Right-sided infective endocarditis: recent epidemiologic changes

PubMed Central

Yuan, Shi-Min

2014-01-01

Background: Infective endocarditis (IE) has been increasingly reported, however, little is available regarding recent development of right-sided IE. Methods: Right-sided IE was comprehensively analyzed based on recent 5⅓-year literature. Results: Portal of entry, implanted foreign material, and repaired congenital heart defects were the main predisposing risk factors. Vegetation size on the right-sided valves was much smaller than those beyond the valves. Multiple logistic regression analysis revealed that predisposing risk factors, and vegetation size and locations were independent predictive risks of patients’ survival. Conclusions: Changes of right-sided IE in the past 5⅓ years included younger patient age, and increased vegetation size, but still prominent Staphylococcus aureus infections. Complication spectrum has changed into more valve insufficiency, more embolic events, reduced abscess formation, and considerably decreased valve perforations. With effective antibiotic regimens, prognoses of the patients seemed to be better than before. PMID:24482708

Digital Games as Educational Technology: Promise and Challenges in the Use of Games to Teach

ERIC Educational Resources Information Center

Tobias, Sigmund; Fletcher, J. Dexter; Chen, Fei

2015-01-01

Digital games were reviewed as an emerging tool in educational technology. Factors such as instructional effectiveness, time on task, relationship to curricula, student socio-economic status, violence in games, and game mechanics were considered. Despite considerable variability among studies, larger overall effect sizes for the impact of games on…

Shorter unentangled proofs for ground state connectivity

NASA Astrophysics Data System (ADS)

Caha, Libor; Nagaj, Daniel; Schwarz, Martin

2018-07-01

Can one considerably shorten a proof for a quantum problem by using a protocol with a constant number of unentangled provers? We consider a frustration-free variant of the sf {QCMA}-complete ground state connectivity (GSCON) problem for a system of size n with a proof of superlinear size. We show that we can shorten this proof in sf {QMA}(2): There exists a two-copy, unentangled proof with length of order n, up to logarithmic factors, while the completeness-soundness gap of the new protocol becomes a small inverse polynomial in n.

The effects of surfactant and electrolyte concentrations on the size of nanochitosan during storage

NASA Astrophysics Data System (ADS)

Primaningtyas, Annisa; Budhijanto, Wiratni; Fahrurrozi, Mohammad; Kusumastuti, Yuni

2017-05-01

The nano-sized particle of chitosan (nanochitosan) is a potential natural preservative agent for fresh fish and fish product preservation. Theoretically, nano-sized particles exert strong van der Waals force to each other so that the problem associated with nanochitosan is agglomeration that leads to size instability during storage. Size stability is of importance in the application of nanochitosan as an antimicrobial agent because it considerably affects the antimicrobial activity of chitosan. In this study, the formulation of nanochitosan was optimized with respect to the two major factors in colloid dispersion theory, which were the presence of surfactant and electrolyte. Polysorbate-80 was chosen as the representative of food grade surfactant while NaCl was used as the electrolyte. The purposes of this study were to evaluate the effect of polysorbate-80 concentration and to determine the effect of NaCl ions on the particle size of nanochitosan for at least one month storage period. Data were analyzed using Analysis of Variance (ANOVA) to identify the factors significantly affect the size stability. The dynamics of particle size distribution during storage was measured by Particle Size Analyzer (PSA). The result showed that surfactant did not significantly affect the particle size stability. On the other hand, the addition of electrolyte into the colloidal dispersion of nanochitosan consistently stabilized and also narrowed the particle size distribution during storage in the range of 175-391 nm.

The insulin-like growth factor 1 receptor (IGF1R) contributes to reduced size in dogs

PubMed Central

Hoopes, Barbara C.; Rimbault, Maud; Liebers, David; Ostrander, Elaine A.

2012-01-01

Domestic dog breeds have undergone intense selection for a variety of morphologic features, including size. Among small-dog breeds, defined as those averaging less than ~15 in. at the withers, there remains still considerable variation in body size. Yet essentially all such dogs are fixed for the same allele at the insulin-like growth factor 1 gene, which we and others previously found to be a size locus of large effect. In this study we sought to identify additional genes that contribute to tiny size in dogs using an association scan with the single nucleotide polymorphism (SNP) dataset CanMap, in which 915 purebred dogs were genotyped at 60,968 SNP markers. Our strongest association for tiny size (defined as breed-average height not more than 10 in. at the withers) was on canine chromosome 3 (p = 1.9 × 10−70). Fine mapping revealed a nonsynonymous SNP at chr3:44,706,389 that changes a highly conserved arginine at amino acid 204 to histidine in the insulin-like growth factor 1 receptor (IGF1R). This mutation is predicted to prevent formation of several hydrogen bonds within the cysteine-rich domain of the receptor’s ligand-binding extracellular subunit. Nine of 13 tiny dog breeds carry the mutation and many dogs are homozygous for it. This work underscores the central importance of the IGF1 pathway in controlling the tremendous size diversity of dogs. PMID:22903739

Affordable passive solar homes - low-cost, compact designs. [Glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Crowther, R.L.

1984-01-01

The designs and plans of this book present total, integrative, energy design. They carefully integrate site, architecture, and interior for various population segments that meet a frugal budget. The book is divided into two sections. The first part gives data concerning design, construction, site, climatic factors, materials, interiors, financing, and other home ownership factors that enhance affordability. Basic information on the design assumptions and considerations incorporate into the homes is presented, along with passive solar systems descriptions. The second part presents designs and plans with a brief review of considerations that serve defined human living needs, as well single-family, attached,more » or multiple residential configurations. The plans are based on a dimensional grid using 4-foot and 2-foot (1.2 meter and .61 meter) increments compatible with economic standard lumber and materials sizes.« less

A practical and theoretical definition of very small field size for radiotherapy output factor measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Charles, P. H., E-mail: p.charles@qut.edu.au; Crowe, S. B.; Langton, C. M.

Purpose: This work introduces the concept of very small field size. Output factor (OPF) measurements at these field sizes require extremely careful experimental methodology including the measurement of dosimetric field size at the same time as each OPF measurement. Two quantifiable scientific definitions of the threshold of very small field size are presented. Methods: A practical definition was established by quantifying the effect that a 1 mm error in field size or detector position had on OPFs and setting acceptable uncertainties on OPF at 1%. Alternatively, for a theoretical definition of very small field size, the OPFs were separated intomore » additional factors to investigate the specific effects of lateral electronic disequilibrium, photon scatter in the phantom, and source occlusion. The dominant effect was established and formed the basis of a theoretical definition of very small fields. Each factor was obtained using Monte Carlo simulations of a Varian iX linear accelerator for various square field sizes of side length from 4 to 100 mm, using a nominal photon energy of 6 MV. Results: According to the practical definition established in this project, field sizes ≤15 mm were considered to be very small for 6 MV beams for maximal field size uncertainties of 1 mm. If the acceptable uncertainty in the OPF was increased from 1.0% to 2.0%, or field size uncertainties are 0.5 mm, field sizes ≤12 mm were considered to be very small. Lateral electronic disequilibrium in the phantom was the dominant cause of change in OPF at very small field sizes. Thus the theoretical definition of very small field size coincided to the field size at which lateral electronic disequilibrium clearly caused a greater change in OPF than any other effects. This was found to occur at field sizes ≤12 mm. Source occlusion also caused a large change in OPF for field sizes ≤8 mm. Based on the results of this study, field sizes ≤12 mm were considered to be theoretically very small for 6 MV beams. Conclusions: Extremely careful experimental methodology including the measurement of dosimetric field size at the same time as output factor measurement for each field size setting and also very precise detector alignment is required at field sizes at least ≤12 mm and more conservatively≤15 mm for 6 MV beams. These recommendations should be applied in addition to all the usual considerations for small field dosimetry, including careful detector selection.« less

A practical and theoretical definition of very small field size for radiotherapy output factor measurements.

PubMed

Charles, P H; Cranmer-Sargison, G; Thwaites, D I; Crowe, S B; Kairn, T; Knight, R T; Kenny, J; Langton, C M; Trapp, J V

2014-04-01

This work introduces the concept of very small field size. Output factor (OPF) measurements at these field sizes require extremely careful experimental methodology including the measurement of dosimetric field size at the same time as each OPF measurement. Two quantifiable scientific definitions of the threshold of very small field size are presented. A practical definition was established by quantifying the effect that a 1 mm error in field size or detector position had on OPFs and setting acceptable uncertainties on OPF at 1%. Alternatively, for a theoretical definition of very small field size, the OPFs were separated into additional factors to investigate the specific effects of lateral electronic disequilibrium, photon scatter in the phantom, and source occlusion. The dominant effect was established and formed the basis of a theoretical definition of very small fields. Each factor was obtained using Monte Carlo simulations of a Varian iX linear accelerator for various square field sizes of side length from 4 to 100 mm, using a nominal photon energy of 6 MV. According to the practical definition established in this project, field sizes ≤ 15 mm were considered to be very small for 6 MV beams for maximal field size uncertainties of 1 mm. If the acceptable uncertainty in the OPF was increased from 1.0% to 2.0%, or field size uncertainties are 0.5 mm, field sizes ≤ 12 mm were considered to be very small. Lateral electronic disequilibrium in the phantom was the dominant cause of change in OPF at very small field sizes. Thus the theoretical definition of very small field size coincided to the field size at which lateral electronic disequilibrium clearly caused a greater change in OPF than any other effects. This was found to occur at field sizes ≤ 12 mm. Source occlusion also caused a large change in OPF for field sizes ≤ 8 mm. Based on the results of this study, field sizes ≤ 12 mm were considered to be theoretically very small for 6 MV beams. Extremely careful experimental methodology including the measurement of dosimetric field size at the same time as output factor measurement for each field size setting and also very precise detector alignment is required at field sizes at least ≤ 12 mm and more conservatively ≤ 15 mm for 6 MV beams. These recommendations should be applied in addition to all the usual considerations for small field dosimetry, including careful detector selection. © 2014 American Association of Physicists in Medicine.

Quality of life associated factors in head and neck cancer patients in a developing country using the FACT-H&N.

PubMed

Bilal, Sobia; Doss, Jennifer Geraldine; Cella, David; Rogers, Simon N

2015-03-01

Health-related quality of life (HRQoL) associated factors are vital considerations prior to treatment decision-making for head and neck cancer patients. The study aimed to identify potential socio-demographic and clinical prognostic value of HRQoL in head and neck cancer patients in a developing country. The Functional Assessment of Cancer Therapy-Head and Neck (FACT-H&N)-V4 in Urdu language was administered among 361 head and neck cancer patients. Data were statistically tested through multivariate analysis of variance (MANOVA) and regression modeling to identify the potentially associated factors. Treatment status, tumor stage and tumor site had the strongest negative impact on patients HRQoL, with a statistically significant decrement in FACT summary scales (effect size >0.15). Moderate associated factors of HRQoL included treatment type, marital status, employment status and age (effect size range 0.06-0.15). Weak associated factors of HRQoL with a small effect size (>0.01-0.06) included tumor size and type, gender, education level and ethnicity. This study reports 12 socio-demographic and clinical variables that have a significant impact on HRQoL of head, and neck cancer patients, and that should be considered during treatment decision-making by multidisciplinary teams and also in future HRQoL studies conducted in other developing countries. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. All rights reserved.

Principles of Wound Management and Wound Healing in Exotic Pets.

PubMed

Mickelson, Megan A; Mans, Christoph; Colopy, Sara A

2016-01-01

The care of wounds in exotic animal species can be a challenging endeavor. Special considerations must be made in regard to the animal's temperament and behavior, unique anatomy and small size, and tendency toward secondary stress-related health problems. It is important to assess the entire patient with adequate systemic evaluation and consideration of proper nutrition and husbandry, which could ultimately affect wound healing. This article summarizes the general phases of wound healing, factors that affect healing, and principles of wound management. Emphasis is placed on novel methods of treating wounds and species differences in wound management and healing. Copyright © 2016 Elsevier Inc. All rights reserved.

Principles of Wound Management and Wound Healing in the Exotic Pets

PubMed Central

Mickelson, Megan A.; Mans, Christoph; Colopy, Sara A.

2015-01-01

Synopsis The care of wounds in exotic animal species can be a challenging endeavor. Special considerations must be made in regards to the animal’s temperament and behavior, unique anatomy and small size, and tendency towards secondary stress-related health problems. It is important to assess the entire patient with adequate systemic evaluation and consideration of proper nutrition and husbandry, which could ultimately impact wound healing. This article summarizes the general phases of wound healing, factors that impact healing, and principles of wound management. Emphasis is placed on novel methods of treating wounds and species differences in wound management and healing. PMID:26611923

A comment on towers for windmills. [structural and economic criteria

NASA Technical Reports Server (NTRS)

Budgen, H. P.

1973-01-01

Design considerations for windmill tower structures include the effects of normal wind forces on the rotor and on the tower. Circular tabular or masonry towers present a relatively simple aerodynamic solution. Economic factors establish the tubular tower as superior for small and medium sized windmills. Concrete and standard concrete block designs are cheaper than refabricated steel structures that have to be freighted.

Physical Aspects of Light--"Seeing Parameters". Lighting Techniques in Architecture (Madison, December 9-10, 1969).

ERIC Educational Resources Information Center

Turek, Robert W.

In order to judge or design the lighting of an interior a person must be able to understand and take into account many aspects of seeing and illumination. Important areas of consideration are--(1) factors that contribute to the visibility of an object: size, brightness, contrast, and time, (2) radiant energy with regard to the visible spectrums of…

Airship logistics: The LTA vehicle; a total cargo system

NASA Technical Reports Server (NTRS)

Hackney, L. R. M.

1975-01-01

Design considerations for logistics are dealt with as they pertain to the large rigid LTA vehicle as either a commercial or military cargo carrier. Pertinent factors discussed are: (1) the basic mission; (2) types of payload; (3) the payload space in regards to configuration and sizing, its capacity, and its loadability. A logistic capability comparison of selected cargo airships versus jumbo jets is also made.

Density effect on great tit (Parus major) clutch size intensifies in a polluted environment.

PubMed

Eeva, Tapio; Lehikoinen, Esa

2013-12-01

Long-term data on a great tit (Parus major) population breeding in a metal-polluted zone around a copper-nickel smelter indicate that, against expectations, the clutch size of this species is decreasing even though metal emissions in the area have decreased considerably over the past two decades. Here, we document long-term population-level changes in the clutch size of P. major and explore if changes in population density, population numbers of competing species, timing of breeding, breeding habitat, or female age distribution can explain decreasing clutch sizes. Clutch size of P. major decreased by one egg in the polluted zone during the past 21 years, while there was no significant change in clutch size in the unpolluted reference zone over this time period. Density of P. major nests was similar in both environments but increased threefold during the study period in both areas (from 0.8 to 2.4 nest/ha). In the polluted zone, clutch size has decreased as a response to a considerable increase in population density, while a corresponding density change in the unpolluted zone did not have such an effect. The other factors studied did not explain the clutch size trend. Fledgling numbers in the polluted environment have been relatively low since the beginning of the study period, and they do not show a corresponding decrease to that noted for the clutch size over the same time period. Our study shows that responses of commonly measured life-history parameters to anthropogenic pollution depend on the structure of the breeding population. Interactions between pollution and intrinsic population characters should therefore be taken into account in environmental studies.

Factor associated variations in the home range of a resident Adriatic common bottlenose dolphin population.

PubMed

Rako-Gospić, Nikolina; Radulović, Marko; Vučur, Tihana; Pleslić, Grgur; Holcer, Draško; Mackelworth, Peter

2017-11-15

This study investigates the influence of the most dominant factors (association patterns, gender, natal philopatry and anthropogenic pressure) on the home range size of the 44 most resident common bottlenose dolphins (Tursiops truncatus) inhabiting the waters of the Cres-Lošinj archipelago (north Adriatic Sea, Croatia), a recently declared NATURA 2000 SCI. Results show that variations in home range patterns (MCP, 95% KDE and 50% KDE home range size) among the individual resident dolphins are primarily related to differences in gender and reflect the way in which different genders respond to external stressors. In addition, results confirm the seasonal influence of nautical tourism on both female and male dolphins through changes in their home range sizes. The overall results improve current knowledge of the main anthropogenic threats that should be taken into consideration when developing conservation measures to be applied to this Cres and Lošinj SCI. Copyright © 2017 Elsevier Ltd. All rights reserved.

Local capacity for groundwater protection in Ontario.

PubMed

De Loë, Rob C; Di Giantomasso, Sandra E; Kreutzwiser, Reid D

2002-02-01

Preventing groundwater contamination is vastly cheaper than remediation. Recognizing this, attention in water and land management agencies in North America increasingly turn to groundwater protection. Local agencies, such as municipalities and watershed management districts, are vital to successful groundwater protection, but they face daunting challenges. In the United States, senior governments have recognized these challenges and provide considerable support for local agencies. In Ontario, Canada, local agencies are, to a much greater extent, on their own. The aims in this paper are to analyze factors that shape local capacity for groundwater protection, focusing on Ontario, and to recommend avenues for capacity building. Interrelationships among five dimensions of capacity (technical, financial, institutional, social, and political) are explored through an analysis of three smaller Ontario communities: City of Guelph (population 93,400), Town of Orangeville (population 22,188), and Town of Erin (population 11,000). Size clearly influences capacity for groundwater protection. However, other considerations unrelated to size appear to be as important. These other factors include the ability to form horizontal and vertical linkages with external agencies, political leadership and commitment, and citizen involvement. Thus, smaller communities in Ontario (and other jurisdictions with limited senior government support) would do well to focus on these areas at the same time as they develop their technical, financial, and institutional capacity.

Density estimates of monarch butterflies overwintering in central Mexico

PubMed Central

Diffendorfer, Jay E.; López-Hoffman, Laura; Oberhauser, Karen; Pleasants, John; Semmens, Brice X.; Semmens, Darius; Taylor, Orley R.; Wiederholt, Ruscena

2017-01-01

Given the rapid population decline and recent petition for listing of the monarch butterfly (Danaus plexippus L.) under the Endangered Species Act, an accurate estimate of the Eastern, migratory population size is needed. Because of difficulty in counting individual monarchs, the number of hectares occupied by monarchs in the overwintering area is commonly used as a proxy for population size, which is then multiplied by the density of individuals per hectare to estimate population size. There is, however, considerable variation in published estimates of overwintering density, ranging from 6.9–60.9 million ha−1. We develop a probability distribution for overwinter density of monarch butterflies from six published density estimates. The mean density among the mixture of the six published estimates was ∼27.9 million butterflies ha−1 (95% CI [2.4–80.7] million ha−1); the mixture distribution is approximately log-normal, and as such is better represented by the median (21.1 million butterflies ha−1). Based upon assumptions regarding the number of milkweed needed to support monarchs, the amount of milkweed (Asclepias spp.) lost (0.86 billion stems) in the northern US plus the amount of milkweed remaining (1.34 billion stems), we estimate >1.8 billion stems is needed to return monarchs to an average population size of 6 ha. Considerable uncertainty exists in this required amount of milkweed because of the considerable uncertainty occurring in overwinter density estimates. Nevertheless, the estimate is on the same order as other published estimates. The studies included in our synthesis differ substantially by year, location, method, and measures of precision. A better understanding of the factors influencing overwintering density across space and time would be valuable for increasing the precision of conservation recommendations. PMID:28462031

Density estimates of monarch butterflies overwintering in central Mexico

USGS Publications Warehouse

Thogmartin, Wayne E.; Diffendorfer, James E.; Lopez-Hoffman, Laura; Oberhauser, Karen; Pleasants, John M.; Semmens, Brice X.; Semmens, Darius J.; Taylor, Orley R.; Wiederholt, Ruscena

2017-01-01

Given the rapid population decline and recent petition for listing of the monarch butterfly (Danaus plexippus L.) under the Endangered Species Act, an accurate estimate of the Eastern, migratory population size is needed. Because of difficulty in counting individual monarchs, the number of hectares occupied by monarchs in the overwintering area is commonly used as a proxy for population size, which is then multiplied by the density of individuals per hectare to estimate population size. There is, however, considerable variation in published estimates of overwintering density, ranging from 6.9–60.9 million ha−1. We develop a probability distribution for overwinter density of monarch butterflies from six published density estimates. The mean density among the mixture of the six published estimates was ∼27.9 million butterflies ha−1 (95% CI [2.4–80.7] million ha−1); the mixture distribution is approximately log-normal, and as such is better represented by the median (21.1 million butterflies ha−1). Based upon assumptions regarding the number of milkweed needed to support monarchs, the amount of milkweed (Asclepias spp.) lost (0.86 billion stems) in the northern US plus the amount of milkweed remaining (1.34 billion stems), we estimate >1.8 billion stems is needed to return monarchs to an average population size of 6 ha. Considerable uncertainty exists in this required amount of milkweed because of the considerable uncertainty occurring in overwinter density estimates. Nevertheless, the estimate is on the same order as other published estimates. The studies included in our synthesis differ substantially by year, location, method, and measures of precision. A better understanding of the factors influencing overwintering density across space and time would be valuable for increasing the precision of conservation recommendations.

Hermes CX-7: Air transport system design simulation

NASA Technical Reports Server (NTRS)

Amer, Brian; Barter, John; Colucci, Jay; Foley, Caryn; Kockler, James; Rapp, David; Zeiger, Matthew

1992-01-01

The Hermes CX-7 has been designed to service the overnight parcel package delivery needs of the cities of Aeroworld as determined in the G-Dome Enterprises market survey. The design optimization centers on the prime goal of servicing the needs of these cities as efficiently and profitably as possible. The greatest factors which affect the design of an aircraft for the mission outlined in the Request for Proposal are cost, construction feasibility and effectiveness of the design. Other influencing factors are given by the constraints of the market, including a maximum takeoff and landing distance of 60 feet, storage capability in a container of size 5 ft. x 3 ft. x 2 ft., cargo packages of 2 inch and 4 inch cubes, and ability to turn with a radius no larger than 60 feet. Safety considerations such as flying at or below Mach one (30 ft/s) and controllability and maintainability of the aircraft must also be designed into the aircraft. Another influential factor is the efficiency of the aircraft which involves optimizations and tradeoffs of such factors as weight, lifting surface sizing, structural redundancy, and material costs.

Impact of maternal education, employment and family size on nutritional status of children.

PubMed

Iftikhar, Aisha; Bari, Attia; Bano, Iqbal; Masood, Qaisar

2017-01-01

To determine the impact of maternal education, employment, and family size on nutritional status of children. It was case control study conducted at OPD of children Hospital Lahore, from September 2015 to April 2017. Total 340 children (170 cases and 170 controls) with age range of six months to five years along with their mothers were included. Anthropometric measurements were plotted against WHO growth Charts. 170 wasted (<-2 SD) were matched with 170 controls (≥ -2 SD). Maternal education, employment and family size were compared between the cases and control. Confounding variables noted and dichotomized. Univariate analysis was carried out for factors under consideration i.e.; Maternal Education, employment and family size to study the association of each factor. Logistic regression analysis was applied to study the independent association. Maternal education had significant association with growth parameters; OR of 1.32 with confidence interval of (CI= 1.1 to 1.623). Employment status of mothers had OR of 1.132 with insignificant confidence interval of (CI=0.725 to 1.768). Family size had OR of one with insignificant confidence interval (CI=0.8 -1.21). Association remained same after applying bivariate logistic regression analysis. Maternal education has definite and significant effect on nutritional status of children. This is the key factor to be addressed for prevention or improvement of childhood malnutrition. For this it is imperative to launch sustainable programs at national and regional level to uplift women educational status to combat this ever increasing burden of malnutrition.

Investigating motivating factors for sound hospital waste management.

PubMed

Ali, Mustafa; Wang, Wenping; Chaudhry, Nawaz

2016-08-01

Sustainable management of hospital waste requires an active involvement of all key players. This study aims to test the hypothesis that three motivating factors, namely, Reputation, Liability, and Expense, influence hospital waste management. The survey for this study was conducted in two phases, with the pilot study used for exploratory factor analysis and the subsequent main survey used for cross-validation using confirmatory factor analysis. The hypotheses were validated through one-sample t tests. Correlations were established between the three motivating factors and organizational characteristics of hospital type, location, category, and size. The hypotheses were validated, and it was found that the factors of Liability and Expense varied considerably with respect to location and size of a hospital. The factor of Reputation, however, did not exhibit significant variation. In conclusion, concerns about the reputation of a facility and an apprehension of liability act as incentives for sound hospital waste management, whereas concerns about financial costs and perceived overburden on staff act as disincentives. This paper identifies the non economic motivating factors that can be used to encourage behavioral changes regarding waste management at hospitals in resource constrained environments. This study discovered that organizational characteristics such as hospital size and location cause the responses to vary among the subjects. Hence a policy maker must take into account the institutional setting before introducing a change geared towards better waste management outcomes across hospitals. This study covers a topic that has hitherto been neglected in resource constrained countries. Thus it can be used as one of the first steps to highlight and tackle the issue.

The N-Pact Factor: Evaluating the Quality of Empirical Journals with Respect to Sample Size and Statistical Power

PubMed Central

Fraley, R. Chris; Vazire, Simine

2014-01-01

The authors evaluate the quality of research reported in major journals in social-personality psychology by ranking those journals with respect to their N-pact Factors (NF)—the statistical power of the empirical studies they publish to detect typical effect sizes. Power is a particularly important attribute for evaluating research quality because, relative to studies that have low power, studies that have high power are more likely to (a) to provide accurate estimates of effects, (b) to produce literatures with low false positive rates, and (c) to lead to replicable findings. The authors show that the average sample size in social-personality research is 104 and that the power to detect the typical effect size in the field is approximately 50%. Moreover, they show that there is considerable variation among journals in sample sizes and power of the studies they publish, with some journals consistently publishing higher power studies than others. The authors hope that these rankings will be of use to authors who are choosing where to submit their best work, provide hiring and promotion committees with a superior way of quantifying journal quality, and encourage competition among journals to improve their NF rankings. PMID:25296159

RDF (Refuse Derived Fuel) Utilization in a Navy Stoker Coal-Fired Boiler.

DTIC Science & Technology

1984-10-01

the energy production in any coal-fired boiler conversion consideration. The selection of the actual RDF to be used in a converted boiler should be... industrial boilers by gathering information from the Navy Energy and Environmental Support Activity, engineering field divi- sions, and field...activities. Currently the Navy has 27 industrial size boilers firing coal as a primary fuel and 10 firing coal as a secondary fuel. The four principal factors

Performance considerations for high-definition head-mounted displays

NASA Technical Reports Server (NTRS)

Edwards, Oliver J.; Larimer, James; Gille, Jennifer

1992-01-01

Design image-optimization for helmet-mounted displays (HMDs) for military systems is presently discussed within the framework of a systems-engineering approach that encompasses (1) a description of natural targets in the field; (2) the characteristics of human visual perception; and (3) device specifications that directly relate to these ecological and human-factors parameters. Attention is given to target size and contrast and the relationship of the modulation transfer function to image resolution.

Selection of rolling-element bearing steels for long-life applications

NASA Technical Reports Server (NTRS)

Zaretsky, Erwin V.

1989-01-01

Nearly four decades of research in bearing steel metallurgy and processing have resulted in improvements in bearing life by a factor of 100 over that obtained in the early 1940s. For critical applications such as aircraft, these improvements have resulted in longer lived, more reliable commercial aircraft engines. Material factors such as hardness, retained austenite, grain size and carbide size, number, and area can influence rolling-element fatigue life. Bearing steel processing such as double vacuum melting can have a greater effect on bearing life than material chemistry. The selection and specification of a bearing steel is dependent on the integration of all these considerations into the bearing design and application. The paper reviews rolling-element fatigue data and analysis which can enable the engineer or metallurgist to select a rolling-element bearing steel for critical applications where long life is required.

Selection of rolling-element bearing steels for long-life application

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.

1986-01-01

Nearly four decades of research in bearing steel metallurgy and processing have resulted in improvements in bearing life by a factor of 100 over that obtained in the early 1940's. For critical applications such as aircraft, these improvements have resulted in longer lived, more reliable commercial aircraft engines. Material factors such as hardness, retained austenite, grain size and carbide size, number, and area can influence rolling-element fatigue life. Bearing steel processing such as double vacuum melting can have a greater efect on bearing life than material chemistry. The selection and specification of a bearing steel is dependent on the integration of all these considerations into the bearing design and application. The paper reviews rolling-element fatigue data and analysis which can enable the engineer or metallurgist to select a rolling-element bearing steel for critical applications where long life is required.

Factors affecting ground-water exchange and catchment size for Florida lakes in mantled karst terrain

USGS Publications Warehouse

Lee, Terrie Mackin

2002-01-01

In the mantled karst terrain of Florida, the size of the catchment delivering ground-water inflow to lakes is often considerably smaller than the topographically defined drainage basin. The size is determined by a balance of factors that act individually to enhance or diminish the hydraulic connection between the lake and the adjacent surficial aquifer, as well as the hydraulic connection between the surficial aquifer and the deeper limestone aquifer. Factors affecting ground-water exchange and the size of the ground-water catchment for lakes in mantled karst terrain were examined by: (1) reviewing the physical and hydrogeological characteristics of 14 Florida lake basins with available ground-water inflow estimates, and (2) simulating ground-water flow in hypothetical lake basins. Variably-saturated flow modeling was used to simulate a range of physical and hydrogeologic factors observed at the 14 lake basins. These factors included: recharge rate to the surficial aquifer, thickness of the unsaturated zone, size of the topographically defined basin, depth of the lake, thickness of the surficial aquifer, hydraulic conductivity of the geologic units, the location and size of karst subsidence features beneath and onshore of the lake, and the head in the Upper Floridan aquifer. Catchment size and the magnitude of ground-water inflow increased with increases in recharge rate to the surficial aquifer, the size of the topographically defined basin, hydraulic conductivity in the surficial aquifer, the degree of confinement of the deeper Upper Floridan aquifer, and the head in the Upper Floridan aquifer. The catchment size and magnitude of ground-water inflow increased with decreases in the number and size of karst subsidence features in the basin, and the thickness of the unsaturated zone near the lake. Model results, although qualitative, provided insights into: (1) the types of lake basins in mantled karst terrain that have the potential to generate small and large amounts of ground-water inflow, and (2) the location of ground-water catchments that could be managed to safeguard lake water quality. Knowledge of how ground-water catchments are related to lakes could be used by water-resource managers to recommend setback distances for septic tank drain fields, agricultural land uses, and other land-use practices that contribute nutrients and major ions to lakes.

Specimen size effects on ductile?brittle transition temperature in Charpy impact testing

NASA Astrophysics Data System (ADS)

Kurishita, H.; Yamamoto, T.; Narui, M.; Suwarno, H.; Yoshitake, T.; Yano, Y.; Yamazaki, M.; Matsui, H.

2004-08-01

One key issue for small specimen test techniques is to clarify specimen size effects on test results. In consideration of size effects on determining the ductile-to-brittle transition temperature (DBTT) in Charpy impact testing, a method to evaluate the plastic constraint loss for differently sized Charpy V-notch (CVN) specimens is proposed and applied to a ferritic-martensitic steel, 2WFK, developed by JNC. In the method, a constraint factor, α, that is an index of the plastic constraint is defined as α=σ ∗/σ y∗. Here, σ ∗ is the critical cleavage fracture stress which is a material constant and σ y∗ is the uniaxial yield stress at the DBTT at the strain rate generated in the Charpy impact test. The procedures for evaluating each of σ ∗ and σ y∗ are described and a result of σ ∗ and σ y∗, thus the value of α, is presented for different types of miniaturized and full-sized CVN specimens of 2WFK.

Combining the role of convenience and consideration set size in explaining fish consumption in Norway.

PubMed

Rortveit, Asbjorn Warvik; Olsen, Svein Ottar

2009-04-01

The purpose of this study is to explore how convenience orientation, perceived product inconvenience and consideration set size are related to attitudes towards fish and fish consumption. The authors present a structural equation model (SEM) based on the integration of two previous studies. The results of a SEM analysis using Lisrel 8.72 on data from a Norwegian consumer survey (n=1630) suggest that convenience orientation and perceived product inconvenience have a negative effect on both consideration set size and consumption frequency. Attitude towards fish has the greatest impact on consumption frequency. The results also indicate that perceived product inconvenience is a key variable since it has a significant impact on attitude, and on consideration set size and consumption frequency. Further, the analyses confirm earlier findings suggesting that the effect of convenience orientation on consumption is partially mediated through perceived product inconvenience. The study also confirms earlier findings suggesting that the consideration set size affects consumption frequency. Practical implications drawn from this research are that the seafood industry would benefit from developing and positioning products that change beliefs about fish as an inconvenient product. Future research for other food categories should be done to enhance the external validity.

Marketing environment dynamics and implications for pricing strategies: the case of home health care.

PubMed

Ponsford, B J; Barlow, D

1999-01-01

This research reviews the factors affecting the pricing or rate schedules of home health care agencies. A large number of factors affect costs and thus rate structures. The major factors include reimbursement structures with accompanying discount structures, administrative burdens, and risks. Channel issues include bargaining power, competition, and size. Staffing issues affect pricing and product through the provider level, productivity, and quality outcomes. Physician and patient issues include quality concerns and choices. These factors are discussed in light of overall marketing strategy and the interaction of pricing with other marketing controllables such as product, place/distribution, and promotion. Economic and accounting principles are also reviewed with consideration to understanding direct and indirect costs in order to enable negotiators to effectively price health care services.

V/STOL wind-tunnel testing

NASA Technical Reports Server (NTRS)

Koenig, D. G.

1984-01-01

Factors influencing effective program planning for V/STOL wind-tunnel testing are discussed. The planning sequence itself, which includes a short checklist of considerations that could enhance the value of the tests, is also described. Each of the considerations, choice of wind tunnel, type of model installation, model development and test operations, is discussed, and examples of appropriate past and current V/STOL test programs are provided. A short survey of the moderate to large subsonic wind tunnels is followed by a review of several model installations, from two-dimensional to large-scale models of complete aircraft configurations. Model sizing, power simulation, and planning are treated, including three areas is test operations: data-acquisition systems, acoustic measurements in wind tunnels, and flow surveying.

Unintended consequences of increasing block tariffs pricing policy in urban water

NASA Astrophysics Data System (ADS)

Dahan, Momi; Nisan, Udi

2007-03-01

We exploit a unique data set to estimate the degree of economies of scale in water consumption, controlling for the standard demand factors. We found a linear Engel curve in water consumption: each additional household member consumes the same water quantity regardless of household size, except for a single-person household. Our evidence suggests that the increasing block tariffs (IBT) structure, which is indifferent to household size, has unintended consequences. Large households, which are also likely to be poor given the negative correlation between income and household size, are charged a higher price for water. The degree of economies of scale found here erodes the effectiveness of IBT price structure as a way to introduce an equity consideration. This implication is important in view of the global trend toward the use of IBT.

The temperature size rule in arthropods: independent of macro-environmental variables but size dependent.

PubMed

Klok, C Jaco; Harrison, Jon F

2013-10-01

Temperature is a key factor that affects the rates of growth and development in animals, which ultimately determine body size. Although not universal, a widely documented and poorly understood pattern is the inverse relationship between the temperature at which an ectothermic animal is reared and its body size (temperature size rule [TSR]). The proximate and ultimate mechanisms for the TSR remain unclear. To explore possible explanations for the TSR, we tested for correlations between the magnitude/direction of the TSR and latitude, temperature, elevation, habitat, availability of oxygen, capacity for flight, and taxonomic grouping in 98 species/populations of arthropods. The magnitude and direction of the TSR was not correlated with any of the macro-environmental variables we examined, supporting the generality of the TSR. However, body size affected the magnitude and direction of the TSR, with smaller arthropods more likely to demonstrate a classic TSR. Considerable variation among species exists in the TSR, suggesting either strong interactions with nutrition, or selection based on microclimatic or seasonal variation not captured in classic macro-environmental variables.

Characterization of infectious aerosols in health care facilities: an aid to effective engineering controls and preventive strategies.

PubMed

Cole, E C; Cook, C E

1998-08-01

Assessment of strategies for engineering controls for the prevention of airborne infectious disease transmission to patients and to health care and related workers requires consideration of the factors relevant to aerosol characterization. These factors include aerosol generation, particle size and concentrations, organism viability, infectivity and virulence, airflow and climate, and environmental sampling and analysis. The major focus on attention to engineering controls comes from recent increases in tuberculosis, particularly the multidrug-resistant varieties in the general hospital population, the severely immunocompromised, and those in at-risk and confined environments such as prisons, long-term care facilities, and shelters for the homeless. Many workers are in close contact with persons who have active, undiagnosed, or insufficiently treated tuberculosis. Additionally, patients and health care workers may be exposed to a variety of pathogenic human viruses, opportunistic fungi, and bacteria. This report therefore focuses on the nature of infectious aerosol transmission in an attempt to determine which factors can be systematically addressed to result in proven, applied engineering approaches to the control of infectious aerosols in hospital and health care facility environments. The infectious aerosols of consideration are those that are generated as particles of respirable size by both human and environmental sources and that have the capability of remaining viable and airborne for extended periods in the indoor environment. This definition precludes skin and mucous membrane exposures occurring from splashes (rather than true aerosols) of blood or body fluids containing infectious disease agents. There are no epidemiologic or laboratory studies documenting the transmission of bloodborne virus by way of aerosols.

Determination of macular hole size in relation to individual variabilities of fovea morphology.

PubMed

Shin, J Y; Chu, Y K; Hong, Y T; Kwon, O W; Byeon, S H

2015-08-01

To determine the preoperative anatomic factors in macular holes and their correlation to hole closure. Forty-six eyes with consecutive unilateral macular hole who had undergone surgery and followed up for at least 6 months were enrolled. Optical coherence tomography images and best-corrected visual acuity (BCVA) within 2 weeks prior to operation and 6 months after surgery were analyzed. The maximal hole dimension, foveal degeneration factors (inner nuclear layer cysts, outer segment (OS) shortening) and the widest foveolar floor size of the fellow eyes were measured. For overcoming preoperative individual variability of foveal morphology, an 'adjusted' hole size parameter (the ratio between the hole size and the fellow eye foveolar floor size) was used based on the fact that both eyes were morphologically symmetrical. Mean preoperative BCVA (logMAR) was 1.03±0.43 and the mean postoperative BCVA was 0.50±0.38 at 6 months. Preoperative BCVA is significantly associated with postoperative BCVA (P=0.0002). The average hole diameter was 448.9±196.8 μm and the average fellow eye foveolar floor size was 461.3±128.4 μm. There was a correlation between hole diameter and the size of the fellow eye foveolar floor (Pearson's coefficient=0.608, P<0.0001). The adjusted hole size parameter was 0.979±0.358 (0.761-2.336), which was a strong predictor for both anatomic (P=0.0281) and visual (P=0.0016) outcome. When determining the extent of preoperative hole size, we have to take into consideration the foveal morphologic variations among individuals. Hole size may be related to the original foveal shape, especially in relation to the centrifugal retraction of the foveal tissues.

Microbiological Transformations of Radionuclides in the Subsurface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marshall, Matthew J.; Beliaev, Alex S.; Fredrickson, Jim K.

2010-01-04

Microorganisms are ubiquitous in subsurface environments although their populations sizes and metabolic activities can vary considerably depending on energy and nutrient inputs. As a result of their metabolic activities and the chemical properties of their cell surfaces and the exopolymers they produce, microorganisms can directly or indirectly facilitate the biotransformation of radionuclides, thus altering their solubility and overall fate and transport in the environment. Although biosorption to cell surfaces and exopolymers can be an important factor modifying the solubility of some radionuclides under specific conditions, oxidation state is often considered the single most important factor controlling their speciation and, therefore,more » environmental behavior.« less

Sizing-tube-fin space radiators

NASA Technical Reports Server (NTRS)

Peoples, J. A.

1978-01-01

Temperature and size considerations of the tube fin space radiator were characterized by charts and equations. An approach of accurately assessing rejection capability commensurate with a phase A/B level output is reviewed. A computer program, based on Mackey's equations, is also presented which sizes the rejection area for a given thermal load. The program also handles the flow and thermal considerations of the film coefficient.

Plasmon‐Mediated Solar Energy Conversion via Photocatalysis in Noble Metal/Semiconductor Composites

PubMed Central

Wang, Mengye; Ye, Meidan; Iocozzia, James

2016-01-01

Plasmonics has remained a prominent and growing field over the past several decades. The coupling of various chemical and photo phenomenon has sparked considerable interest in plasmon‐mediated photocatalysis. Given plasmonic photocatalysis has only been developed for a relatively short period, considerable progress has been made in improving the absorption across the full solar spectrum and the efficiency of photo‐generated charge carrier separation. With recent advances in fundamental (i.e., mechanisms) and experimental studies (i.e., the influence of size, geometry, surrounding dielectric field, etc.) on plasmon‐mediated photocatalysis, the rational design and synthesis of metal/semiconductor hybrid nanostructure photocatalysts has been realized. This review seeks to highlight the recent impressive developments in plasmon‐mediated photocatalytic mechanisms (i.e., Schottky junction, direct electron transfer, enhanced local electric field, plasmon resonant energy transfer, and scattering and heating effects), summarize a set of factors (i.e., size, geometry, dielectric environment, loading amount and composition of plasmonic metal, and nanostructure and properties of semiconductors) that largely affect plasmonic photocatalysis, and finally conclude with a perspective on future directions within this rich field of research. PMID:27818901

Plasmon-Mediated Solar Energy Conversion via Photocatalysis in Noble Metal/Semiconductor Composites.

PubMed

Wang, Mengye; Ye, Meidan; Iocozzia, James; Lin, Changjian; Lin, Zhiqun

2016-06-01

Plasmonics has remained a prominent and growing field over the past several decades. The coupling of various chemical and photo phenomenon has sparked considerable interest in plasmon-mediated photocatalysis. Given plasmonic photocatalysis has only been developed for a relatively short period, considerable progress has been made in improving the absorption across the full solar spectrum and the efficiency of photo-generated charge carrier separation. With recent advances in fundamental (i.e., mechanisms) and experimental studies (i.e., the influence of size, geometry, surrounding dielectric field, etc.) on plasmon-mediated photocatalysis, the rational design and synthesis of metal/semiconductor hybrid nanostructure photocatalysts has been realized. This review seeks to highlight the recent impressive developments in plasmon-mediated photocatalytic mechanisms (i.e., Schottky junction, direct electron transfer, enhanced local electric field, plasmon resonant energy transfer, and scattering and heating effects), summarize a set of factors (i.e., size, geometry, dielectric environment, loading amount and composition of plasmonic metal, and nanostructure and properties of semiconductors) that largely affect plasmonic photocatalysis, and finally conclude with a perspective on future directions within this rich field of research.

Habitat Design Considerations for Implementing Solar Particle Event Radiation Protection

NASA Technical Reports Server (NTRS)

Simon, Mathew A.; Clowdsley, Martha S.; Walker, Steven A.

2013-01-01

Radiation protection is an important habitat design consideration for human exploration missions beyond Low Earth Orbit. Fortunately, radiation shelter concepts can effectively reduce astronaut exposure for the relatively low proton energies of solar particle events, enabling moderate duration missions of several months before astronaut exposure (galactic cosmic ray and solar particle event) approaches radiation exposure limits. In order to minimize habitat mass for increasingly challenging missions, design of radiation shelters must minimize dedicated, single-purpose shielding mass by leveraging the design and placement of habitat subsystems, accommodations, and consumables. NASA's Advanced Exploration Systems RadWorks Storm Shelter Team has recently designed and performed radiation analysis on several low dedicated mass shelter concepts for a year-long mission. This paper describes habitat design considerations identified during the study's radiation analysis. These considerations include placement of the shelter within a habitat for improved protection, integration of human factors guidance for sizing shelters, identification of potential opportunities for habitat subsystems to compromise on individual subsystem performances for overall vehicle mass reductions, and pre-configuration of shelter components for reduced deployment times.

Effects of geometric configuration on droplet generation in Y-junctions and anti-Y-junctions microchannels

NASA Astrophysics Data System (ADS)

Liu, Zhao-Miao; Liu, Li-Kun; Shen, Feng

2015-10-01

Droplets generation in Y-junctions and anti-Y-junctions microchannels are experimentally studied using a high speed digital microscopic system and numerical simulation. Geometric configuration of a microchannel, such as Y-angle (90°, 135°, -90° and -135°), channel depth and other factors have been taken into consideration. It is found that droplets generated in anti-Y-junctions have a smaller size and a shorter generation cycle compared with those in Y-junctions under the same experimental conditions. Through observing the internal velocity field, the vortex appearing in continuous phase in anti-Y-junctions is one of the key factors for the difference of droplet size and generation cycle. It is found that droplet size is bigger and generation cycle is longer when the absolute angle value of the intersection between the continuous and the dispersed phases (i.e., the angle between the main channel and the continuous phase or the dispersed phase channel) increases. The droplet's size is influenced by the Y-angle, which varies with the channel depth in Y-junctions. The Y-angle has a positive effect on the droplet generation cycle, but a smaller height-width ratio will enhance the impact of a continuous and dispersed phase's intersection angle on the droplet generation cycle in Y-junctions microchannels.

Information sharing systems and teamwork between sub-teams: a mathematical modeling perspective

NASA Astrophysics Data System (ADS)

Tohidi, Hamid; Namdari, Alireza; Keyser, Thomas K.; Drzymalski, Julie

2017-12-01

Teamwork contributes to a considerable improvement in quality and quantity of the ultimate outcome. Collaboration and alliance between team members bring a substantial progress for any business. However, it is imperative to acquire an appropriate team since many factors must be considered in this regard. Team size may represent the effectiveness of a team and it is of paramount importance to determine what the ideal team size exactly should be. In addition, information technology increasingly plays a differentiating role in productivity and adopting appropriate information sharing systems may contribute to improvement in efficiency especially in competitive markets when there are numerous producers that compete with each other. The significance of transmitting information to individuals is inevitable to assure an improvement in team performance. In this paper, a model of teamwork and its organizational structure are presented. Furthermore, a mathematical model is proposed in order to characterize a group of sub-teams according to two criteria: team size and information technology. The effect of information technology on performance of team and sub-teams as well as optimum size of those team and sub-teams from a productivity perspective are studied. Moreover, a quantitative sensitivity analysis is presented in order to analyze the interaction between these two factors through a sharing system.

Remote Sensing of In-Flight Icing Conditions: Operational, Meteorological, and Technological Considerations

NASA Technical Reports Server (NTRS)

Ryerson, Charles C.

2000-01-01

Remote-sensing systems that map aircraft icing conditions in the flight path from airports or aircraft would allow icing to be avoided and exited. Icing remote-sensing system development requires consideration of the operational environment, the meteorological environment, and the technology available. Operationally, pilots need unambiguous cockpit icing displays for risk management decision-making. Human factors, aircraft integration, integration of remotely sensed icing information into the weather system infrastructures, and avoid-and-exit issues need resolution. Cost, maintenance, power, weight, and space concern manufacturers, operators, and regulators. An icing remote-sensing system detects cloud and precipitation liquid water, drop size, and temperature. An algorithm is needed to convert these conditions into icing potential estimates for cockpit display. Specification development requires that magnitudes of cloud microphysical conditions and their spatial and temporal variability be understood at multiple scales. The core of an icing remote-sensing system is the technology that senses icing microphysical conditions. Radar and microwave radiometers penetrate clouds and can estimate liquid water and drop size. Retrieval development is needed; differential attenuation and neural network assessment of multiple-band radar returns are most promising to date. Airport-based radar or radiometers are the most viable near-term technologies. A radiometer that profiles cloud liquid water, and experimental techniques to use radiometers horizontally, are promising. The most critical operational research needs are to assess cockpit and aircraft system integration, develop avoid-and-exit protocols, assess human factors, and integrate remote-sensing information into weather and air traffic control infrastructures. Improved spatial characterization of cloud and precipitation liquid-water content, drop-size spectra, and temperature are needed, as well as an algorithm to convert sensed conditions into a measure of icing potential. Technology development also requires refinement of inversion techniques. These goals can be accomplished with collaboration among federal agencies including NASA, the FAA, the National Center for Atmospheric Research, NOAA, and the Department of Defense. This report reviews operational, meteorological, and technological considerations in developing the capability to remotely map in-flight icing conditions from the ground and from the air.

Bipartite networks improve understanding of effects of waterbody size and angling method on angler–fish interactions

USGS Publications Warehouse

Chizinski, Christopher J.; Martin, Dustin R.; Shizuka, Daizaburo; Pope, Kevin L.

2018-01-01

Networks used to study interactions could provide insights to fisheries. We compiled data from 27 297 interviews of anglers across waterbodies that ranged in size from 1 to 12 113 ha. Catch rates of fish species among anglers grouped by species targeted generally differed between angling methods (bank or boat). We constructed angler–catch bipartite networks (angling method specific) between anglers and fish and measured several network metrics. There was considerable variation in networks among waterbodies, with multiple metrics influenced by waterbody size. Number of species-targeting angler groups and number of fish species caught increased with increasing waterbody size. Mean number of links for species-targeting angler groups and fish species caught also increased with waterbody size. Connectance (realized proportion of possible links) of angler–catch interaction networks decreased slower for boat anglers than for bank anglers with increasing waterbody size. Network specialization (deviation of number of interactions from expected) was not significantly related to waterbody size or angling methods. Application of bipartite networks in fishery science requires careful interpretation of outputs, especially considering the numerous confounding factors prevalent in recreational fisheries.

A Model of Family Factors and Individual and Unit Readiness: Literature Review

DTIC Science & Technology

1991-02-01

ability of forces, units, weapon systems, or equipment to deliver the outputs for which they were designed (includes the ability to deploy and employ...the Army’s "Extracts of Non -Divisional TOE," FM 101-10-2, 1977.) At last count, there were approximately a zillion company-sized units in the Army...Hawley (1985) lays out the minimum considerations that must be addressed in designing cross-training programs for surge (i.e., combat condition

Unidentified Factors in Jojoba Meal Prevent Oviduct Development in Broiler Breeder Females.

PubMed

Vermaut; Onagbesan; Bruggeman; Verhoeven; Berghman; Flo; Cokelaere; Decuypere

1998-01-19

Supplementation of feed with jojoba meal, as a means for autonomous feed restriction, was successful in depressing feed intake and controlling body weight of broiler breeder pullets to the extent recommended by the breeder company. However, these broiler breeders never produced eggs. At the level of ovary, normal follicle development and maturation did occur. A considerable number of ovulations occurred which were not followed by oviposition. After ovulation, the ova could not be captured by the oviduct, because of the small size of the oviduct, resulting in "internal laying". The virtual absence of oviduct development cannot be explained presently but it must be due to some yet unidentified factor(s) in jojoba meal which prevent(s) the normal development of the oviduct. These factors may be acting by abnormally increasing plasma progesterone or triiodothyronin levels and/or directly by themselves interfering with oviduct development. The nature of these factors requires further investigations.

Programming and machining of complex parts based on CATIA solid modeling

NASA Astrophysics Data System (ADS)

Zhu, Xiurong

2017-09-01

The complex parts of the use of CATIA solid modeling programming and simulation processing design, elaborated in the field of CNC machining, programming and the importance of processing technology. In parts of the design process, first make a deep analysis on the principle, and then the size of the design, the size of each chain, connected to each other. After the use of backstepping and a variety of methods to calculate the final size of the parts. In the selection of parts materials, careful study, repeated testing, the final choice of 6061 aluminum alloy. According to the actual situation of the processing site, it is necessary to make a comprehensive consideration of various factors in the machining process. The simulation process should be based on the actual processing, not only pay attention to shape. It can be used as reference for machining.

A qualitative study of parents' perceptions and use of portion size strategies for preschool children's snacks.

PubMed

Blake, Christine E; Fisher, Jennifer Orlet; Ganter, Claudia; Younginer, Nicholas; Orloski, Alexandria; Blaine, Rachel E; Bruton, Yasmeen; Davison, Kirsten K

2015-05-01

Increases in childhood obesity correspond with shifts in children's snacking behaviors and food portion sizes. This study examined parents' conceptualizations of portion size and the strategies they use to portion snacks in the context of preschool-aged children's snacking. Semi-structured qualitative interviews were conducted with non-Hispanic white (W), African American (AA), and Hispanic (H) low-income parents (n = 60) of preschool-aged children living in Philadelphia and Boston. The interview examined parents' child snacking definitions, purposes, contexts, and frequency. Verbatim transcripts were analyzed using a grounded theory approach. Coding matrices compared responses by race/ethnicity, parent education, and household food security status. Parents' commonly referenced portion sizes when describing children's snacks with phrases like "something small." Snack portion sizes were guided by considerations including healthfulness, location, hunger, and timing. Six strategies for portioning snacks were presented including use of small containers, subdividing large portions, buying prepackaged snacks, use of hand measurement, measuring cups, scales, and letting children determine portion size. Differences in considerations and strategies were seen between race/ethnic groups and by household food security status. Low-income parents of preschool-aged children described a diverse set of considerations and strategies related to portion sizes of snack foods offered to their children. Future studies should examine how these considerations and strategies influence child dietary quality. Copyright © 2014 Elsevier Ltd. All rights reserved.

A qualitative study of parents’ perceptions and use of portion size strategies for preschool children’s snacks

PubMed Central

Blake, Christine E.; Fisher, Jennifer Orlet; Ganter, Claudia; Younginer, Nicholas; Orloski, Alexandria; Blaine, Rachel E.; Bruton, Yasmeen; Davison, Kirsten K.

2014-01-01

Objective Increases in childhood obesity correspond with shifts in children’s snacking behaviors and food portion sizes. This study examined parents’ conceptualizations of portion size and the strategies they use to portion snacks in the context of preschool-aged children’s snacking. Methods Semi-structured qualitative interviews were conducted with non-Hispanic white (W), African American (AA), and Hispanic (H) low-income parents (n=60) of preschool-aged children living in Philadelphia and Boston. The interview examined parents’ child snacking definitions, purposes, contexts, and frequency. Verbatim transcripts were analyzed using a grounded theory approach. Coding matrices compared responses by race/ethnicity, parent education, and household food security status. Results Parents’ commonly referenced portion sizes when describing children’s snacks with phrases like “something small.” Snack portion sizes were guided by considerations including healthfulness, location, hunger, and timing. Six strategies for portioning snacks were presented including use of small containers, subdividing large portions, buying prepackaged snacks, use of hand measurement, measuring cups, scales, and letting children determine portion size. Differences in considerations and strategies were seen between race/ ethnic groups and by household food security status. Conclusions Low-income parents of preschool-aged children described a diverse set of considerations and strategies related to portion sizes of snack foods offered to their children. Future studies should examine how these considerations and strategies influence child dietary quality. PMID:25447008

Particle and gaseous emissions from commercial aircraft at each stage of the landing and takeoff cycle.

PubMed

Mazaheri, M; Johnson, G R; Morawska, L

2009-01-15

A novel technique was used to measure emission factors for commonly used commercial aircraft including a range of Boeing and Airbus airframes under real world conditions. Engine exhaust emission factors for particles in terms of particle number and mass (PM2.5), along with those for CO2 and NOx, were measured for over 280 individual aircraft during the various modes of landing/takeoff (LTO) cycle. Results from this study show that particle number, and NOx emission factors are dependent on aircraft engine thrust level. Minimum and maximum emissions factors for particle number, PM2.5, and NOx emissions were found to be in the range of 4.16 x 10(15)-5.42 x 10(16) kg(-1), 0.03-0.72 g.kg(-1), and 3.25-37.94 g.kg(-1), respectively, for all measured airframes and LTO cycle modes. Number size distributions of emitted particles for the naturally diluted aircraft plumes in each mode of LTO cycle showed that particles were predominantly in the range of 4-100 nm in diameter in all cases. In general, size distributions exhibit similar modality during all phases of the LTO cycle. A very distinct nucleation mode was observed in all particle size distributions, except for taxiing and landing of A320 aircraft. Accumulation modes were also observed in all particle size distributions. Analysis of aircraft engine emissions during LTO cycle showed that aircraft thrust level is considerably higher during taxiing than idling suggesting that International Civil Aviation Organization (ICAO) standards need to be modified as the thrust levels for taxi and idle are considered to be the same (7% of total thrust) (Environmental Protection, Annex 16, Vol. II, Aircraft Engine Emissions, 2nd ed.; ICAO--International Civil Aviation Organization: Montreal, 1993).

Opportunities in SMR Emergency Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne L.

2014-10-01

Using year 2014 cost information gathered from twenty different locations within the current commercial nuclear power station fleet, an assessment was performed concerning compliance costs associated with the offsite emergency Planning Standards contained in 10 CFR 50.47(b). The study was conducted to quantitatively determine the potential cost benefits realized if an emergency planning zone (EPZ) were reduced in size according to the lowered risks expected to accompany small modular reactors (SMR). Licensees are required to provide a technical basis when proposing to reduce the surrounding EPZ size to less than the 10 mile plume exposure and 50 mile ingestion pathwaymore » distances currently being used. To assist licensees in assessing the savings that might be associated with such an action, this study established offsite emergency planning costs in connection with four discrete EPZ boundary distances, i.e., site boundary, 2 miles, 5 miles and 10 miles. The boundary selected by the licensee would be based on where EPA Protective Action Guidelines are no longer likely to be exceeded. Additional consideration was directed towards costs associated with reducing the 50 mile ingestion pathway EPZ. The assessment methodology consisted of gathering actual capital costs and annual operating and maintenance costs for offsite emergency planning programs at the surveyed sites, partitioning them according to key predictive factors, and allocating those portions to individual emergency Planning Standards as a function of EPZ size. Two techniques, an offsite population-based approach and an area-based approach, were then employed to calculate the scaling factors which enabled cost projections as a function of EPZ size. Site-specific factors that influenced source data costs, such as the effects of supplemental funding to external state and local agencies for offsite response organization activities, were incorporated into the analysis to the extent those factors could be representatively apportioned.« less

Resting site use of giant pandas in Wanglang Nature Reserve.

PubMed

Kang, Dongwei; Wang, Xiaorong; Li, Junqing

2017-10-23

Little is known about the resting sites used by the giant panda (Ailuropoda melanoleuca), which restricts our understanding of their resting habits and limits conservation efforts. To enhance our understanding of resting site requirements and factors affecting the resting time of giant pandas, we investigated the characteristics of resting sites in the Wanglang Nature Reserve, Sichuan Province, China. The results indicated that the resting sites of giant pandas were characterised by a mean slope of 21°, mean nearest tree size of 53.75 cm, mean nearest shrub size of 2.82 cm, and mean nearest bamboo number of 56. We found that the resting sites were closer to bamboo than to trees and shrubs, suggesting that the resting site use of giant pandas is closely related to the presence of bamboo. Considering that giant pandas typically rest near a large-sized tree, protection of large trees in the forests is of considerable importance for the conservation of this species. Furthermore, slope was found to be an important factor affecting the resting time of giant pandas, as they tended to rest for a relatively longer time in sites with a smaller degree of slope.

Enrichment and distribution of 24 elements within the sub-sieve particle size distribution ranges of fly ash from wastes incinerator plants.

PubMed

Raclavská, Helena; Corsaro, Agnieszka; Hartmann-Koval, Silvie; Juchelková, Dagmar

2017-12-01

The management of an increasing amount of municipal waste via incineration has been gaining traction. Fly ash as a by-product of incineration of municipal solid waste is considered a hazardous waste due to the elevated content of various elements. The enrichment and distribution of 24 elements in fly ash from three wastes incinerators were evaluated. Two coarse (>100 μm and <100 μm) and five sub-sieve (12-16, 16-23, 23-34, 34-49, and 49-100 μm) particle size fractions separated on a cyclosizer system were analyzed. An enhancement in the enrichment factor was observed in all samples for the majority of elements in >100 μm range compared with <100 μm range. The enrichment factor of individual elements varied considerably within the samples as well as the sub-sieve particle size ranges. These variations were attributed primarily to: (i) the vaporization and condensation mechanisms, (ii) the different design of incineration plants, (iii) incineration properties, (iv) the type of material being incinerated, and (v) the affinity of elements. Copyright © 2017 Elsevier Ltd. All rights reserved.

The dynamics of particle disks. III - Dense and spinning particle disks. [development of kinetic theory for planetary rings

NASA Technical Reports Server (NTRS)

Araki, Suguru

1991-01-01

The kinetic theory of planetary rings developed by Araki and Tremaine (1986) and Araki (1988) is extended and refined, with a focus on the implications of finite particle size: (1) nonlocal collisions and (2) finite filling factors. Consideration is given to the derivation of the equations for the local steady state, the low-optical-depth limit, and the steady state at finite filling factors (including the effects of collision inelasticity, spin degrees of freedom, and self-gravity). Numerical results are presented in extensive graphs and characterized in detail. The importance of distinguishing effects (1) and (2) at low optical depths is stressed, and the existence of vertical density profiles with layered structures at high filling factors is demonstrated.

A study of worldwide communications markets: The relationship between federally sponsored research and development and competitiveness of US industry in this market

NASA Technical Reports Server (NTRS)

1977-01-01

Many factors have been reviewed in an attempt to seek criteria for the establishment of regions or nations as potential customers for space communication systems. These include economic measures, demographic distributions, topographic variations, physical size, national dispersion, telephones available, investment credit viability, and the general level of technology within the population. A major consideration is the fact that essentially all nations are subject to significant financial constraints. Consequently, some form of national investment priorities becomes necessary, and these priorities are generally perceived differently according to the factors mentioned above and also according to the personalities and interests of each nation's decision makers.

No rationale for 1 variable per 10 events criterion for binary logistic regression analysis.

PubMed

van Smeden, Maarten; de Groot, Joris A H; Moons, Karel G M; Collins, Gary S; Altman, Douglas G; Eijkemans, Marinus J C; Reitsma, Johannes B

2016-11-24

Ten events per variable (EPV) is a widely advocated minimal criterion for sample size considerations in logistic regression analysis. Of three previous simulation studies that examined this minimal EPV criterion only one supports the use of a minimum of 10 EPV. In this paper, we examine the reasons for substantial differences between these extensive simulation studies. The current study uses Monte Carlo simulations to evaluate small sample bias, coverage of confidence intervals and mean square error of logit coefficients. Logistic regression models fitted by maximum likelihood and a modified estimation procedure, known as Firth's correction, are compared. The results show that besides EPV, the problems associated with low EPV depend on other factors such as the total sample size. It is also demonstrated that simulation results can be dominated by even a few simulated data sets for which the prediction of the outcome by the covariates is perfect ('separation'). We reveal that different approaches for identifying and handling separation leads to substantially different simulation results. We further show that Firth's correction can be used to improve the accuracy of regression coefficients and alleviate the problems associated with separation. The current evidence supporting EPV rules for binary logistic regression is weak. Given our findings, there is an urgent need for new research to provide guidance for supporting sample size considerations for binary logistic regression analysis.

Minimum clinically important differences in chronic pain vary considerable by baseline pain and methodological factors: systematic review of empirical studies.

PubMed

Frahm Olsen, Mette; Bjerre, Eik; Hansen, Maria Damkjær; Tendal, Britta; Hilden, Jørgen; Hróbjartsson, Asbjørn

2018-05-21

The minimum clinically important difference (MCID) is used to interpret the relevance of treatment effects, e.g., when developing clinical guidelines, evaluating trial results or planning sample sizes. There is currently no agreement on an appropriate MCID in chronic pain and little is known about which contextual factors cause variation. This is a systematic review. We searched PubMed, EMBASE, and Cochrane Library. Eligible studies determined MCID for chronic pain based on a one-dimensional pain scale, a patient-reported transition scale of perceived improvement, and either a mean change analysis (mean difference in pain among minimally improved patients) or a threshold analysis (pain reduction associated with best sensitivity and specificity for identifying minimally improved patients). Main results were descriptively summarized due to considerable heterogeneity, which were quantified using meta-analyses and explored using subgroup analyses and metaregression. We included 66 studies (31.254 patients). Median absolute MCID was 23 mm on a 0-100 mm scale (interquartile range [IQR] 12-39) and median relative MCID was 34% (IQR 22-45) among studies using the mean change approach. In both cases, heterogeneity was very high: absolute MCID I 2  = 99% and relative MCID I 2  = 96%. High variation was also seen among studies using the threshold approach: median absolute MCID was 20 mm (IQR 15-30) and relative MCID was 32% (IQR 15-41). Absolute MCID was strongly associated with baseline pain, explaining approximately two-thirds of the variation, and to a lesser degree with the operational definition of minimum pain relief and clinical condition. A total of 15 clinical and methodological factors were assessed as possible causes for variation in MCID. MCID for chronic pain relief vary considerably. Baseline pain is strongly associated with absolute, but not relative, measures. To a much lesser degree, MCID is also influenced by the operational definition of relevant pain relief and possibly by clinical condition. Explicit and conscientious reflections on the choice of an MCID are required when classifying effect sizes as clinically important or trivial. Copyright © 2018 Elsevier Inc. All rights reserved.

Determinants of Awareness, Consideration, and Choice Set Size in University Choice.

ERIC Educational Resources Information Center

Dawes, Philip L.; Brown, Jennifer

2002-01-01

Developed and tested a model of students' university "brand" choice using five individual-level variables (ethnic group, age, gender, number of parents going to university, and academic ability) and one situational variable (duration of search) to explain variation in the sizes of awareness, consideration, and choice decision sets. (EV)

Simple and multiple linear regression: sample size considerations.

PubMed

Hanley, James A

2016-11-01

The suggested "two subjects per variable" (2SPV) rule of thumb in the Austin and Steyerberg article is a chance to bring out some long-established and quite intuitive sample size considerations for both simple and multiple linear regression. This article distinguishes two of the major uses of regression models that imply very different sample size considerations, neither served well by the 2SPV rule. The first is etiological research, which contrasts mean Y levels at differing "exposure" (X) values and thus tends to focus on a single regression coefficient, possibly adjusted for confounders. The second research genre guides clinical practice. It addresses Y levels for individuals with different covariate patterns or "profiles." It focuses on the profile-specific (mean) Y levels themselves, estimating them via linear compounds of regression coefficients and covariates. By drawing on long-established closed-form variance formulae that lie beneath the standard errors in multiple regression, and by rearranging them for heuristic purposes, one arrives at quite intuitive sample size considerations for both research genres. Copyright © 2016 Elsevier Inc. All rights reserved.

Basic numerical competences in large-scale assessment data: Structure and long-term relevance.

PubMed

Hirsch, Stefa; Lambert, Katharina; Coppens, Karien; Moeller, Korbinian

2018-03-01

Basic numerical competences are seen as building blocks for later numerical and mathematical achievement. The current study aimed at investigating the structure of early numeracy reflected by different basic numerical competences in kindergarten and its predictive value for mathematical achievement 6 years later using data from large-scale assessment. This allowed analyses based on considerably large sample sizes (N > 1700). A confirmatory factor analysis indicated that a model differentiating five basic numerical competences at the end of kindergarten fitted the data better than a one-factor model of early numeracy representing a comprehensive number sense. In addition, these basic numerical competences were observed to reliably predict performance in a curricular mathematics test in Grade 6 even after controlling for influences of general cognitive ability. Thus, our results indicated a differentiated view on early numeracy considering basic numerical competences in kindergarten reflected in large-scale assessment data. Consideration of different basic numerical competences allows for evaluating their specific predictive value for later mathematical achievement but also mathematical learning difficulties. Copyright © 2017 Elsevier Inc. All rights reserved.

The role of anthropometry in designing for sustainability.

PubMed

Nadadur, Gopal; Parkinson, Matthew B

2013-01-01

An understanding of human factors and ergonomics facilitates the design of artefacts, tasks and environments that fulfil their users' physical and cognitive requirements. Research in these fields furthers the goal of efficiently accommodating the desired percentage of user populations through enhanced awareness and modelling of human variability. Design for sustainability (DfS) allows for these concepts to be leveraged in the broader context of designing to minimise negative impacts on the environment. This paper focuses on anthropometry and proposes three ways in which its consideration is relevant to DfS: reducing raw material consumption, increasing usage lifetimes and ethical human resource considerations. This is demonstrated through the application of anthropometry synthesis, virtual fitting, and sizing and adjustability allocation methods in the design of an industrial workstation seat for use in five distinct global populations. This work highlights the importance of and opportunities for using ergonomic design principles in DfS efforts. This research demonstrates the relevance of some anthropometry-based ergonomics concepts to the field of design for sustainability. A global design case study leverages human variability considerations in furthering three sustainable design goals: reducing raw material consumption, increasing usage lifetimes and incorporating ethical human resource considerations in design.

Whose Disease Will Recur After Mastectomy for Early Stage, Node-Negative Breast Cancer? A Systematic Review.

PubMed

Kent, Collin; Horton, Janet; Blitzblau, Rachel; Koontz, Bridget F

2015-12-01

Effective local control is associated with improved overall survival, particularly for women with early-stage cancers. No other local therapy is typically offered to women with T1-2 N0 breast cancer after mastectomy, although in select women the 5-year local recurrence rate can be as high as 20%. Therefore, accurately predicting the women who are at highest risk for recurrence after mastectomy will identify those who might benefit from more aggressive adjuvant treatment. A systematic search was conducted identifying risk factors associated with locoregional recurrence, including age, menopausal status, receptor status, lymphovascular invasion (LVI), margin status, use of systemic therapy, size, grade, and genomic classifer score. Although associations varied among studies, the risk factors most consistently identified were age ≤ 40 years, LVI, positive/close margin, and larger tumor size. In women with multiple high risk factors, risk of local recurrence was as high as 20% at 10 years. Additional multicenter studies are needed to investigate risk factors for locoregional recurrence after mastectomy without radiotherapy in T1-2N0 breast cancer. Consideration of additional adjuvant local therapy might be warranted in a subset of women at high risk of local recurrence. Copyright © 2015 Elsevier Inc. All rights reserved.

Variation in tooth morphology of Gorilla gorilla.

PubMed

Uchida, A

1998-01-01

Gorilla gorilla exemplifies a species that shows considerable variation in habitat, behaviour, genetic structure and morphology. This study examines variation of dental morphology in gorillas. Despite the marked size dimorphism, there are no significant shape differences between the sexes within subspecies. Differences in dental morphology, including tooth cusp proportions between the western G. g. gorilla and the eastern G. g. beringei are considerable. Although more similar to G. g. beringei than to the western G. g. gorilla, G. g. graueri also shows distinct morphological features. This indicates that the morphology of G. g. graueri is not merely intermediate, and genetic isolation between the two eastern subspecies could have had a substantial influence. Such extensive variation in dental morphology in Gorilla gorilla can be considered to be the result of an interesting combination of factors, including local dietary adaptations.

Market assessment of photovoltaic power systems for agricultural applications in Colombia

NASA Technical Reports Server (NTRS)

Steigelmann, W.; Neyeloff, S.

1981-01-01

The market potential for photovoltaic systems in the agricultural sector of Colombia is assessed. Consideration was given to over twenty specific livestock production, crop production, and rural services applications requiring less than 15 kW of power without backup power. Analysis revealed that near-term potential exists for photovoltaic technology in applications in coffee depulging, cattle watering, rural domestic users, rural water supply and small irrigation, rural telephones, rural health posts, and vaccine refrigeration. Market size would be in the 1200 to 2500 kWp range in the 1981 to 86 timeframe. Positive factors influencing the market size include a lack of electrical services, potential for developing the Llanos Orientales Territory, high fuel costs in remote areas, balance of system availability, the presence of wealthy land owners, and a large government-sponsored contract for photovoltaic (PV)-powered rural telephone systems. The anticipated eligibility of photovoltaic equipment for loans would be a further positive factor in market potential. Important negative factors include relatively inexpensive energy in developed locations, reliance on hydropower, lack of familiarity with PV equipment, a lack of financing, and established foreign competition in PV technology. Recommendations to American PV manufacturers attempting to develop the Colombian market are given.

Market assessment of photovoltaic power systems for agricultural applications in Colombia

NASA Astrophysics Data System (ADS)

Steigelmann, W.; Neyeloff, S.

1981-11-01

The market potential for photovoltaic systems in the agricultural sector of Colombia is assessed. Consideration was given to over twenty specific livestock production, crop production, and rural services applications requiring less than 15 kW of power without backup power. Analysis revealed that near-term potential exists for photovoltaic technology in applications in coffee depulging, cattle watering, rural domestic users, rural water supply and small irrigation, rural telephones, rural health posts, and vaccine refrigeration. Market size would be in the 1200 to 2500 kWp range in the 1981 to 86 timeframe. Positive factors influencing the market size include a lack of electrical services, potential for developing the Llanos Orientales Territory, high fuel costs in remote areas, balance of system availability, the presence of wealthy land owners, and a large government-sponsored contract for photovoltaic (PV)-powered rural telephone systems. The anticipated eligibility of photovoltaic equipment for loans would be a further positive factor in market potential. Important negative factors include relatively inexpensive energy in developed locations, reliance on hydropower, lack of familiarity with PV equipment, a lack of financing, and established foreign competition in PV technology. Recommendations to American PV manufacturers attempting to develop the Colombian market are given.

Characterization of responses and comparison of calibration factor for commercial MOSFET detectors.

PubMed

Bharanidharan, Ganesan; Manigandan, Durai; Devan, Krishnamurthy; Subramani, Vellaiyan; Gopishankar, Natanasabapathi; Ganesh, Tharmar; Joshi, Rakeshchander; Rath, Gourakishore; Velmurugan, Jagadeesan; Aruna, Prakasarao; Ganesan, Singaravelu

2005-01-01

A commercial metal oxide silicon field effect transistor (MOSFET) dosimeter of model TN502-RD has been characterized for its linearity, reproducibility, field size dependency, dose rate dependency, and angular dependency for Cobalt-60 (60Co), 6-MV, and 15-MV beam energies. The performance of the MOSFET clearly shows that it is highly reproducible, independent of field size and dose rate. Furthermore, MOSFET has a very high degree of linearity, with r-value>0.9 for all 3 energies. The calibration factor for 2 similar MOSFET detectors of model TN502-RD were also estimated and compared for all 3 energies. The calibration factor between the 2 similar MOSFET detectors shows a variation of about 1.8% for 60Co and 15 MV, and for 6 MV it shows variation of about 2.5%, indicating that calibration should be done whenever a new MOSFET is used. However, the detector shows considerable angular dependency of about 8.8% variation. This may be due to the variation in radiation sensitivity between flat and bubble sides of the MOSFET, and indicates that positional care must be taken while using MOSFET for stereotactic radiosurgery and stereotactic radiotherapy dosimetric applications.

13 CFR 121.1009 - What are the procedures for making the size determination?

Code of Federal Regulations, 2012 CFR

2012-01-01

... the size determination? 121.1009 Section 121.1009 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Procedures for Size.... The concern whose size is under consideration has the burden of establishing its small business size...

13 CFR 121.1009 - What are the procedures for making the size determination?

Code of Federal Regulations, 2013 CFR

2013-01-01

... the size determination? 121.1009 Section 121.1009 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Procedures for Size.... The concern whose size is under consideration has the burden of establishing its small business size...

13 CFR 121.1009 - What are the procedures for making the size determination?

Code of Federal Regulations, 2014 CFR

2014-01-01

... the size determination? 121.1009 Section 121.1009 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS SIZE REGULATIONS Size Eligibility Provisions and Standards Procedures for Size.... The concern whose size is under consideration has the burden of establishing its small business size...

Design of power-transmitting shifts

NASA Technical Reports Server (NTRS)

Loewenthal, S. H.

1984-01-01

Power transmission shafting which is a vital element of all rotating machinery is discussed. Design methods, based on strength considerations for sizing shafts and axles to withstand both steady and fluctuating loads are summarized. The effects of combined bending, torsional, and axial loads are considered along with many application factors that are known to influence the fatigue strength of shafting materials. Methods are presented to account for variable amplitude loading histories and their influence on limited life designs. The influences of shaft rigidity, materials, and vibration on the design are discussed.

Urban scaling and the production function for cities.

PubMed

Lobo, José; Bettencourt, Luís M A; Strumsky, Deborah; West, Geoffrey B

2013-01-01

The factors that account for the differences in the economic productivity of urban areas have remained difficult to measure and identify unambiguously. Here we show that a microscopic derivation of urban scaling relations for economic quantities vs. population, obtained from the consideration of social and infrastructural properties common to all cities, implies an effective model of economic output in the form of a Cobb-Douglas type production function. As a result we derive a new expression for the Total Factor Productivity (TFP) of urban areas, which is the standard measure of economic productivity per unit of aggregate production factors (labor and capital). Using these results we empirically demonstrate that there is a systematic dependence of urban productivity on city population size, resulting from the mismatch between the size dependence of wages and labor, so that in contemporary US cities productivity increases by about 11% with each doubling of their population. Moreover, deviations from the average scale dependence of economic output, capturing the effect of local factors, including history and other local contingencies, also manifest surprising regularities. Although, productivity is maximized by the combination of high wages and low labor input, high productivity cities show invariably high wages and high levels of employment relative to their size expectation. Conversely, low productivity cities show both low wages and employment. These results shed new light on the microscopic processes that underlie urban economic productivity, explain the emergence of effective aggregate urban economic output models in terms of labor and capital inputs and may inform the development of economic theory related to growth.

Urban Scaling and the Production Function for Cities

PubMed Central

Lobo, José; Bettencourt, Luís M. A.; Strumsky, Deborah; West, Geoffrey B.

2013-01-01

The factors that account for the differences in the economic productivity of urban areas have remained difficult to measure and identify unambiguously. Here we show that a microscopic derivation of urban scaling relations for economic quantities vs. population, obtained from the consideration of social and infrastructural properties common to all cities, implies an effective model of economic output in the form of a Cobb-Douglas type production function. As a result we derive a new expression for the Total Factor Productivity (TFP) of urban areas, which is the standard measure of economic productivity per unit of aggregate production factors (labor and capital). Using these results we empirically demonstrate that there is a systematic dependence of urban productivity on city population size, resulting from the mismatch between the size dependence of wages and labor, so that in contemporary US cities productivity increases by about 11% with each doubling of their population. Moreover, deviations from the average scale dependence of economic output, capturing the effect of local factors, including history and other local contingencies, also manifest surprising regularities. Although, productivity is maximized by the combination of high wages and low labor input, high productivity cities show invariably high wages and high levels of employment relative to their size expectation. Conversely, low productivity cities show both low wages and employment. These results shed new light on the microscopic processes that underlie urban economic productivity, explain the emergence of effective aggregate urban economic output models in terms of labor and capital inputs and may inform the development of economic theory related to growth. PMID:23544042

Socioeconomic factors of smallholder farmers’ behavior in biomass burning around palm oil plantation in Indonesia

NASA Astrophysics Data System (ADS)

Maswadi; Arifudin; Septiana, Nurmelati; Maulidi

2018-03-01

Indonesian peatland fires has been revealed as the cause of haze disaster in Indonesia, while oil palm plantation’s concesion owned both by companies and smallholder farmers are accused as the main cause of this problem, especially in practice of land clearing. It is very important to conduct research on socioeconomic factors of farmers’ behavior in burning the peatland, while peatland one of the megabiomass storage in nature. The research was conducted in Kalimantan barat, where in province has been choosen two villages as the sample. Observation, interview with quiestionare, and focus group discussion were used in collecting data. In term of analysing the data, regression analysis (ordinary least square) was performed using SPSS Program. The result show that: (1). The socio economics factor that are affecting the burning behavior, were extension’s activities, degree of knowledge, consideration to burn, degree of participation on organisation and degree of cosmopolite. On the other hand, degree of burning frequent, was affected by land productivity, extension activities, and degree of participation in organisation, and finally the size of land’ burning is affected by, the kind of burning’s activities, the mutual aid (social capital), consideration of land burning, degree of awarness, and degree participation on organization.

Temporal changes in phytoplankton biomass and cellular properties; implications for the IMO ballast water convention.

PubMed

de Castro, Maria Cecilia Trindade; Veldhuis, Marcel J W

2018-01-24

In the Wadden Sea, the Netherlands, and at L4 in the English Channel, UK, the size class distribution of phytoplankton was investigated with respect to the size range >10-≤50 µm identified by the IMO Ballast Water Convention. Size fractionation using 10 µm mesh filtration showed considerable size bias; 23.1% of >10 µm cells were still present in the <10 µm, but 21.8% of the smaller size cells were also retained on the mesh, resulting in an overestimated number of cells/mL by as much as a factor of 5.4. Flowcytometry measurements indicated that the phytoplankton in the size range 2-50  µm was dominated by the smaller size (<10 µm) at both sites. For the >10-≤50 µm size, these were on average 3.6% and 2% in the Wadden Sea and at L4, respectively. In terms of chlorophyll biomass, they represented 28.7% and 12%, respectively. The filtration method resulted in much higher chlorophyll values for 10-50  µm size range: 53.7% in the Wadden Sea and 38% at L4. This overestimation appears to be caused by cells in 6-10  µm size range being retained on the mesh. These findings are relevant in the context of the size class distribution based on flowcytometry and semi-quantification using chlorophyll as proxy for cell density.

Lifestyle measures in the management of gastro-oesophageal reflux disease: clinical and pathophysiological considerations.

PubMed

Kang, J H-E; Kang, J Y

2015-03-01

Several lifestyle and dietary factors are commonly cited as risk factors for gastro-oesophageal reflux disease (GORD) and modification of these factors has been advocated as first-line measures for the management of GORD. We performed a systematic review of the literature from 2005 to the present relating to the effect of these factors and their modification on GORD symptoms, physiological parameters of reflux as well as endoscopic appearances. Conflicting results existed for the association between smoking, alcohol and various dietary factors in the development of GORD. These equivocal findings are partly due to methodology problems. There is recent good evidence that weight reduction and smoking cessation are beneficial in reducing GORD symptoms. Clinical and physiological studies also suggest that some physical measures as well as modification of meal size and timing can also be beneficial. However, there is limited evidence for the role of avoiding alcohol and certain dietary ingredients including carbonated drinks, caffeine, fat, spicy foods, chocolate and mint.

Lifestyle measures in the management of gastro-oesophageal reflux disease: clinical and pathophysiological considerations

PubMed Central

Kang, J.H.-E.

2015-01-01

Several lifestyle and dietary factors are commonly cited as risk factors for gastro-oesophageal reflux disease (GORD) and modification of these factors has been advocated as first-line measures for the management of GORD. We performed a systematic review of the literature from 2005 to the present relating to the effect of these factors and their modification on GORD symptoms, physiological parameters of reflux as well as endoscopic appearances. Conflicting results existed for the association between smoking, alcohol and various dietary factors in the development of GORD. These equivocal findings are partly due to methodology problems. There is recent good evidence that weight reduction and smoking cessation are beneficial in reducing GORD symptoms. Clinical and physiological studies also suggest that some physical measures as well as modification of meal size and timing can also be beneficial. However, there is limited evidence for the role of avoiding alcohol and certain dietary ingredients including carbonated drinks, caffeine, fat, spicy foods, chocolate and mint. PMID:25729556

Musculoskeletal pain and discomfort and associated worker and organizational factors: a cross-sectional study.

PubMed

Stewart, Sasha K; Rothmore, Paul R; Doda, Diana V D; Hiller, Janet E; Mahmood, M A; Pisaniello, Dino L

2014-01-01

Musculoskeletal disorders are a leading cause of work-related ill health, and a major cost burden for the individual, industry and the community. Despite the broad range of risk factors that have been identified, most studies have focused only on specific occupations or categories of risk factors, meaning that there is limited understanding of the relative contributions of individual and organisational, physical and psychosocial factors. This cross-sectional survey of workers in medium-to-large workplaces in South Australia sought to examine a broad range of factors within various workplaces and industries. 404 workers from 29 workgroups and 23 separate companies participated in the research. Questionnaires were administered face-to-face, assessing demographic and job characteristics, safety climate, musculoskeletal pain and discomfort (MSPD) and job satisfaction. Potential predictors were grouped in terms of personal/job and organizational characteristics and associations with MSPD examined. A considerable proportion of workers (40%) had experienced MSPD in the last 7 days and 15% had experienced severe MSPD. In a multivariate model, four variables were found to be significantly associated with MSPD, namely being aged > or =40 years (adjusted odds ratio=1.73), overall job satisfaction (negatively associated) (AOR=0.37), medium (vs. large) company size (AOR=1.80) and workgroup safety climate score (negatively associated) (AOR=0.58). The results confirm a link between non-physical factors and work-related musculoskeletal disorders, suggesting that these factors should received increased attention as part of overall health and safety strategies. Organizations should give greater consideration to both the satisfaction of their employees and organizational factors that set the tone for safety climate.

Multilevel Factorial Experiments for Developing Behavioral Interventions: Power, Sample Size, and Resource Considerations†

PubMed Central

Dziak, John J.; Nahum-Shani, Inbal; Collins, Linda M.

2012-01-01

Factorial experimental designs have many potential advantages for behavioral scientists. For example, such designs may be useful in building more potent interventions, by helping investigators to screen several candidate intervention components simultaneously and decide which are likely to offer greater benefit before evaluating the intervention as a whole. However, sample size and power considerations may challenge investigators attempting to apply such designs, especially when the population of interest is multilevel (e.g., when students are nested within schools, or employees within organizations). In this article we examine the feasibility of factorial experimental designs with multiple factors in a multilevel, clustered setting (i.e., of multilevel multifactor experiments). We conduct Monte Carlo simulations to demonstrate how design elements such as the number of clusters, the number of lower-level units, and the intraclass correlation affect power. Our results suggest that multilevel, multifactor experiments are feasible for factor-screening purposes, because of the economical properties of complete and fractional factorial experimental designs. We also discuss resources for sample size planning and power estimation for multilevel factorial experiments. These results are discussed from a resource management perspective, in which the goal is to choose a design that maximizes the scientific benefit using the resources available for an investigation. PMID:22309956

Design Considerations of a Transverse Flux Machine for Direct-Drive Wind Turbine Applications: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husain, Tausif; Hasan, Iftekhar; Sozer, Yilmaz

This paper presents the design considerations of a double-sided transverse flux machine (TFM) for direct-drive wind turbine applications. The TFM has a modular structure with quasi-U stator cores and ring windings. The rotor is constructed with ferrite magnets in a flux-concentrating arrangement to achieve high air gap flux density. The design considerations for this TFM with respect to initial sizing, pole number selection, key design ratios, and pole shaping are presented in this paper. Pole number selection is critical in the design process of a TFM because it affects both the torque density and power factor under fixed magnetic andmore » changing electrical loading. Several key design ratios are introduced to facilitate the design procedure. The effect of pole shaping on back-emf and inductance is also analyzed. These investigations provide guidance toward the required design of a TFM for direct-drive applications. The analyses are carried out using analytical and three-dimensional finite element analysis. A prototype is under construction for experimental verification.« less

Design Considerations of a Transverse Flux Machine for Direct-Drive Wind Turbine Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husain, Tausif; Hasan, Iftekhar; Sozer, Yilmaz

This paper presents the design considerations of a double-sided transverse flux machine (TFM) for direct-drive wind turbine applications. The TFM has a modular structure with quasi-U stator cores and ring windings. The rotor is constructed with ferrite magnets in a flux-concentrating arrangement to achieve high air gap flux density. The design considerations for this TFM with respect to initial sizing, pole number selection, key design ratios, and pole shaping are presented in this paper. Pole number selection is critical in the design process of a TFM because it affects both the torque density and power factor under fixed magnetic andmore » changing electrical loading. Several key design ratios are introduced to facilitate the design procedure. The effect of pole shaping on back-emf and inductance is also analyzed. These investigations provide guidance toward the required design of a TFM for direct-drive applications. The analyses are carried out using analytical and three-dimensional finite element analysis. A prototype is under construction for experimental verification.« less

A Nomographic Methodology for Use in Performance Trade-Off Studies of Parabolic Dish Solar Power Modules

NASA Technical Reports Server (NTRS)

Selcuk, M. K.; Fujita, T.

1984-01-01

A simple graphical method was developed to undertake technical design trade-off studies for individual parabolic dish models comprising a two-axis tracking parabolic dish with a cavity receiver and power conversion assembly at the focal point. The results of these technical studies are then used in performing the techno-economic analyses required for determining appropriate subsystem sizing. Selected graphs that characterize the performance of subsystems within the module were arranged in the form of a nomogram that would enable an investigator to carry out several design trade-off studies. Key performance parameters encompassed in the nomogram include receiver losses, intercept factor, engine rating, and engine efficiency. Design and operation parameters such as concentrator size, receiver type (open or windowed aperture), receiver aperture size, operating temperature of the receiver and engine, engine partial load characteristics, concentrator slope error, and the type of reflector surface, are also included in the graphical solution. Cost considerations are not included.

The determination of total burn surface area: How much difference?

PubMed

Giretzlehner, M; Dirnberger, J; Owen, R; Haller, H L; Lumenta, D B; Kamolz, L-P

2013-09-01

Burn depth and burn size are crucial determinants for assessing patients suffering from burns. Therefore, a correct evaluation of these factors is optimal for adapting the appropriate treatment in modern burn care. Burn surface assessment is subject to considerable differences among clinicians. This work investigated the accuracy among experts based on conventional surface estimation methods (e.g. "Rule of Palm", "Rule of Nines" or "Lund-Browder Chart"). The estimation results were compared to a computer-based evaluation method. Survey data was collected during one national and one international burn conference. The poll confirmed deviations of burn depth/size estimates of up to 62% in relation to the mean value of all participants. In comparison to the computer-based method, overestimation of up to 161% was found. We suggest introducing improved methods for burn depth/size assessment in clinical routine in order to efficiently allocate and distribute the available resources for practicing burn care. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Influence of the confinement potential on the size-dependent optical response of metallic nanometric particles

NASA Astrophysics Data System (ADS)

Zapata-Herrera, Mario; Camacho, Ángela S.; Ramírez, Hanz Y.

2018-06-01

In this paper, different confinement potential approaches are considered in the simulation of size effects on the optical response of silver spheres with radii at the few nanometer scale. By numerically obtaining dielectric functions from different sets of eigenenergies and eigenstates, we simulate the absorption spectrum and the field enhancement factor for nanoparticles of various sizes, within a quantum framework for both infinite and finite potentials. The simulations show significant dependence on the sphere radius of the dipolar surface plasmon resonance, as a direct consequence of energy discretization associated to the strong confinement experienced by conduction electrons in small nanospheres. Considerable reliance of the calculated optical features on the chosen wave functions and transition energies is evidenced, so that discrepancies in the plasmon resonance frequencies obtained with the three studied models reach up to above 30%. Our results are in agreement with reported measurements and shade light on the puzzling shift of the plasmon resonance in metallic nanospheres.

Mechanisms causing size differences of the land hermit crab Coenobita rugosus among eco-islands in Southern Taiwan.

PubMed

Hsu, Chia-Hsuan; Soong, Keryea

2017-01-01

Numerous environmental factors can influence body size. Comparing populations in different ecological contexts is one potential approach to elucidating the most critical of such factors. In the current study, we found that the body size of the land hermit crab Coenobita rugosus was significantly larger on Dongsha Island in the South China Sea than on other eco-islands around Southern Taiwan. We hypothesized that this could be due to differences in (1) shell resources, (2) parasite impact, (3) competition, (4) predation, and (5) food. We found no supporting evidence for the first three hypotheses; the shells used by the hermit crabs on Dongsha were in poorer condition than were those used elsewhere, extremely few individuals in the region had ectoparasites, and the density of hermit crabs varied considerably among localities within each island. However, significantly higher percentages of C. rugosus reached age 3 years on Dongsha than at Siziwan bay in Taiwan. Two growth rate indices inferred from size structures suggested faster growth on Dongsha than at Siziwan. The condition index (i.e., the body mass/shield length ratio of C. rugosus) was also greater on Dongsha than at Siziwan. Therefore, Dongsha hermit crabs seem to have superior diet and growth performance. Seagrass debris accumulation at the shore of Dongsha was considerable, whereas none was observed at Siziwan or on the other islands, where dicot leaves were the dominant food item for the vegetarian hermit crabs. We then experimentally evaluated the possible role of seagrass as food for C. rugosus. The crabs on Dongsha preferred seagrass to dicot leaves, and their growth increment was faster when they fed on seagrass than when they fed on dicot leaves; no such differences were found in the Siziwan hermit crabs. The aforementioned results are compatible with the food hypothesis explaining the size differences among the islands. The predator hypothesis could explain the greater life span but not the other findings. Populations of C. rugosus on islands with seagrass debris piles probably contribute more to the gene pool of the species because higher proportions of these populations could achieve high fecundity. The fate of these terrestrial hermit crabs may rely on the health of underwater seagrass ecosystems that are under threat from global change.

Stiffness of frictional contact of dissimilar elastic solids

DOE PAGES

Lee, Jin Haeng; Gao, Yanfei; Bower, Allan F.; ...

2017-12-22

The classic Sneddon relationship between the normal contact stiffness and the contact size is valid for axisymmetric, frictionless contact, in which the two contacting solids are approximated by elastic half-spaces. Deviation from this result critically affects the accuracy of the load and displacement sensing nanoindentation techniques. This study gives a thorough numerical and analytical investigation of corrections needed to the Sneddon solution when finite Coulomb friction exists between an elastic half-space and a flat-ended rigid punch with circular or noncircular shape. Because of linearity of the Coulomb friction, the correction factor is found to be a function of the frictionmore » coefficient, Poisson's ratio, and the contact shape, but independent of the contact size. Two issues are of primary concern in the finite element simulations – adequacy of the mesh near the contact edge and the friction implementation methodology. Although the stick or slip zone sizes are quite different from the penalty or Lagrangian methods, the calculated contact stiffnesses are almost the same and may be considerably larger than those in Sneddon's solution. For circular punch contact, the numerical solutions agree remarkably well with a previous analytical solution. For non-circular punch contact, the results can be represented using the equivalence between the contact problem and bi-material fracture mechanics. Finally, the correction factor is found to be a product of that for the circular contact and a multiplicative factor that depends only on the shape of the punch but not on the friction coefficient or Poisson's ratio.« less

Stiffness of frictional contact of dissimilar elastic solids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Jin Haeng; Gao, Yanfei; Bower, Allan F.

The classic Sneddon relationship between the normal contact stiffness and the contact size is valid for axisymmetric, frictionless contact, in which the two contacting solids are approximated by elastic half-spaces. Deviation from this result critically affects the accuracy of the load and displacement sensing nanoindentation techniques. This study gives a thorough numerical and analytical investigation of corrections needed to the Sneddon solution when finite Coulomb friction exists between an elastic half-space and a flat-ended rigid punch with circular or noncircular shape. Because of linearity of the Coulomb friction, the correction factor is found to be a function of the frictionmore » coefficient, Poisson's ratio, and the contact shape, but independent of the contact size. Two issues are of primary concern in the finite element simulations – adequacy of the mesh near the contact edge and the friction implementation methodology. Although the stick or slip zone sizes are quite different from the penalty or Lagrangian methods, the calculated contact stiffnesses are almost the same and may be considerably larger than those in Sneddon's solution. For circular punch contact, the numerical solutions agree remarkably well with a previous analytical solution. For non-circular punch contact, the results can be represented using the equivalence between the contact problem and bi-material fracture mechanics. Finally, the correction factor is found to be a product of that for the circular contact and a multiplicative factor that depends only on the shape of the punch but not on the friction coefficient or Poisson's ratio.« less

Clinicopathologic Features of Polypoid Lesions of the Gallbladder and Risk Factors of Gallbladder Cancer

PubMed Central

Kwon, Wooil; Lee, Seung Eun; Hwang, Dae Wook; Kim, Sun-Whe

2009-01-01

It is difficult to differentiate benign and malignancy in polypoid lesions of the gallbladder (PLG) by solely depending on imaging studies. Therefore clinicopathologic features of benign and malignant polyps are compared in an attempt to identify the risk factors of malignant polypoid lesions. The medical records of 291 patients who were confirmed to have PLG through cholecystectomy were reviewed and analyzed for age, sex, symptom, associated gallstone, morphology of PLG, size of PLG, number of PLG, and preoperative tumor markers. Benign PLG was found in 256 patients (88.0%) and malignant PLG in 35 patients (12.0%). Compared with benign group, the malignant group were older (61.1 yr vs. 47.1 yr, P<0.001), more often accompanied with symptoms (62.9% vs. 28.9%, P<0.001). Malignant PLG tended to be sessile (60.0% vs. 10.5%, P<0.001), larger (28.0 mm vs. 8.6 mm, P<0.001) and single lesion (65.7% vs. 44.1%, P<0.016). Age over 60 yr (P=0.021, odds ratio [OR], 8.16), sessile morphology (P<0.001, OR, 7.70), and size over 10 mm (P=0.009, OR, 8.87) were identified as risk factors for malignant PLG. Careful decision making on therapeutic plans should be made with consideration of malignancy for patients over 60 yr, with sessile morphology of PLG, and with PLG size of over 10 mm. PMID:19543513

Community Size Effects on Epidemic Spreading in Multiplex Social Networks.

PubMed

Liu, Ting; Li, Ping; Chen, Yan; Zhang, Jie

2016-01-01

The dynamical process of epidemic spreading has drawn much attention of the complex network community. In the network paradigm, diseases spread from one person to another through the social ties amongst the population. There are a variety of factors that govern the processes of disease spreading on the networks. A common but not negligible factor is people's reaction to the outbreak of epidemics. Such reaction can be related information dissemination or self-protection. In this work, we explore the interactions between disease spreading and population response in terms of information diffusion and individuals' alertness. We model the system by mapping multiplex networks into two-layer networks and incorporating individuals' risk awareness, on the assumption that their response to the disease spreading depends on the size of the community they belong to. By comparing the final incidence of diseases in multiplex networks, we find that there is considerable mitigation of diseases spreading for full phase of spreading speed when individuals' protection responses are introduced. Interestingly, the degree of community overlap between the two layers is found to be critical factor that affects the final incidence. We also analyze the consequences of the epidemic incidence in communities with different sizes and the impacts of community overlap between two layers. Specifically, as the diseases information makes individuals alert and take measures to prevent the diseases, the effective protection is more striking in small community. These phenomena can be explained by the multiplexity of the networked system and the competition between two spreading processes.

Community Size Effects on Epidemic Spreading in Multiplex Social Networks

PubMed Central

Liu, Ting; Li, Ping; Chen, Yan; Zhang, Jie

2016-01-01

The dynamical process of epidemic spreading has drawn much attention of the complex network community. In the network paradigm, diseases spread from one person to another through the social ties amongst the population. There are a variety of factors that govern the processes of disease spreading on the networks. A common but not negligible factor is people’s reaction to the outbreak of epidemics. Such reaction can be related information dissemination or self-protection. In this work, we explore the interactions between disease spreading and population response in terms of information diffusion and individuals’ alertness. We model the system by mapping multiplex networks into two-layer networks and incorporating individuals’ risk awareness, on the assumption that their response to the disease spreading depends on the size of the community they belong to. By comparing the final incidence of diseases in multiplex networks, we find that there is considerable mitigation of diseases spreading for full phase of spreading speed when individuals’ protection responses are introduced. Interestingly, the degree of community overlap between the two layers is found to be critical factor that affects the final incidence. We also analyze the consequences of the epidemic incidence in communities with different sizes and the impacts of community overlap between two layers. Specifically, as the diseases information makes individuals alert and take measures to prevent the diseases, the effective protection is more striking in small community. These phenomena can be explained by the multiplexity of the networked system and the competition between two spreading processes. PMID:27007112

Stiffness of frictional contact of dissimilar elastic solids

NASA Astrophysics Data System (ADS)

Lee, Jin Haeng; Gao, Yanfei; Bower, Allan F.; Xu, Haitao; Pharr, George M.

2018-03-01

The classic Sneddon relationship between the normal contact stiffness and the contact size is valid for axisymmetric, frictionless contact, in which the two contacting solids are approximated by elastic half-spaces. Deviation from this result critically affects the accuracy of the load and displacement sensing nanoindentation techniques. This paper gives a thorough numerical and analytical investigation of corrections needed to the Sneddon solution when finite Coulomb friction exists between an elastic half-space and a flat-ended rigid punch with circular or noncircular shape. Because of linearity of the Coulomb friction, the correction factor is found to be a function of the friction coefficient, Poisson's ratio, and the contact shape, but independent of the contact size. Two issues are of primary concern in the finite element simulations - adequacy of the mesh near the contact edge and the friction implementation methodology. Although the stick or slip zone sizes are quite different from the penalty or Lagrangian methods, the calculated contact stiffnesses are almost the same and may be considerably larger than those in Sneddon's solution. For circular punch contact, the numerical solutions agree remarkably well with a previous analytical solution. For non-circular punch contact, the results can be represented using the equivalence between the contact problem and bi-material fracture mechanics. The correction factor is found to be a product of that for the circular contact and a multiplicative factor that depends only on the shape of the punch but not on the friction coefficient or Poisson's ratio.

Critical factors in the establishment of allopolyploids.

PubMed

Fowler, Norma L; Levin, Donald A

2016-07-01

The growth and spread of new polyploid populations have been explained in terms of fitness advantages over their diploid progenitors. However, a fitness advantage is not sufficient to insure the establishment of a polyploid; it must also overcome the obstacles of demographic stochasticity and minority disadvantage. Several studies have addressed the population dynamics of autopolyploids, but the present study is the first to consider allopolyploids, which are affected by more factors than autopolyploids. We constructed a population dynamic model of four types of plants (two parent species, hybrids, allopolyploids) that also included an explicit breeding system. The numbers of plants of each type were the most important factors determining whether the new allopolyploid would become established. More polyploid plants greatly increased the likelihood of polyploid persistence. More plants of the parent species and more hybrids resulted in more polyploids being produced. The model parameters with the most effect on polyploid establishment were potential population size (K), individual plant fecundity, and niche separation (α). The most important breeding system parameters were selfing rates, which mitigated minority disadvantage imposed by pollen limitation. The importance of population sizes, and the parameters that controlled them, in overcoming demographic stochasticity parallels the well-recognized role of propagule pressure in determining the success of invasive species. We modeled the establishment of a new allopolyploid; analogous considerations would affect the establishment of a new autopolyploid. The critical role of population sizes in polyploid establishment should be more widely recognized. © 2016 Botanical Society of America.

A novel synthesis of a new thorium (IV) metal organic framework nanostructure with well controllable procedure through ultrasound assisted reverse micelle method.

PubMed

Sargazi, Ghasem; Afzali, Daryoush; Mostafavi, Ali

2018-03-01

Reverse micelle (RM) and ultrasound assisted reverse micelle (UARM) were applied to the synthesis of novel thorium nanostructures as metal organic frameworks (MOFs). Characterization with different techniques showed that the Th-MOF sample synthesized by UARM method had higher thermal stability (354°C), smaller mean particle size (27nm), and larger surface area (2.02×10 3 m 2 /g). Besides, in this novel approach, the nucleation of crystals was found to carry out in a shorter time. The synthesis parameters of UARM method were designed by 2 k-1 factorial and the process control was systematically studied using analysis of variance (ANOVA) and response surface methodology (RSM). ANOVA showed that various factors, including surfactant content, ultrasound duration, temperature, ultrasound power, and interaction between these factors, considerably affected different properties of the Th-MOF samples. According to the 2 k-1 factorial design, the determination coefficient (R 2 ) of the model is 0.999, with no significant lack of fit. The F value of 5432, implied that the model was highly significant and adequate to represent the relationship between the responses and the independent variables, also the large R-adjusted value indicates a good relationship between the experimental data and the fitted model. RSM predicted that it would be possible to produce Th-MOF samples with the thermal stability of 407°C, mean particle size of 13nm, and surface area of 2.20×10 3 m 2 /g. The mechanism controlling the Th-MOF properties was considerably different from the conventional mechanisms. Moreover, the MOF sample synthesized using UARM exhibited higher capacity for nitrogen adsorption as a result of larger pore sizes. It is believed that the UARM method and systematic studies developed in the present work can be considered as a new strategy for their application in other nanoscale MOF samples. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparative support for the expensive tissue hypothesis: Big brains are correlated with smaller gut and greater parental investment in Lake Tanganyika cichlids.

PubMed

Tsuboi, Masahito; Husby, Arild; Kotrschal, Alexander; Hayward, Alexander; Buechel, Séverine D; Zidar, Josefina; Løvlie, Hanne; Kolm, Niclas

2015-01-01

The brain is one of the most energetically expensive organs in the vertebrate body. Consequently, the energetic requirements of encephalization are suggested to impose considerable constraints on brain size evolution. Three main hypotheses concerning how energetic constraints might affect brain evolution predict covariation between brain investment and (1) investment into other costly tissues, (2) overall metabolic rate, and (3) reproductive investment. To date, these hypotheses have mainly been tested in homeothermic animals and the existing data are inconclusive. However, there are good reasons to believe that energetic limitations might play a role in large-scale patterns of brain size evolution also in ectothermic vertebrates. Here, we test these hypotheses in a group of ectothermic vertebrates, the Lake Tanganyika cichlid fishes. After controlling for the effect of shared ancestry and confounding ecological variables, we find a negative association between brain size and gut size. Furthermore, we find that the evolution of a larger brain is accompanied by increased reproductive investment into egg size and parental care. Our results indicate that the energetic costs of encephalization may be an important general factor involved in the evolution of brain size also in ectothermic vertebrates. © 2014 The Author(s). Evolution © 2014 The Society for the Study of Evolution.

Correlated evolution of host and parasite body size: tests of Harrison's rule using birds and lice.

PubMed

Johnson, Kevin P; Bush, Sarah E; Clayton, Dale H

2005-08-01

Large-bodied species of hosts often harbor large-bodied parasites, a pattern known as Harrison's rule. Harrison's rule has been documented for a variety of animal parasites and herbivorous insects, yet the adaptive basis of the body-size correlation is poorly understood. We used phylogenetically independent methods to test for Harrison's rule across a large assemblage of bird lice (Insecta: Phthiraptera). The analysis revealed a significant relationship between louse and host size, despite considerable variation among taxa. We explored factors underlying this variation by testing Harrison's rule within two groups of feather-specialist lice that share hosts (pigeons and doves). The two groups, wing lice (Columbicola spp.) and body lice (Physconelloidinae spp.), have similar life histories, despite spending much of their time on different feather tracts. Wing lice showed strong support for Harrison's rule, whereas body lice showed no significant correlation with host size. Wing louse size was correlated with wing feather size, which was in turn correlated with overall host size. In contrast, body louse size showed no correlation with body feather size, which also was not correlated with overall host size. The reason why body lice did not fit Harrison's rule may be related to the fact that different species of body lice use different microhabitats within body feathers. More detailed measurements of body feathers may be needed to explore the precise relationship of body louse size to relevant components of feather size. Whatever the reason, Harrison's rule does not hold in body lice, possibly because selection on body size is mediated by community-level interactions between body lice.

Size distribution and concentrations of heavy metals in atmospheric aerosols originating from industrial emissions as predicted by the HYSPLIT model

NASA Astrophysics Data System (ADS)

Chen, Bing; Stein, Ariel F.; Maldonado, Pabla Guerrero; Sanchez de la Campa, Ana M.; Gonzalez-Castanedo, Yolanda; Castell, Nuria; de la Rosa, Jesus D.

2013-06-01

This study presents a description of the emission, transport, dispersion, and deposition of heavy metals contained in atmospheric aerosols emitted from a large industrial complex in southern Spain using the HYSPLIT model coupled with high- (MM5) and low-resolution (GDAS) meteorological simulations. The dispersion model was configured to simulate eight size fractions (<0.33, 0.66, 1.3, 2.5, 5, 14, 17, and >17 μm) of metals based on direct measurements taken at the industrial emission stacks. Twelve stacks in four plants were studied and the stacks showed considerable differences for both emission fluxes and size ranges of metals. We model the dispersion of six major metals; Cr, Co, Ni, La, Zn, and Mo, which represent 77% of the total mass of the 43 measured elements. The prediction shows that the modeled industrial emissions produce an enrichment of heavy metals by a factor of 2-5 for local receptor sites when compared to urban and rural background areas in Spain. The HYSPLIT predictions based on the meteorological fields from MM5 show reasonable consistence with the temporal evolution of concentrations of Cr, Co, and Ni observed at three sites downwind of the industrial area. The magnitude of concentrations of metals at two receptors was underestimated for both MM5 (by a factor of 2-3) and GDAS (by a factor of 4-5) meteorological runs. The model prediction shows that heavy metal pollution from industrial emissions in this area is dominated by the ultra-fine (<0.66 μm) and fine (<2.5 μm) size fractions.

Shear-wave elastography in the diagnosis of solid breast masses: what leads to false-negative or false-positive results?

PubMed

Yoon, Jung Hyun; Jung, Hae Kyoung; Lee, Jong Tae; Ko, Kyung Hee

2013-09-01

To investigate the factors that have an effect on false-positive or false-negative shear-wave elastography (SWE) results in solid breast masses. From June to December 2012, 222 breast lesions of 199 consecutive women (mean age: 45.3 ± 10.1 years; range, 21 to 88 years) who had been scheduled for biopsy or surgical excision were included. Greyscale ultrasound and SWE were performed in all women before biopsy. Final ultrasound assessments and SWE parameters (pattern classification and maximum elasticity) were recorded and compared with histopathology results. Patient and lesion factors in the 'true' and 'false' groups were compared. Of the 222 masses, 175 (78.8 %) were benign, and 47 (21.2 %) were malignant. False-positive rates of benign masses were significantly higher than false-negative rates of malignancy in SWE patterns, 36.6 % to 6.4 % (P < 0.001). Among both benign and malignant masses, factors showing significance among false SWE features were lesion size, breast thickness and lesion depth (all P < 0.05). All 47 malignant breast masses had SWE images of good quality. False SWE features were more significantly seen in benign masses. Lesion size, breast thickness and lesion depth have significance in producing false results, and this needs consideration in SWE image acquisition. • Shear-wave elastography (SWE) is widely used during breast imaging • At SWE, false-positive rates were significantly higher than false-negative rates • Larger size, breast thickness, depth and fair quality influences false-positive SWE features • Smaller size, larger breast thickness and depth influences false-negative SWE features.

Additive manufacturing of magnetic shielding and ultra-high vacuum flange for cold atom sensors.

PubMed

Vovrosh, Jamie; Voulazeris, Georgios; Petrov, Plamen G; Zou, Ji; Gaber, Youssef; Benn, Laura; Woolger, David; Attallah, Moataz M; Boyer, Vincent; Bongs, Kai; Holynski, Michael

2018-01-31

Recent advances in the understanding and control of quantum technologies, such as those based on cold atoms, have resulted in devices with extraordinary metrological performance. To realise this potential outside of a lab environment the size, weight and power consumption need to be reduced. Here we demonstrate the use of laser powder bed fusion, an additive manufacturing technique, as a production technique relevant to the manufacture of quantum sensors. As a demonstration we have constructed two key components using additive manufacturing, namely magnetic shielding and vacuum chambers. The initial prototypes for magnetic shields show shielding factors within a factor of 3 of conventional approaches. The vacuum demonstrator device shows that 3D-printed titanium structures are suitable for use as vacuum chambers, with the test system reaching base pressures of 5 ± 0.5 × 10 -10 mbar. These demonstrations show considerable promise for the use of additive manufacturing for cold atom based quantum technologies, in future enabling improved integrated structures, allowing for the reduction in size, weight and assembly complexity.

Land use, macroalgae, and a tumor-forming disease in marine turtles.

PubMed

Van Houtan, Kyle S; Hargrove, Stacy K; Balazs, George H

2010-09-29

Wildlife diseases are an increasing concern for endangered species conservation, but their occurrence, causes, and human influences are often unknown. We analyzed 3,939 records of stranded Hawaiian green sea turtles (Chelonia mydas) over 28 years to understand fibropapillomatosis, a tumor-forming disease linked to a herpesvirus. Turtle size is a consistent risk factor and size-standardized models revealed considerable spatial and temporal variability. The disease peaked in some areas in the 1990s, in some regions rates remained constant, and elsewhere rates increased. Land use, onshore of where the turtles feed, may play a role. Elevated disease rates were clustered in watersheds with high nitrogen-footprints; an index of natural and anthropogenic factors that affect coastal eutrophication. Further analysis shows strong epidemiological links between disease rates, nitrogen-footprints, and invasive macroalgae and points to foraging ecology. These turtles now forage on invasive macroalgae, which can dominate nutrient rich waters and sequester environmental N in the amino acid arginine. Arginine is known to regulate immune activity, promote herpesviruses, and contribute to tumor formation. Our results have implications for understanding diseases in aquatic organisms, eutrophication, herpesviruses, and tumor formation.

Prevalence and risk factors for Maedi-Visna in sheep farms in Mecklenburg-Western-Pomerania.

PubMed

Hüttner, Klim; Seelmann, Matthias; Feldhusen, Frerk

2010-01-01

Despite indications of a considerable spread of Maedi-Visna among sheep flocks in Germany, prevalence studies of this important infection are hardly available. Prior to any health schemes and guidelines, knowledge about regional disease distribution is essential. Depending upon herd size, 70 farms were randomly selected, of which 41 cooperated. A total of 2229 blood samples were taken at random and serologically examined. For assessment of selected farm characteristics a questionnaire exercise was conducted at all farms involved. The average herd prevalence is 51.2%, the within-herd prevalence is 28,8%. In the unvariate analysis of risk factors, small (10-100 sheep) and large (> 250 sheep) farms are more MVV-affected than medium sized farms. The average stable and pasture space per sheep is larger at non-infected- compared to infected farms. Owners judgement on general herd health turns out to be better at non-infected compared to infected farms. Taking infected farms only, the risk of within-herd prevalence above 20% is significant higher in crossbred than in purebred flocks.

Hydrogel scaffolds for tissue engineering: Progress and challenges

PubMed Central

El-Sherbiny, Ibrahim M.; Yacoub, Magdi H.

2013-01-01

Designing of biologically active scaffolds with optimal characteristics is one of the key factors for successful tissue engineering. Recently, hydrogels have received a considerable interest as leading candidates for engineered tissue scaffolds due to their unique compositional and structural similarities to the natural extracellular matrix, in addition to their desirable framework for cellular proliferation and survival. More recently, the ability to control the shape, porosity, surface morphology, and size of hydrogel scaffolds has created new opportunities to overcome various challenges in tissue engineering such as vascularization, tissue architecture and simultaneous seeding of multiple cells. This review provides an overview of the different types of hydrogels, the approaches that can be used to fabricate hydrogel matrices with specific features and the recent applications of hydrogels in tissue engineering. Special attention was given to the various design considerations for an efficient hydrogel scaffold in tissue engineering. Also, the challenges associated with the use of hydrogel scaffolds were described. PMID:24689032

Experimental lead poisoning in Turkey Vultures, Cathartes aura

USGS Publications Warehouse

Carpenter, J.W.; Pattee, O.H.; Fritts, S.H.; Rattner, B.A.; Wiemeyer, Stanley N.; Royle, J. Andrew; Smith, M.R.

2003-01-01

Lead-induced mortality appears to have been a major factor in the decline of the California condor, Gymnogyps californianus. We orally dosed turkey vultures (Cathartes aura) with BB-sized lead shot from January 1988 through July 1988 to determine physiological response (delta-aminolevulinic acid dehydratase inhibition, erythrocyte protoporphyrin levels, anemia), diagnostic tissue lead concentrations (blood, liver, and kidney), and comparative sensitivity of this species. Two turkey vultures died and two became so intoxicated they were euthanized. Overall, responses of measured parameters were comparable to other species exposed to lead although there was considerable individual variation. Survival time (143-211 days), even with the large number of shot and constant redosing, was much longer than reported for other species of birds, suggesting considerable tolerance by turkey vultures to the deleterious effects of lead ingestion. Based on these observations, turkey vultures appear to be poor models for assessing the risk of lead poisoning to California condors or predicting their physiological response.

Analysis of the effects of wing interference on the tail contributions to the rolling derivatives

NASA Technical Reports Server (NTRS)

Michael, William H , Jr

1952-01-01

An analysis of the effects of wing interference on the tail contributions to the rolling stability derivatives of complete airplane configurations is made by calculating the angularity of the air stream at the vertical tail due to rolling and determining the resulting forces and moments. Some of the important factors which affect the resultant angularity on the vertical tail are wing aspect ratio and sweepback, vertical-tail span, and considerations associated with angle of attack and airplane geometry. Some calculated sidewash results for a limited range of plan forms and vertical-tail sizes are presented. Equations taking into account the sidewash results are given for determining the tail contributions to the rolling derivatives. Comparisons of estimated and experimental results indicate that a consideration of wing interference effects improves the estimated values of the tail contributions to the rolling derivatives and that fair agreement with available experimental data is obtained.

Total hip replacement for hip fracture: Surgical techniques and concepts.

PubMed

Coomber, Ross; Porteous, Matthew; Hubble, Matthew J W; Parker, Martyn J

2016-10-01

When treating a hip fracture with a total hip replacement (THR) the surgical technique may differ in a number of aspects in comparison to elective arthroplasty. The hip fracture patient is more likely to have poor bone stock secondary to osteoporosis, be older, have a greater number of co-morbidities, and have had limited peri-operative work-up. These factors lead to a higher risk of complications, morbidity and perioperative mortality. Consideration should be made to performing the THR in a laminar flow theatre, by a surgeon experienced in total hip arthroplasty, using an anterolateral approach, cementing the implant in place, using a large head size and with repair of the joint capsule. Combined Ortho-geriatric care is recommended with similar post-operative rehabilitation to elective THR patients but with less expectation of short length of stay and consideration for fracture prevention measures. Copyright © 2016. Published by Elsevier Ltd.

Workhorse Flaps in Chest Wall Reconstruction: The Pectoralis Major, Latissimus Dorsi, and Rectus Abdominis Flaps

PubMed Central

Bakri, Karim; Mardini, Samir; Evans, Karen K.; Carlsen, Brian T.; Arnold, Phillip G.

2011-01-01

Large and life-threatening thoracic cage defects can result from the treatment of traumatic injuries, tumors, infection, congenital anomalies, and radiation injury and require prompt reconstruction to restore respiratory function and soft tissue closure. Important factors for consideration are coverage with healthy tissue to heal a wound, the potential alteration in respiratory mechanics created by large extirpations or nonhealing thoracic wounds, and the need for immediate coverage for vital structures. The choice of technique depends on the size and extent of the defect, its location, and donor site availability with consideration to previous thoracic or abdominal operations. The focus of this article is specifically to describe the use of the pectoralis major, latissimus dorsi, and rectus abdominis muscle flaps for reconstruction of thoracic defects, as these are the workhorse flaps commonly used for chest wall reconstruction. PMID:22294942

Structural design considerations for a Personnel Launch System

NASA Technical Reports Server (NTRS)

Bush, Lance B.; Lentz, Christopher A.; Robinson, James C.; Macconochie, Ian O.

1990-01-01

A vehicle capable of performing the transfer of eight people to and from the Space Station Freedom is currently in the conceptual/preliminary design stages at the NASA Langley Research Center. Structural definition of this Personnel Launch System (PLS) and the considerations leading to it are described. Issues such as cost, technology level, human factors, and maintainability are used as guidelines for the structural definition. A synergistic design technique involving aerodynamics, performance, mission, packaging, and weights and sizing analyses is utilized to evaluate the structural design. A closed-loop design is achieved when the mission requirements are met by each previously mentioned analysis for a particular vehicle weight. Although satisfactory, the structural concept presented herein is not to be treated as a final answer, but one promising solution. An examination of alternative designs and more detailed analyses can be undertaken in order to identify design inadequacies and more efficient approaches.

Shielding Effect of Lead Glasses on Radiologists' Eye Lens Exposure in Interventional Procedures.

PubMed

Hu, Panpan; Kong, Yan; Chen, Bo; Liu, Qianqian; Zhuo, Weihai; Liu, Haikuan

2017-04-20

To study the shielding effect of radiologists' eye lens with lead glasses of different equivalent thicknesses and sizes in interventional radiology procedures. Using the human voxel phantom with a more accurate model of the eye and MCNPX software, eye lens doses of the radiologists who wearing different kinds of lead glasses were simulated, different beam projections were taken into consideration during the simulation. Measurements were also performed with the physical model to verify simulation results. Simulation results showed that the eye lens doses were reduced by a factor from 3 to 9 when wearing a 20 cm2-sized lead glasses with the equivalent thickness ranging from 0.1 to 1.0 mm Pb. The increase of dose reduction factor (DRF) was not significant whenever increase the lead equivalent of glasses of which larger than 0.35 mm. Furthermore, the DRF was proportional to the size of glass lens from 6 to 30 cm2 with the same lead equivalent. The simulation results were in well agreements with the measured ones. For more reasonable and effective protection of the eye lens of interventional radiologists, a pair of glasses with a lead equivalent of 0.5 mm Pb and large-sized (at least 27 cm2 per glass) lens are recommended. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Risk mapping of bovine hypodermosis using geographical information system (GIS) in cattle of subtropical region, Pakistan.

PubMed

Khan, Mobushir Riaz; Ahmed, Haroon; Panadero-Fontan, Rosario; Lopez-Sandez, Ceferino; Khan, Muhammad Aamir; Asif, Saira; Mustafa, Irfan; Ali, Muhammad Isthiaq; Raza, Hamid; Qayyum, Mazhar

2015-08-29

Hypodermosis is an ectoparasitic disease of cattle caused by Hypoderma lineatum and Hypoderma bovis. It is an important health problem of cattle, leading to considerable economic losses. There are various factors that are involved in the spread of this disease such as herd size, location, temperature, humidity, and precipitation. Blood samples from 112 herds were collected to determine the presence of Hypoderma spp. infestation. For these herds, size and location were determined; temperature, humidity, and precipitation data were obtained from meteorological stations; and topographic features were obtained from existing maps and through field work. A regression analysis was then used to generate a risk factor analysis profile for hypodermosis and geographic information system (GIS) was used to map the risks. The GIS map developed showed the degree of infestation in different geographical locations at district and village levels. Cluster analysis demonstrated that hypodermosis prevalence varied within zones and across zones. The regression analysis showed that the temperature in the months of January, February, March, August, and November, and the precipitation in September and October had significant results (p < 0.05) when all the risks factors were analyzed. It is concluded that different ecological factors have an important impact on the intensity and infestation rate of hypodermosis across the globe. The present study might be used to control and eradicate the hypodermosis across the globe.

Decreased pain sensitivity due to trimethylbenzene exposure ...

EPA Pesticide Factsheets

Traditionally, human health risk assessments have relied on qualitative approaches for hazard identification, often using the Hill criteria and weight of evidence determinations to integrate data from multiple studies. Recently, the National Research Council has recommended the development of quantitative approaches for evidence integration, including the application of meta-analyses. The following hazard identification case study applies qualitative as well as meta-analytic approaches to trimethylbenzene (TMB) isomers exposure and the potential neurotoxic effects on pain sensitivity. In the meta-analytic approach, a pooled effect size is calculated, after consideration of multiple confounding factors, in order to determine whether the entire database under consideration indicates that TMBs are likely to be a neurotoxic hazard. The pain sensitivity studies included in the present analyses initially seem discordant in their results: effects on pain sensitivity are seen immediately after termination of exposure, appear to resolve 24 hours after exposure, and then reappear 50 days later following foot-shock. Qualitative consideration of toxicological and toxicokinetic characteristics of the TMB isomers suggests that the observed differences between studies are due to testing time and can be explained through a complete consideration of the underlying biology of the effect and the nervous system as a whole. Meta-analyses and –regressions support this conclus

Population Variation Reveals Independent Selection toward Small Body Size in Chinese Debao Pony

PubMed Central

Kader, Adiljan; Li, Yan; Dong, Kunzhe; Irwin, David M.; Zhao, Qianjun; He, Xiaohong; Liu, Jianfeng; Pu, Yabin; Gorkhali, Neena Amatya; Liu, Xuexue; Jiang, Lin; Li, Xiangchen; Guan, Weijun; Zhang, Yaping; Wu, Dong-Dong; Ma, Yuehui

2016-01-01

Body size, one of the most important quantitative traits under evolutionary scrutiny, varies considerably among species and among populations within species. Revealing the genetic basis underlying this variation is very important, particularly in humans where there is a close relationship with diseases and in domestic animals as the selective patterns are associated with improvements in production traits. The Debao pony is a horse breed with small body size that is unique to China; however, it is unknown whether the size-related candidate genes identified in Western breeds also account for the small body size of the Debao pony. Here, we compared individual horses from the Debao population with other two Chinese horse populations using single nucleotide polymorphisms (SNPs) identified with the Equine SNP 65 Bead Chip. The previously reported size-related candidate gene HMGA2 showed a significant signature for selection, consistent with its role observed in human populations. More interestingly, we found a candidate gene TBX3, which had not been observed in previous studies on horse body size that displayed the highest differentiation and most significant association, and thus likely is the dominating factor for the small stature of the Debao pony. Further comparison between the Debao pony and other breeds of horses from around the world demonstrated that TBX3 was selected independently in the Debao pony, suggesting that there were multiple origins of small stature in the horse. PMID:26637467

What factors influence physiotherapy service provision in rural communities? A pilot study.

PubMed

Adams, Robyn; Sheppard, Lorraine; Jones, Anne; Lefmann, Sophie

2014-06-01

To obtain stakeholder perspectives on factors influencing rural physiotherapy service provision and insights into decision making about service provision. Purposive sampling, open-ended survey questions and semi-structured interviews were used in this exploratory, qualitative study. A rural centre and its regional referral centre formed the pilot sites. Nine participant perspectives were obtained on rural physiotherapy services. Stakeholder perspectives on factors influencing rural physiotherapy service provision and service level decision making. Workforce capacity and capability, decision maker's knowledge of the role and scope of physiotherapy, consideration of physiotherapy within resource allocation decisions and proof of practice emerged as key issues. The latter three were particularly reflected in public sector participant comments. Business models and market size were identified factors in influencing private practice. Influencing factors described by participants both align and extend our understanding of issues described in the rural physiotherapy literature. Participant insights add depth and meaning to quantitative data by revealing impacts on local service provision. Available funding and facility priorities were key determinants of public sector physiotherapy service provision, with market size and business model appearing more influential in private practice. The level of self direction or choice about which services to provide, emerged as a point of difference between public and private providers. Decisions by public sector physiotherapists about service provision appear constrained by existing capacity and workload. Further research into service level decision making might provide valuable insights into rural health service delivery. © 2014 National Rural Health Alliance Inc.

Review of the social and environmental factors affecting the behavior and welfare of turkeys (Meleagris gallopavo).

PubMed

Marchewka, J; Watanabe, T T N; Ferrante, V; Estevez, I

2013-06-01

In modern rearing systems, turkey producers often face economic losses due to increased aggression, feather pecking, cannibalism, leg disorders, or injuries among birds, which are also significant welfare issues. The main underlying causes appear to relate to rapid growth, flock size, density, poor environmental complexity, or lighting, which may be deficient in providing the birds with an adequate physical or social environment. To date, there is little information regarding the effect of these factors on turkey welfare. This knowledge is, however, essential to ensure the welfare of turkeys and to improve their quality of life, but may also be beneficial to industry, allowing better bird performance, improved carcass quality, and reduced mortality and condemnations. This paper reviews the available scientific literature related to the behavior of turkeys as influenced by the physical and social environment that may be relevant to advances toward turkey production systems that take welfare into consideration. We addressed the effects that factors such as density, group size, space availability, maturation, lightning, feeding, and transport may have over parameters that may be relevant to ensure welfare of turkeys. Available scientific studies were based in experimental environments and identified individual factors corresponding to particular welfare problems. Most of the studies aimed at finding optimal levels of rearing conditions that allow avoiding or decreasing most severe welfare issues. This paper discusses the importance of these factors for development of production environments that would be better suited from a welfare and economic point of view.

Analysis of SET pulses propagation probabilities in sequential circuits

NASA Astrophysics Data System (ADS)

Cai, Shuo; Yu, Fei; Yang, Yiqun

2018-05-01

As the feature size of CMOS transistors scales down, single event transient (SET) has been an important consideration in designing logic circuits. Many researches have been done in analyzing the impact of SET. However, it is difficult to consider numerous factors. We present a new approach for analyzing the SET pulses propagation probabilities (SPPs). It considers all masking effects and uses SET pulses propagation probabilities matrices (SPPMs) to represent the SPPs in current cycle. Based on the matrix union operations, the SPPs in consecutive cycles can be calculated. Experimental results show that our approach is practicable and efficient.

Exploring how to increase response rates to surveys of older people.

PubMed

Palonen, Mira; Kaunonen, Marja; Åstedt-Kurki, Päivi

2016-05-01

To address the special considerations that need to be taken into account when collecting data from older people in healthcare research. An objective of all research studies is to ensure there is an adequate sample size. The final sample size will be influenced by methods of recruitment and data collection, among other factors. There are some special considerations that need to be addressed when collecting data among older people. Quantitative surveys of people aged 60 or over in 2009-2014 were analysed using statistical methods. A quantitative study of patients aged 75 or over in an emergency department was used as an example. A methodological approach to analysing quantitative studies concerned with older people. The best way to ensure high response rates in surveys involving people aged 60 or over is to collect data in the presence of the researcher; response rates are lowest in posted surveys and settings where the researcher is not present when data are collected. Response rates do not seem to vary according to the database from which information about the study participants is obtained or according to who is responsible for recruitment to the survey. Implications for research/practice To conduct coherent studies with older people, the data collection process should be carefully considered.

Modulators of haemocyanin oxygen affinity in the hypoxia- and sulphide-tolerant Baltic isopod Saduria entomon (L.).

PubMed

Hagerman, L; Vismann, B

2001-11-01

Dialysed haemocyanin from the isopod Saduria entomon had a considerably increased oxygen affinity (lower P50) and Bohr factor (-1.71) compared to native haemocyanin (Bohr factor -1.36) indicating that dialysis removes a small molecule size modulating factor decreasing the affinity of native haemolymph. Dialysed haemocyanin had a slightly lower co-operativity (2.42 +/- 0.3) than native haemocyanin (2.9 +/- 0.2). L-Lactate (10 mmol l(-1)) improved oxygen affinity by 1-1.5 torr while urate had no effect. Mg2+ affected affinity in a pH-dependent manner (Bohr-factor increased to -1.67) while Ca2+ had no effect on the Bohr factor but increased affinity with ca 1 torr. Thiosulphate changed the Bohr factor to -1.75 to -1.82, similar to dialysed blood. Co-operativity was in neither case affected. The haemocyanin characteristics of S. entomon are similar to those of crustaceans from hydrothermal vents. These characteristics are probably general for crustaceans that are more or less permanently exposed to sulphide.

Interspecific variation in growth responses to climate and competition of five eastern tree species.

PubMed

Rollinson, Christine R; Kaye, Margot W; Canham, Charles D

2016-04-01

Climate and competition are often presented from two opposing views of the dominant driver of individual tree growth and species distribution in temperate forests, such as those in the eastern United States. Previous studies have provided abundant evidence indicating that both factors influence tree growth, and we argue that these effects are not independent of one another and rather that interactions between climate, competition, and size best describe tree growth. To illustrate this point, we describe the growth responses of five common eastern tree species to interacting effects of temperature, precipitation, competition, and individual size using maximum likelihood estimation. Models that explicitly include interactions among these four factors explained over half of the variance in annual growth for four out of five species using annual climate. Expanding temperature and precipitation analyses to include seasonal interactions resulted in slightly improved models with a mean R2 of 0.61 (SD 0.10). Growth responses to individual factors as well their interactions varied greatly among species. For example, growth sensitivity to temperature for Quercus rubra increased with maximum annual precipitation, but other species showed no change in sensitivity or slightly reduced annual growth. Our results also indicate that three-way interactions among individual stem size, competition, and temperature may determine which of the five co-occurring species in our study could have the highest growth rate in a given year. Continued consideration and quantification of interactions among climate, competition, and individual-based characteristics are likely to increase understanding of key biological processes such as tree growth. Greater parameterization of interactions between traditionally segregated factors such as climate and competition may also help build a framework to reconcile drivers of individual-based processes such as growth with larger-scale patterns of species distribution.

Testing the performance of dosimetry measurement standards for calibrating area and personnel dosimeters

NASA Astrophysics Data System (ADS)

Walwyn-Salas, G.; Czap, L.; Gomola, I.; Tamayo-García, J. A.

2016-07-01

The cylindrical NE2575 and spherical PTW32002 chamber types were tested in this paper to determine their performance at different source-chamber distances, field sizes and two radiation qualities. To ensure an accurate measurement, there is a need to apply a correction factor to NE2575 measurements at different distances because of differences found between the reference point defined by the manufacturer and the effective point of measurements. This correction factor for NE2575 secondary standard from the Center for Radiation Protection and Hygiene of Cuba was assessed with a 0.3% uncertainty using the results of three methods. Those laboratories that use the NE2575 chambers should take into consideration the performance characteristics tested in this paper to obtain accurate measurements.

Bayesian inference for psychology, part IV: parameter estimation and Bayes factors.

PubMed

Rouder, Jeffrey N; Haaf, Julia M; Vandekerckhove, Joachim

2018-02-01

In the psychological literature, there are two seemingly different approaches to inference: that from estimation of posterior intervals and that from Bayes factors. We provide an overview of each method and show that a salient difference is the choice of models. The two approaches as commonly practiced can be unified with a certain model specification, now popular in the statistics literature, called spike-and-slab priors. A spike-and-slab prior is a mixture of a null model, the spike, with an effect model, the slab. The estimate of the effect size here is a function of the Bayes factor, showing that estimation and model comparison can be unified. The salient difference is that common Bayes factor approaches provide for privileged consideration of theoretically useful parameter values, such as the value corresponding to the null hypothesis, while estimation approaches do not. Both approaches, either privileging the null or not, are useful depending on the goals of the analyst.

Small Gallstone Size and Delayed Cholecystectomy Increase the Risk of Recurrent Pancreatobiliary Complications After Resolved Acute Biliary Pancreatitis.

PubMed

Kim, Sung Bum; Kim, Tae Nyeun; Chung, Hyun Hee; Kim, Kook Hyun

2017-03-01

Acute biliary pancreatitis (ABP) is a severe complication of gallstone disease with considerable mortality, and its recurrence rate is reported as 50-90% for ABP patients who do not undergo cholecystectomy. However, the incidence of and risk factors for recurrent pancreatobiliary complications after the initial improvement of ABP are not well established in the literature. The aims of this study were to determine the risk factors for recurrent pancreatobiliary complications and to compare the outcomes between early (within 2 weeks after onset of pancreatitis) and delayed cholecystectomy in patients with ABP. Patients diagnosed with ABP at Yeungnam University Hospital from January 2004 to July 2016 were retrospectively reviewed. The following risk factors for recurrent pancreatobiliary complications (acute pancreatitis, acute cholecystitis, and acute cholangitis) were analyzed: demographic characteristics, laboratory data, size and number of gallstones, severity of pancreatitis, endoscopic sphincterotomy, and timing of cholecystectomy. Patients were categorized into two groups: patients with recurrent pancreatobiliary complications (Group A) and patients without pancreatobiliary complications (Group B). Of the total 290 patients with ABP (age 66.8 ± 16.0 years, male 47.9%), 56 (19.3%) patients developed recurrent pancreatobiliary complications, of which 35 cases were acute pancreatitis, 11 cases were acute cholecystitis, and 10 cases were acute cholangitis. Endoscopic sphincterotomy and cholecystectomy were performed in 134 (46.2%) patients and 95 (32.8%) patients, respectively. Age, sex, BMI, diabetes, number of stone, severity of pancreatitis, and laboratory data were not significantly correlated with recurrent pancreatobiliary complications. The risk of recurrent pancreatobiliary complications was significantly increased in the delayed cholecystectomy group compared with the early cholecystectomy group (45.5 vs. 5.0%, p < 0.001). Based on the multivariate logistic regression analyses, two factors, size of gallstone less than or equal to 5 mm and delayed cholecystectomy, were found as risk factors associated with recurrent pancreatobiliary complications. The incidence of recurrent pancreatobiliary complications was 19.3% and was significantly increased in patients with size of gallstone less than or equal to 5 mm and in those who underwent delayed cholecystectomy.

Clever birds are lousy: co-variation between avian innovation and the taxonomic richness of their amblyceran lice.

PubMed

Vas, Zoltán; Lefebvre, Louis; Johnson, Kevin P; Reiczigel, Jeno; Rózsa, Lajos

2011-10-01

Lice (Insecta: Phthiraptera) are ectoparasites that reduce host life expectancy and sexual attractiveness. Their taxonomic richness varies considerably among their hosts. Previous studies have already explored some important factors shaping louse diversity. An unexplored potential correlate of louse taxonomic richness is host behavioural flexibility. In this comparative study, we examine the relationship between louse generic richness, innovative capabilities (as a proxy for behavioural flexibility), and brain size while controlling for host species diversity, phylogeny, body size and research effort. Using data for 108 avian families, we found a highly significant positive relationship between host innovative capabilities and the taxonomic richness of amblyceran lice, but a lack of a similar relationship in ischnoceran lice. Host brain size had only a marginal impact on amblyceran diversity and no correlation with ischnoceran diversity. This suggests that the effect in Amblycera is not mediated by metabolic limitations due to the energetic costs of brain size and maintenance, rather directly caused by the ecological differences between hosts with differing cognitive capabilities. We propose four alternative and mutually non-exclusive hypotheses that may explain this phenomenon. Copyright © 2011 Australian Society for Parasitology Inc. Published by Elsevier Ltd. All rights reserved.

A genomics approach to understanding the role of auxin in apple (Malus x domestica) fruit size control.

PubMed

Devoghalaere, Fanny; Doucen, Thomas; Guitton, Baptiste; Keeling, Jeannette; Payne, Wendy; Ling, Toby John; Ross, John James; Hallett, Ian Charles; Gunaseelan, Kularajathevan; Dayatilake, G A; Diak, Robert; Breen, Ken C; Tustin, D Stuart; Costes, Evelyne; Chagné, David; Schaffer, Robert James; David, Karine Myriam

2012-01-13

Auxin is an important phytohormone for fleshy fruit development, having been shown to be involved in the initial signal for fertilisation, fruit size through the control of cell division and cell expansion, and ripening related events. There is considerable knowledge of auxin-related genes, mostly from work in model species. With the apple genome now available, it is possible to carry out genomics studies on auxin-related genes to identify genes that may play roles in specific stages of apple fruit development. High amounts of auxin in the seed compared with the fruit cortex were observed in 'Royal Gala' apples, with amounts increasing through fruit development. Injection of exogenous auxin into developing apples at the start of cell expansion caused an increase in cell size. An expression analysis screen of auxin-related genes involved in auxin reception, homeostasis, and transcriptional regulation showed complex patterns of expression in each class of gene. Two mapping populations were phenotyped for fruit size over multiple seasons, and multiple quantitative trait loci (QTLs) were observed. One QTL mapped to a region containing an Auxin Response Factor (ARF106). This gene is expressed during cell division and cell expansion stages, consistent with a potential role in the control of fruit size. The application of exogenous auxin to apples increased cell expansion, suggesting that endogenous auxin concentrations are at least one of the limiting factors controlling fruit size. The expression analysis of ARF106 linked to a strong QTL for fruit weight suggests that the auxin signal regulating fruit size could partially be modulated through the function of this gene. One class of gene (GH3) removes free auxin by conjugation to amino acids. The lower expression of these GH3 genes during rapid fruit expansion is consistent with the apple maximising auxin concentrations at this point.

A genomics approach to understanding the role of auxin in apple (Malus x domestica) fruit size control

PubMed Central

2012-01-01

Background Auxin is an important phytohormone for fleshy fruit development, having been shown to be involved in the initial signal for fertilisation, fruit size through the control of cell division and cell expansion, and ripening related events. There is considerable knowledge of auxin-related genes, mostly from work in model species. With the apple genome now available, it is possible to carry out genomics studies on auxin-related genes to identify genes that may play roles in specific stages of apple fruit development. Results High amounts of auxin in the seed compared with the fruit cortex were observed in 'Royal Gala' apples, with amounts increasing through fruit development. Injection of exogenous auxin into developing apples at the start of cell expansion caused an increase in cell size. An expression analysis screen of auxin-related genes involved in auxin reception, homeostasis, and transcriptional regulation showed complex patterns of expression in each class of gene. Two mapping populations were phenotyped for fruit size over multiple seasons, and multiple quantitative trait loci (QTLs) were observed. One QTL mapped to a region containing an Auxin Response Factor (ARF106). This gene is expressed during cell division and cell expansion stages, consistent with a potential role in the control of fruit size. Conclusions The application of exogenous auxin to apples increased cell expansion, suggesting that endogenous auxin concentrations are at least one of the limiting factors controlling fruit size. The expression analysis of ARF106 linked to a strong QTL for fruit weight suggests that the auxin signal regulating fruit size could partially be modulated through the function of this gene. One class of gene (GH3) removes free auxin by conjugation to amino acids. The lower expression of these GH3 genes during rapid fruit expansion is consistent with the apple maximising auxin concentrations at this point. PMID:22243694

Intraspecific variation in reproductive traits of burrowing owls

USGS Publications Warehouse

Conway, Meaghan; Nadeau, Christopher P.; Conway, Courtney J.

2012-01-01

Reviews of hatching asynchrony in birds recommended more studies on intraspecific variation in the extent of hatching asynchrony. We examined intraspecific variation in clutch size, laying chronology, onset of incubation, incubation period, and hatching asynchrony in burrowing owls (Athene cunicularia) in the Imperial Valley of California. Mean clutch size was 7.4 eggs and owls averaged 0.5 eggs laid per day. Females varied considerably in laying interval and onset of incubation (range = 1st to 9th egg in the clutch). The mean incubation period was 21.9 days. Hatching interval also varied greatly among females (x = 0.8, range 0.1-2.0 days between successively hatched eggs). Past burrowing owl studies have largely overlooked the substantial intraspecific variation in these traits or have reported estimates that differ from ours. Future studies designed to identify the environmental factors that explain the large intraspecific variation in these traits will likely provide insights into the constraints on local abundance.

Microfabrication of three-dimensional filters for liposome extrusion

NASA Astrophysics Data System (ADS)

Baldacchini, Tommaso; Nuñez, Vicente; LaFratta, Christopher N.; Grech, Joseph S.; Vullev, Valentine I.; Zadoyan, Ruben

2015-03-01

Liposomes play a relevant role in the biomedical field of drug delivery. The ability of these lipid vesicles to encapsulate and transport a variety of bioactive molecules has fostered their use in several therapeutic applications, from cancer treatments to the administration of drugs with antiviral activities. Size and uniformity are key parameters to take into consideration when preparing liposomes; these factors greatly influence their effectiveness in both in vitro and in vivo experiments. A popular technique employed to achieve the optimal liposome dimension (around 100 nm in diameter) and uniform size distribution is repetitive extrusion through a polycarbonate filter. We investigated two femtosecond laser direct writing techniques for the fabrication of three-dimensional filters within a microfluidics chip for liposomes extrusion. The miniaturization of the extrusion process in a microfluidic system is the first step toward a complete solution for lab-on-a-chip preparation of liposomes from vesicles self-assembly to optical characterization.

Centroid measurement error of CMOS detector in the presence of detector noise for inter-satellite optical communications

NASA Astrophysics Data System (ADS)

Li, Xin; Zhou, Shihong; Ma, Jing; Tan, Liying; Shen, Tao

2013-08-01

CMOS is a good candidate tracking detector for satellite optical communications systems with outstanding feature of sub-window for the development of APS (Active Pixel Sensor) technology. For inter-satellite optical communications it is critical to estimate the direction of incident laser beam precisely by measuring the centroid position of incident beam spot. The presence of detector noise results in measurement error, which degrades the tracking performance of systems. In this research, the measurement error of CMOS is derived taking consideration of detector noise. It is shown that the measurement error depends on pixel noise, size of the tracking sub-window (pixels number), intensity of incident laser beam, relative size of beam spot. The influences of these factors are analyzed by numerical simulation. We hope the results obtained in this research will be helpful in the design of CMOS detector satellite optical communications systems.

System reliability analysis of granular filter for protection against piping in dams

NASA Astrophysics Data System (ADS)

Srivastava, A.; Sivakumar Babu, G. L.

2015-09-01

Granular filters are provided for the safety of water retaining structure for protection against piping failure. The phenomenon of piping triggers when the base soil to be protected starts migrating in the direction of seepage flow under the influence of seepage force. To protect base soil from migration, the voids in the filter media should be small enough but it should not also be too small to block smooth passage of seeping water. Fulfilling these two contradictory design requirements at the same time is a major concern for the successful performance of granular filter media. Since Terzaghi era, conventionally, particle size distribution (PSD) of granular filters is designed based on particle size distribution characteristics of the base soil to be protected. The design approach provides a range of D15f value in which the PSD of granular filter media should fall and there exist infinite possibilities. Further, safety against the two critical design requirements cannot be ensured. Although used successfully for many decades, the existing filter design guidelines are purely empirical in nature accompanied with experience and good engineering judgment. In the present study, analytical solutions for obtaining the factor of safety with respect to base soil particle migration and soil permeability consideration as proposed by the authors are first discussed. The solution takes into consideration the basic geotechnical properties of base soil and filter media as well as existing hydraulic conditions and provides a comprehensive solution to the granular filter design with ability to assess the stability in terms of factor of safety. Considering the fact that geotechnical properties are variable in nature, probabilistic analysis is further suggested to evaluate the system reliability of the filter media that may help in risk assessment and risk management for decision making.

Agricultural chemicals in groundwater of the midwestern United States: Relations to land use

USGS Publications Warehouse

Kolpin, D.W.

1997-01-01

To determine the relations between land use and concentrations of selected agricultural chemicals (nitrate, atrazine residue [atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) + deethylatrazinc (2-amino-4-chloro-6-isopropylamino-s-triazine) + deisopropylatrazine (2-amino-4-chloro-6-ethylamino-s-triazine)], and alachlor residue [alachlor, [2-chloro-2′,6′-diethyl-N-(methoxymethyl) acetanilide] + alachlor ethanesulfonic acid (alachlor-ESA; 2-[(2,6-diethylphenyl)(methoxymethyl)amino]-2-oxoethanesulfonic acid)] in groundwater, detailed land use information based on accurate measurements from aerial photographs for the 1991 growing season was obtained within a 2-km radius surrounding 100 wells completed in near-surface unconsolidated aquifers in the midwestern USA. The most significant land use factors to the agricultural chemicals examined were: nitrate (amount of irrigated crop production, positive relation), atrazine residue (amount of irrigated crop production, positive relation), and alachlor residue (amount of highly erodible land, inverse relation). The investigation of smaller buffer sizes (size of circular area around sampled wells) proved insightful for this study. Additional land use factors having significant relations to all three agricultural chemicals were identified using these smaller buffer radii. The most significant correlations (correlation maxima) generally occurred at ≤500-m for nitrate and ≥1000-m for atrazine residue and alachlor residue. An attempt to improve the statistical relations to land use by taking hydrologic considerations into account (removing land outside the estimated most probable recharge area from the statistical analysis) was not as successful as anticipated. Only 45% of the nitrate, 32% of the atrazine residue, and 20% of the alachlor residue correlations were improved by a consideration of the estimated most probable recharge area.

Media milling process optimization for manufacture of drug nanoparticles using design of experiments (DOE).

PubMed

Nekkanti, Vijaykumar; Marwah, Ashwani; Pillai, Raviraj

2015-01-01

Design of experiments (DOE), a component of Quality by Design (QbD), is systematic and simultaneous evaluation of process variables to develop a product with predetermined quality attributes. This article presents a case study to understand the effects of process variables in a bead milling process used for manufacture of drug nanoparticles. Experiments were designed and results were computed according to a 3-factor, 3-level face-centered central composite design (CCD). The factors investigated were motor speed, pump speed and bead volume. Responses analyzed for evaluating these effects and interactions were milling time, particle size and process yield. Process validation batches were executed using the optimum process conditions obtained from software Design-Expert® to evaluate both the repeatability and reproducibility of bead milling technique. Milling time was optimized to <5 h to obtain the desired particle size (d90 < 400 nm). The desirability function used to optimize the response variables and observed responses were in agreement with experimental values. These results demonstrated the reliability of selected model for manufacture of drug nanoparticles with predictable quality attributes. The optimization of bead milling process variables by applying DOE resulted in considerable decrease in milling time to achieve the desired particle size. The study indicates the applicability of DOE approach to optimize critical process parameters in the manufacture of drug nanoparticles.

The evolution of genetic and conditional alternative reproductive tactics

PubMed Central

2016-01-01

Frequency-dependent selection may drive adaptive diversification within species. It is yet unclear why the occurrence of alternative reproductive tactics (ARTs) is highly divergent between major animal taxa. Here we aim to clarify the environmental and social conditions favouring the evolution of intra-population variance of male reproductive phenotypes. Our results suggest that genetically determined ARTs that are fixed for life evolve when there is strong selection on body size due to size-dependent competitiveness, in combination with environmental factors reducing size benefits. The latter may result from growth costs or, more generally, from age-dependent but size-independent mortality causes. This generates disruptive selection on growth trajectories underlying tactic choice. In many parameter settings, the model also predicts ARTs to evolve that are flexible and responsive to current conditions. Interestingly, the conditions favouring the evolution of flexible tactics diverge considerably from those favouring genetic variability. Nevertheless, in a restricted but relevant parameter space, our model predicts the simultaneous emergence and maintenance of a mixture of multiple tactics, both genetically and conditionally determined. Important conditions for the emergence of ARTs include size variation of competitors, which is inherently greater in species with indeterminate growth than in taxa reproducing only after reaching their terminal body size. This is probably the reason why ARTs are more common in fishes than in other major taxa. PMID:26911960

Rain, prey and predators: climatically driven shifts in frog abundance modify reproductive allometry in a tropical snake.

PubMed

Brown, Gregory P; Shine, Richard

2007-11-01

To predict the impacts of climate change on animal populations, we need long-term data sets on the effects of annual climatic variation on the demographic traits (growth, survival, reproductive output) that determine population viability. One frequent complication is that fecundity also depends upon maternal body size, a trait that often spans a wide range within a single population. During an eight-year field study, we measured annual variation in weather conditions, frog abundance and snake reproduction on a floodplain in the Australian wet-dry tropics. Frog numbers varied considerably from year to year, and were highest in years with hotter wetter conditions during the monsoonal season ("wet season"). Mean maternal body sizes, egg sizes and post-partum maternal body conditions of frog-eating snakes (keelback, Tropidonophis mairii, Colubridae) showed no significant annual variation over this period, but mean clutch sizes were higher in years with higher prey abundance. Larger females were more sensitive to frog abundance in this respect than were smaller conspecifics, so that the rate at which fecundity increased with body size varied among years, and was highest when prey availability was greatest. Thus, the link between female body size and reproductive output varied among years, with climatic factors modifying the relative reproductive rates of larger (older) versus smaller (younger) animals within the keelback population.

Effect size and statistical power in the rodent fear conditioning literature - A systematic review.

PubMed

Carneiro, Clarissa F D; Moulin, Thiago C; Macleod, Malcolm R; Amaral, Olavo B

2018-01-01

Proposals to increase research reproducibility frequently call for focusing on effect sizes instead of p values, as well as for increasing the statistical power of experiments. However, it is unclear to what extent these two concepts are indeed taken into account in basic biomedical science. To study this in a real-case scenario, we performed a systematic review of effect sizes and statistical power in studies on learning of rodent fear conditioning, a widely used behavioral task to evaluate memory. Our search criteria yielded 410 experiments comparing control and treated groups in 122 articles. Interventions had a mean effect size of 29.5%, and amnesia caused by memory-impairing interventions was nearly always partial. Mean statistical power to detect the average effect size observed in well-powered experiments with significant differences (37.2%) was 65%, and was lower among studies with non-significant results. Only one article reported a sample size calculation, and our estimated sample size to achieve 80% power considering typical effect sizes and variances (15 animals per group) was reached in only 12.2% of experiments. Actual effect sizes correlated with effect size inferences made by readers on the basis of textual descriptions of results only when findings were non-significant, and neither effect size nor power correlated with study quality indicators, number of citations or impact factor of the publishing journal. In summary, effect sizes and statistical power have a wide distribution in the rodent fear conditioning literature, but do not seem to have a large influence on how results are described or cited. Failure to take these concepts into consideration might limit attempts to improve reproducibility in this field of science.

Effect size and statistical power in the rodent fear conditioning literature – A systematic review

PubMed Central

Macleod, Malcolm R.

2018-01-01

Proposals to increase research reproducibility frequently call for focusing on effect sizes instead of p values, as well as for increasing the statistical power of experiments. However, it is unclear to what extent these two concepts are indeed taken into account in basic biomedical science. To study this in a real-case scenario, we performed a systematic review of effect sizes and statistical power in studies on learning of rodent fear conditioning, a widely used behavioral task to evaluate memory. Our search criteria yielded 410 experiments comparing control and treated groups in 122 articles. Interventions had a mean effect size of 29.5%, and amnesia caused by memory-impairing interventions was nearly always partial. Mean statistical power to detect the average effect size observed in well-powered experiments with significant differences (37.2%) was 65%, and was lower among studies with non-significant results. Only one article reported a sample size calculation, and our estimated sample size to achieve 80% power considering typical effect sizes and variances (15 animals per group) was reached in only 12.2% of experiments. Actual effect sizes correlated with effect size inferences made by readers on the basis of textual descriptions of results only when findings were non-significant, and neither effect size nor power correlated with study quality indicators, number of citations or impact factor of the publishing journal. In summary, effect sizes and statistical power have a wide distribution in the rodent fear conditioning literature, but do not seem to have a large influence on how results are described or cited. Failure to take these concepts into consideration might limit attempts to improve reproducibility in this field of science. PMID:29698451

76 FR 24024 - Request for Information Relating to Studies Regarding the Resolution of Financial Companies Under...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... such adverse impacts without creating such moral hazard; (D) The key factors and considerations that... financial companies; (A) The key factors and considerations that should be taken into account in assessing... of systemic financial companies; (B) The key factors and considerations that should be taken into...

46 CFR 160.054-2 - Type and size.

Code of Federal Regulations, 2011 CFR

2011-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Inflatable Liferafts § 160.054-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight type... special consideration. (b) Size. First-aid kits shall be of a size adequate for packing 12 standard single...

46 CFR 160.054-2 - Type and size.

Code of Federal Regulations, 2014 CFR

2014-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Inflatable Liferafts § 160.054-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight type... special consideration. (b) Size. First-aid kits shall be of a size adequate for packing 12 standard single...

46 CFR 160.054-2 - Type and size.

Code of Federal Regulations, 2013 CFR

2013-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Inflatable Liferafts § 160.054-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight type... special consideration. (b) Size. First-aid kits shall be of a size adequate for packing 12 standard single...

46 CFR 160.054-2 - Type and size.

Code of Federal Regulations, 2012 CFR

2012-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Inflatable Liferafts § 160.054-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight type... special consideration. (b) Size. First-aid kits shall be of a size adequate for packing 12 standard single...

46 CFR 160.054-2 - Type and size.

Code of Federal Regulations, 2010 CFR

2010-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Inflatable Liferafts § 160.054-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight type... special consideration. (b) Size. First-aid kits shall be of a size adequate for packing 12 standard single...

Shear wave elastography in the diagnosis of breast non-mass lesions: factors associated with false negative and false positive results.

PubMed

Park, So Yoon; Choi, Ji Soo; Han, Boo-Kyung; Ko, Eun Young; Ko, Eun Sook

2017-09-01

To investigate factors related to false shear wave elastography (SWE) results for breast non-mass lesions (NMLs) detected by B-mode US. This retrospective study enrolled 152 NMLs detected by B-mode US and later pathologically confirmed (79 malignant, 73 benign). All lesions underwent B-mode US and SWE. Quantitative (mean elasticity [E mean ]) and qualitative (maximum stiffness colour) SWE parameters were assessed, and 'E mean  > 85.1 kPa' or 'stiff colour (green to red)' determined malignancy. Final SWE results were matched to pathology results. Multivariate logistic regression analysis identified factors associated with false SWE results for diagnosis of breast NMLs. Associated calcifications (E mean : odds ratio [OR] = 7.60, P < 0.01; maximum stiffness colour: OR = 6.30, P = 0.02), in situ cancer compared to invasive cancer (maximum stiffness colour: OR = 5.29, P = 0.02), and lesion size (E mean : OR = 0.90, P < 0.01; maximum stiffness colour: OR = 0.91, P = 0.01) were significantly associated with false negative SWE results for malignant NMLs. Distance from the nipple (E mean : OR = 0.84, P = 0.03; maximum stiffness colour: OR = 0.93, P = 0.04) was significantly associated with false positive SWE results for benign NMLs. Presence of associated calcifications, absence of the invasive component, and smaller lesion size for malignant NMLs and shorter distance from the nipple for benign NMLs are factors significantly associated with false SWE results. • Calcification and size are associated with false negative SWE in malignant NMLs. • In situ cancer is associated with false negative SWE in malignant NMLs. • Distance from the nipple is associated with false positive SWE in benign NMLs. • These factors need consideration when performing SWE on breast NMLs.

Prognostic factors of primary gastrointestinal stromal tumors: a cohort study based on high-volume centers.

PubMed

Liu, Xuechao; Qiu, Haibo; Zhang, Peng; Feng, Xingyu; Chen, Tao; Li, Yong; Tao, Kaixiong; Li, Guoxin; Sun, Xiaowei; Zhou, Zhiwei

2018-02-01

We aimed to evaluate the clinicopathologic characteristics, immunohistochemical expression and prognostic factors of patients with primary gastrointestinal stromal tumors (GISTs). Data from 2,570 consecutive GIST patients from four medical centers in China (January 2001-December 2015) were reviewed. Survival curves were constructed by the Kaplan-Meier method, and Cox regression models were used to identify independent prognostic factors. Of the included patients, 1,375 (53.5%) were male, and the patient age range was 18 to 95 (median, 58) years. The tumors were mostly found in the stomach (64.5%), small intestine (25.1%) and colorectal region (5.1%). At the time of diagnosis, the median tumor size was 4.0 (range: 0.1-55.0) cm, and the median mitotic index per 50 high power fields (HPFs) was 3 (range: 0-254). Of the 2,168 resected patients, 2,009 (92.7%) received curative resection. According to the modified National Institutes of Health (NIH) classification, 21.9%, 28.9%, 14.1% and 35.1% were very low-, low-, intermediate- and high-risk tumors, respectively. The rate of positivity was 96.4% for c-Kit, 87.1% for CD34, 96.9% for delay of germination 1 (DOG-1), 8.0% for S-100, 31.0% for smooth muscle actin (SMA) and 5.1% for desmin. However, the prognostic value of each was limited. Multivariate analysis showed that age, tumor size, mitotic index, tumor site, occurrence of curative resection and postoperative imatinib were independent prognostic factors. Furthermore, we found that high-risk patients benefited significantly from postoperative imatinib (P<0.001), whereas intermediate-risk patients did not (P=0.954). Age, tumor size, mitotic index, tumor site, occurrence of curative resection and postoperative imatinib were independent prognostic factors in patients with GISTs. Moreover, determining whether intermediate-risk patients can benefit from adjuvant imatinib would be of considerable interest in future studies.

International Space Station USOS Crew Quarters Development

NASA Technical Reports Server (NTRS)

Broyan, James Lee, Jr.; Borrego, Melissa Ann; Bahr, Juergen F.

2008-01-01

The International Space Station (ISS) United States Operational Segment (USOS) currently provides a Temporary Sleep Station (TeSS) as crew quarters for one crewmember in the Laboratory Module. The Russian Segment provides permanent crew quarters (Kayutas) for two crewmembers in the Service Module. The TeSS provides limited electrical, communication, and ventilation functionality. A new permanent rack sized USOS ISS Crew Quarters (CQ) is being developed. Up to four CQs can be installed into the Node 2 element to increase the ISS crewmember size to six. The new CQs will provide private crewmember space with enhanced acoustic noise mitigation, integrated radiation reduction material, controllable airflow, communication equipment, redundant electrical systems, and redundant caution and warning systems. The rack sized CQ is a system with multiple crewmember restraints, adjustable lighting, controllable ventilation, and interfaces that allow each crewmember to personalize their CQ workspace. Providing an acoustically quiet and visually isolated environment, while ensuring crewmember safety, is critical for obtaining crewmember rest and comfort to enable long term crewmember performance. The numerous human factor, engineering, and program considerations during the concept, design, and prototyping are outlined in the paper.

Factors Associated with the Performance and Cost-Effectiveness of Using Lymphatic Filariasis Transmission Assessment Surveys for Monitoring Soil-Transmitted Helminths: A Case Study in Kenya

PubMed Central

Smith, Jennifer L.; Sturrock, Hugh J. W.; Assefa, Liya; Nikolay, Birgit; Njenga, Sammy M.; Kihara, Jimmy; Mwandawiro, Charles S.; Brooker, Simon J.

2015-01-01

Transmission assessment surveys (TAS) for lymphatic filariasis have been proposed as a platform to assess the impact of mass drug administration (MDA) on soil-transmitted helminths (STHs). This study used computer simulation and field data from pre- and post-MDA settings across Kenya to evaluate the performance and cost-effectiveness of the TAS design for STH assessment compared with alternative survey designs. Variations in the TAS design and different sample sizes and diagnostic methods were also evaluated. The district-level TAS design correctly classified more districts compared with standard STH designs in pre-MDA settings. Aggregating districts into larger evaluation units in a TAS design decreased performance, whereas age group sampled and sample size had minimal impact. The low diagnostic sensitivity of Kato-Katz and mini-FLOTAC methods was found to increase misclassification. We recommend using a district-level TAS among children 8–10 years of age to assess STH but suggest that key consideration is given to evaluation unit size. PMID:25487730

Potential for bed-material entrainment in selected streams of the Edwards Plateau - Edwards, Kimble, and Real Counties, Texas, and vicinity

USGS Publications Warehouse

Heitmuller, Franklin T.; Asquith, William H.

2008-01-01

The Texas Department of Transportation spends considerable money for maintenance and replacement of low-water crossings of streams in the Edwards Plateau in Central Texas as a result of damages caused in part by the transport of cobble- and gravel-sized bed material. An investigation of the problem at low-water crossings was made by the U.S. Geological Survey in cooperation with the Texas Department of Transportation, and in collaboration with Texas Tech University, Lamar University, and the University of Houston. The bed-material entrainment problem for low-water crossings occurs at two spatial scales - watershed scale and channel-reach scale. First, the relative abundance and activity of cobble- and gravel-sized bed material along a given channel reach becomes greater with increasingly steeper watershed slopes. Second, the stresses required to mobilize bed material at a location can be attributed to reach-scale hydraulic factors, including channel geometry and particle size. The frequency of entrainment generally increases with downstream distance, as a result of decreasing particle size and increased flood magnitudes. An average of 1 year occurs between flows that initially entrain bed material as large as the median particle size, and an average of 1.5 years occurs between flows that completely entrain bed material as large as the median particle size. The Froude numbers associated with initial and complete entrainment of bed material up to the median particle size approximately are 0.40 and 0.45, respectively.

Perception while watching movies: Effects of physical screen size and scene type.

PubMed

Troscianko, Tom; Meese, Timothy S; Hinde, Stephen

2012-01-01

Over the last decade, television screens and display monitors have increased in size considerably, but has this improved our televisual experience? Our working hypothesis was that the audiences adopt a general strategy that "bigger is better." However, as our visual perceptions do not tap directly into basic retinal image properties such as retinal image size (C. A. Burbeck, 1987), we wondered whether object size itself might be an important factor. To test this, we needed a task that would tap into the subjective experiences of participants watching a movie on different-sized displays with the same retinal subtense. Our participants used a line bisection task to self-report their level of "presence" (i.e., their involvement with the movie) at several target locations that were probed in a 45-min section of the movie "The Good, The Bad, and The Ugly." Measures of pupil dilation and reaction time to the probes were also obtained. In Experiment 1, we found that subjective ratings of presence increased with physical screen size, supporting our hypothesis. Face scenes also produced higher presence scores than landscape scenes for both screen sizes. In Experiment 2, reaction time and pupil dilation results showed the same trends as the presence ratings and pupil dilation correlated with presence ratings, providing some validation of the method. Overall, the results suggest that real-time measures of subjective presence might be a valuable tool for measuring audience experience for different types of (i) display and (ii) audiovisual material.

Practical implications of theoretical consideration of capsule filling by the dosator nozzle system.

PubMed

Jolliffe, I G; Newton, J M

1982-05-01

Eight lactose size fractions with mean particle sizes ranging from 15.6 to 155.2 micrometers were characterized by their failure properties using a Jenike shear cell. The effective angle of internal friction was found to be constant for all size fractions, with a mean value of 36.2 degrees. Jenike flow factors could only be obtained for the two most cohesive size fractions presumably due to limitations of the shear cell. Angles of wall friction, phi, were determined for all size fractions on face ground and turned stainless steel surfaces. These decreased with increasing particle size up to around 40 micrometers, above which they became effectively constant for both surfaces. The rougher turned plate gave consistently higher values of phi for each particle size. Simple retention experiments with a dosator nozzle and a range of powder bed bulk densities showed good retention was possible only up to a particle size of around 40 micrometers. Retention was difficult or impossible above this size. Values of phi were applied to equations derived in the theoretical approach described previously (Jolliffe et al 1980). This showed that the strength required within a powder to ensure arching increases with increasing particle size up to around 40 micrometers. Above this size, this strength requirement becomes constant. This is related to the powder retention observations. Finally, the failure data was used to calculate the minimum compressive stresses required to ensure powder retention within the dosator nozzle, by employing the equations described by Jolliffe et al (1980). This suggested that, as powders became more free flowing, a larger compressive stress is necessary and that the angle of wall friction should be lower to ensure stress is transmitted to the arching zone.

Land Use, Macroalgae, and a Tumor-Forming Disease in Marine Turtles

PubMed Central

Van Houtan, Kyle S.; Hargrove, Stacy K.; Balazs, George H.

2010-01-01

Wildlife diseases are an increasing concern for endangered species conservation, but their occurrence, causes, and human influences are often unknown. We analyzed 3,939 records of stranded Hawaiian green sea turtles (Chelonia mydas) over 28 years to understand fibropapillomatosis, a tumor-forming disease linked to a herpesvirus. Turtle size is a consistent risk factor and size-standardized models revealed considerable spatial and temporal variability. The disease peaked in some areas in the 1990s, in some regions rates remained constant, and elsewhere rates increased. Land use, onshore of where the turtles feed, may play a role. Elevated disease rates were clustered in watersheds with high nitrogen-footprints; an index of natural and anthropogenic factors that affect coastal eutrophication. Further analysis shows strong epidemiological links between disease rates, nitrogen-footprints, and invasive macroalgae and points to foraging ecology. These turtles now forage on invasive macroalgae, which can dominate nutrient rich waters and sequester environmental N in the amino acid arginine. Arginine is known to regulate immune activity, promote herpesviruses, and contribute to tumor formation. Our results have implications for understanding diseases in aquatic organisms, eutrophication, herpesviruses, and tumor formation. PMID:20927370

Evaluation of simplified stream-aquifer depletion models for water rights administration

USGS Publications Warehouse

Sophocleous, Marios; Koussis, Antonis; Martin, J.L.; Perkins, S.P.

1995-01-01

We assess the predictive accuracy of Glover's (1974) stream-aquifer analytical solutions, which are commonly used in administering water rights, and evaluate the impact of the assumed idealizations on administrative and management decisions. To achieve these objectives, we evaluate the predictive capabilities of the Glover stream-aquifer depletion model against the MODFLOW numerical standard, which, unlike the analytical model, can handle increasing hydrogeologic complexity. We rank-order and quantify the relative importance of the various assumptions on which the analytical model is based, the three most important being: (1) streambed clogging as quantified by streambed-aquifer hydraulic conductivity contrast; (2) degree of stream partial penetration; and (3) aquifer heterogeneity. These three factors relate directly to the multidimensional nature of the aquifer flow conditions. From these considerations, future efforts to reduce the uncertainty in stream depletion-related administrative decisions should primarily address these three factors in characterizing the stream-aquifer process. We also investigate the impact of progressively coarser model grid size on numerically estimating stream leakage and conclude that grid size effects are relatively minor. Therefore, when modeling is required, coarser model grids could be used thus minimizing the input data requirements.

Conversion of transuranic waste to low level waste by decontamination: a site specific update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, R.P.; Hazelton, R.F.

1985-09-01

As a followup to an FY-1984 cost/benefit study, a program was conducted in FY-1985 to transfer to the relevant DOE sites the information and technology for the direct conversion of transuranic (TRU) waste to low-level waste (LLW) by decontamination. As part of this work, the economic evaluation of the various TRUW volume reduction and conversion options was updated and expanded to include site-specific factors. The results show, for the assumptions used, that size reduction, size reduction followed by decontamination, or in situ decontamination are cost effective compared with the no-processing option. The technology transfer activities included site presentations and discussionsmore » with operations and waste management personnel to identify application opportunities and site-specific considerations and constraints that could affect the implementation of TRU waste conversion principles. These discussions disclosed definite potential for the beneficial application of these principles at most of the sites, but also confirmed the existence of site-specific factors ranging from space limitations to LLW disposal restrictions that could preclude particular applications or diminish expected benefits. 8 refs., 2 figs., 4 tabs.« less

Anaerobic wastewater treatment and membrane filtration: a one night stand or a sustainable relationship?

PubMed

Jeison, D; van Lier, J B

2008-01-01

Several anaerobic membrane bioreactors (AnMBR) were operated, under various conditions, applying different reactor configurations. Applicable fluxes were strongly determined by the physical properties of the sludge present in the reactors. Results show that particle size is a key determining factor for the attainable fluxes. Under thermophilic conditions, small sludge particle size was observed, resulting in low critical fluxes reaching 6-7 L/m2h for the submerged configuration and acidified substrate. In contrast, under mesophilic conditions critical fluxes of 20 L/m2h were obtained. The acidification level also showed a strong effect. Under thermophilic conditions, the presence of a significant fraction of non-acidified organic matter induced the growth of suspended acidogenic biomass that seriously affected the applicable fluxes, both in submerged and side-stream configurations. Under all conditions tested cake formation showed to be the limiting factor determining the applicable fluxes. Only low levels of irreversible fouling were observed. Due to technical and economical considerations, most interesting perspectives for the application of AnMBR are expected with the treatment of high-strength particulate wastewaters, and with extreme wastewaters characterised by high temperature, salinity, etc.

Liquid rocket actuators and operators. [in spacecraft control systems

NASA Technical Reports Server (NTRS)

1973-01-01

All the types of actuators and associated operators used in booster, upper stage, and spacecraft propulsion and reaction-control systems except for chemical-explosive actuators and turbine actuators are discussed. Discussion of static and dynamic seals, mechanical transmission of motion, and instrumentation is included to the extent that actuator or operator design is affected. Selection of the optimum actuator configuration is discussed for specific application which require a tradeoff study that considers all the relevant factors: available energy sources, load capacity, stroke, speed of response, leakage limitations, environmental conditions, chemical compatibility, storage life and conditions, size, weight, and cost. These factors are interrelated with overall control-system design evaluations that are beyond the scope of this monograph; however, literature references are cited for a detailed review of the general considerations. Perinent advanced-state-of-the-art design concepts are surveyed briefly.

Classification of full-thickness rotator cuff lesions: a review

PubMed Central

Lädermann, Alexandre; Burkhart, Stephen S.; Hoffmeyer, Pierre; Neyton, Lionel; Collin, Philippe; Yates, Evan; Denard, Patrick J.

2016-01-01

Rotator cuff lesions (RCL) have considerable variability in location, tear pattern, functional impairment, and repairability. Historical classifications for differentiating these lesions have been based upon factors such as the size and shape of the tear, and the degree of atrophy and fatty infiltration. Additional recent descriptions include bipolar rotator cuff insufficiency, ‘Fosbury flop tears’, and musculotendinous lesions. Recommended treatment is based on the location of the lesion, patient factors and associated pathology, and often includes personal experience and data from case series. Development of a more comprehensive classification which integrates historical and newer descriptions of RCLs may help to guide treatment further. Cite this article: Lädermann A, Burkhart SS, Hoffmeyer P, et al. Classification of full thickness rotator cuff lesions: a review. EFORT Open Rev 2016;1:420-430. DOI: 10.1302/2058-5241.1.160005. PMID:28461921

Factors determining antibody distribution in tumors.

PubMed

Thurber, Greg M; Schmidt, Michael M; Wittrup, K Dane

2008-02-01

The development of antibody therapies for cancer is increasing rapidly, primarily owing to their specificity. Antibody distribution in tumors is often extremely uneven, however, leading to some malignant cells being exposed to saturating concentrations of antibody, whereas others are completely untargeted. This is detrimental because large regions of cells escape therapy, whereas other regions might be exposed to suboptimal concentrations that promote a selection of resistant mutants. The distribution of antibody depends on a variety of factors, including dose, affinity, antigens per cell and molecular size. Because these parameters are often known or easily estimated, a quick calculation based on simple modeling considerations can predict the uniformity of targeting within a tumor. Such analyses should enable experimental researchers to identify in a straightforward way the limitations in achieving evenly distributed antibody, and design and test improved antibody therapeutics more rationally.

Factors determining antibody distribution in tumors

PubMed Central

Thurber, Greg M.; Schmidt, Michael M.; Wittrup, K. Dane

2009-01-01

The development of antibody therapies for cancer is increasing rapidly, primarily owing to their specificity. Antibody distribution in tumors is often extremely uneven, however, leading to some malignant cells being exposed to saturating concentrations of antibody, whereas others are completely untargeted. This is detrimental because large regions of cells escape therapy, whereas other regions might be exposed to suboptimal concentrations that promote a selection of resistant mutants. The distribution of antibody depends on a variety of factors, including dose, affinity, antigens per cell and molecular size. Because these parameters are often known or easily estimated, a quick calculation based on simple modeling considerations can predict the uniformity of targeting within a tumor. Such analyses should enable experimental researchers to identify in a straightforward way the limitations in achieving evenly distributed antibody, and design and test improved antibody therapeutics more rationally. PMID:18179828

Determination of an Optimal Commercial Data Bus Architecture for a Flight Data System

NASA Technical Reports Server (NTRS)

Crawford, Kevin; Johnson, Martin; Humphries, Rick (Technical Monitor)

2001-01-01

NASA/Marshall Space Flight Center (MSFC) is continually looking for methods to reduce cost and schedule while keeping the quality of work high. MSFC is NASA's lead center for space transportation and microgravity research. When supporting NASA's programs several decisions concerning the avionics system must be made. Usually many trade studies must be conducted to determine the best ways to meet the customer's requirements. When deciding the flight data system, one of the first trade studies normally conducted is the determination of the data bus architecture. The schedule, cost, reliability, and environments are some of the factors that are reviewed in the determination of the data bus architecture. Based on the studies, the data bus architecture could result in a proprietary data bus or a commercial data bus. The cost factor usually removes the proprietary data bus from consideration. The commercial data bus's range from Versa Module Eurocard (VME) to Compact PCI to STD 32 to PC 104. If cost, schedule and size are prime factors, VME is usually not considered. If the prime factors are cost, schedule, and size then Compact PCI, STD 32 and PC104 are the choices for the data bus architecture. MSFC's center director has funded a study from his discretionary fund to determine an optimal low cost commercial data bus architecture. The goal of the study is to functionally and environmentally test Compact PCI, STD 32 and PC 104 data bus architectures. This paper will summarize the results of the data bus architecture study.

[The distribution of cardiovascular risk factors in employees from small- and medium-sized enterprises in Germany].

PubMed

Kaifie, Andrea; Kraus, Thomas

2018-02-01

The German Prevention Act, the main parts of which came into force on 25 July 2015, encourages health promotion and prevention programs for people in their living environment. Through this act, preventive measures could reach employees at work that hardly seek medical services. This is of importance since employees with a low occupational position often show risk factors that increase morbidity and mortality. In this study, clinical data from n = 2280 employees from small and medium sized enterprises (SME) were analyzed for economic sector, sex, socioeconomic position (SEP), economic sector cardiovascular risk factors, musculoskeletal and psychological diseases. The socioeconomic position was categorized using the European Socioeconomic Classification into an intermediate/high and a low SEP category. Male employees showed a significantly higher occurrence of risk factors, such as smoking, diabetes or hypertension in comparison to female employees. In the manufacturing industry, male employees with a low SEP showed a higher prevalence of diabetes (2.3 vs. 5.9%), smoking (27.4 vs. 46.5%), and physical inactivity (sports: 55.0 vs. 37.1%) in comparison to employees with an intermediate/high SEP. Male employees with a low SEP from health and social services reported psychiatric disorders more frequently in comparison to those with an intermediate/high SEP (0.7 vs. 5.9%). Male employees with a low SEP should be given special consideration in the implementation of preventive measures at work within the framework of the Prevention Act.

Predictive Factors of Mortality in Burn Patients

PubMed Central

Fazeli, Shahram; Karami-Matin, Reza; Kakaei, Neda; Pourghorban, Samira; Safari-Faramani, Roya; Safari-Faramani, Bahare

2014-01-01

Background: Burn injuries impose a considerable burden on healthcare systems in Iran. It is among the top ten causes of mortality and a main cause of disability. Objectives: This study aimed to examine factors influencing mortality in burn patients admitted to the main educational tertiary referral hospital in Kermanshah. Patients and Methods: All patients admitted to the Imam Khomeini Hospital (from March 2011 to March 2012), due to thermal burn injuries were included in the study. We applied multiple logistic regressions to identify risk and protective factors of mortality. Also we calculated lethal area fifty percent (LA50), as an aggregate index for hospital quality. Results: During the study period, 540 burn patients were admitted. Male to female ratio was 1.12:1. Twenty three percent of the patients were less than 15 years-old. Median of age was 25 years (Inter Quartile Range, 16 - 37). Overall, probability of death was 25.8%. Lethal area fifty percent (LA50) was 50.82 (CI 95%: 47.76 - 54.48). In the final model, after adjustment of sex, age, total body surface area (TBSA), cause of burn and it’s severity, female gender (P < 0.05), age ≥ 60 years (in comparison with age less than 15 years, P < 0.05) and larger burn size (P < 0.0001) were identified as the main risk factors of death in these patients. Conclusions: Findings showed that the main risk factors of death were female gender, burn size and old age. Directing more attention to these vulnerable patients is required to reduce mortality and improve patient survival. PMID:24719826

Grain Refinement of Magnesium Alloys: A Review of Recent Research, Theoretical Developments, and Their Application

NASA Astrophysics Data System (ADS)

StJohn, D. H.; Easton, M. A.; Qian, M.; Taylor, J. A.

2013-07-01

This paper builds on the "Grain Refinement of Mg Alloys" published in 2005 and reviews the grain refinement research on Mg alloys that has been undertaken since then with an emphasis on the theoretical and analytical methods that have been developed. Consideration of recent research results and current theoretical knowledge has highlighted two important factors that affect an alloy's as-cast grain size. The first factor applies to commercial Mg-Al alloys where it is concluded that impurity and minor elements such as Fe and Mn have a substantially negative impact on grain size because, in combination with Al, intermetallic phases can be formed that tend to poison the more potent native or deliberately added nucleant particles present in the melt. This factor appears to explain the contradictory experimental outcomes reported in the literature and suggests that the search for a more potent and reliable grain refining technology may need to take a different approach. The second factor applies to all alloys and is related to the role of constitutional supercooling which, on the one hand, promotes grain nucleation and, on the other hand, forms a nucleation-free zone preventing further nucleation within this zone, consequently limiting the grain refinement achievable, particularly in low solute-containing alloys. Strategies to reduce the negative impact of these two factors are discussed. Further, the Interdependence model has been shown to apply to a broad range of casting methods from slow cooling gravity die casting to fast cooling high pressure die casting and dynamic methods such as ultrasonic treatment.

ARRAY OPTIMIZATION FOR TIDAL ENERGY EXTRACTION IN A TIDAL CHANNEL – A NUMERICAL MODELING ANALYSIS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Zhaoqing; Wang, Taiping; Copping, Andrea

This paper presents an application of a hydrodynamic model to simulate tidal energy extraction in a tidal dominated estuary in the Pacific Northwest coast. A series of numerical experiments were carried out to simulate tidal energy extraction with different turbine array configurations, including location, spacing and array size. Preliminary model results suggest that array optimization for tidal energy extraction in a real-world site is a very complex process that requires consideration of multiple factors. Numerical models can be used effectively to assist turbine siting and array arrangement in a tidal turbine farm for tidal energy extraction.

The Effect of Different Non-Metallic Inclusions on the Machinability of Steels.

PubMed

Ånmark, Niclas; Karasev, Andrey; Jönsson, Pär Göran

2015-02-16

Considerable research has been conducted over recent decades on the role of non‑metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number and morphology of inclusions on machinability factors (such as cutting tool wear, power consumption, etc .) are discussed and summarized. Finally, some methods for modification of non-metallic inclusions in the liquid steel are considered to obtain a desired balance between mechanical properties and machinability of various steel grades.

Rehabilitation strategies for partially edentulous-prosthodontic principles and current trends.

PubMed

D'Souza, Dsj; Dua, Parag

2011-07-01

The prosthetic considerations for treatment of partially edentulous patients involve evaluation of important aspects such as presence of certain functional or skeletal deficits, orientation of the occlusal plane, free-way space, size and location of edentulous areas, number, strategic location and quality of the likely abutment teeth, vertical dimension, and the type of occlusion. A comprehensive evaluation, multidisciplinary approach and a sequential treatment plan, worked out in harmony with the patient's perceptions are important factors to ensure a successful outcome. This article discusses the principles, current trends and importance of clinical decisions in designing a treatment strategy when confronted with complex situations of partial edentulism.

Considerable fluorescence enhancement upon supramolecular complex formation between berberine and p-sulfonated calixarenes

NASA Astrophysics Data System (ADS)

Megyesi, Mónika; Biczók, László

2006-06-01

Remarkably strong binding of berberine to 4-sulfonatocalix[8]arene was found in aqueous solution, which led to fluorescence quantum yield increase of a factor about 40 at pH 2. The hypsochromic shift of the fluorescence maximum implied that berberine sensed less polar microenvironment when confined to SCX8. The stability of the supramolecular complex significantly diminished when sulfocalixarenes of smaller ring size served as host compounds but the pH affected the association strength to a much lesser extent. All berberine complexes proved to be barely fluorescent at pH 12.2 because of excited state quenching by the hosts via electron transfer.

Are Small Schools Better? School Size Considerations for Safety & Learning. Policy Brief.

ERIC Educational Resources Information Center

McRobbie, Joan

New studies from the 1990s have strengthened an already notable consensus on school size: smaller is better. This policy brief outlines research findings on why size makes a difference, how small is small enough, effective approaches to downsizing, and key barriers. No agreement exists at present on optimal school size, but research suggests a…

46 CFR 160.041-2 - Type and size.

Code of Federal Regulations, 2011 CFR

2011-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Merchant Vessels § 160.041-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight cabinet carrying... consideration. (b) Size. First-aid kits shall be of a size (approximately 9″×9″×21/2″ inside) adequate for...

46 CFR 160.041-2 - Type and size.

Code of Federal Regulations, 2012 CFR

2012-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Merchant Vessels § 160.041-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight cabinet carrying... consideration. (b) Size. First-aid kits shall be of a size (approximately 9″×9″×21/2″ inside) adequate for...

46 CFR 160.041-2 - Type and size.

Code of Federal Regulations, 2013 CFR

2013-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Merchant Vessels § 160.041-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight cabinet carrying... consideration. (b) Size. First-aid kits shall be of a size (approximately 9″ × 9″ × 21/2″ inside) adequate for...

46 CFR 160.041-2 - Type and size.

Code of Federal Regulations, 2014 CFR

2014-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Merchant Vessels § 160.041-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight cabinet carrying... consideration. (b) Size. First-aid kits shall be of a size (approximately 9″ × 9″ × 21/2″ inside) adequate for...

46 CFR 160.041-2 - Type and size.

Code of Federal Regulations, 2010 CFR

2010-10-01

...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Kits, First-Aid, for Merchant Vessels § 160.041-2 Type and size. (a) Type. First-aid kits covered by this specification shall be of the water-tight cabinet carrying... consideration. (b) Size. First-aid kits shall be of a size (approximately 9″×9″×21/2″ inside) adequate for...

Productivity, or quality of work as the decisive factor in marketing ergonomics? Design considerations for a new ergonomic welding-table.

PubMed

van der Veen, F; Regensburg, R E

1990-04-01

Quality tools should be designed from the starting point of adjusting tasks and equipment to human possibilities and limitations. Companies should consider an investment in ergonomic equipment as a profitable addition to indispensable productive machinery. As an example to support this statement, the authors describe the health risks of welders and the possible solutions. As the result of investigations a list of requirements was drafted for a product that would have less of the disadvantages of the products mentioned. The designed product, the 'ergonomic welding-table', aims to be a quality tool for welders working at small and medium-sized tasks. The product consists of a cabin (2.35 m wide) with a built-in ventilator for very efficient welding-fume extraction (90%-95%). Welders can set their preferred working height at any time. Another advantage is the option of performing the welding task while standing or sitting. The results of user-evaluation among welders and purchasers indicates considerable satisfaction.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Husain, Tausif; Hasan, Iftekhar; Sozer, Yilmaz

This paper presents the design considerations of a double-sided transverse flux machine (TFM) for direct-drive wind turbine applications. The TFM has a modular structure with quasi-U stator cores and ring windings. The rotor is constructed with ferrite magnets in a flux-concentrating arrangement to achieve high air gap flux density. The design considerations for this TFM with respect to initial sizing, pole number selection, key design ratios, and pole shaping are presented in this paper. Pole number selection is critical in the design process of a TFM because it affects both the torque density and power factor under fixed magnetic andmore » changing electrical loading. Several key design ratios are introduced to facilitate the design procedure. The effect of pole shaping on back-emf and inductance is also analyzed. These investigations provide guidance toward the required design of a TFM for direct-drive applications. The analyses are carried out using analytical and three-dimensional finite element analysis. A prototype is under construction for experimental verification.« less

Physiology driven adaptivity for the numerical solution of the bidomain equations.

PubMed

Whiteley, Jonathan P

2007-09-01

Previous work [Whiteley, J. P. IEEE Trans. Biomed. Eng. 53:2139-2147, 2006] derived a stable, semi-implicit numerical scheme for solving the bidomain equations. This scheme allows the timestep used when solving the bidomain equations numerically to be chosen by accuracy considerations rather than stability considerations. In this study we modify this scheme to allow an adaptive numerical solution in both time and space. The spatial mesh size is determined by the gradient of the transmembrane and extracellular potentials while the timestep is determined by the values of: (i) the fast sodium current; and (ii) the calcium release from junctional sarcoplasmic reticulum to myoplasm current. For two-dimensional simulations presented here, combining the numerical algorithm in the paper cited above with the adaptive algorithm presented here leads to an increase in computational efficiency by a factor of around 250 over previous work, together with significantly less computational memory being required. The speedup for three-dimensional simulations is likely to be more impressive.

Scalp reconstruction: an algorithmic approach and systematic review.

PubMed

Desai, Shaun C; Sand, Jordan P; Sharon, Jeffrey D; Branham, Gregory; Nussenbaum, Brian

2015-01-01

Reconstruction of the scalp after acquired defects remains a common challenge for the reconstructive surgeon, especially in a patient with a history of radiation to the area. To review the current literature and describe a novel algorithm to help guide the reconstructive surgeon in determining the optimal reconstruction from a cosmetic and functional standpoint. Pertinent surgical anatomy, considerations for patient and technique selection, reconstructive goals, as well as the reconstructive ladder, are also discussed. A PubMed and Medline search was performed of the entire English literature with respect to scalp reconstruction. Priority of review was given to those studies with higher-quality levels of evidence. Size, location, radiation history, and potential for hairline distortion are important factors in determining the ideal reconstruction. The tighter and looser areas of the scalp play a major role in the potential for primary or local flap closure. Patients with medium to large defects and a history of radiation will likely benefit from free tissue transfer. Ideal reconstruction of scalp defects relies on a comprehensive understanding of scalp anatomy, a full consideration of the armamentarium of surgical techniques, and a detailed appraisal of patient factors and expectations. The simplest reconstruction should be used whenever possible to provide the most functional and aesthetic scalp reconstruction, with the least amount of complexity. NA.

Size matters: relationships between body size and body mass of common coastal, aquatic invertebrates in the Baltic Sea

PubMed Central

Austin, Åsa; Bergström, Ulf; Donadi, Serena; Eriksson, Britas D.H.K.; Hansen, Joakim; Sundblad, Göran

2017-01-01

Background Organism biomass is one of the most important variables in ecological studies, making biomass estimations one of the most common laboratory tasks. Biomass of small macroinvertebrates is usually estimated as dry mass or ash-free dry mass (hereafter ‘DM’ vs. ‘AFDM’) per sample; a laborious and time consuming process, that often can be speeded up using easily measured and reliable proxy variables like body size or wet (fresh) mass. Another common way of estimating AFDM (one of the most accurate but also time-consuming estimates of biologically active tissue mass) is the use of AFDM/DM ratios as conversion factors. So far, however, these ratios typically ignore the possibility that the relative mass of biologically active vs. non-active support tissue (e.g., protective exoskeleton or shell)—and therefore, also AFDM/DM ratios—may change with body size, as previously shown for taxa like spiders, vertebrates and trees. Methods We collected aquatic, epibenthic macroinvertebrates (>1 mm) in 32 shallow bays along a 360 km stretch of the Swedish coast along the Baltic Sea; one of the largest brackish water bodies on Earth. We then estimated statistical relationships between the body size (length or height in mm), body dry mass and ash-free dry mass for 14 of the most common taxa; five gastropods, three bivalves, three crustaceans and three insect larvae. Finally, we statistically estimated the potential influence of body size on the AFDM/DM ratio per taxon. Results For most taxa, non-linear regression models describing the power relationship between body size and (i) DM and (ii) AFDM fit the data well (as indicated by low SE and high R2). Moreover, for more than half of the taxa studied (including the vast majority of the shelled molluscs), body size had a negative influence on organism AFDM/DM ratios. Discussion The good fit of the modelled power relationships suggests that the constants reported here can be used to quickly estimate organism dry- and ash-free dry mass based on body size, thereby freeing up considerable work resources. However, the considerable differences in constants between taxa emphasize the need for taxon-specific relationships, and the potential dangers associated with ignoring body size. The negative influence of body size on the AFDM/DM ratio found in a majority of the molluscs could be caused by increasingly thicker shells with organism age, and/or spawning-induced loss of biologically active tissue in adults. Consequently, future studies utilizing AFDM/DM (and presumably also AFDM/wet mass) ratios should carefully assess the potential influence of body size to ensure more reliable estimates of organism body mass. PMID:28149685

Size matters: relationships between body size and body mass of common coastal, aquatic invertebrates in the Baltic Sea.

PubMed

Eklöf, Johan; Austin, Åsa; Bergström, Ulf; Donadi, Serena; Eriksson, Britas D H K; Hansen, Joakim; Sundblad, Göran

2017-01-01

Organism biomass is one of the most important variables in ecological studies, making biomass estimations one of the most common laboratory tasks. Biomass of small macroinvertebrates is usually estimated as dry mass or ash-free dry mass (hereafter 'DM' vs. 'AFDM') per sample; a laborious and time consuming process, that often can be speeded up using easily measured and reliable proxy variables like body size or wet (fresh) mass. Another common way of estimating AFDM (one of the most accurate but also time-consuming estimates of biologically active tissue mass) is the use of AFDM/DM ratios as conversion factors. So far, however, these ratios typically ignore the possibility that the relative mass of biologically active vs. non-active support tissue (e.g., protective exoskeleton or shell)-and therefore, also AFDM/DM ratios-may change with body size, as previously shown for taxa like spiders, vertebrates and trees. We collected aquatic, epibenthic macroinvertebrates (>1 mm) in 32 shallow bays along a 360 km stretch of the Swedish coast along the Baltic Sea; one of the largest brackish water bodies on Earth. We then estimated statistical relationships between the body size (length or height in mm), body dry mass and ash-free dry mass for 14 of the most common taxa; five gastropods, three bivalves, three crustaceans and three insect larvae. Finally, we statistically estimated the potential influence of body size on the AFDM/DM ratio per taxon. For most taxa, non-linear regression models describing the power relationship between body size and (i) DM and (ii) AFDM fit the data well (as indicated by low SE and high R 2 ). Moreover, for more than half of the taxa studied (including the vast majority of the shelled molluscs), body size had a negative influence on organism AFDM/DM ratios. The good fit of the modelled power relationships suggests that the constants reported here can be used to quickly estimate organism dry- and ash-free dry mass based on body size, thereby freeing up considerable work resources. However, the considerable differences in constants between taxa emphasize the need for taxon-specific relationships, and the potential dangers associated with ignoring body size. The negative influence of body size on the AFDM/DM ratio found in a majority of the molluscs could be caused by increasingly thicker shells with organism age, and/or spawning-induced loss of biologically active tissue in adults. Consequently, future studies utilizing AFDM/DM (and presumably also AFDM/wet mass) ratios should carefully assess the potential influence of body size to ensure more reliable estimates of organism body mass.

Penile size and penile enlargement surgery: a review.

PubMed

Dillon, B E; Chama, N B; Honig, S C

2008-01-01

Penile size is a considerable concern for men of all ages. Herein, we review the data on penile size and conditions that will result in penile shortening. Penile augmentation procedures are discussed, including indications, procedures and complications of penile lengthening procedures, penile girth enhancement procedures and penile skin reconstruction.

4 CFR 21.5 - Protest issues not for consideration.

Code of Federal Regulations, 2010 CFR

2010-01-01

... official to file a protest or not to file a protest in connection with a public-private competition. [61 FR... business size standards and North American Industry Classification System (NAICS) standards. Challenges of established size standards or the size status of particular firms, and challenges of the selected NAICS code...

Effect of lateral size and thickness on the electronic structure and optical properties of quasi two-dimensional CdSe and CdS nanoplatelets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bose, Sumanta; Fan, W. J., E-mail: ewjfan@ntu.edu.sg; Zhang, D. H.

2016-04-14

The effect of lateral size and vertical thickness of CdSe and CdS nanoplatelets (NPLs) on their electronic structure and optical properties are investigated using an effective-mass envelope function theory based on the 8-band k ⋅ p model with valence force field considerations. Volumetrically larger NPLs have lower photon emission energy due to limited quantum confinement, but a greater transition matrix element (TME) due to larger electron-hole wavefunction overlap. The optical gain characteristics depend on several factors such as TME, Fermi factor, carrier density, NPL dimensions, material composition, and dephasing rate. There is a red shift in the peak position, moremore » so with an increase in thickness than lateral size. For an increasing carrier density, the gain spectrum undergoes a slight blue shift due to band filling effect. For a fixed carrier density, the Fermi factor is higher for volumetrically larger NPLs and so is the difference between the quasi-Fermi level separation and the effective bandgap. The transparency injection carrier density (and thus input current density threshold) is dimension dependent and falls for volumetrically larger NPLs, as they can attain the requisite exciton count for transparency with a relatively lower density. Between CdSe and CdS, CdSe has lower emission energy due to smaller bandgap, but a higher TME due to lower effective mass. CdS, however, has a higher so hole contribution due to a lower spin-orbit splitting energy. Both CdSe and CdS NPLs are suitable candidates for short-wavelength LEDs and lasers in the visible spectrum, but CdSe is expected to exhibit better optical performance.« less

Finding the "Right-Size" Physical Therapy Workforce: International Perspective Across 4 Countries.

PubMed

Jesus, Tiago S; Koh, Gerald; Landry, Michel; Ong, Peck-Hoon; Lopes, António M F; Green, Peter L; Hoenig, Helen

2016-10-01

Finding the "right-size" physical therapy workforce is an increasingly important issue, but it has had limited study, particularly across nations. This perspective article provides a comprehensive examination of physical therapy workforce issues across 4 countries (United States, Singapore, Portugal, and Bangladesh), which were deliberately selected to allow consideration of key contextual factors. This investigation provides a theoretical model uniquely adapted to focus on variables most likely to affect physical therapy workforce needs. This theoretical model was used to guide acquisition of public domain data across the respective countries. The data then were used to provide a contextualized interpretation about the physical therapy workforce supply (ie, physical therapists per capita) across the 4 countries in light of the following factors: indicators of physical therapy need, financial and administrative barriers affecting physical therapy access and demand, the proportion of physical therapy graduates (with varying trends over time across the countries), and the role of emigration/immigration in supply inequalities among countries of lower and higher income. In addition, both the physical therapy workforce supply and scope of practice were analyzed in the context of other related professions across the 4 countries. This international comparison indicated that there may not be a "one-size-fits-all" recommendation for physical therapy workforce supply across countries or an ideal formula for its determination. The optimal, country-specific physical therapy workforce supply appears to be affected by discipline-specific health care and contextual factors that may vary across countries, and even within the same country. This article provides a conceptual framework and basis for such contextualized evaluations of the physical therapy workforce. © 2016 American Physical Therapy Association.

Does consideration of larger study areas yield more accurate estimates of air pollution health effects? An illustration of the bias-variance trade-off in air pollution epidemiology.

PubMed

Pedersen, Marie; Siroux, Valérie; Pin, Isabelle; Charles, Marie Aline; Forhan, Anne; Hulin, Agnés; Galineau, Julien; Lepeule, Johanna; Giorgis-Allemand, Lise; Sunyer, Jordi; Annesi-Maesano, Isabella; Slama, Rémy

2013-10-01

Spatially-resolved air pollution models can be developed in large areas. The resulting increased exposure contrasts and population size offer opportunities to better characterize the effect of atmospheric pollutants on respiratory health. However the heterogeneity of these areas may also enhance the potential for confounding. We aimed to discuss some analytical approaches to handle this trade-off. We modeled NO2 and PM10 concentrations at the home addresses of 1082 pregnant mothers from EDEN cohort living in and around urban areas, using ADMS dispersion model. Simulations were performed to identify the best strategy to limit confounding by unmeasured factors varying with area type. We examined the relation between modeled concentrations and respiratory health in infants using regression models with and without adjustment or interaction terms with area type. Simulations indicated that adjustment for area limited the bias due to unmeasured confounders varying with area at the costs of a slight decrease in statistical power. In our cohort, rural and urban areas differed for air pollution levels and for many factors associated with respiratory health and exposure. Area tended to modify effect measures of air pollution on respiratory health. Increasing the size of the study area also increases the potential for residual confounding. Our simulations suggest that adjusting for type of area is a good option to limit residual confounding due to area-associated factors without restricting the area size. Other statistical approaches developed in the field of spatial epidemiology are an alternative to control for poorly-measured spatially-varying confounders. © 2013 Elsevier Ltd. All rights reserved.

Fluctuations in energy loss and their implications for dosimetry and radiobiology

NASA Technical Reports Server (NTRS)

Baily, N. A.; Steigerwalt, J. E.

1972-01-01

Serious consideration of the physics of energy deposition indicates that a fundamental change in the interpretation of absorbed dose is required at least for considerations of effects in biological systems. In addition, theoretical approaches to radiobiology and microdosimetry seem to require statistical considerations incorporating frequency distributions of the magnitude of the event sizes within the volume of interest.

Thermodynamic limits on the size and size distribution of nucleic acids synthesized in vitro: the role of pyrophosphate hydrolysis.

PubMed

Peller, L

1977-02-08

The free-energy change of phosphodiester bond formation from nucleoside triphosphates is more favorable than with nucleoside diphosphates as substrates. Base-stacking interactions can make significant contributions to both delta G degrees ' values. Pyrophosphate hydrolysis when it accompanies the former reaction dominates all thermodynamic considerations. Three experimental situations are discussed in which high-molecular-weight polynucleotides are synthesized without a strong driving force for covalent bond formation. For one of these, a kinetic scheme is presented which encompasses an early narrow Poisson distribution of chain lengths with ultimate passage to a disperse equilibrium population of chain sizes. Hydrolytic removal of pyrophosphate expands the time scale for this undesirable process by a factor of 10(9), while it enormously elevates the thermodynamic ceiling for the average degrees of polymerization in the other two examples. The electron micrographically revealed broad size population from an early study of partial replication of a T7 DNA template is found to adhere (fortuitously) to a disperse most probable representation. Some possible origins are examined for the branched structures in this product, as well as in a later investigation of replication of this nucleic acid. The achievement of both very high molecular weights and sharply peaked size distributions in polynucleotides synthesized in vitro will require coupling to inorganic pyrophosphatase action as in vivo.

Tuning domain size and crystallinity in isoindigo/PCBM organic solar cells via solution shearing

DOE PAGES

Gu, Kevin L.; Zhou, Yan; Gu, Xiaodan; ...

2016-11-01

Despite having achieved the long sought-after performance of 10% power conversion efficiency, high performance organic photovoltaics (OPVs) are still mostly constrained to lab scale devices fabricated by spin coating. Efforts to produce printed OPVs lag considerably behind, and the sensitivity to different fabrication methods highlights the need to develop a comprehensive understanding of the processing-morphology relationship in printing methods. Here we present a systematic experimental investigation of a model low bandgap polymer/fullerene system, poly-isoindigo thienothiophene/PC 61BM, using a lab-scale analogue to roll-to-roll coating as the fabrication tool in order to understand the impact of processing parameters on morphological evolution. Wemore » report that domain size and polymer crystallinity can be tuned by a factor of two by controlling the temperature and coating speed. Lower fabrication temperature simultaneously decreased the phase separation domain size and increased the relative degree of crystallinity in those domains, leading to improved photocurrent. We conclude that domain size in isoindigo/PCBM is dictated by spontaneous phase separation rather than crystal nucleation and growth. Moreover we present a model to describe the temperature dependence of domain size formation in our system, which demonstrates that morphology is not necessarily strictly dependent on the evaporation rate, but rather on the interplay between evaporation and diffusion during the printing process.« less

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2014 CFR

2014-01-01

... FINANCIAL MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2012 CFR

2012-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

12 CFR 1320.10 - Factors for consideration in designations.

Code of Federal Regulations, 2013 CFR

2013-01-01

... MARKET UTILITIES Consultations, Determinations and Hearings § 1320.10 Factors for consideration in designations. In making any proposed or final determination with respect to whether a financial market utility... consideration: (a) The aggregate monetary value of transactions processed by the financial market utility...

Indomethacin nanocrystals prepared by different laboratory scale methods: effect on crystalline form and dissolution behavior

NASA Astrophysics Data System (ADS)

Martena, Valentina; Censi, Roberta; Hoti, Ela; Malaj, Ledjan; Di Martino, Piera

2012-12-01

The objective of this study is to select very simple and well-known laboratory scale methods able to reduce particle size of indomethacin until the nanometric scale. The effect on the crystalline form and the dissolution behavior of the different samples was deliberately evaluated in absence of any surfactants as stabilizers. Nanocrystals of indomethacin (native crystals are in the γ form) (IDM) were obtained by three laboratory scale methods: A (Batch A: crystallization by solvent evaporation in a nano-spray dryer), B (Batch B-15 and B-30: wet milling and lyophilization), and C (Batch C-20-N and C-40-N: Cryo-milling in the presence of liquid nitrogen). Nanocrystals obtained by the method A (Batch A) crystallized into a mixture of α and γ polymorphic forms. IDM obtained by the two other methods remained in the γ form and a different attitude to the crystallinity decrease were observed, with a more considerable decrease in crystalline degree for IDM milled for 40 min in the presence of liquid nitrogen. The intrinsic dissolution rate (IDR) revealed a higher dissolution rate for Batches A and C-40-N, due to the higher IDR of α form than γ form for the Batch A, and the lower crystallinity degree for both the Batches A and C-40-N. These factors, as well as the decrease in particle size, influenced the IDM dissolution rate from the particle samples. Modifications in the solid physical state that may occur using different particle size reduction treatments have to be taken into consideration during the scale up and industrial development of new solid dosage forms.

Diverse effects of degree of urbanisation and forest size on species richness and functional diversity of plants, and ground surface-active ants and spiders

PubMed Central

Melliger, Ramona Laila; Rusterholz, Hans-Peter; Baur, Bruno

2018-01-01

Urbanisation is increasing worldwide and is regarded a major driver of environmental change altering local species assemblages in urban green areas. Forests are one of the most frequent habitat types in urban landscapes harbouring many native species and providing important ecosystem services. By using a multi-taxa approach covering a range of trophic ranks, we examined the influence of degree of urbanisation and forest size on the species richness and functional diversity of plants, and ground surface-active ants and spiders. We conducted field surveys in twenty-six forests in the urban region of Basel, Switzerland. We found that a species’ response to urbanisation varied depending on trophic rank, habitat specificity and the diversity indices used. In plants, species richness decreased with degree of urbanisation, whereas that of both arthropod groups was not affected. However, ants and spiders at higher trophic rank showed greater shifts in species composition with increasing degree of urbanisation, and the percentage of forest specialists in both arthropod groups increased with forest size. Local abiotic site characteristics were also crucial for plant species diversity and species composition, while the structural diversity of both leaf litter and vegetation was important for the diversity of ants and spiders. Our results highlight that even small urban forests can harbour a considerable biodiversity including habitat specialists. Nonetheless, urbanisation directly and indirectly caused major shifts in species composition. Therefore, special consideration needs to be given to vulnerable species, including those with special habitat requirements. Locally adapted management practices could be a step forward to enhance habitat quality in a way to maximize diversity of forest species and thus ensure forest ecosystem functioning; albeit large-scale factors also remain important. PMID:29920553

Diverse effects of degree of urbanisation and forest size on species richness and functional diversity of plants, and ground surface-active ants and spiders.

PubMed

Melliger, Ramona Laila; Braschler, Brigitte; Rusterholz, Hans-Peter; Baur, Bruno

2018-01-01

Urbanisation is increasing worldwide and is regarded a major driver of environmental change altering local species assemblages in urban green areas. Forests are one of the most frequent habitat types in urban landscapes harbouring many native species and providing important ecosystem services. By using a multi-taxa approach covering a range of trophic ranks, we examined the influence of degree of urbanisation and forest size on the species richness and functional diversity of plants, and ground surface-active ants and spiders. We conducted field surveys in twenty-six forests in the urban region of Basel, Switzerland. We found that a species' response to urbanisation varied depending on trophic rank, habitat specificity and the diversity indices used. In plants, species richness decreased with degree of urbanisation, whereas that of both arthropod groups was not affected. However, ants and spiders at higher trophic rank showed greater shifts in species composition with increasing degree of urbanisation, and the percentage of forest specialists in both arthropod groups increased with forest size. Local abiotic site characteristics were also crucial for plant species diversity and species composition, while the structural diversity of both leaf litter and vegetation was important for the diversity of ants and spiders. Our results highlight that even small urban forests can harbour a considerable biodiversity including habitat specialists. Nonetheless, urbanisation directly and indirectly caused major shifts in species composition. Therefore, special consideration needs to be given to vulnerable species, including those with special habitat requirements. Locally adapted management practices could be a step forward to enhance habitat quality in a way to maximize diversity of forest species and thus ensure forest ecosystem functioning; albeit large-scale factors also remain important.

Lessons for public health campaigns from analysing commercial food marketing success factors: a case study.

PubMed

Aschemann-Witzel, Jessica; Perez-Cueto, Federico J A; Niedzwiedzka, Barbara; Verbeke, Wim; Bech-Larsen, Tino

2012-02-21

Commercial food marketing has considerably shaped consumer food choice behaviour. Meanwhile, public health campaigns for healthier eating have had limited impact to date. Social marketing suggests that successful commercial food marketing campaigns can provide useful lessons for public sector activities. The aim of the present study was to empirically identify food marketing success factors that, using the social marketing approach, could help improve public health campaigns to promote healthy eating. In this case-study analysis, 27 recent and successful commercial food and beverage marketing cases were purposively sampled from different European countries. The cases involved different consumer target groups, product categories, company sizes and marketing techniques. The analysis focused on cases of relatively healthy food types, and nutrition and health-related aspects in the communication related to the food. Visual as well as written material was gathered, complemented by semi-structured interviews with 12 food market trend experts and 19 representatives of food companies and advertising agencies. Success factors were identified by a group of experts who reached consensus through discussion structured by a card sorting method. Six clusters of success factors emerged from the analysis and were labelled as "data and knowledge", "emotions", "endorsement", "media", "community" and "why and how". Each cluster subsumes two or three success factors and is illustrated by examples. In total, 16 factors were identified. It is argued that the factors "nutritional evidence", "trend awareness", "vertical endorsement", "simple naturalness" and "common values" are of particular importance in the communication of health with regard to food. The present study identified critical factors for the success of commercial food marketing campaigns related to the issue of nutrition and health, which are possibly transferable to the public health sector. Whether or not a particular factor contributes to future success depends on the specific context of use, the combination of factors and the environment. Consideration of the specific applicability of the success factors identified in this study during the design of marketing activities could benefit public sector food and health-related campaigns.

Lessons for public health campaigns from analysing commercial food marketing success factors: a case study

PubMed Central

2012-01-01

Background Commercial food marketing has considerably shaped consumer food choice behaviour. Meanwhile, public health campaigns for healthier eating have had limited impact to date. Social marketing suggests that successful commercial food marketing campaigns can provide useful lessons for public sector activities. The aim of the present study was to empirically identify food marketing success factors that, using the social marketing approach, could help improve public health campaigns to promote healthy eating. Methods In this case-study analysis, 27 recent and successful commercial food and beverage marketing cases were purposively sampled from different European countries. The cases involved different consumer target groups, product categories, company sizes and marketing techniques. The analysis focused on cases of relatively healthy food types, and nutrition and health-related aspects in the communication related to the food. Visual as well as written material was gathered, complemented by semi-structured interviews with 12 food market trend experts and 19 representatives of food companies and advertising agencies. Success factors were identified by a group of experts who reached consensus through discussion structured by a card sorting method. Results Six clusters of success factors emerged from the analysis and were labelled as "data and knowledge", "emotions", "endorsement", "media", "community" and "why and how". Each cluster subsumes two or three success factors and is illustrated by examples. In total, 16 factors were identified. It is argued that the factors "nutritional evidence", "trend awareness", "vertical endorsement", "simple naturalness" and "common values" are of particular importance in the communication of health with regard to food. Conclusions The present study identified critical factors for the success of commercial food marketing campaigns related to the issue of nutrition and health, which are possibly transferable to the public health sector. Whether or not a particular factor contributes to future success depends on the specific context of use, the combination of factors and the environment. Consideration of the specific applicability of the success factors identified in this study during the design of marketing activities could benefit public sector food and health-related campaigns. PMID:22353342

Health Science students' evaluation of courses and Instructors: the effect of response rate and class size interaction.

PubMed

Kuwaiti, Ahmed Al

2015-01-01

This study aims at investigating the effect of response rate and class size interaction on students' evaluation of instructors and the courses offered at heath science colleges in Saudi Arabia. A retrospective study design was adapted to ascertain Course Evaluation Surveys (CES) conducted at the health science colleges of the University of Dammam [UOD] in the academic year 2013-2014. Accordingly, the CES data which was downloaded from an exclusive online application 'UDQUEST' which includes 337 different courses and 15,264 surveys were utilized in this study. Two-way analysis of variance was utilized to test whether there is any significant interaction between the class size and the response rate on the students' evaluation of courses and instructors. The study showed that high response rate is required for student evaluation of instructors at Health Science colleges when the class size is small whereas a medium response rate is required for students' evaluation of courses. On the other hand, when the class size is medium, a medium or high response rate is needed for students' evaluation of both instructors and courses. The results of this study recommend that the administrators of the health science colleges to be aware of the interpretation of students' evaluations of courses and instructors. The study also suggests that the interaction between response rate and class size is a very important factor that needs to be taken into consideration while interpreting the findings of the students' evaluation of instructors and courses.

Effects of geomorphology, habitat, and spatial location on fish assemblages in a watershed in Ohio, USA.

PubMed

D'Ambrosio, Jessica L; Williams, Lance R; Witter, Jonathan D; Ward, Andy

2009-01-01

In this paper, we evaluate relationships between in-stream habitat, water chemistry, spatial distribution within a predominantly agricultural Midwestern watershed and geomorphic features and fish assemblage attributes and abundances. Our specific objectives were to: (1) identify and quantify key environmental variables at reach and system wide (watershed) scales; and (2) evaluate the relative influence of those environmental factors in structuring and explaining fish assemblage attributes at reach scales to help prioritize stream monitoring efforts and better incorporate all factors that influence aquatic biology in watershed management programs. The original combined data set consisted of 31 variables measured at 32 sites, which was reduced to 9 variables through correlation and linear regression analysis: stream order, percent wooded riparian zone, drainage area, in-stream cover quality, substrate quality, gradient, cross-sectional area, width of the flood prone area, and average substrate size. Canonical correspondence analysis (CCA) and variance partitioning were used to relate environmental variables to fish species abundance and assemblage attributes. Fish assemblages and abundances were explained best by stream size, gradient, substrate size and quality, and percent wooded riparian zone. Further data are needed to investigate why water chemistry variables had insignificant relationships with IBI scores. Results suggest that more quantifiable variables and consideration of spatial location of a stream reach within a watershed system should be standard data incorporated into stream monitoring programs to identify impairments that, while biologically limiting, are not fully captured or elucidated using current bioassessment methods.

Assessing exposure to diesel exhaust particles: a case study.

PubMed

See, Siao Wei; Balasubramanian, Rajasekhar; Yang, Tzuo Sern; Karthikeyan, Sathrugnan

2006-11-01

The assessment of the vehicular contributions to urban pollution levels is of particular importance given the current interest in the possible adverse health effects. This study focused on human exposure to diesel-engine-derived particulate matter. Diesel vehicles are known to emit fine particulate matter (PM2.5) containing carcinogens such as polycyclic aromatic hydrocarbons (PAHs), and have therefore received considerable attention. In this study, the physical (mass and number concentration, and size distribution) and chemical (PAHs) properties were investigated at a major bus interchange in Singapore, influenced only by diesel exhausts. Number concentration and size distribution of particles were determined in real time, while the mass concentrations of PM2.5, and PAHs were measured during operating and nonoperating hours. The average mass concentrations of PM2.5 and PAHs increased by a factor of 2.34 and 5.18, respectively, during operating hours. The average number concentration was also elevated by a factor of 5.07 during operating hours. This increase in the concentration of PM2.5 particles and their chemical constituents during operating hours was attributable to diesel emissions from in-use buses based on the particle size analysis, correlation among PAHs, and the commonly used PAHs diagnostic ratios. To evaluate the potential health threat due inhalation of air pollutants released from diesel engines, the incremental lifetime cancer risk was also calculated for a maximally exposed individual. The findings indicate that the air quality at the bus interchange poses adverse health effects.

Lattice Boltzmann simulation of the gas-solid adsorption process in reconstructed random porous media.

PubMed

Zhou, L; Qu, Z G; Ding, T; Miao, J Y

2016-04-01

The gas-solid adsorption process in reconstructed random porous media is numerically studied with the lattice Boltzmann (LB) method at the pore scale with consideration of interparticle, interfacial, and intraparticle mass transfer performances. Adsorbent structures are reconstructed in two dimensions by employing the quartet structure generation set approach. To implement boundary conditions accurately, all the porous interfacial nodes are recognized and classified into 14 types using a proposed universal program called the boundary recognition and classification program. The multiple-relaxation-time LB model and single-relaxation-time LB model are adopted to simulate flow and mass transport, respectively. The interparticle, interfacial, and intraparticle mass transfer capacities are evaluated with the permeability factor and interparticle transfer coefficient, Langmuir adsorption kinetics, and the solid diffusion model, respectively. Adsorption processes are performed in two groups of adsorbent media with different porosities and particle sizes. External and internal mass transfer resistances govern the adsorption system. A large porosity leads to an early time for adsorption equilibrium because of the controlling factor of external resistance. External and internal resistances are dominant at small and large particle sizes, respectively. Particle size, under which the total resistance is minimum, ranges from 3 to 7 μm with the preset parameters. Pore-scale simulation clearly explains the effect of both external and internal mass transfer resistances. The present paper provides both theoretical and practical guidance for the design and optimization of adsorption systems.

Lattice Boltzmann simulation of the gas-solid adsorption process in reconstructed random porous media

NASA Astrophysics Data System (ADS)

Zhou, L.; Qu, Z. G.; Ding, T.; Miao, J. Y.

2016-04-01

The gas-solid adsorption process in reconstructed random porous media is numerically studied with the lattice Boltzmann (LB) method at the pore scale with consideration of interparticle, interfacial, and intraparticle mass transfer performances. Adsorbent structures are reconstructed in two dimensions by employing the quartet structure generation set approach. To implement boundary conditions accurately, all the porous interfacial nodes are recognized and classified into 14 types using a proposed universal program called the boundary recognition and classification program. The multiple-relaxation-time LB model and single-relaxation-time LB model are adopted to simulate flow and mass transport, respectively. The interparticle, interfacial, and intraparticle mass transfer capacities are evaluated with the permeability factor and interparticle transfer coefficient, Langmuir adsorption kinetics, and the solid diffusion model, respectively. Adsorption processes are performed in two groups of adsorbent media with different porosities and particle sizes. External and internal mass transfer resistances govern the adsorption system. A large porosity leads to an early time for adsorption equilibrium because of the controlling factor of external resistance. External and internal resistances are dominant at small and large particle sizes, respectively. Particle size, under which the total resistance is minimum, ranges from 3 to 7 μm with the preset parameters. Pore-scale simulation clearly explains the effect of both external and internal mass transfer resistances. The present paper provides both theoretical and practical guidance for the design and optimization of adsorption systems.

Designing to Save Energy

ERIC Educational Resources Information Center

Santamaria, Joseph W.

1977-01-01

While tripling the campus size of Alvin Community College in Texas, architects and engineers cut back on nonessential lighting, recaptured waste heat, insulated everything possible, and let energy considerations dictate the size and shape of the building. (Author/MLF)

Effects of resource-dependent cannibalism on population size distribution and individual life history in a case-bearing caddisfly

PubMed Central

Okuda, Noboru

2018-01-01

Resource availability often determines the intensity of cannibalism, which has a considerable effect on population size distribution and individual life history. Larvae of the caddisfly Psilotreta kisoensis build portable cases from sedimentary sands and often display cannibalism. For this species, the availability of preferable case material is a critical factor that affects larval fitness, and material is locally variable depending on the underlying geology. In this study, we investigated how sand quality as a case material determines cannibalism frequency among larvae and, in turn, how the differential cannibalism frequency affects the body-size distribution and voltinism. Rearing experiments within a cohort revealed that a bimodal size distribution developed regardless of material quality. However, as the preferable material became abundant, the proportion of larger to smaller individuals increased. Consecutive experiments suggested that smaller larvae were more frequently cannibalized by larger ones and excluded from the population when preferable smooth material was abundant. This frequent cannibalism resulted in a bimodal size distribution with a significantly higher proportion of larger compared to smaller individuals. The size-dependent cannibalism was significantly suppressed when the larvae were raised in an environment with a scarcity of the preferable case material. This is probably because larvae cannot enjoy the benefit of rapid growth by cannibalism due to the difficulties in enlarging their case. At low cannibalism the growth of smaller individuals was stunted, and this was probably due to risk of cannibalism by larger individuals. This growth reduction in small individuals led to a bimodal size-distribution but with a lower proportion of larger to smaller individuals compared to at high cannibalism. A field study in two streams showed a similar size distribution of larvae as was found in the rearing experiment. The bimodal ratio has consequences for life history, since a size-bimodal population causes a cohort splitting: only larvae that were fully grown at 1 year had a univoltine life cycle, whereas larvae with a stunted growth continued their larval life for another year (semivoltine). This study suggests that availability of preferable case building material is an important factor that affects cannibalism, which in turn affects larval population size structure and cohort splitting. PMID:29466375

Effects of resource-dependent cannibalism on population size distribution and individual life history in a case-bearing caddisfly.

PubMed

Okano, Jun-Ichi; Okuda, Noboru

2018-01-01

Resource availability often determines the intensity of cannibalism, which has a considerable effect on population size distribution and individual life history. Larvae of the caddisfly Psilotreta kisoensis build portable cases from sedimentary sands and often display cannibalism. For this species, the availability of preferable case material is a critical factor that affects larval fitness, and material is locally variable depending on the underlying geology. In this study, we investigated how sand quality as a case material determines cannibalism frequency among larvae and, in turn, how the differential cannibalism frequency affects the body-size distribution and voltinism. Rearing experiments within a cohort revealed that a bimodal size distribution developed regardless of material quality. However, as the preferable material became abundant, the proportion of larger to smaller individuals increased. Consecutive experiments suggested that smaller larvae were more frequently cannibalized by larger ones and excluded from the population when preferable smooth material was abundant. This frequent cannibalism resulted in a bimodal size distribution with a significantly higher proportion of larger compared to smaller individuals. The size-dependent cannibalism was significantly suppressed when the larvae were raised in an environment with a scarcity of the preferable case material. This is probably because larvae cannot enjoy the benefit of rapid growth by cannibalism due to the difficulties in enlarging their case. At low cannibalism the growth of smaller individuals was stunted, and this was probably due to risk of cannibalism by larger individuals. This growth reduction in small individuals led to a bimodal size-distribution but with a lower proportion of larger to smaller individuals compared to at high cannibalism. A field study in two streams showed a similar size distribution of larvae as was found in the rearing experiment. The bimodal ratio has consequences for life history, since a size-bimodal population causes a cohort splitting: only larvae that were fully grown at 1 year had a univoltine life cycle, whereas larvae with a stunted growth continued their larval life for another year (semivoltine). This study suggests that availability of preferable case building material is an important factor that affects cannibalism, which in turn affects larval population size structure and cohort splitting.

Interference between light and heavy neutrinos for 0 νββ decay in the left–right symmetric model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ahmed, Fahim; Neacsu, Andrei; Horoi, Mihai

Neutrinoless double-beta decay is proposed as an important low energy phenomenon that could test beyond the Standard Model physics. There are several potentially competing beyond the Standard Model mechanisms that can induce the process. It thus becomes important to disentangle the different processes. In the present study we consider the interference effect between the light left-handed and heavy right-handed Majorana neutrino exchange mechanisms. The decay rate, and consequently, the phase-space factors for the interference term are derived, based on the left–right symmetric model. The numerical values for the interference phase-space factors for several nuclides are calculated, taking into consideration themore » relativistic Coulomb distortion of the electron wave function and finite-size of the nucleus. As a result, the variation of the interference effect with the Q-value of the process is studied.« less

Interference between light and heavy neutrinos for 0 νββ decay in the left–right symmetric model

DOE PAGES

Ahmed, Fahim; Neacsu, Andrei; Horoi, Mihai

2017-03-31

Neutrinoless double-beta decay is proposed as an important low energy phenomenon that could test beyond the Standard Model physics. There are several potentially competing beyond the Standard Model mechanisms that can induce the process. It thus becomes important to disentangle the different processes. In the present study we consider the interference effect between the light left-handed and heavy right-handed Majorana neutrino exchange mechanisms. The decay rate, and consequently, the phase-space factors for the interference term are derived, based on the left–right symmetric model. The numerical values for the interference phase-space factors for several nuclides are calculated, taking into consideration themore » relativistic Coulomb distortion of the electron wave function and finite-size of the nucleus. As a result, the variation of the interference effect with the Q-value of the process is studied.« less

Spatially Characterizing Effective Timber Supply

NASA Technical Reports Server (NTRS)

Berry, J. K.; Sailor, J.

1982-01-01

The structure of a computer-oriented cartographic model for assessing roundwood supply for generation of base load electricity is discussed. The model provides an analytical procedure for coupling spatial information of harvesting economics and owner willingness to sell stumpages. Supply is characterized in terms of standing timber; of accessibility considering various harvesting and hauling factors; and of availability as affected by ownership and residential patterns. Factors governing accessibility to timber include effective harvesting distance to haulic roads as modified by barriers and slopes. Haul distance is expressed in units that take into account the relative ease of travel along various road types to a central processing facility. Areas of accessible timber are grouped into spatial units, termed 'timbersheds', of common access to particular haul road segments that belong to unique 'transport zones'. Timber availability considerations include size of ownership parcels, housing density and excluded areas. The analysis techniques are demonstrated for a cartographic data base in western Massachusetts.

An analytical study of the effect of airplane wake on the lateral dispersion of aerial sprays

NASA Technical Reports Server (NTRS)

Reed, Wilmer H , III

1954-01-01

Calculations are made to determine the trajectories of liquid droplets introduced into the air disturbances generated by an airplane engaged in aerial spraying. The effects of such factors as the positions at which droplets are ejected into the disturbances, airplane lift coefficient, and altitude are investigated. The distribution of deposit on the ground is computed for several droplet-size spectra, variations in the rate at which mass is ejected along the span, and lateral flight-path spacings. Consideration is then given to the problem of adjusting these factors with the aim of improving the uniformity and increasing the effective width of the deposit. The results indicate that the lateral dispersion of droplets is increased when the spanwise position at which particles are ejected is moved toward the wing tip. Greater dispersion also results when the airplane lift coefficient or altitude is increased.

Integrative assessment of multiple pesticides as risk factors for non-Hodgkin's lymphoma among men

PubMed Central

De Roos, A J; Zahm, S; Cantor, K; Weisenburger, D; Holmes, F; Burmeister, L; Blair, A

2003-01-01

Methods: During the 1980s, the National Cancer Institute conducted three case-control studies of NHL in the midwestern United States. These pooled data were used to examine pesticide exposures in farming as risk factors for NHL in men. The large sample size (n = 3417) allowed analysis of 47 pesticides simultaneously, controlling for potential confounding by other pesticides in the model, and adjusting the estimates based on a prespecified variance to make them more stable. Results: Reported use of several individual pesticides was associated with increased NHL incidence, including organophosphate insecticides coumaphos, diazinon, and fonofos, insecticides chlordane, dieldrin, and copper acetoarsenite, and herbicides atrazine, glyphosate, and sodium chlorate. A subanalysis of these "potentially carcinogenic" pesticides suggested a positive trend of risk with exposure to increasing numbers. Conclusion: Consideration of multiple exposures is important in accurately estimating specific effects and in evaluating realistic exposure scenarios. PMID:12937207

A Summary of The 2000-2001 NASA Glenn Lear Jet AM0 Solar Cell Calibration Program

NASA Technical Reports Server (NTRS)

Scheiman, David; Brinker, David; Snyder, David; Baraona, Cosmo; Jenkins, Phillip; Rieke, William J.; Blankenship, Kurt S.; Tom, Ellen M.

2002-01-01

Calibration of solar cells for space is extremely important for satellite power system design. Accurate prediction of solar cell performance is critical to solar array sizing, often required to be within 1%. The NASA Glenn Research Center solar cell calibration airplane facility has been in operation since 1963 with 531 flights to date. The calibration includes real data to Air Mass (AM) 0.2 and uses the Langley plot method plus an ozone correction factor to extrapolate to AM0. Comparison of the AM0 calibration data indicates that there is good correlation with Balloon and Shuttle flown solar cells. This paper will present a history of the airplane calibration procedure, flying considerations, and a brief summary of the previous flying season with some measurement results. This past flying season had a record 35 flights. It will also discuss efforts to more clearly define the ozone correction factor.

Population dynamics and rural poverty.

PubMed

Fong, M S

1985-01-01

An overview of the relationship between demographic factors and rural poverty in developing countries is presented. The author examines both the micro- and macro-level perspectives of this relationship and the determinants and consequences of population growth. The author notes the prospects for a rapid increase in the rural labor force and considers its implications for the agricultural production structure and the need for institutional change. Consideration is also given to the continuing demand for high fertility at the family level and the role of infant and child mortality in the poverty cycle. "The paper concludes by drawing attention to the need for developing the mechanism for reconciliation of social and individual optima with respect to family size and population growth." The need for rural development projects that take demographic factors into account is stressed as is the need for effective population programs. (summary in FRE, ITA) excerpt

Meningiomas involving the optic nerve: technical aspects and outcomes for a series of 50 patients.

PubMed

Margalit, Nevo S; Lesser, Jonathan B; Moche, Jason; Sen, Chandranath

2003-09-01

Surgical strategies and results for 50 patients with meningiomas involving the optic nerves are discussed and evaluated. Factors affecting the degree of resection and patient outcomes are presented. We emphasize our surgical techniques for resection of these tumors and we discuss the advantages of different approaches, depending on the relationship of the tumor to the optic nerves. Data for 50 patients with meningiomas involving the optic nerves who were surgically treated between 1991 and 2002 were reviewed, by using patient files, operative notes, and pre- and postoperative imaging and ophthalmological examination findings. Thirty-one female patients and 19 male patients, with a mean age of 53 years, were treated. Thirty-one patients (62%) underwent complete tumor removal (Simpson Grade 1 or 2), and 19 patients underwent subtotal removal (Grade 4). Factors affecting the grade of resection were tumor size (P = 0.01), location (P = 0.007), and internal carotid artery encasement (P = 0.019). Patients who underwent Grade 1 or 2 resection exhibited a mean tumor size of 3.0 cm, and patients who underwent Grade 4 resection exhibited a mean tumor size of 4.1 cm. Only three patients had residual tumor on the optic nerve; all others had tumor in the cavernous sinus or at the orbital apex or exhibited vascular involvement. Visual outcomes were influenced predominantly by tumor size, preoperative visual function, and optic nerve encasement. Meningiomas that involve the optic nerves require special considerations and surgical techniques. Early decompression of the optic nerve within the bony canal allows identification and separation of the tumor from the nerve, permitting removal of the tumor from this area with minimal manipulation of the optic nerve.

Standing wave design and optimization of a simulated moving bed chromatography for separation of xylobiose and xylose under the constraints on product concentration and pressure drop.

PubMed

Lee, Chung-Gi; Choi, Jae-Hwan; Park, Chanhun; Wang, Nien-Hwa Linda; Mun, Sungyong

2017-12-08

The feasibility of a simulated moving bed (SMB) technology for the continuous separation of high-purity xylobiose (X2) from the output of a β-xylosidase X1→X2 reaction has recently been confirmed. To ensure high economical efficiency of the X2 production method based on the use of xylose (X1) as a starting material, it is essential to accomplish the comprehensive optimization of the X2-separation SMB process in such a way that its X2 productivity can be maximized while maintaining the X2 product concentration from the SMB as high as possible in consideration of a subsequent lyophilization step. To address this issue, a suitable SMB optimization tool for the aforementioned task was prepared based on standing wave design theory. The prepared tool was then used to optimize the SMB operation parameters, column configuration, total column number, adsorbent particle size, and X2 yield while meeting the constraints on X2 purity, X2 product concentration, and pressure drop. The results showed that the use of a larger particle size caused the productivity to be limited by the constraint on X2 product concentration, and a maximum productivity was attained by choosing the particle size such that the effect of the X2-concentration limiting factor could be balanced with that of pressure-drop limiting factor. If the target level of X2 product concentration was elevated, higher productivity could be achieved by decreasing particle size, raising the level of X2 yield, and increasing the column number in the zones containing the front and rear of X2 solute band. Copyright © 2017 Elsevier B.V. All rights reserved.

Transport of dissolved organic matter in Boom Clay: Size effects

NASA Astrophysics Data System (ADS)

Durce, D.; Aertsens, M.; Jacques, D.; Maes, N.; Van Gompel, M.

2018-01-01

A coupled experimental-modelling approach was developed to evaluate the effects of molecular weight (MW) of dissolved organic matter (DOM) on its transport through intact Boom Clay (BC) samples. Natural DOM was sampled in-situ in the BC layer. Transport was investigated with percolation experiments on 1.5 cm BC samples by measuring the outflow MW distribution (MWD) by size exclusion chromatography (SEC). A one-dimensional reactive transport model was developed to account for retardation, diffusion and entrapment (attachment and/or straining) of DOM. These parameters were determined along the MWD by implementing a discretisation of DOM into several MW points and modelling the breakthrough of each point. The pore throat diameter of BC was determined as 6.6-7.6 nm. Below this critical size, transport of DOM is MW dependent and two major types of transport were identified. Below MW of 2 kDa, DOM was neither strongly trapped nor strongly retarded. This fraction had an averaged capacity factor of 1.19 ± 0.24 and an apparent dispersion coefficient ranging from 7.5 × 10- 11 to 1.7 × 10- 11 m2/s with increasing MW. DOM with MW > 2 kDa was affected by both retardation and straining that increased significantly with increasing MW while apparent dispersion coefficients decreased. Values ranging from 1.36 to 19.6 were determined for the capacity factor and 3.2 × 10- 11 to 1.0 × 10- 11 m2/s for the apparent dispersion coefficient for species with 2.2 kDa < MW < 9.3 kDa. Straining resulted in an immobilisation of in average 49 ± 6% of the injected 9.3 kDa species. Our findings show that an accurate description of DOM transport requires the consideration of the size effects.

Perception while watching movies: Effects of physical screen size and scene type

PubMed Central

Troscianko, Tom; Meese, Timothy S.; Hinde, Stephen

2012-01-01

Over the last decade, television screens and display monitors have increased in size considerably, but has this improved our televisual experience? Our working hypothesis was that the audiences adopt a general strategy that “bigger is better.” However, as our visual perceptions do not tap directly into basic retinal image properties such as retinal image size (C. A. Burbeck, 1987), we wondered whether object size itself might be an important factor. To test this, we needed a task that would tap into the subjective experiences of participants watching a movie on different-sized displays with the same retinal subtense. Our participants used a line bisection task to self-report their level of “presence” (i.e., their involvement with the movie) at several target locations that were probed in a 45-min section of the movie “The Good, The Bad, and The Ugly.” Measures of pupil dilation and reaction time to the probes were also obtained. In Experiment 1, we found that subjective ratings of presence increased with physical screen size, supporting our hypothesis. Face scenes also produced higher presence scores than landscape scenes for both screen sizes. In Experiment 2, reaction time and pupil dilation results showed the same trends as the presence ratings and pupil dilation correlated with presence ratings, providing some validation of the method. Overall, the results suggest that real-time measures of subjective presence might be a valuable tool for measuring audience experience for different types of (i) display and (ii) audiovisual material. PMID:23145293

The Comparability of the Standardized Mean Difference Effect Size across Different Measures of the Same Construct: Measurement Considerations

ERIC Educational Resources Information Center

Nugent, William R.

2006-01-01

One of the most important effect sizes used in meta-analysis is the standardized mean difference (SMD). In this article, the conditions under which SMD effect sizes based on different measures of the same construct are directly comparable are investigated. The results show that SMD effect sizes from different measures of the same construct are…

Analysis of intrinsic and extrinsic factors influencing the dynamics of bovine Eimeria spp. from central-eastern Poland.

PubMed

Tomczuk, Krzysztof; Grzybek, Maciej; Szczepaniak, Klaudiusz; Studzińska, Maria; Demkowska-Kutrzepa, Marta; Roczeń-Karczmarz, Monika; Klockiewicz, Maciej

2015-11-30

Eimeria infections are common in cattle worldwide, however, little is known about the invasion dynamics of this unicellular parasite. Therefore, the aim of this study was to analyze intrinsic (host age) and extrinsic (herd size and management system) factors influencing the dynamics of Eimeria spp. found in calves from CE Poland. Fecal samples were collected from 356 calves from different types of management systems and from different herd sizes. Flotation and McMaster method were used for parasitological investigation. Oocysts were differentiated on the basis of morphological criteria. Eight Eimeria species were identified and mean species richness (MSR) was significantly affected by host age. The highest MSR was noted for middle age animals. There was an association between species, with a highly significant co-occurrence of Eimeria bovis with Eimeria zuernii. The presence of E. bovis significantly increased the percentage of individuals carrying E. zuernii. The presence of E. bovis significantly increased the percentage of individuals carrying Eimeria canadensis. The overall prevalence of Eimeria spp. reached 52.8% and was significantly affected by the age of cows, with the highest prevalence in animals between 5-10 months old. The most prevalent species were E. bovis (37.4%), E. zuernii (19.9%) and E. canadensis (12.1%). The prevalence of E. bovis was affected by host age (the highest prevalence in age class 2 animals) and management type (the highest prevalence in individuals raised in groups). The prevalence of E. zuernii was affected by age (the lowest prevalence was noted in the oldest individuals) and herd size (individuals infected were present only in the middle and large size herds), whereas the prevalence of E. canadensis was affected by all three factors. Overall, mean OPG of the combined Eimeria spp. was 458.84 (37.93) and differed significantly between age classes. Mean OPGs were generally low for young and mature animals but high for middle age class animals. There was no significant influence of extrinsic factors on OPG. Taking into consideration the presented results, it is necessary to underline the role of intrinsic and extrinsic factors affecting the prevalence and abundance of Eimeria spp. in calves. Understanding the dynamics of Eimeria infections in calves may help to overcome this most common bovine parasite. Copyright © 2015 Elsevier B.V. All rights reserved.

Sizing ocean giants: patterns of intraspecific size variation in marine megafauna

PubMed Central

Balk, Meghan A.; Benfield, Mark C.; Branch, Trevor A.; Chen, Catherine; Cosgrove, James; Dove, Alistair D.M.; Gaskins, Lindsay C.; Helm, Rebecca R.; Hochberg, Frederick G.; Lee, Frank B.; Marshall, Andrea; McMurray, Steven E.; Schanche, Caroline; Stone, Shane N.; Thaler, Andrew D.

2015-01-01

What are the greatest sizes that the largest marine megafauna obtain? This is a simple question with a difficult and complex answer. Many of the largest-sized species occur in the world’s oceans. For many of these, rarity, remoteness, and quite simply the logistics of measuring these giants has made obtaining accurate size measurements difficult. Inaccurate reports of maximum sizes run rampant through the scientific literature and popular media. Moreover, how intraspecific variation in the body sizes of these animals relates to sex, population structure, the environment, and interactions with humans remains underappreciated. Here, we review and analyze body size for 25 ocean giants ranging across the animal kingdom. For each taxon we document body size for the largest known marine species of several clades. We also analyze intraspecific variation and identify the largest known individuals for each species. Where data allows, we analyze spatial and temporal intraspecific size variation. We also provide allometric scaling equations between different size measurements as resources to other researchers. In some cases, the lack of data prevents us from fully examining these topics and instead we specifically highlight these deficiencies and the barriers that exist for data collection. Overall, we found considerable variability in intraspecific size distributions from strongly left- to strongly right-skewed. We provide several allometric equations that allow for estimation of total lengths and weights from more easily obtained measurements. In several cases, we also quantify considerable geographic variation and decreases in size likely attributed to humans. PMID:25649000

Some Considerations on the Dynamics of Nanometric Suspensions in Fluid Media

NASA Astrophysics Data System (ADS)

Lungu, Mihai; Neculae, Adrian; Bunoiu, Madalin

2009-05-01

Nano-sized particles received considerable interest in the last decade. The manipulation of nanoparticles is becoming an important issue as they are more and more produced as a result of material synthesis and combustion emission. The nanometric particles represent a very important threat for human health because they can readily enter the human body through inhalation and their toxicity is relatively high due to the large specific surface area. The separation of the nano-sized particles into distinct bands, spatially separated one of each other had also brought recently considerable attention in many scientific areas; the usages of nanoparticles are very promising for the new technologies. The behavior of a suspension of sub-micronic particles under the action of dielectrophoretic force is numerically investigated and a theoretical model is proposed.

Commercial truck crash injury severity analysis using gradient boosting data mining model.

PubMed

Zheng, Zijian; Lu, Pan; Lantz, Brenda

2018-06-01

Truck crashes contribute to a large number of injuries and fatalities. This study seeks to identify the contributing factors affecting truck crash severity using 2010 to 2016 North Dakota and Colorado crash data provided by the Federal Motor Carrier Safety Administration. To fulfill a gap of previous studies, broad considerations of company and driver characteristics, such as company size and driver's license class, along with vehicle types and crash characteristics are researched. Gradient boosting, a data mining technique, is applied to comprehensively analyze the relationship between crash severities and a set of heterogeneous risk factors. Twenty five variables were tested and 22 of them are identified as significant variables contributing to injury severities, however, top 11 variables account for more than 80% of injury forecasting. The relative variable importance analysis is conducted and furthermore marginal effects of all contributing factors are also illustrated in this research. Several factors such as trucking company attributes (e.g., company size), safety inspection values, trucking company commerce status (e.g., interstate or intrastate), time of day, driver's age, first harmful events, and registration condition are found to be significantly associated with crash injury severity. Even though most of the identified contributing factors are significant for all four levels of crash severity, their relative importance and marginal effect are all different. For the first time, trucking company and driver characteristics are proved to have significant impact on truck crash injury severity. Some of the results in this study reinforce previous studies' conclusions. Findings in this study can be helpful for transportation agencies to reduce injury severity, and develop efficient strategies to improve safety. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.

Population-Based Resequencing of Experimentally Evolved Populations Reveals the Genetic Basis of Body Size Variation in Drosophila melanogaster

PubMed Central

Turner, Thomas L.; Stewart, Andrew D.; Fields, Andrew T.; Rice, William R.; Tarone, Aaron M.

2011-01-01

Body size is a classic quantitative trait with evolutionarily significant variation within many species. Locating the alleles responsible for this variation would help understand the maintenance of variation in body size in particular, as well as quantitative traits in general. However, successful genome-wide association of genotype and phenotype may require very large sample sizes if alleles have low population frequencies or modest effects. As a complementary approach, we propose that population-based resequencing of experimentally evolved populations allows for considerable power to map functional variation. Here, we use this technique to investigate the genetic basis of natural variation in body size in Drosophila melanogaster. Significant differentiation of hundreds of loci in replicate selection populations supports the hypothesis that the genetic basis of body size variation is very polygenic in D. melanogaster. Significantly differentiated variants are limited to single genes at some loci, allowing precise hypotheses to be formed regarding causal polymorphisms, while other significant regions are large and contain many genes. By using significantly associated polymorphisms as a priori candidates in follow-up studies, these data are expected to provide considerable power to determine the genetic basis of natural variation in body size. PMID:21437274

Spaceflight Human System Standards

NASA Technical Reports Server (NTRS)

Holubec, Keith; Tillman, Barry; Connolly, Jan

2009-01-01

NASA created a new approach for human system integration and human performance standards. NASA created two documents a standard and a reference handbook. The standard is titled NASA Space Flight Human-System Standard (SFHSS) and consists of two-volumes: Volume 1- Crew Health This volume covers standards needed to support astronaut health (medical care, nutrition, sleep, exercise, etc.) Volume 2 Human Factors, Habitability and Environmental Health This volume covers the standards for system design that will maintain astronaut performance (ie., environmental factors, design of facilities, layout of workstations, and lighting requirements). It includes classic human factors requirements. The new standards document is written in terms so that it is applicable to a broad range of present and future NASA systems. The document states that all new programs prepare system-specific requirements that will meet the general standards. For example, the new standard does not specify a design should accommodate specific percentiles of a defined population. Rather, NASA-STD-3001, Volume 2 states that all programs shall prepare program-specific requirements that define the user population and their size ranges. The design shall then accommodate the full size range of those users. The companion reference handbook, Human Integration Design Handbook (HIDH), was developed to capture the design consideration information from NASA-STD-3000, and adds spaceflight lessons learned, gaps in knowledge, example solutions, and suggests research to further mature specific disciplines. The HIDH serves two major purposes: HIDH is the reference document for writing human factors requirements for specific systems. HIDH contains design guidance information that helps insure that designers create systems which safely and effectively accommodate the capabilities and limitations of space flight crews.

The Effect of Different Non-Metallic Inclusions on the Machinability of Steels

PubMed Central

Ånmark, Niclas; Karasev, Andrey; Jönsson, Pär Göran

2015-01-01

Considerable research has been conducted over recent decades on the role of non-metallic inclusions and their link to the machinability of different steels. The present work reviews the mechanisms of steel fractures during different mechanical machining operations and the behavior of various non-metallic inclusions in a cutting zone. More specifically, the effects of composition, size, number and morphology of inclusions on machinability factors (such as cutting tool wear, power consumption, etc.) are discussed and summarized. Finally, some methods for modification of non-metallic inclusions in the liquid steel are considered to obtain a desired balance between mechanical properties and machinability of various steel grades. PMID:28787969

On the correlation of plume centerline velocity decay of turbulent acoustically excited jets

NASA Technical Reports Server (NTRS)

Vonglahn, Uwe H.

1987-01-01

Acoustic excitation was shown to alter the velocity decay and spreading characteristics of jet plumes by modifying the large-scale structures in the plume shear layer. The present work consists of reviewing and analyzing available published and unpublished experimental data in order to determine the importance and magnitude of the several variables that contribute to plume modification by acoustic excitation. Included in the study were consideration of the effects of internal and external acoustic excitation, excitation Strouhal number, acoustic excitation level, nozzle size, and flow conditions. The last include jet Mach number and jet temperature. The effects of these factors on the plume centerline velocity decay are then summarized in an overall empirical correlation.

Choosing a radiology workstation: technical and clinical considerations.

PubMed

Krupinski, Elizabeth A; Kallergi, Maria

2007-03-01

Choosing a workstation for daily use in the interpretation of digital radiologic images can be a daunting task. There are numerous products available on the market, but differentiating among them and deciding on what is best for a particular environment can be confusing and frustrating. There is no "one-size-fits-all" workstation, so users must consider a variety of factors when choosing a workstation. This review summarizes the critical elements in a radiology workstation and the characteristics one should be aware of and look for in the selection of a workstation. Issues pertaining to both hardware and software aspects of medical workstations, including interface design, are reviewed, particularly as they may affect the interpretation process. (c) RSNA, 2007.

Microwave Tissue Ablation: Biophysics, Technology and Applications

PubMed Central

2010-01-01

Microwave ablation is an emerging treatment option for many cancers, cardiac arrhythmias and other medical conditions. During treatment, microwaves are applied directly to tissues to produce rapid temperature elevations sufficient to produce immediate coagulative necrosis. The engineering design criteria for each application differ, with individual consideration for factors such as desired ablation zone size, treatment duration, and procedural invasiveness. Recent technological developments in applicator cooling, power control and system optimization for specific applications promise to increase the utilization of microwave ablation in the future. This article will review the basic biophysics of microwave tissue heating, provide an overview of the design and operation of current equipment, and outline areas for future research for microwave ablation. PMID:21175404

Analysis of survival data from telemetry projects

USGS Publications Warehouse

Bunck, C.M.; Winterstein, S.R.; Pollock, K.H.

1985-01-01

Telemetry techniques can be used to study the survival rates of animal populations and are particularly suitable for species or settings for which band recovery models are not. Statistical methods for estimating survival rates and parameters of survival distributions from observations of radio-tagged animals will be described. These methods have been applied to medical and engineering studies and to the study of nest success. Estimates and tests based on discrete models, originally introduced by Mayfield, and on continuous models, both parametric and nonparametric, will be described. Generalizations, including staggered entry of subjects into the study and identification of mortality factors will be considered. Additional discussion topics will include sample size considerations, relocation frequency for subjects, and use of covariates.

Anthropometric survey of young swimmers.

PubMed

Helmuth, H S

1980-05-01

A survey of body dimensions and body composition of male (n = 39) and female (n = 54) swimmers aged 8--16 was conducted in order to determine if any differences exist when compared to their ordinary North American age-peers; to see how a vigorous exercise influences their bodily factors and to probe into the problem of a relationship between body size, structure and composition with swimming speed. Swimmers were consistently found to be taller, heavier and broader in their shoulders than ordinary same-age youths. A considerable decrease in skinfold thickness among boys, but not girls, was observed after 6 months of arduous swimming practice, due probably to sexual dimorphism in the response to workload or caused by initial differences in skinfold thickness. Even at the moderate level of exercise and the young age of swimmers, speed, as measured by 100m free-style times, was found to be positively correlated with shoulder width, chest circumference, hand and foot size and fat-free weight.

Optimization of BI test parameters to investigate mechanical properties of Grade 92 steel

NASA Astrophysics Data System (ADS)

Barbadikar, Dipika R.; Vincent, S.; Ballal, Atul R.; Peshwe, Dilip R.; Mathew, M. D.

2018-04-01

The ball indentation (BI) testing is used to evaluate the tensile properties of materials namely yield strength, strength coefficient, ultimate tensile strength, and strain hardening exponent. The properties evaluated depend on a number of BI test parameters. These parameters include the material constants like yield slope (YS), constraint factor (CF), yield offset parameter (YOP). Number of loading/unloading cycles, preload, indenter size and depth of penetration of indenter also affects the properties. In present investigation the effect of these parameters on the stress-strain curve of normalized and tempered Grade 92 steel is evaluated. Grade 92 is a candidate material for power plant application over austenitic stainless steel and derives its strength from M23C6, MX precipitates and high dislocation density. CF, YS and YOP changed the strength properties considerably. Indenter size effect resulted in higher strength for smaller indenter. It is suggested to use larger indenter diameter and higher number of loading cycles for GRADE 92 steel to get best results using BI technique.

Analysis of the interplay among charge, hydration and shape of proteins through the modeling of their CZE mobility data.

PubMed

Piaggio, Maria V; Peirotti, Marta B; Deiber, Julio A

2009-07-01

Electrophoretic mobility data of four proteins are analyzed and interpreted through a physicochemical CZE model, which provides estimates of quantities like equivalent hydrodynamic radius (size), effective charge number, shape orientation factor, hydration, actual pK values of ionizing groups, and pH near molecule, among others. Protein friction coefficients are simulated through the creeping flow theory of prolate spheroidal particles. The modeling of the effective electrophoretic mobility of proteins requires consideration of hydrodynamic size and shape coupled to hydration and effective charge. The model proposed predicts native protein hydration within the range of values obtained experimentally from other techniques. Therefore, this model provides consistently other physicochemical properties such as average friction and diffusion coefficients and packing fractal dimension. As the pH varies from native conditions to those that are denaturing the protein, hydration and packing fractal dimension change substantially. Needs for further research are also discussed and proposed.

From individuals to populations to communities: a dynamic energy budget model of marine ecosystem size-spectrum including life history diversity.

PubMed

Maury, Olivier; Poggiale, Jean-Christophe

2013-05-07

Individual metabolism, predator-prey relationships, and the role of biodiversity are major factors underlying the dynamics of food webs and their response to environmental variability. Despite their crucial, complementary and interacting influences, they are usually not considered simultaneously in current marine ecosystem models. In an attempt to fill this gap and determine if these factors and their interaction are sufficient to allow realistic community structure and dynamics to emerge, we formulate a mathematical model of the size-structured dynamics of marine communities which integrates mechanistically individual, population and community levels. The model represents the transfer of energy generated in both time and size by an infinite number of interacting fish species spanning from very small to very large species. It is based on standard individual level assumptions of the Dynamic Energy Budget theory (DEB) as well as important ecological processes such as opportunistic size-based predation and competition for food. Resting on the inter-specific body-size scaling relationships of the DEB theory, the diversity of life-history traits (i.e. biodiversity) is explicitly integrated. The stationary solutions of the model as well as the transient solutions arising when environmental signals (e.g. variability of primary production and temperature) propagate through the ecosystem are studied using numerical simulations. It is shown that in the absence of density-dependent feedback processes, the model exhibits unstable oscillations. Density-dependent schooling probability and schooling-dependent predatory and disease mortalities are proposed to be important stabilizing factors allowing stationary solutions to be reached. At the community level, the shape and slope of the obtained quasi-linear stationary spectrum matches well with empirical studies. When oscillations of primary production are simulated, the model predicts that the variability propagates along the spectrum in a given frequency-dependent size range before decreasing for larger sizes. At the species level, the simulations show that small and large species dominate the community successively (small species being more abundant at small sizes and large species being more abundant at large sizes) and that the total biomass of a species decreases with its maximal size which again corroborates empirical studies. Our results indicate that the simultaneous consideration of individual growth and reproduction, size-structured trophic interactions, the diversity of life-history traits and a density-dependent stabilizing process allow realistic community structure and dynamics to emerge without any arbitrary prescription. As a logical consequence of our model construction and a basis for future studies, we define the function Φ as the relative contribution of each species to the total biomass of the ecosystem, for any given size. We argue that this function is a measure of the functional role of biodiversity characterizing the impact of the structure of the community (its species composition) on its function (the relative proportions of losses, dissipation and biological work). Copyright © 2013 Elsevier Ltd. All rights reserved.

Design flow factors for sewerage systems in small arid communities.

PubMed

Imam, Emad H; Elnakar, Haitham Y

2014-09-01

Reliable estimation of sewage flow rates is essential for the proper design of sewers, pumping stations, and treatment plants. The design of the various components of the sewerage system should be based on the most critical flow rates with a focus on extremely low and peak flow rates that would be sustained for a duration related to the acceptable limits of behavior of the components under consideration. The extreme flow conditions and to what extent they differ from the average values are closely related to the size of the community or network, and the socioeconomic conditions. A single pumping station is usually sufficient to pump flow from small community in either flat or non-undulating topography. Therefore, the hydraulic loading on the wastewater treatment plant (WWTP) results from the pumped flow from the pumping station rather than the trunk sewer flow. The intermittent operation of the pumping units further accentuates the sewage hydrograph in the final trunk sewer. Accordingly, the design flow for the various components of the WWTP should be determined based on their relevant flow factors. In this study, analysis of one representative small community out of five monitored small communities in Egypt and the Kingdom of Saudi Arabia is presented. Pumped sewage flow rates were measured and the sewer incoming flows were hydraulically derived. The hourly and daily sewer and pumped flow records were analyzed to derive the relationship between the flow factors that would be sustained for various durations (instantaneously, 1 h, 2 h, etc.) and their probability of non-exceedance. The resulting peaking factors with a consideration for their sustained flow duration and specified probability would permit the design of the various components of the treatment plant using more accurate critical flows.

Design flow factors for sewerage systems in small arid communities

PubMed Central

Imam, Emad H.; Elnakar, Haitham Y.

2013-01-01

Reliable estimation of sewage flow rates is essential for the proper design of sewers, pumping stations, and treatment plants. The design of the various components of the sewerage system should be based on the most critical flow rates with a focus on extremely low and peak flow rates that would be sustained for a duration related to the acceptable limits of behavior of the components under consideration. The extreme flow conditions and to what extent they differ from the average values are closely related to the size of the community or network, and the socioeconomic conditions. A single pumping station is usually sufficient to pump flow from small community in either flat or non-undulating topography. Therefore, the hydraulic loading on the wastewater treatment plant (WWTP) results from the pumped flow from the pumping station rather than the trunk sewer flow. The intermittent operation of the pumping units further accentuates the sewage hydrograph in the final trunk sewer. Accordingly, the design flow for the various components of the WWTP should be determined based on their relevant flow factors. In this study, analysis of one representative small community out of five monitored small communities in Egypt and the Kingdom of Saudi Arabia is presented. Pumped sewage flow rates were measured and the sewer incoming flows were hydraulically derived. The hourly and daily sewer and pumped flow records were analyzed to derive the relationship between the flow factors that would be sustained for various durations (instantaneously, 1 h, 2 h, etc.) and their probability of non-exceedance. The resulting peaking factors with a consideration for their sustained flow duration and specified probability would permit the design of the various components of the treatment plant using more accurate critical flows. PMID:25685521

How to Buy School Seating.

ERIC Educational Resources Information Center

Summerville, D.G.

1966-01-01

An expert tells what kind of furniture you need for the different rooms in your schools. Suggestions are made separately for both elementary and secondary classrooms emphasizing consideration for the student. General considerations are listed regarding durability, floor protection, storage, chair leg finish, wooden vs. fiberglass, size, and…

Intergenerational determinants of offspring size at birth: a life course and graphical analysis using the Aberdeen Children of the 1950s Study (ACONF).

PubMed

Morton, Susan M B; De Stavola, Bianca L; Leon, David A

2014-06-01

Size at birth has taken on renewed significance due to its now well-established association with many health and health-related outcomes in both the immediate perinatal period and across the entire life course. Optimizing fetal growth to improve both neonatal survival and population health is the focus of much research and policy development, although most efforts have concentrated on either the period of pregnancy itself or the period immediately preceding it. Intergenerational data linked to the Aberdeen Children of the 1950s (ACONF) study were used to examine the influence of grandparental and parental life course biological and social variables on the distribution of offspring size at birth. Guided stepwise multivariable methods and a graphical approach were used to assess the relative importance of these temporally ordered and highly correlated life course measures. Both distal and proximal grandparental and parental life course biological and social factors predicted offspring size at birth. Inequalities in size at birth, according to adult maternal socioeconomic indicators, were found to be largely generated by the continuity of the social environment across generations, and the inequalities in maternal early life growth were predicted by the adult grandparental social environment during the mother's early life. Mother's own size at birth predicted her offspring's intrauterine growth, independent of her adult biological and social characteristics. A mother's childhood social environment and her early growth are both important predictors of her offspring's size at birth. Population strategies aimed at optimizing size at birth require broader social and intergenerational considerations, in addition to focusing on the health of mothers in the immediate pregnancy period. © The Author 2014; all rights reserved. Published by Oxford University Press on behalf of the International Epidemiological Association.

Sexual dimorphism and feeding ecology of Diamond-backed Terrapins (Malaclemys terrapin)

USGS Publications Warehouse

Underwood, Elizabeth B.; Bowers, Sarah; Guzy, Jacquelyn C.; Lovich, Jeffrey E.; Taylor, Carole A.; Gibbons, J. Whitfield; Dorcas, Michael E.

2013-01-01

Natural and sexual selection are frequently invoked as causes of sexual size dimorphism in animals. Many species of turtles, including the Diamond-backed Terrapin (Malaclemys terrapin), exhibit sexual dimorphism in body size, possibly enabling the sexes to exploit different resources and reduce intraspecific competition. Female terrapins not only have larger body sizes but also disproportionately larger skulls and jaws relative to males. To better understand the relationship between skull morphology and terrapin feeding ecology, we measured the in-lever to out-lever ratios of 27 male and 33 female terrapin jaws to evaluate biomechanics of the trophic apparatus. In addition, we measured prey handling times by feeding Fiddler Crabs (Uca pugnax), a natural prey item, to 24 terrapins in the laboratory. Our results indicate that although females have disproportionately larger heads, they have similar in:out lever ratios to males, suggesting that differences in adductor muscle mass are more important in determining bite force than jaw in:out lever ratios. Females also had considerably reduced prey handling times. Understanding the factors affecting terrapin feeding ecology can illuminate the potential roles male and female terrapins play as top-down predators that regulate grazing of Periwinkle Snails (Littorina irrorata) on Cord Grass (Spartina alterniflora).

Triboelectric charging of volcanic ash from the 2011 Grímsvötn eruption.

PubMed

Houghton, Isobel M P; Aplin, Karen L; Nicoll, Keri A

2013-09-13

The plume from the 2011 eruption of Grímsvötn was highly electrically charged, as shown by the considerable lightning activity measured by the United Kingdom Met Office's low-frequency lightning detection network. Previous measurements of volcanic plumes have shown that ash particles are electrically charged up to hundreds of kilometers away from the vent, which indicates that the ash continues to charge in the plume [R. G. Harrison, K. A. Nicoll, Z. Ulanowski, and T. A. Mather, Environ. Res. Lett. 5, 024004 (2010); H. Hatakeyama J. Meteorol. Soc. Jpn. 27, 372 (1949)]. In this Letter, we study triboelectric charging of different size fractions of a sample of volcanic ash experimentally. Consistently with previous work, we find that the particle size distribution is a determining factor in the charging. Specifically, our laboratory experiments demonstrate that the normalized span of the particle size distribution plays an important role in the magnitude of charging generated. The influence of the normalized span on plume charging suggests that all ash plumes are likely to be charged, with implications for remote sensing and plume lifetime through scavenging effects.

A Study towards Building An Optimal Graph Theory Based Model For The Design of Tourism Website

NASA Astrophysics Data System (ADS)

Panigrahi, Goutam; Das, Anirban; Basu, Kajla

2010-10-01

Effective tourism website is a key to attract tourists from different parts of the world. Here we identify the factors of improving the effectiveness of website by considering it as a graph, where web pages including homepage are the nodes and hyperlinks are the edges between the nodes. In this model, the design constraints for building a tourism website are taken into consideration. Our objectives are to build a framework of an effective tourism website providing adequate level of information, service and also to enable the users to reach to the desired page by spending minimal loading time. In this paper an information hierarchy specifying the upper limit of outgoing link of a page has also been proposed. Following the hierarchy, the web developer can prepare an effective tourism website. Here loading time depends on page size and network traffic. We have assumed network traffic as uniform and the loading time is directly proportional with page size. This approach is done by quantifying the link structure of a tourism website. In this approach we also propose a page size distribution pattern of a tourism website.

The Effects of Fracture Origin Size on Fatigue Properties of Ductile Cast Iron with Small Chill Structures

NASA Astrophysics Data System (ADS)

Sameshima, Daigo; Nakamura, Takashi; Horikawa, Noritaka; Oguma, Hiroyuki; Endo, Takeshi

Reducing the weight of a machine structure is an increasingly important consideration both for the conservation of resources during production and for the energy saving during operation. With these objectives in mind, thin-walled ductile cast iron has recently been developed. Because rapid cooling could result in brittle microstructure of cementite (chill) in this cast iron, it is necessary to investigate the effect of cementite on the fatigue properties. Therefore, fatigue tests were carried out on a ductile cast iron of block castings which contained a relatively small amount of cementite. Fracture surface observation indicated that the fracture origins were located at graphite clusters and cast shrinkage porosity, not at cementite. It appears that when the size of the cementite is smaller than that of the graphite, the cementite does not affect the fatigue properties of ductile cast iron. Not surprisingly, the fatigue lives were found to increase with decrease in the size of the fatigue fracture origin. The threshold initial stress intensity factor range ΔKini,th for fatigue failure was found to be about 3-4MPa√m, independent of microstructure.

Triboelectric Charging of Volcanic Ash from the 2011 Grímsvötn Eruption

NASA Astrophysics Data System (ADS)

Houghton, Isobel M. P.; Aplin, Karen L.; Nicoll, Keri A.

2013-09-01

The plume from the 2011 eruption of Grímsvötn was highly electrically charged, as shown by the considerable lightning activity measured by the United Kingdom Met Office’s low-frequency lightning detection network. Previous measurements of volcanic plumes have shown that ash particles are electrically charged up to hundreds of kilometers away from the vent, which indicates that the ash continues to charge in the plume [R. G. Harrison, K. A. Nicoll, Z. Ulanowski, and T. A. Mather, Environ. Res. Lett. 5, 024004 (2010)1748-932610.1088/1748-9326/5/2/024004; H. Hatakeyama J. Meteorol. Soc. Jpn. 27, 372 (1949)JMSJAU0026-1165]. In this Letter, we study triboelectric charging of different size fractions of a sample of volcanic ash experimentally. Consistently with previous work, we find that the particle size distribution is a determining factor in the charging. Specifically, our laboratory experiments demonstrate that the normalized span of the particle size distribution plays an important role in the magnitude of charging generated. The influence of the normalized span on plume charging suggests that all ash plumes are likely to be charged, with implications for remote sensing and plume lifetime through scavenging effects.

Forest Fuels Management in Europe

Treesearch

Gavriil Xanthopoulos; David Caballero; Miguel Galante; Daniel Alexandrian; Eric Rigolot; Raffaella Marzano

2006-01-01

Current fuel management practices vary considerably between European countries. Topography, forest and forest fuel characteristics, size and compartmentalization of forests, forest management practices, land uses, land ownership, size of properties, legislation, and, of course, tradition, are reasons for these differences.Firebreak construction,...

Application of geographically-weighted regression analysis to assess risk factors for malaria hotspots in Keur Soce health and demographic surveillance site.

PubMed

Ndiath, Mansour M; Cisse, Badara; Ndiaye, Jean Louis; Gomis, Jules F; Bathiery, Ousmane; Dia, Anta Tal; Gaye, Oumar; Faye, Babacar

2015-11-18

In Senegal, considerable efforts have been made to reduce malaria morbidity and mortality during the last decade. This resulted in a marked decrease of malaria cases. With the decline of malaria cases, transmission has become sparse in most Senegalese health districts. This study investigated malaria hotspots in Keur Soce sites by using geographically-weighted regression. Because of the occurrence of hotspots, spatial modelling of malaria cases could have a considerable effect in disease surveillance. This study explored and analysed the spatial relationships between malaria occurrence and socio-economic and environmental factors in small communities in Keur Soce, Senegal, using 6 months passive surveillance. Geographically-weighted regression was used to explore the spatial variability of relationships between malaria incidence or persistence and the selected socio-economic, and human predictors. A model comparison of between ordinary least square and geographically-weighted regression was also explored. Vector dataset (spatial) of the study area by village levels and statistical data (non-spatial) on malaria confirmed cases, socio-economic status (bed net use), population data (size of the household) and environmental factors (temperature, rain fall) were used in this exploratory analysis. ArcMap 10.2 and Stata 11 were used to perform malaria hotspots analysis. From Jun to December, a total of 408 confirmed malaria cases were notified. The explanatory variables-household size, housing materials, sleeping rooms, sheep and distance to breeding site returned significant t values of -0.25, 2.3, 4.39, 1.25 and 2.36, respectively. The OLS global model revealed that it explained about 70 % (adjusted R(2) = 0.70) of the variation in malaria occurrence with AIC = 756.23. The geographically-weighted regression of malaria hotspots resulted in coefficient intercept ranging from 1.89 to 6.22 with a median of 3.5. Large positive values are distributed mainly in the southeast of the district where hotspots are more accurate while low values are mainly found in the centre and in the north. Geographically-weighted regression and OLS showed important risks factors of malaria hotspots in Keur Soce. The outputs of such models can be a useful tool to understand occurrence of malaria hotspots in Senegal. An understanding of geographical variation and determination of the core areas of the disease may provide an explanation regarding possible proximal and distal contributors to malaria elimination in Senegal.

Environmental, biological and anthropogenic effects on grizzly bear body size: temporal and spatial considerations.

PubMed

Nielsen, Scott E; Cattet, Marc R L; Boulanger, John; Cranston, Jerome; McDermid, Greg J; Shafer, Aaron B A; Stenhouse, Gordon B

2013-09-08

Individual body growth is controlled in large part by the spatial and temporal heterogeneity of, and competition for, resources. Grizzly bears (Ursus arctos L.) are an excellent species for studying the effects of resource heterogeneity and maternal effects (i.e. silver spoon) on life history traits such as body size because their habitats are highly variable in space and time. Here, we evaluated influences on body size of grizzly bears in Alberta, Canada by testing six factors that accounted for spatial and temporal heterogeneity in environments during maternal, natal and 'capture' (recent) environments. After accounting for intrinsic biological factors (age, sex), we examined how body size, measured in mass, length and body condition, was influenced by: (a) population density; (b) regional habitat productivity; (c) inter-annual variability in productivity (including silver spoon effects); (d) local habitat quality; (e) human footprint (disturbances); and (f) landscape change. We found sex and age explained the most variance in body mass, condition and length (R(2) from 0.48-0.64). Inter-annual variability in climate the year before and of birth (silver spoon effects) had detectable effects on the three-body size metrics (R(2) from 0.04-0.07); both maternal (year before birth) and natal (year of birth) effects of precipitation and temperature were related with body size. Local heterogeneity in habitat quality also explained variance in body mass and condition (R(2) from 0.01-0.08), while annual rate of landscape change explained additional variance in body length (R(2) of 0.03). Human footprint and population density had no observed effect on body size. These results illustrated that body size patterns of grizzly bears, while largely affected by basic biological characteristics (age and sex), were also influenced by regional environmental gradients the year before, and of, the individual's birth thus illustrating silver spoon effects. The magnitude of the silver spoon effects was on par with the influence of contemporary regional habitat productivity, which showed that both temporal and spatial influences explain in part body size patterns in grizzly bears. Because smaller bears were found in colder and less-productive environments, we hypothesize that warming global temperatures may positively affect body mass of interior bears.

Cardiovascular Health Awareness Program (CHAP): a community cluster-randomised trial among elderly Canadians.

PubMed

Kaczorowski, Janusz; Chambers, Larry W; Karwalajtys, Tina; Dolovich, Lisa; Farrell, Barbara; McDonough, Beatrice; Sebaldt, Rolf; Levitt, Cheryl; Hogg, William; Thabane, Lehana; Tu, Karen; Goeree, Ron; Paterson, J Michael; Shubair, Mamdouh; Gierman, Tracy; Sullivan, Shannon; Carter, Megan

2008-06-01

High blood pressure is an important and modifiable cardiovascular disease risk factor that remains under-detected and under-treated. Community-level interventions that address high blood pressure and other modifiable risk factors are a promising strategy to improve cardiovascular health in populations. The present study is a community cluster-randomised trial testing the effectiveness of CHAP (Cardiovascular Health Awareness Program) on the cardiovascular health of older adults. Thirty-nine mid-sized communities in Ontario, Canada were stratified by geographic location and size of the population aged >or=65 years and randomly allocated to receive CHAP or no intervention. In CHAP communities, residents aged >or=65 years were invited to attend cardiovascular risk assessment sessions held in pharmacies over 10 weeks in Fall, 2006. Sessions included blood pressure measurement and feedback to family physicians. Trained volunteers delivered the program with support from pharmacists, community nurses and local organisations. The primary outcome measure is the relative change in the mean annual rate of hospital admission for acute myocardial infarction, congestive heart failure and stroke (composite end-point) among residents aged >or=65 years in intervention and control communities, using routinely collected, population-based administrative health data. This paper highlights considerations in design, implementation and evaluation of a large-scale, community-wide cardiovascular health promotion initiative.

Comparison of four staging systems of lymph node metastasis in gastric cancer.

PubMed

Zhang, Ming; Zhu, Guanyu; Ma, Yan; Xue, Yingwei

2009-11-01

The classification of lymph node metastasis in patients with gastric cancer is still controversial. Our aim was to evaluate the relative merits of four staging systems of lymph node metastasis. In our study, the nodal status was classified according to the 5th edition of the tumor node metastasis (TNM) system, the Japanese Classification of Gastric Carcinoma (JCGC), the ratio of metastatic lymph nodes, and the size of the largest metastatic lymph node. Each staging system was scored as good (+2), fair (+1), or poor (0) with respect to the theoretical value (extent of the anatomical lymphatic tumor spread), convenience (simplicity), surgical applicability (extent of lymph node dissection), and prognostic value (ability to predict survival rate). In the multivariate analysis including the four staging systems and other potential prognostic factors, stepwise Cox regression revealed that the ratio of metastatic lymph nodes was the most independent prognostic factor. The TNM, ratio, and size systems were convenient because they had no consideration for the location of the tumor and lymph node. Although the JCGC system had advantages in theoretical value and surgical application, it was most optional due to the complexity of the system. Although all different staging systems are comparable, the metastatic lymph node ratio system is convenient, reproducible, and has the highest ability to predict survival.

Drivers of protogynous sex change differ across spatial scales.

PubMed

Taylor, Brett M

2014-01-22

The influence of social demography on sex change schedules in protogynous reef fishes is well established, yet effects across spatial scales (in particular, the magnitude of natural variation relative to size-selective fishing effects) are poorly understood. Here, I examine variation in timing of sex change for exploited parrotfishes across a range of environmental, anthropogenic and geographical factors. Results were highly dependent on spatial scale. Fishing pressure was the most influential factor determining length at sex change at the within-island scale where a wide range of anthropogenic pressure existed. Sex transition occurred at smaller sizes where fishing pressure was high. Among islands, however, differences were overwhelmingly predicted by reefal-scale structural features, a pattern evident for all species examined. For the most abundant species, Chlorurus spilurus, length at sex change increased at higher overall densities and greater female-to-male sex ratios at all islands except where targeted by fishermen; here the trend was reversed. This implies differing selective pressures on adult individuals can significantly alter sex change dynamics, highlighting the importance of social structure, demography and the selective forces structuring populations. Considerable life-history responses to exploitation were observed, but results suggest potential fishing effects on demography may be obscured by natural variation at biogeographic scales.

Understanding the Delamination Risk of a Trilayer Tablet Using Minipiloting Tools.

PubMed

Tao, Jing; Robertson-Lavalle, Sophia; Pandey, Preetanshu; Badawy, Sherif

2017-11-01

A multilayer tablet is one of the formulation options used to mitigate chemical and physical incompatibility between different drug substances. Feasibility studies of multilayer tablets are often conducted using round flat-faced punch tooling. However, the link between different tooling designs and multilayer tablet performance is not well established. This study uses a prototype trilayer tablet and examines tooling design considerations when conducting small-scale studies to gauge the risk of interfacial defects. The impact of tablet weight and dimensions was evaluated to gain understanding of the effect of scale-up/down of tablet size. The factors in tooling selection, including tablet shape, cup depth, and size of embossing were evaluated to gain insight on the impact of tooling design on the interfacial strength of the trilayer tablet. It was found that tablet weight and dimensions can significantly affect the interfacial strength due to their impact on force transmission during compression and the retardation force from the die wall during ejection. Round flat-faced tooling generated trilayer tablets of the strongest interfacial strength compared to typical commercial tablets-oval shaped with concave surfaces. These factors should be accounted for when using round flat compacts to assess the interface risks of a multilayer tablet. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Critchlow, Terence J.; Abdulla, Ghaleb; Becla, Jacek

Data management is the organization of information to support efficient access and analysis. For data intensive computing applications, the speed at which relevant data can be accessed is a limiting factor in terms of the size and complexity of computation that can be performed. Data access speed is impacted by the size of the relevant subset of the data, the complexity of the query used to define it, and the layout of the data relative to the query. As the underlying data sets become increasingly complex, the questions asked of it become more involved as well. For example, geospatial datamore » associated with a city is no longer limited to the map data representing its streets, but now also includes layers identifying utility lines, key points, locations and types of businesses within the city limits, tax information for each land parcel, satellite imagery, and possibly even street-level views. As a result, queries have gone from simple questions, such as "how long is Main Street?", to much more complex questions such as "taking all other factors into consideration, are the property values of houses near parks higher than those under power lines, and if so, by what percentage". Answering these questions requires a coherent infrastructure, integrating the relevant data into a format optimized for the questions being asked.« less

Inbreeding depression in an insect with maternal care: influences of family interactions, life stage and offspring sex.

PubMed

Meunier, J; Kölliker, M

2013-10-01

Although inbreeding is commonly known to depress individual fitness, the severity of inbreeding depression varies considerably across species. Among the factors contributing to this variation, family interactions, life stage and sex of offspring have been proposed, but their joint influence on inbreeding depression remains poorly understood. Here, we demonstrate that these three factors jointly shape inbreeding depression in the European earwig, Forficula auricularia. Using a series of cross-breeding, split-clutch and brood size manipulation experiments conducted over two generations, we first showed that sib mating (leading to inbred offspring) did not influence the reproductive success of earwig parents. Second, the presence of tending mothers and the strength of sibling competition (i.e. brood size) did not influence the expression of inbreeding depression in the inbred offspring. By contrast, our results revealed that inbreeding dramatically depressed the reproductive success of inbred adult male offspring, but only had little effect on the reproductive success of inbred adult female offspring. Overall, this study demonstrates limited effects of family interactions on inbreeding depression in this species and emphasizes the importance of disentangling effects of sib mating early and late during development to better understand the evolution of mating systems and population dynamics. © 2013 The Authors. Journal of Evolutionary Biology © 2013 European Society For Evolutionary Biology.

English Language Learners' Nonword Repetition Performance: The Influence of Age, L2 Vocabulary Size, Length of L2 Exposure, and L1 Phonology.

PubMed

Duncan, Tamara Sorenson; Paradis, Johanne

2016-02-01

This study examined individual differences in English language learners' (ELLs) nonword repetition (NWR) accuracy, focusing on the effects of age, English vocabulary size, length of exposure to English, and first-language (L1) phonology. Participants were 75 typically developing ELLs (mean age 5;8 [years;months]) whose exposure to English began on average at age 4;4. Children spoke either a Chinese language or South Asian language as an L1 and were given English standardized tests for NWR and receptive vocabulary. Although the majority of ELLs scored within or above the monolingual normal range (71%), 29% scored below. Mixed logistic regression modeling revealed that a larger English vocabulary, longer English exposure, South Asian L1, and older age all had significant and positive effects on ELLs' NWR accuracy. Error analyses revealed the following L1 effect: onset consonants were produced more accurately than codas overall, but this effect was stronger for the Chinese group whose L1s have a more limited coda inventory compared with English. ELLs' NWR performance is influenced by a number of factors. Consideration of these factors is important in deciding whether monolingual norm referencing is appropriate for ELL children.

Considerations in Forest Growth Estimation Between Two Measurements of Mapped Forest Inventory Plots

Treesearch

Michael T. Thompson

2006-01-01

Several aspects of the enhanced Forest Inventory and Analysis (FIA) program?s national plot design complicate change estimation. The design incorporates up to three separate plot sizes (microplot, subplot, and macroplot) to sample trees of different sizes. Because multiple plot sizes are involved, change estimators designed for polyareal plot sampling, such as those...

Sample Size Requirements for Structural Equation Models: An Evaluation of Power, Bias, and Solution Propriety

ERIC Educational Resources Information Center

Wolf, Erika J.; Harrington, Kelly M.; Clark, Shaunna L.; Miller, Mark W.

2013-01-01

Determining sample size requirements for structural equation modeling (SEM) is a challenge often faced by investigators, peer reviewers, and grant writers. Recent years have seen a large increase in SEMs in the behavioral science literature, but consideration of sample size requirements for applied SEMs often relies on outdated rules-of-thumb.…

Class Size Effects on Reading Achievement Using PIRLS Data: Evidence from Greece

ERIC Educational Resources Information Center

Konstantopoulos, Spyros; Traynor, Anne

2014-01-01

Background/Context: The effects of class size on student achievement have gained considerable attention in education research and policy, especially over the last 30 years. Perhaps the best evidence about the effects of class size thus far has been produced from analyses of Project STAR data, a large-scale experiment where students and teachers…

Housing wealth and mortality: A register linkage study of the Finnish population.

PubMed

Laaksonen, Mikko; Tarkiainen, Lasse; Martikainen, Pekka

2009-09-01

In many countries home ownership is the main form of property and covers a major part of people's possessions. Since overall wealth is difficult to measure, many health studies have used home ownership as an indicator of wealth and material resources. However, most studies have measured housing wealth with a simple dichotomous measure of home ownership. We examined the associations between three different measures of housing wealth and overall mortality, separating subsidized renters and private renters, and using floor area and the number of rooms as measures of dwelling size. We further examined whether other socioeconomic factors, level of urbanisation of the region of residence, and household composition account for the found associations. Finns aged 35-79 years at the end of 1999 were followed up until the end of 2004. Data were drawn from various registers combined by Statistics Finland and linked with death records. The age-adjusted hazard ratio for mortality among subsidized renters compared to owner-occupiers was 2.26 in men and 1.87 in women. However, also private renters had clearly higher mortality than owner-occupiers, with the excess mortality of 92% in men and 61% in women. Both measures of home size were also strongly associated with mortality, with the excess risk of 1.7-3.0 in the lowest home size quintile compared to the highest. Adjusting for socioeconomic factors and mutually for all housing wealth measures considerably attenuated the associations. Further adjustment for urbanisation had no effect whereas adjustment for household size, marital status and living arrangements attenuated the associations of the two home size measures and mortality. However, a clear association remained between all housing wealth measures and mortality after all adjustments. Housing wealth summarises one's material circumstances over a prolonged period of time. Measures of housing wealth may therefore provide useful social classifications for studies on poor health and mortality especially in older age groups where most deaths occur.

Orbit orientation in didelphid marsupials (Didelphimorphia: Didelphidae)

PubMed Central

Pilatti, Patricia

2017-01-01

Abstract Usually considered a morphologically conservative group, didelphid marsupials present considerable variation in ecology and body size, some of which were shown to relate to morphological structures. Thus, changes on orbit morphology are likely and could be related to that variation. We calculated orbit orientation in 873 specimens of 16 Didelphidae genera yielding estimates of orbits convergence (their position relative to midsagittal line) and verticality (their position relative to frontal plane). We then compared similarities in these variables across taxa to ecological, morphological and phylogenetic data to evaluate the influencing factors on orbit orientation in didelphids. We found an inverse relation between convergence and verticality. Didelphids orbits have low verticality but are highly convergent, yet orbit orientation differs significantly between taxa, and that variation is related to morphological aspects of the cranium. Rostral variables are the only morphological features correlated with orbit orientation: increasing snout length yields more convergent orbits, whereas increase on snout breadth imply in more vertical orbits. Size and encephalization quotients are uncorrelated with orbit orientation. Among ecological data, diet showed significant correlation whereas locomotion is the factor that less affects the position of orbits. Phylogeny is uncorrelated to any orbital parameters measured. Ecological factors seemingly play a more important role on orbit orientation than previously expected, and differentiation on orbit orientation seems to be more functional than inherited. Thus, despite the apparent homogeneity on didelphid morphology, there is subtle morphological variability that may be directly related to feeding behavior. PMID:29492000

Quantification of sterol-specific response in human macrophages using automated imaged-based analysis.

PubMed

Gater, Deborah L; Widatalla, Namareq; Islam, Kinza; AlRaeesi, Maryam; Teo, Jeremy C M; Pearson, Yanthe E

2017-12-13

The transformation of normal macrophage cells into lipid-laden foam cells is an important step in the progression of atherosclerosis. One major contributor to foam cell formation in vivo is the intracellular accumulation of cholesterol. Here, we report the effects of various combinations of low-density lipoprotein, sterols, lipids and other factors on human macrophages, using an automated image analysis program to quantitatively compare single cell properties, such as cell size and lipid content, in different conditions. We observed that the addition of cholesterol caused an increase in average cell lipid content across a range of conditions. All of the sterol-lipid mixtures examined were capable of inducing increases in average cell lipid content, with variations in the distribution of the response, in cytotoxicity and in how the sterol-lipid combination interacted with other activating factors. For example, cholesterol and lipopolysaccharide acted synergistically to increase cell lipid content while also increasing cell survival compared with the addition of lipopolysaccharide alone. Additionally, ergosterol and cholesteryl hemisuccinate caused similar increases in lipid content but also exhibited considerably greater cytotoxicity than cholesterol. The use of automated image analysis enables us to assess not only changes in average cell size and content, but also to rapidly and automatically compare population distributions based on simple fluorescence images. Our observations add to increasing understanding of the complex and multifactorial nature of foam-cell formation and provide a novel approach to assessing the heterogeneity of macrophage response to a variety of factors.

Comparative genomics of the bacterial genus Streptococcus illuminates evolutionary implications of species groups.

PubMed

Gao, Xiao-Yang; Zhi, Xiao-Yang; Li, Hong-Wei; Klenk, Hans-Peter; Li, Wen-Jun

2014-01-01

Members of the genus Streptococcus within the phylum Firmicutes are among the most diverse and significant zoonotic pathogens. This genus has gone through considerable taxonomic revision due to increasing improvements of chemotaxonomic approaches, DNA hybridization and 16S rRNA gene sequencing. It is proposed to place the majority of streptococci into "species groups". However, the evolutionary implications of species groups are not clear presently. We use comparative genomic approaches to yield a better understanding of the evolution of Streptococcus through genome dynamics, population structure, phylogenies and virulence factor distribution of species groups. Genome dynamics analyses indicate that the pan-genome size increases with the addition of newly sequenced strains, while the core genome size decreases with sequential addition at the genus level and species group level. Population structure analysis reveals two distinct lineages, one including Pyogenic, Bovis, Mutans and Salivarius groups, and the other including Mitis, Anginosus and Unknown groups. Phylogenetic dendrograms show that species within the same species group cluster together, and infer two main clades in accordance with population structure analysis. Distribution of streptococcal virulence factors has no obvious patterns among the species groups; however, the evolution of some common virulence factors is congruous with the evolution of species groups, according to phylogenetic inference. We suggest that the proposed streptococcal species groups are reasonable from the viewpoints of comparative genomics; evolution of the genus is congruent with the individual evolutionary trajectories of different species groups.

Comparative Genomics of the Bacterial Genus Streptococcus Illuminates Evolutionary Implications of Species Groups

PubMed Central

Gao, Xiao-Yang; Zhi, Xiao-Yang; Li, Hong-Wei; Klenk, Hans-Peter; Li, Wen-Jun

2014-01-01

Members of the genus Streptococcus within the phylum Firmicutes are among the most diverse and significant zoonotic pathogens. This genus has gone through considerable taxonomic revision due to increasing improvements of chemotaxonomic approaches, DNA hybridization and 16S rRNA gene sequencing. It is proposed to place the majority of streptococci into “species groups”. However, the evolutionary implications of species groups are not clear presently. We use comparative genomic approaches to yield a better understanding of the evolution of Streptococcus through genome dynamics, population structure, phylogenies and virulence factor distribution of species groups. Genome dynamics analyses indicate that the pan-genome size increases with the addition of newly sequenced strains, while the core genome size decreases with sequential addition at the genus level and species group level. Population structure analysis reveals two distinct lineages, one including Pyogenic, Bovis, Mutans and Salivarius groups, and the other including Mitis, Anginosus and Unknown groups. Phylogenetic dendrograms show that species within the same species group cluster together, and infer two main clades in accordance with population structure analysis. Distribution of streptococcal virulence factors has no obvious patterns among the species groups; however, the evolution of some common virulence factors is congruous with the evolution of species groups, according to phylogenetic inference. We suggest that the proposed streptococcal species groups are reasonable from the viewpoints of comparative genomics; evolution of the genus is congruent with the individual evolutionary trajectories of different species groups. PMID:24977706

Social and economic influences on human behavioural response in an emerging epidemic

NASA Astrophysics Data System (ADS)

Phang, P.; Wiwatanapataphee, B.; Wu, Y. H.

2017-10-01

The human behavioural changes have been recognized as an important key in shaping the disease spreading and determining the success of control measures in the course of epidemic outbreaks. However, apart from cost-benefit considerations, in reality, people are heterogeneous in their preferences towards adopting certain protective actions to reduce their risk of infection, and social norms have a function in individuals’ decision making. Here, we studied the interplay between the epidemic dynamics, imitation dynamics and the heterogeneity of individual protective behavioural response under the considerations of both economic and social factors, with a simple mathematical compartmental model and multi-population game dynamical replicator equations. We assume that susceptibles in different subpopulations have different preferences in adopting either normal or altered behaviour. By incorporating both intra- and inter-group social pressure, the outcome of the strategy distribution depends on the initial proportion of susceptible with normal and altered strategies in both subpopulations. The increase of additional cost to susceptible with altered behaviour will discourage people to take up protective actions and hence results in higher epidemic final size. For a specific cost of altered behaviour, the social group pressure could be a “double edge sword”, though. We conclude that the interplays between individual protective behaviour adoption, imitation and epidemic dynamics are necessarily complex if both economic and social factors act on populations with existing preferences.

Inbreeding avoidance, patch isolation and matrix permeability influence dispersal and settlement choices by male agile antechinus in a fragmented landscape.

PubMed

Banks, Sam C; Lindenmayer, David B

2014-03-01

Animal dispersal is highly non-random and has important implications for the dynamics of populations in fragmented habitat. We identified interpatch dispersal events from genetic tagging, parentage analyses and assignment tests and modelled the factors associated with apparent emigration and post-dispersal settlement choices by individual male agile antechinus (Antechinus agilis, a marsupial carnivore of south-east Australian forests). Emigration decisions were best modelled with on data patch isolation and inbreeding risk. The choice of dispersal destination by males was influenced by inbreeding risk, female abundance, patch size, patch quality and matrix permeability (variation in land cover). Males were less likely to settle in patches without highly unrelated females. Our findings highlight the importance of individual-level dispersal data for understanding how multiple processes drive non-randomness in dispersal in modified landscapes. Fragmented landscapes present novel environmental, demographic and genetic contexts in which dispersal decisions are made, so the major factors affecting dispersal decisions in fragmented habitat may differ considerably from unfragmented landscapes. We show that the spatial scale of genetic neighbourhoods can be large in fragmented habitat, such that dispersing males can potentially settle in the presence of genetically similar females after moving considerable distances, thereby necessitating both a choice to emigrate and a choice of where to settle to avoid inbreeding. © 2013 The Authors. Journal of Animal Ecology © 2013 British Ecological Society.

Quantifying ADHD classroom inattentiveness, its moderators, and variability: a meta-analytic review.

PubMed

Kofler, Michael J; Rapport, Mark D; Alderson, R Matt

2008-01-01

Most classroom observation studies have documented significant deficiencies in the classroom attention of children with attention-deficit/hyperactivity disorder (ADHD) compared to their typically developing peers. The magnitude of these differences, however, varies considerably and may be influenced by contextual, sampling, diagnostic, and observational differences. Meta-analysis of 23 between-group classroom observation studies using weighted regression, publication bias, goodness of fit, best case, and original metric analyses. Across studies, a large effect size (ES = .73) was found prior to consideration of potential moderators. Weighted regression, best case, and original metric estimation indicate that this effect may be an underestimation of the classroom visual attention deficits of children with ADHD. Several methodological factors-classroom environment, sample characteristics, diagnostic procedures, and observational coding schema-differentially affect observed rates of classroom attentive behavior for children with ADHD and typically developing children. After accounting for these factors, children with ADHD were on-task approximately 75% of the time compared to 88% for their classroom peers (ES = 1.40). Children with ADHD were also more variable in their attentive behavior across studies. The present study confirmed that children with ADHD exhibit deficient and more variable visual attending to required stimuli in classroom settings and provided an aggregate estimation of the magnitude of these deficits at the group level. It also demonstrated the impact of situational, sampling, diagnostic, and observational variables on observed rates of on-task behavior.

Oil spills and their impacts on sand beach invertebrate communities: A literature review.

PubMed

Bejarano, Adriana C; Michel, Jacqueline

2016-11-01

Sand beaches are highly dynamic habitats that can experience considerable impacts from oil spills. This review provides a synthesis of the scientific literature on major oil spills and their impacts on sand beaches, with emphasis on studies documenting effects and recoveries of intertidal invertebrate communities. One of the key observations arising from this review is that more attention has generally been given to studying the impacts of oil spills on invertebrates (mostly macrobenthos), and not to documenting their biological recovery. Biological recovery of sand beach invertebrates is highly dynamic, depending on several factors including site-specific physical properties and processes (e.g., sand grain size, beach exposure), the degree of oiling, depth of oil burial, and biological factors (e.g., species-specific life-history traits). Recovery of affected communities ranges from several weeks to several years, with longer recoveries generally associated with physical factors that facilitate oil persistence, or when cleanup activities are absent on heavily oiled beaches. There are considerable challenges in quantifying impacts from spills on sand beach invertebrates because of insufficient baseline information (e.g., distribution, abundance and composition), knowledge gaps in their natural variability (spatial and temporal), and inadequate sampling and replication during and after oil spills. Thus, environment assessments of impacts and recovery require a rigorous experimental design that controls for confounding sources of variability. General recommendations on sampling strategies and toxicity testing, and a preliminary framework for incorporating species-specific life history traits into future assessments are also provided. Copyright © 2016 Elsevier Ltd. All rights reserved.

Statistical considerations in monitoring birds over large areas

USGS Publications Warehouse

Johnson, D.H.

2000-01-01

The proper design of a monitoring effort depends primarily on the objectives desired, constrained by the resources available to conduct the work. Typically, managers have numerous objectives, such as determining abundance of the species, detecting changes in population size, evaluating responses to management activities, and assessing habitat associations. A design that is optimal for one objective will likely not be optimal for others. Careful consideration of the importance of the competing objectives may lead to a design that adequately addresses the priority concerns, although it may not be optimal for any individual objective. Poor design or inadequate sample sizes may result in such weak conclusions that the effort is wasted. Statistical expertise can be used at several stages, such as estimating power of certain hypothesis tests, but is perhaps most useful in fundamental considerations of describing objectives and designing sampling plans.

Effect of Field Size and Length of Plantar Spur on Treatment Outcome in Radiation Therapy of Plantar Fasciitis: The Bigger the Better?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hermann, Robert Michael, E-mail: hermann@strahlentherapie-westerstede.com; Abteilung Strahlentherapie und Spezielle Onkologie, Medizinische Hochschule Hannover; Meyer, Andreas

2013-12-01

Purpose: Radiation therapy is well established in the treatment of painful plantar fasciitis or heel spur. A retrospective analysis was conducted to investigate the effect of field definition on treatment outcome and to determine the impact of factors potentially involved. Methods and Materials: A review of treatment data of 250 patients (285 heels) with a mean follow-up time of 11 months showed that complete symptom remission occurred in 38%, partial remission in 32%, and no change in 19% (11% were lost to follow-up). Variables such as radiologic evidence of plantar spurs, their length, radiation dose, field size, age, sex, andmore » onset of pain before administration of radiation therapy were investigated in univariate and multivariate regression analyses. Results: Treatment response depended upon age >53 years, length of heel spur ≤6.5 mm (or no radiologic evidence of a heel spur), and onset of pain <12 months before radiation therapy. Patients with these clinical prerequisites stood a 93% chance of clinical response. Without these prerequisites, only 49% showed any impact. No influence of field size on treatment outcome became evident. Conclusion: Patients with short plantar heel spurs benefit from radiation therapy equally well as patients without any radiologic evidence. Moreover, smaller field sizes have the same positive effect as commonly used large field definitions covering the entire calcaneal bone. This leads to a recommendation of a considerable reduction of field size in future clinical practice.« less

76 FR 23335 - Wilderness Stewardship Plan/Environmental Impact Statement, Sequoia and Kings Canyon National...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-26

... planning and environmental impact analysis process required to inform consideration of alternative... 5, 1996. Based on an analysis of the numerous scoping comments received, and with consideration of a... proper food storage; party size; camping and campsites; human waste management; stock use; meadow...

Conceptual design considerations and neutronics of lithium fall laser fusion target chambers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meier, W.R.; Thomson, W.B.

1978-05-31

Atomics International and Lawrence Livermore Laboratory are involved in the conceptual design of a laser fusion power plant incorporating the lithium fall target chamber. In this paper we discuss some of the more important design considerations for the target chamber and evaluate its nuclear performance. Sizing and configuration of the fall, hydraulic effects, and mechanical design considerations are addressed. The nuclear aspects examined include tritium breeding, energy deposition, and radiation damage.

Design and performance considerations of evaporative-pad, waste-heat greenhouses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olszewski, M.

1978-01-01

Rising fuel costs and limited fuel availability have forced greenhouse operators to seek alternative means of heating their greenhouses in an effort to reduce production costs and conserve energy. One such alternative uses power plant reject heat, which is contained in the condenser cooling water, and a bank of evaporative pads to provide winter heating. The design technique used to size the evaporative pad system to meet both summer cooling and winter heating demands is described. Additionally, a computational scheme that simulates the system performance is presented. This analytical model is used to determine the greenhouse operating conditions that maintainmore » the vegetation in its thermal comfort zone. The evaporative pad model uses the Merkel total heat approximation and an experimentally derived transfer coefficient. Energy balance considerations on the vegetation provide a means of viewing optimal vegetation growth in terms of greenhouse environmental factors. In general, the results indicate that the vegetation can be maintained within its thermal comfort zone if sufficient warm water is available to the pads and the air stream flow is properly adjusted.« less

Lead and Arsenic Bioaccessibility and Speciation as a Function of Soil Particle Size

EPA Science Inventory

Bioavailability research of soil metals has advanced considerably from default values to validated in vitro bioaccessibility (IVBA) assays for site-specific risk assessment. Previously, USEPA determined that the soil-size fraction representative of dermal adherence and consequent...

Using specific volume increment (SVI) for quantifying growth responses in trees - theoretical and practical considerations

Treesearch

Eddie Bevilacqua

2002-01-01

Comparative analysis of growth responses among trees following natural or anthropogenic disturbances is often confounded when comparing trees of different size because of the high correlation between growth and initial tree size: large trees tend to have higher absolute grow rates. Relative growth rate (RGR) may not be the most suitable size-dependent measure of growth...

40 CFR 1505.2 - Record of decision in cases requiring environmental impact statements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... alternatives based on relevant factors including economic and technical considerations and agency statutory missions. An agency shall identify and discuss all such factors including any essential considerations of...

Quantifying Intrinsic and Extrinsic Variability in Stochastic Gene Expression Models

PubMed Central

Singh, Abhyudai; Soltani, Mohammad

2013-01-01

Genetically identical cell populations exhibit considerable intercellular variation in the level of a given protein or mRNA. Both intrinsic and extrinsic sources of noise drive this variability in gene expression. More specifically, extrinsic noise is the expression variability that arises from cell-to-cell differences in cell-specific factors such as enzyme levels, cell size and cell cycle stage. In contrast, intrinsic noise is the expression variability that is not accounted for by extrinsic noise, and typically arises from the inherent stochastic nature of biochemical processes. Two-color reporter experiments are employed to decompose expression variability into its intrinsic and extrinsic noise components. Analytical formulas for intrinsic and extrinsic noise are derived for a class of stochastic gene expression models, where variations in cell-specific factors cause fluctuations in model parameters, in particular, transcription and/or translation rate fluctuations. Assuming mRNA production occurs in random bursts, transcription rate is represented by either the burst frequency (how often the bursts occur) or the burst size (number of mRNAs produced in each burst). Our analysis shows that fluctuations in the transcription burst frequency enhance extrinsic noise but do not affect the intrinsic noise. On the contrary, fluctuations in the transcription burst size or mRNA translation rate dramatically increase both intrinsic and extrinsic noise components. Interestingly, simultaneous fluctuations in transcription and translation rates arising from randomness in ATP abundance can decrease intrinsic noise measured in a two-color reporter assay. Finally, we discuss how these formulas can be combined with single-cell gene expression data from two-color reporter experiments for estimating model parameters. PMID:24391934

Quantifying intrinsic and extrinsic variability in stochastic gene expression models.

PubMed

Singh, Abhyudai; Soltani, Mohammad

2013-01-01

Genetically identical cell populations exhibit considerable intercellular variation in the level of a given protein or mRNA. Both intrinsic and extrinsic sources of noise drive this variability in gene expression. More specifically, extrinsic noise is the expression variability that arises from cell-to-cell differences in cell-specific factors such as enzyme levels, cell size and cell cycle stage. In contrast, intrinsic noise is the expression variability that is not accounted for by extrinsic noise, and typically arises from the inherent stochastic nature of biochemical processes. Two-color reporter experiments are employed to decompose expression variability into its intrinsic and extrinsic noise components. Analytical formulas for intrinsic and extrinsic noise are derived for a class of stochastic gene expression models, where variations in cell-specific factors cause fluctuations in model parameters, in particular, transcription and/or translation rate fluctuations. Assuming mRNA production occurs in random bursts, transcription rate is represented by either the burst frequency (how often the bursts occur) or the burst size (number of mRNAs produced in each burst). Our analysis shows that fluctuations in the transcription burst frequency enhance extrinsic noise but do not affect the intrinsic noise. On the contrary, fluctuations in the transcription burst size or mRNA translation rate dramatically increase both intrinsic and extrinsic noise components. Interestingly, simultaneous fluctuations in transcription and translation rates arising from randomness in ATP abundance can decrease intrinsic noise measured in a two-color reporter assay. Finally, we discuss how these formulas can be combined with single-cell gene expression data from two-color reporter experiments for estimating model parameters.

A portrait of a sucker using landscape genetics: how colonization and life history undermine the idealized dendritic metapopulation.

PubMed

Salisbury, Sarah J; McCracken, Gregory R; Keefe, Donald; Perry, Robert; Ruzzante, Daniel E

2016-09-01

Dendritic metapopulations have been attributed unique properties by in silico studies, including an elevated genetic diversity relative to a panmictic population of equal total size. These predictions have not been rigorously tested in nature, nor has there been full consideration of the interacting effects among contemporary landscape features, colonization history and life history traits of the target species. We tested for the effects of dendritic structure as well as the relative importance of life history, environmental barriers and historical colonization on the neutral genetic structure of a longnose sucker (Catostomus catostomus) metapopulation in the Kogaluk watershed of northern Labrador, Canada. Samples were collected from eight lakes, genotyped with 17 microsatellites, and aged using opercula. Lakes varied in differentiation, historical and contemporary connectivity, and life history traits. Isolation by distance was detected only by removing two highly genetically differentiated lakes, suggesting a lack of migration-drift equilibrium and the lingering influence of historical factors on genetic structure. Bayesian analyses supported colonization via the Kogaluk's headwaters. The historical concentration of genetic diversity in headwaters inferred by this result was supported by high historical and contemporary effective sizes of the headwater lake, T-Bone. Alternatively, reduced allelic richness in headwaters confirmed the dendritic structure's influence on gene flow, but this did not translate to an elevated metapopulation effective size. A lack of equilibrium and upstream migration may have dampened the effects of dendritic structure. We suggest that interacting historical and contemporary factors prevent the achievement of the idealized traits of a dendritic metapopulation in nature. © 2016 John Wiley & Sons Ltd.

Dissection of Genetic Factors underlying Wheat Kernel Shape and Size in an Elite × Nonadapted Cross using a High Density SNP Linkage Map.

PubMed

Kumar, Ajay; Mantovani, E E; Seetan, R; Soltani, A; Echeverry-Solarte, M; Jain, S; Simsek, S; Doehlert, D; Alamri, M S; Elias, E M; Kianian, S F; Mergoum, M

2016-03-01

Wheat kernel shape and size has been under selection since early domestication. Kernel morphology is a major consideration in wheat breeding, as it impacts grain yield and quality. A population of 160 recombinant inbred lines (RIL), developed using an elite (ND 705) and a nonadapted genotype (PI 414566), was extensively phenotyped in replicated field trials and genotyped using Infinium iSelect 90K assay to gain insight into the genetic architecture of kernel shape and size. A high density genetic map consisting of 10,172 single nucleotide polymorphism (SNP) markers, with an average marker density of 0.39 cM/marker, identified a total of 29 genomic regions associated with six grain shape and size traits; ∼80% of these regions were associated with multiple traits. The analyses showed that kernel length (KL) and width (KW) are genetically independent, while a large number (∼59%) of the quantitative trait loci (QTL) for kernel shape traits were in common with genomic regions associated with kernel size traits. The most significant QTL was identified on chromosome 4B, and could be an ortholog of major rice grain size and shape gene or . Major and stable loci also were identified on the homeologous regions of Group 5 chromosomes, and in the regions of (6A) and (7A) genes. Both parental genotypes contributed equivalent positive QTL alleles, suggesting that the nonadapted germplasm has a great potential for enhancing the gene pool for grain shape and size. This study provides new knowledge on the genetic dissection of kernel morphology, with a much higher resolution, which may aid further improvement in wheat yield and quality using genomic tools. Copyright © 2016 Crop Science Society of America.

Building America Case Study: The Impact of Thermostat Placement in Low-Load Homes in Sunny Climates, Denver, Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

Modern, energy-efficient homes conforming to the Zero Energy Ready Home standard face the challenge of meeting high customer expectations for comfort. Traditional heating, ventilation, and air conditioning (HVAC) sizing and control strategies may be insufficient to adequately condition each zone due to unique load patterns in each room caused by a number of factors. These factors include solar heat gains, occupant-related gains, and gains associated with appliances and electronics. Because of shrinking shell loads, these intermittent factors are having an increasingly significant impact on the thermal load in each zone. Consequently, occupant comfort can be compromised. To evaluate the impactmore » of climate and house geometry, as well as HVAC system and control strategies on comfort conditions, IBACOS analyzed the results of 99 TRNSYS multiple-zone simulations. The results of this analysis indicate that for simple-geometry and single-story plans, a single zone and thermostat can adequately condition the entire house. Demanding house geometry and houses with multiple stories require the consideration of multiple thermostats and multiple zones.« less

Risk Assessment of Heating, Ventilating, and Air-Conditioning Strategies in Low-Load Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poerschke, Andrew

2016-02-17

"Modern, energy efficient homes conforming to the Zero Energy Ready Home standard face the challenge of meeting high customer expectations for comfort. Traditional heating, ventilation, and air conditioning (HVAC) sizing and control strategies may be insufficient to adequately condition each zone due to unique load patterns in each room caused by a number of factors. These factors include solar heat gains, occupant-related gains, and gains associated with appliances and electronics. Because of shrinking shell loads, these intermittent factors are having an increasingly significant impact on the thermal load in each zone. Consequently, occupant comfort can be compromised. To evaluate themore » impact of climate and house geometry, as well as HVAC system and control strategies on comfort conditions, IBACOS analyzed the results of 99 TRNSYS multiple-zone simulations. The results of this analysis indicate that for simple-geometry and single-story plans, a single zone and thermostat can adequately condition the entire house. Demanding house geometry and houses with multiple stories require the consideration of multiple thermostats and multiple zones.« less

Simplex optimization of headspace factors for headspace gas chromatography determination of residual solvents in pharmaceutical products.

PubMed

Grodowska, Katarzyna; Parczewski, Andrzej

2013-01-01

The purpose of the present work was to find optimum conditions of headspace gas chromatography (HS-GC) determination of residual solvents which usually appear in pharmaceutical products. Two groups of solvents were taken into account in the present examination. Group I consisted of isopropanol, n-propanol, isobutanol, n-butanol and 1,4-dioxane and group II included cyclohexane, n-hexane and n-heptane. The members of the groups were selected in previous investigations in which experimental design and chemometric methods were applied. Four factors were taken into consideration in optimization which describe HS conditions: sample volume, equilibration time, equilibrium temperature and NaCl concentration in a sample. The relative GC peak area served as an optimization criterion which was considered separately for each analyte. Sequential variable size simplex optimization strategy was used and the progress of optimization was traced and visualized in various ways simultaneously. The optimum HS conditions appeared different for the groups of solvents tested, which proves that influence of experimental conditions (factors) depends on analyte properties. The optimization resulted in significant signal increase (from seven to fifteen times).

The crowding factor method applied to parafoveal vision

PubMed Central

Ghahghaei, Saeideh; Walker, Laura

2016-01-01

Crowding increases with eccentricity and is most readily observed in the periphery. During natural, active vision, however, central vision plays an important role. Measures of critical distance to estimate crowding are difficult in central vision, as these distances are small. Any overlap of flankers with the target may create an overlay masking confound. The crowding factor method avoids this issue by simultaneously modulating target size and flanker distance and using a ratio to compare crowded to uncrowded conditions. This method was developed and applied in the periphery (Petrov & Meleshkevich, 2011b). In this work, we apply the method to characterize crowding in parafoveal vision (<3.5 visual degrees) with spatial uncertainty. We find that eccentricity and hemifield have less impact on crowding than in the periphery, yet radial/tangential asymmetries are clearly preserved. There are considerable idiosyncratic differences observed between participants. The crowding factor method provides a powerful tool for examining crowding in central and peripheral vision, which will be useful in future studies that seek to understand visual processing under natural, active viewing conditions. PMID:27690170

Single-state electronic ballast with dimming feature and unity power factor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu, T.F.; Yu, T.H.; Chiang, M.C.

1998-05-01

Analysis, design, and practical consideration of a single-stage electronic ballast with dimming feature and unity power factor are presented in this paper. The proposed single-stage ballast is the combination of a boost converter and a half-bridge series-resonant parallel-loaded inverter. The boost semistage working in the discontinuous conduction mode functions as a power factor corrector and the inverter semistage operated above resonance are employed to ballast the lamp. Replacing the lamp with the plasma model, analysis of the ballast is fulfilled. The dimming feature is carried out by pulse-width modulation (PWM) and variable-frequency controls simultaneously. The proposed single-stage ballast is suitablemore » for applications with moderate power level and low-line voltage while requiring a high-output voltage. It can save a controller, an active switch and its driver, reduce size, and possibly increase system reliability while requiring two additional diodes over a conventional two-stage system. A prototype was implemented to verify the theoretical discussion. The hardware measurements have shown that the desired performance can be achieved feasibly.« less

Effect of experimental and sample factors on dehydration kinetics of mildronate dihydrate: mechanism of dehydration and determination of kinetic parameters.

PubMed

Bērziņš, Agris; Actiņš, Andris

2014-06-01

The dehydration kinetics of mildronate dihydrate [3-(1,1,1-trimethylhydrazin-1-ium-2-yl)propionate dihydrate] was analyzed in isothermal and nonisothermal modes. The particle size, sample preparation and storage, sample weight, nitrogen flow rate, relative humidity, and sample history were varied in order to evaluate the effect of these factors and to more accurately interpret the data obtained from such analysis. It was determined that comparable kinetic parameters can be obtained in both isothermal and nonisothermal mode. However, dehydration activation energy values obtained in nonisothermal mode showed variation with conversion degree because of different rate-limiting step energy at higher temperature. Moreover, carrying out experiments in this mode required consideration of additional experimental complications. Our study of the different sample and experimental factor effect revealed information about changes of the dehydration rate-limiting step energy, variable contribution from different rate limiting steps, as well as clarified the dehydration mechanism. Procedures for convenient and fast determination of dehydration kinetic parameters were offered. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

The inhabited environment, infrastructure development and advanced urbanization in China’s Yangtze River Delta Region

NASA Astrophysics Data System (ADS)

Zhu, Xiaoqing; Gao, Weijun; Zhou, Nan; Kammen, Daniel M.; Wu, Yiqun; Zhang, Yao; Chen, Wei

2016-12-01

This paper analyzes the relationship among the inhabited environment, infrastructure development and environmental impacts in China’s heavily urbanized Yangtze River Delta region. Using primary human environment data for the period 2006-2014, we examine factors affecting the inhabited environment and infrastructure development: urban population, GDP, built-up area, energy consumption, waste emission, transportation, real estate and urban greenery. Then we empirically investigate the impact of advanced urbanization with consideration of cities’ differences. Results from this study show that the growth rate of the inhabited environment and infrastructure development is strongly influenced by regional development structure, functional orientations, traffic network and urban size and form. The effect of advanced urbanization is more significant in large and mid-size cities than huge and mega cities. Energy consumption, waste emission and real estate in large and mid-size cities developed at an unprecedented rate with the rapid increase of economy. However, urban development of huge and mega cities gradually tended to be saturated. The transition development in these cities improved the inhabited environment and ecological protection instead of the urban construction simply. To maintain a sustainable advanced urbanization process, policy implications included urban sprawl control polices, ecological development mechanisms and reforming the economic structure for huge and mega cities, and construct major cross-regional infrastructure, enhance the carrying capacity and improvement of energy efficiency and structure for large and mid-size cities.

Electromagnetic tracking in the clinical environment

PubMed Central

Yaniv, Ziv; Wilson, Emmanuel; Lindisch, David; Cleary, Kevin

2009-01-01

When choosing an electromagnetic tracking system (EMTS) for image-guided procedures several factors must be taken into consideration. Among others these include the system’s refresh rate, the number of sensors that need to be tracked, the size of the navigated region, the system interaction with the environment, whether the sensors can be embedded into the tools and provide the desired transformation data, and tracking accuracy and robustness. To date, the only factors that have been studied extensively are the accuracy and the susceptibility of EMTSs to distortions caused by ferromagnetic materials. In this paper the authors shift the focus from analysis of system accuracy and stability to the broader set of factors influencing the utility of EMTS in the clinical environment. The authors provide an analysis based on all of the factors specified above, as assessed in three clinical environments. They evaluate two commercial tracking systems, the Aurora system from Northern Digital Inc., and the 3D Guidance system with three different field generators from Ascension Technology Corp. The authors show that these systems are applicable to specific procedures and specific environments, but that currently, no single system configuration provides a comprehensive solution across procedures and environments. PMID:19378748

Clinicopathological and Molecular Factors, Risk Factors, Treatment Outcomes and Risk of Recurrence in Mesenteric and Retroperitoneal Extragastrointestinal Stromal Tumors.

PubMed

Apostolou, Konstantinos G; Schizas, Dimitrios; Vavouraki, Eleni; Michalinos, Adamantios; Tsilimigras, Diamantis I; Garmpis, Nikolaos; Damaskos, Christos; Papalampros, Alexandros; Liakakos, Theodore

2018-04-01

The objective of the present study was to determine the clinicopathological factors and treatment outcomes of patients suffering from mesenteric or retroperitoneal extragastrointestinal stromal tumors (EGISTs). A detailed search in PubMed, using the key words "extragastrointestinal stromal tumors" and "EGIST", found eight studies fulfilling the criteria of this study. Thirty-six patients with a mesenteric and 24 patients with a retroperitoneal EGIST were analyzed, with a follow-up period ranging from 2 to 192 months. Retroperitoneal tumors presented as larger tumors than mesenteric ones, with 95% and 93% immunohistochemical positivity for CD117 antigen, respectively. Surgical resection was performed in 91% of cases, with 57% of patients with mesenteric and 70% of patients with retroperitoneal EGISTs being alive at the last follow-up. EGISTs most commonly are of considerable size and usually with a high mitotic count, rendering them high-risk tumors. Tumor necrosis, nuclear atypia, tumor histology, and mutations in the tyrosine kinase KIT or platelet-derived growth factor receptor A (PDGFRA) gene, seem to influence tumor behavior. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Dogs on the Move: Factors Impacting Animal Shelter and Rescue Organizations’ Decisions to Accept Dogs from Distant Locations

PubMed Central

Simmons, Kaitlyn E.; Hoffman, Christy L.

2016-01-01

Long-distance dog transfer programs are a topic of burgeoning interest in the animal welfare community, but little research has focused on such programs. This exploratory study, which surveyed 193 individuals associated with animal shelter and rescue organizations in the United States, evaluated factors that impacted organizations’ decisions to transfer in dogs over long distances (>100 miles) and assessed what criteria were commonly valued by destination organizations. Specifically, we examined the following aspects of long-distance transfer programs: (1) logistics of long-distance dog transfers; (2) factors impacting dog selection; (3) medical requirements; (4) partnerships formed between source and destination organizations; and (5) perceptions of long-distance dog transfer programs by individuals affiliated with the destination organizations. This study revealed that many logistical considerations factor into transfer decisions and the formation of healthy partnerships between source and destination organizations. Participants indicated their organization’s willingness to receive dogs of various sizes, coat colors and ages, but organizations often had restrictions regarding the breeds they would accept. Study findings indicate some organizations have strict quarantine policies and pre-transfer medical requirements, while others have no such requirements. PMID:26848694

17 CFR 229.904 - (Item 904) Risk factors and other considerations.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 17 Commodity and Securities Exchanges 2 2011-04-01 2011-04-01 false (Item 904) Risk factors and... 904) Risk factors and other considerations. (a) Immediately following the summary required by Item 903 of this subpart (§ 229.903), describe in reasonable detail each material risk and effect of the roll...

Characterising rock fracture aperture-spacing relationships using power-law relationships: some considerations

NASA Astrophysics Data System (ADS)

Brook, Martin; Hebblewhite, Bruce; Mitra, Rudrajit

2016-04-01

The size-scaling of rock fractures is a well-studied problem in geology, especially for permeability quantification. The intensity of fractures may control the economic exploitation of fractured reservoirs because fracture intensity describes the abundance of fractures potentially available for fluid flow. Moreover, in geotechnical engineering, fractures are important for parameterisation of stress models and excavation design. As fracture data is often collected from widely-spaced boreholes where core recovery is often incomplete, accurate interpretation and representation of fracture aperture-frequency relationships from sparse datasets is important. Fracture intensity is the number of fractures encountered per unit length along a sample scanline oriented perpendicular to the fractures in a set. Cumulative frequency of fractures (F) is commonly related to fracture aperture (A) in the form of a power-law (F = aA-b), with variations in the size of the a coefficient between sites interpreted to equate to fracture frequency for a given aperture (A). However, a common flaw in this approach is that even a small change in b can have a large effect on the response of the fracture frequency (F) parameter. We compare fracture data from the Late Permian Rangal Coal Measures from Australia's Bowen Basin, with fracture data from Jurassic carbonates from the Sierra Madre Oriental, northeastern Mexico. Both power-law coefficient a and exponent b control the fracture aperture-frequency relationship in conjunction with each other; that is, power-laws with relatively low a coefficients have relatively high b exponents and vice versa. Hence, any comparison of different power-laws must take both a and b into consideration. The corollary is that different sedimentary beds in the Sierra Madre carbonates do not show ˜8× the fracture frequency for a given fracture aperture, as based solely on the comparison of coefficient a. Rather, power-law "sensitivity factors" developed from both Sierra Madre and the Bowen Basin span similar ranges, indicating that the factor of increase in frequency (F) for a doubling of aperture size (A) shows similar relationships and variability from both sites. Despite their limitations, we conclude that fracture aperture-frequency power-law relationships are valid and, when interpreted carefully, provide a useful basis for comparing rock fracture distributions across different sites.

On the correlation of plume centerline velocity decay of turbulent acoustically excited jets

NASA Technical Reports Server (NTRS)

Von Glahn, Uwe H.

1987-01-01

Acoustic excitation has been shown to alter the velocity decay and spreading characteristics of jet plumes by modifying the large-scale structures in the plume shear layer. The present work consists of reviewing and analyzing available published and unpublished experimental data in order to determine the importance and magnitude of the several variables that contribute to plume modification by acoustic excitation. Included in the study were consideration of the effects of internal or external acoustic excitation, excitation Strouhal number, acoustic excitation level, nozzle size and flow conditions. The last include jet Mach number and jet temperature. The effects of these factors on the plume centerline velocity decay are then summarized in an overall empirical correlation.

On the use of topology optimization for improving heat transfer in molding process

NASA Astrophysics Data System (ADS)

Agazzi, A.; LeGoff, R.; Truc-Vu, C.

2016-10-01

In the plastic industry, one of the key factor is to control heat transfer. One way to achieve that goal is to design an effective cooling system. But in some area of the mold, where it is not possible to design cooling system, the use of a highly conductive material, such as copper pin, is often used. Most of the time, the location, the size and the quantity of the copper pin are made by empirical considerations, without using optimization procedures. In this article, it is proposed to use topology optimization, in order to improve transient conductive heat transfer in an injection/blowing mold. Two methodologies are applied and compared. Finally, the optimal distribution of cooper pin in the mold is given.

Impact of absorptivity and wavelength on the optical properties of aggregates with sintering necks

NASA Astrophysics Data System (ADS)

Bao, Yujia; Huang, Yong; He, Beichen

2018-04-01

In this paper, we constructed sintered aggregates based on the particle superposition model and apply the ball-necking factor η to characterize the sintering degree. The impact of the absorptivity characterized by the complex refractive index m and the wavelength of the incident light λ on the optical properties of aggregates with different η were compared and investigated. The results indicate that for different m and λ, the light scattering characteristics exhibit regular changes in the values, the peak locations and the size trends. Further, the deviation of 1 - S22/S11 caused by various η is noteworthy and considerable so that it can be used as a probe sensor parameter in the detection of the sintered aggregates configuration.

Conduct Disorder and Neighborhood Effects.

PubMed

Jennings, Wesley G; Perez, Nicholas M; Reingle Gonzalez, Jennifer M

2018-05-07

There has been a considerable amount of scholarly attention to the relationship between neighborhood effects and conduct disorder, particularly in recent years. Having said this, it has been nearly two decades since a comprehensive synthesis of this literature has been conducted. Relying on a detailed and comprehensive search strategy and inclusion criteria, this article offers a systematic and interdisciplinary review of 47 empirical studies that have examined neighborhood effects and conduct disorder. Described results suggest that there are generally robust linkages between adverse neighborhood factors and conduct disorder and externalizing behavior problems, as 67 of the 93 (72.04%) effect sizes derived from these studies yielded statistically significant neighborhood effects. The review also identifies salient mediating and moderating influences. It discusses study limitations and directions for future research as well.

Evaluation of stratification factors and score-scales in clinical trials of treatment of clinical mastitis in dairy cows.

PubMed

Hektoen, L; Ødegaard, S A; Løken, T; Larsen, S

2004-05-01

There is often a need to reduce sample size in clinical trials due to practical limitations and ethical considerations. Better comparability between treatment groups by use of stratification in the design, and use of continuous outcome variables in the evaluation of treatment results, are two methods that can be used in order to achieve this. In this paper the choice of stratification factors in trials of clinical mastitis in dairy cows is investigated, and two score-scales for evaluation of clinical mastitis are introduced. The outcome in 57 dairy cows suffering from clinical mastitis and included in a clinical trial comparing homeopathic treatment, placebo and a standard antibiotic treatment is investigated. The strata of various stratification factors are compared across treatments to determine which other factors influence outcome. The two score scales, measuring acute and chronic mastitis symptoms, respectively, are evaluated on their ability to differentiate between patients classified from clinical criteria as responders or non-responders to treatment. Differences were found between the strata of the factors severity of mastitis, lactation number, previous mastitis this lactation and bacteriological findings. These factors influence outcome of treatment and appear relevant as stratification factors in mastitis trials. Both score scales differentiated between responders and non-responders to treatment and were found useful for evaluation of mastitis and mastitis treatment.

The influence of declining air lead levels on blood lead-air lead slope factors in children.

PubMed

Richmond-Bryant, Jennifer; Meng, Qingyu; Davis, Allen; Cohen, Jonathan; Lu, Shou-En; Svendsgaard, David; Brown, James S; Tuttle, Lauren; Hubbard, Heidi; Rice, Joann; Kirrane, Ellen; Vinikoor-Imler, Lisa C; Kotchmar, Dennis; Hines, Erin P; Ross, Mary

2014-07-01

It is difficult to discern the proportion of blood lead (PbB) attributable to ambient air lead (PbA), given the multitude of lead (Pb) sources and pathways of exposure. The PbB-PbA relationship has previously been evaluated across populations. This relationship was a central consideration in the 2008 review of the Pb national ambient air quality standards. The objectives of this study were to evaluate the relationship between PbB and PbA concentrations among children nationwide for recent years and to compare the relationship with those obtained from other studies in the literature. We merged participant-level data for PbB from the National Health and Nutrition Examination Survey (NHANES) III (1988-1994) and NHANES 9908 (1999-2008) with PbA data from the U.S. Environmental Protection Agency. We applied mixed-effects models, and we computed slope factor, d[PbB]/d[PbA] or the change in PbB per unit change in PbA, from the model results to assess the relationship between PbB and PbA. Comparing the NHANES regression results with those from the literature shows that slope factor increased with decreasing PbA among children 0-11 years of age. These findings suggest that a larger relative public health benefit may be derived among children from decreases in PbA at low PbA exposures. Simultaneous declines in Pb from other sources, changes in PbA sampling uncertainties over time largely related to changes in the size distribution of Pb-bearing particulate matter, and limitations regarding sampling size and exposure error may contribute to the variability in slope factor observed across peer-reviewed studies.

Scale considerations for ecosystem management

Treesearch

Jonathan B. Haufler; Thomas R. Crow; David Wilcove

1999-01-01

One of the difficult challenges facing ecosystem management is the determination of appropriate spatial and temporal scales to use. Scale in spatial sence includes considerations of both the size area or extent of an ecosystem management activity, as well as thedegree of resolution of mapped or measured data. In the temporal sense, scale concerns the duration of both...

What Are the Safety Considerations for Insulin Control for Athletes?

ERIC Educational Resources Information Center

McDaniel, Larry W.; Olson, Sara; Gaudet, Laura; Jackson, Allen

2010-01-01

Athletes diagnosed with diabetes may have difficulty with their blood sugar levels fluctuating during intense exercise. Considerations for athletes with insulin concerns may range anywhere from exercise rehabilitation to the use of an automatic insulin pump. The automatic insulin pump is a small battery-operated device about the size of a pager.…

On the size of sports fields

NASA Astrophysics Data System (ADS)

Darbois Texier, Baptiste; Cohen, Caroline; Dupeux, Guillaume; Quéré, David; Clanet, Christophe

2014-03-01

The size of sports fields considerably varies from a few meters for table tennis to hundreds of meters for golf. We first show that this size is mainly fixed by the range of the projectile, that is, by the aerodynamic properties of the ball (mass, surface, drag coefficient) and its maximal velocity in the game. This allows us to propose general classifications for sports played with a ball.

Three-phase boundary length in solid-oxide fuel cells: A mathematical model

NASA Astrophysics Data System (ADS)

Janardhanan, Vinod M.; Heuveline, Vincent; Deutschmann, Olaf

A mathematical model to calculate the volume specific three-phase boundary length in the porous composite electrodes of solid-oxide fuel cell is presented. The model is exclusively based on geometrical considerations accounting for porosity, particle diameter, particle size distribution, and solids phase distribution. Results are presented for uniform particle size distribution as well as for non-uniform particle size distribution.

On Using a Pilot Sample Variance for Sample Size Determination in the Detection of Differences between Two Means: Power Consideration

ERIC Educational Resources Information Center

Shieh, Gwowen

2013-01-01

The a priori determination of a proper sample size necessary to achieve some specified power is an important problem encountered frequently in practical studies. To establish the needed sample size for a two-sample "t" test, researchers may conduct the power analysis by specifying scientifically important values as the underlying population means…

Genetic variation in tree structure and its relation to size in Douglas-fir: I. Biomass partitioning, foliage efficiency, stem form, and wood density.

Treesearch

J.B. St. Clair

1994-01-01

Genetic variation and covariation among traits of tree size and structure were assessed in an 18-year-old Douglas-fir (Pseudotsuga menziesii var. menziesii (Mirb.) Franco) genetic test in the Coast Range of Oregon. Considerable genetic variation was found in size, biomass partitioning, and wood density, and genetic gains may be...

Variability in adherence to clinical practice guidelines and recommendations in COPD outpatients: a multi-level, cross-sectional analysis of the EPOCONSUL study.

PubMed

Calle Rubio, Myriam; López-Campos, José Luis; Soler-Cataluña, Juan J; Alcázar Navarrete, Bernardino; Soriano, Joan B; Rodríguez González-Moro, José Miguel; Fuentes Ferrer, Manuel E; Rodríguez Hermosa, Juan Luis

2017-12-02

Clinical audits have reported considerable variability in COPD medical care and frequent inconsistencies with recommendations. The objectives of this study were to identify factors associated with a better adherence to clinical practice guidelines and to explore determinants of this variability at the the hospital level. EPOCONSUL is a Spanish nationwide clinical audit that evaluates the outpatient management of COPD. Multilevel logistic regression with two levels was performed to assess the relationships between individual and disease-related factors, as well as hospital characteristics. A total of 4508 clinical records of COPD patients from 59 Spanish hospitals were evaluated. High variability was observed among hospitals in terms of medical care. Some of the patient's characteristics (airflow obstruction, degree of dyspnea, exacerbation risk, presence of comorbidities), the hospital factors (size and respiratory nurses available) and treatment at a specialized COPD outpatient clinic were identified as factors associated with a better adherence to recommendations, although this only explains a small proportion of the total variance. To be treated at a specialized COPD outpatient clinic and some intrinsic patient characteristics were factors associated with a better adherence to guideline recommendations, although these variables were only explaining part of the high variability observed among hospitals in terms of COPD medical care.

Implications of prognostic factors and risk groups in the management of differentiated thyroid cancer.

PubMed

Shaha, Ashok R

2004-03-01

The outcome in differentiated thyroid cancer generally depends on the stage of the disease at the time of presentation; prognostic factors such as age, grade, size, extension, or distant metastasis; and risk groups (eg, low or high risk). The author has reviewed a large number of patients with differentiated thyroid cancer to analyze their hypothesis and to confirm that various risk groups have a major implication in relation to extent of the treatment and outcome. Differentiated thyroid cancers make up 90% of all thyroid tumors. The prognostic factors are well defined, such as age, size of the tumor, extrathyroidal extension, presence of distant metastasis, histological appearance, and grade of the tumor. The author has previously divided the risk groups into low-, intermediate-, and high-risk categories based on prognostic factors. The study describes the author's treatment approach related to the extent of thyroidectomy and adjuvant therapy based on various risk groups and the long-term survival. Retrospective. In a retrospective review of 1038 patients with differentiated thyroid carcinoma, various prognostic factors were studied by univariate and multivariate analysis. The significant prognostic factors were studied in detail and, based on these prognostic factors, the patients were divided into low-, intermediate- and high-risk groups. The survival curves were plotted by Kaplan-Meier method. The long-term survivals in low-, intermediate- and high-risk groups were 99%, 87%, and 57% respectively. Based on these risk groups, a decision tree was made regarding extent of thyroidectomy and adjuvant treatment. In the high-risk group and selected patients in the intermediate-risk group, aggressive surgery including removal of all gross disease and extrathyroidal extension with postoperative radioactive iodine ablation is recommended. In the low-risk group and selected patients in the intermediate-risk group, lobectomy appears to be satisfactory with excellent long-term outcome. The surgical treatment offers the best long-term results in low-risk patients, and the role of adjuvant treatment in this group is questionable. The decisions in the management of well-differentiated thyroid cancer should be based on various prognostic factors and risk groups. The long-term survival in the low-risk group is excellent, and consideration should be given to conservative surgical resection depending on the extent of the disease. In the high-risk group and selected patients in the intermediate-risk group, total thyroidectomy with radioactive ablation is warranted. A consideration may be given to external-beam radiation therapy in selected high-risk patients. It is apparent, based on the author's clinical experience and critical retrospective analysis, that the author's hypothesis that risk groups are extremely important in the long-term outcome of patients with differentiated thyroid cancer is correct. Based on various risk groups, the author currently is able to guide the treatment policies for thyroid cancer.

Setting monitoring objectives for landscape-size areas

Treesearch

Craig M. Olson; Dean Angelides

2000-01-01

The setting of objectives for monitoring schemes for landscape-size areas should be a complex task in today's regulatory and sociopolitical atmosphere. The technology available today, the regulatory environment, and the sociopolitical considerations require multiresource inventory and monitoring schemes, whether tile ownership is industrial or for preservation....

Effect of Feedstock Size and its Distribution on the Properties of Detonation Sprayed Coatings

NASA Astrophysics Data System (ADS)

Suresh Babu, P.; Rao, D. S.; Rao, G. V. N.; Sundararajan, G.

2007-06-01

The detonation spraying is one of the most promising thermal spray variants for depositing wear and corrosion resistant coatings. The ceramic (Al2O3), metallic (Ni-20 wt%Cr) , and cermets (WC-12 wt%Co) powders that are commercially available were separated into coarser and finer size ranges with relatively narrow size distribution by employing centrifugal air classifier. The coatings were deposited using detonation spray technique. The effect of particle size and its distribution on the coating properties were examined. The surface roughness and porosity increased with increasing powder particle size for all the coatings consistently. The feedstock size was also found to influence the phase composition of Al2O3 and WC-Co coatings; however does not influence the phase composition of Ni-Cr coatings. The associated phase change and %porosity of the coatings imparted considerable variation in the coating hardness, fracture toughness, and wear properties. The fine and narrow size range WC-Co coating exhibited superior wear resistance. The coarse and narrow size distribution Al2O3 coating exhibited better performance under abrasion and sliding wear modes however under erosion wear mode the as-received Al2O3 coating exhibited better performance. In the case of metallic (Ni-Cr) coatings, the coatings deposited using coarser powder exhibited marginally lower-wear rate under abrasion and sliding wear modes. However, under erosion wear mode, the coating deposited using finer particle size exhibited considerably lower-wear rate.

In-vehicle crash avoidance warning systems : human factors considerations

DOT National Transportation Integrated Search

1997-02-01

This document represents the final report of the work performed under contract DTNH22-91 C-07004, In-Vehicle Crash Avoidance Warning Systems: Human Factors Considerations. This project was performed to develop guidelines for the interface desig...

Genome-wide association identifies candidate genes for ovulation rate in swine

USDA-ARS?s Scientific Manuscript database

Litter size is an economically important trait to producers that is lowly heritable, observable only after considerable investment has been made in gilt development, and responds slowly to selection. Ovulation rate, a component trait of litter size, is moderately heritable, sex limited, and should r...

A Typology of Mixed Methods Sampling Designs in Social Science Research

ERIC Educational Resources Information Center

Onwuegbuzie, Anthony J.; Collins, Kathleen M. T.

2007-01-01

This paper provides a framework for developing sampling designs in mixed methods research. First, we present sampling schemes that have been associated with quantitative and qualitative research. Second, we discuss sample size considerations and provide sample size recommendations for each of the major research designs for quantitative and…

76 FR 72461 - Proposed Extension of Existing Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-23

... size, employee benefits and overhead. In addition, approximately 1,500 broker-dealers must comply with... work-year and multiplied by 2.93 to account for bonuses, firm size, employee benefits and overhead. The... techniques or other forms of information technology. Consideration will be given to comments and suggestions...

Nonword Reading across Orthographies: How Flexible Is the Choice of Reading Units?

ERIC Educational Resources Information Center

Goswami, Usha; Ziegler, Johannes C.; Dalton, Louise; Schnieder, Wolfgang

2003-01-01

Used cross-language blocking experiments to test the hypothesis that children learning to read inconsistent orthographies would show considerable flexibility in making use of spelling-sound correspondences at different unit sizes, whereas children learning to read consistent orthographies should mainly employ small-size grapheme-phoneme…

50 CFR 635.20 - Size limits.

Code of Federal Regulations, 2010 CFR

2010-10-01

... damaged by shark bites may be retained only if the length of the remainder of the fish is equal to or... after consideration of additional scientific information and fish measurement data, and will be made... otherwise adjusted. (e) Sharks. The following size limits change depending on the species being caught and...

General linear model-predicted and observed toxicity of three organo-coated silver nanoparticles: Impacts of particle size, surface charge and dose

EPA Science Inventory

Intrinsic to the myriad of nano-enabled products are atomic-size multifunctional engineered nanomaterials, which upon release contaminate the environments, raising considerable health and safety concerns. Despite global research efforts, mechanism underlying nanotoxicity has rema...

Designing the X-Ray Microcalorimeter Spectrometer for Optimal Science Return

NASA Technical Reports Server (NTRS)

Ptak, Andrew; Bandler, Simon R.; Bookbinder, Jay; Kelley, Richard L.; Petre, Robert; Smith, Randall K.; Smith, Stephen

2013-01-01

Recent advances in X-ray microcalorimeters enable a wide range of possible focal plane designs for the X-ray Microcalorimeter Spectrometer (XMS) instrument on the future Advanced X-ray Spectroscopic Imaging Observatory (AXSIO) or X-ray Astrophysics Probe (XAP). Small pixel designs (75 microns) oversample a 5-10" PSF by a factor of 3-6 for a 10 m focal length, enabling observations at both high count rates and high energy resolution. Pixel designs utilizing multiple absorbers attached to single transition-edge sensors can extend the focal plane to cover a significantly larger field of view, albeit at a cost in maximum count rate and energy resolution. Optimizing the science return for a given cost and/or complexity is therefore a non-trivial calculation that includes consideration of issues such as the mission science drivers, likely targets, mirror size, and observing efficiency. We present a range of possible designs taking these factors into account and their impacts on the science return of future large effective-area X-ray spectroscopic missions.

The impact of the economic crisis on occupational injuries.

PubMed

de la Fuente, Verónica Sedano; López, Miguel A Camino; González, Ignacio Fontaneda; Alcántara, Oscar J González; Ritzel, Dale O

2014-02-01

The potential influence of the current economic crisis on occupational accident rates and accident severity is studied in an analysis of all workplace accidents that occurred in Spain throughout the period 2000-2009. The investigation confirms that occupational accidents in Spain are affected by the current economic crisis, which has provoked a sharp fall in both the number of accidents and the probability of having one. This may be justified by certain factors such as age, gender, length of service, size of the firm, and the employment stability of the injured worker. The influence of these factors is analyzed. The economic crises seems to provoke a sort of "natural selection" in the labor market and only the best adapted tend to remain (older workers, with more experience, a higher percentage of women, more workers in larger companies and permanent contracts), all of which means that the probability of workers having an injury is considerably reduced. Copyright © 2013 Elsevier Ltd and National Safety Council. All rights reserved.

Relationship between microstructure and mechanical properties of Alloy 690 tubes for steam generators

NASA Astrophysics Data System (ADS)

Diano, P.; Muggeo, A.; Van Duysen, J. C.; Guttmann, M.

1989-12-01

Alloy 690 is used to replace Alloy 600 for the fabrication of tubes for steam generators of french pressurized water nuclear reactors. In order to reduce the dispersion in tensile properties observed for the first Alloy 690 industrial tubes, and which had already been noticed for Alloy 600, a joint research programme has been carried out by Electricité de France (Département Etude des Matériaux) and Valinox Montbard. The dispersion in the tensile properties of the first industrial Alloy 690 tubes for PWR steam generators arises from two main factors: - a grain size dispersion which is in particular controlled by the carbon content and by the final heat treatment, - differences in the degree of strain hardening induced by the straightening process with rollers. An improvement of the fabrication processes which have an influence on these two factors has allowed to reduce considerably the dispersion of the tensile properties of the more recent series of tubes.

Analyzing seasonal patterns of wildfire exposure factors in Sardinia, Italy.

PubMed

Salis, Michele; Ager, Alan A; Alcasena, Fermin J; Arca, Bachisio; Finney, Mark A; Pellizzaro, Grazia; Spano, Donatella

2015-01-01

In this paper, we applied landscape scale wildfire simulation modeling to explore the spatiotemporal patterns of wildfire likelihood and intensity in the island of Sardinia (Italy). We also performed wildfire exposure analysis for selected highly valued resources on the island to identify areas characterized by high risk. We observed substantial variation in burn probability, fire size, and flame length among time periods within the fire season, which starts in early June and ends in late September. Peak burn probability and flame length were observed in late July. We found that patterns of wildfire likelihood and intensity were mainly related to spatiotemporal variation in ignition locations, fuel moisture, and wind vectors. Our modeling approach allowed consideration of historical patterns of winds, ignition locations, and live and dead fuel moisture on fire exposure factors. The methodology proposed can be useful for analyzing potential wildfire risk and effects at landscape scale, evaluating historical changes and future trends in wildfire exposure, as well as for addressing and informing fuel management and risk mitigation issues.

Personal and Professional Characteristics of Music Educators: One Size Does Not Fit All.

PubMed

Doherty, Mary Lynn; van Mersbergen, Miriam

2017-01-01

The prevalence of voice disorders among various educator groups is well known, and voice disorders among music educators are higher than the general classroom educators. Music educators vary with respect to behavioral and personality factors, personal characteristics, type of music taught, job-specific environment, and governmental professional expectations. This study aims to identify risk factors for voice disorders in a heterogeneous population of music educators. An online survey was conducted with 213 respondents. Survey questions addressed demographics, level of education, years of music teaching experience, specialty training, primary teaching assignments and instrument, vocal health behaviors, and diagnoses of voice disorders. Summary statistics and group comparisons are reported. Those whose primary instrument was voice reported a greater frequency of voice disorders. Female and older music educators also had a higher prevalence of voice disorders. Music educators are a heterogeneous group of individuals who require more careful consideration in the prevention and treatment of occupational voice problems. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Personalising exercise recommendations for brain health: considerations and future directions.

PubMed

Barha, Cindy K; Galea, Liisa A; Nagamatsu, Lindsay S; Erickson, Kirk I; Liu-Ambrose, Teresa

2017-04-01

The societal value of strategies that delay the onset and progression of dementia cannot be overstated. Physical activity-unstructured and structured-is a promising, cost-effective strategy for the promotion of brain health. However, a large degree of variation exists in its efficacy. Therefore, to increase its utility as 'medication' for healthy cognitive ageing, it is imperative to identify key moderators and mediators of the positive effects of targeted exercise training on brain health. In this commentary, we focus on the type of targeted exercise training, the determinants of individual variation, including biological sex and genotypic factors, and the mechanisms by which exercise exerts its influence on the brain. We argue that a better understanding of these factors will allow for evidence-based, personalised, tailored exercise recommendations that go beyond the one-size-fits-all approach to successfully combat dementia. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Integrative assessment of multiple pesticides as risk factors for non-Hodgkin's lymphoma among men.

PubMed

De Roos, A J; Zahm, S H; Cantor, K P; Weisenburger, D D; Holmes, F F; Burmeister, L F; Blair, A

2003-09-01

An increased rate of non-Hodgkin's lymphoma (NHL) has been repeatedly observed among farmers, but identification of specific exposures that explain this observation has proven difficult. During the 1980s, the National Cancer Institute conducted three case-control studies of NHL in the midwestern United States. These pooled data were used to examine pesticide exposures in farming as risk factors for NHL in men. The large sample size (n = 3417) allowed analysis of 47 pesticides simultaneously, controlling for potential confounding by other pesticides in the model, and adjusting the estimates based on a prespecified variance to make them more stable. Reported use of several individual pesticides was associated with increased NHL incidence, including organophosphate insecticides coumaphos, diazinon, and fonofos, insecticides chlordane, dieldrin, and copper acetoarsenite, and herbicides atrazine, glyphosate, and sodium chlorate. A subanalysis of these "potentially carcinogenic" pesticides suggested a positive trend of risk with exposure to increasing numbers. Consideration of multiple exposures is important in accurately estimating specific effects and in evaluating realistic exposure scenarios.

Utility of combinations of biomarkers, cognitive markers, and risk factors to predict conversion from mild cognitive impairment to Alzheimer disease in patients in the Alzheimer's disease neuroimaging initiative.

PubMed

Gomar, Jesus J; Bobes-Bascaran, Maria T; Conejero-Goldberg, Concepcion; Davies, Peter; Goldberg, Terry E

2011-09-01

Biomarkers have become increasingly important in understanding neurodegenerative processes associated with Alzheimer disease. Markers include regional brain volumes, cerebrospinal fluid measures of pathological Aβ1-42 and total tau, cognitive measures, and individual risk factors. To determine the discriminative utility of different classes of biomarkers and cognitive markers by examining their ability to predict a change in diagnostic status from mild cognitive impairment to Alzheimer disease. Longitudinal study. We analyzed the Alzheimer's Disease Neuroimaging Initiative database to study patients with mild cognitive impairment who converted to Alzheimer disease (n = 116) and those who did not convert (n = 204) within a 2-year period. We determined the predictive utility of 25 variables from all classes of markers, biomarkers, and risk factors in a series of logistic regression models and effect size analyses. The Alzheimer's Disease Neuroimaging Initiative public database. Primary outcome measures were odds ratios, pseudo- R(2)s, and effect sizes. In comprehensive stepwise logistic regression models that thus included variables from all classes of markers, the following baseline variables predicted conversion within a 2-year period: 2 measures of delayed verbal memory and middle temporal lobe cortical thickness. In an effect size analysis that examined rates of decline, change scores for biomarkers were modest for 2 years, but a change in an everyday functional activities measure (Functional Assessment Questionnaire) was considerably larger. Decline in scores on the Functional Assessment Questionnaire and Trail Making Test, part B, accounted for approximately 50% of the predictive variance in conversion from mild cognitive impairment to Alzheimer disease. Cognitive markers at baseline were more robust predictors of conversion than most biomarkers. Longitudinal analyses suggested that conversion appeared to be driven less by changes in the neurobiologic trajectory of the disease than by a sharp decline in functional ability and, to a lesser extent, by declines in executive function.

Dead or Alive? Factors Affecting the Survival of Victims during Attacks by Saltwater Crocodiles (Crocodylus porosus) in Australia.

PubMed

Fukuda, Yusuke; Manolis, Charlie; Saalfeld, Keith; Zuur, Alain

2015-01-01

Conflicts between humans and crocodilians are a widespread conservation challenge and the number of crocodile attacks is increasing worldwide. We identified the factors that most effectively decide whether a victim is injured or killed in a crocodile attack by fitting generalized linear models to a 42-year dataset of 87 attacks (27 fatal and 60 non-fatal) by saltwater crocodiles (Crocodylus porosus) in Australia. The models showed that the most influential factors were the difference in body mass between crocodile and victim, and the position of victim in relation to the water at the time of an attack. In-water position (for diving, swimming, and wading) had a higher risk than on-water (boating) or on-land (fishing, and hunting near the water's edge) positions. In the in-water position a 75 kg person would have a relatively high probability of survival (0.81) if attacked by a 300 cm crocodile, but the probability becomes much lower (0.17) with a 400 cm crocodile. If attacked by a crocodile larger than 450 cm, the survival probability would be extremely low (<0.05) regardless of the victim's size. These results indicate that the main cause of death during a crocodile attack is drowning and larger crocodiles can drag a victim more easily into deeper water. A higher risk associated with a larger crocodile in relation to victim's size is highlighted by children's vulnerability to fatal attacks. Since the first recently recorded fatal attack involving a child in 2006, six out of nine fatal attacks (66.7%) involved children, and the average body size of crocodiles responsible for these fatal attacks was considerably smaller (384 cm, 223 kg) than that of crocodiles that killed adults (450 cm, 324 kg) during the same period (2006-2014). These results suggest that culling programs targeting larger crocodiles may not be an effective management option to improve safety for children.

Dead or Alive? Factors Affecting the Survival of Victims during Attacks by Saltwater Crocodiles (Crocodylus porosus) in Australia

PubMed Central

Fukuda, Yusuke

2015-01-01

Conflicts between humans and crocodilians are a widespread conservation challenge and the number of crocodile attacks is increasing worldwide. We identified the factors that most effectively decide whether a victim is injured or killed in a crocodile attack by fitting generalized linear models to a 42-year dataset of 87 attacks (27 fatal and 60 non-fatal) by saltwater crocodiles (Crocodylus porosus) in Australia. The models showed that the most influential factors were the difference in body mass between crocodile and victim, and the position of victim in relation to the water at the time of an attack. In-water position (for diving, swimming, and wading) had a higher risk than on-water (boating) or on-land (fishing, and hunting near the water's edge) positions. In the in-water position a 75 kg person would have a relatively high probability of survival (0.81) if attacked by a 300 cm crocodile, but the probability becomes much lower (0.17) with a 400 cm crocodile. If attacked by a crocodile larger than 450 cm, the survival probability would be extremely low (<0.05) regardless of the victim’s size. These results indicate that the main cause of death during a crocodile attack is drowning and larger crocodiles can drag a victim more easily into deeper water. A higher risk associated with a larger crocodile in relation to victim’s size is highlighted by children’s vulnerability to fatal attacks. Since the first recently recorded fatal attack involving a child in 2006, six out of nine fatal attacks (66.7%) involved children, and the average body size of crocodiles responsible for these fatal attacks was considerably smaller (384 cm, 223 kg) than that of crocodiles that killed adults (450 cm, 324 kg) during the same period (2006–2014). These results suggest that culling programs targeting larger crocodiles may not be an effective management option to improve safety for children. PMID:25961294

Human factors considerations for integrating traffic information on airport moving maps.

DOT National Transportation Integrated Search

2011-05-01

The purpose of this research effort was to identify human factors considerations in the integration of traffic information and surface indications and alerts for runway status on airport moving maps for flight deck displays. The information is primar...

Demographics of the spawning aggregations of four catostomid species in the Savannah River, South Carolina and Georgia, USA

USGS Publications Warehouse

Grabowski, T.B.; Ratterman, N.L.; Isely, J.J.

2008-01-01

Differences in the life history strategies employed by otherwise ecologically similar species of a fish assemblage may be an important factor in the coexistence of these species and is an essential consideration in the conservation and management of these assemblages. We collected scales to determine age and growth of four species of the catostomid assemblage (northern hogsucker Hypentelium nigricans, spotted sucker Minytrema melanops, notchlip redhorse Moxostoma collapsum and robust redhorse Moxostoma robustum) of the Savannah River, Georgia-South Carolina in spring 2004 and 2005. Robust redhorse was the largest species; reaching sexual maturity at an older age and growing faster as a juvenile than the other species. Spotted sucker did not achieve the same size as robust redhorse, but reached sexual maturity at younger ages. Notchlip redhorse was intermediate between the abovementioned two species in age at maturity and size. Northern hogsucker was the smallest species of the assemblage and reached the sexual maturity at the age of three. Both robust redhorse and spotted sucker were sexually dimorphic in size-at-age. The range of life history strategies employed by Savannah River catostomids encompasses the range of life history strategies exhibited within the family as a whole. ?? 2007 Blackwell Munksgaard.

Classification of sea lamprey (Petromyzon marinus) attack marks on Great Lakes lake trout (Salvelinus namaycush)

USGS Publications Warehouse

King, Everett Louis

1980-01-01

Criteria for the classification of marks inflicted by sea lamprey (Petromyzon marinus) into nine categories were developed from laboratory studies in an attempt to refine the classification system used in field assessment work. These criteria were based on characteristics of the attachment site that could be identified under field conditions by unaided visual means and by touching the attachment site. Healing of these marks was somewhat variable and was influenced by the size of lamprey, duration of attachment, severity of the wound at lamprey detachment, season and water temperature, and by other less obvious factors. Even under laboratory conditions staging of some wounds was difficult, especially at low water temperatures. If these criteria are to be used effectively and with precision in the field, close examination of individual fish may be required. If the feeding and density of specific year-classes of sea lampreys are to be accurately assessed on an annual basis, close attention to the wound size (as it reflects the size of the lamprey's oral disc) and character of wounds on fish will be required as well as consideration of the season of the year in which they are observed.Key words: sea lamprey, attack marks, lake trout, Great Lakes

Height-related trends in leaf xylem anatomy and shoot hydraulic characteristics in a tall conifer: safety versus efficiency in water transport

Treesearch

D.R. Woodruff; F.C. Meinzer; B. Lachenbruch

2008-01-01

Growth and aboveground biomass accumulation follow a common pattern as tree size increases, with productivity peaking when leaf area reaches its maximum and then declining as tree age and size increase. Age- and size-related declines in forest productivity are major considerations in setting the rotational age of commercial forests, and relate to issues of carbon...

Can't see the forest for the rice: factors influencing spatial variations in the density of trees in paddy fields in northeast Thailand.

PubMed

Watanabe, Moriaki; Vityakon, Patma; Rambo, A Terry

2014-02-01

The widespread presence of trees in paddy fields is a unique feature of Northeast Thailand's agricultural landscape. A survey of spatial variability in the density of trees in paddy fields in the Northeast Region was conducted utilizing high resolution satellite images and found that the mean density in the whole region was 12.1 trees/ha (varying from a high of 44.6 trees/ha to a low of 0.8 trees/ha). In general, tree densities are higher in the southeastern part of the region and much lower in the northern central part. Tree density was influenced by multiple factors including: (1) the history of land development, with more recently developed paddy fields having higher densities, (2) topography, with fields located at higher topographical positions having a higher mean density of trees, (3) access to natural forest resources, with fields in areas located close to natural forests having higher densities, (4) amount of annual rainfall, with fields in areas with higher average annual rainfall having higher tree densities, and (5) landholding size, with fields in areas with larger-sized landholdings having more trees. However, there is a considerable extent of co-variation among these factors. Although trees remain an important element of the paddy field landscape in the Northeast, it appears that their density has been declining in recent years. If this trend continues, then the vast "invisible forest" represented by trees in paddy fields may truly disappear, with negative consequences for the villagers' livelihoods, biodiversity conservation, and carbon sequestration in the rural ecosystem.

The Influence of Drivers and Barriers on Urban Adaptation and Mitigation Plans—An Empirical Analysis of European Cities

PubMed Central

Reckien, Diana; Flacke, Johannes

2015-01-01

Cities are recognised as key players in global adaptation and mitigation efforts because the majority of people live in cities. However, in Europe, which is highly urbanized and one of the most advanced regions in terms of environmental policies, there is considerable diversity in the regional distribution, ambition and scope of climate change responses. This paper explores potential factors contributing to such diversity in 200 large and medium-sized cities across 11 European countries. We statistically investigate institutional, socio-economic, environmental and vulnerability characteristics of cities as potential drivers of or barriers to the development of urban climate change plans. Our results show that factors such as membership of climate networks, population size, GDP per capita and adaptive capacity act as drivers of mitigation and adaptation plans. By contrast, factors such as the unemployment rate, warmer summers, proximity to the coast and projected exposure to future climate impacts act as barriers. We see that, overall, it is predominantly large and prosperous cities that engage in climate planning, while vulnerable cities and those at risk of severe climate impacts in the future are less active. Our analysis suggests that climate change planning in European cities is not proactive, i.e. not significantly influenced by anticipated future impacts. Instead, we found that the current adaptive capacity of a city significantly relates to climate planning. Along with the need to further explore these relations, we see a need for more economic and institutional support for smaller and less resourceful cities and those at high risk from climate change impacts in the future. PMID:26317420

A meta-analysis of outcomes of hydration intervention on phonation threshold pressure.

PubMed

Leydon, Ciara; Wroblewski, Marcin; Eichorn, Naomi; Sivasankar, Mahalakshmi

2010-11-01

Vocal fold hydration is purported to promote optimal biomechanical characteristics of vocal fold mucosa, increase efficiency of vocal fold oscillation, and enhance voice quality. The purpose of this work was to determine the magnitude and consistency of the effect of vocal fold hydration on vocal fold function across published clinical studies. We completed a comprehensive meta-analysis of the effects of superficial and systemic vocal fold hydration on phonation threshold pressure (PTP), a measure of efficiency of voice production. We identified 34 studies that examined the effects of hydration on vocal function. Of these studies, 14 examined the effects of hydration on PTP. Nine of these articles met the criteria for inclusion in this analysis. We observed an average effect size of 0.33, indicating that, overall, hydration treatment demonstrated a tendency to reduce PTP. However, this decrease in phonatory effort did not reach significance at the 95% confidence level. The effects of hydration intervention varied considerably across studies (-0.19 to 3.96). We considered that two factors, pitch level of the task and vocal health of participants, may have contributed to this variability in findings. However, our analysis found that these factors could not account for differences in effect size. To understand the variability in outcomes across studies, the role of factors that may impact the effects of hydration, such as the amount, type, and duration of intervention, must be determined. Only then can we obtain data to guide best clinical practice for protecting and rehabilitating vocal function. Copyright © 2010 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

The Influence of Drivers and Barriers on Urban Adaptation and Mitigation Plans-An Empirical Analysis of European Cities.

PubMed

Reckien, Diana; Flacke, Johannes; Olazabal, Marta; Heidrich, Oliver

2015-01-01

Cities are recognised as key players in global adaptation and mitigation efforts because the majority of people live in cities. However, in Europe, which is highly urbanized and one of the most advanced regions in terms of environmental policies, there is considerable diversity in the regional distribution, ambition and scope of climate change responses. This paper explores potential factors contributing to such diversity in 200 large and medium-sized cities across 11 European countries. We statistically investigate institutional, socio-economic, environmental and vulnerability characteristics of cities as potential drivers of or barriers to the development of urban climate change plans. Our results show that factors such as membership of climate networks, population size, GDP per capita and adaptive capacity act as drivers of mitigation and adaptation plans. By contrast, factors such as the unemployment rate, warmer summers, proximity to the coast and projected exposure to future climate impacts act as barriers. We see that, overall, it is predominantly large and prosperous cities that engage in climate planning, while vulnerable cities and those at risk of severe climate impacts in the future are less active. Our analysis suggests that climate change planning in European cities is not proactive, i.e. not significantly influenced by anticipated future impacts. Instead, we found that the current adaptive capacity of a city significantly relates to climate planning. Along with the need to further explore these relations, we see a need for more economic and institutional support for smaller and less resourceful cities and those at high risk from climate change impacts in the future.

Systematic review and meta-analysis of prevalence studies in transsexualism.

PubMed

Arcelus, J; Bouman, W P; Van Den Noortgate, W; Claes, L; Witcomb, G; Fernandez-Aranda, F

2015-09-01

Over the last 50 years, several studies have provided estimates of the prevalence of transsexualism. The variation in reported prevalence is considerable and may be explained by factors such as the methodology and diagnostic classification used and the year and country in which the studies took place. Taking these into consideration, this study aimed to critically and systematically review the available literature measuring the prevalence of transsexualism as well as performing a meta-analysis using the available data. Databases were systematically searched and 1473 possible studies were identified. After initial scrutiny of the article titles and removal of those not relevant, 250 studies were selected for further appraisal. Of these, 211 were excluded after reading the abstracts and a further 18 after reading the full article. This resulted in 21 studies on which to perform a systematic review, with only 12 having sufficient data for meta-analysis. The primary data of the epidemiological studies were extracted as raw numbers. An aggregate effect size, weighted by sample size, was computed to provide an overall effect size across the studies. Risk ratios and 95% confidence intervals (CIs) were calculated. The relative weighted contribution of each study was also assessed. The overall meta-analytical prevalence for transsexualism was 4.6 in 100,000 individuals; 6.8 for trans women and 2.6 for trans men. Time analysis found an increase in reported prevalence over the last 50 years. The overall prevalence of transsexualism reported in the literature is increasing. However, it is still very low and is mainly based on individuals attending clinical services and so does not provide an overall picture of prevalence in the general population. However, this study should be considered as a starting point and the field would benefit from more rigorous epidemiological studies acknowledging current changes in the classification system and including different locations worldwide. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Accuracy of stream habitat interpolations across spatial scales

USGS Publications Warehouse

Sheehan, Kenneth R.; Welsh, Stuart A.

2013-01-01

Stream habitat data are often collected across spatial scales because relationships among habitat, species occurrence, and management plans are linked at multiple spatial scales. Unfortunately, scale is often a factor limiting insight gained from spatial analysis of stream habitat data. Considerable cost is often expended to collect data at several spatial scales to provide accurate evaluation of spatial relationships in streams. To address utility of single scale set of stream habitat data used at varying scales, we examined the influence that data scaling had on accuracy of natural neighbor predictions of depth, flow, and benthic substrate. To achieve this goal, we measured two streams at gridded resolution of 0.33 × 0.33 meter cell size over a combined area of 934 m2 to create a baseline for natural neighbor interpolated maps at 12 incremental scales ranging from a raster cell size of 0.11 m2 to 16 m2 . Analysis of predictive maps showed a logarithmic linear decay pattern in RMSE values in interpolation accuracy for variables as resolution of data used to interpolate study areas became coarser. Proportional accuracy of interpolated models (r2 ) decreased, but it was maintained up to 78% as interpolation scale moved from 0.11 m2 to 16 m2 . Results indicated that accuracy retention was suitable for assessment and management purposes at various scales different from the data collection scale. Our study is relevant to spatial modeling, fish habitat assessment, and stream habitat management because it highlights the potential of using a single dataset to fulfill analysis needs rather than investing considerable cost to develop several scaled datasets.

Health Risk Assessment of Lead Ingestion Exposure by Particle Sizes in Crumb Rubber on Artificial Turf Considering Bioavailability

PubMed Central

Kim, Sunduk; Yang, Ji-Yeon; Kim, Ho-Hyun; Yeo, In-Young; Shin, Dong-Chun

2012-01-01

Objectives The purpose of this study was to assess the risk of ingestion exposure of lead by particle sizes of crumb rubber in artificial turf filling material with consideration of bioavailability. Methods This study estimated the ingestion exposure by particle sizes (more than 250 um or less than 250 um) focusing on recyclable ethylene propylene diene monomer crumb rubber being used as artificial turf filling. Analysis on crumb rubber was conducted using body ingestion exposure estimate method in which total content test method, acid extraction method and digestion extraction method are reflected. Bioavailability which is a calibrating factor was reflected in ingestion exposure estimate method and applied in exposure assessment and risk assessment. Two methods using acid extraction and digestion extraction concentration were compared and evaluated. Results As a result of the ingestion exposure of crumb rubber material, the average lead exposure amount to the digestion extraction result among crumb rubber was calculated to be 1.56×10-4 mg/kg-day for low grade elementary school students and 4.87×10-5 mg/kg-day for middle and high school students in 250 um or less particle size, and that to the acid extraction result was higher than the digestion extraction result. Results of digestion extraction and acid extraction showed that the hazard quotient was estimated by about over 2 times more in particle size of lower than 250 um than in higher than 250 um. There was a case of an elementary school student in which the hazard quotient exceeded 0.1. Conclusions Results of this study confirm that the exposure of lead ingestion and risk level increases as the particle size of crumb rubber gets smaller. PMID:22355803

ICP-MS based methods to characterize nanoparticles of TiO2 and ZnO in sunscreens with focus on regulatory and safety issues.

PubMed

Bocca, Beatrice; Caimi, Stefano; Senofonte, Oreste; Alimonti, Alessandro; Petrucci, Francesco

2018-07-15

This study sought to develop analytical methods to characterize titanium dioxide (TiO 2 ) and zinc oxide (ZnO) nanoparticles (NPs), including the particle size distribution and concentration, in cream and spray sunscreens with different sun protection factor (SPF). The Single Particle Inductively Coupled Plasma-Mass Spectrometry (SP ICP-MS) was used as screening and fast method to determine particles size and number. The Asymmetric Flow-Field Flow Fractionation (AF4-FFF) as a pre-separation technique was on-line coupled to the Multi-Angle Light Scattering (MALS) and ICP-MS to determine particle size distributions and size dependent multi-elemental concentration. Both methods were optimized in sunscreens in terms of recovery, repeatability, limit of detection and linear dynamic range. Results showed that sunscreens contained TiO 2 particles with an average size of ≤107 nm and also a minor number of ZnO particles sized ≤98 nm. The higher fraction of particles <100 nm was observed in sunscreens with SPF 50+ (ca. 80%); the lower percentage (12-35%) in sunscreens with lower SPF values. Also the higher TiO 2 (up to 24% weight) and ZnO (ca. 0.25% weight) concentrations were found in formulations of SPF 50+. Creamy sunscreens could be considered safe containing TiO 2 and ZnO NPs less than the maximum allowable concentration of 25% weight as set by the European legislation. On the contrary, spray products required additional considerations with regard to the potential inhalation of NPs. The developed methods can contribute to the actual demand for regulatory control and safety assessment of metallic NPs in consumers' products. Copyright © 2018 Elsevier B.V. All rights reserved.

A scaling law for the local CHF on the external bottom side of a fully submerged reactor vessel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheung, F.B.; Haddad, K.H.; Liu, Y.C.

1997-02-01

A scaling law for estimating the local critical heat flux on the outer surface of a heated hemispherical vessel that is fully submerged in water has been developed from the results of an advanced hydrodynamic CHF model for pool boiling on a downward facing curved heating surface. The scaling law accounts for the effects of the size of the vessel, the level of liquid subcooling, the intrinsic properties of the fluid, and the spatial variation of the local critical heat flux along the heating surface. It is found that for vessels with diameters considerably larger than the characteristic size ofmore » the vapor masses, the size effect on the local critical heat flux is limited almost entirely to the effect of subcooling associated with the local liquid head. When the subcooling effect is accounted for separately, the local CHF limit is nearly independent of the vessel size. Based upon the scaling law developed in this work, it is possible to merge, within the experimental uncertainties, all the available local CHF data obtained for various vessel sizes under both saturated and subcooled boiling conditions into a single curve. Applications of the scaling law to commercial-size vessels have been made for various system pressures and water levels above the heated vessel. Over the range of conditions explored in this study, the local CHF limit is found to increase by a factor of two or more from the bottom center to the upper edge of the vessel. Meanwhile, the critical heat flux at a given angular position of the heated vessel is also found to increase appreciably with the system pressure and the water level.« less

Lexical development in Korean: vocabulary size, lexical composition, and late talking.

PubMed

Rescorla, Leslie; Lee, Youn Mi Cathy; Lee, Youn Min Cathy; Oh, Kyung Ja; Kim, Young Ah

2013-04-01

In this study, the authors aimed to compare vocabulary size, lexical composition, and late talking in large samples of Korean and U.S. children ages 18-35 months. Data for 2,191 Korean children (211 children recruited "offline" through preschools, and 1,980 recruited "online" via the Internet) and 274 U.S. children were obtained using the Language Development Survey (LDS). Mean vocabulary size was slightly larger in the offline than the online group, but the groups were acquiring almost identical words. Mean vocabulary size did not differ by country; girls and older children had larger vocabularies in both countries. The Korean-U.S. Q correlations for percentage use of LDS words (.53 and .56) indicated considerable concordance across countries in lexical composition. Noun dominance was as large in Korean lexicons as in U.S. lexicons. About half of the most commonly reported words for the Korean and U.S. children were identical. Lexicons of late talkers resembled those of typically developing younger children in the same sample. Despite linguistic and discourse differences between Korean and English, LDS findings indicated considerable cross-linguistic similarity with respect to vocabulary size, lexical composition, and late talking.

Emission characteristics and size distribution of polycyclic aromatic hydrocarbons from coke production in China

NASA Astrophysics Data System (ADS)

Mu, Ling; Peng, Lin; Liu, Xiaofeng; He, Qiusheng; Bai, Huiling; Yan, Yulong; Li, Yinghui

2017-11-01

Coking is regarded as a major source of atmospheric polycyclic aromatic hydrocarbons (PAHs), but few researches have been conducted on the emission characteristics of PAHs from coke production. In this study, emissions of size-segregated particulate matter (PM) and particle-bound PAHs emitted from charging of coal (CC) and pushing of coke (PC) in four typical coke plants were determined. The emission factors on average, sums of CC and PC, were 4.65 mg/kg, 5.96 mg/kg, 19.18 μg/kg and 20.69 μg/kg of coal charged for PM2.1 (≤ 2.1 μm), PM, PAHs in PM2.1 and total-PAHs, respectively. PM and PAHs emission from plants using stamp charging were significantly more than those using top charging. The profile of PAHs in PM with size ≤ 1.4 μm (PM1.4) emitted from CC process were similar with that from PC, however, it revealed obviously different tendency for PAHs in PM with size > 1.4 μm, indicating the different formation mechanism for coarse particles emitted from CC and PC. Size distributions of PM and PAHs indicated that they were primarily connected with PM1.4, and the contributions of PM1.4 to PM and PAHs emitted from the plants using stamp charging were higher than those using top charging. Some improved technology in air-pollution control devices should be considered in coke production in future based on the considerable impacts of PM1.4 and PAHs on human health and ambient air quality.

Adolescent Sexual Health Communication and Condom Use: A Meta-Analysis

PubMed Central

Widman, Laura; Noar, Seth M.; Choukas-Bradley, Sophia; Francis, Diane

2014-01-01

Objective Condom use is critical for the health of sexually active adolescents, and yet many adolescents fail to use condoms consistently. One interpersonal factor that may be key to condom use is sexual communication between sexual partners; however, the association between communication and condom use has varied considerably in prior studies of youth. The purpose of this meta-analysis was to synthesize the growing body of research linking adolescents’ sexual communication to condom use, and to examine several moderators of this association. Methods A total of 41 independent effect sizes from 34 studies with 15,046 adolescent participants (Mage=16.8, age range=12–23) were meta-analyzed. Results Results revealed a weighted mean effect size of the sexual communication-condom use relationship of r = .24, which was statistically heterogeneous (Q=618.86, p<.001, I2 =93.54). Effect sizes did not differ significantly by gender, age, recruitment setting, country of study, or condom measurement timeframe; however, communication topic and communication format were statistically significant moderators (p<.001). Larger effect sizes were found for communication about condom use (r = .34) than communication about sexual history (r = .15) or general safer sex topics (r = .14). Effect sizes were also larger for communication behavior formats (r = .27) and self-efficacy formats (r = .28), than for fear/concern (r = .18), future intention (r = .15), or communication comfort (r = −.15) formats. Conclusions Results highlight the urgency of emphasizing communication skills, particularly about condom use, in HIV/STI prevention work for youth. Implications for the future study of sexual communication are discussed. PMID:25133828

Growth performance and plasma metabolites in juvenile Siberian sturgeon Acipenser baerii (Brandt, 1869) subjected to various feeding strategies at different sizes.

PubMed

Jafari, Naghmeh; Falahatkar, Bahram; Sajjadi, Mir Masoud

2018-06-16

The effect of various feeding strategies was evaluated on growth performance and biochemical parameters in two sizes of Siberian sturgeon (465.75 ± 11.18 and 250.40 ± 12 g) during 45 days. Fish were distributed into six experimental treatments including large fish with satiation feeding (LA), small fish with satiation feeding (SA), large fish with 50% satiation feeding (LR), small fish with 50% satiation feeding (SR), large starved fish (LS), and small starved fish (SS). Differences in final weight between LA and LR treatments were not noticeable, whereas SA and SR treatments showed significant differences. Growth parameters were more affected in small fish. In condition factor and weight gain in starved treatments, a considerable reduction occurred by interaction between feeding strategies and fish size, so the lowest values were obtained in SS treatment. Glucose levels significantly decreased in small fish during the starvation. Interaction between feeding strategy and fish size indicated the highest and lowest albumin level in SA and SS treatment, respectively. Cholesterol, triglyceride, total protein, and globulin showed no significant differences. It can be deduced that small fish are more sensitive to starvation than the large fish. Since glucose and albumin showed significant decrease in starved small fish, these parameters can help to monitor nutritional status and feeding practices. It was indicated that in both sizes of Siberian sturgeon, feeding 50% satiation reduced the food cost without negative impact on physiological condition, and it can be considered as an appropriate strategy to face unfavorable circumstances.

Sleep disturbances as an evidence-based suicide risk factor.

PubMed

Bernert, Rebecca A; Kim, Joanne S; Iwata, Naomi G; Perlis, Michael L

2015-03-01

Increasing research indicates that sleep disturbances may confer increased risk for suicidal behaviors, including suicidal ideation, suicide attempts, and death by suicide. Despite increased investigation, a number of methodological problems present important limitations to the validity and generalizability of findings in this area, which warrant additional focus. To evaluate and delineate sleep disturbances as an evidence-based suicide risk factor, a systematic review of the extant literature was conducted with methodological considerations as a central focus. The following methodologic criteria were required for inclusion: the report (1) evaluated an index of sleep disturbance; (2) examined an outcome measure for suicidal behavior; (3) adjusted for presence of a depression diagnosis or depression severity, as a covariate; and (4) represented an original investigation as opposed to a chart review. Reports meeting inclusion criteria were further classified and reviewed according to: study design and timeframe; sample type and size; sleep disturbance, suicide risk, and depression covariate assessment measure(s); and presence of positive versus negative findings. Based on keyword search, the following search engines were used: PubMed and PsycINFO. Search criteria generated N = 82 articles representing original investigations focused on sleep disturbances and suicide outcomes. Of these, N = 18 met inclusion criteria for review based on systematic analysis. Of the reports identified, N = 18 evaluated insomnia or poor sleep quality symptoms, whereas N = 8 assessed nightmares in association with suicide risk. Despite considerable differences in study designs, samples, and assessment techniques, the comparison of such reports indicates preliminary, converging evidence for sleep disturbances as an empirical risk factor for suicidal behaviors, while highlighting important, future directions for increased investigation.

Risk factors for re-bleeding of aneurysmal subarachnoid hemorrhage: meta-analysis of observational studies.

PubMed

Alfotih, Gobran Taha Ahmed; Li, FangCheng; Xu, XinKe; Zhang, ShangYi

2014-01-01

The mortality of re-bleeding following aneurysmal subarachnoid hemorrhage is high, and surviving patients often have poor clinical condition and worse outcome than patients with a single bleed. In this study, we performed an updated systematic review and meta-analysis to determine the most common risk factors for re-bleeding in this patient population, with the goal of providing neurologists, neurosurgeons, neuro-interventionalists with a simple and fast method to evaluate the re-bleeding risk for aneurysmal subarachnoid hemorrhage. We conducted a thorough meta-analysis of the risk factors associated with re-bleeding or re-rupture of intracranial aneurysms in cases published between 2000 and 2013. Pooled mean difference was calculated for the continuous variables (age), and pooled odds ratio (OR) was calculated for categorical factors. If heterogeneity was significant (p<0.05), a random effect model was applied; otherwise, a fixed model was used. Testing for pooled effects and statistical significance for each potential risk factor were analyzed using Review Manager software. Our literature search identified 174 articles. Of these, only seven retrospective studies met the inclusion criteria. These seven studies consisted of 2470 patients, 283 of which had aneurysmal re-bleeding, resulting in a weighted average rate of re-bleeding of 11.3% with 95% confidence interval [CI]: 10.1-12.6. In this population, sex (OR 1.46; 95% CI: 1.11-1.92), high systolic blood pressure [SBP] (OR 2.52; 95% CI: 1.40-4.53), aneurysm size (OR 3.00; 95% CI: 2.06-4.37), clinical condition (Hunt & Hess) (OR 4.94; 95% CI: 2.29,10.68), and Fisher grade (OR 2.29; 95% CI: 1.45, 3.61) were statistically significant risk factors for re-bleeding. Sex, high SBP, high Fisher grade, aneurysm size larger than 10mm, and poor clinical condition were independent risk factors for aneurysmal re-bleeding. The importance of early aneurysm intervention and careful consideration of patient risk factors should be emphasized to eliminate the risk of re-bleeding and poor outcome. Copyright © 2014 Polish Neurological Society. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

Preliminary results from multiparameter airborne rain radar measurement in the western Pacific

NASA Technical Reports Server (NTRS)

Kumagai, Hiroshi; Meneghini, Robert; Kozu, Toshiaki

1993-01-01

Preliminary results are presented from multiparameter airborne radar measurements of tropical storms. The experiment was conducted in the western Pacific in September 1990 with the NASA DC-8 aircraft that was equipped with a dual-wavelength radar at X and Ka bands and several microwave radiometers. The modification to dual-polarization at X-band radar enabled measurements of the linear depolarization ratio (LDR). Vertical profiles of dual-polarization and dual-frequency observables for an example of stratiform rain and three examples of convective rain cells are examined. It is shown that at nadir incidence the LDR measurement often can be used to distinguish the phase states of the hydrometeors and to identify the melting layer. In addition to the information concerning particle shape and orientation from LDR, the ratio of the radar reflectivity factors in two frequency bands (X and Ka bands) provides insight into particle size. The capabilities of dual-wavelength and dual-polarization radar in the identification of particle size and phase will be important considerations in the design of future spaceborne weather radars.

Variations in clinicopathologic characteristics of thyroid cancer among racial ethnic groups: analysis of a large public city hospital and the SEER database.

PubMed

Moo-Young, Tricia A; Panergo, Jessel; Wang, Chih E; Patel, Subhash; Duh, Hong Yan; Winchester, David J; Prinz, Richard A; Fogelfeld, Leon

2013-11-01

Clinicopathologic variables influence the treatment and prognosis of patients with thyroid cancer. A retrospective analysis of public hospital thyroid cancer database and the Surveillance, Epidemiology and End Results 17 database was conducted. Demographic, clinical, and pathologic data were compared across ethnic groups. Within the public hospital database, Hispanics versus non-Hispanic whites were younger and had more lymph node involvement (34% vs 17%, P < .001). Median tumor size was not statistically different across ethnic groups. Similar findings were demonstrated within the Surveillance, Epidemiology and End Results database. African Americans aged <45 years had the largest tumors but were least likely to have lymph node involvement. Asians had the most stage IV disease despite having no differences in tumor size, lymph node involvement, and capsular invasion. There is considerable variability in the clinical presentation of thyroid cancer across ethnic groups. Such disparities persist within an equal-access health care system. These findings suggest that factors beyond socioeconomics may contribute to such differences. Copyright © 2013 Elsevier Inc. All rights reserved.

Aerosol-Cloud Interactions and Cloud Microphysical Properties in the Asir Region of Saudi Arabia

NASA Astrophysics Data System (ADS)

Kucera, P. A.; Axisa, D.; Burger, R. P.; Li, R.; Collins, D. R.; Freney, E. J.; Buseck, P. R.

2009-12-01

In recent advertent and inadvertent weather modification studies, a considerable effort has been made to understand the impact of varying aerosol properties and concentration on cloud properties. Significant uncertainties exist with aerosol-cloud interactions for which complex microphysical processes link the aerosol and cloud properties. Under almost all environmental conditions, increased aerosol concentrations within polluted air masses will enhance cloud droplet concentration relative to that in unperturbed regions. The interaction between dust particles and clouds are significant, yet the conditions in which dust particles become cloud condensation nuclei (CCN) are uncertain. In order to quantify this aerosol effect on clouds and precipitation, a field campaign was launched in the Asir region, located adjacent to the Red Sea in the southwest region of Saudi Arabia. Ground measurements of aerosol size distributions, hygroscopic growth factors, CCN concentrations as well as aircraft measurements of cloud hydrometeor size distributions were observed in the Asir region in August 2009. The presentation will include a summary of the analysis and results with a focus on aerosol-cloud interactions and cloud microphysical properties observed during the convective season in the Asir region.

Review of relationship between indoor and outdoor particles: I/O ratio, infiltration factor and penetration factor

NASA Astrophysics Data System (ADS)

Chen, Chun; Zhao, Bin

2011-01-01

Epidemiologic evidence indicates a relationship between outdoor particle exposure and adverse health effects, while most people spend 85-90% of their time indoors, thus understanding the relationship between indoor and outdoor particles is quite important. This paper aims to provide an up-to-date revision for both experiment and modeling on relationship between indoor and outdoor particles. The use of three different parameters: indoor/outdoor (I/O) ratio, infiltration factor and penetration factor, to assess the relationship between indoor and outdoor particles were reviewed. The experimental data of the three parameters measured both in real houses and laboratories were summarized and analyzed. The I/O ratios vary considerably due to the difference in size-dependent indoor particle emission rates, the geometry of the cracks in building envelopes, and the air exchange rates. Thus, it is difficult to draw uniform conclusions as detailed information, which make I/O ratio hardly helpful for understanding the indoor/outdoor relationship. Infiltration factor represents the equilibrium fraction of ambient particles that penetrates indoors and remains suspended, which avoids the mixture with indoor particle sources. Penetration factor is the most relevant parameter for the particle penetration mechanism through cracks and leaks in the building envelope. We investigate the methods used in previously published studies to both measure and model the infiltration and penetration factors. We also discuss the application of the penetration factor models and provide recommendations for improvement.

Skier triggering of backcountry avalanches with skilled route selection

NASA Astrophysics Data System (ADS)

Sinickas, Alexandra; Haegeli, Pascal; Jamieson, Bruce

2015-04-01

Jamieson (2009) provided numerical estimates for the baseline probabilities of triggering an avalanche by a backcountry skier making fresh tracks without skilled route selection as a function of the North American avalanche danger scale (i.e., hazard levels Low, Moderate, Considerable, High and Extreme). Using the results of an expert survey, he showed that triggering probabilities while skiing directly up, down or across a trigger zone without skilled route selection increase roughly by a factor of 10 with each step of the North American avalanche danger scale (i.e. hazard level). The objective of the present study is to examine the effect of skilled route selection on the relationship between triggering probability and hazard level. To assess the effect of skilled route selection on triggering probability by hazard level, we analysed avalanche hazard assessments as well as reports of skiing activity and triggering of avalanches from 11 Canadian helicopter and snowcat operations during two winters (2012-13 and 2013-14). These reports were submitted to the daily information exchange among Canadian avalanche safety operations, and reflect professional decision-making and route selection practices of guides leading groups of skiers. We selected all skier-controlled or accidentally triggered avalanches with a destructive size greater than size 1 according to the Canadian avalanche size classification, triggered by any member of a guided group (guide or guest). These operations forecast the avalanche hazard daily for each of three elevation bands: alpine, treeline and below treeline. In contrast to the 2009 study, an exposure was defined as a group skiing within any one of the three elevation bands, and consequently within a hazard rating, for the day (~4,300 ratings over two winters). For example, a group that skied below treeline (rated Moderate) and treeline (rated Considerable) in one day, would receive one count for exposure to Moderate hazard, and one count for exposure to Considerable hazard. While the absolute values for triggering probability cannot be compared to the 2009 study because of different definitions of exposure, our preliminary results suggest that with skilled route selection the triggering probability is similar all hazard levels, except for extreme for which there are few exposures. This means that the guiding teams of backcountry skiing operations effectively control the hazard from triggering avalanches with skilled route selection. Groups were exposed relatively evenly to Low hazard (1275 times or 29% of total exposure), Moderate hazard (1450 times or 33 %) and Considerable hazard (1215 times or 28 %). At higher levels, the exposure reduced to roughly 380 times (9 % of total exposure) to High hazard, and only 13 times (0.3 %) to Extreme hazard. We assess the sensitivity of the results to some of our key assumptions.

Can statistic adjustment of OR minimize the potential confounding bias for meta-analysis of case-control study? A secondary data analysis.

PubMed

Liu, Tianyi; Nie, Xiaolu; Wu, Zehao; Zhang, Ying; Feng, Guoshuang; Cai, Siyu; Lv, Yaqi; Peng, Xiaoxia

2017-12-29

Different confounder adjustment strategies were used to estimate odds ratios (ORs) in case-control study, i.e. how many confounders original studies adjusted and what the variables are. This secondary data analysis is aimed to detect whether there are potential biases caused by difference of confounding factor adjustment strategies in case-control study, and whether such bias would impact the summary effect size of meta-analysis. We included all meta-analyses that focused on the association between breast cancer and passive smoking among non-smoking women, as well as each original case-control studies included in these meta-analyses. The relative deviations (RDs) of each original study were calculated to detect how magnitude the adjustment would impact the estimation of ORs, compared with crude ORs. At the same time, a scatter diagram was sketched to describe the distribution of adjusted ORs with different number of adjusted confounders. Substantial inconsistency existed in meta-analysis of case-control studies, which would influence the precision of the summary effect size. First, mixed unadjusted and adjusted ORs were used to combine individual OR in majority of meta-analysis. Second, original studies with different adjustment strategies of confounders were combined, i.e. the number of adjusted confounders and different factors being adjusted in each original study. Third, adjustment did not make the effect size of original studies trend to constringency, which suggested that model fitting might have failed to correct the systematic error caused by confounding. The heterogeneity of confounder adjustment strategies in case-control studies may lead to further bias for summary effect size in meta-analyses, especially for weak or medium associations so that the direction of causal inference would be even reversed. Therefore, further methodological researches are needed, referring to the assessment of confounder adjustment strategies, as well as how to take this kind of bias into consideration when drawing conclusion based on summary estimation of meta-analyses.

Casein polymorphism heterogeneity influences casein micelle size in milk of individual cows.

PubMed

Day, L; Williams, R P W; Otter, D; Augustin, M A

2015-06-01

Milk samples from individual cows producing small (148-155 nm) or large (177-222 nm) casein micelles were selected to investigate the relationship between the individual casein proteins, specifically κ- and β-casein phenotypes, and casein micelle size. Only κ-casein AA and β-casein A1A1, A1A2 and A2A2 phenotypes were found in the large casein micelle group. Among the small micelle group, both κ-casein and β-casein phenotypes were more diverse. κ-Casein AB was the dominant phenotype, and 3 combinations (AA, AB, and BB) were present in the small casein micelle group. A considerable mix of β-casein phenotypes was found, including B and I variants, which were only found in the small casein micelle group. The relative amount of κ-casein to total casein was significantly higher in the small micelle group, and the nonglycosylated and glycosylated κ-casein contents were higher in the milks with small casein micelles (primarily with κ-casein AB and BB variants) compared with the large micelle group. The ratio of glycosylated to nonglycosylated κ-casein was higher in the milks with small casein micelles compared with the milks with large casein micelles. This suggests that although the amount of κ-casein (both glycosylated and nonglycosylated) is associated with micelle size, an increased proportion of glycosylated κ-casein could be a more important and favorable factor for small micelle size. This suggests that the increased spatial requirement due to addition of the glycosyl group with increasing extent of glycosylation of κ-casein is one mechanism that controls casein micelle assembly and growth. In addition, increased electrostatic repulsion due to the sialyl residues on the glycosyl group could be a contributory factor. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Role of evolutionary and ecological factors in the reproductive success and the spatial genetic structure of the temperate gorgonian Paramuricea clavata

PubMed Central

Mokhtar-Jamaï, Kenza; Coma, Rafel; Wang, Jinliang; Zuberer, Frederic; Féral, Jean-Pierre; Aurelle, Didier

2013-01-01

Dispersal and mating features strongly influence the evolutionary dynamics and the spatial genetic structure (SGS) of marine populations. For the first time in a marine invertebrate, we examined individual reproductive success, by conducting larval paternity assignments after a natural spawning event, combined with a small-scale SGS analysis within a population of the gorgonian Paramuricea clavata. Thirty four percent of the larvae were sired by male colonies surrounding the brooding female colonies, revealing that the bulk of the mating was accomplished by males from outside the studied area. Male success increased with male height and decreased with increasing male to female distance. The parentage analyses, with a strong level of self-recruitment (25%), unveiled the occurrence of a complex family structure at a small spatial scale, consistent with the limited larval dispersal of this species. However, no evidence of small scale SGS was revealed despite this family structure. Furthermore, temporal genetic structure was not observed, which appears to be related to the rather large effective population size. The low level of inbreeding found suggests a pattern of random mating in this species, which disagrees with expectations that limited larval dispersal should lead to biparental inbreeding. Surface brooding and investment in sexual reproduction in P. clavata contribute to multiple paternity (on average 6.4 fathers were assigned per brood), which enhance genetic diversity of the brood. Several factors may have contributed to the lack of biparental inbreeding in our study such as (i) the lack of sperm limitation at a small scale, (ii) multiple paternity, and (iii) the large effective population size. Thus, our results indicate that limited larval dispersal and complex family structure do not necessarily lead to biparental inbreeding and SGS. In the framework of conservation purposes, our results suggested that colony size, proximity among colonies and the population size should be taken into consideration for restoration projects. PMID:23789084

Variability of DTM-derived, morphometric parameters versus cell size. An example of application in Calabria (Southern Italy)

NASA Astrophysics Data System (ADS)

Rago, Valeria; Caloiero, Paola; Pellegrino, Annamaria Daniela; Iovine, Giulio G. R.; Terranova, Oreste G.; Pascale, Stefania

2016-04-01

Applications of DTM-derived morphometry are nowadays common in many fields of land-use planning, including the protection from natural hazards (cf. e.g. Iovine et al. 2013; 2014). For example, the mathematical modelling of physical processes that occur at slope or basin scales makes extensive use of quantitative parameters that describe the shape of Earth surface. Unfortunately, the values of these parameters depend on the detail with which the territory is represented. Therefore, different relationships must be adopted to describe the same physical processes at different scales. In this study, as part of a wide-ranging research aimed at modelling of geo-hydrological processes, a systematic and rigorous assessment of variability of the morphometric parameters against cell sizes is addressed. The study area under consideration is the whole Calabrian territory, extended about 15075 square kilometres. The region has recently been zoned into eleven homogeneous geomorphological sectors (Antronico et al., 2010). For each geomorphological sector, DTMs have been derived from topographic maps at 1:5000 scale, with cell sizes of 5, 10, 20 and 40 m. The following morphometric parameters - among those most frequently used in land management - have then been evaluated for the above DTMs: altitude, steepness of slope, aspect, plan and profile curvatures, slope length, topographical wetness index, stream power index, topographic position index, terrain ruggedness index, slope length factor. The first results show a marked dependence on cell size for some of the considered parameters. In other cases, such dependence seems not significant. Mathematical relationships are proposed between cell size and considered parameters, also taking into account the geomorphological contexts examined. Based on the above relationships, the most suitable scale to be used for modelling physical processes in a given area of interest can be selected. References Antronico L., L. Borselli, R. Coscarelli, G. Gullà, G. Iovine, O. Petrucci, P. Salvador Sanchis, M. Sorriso-Valvo, O. Terranova, D. Torri, V. Bagarello, C. Di Stefano, V. Ferro, G. Buttafuoco, G. Callegari, P. Porto, B. Betrò, A. Bodini, C. Brambilla (2010) - Relazione Finale Contratto Lotto 2 Pericolosità legata ai fenomeni di intensa erosione idrica areale e lineare- POR Calabria 2000-2006, Azione. 1.4c. Rapporto per Autorità di Bacino Regione Calabria. Iovine G., Greco R., Gariano S.L., Pellegrino A.D., Terranova O.G. (2014) - Shallow-landslide susceptibility in the Costa Viola mountain ridge (southern Calabria, Italy) with considerations on the role of causal factors. Natural Hazards, 73(1), pp.111-136. In: G. Iovine & D. Cohen (Eds.), Advanced methods in landslide modelling. Iovine G., Greco R., Gariano S.L., Iaquinta P., Pellegrino A.D., Terranova O.G. (2013) - Shallow-landslide susceptibility in the Costa Viola mountain ridge (Italia). In: Landslide Science and Practice, Claudio Margottini, Paolo Canuti, Kyoji Sassa (Editors), Volume 3: Spatial Analysis and Modelling, pp.81-87. Proc. Second World Landslide Forum, 3-7 October 2011, Rome.

Some Sociological Contexts for Consideration When Designing a School Puberty/Sexuality Curriculum

ERIC Educational Resources Information Center

Collier-Harris, Christine A.; Goldman, Juliette D. G.

2017-01-01

Sociological contexts are key factors in education and schooling. Contemporary contexts of world-view, or "Weltanschauungen," such as human rights, public health, demographics, biosocial factors including earlier puberty and a developmentalist approach, and technological connectivity, warrant significant professional consideration by…

Quantifying the seasonal and spatial variability of sedimentation in a mesotidal mangrove stand on a mega delta

NASA Astrophysics Data System (ADS)

Hale, R. P.; Goodbred, S. L., Jr.; Wilson, C.; Peters, C.; Bain, R. L.; Tasich, C. M.

2016-12-01

A one-year study of environmental conditions in the Sundarbans National Forest (SNF; SW Bangladesh) examined the relative importance of several factors controlling sedimentation in a mesotidal mangrove stand. This region receives almost no direct input from the Ganges-Brahmaputra-Meghna Rivers (GBM), however 25% of the 1*109 tons/y of sediment delivered by these rivers to the Bay of Bengal is subsequently transported inland via tidal activity (e.g., Rogers et al., 2013). We hope to clarify the relative importance of several primary controls on sedimentation in the SNF. These factors include platform inundation duration (ID) and depth, suspended sediment concentration (SSC), and settling velocity (from sediment grain size). We use data from instruments deployed in the tidal channel and on the tidal platform, sediment samples collected in the tidal channel, and sedimentation rates observed at two locations on the tidal platform. The perimeter station (PS) is near a primary channel, while the interior station (IS) is located 6 river km inland, near a smaller, secondary channel. Maximum inundation depth is relatively consistent throughout the year, although the tidal wave form varies seasonally. ID varies considerably, with the monsoon experiencing 10x longer flood periods than the dry season over the course of an individual spring-neap tide cycle. Tidal-channel SSC co-varies with GBM discharge, and can approach 3 g/l during the monsoon, compared to <0.5 g/l in the dry season. Accordingly, we observe 1-5 cm of deposition during the monsoon, and <1 cm during the dry season. Despite being located 6 km from the primary tidal channel, the IS typically floods before the PS, resulting in 4x and 1.25x longer ID at IS during the dry season and monsoon, respectively. Sediment grain size decreases towards the SNF interior from 30 um to 15 um (D50), with no obvious seasonal trend. Settling velocity is sufficiently rapid to completely clear the water column during slack high water at both locations. Monsoon sedimentation along this same reach increases from 1-3 at PS to 3-5 cm at IS. If SSC were the most important control, we would observe the highest sedimentation rates at the perimeter, where the least amount of extraction has occurred. We observe the opposite, suggesting that ID is also an important factor for consideration.

The influence of speed and size on avian terrestrial locomotor biomechanics: Predicting locomotion in extinct theropod dinosaurs.

PubMed

Bishop, P J; Graham, D F; Lamas, L P; Hutchinson, J R; Rubenson, J; Hancock, J A; Wilson, R S; Hocknull, S A; Barrett, R S; Lloyd, D G; Clemente, C J

2018-01-01

How extinct, non-avian theropod dinosaurs moved is a subject of considerable interest and controversy. A better understanding of non-avian theropod locomotion can be achieved by better understanding terrestrial locomotor biomechanics in their modern descendants, birds. Despite much research on the subject, avian terrestrial locomotion remains little explored in regards to how kinematic and kinetic factors vary together with speed and body size. Here, terrestrial locomotion was investigated in twelve species of ground-dwelling bird, spanning a 1,780-fold range in body mass, across almost their entire speed range. Particular attention was devoted to the ground reaction force (GRF), the force that the feet exert upon the ground. Comparable data for the only other extant obligate, striding biped, humans, were also collected and studied. In birds, all kinematic and kinetic parameters examined changed continuously with increasing speed, while in humans all but one of those same parameters changed abruptly at the walk-run transition. This result supports previous studies that show birds to have a highly continuous locomotor repertoire compared to humans, where discrete 'walking' and 'running' gaits are not easily distinguished based on kinematic patterns alone. The influences of speed and body size on kinematic and kinetic factors in birds are developed into a set of predictive relationships that may be applied to extinct, non-avian theropods. The resulting predictive model is able to explain 79-93% of the observed variation in kinematics and 69-83% of the observed variation in GRFs, and also performs well in extrapolation tests. However, this study also found that the location of the whole-body centre of mass may exert an important influence on the nature of the GRF, and hence some caution is warranted, in lieu of further investigation.

Local Variability of Parameters for Characterization of the Corneal Subbasal Nerve Plexus.

PubMed

Winter, Karsten; Scheibe, Patrick; Köhler, Bernd; Allgeier, Stephan; Guthoff, Rudolf F; Stachs, Oliver

2016-01-01

The corneal subbasal nerve plexus (SNP) offers high potential for early diagnosis of diabetic peripheral neuropathy. Changes in subbasal nerve fibers can be assessed in vivo by confocal laser scanning microscopy (CLSM) and quantified using specific parameters. While current study results agree regarding parameter tendency, there are considerable differences in terms of absolute values. The present study set out to identify factors that might account for this high parameter variability. In three healthy subjects, we used a novel method of software-based large-scale reconstruction that provided SNP images of the central cornea, decomposed the image areas into all possible image sections corresponding to the size of a single conventional CLSM image (0.16 mm2), and calculated a set of parameters for each image section. In order to carry out a large number of virtual examinations within the reconstructed image areas, an extensive simulation procedure (10,000 runs per image) was implemented. The three analyzed images ranged in size from 3.75 mm2 to 4.27 mm2. The spatial configuration of the subbasal nerve fiber networks varied greatly across the cornea and thus caused heavily location-dependent results as well as wide value ranges for the parameters assessed. Distributions of SNP parameter values varied greatly between the three images and showed significant differences between all images for every parameter calculated (p < 0.001 in each case). The relatively small size of the conventionally evaluated SNP area is a contributory factor in high SNP parameter variability. Averaging of parameter values based on multiple CLSM frames does not necessarily result in good approximations of the respective reference values of the whole image area. This illustrates the potential for examiner bias when selecting SNP images in the central corneal area.

An algorithm for fast elastic wave simulation using a vectorized finite difference operator

NASA Astrophysics Data System (ADS)

Malkoti, Ajay; Vedanti, Nimisha; Tiwari, Ram Krishna

2018-07-01

Modern geophysical imaging techniques exploit the full wavefield information which can be simulated numerically. These numerical simulations are computationally expensive due to several factors, such as a large number of time steps and nodes, big size of the derivative stencil and huge model size. Besides these constraints, it is also important to reformulate the numerical derivative operator for improved efficiency. In this paper, we have introduced a vectorized derivative operator over the staggered grid with shifted coordinate systems. The operator increases the efficiency of simulation by exploiting the fact that each variable can be represented in the form of a matrix. This operator allows updating all nodes of a variable defined on the staggered grid, in a manner similar to the collocated grid scheme and thereby reducing the computational run-time considerably. Here we demonstrate an application of this operator to simulate the seismic wave propagation in elastic media (Marmousi model), by discretizing the equations on a staggered grid. We have compared the performance of this operator on three programming languages, which reveals that it can increase the execution speed by a factor of at least 2-3 times for FORTRAN and MATLAB; and nearly 100 times for Python. We have further carried out various tests in MATLAB to analyze the effect of model size and the number of time steps on total simulation run-time. We find that there is an additional, though small, computational overhead for each step and it depends on total number of time steps used in the simulation. A MATLAB code package, 'FDwave', for the proposed simulation scheme is available upon request.

Investigating in-field and out-of-field neutron contamination in high-energy medical linear accelerators based on the treatment factors of field size, depth, beam modifiers, and beam type.

PubMed

Biltekin, Fatih; Yeginer, Mete; Ozyigit, Gokhan

2015-07-01

We analysed the effects of field size, depth, beam modifier and beam type on the amount of in-field and out-of-field neutron contamination for medical linear accelerators (linacs). Measurements were carried out for three high-energy medical linacs of Elekta Synergy Platform, Varian Clinac DHX High Performance and Philips SL25 using bubble detectors. The photo-neutron measurements were taken in the first two linacs with 18 MV nominal energy, whereas the electro-neutrons were measured in the three linacs with 9 MeV, 10 MeV, 15 MeV and 18 MeV. The central neutron doses increased with larger field sizes as a dramatic drop off was observed in peripheral areas. Comparing with the jaws-shaped open-field of 10 × 10 cm, the motorised and physical wedges contributed to neutron contamination at central axis by 60% and 18%, respectively. The similar dose increment was observed in MLC-shaped fields. The contributions of MLCs were in the range of 55-59% and 19-22% in Elekta and Varian linacs comparing with 10 × 10 and 20 × 20 cm open fields shaped by the jaws, respectively. The neutron doses at shallow depths were found to be higher than the doses found at deeper regions. The electro-neutron dose at the 18 MeV energy was higher than the doses at the electron energies of 15 MeV and 9 MeV by a factor of 3 and 50, respectively. The photo- and electro-neutron dose should be taken into consideration in the radiation treatment with high photon and electron energies. Copyright © 2015 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Human Factors Considerations in System Design

NASA Technical Reports Server (NTRS)

Mitchell, C. M. (Editor); Vanbalen, P. M. (Editor); Moe, K. L. (Editor)

1983-01-01

Human factors considerations in systems design was examined. Human factors in automated command and control, in the efficiency of the human computer interface and system effectiveness are outlined. The following topics are discussed: human factors aspects of control room design; design of interactive systems; human computer dialogue, interaction tasks and techniques; guidelines on ergonomic aspects of control rooms and highly automated environments; system engineering for control by humans; conceptual models of information processing; information display and interaction in real time environments.

Influence of Terraced area DEM Resolution on RUSLE LS Factor

NASA Astrophysics Data System (ADS)

Zhang, Hongming; Baartman, Jantiene E. M.; Yang, Xiaomei; Gai, Lingtong; Geissen, Viollette

2017-04-01

Topography has a large impact on the erosion of soil by water. Slope steepness and slope length are combined (the LS factor) in the universal soil-loss equation (USLE) and its revised version (RUSLE) for predicting soil erosion. The LS factor is usually extracted from a digital elevation model (DEM). The grid size of the DEM will thus influence the LS factor and the subsequent calculation of soil loss. Terracing is considered as a support practice factor (P) in the USLE/RUSLE equations, which is multiplied with the other USLE/RUSLE factors. However, as terraces change the slope length and steepness, they also affect the LS factor. The effect of DEM grid size on the LS factor has not been investigated for a terraced area. We obtained a high-resolution DEM by unmanned aerial vehicles (UAVs) photogrammetry, from which the slope steepness, slope length, and LS factor were extracted. The changes in these parameters at various DEM resolutions were then analysed. The DEM produced detailed LS-factor maps, particularly for low LS factors. High (small valleys, gullies, and terrace ridges) and low (flats and terrace fields) spatial frequencies were both sensitive to changes in resolution, so the areas of higher and lower slope steepness both decreased with increasing grid size. Average slope steepness decreased and average slope length increased with grid size. Slope length, however, had a larger effect than slope steepness on the LS factor as the grid size varied. The LS factor increased when the grid size increased from 0.5 to 30-m and increased significantly at grid sizes >5-m. The LS factor was increasingly overestimated as grid size decreased. The LS factor decreased from grid sizes of 30 to 100-m, because the details of the terraced terrain were gradually lost, but the factor was still overestimated.

Maternal, social and abiotic environmental effects on growth vary across life stages in a cooperative mammal

PubMed Central

English, Sinead; Bateman, Andrew W; Mares, Rafael; Ozgul, Arpat; Clutton-Brock, Tim H

2014-01-01

Resource availability plays a key role in driving variation in somatic growth and body condition, and the factors determining access to resources vary considerably across life stages. Parents and carers may exert important influences in early life, when individuals are nutritionally dependent, with abiotic environmental effects having stronger influences later in development as individuals forage independently. Most studies have measured specific factors influencing growth across development or have compared relative influences of different factors within specific life stages. Such studies may not capture whether early-life factors continue to have delayed effects at later stages, or whether social factors change when individuals become nutritionally independent and adults become competitors for, rather than providers of, food. Here, we examined variation in the influence of the abiotic, social and maternal environment on growth across life stages in a wild population of cooperatively breeding meerkats. Cooperatively breeding vertebrates are ideal for investigating environmental influences on growth. In addition to experiencing highly variable abiotic conditions, cooperative breeders are typified by heterogeneity both among breeders, with mothers varying in age and social status, and in the number of carers present. Recent rainfall had a consistently marked effect on growth across life stages, yet other seasonal terms only influenced growth during stages when individuals were growing fastest. Group size and maternal dominance status had positive effects on growth during the period of nutritional dependence on carers, but did not influence mass at emergence (at 1 month) or growth at independent stages (>4 months). Pups born to older mothers were lighter at 1 month of age and subsequently grew faster as subadults. Males grew faster than females during the juvenile and subadult stage only. Our findings demonstrate the complex ways in which the external environment influences development in a cooperative mammal. Individuals are most sensitive to social and maternal factors during the period of nutritional dependence on carers, whereas direct environmental effects are relatively more important later in development. Understanding the way in which environmental sensitivity varies across life stages is likely to be an important consideration in predicting trait responses to environmental change. PMID:24102215

Dissection of two QTL on SSC2 identifies candidate genes for ovulation rate in swine

USDA-ARS?s Scientific Manuscript database

Litter size is an economically important trait to producers that is lowly heritable, observable only after considerable investment has been made in gilt development and responds slowly to selection. Ovulation rate, a component trait of litter size, is moderately heritable, sex limited and should res...

The Importance of Teaching Power in Statistical Hypothesis Testing

ERIC Educational Resources Information Center

Olinsky, Alan; Schumacher, Phyllis; Quinn, John

2012-01-01

In this paper, we discuss the importance of teaching power considerations in statistical hypothesis testing. Statistical power analysis determines the ability of a study to detect a meaningful effect size, where the effect size is the difference between the hypothesized value of the population parameter under the null hypothesis and the true value…

Statistical Significance and Effect Size: Two Sides of a Coin.

ERIC Educational Resources Information Center

Fan, Xitao

This paper suggests that statistical significance testing and effect size are two sides of the same coin; they complement each other, but do not substitute for one another. Good research practice requires that both should be taken into consideration to make sound quantitative decisions. A Monte Carlo simulation experiment was conducted, and a…

Determination by ray-tracing of the regions where mid-latitude whistlers exit from the lower ionosphere

NASA Astrophysics Data System (ADS)

Strangeways, H. J.

1981-03-01

The size and position of the regions in the bottomside ionosphere through which downcoming whistlers emerge are estimated using ray-tracing calculations in both summer day and winter night models of the magnetospheric plasma. Consideration is given to the trapping of upgoing whistler-mode waves through both the base and the side of ducts. It is found that for downcoming rays which were trapped in the duct in the summer day model, the limited range of wave-normal angles which can be transmitted from the lower ionosphere to free space below causes the size of the exit point to be considerably smaller than the region of incidence. The exit point is found to be approximately 100 km in size, which agrees with ground-based observations of fairly narrow trace whistlers. For rays trapped in the duct in the winter night model, it is found that the size of the exit point is more nearly the same as the range of final latitudes of the downcoming rays in the lower ionosphere.

In vivo locomotor strain in the hindlimb bones of alligator mississippiensis and iguana iguana: implications for the evolution of limb bone safety factor and non-sprawling limb posture

PubMed

Blob; Biewener

1999-05-01

Limb postures of terrestrial tetrapods span a continuum from sprawling to fully upright; however, most experimental investigations of locomotor mechanics have focused on mammals and ground-dwelling birds that employ parasagittal limb kinematics, leaving much of the diversity of tetrapod locomotor mechanics unexplored. This study reports measurements of in vivo locomotor strain from the limb bones of lizard (Iguana iguana) and crocodilian (Alligator mississippiensis) species, animals from previously unsampled phylogenetic lineages with non-parasagittal limb posture and kinematics. Principal strain orientations and shear strain magnitudes indicate that the limb bones of these species experience considerable torsion during locomotion. This contrasts with patterns commonly observed in mammals, but matches predictions from kinematic observations of axial rotation in lizard and crocodilian limbs. Comparisons of locomotor load magnitudes with the mechanical properties of limb bones in Alligator and Iguana indicate that limb bone safety factors in bending for these species range from 5.5 to 10.8, as much as twice as high as safety factors previously calculated for mammals and birds. Limb bone safety factors in shear (3.9-5.4) for Alligator and Iguana are also moderately higher than safety factors to yield in bending for birds and mammals. Finally, correlations between limb posture and strain magnitudes in Alligator show that at some recording locations limb bone strains can increase during upright locomotion, in contrast to expectations based on size-correlated changes in posture among mammals that limb bone strains should decrease with the use of an upright posture. These data suggest that, in some lineages, strain magnitudes may not have been maintained at constant levels through the evolution of a non-sprawling posture unless the postural change was accompanied by a shift to parasagittal kinematics or by an evolutionary decrease in body size.

Moments of catchment storm area

NASA Technical Reports Server (NTRS)

Eagleson, P. S.; Wang, Q.

1985-01-01

The portion of a catchment covered by a stationary rainstorm is modeled by the common area of two overlapping circles. Given that rain occurs within the catchment and conditioned by fixed storm and catchment sizes, the first two moments of the distribution of the common area are derived from purely geometrical considerations. The variance of the wetted fraction is shown to peak when the catchment size is equal to the size of the predominant storm. The conditioning on storm size is removed by assuming a probability distribution based upon the observed fractal behavior of cloud and rainstorm areas.

Effect of limb regeneration on size increase at molt of the shore crabs Hemigrapsus oregonensis and Pachygrapsus crassipes.

PubMed

Kuris, A M; Mager, M

1975-09-01

Size increase at molt is reduced following multiple limb regeneration in the shore crabs, Hemigrapsus oregonensis and Pachygrapsus crassipes. Limb loss per se does not influence postmolt size. Effect of increasing number of regenerating limbs is additive. Postmolt size is programmed early in the premolt period of the preceding instar and is probably not readily influenced by water uptake mechanics at ecdysis. A simple model for growth, molting, and regeneration in heavily calcified Crustacea is developed from the viewpoint of adaptive strategies and energetic considerations.

Silk Fibroin-Based Nanoparticles for Drug Delivery

PubMed Central

Zhao, Zheng; Li, Yi; Xie, Mao-Bin

2015-01-01

Silk fibroin (SF) is a protein-based biomacromolecule with excellent biocompatibility, biodegradability and low immunogenicity. The development of SF-based nanoparticles for drug delivery have received considerable attention due to high binding capacity for various drugs, controlled drug release properties and mild preparation conditions. By adjusting the particle size, the chemical structure and properties, the modified or recombinant SF-based nanoparticles can be designed to improve the therapeutic efficiency of drugs encapsulated into these nanoparticles. Therefore, they can be used to deliver small molecule drugs (e.g., anti-cancer drugs), protein and growth factor drugs, gene drugs, etc. This paper reviews recent progress on SF-based nanoparticles, including chemical structure, properties, and preparation methods. In addition, the applications of SF-based nanoparticles as carriers for therapeutic drugs are also reviewed. PMID:25749470

Concepts for Distributed Engine Control

NASA Technical Reports Server (NTRS)

Culley, Dennis E.; Thomas, Randy; Saus, Joseph

2007-01-01

Gas turbine engines for aero-propulsion systems are found to be highly optimized machines after over 70 years of development. Still, additional performance improvements are sought while reduction in the overall cost is increasingly a driving factor. Control systems play a vitally important part in these metrics but are severely constrained by the operating environment and the consequences of system failure. The considerable challenges facing future engine control system design have been investigated. A preliminary analysis has been conducted of the potential benefits of distributed control architecture when applied to aero-engines. In particular, reductions in size, weight, and cost of the control system are possible. NASA is conducting research to further explore these benefits, with emphasis on the particular benefits enabled by high temperature electronics and an open-systems approach to standardized communications interfaces.

Experimental Investigation of a Piezo-Optical Transducer for Highly Sensitive Strain Gauges

NASA Astrophysics Data System (ADS)

Paulish, A. G.; Zagubisalo, P. S.; Barakov, V. N.; Pavlov, M. A.

2018-03-01

The characteristics of a piezo-optical transducer of a new design with high strain sensitivity at compact size have been studied.The original form of the photoelastic element provides a considerable increase in the stress in its working area at a given external force, resulting in an increase in the sensitivity of the transducer. The main characteristics of the transducer were measured using a specially designed device. The strain at a given applied force was calculated using a developed mathematical model of the transducer. As a result, the sensitivity to the relative strain was Δ x/ x=3 · 10-10, the dynamic range was at least four orders of magnitude higher and the gauge factor three orders of magnitude higher than those of strain-resistive gauges.

Students’ planetarium

NASA Astrophysics Data System (ADS)

Brozis, Mirosław; Świderski, Kamil

2018-05-01

Our students built a full-size, mobile planetarium in three weeks. The planetarium was built with commonly available, cheap construction materials. Our priorities were mobility, possibility of quick assembly and reassembly and the students’ availability of materials in every place in the world. The students calculated all the parameters of the planetarium’s construction themselves, chose materials of appropriate technical parameters, built the planetarium’s framework, elaborated the methods of projections and sounding. Taking into consideration the spectators’ comfort they also designed systems of air conditioning and cooling. The project is completely consistent with the STEM and even the STEAM method. The artistic factor of the students’ work was revealed during the visualisation of planetarium projections and its adornment. The final product of their work is a functional planetarium and a manual for its construction.

Characterisation of the subtelomeric regions of Giardia lamblia genome isolate WBC6.

PubMed

Prabhu, Anjali; Morrison, Hilary G; Martinez, Charles R; Adam, Rodney D

2007-04-01

Giardia trophozoites are polyploid and have five chromosomes. The chromosome homologues demonstrate considerable size heterogeneity due to variation in the subtelomeric regions. We used clones from the genome project with telomeric sequence at one end to identify six subtelomeric regions in addition to previously identified subtelomeric regions, to study the telomeric arrangement of the chromosomes. The subtelomeric regions included two retroposons, one retroposon pseudogene, and two vsp genes, in addition to the previously identified subtelomeric regions that include ribosomal DNA repeats. The presence of vsp genes in a subtelomeric region suggests that telomeric rearrangements may contribute to the generation of vsp diversity. These studies of the subtelomeric regions of Giardia may contribute to our understanding of the factors that maintain stability, while allowing diversity in chromosome structure.

Mosaic analysis for personal water consumption in residential buildings in Hong Kong

NASA Astrophysics Data System (ADS)

Lo, Yuet Fai; Wong, Ling Tim; Mui, Kwok Wai

2018-02-01

This paper investigates the daily per capita residential water use based on the demographic and socio-economic factors described by Mosaic Hong Kong and provides insights into future water supply planning. A survey was conducted to collect information on household water use behaviours and water consumption patterns. The survey results indicate that considerable consumption differences (in the range of 115.6 to 167.7 litres per person per day) exist among the Mosaic Groups, and the average daily per capita residential water consumption is estimated to be 139.6 litres per person per day. The results also reveal that the daily per capita water consumption is inversely proportional to household size in the range of 2 to 6. Moreover, consumption differences among housing types and districts are reported.

Longitudinal patterns of employment and postsecondary education for adults with autism and average-range IQ

PubMed Central

Taylor, Julie Lounds; Henninger, Natalie A.; Mailick, Marsha R.

2015-01-01

This study examined correlates of participation in postsecondary education (PSE) and employment over 12 years for 73 adults with autism spectrum disorders (ASD) and average-range IQ whose families were part of a larger, longitudinal study. Correlates included demographic (sex, maternal education, paternal education), behavioral (activities of daily living, maladaptive behaviors, autism symptoms) and family (size of maternal social network; maternal depressive symptoms, anxiety, and pessimism) factors. Although two-thirds of adults with ASD participated in competitive employment/PSE during the study, fewer than 25% maintained these activities over the study period. Behavioral characteristics distinguished those who never had competitive employment/PSE from those who sometimes or consistently participated in these activities. Women were considerably less likely than men to maintain employment/PSE over time. PMID:26019306

Development of size reduction equations for calculating power input for grinding pine wood chips using hammer mill

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naimi, Ladan J.; Collard, Flavien; Bi, Xiaotao

Size reduction is an unavoidable operation for preparing biomass for biofuels and bioproduct conversion. Yet, there is considerable uncertainty in power input requirement and the uniformity of ground biomass. Considerable gains are possible if the required power input for a size reduction ratio is estimated accurately. In this research three well-known mechanistic equations attributed to Rittinger, Kick, and Bond available for predicting energy input for grinding pine wood chips were tested against experimental grinding data. Prior to testing, samples of pine wood chips were conditioned to 11.7% wb, moisture content. The wood chips were successively ground in a hammer millmore » using screen sizes of 25.4 mm, 10 mm, 6.4 mm, and 3.2 mm. The input power and the flow of material into the grinder were recorded continuously. The recorded power input vs. mean particle size showed that the Rittinger equation had the best fit to the experimental data. The ground particle sizes were 4 to 7 times smaller than the size of installed screen. Geometric mean size of particles were calculated using two methods (1) Tyler sieves and using particle size analysis and (2) Sauter mean diameter calculated from the ratio of volume to surface that were estimated from measured length and width. The two mean diameters agreed well, pointing to the fact that either mechanical sieving or particle imaging can be used to characterize particle size. In conclusion, specific energy input to the hammer mill increased from 1.4 kWh t –1 (5.2 J g –1) for large 25.1-mm screen to 25 kWh t –1 (90.4 J g –1) for small 3.2-mm screen.« less

Development of size reduction equations for calculating power input for grinding pine wood chips using hammer mill

DOE PAGES

Naimi, Ladan J.; Collard, Flavien; Bi, Xiaotao; ...

2016-01-05

Size reduction is an unavoidable operation for preparing biomass for biofuels and bioproduct conversion. Yet, there is considerable uncertainty in power input requirement and the uniformity of ground biomass. Considerable gains are possible if the required power input for a size reduction ratio is estimated accurately. In this research three well-known mechanistic equations attributed to Rittinger, Kick, and Bond available for predicting energy input for grinding pine wood chips were tested against experimental grinding data. Prior to testing, samples of pine wood chips were conditioned to 11.7% wb, moisture content. The wood chips were successively ground in a hammer millmore » using screen sizes of 25.4 mm, 10 mm, 6.4 mm, and 3.2 mm. The input power and the flow of material into the grinder were recorded continuously. The recorded power input vs. mean particle size showed that the Rittinger equation had the best fit to the experimental data. The ground particle sizes were 4 to 7 times smaller than the size of installed screen. Geometric mean size of particles were calculated using two methods (1) Tyler sieves and using particle size analysis and (2) Sauter mean diameter calculated from the ratio of volume to surface that were estimated from measured length and width. The two mean diameters agreed well, pointing to the fact that either mechanical sieving or particle imaging can be used to characterize particle size. In conclusion, specific energy input to the hammer mill increased from 1.4 kWh t –1 (5.2 J g –1) for large 25.1-mm screen to 25 kWh t –1 (90.4 J g –1) for small 3.2-mm screen.« less

Sample size considerations using mathematical models: an example with Chlamydia trachomatis infection and its sequelae pelvic inflammatory disease.

PubMed

Herzog, Sereina A; Low, Nicola; Berghold, Andrea

2015-06-19

The success of an intervention to prevent the complications of an infection is influenced by the natural history of the infection. Assumptions about the temporal relationship between infection and the development of sequelae can affect the predicted effect size of an intervention and the sample size calculation. This study investigates how a mathematical model can be used to inform sample size calculations for a randomised controlled trial (RCT) using the example of Chlamydia trachomatis infection and pelvic inflammatory disease (PID). We used a compartmental model to imitate the structure of a published RCT. We considered three different processes for the timing of PID development, in relation to the initial C. trachomatis infection: immediate, constant throughout, or at the end of the infectious period. For each process we assumed that, of all women infected, the same fraction would develop PID in the absence of an intervention. We examined two sets of assumptions used to calculate the sample size in a published RCT that investigated the effect of chlamydia screening on PID incidence. We also investigated the influence of the natural history parameters of chlamydia on the required sample size. The assumed event rates and effect sizes used for the sample size calculation implicitly determined the temporal relationship between chlamydia infection and PID in the model. Even small changes in the assumed PID incidence and relative risk (RR) led to considerable differences in the hypothesised mechanism of PID development. The RR and the sample size needed per group also depend on the natural history parameters of chlamydia. Mathematical modelling helps to understand the temporal relationship between an infection and its sequelae and can show how uncertainties about natural history parameters affect sample size calculations when planning a RCT.

Heterogeneous nucleation on rough surfaces: Generalized Gibbs' approach.

PubMed

Abyzov, Alexander S; Schmelzer, Jürn W P; Davydov, Leonid N

2017-12-07

Heterogeneous nucleation (condensation) of liquid droplets from vapor (gas) on a defective solid surface is considered. The vapor is described by the van der Waals equation of state. The dependence of nucleating droplet parameters on droplet size is accounted for within the generalized Gibbs approach. As a surface defect, a conic void is taken. This choice allows us to simplify the analysis and at the same time to follow the main aspects of the influence of the surface roughness on the nucleation process. Similar to condensation on ideal planar surfaces, the contact angle and catalytic factor for heterogeneous nucleation on a rough surface depend on the degree of vapor overcooling. In the case of droplet formation on a hydrophilic surface of a conic void, the nucleation rate considerably increases in comparison with the condensation on a planar interface. In fact, the presence of a defect on the hydrophilic surface leads to a considerable shift of the spinodal towards lower supersaturation in comparison with heterogeneous nucleation on a planar interface. With the decrease in the void cone angle, the heterogeneous spinodal approaches the binodal, and the region of metastability is diminished at the expense of the instability region.

Randomization Does Not Help Much, Comparability Does

PubMed Central

Saint-Mont, Uwe

2015-01-01

According to R.A. Fisher, randomization “relieves the experimenter from the anxiety of considering innumerable causes by which the data may be disturbed.” Since, in particular, it is said to control for known and unknown nuisance factors that may considerably challenge the validity of a result, it has become very popular. This contribution challenges the received view. First, looking for quantitative support, we study a number of straightforward, mathematically simple models. They all demonstrate that the optimism surrounding randomization is questionable: In small to medium-sized samples, random allocation of units to treatments typically yields a considerable imbalance between the groups, i.e., confounding due to randomization is the rule rather than the exception. In the second part of this contribution, the reasoning is extended to a number of traditional arguments in favour of randomization. This discussion is rather non-technical, and sometimes touches on the rather fundamental Frequentist/Bayesian debate. However, the result of this analysis turns out to be quite similar: While the contribution of randomization remains doubtful, comparability contributes much to a compelling conclusion. Summing up, classical experimentation based on sound background theory and the systematic construction of exchangeable groups seems to be advisable. PMID:26193621

The Selective Value of Bacterial Shape

PubMed Central

Young, Kevin D.

2006-01-01

Why do bacteria have shape? Is morphology valuable or just a trivial secondary characteristic? Why should bacteria have one shape instead of another? Three broad considerations suggest that bacterial shapes are not accidental but are biologically important: cells adopt uniform morphologies from among a wide variety of possibilities, some cells modify their shape as conditions demand, and morphology can be tracked through evolutionary lineages. All of these imply that shape is a selectable feature that aids survival. The aim of this review is to spell out the physical, environmental, and biological forces that favor different bacterial morphologies and which, therefore, contribute to natural selection. Specifically, cell shape is driven by eight general considerations: nutrient access, cell division and segregation, attachment to surfaces, passive dispersal, active motility, polar differentiation, the need to escape predators, and the advantages of cellular differentiation. Bacteria respond to these forces by performing a type of calculus, integrating over a number of environmental and behavioral factors to produce a size and shape that are optimal for the circumstances in which they live. Just as we are beginning to answer how bacteria create their shapes, it seems reasonable and essential that we expand our efforts to understand why they do so. PMID:16959965

Occupational exposure limit for silver nanoparticles: considerations on the derivation of a general health-based value.

PubMed

Weldon, Brittany A; M Faustman, Elaine; Oberdörster, Günter; Workman, Tomomi; Griffith, William C; Kneuer, Carsten; Yu, Il Je

2016-09-01

With the increased production and widespread commercial use of silver nanoparticles (AgNPs), human and environmental exposures to silver nanoparticles are inevitably increasing. In particular, persons manufacturing and handling silver nanoparticles and silver nanoparticle containing products are at risk of exposure, potentially resulting in health hazards. While silver dusts, consisting of micro-sized particles and soluble compounds have established occupational exposure limits (OELs), silver nanoparticles exhibit different physicochemical properties from bulk materials. Therefore, we assessed silver nanoparticle exposure and related health hazards in order to determine whether an additional OEL may be needed. Dosimetric evaluations in our study identified the liver as the most sensitive target organ following inhalation exposure, and as such serves as the critical target organ for setting an occupational exposure standard for airborne silver nanoparticles. This study proposes an OEL of 0.19 μg/m(3) for silver nanoparticles derived from benchmark concentrations (BMCs) from subchronic rat inhalation toxicity assessments and the human equivalent concentration (HEC) with kinetic considerations and additional uncertainty factors. It is anticipated that this level will protect workers from potential health hazards, including lung, liver, and skin damage.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tregillis, Ian Lee

This document examines the performance of a generic flat-mirror multimonochromatic imager (MMI), with special emphasis on existing instruments at NIF and Omega. We begin by deriving the standard equation for the mean number of photons detected per resolution element. The pinhole energy bandwidth is a contributing factor; this is dominated by the finite size of the source and may be considerable. The most common method for estimating the spatial resolution of such a system (quadrature addition) is, technically, mathematically invalid for this case. However, under the proper circumstances it may produce good estimates compared to a rigorous calculation based onmore » the convolution of point-spread functions. Diffraction is an important contribution to the spatial resolution. Common approximations based on Fraunhofer (farfield) diffraction may be inappropriate and misleading, as the instrument may reside in multiple regimes depending upon its configuration or the energy of interest. It is crucial to identify the correct diffraction regime; Fraunhofer and Fresnel (near-field) diffraction profiles are substantially different, the latter being considerably wider. Finally, we combine the photonics and resolution analyses to derive an expression for the minimum signal level such that the resulting images are not dominated by photon statistics. This analysis is consistent with observed performance of the NIF MMI.« less

Rasch analysis and impact factor methods both yield valid and comparable measures of health status in interstitial lung disease.

PubMed

Patel, Amit S; Siegert, Richard J; Bajwah, Sabrina; Brignall, Kate; Gosker, Harry R; Moxham, John; Maher, Toby M; Renzoni, Elisabetta A; Wells, Athol U; Higginson, Irene J; Birring, Surinder S

2015-09-01

Rasch analysis has largely replaced impact factor methodology for developing health status measures. The aim of this study was to develop a health status questionnaire for patients with interstitial lung disease (ILD) using impact factor methodology and to compare its validity with that of another version developed using Rasch analysis. A preliminary 71-item questionnaire was developed and evaluated in 173 patients with ILD. Items were reduced by the impact factor method (King's Brief ILD questionnaire, KBILD-I) and Rasch analysis (KBILD-R). Both questionnaires were validated by assessing their relationship with forced vital capacity (FVC) and St Georges Respiratory Questionnaire (SGRQ) and by evaluating internal reliability, repeatability, and longitudinal responsiveness. The KBILD-R and KBILD-I comprised 15 items each. The content of eight items differed between the KBILD-R and KBILD-I. Internal and test-retest reliability was good for total scores of both questionnaires. There was a good relationship with SGRQ and moderate relationship with FVC for both questionnaires. Effect sizes were comparable. Both questionnaires discriminated patients with differing disease severity. Despite considerable differences in the content of retained items, both KBILD-R and KBILD-I questionnaires demonstrated acceptable measurement properties and performed comparably in a clinical setting. Copyright © 2015 Elsevier Inc. All rights reserved.

Analysis of a log periodic nano-antenna for multi-resonant broadband field enhancement and the Purcell factor

NASA Astrophysics Data System (ADS)

Yang, Jie; Kong, Fanmin; Li, Kang; Sheng, Shiwei

2015-05-01

Broadband nano-antennas play a central role in many areas of science and technology. However, a more intuitive understanding for rational design of nano-antennas with broadband response is desirable. A log periodic nano-antenna was studied in the paper. The finite-difference time-domain method was used to explore the spectral characteristics of the log periodic nano-antenna by the excitation mode of reception and emission. The effects of geometry on field enhancement and the Purcell factor were systematically described and investigated. The field enhancement of the nano-antenna can be tuned by geometric parameters such as the outer radius, the tooth angle, and the ratio of the radial sizes of successive teeth, which provide control over both the spectral resonance position and the field enhancement peak amplitude. The Purcell factor mainly depends on the outer radius, the tooth angle, and the bow angle. In addition, multi-resonant field enhancement was analyzed in detail by conformal transformation. Furthermore, a careful comparison of the characteristics of a bowtie nano-antenna demonstrated that the log periodic nano-antenna has considerable potential for multi-resonant field enhancement and improvement of the Purcell factor. The results provide a promising prospect for designing and optimizing the log periodic nano-antenna in a broad range of wavelengths.

Determinants of Catastrophic Dental Health Expenditure in China

PubMed Central

Liu, Xuenan; Gallagher, Jennifer Elizabeth; Zheng, Shuguo

2016-01-01

This study explored catastrophic health expenditure in China, due to out-of-pocket payments for dental care, and its associated individual- and contextual-level factors. We pooled data from 31,566 adults who participated in the third National Oral Health Survey with province-level data from different sources. We defined catastrophic dental health expenditure (CDHE) as payments for dental services and/or medication for dental problems during the last year that exceeded the 10% and 20% of the household income. The association of individual and contextual factors with catastrophic dental health expenditure was evaluated using two-level logistic regression models with individuals nested within provinces. Socioeconomic position (education and household income), household size and dental status (pain in teeth or mouth and number of teeth) were the individual-level factors associated with CDHE among the full sample of participants; and, also, among those who used dental services in the past year. Greater gross domestic product per capita was the only contextual factor associated with CDHE, and only at the lower income threshold. This study shows that out-of-pocket expenses for dental services may put a considerable, and unnecessary, burden on households’ finances. Our findings also help characterise those households more likely to face catastrophic expenditure on health if they have to pay for dental services. PMID:27977756

Living well with dementia: a systematic review and correlational meta-analysis of factors associated with quality of life, well-being and life satisfaction in people with dementia.

PubMed

Martyr, Anthony; Nelis, Sharon M; Quinn, Catherine; Wu, Yu-Tzu; Lamont, Ruth A; Henderson, Catherine; Clarke, Rachel; Hindle, John V; Thom, Jeanette M; Jones, Ian Rees; Morris, Robin G; Rusted, Jennifer M; Victor, Christina R; Clare, Linda

2018-05-08

Current policy emphasises the importance of 'living well' with dementia, but there has been no comprehensive synthesis of the factors related to quality of life (QoL), subjective well-being or life satisfaction in people with dementia. We examined the available evidence in a systematic review and meta-analysis. We searched electronic databases until 7 January 2016 for observational studies investigating factors associated with QoL, well-being and life satisfaction in people with dementia. Articles had to provide quantitative data and include ⩾75% people with dementia of any type or severity. We included 198 QoL studies taken from 272 articles in the meta-analysis. The analysis focused on 43 factors with sufficient data, relating to 37639 people with dementia. Generally, these factors were significantly associated with QoL, but effect sizes were often small (0.1-0.29) or negligible (<0.09). Factors reflecting relationships, social engagement and functional ability were associated with better QoL. Factors indicative of poorer physical and mental health (including depression and other neuropsychiatric symptoms) and poorer carer well-being were associated with poorer QoL. Longitudinal evidence about predictors of QoL was limited. There was a considerable between-study heterogeneity. The pattern of numerous predominantly small associations with QoL suggests a need to reconsider approaches to understanding and assessing living well with dementia.

Drought effect on weaning weight and efficiency relative to cow size in semiarid rangeland.

PubMed

Scasta, J D; Henderson, L; Smith, T

2015-12-01

Cow size has been suggested to be an important consideration for selecting cattle to match their production environment. Over the last several decades, the trend in genetic selection for maximum growth has led to gradual increases in beef cow size. An unrelated trend during this same period in the western United States has been an increase in temperature, drought frequency, and drought severity. Due to the potential influence of the increasing cow size trend on nutritional maintenance costs and production, we assessed the effect of cow size on weaning weight and efficiency in relation to drought on a semiarid high-elevation ranch in Wyoming. This study addresses a lack of empirical studies on the interaction between cow size and drought. We measured calf weaning weights of 80 Angus × Gelbvieh cows from 2011 to 2014 and assessed how drought affected weaning weights, efficiency (considered as calf weight relative to cow weight), intake requirements, and potential herd sizes relative to cow size. We stratified cows into 5 weight classes (453, 498, 544, 589, and 634 kg) as a proxy for cow size and adjusted weaning weights to a 210-d calf sex adjusted value. Cow size was a significant factor every year, with different cow sizes having advantages or disadvantages different years relative to weaning weight. However, efficiency for the smallest cows (453 kg) was always greater than efficiency for largest cows (634 kg; < 0.001). Efficiency for the smallest cows was greater in the driest year (0.41 ± 0.02) than efficiency of the largest cows in the wettest years (0.37 ± 0.01). The change in efficiency (ΔE) between wet and dry years was 0.18 for the smallest cow size and 0.02 for the largest cow size, and ΔE decreased as cow size increased. This is an indication of the ability of smaller cows to lower maintenance requirements in response to changes in the production environment but with optimal upside potential when conditions are favorable. These results indicate large cows (589 to 634 kg) do not maximize genetic potential in this production environment when conditions are optimum or provide any advantage over small or moderate size cows (453 to 544 kg) across the drought gradient.

Human factors considerations for the integration of traffic information and alerts on an airport surface map

DOT National Transportation Integrated Search

2010-12-01

The purpose of this document is to provide human factors considerations in the integration of traffic information and indications and alerts for runway status on an airport surface moving map. The US DOT Volpe Center, in support of the Federal Aviati...

Human factors considerations in the design and evaluation of electronic flight bags (EFBs) : version 2

DOT National Transportation Integrated Search

2003-09-01

Electronic Flight Bags (EFBs) are coming into the flight deck, bringing along with them a wide range of human factors considerations. In order to understand and assess the full impact of an EFB, designers and evaluators require an understanding of ho...

Human factors considerations in the design and evaluation of electronic flight bags (EFBs), version 1 : basic functions

DOT National Transportation Integrated Search

2003-09-01

Electronic Flight Bags (EFBs) are coming into the flight deck, bringing along with them a wide range of human factors considerations. In order to understand and assess the full impact of an EFB, designers and evaluators require an understanding of ho...

Extrinsic Factors Influencing Fetal Deformations and Intrauterine Growth Restriction

PubMed Central

Moh, Wendy; Graham, John M.; Wadhawan, Isha; Sanchez-Lara, Pedro A.

2012-01-01

The causes of intrauterine growth restriction (IUGR) are multifactorial with both intrinsic and extrinsic influences. While many studies focus on the intrinsic pathological causes, the possible long-term consequences resulting from extrinsic intrauterine physiological constraints merit additional consideration and further investigation. Infants with IUGR can exhibit early symmetric or late asymmetric growth abnormality patterns depending on the fetal stage of development, of which the latter is most common occurring in 70–80% of growth-restricted infants. Deformation is the consequence of extrinsic biomechanical factors interfering with normal growth, functioning, or positioning of the fetus in utero, typically arising during late gestation. Biomechanical forces play a critical role in the normal morphogenesis of most tissues. The magnitude and direction of force impact the form of the developing fetus, with a specific tissue response depending on its pliability and stage of development. Major uterine constraining factors include primigravida, small maternal size, uterine malformation, uterine fibromata, early pelvic engagement of the fetal head, aberrant fetal position, oligohydramnios, and multifetal gestation. Corrective mechanical forces similar to those that gave rise to the deformation to reshape the deformed structures are often used and should take advantage of the rapid postnatal growth to correct form. PMID:22888434

Granularity as a Cognitive Factor in the Effectiveness of Business Process Model Reuse

NASA Astrophysics Data System (ADS)

Holschke, Oliver; Rake, Jannis; Levina, Olga

Reusing design models is an attractive approach in business process modeling as modeling efficiency and quality of design outcomes may be significantly improved. However, reusing conceptual models is not a cost-free effort, but has to be carefully designed. While factors such as psychological anchoring and task-adequacy in reuse-based modeling tasks have been investigated, information granularity as a cognitive concept has not been at the center of empirical research yet. We hypothesize that business process granularity as a factor in design tasks under reuse has a significant impact on the effectiveness of resulting business process models. We test our hypothesis in a comparative study employing high and low granularities. The reusable processes provided were taken from widely accessible reference models for the telecommunication industry (enhanced Telecom Operations Map). First experimental results show that Recall in tasks involving coarser granularity is lower than in cases of finer granularity. These findings suggest that decision makers in business process management should be considerate with regard to the implementation of reuse mechanisms of different granularities. We realize that due to our small sample size results are not statistically significant, but this preliminary run shows that it is ready for running on a larger scale.

Deconvoluting effects of vine and soil properties on grape berry composition.

PubMed

Zerihun, Ayalsew; McClymont, Lexie; Lanyon, Dean; Goodwin, Ian; Gibberd, Mark

2015-01-01

Grape berry composition is influenced by several factors including grapevine and soil properties and their interactions. Understanding how these factors interact to determine berry composition is integral to producing berries with desired composition. Here we used extensive spatio-temporal data to identify significant vine and soil features that influence Shiraz berry composition. The concentrations of berry flavonoids (anthocyanins, tannin and total phenolics), total soluble solids and pH were typically negatively associated with canopy, crop and berry size factors whereas titratable acidity was positively associated. The strengths of the associations, however, were generally greater with the crop and berry size factors than with the canopy size factor. The analyses also resolved separate influences of berry and crop size on berry composition. Soil properties had significant influences on berry composition; however, when influences of soil factors on vine-attributes were accounted for, the apparent effects of soil factors on berry composition were largely non-existent. At each site, variations in berry composition were more strongly associated with crop and berry size than with canopy size factors. Apparent influences of soil properties on berry composition are indirect, being mediated via their effects on vine attributes (canopy, crop and berry sizes). © 2014 Society of Chemical Industry.

Growth promotion in plants by rice necrosis mosaic virus.

PubMed

Ghosh, S K

1982-08-01

Ludwigia perennis L. infected with rice necrosis mosaic virus (RNMV) showed an increase in both shoot growth and leaf size, along with characteristic chlorotic lesions on leaves. The promotion of growth over the controls extended over a considerable period of time (70 d). Inoculation with RNMV resulted in increased plant height, leaf size, stem diameter, and number and size of fiber bundles in Corchorus olitorius L., C. capsularis L., Hibiscus sabdariffa L. and H. cannabinus L.

Estimation of design space for an extrusion-spheronization process using response surface methodology and artificial neural network modelling.

PubMed

Sovány, Tamás; Tislér, Zsófia; Kristó, Katalin; Kelemen, András; Regdon, Géza

2016-09-01

The application of the Quality by Design principles is one of the key issues of the recent pharmaceutical developments. In the past decade a lot of knowledge was collected about the practical realization of the concept, but there are still a lot of unanswered questions. The key requirement of the concept is the mathematical description of the effect of the critical factors and their interactions on the critical quality attributes (CQAs) of the product. The process design space (PDS) is usually determined by the use of design of experiment (DoE) based response surface methodologies (RSM), but inaccuracies in the applied polynomial models often resulted in the over/underestimation of the real trends and changes making the calculations uncertain, especially in the edge regions of the PDS. The completion of RSM with artificial neural network (ANN) based models is therefore a commonly used method to reduce the uncertainties. Nevertheless, since the different researches are focusing on the use of a given DoE, there is lack of comparative studies on different experimental layouts. Therefore, the aim of present study was to investigate the effect of the different DoE layouts (2 level full factorial, Central Composite, Box-Behnken, 3 level fractional and 3 level full factorial design) on the model predictability and to compare model sensitivities according to the organization of the experimental data set. It was revealed that the size of the design space could differ more than 40% calculated with different polynomial models, which was associated with a considerable shift in its position when higher level layouts were applied. The shift was more considerable when the calculation was based on RSM. The model predictability was also better with ANN based models. Nevertheless, both modelling methods exhibit considerable sensitivity to the organization of the experimental data set, and the use of design layouts is recommended, where the extreme values factors are more represented. Copyright © 2016 Elsevier B.V. All rights reserved.

Work, work-life conflict and health in an industrial work environment.

PubMed

Hämmig, O; Bauer, G F

2014-01-01

Work-life conflict has been poorly studied as a cause of ill-health in occupational medicine. To study associations between physical and psychosocial working conditions, including work-life conflict on the one hand and general, physical and mental health outcomes on the other. Cross-sectional data were used from an employee survey among the workforces of four medium-sized and large companies in Switzerland. Physical work factors included five demands and exposures such as heavy loads, repetitive work and poor posture. Psychosocial factors included 14 demands and limited resources such as time pressure, overtime, monotonous work, job insecurity, low job autonomy, low social support and work-life conflict. Health outcomes studied were self-rated health, sickness absence, musculoskeletal disorders, sleep disorders, stress and burnout. There was a response rate of 49%; 2014 employees participated. All adverse working conditions were positively associated with several poor health outcomes in both men and women. After mutual adjustment for all work factors and additional covariates, only a few, mainly psychosocial work factors remained significant as risk factors for health. Work-life conflict, a largely neglected work-related psychosocial factor in occupational medicine, turned out to be the only factor that was significantly and strongly associated with all studied health outcomes and was consistently found to be the strongest or second strongest of all the studied risk factors. Even in an industrial work environment, psychosocial work factors, and particularly work-life conflict, play a key role and need to be taken into consideration in research and workplace health promotion.

Factors associated with tocolytic hospitalizations in Taiwan: evidence from a population-based and longitudinal study from 1997 to 2004

PubMed Central

2009-01-01

Background The use of tocolytic hospitalization in antenatal care is controversial and worthy of more research. We investigated individual, institutional, and area factors that affect the use of tocolytic hospitalizations in Taiwan where fertility has rapidly declined. Methods Longitudinal data from the 1996 to 2004 National Health Insurance Research Database in Taiwan were used to identify tocolytic hospitalizations. The probit model was used to estimate factors associated with tocolytic hospitalizations. Results The decline in fertility was significantly associated with the probability of tocolytic hospitalizations. Several physician and institutional factors-including physician's age, hospital ownership, accreditation status, bed size, and teaching status-were also significantly correlated to the dependent variables. Conclusions The provision of inpatient tocolysis is influenced not only by clinical considerations but also by physician, institutional, and area factors unrelated to clinical need. Fertility declines in Taiwan may have led obstetricians/gynecologists to provide more tocolysis to make up for their lost income. If the explanation is further validated, reimbursement policies may need to be reviewed to correct for overuse of inpatient tocolysis. The correlation could also be explained by the increasing use of artificial reproductive technologies and higher social value of newborns. In addition, the physician and institutional variations observed in the study indicate potential misuse of inpatient tocolysis that warrant further investigation. PMID:20021650

Using Structural Equation Modeling to Assess Functional Connectivity in the Brain: Power and Sample Size Considerations

ERIC Educational Resources Information Center

Sideridis, Georgios; Simos, Panagiotis; Papanicolaou, Andrew; Fletcher, Jack

2014-01-01

The present study assessed the impact of sample size on the power and fit of structural equation modeling applied to functional brain connectivity hypotheses. The data consisted of time-constrained minimum norm estimates of regional brain activity during performance of a reading task obtained with magnetoencephalography. Power analysis was first…

Rethinking the Health Center: Assessing Your Health Center and Setting Goals.

ERIC Educational Resources Information Center

McMillan, Nancy S.

2001-01-01

Camp health center management begins with assessing the population served, camp areas impacted, and the contract of care with parents. That information is used to plan the size of the center; its location in the camp; the type of equipment; and considerations such as medication management, infectious disease control, size of in- and out-patient…

Planning Community-Based Assessments of HIV Educational Intervention Programs in Sub-Saharan Africa

ERIC Educational Resources Information Center

Kelcey, Ben; Shen, Zuchao

2017-01-01

A key consideration in planning studies of community-based HIV education programs is identifying a sample size large enough to ensure a reasonable probability of detecting program effects if they exist. Sufficient sample sizes for community- or group-based designs are proportional to the correlation or similarity of individuals within communities.…

29 CFR 579.5 - Determining the amount of the penalty and assessing the penalty.

Code of Federal Regulations, 2010 CFR

2010-07-01

... evidence of the violation or violations and will take into consideration the size of the business of the... penalty to the size of the business of the person charged with the violation or violations, taking into...-days of hired farm labor used in pertinent calendar quarters), dollar volume of sales or business done...

A Comparison of Uniform DIF Effect Size Estimators under the MIMIC and Rasch Models

ERIC Educational Resources Information Center

Jin, Ying; Myers, Nicholas D.; Ahn, Soyeon; Penfield, Randall D.

2013-01-01

The Rasch model, a member of a larger group of models within item response theory, is widely used in empirical studies. Detection of uniform differential item functioning (DIF) within the Rasch model typically employs null hypothesis testing with a concomitant consideration of effect size (e.g., signed area [SA]). Parametric equivalence between…

Saturation in Phosphene Size with Increasing Current Levels Delivered to Human Visual Cortex.

PubMed

Bosking, William H; Sun, Ping; Ozker, Muge; Pei, Xiaomei; Foster, Brett L; Beauchamp, Michael S; Yoshor, Daniel

2017-07-26

Electrically stimulating early visual cortex results in a visual percept known as a phosphene. Although phosphenes can be evoked by a wide range of electrode sizes and current amplitudes, they are invariably described as small. To better understand this observation, we electrically stimulated 93 electrodes implanted in the visual cortex of 13 human subjects who reported phosphene size while stimulation current was varied. Phosphene size increased as the stimulation current was initially raised above threshold, but then rapidly reached saturation. Phosphene size also depended on the location of the stimulated site, with size increasing with distance from the foveal representation. We developed a model relating phosphene size to the amount of activated cortex and its location within the retinotopic map. First, a sigmoidal curve was used to predict the amount of activated cortex at a given current. Second, the amount of active cortex was converted to degrees of visual angle by multiplying by the inverse cortical magnification factor for that retinotopic location. This simple model accurately predicted phosphene size for a broad range of stimulation currents and cortical locations. The unexpected saturation in phosphene sizes suggests that the functional architecture of cerebral cortex may impose fundamental restrictions on the spread of artificially evoked activity and this may be an important consideration in the design of cortical prosthetic devices. SIGNIFICANCE STATEMENT Understanding the neural basis for phosphenes, the visual percepts created by electrical stimulation of visual cortex, is fundamental to the development of a visual cortical prosthetic. Our experiments in human subjects implanted with electrodes over visual cortex show that it is the activity of a large population of cells spread out across several millimeters of tissue that supports the perception of a phosphene. In addition, we describe an important feature of the production of phosphenes by electrical stimulation: phosphene size saturates at a relatively low current level. This finding implies that, with current methods, visual prosthetics will have a limited dynamic range available to control the production of spatial forms and that more advanced stimulation methods may be required. Copyright © 2017 the authors 0270-6474/17/377188-10$15.00/0.

The Physics of Protoplanetary Dust Agglomerates. X. High-velocity Collisions between Small and Large Dust Agglomerates as a Growth Barrier

NASA Astrophysics Data System (ADS)

Schräpler, Rainer; Blum, Jürgen; Krijt, Sebastiaan; Raabe, Jan-Hendrik

2018-01-01

In a protoplanetary disk, dust aggregates in the μm to mm size range possess mean collision velocities of 10–60 m s‑1 with respect to dm- to m-sized bodies. We performed laboratory collision experiments to explore this parameter regime and found a size- and velocity-dependent threshold between erosion and growth. By using a local Monte Carlo coagulation calculation and along with a simple semi-analytical timescale approach, we show that erosion considerably limits particle growth in protoplanetary disks and leads to a steady-state dust-size distribution from μm- to dm-sized particles.

Power Distribution System Planning with GIS Consideration

NASA Astrophysics Data System (ADS)

Wattanasophon, Sirichai; Eua-Arporn, Bundhit

This paper proposes a method for solving radial distribution system planning problems taking into account geographical information. The proposed method can automatically determine appropriate location and size of a substation, routing of feeders, and sizes of conductors while satisfying all constraints, i.e. technical constraints (voltage drop and thermal limit) and geographical constraints (obstacle, existing infrastructure, and high-cost passages). Sequential quadratic programming (SQP) and minimum path algorithm (MPA) are applied to solve the planning problem based on net price value (NPV) consideration. In addition this method integrates planner's experience and optimization process to achieve an appropriate practical solution. The proposed method has been tested with an actual distribution system, from which the results indicate that it can provide satisfactory plans.

Hydrolytic stability of pneumococcal group 6 (type 6A and 6B) capsular polysaccharides.

PubMed Central

Zon, G; Szu, S C; Egan, W; Robbins, J D; Robbins, J B

1982-01-01

The hydrolyses of the immunologically cross-reactive and constitutionally isomeric group 6 pneumococcal polysaccharides, types 6A and 6B, were investigated by 31P nuclear magnetic resonance spectroscopy, gel filtration through Sepharose 4B, reducing-sugar analysis, and rocket immunoelectrophoresis. Phosphorus nuclear magnetic resonance spectroscopy showed that cleavage of the repeating-unit phosphodiester linkages at pH 10, 60 degrees C was considerably faster (greater than 10(3) ) for the type 6A than the type 6B polysaccharide. Under these reaction conditions, 31P nuclear magnetic resonance kinetic measurements showed that the Na+ form of the type 6A polysaccharide underwent phosphodiester-linkage hydrolysis two times slower than the corresponding Ca+2 form; a stoichiometrically excess amount of Ca+2 caused a 30-fold enhancement of the latter hydrolysis rate. The spectroscopic characterization of phosphorus-containing end groups resulting from hydrolysis of the type 6A polymer provided additional mechanistic information. Heating the type 6A and 6B polysaccharides at 56 degrees C for various times led to gel filtration coefficients of distribution (Kd values) which indicated that the type 6A material underwent size reductions considerably faster than did the type 6B antigen; these increased Kd values qualitatively correlated with the loss of immunochemical reactivity measured by rocket immunoelectrophoresis. The application of a statistical theory to the depolymerization of the type 6A and 6B polysaccharides was consistent with random bond cleavage, as evidenced by the calculated versus measured gel filtration patterns. Although the molecular changes causing the size reductions were not fully elaborated, it was established that the acetal linkages of the type 6A and 6B polysaccharides were comparatively resistant to hydrolysis and that depolymerization by hydrolysis of the phosphodiester linkage was a major factor only in the type 6A structure. It was concluded that the hydrolytic stability of the type 6B antigen would favor its use in the polyvalent pneumococcal vaccine rather than the cross-reactive, but comparatively unstable, type 6A polysaccharide, if all other factors are equal. Images PMID:7107011

THE EFFECT OF PROJECTION ON DERIVED MASS-SIZE AND LINEWIDTH-SIZE RELATIONSHIPS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shetty, Rahul; Kauffmann, Jens; Goodman, Alyssa A.

2010-04-01

Power-law mass-size and linewidth-size correlations, two of 'Larson's laws', are often studied to assess the dynamical state of clumps within molecular clouds. Using the result of a hydrodynamic simulation of a molecular cloud, we investigate how geometric projection may affect the derived Larson relationships. We find that large-scale structures in the column density map have similar masses and sizes to those in the three-dimensional simulation (position-position-position, PPP). Smaller scale clumps in the column density map are measured to be more massive than the PPP clumps, due to the projection of all emitting gas along lines of sight. Further, due tomore » projection effects, structures in a synthetic spectral observation (position-position-velocity, PPV) may not necessarily correlate with physical structures in the simulation. In considering the turbulent velocities only, the linewidth-size relationship in the PPV cube is appreciably different from that measured from the simulation. Including thermal pressure in the simulated line widths imposes a minimum line width, which results in a better agreement in the slopes of the linewidth-size relationships, though there are still discrepancies in the offsets, as well as considerable scatter. Employing commonly used assumptions in a virial analysis, we find similarities in the computed virial parameters of the structures in the PPV and PPP cubes. However, due to the discrepancies in the linewidth-size and mass-size relationships in the PPP and PPV cubes, we caution that applying a virial analysis to observed clouds may be misleading due to geometric projection effects. We speculate that consideration of physical processes beyond kinetic and gravitational pressure would be required for accurately assessing whether complex clouds, such as those with highly filamentary structure, are bound.« less

Women and substance abuse: gender, age, and cultural considerations.

PubMed

Stevens, Sally J; Andrade, Rosi A C; Ruiz, Bridget S

2009-01-01

Historically, data has shown that a smaller percentage of women use alcohol and illicit substances compared to men, and that frequency of use has been lower among women compared to use among men. Although this data on usage may be true, researchers also acknowledge that substance use among women has been a hidden issue, one not realistically acknowledged by society, especially prior to the mid-1960s. Along with this, more recent data indicates that rates of substance use among women are increasing. Factors contributing to this increase in substance abuse have begun to receive considerable attention, and recent research suggests that many issues exist that are unique to substance use among women. The purpose of this article is to discuss gender specific considerations in women's substance abuse by examining the history of substance use among women; analyzing gender-specific factors, including physiological factors, trauma-related factors, mental health issues, and cultural considerations that impact on women's substance use; articulating treatment approaches for working with substance abusing women and girls; and providing recommendations for further research in this area.

Size- and time-dependent growth properties of human induced pluripotent stem cells in the culture of single aggregate.

PubMed

Nath, Suman C; Horie, Masanobu; Nagamori, Eiji; Kino-Oka, Masahiro

2017-10-01

Aggregate culture of human induced pluripotent stem cells (hiPSCs) is a promising method to obtain high number of cells for cell therapy applications. This study quantitatively evaluated the effects of initial cell number and culture time on the growth of hiPSCs in the culture of single aggregate. Small size aggregates ((1.1 ± 0.4) × 10 1 -(2.8 ± 0.5) × 10 1 cells/aggregate) showed a lower growth rate in comparison to medium size aggregates ((8.8 ± 0.8) × 10 1 -(6.8 ± 1.1) × 10 2 cells/aggregate) during early-stage of culture (24-72 h). However, when small size aggregates were cultured in conditioned medium, their growth rate increased significantly. On the other hand, large size aggregates ((1.1 ± 0.2) × 10 3 -(3.5 ± 1.1) × 10 3 cells/aggregate) showed a lower growth rate and lower expression level of proliferation marker (ki-67) in the center region of aggregate in comparison to medium size aggregate during early-stage of culture. Medium size aggregates showed the highest growth rate during early-stage of culture. Furthermore, hiPSCs proliferation was dependent on culture time because the growth rate decreased significantly during late-stage of culture (72-120 h) at which point collagen type I accumulated on the periphery of aggregate, suggesting blockage of diffusive transport of nutrients, oxygen and metabolites into and out of the aggregates. Consideration of initial cell number and culture time are important to maintain balance between autocrine factors secretion and extracellular matrix accumulation on the aggregate periphery to achieve optimal growth of hiPSCs in the culture of single aggregate. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

Examination of a high resolution laser optical plankton counter and FlowCAM for measuring plankton concentration and size

NASA Astrophysics Data System (ADS)

Kydd, Jocelyn; Rajakaruna, Harshana; Briski, Elizabeta; Bailey, Sarah

2018-03-01

Many commercial ships will soon begin to use treatment systems to manage their ballast water and reduce the global transfer of harmful aquatic organisms and pathogens in accordance with upcoming International Maritime Organization regulations. As a result, rapid and accurate automated methods will be needed to monitoring compliance of ships' ballast water. We examined two automated particle counters for monitoring organisms ≥ 50 μm in minimum dimension: a High Resolution Laser Optical Plankton Counter (HR-LOPC), and a Flow Cytometer with digital imaging Microscope (FlowCAM), in comparison to traditional (manual) microscopy considering plankton concentration, size frequency distributions and particle size measurements. The automated tools tended to underestimate particle concentration compared to standard microscopy, but gave similar results in terms of relative abundance of individual taxa. For most taxa, particle size measurements generated by FlowCAM ABD (Area Based Diameter) were more similar to microscope measurements than were those by FlowCAM ESD (Equivalent Spherical Diameter), though there was a mismatch in size estimates for some organisms between the FlowCAM ABD and microscope due to orientation and complex morphology. When a single problematic taxon is very abundant, the resulting size frequency distribution curves can become skewed, as was observed with Asterionella in this study. In particular, special consideration is needed when utilizing automated tools to analyse samples containing colonial species. Re-analysis of the size frequency distributions with the removal of Asterionella from FlowCAM and microscope data resulted in more similar curves across methods with FlowCAM ABD having the best fit compared to the microscope, although microscope concentration estimates were still significantly higher than estimates from the other methods. The results of our study indicate that both automated tools can generate frequency distributions of particles that might be particularly useful if correction factors can be developed for known differences in well-studied aquatic ecosystems.

The Effect of Different Oceanic Abiotic Factors on Prokaryotic Body Sizes

NASA Astrophysics Data System (ADS)

Pidathala, S.; Bellon, M.; Heim, N.; Payne, J.

2016-12-01

We are studying the impact of abiotic factors in the Pacific and Atlantic on prokaryotic body sizes and genome sizes because we are interested in the manner in which abiotic factors influence genome sizes independent of their influence on body sizes. Some research has been done in the past on marine bacterial evolution, including data collection on marine ecology in relation to bacterial body sizes (Straza 2009). We are using the abiotic factors: temperature, salinity, and pH to compare the biovolumes/genome sizes of different phyla by using R. We made 9 scatter plots to model these relationships. Regardless of the phyla or the ocean, we found that there is no relation between pH, temperature, and body size, with several exceptions: Deinococcus. thermus has an indirect relationship with size in respect to temperature; size only correlates to temperature for phyla that are thermophiles. We also found that bacteria like D. thermus and Thermotogae are taxa only found in higher temperatures. Additionally, almost all phyla have genome sizes restricted by certain pH levels:, Proteobacteria only reach genomes with acidity levels greater than 6. In terms of salinity levels, certain bacteria are only found within a small range, and others, like Proteobacteria, can only reach genomes at low salinity levels. Finally, Proteobacteria have large genome sizes between 30 and 40 °, and Crenarchaeota have constant genome sizes in higher temperatures. Conclusively, we discovered that these abiotic factors generally do not affect body size, with the exception of D. thermus' indirect relationship to temperature due to its small biovolume in high temperatures. However, we determined that these abiotic factors have a great impact on genome sizes. This is due to genome size independence from body size. Also, genome size could have served as an adaptive feature for bacteria in marine environments, explaining why different phyla may have diverged to accommodate their lifestyles.

Impact evaluation of environmental factors on respiratory function of asthma patients living in urban territory.

PubMed

Veremchuk, Lyudmila V; Tsarouhas, Konstantinos; Vitkina, Tatyana I; Mineeva, Elena E; Gvozdenko, Tatyana A; Antonyuk, Marina V; Rakitskii, Valeri N; Sidletskaya, Karolina A; Tsatsakis, Aristidis M; Golokhvast, Kirill S

2018-04-01

Environmental pollution, local climatic conditions and their association with the prevalence and exacerbation of asthma are topics of intense current medical investigation. Air pollution in the area of Vladivostock was estimated both by the index of emission volumes of "air gaseous components" (nitrogen oxide and nitrogen dioxide, formaldehyde, hydrogen sulfide, carbon monoxide) in urban atmosphere and by mass spectrometric analysis of precipitates in snow samples. A total of 172 local asthma patients (101 controlled-asthma patients-CAP and 71 non-controlled asthma patients - nCAP) were evaluated with the use of spirometry and body plethysmography. Airway obstruction reversibility was evaluated with the use of an inhaled bronchodilator. Using discriminant analysis the association of environmental parameters with clinical indices of asthma patients is explored and thresholds of impact are established. CAP presented high sensitivity to large-size suspended air particles and to several of the studied climatic parameters. Discriminant analysis showed high values of Wilks' lambda index (α = 0.69-0.81), which implies limited influence of environmental factors on the respiratory parameters of CAP. nCAP were more sensitive and susceptible to the majority of the environmental factors studied, including air suspended toxic metals particles (Cr, Zn and Ni). Air suspended particles showed higher tendency for pathogenicity in nCAP population than in the CAP, with a wider range of particle sizes being involved. Dust fractions ranging from 0 to 1 μm and from 50 to 100 μm were additionally implicated compared to CAP group. Considerably lowest thresholds levels of impact are calculated for nCAP. Copyright © 2017. Published by Elsevier Ltd.

Risk factors associated with diarrhea in Danish commercial mink (Neovison vison) during the pre-weaning period.

PubMed

Birch, Julie Melsted; Agger, Jens Frederik; Dahlin, Christina; Jensen, Vibeke Frøkjær; Hammer, Anne Sofie; Struve, Tina; Jensen, Henrik Elvang

2017-06-29

Pre-weaning diarrhea in mink, also known as "sticky kits", is a syndrome and outbreaks occur every year on commercial mink farms in all mink producing countries. Morbidity and mortality can be considerable on a farm with huge economic consequences for the farmer as well as compromised welfare for the mink kits. Although efforts have been taken to identify etiologic agents involved in outbreaks, the syndrome is still regarded as multifactorial and recurring problems on the same farms draw attention to management and environmental risk factors. In the pre-weaning period from May to June 2015, a case control study was carried out on 30 Danish mink farms. Data concerning management, biosecurity, hygiene, feed consumption, antibacterial prescription and production efficiency were analyzed. The proportion of 1-year old females, farm size (total number of females), energy supply per female in the late gestation period, and dogs accessing the farm area were significantly associated with being a case farm. Case farms were prescribed almost twice the amount of antibacterials per gestational unit (female and litter) as in control farms. Farmers on case farms spent significantly more time nursing and treating the animals and experienced more females with mastitis compared to farmers on control farms. No significant differences in cleaning practices or hygienic measures between case and control farms were found and there were no differences in drinking water quality, bedding material, composition neither of color types nor in management regarding litter equalization. Results from this study showed an association between the occurrence of pre-weaning diarrhea on mink farms and parity profile, farm size and feeding intensity in the gestational period. The access of dogs to the farm area was a significant risk factor, but needs further clarification.

Sex, eye size, and the rate of myopic eye growth due to form deprivation in outbred white leghorn chickens.

PubMed

Chen, Yen-Po; Prashar, Ankush; Hocking, Paul M; Erichsen, Jonathan T; To, Chi Ho; Schaeffel, Frank; Guggenheim, Jeremy A

2010-02-01

There is considerable variation in the degree of form-deprivation myopia (FDM) induced in chickens by a uniform treatment regimen. Sex and pretreatment eye size have been found to be predictive of the rate of FD-induced eye growth. Therefore, this study was undertaken to test whether the greater rate of myopic eye growth in males is a consequence of their larger eyes or of some other aspect of their sex. Monocular FDM was induced in 4-day-old White Leghorn chicks for 4 days. Changes in ocular component dimensions and refractive error were assessed by A-scan ultrasonography and retinoscopy, respectively. Sex identification of chicks was performed by DNA test. Relationships between traits were assessed by multiple regression. FD produced (mean +/- SD) 13.47 +/- 3.12 D of myopia and 0.47 +/- 0.14 mm of vitreous chamber elongation. The level of induced myopia was not significantly different between the sexes, but the males had larger eyes initially and showed greater myopic eye growth than did the females. In multiple linear regression analysis, the partial correlation between sex and the degree of induced eye growth remained significant (P = 0.008) after adjustment for eye size, whereas the partial correlation between initial eye size and the degree of induced eye growth was no longer significant after adjustment for sex (P = 0.11). After adjustment for other factors, the chicks' sex accounted for 6.4% of the variation in FD-induced vitreous chamber elongation. The sex of the chick influences the rate of experimentally induced myopic eye growth, independent of its effects on eye size.

Size Dependent Elemental Composition of Road-Associated Particles

PubMed Central

McKenzie, Erica R.; Wong, Carol M.; Green, Peter G.; Kayhanian, Masoud; Young, Thomas M.

2009-01-01

Stormwater particles often provide transport for metals and other contaminants, however only larger particles are effectively removed by typical best management practices. Fine particles and their associated constituents are more likely to reach receiving waters; this merits further investigation regarding the metal contribution of fine (dp<10 μm) and very fine (dp <1.5 μm) particles. Road associated particles were collected by vacuuming a road surface and by collecting highway stormwater runoff. A cell sorter was employed to sort road associated particles into four size ranges: 0.1–0.3, 0.3–0.5, 0.5–1.0, and 1.0–1.5 μm. These very fine particles, along with six particle size ranges (total range <2–63 μm) separated using a settling column, were analyzed for Al, Mn, Fe, Cr, Ni, Cu, Zn, and Pb using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Enrichment factors (EFs), calculated using Al as a basis to represent crustal contributions, were similar for the vacuumed road dust and the stormwater runoff. Fe and Mn were minimally depleted (0.1x) or near unity for all size ranges (Fe EF range 0.01–3.7; Mn EF range 0.02–10.6). Cr, Ni, Cu, Zn, and Pb were moderately (10x) to considerably (>100x) enriched for most size ranges; these metals were most enriched in the very fine fractions (max EF~4900 in Zn, 0.1–0.3 μm). Based on this preliminary study, a cell sorter is an acceptable means of fractionating aqueous particles of diameter 0.1–1.5 μm. In spite of their minimal relative mass contribution, the very fine particles are environmentally relevant due to their mobility and enrichment in potentially toxic metals.. PMID:18433840

A Parameter Study on the Effect of Impactor Size for NASA’s DART Mission

NASA Astrophysics Data System (ADS)

Truitt, Amanda; Weaver, Robert; Gisler, Galen

2018-06-01

We have modeled the impact of the Double Asteroid Redirection Test (DART) spacecraft into the binary near-Earth asteroid (65803) Didymos. While the primary object is approximately 800 meters across, its secondary body (“moonlet” Didymoon) has a diameter of 150 meters, which is thought to be a much more typical size for the kind of asteroid that would pose a hazard to Earth. DART will be the first demonstration of the kinetic impact technique to change the motion of an asteroid in space, an important consideration for understanding our capabilities in planetary defense of Near-Earth Asteroids. Recent modeling of this impact has used full-density solid aluminum spheres with a mass of approximately 500 kg. Many of the published scaling laws for crater size and diameter as well as ejecta modeling assume this type of impactor, although the actual spacecraft shape being considered for the DART Mission impact is not solid and does not contain a solid dedicated kinetic impactor – rather, the spacecraft itself is considered the impactor. Since the 500 kg hollow spacecraft is significantly larger (~100 x 100 x 200 cm) in size than a solid aluminum sphere (radius ~ 36 cm) the resulting impact dynamics are quite different. Here we have modeled both types of impacts and compare the results of the simulations for crater size, depth, and ejecta for a solid sphere (R = 36 cm) and cylindrical spacecraft (R = 20, 50, and 100 cm), while maintaining a constant mass and material density. This work will allow for a more robust comparison of the momentum enhancement β-factor, which describes the gain in a momentum transfer exerted by the impacting spacecraft on a Near-Earth Object due to ejecta momentum escape. (LA-UR-18-21571)

Role of Beam Spot Size in Heating Targets at Depth.

PubMed

Ross, E Victor; Childs, James

2015-12-01

Wavelength, fluence and pulse width are primary device parameters for the treatment of skin and hair conditions. Wavelength selection is based on tissue scatter and target chromophores. Pulse width is chosen to optimize target heating. Energy absorbed by a target is determined by fluence and spot size of the light source as well as the depth of the target. We conducted an in vitro skin study and simulations to compare heating of a target at a particular depth versus spot size. Porcine skin and fat tissue were prepared and separated to form a 2mm skin layer above a 1 cm thick fat layer. A 50 μm thermocouple was placed between the layers and centered beneath a 23 x 38 mm treatment window of an 805 nm diode laser device (Vectus, Cynosure, Westford, MA). Apertures provided various incident beam spot sizes and the temperature rise of the thermocouple was measured for a fixed fluence. The 2mm deep target's temperature rise versus treatment area showed two regimes with different positive slopes. The first regime up to approximately 1 cm(2) area has a greater temperature rise versus area than that for the regime greater than 1 cm(2). The slope in the second regime is nonetheless appreciable and provides a fluence reduction factor for skin safety. The same temperature rise in a target at 2 mm depth (typical hair bulb depth in some areas) is realized by increasing the area from 1 to 4 cm(2) while reducing the fluence by half. The role of spot size and in situ beam divergence is an important consideration to determine optimum fluence settings that increase skin safety when treating deeper targets.

Determination of hydrogen abundance in selected lunar soils

NASA Technical Reports Server (NTRS)

Bustin, Roberta

1987-01-01

Hydrogen was implanted in lunar soil through solar wind activity. In order to determine the feasibility of utilizing this solar wind hydrogen, it is necessary to know not only hydrogen abundances in bulk soils from a variety of locations but also the distribution of hydrogen within a given soil. Hydrogen distribution in bulk soils, grain size separates, mineral types, and core samples was investigated. Hydrogen was found in all samples studied. The amount varied considerably, depending on soil maturity, mineral types present, grain size distribution, and depth. Hydrogen implantation is definitely a surface phenomenon. However, as constructional particles are formed, previously exposed surfaces become embedded within particles, causing an enrichment of hydrogen in these species. In view of possibly extracting the hydrogen for use on the lunar surface, it is encouraging to know that hydrogen is present to a considerable depth and not only in the upper few millimeters. Based on these preliminary studies, extraction of solar wind hydrogen from lunar soil appears feasible, particulary if some kind of grain size separation is possible.

Eye-blink behaviors in 71 species of primates.

PubMed

Tada, Hideoki; Omori, Yasuko; Hirokawa, Kumi; Ohira, Hideki; Tomonaga, Masaki

2013-01-01

The present study was performed to investigate the associations between eye-blink behaviors and various other factors in primates. We video-recorded 141 individuals across 71 primate species and analyzed the blink rate, blink duration, and "isolated" blink ratio (i.e., blinks without eye or head movement) in relation to activity rhythms, habitat types, group size, and body size factors. The results showed close relationships between three types of eye-blink measures and body size factors. All of these measures increased as a function of body weight. In addition, diurnal primates showed more blinks than nocturnal species even after controlling for body size factors. The most important findings were the relationships between eye-blink behaviors and social factors, e.g., group size. Among diurnal primates, only the blink rate was significantly correlated even after controlling for body size factors. The blink rate increased as the group size increased. Enlargement of the neocortex is strongly correlated with group size in primate species and considered strong evidence for the social brain hypothesis. Our results suggest that spontaneous eye-blinks have acquired a role in social communication, similar to grooming, to adapt to complex social living during primate evolution.

Eye-Blink Behaviors in 71 Species of Primates

PubMed Central

Tada, Hideoki; Omori, Yasuko; Hirokawa, Kumi; Ohira, Hideki; Tomonaga, Masaki

2013-01-01

The present study was performed to investigate the associations between eye-blink behaviors and various other factors in primates. We video-recorded 141 individuals across 71 primate species and analyzed the blink rate, blink duration, and “isolated” blink ratio (i.e., blinks without eye or head movement) in relation to activity rhythms, habitat types, group size, and body size factors. The results showed close relationships between three types of eye-blink measures and body size factors. All of these measures increased as a function of body weight. In addition, diurnal primates showed more blinks than nocturnal species even after controlling for body size factors. The most important findings were the relationships between eye-blink behaviors and social factors, e.g., group size. Among diurnal primates, only the blink rate was significantly correlated even after controlling for body size factors. The blink rate increased as the group size increased. Enlargement of the neocortex is strongly correlated with group size in primate species and considered strong evidence for the social brain hypothesis. Our results suggest that spontaneous eye-blinks have acquired a role in social communication, similar to grooming, to adapt to complex social living during primate evolution. PMID:23741522

Grays Harbor and Chehalis River Improvements to Navigation Environmental Studies. Grays Harbor Ocean Disposal Study. Literature Review and Preliminary Benthic Sampling,

DTIC Science & Technology

1980-05-01

transects extending approximately 16 kilometers from the mouth of Grays Harbor. Sub- samples were taken for grain size analysis and wood content. The...samples were thert was".d on a 1.0 mm screen to separate benthic organisms from non-living materials. Consideration of the grain size analysis ...Nutrients 17 B. Field Study 18 Methods 18 Grain Size Analysis 18 Wood Analysis 21 Wood Fragments 21 Sediment Types 21 Discussion 24 IV. BIOLOGICAL

Preparing the Production of a New Product in Small and Medium-Sized Enterprises by Using the Method of Projects Management

NASA Astrophysics Data System (ADS)

Bijańska, Jolanta; Wodarski, Krzysztof; Wójcik, Janusz

2016-06-01

Efficient and effective preparation the production of new products is important requirement for a functioning and development of small and medium-sized enterprises. One of the methods, which support the fulfilment of this condition is project management. This publication presents the results of considerations, which are aimed at developing a project management model of preparation the production of a new product, adopted to specificity of small and medium-sized enterprises.

Primary lithium batteries, some consumer considerations

NASA Technical Reports Server (NTRS)

Bro, P.

1983-01-01

In order to determine whether larger size lithium batteries would be commercially marketable, the performance of several D size lithium batteries was compared with that of an equivalent alkaline manganese battery, and the relative costs of the different systems were compared. It is concluded that opportunities exist in the consumer market for the larger sizes of the low rate and moderate rate lithium batteries, and that the high rate lithium batteries need further improvements before they can be recommended for consumer applications.

Influence of multidroplet size distribution on icing collection efficiency

NASA Technical Reports Server (NTRS)

Chang, H.-P.; Kimble, K. R.; Frost, W.; Shaw, R. J.

1983-01-01

Calculation of collection efficiencies of two-dimensional airfoils for a monodispersed droplet icing cloud and a multidispersed droplet is carried out. Comparison is made with the experimental results reported in the NACA Technical Note series. The results of the study show considerably improved agreement with experiment when multidroplet size distributions are employed. The study then investigates the effect of collection efficiency on airborne particle droplet size sampling instruments. The biased effect introduced due to sampling from different collection volumes is predicted.

Electrical Sensing Zone Particle Analyzer for Measuring Germination of Fungal Spores in the Presence of Other Particles1

PubMed Central

Santoro, T.; Stotzky, G.; Rem, L. T.

1967-01-01

Microscopic, respirometric, and electronic sizing methods for measuring germination of fungal spores were compared. With the electronic sizing method, early stages of germination (i.e., spore swelling) were detected long before germ tube emergence or significant changes in respiratory rates were observed. This method, which is rapid, easy, sensitive, and reproducible, also permits measuring the germination of spores when similar-size particles are present in concentrations considerably in excess of the number of spores. PMID:6069161

Understanding how lake populations of arctic char are structured and function with special consideration of the potential effects of climate change: a multi-faceted approach.

PubMed

Budy, Phaedra; Luecke, Chris

2014-09-01

Size dimorphism in fish populations, both its causes and consequences, has been an area of considerable focus; however, uncertainty remains whether size dimorphism is dynamic or stabilizing and about the role of exogenous factors. Here, we explored patterns among empirical vital rates, population structure, abundance and trend, and predicted the effects of climate change on populations of arctic char (Salvelinus alpinus) in two lakes. Both populations cycle dramatically between dominance by small (≤300 mm) and large (>300 mm) char. Apparent survival (Φ) and specific growth rates (SGR) were relatively high (40-96%; SGR range 0.03-1.5%) and comparable to those of conspecifics at lower latitudes. Climate change scenarios mimicked observed patterns of warming and resulted in temperatures closer to optimal for char growth (15.15 °C) and a longer growing season. An increase in consumption rates (28-34%) under climate change scenarios led to much greater growth rates (23-34%). Higher growth rates predicted under climate change resulted in an even greater predicted amplitude of cycles in population structure as well as an increase in reproductive output (Ro) and decrease in generation time (Go). Collectively, these results indicate arctic char populations (not just individuals) are extremely sensitive to small changes in the number of ice-free days. We hypothesize years with a longer growing season, predicted to occur more often under climate change, produce elevated growth rates of small char and act in a manner similar to a "resource pulse," allowing a sub-set of small char to "break through," thus setting the cycle in population structure.

Understanding how lake populations of arctic char are structured and function with special consideration of the potential effects of climate change: A multi-faceted approach.

USGS Publications Warehouse

Budy, Phaedra; Luecke, Chris

2014-01-01

Size dimorphism in fish populations, both its causes and consequences, has been an area of considerable focus; however, uncertainty remains whether size dimorphism is dynamic or stabilizing and about the role of exogenous factors. Here, we explored patterns among empirical vital rates, population structure, abundance and trend, and predicted the effects of climate change on populations of arctic char (Salvelinus alpinus) in two lakes. Both populations cycle dramatically between dominance by small (≤300 mm) and large (>300 mm) char. Apparent survival (Φ) and specific growth rates (SGR) were relatively high (40–96 %; SGR range 0.03–1.5 %) and comparable to those of conspecifics at lower latitudes. Climate change scenarios mimicked observed patterns of warming and resulted in temperatures closer to optimal for char growth (15.15 °C) and a longer growing season. An increase in consumption rates (28–34 %) under climate change scenarios led to much greater growth rates (23–34 %). Higher growth rates predicted under climate change resulted in an even greater predicted amplitude of cycles in population structure as well as an increase in reproductive output (Ro) and decrease in generation time (Go). Collectively, these results indicate arctic char populations (not just individuals) are extremely sensitive to small changes in the number of ice-free days. We hypothesize years with a longer growing season, predicted to occur more often under climate change, produce elevated growth rates of small char and act in a manner similar to a “resource pulse,” allowing a sub-set of small char to “break through,” thus setting the cycle in population structure.

Assessment of reproductive parameters in female Dwarf goat (Capra hircus) on the basis of progesterone profiles.

PubMed

Khanum, Shahnaz Adeeb; Hussain, Mujahid; Kausar, Rehana

2007-12-01

A study was undertaken to look into the reproductive performance of female Dwarf goats reared under traditional conditions at NIAB Farm, Faisalabad, Pakistan. The serum progesterone profile was used to monitor various reproductive parameters (length of postpartum period, resumption of cyclicity, gestation period, prepartum period, parturition) in two lots of goats. Litter size, birth weight of kids and kidding interval were also observed. Most of the animals conceived within 15-59 days of postpartum period. All the does conceived at first or second estrus. During gestation period, higher levels of progesterone were maintained with wide variations falling in the range of 3-13 ng ml(-1). However, a few days before parturition a decline was noticed at 6+/-0.9 days and it reached to the basal level of 0.1 ng ml(-1) after the completion of parturition process. The length of gestation period was found to be 145.8+/-5 days in the first lot and 145.2+/-4 days in the second lot. A very short kidding interval (203.7+/-46 days) and considerably bigger litter size (1.8+/-0.8) was observed. All the parturitions were normal and a considerable weight gain (8.2+/-0.3 kg) of mothers was recorded during pregnancy. The initial birth weight of kids was averaged as 2.1+/-0.5 kg in the first and 1.6+/-0.2 kg in the second lot. It was concluded that Dwarf goat has short gestation length, postpartum period and kidding interval along with multiple births being common. Due to these factors, its reproductive efficiency can be exploited for efficient goat meat production.

Sex allocation and secondary sex ratio in Cuban boa ( Chilabothrus angulifer): mother's body size affects the ratio between sons and daughters

NASA Astrophysics Data System (ADS)

Frynta, Daniel; Vejvodová, Tereza; Šimková, Olga

2016-06-01

Secondary sex ratios of animals with genetically determined sex may considerably deviate from equality. These deviations may be attributed to several proximate and ultimate factors. Sex ratio theory explains some of them as strategic decisions of mothers improving their fitness by selective investment in sons or daughters, e.g. local resource competition hypothesis (LRC) suggests that philopatric females tend to produce litters with male-biased sex ratios to avoid future competition with their daughters. Until now, only little attention has been paid to examine predictions of sex ratio theory in snakes possessing genetic sex determination and exhibiting large variance in allocation of maternal investment. Cuban boa is an endemic viviparous snake producing large-bodied newborns (˜200 g). Extremely high maternal investment in each offspring increases importance of sex allocation. In a captive colony, we collected breeding records of 42 mothers, 62 litters and 306 newborns and examined secondary sex ratios (SR) and sexual size dimorphism (SSD) of newborns. None of the examined morphometric traits of neonates appeared sexually dimorphic. The sex ratio was slightly male biased (174 males versus 132 females) and litter sex ratio significantly decreased with female snout-vent length. We interpret this relationship as an additional support for LRC as competition between mothers and daughters increases with similarity of body sizes between competing snakes.

Antarctic glacial history from numerical models and continental margin sediments

USGS Publications Warehouse

Barker, P.F.; Barrett, P.J.; Cooper, A. K.; Huybrechts, P.

1999-01-01

The climate record of glacially transported sediments in prograded wedges around the Antarctic outer continental shelf, and their derivatives in continental rise drifts, may be combined to produce an Antarctic ice sheet history, using numerical models of ice sheet response to temperature and sea-level change. Examination of published models suggests several preliminary conclusions about ice sheet history. The ice sheet's present high sensitivity to sea-level change at short (orbital) periods was developed gradually as its size increased, replacing a declining sensitivity to temperature. Models suggest that the ice sheet grew abruptly to 40% (or possibly more) of its present size at the Eocene-Oligocene boundary, mainly as a result of its own temperature sensitivity. A large but more gradual middle Miocene change was externally driven, probably by development of the Antarctic Circumpolar Current (ACC) and Polar Front, provided that a few million years' delay can be explained. The Oligocene ice sheet varied considerably in size and areal extent, but the late Miocene ice sheet was more stable, though significantly warmer than today's. This difference probably relates to the confining effect of the Antarctic continental margin. Present-day numerical models of ice sheet development are sufficient to guide current sampling plans, but sea-ice formation, polar wander, basal topography and ice streaming can be identified as factors meriting additional modelling effort in the future.

Measuring the emulsification dynamics and stability of self-emulsifying drug delivery systems.

PubMed

Vasconcelos, Teófilo; Marques, Sara; Sarmento, Bruno

2018-02-01

Self-emulsifying drug delivery systems (SEDDS) are one of the most promising technologies in the drug delivery field, particularly for addressing solubility and bioavailability issues of drugs. The development of these drug carriers excessively relies in visual observations and indirect determinations. The present manuscript intended to describe a method able to measure the emulsification of SEDDS, both micro and nano-emulsions, able to measure the droplet size and to evaluate the physical stability of these formulations. Additionally, a new process to evaluate the physical stability of SEDDS after emulsification was also proposed, based on a cycle of mechanical stress followed by a resting period. The use of a multiparameter continuous evaluation during the emulsification process and stability was of upmost value to understand SEDDS emulsification process. Based on this method, SEDDS were classified as fast and slow emulsifiers. Moreover, emulsification process and stabilization of emulsion was subject of several considerations regarding the composition of SEDDS as major factor that affects stability to physical stress and the use of multicomponent with different properties to develop a stable and robust SEDDS formulation. Drug loading level is herein suggested to impact droplets size of SEDDS after dispersion and SEDDS stability to stress conditions. The proposed protocol allows an online measurement of SEDDS droplet size during emulsification and a rationale selection of excipients based on its emulsification and stabilization performance. Copyright © 2017. Published by Elsevier B.V.

Sex allocation and secondary sex ratio in Cuban boa (Chilabothrus angulifer): mother's body size affects the ratio between sons and daughters.

PubMed

Frynta, Daniel; Vejvodová, Tereza; Šimková, Olga

2016-06-01

Secondary sex ratios of animals with genetically determined sex may considerably deviate from equality. These deviations may be attributed to several proximate and ultimate factors. Sex ratio theory explains some of them as strategic decisions of mothers improving their fitness by selective investment in sons or daughters, e.g. local resource competition hypothesis (LRC) suggests that philopatric females tend to produce litters with male-biased sex ratios to avoid future competition with their daughters. Until now, only little attention has been paid to examine predictions of sex ratio theory in snakes possessing genetic sex determination and exhibiting large variance in allocation of maternal investment. Cuban boa is an endemic viviparous snake producing large-bodied newborns (∼200 g). Extremely high maternal investment in each offspring increases importance of sex allocation. In a captive colony, we collected breeding records of 42 mothers, 62 litters and 306 newborns and examined secondary sex ratios (SR) and sexual size dimorphism (SSD) of newborns. None of the examined morphometric traits of neonates appeared sexually dimorphic. The sex ratio was slightly male biased (174 males versus 132 females) and litter sex ratio significantly decreased with female snout-vent length. We interpret this relationship as an additional support for LRC as competition between mothers and daughters increases with similarity of body sizes between competing snakes.

Challenges for the functional diffusion map in pediatric brain tumors

PubMed Central

Grech-Sollars, Matthew; Saunders, Dawn E.; Phipps, Kim P.; Kaur, Ramneek; Paine, Simon M.L.; Jacques, Thomas S.; Clayden, Jonathan D.; Clark, Chris A.

2014-01-01

Background The functional diffusion map (fDM) has been suggested as a tool for early detection of tumor treatment efficacy. We aim to study 3 factors that could act as potential confounders in the fDM: areas of necrosis, tumor grade, and change in tumor size. Methods Thirty-four pediatric patients with brain tumors were enrolled in a retrospective study, approved by the local ethics committee, to examine the fDM. Tumors were selected to encompass a range of types and grades. A qualitative analysis was carried out to compare how fDM findings may be affected by each of the 3 confounders by comparing fDM findings to clinical image reports. Results Results show that the fDM in areas of necrosis do not discriminate between treatment response and tumor progression. Furthermore, tumor grade alters the behavior of the fDM: a decrease in apparent diffusion coefficient (ADC) is a sign of tumor progression in high-grade tumors and treatment response in low-grade tumors. Our results also suggest using only tumor area overlap between the 2 time points analyzed for the fDM in tumors of varying size. Conclusions Interpretation of fDM results needs to take into account the underlying biology of both tumor and healthy tissue. Careful interpretation of the results is required with due consideration to areas of necrosis, tumor grade, and change in tumor size. PMID:24305721

Kinetics of cellular uptake of viruses and nanoparticles via clathrin-mediated endocytosis

NASA Astrophysics Data System (ADS)

Banerjee, Anand; Berezhkovskii, Alexander; Nossal, Ralph

2016-02-01

Several viruses exploit clathrin-mediated endocytosis to gain entry into host cells. This process is also used extensively in biomedical applications to deliver nanoparticles (NPs) to diseased cells. The internalization of these nano-objects is controlled by the assembly of a clathrin-containing protein coat on the cytoplasmic side of the plasma membrane, which drives the invagination of the membrane and the formation of a cargo-containing endocytic vesicle. Current theoretical models of receptor-mediated endocytosis of viruses and NPs do not explicitly take coat assembly into consideration. In this paper we study cellular uptake of viruses and NPs with a focus on coat assembly. We characterize the internalization process by the mean time between the binding of a particle to the membrane and its entry into the cell. Using a coarse-grained model which maps the stochastic dynamics of coat formation onto a one-dimensional random walk, we derive an analytical formula for this quantity. A study of the dependence of the mean internalization time on NP size shows that there is an upper bound above which this time becomes extremely large, and an optimal size at which it attains a minimum. Our estimates of these sizes compare well with experimental data. We also study the sensitivity of the obtained results on coat parameters to identify factors which significantly affect the internalization kinetics.

A high stellar velocity dispersion for a compact massive galaxy at redshift z = 2.186.

PubMed

van Dokkum, Pieter G; Kriek, Mariska; Franx, Marijn

2009-08-06

Recent studies have found that the oldest and most luminous galaxies in the early Universe are surprisingly compact, having stellar masses similar to present-day elliptical galaxies but much smaller sizes. This finding has attracted considerable attention, as it suggests that massive galaxies have grown in size by a factor of about five over the past ten billion years (10 Gyr). A key test of these results is a determination of the stellar kinematics of one of the compact galaxies: if the sizes of these objects are as extreme as has been claimed, their stars are expected to have much higher velocities than those in present-day galaxies of the same mass. Here we report a measurement of the stellar velocity dispersion of a massive compact galaxy at redshift z = 2.186, corresponding to a look-back time of 10.7 Gyr. The velocity dispersion is very high at km s(-1), consistent with the mass and compactness of the galaxy inferred from photometric data. This would indicate significant recent structural and dynamical evolution of massive galaxies over the past 10 Gyr. The uncertainty in the dispersion was determined from simulations that include the effects of noise and template mismatch. However, we cannot exclude the possibility that some subtle systematic effect may have influenced the analysis, given the low signal-to-noise ratio of our spectrum.

Can mindfulness-based interventions influence cognitive functioning in older adults? A review and considerations for future research.

PubMed

Berk, Lotte; van Boxtel, Martin; van Os, Jim

2017-11-01

An increased need exists to examine factors that protect against age-related cognitive decline. There is preliminary evidence that meditation can improve cognitive function. However, most studies are cross-sectional and examine a wide variety of meditation techniques. This review focuses on the standard eight-week mindfulness-based interventions (MBIs) such as mindfulness-based stress reduction (MBSR) and mindfulness-based cognitive therapy (MBCT). We searched the PsychINFO, CINAHL, Web of Science, COCHRANE, and PubMed databases to identify original studies investigating the effects of MBI on cognition in older adults. Six reports were included in the review of which three were randomized controlled trials. Studies reported preliminary positive effects on memory, executive function and processing speed. However, most reports had a high risk of bias and sample sizes were small. The only study with low risk of bias, large sample size and active control group reported no significant findings. We conclude that eight-week MBI for older adults are feasible, but results on cognitive improvement are inconclusive due a limited number of studies, small sample sizes, and a high risk of bias. Rather than a narrow focus on cognitive training per se, future research may productively shift to investigate MBI as a tool to alleviate suffering in older adults, and to prevent cognitive problems in later life already in younger target populations.

Estimation of the emission factors of particle number and mass fractions from traffic at a site where mean vehicle speeds vary over short distances

NASA Astrophysics Data System (ADS)

Jones, Alan M.; Harrison, Roy M.

Emission factors for particle number in three size ranges (11-30; 30-100 and >100 nm) as well as for PM 2.5, PM 2.5-10 and PM 10 mass have been estimated separately for heavy and light-duty vehicles in a heavily trafficked street canyon in London where traffic speeds vary considerably over short distances. Emissions of NO x were estimated from published emission factors, and emissions of other pollutants estimated from their ratio to NO x in the roadside concentration after subtraction of the simultaneously measured urban background. The estimated emission factors are compared with other published data. Despite many differences in the design and implementation of the various studies, the results for particulate matter are broadly similar. Estimates of particle number emissions in this study for light-duty vehicles are very close to other published data, whilst those for heavy-duty vehicles are lower than in the more comparable studies. It is suggested that a contributory factor may be the introduction of diesel particle oxidation traps on some of the bus fleet in London. Estimates of emission factors for particle mass (PM 2.5 and PM 2.5-10) are within the range of other published data, and total mass emissions estimated from the ratio of concentration to NO x are tolerably close to those estimated using emission factors from the National Atmospheric Emissions Inventory (NAEI). However, the method leads to an estimate of carbon monoxide emissions 3-6 times larger than that derived using the NAEI factors.

Study design options in evaluating gene-environment interactions: practical considerations for a planned case-control study of pediatric leukemia.

PubMed

Goodman, Michael; Dana Flanders, W

2007-04-01

We compare methodological approaches for evaluating gene-environment interaction using a planned study of pediatric leukemia as a practical example. We considered three design options: a full case-control study (Option I), a case-only study (Option II), and a partial case-control study (Option III), in which information on controls is limited to environmental exposure only. For each design option we determined its ability to measure the main effects of environmental factor E and genetic factor G, and the interaction between E and G. Using the leukemia study example, we calculated sample sizes required to detect and odds ratio (OR) of 2.0 for E alone, an OR of 10 for G alone and an interaction G x E of 3. Option I allows measuring both main effects and interaction, but requires a total sample size of 1,500 cases and 1,500 controls. Option II allows measuring only interaction, but requires just 121 cases. Option III allows calculating the main effect of E, and interaction, but not the main effect of G, and requires a total of 156 cases and 133 controls. In this case, the partial case-control study (Option III) appears to be more efficient with respect to its ability to answer the research questions for the amount of resources required. The design options considered in this example are not limited to observational epidemiology and may be applicable in studies of pharmacogenomics, survivorship, and other areas of pediatric ALL research.

Light-dependent governance of cell shape dimensions in cyanobacteria.

PubMed

Montgomery, Beronda L

2015-01-01

The regulation of cellular dimension is important for the function and survival of cells. Cellular dimensions, such as size and shape, are regulated throughout the life cycle of bacteria and can be adapted in response to environmental changes to fine-tune cellular fitness. Cell size and shape are generally coordinated with cell growth and division. Cytoskeletal regulation of cell shape and cell wall biosynthesis and/or deposition occurs in a range of organisms. Photosynthetic organisms, such as cyanobacteria, particularly exhibit light-dependent regulation of morphogenes and generation of reactive oxygen species and other signals that can impact cellular dimensions. Environmental signals initiate adjustments of cellular dimensions, which may be vitally important for optimizing resource acquisition and utilization or for coupling the cellular dimensions with the regulation of subcellular organization to maintain optimal metabolism. Although the involvement of cytoskeletal components in the regulation of cell shape is widely accepted, the signaling factors that regulate cytoskeletal and other distinct components involved in cell shape control, particularly in response to changes in external light cues, remain to be fully elucidated. In this review, factors impacting the inter-coordination of growth and division, the relationship between the regulation of cellular dimensions and central carbon metabolism, and consideration of the effects of specific environment signals, primarily light, on cell dimensions in cyanobacteria will be discussed. Current knowledge about the molecular bases of the light-dependent regulation of cellular dimensions and cell shape in cyanobacteria will be highlighted.

In-situ High Temperature Phase Transformations in Ceramics

DTIC Science & Technology

2009-07-28

microscopy - SEM and transmission electron microscopy - TEM), have identified important microstructural considerations, such as the critical ...particularly with judicial design of the critical particle size and microstructure.12, 47, 48 Likewise, preliminary work indicates the possibility of high...toughening of fiber reinforced, fibrous monolithic or laminated ceramic matrix composites.49, 50 enstatite was above a 7 μm critical grain size

Robust Variance Estimation with Dependent Effect Sizes: Practical Considerations Including a Software Tutorial in Stata and SPSS

ERIC Educational Resources Information Center

Tanner-Smith, Emily E.; Tipton, Elizabeth

2014-01-01

Methodologists have recently proposed robust variance estimation as one way to handle dependent effect sizes in meta-analysis. Software macros for robust variance estimation in meta-analysis are currently available for Stata (StataCorp LP, College Station, TX, USA) and SPSS (IBM, Armonk, NY, USA), yet there is little guidance for authors regarding…

Limits of optical transmission measurements with application to particle sizing techniques.

PubMed

Swanson, N L; Billard, B D; Gennaro, T L

1999-09-20

Considerable confusion exists regarding the applicability limits of the Bouguer-Lambert-Beer law of optical transmission. We review the derivation of the law and discuss its application to the optical thickness of the light-scattering medium. We demonstrate the range of applicability by presenting a method for determining particle size by measuring optical transmission at two wavelengths.

High Energy Colliders

NASA Astrophysics Data System (ADS)

Palmer, R. B.; Gallardo, J. C.

INTRODUCTION PHYSICS CONSIDERATIONS GENERAL REQUIRED LUMINOSITY FOR LEPTON COLLIDERS THE EFFECTIVE PHYSICS ENERGIES OF HADRON COLLIDERS HADRON-HADRON MACHINES LUMINOSITY SIZE AND COST CIRCULAR e^{+}e^- MACHINES LUMINOSITY SIZE AND COST e^{+}e^- LINEAR COLLIDERS LUMINOSITY CONVENTIONAL RF SUPERCONDUCTING RF AT HIGHER ENERGIES γ - γ COLLIDERS μ ^{+} μ^- COLLIDERS ADVANTAGES AND DISADVANTAGES DESIGN STUDIES STATUS AND REQUIRED R AND D COMPARISION OF MACHINES CONCLUSIONS DISCUSSION

Genetic variation in tree structure and its relation to size in Douglas-fir: II. crown form, branch characters, and foliage characters.

Treesearch

J.B. St. Clair

1994-01-01

Genetic variation and covariation among traits of tree size and structure were assessed in an 18-year-old Douglas-fir (Pseudotsuga menziesii var. menziesii (Mirb.) Franco) genetic test in the Coast Range of Oregon. Considerable genetic variation was found for relative crown width; stem increment per crown projection area; leaf...

Modulation aware cluster size optimisation in wireless sensor networks

NASA Astrophysics Data System (ADS)

Sriram Naik, M.; Kumar, Vinay

2017-07-01

Wireless sensor networks (WSNs) play a great role because of their numerous advantages to the mankind. The main challenge with WSNs is the energy efficiency. In this paper, we have focused on the energy minimisation with the help of cluster size optimisation along with consideration of modulation effect when the nodes are not able to communicate using baseband communication technique. Cluster size optimisations is important technique to improve the performance of WSNs. It provides improvement in energy efficiency, network scalability, network lifetime and latency. We have proposed analytical expression for cluster size optimisation using traditional sensing model of nodes for square sensing field with consideration of modulation effects. Energy minimisation can be achieved by changing the modulation schemes such as BPSK, 16-QAM, QPSK, 64-QAM, etc., so we are considering the effect of different modulation techniques in the cluster formation. The nodes in the sensing fields are random and uniformly deployed. It is also observed that placement of base station at centre of scenario enables very less number of modulation schemes to work in energy efficient manner but when base station placed at the corner of the sensing field, it enable large number of modulation schemes to work in energy efficient manner.

NASA Super Pressure Balloon

NASA Technical Reports Server (NTRS)

Fairbrother, Debbie

2017-01-01

NASA is in the process of qualifying the mid-size Super Pressure Balloon (SPB) to provide constant density altitude flight for science investigations at polar and mid-latitudes. The status of the development of the 18.8 million cubic foot SPB capable of carrying one-tone of science to 110,000 feet, will be given. In addition, the operating considerations such as launch sites, flight safety considerations, and recovery will be discussed.

NASA Super Pressure Balloon

NASA Technical Reports Server (NTRS)

Fairbrother, Debbie

2016-01-01

NASA is in the process of qualifying the mid-size Super Pressure Balloon (SPB) to provide constant density altitude flight for science investigations at polar and mid-latitudes. The status of the development of the 18.8 million cubic foot SPB capable of carrying one-tonne of science to 110,000 feet, will be given. In addition, the operating considerations such as launch sites, flight safety considerations, and recovery will be discussed.

Comparative assessment of nanomaterial definitions and safety evaluation considerations.

PubMed

Boverhof, Darrell R; Bramante, Christina M; Butala, John H; Clancy, Shaun F; Lafranconi, Mark; West, Jay; Gordon, Steve C

2015-10-01

Nanomaterials continue to bring promising advances to science and technology. In concert have come calls for increased regulatory oversight to ensure their appropriate identification and evaluation, which has led to extensive discussions about nanomaterial definitions. Numerous nanomaterial definitions have been proposed by government, industry, and standards organizations. We conducted a comprehensive comparative assessment of existing nanomaterial definitions put forward by governments to highlight their similarities and differences. We found that the size limits used in different definitions were inconsistent, as were considerations of other elements, including agglomerates and aggregates, distributional thresholds, novel properties, and solubility. Other important differences included consideration of number size distributions versus weight distributions and natural versus intentionally-manufactured materials. Overall, the definitions we compared were not in alignment, which may lead to inconsistent identification and evaluation of nanomaterials and could have adverse impacts on commerce and public perceptions of nanotechnology. We recommend a set of considerations that future discussions of nanomaterial definitions should consider for describing materials and assessing their potential for health and environmental impacts using risk-based approaches within existing assessment frameworks. Our intent is to initiate a dialogue aimed at achieving greater clarity in identifying those nanomaterials that may require additional evaluation, not to propose a formal definition. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Practical, Ethical, and Legal Considerations regarding Videocounseling in College and University Counseling Centers: A Response to Quarto's "Influencing College Students' Perceptions of Videocounseling"

ERIC Educational Resources Information Center

Menzano, Silvestro; Goodwin, Alan; Rockett, Geraldine; Morris, Kathy

2011-01-01

There are numerous factors and concerns to take into consideration when implementing new technology into a counseling center's practice. These factors--informed consent, confidentiality, record-keeping, licensure, technical issues, eligibility, emergencies, and staff perceptions--are legitimate and must be addressed and resolved before…

Mate Choice and Domestic Life in the Nineteenth Century Marriage Manual

ERIC Educational Resources Information Center

Gordon, Michael; Berstein, M. Charles

1970-01-01

A considerable amount of diversity was discovered in the views expressed in the 63 books reviewed. Religious, physical, and social considerations were the factors most heavily stressed with regard to mate choce; romantic love was not an important factor. Sex is discussed almost solely in terms of its procreative function, although some change is…

Size Distribution of Sea-Salt Emissions as a Function of Relative Humidity

NASA Astrophysics Data System (ADS)

Zhang, K. M.; Knipping, E. M.; Wexler, A. S.; Bhave, P. V.; Tonnesen, G. S.

2004-12-01

Here we introduced a simple method for correcting sea-salt particle-size distributions as a function of relative humidity. Distinct from previous approaches, our derivation uses particle size at formation as the reference state rather than dry particle size. The correction factors, corresponding to the size at formation and the size at 80% RH, are given as polynomial functions of local relative humidity which are straightforward to implement. Without major compromises, the correction factors are thermodynamically accurate and can be applied between 0.45 and 0.99 RH. Since the thermodynamic properties of sea-salt electrolytes are weakly dependent on ambient temperature, these factors can be regarded as temperature independent. The correction factor w.r.t. to the size at 80% RH is in excellent agreement with those from Fitzgerald's and Gerber's growth equations; while the correction factor w.r.t. the size at formation has the advantage of being independent of dry size and relative humidity at formation. The resultant sea-salt emissions can be used directly in atmospheric model simulations at urban, regional and global scales without further correction. Application of this method to several common open-ocean and surf-zone sea-salt-particle source functions is described.

22 CFR 214.12 - Considerations in membership selection.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Considerations in membership selection. 214.12... Establishment of Advisory Committees § 214.12 Considerations in membership selection. Membership is to be fairly... also given to factors of sex, race, creed, national origin, and religion. ...

22 CFR 214.12 - Considerations in membership selection.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Considerations in membership selection. 214.12... Establishment of Advisory Committees § 214.12 Considerations in membership selection. Membership is to be fairly... also given to factors of sex, race, creed, national origin, and religion. ...

22 CFR 214.12 - Considerations in membership selection.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 22 Foreign Relations 1 2012-04-01 2012-04-01 false Considerations in membership selection. 214.12... Establishment of Advisory Committees § 214.12 Considerations in membership selection. Membership is to be fairly... also given to factors of sex, race, creed, national origin, and religion. ...

22 CFR 214.12 - Considerations in membership selection.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 1 2014-04-01 2014-04-01 false Considerations in membership selection. 214.12... Establishment of Advisory Committees § 214.12 Considerations in membership selection. Membership is to be fairly... also given to factors of sex, race, creed, national origin, and religion. ...

Automated size-specific CT dose monitoring program: assessing variability in CT dose.

PubMed

Christianson, Olav; Li, Xiang; Frush, Donald; Samei, Ehsan

2012-11-01

The potential health risks associated with low levels of ionizing radiation have created a movement in the radiology community to optimize computed tomography (CT) imaging protocols to use the lowest radiation dose possible without compromising the diagnostic usefulness of the images. Despite efforts to use appropriate and consistent radiation doses, studies suggest that a great deal of variability in radiation dose exists both within and between institutions for CT imaging. In this context, the authors have developed an automated size-specific radiation dose monitoring program for CT and used this program to assess variability in size-adjusted effective dose from CT imaging. The authors radiation dose monitoring program operates on an independent health insurance portability and accountability act compliant dosimetry server. Digital imaging and communication in medicine routing software is used to isolate dose report screen captures and scout images for all incoming CT studies. Effective dose conversion factors (k-factors) are determined based on the protocol and optical character recognition is used to extract the CT dose index and dose-length product. The patient's thickness is obtained by applying an adaptive thresholding algorithm to the scout images and is used to calculate the size-adjusted effective dose (ED(adj)). The radiation dose monitoring program was used to collect data on 6351 CT studies from three scanner models (GE Lightspeed Pro 16, GE Lightspeed VCT, and GE Definition CT750 HD) and two institutions over a one-month period and to analyze the variability in ED(adj) between scanner models and across institutions. No significant difference was found between computer measurements of patient thickness and observer measurements (p = 0.17), and the average difference between the two methods was less than 4%. Applying the size correction resulted in ED(adj) that differed by up to 44% from effective dose estimates that were not adjusted by patient size. Additionally, considerable differences were noted in ED(adj) distributions between scanners, with scanners employing iterative reconstruction exhibiting significantly lower ED(adj) (range: 9%-64%). Finally, a significant difference (up to 59%) in ED(adj) distributions was observed between institutions, indicating the potential for dose reduction. The authors developed a robust automated size-specific radiation dose monitoring program for CT. Using this program, significant differences in ED(adj) were observed between scanner models and across institutions. This new dose monitoring program offers a unique tool for improving quality assurance and standardization both within and across institutions.

Automated size-specific CT dose monitoring program: Assessing variability in CT dose

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christianson, Olav; Li Xiang; Frush, Donald

2012-11-15

Purpose: The potential health risks associated with low levels of ionizing radiation have created a movement in the radiology community to optimize computed tomography (CT) imaging protocols to use the lowest radiation dose possible without compromising the diagnostic usefulness of the images. Despite efforts to use appropriate and consistent radiation doses, studies suggest that a great deal of variability in radiation dose exists both within and between institutions for CT imaging. In this context, the authors have developed an automated size-specific radiation dose monitoring program for CT and used this program to assess variability in size-adjusted effective dose from CTmore » imaging. Methods: The authors radiation dose monitoring program operates on an independent health insurance portability and accountability act compliant dosimetry server. Digital imaging and communication in medicine routing software is used to isolate dose report screen captures and scout images for all incoming CT studies. Effective dose conversion factors (k-factors) are determined based on the protocol and optical character recognition is used to extract the CT dose index and dose-length product. The patient's thickness is obtained by applying an adaptive thresholding algorithm to the scout images and is used to calculate the size-adjusted effective dose (ED{sub adj}). The radiation dose monitoring program was used to collect data on 6351 CT studies from three scanner models (GE Lightspeed Pro 16, GE Lightspeed VCT, and GE Definition CT750 HD) and two institutions over a one-month period and to analyze the variability in ED{sub adj} between scanner models and across institutions. Results: No significant difference was found between computer measurements of patient thickness and observer measurements (p= 0.17), and the average difference between the two methods was less than 4%. Applying the size correction resulted in ED{sub adj} that differed by up to 44% from effective dose estimates that were not adjusted by patient size. Additionally, considerable differences were noted in ED{sub adj} distributions between scanners, with scanners employing iterative reconstruction exhibiting significantly lower ED{sub adj} (range: 9%-64%). Finally, a significant difference (up to 59%) in ED{sub adj} distributions was observed between institutions, indicating the potential for dose reduction. Conclusions: The authors developed a robust automated size-specific radiation dose monitoring program for CT. Using this program, significant differences in ED{sub adj} were observed between scanner models and across institutions. This new dose monitoring program offers a unique tool for improving quality assurance and standardization both within and across institutions.« less

Changes in the prevalence of vocal symptoms among teachers during a twelve-year period.

PubMed

Simberg, Susanna; Sala, Eeva; Vehmas, Kirsti; Laine, Anneli

2005-03-01

Vocal symptoms and voice disorders among teachers were studied in 1988 using a questionnaire designed to obtain information on six vocal symptoms that had appeared during the past 2 years. Twelve percent of the 478 respondents reported vocal symptoms occurring weekly or more often. The study was repeated using the same questionnaire in 2001. The results of this second study (n=241) indicate that vocal symptoms had increased considerably. Twenty-nine percent of the teachers reported symptoms occurring weekly or more often, and 20% reported two symptoms or more occurring at least once a week, which is significantly more than in 1988. Accordingly, voice disorders are probably a growing problem among teachers. Several factors may explain these increases. In 2001, the teachers complained more often about increases in the size of their classes. Factors that disturbed normal work routines, such as noisy or misbehaving pupils, had also increased significantly. A growing number of misbehaving pupils probably cause increased background noise and stress and, thus, increase the vocal symptoms in teachers.

The optimization of design parameters for surge relief valve for pipeline systems

NASA Astrophysics Data System (ADS)

Kim, Hyunjun; Hur, Jisung; Kim, Sanghyun

2017-06-01

Surge is an abnormal pressure which induced by rapid changes of flow rate in pipeline systems. In order to protect pipeline system from the surge pressure, various hydraulic devices have been developed. Surge-relief valve(SRV) is one of the widely applied devices to control surge due to its feasibility in application, efficiency and cost-effectiveness. SRV is designed to automatically open under abnormal pressure and discharge the flow and makes pressure of the system drop to the allowable level. The performance of the SRV is influenced by hydraulics. According to previous studies, there are several affecting factors which determine performance of the PRV such as design parameters (e.g. size of the valve), system parameters (e.g. number of the valves and location of the valve), and operation parameters (e.g. set point and operation time). Therefore, the systematic consideration for factors affecting performance of SRV is required for the proper installation of SRV in the system. In this study, methodology for finding optimum parameters of the SRV is explored through the integration of Genetic Algorithm(GA) into surge analysis.

Design and analysis issues in gene and environment studies

PubMed Central

2012-01-01

Both nurture (environmental) and nature (genetic factors) play an important role in human disease etiology. Traditionally, these effects have been thought of as independent. This perspective is ill informed for non-mendelian complex disorders which result as an interaction between genetics and environment. To understand health and disease we must study how nature and nurture interact. Recent advances in human genomics and high-throughput biotechnology make it possible to study large numbers of genetic markers and gene products simultaneously to explore their interactions with environment. The purpose of this review is to discuss design and analytic issues for gene-environment interaction studies in the “-omics” era, with a focus on environmental and genetic epidemiological studies. We present an expanded environmental genomic disease paradigm. We discuss several study design issues for gene-environmental interaction studies, including confounding and selection bias, measurement of exposures and genotypes. We discuss statistical issues in studying gene-environment interactions in different study designs, such as choices of statistical models, assumptions regarding biological factors, and power and sample size considerations, especially in genome-wide gene-environment studies. Future research directions are also discussed. PMID:23253229

Design and analysis issues in gene and environment studies.

PubMed

Liu, Chen-yu; Maity, Arnab; Lin, Xihong; Wright, Robert O; Christiani, David C

2012-12-19

Both nurture (environmental) and nature (genetic factors) play an important role in human disease etiology. Traditionally, these effects have been thought of as independent. This perspective is ill informed for non-mendelian complex disorders which result as an interaction between genetics and environment. To understand health and disease we must study how nature and nurture interact. Recent advances in human genomics and high-throughput biotechnology make it possible to study large numbers of genetic markers and gene products simultaneously to explore their interactions with environment. The purpose of this review is to discuss design and analytic issues for gene-environment interaction studies in the "-omics" era, with a focus on environmental and genetic epidemiological studies. We present an expanded environmental genomic disease paradigm. We discuss several study design issues for gene-environmental interaction studies, including confounding and selection bias, measurement of exposures and genotypes. We discuss statistical issues in studying gene-environment interactions in different study designs, such as choices of statistical models, assumptions regarding biological factors, and power and sample size considerations, especially in genome-wide gene-environment studies. Future research directions are also discussed.

Possible mechanisms for the cariostatic effect of xylitol.

PubMed

Mäkinen, K K

1976-01-01

Xylitol appears to be the only known cariostatic natural carbohydrate which meets most of the desiderata for a sweetener in the human diet. Possible mechanisms for this cariostatic action can be derived from a consideration of the factors which may be operating at a molecular and microbiological level. These include: a) Molecular size and e.g. the short, open-chain structure and absence of reducing groups b) Absence or relative lack in most oral microorganisms of xylitol-binding factors in dental plaque c) Lack of bacterial genes coding for xylitol-utilizing enzymes or of inducible or de-repressible genes for this purpose d) Inhibition of enzymes involved in cariogenesis (competitive in case of some isomerases) e) Enzyme specificity requirements f) Higher osmotic pressure exerted by xylitol as compared to hexoses and disaccharides g) Ability of xylitol to produce a favourable electrolyte concentration in the saliva without lowering plaque pH h) Ability of xylitol to increase the secretion and activity of salivary lactoperoxidase and certain other (muco) proteins. Xylitol may enhance the adsorption of glycoproteins on the tooth surfaces and strengthen the acquired pellicle.

Reliability considerations for the total strain range version of strainrange partitioning

NASA Technical Reports Server (NTRS)

Wirsching, P. H.; Wu, Y. T.

1984-01-01

A proposed total strainrange version of strainrange partitioning (SRP) to enhance the manner in which SRP is applied to life prediction is considered with emphasis on how advanced reliability technology can be applied to perform risk analysis and to derive safety check expressions. Uncertainties existing in the design factors associated with life prediction of a component which experiences the combined effects of creep and fatigue can be identified. Examples illustrate how reliability analyses of such a component can be performed when all design factors in the SRP model are random variables reflecting these uncertainties. The Rackwitz-Fiessler and Wu algorithms are used and estimates of the safety index and the probablity of failure are demonstrated for a SRP problem. Methods of analysis of creep-fatigue data with emphasis on procedures for producing synoptic statistics are presented. An attempt to demonstrate the importance of the contribution of the uncertainties associated with small sample sizes (fatique data) to risk estimates is discussed. The procedure for deriving a safety check expression for possible use in a design criteria document is presented.

ESL Placement and Schools

PubMed Central

Callahan, Rebecca; Wilkinson, Lindsey; Muller, Chandra; Frisco, Michelle

2010-01-01

In this study, the authors explore English as a Second Language (ESL) placement as a measure of how schools label and process immigrant students. Using propensity score matching and data from the Adolescent Health and Academic Achievement Study and the National Longitudinal Study of Adolescent Health, the authors estimate the effect of ESL placement on immigrant achievement. In schools with more immigrant students, the authors find that ESL placement results in higher levels of academic performance; in schools with few immigrant students, the effect reverses. This is not to suggest a one-size-fits-all policy; many immigrant students, regardless of school composition, generational status, or ESL placement, struggle to achieve at levels sufficient for acceptance to a 4-year university. This study offers several factors to be taken into consideration as schools develop policies and practices to provide immigrant students opportunities to learn. PMID:20617111

Longitudinal patterns of employment and postsecondary education for adults with autism and average-range IQ.

PubMed

Taylor, Julie Lounds; Henninger, Natalie A; Mailick, Marsha R

2015-10-01

This study examined correlates of participation in postsecondary education and employment over 12 years for 73 adults with autism spectrum disorders and average-range IQ whose families were part of a larger, longitudinal study. Correlates included demographic (sex, maternal education, paternal education), behavioral (activities of daily living, maladaptive behaviors, autism symptoms), and family (size of maternal social network; maternal depressive symptoms, anxiety, and pessimism) factors. Although two-thirds of adults with autism spectrum disorder participated in competitive employment/postsecondary education during the study, fewer than 25% maintained these activities over the study period. Behavioral characteristics distinguished those who never had competitive employment/postsecondary education from those who sometimes or consistently participated in these activities. Women were considerably less likely than men to maintain employment/postsecondary education over time. © The Author(s) 2015.

Integrating the human element into the systems engineering process and MBSE methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tadros, Michael Samir

In response to the challenges related to the increasing size and complexity of systems, organizations have recognized the need to integrate human considerations in the beginning stages of systems development. Human Systems Integration (HSI) seeks to accomplish this objective by incorporating human factors within systems engineering (SE) processes and methodologies, which is the focus of this paper. A representative set of HSI methods from multiple sources are organized, analyzed, and mapped to the systems engineering Vee-model. These methods are then consolidated and evaluated against the SE process and Models-Based Systems Engineering (MBSE) methodology to determine where and how they couldmore » integrate within systems development activities in the form of specific enhancements. Overall conclusions based on these evaluations are presented and future research areas are proposed.« less

Debris and shrapnel assessments for National Ignition Facility targets and diagnostics

NASA Astrophysics Data System (ADS)

Masters, N. D.; Fisher, A.; Kalantar, D.; Stölken, J.; Smith, C.; Vignes, R.; Burns, S.; Doeppner, T.; Kritcher, A.; Park, H.-S.

2016-05-01

High-energy laser experiments at the National Ignition Facility (NIF) can create debris and shrapnel capable of damaging laser optics and diagnostic instruments. The size, composition and location of target components and sacrificial shielding (e.g., disposable debris shields, or diagnostic filters) and the protection they provide is constrained by many factors, including: chamber and diagnostic geometries, experimental goals and material considerations. An assessment of the generation, nature and velocity of shrapnel and debris and their potential threats is necessary prior to fielding targets or diagnostics. These assessments may influence target and shielding design, filter configurations and diagnostic selection. This paper will outline the approach used to manage the debris and shrapnel risk associated with NIF targets and diagnostics and present some aspects of two such cases: the Material Strength Rayleigh- Taylor campaign and the Mono Angle Crystal Spectrometer (MACS).

Laser-induced damage of coatings on Yb:YAG crystals at cryogenic condition

NASA Astrophysics Data System (ADS)

Wang, He; Zhang, Weili; Chen, Shunli; Zhu, Meiping; He, Hongbo; Fan, Zhengxiu

2011-12-01

As large amounts of heat need to be dissipated during laser operation, some diode pumped solid state lasers (DPSSL), especially Yb:YAG laser, operate at cryogenic condition. This work investigated the laser induced damage of coatings (high-reflective and anti-reflective coatings) on Yb:YAG crystals at cryogenic temperature and room temperature. The results show that the damage threshold of coatings at cryogenic temperature is lower than the one at room temperature. Field-emission scanning electron microscopy (FESEM), optical profiler, step profiler and Atomic force microscope (AFM) were used to obtain the damage morphology, size and depth. Taking alteration of physical parameters, microstructure of coatings and the environmental pollution into consideration, we analyzed the key factor of lowering the coating damage threshold at cryogenic conditions. The results are important to understand the mechanisms leading to damage at cryogenic condition.

Ranking of Prokaryotic Genomes Based on Maximization of Sortedness of Gene Lengths

PubMed Central

Bolshoy, A; Salih, B; Cohen, I; Tatarinova, T

2014-01-01

How variations of gene lengths (some genes become longer than their predecessors, while other genes become shorter and the sizes of these factions are randomly different from organism to organism) depend on organismal evolution and adaptation is still an open question. We propose to rank the genomes according to lengths of their genes, and then find association between the genome rank and variousproperties, such as growth temperature, nucleotide composition, and pathogenicity. This approach reveals evolutionary driving factors. The main purpose of this study is to test effectiveness and robustness of several ranking methods. The selected method of evaluation is measuring of overall sortedness of the data. We have demonstrated that all considered methods give consistent results and Bubble Sort and Simulated Annealing achieve the highest sortedness. Also, Bubble Sort is considerably faster than the Simulated Annealing method. PMID:26146586

Ranking of Prokaryotic Genomes Based on Maximization of Sortedness of Gene Lengths.

PubMed

Bolshoy, A; Salih, B; Cohen, I; Tatarinova, T

How variations of gene lengths (some genes become longer than their predecessors, while other genes become shorter and the sizes of these factions are randomly different from organism to organism) depend on organismal evolution and adaptation is still an open question. We propose to rank the genomes according to lengths of their genes, and then find association between the genome rank and variousproperties, such as growth temperature, nucleotide composition, and pathogenicity. This approach reveals evolutionary driving factors. The main purpose of this study is to test effectiveness and robustness of several ranking methods. The selected method of evaluation is measuring of overall sortedness of the data. We have demonstrated that all considered methods give consistent results and Bubble Sort and Simulated Annealing achieve the highest sortedness. Also, Bubble Sort is considerably faster than the Simulated Annealing method.

Cryo-tomography Tilt-series Alignment with Consideration of the Beam-induced Sample Motion

PubMed Central

Fernandez, Jose-Jesus; Li, Sam; Bharat, Tanmay A. M.; Agard, David A.

2018-01-01

Recent evidence suggests that the beam-induced motion of the sample during tilt-series acquisition is a major resolution-limiting factor in electron cryo-tomography (cryoET). It causes suboptimal tilt-series alignment and thus deterioration of the reconstruction quality. Here we present a novel approach to tilt-series alignment and tomographic reconstruction that considers the beam-induced sample motion through the tilt-series. It extends the standard fiducial-based alignment approach in cryoET by introducing quadratic polynomials to model the sample motion. The model can be used during reconstruction to yield a motion-compensated tomogram. We evaluated our method on various datasets with different sample sizes. The results demonstrate that our method could be a useful tool to improve the quality of tomograms and the resolution in cryoET. PMID:29410148

Rapid Increase in Genome Size as a Consequence of Transposable Element Hyperactivity in Wood-White (Leptidea) Butterflies

PubMed Central

Talla, Venkat; Suh, Alexander; Kalsoom, Faheema; Dincă, Vlad; Vila, Roger; Friberg, Magne; Wiklund, Christer

2017-01-01

Abstract Characterizing and quantifying genome size variation among organisms and understanding if genome size evolves as a consequence of adaptive or stochastic processes have been long-standing goals in evolutionary biology. Here, we investigate genome size variation and association with transposable elements (TEs) across lepidopteran lineages using a novel genome assembly of the common wood-white (Leptidea sinapis) and population re-sequencing data from both L. sinapis and the closely related L. reali and L. juvernica together with 12 previously available lepidopteran genome assemblies. A phylogenetic analysis confirms established relationships among species, but identifies previously unknown intraspecific structure within Leptidea lineages. The genome assembly of L. sinapis is one of the largest of any lepidopteran taxon so far (643 Mb) and genome size is correlated with abundance of TEs, both in Lepidoptera in general and within Leptidea where L. juvernica from Kazakhstan has considerably larger genome size than any other Leptidea population. Specific TE subclasses have been active in different Lepidoptera lineages with a pronounced expansion of predominantly LINEs, DNA elements, and unclassified TEs in the Leptidea lineage after the split from other Pieridae. The rate of genome expansion in Leptidea in general has been in the range of four Mb/Million year (My), with an increase in a particular L. juvernica population to 72 Mb/My. The considerable differences in accumulation rates of specific TE classes in different lineages indicate that TE activity plays a major role in genome size evolution in butterflies and moths. PMID:28981642

Spatial Ecology of the Critically Endangered Fijian Crested Iguana, Brachylophus vitiensis, in an Extremely Dense Population: Implications for Conservation

PubMed Central

Morrison, Suzanne F.; Biciloa, Pita; Harlow, Peter S.; Keogh, J. Scott

2013-01-01

The Critically Endangered Fijian crested iguana, Brachylophus vitiensis, occurs at extreme density at only one location, with estimates of >10,000 iguanas living on the 70 hectare island of Yadua Taba in Fiji. We conducted a mark and recapture study over two wet seasons, investigating the spatial ecology and intraspecific interactions of the strictly arboreal Fijian crested iguana. This species exhibits moderate male-biased sexual size dimorphism, which has been linked in other lizard species to territoriality, aggression and larger male home ranges. We found that male Fijian crested iguanas exhibit high injury levels, indicative of frequent aggressive interactions. We did not find support for larger home range size in adult males relative to adult females, however male and female residents were larger than roaming individuals. Males with established home ranges also had larger femoral pores relative to body size than roaming males. Home range areas were small in comparison to those of other iguana species, and we speculate that the extreme population density impacts considerably on the spatial ecology of this population. There was extensive home range overlap within and between sexes. Intersexual overlap was greater than intrasexual overlap for both sexes, and continuing male-female pairings were observed among residents. Our results suggest that the extreme population density necessitates extensive home range overlap even though the underlying predictors of territoriality, such as male biased sexual size dimorphism and high aggression levels, remain. Our findings should be factored in to conservation management efforts for this species, particularly in captive breeding and translocation programs. PMID:24019902

Spatial ecology of the critically endangered Fijian crested iguana, Brachylophus vitiensis, in an extremely dense population: implications for conservation.

PubMed

Morrison, Suzanne F; Biciloa, Pita; Harlow, Peter S; Keogh, J Scott

2013-01-01

The Critically Endangered Fijian crested iguana, Brachylophus vitiensis, occurs at extreme density at only one location, with estimates of >10,000 iguanas living on the 70 hectare island of Yadua Taba in Fiji. We conducted a mark and recapture study over two wet seasons, investigating the spatial ecology and intraspecific interactions of the strictly arboreal Fijian crested iguana. This species exhibits moderate male-biased sexual size dimorphism, which has been linked in other lizard species to territoriality, aggression and larger male home ranges. We found that male Fijian crested iguanas exhibit high injury levels, indicative of frequent aggressive interactions. We did not find support for larger home range size in adult males relative to adult females, however male and female residents were larger than roaming individuals. Males with established home ranges also had larger femoral pores relative to body size than roaming males. Home range areas were small in comparison to those of other iguana species, and we speculate that the extreme population density impacts considerably on the spatial ecology of this population. There was extensive home range overlap within and between sexes. Intersexual overlap was greater than intrasexual overlap for both sexes, and continuing male-female pairings were observed among residents. Our results suggest that the extreme population density necessitates extensive home range overlap even though the underlying predictors of territoriality, such as male biased sexual size dimorphism and high aggression levels, remain. Our findings should be factored in to conservation management efforts for this species, particularly in captive breeding and translocation programs.

Quantification of Al2O3 nanoparticles in human cell lines applying inductively coupled plasma mass spectrometry (neb-ICP-MS, LA-ICP-MS) and flow cytometry-based methods

NASA Astrophysics Data System (ADS)

Böhme, Steffi; Stärk, Hans-Joachim; Meißner, Tobias; Springer, Armin; Reemtsma, Thorsten; Kühnel, Dana; Busch, Wibke

2014-09-01

In order to quantify and compare the uptake of aluminum oxide nanoparticles of three different sizes into two human cell lines (skin keratinocytes (HaCaT) and lung epithelial cells (A549)), three analytical methods were applied: digestion followed by nebulization inductively coupled plasma mass spectrometry (neb-ICP-MS), direct laser ablation ICP-MS (LA-ICP-MS), and flow cytometry. Light and electron microscopy revealed an accumulation and agglomeration of all particle types within the cell cytoplasm, whereas no particles were detected in the cell nuclei. The internalized Al2O3 particles exerted no toxicity in the two cell lines after 24 h of exposure. The smallest particles with a primary particle size ( x BET) of 14 nm (Alu1) showed the lowest sedimentation velocity within the cell culture media, but were calculated to have settled completely after 20 h. Alu2 ( x BET = 111 nm) and Alu3 ( x BET = 750 nm) were calculated to reach the cell surface after 7 h and 3 min, respectively. The internal concentrations determined with the different methods lay in a comparable range of 2-8 µg Al2O3/cm2 cell layer, indicating the suitability of all methods to quantify the nanoparticle uptake. Nevertheless, particle size limitations of analytical methods using optical devices were demonstrated for LA-ICP-MS and flow cytometry. Furthermore, the consideration and comparison of particle properties as parameters for particle internalization revealed the particle size and the exposure concentration as determining factors for particle uptake.

Placebo Response in Repetitive Transcranial Magnetic Stimulation Trials of Treatment of Auditory Hallucinations in Schizophrenia: A Meta-Analysis

PubMed Central

Dollfus, Sonia; Lecardeur, Laurent; Morello, Rémy; Etard, Olivier

2016-01-01

Several meta-analyses have assessed the response of patients with schizophrenia with auditory verbal hallucinations (AVH) to treatment with repetitive transcranial magnetic stimulation (rTMS); however, the placebo response has never been explored. Typically observed in a therapeutic trial, the placebo effect may have a major influence on the effectiveness of rTMS. The purpose of this meta-analysis is to evaluate the magnitude of the placebo effect observed in controlled studies of rTMS treatment of AVH, and to determine factors that can impact the magnitude of this placebo effect, such as study design considerations and the type of sham used. The study included twenty-one articles concerning 303 patients treated by sham rTMS. A meta-analytic method was applied to obtain a combined, weighted effect size, Hedges’s g. The mean weighted effect size of the placebo effect across these 21 studies was 0.29 (P < .001). Comparison of the parallel and crossover studies revealed distinct results for each study design; placebo has a significant effect size in the 13 parallel studies (g = 0.44, P < 10−4), but not in the 8 crossover studies (g = 0.06, P = .52). In meta-analysis of the 13 parallel studies, the 45° position coil showed the highest effect size. Our results demonstrate that placebo effect should be considered a major source of bias in the assessment of rTMS efficacy. These results fundamentally inform the design of further controlled studies, particularly with respect to studies of rTMS treatment in psychiatry. PMID:26089351

Micron-pore-sized metallic filter tube membranes for filtration of particulates and water purification.

PubMed

Phelps, T J; Palumbo, A V; Bischoff, B L; Miller, C J; Fagan, L A; McNeilly, M S; Judkins, R R

2008-07-01

Robust filtering techniques capable of efficiently removing particulates and biological agents from water or air suffer from plugging, poor rejuvenation, low permeance, and high backpressure. Operational characteristics of pressure-driven separations are in part controlled by the membrane pore size, charge of particulates, transmembrane pressure and the requirement for sufficient water flux to overcome fouling. With long term use filters decline in permeance due to filter-cake plugging of pores, fouling, or filter deterioration. Though metallic filter tube development at ORNL has focused almost exclusively on gas separations, a small study examined the applicability of these membranes for tangential filtering of aqueous suspensions of bacterial-sized particles. A mixture of fluorescent polystyrene microspheres ranging in size from 0.5 to 6 microm in diameter simulated microorganisms in filtration studies. Compared to a commercial filter, the ORNL 0.6 microm filter averaged approximately 10-fold greater filtration efficiency of the small particles, several-fold greater permeance after considerable use and it returned to approximately 85% of the initial flow upon backflushing versus 30% for the commercial filter. After filtering several liters of the particle-containing suspension, the ORNL composite filter still exhibited greater than 50% of its initial permeance while the commercial filter had decreased to less than 20%. When considering a greater filtration efficiency, greater permeance per unit mass, greater percentage of rejuvenation upon backflushing (up to 3-fold), and likely greater performance with extended use, the ORNL 0.6 microm filters can potentially outperform the commercial filter by factors of 100-1,000 fold.

Influence of Plio-Pleistocene basin hydrology on the Turkana hominin enamel carbonate δ(18)O values.

PubMed

Quinn, Rhonda L

2015-09-01

Stable oxygen isotopes of hominin enamel carbonate (δ(18)OEC) provide a window into aspects of past drinking behavior and diet, body size, breastfeeding and weaning, mobility, and paleoclimate. It is tempting to compare all hominins across time and space in order to gauge species-level adaptations to changing environments and niche separation between those living sympatrically. Basinal, sub-basinal, and micro-environmental differences, however, may exert an influence on variation in enamel carbonate isotopic values that must be reconciled before hominin species across Africa can be meaningfully compared. Plio-Pleistocene Turkana hominin δ(18)OEC values show a considerable spread, potentially revealing many intrinsic and extrinsic contributing factors operating on different scales. In this study, I examine Turkana hominin δ(18)OEC values relative to identity (taxon, tooth type and number, body size of taxon), dietary (δ(13)C value, Turkana coeval and modern mammalian δ(18)OEC values), and contextual (time, depositional environment) information of each specimen and collection locality and discuss various potential influences. Turkana hominin δ(18)OEC values may primarily reflect differences in imbibed water sources (lake vs. river) as a function of evolving basin hydrology. Copyright © 2015 Elsevier Ltd. All rights reserved.

Sex change and effective population size: implications for population genetic studies in marine fish.

PubMed

Coscia, I; Chopelet, J; Waples, R S; Mann, B Q; Mariani, S

2016-10-01

Large variance in reproductive success is the primary factor that reduces effective population size (Ne) in natural populations. In sequentially hermaphroditic (sex-changing) fish, the sex ratio is typically skewed and biased towards the 'first' sex, while reproductive success increases considerably after sex change. Therefore, sex-changing fish populations are theoretically expected to have lower Ne than gonochorists (separate sexes), assuming all other parameters are essentially equal. In this study, we estimate Ne from genetic data collected from two ecologically similar species living along the eastern coast of South Africa: one gonochoristic, the 'santer' sea bream Cheimerius nufar, and one protogynous (female-first) sex changer, the 'slinger' sea bream Chrysoblephus puniceus. For both species, no evidence of genetic structuring, nor significant variation in genetic diversity, was found in the study area. Estimates of contemporary Ne were significantly lower in the protogynous species, but the same pattern was not apparent over historical timescales. Overall, our results show that sequential hermaphroditism may affect Ne differently over varying time frames, and that demographic signatures inferred from genetic markers with different inheritance modes also need to be interpreted cautiously, in relation to sex-changing life histories.

Impairments of colour vision induced by organic solvents: a meta-analysis study.

PubMed

Paramei, Galina V; Meyer-Baron, Monika; Seeber, Andreas

2004-09-01

The impairment of colour discrimination induced by occupational exposure to toluene, styrene and mixtures of organic solvents is reviewed and analysed using a meta-analytical approach. Thirty-nine studies were surveyed covering a wide range of exposure conditions. Those studies using the Lanthony Panel D-15 desaturated test (D-15d) were further considered. From these for 15 samples data on colour discrimination ability (Colour Confusion Index, CCI) and exposure levels were provided, required for the meta-analysis. In accordance with previously reported higher CCI values for the exposed groups, the computations yielded positive effect sizes for 13 of the 15 samples, indicating that in the great majority of the studies the exposed groups showed inferior colour discrimination. However, the meta-analysis showed great variation in effect sizes across the studies. Possible reasons for inconsistency among the reported findings are discussed. These pertain to exposure-related parameters, as well as to confounders such as conditions of test administration and characteristics of subject samples. Those factors vary considerably among the studies and might have greatly contributed to divergence in measured colour vision capacity, thereby obscuring consistent effects of organic solvents on colour discrimination.

Genetics of wellbeing and its components satisfaction with life, happiness, and quality of life: a review and meta-analysis of heritability studies.

PubMed

Bartels, Meike

2015-03-01

Wellbeing is a major topic of research across several disciplines, reflecting the increasing recognition of its strong value across major domains in life. Previous twin-family studies have revealed that individual differences in wellbeing are accounted for by both genetic as well as environmental factors. A systematic literature search identified 30 twin-family studies on wellbeing or a related measure such as satisfaction with life or happiness. Review of these studies showed considerable variation in heritability estimates (ranging from 0 to 64 %), which makes it difficult to draw firm conclusions regarding the genetic influences on wellbeing. For overall wellbeing twelve heritability estimates, from 10 independent studies, were meta-analyzed by computing a sample size weighted average heritability. Ten heritability estimates, derived from 9 independent samples, were used for the meta-analysis of satisfaction with life. The weighted average heritability of wellbeing, based on a sample size of 55,974 individuals, was 36 % (34-38), while the weighted average heritability for satisfaction with life was 32 % (29-35) (n = 47,750). With this result a more robust estimate of the relative influence of genetic effects on wellbeing is provided.

A critical look at national monitoring programs for birds and other wildlife species

USGS Publications Warehouse

Sauer, J.R.; O'Shea, T.J.; Bogon, M.A.

2003-01-01

Concerns?about declines in numerous taxa have created agreat deal of interest in survey development. Because birds have traditionally been monitored by a variety of methods, bird surveys form natural models for development of surveys for other taxa. Here I suggest that most bird surveys are not appropriate models for survey design. Most lack important design components associated with estimation of population parameters at sample sites or with sampling over space, leading to estimates that may be biased, I discuss the limitations of national bird monitoring programs designed to monitor population size. Although these surveys are often analyzed, careful consideration must be given to factors that may bias estimates but that cannot be evaluated within the survey. Bird surveys with appropriate designs have generally been developed as part of management programs that have specific information needs. Experiences gained from bird surveys provide important information for development of surveys for other taxa, and statistical developments in estimation of population sizes from counts provide new approaches to overcoming the limitations evident in many bird surveys. Design of surveys is a collaborative effort, requiring input from biologists, statisticians, and the managers who will use the information from the surveys.

hERG blocking potential of acids and zwitterions characterized by three thresholds for acidity, size and reactivity.

PubMed

Nikolov, Nikolai G; Dybdahl, Marianne; Jónsdóttir, Svava Ó; Wedebye, Eva B

2014-11-01

Ionization is a key factor in hERG K(+) channel blocking, and acids and zwitterions are known to be less probable hERG blockers than bases and neutral compounds. However, a considerable number of acidic compounds block hERG, and the physico-chemical attributes which discriminate acidic blockers from acidic non-blockers have not been fully elucidated. We propose a rule for prediction of hERG blocking by acids and zwitterionic ampholytes based on thresholds for only three descriptors related to acidity, size and reactivity. The training set of 153 acids and zwitterionic ampholytes was predicted with a concordance of 91% by a decision tree based on the rule. Two external validations were performed with sets of 35 and 48 observations, respectively, both showing concordances of 91%. In addition, a global QSAR model of hERG blocking was constructed based on a large diverse training set of 1374 chemicals covering all ionization classes, externally validated showing high predictivity and compared to the decision tree. The decision tree was found to be superior for the acids and zwitterionic ampholytes classes. Copyright © 2014 Elsevier Ltd. All rights reserved.

Conducting Creativity Brainstorming Sessions in Small and Medium-Sized Enterprises Using Computer-Mediated Communication Tools

NASA Astrophysics Data System (ADS)

Murthy, Uday S.

A variety of Web-based low cost computer-mediated communication (CMC) tools are now available for use by small and medium-sized enterprises (SME). These tools invariably incorporate chat systems that facilitate simultaneous input in synchronous electronic meeting environments, allowing what is referred to as “electronic brainstorming.” Although prior research in information systems (IS) has established that electronic brainstorming can be superior to face-to-face brainstorming, there is a lack of detailed guidance regarding how CMC tools should be optimally configured to foster creativity in SMEs. This paper discusses factors to be considered in using CMC tools for creativity brainstorming and proposes recommendations for optimally configuring CMC tools to enhance creativity in SMEs. The recommendations are based on lessons learned from several recent experimental studies on the use of CMC tools for rich brainstorming tasks that require participants to invoke domain-specific knowledge. Based on a consideration of the advantages and disadvantages of the various configuration options, the recommendations provided can form the basis for selecting a CMC tool for creativity brainstorming or for creating an in-house CMC tool for the purpose.

Empirical evaluation of predator-driven diel vertical migration in Lake Superior

USGS Publications Warehouse

Stockwell, J.D.; Hrabik, T.R.; Jensen, O.P.; Yule, D.L.; Balge, M.

2010-01-01

Recent studies on Lake Superior suggest that diel vertical migration (DVM) of prey (generalized Coregonus spp.) may be influenced by the density of predatory siscowet (Salvelinus namaycush). We empirically evaluated this hypothesis using data from acoustic, midwater trawl, and bottom trawl sampling at eight Lake Superior sites during three seasons in 2005 and a subset of sites in 2006. We expected the larger-bodied cisco (Coregonus artedi) to exhibit a shallower DVM compared with the smaller-bodied kiyi (Coregonus kiyi). Although DVM of kiyi and cisco were consistent with expectations of DVM as a size-dependent, predator-mediated process, we found no relationship between siscowet density and the magnitude of DVM of either coregonid. Cisco appear to have a size refuge from siscowet predation. Kiyi and siscowet co-occur in demersal habitat > 150 m during the day, where visual predation is unlikely, suggesting predator avoidance is not a factor in the daytime distribution of kiyi. Seasonal patterns of kiyi DVM were consistent with reported DVM of their primary prey Mysis relicta. Our results suggest that consideration of nonvisual foraging, rather than lightbased foraging theory (i.e., the antipredation window), is necessary to understand the processes driving DVM in deepwater systems.

Sexual attitudes, preferences and infections in Ancient Greece: has antiquity anything useful for us today?

PubMed Central

Morton, R S

1991-01-01

Modern society bears a heavy burden of medico-social pathology particularly amongst its young. The size, nature and costs of the sexually transmitted disease element is now considerable and dwarfs such successes as have been achieved. In the belief that the structure of a society and the way that structure functions determines the size of its STD problem, a review of Ancient Greek society has been undertaken. Greek society, not least concerning all aspects of sex, was well ordered, frank and tolerant. Some of the areas of Greek society's structure and functioning which differ most markedly from ours, and seem to have determined a modest STD problem, are highlighted and discussed. Greek ideas that might be adapted to match today's needs are presented for consideration. PMID:1916781

Large-volume protein crystal growth for neutron macromolecular crystallography.

PubMed

Ng, Joseph D; Baird, James K; Coates, Leighton; Garcia-Ruiz, Juan M; Hodge, Teresa A; Huang, Sijay

2015-04-01

Neutron macromolecular crystallography (NMC) is the prevailing method for the accurate determination of the positions of H atoms in macromolecules. As neutron sources are becoming more available to general users, finding means to optimize the growth of protein crystals to sizes suitable for NMC is extremely important. Historically, much has been learned about growing crystals for X-ray diffraction. However, owing to new-generation synchrotron X-ray facilities and sensitive detectors, protein crystal sizes as small as in the nano-range have become adequate for structure determination, lessening the necessity to grow large crystals. Here, some of the approaches, techniques and considerations for the growth of crystals to significant dimensions that are now relevant to NMC are revisited. These include experimental strategies utilizing solubility diagrams, ripening effects, classical crystallization techniques, microgravity and theoretical considerations.

A constant radius of curvature model for the organization of DNA in toroidal condensates.

PubMed Central

Hud, N V; Downing, K H; Balhorn, R

1995-01-01

Toroidal DNA condensates have received considerable attention for their possible relationship to the packaging of DNA in viruses and in general as a model of ordered DNA condensation. A spool-like model has primarily been supported for DNA organization within toroids. However, our observations suggest that the actual organization may be considerably different. We present an alternate model in which DNA for a given toroid is organized within a series of equally sized contiguous loops that precess about the toroid axis. A related model for the toroid formation process is also presented. This kinetic model predicts a distribution of toroid sizes for DNA condensed from solution that is in good agreement with experimental data. Images Fig. 1 Fig. 2 Fig. 3 Fig. 5 PMID:7724602

10 CFR 51.103 - Record of decision-general.

Code of Federal Regulations, 2010 CFR

2010-01-01

... preferences among alternatives based on relevant factors, including economic and technical considerations where appropriate, the NRC's statutory mission, and any essential considerations of national policy...

Analysis of various factors affecting pupil size in patients with glaucoma.

PubMed

Park, Ji Woong; Kang, Bong Hui; Kwon, Ji Won; Cho, Kyong Jin

2017-09-16

Pupil size is an important factor in predicting post-operative satisfaction. We assessed the correlation between pupil size, measured by Humphrey static perimetry, and various affecting factors in patients with glaucoma. In total, 825 eyes of 415 patients were evaluated retrospectively. Pupil size was measured with Humphrey static perimetry. Comparisons of pupil size according to the presence of glaucoma were evaluated, as were correlations between pupil size and various factors, including age, logMAR best corrected visual acuity (BCVA), retinal nerve fiber layer (RNFL) thickness, spherical equivalent, intraocular pressure, axial length, central corneal thickness, white-to-white, and the kappa angle. Pupil size was significantly smaller in glaucoma patients than in glaucoma suspects (p < 0.001) or the normal group (p < 0.001). Pupil size decreased significantly as age (p < 0.001) and central cornea thickness (p = 0.007) increased, and increased significantly as logMAR BCVA (p = 0.02) became worse and spherical equivalent (p = 0.007) and RNFL thickness (p = 0.042) increased. In patients older than 50 years, pupil size was significantly larger in eyes with a history of cataract surgery. Humphrey static perimetry can be useful in measuring pupil size. Pupil size was significantly smaller in eyes with glaucoma. Other factors affecting pupil size can be used in a preoperative evaluation when considering cataract surgery or laser refractive surgery.

SU-E-T-586: Field Size Dependence of Output Factor for Uniform Scanning Proton Beams: A Comparison of TPS Calculation, Measurement and Monte Carlo Simulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Y; Singh, H; Islam, M

2014-06-01

Purpose: Output dependence on field size for uniform scanning beams, and the accuracy of treatment planning system (TPS) calculation are not well studied. The purpose of this work is to investigate the dependence of output on field size for uniform scanning beams and compare it among TPS calculation, measurements and Monte Carlo simulations. Methods: Field size dependence was studied using various field sizes between 2.5 cm diameter to 10 cm diameter. The field size factor was studied for a number of proton range and modulation combinations based on output at the center of spread out Bragg peak normalized to amore » 10 cm diameter field. Three methods were used and compared in this study: 1) TPS calculation, 2) ionization chamber measurement, and 3) Monte Carlos simulation. The XiO TPS (Electa, St. Louis) was used to calculate the output factor using a pencil beam algorithm; a pinpoint ionization chamber was used for measurements; and the Fluka code was used for Monte Carlo simulations. Results: The field size factor varied with proton beam parameters, such as range, modulation, and calibration depth, and could decrease over 10% from a 10 cm to 3 cm diameter field for a large range proton beam. The XiO TPS predicted the field size factor relatively well at large field size, but could differ from measurements by 5% or more for small field and large range beams. Monte Carlo simulations predicted the field size factor within 1.5% of measurements. Conclusion: Output factor can vary largely with field size, and needs to be accounted for accurate proton beam delivery. This is especially important for small field beams such as in stereotactic proton therapy, where the field size dependence is large and TPS calculation is inaccurate. Measurements or Monte Carlo simulations are recommended for output determination for such cases.« less