29 CFR 570.67 - Occupations in roofing operations and on or about a roof (Order 16).

Code of Federal Regulations, 2013 CFR

2013-07-01

... pitch, asphalt prepared paper, tile, composite roofing materials, slate, metal, translucent materials, and shingles of asbestos, asphalt, wood or other materials) to roofs of buildings or other structures...

29 CFR 570.67 - Occupations in roofing operations and on or about a roof (Order 16).

Code of Federal Regulations, 2012 CFR

2012-07-01

... pitch, asphalt prepared paper, tile, composite roofing materials, slate, metal, translucent materials, and shingles of asbestos, asphalt, wood or other materials) to roofs of buildings or other structures...

Scalable and Tunable Carbide-Phosphide Composite Catalyst System for the Thermochemical Conversion of Biomass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Regmi, Yagya; Rogers, Bridget; Labbe, Nicole

We have prepared composite materials of hexagonal nickel phosphide and molybdenum carbide (Mo2C) utilizing a simple and scalable two-stage synthesis method comprised of carbothermic reduction followed by hydrothermal incubation. We observe the monophasic hexagonal phosphide Ni2P in the composite at low phosphide-to-carbide (P:C) ratios. Upon increasing the proportion of P:C, the carbide surface becomes saturated, and we detect the emergence of a second hexagonal nickel phosphide phase (Ni5P4) upon annealing. We demonstrate that vapor-phase upgrading (VPU) of whole biomass via catalytic fast pyrolysis is achievable using the composite material as a catalyst, and we monitor the resulting product slates usingmore » pyrolysis gas chromatography/mass spectrometry. Our analysis of the product vapors indicates that variation of the P:C molar ratio in the composite material affords product slates of varying complexity and composition, which is indicated by the number of products and their relative proportions in the product slate. Our results demonstrate that targeted vapor product composition can be obtained, which can potentially be utilized to tune the composition of the bio-oil downstream.« less

Scalable and Tunable Carbide-Phosphide Composite Catalyst System for the Thermochemical Conversion of Biomass

DOE PAGES

Regmi, Yagya; Rogers, Bridget; Labbe, Nicole; ...

2017-07-13

We have prepared composite materials of hexagonal nickel phosphide and molybdenum carbide (Mo2C) utilizing a simple and scalable two-stage synthesis method comprised of carbothermic reduction followed by hydrothermal incubation. We observe the monophasic hexagonal phosphide Ni2P in the composite at low phosphide-to-carbide (P:C) ratios. Upon increasing the proportion of P:C, the carbide surface becomes saturated, and we detect the emergence of a second hexagonal nickel phosphide phase (Ni5P4) upon annealing. We demonstrate that vapor-phase upgrading (VPU) of whole biomass via catalytic fast pyrolysis is achievable using the composite material as a catalyst, and we monitor the resulting product slates usingmore » pyrolysis gas chromatography/mass spectrometry. Our analysis of the product vapors indicates that variation of the P:C molar ratio in the composite material affords product slates of varying complexity and composition, which is indicated by the number of products and their relative proportions in the product slate. Our results demonstrate that targeted vapor product composition can be obtained, which can potentially be utilized to tune the composition of the bio-oil downstream.« less

Hydrothermal Detoxization of Slate Containing Asbestos and the Possibility of Application for Fertilizer of its Products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myojin, Sachi; Yamasaki, Chizuko; Yamasaki, Nakamichi

Hydrothermal decomposition of slate (building materials) containing asbestos has been attempted by using a NH{sub 4}H{sub 2}PO{sub 4} solution. Firstly, the alteration of chrysotile as a starting material was investigated under hydrothermal conditions of 200 deg. C, 12 hrs of reaction time and with a phosphate solution. It was confirmed that the original fibrous form of chrysotile had been perfectly collapsed by the SEM observation. The chrysotile (asbestos) disappeared to form Mg-Ca-Silicate (Ca{sub 7}Mg{sub 2}P{sub 6}O{sup 24}) estimated by XRD. The composition and chemical form of reaction products (Mg-Ca-Silicate) was predicted to application as a fertilizer. Fertilizer effect of thesemore » resulted product on cultivations of Japanese radish (leaves), soybeans and tomatoes, was examined by using a special medium of mixed soil with a low content of N, P, K and a thermal-treated zeolite one. The fertilizer effects of the product were compared to commercial fertilizers such as N, N-K-P and P types. In order to estimate the fertilizer effect, the size of crops, number of fruits and number of leaves were measured everyday. As a result, these hydrothermal products of slate containing asbestos were as good as commercial fertilizers on the market. Fruits groups especially had a good crop using the hydrothermal slate product. These results show that the main components of hydrothermal treatments slate are calcium silicate and magnesium phosphate. Its decomposition reaction products may have the possibility of application for fertilization of crops which require nucleic acid--phosphorus.« less

Materials samples face rigors of space.

PubMed

Flinn, Edward D

2002-07-01

The Materials International Space Station Experiment (MISSE) is described. This project is designed to conduct long duration materials tests on samples attached to the ISS. A batch of 750 material samples were delivered on STS-105 and attached to the ISS airlock. They will be exposed to the space environment for 18 months and are slated to return on STS-114. A second batch of 750 samples is being prepared. The experiment containers were used originally for the Mir Environmental Effects Payload, which tested a variety of substances, including some slated for use on the ISS. Researchers are particularly interested in the effects of atomic oxygen on the samples. Some samples are being tested to determine their use in radiation protection. As part of the MISSE project, ultrathin tether materials are being tested for use on the Propulsive Small Expendable Depoloyer System (ProSEDS), which will use a tether system to change a satellite's orbital altitude.

75 FR 81966 - Top of the Stove Stainless Steel Cooking Ware From the Republic of Korea: Final Results of Sunset...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

... Stainless Steel Cooking Ware From the Republic of Korea: Final Results of Sunset Reviews and Revocation of... reviews of the antidumping and countervailing duty orders on top of the stove stainless steel cooking ware... the stove stainless steel cooking ware from Korea includes all non-electric cooking ware of stainless...

76 FR 2708 - Porcelain-on-Steel Cooking Ware From Taiwan; Top-of-the-Stove Stainless Steel Cooking Ware From...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-14

.... 701- TA-267 and 731-TA-304 (Third Review)] Porcelain-on-Steel Cooking Ware From Taiwan; Top-of-the-Stove Stainless Steel Cooking Ware From Korea AGENCY: United States International Trade Commission...-steel cooking ware from Taiwan and the antidumping and countervailing duty orders on imports of top-of...

76 FR 2920 - Porcelain-on-Steel Cooking Ware From China

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-18

... Cooking Ware From China AGENCY: United States International Trade Commission. ACTION: Scheduling of an expedited five-year review concerning the antidumping duty order on porcelain-on-steel cooking ware from... revocation of the antidumping duty order on porcelain-on-steel cooking ware from China would be likely to...

75 FR 81967 - Porcelain-on-Steel Cooking Ware From Taiwan: Final Results of Sunset Review and Revocation of...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

... DEPARTMENT OF COMMERCE International Trade Administration [A-583-508] Porcelain-on-Steel Cooking... duty order on porcelain-on-steel cooking ware (POS cooking ware) from Taiwan pursuant to section 751(c... the antidumping duty order on POS cooking ware from Taiwan. DATES: Effective Date: November 22, 2010...

The Unwalled Garden: Growth of the OpenCourseWare Consortium, 2001-2008

ERIC Educational Resources Information Center

Carson, Steve

2009-01-01

This article traces the development of the OpenCourseWare movement, including the origin of the concept at the Massachusetts Institute of Technology (MIT), the implementation of the MIT OpenCourseWare project, and the idea's spread into the global educational community, ultimately resulting in the formation of the OpenCourseWare Consortium. The…

Petrographic analysis of prehistoric ceramics from the Huagangshan site of Hualien City, eastern Taiwan

NASA Astrophysics Data System (ADS)

Liou, Y. S.; Yi-Chang, L.

2017-12-01

Numerous stone artifacts, ceramics, bone tools, metal objects, and etc., had been unearthed from the Huagangshan site of Hualien City, eastern Taiwan, during the excavations of 2008-2010 and 2012. Of particular importance is more than ten thousands of potsherds were discovered. A stratigraphic sequence spanning the late Early Neolithic (ca. 5000 BP) through to the prehistoric of Taiwan (300 BP) was excavated. This study focuses on potteries from the Late Neolithic (ca. 3500-2800 BP), owing to some ceramics exhibiting distinct stylistic motifs and morphological attributes were recognized to be not produced locally. Have these wares been brought to the area by exchange trade and/or by immigrants? Or had they been made by local potters through the imitation of exotic styles? It is still unclear and is one of the most important archaeological issues in eastern Taiwan. To clarify this subject, understanding the raw material compositions and sources, manufacturing techniques, and etc. are considered to be the best ways. Thus, 21 potsherds from excavations and 6 river sand samples near the site were studied by petrographic analysis. The results of petrographic study show that temper components in the potsherds are quartz, pyroxene, amphibole, plagioclase, sedimentary rock fragments (sandstone), igneous rock fragments (andesite), and metamorphic rock fragments (metasandstone, slate, schist), and the contents and proportions are different in these samples. Petrography shows that the ceramic have multiple origins. A ternary plot of rock fragments shows three compositional groups. This result discriminates two types of ceramics from the others and confirms those ceramics producing non-locally. However, one type of potsherds have local origins through they were recognized to be exotic ones.

Effect of Iron Oxide and Phase Separation on the Color of Blue Jun Ware Glaze.

PubMed

Wang, Fen; Yang, Changan; Zhu, Jianfeng; Lin, Ying

2015-09-01

Based on the traditional Jun ware glaze, the imitated Jun ware glazes were prepared by adding iron oxide and introducing phase separation agent apatite through four-angle-method. The effect of iron oxide contents, phase separation and the firing temperature on the color of Jun ware glazes were investigated by a neutral atmosphere experiment, optical microscope and scanning electronic microscope. The results showed that the colorant, mainly Fe2O3, contributed to the Jun ware glaze blue and cyan colors of Jun ware glaze. The light scatter caused by the small droplets in phase separation structure only influenced the shade of the glaze color, intensify or weaken the color, and thus made the glaze perfect and elegant opal visual effects, but was not the origin of general blue or cyan colors of Jun ware glaze. In addition, the firing temperature and the basic glaze composition affected the glaze colors to some extent.

Educational Aids for Visually Handicapped.

ERIC Educational Resources Information Center

American Printing House for the Blind, Louisville, KY.

Listings specifying source and cost are provided of tactile aids and materials designed for the visually handicapped. Items are presented in the following categories: supply sources and catalogs for aids; braille devices, including duplicators, reading and writing aids, reading readiness materials, and writing machines, slates, and styluses; deaf…

Characteristic roofing slates from Spain: Mormeau and Los Molinos

NASA Astrophysics Data System (ADS)

Cardenes Van den Eynde, Victor; Cnudde, Veerle; Cnudde, Jean Pierre

2014-05-01

Characteristic roofing slates from Spain: Mormeau and Los Molinos Cardenes1, V., Cnudde1, V., Cnudde1, J.P. 1 Department of Geology and Soil Science, Ghent University, Krijgslaan 281, S8, 9000 Ghent, Belgium. The world's major roofing slate outcrops are found in the NW of Spain, in the Ordovician terrains of the domain of the Truchas Syncline. In this remote area, slate was quarried since ancient times for the use of the inhabitants of the region. Half of a century ago, an industrialization process took place in this area, which began to produce high quality roofing slate for many buildings from Japan to the USA, and especially in Europe. Since then, Spanish slate roofing has been widely used for new buildings and also for restoration of historical buildings. This work revises the occurrence and characteristics of the two most representative grey slate varieties from the Truchas Syncline, Mormeau, a fine-grained slate, and Los Molinos, also a grey slate with a slightly coarser grain. Both slates have a very similar aspect, but Mormeau slate have some iron sulphides on its composition that sometimes forms oxidation spots. Mormeau beds are found at the Middle-Upper Ordovician age Casaio Formation, while Los Molinos beds are located at the Rozadais Formation, of age Upper Ordovician, defined as formation just for the Truchas Syncline domain. Both slates have a high degree of homogeneity on their constructive characteristics, with a typical composition of quartz, mica and chlorites, and a metamorphic degree corresponding to the green schists facies. This work revises the history and characteristics of both slates, that can be considered as lithotypes that can be used as a reference during the prospection of new slate outcrops worldwide. The presented varieties of slate are proposed for their inclusion as Global Heritage Stones.

A pyritized lepidocoleid machaeridian (Annelida) from the Lower Devonian Hunsrück Slate, Germany

PubMed Central

Högström, Anette E.S.; Briggs, Derek E.G.; Bartels, Christoph

2009-01-01

A machaeridian, Lepidocoleus hohensteini sp. nov., is described from the Hunsrück Slate (Lower Emsian) of Germany. The available material includes a unique example preserving evidence of the soft tissues, only the second machaeridian specimen to do so and the first lepidocoleid. This specimen shows that the plates are attached to alternate segments in the trunk. The morphology is consistent with an annelid affinity of the Lepidocoleidae and confirms the unity of the Machaeridia. This discovery adds an important group to the known diversity of this famous late Palaeozoic marine Konservat-Lagerstätte. PMID:19324782

1. EXTERIOR VIEW OF 209 WARE STREET LOOKING SOUTH. THIS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. EXTERIOR VIEW OF 209 WARE STREET LOOKING SOUTH. THIS STRUCTURE WAS ONE OF APPROXIMATELY SEVENTEEN DUPLEXES BUILT AS THE ORIGINAL WORKER HOUSING FOR THE LaGRANGE COTTON MILLS, LATER KNOWN AS CALUMET MILL. LaGRANGE MILLS (1888-89) WAS THE FIRST COTTON MILL IN LaGRANGE. NOTE THE GABLE-ON-HIP ROOF FORM AND TWO IDENTICAL STRUCTURES VISIBLE TO THE LEFT. - 209 Ware Street (House), 209 Ware Street, La Grange, Troup County, GA

Study on ancient Chinese imitated GE ware by INAA and WDXRF

NASA Astrophysics Data System (ADS)

Xie, Guoxi; Feng, Songlin; Feng, Xiangqian; Wang, Yanqing; Zhu, Jihao; Yan, Lingtong; Li, Yongqiang; Han, Hongye

2007-11-01

Imitated GE ware was one of the most famous products of Jingdezhen porcelain field in Ming dynasty (AD 1368-1644). The exterior features of its body and glaze are very marvelous. Black foot, purple mouth and crazing glaze are the main features of imitated GE ware. Until now, the key conditions of resulting these features are not clearly identified. In order to find the critical elements for firing these features, instrumental neutron activation analysis (INAA) and wavelength-dispersive X-ray fluorescence (WDXRF) were used to determine the element abundance patterns of imitated GE ware body and glaze. The experimental data was compared with that of imitated Longquan celadon and of Longquan celadon. The analytical results indicated that Fe, Ti and Na were the critical elements. The body of imitated GE ware which contains high Fe and Ti are the basic conditions of firing its black body, black foot and purple mouth. The glaze of imitated GE ware which contains high Na is the main condition of producing its crazing glaze. Na is the critical element which enlarges the difference in expansion coefficients between the glaze and body of imitated GE ware. Furthermore, Zijin soil was added into kaolin to make the body rich in Fe and Ti. And something which was rich in Na was used to produce crazing glaze in the manufacturing process of imitated GE ware.

Effect of natural and synthetic organics on the processing of ceramics

NASA Astrophysics Data System (ADS)

Schulz, Brett M.

Dry pressing has been shown to be an efficient and cost effective method of manufacturing ceramic ware. Dry pressed parts are typically manufactured with a low moisture content which has the further advantage of eliminating the drying step that is necessary for plastic formed ware, i.e., jiggered or ram pressed. Problems associated with the use of dry pressing in an industrial setting involve the high loss rate during the bisque firing process and the poor surface finish of the green (unfired) ware. It was the goal of this research to improve the surface finish of dry pressed ware to a level that is satisfactory for decorating of the bisque fired ware. The adsorption of organic additives, specifically dispersants, on the surface of particles is an important aspect of ceramic processing. The interactions between organic additives, specifically sodium poly[acrylic acid] and poly[vinyl alcohol], have been demonstrated to result in phase separation into distinct domains during the spray-drying process. This phase separation leads to a poly[vinyl alcohol]-rich film on the surface of the granulate which will increase the P1 value, the pressure at the onset of granule deformation, of the granulate. This negative interaction between the organics increases the surface roughness of the dry pressed ware. The roughness of the industrially prepared ware was determined using an optical interferometer to set a baseline for improvements in the surface finish of the dry pressed ware. Blending of dried granulate was determined to significantly improve the surface finish of the ware. Alternative binders to replace a plasticized poly[vinyl alcohol] were observed to show improvements in the surface finish of the ware dry pressed in a semi-isostatic die. In summary the most important aspect to improving the surface finish of dry pressed ware, i.e. facilitating compaction, is the selection of the organic additives. Additives which are observed to have a negative interaction, i.e. to phase separate into distinct domains, will result in an organic rich film at the surface of the granule thus increasing the P1 value of the granulate.

Feasibility Study of Radar-Transmitting Materials.

DTIC Science & Technology

1985-03-15

ABS7RACT It is shown that it is unlikely that the principles that ware originally identified for investigation in this study can be used to obtain...transmitting materials by making the real part nr of the refractive index of the materials equal to one nr = 1. (1.1) A useful application is to obtain...reflectance great. Parrett1 suqaested the investigation of obtaining high microwave transmittance by using surace electron plasmas. Since the resonant

Archives, accessibility, and advocacy: a case study of strategies for creating and maintaining relevance

PubMed Central

Welch, Jennifer M; Hoffius, Susan D; Fox, E. Brooke

2011-01-01

Question/Objective: How can a special collection maintain or increase its profile in its parent institution, when that parent institution emphasizes scientific and clinical learning? Setting/Context: The Waring Historical Library, Medical University of South Carolina (MUSC), preserves and promotes the history of health sciences at MUSC and in South Carolina. As a state entity, MUSC has suffered significant budget cuts for the past several years. In this climate, the Waring had to find ways to maintain relevance in the MUSC community. Methods: The Waring partnered with the MUSC College of Nursing to explore new ways to build institutional allies. By combining traditional archival administration with innovative uses of digital collections aimed at institutional promotion and outreach, the Waring's digital library became an advocacy tool that led to the Waring's enhanced value to its parent institution. Outcomes: The Waring Library is a resource for MUSC development and alumni relations. Tangible outcomes include additional funding from grants, increased staff, no loss of institutional funding, increased access to collections, increased accessions, cultivation of institutional allies for long-term support of the Waring, and development of a template for future partnerships. PMID:21243056

Research and development of intelligent controller for high-grade sanitary ware

NASA Astrophysics Data System (ADS)

Bao, Kongjun; Shen, Qingping

2013-03-01

With the social and economic development and people's living standards improve, more and more emphasis on modern society, people improve the quality of family life, the use of intelligent controller applications in high-grade sanitary ware physiotherapy students. Analysis of high-grade sanitary ware physiotherapy common functions pointed out in the production and use of the possible risks, proposed implementation of the system hardware and matching, given the system software implementation process. High-grade sanitary ware physiotherapy intelligent controller not only to achieve elegant and beautiful, simple, physical therapy, water power, deodorant, multi-function, intelligent control, to meet the consumers, the high-end sanitary ware market, strong demand, Accelerate the enterprise product Upgrade and improve the competitiveness of enterprises.

Object detection in cinematographic video sequences for automatic indexing

NASA Astrophysics Data System (ADS)

Stauder, Jurgen; Chupeau, Bertrand; Oisel, Lionel

2003-06-01

This paper presents an object detection framework applied to cinematographic post-processing of video sequences. Post-processing is done after production and before editing. At the beginning of each shot of a video, a slate (also called clapperboard) is shown. The slate contains notably an electronic audio timecode that is necessary for audio-visual synchronization. This paper presents an object detection framework to detect slates in video sequences for automatic indexing and post-processing. It is based on five steps. The first two steps aim to reduce drastically the video data to be analyzed. They ensure high recall rate but have low precision. The first step detects images at the beginning of a shot possibly showing up a slate while the second step searches in these images for candidates regions with color distribution similar to slates. The objective is to not miss any slate while eliminating long parts of video without slate appearance. The third and fourth steps are statistical classification and pattern matching to detected and precisely locate slates in candidate regions. These steps ensure high recall rate and high precision. The objective is to detect slates with very little false alarms to minimize interactive corrections. In a last step, electronic timecodes are read from slates to automize audio-visual synchronization. The presented slate detector has a recall rate of 89% and a precision of 97,5%. By temporal integration, much more than 89% of shots in dailies are detected. By timecode coherence analysis, the precision can be raised too. Issues for future work are to accelerate the system to be faster than real-time and to extend the framework for several slate types.

Radon exhalation from building materials for decorative use.

PubMed

Chen, Jing; Rahman, Naureen M; Abu Atiya, Ibrahim

2010-04-01

Long-term exposure to radon increases the risk of developing lung cancer. There is considerable public concern about radon exhalation from building materials and the contribution to indoor radon levels. To address this concern, radon exhalation rates were determined for 53 different samples of drywall, tile and granite available on the Canadian market for interior home decoration. The radon exhalation rates ranged from non-detectable to 312 Bq m(-2) d(-1). Slate tiles and granite slabs had relatively higher radon exhalation rates than other decorative materials, such as ceramic or porcelain tiles. The average radon exhalation rates were 30 Bq m(-2) d(-1) for slate tiles and 42 Bq m(-2) d(-1) for granite slabs of various types and origins. Analysis showed that even if an entire floor was covered with a material having a radon exhalation rate of 300 Bq m(-2) d(-1), it would contribute only 18 Bq m(-3) to a tightly sealed house with an air exchange rate of 0.3 per hour. Generally speaking, building materials used in home decoration make no significant contribution to indoor radon for a house with adequate air exchange. Crown Copyright 2010. Published by Elsevier Ltd. All rights reserved.

Marketing: Giveaways that Give Back--Marketing with Promotional Items

ERIC Educational Resources Information Center

Germain, Carol Anne

2006-01-01

In marketing one's library wares, an effective publicity strategy is to use promotional giveaway materials, mainly personalized items that promote one's resources and services. As with any marketing effort, it is important to be clear about the promotional initiative and whom librarians are attempting to reach. This author emphasizes that…

Knowledge at No Cost

ERIC Educational Resources Information Center

Feintuch, Howard

2009-01-01

OpenCourseWare (OCW) program, offered at the Massachusetts Institute of Technology (MIT), provides open access to course materials for a large number of MIT classes. From this resource, American Megan Brewster, a recent graduate working in Guatemala, was able to formulate and implement a complete protocol to tackle Guatemala's need for a plastics…

76 FR 13602 - Porcelain-on-Steel Cooking Ware From the People's Republic of China: Continuation of Antidumping...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-14

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-506] Porcelain-on-Steel Cooking... cooking ware (``POS cookware'') from the People's Republic of China (``PRC'') would likely lead to a... should the order be revoked. See Porcelain-on-Steel Cooking Ware from the People's Republic of China...

Traditional application of slates in Uruguay

NASA Astrophysics Data System (ADS)

Morales Demarco, Manuela; Cardenes Van den Eynde, Víctor

2017-04-01

Commercial slates in Uruguay are represented by dolomitic and pelitic slates, which are known in the local market with the generic name of "piedra laja". The dolomitic slates, or more precisely the "slaty dolomitic semipelites" and "slaty dolomitic metacarbonate rocks" (following the nomenclature of the British Geological Survey for metamorphic rocks, Robertson 1999), dominates the production since 1960. The mining started in a quarry called "Libro Gigante", which means "giant book" in Spanish, as the slaty cleavage of these rocks is almost vertical, which resembles a book when looked from far away. These slates integrate the Lavalleja Group, a unit that comprises the schist belt of the Neoproterozoic Dom Feliciano Belt that crops out in south-eastern Uruguay. According to Morales Demarco et al (2013), there are two active slate mining districts in this region: the northern, called "Arroyo Minas Viejas Mining District", from where light grey, light and dark green and green-red slate varieties are mined, and the southern called "Arroyo Mataojo Mining District" and where only dark grey slates are extracted. Few kilometres eastern from these districts, and still in Lavalleja Group, a quarry of slaty dolomitic pelite is found with sporadic production. Far to the east, the slaty muscovitic pelites of Rocha Group are mined from one quarry in "Puntas del Chafalote". The traditional applications of these slates in the country are as façade cladding and floor slabs, both indoor and outdoor. The potential use of the dolomitic slates as roofing slates has been investigated and discarded by Morales Demarco et al (2013), as the slabs resulting from splitting are too thick (0.5 to 2 cm) and thus too heavy for this application. The parameter that controls the fissility of slates is the mass value (Bentz and Martini, 1968; DIN EN 12326-2, 2000) and is very important to determine their potential applications. It takes into account the number of mica layers per mm and the average width of these mica layers, being the former determinant for roofing slates, as according to Wagner (2007) slates with a number of mica layers per mm lower than 40 are not suitable as roofing and façade slates. All dolomitic slates have mass values below 40 (Morales Demarco et al, 2013), but this parameter has not been evaluated for the pelitic slates of Uruguay, and thus it remains unknown the potential of these rocks as roofing slates. Bentz A, Martini HJ (1968) Lehrbuch der Angewandten Geologie, Band 2, 1: Methoden zur Erforschung der Lagerstätten von Erzen, Kohle, Erdöl, Salzen, Industrie-Mineralen und Steinen und Erden. Sttutgart (Enke) DIN EN 12326-2 (2000) Schiefer und andere Natursteinprodukte für überlappende Dachdeckungen und Außenwandbekleidungen. Teil 2: Prüfverfahren. DIN Deutsches Institut für Normung e.V., Beuth, Berlin Morales Demarco M, Oyhantçabal P, Stein K-J, Siegesmund S (2013) Dolomitic slates from Uruguay: petrophysical and petromechanical characterization and deposit evaluation. Environ Earth Sci 69: 1361. doi:10.1007/s12665-012-1921-7 Wagner W (2007) Grundlagen für die Prüfung von Dach- und Wandschiefern. Z dt Ges Geowiss 158(4):785-805

75 FR 49549 - ABC & D Recycling, Inc.-Lease and Operation Exemption-a Line of Railroad in Ware, MA

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-13

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35397] ABC & D Recycling, Inc.--Lease and Operation Exemption--a Line of Railroad in Ware, MA ABC & D Recycling, Inc. (ABC & D..., ABC & D Recycling, Inc.--Lease and Operation Exemption--a Line of Railroad in Ware, Massachusetts (STB...

26. Detail, typical section of roof; note condition of slates, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

26. Detail, typical section of roof; note condition of slates, missing slates replaced by sheet metal inserts, heavy moss growth on lower edges of slates and completely filling channel of remaining gutter section; view to southwest from lift-bed truck, 135mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

[Using Raman spectrum analysis to research corrosive productions occurring in alloy of ancient bronze wares].

PubMed

Jia, La-jiang; Jin, Pu-jun

2015-01-01

The present paper analyzes the interior rust that occurred in bronze alloy sample from 24 pieces of Early Qin bronze wares. Firstly, samples were processed by grinding, polishing and ultrasonic cleaning-to make a mirror surface. Then, a confocal micro-Raman spectrometer was employed to carry out spectroscopic study on the inclusions in samples. The conclusion indicated that corrosive phases are PbCO3 , PbO and Cu2O, which are common rusting production on bronze alloy. The light-colored circular or massive irregular areas in metallographic structure of samples are proved as Cu2O, showing that bronze wares are not only easy to be covered with red Cu2O rusting layer, but also their alloy is easy to be eroded by atomic oxygen. In other words, the rust Cu2O takes place in both the interior and exterior parts of the bronze alloy. In addition, Raman spectrum analysis shows that the dark grey materials are lead corrosive products--PbCO3 and PbO, showing the corroding process of lead element as Pb -->PbO-->PbCO3. In the texture of cast state of bronze alloy, lead is usually distributed as independent particles between the different alloy phases. The lead particles in bronze alloy would have oxidation reaction and generate PbO when buried in the soil, and then have chemical reaction with CO3(2-) dissolved in the underground water to generate PbCO3, which is a rather stable lead corrosive production. A conclusion can be drawn that the external corrosive factors (water, dissolved oxygen and carbonate, etc) can enter the bronze ware interior through the passageway between different phases and make the alloy to corrode gradually.

Adsorption of Ten Microcystin Congeners to Common Laboratory-Ware Is Solvent and Surface Dependent.

PubMed

Altaner, Stefan; Puddick, Jonathan; Wood, Susanna A; Dietrich, Daniel R

2017-04-06

Cyanobacteria can produce heptapetides called microcystins (MC) which are harmful to humans due to their ability to inhibit cellular protein phosphatases. Quantitation of these toxins can be hampered by their adsorption to common laboratory-ware during sample processing and analysis. Because of their structural diversity (>100 congeners) and different physico-chemical properties, they vary in their adsorption to surfaces. In this study, the adsorption of ten different MC congeners (encompassing non-arginated to doubly-arginated congeners) to common laboratory-ware was assessed using different solvent combinations. Sample handling steps were mimicked with glass and polypropylene pipettes and vials with increasing methanol concentrations at two pH levels, before analysis by liquid chromatography-tandem mass spectrometry. We demonstrated that MC adsorb to polypropylene surfaces irrespective of pH. After eight successive pipet actions using polypropylene tips ca. 20% of the MC were lost to the surface material, which increased to 25%-40% when solutions were acidified. The observed loss was alleviated by changing the methanol (MeOH) concentration in the final solvent. The required MeOH concentration varied depending on which congener was present. Microcystins only adsorbed to glass pipettes (loss up to 30% after eight pipet actions) when in acidified aqueous solutions. The latter appeared largely dependent on the presence of ionizable groups, such as arginine residues.

"It's Not Their Job to Share Content": A Case Study of the Role of Senior Students in Adapting Teaching Materials as Open Educational Resources at the University of Cape Town

ERIC Educational Resources Information Center

Hodgkinson-Williams, Cheryl; Paskevicius, Michael

2013-01-01

Inspired by the Massachusetts Institute of Technology's landmark decision to make its teaching and learning materials freely available to the public as OpenCourseWare (OCW), many other higher education institutions have followed suit sharing resources now more generally referred to as Open Educational Resources (OER). The University of Cape Town…

Why Do People Share Content? Identifying Why Students Support Sharing Course Material

ERIC Educational Resources Information Center

Tromp, Gerhard Wieger; Long, Phillip D.

2013-01-01

To establish which factors predict student intentions to contribute towards an OpenCourseWare site, an online questionnaire was distributed among University of Queensland students via email. The 320 participants completed items that were based on the theory of planned behaviour and were designed to measure attitudes, subjective norms and perceived…

Open Course Ware, Distance Education, and 21st Century Geoscience Education

NASA Astrophysics Data System (ADS)

Connors, M. G.

2010-12-01

Open Course Ware (OCW) allows the highest quality educational materials (including videos of lectures from the best classroom lecturers) to find a wide audience. This audience may include many who wish to obtain credentials for formal study yet who are unable to be campus-based students. This opens a role for formal, credentialed and accredited distance education (DE) to efficiently integrate OCW into DE courses. OCW materials will in this manner be able to be used for education of credential-seeking students who would not otherwise benefit from them. Modern presentation methods using the Internet and video (including mobile device) technologies may offer pedagogical advantages over even traditional classroom learning. A detailed analysis of the development of Athabasca University’s PHYS 302 Vibrations and Waves course (based mainly on MIT’s OCW), and application of lessons learned to development of PHYS 305 Electromagnetism is presented. These courses are relevant to the study of geophysics, but examples of GEOL (Geology) courses will also be mentioned, along with an broad overview of OCW resources in Geoscience.

The impact of male burials on the construction of Corded Ware identity: Reconstructing networks of information in the 3rd millennium BC.

PubMed

Bourgeois, Quentin; Kroon, Erik

2017-01-01

The emergence of Corded Ware Groups throughout Europe in the 3rd millennium BC is one of the most defining events in European history. From the Wolga to the Rhine communities start to speak Indo-European languages and bury their dead in an extremely similar fashion. Recent ancient DNA-analyses identify a massive migration from the Eurasian steppe as the prime cause for this event. However, there is a fundamental difference between expressing a Corded Ware identity-the sharing of world views and ideas-and having a specific DNA-profile. Therefore, we argue that investigating the exchange of cultural information on burial rites between these communities serves as a crucial complement to the exchange of biological information. By adopting a practice perspective to 1161 Corded Ware burials throughout north-western Europe, combined with similarity indexes and network representations, we demonstrate a high degree of information sharing on the burial ritual between different regions. Moreover, we show that male burials are much more international in character than female burials and as such can be considered as the vector along which cultural information and Corded Ware identity was transmitted. This finding highlights an underlying complex societal organization of Corded Ware burial rites in which gender roles had a significant impact on the composition and transmission of cultural information. Our findings corroborate recent studies that suggest the Corded Ware was a male focused society.

Compositional data supports decentralized model of production and circulation of artifacts in the pre-Columbian south-central Andes.

PubMed

Lazzari, Marisa; Pereyra Domingorena, Lucas; Stoner, Wesley D; Scattolin, María Cristina; Korstanje, María Alejandra; Glascock, Michael D

2017-05-16

The circulation and exchange of goods and resources at various scales have long been considered central to the understanding of complex societies, and the Andes have provided a fertile ground for investigating this process. However, long-standing archaeological emphasis on typological analysis, although helpful to hypothesize the direction of contacts, has left important aspects of ancient exchange open to speculation. To improve understanding of ancient exchange practices and their potential role in structuring alliances, we examine material exchanges in northwest Argentina (part of the south-central Andes) during 400 BC to AD 1000 (part of the regional Formative Period), with a multianalytical approach (petrography, instrumental neutron activation analysis, laser ablation inductively coupled plasma mass spectrometry) to artifacts previously studied separately. We assess the standard centralized model of interaction vs. a decentralized model through the largest provenance database available to date in the region. The results show: ( i ) intervalley heterogeneity of clays and fabrics for ordinary wares; ( ii ) intervalley homogeneity of clays and fabrics for a wide range of decorated wares (e.g., painted Ciénaga); ( iii ) selective circulation of two distinct polychrome wares (Vaquerías and Condorhuasi); ( iv ) generalized access to obsidian from one major source and various minor sources; and ( v ) selective circulation of volcanic rock tools from a single source. These trends reflect the multiple and conflicting demands experienced by people in small-scale societies, which may be difficult to capitalize by aspiring elites. The study undermines centralized narratives of exchange for this period, offering a new platform for understanding ancient exchange based on actual material transfers, both in the Andes and beyond.

Compositional data supports decentralized model of production and circulation of artifacts in the pre-Columbian south-central Andes

PubMed Central

Pereyra Domingorena, Lucas; Stoner, Wesley D.; Scattolin, María Cristina; Korstanje, María Alejandra; Glascock, Michael D.

2017-01-01

The circulation and exchange of goods and resources at various scales have long been considered central to the understanding of complex societies, and the Andes have provided a fertile ground for investigating this process. However, long-standing archaeological emphasis on typological analysis, although helpful to hypothesize the direction of contacts, has left important aspects of ancient exchange open to speculation. To improve understanding of ancient exchange practices and their potential role in structuring alliances, we examine material exchanges in northwest Argentina (part of the south-central Andes) during 400 BC to AD 1000 (part of the regional Formative Period), with a multianalytical approach (petrography, instrumental neutron activation analysis, laser ablation inductively coupled plasma mass spectrometry) to artifacts previously studied separately. We assess the standard centralized model of interaction vs. a decentralized model through the largest provenance database available to date in the region. The results show: (i) intervalley heterogeneity of clays and fabrics for ordinary wares; (ii) intervalley homogeneity of clays and fabrics for a wide range of decorated wares (e.g., painted Ciénaga); (iii) selective circulation of two distinct polychrome wares (Vaquerías and Condorhuasi); (iv) generalized access to obsidian from one major source and various minor sources; and (v) selective circulation of volcanic rock tools from a single source. These trends reflect the multiple and conflicting demands experienced by people in small-scale societies, which may be difficult to capitalize by aspiring elites. The study undermines centralized narratives of exchange for this period, offering a new platform for understanding ancient exchange based on actual material transfers, both in the Andes and beyond. PMID:28461485

KeyWare: an open wireless distributed computing environment

NASA Astrophysics Data System (ADS)

Shpantzer, Isaac; Schoenfeld, Larry; Grindahl, Merv; Kelman, Vladimir

1995-12-01

Deployment of distributed applications in the wireless domain lack equivalent tools, methodologies, architectures, and network management that exist in LAN based applications. A wireless distributed computing environment (KeyWareTM) based on intelligent agents within a multiple client multiple server scheme was developed to resolve this problem. KeyWare renders concurrent application services to wireline and wireless client nodes encapsulated in multiple paradigms such as message delivery, database access, e-mail, and file transfer. These services and paradigms are optimized to cope with temporal and spatial radio coverage, high latency, limited throughput and transmission costs. A unified network management paradigm for both wireless and wireline facilitates seamless extensions of LAN- based management tools to include wireless nodes. A set of object oriented tools and methodologies enables direct asynchronous invocation of agent-based services supplemented by tool-sets matched to supported KeyWare paradigms. The open architecture embodiment of KeyWare enables a wide selection of client node computing platforms, operating systems, transport protocols, radio modems and infrastructures while maintaining application portability.

76 FR 90 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-03

... Concrete Steel Wire Strand A-580-852 1/1/10--12/31/10 Top-of-the Stove Stainless Steel Cooking Ware\\2\\ A... South Korea: Top-of-the-Stove Stainless Steel Cooking Ware \\3\\ C-580-602 1/1/10--11/21/10 The People's... antidumping duty order on Top-of-the Stove Stainless Steel Cooking Ware was revoked due to sunset review...

State-of-the-Art in Open Courseware Initiatives Worldwide

ERIC Educational Resources Information Center

Vladoiu, Monica

2011-01-01

We survey here the state-of-the-art in open courseware initiatives worldwide. First, the MIT OpenCourseWare project is overviewed, as it has been the real starting point of the OCW movement. Usually, open courseware refers to a free and open digital publication of high quality university level educational materials that are organized as courses,…

Adsorption of Ten Microcystin Congeners to Common Laboratory-Ware Is Solvent and Surface Dependent

PubMed Central

Altaner, Stefan; Puddick, Jonathan; Wood, Susanna A.; Dietrich, Daniel R.

2017-01-01

Cyanobacteria can produce heptapetides called microcystins (MC) which are harmful to humans due to their ability to inhibit cellular protein phosphatases. Quantitation of these toxins can be hampered by their adsorption to common laboratory-ware during sample processing and analysis. Because of their structural diversity (>100 congeners) and different physico-chemical properties, they vary in their adsorption to surfaces. In this study, the adsorption of ten different MC congeners (encompassing non-arginated to doubly-arginated congeners) to common laboratory-ware was assessed using different solvent combinations. Sample handling steps were mimicked with glass and polypropylene pipettes and vials with increasing methanol concentrations at two pH levels, before analysis by liquid chromatography-tandem mass spectrometry. We demonstrated that MC adsorb to polypropylene surfaces irrespective of pH. After eight successive pipet actions using polypropylene tips ca. 20% of the MC were lost to the surface material, which increased to 25%–40% when solutions were acidified. The observed loss was alleviated by changing the methanol (MeOH) concentration in the final solvent. The required MeOH concentration varied depending on which congener was present. Microcystins only adsorbed to glass pipettes (loss up to 30% after eight pipet actions) when in acidified aqueous solutions. The latter appeared largely dependent on the presence of ionizable groups, such as arginine residues. PMID:28383495

Configuring a Context-Aware Middleware for Wireless Sensor Networks

PubMed Central

Gámez, Nadia; Cubo, Javier; Fuentes, Lidia; Pimentel, Ernesto

2012-01-01

In the Future Internet, applications based on Wireless Sensor Networks will have to support reconfiguration with minimum human intervention, depending on dynamic context changes in their environment. These situations create a need for building these applications as adaptive software and including techniques that allow the context acquisition and decisions about adaptation. However, contexts use to be made up of complex information acquired from heterogeneous devices and user characteristics, making them difficult to manage. So, instead of building context-aware applications from scratch, we propose to use FamiWare, a family of middleware for Ambient Intelligence specifically designed to be aware of contexts in sensor and smartphone devices. It provides both, several monitoring services to acquire contexts from devices and users, and a context-awareness service to analyze and detect context changes. However, the current version of FamiWare does not allow the automatic incorporation related to the management of new contexts into the FamiWare family. To overcome this shortcoming, in this work, we first present how to model the context using a metamodel to define the contexts that must to be taken into account in an instantiation of FamiWare for a certain Ambient Intelligence system. Then, to configure a new context-aware version of FamiWare and to generate code ready-to-install within heterogeneous devices, we define a mapping that automatically transforms metamodel elements defining contexts into elements of the FamiWare family, and we also use the FamiWare configuration process to customize the new context-aware variant. Finally, we evaluate the benefits of our process, and we analyze both that the new version of the middleware works as expected and that it manages the contexts in an efficient way. PMID:23012505

OOPS, Turning MIT Opencourseware into Chinese: An Analysis of a Community of Practice of Global Translators

ERIC Educational Resources Information Center

Lee, Mimi Miyoung; Lin, Meng-Fen Grace; Bonk, Curtis J.

2007-01-01

An all-volunteer organization called the Opensource Opencourseware Prototype System (OOPS), headquartered in Taiwan, was initially designed to translate open source materials from MIT OpenCourseWare (OCW) site into Chinese. Given the recent plethora of open educational resources (OER), such as the OCW, the growing use of such resources by the…

Advantages and disadvantages of using intravenous tissue Plasminogen activator as salvage therapy for inoperable HeartWare thrombosis.

PubMed

Basken, Robyn; Bazzell, Charles M; Smith, Richard; Janardhanan, Rajesh; Khalpey, Zain

2017-07-01

Device thrombosis is a devastating complication of left ventricular assist devices. The definitive treatment has been device exchange or explant. Evidence of increasing morbidity and mortality with device exchange has shifted strategies toward conservative management. In this report, we detail the use of thrombolytics as salvage therapy in a patient with an occlusive HeartWare ventricular assist device (HeartWare Inc., Framingham, MA) thrombus, resulting in long-term survival without further intervention. © 2017 Wiley Periodicals, Inc.

Frictional Behavior of Altered Basement Approaching the Nankai Trough

NASA Astrophysics Data System (ADS)

Saffer, D. M.; Ikari, M.; Rooney, T. O.; Marone, C.

2017-12-01

The frictional behavior of basement rocks plays an important role in subduction zone faulting and seismicity. This includes earthquakes seaward of the trench, large megathrust earthquakes where seamounts are subducting, or where the plate interface steps down to basement. In exhumed subduction zone rocks such as the Shimanto complex in Japan, slivers of basalt are entrained in mélange which is evidence of basement involvement in the fault system. Scientific drilling during the Nankai Trough Seismogenic Zone Experiment (NanTroSEIZE) recovered basement rock from two reference sites (C0011 and C0012) located seaward of the trench offshore the Kii Peninsula during Integrated Ocean Discovery Program (IODP) Expeditions 322 and 333. The basement rocks are pillow basalts that appear to be heterogeneously altered, resulting in contrasting dense blue material and more vesicular gray material. Major element geochemistry shows differences in silica, calcium oxides and loss-on-ignition between the two types of samples. Minor element geochemistry reveals significant differences in vanadium, chromium, and barium. X-ray diffraction on a bulk sample powder representing an average composition shows a phyllosilicate content of 20%, most of which is expandable clays. We performed laboratory friction experiments in a biaxial testing apparatus as either intact sample blocks, or as gouge powders. We combine these experiments with measurements of Pennsylvania slate for comparison, including a mixed-lithology intact block experiment. Intact Nankai basement blocks exhibit a coefficient of sliding friction of 0.73; for Nankai basement powder, slate powder, slate blocks and slate-on-basement blocks the coefficient of sliding friction ranges from 0.44 to 0.57. At slip rates ranging from 3x10-8 to 3x10-4 m/s we observe predominantly velocity-strengthening frictional behavior, indicating a tendency for stable slip. At rates of < 1x10-6 m/s some velocity-weakening was observed, specifically in intact rock-on-rock experiments. Our results show that basement alteration tends to reduce the tendency for unstable slip, but that the altered Nankai basement may still exhibit seismogenic behavior in the case of localized slip in competent rock.

SPARCHS: Symbiotic, Polymorphic, Automatic, Resilient, Clean-Slate, Host Security

DTIC Science & Technology

2016-03-01

SPARCHS: SYMBIOTIC , POLYMORPHIC, AUTOMATIC, RESILIENT, CLEAN-SLATE, HOST SECURITY COLUMBIA UNIVERSITY MARCH 2016 FINAL... SYMBIOTIC , POLYMORPHIC, AUTOTOMIC, RESILIENT, CLEAN-SLATE, HOST SECURITY 5a. CONTRACT NUMBER N/A 5b. GRANT NUMBER FA8750-10-2-0253 5c. PROGRAM...17 4.2.3 SYMBIOTIC EMBEDDED MACHINES

SLATE: scanning laser automatic threat extraction

NASA Astrophysics Data System (ADS)

Clark, David J.; Prickett, Shaun L.; Napier, Ashley A.; Mellor, Matthew P.

2016-10-01

SLATE is an Autonomous Sensor Module (ASM) designed to work with the SAPIENT system providing accurate location tracking and classifications of targets that pass through its field of view. The concept behind the SLATE ASM is to produce a sensor module that provides a complementary view of the world to the camera-based systems that are usually used for wide area surveillance. Cameras provide a hi-fidelity, human understandable view of the world with which tracking and identification algorithms can be used. Unfortunately, positioning and tracking in a 3D environment is difficult to implement robustly, making location-based threat assessment challenging. SLATE uses a Scanning Laser Rangefinder (SLR) that provides precise (<1cm) positions, sizes, shapes and velocities of targets within its field-of-view (FoV). In this paper we will discuss the development of the SLATE ASM including the techniques used to track and classify detections that move through the field of view of the sensor providing the accurate tracking information to the SAPIENT system. SLATE's ability to locate targets precisely allows subtle boundary-crossing judgements, e.g. on which side of a chain-link fence a target is. SLATE's ability to track targets in 3D throughout its FoV enables behavior classification such as running and walking which can provide an indication of intent and help reduce false alarm rates.

Different surgical strategies for implantation of continuous-flow VADs—Experience from Deutsches Herzzentrum Berlin

PubMed Central

Drews, Thorsten; Potapov, Evgenij; Weng, Yugo; Pasic, Miralem; Hetzer, Roland

2014-01-01

Objective This manuscript summarizes our surgical experience with the implantation of recent continuous-flow left ventricular assist devices (LVADs), with special emphasis on the HeartWare HVAD pump. Methods The HeartWare HVAD is, in our experience currently implanted in four different techniques: (I) “Classical” LVAD implantation with heart-lung machine and median sternotomy; (II) “Minimally-invasive” implantation without sternotomy and without heart-lung machine; (III) “Lateral implantation” to the descending aorta; (IV) Using two continuous-flow LVADs for implantable biventricular support. Results Five-hundred and four HeartWare HVADs have been implanted using the described techniques in our institution up to now. Conclusions The HeartWare HVAD is a versatile device. It has been found to be eminently suited to these four different modes of implantation. PMID:25452906

Metal release and sequestration from black slate mediated by a laccase of Schizophyllum commune.

PubMed

Kirtzel, Julia; Scherwietes, Eric Leon; Merten, Dirk; Krause, Katrin; Kothe, Erika

2018-06-25

Schizophyllum commune is a filamentous basidiomycete which can degrade complex organic macromolecules like lignin by the secretion of a large repertoire of enzymes. One of these white rot enzymes, laccase, exhibits a broad substrate specificity and is able to oxidize a variety of substances including carbonaceous rocks. To investigate the role of laccase in bioweathering, laccase gene lcc2 was overexpressed, and the influence on weathering of black slate, originating from a former alum mine in Schmiedefeld, Germany, was examined. The metal release from the rock material was enhanced, associated with a partial metal accumulation into the mycelium. A sequestration of metals could be shown with fluorescent staining methods, and an accumulation of Zn, Cd, and Pb was visualized in different cell organelles. Additionally, we could show an increased metal resistance of the laccase overexpressing strain.

Topology Optimization of an Aircraft Wing

DTIC Science & Technology

2015-06-11

Fraction VWT Virtual Wind Tunnel xvi TOPOLOGY OPTIMIZATION OF AN AIRCRAFT WING I. Introduction 1.1 Background Current aircraft wing design , which...ware in order to optimize the design of individual spars and wing-box structures for large commercial aircraft . They considered a hybrid global/local...weight in an aircraft by eliminating unnecessary material. An optimized approach has the potential to streamline the design process by allowing a

Superior accuracy of model-based radiostereometric analysis for measurement of polyethylene wear

PubMed Central

Stilling, M.; Kold, S.; de Raedt, S.; Andersen, N. T.; Rahbek, O.; Søballe, K.

2012-01-01

Objectives The accuracy and precision of two new methods of model-based radiostereometric analysis (RSA) were hypothesised to be superior to a plain radiograph method in the assessment of polyethylene (PE) wear. Methods A phantom device was constructed to simulate three-dimensional (3D) PE wear. Images were obtained consecutively for each simulated wear position for each modality. Three commercially available packages were evaluated: model-based RSA using laser-scanned cup models (MB-RSA), model-based RSA using computer-generated elementary geometrical shape models (EGS-RSA), and PolyWare. Precision (95% repeatability limits) and accuracy (Root Mean Square Errors) for two-dimensional (2D) and 3D wear measurements were assessed. Results The precision for 2D wear measures was 0.078 mm, 0.102 mm, and 0.076 mm for EGS-RSA, MB-RSA, and PolyWare, respectively. For the 3D wear measures the precision was 0.185 mm, 0.189 mm, and 0.244 mm for EGS-RSA, MB-RSA, and PolyWare respectively. Repeatability was similar for all methods within the same dimension, when compared between 2D and 3D (all p > 0.28). For the 2D RSA methods, accuracy was below 0.055 mm and at least 0.335 mm for PolyWare. For 3D measurements, accuracy was 0.1 mm, 0.2 mm, and 0.3 mm for EGS-RSA, MB-RSA and PolyWare respectively. PolyWare was less accurate compared with RSA methods (p = 0.036). No difference was observed between the RSA methods (p = 0.10). Conclusions For all methods, precision and accuracy were better in 2D, with RSA methods being superior in accuracy. Although less accurate and precise, 3D RSA defines the clinically relevant wear pattern (multidirectional). PolyWare is a good and low-cost alternative to RSA, despite being less accurate and requiring a larger sample size. PMID:23610688

Stroke and Intracranial Hemorrhage in HeartMate II and HeartWare Left Ventricular Assist Devices: A Systematic Review.

PubMed

Cho, Sung M; Moazami, Nader; Frontera, Jennifer A

2017-08-01

Ischemic stroke and intracranial hemorrhage (ICH) following left ventricular assist device (LVAD) placement are major causes of morbidity. The incidence and mortality associated with these events stratified by device type have not been systematically explored. A systematic review of PubMed was conducted from January 2007 through June 2016 for all English-language articles involving HeartMate II (HMII) and HeartWare LVAD patients. Ischemic stroke and/or ICH incidence (events per patient-year) and associated mortality rates were abstracted for each device type. Of 735 articles reviewed, 48 (11,310 patients) met inclusion criteria (33 HMII, six HeartWare, eight both devices, and one unspecified). The median duration of device support was 112 days (total 13,723 patient-years). Overall, ischemic stroke or ICH occurred in 9.8% (1110 persons and 0.08 events per patient year [EPPY]). Ischemic stroke occurred in a median of 6.0% or 0.06 EPPY (range 0-16% or 0-0.21 EPPY) of HMII patients versus 7.5% or 0.09 EPPY (range 4-17.1% or 0.01-0.94 EPPY) of HeartWare patients. ICH occurred in a median of 3.0% or 0.04 EPPY (range 0-13.5% or 0-0.13 EPPY) of HMII and 8.0% or 0.08 EPPY (range 3-23% or 0.01-0.56 EPPY) of HeartWare patients. The median mortality rate for LVAD-associated ischemic stroke was 31% (HMII: 33%, [range 2.4-75%] and HeartWare: 11.5% [range 3.9-40%]), and the median mortality rate following ICH was 71% (HMII: 75%, [range 3.9-100%] and HeartWare: 44%, [range 3.1-88%]). Ischemic stroke and ICH are common after LVAD placement, but heterogeneous event rates are reported in the literature. Given the high associated mortality, further prospective study is warranted.

27 CFR 9.61 - El Dorado.

Code of Federal Regulations, 2012 CFR

2012-04-01

....” (“Tunnel Hill” and “Slate Mountain” Quadrangles); (5) Thence east along the range line to its intersection with the range line “R. 12 E./R. 13 E.” (“Slate Mountains” and “Pollock Pines” Quadrangles); (6) Thence...,” 1952 (photorevised 1973); (7) “Tunnel Hill, California,” 1950 (photorevised 1973); (8) “Slate Mountain...

27 CFR 9.61 - El Dorado.

Code of Federal Regulations, 2013 CFR

2013-04-01

....” (“Tunnel Hill” and “Slate Mountain” Quadrangles); (5) Thence east along the range line to its intersection with the range line “R. 12 E./R. 13 E.” (“Slate Mountains” and “Pollock Pines” Quadrangles); (6) Thence...,” 1952 (photorevised 1973); (7) “Tunnel Hill, California,” 1950 (photorevised 1973); (8) “Slate Mountain...

27 CFR 9.61 - El Dorado.

Code of Federal Regulations, 2014 CFR

2014-04-01

....” (“Tunnel Hill” and “Slate Mountain” Quadrangles); (5) Thence east along the range line to its intersection with the range line “R. 12 E./R. 13 E.” (“Slate Mountains” and “Pollock Pines” Quadrangles); (6) Thence...,” 1952 (photorevised 1973); (7) “Tunnel Hill, California,” 1950 (photorevised 1973); (8) “Slate Mountain...

Electrostatics of Granular Materials

NASA Technical Reports Server (NTRS)

Marshall, John

2004-01-01

The purpose of the research was to continue developing an understanding of electrostatic phenomena in preparation for any future flight opportunities of the EGM experiment, originally slated for a 2004 Space Station deployment. Work would be based on theoretical assessments, ground-based lab experiments, and reduced-gravity experiments. The ability to examine dipoles in the lab proved to be elusive, and thus, effort was concentrated on monopoles -how materials become charged, the fate of the charge, the role of material type, and so forth. Several significant milestones were achieved in this regard. In regard of the dipoles, experiments were designed in collaboration with the University of Chicago school district who had access to reduced gravity on the KC-135 aircraft. Two experiments were slated to fly last year but were cancelled after the Columbia accident. One of the experiments has been given a second life and will fly sometime in 2005 if the Shuttle flights resume. There remains active interest in the question of electrostatic dipoles within the educational community, and experiments using magnetic dipoles as a substitute are to be examined. The KC-135 experiments will also examine dispersion methods for particles as a verification of possible future techniques in microgravity. Both laboratory and theoretical work established a number of breakthroughs in our understanding of electrostatic phenomena. These breakthroughs are listed in this paper.

Global demand for rare earth resources and strategies for green mining

USDA-ARS?s Scientific Manuscript database

Rare earths elements (REEs) are essential raw materials for the emerging green (low-carbon) energy technologies and ‘smart’ electronic devices. Global REE demand is slated to grow at a compound annual rate of 5% by 2020. Such high growth rate would require a steady supply base of REEs in the long ru...

XpressWare Installation User guide

NASA Astrophysics Data System (ADS)

Duffey, K. P.

XpressWare is a set of X terminal software, released by Tektronix Inc, that accommodates the X Window system on a range of host computers. The software comprises boot files (the X server image), configuration files, fonts, and font tools to support the X terminal. The files can be installed on one host or distributed across multiple hosts The purpose of this guide is to present the system or network administrator with a step-by-step account of how to install XpressWare, and how subsequently to configure the X terminals appropriately for the environment in which they operate.

Michael Tuomey's 1848 geological survey of South Carolina

USGS Publications Warehouse

Nystrom, P.G.

1999-01-01

One hundred and fifty years ago, Michael Tuomey completed his 'Report on the Geology of South Carolina,' the result of four years of arduous labor. The report is the first detailed and comprehensive geological description of the entire state, and it includes a geological map that shows the distribution of Coastal Plain and Piedmont-Blue Ridge units. In the sesquicentennial of Tuomey's survey, it is fitting that we recognize his important early contribution to the geology of South Carolina and the southeast. Tuomey's report is a 293-page volume with a 48-page appendix and an index. Although he gave a complete depiction of Coastal Plain geology and delineated Cretaceous, Lower Eocene, Eocene, Miocene, Post-Pliocene, and alluvial units on his map, the emphasis herein is on his mapping of the Piedmont and Blue Ridge. The metamorphic units he delineated are clay slate, mica slate, talcose slate, hornblende slate, gneiss, and lime rock. Gneiss is the most extensive unit on the map. His map shows many elements of the geologic framework we recognize today. The distribution of his clay slate unit corresponds closely with the Carolina slate and Bel Air belts as we know them now. The gneiss between the two clay slate areas matches the Kiokee belt. Areas of mica slate approximate the northern part of the Kings Mountain belt and the Chauga belt. He also recognized that his talcose slate unit was associated with gold deposits. Granitic and basaltic intrusive rocks are also delineated on the map. It shows the Newberry, Columbia, and Liberty Hill granites we recognize today. Basaltic intrusives outlined include the Bush River of western Newberry County, Dutchmans Creek, Big Wateree Creek, and Ogden gabbros. He described the regional extent of diabase dikes as occuring from Virginia to Alabama, noted their preferred direction and diagrammed their near-vertical orientation. He also referred to the distinctive soil and topography that develops on the large gabbros. Michael Tuomey's report is truly a benchmark publication, for sixty years passed before the next statewide survey was done. Upon completing the report, he left South Carolina to become director of the Alabama Geological Survey.

Results of the post-market Registry to Evaluate the HeartWare Left Ventricular Assist System (ReVOLVE).

PubMed

Strueber, Martin; Larbalestier, Robert; Jansz, Paul; Zimpfer, Daniel; Fiane, Arnt E; Tsui, Steven; Simon, André; Schmitto, Jan D; Khaghani, Asghar; Wieselthaler, George M; Najarian, Kevin; Schueler, Stephan

2014-05-01

The post-market Registry to Evaluate the HeartWare Left Ventricular Assist System (ReVOLVE) is an investigator-initiated registry established to collect post-CE Mark Trial clinical data on patients receiving a HeartWare ventricular assist device (HVAD) in the European Union and Australia. The ReVOLVE is a multi-center, prospective, single-arm registry performed at seven centers in Europe and two in Australia. Herein we describe a total of 254 commercial HVAD implants according to labeled indications between February 2009 and November 2012. Summary statistics included patients' demographics, adverse events, length of support and outcomes. Compared with the clinical trial supporting the CE Mark of the HeartWare system, patient selection differed in that patients were older, and there were higher proportions of females and patients with idiopathic cardiomyopathies in the ReVOLVE cohort. Duration of support ranged from 1 to 1,057 days, with a mean of 363 ± 280 days (median 299.5 days). Transplantation was done in 56 patients (22%), explant for recovery was performed in 3 patients (1%), 43 died while on support (17%), and 152 (60%) remain on the device. Success in patients with the HeartWare system was 87% at 6 months, 85% at 1 year, 79% at 2 years and 73% at 3 years. Adverse event rates were low, comparable or improved when compared to the CE Mark Trial. Real-world use of the HeartWare system continues to demonstrate excellent clinical outcomes in patients supported with the device. Copyright © 2014 International Society for Heart and Lung Transplantation. Published by Elsevier Inc. All rights reserved.

Star Ware: The Amateur Astronomer's Guide to Choosing, Buying, and Using Telescopes and Accessories, 3rd Edition

NASA Astrophysics Data System (ADS)

Harrington, Philip S.

2002-05-01

Praise for the Second Edition of Star Ware "Star Ware is still a tour de force that any experienced amateur will find invaluable, and which hardware-minded beginners will thoroughly enjoy." -Robert Burnham, Sky & Telescope magazine "Star Ware condenses between two covers what would normally take a telescope buyer many months to accumulate." -John Shibley, Astronomy magazine Now more than ever, the backyard astronomer has a dazzling array of choices when it comes to telescope shopping-which can make choosing just the right sky-watching equipment a formidable challenge. In this revised and updated edition of Star Ware, the essential guide to buying astronomical equipment, award-winning astronomy writer Philip Harrington does the work for you, analyzing and exploring today's astronomy market and offering point-by-point comparisons of everything you need. Whether you're an experienced amateur astronomer or just getting started, Star Ware, Third Edition will prepare you to explore the farthest reaches of space with: Extensive, expanded reviews of leading models and accessories, including dozens of new products, to help you buy smart

75 FR 1333 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

... KOREA: Top-of-the Stove Stainless Steel Cooking Ware A-580-601 1/1/09 - 12/31/09 THAILAND: Prestressed...-of-the-Stove Stainless Steel Cooking Ware C-580-602 1/1/09 - 12/31/09 Suspension Agreements MEXICO...

HeartWare HVAD for Biventricular Support in Children and Adolescents: The Stanford Experience.

PubMed

Stein, Mary Lyn; Yeh, Justin; Reinhartz, Olaf; Rosenthal, David N; Kaufman, Beth D; Almond, Chris S; Hollander, Seth A; Maeda, Katsuhide

2016-01-01

Despite increasing use of mechanical circulatory support in children, experience with biventricular device implantation remains limited. We describe our experience using the HeartWare HVAD to provide biventricular support to three patients and compare these patients with five patients supported with HeartWare left ventricular assist device (LVAD). At the end of the study period, all three biventricular assist device (BiVAD) patients had been transplanted and were alive. LVAD patients were out of bed and ambulating a median of 10.5 days postimplantation. The BiVAD patients were out of bed a median of 31 days postimplantation. Pediatric patients with both left ventricular and biventricular heart failure can be successfully bridged to transplantation with the HeartWare HVAD. Rapid improvement in functional status following HVAD implantation for isolated left ventricular support is seen. Patients supported with BiVAD also demonstrate functional recovery, albeit more modestly. In the absence of infection, systemic inflammatory response raises concern for inadequate support.

Anechoic chamber in industrial plants. [construction materials and structural design

NASA Technical Reports Server (NTRS)

Halpert, E.; Juncu, O.; Lorian, R.; Marfievici, D.; Mararu, I.

1974-01-01

A light anechoic chamber for routine acoustical measurements in the machine building industry is reported. The outer housing of the chamber consists of modules cast in glass fiber reinforced polyester resin; the inner housing consists of pyramidal modules cut out of sound absorbing slates. The parameters of this anechoic chamber facilitate acoustical measurements according to ISO and CAEM recommendations.

78 FR 60245 - Privacy Act Systems of Records; LabWare Laboratory Information Management System

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-01

... Services Laboratories (NVSL). Diagnostic testing provides official test results for animal imports, exports.... Diagnostic testing is also done in connection with suspected foreign animal disease investigations and... of Records; LabWare Laboratory Information Management System AGENCY: Animal and Plant Health...

Improving the Performance of Highly Constrained Water Resource Systems using Multiobjective Evolutionary Algorithms and RiverWare

NASA Astrophysics Data System (ADS)

Smith, R.; Kasprzyk, J. R.; Zagona, E. A.

2015-12-01

Instead of building new infrastructure to increase their supply reliability, water resource managers are often tasked with better management of current systems. The managers often have existing simulation models that aid their planning, and lack methods for efficiently generating and evaluating planning alternatives. This presentation discusses how multiobjective evolutionary algorithm (MOEA) decision support can be used with the sophisticated water infrastructure model, RiverWare, in highly constrained water planning environments. We first discuss a study that performed a many-objective tradeoff analysis of water supply in the Tarrant Regional Water District (TRWD) in Texas. RiverWare is combined with the Borg MOEA to solve a seven objective problem that includes systemwide performance objectives and individual reservoir storage reliability. Decisions within the formulation balance supply in multiple reservoirs and control pumping between the eastern and western parts of the system. The RiverWare simulation model is forced by two stochastic hydrology scenarios to inform how management changes in wet versus dry conditions. The second part of the presentation suggests how a broader set of RiverWare-MOEA studies can inform tradeoffs in other systems, especially in political situations where multiple actors are in conflict over finite water resources. By incorporating quantitative representations of diverse parties' objectives during the search for solutions, MOEAs may provide support for negotiations and lead to more widely beneficial water management outcomes.

CD-ROM Networking: Navigating through VINES and NetWare and the New Software Technologies.

ERIC Educational Resources Information Center

Lieberman, Paula

1995-01-01

Provides an overview of developments in CD-ROM networking technology and describes products offered by Axis, Banyan (VINES--network operating environment), CD Connection, Celerity, Data/Ware, Document Imaging Systems Corporation (DISC), Imagery, Jodian, Meridian, Micro Design International, Microsoft, Microtest, Novell, OnLine Computer Systems,…

Chronic obstructive pulmonary disease in Welsh slate miners.

PubMed

Reynolds, C J; MacNeill, S J; Williams, J; Hodges, N G; Campbell, M J; Newman Taylor, A J; Cullinan, P

2017-01-01

Exposure to respirable crystalline silica (RCS) causes emphysema, airflow limitation and chronic obstructive pulmonary disease (COPD). Slate miners are exposed to slate dust containing RCS but their COPD risk has not previously been studied. To study the cumulative effect of mining on lung function and risk of COPD in a cohort of Welsh slate miners and whether these were independent of smoking and pneumoconiosis. The study was based on a secondary analysis of Medical Research Council (MRC) survey data. COPD was defined as forced expiratory volume in 1 s/forced vital capacity (FEV 1 /FVC) ratio <0.7. We created multivariable models to assess the association between mining and lung function after adjusting for age and smoking status. We used linear regression models for FEV 1 and FVC and logistic regression for COPD. In the original MRC study, 1255 men participated (726 slate miners, 529 unexposed non-miners). COPD was significantly more common in miners (n = 213, 33%) than non-miners (n = 120, 26%), P < 0.05. There was no statistically significant difference in risk of COPD between miners and non-miners when analysis was limited to non-smokers or those without radiographic evidence of pneumoconiosis. After adjustment for smoking, slate mining was associated with a reduction in %predicted FEV 1 [β coefficient = -3.97, 95% confidence interval (CI) -6.65, -1.29] and FVC (β coefficient = -2.32, 95% CI -4.31, -0.33) and increased risk of COPD (odds ratio: 1.38, 95% CI 1.06, 1.81). Slate mining may reduce lung function and increase the incidence of COPD independently of smoking and pneumoconiosis. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

A Description of the Development, Capabilities, and Operational Status of the Test SLATE Data Acquisition System at the National Transonic Facility

NASA Technical Reports Server (NTRS)

Cramer, Christopher J.; Wright, James D.; Simmons, Scott A.; Bobbitt, Lynn E.; DeMoss, Joshua A.

2015-01-01

The paper will present a brief background of the previous data acquisition system at the National Transonic Facility (NTF) and the reasoning and goals behind the upgrade to the current Test SLATE (Test Software Laboratory and Automated Testing Environments) data acquisition system. The components, performance characteristics, and layout of the Test SLATE system within the NTF control room will be discussed. The development, testing, and integration of Test SLATE within NTF operations will be detailed. The operational capabilities of the system will be outlined including: test setup, instrumentation calibration, automatic test sequencer setup, data recording, communication between data and facility control systems, real time display monitoring, and data reduction. The current operational status of the Test SLATE system and its performance during recent NTF testing will be highlighted including high-speed, frame-by-frame data acquisition with conditional sampling post-processing applied. The paper concludes with current development work on the system including the capability for real-time conditional sampling during data acquisition and further efficiency enhancements to the wind tunnel testing process.

Analysis of energy use and CO2 emissions in the U.S. refining sector, with projections for 2025.

PubMed

Hirshfeld, David S; Kolb, Jeffrey A

2012-04-03

This analysis uses linear programming modeling of the U.S. refining sector to estimate total annual energy consumption and CO(2) emissions in 2025, for four projected U.S. crude oil slates. The baseline is similar to the current U.S. crude slate; the other three contain larger proportions of higher density, higher sulfur crudes than the current or any previous U.S. crude slates. The latter cases reflect aggressive assumptions regarding the volumes of Canadian crudes in the U.S. crude slate in 2025. The analysis projects U.S. refinery energy use 3.7%-6.3% (≈ 0.13-0.22 quads/year) higher and refinery CO(2) emissions 5.4%-9.3% (≈ 0.014-0.024 gigatons/year) higher in the study cases than in the baseline. Refining heavier crude slates would require significant investments in new refinery processing capability, especially coking and hydrotreating units. These findings differ substantially from a recent estimate asserting that processing heavy oil or bitumen blends could increase industry CO(2) emissions by 1.6-3.7 gigatons/year.

75 FR 74682 - Antidumping or Countervailing Duty Order, Finding, or Suspended Investigation; Opportunity To...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-01

...-605... 12/1/09-11/30/10 Porcelain-On-Steel Cooking Ware A-583-508........ 12/1/09-11/30/10 Welded Astm... Fittings A-570-881...... 12/1/09-11/30/10 Porcelain-on-Steel Cooking Ware A-570-506........ 12/1/09-11/30...

Combustion Mechanisms of Very High Burn Rate (VHBR) Propellant. Phase II.

DTIC Science & Technology

1995-09-01

potassium salt of B10H1 2-. The Kraton slate and the Hycar slate both contain RDX as the oxidizer, while the PEG slate contains HMX and TAGN in the... polyacrylate (Hycar), hydroxy-terminated polybutadiene, and a mixture of styrene and ethylene-butylene (Kraton). As might be expected, when all else is equal...proprietary formulations of Teledyne-McCormick-Selph (TMS), designated H498 and H466. In H498, a potassium cation is utilized, while in H466, an

Fine bakery wares with label claims in Europe and their categorisation by nutrient profiling models.

PubMed

Trichterborn, J; Harzer, G; Kunz, C

2011-03-01

This study assesses a range of commercially available fine bakery wares with nutrition or health related on-pack communication against the criteria of selected nutrient profiling models. Different purposes of the application of nutrient profiles were considered, including front-of-pack signposting and the regulation of claims or advertising. More than 200 commercially available fine bakery wares carrying claims were identified in Germany, France, Spain, Sweden and United Kingdom and evaluated against five nutrient profiling models. All models were assessed regarding their underlying principles, generated results and inter-model agreement levels. Total energy, saturated fatty acids, sugars, sodium and fibre were critical parameters for the categorisation of products. The Choices Programme was the most restrictive model in this category, while the Food and Drug Administration model allowed the highest number of products to qualify. According to all models, more savoury than sweet products met the criteria. On average, qualifying products contained less than half the amounts of nutrients to limit and more than double the amount of fibre compared with all the products in the study. None of the models had a significant impact on the average energy contents. Nutrient profiles can be applied to identify fine bakery wares with a significantly better nutritional composition than the average range of products positioned as healthier. Important parameters to take into account include energy, saturated fatty acids, sugars, sodium and fibre. Different criteria sets for subcategories of fine bakery wares do not seem necessary.

Pots, plates and provenance: sourcing Indian coarse wares from Mleiha using X-ray fluorescence (XRF) spectrometry analysis

NASA Astrophysics Data System (ADS)

Reddy, A.; Attaelmanan, A. G.; Mouton, M.

2012-07-01

The identification of more than 25% of the pottery sherds from the late PIR.D period (ca. 2nd - mid. 3rd c. AD) assemblage from the recently excavated building H at Mleiha as Indian is based on form and fabric, but using only visual assessment. Petrographic analysis of the fabrics can provide more precise indicators of the geographical origin of the wares. In this study, a total of 21 sherds from various key sites in Western India were compared with 7 different 'Indian' coarse-ware vessels sampled at Mleiha using X-ray fluorescence (XRF) spectrometry. The analyses were conducted on powdered samples collected from the core of each sherd. Each sample was irradiated for 1000 seconds using a 1.2 mm diameter X-ray beam. The resulting spectra were used for quantification of the X-ray intensity and elemental concentration. Levels of correlation in the elemental ratios of the sherds were statistically tested using an F-test as well as a Chi-test. Initial review of the XRF results indicates that the Maharashtra and Gujarat regions of India are probable source areas for at least two of the types of wares. Collection of additional samples from these areas and other regions of India, and further statistical analysis through methods such as Principal Component Analysis will help to isolate groups of wares from India and correlate them with types of vessels imported into the Oman peninsula in antiquity.

Modeling Dissolved Solids in the Rincon Valley, New Mexico Using RiverWare

NASA Astrophysics Data System (ADS)

Abudu, S.; Ahn, S. R.; Sheng, Z.

2017-12-01

Simulating transport and storage of dissolved solids in surface water and underlying alluvial aquifer is essential to evaluate the impacts of surface water operations, groundwater pumping, and climate variability on the spatial and temporal variability of salinity in the Rio Grande Basin. In this study, we developed a monthly RiverWare water quantity and quality model to simulate the both concentration and loads of dissolved solids for the Rincon Valley, New Mexico from Caballo Reservoir to Leasburg Dam segment of the Rio Grande. The measured flows, concentration and loads of dissolved solids in the main stream and drains were used to develop RiveWare model using 1980-1988 data for calibration, and 1989-1995 data for validation. The transport of salt is tracked using discretized salt and post-process approaches. Flow and salt exchange between the surface water and adjacent groundwater objects is computed using "soil moisture salt with supplemental flow" method in the RiverWare. In the groundwater objects, the "layered salt" method is used to simulate concentration of the dissolved solids in the shallow groundwater storage. In addition, the estimated local inflows under different weather conditions by using a calibrated Soil Water Assessment Tool (SWAT) were fed into the RiverWare to refine the simulation of the flow and dissolved solids. The results show the salt concentration and loads increased at Leasburg Dam, which indicates the river collects salts from the agricultural return flow and the underlying aquifer. The RiverWare model with the local inflow fed by SWAT delivered the better quantification of temporal and spatial salt exchange patterns between the river and the underlying aquifer. The results from the proposed modeling approach can be used to refine the current mass-balance budgets for dissolved-solids transport in the Rio Grande, and provide guidelines for planning and decision-making to control salinity in arid river environment.

Outcomes of HeartWare Ventricular Assist System support in 141 patients: a single-centre experience.

PubMed

Wu, Long; Weng, Yu-Guo; Dong, Nian-Guo; Krabatsch, Thomas; Stepanenko, Alexander; Hennig, Ewald; Hetzer, Roland

2013-07-01

A third-generation ventricular assist device, the HeartWare Ventricular Assist System, has demonstrated its reliability and durability in animal models and clinical experience. However, studies of a large series of applications are still lacking. We evaluate the safety and efficacy of the HeartWare pump in 141 patients with end-stage heart failure at a single centre. A total of 141 patients (116 men and 25 women with a mean age of 52 years) in New York Heart Association (NYHA) Class IV received implantation of the HeartWare Ventricular Assist System between August 2009 and April 2011 at the Deutsches Herzzentrum Berlin. The outcomes were measured in terms of laboratory data, adverse events, NYHA functional class and survival during device support. The HeartWare system provided an adequate haemodynamic support for patients both inside and outside the hospital. NYHA class improved to I-II. Organ function and pulmonary vascular resistance improved significantly. In this cohort of patients, 14 patients underwent heart transplantation, one had had the device explanted following myocardial recovery, one had changed to another assist device, 81 were on ongoing support and 44 died. The overall actuarial survival rates at 6 and 12 months were 70 and 67%, respectively, and the 3-, 6- and 12-month survival rates on a left ventricular assist device (LVAD) support for bridge to transplantation patients were 82, 81 and 79%, respectively. Infection and bleeding were the main adverse events. Four patients underwent an LVAD exchange for pump thrombosis. The HeartWare system provides a safe and effective circulatory support in a population with a wide range of body surface areas, with a satisfactory actuarial survival time and an improved quality of life. It can be used for univentricular or biventricular support, being implanted into the pericardial space with simplified surgical techniques.

Tonopah Test Range Air Monitoring: CY2016 Meteorological, Radiological, and Wind Transported Particulate Observations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chapman, Jenny; Nikolich, George; Shadel, Craig

In 1963, the U.S. Department of Energy (DOE) (formerly the Atomic Energy Commission [AEC]), implemented Operation Roller Coaster on the Tonopah Test Range (TTR) and an adjacent area of the Nevada Test and Training Range (NTTR) (formerly the Nellis Air Force Range). This operation resulted in radionuclide-contaminated soils at the Clean Slate I, II, and III sites. This report documents observations made during ongoing monitoring of radiological, meteorological, and dust conditions at stations installed adjacent to Clean Slate I and Clean Slate III, and at the TTR Sandia National Laboratories (SNL) Range Operations Control (ROC) center. The primary objective ofmore » the monitoring effort is to determine if wind blowing across the Clean Slate sites is transporting particles of radionuclide-contaminated soil beyond the physical and administrative boundaries of the sites.« less

Positioning New Patterns of Privilege in Learning: A Response to Ware

ERIC Educational Resources Information Center

Paxton-Buursma, Debra J.; Mariage, Troy V.

2011-01-01

This special series represents collective courage because what is willing to be risked may be profound. At center is a willingness to reach out and cultivate new conversations on disability. Indeed, the artists who contribute to Ware's article are key co-authors; their art ushers us into a new disability literacy that extends and challenges…

On the Waring problem for polynomial rings

PubMed Central

Fröberg, Ralf; Ottaviani, Giorgio; Shapiro, Boris

2012-01-01

In this note we discuss an analog of the classical Waring problem for . Namely, we show that a general homogeneous polynomial of degree divisible by k≥2 can be represented as a sum of at most kn k-th powers of homogeneous polynomials in . Noticeably, kn coincides with the number obtained by naive dimension count. PMID:22460787

The OpenCourseWare Story: New England Roots, Global Reach

ERIC Educational Resources Information Center

Carson, Stephen

2008-01-01

The OpenCourseWare movement has its roots in New England. The concept emerged in 2000 at Massachusetts Institute of Technology (MIT) where then-President Charles Vest charged a faculty committee with answering two questions: "How is the Internet going to change education?" and "What should MIT do about it?" MIT moved quickly to…

Closure Report for Corrective Action Unit 412: Clean Slate I Plutonium Dispersion (TTR) Tonopah Test Range, Nevada, Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthews, Patrick

This Closure Report (CR) presents information supporting the clean closure of Corrective Action Unit (CAU) 412: Clean Slate I Plutonium Dispersion (TTR), located on the Tonopah Test Range, Nevada. CAU 412 consists of a release of radionuclides to the surrounding soil from a storage–transportation test conducted on May 25, 1963. Corrective action investigation (CAI) activities were performed in April and May 2015, as set forth in the Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 412: Clean Slate I Plutonium Dispersion (TTR), Tonopah Test Range, Nevada; and in accordance with the Soils Activity Quality Assurance Plan. Themore » purpose of the CAI was to fulfill data needs as defined during the data quality objectives process. The CAU 412 dataset of investigation results was evaluated based on a data quality assessment. This assessment demonstrated the dataset is complete and acceptable for use in fulfilling the data needs identified by the data quality objectives process. This CR provides documentation and justification for the clean closure of CAU 412 under the FFACO without further corrective action. This justification is based on historical knowledge of the site, previous site investigations, implementation of the 1997 interim corrective action, and the results of the CAI. The corrective action of clean closure was confirmed as appropriate for closure of CAU 412 based on achievement of the following closure objectives: Radiological contamination at the site is less than the final action level using the ground troops exposure scenario (i.e., the radiological dose is less than the final action level): Removable alpha contamination is less than the high contamination area criterion: No potential source material is present at the site, and any impacted soil associated with potential source material has been removed so that remaining soil contains contaminants at concentrations less than the final action levels: and There is sufficient information to characterize investigation and remediation waste for disposal.« less

Defense.gov - Special Report - Travels With Gates

Science.gov Websites

. If you wish to see the latest content, please visit the current version of the site. For persons with look at production of the newest all-terrain vehicles slated for Afghanistan, and praised the modern You have reached a collection of archived material. The content available is no longer being

Materials for Adaptive Structural Acoustic Control. Volume 3

DTIC Science & Technology

1994-04-11

criteria have been met for a partcular application, it then becomes advantageous to reduce costs by miniaturizing and/or reducing the power delivered...MAELSG FRintended to develop motion or vibration. such as high power COUPLING sonar, while a high g constant is desirable for sensor Histor of...which is another stable chips, which must be adjusted using solid- power and miniaturization. crystal slate in which the relative positions stale

Section candidates

NASA Astrophysics Data System (ADS)

Eos has carried biographies and photographs of candidates for President-Elect of the Union and for President-Elect and Secretary of each section. In addition, statements by the candidates for Union and Section President-Elect have appeared. T h e material for the petition candidate for President-Elect of the Solar-Planetary Relationships Section and a correction to the biography of one candidate for President-Elect of t h e Geodesy Section appear below. The material for the original slate for Solar-Planetary Relationships appeared in the August 6 issue, that for the Seismology Section in the August 13 issue, that for the Geodesy Section in the August 20 issue, that for the Atmospheric Sciences Section in the August 27 issue, that for the Hydrology Section in the September 3 issue, that for the Tectonophysics Section in the September 10 issue, that for the Volcanology, Geochemistry, and Petrology Section in the September 17 issue, that for the Planetology Section in the September 24 issue, that for the Ocean Sciences Section in the October 1 issue, that for the Geomagnetism and Paleomagnetism Section in the October 8 issue, and that for Union President-Elect in the October 15 issue. T h e slate of candidates for all offices was carried in the July 2 issue.

Material culture across the Aleutian archipelago.

PubMed

Hatfield, Virginia L

2010-12-01

The material evidence from sites across the Aleutian Islands reflects colonization events, subsequent adaptations, and influxes of ideas and/or people from the east. The occurrence in the eastern Aleutians of bifacial technology around 7000 BP, of artifacts similar to the Arctic Small Tool tradition between 4000 and 3500 BP, and of slate and jet objects around 1000 BP reflects repeated surges of influence or movement of peoples from further east into the eastern end of the chain. In the central and western Aleutians, influence or perhaps colonization from east of the Aleutians is also marked by the occurrence of bifacial technology about 6500 BP and the appearance of slate artifacts after 1000 BP, suggesting the movement of ideas or people from further east. Basic trends across the archipelago include a decrease in formal chipped-stone tools, an increase in the use and the complexity of bone technology, and the increase in use and variety of ground-stone tools. In addition, increasing village site sizes and denser midden deposits are seen later in time throughout the archipelago. The similarity in sites and assemblages, albeit with regional variations, reflects trends that are seen across the chain and indicates that these island communities were not isolated from one another or from mainland Alaska.

Geology of the Alaska-Juneau lode system, Alaska

USGS Publications Warehouse

Twenhofel, William Stephens

1952-01-01

The Alaska-Juneau lode system for many years was one of the worlds leading gold-producing areas. Total production from the years 1893 to 1946 has amounted to about 94 million dollars, with principal values in contained gold but with some silver and lead values. The principal mine is the Alaska-Juneau mine, from which the lode system takes its name. The lode system is a part of a larger gold-bearing belt, generally referred to as the Juneau gold belt, along the western border of the Coast Range batholith. The rocks of the Alaska-Juneau lode system consist of a monoclinal sequence of steeply northeasterly dipping volcanic, state, and schist rocks, all of which have been metamorphosed by dynamic and thermal processes attendant with the intrusion of the Coast Range batholith. The rocks form a series of belts that trend northwest parallel to the Coast Range. In addition to the Coast Range batholith lying a mile to the east of the lode system, there are numerous smaller intrusives, all of which are sill-like in form and are thus conformable to the regional structure. The bedded rocks are Mesozoic in age; the Coast Range batholith is Upper Jurassic and Lower Cretaceous in age. Some of the smaller intrusives pre-date the batholith, others post-date it. All of the rocks are cut by steeply dipping faults. The Alaska-Juneau lode system is confined exclusively to the footwall portion of the Perseverance slate band. The slate band is composed of black slate and black phyllite with lesser amounts of thin-bedded quartzite. Intrusive into the slate band are many sill-like bodies of rocks generally referred to as meta-gabbro. The gold deposits of the lode system are found both within the slate rocks and the meta-gabbro rocks, and particularly in those places where meta-gabbro bodies interfinger with slate. Thus the ore bodies are found in and near the terminations of meta-gabbro bodies. The ore bodies are quartz stringer-lodes composed of a great number of quartz veins from 6 inches to 3 feet wide and extending along their strike and dip for several tens to hundreds of feet. In addition to quartz, the only other vein gangue mineral is ankerite. It occurs in small amounts along the borders of the quartz veins. Metallic vein minerals, in addition to native gold, are, in order of decreasing abundance, pyrrhotite, galena, sphalerite, and arsenopyrite. In the aggregate the metallic minerals comprise only 1 to 2 percent of the total amount of vein material. The wall rock, particularly the meta-gabbro, was profoundly altered by the vein-forming processes. The principal effects on the meta-gabbro were the addition of large amounts of soda, potash, titanium, carbon dioxide, and phosphorous, and the removal of considerable quantities of iron, magnesia, lime, and combined water. Silica also may have been decreased. The mineralogical changes involved in the alteration were the development of biotite and ankerite at the expense of original hornblende and feldspar, resulting in a brown-colored biotite- and ankerite-rich rock. The slates are relatively unaffected by the vein-forming processes. Because of their small size, relatively low grade, and discontinuity, no attempt has been made to mine any individual vein. The prevailing practice has been to mine large blocks of ground by a system of modified block-caving, followed by hand sorting to remove the barren country rock from the gold-bearing quartz prior to milling.

Second Language Vocabulary Acquisition from Language Input and from Form-Focused Activities

ERIC Educational Resources Information Center

Laufer, Batia

2009-01-01

Interest in L2 vocabulary learning and teaching started long before the nineteen-eighties (for references to earlier studies, see Rob Waring's database http://www1.harenet.ne.jp/~waring/vocab/vocrefs/vocref.html) but it declined with the advent of generative linguistics to the point of discrimination and neglect (Meara 1980). In 1986, I argued…

Challenges in the Adoption and Use of OpenCourseWare: Experience of the United Nations University

ERIC Educational Resources Information Center

Barrett, Brendan F. D.; Grover, Velma I.; Janowski, Tomasz; van Lavieren, Hanneke; Ojo, Adegboyega; Schmidt, Philipp

2009-01-01

This paper provides insights on the adoption or use of OpenCourseWare (OCW) to support broader research, training and institutional capacity development goals, based on the experience of the United Nations University. Specifically, it explains the strategic context for the use of OCW in the university through its related efforts in the area of…

75 FR 11991 - ABC & D Recycling, Inc.-Lease and Operation Exemption-a Line of Railroad in Ware, MA

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-12

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [STB Finance Docket No. 35356] ABC & D Recycling, Inc.--Lease and Operation Exemption--a Line of Railroad in Ware, MA ABC & D Recycling, Inc. (ABC & D), a noncarrier, has filed a verified notice of exemption under 49 CFR 1150.31 to lease from O...

OpenCourseWare, Global Access and the Right to Education: Real Access or Marketing Ploy?

ERIC Educational Resources Information Center

Huijser, Henk; Bedford, Tas; Bull, David

2008-01-01

This paper explores the potential opportunities that OpenCourseWare (OCW) offers in providing wider access to tertiary education, based on the ideal of "the right to education." It first discusses the wider implications of OCW, and its underlying philosophy, before using a case study of a tertiary preparation program (TPP) at the…

Explaining the Paradox: Perceived Instructor Benefits and Costs of Contributing to Massachusetts Institute of Technology OpenCourseWare

ERIC Educational Resources Information Center

Parker, Preston Paul

2011-01-01

This study examines perceived benefits and costs of instructors who contributed to the Massachusetts Institute of Technology (MIT) OpenCourseWare (OCW) project. While previous research has investigated the benefits and costs of OCW from the perspectives of the users and institution, the instructor's perspective is the focus of this qualitative…

Understanding the Self-Directed Online Learning Preferences, Goals, Achievements, and Challenges of MIT OpenCourseWare Subscribers

ERIC Educational Resources Information Center

Bonk, Curtis J.; Lee, Mimi Miyoung; Kou, Xiaojing; Xu, Shuya; Sheu, Feng-Ru

2015-01-01

This research targeted the learning preferences, goals and motivations, achievements, challenges, and possibilities for life change of self-directed online learners who subscribed to the monthly OpenCourseWare (OCW) e-newsletter from MIT. Data collection included a 25-item survey of 1,429 newsletter subscribers; 613 of whom also completed an…

11 CFR 100.140 - Slate cards and sample ballots.

Code of Federal Regulations, 2010 CFR

2010-01-01

... incurred by such committee with respect to a printed slate card, sample ballot, palm card, or other printed... advertising such as billboards. But see 11 CFR 100.24, 104.17(a), and part 300, subpart B for exempt...

9. Oblique view from liftbed truck, showing deteriorated slate roof ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. Oblique view from lift-bed truck, showing deteriorated slate roof and chimney, bicycle lockers placed against southeast wall; view to north, 90mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

11 CFR 100.80 - Slate cards and sample ballots.

Code of Federal Regulations, 2010 CFR

2010-01-01

... incurred by such committee with respect to a printed slate card, sample ballot, palm card, or other printed... advertising such as billboards. But see 11 CFR 100.24, 104.17(a) and part 300, subpart B for exempt activities...

Tonopah Test Range Air Monitoring: CY2015 Meteorological, Radiological, and Airborne Particulate Observations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nikolich, George; Shadel, Craig; Chapman, Jenny

2016-09-01

In 1963, the U.S. Department of Energy (DOE) (formerly the Atomic Energy Commission [AEC]), implemented Operation Roller Coaster on the Tonopah Test Range (TTR) and an adjacent area of the Nevada Test and Training Range (NTTR) (formerly the Nellis Air Force Range). The operation resulted in radionuclide-contaminated soils at the Clean Slate I, II, and III sites. This report documents observations made during ongoing monitoring of radiological, meteorological, and dust conditions at stations installed adjacent to Clean Slate I and Clean Slate III, and at the TTR Sandia National Laboratories (SNL) Range Operations Control (ROC) center. The primary objective ofmore » the monitoring effort is to determine if winds blowing across the Clean Slate sites are transporting particles of radionuclide-contaminated soil beyond the physical and administrative boundaries of the sites. Radionuclide assessment of airborne particulates in 2015 found the gross alpha and gross beta values of dust collected from the filters at the monitoring stations are consistent with background conditions. The meteorological and particle monitoring indicate that conditions for wind-borne contaminant movement exist at the Clean Slate sites and that, although the transport of radionuclide-contaminated soil by suspension has not been detected, movement by saltation is occurring.« less

Methodology for Identifying and Quantifying Metal Pollutant Sources in Storm Water Runoff

DTIC Science & Technology

2015-02-01

sanitary sewer are not viable options. In addition, visual inspections of the drainage areas have been insufficient in identifying and quantifying the...diverting the runoff into the sanitary sewer system, but the cost could exceed millions of dollars. Instead of capturing and treating all stormwater...Unknown Appears only if Building Siding is “metal” Roof Material roof_mat_d Built Up, Metal Panel, Asphalt, Fabric, Clay , Slate, Wood, Other

Stress Related Surface Tension Effects in Hard Elastic Polymers.

DTIC Science & Technology

1982-08-19

tension 4, and viscosity and the ,_;.rain imposed csn the materials. Results indicate that these microfi-r! Slated polymers contain a substantia- surface...modulus, 2) large recoverability (up to 98%), 3) ’energetic’ elasticity, and 4) high porosity. This field was thoroughly reviewed by Cannon, McKenna, and...influenced ’N load bearing microfibrils, open to the environment. The stress sensitivity of hard elastic polymers to changes in environmental surface

Integrating Recycled Glass Cullet in Asphalt Roof Shingles to Mitigate Heat Island Effect

DTIC Science & Technology

2014-05-01

polymer, 39.3% bituminous composition, 57.5% trap rock dust stabilizer. Using recycled rubber, the formula is 3.2% elastomeric polymer, 37.2...and then rock or slag granules with similar gradation for the headlap granules. Ideal top surface materials are either igneous or metamorphic ...inherently opaque, and must be resistant to multiple heat-thaw cycles. The granules most widely used are crushed slate, basalt, and trap rock (Pagen

Investigations on mechanism of self-healing and cavity filling in case of steel inoculated with seashell powder

NASA Astrophysics Data System (ADS)

Habibullah, Parvaiz; Siddiqui, Ghazala; Saleem, Yasir

2017-05-01

Seashells are comprised largely of a brittle ceramic material (calcite, the stuff of chalk) in the form of microscopic slates. Shells, such as the abalones, reinforced with a kind of protein mortar in efforts to evaluate on how seashells repair themselves. We have identified the protein and mechanism on how the protein mortar stretches itself into ligaments that bridge the gap, with the help of scanning electron microscope (SEM).

The White Sands Test Facility

NASA Technical Reports Server (NTRS)

1994-01-01

This is an overview of the White Sands Test Facility's role in ensuring the safety and reliability of materials and hardware slated for launch aboard the Space Shuttle. Engine firings, orbital flights debris impact tests, and propulsion tests are featured as well as illustrating how they provide flight safety testing for the Johnson Space Center, other NASA centers, and various government agencies. It also contains a historical perspective and highlights of major programs that have been participated in as part of NASA.

Genotoxicity Assessment of Chlorotrifluoroethylene Trimer Acid Using a Battery of In Vitro and In Vivo/In Vitro Assays

DTIC Science & Technology

1990-12-01

in liquid nitrogen. Laboratory cultures were maintained as monolayers at 37 t 1.50C in a humidified atmosphere containing 5 t 1.5% CO2 and were... atmosphere containing 5% CO2. The cells were then washed twice with Dulbecco’s phosphate buffered saline (PBS) and incubated in F12 culture medium for six...time cell cultures ware treated with test or control material for 4 h at 37 t 1.SIA in a humidified atmosphere with 5% CO2 . After treatment, the

Fabrication of advanced electrochemical energy materials using sol-gel processing techniques

NASA Technical Reports Server (NTRS)

Chu, C. T.; Chu, Jay; Zheng, Haixing

1995-01-01

Advanced materials play an important role in electrochemical energy devices such as batteries, fuel cells, and electrochemical capacitors. They are being used as both electrodes and electrolytes. Sol-gel processing is a versatile solution technique used in fabrication of ceramic materials with tailored stoichiometry, microstructure, and properties. The application of sol-gel processing in the fabrication of advanced electrochemical energy materials will be presented. The potentials of sol-gel derived materials for electrochemical energy applications will be discussed along with some examples of successful applications. Sol-gel derived metal oxide electrode materials such as V2O5 cathodes have been demonstrated in solid-slate thin film batteries; solid electrolytes materials such as beta-alumina for advanced secondary batteries had been prepared by the sol-gel technique long time ago; and high surface area transition metal compounds for capacitive energy storage applications can also be synthesized with this method.

VIEW OF HISTORIC SLATE SWITCHBOARD IN THE CONTROL ROOM OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW OF HISTORIC SLATE SWITCHBOARD IN THE CONTROL ROOM OF THE ELWHA POWERHOUSE, INCLUDING: METERS, PROTECTIVE RELAYS, AND SWITCHES. NOTE ADDITION OF PERSONAL COMPUTERS FOR POWER METERING AND OPERATIONS. PHOTO BY JET LOWE, HAER, 1995. - Elwha River Hydroelectric System, Elwha Hydroelectric Dam & Plant, Port Angeles, Clallam County, WA

Structural profile reconstructions and thermal metamorphic evolution in the slate belt of southern Hsuehshan Range in the active Taiwan mountain belt

NASA Astrophysics Data System (ADS)

Wu, Yu; Chen, Chih-Tung; Lee, Jian-Cheng; Shyu, J. Bruce H.

2017-04-01

The fate of passive continental margin in collisional orogens is crucial in understanding tectonic evolution of mountain belts. The active arc-continent collision of Taiwan is considered as a model case in studying mountain building processes, and largely consists of deformed margin basement and cover series. Among the whole orogeny belt, the slate belt of the Hsuehshan Range (HR) is a prominent large-scale pop-up structural on the prowedge part of the orogen, and is composed of metamorphosed Eocene to Miocene sediments which experienced only the Neogene Taiwan orogeny after diagenesis in margin graben. Characterizing the metamorphic history of the HR is essential for reconstructing its geological evolution during the mountain building processes. However, previous studies were mostly focused on northern and central HR, structural investigation coupled with metamorphic documentation in the southern part of HR, which is the most active part of the orogeny belt, is therefore targeted in this work. Since carbonaceous material is common in pelitic protolith of HR slates, the Raman spectrum of carbonaceous material (RSCM) measuring the rock peak temperature is chosen for quantitative thermal metamorphic documentation. In this study, we reconstruct a geological structural profile in western central Taiwan across the prowedge part of the mountain belt containing the southern HR by combining the surface geological data, well log records and published seismic reflection profiles. Although most of the existing data are concentrated in the fold-and-thrust belt, they are now reinforced by new field structural measurements and RSCM samples in the southern HR. In total 27 RSCM samples were collected along 2 transects perpendicular to the average strike with a dense interval about 2 km. The results allow us to map peak temperature distribution across southern HR, and provide new constraints for structural profile reconstruction and reappraisal of the structural evolution of the HR and neighboring fold-and-thrust belt. As shown in the previous thermal metamorphic investigation, we expected that southern HR strata acquired highest temperature during its burial stage than the orogenic stage like their central HR counterparts, thus experiencing mostly retrograde metamorphism in the entire mountain building processes.

Saylorville Stage 3 Contract Completion Report: Testing of Priority 1 Archaeological Sites 1980-1981.

DTIC Science & Technology

1982-02-01

ware porcelain vessel fragments 26 23 3 25 1 - - Porcelain "china" doll fragments 3 3 - 3 - - Porcelain door knob A insulator fraqments 6 6 - 6...34 doll fragments 3 3 - 3 - Porcelain door knob & insulator fraqments 6 6 - 6 - Decorated & white ware ironstone vessel fragments 85 82 3 85 - Stoneware...77 - - - - Stoneware or kaolin pipe fragments 2 2 - - 2 - - - - Porcelain insulator fragment 1 1 - - I - - - - Glazed brick fraqment I I - - I

Localized soft elasticity in liquid crystal elastomers (POSTPRINT)

DTIC Science & Technology

2016-02-23

AFRL-RX-WP-JA-2016-0280 LOCALIZED SOFT ELASTICITY IN LIQUID CRYSTAL ELASTOMER (POSTPRINT) Taylor H. Ware, Andreas F. Shick, and...MM-YY) 2. REPORT TYPE 3. DATES COVERED (From - To) 11 August 2015 Interim 31 January 2014 – 11 July 2015 4. TITLE AND SUBTITLE LOCALIZED SOFT ...2016 Localized soft elasticity in liquid crystal elastomers Taylor H. Ware1,2, John S. Biggins3, Andreas F. Shick1, Mark Warner3 & Timothy J. White1

Metalorganic vapor phase epitaxy of AlN on sapphire with low etch pit density

NASA Astrophysics Data System (ADS)

Koleske, D. D.; Figiel, J. J.; Alliman, D. L.; Gunning, B. P.; Kempisty, J. M.; Creighton, J. R.; Mishima, A.; Ikenaga, K.

2017-06-01

Using metalorganic vapor phase epitaxy, methods were developed to achieve AlN films on sapphire with low etch pit density (EPD). Key to this achievement was using the same AlN growth recipe and only varying the pre-growth conditioning of the quartz-ware. After AlN growth, the quartz-ware was removed from the growth chamber and either exposed to room air or moved into the N2 purged glove box and exposed to H2O vapor. After the quartz-ware was exposed to room air or H2O, the AlN film growth was found to be more reproducible, resulting in films with (0002) and (10-12) x-ray diffraction (XRD) rocking curve linewidths of 200 and 500 arc sec, respectively, and EPDs < 100 cm-2. The EPD was found to correlate with (0002) linewidths, suggesting that the etch pits are associated with open core screw dislocations similar to GaN films. Once reproducible AlN conditions were established using the H2O pre-treatment, it was found that even small doses of trimethylaluminum (TMAl)/NH3 on the quartz-ware surfaces generated AlN films with higher EPDs. The presence of these residual TMAl/NH3-derived coatings in metalorganic vapor phase epitaxy (MOVPE) systems and their impact on the sapphire surface during heating might explain why reproducible growth of AlN on sapphire is difficult.

Why Not Charter School Boards?

ERIC Educational Resources Information Center

Schlechty, Phillip C.; Cole, Robert W.

1993-01-01

Claiming that individual school board members act in selfish ways, proposes electing entire school board as a slate. Board would collectively be held responsible for performance of the school system and all of its employees. State legislation would be required to specify how interested groups would select a slate and create a charter, which is the…

Advanced Warheads Concepts: An Advanced Equation of State for Overdriven Detonation

DTIC Science & Technology

1991-05-01

equation of state (Jones-Wilkens Lee-Baker ( JWLB )] for high explosive detonation products. JWLB is suitable for overdriven detonation and material...In order to achieve a suitable equation of state, an appropriate equation of state form ( JWLB ) was derived. A standard explosive (octol 75/25) was...resulting equation of slate form, named Jones-Wilkens-Lcc-Baker ( JWLB ), is as follows: L ’L RiVJ .RiV+AJE + C(1.W(oH-l) -RoV X-JA^VC’V + O) The

[Study on extraction technology of soyasaponins from residual of bean ware].

PubMed

Lu, Rumei; Zhang, Yizhen; Bi, Yi

2003-04-01

To find out the optimum extraction technology of soyasaponins from residual of bean ware. The optimum extraction conditions were investigated by the orthogonal design, and the content of soyasaponins was determined by UV-spectro-pho-tometry. The optimum extraction technology was A3B1C1, that is adding 7 times and 6 times amount of 70% alcohol and refluxing for two times and each time for 1.0 h. The selected technology showed higher yield of soyasaponins, good stability and high efficient.

Reporters on the Battlefield. The Embedded Press System in Historical Context

DTIC Science & Technology

2004-01-01

Jack, “Embeds and Unilaterals,” Slate, May 1, 2003. Online at http://slate.msn. com/id/2082412 (as of June 25, 2003). 65 Kurtz, Howard, “ Unembedded ...Kurtz, Howard, “Media Notes: A Battle Plan for the ’03 Campaign,” Wash- ington Post, January 20, 2003. Kurtz, Howard, “ Unembedded Journalist’s Report

31 CFR 594.513 - Transactions with entities under the control of the Palestinian President and certain other...

Code of Federal Regulations, 2011 CFR

2011-07-01

... the Palestinian Legislative Council (PLC) who were not elected to the PLC on the party slate of Hamas... authorized to reject transactions with members of the Palestinian Legislative Council (PLC) who were elected to the PLC on the party slate of Hamas or any other Foreign Terrorist Organization (FTO), Specially...

31 CFR 595.511 - Transactions with entities under the control of the Palestinian President and certain other...

Code of Federal Regulations, 2011 CFR

2011-07-01

... the Palestinian Legislative Council (PLC) who were not elected to the PLC on the party slate of Hamas... authorized to reject transactions with members of the Palestinian Legislative Council (PLC) who were elected to the PLC on the party slate of Hamas or any other Foreign Terrorist Organization (FTO), Specially...

31 CFR 594.513 - Transactions with entities under the control of the Palestinian President and certain other...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the Palestinian Legislative Council (PLC) who were not elected to the PLC on the party slate of Hamas... authorized to reject transactions with members of the Palestinian Legislative Council (PLC) who were elected to the PLC on the party slate of Hamas or any other Foreign Terrorist Organization (FTO), Specially...

31 CFR 595.511 - Transactions with entities under the control of the Palestinian President and certain other...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the Palestinian Legislative Council (PLC) who were not elected to the PLC on the party slate of Hamas... authorized to reject transactions with members of the Palestinian Legislative Council (PLC) who were elected to the PLC on the party slate of Hamas or any other Foreign Terrorist Organization (FTO), Specially...

A Review of Methods for the Manufacture of Residential Roofing Materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Akbari, Hashem; Levinson, Ronnen; Berdahl, Paul

2003-06-01

Shingles, tiles, and metal products comprise over 80% (by roof area) of the California roofing market (54-58% fiberglass shingle, 8-10% concrete tile, 8-10% clay tile, 7% metal, 3% wood shake, and 3% slate). In climates with significant demand for cooling energy, increasing roof solar reflectance reduces energy consumption in mechanically cooled buildings, and improves occupant comfort in non-conditioned buildings. This report examines methods for manufacturing fiberglass shingles, concrete tiles, clay tiles, and metal roofing. The report also discusses innovative methods for increasing the solar reflectance of these roofing materials. We have focused on these four roofing products because they aremore » typically colored with pigmented coatings or additives. A better understanding of the current practices for manufacturing colored roofing materials would allow us to develop cool colored materials creatively and more effectively.« less

Cenozoic Antarctic DiatomWare/BugCam: An aid for research and teaching

USGS Publications Warehouse

Wise, S.W.; Olney, M.; Covington, J.M.; Egerton, V.M.; Jiang, S.; Ramdeen, D.K.; ,; Schrader, H.; Sims, P.A.; Wood, A.S.; Davis, A.; Davenport, D.R.; Doepler, N.; Falcon, W.; Lopez, C.; Pressley, T.; Swedberg, O.L.; Harwood, D.M.

2007-01-01

Cenozoic Antarctic DiatomWare/BugCam© is an interactive, icon-driven digital-image database/software package that displays over 500 illustrated Cenozoic Antarctic diatom taxa along with original descriptions (including over 100 generic and 20 family-group descriptions). This digital catalog is designed primarily for use by micropaleontologists working in the field (at sea or on the Antarctic continent) where hard-copy literature resources are limited. This new package will also be useful for classroom/lab teaching as well as for any paleontologists making or refining taxonomic identifications at the microscope. The database (Cenozoic Antarctic DiatomWare) is displayed via a custom software program (BugCam) written in Visual Basic for use on PCs running Windows 95 or later operating systems. BugCam is a flexible image display program that utilizes an intuitive thumbnail “tree” structure for navigation through the database. The data are stored on Micrsosoft EXCEL spread sheets, hence no separate relational database program is necessary to run the package

The medium is NOT the message or Indefinitely long-term file storage at Leeds University

NASA Technical Reports Server (NTRS)

Holdsworth, David

1996-01-01

Approximately 3 years ago we implemented an archive file storage system which embodies experiences gained over more than 25 years of using and writing file storage systems. It is the third in-house system that we have written, and all three systems have been adopted by other institutions. This paper discusses the requirements for long-term data storage in a university environment, and describes how our present system is designed to meet these requirements indefinitely. Particular emphasis is laid on experiences from past systems, and their influence on current system design. We also look at the influence of the IEEE-MSS standard. We currently have the system operating in five UK universities. The system operates in a multi-server environment, and is currently operational with UNIX (SunOS4, Solaris2, SGI-IRIX, HP-UX), NetWare3 and NetWare4. PCs logged on to NetWare can also archive and recover files that live on their hard disks.

Characterization of newfound natural luminescent properties of melamine, and development and validation of a method of high performance liquid chromatography with fluorescence detection for its determination in kitchen plastic ware.

PubMed

Finete, Virginia de Lourdes Mendes; Gouvêa, Marcos Martins; Marques, Flávia Ferreira de Carvalho; Netto, Annibal Duarte Pereira

2014-06-01

Experimental studies of the natural photoluminescence of melamine in aqueous solutions showed that its fluorescence intensity (at 250/365 nm) was appropriated for analytical purposes. The exploitation of such melamine property provided the basis of development of a new, simple, precise and accurate method based on high performance liquid chromatography with fluorescence detection (HPLC-Fluo) to determine melamine in kitchen plastic ware following aqueous extraction using a microwave oven. Optimization of analytical parameters such as solvent composition, pH and extraction conditions led to limits of detection and quantification of melamine of 0.0081 and 0.027 μg mL(-1), respectively, with a linear range up to 10 μg mL(-1). Sample extracts fortified with melamine at three concentration levels produced an average recovery of 98±6%, which was in agreement with the results achieved with a reference HPLC-UV method. Different samples of kitchen plastic ware analyzed by the developed and optimized method showed melamine concentrations in the aqueous extract up to 17 µg mL(-1), which corresponded to 86.0 mg kg(-1) in these utensils. The results obtained indicate that the use of kitchen plastic ware made of melamine can contaminate food with this compound after heating in a microwave oven. Copyright © 2014. Published by Elsevier B.V.

Wilderness study area, mineral resources of the Sleeping Giant, Lewis and Clark County, Montana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tysdal, G.; Reynold, M.W.; Carlson, R.R.

1991-01-01

A Mineral resource survey was conducted in 1987 by the U.S. Geological Survey and the U.S. Bureau of Mines to evaluate mineral resources (known) and mineral resource potential (undiscovered) of the Sleeping Giant Wilderness Study Area (MT-075-111) in Lewis and Clark County, Montana. The only economic resource in the study area is an inferred 1.35-million-ton reserve of decorative stone (slate); a small gold placer resource is subeconomic. A high resource potential for decorative slate exists directly adjacent to the area of identified slate resource and in the northeastern part of the study area. The rest of the study area hasmore » a low potential for decorative slate. The westernmost part of the study area has a moderate resource potential for copper and associated silver in state-bound deposits in green beds and limestone; potential is low in the rest of the study are. The study area has a low resource potential for sapphires in placer deposits, gold in placer deposits (exclusive of subeconomic resource mentioned above), phosphate in the Spokane Formation, diatomite in lake deposits, uranium, oil, gas, geothermal energy, and no resource potential for phosphate in the Phosphoria Formation.« less

Geology of the Huron River pitchblende occurrence, Baraga County, Michigan

USGS Publications Warehouse

Vickers, R.C.

1955-01-01

Pitchblende and secondary uranium minerals occur as very small, discontinuous stringers and pods in calcite and quartz cementing the breccia within a low-angle shear zone that dips about 10 degrees to the southwest. The shear zone has a thickness of 10 to 30 feet and cuts black, locally carbonaceous slates of the upper Huronian Precambrian Michigamme slate. Mineral deposition during two hypogene stages and one supergene stage was identified in polished sections. The first phase consisted of the introduction of quartz and minor hematite into the sheared slate. After fracturing of the quartz the second stage was initiated by deposition of calcite, pyrite, rutile, pitchblende, bornite, sphalerite, chalcopyrite, galena, and greenockite. The supergene stage consisted of the development of metatyuyamunite, chalcopyrite, chalcocite, covellite, cuprite, volborthite, malachite, and goethite.

A preliminary report on the geology of the volcanic-rock-hosted Barite Hill gold deposit, Carolina slate belt

USGS Publications Warehouse

Clark, Sandra H.; Greig, David D.; Bryan, Norman L.

1992-01-01

Text and copies of slides for a paper presented at the meeting of the Southeastern Section of the Geological Society of America in Winston-Salem, North Carolina, March 19, 1992. The Barite Hill mine is located in the southern part of the Carolina slate belt of South Carolina just north of the Georgia border.

The Slate all metal airship

NASA Technical Reports Server (NTRS)

Slate, C. C.; Neumann, R. D.

1975-01-01

The development of the Slate all metal airship City of Glendale built and completed in 1930 is presented. The airship facilities are discussed. Pertinent data which led to other engineering accomplishments for aviation are shown. The SMD-100 concept is presented along with a brief commentary on the costs and problems involved in such an airship design and the application of the hoisting and elevator facilities to airship development.

The Beaverdam Group: Archaeological Investigations at 9EB92, 9EB207, 9EB208 and 9EB219 Richard B. Russell Multiple Resource Area, Elbert County, Georgia.

DTIC Science & Technology

1984-01-01

soapstone (steatite) for both vessels and 0 cooking stones, basin mortars, phyllite and slate knives, round or stemmed scrapers, three-quarter or full...gneissic rock, and soapstone . During sub- sequent review, it was pointed out that the use of quartzite for tool manufacture is without precedent in the...fashioned from non-local materials. Quartz, meta-igneous rock and soapstone could be found within 10 km of the Beaverdain Group, whereas other lithic

SeqWare Query Engine: storing and searching sequence data in the cloud.

PubMed

O'Connor, Brian D; Merriman, Barry; Nelson, Stanley F

2010-12-21

Since the introduction of next-generation DNA sequencers the rapid increase in sequencer throughput, and associated drop in costs, has resulted in more than a dozen human genomes being resequenced over the last few years. These efforts are merely a prelude for a future in which genome resequencing will be commonplace for both biomedical research and clinical applications. The dramatic increase in sequencer output strains all facets of computational infrastructure, especially databases and query interfaces. The advent of cloud computing, and a variety of powerful tools designed to process petascale datasets, provide a compelling solution to these ever increasing demands. In this work, we present the SeqWare Query Engine which has been created using modern cloud computing technologies and designed to support databasing information from thousands of genomes. Our backend implementation was built using the highly scalable, NoSQL HBase database from the Hadoop project. We also created a web-based frontend that provides both a programmatic and interactive query interface and integrates with widely used genome browsers and tools. Using the query engine, users can load and query variants (SNVs, indels, translocations, etc) with a rich level of annotations including coverage and functional consequences. As a proof of concept we loaded several whole genome datasets including the U87MG cell line. We also used a glioblastoma multiforme tumor/normal pair to both profile performance and provide an example of using the Hadoop MapReduce framework within the query engine. This software is open source and freely available from the SeqWare project (http://seqware.sourceforge.net). The SeqWare Query Engine provided an easy way to make the U87MG genome accessible to programmers and non-programmers alike. This enabled a faster and more open exploration of results, quicker tuning of parameters for heuristic variant calling filters, and a common data interface to simplify development of analytical tools. The range of data types supported, the ease of querying and integrating with existing tools, and the robust scalability of the underlying cloud-based technologies make SeqWare Query Engine a nature fit for storing and searching ever-growing genome sequence datasets.

SeqWare Query Engine: storing and searching sequence data in the cloud

PubMed Central

2010-01-01

Background Since the introduction of next-generation DNA sequencers the rapid increase in sequencer throughput, and associated drop in costs, has resulted in more than a dozen human genomes being resequenced over the last few years. These efforts are merely a prelude for a future in which genome resequencing will be commonplace for both biomedical research and clinical applications. The dramatic increase in sequencer output strains all facets of computational infrastructure, especially databases and query interfaces. The advent of cloud computing, and a variety of powerful tools designed to process petascale datasets, provide a compelling solution to these ever increasing demands. Results In this work, we present the SeqWare Query Engine which has been created using modern cloud computing technologies and designed to support databasing information from thousands of genomes. Our backend implementation was built using the highly scalable, NoSQL HBase database from the Hadoop project. We also created a web-based frontend that provides both a programmatic and interactive query interface and integrates with widely used genome browsers and tools. Using the query engine, users can load and query variants (SNVs, indels, translocations, etc) with a rich level of annotations including coverage and functional consequences. As a proof of concept we loaded several whole genome datasets including the U87MG cell line. We also used a glioblastoma multiforme tumor/normal pair to both profile performance and provide an example of using the Hadoop MapReduce framework within the query engine. This software is open source and freely available from the SeqWare project (http://seqware.sourceforge.net). Conclusions The SeqWare Query Engine provided an easy way to make the U87MG genome accessible to programmers and non-programmers alike. This enabled a faster and more open exploration of results, quicker tuning of parameters for heuristic variant calling filters, and a common data interface to simplify development of analytical tools. The range of data types supported, the ease of querying and integrating with existing tools, and the robust scalability of the underlying cloud-based technologies make SeqWare Query Engine a nature fit for storing and searching ever-growing genome sequence datasets. PMID:21210981

First insights into macro- and meiofaunal colonisation patterns on paired wood/slate substrata at Atlantic deep-sea hydrothermal vents

NASA Astrophysics Data System (ADS)

Cuvelier, Daphne; Beesau, Julie; Ivanenko, Viatcheslav N.; Zeppilli, Daniela; Sarradin, Pierre-Marie; Sarrazin, Jozée

2014-05-01

In 2006, paired wood and slate panels, each equipped with a temperature probe, were deployed on three different localities on and around the Eiffel Tower edifice (Lucky Strike vent field, Mid-Atlantic Ridge) within close proximity of visible hydrothermal activity. Recovery of these panels took place in 2008. For this two-year deployment period, the composition of colonising organisms (both macro-and meiofauna) was assessed, along with image analyses of the deployment sites in 2006 and 2008. Very few significant differences in colonisation between organic (wood) and inorganic (slate) panels were revealed. Rather, the locality of deployment and the local environmental conditions and hydrothermal activity were found to influence taxonomic composition. Variability in microhabitat conditions and biological interactions were hypothesised to interact jointly in shaping new faunal communities on the colonisation substrata.

Children's agenda-based regulation: The effects of prior performance and reward on elementary school children's study choices.

PubMed

Lipowski, Stacy; Ariel, Robert; Tauber, Sarah K; Dunlosky, John

2017-12-01

The main goal of the current experiments was to examine the influence of monitoring and reward on elementary school children's study decisions. First and third graders studied names for 10 animals (e.g., "The elephant's name is Suzy") and then were given a cued recall test on which they were shown the animal and needed to recall the name. Next, they were given an opportunity to restudy the animal-name pairs, and some of these pairs were slated to earn a reward (a sticker) if correctly recalled. In Experiment 1, both groups of children were (a) more likely to restudy previously unrecalled pairs than previously recalled pairs and (b) more likely to restudy pairs that were slated to receive a reward. In Experiment 2, we further explored children's use of reward using a forced-choice selection task. Namely, during selection, pairs were presented in dyads where one pair was slated for a reward and the other pair was not, and the children could choose only one pair from each dyad for restudy. Both first and third graders chose to restudy pairs slated for a reward. Thus, even young elementary school children consider both rewards and performance monitoring when regulating their learning. Copyright © 2017 Elsevier Inc. All rights reserved.

Learning from the past: Rare ε-Fe2O3 in the ancient black-glazed Jian (Tenmoku) wares

PubMed Central

Dejoie, Catherine; Sciau, Philippe; Li, Weidong; Noé, Laure; Mehta, Apurva; Chen, Kai; Luo, Hongjie; Kunz, Martin; Tamura, Nobumichi; Liu, Zhi

2014-01-01

Ancient Jian wares are famous for their lustrous black glaze that exhibits unique colored patterns. Some striking examples include the brownish colored “Hare's Fur” (HF) strips and the silvery “Oil Spot” (OS) patterns. Herein, we investigated the glaze surface of HF and OS samples using a variety of characterization methods. Contrary to the commonly accepted theory, we identified the presence of ε-Fe2O3, a rare metastable polymorph of Fe2O3 with unique magnetic properties, in both HF and OS samples. We found that surface crystals of OS samples are up to several micrometers in size and exclusively made of ε-Fe2O3. Interestingly, these ε-Fe2O3 crystals on the OS sample surface are organized in a periodic two dimensional fashion. These results shed new lights on the actual mechanisms and kinetics of polymorphous transitions of Fe2O3. Deciphering technologies behind the fabrication of ancient Jian wares can thus potentially help researchers improve the ε-Fe2O3 synthesis. PMID:24820819

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

Operations of Sandia National Laboratories, Nevada (SNL/NV) at the Tonopah Test Range (TTR) resulted in no planned point radiological releases during 1996. Other releases from SNL/NV included diffuse transuranic sources consisting of the three Clean Slate sites. Air emissions from these sources result from wind resuspension of near-surface transuranic contaminated soil particulates. The total area of contamination has been estimated to exceed 20 million square meters. Soil contamination was documented in an aerial survey program in 1977 (EG&G 1979). Surface contamination levels were generally found to be below 400 pCi/g of combined plutonium-238, plutonium-239, plutonium-240, and americium-241 (i.e., transuranic) activity.more » Hot spot areas contain up to 43,000 pCi/g of transuranic activity. Recent measurements confirm the presence of significant levels of transuranic activity in the surface soil. An annual diffuse source term of 0.39 Ci of transuranic material was calculated for the cumulative release from all three Clean Slate sites. A maximally exposed individual dose of 1.1 mrem/yr at the TTR airport area was estimated based on the 1996 diffuse source release amounts and site-specific meteorological data. A population dose of 0.86 person-rem/yr was calculated for the local residents. Both dose values were attributable to inhalation of transuranic contaminated dust.« less

Minimally Invasive Implantation of HeartWare Assist Device and Simultaneous Tricuspid Valve Reconstruction Through Partial Upper Sternotomy.

PubMed

Hillebrand, Julia; Hoffmeier, Andreas; Djie Tiong Tjan, Tonny; Sindermann, Juergen R; Schmidt, Christoph; Martens, Sven; Scherer, Mirela

2017-05-01

Left ventricular assist device (LVAD) implantation is a well-established therapy to support patients with end-stage heart failure. However, the operative procedure is associated with severe trauma. Third generation LVADs like the HeartWare assist device (HeartWare, Inc., Framingham, MA, USA) are characterized by enhanced technology despite smaller size. These devices offer new minimally invasive surgical options. Tricuspid regurgitation requiring valve repair is frequent in patients with the need for mechanical circulatory support as it is strongly associated with ischemic and nonischemic cardiomyopathy. We report on HeartWare LVAD implantation and simultaneous tricuspid valve reconstruction through minimally invasive access by partial upper sternotomy to the fifth left intercostal space. Four male patients (mean age 51.72 ± 11.95 years) suffering from chronic heart failure due to dilative (three patients) and ischemic (one patient) cardiomyopathy and also exhibiting concomitant tricuspid valve insufficiency due to annular dilation underwent VAD implantation and tricuspid valve annuloplasty. Extracorporeal circulation was established via the ascending aorta, superior vena cava, and right atrium. In all four cases the LVAD implantation and tricuspid valve repair via partial median sternotomy was successful. During the operative procedure, no conversion to full sternotomy was necessary. One patient needed postoperative re-exploration because of pericardial effusion. No postoperative focal neurologic injury was observed. New generation VADs are advantageous because of the possibility of minimally invasive implantation procedure which can therefore minimize surgical trauma. Concomitant tricuspid valve reconstruction can also be performed simultaneously through partial upper sternotomy. Nevertheless, minimally invasive LVAD implantation is a challenging operative technique. © 2016 International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

Fluid evolution during burial and Variscan deformation in the Lower Devonian rocks of the High-Ardenne slate belt (Belgium): sources and causes of high-salinity and C-O-H-N fluids

NASA Astrophysics Data System (ADS)

Kenis, I.; Muchez, Ph.; Verhaert, G.; Boyce, A.; Sintubin, M.

2005-08-01

Fluid inclusions in quartz veins of the High-Ardenne slate belt have preserved remnants of prograde and retrograde metamorphic fluids. These fluids were examined by petrography, microthermometry and Raman analysis to define the chemical and spatial evolution of the fluids that circulated through the metamorphic area of the High-Ardenne slate belt. The earliest fluid type was a mixed aqueous/gaseous fluid (H2O-NaCl-CO2-(CH4-N2)) occurring in growth zones and as isolated fluid inclusions in both the epizonal and anchizonal part of the metamorphic area. In the central part of the metamorphic area (epizone), in addition to this mixed aqueous/gaseous fluid, primary and isolated fluid inclusions are also filled with a purely gaseous fluid (CO2-N2-CH4). During the Variscan orogeny, the chemical composition of gaseous fluids circulating through the Lower Devonian rocks in the epizonal part of the slate belt, evolved from an earlier CO2-CH4-N2 composition to a later composition enriched in N2. Finally, a late, Variscan aqueous fluid system with a H2O-NaCl composition migrated through the Lower Devonian rocks. This latest type of fluid can be observed in and outside the epizonal metamorphic part of the High-Ardenne slate belt. The chemical composition of the fluids throughout the metamorphic area, shows a direct correlation with the metamorphic grade of the host rock. In general, the proportion of non-polar species (i.e. CO2, CH4, N2) with respect to water and the proportion of non-polar species other than CO2 increase with increasing metamorphic grade within the slate belt. In addition to this spatial evolution of the fluids, the temporal evolution of the gaseous fluids is indicative for a gradual maturation due to metamorphism in the central part of the basin. In addition to the maturity of the metamorphic fluids, the salinity of the aqueous fluids also shows a link with the metamorphic grade of the host-rock. For the earliest and latest fluid inclusions in the anchizonal part of the High-Ardenne slate belt the salinity varies respectively between 0 and 3.5 eq.wt% NaCl and between 0 and 2.7 eq.wt% NaCl, while in the epizonal part the salinity varies between 0.6 and 17 eq.wt% NaCl and between 3 and 10.6 eq.wt% for the earliest and latest aqueous fluid inclusions, respectively. Although high salinity fluids are often attributed to the original sedimentary setting, the increasing salinity of the fluids that circulated through the Lower Devonian rocks in the High-Ardenne slate belt can be directly attributed to regional metamorphism. More specifically the salinity of the primary fluid inclusions is related to hydrolysis reactions of Cl-bearing minerals during prograde metamorphism, while the salinity of the secondary fluid inclusions is rather related to hydration reactions during retrograde metamorphism. The temporal and spatial distribution of the fluids in the High-Ardenne slate belt are indicative for a closed fluid flow system present in the Lower Devonian rocks during burial and Variscan deformation, where fluids were in thermal and chemical equilibrium with the host rock. Such a closed fluid flow system is confirmed by stable isotope study of the veins and their adjacent host rock for which uniform δ180 values of both the veins and their host rock demonstrate a rock-buffered fluid flow system.

The use of mixed pyrrhotite/pyrite catalysts for co-liquefaction of coal and waste rubber tires

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dadyburjor, D.B.; Zondlo, J.W.; Sharma, R.K.

1995-12-31

The overall objective of this research program is to determine the optimum processing conditions for tire/coal co-liquefaction. The catalysts used will be a ferric-sulfide-based materials, as well as promising catalysts from other consortium laboratories. The intent here is to achieve the maximum coal+tire conversion at the mildest conditions of temperature and pressure. Specific objectives include an investigation of the effects of time, temperature, pressure, catalyst and co-solvent on the conversion and product slate of the co-liquefaction. Accomplishments and conclusions are discussed.

An Overview of the Jupiter Icy Moons Orbiter (JIMO) Mission, Environments, and Materials Challenges

NASA Technical Reports Server (NTRS)

Edwards, Dave

2012-01-01

Congress authorized NASA's Prometheus Project in February 2003, with the first Prometheus mission slated to explore the icy moons of Jupiter with the following main objectives: (1) Develop a nuclear reactor that would provide unprecedented levels of power and show that it could be processed safely and operated reliably in space for long-duration. (2) Explore the three icy moons of Jupiter -- Callisto, Ganymede, and Europa -- and return science data that would meet the scientific goals as set forth in the Decadal Survey Report of the National Academy of Sciences.

Mapping contact metamorphic aureoles in Extremadura, Spain, using Landsat thematic mapper images

USGS Publications Warehouse

Rowan, L.C.; Anton-Pacheco, C.; Brickey, D.W.; Kingston, M.J.; Payas, A.

1987-01-01

In the Extremadura region of western Spain, Ag, Pb, Zn, and Sn deposits occur in the pieces of late Hercynian granitic plutons and near the pluton contacts in late Proterozoic slate and metagraywacke that have been regionally metamorphosed to the green schist facies. The plutons generally are well exposed and have distinctive geomorphological expression and vegetation; poor exposures of the metasedimentary host rocks and extensive cultivation, however, make delineation of the contact aureoles difficult. Landsat Thematic Mapper (TM) images have been used to distinguish soil developed on the contact metamorphic rocks from soil formed on the stratigraphically equivalent slate-metagraywacke sequence. The mineral constituents of these soils are similar, except that muscovite is more common in the contact metamorphic soil; carbonaceous material is common in both soils. Contact metamorphic soil have lower reflectance, especially in the 1.6-micrometers wavelength region (TM 5), and weaker Al-OH, Mg-OH, and Fe3+ absorption features than do spectra of the slate-metagraywacke soil. The low-reflectance and subdued absorption features exhibited by the contact metamorphic soil spectra are attributed to the high absorption coefficient f the carbonaceous material caused by heating during emplacement of the granitic plutons. These spectral differences are evident in a TM 4/3, 4/5, 3/1 color-composite image. Initially, this image was used to outline the contact aureoles, but digital classification of the TM data was necessary for generating internally consistent maps of the distribution of the exposed contact metamorphic soil. In an August 1984, TM scene of the Caceras area, the plowed, vegetation-free fields were identified by their low TM 4/3 values. Then, ranges of TM 4/5 and 3/1 values were determine for selected plower fields within and outside the contact aureoles; TM 5 produced results similar to TM 4/5. Field evaluation, supported by X-ray diffraction and petrographic studies, confirmed the presence of more extensive aureoles than shown in published geologic maps; few misclassified areas were noted. Additional plowed fields consisting of exposed contact metamorphic soil were mapped digitally in an August 1985 TM scene. Subsequently, this approach was used to map two 1-km-wide linear zones of contact metamorphosed rock and oil in the San Nicolas-Sn-W Mine area, which is located approximated 125 km southeast of the Caceras study area. Exposures of granite in the San Nicolas area are limited to a few unaltered granitic dikes in the mine and a small exposure of unaltered pegmatite-bearing granite in a quarry about 1.5 km west of the mine. The present of coarsely crystalline biotite and beryl in the granite in the quarry and of contact metamorphosed slate up to 2.5 km from the nearest granite exposure suggest that only the apical part of a pluton is exposed in the quarry and that a larger, shallowly buried body is probably present. These results indicate that potential application of TM image analysis to mineral exploration in lithologically similar areas that are cultivated in spite of poor rock exposures.

Predicting the mortality from asbestos-related diseases based on the amount of asbestos used and the effects of slate buildings in Korea.

PubMed

Kim, Su-Young; Kim, Young-Chan; Kim, Yongku; Hong, Won-Hwa

2016-01-15

Asbestos has been used since ancient times, owing to its heat-resistant, rot-proof, and insulating qualities, and its usage rapidly increased after the industrial revolution. In Korea, all slates were previously manufactured in a mixture of about 90% cement and 10% chrysotile (white asbestos). This study used a Generalized Poisson regression (GPR) model after creating databases of the mortality from asbestos-related diseases and of the amount of asbestos used in Korea as a means to predict the future mortality of asbestos-related diseases and mesothelioma in Korea. Moreover, to predict the future mortality according to the effects of slate buildings, a comparative analysis based on the result of the GPR model was conducted after creating databases of the amount of asbestos used in Korea and of the amount of asbestos used in making slates. We predicted the mortality from asbestos-related diseases by year, from 2014 to 2036, according to the amount of asbestos used. As a result, it was predicted that a total of 1942 people (maximum, 3476) will die by 2036. Moreover, based on the comparative analysis according to the influence index, it was predicted that a maximum of 555 people will die from asbestos-related diseases by 2031 as a result of the effects of asbestos-containing slate buildings, and the mortality was predicted to peak in 2021, with 53 cases. Although mesothelioma and pulmonary asbestosis were considered as asbestos-related diseases, these are not the only two diseases caused by asbestos. However the results of this study are highly important and relevant, as, for the first time in Korea, the future mortality from asbestos-related diseases was predicted. These findings are expected to contribute greatly to the Korean government's policies related to the compensation for asbestos victims. Copyright © 2015 Elsevier B.V. All rights reserved.

Northward extension of Carolina slate belt stratigraphy and structure, South-Central Virginia: Results from geologic mapping

USGS Publications Warehouse

Hackley, P.C.; Peper, J.D.; Burton, W.C.; Horton, J. Wright

2007-01-01

Geologic mapping in south-central Virginia demonstrates that the stratigraphy and structure of the Carolina slate belt extend northward across a steep thermal gradient into upper amphibolite-facies correlative gneiss and schist. The Neoproterozoic greenschist-facies Hyco, Aaron, and Virgilina Formations were traced northward from their type localities near Virgilina, Virginia, along a simple, upright, northeast-trending isoclinal syncline. This syncline is called the Dryburg syncline and is a northern extension of the more complex Virgilina synclinorium. Progressively higher-grade equivalents of the Hyco and Aaron Formations were mapped northward along the axial trace of the refolded and westwardly-overturned Dryburg syncline through the Keysville and Green Bay 7.5-minute quadrangles, and across the northern end of the Carolina slate belt as interpreted on previous geologic maps. Hyco rocks, including felsic metatuff, metawacke, and amphibolite, become gneisses upgrade with areas of local anatexis and the segregation of granitic melt into leucosomes with biotite selvages. Phyllite of the Aaron Formation becomes garnet-bearing mica schist. Aaron Formation rocks disconformably overlie the primarily felsic volcanic and volcaniclastic rocks of the Hyco Formation as evidenced by repeated truncation of internal contacts within the Hyco on both limbs of the Dryburg syncline at the Aaron-Hyco contact. East-northeast-trending isograds, defined successively by the first appearance of garnet, then kyanite ?? staurolite in sufficiently aluminous rocks, are superposed on the stratigraphic units and synclinal structure at moderate to high angles to strike. The textural distinction between gneisses and identifiable sedimentary structures occurs near the kyanite ?? staurolite-in isograd. Development of the steep thermal gradient and regional penetrative fabric is interpreted to result from emplacement of the Goochland terrane adjacent to the northern end of the slate belt during Alleghanian orogenesis. This mapping study indicates that the Carolina slate belt does not terminate on the north against through-going faults or rest on higher-grade basement as previously suggested.

Simplified greywater treatment systems: Slow filters of sand and slate waste followed by granular activated carbon.

PubMed

Zipf, Mariah Siebert; Pinheiro, Ivone Gohr; Conegero, Mariana Garcia

2016-07-01

One of the main actions of sustainability that is applicable to residential, commercial, and public buildings is the rational use of water that contemplates the reuse of greywater as one of the main options for reducing the consumption of drinking water. Therefore, this research aimed to study the efficiencies of simplified treatments for greywater reuse using slow sand and slow slate waste filtration, both followed by granular activated carbon filters. The system monitoring was conducted over 28 weeks, using analyses of the following parameters: pH, turbidity, apparent color, biochemical oxygen demand (BOD), chemical oxygen demand (COD), surfactants, total coliforms, and thermotolerant coliforms. The system was run at two different filtration rates: 6 and 2 m(3)/m(2)/day. Statistical analyses showed no significant differences in the majority of the results when filtration rate changed from 6 to 2 m(3)/m(2)/day. The average removal efficiencies with regard to the turbidity, apparent color, COD and BOD were 61, 54, 56, and 56%, respectively, for the sand filter, and 66, 61, 60, and 51%, respectively, for the slate waste filter. Both systems showed good efficiencies in removing surfactants, around 70%, while the pH reached values of around 7.80. The average removal efficiencies of the total and thermotolerant coliforms were of 61 and 90%, respectively, for the sand filter, and 67 and 80%, respectively, for the slate waste filter. The statistical analysis found no significant differences between the responses of the two systems, which attest to the fact that the slate waste can be a substitute for sand. The maximum levels of efficiency were high, indicating the potential of the systems, and suggesting their optimization in order to achieve much higher average efficiencies. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Antimony and other heavy metals in metallic kitchen ware].

PubMed

Ishiwata, H; Sugita, T; Yoshihira, K

1989-01-01

The antimony in metallic kitchen ware was determined. The content of this element in metals used for the production or repairing of utensils, containers and packaging which come in contact with foods is regulated and should be less than 5% in under the Japanese Food Sanitation Law. In eight metallic samples, antimony was detected in solder used for the production of a can for green tea and an eggbeater. The contents were 1.30% in the former and 1.90% in the latter. No antimony was detected in solder used for a cookie cutter. A sample of solder used for electric work, not for food utensils, contained 0.81% of antimony. In other metallic utensils which come in contact with food such as aluminum foil, a brass spoon, a stainless steel fork, a wire netting, and an iron rock for vegetable color stabilizing, antimony was not detected at a 0.05% detection limit. A qualitative test using rhodamine B also showed positive results in only three solder samples. Lead concentrations in solder used for the kitchen ware were from 39.3 to 51.3%. These concentrations were higher than the limit (20%) of lead content by the Law. No cadmium was detected in any samples.

Provenance analysis of the Pliocene Ware Formation in the Guajira Peninsula, northern Colombia: Paleodrainage implications

NASA Astrophysics Data System (ADS)

Pérez-Consuegra, Nicolás; Parra, Mauricio; Jaramillo, Carlos; Silvestro, Daniele; Echeverri, Sebastián; Montes, Camilo; Jaramillo, José María; Escobar, Jaime

2018-01-01

The Cocinetas Basin in the Guajira Peninsula, the northernmost tip of South America, today has a dry climate with low rainfall (<500 mm/yr), a long dry season (>ten months) and no year-long rivers or permanent standing bodies of fresh water. In contrast, the fossil and geological record indicate that the Cocinetas Basin was much wetter during the Miocene-Pliocene (∼17-2.8 Ma). Water needed to sustain the paleofauna could either have originated from local sources or been brought by a larger river system (e.g. proto Magdalena/Orinoco river) with headwaters either in Andean ranges or the Guyana shield. We present a provenance study of the Pliocene Ware Formation, using petrographic analysis of conglomerate clasts and heavy minerals, and U-Pb dating of 140 detrital zircons. Clasts and heavy minerals are typical of ensialic metamorphic and igneous sources. The detrital zircon age distribution indicates the Guajira ranges as the most probable sediment source. The overall results indicate that the fluvial system of the Ware Formation drained the surrounding ranges. The water was probably derived by local precipitation onto the Guajira peninsula.

Wasting Time: Black Participation in the Combat Arms Branches

DTIC Science & Technology

2009-04-15

thirty years only two of the nine Black men selected to command Army Divisions have been slated to do so in CONUS. Young Black men and women can...Divisions have been slated to do so in CONUS. Young Black men and women can derive inspiration in pursuit of a given vocation, by seeing someone of their...Strategic Leaders, COL (ret) James E. Gordon, USWAC Class of 1996, (5 April 1996).  Mentoring Women and Minority officers in the US Military, Major Darrell

[Dust concentration analysis in non-coal mining. Exposure evaluation based on measurements performed by occupational hygiene laboratories in the years 2001-2005 in Poland].

PubMed

Bujak-Pietrek, Stella; Mikołajczyk, Urszula; Szadkowska-Stańczyk, Irena

2011-01-01

Non-coal mining includes the extraction of materials for construction (stone, gravel, sand and clay), chemical industry (salt and sulfur), metallurgy (metal ores, uranium and thorium) and other mining and quarrying. Regardless of the type of mining company one of the most common health hazards in this sector is exposure to high concentrations of dust occurring during the extraction of materials. Such activities as drilling, use of blasting agents, processing of raw material, its transportation and loading are the source of large amounts of dust containing crystalline silica. Data on exposure to dust, collected by industrial hygiene laboratories on the basis of dust concentration measurements in the work environment, were obtained from the sanitary inspection service. The analysis of dust concentrations at workplaces in non-coal mining covered the years 2001-2005. The average concentration of inhalable and respirable dust and the degree of results dispersion at workposts in different branches of non-coal mining (according to NACE rev1.1) were evaluated. Also there was estimated the percentage of surveys indicating dust concentrations above hygiene standards. Almost 5000 measurements of dust concentrations were performed in the years under study. The highest concentration of inhalable dust was noted for the production of salt (5.51 mg/m3), other mining and quarrying (4.30 mg/m3) and quarrying of slate (3.77 mg/m3). For respirable dust the highest concentrations were noted in other mining and quarrying (1.10 mg/m3), quarrying of slate (1.09 mg/m3) and quarrying of stone (0.81 mg/m3). Exposure to high concentrations of dust during the extraction of non-carbon is still an important hazard to human health. Almost for all workposts under study the excess of hygiene standards were observed.

Enabling propulsion materials for high-speed civil transport engines

NASA Technical Reports Server (NTRS)

Stephens, Joseph R.; Herbell, Thomas P.

1992-01-01

NASA Headquarters and LeRC have advocated an Enabling Propulsion Materials Program (EPM) to begin in FY-92. The High Speed Research Phase 1 program which began in FY-90 has focused on the environmental acceptability of a High Speed Civil Transport (HSCT). Studies by industry, including Boeing, McDonnell Douglas, GE Aircraft Engines, and Pratt & Whitney Aircraft, and in-house studies by NASA concluded that NO(x) emissions and airport noise reduction can only be economically achieved by revolutionary advancements in materials technologies. This is especially true of materials for the propulsion system where the combustor is the key to maintaining low emissions, and the exhaust nozzle is the key to reducing airport noise to an acceptable level. Both of these components will rely on high temperature composite materials that can withstand the conditions imposed by commercial aircraft operations. The proposed EPM program will operate in conjunction with the HSR Phase 1 Program and the planned HSR Phase 2 program slated to start in FY-93. Components and subcomponents developed from advanced materials will be evaluated in the HSR Phase 2 Program.

Source Recertification, Refurbishment, and Transfer Logistics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gastelum, Zoe N.; Duckworth, Leesa L.; Greenfield, Bryce A.

2013-09-01

The 2012 Gap Analysis of Department of Energy Radiological Sealed Sources, Standards, and Materials for Safeguards Technology Development [1] report, and the subsequent Reconciliation of Source Needs and Surpluses across the U.S. Department of Energy National Laboratory Complex [2] report, resulted in the identification of 33 requests for nuclear or radiological sealed sources for which there was potentially available, suitable material from within the U.S. Department of Energy (DOE) complex to fill the source need. Available, suitable material was defined by DOE laboratories as material slated for excess, or that required recertification or refurbishment before being used for safeguards technologymore » development. This report begins by outlining the logistical considerations required for the shipment of nuclear and radiological materials between DOE laboratories. Then, because of the limited need for transfer of matching sources, the report also offers considerations for an alternative approach – the shipment of safeguards equipment between DOE laboratories or technology testing centers. Finally, this report addresses repackaging needs for the two source requests for which there was available, suitable material within the DOE complex.« less

Pyrogen tests of infusions, blood anticoagulant solutions, plastic materials and rubber products.

PubMed

Pintér, J; Zsdánszky, C; Györffy, G

1977-01-01

The methods of the pyrogen test in rabbit as adopted by the authors are presented. The test includes positive and negative controls. The conditions of using the same rabbits on two consecutive days are discussed. Methods of sampling of sterile infusions and the preparation for pyrogen test of anticoagulant solutions containing citrate, phosphate and/or edetate ions are presented. The necessity of pyrogen control of distilled water is stressed. Attention is called on the importance of testing for pyrogenicity of the plastic materials and the rubber-wares to be applied during the production of anticoagulant solutions and infusions. A pyrogen test highly sensitive for detecting traces of detergent is applied for washed glassware. It is emphasized that sensitive pyrogen tests are indispensable not only when new derivatives are being introduced, but also during routine control, because occasional changes in the manufacturer's technology may sometimes be demonstrable in this way.

Potential of Sr isotopic analysis in ceramic provenance studies: Characterisation of Chinese stonewares

NASA Astrophysics Data System (ADS)

Li, Bao-Ping; Zhao, Jian-Xin; Greig, Alan; Collerson, Kenneth D.; Zhuo, Zhen-Xi; Feng, Yue-Xin

2005-11-01

We compare the trace element and Sr isotopic compositions of stoneware bodies made in Yaozhou and Jizhou to characterise these Chinese archaeological ceramics and examine the potential of Sr isotopes in provenance studies. Element concentrations determined by ICP-MS achieve distinct characterisation for Jizhou samples due to their restricted variation, yet had limited success with Yaozhou wares because of their large variability. In contrast, 87Sr/86Sr ratios in Yaozhou samples have a very small variation and are all significantly lower than those of Jizhou samples, which show a large variation and cannot be well characterised with Sr isotopes. Geochemical interpretation reveals that 87Sr/86Sr ratios will have greater potential to characterise ceramics made of low Rb/Sr materials such as kaolin clay, yet will show larger variations in ceramics made of high Rb/Sr materials such as porcelain stone.

Effects of Changing pH, Incubation Time, and As(V) Competition, on F- Retention on Soils, Natural Adsorbents, By-Products, and Waste Materials.

PubMed

Quintáns-Fondo, Ana; Santás-Miguel, Vanesa; Nóvoa-Muñoz, Juan C; Arias-Estévez, Manuel; Fernández-Sanjurjo, María J; Álvarez-Rodríguez, Esperanza; Núñez-Delgado, Avelino

2018-01-01

The purpose of this work was to elucidate the repercussion of changing pH, incubation time and As(V) competition on fluoride (F - ) sorption on forest and vineyard soil samples, pyritic, and granitic materials, as well as on the by-products pine sawdust, oak wood ash, mussel shell ash, fine and coarse mussel shell, and slate processing waste fines. To reach this end, the methodological approach was based on batch-type experiments. The results indicate that, for most materials, F - sorption was very high at the start, but was clearly diminished when the pH value increased. However, oak wood ash and shell ash showed high F - sorption even at alkaline pH, and pine sawdust showed low F - sorption for any pH value. Specifically, F - sorption was close to 100% for both ashes at pH < 6, and around 70% at pH 10, while for forest soil it was close to 90% at pH < 2, and around 60% at pH values near 8. Regarding the effect of incubation time on F - sorption, it was very low for both soils, pyritic material, granitic material, and both kinds of ashes, as all of them showed very rapid F - sorption from the start, with differences being lesser than 10% between sorption at 30 min and 1 month of incubation. However, sawdust and slate fines sorbed 20% of added F - in 30 min, remaining constant up to 12 h, and doubling after 30 days. And finally, mussel shell sorbed 20% at 30 min, increasing to close to 60% when incubation time was 30 days. This means that some of the materials showed a first sorption phase characterized by rapid F - sorption, and a slower sorption in a second phase. As regards the effect of the presence of As(V) on F - sorption, it was almost negligible, indicating the absence of competition for sorption sites. In view of that all, these results could aid to appropriately manage soils and by-products when focusing on F - removal, in circumstances where pH value changes, contact time vary from hours to days, and potential competition between F - and As(V) could take place.

Effects of changing pH, incubation time, and As(V) competition, on F- retention on soils, natural adsorbents, by-products, and waste materials

NASA Astrophysics Data System (ADS)

Quintáns-Fondo, Ana; Santás-Miguel, Vanesa; Nóvoa-Muñoz, Juan C.; Arias-Estévez, Manuel; Fernández-Sanjurjo, María J.; Álvarez-Rodríguez, Esperanza; Núñez-Delgado, Avelino

2018-03-01

The purpose of this work was to elucidate the repercussion of changing pH, incubation time and As(V) competition on fluoride (F-) sorption on forest and vineyard soil samples, pyritic and granitic materials, as well as on the by-products pine sawdust, oak wood ash, mussel shell ash, fine and coarse mussel shell, and slate processing waste fines. To reach this end, the methodological approach was based on batch-type experiments. The results indicate that, for most materials, F- sorption was very high at the start, but was clearly diminished when the pH value increased. However, oak wood ash and shell ash showed high F- sorption even at alkaline pH, and pine sawdust showed low F- sorption for any pH value. Specifically, F- sorption was close to 100% for both ashes at pH <6, and around 70% at pH 10, while for forest soil it was close to 90% at pH <2, and around 60% at pH values near 8. Regarding the effect of incubation time on F- sorption, it was very low for both soils, pyritic material, granitic material and both kinds of ashes, as all of them showed very rapid F- sorption from the start, with differences being lesser than 10% between sorption at 30 min and 1 month of incubation. However, sawdust and slate fines sorbed 20% of added F- in 30 minutes, remaining constant up to twelve hours, and doubling after 30 days. And finally, mussel shell sorbed 20% at 30 minutes, increasing to close to 60% when incubation time was 30 days. This means that some of the materials showed a first sorption phase characterized by rapid F- sorption, and a slower sorption in a second phase. As regards the effect of the presence of As(V) on F- sorption, it was almost negligible, indicating the absence of competition for sorption sites. In view of that all, these results could aid to appropriately manage soils and by-products when focusing on F- removal, in circumstances where pH value changes, contact time vary from hours to days, and potential competition between F- and As(V) could take place.

Painting with polygons: a procedural watercolor engine.

PubMed

DiVerdi, Stephen; Krishnaswamy, Aravind; Měch, Radomír; Ito, Daichi

2013-05-01

Existing natural media painting simulations have produced high-quality results, but have required powerful compute hardware and have been limited to screen resolutions. Digital artists would like to be able to use watercolor-like painting tools, but at print resolutions and on lower end hardware such as laptops or even slates. We present a procedural algorithm for generating watercolor-like dynamic paint behaviors in a lightweight manner. Our goal is not to exactly duplicate watercolor painting, but to create a range of dynamic behaviors that allow users to achieve a similar style of process and result, while at the same time having a unique character of its own. Our stroke representation is vector based, allowing for rendering at arbitrary resolutions, and our procedural pigment advection algorithm is fast enough to support painting on slate devices. We demonstrate our technique in a commercially available slate application used by professional artists. Finally, we present a detailed analysis of the different vector-rendering technologies available.

Shock attenuation at the Slate Islands revisited

NASA Technical Reports Server (NTRS)

Wu, S.; Robertson, P. B.; Grieve, R. A. F.

1993-01-01

This study of a more extensive suite of Slate Islands samples confirms previous interpretations. It indicates clearly that recorded shock pressures, as determined by planar deformation feature orientations, increased towards the center. The 'shock center' is very close (considering the structural movements during cavity modification) to that from an independent determination from shatter cone orientations. Shock metamorphism at a higher level in breccia clasts than in the adjacent country rocks is evidence that the shock event preceded the formation of the breccia dikes. These observations, which are consistent with those at other impact structures, are all contrary to the interpretation by Sage that breccia dike formation by diatreme action was the source of the shock event. There is no plausible reason to consider the Slate Islands as anything but the emergent portion of the central uplift of a complex impact crater. It cannot be cited as an example of endogenic shock in arguments regarding evidence of impact in the terrestrial stratigraphic record.

Clastic Breccias at the Slates Islands Complex Impact Structure, Northern Lake Superior

NASA Technical Reports Server (NTRS)

Dressler, B. O.; Sharpton, V. L.; Schnieders, B.; Scott, J.

1996-01-01

About 150 impact craters are known on Earth and each year several structures are added to this number. The general geology of the Slate Islands archipelago has been described by Sage (1991) and a short summary based on Sage's work is given in Dressler et al. (1995). The reader is referred to these publications for information on the bedrock geology of the island group. Early studies on the Slate Islands impact structure include: Halls and Grieve (1976), Grieve and Robertson (1976) and Stesky and Halls (1983). In this report, we provide a summary of the impact process as presently understood. We also present some of the results of our laboratory investigations conducted in 1995 and 1996. We describe in some detail the various clastic breccias encountered on the islands during our 1994 and 1995 field work and relate them to the various phases of the impact process. A more encompassing treatise on the breccias has been submitted for publication. (Dressler and Sharpton 1996).

Effects of portable computing devices on posture, muscle activation levels and efficiency.

PubMed

Werth, Abigail; Babski-Reeves, Kari

2014-11-01

Very little research exists on ergonomic exposures when using portable computing devices. This study quantified muscle activity (forearm and neck), posture (wrist, forearm and neck), and performance (gross typing speed and error rates) differences across three portable computing devices (laptop, netbook, and slate computer) and two work settings (desk and computer) during data entry tasks. Twelve participants completed test sessions on a single computer using a test-rest-test protocol (30min of work at one work setting, 15min of rest, 30min of work at the other work setting). The slate computer resulted in significantly more non-neutral wrist, elbow and neck postures, particularly when working on the sofa. Performance on the slate computer was four times less than that of the other computers, though lower muscle activity levels were also found. Potential or injury or illness may be elevated when working on smaller, portable computers in non-traditional work settings. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

PRODUCTION OF THORIA WARE

DOEpatents

Murray, P.; Denton, I.; Wilkinson, D.

1957-10-01

The production of thoria ware of very low porosity by the slip casting of pure thoria is described. It comprises dry milling calcined thoria to obtain particles ranging up to 11 microns in size and having 60% of particles less than 2 microns, forming an aqueous slip of the milled thoric casting the slip and firing the dry cast at a sintering temperature of from 1600 to 1825 d C. The preferred composition of the slip is 1600 grams of thoria in each liter of slip. The preferred pH of the slip is 1. When thoria of 99.9% purity is used the slip is suitable for casting for as long as six weeks after preparation.

Effect of Americium-241 Content on Plutonium Radiation Source Terms

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rainisch, R.

1998-12-28

The management of excess plutonium by the US Department of Energy includes a number of storage and disposition alternatives. Savannah River Site (SRS) is supporting DOE with plutonium disposition efforts, including the immobilization of certain plutonium materials in a borosilicate glass matrix. Surplus plutonium inventories slated for vitrification include materials with elevated levels of Americium-241. The Am-241 content of plutonium materials generally reflects in-growth of the isotope due to decay of plutonium and is age-dependent. However, select plutonium inventories have Am-241 levels considerably above the age-based levels. Elevated levels of americium significantly impact radiation source terms of plutonium materials andmore » will make handling of the materials more difficult. Plutonium materials are normally handled in shielded glove boxes, and the work entails both extremity and whole body exposures. This paper reports results of an SRS analysis of plutonium materials source terms vs. the Americium-241 content of the materials. Data with respect to dependence and magnitude of source terms on/vs. Am-241 levels are presented and discussed. The investigation encompasses both vitrified and un-vitrified plutonium oxide (PuO2) batches.« less

Use of lead-glazed ceramic ware and lead-based folk remedies in a rural community of Baja California, Mexico.

PubMed

Welton, Michael; Rodriguez-Lainz, Alfonso; Loza, Oralia; Brodine, Stephanie; Fraga, Miguel

2018-03-01

Lead exposure from lead-glazed ceramics (LGCs) and traditional folk remedies have been identified as significant sources of elevated blood lead levels in Mexico and the United States. This study took place from 2005 to 2012 in a rural community in Baja California, Mexico. 1) Investigate the knowledge, attitudes, and practices related to lead and lead exposures from LGCs and two lead-based folk remedies ( azarcon and greta); and 2) evaluate a pilot intervention to provide alternative lead-safe cookware. A baseline household survey was conducted in 2005, followed by the pilot intervention in 2006, and follow-up surveys in 2007 and 2012. For the pilot intervention, families who reported using LGCs were given lead-safe alternative cookware to try and its acceptance was evaluated in the following year. The community was mostly of indigenous background from Oaxaca and a high proportion of households had young children. In 2006, all participants using traditional ceramic ware at the time ( n = 48) accepted lead-safe alternative cookware to try, and 97% reported that they were willing to exchange traditional ceramic ware for lead-safe alternatives. The use of ceramic cookware decreased from over 90% during respondents' childhood household use in Oaxaca to 47% in 2006 among households in Baja California, and further reduced to 16.8% in 2012. While empacho, a folk illness, was widely recognized as an intestinal disorder, there was almost universal unfamiliarity with the use and knowledge of azarcon and greta for its treatment. This pilot evaluation provides evidence 1) for an effective and innovative strategy to reduce lead exposure from LGCs and 2) of the feasibility of substituting lead-free alternative cookware for traditional ceramic ware in a rural indigenous community, when delivered in a culturally appropriate manner with health education. This strategy could complement other approaches to reduce exposure to lead from LGCs.

Reducing firing of an early pottery making kiln at Batán Grande, Peru: A Mössbauer study

NASA Astrophysics Data System (ADS)

Wagner, U.; Gebhard, R.; Häusler, W.; Hutzelmann, T.; Riederer, J.; Shimada, I.; Sosa, J.; Wagner, F. E.

1999-11-01

Material from field firing experiments using a 2,700-year old Formative kiln at Batán Grande, Peru, was studied by X-ray diffraction and Mössbauer spectroscopy. The experiments explore the technology involved in producing the gray and black reduced ware for which Cupisnique and other Formative ceramics are justly known. During firing, the iron-bearing compounds in clays undergo characteristic changes which depend on kiln temperature and atmosphere. These changes can be observed in the Mössbauer spectra. By comparing spectra of an appropriate clay fired in field experiments and in the laboratory with the spectra of ancient ceramics, a description of Formative firing techniques in a reducing environment is attempted.

Left thoracotomy HeartWare implantation with outflow graft anastomosis to the descending aorta: a simplified bridge for patients with multiple previous sternotomies.

PubMed

Umakanthan, Ramanan; Haglund, Nicholas A; Stulak, John M; Joyce, Lyle D; Ahmad, Rashid; Keebler, Mary E; Maltais, Simon

2013-01-01

Advances in mechanical circulatory support have been critical in bridging patients awaiting heart transplantation. In addition, improvement in device durability has enabled left ventricular assist device therapy to be applied as destination therapy in those not felt to be transplant candidate. Because of the increasing complexity of patients, there continues to be a need for alternative strategies for device implantation to bridge high-risk patients awaiting heart transplantation, wherein the risks of numerous previous sternotomies may be prohibitive. We present a unique technique for placement of the HeartWare ventricular assist device via left anterior thoracotomy to the descending aorta in a patient awaiting heart transplantation with a history of multiple previous sternotomies.

Roman mosaic glass: a study of production processes, using PIXE spectrometry

NASA Astrophysics Data System (ADS)

Fleming, S. J.; Swann, C. P.

1999-04-01

The most attractive Roman glass produced during the early part of the 1st century A.D. was mosaic ware - bowls and dishes molded from arrays of multi-colored canes that created abstract floral and geometric designs. Yet ancient literature tells us little about the organization of the glassworking industry in which such wares were produced. We have focused upon two kinds of mosaic decoration that include a component of white glass in their cane construction and have purple glass as their matrix. A consistent pattern in the minor levels of lead in each kind of glass suggests that they were the products of two separate workshops, each with separate sources of supply for their glass stock.

Detrital zircon U-Pb geochronology and provenance of the Carboniferous-Permian glaciomarine pebbly slates in the Tibetan Plateau

NASA Astrophysics Data System (ADS)

Wang, Q.; Zhu, D.; Zhao, Z.; Chung, S.; Li, C.; Sui, Q.; Fu, X.; Mo, X.

2011-12-01

Glaciomarine diamictites (including pebbly slate, pebbly siltstone, and pebbly sandstone) in the Tibetan Plateau are widely interpreted to have been associated with the deglaciation of the Indian continent. Guiding by zircon cathodoluminescence images, we determined U-Pb ages for detrital zircons from five typical Carboniferous-Permian pebbly slate samples from the Qiangtang, Lhasa, and Tethyan Himalaya of the Tibetan Plateau. The age distributions of detrital zircons from two samples (180 analyses) from Qiwu and Gangma Tso of the Qiangtang Terrane are similar, with two main age peaks ca. 579 and ca. 816 Ma and one minor age peak ca. 2490 Ma. Two samples (177 analyses) from Jiangrang and Damxung of the Lhasa Terrane define similar age distributions with two main age peaks ca. 539 and ca. 1175 Ma. Ages of detrital zircons from one sample (110 analyses) from Kangmar of the Tethyan Himalaya display main age peaks ca. 535, ca. 949, and ca. 2490 Ma. The ca. 816-Ma detrital zircons from the Qiangtang Terrane were most likely derived from the Lesser Himalaya, and the ca. 950-Ma detrital zircons from the Tethyan Himalaya might have been sourced from the High Himalaya, Eastern Ghats Province of the Indian plate and the Rayner Province of East Antarctica. The distinctive ca. 1175-Ma age population characteristic of zircons in the pebbly slates from the Lhasa Terrane is identical to the detrital zircons from the late Paleozoic sandstones (Zhu et al., 2011a) and the inherited zircons from the Mesozoic peraluminous granites (Zhu et al., 2011b) in this terrane, but significantly absent in the pebbly slates from both the Qiangtang and the Tethyan Himalayan terranes. The ca. 1175-Ma detrital zircons in the Lhasa Terrane were most likely sourced from the Albany-Fraser-Wilkes in southwestern Australia and East Antarctica. These new data obtained in this study reveal a distinct difference of detrital zircon provenance for the coeval Carboniferous-Permian glaciomarine pebbly slates from different terranes of the Tibetan Plateau. Such difference may have been associated primarily with the different paleogeographical positions of the Lhasa Terrane that was adjacent to northern Australia and of the Qiangtang and Tethyan Himalaya terranes that were situated in the northern margin of the Indian continent, respectively. [Financially supported by the National Key Project for Basic Research of China (2011CB403102), the Chinese National Natural Science Foundation (41073013 and 40830317), and the Programme of the China Geological Survey (1212011121260 and 1212011121066)]. Zhu, D.C., et al., 2011a. Geology 39, 727-730. Zhu, D.C., et al., 2011b. Acta Petrologica Sinica 27, 1917-1930.

Low-cost real-time 3D PC distributed-interactive-simulation (DIS) application for C4I

NASA Astrophysics Data System (ADS)

Gonthier, David L.; Veron, Harry

1998-04-01

A 3D Distributed Interactive Simulation (DIS) application was developed and demonstrated in a PC environment. The application is capable of running in the stealth mode or as a player which includes battlefield simulations, such as ModSAF. PCs can be clustered together, but not necessarily collocated, to run a simulation or training exercise on their own. A 3D perspective view of the battlefield is displayed that includes terrain, trees, buildings and other objects supported by the DIS application. Screen update rates of 15 to 20 frames per second have been achieved with fully lit and textured scenes thus providing high quality and fast graphics. A complete PC system can be configured for under $2,500. The software runs under Windows95 and WindowsNT. It is written in C++ and uses a commercial API called RenderWare for 3D rendering. The software uses Microsoft Foundation classes and Microsoft DirectPlay for joystick input. The RenderWare libraries enhance the performance through optimization for MMX and the Pentium Pro processor. The RenderWare and the Righteous 3D graphics board from Orchid Technologies with an advertised rendering rate of up to 2 million texture mapped triangles per second. A low-cost PC DIS simulator that can partake in a real-time collaborative simulation with other platforms is thus achieved.

Early Feasibility Testing and Engineering Development of the Transapical Approach for the HeartWare MVAD Ventricular Assist System

PubMed Central

Tamez, Daniel; LaRose, Jeffrey A.; Shambaugh, Charles; Chorpenning, Katherine; Soucy, Kevin G; Sobieski, Michael A; Sherwood, Leslie; Giridharan, Guruprasad A; Monreal, Gretel; Koenig, Steven C; Slaughter, Mark S

2014-01-01

Implantation of ventricular assist devices (VADs) for treatment of end-stage heart failure (HF) falls decidedly short of clinical demand, which exceeds 100,000 HF patients per year. VAD implantation often requires major surgical intervention with associated risk of adverse events and long recovery periods. To address these limitations, HeartWare, Inc. (Miami Lakes, FL) has developed a platform of miniature ventricular devices with progressively reduced surgical invasiveness and innovative patient peripherals. One surgical implant concept is a transapical version of the miniaturized left ventricular assist device (MVAD). The HeartWare MVAD Pump® is a small, continuous flow, full-support device that has a displacement volume of 22mL. A new cannula configuration has been developed for transapical implantation, where the outflow cannula is positioned across the aortic valve. The two primary objectives for this feasibility study were to evaluate anatomic fit and surgical approach and efficacy of the transapical MVAD configuration. Anatomic fit and surgical approach were demonstrated using human cadavers (n=4). Efficacy was demonstrated in acute (n =2) and chronic (n = 1) bovine model experiments and assessed by improvements in hemodynamics, biocompatibility, flow dynamics, and histopathology. Potential advantages of the MVAD Pump include flow support in the same direction as the native ventricle, elimination of cardiopulmonary bypass, and minimally-invasive implantation. PMID:24399057

The Effects of Long Term Cure on Offgassed Products of Coatings

NASA Technical Reports Server (NTRS)

Engle, Ginger; Whitfield, Steve

1997-01-01

The Environmental Chemistry and Compatability Team at The Marshall Space Flight Center conducts toxic offgassing analysis on materials and flight hardware for use in habitable environments aboard the Space Shuttle and the International Space Station. As part of Research and Development, the Toxic Offgassing Laboratory conducted a long term cure study on four polyurethane coatings which are slated for potential use on Space Station. This study demonstrates the effects of cure time and temperature on the total tox value (sum T) and the maximum usage weight for each coating. All analysis was conducted according to test procedures outlined specifically for Space Station environments. Therefore, the ratings and weight limits generated for these materials are most applicable to space environments. However, this test does give some indication of time frames for solvent removal and is therefore of interest to, the environmental community as a whole.

Microstructure and properties of ceramics

NASA Technical Reports Server (NTRS)

Hamano, K.

1984-01-01

The history of research into the microstructure and properties of ceramic ware is discussed; methods of producing ceramics with particular characteristics are investigated. Bubbles, sintering, cracks, and electron microscopy are discussed.

Anne Elizabeth Ware | NREL

Science.gov Websites

Accumulation in Leaves of Sorghum bicolor (L.) Moench: A Source of Natural Food Pigment," J. Agricultural and Food Chemistry (2014) "Catalytic deoxygenation of triglycerides and fatty acids to

Applied analysis of lacquer films based on pyrolysis-gas chromatography/mass spectrometry.

PubMed

Lu, Rong; Kamiya, Yukio; Miyakoshi, Tetsuo

2006-09-15

Ancient lacquer film, a Nanban lacquer film, an old lacquer-ware object imported from an Asian country, and the Baroque and Rococo lacquer films were analyzed by pyrolysis-gas chromatography/mass spectrometry. Compared with the results of the natural lacquer film, it was revealed that the ancient lacquer film and Nanban lacquer film were made from Rhus vernicifera, and the old lacquer-ware imported from an Asian country was made from Melanorrhoea usitata. However, the Baroque and Rococo lacquer films obtained from the Doerner Institute in Munich, Germany were made from natural resins. 3-Pentadecylcatechol (MW=320) (urushiol), 3-heptadecylcatechol (MW=348) (laccol), and 4-heptadecylcatechol (MW=348) (thitsiol) were the main products of the pyrolysis of R. vernicifera, Rhus succedanea, and M. usitata.

Left Thoracotomy HeartWare Implantation With Outflow Graft Anastomosis to the Descending Aorta: A Simplified Bridge for Patients With Multiple Previous Sternotomies

PubMed Central

Umakanthan, Ramanan; Haglund, Nicholas A.; Stulak, John M.; Joyce, Lyle D.; Ahmad, Rashid; Keebler, Mary E.; Maltais, Simon

2014-01-01

Advances in mechanical circulatory support have been critical in bridging patients awaiting heart transplantation. In addition, improvement in device durability has enabled left ventricular assist device therapy to be applied as destination therapy in those not felt to be transplant candidate. Because of the increasing complexity of patients, there continues to be a need for alternative strategies for device implantation to bridge high-risk patients awaiting heart transplantation, wherein the risks of numerous previous sternotomies may be prohibitive. We present a unique technique for placement of the HeartWare ventricular assist device via left anterior thoracotomy to the descending aorta in a patient awaiting heart transplantation with a history of multiple previous sternotomies. PMID:24172273

Influence of crystal allomorph and crystallinity on the products and behavior of cellulose during fast pyrolysis

DOE PAGES

Mukarakate, Calvin; Mittal, Ashutosh; Ciesielski, Peter N.; ...

2016-07-19

Here, cellulose is the primary biopolymer responsible for maintaining the structural and mechanical integrity of cell walls and, during the fast pyrolysis of biomass, may be restricting cell wall expansion and inhibiting phase transitions that would otherwise facilitate efficient escape of pyrolysis products. Here, we test whether modifications in two physical properties of cellulose, its crystalline allomorph and degree of crystallinity, alter its performance during fast pyrolysis. We show that both crystal allomorph and relative crystallinity of cellulose impact the slate of primary products produced by fast pyrolysis. For both cellulose-I and cellulose-II, changes in crystallinity dramatically impact the fastmore » pyrolysis product portfolio. In both cases, only the most highly crystalline samples produced vapors dominated by levoglucosan. Cellulose-III, on the other hand, produces largely the same slate of products regardless of its relative crystallinity and produced as much or more levoglucosan at all crystallinity levels compared to cellulose-I or II. In addition to changes in products, the different cellulose allomorphs affected the viscoelastic properties of cellulose during rapid heating. Real-time hot-stage pyrolysis was used to visualize the transition of the solid material through a molten phase and particle shrinkage. SEM analysis of the chars revealed additional differences in viscoelastic properties and molten phase behavior impacted by cellulose crystallinity and allomorph. Regardless of relative crystallinity, the cellulose-III samples displayed the most obvious evidence of having transitioned through a molten phase.« less

Estimated probabilities, volumes, and inundation areas depths of potential postwildfire debris flows from Carbonate, Slate, Raspberry, and Milton Creeks, near Marble, Gunnison County, Colorado

USGS Publications Warehouse

Stevens, Michael R.; Flynn, Jennifer L.; Stephens, Verlin C.; Verdin, Kristine L.

2011-01-01

During 2009, the U.S. Geological Survey, in cooperation with Gunnison County, initiated a study to estimate the potential for postwildfire debris flows to occur in the drainage basins occupied by Carbonate, Slate, Raspberry, and Milton Creeks near Marble, Colorado. Currently (2010), these drainage basins are unburned but could be burned by a future wildfire. Empirical models derived from statistical evaluation of data collected from recently burned basins throughout the intermountain western United States were used to estimate the probability of postwildfire debris-flow occurrence and debris-flow volumes for drainage basins occupied by Carbonate, Slate, Raspberry, and Milton Creeks near Marble. Data for the postwildfire debris-flow models included drainage basin area; area burned and burn severity; percentage of burned area; soil properties; rainfall total and intensity for the 5- and 25-year-recurrence, 1-hour-duration-rainfall; and topographic and soil property characteristics of the drainage basins occupied by the four creeks. A quasi-two-dimensional floodplain computer model (FLO-2D) was used to estimate the spatial distribution and the maximum instantaneous depth of the postwildfire debris-flow material during debris flow on the existing debris-flow fans that issue from the outlets of the four major drainage basins. The postwildfire debris-flow probabilities at the outlet of each drainage basin range from 1 to 19 percent for the 5-year-recurrence, 1-hour-duration rainfall, and from 3 to 35 percent for 25-year-recurrence, 1-hour-duration rainfall. The largest probabilities for postwildfire debris flow are estimated for Raspberry Creek (19 and 35 percent), whereas estimated debris-flow probabilities for the three other creeks range from 1 to 6 percent. The estimated postwildfire debris-flow volumes at the outlet of each creek range from 7,500 to 101,000 cubic meters for the 5-year-recurrence, 1-hour-duration rainfall, and from 9,400 to 126,000 cubic meters for the 25-year-recurrence, 1-hour-duration rainfall. The largest postwildfire debris-flow volumes were estimated for Carbonate Creek and Milton Creek drainage basins, for both the 5- and 25-year-recurrence, 1-hour-duration rainfalls. Results from FLO-2D modeling of the 5-year and 25-year recurrence, 1-hour rainfalls indicate that the debris flows from the four drainage basins would reach or nearly reach the Crystal River. The model estimates maximum instantaneous depths of debris-flow material during postwildfire debris flows that exceeded 5 meters in some areas, but the differences in model results between the 5-year and 25-year recurrence, 1-hour rainfalls are small. Existing stream channels or topographic flow paths likely control the distribution of debris-flow material, and the difference in estimated debris-flow volume (about 25 percent more volume for the 25-year-recurrence, 1-hour-duration rainfall compared to the 5-year-recurrence, 1-hour-duration rainfall) does not seem to substantially affect the estimated spatial distribution of debris-flow material. Historically, the Marble area has experienced periodic debris flows in the absence of wildfire. This report estimates the probability and volume of debris flow and maximum instantaneous inundation area depths after hypothetical wildfire and rainfall. This postwildfire debris-flow report does not address the current (2010) prewildfire debris-flow hazards that exist near Marble.

RADIOLOGICAL SURVEY STATION DEVELOPMENT FOR THE PIT DISASSEMBLY AND CONVERSION PROJECT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dalmaso, M.; Gibbs, K.; Gregory, D.

2011-05-22

The Savannah River National Laboratory (SRNL) has developed prototype equipment to demonstrate remote surveying of Inner and Outer DOE Standard 3013 containers for fixed and transferable contamination in accordance with DOE Standard 3013 and 10 CFR 835 Appendix B. When fully developed the equipment will be part of a larger suite of equipment used to package material in accordance with DOE Standard 3013 at the Pit Disassembly and Conversion Project slated for installation at the Savannah River Site. The prototype system consists of a small six-axis industrial robot with an end effector consisting of a force sensor, vacuum gripper andmore » a three fingered pneumatic gripper. The work cell also contains two alpha survey instruments, swipes, swipe dispenser, and other ancillary equipment. An external controller interfaces with the robot controller, survey instruments and other ancillary equipment to control the overall process. SRNL is developing automated equipment for the Pit Disassembly and Conversion (PDC) Project that is slated for the Savannah River Site (SRS). The equipment being developed is automated packaging equipment for packaging plutonium bearing materials in accordance with DOE-STD-3013-2004. The subject of this paper is the development of a prototype Radiological Survey Station (RSS). Other automated equipment being developed for the PDC includes the Bagless transfer System, Outer Can Welder, Gantry Robot System (GRS) and Leak Test Station. The purpose of the RSS is to perform a frisk and swipe of the DOE Standard 3013 Container (either inner can or outer can) to check for fixed and transferable contamination. This is required to verify that the contamination levels are within the limits specified in DOE-STD-3013-2004 and 10 CFR 835, Appendix D. The surface contamination limit for the 3013 Outer Can (OC) is 500 dpm/100 cm2 (total) and 20 dpm/100 cm2 (transferable). This paper will concentrate on the RSS developments for the 3013 OC but the system for the 3013 Inner Can (IC) is nearly identical.« less

29 CFR 784.14 - “Goods.”

Code of Federal Regulations, 2011 CFR

2011-07-01

... FISHING AND OPERATIONS ON AQUATIC PRODUCTS General Some Basic Definitions § 784.14 “Goods.” The definition... marine equipment), wares, products, commodities, merchandise, or articles or subjects of commerce of any...

29 CFR 784.14 - “Goods.”

Code of Federal Regulations, 2010 CFR

2010-07-01

... FISHING AND OPERATIONS ON AQUATIC PRODUCTS General Some Basic Definitions § 784.14 “Goods.” The definition... marine equipment), wares, products, commodities, merchandise, or articles or subjects of commerce of any...

Back table outflow graft anastomosis technique for HeartWare HVAD implantation.

PubMed

Basher, S; Bick, J; Maltais, S

2015-12-01

The management of concomitant aortic and aortic valve disease with left ventricular assist device (LVAD) implantation for patients with severe cardiomyopathy is challenging, and has not been established given the complexity of LVAD surgery with concomitant aortic interventions. A 45-year-old patient presented to our institution with end-stage heart failure symptoms and non-ischemic cardiomyopathy. The patient was found to have a bicuspid aortic valve, severe native aortic regurgitation, a significant ascending aortic aneurysm, and severely depressed left ventricular (LV) function requiring two inotropes. He underwent a successful hemiarch repair of the ascending aortic aneurysm using a back table outflow graft anastomosis technique, and subsequent placement of a HeartWare Ventricular Assist Device (HVAD) with concomitant aortic valve closure with a modified Park's stitch. The patient did well postoperatively and is currently listed for heart transplantation.

[Aluminum--occurrence and toxicity for organisms].

PubMed

Ochmański, W; Barabasz, W

2000-01-01

Aluminium (Al.) is an ubiquitous element found in every food product. The sources of Al. are especially corn, yellow cheese, salt, herbs, spices, tea and tap water. In household Al.-made ware is a major source of the element. Al. may cause diseases in humans, especially hampers many metabolic processes especially turnover of calcium, phosphorus and iron. Salts of Al. may bind to DNA, RNA, inhibit such enzymes as hexokinase, acid and alkaline phosphatases, phosphodiesterase and phosphooxydase. Al. salts are especially harmful to nervous, hematopoietic systems and to skeleton. Al. gets to organism with food, water, cosmetics, from aluminium ware and containers. Toxicity comes from substitution of Mg and Fe ions effecting in disturbances in intracellular signaling, excretory functions and cellular growth. Neurotoxic action of Al. probably comes from substitution of Mg ions in ATP, what finally influences function of every ATP using-enzymes. There are observations in experimental models proving Al. salts are responsible for Alzheimer disease development. Toxicity of Al. to skeletal system results in diminished resistance thus tendencies to breaking, and comes from lower collagen synthesis and slowing down of mineralisation. Low erythropoietin production, inhibition of hem-synthesing enzymes and binding of Al. to transferrin, effects in anaemia. Carcinogenic effects of Al. were nor proved nor denied, but high concentrations of Al. were found in many neoplastic cells. In conclusion, we should introduce prophylactic measures effecting in less Al. intake esp. avoiding use of Al.-made ware nad controlling food for Al. content.

Surfactant-Assisted Coal Liquefaction

NASA Technical Reports Server (NTRS)

Hickey, Gregory S.; Sharma, Pramod K.

1993-01-01

Obtaining liquid fuels from coal which are economically competitive with those obtained from petroleum based sources is a significant challenge for the researcher as well as the chemical industry. Presently, the economics of coal liquefaction are not favorable because of relatively intense processing conditions (temperatures of 430 degrees C and pressures of 2200 psig), use of a costly catalyst, and a low quality product slate of relatively high boiling fractions. The economics could be made more favorable by achieving adequate coal conversions at less intense processing conditions and improving the product slate. A study has been carried out to examine the effect of a surfactant in reducing particle agglomeration and improving hydrodynamics in the coal liquefaction reactor to increase coal conversions...

Regional and Detailed Survey for Radon Activities in Soil-Gas and Groundwater in the Okchon Zone, Korea

NASA Astrophysics Data System (ADS)

Je, H.-K.; Chon, H.-T.

2012-04-01

The Okchon zone in Korea provides a typical example of natural geological materials enriched in potentially toxic elements including uranium which is parent nuclide for radon gas. For the purpose of radon radioactivity risk assessment, making the map of radon risk grade from Okchon zone, regional and detailed field surveys were carried out during 3 years. The study area is located in the central part of Korea, called the Okchon zone (about 5,100 km2), which occur in a 80km wide, northeast-trending belt that extends across the Korean Peninsula. The Okchon zone is underlain by metasedimentary rocks of unknown age that are composed mainly of black slate, phyllite, shale, and limestone. The three research areas (defined as Boeun, Chungju, and Nonsan) for detailed survey were selected from the results of regional survey. Results of detailed radon survey indicated a wide range of radon activities for soil-gases (148-1,843 pCi/L) and ground waters (23-5,540 pCi/L). About 15 percent of soil-gas samples exceeded 1,000 pCi/L and 84 percent of ground water samples exceeded the MCL (maximum contaminant level) of drinking water, 300 pCi/L, which proposed by U.S. Environmental Protection Agency in 1999. For detailed survey, radon activities of soil-gas and ground water were classified as bedrock geology, based on 1/50,000 geological map and field research. For soil-gas measurements, mean values of radon activity from black slate-shale (789 pCi/L) were highest among the other base rocks. And for groundwater measurements, mean value of radon activities were decreased in the order of granite (1,345 pCi/L) > black shale-slate (915 pCi/L) > metasediments (617 pCi/L). Result of indoor radon measurement from detailed survey areas showed that about 50% of houses exceeded the indoor guideline, 4 pCi/L. For the radon risk assessment in indoor environment showed that probability of lung cancer risk from the houses located on the granite base rock (3.0×10-2) was highest among the other base rocks. Finally, the maps of radon risk grade from detailed survey areas were developed by the application of field data and statistical simulation.

1. Historic American Buildings Survey E. W. Russell, Photographer, March ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Historic American Buildings Survey E. W. Russell, Photographer, March 14, 1936 REAR VIEW, NORTH OF SLAVE QUARTERS - Waring House, Slave Quarters, 351 Government Street (now South Claiborne Street), Mobile, Mobile County, AL

38 CFR 3.810 - Clothing allowance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... wears or uses certain prosthetic or orthopedic appliances which tend to wear or tear clothing (including... or used which tends to ware or tear the veteran's clothing, or that because of the use of a physician...

Will Deep Impact Make a Splash?

NASA Technical Reports Server (NTRS)

Sheldon, Robert B.; Hoover, Richard B.

2005-01-01

Recent cometary observations from spacecraft flybys support the hypothesis that short-period comets have been substantially modified by the presence of liquid water. Such a model can resolve many outstanding questions of cometary dynamics, as well as the differences between the flyby observations and the dirty snowball paradigm. The model also predicts that the Deep Impact mission, slated for a July 4, 2005 collision with Comet Temple-1, will encounter a layered, heterogenous nucleus with subsurface liquid water capped by dense crust. Collision ejecta will include not only vaporized material, but liquid water and large pieces of crust. Since the water will immediately boil, we predict that the water vapor signature of Deep Impact may be an order of magnitude larger than that expected from collisional vaporization alone.

THE MATERIALS ON INTERNATIONAL SPACE STATION EXPERIMENT (MISSE): FIRST RESULTS FROM MSFC INVESTIGATIONS

NASA Technical Reports Server (NTRS)

Finckenor, Miria

2006-01-01

Marshall Space Flight Center worked with the Air Force Research Laboratory, Naval Research Laboratory, Langley Research Center, Glenn Research Center, the Jet Propulsion Laboratory, Johnson Space Center, Boeing, Lockheed Martin, TRW, the Aerospace Corporation, Triton Systems, AZ Technology, Alion (formerly IITRI), ENTECH, and L'Garde to bring together the first external materials exposure experiment on International Space Station (ISS). MISSE re-uses hardware from the MEEP flown on the Russian space station Mir. MISSE has returned a treasure trove of materials data that will be useful not only for ISS but also for programs as diverse as the new Crew Exploration Vehicle, the James Webb Telescope, the Lunar Surface Access Module, the Robotic Lunar Exploration Program, High Altitude Airships, and solar sails. MISSE-1 and -2 (Figure 1) were attached to the Quest airlock on ISS for 4 years and were retrieved during STS-114. MISSE-3 and -4 were bumped fr-om STS-114 and are currently slated for deployment during STS-121. MISSE-5 (Figure 2) was deployed during STS-114.

Strength and Density of Geopolymer Mortar Cured at Ambient Temperature for Use as Repair Material

NASA Astrophysics Data System (ADS)

Warid Wazien, A. Z.; Bakri Abdullah, Mohd Mustafa Al; Abd. Razak, Rafiza; Mohd Remy Rozainy, M. A. Z.; Faheem Mohd Tahir, Muhammad

2016-06-01

Geopolymers produced by synthesizing aluminosilicate source materials with an alkaline activator solution promised an excellent properties akin to the existing construction material. This study focused on the effect of various binder to sand ratio on geopolymer mortar properties. Mix design of geopolymer mortar was produced using NaOH concentration of 12 molars, ratio of fly ash/alkaline activator and ratio Na2SiO3/NaOH of 2.0 and 2.5 respectively. Samples subsequently ware cured at ambient temperature. The properties of geopolymer mortar were analysed in term of compressive strength and density at different period which are on the 3rd and 7th day of curing. Experimental results revealed that the addition of sand slightly increase the compressive strength of geopolymer. The optimum compressive strength obtained was up to 31.39 MPa on the 7th day. The density of geopolymer mortar was in the range between 2.0 g/cm3 to 2.23 g/cm3. Based on this findings, the special properties promoted by geopolymer mortar display high potential to be implemented in the field of concrete patch repair.

Piezoelectric Lead Zirconate Titanate (PZT) Ring Shaped Contour-Mode MEMS Resonators

NASA Astrophysics Data System (ADS)

Kasambe, P. V.; Asgaonkar, V. V.; Bangera, A. D.; Lokre, A. S.; Rathod, S. S.; Bhoir, D. V.

2018-02-01

Flexibility in setting fundamental frequency of resonator independent of its motional resistance is one of the desired criteria in micro-electromechanical (MEMS) resonator design. It is observed that ring-shaped piezoelectric contour-mode MEMS resonators satisfy this design criterion than in case of rectangular plate MEMS resonators. Also ring-shaped contour-mode piezoelectric MEMS resonator has an advantage that its fundamental frequency is defined by in-plane dimensions, but they show variation of fundamental frequency with different Platinum (Pt) thickness referred as change in ratio of fNEW /fO . This paper presents the effects of variation in geometrical parameters and change in piezoelectric material on the resonant frequencies of Platinum piezoelectric-Aluminium ring-shaped contour-mode MEMS resonators and its electrical parameters. The proposed structure with Lead Zirconate Titanate (PZT) as the piezoelectric material was observed to be a piezoelectric material with minimal change in fundamental resonant frequency due to Platinum thickness variation. This structure was also found to exhibit extremely low motional resistance of 0.03 Ω as compared to the 31-35 Ω range obtained when using AlN as the piezoelectric material. CoventorWare 10 is used for the design, simulation and corresponding analysis of resonators which is Finite Element Method (FEM) analysis and design tool for MEMS devices.

Hand Washing Induces a Clean Slate Effect in Moral Judgments: A Pupillometry and Eye-Tracking Study

PubMed Central

Kaspar, Kai; Krapp, Vanessa; König, Peter

2015-01-01

Physical cleansing is commonly understood to protect us against physical contamination. However, recent studies showed additional effects on moral judgments. Under the heading of the “Macbeth effect” direct links between bodily cleansing and one’s own moral purity have been demonstrated. Here we investigate (1) how moral judgments develop over time and how they are altered by hand washing, (2) whether changes in moral judgments can be explained by altered information sampling from the environment, and (3) whether hand washing affects emotional arousal. Using a pre-post control group design, we found that morality ratings of morally good and bad scenes acquired more extreme values in the control group over time, an effect that was fully counteracted by intermediate hand washing. This result supports the notion of a clean slate effect by hand washing. Thereby, eye-tracking data did not uncover differences in eye movement behavior that may explain differences in moral judgments. Thus, the clean slate effect is not due to altered information sampling from the environment. Finally, compared to the control group, pupil diameter decreased after hand washing, thus demonstrating a direct physiological effect. The results shed light on the physiological mechanisms behind this type of embodiment phenomenon. PMID:25994083

Worldwide Report, Arms Control

DTIC Science & Technology

1985-09-21

Intersoft- ware, Logic Control Control y Aplicaciones , Dielsa, Eliop, EISA, Sainco CTNE, Fagor Electronica, Standard CTNE, Fagor Electronica, Piher...regulation systems Industrial turbine of advanced design Alfa Sewing Machines Control y Aplicaciones , Danobat, Etxe-Tar C02, CO and ultraviolet lasers

Comparison of methods for measuring travel time at Florida freeways and arterials : [summary].

DOT National Transportation Integrated Search

2014-07-01

In this project, University of Florida researchers : collected field data along several highways to : evaluate travel time measurements from several : sources: STEWARD, BlueTOAD, INRIX, and HERE. : STEWARD (Statewide Transportation Engineering : Ware...

40 CFR 63.11440 - What are the monitoring requirements for new and existing sources?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Clay Ceramics Manufacturing Area Sources Standards, Compliance, and Monitoring Requirements § 63.11440... ceramic ware, you must conduct a daily check of the peak firing temperature. If the peak temperature...

Knowledge Retrieval Solutions.

ERIC Educational Resources Information Center

Khan, Kamran

1998-01-01

Excalibur RetrievalWare offers true knowledge retrieval solutions. Its fundamental technologies, Adaptive Pattern Recognition Processing and Semantic Networks, have capabilities for knowledge discovery and knowledge management of full-text, structured and visual information. The software delivers a combination of accuracy, extensibility,…

47 CFR 90.614 - Segments of the 806-824/851-869 MHz band for non-border areas.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., Jasper, Jeff Davis, Jefferson, Jenkins, Johnson, Jones, Lamar, Lanier, Laurens, Lee, Liberty, Lincoln..., Thomas, Tift, Toombs, Towns, Treutlen, Troup, Turner, Twiggs, Union, Upson, Walker, Walton, Ware, Warren...

47 CFR 90.614 - Segments of the 806-824/851-869 MHz band for non-border areas.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., Jasper, Jeff Davis, Jefferson, Jenkins, Johnson, Jones, Lamar, Lanier, Laurens, Lee, Liberty, Lincoln..., Thomas, Tift, Toombs, Towns, Treutlen, Troup, Turner, Twiggs, Union, Upson, Walker, Walton, Ware, Warren...

47 CFR 90.614 - Segments of the 806-824/851-869 MHz band for non-border areas.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., Jasper, Jeff Davis, Jefferson, Jenkins, Johnson, Jones, Lamar, Lanier, Laurens, Lee, Liberty, Lincoln..., Thomas, Tift, Toombs, Towns, Treutlen, Troup, Turner, Twiggs, Union, Upson, Walker, Walton, Ware, Warren...

Assessing the goodness-of-fit of the Laird and Ware model--an example: the Jimma Infant Survival Differential Longitudinal Study.

PubMed

Lesaffre, E; Asefa, M; Verbeke, G

1999-04-15

The Jimma Infant Survival Differential Longitudinal Study is an Ethiopian study, set up to establish risk factors affecting infant survival and to investigate socio-economic, maternal and infant-rearing factors that contribute most to the child's early survival. Here, a subgroup of about 1500 children born in Jimma town is examined for their first year's weight gain. Of special interest is the impact of certain cultural practices like uvulectomy, milk teeth extraction and butter swallowing, on child's weight gain; these have never been thoroughly investigated in any study. In this context, the linear mixed model (Laird and Ware) is employed. The purpose of this paper is to illustrate the practical issues when constructing the longitudinal model. Recently developed diagnostics will be used herefor. Finally, special attention will be paid to the two-stage interpretation of the linear mixed model.

Recent applications of PIXE spectrometry in archaeology II. Characterization of Chinese pottery exported to the Islamic world

NASA Astrophysics Data System (ADS)

Fleming, S. J.; Swann, C. P.

1992-02-01

The early 9th century A.D. trade links between China's Tang dynasty and the Western world, by land along the caravan routes of the Silk Road and by sea via India and the Gulf, encouraged a taste for many kinds of Chinese ceramics among the affluent societies of the Islamic empire. Using PIXE analysis to determine the primary composition and minor element patterns of the clay fabrics of a wide range of pottery recovered from the Islamic city of Siraf (in southern Iran), we have established clear differences between Chinese wares imported to that region and a variety of imitative wares of local origin. Parallels and contrasts are drawn between our data and those obtained by Chinese scholars in recent years for the products of various Tang kiln sites, particularly for a series of distinctive stonewares from Tongguan (Hunan province).

Council Meeting Highlights

NASA Astrophysics Data System (ADS)

Council held a very productive meeting on 17 June using telephone conferencing and a Web-based system for sharing documents. Although the Executive Committee and many other committees have long conducted their business telephonically, this was a first for Council. The early date of the Joint Assembly in Nice, which incorporated AGU's 2003 Spring Meeting, meant that the critical item for Council, approval of the slate of candidates for the next election, would not be ready for action at that time. Thus, the meeting was scheduled for June in conjunction with the Planning Committee. The slate of nominees for the 2004-2006 term was approved as presented by the Union and Section nominating committees. The accompanying story provides the names and the process for petition nominations from the membership.

In Brief: Suresh slated to head U.S. National Science Foundation

NASA Astrophysics Data System (ADS)

Showstack, Randy

2010-06-01

U.S. president Barack Obama announced on 3 June his intent to nominate Subra Suresh as the next director of the U.S. National Science Foundation (NSF). Arden Bement, who served as NSF director since 2004, resigned earlier this year to lead Purdue University's Global Policy Research Institute, in West Lafayette, Indiana. Suresh is dean of the School of Engineering and the Vannevar Bush Professor of Engineering at Massachusetts Institute of Technology (MIT), Cambridge. Suresh joined MIT in 1993 as the R. P. Simmons Professor of Materials Science and Engineering. Since then, he has held joint faculty appointments in the departments of Mechanical Engineering and Biological Engineering, as well as the Division of Health Sciences and Technology. He previously was head of the university's Department of Materials Science and Engineering. Suresh has a B.S. from the Indian Institute of Technology, Madras, India; an M.S. from Iowa State University of Science and Technology, Ames; and a Sc.D. from MIT.

76 FR 64102 - National Register of Historic Places; Notification of Pending Nominations and Related Actions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-17

... District, Roughly bounded by S. Philpot St., East Ave, E. Ware & Park Sts., Cedartown, 11000776 IDAHO Ada... following resource: MAINE Androscoggin County Cowan Mill Island Mill St., Lewiston, 85001656 [FR Doc. 2011...

Calculation of photonic bandgap for 2D hexagonal and square structure base on hybrid polymer material

NASA Astrophysics Data System (ADS)

Hidayat, S.; Riveli, N.

2018-05-01

We have calculated 2D photonic crystal band gap using plane-wave expansion method. The studied model of structures is hexagonal lattice and square lattice of rod cylinder in air. We have simulated the dispersion relation of it structure using hybrid polymer as rod material. The parameter structures are nrod = 1.5, nhole = 1, and rrod = 0.25a, where a is lattice constant. We found the distributed feedback occurs at the edge of upper band or frequency at 0.66 (a/λ). In our experimental work, we have successfully fabricated the 2D photonic crystal from hybrid polymer incorporated with organic dye laser. The lasing characteristics ware investigated using strip-line excitation light of SHG Nd-YAG laser (λ=532 nm). The lasing wavelengths for hexagonal structure are observed at 606 nm and 621 nm for photonic crystal period of 400 nm and 410 nm, respectively. λ=532 nm). Whereas the square structure, the lasing wavelengths are observed at (588 nm ± 2) and (606 nm ± 2 nm) for grating period of 391 nm and 405 nm.

A Survey of Fuel and Energy Information Sources: Volume II

EPA Pesticide Factsheets

... con"",,, alld r~~i~~1' ,rl~'~~~i!~S' than who.ld Tau! ... I'ART of the year, plenoc fill out thio form. ... effect and na'ure of any impor- \\ant ware acale chanl ...

Real-Time High-Dynamic Range Texture Mapping

DTIC Science & Technology

2001-01-01

the renderings produced by radiosity and global illumination algorithms. As a particular example, Greg Ward’s RADIANCE synthetic imaging system [32...in soft- ware only. [26] presented a technique for performing Ward’s tone reproduction algo- rithm interactively to visualize radiosity solutions

The development of the time-keeping clock with TS-1 single chip microcomputer.

NASA Astrophysics Data System (ADS)

Zhou, Jiguang; Li, Yongan

The authors have developed a time-keeping clock with Intel 8751 single chip microcomputer that has been successfully used in time-keeping station. The hard-soft ware design and performance of the clock are introduced.

Terahertz lens made out of natural stone.

PubMed

Han, Daehoon; Lee, Kanghee; Lim, Jongseok; Hong, Sei Sun; Kim, Young Kie; Ahn, Jaewook

2013-12-20

Terahertz (THz) time-domain spectroscopy probes the optical properties of naturally occurring solid aggregates of minerals, or stones, in the THz frequency range. Refractive index and extinction coefficient measurement reveals that most natural stones, including mudstone, sandstone, granite, tuff, gneiss, diorite, slate, marble, and dolomite, are fairly transparent for THz frequency waves. Dolomite in particular exhibits a nearly uniform refractive index of 2.7 over the broad frequency range from 0.1 to 1 THz. The high index of refraction allows flexibility in lens designing with a shorter accessible focal length or a thinner lens with a given focal length. Good agreement between the experiment and calculation for the THz beam profile confirms that dolomite has high homogeneity as a lens material, suggesting the possibility of using natural stones for THz optical elements.

Breeding biology and natural history of the Slate-throated Whitestart in Venezuela

USGS Publications Warehouse

Ruggera, R.A.; Martin, T.E.

2010-01-01

We provide details on the breeding biology of the Slate-throated Whitestart (Myioborus miniatus) from 126 nests found during seven breeding seasons, 2002-2008, at Yacamb?? National Park, Venezuela. Nesting activity peaked in late April and May. Only the female built the nest and incubated the eggs. Males rarely visited the nest during these stages. Mean clutch size (2.1 ?? 0.04 eggs, n = 93) was the smallest recorded for the Slate-throated Whitestart. Incubation and nestling period lengths were 15.3 ?? 0.31 (n = 21) and 10.8 ?? 0.24 (n = 7) days, respectively. Attentiveness (% of time on the nest) during incubation (59 ?? 1.6%, n = 52) was similar to other tropical warblers and much lower than northern relatives. This caused a relatively low egg temperature (34.40 ?? 0.33u C, n = ?? nests, 20 days) compared with north temperate birds. Both parents fed nestlings and increased their provisioning rates with nestling age. Growth rate based on nestling mass (k = 0.521 ?? 0.015) was faster than for other tropical passerines but slower than northern relatives. Predation was the main cause of nesting failure and rate of predation increased with age of the nest. An estimated 15% of nests were successful based on an overall Mayfield daily predation rate of 0.053 ?? 0.007. This study confirms a strong latitudinal variation in life history traits of warblers. ?? 2010 by the Wilson Ornithological Society.

New Constraints on the Slate Islands Impact Structure, Ontario, Canada

NASA Technical Reports Server (NTRS)

Sharpton, Virgil L.; Dressler, Burkhard O.; Herrick, Robert R.; Schnieders, Bernie; Scott, John

1996-01-01

The Slate Islands in northern Lake Superior represent the eroded remains of a complex impact crater, originally approximately 32 km in diameter. New field studies there reveal allogenic crater fill deposits along the eastern and northern portions of the islands indicating that this 500-800 Ma impact structure is not as heavily eroded as previously thought. Near the crater center, on the western side or Patterson Island, massive blocks of target rocks, enclosed within a matrix of fine-grained polymict breccia, record the extensive deformation associated with the central uplift. Shatter cones are a common structural feature on the islands and range from less than 3 cm to over 10 m in length. Although shatter cones are powerful tools for recognizing and analyzing eroded impact craters, their origin remains poorly constrained.

Arc of Responsibility: The Strength of AGU's Council

NASA Astrophysics Data System (ADS)

Leifert, Harvey

2007-11-01

When AGU members vote in the upcoming election for Union and section officers, they will determine the course of the Union over the next 2 years and beyond. AGU prides itself on holding contested elections, in which members are presented with a real choice, not a preapproved slate, take it or leave it. The statements of the slate of officers begin on page 499; biographies start on page 509. The nominees listed in this issue are volunteers who seek to serve AGU, and once elected, they will undertake a wide variety of duties for the organization. Their visions of AGU's future may vary, however; by carefully considering the candidates' statements and casting votes for those whose vision is most compatible with their own, members can help achieve the goals they wish to see fulfilled.

JPRS Report, China.

DTIC Science & Technology

1993-06-08

size, with some of its industrial wares entering international markets. Overall, however, because of the shortage of capital and some irrational ...time. Japan’s exuberance makes it a formidable adversary of the United States and the USSR in the scientific and high technology fields. The grim

Upper Blackstone Water Pollution Abatement District Chief Operator Recognized for Outstanding Service

EPA Pesticide Factsheets

Joseph Nowak, a resident of Ware Mass. and Chief Operator of the Upper Blackstone Water Pollution Abatement District (District) in Milbury, Mass., was honored by EPA with a 2016 Regional Wastewater Treatment Plant Operator of the Year Excellence Award.

Rewards for Good Marketing

ERIC Educational Resources Information Center

Germain, Carol Anne, Ed.

2009-01-01

Many professional library associations and affiliates "strongly encourage" the marketing of libraries and their wares. These organizations present awards, certificates, and monetary enticements to honor outstanding marketing programs. For most individuals or teams who are already working on and implementing marketing programs, the added effort of…

Coating method for graphite

DOEpatents

Banker, John G.; Holcombe, Jr., Cressie E.

1977-01-01

A method of limiting carbon contamination from graphite ware used in induction melting of uranium alloys is provided comprising coating the graphite surface with a suspension of Y.sub.2 O.sub.3 particles in water containing about 1.5 to 4% by weight sodium carboxymethylcellulose.

Coating method for graphite

DOEpatents

Banker, J.G.; Holcombe, C.E. Jr.

1975-11-06

A method of limiting carbon contamination from graphite ware used in induction melting of uranium alloys is provided. The graphite surface is coated with a suspension of Y/sub 2/O/sub 3/ particles in water containing about 1.5 to 4 percent by weight sodium carboxymethylcellulose.

Marine Debris and Plastic Source Reduction Toolkit

EPA Pesticide Factsheets

Many plastic food service ware items originate on college and university campuses—in cafeterias, snack rooms, cafés, and eateries with take-out dining options. This Campus Toolkit is a detailed “how to” guide for reducing plastic waste on college campuses.

Categorical regression dose-response modeling

EPA Science Inventory

The goal of this training is to provide participants with training on the use of the U.S. EPA’s Categorical Regression soft¬ware (CatReg) and its application to risk assessment. Categorical regression fits mathematical models to toxicity data that have been assigned ord...

Featured Molecules: Sucrose and Vanillin

NASA Astrophysics Data System (ADS)

Coleman, William F.; Wildman, Randall J.

2003-04-01

The WebWare molecules of the month for April relate to the sense of taste. Apple Fool, the JCE Classroom Activity, mentions sucrose and vanillin and their use as flavorings. Fully manipulable (Chime) versions of these and other molecules are available at Only@JCE Online.

Geology of the Lake Mary quadrangle, Iron County, Michigan

USGS Publications Warehouse

Bayley, Richard W.

1959-01-01

The Lake Mary quadrangle is in eastern Iron County, in the west part of the Upper Peninsula of Michigan. The quadrangle is underlain by Lower and Middle Precambrian rocks, formerly designated Archean and Algonkian rocks, and is extensively covered by Pleistocene glacial deposits. A few Upper Precambrian (Keweenawan) diabase dikes and two remnants of sandstone and dolomite of early Paleozoic age are also found in the area. The major structural feature is the Holmes Lake anticline, the axis of which strikes northwest through the northeast part of the quadrangle. Most of the quadrangle, therefore, is underlain by rock of the west limb of the anticline. To the northwest along the fold axis, the Holmes Lake anticline is separated from the Amasa oval by a saddle of transverse folds in the vicinity of Michigamme Mountain in the Kiernan quadrangle. The Lower Precambrian rocks are represented by the Dickinson group and by porphyritic red granite whose relation to the Dickinson group is uncertain, but which may be older. The rocks of the Dickinson group are chiefly green to black metavolcanic schist and red felsite, some of the latter metarhyolite. The dark schist is commonly magnetic. The Dickinson group underlies the core area of the Holmes Lake anticline, which is flanked by steeply dipping Middle Precambrian formations of the Animikie series. A major unconformity separates the Lower Precambrian rocks from the overlying Middle Precambrian rocks. In ascending order the formations of the Middle Precambrian are the Randville dolomite, the Hemlock formation, which includes the Mansfield iron-bearing slate member, and the Michigamme slate. An unconformity occurs between the Hemlock formation and Michigamme slate. The post-Hemlock unconformity is thought to be represented in the Lake Mary quadrangle by the absence of iron-formation of the Amasa formation, which is known to lie between the Hemlock and the Michigamme to the northwest of the Lake Mary quadrangle in the Crystal Falls quadrangle. Post-Hemlock erosion may account also for the absence of iron-formation of the Fence River formation on the east limb of the Holmes Lake anticline within the Lake Mary quadrangle. The Randville dolomite is not exposed and is known only from diamond drilling in the northeast part of the area where it occurs in the east and west limbs of the Holmes Lake anticline. The formation has a maximum thickness of about 2,100 feet; this includes a lower arkosic phase, some of which is quartz pebble conglomerate, a medial dolomitic phase, and an upper slate phase. The triad is gradational. Included within the formation are a few beds of chloritic schist thought to be of volcanic origin. An unconformity between the Randville and the succeeding Hemlock is not indicated in the quadrangle, but is probably present. The Hemlock formation is best exposed in the northwest and south-central parts of the area. The apparent thickness of the formation is 10,000- 17,000 feet. It is composed mainly of mafic metavolcanic rocks and intercalated slate and iron-formation. In the north part of the quadrangle the volcanic rocks are greenstone, which includes altered basaltic flow rocks, volcanic breccia, tuff, and slate. Pillow structures are common in the metabasalt. It is not certain if any Hemlock rocks are present in the east limb of the Holmes Lake anticline. In the south part of the quadrangle, the rocks of the Hemlock are chiefly chlorite and hornblende schist and hornfels. Pyroxene hornfels is sparingly present. At least two sedimentary slate belts are included in the Hemlock formation. One of these, the Mansfield iron-bearing slate member, includes in its upper part an altered chert-siderite iron-formation 30 to over 150 feet thick from which iron ore has been mined at the Mansfield location. The position of the iron-bearing rocks has been determined magnetically, and past explorations for iron ore are discussed. Though probably; unconformable, the contact between the Hemlock and the Michigamme formations appears conformable. The Michigamme slate consists of at least 4,000 feet of interbedded mica schist and granulite, the altered equivalents of the slate and graywacke characteristic of the Michigamme in adjacent areas. The Michigamme rocks are best exposed in the south part of the quadrangle in the vicinity of Peavy Pond. Two periods of regional metamorphism have resulted in the alteration of almost all of the rocks of the quadrangle. The Lower Precambrian rocks underwent at least one period of metamorphism, uplift, and erosion before the deposition of the Randville dolomite. After the deposition of the Michigamme slate, a post-Middle Precambrian period of regional metamorphism occurred with attending deformation and igneous intrusion. The grade of metamorphism rises toward the south in the area. The rocks in the northern two-thirds of the quadrangle are representative of greenschist facies of regional metamorphism, whereas the rocks in the southern onethird of the quadrangle are representative of the albite-epidote-amphibolite, the amphibolite, and the pyroxene hornfels facies, the metamorphic node centering about the intrusive Peavy Pond complex in the Peavy Pond area. The Precambrian sedimentary and volcanic rocks are cut by intrusive igneous rocks of different types and several different ages. Gabbroic sills and dikes invaded the Hemlock rocks at some time after the Hemlock was deposited and before the post-Middle Precambrian orogeny and metamorphism. Some contact metamorphism attended the intrusion of the major sills. One of the sills, the West Kiernan sill, is well differentiated. A syntectonic igneous body, composed of gabbro and minor ultramafic parts and fringed with intermediate and felsic differentiates and hybrids, the Peavy; Pond complex, was intruded into the Hemlock and Michigamme formations during the post-Middle Precambrian orogeny. The complex is situated in the Peavy Pond area at the crest of the regional metamorphic node. Contact-altered sedimentary and volcanic rocks margin the complex. The effects of regional metamorphism have been superposed on the contact metamorphic rocks peripheral to the complex and on the igneous rocks of the complex as well. The mafic augite-bearing rocks of the complex emplaced early in the orogeny were deformed by granulation at the peak of the deformation and subsequently metamorphosed to hornblende rocks. Some of the intermediate and felsic rocks of the complex were foliated by the deformation, while the more fluid, felsic parts of the complex were intruded under orogenic stress and crystallized after the peak of deformation. The deformation culminated in major faulting during which the formations were dislocated, and some of the granite of the complex was extremely brecciated. A few diabase dikes, probably of Keweenawan age, have intruded the deformed and altered Animikie rocks. The only known metallic resource is iron ore. The Mansfield mine produced 1¥2 million tons of high-grade iron ore between the years 1890 and 1913. Sporadic exploration since 1913 has failed to reveal other ore deposits of economic importance.

Corrective Action Decision Document/Corrective Action Plan for Corrective Action Unit 413: Clean Slate II Plutonium Dispersion (TTR) Tonopah Test Range, Nevada. Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthews, Patrick

This Corrective Action Decision Document/Corrective Action Plan provides the rationale and supporting information for the selection and implementation of corrective actions at Corrective Action Unit (CAU) 413, Clean Slate II Plutonium Dispersion (TTR). CAU 413 is located on the Tonopah Test Range and includes one corrective action site, TA-23-02CS. CAU 413 consists of the release of radionuclides to the surface and shallow subsurface from the Clean Slate II (CSII) storage–transportation test conducted on May 31, 1963. The CSII test was a non-nuclear detonation of a nuclear device located inside a concrete bunker covered with 2 feet of soil. To facilitatemore » site investigation and the evaluation of data quality objectives decisions, the releases at CAU 413 were divided into seven study groups: 1 Undisturbed Areas 2 Disturbed Areas 3 Sedimentation Areas 4 Former Staging Area 5 Buried Debris 6 Potential Source Material 7 Soil Mounds Corrective action investigation (CAI) activities, as set forth in the CAU 413 Corrective Action Investigation Plan, were performed from June 2015 through May 2016. Radionuclides detected in samples collected during the CAI were used to estimate total effective dose using the Construction Worker exposure scenario. Corrective action was required for areas where total effective dose exceeded, or was assumed to exceed, the radiological final action level (FAL) of 25 millirem per year. The results of the CAI and the assumptions made in the data quality objectives resulted in the following conclusions: The FAL is exceeded in surface soil in SG1, Undisturbed Areas; The FAL is assumed to be exceeded in SG5, Buried Debris, where contaminated debris and soil were buried after the CSII test; The FAL is not exceeded at SG2, SG3, SG4, SG6, or SG7. Because the FAL is exceeded at CAU 413, corrective action is required and corrective action alternatives (CAAs) must be evaluated. For CAU 413, three CAAs were evaluated: no further action, clean closure, and closure in place. The CAAs were evaluated on technical merit focusing on performance, reliability, feasibility, safety, and cost. Based on the evaluation of analytical data from the CAI, review of future and current operations at CAU 413, and the detailed and comparative analysis of CAAs, clean closure was selected as the preferred CAA for CAU 413 by the U.S. Air Force, Nevada Division of Environmental Protection, and U.S. Department of Energy at the CAA meeting held on August 24, 2016.« less

Examining the Role of Metadata in Testing IED Detection Systems

DTIC Science & Technology

2009-09-01

energy management, crop assessment, weather forecasting, disaster alerts, and endangered species assessment [ Biagioni and Bridges 2002; Main- waring et...accessed June 10, 2008). Biagioni , E. and K. Bridges. 2002. The application of remote sensor technology to assist the recovery of rare endangered species

Long-Term Storage Studies on Dehydrated Ration Items and Food Packets

DTIC Science & Technology

1976-06-01

and onions, bacon, corn, fruit salad, steamed fruitcake, chocolate nut bread, plums, rolled oats, raspberry and strawberry Jams , and one brand of... strawberry jam , biscuit spread, and canned peachsa ware unacceptable; scores for chocolate bera, beef and apaghetti, chicksn soup, canned plums

Research on corrosion mechanism of suspension insulator steel foot of direct current system and measures for corrosion inhibition

NASA Astrophysics Data System (ADS)

Chen, He; Yang, Yueguang; Su, Guolei; Wang, Xiaoqing; Zhang, Hourong; Sun, Xiaoyu; Fan, Youping

2017-09-01

There are increasingly serious electrocorrosion phenomena on insulator hardware caused by direct current transmission due to the wide-range popularization of extra high voltage direct current transmission engineering in our country. Steel foot corrosion is the main corrosion for insulators on positive polarity side of transmission lines. On one hand, the corrosion leads to the tapering off of steel foot diameter, having a direct influence on mechanical property of insulators; on the other hand, in condition of corrosion on steel foot wrapped in porcelain ware, the volume of the corrosion product is at least 50% more than that of the original steel foot, leading to bursting of porcelain ware, threatening safe operation of transmission lines. Therefore, it is necessary to conduct research on the phenomenon and propose feasible measures for corrosion inhibition. Starting with the corrosion mechanism, this article proposes two measures for corrosion inhibition, and verifies the inhibition effect in laboratory conditions, providing reference for application in engineering.

Original Courseware for Introductory Psychology: Implementation and Evaluation.

ERIC Educational Resources Information Center

Slotnick, Robert S.

1988-01-01

Describes the implementation and field testing of PsychWare, a courseware package for introductory psychology developed and field tested at New York Institute of Technology. Highlights include the courseware package (10 software programs, a faculty manual, and a student workbook), and instructional design features (simulations, real-time…

Language Development and Scaffolding in a Sino-American Telecollaborative Project

ERIC Educational Resources Information Center

Jin, Li

2013-01-01

Previous research (e.g., Belz & Thorne, 2006; Ware & O'Dowd, 2008) has discovered that language learning can be afforded through intercultural telecollaboration. From a sociocultural theoretical perspective, the current study investigated the language development outcomes and process in a 10-week Sino-American telecollaborative project…

33 CFR 101.105 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... without containers or labels, and that is received and handled without mark or count. Bunkers means a..., part A. Cargo means any goods, wares, or merchandise carried, or to be carried, for consideration... interested in the vessel, facility, or OCS facility, except dredge spoils. Cargo vessel means a vessel that...

33 CFR 101.105 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... without containers or labels, and that is received and handled without mark or count. Bunkers means a..., part A. Cargo means any goods, wares, or merchandise carried, or to be carried, for consideration... interested in the vessel, facility, or OCS facility, except dredge spoils. Cargo vessel means a vessel that...

33 CFR 101.105 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... without containers or labels, and that is received and handled without mark or count. Bunkers means a..., part A. Cargo means any goods, wares, or merchandise carried, or to be carried, for consideration... interested in the vessel, facility, or OCS facility, except dredge spoils. Cargo vessel means a vessel that...

33 CFR 101.105 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... without containers or labels, and that is received and handled without mark or count. Bunkers means a..., part A. Cargo means any goods, wares, or merchandise carried, or to be carried, for consideration... interested in the vessel, facility, or OCS facility, except dredge spoils. Cargo vessel means a vessel that...

Global demand for rare earth resources and strategies for green mining

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dutta, Tanushree

Rare earth elements (REEs) are essential raw materials for emerging renewable energy resources and ‘smart’ electronic devices. Global REE demand is slated to grow at an annual rate of 5% by 2020. This high growth rate will require a steady supply base of REEs in the long run. At present, China is responsible for 85% of global rare earth oxide (REO) production. To overcome this monopolistic supply situation, new strategies and investments are necessary to satisfy domestic supply demands. Concurrently, environmental, economic, and social problems arising from REE mining must be addressed. There is an urgent need to develop efficientmore » REE recycling techniques from end-of-life products, technologies to minimize the amount of REEs required per unit device, and methods to recover them from fly ash or fossil fuel-burning wastes.« less

Global demand for rare earth resources and strategies for green mining.

PubMed

Dutta, Tanushree; Kim, Ki-Hyun; Uchimiya, Minori; Kwon, Eilhann E; Jeon, Byong-Hun; Deep, Akash; Yun, Seong-Taek

2016-10-01

Rare earth elements (REEs) are essential raw materials for emerging renewable energy resources and 'smart' electronic devices. Global REE demand is slated to grow at an annual rate of 5% by 2020. This high growth rate will require a steady supply base of REEs in the long run. At present, China is responsible for 85% of global rare earth oxide (REO) production. To overcome this monopolistic supply situation, new strategies and investments are necessary to satisfy domestic supply demands. Concurrently, environmental, economic, and social problems arising from REE mining must be addressed. There is an urgent need to develop efficient REE recycling techniques from end-of-life products, technologies to minimize the amount of REEs required per unit device, and methods to recover them from fly ash or fossil fuel-burning wastes. Copyright © 2016 Elsevier Inc. All rights reserved.

Coarsening Experiment Being Prepared for Flight

NASA Technical Reports Server (NTRS)

Hickman, J. Mark

2001-01-01

The Coarsening in Solid-Liquid Mixtures-2 (CSLM-2) experiment is a materials science space flight experiment whose purpose is to investigate the kinetics of competitive particle growth within a liquid matrix. During coarsening, small particles shrink by losing atoms to larger particles, causing the larger particles to grow. In this experiment, solid particles of tin will grow (coarsen) within a liquid lead-tin eutectic matrix. The preceding figures show the coarsening of tin particles in a lead-tin eutectic as a function of time. By conducting this experiment in a microgravity environment, we can study a greater range of solid volume fractions, and the effects of sedimentation present in terrestrial experiments will be negligible. The CSLM-2 experiment is slated to fly onboard the International Space Station. The experiment will be run in the Microgravity Science Glovebox installed in the U.S. Laboratory module.

Look What the Cat Brought In.

ERIC Educational Resources Information Center

Erslev, Carole

1984-01-01

The small, uneaten, slate-gray, pointed-nose animal that is distasteful to the cat because of foul-tasting scent glands is the shrew. Describes the short-tailed shrew's physical characteristics, lifespan, habitat, eating habits, and senses. (ERB)

29 CFR 452.112 - Form of ballot; slate voting.

Code of Federal Regulations, 2014 CFR

2014-07-01

... this is permissible under the union's constitution and bylaws. A determination as to the position of a... constitution and bylaws, consistent with the requirement of fairness and the other provisions of the Act. For...

29 CFR 452.112 - Form of ballot; slate voting.

Code of Federal Regulations, 2013 CFR

2013-07-01

... this is permissible under the union's constitution and bylaws. A determination as to the position of a... constitution and bylaws, consistent with the requirement of fairness and the other provisions of the Act. For...

29 CFR 452.112 - Form of ballot; slate voting.

Code of Federal Regulations, 2012 CFR

2012-07-01

... this is permissible under the union's constitution and bylaws. A determination as to the position of a... constitution and bylaws, consistent with the requirement of fairness and the other provisions of the Act. For...

29 CFR 452.112 - Form of ballot; slate voting.

Code of Federal Regulations, 2010 CFR

2010-07-01

... this is permissible under the union's constitution and bylaws. A determination as to the position of a... constitution and bylaws, consistent with the requirement of fairness and the other provisions of the Act. For...

Computer Tutors Get Personal

ERIC Educational Resources Information Center

Johnson, David L.

2005-01-01

After decades of research in artificial intelligence (AI) and cognitive psychology, a number of companies have emerged that offer intelligent tutor system (ITS) soft ware to schools. These systems try to mimic the help that a human tutor would provide to an individual student, something nearly impossible for teachers to accomplish in the…

MOOCs, High Technology, and Higher Learning

ERIC Educational Resources Information Center

Rhoads, Robert A.

2015-01-01

In "MOOCs, High Technology, and Higher Learning," Robert A. Rhoads places the OpenCourseWare (OCW) movement into the larger context of a revolution in educational technology. In doing so, he seeks to bring greater balance to increasingly polarized discussions of massively open online courses (MOOCs) and show their ongoing relevance to…

26 CFR 301.7304-1 - Penalty for fraudulently claiming drawback.

Code of Federal Regulations, 2010 CFR

2010-04-01

... drawback on goods, wares, or merchandise on which no internal tax shall have been paid, or fraudulently claims any greater allowance of drawback than the tax actually paid, he shall forfeit triple the amount....7304-1 Section 301.7304-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY...

Developing Intercultural Communicative Competence through Online Exchanges

ERIC Educational Resources Information Center

Chun, Dorothy M.

2011-01-01

Based on Byram's (1997) definition of intercultural communicative competence (ICC) and on specific types of discourse analysis proposed by Kramsch and Thorne (2002) and Ware and Kramsch (2005), this article explores how online exchanges can play a role in second language learners' development of pragmatic competence and ICC. With data obtained…

Analysis of Learning Achievement and Teacher-Student Interactions in Flipped and Conventional Classrooms

ERIC Educational Resources Information Center

Sun, Jerry Chih-Yuan; Wu, Yu-Ting

2016-01-01

This study aimed to investigate the effectiveness of two different teaching methods on learning effectiveness. OpenCourseWare was integrated into the flipped classroom model (experimental group) and distance learning (control group). Learning effectiveness encompassed learning achievement, teacher-student interactions, and learning satisfaction.…

7 CFR 2902.52 - Disposable tableware.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 15 2011-01-01 2011-01-01 false Disposable tableware. 2902.52 Section 2902.52 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF ENERGY POLICY AND NEW USES... and used in dining, such as drink ware and dishware, including but not limited to cups, plates, bowls...

Contributory Factors to Teachers' Sense of Community in Public Urban Elementary Schools

ERIC Educational Resources Information Center

Kirkhus, Debra

2011-01-01

The purpose of this study was to investigate factors that contribute to teachers' sense of community within public, urban, elementary schools. Because previous research has touted the benefits of teacher communities within schools (Kruse, 2001; Leana & Pil, 2006; Ware & Kitsantas, 2007) educational leaders are challenged with creating…

The Hard(ware) Choice

ERIC Educational Resources Information Center

Demski, Jennifer

2012-01-01

When it comes to implementing a large-scale 1-to-1 computing initiative, deciding which device students will use every day to support their learning requires a significant amount of thought and research. Laptop, netbook, Chromebook, tablet--each device has enough similarities to make the decision seem easy, but enough differences to make a big…

40 CFR 63.11436 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2010 CFR

2010-07-01

... CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Clay Ceramics... subpart cover? (a) This subpart applies to any existing or new affected source located at a clay ceramics... glazed ceramic ware located at a clay ceramics manufacturing facility. (c) An affected source is existing...

40 CFR 63.11441 - What are the notification requirements?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Clay Ceramics Manufacturing Area... glazed ceramic ware, you must certify that you are maintaining the peak temperature below 1540 °C (2800... ceramics manufacturing facility that uses more than 227 Mg/yr (250 tpy) of wet glaze(s), you must certify...

40 CFR 63.11435 - Am I subject to this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) National Emission Standards for Hazardous Air Pollutants for Clay Ceramics Manufacturing Area Sources... if you own or operate a clay ceramics manufacturing facility (as defined in § 63.11444), with an atomized glaze spray booth or kiln that fires glazed ceramic ware, that processes more than 45 megagrams...

Using Simulation Module, PCLAB, for Steady State Disturbance Sensitivity Analysis in Process Control

ERIC Educational Resources Information Center

Ali, Emad; Idriss, Arimiyawo

2009-01-01

Recently, chemical engineering education moves towards utilizing simulation soft wares to enhance the learning process especially in the field of process control. These training simulators provide interactive learning through visualization and practicing which will bridge the gap between the theoretical abstraction of textbooks and the…

Parents' Perception on De La Salle University-Dasmarinas Services

ERIC Educational Resources Information Center

Cortez-Antig, Carmelyn

2011-01-01

The study was conducted to find out the parents' perception on the De La Salle University-Dasmarinas services which are grouped as follows: (1) Academic instruction factor; (2) Quality of human ware (includes faculty, administration, staff support through medical services, guidance and discipline); (3) Quality of hardware (dorm facilities,…

Pressures on TV Programs: Coalition for Better Television's Case.

ERIC Educational Resources Information Center

Shipman, John M., Jr.

In 1981, the conservative Coalition for Better Television (CBTV) threatened an economic boycott against advertisers who marketed their wares on programs that the coalition felt had excessive sex and violence. Because television networks are dependent on advertising, the coalition believed economic pressure on advertisers would force a…

77 FR 52313 - Notice of Scope Rulings

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

..., 2012. A-570-506: Porcelain-On-Steel Cooking Ware from the People's Republic of China Requestor: The Coleman Company, Inc.; the stockpot locking lid of its Signature Series All-In-One Cooking System And Max Series is within the scope of the antidumping duty order; the stockpot cooking base of its Signature...

Effectiveness of Existing Eye Safety Legislation in Arizona.

ERIC Educational Resources Information Center

Gillaspy, Roy Eugene

This study was designed to ascertain the current practices of eye safety in Arizona high school industrial education laboratories, including the enforcement of eye safety legislation, use of eye protection devices, how the eye ware meets the American National Standards Institute specifications, and the teachers' interpretations of the existing eye…

Self-Taught Visually-Guided Pointing for a Humanoid Robot

DTIC Science & Technology

2006-01-01

Brooks, R., Bryson, J., Marjanovic , M., Stein, L. A., & Wessler, M. (1996), Humanoid Soft- ware, Technical report, MIT Arti cial Intelli- gence Lab...8217, Journal of Biomechanics 19, 231{238. Marjanovic , M. (1995), Learning Functional Maps Between Sensorimotor Systems on a Humanoid Robot, Master’s thesis, MIT

Computer-Mediated Corrective Feedback and Language Accuracy in Telecollaborative Exchanges

ERIC Educational Resources Information Center

Vinagre, Margarita; Munoz, Beatriz

2011-01-01

Recent studies illustrate the potential that intercultural telecollaborative exchanges entail for language development through the use of corrective feedback from collaborating partners (Kessler, 2009; Lee, 2008; Sauro, 2009; Ware & O'Dowd, 2008). We build on this growing body of research by presenting the findings of a three-month-long…

An Analysis of Hope as a Psychological Strength

ERIC Educational Resources Information Center

Valle, Michael F.; Huebner, E. Scott; Suldo, Shannon M.

2006-01-01

Psychologists have placed an increased emphasis on identifying psychological strengths that foster healthy development. Hope, as operationalized in Snyder's hope theory [Snyder, C. R., Hoza, B., Pelham, W. E., Rapoff, M., Ware, L., & Danovsky, M., et al. (1997). The development and validation of the children's hope scale. "Journal of Pediatric…

5 CFR Appendix C to Subpart B of... - Appropriated Fund Wage and Survey Areas

Code of Federal Regulations, 2012 CFR

2012-01-01

... Thomas Tift Turner Ware Atlanta Survey Area Georgia: Butts Cherokee Clayton Cobb De Kalb Douglas Fayette... Elbert Emanuel Glascock Hart Jefferson Jenkins Lincoln Taliaferro Warren Wilkes South Carolina: Allendale... Thomas Trego Wallace Wichita Wilson Woodson Kentucky Lexington Survey Area Kentucky: Bourbon Clark...

5 CFR Appendix C to Subpart B of... - Appropriated Fund Wage and Survey Areas

Code of Federal Regulations, 2014 CFR

2014-01-01

... Thomas Tift Turner Ware Atlanta Survey Area Georgia: Butts Cherokee Clayton Cobb De Kalb Douglas Fayette... Elbert Emanuel Glascock Hart Jefferson Jenkins Lincoln Taliaferro Warren Wilkes South Carolina: Allendale... Thomas Trego Wallace Wichita Wilson Woodson Kentucky Lexington Survey Area Kentucky: Bourbon Clark...

5 CFR Appendix C to Subpart B of... - Appropriated Fund Wage and Survey Areas

Code of Federal Regulations, 2013 CFR

2013-01-01

... Thomas Tift Turner Ware Atlanta Survey Area Georgia: Butts Cherokee Clayton Cobb De Kalb Douglas Fayette... Elbert Emanuel Glascock Hart Jefferson Jenkins Lincoln Taliaferro Warren Wilkes South Carolina: Allendale... Thomas Trego Wallace Wichita Wilson Woodson Kentucky Lexington Survey Area Kentucky: Bourbon Clark...

Nonlinear optical polymers for electro-optic signal processing

NASA Technical Reports Server (NTRS)

Lindsay, Geoffrey A.

1991-01-01

Photonics is an emerging technology, slated for rapid growth in communications systems, sensors, imagers, and computers. Its growth is driven by the need for speed, reliability, and low cost. New nonlinear polymeric materials will be a key technology in the new wave of photonics devices. Electron-conjubated polymeric materials offer large electro-optic figures of merit, ease of processing into films and fibers, ruggedness, low cost, and a plethora of design options. Several new broad classes of second-order nonlinear optical polymers were developed at the Navy's Michelson Laboratory at China Lake, California. Polar alignment in thin film waveguides was achieved by electric-field poling and Langmuir-Blodgett processing. Our polymers have high softening temperatures and good aging properties. While most of the films can be photobleached with ultraviolet (UV) light, some have excellent stability in the 500-1600 nm range, and UV stability in the 290-310 nm range. The optical nonlinear response of these polymers is subpicosecond. Electro-optic switches, frequency doublers, light modulators, and optical data storage media are some of the device applications anticipated for these polymers.

Reconnaissance for radioactive deposits in the vicinity of Teller and Cape Nome, Seward Peninsula, Alaska, 1946-47

USGS Publications Warehouse

White, Max Gregg; West, W.S.; Matzko, J.J.

1953-01-01

Placer-mining areas and bedrock exposures near Teller on the Seward Peninsula, Alaska, were investigated in June and July, 1946, for possible sources of radioactive materials. The areas that were investigated are: Dese Creek, southeast of Teller; Bluestone River basin, south and southeast of Teller; Sunset Creek and other small streams flowing south into Grantley Harbor, northeast of Teller; and, also northeast of Teller, Swanson Creek and its tributaries, which flow north into the Agiapuk River basin. No significant amount of radioactive material was found, either in the stream gravels or in the bedrock of any of the areas. A heavy-mineral fraction obtained from a granite boulder probably derived from a bench gravel on Gold Run contains 0. 017 percent equivalent uranium, but the radioactivity is due to allanite and zircon. The types of bedrock tested include schist, slate, and greenstone. Readings on fresh surfaces of rock were the same as, or only slightly above the background count. The maximum radioactivity in stream concentrates is 0. 004 percent equivalent uranium in a sluice concentrate from Sunset Creek.

Performance of three aggregates on all-weather roads.

DOT National Transportation Integrated Search

1985-01-01

Because the Virginia Department of Highways and Transportation had received complaints from the public and Department maintenance personnel concerning the durability of slate used on all-weather surface roadways, a field study was conducted in which ...

Transportation infrastructure : highway pavement design guide is outdated

DOT National Transportation Integrated Search

1997-11-01

The Federal Highway Administration has worked cooperatively with the : American Association of State Highway and Transportation Officials in : developing and updating the pavement design guide. The current guide is : slated to be updated by the year ...

ScienceCast 117: NASA Mission Seeks Lunar Air

NASA Image and Video Library

2013-08-29

A NASA spacecraft slated for launch in September will fly to the Moon to investigate the tenuous lunar atmosphere. Researchers hope "LADEE" will solve a mystery that has been puzzling them since the days of Apollo.

KENNEDY SPACE CENTER, FLA. - In the Payload Hazardous Servicing Facility at KSC, installation is under way of the Mars Orbiter Camera (MOC) on the Mars Global Surveyor spacecraft. The MOC is one of a suite of six scientific instruments that will gather data about Martian topography, mineral distribution and weather during a two-year period. The Mars Global Surveyor is slated for launch aboard a Delta II expendable launch vehicle on Nov. 6, the beginning of a 20-day launch period.

NASA Image and Video Library

1996-08-19

KENNEDY SPACE CENTER, FLA. - In the Payload Hazardous Servicing Facility at KSC, installation is under way of the Mars Orbiter Camera (MOC) on the Mars Global Surveyor spacecraft. The MOC is one of a suite of six scientific instruments that will gather data about Martian topography, mineral distribution and weather during a two-year period. The Mars Global Surveyor is slated for launch aboard a Delta II expendable launch vehicle on Nov. 6, the beginning of a 20-day launch period.

Geological mapping and analysis in determining resource recitivity limestone rocks in the village of Mersip and surrounding areas, district Limun, Sorolangun Regency, Jambi Province

NASA Astrophysics Data System (ADS)

Dona, Obie Mario; Ibrahim, Eddy; Susilo, Budhi Kuswan

2017-11-01

The research objective is to describe potential, to analyze the quality and quantity of limestone, and to know the limit distribution of rocks based on the value of resistivity, the pattern of distribution of rocks by drilling, the influence mineral growing on rock against resistivity values, the model deposition of limestone based on the value resistivity of rock and drilling, and the comparison between the interpretation resistivity values based on petrographic studies by drilling. Geologic Formations study area consists of assays consisting of altered sandstone, phyllite, slate, siltstone, grewake, and inset limestone. Local quartz sandstone, schist, genealogy, which is Member of Mersip Stylists Formation, consists of limestone that formed in shallow seas. Stylists Formation consists of slate, shale, siltstone and sandstone. This research methodology is quantitative using experimental observation by survey. This type of research methodology by its nature is descriptive analysis.

78 FR 10172 - Lisa Anne Cornell and G. Ware Cornell, Jr. v. Princess Cruise Lines, Ltd. (Corp), Carnival PLC...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-13

.... Princess Cruise Lines, Ltd. (Corp), Carnival PLC, and Carnival Corporation; Notice of Filing of Complaint...,'' against Princess Cruise Lines, Ltd (Corp), Carnival plc, and Carnival Corporation hereinafter... from ports in the United States;'' Respondent Carnival plc ``is a corporation established under the...

VFDs: Are They Electrical Parasites?

ERIC Educational Resources Information Center

Frank, Ned

2013-01-01

Variable Frequency Drives (VFDs) are electronic speed controllers used mainly to modulate and reduce the overall speed and power consumption of an electrical motor. They can be used as soft starters for equipment that has a large rotational mass, thus reducing belt ware and large electrical peaks when starting large pieces of equipment. VFDs have…

Johns Hopkins Bloomberg School of Public Health OpenCourseWare

ERIC Educational Resources Information Center

Kanchanaraksa, Sukon; Gooding, Ira; Klaas, Brian; Yager, James D.

2009-01-01

The need for public health knowledge is ever increasing, but the educational options have been limited to coursework delivered by academics to individuals who can afford the cost of tuition at public health institutions. To overcome this disparity, Johns Hopkins Bloomberg School of Public Health (JHSPH) has joined the Massachusetts Institute of…

Fiestaware as an Icon in the Popular Culture of America.

ERIC Educational Resources Information Center

Dale, Sharon; Dale, J. Alexander

Fiestaware, the brightly colored dinnerware first introduced in the United States in 1936, has been a cultural phenomenon from its inception. This paper seeks to explain the extraordinary popularity of Fiestaware and to understand the role the ware occupies in U.S. popular culture. Fiestaware achieved enormous success, in spite of its introduction…

The Impact of Standards-Based Reform: Applying Brantlinger's Critique of "Hierarchical Ideologies"

ERIC Educational Resources Information Center

Bacon, Jessica; Ferri, Beth

2013-01-01

Brantlinger's [2004b. "Ideologies Discerned, Values Determined: Getting past the Hierarchies of Special Education." In "Ideology and the Politics of (in)Exclusion," edited by L. Ware, 11-31. New York: Peter Lang Publishing] critique of hierarchical ideologies lays bare the logics embedded in standards-based reform. Drawing on…

Range Environmental Assessment for Test Area C-52 Complex, Eglin Air Force Base, Florida

DTIC Science & Technology

2014-10-31

tourism in the region. Promotes and develops general business, trade, and tourism components of the state economy. Chapter 334 Transportation...sale in BWB. 124 Canterbury Circle. Sat. Aug. 23rd, 8am-2pm. Sports equip, house- wares, books, puzzles, linens, glassware, all must go! Indoor sale

Teaching Undergraduate Software Engineering Using Open Source Development Tools

DTIC Science & Technology

2012-01-01

ware. Some example appliances are: a LAMP stack, Redmine, MySQL database, Moodle, Tom- cat on Apache, and Bugzilla. Some of the important features...Ada, C, C++, PHP , Py- thon, etc., and also supports a wide range of SDKs such as Google’s Android SDK and the Google Web Toolkit SDK. Additionally

CrossTalk: The Journal of Defense Software Engineering. Volume 19, Number 11

DTIC Science & Technology

2006-11-01

8>. 7. Wallace, Delores R. Practical Soft- ware Reliability Modeling. Proc. of the 26th Annual NASA Goddard Software Engineering Workshop, Nov. 2001...STAR WARS TO STAR TREK To Request Back Issues on Topics Not Listed Above, Please Contact <stsc. customerservice@hill.af.mil>. About the Authors Kym

The Educational Situation in Utopia: Why "What Is," Is

ERIC Educational Resources Information Center

Seaman, Jayson; Quay, John

2015-01-01

In this response to Molly Ware's review of our 2013 book, "John Dewey and Education Outdoors," we extend her suggestion that complexity be regarded as an important, generative force in education reform. Drawing on Dewey's 1933 "Utopian Schools" speech, we discuss the "level deeper" that Dewey sought as he…

Response Acquisition under Targeted Percentile Schedules: A continuing Quandary for Molar Models of Operant Behavior

DTIC Science & Technology

1993-07-01

dimensions topics such as timing (e.g., Gibbon & Allan, from interresponse-time duration (e.g.. Alle- 1984), numerositv (e.g., Gallistel , 1989), and...Behavior, 51, 145-162. Snapper, A. G., & Inglis, G. B. (1985). SKED-li soft- Gallistel , C. R. (1989). Animal cognition: The repre- ware system. Kalamazoo

Used Jmol to Help Students Better Understand Fluxional Processes

ERIC Educational Resources Information Center

Coleman, William F.; Fedosky, Edward W.

2006-01-01

This new WebWare combines instructional text and Jmol interactive, animated illustrations that help students visualize the mechanism. It is concluded that by animating the fluxional behavior of a simple model for chiral metal catalyst Sn(amidinate)[subscript 2], in which axial/equatorial exchange within the amidinate rings occurs through a Berry…

EXTERIOR VIEW, LOOKING SOUTHEAST, WITH FRONT FACADE AND PORCH. FREE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

EXTERIOR VIEW, LOOKING SOUTHEAST, WITH FRONT FACADE AND PORCH. FREE STANDING BRICK GABLED ROOF SHOWS EVIDENCE OF RECENT FIRE WHICH PARTIALLY DESTROYED THE PROPERTY WHICH WAS BUILT IN THE 1840S FOR THE THEN IRON MASTER HORACE WARE. - Shelby Iron Works, Iron Master's House, County Road 42, Shelby, Shelby County, AL

Hydrogeologic data from the US Geological Survey test wells near Waycross, Ware County, Georgia

USGS Publications Warehouse

Matthews, S.E.; Krause, R.E.

1983-01-01

Two wells were constructed near Waycross, Ware County, Georgia, from July 1980 to May 1981 to collect stratigraphic, structural, geophysical, hydrologic, hydraulic, and geochemical information for the U.S. Geological Survey Tertiary Limestone Regional Aquifer-System Analysis. Data collection included geologic sampling and coring, borehole geophysical logging, packer testing, water-level measuring, water-quality sampling, and aquifer testing. In the study area, the Tertiary limestone aquifer system is about 1,300 feet thick and is confined and overlain by about 610 feet of clastic sediments. The aquifer system consists of limestone, dolomite, and minor evaporites and has high porosity and permeability. A 4-day continuous discharge aquifer test was conducted, from which a transmissivity of about 1 million feet squared per day and a storage coefficient of 0.0001 were calculated. Water from the upper part of the aquifer is of a calcium bicarbonate type. The deeper highly mineralized zone produces a sodium bicarbonate type water in which concentrations of magnesium, sulfate, chloride, sodium, and some trace metals increase with depth. (USGS)

Effects of soda-lime-silica waste glass on mullite formation kinetics and micro-structures development in vitreous ceramics.

PubMed

Marinoni, Nicoletta; D'Alessio, Daniela; Diella, Valeria; Pavese, Alessandro; Francescon, Ferdinando

2013-07-30

The effects of soda-lime waste glass, from the recovery of bottle glass cullet, in partial replacement of Na-feldspar for sanitary-ware ceramic production are discussed. Attention is paid to the mullite growth kinetics and to the macroscopic properties of the final output, the latter ones depending on the developed micro-structures and vitrification grade. Measurements have been performed by in situ high temperature X-ray powder diffraction, scanning electron microscopy, thermal dilatometry, water absorption and mechanical testing. Glass substituting feldspar from 30 to 50 wt% allows one (i) to accelerate the mullite growth reaction kinetics, and (ii) to achieve macroscopic features of the ceramic output that comply with the latest technical requirements. The introduction of waste glass leads to (i) a general saving of fuel and reduction of the CO2-emissions during the firing stage, (ii) a preservation of mineral resources in terms of feldspars, and (iii) an efficient management of the bottle glass refuse by readdressing a part of it in the sanitary-ware manufacturing. Copyright © 2013 Elsevier Ltd. All rights reserved.

The educational situation in Utopia: why what is, is

NASA Astrophysics Data System (ADS)

Seaman, Jayson; Quay, John

2015-03-01

In this response to Molly Ware's review of our 2013 book, John Dewey and Education Outdoors, we extend her suggestion that complexity be regarded as an important, generative force in education reform. Drawing on Dewey's 1933 Utopian Schools speech, we discuss the "level deeper" that Dewey sought as he criticized the method/subject mater dichotomy, which he saw as an artifact of social class carried forward in the form of a curricular debate rather than a natural source of tension that would be productive to democratic education. Dewey radically argued that learning itself contained similar anti-democratic potential. Eschewing the false child versus curriculum dichotomy, Dewey believed complexity as a catalyst for educational action would be achieved by engaging children in historically formed occupations, harnessing the forces that drive technological and cultural evolution in order to spur interest, effort, and the formation of social attitudes among students. Following Ware, we suggest that reformers should seek to understand at a lever deeper the many sources of complexity they encounter as they both challenge and honor what is.

The role of turbulent suppression in the triggering ITBs on C-Mod

NASA Astrophysics Data System (ADS)

Zhurovich, K.; Fiore, C. L.; Ernst, D. R.; Bonoli, P. T.; Greenwald, M. J.; Hubbard, A. E.; Hughes, J. W.; Marmar, E. S.; Mikkelsen, D. R.; Phillips, P.; Rice, J. E.

2007-11-01

Internal transport barriers can be routinely produced in C-Mod steady EDA H-mode plasmas by applying ICRF at |r/a|>= 0.5. Access to the off-axis ICRF heated ITBs may be understood within the paradigm of marginal stability. Analysis of the Te profiles shows a decrease of R/LTe in the ITB region as the RF resonance is moved off axis. Ti profiles broaden as the ICRF power deposition changes from on-axis to off-axis. TRANSP calculations of the Ti profiles support this trend. Linear GS2 calculations do not reveal any difference in ETG growth rate profiles for ITB vs. non-ITB discharges. However, they do show that the region of stability to ITG modes widens as the ICRF resonance is moved outward. Non-linear simulations show that the outward turbulent particle flux exceeds the Ware pinch by factor of 2 in the outer plasma region. Reducing the temperature gradient significantly decreases the diffusive flux and allows the Ware pinch to peak the density profile. Details of these experiments and simulations will be presented.

Migration of formaldehyde from melamine-ware: UK 2008 survey results.

PubMed

Potter, E L J; Bradley, E L; Davies, C R; Barnes, K A; Castle, L

2010-06-01

Fifty melamine-ware articles were tested for the migration of formaldehyde - with hexamethylenetetramine (HMTA) expressed as formaldehyde - to see whether the total specific migration limit (SML(T)) was being observed. The SML(T), given in European Commission Directive 2002/72/EC as amended, is 15 mg kg(-1). Fourier transform-infrared (FT-IR) spectroscopy was carried out on the articles to confirm the plastic type. Articles were exposed to the food simulant 3% (w/v) aqueous acetic acid under conditions representing their worst foreseeable use. Formaldehyde and HMTA in food simulants were determined by a spectrophotometric derivatization procedure. Positive samples were confirmed by a second spectrophotometric procedure using an alternative derivatization agent. As all products purchased were intended for repeat use, three sequential exposures to the simulant were carried out. Formaldehyde was detected in the simulant exposed to 43 samples. Most of the levels found were well below the limits set in law such that 84% of the samples tested were compliant. However, eight samples had formaldehyde levels that were clearly above the legal maximum at six to 65 times the SML(T).

12. Oblique view of northeast facade, showing missing rain gutter, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

12. Oblique view of northeast facade, showing missing rain gutter, deteriorated slate roof, broken windows in tower; view west-northwest, 90mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

Study on the Particle Size Distribution Nano-Particles of Mining Minerals on Whiteness of Triaxial Body

NASA Astrophysics Data System (ADS)

Mathur, Ravi; Soni, Aditi

White wares produced worldwide represent the foundation of much of the ceramic industry; Porcelain bodies fabricated from triaxial mixtures of clay, quartz and feldspar with different size and amounts of nano particles were investigated. Although the purity of raw materials has a strong effect on the colour of the fired bodies, the particle size of raw materials also effect the whiteness The raw material mining minerals china Clay, Feldspar, quarts were prepared of various sized nano particles contains 10.60 -20.22%, 56.84- 70.80 % and 34.87-50.76 % of 100nm respectively. The fired bodies of raw mining minerals and triaxial bodies were subjected to colour measurement. The differences in whiteness were compared and discussed. The studies so far carried out is upto 400 mesh size while the present study has included up to 100nm particle size. A statistical correlation between whiteness of feldspar and triaxial body was also carried out. The correlation between china clay and triaxial body are 0.53, 0.57 and 0.66 for china clay similarly correlation for feldspar is 0.49, 0.73 and 0.83 for triaxial body it are 0.97, 0.84 and 0.75 for A1, A2 and A3 samples. Correlation between china clay and feldspar with triaxial body are 0.79 and 0.92 respectively.

Design and Analysis of Drive Shaft using Kevlar/Epoxy and Glass/Epoxy as a Composite Material

NASA Astrophysics Data System (ADS)

Karthikeyan, P.; Gobinath, R.; Kumar, L. Ajith; Jenish, D. Xavier

2017-05-01

In automobile industry drive shaft is one of the most important components to transmit power form the engine to rear wheel through the differential gear. Generally steel drive shaft is used in automobile industry, nowadays they are more interested to replace steel drive shaft with that of composite drive shaft. The overall objective of this paper is to analyze the composite drive shaft using to find out the best replacement for conventional steel drive shaft. The uses of advanced composite materials such as Kevlar, Graphite, Carbon and Glass with proper resins ware resulted in remarkable achievements in automobile industry because of its greater specific strength and specific modulus, improved fatigue and corrosion resistances and reduction in energy requirements due to reduction in weight as compared to steel shaft. This paper is to presents, the modeling and analysis of drive shaft using Kevlar/Epoxy and Glass/Epoxy as a composite material and to find best replacement for conventional steel drive shafts with an Kevlar/epoxy or Glass/Epoxy resin composite drive shaft. Modeling is done using CATIA software and Analysis is carried out by using ANSYS 10.0 software for easy understanding. The composite drive shaft reduces the weight by 81.67 % for Kevlar/Epoxy and 72.66% for Glass/Epoxy when compared with conventional steel drive shaft.

Estimating the Additional Greenhouse Gas Emissions in Korea: Focused on Demolition of Asbestos Containing Materials in Building

PubMed Central

Kim, Young-Chan; Hong, Won-Hwa; Zhang, Yuan-Long; Son, Byeung-Hun; Seo, Youn-Kyu; Choi, Jun-Ho

2016-01-01

When asbestos containing materials (ACM) must be removed from the building before demolition, additional greenhouse gas (GHG) emissions are generated. However, precedent studies have not considered the removal of ACM from the building. The present study aimed to develop a model for estimating GHG emissions created by the ACM removal processes, specifically the removal of asbestos cement slates (ACS). The second objective was to use the new model to predict the total GHG emission produced by ACM removal in the entire country of Korea. First, an input-equipment inventory was established for each step of the ACS removal process. Second, an energy consumption database for each equipment type was established. Third, the total GHG emission contributed by each step of the process was calculated. The GHG emissions generated from the 1,142,688 ACS-containing buildings in Korea was estimated to total 23,778 tonCO2eq to 132,141 tonCO2eq. This study was meaningful in that the emissions generated by ACS removal have not been studied before. Furthermore, the study deals with additional problems that can be triggered by the presence of asbestos in building materials. The method provided in this study is expected to contribute greatly to the calculation of GHG emissions caused by ACM worldwide. PMID:27626433

Roadmap to MaRIE March 2015

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barnes, Cris William

Los Alamos National Laboratory’s proposed MaRIE facility is slated to introduce the world’s highest energy hard x-ray free electron laser (XFEL). As the light source for the Matter-Radiation Interactions in Extremes experimental facility (MaRIE), the 42-keV XFEL, with bursts of x-ray pulses at gigahertz repetition for studying fast dynamical processes, will help accelerate discovery and design of the advanced materials needed to meet 21st-century national security and energy security challenges. Yet the science of free-electron lasers has a long and distinguished history at Los Alamos National Laboratory (LANL), where for nearly four decades Los Alamos scientists have been performing research,more » design, development, and collaboration work in FEL science. The work at Los Alamos has evolved from low-gain amplifier and oscillator FEL development to highbrightness photoinjector development, and later, self-amplified spontaneous emission (SASE) and high-gain amplifier FEL development.« less

Ambient hemolysis and activation of coagulation is different between HeartMate II and HeartWare left ventricular assist devices.

PubMed

Birschmann, Ingvild; Dittrich, Marcus; Eller, Thomas; Wiegmann, Bettina; Reininger, Armin J; Budde, Ulrich; Strüber, Martin

2014-01-01

Thromboembolic and bleeding events in patients with a left ventricular assist device (LVAD) are still a major cause of complications. Therefore, the balance between anti-coagulant and pro-coagulant factors needs to be tightly controlled. The principle hypothesis of this study is that different pump designs may have an effect on hemolysis and activation of the coagulation system. Referring to this, the HeartMate II (HMII; Thoratec Corp, Pleasanton, CA) and the HeartWare HVAD (HeartWare International Inc, Framingham, MA) were investigated. For 20 patients with LVAD support (n = 10 each), plasma coagulation, full blood count, and clinical chemistry parameters were measured. Platelet function was monitored using platelet aggregometry, platelet function analyzer-100 system ( Siemens, Marburg, Germany), vasodilator-stimulated phosphoprotein phosphorylation assay, immature platelet fraction, platelet-derived microparticles, and von Willebrand diagnostic. Acquired von Willebrand syndrome could be detected in all patients. Signs of hemolysis, as measured by lactate dehydrogenase levels (mean, 470 U/liter HMII, 250 U/liter HVAD; p < 0.001), were more pronounced in the HMII patients. In contrast, D-dimer analysis indicated a significantly higher activation of the coagulation system in HVAD patients (mean, 0.94 mg/liter HMII, 2.01 mg/liter HVAD; p < 0.01). The efficacy of anti-platelet therapy using clopidogrel was not sufficient in more than 50% of the patients. Our results support the finding that all patients with rotary blood pumps suffered from von Willebrand syndrome. In addition, a distinct footprint of effects on hemolysis and the coagulation system can be attributed to different devices. As a consequence, the individual status of the coagulation system needs to be controlled in long-term patients. © 2013 Published by International Society for the Heart and Lung Transplantation on behalf of International Society for Heart and Lung Transplantation.

Identification and Management of Pump Thrombus in the HeartWare Left Ventricular Assist Device System: A Novel Approach Using Log File Analysis.

PubMed

Jorde, Ulrich P; Aaronson, Keith D; Najjar, Samer S; Pagani, Francis D; Hayward, Christopher; Zimpfer, Daniel; Schlöglhofer, Thomas; Pham, Duc T; Goldstein, Daniel J; Leadley, Katrin; Chow, Ming-Jay; Brown, Michael C; Uriel, Nir

2015-11-01

The study sought to characterize patterns in the HeartWare (HeartWare Inc., Framingham, Massachusetts) ventricular assist device (HVAD) log files associated with successful medical treatment of device thrombosis. Device thrombosis is a serious adverse event for mechanical circulatory support devices and is often preceded by increased power consumption. Log files of the pump power are easily accessible on the bedside monitor of HVAD patients and may allow early diagnosis of device thrombosis. Furthermore, analysis of the log files may be able to predict the success rate of thrombolysis or the need for pump exchange. The log files of 15 ADVANCE trial patients (algorithm derivation cohort) with 16 pump thrombus events treated with tissue plasminogen activator (tPA) were assessed for changes in the absolute and rate of increase in power consumption. Successful thrombolysis was defined as a clinical resolution of pump thrombus including normalization of power consumption and improvement in biochemical markers of hemolysis. Significant differences in log file patterns between successful and unsuccessful thrombolysis treatments were verified in 43 patients with 53 pump thrombus events implanted outside of clinical trials (validation cohort). The overall success rate of tPA therapy was 57%. Successful treatments had significantly lower measures of percent of expected power (130.9% vs. 196.1%, p = 0.016) and rate of increase in power (0.61 vs. 2.87, p < 0.0001). Medical therapy was successful in 77.7% of the algorithm development cohort and 81.3% of the validation cohort when the rate of power increase and percent of expected power values were <1.25% and 200%, respectively. Log file parameters can potentially predict the likelihood of successful tPA treatments and if validated prospectively, could substantially alter the approach to thrombus management. Copyright © 2015 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Analysis of melamine migration from melamine food contact articles.

PubMed

Chik, Z; Haron, D E Mohamad; Ahmad, E D; Taha, H; Mustafa, A M

2011-01-01

Migration of melamine has been determined for 41 types of retail melamine-ware products in Malaysia. This study was initiated by the Ministry of Health, Malaysia, in the midst of public anxiety on the possibility of melamine leaching into foods that come into contact with the melamine-ware. Thus, the objective of this study was to investigate the level of melamine migration in melamine utensils available on the market. Samples of melamine tableware, including cups and plates, forks and spoons, tumblers, bowls, etc., were collected from various retail outlets. Following the test guidelines for melamine migration set by the European Committee for Standardisation (CEN 2004) with some modifications, the samples were exposed to two types of food simulants (3% acetic acid and distilled water) at three test conditions (25°C (room temperature), 70 and 100°C) for 30 min. Melamine analysis was carried out using LC-MS/MS with a HILIC column and mobile phase consisting of ammonium acetate/formic acid (0.05%) in water and ammonium acetate/formic acid (0.05%) in acetonitrile (95 : 5, v/v). The limit of quantification (LOQ) was 5 ng/ml. Melamine migration was detected from all samples. For the articles tested with distilled water, melamine migration were [median (interquartile range)] 22.2 (32.6), 49.3 (50.9), 84.9 (89.9) ng/ml at room temperature (25°C), 70 and 100°C, respectively. In 3% acetic acid, melamine migration was 31.5 (35.7), 81.5 (76.2), 122.0 (126.7) ng/ml at room temperature (25°C), 70 and 100°C, respectively. This study suggests that excessive heat and acidity may directly affect melamine migration from melamine-ware products. However the results showed that melamine migration in the tested items were well below the specific migration limit (SML) of 30 mg/kg (30,000 ng/ml) set out in European Commission Directive 2002/72/EC.

Spark plasma sintering synthesis of Ni1-xZnxFe2O4 ferrites: Mössbauer and catalytic study

NASA Astrophysics Data System (ADS)

Velinov, Nikolay; Manova, Elina; Tsoncheva, Tanya; Estournès, Claude; Paneva, Daniela; Tenchev, Krassimir; Petkova, Vilma; Koleva, Kremena; Kunev, Boris; Mitov, Ivan

2012-08-01

Nickel-zinc ferrite nanoparticles, Ni1-xZnxFe2O4 (x = 0, 0.2, 0.5, 0.8, 1.0) were prepared by combination of chemical precipitation and spark plasma sintering (SPS) techniques and conventional thermal treatment of the obtained precursors. The phase composition and structural properties of the obtained materials were investigated by X-ray diffraction and Mössbauer spectroscopy and their catalytic activity in methanol decomposition was tested. A strong effect of reaction medium leading to the transformation of ferrites to a complex mixture of different iron containing phases was detected. A tendency of formation of Fe-carbide was found for the samples synthesized by SPS, while predominantly iron-nickel alloys ware registered in TS obtained samples. The catalytic activity and selectivity in methanol decomposition to CO and methane depended on the current phase composition of the obtained ferrites, which was formed by the influence of the reaction medium.

Opening education.

PubMed

Smith, Marshall S

2009-01-02

Spurred by the publication of Massachusetts Institute of Technology OpenCourseWare in 2002, the open educational resources (OER) movement, which has rapidly expanded and captured the imagination and energy of millions of creators and users throughout the world, now faces many opportunities and substantial challenges as it moves to become an integral part of the world's educational environment. The confluence of the Web and a spirit of sharing intellectual property have fueled a worldwide movement to make knowledge and education materials open to all for use. OER are content (courses, books, lesson plans, articles, etc.), tools (virtual laboratories, simulations, and games), and software that support learning and educational practice. OER are free on the Web, and most have licenses that allow copyright holders to retain ownership while providing specified rights for use in original and modified forms. At the least, OER have helped to level the distribution of knowledge across the world. A second promise of OER is to help transform educational practices. This article explores the history of and promises and challenges for OER.

Reply to "Professionals, Oaths and Flashbacks in the University" by Peodair Leihy

ERIC Educational Resources Information Center

Sharrock, Geoff

2011-01-01

This article presents the author's reply to Peodair Leihy's critique of his paper, "Two Hippocratic oaths for higher education," published in this "Journal" (Sharrock, 2010). In this article, the author focuses on several points of disagreement. The selling of wares is not a defining feature of professional work: many doctors and lawyers, for…

77 FR 56237 - Notice of Permit Applications Received Under the Antarctic Conservation Act of 1978 (Pub. L. 95-541)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

... use commercially available, freeze-dried marine bacterium, Vibrio fisheri, NRRL B-11177, for experimental use at the Crary Science and Engineering Center (CSEC) at McMurdo Station. This bacterium is used... bacterium is used with a reconstituting reagent to determine toxicity levels. All laboratory plastic-ware...

Platelet Glycoprotein Ib-IX and Malignancy

DTIC Science & Technology

2010-09-01

provide a unique microenvironment supporting the accumulation of more platelets and the elaboration of a fibrin - rich network produced by coagulation...process and can initiate the formation of a platelet - rich thrombus by tethering the platelet to a thrombogenic surface. Several ligands binding to GP Ib... Platelet Glycoprotein Ib-IX and Malignancy PRINCIPAL INVESTIGATOR: Jerry Ware, Ph.D

Ball clay

USGS Publications Warehouse

Virta, R.L.

2001-01-01

Part of the 2000 annual review of the industrial minerals sector. A general overview of the ball clay industry is provided. In 2000, sales of ball clay reached record levels, with sanitary ware and tile applications accounting for the largest sales. Ball clay production, consumption, prices, foreign trade, and industry news are summarized. The outlook for the ball clay industry is also outlined.

Grammar Package 1. MicroSIFT Courseware Evaluation.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

THE FOLLOWING IS THE FULL TEXT OF THIS DOCUMENT (Except for the Evaluation Summary Table): VERSION: TRS-80. PRODUCER: Micro Learning Ware, P.O. Box 2134, N. Mankato, MN 56001. EVALUATION COMPLETED: June 22, 1982 by the staff and constituents of the Portland Public Schools, Portland, Oregon. COST: $24.95. ABILITY LEVEL: 4-5. SUBJECT: Language arts.…

Use of Open Educational Resources: How, Why and Why Not?

ERIC Educational Resources Information Center

Islim, Omer Faruk; Gurel Koybasi, Nergis A.; Cagiltay, Kursat

2016-01-01

Open Educational Resources (OER) and OpenCourseWare (OCW) target barriers of education and learning by sharing knowledge for free to benefit self-learners, educators, and students. This study aims to investigate the use of OER both as a supplementary resource for a traditional course and as a resource for self-learners. First, the attitudes and…

The Development and Initial Evaluation of the Human Readiness Level Framework

DTIC Science & Technology

2010-06-01

View ICD Initial Capabilities Document ICW Interactive Course Ware ILE Interactive Learning Environment ILT Instructor Led Training IOC...Programmatic Environmental Safety and Health Evaluation PHA Preliminary Hazard Analysis PHL Preliminary Hazard List xiv PM Program Manager PQS...Occupational Health SOW Statement of Work SRD System Requirements Document SPS System Performance Specification SRR System Requirements Review SVR

Wicked Problems Forum: Immigration and Higher Education: From Me to We: Embracing Coperformative Witnessing and Critical Love in the Classroom

ERIC Educational Resources Information Center

Calafell, Bernadette Marie; Chuang, Andy Kai-chun

2018-01-01

Omar Swartz and Ware McGuffey's essay, "Migrating Pedagogy in American Universities: Cultivating Moral Imagination and Social Justice," available in this issue of "Communication Education," offers an overview of the current landscape in higher education and, in particular, the challenges immigrant students face, historically…

7. Detail, 1885 Sanborn Fire Insurance Map, Carlin, Nevada, in ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. Detail, 1885 Sanborn Fire Insurance Map, Carlin, Nevada, in collection of Nevada Historical Society, Reno; credit Nevada Historical Society. Engine Stores Building is adjacent to R.R. Repair Shop, and is shown containing Library, Cooper Shop, Office, Ware Room, and Boiler & Engine Room. - Southern Pacific Railroad, Carlin Shops, Foot of Sixth Street, Carlin, Elko County, NV

ESPRIT II

DTIC Science & Technology

1990-01-31

and marketing . nological base for the applications, go;ithms, and soft- ware aspects of neurocomputing. The PYGMALION will lead to the coordination of...this by realizing prototypes in two fields systems, system programming, methodology for system of speech application that represent market sectors of...customer rclationrships These demonstrations will ,,c developed and assessed in throughout the internal market by facilitating product close co

Cleveland Metropolitan School District Human Ware Audit: Findings and Recommendations

ERIC Educational Resources Information Center

Osher, David; Poirier, Jeffrey M.; Dwyer, Kevin P.; Hicks, Regenia; Brown, Leah J.; Lampron, Stephanie; Rodriguez, Carlos

2008-01-01

Children and youth require safe and supportive schools and communities if they are to succeed in school and thrive. These needs are particularly great for children who struggle with the impacts of chronic poverty, lead poisoning and lead effect, community and media violence, drugs and alcohol, trauma and loss. There are many such students in…

Learner Behaviour in a MOOC Practice-Oriented Course: In Empirical Study Integrating TAM and TPB

ERIC Educational Resources Information Center

Yang, Hsi-Hsun; Su, Chung-Ho

2017-01-01

Few practice-oriented courses are currently integrated into online learning platforms, such as OpenCourseWare, Khan Academy, and Massive Open Online Courses (MOOCs). It is worthwhile to explore how learners respond to information technology and new teaching methods when practice-oriented course are placed online. Therefore, this study probes…

Student Initiatives and Missed Learning Opportunities in an IRF Sequence: A Single Case Analysis

ERIC Educational Resources Information Center

Li, Houxiang

2013-01-01

Most conversation analysis (CA) studies of the initiation-response-feedback (IRF; Sinclair & Coulthard, 1975) sequence have focused on teacher actions in the feedback move. In this article, I use CA to analyze student initiatives (Waring, 2011) within an IRF sequence in one excerpt from a Chinese as a foreign language class. The excerpt…

Installation Restoration Program. Preliminary Assessment: 186th Tactical Reconnaissance Group, Mississippi Air National Guard, Meridian Airport, Key Field, Meridian, Mississippi

DTIC Science & Technology

1988-10-01

previous directives and meoranda. Although the DOD IRP and the USEPA Superfund pr"gr ware essentially the sase, differences in the definition of progr...Midway and Wilcox inJ Mississimp, Bulletin 102, Mississippi Geologic Research Papers, Mississippi Geological, Ecnomic and Toporapic Survey, 1964. 16

75 FR 62144 - Porcelain-on-Steel Cooking Ware From China and Taiwan; Top-of-the-Stove Stainless Steel Cooking...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-07

... changes, if any, in the supply and demand conditions or business cycle for the Domestic Like Product that...-3088. Limited disclosure of business proprietary information (BPI) under an administrative protective... Merchandise. If you are a domestic producer, union/worker group, or trade/business association; import/export...

The Doctor Fox Research (1973) Rerevisited: "Educational Seduction" Ruled Out

ERIC Educational Resources Information Center

Peer, Eyal; Babad, Elisha

2014-01-01

In their study about the Dr. Fox lecture, Naftulin, Ware, and Donnelly (1973) claimed that an expressive speaker who delivered an attractive lecture devoid of any content could seduce students into believing that they had learned something significant. Over the decades, the study has been (and still is) cited hundreds of times and used by…

High-Speed Video Analysis in a Conceptual Physics Class

ERIC Educational Resources Information Center

Desbien, Dwain M.

2011-01-01

The use of probe ware and computers has become quite common in introductory physics classrooms. Video analysis is also becoming more popular and is available to a wide range of students through commercially available and/or free software. Video analysis allows for the study of motions that cannot be easily measured in the traditional lab setting…

77 FR 60119 - Proposed Consent Agreements: DesignerWare, LLC, Timothy Kelly and Ronald P. Koller, Aspen Way...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-02

... Rental Agent: the capacity to track the physical location of rented computers via WiFi hotspot locations. The information derived from WiFi hotspot contacts can frequently pinpoint a computer's location to a... a list of publicly available WiFi hotspots with the street addresses for the particular hotspots...

Dang An: A Brief History of the Chinese Imperial Archives and Its Administration

ERIC Educational Resources Information Center

Zhang, Wenxian

2004-01-01

Archives are preserved records of human activities. An account of Chinese archival development is as long as the written records of the Chinese history. Oracle bones, bronze ware, and wood and bamboo strips are the three most important recording forms of the early Chinese civilization, as they represented three major stages of archival development…

[Electrochemical methods of control of iodine contents in drinks].

PubMed

Zakharova, E A; Slepchenko, G B; Kolpakova, E Iu

2001-01-01

The simple and express methods of determination of iodide ions (0.01-0.20 mg/decimeter3) in iodine-enriched drinks by potentiometry and inversion voltamperometry were developed. The studies on influencing a storage time hermetically packaged carbonated beverages, a storage time of the depressurized drinks, stuff of ware on the contents of iodine in drinks are held.

Will MITx Change How We Think about Higher Education?

ERIC Educational Resources Information Center

DiSalvio, Philip

2012-01-01

While many colleges and universities are trying to adapt to the forces affecting higher education today, a recent move by the prestigious Massachusetts Institute of Technology is about to cause a seismic shift. The prototype version of MITx is scheduled for launch in spring 2012. MITx is an outgrowth of MIT OpenCourseWare (OCW), which began in…

A CBO Study. The Budget and Economic Outlook: An Update

DTIC Science & Technology

2006-08-01

Holland wrote the summary. Barry Blom, Mark Booth, and Christina Hawley Anthony wrote Chapter 1, with assistance from David Newman and Eric Schatten...Health Service Human Resources Paul Cullinan Unit Chief Christina Hawley Anthony Unemployment insurance, training programs, Administration on...management Gregory Waring Justice, community and regional development, highways, Amtrak, mass transit Susan Willie Commerce, Small Business

IMPLICATIONS OF NEW ARSENIC STANDARDS ON OKLAHOMA WATER RESOURCES

EPA Science Inventory

The new national standard for arsenic in drinking water supplies, slated to take effect in 2006, is having an unexpected impact on a number of Oklahoma communities. Currently, several municipalities in north central Oklahoma are in compliance with existing arsenic standards (50 ...

JPL Tech Works Mars 2020 Descent Stage

NASA Image and Video Library

2018-03-13

A technician works on the descent stage for NASA's Mars 2020 mission inside JPL's Spacecraft Assembly Facility. Mars 2020 is slated to carry NASA's next Mars rover to the Red Planet in July of 2020. https://photojournal.jpl.nasa.gov/catalog/PIA22342

Remnant colloform pyrite at the haile gold deposit, South Carolina: A textural key to genesis

USGS Publications Warehouse

Foley, N.; Ayuso, R.A.; Seal, R.R.

2001-01-01

Auriferous iron sulfide-bearing deposits of the Carolina slate belt have distinctive mineralogical and textural features-traits that provide a basis to construct models of ore deposition. Our identification of paragenetically early types of pyrite, especially remnant colloform, crustiform, and layered growth textures of pyrite containing electrum and pyrrhotite, establishes unequivocally that gold mineralization was coeval with deposition of host rocks and not solely related to Paleozoic tectonic events. Ore horizons at the Haile deposit, South Carolina, contain many remnants of early pyrite: (1) fine-grained cubic pyrite disseminated along bedding; (2) fine- grained spongy, rounded masses of pyrite that may envelop or drape over pyrite cubes; (3) fragments of botryoidally and crustiform layered pyrite, and (4) pyritic infilling of vesicles and pumice. Detailed mineral chemistry by petrography, microprobe, SEM, and EDS analysis of replaced pumice and colloform structures containing both arsenic compositional banding and electrum points to coeval deposition of gold and the volcanic host rocks and, thus, confirms a syngenetic origin for the gold deposits. Early pyrite textures are present in other major deposits of the Carolina slate belt, such as Ridgeway and Barite Hill, and these provide strong evidence for models whereby the sulfide ores formed prior to tectonism. The role of Paleozoic metamorphism was to remobilize and concentrate gold and other minerals in structurally prepared sites. Recognizing the significance of paragenetically early pyrite and gold textures can play an important role in distinguishing sulfide ores that form in volcanic and sedimentary environments from those formed solely by metamorphic processes. Exploration strategies applied to the Carolina slate belt and correlative rocks in the eastern United States in the Avalonian basement will benefit from using syngenetic models for gold mineralization.

Groundwater nitrate reduction versus dissolved gas production: A tale of two catchments.

PubMed

McAleer, E B; Coxon, C E; Richards, K G; Jahangir, M M R; Grant, J; Mellander, Per E

2017-05-15

At the catchment scale, a complex mosaic of environmental, hydrogeological and physicochemical characteristics combine to regulate the distribution of groundwater and stream nitrate (NO 3 - ). The efficiency of NO 3 - removal (via denitrification) versus the ratio of accumulated reaction products, dinitrogen (excess N 2 ) & nitrous oxide (N 2 O), remains poorly understood. Groundwater was investigated in two well drained agricultural catchments (10km 2 ) in Ireland with contrasting subsurface lithologies (sandstone vs. slate) and landuse. Denitrification capacity was assessed by measuring concentration and distribution patterns of nitrogen (N) species, aquifer hydrogeochemistry, stable isotope signatures and aquifer hydraulic properties. A hierarchy of scale whereby physical factors including agronomy, water table elevation and permeability determined the hydrogeochemical signature of the aquifers was observed. This hydrogeochemical signature acted as the dominant control on denitrification reaction progress. High permeability, aerobic conditions and a lack of bacterial energy sources in the slate catchment resulted in low denitrification reaction progress (0-32%), high NO 3 - and comparatively low N 2 O emission factors (EF 5g 1). In the sandstone catchment denitrification progress ranged from 4 to 94% and was highly dependent on permeability, water table elevation, dissolved oxygen concentration solid phase bacterial energy sources. Denitrification of NO 3 - to N 2 occurred in anaerobic conditions, while at intermediate dissolved oxygen; N 2 O was the dominant reaction product. EF 5g 1 (mean: 0.0018) in the denitrifying sandstone catchment was 32% less than the IPCC default. The denitrification observations across catchments were supported by stable isotope signatures. Stream NO 3 - occurrence was 32% lower in the sandstone catchment even though N loading was substantially higher than the slate catchment. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Depth of Small Scale Landslide in Slate Area : Case of 2009 Typhoon Morakot in Ai-Liao River, South Taiwan

NASA Astrophysics Data System (ADS)

Chen, T. C.; Yen, H. Y.; Zhou, F. L.

2015-12-01

This study focuses on the depth and magnitude of the small scale landslide in slate area in Ai-Liao-Shi catchment, South Taiwan. Landslide inventory of 2009 Typhoon Morakot, 5×5 m DEM, and aero photo have been interpreted by GIS software to assess the slope type and the scale of landslide events. The research database includes 276 landslides which orthographic projection areas are smaller than 1 ha. The slopes were also classified into dip, orthoclinical-dip, escarpment, and orthoclinical- escarpment 4 types of slope based on the slope aspect to the bedding orientation. The sliding plane, or so call the failure plane, was identified by aero photo, field reconnaissance and verification, and DEM before and after the typhoon event. Colluvium material deposited on the slip plane was removed based on the scarp and foot position, mass movement pattern, weak plane orientation, and the micro topography of a landslide to achieve the reasonable sliding plane. The maximum depth of sliding surface is explored through the slope type and sliding plane in total of 276 landslide cases. Results demonstrate that the average maximum depth, Dam, of dip slope is 4.6 m, Dam of orthoclinical-dip, escarpment, and orthoclinical-escarpment slopes are 5.8, 6.0, and 6.3 m respectively. In general, Dam is creasing with the average slope of landslide, the relationship of both factor is achieved in the study. Meanwhile, the orthographic projection area of landslide is increasing with the slope angle till the angle up to 40 degree then decreasing. The depth also varies with landslide magnitude. Finally, the relation of the depth normal to slope surface and the depth in gravity direction of landslides in four types slope are proposed, the R square values are 0.862 to 0.891 showing a good correlation between two types of depth.

KSC-91PC-0219

NASA Image and Video Library

1990-12-20

CAPE CANAVERAL, Fla. – The orbiter Discovery, its wheels retracted atop the orbiter transporter, rolls over from the OPF high bay to the VAB. Discovery is slated to lift off in March on mission STS-39, a DoD flight carrying a crew of seven. Photo credit: NASA

Geophysical methods as mapping tools in a strata-bound gold deposit: Haile mine, South Carolina slate belt.

USGS Publications Warehouse

Wynn, J.C.; Luce, R.W.

1984-01-01

The Haile mine is the largest gold producer in the eastern USA. It is postulated to be a strata-bound gold deposit formed by a fumarolic or hot-spring system in felsic tuffs of Cambrian(?) age. Two mineralized zones occur, each composed of a sericitic part overlain by a siliceous part. Au is concentrated in especially silicified horizons and in pyrite horizons in the siliceous part of each mineralized zone. The tuffs are metamorphosed to greenschist facies and intruded by diabase and other mafic dykes. Weathering is deep and the mineralized tuffs are partly covered by coastal-plain sediments. It is suggested that certain geophysical methods may be useful in mapping and exploring Haile-type deposits in the Carolina slate belt. Very low frequency electromagnetic resistivity surveys help define alteration and silicified zones. A magnetic survey found sharp highs that correlate with unexposed mafic and ultramafic dykes. Induced polarization proved useful in giving a two-dimensional view of the structure.-G.J.N.

Development of magnetic and elastic anisotropies in slates during progressive deformation

NASA Astrophysics Data System (ADS)

Hrouda, František; Pros, Zdeněk; Wohlgemuth, Jiří

1993-05-01

Magnetic and elastic anisotropies were investigated in rocks of the Nízký Jeseník Mountains (northeast Bohemian Massif) ranging in lithology from almost unmetamorphosed sediments, through slate, to phyllite, and showing a range of structural styles from sedimentary, through spaced and slaty cleavage, to metamorphic schistosity. In unmetamorphosed and undeformed sedimentary rocks, both the anisotropies display close relationships to the sedimentary fabric. During the development of the spaced and slaty cleavage they are gradually re-oriented into the attitudes of the deformational fabrics, and in the rocks with metamorphic schistosity they are fully related to the deformational fabric elements, which can be oriented in a very different way from the original sedimentary structures. The magnetic anisotropy is mostly due to the preferred orientation of phyllosilicates generated during very weak regional metamorphism, and subordinately due to the preferred orientation of magnetite. The elastic anisotropy is probably controlled by the preferred orientation of phyllosilicates and by the existence of oriented systems of microcracks.

Interpretations from multichannel seismic-reflection profiles of the deep crust crossing South Carolina and Georgia from the Appalachian Mountains to the Atlantic Coast

USGS Publications Warehouse

Behrendt, John C.

1985-01-01

The Appalachian décollement does not appear continuous from the Appalachian Mountains to the coast but rather appears to extend southeastward only to the Carolina slate belt. A series of reflections on lines S4, S6, and S8 and on the COCORP line is interpreted as evidence of southeastward-dipping imbricate faults, from the Brevard fault on the northwest to beyond the Augusta fault, which marks the southeastern extent of the Eastern Piedmont fault zone. The Carolina slate belt is characterized on the four seismic profiles by a complex series of diffractions and reflections extending from less than 1 s to 8 s. These arrivals are possibly the result of layering in the metasedimentary rocks complexly disrupted by the imbricate faults. A number of Triassic (?) basins are apparent in the reflection data for the rifted Charleston terrane identified from low-gradient magnetic anomalies.

Continued Water-Based Phase Change Material Heat Exchanger Development

NASA Technical Reports Server (NTRS)

Hansen, Scott W.; Sheth, Rubik B.; Poynot, Joe; Giglio, Tony; Ungar, Gene K.

2015-01-01

In a cyclical heat load environment such as low Lunar orbit, a spacecraft's radiators are not sized to meet the full heat rejection demands. Traditionally, a supplemental heat rejection device (SHReD) such as an evaporator or sublimator is used to act as a "topper" to meet the additional heat rejection demands. Utilizing a Phase Change Material (PCM) heat exchanger (HX) as a SHReD provides an attractive alternative to evaporators and sublimators as PCM HX's do not use a consumable, thereby leading to reduced launch mass and volume requirements. In continued pursuit of water PCM HX development two full-scale, Orion sized water-based PCM HX's were constructed by Mezzo Technologies. These HX's were designed by applying prior research on freeze front propagation to a full-scale design. Design options considered included bladder restraint and clamping mechanisms, bladder manufacturing, tube patterns, fill/drain methods, manifold dimensions, weight optimization, and midplate designs. Two units, Units A and B, were constructed and differed only in their midplate design. Both units failed multiple times during testing. This report highlights learning outcomes from these tests and are applied to a final sub-scale PCM HX which is slated to be tested on the ISS in early 2017.

Analytical Verifications in Cryogenic Testing of NGST Advanced Mirror System Demonstrators

NASA Technical Reports Server (NTRS)

Cummings, Ramona; Levine, Marie; VanBuren, Dave; Kegley, Jeff; Green, Joseph; Hadaway, James; Presson, Joan; Cline, Todd; Stahl, H. Philip (Technical Monitor)

2002-01-01

Ground based testing is a critical and costly part of component, assembly, and system verifications of large space telescopes. At such tests, however, with integral teamwork by planners, analysts, and test personnel, segments can be included to validate specific analytical parameters and algorithms at relatively low additional cost. This paper opens with strategy of analytical verification segments added to vacuum cryogenic testing of Advanced Mirror System Demonstrator (AMSD) assemblies. These AMSD assemblies incorporate material and architecture concepts being considered in the Next Generation Space Telescope (NGST) design. The test segments for workmanship testing, cold survivability, and cold operation optical throughput are supplemented by segments for analytical verifications of specific structural, thermal, and optical parameters. Utilizing integrated modeling and separate materials testing, the paper continues with support plan for analyses, data, and observation requirements during the AMSD testing, currently slated for late calendar year 2002 to mid calendar year 2003. The paper includes anomaly resolution as gleaned by authors from similar analytical verification support of a previous large space telescope, then closes with draft of plans for parameter extrapolations, to form a well-verified portion of the integrated modeling being done for NGST performance predictions.

Recycling in 1995: The lows after the highs

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCreery, P.

1996-03-01

1995 was a mixed year for recyclers. The boom in prices that began in mid-1994 ended in mid-1995; numerous gleaming new mills and plants that fed on recovered paper and plastics opened, but a few outdated facilities closed; Congress agreed on little legislation that would affect recycling operations; and some states failed to meet recycling goals set for the end of the year. In short, 1995 was something of a sobering reality after the heady days of 1994, when market prices boomed, the US Supreme Court declared flow control statutes to be unconstitutional, and states and municipalities reported sizable increasesmore » in the amount of materials being diverted from landfills. How recycling will fare in 1996 is uncertain. Although more mills and plants that consume recovered materials are slated to open, recycling officials are mixed on whether the federal government or any state will pass legislation impacting the industry. Additionally, the ups and downs of the recycling markets in 1995 have left many recyclers and analysts shaking their heads, saying that it is all but impossible to predict the future health of an industry that is experiencing growing pains.« less

Early Pottery Making in Northern Coastal Peru. Part IV: Mössbauer Study of Ceramics from Huaca Sialupe

NASA Astrophysics Data System (ADS)

Shimada, I.; Häusler, W.; Jakob, M.; Montenegro, J.; Riederer, J.; Wagner, U.

2003-09-01

We report on an interdisciplinary study of ceramic material excavated in 1999 and 2001 at a 1000-year old ceramic and metal production site, located at Huaca Sialupe in the La Leche valley on the north coast of Peru and dating to the Middle Sicán period (AD 900-1100). Sherds of Sicán red- and blackware, numerous moulds, several kilns and other evidence of pottery making were found. The pottery, in particular, is famous for its fine texture and perfect black surface finish. In addition, some clay lumps and sherds of unfired Sicán pottery were excavated. Within the same workshop several large inverted ceramic urns used as furnaces were found together with Middle Sicán metal working tools and debris. Various physical methods were applied to investigate this material. The ancient firing procedures could be elucidated by comparing the spectra observed for the ancient sherds with model spectra of laboratory and field fired clay samples. This shows that the fine ware made at Huaca Sialupe was intentionally fired under strongly reducing conditions at temperatures up to 900°C. Reoxidation at the end of the reducing firing took place only occasionally. Less care was taken in firing moulds used for pottery making.

Solvent Effects on Emission Yield and Lifetime for Coumarin Laser Dyes. Requirements for a Rotatory Decay Mechanism.

DTIC Science & Technology

1983-10-31

spectral shifts and sizeable solvent iso- tope effects have been frequently observed for solvent exciplexes , e in contrast to our findings. The results also...49. Chandross, E. A.; "The Exciplex " Gordon, M.; Ware, W. R. (ed.) 4 Academic Press, Inc.: New York; 1975; p 187. SO. a. Beecroft, R. A.; Davidson, R

Educational and Nonprofit Institutions Receiving Prime Contract Awards for RDT&E (Research, Development, Test and Evaluation), Fiscal Year 1975.

DTIC Science & Technology

1975-01-01

i 9 CHAPEL HILL WARE ,’ WILMINGON HCAR so PENNSYLVANIA UNIVERSITY Of 2 1 FNILAOELPNIA Pfa 1 NORTN OAK"TA UNIVERSITY OF in S GRANO FOPKS NOAK • PETER...MAKE FOREST UNIVERSITY * *- *WINSTON SALEM NCAR i TEXAS CHRISTIAN UNIVERSITY ZZ FORT WORTH TEXAS 77 * WASHINGTON STATE UNIVERSITY * .* T XAS

Platelet Glycoprotein lb-1X and Malignancy

DTIC Science & Technology

2010-09-01

supporting the accumulation of more platelets and the elaboration of a fibrin - rich network produced by coagulation factors. This paradigm has been...a platelet - rich thrombus by tethering the platelet to a thrombogenic surface. Several ligands binding to GP Ib-IX have been identified, including...08-1-0576 TITLE: Platelet Glycoprotein lb-1X and Malignancy PRINCIPAL INVESTIGATOR: Dr. Jerry Ware

Reflections on Active Networking

DTIC Science & Technology

2005-01-01

Reflections on Active Networking Jonathan M. Smith CIS Department, University of Pennsylvania jms@cis.upenn.edu Abstract Interactions among...called “ Active Networking” came into being. It demonstrates the deep roots Active Networking has in the programming languages, networking and operating...broader research agenda, and the specific goals pursued in the SwitchWare project. I close by speculating on possible futures for Active Networking

Draft SEI Program Plans: 1994-1998

DTIC Science & Technology

1993-08-01

process must depersonalize risks so they are viewed as opportunities for program success. Factors for communication are in all the method devel...and the undergraduate level to adequately prepare new soft- ware engineers entering the work force. Educators and trainers of current professionals...learning opportu- nities. The technical foundation for many of these products is the evolving SEI model curricula for graduate and undergraduate degree

PRODUCTION OF SLIP CAST CALCIA HOLLOWWARE

DOEpatents

Stoddard, S.D.; Nuckolls, D.E.; Cowan, R.E.

1963-12-31

A method for producing slip cast calcia hollow ware in which a dense calcia grain is suspended in isobutyl acetate or a mixture of tertiary amyl alcohol and o-xylene is presented. A minor amount of triethanolamine and oleic acid is added to the suspension vehicle as viscosity adjusting agents and the suspension is cast in a plaster mold, dried, and fired. (AEC)

Redefining HHS International Response: Challenges and Recommendations for Interagency Partnerships

DTIC Science & Technology

2009-04-01

Approach and Enhance Interagency Planning, 1. 22 David Hinson , U.S. Military Interaction with Humanitarian Assistance Organizations During Small-Scale...Defense University Press, 1996); http://www.dodccrp.org/files/Hayes_Interagency.pdf (accessed March 2, 2009. 31 Hinson , Military Interaction with...Humanitarian Assistance Organizations, 29. 32 Benton and Ware, “Haiti: A Case Study”. 33 Hinson , Military Interaction with Humanitarian Assistance

Viking Software Data

DTIC Science & Technology

1977-05-01

RADC-TR-77-168 Final Technical Report M~ay 1977 ll VIKING SOF11WARE DATA Martin Marietta Corporation Approved for public release; distribution...practices employed on a large and complex system development by the Martin Marietta Corporation. The intent of the RADC program to which this document...the technique are described. The preparation of this report could not have been accomplished without considerable assistance from fellow Martin

40 CFR 63.11438 - What are the standards for new and existing sources?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (a)(1) and (2) of this section: (1) Use natural gas, or equivalent clean-burning fuel, as the kiln fuel; or (2) Use an electric-powered kiln. (b) You must maintain annual wet glaze usage records for... for new and existing sources? (a) For each kiln that fires glazed ceramic ware, you must maintain the...

14. INTERIOR VIEW OF THIRD FLOOR OF FACTORY ADDITION, NORTHWEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. INTERIOR VIEW OF THIRD FLOOR OF FACTORY ADDITION, NORTHWEST CORNER OF BUILDING. AT THE CENTER IS THE BUFFING MACHINE, MANUFACTURED BY THE ACME CO. OF DETROIT, MICHIGAN. IT WAS HERE THAT ALUMINUM WARES WERE BROUGHT FOR FINAL GRINDING AND BUFFING. THE HOSES REMOVED DUST AND DEBRIS. - Illinois Pure Aluminum Company, 109 Holmes Street, Lemont, Cook County, IL

Model-It: A Case Study of Learner-Centered Software Design for Supporting Model Building.

ERIC Educational Resources Information Center

Jackson, Shari L.; Stratford, Steven J.; Krajcik, Joseph S.; Soloway, Elliot

Learner-centered software design (LCSD) guides the design of tasks, tools, and interfaces in order to support the unique needs of learners: growth, diversity and motivation. This paper presents a framework for LCSD and describes a case study of its application to the ScienceWare Model-It, a learner-centered tool to support scientific modeling and…

Effects of foliar and tuber sprout suppressants on shelf life of ware potatoes under tropical ambient conditions

USDA-ARS?s Scientific Manuscript database

Potato (Solanum tuberosum) is an important source of dietary carbohydrate and cash income for farmers in the tropical highlands of Kenya. The feasibility for cold storage at the farm level is limited due to the high costs of maintaining such a facility and there is limited data on the long-term post...

Braiding-Machine Operator (cot. small wares; textiles) 6-19.986--Standardization of the General Aptitude Test Battery.

ERIC Educational Resources Information Center

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

Design, Fabrication and Testing of Tunable RF Meta-atoms

DTIC Science & Technology

2012-06-14

Simple cantilever beam with actuation pad covered with a thin dielectric layer for short circuit protection...Cantilever actuation simulated with CoventorWare ® to determine the biasing voltage necessary to draw the cantilevers to the actuation pads ...Capacitive tunable meta-atom fabricated on quartz substrate. The meta-atom had to be cut at the metal trace leading to the cantilever actuation pads

DEVELOPMENT AND REVIEW OF MONITORING METHODS AND RISK ASSESSMENT MODELS USED TO DETERMINE THE EFFECTS OF BIOSOLIDS LAND APPLICATION ON HUMAN HEALTH AND THE ENVIRONMENT

EPA Science Inventory

Development and Review of monitoring methods and risk assessment models for biosolids land application impacts on air and land

Ronald F Herrmann (NRMRL), Mike Broder (NCEA), and Mike Ware (NERL)

Science Questions .

MYP Science Question: What additional model...

76 FR 7534 - Porcelain-on-Steel Cooking Ware from the People's Republic of China: Final Results of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-10

... (``Act''). See Initiation of Five-Year (``Sunset'') Review, 75 FR 60731 (October 1, 2010) (``Sunset...)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2). As a result of this sunset review, the... Commerce. SUMMARY: On October 1, 2010, the Department of Commerce (``Department'') initiated a sunset...

Management of pump thrombosis in patients with left ventricular assist devices.

PubMed

Stulak, John M; Sharma, Shashank; Maltais, Simon

2015-04-01

The gradual evolution of left ventricular assist device (LVAD) therapy has resulted in a durable option for patients as either a bridge to transplantation (BTT) or a destination therapy (DT). Outcomes with current continuous-flow devices continue to demonstrate significant patient benefit, not only in enhanced survival but also in improved functional capacity and quality of life. While the lessening of adverse events through time has resulted in more widespread adoption of this therapy, there continues to be unintended consequences, including, most notably, infection, bleeding, and thrombosis. Beginning in 2011, centers and collaborative groups began to observe a significant increase in the incidence of pump thrombosis with the HeartMate II LVAD (Thoratec Corp., Pleasanton, CA, USA). However, this clinical scourge is not limited to the HeartMate II, as the HeartWare Ventricular Assist System (HVAD; HeartWare Inc., Framingham, MA, USA) has also had these same issues, which led to pump modifications and the appreciation of more strict control of blood pressure and anticoagulation with this pump design. We review the current status of the field of mechanical circulatory support in its approach to diagnosis, management, and prevention of LVAD pump thrombosis.

Ground-Based Correction of Remote-Sensing Spectral Imagery

NASA Technical Reports Server (NTRS)

Alder-Golden, Steven M.; Rochford, Peter; Matthew, Michael; Berk, Alexander

2007-01-01

Software has been developed for an improved method of correcting for the atmospheric optical effects (primarily, effects of aerosols and water vapor) in spectral images of the surface of the Earth acquired by airborne and spaceborne remote-sensing instruments. In this method, the variables needed for the corrections are extracted from the readings of a radiometer located on the ground in the vicinity of the scene of interest. The software includes algorithms that analyze measurement data acquired from a shadow-band radiometer. These algorithms are based on a prior radiation transport software model, called MODTRAN, that has been developed through several versions up to what are now known as MODTRAN4 and MODTRAN5 . These components have been integrated with a user-friendly Interactive Data Language (IDL) front end and an advanced version of MODTRAN4. Software tools for handling general data formats, performing a Langley-type calibration, and generating an output file of retrieved atmospheric parameters for use in another atmospheric-correction computer program known as FLAASH have also been incorporated into the present soft-ware. Concomitantly with the soft-ware described thus far, there has been developed a version of FLAASH that utilizes the retrieved atmospheric parameters to process spectral image data.

Dosimetric validation of the Acuros XB Advanced Dose Calculation algorithm: fundamental characterization in water

NASA Astrophysics Data System (ADS)

Fogliata, Antonella; Nicolini, Giorgia; Clivio, Alessandro; Vanetti, Eugenio; Mancosu, Pietro; Cozzi, Luca

2011-05-01

This corrigendum intends to clarify some important points that were not clearly or properly addressed in the original paper, and for which the authors apologize. The original description of the first Acuros algorithm is from the developers, published in Physics in Medicine and Biology by Vassiliev et al (2010) in the paper entitled 'Validation of a new grid-based Boltzmann equation solver for dose calculation in radiotherapy with photon beams'. The main equations describing the algorithm reported in our paper, implemented as the 'Acuros XB Advanced Dose Calculation Algorithm' in the Varian Eclipse treatment planning system, were originally described (for the original Acuros algorithm) in the above mentioned paper by Vassiliev et al. The intention of our description in our paper was to give readers an overview of the algorithm, not pretending to have authorship of the algorithm itself (used as implemented in the planning system). Unfortunately our paper was not clear, particularly in not allocating full credit to the work published by Vassiliev et al on the original Acuros algorithm. Moreover, it is important to clarify that we have not adapted any existing algorithm, but have used the Acuros XB implementation in the Eclipse planning system from Varian. In particular, the original text of our paper should have been as follows: On page 1880 the sentence 'A prototype LBTE solver, called Attila (Wareing et al 2001), was also applied to external photon beam dose calculations (Gifford et al 2006, Vassiliev et al 2008, 2010). Acuros XB builds upon many of the methods in Attila, but represents a ground-up rewrite of the solver where the methods were adapted especially for external photon beam dose calculations' should be corrected to 'A prototype LBTE solver, called Attila (Wareing et al 2001), was also applied to external photon beam dose calculations (Gifford et al 2006, Vassiliev et al 2008). A new algorithm called Acuros, developed by the Transpire Inc. group, was built upon many of the methods in Attila, but represents a ground-up rewrite of the solver where the methods were especially adapted for external photon beam dose calculations, and described in Vassiliev et al (2010). Acuros XB is the Varian implementation of the original Acuros algorithm in the Eclipse planning system'. On page 1881, the sentence 'Monte Carlo and explicit LBTE solution, with sufficient refinement, will converge on the same solution. However, both methods produce errors (inaccuracies). In explicit LBTE solution methods, errors are primarily systematic, and result from discretization of the solution variables in space, angle, and energy. In both Monte Carlo and explicit LBTE solvers, a trade-off exists between speed and accuracy: reduced computational time may be achieved when less stringent accuracy criteria are specified, and vice versa' should cite the reference Vassiliev et al (2010). On page 1882, the beginning of the sub-paragraph The radiation transport model should start with 'The following description of the Acuros XB algorithm is as outlined by Vassiliev et al (2010) and reports the main steps of the radiation transport model as implemented in Eclipse'. The authors apologize for this lack of clarity in our published paper, and trust that this corrigendum gives full credit to Vassiliev et al in their earlier paper, with respect to previous work on the Acuros algorithm. However we wish to note that the entire contents of the data and results published in our paper are original and the work of the listed authors. References Gifford K A, Horton J L Jr, Wareing T A, Failla G and Mourtada F 2006 Comparison of a finite-element multigroup discrete-ordinates code with Monte Carlo for radiotherapy calculations Phys. Med. Biol. 51 2253-65 Vassiliev O N, Wareing T A, Davis I M, McGhee J, Barnett D, Horton J L, Gifford K, Failla G, Titt U and Mourtada F 2008 Feasibility of a multigroup deterministic solution method for three-dimensional radiotherapy dose calculations Int. J. Radiat. Oncol. Biol. Phys. 72 220-7 Vassiliev O N, Wareing T A, McGhee J, Failla G, Salehpour M R and Mourtada F 2010 Validation of a new grid based Boltzmann equation solver for dose calculation in radiotherapy with photon beams Phys. Med. Biol. 55 581-98 Wareing T A, McGhee J M, Morel J E and Pautz S D 2001 Discontinuous finite element Sn methods on three-dimensional unstructured grids Nucl. Sci. Eng. 138 256-68

Petrographic microscope investigation of mortar and ceramic technologies for the conservation of the built heritage

NASA Astrophysics Data System (ADS)

Pavia, S.; Caro, S.

2007-07-01

Polarised-light (or petrographic) microscopy has been widely applied to heritage materials to assess composition and diagnose damage. However, instead, this paper focuses on the petrographic investigation of brick and mortar technologies for the production of quality repair materials compatible with their adjacent fabrics. Furthermore, the paper relates production technologies to the physical properties of the materials fabricated, and thus their final quality and durability. According to Cesare Brandi´s theory of compatibility (the 20th century architect on whose work modern conservation theory and practice are largely based) existing historic materials should be replaced with their equivalent. This paper demonstrates that polarised-light microscopy provides data on the origin and nature of raw materials, and processing parameters such as blending, mixing, firing, calcination and slaking, and how these relate to the quality of the final product. In addition, this paper highlights the importance of production technologies as these directly impact the physical properties of the materials fabricated and thus determine their final quality and durability. In this context, the paper investigates mortar calcination and slaking, two important operations in the manufacture of building limes that govern the reactivity, shrinkage and water retention of a lime binder which will impact mortar's properties such as workability, plasticity and carbonation speed, and these in turn will determine the ease of execution, durability and strength of a lime mortar. Petrographic analysis also provides evidence of ceramic technology including identification of local or foreign production and processing parameters such as sieving, blending, mixing and firing. A petrographic study of the ceramic matrix coupled to the diagnosis of mineral phases formed during firing allows to quantify sintering and vitrification and thus determine firing temperatures. Finally, certain features of the raw clay such as the grading and the amount and nature of the non-plastic material inform, not only on the raw material's origin, but also impact the physical properties of the ceramic ware.

Software Reviews: Programs Worth a Second Look.

ERIC Educational Resources Information Center

Olds, Henry F., Jr.; And Others

1988-01-01

Examines four software packages: (1) "Wordbench"--writing and word processing, grades 9-12 (IBM and Apple); (2) "Muppet Slate"--language arts, grades K-2 (Apple); (3) "Accu-Weather Forecaster"--weather analysis and forecasting, grades 3-12 (modem with IBM or Mac); and (4) "The Ripple That Changed American…

Turnaround Project Signs Six States

ERIC Educational Resources Information Center

Maxwell, Lesli A.

2010-01-01

Dozens of schools are slated for aggressive interventions over the next three years under a new, multistate effort that aims to clear hurdles that have hindered previous attempts to improve underperforming schools. Education officials in Colorado, Delaware, Illinois, Louisiana, Massachusetts, and New York have agreed to partner with Mass Insight…

75 FR 22576 - Minority Science and Engineering Improvement Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

... DEPARTMENT OF EDUCATION [CFDA No. 84.120A] Minority Science and Engineering Improvement Program... the fiscal year (FY) 2009 grant slate for the Minority Science and Engineering Improvement Program... Engineering Improvement Program (MSEIP), authorized by Title III, Part E of the Higher Education Act of 1965...

Unlocking the Creative Potential of Rural India

ERIC Educational Resources Information Center

Raghavan, Ramji

2007-01-01

"Rural education": the phrase conjures up unflattering images of broken blackboards and slates, lackadaisical teachers and students, rote learning and of outdated teaching techniques and suppressed creativity. Yet, these images are completely out of consonance with modern India and a knowledge-based society. This article describes a new…

Breccia Formation at a Complex Impact Crater: Slate Islands, Lake Superior, Ontario, Canada

NASA Technical Reports Server (NTRS)

Dressler, B. O.; Sharpton, V. L.

1997-01-01

The Slate Islands impact structure is the eroded remnant of a approximately 30-32 km-diameter complex impact structure located in northern Lake Superior, Ontario, Canada. Target rocks are Archean supracrustal and igneous rocks and Proterozoic metavolcanics, metasediments, and diabase. A wide variety of breccias occurs on the islands, many of which contain fragments exhibiting shock metamorphic features. Aphanitic, narrow and inclusion-poor pseudotachylite veins, commonly with more or less parallel boundaries and apophyses branching off them, represent the earliest breccias formed during the compression stage of the impact process. Coarse-grained, polymictic elastic matrix breccias form small to very large, inclusion-rich dikes and irregularly shaped bodies that may contain altered glass fragments. These breccias have sharp contacts with their host rocks and include a wide range of fragment types some of which were transported over minimum distances of approximately 2 km away from the center of the structure. They cut across pseudotachylite veins and contain inclusions of them. Field and petrographic evidence indicate that these polymictic breccias formed predominantly during the excavation and central uplift stages of the impact process. Monomictic breccias, characterized by angular fragments and transitional contacts with their host rocks, occur in parautochthonous target rocks, mainly on the outlying islands of the Slate Islands archipelago. A few contain fragmented and disrupted, coarse-grained, polymictic clastic matrix breccia dikes. This is an indication that at least some of these monomictic breccias formed late in the impact process and that they are probably related to a late crater modification stage. A small number of relatively large occurrences of glass-poor, suevitic breccias occur at the flanks of the central uplift and along the inner flank of the outer ring of the Slate Islands complex crater. A coarse, glass-free, allogenic breccia, containing shatter-coned fragments derived from Proterozoic target rocks (upper target strata), observed at two locations may be analogous to the 'Bunt Breccia' of the Ries crater in Germany. At one of these locations this breccia lies close to a crater suevite deposit. At the other, it overlies parautochthonous, monomictic breccia. The State Islands impact breccias are superbly exposed, much better than breccias in most other terrestrial impact structures. Observations, including those indicative of multiple and and sequential processes, provide insight on how impact breccias form and how they relate to the various phases of the impact process. Eventually they will lead to an improved understanding of planetary impact processes.

International Film Guide 1972.

ERIC Educational Resources Information Center

Cowie, Peter, Ed.

Brief descriptions of film production activity in 44 countries and reviews of important films from these countries are presented, along with lists of films recently in production. A paragraph-long description of film festivals slated for 1972 is given. Sound track music available on records, 16mm films available in the United Kingdom and the…

The Use of Multiple Slate Devices to Support Active Reading Activities

ERIC Educational Resources Information Center

Chen, Nicholas Yen-Cherng

2012-01-01

Reading activities in the classroom and workplace occur predominantly on paper. Since existing electronic devices do not support these reading activities as well as paper, users have difficulty taking full advantage of the affordances of electronic documents. This dissertation makes three main contributions toward supporting active reading…

A College Education? Or Diminished Expectations?

ERIC Educational Resources Information Center

Beaky, Lenore A.

2010-01-01

City University of New York's (CUNY) new community college, planned almost entirely by administrators and slated to open in 2012, seems designed to shunt its student body into narrow, mostly terminal career-technical programs with the promise of an associate's degree at the end. But to what purpose? To "reimagine community college education…

5. Photograph of a photograph in possession of Rock Island ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. Photograph of a photograph in possession of Rock Island Arsenal Historical Office. WEST AND SOUTH ELEVATIONS, BEFORE REMOVAL OF CHIMNEY, FINIALS, GINGERBREAD, AND VARIEGATED SLATE ROOFING. DATED C. 1876. - Rock Island Arsenal, Building No. 321, Rodman Avenue & Rock Island Avenue, Rock Island, Rock Island County, IL

49 CFR 1039.11 - Miscellaneous commodities exemptions.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., etc. 26 214 Wrapping paper, wrappers or coarse paper. 26 218 Sanitary tissue stock. 26 471 Sanitary... 30 111 Rubber pneumatic tires or parts. 31 ......do Leather or leather products. 32 ......do Clay... 32 952 15 Cinders, clay, shale expanded shale), slate or volcanic (not pumice stone), or haydrite. 33...

7 CFR 1755.506 - Aerial wire services

Code of Federal Regulations, 2010 CFR

2010-01-01

.../Orange or White Orange 3 White/Green or White Green 4 White/Brown or White Brown 5 White/Slate or White... station protectors. (p) When it is necessary to avoid intervening obstacles between a pole and a building... lines to buildings shall follow the shortest feasible route commensurate with the requirements of...

25. Detail, roof at junction of main roof and tower ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

25. Detail, roof at junction of main roof and tower skirt roof; note condition of slates, subroof, missing gutter, lead pipe gutter outlet; view to northwest from lift-bed truck, 135mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

The "Creation-Science" Case and Pro Bono Publico.

ERIC Educational Resources Information Center

Kerr, Peggy L.

1982-01-01

Describes contributions and efforts of New York law firm (Skadden, Arps, Slate, Meagher, Flom) personnel in developing plaintiff's case in McLean v. Arkansas 590 (balanced treatment of creationism/evolution). Discusses aspects of "Pro Bono Publico" (unpaid public interest service) endeavors in general and those related to this law firm in…

The Hidden Formula of Youth Digital Media Engagement. Tips

ERIC Educational Resources Information Center

Reynolds, Rebecca

2009-01-01

The slate of recent reports on youth technology engagement do not explicitly address the construct of "perceived competence," the third main affective state associated with intrinsically-motivated behavior in Edward Deci and Richard Ryan's broader psychological research. In the Spring of 2008, a team of researchers at Syracuse…

26 CFR 1.48-1 - Definition of section 38 property.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., or slate; the construction of roads, bridges, or housing; the processing of meat, fish or other... commodity in a large mass prior to its consumption or utilization. Thus, if a facility is used to store... storage tanks, grain storage bins, silos, fractionating towers, blast furnaces, basic oxygen furnaces...

26 CFR 1.48-1 - Definition of section 38 property.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., or slate; the construction of roads, bridges, or housing; the processing of meat, fish or other... commodity in a large mass prior to its consumption or utilization. Thus, if a facility is used to store... storage tanks, grain storage bins, silos, fractionating towers, blast furnaces, basic oxygen furnaces...

26 CFR 1.48-1 - Definition of section 38 property.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., or slate; the construction of roads, bridges, or housing; the processing of meat, fish or other... commodity in a large mass prior to its consumption or utilization. Thus, if a facility is used to store... storage tanks, grain storage bins, silos, fractionating towers, blast furnaces, basic oxygen furnaces...

26 CFR 1.48-1 - Definition of section 38 property.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., or slate; the construction of roads, bridges, or housing; the processing of meat, fish or other... commodity in a large mass prior to its consumption or utilization. Thus, if a facility is used to store... storage tanks, grain storage bins, silos, fractionating towers, blast furnaces, basic oxygen furnaces...

26 CFR 1.48-1 - Definition of section 38 property.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., or slate; the construction of roads, bridges, or housing; the processing of meat, fish or other... commodity in a large mass prior to its consumption or utilization. Thus, if a facility is used to store... storage tanks, grain storage bins, silos, fractionating towers, blast furnaces, basic oxygen furnaces...

76 FR 29228 - Funding Down Slate; Demonstration Grants for Indian Children Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... Children Program AGENCY: Office of Elementary and Secondary Education, Department of Education. ACTION... Indian Children program authorized by 20 U.S.C. 7441 to make new grant awards in FY 2011. The Secretary... notice inviting applications for new awards under the Demonstration Grants for Indian Children program...

ARC-2010-ACD10-0071-022

NASA Image and Video Library

2010-04-16

Sustainability Base celebration, sheetrock signing and social in lobby of N-200. Rose King of Code C slated to become on of the first occupants of the new Green building at NASA Ames Research Center, Moffett Field, California designated Sustainability Base N-232 puts her mark on the building forever.

Power-poor nation taps jungle river for energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-12-13

The Paute River 1,690-MW hydroelectric power project near Cuenca will triple the power generating capacity of Ecuador. Progress on this practically inaccessible site is reported. The centerpiece will be the 560-ft-high Amaluza Dam. The underground powerhouse is slated to come on line in 1982.

77 FR 71574 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-03

... Test. OMB Control Number: None Form Number(s): The automated survey instrument has no form number. Type... have been developed and are now slated for a large-scale field test to evaluate the questions and the... reference period and timing of data collection. Qualitative research has [[Page 71575

78 FR 25717 - Applications for New Awards; Strengthening Institutions Program (SIP)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-02

... use of time, staff, money, or other resources while improving student learning or other educational... migrant, or who have disabilities. Open educational resources (OER) means teaching, learning, and research... awards for individual development grants in rank order from the funding slate according to the average...

24. Roof detail from liftbed truck, showing pan roof above ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. Roof detail from lift-bed truck, showing pan roof above breezeway, with sawn redwood trim, tube-type drains; note missing rain gutter at roof edge, deteriorated condition of slates; view to south, 90mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

75 FR 58373 - Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP)

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

... DEPARTMENT OF EDUCATION [CFDA No. 84.334A (Partnership grants)] Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP) AGENCY: Office of Postsecondary Education, Department of Education. ACTION: Notice of intent to fund down the fiscal year (FY) 2008 grant slate for the GEAR UP...

The Electoral College

ERIC Educational Resources Information Center

Social Education, 2008

2008-01-01

The United States has a system of voting for a president that is unique among western democracies. Rather than vote directly for a president or entrust the presidential election to a parliament, Americans instead vote for statewide slates of electors who are pledged to a candidate. The successful electors become the members of the Electoral…

Groundwater denitrification in two agricultural river catchments: influence of hydro-geological setting and aquifer geochemistry

NASA Astrophysics Data System (ADS)

McAleer, Eoin; Mellander, Per-Erik; Coxon, Catherine; Richards, Karl G.; Jahangir, Mohammad M. R.

2015-04-01

Identifying subsurface environments with a natural capacity for denitrification is important for improving agricultural management. At the catchment scale, a complex hierarchy of landscape, hydro-geological and physico-chemical characteristics combine to affect the distribution of groundwater nitrate (NO3-). This study was conducted along four instrumented hillslopes in two ca. 10km2 agricultural river catchments in Ireland, one dominated by arable and one by grassland agriculture. Both catchments are characterised by well drained soils, but have differing aquifer characteristics. The arable catchment is underlain by weathered Ordovician slate bedrock which is extensively fractured with depth. The grassland catchment is characterised by Devonian sandstone bedrock, exhibiting both lateral (from upslope to near stream) and vertical variations in permeability along each hillslope. The capacity for groundwater denitrification was assessed by examining the concentration and distribution patterns of N species (total nitrogen, nitrate, nitrite, ammonium), dissolved organic carbon (DOC), dissolved oxygen (DO) and redox potential (Eh) in monthly samples from shallow and deep groundwater piezometers (n=37). Additionally, the gaseous products of denitrification: nitrous oxide (N2O) and excess dinitrogen (excess N2) were measured seasonally using gas chromatography and membrane inlet mass spectroscopy, respectively. The slate catchment was characterised by uniformity, both laterally and vertically, in aquifer geochemistry and gaseous denitrification products. The four year spatial mean groundwater NO3--N concentration was 6.89 mg/l and exhibited low spatial and temporal variability (temporal SD: 1.19 mg/l, spatial SD: 1.185 mg/l). Elevated DO concentrations (mean: 9.75 mg/l) and positive Eh (mean: +176.5mV) at all sample horizons indicated a setting with little denitrification potential. This non-reducing environment was reflected in a low accumulation of denitrification products (excess N2 mean: 1.57 mg/l, N2O mean: 1.61µg/l). Groundwater in the sandstone catchment had a comparable mean NO3--N concentration to that of the slate site (6.24mg/l) and while temporal variation was low (SD: 0.9 mg/l), spatial variation was substantially greater (SD: 3.63 mg/l). The accumulation of denitrification products in the sandstone catchment showed a large contrast to that of the slate with excess N2 ranging from 0.16-8.77 mg/l and N2O from 0.07-66.42 µg/l. Mean dissolved oxygen concentration and redox potential were 5.6mg/l and 67.5mV respectively. The near stream zones in particular were marked by favourable denitrifying conditions: hydraulic conductivity (<2m/day), Eh (<50mV) and DO (<5mg/l). Winter recharge had a diluting effect, increasing the concentration of DO and Eh with a concurrent decrease in excess N2 and N2O. The evolution of groundwater geochemistry along a subsurface flow path is a function of residence time. While both catchments are characterised as permeable, the slate catchment exhibits greater hydraulic conductivity values, particularly at depth, with groundwater geochemistry in all horizons reflective of recently recharged water. The deeper groundwater pathways and near stream zones in the sandstone catchment have a lower hydraulic conductivity. As such, dissolved oxygen and redox gradients occur with depth, causing the development of NO3- reducing zones.

Annual Electronics Manufacturing Seminar Proceedings (16th) Held in Ridgecrest, California on 19-21 February 1992

DTIC Science & Technology

1992-02-21

Retrieval Using the Data Analysis Research Tool ...................... 365 Kevin Holm Comarco, Inc. Ridgecrest, California and Richard Schlein Apple...waring locations codinUsed andsin be ailablemachieryandtechniqusLow, waerS S mple, Smple, ow Average toap rv di eag t preominatedepbishedoinforatighee h...by Kevin Holm Senior Technical Specialist Comarco, Inc. Ridgecrest, California and Richard Schlein Senior Systems Engineer Apple Cnmputer, Inc

Optically Induced Spin Gates in Coupled Quantum Dots Using the Electron-Hole Exchange Interaction

DTIC Science & Technology

2008-09-08

S. Bracker, I. V. Ponomarev, V. L. Korenev , M. E. Ware, M. F. Doty, T. L. Reinecke, and D. Gammon, Science 311, 636 2006. 16L. Wang, A. Rastelli...Doty, I. V. Ponomarev, A. S. Bracker, E. A. Stinaff, V. L. Korenev , T. L. Reinecke, and D. Gammon, Phys. Rev. B 75, 245318 2007. 26M. Bayer et al

Web-ware bioinformatical analysis and structure modelling of N-terminus of human multisynthetase complex auxiliary component protein p43.

PubMed

Deineko, Viktor

2006-01-01

Human multisynthetase complex auxiliary component, protein p43 is an endothelial monocyte-activating polypeptide II precursor. In this study, comprehensive sequence analysis of N-terminus has been performed to identify structural domains, motifs, sites of post-translation modification and other functionally important parameters. The spatial structure model of full-chain protein p43 is obtained.

Patient Satisfaction Survey, 1989-1990

DTIC Science & Technology

1990-07-01

Health Association of America was helpful in providing the GHAA Consumer Satisfaction Survey items. iv PATIENT SATISFACTION SURVEY Background The patient ...Ware, J. E., Jr. (1988). Involving consumers in quality of care assessment. Health Affairs, 2, 33-48. Fisher, A. W. (1971). Patients ’ evaluation of...of America (GHAA) Consumer Satisfaction Survey. Patient Satisfaction Surveys were mailed to 9,000 eligible beneficiaries at 37 Army medical treatment

The "peer" in "peer review"

USGS Publications Warehouse

Perry, Gad; Bertoluci, Jaime; Bury, R. Bruce; Hansen, Robert W.; Jehle, Robert; Measey, John; Moon, Brad R.; Muths, Erin L.; Zuffi, Marco A.L.

2011-01-01

Peer review is the best available mechanism for assessing and improving the quality of scientific work. As herpetology broadens its disciplinary and geographic boundaries, high-quality external review is ever more essential. We are writing this editorial jointly because the review process has become increasingly difficult. The resulting delays slow publication times, negatively affect performance reviews, tenure, promotions, and grant proposal success. It harms authors, agencies, and institutions (Ware 2011).

Developing Simulated Cyber Attack Scenarios Against Virtualized Adversary Networks

DTIC Science & Technology

2017-03-01

MAST is a custom software framework originally designed to facilitate the training of network administrators on live networks using SimWare. The MAST...or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington headquarters Services ...scenario development and testing in a virtual test environment. Commercial and custom software tools that provide the ability to conduct network

Software Architecture Evolution

DTIC Science & Technology

2013-12-01

system’s major components occurring via a Java Message Service message bus [69]. This architecture was designed to promote loose coupling of soft- ware...play reconfiguration of the system. The components were Java -based and platform-independent; the interfaces by which they communicated were based on...The MPCS database, a MySQL database used for storing telemetry as well as some other information, such as logs and commanding data [68]. This

Command History. 1972-1973. Volume 2. Sanitized

DTIC Science & Technology

1973-07-15

E-48 FULL PETROLEUM STORAGE TANK POLICY .............................. E-48 FA CILITY TRA N SFER... storage mission. The actual cost and . Additionally, A.RVN supported common Items which plans ware being developed by ARVN at year end, were found in the... storage - 1 r fn(S) A, intensive -round and -Number not operationally ready for mainten-program for VNAF personnel was launched in ance- 12 November 1972

Cottonwoods of the Midwest: A Community Profile

DTIC Science & Technology

2008-05-01

and frequently abundant woody vines in floodplain forests include grape, bittersweet, greenbrier, poison ivy, Virginia creeper, and virgin’s bower...Weaver 1968). Major tree, shrub , and vine associates of eastern cottonwood are listed in Table A1. Forbs and graminoids may be understory components of...silver maple (Ware and Smith 1939, Albertson and Weaver 1945, Read 1958). Trees, shrubs , and vines associated with plains cottonwood are listed in

78 FR 59968 - Notice of Intent To Repatriate Cultural Items: U.S. Department of the Interior, Bureau of Indian...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

... definition of a sacred object. Lineal descendants or representatives of any Indian tribe or Native Hawaiian... the definition of sacred object under 25 U.S.C. 3001. This notice is published as part of the National... sacred object is a bowl, identified by staff at the Arizona State Museum as Tusayan White Ware, and...

Computer-Based Learning in Open and Distance Learning Institutions in Nigeria: Cautions on Use of Internet for Counseling

ERIC Educational Resources Information Center

Okopi, Fidel Onjefu; Odeyemi, Olajumoke Janet; Adesina, Adewale

2015-01-01

The study has identified the areas of strengths and weaknesses in the current use of Computer Based Learning (CBL) tools in Open and Distance Learning (ODL) institutions in Nigeria. To achieve these objectives, the following research questions were proposed: (i) What are the computer-based learning tools (soft and hard ware) that are actually in…

[Alzheimer's Therapeutic Research Institute].

PubMed

Shimada, Hiroyuki; Kato, Yuichi; Fujii, Hisako; Mori, Hiroshi

2017-07-01

The Alzheimer's Therapeutic Research Institute (ATRI) was established in 2015 after ATRI director, Paul Aisen, and his fellow experts in therapeutic interventions for Alzheimer's disease (AD) moved from the Alzheimer's Disease Cooperative Study (ADCS) at the University of California to the Keck School of Medicine of the University of Southern California. The National Institute on Aging (NIA) decided to commit $14 million to the ATRI via an Alzheimer's Clinical Trials Consortium (ACTC). The ATRI supports various studies such as the Anti-Amyloid Treatment in Asymptomatic Alzheimer's study ("A4 study"), Alzheimer's Disease Neuroimaging Initiative 3 (ADNI3), Longitudinal Evaluation of Amyloid Risk and Neurodegeneration (LEARN), and The Alzheimer's Disease Neuroimaging Initiative-Depression Project (ADNI-D). The ATRI will share all relevant data and materials with the academic community, corporations, and government organizations. The ATRI is overseen by a Data and Safety Monitoring Board (DSMB), which comprises of leading experts in the field of Alzheimer's research and acts independently. The ATRI is slated to play a central role in clinical dementia research in the US in near future.

Chemicals from coal. Interim report for USBM Synthoil

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, B.C.

1977-10-01

This document contains the results of an investigation to determine the suitability of the USBM Synthoil Product as a petrochemical feedstock. A sample of the whole crude was distilled into two straight run fractions; 350 to 650/sup 0/F mid-distillate and 650/sup 0/F+ residue. Laboratory studies in metal reactors and computer and mathematical simulations were performed to provide overall material balance data for a conceptual plant. The mid-distillate was hydrocracked to produce naphtha which was further processed by hydrotreating and reforming. The reformate from the mid-distillate was then mathematically hydrodealkylated to convert it to a product slate consisting of methane, LPG's,more » benzene, and fuel, along with the total hydrogen consumed. The value of the products obtained per 100 pounds of mid-distillate was $6.89. The high aromatic yield obtained from the hydrocrackate naphtha makes this fraction very attractive as a petrochemical feedstock. Because the gas oil would be extremely difficult to process, it was not investigated.« less

Fabrication and mechanical properties of aluminum composite reinforced with functionalized carbon nanotubes

NASA Astrophysics Data System (ADS)

Alavijeh, Elham Zamani; Kokhaei, Saeed; Dehghani, Kamran

2018-01-01

Composite aluminum alloy (5000 series) and multi-walled carbon nanotubes (MWCNTs) were made using mechanical alloying, cold press and sintering. The quality of interactions between Al powders and CNTs in the metal matrix composite has a significant effect on mechanical properties. Motivated from the properties of functionalized CNTs, the current study use this material rather than the raw type, because of its reactivity. Besides, a poly-vinyl-alcohol pre-mixing is done, the aim of which is to enhance mixing process. The functionalized carbon nanotubes ware made by chemically method through refluxing with nitric acid. By this method functional groups have been created on CNTs surfaces. 1% and 3% functionalized carbon nanotubes were manufactured using the aforementioned method. To provide unbiased comparisons, 1% and 3% with raw CNTs and pure aluminum is produced with same manner. The numerical experiments affirm the superiority of the functionalized carbon nano-tubes in terms of the relative density and hardness of nanocomposites. As a final activity, the Fourier transformation infrared spectroscopy and field emission scanning electron microscopy techniques were used to characterize the carbon nanotubes and the powders.

Wastes as Aggregates, Binders or Additions in Mortars: Selecting Their Role Based on Characterization.

PubMed

Farinha, Catarina Brazão; de Brito, Jorge; Veiga, Rosário; Fernández, J M; Jiménez, J R; Esquinas, A R

2018-03-20

The production of waste has increased over the years and, lacking a recycle or recovery solution, it is forwarded to landfill. The incorporation of wastes in cement-based materials is a solution to reduce waste deposition. In this regard, some researchers have been studying the incorporation of wastes with different functions: aggregate, binder and addition. The incorporation of wastes should take advantage of their characteristics. It requires a judicious analysis of their particles. This research involves the analysis of seven industrial wastes: biomass ashes, glass fibre, reinforced polymer dust, sanitary ware, fluid catalytic cracking, acrylic fibre, textile fibre and glass fibre. The main characteristics and advantages of each waste are enunciated and the best type of introduction in mortars is discussed. The characterization of the wastes as particles is necessary to identify the most suitable incorporation in mortars. In this research, some wastes are studied with a view to their re-use or recycling in mortars. Thus, this research focuses on the chemical, physical and mechanical characterization of industrial wastes and identification of the potentially most advantageous type of incorporation.

Wastes as Aggregates, Binders or Additions in Mortars: Selecting Their Role Based on Characterization

PubMed Central

de Brito, Jorge; Veiga, Rosário

2018-01-01

The production of waste has increased over the years and, lacking a recycle or recovery solution, it is forwarded to landfill. The incorporation of wastes in cement-based materials is a solution to reduce waste deposition. In this regard, some researchers have been studying the incorporation of wastes with different functions: aggregate, binder and addition. The incorporation of wastes should take advantage of their characteristics. It requires a judicious analysis of their particles. This research involves the analysis of seven industrial wastes: biomass ashes, glass fibre, reinforced polymer dust, sanitary ware, fluid catalytic cracking, acrylic fibre, textile fibre and glass fibre. The main characteristics and advantages of each waste are enunciated and the best type of introduction in mortars is discussed. The characterization of the wastes as particles is necessary to identify the most suitable incorporation in mortars. In this research, some wastes are studied with a view to their re-use or recycling in mortars. Thus, this research focuses on the chemical, physical and mechanical characterization of industrial wastes and identification of the potentially most advantageous type of incorporation. PMID:29558418

76 FR 43677 - Funding Down Slate; Training for Real-Time Writers (TRTW) Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... published in the Federal Register. Free Internet access to the official edition of the Federal Register and... or via Internet: [email protected] . If you use a telecommunications device for the deaf (TDD), call the Federal Relay Service (FRS), toll free, at 1-800-877-8339. Individuals with disabilities can...

Focus on the Budget: Rethinking Current Practice. State Policy and College Learning.

ERIC Educational Resources Information Center

Epper, Rhonda Martin, Ed.

The four papers presented here were chosen for presentation at the 1993 annual meeting of the State Higher Education Finance Officers. "A Clean Slate: Principles for Moving To a Value-Driven Higher Education Funding Model," by Brenda Norman Albright and Diane Suitt Gilleland, outlines principles for moving from an accounting-driven…

Temporal and spatial variability in North Carolina piedmont stream temperature

Treesearch

J.L. Boggs; G. Sun; S.G. McNulty; W. Swartley; Treasure E.; W. Summer

2009-01-01

Understanding temporal and spatial patterns of in-stream temperature can provide useful information to managing future impacts of climate change on these systems. This study will compare temporal patterns and spatial variability of headwater in-stream temperature in six catchments in the piedmont of North Carolina in two different geological regions, Carolina slate...

Battelle Education: Metro Institute of Technology

ERIC Educational Resources Information Center

EDUCAUSE, 2015

2015-01-01

This new district partnership school, slated to open in fall 2015, will serve Columbus, OH students in grades 6-13 in a competency-based, blended learning early college high school model that is focused on both college and career success. The Metro Institute of Technology is designed to solve two problems: (1) capable students may struggle in…

Best Practices in Learning Space Design: Engaging Users

ERIC Educational Resources Information Center

Grummon, Phyllis T. H.

2009-01-01

Conceptions of the learning process have varied over time, from seeing learners as "blank slates" for a teacher to fill to the view that, unless a learner is engaged in actively constructing knowledge, little will be learned or retained. As research on the physiological aspects of learning has revealed, active engagement with the learning…

The New Digital Wave: Dive in! Whiteboards Are Quickly Changing How We Teach

ERIC Educational Resources Information Center

Shorr, Pamela Wheaton

2006-01-01

There was a time when the chalkboard was revolutionary. Before it came along, teachers would walk from student to student, drawing problems on individual slates. Now interactive whiteboards promise to reinvent instruction again. Many teachers are now discovering the benefits of using whiteboards. This article presents several strategies on how…

What Gets the Turbine Spinning

ERIC Educational Resources Information Center

Raffan, Deirdre

2005-01-01

One activity that gets children thinking about how electricity is made involves exploring hydro (water) power. Water has been used as a source of energy for thousands of years for mechanical purposes such as grinding corn, bellows for furnaces or sawmills for cutting wood or slate. For about a century hydro power has been producing electricity…

MANUAL: BEST MANAGEMENT PRACTICES FOR POLLUTION PREVENTION IN THE SLABSTOCK AND MOLDED FLEXIBLE POLYURETHANE FOAM INDUSTRY

EPA Science Inventory

The 1990 Clean Air Act Amendments require EPA to develop standards for major emission sources of 189 hazardous air pollutants (HAPs). EPA has identified the flexible polyurethane foam industry as a large emitter of HAPs and has slated the industry for regulation under Title III, ...

Improving the Physical and Social Environment of School: A Question of Equity

ERIC Educational Resources Information Center

Uline, Cynthia L.; Wolsey, Thomas DeVere; Tschannen-Moran, Megan; Lin, Chii-Dean

2010-01-01

This study explored the interplay between quality facilities and school climate, charting the effects of facility conditions on student and teacher attitudes, behaviors, and performance within schools slated for renovations in a large metropolitan school district. The research applied a school leadership-building design model to explore how six…

The Achievement Gap between White and Non-White Students

ERIC Educational Resources Information Center

Rojas-LeBouef, Ana; Slate, John R.

2012-01-01

This Collection contains three seminal modules by Authors Ana Rojas-LeBouef and John R. Slate, professors and researchers from Sam Houston State University in Texas. They are nationally recognized scholars in the area of the academic inequity between White and Non-White students. This paper is divided into three chapters. Chapter 1--The…

Developing Leadership in Faculty and Students: The Power of Service Learning in Teacher Education. Linking Learning with Life.

ERIC Educational Resources Information Center

Swick, Kevin J.; Winecoff, H. Larry; Rowls, Michael; Kemper, Richard; Freeman, Nancy K.; Mason, Janet; Janes, David; Creech, Nena

This guidebook provides information on necessary elements for quality service learning and teacher education (SLATE), emphasizing the nurturing of leadership skills in preservice and inservice teachers. Chapter 1, "Leadership and Service Learning: Interactive Processes that Enhance Teacher Development," describes shared leadership,…

Is Education News Falling off Front Pages?

ERIC Educational Resources Information Center

Maxwell, Lesli A.

2009-01-01

Billions in federal economic-stimulus dollars are slated to be spent to help improve public education, but Americans relying on traditional news outlets are likely to find out little, if anything, about what that effort might mean for the schools in their communities, a new report suggests. That's because education coverage of any type barely…

76 FR 56731 - Oral Rabies Vaccine Trial; Availability of an Environmental Assessment and Finding of No...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-14

...] Oral Rabies Vaccine Trial; Availability of an Environmental Assessment and Finding of No Significant... the Animal and Plant Health Inspection Service relative to an oral rabies vaccination field trial in... INFORMATION CONTACT: Dr. Dennis Slate, Rabies Program Coordinator, Wildlife Services, APHIS, 59 Chennell Drive...

1989-90 Implementation of the Management Information System.

ERIC Educational Resources Information Center

Hamre, William; Holsclaw, Mick

For the past three years, the Board of Governors has made the development and implementation of the California Community College Management Information System (MIS) a major priority. Following two years of pilot testing with five community college districts, statewide implementation of Phase I of MIS is slated to begin in July/August 1989. Several…

The American Odyssey of Maria Montessori.

ERIC Educational Resources Information Center

Kornegay, William

Dr. Maria Montessori's 1913 visit and lecture tour to the United SLates is described in detail with numerous citations from newspaper coverage of the event. The enthusiastic reception extended to the European physician and educator is reviewed, and her meetings, notably with Mr. and Mrs. Alexander Graham Bell, President and Mrs. Woodrow Wilson,…

NREL: International Activities - U.S.-China Renewable Energy Partnership

Science.gov Websites

broader package of cooperative clean energy programs between the two countries. Both sides embraced a collaboration between the two countries. The next REIF is slated for 2019. If you are interested in bolster the deployment of technologies and led to commercial opportunities between the two countries

Periodicals Price Survey 2008: Embracing Openness

ERIC Educational Resources Information Center

Van Orsdel, Lee C.; Born, Kathleen

2008-01-01

Evidence for open access as an emergent, global state of mind is everywhere. The "New York Times" went "open" last September, and the "Wall Street Journal" is slated to follow. Increasingly, scholarly communities are breaking with tradition and calling for the open sharing of research, software, and data. Amongst these global initiatives is the…

Nature Lessons

ERIC Educational Resources Information Center

Irvin, Thomas M.

2007-01-01

In 2000, Oil City Elementary School faced collapsing enrollment, a high-risk student population, and a reputation as the place for kids who were not smart enough to attend the nearby academic magnet. The school was slated for closure. But the school had a history of connection to Oil City, a town of 1,500 in western Louisiana, and school staff…

Using urban forest assessment tools to model bird habitat potential

Treesearch

Susannah B. Lerman; Keith H. Nislow; David J. Nowak; Stephen DeStefano; David I. King; D. Todd Jones-Farrand

2014-01-01

The alteration of forest cover and the replacement of native vegetation with buildings, roads, exotic vegetation, and other urban features pose one of the greatest threats to global biodiversity. As more land becomes slated for urban development, identifying effective urban forest wildlife management tools becomes paramount to ensure the urban forest provides habitat...

Village Power Exhibit Featured at NREL's Visitors Center

Science.gov Websites

World Energy" Expo Slated for February-April For more information contact: Gary Schmitz, 303-275 is a feature attraction of NREL's Visitors Center "Powering Our Lives, Powering Our World" , Powering Our World" Energy Expo begins Feb. 20 with the opening of the Village Power exhibit, and

Christopher Benfey's Flight of Fancy

ERIC Educational Resources Information Center

Klein, Julia M.

2008-01-01

This article profiles Christopher Benfey, 53--an art critic for Slate, a poet, and a prolific literary essayist for such venues as "The New York Times Book Review, The New Republic," and "The New York Review of Books." His latest book, "A Summer of Hummingbirds: Love, Art, and Scandal in the Intersecting Worlds of Emily…

Bioremediation of Cd-DDT co-contaminated soil using the Cd-hyperaccumulator Sedum alfredii and DDT-degrading microbes

USDA-ARS?s Scientific Manuscript database

The development of an integrated strategy for the remediation of soil co-contaminated by heavy metals and persistent organic pollutants is a major research priority for the decontamination of soil slated for use in agricultural production. The objective of this study was to develop a bioremediation ...

Do Carrots Work? Examining the Effectiveness of EPA's Compliance Assistance Program

ERIC Educational Resources Information Center

Stafford, Sarah

2012-01-01

The role of compliance assistance in the U.S. Environmental Protection Agency's overall enforcement strategy has been quite variable over the past decade and a half, increasing in prominence under the Bush administration and now slated for significantly reduced funding under the Obama administration. While theoretical models and anecdotal evidence…

Cognitions about bodily purity attenuate stress perception.

PubMed

Kaspar, Kai; Cames, Sarah

2016-12-09

Based on the assumption that physical purity is associated with a clean slate impression, we examined how cognitions about bodily cleanliness modulate stress perception. Participants visualized themselves in a clean or dirty state before reporting the frequency of stress-related situations experienced in the past. In Study 1 (n = 519) and Study 2 (n = 647) cleanliness versus dirtiness cognitions reliably reduced stress perception. Further results and a mediation analysis revealed that this novel effect was not simply driven by participants' cognitive engagement in stress recall. Moreover, we found that participants' temporal engagement in the recall of past stressful events negatively correlated with the amount of perceived stress, indicating an ease-of-retrieval phenomenon. However, a direct manipulation of the number of recalled stressful events in Study 3 (n = 792) showed the opposite effect: few versus many recalled events increased the perceived frequency of past stress-related situations. Overall, these novel results indicate an interesting avenue for future research on cognitively oriented stress reduction interventions, add to the literature on purity-related clean slate effects, and may help to better understand washing rituals in patients with obsessive-compulsive disorders.

Sulfur Isotropic Studies of Archean Slate and Graywacke from Northern Minnesota: Evidence for the Existence of Sulfate Reducing Bacteria

NASA Technical Reports Server (NTRS)

Ripley, E. M.; Nicol, D. L.

1979-01-01

Sulfur isotopic studies of pyrite from metasediments in the 2.6 b.y. old Deer Lake greenstone sequence, Minnesota, were conducted in order to evaluate the possible importance of sulfate reducing bacteria in sulfide formation. Pyrite occurs as ovules up to 2 cm in diameter within graphitic slates, and as fine disseminations in metagraywacke units. SEM studies indicate the pyrite is framboidal in morphology. Delta notation values of pyrite from the Deer Lake sediments range from -2.3 to 11.1 0/00, with a peak at approximately +2 o/oo. Isotopic data is consistent with either high temperature inorganic reduction of circulating seawater sulfate, or low temperature bacterial reduction. However, the lack of sulfide bands or massive occurrences in the sediments, the restriction of pyrite mineralization to the sediments, and the absence of evidence for hot spring activity suggest that a diagenetic origin of pyrite is more feasible. Sulfide in such an environment would be produced principally by the action of sulfate reducing bacteria.

Arsenic in groundwater in the North Carolina Eastern slate belt (Esb): Nash and halifax counties, north carolina

USGS Publications Warehouse

Reid, J.C.; Haven, W.T.; Eudy, D.D.; Milosh, R.M.; Stafford, E.G.

2010-01-01

Naturally occurring arsenic-contaminated groundwater is present within the Eastern Slate Belt (ESB) of North Carolina. Long-term, integrated geologic and geo-chemical investigations havedetermined the presence of arsenic by analyzing precipitates from first and second order streams under base flow conditions. When groundwater discharges into streams, arsenic and other metals are precipitated from solution, due to redox changes between the subsurface and surface environments. Analyses (As, base metals, Fe and Mn) were determined following chemical extraction ofnaturally occurring manganese-iron oxide-coatings, which had precipitated from solution onto stream-bed cobbles. Additionally, artificial redox fronts were produced by placing ceramic tilesin streambeds to collect and analyze oxide precipitates. Thermochemical plots from these data, as well as information from respective stream water measurements (pH and Eh), water sampling, and rock chemical analyses indicate mobile arsenic in predicted stability fields. Initial results show that naturally occurring arsenic-contaminated groundwater is present within the study area. However, the resulting oxidation and pre-cipitation within streams appreciably removes thiscontaminant from surface water solution.

U.S. National Science Foundation Slated for Large Budget Increase

NASA Astrophysics Data System (ADS)

Showstack, Randy

2010-03-01

Although the Obama administration has promoted its proposed $3.8 trillion federal budget for fiscal year (FY) 2011 as one that works toward reining in budget deficits and living within the nation's means, research is among the areas slated for increases. The National Science Foundation (NSF) would receive $7.42 billion, an 8% increase above the FY 2010 enacted level of $6.87 billion, which pleases NSF administrators. This proposal would keep the agency on track for doubling its budget between about 2007 and 2017. “The president sees science as a way to build our economy. It’s a way to make the nation strong in the future. It’s a way of bringing change in society, and in addressing some of the global challenges that we are facing,” NSF director Arden Bement Jr. explained at a 1 February briefing. Bement, who has been at the helm of the agency for more than 6 years, announced in early February that he is leaving later this year to head up the Global Policy Research Institute at Purdue University.

Microsatellite marker-based genetic analysis of relatedness between commercial and heritage turkeys (Meleagris gallopavo).

PubMed

Kamara, D; Gyenai, K B; Geng, T; Hammade, H; Smith, E J

2007-01-01

The turkey is second only to the chicken in importance as an agriculturally important poultry species. Unlike the chicken, however, genetic studies of the turkey continue to be limited. For example, to date, many genomic investigations have been conducted to characterize genetic relationships between commercial (CO) and non-CO chicken breeds, whereas the nature of the genetic relatedness between CO and heritage turkeys remains unknown. The objective of the current research was to use microsatellites to analyze the genetic relatedness between CO and heritage domestic turkeys including Narragansett, Bourbon Red, Blue Slate, Spanish Black, and Royal Palm. Primer pairs specific for 10 previously described turkey microsatellite markers were used. The phylogenetic analysis showed that the Blue Slate, Bourbon Red, and Narragansett were genetically closely related to the CO strain, with a Nei distance of 0.30, and the Royal Palm and Spanish Black were the least related to the CO strain, with Nei distances of 0.41 and 0.40, respectively. The present work provides a foundation for the basis of using heritage turkeys to genetically improve CO populations by introgression.

Antioxidant Activity and Cytotoxicity Effect of Cocoa Beans Subjected to Different Processing Conditions in Human Lung Carcinoma Cells

PubMed Central

Bauer, Deborah; de Abreu, Joel Pimentel; Oliveira, Hilana Salete Silva; Goes-Neto, Aristoteles; Koblitz, Maria Gabriela Bello

2016-01-01

Lung cancer is a common malignancy in men and the second leading cause of cancer-related mortality in men in the western world. Phenolic cocoa ingredients have a strong antioxidative activity and the potential to have a protective effect against cancer. In the present study, we have evaluated the influence of cocoa beans subjected to different processing conditions on cell viability and apoptosis of human lung cancer cells (A549). We measured the viability of lung cells treated with cocoa beans, unroasted slates (US), roasted slates (RS), unroasted well fermented (UWF) cocoa, and roasted well fermented (RWF) cocoa for 24 h. Using an MTT assay, we observed a decrease in the viability of A549 cells after treatment with cocoa bean extracts. Flow cytometer analysis revealed that cocoa beans increased the percentage of cells in sub-G1 phase and promoted up to twofold increase of apoptotic cells when compared to the control group. Taken together, the present study suggests that cocoa beans may have a protective effect against lung cancer. PMID:27034742

AIS Spectra for Stressed and Unstressed Plant Communities in the Carolina Slate Belt

NASA Technical Reports Server (NTRS)

Wickland, D. E.

1985-01-01

Airborne imaging spectrometer (AIS) data were collected over a number of derelict heavy metal mine sites in the Carolina slate belt of North Carolina. A 32 channel (1156 to 1456 nm) data set was acquired in October, 1983 at the time of peak fall foliage display, and a 128 channel (1220 to 2420) data set was acquired near the end of the spring leaf flush in May, 1984. Spectral curves were extracted from the AIS data for differing ground cover types (e.g., pine forests, mixed deciduous forests, mine sites, and pastures). Variation in the width of an absorption feature located at approximately 1190 nm has been related to differences in forest type. Small differences in the location and shape of features in the near infrared plateau (1156 to 1300 nm) and the region 2000 to 2420 nm have yet to be evaluated. Because these variations were subtle, and because atmospheric effects were apparent in the data, high priority must be assigned to devising a means of removing atmospheric effects from AIS spectra.

Tuning the catalytic CO hydrogenation to straight- and long-chain aldehydes/alcohols and olefins/paraffins

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xiang, Yizhi; Kruse, Norbert

Here, the catalytic CO hydrogenation is one of the most versatile large-scale chemical syntheses leading to variable chemical feedstock. While traditionally mainly methanol and long-chain hydrocarbons are produced by CO hydrogenation, here we show that the same reaction can be tuned to produce long-chain n-aldehydes, 1-alcohols and olefins, as well as n-paraffins over potassium-promoted CoMn catalysts. The sum selectivity of aldehydes and alcohols is usually >50 wt% whereof up to ~97% can be n-aldehydes. While the product slate contains ~60% n-aldehydes at /p CO=0.5, a 65/35% slate of paraffins/alcohols is obtained at a ratio of 9. A linear Anderson–Schulz–Flory behaviour,more » independent of the /p CO ratio, is found for the sum of C 4+ products. We advocate a synergistic interaction between a Mn 5O 8 oxide and a bulk Co 2C phase, promoted by the presence of potassium, to be responsible for the unique product spectra in our studies.« less

Tuning the catalytic CO hydrogenation to straight- and long-chain aldehydes/alcohols and olefins/paraffins

DOE PAGES

Xiang, Yizhi; Kruse, Norbert

2016-10-06

Here, the catalytic CO hydrogenation is one of the most versatile large-scale chemical syntheses leading to variable chemical feedstock. While traditionally mainly methanol and long-chain hydrocarbons are produced by CO hydrogenation, here we show that the same reaction can be tuned to produce long-chain n-aldehydes, 1-alcohols and olefins, as well as n-paraffins over potassium-promoted CoMn catalysts. The sum selectivity of aldehydes and alcohols is usually >50 wt% whereof up to ~97% can be n-aldehydes. While the product slate contains ~60% n-aldehydes at /p CO=0.5, a 65/35% slate of paraffins/alcohols is obtained at a ratio of 9. A linear Anderson–Schulz–Flory behaviour,more » independent of the /p CO ratio, is found for the sum of C 4+ products. We advocate a synergistic interaction between a Mn 5O 8 oxide and a bulk Co 2C phase, promoted by the presence of potassium, to be responsible for the unique product spectra in our studies.« less

Management Aspects of Software Maintenance.

DTIC Science & Technology

1984-09-01

educated in * the complex nature of software maintenance to be able to properly evaluate and manage the software maintenance effort. In this...maintenance and improvement may be called "software evolution". The soft- ware manager must be Educated in the complex nature cf soft- Iware maintenance to be...complaint of error or request for modification is also studied in order to determine what action needs tc be taken. 2. Define Objective and Approach :

The Role of Context in the Development of Second Language Interactional Competence: A Comparative Microanalysis of Topic Initiation Practices in the Study Abroad Homestay and the Language Classroom

ERIC Educational Resources Information Center

Van Booven, Christopher D.

2017-01-01

This dissertation research aims to better specify the role of context in the development of second language interactional competence. Drawing on conversation-analytic methods and Wong and Waring's (2010) model of interactional practices, I described and compared the opportunities that two study abroad contexts--the homestay and the language…

Controlling the Nuclear Polarization in Quantum Dots Using Optical Pulse Shape with a Modest Bandwidth

DTIC Science & Technology

2011-03-23

R17339 (1996). 22A. S. Bracker, E. A. Stinaff, D. Gammon, M. E. Ware, J. G. Tischler, A. Shabaev, A. L. Efros, D. Park, D. Gershoni, V. L. Korenev , and I...056603 (2010). 26V. L. Korenev , Phys. Rev. Lett. 99, 256405 (2007). 27J. J. Baumberg, S. A. Crooker, D. D. Awschalom, N. Samarth, H. Luo, and J. K

Genomic Comparison of Escherichia coli O104:H4 Isolates from 2009 and 2011 Reveals Plasmid, and Prophage Heterogeneity, Including Shiga Toxin Encoding Phage stx2

DTIC Science & Technology

2012-11-01

306. 70. Smith DL, Rooks DJ, Fogg PC, Darby AC, Thomson NR, et al. (2012) Comparative genomics of Shiga toxin encoding bacteriophages. BMC Genomics 13...genomic rearrangements to lysogenic conversion. Microbiol Mol Biol Rev 68: 560–602. 77. Smith DL, Wareing BM, Fogg PCM, Riley LM, Spencer M, et al

Bacteria, fungi and protozoa paper

EPA Pesticide Factsheets

Bacteria and fungi in source and treated drinking waterThis dataset is associated with the following publication:King , D., S. Pfaller , M. Donohue , S. Vesper , E. Villegas , M. Ware , S. Glassmeyer , M. Vogal, E. Furlong, and D. Kolpin. Microbial pathogens in source and treated waters from drinking water treatment plants in the United States and implications for human health. SCIENCE OF THE TOTAL ENVIRONMENT. Elsevier BV, AMSTERDAM, NETHERLANDS, 562: 987–995, (2016).

Principles and Foundations for Fractionated Networked Cyber-Physical Systems

DTIC Science & Technology

2012-07-13

spectrum between autonomy to cooperation. Our distributed comput- ing model is based on distributed knowledge sharing, and makes very few assumptions but...over the computation without the need for explicit migration. Randomization techniques will make sure that enough di- versity is maintained to allow...small UAV testbed consisting of 10 inex- pensive quadcopters at SRI. Hard ware-wise, we added heat sinks to mitigate the impact of additional heat that

CrossTalk: The Journal of Defense Software Engineering. Volume 21, Number 1

DTIC Science & Technology

2008-01-01

project manage- ment and the individual components of the software life-cycle model ; it will be awarded for...software professionals that had been formally educated in software project manage- ment. The study indicated that our industry is lacking in program managers...soft- ware developments get bigger, more complicated, and more dependent on senior software pro- fessionals to get the project on the right path

Science Education Standards

NASA Astrophysics Data System (ADS)

Moore, John W.

1998-04-01

1.National Science Education Standards; National Research Council, National Academy Press: Washington, DC, 1996. 2.Benchmarks for Science Literacy; American Association for the Advancement of Science, Oxford University Press: New York, 1993. 3.Chemistry in the National Science Education Standards; American Chemical Society Education Division, Washington, DC, 1997. 4.Crosby, G. A. J. Chem. Educ. 1996, 73, A200-A201. 5.Ware, S. A. J. Chem. Educ. 1996, 73, A307-A308.

Automating Software Design Metrics.

DTIC Science & Technology

1984-02-01

INTRODUCTION 1 ", ... 0..1 1.2 HISTORICAL PERSPECTIVE High quality software is of interest to both the software engineering com- munity and its users. As...contributions of many other software engineering efforts, most notably [MCC 77] and [Boe 83b], which have defined and refined a framework for quantifying...AUTOMATION OF DESIGN METRICS Software metrics can be useful within the context of an integrated soft- ware engineering environment. The purpose of this

Southeast Asia Report.

DTIC Science & Technology

1987-05-20

Vigilantism (Ninez Cacho-Olivares; BUSINESS DAY, 2 Apr 87) 29 - b ’Fanatical1 Anticommünist Group Initiation (THE MANILA TIMES, 3 Apr 87) J ...typical American pro- blem: the absence of effective law and order in a frontier re- gion," says Richard Maxwell Brown in an official report for the... j household wares, toys, ’ chinaware, tobacco, ply- wood, electronic, micro- circuits, tennis balls and acrylic yarn. Bananas are seen to have

Security Awareness Bulletin. Number 2-91, September 1991

DTIC Science & Technology

1991-09-01

governments, competitors, In our rapidly changing workplace, computers and those having criminal intent, that uncontrolled access routinely communicate with...same as above; rental fee is slightly higher. Securily A wareness Bulletin 10 Number 2-91 New AIS Requirements in the Defense Industrial Security...original file copy. But remember, check the original for viruses 6. Files grow in size. Infamous to the Nvir, this before locking and relying upon it as a

Stress Evaluation for the TOW Accuracy Study

DTIC Science & Technology

1991-11-01

possibi_2 effects on performance that ware because of test site factors could not be Assased . Implications of confounding order with test site were...with extended wear. There is no health risk in wearing these devices. The system is described in detail in Appendix B. The activity monitors were used... chemical protective clothing (MOPP IV). All runs were completed during daylight hoars. Each gunner completed the state questionnaire battery about 15

An Interactive Computer Program for Assessing and Using Multiattribute Utility Functions

DTIC Science & Technology

1975-06-01

involved evaluating five options for dealing with the question of legalizing prostitution in the Boston area. These options were strict prohibition...MUFCAP Has 69 Been Applied 5.4.1 Evaluating Health Plans 69 5.4.2 Evaluating Policies for Dealing with 69 Prostitution in the Boston...toleration or benign neglect, regula- tion of prostitution , licensing of individual prostitutes and decriminalization. The attributes ware chosen to

A Cultural Resources Testing Program, Holbrook, Arizona

DTIC Science & Technology

1989-01-01

suggest that the area around Holbrook was affiliated with the Kayenta Anasazi. Close ties, however, were maintained between groups residing on the Puerco...and the Little Colorado rivers, indicated by the common occurrence of early types of Cibola White ware along with the predominant Kayenta types. Most...investigators agree that the Petrified Forest represented a boundary between the Cibola and Kayenta areas (Gumerman and Skinner 1968:188; Granger and

51. UPPER CHAMBER OF BISCUIT KILN No. 4, FROM THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

51. UPPER CHAMBER OF BISCUIT KILN No. 4, FROM THE SECOND FLOOR. ALL BRICK KILNS AT THE MORAVIAN POTTERY AND TILE WORKS HAD TWO CHAMBERS. WARE WAS STACKED IN THE LOWER CHAMBERS FOR FIRING AND THE UPPER CHAMBERS PROVIDED ACCESS TO FLUES AND DAMPERS FROM THE SECOND FLOOR. - Moravian Pottery & Tile Works, Southwest side of State Route 313 (Swamp Road), Northwest of East Court Street, Doylestown, Bucks County, PA

Böttger stoneware from North America and Europe; are they authentic

NASA Astrophysics Data System (ADS)

Swann, Charles P.; Nelson, Christina H.

2000-03-01

In the early 18th century, Johann Friedrich Böttger, an alchemist recently arrived in Dresden, was assigned to ceramic experimentation under the orders of Augustus the Strong, Elector of Saxony and King of Poland. The Elector and his advisors hoped to discover the secret of making hard paste porcelain like the wares imported into Europe from China and Japan. In 1706-1707, Böttger produced his first ceramic body, a red stoneware similar to the wares produced in Yixing, China. The first objects were made following the forms of chinese prototypes or European metalwork of the period. Recently, the authenticity of a number of `Böttger' objects in various museums and private collections in North America and Europe has been questioned. To aide in resolving these questions several non-destructive analytical techniques have been employed, the most important being PIXE. This report is on an initial study of 25 objects with 16 elements from Al to Zr and Pb being analysed. The results strongly suggest three different groupings, one of objects from the Meissen factory during the 20th century, one from the work of Böttger himself early in the 18th century and one from an as yet unknown time period and site. The first two groups were previously identified by one of the authors (C.N.).

Biomimetic hydrogels for biosensor implant biocompatibility: electrochemical characterization using micro-disc electrode arrays (MDEAs).

PubMed

Justin, Gusphyl; Finley, Stephen; Abdur Rahman, Abdur Rub; Guiseppi-Elie, Anthony

2009-02-01

Our interest is in the development of engineered microdevices for continuous remote monitoring of intramuscular lactate, glucose, pH and temperature during post-traumatic hemorrhaging. Two important design considerations in the development of such devices for in vivo diagnostics are discussed; the utility of micro-disc electrode arrays (MDEAs) for electrochemical biosensing and the application of biomimetic, bioactive poly(HEMA)-based hydrogel composites for implant biocompatibility. A poly(HEMA)-based hydrogel membrane containing polyethylene glycol (PEG) was UV cross-linked with tetraethyleneglycol diacrylate following application to MDEAs (50 mum discs) and to 250 mum diameter gold electrodes within 8-well culture ware. Cyclic voltammetry (CV) of the MDEAs revealed a reduction in the apparent diffusion coefficient of ferrocenemonocarboxylic acid (FcCO(2)H), from 6.68 x 10(-5) to 6.74 x 10(-6) cm(2)/s for the uncoated and 6 mum thick hydrogel coated devices, respectively. Single frequency (4 kHz) temporal impedance measurements of the hydrogels in the 8-well culture ware showed a reversible 5% change in the absolute impedance of the hydrogels when exposed to a pH change between 6.1 to 7.2 and a 20% drop between pH 6.1 and 8.8.

Ceramic ware waste as coarse aggregate for structural concrete production.

PubMed

García-González, Julia; Rodríguez-Robles, Desirée; Juan-Valdés, Andrés; Morán-Del Pozo, Julia M; Guerra-Romero, M Ignacio

2015-01-01

The manufacture of any kind of product inevitably entails the production of waste. The quantity of waste generated by the ceramic industry, a very important sector in Spain, is between 5% and 8% of the final output and it is therefore necessary to find an effective waste recovery method. The aim of the study reported in the present article was to seek a sustainable means of managing waste from the ceramic industry through the incorporation of this type of waste in the total replacement of conventional aggregate (gravel) used in structural concrete. Having verified that the recycled ceramic aggregates met all the technical requirements imposed by current Spanish legislation, established in the Code on Structural Concrete (EHE-08), then it is prepared a control concrete mix and the recycled concrete mix using 100% recycled ceramic aggregate instead of coarse natural aggregate. The concretes obtained were subjected to the appropriate tests in order to conduct a comparison of their mechanical properties. The results show that the concretes made using ceramic sanitary ware aggregate possessed the same mechanical properties as those made with conventional aggregate. It is therefore possible to conclude that the reuse of recycled ceramic aggregate to produce recycled concrete is a feasible alternative for the sustainable management of this waste.

Left ventricular assist device: exercise capacity evolution and rehabilitation added value.

PubMed

Lamotte, Michel X; Chimenti, Sara; Deboeck, Gael; Gillet, Alexis; Kacelenenbogen, Raymond; Strapart, Jonathan; Vandeneynde, Frédéric; Van Nooten, Guido; Antoine, Martine

2018-06-01

With more than 15,000 implanted patients worldwide and a survival rate of 80% at 1-year and 59% at 5-years, left ventricular assist device (LVAD) implantation has become an interesting strategy in the management of heart failure patients who are resistant to other kinds of treatment. There are limited data in the literature on the change over time of exercise capacity in LVAD patients, as well as limited knowledge about the beneficial effects that rehabilitation might have on these patients. Therefore, the aim of our study was to evaluate the evolution of exercise capacity on a cohort of patients implanted with the same device (HeartWare © ) and to analyse the potential impact of rehabilitation. Sixty-two patients implanted with a LVAD between June 2011 and June 2015 were screened. Exercise capacity was evaluated by cardiopulmonary exercise testing at 6 weeks, 6 and 12 months after implantation. We have observed significant differences in the exercise capacity and evolution between the trained and non-trained patients. Some of the trained patients nearly normalised their exercise capacity at the end of the rehabilitation programme. Exercise capacity of patient implanted with a HeartWare © LVAD increased in the early period after implantation. Rehabilitation allowed implanted patients to have a significantly better evolution compared to non-rehabilitated patients.

Metal cycling along the northwestern Seward Peninsula, Alaska: A possible natural cause of metal contamination in the arctic: A section in Geologic studies in Alaska by the U.S. Geological Survey, 1997

USGS Publications Warehouse

Parnow, C.C.; Goldfarb, Richard J.; Kelley, Karen D.; York, Geoffrey S.

1999-01-01

The northwestern Seward Peninsula was targeted for detailed geochemical study after evaluation of data collected during the NURE reconnaissance-level program indicated anomalously high arsenic (60-635 ppm) concentrations in stream sediments. The arsenic is associated with tin skarn, greisen, and replacement deposits in the western Seward Peninsula. Surficial sampling of waters and sediments indicate that arsenic is being transported detritally but that solution transport is insignificant. Our new data indicate that sediments downstream from these tin occurrences are characterized by anomalous values of As (85- 530 ppm) and Sn (14-36 ppm), as well as consistent anomalies of Ag, Be, Cu, Sb, and W. Stream sediments collected from drainages underlain by slate, but distal to the exposed tin occurrences, are characterized by background levels of As ( 10-60 ppm), Li (16-80 ppm), Sn (5-14 ppm), and W (5-10 ppm). These background levels for As and Sn are much higher than concentrations in typical slates and suggest a broad, weak hydrothermal alteration during mineral-deposit formation in much of the study area. A consistent pattern of Ca>>Mg>Na>K and generally alkaline pH (7 .2-8.2) characterize waters throughout the study area. Dissolved sulfate concentrations range from 10 to 40 ppm for waters draining slates and from 3 to 20 ppm for water draining carbonates. The waters collected in areas of known tin occurrences in the Potato Mountain area are characterized by increased dissolved sulfate (43-75 ppm) and are generally acidic (pH 4.7-6.5), but most trace metals are at or below detection limits. Dissolved arsenic concentrations in the areas of known tin occurrences are at or below 2 ppb. Our data suggest that detrital arsenic and tin from mineral occurrences may be naturally entering the nearshore marine environment.

New Observations at the Slate Islands Impact Structure, Lake Superior

NASA Technical Reports Server (NTRS)

Dressler, B. O.; Sharpton, V. L.; Schnieders, B.; Scott, J.

1995-01-01

Slate Islands, a group of 2 large and several small islands, is located in northern Lake Superior, approximately 10 km south of Terrace Bay. Shatter cones, breccias and shock metamorphic features provide evidence that the Slate Islands Structure was formed as a result of asteroid or comet impact. Most of the island group is believed to represent the central uplift of a complex impact crater. The structure possibly has a diameter of about 32 km. For Sage (1978, 1991) shock metamorphic features, shatter cones and pervasive rock brecciation are the results of diatreme activity. The present investigations represent the second year of a co-operative study of the Lunar and Planetary Institute, Houston, Texas and the Field Services Section (Northwest) of the Ontario Geological Survey. The objective of this investigation is to come to a better understanding of the formation of mid-size impact structures on Earth and the planets of the solar system. Impact processes played a fundamental role in the formation of the planets and the evolution of life on Earth. Meteorite and comet impacts are not a phenomenon of the past. Last year, more than 20 pieces of the Shoemaker-Levy 9 impacted on Jupiter and the Tunguska comet impacted in Siberia in the early years of this century. The study of impact processes is a relatively young part of geoscience and much is still to be learnt by detailed field and laboratory investigations. The State Islands Structure has been selected for the present detailed investigations because of the excellent shoreline outcrops of rock units related to the impact. The structure is a complex impact crater that has been eroded so that important lithological and structural elements are exposed. We know of no other mid-size terrestrial impact structure with equal or better exposures. In this publication we present preliminary results of our 1994 and 1995 field and laboratory investigations. We have tentatively identified a few impact melt and a considerable number of suevite occurrences.

Study on the chemical composition features of Longquan celadon excavated from the Chuzhou site of Huai'an City in Jiangsu Province by EDXRF

NASA Astrophysics Data System (ADS)

Li, Li; Feng, Song-Lin; Feng, Xiang-Qian; Xu, Qing; Yan, Ling-Tong; Ma, Bo; Huo, Hua

2011-07-01

A mass of Longquan celadon shards were excavated from the Chuzhou site of Huai'an City in Jiangsu Province, China. These celadon shards were fired during the period of the Late Yuan Dynasty to the Tianshun era of the Ming Dynasty, as identified by archaeologists at Nanjing Museum. In order to research the chemical composition features of this ancient celadon porcelain, energy dispersive X-ray fluorescence (EDXRF) for non-destructive analysis was used to determine the chemical composition of the porcelain body and glaze in these shards. The results indicate that Ti and Fe in the body of Longquan celadon are characteristic elements which can distinguish porcelain produced during the Late Yuan Dynasty from those produced in the Ming Dynasties. The results of the principal component analysis (PCA) show that different body and glaze raw materials were used for the production of porcelain in different periods and the raw materials of the body and glaze are also different for various vessel shapes. The chemical compositions in the porcelain body of civilian ware are slightly different. The imperial and civilian Longquan celadon porcelains produced during the Hongwu era to the Tianshun era of the Ming Dynasty are distinguishable by the MnO, Fe2O3, Rb2O and SrO content in their porcelain glaze.

29 CFR 570.53 - Coal-mine occupations (Order 3).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Coal-mine occupations (Order 3). 570.53 Section 570.53... § 570.53 Coal-mine occupations (Order 3). (a) Finding and declaration of fact. All occupations in or about any coal mine, except the occupation of slate or other refuse picking at a picking table or...

29 CFR 570.53 - Coal-mine occupations (Order 3).

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Coal-mine occupations (Order 3). 570.53 Section 570.53... § 570.53 Coal-mine occupations (Order 3). (a) Finding and declaration of fact. All occupations in or about any coal mine, except the occupation of slate or other refuse picking at a picking table or...

29 CFR 570.53 - Coal-mine occupations (Order 3).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Coal-mine occupations (Order 3). 570.53 Section 570.53... § 570.53 Coal-mine occupations (Order 3). (a) Finding and declaration of fact. All occupations in or about any coal mine, except the occupation of slate or other refuse picking at a picking table or...

29 CFR 570.53 - Coal-mine occupations (Order 3).

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Coal-mine occupations (Order 3). 570.53 Section 570.53... § 570.53 Coal-mine occupations (Order 3). (a) Finding and declaration of fact. All occupations in or about any coal mine, except the occupation of slate or other refuse picking at a picking table or...

29 CFR 570.53 - Coal-mine occupations (Order 3).

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Coal-mine occupations (Order 3). 570.53 Section 570.53... § 570.53 Coal-mine occupations (Order 3). (a) Finding and declaration of fact. All occupations in or about any coal mine, except the occupation of slate or other refuse picking at a picking table or...

76 FR 29227 - Funding Down Slate; Indian Education Professional Development Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... this document is the document published in the Federal Register. Free Internet access to the official... free, at 1-800-877-8339. Individuals with disabilities can obtain this document in an accessible format... (PDF). To use PDF you must have Adobe Acrobat Reader, which is available free at the site. You may also...

31 CFR 597.509 - Transactions with entities under the control of the Palestinian President and certain other...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Council; (3) Members of the Palestinian Legislative Council (PLC) who were not elected to the PLC on the... institutions are authorized to reject transactions with members of the Palestinian Legislative Council (PLC) who were elected to the PLC on the party slate of Hamas or any other Foreign Terrorist Organization...

31 CFR 597.509 - Transactions with entities under the control of the Palestinian President and certain other...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Council; (3) Members of the Palestinian Legislative Council (PLC) who were not elected to the PLC on the... institutions are authorized to reject transactions with members of the Palestinian Legislative Council (PLC) who were elected to the PLC on the party slate of Hamas or any other Foreign Terrorist Organization...

New Orleans Eyed as Clean Educational Slate

ERIC Educational Resources Information Center

Robelen, Erik W.

2005-01-01

New Orleans will probably never be the same after Hurricane Katrina. But when it comes to schools, many educators and analysts say that might not be all bad. Both in Louisiana and beyond, the wreckage in the Big Easy has sparked thinking about how the city might reinvent its beleaguered school system, in difficult straits long before the storm was…

STS-28 Columbia, Orbiter Vehicle (OV) 102, roll over to KSC OPF

NASA Image and Video Library

1989-01-24

S89-28090 (24 Jan 1989) --- The orbiter Columbia, slated for mission STS-28 is rolled over from the Orbiter Maintenance and Refurbishment Facility to the Orbiter Processing Facility bay 1 to begin processing for its mission in July 1989. The Department of Defense dedicted mission will be commanded by astronaut Brewster Shaw.

Terrain and vegetation structural influences on local avian species richness in two mixed-conifer forests

Treesearch

Jody C. Vogeler; Andrew T. Hudak; Lee A. Vierling; Jeffrey Evans; Patricia Green; Kerri T. Vierling

2014-01-01

Using remotely-sensed metrics to identify regions containing high animal diversity and/or specific animal species or guilds can help prioritize forest management and conservation objectives across actively managed landscapes. We predicted avian species richness in two mixed conifer forests, Moscow Mountain and Slate Creek, containing different management contexts and...

In Rural India, an Ambitious Academic Vision

ERIC Educational Resources Information Center

Neelakantan, Shailaja

2007-01-01

A few miles outside the town of Puri, in the eastern Indian state of Orissa, lies Beladala, a farming village of thatch-roofed homes. Beladala and 17 other villages, comprising farms, homesteads, and pastures, are slated to be acquired by Anil Agarwal, a metals-and-mining mogul whose company, Vedanta Resources, has made the 53-year-old…

Exploring Cultural Context and School Leadership: Conceptualizing an Indigenous Model of Có Uy School Leadership in Vietnam

ERIC Educational Resources Information Center

Truong, Thang Dinh; Hallinger, Philip

2017-01-01

The need for empirical research on leadership in educational organizations across more diverse national settings frames the purpose of the current study of principal leadership in Vietnam. To date, the international literature on school leadership in Vietnam is virtually a blank slate. This research aimed at describing how Vietnamese school…

Seeking the Balance Between Government and Industry Interests in Software Acquisitions. Volume 1. A Basis for Reconciling DoD and Industry Needs for Rights in Software

DTIC Science & Technology

1987-06-01

Facilitator Robert Voss, Esq. Private Consultant, Honeywell, Inc. Institute for Defense Analyses Robert Adams , Esq. Naval Training Systems Center Mr...Systems Command Leonard Rawlcz, Esq. Skadden, Arps, Slate, Meagher & Flom Ansel Schwartz, Esq. Reed Smith Shaw & McClay Michael Yatsko, Esq

USE OF CONTINUOUS DATALOGGERS TO ASSESS THE TEMPORAL AND SPATIAL VARIATION OF GROUND WATER/SURFACE WATER INTERACTION BEFORE AND AFTER STREAM RESTORATION

EPA Science Inventory

Minebank Run is a degraded second-order flashy urban stream in Baltimore County which is slated to undergo restoration in August 2003 to re-establish geomorphic stability. We are currently conducting an intensive investigation of surface water/ground water interaction and nutrien...

U.S.-MEXICO BORDER PROGRAM ARIZONA BORDER STUDY--STANDARD OPERATING PROCEDURE FOR BATCHING OF LABORATORY DATA (UA-C-7.0)

EPA Science Inventory

The purpose of this SOP is to describe the steps involved in batching the physical laboratory data forms generated by the Arizona Border Study and slated for data entry. It applies to all physical laboratory data forms entered for this study. This procedure was followed to ensu...

16. Detail, northeast facade, operator's bow window and tower; note ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

16. Detail, northeast facade, operator's bow window and tower; note condition of slates on tower skirt roof, missing section of gutter at left side of skirt roof, missing window panes; note also knee braces carried on masonry ancons; view to southwest, 90mm lens. - Southern Pacific Depot, 559 El Camino Real, San Carlos, San Mateo County, CA

High Hopes and Harsh Realities: The Real Challenges to Building a Diverse Workforce. Technical Appendix

ERIC Educational Resources Information Center

Putman, Hannah; Hansen, Michael; Walsh, Kate; Quintero, Diana

2016-01-01

Public schools are suffering from a well-publicized diversity problem. Minority students make up nearly half of all public school students, yet minority teachers comprise just 18 percent of the teacher workforce. In an effort to address what Slate has described as "the one cause in education everyone supports," school districts across…

High Hopes and Harsh Realities: The Real Challenges to Building a Diverse Workforce

ERIC Educational Resources Information Center

Putman, Hannah; Hansen, Michael; Walsh, Kate; Quintero, Diana

2016-01-01

Public schools are suffering from a well-publicized diversity problem. Minority students make up nearly half of all public school students, yet minority teachers comprise just 18 percent of the teacher workforce. In an effort to address what Slate has described as "the one cause in education everyone supports," school districts across…

Integrated Solar Array and Reflectarray Antenna for High Bandwidth Cubesats

NASA Technical Reports Server (NTRS)

Lewis, Dorothy; Martinez, Andres; Petro, Andrew

2015-01-01

The Integrated Solar Array and Reflectarray Antenna (ISARA) mission will demonstrate a reflectarray antenna that increases downlink data rates for Cube- Sats from the existing baseline rate of 9.6 kilobits per second (kbps) to more than 100 megabits per second (Mbps). The ISARA spacecraft is slated for launch no earlier than Dec. 1, 2015.

29 CFR 825.216 - Limitations on an employee's right to reinstatement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... slated for lay-off when the employee's original position is not would not meet the requirements of an equivalent position. (2) If a shift has been eliminated, or overtime has been decreased, an employee would..., if a position on, for example, a night shift has been filled by another employee, the employee is...

EISA Section 526: Impacts on DESC Supply

DTIC Science & Technology

2009-03-01

molecules, pro- ducing a slate of liquids and solids, including petrochemical products, which then are transported to markets. Refineries are...sands crude are estimated to have life-cycle emissions exceeding those from conventional oil and under some interpretations of section 526, might be...Supplying Refineries , 2003–2006.............................................. 3-2 Figure 3-2. U.S. Operating Refineries by PADD, 2006

The 20 and 30 GHz MMIC technology for future space communication antenna system

NASA Technical Reports Server (NTRS)

Anzic, G.; Connolly, D. J.

1984-01-01

The development of fully monolithic gallium arsenide receive and transmit modules is described. These modules are slated for phased array antenna applications in future 30/20 gigahertz communications satellite systems. Performance goals and various approaches to achieve them are discussed. The latest design and performance results of components, submodules and modules are presented.

The 20 and 30 GHz MMIC technology for future space communication antenna system

NASA Astrophysics Data System (ADS)

Anzic, G.; Connolly, D. J.

1984-10-01

The development of fully monolithic gallium arsenide receive and transmit modules is described. These modules are slated for phased array antenna applications in future 30/20 gigahertz communications satellite systems. Performance goals and various approaches to achieve them are discussed. The latest design and performance results of components, submodules and modules are presented.

Higher-Education Funds Are in Limbo as Congress Prepares to Head Home

ERIC Educational Resources Information Center

Field, Kelly

2008-01-01

This article reports that members of Congress were poised to leave Washington last week with some major higher-education accomplishments to campaign on and a slate of unfinished business important to colleges. Topping the higher-education to-do list for the next Congressional session is federal spending for the 2009 fiscal year, which began…

Information Types in Nonmimetic Documents: A Review of Biddle's Wipe-Clean Slate (Understanding Documents).

ERIC Educational Resources Information Center

Mosenthal, Peter B.; Kirsch, Irwin S.

1991-01-01

Describes how the 16 permanent lists used by a first grade reading teacher (and mother of 6) to manage the household represents the whole range of documents covered in the 3 major types of documents: matrix documents, graphic documents, and locative documents. Suggests class activities to clarify students' understanding of the information in…

NHEXAS PHASE I ARIZONA STUDY--STANDARD OPERATING PROCEDURE FOR BATCHING OF LAB DATA (UA-C-7.0)

EPA Science Inventory

The purpose of this SOP is to describe the steps involved in batching the physical laboratory data forms generated by NHEXAS Arizona and slated for data entry at the primary NHEXAS Arizona office. It applies to all physical laboratory data forms entered at this site. This proced...

Keep forage low to improve deer habitat

Treesearch

Robert M. Blair

1968-01-01

Depending on their age and how they are managed, southern pine plantations can provide sizable amounts of forage for deer. Since millions of acres of upland deer habitat are already in plantations, and millions more are slated for planting, the browse they yield will become increasingly important to southern deer herds--and to the sportsmen who are interested in seeing...

Gamed by the System: Adequate Yearly Progress as an Indicator of Persistently Low-Achieving School Performance

ERIC Educational Resources Information Center

Hochbein, Craig; Mitchell, Amanda M.; Pollio, Martin

2013-01-01

The recent policy focus on the turnaround of persistently low-achieving schools has generated considerable debate about the reforms needed to dramatically and quickly increase school performance. The purpose of this article is not to focus on specific turnaround interventions, but rather on the identification of schools slated to receive these…

The EDCA Finally Passed. Great! But What Does That Mean? | DoDLive

Science.gov Websites

-made or natural disaster. Last month, the State and Defense Departments announced the slate of five the existing military infrastructure, such as runways, at these five agreed locations. During his trip , Secretary Carter toured one of the five EDCA agreed locations - Antonio Bautista Air Base - and announced

76 FR 75887 - SEDASYS Computer-Assisted Personalized Sedation System; Ethicon Endo-Surgery, Incorporated's...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-05

... advisory committee was slated to discuss the Center for Devices and Radiological Health's (CDRH's) denial..., CDRH issued a letter to EES indicating that PMA P080009 for SEDASYS was not approvable under Sec. 814.44(f) (21 CFR 814.44(f)) because CDRH concluded that the data and information offered in support of...

African Virtual University: The Case of Kenyatta University, Kenya. Commonwealth Case Studies in Education.

ERIC Educational Resources Information Center

Juma, Magdallen N.

This booklet describes the African Virtual University (AVU), an interactive instructional telecommunications network established to provide distance education to the countries of sub-Saharan Africa. The AVU was piloted in 1997-1998, and in the 1998-1999 academic year, 27 institutions were slated to offer AVU courses. Supported by the World Bank,…

Implications of Increasing Light Tight Oil Production for U.S. Refining

EIA Publications

2015-01-01

EIA retained Turner, Mason & Company to provide analysis of the implications of increasing domestic light tight oil production for U.S. refining, focusing on regional crude supply/demand balances, refinery crude slates, operations, capital investment, product yields, crude oil exports/imports, petroleum product exports, infrastructure constraints and expansions, and crude oil price relationships.

Compilation of Abstracts of Theses Submitted by Candidates for Degrees

DTIC Science & Technology

1987-09-30

Paral- lel, Multiple Backend Database Systems Feudo, C.V. Modern Hardware Tochnololies 88 MAJ , USA 8nd. Sof ware Techniques for Online uatabase Storage...and itsApplication in the War- gaming , Reseamth and Analysis (W.A.R.) Lab Waltens erger, G.M. On Limited War, Escalation 524 CPT,, USRF Control, and...TECHNIQIUES FOR ONLINE DATABASE ,TORAGE AND ACCESS Christopher V. Feudo Ma or, United States Army B.S., United States Military Academy# 1972

Issues Affecting Internet Use in Afghanistan and Developing Countries in the Middle East

DTIC Science & Technology

2003-03-10

World Fashion Wares for Dot-Com Market ," Wall Street Journal, June 12, 2000, pp. B1, B12. Mansell, Robin, " Information and Communication Technologies ...Societies: Information Technology for Sustainable Development, New York: Oxford University Press, 1998. Marsh, Ann, "Mapping a Pan-African Market ...access to and use of information and communication technologies (ICT).[1] This paper examines some recent literature to identify the fundamental

An Empirical Approach to Analysis of Similarities between Software Failure Regions

DTIC Science & Technology

1991-09-01

cycle costs after the soft- ware has been marketed (Alberts, 1976). 1 Unfortunately, extensive software testing is frequently necessary in spite of...incidence is primarily syntactic. This mixing of semantic and syntactic forms in the same analysis could lead to some distortion, especially since the...of formulae to improve readability or to indicate precedence of operations. * All defintions within ’Condition I’ of a failure region are assumed to

Soft X-Ray Photoemission

DTIC Science & Technology

1977-07-01

Edward R, Hahn/MS-X22 Attn: Donald R. McMorrow/MS-G30 Attn: Samuel R. Crawford/MS-531 Ford Aerospace & Comm Operations Ford & Jamboree Roads...80933 Attn: Jerry I. Lubell Attn: Walter E. Ware Attn: John R. Hoffman Attn: Donald H. Bryce Attn: Albert P. Bridges Litton Systems, Inc...International Corp, P.O. Box 3105 Anaheim, CA 92803 Attn: George C. Messenger FB61 Attn: Donald J, Stevens FA70 Attn: K. F. Hull Attn: N. J

Evaluation of the Advanced Situational Awareness Training Pilot Program

DTIC Science & Technology

2017-02-01

M., Holder, L. D., Leibrecht, B. C ., Garland, D. J ., Wampler, R. L., & Matthews, M. D. (2000). Modeling and measuring situation awareness in the...Ware, L. J ., Ratcliff, J . J ., & Irvin, C . R. (2009). Evidence of the camera perspective bias in authentic videotaped interrogations: Implications...Advanced Situational Awareness Training Pilot Program 5a. CONTRACT OR GRANT NUMBER W5J9CQ-11- C -0040 5b. PROGRAM ELEMENT NUMBER 633007 6

21st Summer Farmers’ Market Boasts Quality Goods and Great People | Poster

Cancer.gov

NCI at Frederick’s 21st summer farmers’ market has officially begun, and this year’s vendors invite all employees to visit, browse their wares, and learn about the benefits of consuming all-natural products. The market is held every Tuesday until October 16 from 10:30 a.m. to 1:00 p.m. outside of Building 549—rain, shine, or, in the case of the most recent Tuesday, snow.

STARS Conceptual Framework for Reuse Processes (CFRP). Volume 2: application Version 1.0

DTIC Science & Technology

1993-09-30

Analysis and Design DISA/CIM process x OProcess [DIS93] Feature-Oriented Domain SEI process x Analysis ( FODA ) [KCH+90] JIAWG Object-Oriented Domain JIAWG...Domain Analysis ( FODA ) Feasibility Study. Technical Report CMU/S[1 ,N. I R 21. Soft- ware Engineering Institute, Carnegie Mellon University, Pittsburgh...Electronic Systems Center Air Force Materiel Command, USAF Hanscom AFB, MA 01731-5000 Prepared by: The Boeing Company , IBM, Unisys Corporation, Defense