of information could be extracted from the frequency domain database using a variety of approaches. This report documents numerous results that have been obtained from the simple frequency domain tests; in many areas, these results provide more insight into the aircraft dynamics that affect handling qualities than to traditional flight tests. The handling qualities results include ADS-33C bandwidth and phase delay calculations, vibration spectral determinations, transfer function models to examine single axis results, and a six degree of freedom fully coupled state space model. The ability of this model to accurately predict aircraft responses was verified using data from pulse inputs. This report also documents the frequency-sweep flight test technique and data analysis used to support the tests.

Requirements and Techniques for Developing and Measuring Simulant Materials

NASA Technical Reports Server (NTRS)

Rickman, Doug; Owens, Charles; Howard, Rick

2006-01-01

The 1989 workshop report entitled Workshop on Production and Uses of Simulated Lunar Materials and the Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage, NASA Technical Publication identify and reinforced a need for a set of standards and requirements for the production and usage of the lunar simulant materials. As NASA need prepares to return to the moon, a set of requirements have been developed for simulant materials and methods to produce and measure those simulants have been defined. Addressed in the requirements document are: 1) a method for evaluating the quality of any simulant of a regolith, 2) the minimum Characteristics for simulants of lunar regolith, and 3) a method to produce lunar regolith simulants needed for NASA's exploration mission. A method to evaluate new and current simulants has also been rigorously defined through the mathematics of Figures of Merit (FoM), a concept new to simulant development. A single FoM is conceptually an algorithm defining a single characteristic of a simulant and provides a clear comparison of that characteristic for both the simulant and a reference material. Included as an intrinsic part of the algorithm is a minimum acceptable performance for the characteristic of interest. The algorithms for the FoM for Standard Lunar Regolith Simulants are also explicitly keyed to a recommended method to make lunar simulants.

Characteristics of several NIR tuneable diode lasers for spectroscopic based gas sensing: a comparison.

PubMed

Weldon, Vincent; McInerney, David; Phelan, Richard; Lynch, Michael; Donegan, John

2006-04-01

Tuneable laser diodes were characterized and compared for use as tuneable sources in gas absorption spectroscopy. Specifically, the characteristics of monolithic widely tuneable single frequency lasers, such as sampled grating distributed Bragg reflector laser and modulated grating Y-branch laser diodes, recently developed for optical communications, with operating wavelengths in the 1,520 nm

Relationship between quality of care and choice of clinical computing system: retrospective analysis of family practice performance under the UK's quality and outcomes framework.

PubMed

Kontopantelis, Evangelos; Buchan, Iain; Reeves, David; Checkland, Kath; Doran, Tim

2013-08-02

To investigate the relationship between performance on the UK Quality and Outcomes Framework pay-for-performance scheme and choice of clinical computer system. Retrospective longitudinal study. Data for 2007-2008 to 2010-2011, extracted from the clinical computer systems of general practices in England. All English practices participating in the pay-for-performance scheme: average 8257 each year, covering over 99% of the English population registered with a general practice. Levels of achievement on 62 quality-of-care indicators, measured as: reported achievement (levels of care after excluding inappropriate patients); population achievement (levels of care for all patients with the relevant condition) and percentage of available quality points attained. Multilevel mixed effects multiple linear regression models were used to identify population, practice and clinical computing system predictors of achievement. Seven clinical computer systems were consistently active in the study period, collectively holding approximately 99% of the market share. Of all population and practice characteristics assessed, choice of clinical computing system was the strongest predictor of performance across all three outcome measures. Differences between systems were greatest for intermediate outcomes indicators (eg, control of cholesterol levels). Under the UK's pay-for-performance scheme, differences in practice performance were associated with the choice of clinical computing system. This raises the question of whether particular system characteristics facilitate higher quality of care, better data recording or both. Inconsistencies across systems need to be understood and addressed, and researchers need to be cautious when generalising findings from samples of providers using a single computing system.

When a gold standard isn't so golden: Lack of prediction of subjective sleep quality from sleep polysomnography.

PubMed

Kaplan, Katherine A; Hirshman, Jason; Hernandez, Beatriz; Stefanick, Marcia L; Hoffman, Andrew R; Redline, Susan; Ancoli-Israel, Sonia; Stone, Katie; Friedman, Leah; Zeitzer, Jamie M

2017-02-01

Reports of subjective sleep quality are frequently collected in research and clinical practice. It is unclear, however, how well polysomnographic measures of sleep correlate with subjective reports of prior-night sleep quality in elderly men and women. Furthermore, the relative importance of various polysomnographic, demographic and clinical characteristics in predicting subjective sleep quality is not known. We sought to determine the correlates of subjective sleep quality in older adults using more recently developed machine learning algorithms that are suitable for selecting and ranking important variables. Community-dwelling older men (n=1024) and women (n=459), a subset of those participating in the Osteoporotic Fractures in Men study and the Study of Osteoporotic Fractures study, respectively, completed a single night of at-home polysomnographic recording of sleep followed by a set of morning questions concerning the prior night's sleep quality. Questionnaires concerning demographics and psychological characteristics were also collected prior to the overnight recording and entered into multivariable models. Two machine learning algorithms, lasso penalized regression and random forests, determined variable selection and the ordering of variable importance separately for men and women. Thirty-eight sleep, demographic and clinical correlates of sleep quality were considered. Together, these multivariable models explained only 11-17% of the variance in predicting subjective sleep quality. Objective sleep efficiency emerged as the strongest correlate of subjective sleep quality across all models, and across both sexes. Greater total sleep time and sleep stage transitions were also significant objective correlates of subjective sleep quality. The amount of slow wave sleep obtained was not determined to be important. Overall, the commonly obtained measures of polysomnographically-defined sleep contributed little to subjective ratings of prior-night sleep quality. Though they explained relatively little of the variance, sleep efficiency, total sleep time and sleep stage transitions were among the most important objective correlates. Published by Elsevier B.V.

When a gold standard isn't so golden: Lack of prediction of subjective sleep quality from sleep polysomnography

PubMed Central

Kaplan, Katherine A.; Hirshman, Jason; Hernandez, Beatriz; Stefanick, Marcia L.; Hoffman, Andrew R.; Redline, Susan; Ancoli-Israel, Sonia; Stone, Katie; Friedman, Leah; Zeitzer, Jamie M.

2016-01-01

Background Reports of subjective sleep quality are frequently collected in research and clinical practice. It is unclear, however, how well polysomnographic measures of sleep correlate with subjective reports of prior-night sleep quality in elderly men and women. Furthermore, the relative importance of various polysomnographic, demographic and clinical characteristics in predicting subjective sleep quality is not known. We sought to determine the correlates of subjective sleep quality in in older adults using more recently developed machine learning algorithms that are suitable for selecting and ranking important variables. Methods Community-dwelling older men (n=1024) and women (n=459), a subset of those participating in the Osteoporotic Fractures in Men study and the Study of Osteoporotic Fractures study, respectively, completed a single night of at-home polysomnographic recording of sleep followed by a set of morning questions concerning the prior night's sleep quality. Questionnaires concerning demographics and psychological characteristics were also collected prior to the overnight recording and entered into multivariable models. Two machine learning algorithms, lasso penalized regression and random forests, determined variable selection and the ordering of variable importance separately for men and women. Results Thirty-eight sleep, demographic and clinical correlates of sleep quality were considered. Together, these multivariable models explained only 11-17% of the variance in predicting subjective sleep quality. Objective sleep efficiency emerged as the strongest correlate of subjective sleep quality across all models, and across both sexes. Greater total sleep time and sleep stage transitions were also significant objective correlates of subjective sleep quality. The amount of slow wave sleep obtained was not determined to be important. Conclusions Overall, the commonly obtained measures of polysomnographically-defined sleep contributed little to subjective ratings of prior-night sleep quality. Though they explained relatively little of the variance, sleep efficiency, total sleep time and sleep stage transitions were among the most important objective correlates. PMID:27889439

Evaluating voice characteristics of first-year acting students in Israel: factor analysis.

PubMed

Amir, Ofer; Primov-Fever, Adi; Kushnir, Tami; Kandelshine-Waldman, Osnat; Wolf, Michael

2013-01-01

Acting students require diverse, high-quality, and high-intensity vocal performance from early stages of their training. Demanding vocal activities, before developing the appropriate vocal skills, put them in high risk for developing vocal problems. A retrospective analysis of voice characteristics of first-year acting students using several voice evaluation tools. A total of 79 first-year acting students (55 women and 24 men) were assigned into two study groups: laryngeal findings (LFs) and no laryngeal findings, based on stroboscopic findings. Their voice characteristics were evaluated using acoustic analysis, aerodynamic examination, perceptual scales, and self-report questionnaires. Results obtained from each set of measures were examined using a factor analysis approach. Significant differences between the two groups were found for a single fundamental frequency (F(0))-Regularity factor; a single Grade, Roughness, Breathiness, Asthenia, Strain perceptual factor; and the three self-evaluation factors. Gender differences were found for two acoustic analysis factors, which were based on F(0) and its derivatives, namely an aerodynamic factor that represents expiratory volume measurements and a single self-evaluation factor that represents the tendency to seek therapy. Approximately 50% of the first-year acting students had LFs. These students differed from their peers in the control group in a single acoustic analysis factor, as well as perceptual and self-report factors. No group differences, however, were found for the aerodynamic factors. Early laryngeal examination and voice evaluation of future professional voice users could provide a valuable individual baseline, to which later examinations could be compared, and assist in providing personally tailored treatment. Copyright © 2013 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

A 64-pixel NbTiN superconducting nanowire single-photon detector array for spatially resolved photon detection.

PubMed

Miki, Shigehito; Yamashita, Taro; Wang, Zhen; Terai, Hirotaka

2014-04-07

We present the characterization of two-dimensionally arranged 64-pixel NbTiN superconducting nanowire single-photon detector (SSPD) array for spatially resolved photon detection. NbTiN films deposited on thermally oxidized Si substrates enabled the high-yield production of high-quality SSPD pixels, and all 64 SSPD pixels showed uniform superconducting characteristics within the small range of 7.19-7.23 K of superconducting transition temperature and 15.8-17.8 μA of superconducting switching current. Furthermore, all of the pixels showed single-photon sensitivity, and 60 of the 64 pixels showed a pulse generation probability higher than 90% after photon absorption. As a result of light irradiation from the single-mode optical fiber at different distances between the fiber tip and the active area, the variations of system detection efficiency (SDE) in each pixel showed reasonable Gaussian distribution to represent the spatial distributions of photon flux intensity.

Indoor environmental quality in French dwellings and building characteristics

NASA Astrophysics Data System (ADS)

Langer, Sarka; Ramalho, Olivier; Derbez, Mickaël; Ribéron, Jacques; Kirchner, Severine; Mandin, Corinne

2016-03-01

A national survey on indoor environmental quality covering 567 residences in mainland France was performed during 2003-2005. The measured parameters were temperature, relative humidity, CO2, and the indoor air pollutants: fourteen individual volatile organic compounds (VOC), four aldehydes and particulate matter PM10 and PM2.5. The measured indoor concentrations were analyzed for correlations with the building characteristics: type of dwelling, period of construction, dwelling location, type of ventilation system, building material, attached garage and retrofitting. The median night time air exchange rate (AER) for all dwellings was 0.44 h-1. The night time AER was higher in apartments (median = 0.49 h-1) than in single-family houses (median = 0.41 h-1). Concentration of formaldehyde was approximately 30% higher in dwellings built after 1990 compared with older ones; it was higher in dwellings with mechanical ventilation and in concrete buildings. The VOC concentrations depended on the building characteristics to various extents. The sampling season influenced the majority of the indoor climate parameters and the concentrations of the air pollutants to a higher degree than the building characteristics. Multivariate linear regression models revealed that the indoor-outdoor difference in specific humidity, a proxy for number of occupants and their indoor activities, remained a significant predictor for most gaseous and particulate air pollutants. The other strong predictors were outdoor concentration, smoking, attached garage and AER (in descending order).

Temperature Dependence of the Resonant Magnetoelectric Effect in Layered Heterostructures.

PubMed

Burdin, Dmitrii A; Ekonomov, Nikolai A; Chashin, Dmitrii V; Fetisov, Leonid Y; Fetisov, Yuri K; Shamonin, Mikhail

2017-10-16

The dependence of the resonant direct magnetoelectric effect on temperature is studied experimentally in planar composite structures. Samples of rectangular shapes with dimensions of 5 mm × 20 mm employed ferromagnetic layers of either an amorphous (metallic glass) alloy or nickel with a thickness of 20-200 μm and piezoelectric layers of single crystalline langatate material or lead zirconate titanate piezoelectric ceramics with a thickness of 500 μm. The temperature of the samples was varied in a range between 120 and 390 K by blowing a gaseous nitrogen stream around them. It is shown that the effective characteristics of the magnetoelectric effect-such as the mechanical resonance frequency f r , the quality factor Q and the magnitude of the magnetoelectric coefficient α E at the resonance frequency-are contingent on temperature. The interrelations between the temperature changes of the characteristics of the magnetoelectric effect and the temperature variations of the following material parameters-Young's modulus Y , the acoustic quality factor of individual layers, the dielectric constant ε , the piezoelectric modulus d of the piezoelectric layer as well as the piezomagnetic coefficients λ (n) of the ferromagnetic layer-are established. The effect of temperature on the characteristics of the nonlinear magnetoelectric effect is observed for the first time. The results can be useful for designing magnetoelectric heterostructures with specified temperature characteristics, in particular, for the development of thermally stabilized magnetoelectric devices.

Temperature Dependence of the Resonant Magnetoelectric Effect in Layered Heterostructures

PubMed Central

Burdin, Dmitrii A.; Ekonomov, Nikolai A.; Chashin, Dmitrii V.; Fetisov, Leonid Y.; Fetisov, Yuri K.

2017-01-01

The dependence of the resonant direct magnetoelectric effect on temperature is studied experimentally in planar composite structures. Samples of rectangular shapes with dimensions of 5 mm × 20 mm employed ferromagnetic layers of either an amorphous (metallic glass) alloy or nickel with a thickness of 20–200 μm and piezoelectric layers of single crystalline langatate material or lead zirconate titanate piezoelectric ceramics with a thickness of 500 μm. The temperature of the samples was varied in a range between 120 and 390 K by blowing a gaseous nitrogen stream around them. It is shown that the effective characteristics of the magnetoelectric effect—such as the mechanical resonance frequency fr, the quality factor Q and the magnitude of the magnetoelectric coefficient αE at the resonance frequency—are contingent on temperature. The interrelations between the temperature changes of the characteristics of the magnetoelectric effect and the temperature variations of the following material parameters—Young’s modulus Y, the acoustic quality factor of individual layers, the dielectric constant ε, the piezoelectric modulus d of the piezoelectric layer as well as the piezomagnetic coefficients λ(n) of the ferromagnetic layer—are established. The effect of temperature on the characteristics of the nonlinear magnetoelectric effect is observed for the first time. The results can be useful for designing magnetoelectric heterostructures with specified temperature characteristics, in particular, for the development of thermally stabilized magnetoelectric devices. PMID:29035312

Single-Mode Near-Infrared Lasing in a GaAsSb-Based Nanowire Superlattice at Room Temperature

NASA Astrophysics Data System (ADS)

Ren, Dingding; Ahtapodov, Lyubomir; Nilsen, Julie S.; Yang, Jianfeng; Gustafsson, Anders; Huh, Junghwan; Conibeer, Gavin J.; van Helvoort, Antonius T. J.; Fimland, Bjørn-Ove; Weman, Helge

2018-04-01

Semiconductor nanowire lasers can produce guided coherent light emission with miniaturized geometry, bringing about new possibility for a variety of applications including nanophotonic circuits, optical sensing, and on-chip and chip-to-chip optical communications. Here, we report on the realization of single-mode room-temperature lasing from 890 nm to 990 nm utilizing a novel design of single nanowires with GaAsSb-based multiple superlattices as gain medium under optical pumping. The wavelength tunability with comprehensively enhanced lasing performance is shown to result from the unique nanowire structure with efficient gain materials, which delivers a lasing quality factor as high as 1250, a reduced lasing threshold ~ 6 kW cm-2 and a high characteristic temperature ~ 129 K. These results present a major advancement for the design and synthesis of nanowire laser structures, which can pave the way towards future nanoscale integrated optoelectronic systems with stunning performance.

Single-protein detection in crowded molecular environments in cryo-EM images

PubMed Central

Rickgauer, J Peter; Grigorieff, Nikolaus; Denk, Winfried

2017-01-01

We present an approach to study macromolecular assemblies by detecting component proteins’ characteristic high-resolution projection patterns, calculated from their known 3D structures, in single electron cryo-micrographs. Our method detects single apoferritin molecules in vitreous ice with high specificity and determines their orientation and location precisely. Simulations show that high spatial-frequency information and—in the presence of protein background—a whitening filter are essential for optimal detection, in particular for images taken far from focus. Experimentally, we could detect small viral RNA polymerase molecules, distributed randomly among binding locations, inside rotavirus particles. Based on the currently attainable image quality, we estimate a threshold for detection that is 150 kDa in ice and 300 kDa in 100 nm thick samples of dense biological material. DOI: http://dx.doi.org/10.7554/eLife.25648.001 PMID:28467302

Preparation, Single-Molecule Manipulation, and Energy Transfer Investigation of a Polyfluorene-graft-DNA polymer.

PubMed

Madsen, Mikael; Christensen, Rasmus S; Krissanaprasit, Abhichart; Bakke, Mette R; Riber, Camilla F; Nielsen, Karina S; Zelikin, Alexander N; Gothelf, Kurt V

2017-08-04

Conjugated polymers have been intensively studied due to their unique optical and electronic properties combined with their physical flexibility and scalable bottom up synthesis. Although the bulk qualities of conjugated polymers have been extensively utilized in research and industry, the ability to handle and manipulate conjugated polymers at the nanoscale lacks significantly behind. Here, the toolbox for controlled manipulation of conjugated polymers was expanded through the synthesis of a polyfluorene-DNA graft-type polymer (poly(F-DNA)). The polymer possesses the characteristics associated with the conjugated polyfluorene backbone, but the protruding single-stranded DNA provides the material with an exceptional addressability. This study demonstrates controlled single-molecule patterning of poly(F-DNA), as well as energy transfer between two different polymer-DNA conjugates. Finally, highly efficient DNA-directed quenching of polyfluorene fluorescence was shown. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Heterojunction photodiode on cleaved SiC

NASA Astrophysics Data System (ADS)

Solovan, Mykhailo M.; Farah, John; Kovaliuk, Taras T.; Brus, Viktor V.; Mostovyi, Andrii I.; Maistruk, Eduard V.; Maryanchuk, Pavlo D.

2018-01-01

Graphite/n-SiC Shottky diodes were prepared by means of the recently proposed technique based on the transferring of drawn graphite films onto the n-SiC single crystal substrate. Current-voltage characteristics were measured and analyzed. High quality ohmic contancts were prepared by the DC magnetron sputtering of Ni thin films onto cleaved n-type SiC single crystal substrates. The height of the potential barrier and the series resistance of the graphite/n-SiC junctions were measured and analysed. The dominant current transport mechanisms through the diodes were determined. There was shown that the dominant current transport mechanisms through the graphite/n-SiC Shottky diodes were the multi-step tunnel-recombination at forward bias and the tunnelling mechanisms at reverse bias.

The Application of Quality Identification in Honey by Photoacoustic Spectroscopy.

PubMed

Tao, Wen-ting; Yuan, Ping; Guo, Wen-juan; Liu, Jian-en

2015-05-01

The photoacoustic spectrum of glucose, sucrose and honey solutions in the visible range are measured by using the single-light photoacoustic spectrometer, and are compared with the spectra from spedtrophotometry method. The spectral characteristics of the above solutions show that the spectral background intensity and spectral profile have some differences for different kinds of solutions. The spectra of the three kinds of solutions all have strong peak value at 485 and 655 nm, but the intensity ratios between the two peaks are different. Besides, there are characteristic peak at 475, 576 and 630 nm for glucose, and the sucrose has apparent characteristic peak at 632 nm, these characteristic peaks can be used for detecting whether the natural honey has been added glucose or sucrose. By comparing two kinds of spectrum of the same solution, the intensity of photoacoustic spectrum is more responsive to the wavelength, indicating photoacoustic spectrometry has a higher sensitivity in the test of material composition.

Employment characteristics and health status among men and women.

PubMed

Hibbard, J H; Pope, C R

1987-01-01

This study examines the characteristics of jobs held by women as compared to men during the 1970s and assesses associations between job characteristics and family status with health status by sex. Sex differences in perceptions about the meaning of work, commitment to the work role, and stresses and rewards are considered. Survey data on 1490 employed men and women, ages 18-64, drawn from a random sample of enrollees of a large health maintenance organization in 1970-71 are linked with medical record data covering seven years of outpatient and inpatient services. The findings suggest important differences in the characteristics of jobs held by men and women and in the relative importance of these job characteristics in relation to health. Men held jobs with higher quality intrinsic work characteristics and perceived their jobs to be less stressful and less physically and mentally tiring than did women. Social support and integration through work and occupational status were significantly related to health status for both sexes, however, family responsibilities interact with job characteristics to affect health status for women. Single motherhood, in combination with low social support and integration through work, was related to poor health among women.

Quality Evaluation of Agricultural Distillates Using an Electronic Nose

PubMed Central

Dymerski, Tomasz; Gębicki, Jacek; Wardencki, Waldemar; Namieśnik, Jacek

2013-01-01

The paper presents the application of an electronic nose instrument to fast evaluation of agricultural distillates differing in quality. The investigations were carried out using a prototype of electronic nose equipped with a set of six semiconductor sensors by FIGARO Co., an electronic circuit converting signal into digital form and a set of thermostats able to provide gradient temperature characteristics to a gas mixture. A volatile fraction of the agricultural distillate samples differing in quality was obtained by barbotage. Interpretation of the results involved three data analysis techniques: principal component analysis, single-linkage cluster analysis and cluster analysis with spheres method. The investigations prove the usefulness of the presented technique in the quality control of agricultural distillates. Optimum measurements conditions were also defined, including volumetric flow rate of carrier gas (15 L/h), thermostat temperature during the barbotage process (15 °C) and time of sensor signal acquisition from the onset of the barbotage process (60 s). PMID:24287525

Gluten-Free Precooked Rice-Yellow Pea Pasta: Effect of Extrusion-Cooking Conditions on Phenolic Acids Composition, Selected Properties and Microstructure.

PubMed

Bouasla, Abdallah; Wójtowicz, Agnieszka; Zidoune, Mohammed Nasereddine; Olech, Marta; Nowak, Renata; Mitrus, Marcin; Oniszczuk, Anna

2016-05-01

Rice/yellow pea flour blend (2/1 ratio) was used to produce gluten-free precooked pasta using a single-screw modified extrusion-cooker TS-45. The effect of moisture content (28%, 30%, and 32%) and screw speed (60, 80, and 100 rpm) on some quality parameters was assessed. The phenolic acids profile and selected pasta properties were tested, like pasting properties, water absorption capacity, cooking loss, texture characteristics, microstructure, and sensory overall acceptability. Results indicated that dough moisture content influenced all tested quality parameters of precooked pasta except firmness. Screw speed showed an effect only on some quality parameters. The extrusion-cooking process at 30% of dough moisture with 80 rpm is appropriate to obtain rice-yellow pea precooked pasta with high content of phenolics and adequate quality. These pasta products exhibited firm texture, low stickiness, and regular and compact interne structure confirmed by high score in sensory overall acceptability. © 2016 Institute of Food Technologists®

Effects of the internal friction and the solvent quality on the dynamics of a polymer chain closure.

PubMed

Yu, Wancheng; Luo, Kaifu

2015-03-28

Using 3D Langevin dynamics simulations, we investigate the effects of the internal friction and the solvent quality on the dynamics of a polymer chain closure. We show that the chain closure in good solvents is a purely diffusive process. By extrapolation to zero solvent viscosity, we find that the internal friction of a chain plays a non-ignorable role in the dynamics of the chain closure. When the solvent quality changes from good to poor, the mean closure time τc decreases by about 1 order of magnitude for the chain length 20 ≤ N ≤ 100. Furthermore, τc has a minimum as a function of the solvent quality. With increasing the chain length N, the minimum of τc occurs at a better solvent. Finally, the single exponential distributions of the closure time in poor solvents suggest that the negative excluded volume of segments does not alter the nearly Poisson statistical characteristics of the process of the chain closure.

INTERNATIONAL CONFERENCE ON SEMICONDUCTOR INJECTION LASERS SELCO-87: Liquid phase epitaxial growth of GaInAsP/InP laser structures

NASA Astrophysics Data System (ADS)

Nohavica, D.; Têminová, J.; Berková, D.; Zagrádková, M.; Kortan, I.; Zelinka, I.; Walachová, I.; Malina, V.

1988-11-01

A modified single-phase liquid phase epitaxy method was developed on the basis of a novel variant of the growth boat. The method was used to grow GaInAsP/InP double heterostructures for lasers emitting at 1.3 and 1.55 μm. The main properties of wide-contact diodes (radiation power and threshold current density) were adopted as the characteristics of the quality of heterostructures characterized by different configurations of active and guiding layers. The quality of the structure was confirmed by the fabrication of laser diodes of the following types: stripe with oxide insulation, clad-ridge waveguide, and double-channel planar buried.

Note: Simple hysteresis parameter inspector for camera module with liquid lens

NASA Astrophysics Data System (ADS)

Chen, Po-Jui; Liao, Tai-Shan; Hwang, Chi-Hung

2010-05-01

A method to inspect hysteresis parameter is presented in this article. The hysteresis of whole camera module with liquid lens can be measured rather than a single lens merely. Because the variation in focal length influences image quality, we propose utilizing the sharpness of images which is captured from camera module for hysteresis evaluation. Experiments reveal that the profile of sharpness hysteresis corresponds to the characteristic of contact angle of liquid lens. Therefore, it can infer that the hysteresis of camera module is induced by the contact angle of liquid lens. An inspection process takes only 20 s to complete. Thus comparing with other instruments, this inspection method is more suitable to integrate into the mass production lines for online quality assurance.

An investigation of turbulence structure in a low-Reynolds-number incompressible turbulent boundary

NASA Technical Reports Server (NTRS)

White, B. R.; Strataridakis, C. J.

1987-01-01

An existing high turbulence intensity level (5%) atmospheric boundary-layer wind tunnel has been successfully converted to a relatively low level turbulence (0.3%) wind tunnel through extensive modification, testing, and calibration. A splitter plate was designed, built, and installed into the wind-tunnel facility to create thick, mature, two-dimensional turbulent boundary layer flow at zero pressure gradient. Single and cross hot-wire measurements show turbulent boundary layer characteristics of good quality with unusually large physical size, i.e., viscous sublayer of the order of 1 mm high. These confirm the potential ability of the tunnel to be utilized for future high-quality near-wall turbulent boundary layer measurements. It compares very favorably with many low turbulence research tunnels.

Library construction for next-generation sequencing: Overviews and challenges

PubMed Central

Head, Steven R.; Komori, H. Kiyomi; LaMere, Sarah A.; Whisenant, Thomas; Van Nieuwerburgh, Filip; Salomon, Daniel R.; Ordoukhanian, Phillip

2014-01-01

High-throughput sequencing, also known as next-generation sequencing (NGS), has revolutionized genomic research. In recent years, NGS technology has steadily improved, with costs dropping and the number and range of sequencing applications increasing exponentially. Here, we examine the critical role of sequencing library quality and consider important challenges when preparing NGS libraries from DNA and RNA sources. Factors such as the quantity and physical characteristics of the RNA or DNA source material as well as the desired application (i.e., genome sequencing, targeted sequencing, RNA-seq, ChIP-seq, RIP-seq, and methylation) are addressed in the context of preparing high quality sequencing libraries. In addition, the current methods for preparing NGS libraries from single cells are also discussed. PMID:24502796

Why is quality estimation judgment fast? Comparison of gaze control strategies in quality and difference estimation tasks

NASA Astrophysics Data System (ADS)

Radun, Jenni; Leisti, Tuomas; Virtanen, Toni; Nyman, Göte; Häkkinen, Jukka

2014-11-01

To understand the viewing strategies employed in a quality estimation task, we compared two visual tasks-quality estimation and difference estimation. The estimation was done for a pair of natural images having small global changes in quality. Two groups of observers estimated the same set of images, but with different instructions. One group estimated the difference in quality and the other the difference between image pairs. The results demonstrated the use of different visual strategies in the tasks. The quality estimation was found to include more visual planning during the first fixation than the difference estimation, but afterward needed only a few long fixations on the semantically important areas of the image. The difference estimation used many short fixations. Salient image areas were mainly attended to when these areas were also semantically important. The results support the hypothesis that these tasks' general characteristics (evaluation time, number of fixations, area fixated on) show differences in processing, but also suggest that examining only single fixations when comparing tasks is too narrow a view. When planning a subjective experiment, one must remember that a small change in the instructions might lead to a noticeable change in viewing strategy.

Evaluation techniques and metrics for assessment of pan+MSI fusion (pansharpening)

NASA Astrophysics Data System (ADS)

Mercovich, Ryan A.

2015-05-01

Fusion of broadband panchromatic data with narrow band multispectral data - pansharpening - is a common and often studied problem in remote sensing. Many methods exist to produce data fusion results with the best possible spatial and spectral characteristics, and a number have been commercially implemented. This study examines the output products of 4 commercial implementations with regard to their relative strengths and weaknesses for a set of defined image characteristics and analyst use-cases. Image characteristics used are spatial detail, spatial quality, spectral integrity, and composite color quality (hue and saturation), and analyst use-cases included a variety of object detection and identification tasks. The imagery comes courtesy of the RIT SHARE 2012 collect. Two approaches are used to evaluate the pansharpening methods, analyst evaluation or qualitative measure and image quality metrics or quantitative measures. Visual analyst evaluation results are compared with metric results to determine which metrics best measure the defined image characteristics and product use-cases and to support future rigorous characterization the metrics' correlation with the analyst results. Because pansharpening represents a trade between adding spatial information from the panchromatic image, and retaining spectral information from the MSI channels, the metrics examined are grouped into spatial improvement metrics and spectral preservation metrics. A single metric to quantify the quality of a pansharpening method would necessarily be a combination of weighted spatial and spectral metrics based on the importance of various spatial and spectral characteristics for the primary task of interest. Appropriate metrics and weights for such a combined metric are proposed here, based on the conducted analyst evaluation. Additionally, during this work, a metric was developed specifically focused on assessment of spatial structure improvement relative to a reference image and independent of scene content. Using analysis of Fourier transform images, a measure of high-frequency content is computed in small sub-segments of the image. The average increase in high-frequency content across the image is used as the metric, where averaging across sub-segments combats the scene dependent nature of typical image sharpness techniques. This metric had an improved range of scores, better representing difference in the test set than other common spatial structure metrics.

Sleep disorders, depressive symptoms and health-related quality of life--a cross-sectional comparison between kidney transplant recipients and waitlisted patients on maintenance dialysis.

PubMed

Kovacs, Agnes Zsofia; Molnar, Miklos Zsolt; Szeifert, Lilla; Ambrus, Csaba; Molnar-Varga, Marta; Szentkiralyi, Andras; Mucsi, Istvan; Novak, Marta

2011-03-01

Kidney transplantation is believed to improve health-related quality of life (HRQoL) of patients requiring renal replacement therapy (RRT). Recent studies suggested that the observed difference in HRQoL between kidney transplant recipients (Tx) vs patients treated with dialysis may reflect differences in patient characteristics. We tested if Tx patients have better HRQoL compared to waitlisted (WL) patients treated with dialysis after extensive adjustment for covariables. Eight hundred and eighty-eight prevalent Tx patients followed at a single outpatient transplant clinic and 187 WL patients treated with maintenance dialysis in nine dialysis centres were enrolled in this observational cross-sectional study. Data about socio-demographic and clinical parameters, self-reported depressive symptoms and the most frequent sleep disorders assessed by self-reported questionnaires were collected at enrollment. HRQoL was assessed by the Kidney Disease Quality of Life Questionnaire. Patient characteristics were similar in the Tx vs WL groups: the proportion of males (58 vs 60%), mean ± SD age (49 ± 13 vs 49 ± 12) and proportion of diabetics (17 vs 18%), respectively, were all similar. Tx patients had significantly better HRQoL scores compared to the WL group both in generic (Physical function, General health perceptions, Energy/fatigue, Emotional well-being) and in kidney disease-specific domains (Symptoms/problems, Effect- and Burden of kidney disease and Sleep). In multivariate regression models adjusting for clinical and socio-demographic characteristics, sleep disorders and depressive symptoms, the modality of RRT (WL vs Tx) remained independently associated with three (General health perceptions, Effect- and Burden of kidney disease) out of the eight HRQoL dimensions analysed. Kidney Tx recipients have significantly better HRQoL compared to WL dialysis patients in some, but not all, dimensions of quality of life after accounting for differences in patient characteristics. Utilizing multidimensional disease-specific questionnaires will allow better understanding of treatment, disease and patient-related factors potentially affecting quality of life in patients with chronic medical conditions.

Comparison of Models for Spacer Grid Pressure Loss in Nuclear Fuel Bundles for One and Two-Phase Flows

NASA Astrophysics Data System (ADS)

Maskal, Alan B.

Spacer grids maintain the structural integrity of the fuel rods within fuel bundles of nuclear power plants. They can also improve flow characteristics within the nuclear reactor core. However, spacer grids add reactor coolant pressure losses, which require estimation and engineering into the design. Several mathematical models and computer codes were developed over decades to predict spacer grid pressure loss. Most models use generalized characteristics, measured by older, less precise equipment. The study of OECD/US-NRC BWR Full-Size Fine Mesh Bundle Tests (BFBT) provides updated and detailed experimental single and two-phase results, using technically advanced flow measurements for a wide range of boundary conditions. This thesis compares the predictions from the mathematical models to the BFBT experimental data by utilizing statistical formulae for accuracy and precision. This thesis also analyzes the effects of BFBT flow characteristics on spacer grids. No single model has been identified as valid for all flow conditions. However, some models' predictions perform better than others within a range of flow conditions, based on the accuracy and precision of the models' predictions. This study also demonstrates that pressure and flow quality have a significant effect on two-phase flow spacer grid models' biases.

Determinants of community pharmacists' quality of care: a population-based cohort study using pharmacy administrative claims data.

PubMed

Winslade, Nancy; Tamblyn, Robyn

2017-09-21

To determine if a prototype pharmacists' services evaluation programme that uses linked community pharmacy claims and health administrative data to measure pharmacists' performance can be used to identify characteristics of pharmacies providing higher quality of care. Population-based cohort study using community pharmacy claims from 1 November 2009 to 30 June 2010. All community pharmacies in Quebec, Canada. 1742 pharmacies dispensing 8 655 348 antihypertensive prescriptions to 760 700 patients. Patient adherence to antihypertensive medications. Pharmacy level: dispensing workload, volume of pharmacist-provided professional services (eg, refusals to dispense, pharmacotherapy recommendations), pharmacy location, banner/chain, pharmacist overlap and within-pharmacy continuity of care. Patient level: sex, age, income, patient prescription cost, new/chronic therapy, single/multiple antihypertensive medications, single/multiple prescribers and single/multiple dispensing pharmacies. Dispensing level: prescription duration, time of day dispensed and antihypertensive class. Multivariate alternating logistic regression estimated predictors of the primary outcome, accounting for patient and pharmacy clustering. 9.2% of dispensings of antihypertensive medications were provided to non-adherent patients. Male sex, decreasing age, new treatment, multiple prescribers and multiple dispensing pharmacies were risk factors for increased non-adherence. Pharmacies that provided more professional services were less likely to dispense to non-adherent hypertensive patients (OR: 0.60; 95% CI: 0.57 to 0.62) as were those with better scores on the Within-Pharmacy Continuity of Care Index. Neither increased pharmacists' services for improving antihypertensive adherence per se nor increased pharmacist overlap impacted the odds of non-adherence. However, pharmacist overlap was strongly correlated with dispensing workload. There was significant unexplained variability among pharmacies belonging to different banners and chains. Pharmacy administrative claims data can be used to calculate pharmacy-level characteristics associated with improved quality of care. This study supports the importance of pharmacist's professional services and continuity of pharmacist's care. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The influence of system quality characteristics on health care providers' performance: Empirical evidence from Malaysia.

PubMed

Mohd Salleh, Mohd Idzwan; Zakaria, Nasriah; Abdullah, Rosni

The Ministry of Health Malaysia initiated the total hospital information system (THIS) as the first national electronic health record system for use in selected public hospitals across the country. Since its implementation 15 years ago, there has been the critical requirement for a systematic evaluation to assess its effectiveness in coping with the current system, task complexity, and rapid technological changes. The study aims to assess system quality factors to predict the performance of electronic health in a single public hospital in Malaysia. Non-probability sampling was employed for data collection among selected providers in a single hospital for two months. Data cleaning and bias checking were performed before final analysis in partial least squares-structural equation modeling. Convergent and discriminant validity assessments were satisfied the required criterions in the reflective measurement model. The structural model output revealed that the proposed adequate infrastructure, system interoperability, security control, and system compatibility were the significant predictors, where system compatibility became the most critical characteristic to influence an individual health care provider's performance. The previous DeLone and McLean information system success models should be extended to incorporate these technological factors in the medical system research domain to examine the effectiveness of modern electronic health record systems. In this study, care providers' performance was expected when the system usage fits with patients' needs that eventually increased their productivity. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

Dependence in Alzheimer's disease and service use costs, quality of life, and caregiver burden: the DADE study.

PubMed

Jones, Roy W; Romeo, Renee; Trigg, Richard; Knapp, Martin; Sato, Azusa; King, Derek; Niecko, Timothy; Lacey, Loretto

2015-03-01

Most models determining how patient and caregiver characteristics and costs change with Alzheimer's disease (AD) progression focus on one aspect, for example, cognition. AD is inadequately defined by a single domain; tracking progression by focusing on a single aspect may mean other important aspects are insufficiently addressed. Dependence has been proposed as a better marker for following disease progression. This was a cross-sectional observational study (18 UK sites). Two hundred forty-nine community or institutionalized patients, with possible/probable AD, Mini-Mental State Examination (3-26), and a knowledgeable informant participated. Significant associations noted between dependence (Dependence Scale [DS]) and clinical measures of severity (cognition, function, and behavior). Bivariate and multivariate models demonstrated significant associations between DS and service use cost, patient quality of life, and caregiver perceived burden. The construct of dependence may help to translate the combined impact of changes in cognition, function, and behavior into a more readily interpretable form. The DS is useful for assessing patients with AD in clinical trials/research. Copyright © 2015 The Alzheimer's Association. Published by Elsevier Inc. All rights reserved.

Single-crystalline aluminum film for ultraviolet plasmonic nanolasers

PubMed Central

Chou, Bo-Tsun; Chou, Yu-Hsun; Wu, Yen-Mo; Chung, Yi-Cheng; Hsueh, Wei-Jen; Lin, Shih-Wei; Lu, Tien-Chang; Lin, Tzy-Rong; Lin, Sheng-Di

2016-01-01

Significant advances have been made in the development of plasmonic devices in the past decade. Plasmonic nanolasers, which display interesting properties, have come to play an important role in biomedicine, chemical sensors, information technology, and optical integrated circuits. However, nanoscale plasmonic devices, particularly those operating in the ultraviolet regime, are extremely sensitive to the metal and interface quality. Thus, these factors have a significant bearing on the development of ultraviolet plasmonic devices. Here, by addressing these material-related issues, we demonstrate a low-threshold, high-characteristic-temperature metal-oxide-semiconductor ZnO nanolaser that operates at room temperature. The template for the ZnO nanowires consists of a flat single-crystalline Al film grown by molecular beam epitaxy and an ultrasmooth Al2O3 spacer layer synthesized by atomic layer deposition. By effectively reducing the surface plasmon scattering and metal intrinsic absorption losses, the high-quality metal film and the sharp interfaces formed between the layers boost the device performance. This work should pave the way for the use of ultraviolet plasmonic nanolasers and related devices in a wider range of applications. PMID:26814581

Effects of different Pediococcus halophilus level and fermentation time on chemical properties of fermented anchovy paste “terasi ikan”

NASA Astrophysics Data System (ADS)

Lestari, S. D.; Herpandi; Simamora, G. R. R.

2017-04-01

The aim of this study was to investigate the Pediococcus halophilus addition on the chemical quality of terasi ikan (fermented anchovy paste) product. Two levels of bacterial concentration (106 CFU/mL and 109 CFU/mL) were used as a single starter culture for the fermentation process. Changes in chemical characteristics were observed at day 7, 14 and 21. No differences (p > 0.05) in moisture and protein content were found in the analysis of variance within terasi ikan samples. The decrease in reducing sugar and L-lysine HCl during the fermentation was attributed to the formation of Maillard Reaction Products (MRPs) which was manifested in dark brown color of the end products. The interaction between P. halophilus and terasi ikan microbiota as well as their enzymatic activities were considered to affect vitamin B synthesis and degradation of protein into amino acids and amines. These findings facilitate further investigations on using P. halophilus as constituent of mixed culture, instead of as a single culture for terasi industry in order to produce products of well-controlled quality and safety.

Top-seeded solution growth of SrTiO3 single crystals virtually free of mosaicity

NASA Astrophysics Data System (ADS)

Guguschev, Christo; Kok, Dirk J.; Juda, Uta; Uecker, Reinhard; Sintonen, Sakari; Galazka, Zbigniew; Bickermann, Matthias

2017-06-01

Strontium titanate (SrTiO3), a well-established traditional perovskite substrate as well as a promising substrate crystal for the epitaxy of new advanced perovskite-type thin films, suffers from the unavailability in adequate quality for the latter. To improve the situation attempts have been made to grow SrTiO3 at moderate temperatures (<1535 °C) well below the melting temperature and under low temperature gradients by the top-seeded solution growth method. Based on very special modifications of the growth conditions, virtually mosaicity-free SrTiO3 single crystals in the 1-2 cm range were obtained. High crystalline quality was verified by defect selective etching, rocking curve measurements, energy dispersive Laue mappings and by synchrotron X-Ray diffraction topography. The production of virtually subgrain- and dislocation free substrate crystals is essential to considerably improve characteristics of SrTiO3 based SQUIDs, transistors or memory devices and to allow an in-depth analysis of intrinsic and extrinsic factors influencing the properties of epitaxially grown oxide heterostructures.

Characteristics, Quality and Contribution to Signal Detection of Spontaneous Reports of Adverse Drug Reactions Via the WEB-RADR Mobile Application: A Descriptive Cross-Sectional Study.

PubMed

Oosterhuis, Ingrid; Taavola, Henric; Tregunno, Philip M; Mas, Petar; Gama, Sara; Newbould, Victoria; Caster, Ola; Härmark, Linda

2018-05-14

Spontaneous reporting of suspected adverse drug reactions is key for efficient post-marketing safety surveillance. To increase usability and accessibility of reporting tools, the Web-Recognising Adverse Drug Reactions (WEB-RADR) consortium developed a smartphone application (app) based on a simplified reporting form. The objective of this study was to evaluate the characteristics, quality and contribution to signals of reports submitted via the WEB-RADR app. The app was launched in the UK, the Netherlands and Croatia between July 2015 and May 2016. Spontaneous reports submitted until September 2016 with a single reporter were included. For each country, app reports and reports received through conventional means in the same time period were compared to identify characteristic features. A random subset of reports was assessed for clinical quality and completeness. The contribution to signal detection was assessed by a descriptive analysis. Higher proportions of app reports were submitted by patients in the UK (28 vs. 18%) and Croatia (32 vs. 7%); both p < 0.01. In the Netherlands, the difference was small (60 vs. 57%; p = 0.5). The proportion of female patients and the median patient ages in app reports submitted by patients were similar to the reference. The proportion of reports of at least moderate quality was high in both samples (app: 78-85%, reference: 78-98%), for all countries. App reports contributed to detecting eight potential safety signals at the national level, four of which were eventually signalled. The WEB-RADR app offers a new route of spontaneous reporting that shows promise in attracting reports from patients and that could become an important tool in the future. Patient demographics are similar to conventional routes, report quality is sufficient despite a simplified reporting form, and app reports show potential in contributing to signal detection.

Effects of suckling duration on growth, slaughtering and carcass quality characteristics of Kivircik lambs.

PubMed

Ekiz, Bulent; Kocak, Omur; Yalcintan, Hulya; Yilmaz, Alper

2016-02-01

Effects of suckling length (45, 75 and 120 days) and birth type (single and twin) on lamb growth, slaughtering and carcass quality characteristics were investigated using 40 Kivircik lambs. SC-45 and SC-75 lambs were weaned at 45 and 75 days of age, respectively, whilst SC-120 lambs remained with their mothers until the end of the experimental period. Lambs from all studied groups were slaughtered at 120 days of age. Weaning treatment caused a decrease in average daily gain in SC-45 and SC-75 lambs, and therefore, final weight was higher in SC-120 lambs than lambs from weaned groups. SC-120 lambs had higher empty body weight, cold carcass weight, dressing percentage, carcass measurements, carcass fatness (proportions of the kidney knob and channel fat, subcutaneous and intramuscular fat in pelvic limb) and non-carcass fatness (omental and mesenteric fat proportion) than weaned lambs. As a conclusion, the potential losses in meat production due to weaning should be considered before deciding the weaning of lambs at early ages.

Multi-objective optimization of laser-scribed micro grooves on AZO conductive thin film using Data Envelopment Analysis

NASA Astrophysics Data System (ADS)

Kuo, Chung-Feng Jeffrey; Quang Vu, Huy; Gunawan, Dewantoro; Lan, Wei-Luen

2012-09-01

Laser scribing process has been considered as an effective approach for surface texturization on thin film solar cell. In this study, a systematic method for optimizing multi-objective process parameters of fiber laser system was proposed to achieve excellent quality characteristics, such as the minimum scribing line width, the flattest trough bottom, and the least processing edge surface bumps for increasing incident light absorption of thin film solar cell. First, the Taguchi method (TM) obtained useful statistical information through the orthogonal array with relatively fewer experiments. However, TM is only appropriate to optimize single-objective problems and has to rely on engineering judgment for solving multi-objective problems that can cause uncertainty to some degree. The back-propagation neural network (BPNN) and data envelopment analysis (DEA) were utilized to estimate the incomplete data and derive the optimal process parameters of laser scribing system. In addition, analysis of variance (ANOVA) method was also applied to identify the significant factors which have the greatest effects on the quality of scribing process; in other words, by putting more emphasis on these controllable and profound factors, the quality characteristics of the scribed thin film could be effectively enhanced. The experiments were carried out on ZnO:Al (AZO) transparent conductive thin film with a thickness of 500 nm and the results proved that the proposed approach yields better anticipated improvements than that of the TM which is only superior in improving one quality while sacrificing the other qualities. The results of confirmation experiments have showed the reliability of the proposed method.

Relationship between quality of care and choice of clinical computing system: retrospective analysis of family practice performance under the UK's quality and outcomes framework

PubMed Central

Kontopantelis, Evangelos; Buchan, Iain; Reeves, David; Checkland, Kath; Doran, Tim

2013-01-01

Objectives To investigate the relationship between performance on the UK Quality and Outcomes Framework pay-for-performance scheme and choice of clinical computer system. Design Retrospective longitudinal study. Setting Data for 2007–2008 to 2010–2011, extracted from the clinical computer systems of general practices in England. Participants All English practices participating in the pay-for-performance scheme: average 8257 each year, covering over 99% of the English population registered with a general practice. Main outcome measures Levels of achievement on 62 quality-of-care indicators, measured as: reported achievement (levels of care after excluding inappropriate patients); population achievement (levels of care for all patients with the relevant condition) and percentage of available quality points attained. Multilevel mixed effects multiple linear regression models were used to identify population, practice and clinical computing system predictors of achievement. Results Seven clinical computer systems were consistently active in the study period, collectively holding approximately 99% of the market share. Of all population and practice characteristics assessed, choice of clinical computing system was the strongest predictor of performance across all three outcome measures. Differences between systems were greatest for intermediate outcomes indicators (eg, control of cholesterol levels). Conclusions Under the UK's pay-for-performance scheme, differences in practice performance were associated with the choice of clinical computing system. This raises the question of whether particular system characteristics facilitate higher quality of care, better data recording or both. Inconsistencies across systems need to be understood and addressed, and researchers need to be cautious when generalising findings from samples of providers using a single computing system. PMID:23913774

High-Performance Sensors Based on Resistance Fluctuations of Single-Layer-Graphene Transistors.

PubMed

Amin, Kazi Rafsanjani; Bid, Aveek

2015-09-09

One of the most interesting predicted applications of graphene-monolayer-based devices is as high-quality sensors. In this article, we show, through systematic experiments, a chemical vapor sensor based on the measurement of low-frequency resistance fluctuations of single-layer-graphene field-effect-transistor devices. The sensor has extremely high sensitivity, very high specificity, high fidelity, and fast response times. The performance of the device using this scheme of measurement (which uses resistance fluctuations as the detection parameter) is more than 2 orders of magnitude better than a detection scheme in which changes in the average value of the resistance is monitored. We propose a number-density-fluctuation-based model to explain the superior characteristics of a noise-measurement-based detection scheme presented in this article.

Wf/pc Cycle 2 Calib: Measles Monitor

NASA Astrophysics Data System (ADS)

MacKenty, John

1991-07-01

This program takes "uniform illuminated" pictures of the earth to monitor the measles effect observed in WFPC observations. The goals of this program are: 1. Look for changes in measle numbers/characteristics 2. Have before/after images in place for decontaminations. This program will also build up a high quality flat field. The observations are done only with PC with a frequency of once every two weeks. The sequence (during a single earth occultation) is: F517N+OPEN, F517N+F122M, F517N+OPEN

Structural relations in the effect of convenience food satisfaction and quality of life according to dietary style: Comparative study of singles in metropolitan area of Korea, Japan and China.

PubMed

Kim, Boram; Joo, Nami

2014-06-01

Due to recent changes in social structure, single-person households are on the rise worldwide and therefore the interest in the quality of life of singles is increasing, but the research on the relationships related to their diet-related quality of life is scarce. This research analyzes the structural relations in the effect of convenience food satisfaction and quality of life according to dietary style of Korean, Japanese and Chinese singles. The targets of this study were Korean, Japanese, and Chinese singles, identified as adults between the ages of 25 and 54, having economic capabilities or working and living alone, either legally or in actuality having no partner. A statistical analysis was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. The reliability of these findings was supported by a Cronbach's alpha coefficient of 0.6 and higher for all the factors. In an attempt to study the level of satisfaction with convenience food in accordance to dietary style and the quality of life of singles, a structural equation model was constructed and analyzed. Of the three countries, regarding the effect of dietary style on singles' quality of life, the convenience-oriented style was found to have a negative effect on Korean singles' overall quality of life, but a positive effect on Japanese singles' overall quality of life, and a negative effect on Chinese singles' positive psychological aspect of quality of life. In addition, although Chinese singles have a high level of interest in health, they have an overall high level of satisfaction regarding fast food and its nutritional value. The number of singles in Korea, Japan, and China has been consistently increasing in recent years, and there is a need for continuous interest in their healthy dietary lifestyles in terms of convenience, economy, and taste.

Structural relations in the effect of convenience food satisfaction and quality of life according to dietary style: Comparative study of singles in metropolitan area of Korea, Japan and China

PubMed Central

Kim, Boram

2014-01-01

BACKGROUND/OBJECTIVES Due to recent changes in social structure, single-person households are on the rise worldwide and therefore the interest in the quality of life of singles is increasing, but the research on the relationships related to their diet-related quality of life is scarce. This research analyzes the structural relations in the effect of convenience food satisfaction and quality of life according to dietary style of Korean, Japanese and Chinese singles. SUBJECTS/METHODS The targets of this study were Korean, Japanese, and Chinese singles, identified as adults between the ages of 25 and 54, having economic capabilities or working and living alone, either legally or in actuality having no partner. A statistical analysis was conducted using SPSS12.0 for Windows and SEM using AMOS 5.0 statistics package. The reliability of these findings was supported by a Cronbach's alpha coefficient of 0.6 and higher for all the factors. In an attempt to study the level of satisfaction with convenience food in accordance to dietary style and the quality of life of singles, a structural equation model was constructed and analyzed. RESULTS Of the three countries, regarding the effect of dietary style on singles' quality of life, the convenience-oriented style was found to have a negative effect on Korean singles' overall quality of life, but a positive effect on Japanese singles' overall quality of life, and a negative effect on Chinese singles' positive psychological aspect of quality of life. In addition, although Chinese singles have a high level of interest in health, they have an overall high level of satisfaction regarding fast food and its nutritional value. CONCLUSIONS The number of singles in Korea, Japan, and China has been consistently increasing in recent years, and there is a need for continuous interest in their healthy dietary lifestyles in terms of convenience, economy, and taste. PMID:24944777

Application of Nemerow Index Method and Integrated Water Quality Index Method in Water Quality Assessment of Zhangze Reservoir

NASA Astrophysics Data System (ADS)

Zhang, Qian; Feng, Minquan; Hao, Xiaoyan

2018-03-01

[Objective] Based on the water quality historical data from the Zhangze Reservoir from the last five years, the water quality was assessed by the integrated water quality identification index method and the Nemerow pollution index method. The results of different evaluation methods were analyzed and compared and the characteristics of each method were identified.[Methods] The suitability of the water quality assessment methods were compared and analyzed, based on these results.[Results] the water quality tended to decrease over time with 2016 being the year with the worst water quality. The sections with the worst water quality were the southern and northern sections.[Conclusion] The results produced by the traditional Nemerow index method fluctuated greatly in each section of water quality monitoring and therefore could not effectively reveal the trend of water quality at each section. The combination of qualitative and quantitative measures of the comprehensive pollution index identification method meant it could evaluate the degree of water pollution as well as determine that the river water was black and odorous. However, the evaluation results showed that the water pollution was relatively low.The results from the improved Nemerow index evaluation were better as the single indicators and evaluation results are in strong agreement; therefore the method is able to objectively reflect the water quality of each water quality monitoring section and is more suitable for the water quality evaluation of the reservoir.

Gender Differences in Physical Performance Characteristics of Elite Surfers.

PubMed

Parsonage, Joanna R; Secomb, Josh L; Tran, Tai T; Farley, Oliver R L; Nimphius, Sophia; Lundgren, Lina; Sheppard, Jeremy M

2017-09-01

Parsonage, JR, Secomb, JL, Tran, TT, Farley, ORL, Nimphius, S, Lundgren, L, and Sheppard, JM. Gender differences in physical performance characteristics of elite surfers. J Strength Cond Res 31(9): 2417-2422, 2017-The purpose of this study was to describe and compare the gender differences in physical performance characteristics of elite surfers. Twenty competitive female surfers (CFS) and 20 competitive male surfers (CMS) performed a battery of physical performance tests: squat jump (SJ), isometric midthigh pull (IMTP), 15-m sprint paddle, and 400-m endurance paddle during a single testing session. All performance measures were significantly different between CFS and CMS (p < 0.01). Specifically, CMS produced greater peak force production (28.5%) and jumped higher (27.7%) in the SJ and produced greater normalized peak force during the IMTP (18.9%) compared with CFS. For paddling performance, CMS were faster over 5, 10, and 15 m (12.4%, 9.7%, and 10.9%), possessed a higher peak paddling velocity (11.3%), and recorded faster paddle times over 400 m (11.8%). The results of this study suggest that CMS exhibit superior physical performance characteristics than CFS, in relation to both the lower and upper body. Strength and conditioning practitioners should therefore implement a structured and periodized program to facilitate strength qualities that underpin surfing performance for all participants, but as highlighted in the current investigation, female surfers may have a greater window for adaptation and therefore vast benefit of targeting their underdeveloped physical qualities.

Improved model for detection of homogeneous production batches of electronic components

NASA Astrophysics Data System (ADS)

Kazakovtsev, L. A.; Orlov, V. I.; Stashkov, D. V.; Antamoshkin, A. N.; Masich, I. S.

2017-10-01

Supplying the electronic units of the complex technical systems with electronic devices of the proper quality is one of the most important problems for increasing the whole system reliability. Moreover, for reaching the highest reliability of an electronic unit, the electronic devices of the same type must have equal characteristics which assure their coherent operation. The highest homogeneity of the characteristics is reached if the electronic devices are manufactured as a single production batch. Moreover, each production batch must contain homogeneous raw materials. In this paper, we propose an improved model for detecting the homogeneous production batches of shipped lot of electronic components based on implementing the kurtosis criterion for the results of non-destructive testing performed for each lot of electronic devices used in the space industry.

Evaluating the performance of active noise control systems in commercial and industrial applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Depies, C.; Deneen, S.; Lowe, M.

1995-06-01

Active sound cancellation technology is increasingly being used to quiet commercial and industrial air-moving devices. Engineers and designers are implementing active or combination active/passive technology to control sound quality in the workplace and the acoustical environment in residential areas near industrial facilities. Sound level measurements made before and after the installation of active systems have proved that significant improvements in sound quality can be obtained even if there is little or no change in the NC/RC or dBA numbers. Noise produced by centrifugal and vane-axial fans, pumps and blowers, commonly used for ventilation and material movement in industry, are frequentlymore » dominated by high amplitude, tonal noise at low frequencies. And the low-frequency noise produced by commercial air handlers often has less tonal and more broadband characteristics, resulting in audible duct rumble noise and objectionable room spectrums. Because the A-weighting network, which is commonly used for industrial noise measurements, de-emphasizes low frequencies, its single number rating can be misleading in terms of judging the overall subjective sound quality in impacted areas and assessing the effectiveness of noise control measures. Similarly, NC values, traditionally used for commercial HVAC acoustical design criteria, can be governed by noise at any frequency and cannot accurately depict human judgment of the aural comfort level. Analyses of frequency spectrum characteristics provide the most effective means of assessing sound quality and determining mitigative measures for achieving suitable background sound levels.« less

Flying Qualities Evaluation of a Commuter Aircraft With an Ice Contaminated Tailplane

NASA Technical Reports Server (NTRS)

Ranaudo, Richard J.; Ratvasky, Thomas P.; FossVanZante, Judith

2000-01-01

During the NASA/FAA (Federal Aviation Administration) Tailplane Icing Program, pilot evaluations of aircraft flying qualities were conducted with various ice shapes attached to the horizontal tailplane of the NASA Twin Otter Icing Research Aircraft. Initially, only NASA pilots conducted these evaluations, assessing the differences in longitudinal flight characteristics between the baseline or clean aircraft, and the aircraft configured with an Ice Contaminated Tailplane (ICT). Longitudinal tests included Constant Airspeed Flap Transitions, Constant Airspeed Thrust Transitions, zero-G Pushovers, Repeat Elevator Doublets, and Simulated Approach and Go-Around tasks. Later in the program, guest pilots from government and industry were invited to fly the NASA Twin Otter configured with a single full-span artificial ice shape attached to the leading edge of the horizontal tailplane. This shape represented ice formed due to a 'Failed Boot' condition, and was generated from tests in the Glenn Icing Research Tunnel on a full-scale tailplane model. Guest pilots performed longitudinal handling tests, similar to those conducted by the NASA pilots, to evaluate the ICT condition. In general, all pilots agreed that longitudinal flying qualities were degraded as flaps were lowered, and further degraded at high thrust settings. Repeat elevator doublets demonstrated reduced pitch damping effects due to ICT, which is a characteristic that results in degraded flying qualities. Pilots identified elevator control force reversals (CFR) in zero-G pushovers at a 20 deg flap setting, a characteristic that fails the FAR 25 no CFR certification requirement. However, when the same pilots used the Cooper-Harper rating scale to perform a simulated approach and go-around task at the 20 deg flap setting, they rated the airplane as having Level I and Level II flying qualities respectively. By comparison, the same task conducted at the 30 deg flap setting, resulted in Level II flying qualities for the approach portion, and Level III for the go-around portion.The results of this program indicate that safe and acceptable flying qualities with an ICT condition, can be effectively assessed by task-oriented pilot maneuvers. In addition, other maneuvers such as repeat elevator doublets provide good qualitative and quantitative assessments of pitch damping and elevator effectiveness, which are characteristics that correlate well with pilot task ratings. The results of this testing indicate that the FAR 25 zero-G pushover maneuver, which requires no CFR during its execution, may be an overly conservative pass/fail criteria for aircraft certification.

The quality of life of single mothers making the transition from welfare to work.

PubMed

Cook, Kay; Davis, Elise; Smyth, Paul; McKenzie, Hayley

2009-09-01

This study examined the quality of life of single mothers making the mandatory transition from welfare to work. The Australian government purported that the benefits of making this transition would include higher incomes, better social participation, and improved wellbeing. It is currently unknown, however, how single mothers currently engaged in welfare to work programs evaluate their quality of life. Quality of life scores for 334 single mothers engaged in welfare to work in Australia were compared with normative data. Participants reported significantly lower quality of life scores than the general population for all quality of life domains, highlighting the need to carefully examine welfare to work policies to ensure they promote participants' quality of life.

Scatter measurement and correction method for cone-beam CT based on single grating scan

NASA Astrophysics Data System (ADS)

Huang, Kuidong; Shi, Wenlong; Wang, Xinyu; Dong, Yin; Chang, Taoqi; Zhang, Hua; Zhang, Dinghua

2017-06-01

In cone-beam computed tomography (CBCT) systems based on flat-panel detector imaging, the presence of scatter significantly reduces the quality of slices. Based on the concept of collimation, this paper presents a scatter measurement and correction method based on single grating scan. First, according to the characteristics of CBCT imaging, the scan method using single grating and the design requirements of the grating are analyzed and figured out. Second, by analyzing the composition of object projection images and object-and-grating projection images, the processing method for the scatter image at single projection angle is proposed. In addition, to avoid additional scan, this paper proposes an angle interpolation method of scatter images to reduce scan cost. Finally, the experimental results show that the scatter images obtained by this method are accurate and reliable, and the effect of scatter correction is obvious. When the additional object-and-grating projection images are collected and interpolated at intervals of 30 deg, the scatter correction error of slices can still be controlled within 3%.

Influence of VO2+ ions on structural and optical properties of potassium succinate-succinic acid single crystal for non-linear optical applications

NASA Astrophysics Data System (ADS)

Juliet sheela, K.; Subramanian, P.

2018-04-01

A transparent and good optical quality semi organic single crystal of vanadium doped potassium succinate-succinic acid (KSSA) was synthesized by slow evaporation technique at room temperature. The structural perfection was supported by the powder XRD of the KSSA-VO2+ single crystal. Optical behavior of the material was discovered from the absorption and transmission spectra of UV-vis-NIR characterization. Functional group and presence of metal ion in the specimen are depicted from FTIR traces. From the photoluminescence studies, emission of wavelength in the violet region (418 nm) at the excitation of 243 nm could be ascertained. EDAX, SEM measurements identify presence of elements and pictures the step-line growth and the imperfection presents in the grown crystal. EPR analysis extracts the information about the local site symmetry around the impurity ion, molecular orbital coefficients, admixture coefficients and ground state wave function of VO2+ doped KSSA single crystal. Second harmonic generation (SHG) efficiency of the grown crystal was investigated to explore the NLO characteristic of the material.

A Strategic Study about Quality Characteristics in e-Health Systems Based on a Systematic Literature Review.

PubMed

Domínguez-Mayo, F J; Escalona, M J; Mejías, M; Aragón, G; García-García, J A; Torres, J; Enríquez, J G

2015-01-01

e-Health Systems quality management is an expensive and hard process that entails performing several tasks such as analysis, evaluation, and quality control. Furthermore, the development of an e-Health System involves great responsibility since people's health and quality of life depend on the system and services offered. The focus of the following study is to identify the gap in Quality Characteristics for e-Health Systems, by detecting not only which are the most studied, but also which are the most used Quality Characteristics these Systems include. A strategic study is driven in this paper by a Systematic Literature Review so as to identify Quality Characteristics in e-Health. Such study makes information and communication technology organizations reflect and act strategically to manage quality in e-Health Systems efficiently and effectively. As a result, this paper proposes the bases of a Quality Model and focuses on a set of Quality Characteristics to enable e-Health Systems quality management. Thus, we can conclude that this paper contributes to implementing knowledge with regard to the mission and view of e-Health (Systems) quality management and helps understand how current researches evaluate quality in e-Health Systems.

A Strategic Study about Quality Characteristics in e-Health Systems Based on a Systematic Literature Review

PubMed Central

Escalona, M. J.; Mejías, M.; Aragón, G.; García-García, J. A.; Torres, J.; Enríquez, J. G.

2015-01-01

e-Health Systems quality management is an expensive and hard process that entails performing several tasks such as analysis, evaluation, and quality control. Furthermore, the development of an e-Health System involves great responsibility since people's health and quality of life depend on the system and services offered. The focus of the following study is to identify the gap in Quality Characteristics for e-Health Systems, by detecting not only which are the most studied, but also which are the most used Quality Characteristics these Systems include. A strategic study is driven in this paper by a Systematic Literature Review so as to identify Quality Characteristics in e-Health. Such study makes information and communication technology organizations reflect and act strategically to manage quality in e-Health Systems efficiently and effectively. As a result, this paper proposes the bases of a Quality Model and focuses on a set of Quality Characteristics to enable e-Health Systems quality management. Thus, we can conclude that this paper contributes to implementing knowledge with regard to the mission and view of e-Health (Systems) quality management and helps understand how current researches evaluate quality in e-Health Systems. PMID:26146656

48 CFR 846.408 - Single-agency assignments of Government contract quality assurance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of Government contract quality assurance. 846.408 Section 846.408 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 846.408 Single-agency assignments of Government contract quality assurance. ...

Influence of extrusion-cooking parameters on some quality aspects of precooked pasta-like products.

PubMed

Wójtowicz, A; Mościcki, L

2009-06-01

The present article aims to evaluate some quality parameters and texture characteristics of precooked wheat pasta-like products. Using the methods for pasta and instant noodles the tested parameters were water absorption, starch gelatinization degree, cooking losses, and hardness. The texture profile was characterized using Zwick apparatus by cutting test with the head speed of 10 mm/min and expressed as hardness and firmness of hydrated products. SEM pictures were used to illustrate the internal structure of dry and cooked pasta-like products. Dough moisture content and process conditions influenced all tested quality parameters of the pasta-like products processed on a modified single screw extrusion-cooker TS-45 with L: D = 16: 1. Good organoleptical quality (notes higher than 4 in a 5-point scale) and firm texture were observed for common wheat flour pasta processed at 30% m.c. Hardness and firmness of hydrated products lowered with a longer hydration time in hot water. The firmest texture and low stickiness was observed for products with a highest starch gelatinization degree.

Dual-energy CT and ceramic or titanium prostheses material reduce CT artifacts and provide superior image quality of total knee arthroplasty.

PubMed

Kasparek, Maximilian F; Töpker, Michael; Lazar, Mathias; Weber, Michael; Kasparek, Michael; Mang, Thomas; Apfaltrer, Paul; Kubista, Bernd; Windhager, Reinhard; Ringl, Helmut

2018-06-07

To evaluate the influence of different scan parameters for single-energy CT and dual-energy CT, as well as the impact of different material used in a TKA prosthesis on image quality and the extent of metal artifacts. Eight pairs of TKA prostheses from different vendors were examined in a phantom set-up. Each pair consisted of a conventional CoCr prosthesis and the corresponding anti-allergic prosthesis (full titanium, ceramic, or ceramic-coated) from the same vendor. Nine different (seven dual-energy CT and two single-energy CT) scan protocols with different characteristics were used to determine the most suitable CT protocol for TKA imaging. Quantitative image analysis included assessment of blooming artifacts (metal implants appear thicker on CT than they are, given as virtual growth in mm in this paper) and streak artifacts (thick dark lines around metal). Qualitative image analysis was used to investigate the bone-prosthesis interface. The full titanium prosthesis and full ceramic knee showed significantly fewer blooming artifacts compared to the standard CoCr prosthesis (mean virtual growth 0.6-2.2 mm compared to 2.9-4.6 mm, p < 0.001). Dual-energy CT protocols showed less blooming (range 3.3-3.8 mm) compared to single-energy protocols (4.6-5.5 mm). The full titanium and full ceramic prostheses showed significantly fewer streak artifacts (mean standard deviation 77-86 Hounsfield unit (HU)) compared to the standard CoCr prosthesis (277-334 HU, p < 0.001). All dual-energy CT protocols had fewer metal streak artifacts (215-296 HU compared to single-energy CT protocols (392-497 HU)). Full titanium and ceramic prostheses were ranked superior with regard to the image quality at the bone/prosthesis interface compared to a standard CoCr prosthesis, and all dual-energy CT protocols were ranked better than single-energy protocols. Dual-energy CT and ceramic or titanium prostheses reduce CT artifacts and provide superior image quality of total knee arthroplasty at the bone/prosthesis interface. These findings support the use of dual-energy CT as a solid imaging base for clinical decision-making and the use of full-titanium or ceramic prostheses to allow for better CT visualization of the bone-prosthesis interface.

Measurement of fatigue: Comparison of the reliability and validity of single-item and short measures to a comprehensive measure.

PubMed

Kim, Hee-Ju; Abraham, Ivo

2017-01-01

Evidence is needed on the clinicometric properties of single-item or short measures as alternatives to comprehensive measures. We examined whether two single-item fatigue measures (i.e., Likert scale, numeric rating scale) or a short fatigue measure were comparable to a comprehensive measure in reliability (i.e., internal consistency and test-retest reliability) and validity (i.e., convergent, concurrent, and predictive validity) in Korean young adults. For this quantitative study, we selected the Functional Assessment of Chronic Illness Therapy-Fatigue for the comprehensive measure and the Profile of Mood States-Brief, Fatigue subscale for the short measure; and constructed two single-item measures. A total of 368 students from four nursing colleges in South Korea participated. We used Cronbach's alpha and item-total correlation for internal consistency reliability and intraclass correlation coefficient for test-retest reliability. We assessed Pearson's correlation with a comprehensive measure for convergent validity, with perceived stress level and sleep quality for concurrent validity and the receiver operating characteristic curve for predictive validity. The short measure was comparable to the comprehensive measure in internal consistency reliability (Cronbach's alpha=0.81 vs. 0.88); test-retest reliability (intraclass correlation coefficient=0.66 vs. 0.61); convergent validity (r with comprehensive measure=0.79); concurrent validity (r with perceived stress=0.55, r with sleep quality=0.39) and predictive validity (area under curve=0.88). Single-item measures were not comparable to the comprehensive measure. A short fatigue measure exhibited similar levels of reliability and validity to the comprehensive measure in Korean young adults. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessing a mini-application as a performance proxy for a finite element method engineering application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Paul T.; Heroux, Michael A.; Barrett, Richard F.

The performance of a large-scale, production-quality science and engineering application (‘app’) is often dominated by a small subset of the code. Even within that subset, computational and data access patterns are often repeated, so that an even smaller portion can represent the performance-impacting features. If application developers, parallel computing experts, and computer architects can together identify this representative subset and then develop a small mini-application (‘miniapp’) that can capture these primary performance characteristics, then this miniapp can be used to both improve the performance of the app as well as provide a tool for co-design for the high-performance computing community.more » However, a critical question is whether a miniapp can effectively capture key performance behavior of an app. This study provides a comparison of an implicit finite element semiconductor device modeling app on unstructured meshes with an implicit finite element miniapp on unstructured meshes. The goal is to assess whether the miniapp is predictive of the performance of the app. Finally, single compute node performance will be compared, as well as scaling up to 16,000 cores. Results indicate that the miniapp can be reasonably predictive of the performance characteristics of the app for a single iteration of the solver on a single compute node.« less

Assessing a mini-application as a performance proxy for a finite element method engineering application

DOE PAGES

Lin, Paul T.; Heroux, Michael A.; Barrett, Richard F.; ...

2015-07-30

The performance of a large-scale, production-quality science and engineering application (‘app’) is often dominated by a small subset of the code. Even within that subset, computational and data access patterns are often repeated, so that an even smaller portion can represent the performance-impacting features. If application developers, parallel computing experts, and computer architects can together identify this representative subset and then develop a small mini-application (‘miniapp’) that can capture these primary performance characteristics, then this miniapp can be used to both improve the performance of the app as well as provide a tool for co-design for the high-performance computing community.more » However, a critical question is whether a miniapp can effectively capture key performance behavior of an app. This study provides a comparison of an implicit finite element semiconductor device modeling app on unstructured meshes with an implicit finite element miniapp on unstructured meshes. The goal is to assess whether the miniapp is predictive of the performance of the app. Finally, single compute node performance will be compared, as well as scaling up to 16,000 cores. Results indicate that the miniapp can be reasonably predictive of the performance characteristics of the app for a single iteration of the solver on a single compute node.« less

Incidence and characteristics of acute referred orofacial pain caused by a posterior single tooth pulpitis in an Iranian population.

PubMed

Hashemipour, Maryam Alsadat; Borna, Roya

2014-02-01

This study was designed to evaluate incidence and characteristics of acute referred orofacial pain caused by a posterior single tooth pulpitis in an Iranian population. In this cross-sectional study, 3,150 patients (1,400 males and 1,750 females) with pain in the orofacial region were evaluated via clinical and radiographic examination to determine their pain source. Patients completed a standardized clinical questionnaire consisting of a numerical rating scale for pain intensity and chose verbal descriptors from short form McGill questionnaire to describe the quality of their pain. Visual analog scale (VAS) was used to score pain intensity. In addition, patients indicated sites to which pain referred by drawing on an illustration of the head and neck. Data were analyzed using chi-square, fisher exact, and Mann-Whitney tests. Two thousand and hundred twenty patients (67/3%) reported pain in sites that diagnostically differed from the pain source. According to statistical analysis, sex (P = 0.02), intensity of pain (0.04), and quality (P = 0.001) of pain influenced its referral nature, while age of patients and kind of stimulus had no considerable effect on pain referral (P > 0.05). The results of the present study show the prevalence of referred pain in the head, face, and neck region is moderately high. Therefore, in patients with orofacial pain, it is essential to carefully examination before carrying out treatment that could be inappropriate. © 2013 The Authors Pain Practice © 2013 World Institute of Pain.

Single-crystal phosphors for high-brightness white LEDs/LDs

NASA Astrophysics Data System (ADS)

Víllora, Encarnación G.; Arjoca, Stelian; Inomata, Daisuke; Shimamura, Kiyoshi

2016-03-01

White light-emitting diodes (wLEDs) are the new environmental friendly sources for general lighting purposes. For applications requiring a high-brightness, current wLEDs present overheating problems, which drastically decrease their emission efficiency, color quality and lifetime. This work gives an overview of the recent investigations on single-crystal phosphors (SCPs), which are proposed as novel alternative to conventional ceramic powder phosphors (CPPs). This totally new approach takes advantage of the superior properties of single-crystals in comparison with ceramic materials. SCPs exhibit an outstanding conversion efficiency and thermal stability up to 300°C. Furthermore, compared with encapsulated CPPs, SCPs possess a superior thermal conductivity, so that generated heat can be released efficiently. The conjunction of all these characteristics results in a low temperature rise of SCPs even under high blue irradiances, where conventional CPPs are overheated or even burned. Therefore, SCPs represent the ideal, long-demanded all-inorganic phosphors for high-brightness white light sources, especially those involving the use of high-density laser-diode beams.

Linear and nonlinear dynamic analysis of redundant load path bearingless rotor systems

NASA Technical Reports Server (NTRS)

Murthy, V. R.

1985-01-01

The bearingless rotorcraft offers reduced weight, less complexity and superior flying qualities. Almost all the current industrial structural dynamic programs of conventional rotors which consist of single load path rotor blades employ the transfer matrix method to determine natural vibration characteristics because this method is ideally suited for one dimensional chain like structures. This method is extended to multiple load path rotor blades without resorting to an equivalent single load path approximation. Unlike the conventional blades, it isk necessary to introduce the axial-degree-of-freedom into the solution process to account for the differential axial displacements in the different load paths. With the present extension, the current rotor dynamic programs can be modified with relative ease to account for the multiple load paths without resorting to the equivalent single load path modeling. The results obtained by the transfer matrix method are validated by comparing with the finite element solutions. A differential stiffness matrix due to blade rotation is derived to facilitate the finite element solutions.

The effects of prospective mate quality on investments in healthy body weight among single women.

PubMed

Harris, Matthew C; Cronin, Christopher J

2017-02-01

This paper examines how a single female's investment in healthy body weight is affected by the quality of single males in her marriage market. A principle concern in estimation is the presence of market-level unobserved heterogeneity that may be correlated with changes in single male quality, measured as earning potential. To address this concern, we employ a differencing strategy that normalizes the exercise behaviors of single women to those of their married counterparts. Our main results suggest that when potential mate quality in a marriage market decreases, single black women invest less in healthy body weight. For example, we find that a 10 percentage point increase in the proportion of low quality single black males leads to a 5-10% decrease in vigorous exercise taken by single black females. Results for single white women are qualitatively similar, but not consistent across specifications. These results highlight the relationship between male and female human capital acquisition that is driven by participation in the marriage market. Our results suggest that programs designed to improve the economic prospects of single males may yield positive externalities in the form of improved health behaviors, such as more exercise, particularly for single black females. Copyright © 2016 Elsevier B.V. All rights reserved.

Critical appraisal of clinical trials in multiple system atrophy: Toward better quality.

PubMed

Castro Caldas, Ana; Levin, Johannes; Djaldetti, Ruth; Rascol, Olivier; Wenning, Gregor; Ferreira, Joaquim J

2017-10-01

Multiple system atrophy (MSA) is a rare neurodegenerative disease of undetermined cause. Although many clinical trials have been conducted, there is still no treatment that cures the disease or slows its progression. We sought to assess the clinical trials, methodology, and quality of reporting of clinical trails conducted in MSA patients. We conducted a systematic review of all trials with at least 1 MSA patient subject to any pharmacological/nonpharmacological interventions. Two independent reviewers evaluated the methodological characteristics and quality of reporting of trials. A total of 60 clinical trials were identified, including 1375 MSA patients. Of the trials, 51% (n = 31) were single-arm studies. A total of 28% (n = 17) had a parallel design, half of which (n = 13) were placebo controlled. Of the studies, 8 (13.3%) were conducted in a multicenter setting, 3 of which were responsible for 49.3% (n = 678) of the total included MSA patients. The description of primary outcomes was unclear in 60% (n = 40) of trials. Only 10 (16.7%) clinical trials clearly described the randomization process. Blinding of the participants, personnel, and outcome assessments were at high risk of bias in the majority of studies. The number of dropouts/withdrawals was high (n = 326, 23.4% among the included patients). Overall, the design and quality of reporting of the reviewed studies is unsatisfactory. The most frequent clinical trials were small and single centered. Inadequate reporting was related to the information on the randomization process, sequence generation, allocation concealment, blinding of participants, and sample size calculations. Although improved during the recent years, methodological quality and trial design need to be optimized to generate more informative results. © 2017 International Parkinson and Movement Disorder Society. © 2017 International Parkinson and Movement Disorder Society.

Effects of different extenders on DNA integrity of boar spermatozoa following freezing-thawing.

PubMed

Hu, Jian-hong; Li, Qing-wang; Jiang, Zhong-liang; Li, Wen-ye

2008-12-01

The sperm-rich fraction, collected from eight mature Yorkshire boars, was frozen in an extender containing 9% LDL (w/v), 100mM trehalose, or 20% yolk (v/v), respectively. Sperm DNA integrity was assessed using the single-cell gel electrophoresis (SCGE). Other sperm quality characteristics such as motility, acrosome and membrane integrity were also monitored. The results showed that freezing-thawing caused an increase in sperm DNA fragmentation, and extender containing 9% LDL could significantly protect sperm DNA integrity (P<0.05) from the damage caused by cryopreservation and decrease DNA damages compared with extender containing 100mM trehalose and 20% yolk (v/v). No significant difference in damaged DNA was detected between frozen and unfrozen semen samples for extender of 9% LDL and 100mM trehalose, but cryopreservation could increase the degree of DNA damage (P<0.05), the percentage of damaged DNA degree of grade 2 and 3 was significantly increased. The deterioration in post-thaw sperm DNA integrity was concurrent with reduced sperm characteristics. The data here demonstrated that the cryoprotectant played a fundamental role in reducing boar sperm DNA damage and protecting DNA integrity. It can be suggested that evaluation of sperm DNA integrity, coupled with correlative and basic characteristics such as motility, acrosome integrity and membrane integrity, may aid in determining the quality of frozen boar semen.

Micalastic high-voltage insulation: Design features and experience

NASA Astrophysics Data System (ADS)

Wichmann, A.

1981-12-01

High-quality mica, carefully selected epoxy resins and a well-matched vacuum/pressure impregnation process determine the characteristics of the MICALASTIC insulation for large turbine-generators. Logical development and process manufacturing quality control have led to an insulation system of high quality and operating reliability. The first winding of a turbine-generator being impregnated and cured under vacuum with solvent-free synthetic resin in 1958 was designed for 10.5 kV rated voltage. Ever since, Siemens AG and Kraftwerk Union AG have used this type of insulation for all direct-cooled windings and also for an increasing number of indirect-cooled windings. At present, 240 turbine-generators with a total of more than 115,000 MVA output have been built. Since 1960, this insulation system has been registered for Siemens AG under the trade name MICALASTIC. The stator windings of the largest, single-shaft generators to date, rated 1560 MVA, 27 kV, has been built with MICALASTIC insulation.

Characteristic Chromatogram: A Method of Discriminate and Quantitative Analysis for Quality Evaluation of Uncaria Stem with Hooks.

PubMed

Hou, Jinjun; Feng, Ruihong; Zhang, Yibei; Pan, Huiqin; Yao, Shuai; Han, Sumei; Feng, Zijin; Cai, Luying; Wu, Wanying; Guo, De-An

2018-04-01

It remains a challenge to establish new monographs for herbal drugs derived from multiple botanical sources. Specifically, the difficulty involves discriminating and quantifying these herbs with components whose levels vary markedly among different samples. Using Uncaria stem with hooks as an example, a characteristic chromatogram was proposed to discriminate its five botanical origins and to quantify its characteristic components in the chromatogram. The characteristic chromatogram with respect to the components of Uncaria stem with hooks with the five botanical origins was established using 0.02% diethylamine and acetonitrile as the mobile phase. The total analysis time was 50 min and the detection wavelength was 245 nm. Using the same chromatogram parameters, the single standard to determine multicomponents method was validated to simultaneously quantify nine indole alkaloids, including vincosamide, 3 α -dihydrocadambine, isocorynoxeine, corynoxeine, isorhynchophylline, rhynchophylline, hirsuteine, hirsutine, and geissoschizine methyl ether. The results showed that only the Uncaria stem with hooks from Uncaria rhynchophylla , the most widely used in the herbal market, showed the presence of these nine alkaloids. The conversion factors were 1.27, 2.32, 0.98, 1.04, 1.00, 1.02, 1.26, 1.33, and 1.25, respectively. The limits of quantitation were lower than 700 ng/mL. The total contents of 31 batches of Uncaria stem with hooks were in the range of 0.1 - 0.6%, except for Uncaria hirsuta Havil and Uncaria sinensis (Oliv.) Havil. The results also showed that the total content of indole alkaloids tended to decrease with an increase in the hook diameter. This showed that the characteristic chromatogram is practical for controlling the quality of traditional Chinese medicines with multiple botanical origins. Georg Thieme Verlag KG Stuttgart · New York.

Behavioral Contexts, Food-Choice Coping Strategies, and Dietary Quality of a Multiethnic Sample of Employed Parents

PubMed Central

Blake, Christine E.; Wethington, Elaine; Farrell, Tracy J.; Bisogni, Carole A.; Devine, Carol M.

2012-01-01

Employed parents’ work and family conditions provide behavioral contexts for their food choices. Relationships between employed parents’ food-choice coping strategies, behavioral contexts, and dietary quality were evaluated. Data on work and family conditions, sociodemographic characteristics, eating behavior, and dietary intake from two 24-hour dietary recalls were collected in a random sample cross-sectional pilot telephone survey in the fall of 2006. Black, white, and Latino employed mothers (n=25) and fathers (n=25) were recruited from a low/moderate income urban area in upstate New York. Hierarchical cluster analysis (Ward’s method) identified three clusters of parents differing in use of food-choice coping strategies (ie, Individualized Eating, Missing Meals, and Home Cooking). Cluster sociodemographic, work, and family characteristics were compared using χ2 and Fisher’s exact tests. Cluster differences in dietary quality (Healthy Eating Index 2005) were analyzed using analysis of variance. Clusters differed significantly (P≤0.05) on food-choice coping strategies, dietary quality, and behavioral contexts (ie, work schedule, marital status, partner’s employment, and number of children). Individualized Eating and Missing Meals clusters were characterized by nonstandard work hours, having a working partner, single parenthood and with family meals away from home, grabbing quick food instead of a meal, using convenience entrées at home, and missing meals or individualized eating. The Home Cooking cluster included considerably more married fathers with nonemployed spouses and more home-cooked family meals. Food-choice coping strategies affecting dietary quality reflect parents’ work and family conditions. Nutritional guidance and family policy needs to consider these important behavioral contexts for family nutrition and health. PMID:21338739

Behavioral contexts, food-choice coping strategies, and dietary quality of a multiethnic sample of employed parents.

PubMed

Blake, Christine E; Wethington, Elaine; Farrell, Tracy J; Bisogni, Carole A; Devine, Carol M

2011-03-01

Employed parents' work and family conditions provide behavioral contexts for their food choices. Relationships between employed parents' food-choice coping strategies, behavioral contexts, and dietary quality were evaluated. Data on work and family conditions, sociodemographic characteristics, eating behavior, and dietary intake from two 24-hour dietary recalls were collected in a random sample cross-sectional pilot telephone survey in the fall of 2006. Black, white, and Latino employed mothers (n=25) and fathers (n=25) were recruited from a low/moderate income urban area in upstate New York. Hierarchical cluster analysis (Ward's method) identified three clusters of parents differing in use of food-choice coping strategies (ie, Individualized Eating, Missing Meals, and Home Cooking). Cluster sociodemographic, work, and family characteristics were compared using χ(2) and Fisher's exact tests. Cluster differences in dietary quality (Healthy Eating Index 2005) were analyzed using analysis of variance. Clusters differed significantly (P≤0.05) on food-choice coping strategies, dietary quality, and behavioral contexts (ie, work schedule, marital status, partner's employment, and number of children). Individualized Eating and Missing Meals clusters were characterized by nonstandard work hours, having a working partner, single parenthood and with family meals away from home, grabbing quick food instead of a meal, using convenience entrées at home, and missing meals or individualized eating. The Home Cooking cluster included considerably more married fathers with nonemployed spouses and more home-cooked family meals. Food-choice coping strategies affecting dietary quality reflect parents' work and family conditions. Nutritional guidance and family policy needs to consider these important behavioral contexts for family nutrition and health. Copyright © 2011 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

High-power, single-frequency, continuous-wave second-harmonic-generation of ytterbium fiber laser in PPKTP and MgO:sPPLT.

PubMed

Kumar, S Chaitanya; Samanta, G K; Ebrahim-Zadeh, M

2009-08-03

Characteristics of high-power, narrow-linewidth, continuous-wave (cw) green radiation obtained by simple single-pass second-harmonic-generation (SHG) of a cw ytterbium fiber laser at 1064 nm in the nonlinear crystals of PPKTP and MgO:sPPLT are studied and compared. Temperature tuning and SHG power scaling up to nearly 10 W for input fundamental power levels up to 30 W are performed. Various contributions to thermal effects in both crystals, limiting the SHG conversion efficiency, are studied. Optimal focusing conditions and thermal management schemes are investigated to maximize SHG performance in MgO:sPPLT. Stable green output power and high spatial beam quality with M(2)<1.33 and M(2)<1.34 is achieved in MgO:sPPLT and PPKTP, respectively.

Coupling of small, low-loss hexapole mode with photonic crystal slab waveguide mode.

PubMed

Kim, Guk-Hyun; Lee, Yong-Hee; Shinya, Akihiko; Notomi, Masaya

2004-12-27

Coupling characteristics between the single-cell hexapole mode and the triangular-lattice photonic crystal slab waveguide mode is studied by the finite-difference time-domain method. The single-cell hexapole mode has a high quality factor (Q) of 3.3Chi106 and a small modal volume of 1.18(lambda/n)3. Based on the symmetry, three representative types of coupling geometries (shoulder-couple, butt-couple and side-couple structures) are selected and tested. The coupling efficiency shows strong dependence on the transverse overlap of the cavity mode and the waveguide mode over the region of the waveguide. The shoulder-couple structure shows best coupling characteristics among three tested structures. For example, two shouldercouple waveguides and a hexapole cavity result in a high performance resonant-tunneling-filter with Q of 9.7Chi105 and transmittance of 0.48. In the side-couple structure, the coupling strength is much weaker than that of the shoulder-couple structure because of the poor spatial overlap between the mode profiles. In the direct-couple structure, the energy transfer from the cavity to the waveguide is prohibited because of the symmetry mismatch and no coupling is observed.

Genetic Improvement of Switchgrass and Other Herbaceous Plants for Use as Biomass Fuel Feedstock

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vogel, K.P.

2001-01-11

It should be highly feasible to genetically modify the feedstock quality of switchgrass and other herbaceous plants using both conventional and molecular breeding techniques. Effectiveness of breeding to modify herbages of switchgrass and other perennial and annual herbaceous species has already been demonstrated. The use of molecular markers and transformation technology will greatly enhance the capability of breeders to modify the plant structure and cell walls of herbaceous plants. It will be necessary to monitor gene flow to remnant wild populations of plants and have strategies available to curtail gene flow if it becomes a potential problem. It also willmore » be necessary to monitor plant survival and long-term productivity as affected by genetic changes that improve forage quality. Information on the conversion processes that will be used and the biomass characteristics that affect conversion efficiency and rate is absolutely essential as well as information on the relative economic value of specific traits. Because most forage or biomass quality characteristics are highly affected by plant maturity, it is suggested that plant material of specific maturity stages be used in research to determining desirable feedstock quality characteristics. Plant material could be collected at various stages of development from an array of environments and storage conditions that could be used in conversion research. The same plant material could be used to develop NIRS calibrations that could be used by breeders in their selection programs and also to develop criteria for a feedstock quality assessment program. Breeding for improved feedstock quality will likely affect the rate of improvement of biomass production per acre. If the same level of resources are used, multi-trait breeding simply reduces the selection pressure and hence the breeding progress that can be made for a single trait unless all the traits are highly correlated. Since desirable feedstock traits are likely to be similar to IVDMD, it is likely that they will not be highly positively correlated with yield. Hence to achieve target yields and improve specific quality traits, it will likely be necessary to increase the resources available to plant breeders. Marker assisted selection will be extremely useful in breeding for quality traits, particularly for traits that can be affected by modifying a few genes. Genetic markers are going to be needed for monitoring gene flow to wild populations. Transformation will be a very useful tool for determining the affects of specific genes on biomass feedstock quality.« less

High dynamic range subjective testing

NASA Astrophysics Data System (ADS)

Allan, Brahim; Nilsson, Mike

2016-09-01

This paper describes of a set of subjective tests that the authors have carried out to assess the end user perception of video encoded with High Dynamic Range technology when viewed in a typical home environment. Viewers scored individual single clips of content, presented in High Definition (HD) and Ultra High Definition (UHD), in Standard Dynamic Range (SDR), and in High Dynamic Range (HDR) using both the Perceptual Quantizer (PQ) and Hybrid Log Gamma (HLG) transfer characteristics, and presented in SDR as the backwards compatible rendering of the HLG representation. The quality of SDR HD was improved by approximately equal amounts by either increasing the dynamic range or increasing the resolution to UHD. A further smaller increase in quality was observed in the Mean Opinion Scores of the viewers by increasing both the dynamic range and the resolution, but this was not quite statistically significant.

Utilization of ERTS-1 for appraising changes in continental migratory bird habitat

NASA Technical Reports Server (NTRS)

Gilmer, D. S. (Principal Investigator); Work, E. A., Jr.; Klett, A. T.

1974-01-01

The author has identified the following significant results. Information on numbers, distribution, and quality of wetlands in the breeding range of migratory waterfowl is important for the management of this wildlife resource. Using computer processing of data gathered by the ERTS-1 multispectral scanner, techniques for obtaining indices of annual waterfowl recruitment, and habitat quality are examined. As a primary task, thematic maps and statistics relating to open surface water were produced. Discrimination of water was based upon water's low apparent radiance in a single, near-infrared waveband. An advanced technique using multispectral information for discerning open water at a level of detail finer than the virtual resolution of the data was also successfully tested. In another related task, vegetation indicators were used for detecting conditions of latent or occluded water and upland habitat characteristics.

Sleep in lonely heroin-dependent patients receiving methadone maintenance treatment: longer sleep latency, shorter sleep duration, lower sleep efficiency, and poorer sleep quality.

PubMed

Li, Hong-Jie; Zhong, Bao-Liang; Xu, Yan-Min; Zhu, Jun-Hong; Lu, Jin

2017-10-24

Given the socially isolated status of Chinese heroin-dependent patients (HDPs) and the significant association between loneliness and sleep problem in the general population, the impact of loneliness on sleep of HDPs is potentially substantial. The study aimed to test whether loneliness is associated with poor sleep in terms of quantity and quality in a consecutive sample of Chinese HDPs receiving methadone maintenance treatment (MMT). The study participants were 603 HDPs of three MMT clinics in Wuhan, China. Data on socio-demographic and clinical characteristics were collected by a standardized self-administered questionnaire. Sleep outcomes included sleep latency, sleep duration, sleep efficiency, and sleep quality. We measured depressive symptoms, loneliness, and sleep quality by using Zung's Self-rating Depression Scale, the single-item self-report of loneliness, and the Pittsburgh Sleep Quality Index, respectively. Multiple linear regression was used to examine whether loneliness is independently associated with sleep measures. After controlling for the confounding effects of potential socio-demographic and clinical variables, loneliness was significantly associated with longer sleep latency, shorter sleep duration, lower sleep efficiency, and poorer sleep quality. Loneliness may exacerbate sleep disturbance in Chinese HDPs of MMT clinics. Psychosocial interventions aimed at reducing loneliness in MMT clinics would improve the sleep of HDPs.

Identification of quantitative trait loci for grain quality in an advanced backcross population derived from the Oryza sativa variety IR64 and the wild relative O. rufipogon.

PubMed

Septiningsih, E M; Trijatmiko, K R; Moeljopawiro, S; McCouch, S R

2003-11-01

The objective of this study was to identify quantitative trait loci (QTLs) associated with grain quality in rice. Two hundred eighty-five BC(2)F(2 )families developed from an interspecific cross between cv IR64 and Oryza rufipogon (IRGC 105491) were evaluated for 14 seed quality traits. A total of 165 markers consisting of 131 single sequence repeats and 34 restriction fragment length polymorphism markers were used to create a genetic linkage map spanning the 12 rice chromosomes. Twenty-three independent QTLs were identified using single point analysis, interval mapping, and composite interval mapping. These loci consisted of one QTL for filled rough/total rough rice ratio, two for grain density, one for percentage of de-husked rice grains, two for percentage of green rice grains, three for percentage of damaged-yellow rice grains, two for percentage of red rice grains, one for milled rice recovery, three for head rice recovery, four for broken rice grains, two for crushed rice grains, one for amylose content, and one for gel consistency. For most of the QTLs identified in this study, the O. rufipogon-derived allele contributed an undesirable effect. For amylose content and gel consistency, the O. rufipogon allele may be useful in an IR64 background, depending on the cultural preferences of the consumer. Careful selection against the regions associated with negative effects will be required to avoid unwanted grain quality characteristics during the development of improved varieties for yield and yield components using introgressions from O. rufipogon.

Characteristics of knowledge content in a curated online evidence library.

PubMed

Varada, Sowmya; Lacson, Ronilda; Raja, Ali S; Ip, Ivan K; Schneider, Louise; Osterbur, David; Bain, Paul; Vetrano, Nicole; Cellini, Jacqueline; Mita, Carol; Coletti, Margaret; Whelan, Julia; Khorasani, Ramin

2018-05-01

To describe types of recommendations represented in a curated online evidence library, report on the quality of evidence-based recommendations pertaining to diagnostic imaging exams, and assess underlying knowledge representation. The evidence library is populated with clinical decision rules, professional society guidelines, and locally developed best practice guidelines. Individual recommendations were graded based on a standard methodology and compared using chi-square test. Strength of evidence ranged from grade 1 (systematic review) through grade 5 (recommendations based on expert opinion). Finally, variations in the underlying representation of these recommendations were identified. The library contains 546 individual imaging-related recommendations. Only 15% (16/106) of recommendations from clinical decision rules were grade 5 vs 83% (526/636) from professional society practice guidelines and local best practice guidelines that cited grade 5 studies (P < .0001). Minor head trauma, pulmonary embolism, and appendicitis were topic areas supported by the highest quality of evidence. Three main variations in underlying representations of recommendations were "single-decision," "branching," and "score-based." Most recommendations were grade 5, largely because studies to test and validate many recommendations were absent. Recommendation types vary in amount and complexity and, accordingly, the structure and syntax of statements they generate. However, they can be represented in single-decision, branching, and score-based representations. In a curated evidence library with graded imaging-based recommendations, evidence quality varied widely, with decision rules providing the highest-quality recommendations. The library may be helpful in highlighting evidence gaps, comparing recommendations from varied sources on similar clinical topics, and prioritizing imaging recommendations to inform clinical decision support implementation.

Is high–dose rate RapidArc-based radiosurgery dosimetrically advantageous for the treatment of intracranial tumors?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhao, Bo; Yang, Yong, E-mail: yangy2@upmc.edu; Li, Xiang

In linac-based stereotactic radiosurgery (SRS) and radiotherapy (SRT), circular cone(s) or conformal arc(s) are conventionally used to treat intracranial lesions. However, when the target is in close proximity to critical structures, it is frequently quite challenging to generate a quality plan using these techniques. In this study, we investigated the dosimetric characteristics of using high–dose rate RapidArc (RA) technique for radiosurgical treatment of intracranial lesions. A total of 10 intracranial SRS/SRT cases previously planned using dynamic conformal arc (DCA) or cone-based techniques have been included in this study. For each case, 3 treatment plans were generated: (1) a DCA planmore » with multiple noncoplanar arcs, (2) a high–dose rate RA plan with arcs oriented the same as DCA (multiple-arc RA), and 3) a high–dose rate RA plan with a single coplanar arc (single-arc RA). All treatment plans were generated under the same prescription and similar critical structure dose limits. Plan quality for different plans was evaluated by comparing various dosimetric parameters such as target coverage, conformity index (CI), homogeneity index (HI), critical structures, and normal brain tissue doses as well as beam delivery time. With similar critical structure sparing, high–dose rate RA plans can achieve much better target coverage, dose conformity, and dose homogeneity than the DCA plans can. Plan quality indices CI and HI, for the DCA, multiple-arc RA, and single-arc RA techniques, were measured as 1.67 ± 0.39, 1.32 ± 0.28, and 1.38 ± 0.30 and 1.24 ± 0.11, 1.10 ± 0.04, and 1.12 ± 0.07, respectively. Normal brain tissue dose (V{sub 12} {sub Gy}) was found to be similar for DCA and multiple-arc RA plans but much larger for the single-arc RA plans. Beam delivery was similar for DCA and multiple-arc RA plans but shorter with single-arc RA plans. Multiple-arc RA SRS/SRT can provide better treatment plans than conventional DCA plans, especially for complex cases.« less

Characterizing Dysphagia and Swallowing Intervention in the Traumatic Spinal Injury Population

PubMed Central

Valenzano, Teresa J.; Waito, Ashley A.; Steele, Catriona M.

2016-01-01

Dysphagia is reported to be a common secondary complication for individuals with traumatic spinal injuries. Different etiologies of traumatic spinal injuries may lead to different profiles of swallowing impairment. We conducted a systematic review to determine the characteristics of dysphagia after traumatic spinal injury and to describe interventions currently used to improve swallowing function in this population. A comprehensive multi-engine literature search identified 137 articles of which 5 were judged to be relevant. These underwent review for study quality, rating for level of evidence, and data extraction. The literature describing dysphagia after traumatic spinal injury was comprised predominantly of low level evidence and single case reports. Aspiration, pharyngeal residue, and decreased/absent hyolaryngeal elevation were found to be common characteristics of dysphagia in this population. The most commonly used swallowing interventions included tube feeding, compensatory swallowing strategies, and steroids/antibiotics. Improvement in swallowing function following swallowing intervention was reported in all studies, however there was no control for spontaneous recovery. The results demonstrate a need for high-quality research to profile the pathophysiology of dysphagia after traumatic spinal injury and controlled studies to demonstrate the efficacy of swallowing interventions in this population. PMID:27412004

A Review of Dysphagia Presentation and Intervention Following Traumatic Spinal Injury: An Understudied Population.

PubMed

Valenzano, Teresa J; Waito, Ashley A; Steele, Catriona M

2016-10-01

Dysphagia is reported to be a common secondary complication for individuals with traumatic spinal injuries. Different etiologies of traumatic spinal injuries may lead to different profiles of swallowing impairment. We conducted a systematic review to determine the characteristics of dysphagia after traumatic spinal injury and to describe interventions currently used to improve swallowing function in this population. A comprehensive multiengine literature search identified 137 articles of which five were judged to be relevant. These underwent review for study quality, rating for level of evidence, and data extraction. The literature describing dysphagia after traumatic spinal injury was comprised predominantly of low-level evidence and single case reports. Aspiration, pharyngeal residue, and decreased/absent hyolaryngeal elevation were found to be common characteristics of dysphagia in this population. The most commonly used swallowing interventions included tube feeding, compensatory swallowing strategies, and steroids/antibiotics. Improvement in swallowing function following swallowing intervention was reported in all studies; however, there was no control for spontaneous recovery. The results demonstrate a need for high-quality research to profile the pathophysiology of dysphagia after traumatic spinal injury and controlled studies to demonstrate the efficacy of swallowing interventions in this population.

A hospital-specific template for benchmarking its cost and quality.

PubMed

Silber, Jeffrey H; Rosenbaum, Paul R; Ross, Richard N; Ludwig, Justin M; Wang, Wei; Niknam, Bijan A; Saynisch, Philip A; Even-Shoshan, Orit; Kelz, Rachel R; Fleisher, Lee A

2014-10-01

Develop an improved method for auditing hospital cost and quality tailored to a specific hospital's patient population. Medicare claims in general, gynecologic and urologic surgery, and orthopedics from Illinois, New York, and Texas between 2004 and 2006. A template of 300 representative patients from a single index hospital was constructed and used to match 300 patients at 43 hospitals that had a minimum of 500 patients over a 3-year study period. From each of 43 hospitals we chose 300 patients most resembling the template using multivariate matching. We found close matches on procedures and patient characteristics, far more balanced than would be expected in a randomized trial. There were little to no differences between the index hospital's template and the 43 hospitals on most patient characteristics yet large and significant differences in mortality, failure-to-rescue, and cost. Matching can produce fair, directly standardized audits. From the perspective of the index hospital, "hospital-specific" template matching provides the fairness of direct standardization with the specific institutional relevance of indirect standardization. Using this approach, hospitals will be better able to examine their performance, and better determine why they are achieving the results they observe. © Health Research and Educational Trust.

48 CFR 246.408 - Single-agency assignments of Government contract quality assurance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of Government contract quality assurance. 246.408 Section 246.408 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACT MANAGEMENT QUALITY ASSURANCE Government Contract Quality Assurance 246.408 Single-agency assignments of Government contract...

Optimization of multiple quality characteristics in bone drilling using grey relational analysis

PubMed Central

Pandey, Rupesh Kumar; Panda, Sudhansu Sekhar

2014-01-01

Purpose Drilling of bone is common during bone fracture treatment to fix the fractured parts with screws wires or plates. Minimally invasive drilling of the bone has a great demand as it helps in better fixation and quick healing of the broken bones. The purpose of the present investigation is to determine the optimum cutting condition for the minimization of the temperature, force and surface roughness simultaneously during bone drilling. Method In this study, drilling experiments have been performed on bovine bone with different conditions of feed rate and drill rotational speed using full factorial design. Optimal level of the drilling parameters is determined by the grey relational grade (GRG) obtained from the GRA as the performance index of multiple quality characteristics. The effect of each drilling parameter on GRG is determined using analysis of variance (ANOVA) and the results obtained are validated by confirmation experiment. Results Grey relational analysis showed that the investigation with feed rate of 40 mm/min and spindle speed of 500 rpm has the highest grey relational grade and is recommended setting for minimum temperature, force and surface roughness simultaneously during bone drilling. Feed rate has the highest contribution (59.49%) on the multiple performance characteristics followed by the spindle speed (37.69%) as obtained from ANOVA analysis. Conclusions The use of grey relational analysis will simplify the complex process of optimization of the multi response characteristics in bone drilling by converting them into a single grey relational grade. The use of the above suggested methodology can greatly minimize the bone tissue injury during drilling. PMID:25829751

Optimization of multiple quality characteristics in bone drilling using grey relational analysis.

PubMed

Pandey, Rupesh Kumar; Panda, Sudhansu Sekhar

2015-03-01

Drilling of bone is common during bone fracture treatment to fix the fractured parts with screws wires or plates. Minimally invasive drilling of the bone has a great demand as it helps in better fixation and quick healing of the broken bones. The purpose of the present investigation is to determine the optimum cutting condition for the minimization of the temperature, force and surface roughness simultaneously during bone drilling. In this study, drilling experiments have been performed on bovine bone with different conditions of feed rate and drill rotational speed using full factorial design. Optimal level of the drilling parameters is determined by the grey relational grade (GRG) obtained from the GRA as the performance index of multiple quality characteristics. The effect of each drilling parameter on GRG is determined using analysis of variance (ANOVA) and the results obtained are validated by confirmation experiment. Grey relational analysis showed that the investigation with feed rate of 40 mm/min and spindle speed of 500 rpm has the highest grey relational grade and is recommended setting for minimum temperature, force and surface roughness simultaneously during bone drilling. Feed rate has the highest contribution (59.49%) on the multiple performance characteristics followed by the spindle speed (37.69%) as obtained from ANOVA analysis. The use of grey relational analysis will simplify the complex process of optimization of the multi response characteristics in bone drilling by converting them into a single grey relational grade. The use of the above suggested methodology can greatly minimize the bone tissue injury during drilling.

SmallSat Precision Navigation with Low-Cost MEMS IMU Swarms

NASA Technical Reports Server (NTRS)

Christian, John; Bishop, Robert; Martinez, Andres; Petro, Andrew

2015-01-01

The continued advancement of small satellite-based science missions requires the solution to a number of important technical challenges. Of particular note is that small satellite missions are characterized by tight constraints on cost, mass, power, and volume that make them unable to fly the high-quality Inertial Measurement Units (IMUs) required for orbital missions demanding precise orientation and positioning. Instead, small satellite missions typically fly low-cost Micro-Electro-Mechanical System (MEMS) IMUs. Unfortunately, the performance characteristics of these MEMS IMUs make them ineffectual in many spaceflight applications when employed in a single IMU system configuration.

Designing a multiple dependent state sampling plan based on the coefficient of variation.

PubMed

Yan, Aijun; Liu, Sanyang; Dong, Xiaojuan

2016-01-01

A multiple dependent state (MDS) sampling plan is developed based on the coefficient of variation of the quality characteristic which follows a normal distribution with unknown mean and variance. The optimal plan parameters of the proposed plan are solved by a nonlinear optimization model, which satisfies the given producer's risk and consumer's risk at the same time and minimizes the sample size required for inspection. The advantages of the proposed MDS sampling plan over the existing single sampling plan are discussed. Finally an example is given to illustrate the proposed plan.

Psychosocial work characteristics and sleep quality: a systematic review of longitudinal and intervention research.

PubMed

Van Laethem, Michelle; Beckers, Debby G J; Kompier, Michiel A J; Dijksterhuis, Ap; Geurts, Sabine A E

2013-11-01

The objective of this study was to review longitudinal and intervention studies examining the association between psychosocial work characteristics (eg, job demands, job control, and social support) and sleep quality. Our main research aims were to examine whether (i) psychosocial work characteristics are a predictor of sleep quality, and (ii) sleep quality, in turn, is a predictor of psychosocial work characteristics. A systematic literature search resulted in 20 relevant papers, of which 16 were longitudinal studies and 3 were intervention studies (1 study was discussed in separate papers). To quantify results, we assessed the strength of evidence of all examined associations and subsequently evaluated the studies' research quality based on predefined quality criteria. One intervention and three longitudinal studies studies were categorized as being of high-quality. In longitudinal studies, we found consistent and strong evidence for a negative relation between job demands and sleep quality as well as evidence for a positive relation between job control and sleep quality. Other psychosocial work characteristics were examined in an insufficient number of (high-quality) studies. Moreover, both intervention studies as well as studies investigating reversed and reciprocal relations are rare, which further limits the possibility of drawing conclusions on causality. Based on the current literature, it can be concluded that high job demands and low job control are predictors of poor sleep quality. More high-quality research is needed to examine the possible causal relationship between these and other psychosocial work characteristics with sleep quality, in addition to research focusing on reversed and reciprocal relations.

SU-E-T-617: Plan Quality Estimation of Intensity-Modulated Radiotherapy Cases for Lung Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koo, J; Yoon, M; Chung, W

Purpose: To estimate the planning quality of intensity-modulated radiotherapy in lung cancer cases and to provide preliminary data for the development of a planning quality assurance algorithm. Methods: 42 IMRT plans previously used in cases of solitary lung cancers were collected. Organs in or near the thoracic cavity, such as lung (ipsilateral, contralateral), heart, liver, esophagus, cord and bronchus were considered as organs at risk (OARs) in this study. The coverage index (CVI), conformity index (CI), homogeneity index (HI), volume, irregularity (standard deviation of center-surface distance) were used to compare PTV dose characteristics. The effective uniform dose (EUD), V10Gy, andmore » V20Gy of the OARs were used to compare OAR dose characteristics. Results: Average CVI, CI, HI values were 0.9, 0.8, 0.1, respectively. CVI and CI had narrow Gaussian distribution curves without a singular value, but one case had a relatively high (0.25) HI because of location and irregular shape (Irregularity of 18.5 when average was 12.5) of PTV. EUDs tended to decrease as OAR-PTV distance increased and OAR-PTV overlap volume decreased. Conclusion: This work indicates the potential for significant plan quality deviation of similar lung cancer cases. Considering that this study were from a single department, differences in the treatment results for a given patient would be much more pronounced if multiple departments (and therefore more planners) were involved. Therefore, further examination of QA protocols is needed to reduce deviations in radiation treatment planning.« less

The impact of xerostomia on oral-health-related quality of life among younger adults

PubMed Central

Thomson, W Murray; Lawrence, Herenia P; Broadbent, Jonathan M; Poulton, Richie

2006-01-01

Background Recent research has suggested that chronic dry mouth affects the day-to-day lives of older people living in institutions. The condition has usually been considered to be a feature of old age, but recent work by our team produced the somewhat surprising finding that 10% of people in their early thirties are affected. This raises the issue of whether dry mouth is a trivial condition or a more substantial threat to quality of life among younger people. The objective of this study was to examine the association between xerostomia and oral-health-related quality of life among young adults while controlling for clinical oral health status and other potential confounding factors. Methods Cross-sectional analysis of data from a longstanding prospective observational study of a Dunedin (New Zealand) birth cohort: clinical dental examinations and questionnaires were used at age 32. The main measures were xerostomia (the subjective feeling of dry mouth, measured with a single question) and oral-health-related quality of life (OHRQoL) measured using the short-form Oral Health Impact Profile (OHIP-14). Results Of the 923 participants (48.9% female), one in ten were categorised as 'xerostomic', with no apparent gender difference. There was a strong association between xerostomia and OHRQoL (across all OHIP-14 domains) which persisted after multivariate analysis to control for clinical characteristics, gender, smoking status and personality characteristics (negative emotionality and positive emotionality). Conclusion Xerostomia is not a trivial condition; it appears to have marked and consistent effects on sufferers' day-to-day lives. PMID:17090332

Single Subject Research: Applications to Special Education

ERIC Educational Resources Information Center

Cakiroglu, Orhan

2012-01-01

Single subject research is a scientific research methodology that is increasingly used in the field of special education. Therefore, understanding the unique characteristics of single subject research methodology is critical both for educators and practitioners. Certain characteristics make single subject research one of the most preferred…

Poultry Meat Quality in Relation to Muscle Growth and Muscle Fiber Characteristics

PubMed Central

Ismail, Ishamri; Joo, Seon-Tea

2017-01-01

Variations in the definition of poultry meat quality exist because the quality traits are not solely based on intrinsic and extrinsic factors but also consumers’ preference. Appearance quality traits (AQT), eating quality traits (EQT), and reliance quality traits (RQT) are the major factors focused by the consumer before buying good quality of poultry meat. AQT and EQT of poultry meat are controlled by physical and biochemical characteristics of muscle fibers which can be categorized into a total number of fibers (TNF), cross-sectional area of fibers (CSAF), and fiber type composition (FTC). In poultry meat, it has been shown that muscle fiber properties play a key role in meat quality because numerous studies have reported the relationships between quality traits and fiber characteristics. Despite intensive research has been carried out to manipulate the muscle fiber to improve poultry meat quality, demand in a rapid growth of poultry muscle has correlated to the deterioration in the meat quality. The present paper reviews the definition of poultry meat quality, meat quality traits, and variations of meat quality. Also, this review presents recent knowledge underlying the relationship between poultry meat quality traits and muscle fiber characteristics. PMID:29725209

The impact of software quality characteristics on healthcare outcome: a literature review.

PubMed

Aghazadeh, Sakineh; Pirnejad, Habibollah; Moradkhani, Alireza; Aliev, Alvosat

2014-01-01

The aim of this study was to discover the effect of software quality characteristics on healthcare quality and efficiency indicators. Through a systematic literature review, we selected and analyzed 37 original research papers to investigate the impact of the software indicators (coming from the standard ISO 9126 quality characteristics and sub-characteristics) on some of healthcare important outcome indicators and finally ranked these software indicators. The results showed that the software characteristics usability, reliability and efficiency were mostly favored in the studies, indicating their importance. On the other hand, user satisfaction, quality of patient care, clinical workflow efficiency, providers' communication and information exchange, patient satisfaction and care costs were among the healthcare outcome indicators frequently evaluated in relation to the mentioned software characteristics. Regression Logistic Method was the most common assessment methodology, and Confirmatory Factor Analysis and Structural Equation Modeling were performed to test the structural model's fit. The software characteristics were considered to impact the healthcare outcome indicators through other intermediate factors (variables).

Approaches to Quality Risk Management When Using Single-Use Systems in the Manufacture of Biologics.

PubMed

Ishii-Watabe, Akiko; Hirose, Akihiko; Katori, Noriko; Hashii, Norikata; Arai, Susumu; Awatsu, Hirotoshi; Eiza, Akira; Hara, Yoshiaki; Hattori, Hideshi; Inoue, Tomomi; Isono, Tetsuya; Iwakura, Masahiro; Kajihara, Daisuke; Kasahara, Nobuo; Matsuda, Hiroyuki; Murakami, Sei; Nakagawa, Taishiro; Okumura, Takehiro; Omasa, Takeshi; Takuma, Shinya; Terashima, Iyo; Tsukahara, Masayoshi; Tsutsui, Maiko; Yano, Takahiro; Kawasaki, Nana

2015-10-01

Biologics manufacturing technology has made great progress in the last decade. One of the most promising new technologies is the single-use system, which has improved the efficiency of biologics manufacturing processes. To ensure safety of biologics when employing such single-use systems in the manufacturing process, various issues need to be considered including possible extractables/leachables and particles arising from the components used in single-use systems. Japanese pharmaceutical manufacturers, together with single-use suppliers, members of the academia and regulatory authorities have discussed the risks of using single-use systems and established control strategies for the quality assurance of biologics. In this study, we describe approaches for quality risk management when employing single-use systems in the manufacturing of biologics. We consider the potential impact of impurities related to single-use components on drug safety and the potential impact of the single-use system on other critical quality attributes as well as the stable supply of biologics. We also suggest a risk-mitigating strategy combining multiple control methods which includes the selection of appropriate single-use components, their inspections upon receipt and before releasing for use and qualification of single-use systems. Communication between suppliers of single-use systems and the users, as well as change controls in the facilities both of suppliers and users, are also important in risk-mitigating strategies. Implementing these control strategies can mitigate the risks attributed to the use of single-use systems. This study will be useful in promoting the development of biologics as well as in ensuring their safety, quality and stable supply.

High quality factor single-crystal diamond mechanical resonators

NASA Astrophysics Data System (ADS)

Ovartchaiyapong, P.; Pascal, L. M. A.; Myers, B. A.; Lauria, P.; Bleszynski Jayich, A. C.

2012-10-01

Single-crystal diamond is a promising material for microelectromechanical systems (MEMs) because of its low mechanical loss, compatibility with extreme environments, and built-in interface to high-quality spin centers. But its use has been limited by challenges in processing and growth. We demonstrate a wafer bonding-based technique to form diamond on insulator, from which we make single-crystal diamond micromechanical resonators with mechanical quality factors as high as 338 000 at room temperature. Variable temperature measurements down to 10 K reveal a nonmonotonic dependence of quality factor on temperature. These resonators enable integration of single-crystal diamond into MEMs technology for classical and quantum applications.

Tunable bandgap in hybrid perovskite CH{sub 3}NH{sub 3}Pb(Br{sub 3−y}X{sub y}) single crystals and photodetector applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, L.; Duan, R. F.; Huang, F.

We report the synthesis of CH{sub 3}NH{sub 3}Pb(Br{sub 3−y}X{sub y}) (X=Cl and I) single crystals via a stepwise temperature control approach. High-quality CH{sub 3}NH{sub 3}Pb(Br{sub 3−y}X{sub y}) crystals with a tunable bandgap from 1.92 eV to 2.53 eV have been prepared successfully in this way. And further experiments revealed the influence of halogen content and preparation temperature on the structural and optical properties of these crystals. It is observed that chlorine can lower the critical nucleation energy, which results in crystallizing at lower temperature with the chlorine content increasing, while the nucleation energy increases slowly with increasing iodine content. Moreover,more » in contrast to Frank–van der Merwe growth with low heating rate, high heating rate leads to a mass of small size single crystals and Stranski-Krastanov growth. The single crystals with tunable band gap and impressive characteristics enable us to fabricate high performance photodetectors for different wavelengths.« less

Optical sensor based on a single CdS nanobelt.

PubMed

Li, Lei; Yang, Shuming; Han, Feng; Wang, Liangjun; Zhang, Xiaotong; Jiang, Zhuangde; Pan, Anlian

2014-04-23

In this paper, an optical sensor based on a cadmium sulfide (CdS) nanobelt has been developed. The CdS nanobelt was synthesized by the vapor phase transportation (VPT) method. X-Ray Diffraction (XRD) and Transmission Electron Microscopy (TEM) results revealed that the nanobelt had a hexagonal wurtzite structure of CdS and presented good crystal quality. A single nanobelt Schottky contact optical sensor was fabricated by the electron beam lithography (EBL) technique, and the device current-voltage results showed back-to-back Schottky diode characteristics. The photosensitivity, dark current and the decay time of the sensor were 4 × 10⁴, 31 ms and 0.2 pA, respectively. The high photosensitivity and the short decay time were because of the exponential dependence of photocurrent on the number of the surface charges and the configuration of the back to back Schottky junctions.

Effects of Bundle Type and Substitution with Spent Laying Hen Surimi on Quality Characteristics of Imitation Crabsticks.

PubMed

Jin, Sang-Keun; Choi, Jung-Seok; Kim, Gap-Don

2017-01-01

The purpose of this study was to evaluate the effects of bundle type (BT) and substitution with spent laying hen (SH) surimi on quality characteristics of imitation crabsticks made from Alaska Pollack (AP) during 6 wk of cold storage. Diagonally bundled samples had poorer gel characteristics and more lipid oxidation when compared with straight bundled ones ( p <0.05). The color of diagonally bundled imitation crabsticks deteriorated with storage time ( p <0.01). However, BT did not affect sensory characteristics ( p >0.05). SH substitution had an effect on most quality characteristics of imitation crabsticks; darker and poorer gel characteristics were observed and its effect on sensory evaluation was seen at the initial storage. Thus, BT and SH substitution can be considered to have a slight effect on eating quality of imitation crabsticks, despite their negative effects on color, gel characteristics, and lipid oxidation.

What Determines Alumni Generosity?

ERIC Educational Resources Information Center

Baade, Robert A.; Sundberg, Jeffrey O.

1996-01-01

College alumni giving is correlated with institutional characteristics (quality and development efforts) and student characteristics (quality and wealth). This paper uses a two-step least-squares approach with data and quality/wealth variables to explore the "rich-student, quality-school" alumni generosity phenomenon. Alumni giving is…

Single-Case Experimental Designs: A Systematic Review of Published Research and Current Standards

PubMed Central

Smith, Justin D.

2013-01-01

This article systematically reviews the research design and methodological characteristics of single-case experimental design (SCED) research published in peer-reviewed journals between 2000 and 2010. SCEDs provide researchers with a flexible and viable alternative to group designs with large sample sizes. However, methodological challenges have precluded widespread implementation and acceptance of the SCED as a viable complementary methodology to the predominant group design. This article includes a description of the research design, measurement, and analysis domains distinctive to the SCED; a discussion of the results within the framework of contemporary standards and guidelines in the field; and a presentation of updated benchmarks for key characteristics (e.g., baseline sampling, method of analysis), and overall, it provides researchers and reviewers with a resource for conducting and evaluating SCED research. The results of the systematic review of 409 studies suggest that recently published SCED research is largely in accordance with contemporary criteria for experimental quality. Analytic method emerged as an area of discord. Comparison of the findings of this review with historical estimates of the use of statistical analysis indicates an upward trend, but visual analysis remains the most common analytic method and also garners the most support amongst those entities providing SCED standards. Although consensus exists along key dimensions of single-case research design and researchers appear to be practicing within these parameters, there remains a need for further evaluation of assessment and sampling techniques and data analytic methods. PMID:22845874

Quantification of microscopic surface features of single point diamond turned optics with subsequent chemical polishing

NASA Astrophysics Data System (ADS)

Cardenas, Nelson; Kyrish, Matthew; Taylor, Daniel; Fraelich, Margaret; Lechuga, Oscar; Claytor, Richard; Claytor, Nelson

2015-03-01

Electro-Chemical Polishing is routinely used in the anodizing industry to achieve specular surface finishes of various metals products prior to anodizing. Electro-Chemical polishing functions by leveling the microscopic peaks and valleys of the substrate, thereby increasing specularity and reducing light scattering. The rate of attack is dependent of the physical characteristics (height, depth, and width) of the microscopic structures that constitute the surface finish. To prepare the sample, mechanical polishing such as buffing or grinding is typically required before etching. This type of mechanical polishing produces random microscopic structures at varying depths and widths, thus the electropolishing parameters are determined in an ad hoc basis. Alternatively, single point diamond turning offers excellent repeatability and highly specific control of substrate polishing parameters. While polishing, the diamond tool leaves behind an associated tool mark, which is related to the diamond tool geometry and machining parameters. Machine parameters such as tool cutting depth, speed and step over can be changed in situ, thus providing control of the spatial frequency of the microscopic structures characteristic of the surface topography of the substrate. By combining single point diamond turning with subsequent electro-chemical etching, ultra smooth polishing of both rotationally symmetric and free form mirrors and molds is possible. Additionally, machining parameters can be set to optimize post polishing for increased surface quality and reduced processing times. In this work, we present a study of substrate surface finish based on diamond turning tool mark spatial frequency with subsequent electro-chemical polishing.

Solar cells for terrestrial applications

NASA Technical Reports Server (NTRS)

Chernow, F.

1975-01-01

The power efficiency curves of photovoltaic solar cells were investigated as a function of the forbidden energy gap (E sub g) and the current-voltage characteristic of the diode. Minority carrier injection, depletion layer recombination, and interface recombination terms were considered in models for the I-V characteristic. The collection efficiency for photons with energy between (E sub g) and an upper energy cutoff (E sub w) was assumed to be 100% and zero otherwise. Results are presented in terms of a single parameter related to the ratio of depletion layer width and minority carrier diffusion length. It was found that increasing depletion layer recombination shifts the efficiency curves to larger values of the energy without changing the shape of the efficiency curve appreciably. It is believed that similar results would be obtained whenever the quality factors in the exponential energy gap and forward bias terms are equal.

[Sociodemographic and academic profile of nursing students from four Brazilian institutions].

PubMed

Bublitz, Susan; de Azevedo Guido, Laura; Kirchhof, Raquel Soares; Neves, Eliane Tatsch; Lopes, Luis Felipe Dias

2015-03-01

This study aimed to describe the sociodemographic and academic characteristics of nursing students from four Brazilian Educational Institutions. It is a prospective cross-sectional study. The data were collected between April 2011 and March 2012, through a survey form with questions about sociodemographic and academic characteristics of the students. The participants were graduate students enrolled in the nursing course, aged 18 years or older. 705 students participated, and these were mostly women, single, childless, who lived with their families, did not take part in sport activities and performed leisure activities. Also, most students do not participate in research groups, were not granted scholarships, are not employed, are satisfied with the course and do not intend to leave it. This study may become an important tool for the development of strategies that address the needs of students and also improve the quality of the teaching and learning process, reducing dropout rates.

Chronically ill patients' self-management abilities to maintain overall well-being: what is needed to take the next step in the primary care setting?

PubMed

Cramm, Jane Murray; Nieboer, Anna Petra

2015-09-15

Although widespread problems in patient-professional interaction and insufficient support of patients' self-management abilities have been recognized, research investigating the relationships among care quality, productive interaction, and self-management abilities to maintain overall well-being is lacking. Furthermore, studies have revealed differences in these characteristics among certain groups (e.g., less-educated and older patients). This longitudinal study thus aimed to identify relationships among background characteristics, quality of care, productivity of patient-professional interaction, and self-management abilities to maintain overall well-being in chronically ill patients participating in 18 Dutch disease management programs. This longitudinal study included patients participating in 18 Dutch disease management programs. Surveys were administered in 2011 (T1; n = 2191 (out of 4693), 47 % response rate) and 2012 (T2: n = 1722 (out of 4350), 40 % response rate). A total of 1279 patients completed questionnaires at both timepoints (T1 and T2) (27 % response rate). Self-management abilities to maintain well-being were measured using the short (18-item) version of the Self-Management Ability Scale (SMAS-S), patients' perceptions of the productivity of interactions with health care professionals were assessed with the relational coordination instrument and the short (11-item) version of the Patient Assessment of Chronic Illness Care (PACIC-S) was used to assess patients' perceptions of the quality of chronic care delivery. Perceived and objective quality of care and the productivity of patient-professional interaction were found to be related to patients' self-management abilities to maintain overall well-being. These abilities were related negatively to and significantly predicted by low educational level, single status, and older age, despite the mediating role of productive interaction in their relationship with patients' perceptions of care quality. These findings suggest that patient-professional interaction is not yet sufficiently productive to successfully protect against the deterioration of self-management abilities in some groups of chronically ill patients, although such interaction and high-quality care are important factors in such protection. Improvement of the quality of chronic care delivery should thus always be accompanied by investment in high-quality communication and patient-professional relationships.

Piloted simulator investigation of helicopter control systems effects on handling qualities during instrument flight

NASA Technical Reports Server (NTRS)

Forrest, R. D.; Chen, R. T. N.; Gerdes, R. M.; Alderete, T. S.; Gee, D. R.

1979-01-01

An exploratory piloted simulation was conducted to investigate the effects of the characteristics of helicopter flight control systems on instrument flight handling qualities. This joint FAA/NASA study was motivated by the need to improve instrument flight capability. A near-term objective is to assist in updating the airworthiness criteria for helicopter instrument flight. The experiment consisted of variations of single-rotor helicopter types and levels of stability and control augmentation systems (SCAS). These configurations were evaluated during an omnirange approach task under visual and instrument flight conditions. The levels of SCAS design included a simple rate damping system, collective decoupling plus rate damping, and an attitude command system with collective decoupling. A limited evaluation of stick force versus airspeed stability was accomplished. Some problems were experienced with control system mechanization which had a detrimental effect on longitudinal stability. Pilot ratings, pilot commentary, and performance data related to the task are presented.

Runoff infiltration, a desktop case study.

PubMed

Bastien, N R P; Arthur, S; Wallis, S G; Scholz, M

2011-01-01

The use of sustainable drainage systems (SuDS) or best management practice is becoming increasingly common. However, rather than adopting the preferred 'treatment train' implementation, many developments opt for end-of-pipe control ponds. This paper discusses the use of SUDS in series to form treatment trains and compares their potential performance and effectiveness with end-of-pipe solutions. Land-use, site and catchment characteristics have been used alongside up-to-date guidance, Infoworks CS and MUSIC to determine whole-life-costs, land-take, water quality and quantity for different SuDS combinations. The results presented show that the use of a treatment train allows approaches differing from the traditional use of single SuDS, either source or 'end-of-pipe', to be proposed to treat and attenuate runoff. The outcome is a more flexible solution where the footprint allocated to SUDS, costs and water quality can be managed differently to fully meet stakeholder objectives.

Studies on the InAlN/InGaN/InAlN/InGaN double channel heterostructures with low sheet resistance

NASA Astrophysics Data System (ADS)

Zhang, Yachao; Wang, Zhizhe; Xu, Shengrui; Chen, Dazheng; Bao, Weimin; Zhang, Jinfeng; Zhang, Jincheng; Hao, Yue

2017-11-01

High quality InAlN/InGaN/InAlN/InGaN double channel heterostructures were proposed and grown by metal organic chemical vapor deposition. Benefiting from the adoption of the pulsed growth method and Two-Step AlN interlayer, the material quality and interface characteristics of the double channel heterostructures are satisfactory. The results of the temperature-dependent Hall effect measurement indicated that the transport properties of the double channel heterostructures were superior to those of the traditional single channel heterostructures in the whole test temperature range. Meanwhile, the sheet resistance of the double channel heterostructures reached 218.5 Ω/□ at 300 K, which is the record of InGaN-based heterostructures. The good transport properties of the InGaN double channel heterostructures are beneficial to improve the performance of the microwave power devices based on nitride semiconductors.

A Review of Mentoring in Academic Medicine.

PubMed

Geraci, Stephen A; Thigpen, S Calvin

2017-02-01

Many believe that mentoring is essential for new and developing faculty physicians to achieve their professional and personal goals, yet there are both positive and potential negative aspects of mentoring. Research reports on the process have few quantifiable objective outcomes, use mostly single-center study populations, lack controls and use mostly qualitative techniques. Absence of a standardized definition of mentorship has allowed widespread application of the term to other forms of protégé support. Several models have been developed, with other generalized descriptors used to differentiate the important qualities of mentoring relationships. Published evidence suggests some characteristic attitudes and personal qualities, knowledge, skills and behaviors are common among successful mentors. Identification and validation of better efficacy metrics, and use of these to design new programs to train effective mentors, are needed. Copyright © 2017 Southern Society for Clinical Investigation. Published by Elsevier Inc. All rights reserved.

Crystal growth of device quality GaAs in space

NASA Technical Reports Server (NTRS)

Gatos, H. C.; Lagowski, J.

1985-01-01

The present program has been aimed at solving the fundamental and technological problems associated with Crystal Growth of Device Quality in Space. The initial stage of the program was devoted strictly to ground-based research. The unsolved problems associated with the growth of bulk GaAs in the presence of gravitational forces were explored. Reliable chemical, structural and electronic characterization methods were developed which would permit the direct relation of the salient materials parameters (particularly those affected by zero gravity conditions) to the electronic characteristics of single crystal GaAs, in turn to device performance. These relationships are essential for the development of optimum approaches and techniques. It was concluded that the findings on elemental semiconductors Ge and Si regarding crystal growth, segregation, chemical composition, defect interactions, and materials properties-electronic properties relationships are not necessarily applicable to GaAs (and to other semiconductor compounds). In many instances totally unexpected relationships were found to prevail.

An overview of silicon carbide device technology

NASA Technical Reports Server (NTRS)

Neudeck, Philip G.; Matus, Lawrence G.

1992-01-01

Recent progress in the development of silicon carbide (SiC) as a semiconductor is briefly reviewed. This material shows great promise towards providing electronic devices that can operate under the high-temperature, high-radiation, and/or high-power conditions where current semiconductor technologies fail. High quality single crystal wafers have become available, and techniques for growing high quality epilayers have been refined to the point where experimental SiC devices and circuits can be developed. The prototype diodes and transistors that have been produced to date show encouraging characteristics, but by the same token they also exhibit some device-related problems that are not unlike those faced in the early days of silicon technology development. Although these problems will not prevent the implementation of some useful circuits, the performance and operating regime of SiC electronics will be limited until these device-related issues are solved.

Versatile large-mode-area femtosecond laser-written Tm:ZBLAN glass chip lasers.

PubMed

Lancaster, D G; Gross, S; Fuerbach, A; Heidepriem, H Ebendorff; Monro, T M; Withford, M J

2012-12-03

We report performance characteristics of a thulium doped ZBLAN waveguide laser that supports the largest fundamental modes reported in a rare-earth doped planar waveguide laser (to the best of our knowledge). The high mode quality of waveguides up to 45 um diameter (~1075 μm(2) mode-field area) is validated by a measured beam quality of M(2)~1.1 ± 0.1. Benefits of these large mode-areas are demonstrated by achieving 1.9 kW peak-power output Q-switched pulses. The 1.89 μm free-running cw laser produces 205 mW and achieves a 67% internal slope efficiency corresponding to a quantum efficiency of 161%. The 9 mm long planar chip developed for concept demonstration is rapidly fabricated by single-step optical processing, contains 15 depressed-cladding waveguides, and can operate in semi-monolithic or external cavity laser configurations.

Impact of fowlpox-vectored Mycoplasma gallisepticum vaccine Vectormune FP MG on layer hen egg production and egg quality parameters.

PubMed

Leigh, S A; Branton, S L; Evans, J D; Collier, S D

2013-12-01

This study was conducted to determine the impact of vaccination with Vectormune FP MG on egg production and egg quality characteristics of Single Comb White Leghorn hens. Due to questions of the efficacy of this vaccine in preventing Mycoplasma gallisepticum-mediated pathology, the ability of this vaccine to protect against postproduction-peak egg losses associated with F-strain M. gallisepticum (FMG) vaccination was also investigated. Vaccination with Vectormune FP MG did not result in any significant change in egg production or egg quality parameters compared with control (unvaccinated) hens. Subsequent revaccination with FMG at 45 wk of age (woa) yielded no impact on egg production or egg quality parameters of Vectormune FP MG vaccinated hens, unlike prior results for postproduction-peak vaccination of M. gallisepticum-clean hens with FMG, which exhibited a drop in egg production of approximately 6%. No difference in egg size distribution was observed for any of the treatment groups before or after FMG revaccination. These results suggest that hens can be safely vaccinated with Vectormune FP MG as pullets and can be revaccinated with a live M. gallisepticum vaccine such as FMG at a later date with no deleterious effects on egg production or egg or eggshell quality parameters.

Quality of life in patients with vitiligo: an analysis of the dermatology life quality index outcome over the past two decades.

PubMed

Amer, Abdulrahman A A; Gao, Xing-Hua

2016-06-01

Vitiligo is one of the most important skin disorders that does not cause much physical impairment, but due to its disfiguring appearance, patients have disturbances in mental health and quality of life (QoL). The dermatology life quality index (DLQI), as one of the most specific QoL instruments, is now used widely for patients with vitiligo. The main objective of this review is to collect and present detailed information about issues and disturbances related to the QoL of patients with vitiligo by reviewing the DLQI studies worldwide in the past 20 years. The impact of vitiligo assessed by the DLQI varies according to the clinical and demographic characteristics of patients. In the majority of our reviewed studies, women showed more QoL impairment than men did, as did young patients compared to elderly ones, married women with vitiligo than singles, and patients with involvement on exposed sites than those on unexposed sites. Dark-skinned people showed more life quality effects than white people did. Dermatologists should pay particular attention to such patients who experience insufficient QoL, as they require more effort to cure their disease. © 2016 The International Society of Dermatology.

Monitoring and Assessment of Youshui River Water Quality in Youyang

NASA Astrophysics Data System (ADS)

Wang, Xue-qin; Wen, Juan; Chen, Ping-hua; Liu, Na-na

2018-02-01

By monitoring the water quality of Youshui River from January 2016 to December 2016, according to the indicator grading and the assessment standard of water quality, the formulas for 3 types water quality indexes are established. These 3 types water quality indexes, the single indicator index Ai, single moment index Ak and the comprehensive water quality index A, were used to quantitatively evaluate the quality of single indicator, the water quality and the change of water quality with time. The results show that, both total phosphorus and fecal coliform indicators exceeded the standard, while the other 16 indicators measured up to the standard. The water quality index of Youshui River is 0.93 and the grade of water quality comprehensive assessment is level 2, which indicated that the water quality of Youshui River is good, and there is room for further improvement. To this end, several protection measures for Youshui River environmental management and pollution treatment are proposed.

Determining the use of prophylactic antibiotics in breast cancer surgeries: a survey of practice

PubMed Central

2012-01-01

Background Prophylactic antibiotics (PAs) are beneficial to breast cancer patients undergoing surgery because they prevent surgical site infection (SSI), but limited information regarding their use has been published. This study aims to determine the use of PAs prior to breast cancer surgery amongst breast surgeons in Colombia. Methods An online survey was distributed amongst the breast surgeon members of the Colombian Association of Mastology, the only breast surgery society of Colombia. The scope of the questions included demographics, clinical practice characteristics, PA prescription characteristics, and the use of PAs in common breast surgical procedures. Results The survey was distributed amongst eighty-eight breast surgeons of whom forty-seven responded (response rate: 53.4%). Forty surgeons (85.1%) reported using PAs prior to surgery of which >60% used PAs during mastectomy, axillary lymph node dissection, and/or breast reconstruction. Surgeons reported they targeted the use of PAs in cases in which patients had any of the following SSI risk factors: diabetes mellitus, drains in situ, obesity, and neoadjuvant therapy. The distribution of the self-reported PA dosing regimens was as follows: single pre-operative fixed-dose (27.7%), single preoperative dose followed by a second dose if the surgery was prolonged (44.7%), single preoperative dose followed by one or more postoperative doses for >24 hours (10.6%), and single preoperative weight-adjusted dose (2.1%). Conclusion Although this group of breast surgeons is aware of the importance of PAs in breast cancer surgery there is a discrepancy in how they use it, specifically with regards to prescription and timeliness of drug administration. Our findings call for targeted quality-improvement initiatives, such as standardized national guidelines, which can provide sufficient evidence for all stakeholders and therefore facilitate best practice medicine for breast cancer surgery. PMID:22937833

Determining the use of prophylactic antibiotics in breast cancer surgeries: a survey of practice.

PubMed

Acuna, Sergio A; Angarita, Fernando A; Escallon, Jaime; Tawil, Mauricio; Torregrosa, Lilian

2012-08-31

Prophylactic antibiotics (PAs) are beneficial to breast cancer patients undergoing surgery because they prevent surgical site infection (SSI), but limited information regarding their use has been published. This study aims to determine the use of PAs prior to breast cancer surgery amongst breast surgeons in Colombia. An online survey was distributed amongst the breast surgeon members of the Colombian Association of Mastology, the only breast surgery society of Colombia. The scope of the questions included demographics, clinical practice characteristics, PA prescription characteristics, and the use of PAs in common breast surgical procedures. The survey was distributed amongst eighty-eight breast surgeons of whom forty-seven responded (response rate: 53.4%). Forty surgeons (85.1%) reported using PAs prior to surgery of which >60% used PAs during mastectomy, axillary lymph node dissection, and/or breast reconstruction. Surgeons reported they targeted the use of PAs in cases in which patients had any of the following SSI risk factors: diabetes mellitus, drains in situ, obesity, and neoadjuvant therapy. The distribution of the self-reported PA dosing regimens was as follows: single pre-operative fixed-dose (27.7%), single preoperative dose followed by a second dose if the surgery was prolonged (44.7%), single preoperative dose followed by one or more postoperative doses for >24 hours (10.6%), and single preoperative weight-adjusted dose (2.1%). Although this group of breast surgeons is aware of the importance of PAs in breast cancer surgery there is a discrepancy in how they use it, specifically with regards to prescription and timeliness of drug administration. Our findings call for targeted quality-improvement initiatives, such as standardized national guidelines, which can provide sufficient evidence for all stakeholders and therefore facilitate best practice medicine for breast cancer surgery.

Quantifying nonpoint source emissions and their water quality responses in a complex catchment: A case study of a typical urban-rural mixed catchment

NASA Astrophysics Data System (ADS)

Chen, Lei; Dai, Ying; Zhi, Xiaosha; Xie, Hui; Shen, Zhenyao

2018-04-01

As two key threats to receiving water bodies, the generation mechanisms and processes of urban and agricultural nonpoint sources (NPSs) show clear differences, which lead to distinct characteristics of water quality responses with mixed land-uses catchments compared to single land-use ones. However, few studies have provided such insights in these characteristic or quantified different water environment responses to NPS pollution. In this study, an integrated modelling approach was developed for those complex catchments by combining three commonly used models: SWMM (Storm Water Management Model), SWAT (Soil and Water Assessment Tool) and MIKE 11. A case study was performed in a typical urban-rural catchment of Chao Lake, China. The simulated results indicated that urban NPS pollution responded sensitively to rainfall events and was greatly affected by the antecedent dry days. Compare to urban NPS, agricultural NPS pollution was characterized with the time-lag to rainfall depended on soil moisture and the post-rain-season emissions carried by lateral flows, and were also affected by the local farm-practice schedule. With comprehensive impacts from urban-rural land-uses, the time-interleaved urban and agricultural NPS pollution emissions and more abundant pollution accumulation both led to a decrease in the responsive time and an increase in the frequency of peak pollution concentration values even during the dry season. These obtained characteristics can provide guidance for drafting watershed management plans in similar mixed land use catchments.

Analysis of Clinicians' Perceptual Cough Evaluation.

PubMed

Laciuga, Helena; Brandimore, Alexandra E; Troche, Michelle S; Hegland, Karen W

2016-08-01

This study examined the relationships between subjective descriptors and objective airflow measures of cough. We hypothesized that coughs with specific airflow characteristics would share common subjective perceptual descriptions. Thirty clinicians (speech-language pathologists, otolaryngologists, and neurologists) perceptually evaluated ten cough audio samples with specific airflow characteristics determined by peak expiratory flow rate, cough expired volume, cough duration, and number of coughs in the cough epoch. Participants rated coughs by strength, duration, quality, quantity, and overall potential effectiveness for airway protection. Perception of cough strength and effectiveness was determined by the combination of presence of pre-expulsive compression phase, short peak expiratory airflow rate rise time, high peak expiratory flow rates, and high cough volume acceleration. Perception of cough abnormality was defined predominantly by descriptors of breathiness and strain. Breathiness was characteristic for coughs with either absent compression phases and relatively high expiratory airflow rates or coughs with significantly low expired volumes and reduced peak flow rates. In contrast, excessive strain was associated with prolonged compression phases and low expiratory airflow rates or the absence of compression phase with high peak expiratory rates. The study participants reached greatest agreement in distinguishing between single and multiple coughs. Their assessment of cough strength and effectiveness was less consistent. Finally, the least agreement was shown in determining the quality categories. Modifications of cough airflow can influence perceptual cough evaluation outcomes. However, the inconsistency of cough ratings among our participants suggests that a uniform cough rating system is required.

[Influence of stress factors and socio-demographic characteristics on the sleep quality of nursing students].

PubMed

Benavente, Sonia Betzabeth Ticona; Silva, Rodrigo Marques da; Higashi, Aline Baraldi; Guido, Laura de Azevedo; Costa, Ana Lucia Siqueira

2014-06-01

To analyze the influence of stress factors and socio-demographic characteristics on the sleep quality of nursing students. An analytical cross-sectional and quantitative study, conducted with 151 nursing students in São Paulo between March and April of 2012. A form for socio-demographic characteristics, the Instrument to Evaluate Stress in Nursing Students and the Pittsburgh Sleep Index were applied. High levels of stress was predominant for Time Management (27.8%) and Professional Training (30.5%) and low sleep quality (78.8%). The Professional Communication, Professional Training and Theoretical Activity are positively correlated to sleep quality. Work activity, academic year and time for daily studies contributed to a low quality of sleep. Few stress factors from the academic environment and some socio-demographic characteristics contributed to the reduction of sleep quality in students.

Epidemiology characteristics, reporting characteristics, and methodological quality of systematic reviews and meta-analyses on traditional Chinese medicine nursing interventions published in Chinese journals.

PubMed

Yang, Min; Jiang, Li; Wang, Aihong; Xu, Guihua

2017-02-01

To evaluate the epidemiological characteristics, reporting characteristics, and methodological quality of systematic reviews in the traditional Chinese medicine nursing field published in Chinese journals. The number of systematic reviews in the traditional Chinese medicine nursing field has increased, but their epidemiology, quality, and reporting characteristics have not been assessed completely. We generated an overview of reviews using a narrative approach. Four Chinese databases were searched for systematic reviews from inception to December 2015. The Preferred Reporting Items of Systematic Reviews and Meta-analyses and the Assessment of Multiple Systematic Reviews checklists were adopted to evaluate reporting and methodological quality, respectively. A total of 73 eligible systematic reviews, published from 2005 to 2015, were included. The deficiencies in reporting characteristics mainly lay in the lack of structured abstract or protocol, incomplete reporting of search strategies, study selection, and risk of bias. The deficiencies in methodological quality were reflected in the lack of a priori design and conflict of interest, incomplete literature searches, and assessment of publication bias. The quality of the evaluated reviews was unsatisfactory; attention should be paid to the improvement of reporting and methodological quality in the conduct of systematic reviews. © 2016 John Wiley & Sons Australia, Ltd.

[Value of sepsis single-disease manage system in predicting mortality in patients with sepsis].

PubMed

Chen, J; Wang, L H; Ouyang, B; Chen, M Y; Wu, J F; Liu, Y J; Liu, Z M; Guan, X D

2018-04-03

Objective: To observe the effect of sepsis single-disease manage system on the improvement of sepsis treatment and the value in predicting mortality in patients with sepsis. Methods: A retrospective study was conducted. Patients with sepsis admitted to the Department of Surgical Intensive Care Unit of Sun Yat-Sen University First Affiliated Hospital from September 22, 2013 to May 5, 2015 were enrolled in this study. Sepsis single-disease manage system (Rui Xin clinical data manage system, China data, China) was used to monitor 25 clinical quality parameters, consisting of timeliness, normalization and outcome parameters. Based on whether these quality parameters could be completed or not, the clinical practice was evaluated by the system. The unachieved quality parameter was defined as suspicious parameters, and these suspicious parameters were used to predict mortality of patients with receiver operating characteristic curve (ROC). Results: A total of 1 220 patients with sepsis were enrolled, included 805 males and 415 females. The mean age was (59±17) years, and acute physiology and chronic health evaluation (APACHE Ⅱ) scores was 19±8. The area under ROC curve of total suspicious numbers for predicting 28-day mortality was 0.70; when the suspicious parameters number was more than 6, the sensitivity was 68.0% and the specificity was 61.0% for predicting 28-day mortality. In addition, the area under ROC curve of outcome suspicious number for predicting 28-day mortality was 0.89; when the suspicious outcome parameters numbers was more than 1, the sensitivity was 88.0% and the specificity was 78.0% for predicting 28-day mortality. Moreover, the area under ROC curve of total suspicious number for predicting 90-day mortality was 0.73; when the total suspicious parameters number was more than 7, the sensitivity was 60.0% and the specificity was 74.0% for predicting 90-day mortality. Finally, the area under ROC curve of outcome suspicious numbers for predicting 90-day mortality was 0.92; when suspicious outcome parameters numbers was more than 1, the sensitivity was 88.0% and the specificity was 81.0% for predicting 90-day mortality. Conclusion: The single center study suggests that this sepsis single-disease manage system could be used to monitor the completion of clinical practice for intensivist in managing sepsis, and the number of quality parameters failed to complete could be used to predict the mortality of the patients.

A novel single-nucleotide polymorphism of the visfatin gene and its associations with performance traits in the chicken.

PubMed

Han, R-L; Lan, X-Y; Zhang, L-Z; Ren, G; Jing, Y-J; Li, M-J; Zhang, B; Zhao, M; Guo, Y-K; Kang, X-T; Chen, H

2010-01-01

Visfatin is a peptide that is predominantly expressed in visceral adipose tissue and is hypothesized to be related to obesity and insulin resistance. In this study, a novel silent single-nucleotide polymorphism (SNP) was found in exon 7 of the chicken visfatin gene (also known as PBEF1) by single-stranded conformation polymorphism (SSCP) and DNA sequencing. In total, 836 chickens forming an F2 resource population of Gushi chicken crossed with Anka broiler were genotyped by XbaI forced RFLP, and the associations of this polymorphism with chicken growth, carcass characteristics, and meat quality were analyzed. Significant associations were found between the polymorphism and 4-week body weight (BW4), 6-week body weight (BW6), 4-week body slanting length (BSL4), fat bandwidth (FBW), breast muscle water loss rate (BWLR) and breast muscle fiber density (BFD) (P < 0.05), as well as 4-week breastbone length (BBL4) (P < 0.01). These observations suggested that the polymorphism in exon7 of the visfatin gene had significant effects on the early growth traits of chicken.

Single-Mode Near-Infrared Lasing in a GaAsSb-Based Nanowire Superlattice at Room Temperature.

PubMed

Ren, Dingding; Ahtapodov, Lyubomir; Nilsen, Julie S; Yang, Jianfeng; Gustafsson, Anders; Huh, Junghwan; Conibeer, Gavin J; van Helvoort, Antonius T J; Fimland, Bjørn-Ove; Weman, Helge

2018-04-11

Semiconductor nanowire lasers can produce guided coherent light emission with miniaturized geometry, bringing about new possibilities for a variety of applications including nanophotonic circuits, optical sensing, and on-chip and chip-to-chip optical communications. Here, we report on the realization of single-mode and room-temperature lasing from 890 to 990 nm, utilizing a novel design of single nanowires with GaAsSb-based multiple axial superlattices as a gain medium under optical pumping. The control of lasing wavelength via compositional tuning with excellent room-temperature lasing performance is shown to result from the unique nanowire structure with efficient gain material, which delivers a low lasing threshold of ∼6 kW/cm 2 (75 μJ/cm 2 per pulse), a lasing quality factor as high as 1250, and a high characteristic temperature of ∼129 K. These results present a major advancement for the design and synthesis of nanowire laser structures, which can pave the way toward future nanoscale integrated optoelectronic systems with superior performance.

Operation of low-noise single-gap RPC modules exposed to ionisation rates up to 1 kHz /cm2

NASA Astrophysics Data System (ADS)

Ćwiok, M.; Dominik, W.; Górski, M.; Królikowski, J.

2004-11-01

Two single gap medium-size RPC modules, made of bakelite plates of very good mechanical quality of the surface and having initial volume resistivity of 1 ×1010 Ω cm, were tested in the Gamma Irradiation Facility at CERN at ionisation rates up to 1 kHz /cm2. The internal surfaces facing the gas volume of one RPC module were cladded with a thin layer of linseed oil varnish for comparison of oiled and non-oiled RPC operation. The results refer to the gas mixture of C2H2F4/isobutane (97:3) with SF6 addition below 1%. The single gap modules exhibited full detection efficiency plateau for the high voltage range of about 1 kV at full intensity of gamma rays. Good timing characteristics allowed to reach 95% efficiency at fully opened irradiation source with time window of 20 ns. The intrinsic noise rate for a non-oiled and an oiled RPC gap was, respectively, below 5 and 1 Hz /cm2 at full efficiency over 1 kV voltage range.

[Responses of soil microbial carbon metabolism to the leaf litter composition in Liaohe River Nature Reserve of northern Hebei Province, China].

PubMed

Li, Tian-yu; Kang, Feng-feng; Han, Hai-rong; Gao, Jing; Song, Xiao-shuai; Yu, Shu; Zhao, Jin-long; Yu, Xiao-wen

2015-03-01

Using litter bag method, we studied the effects of single and mixed litters from Betula platyphlla, Populus davidiana and Quercus mongolica on soil microbial biomass carbon (MBC), microbial respiration (MR) and microbial metabolic quotient (qCO2) in 0-5, 5-10 and 10-20 cm soil layers. The results showed that the average contents of MBC in 0-20 cm soil layer were 124.84, 325.29, 349.79 and 319.02 mg . kg-1 in the leaf litter removal treatment, Betula platyphlla treatment, Populus davidiana treatment and Quercus mongolica treatment, and the corresponding average rates of MR were 0.66, 1.12, 1.16 and 1.10 µg . g-1 . h-1, respectively. Meanwhile, in 0-20 cm soil layer, the average contents of MBC in the treatments with single leaf litter, mixed litter of two plant species and mixed litter of three plant species were 331. 37, 418. 52 and 529. 34 mg . kg-1, and the corresponding average rates of MR were 1.13, 1.30 and 1.46 µg . g-1 . h-1, respectively. In contrast to the MBC and MR, qCO2 in soil showed a reverse pattern. Our study suggested that characteristics of microbial carbolic metabolism were influenced by litter quality. Namely, the treatment with high litter quality had higher MBC, MR and utilization efficiency of soil carbon, compared with the treatment with low litter quality. Moreover, mixture of different species of leaf litter improved soil microbial activities, increased utilization efficiency on soil carbon and promoted diversity of microbial metabolic pathways, which could then contribute to maintaining and enhancing soil quality of forestland.

Characteristics of a global classification system for perinatal deaths: a Delphi consensus study.

PubMed

Wojcieszek, Aleena M; Reinebrant, Hanna E; Leisher, Susannah Hopkins; Allanson, Emma; Coory, Michael; Erwich, Jan Jaap; Frøen, J Frederik; Gardosi, Jason; Gordijn, Sanne; Gulmezoglu, Metin; Heazell, Alexander E P; Korteweg, Fleurisca J; McClure, Elizabeth; Pattinson, Robert; Silver, Robert M; Smith, Gordon; Teoh, Zheyi; Tunçalp, Özge; Flenady, Vicki

2016-08-15

Despite the global burden of perinatal deaths, there is currently no single, globally-acceptable classification system for perinatal deaths. Instead, multiple, disparate systems are in use world-wide. This inconsistency hinders accurate estimates of causes of death and impedes effective prevention strategies. The World Health Organisation (WHO) is developing a globally-acceptable classification approach for perinatal deaths. To inform this work, we sought to establish a consensus on the important characteristics of such a system. A group of international experts in the classification of perinatal deaths were identified and invited to join an expert panel to develop a list of important characteristics of a quality global classification system for perinatal death. A Delphi consensus methodology was used to reach agreement. Three rounds of consultation were undertaken using a purpose built on-line survey. Round one sought suggested characteristics for subsequent scoring and selection in rounds two and three. The panel of experts agreed on a total of 17 important characteristics for a globally-acceptable perinatal death classification system. Of these, 10 relate to the structural design of the system and 7 relate to the functional aspects and use of the system. This study serves as formative work towards the development of a globally-acceptable approach for the classification of the causes of perinatal deaths. The list of functional and structural characteristics identified should be taken into consideration when designing and developing such a system.

Rural-Urban Differences in Medicare Quality Outcomes and the Impact of Risk Adjustment.

PubMed

Henning-Smith, Carrie; Kozhimannil, Katy; Casey, Michelle; Prasad, Shailendra; Moscovice, Ira

2017-09-01

There has been considerable debate in recent years about whether, and how, to risk-adjust quality measures for sociodemographic characteristics. However, geographic location, especially rurality, has been largely absent from the discussion. To examine differences by rurality in quality outcomes, and the impact of adjustment for individual and community-level sociodemographic characteristics on quality outcomes. The 2012 Medicare Current Beneficiary Survey, Access to Care module, combined with the 2012 County Health Rankings. All data used were publicly available, secondary data. We merged the 2012 Medicare Current Beneficiary Survey data with the 2012 County Health Rankings data using county of residence. We compared 6 unadjusted quality of care measures for Medicare beneficiaries (satisfaction with care, blood pressure checked, cholesterol checked, flu shot receipt, change in health status, and all-cause annual readmission) by rurality (rural noncore, micropolitan, and metropolitan). We then ran nested multivariable logistic regression models to assess the impact of adjusting for community and individual-level sociodemographic characteristics to determine whether these mediate the rurality difference in quality of care. The relationship between rurality and change in health status was mediated by the inclusion of community-level characteristics; however, adjusting for community and individual-level characteristics caused differences by rurality to emerge in 2 of the measures: blood pressure checked and cholesterol checked. For all quality scores, model fit improved after adding community and individual characteristics. Quality is multifaceted and is impacted by individual and community-level socio-demographic characteristics, as well as by geographic location. Current debates about risk-adjustment procedures should take rurality into account.

The Impact of Hospital’s Cardiac Specialization on Outcomes after Coronary Artery Bypass Graft Surgery: Analysis of Medicare Claims Data

PubMed Central

Girotra, Saket; Lu, Xin; Popescu, Ioana; Vaughan-Sarrazin, Mary; Horwitz, Phillip A.; Cram, Peter

2011-01-01

Background Hospital volume has been widely embraced as a proxy measure for hospital quality; little attention has been focused on an alternative quality measure-hospital specialization. Even though specialization occurs on a continuum, previous studies have only focused on a small number of highly specialized hospitals (single-specialty hospitals). Studies on the broad relationship between hospital specialization and outcomes after coronary artery bypass grafting (CABG) are limited. Methods and Results We conducted a retrospective cohort study of 705,084 Medicare patients (1130 hospitals) who underwent CABG during 2001-2005. We stratified hospitals into quintiles based on their degree of cardiac specialization (proportion of a hospital’s Medicare discharges classified as Major Diagnostic Category 5 – cardiovascular diseases). We compared patient and hospital characteristics and outcomes across quintiles of cardiac specialization. Patient characteristics were generally similar across quintiles, but mean annual CABG volume increased progressively from quintile 1 (least-specialized) to quintile 5 (most-specialized). Unadjusted 30-day mortality was similar at hospitals in quintiles 1-4 (4.8%), except quintile 5 where mortality was lower (4.3%). A strong inverse association was seen between hospital cardiac specialization and 30-day mortality after adjustment for patient characteristics (P trend=0.001). However, this was no longer significant after additional adjustment for CABG volume (P trend=0.65). Results were similar for other mortality outcomes and length of stay. Conclusions After accounting for patient characteristics and CABG volume, greater cardiac specialization was not associated with clinically significant improvement in patient outcomes. This study calls into question the benefit of cardiac specialization for the vast majority of CABG-performing U.S. hospitals. PMID:20923993

Teacher's Assessment of the Quality of Their Schools.

ERIC Educational Resources Information Center

Davis, Voyia

Thirty-eight teachers completed the Illinois Quality Schools Index Survey, which measured teachers' attitudes towards characteristics of quality schools. The majority of the teachers felt that the characteristics indicative of a quality school were often implemented in their school. Over half the teachers felt that their schools often or always…

Identifying overarching excipient properties towards an in-depth understanding of process and product performance for continuous twin-screw wet granulation.

PubMed

Willecke, N; Szepes, A; Wunderlich, M; Remon, J P; Vervaet, C; De Beer, T

2017-04-30

The overall objective of this work is to understand how excipient characteristics influence the process and product performance for a continuous twin-screw wet granulation process. The knowledge gained through this study is intended to be used for a Quality by Design (QbD)-based formulation design approach and formulation optimization. A total of 9 preferred fillers and 9 preferred binders were selected for this study. The selected fillers and binders were extensively characterized regarding their physico-chemical and solid state properties using 21 material characterization techniques. Subsequently, principal component analysis (PCA) was performed on the data sets of filler and binder characteristics in order to reduce the variety of single characteristics to a limited number of overarching properties. Four principal components (PC) explained 98.4% of the overall variability in the fillers data set, while three principal components explained 93.4% of the overall variability in the data set of binders. Both PCA models allowed in-depth evaluation of similarities and differences in the excipient properties. Copyright © 2017. Published by Elsevier B.V.

Vortex Airy beams directly generated via liquid crystal q-Airy-plates

NASA Astrophysics Data System (ADS)

Wei, Bing-Yan; Liu, Sheng; Chen, Peng; Qi, Shu-Xia; Zhang, Yi; Hu, Wei; Lu, Yan-Qing; Zhao, Jian-Lin

2018-03-01

Liquid crystal q-Airy-plates with director distributions integrated by q-plates and polarization Airy masks are proposed and demonstrated via the photoalignment technique. Single/dual vortex Airy beams of opposite topological charges and orthogonal circular polarizations are directly generated with polarization-controllable characteristic. The singular phase of the vortex part is verified by both astigmatic transformation and digital holography. The trajectory of vortex Airy beams is investigated, manifesting separate propagation dynamics of optical vortices and Airy beams. Meanwhile, Airy beams still keep their intrinsic transverse acceleration, self-healing, and nondiffraction features. This work provides a versatile candidate for generating high-quality vortex Airy beams.

Cochlear implant in Hong Kong Cantonese.

PubMed

Tang, S O; Luk, W S; Lau, C C; So, K W; Wong, C M; Yiu, M L; Kwok, C L

1990-11-01

Cochlear implant surgery was performed in four Cantonese-speaking postlingually deaf Chinese adults, using the House/3M single channel device. This article outlines the methodology, including preoperative assessment and postoperative rehabilitation; and explains the necessary modifications in speech and audiologic work-up in Cantonese-speaking patients. Salient features of Cantonese phonetics, especially its tonal characteristics, are described. The findings of the study are presented. The results of the cochlear implant would suggest a performance superior to that of the hearing aid. Furthermore, the cochlear implant is able to detect tonal cues. This quality of the cochlear implant may prove to be a valuable asset to a tonal language-speaking cochlear implantee.

Factors influencing the implementation of clinical guidelines for health care professionals: a systematic meta-review.

PubMed

Francke, Anneke L; Smit, Marieke C; de Veer, Anke J E; Mistiaen, Patriek

2008-09-12

Nowadays more and more clinical guidelines for health care professionals are being developed. However, this does not automatically mean that these guidelines are actually implemented. The aim of this meta-review is twofold: firstly, to gain a better understanding of which factors affect the implementation of guidelines, and secondly, to provide insight into the "state-of-the-art" regarding research within this field. A search of five literature databases and one website was performed to find relevant existing systematic reviews or meta-reviews. Subsequently, a two-step inclusion process was conducted: (1) screening on the basis of references and abstracts and (2) screening based on full-text papers. After that, relevant data from the included reviews were extracted and the methodological quality of the reviews was assessed by using the Quality Assessment Checklist for Reviews. Twelve systematic reviews met our inclusion criteria. No previous systematic meta-reviews meeting all our inclusion criteria were found. Two of the twelve reviews scored high on the checklist used, indicating only "minimal" or "minor flaws". The other ten reviews scored in the lowest of middle ranges, indicating "extensive" or "major" flaws. A substantial proportion (although not all) of the reviews indicates that effective strategies often have multiple components and that the use of one single strategy, such as reminders only or an educational intervention, is less effective. Besides, characteristics of the guidelines themselves affect actual use. For instance, guidelines that are easy to understand, can easily be tried out, and do not require specific resources, have a greater chance of implementation. In addition, characteristics of professionals - e.g., awareness of the existence of the guideline and familiarity with its content - likewise affect implementation. Furthermore, patient characteristics appear to exert influence: for instance, co-morbidity reduces the chance that guidelines are followed. Finally, environmental characteristics may influence guideline implementation. For example, a lack of support from peers or superiors, as well as insufficient staff and time, appear to be the main impediments. Existing reviews describe various factors that influence whether guidelines are actually used. However, the evidence base is still thin, and future sound research - for instance comparing combinations of implementation strategies versus single strategies - is needed.

[Watershed water environment pollution models and their applications: a review].

PubMed

Zhu, Yao; Liang, Zhi-Wei; Li, Wei; Yang, Yi; Yang, Mu-Yi; Mao, Wei; Xu, Han-Li; Wu, Wei-Xiang

2013-10-01

Watershed water environment pollution model is the important tool for studying watershed environmental problems. Through the quantitative description of the complicated pollution processes of whole watershed system and its parts, the model can identify the main sources and migration pathways of pollutants, estimate the pollutant loadings, and evaluate their impacts on water environment, providing a basis for watershed planning and management. This paper reviewed the watershed water environment models widely applied at home and abroad, with the focuses on the models of pollutants loading (GWLF and PLOAD), water quality of received water bodies (QUAL2E and WASP), and the watershed models integrated pollutant loadings and water quality (HSPF, SWAT, AGNPS, AnnAGNPS, and SWMM), and introduced the structures, principles, and main characteristics as well as the limitations in practical applications of these models. The other models of water quality (CE-QUAL-W2, EFDC, and AQUATOX) and watershed models (GLEAMS and MIKE SHE) were also briefly introduced. Through the case analysis on the applications of single model and integrated models, the development trend and application prospect of the watershed water environment pollution models were discussed.

Ultrafast Growth of High-Quality Monolayer WSe2 on Au.

PubMed

Gao, Yang; Hong, Yi-Lun; Yin, Li-Chang; Wu, Zhangting; Yang, Zhiqing; Chen, Mao-Lin; Liu, Zhibo; Ma, Teng; Sun, Dong-Ming; Ni, Zhenhua; Ma, Xiu-Liang; Cheng, Hui-Ming; Ren, Wencai

2017-08-01

The ultrafast growth of high-quality uniform monolayer WSe 2 is reported with a growth rate of ≈26 µm s -1 by chemical vapor deposition on reusable Au substrate, which is ≈2-3 orders of magnitude faster than those of most 2D transition metal dichalcogenides grown on nonmetal substrates. Such ultrafast growth allows for the fabrication of millimeter-size single-crystal WSe 2 domains in ≈30 s and large-area continuous films in ≈60 s. Importantly, the ultrafast grown WSe 2 shows excellent crystal quality and extraordinary electrical performance comparable to those of the mechanically exfoliated samples, with a high mobility up to ≈143 cm 2 V -1 s -1 and ON/OFF ratio up to 9 × 10 6 at room temperature. Density functional theory calculations reveal that the ultrafast growth of WSe 2 is due to the small energy barriers and exothermic characteristic for the diffusion and attachment of W and Se on the edges of WSe 2 on Au substrate. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effect of extrusion conditions on physicochemical and sensorial properties of corn-broad beans (Vicia faba) spaghetti type pasta.

PubMed

Giménez, M A; González, R J; Wagner, J; Torres, R; Lobo, M O; Samman, N C

2013-01-15

Corn-broad bean spaghetti type pasta was made with a corn/broad bean flour blend in a 70:30 ratio, through an extrusion-cooking process (Brabender 10 DN single-screw extruder with a 3:1 compression ratio). The effect of temperature (T=80, 90 and 100°C) and moisture (M=28%, 31% and 34%) on the extrusion responses (specific consumption of mechanical energy and pressure) and the quality of this pasta-like product (expansion, cooking-related losses, water absorption, firmness and stickiness) was assessed. The structural changes of starch were studied by means of DSC and XRD. The extrusion-cooking process, at M=28% and T=100°C, is appropriate to obtain corn-broad bean spaghetti-type pasta with high protein and dietary fibre content and adequate quality. The cooking characteristics and resistance to overcooking depended on the degree of gelatinisation and formation of amylose-lipid complexes. The critical gelatinisation point was 46.55%; beyond that point, the quality of the product declines. Copyright © 2012 Elsevier Ltd. All rights reserved.

Quality Indicators for Single-Case Research on Social Skill Interventions for Children with Autistic Spectrum Disorder

ERIC Educational Resources Information Center

Wang, Shin-Yi; Parrila, Rauno

2008-01-01

In this paper, we describe a quality checklist that parents, teachers, clinicians, and policy-makers with basic research skills can use to systematically evaluate the methodological quality of single-case studies on social skill training of children with autistic spectrum disorder (ASD). We provide a rationale for included quality indicators, and…

Temporal and spatial distribution characteristics and influencing factors of air quality index in Xuchang

NASA Astrophysics Data System (ADS)

Wang, Zhenghua; Tian, Zhihui

2018-01-01

In recent years, the problem of air pollution becomes more and more serious. Based on the geographic and seasonal climatic characteristics of Xuchang City, this paper studies the temporal and spatial distribution characteristics of air quality index. The results show that: from the time point of view, air quality index shows seasonal difference. Air quality index is highest in winter and is lowest in summer. From the space point of view, there are differences between the north and the south to a certain extent. Changge City, Yuzhou city and central Xuchang county is higher than the southeast of Xiangcheng county and Yanling county. The spatial and temporal variation characteristics of air quality index in Xuchang are influenced by natural factors and human activities, and the economic development and population are the important factors affecting the urban air quality.

24-h Efficacy of Glaucoma Treatment Options.

PubMed

Konstas, Anastasios G P; Quaranta, Luciano; Bozkurt, Banu; Katsanos, Andreas; Garcia-Feijoo, Julian; Rossetti, Luca; Shaarawy, Tarek; Pfeiffer, Norbert; Miglior, Stefano

2016-04-01

Current management of glaucoma entails the medical, laser, or surgical reduction of intraocular pressure (IOP) to a predetermined level of target IOP, which is commensurate with either stability or delayed progression of visual loss. In the published literature, the hypothesis is often made that IOP control implies a single IOP measurement over time. Although the follow-up of glaucoma patients with single IOP measurements is quick and convenient, such measurements often do not adequately reflect the untreated IOP characteristics, or indeed the quality of treated IOP control during the 24-h cycle. Since glaucoma is a 24-h disease and the damaging effect of elevated IOP is continuous, it is logical that we should aim to understand the efficacy of all treatment options throughout the 24-h period. This article first reviews the concept and value of diurnal and 24-h IOP monitoring. It then critically evaluates selected available evidence on the 24-h efficacy of medical, laser and surgical therapy options. During the past decade several controlled trials have significantly enhanced our understanding on the 24-h efficacy of all glaucoma therapy options. Nevertheless, more long-term evidence is needed to better evaluate the 24-h efficacy of glaucoma therapy and the precise impact of IOP characteristics on glaucomatous progression and visual prognosis.

Applications of novel effects derived from Si ingot growth inside Si melt without contact with crucible wall using noncontact crucible method to high-efficiency solar cells

NASA Astrophysics Data System (ADS)

Nakajima, Kazuo; Ono, Satoshi; Kaneko, Yuzuru; Murai, Ryota; Shirasawa, Katsuhiko; Fukuda, Tetsuo; Takato, Hidetaka; Jensen, Mallory A.; Youssef, Amanda; Looney, Erin E.; Buonassisi, Tonio; Martel, Benoit; Dubois, Sèbastien; Jouini, Anis

2017-06-01

The noncontact crucible (NOC) method was proposed for obtaining Si single bulk crystals with a large diameter and volume using a cast furnace and solar cells with high conversion efficiency and yield. This method has several novel characteristics that originate from its key feature that ingots can be grown inside a Si melt without contact with a crucible wall. Si ingots for solar cells were grown by utilizing the merits resulting from these characteristics. Single ingots with high quality were grown by the NOC method after furnace cleaning, and the minority carrier lifetime was measured to investigate reduction of the number of impurities. A p-type ingot with a convex growth interface in the growth direction was also grown after furnace cleaning. For p-type solar cells prepared using wafers cut from the ingot, the highest and average conversion efficiencies were 19.14% and 19.0%, respectively, which were obtained using the same solar cell structure and process as those employed to obtain a conversion efficiency of 19.1% for a p-type Czochralski (CZ) wafer. Using the cast furnace, solar cells with a conversion efficiency and yield as high as those of CZ solar cells were obtained by the NOC method.

Effectiveness of the Picture Exchange Communication System (PECS) on communication and speech for children with autism spectrum disorders: a meta-analysis.

PubMed

Flippin, Michelle; Reszka, Stephanie; Watson, Linda R

2010-05-01

The Picture Exchange Communication System (PECS) is a popular communication-training program for young children with autism spectrum disorders (ASD). This meta-analysis reviews the current empirical evidence for PECS in affecting communication and speech outcomes for children with ASD. A systematic review of the literature on PECS written between 1994 and June 2009 was conducted. Quality of scientific rigor was assessed and used as an inclusion criterion in computation of effect sizes. Effect sizes were aggregated separately for single-subject and group studies for communication and speech outcomes. Eight single-subject experiments (18 participants) and 3 group studies (95 PECS participants, 65 in other intervention/control) were included. Results indicated that PECS is a promising but not yet established evidence-based intervention for facilitating communication in children with ASD ages 1-11 years. Small to moderate gains in communication were demonstrated following training. Gains in speech were small to negative. This meta-analysis synthesizes gains in communication and relative lack of gains made in speech across the PECS literature for children with ASD. Concerns about maintenance and generalization are identified. Emerging evidence of potential preintervention child characteristics is discussed. Phase IV was identified as a possibly influential program characteristic for speech outcomes.

Design and numerical analysis of highly sensitive Au-MoS2-graphene based hybrid surface plasmon resonance biosensor

NASA Astrophysics Data System (ADS)

Rahman, M. Saifur; Anower, Md. Shamim; Hasan, Md. Rabiul; Hossain, Md. Biplob; Haque, Md. Ismail

2017-08-01

We demonstrate a highly sensitive Au-MoS2-Graphene based hybrid surface plasmon resonance (SPR) biosensor for the detection of DNA hybridization. The performance parameters of the proposed sensor are investigated in terms of sensitivity, detection accuracy and quality factor at operating wavelength of 633 nm. We observed in the numerical study that sensitivity can be greatly increased by adding MoS2 layer in the middle of a Graphene-on-Au layer. It is shown that by using single layer of MoS2 in between gold and graphene layer, the proposed biosensor exhibits simultaneously high sensitivity of 87.8 deg/RIU, high detection accuracy of 1.28 and quality factor of 17.56 with gold layer thickness of 50 nm. This increased performance is due to the absorption ability and optical characteristics of graphene biomolecules and high fluorescence quenching ability of MoS2. On the basis of changing in SPR angle and minimum reflectance, the proposed sensor can sense nucleotides bonding happened between double-stranded DNA (dsDNA) helix structures. Therefore, this sensor can successfully detect the hybridization of target DNAs to the probe DNAs pre-immobilized on the Au-MoS2-Graphene hybrid with capability of distinguishing single-base mismatch.

Single-case synthesis tools I: Comparing tools to evaluate SCD quality and rigor.

PubMed

Zimmerman, Kathleen N; Ledford, Jennifer R; Severini, Katherine E; Pustejovsky, James E; Barton, Erin E; Lloyd, Blair P

2018-03-03

Tools for evaluating the quality and rigor of single case research designs (SCD) are often used when conducting SCD syntheses. Preferred components include evaluations of design features related to the internal validity of SCD to obtain quality and/or rigor ratings. Three tools for evaluating the quality and rigor of SCD (Council for Exceptional Children, What Works Clearinghouse, and Single-Case Analysis and Design Framework) were compared to determine if conclusions regarding the effectiveness of antecedent sensory-based interventions for young children changed based on choice of quality evaluation tool. Evaluation of SCD quality differed across tools, suggesting selection of quality evaluation tools impacts evaluation findings. Suggestions for selecting an appropriate quality and rigor assessment tool are provided and across-tool conclusions are drawn regarding the quality and rigor of studies. Finally, authors provide guidance for using quality evaluations in conjunction with outcome analyses when conducting syntheses of interventions evaluated in the context of SCD. Copyright © 2018 Elsevier Ltd. All rights reserved.

What makes migrant live-in home care workers in elder care be satisfied with their job?

PubMed

Iecovich, Esther

2011-10-01

The study aims to examine job satisfaction of migrant live-in home care workers who provide care to frail older adults and to examine the extent to which quality of relationships between the care provider and care recipient and workplace characteristics is associated with job satisfaction.  A convenience sample that included 335 dyads of Philippine workers and their frail care recipients were recruited through 2 national home care agencies and snowballing. Multiple regression analyses examined the extent to which workplace characteristics, quality of relationships, care recipient characteristics, and care worker characteristics explain job satisfaction. Scores for job satisfaction, quality of relationships, and workplace characteristics were strongly positive. Overall and intrinsic job satisfactions were explained by workers' qualifications, workplace characteristics, and quality of relationships from the perspective of care recipients, whereas satisfaction with benefits was affected by workplace characteristics and quality of relationships from the perspective of the care workers. Findings suggest that workers who were better qualified in terms of more years of formal education and more years as care workers and who reported improved workplace characteristics, in particular more job decision authority and variety, reported increased job satisfaction. Therefore, enabling migrant live-in care workers more job decision authority and variety may increase their job satisfaction. More research is needed to deepen our understanding of additional job-related characteristics that explain job satisfaction among this group of care workers.

A Hospital-Specific Template for Benchmarking its Cost and Quality

PubMed Central

Silber, Jeffrey H; Rosenbaum, Paul R; Ross, Richard N; Ludwig, Justin M; Wang, Wei; Niknam, Bijan A; Saynisch, Philip A; Even-Shoshan, Orit; Kelz, Rachel R; Fleisher, Lee A

2014-01-01

Objective Develop an improved method for auditing hospital cost and quality tailored to a specific hospital’s patient population. Data Sources/Setting Medicare claims in general, gynecologic and urologic surgery, and orthopedics from Illinois, New York, and Texas between 2004 and 2006. Study Design A template of 300 representative patients from a single index hospital was constructed and used to match 300 patients at 43 hospitals that had a minimum of 500 patients over a 3-year study period. Data Collection/Extraction Methods From each of 43 hospitals we chose 300 patients most resembling the template using multivariate matching. Principal Findings We found close matches on procedures and patient characteristics, far more balanced than would be expected in a randomized trial. There were little to no differences between the index hospital’s template and the 43 hospitals on most patient characteristics yet large and significant differences in mortality, failure-to-rescue, and cost. Conclusion Matching can produce fair, directly standardized audits. From the perspective of the index hospital, “hospital-specific” template matching provides the fairness of direct standardization with the specific institutional relevance of indirect standardization. Using this approach, hospitals will be better able to examine their performance, and better determine why they are achieving the results they observe. PMID:25201167

Covariance of engineering management characteristics with engineering employee performance

NASA Astrophysics Data System (ADS)

Hesketh, Andrew Arthur

1998-12-01

As business in the 1990's grapples with the impact of continuous improvement and quality to meet market demands, there is an increased need to improve the leadership capabilities of our managers. Engineers have indicated desire for certain managerial characteristics in their leadership but there have been no studies completed that approached the problem of determining what managerial characteristics were best at improving employee performance. This study addressed the idea of identifying certain managerial characteristics that enhance employee performance. In the early 1990's, McDonnell Douglas Aerospace in St. Louis used a forced distribution system and allocated 35% of its employees into a "exceeds expectations" category and 60% into a "meets expectations" category. A twenty-question 5 point Likert scale survey on managerial capabilities was administered to a sample engineering population that also obtained their "expectations" category. A single factor ANOVA on the survey results determined a statistical difference between the "exceeds" and "meets" employees with four of the managerial capability questions. The "exceeds expectations" employee indicated that supervision did a better job of supporting subordinate development, clearly communicating performance expectations, and providing timely performance feedback when compared to the "meets expectations" employee. The "meets expectations" employee felt that their opinions, when different from their supervisor's, were more often ignored when compared to the "exceeds expectations" employee. These four questions relate to two specific managerial characteristics, "gaining (informal) authority and support" or "control" characteristic and "providing assistance and guidance" or "command" characteristic, that can be emphasized in managerial training programs.

APOLLO: a quality assessment service for single and multiple protein models.

PubMed

Wang, Zheng; Eickholt, Jesse; Cheng, Jianlin

2011-06-15

We built a web server named APOLLO, which can evaluate the absolute global and local qualities of a single protein model using machine learning methods or the global and local qualities of a pool of models using a pair-wise comparison approach. Based on our evaluations on 107 CASP9 (Critical Assessment of Techniques for Protein Structure Prediction) targets, the predicted quality scores generated from our machine learning and pair-wise methods have an average per-target correlation of 0.671 and 0.917, respectively, with the true model quality scores. Based on our test on 92 CASP9 targets, our predicted absolute local qualities have an average difference of 2.60 Å with the actual distances to native structure. http://sysbio.rnet.missouri.edu/apollo/. Single and pair-wise global quality assessment software is also available at the site.

Generating high-quality single droplets for optical particle characterization with an easy setup

NASA Astrophysics Data System (ADS)

Xu, Jie; Ge, Baozhen; Meng, Rui

2018-06-01

The high-performance and micro-sized single droplet is significant for optical particle characterization. We develop a single-droplet generator (SDG) based on a piezoelectric inkjet technique with advantages of low cost and easy setup. By optimizing the pulse parameters, we achieve various size single droplets. Further investigations reveal that SDG generates single droplets of high quality, demonstrating good sphericity, monodispersity and a stable length of several millimeters.

Depression and quality of life for women in single-parent and nuclear families.

PubMed

Landero Hernández, René; Estrada Aranda, Benito; González Ramírez, Mónica Teresa

2009-05-01

This is a cross-sectional study which objectives are 1) to determine the predictors for perceived quality of life and 2) to analyze the differences between women from single-parent families and bi-parent families, about their quality of life, depression and familiar income. We worked with a non-probabilistic sample of 140 women from Monterrey, N.L, Mexico, 107 are from bi-parent families and 33 from single parent families. Some of the results show that women from single-parent families have lower quality of life (Z = -2.224, p = .026), lower income (Z = -2.727, p = .006) and greater depression (Z = -6.143, p = .001) than women from bi-parental families. The perceived quality of life's predictors, using a multiple regression model (n = 140) were depression, income and number of children, those variables explaining 25.4% of variance.

Correlates of sleep quality in midlife and beyond: a machine learning analysis.

PubMed

Kaplan, Katherine A; Hardas, Prajesh P; Redline, Susan; Zeitzer, Jamie M

2017-06-01

In older adults, traditional metrics derived from polysomnography (PSG) are not well correlated with subjective sleep quality. Little is known about whether the association between PSG and subjective sleep quality changes with age, or whether quantitative electroencephalography (qEEG) is associated with sleep quality. Therefore, we examined the relationship between subjective sleep quality and objective sleep characteristics (standard PSG and qEEG) across middle to older adulthood. Using cross-sectional analyses of 3173 community-dwelling men and women aged between 39 and 90 participating in the Sleep Heart Health Study, we examined the relationship between a morning rating of the prior night's sleep quality (sleep depth and restfulness) and polysomnographic, and qEEG descriptors of that single night of sleep, along with clinical and demographic measures. Multivariable models were constructed using two machine learning methods, namely lasso penalized regressions and random forests. Little variance was explained across models. Greater objective sleep efficiency, reduced wake after sleep onset, and fewer sleep-to-wake stage transitions were each associated with higher sleep quality; qEEG variables contributed little explanatory power. The oldest adults reported the highest sleep quality even as objective sleep deteriorated such that they would rate their sleep better, given the same level of sleep efficiency. Despite this, there were no major differences in the predictors of subjective sleep across the age span. Standard metrics derived from PSG, including qEEG, contribute little to explaining subjective sleep quality in middle-aged to older adults. The objective correlates of subjective sleep quality do not appear to systematically change with age despite a change in the relationship between subjective sleep quality and objective sleep efficiency. Published by Elsevier B.V.

Determination of Component Contents of Blend Oil Based on Characteristics Peak Value Integration.

PubMed

Xu, Jing; Hou, Pei-guo; Wang, Yu-tian; Pan, Zhao

2016-01-01

Edible blend oil market is confused at present. It has some problems such as confusing concepts, randomly named, shoddy and especially the fuzzy standard of compositions and ratios in blend oil. The national standard fails to come on time after eight years. The basic reason is the lack of qualitative and quantitative detection of vegetable oils in blend oil. Edible blend oil is mixed by different vegetable oils according to a certain proportion. Its nutrition is rich. Blend oil is eaten frequently in daily life. Different vegetable oil contains a certain components. The mixed vegetable oil can make full use of their nutrients and make the nutrients more balanced in blend oil. It is conducive to people's health. It is an effectively way to monitor blend oil market by the accurate determination of single vegetable oil content in blend oil. The types of blend oil are known, so we only need for accurate determination of its content. Three dimensional fluorescence spectra are used for the contents in blend oil. A new method of data processing is proposed with calculation of characteristics peak value integration in chosen characteristic area based on Quasi-Monte Carlo method, combined with Neural network method to solve nonlinear equations to obtain single vegetable oil content in blend oil. Peanut oil, soybean oil and sunflower oil are used as research object to reconcile into edible blend oil, with single oil regarded whole, not considered each oil's components. Recovery rates of 10 configurations of edible harmonic oil is measured to verify the validity of the method of characteristics peak value integration. An effective method is provided to detect components content of complex mixture in high sensitivity. Accuracy of recovery rats is increased, compared the common method of solution of linear equations used to detect components content of mixture. It can be used in the testing of kinds and content of edible vegetable oil in blend oil for the food quality detection, and provide an effective reference for the creation of national standards.

Preschool Center Quality and School Readiness: Quality Effects and Variation by Demographic and Child Characteristics

PubMed Central

Keys, Tran D.; Farkas, George; Burchinal, Margaret R.; Duncan, Greg J.; Vandell, Deborah L.; Li, Weilin; Ruzek, Erik A.; Howes, Carollee

2014-01-01

This article examines associations between observed quality in preschool center classrooms for approximately 6,250 three- to five-year-olds and their school readiness skills at kindergarten entry. Secondary analyses were conducted using data from four large-scale studies to estimate the effects of preschool center quality and interactions between quality and demographic characteristics and child entry skills and behaviors. Findings were summarized across studies using meta-analytic methods. Results indicate small, but statistically significant associations for preschool center quality main effects on language and mathematics outcomes with little evidence of moderation by demographic characteristics or child entry skills and behaviors. Preschool center quality was not reliably related to socioemotional outcomes. The authors discuss possible explanations for the small effect sizes and lack of differential effects. PMID:23331043

Characteristics of Successful Entrepreneurs.

ERIC Educational Resources Information Center

McClelland, David C.

1987-01-01

Comparison of characteristics of 12 average and 12 superior small business people in three developing nations (India, Malawi, and Ecuador) found proactive qualities such as initiative and assertiveness, achievement orientation, and commitment to others characteristic of successful entrepreneurs. Other expected qualities (self-confidence,…

Embodying Meaning: Qualities, Feelings, Selective Attention, and Habits

ERIC Educational Resources Information Center

Andersson, Joacim; Garrison, Jim

2016-01-01

Recently, there has been increasing pedagogical interest in the qualities and characteristics of movement. This article examines these qualities and characteristics in terms of John Dewey's distinction between abstract, linguistic "significant" meanings and concrete, embodied "imminent" meanings. Imminent meanings are comprised…

Inequalities in the psychological well-being of employed, single and partnered mothers: the role of psychosocial work quality and work-family conflict

PubMed Central

2010-01-01

Background A large body of international research reveals that single mothers experience poorer mental health than their partnered counterparts, with socioeconomic disadvantage identified as an important contributory factor in understanding this health disparity. Much less research, however, has focused specifically on the psychological well-being of single mothers who are employed, despite their growing presence in the labor force. Of the research which has considered employment, the focus has been on employment status per se rather than on other important work-related factors which may impact psychological health, such as psychosocial work quality and work-family conflict. The aim of this study was to: (1) compare employed single mothers and employed partnered mothers on measures of psychological distress, psychosocial work quality and work-family conflict; and (2) explore the potential role of work-family conflict and psychosocial work quality as explanations for any observed differences in psychological distress based on partner status. Method Analysis of data obtained from a cross-sectional telephone survey of employed parents in a mid-sized Western Canadian city. Analyses were based on 674 employed mothers (438 partnered and 236 single), who were 25-50 years old, with at least one child in the household. Results Compared to employed single mothers, employed partnered mothers were older, had more education and reported fewer hours of paid work. Single mothers reported higher levels of psychological distress, financial hardship, work-family conflict and poor psychosocial work quality. Statistical adjustment for income adequacy, psychosocial work quality and work-family conflict each independently resulted in single motherhood no longer being associated with psychological distress. Conclusions While single employed mothers did experience higher levels of psychological distress than their partnered counterparts, differences between these groups of women in income adequacy, psychosocial work quality, and work-family conflict were found to explain this relationship. Future research employing a longitudinal design and subject to lower selection biases is required to tease out the interrelationship of these three life strains and to point to the most appropriate economic and social policies to support single mothers in the workforce. PMID:20175914

Influence of rainfall and catchment characteristics on urban stormwater quality.

PubMed

Liu, An; Egodawatta, Prasanna; Guan, Yuntao; Goonetilleke, Ashantha

2013-02-01

The accuracy and reliability of urban stormwater quality modelling outcomes are important for stormwater management decision making. The commonly adopted approach where only a limited number of factors are used to predict urban stormwater quality may not adequately represent the complexity of the quality response to a rainfall event or site-to-site differences to support efficient treatment design. This paper discusses an investigation into the influence of rainfall and catchment characteristics on urban stormwater quality in order to investigate the potential areas for errors in current stormwater quality modelling practices. It was found that the influence of rainfall characteristics on pollutant wash-off is step-wise based on specific thresholds. This means that a modelling approach where the wash-off process is predicted as a continuous function of rainfall intensity and duration is not appropriate. Additionally, other than conventional catchment characteristics, namely, land use and impervious surface fraction, other catchment characteristics such as impervious area layout, urban form and site specific characteristics have an important influence on both, pollutant build-up and wash-off processes. Finally, the use of solids as a surrogate to estimate other pollutant species was found to be inappropriate. Individually considering build-up and wash-off processes for each pollutant species should be the preferred option. Copyright © 2012 Elsevier B.V. All rights reserved.

Evaluating Quality and Adequacy of Gastrointestinal Samples Collected using Reusable or Disposable Forceps.

PubMed

Cartwright, J A; Hill, T L; Smith, S; Shaw, D

2016-07-01

Sample quality of gastrointestinal endoscopic biopsies is of paramount importance for accurate histological diagnosis. Many veterinary practices use reusable forceps as a result of perceived decreased cost. With reusable forceps, it remains unknown whether sample quality declines with repeated use and becomes inferior to single-use forceps and is therefore more or less cost effective than single-use forceps. The study hypothesis was that reusable forceps sample quality would deteriorate after repeated use as compared to single-use forceps. Sixty-five dogs undergoing gastrointestinal endoscopy for diagnostic investigations at the Hospital for Small Animals, Edinburgh University. A prospective, pathologist-blinded study comparing single-use and reusable alligator standard cup biopsy forceps (Olympus 2.0 mm 1550 mm) with 5 randomized reusable forceps. Sample quality (stomach, duodenum, ileum, and colon) was assessed by a single pathologist using the WSAVA guidelines. There was no difference in the adequacy, depth, villi number, or crush artifact in the 4 intestinal areas between forceps type with at least 10, and up to 15, repeated uses of the reusable forceps. This study demonstrates that reusable cup biopsy forceps provide equivalent biopsy quality after repeated uses to single-use forceps and are cost effective at 10-case use. Copyright © 2016 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals, Inc. on behalf of the American College of Veterinary Internal Medicine.

Access to Quality Early Childhood Care and Education. Background Paper for the Quality Child Care Think Tank. Draft.

ERIC Educational Resources Information Center

Brandon, Richard N.; Smith, Diana

This background paper discusses the current system of child care finance in Washington State and analyzes options for improvement. It describes prominent characteristics of the early childhood care and education system, findings relating program quality to staff/child ratios and staff educational levels, characteristics of quality, parent…

National Beef Quality Audit-2011: Harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and byproducts

USDA-ARS?s Scientific Manuscript database

The National Beef Quality Audit-2011(NBQA-2011) was conducted to assess targeted characteristics on the harvest floor that affect the quality and value of cattle, carcasses, and byproducts. Survey teams evaluated approximately 18,000 cattle/carcasses between May and November 2011 in 8 beef processin...

Soft wheat quality characteristics required for making baking powder biscuits

USDA-ARS?s Scientific Manuscript database

Fifteen soft wheat varieties were evaluated for their grain, milling, flour and dough mixing characteristics, as well as their solvent retention capacities (SRCs), pasting properties and suitability for making baking powder biscuits, to identify wheat quality characteristics required for making bisc...

Requirements for satisfactory flying qualities of airplanes

NASA Technical Reports Server (NTRS)

Gilruth, R R

1943-01-01

Report discusses the results of an analysis of available data to determine what measured characteristics are significant in defining satisfactory flying qualities, what characteristics are reasonable to require of an airplane, and what influence the various design features have on the observed flying qualities.

The Quanta Image Sensor: Every Photon Counts

PubMed Central

Fossum, Eric R.; Ma, Jiaju; Masoodian, Saleh; Anzagira, Leo; Zizza, Rachel

2016-01-01

The Quanta Image Sensor (QIS) was conceived when contemplating shrinking pixel sizes and storage capacities, and the steady increase in digital processing power. In the single-bit QIS, the output of each field is a binary bit plane, where each bit represents the presence or absence of at least one photoelectron in a photodetector. A series of bit planes is generated through high-speed readout, and a kernel or “cubicle” of bits (x, y, t) is used to create a single output image pixel. The size of the cubicle can be adjusted post-acquisition to optimize image quality. The specialized sub-diffraction-limit photodetectors in the QIS are referred to as “jots” and a QIS may have a gigajot or more, read out at 1000 fps, for a data rate exceeding 1 Tb/s. Basically, we are trying to count photons as they arrive at the sensor. This paper reviews the QIS concept and its imaging characteristics. Recent progress towards realizing the QIS for commercial and scientific purposes is discussed. This includes implementation of a pump-gate jot device in a 65 nm CIS BSI process yielding read noise as low as 0.22 e− r.m.s. and conversion gain as high as 420 µV/e−, power efficient readout electronics, currently as low as 0.4 pJ/b in the same process, creating high dynamic range images from jot data, and understanding the imaging characteristics of single-bit and multi-bit QIS devices. The QIS represents a possible major paradigm shift in image capture. PMID:27517926

A Framework for Evaluating the Software Product Quality of Pregnancy Monitoring Mobile Personal Health Records.

PubMed

Idri, Ali; Bachiri, Mariam; Fernández-Alemán, José Luis

2016-03-01

Stakeholders' needs and expectations are identified by means of software quality requirements, which have an impact on software product quality. In this paper, we present a set of requirements for mobile personal health records (mPHRs) for pregnancy monitoring, which have been extracted from literature and existing mobile apps on the market. We also use the ISO/IEC 25030 standard to suggest the requirements that should be considered during the quality evaluation of these mPHRs. We then go on to design a checklist in which we contrast the mPHRs for pregnancy monitoring requirements with software product quality characteristics and sub-characteristics in order to calculate the impact of these requirements on software product quality, using the ISO/IEC 25010 software product quality standard. The results obtained show that the requirements related to the user's actions and the app's features have the most impact on the external sub-characteristics of the software product quality model. The only sub-characteristic affected by all the requirements is Appropriateness of Functional suitability. The characteristic Operability is affected by 95% of the requirements while the lowest degrees of impact were identified for Compatibility (15%) and Transferability (6%). Lastly, the degrees of the impact of the mPHRs for pregnancy monitoring requirements are discussed in order to provide appropriate recommendations for the developers and stakeholders of mPHRs for pregnancy monitoring.

Meta-Review of the Quantity and Quality of Evidence for Knee Arthroplasty Devices.

PubMed

Gagliardi, Anna R; Ducey, Ariel; Lehoux, Pascale; Ross, Sue; Trbovich, Patricia; Easty, Anthony; Bell, Chaim; Takata, Julie; Pabinger, Christof; Urbach, David R

2016-01-01

Some cardiovascular devices are licensed based on limited evidence, potentially exposing patients to devices that are not safe or effective. Research is needed to ascertain if the same is true of other types of medical devices. Knee arthroplasty is a widely-used surgical procedure yet implant failures are not uncommon. The purpose of this study was to characterize available evidence on the safety and effectiveness of knee implants. A review of primary studies included in health technology assessments (HTA) on total (TKA) and unicompartmental knee arthroplasty (UKA) was conducted. MEDLINE, EMBASE, CINAHL, Cochrane Library and Biotechnology & BioEngineering Abstracts were searched from 2005 to 2014, plus journal tables of contents and 32 HTA web sites. Patients were aged 18 and older who underwent primary TKA or UKA assessed in cohort or randomized controlled studies. Summary statistics were used to report study characteristics. A total of 265 eligible primary studies published between 1986 and 2014 involving 59,217 patients were identified in 10 HTAs (2 low, 7 moderate, 1 high risk of bias). Most evaluated TKA (198, 74.5%). The quality of evidence in primary studies was limited. Most studies were industry-funded (23.8%) or offered no declaration of funding or conflict of interest (44.9%); based on uncontrolled single cohorts (58.5%), enrolled fewer than 100 patients (66.4%), and followed patients for 2 years or less (UKA: single cohort 29.8%, comparative cohort 16.7%, randomized trial 25.0%; TKA: single cohort 25.0%, comparative cohort 31.4%, randomized trial 48.6%). Furthermore, most devices were evaluated in only one study (55.3% TKA implants, 61.1% UKA implants). Patients, physicians, hospitals and payers rely on poor-quality evidence to support decisions about knee implants. Further research is needed to explore how decisions about the use of devices are currently made, and how the evidence base for device safety and effectiveness can be strengthened.

The Effect of Traditional Cupping on Pain and Mechanical Thresholds in Patients with Chronic Nonspecific Neck Pain: A Randomised Controlled Pilot Study

PubMed Central

Lauche, Romy; Cramer, Holger; Hohmann, Claudia; Choi, Kyung-Eun; Rampp, Thomas; Saha, Felix Joyonto; Musial, Frauke; Langhorst, Jost; Dobos, Gustav

2012-01-01

Introduction. Cupping has been used since antiquity in the treatment of pain conditions. In this pilot study, we investigated the effect of traditional cupping therapy on chronic nonspecific neck pain (CNP) and mechanical sensory thresholds. Methods. Fifty CNP patients were randomly assigned to treatment (TG, n = 25) or waiting list control group (WL, n = 25). TG received a single cupping treatment. Pain at rest (PR), pain related to movement (PM), quality of life (SF-36), Neck Disability Index (NDI), mechanical detection (MDT), vibration detection (MDT), and pressure pain thresholds (PPT) were measured before and three days after a single cupping treatment. Patients also kept a pain and medication diary (PaDi, MeDi) during the study. Results. Baseline characteristics were similar in the two groups. After cupping TG reported significantly less pain (PR: −17.9 mm VAS, 95%CI −29.2 to −6.6; PM: −19.7, 95%CI −32.2 to −7.2; PaDi: −1.5 points on NRS, 95%CI −2.5 to −0.4; all P < 0.05) and higher quality of life than WL (SF-36, Physical Functioning: 7.5, 95%CI 1.4 to 13.5; Bodily Pain: 14.9, 95%CI 4.4 to 25.4; Physical Component Score: 5.0, 95%CI 1.4 to 8.5; all P < 0.05). No significant effect was found for NDI, MDT, or VDT, but TG showed significantly higher PPT at pain-areas than WL (in lg(kPa); pain-maximum: 0.088, 95%CI 0.029 to 0.148, pain-adjacent: 0.118, 95%CI 0.038 to 0.199; both P < 0.01). Conclusion. A single application of traditional cupping might be an effective treatment for improving pain, quality of life, and hyperalgesia in CNP. PMID:22203873

Community-level characteristics associated with variation in rates of homelessness among families and single adults.

PubMed

Fargo, Jamison D; Munley, Ellen A; Byrne, Thomas H; Montgomery, Ann Elizabeth; Culhane, Dennis P

2013-12-01

We modeled rates of family and single-adult homelessness in the United States in metropolitan and nonmetropolitan regions and as a function of community-level demographic, behavioral, health, economic, and safety net characteristics. We entered community-level characteristics and US Department of Housing and Urban Development point-in-time counts for a single night in January 2009 into separate mixed-effects statistical analyses that modeled homelessness rates for 4 subpopulations: families and single adults in metropolitan and nonmetropolitan regions. Community-level factors accounted for 25% to 50% of the variance in homelessness rates across models. In metropolitan regions, alcohol consumption, social support, and several economic indicators were uniquely associated with family homelessness, and drug use and homicide were uniquely associated with single-adult homelessness. In nonmetropolitan regions, life expectancy, religious adherence, unemployment, and rent burden were uniquely associated with family homelessness, and health care access, crime, several economic indicators, and receipt of Supplemental Security Income were uniquely associated with single-adult homelessness. Considering homeless families and single adults separately enabled more precise modeling of associations between homelessness rates and community-level characteristics, indicating targets for interventions to reduce homelessness among these subpopulations.

Community-Level Characteristics Associated With Variation in Rates of Homelessness Among Families and Single Adults

PubMed Central

Fargo, Jamison D.; Munley, Ellen A.; Byrne, Thomas H.; Montgomery, Ann Elizabeth; Culhane, Dennis P.

2013-01-01

Objectives. We modeled rates of family and single-adult homelessness in the United States in metropolitan and nonmetropolitan regions and as a function of community-level demographic, behavioral, health, economic, and safety net characteristics. Methods. We entered community-level characteristics and US Department of Housing and Urban Development point-in-time counts for a single night in January 2009 into separate mixed-effects statistical analyses that modeled homelessness rates for 4 subpopulations: families and single adults in metropolitan and nonmetropolitan regions. Results. Community-level factors accounted for 25% to 50% of the variance in homelessness rates across models. In metropolitan regions, alcohol consumption, social support, and several economic indicators were uniquely associated with family homelessness, and drug use and homicide were uniquely associated with single-adult homelessness. In nonmetropolitan regions, life expectancy, religious adherence, unemployment, and rent burden were uniquely associated with family homelessness, and health care access, crime, several economic indicators, and receipt of Supplemental Security Income were uniquely associated with single-adult homelessness. Conclusions. Considering homeless families and single adults separately enabled more precise modeling of associations between homelessness rates and community-level characteristics, indicating targets for interventions to reduce homelessness among these subpopulations. PMID:24148057

Acoustic emission from single point machining: Part 2, Signal changes with tool wear

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heiple, C.R.; Carpenter, S.H.; Armentrout, D.L.

1989-01-01

Changes in acoustic emission signal characteristics with tool wear were monitored during single point machining of 4340 steel and Ti-6Al-4V heat treated to several strength levels, 606l-T6 aluminum, 304 stainless steel, 17-4PH stainless steel, 410 stainless steel, lead, and teflon. No signal characteristic changed in the same way with tool wear for all materials tested. A single change in a particular AE signal characteristic with tool wear valid for all materials probably does not exist. Nevertheless, changes in various signal characteristic with wear for a given material may be sufficient to be used to monitor tool wear.

Caregiver staffing in nursing homes and their influence on quality of care: using dynamic panel estimation methods.

PubMed

Castle, Nicholas G; Anderson, Ruth A

2011-06-01

There is inconclusive evidence that nursing home caregiver staffing characteristics influence quality of care. In this research, the relationship of caregiver staffing levels, turnover, agency use, and professional staff mix with quality is further examined using a longitudinal analysis to overcome weaknesses of earlier research. The data used came from a survey of nursing home administrators, Nursing Home Compare, the Online Survey Certification and Reporting data, and the Area Resource File. The staffing variables of Registered Nurses, Licensed Practical Nurses, and Nurse Aides were measured quarterly from 2003 through 2007, and came from 2839 facilities. Generalized method of moments estimation was used to examine the effects of changes in staffing characteristics on changes in 4 quality measures (physical restraint use, catheter use, pain management, and pressure sores). Regression analyses show a robust association between the staffing characteristic variables and quality indicators. A change to more favorable staffing is generally associated with a change to better quality. With longitudinal information and quarterly staffing information, we are able to show that for many nursing homes improving staffing characteristics will improve quality of care.

Quality Control Review of the PricewaterhouseCoopers LLP FY 2014 Single Audit of Carnegie Mellon University

DTIC Science & Technology

2015-12-17

No. DODIG-2016-034 D E C E M B E R 1 7 , 2 0 1 5 Quality Control Review of the PricewaterhouseCoopers LLP FY 2014 Single Audit of Carnegie ...ALEXANDRIA, VIRGINIA 22350-1500 December 17, 2015 Audit Partner PricewaterhouseCoopers LLP Board of Trustees Carnegie Mellon University Director, Sponsored...Projects Accounting Carnegie Mellon University SUBJECT: Quality Control Review of the PricewaterhouseCoopers LLP FY 2014 Single Audit of Carnegie

Growth of high quality bulk size single crystals of inverted solubility lithium sulphate monohydrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silambarasan, A.; Rajesh, P., E-mail: rajeshp@ssn.edu.in; Ramasamy, P.

2015-06-24

The paper summarizes the processes of growing large lithium sulfate monohydrate (LSMH) single crystals. We have established a procedure to grow high quality bulk size single crystals of inverted solubility LSMH by a newly developed unidirectional crystallization technique called the Sankeranarayenan - Ramasamy (SR) method. The convective flow of crystal growth processes from solution and the conditions of growing crystals of various aspects were discussed. Good quality LSMH single crystal is grown of the size 20 mmX80 mm without cracks, localized-defects and inclusions. The as-grown crystals are suitable for piezoelectric and nonlinear optical applications.

Characteristics That Differentiate Telecommuting from Non-Telecommuting Professionals in the Quality Assurance and Quality Control Arena

ERIC Educational Resources Information Center

Claybon, Tina S.

2013-01-01

The interest in working from home in contrast to going to an office continues to be a growing phenomenon. This research examined personal characteristics of telecommuters and non-telecommuters including age, gender, years of working for the organization, and job satisfaction in the quality control and quality assurance arena. This study aimed to…

Correlates of quality educational programs.

PubMed

Chester, Deborah R; Tracy, Jessamyn A; Earp, Emily; Chauhan, Reetu

2002-06-01

Preliminary evaluation findings are presented that explore relationships between educational program quality and program characteristics such as program type, security level, aftercare, teacher certification, facility size, and private versus public provider. Several program characteristics are found to be related to measurements of educational program quality. Among the major quality characteristics are proportion of program teachers that are professionally certified, smaller sized facilities versus larger facilities, level of aftercare services, and provider sources, with private for-profit providers being the lowest performing and public providers being the highest performing. The article closes with description of the Juvenile Justice Educational Enhancement Program's continuing evaluation of correlates to educational program quality through the continued development of a comprehensive database.

Attenuation characteristics in eastern Himalaya and southern Tibetan Plateau: An understanding of the physical state of the medium

NASA Astrophysics Data System (ADS)

Singh, Sagar; Singh, Chandrani; Biswas, Rahul; Mukhopadhyay, Sagarika; Sahu, Himanshu

2016-08-01

Attenuation characteristics of the crust in the eastern Himalaya and the southern Tibetan Plateau are investigated using high quality data recorded by Himalayan Nepal Tibet Seismic Experiment (HIMNT) during 2001-2003. The present study aims to provide an attenuation model that can address the physical mechanism governing the attenuation characteristics in the underlying medium. We have studied the Coda wave attenuation (Qc) in the single isotropic scattering model hypothesis, S wave attenuation (Qs) by using the coda normalization method and intrinsic (Qi-1) and scattering (Qsc-1) quality factors by the multiple Lapse Time Window Analysis (MLTWA) method under the assumption of multiple isotropic scattering in a 3-D half space within the frequency range 2-12 Hz. All the values of Q exhibit frequency dependent nature for a seismically active area. At all the frequencies intrinsic absorption is predominant compared to scattering attenuation and seismic albedo (B0) are found to be lower than 0.5. The observed discrepancies between the observed and theoretical models can be corroborated by the depth-dependent velocity and attenuation structure as well as the assumption of a uniform distribution of scatterers. Our results correlate well with the existing geo-tectonic model of the area, which may suggest the possible existence of trapped fluids in the crust or its thermal nature. Surprisingly the underlying cause of high attenuation in the crust of eastern Himalaya and southern Tibet makes this region distinct from its adjacent western Himalayan segment. The results are comparable with the other regions reported globally.

Predictors of supportive coparenting after relationship dissolution among at-risk parents.

PubMed

Kamp Dush, Claire M; Kotila, Letitia E; Schoppe-Sullivan, Sarah J

2011-06-01

Supportive coparenting after relationship dissolution is associated with increased father involvement which can buffer against the negative effects of parental relationship dissolution. Low-income, at-risk families are much more likely to experience relationship dissolutions; hence, supportive coparenting after dissolution is particularly important in these families. We examined whether relationship (commitment and quality) and child (difficult temperament and gender) characteristics predicted initial levels of, and change in, supportive coparenting after relationship dissolution in the Fragile Families and Child Wellbeing Study (N = 1,603). We used structural equation modeling of latent growth curves to examine four time points collected at the focal child's birth and first, third, and fifth birthdays. Ninety-percent of the mothers had nonmarital births, and about three-quarters had a high school diploma or less education. Overall, supportive coparenting decreased over time. Mothers in more committed relationships prior to the dissolution initially had significantly lower supportive coparenting. But over time, mothers who had been in more committed relationships increased in supportive coparenting. Mothers who had been in higher quality relationships prior to dissolution initially reported more supportive coparenting. At each time point, if a mother was romantically involved with a new partner, she reported significantly lower supportive coparenting compared to mothers who were single. With regard to child characteristics, mothers who reported their child as more difficult had significantly lower initial supportive coparenting. Similar results for fathers are discussed. Overall, the relationship characteristics of parents were important predictors of supportive coparenting both initially and over time. 2011 APA, all rights reserved

Socio-demographic characteristics and psychosocial consequences of sickle cell disease: the case of patients in a public hospital in Ghana.

PubMed

Adzika, Vincent A; Glozah, Franklin N; Ayim-Aboagye, Desmond; Ahorlu, Collins S K

2017-01-31

Sickle cell disease (SCD) is of major public health concern globally, with majority of patients living in Africa. Despite its relevance, there is a dearth of research to determine the socio-demographic distribution and psychosocial impact of SCD in Ghana. The objective of this study was to examine the socio-demographic distribution and psychosocial consequences of SCD among patients in Ghana and to assess their quality of life and coping mechanisms. A cross-sectional research design was used that involved the completion of questionnaires on socio-demographic characteristics, quality of life, coping mechanisms, anxiety and depression. Participants were 387 male and female patients attending a sickle cell clinic in a public hospital. Results showed that majority of the patients were single, female, less than 39 years old and had attained secondary school level of education or less. Also, patients were more satisfied by the presence of love, friends and relatives as well as home, community and neighbourhood environment. While pains of varied nature and severity were the major reasons for attending hospital in SCD condition, going to the hospital as well as having faith in God was the most frequently reported mechanisms for coping with an unbearable SCD attacks. Results of multiple regression analysis showed that some socio-demographic and quality of life indicators had strong associations with anxiety and/or depression. It is recommended that a holistic intervention strategy incorporating psychosocial dimensions should be considered in the treatment and management of SCD.

Building characteristics, indoor air quality and recurrent wheezing in very young children (BAMSE).

PubMed

Emenius, G; Svartengren, M; Korsgaard, J; Nordvall, L; Pershagen, G; Wickman, M

2004-02-01

This study was conducted to examine the impact of building characteristics and indoor air quality on recurrent wheezing in infants. We followed a birth cohort (BAMSE) comprising 4089 children, born in predefined areas of Stockholm, during their first 2 years of life. Information on exposures was obtained from parental questionnaires when the children were 2 months and on symptoms and diseases when the children were 1 and 2 years old. Children with recurrent wheezing, and two age-matched controls per case, were identified and enrolled in a nested case-control study. The homes were investigated and ventilation rate, humidity, temperature and NO2 measured. We found that living in an apartment erected after 1939, or in a private home with crawl space/concrete slab foundation were associated with an increased risk of recurrent wheezing, odds ratio (OR) 2.5 (1.3-4.8) and 2.5 (1.1-5.4), respectively. The same was true for living in homes with absolute indoor humidity >5.8 g/kg, OR 1.7 (1.0-2.9) and in homes where windowpane condensation was consistently reported over several years, OR 2.2 (1.1-4.5). However, air change rate and type of ventilation system did not seem to affect the risk. In conclusion, relatively new apartment buildings, single-family homes with crawl space/concrete slab foundation, elevated indoor humidity, and reported wintertime windowpane condensation were associated with recurrent wheezing in infants. Thus, improvements of the building quality may have potential to prevent infant wheezing.

Flight-testing and frequency-domain analysis for rotorcraft handling qualities

NASA Technical Reports Server (NTRS)

Ham, Johnnie A.; Gardner, Charles K.; Tischler, Mark B.

1995-01-01

A demonstration of frequency-domain flight-testing techniques and analysis was performed on a U.S. Army OH-58D helicopter in support of the OH-58D Airworthiness and Flight Characteristics Evaluation and of the Army's development and ongoing review of Aeronautical Design Standard 33C, Handling Qualities Requirements for Military Rotorcraft. Hover and forward flight (60 kn) tests were conducted in 1 flight hour by Army experimental test pilots. Further processing of the hover data generated a complete database of velocity, angular-rate, and acceleration-frequency responses to control inputs. A joint effort was then undertaken by the Airworthiness Qualification Test Dirtectorate and the U.S. Army Aeroflightdynamics Directorate to derive handling-quality information from the frequency-domain database using a variety of approaches. This report documents numerous results that have been obtained from the simple frequency-domain tests; in many areas, these results provide more insight into the aircraft dynmamics that affect handling qualities than do traditional flight tests. The handling-quality results include ADS-33C bandwidth and phase-delay calculations, vibration spectral determinations, transfer-function models to examine single-axis results, and a six-degree-of-freedom fully coupled state-space model. The ability of this model to accurately predict responses was verified using data from pulse inputs. This report also documents the frequency-sweep flight-test technique and data analysis used to support the tests.

The quality estimation of exterior wall’s and window filling’s construction design

NASA Astrophysics Data System (ADS)

Saltykov, Ivan; Bovsunovskaya, Maria

2017-10-01

The article reveals the term of “artificial envelope” in dwelling building. Authors offer a complex multifactorial approach to the design quality estimation of external fencing structures, which is based on various parameters impact. These referred parameters are: functional, exploitation, cost, and also, the environmental index is among them. The quality design index Qк is inputting for the complex characteristic of observed above parameters. The mathematical relation of this index from these parameters is the target function for the quality design estimation. For instance, the article shows the search of optimal variant for wall and window designs in small, middle and large square dwelling premises of economic class buildings. The graphs of target function single parameters are expressed for the three types of residual chamber’s dimensions. As a result of the showing example, there is a choice of window opening’s dimensions, which make the wall’s and window’s constructions properly correspondent to the producible complex requirements. The authors reveal the comparison of recommended window filling’s square in accordance with the building standards, and the square, due to the finding of the optimal variant of the design quality index. The multifactorial approach for optimal design searching, which is mentioned in this article, can be used in consideration of various construction elements of dwelling buildings in accounting of suitable climate, social and economic construction area features.

Family relations and health over the life course. A Lebanese perspective.

PubMed

Ajrouch, Kristine J; Abdulrahim, Sawsan; Antonucci, Toni C

2015-01-01

The link between family relations and well-being in old age has received ample attention in the international literature, but remains least examined in the Arab region where cultural ideals assume positive intergenerational relations within families as the norm. In this paper, we employ survey data collected in Greater Beirut in 2009 to explore associations between family relations and health. over the life course. We tested (1) the extent to which age and social relation characteristics predict health; and (2) whether the association between age and health is stronger for those who report: smaller social networks and poorer relationship quality. We employed self-rated health and self-reported chronic illness as the health outcome measures and:social network size, positive quality and negative quality with family members as the social relations measures. Our findings suggest that social relations are differentially important depending on the health status indicator examined. The single dimension that influenced both self-rated health and the probability of reporting a chronic illness was positive relationship quality with spouse. Further, social relations, particularly having a negative relationship quality with spouse and adult child, exert stronger effects on both self-rated health and chronic illness for older compared to younger adults. The findings of the present study are important for clinical practitioners who often consider the role and importance of available social resources as they address the health needs of older adults.

Protein single-model quality assessment by feature-based probability density functions.

PubMed

Cao, Renzhi; Cheng, Jianlin

2016-04-04

Protein quality assessment (QA) has played an important role in protein structure prediction. We developed a novel single-model quality assessment method-Qprob. Qprob calculates the absolute error for each protein feature value against the true quality scores (i.e. GDT-TS scores) of protein structural models, and uses them to estimate its probability density distribution for quality assessment. Qprob has been blindly tested on the 11th Critical Assessment of Techniques for Protein Structure Prediction (CASP11) as MULTICOM-NOVEL server. The official CASP result shows that Qprob ranks as one of the top single-model QA methods. In addition, Qprob makes contributions to our protein tertiary structure predictor MULTICOM, which is officially ranked 3rd out of 143 predictors. The good performance shows that Qprob is good at assessing the quality of models of hard targets. These results demonstrate that this new probability density distribution based method is effective for protein single-model quality assessment and is useful for protein structure prediction. The webserver of Qprob is available at: http://calla.rnet.missouri.edu/qprob/. The software is now freely available in the web server of Qprob.

The Effects of Job Characteristics on Marital Quality: Specifying Linking Mechanisms.

ERIC Educational Resources Information Center

Hughes, Diane; And Others

1992-01-01

Evaluated conceptual model hypothesizing that two dimensions of work-family interference, structural role difficulties and negative mood spillover, intervene in direct relationship between discrete characteristics of work and marital quality. Findings from 334 male and female white-collar workers indicated that job characteristics predicted…

Comparison of chain sampling plans with single and double sampling plans

NASA Technical Reports Server (NTRS)

Stephens, K. S.; Dodge, H. F.

1976-01-01

The efficiency of chain sampling is examined through matching of operating characteristics (OC) curves of chain sampling plans (ChSP) with single and double sampling plans. In particular, the operating characteristics of some ChSP-0, 3 and 1, 3 as well as ChSP-0, 4 and 1, 4 are presented, where the number pairs represent the first and the second cumulative acceptance numbers. The fact that the ChSP procedure uses cumulative results from two or more samples and that the parameters can be varied to produce a wide variety of operating characteristics raises the question whether it may be possible for such plans to provide a given protection with less inspection than with single or double sampling plans. The operating ratio values reported illustrate the possibilities of matching single and double sampling plans with ChSP. It is shown that chain sampling plans provide improved efficiency over single and double sampling plans having substantially the same operating characteristics.

Guide to the measurement of tree characteristics important to the quality classification for young hardwood trees

Treesearch

David L. Sonderman

1979-01-01

A procedure is shown for measuring external tree characteristics that are important in determining the current and future quality of young hardwood trees. This guide supplements a precious study which describes the quality classification system for young hardwood trees

Effects of Exercise Interventions on Stereotypic Behaviours in Children with Autism Spectrum Disorder

PubMed Central

Petrus, Christopher; Adamson, Sarah R.; Block, Laurie; Einarson, Sarah J.; Sharifnejad, Maryam

2008-01-01

Purpose: The purpose of this systematic review was to synthesize evidence from studies examining the effect of exercise interventions on stereotypic behaviours in children with autism spectrum disorder (ASD). Methods: Only exercise-related physical therapy (PT) interventions were included. A multifaceted search strategy identified studies published between 1980 and 2007. Quality was assessed using the American Academy of Cerebral Palsy and Developmental Medicine (AACPDM) Study Quality Scale, the Clinical Relevance Tool for Case Studies, and the Quality, Rigour or Evaluative Criteria tool. Results: Seven studies (1982–2003) met our inclusion criteria; four of these used single-subject research designs, two were group studies, and one was a case study. Ages and behavioural characteristics of the children (N = 25) varied among the studies. Levels of evidence ranged from II to V (of a possible I–V). Study quality scores ranged from 2 to 5 (range: 0 to 7); mean = 3.9, mode = 5. Few studies in this area of PT practice have been published, and those identified scored low levels of rigour on the AACPDM criteria. Conclusions: Research suggests that exercise provides short-term reductions of stereotypic behaviours in children with ASD. Future research with stronger evidence levels, greater rigour, and longer-term outcome assessment is required to determine specific exercise parameters. PMID:20145777

Microbial quality of drinking water from microfiltered water dispensers.

PubMed

Sacchetti, R; De Luca, G; Dormi, A; Guberti, E; Zanetti, F

2014-03-01

A comparison was made between the microbial quality of drinking water obtained from Microfiltered Water Dispensers (MWDs) and that of municipal tap water. A total of 233 water samples were analyzed. Escherichia coli (EC), enterococci (ENT), total coliforms (TC), Staphylococcus aureus, Pseudomonas aeruginosa and heterotrophic plate count (HPC) at 22 °C and 37 °C were enumerated. In addition, information was collected about the principal structural and functional characteristics of each MWD in order to study the various factors that might influence the microbial quality of the water. EC and ENT were not detected in any of the samples. TC were never detected in the tap water but were found in 5 samples taken from 5 different MWDs. S. aureus was found in a single sample of microfiltered water. P. aeruginosa was found more frequently and at higher concentrations in the samples collected from MWDs. The mean HPCs at 22 °C and 37 °C were significantly higher in microfiltered water samples compared to those of the tap water. In conclusion, the use of MWDs may increase the number of bacteria originally present in tap water. It is therefore important to monitor the quality of the dispensed water over time, especially if it is destined for vulnerable users. Copyright © 2013 Elsevier GmbH. All rights reserved.

Spatial variation of air quality index and urban driving factors linkages: evidence from Chinese cities.

PubMed

Pu, Haixia; Luo, Kunli; Wang, Pin; Wang, Shaobin; Kang, Shun

2017-02-01

Daily air quality index (AQI) of 161 Chinese cities obtained from the Ministry of Environmental Protection of China in 2015 is conducted. In this study, to better explore spatial distribution and regional characteristic of AQI, global and local spatial autocorrelation is utilized. Pearson's correlation is introduced to determine the influence of single urban indicator on AQI value. Meanwhile, multiple linear stepwise regression is chosen to estimate quantitatively the most influential urban indicators on AQI. The spatial autocorrelation analysis indicates that the AQI value of Chinese 161 cities shows a spatial dependency. Higher AQI is mainly located in north and northwest regions, whereas low AQI is concentrated in the south and the Qinghai-Tibet regions. The low AQI and high AQI values in China both exhibit relative immobility through seasonal variation. The influence degree of three adverse urban driving factors on AQI value is ranked from high to low: coal consumption of manufacturing > building area > coal consumption of the power industry. It is worth noting that the risk of exposed population to poor quality is greater in the northern region than in other regions. The results of the study provide a reference for the formulation of urban policy and improvement of air quality in China.

On the definition of dominant force regimes for flow boiling heat transfer by using single mini-tubes

NASA Astrophysics Data System (ADS)

Baba, Soumei; Sawada, Kenichiro; Kubota, Chisato; Kawanami, Osamu; Asano, Hitoshi; Inoue, Koichi; Ohta, Haruhiko

Recent increase in the size of space platforms requires the management of larger amount of waste heat under high heat flux conditions and the transportation of it along a long distance to the radiator. Flow boiling applied to the thermal management system in space attracts much attention as promising means to realize high-performance heat transfer and transport because of large latent heat of vaporization. In microgravity two-phase flow phenomena are quite different from those under 1-g condition because buoyancy effects are significantly reduced and surface tension becomes dominant. By the similar reason, flow boiling characteristics in mini channels are not the same as those in channels of normal sizes. In the present stage, however, the boundary between the regimes of body force dominated and of surface tension dominated is not clear. The design of space thermal devices, operated under the conditions where no effect of gravity is expected, will improve the reliability of their ground tests, provided that the boundaries of dominant force regimes are clarified quantitatively in advance. In flow boiling in mini channels or in parallel channels, back flow could be occurred because of rapid growth of bubbles in a confined space, resulting flow rate fluctuation. Flow boiling heat transfer characteristics in mini channels can be changed considerably by the existence of inlet flow rate fluctuation. It is important to pay attention to experimental accuracy and to use a single circular mini-tube to compare heat transfer characteristics with those of normal size tubes. In the present paper, effects of tube orientations, i.e. vertical upward flow, vertical downward flow and horizontal flow, on flow boiling heat transfer characteristics is investigated for FC72 flowing in single mini-tubes with inner diameters of 0.13 and 0.51 mm to establish a reliable dominant force regime map. If the regime map is described by using dimensionless groups of Bond, Weber and Froude numbers, the boundary of dominant forces of inertia and body force is examined by using the mini-tube of the larger diameter at constant Bond number Bo = 0.51, and the boundary of inertia and surface tension by using the mini-tube of smaller diameter at Bo = 0.033. The influence of inertia is varied by the change of vapor quality, i.e. ratio of vapor mass flow rate to the total, under constant mass velocities, where the velocity of liquid-vapor mixtures is increased with increasing vapor quality. For the tube diameter of 0.51 mm, under low inertia conditions at Froude number Fr < 5, heat transfer coefficients were influenced by the tube orientation, while the heat transfer coefficients were almost independent of the orientation for Fr > 5. The results indicated that the boundary between the body force dominated and the inertia force dominated regimes was given by Froude number as Fr ˜ 5. On the other hand, for tube diameter of 0.13 mm, almost no effect of tube = orientation was observed for all combinations of mass velocity and vapor quality, and heat transfer coefficients were independent of vapor quality under low inertia conditions at Weber number We < 5, and vice versa. The results implied the boundary between the surface tension dominated and the inertia force dominated regimes was represented by We ˜ 5. = In addition, by the reflection of both results on the two-dimensional regime map, the boundary between the surface tension dominated and the body force dominated regimes was approx-imately evaluated as Bo ˜ 0.25 from the crossing point of two boundary lines. This value = located in the range of 0.033 < Bo < 0.51 is consistent with the boundaries between the sur-face tension dominated and the body force dominated regimes classified for the smaller and larger mini-tubes, respectively, under low inertia conditions.

Retrospective analysis of the quality of reports by author-suggested and non-author-suggested reviewers in journals operating on open or single-blind peer review models

PubMed Central

Kowalczuk, Maria K; Dudbridge, Frank; Nanda, Shreeya; Harriman, Stephanie L; Patel, Jigisha; Moylan, Elizabeth C

2015-01-01

Objectives To assess whether reports from reviewers recommended by authors show a bias in quality and recommendation for editorial decision, compared with reviewers suggested by other parties, and whether reviewer reports for journals operating on open or single-blind peer review models differ with regard to report quality and reviewer recommendations. Design Retrospective analysis of the quality of reviewer reports using an established Review Quality Instrument, and analysis of reviewer recommendations and author satisfaction surveys. Setting BioMed Central biology and medical journals. BMC Infectious Diseases and BMC Microbiology are similar in size, rejection rates, impact factors and editorial processes, but the former uses open peer review while the latter uses single-blind peer review. The Journal of Inflammation has operated under both peer review models. Sample Two hundred reviewer reports submitted to BMC Infectious Diseases, 200 reviewer reports submitted to BMC Microbiology and 400 reviewer reports submitted to the Journal of Inflammation. Results For each journal, author-suggested reviewers provided reports of comparable quality to non-author-suggested reviewers, but were significantly more likely to recommend acceptance, irrespective of the peer review model (p<0.0001 for BMC Infectious Diseases, BMC Microbiology and the Journal of Inflammation). For BMC Infectious Diseases, the overall quality of reviewer reports measured by the Review Quality Instrument was 5% higher than for BMC Microbiology (p=0.042). For the Journal of Inflammation, the quality of reports was the same irrespective of the peer review model used. Conclusions Reviewers suggested by authors provide reports of comparable quality to non-author-suggested reviewers, but are significantly more likely to recommend acceptance. Open peer review reports for BMC Infectious Diseases were of higher quality than single-blind reports for BMC Microbiology. There was no difference in quality of peer review in the Journal of Inflammation under open peer review compared with single blind. PMID:26423855

The best men are (not always) already taken: female preference for single versus attached males depends on conception risk.

PubMed

Bressan, Paola; Stranieri, Debora

2008-02-01

Because men of higher genetic quality tend to be poorer partners and parents than men of lower genetic quality, women may profit from securing a stable investment from the latter, while obtaining good genes via extrapair mating with the former. Only if conception occurs, however, do the evolutionary benefits of such a strategy overcome its costs. Accordingly, we predicted that (a) partnered women should prefer attached men, because such men are more likely than single men to have pair-bonding qualities, and hence to be good replacement partners, and (b) this inclination should reverse when fertility rises, because attached men are less available for impromptu sex than single men. In this study, 208 women rated the attractiveness of men described as single or attached. As predicted, partnered women favored attached men at the low-fertility phases of the menstrual cycle, but preferred single men (if masculine, i.e., advertising good genetic quality) when conception risk was high.

Fundamentals of human embryonic growth in vitro and the selection of high-quality embryos for transfer.

PubMed

Boiso, Irene; Veiga, Anna; Edwards, Robert G

2002-01-01

Knowledge of the nature of embryo growth, and the handling and scoring of quality in human embryos are significant aspects for embryologists in IVF clinics. This review describes the formation, growth and maturation of human oocytes, many aspects of fertilization in vitro, embryonic transcription during preimplantation stages, and the formation of polarities, timing controls, role of mitochondria and functions of endocrine and paracrine systems. Modern concepts are fully discussed, together with their significance in the practice of IVF. This knowledge is essential for the correct clinical care of human embryos growing in vitro, especially in view of their uncharacteristic tendency to vary widely in implantation potential. Underlying causes of such variation have not been identified. Stringent tests must be enforced to ensure human embryos develop under optimal conditions, and are scored for quality using the most advanced techniques. Optimal methods of culture are described, including methods such as co-culture introduced to improve embryo quality but less important today. Detailed attention is given to quality as assessed from embryonic characteristics determined by timers, polarities, disturbed embryo growth and anomalous cell cycles. Methods for classification are described. Approaches to single embryo transfers are described, including the use of sequential media to produce high-quality blastocysts. These approaches, and others involved in surgical methods to remove fragments, transfer ooplasm or utilize newer approaches such as preimplantation diagnosis of chromosomal complements in embryos are covered. New outlooks in this field are summarized.

Quality of life and emotional functioning in youth with chronic migraine and juvenile fibromyalgia.

PubMed

Kashikar-Zuck, Susmita; Zafar, Marium; Barnett, Kimberly A; Aylward, Brandon S; Strotman, Daniel; Slater, Shalonda K; Allen, Janelle R; Lecates, Susan L; Kabbouche, Marielle A; Ting, Tracy V; Hershey, Andrew D; Powers, Scott W

2013-12-01

Chronic pain in children is associated with significant negative impact on social, emotional, and school functioning. Previous studies on the impact of pain on children's functioning have primarily used mixed samples of pain conditions or single pain conditions (eg, headache and abdominal pain) with relatively small sample sizes. As a result, the similarities and differences in the impact of pain in subgroups of children with chronic pain have not been closely examined. To compare pain characteristics, quality of life, and emotional functioning among youth with pediatric chronic migraine (CM) and juvenile fibromyalgia (JFM). We combined data obtained during screening of patients for 2 relatively large intervention studies of youth (age range, 10 to 18 y) with CM (N=153) and JFM (N=151). Measures of pain intensity, quality of life (Pediatric Quality of Life; PedsQL, child and parent-proxy), depressive symptoms (Children's Depression Inventory), and anxiety symptoms (Adolescent Symptom Inventory-4-Anxiety subscale) were completed by youth and their parent. A multivariate analysis of covariance controlling for effects of age and sex was performed to examine differences in quality of life and emotional functioning between the CM and JFM groups. Youth with JFM had significantly higher anxiety and depressive symptoms, and lower quality of life in all domains. Among children with CM, overall functioning was higher but school functioning was a specific area of concern. Results indicate important differences in subgroups of pediatric pain patients and point to the need for more intensive multidisciplinary intervention for JFM patients.

Subjective Caregiver Burden and Caregiver Satisfaction: The Role of Partner Relationship Quality and Reciprocity.

PubMed

Tough, Hannah; Brinkhof, Martin W; Siegrist, Johannes; Fekete, Christine

2017-10-01

To explore the effect of relationship quality and reciprocity in partnerships on subjective caregiver burden and caregiver satisfaction in partners of persons with a severe physical disability (spinal cord injury). Cross-sectional, observational. Community setting. Caregiving partners of persons with spinal cord injury (N=118). Not applicable. Subjective caregiver burden measured by the Zarit Burden Interview (short form) and caregiver satisfaction measured by a single item on feelings of satisfaction resulting from the caregiver role. Caregiving partners who rated their relationship quality as high encountered less subjective caregiver burden (β=-1.10; 95% confidence interval [CI], -1.47 to -0.72; P<.001) and more caregiver satisfaction (odds ratio [OR], 1.18; 95% CI, 1.01-1.45; P=.049). These associations persisted even after controlling for sociodemographic characteristics, lesion severity of the care receiver, and objective caregiver burden. Partners who indicated high reciprocity in their relationship to the care receiver indicated less subjective caregiver burden and more caregiver satisfaction when relationship quality was excluded from the final models; however, the effect of reciprocity on subjective burden (β=-.38; 95% CI, -3.71 to 2.95; P=.82) and caregiver satisfaction (OR, 1.21; 95% CI, 0.28-5.22; P=.80) disappeared when including relationship quality. Results highlight the importance of relationship quality as a target for couple interventions aimed at reducing subjective caregiver burden and increasing satisfaction in the caregiving role. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Teaching Consumer Selection of Market Quality Beef by Observable Characteristics

ERIC Educational Resources Information Center

Halvorson, Dorothy; Jacobson, Marion

1977-01-01

Through a series of five tests, a slide-tape instructional presentation on the identification of beef quality was developed. It was determined that the slide-tape instruction can enable consumers to score more accurately characteristics of raw beef in relation to the characteristics of cooked beef. (Editor/TA)

Post-harvest and post-milling changes in wheat grain and flour quality characteristics

USDA-ARS?s Scientific Manuscript database

Soft red winter (SRW) wheat grain immediately after harvest and flour after milling were stored for 26 weeks and analyzed for comprehensive milling and baking quality characteristics at different time points to examine the consistency of the quality test results. Increases in falling number (FN) of ...

Seedling root targets

Treesearch

Diane L. Haase

2011-01-01

Roots are critical to seedling performance after outplanting. Although root quality is not as quick and simple to measure as shoot quality, target root characteristics should be included in any seedling quality assessment program. This paper provides a brief review of root characteristics most commonly targeted for operational seedling production. These are: root mass...

Identifying influential factors of business process performance using dependency analysis

NASA Astrophysics Data System (ADS)

Wetzstein, Branimir; Leitner, Philipp; Rosenberg, Florian; Dustdar, Schahram; Leymann, Frank

2011-02-01

We present a comprehensive framework for identifying influential factors of business process performance. In particular, our approach combines monitoring of process events and Quality of Service (QoS) measurements with dependency analysis to effectively identify influential factors. The framework uses data mining techniques to construct tree structures to represent dependencies of a key performance indicator (KPI) on process and QoS metrics. These dependency trees allow business analysts to determine how process KPIs depend on lower-level process metrics and QoS characteristics of the IT infrastructure. The structure of the dependencies enables a drill-down analysis of single factors of influence to gain a deeper knowledge why certain KPI targets are not met.

On thermal conditions and properties of thallium bromide single crystals grown by the Electro Dynamic Gradient method

NASA Astrophysics Data System (ADS)

Zheng, Zhiping; Yu, Yongtao; Gong, Shuping; Fu, Qiuyun; Zhou, Dongxiang

2013-05-01

The Electro Dynamic Gradient (EDG) method has been proved to be a feasible way to grow TlBr crystals in our previous work. In this research, the influence of thermal conditions such as cooling rate during growth process on the crystal performance was investigated. Crystals of approximately 12 mm diameter were obtained by the EDG method at different cooling rates during the growth process, and the quality of the crystals was routinely evaluated by X-ray diffraction (XRD), infrared (IR) and ultraviolet (UV) transmission, I-V measurement and energy response spectrum. The results proved that thermal conditions during growth had a profound influence on the characteristics of the crystals.

Cadmium Telluride Semiconductor Detector for Improved Spatial and Energy Resolution Radioisotopic Imaging

PubMed Central

Abbaspour, Samira; Mahmoudian, Babak; Islamian, Jalil Pirayesh

2017-01-01

The detector in single-photon emission computed tomography has played a key role in the quality of the images. Over the past few decades, developments in semiconductor detector technology provided an appropriate substitution for scintillation detectors in terms of high sensitivity, better energy resolution, and also high spatial resolution. One of the considered detectors is cadmium telluride (CdTe). The purpose of this paper is to review the CdTe semiconductor detector used in preclinical studies, small organ and small animal imaging, also research in nuclear medicine and other medical imaging modalities by a complete inspect on the material characteristics, irradiation principles, applications, and epitaxial growth method. PMID:28553175

Health Characteristics of Solo Grandparent Caregivers and Single Parents: A Comparative Profile Using the Behavior Risk Factor Surveillance Survey

PubMed Central

Whitley, Deborah M.

2015-01-01

Objectives. To describe the health characteristics of solo grandparents raising grandchildren compared with single parents. Methods. Using the 2012 Behavioral Risk Factor Surveillance System, respondents identified as a single grandparent raising a grandchild were categorized as a solo grandparent; grandparent responses were compared with single parents. Descriptive analysis compared health characteristics of 925 solo grandparents with 7,786 single parents. Results. Compared to single parents, grandparents have a higher prevalence of physical health problems (e.g., arthritis). Both parent groups have a high prevalence of lifetime depression. A larger share of grandparents actively smoke and did no recreational physical exercise in the last month. However, grandparents appear to have better access to health services in comparison with single parents. Conclusion. Solo grandparents may be at risk for diminished physical capacity and heightened prevalence of depression. Health professionals can be an important resource to increase grandparents' physical and emotional capacities. PMID:26448744

Health Characteristics of Solo Grandparent Caregivers and Single Parents: A Comparative Profile Using the Behavior Risk Factor Surveillance Survey.

PubMed

Whitley, Deborah M; Fuller-Thomson, Esme; Brennenstuhl, Sarah

2015-01-01

Objectives. To describe the health characteristics of solo grandparents raising grandchildren compared with single parents. Methods. Using the 2012 Behavioral Risk Factor Surveillance System, respondents identified as a single grandparent raising a grandchild were categorized as a solo grandparent; grandparent responses were compared with single parents. Descriptive analysis compared health characteristics of 925 solo grandparents with 7,786 single parents. Results. Compared to single parents, grandparents have a higher prevalence of physical health problems (e.g., arthritis). Both parent groups have a high prevalence of lifetime depression. A larger share of grandparents actively smoke and did no recreational physical exercise in the last month. However, grandparents appear to have better access to health services in comparison with single parents. Conclusion. Solo grandparents may be at risk for diminished physical capacity and heightened prevalence of depression. Health professionals can be an important resource to increase grandparents' physical and emotional capacities.

Multicriteria Gain Tuning for Rotorcraft Flight Controls (also entitled The Development of the Conduit Advanced Control System Design and Evaluation Interface with a Case Study Application Fly by Wire Helicopter Design)

NASA Technical Reports Server (NTRS)

Biezad, Daniel

1997-01-01

Handling qualities analysis and control law design would seem to be naturally complimenting components of aircraft flight control system design, however these two closely coupled disciplines are often not well integrated in practice. Handling qualities engineers and control system engineers may work in separate groups within an aircraft company. Flight control system engineers and handling quality specialists may come from different backgrounds and schooling and are often not aware of the other group's research. Thus while the handling qualities specifications represent desired aircraft response characteristics, these are rarely incorporated directly in the control system design process. Instead modem control system design techniques are based on servo-loop robustness specifications, and simple representations of the desired control response. Comprehensive handling qualities analysis is often left until the end of the design cycle and performed as a check of the completed design for satisfactory performance. This can lead to costly redesign or less than satisfactory aircraft handling qualities when the flight testing phase is reached. The desire to integrate the fields of handling qualities and flight,control systems led to the development of the CONDUIT system. This tool facilitates control system designs that achieve desired handling quality requirements and servo-loop specifications in a single design process. With CONDUIT, the control system engineer is now able to directly design and control systems to meet the complete handling specifications. CONDUIT allows the designer to retain a preferred control law structure, but then tunes the system parameters to meet the handling quality requirements.

The best of both worlds: automated CMP polishing of channel-cut monochromators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasman, Elina; Erdmann, Mark; Stoupin, Stanislav

2015-09-03

The use of a channel-cut monochromator is the most straightforward method to ensure that the two reflection surfaces maintain alignment between crystallographic planes without the need for complicated alignment mechanisms. Three basic characteristics that affect monochromator performance are: subsurface damage which contaminates spectral purity; surface roughness which reduces efficiency due to scattering; and surface figure error which imparts intensity structure and coherence distortion in the beam. Standard chemical-mechanical polishing processes and equipment are used when the diffracting surface is easily accessible, such as for single-bounce monochromators. Due to the inaccessibly of the surfaces inside a channel-cut monochromator for polishing, thesemore » optics are generally wet-etched for their final processing. This results in minimal subsurface damage, but very poor roughness and figure error. A new CMP channel polishing instrument design is presented which allows the internal diffracting surface quality of channel-cut crystals to approach that of conventional single-bounce monochromators« less

Characterization of the thin-film NbN superconductor for single-photon detection by transport measurements

NASA Astrophysics Data System (ADS)

Lin, Shi-Zeng; Ayala-Valenzuela, Oscar; McDonald, Ross D.; Bulaevskii, Lev N.; Holesinger, Terry G.; Ronning, Filip; Weisse-Bernstein, Nina R.; Williamson, Todd L.; Mueller, Alexander H.; Hoffbauer, Mark A.; Rabin, Michael W.; Graf, Matthias J.

2013-05-01

The fabrication of high-quality thin superconducting films is essential for single-photon detectors. Their device performance is crucially affected by their material parameters, thus requiring reliable and nondestructive characterization methods after the fabrication and patterning processes. Important material parameters to know are the resistivity, superconducting transition temperature, relaxation time of quasiparticles, and uniformity of patterned wires. In this work, we characterize micropatterned thin NbN films by using transport measurements in magnetic fields. We show that from the instability of vortex motion at high currents in the flux-flow state of the IV characteristic, the inelastic lifetime of quasiparticles can be determined to be about 2 ns. Additionally, from the depinning transition of vortices at low currents, as a function of magnetic field, the size distribution of grains can be extracted. This size distribution is found to be in agreement with the film morphology obtained from scanning electron microscopy and high-resolution transmission electron microscopy images.

Taguchi Based Regression Analysis of End-Wall Film Cooling in a Gas Turbine Cascade with Single Row of Holes

NASA Astrophysics Data System (ADS)

Ravi, D.; Parammasivam, K. M.

2016-09-01

Numerical investigations were conducted on a turbine cascade, with end-wall cooling by a single row of cylindrical holes, inclined at 30°. The mainstream fluid was hot air and the coolant was CO2 gas. Based on the Reynolds number, the flow was turbulent at the inlet. The film hole row position, its pitch and blowing ratio was varied with five different values. Taguchi approach was used in designing a L25 orthogonal array (OA) for these parameters. The end-wall averaged film cooling effectiveness (bar η) was chosen as the quality characteristic. CFD analyses were carried out using Ansys Fluent on computational domains designed with inputs from OA. Experiments were conducted for one chosen OA configuration and the computational results were found to correlate well with experimental measurements. The responses from the CFD analyses were fed to the statistical tool to develop a correlation for bar η using regression analysis.

Double Helical Gear Performance Results in High Speed Gear Trains

NASA Technical Reports Server (NTRS)

Handschuh, Robert F.; Ehinger, Ryan; Sinusas, Eric; Kilmain, Charles

2009-01-01

The operation of high speed gearing systems in the transmissions of tiltrotor aircraft has an effect on overall propulsion system efficiency. Recent work has focused on many aspects of high-speed helical gear trains as would be used in tiltrotor aircraft such as operational characteristics, comparison of analytical predictions to experimental data and the affect of superfinishing on transmission performance. Baseline tests of an aerospace quality system have been conducted in the NASA Glenn High-Speed Helical Gear Train Test Facility and have been described in earlier studies. These earlier tests had utilized single helical gears. The results that will be described in this study are those attained using double helical gears. This type of gear mesh can be configured in this facility to either pump the air-oil environment from the center gap between the meshing gears to the outside of tooth ends or in the reverse direction. Tests were conducted with both inward and outward air-oil pumping directions. Results are compared to the earlier baseline results of single helical gears.

Double Helical Gear Performance Results in High Speed Gear Trains

NASA Technical Reports Server (NTRS)

Handschuh, Robert F.; Ehinger, Ryan; Sinusas, Eric; Kilmain, Charles

2010-01-01

The operation of high speed gearing systems in the transmissions of tiltrotor aircraft has an effect on overall propulsion system efficiency. Recent work has focused on many aspects of high-speed helical gear trains as would be used in tiltrotor aircraft such as operational characteristics, comparison of analytical predictions to experimental data and the affect of superfinishing on transmission performance. Baseline tests of an aerospace quality system have been conducted in the NASA Glenn High-Speed Helical Gear Train Test Facility and have been described in earlier studies. These earlier tests had utilized single helical gears. The results that will be described in this study are those attained using double helical gears. This type of gear mesh can be configured in this facility to either pump the air-oil environment from the center gap between the meshing gears to the outside of tooth ends or in the reverse direction. Tests were conducted with both inward and outward air-oil pumping directions. Results are compared to the earlier baseline results of single helical gears.

Single Cell Oxygen Mapping (SCOM) by Scanning Electrochemical Microscopy Uncovers Heterogeneous Intracellular Oxygen Consumption.

PubMed

Santos, Carla Santana; Kowaltowski, Alicia J; Bertotti, Mauro

2017-09-12

We developed a highly sensitive oxygen consumption scanning microscopy system using platinized platinum disc microelectrodes. The system is capable of reliably detecting single-cell respiration, responding to classical regulators of mitochondrial oxygen consumption activity as expected. Comparisons with commercial multi-cell oxygen detection systems show that the system has comparable errors (if not smaller), with the advantage of being able to monitor inter and intra-cell heterogeneity in oxygen consumption characteristics. Our results uncover heterogeneous oxygen consumption characteristics between cells and within the same cell´s microenvironments. Single Cell Oxygen Mapping (SCOM) is thus capable of reliably studying mitochondrial oxygen consumption characteristics and heterogeneity at a single-cell level.

Determining weight and moisture properties of sound and fusarium-damaged single wheat kernels by near infrared spectroscopy

USDA-ARS?s Scientific Manuscript database

Single kernel moisture content (MC) is important in the measurement of other quality traits in single kernels since many traits are expressed on a dry weight basis, and MC affects viability, storage quality, and price. Also, if near-infrared (NIR) spectroscopy is used to measure grain traits, the in...

Personality characteristics and quality of life in patients treated for Cushing's syndrome.

PubMed

Sonino, Nicoletta; Bonnini, Stefano; Fallo, Francesco; Boscaro, Marco; Fava, Giovanni A

2006-03-01

Psychological distress does not always disappear upon proper endocrine treatment of Cushing's syndrome, and quality of life may still be compromised. Little is known on the personality correlates that may be involved. The aim of this study was to provide a controlled assessment of personality characteristics and quality of life in patients successfully treated for Cushing's syndrome. A single-centred, controlled, prospective study. Twenty-four consecutive outpatients who were in remission upon proper treatment of Cushing's syndrome for at least 1 year and no more than 3 years (20 with pituitary-dependent Cushing's disease and four with a cortisol-secreting adrenal adenoma; 5 M/19 F; mean age 34.5, SD = 10.6; range 18-57 years) were compared with 24 healthy control subjects matched for sociodemographic variables. Both patients and controls were administered two self-rating scales: (a) tridimensional personality questionnaire (TPQ), a 100-item inventory that yields three scales: novelty seeking, harm avoidance and reward dependence. (b) symptom rating test (SRT), a 46-item scale for assessing psychological distress and quality of life with six subscales (anxiety, depression, somatic symptoms, anger-hostility, cognitive symptoms, psychotic symptoms). There were no significant differences in personality dimensions, as measured by the TPQ, between patients and controls. The results did not change when the four patients with an adrenal adenoma were excluded and only the 20 with pituitary-dependent Cushing's disease were considered. As to the SRT scale, patients with Cushing's syndrome displayed significantly higher scores in anxiety (P= 0.046), depression (P= 0.013), and psychotic symptoms (P= 0.006), with a generalized compromised quality of life (P= 0.02). Again, no differences were found in evaluating the 20 patients with Cushing's disease separately. Even though personality traits other than those explored here may be involved, the results seem to exclude the presence of latent dysfunctional attitudes and beliefs contributing to long-standing psychological disturbances, even in the pituitary-dependent form of Cushing's syndrome. Data from larger populations might provide further insight in this field. The findings of a compromised quality of life are in agreement with the recent literature and have implications for the long-term management of patients.

Apperception of Clouds in AIRS Data

NASA Technical Reports Server (NTRS)

Huang, Hung-Lung; Smith, William L.

2005-01-01

Our capacity to simulate the radiative characteristics of the Earth system has advanced greatly over the past decade. However, new space based measurements show that idealized simulations might not adequately represent the complexity of nature. For example, AIRS simulated multi-layer cloud clearing research provides an excellent groundwork for early Atmospheric Infra-Red Sounder (AIRS) operational cloud clearing and atmospheric profile retrieval. However, it doesn't reflect the complicated reality of clouds over land and coastal areas. Thus far, operational AIRS/AMSU (Advanced Microwave Sounding Unit) cloud clearing is not only of low yield but also of unsatisfying quality. This is not an argument for avoiding this challenging task, rather a powerful argument for exploring other synergistic approaches, and for adapting these strategies toward improving both indirect and direct use of cloudy infrared sounding data. Ample evidence is shown in this paper that the indirect use of cloudy sounding data by way of cloud clearing is sub-optimal for data assimilation. Improvements are needed in quality control, retrieval yield, and overall cloud clearing retrieval performance. For example, cloud clearing over land, especially over the desert surface, has led to much degraded retrieval quality and often a very low yield of quality controlled cloud cleared radiances. If these indirect cloud cleared radiances are instead to be directly assimilated into NWP models, great caution must be used. Our limited and preliminary cloud clearing results from AIRS/AMSU (with the use of MODIS data) and an AIRS/MODIS synergistic approach have, however, shown that higher spatial resolution multispectral imagery data can provide much needed quality control of the AIRS/AMSU cloud clearing retrieval. When AIRS and Moderate Resolution Imaging Spectroradiometer (MODIS) are used synergistically, a higher spatial resolution over difficult terrain (especially desert areas) can be achieved and with a much improved accuracy. Preliminary statistical analyses of cloud cleared radiances derived from (1) operational AIRS/AMSU, (2) operational AIRS/AMSU plus the use of MODIS data as quality control, and (3) AIRS/MODIS synergistic single channel and two field of views cloud clearing are Our capacity to simulate the radiative characteristics of the Earth system has

Acoustic emission from single point machining: Part 2, Signal changes with tool wear. Revised

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heiple, C.R.; Carpenter, S.H.; Armentrout, D.L.

1989-12-31

Changes in acoustic emission signal characteristics with tool wear were monitored during single point machining of 4340 steel and Ti-6Al-4V heat treated to several strength levels, 606l-T6 aluminum, 304 stainless steel, 17-4PH stainless steel, 410 stainless steel, lead, and teflon. No signal characteristic changed in the same way with tool wear for all materials tested. A single change in a particular AE signal characteristic with tool wear valid for all materials probably does not exist. Nevertheless, changes in various signal characteristic with wear for a given material may be sufficient to be used to monitor tool wear.

Cowpea fresh pods - a new legume for the market: assessment of their quality and dietary characteristics of 37 cowpea accessions grown in southern Europe.

PubMed

Karapanos, Ioannis; Papandreou, Anastasia; Skouloudi, Marianna; Makrogianni, Despoina; Fernández, Juan A; Rosa, Eduardo; Ntatsi, Georgia; Bebeli, Penelope J; Savvas, Dimitrios

2017-10-01

Cowpea is traditionally cultivated in some regions of southern Europe for its dried seeds; however, there is a scarcity of information on the quality and dietary characteristics of fresh pods, which are occasionally used in folk diets. This paper aims at covering this gap in knowledge, thereby contributing to the dissemination of fresh cowpea pods as a novel product for the market. The quality and dietary characteristics of pods from 37 accessions (Vigna unguiculata ssp. unguiculata and ssp. sesquipedalis) grown in southern Europe were assessed in an attempt to provide information on pod quality and nutritional properties and to identify relationships between quality traits and accession origin. Pods from the sesquipedalis accessions were heavier and larger, and reached commercial maturity 2 days later, than those from the unguiculata accessions. There were also large differences in the quality and dietary characteristics of the accessions. The pods of most accessions were rich in proteins, chlorophylls, carotenoids and phenolics, and showed high antioxidant activity and low concentrations of nitrates and raffinose-family oligosaccharides. Cluster analysis based on quality, dietary or antinutritional traits did not reveal any apparent grouping among the accessions. All the quality characteristics were independent of accession origin and subspecies. Most of the accessions produced fresh pods of good quality and high dietary value, suitable for introduction in the market and/or for use as valuable genetic material for the development of new improved varieties. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Quality Appraisal of Single-Subject Experimental Designs: An Overview and Comparison of Different Appraisal Tools

ERIC Educational Resources Information Center

Wendt, Oliver; Miller, Bridget

2012-01-01

Critical appraisal of the research literature is an essential step in informing and implementing evidence-based practice. Quality appraisal tools that assess the methodological quality of experimental studies provide a means to identify the most rigorous research suitable for evidence-based decision-making. In single-subject experimental research,…

Applying Quality Indicators to Single-Case Research Designs Used in Special Education: A Systematic Review

ERIC Educational Resources Information Center

Moeller, Jeremy D.; Dattilo, John; Rusch, Frank

2015-01-01

This study examined how specific guidelines and heuristics have been used to identify methodological rigor associated with single-case research designs based on quality indicators developed by Horner et al. Specifically, this article describes how literature reviews have applied Horner et al.'s quality indicators and evidence-based criteria.…

Decreased production of higher alcohols by Saccharomyces cerevisiae for Chinese rice wine fermentation by deletion of Bat aminotransferases.

PubMed

Zhang, Cui-Ying; Qi, Ya-Nan; Ma, Hong-Xia; Li, Wei; Dai, Long-Hai; Xiao, Dong-Guang

2015-04-01

An appropriate level of higher alcohols produced by yeast during the fermentation is one of the most important factors influencing Chinese rice wine quality. In this study, BAT1 and BAT2 single- and double-gene-deletion mutant strains were constructed from an industrial yeast strain RY1 to decrease higher alcohols during Chinese rice wine fermentation. The results showed that the BAT2 single-gene-deletion mutant strain produced best improvement in the production of higher alcohols while remaining showed normal growth and fermentation characteristics. Furthermore, a BAT2 single-gene-deletion diploid engineered strain RY1-Δbat2 was constructed and produced low levels of isobutanol and isoamylol (isoamyl alcohol and active amyl alcohol) in simulated fermentation of Chinese rice wine, 92.40 and 303.31 mg/L, respectively, which were 33.00 and 14.20 % lower than those of the parental strain RY1. The differences in fermentation performance between RY1-Δbat2 and RY1 were minor. Therefore, construction of this yeast strain is important in future development in Chinese wine industry and provides insights on generating yeast strains for other fermented alcoholic beverages.

Figures of Merit Software: Description, User's Guide, Installation Notes, Versions Description, and License Agreement

NASA Technical Reports Server (NTRS)

hoelzer, H. D.; Fourroux, K. A.; Rickman, D. L.; Schrader, C. M.

2011-01-01

Figures of Merit (FoMs) and the FoM software provide a method for quantitatively evaluating the quality of a regolith simulant by comparing the simulant to a reference material. FoMs may be used for comparing a simulant to actual regolith material, specification by stating the value a simulant s FoMs must attain to be suitable for a given application and comparing simulants from different vendors or production runs. FoMs may even be used to compare different simulants to each other. A single FoM is conceptually an algorithm that computes a single number for quantifying the similarity or difference of a single characteristic of a simulant material and a reference material and provides a clear measure of how well a simulant and reference material match or compare. FoMs have been constructed to lie between zero and 1, with zero indicating a poor or no match and 1 indicating a perfect match. FoMs are defined for modal composition, particle size distribution, particle shape distribution, (aspect ratio and angularity), and density. This TM covers the mathematics, use, installation, and licensing for the existing FoM code in detail.

Eddy current correction in volume-localized MR spectroscopy

NASA Technical Reports Server (NTRS)

Lin, C.; Wendt, R. E. 3rd; Evans, H. J.; Rowe, R. M.; Hedrick, T. D.; LeBlanc, A. D.

1994-01-01

The quality of volume-localized magnetic resonance spectroscopy is affected by eddy currents caused by gradient switching. Eddy currents can be reduced with improved gradient systems; however, it has been suggested that the distortion due to eddy currents can be compensated for during postprocessing with a single-frequency reference signal. The authors propose modifying current techniques for acquiring the single-frequency reference signal by using relaxation weighting to reduce interference from components that cannot be eliminated by digital filtering alone. Additional sequences with T1 or T2 weighting for reference signal acquisition are shown to have the same eddy current characteristics as the original signal without relaxation weighting. The authors also studied a new eddy current correction method that does not require a single-frequency reference signal. This method uses two free induction decays (FIDs) collected from the same volume with two sequences with opposite gradients. Phase errors caused by eddy currents are opposite in these two FIDs and can be canceled completely by combining the FIDs. These methods were tested in a phantom. Eddy current distortions were corrected, allowing quantitative measurement of structures such as the -CH = CH- component, which is otherwise undetectable.

Understanding the Socioeconomic Effects of Wildfires on Western U.S. Public Lands

NASA Astrophysics Data System (ADS)

Sanchez, J. J.; Srivastava, L.; Marcos-Martinez, R.

2017-12-01

Climate change has resulted in the increased severity and frequency of forest disturbances due to wildfires, droughts, pests and diseases that compromise the sustainable provision of forest ecosystem services (e.g., water quantity and quality, carbon sequestration, recreation). A better understanding of the environmental and socioeconomic consequences of forest disturbances (i.e., wildfires) could improve the management and protection of public lands. We used a single-site benefit transfer function and spatially explicit information for demographic, socioeconomic, and site-specific characteristics to estimate the monetized value of market and non-market ecosystem services provided by forests on Western US public lands. These estimates are then used to approximate the costs of forest disturbances caused by wildfires of varying frequency and intensity, and across sites with heterogeneous characteristics and protection and management strategies. Our analysis provides credible estimates of the benefits of the forest for land management by the United States Forest Service, thereby assisting forest managers in planning resourcing and budgeting priorities.

Epidemiology of Mental Health Attendances at Emergency Departments: Systematic Review and Meta-Analysis

PubMed Central

Rojas-García, Antonio; Clarke, Katherine; Moore, Anna; Whittington, Craig; Stockton, Sarah; Thomas, James; Pilling, Stephen; Raine, Rosalind

2016-01-01

Background The characteristics of Emergency Department (ED) attendances due to mental or behavioural health disorders need to be described to enable appropriate development of services. We aimed to describe the epidemiology of mental health-related ED attendances within health care systems free at the point of access, including clinical reason for presentation, previous service use, and patient sociodemographic characteristics. Method Systematic review and meta-analysis of observational studies describing ED attendances by patients with common mental health conditions. Findings 18 studies from seven countries met eligibility criteria. Patients attending due to mental or behavioural health disorders accounted for 4% of ED attendances; a third were due to self-harm or suicidal ideation. 58.1% of attendees had a history of psychiatric illness and up to 58% were admitted. The majority of studies were single site and of low quality so results must be interpreted cautiously. Conclusions Prevalence studies of mental health-related ED attendances are required to enable the development of services to meet specific needs. PMID:27120350

Designing and evaluating the MULTICOM protein local and global model quality prediction methods in the CASP10 experiment

PubMed Central

2014-01-01

Background Protein model quality assessment is an essential component of generating and using protein structural models. During the Tenth Critical Assessment of Techniques for Protein Structure Prediction (CASP10), we developed and tested four automated methods (MULTICOM-REFINE, MULTICOM-CLUSTER, MULTICOM-NOVEL, and MULTICOM-CONSTRUCT) that predicted both local and global quality of protein structural models. Results MULTICOM-REFINE was a clustering approach that used the average pairwise structural similarity between models to measure the global quality and the average Euclidean distance between a model and several top ranked models to measure the local quality. MULTICOM-CLUSTER and MULTICOM-NOVEL were two new support vector machine-based methods of predicting both the local and global quality of a single protein model. MULTICOM-CONSTRUCT was a new weighted pairwise model comparison (clustering) method that used the weighted average similarity between models in a pool to measure the global model quality. Our experiments showed that the pairwise model assessment methods worked better when a large portion of models in the pool were of good quality, whereas single-model quality assessment methods performed better on some hard targets when only a small portion of models in the pool were of reasonable quality. Conclusions Since digging out a few good models from a large pool of low-quality models is a major challenge in protein structure prediction, single model quality assessment methods appear to be poised to make important contributions to protein structure modeling. The other interesting finding was that single-model quality assessment scores could be used to weight the models by the consensus pairwise model comparison method to improve its accuracy. PMID:24731387

Designing and evaluating the MULTICOM protein local and global model quality prediction methods in the CASP10 experiment.

PubMed

Cao, Renzhi; Wang, Zheng; Cheng, Jianlin

2014-04-15

Protein model quality assessment is an essential component of generating and using protein structural models. During the Tenth Critical Assessment of Techniques for Protein Structure Prediction (CASP10), we developed and tested four automated methods (MULTICOM-REFINE, MULTICOM-CLUSTER, MULTICOM-NOVEL, and MULTICOM-CONSTRUCT) that predicted both local and global quality of protein structural models. MULTICOM-REFINE was a clustering approach that used the average pairwise structural similarity between models to measure the global quality and the average Euclidean distance between a model and several top ranked models to measure the local quality. MULTICOM-CLUSTER and MULTICOM-NOVEL were two new support vector machine-based methods of predicting both the local and global quality of a single protein model. MULTICOM-CONSTRUCT was a new weighted pairwise model comparison (clustering) method that used the weighted average similarity between models in a pool to measure the global model quality. Our experiments showed that the pairwise model assessment methods worked better when a large portion of models in the pool were of good quality, whereas single-model quality assessment methods performed better on some hard targets when only a small portion of models in the pool were of reasonable quality. Since digging out a few good models from a large pool of low-quality models is a major challenge in protein structure prediction, single model quality assessment methods appear to be poised to make important contributions to protein structure modeling. The other interesting finding was that single-model quality assessment scores could be used to weight the models by the consensus pairwise model comparison method to improve its accuracy.

Optical characteristics of novel bulk and nanoengineered laser host materials

NASA Astrophysics Data System (ADS)

Prasad, Narasimha S.; Sova, Stacey; Kelly, Lisa; Bevan, Talon; Arnold, Bradley; Cooper, Christopher; Choa, Fow-Sen; Singh, N. B.

2018-02-01

The hexagonal apatite single crystals have been investigated for their applications as laser host materials. Czochralksi and flux growth methods have been utilized to obtain single crystals. For low temperature processing (<100 0C), several techniques for crystal growth have been developed. The hexagonal apatite structure (space group P63/m) is characteristic of several compounds, some of which have extremely interesting and useful properties as laser hosts and bone materials. Calcium lanthanum silicate (Nd-doped) and lanthanum aluminate material systems were studied in detail. Nanoengineered calcium and lanthanum based silicates were synthesized by a solution method and their optical and morphological characteristics were compared with Czochralski grown bulk hydroxyapatite single crystals. Materials were evaluated by absorbance, fluorescence and Raman characteristics. Neodymium, iron and chromium doped crystals grown by a solution method showed weak but similar optical properties to that of Czochralski grown single crystals.

The best management of SuDS treatment trains: a holistic approach.

PubMed

Bastien, Nicolas; Arthur, Scott; Wallis, Stephen; Scholz, Miklas

2010-01-01

The use of Sustainable Drainage Systems (SuDS) or Best Management Practice (BMP) is becoming increasingly common. However, rather than adopting the preferred "treatment train" implementation, many developments opt for end of pipe control ponds. This paper discusses the use of SuDS in series to form treatment trains and compares their potential performance and effectiveness with end of pipe solutions. Land-use, site and catchment characteristics have been used alongside up-to-date guidance, Infoworks CS and MUSIC to determine whole-life-costs, land-take, water quality and water quantity for different SuDS combinations. The results presented show that the use of a treatment train allows approaches differing from the traditional use of single SuDS, either source or "end of pipe", to be proposed to treat and attenuate runoff. The outcome is a more flexible solution where the footprint allocated to SuDS, costs and water quality can be managed differently to satisfy more efficiently the holistically stakeholders' objectives.

ON THE DEGREE OF CONVERSION AND COEFFICIENT OF THERMAL EXPANSION OF A SINGLE FIBER COMPOSITE USING A FBG SENSOR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lai, M.; Botsis, J.; Coric, D.

2008-08-28

The increasing needs of extending the lifetime in high-technology fields, such as space and aerospace, rail transport and naval systems, require quality enhancing of the composite materials either from a processing standing point or in the sense of resistance to service conditions. It is well accepted that the final quality of composite materials and structures is strongly influenced by processing parameters like curing and post-curing temperatures, rate of heating and cooling, applied vacuum, etc. To optimize manufacturing cycles, residual strains evolution due to chemical shrinkage and other physical parameters of the constituent materials must be characterized in situ. Such knowledgemore » can lead to a sensible reduction in defects and to improved physical and mechanical properties of final products. In this context continuous monitoring of strains distribution developed during processing is important in understanding and retrieving components' and materials' characteristics such as local strains gradients, degree of curing, coefficient of thermal expansion, moisture absorption, etc.« less

Rethinking adherence.

PubMed

Steiner, John F

2012-10-16

In 2012, the Centers for Medicare & Medicaid Services (CMS) will introduce measures of adherence to oral hypoglycemic, antihypertensive, and cholesterol-lowering drugs into its Medicare Advantage quality program. To meet these quality goals, delivery systems will need to develop and disseminate strategies to improve adherence. The design of adherence interventions has too often been guided by the mistaken assumptions that adherence is a single behavior that can be predicted from readily available patient characteristics and that individual clinicians alone can improve adherence at the population level.Effective interventions require recognition that adherence is a set of interacting behaviors influenced by individual, social, and environmental forces; adherence interventions must be broadly based, rather than targeted to specific population subgroups; and counseling with a trusted clinician needs to be complemented by outreach interventions and removal of structural and organizational barriers. To achieve the adherence goals set by CMS, front-line clinicians, interdisciplinary teams, organizational leaders, and policymakers will need to coordinate efforts in ways that exemplify the underlying principles of health care reform.

Relativistic Prolapse-Free Gaussian Basis Sets of Quadruple-ζ Quality: (aug-)RPF-4Z. III. The f-Block Elements.

PubMed

Teodoro, Tiago Quevedo; Visscher, Lucas; da Silva, Albérico Borges Ferreira; Haiduke, Roberto Luiz Andrade

2017-03-14

The f-block elements are addressed in this third part of a series of prolapse-free basis sets of quadruple-ζ quality (RPF-4Z). Relativistic adapted Gaussian basis sets (RAGBSs) are used as primitive sets of functions while correlating/polarization (C/P) functions are chosen by analyzing energy lowerings upon basis set increments in Dirac-Coulomb multireference configuration interaction calculations with single and double excitations of the valence spinors. These function exponents are obtained by applying the RAGBS parameters in a polynomial expression. Moreover, through the choice of C/P characteristic exponents from functions of lower angular momentum spaces, a reduction in the computational demand is attained in relativistic calculations based on the kinetic balance condition. The present study thus complements the RPF-4Z sets for the whole periodic table (Z ≤ 118). The sets are available as Supporting Information and can also be found at http://basis-sets.iqsc.usp.br .

Performance and emissions characteristics of aqueous alcohol fumes in a DI diesel engine

NASA Technical Reports Server (NTRS)

Heisey, J. B.; Lestz, S. S.

1981-01-01

A single cylinder DI Diesel engine was fumigated with ethanol and methanol in amounts up to 55% of the total fuel energy. The effects of aqueous alcohol fumigation on engine thermal efficiency, combustion intensity and gaseous exhaust emissions were determined. Assessment of changes in the biological activity of raw particulate and its soluble organic fraction were also made using the Salmonella typhimurium test. Alcohol fumigation improved thermal efficiency slightly at moderate and heavy loads, but increased ignition delay at all operating conditions. Carbon monoxide and unburned hydrocarbon emission generally increased with alcohol fumigation and showed no dependence on alcohol type or quality. Oxide of nitrogen emission showed a strong dependence on alcohol quality; relative emission levels decreased with increasing water content of the fumigant. Particulate mass loading rates were lower for ethanol fueled conditions. However, the biological activity of both the raw particulate and its soluble organic fraction was enhanced by ethanol fumigation at most operating conditions.

Fast and robust wavelet-based dynamic range compression and contrast enhancement model with color restoration

NASA Astrophysics Data System (ADS)

Unaldi, Numan; Asari, Vijayan K.; Rahman, Zia-ur

2009-05-01

Recently we proposed a wavelet-based dynamic range compression algorithm to improve the visual quality of digital images captured from high dynamic range scenes with non-uniform lighting conditions. The fast image enhancement algorithm that provides dynamic range compression, while preserving the local contrast and tonal rendition, is also a good candidate for real time video processing applications. Although the colors of the enhanced images produced by the proposed algorithm are consistent with the colors of the original image, the proposed algorithm fails to produce color constant results for some "pathological" scenes that have very strong spectral characteristics in a single band. The linear color restoration process is the main reason for this drawback. Hence, a different approach is required for the final color restoration process. In this paper the latest version of the proposed algorithm, which deals with this issue is presented. The results obtained by applying the algorithm to numerous natural images show strong robustness and high image quality.

Sociodemographic characteristics and attitudes towards motherhood among single women compared with cohabiting women treated with donor semen - a Danish multicenter study.

PubMed

Salomon, Maria; Sylvest, Randi; Hansson, Helena; Nyboe Andersen, Anders; Schmidt, Lone

2015-05-01

To examine sociodemographic characteristics, family backgrounds, reproductive histories, and attitudes towards motherhood in single vs. cohabiting women seeking treatment with donor semen. Baseline data collection in a multicenter cohort study. All nine public fertility clinics in Denmark. In total n = 311 childless women initiating assisted reproduction using donor semen. Self-reported questionnaire responses from n = 184 single women seeking treatment by using donor semen were compared with responses from n = 127 cohabiting women. Sociodemographic characteristics, family backgrounds, reproductive histories, attitudes towards motherhood. Single women were 3.5 years older on average when initiating treatment compared with cohabiting women. No significant differences were found regarding sociodemographic characteristics, previous long-term relationships, previous pregnancies, or attitudes towards motherhood between single women and cohabiting women. The vast majority of single women wanted to achieve parenthood with a partner, 85.8% wished to have a partner in the future, and approximately half of them preferred for a partner to take parental responsibilities. In this study single women seeking treatment with donor semen in the public health system did not differ from cohabiting women, except that they were older. To be a single mother by choice is not their preferred way of parenthood, but a solution they needed to accept. © 2015 Nordic Federation of Societies of Obstetrics and Gynecology.

Anxiety disorders and the quality of relationships with friends, relatives, and romantic partners.

PubMed

Priest, Jacob B

2013-01-01

Though research suggests support for the association between marital quality and anxiety disorders, less is known about relationship quality with relatives and friends and anxiety disorders. Using data from the Collaborative Psychiatric Epidemiology Surveys (n = 9912; mean age 44.8; 52.2% female), the association between relationship quality with relatives, friends, and romantic partners and anxiety disorders is examined for those who are divorced, single, or married. For those who are single or divorced, relationship quality with relatives and friends was associated with many anxiety disorders including agoraphobia, social phobia, and generalized anxiety disorder. For those who are married, relationship quality with relatives and partners was associated with generalized anxiety disorder and posttraumatic stress disorder. Given that those with anxiety disorders have higher rates of divorce and are more likely to be single, examining the relationship quality with relatives and friends, in addition to romantic partners, may be important for understanding the onset and course of anxiety disorders. © 2012 Wiley Periodicals, Inc.

Staff Assist: A Resource to Improve Nursing Home Quality and Staffing

ERIC Educational Resources Information Center

Castle, Nicholas G.

2011-01-01

Purpose: This study describes the creation and use of a web-based resource, designed to help nursing homes implement quality improvements through changes in staffing characteristics. Design and Methods: Information on staffing characteristics (i.e., staffing levels, turnover, stability, and use of agency staff), facility characteristics (e.g.,…

CALiPER Retail Lamps Study 3.1: Dimming, Flicker, and Power Quality Characteristics of LED A Lamps

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2014-12-31

This CALiPER report examines the characteristics of a subset of lamps from CALiPER Retail Lamps Study 3 in more detail. Specifically, it focuses on the dimming, power quality, and flicker characteristics of 14 LED A lamps, as controlled by four different retail-available dimmers.

Predictors of Global Quality in Family Child Care Homes: Structural and Belief Characteristics

ERIC Educational Resources Information Center

Hughes-Belding, Kere; Hegland, Susan; Stein, Amanda; Sideris, John; Bryant, Donna

2012-01-01

Research Findings: With a substantial number of young children receiving care in family child care settings, an examination of the characteristics, both structural and attitudinal, that predict program quality is warranted. The current study examines gaps in the research by examining both structural characteristics and provider beliefs that…

Quality Characteristics of a Graduate Teacher Education Program in Graphic Communications: Results from a Delphi Research Study.

ERIC Educational Resources Information Center

Clark, Aaron C.; Scales, Alice Y.

2000-01-01

Investigates characteristics of a quality program in graphic communications teacher education with involvement of professionals in the field. Uses the Delphi technique to achieve consensus on the characteristics that they felt compromised a good educational program for future graphics teachers. (Contains 27 references.) (Author/YDS)

Persistent Atrial Fibrillation Ablation in Females: Insight from the MAGIC-AF Trial.

PubMed

Singh, Sheldon M; D'Avila, Andre; Aryana, Arash; Kim, Young-Hoon; Mangrum, J Michael; Michaud, Gregory F; Dukkipati, Srinivas R; Heist, E Kevin; Barrett, Conor D; Thorpe, Kevin E; Reddy, Vivek Y

2016-07-27

Atrial fibrillation (AF) ablation is less frequently performed in women when compared to men. There are conflicting data on the safety and efficacy of AF ablation in women. The objective of this study was to compare the clinical characteristics and outcomes in a contemporary cohort of men and women undergoing persistent AF ablation procedures. A total of 182 men and 53 women undergoing a first-ever persistent AF catheter ablation procedure in The Modified Ablation Guided by Ibutilide Use in Chronic Atrial Fibrillation (MAGIC-AF) trial were evaluated. Clinical and procedural characteristics were compared between each gender. The primary efficacy endpoint was the 1-year single procedure freedom from atrial arrhythmia off anti-arrhythmic drugs. Women undergoing catheter ablation procedures were older than men (P < 0.001). The duration of AF and associated co-morbidities were similar between both genders. Single procedure drug-free atrial arrhythmia recurrence occurred in 53% of the cohort with no difference based on gender (men = 54%, women = 53%; P = 1.0). Procedural (P = 0.04), fluoroscopic (P = 0.02), and ablation times (P = 0.003) were shorter in women compared to men. Periprocedural complications and postablation improvement in quality of life were similar between men and women. Women undergoing a first-ever persistent AF ablation procedure were older but had similar clinical outcomes and complications when compared with men. © 2016 Wiley Periodicals, Inc.

Characteristics and Quality of Autism Websites

ERIC Educational Resources Information Center

Reichow, Brian; Halpern, Jason I.; Steinhoff, Timothy B.; Letsinger, Nicole; Naples, Adam; Volkmar, Fred R.

2012-01-01

The World Wide Web is a common method for obtaining information on autism spectrum disorders, however, there are no guidelines for finding websites with high quality. We conducted two studies examining the characteristics and/or quality of autism websites in 2009 and 2010. We found websites with a .gov top-level domain had a statistically…

An Examination of the Quality of Leadership Studies Dissertations and Characteristics of Successful Doctoral Graduates

ERIC Educational Resources Information Center

Richardson, Paul Truman

2013-01-01

This qualitative study sought to characterize what constitutes quality in leadership studies dissertations. The individual opinions of twenty doctoral faculty members were solicited to identify characteristics of leadership studies dissertation quality. The study further sought to identify possible areas of agreement among participants about the…

Expert Voices: What Cooperating Teachers and Teacher Candidates Say about Quality Student Teaching Placements and Experiences

ERIC Educational Resources Information Center

Torrez, Cheryl A. Franklin; Krebs, Marjori M.

2012-01-01

This study investigated characteristics and attributes of the student teaching experience to better understand what makes a quality student teaching experience. This article reflects a holistic approach by addressing the overall context of a quality student teaching experience that includes the environment, characteristics of successful…

A Project to Enhance Superintendents' Knowledge and Application of Characteristics of High Quality Teachers

ERIC Educational Resources Information Center

Pummill, Bret L.; Edson, Jerry C.; Loftin, Michelle M.; Robinson, Matthew A.

2011-01-01

This report describes a problem based learning project focusing on superintendents' knowledge of the characteristics of high quality teachers. Current research findings offer evidence teacher quality is an important school variable related to student achievement. School district leaders are faced with the problem of identifying the characteristics…

Income, family characteristics, and physical violence toward children.

PubMed

Berger, Lawrence M

2005-02-01

This paper discusses the ways in which existing microeconomic theories of partner abuse, intra-family bargaining, and distribution of resources within families may contribute to our current understanding of physical child abuse. The empirical implications of this discussion are then tested on data from the 1985 National Family Violence Survey (NFVS) in order to estimate the effects of income, family characteristics, and state characteristics on physical violence toward children. The sample consists of 2,760 families with children from the NFVS. Probit and ordered probit models are used to explore relationships between income, family characteristics, state characteristics, and physical violence toward children among single-parent and two-parent families. In both single-parent and two-parent families, depression, maternal alcohol consumption, and history of family violence affect children's probabilities of being abused. Additionally, income is significantly related to violence toward children in single-parent families. These results reinforce earlier findings that demographic characteristics, maternal depression, maternal alcohol use, and intra-family patterns of violence may largely contribute to child abuse. This research also suggests that income may play a substantially more important role in regard to parental violence in single-parent families than in two-parent families.

Comparative release studies on suppositories using the basket, paddle, dialysis tubing and flow-through cell methods I. Acetaminophen in a lipophilic base suppository.

PubMed

Hori, Seiichi; Kawada, Tsubasa; Kogure, Sanae; Yabu, Shinako; Mori, Kenji; Akimoto, Masayuki

2017-02-01

The release characteristics of lipophilic suppositories containing acetaminophen (AAP) were examined using four types of dissolution methods: the basket, paddle, dialysis tubing (DT) and flow-through cell (FTC) methods. The suitability of each apparatus for quality control in AAP compounded suppositories was evaluated using statistical procedures. More than 80% of the drug was released over 60 min in all the release methods studied, with the exception of the basket method. Reproducible and faster release was achieved using the paddle method at 100 and 200 rpm, whereas poor release occurred with the basket method. The mean dissolution time (MDT), maximum dissolved quantity of AAP at the end of the sampling time (Q) and dissolution efficiency (DE) were calculated by model-independent methods. The FTC method with a single chamber used in this study was also appreciable for AAP suppositories (Q of 100%, MDT of 71-91 min and DE of 75-80%). The DT apparatus is considered similar to the FTC apparatus from a quality control perspective for judging the release properties of lipophilic base suppositories containing AAP. However, even the single chamber FTC used in this study has potential as an in vitro drug release test for suppositories. The comparative dissolution method is expected to become one of the valuable tools for selecting an adequate dissolution test.

Single site laparoscopy for fertility preservation: a cohort study.

PubMed

Núñez Valera, María José; Padilla Iserte, Pablo; Higueras García, Gema; Herraiz, Sonia; Rubio, José María; Romeu Villarroya, Mónica; Pellicer, Antonio; Díaz-García, César

2015-02-01

To compare operative and postoperative results of ovarian cortex retrieval by conventional laparoscopy (1cm umbilical site and 3 accessory 5-mm-reusable working ports) (HASS) versus single site laparoscopy (SSL). Prospective cohort study. Fertility Preservation Programme at La Fe University Hospital-University of Valencia, Valencia, Spain, 2011 to 2012. Fertility Preservation Programme at La Fe University Hospital of Valencia, Valencia, Spain. Twenty-one patients with cancer (breast cancer: n = 17; Hodgkin's lymphoma: n = 3; and non-Hodgkin's lymphoma: n = 1). Ovarian cortex retrieval either by conventional laparoscopy using an umbilical Hasson port and 3 accessory ports (HASS group: n = 11) or by SSL (SSL group: n = 10). Operative length, blood loss, postoperative pain (visual analog scale for pain at 6, 24, and 48 hours), need of additional analgesia, quality of life (European Quality of Life-5 Dimensions), cosmesis of the scar, and patient's self-perception were assessed at 24 and 48 hours and 3 months after surgery. Baseline characteristics were similar between groups. Estimated blood loss, operative length, and postoperative pain did not differ between groups. The start of chemotherapy was not delayed in either group, and cosmesis and image self-perception were also similar. The SSL approach can be considered a safe option compared with the classic multisite approach. Copyright © 2015 AAGL. Published by Elsevier Inc. All rights reserved.

Evaluation of the quality of herbal teas by DART/TOF-MS.

PubMed

Prchalová, J; Kovařík, F; Rajchl, A

2017-02-01

The paper focuses on the optimization, settings and validation of direct analysis in real time coupled with time-of-flight detector when used for the evaluation of the quality of selected herbal teas (fennel, chamomile, nettle, linden, peppermint, thyme, lemon balm, marigold, sage, rose hip and St. John's wort). The ionization mode, the optimal ionization temperature and the type of solvent for sample extraction were optimized. The characteristic compounds of the analysed herbal teas (glycosides, flavonoids and phenolic and terpenic substances, such as chamazulene, anethole, menthol, thymol, salviol and hypericin) were detected. The obtained mass spectra were evaluated by multidimensional chemometric methods, such as cluster analysis, linear discriminate analysis and principal component analysis. The chemometric methods showed that the single variety herbal teas were grouped according to their taxonomic affiliation. The developed method is suitable for quick identification of herbs and can be potentially used for assessing the quality and authenticity of herbal teas. Direct analysis in real time/time-of-flight-MS is also suitable for the evaluation of selected substances contained in the mentioned herbs and herbal products. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Motion-related resource allocation in dynamic wireless visual sensor network environments.

PubMed

Katsenou, Angeliki V; Kondi, Lisimachos P; Parsopoulos, Konstantinos E

2014-01-01

This paper investigates quality-driven cross-layer optimization for resource allocation in direct sequence code division multiple access wireless visual sensor networks. We consider a single-hop network topology, where each sensor transmits directly to a centralized control unit (CCU) that manages the available network resources. Our aim is to enable the CCU to jointly allocate the transmission power and source-channel coding rates for each node, under four different quality-driven criteria that take into consideration the varying motion characteristics of each recorded video. For this purpose, we studied two approaches with a different tradeoff of quality and complexity. The first one allocates the resources individually for each sensor, whereas the second clusters them according to the recorded level of motion. In order to address the dynamic nature of the recorded scenery and re-allocate the resources whenever it is dictated by the changes in the amount of motion in the scenery, we propose a mechanism based on the particle swarm optimization algorithm, combined with two restarting schemes that either exploit the previously determined resource allocation or conduct a rough estimation of it. Experimental simulations demonstrate the efficiency of the proposed approaches.

Peripheral Facial Palsy: Does Patients' Religiousness Matter for the Otorhinolaryngologist?

PubMed

Lucchetti, Giancarlo; De Rossi, Janaina; Gonçalves, Juliane P B; Lucchetti, Alessandra L Granero

2016-06-01

In order to deal with the suffering, a frequent strategy employed by patients is the use of religious beliefs and behaviors. Nevertheless, few studies in otorhinolaryngology have investigated this dimension. Therefore, the present study aims to investigate the role of religiousness on quality of life, mental health, self-esteem and appearance in 116 patients with peripheral facial palsy (PFP). A cross-sectional, single-center study was carried out between 2010 and 2012 in PFP outpatients. We assessed socio-demographic data, PFP characteristics, depression, anxiety, quality of life, self-esteem, appearance and religiosity. A linear regression (adjusted for confounders) was performed to investigate whether religiosity was associated with any outcomes. The present study found that religious attendance, but not other types of religiousness, was related to quality of life and mental health on PFP patients. In addition, ENT patients would like their doctors to ask them about their faith and religion as part of their medical care. These findings give further support to the importance of religious and spiritual beliefs on ENT patients. Otorhinolaryngologists should be aware of the positive and negative aspects of religion and be prepared to address these issues in clinical practice.

Characterization and performance of injection molded poly(methylmethacrylate) microchips for capillary electrophoresis

PubMed Central

Nikcevic, Irena; Lee, Se Hwan; Piruska, Aigars; Ahn, Chong H.; Ridgway, Thomas H.; Limbach, Patrick A.; Wehmeyer, K. R.; Heineman, William R.; Seliskar, Carl J.

2009-01-01

Injection molded poly(methylmethacrylate) (IM-PMMA), chips were evaluated as potential candidates for capillary electrophoresis disposable chip applications. Mass production and usage of plastic microchips depends on chip-to-chip reproducibility and on analysis accuracy. Several important properties of IM-PMMA chips were considered: fabrication quality evaluated by environmental scanning electron microscope imaging, surface quality measurements, selected thermal/electrical properties as indicated by measurement of the current versus applied voltage (I–V) characteristic, and the influence of channel surface treatments. Electroosmotic flow was also evaluated for untreated and O2 reactive ion etching (RIE) treated surface microchips. The performance characteristics of single lane plastic microchip capillary electrophoresis (MCE) separations were evaluated using a mixture of two dyes - fluorescein (FL) and fluorescein isothiocyanate (FITC). To overcome non-wettability of the native IM-PMMA surface, a modifier, polyethylene oxide was added to the buffer as a dynamic coating. Chip performance reproducibility was studied for chips with and without surface modification via the process of RIE with O2 and by varying the hole position for the reservoir in the cover plate or on the pattern side of the chip. Additionally, the importance of reconditioning steps to achieve optimal performance reproducibility was also examined. It was found that more reproducible quantitative results were obtained when normalized values of migration time, peak area and peak height of FL and FITC were used instead of actual measured parameters PMID:17477932

Silicon Nitride Deposition for Flexible Organic Electronic Devices by VHF (162 MHz)-PECVD Using a Multi-Tile Push-Pull Plasma Source.

PubMed

Kim, Ki Seok; Kim, Ki Hyun; Ji, You Jin; Park, Jin Woo; Shin, Jae Hee; Ellingboe, Albert Rogers; Yeom, Geun Young

2017-10-19

Depositing a barrier film for moisture protection without damage at a low temperature is one of the most important steps for organic-based electronic devices. In this study, the authors investigated depositing thin, high-quality SiN x film on organic-based electronic devices, specifically, very high-frequency (162 MHz) plasma-enhanced chemical vapor deposition (VHF-PECVD) using a multi-tile push-pull plasma source with a gas mixture of NH 3 /SiH 4 at a low temperature of 80 °C. The thin deposited SiN x film exhibited excellent properties in the stoichiometry, chemical bonding, stress, and step coverage. Thin film quality and plasma damage were investigated by the water vapor transmission rate (WVTR) and by electrical characteristics of organic light-emitting diode (OLED) devices deposited with SiN x , respectively. The thin deposited SiN x film exhibited a low WVTR of 4.39 × 10 -4  g (m 2 · day) -1 for a single thin (430 nm thick) film SiN x and the electrical characteristics of OLED devices before and after the thin SiN x film deposition on the devices did not change, which indicated no electrical damage during the deposition of SiN x on the OLED device.

An approach to quality and security of supply for single-use bioreactors.

PubMed

Barbaroux, Magali; Gerighausen, Susanne; Hackel, Heiko

2014-01-01

Single-use systems (also referred to as disposables) have become a huge part of the bioprocessing industry, which raised concern in the industry regarding quality and security of supply. Processes must be in place to assure the supply and control of outsourced activities and quality of purchased materials along the product life cycle. Quality and security of supply for single-use bioreactors (SUBs) are based on a multidisciplinary approach. Developing a state-of-the-art SUB-system based on quality by design (QbD) principles requires broad expertise and know-how including the cell culture application, polymer chemistry, regulatory requirements, and a deep understanding of the biopharmaceutical industry. Using standardized products reduces the complexity and strengthens the robustness of the supply chain. Well-established supplier relations including risk mitigation strategies are the basis for achieving long-term security of supply. Well-developed quality systems including change control approaches aligned with the requirements of the biopharmaceutical industry are a key factor in supporting long-term product availability. This chapter outlines the approach to security of supply for key materials used in single-use production processes for biopharmaceuticals from a supplier perspective.

Teacher’s sleep quality: linked to social job characteristics?

PubMed Central

KOTTWITZ, Maria U.; GERHARDT, Christin; PEREIRA, Diana; ISELI, Lionel; ELFERING, Achim

2017-01-01

Besides dealing with high workload, being a teacher is challenging with respect to the social context. There is increasing evidence that adverse social job characteristics challenge sleep quality. The current study tests whether restraint sleep quality (defined as worse sleep quality before than during vacation) is related to time-related job stressors, job resources, and social job characteristics. Forty-eight elementary school teachers (42% women) participated both during the last week before and the first week after vacation. Before vacation, teachers were asked for demographics and working conditions with reference to the last 30 d, and sleep quality with reference to the last 7 d. After vacation sleep quality during vacation was assessed and used as reference for working time sleep quality. Results showed mean levels of sleep quality increased during vacation. In teachers with restrained working time sleep quality (38%), experiences of failure at work, social exclusion, and emotional dissonance were more frequent than in teachers with unrestrained working time sleep quality (Ps<0.05). Groups did not differ in time-related stressors, time control and social support from supervisors. Emotion work, social exclusion and individual experience of failure seem to challenge sleep quality in teachers. PMID:28804097

Teacher's sleep quality: linked to social job characteristics?

PubMed

Kottwitz, Maria U; Gerhardt, Christin; Pereira, Diana; Iseli, Lionel; Elfering, Achim

2018-02-07

Besides dealing with high workload, being a teacher is challenging with respect to the social context. There is increasing evidence that adverse social job characteristics challenge sleep quality. The current study tests whether restraint sleep quality (defined as worse sleep quality before than during vacation) is related to time-related job stressors, job resources, and social job characteristics. Forty-eight elementary school teachers (42% women) participated both during the last week before and the first week after vacation. Before vacation, teachers were asked for demographics and working conditions with reference to the last 30 d, and sleep quality with reference to the last 7 d. After vacation sleep quality during vacation was assessed and used as reference for working time sleep quality. Results showed mean levels of sleep quality increased during vacation. In teachers with restrained working time sleep quality (38%), experiences of failure at work, social exclusion, and emotional dissonance were more frequent than in teachers with unrestrained working time sleep quality (Ps<0.05). Groups did not differ in time-related stressors, time control and social support from supervisors. Emotion work, social exclusion and individual experience of failure seem to challenge sleep quality in teachers.

Single-mode hole-assisted fiber as a bending-loss insensitive fiber

NASA Astrophysics Data System (ADS)

Nakajima, Kazuhide; Shimizu, Tomoya; Matsui, Takashi; Fukai, Chisato; Kurashima, Toshio

2010-12-01

We investigate the design and characteristics of a single-mode and low bending loss HAF both numerically and experimentally. An air filling fraction S is introduced to enable us to design a HAF with desired characteristics more easily. We show that we can expect to realize a single-mode and low bending loss HAF by considering the S dependence of the bending loss α b and cutoff wavelength λ c as well as their relative index difference Δ dependence. We also show that the mode-field diameter (MFD) and chromatic dispersion characteristics of the single-mode and low bending loss HAF can be tailored by optimizing the distance between the core and the air holes. We also investigate the usefulness of the fabricated HAFs taking the directly modulated transmission and multipath interference (MPI) characteristics into consideration. We show that the designed HAF has sufficient applicability to both analog and digital transmission systems. Our results reveal that the single-mode and low bending loss HAF is beneficial in terms of developing a future fiber to the home (FTTH) network as well as for realizing flexible optical wiring.

Variable feeding behavior in Orchestoidea tuberculata (Nicolet 1849): Exploring the relative importance of macroalgal traits

NASA Astrophysics Data System (ADS)

Duarte, Cristian; Acuña, Karin; Navarro, Jorge M.; Gómez, Iván; Jaramillo, Eduardo; Quijón, Pedro

2014-03-01

The feeding behavior of algal consumers inhabiting sandy beaches and the consequences of this behavior on their performance are poorly understood. Food quality has been shown to influence the food preference of algal consumers. However, food preference can often be altered or subordinated to habitat choice. This study analyzes the feeding behavior (preference and consumption rate), absorption efficiency and growth rates of the talitrid amphipod Orchestoidea tuberculata (Nicolet, 1849) in relation to the nutritional characteristics of two of the most common macroalgae stranded in the Chilean north-central region. Our experiments show that these amphipods prefer Macrocystis integrifolia over Lessonia nigrescens when presented with fresh fragments of both algae simultaneously. However, this preference did not match the performance of the amphipods when reared on diets of a single algal species: in that growth rates were not different. These results suggest that M. integrifolia is not a superior food item compared to L. nigrescens. The lower content of proteins and total organic matter found in M. integrifolia supports this interpretation. The preference of the amphipods for L. nigrescens over M. integrifolia when dry powdered algae of each species were provided (artificial food), suggested that some aspect of the physical structure of these two algae determined food preference. When the amphipods were maintained with each of the algal species in no choice experiments, they consumed 2 times more M. integrifolia, but showed higher absorption efficiency on L. nigrescens. These results suggest that food quantity and not absorption efficiency was used to compensate for the lower nutritional quality of M. integrifolia. The feeding behavior documented in this study differs significantly from that observed in populations of the same species inhabiting southern Chile, cautioning against generalizing results obtained even within a single species. Our results suggest that physical features rather than chemical characteristics of the food drive feeding preferences, including the potential (indirect) roles played by the fronds of these seaweeds as refuges against competition and desiccation.

Correlation of the Characteristics of Single-Cylinder and Flight Engines in Tests of High-Performance Fuels in an Air-Cooled Engine I : Cooling Characteristics

NASA Technical Reports Server (NTRS)

Wilson, Robert W.; Richard, Paul H.; Brown, Kenneth D.

1945-01-01

Variable charge-air flow, cooling-air pressure drop, and fuel-air ration investigations were conducted to determine the cooling characteristics of a full-scale air-cooled single cylinder on a CUE setup. The data are compared with similar data that were available for the same model multicylinder engine tested in flight in a four-engine airplane. The cylinder-head cooling correlations were the same for both the single-cylinder and the flight engine. The cooling correlations for the barrels differed slightly in that the barrel of the single-cylinder engine runs cooler than the barrel of te flight engine for the same head temperatures and engine conditions.

Work life and mental wellbeing of single and non-single working mothers in Scandinavia.

PubMed

Bull, Torill; Mittelmark, Maurice B

2009-08-01

This study examined levels and predictors of mental wellbeing in Scandinavian working single and non-single mothers, with a special focus on financial stress, job characteristics and work-family conflict. The European Social Survey Round 2 (2005) provided questionnaire data from 73 single and 432 non-single working mothers in Denmark, Sweden and Norway. Respondents answered questions about the outcome variables life satisfaction, happiness, and positive affect, and predictor variables financial stress, job characteristics, work-family conflict, and social support. Hierarchical multiple regression was used to assess the relationships between predictor variables and mental wellbeing outcomes. Single working mothers scored significantly lower on life satisfaction and happiness, but not on positive affect, than did non-single mothers. Financial stress was higher in the single mother group. There were no significant differences in levels of enriching or stressful job characteristics, or in levels of social support. While financial stress and work-family conflict were important predictors in both groups, the relationship between financial stress and wellbeing was far stronger in the single mother group. Confidant support was a significant predictor only in the single mother group, and social participation only in the non-single mothers group. This study suggests that the Scandinavian welfare democracies have not yet been successful in relieving the financial pressure experienced by single working mothers. Development of efficient financial support systems should be prioritized. Ways to reduce work-family conflict in both single and non-single mothers in Scandinavia should also be given increased attention.

Characteristics of iron corrosion scales and water quality variations in drinking water distribution systems of different pipe materials.

PubMed

Li, Manjie; Liu, Zhaowei; Chen, Yongcan; Hai, Yang

2016-12-01

Interaction between old, corroded iron pipe surfaces and bulk water is crucial to the water quality protection in drinking water distribution systems (WDS). Iron released from corrosion products will deteriorate water quality and lead to red water. This study attempted to understand the effects of pipe materials on corrosion scale characteristics and water quality variations in WDS. A more than 20-year-old hybrid pipe section assembled of unlined cast iron pipe (UCIP) and galvanized iron pipe (GIP) was selected to investigate physico-chemical characteristics of corrosion scales and their effects on water quality variations. Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectroscopy (EDS), Inductively Coupled Plasma (ICP) and X-ray Diffraction (XRD) were used to analyze micromorphology and chemical composition of corrosion scales. In bench testing, water quality parameters, such as pH, dissolved oxygen (DO), oxidation reduction potential (ORP), alkalinity, conductivity, turbidity, color, Fe 2+ , Fe 3+ and Zn 2+ , were determined. Scale analysis and bench-scale testing results demonstrated a significant effect of pipe materials on scale characteristics and thereby water quality variations in WDS. Characteristics of corrosion scales sampled from different pipe segments show obvious differences, both in physical and chemical aspects. Corrosion scales were found highly amorphous. Thanks to the protection of zinc coatings, GIP system was identified as the best water quality stability, in spite of high zinc release potential. It is deduced that the complicated composition of corrosion scales and structural break by the weld result in the diminished water quality stability in HP system. Measurement results showed that iron is released mainly in ferric particulate form. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of Individual Nurse and Hospital Characteristics on Patient Adverse Events and Quality of Care: A Multilevel Analysis.

PubMed

Lee, Seung Eun; Vincent, Catherine; Dahinten, V Susan; Scott, Linda D; Park, Chang Gi; Dunn Lopez, Karen

2018-06-14

This study aimed to investigate effects of individual nurse and hospital characteristics on patient adverse events and quality of care using a multilevel approach. This is a secondary analysis of a combination of nurse survey data (N = 1,053 nurses) and facility data (N = 63 hospitals) in Canada. Multilevel ordinal logistic regression was employed to examine effects of individual nurse and hospital characteristics on patient adverse events. Multilevel linear regressions were used to investigate effects of individual nurse and hospital characteristics on quality of care. Organizational safety culture was associated with patient adverse events and quality of care. Controlling for effects of nurse and hospital characteristics, nurses in hospitals with a stronger safety culture were 64% less likely to report administration of wrong medication, time, or dose; 58% less likely to report patient falls with injury; and 60% less likely to report urinary tract infections; and were more likely to report higher levels of quality of care. Additionally, the effects of individual-level baccalaureate education and years of experience on quality of care differed across hospitals, and hospital-level nurse education interacted with individual-level baccalaureate education. This study makes significant contributions to existing knowledge regarding the positive effect of organizational safety culture on patient adverse events and quality of care. Healthcare organizations should strive to improve their safety culture by creating environments where healthcare providers trust each other, work collaboratively, and share accountability for patient safety and care quality. © 2018 Sigma Theta Tau International.

Effects of sample treatments on genome recovery via single-cell genomics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clingenpeel, Scott; Schwientek, Patrick; Hugenholtz, Philip

2014-06-13

It is known that single-cell genomics is a powerful tool for accessing genetic information from uncultivated microorganisms. Methods of handling samples before single-cell genomic amplification may affect the quality of the genomes obtained. Using three bacterial strains we demonstrate that, compared to cryopreservation, lower-quality single-cell genomes are recovered when the sample is preserved in ethanol or if the sample undergoes fluorescence in situ hybridization, while sample preservation in paraformaldehyde renders it completely unsuitable for sequencing.

Protecting water quality in the watershed

DOE Office of Scientific and Technical Information (OSTI.GOV)

James, C.R.; Johnson, K.E.; Stewart, E.H.

1994-08-01

This article highlights the water quality component of a watershed management plan being developed for the San Francisco (CA) Water Department. The physical characteristics of the 63,000-acre watersheds were analyzed for source and transport vulnerability for five groups of water quality parameters--particulates, THM precursors, microorganisms (Giardia and cryptosporidium), nutrients (nitrogen and phosphorus), and synthetic organic chemicals--and vulnerability zones were mapped. Mapping was achieved through the use of an extensive geographic information system (GIS) database. Each water quality vulnerability zone map was developed based on five watershed physical characteristics--soils, slope, vegetation, wildlife concentration, and proximity to water bodies--and their relationships tomore » each of the five groups of water quality parameters. An approach to incorporate the watershed physical characteristics information into the five water quality vulnerability zone maps was defined and verified. The composite approach was based in part on information gathered from existing watershed management plans.« less

Relationship between solvent retention capacity and protein molecular weight distribution, quality characteristics, and breadmaking functionality of hard red spring wheat flour

USDA-ARS?s Scientific Manuscript database

In order to investigate suitability of solvent retention capacity (SRC) test for quality assessment of hard red spring (HRS) wheat flour, ten HRS genotypes from six locations in North Dakota State were analyzed for SRC and flour and breadmaking quality characteristics. The SRC values were significa...

The Impact of Professional Development and Student and Teacher Characteristics on the Quality of Postsecondary Goals

ERIC Educational Resources Information Center

Doren, Bonnie; Flannery, K. Brigid; Lombardi, Allison R.; Kato, Mimi McGrath

2013-01-01

This study examined (a) the main effects of professional development on the quality of postsecondary goals in employment and postsecondary education/training, (b) the main effects of student and teacher characteristics on goal quality, and (c) whether professional development moderated the relationship between the impact of these characteristics…

Quality Development in Higher Education to Meet the Future Needs of Arkansas. Report of the Quality Higher Education Study Committee.

ERIC Educational Resources Information Center

Arkansas State Dept. of Higher Education, Little Rock.

A report of the Quality Higher Education Study Committee on state-supported institutions in Arkansas is presented, including 43 recommendations. Attention is directed to: economic characteristics in the state (business indicators, population and growth, personal and family income); social characteristics in the state (education levels, illiteracy,…

Predicting the optimal process window for the coating of single-crystalline organic films with mobilities exceeding 7 cm2/Vs.

NASA Astrophysics Data System (ADS)

Janneck, Robby; Vercesi, Federico; Heremans, Paul; Genoe, Jan; Rolin, Cedric

2016-09-01

Organic thin film transistors (OTFTs) based on single crystalline thin films of organic semiconductors have seen considerable development in the recent years. The most successful method for the fabrication of single crystalline films are solution-based meniscus guided coating techniques such as dip-coating, solution shearing or zone casting. These upscalable methods enable rapid and efficient film formation without additional processing steps. The single-crystalline film quality is strongly dependent on solvent choice, substrate temperature and coating speed. So far, however, process optimization has been conducted by trial and error methods, involving, for example, the variation of coating speeds over several orders of magnitude. Through a systematic study of solvent phase change dynamics in the meniscus region, we develop a theoretical framework that links the optimal coating speed to the solvent choice and the substrate temperature. In this way, we can accurately predict an optimal processing window, enabling fast process optimization. Our approach is verified through systematic OTFT fabrication based on films grown with different semiconductors, solvents and substrate temperatures. The use of best predicted coating speeds delivers state of the art devices. In the case of C8BTBT, OTFTs show well-behaved characteristics with mobilities up to 7 cm2/Vs and onset voltages close to 0 V. Our approach also explains well optimal recipes published in the literature. This route considerably accelerates parameter screening for all meniscus guided coating techniques and unveils the physics of single crystalline film formation.

Epitaxial growth of single-orientation high-quality MoS2 monolayers

NASA Astrophysics Data System (ADS)

Bana, Harsh; Travaglia, Elisabetta; Bignardi, Luca; Lacovig, Paolo; Sanders, Charlotte E.; Dendzik, Maciej; Michiardi, Matteo; Bianchi, Marco; Lizzit, Daniel; Presel, Francesco; De Angelis, Dario; Apostol, Nicoleta; Das, Pranab Kumar; Fujii, Jun; Vobornik, Ivana; Larciprete, Rosanna; Baraldi, Alessandro; Hofmann, Philip; Lizzit, Silvano

2018-07-01

We present a study on the growth and characterization of high-quality single-layer MoS2 with a single orientation, i.e. without the presence of mirror domains. This single orientation of the MoS2 layer is established by means of x-ray photoelectron diffraction. The high quality is evidenced by combining scanning tunneling microscopy with x-ray photoelectron spectroscopy measurements. Spin- and angle-resolved photoemission experiments performed on the sample revealed complete spin-polarization of the valence band states near the K and -K points of the Brillouin zone. These findings open up the possibility to exploit the spin and valley degrees of freedom for encoding and processing information in devices that are based on epitaxially grown materials.

Differences in physical aging measured by walking speed: evidence from the English Longitudinal Study of Ageing.

PubMed

Weber, Daniela

2016-01-28

Physical functioning and mobility of older populations are of increasing interest when populations are aging. Lower body functioning such as walking is a fundamental part of many actions in daily life. Limitations in mobility threaten independent living as well as quality of life in old age. In this study we examine differences in physical aging and convert those differences into the everyday measure of single years of age. We use the English Longitudinal Study of Ageing, which was collected biennially between 2002 and 2012. Data on physical performance, health as well as information on economics and demographics of participants were collected. Lower body performance was assessed with two timed walks at normal pace each of 8 ft (2.4 m) of survey participants aged at least 60 years. We employed growth curve models to study differences in physical aging and followed the characteristic-based age approach to illustrate those differences in single years of age. First, we examined walking speed of about 11,700 English individuals, and identified differences in aging trajectories by sex and other characteristics (e.g. education, occupation, regional wealth). Interestingly, higher educated and non-manual workers outperformed their counterparts for both men and women. Moreover, we transformed the differences between subpopulations into single years of age to demonstrate the magnitude of those gaps, which appear particularly high at early older ages. This paper expands research on aging and physical performance. In conclusion, higher education provides an advantage in walking of up to 15 years for men and 10 years for women. Thus, enhancements in higher education have the potential to ensure better mobility and independent living in old age for a longer period.

Schottky barrier diode based on β-Ga2O3 (100) single crystal substrate and its temperature-dependent electrical characteristics

NASA Astrophysics Data System (ADS)

He, Qiming; Mu, Wenxiang; Dong, Hang; Long, Shibing; Jia, Zhitai; Lv, Hangbing; Liu, Qi; Tang, Minghua; Tao, Xutang; Liu, Ming

2017-02-01

The Pt/β-Ga2O3 Schottky barrier diode and its temperature-dependent current-voltage characteristics were investigated for power device application. The edge-defined film-fed growth (EFG) technique was utilized to grow the (100)-oriented β-Ga2O3 single crystal substrate that shows good crystal quality characterized by X-ray diffraction and high resolution transmission electron microscope. Ohmic and Schottky electrodes were fabricated by depositing Ti and Pt metals on the two surfaces, respectively. Through the current-voltage (I-V) measurement under different temperature and the thermionic emission modeling, the fabricated Pt/β-Ga2O3 Schottky diode was found to show good performances at room temperature, including rectification ratio of 1010, ideality factor (n) of 1.1, Schottky barrier height (ΦB) of 1.39 eV, threshold voltage (Vbi) of 1.07 V, ON-resistance (RON) of 12.5 mΩ.cm2, forward current density at 2 V (J@2V) of 56 A/cm2, and saturation current density (J0) of 2 × 10-16 A/cm2. The effective donor concentration Nd - Na was calculated to be about 2.3 × 1014 cm3. Good temperature dependent performance was also found in the device. The Schottky barrier height was estimated to be about 1.3 eV-1.39 eV at temperatures ranging from room temperature to 150 °C. With increasing temperature, parameters such as RON and J@2V become better, proving that the diode can work well at high temperature. The EFG grown β-Ga2O3 single crystal is a promising material to be used in the power devices.

Characteristics of primary care practices associated with high quality of care

PubMed Central

Beaulieu, Marie-Dominique; Haggerty, Jeannie; Tousignant, Pierre; Barnsley, Janet; Hogg, William; Geneau, Robert; Hudon, Éveline; Duplain, Réjean; Denis, Jean-Louis; Bonin, Lucie; Del Grande, Claudio; Dragieva, Natalyia

2013-01-01

Background: No primary practice care model has been shown to be superior in achieving high-quality primary care. We aimed to identify the organizational characteristics of primary care practices that provide high-quality primary care. Methods: We performed a cross-sectional observational study involving a stratified random sample of 37 primary care practices from 3 regions of Quebec. We recruited 1457 patients who had 1 of 2 chronic care conditions or 1 of 6 episodic care conditions. The main outcome was the overall technical quality score. We measured organizational characteristics by use of a validated questionnaire and the Team Climate Inventory. Statistical analyses were based on multilevel regression modelling. Results: The following characteristics were strongly associated with overall technical quality of care score: physician remuneration method (27.0; 95% confidence interval [CI] 19.0–35.0), extent of sharing of administrative resources (7.6; 95% CI 0.8–14.4), presence of allied health professionals (15.3; 95% CI 5.4–25.2) and/or specialist physicians (19.6; 95% CI 8.3–30.9), the presence of mechanisms for maintaining or evaluating competence (7.7; 95% CI 3.0–12.4) and average organizational access to the practice (4.9; 95% CI 2.6–7.2). The number of physicians (1.2; 95% CI 0.6–1.8) and the average Team Climate Inventory score (1.3; 95% CI 0.1–2.5) were modestly associated with high-quality care. Interpretation: We identified a common set of organizational characteristics associated with high-quality primary care. Many of these characteristics are amenable to change through practice-level organizational changes. PMID:23877669

Molecular allergy diagnostics using multiplex assays: methodological and practical considerations for use in research and clinical routine: Part 21 of the Series Molecular Allergology.

PubMed

Jakob, Thilo; Forstenlechner, Peter; Matricardi, Paolo; Kleine-Tebbe, Jörg

The availability of single allergens and their use in microarray technology enables the simultaneous determination of specific IgE (sIgE) to a multitude of different allergens (> 100) in a multiplex procedure requiring only minute amounts of serum. This allows extensive individual sensitization profiles to be determined from a single analysis. Combined with a patient's medical history, these profiles simplify identification of cross-reactivity; permit a more accurate estimation of the risk of severe reactions; and enable the indication for specific immunotherapy to be more precisely established, particularly in cases of polysensitization. Strictly speaking, a multiplex assay is not a single test, but instead more than 100 simultaneous tests. This places considerable demands on the production, quality assurance, and interpretation of data. The following chapter describes the multiplex test systems currently available and discusses their characteristics. Performance data are presented and the sIgE values obtained from multiplex and singleplex assays are compared. Finally, the advantages and limitations of molecular allergy diagnostics using multiplex assays in clinical routine are discussed, and innovative possibilities for clinical research are described. The multiplex diagnostic tests available for clinical routine have now become well established. The interpretation of test results is demanding, particularly since all individual results need to be checked for their plausibility and clinical relevance on the basis of previous history (patient history, clinical symptoms, challenge test results). There is still room for improvement in certain areas, for example with respect to the overall test sensitivity of the method, as well as the availability and quality of particular allergens. The current test systems are just the beginning of a continuous development that will influence and most likely change clinical allergology in the coming years.

PAX1 Methylation Hallmarks Promising Accuracy for Cervical Cancer Screening in Asians: Results from a Meta-Analysis.

PubMed

Kong, Ling-Ying; Du, Wei; Wang, Li; Yang, Zhi; Zhang, Hong-Sheng

2015-01-01

DNA methylation has been proposed as a potential biomarker for cervical cancer detection. This study aimed to evaluate the diagnostic role of paired boxed gene 1 (PAX1) methylation for cervical cancer screening in Asians. Eligible studies were retrieved by searching the electronic databases, and the quality of the enrolled studies was assessed via the quality assessment for studies of diagnostic accuracy (QUADAS) tool. The bivariate meta-analysis model was employed to generate the summary receiver operator characteristic (SROC) curve using Stata 12.0 software. Cochran's Q test and I2 statistics were applied to assess heterogeneity among studies. Publication bias was evaluated by the Deeks' funnel plot asymmetry test. A total of 9 articles containing 15 individual studies were included. The SROC analysis showed that single PAX1 methylation allowed for the discrimination between cancer/high-grade squamous intraepithelial lesion (HSIL) patients and normal individuals with a sensitivity (95% confidence interval) of 0.80 (0.70 - 0.87) and specificity of 0.89 (0.86 - 0.92), corresponding to an area under curve (AUC) of 0.92. Notably, our subgroup analysis suggested that combing parallel testing of PAX1 methylation and HPV DNA (AUC, sensitivity, and specificity of 0.90, 0.82, and 0.84, respectively) seemed to harbor higher accuracy than single HPV DNA testing (AUC, sensitivity, and specificity of 0.81, 0.86, and 0.67, respectively). PAX1 methylation hallmarks a potential diagnostic value for cervical cancer screening in Asians, and parallel testing of PAX1 methylation and HPV in cervical scrapings confers an improved accuracy than single HPV DNA testing.

Primary packaging considerations in developing medicines for children: oral liquid and powder for constitution.

PubMed

Campbell, Gossett A; Vallejo, Erick

2015-01-01

The packaging presentation of oral liquid pediatric medicines is a critical step in maintaining chemical and physical stability, compliance, adherence, and proper handling by the target patient population, guardians, caregivers, and health-care professionals. The common packaging presentations for commercial oral liquid pediatric drug products are glass bottle, plastic bottle, sachet, and stick pack configurations. The type of pack presentation selected is driven by the quality target product profile (QTPP) that is designed around the physicochemical properties of the drug substance and the desired drug product suitability for the target population. The QTPP defines the intended use of the drug product, drug product quality criteria, dose strength, dosage form, container closure system, storage conditions, stability criteria, dosing device, shelf life, and attributes affecting the pharmacokinetic characteristics. Oral liquid pediatric formulations are typically prepared from a powder that is constituted at the time of use as a suspension or a solution for single or multiple use depending on the stability of the constituted formulation. Active ingredients with high aqueous solubility can be developed as a powder for oral solution and presented in a bottle for multiple use product and a stick pack, packet, or sachet for single-use product. Active ingredients with low aqueous solubility can be developed as a powder for oral suspension and presented in a bottle for multiple use product and a stick pack or sachet for single-use product. A secondary package may be used in cases where the primary pack failed to provide adequate protection against light degradation. This work will help formulation scientists select the most appropriate pack presentation in the early stages of pediatric clinical development. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Variation in general practitioners' information-seeking behaviour - a cross-sectional study on the influence of gender, age and practice form.

PubMed

Le, Jette V; Pedersen, Line B; Riisgaard, Helle; Lykkegaard, Jesper; Nexøe, Jørgen; Lemmergaard, Jeanette; Søndergaard, Jens

2016-12-01

To assess general practitioners' (GPs') information-seeking behaviour and perceived importance of sources of scientific medical information and to investigate associations with GP characteristics. A national cross-sectional survey was distributed electronically in December 2013. Danish general practice. A population of 3440 GPs (corresponding to approximately 96% of all Danish GPs). GPs' use and perceived importance of information sources. Multilevel mixed-effects logit models were used to investigate associations with GP characteristics after adjusting for relevant covariates. A total of 1580 GPs (46.4%) responded to the questionnaire. GPs' information-seeking behaviour is associated with gender, age and practice form. Single-handed GPs use their colleagues as an information source significantly less than GPs working in partnership practices and they do not use other sources more frequently. Compared with their younger colleagues, GPs aged above 44 years are less likely to seek information from colleagues, guidelines and websites, but more likely to seek information from medical journals. Male and female GPs seek information equally frequently. However, whereas male GPs are more likely than female GPs to find that pharmaceutical sales representative and non-refundable CME meetings are important, they are less likely to find that colleagues, refundable CME meetings, guidelines and websites are important. Results from this study indicate that GP characteristics should be taken into consideration when disseminating scientific medical information, to ensure that patients receive medically updated, high-quality care. KEY POINTS Research indicates that information-seeking behaviour is associated with GP characteristics. Further insights could provide opportunities for targeting information dissemination strategies. Single-handed GPs seek information from colleagues less frequently than GPs in partnerships and do not use other sources more frequently. GPs aged above 44 years do not seek information as frequently as their younger colleagues and prefer other information sources. Male and female GPs seek information equally frequently, but do not consider information sources equally important in keeping medically updated.

Retrospective analysis of the quality of reports by author-suggested and non-author-suggested reviewers in journals operating on open or single-blind peer review models.

PubMed

Kowalczuk, Maria K; Dudbridge, Frank; Nanda, Shreeya; Harriman, Stephanie L; Patel, Jigisha; Moylan, Elizabeth C

2015-09-29

To assess whether reports from reviewers recommended by authors show a bias in quality and recommendation for editorial decision, compared with reviewers suggested by other parties, and whether reviewer reports for journals operating on open or single-blind peer review models differ with regard to report quality and reviewer recommendations. Retrospective analysis of the quality of reviewer reports using an established Review Quality Instrument, and analysis of reviewer recommendations and author satisfaction surveys. BioMed Central biology and medical journals. BMC Infectious Diseases and BMC Microbiology are similar in size, rejection rates, impact factors and editorial processes, but the former uses open peer review while the latter uses single-blind peer review. The Journal of Inflammation has operated under both peer review models. Two hundred reviewer reports submitted to BMC Infectious Diseases, 200 reviewer reports submitted to BMC Microbiology and 400 reviewer reports submitted to the Journal of Inflammation. For each journal, author-suggested reviewers provided reports of comparable quality to non-author-suggested reviewers, but were significantly more likely to recommend acceptance, irrespective of the peer review model (p<0.0001 for BMC Infectious Diseases, BMC Microbiology and the Journal of Inflammation). For BMC Infectious Diseases, the overall quality of reviewer reports measured by the Review Quality Instrument was 5% higher than for BMC Microbiology (p=0.042). For the Journal of Inflammation, the quality of reports was the same irrespective of the peer review model used. Reviewers suggested by authors provide reports of comparable quality to non-author-suggested reviewers, but are significantly more likely to recommend acceptance. Open peer review reports for BMC Infectious Diseases were of higher quality than single-blind reports for BMC Microbiology. There was no difference in quality of peer review in the Journal of Inflammation under open peer review compared with single blind. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

SMOQ: a tool for predicting the absolute residue-specific quality of a single protein model with support vector machines

PubMed Central

2014-01-01

Background It is important to predict the quality of a protein structural model before its native structure is known. The method that can predict the absolute local quality of individual residues in a single protein model is rare, yet particularly needed for using, ranking and refining protein models. Results We developed a machine learning tool (SMOQ) that can predict the distance deviation of each residue in a single protein model. SMOQ uses support vector machines (SVM) with protein sequence and structural features (i.e. basic feature set), including amino acid sequence, secondary structures, solvent accessibilities, and residue-residue contacts to make predictions. We also trained a SVM model with two new additional features (profiles and SOV scores) on 20 CASP8 targets and found that including them can only improve the performance when real deviations between native and model are higher than 5Å. The SMOQ tool finally released uses the basic feature set trained on 85 CASP8 targets. Moreover, SMOQ implemented a way to convert predicted local quality scores into a global quality score. SMOQ was tested on the 84 CASP9 single-domain targets. The average difference between the residue-specific distance deviation predicted by our method and the actual distance deviation on the test data is 2.637Å. The global quality prediction accuracy of the tool is comparable to other good tools on the same benchmark. Conclusion SMOQ is a useful tool for protein single model quality assessment. Its source code and executable are available at: http://sysbio.rnet.missouri.edu/multicom_toolbox/. PMID:24776231

SMOQ: a tool for predicting the absolute residue-specific quality of a single protein model with support vector machines.

PubMed

Cao, Renzhi; Wang, Zheng; Wang, Yiheng; Cheng, Jianlin

2014-04-28

It is important to predict the quality of a protein structural model before its native structure is known. The method that can predict the absolute local quality of individual residues in a single protein model is rare, yet particularly needed for using, ranking and refining protein models. We developed a machine learning tool (SMOQ) that can predict the distance deviation of each residue in a single protein model. SMOQ uses support vector machines (SVM) with protein sequence and structural features (i.e. basic feature set), including amino acid sequence, secondary structures, solvent accessibilities, and residue-residue contacts to make predictions. We also trained a SVM model with two new additional features (profiles and SOV scores) on 20 CASP8 targets and found that including them can only improve the performance when real deviations between native and model are higher than 5Å. The SMOQ tool finally released uses the basic feature set trained on 85 CASP8 targets. Moreover, SMOQ implemented a way to convert predicted local quality scores into a global quality score. SMOQ was tested on the 84 CASP9 single-domain targets. The average difference between the residue-specific distance deviation predicted by our method and the actual distance deviation on the test data is 2.637Å. The global quality prediction accuracy of the tool is comparable to other good tools on the same benchmark. SMOQ is a useful tool for protein single model quality assessment. Its source code and executable are available at: http://sysbio.rnet.missouri.edu/multicom_toolbox/.

A Comparative Study of Identity Styles, Quality of Life and Behavioral Problems between Single Parent and Two Parent Adolescents

ERIC Educational Resources Information Center

Abedini, Zoleykha; Mirnasab, Mirmahmoud; Fathi Azar, Eskander

2017-01-01

The present study aimed to investigate identity styles, quality of life and behavioral difficulties between adolescents with single and two-parent status. In this causal- comparative study, a total of 214 high school students were selected, then 112 single parent students (59 females and 53 males) were selected by the voluntary response sampling…

Modeling the relationship between landscape characteristics and water quality in a typical highly intensive agricultural small watershed, Dongting lake basin, south central China.

PubMed

Li, Hongqing; Liu, Liming; Ji, Xiang

2015-03-01

Understanding the relationship between landscape characteristics and water quality is critically important for estimating pollution potential and reducing pollution risk. Therefore, this study examines the relationship between landscape characteristics and water quality at both spatial and temporal scales. The study took place in the Jinjing River watershed in 2010; seven landscape types and four water quality pollutions were chosen as analysis parameters. Three different buffer areas along the river were drawn to analyze the relationship as a function of spatial scale. The results of a Pearson's correlation coefficient analysis suggest that "source" landscape, namely, tea gardens, residential areas, and paddy lands, have positive effects on water quality parameters, while forests exhibit a negative influence on water quality parameters because they represent a "sink" landscape and the sub-watershed level is identified as a suitable scale. Using the principal component analysis, tea gardens, residential areas, paddy lands, and forests were identified as the main landscape index. A stepwise multiple regression analysis was employed to model the relationship between landscape characteristics and water quality for each season. The results demonstrate that both landscape composition and configuration affect water quality. In summer and winter, the landscape metrics explained approximately 80.7 % of the variance in the water quality variables, which was higher than that for spring and fall (60.3 %). This study can help environmental managers to understand the relationships between landscapes and water quality and provide landscape ecological approaches for water quality control and land use management.

Perspective of surface active agents in baking industry: an overview.

PubMed

Ahmad, Asif; Arshad, Nazish; Ahmed, Zaheer; Bhatti, Muhammad Shahbaz; Zahoor, Tahir; Anjum, Nomana; Ahmad, Hajra; Afreen, Asma

2014-01-01

Different researchers have previously used surfactants for improving bread qualities and revealed that these compounds result in improving the quality of dough and bread by influencing dough strength, tolerance, uniform crumb cell size, and improve slicing characteristics and gas retention. The objective of this review is to highlight the areas where surfactants are most widely used particularly in the bread industries, their role and mechanism of interaction and their contribution to the quality characteristics of the dough and bread. This review reveals some aspects of surface-active agents regarding its role physiochemical properties of dough that in turn affect the bread characteristics by improving its sensory quality and storage stability.

A comparative review of measurement instruments to inform and evaluate effectiveness of disability inclusive development.

PubMed

Goujon, Nicolas; Devine, Alexandra; Baker, Sally M; Sprunt, Beth; Edmonds, Tanya J; Booth, Jennifer K; Keeffe, Jill E

2014-01-01

A review of existing measurement instruments was conducted to examine their suitability to measure disability prevalence and assess quality of life, protection of disability rights and community participation by people with disabilities, specifically within the context of development programs in low and middle-income countries. From a search of PubMed and the grey literature, potentially relevant measurement instruments were identified and examined for their content and psychometric properties, where possible. Criteria for inclusion were: based on the WHO's International Classification of Functioning Disability and Health (ICF), used quantitative methods, suitable for population-based studies of disability inclusive development in English and published after 1990. Characteristics of existing instruments were analysed according to components of the ICF and quality of life domains. Ten instruments were identified and reviewed according to the criteria listed above. Each version of instruments was analysed separately. Only three instruments included a component on quality of life. Domains from the ICF that were addressed by some but not all instruments included the environment, technology and communication. The measurement instruments reviewed covered the range of elements required to measure disability-inclusion within development contexts. However no single measurement instrument has the capacity to measure both disability prevalence and changes in quality of life according to contemporary disability paradigms. The review of measurement instruments supports the need for developing an instrument specifically intended to measure disability inclusive practice within development programs. Implications for Rehabilitation Surveys and tools are needed to plan disability inclusive development. Existing measurement tools to determine prevalence of disability, wellbeing, rights and access to the community were reviewed. No single validated tool exists for population-based studies, uses quantitative methods and the components of the ICF to measure prevalence of disability, well-being of people with disability and their access to their communities. A measurement tool that reflects the UNCRPD and addresses all components of the ICF is needed to assist in disability inclusive development, especially in low and mid resource countries.

Relationship between the practice of physical activity and quality of movement in adolescents: a screening tool using self-organizing maps.

PubMed

Herrero-Herrero, María; García-Massó, Xavier; Martínez-Corralo, Carlos; Prades-Piñón, Josep; Sanchis-Alfonso, Vicente

2017-09-01

The aim of this study was to determine whether the most physically active adolescents have better lower limb control. 31 high school students (12 males and 19 females) participated in this study. The Anterior Knee Pain Scale was used to find any cases of knee pain. Only subjects with high scores were selected, to exclude those with knee pain or lower limb injuries. Single Leg Squat and Tuck Jump Assessment were used to evaluate movements with two cameras in a two-dimensional assessment. The IPAQ Questionnaire was used to score the physical activity and to classify it into MET total, MET moderate activity, MET vigorous activity and MET walking. These scores were related to knee angle at landing, age and body mass index by self-organizing maps analysis. The subjects were classified into 4 clusters and the descriptive statistics of the different clusters were determined to find any differences. The subjects in cluster 3 were classified as those with the highest risk factors of suffering lower limb musculoskeletal disorders or knee pain, even though injuries do not only depend on quality of movement. Physical activity was not related to healthy movements during jump and single leg squat. Physical activity alone cannot be an indicator of good quality lower limb movement, as the knee valgus angle plays a determining role, as it could also depend on neuromuscular control and anatomical characteristics. The analytical method described in the study could be used by physical education teachers to detect potential risk factors for musculoskeletal problems in the lower limbs, especially in the knees.

Feedback on oral presentations during pediatric clerkships: a randomized controlled trial.

PubMed

Sox, Colin M; Dell, Michael; Phillipi, Carrie A; Cabral, Howard J; Vargas, Gabriela; Lewin, Linda O

2014-11-01

To measure the effects of participating in structured oral presentation evaluation sessions early in pediatric clerkships on students' subsequent presentations. We conducted a single-blind, 3-arm, cluster randomized controlled trial during pediatric clerkships at Boston University School of Medicine, University of Maryland School of Medicine, Oregon Health & Science University, and Case Western Reserve University School of Medicine. Blocks of students at each school were randomly assigned to experience either (1) no formal presentation feedback (control) or a small-group presentation feedback session early in pediatric clerkships in which students gave live presentations and received feedback from faculty who rated their presentations by using a (2) single-item (simple) or (3) 18-item (detailed) evaluation form. At the clerkship end, overall quality of subjects' presentations was rated by faculty blinded to randomization status, and subjects reported whether their presentations had improved. Analyses included multivariable linear and logistic regressions clustered on clerkship block that controlled for medical school. A total of 476 participants were evenly divided into the 3 arms, which had similar characteristics. Compared with controls, presentation quality was significantly associated with participating in detailed (coefficient: 0.38; 95% confidence interval [CI]: 0.07-0.69) but not simple (coefficient: 0.16; 95% CI: -0.12-0.43) feedback sessions. Similarly, student self-report of presentation improvement was significantly associated with participating in detailed (odds ratio: 2.16; 95% CI: 1.11-4.18] but not simple (odds ratio: 1.89; 95% CI: 0.91-3.93) feedback sessions. Small-group presentation feedback sessions led by faculty using a detailed evaluation form resulted in clerkship students delivering oral presentations of higher quality compared with controls. Copyright © 2014 by the American Academy of Pediatrics.

Single-electron random-number generator (RNG) for highly secure ubiquitous computing applications

NASA Astrophysics Data System (ADS)

Uchida, Ken; Tanamoto, Tetsufumi; Fujita, Shinobu

2007-11-01

Since the security of all modern cryptographic techniques relies on unpredictable and irreproducible digital keys generated by random-number generators (RNGs), the realization of high-quality RNG is essential for secure communications. In this report, a new RNG, which utilizes single-electron phenomena, is proposed. A room-temperature operating silicon single-electron transistor (SET) having nearby an electron pocket is used as a high-quality, ultra-small RNG. In the proposed RNG, stochastic single-electron capture/emission processes to/from the electron pocket are detected with high sensitivity by the SET, and result in giant random telegraphic signals (GRTS) on the SET current. It is experimentally demonstrated that the single-electron RNG generates extremely high-quality random digital sequences at room temperature, in spite of its simple configuration. Because of its small-size and low-power properties, the single-electron RNG is promising as a key nanoelectronic device for future ubiquitous computing systems with highly secure mobile communication capabilities.

3D T2-weighted imaging to shorten multiparametric prostate MRI protocols.

PubMed

Polanec, Stephan H; Lazar, Mathias; Wengert, Georg J; Bickel, Hubert; Spick, Claudio; Susani, Martin; Shariat, Shahrokh; Clauser, Paola; Baltzer, Pascal A T

2018-04-01

To determine whether 3D acquisitions provide equivalent image quality, lesion delineation quality and PI-RADS v2 performance compared to 2D acquisitions in T2-weighted imaging of the prostate at 3 T. This IRB-approved, prospective study included 150 consecutive patients (mean age 63.7 years, 35-84 years; mean PSA 7.2 ng/ml, 0.4-31.1 ng/ml). Two uroradiologists (R1, R2) independently rated image quality and lesion delineation quality using a five-point ordinal scale and assigned a PI-RADS score for 2D and 3D T2-weighted image data sets. Data were compared using visual grading characteristics (VGC) and receiver operating characteristics (ROC)/area under the curve (AUC) analysis. Image quality was similarly good to excellent for 2D T2w (mean score R1, 4.3 ± 0.81; R2, 4.7 ± 0.83) and 3D T2w (mean score R1, 4.3 ± 0.82; R2, 4.7 ± 0.69), p = 0.269. Lesion delineation was rated good to excellent for 2D (mean score R1, 4.16 ± 0.81; R2, 4.19 ± 0.92) and 3D T2w (R1, 4.19 ± 0.94; R2, 4.27 ± 0.94) without significant differences (p = 0.785). ROC analysis showed an equivalent performance for 2D (AUC 0.580-0.623) and 3D (AUC 0.576-0.629) T2w (p > 0.05, respectively). Three-dimensional acquisitions demonstrated equivalent image and lesion delineation quality, and PI-RADS v2 performance, compared to 2D in T2-weighted imaging of the prostate. Three-dimensional T2-weighted imaging could be used to considerably shorten prostate MRI protocols in clinical practice. • 3D shows equivalent image quality and lesion delineation compared to 2D T2w. • 3D T2w and 2D T2w image acquisition demonstrated comparable diagnostic performance. • Using a single 3D T2w acquisition may shorten the protocol by 40%. • Combined with short DCE, multiparametric protocols of 10 min are feasible.

Ultraclean single, double, and triple carbon nanotube quantum dots with recessed Re bottom gates

NASA Astrophysics Data System (ADS)

Jung, Minkyung; Schindele, Jens; Nau, Stefan; Weiss, Markus; Baumgartner, Andreas; Schoenenberger, Christian

2014-03-01

Ultraclean carbon nanotubes (CNTs) that are free from disorder provide a promising platform to manipulate single electron or hole spins for quantum information. Here, we demonstrate that ultraclean single, double, and triple quantum dots (QDs) can be formed reliably in a CNT by a straightforward fabrication technique. The QDs are electrostatically defined in the CNT by closely spaced metallic bottom gates deposited in trenches in Silicon dioxide by sputter deposition of Re. The carbon nanotubes are then grown by chemical vapor deposition (CVD) across the trenches and contacted using conventional electron beam lithography. The devices exhibit reproducibly the characteristics of ultraclean QDs behavior even after the subsequent electron beam lithography and chemical processing steps. We demonstrate the high quality using CNT devices with two narrow bottom gates and one global back gate. Tunable by the gate voltages, the device can be operated in four different regimes: i) fully p-type with ballistic transport between the outermost contacts (over a length of 700 nm), ii) clean n-type single QD behavior where a QD can be induced by either the left or the right bottom gate, iii) n-type double QD and iv) triple bipolar QD where the middle QD has opposite doping (p-type). Research at Basel is supported by the NCCR-Nano, NCCR-QIST, ERC project QUEST, and FP7 project SE2ND.

Synthesis, growth, structure, mechanical and optical properties of a new semi-organic 2-methyl imidazolium dihydrogen phosphate single crystal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nagapandiselvi, P., E-mail: nagapandiselvip@ssn.edu.in; Baby, C.; Gopalakrishnan, R.

2016-09-15

Highlights: • 2MIDP crystals were grown by slow evaporation solution growth technique. • Single crystal XRD revealed self-assembled supramolecular framework. • Z scan technique is employed for third order nonlinear optical susceptibility. • Structure-property correlation is established. - Abstract: A new semi-organic compound, 2-methyl imidazolium dihydrogen phosphate (2MIDP), was prepared and good quality single crystals of 2MIDP were grown by slow evaporation solution growth technique. Crystal structure elucidated using Single crystal XRD showed that 2MIDP crystallizes in monoclinic system with P2{sub 1}/c space group. FT-IR, UV-Vis-NIR, Fluorescence and FT-NMR spectra confirm the molecular structure of 2MIDP. The UV-Vis-NIR spectra establishedmore » the suitability of the compound for NLO applications. TG-DSC showed that 2MIDP is thermally stable up to 200 °C. Mechanical characteristics like hardness number (H{sub v}), stiffness constant (C{sub 11}), yield strength (σ{sub v}), fracture toughness (K{sub c}) and brittleness index (B{sub i}) were assessed using Vicker’s microhardness tester. Third order nonlinear optical properties determined from Z-scan measurement using femto and picosecond lasers showed two photon reverse saturable absorption. The enhancement of nonlinear optical properties in femto second laser, revealed the suitability of 2MIDP for optical limiting applications.« less

Patterns and multi-scale drivers of phytoplankton species richness in temperate peri-urban lakes.

PubMed

Catherine, Arnaud; Selma, Maloufi; Mouillot, David; Troussellier, Marc; Bernard, Cécile

2016-07-15

Local species richness (SR) is a key characteristic affecting ecosystem functioning. Yet, the mechanisms regulating phytoplankton diversity in freshwater ecosystems are not fully understood, especially in peri-urban environments where anthropogenic pressures strongly impact the quality of aquatic ecosystems. To address this issue, we sampled the phytoplankton communities of 50 lakes in the Paris area (France) characterized by a large gradient of physico-chemical and catchment-scale characteristics. We used large phytoplankton datasets to describe phytoplankton diversity patterns and applied a machine-learning algorithm to test the degree to which species richness patterns are potentially controlled by environmental factors. Selected environmental factors were studied at two scales: the lake-scale (e.g. nutrients concentrations, water temperature, lake depth) and the catchment-scale (e.g. catchment, landscape and climate variables). Then, we used a variance partitioning approach to evaluate the interaction between lake-scale and catchment-scale variables in explaining local species richness. Finally, we analysed the residuals of predictive models to identify potential vectors of improvement of phytoplankton species richness predictive models. Lake-scale and catchment-scale drivers provided similar predictive accuracy of local species richness (R(2)=0.458 and 0.424, respectively). Both models suggested that seasonal temperature variations and nutrient supply strongly modulate local species richness. Integrating lake- and catchment-scale predictors in a single predictive model did not provide increased predictive accuracy; therefore suggesting that the catchment-scale model probably explains observed species richness variations through the impact of catchment-scale variables on in-lake water quality characteristics. Models based on catchment characteristics, which include simple and easy to obtain variables, provide a meaningful way of predicting phytoplankton species richness in temperate lakes. This approach may prove useful and cost-effective for the management and conservation of aquatic ecosystems. Copyright © 2016 Elsevier B.V. All rights reserved.

Characteristic of EBT-XD and EBT3 radiochromic film dosimetry for photon and proton beams

NASA Astrophysics Data System (ADS)

Khachonkham, Suphalak; Dreindl, Ralf; Heilemann, Gerd; Lechner, Wolfgang; Fuchs, Hermann; Palmans, Hugo; Georg, Dietmar; Kuess, Peter

2018-03-01

Recently, a new type of radiochromic film, the EBT-XD film, has been introduced for high dose radiotherapy. The EBT-XD film contains the same structure as the EBT3 film but has a slightly different composition and a thinner active layer. This study benchmarks the EBT-XD against EBT3 film for 6 MV and 10 MV photon beams, as well as for 97.4 MeV and 148.2 MeV proton beams and 15-100 kV x-rays. Dosimetric and film reading characteristics, such as post irradiation darkening, film orientation effect, lateral response artifact (LRA), film sensitivity, energy and beam quality dependency were investigated. Furthermore, quenching effects in the Bragg peak were investigated for a single proton beam energy for both film types, in addition measurements were performed in a spread-out Bragg peak. EBT-XD films showed the same characteristic on film darkening as EBT3. The effects between portrait and landscape orientation were reduced by 3.1% (in pixel value) for EBT-XD compared to EBT3 at a dose of 2000 cGy. The LRA is reduced for EBT-XD films for all investigated dose ranges. The sensitivity of EBT-XD films is superior to EBT3 for doses higher than 500 cGy. In addition, EBT-XD showed a similar dosimetric response for photon and proton irradiation with low energy and beam quality dependency. A quenching effect of 10% was found for both film types. The slight decrease in the thickness of the active layer and different composition configuration of EBT-XD resulted in a reduced film orientation effect and LRA, as well as a sensitivity increase in high-dose regions for both photon and proton beams. Overall, the EBT-XD film improved regarding film reading characteristics and showed advantages in the high-dose region for photon and proton beams.

Augmented Quadruple-Phase Contrast Media Administration and Triphasic Scan Protocol Increases Image Quality at Reduced Radiation Dose During Computed Tomography Urography.

PubMed

Saade, Charbel; Mohamad, May; Kerek, Racha; Hamieh, Nadine; Alsheikh Deeb, Ibrahim; El-Achkar, Bassam; Tamim, Hani; Abdul Razzak, Farah; Haddad, Maurice; Abi-Ghanem, Alain S; El-Merhi, Fadi

The aim of this article was to investigate the opacification of the renal vasculature and the urogenital system during computed tomography urography by using a quadruple-phase contrast media in a triphasic scan protocol. A total of 200 patients with possible urinary tract abnormalities were equally divided between 2 protocols. Protocol A used the conventional single bolus and quadruple-phase scan protocol (pre, arterial, venous, and delayed), retrospectively. Protocol B included a quadruple-phase contrast media injection with a triphasic scan protocol (pre, arterial and combined venous, and delayed), prospectively. Each protocol used 100 mL contrast and saline at a flow rate of 4.5 mL. Attenuation profiles and contrast-to-noise ratio of the renal arteries, veins, and urogenital tract were measured. Effective radiation dose calculation, data analysis by independent sample t test, receiver operating characteristic, and visual grading characteristic analyses were performed. In arterial circulation, only the inferior interlobular arteries in both protocols showed a statistical significance (P < 0.05). Venously, the inferior vena cava, proximal and distal renal veins demonstrated a significant opacification reduction in protocol B than in protocol A (P < 0.001). Protocol B showed a significantly higher mean contrast-to-noise ratio than protocol A (protocol B: 22.68 ± 13.72; protocol A: 14.75 ± 5.76; P < 0.001). Radiation dose was significantly reduced in protocol B (7.38 ± 2.22 mSv) than in protocol A (12.28 ± 2.72 mSv) (P < 0.001). Visual grading characteristic (P < 0.027) and receiver operating characteristic (P < 0.0001) analyses demonstrated a significant preference for protocol B. In computed tomography urography, augmented quadruple-phase contrast media and triphasic scan protocol usage increases the image quality at a reduced radiation dose.

Characteristic of EBT-XD and EBT3 radiochromic film dosimetry for photon and proton beams.

PubMed

Khachonkham, Suphalak; Dreindl, Ralf; Heilemann, Gerd; Lechner, Wolfgang; Fuchs, Hermann; Palmans, Hugo; Georg, Dietmar; Kuess, Peter

2018-03-15

Recently, a new type of radiochromic film, the EBT-XD film, has been introduced for high dose radiotherapy. The EBT-XD film contains the same structure as the EBT3 film but has a slightly different composition and a thinner active layer. This study benchmarks the EBT-XD against EBT3 film for 6 MV and 10 MV photon beams, as well as for 97.4 MeV and 148.2 MeV proton beams and 15-100 kV x-rays. Dosimetric and film reading characteristics, such as post irradiation darkening, film orientation effect, lateral response artifact (LRA), film sensitivity, energy and beam quality dependency were investigated. Furthermore, quenching effects in the Bragg peak were investigated for a single proton beam energy for both film types, in addition measurements were performed in a spread-out Bragg peak. EBT-XD films showed the same characteristic on film darkening as EBT3. The effects between portrait and landscape orientation were reduced by 3.1% (in pixel value) for EBT-XD compared to EBT3 at a dose of 2000 cGy. The LRA is reduced for EBT-XD films for all investigated dose ranges. The sensitivity of EBT-XD films is superior to EBT3 for doses higher than 500 cGy. In addition, EBT-XD showed a similar dosimetric response for photon and proton irradiation with low energy and beam quality dependency. A quenching effect of 10% was found for both film types. The slight decrease in the thickness of the active layer and different composition configuration of EBT-XD resulted in a reduced film orientation effect and LRA, as well as a sensitivity increase in high-dose regions for both photon and proton beams. Overall, the EBT-XD film improved regarding film reading characteristics and showed advantages in the high-dose region for photon and proton beams.

Characteristics of Academic Detailing: Results of a Literature Review

PubMed Central

Van Hoof, Thomas J.; Harrison, Lisa G.; Miller, Nicole E.; Pappas, Maryanne S.; Fischer, Michael A.

2015-01-01

Background Academic detailing is an evidence-based strategy to improve patient care. Efforts to understand the intervention and to use it strategically require an understanding of its important characteristics. A recent systematic review and a subsequent reporting framework call for more accurate and complete reporting of continuing medical education interventions. Objectives Building on a previously published systematic review of 69 studies, we sought to determine how an expanded set of 106 academic detailing studies, including many recently published articles, fared with respect to reporting of important data about this intervention. Methods We conducted a search of MEDLINE, the Cumulative Index to Nursing and Allied Health Literature (clinical) database, and Scopus, from which we identified 38 additional randomized controlled trials published from August 2007 through March 2013. Including the original 69 studies, we abstracted 106 available English-language studies and quantitatively analyzed information about 4 important characteristics of academic detailing: content of visits, clinicians being visited, communication process underlying visits, and outreach workers making visits. Results We found considerable variation (36.5%-100%) in the extent of reporting intervention characteristics, especially about the communication process underlying visits and the outreach workers making visits. The best overall documentation of intervention characteristics of any single study was 68%. Results also demonstrate wide variation in the approach to academic detailing. Conclusions This study demonstrates the need for a standardized approach to collecting and reporting data about academic detailing interventions. Our findings also highlight opportunities for using academic detailing more effectively in research and quality-improvement efforts. PMID:26702333

Characteristics of Academic Detailing: Results of a Literature Review.

PubMed

Van Hoof, Thomas J; Harrison, Lisa G; Miller, Nicole E; Pappas, Maryanne S; Fischer, Michael A

2015-11-01

Academic detailing is an evidence-based strategy to improve patient care. Efforts to understand the intervention and to use it strategically require an understanding of its important characteristics. A recent systematic review and a subsequent reporting framework call for more accurate and complete reporting of continuing medical education interventions. Building on a previously published systematic review of 69 studies, we sought to determine how an expanded set of 106 academic detailing studies, including many recently published articles, fared with respect to reporting of important data about this intervention. We conducted a search of MEDLINE, the Cumulative Index to Nursing and Allied Health Literature (clinical) database, and Scopus, from which we identified 38 additional randomized controlled trials published from August 2007 through March 2013. Including the original 69 studies, we abstracted 106 available English-language studies and quantitatively analyzed information about 4 important characteristics of academic detailing: content of visits, clinicians being visited, communication process underlying visits, and outreach workers making visits. We found considerable variation (36.5%-100%) in the extent of reporting intervention characteristics, especially about the communication process underlying visits and the outreach workers making visits. The best overall documentation of intervention characteristics of any single study was 68%. Results also demonstrate wide variation in the approach to academic detailing. This study demonstrates the need for a standardized approach to collecting and reporting data about academic detailing interventions. Our findings also highlight opportunities for using academic detailing more effectively in research and quality-improvement efforts.

Technical Note: Evaluation of the latency and the beam characteristics of a respiratory gating system using an Elekta linear accelerator and a respiratory indicator device, Abches.

PubMed

Saito, Masahide; Sano, Naoki; Ueda, Koji; Shibata, Yuki; Kuriyama, Kengo; Komiyama, Takafumi; Marino, Kan; Aoki, Shinichi; Onishi, Hiroshi

2018-01-01

To evaluate the basic performance of a respiratory gating system using an Elekta linac and an Abches respiratory-monitoring device. The gating system was comprised of an Elekta Synergy linac equipped with a Response TM gating interface module and an Abches respiratory-monitoring device. The latencies from a reference respiratory signal to the resulting Abches gating output signal and the resulting monitor-ion-chamber output signal were measured. Then, the flatness and symmetry of the gated beams were measured using a two-dimensional ionization chamber array for fixed and arc beams, respectively. Furthermore, the beam quality, TPR 20,10 , and the output of the fixed gated beams were also measured using a Farmer chamber. Each of the beam characteristics was compared with each of those for nongated irradiation. The full latencies at beam-on and beam-off for 6-MV gated beams were 336.4 ± 23.4 ms and 87.6 ± 7.1 ms, respectively. The differences in flatness between the gated and nongated beams were within 0.91% and 0.87% for the gun-target and left-right directions, respectively. In the same manner, the beam symmetries were within 0.68% and 0.82%, respectively. The percentage differences in beam quality and beam output were below 1% for a beam-on time range of 1.1-7 s. The latency of the Elekta gating system combined with Abches was found to be acceptable using our measurement method. Furthermore, we demonstrated that the beam characteristics of the gating system using our respiratory indicator were comparable with the nongated beams for a single-arc gated beam delivery. © 2017 American Association of Physicists in Medicine.

Detective quantum efficiency of photon-counting x-ray detectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanguay, Jesse, E-mail: jessetan@mail.ubc.ca; Yun, Seungman; Kim, Ho Kyung

Purpose: Single-photon-counting (SPC) x-ray imaging has the potential to improve image quality and enable novel energy-dependent imaging methods. Similar to conventional detectors, optimizing image SPC quality will require systems that produce the highest possible detective quantum efficiency (DQE). This paper builds on the cascaded-systems analysis (CSA) framework to develop a comprehensive description of the DQE of SPC detectors that implement adaptive binning. Methods: The DQE of SPC systems can be described using the CSA approach by propagating the probability density function (PDF) of the number of image-forming quanta through simple quantum processes. New relationships are developed to describe PDF transfermore » through serial and parallel cascades to accommodate scatter reabsorption. Results are applied to hypothetical silicon and selenium-based flat-panel SPC detectors including the effects of reabsorption of characteristic/scatter photons from photoelectric and Compton interactions, stochastic conversion of x-ray energy to secondary quanta, depth-dependent charge collection, and electronic noise. Results are compared with a Monte Carlo study. Results: Depth-dependent collection efficiency can result in substantial broadening of photopeaks that in turn may result in reduced DQE at lower x-ray energies (20–45 keV). Double-counting interaction events caused by reabsorption of characteristic/scatter photons may result in falsely inflated image signal-to-noise ratio and potential overestimation of the DQE. Conclusions: The CSA approach is extended to describe signal and noise propagation through photoelectric and Compton interactions in SPC detectors, including the effects of escape and reabsorption of emission/scatter photons. High-performance SPC systems can be achieved but only for certain combinations of secondary conversion gain, depth-dependent collection efficiency, electronic noise, and reabsorption characteristics.« less

Detective quantum efficiency of photon-counting x-ray detectors.

PubMed

Tanguay, Jesse; Yun, Seungman; Kim, Ho Kyung; Cunningham, Ian A

2015-01-01

Single-photon-counting (SPC) x-ray imaging has the potential to improve image quality and enable novel energy-dependent imaging methods. Similar to conventional detectors, optimizing image SPC quality will require systems that produce the highest possible detective quantum efficiency (DQE). This paper builds on the cascaded-systems analysis (CSA) framework to develop a comprehensive description of the DQE of SPC detectors that implement adaptive binning. The DQE of SPC systems can be described using the CSA approach by propagating the probability density function (PDF) of the number of image-forming quanta through simple quantum processes. New relationships are developed to describe PDF transfer through serial and parallel cascades to accommodate scatter reabsorption. Results are applied to hypothetical silicon and selenium-based flat-panel SPC detectors including the effects of reabsorption of characteristic/scatter photons from photoelectric and Compton interactions, stochastic conversion of x-ray energy to secondary quanta, depth-dependent charge collection, and electronic noise. Results are compared with a Monte Carlo study. Depth-dependent collection efficiency can result in substantial broadening of photopeaks that in turn may result in reduced DQE at lower x-ray energies (20-45 keV). Double-counting interaction events caused by reabsorption of characteristic/scatter photons may result in falsely inflated image signal-to-noise ratio and potential overestimation of the DQE. The CSA approach is extended to describe signal and noise propagation through photoelectric and Compton interactions in SPC detectors, including the effects of escape and reabsorption of emission/scatter photons. High-performance SPC systems can be achieved but only for certain combinations of secondary conversion gain, depth-dependent collection efficiency, electronic noise, and reabsorption characteristics.

Systematic Review of Health Economic Impact Evaluations of Risk Prediction Models: Stop Developing, Start Evaluating.

PubMed

van Giessen, Anoukh; Peters, Jaime; Wilcher, Britni; Hyde, Chris; Moons, Carl; de Wit, Ardine; Koffijberg, Erik

2017-04-01

Although health economic evaluations (HEEs) are increasingly common for therapeutic interventions, they appear to be rare for the use of risk prediction models (PMs). To evaluate the current state of HEEs of PMs by performing a comprehensive systematic review. Four databases were searched for HEEs of PM-based strategies. Two reviewers independently selected eligible articles. A checklist was compiled to score items focusing on general characteristics of HEEs of PMs, model characteristics and quality of HEEs, evidence on PMs typically used in the HEEs, and the specific challenges in performing HEEs of PMs. After screening 791 abstracts, 171 full texts, and reference checking, 40 eligible HEEs evaluating 60 PMs were identified. In these HEEs, PM strategies were compared with current practice (n = 32; 80%), to other stratification methods for patient management (n = 19; 48%), to an extended PM (n = 9; 23%), or to alternative PMs (n = 5; 13%). The PMs guided decisions on treatment (n = 42; 70%), further testing (n = 18; 30%), or treatment prioritization (n = 4; 7%). For 36 (60%) PMs, only a single decision threshold was evaluated. Costs of risk prediction were ignored for 28 (46%) PMs. Uncertainty in outcomes was assessed using probabilistic sensitivity analyses in 22 (55%) HEEs. Despite the huge number of PMs in the medical literature, HEE of PMs remains rare. In addition, we observed great variety in their quality and methodology, which may complicate interpretation of HEE results and implementation of PMs in practice. Guidance on HEE of PMs could encourage and standardize their application and enhance methodological quality, thereby improving adequate use of PM strategies. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Effect of Novel Starter Culture on Reduction of Biogenic Amines, Quality Improvement, and Sensory Properties of Doenjang, a Traditional Korean Soybean Fermented Sauce Variety.

PubMed

Shukla, Shruti; Lee, Jong Suk; Park, Hae-Kyong; Yoo, Jung-Ah; Hong, Sung-Yong; Kim, Jong-Kyu; Kim, Myunghee

2015-08-01

To select appropriate microorganisms as starter cultures for the reliable and reproducible fermentation of soybean fermented products of Korean Doenjang, various ratios of fungi (Aspergillus oryzae J, Mucor racemosus 15, M. racemosus 42) combined with Bacillus subtilis TKSP 24 were selected as either single, double, or multiple Meju strains for commercial mass production of Doenjang, followed by analysis of sensory characteristics. In the sensory evaluation, Doenjang BAM15-1 and BAM42-1, which were fermented with multiple strains (1:1:1), showed the highest sensory scores as compared to control. Based on sensory characteristics, 6 Doenjang samples were subjected to quantitative determination of amino acids, free sugars, and organic acids (volatile and nonvolatile) contents, followed by determination of biogenic amines. Total sweet taste amino acid contents were highest in BAM15-1 and BAM42-1 samples (333.7 and 295.8 mg/100 g, respectively) and similar that of control (391.1 mg/100 g). Samples BAM15-1 and BAM42-1 showed the relatively high volatile and nonvolatile organic acid contents (154.24, 192.26, and 71.31, 82.42 mg/100 g, respectively). In addition, BAM15-1 and BAM42-1 showed negligible biogenic amine formation, ranging from 0.00 to 1.02 and 0.00 to 3.92 mg/100 g, respectively. These findings indicate that determination of food components along with sensory and quality attributes using multiple microbial Meju strains as a starter culture may provide substantial results on improved quality fermented Doenjang products. © 2015 Institute of Food Technologists®

Software Reviews Since Acquisition Reform - The Artifact Perspective

DTIC Science & Technology

2004-01-01

Risk Management OLD NEW Slide 13Acquisition of Software Intensive Systems 2004 – Peter Hantos Single, basic software paradigm Single processor Low...software risk mitigation related trade-offs must be done together Integral Software Engineering Activities Process Maturity and Quality Frameworks Quality

Reduction of Defects in Germanium-Silicon

NASA Technical Reports Server (NTRS)

Szofran, Frank R.; Benz, K. W.; Croell, Arne; Dold, Peter; Cobb, Sharon D.; Volz, Martin P.; Motakef, Shariar; Walker, John S.

1999-01-01

It is well established that crystals grown without contact with a container have far superior quality to otherwise similar crystals grown in direct contact with a container. In addition to float-zone processing, detached-Bridgman growth is often cited as a promising tool to improve crystal quality, without the limitations of float zoning. Detached growth has been found to occur quite often during microgravity experiments and considerable improvements of crystal quality have been reported for those cases. However, no thorough understanding of the process or quantitative assessment of the quality improvements exists so far. This project will determine the means to reproducibly grow Ge-Si alloys in the detached mode. Specific objectives include: (1) measurement of the relevant material parameters such as contact angle, growth angle, surface tension, and wetting behavior of the GeSi-melt on potential crucible materials; (2) determination of the mechanism of detached growth including the role of convection; (3) quantitative determination of the differences of defects and impurities among normal Bridgman, detached Bridgman, and floating zone (FZ) growth; (4) investigation of the influence of defined azimuthal or meridional flow due to rotating magnetic fields on the characteristics of detached growth; (5) control time-dependent Marangoni convection in the case of FZ-growth by the use of a rotating magnetic field to examine the influence on the curvature of the solid-liquid interface and the heat and mass transport; and (6) grow high quality GeSi-single crystals with Si-concentration up to 10 at% and diameters up to 20 mm.

Characteristics of good quality pharmaceutical services common to community pharmacies and dispensing general practices.

PubMed

Grey, Elisabeth; Harris, Michael; Rodham, Karen; Weiss, Marjorie C

2016-10-01

In the United Kingdom, pharmaceutical services can be delivered by both community pharmacies (CPs) and dispensing doctor practices (DPs). Both must adhere to minimum standards set out in NHS regulations; however, no common framework exists to guide quality improvement. Previous phases of this research had developed a set of characteristics indicative of good pharmaceutical service provision. To ask key stakeholders to confirm, and rank the importance of, a set of characteristics of good pharmaceutical service provision. A two-round Delphi-type survey was conducted in south-west England and was sent to participants representing three stakeholder groups: DPs, CPs and patients/lay members. Participants were asked to confirm, and rank, the importance of these characteristics as representing good quality pharmaceutical services. Thirty people were sent the first round survey; 22 participants completed both rounds. Median ratings for the 23 characteristics showed that all were seen to represent important aspects of pharmaceutical service provision. Participants' comments highlighted potential problems with the practicality of the characteristics. Characteristics relating to patient safety were deemed to be the most important and those relating to public health the least important. A set of 23 characteristics for providing good pharmaceutical services in CPs and DPs was developed and attained approval from a sample of stakeholders. With further testing and wider discussion, it is hoped that the characteristics will form the basis of a quality improvement tool for CPs and DPs. © 2016 Royal Pharmaceutical Society.

Spectral Band Characterization for Hyperspectral Monitoring of Water Quality

NASA Technical Reports Server (NTRS)

Vermillion, Stephanie C.; Raqueno, Rolando; Simmons, Rulon

2001-01-01

A method for selecting the set of spectral characteristics that provides the smallest increase in prediction error is of interest to those using hyperspectral imaging (HSI) to monitor water quality. The spectral characteristics of interest to these applications are spectral bandwidth and location. Three water quality constituents of interest that are detectable via remote sensing are chlorophyll (CHL), total suspended solids (TSS), and colored dissolved organic matter (CDOM). Hyperspectral data provides a rich source of information regarding the content and composition of these materials, but often provides more data than an analyst can manage. This study addresses the spectral characteristics need for water quality monitoring for two reasons. First, determination of the greatest contribution of these spectral characteristics would greatly improve computational ease and efficiency. Second, understanding the spectral capabilities of different spectral resolutions and specific regions is an essential part of future system development and characterization. As new systems are developed and tested, water quality managers will be asked to determine sensor specifications that provide the most accurate and efficient water quality measurements. We address these issues using data from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) and a set of models to predict constituent concentrations.

Does hospital ownership affect patient experience? An investigation into public-private sector differences in England.

PubMed

Pérotin, Virginie; Zamora, Bernarda; Reeves, Rachel; Bartlett, Will; Allen, Pauline

2013-05-01

Using patient experience survey data, the paper investigates whether hospital ownership affects the level of quality reported by patients whose care is funded by the National Health Service in areas other than clinical quality. We estimate a switching regression model that accounts for (i) some observable characteristics of the patient and the hospital episode; (ii) selection into private hospitals; and (iii) unmeasured hospital characteristics captured by hospital fixed effects. We find that the experience reported by patients in public and private hospitals is different, i.e. most dimensions of quality are delivered differently by the two types of hospitals, with each sector offering greater quality in certain specialties or to certain groups of patients. However, the sum of all ownership effects is not statistically different from zero at sample means. In other words, hospital ownership in and of itself does not affect the level of quality of the average patient's reported experience. Differences in mean reported quality levels between the private and public sectors are entirely attributable to patient characteristics, the selection of patients into public or private hospitals and unobserved characteristics specific to individual hospitals, rather than to hospital ownership. Copyright © 2013 Elsevier B.V. All rights reserved.

Characterizing patient-oriented tools that could be packaged with guidelines to promote self-management and guideline adoption: a meta-review.

PubMed

Vernooij, Robin W M; Willson, Melina; Gagliardi, Anna R

2016-04-14

Self-management is an important component of care for patients or consumers (henceforth termed patients) with chronic conditions. Research shows that patients view guidelines as potential sources of self-management support. However, few guidelines provide such support. The primary purpose of this study was to characterize effective types of self-management interventions that could be packaged as resources in (i.e., appendices) or with guidelines (i.e., accompanying products). We conducted a meta-review of systematic reviews that evaluated self-management interventions. MEDLINE, EMBASE, and the Cochrane Library were searched from 2005 to 2014 for English language systematic reviews. Data were extracted on study characteristics, intervention (content, delivery, duration, personnel, single or multifaceted), and outcomes. Interventions were characterized by the type of component for different domains (inform, activate, collaborate). Summary statistics were used to report the characteristics, frequency, and impact of the types of self-management components. A Measurement Tool to Assess Systematic Reviews (AMSTAR) was used to assess the methodological quality of included reviews. Seventy-seven studies were included (14 low, 44 moderate, 18 high risk of bias). Reviews addressed numerous clinical topics, most frequently diabetes (23, 30 %). Fifty-four focused on single (38 educational, 16 self-directed) and 21 on multifaceted interventions. Support for collaboration with providers was the least frequently used form of self-management. Most conditions featured multiple types of self-management components. The most frequently occurring type of self-management component across all studies was lifestyle advice (72 %), followed by psychological strategies (69 %), and information about the condition (49 %). In most reviews, the intervention both informed and activated patients (57, 76 %). Among the reviews that achieved positive results, 83 % of interventions involved activation alone, 94 % in combination with information, and 95 % in combination with information and collaboration. No trends in the characteristics and impact of self-management by condition were observed. This study revealed numerous opportunities for enhancing guidelines with resources for both patients and providers to support self-management. This includes single resources that provide information and/or prompt activation. Further research is needed to more firmly establish the statistical association between the characteristics of self-management support and outcomes; and to and optimize the design of self-management resources that are included in or with guidelines, in particular, resources that prompt collaboration with providers.

Factors associated with the quality of life of nursing home residents in Hong Kong.

PubMed

Lai, C K Y; Leung, D D M; Kwong, E W Y; Lee, R L P

2015-03-01

The quality of life of nursing home residents has increasingly become an important dimension when evaluating care in a nursing home. Not a lot is known about the quality of life of nursing home residents in Hong Kong. To investigate factors associated with the quality of life of nursing home residents to inform care management policies and service delivery. This study reports data from 125 nursing home residents. The Hong Kong Chinese version of the World Health Organization's Quality of Life-Brief version was used. Other measures used include the Mini-Mental State Examination, the Mini-Nutritional Assessment, the Geriatric Depression Scale, the Modified STRATIFY Falls Prediction Tool and the Modified Barthel Index. A univariate analysis and a multiple regression analysis were then performed to identify the influencing factors. The participants reported a moderate level of quality of life, with the exception in the domain of social relationships. A univariate analysis found some associations between demographic and clinical characteristics and quality of life. A multiple regression analysis indicated that pain, being younger (65-74 years), having son(s) or daughter(s), and cognitive impairment were negatively associated factors. The smallness of the sample from a single study site limits the generalizability of the findings. This study provides information that has hitherto been lacking on the quality of life and associated factors among local nursing home residents in Hong Kong. The preliminary findings can help healthcare staff to identify those at risk of suffering from a low quality of life and to design appropriate care interventions to improve the quality of life of such residents. Adequate pain relief, family connectedness and special attention to the needs of those with cognitive impairment are important considerations in ensuring a better quality of life for older people in long-term residential care. © 2014 International Council of Nurses.

Comparison of the operational and safety characteristics of the single point urban and diamond interchanges.

DOT National Transportation Integrated Search

1996-01-01

The purpose of this study was to evaluate and compare the safety and operational characteristics of the single point urban interchange (SPUI) and the diamond interchange (DI) and develop guidelines that identify traffic and/or geometric conditions th...

Operation and biasing for single device equivalent to CMOS

DOEpatents

Welch, James D.

2001-01-01

Disclosed are semiconductor devices including at least one junction which is rectifying whether the semiconductor is caused to be N or P-type, by the presence of field induced carriers. In particular, inverting and non-inverting gate voltage channel induced semiconductor single devices with operating characteristics similar to conventional multiple device CMOS systems, which can be operated as modulators, are disclosed as are a non-latching SCR and an approach to blocking parasitic currents. Operation of the gate voltage channel induced semiconductor single devices with operating characteristics similar to multiple device CMOS systems under typical bias schemes is described, and simple demonstrative five mask fabrication procedures for the inverting and non-inverting gate voltage channel induced semiconductor single devices with operating characteristics similar to multiple device CMOS systems are also presented.

U-shaped associations between time in bed and the physical and mental functioning of Japanese civil servants: the roles of work, family, behavioral and sleep quality characteristics.

PubMed

Sekine, M; Tatsuse, T; Cable, N; Chandola, T; Marmot, M

2014-09-01

This study aimed to evaluate (i) whether work, family, behavioral and sleep quality characteristics differ among individuals with different time in bed (TIB), and (ii) whether and how much the U-shaped associations between TIB and health can be explained by these characteristics. Participants were 3510 employees (2371 males and 1139 females) aged 20-65 years working in local government in Japan. They completed a questionnaire regarding work, family, and behavioral characteristics. Sleep quality and physical and mental functioning were evaluated using the Pittsburgh Sleep Quality Index and the Short Form 36. High job demands, long work hours, and high work-family conflict were more prevalent among those with short TIB. Those with long TIB had daily drinking habits. Whereas those with short TIB had poor sleep, mainly due to poor subjective sleep quality and daytime dysfunction, those with long TIB had poor sleep, mainly due to long sleep latency, poor sleep efficiency and sleep disturbances. The U-shaped associations between TIB and poor physical and mental health, with the best health observed in those spending ~8 h in bed, weakened considerably after adjustment for sleep quality, followed by work and family characteristics. After adjusting for behavioral characteristics and long-standing illnesses, the associations hardly changed. The U-shaped associations between TIB and health may be explained by U-shaped associations between TIB and poor sleep and psychosocial stress in work and family life. Copyright © 2014 Elsevier B.V. All rights reserved.

Positive direct current corona discharges in single wire-duct electrostatic precipitators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yehia, Ashraf, E-mail: yehia30161@yahoo.com; Department of Physics, Faculty of Science, Assiut University, Assiut 71516, Arab Republic of Egypt; Abdel-Fattah, E.

This paper is aimed to study the characteristics of the positive dc corona discharges in single wire-duct electrostatic precipitators. Therefore, the corona discharges were formed inside dry air fed single wire-duct reactor under positive dc voltage at the normal atmospheric conditions. The corona current-voltage characteristics curves have been measured in parallel with the ozone concentration generated inside the reactor under different discharge conditions. The corona current-voltage characteristics curves have agreed with a semi empirical equation derived from the previous studies. The experimental results of the ozone concentration generated inside the reactor were formulated in the form of an empirical equationmore » included the different parameters that were studied experimentally. The obtained equations are valid to expect both the current-voltage characteristics curves and the corresponding ozone concentration that generates with the positive dc corona discharges inside single wire-duct electrostatic precipitators under any operating conditions in the same range of the present study.« less

Improved Murine Blastocyst Quality and Development in a Single Culture Medium Compared to Sequential Culture Media

PubMed Central

Hennings, Justin M.; Zimmer, Randall L.; Nabli, Henda; Davis, J. Wade; Sutovsky, Peter; Sutovsky, Miriam; Sharpe-Timms, Kathy L.

2015-01-01

Objective: Validate single versus sequential culture media for murine embryo development. Design: Prospective laboratory experiment. Setting: Assisted Reproduction Laboratory. Animals: Murine embryos. Interventions: Thawed murine zygotes cultured for 3 or 5 days (d3 or d5) in single or sequential embryo culture media developed for human in vitro fertilization. Main Outcome Measures: On d3, zygotes developing to the 8 cell (8C) stage or greater were quantified using 4’,6-diamidino-2-phenylindole (DAPI), and quality was assessed by morphological analysis. On d5, the number of embryos reaching the blastocyst stage was counted. DAPI was used to quantify total nuclei and inner cell mass nuclei. Localization of ubiquitin C-terminal hydrolase L1 (UCHL1) and ubiquitin C-terminal hydrolase L3 (UCHL3) was reference points for evaluating cell quality. Results: Comparing outcomes in single versus to sequential media, the odds of embryos developing to the 8C stage on d3 were 2.34 time greater (P = .06). On d5, more embryos reached the blastocyst stage (P = <.0001), hatched, and had significantly more trophoblast cells (P = .005) contributing to the increased total cell number. Also at d5, localization of distinct cytoplasmic UCHL1 and nuclear UCHL3 was found in high-quality hatching blastocysts. Localization of UCHL1 and UCHL3 was diffuse and inappropriately dispersed throughout the cytoplasm in low-quality nonhatching blastocysts. Conclusions: Single medium yields greater cell numbers, an increased growth rate, and more hatching of murine embryos. Cytoplasmic UCHL1 and nuclear UHCL3 localization patterns were indicative of embryo quality. Our conclusions are limited to murine embryos but one might speculate that single medium may also be more beneficial for human embryo culture. Human embryo studies are needed. PMID:26668049

Improved Murine Blastocyst Quality and Development in a Single Culture Medium Compared to Sequential Culture Media.

PubMed

Hennings, Justin M; Zimmer, Randall L; Nabli, Henda; Davis, J Wade; Sutovsky, Peter; Sutovsky, Miriam; Sharpe-Timms, Kathy L

2016-03-01

Validate single versus sequential culture media for murine embryo development. Prospective laboratory experiment. Assisted Reproduction Laboratory. Murine embryos. Thawed murine zygotes cultured for 3 or 5 days (d3 or d5) in single or sequential embryo culture media developed for human in vitro fertilization. On d3, zygotes developing to the 8 cell (8C) stage or greater were quantified using 4',6-diamidino-2-phenylindole (DAPI), and quality was assessed by morphological analysis. On d5, the number of embryos reaching the blastocyst stage was counted. DAPI was used to quantify total nuclei and inner cell mass nuclei. Localization of ubiquitin C-terminal hydrolase L1 (UCHL1) and ubiquitin C-terminal hydrolase L3 (UCHL3) was reference points for evaluating cell quality. Comparing outcomes in single versus to sequential media, the odds of embryos developing to the 8C stage on d3 were 2.34 time greater (P = .06). On d5, more embryos reached the blastocyst stage (P = <.0001), hatched, and had significantly more trophoblast cells (P = .005) contributing to the increased total cell number. Also at d5, localization of distinct cytoplasmic UCHL1 and nuclear UCHL3 was found in high-quality hatching blastocysts. Localization of UCHL1 and UCHL3 was diffuse and inappropriately dispersed throughout the cytoplasm in low-quality nonhatching blastocysts. Single medium yields greater cell numbers, an increased growth rate, and more hatching of murine embryos. Cytoplasmic UCHL1 and nuclear UHCL3 localization patterns were indicative of embryo quality. Our conclusions are limited to murine embryos but one might speculate that single medium may also be more beneficial for human embryo culture. Human embryo studies are needed. © The Author(s) 2015.

Methodological review of the quality of reach out and read: does it "work"?

PubMed

Yeager Pelatti, Christina; Pentimonti, Jill M; Justice, Laura M

2014-04-01

A considerable percentage of American children and adults fail to learn adequate literacy skills and read below a third grade level. Shared book reading is perhaps the single most important activity to prepare young children for success in reading. The primary objective of this manuscript was to critically review the methodological quality of Read Out and Read (ROR), a clinically based literacy program/intervention that teaches parents strategies to incorporate while sharing books with children as a method of preventing reading difficulties and academic struggles. A PubMed search was conducted. Articles that met three criteria were considered. First, the study must be clinically based and include parent contact with a pediatrician. Second, parental counseling ("anticipatory guidance") about the importance of parent-child book reading must be included. Third, only experimental or quasi-experimental studies were included; no additional criteria were used. Published articles from any year and peer-reviewed journal were considered. Study quality was determined using a modified version of the Downs and Black (1998) checklist assessing four categories: (1) Reporting, (2) External Validity, (3) Internal Validity-Bias, and (4) Internal Validity-Confounding. We were also interested in whether quality differed based on study design, children's age, sample size, and study outcome. Eleven studies met the inclusion criteria. The overall quality of evidence was variable across all studies; Reporting and External Validity categories were relatively strong while methodological concerns were found in the area of internal validity. Quality scores differed on the four study characteristics. Implications related to clinical practice and future studies are discussed.

Role of compassion competence among clinical nurses in professional quality of life.

PubMed

Lee, Y; Seomun, G

2016-09-01

The study aimed to explore measurable compassion competence among nurses and to examine the relationships between nurses' compassion competence and levels of compassion satisfaction, compassion fatigue and secondary traumatic stress. Compassion is a vital asset in the nursing profession. It is necessary to explore whether compassion competence is a factor influencing professional quality of life. This study utilized a multicenter descriptive cross-sectional survey. Data were collected from 680 nurses. Professional quality of life based on nurses' general characteristics showed a significant difference in the subjects' age, marital status, education, and total clinical experience. In addition, compassion competence had a significant positive correlation with compassion satisfaction and STS, whereas it had a significant negative correlation with burnout. Compassion competence was a factor influencing compassion satisfaction and burnout in professional quality of life. Our study included nurses with at least 1 year of clinical experience in a single cultural area, which limits its widespread applicability. To improve generalizability, future studies should include clinical nurses of various races, working in diverse cultural areas and with various levels of experience (including entry-level nurses and nursing students). Compassion competence of clinical nurses was a predictive factor for professional quality of life. Hospital administrators, nurse leaders and policy makers should develop and adopt nurse-retaining strategies that focus on improving nurses' compassion competence in order to reduce their burnout. We recommend the development of educational programmes to improve nurses' compassion competence and thereby enhance their professional quality of life. © 2016 International Council of Nurses.

Research on the relationship between the structural properties of bedding layer in spring mattress and sleep quality.

PubMed

Shen, Liming; Chen, Yu-xia; Guo, Yong; Zhong, ShiLu; Fang, Fei; Zhao, Jing; Hu, Tian-Yi

2012-01-01

Mattress, as a sleep platform, its types and physical properties has an important effect on sleep quality and rest efficiency. In this paper, by subjective evaluations, analysis of sleeping behaviors and tests of depth of sleep, the relationship between characteristics of the bedding materials, the structure of mattress, sleep quality and sleep behaviors were studied. The results showed that: (1) Characteristics of the bedding materials and structure of spring mattress had a remarkable effect on sleep behaviors and sleep quality. An optimum combination of the bedding materials, the structure of mattress and its core could improve the overall comfort of mattress, thereby improving the depth of sleep and sleep quality. (2) Sleep behaviors had a close relationship with sleeping postures and sleep habits. The characteristics of sleep behaviors vary from person to person.

Effect of Chicory Fiber and Smoking on Quality Characteristics of Restructured Sausages.

PubMed

Choi, Hyun-Su; Choi, Hyung-Gyu; Choi, Yeong-Seok; Kim, Jong-Hee; Lee, Ju-Ho; Jung, Eun-Hee; Lee, Sang-Hwa; Choi, Yang-Il; Choi, Jung-Seok

2016-01-01

This study was conducted to investigate the effects of chicory fiber for the replacement of fat and smoking on quality characteristics of restructured sausages. Treatments were as follows; Pork backfat 20%, T1: Pork backfat 10% + Chicory fiber 10%, T2: CONTROL + Smoking, T3: T1 + Smoking. The addition of chicory fiber significantly reduced the moisture, fat, hardness and pH values, whereas the smoking treatment increased the fat, redness and pH values of restructured sausages (p<0.01). Additionally, interaction of them significantly affected the ash, chewiness and hardness values of restructured sausages. As a result, although the addition of chicory fiber decreased the quality characteristics of sausage, smoking treatment improved the reduced quality. Therefore, the chicory fiber and smoking treatment is helpful to develop restructured sausage products with reduced fat and compensated quality.

Integrating Flight Dynamics & Control Analysis and Simulation in Rotorcraft Conceptual Design

NASA Technical Reports Server (NTRS)

Lawrence, Ben; Berger, Tom; Tischler, Mark B.; Theodore, Colin R; Elmore, Josh; Gallaher, Andrew; Tobias, Eric L.

2016-01-01

The development of a toolset, SIMPLI-FLYD ('SIMPLIfied FLight dynamics for conceptual Design') is described. SIMPLI-FLYD is a collection of tools that perform flight dynamics and control modeling and analysis of rotorcraft conceptual designs including a capability to evaluate the designs in an X-Plane-based real-time simulation. The establishment of this framework is now facilitating the exploration of this new capability, in terms of modeling fidelity and data requirements, and the investigation of which stability and control and handling qualities requirements are appropriate for conceptual design. Illustrative design variation studies for single main rotor and tiltrotor vehicle configurations show sensitivity of the stability and control characteristics and an approach to highlight potential weight savings by identifying over-design.

Metal nanoparticle film-based room temperature Coulomb transistor.

PubMed

Willing, Svenja; Lehmann, Hauke; Volkmann, Mirjam; Klinke, Christian

2017-07-01

Single-electron transistors would represent an approach to developing less power-consuming microelectronic devices if room temperature operation and industry-compatible fabrication were possible. We present a concept based on stripes of small, self-assembled, colloidal, metal nanoparticles on a back-gate device architecture, which leads to well-defined and well-controllable transistor characteristics. This Coulomb transistor has three main advantages. By using the scalable Langmuir-Blodgett method, we combine high-quality chemically synthesized metal nanoparticles with standard lithography techniques. The resulting transistors show on/off ratios above 90%, reliable and sinusoidal Coulomb oscillations, and room temperature operation. Furthermore, this concept allows for versatile tuning of the device properties such as Coulomb energy gap and threshold voltage, as well as period, position, and strength of the oscillations.

Development of micro-four-point probe in a scanning tunneling microscope for in situ electrical transport measurement.

PubMed

Ge, Jian-Feng; Liu, Zhi-Long; Gao, Chun-Lei; Qian, Dong; Liu, Canhua; Jia, Jin-Feng

2015-05-01

Electrons at surface may behave differently from those in bulk of a material. Multi-functional tools are essential in comprehensive studies on a crystal surface. Here, we developed an in situ microscopic four-point probe (4PP) transport measurement system on the basis of a scanning tunneling microscope (STM). In particular, convenient replacement between STM tips and micro-4PPs enables systematic investigations of surface morphology, electronic structure, and electrical transport property of a same sample surface. Performances of the instrument are demonstrated with high-quality STM images, tunneling spectra, and low-noise electrical I-V characteristic curves of a single-layer FeSe film grown on a conductive SrTiO3 surface.

Specification-based software sizing: An empirical investigation of function metrics

NASA Technical Reports Server (NTRS)

Jeffery, Ross; Stathis, John

1993-01-01

For some time the software industry has espoused the need for improved specification-based software size metrics. This paper reports on a study of nineteen recently developed systems in a variety of application domains. The systems were developed by a single software services corporation using a variety of languages. The study investigated several metric characteristics. It shows that: earlier research into inter-item correlation within the overall function count is partially supported; a priori function counts, in themself, do not explain the majority of the effort variation in software development in the organization studied; documentation quality is critical to accurate function identification; and rater error is substantial in manual function counting. The implication of these findings for organizations using function based metrics are explored.

Tapered fiber based high power random laser.

PubMed

Zhang, Hanwei; Du, Xueyuan; Zhou, Pu; Wang, Xiaolin; Xu, Xiaojun

2016-04-18

We propose a novel high power random fiber laser (RFL) based on tapered fiber. It can overcome the power scaling limitation of RFL while maintaining good beam quality to a certain extent. An output power of 26.5 W has been achieved in a half-open cavity with one kilometer long tapered fiber whose core diameter gradually changes from 8 μm to 20 μm. The steady-state light propagation equations have been modified by taking into account the effective core area to demonstrate the tapered RFL through numerical calculations. The numerical model effectively describes the power characteristics of the tapered fiber based RFL, and both the calculating and experimental results show higher power exporting potential compared with the conventional single mode RFL.

Acousto-optic laser projection systems for displaying TV information

NASA Astrophysics Data System (ADS)

Gulyaev, Yu V.; Kazaryan, M. A.; Mokrushin, Yu M.; Shakin, O. V.

2015-04-01

This review addresses various approaches to television projection imaging on large screens using lasers. Results are presented of theoretical and experimental studies of an acousto-optic projection system operating on the principle of projecting an image of an entire amplitude-modulated television line in a single laser pulse. We consider characteristic features of image formation in such a system and the requirements for its individual components. Particular attention is paid to nonlinear distortions of the image signal, which show up most severely at low modulation signal frequencies. We discuss the feasibility of improving the process efficiency and image quality using acousto-optic modulators and pulsed lasers. Real-time projectors with pulsed line imaging can be used for controlling high-intensity laser radiation.

A multilevel investigation on nursing turnover intention: the cross-level role of leader-member exchange.

PubMed

Portoghese, Igor; Galletta, Maura; Battistelli, Adalgisa; Leiter, Michael P

2015-09-01

To analyse nursing turnover intention from the unit by using multilevel approach, examining at the individual level, the relationships between job characteristics, job satisfaction and turnover intention, and at the group level the role of leader-member exchange. Research on nursing turnover has given little attention to the effects of multilevel factors. Aggregated data of 935 nurses nested within 74 teams of four Italian hospitals were collected in 2009 via a self-administered questionnaire. Hierarchical linear modelling showed that job satisfaction mediated the relationship between job characteristics and intention to leave at the individual level. At the unit level, leader-member exchange was directly linked to intention to leave. Furthermore, cross-level interaction revealed that leader-member exchange moderated the relationship between job characteristics and job satisfaction. This study supported previous research in single-level turnover studies concerning the key role of job satisfaction, providing evidence that job characteristics are important in creating motivating and satisfying jobs. At the unit-level, leader-member exchange offers an approach to understand the role of unit-specific conditions created by leaders on nurses' workplace wellbeing. This study showed that it is important for nursing managers to recognise the relevance of implementing management practices that foster healthy workplaces centred on high-quality nurse-supervisor relationships. © 2014 John Wiley & Sons Ltd.

Automated microfluidic platform for systematic studies of colloidal perovskite nanocrystals: towards continuous nano-manufacturing.

PubMed

Epps, Robert W; Felton, Kobi C; Coley, Connor W; Abolhasani, Milad

2017-11-21

Colloidal organic/inorganic metal-halide perovskite nanocrystals have recently emerged as a potential low-cost replacement for the semiconductor materials in commercial photovoltaics and light emitting diodes. However, unlike III-V and IV-VI semiconductor nanocrystals, studies of colloidal perovskite nanocrystals have yet to develop a fundamental and comprehensive understanding of nucleation and growth kinetics. Here, we introduce a modular and automated microfluidic platform for the systematic studies of room-temperature synthesized cesium-lead halide perovskite nanocrystals. With abundant data collection across the entirety of four orders of magnitude reaction time span, we comprehensively characterize nanocrystal growth within a modular microfluidic reactor. The developed high-throughput screening platform features a custom-designed three-port flow cell with translational capability for in situ spectral characterization of the in-flow synthesized perovskite nanocrystals along a tubular microreactor with an adjustable length, ranging from 3 cm to 196 cm. The translational flow cell allows for sampling of twenty unique residence times at a single equilibrated flow rate. The developed technique requires an average total liquid consumption of 20 μL per spectra and as little as 2 μL at the time of sampling. It may continuously sample up to 30 000 unique spectra per day in both single and multi-phase flow formats. Using the developed plug-and-play microfluidic platform, we study the growth of cesium lead trihalide perovskite nanocrystals through in situ monitoring of their absorption and emission band-gaps at residence times ranging from 100 ms to 17 min. The automated microfluidic platform enables a systematic study of the effect of mixing enhancement on the quality of the synthesized nanocrystals through a direct comparison between single- and multi-phase flow systems at similar reaction time scales. The improved mixing characteristics of the multi-phase flow format results in high-quality perovskite nanocrystals with kinetically tunable emission wavelength, ranging as much as 25 nm at equivalent residence times. Further application of this unique platform would allow rapid parameter optimization in the colloidal synthesis of a wide range of nanomaterials (e.g., metal or semiconductor), that is directly transferable to continuous manufacturing in a numbered-up platform with a similar characteristic length scale.

General practice variation in spirometry testing among patients receiving first-time prescriptions for medication targeting obstructive lung disease in Denmark: a population-based observational study

PubMed Central

2013-01-01

Background Spirometry testing is essential to confirm an obstructive lung disease, but studies have reported that a large proportion of patients diagnosed with COPD or asthma have no history of spirometry testing. Also, it has been shown that many patients are prescribed medication for obstructive lung disease without a relevant diagnosis or spirometry test registered. General practice characteristics have been reported to influence diagnosis and management of several chronic diseases. However, these findings are inconsistent, and it is uncertain whether practice characteristics influence spirometry testing among patients receiving medication for obstructive lung disease. The aim of this study was therefore to examine if practice characteristics are associated with spirometry testing among patients receiving first-time prescriptions for medication targeting obstructive lung disease. Methods A national register-based cohort study was performed. All patients over 18 years receiving first-time prescriptions for medication targeting obstructive lung disease in 2008 were identified and detailed patient-specific data on sociodemographic status and spirometry tests were extracted. Information on practice characteristics like number of doctors, number of patients per doctor, training practice status, as well as age and gender of the general practitioners was linked to each medication user. Results Partnership practices had a higher odds ratio (OR) of performing spirometry compared with single-handed practices (OR 1.24, CI 1.09-1.40). We found a significant association between increasing general practitioner age and decreasing spirometry testing. This tendency was most pronounced among partnership practices, where doctors over 65 years had the lowest odds of spirometry testing (OR 0.25, CI 0.10-0.61). Training practice status was significantly associated with spirometry testing among single-handed practices (OR 1.40, CI 1.10-1.79). Conclusion Some of the variation in spirometry testing among patients receiving first-time prescriptions for medication targeting obstructive lung disease was associated with practice characteristics. This variation in performance may indicate a potential for quality improvement. PMID:23923987

Targeting, universalism, and single-mother poverty: a multilevel analysis across 18 affluent democracies.

PubMed

Brady, David; Burroway, Rebekah

2012-05-01

We examine the influence of individual characteristics and targeted and universal social policy on single-mother poverty with a multilevel analysis across 18 affluent Western democracies. Although single mothers are disproportionately poor in all countries, there is even more cross-national variation in single-mother poverty than in poverty among the overall population. By far, the United States has the highest rate of poverty among single mothers among affluent democracies. The analyses show that single-mother poverty is a function of the household's employment, education, and age composition, and the presence of other adults in the household. Beyond individual characteristics, social policy exerts substantial influence on single-mother poverty. We find that two measures of universal social policy significantly reduce single-mother poverty. However, one measure of targeted social policy does not have significant effects, and another measure is significantly negative only when controlling for universal social policy. Moreover, the effects of universal social policy are larger. Additional analyses show that universal social policy does not have counterproductive consequences in terms of family structure or employment, while the results are less clear for targeted social policy. Although debates often focus on altering the behavior or characteristics of single mothers, welfare universalism could be an even more effective anti-poverty strategy.

A regional classification scheme for estimating reference water quality in streams using land-use-adjusted spatial regression-tree analysis

USGS Publications Warehouse

Robertson, Dale M.; Saad, D.A.; Heisey, D.M.

2006-01-01

Various approaches are used to subdivide large areas into regions containing streams that have similar reference or background water quality and that respond similarly to different factors. For many applications, such as establishing reference conditions, it is preferable to use physical characteristics that are not affected by human activities to delineate these regions. However, most approaches, such as ecoregion classifications, rely on land use to delineate regions or have difficulties compensating for the effects of land use. Land use not only directly affects water quality, but it is often correlated with the factors used to define the regions. In this article, we describe modifications to SPARTA (spatial regression-tree analysis), a relatively new approach applied to water-quality and environmental characteristic data to delineate zones with similar factors affecting water quality. In this modified approach, land-use-adjusted (residualized) water quality and environmental characteristics are computed for each site. Regression-tree analysis is applied to the residualized data to determine the most statistically important environmental characteristics describing the distribution of a specific water-quality constituent. Geographic information for small basins throughout the study area is then used to subdivide the area into relatively homogeneous environmental water-quality zones. For each zone, commonly used approaches are subsequently used to define its reference water quality and how its water quality responds to changes in land use. SPARTA is used to delineate zones of similar reference concentrations of total phosphorus and suspended sediment throughout the upper Midwestern part of the United States. ?? 2006 Springer Science+Business Media, Inc.

Reporting characteristics of meta-analyses in orthodontics: methodological assessment and statistical recommendations.

PubMed

Papageorgiou, Spyridon N; Papadopoulos, Moschos A; Athanasiou, Athanasios E

2014-02-01

Ideally meta-analyses (MAs) should consolidate the characteristics of orthodontic research in order to produce an evidence-based answer. However severe flaws are frequently observed in most of them. The aim of this study was to evaluate the statistical methods, the methodology, and the quality characteristics of orthodontic MAs and to assess their reporting quality during the last years. Electronic databases were searched for MAs (with or without a proper systematic review) in the field of orthodontics, indexed up to 2011. The AMSTAR tool was used for quality assessment of the included articles. Data were analyzed with Student's t-test, one-way ANOVA, and generalized linear modelling. Risk ratios with 95% confidence intervals were calculated to represent changes during the years in reporting of key items associated with quality. A total of 80 MAs with 1086 primary studies were included in this evaluation. Using the AMSTAR tool, 25 (27.3%) of the MAs were found to be of low quality, 37 (46.3%) of medium quality, and 18 (22.5%) of high quality. Specific characteristics like explicit protocol definition, extensive searches, and quality assessment of included trials were associated with a higher AMSTAR score. Model selection and dealing with heterogeneity or publication bias were often problematic in the identified reviews. The number of published orthodontic MAs is constantly increasing, while their overall quality is considered to range from low to medium. Although the number of MAs of medium and high level seems lately to rise, several other aspects need improvement to increase their overall quality.

Growing vertical ZnO nanorod arrays within graphite: efficient isolation of large size and high quality single-layer graphene.

PubMed

Ding, Ling; E, Yifeng; Fan, Louzhen; Yang, Shihe

2013-07-18

We report a unique strategy for efficiently exfoliating large size and high quality single-layer graphene directly from graphite into DMF dispersions by growing ZnO nanorod arrays between the graphene layers in graphite.

Evaluation of coal-mining impacts using numerical classification of benthic invertebrate data from streams draining a heavily mined basin in eastern Tennessee

USGS Publications Warehouse

Bradfield, A.D.

1986-01-01

Coal-mining impacts on Smoky Creek, eastern Tennessee were evaluated using water quality and benthic invertebrate data. Data from mined sites were also compared with water quality and invertebrate fauna found at Crabapple Branch, an undisturbed stream in a nearby basin. Although differences in water quality constituent concentrations and physical habitat conditions at sampling sites were apparent, commonly used measures of benthic invertebrate sample data such as number of taxa, sample diversity, number of organisms, and biomass were inadequate for determining differences in stream environments. Clustering algorithms were more useful in determining differences in benthic invertebrate community structure and composition. Normal (collections) and inverse (species) analyses based on presence-absence data of species of Ephemeroptera, Plecoptera, and Tricoptera were compared using constancy, fidelity, and relative abundance of species found at stations with similar fauna. These analyses identified differences in benthic community composition due to seasonal variations in invertebrate life histories. When data from a single season were examined, sites on tributary streams generally clustered separately from sites on Smoky Creek. These analyses compared with differences in water quality, stream size, and substrate characteristics between tributary sites and the more degraded main stem sites, indicated that numerical classification of invertebrate data can provide discharge-independent information useful in rapid evaluations of in-stream environmental conditions. (Author 's abstract)

Postpolio Syndrome: Using a Single Case Study

ERIC Educational Resources Information Center

Obringer, S. John; Elrod, G. Franklin

2004-01-01

The purpose of this study was to identify the major characteristics of postpolio syndrome (PPS), investigate physical and psychological limitations, and comprehensively review current medical interventions through a single subject design. The study addresses the symptoms and characteristics, the effect on life style, and the current recommended…

Effect on Quality Characteristics of Tomatoes Grown Under Well-Watered and Drought Stress Conditions.

PubMed

Klunklin, Warinporn; Savage, Geoffrey

2017-07-25

Tomatoes are one of the most nutritionally and economically important crops in New Zealand and around the world. Tomatoes require large amounts of water to grow well and are adversely affected by drought stress. However, few studies have evaluated the physicochemical characteristics of commercial tomatoes grown under water stress conditions. Four tomato cultivars (Incas, Marmande, Scoresby Dwarf, and Window Box Red) were grown in a greenhouse under well-watered and drought stress conditions and the tomatoes were harvested when ripe. The physicochemical properties and antioxidant contents of the fruits were compared. There were significant differences between cultivars in quality characteristics-such as dry matter, total soluble solids, and pH parameters-but there were no differences in the quality characteristics between the two treatments of the fruits ( p > 0.05); however, there were significant differences ( p < 0.05) in the antioxidant compositions (lycopene, total phenolics, and flavonoids) and antioxidant activities (DPPH and ABTS) of the fruits of both cultivars and treatments. Overall, these results indicated that tomatoes increased their bioactive compounds without changing any quality characteristics when exposed to water stress conditions.

Are middle schools harmful? The role of transition timing, classroom quality and school characteristics.

PubMed

Holas, Igor; Huston, Aletha C

2012-03-01

Are middle schools ill-suited for early adolescents, or can school characteristics account for any differences in student functioning? Achievement, school engagement, and perceived competence of children starting middle schools in 5th and 6th grades were compared to those of their same-grade peers in elementary schools in a national, longitudinal sample (NICHD Study of Early Child Care and Youth Development, n = 855; 52% Female, 82% White). Classroom quality (observed and teacher-reported) and school characteristics (composition and size) were considered as explanations for any relationships between school-level and student functioning. Fifth grade middle school students did not differ from those in elementary school, but students entering middle school in 6th grade, compared to those in elementary school, experienced lower classroom quality, which in turn predicted slightly lower achievement. They also had lower school engagement, explained by larger school size. Classroom quality and school characteristics predicted youth functioning regardless of school type. We suggest reshaping the research and policy debate with renewed focus on classroom quality and school size instead of grade organization.

Speeding up image quality improvement in random phase-free holograms using ringing artifact characteristics.

PubMed

Nagahama, Yuki; Shimobaba, Tomoyoshi; Kakue, Takashi; Masuda, Nobuyuki; Ito, Tomoyoshi

2017-05-01

A holographic projector utilizes holography techniques. However, there are several barriers to realizing holographic projections. One is deterioration of hologram image quality caused by speckle noise and ringing artifacts. The combination of the random phase-free method and the Gerchberg-Saxton (GS) algorithm has improved the image quality of holograms. However, the GS algorithm requires significant computation time. We propose faster methods for image quality improvement of random phase-free holograms using the characteristics of ringing artifacts.

Water-quality data for selected North Carolina streams and reservoirs in the Triangle Area Water Supply Monitoring Project, 1988-92

USGS Publications Warehouse

Garrett, Ronald G.; Taylor, John E.; Middleton, Terry L.

1994-01-01

The Triangle Area Water Supply Monitoring Project was developed to assess regional water-quality characteristics in drinking-water supplies and to provide a basis for determining trends in water quality for the Research Triangle area, which is one of the fastest growing areas in North Carolina. The study area is in the upper Neuse River Basin and the upper Cape Fear River Basin in the north-central Piedmont Province of the State. Hydrologic data were collected at 21 reservoir sites and 30 stream sites from October 1988 through September 1992 to define water-quality characteristics. The data collected at these sites include streamflow data and approximately 275 physical properties and chemical characteristics of surface water.

The importance of productive patient-professional interaction for the well-being of chronically ill patients.

PubMed

Cramm, Jane Murray; Nieboer, Anna Petra

2015-04-01

To investigate patient-professional interactions and identify the association between quality of care, productivity of patient-professional interaction, and chronically ill patients' well-being. Questionnaires were distributed to chronically ill patients [T1 (2011), 2,191/4,693 (47 %) respondents; T2 (2012), 1,722/4,350 (40 %) respondents]. Patients perceived a higher degree of productive interaction with general practitioners compared to other professionals. Bivariate analyses showed that patients' well-being at T2 was positively related to well-being at T1 (r = 0.70), quality of care (r = 0.12), and productive patient-professional interaction (r = 0.31; all p ≤ 0.001). Single status (r = -0.14), low education (r = -0.11), and female gender (r = -0.11; all p ≤ 0.001) were negatively associated with well-being. Multivariate analyses showed that after controlling for background characteristics and well-being at baseline quality of care is associated with patients' well-being at T2 (p ≤ 0.01). When productive patient-professional interactions were entered into the equation, they not only were related to patients' well-being (p ≤ 0.001) but also mediated the relationship between the quality of care and well-being. More productive patient-professional interactions were related to better well-being at T2 (B = 0.11), assuming that all other factors in the model remained constant. Productive patient-professional interactions are associated with chronically ill patients' well-being over time and mediate the relationship between well-being and quality of care. Improvement of the quality of chronic care delivery should always be accompanied by investment in the quality of relationships and communication between patients and professionals.

[Correlation between physical characteristics of sticks and quality of traditional Chinese medicine pills prepared by plastic molded method].

PubMed

Wang, Ling; Xian, Jiechen; Hong, Yanlong; Lin, Xiao; Feng, Yi

2012-05-01

To quantify the physical characteristics of sticks of traditional Chinese medicine (TCM) honeyed pills prepared by the plastic molded method and the correlation of adhesiveness and plasticity-related parameters of sticks and quality of pills, in order to find major parameters and the appropriate range impacting pill quality. Sticks were detected by texture analyzer for their physical characteristic parameters such as hardness and compression action, and pills were observed by visual evaluation for their quality. The correlation of both data was determined by the stepwise discriminant analysis. Stick physical characteristic parameter l(CD) can exactly depict the adhesiveness, with the discriminant equation of Y0 - Y1 = 6.415 - 41.594l(CD). When Y0 < Y1, pills were scattered well; when Y0 > Y1, pills were adhesive with each other. Pills' physical characteristic parameters l(CD) and l(AC), Ar, Tr can exactly depict smoothness of pills, with the discriminant equation of Z0 - Z1 = -195.318 + 78.79l(AC) - 3 258. 982Ar + 3437.935Tr. When Z0 < Z1, pills were smooth on surface. When Z0 > Z1, pills were rough on surface. The stepwise discriminant analysis is made to show the obvious correlation between key physical characteristic parameters l(CD) and l(AC), Ar, Tr of sticks and appearance quality of pills, defining the molding process for preparing pills by the plastic molded and qualifying ranges of key physical characteristic parameters characterizing intermediate sticks, in order to provide theoretical basis for prescription screening and technical parameter adjustment for pills.

Trainee Characteristics and Perceptions of HIV/AIDS Training Quality.

ERIC Educational Resources Information Center

Panter, A. T.; Huba, G. J.; Melchior, Lisa A.; Anderson, Donna; Driscoll, Mary; German, Victor F.; Henderson, Harold; Henderson, Ron; Lalonde, Bernadette; Uldall, Karnina K.; Zalumas, Jacqueline

2000-01-01

Reports findings from 7 HIV/AIDS education and training projects involving more than 600 training sessions. Trainee characteristics were related to their assessments of training quality, using a regression decision-tree analytic approach. Discusses implications for curriculum development. (SLD)

An Investigation of Single- and Dual-Rotation Propellers at Positive and Negative Thrust, and in Combination with an NACA 1-series D-Type Cowling at Mach Numbers up to 0.84

NASA Technical Reports Server (NTRS)

Reynolds, Robert M; Samonds, Robert I; Walker, John H

1957-01-01

An investigation has been made to determine the aerodynamic characteristics of the NACA 4-(5)(05)-041 four-blade, single-relation propeller and the NACA 4-(5)(05)-037 six- and eight-blade, dual-rotation propellers in combination with various spinners and NACA d-type spinner-cowling combinations at Mach numbers up to 0.84. Propeller force characteristics, local velocity distributions in the propeller planes, inlet pressure recoveries, and static-pressure distributions on the cowling surfaces were measured for a wide range of blade angles, advance ratios, and inlet-velocity ratios. Included are data showing: (a) the effect of extended cylindrical spinners on the characteristics of the single-rotation propeller, (b) the effect of variation of the difference in blade angle setting between the front and rear components of the dual-rotation propellers, (c) the negative- and static-thrust characteristics of the propellers with 1 series spinners, and (d) the effects of ideal- and platform-type propeller-spinner junctures on the pressure-recovery characteristics of the single-rotation propeller-spinner-cowling combination.

Sleep and Mood During A Winter in Antarctica

NASA Technical Reports Server (NTRS)

Palinkas, Lawrence A.; Houseal, Matt; Miller, Christopher

2000-01-01

Seasonal variations in sleep characteristics and their association with changes in mood were examined in 91 American men and women also who spent the 1991 austral winter at three different research stations in Antarctica. Measures of total hours of sleep over a 24-hr period, duration of longest (i.e.,"nighttime") sleep event, number of sleep events, time of sleep onset, and quality of sleep remained unchanged over the course of the austral winter (March through October). However, exposure to total darkness based on station latitude was significantly associated with total hours of sleep, duration of are longest sleep event, time of sleep onset, and quality of sleep. Reported vigor the previous month was a significant independent predictor of changes in all five sleep measures; previous month's measures of all six POMS subscales were significant independent predictors of sleep quality. Sleep characteristics were significant independent predictors of vigor and confusion the following month; total sleep, longest sleep event, sleep onset and sleep quality were significant independent predictors of tension-anxiety and depression. Changes in mood during the austral winter are preceded by changes in sleep characteristics, but prolonged exposure to the photoperiodicity characteristic of the high latitudes appears to be associated with improved sleep. In turn, mood changes appear to affect certain sleep characteristics, especially sleep quality.

Effect of dark, hard, and vitreous kernel content on protein molecular weight distribution and on milling and breadmaking quality characteristics for hard spring wheat samples from diverse growing regions

USDA-ARS?s Scientific Manuscript database

Kernel vitreousness is an important grading characteristic for segregation of sub-classes of hard red spring (HRS) wheat in the U.S. This research investigated the protein molecular weight distribution (MWD), and flour and baking quality characteristics of different HRS wheat market sub-classes. T...

PROTECTING HEALTH WITH SAME DAY WATER QUALITY MONITORING RESULTS FOR BATHING BEACHES

EPA Science Inventory

Current US Environmental Protection Agency guidelines recommend the use of cultural methods for E. coli and enterococci to monitor beach water quality. The guidelines recommend a single sample value or a geometric mean value from at least five samples. The single sample guideli...

Quality of outpatient clinical notes: a stakeholder definition derived through qualitative research.

PubMed

Hanson, Janice L; Stephens, Mark B; Pangaro, Louis N; Gimbel, Ronald W

2012-11-19

There are no empirically-grounded criteria or tools to define or benchmark the quality of outpatient clinical documentation. Outpatient clinical notes document care, communicate treatment plans and support patient safety, medical education, medico-legal investigations and reimbursement. Accurately describing and assessing quality of clinical documentation is a necessary improvement in an increasingly team-based healthcare delivery system. In this paper we describe the quality of outpatient clinical notes from the perspective of multiple stakeholders. Using purposeful sampling for maximum diversity, we conducted focus groups and individual interviews with clinicians, nursing and ancillary staff, patients, and healthcare administrators at six federal health care facilities between 2009 and 2011. All sessions were audio-recorded, transcribed and qualitatively analyzed using open, axial and selective coding. The 163 participants included 61 clinicians, 52 nurse/ancillary staff, 31 patients and 19 administrative staff. Three organizing themes emerged: 1) characteristics of quality in clinical notes, 2) desired elements within the clinical notes and 3) system supports to improve the quality of clinical notes. We identified 11 codes to describe characteristics of clinical notes, 20 codes to describe desired elements in quality clinical notes and 11 codes to describe clinical system elements that support quality when writing clinical notes. While there was substantial overlap between the aspects of quality described by the four stakeholder groups, only clinicians and administrators identified ease of translation into billing codes as an important characteristic of a quality note. Only patients rated prioritization of their medical problems as an aspect of quality. Nurses included care and education delivered to the patient, information added by the patient, interdisciplinary information, and infection alerts as important content. Perspectives of these four stakeholder groups provide a comprehensive description of quality in outpatient clinical documentation. The resulting description of characteristics and content necessary for quality notes provides a research-based foundation for assessing the quality of clinical documentation in outpatient health care settings.

Gender differences in job quality and job satisfaction among doctors in rural western China.

PubMed

Miao, Yang; Li, Lingui; Bian, Ying

2017-12-28

Few studies about gender differences in job quality and job satisfaction among medical professionals have been carried out in China. So the objectives of this study were to examine whether and to what extent gender differences existed in job quality and job satisfaction of doctors in rural western China. From 2009 to 2011, a total of 1472 doctors from 103 selected county-level health care facilities in rural western China were recruited into the study. Information about the doctors' demographic characteristics, job quality, and job satisfaction was collected through a designed questionnaire. Besides examining gender differences in single dimensions of job quality and job satisfaction, principal component analysis was used to construct a composite job quality index to measure the differences in the comprehensive job quality, and exploratory factor analysis was applied to evaluate the differences in the overall job satisfaction. Chi-square test was used to calculate differences between proportions, and t-test was used to compare differences between means. Among the doctors, there were 705 males and 767 females (ratio 1:1.09). Male doctors had significantly higher monthly salaries, longer working hours, more times of night shifts per month, longer continuous working hours, and longer years of service at current facilities, and marginally significantly higher hourly wage and longer years of service in current professions. However, female doctors showed greater overall job qualities. Significant and marginally significant gender differences were only found in satisfaction with remuneration compared to workload, the chance of promotion and working environment. But female showed greater satisfaction in the overall job satisfaction and the factor including sub-aspects of working environment, remuneration compared to workload, the chance of promotion, utilization of subjective initiative, and sense of achievement. Gender differences in job quality and job satisfaction did exist among doctors in rural western China. The participating female doctors were shown to have better job quality and greater job satisfaction.

A residency clinic chronic condition management quality improvement project.

PubMed

Halverson, Larry W; Sontheimer, Dan; Duvall, Sharon

2007-02-01

Quality improvement in chronic disease management is a major agenda for improving health and reducing health care costs. A six-component chronic disease management model can help guide this effort. Several characteristics of the "new model" of family medicine described by the Future of Family Medicine (FFM) Project Leadership Committee are promulgated to foster practice changes that improve quality. Our objective was to implement and assess a quality improvement project guided by the components of a chronic disease management model and FFM new model characteristics. Diabetes was selected as a model chronic disease focus. Multiple practice changes were implemented. A mature electronic medical record facilitated data collection and measurement of quality improvement progress. Data from the diabetes registry demonstrates that our efforts have been effective. Significant improvement occurred in five out of six quality indicators. Multidisciplinary teamwork in a model residency practice guided by chronic disease management principles and the FFM new model characteristics can produce significant management improvements in one important chronic disease.

Rating the methodological quality of single-subject designs and n-of-1 trials: introducing the Single-Case Experimental Design (SCED) Scale.

PubMed

Tate, Robyn L; McDonald, Skye; Perdices, Michael; Togher, Leanne; Schultz, Regina; Savage, Sharon

2008-08-01

Rating scales that assess methodological quality of clinical trials provide a means to critically appraise the literature. Scales are currently available to rate randomised and non-randomised controlled trials, but there are none that assess single-subject designs. The Single-Case Experimental Design (SCED) Scale was developed for this purpose and evaluated for reliability. Six clinical researchers who were trained and experienced in rating methodological quality of clinical trials developed the scale and participated in reliability studies. The SCED Scale is an 11-item rating scale for single-subject designs, of which 10 items are used to assess methodological quality and use of statistical analysis. The scale was developed and refined over a 3-year period. Content validity was addressed by identifying items to reduce the main sources of bias in single-case methodology as stipulated by authorities in the field, which were empirically tested against 85 published reports. Inter-rater reliability was assessed using a random sample of 20/312 single-subject reports archived in the Psychological Database of Brain Impairment Treatment Efficacy (PsycBITE). Inter-rater reliability for the total score was excellent, both for individual raters (overall ICC = 0.84; 95% confidence interval 0.73-0.92) and for consensus ratings between pairs of raters (overall ICC = 0.88; 95% confidence interval 0.78-0.95). Item reliability was fair to excellent for consensus ratings between pairs of raters (range k = 0.48 to 1.00). The results were replicated with two independent novice raters who were trained in the use of the scale (ICC = 0.88, 95% confidence interval 0.73-0.95). The SCED Scale thus provides a brief and valid evaluation of methodological quality of single-subject designs, with the total score demonstrating excellent inter-rater reliability using both individual and consensus ratings. Items from the scale can also be used as a checklist in the design, reporting and critical appraisal of single-subject designs, thereby assisting to improve standards of single-case methodology.

Effect of Chicory Fiber and Smoking on Quality Characteristics of Restructured Sausages

PubMed Central

Choi, Hyun-Su; Choi, Hyung-Gyu; Choi, Yeong-Seok; Kim, Jong-Hee; Lee, Ju-Ho; Jung, Eun-Hee; Lee, Sang-Hwa; Choi, Yang-Il

2016-01-01

This study was conducted to investigate the effects of chicory fiber for the replacement of fat and smoking on quality characteristics of restructured sausages. Treatments were as follows; Control: Pork backfat 20%, T1: Pork backfat 10% + Chicory fiber 10%, T2: Control + Smoking, T3: T1 + Smoking. The addition of chicory fiber significantly reduced the moisture, fat, hardness and pH values, whereas the smoking treatment increased the fat, redness and pH values of restructured sausages (p<0.01). Additionally, interaction of them significantly affected the ash, chewiness and hardness values of restructured sausages. As a result, although the addition of chicory fiber decreased the quality characteristics of sausage, smoking treatment improved the reduced quality. Therefore, the chicory fiber and smoking treatment is helpful to develop restructured sausage products with reduced fat and compensated quality. PMID:27499674

Single-Family Quality Control Inspector Job Task Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Head, Heather R; Kurnik, Charles W

The National Renewable Energy Laboratory (NREL) is contracted by the U.S. Department of Energy (DOE) Weatherization Assistance Program (WAP) to develop and maintain the resources under the Guidelines for Home Energy Professionals (GHEP) project. As part of the GHEP strategy to increase the quality of work conducted for single-family, residential energy-efficiency retrofits, the Home Energy Professionals Job Task Analysis are used as the foundation for quality training programs and trainers.

Yeast-Leavened Laminated Salty Baked Goods: Flour and Dough Properties and Their Relationship with Product Technological Quality

PubMed Central

de la Horra, Ana E.; Steffolani, María Eugenia; Barrera, Gabriela N.; Ribotta, Pablo D.

2015-01-01

Summary The effect of protein composition and content on the characteristics and properties of laminated baked products has been studied for a long time. However, there are no flour quality parameters related to its suitability to produce yeast-leavened laminated salty baked products. The relationships among flour characteristics, laminated dough pieces and baked products were studied in order to establish flour quality parameters and help predict the quality of the products. Yeast-leavened salty laminated products made with hard wheat flour had better quality properties than the products made with soft wheat flour. Hydrophilic components and a high gluten network quality are responsible for the generation of a rigid structure and viscous dough. Consequently, during baking, the dough rises rather than extends laterally and does not experience any change in the expected shape. Among the analysed flour characteristics, glutenin macropolymer content, lactic acid and sodium carbonate solvent retention capacities together with dough viscosity and resistance to deformation were the variables which influenced the most the quality of yeast-leavened salty laminated products. PMID:27904379

Yeast-Leavened Laminated Salty Baked Goods: Flour and Dough Properties and Their Relationship with Product Technological Quality.

PubMed

de la Horra, Ana E; Steffolani, María Eugenia; Barrera, Gabriela N; Ribotta, Pablo D; León, Alberto E

2015-12-01

The effect of protein composition and content on the characteristics and properties of laminated baked products has been studied for a long time. However, there are no flour quality parameters related to its suitability to produce yeast-leavened laminated salty baked products. The relationships among flour characteristics, laminated dough pieces and baked products were studied in order to establish flour quality parameters and help predict the quality of the products. Yeast-leavened salty laminated products made with hard wheat flour had better quality properties than the products made with soft wheat flour. Hydrophilic components and a high gluten network quality are responsible for the generation of a rigid structure and viscous dough. Consequently, during baking, the dough rises rather than extends laterally and does not experience any change in the expected shape. Among the analysed flour characteristics, glutenin macropolymer content, lactic acid and sodium carbonate solvent retention capacities together with dough viscosity and resistance to deformation were the variables which influenced the most the quality of yeast-leavened salty laminated products.

In Flight Evaluation of Active Inceptor Force-Feel Characteristics and Handling Qualities

NASA Technical Reports Server (NTRS)

Lusardi, Jeff A.; Blanken, Chris L.; Ott, Carl Raymond; Malpica, Carlos A.; von Gruenhagen, Wolfgang

2012-01-01

The effect of inceptor feel-system characteristics on piloted handling qualities has been a research topic of interest for many years. Most of the research efforts have focused on advanced fly-by-wire fixed-wing aircraft with only a few studies investigating the effects on rotorcraft. Consequently, only limited guidance is available on how cyclic force-feel characteristics should be set to obtain optimal handling qualities for rotorcraft. To study this effect, the U.S. Army Aeroflightdynamics Directorate working with the DLR Institute of Flight Systems in Germany under Task X of the U.S. German Memorandum of Understanding have been conducting flight test evaluations. In the U.S., five experimental test pilots have completed evaluations of two Mission Task Elements (MTEs) from ADS-33E-PRF and two command/response types for a matrix of center-stick cyclic force-feel characteristics at Moffett Field. In Germany, three experimental test Pilots have conducted initial evaluations of the two MTEs with two command/response types for a parallel matrix of side-stick cyclic force-feel characteristics at WTD-61 in Manching. The resulting data set is used to correlate the effect of changes in natural frequency and damping ratio of the cyclic inceptor on the piloted handling qualities. Existing criteria in ADS-33E and a proposed Handling Qualities Sensitivity Function that includes the effects of the cyclic force-feel characteristics are also evaluated against the data set and discussed.

How does the environment impact on the quality of life of advanced cancer patients? A qualitative study with implications for ward design.

PubMed

Rowlands, J; Noble, S

2008-09-01

It is well recognized that the ward environment has an effect on patients' quality of life and may, therefore, impact on the quality of end of life care. The body of evidence that informs ward design policy recommends single-bedded rooms on grounds of reduced infection risk, noise and versatility. Considering the majority of anticipated patient deaths occurring in hospitals, the quality of life aspects of ward design should also be considered. The aim of this study is to explore the views of patients with advanced cancer on the effect the ward environment has on their overall well-being. Semi-structured interviews exploring the experiences of 12 inpatients at a regional cancer centre were recorded and transcribed verbatim. Transcripts were analysed for emerging themes until theoretical saturation. Four major themes emerged: staff behaviours, the immediate environment, single vs. multi-bedded rooms and contact with the outside environment. The attitude, competence and helpfulness of the staff creates the atmosphere of the ward regardless of layout, furnishings, equipment and décor. The majority of the patients in this study expressed a strong preference for a multi-bedded room when they were well enough to interact and a single cubicle when they were very ill or dying, which opposes the current advice for building new hospitals with all single rooms. Although the current policy recommends the use of single-bedded rooms, this study suggests the need for a mix of multi-bedded wards and single rooms with respect to the impact of the environment on patient quality of life.

Optical reflectance of solution processed quasi-superlattice ZnO and Al-doped ZnO (AZO) channel materials

NASA Astrophysics Data System (ADS)

Buckley, Darragh; McCormack, Robert; O'Dwyer, Colm

2017-04-01

The angle-resolved reflectance of high crystalline quality, c-axis oriented ZnO and AZO single and periodic quasi-superlattice (QSL) spin-coated TFT channels materials are presented. The data is analysed using an adapted model to accurately determine the spectral region for optical thickness and corresponding reflectance. The optical thickness agrees very well with measured thickness of 1-20 layered QSL thin films determined by transmission electron microscopy if the reflectance from lowest interference order is used. Directional reflectance for single layers or homogeneous QSLs of ZnO and AZO channel materials exhibit a consistent degree of anti-reflection characteristics from 30 to 60° (~10-12% reflection) for thickness ranging from ~40 nm to 500 nm. The reflectance of AZO single layer thin films is  <10% from 30 to 75° at 514.5 nm, and  <6% at 632.8 nm from 30-60°. The data show that ZnO and AZO with granular or periodic substructure behave optically as dispersive, continuous thin films of similar thickness, and angle-resolved spectral mapping provides a design rule for transparency or refractive index determination as a function of film thickness, substructure (dispersion) and viewing angle.

Metal-insulator transition characteristics of VO2 thin films grown on Ge(100) single crystals

NASA Astrophysics Data System (ADS)

Yang, Z.; Ko, C.; Ramanathan, S.

2010-10-01

Phase transitions exhibited by correlated oxides could be of potential relevance to the emerging field of oxide electronics. We report on the synthesis of high-quality VO2 thin films grown on single crystal Ge(100) substrates by physical vapor deposition and their metal-insulator transition (MIT) properties. Thermally triggered MIT is demonstrated with nearly three orders of magnitude resistance change across the MIT with transition temperatures of 67 °C (heating) and 61 °C (cooling). Voltage-triggered hysteretic MIT is observed at room temperature at threshold voltage of ˜2.1 V for ˜100 nm thickness VO2 films. Activation energies for electron transport in the insulating and conducting states are obtained from variable temperature resistance measurements. We further compare the properties of VO2 thin films grown under identical conditions on Si(100) single crystals. The VO2 thin films grown on Ge substrate show higher degree of crystallinity, slightly reduced compressive strain, larger resistance change across MIT compared to those grown on Si. Depth-dependent x-ray photoelectron spectroscopy measurements were performed to provide information on compositional variation trends in the two cases. These results suggest Ge could be a suitable substrate for further explorations of switching phenomena and devices for thin film functional oxides.

Splitting livers: Trans-hilar or trans-umbilical division? Technical aspects and comparative outcomes.

PubMed

de Ville de Goyet, J; di Francesco, F; Sottani, V; Grimaldi, C; Tozzi, A E; Monti, L; Muiesan, P

2015-08-01

Controversy remains about the best line of division for liver splitting, through Segment IV or through the umbilical fissure. Both techniques are currently used, with the choice varying between surgical teams in the absence of an evidence-based choice. We conducted a single-center retrospective analysis of 47 left split liver grafts that were procured with two different division techniques: "classical" (N = 28, Group A) or through the umbilical fissure and plate (N = 19, Group B). The allocation of recipients to each group was at random; a single transplant team performed all transplantations. Demographics, characteristics, technical aspects, and outcomes were similar in both groups. The grafts in Group A, prepared with the classical technique, were procured more often with a single BD orifice compared with the grafts in Group B; however, this was not associated with a higher incidence of biliary problems in this series of transplants (96% actual graft survival rate [median ± s.d. 26 ± 20 months]). Both techniques provide good quality split grafts and an excellent outcome; surgical expertise with a given technique is more relevant than the technique itself. The classical technique, however, seems to be more flexible in various ways, and surgeons may find it to be preferable. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Predicting optical and thermal characteristics of transparent single-glazed domed skylights

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laouadi, A.; Atif, M.R.

1999-07-01

Optical and thermal characteristics of domed skylights are important to solve the trade-off between daylighting and thermal design. However, there is a lack of daylighting and thermal design tools for domed skylights. Optical and thermal characteristics of transparent single-glazed hemispherical domed skylights under sun and sky light are evaluated based on an optical model for domed skylights. The optical model is based on tracing the beam and diffuse radiation transmission through the dome surface. A simple method is proposed to replace single-glazed hemispherical domed skylights by optically and thermally equivalent single-glazed planar skylights to accommodate limitations of energy computer programs.more » Under sunlight, single-glazed hemispherical domed skylights yield slightly lower equivalent solar transmittance and solar heat gain coefficient (SHGC) at near normal zenith angles than those of single-glazed planar skylights. However, single-glazed hemispherical domed skylights yield substantially higher equivalent solar transmittance and SHGC at high zenith angles and around the horizon. Under isotropic skylight, single-glazed hemispherical domed skylights yield slightly lower equivalent solar transmittance and SHGC than those of single-glazed planar skylights. Daily solar heat gains of single-glazed hemispherical domed skylights are higher than those of single-glazed horizontal planar skylights in both winter and summer. In summer, the solar heat gain of single-glazed hemispherical domed skylights can reach 3% to 9% higher than those of horizontal single-glazed planar skylights for latitudes varying between 0 and 55{degree} (north/south). In winter, however, the solar heat gains of single-glazed hemispherical domed skylights increase significantly with the increase of the site latitude and can reach 232% higher than those of horizontal single-glazed planar skylights, particularly for high latitude countries.« less

Uncertainty in air quality observations using low-cost sensors

NASA Astrophysics Data System (ADS)

Castell, Nuria; Dauge, Franck R.; Dongol, Rozina; Vogt, Matthias; Schneider, Philipp

2016-04-01

Air pollution poses a threat to human health, and the WHO has classified air pollution as the world's largest single environmental health risk. In Europe, the majority of the population lives in areas where air quality levels frequently exceed WHO's ambient air quality guidelines. The emergence of low-cost, user-friendly and very compact air pollution platforms allowing observations at high spatial resolution in near real-time, provides us with new opportunities to simultaneously enhance existing monitoring systems as well as enable citizens to engage in more active environmental monitoring (citizen science). However the data sets generated by low-cost sensors show often questionable data quality. For many sensors, neither their error characteristics nor how their measurement capability holds up over time or through a range of environmental conditions, have been evaluated. We have conducted an exhaustive evaluation of the commercial low-cost platform AQMesh (measuring NO, NO2, CO, O3, PM10 and PM2.5) in laboratory and in real-world conditions in the city of Oslo (Norway). Co-locations in field of 24 platforms were conducted over a 6 month period (April to September 2015) allowing to characterize the temporal variability in the performance. Additionally, the field performance included the characterization on different monitoring urban monitoring sites characteristic of both traffic and background conditions. All the evaluations have been conducted against CEN reference method analyzers maintained according to the Norwegian National Reference Laboratory quality system. The results show clearly that a good performance in laboratory does not imply similar performance in real-world outdoor conditions. Moreover, laboratory calibration is not suitable for subsequent measurements in urban environments. In order to reduce the errors, sensors require on-site field calibration. Even after such field calibration, the platforms show a significant variability in the performance due to changes in the environmental conditions. Currently there is a lack of testing to ensure adequate sensor performance prior to marketing such instruments. Even when manufacturers provide detailed specification sheets, there is little guarantee that the specifications can actually be met in real-world conditions. Data quality is a pertinent concern, especially when citizens are collecting and interpreting the data by themselves. Poor or unknown data quality can lead to incorrect or inappropriate decisions. We present the experiences gained within the EU project CITI-SENSE, where low-cost sensors are one of the tools employed to empower citizens in air quality issues.

An Experimental Investigation of the Effect of Propellers Used as Aerodynamic Brakes on Stability and Control

NASA Technical Reports Server (NTRS)

Hanson, Frederick H

1945-01-01

Tests were made of a model representative of a single-engine tractor-type airplane for the purpose of determining the stability and control effects of a propeller used as an aerodynamic brake. The tests were made with single-and dual-rotation propellers to show the effect of type of propeller rotation, and with positive thrust to provide basic data with which to compare the effects of negative thrust. Four configurations of the model were used to give the effects of tilting the propeller thrust axis down 5 deg., raising the horizontal tail, and combining both tilt and raised tail. Results of the tests are reported herein. The effects of negative thrust were found to be significant. The longitudinal stability was increased because of the loss of wing lift and increase of the angle of attack of the tail. Directional stability and both longitudinal and directional control were decreased because of the reduced velocity at the tail. These effects are moderate for moderate braking but become pronounced with full-power braking, particularly at high values of lift coefficient. The effects of model configuration changes were small when compared with the over-all effects of negative-thrust operation; however, improved stability and control characteristics were exhibited by the model with the tilted thrust axis. Raising the horizontal tail improved the longitudinal characteristics, but was detrimental to directional characteristics. The use of dual-rotation propeller reduced the directional trim charges resulting from the braking operation. A prototype airplane was assumed and handling qualities were computed and analyzed for normal (positive thrust) and braking operation with full and partial power. The results of these analyses are presented for the longitudinal characteristics in steady and accelerated flight, and for the directional characteristics in high- and low-speed flight. It was found that by limiting the power output of the engine (assuming the constant-speed propeller will function in the range of blade angles required for negative thrust) the stability and control characteristics may be held within the limits required for safe operation. Braking with full power, particularly at low speeds, is dangerous, but braking with very small power output is satisfactory from the standpoint of control. The amount of braking produced with zero power output is equal to or better than that produced by conventional spoiler-type brakes.

Selection of Collision Energies in Proteomics Mass Spectrometry Experiments for Best Peptide Identification: Study of Mascot Score Energy Dependence Reveals Double Optimum.

PubMed

Révész, Ágnes; Rokob, Tibor András; Jeanne Dit Fouque, Dany; Turiák, Lilla; Memboeuf, Antony; Vékey, Károly; Drahos, László

2018-05-04

Collision energy is a key parameter determining the information content of beam-type collision induced dissociation tandem mass spectrometry (MS/MS) spectra, and its optimal choice largely affects successful peptide and protein identification in MS-based proteomics. For an MS/MS spectrum, quality of peptide match based on sequence database search, often characterized in terms of a single score, is a complex function of spectrum characteristics, and its collision energy dependence has remained largely unexplored. We carried out electrospray ionization-quadrupole-time of flight (ESI-Q-TOF)-MS/MS measurements on 2807 peptides from tryptic digests of HeLa and E. coli at 21 different collision energies. Agglomerative clustering of the resulting Mascot score versus energy curves revealed that only few of them display a single, well-defined maximum; rather, they feature either a broad plateau or two clear peaks. Nonlinear least-squares fitting of one or two Gaussian functions allowed the characteristic energies to be determined. We found that the double peaks and the plateaus in Mascot score can be associated with the different energy dependence of b- and y-type fragment ion intensities. We determined that the energies for optimum Mascot scores follow separate linear trends for the unimodal and bimodal cases with rather large residual variance even after differences in proton mobility are taken into account. This leaves room for experiment optimization and points to the possible influence of further factors beyond m/ z.

Flight Measurements of the Flying Qualities of a Lockheed P-80A Airplane (Army No. 44-85099) - Stalling Characteristics

NASA Technical Reports Server (NTRS)

Anderson, Seth B.; Cooper, George E.

1947-01-01

This report contains the flight-test results of the stalling characteristics measured during the flying-qualities investigation of the Lockheed P-8OA airplane (Army No. 44-85099). The tests were conducted in straight and turning flight with and without wing-tip tanks. These tests showed satisfactory stalling characteristics and adequate stall warning for all configurations and conditions tested.

The role of landscape characteristics for forage maturation and nutritional benefits of migration in red deer.

PubMed

Mysterud, Atle; Vike, Brit Karen; Meisingset, Erling L; Rivrud, Inger Maren

2017-06-01

Large herbivores gain nutritional benefits from following the sequential flush of newly emergent, high-quality forage along environmental gradients in the landscape, termed green wave surfing. Which landscape characteristics underlie the environmental gradient causing the green wave and to what extent landscape characteristics alone explain individual variation in nutritional benefits remain unresolved questions. Here, we combine GPS data from 346 red deer ( Cervus elaphus ) from four partially migratory populations in Norway with the satellite-derived normalized difference vegetation index (NDVI), an index of plant phenology. We quantify whether migratory deer had access to higher quality forage than resident deer, how landscape characteristics within summer home ranges affected nutritional benefits, and whether differences in landscape characteristics could explain differences in nutritional gain between migratory and resident deer. We found that migratory red deer gained access to higher quality forage than resident deer but that this difference persisted even after controlling for landscape characteristics within the summer home ranges. There was a positive effect of elevation on access to high-quality forage, but only for migratory deer. We discuss how the landscape an ungulate inhabits may determine its responses to plant phenology and also highlight how individual behavior may influence nutritional gain beyond the effect of landscape.

An integrative review of health-related quality of life in patients with critical limb ischaemia.

PubMed

Monaro, Susan; West, Sandra; Gullick, Janice

2017-10-01

To examine the domains and the domain-specific characteristics within a peripheral arterial disease health-related quality of life framework for their usefulness in defining critical limb ischaemia health-related quality of life. Critical Limb Ischaemia presents a highly individualised set of personal and health circumstances. Treatment options include conservative management, revascularisation or amputation. However, the links between treatment decisions and quality of life require further investigation. The framework for this integrative review was the peripheral arterial disease-specific health-related quality of life domains identified by Treat-Jacobson et al. The literature expanded and refined Treat-Jacobson's framework by modifying the characteristics to better describe health-related quality of life in critical limb ischaemia. Given that critical limb ischaemia is a highly individualised situation with powerful health-related quality of life implications, further research focusing on patient and family-centred decision-making relating to therapeutic options and advanced care planning is required. A critical limb ischaemia-specific, health-related quality of life tool is required to capture both the unique characteristics of this disorder, and the outcomes for active or conservative care among this complex group of patients. © 2016 John Wiley & Sons Ltd.

Temporal and spatial evolution characteristics of water environment quality in Heze

NASA Astrophysics Data System (ADS)

Gao, Qian; Zhao, Qiang; Li, Xiumei

2018-06-01

The evolution of water environment is relatively complicated. The study of its characteristics is helpful to grasp the general direction of spatial and temporal evolution of water environment in Heze city, and to carry out water resources development and water environment protection more rationally. The comprehensive pollution index method for calculation, and the observed data are handled by Excel. In order to facilitate the analysis of the basin, Arcgis is utilized to map the watershed map. In addition, for the spatial evolution, surfer12 is used to analyze the spatial evolution characteristics the spatial evolution, and to draw the pictures of spatial evolution of chemical oxygen demand and water quality evolution. The study shows that: (1) In Heze, the quality of water environment has been improved year by year from 2006 to 2013. In 2014, the water environment has deteriorated. The content of volatile phenol has increased greatly, and the evolution trend of COD is close to the trend of the comprehensive pollution index. (2) In terms of Spatial state of water environment, the water quality of Zhuzhao New River and Wanfu River is poor, and Dongyu River water quality is better. Zhuzhao New River and Wanfu River water qualityis often worse than grade V or V, and Dongyu River water quality is mostly maintained in the grade Ⅳ. Through the analysis on the spatial revolution characteristics of water quality and chemical oxygen demand(COD),as a result, water quality is poor in the northern region,and the water quality in the southern region is better in Heze. Although the water quality has changed in recent years, the overall pattern is relatively stable.

Evaluation of the functional performance and technical quality of an Electronic Documentation System of the Nursing Process.

PubMed

de Oliveira, Neurilene Batista; Peres, Heloisa Helena Ciqueto

2015-01-01

To evaluate the functional performance and the technical quality of the Electronic Documentation System of the Nursing Process of the Teaching Hospital of the University of São Paulo. exploratory-descriptive study. The Quality Model of regulatory standard 25010 and the Evaluation Process defined under regulatory standard 25040, both of the International Organization for Standardization/International Electrotechnical Commission. The quality characteristics evaluated were: functional suitability, reliability, usability, performance efficiency, compatibility, security, maintainability and portability. The sample was made up of 37 evaluators. in the evaluation of the specialists in information technology, only the characteristic of usability obtained a rate of positive responses of less than 70%. For the nurse lecturers, all the quality characteristics obtained a rate of positive responses of over 70%. The staff nurses of the medical and surgical clinics with experience in using the system) and staff nurses from other units of the hospital and from other health institutions (without experience in using the system) obtained rates of positive responses of more than 70% referent to the functional suitability, usability, and security. However, performance efficiency, reliability and compatibility all obtained rates below the parameter established. the software achieved rates of positive responses of over 70% for the majority of the quality characteristics evaluated.

A head-mounted compressive three-dimensional display system with polarization-dependent focus switching

NASA Astrophysics Data System (ADS)

Lee, Chang-Kun; Moon, Seokil; Lee, Byounghyo; Jeong, Youngmo; Lee, Byoungho

2016-10-01

A head-mounted compressive three-dimensional (3D) display system is proposed by combining polarization beam splitter (PBS), fast switching polarization rotator and micro display with high pixel density. According to the polarization state of the image controlled by polarization rotator, optical path of image in the PBS can be divided into transmitted and reflected components. Since optical paths of each image are spatially separated, it is possible to independently focus both images at different depth positions. Transmitted p-polarized and reflected s-polarized images can be focused by convex lens and mirror, respectively. When the focal lengths of the convex lens and mirror are properly determined, two image planes can be located in intended positions. The geometrical relationship is easily modulated by replacement of the components. The fast switching of polarization realizes the real-time operation of multi-focal image planes with a single display panel. Since it is possible to conserve the device characteristic of single panel, the high image quality, reliability and uniformity can be retained. For generating 3D images, layer images for compressive light field display between two image planes are calculated. Since the display panel with high pixel density is adopted, high quality 3D images are reconstructed. In addition, image degradation by diffraction between physically stacked display panels can be mitigated. Simple optical configuration of the proposed system is implemented and the feasibility of the proposed method is verified through experiments.

Improving the beam quality of high-power laser diodes by introducing lateral periodicity into waveguides

NASA Astrophysics Data System (ADS)

Sobczak, Grzegorz; DÄ browska, ElŻbieta; Teodorczyk, Marian; Kalbarczyk, Joanna; MalÄ g, Andrzej

2013-01-01

Low quality of the optical beam emitted by high-power laser diodes is the main disadvantage of these devices. The two most important reasons are highly non-Gaussian beam profile with relatively wide divergence in the junction plane and the filamentation effect. Designing laser diode as an array of narrow, close to each other single-mode waveguides is one of the solutions to this problem. In such devices called phase locked arrays (PLA) there is no room for filaments formation. The consequence of optical coupling of many single-mode waveguides is the device emission in the form of few almost diffraction limited beams. Because of losses in regions between active stripes the PLA devices have, however, somewhat higher threshold current and lower slope efficiencies compared to wide-stripe devices of similar geometry. In this work the concept of the high-power laser diode resonator consisted of joined PLA and wide stripe segments is proposed. Resulting changes of electro-optical characteristics of PLA are discussed. The devices are based on the asymmetric heterostructure designed for improvement of the catastrophic optical damage threshold as well as thermal and electrical resistances. Due to reduced distance from the active layer to surface in this heterostructure, better stability of current (and gain) distribution with changing drive level is expected. This could lead to better stability of optical field distribution and supermodes control. The beam divergence reduction in the direction perpendicular of the junction plane has been also achieved.

Force Induced Globule-to-Coil Transition of Single Polymer Chains.

NASA Astrophysics Data System (ADS)

Gunari, Nikhil; Walker, Gilbert

2008-03-01

Force induced structural transitions of individual homopolymer chains have been studied in different solvent conditions using single molecule force spectroscopy. Single molecule mechanics in the ``fly-fishing'' mode showed a first-order like transition for polystyrene (PS) in water exhibiting a characteristic three regime force extension curve. In contrast, poly methylmethacrylate (PMMA) showed a characteristic saw-tooth pattern reminiscent of multidomain disassembly behavior similar to that seen in modular protein mechanics. The plateau force for PS and the saw-tooth pattern for PMMA disappear when measured in aqueous guanidine hydrochloride solution and in other non-solvents showing that the characteristic deformational behavior observed for the two polymers in water may be due to hydrophobic interactions .

Thermal and storage characteristics of tomato seed oil

USDA-ARS?s Scientific Manuscript database

Thermal oxidative stability and effect of different storage conditions on quality characteristics of tomato seed oil have not been studied. The objectives of this research were to determine the changes in quality and oxidative stability of tomato seed oil, including color, antioxidant activity, per...

Bran characteristics and bread-baking quality of whole grain wheat flour

USDA-ARS?s Scientific Manuscript database

Varietal variations in physical and compositional characteristics of bran and their associations with bread-baking quality of whole grain wheat flour (WWF) were investigated using bran obtained from roller milling of 18 wheat varieties. Bran was characterized for composition including protein, fat, ...

Assessment of spatial and physical neighborhood characteristics that influence sound quality and herewith well-being and health

PubMed Central

Devilee, Jeroen; van Kempen, Elise; Swart, Wim; van Kamp, Irene; Ameling, Caroline

2017-01-01

Environmental noise and health studies seldom address the positive effect of environments with high acoustic quality. Sound quality, in turn, is influenced by a large number of factors, including the spatial–physical characteristics of a neighborhood. In general, these characteristics cannot be retrieved from existing databases. In this article, we describe the design of an audit instrument and demonstrate its value for gathering information about these characteristics of neighborhoods. The audit instrument used was derived from research in other fields than environmental health. The instrument was tested in 33 neighborhoods in the Dutch cities of Amsterdam, Rotterdam, and Arnhem. In these neighborhoods, more or less homogeneous subareas were identified that were subject of the audit. The results show that the audit approach is suitable to gather neighborhood data that are relevant for the sound quality of neighborhoods. Together with survey data, they provide information that could further the field of soundscape and health. Several suggestions for improvement of the audit instrument were made. PMID:28615546

Effect of microencapsulated fat powders on rheological characteristics of biscuit dough and quality of biscuits.

PubMed

Sudha, M L; Chetana, R; Reddy, S Yella

2014-12-01

The effect of microencapsulated fat powders on the rheological characteristics and quality of biscuits were studied and compared with the control native fat normally used in the biscuit industry. Commercial bakery fat was encapsulated using sodium caseinate or skimmed milk powder (SMP) and the fat content in the powders was in the range of 73 - 78 % for sodium caseinate, whereas it ranged between 57.5 and 61 % with SMP and the sugar content was in the range of 9.8 - 17.5 %. The rheological characteristics indicated that with high sodium caseinate and SMP, the doughs were more elastic. The TPA analysis showed that with increasing the casein content in the fat powder, the dough hardness increased, and the doughs were less cohesive. The quality of biscuits was comparable with lower amount of encapsulating agents. Powders with lower amount of agents had comparable benefits on the rheological characteristics of the dough and biscuit quality.

Single P-N junction tandem photovoltaic device

DOEpatents

Walukiewicz, Wladyslaw [Kensington, CA; Ager, III, Joel W.; Yu, Kin Man [Lafayette, CA

2012-03-06

A single P-N junction solar cell is provided having two depletion regions for charge separation while allowing the electrons and holes to recombine such that the voltages associated with both depletion regions of the solar cell will add together. The single p-n junction solar cell includes an alloy of either InGaN or InAlN formed on one side of the P-N junction with Si formed on the other side in order to produce characteristics of a two junction (2J) tandem solar cell through only a single P-N junction. A single P-N junction solar cell having tandem solar cell characteristics will achieve power conversion efficiencies exceeding 30%.

Single P-N junction tandem photovoltaic device

DOEpatents

Walukiewicz, Wladyslaw [Kensington, CA; Ager, III, Joel W.; Yu, Kin Man [Lafayette, CA

2011-10-18

A single P-N junction solar cell is provided having two depletion regions for charge separation while allowing the electrons and holes to recombine such that the voltages associated with both depletion regions of the solar cell will add together. The single p-n junction solar cell includes an alloy of either InGaN or InAlN formed on one side of the P-N junction with Si formed on the other side in order to produce characteristics of a two junction (2J) tandem solar cell through only a single P-N junction. A single P-N junction solar cell having tandem solar cell characteristics will achieve power conversion efficiencies exceeding 30%.

[UPLC characteristic chromatographic profile of Poria].

PubMed

Zhang, Qi; Wang, Zhenzhong; Xiao, Wei; Zhang, Liangqi; Bi, Kaishun; Jia, Ying

2012-04-01

To establish a UPLC characteristic chromatographic profile analysis method to quickly assess Poria quality and provide basis fro controlling Poria quality. The UPLC characteristic chromatographic profiles of fifteen batches of Poria were determined by ACQUITY UPLC, with HSS T3 Column (2.1 mm x 100 mm, 1.8 microm) eluted with the mobile phases of water containing 0.05% phosphoric acid and acetonitrile in gradient mode. The detection wavelength was set at 243 nm. The common mode of the UPLC characteristic chromatographic profile was set up. There were 20 common peaks, seven of which were identified, and the similar degrees of the fifteen samples to the common mode were between 0.787 and 0.974. The method was so time-saving that it can be used for the quality control of Poria.

QTL detection for wheat kernel size and quality and the responses of these traits to low nitrogen stress.

PubMed

Cui, Fa; Fan, Xiaoli; Chen, Mei; Zhang, Na; Zhao, Chunhua; Zhang, Wei; Han, Jie; Ji, Jun; Zhao, Xueqiang; Yang, Lijuan; Zhao, Zongwu; Tong, Yiping; Wang, Tao; Li, Junming

2016-03-01

QTLs for kernel characteristics and tolerance to N stress were identified, and the functions of ten known genes with regard to these traits were specified. Kernel size and quality characteristics in wheat (Triticum aestivum L.) ultimately determine the end use of the grain and affect its commodity price, both of which are influenced by the application of nitrogen (N) fertilizer. This study characterized quantitative trait loci (QTLs) for kernel size and quality and examined the responses of these traits to low-N stress using a recombinant inbred line population derived from Kenong 9204 × Jing 411. Phenotypic analyses were conducted in five trials that each included low- and high-N treatments. We identified 109 putative additive QTLs for 11 kernel size and quality characteristics and 49 QTLs for tolerance to N stress, 27 and 14 of which were stable across the tested environments, respectively. These QTLs were distributed across all wheat chromosomes except for chromosomes 3A, 4D, 6D, and 7B. Eleven QTL clusters that simultaneously affected kernel size- and quality-related traits were identified. At nine locations, 25 of the 49 QTLs for N deficiency tolerance coincided with the QTLs for kernel characteristics, indicating their genetic independence. The feasibility of indirect selection of a superior genotype for kernel size and quality under high-N conditions in breeding programs designed for a lower input management system are discussed. In addition, we specified the functions of Glu-A1, Glu-B1, Glu-A3, Glu-B3, TaCwi-A1, TaSus2, TaGS2-D1, PPO-D1, Rht-B1, and Ha with regard to kernel characteristics and the sensitivities of these characteristics to N stress. This study provides useful information for the genetic improvement of wheat kernel size, quality, and resistance to N stress.

Service quality and clinical outcomes: an example from mental health rehabilitation services in England.

PubMed

Killaspy, Helen; Marston, Louise; Omar, Rumana Z; Green, Nicholas; Harrison, Isobel; Lean, Melanie; Holloway, Frank; Craig, Tom; Leavey, Gerard; King, Michael

2013-01-01

Current health policy assumes better quality services lead to better outcomes. To investigate the relationship between quality of mental health rehabilitation services in England, local deprivation, service user characteristics and clinical outcomes. Standardised tools were used to assess the quality of mental health rehabilitation units and service users' autonomy, quality of life, experiences of care and ratings of the therapeutic milieu. Multiple level modelling investigated relationships between service quality, service user characteristics and outcomes. A total of 52/60 (87%) National Health Service trusts participated, comprising 133 units and 739 service users. All aspects of service quality were positively associated with service users' autonomy, experiences of care and therapeutic milieu, but there was no association with quality of life. Quality of care is linked to better clinical outcomes in people with complex and longer-term mental health problems. Thus, investing in quality is likely to show real clinical gains.

[Consumption of medications, alcohol and smoking in pregnancy and assessment of teratogenic risks].

PubMed

Rocha, Rebeca Silveira; Bezerra, Samara Cavalcante; Lima, José Welington de Oliveira; Costa, Fabrício da Silva

2013-06-01

Medications, alcohol and smoking can cause fetal damage. A cross-sectional study was conducted with 326 mothers of the Fortaleza General Hospital to evaluate the use of drugs, alcohol and smoking during pregnancy and its relation to teratogenic potential in different population characteristics, between 2006 and 2007. Postpartum women who had their babies in the research site were included and those whose babies were not admitted as hospital inpatients were excluded. Chi-square tests and t-tests were used in the analysis, with a p value <0.05 considered significant. 96.6% of the mothers took medications (2.8 drugs/ pregnancy) and self-medication occurred in 11.3% of the cases. Single women took more drugs with high teratogenic potential (p=0.037). 11 cases of fetal malformation were observed, five of them were exposed to high teratogenic risks. Smoking occurred in 11.3% and alcohol use in 16%. Being single was found to be a risk factor for exposure to high teratogenic potential. Quality of prenatal care and other sociodemographic variables weren't related to exposure to teratogenic risks.

Performance tests of a two phase ejector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrell, G.S.; Kornhauser, A.A.

1995-12-31

The ejector expansion refrigeration cycle is a modified vapor compression cycle in which a two phase ejector is used to recover a portion of the work otherwise lost in the expansion valve. The ejector improves cycle performance by increasing compressor inlet pressure and by lowering the quality of liquid entering the evaporator. Theoretically, a cooling COP improvement of approximately 23% is achievable for a typical refrigerating cycle and an ideal ejector. If the ejector performed as well as typical single phase ejectors an improvement of 12% could be achieved. Previous tests have demonstrated a smaller 3.7% improvement; the difference ismore » in the poor performance of the two phase ejector. The purpose of this research is to understand the operating characteristics of the two phase ejector and to devise design improvements. A two phase ejector test rig has been constructed and tested. Preliminary data show performance superior to previously tested two phase ejectors, but still inferior to single phase ejectors. Ejector performance corresponds to refrigeration cycle COP improvements ranging from 3.9% to 7.6%.« less

Radiation incident on tilted collectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, P.J.

1981-12-01

For solar energy system design purposes, observations of solar radiation on a horizontal surface must be converted to values on a tilted energy collector. An empirical conversion relationship, introduced by Liu and Jordan (1960) and based on short-term data for a single station, and has been widely adopted throughout the nation. The spatial variations of the coefficients of this relationship and their stability with record length on North Carolina. Minor variations in coefficients result from changes in record length, but the differences have little impact on the design or performance of a solar energy system. Similarly, minor variations occur betweenmore » coastal and inland sites but are insufficient to alter system designs. Hence a single relationship is appropriate for the area investigated. These SOLMET results indicate a greater proportion of direct radiation for a given total horizontal radiation amount than do Collares-Pereira and Rabl (1979), who used short period records from a few widely scattered stations to refine the original national relationship. The difference may reflect variations in data quality or regional differences in atmospheric transmission characteristics.« less

[Primary, single-stage arterial switch operations at a newly-established, comprehensive congenital cardiac center performed in the neonatal age and beyond].

PubMed

Király, László; Tamás, Csaba

2015-06-21

Outcome of arterial switch operation for transposition of the great arteries with/without ventricular septal defect is a service key-performance-indicator. The aim of the authors was to assess patient characteristics and parameters in the perioperative course. In the setting of a newly-established, comprehensive tertiary-care center, primary complete repair was performed including associated anomalies, e.g. transverse arch repairs. Patients with d-transposition were grouped according to coexistence of ventricular septal defect. 118 arterial switch operations were performed between 2007 and 2014 with 96.62% survival (114/118). Ventricular septal defect and repair of associated anomalies did not yield worse outcome. Left ventricular re-training with late presentation necessitated mechanical circulatory support for 4.5±1.5 days. D-transposition is suitable for standardization of clinical algorithm and surgical technique. Quality standards contribute to excellent outcomes, minimize complications, and serve as blueprint for other neonatal open-heart procedures. Availability of mechanical circulatory support is key for single-stage left ventricular re-training beyond the neonatal period.

ICEG2D: An Integrated Software Package for Automated Prediction of Flow Fields for Single-Element Airfoils with Ice Accretion

NASA Technical Reports Server (NTRS)

Thompson, David S.; Soni, Bharat K.

2000-01-01

An integrated software package, ICEG2D, was developed to automate computational fluid dynamics (CFD) simulations for single-element airfoils with ice accretion. ICEG2D is designed to automatically perform three primary functions: (1) generating a grid-ready, surface definition based on the geometrical characteristics of the iced airfoil surface, (2) generating a high-quality grid using the generated surface point distribution, and (3) generating the input and restart files needed to run the general purpose CFD solver NPARC. ICEG2D can be executed in batch mode using a script file or in an interactive mode by entering directives from a command line. This report summarizes activities completed in the first year of a three-year research and development program to address issues related to CFD simulations for aircraft components with ice accretion. Specifically, this document describes the technology employed in the software, the installation procedure, and a description of the operation of the software package. Validation of the geometry and grid generation modules of ICEG2D is also discussed.

An empirical comparison of key statistical attributes among potential ICU quality indicators.

PubMed

Brown, Sydney E S; Ratcliffe, Sarah J; Halpern, Scott D

2014-08-01

Good quality indicators should have face validity, relevance to patients, and be able to be measured reliably. Beyond these general requirements, good quality indicators should also have certain statistical properties, including sufficient variability to identify poor performers, relative insensitivity to severity adjustment, and the ability to capture what providers do rather than patients' characteristics. We assessed the performance of candidate indicators of ICU quality on these criteria. Indicators included ICU readmission, mortality, several length of stay outcomes, and the processes of venous-thromboembolism and stress ulcer prophylaxis provision. Retrospective cohort study. One hundred thirty-eight U.S. ICUs from 2001-2008 in the Project IMPACT database. Two hundred sixty-eight thousand eight hundred twenty-four patients discharged from U.S. ICUs. None. We assessed indicators' (1) variability across ICU-years; (2) degree of influence by patient vs. ICU and hospital characteristics using the Omega statistic; (3) sensitivity to severity adjustment by comparing the area under the receiver operating characteristic curve (AUC) between models including vs. excluding patient variables, and (4) correlation between risk adjusted quality indicators using a Spearman correlation. Large ranges of among-ICU variability were noted for all quality indicators, particularly for prolonged length of stay (4.7-71.3%) and the proportion of patients discharged home (30.6-82.0%), and ICU and hospital characteristics outweighed patient characteristics for stress ulcer prophylaxis (ω, 0.43; 95% CI, 0.34-0.54), venous thromboembolism prophylaxis (ω, 0.57; 95% CI, 0.53-0.61), and ICU readmissions (ω, 0.69; 95% CI, 0.52-0.90). Mortality measures were the most sensitive to severity adjustment (area under the receiver operating characteristic curve % difference, 29.6%); process measures were the least sensitive (area under the receiver operating characteristic curve % differences: venous thromboembolism prophylaxis, 3.4%; stress ulcer prophylaxis, 2.1%). None of the 10 indicators was clearly and consistently correlated with a majority of the other nine indicators. No indicator performed optimally across assessments. Future research should seek to define and operationalize quality in a way that is relevant to both patients and providers.

Global music approach to persons with dementia: evidence and practice

PubMed Central

Raglio, Alfredo; Filippi, Stefania; Bellandi, Daniele; Stramba-Badiale, Marco

2014-01-01

Music is an important resource for achieving psychological, cognitive, and social goals in the field of dementia. This paper describes the different types of evidence-based music interventions that can be found in literature and proposes a structured intervention model (global music approach to persons with dementia, GMA-D). The literature concerning music and dementia was considered and analyzed. The reported studies included more recent studies and/or studies with relevant scientific characteristics. From this background, a global music approach was proposed using music and sound–music elements according to the needs, clinical characteristics, and therapeutic–rehabilitation goals that emerge in the care of persons with dementia. From the literature analysis the following evidence-based interventions emerged: active music therapy (psychological and rehabilitative approaches), active music therapy with family caregivers and persons with dementia, music-based interventions, caregivers singing, individualized listening to music, and background music. Characteristics of each type of intervention are described and discussed. Standardizing the operational methods and evaluation of the single activities and a joint practice can contribute to achieve the validation of the application model. The proposed model can be considered a low-cost nonpharmacological intervention and a therapeutic–rehabilitation method for the reduction of behavioral disturbances, for stimulation of cognitive functions, and for increasing the overall quality of life of persons with dementia. PMID:25336931

Global music approach to persons with dementia: evidence and practice.

PubMed

Raglio, Alfredo; Filippi, Stefania; Bellandi, Daniele; Stramba-Badiale, Marco

2014-01-01

Music is an important resource for achieving psychological, cognitive, and social goals in the field of dementia. This paper describes the different types of evidence-based music interventions that can be found in literature and proposes a structured intervention model (global music approach to persons with dementia, GMA-D). The literature concerning music and dementia was considered and analyzed. The reported studies included more recent studies and/or studies with relevant scientific characteristics. From this background, a global music approach was proposed using music and sound-music elements according to the needs, clinical characteristics, and therapeutic-rehabilitation goals that emerge in the care of persons with dementia. From the literature analysis the following evidence-based interventions emerged: active music therapy (psychological and rehabilitative approaches), active music therapy with family caregivers and persons with dementia, music-based interventions, caregivers singing, individualized listening to music, and background music. Characteristics of each type of intervention are described and discussed. Standardizing the operational methods and evaluation of the single activities and a joint practice can contribute to achieve the validation of the application model. The proposed model can be considered a low-cost nonpharmacological intervention and a therapeutic-rehabilitation method for the reduction of behavioral disturbances, for stimulation of cognitive functions, and for increasing the overall quality of life of persons with dementia.

Baseline Demographic, Anthropometric, Psychosocial, and Behavioral Characteristics of Rural, Southern Women in Early Pregnancy.

PubMed

Thomson, Jessica L; Tussing-Humphreys, Lisa M; Goodman, Melissa H; Olender, Sarah

2016-09-01

Objectives Beginning life in a healthy uterine environment is essential for future well-being, particularly as it relates to chronic disease risk. Baseline (early pregnancy) demographic, anthropometric (height and weight), psychosocial (depression and perceived stress), and behavioral (diet and exercise) characteristics of rural, Southern, pregnant women enrolled in a maternal, infant, and early childhood home visiting program are described. Methods Participants included 82 women early in their second trimester of pregnancy and residing in three Lower Mississippi Delta counties in the United States. Baseline data were collected through direct measurement and surveys. Results Participants were primarily African American (96 %), young (mean age = 23 years), single (93 %), and received Medicaid (92 %). Mean gestational age was 18 weeks, 67 % of participants were overweight or obese before becoming pregnant, and 16 % tested positive for major depression. Participants were sedentary (mean minutes of moderate intensity physical activity/week = 30), had low diet quality (mean Healthy Eating Index-2010 total score = 43 points), with only 38, 4, and 7 % meeting recommendations for saturated fat, fiber, and sodium intakes, respectively. Conclusions for Practice In the Lower Mississippi Delta, there is a need for interventions that are designed to help women achieve optimal GWG by improving their diet quality and increasing the amount of physical activity performed during pregnancy. Researchers also should consider addressing barriers to changing health behaviors during pregnancy that may be unique to this region of the United States.

Immunological quality and performance of tumor vessel-targeting CAR-T cells prepared by mRNA-EP for clinical research

PubMed Central

Inoo, Kanako; Inagaki, Ryo; Fujiwara, Kento; Sasawatari, Shigemi; Kamigaki, Takashi; Nakagawa, Shinsaku; Okada, Naoki

2016-01-01

We previously reported that tumor vessel-redirected T cells, which were genetically engineered with chimeric antigen receptor (CAR) specific for vascular endothelial growth factor receptor 2 (VEGFR2), demonstrated significant antitumor effects in various murine solid tumor models. In the present study, we prepared anti-VEGFR2 CAR-T cells by CAR-coding mRNA electroporation (mRNA-EP) and analyzed their immunological characteristics and functions for use in clinical research. The expression of anti-VEGFR2 CAR on murine and human T cells was detected with approximately 100% efficiency for a few days, after peaking 6–12 hours after mRNA-EP. Triple transfer of murine anti-VEGFR2 CAR-T cells into B16BL6 tumor-bearing mice demonstrated an antitumor effect comparable to that for the single transfer of CAR-T cells engineered with retroviral vector. The mRNA-EP did not cause any damage or defects to human T-cell characteristics, as determined by viability, growth, and phenotypic parameters. Additionally, two kinds of human anti-VEGFR2 CAR-T cells, which expressed different CAR construction, differentiated to effector phase with cytokine secretion and cytotoxic activity in antigen-specific manner. These results indicate that our anti-VEGFR2 CAR-T cells prepared by mRNA-EP have the potential in terms of quality and performance to offer the prospect of safety and efficacy in clinical research as cellular medicine. PMID:27909701

IRLooK: an advanced mobile infrared signature measurement, data reduction, and analysis system

NASA Astrophysics Data System (ADS)

Cukur, Tamer; Altug, Yelda; Uzunoglu, Cihan; Kilic, Kayhan; Emir, Erdem

2007-04-01

Infrared signature measurement capability has a key role in the electronic warfare (EW) self protection systems' development activities. In this article, the IRLooK System and its capabilities will be introduced. IRLooK is a truly innovative mobile infrared signature measurement system with all its design, manufacturing and integration accomplished by an engineering philosophy peculiar to ASELSAN. IRLooK measures the infrared signatures of military and civil platforms such as fixed/rotary wing aircrafts, tracked/wheeled vehicles and navy vessels. IRLooK has the capabilities of data acquisition, pre-processing, post-processing, analysis, storing and archiving over shortwave, mid-wave and long wave infrared spectrum by means of its high resolution radiometric sensors and highly sophisticated software analysis tools. The sensor suite of IRLooK System includes imaging and non-imaging radiometers and a spectroradiometer. Single or simultaneous multiple in-band measurements as well as high radiant intensity measurements can be performed. The system provides detailed information on the spectral, spatial and temporal infrared signature characteristics of the targets. It also determines IR Decoy characteristics. The system is equipped with a high quality field proven two-axes tracking mount to facilitate target tracking. Manual or automatic tracking is achieved by using a passive imaging tracker. The system also includes a high quality weather station and field-calibration equipment including cavity and extended area blackbodies. The units composing the system are mounted on flat-bed trailers and the complete system is designed to be transportable by large body aircraft.

Multiple Perpetrator Sexual Assault: How Does It Differ from Assault by a Single Perpetrator?

ERIC Educational Resources Information Center

Morgan, Louise; Brittain, Bernadette; Welch, Jan

2012-01-01

Research that attempts to identify characteristic features of multiple perpetrator sexual assault (MPSA) is limited. This study compared demographic and assault related characteristics of 135 cases of MPSA with 139 cases of single perpetrator sexual assault (SPSA) reported to the Haven sexual assault referral centre, Camberwell, London, over a…

Quantitative and fingerprint analyses of Chinese sweet tea plant (Rubus Suavissimus S. Lee)

PubMed Central

Chou, Guixin; Xu, Shun-Jun; Liu, Dong; Koh, Gar Yee; Zhang, Jian; Liu, Zhijun

2009-01-01

Quality of botanical food is increasingly assessed by the content of multiple bioactive compounds. In this study we report, for the first time, an HPLC fingerprinting method for the quality evaluation of Rubus suavissimus leaves possessing multiple bioactivities. Five constituents, gallic acid, rutin, ellagic acid, rubusoside, and steviol monoside were quantified and used in developing qualitative chromatographic fingerprints. The limits of detection and quantification ranged from 0.29 μg/mL to 37.86 μg/mL. The relative standard deviations (RSDs) of intra- and inter-day precisions were no more than 3.14% and 3.01%, respectively. The average recoveries were between 93.1% and 97.5%. The developed method was validated in analyzing fourteen leaf samples with satisfactory results. The contents of the five marker compounds accounted for an average of about 6% w/w with a variability of 16% among the fourteen samples collected from a single site and year. Gallic acid was the least whereas steviol monoside the most variable compounds among the fourteen leaf samples. The characteristic compound rubusoside that is responsible for the sweet taste accounted for 5% of leaf weight. The validated method can now be used to quantitatively and qualitatively assess the quality of Rubus suavissimus leaves as traditional beverage or potential medicines. PMID:19138116

Measuring the impact of pollution on property prices in Madrid: objective versus subjective pollution indicators in spatial models

NASA Astrophysics Data System (ADS)

Mínguez, Román; Montero, José-María; Fernández-Avilés, Gema

2013-04-01

Much work has been done in the context of the hedonic price theory to estimate the impact of air quality on housing prices. Research has employed objective measures of air quality, but only slightly confirms the hedonic theory in the best of cases: the implicit price function relating housing prices to air pollution will, ceteris paribus, be negatively sloped. This paper compares the performance of a spatial Durbin model when using both objective and subjective measures of pollution. On the one hand, we design an Air Pollution Indicator based on measured pollution as the objective measure of pollution. On the other hand, the subjective measure of pollution employed to characterize neighborhoods is the percentage of residents who declare that the neighborhood has serious pollution problems, the percentage being referred to as residents' perception of pollution. For comparison purposes, the empirical part of this research focuses on Madrid (Spain). The study employs a proprietary database containing information about the price and 27 characteristics of 11,796 owner-occupied single family homes. As far as the authors are aware, it is the largest database ever used to analyze the Madrid housing market. The results of the study clearly favor the use of subjective air quality measures.

[WOA: a questionnaire for the evaluation of work organization. Translation and validation of the Italian version].

PubMed

Magnavita, N; Mammi, F; Roccia, K; Vincenti, F

2007-01-01

The Work Organisation Assessment questionnaire (WOAq) has been translated into Italian, back-translated, and modified. Data were collected from 160 health care workers and 50 white-collar bank employees. Employee wellbeing was assessed by the General Health Questionnaire (GHQ12), while work stress was assessed by the Karasek's Job Content Questionnaire (JCQ). Reliability, as measured by Cronbach's alpha, was very good (0.95). Principal component analysis revealed that a significant percentage of the variance (41.8%) was explained by a single summative factor which included 25 of the 28 items. Varimax orthogonal rotation yielded the same five factors observed in the original questionnaire (reward and recognition, quality of relationship with management, quality of physical environment, quality of relationship with colleagues, workload). The WOAQ sum score was positively related to social support, as measured by the Karasek's JCQ (Spearman's rho = 0.523; p < 0.001). It was negatively related both to job strain (Spearman's rho = -0.516; p < 0.001) and psychological distress GHQ (Spearman's rho = -0.365; p < 0.001). In conclusion, the Italian version of WOA maintains the original characteristics. The questionnaire has strong association with job stress and employee wellbeing, and it may be useful in risk assessment procedures.

Characteristics of health care organizations associated with learning and development: lessons from a pilot study.

PubMed

Nyström, Monica

2009-01-01

Characteristics of health care organizations associated with an ability to learn from experiences and to develop and manage change were explored in this study. Understanding of these characteristics is necessary to identify factors influencing success in learning from the past and achieving future health care quality objectives. A literature review of the quality improvement, strategic organizational development and change management, organizational learning, and microsystems fields identified 20 organizational characteristics, grouped under (a) organizational systems, (b) key actors, and (c) change management processes. Qualitative methods, using interviews, focus group reports, and archival records, were applied to find associations between identified characteristics and 6 Swedish health care units externally evaluated as delivering high-quality care. Strong support for a characteristic was defined as units having more than 4 sources describing the characteristic as an important success factor. Eighteen characteristics had strong support from at least 2 units. The strongest evidence was found for the following: (i) key actors have long-term commitment, provide support, and make sense of ambiguous situations; (ii) organizational systems encourage employee commitment, participation, and involvement; and (iii) change management processes are employed systematically. Based on the results, a new model of "characteristics associated with learning and development in health care organizations" is proposed.

Influence of selected water quality characteristics on the toxicity of lambda-cyhalothrin and gamma-cyhalothrin to Hyalella azteca.

PubMed

Smith, S; Lizotte, R E

2007-11-01

This study was conducted to assess the influence of suspended solids, dissolved organic carbon, and phytoplankton (as chlorophyll a) water quality characteristics on lambda-cyhalothrin and gamma-cyhalothrin aqueous toxicity to Hyalella azteca using natural water from 12 ponds and lakes in Mississippi, USA with varying water quality characteristics. H. azteca 48-h immobilization EC50 values ranged from 1.4 to 15.7 ng/L and 0.6 to 13.4 ng/L for lambda-cyhalothrin and gamma-cyhalothrin, respectively. For both pyrethroids, EC50 values linearly increased as turbidity, suspended solids, dissolved organic carbon and chlorophyll a concentrations increased.

Nondestructive Integrity Evaluation of PC Pile Using Wigner-Ville Distribution Method

NASA Astrophysics Data System (ADS)

Ni, Sheng-Huoo; Lo, Kuo-Feng; Huang, Yan-Hong

Nondestructive evaluation (NDE) techniques have been used for years to provide a quality control of the construction for both drilled shafts and driven concrete piles. This trace is typically made up of transient pulses reflected from structural features of the pile or changes in its surrounding environment. It is often analyzed in conjunction with the spectral response, mobility curve, arrival time, etc. The Wigner-Ville Distribution is a new numerical analysis tool for signal process technique in the time-frequency domain and it can offer assistance and enhance signal characteristics for better resolution both easily and quickly. In this study, five single pre-cast concrete piles have been tested and evaluated by both sonic echo method and Wigner-Ville distribution (WVD). Furthermore, two difficult problems in nondestructive evaluation problems are discussed and solved: the first one is with a pile with slight defect, whose necking area percentage is less than 10%, and the other is a pile with multiple defects. The results show that WVD can not only recognize the characteristics easily, but also locate the defects more clearly than the traditional pile integrity testing method.