Perception of slipperiness and prospective risk of slipping at work

PubMed Central

Courtney, Theodore K; Verma, Santosh K; Chang, Wen-Ruey; Huang, Yueng-Hsiang; Lombardi, David A; Brennan, Melanye J; Perry, Melissa J

2013-01-01

Objectives Falls are a leading cause of injury at work, and slipping is the predominant cause of falling. Prior research has suggested a modest correlation between objective measures (such as coefficient of friction, COF) and subjective measures of slipperiness (such as worker perceptions) in the workplace. However, the degree of association between subjective measures and the actual risk of slipping at the workplace is unknown. This study examined the association between perception of slipperiness and the risk of slipping. Methods 475 workers from 36 limited-service restaurants participated in a 12-week prospective cohort study. At baseline, demographic information was collected, participants rated floor slipperiness in eight areas of the restaurant, and work environment factors, such as COF, were measured. Restaurant-level and area-level mean perceptions of slipperiness were calculated. Participants then reported their slip experience at work on a weekly basis for the next 12 weeks. The associations between perception of slipperiness and the rate of slipping were assessed. Results Adjusting for age, gender, body mass index, education, primary language, mean COF, use of slip-resistant shoes, and restaurant chain, each 1-point increase in mean restaurant-level perception of slipperiness (4-point scale) was associated with a 2.71 times increase in the rate of slipping (95% CI 1.25 to 5.87). Results were similar for area-level perception within the restaurant (rate ratios (RR) 2.92, 95% CI 2.41 to 3.54). Conclusions Perceptions of slipperiness and the subsequent rate of slipping were strongly associated. These findings suggest that safety professionals, risk managers and employers could use aggregated worker perceptions of slipperiness to identify slipping hazards and, potentially, to assess intervention effectiveness. PMID:22935953

Perception of slipperiness and prospective risk of slipping at work.

PubMed

Courtney, Theodore K; Verma, Santosh K; Chang, Wen-Ruey; Huang, Yueng-Hsiang; Lombardi, David A; Brennan, Melanye J; Perry, Melissa J

2013-01-01

Falls are a leading cause of injury at work, and slipping is the predominant cause of falling. Prior research has suggested a modest correlation between objective measures (such as coefficient of friction, COF) and subjective measures of slipperiness (such as worker perceptions) in the workplace. However, the degree of association between subjective measures and the actual risk of slipping at the workplace is unknown. This study examined the association between perception of slipperiness and the risk of slipping. 475 workers from 36 limited-service restaurants participated in a 12-week prospective cohort study. At baseline, demographic information was collected, participants rated floor slipperiness in eight areas of the restaurant, and work environment factors, such as COF, were measured. Restaurant-level and area-level mean perceptions of slipperiness were calculated. Participants then reported their slip experience at work on a weekly basis for the next 12 weeks. The associations between perception of slipperiness and the rate of slipping were assessed. Adjusting for age, gender, body mass index, education, primary language, mean COF, use of slip-resistant shoes, and restaurant chain, each 1-point increase in mean restaurant-level perception of slipperiness (4-point scale) was associated with a 2.71 times increase in the rate of slipping (95% CI 1.25 to 5.87). Results were similar for area-level perception within the restaurant (rate ratios (RR) 2.92, 95% CI 2.41 to 3.54). Perceptions of slipperiness and the subsequent rate of slipping were strongly associated. These findings suggest that safety professionals, risk managers and employers could use aggregated worker perceptions of slipperiness to identify slipping hazards and, potentially, to assess intervention effectiveness.

Human gene therapy and slippery slope arguments.

PubMed Central

McGleenan, T

1995-01-01

Any suggestion of altering the genetic makeup of human beings through gene therapy is quite likely to provoke a response involving some reference to a 'slippery slope'. In this article the author examines the topography of two different types of slippery slope argument, the logical slippery slope and the rhetorical slippery slope argument. The logical form of the argument suggests that if we permit somatic cell gene therapy then we are committed to accepting germ line gene therapy in the future because there is no logically sustainable distinction between them. The rhetorical form posits that allowing somatic cell therapy now will be taking the first step on a slippery slope which will ultimately lead to the type of genocide perpetrated by the Nazis. The author tests the validity of these lines of argument against the facts of human gene therapy and concludes that because of their dependence on probabilities that cannot be empirically proven they should be largely disregarded in the much more important debate on moral line-drawing in gene therapy. PMID:8778459

Human gene therapy and slippery slope arguments.

PubMed

McGleenan, T

1995-12-01

Any suggestion of altering the genetic makeup of human beings through gene therapy is quite likely to provoke a response involving some reference to a 'slippery slope'. In this article the author examines the topography of two different types of slippery slope argument, the logical slippery slope and the rhetorical slippery slope argument. The logical form of the argument suggests that if we permit somatic cell gene therapy then we are committed to accepting germ line gene therapy in the future because there is no logically sustainable distinction between them. The rhetorical form posits that allowing somatic cell therapy now will be taking the first step on a slippery slope which will ultimately lead to the type of genocide perpetrated by the Nazis. The author tests the validity of these lines of argument against the facts of human gene therapy and concludes that because of their dependence on probabilities that cannot be empirically proven they should be largely disregarded in the much more important debate on moral line-drawing in gene therapy.

Assisted death and the slippery slope—finding clarity amid advocacy, convergence, and complexity

PubMed Central

Shariff, M.J.

2012-01-01

This paper unpacks the slippery slope argument as it pertains to assisted death. The assisted-death regimes of the Netherlands, Belgium, Luxembourg, Switzerland, and the states of Washington and Oregon are discussed and examined with respect to the slippery slope analytical rubric. In addition to providing a preliminary explanation of how the slippery slope argument has been academically defined and constructed, the paper examines assisted-death models from the perspective of considering what might exist at the top and at the bottom of the slippery slope. It also explores the nature and scope of safeguards implemented to avoid slippage, and shows that what lies at the top and bottom of the slippery slope may be different from jurisdiction to jurisdiction. After identifying some of the recent concerns that have arisen within each of the jurisdictions (concerns that might be viewed by some as evidence of slide), the paper concludes by making note of certain critical issues in the current assisted-death debate that merit deeper examination. PMID:22670093

Assisted death and the slippery slope-finding clarity amid advocacy, convergence, and complexity.

PubMed

Shariff, M J

2012-06-01

This paper unpacks the slippery slope argument as it pertains to assisted death.The assisted-death regimes of the Netherlands, Belgium, Luxembourg, Switzerland, and the states of Washington and Oregon are discussed and examined with respect to the slippery slope analytical rubric. In addition to providing a preliminary explanation of how the slippery slope argument has been academically defined and constructed, the paper examines assisted-death models from the perspective of considering what might exist at the top and at the bottom of the slippery slope. It also explores the nature and scope of safeguards implemented to avoid slippage, and shows that what lies at the top and bottom of the slippery slope may be different from jurisdiction to jurisdiction. After identifying some of the recent concerns that have arisen within each of the jurisdictions (concerns that might be viewed by some as evidence of slide), the paper concludes by making note of certain critical issues in the current assisted-death debate that merit deeper examination.

Factors influencing restaurant worker perception of floor slipperiness.

PubMed

Courtney, Theodore K; Huang, Yueng-Hsiang; Verma, Santosh K; Chang, Wen-Ruey; Li, Kai Way; Filiaggi, Alfred J

2006-11-01

Falls are responsible for a substantial injury burden in the global workplace. Restaurant environments are particularly challenged by slips, trips, and falls. This study explored those factors that could influence workers' self-reports of slipperiness in U.S. fast-food restaurants. One hundred and twenty-six workers employed in 10 fast-food restaurants in the northeastern United States participated in the study representing a study-wide response rate of 87.5%. Participants' ratings of floor slipperiness and occupational slip history within the past 4 weeks were collected through written questionnaire. Additional factors collected by questionnaire included age, gender, shift length, and shoe type. Shoe condition (wear) and shoe contamination were visually assessed by the investigators. Floor friction was also measured. Lower restaurant mean coefficient of friction and the presence of contamination on workers' shoe soles were environmental factors significantly associated with workers reporting more slippery conditions. A recent workplace history of slipping with or without a subsequent fall was also significantly associated with workers reporting more slippery conditions. Workers over the age of 45 reported conditions to be significantly less slippery than younger workers. The results suggest that worker ratings of slipperiness are influenced not only by the actual level of friction but also by the other individual and environmental factors noted above. Recommendations for future studies would include a longitudinal design to better capture the temporal sequence between these variables. More field research is needed to better understand the association between workplace conditions, worker perception of slipperiness, and slipping at work.

Some Problems in German to English Machine Translation

DTIC Science & Technology

1974-12-01

fron Benanti^e is a slippery business, especially when I have just clalwsd to subscribe to the idea that the structure of an utterance is intinately...from the English translation on page 15, the example paragraph can be divided Into elm 134 sections. These diviaions can be characterized at

The effects of inhomogeneous boundary dilution on the coating flow of an anti-HIV microbicide vehicle

NASA Astrophysics Data System (ADS)

Tasoglu, Savas; Peters, Jennifer J.; Park, Su Chan; Verguet, Stéphane; Katz, David F.; Szeri, Andrew J.

2011-09-01

A recent study in South Africa has confirmed, for the first time, that a vaginal gel formulation of the antiretroviral drug Tenofovir, when topically applied, significantly inhibits sexual HIV transmission to women [Karim et al., Science 329, 1168 (2010)]. However, the gel for this drug and anti-HIV microbicide gels in general have not been designed using an understanding of how gel spreading and retention in the vagina govern successful drug delivery. Elastohydrodynamic lubrication theory can be applied to model spreading of microbicide gels [Szeri et al., Phys. Fluids 20, 083101 (2008)]. This should incorporate the full rheological behavior of a gel, including how rheological properties change due to contact with, and dilution by, ambient vaginal fluids. Here, we extend our initial analysis, incorporating the effects of gel dilution due to contact with vaginal fluid produced at the gel-tissue interface. Our original model is supplemented with a convective-diffusive transport equation to characterize water transport into the gel and, thus, local gel dilution. The problem is solved using a multi-step scheme in a moving domain. The association between local dilution of gel and rheological properties is obtained experimentally, delineating the way constitutive parameters of a shear-thinning gel are modified by dilution. Results show that dilution accelerates the coating flow by creating a slippery region near the vaginal wall akin to a dilution boundary layer, especially if the boundary flux exceeds a certain value. On the other hand, if the diffusion coefficient of boundary fluid is increased, the slippery region diminishes in extent and the overall rate of gel spreading decreases.

The empirical slippery slope from voluntary to non-voluntary euthanasia.

PubMed

Lewis, Penney

2007-01-01

This article examines the evidence for the empirical argument that there is a slippery slope between the legalization of voluntary and non-voluntary euthanasia. The main source of evidence in relation to this argument comes from the Netherlands. The argument is only effective against legalization if it is legalization which causes the slippery slope. Moreover, it is only effective if it is used comparatively-to show that the slope is more slippery in jurisdictions which have legalized voluntary euthanasia than it is in jurisdictions which have not done so. Both of these elements are examined comparatively.

After the slippery slope: Dutch experiences on regulating active euthanasia.

PubMed

Boer, Theo A

2003-01-01

"When a country legalizes active euthanasia, it puts itself on a slippery slope from where it may well go further downward." If true, this is a forceful argument in the battle of those who try to prevent euthanasia from becoming legal. The force of any slippery slope argument, however, is by definition limited by its reference to future developments which cannot empirically be sustained. Experience in the Netherlands--where a law regulating active euthanasia was accepted in April 2001--may shed light on the strengths as well as the weaknesses of the slippery slope argument in the context of the euthanasia debate. This paper consists of three parts. First, it clarifies the Dutch legislation on euthanasia and explains the cultural context in which it originated. Second, it looks at the argument of the slippery slope. A logical and an empirical version are distinguished, and the latter, though philosophically less interesting, proves to be most relevant in the discussion on euthanasia. Thirdly, it addresses the question whether Dutch experiences in the process of legalizing euthanasia justify the fear of the slippery slope. The conclusion is that Dutch experiences justify some caution.

Bioinspired Surface Treatments for Improved Decontamination: Slippery Omniphobic Covalently Attached Liquid (SOCAL)

DTIC Science & Technology

2017-12-13

Omniphobic Covalently Attached Liquid (SOCAL) December 13, 2017 Approved for public release; distribution is unlimited. Brandy J. White Brian J. Melde...Bioinspired Surface Treatments for Improved Decontamination: Slippery Omniphobic Covalently Attached Liquid (SOCAL) Brandy J. White, Brian J. Melde, Anthony...decontamination capabilities for painted surfaces. This report details results for evaluation of a slippery omniphobic covalently attached liquid (SOCAL) and

Fabrication of super slippery sheet-layered and porous anodic aluminium oxide surfaces and its anticorrosion property

NASA Astrophysics Data System (ADS)

Song, Tingting; Liu, Qi; Liu, Jingyuan; Yang, Wanlu; Chen, Rongrong; Jing, Xiaoyan; Takahashi, Kazunobu; Wang, Jun

2015-11-01

Inspired by natural plants such as Nepenthes pitcher plants, super slippery surfaces have been developed to improve the attributes of repellent surfaces. In this report, super slippery porous anodic aluminium oxide (AAO) surfaces have fabricated by a simple and reproducible method. Firstly, the aluminium substrates were treated by an anodic process producing micro-nano structured sheet-layered pores, and then immersed in Methyl Silicone Oil, Fluororalkylsilane (FAS) and DuPont Krytox, respectively, generating super slippery surfaces. Such a good material with excellent anti-corrosion property through a simple and repeatable method may be potential candidates for metallic application in anti-corrosion and extreme environment.

Engineering Extreme Hydrophobic and Super Slippery Water Shedding Surfaces

NASA Astrophysics Data System (ADS)

McHale, Glen

2017-04-01

The intrinsic water repellency of a material is fundamentally determined by its surface chemistry, but alone this does not determine the ability of a surface to shed water. Physical factors such as the surface texture/topography, rigidity/flexibility, granularity/porosity combined with the intrinsic wetting properties of the liquid with the surface and whether it is infused by a lubricating liquid are equally important. In this talk I will outline fundamental, but simple, ideas on the topographic enhancement of surface chemistry to create superhydrophobicity, the adhesion of particles to liquid-air interfaces to create liquid marbles, elastocapillarity to create droplet wrapping, and lubricant impregnated surfaces to create completely mobile droplets [1-3]. I will discuss how these ideas have their origins in natural systems and surfaces, such as Lotus leaves, galling aphids and the Nepenthes pitcher plant. I will show how we have applied these concepts to study the wetting of granular systems, such as sand, to understand extreme soil water repellency. I will argue that relaxing the assumption that a solid substrate is fixed in shape and arrangement, can lead to the formation of liquid marbles, whereby a droplet self-coats in a hydrophobic powder/grains. I will show that the concepts of wetting and porosity blur as liquids penetrate into a porous or granular substrate. I will also discuss how lubricant impregnated super slippery surfaces can be used to study a pure constant contact angle mode of droplet evaporation [4]. Finally, I will show dewetting of a surface is not simply a video reversal of wetting [5], and I will give an example of the use of perfect hydrophobicity using the Leidenfrost effect to create a new type of low friction mechanical and hear engine [6]. References: [1] Shirtcliffe, N. J., et al., An introduction to superhydrophobicity. Advances in Colloid and Interface Science, vol. 161, pp.124-138 (2010). [2] McHale, G. & Newton, M. I. Liquid marbles: topical context within soft matter and recent progress. Soft Matter, vol. 11, pp. 2530-2546 (2015). [3] Geraldi, N. R., et al., Capillary origami and superhydrophobic membrane surfaces. Applied Physics Letters, vol. 102, art. 214104 (2013). [4] Guan, J. H. et al., Evaporation of sessile droplets on Slippery Liquid-Infused Porous Surfaces (SLIPS). Langmuir, vol. 31, pp. 11781-11789 (2015). [5] Edwards, A. M. J., et al., Not spreading in reverse: The dewetting of a liquid film into a single drop. Science Advances, vol. 2, art. e1600183-e1600183 (2016). [6] Wells, G. G., et al., A sublimation heat engine. Nature Communications, vol. 6, art. 6390 (2015). Acknowledgement: This work has been financially supported by the UK EPSRC and Reece Innovation Ltd, and developed in collaboration with co-workers at Northumbria, Nottingham Trent, Edinburgh, Swansea and Durham Universities.

Relationship among several measurements of slipperiness obtained in a laboratory environment.

PubMed

Chang, Wen-Ruey; Chang, Chien-Chi

2018-04-01

Multiple sensing mechanisms could be used in forming responses to avoid slips, but previous studies, correlating only two parameters, revealed a limited picture of this complex system. In this study, the participants walked as fast as possible without a slip under 15 conditions of different degrees of slipperiness. The relationships among various response parameters, including perceived slipperiness rating, utilized coefficient of friction (UCOF), slipmeter measurement and kinematic parameters, were evaluated. The results showed that the UCOF, perceived rating and heel angle had higher adjusted R 2 values as dependent variables in the multiple linear regressions with the remaining variables in the final pool as independent variables. Although each variable in the final data pool could reflect some measurement of slipperiness, these three variables are more inclusive than others in representing the other variables and were bigger predictors of other variables, so they could be better candidates for measurements of slipperiness. Copyright © 2017 Elsevier Ltd. All rights reserved.

Slippery Road Conditions and Fatal Motor Vehicle Crashes in the Northeastern United States, 1998–2002

PubMed Central

Marmor, Michael; Marmor, Nicholas E.

2006-01-01

Objectives. We investigated risk factors for fatal motor vehicle crashes on slippery roads in the Northeastern United States, 1998–2002. Methods. We analyzed data from the Fatality Analysis Reporting System of the National Highway Traffic Safety Administration. Results. Rates of crashes on slippery roads, and ratios of crashes on slippery roads to crashes on dry roads, were greatest among the youngest drivers. Among those aged 16 to 19 years, logistic regression analysis showed significant, independent risks associated with excessive speed for conditions (odds ratio [OR]=1.38), time of day (OR=1.80 for 5:00 to 9:00 am vs 10:00 am to 2:00 pm), time of year (OR=6.17 for January vs July), type of road (OR=1.27 for rural vs urban roads ), and age (OR=1.19 for those aged 16 to 17 years vs those aged 18 to 19 years). Licensure from states with graduated licensing programs was protective against crashes attributed to swerving on slippery roads (adjusted OR = 0.63). Risk factors among drivers older than 19 years were similar but peaked at different times of day and included increased risks for women compared with men. Conclusions. Driver training programs need to better address hazards presented by slippery roads. PMID:16507735

Lower Mississippi River Environmental Program. Report 2. A Physical Description of Main Stem Levee Borrow Pits along the Lower Mississippi River

DTIC Science & Technology

1988-02-01

Eastern cottonwood, green ash, sugarberry. box elder, bald cypress, willow honey locust, slippery elm , overcup oak and bitter pecan. Principle...vines and understory. Woody vegetation surrounds the borrow pit and consists of American and slippery elms , silver maple, black willow, cottonwood, pin...aquatica Water elm Ulmus rubra Slippery elm Urtica dioica Stinging nettle Vaccinium sp. Blueberry Vaccinium spp. Vaccinum Vernonia altissima Ironweed

The great slippery-slope argument.

PubMed

Burgess, J A

1993-09-01

Whenever some form of beneficent killing--for example, voluntary euthanasia--is advocated, the proposal is greeted with a flood of slippery-slope arguments warning of the dangers of a Nazi-style slide into genocide. This paper is an attempt systematically to evaluate arguments of this kind. Although there are slippery-slope arguments that are sound and convincing, typical formulations of the Nazi-invoking argument are found to be seriously deficient both in logical rigour and in the social history and psychology required as a scholarly underpinning. As an antidote, an attempt is made both to identify some of the likely causes of genocide and to isolate some of the more modest but legitimate fears that lie behind slippery-slope arguments of this kind.

The great slippery-slope argument.

PubMed Central

Burgess, J A

1993-01-01

Whenever some form of beneficent killing--for example, voluntary euthanasia--is advocated, the proposal is greeted with a flood of slippery-slope arguments warning of the dangers of a Nazi-style slide into genocide. This paper is an attempt systematically to evaluate arguments of this kind. Although there are slippery-slope arguments that are sound and convincing, typical formulations of the Nazi-invoking argument are found to be seriously deficient both in logical rigour and in the social history and psychology required as a scholarly underpinning. As an antidote, an attempt is made both to identify some of the likely causes of genocide and to isolate some of the more modest but legitimate fears that lie behind slippery-slope arguments of this kind. PMID:8230150

The Problem of Dirty Hands: The Moral Dilemma of Public Life.

DTIC Science & Technology

1981-04-21

ridden? Once this question is asked, a " slippery slope " seems to take effect in which the absoluteness of a *1 R.M. Hare, "Rules of " and Moral...but what of less clear dis- tinctions? Euthanasia , for instance, most often becomes an issue in cases where the choices seem to be between allowing a

29 CFR 1918.91 - Housekeeping.

Code of Federal Regulations, 2010 CFR

2010-07-01

... progress. (b) Slippery surfaces. The employer shall eliminate conditions causing slippery walking and... safe reach of employees. (e) Coaming clearance. Dunnage, hatch beams, tarpaulins or gear not in use...

Supramolecular polymers as surface coatings: rapid fabrication of healable superhydrophobic and slippery surfaces.

PubMed

Wei, Qiang; Schlaich, Christoph; Prévost, Sylvain; Schulz, Andrea; Böttcher, Christoph; Gradzielski, Michael; Qi, Zhenhui; Haag, Rainer; Schalley, Christoph A

2014-11-19

Supramolecular polymerization for non-wetting surface coatings is described. The self-assembly of low-molecular-weight gelators (LMWGs) with perfluorinated side chains can be utilized to rapidly construct superhydrophobic, as well as liquid-infused slippery surfaces within minutes. The lubricated slippery surface exhibits impressive repellency to biological li-quids, such as human serum and blood, and very fast self-healing. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Lower Mississippi River Environmental Program. Report 3. Bird and Mammal Use of Main Stem Levee Borrow Pits Along the Lower Mississippi River.

DTIC Science & Technology

1986-02-01

overcup oak, tupelo gum, Nuttall oak, American elm , slippery elm , i , hickories, persimmon, silver maple, deciduous holly, swamp privet, and rose mallows...cottonwood, green ash, sugarberry, box elder, deciduous holly, osage orange, swamp privet, hickories, overcup oak, water locust, honey locust, slippery elm ...wood, box elder, osage orange, hickories, honey locust, water locust, slippery elm , swamp privet, sugarberry, persimmon, and rose mallows. Where

Toward an experimental account of argumentation: the case of the slippery slope and the ad hominem arguments

PubMed Central

Lillo-Unglaube, Marco; Canales-Johnson, Andrés; Navarrete, Gorka; Bravo, Claudio Fuentes

2014-01-01

Argumentation is a crucial component of our lives. Although in the absence of rational debate our legal, political, and scientific systems would not be possible, there is still no integrated area of research on the psychology of argumentation. Furthermore, classical theories of argumentation are normative (i.e., the acceptability of an argument is determined by a set of norms or logical rules), which sometimes creates a dissociation between the theories and people’s behavior. We think the current challenge for psychology is to bring together the cognitive and normative accounts of argumentation. In this article, we exemplify this point by analyzing two cases of argumentative structures experimentally studied in the context of cognitive psychology. Specifically, we focus on the slippery slope argument and the ad hominem argument under the frameworks of Bayesian and pragma-dialectics approaches, respectively. We think employing more descriptive and experimental accounts of argumentation would help Psychology to bring closer the cognitive and normative accounts of argumentation with the final goal of establishing an integrated area of research on the psychology of argumentation. PMID:25566112

Toward an experimental account of argumentation: the case of the slippery slope and the ad hominem arguments.

PubMed

Lillo-Unglaube, Marco; Canales-Johnson, Andrés; Navarrete, Gorka; Bravo, Claudio Fuentes

2014-01-01

Argumentation is a crucial component of our lives. Although in the absence of rational debate our legal, political, and scientific systems would not be possible, there is still no integrated area of research on the psychology of argumentation. Furthermore, classical theories of argumentation are normative (i.e., the acceptability of an argument is determined by a set of norms or logical rules), which sometimes creates a dissociation between the theories and people's behavior. We think the current challenge for psychology is to bring together the cognitive and normative accounts of argumentation. In this article, we exemplify this point by analyzing two cases of argumentative structures experimentally studied in the context of cognitive psychology. Specifically, we focus on the slippery slope argument and the ad hominem argument under the frameworks of Bayesian and pragma-dialectics approaches, respectively. We think employing more descriptive and experimental accounts of argumentation would help Psychology to bring closer the cognitive and normative accounts of argumentation with the final goal of establishing an integrated area of research on the psychology of argumentation.

Passive Anti-Icing and Active Deicing Films.

PubMed

Wang, Tuo; Zheng, Yonghao; Raji, Abdul-Rahman O; Li, Yilun; Sikkema, William K A; Tour, James M

2016-06-08

Anti-icing and deicing are the two major pathways for suppressing adhesion of ice on surfaces, yet materials with dual capabilities are rare. In this work, we have designed a perfluorododecylated graphene nanoribbon (FDO-GNR) film that takes advantage of both the low polarizability of perfluorinated carbons and the intrinsic conductive nature of graphene nanoribbons. The FDO-GNR films are superhydrophobic with a sheet resistance below 8 kΩ·sq(-1) and then exhibit an anti-icing property that prevents freezing of incoming ice-cold water down to -14 °C. After that point, voltage can be applied to the films to resistively heat and deice the surface. Further a lubricating liquid can be employed to create a slippery surface to improve the film's deicing performance. The FDO-GNR films can be easily switched between the superhydrophobic anti-icing mode and the slippery deicing mode by applying the lubricant. A spray-coating method makes it suitable for large-scale applications. The anti-icing and deicing properties render the FDO-GNR films with promise for use in extreme environments.

Consequentialism and the slippery slope: a response to Clark.

PubMed

Hughes, J

2000-01-01

Michael Clark has recently argued that the slippery slope argument against voluntary euthanasia is 'entirely consequentialist' and that its use to justify continued prohibition of voluntary euthanasia involves a failure to treat patients who request assistance in ending their lives as ends in themselves. This article argues that in fact the slippery slope is consistent with most forms of deontology, and that it need not involve any violation of the principle that people should be treated as ends, depending upon how that principle is construed. It is concluded that supporters of voluntary euthanasia cannot dismiss the slippery slope argument on the basis of deontological principles but must take seriously the consequences that it postulates and engage in factual argument about their likely extent and about the likely effectiveness of any proposed safeguards.

Fabrication of Slippery Lubricant-Infused Porous Surface with High Underwater Transparency for the Control of Marine Biofouling.

PubMed

Wang, Peng; Zhang, Dun; Sun, Shimei; Li, Tianping; Sun, Yan

2017-01-11

Marine optical instruments are bearing serious biofouling problem, which affects the accuracy of data collected. To solve the biofouling problem of marine optical instruments, a novel instance of slippery lubricant-infused porous surface (SLIPS) with high underwater-transparency was designed over glass substrate via infusing lubricant into its porous microstructure fabricated with hydrothermal method. The advantage of SLIPS as antibiofouling strategy to marine optical instruments was proven by comparing its underwater optical and antibiofouling performances with three kinds of samples (hydrophilic glass sample, textured hydrophilic glass sample, and superhydrophobic glass sample). The modification of SLIPS enhances the underwater-transparency of glass sample within the wavelength of 500-800 nm, for the infusion of lubricant with lower refractive index than glass substrate. In contrast with hydrophilic surface, textured hydrophilic surface and superhydrophobic surface, SLIPS can significantly inhibit bacterial and algal settlements, thereby maintaining high underwater-transparency in both dynamic and static seawater. The inhibition of bacterial and algal settlements over SLIPS results from its liquid-like property. The contact angle hysteresis of water over SLIPS increases with immersion time in seawater under different conditions (static, dynamic, and vibration conditions). Both dynamic and vibration conditions accelerate the failure of SLIPS exposed in seawater. This research provides valuable information for solving biofouling problem of marine optical instruments with SLIPS.

A Study of Vegetation Development in Relation to Age of River Stabilization Structures Along a Channelized Segment of the Missouri River.

DTIC Science & Technology

1975-01-25

s.ame time period, the first shrub species begin to appear in the sites. Ulmus rubra ( slippery elm ), Celtis occidentalis (hackberry), and Platanus...boxelder), Ulmus americana (American elm ), Ulmus rubra ( slippery elm ), Fra:inus pennsyl- vanica (green ash), and Juglans nigra (black walnut). These may...be replaced by Tilia americana (basswood), the Ulmus americana (American elm ) and Ulmus rubra ( slippery elm ) remaining as co- dominants. Weaver (1960

Keeping Kids in School: A Slippery Slope for Miskitu Families Living in the Pearl Lagoon Basin of Nicaragua

ERIC Educational Resources Information Center

Conway, Patricia Ann

2015-01-01

In 2014, Miskitu participants in the communities of Raitipura and Kahkabila and several of their children had dropped out of school. Earlier quantitative research revealed a problem of low matriculation in elementary and high schools in all of Nicaragua. This inquiry differed from others in that it was a qualitative study focusing on one group of…

Human-centred approaches in slipperiness measurement

PubMed Central

Grönqvist, Raoul; Abeysekera, John; Gard, Gunvor; Hsiang, Simon M.; Leamon, Tom B.; Newman, Dava J.; Gielo-Perczak, Krystyna; Lockhart, Thurmon E.; Pai, Clive Y.-C.

2010-01-01

A number of human-centred methodologies—subjective, objective, and combined—are used for slipperiness measurement. They comprise a variety of approaches from biomechanically-oriented experiments to psychophysical tests and subjective evaluations. The objective of this paper is to review some of the research done in the field, including such topics as awareness and perception of slipperiness, postural and balance control, rating scales for balance, adaptation to slippery conditions, measurement of unexpected movements, kinematics of slipping, and protective movements during falling. The role of human factors in slips and falls will be discussed. Strengths and weaknesses of human-centred approaches in relation to mechanical slip test methodologies are considered. Current friction-based criteria and thresholds for walking without slipping are reviewed for a number of work tasks. These include activities such as walking on a level or an inclined surface, running, stopping and jumping, as well as stair ascent and descent, manual exertion (pushing and pulling, load carrying, lifting) and particular concerns of the elderly and mobility disabled persons. Some future directions for slipperiness measurement and research in the field of slips and falls are outlined. Human-centred approaches for slipperiness measurement do have many applications. First, they are utilized to develop research hypotheses and models to predict workplace risks caused by slipping. Second, they are important alternatives to apparatus-based friction measurements and are used to validate such methodologies. Third, they are used as practical tools for evaluating and monitoring slip resistance properties of foot wear, anti-skid devices and floor surfaces. PMID:11794763

Consequentialism, complacency, and slippery slope arguments.

PubMed

Oakley, Justin; Cocking, Dean

2005-01-01

The standard problem with many slippery slope arguments is that they fail to provide us with the necessary evidence to warrant our believing that the significantly morally worse circumstances they predict will in fact come about. As such these arguments have widely been criticised as 'scare-mongering'. Consequentialists have traditionally been at the forefront of such criticisms, demanding that we get serious about guiding our prescriptions for right action by a comprehensive appreciation of the empirical facts. This is not surprising, since consequentialism has traditionally been committed to the idea that right action be driven by empirical realities, and this hard-headed approach has been an especially notable feature of Australian consequentialism. But this apparent empirical hard-headedness is very selective. While consequentialists have understood their moral outlook and commitments as guided by a partnership with empirical science - most explicitly in their replies to the arguments of their detractors - some consequentialists have been remarkably complacent about providing empirical support for their own prescriptions. Our key example here is the consequentialist claim that our current practises of partiality in fact maximise the good, impartially conceived. This claim has invariably been made without compelling support for the large empirical claims upon which it rests, and so, like the speculative empirical hand-waving of weak slippery slope arguments, it seems similarly to be undermined. While these arguments have presented us with 'wishful thinking' rather than 'scare-mongering', we argue in this paper that their complacency in meeting the relevant empirical justificatory burden remains much the same.

Hydrophilic directional slippery rough surfaces for water harvesting

PubMed Central

Sun, Nan; Nielsen, Steven O.; Wang, Jing

2018-01-01

Multifunctional surfaces that are favorable for both droplet nucleation and removal are highly desirable for water harvesting applications but are rare. Inspired by the unique functions of pitcher plants and rice leaves, we present a hydrophilic directional slippery rough surface (SRS) that is capable of rapidly nucleating and removing water droplets. Our surfaces consist of nanotextured directional microgrooves in which the nanotextures alone are infused with hydrophilic liquid lubricant. We have shown through molecular dynamics simulations that the physical origin of the efficient droplet nucleation is attributed to the hydrophilic surface functional groups, whereas the rapid droplet removal is due to the significantly reduced droplet pinning of the directional surface structures and slippery interface. We have further demonstrated that the SRS, owing to its large surface area, hydrophilic slippery interface, and directional liquid repellency, outperforms conventional liquid-repellent surfaces in water harvesting applications. PMID:29670942

The slippery slope: how small ethical transgressions pave the way for larger future transgressions.

PubMed

Welsh, David T; Ordóñez, Lisa D; Snyder, Deirdre G; Christian, Michael S

2015-01-01

Many recent corporate scandals have been described as resulting from a slippery slope in which a series of small infractions gradually increased over time (e.g., McLean & Elkind, 2003). However, behavioral ethics research has rarely considered how unethical behavior unfolds over time. In this study, we draw on theories of self-regulation to examine whether individuals engage in a slippery slope of increasingly unethical behavior. First, we extend Bandura's (1991, 1999) social-cognitive theory by demonstrating how the mechanism of moral disengagement can reduce ethicality over a series of gradually increasing indiscretions. Second, we draw from recent research connecting regulatory focus theory and behavioral ethics (Gino & Margolis, 2011) to demonstrate that inducing a prevention focus moderates this mediated relationship by reducing one's propensity to slide down the slippery slope. We find support for the developed model across 4 multiround studies. (c) 2015 APA, all rights reserved.

Procreative liberty: the case for preconception sex selection.

PubMed

Dahl, Edgar

2003-01-01

Preconception sex selection for non-medical reasons raises serious moral, legal and social issues. The main concerns include the threat of a sex ratio distortion due to a common preference for boys over girls, the charge of sexism, the danger of reinforcing gender stereotypical behaviour in sex selected children, and the fear of a slippery slope towards creating designer babies. This paper endeavours to show that none of the objections to preconception sex selection is conclusive and that there is no justification for denying parents the right to choose the sex of their prospective children.

Slippery Rock University

ERIC Educational Resources Information Center

Arnhold, Robert W.

2008-01-01

Slippery Rock University (SRU), located in western Pennsylvania, is one of 14 state-owned institutions of higher education in Pennsylvania. The university has a rich tradition of providing professional preparation programs in special education, therapeutic recreation, physical education, and physical therapy for individuals with disabilities.…

Mechanical stability, corrosion resistance of superhydrophobic steel and repairable durability of its slippery surface.

PubMed

Gao, Xiaoyu; Guo, Zhiguang

2018-02-15

A simple way of chemical etching with H 2 SO 4 and H 2 O 2 was employed to prepare a superhydrophobic steel surface with a water contact angle of 163.5° and a sliding angle of about 0°, in addition to modification with 1H,1H,2H,2H-perfluoroalkyltriethoxysilane (FAS-13). On the basis of perfluropolyethers (PFPE) infusion, a slippery liquid-infused porous surface (SLIPS) was fabricated that had a water contact angle of 115.6° and a sliding angle of 2.27°. The prepared sample can still maintain superhydrophobicity after moving 100 cm on 1000 # sandpaper under 100 g loading via an abrasion test, while its corrosion resistance was exhibited via more positive corrosion potentials (E corr ) and lower corrosion current densities (I corr ) in electrochemical corrosion tests with various solutions. Even if superhydrophobic and slippery properties were lost in the process of long-time soaking in salt solution, the superhydrophobic steel could regain its ability and slippery surfaces also exhibited the repairable durability through retreatment. Such stable, corrosion resistant and superhydrophobic bearing steel and repairable slippery surface have potential for application in practical production and life. Copyright © 2017 Elsevier Inc. All rights reserved.

Influence of Slippery Pacemaker Leads on Lead-Induced Venous Occlusion

NASA Astrophysics Data System (ADS)

Yang, Weiguang; Bhatia, Sagar; Obenauf, Dayna; Resse, Max; Esmaily-Moghadam, Mahdi; Feinstein, Jeffrey; Pak, On Shun

2016-11-01

The use of medical devices such as pacemakers and implantable cardiac defibrillators have become commonplace to treat arrhythmias. Pacing leads with electrodes are used to send electrical pulses to the heart to treat either abnormally slow heart rates, or abnormal rhythms. Lead induced vessel occlusion, which is commonly seen after placement of pacemaker or ICD leads, may result in lead malfunction and/or SVC syndrome, and makes lead extraction difficult. The association between the anatomic locations at risk for thrombosis and regions of venous stasis have been reported previously. The computational studies reveal obvious flow stasis in the proximity of the leads, due to the no-slip boundary condition imposed on the lead surface. With the advent of recent technologies capable of creating slippery surfaces that can repel complex fluids including blood, we explore computationally how local flow structures may be altered in the regions around the leads when the no-slip boundary condition on the lead surface is relaxed using various slip lengths. The findings evaluate the possibility of mitigating risks of lead-induced thrombosis and occlusion by implementing novel surface conditions (i.e. theoretical coatings) on the leads.

Anesthesia or Immobilization of Domestic and Miniature Swine - Methods and Some Problems.

DTIC Science & Technology

1972-12-01

critical observation and moderate long-term survival before euthanasia and necropsy. Premedication and a gaseous anesthesia administered through a...Figure 1) were located outside and consistPd of 24 runs (12 runs per side) with sloped concrete floors and four-inch concrete dividers topped with...Jelly®) or sprayed with a slippery topical anesthetic (Cetacaine®). A plastic rod-type stiffener was inserted into the tube, and two persons were

Relationships between nocturnal winter road slipperiness, cloud cover and surface temperature

NASA Astrophysics Data System (ADS)

Grimbacher, T.; Schmid, W.

2003-04-01

Ice and Snow are important risks for road traffic. In this study we show several events of slipperiness in Switzerland, mainly caused by rain or snow falling on a frozen surface. Other reasons for slippery conditions are frost or freezing dew in clear nights and nocturnal clearing after precipitation, which goes along with radiative cooling. The main parameters of road weather forecasts are precipitation, cloudiness and surface temperature. Precipitation is well predictable with weather radars and radar nowcasting algorithms. Temperatures are often taken from numerical weather prediction models, but because of changes in cloud cover these model values are inaccurate in terms of predicting the onset of freezing. Cloudiness, especially the advection, formation and dissipation of clouds and their interaction with surface temperatures, is one of the major unsolved problems of road weather forecasts. Cloud cover and the temperature difference between air and surface temperature are important parameters of the radiation balance. In this contribution, we show the relationship between them, proved at several stations all over Switzerland. We found a quadratic correlation coefficient of typically 60% and improved it considering other meteorological parameters like wind speed and surface water. The acquired relationship may vary from one station to another, but we conclude that temperature difference is a signature for nocturnal cloudiness. We investigated nocturnal cloudiness for two cases from winters 2002 and 2003 in the canton of Lucerne in central Switzerland. There, an ultra-dense combination of two networks with together 55 stations within 50x50 km^2 is operated, measuring air and surface temperature, wind and other road weather parameters. With the aid of our equations, temperature differences detected from this network were converted into cloud maps. A comparison between precipitation seen by radar, cloud maps and surface temperatures shows that there are similar structures in all data. Depending on the situation, we also identified additional effects influencing the temperature differences, for instance the advection of could air or the influence of melting heat at or after a snow event. All these findings help to further understand the phenomena, and hence will contribute to a better predictability of winter road slipperiness.

On-Going Research at Slippery Rock University.

ERIC Educational Resources Information Center

Chase, Craig

1985-01-01

Summarizes eight research studies in the field of outdoor/environmental education being completed at Slippery Rock University in 1985. Topics include isolation among National Park Service rangers, school participation in recycling programs, the use of trees to modify microclimates in West African urban centers, and evaluation of environmental…

Gait Characteristics When Walking on Different Slippery Walkways.

PubMed

Whitmore, Mariah W; Hargrove, Levi J; Perreault, Eric J

2016-01-01

This study sought to determine the changes in muscle activity about the ankle, knee, and hip in able-bodied people walking at steady state on surfaces with different degrees of slipperiness. Muscle activity was measured through electromyographic signals from selected lower limb muscles and quantified to directly compare changes across surface conditions. Our results showed distinct changes in the patterns of muscle activity controlling each joint. Muscles controlling the ankle showed a significant reduction in activity as the surface became more slippery, presumably resulting in a compliant distal joint to facilitate full contact with the surface. Select muscles about the knee and hip showed a significant increase in activity as the surface became more slippery. This resulted in increased knee and hip flexion likely contributing to a lowering of the body's center of mass and stabilization of the proximal leg and trunk. These findings suggest a proximal-distal gradient in the control of muscle activity that could inform the future design of adaptable prosthetic controllers. Walking on a slippery surface is extremely difficult, especially for individuals with lower limb amputations because current prostheses do not allow the compensatory changes in lower limb dynamics that occur involuntarily in unimpaired subjects. With recent advances in prosthetic control, there is the potential to provide some of these compensatory changes; however, we first need to understand how able-bodied individuals modulate their gait under these challenging conditions.

The Psychological Mechanism of the Slippery Slope Argument

ERIC Educational Resources Information Center

Corner, Adam; Hahn, Ulrike; Oaksford, Mike

2011-01-01

Slippery slope arguments (SSAs) have a bad philosophical reputation. They seem, however, to be widely used and frequently accepted in many legal, political, and ethical contexts. Hahn and Oaksford (2007) argued that distinguishing strong and weak SSAs may have a rational basis in Bayesian decision theory. In this paper three experiments…

Slippery liquid-infused porous surface bio-inspired by pitcher plant for marine anti-biofouling application.

PubMed

Wang, Peng; Zhang, Dun; Lu, Zhou

2015-12-01

Marine biofouling, caused by the adhesion of microorganism, is a worldwide problem in marine systems. In this research work, slippery liquid-infused porous surface (SLIPS), inspired by Nepenthes pitcher plant, was constructed over aluminum for marine anti-biofouling application. The as-fabricated SLIPS was characterized with SEM, AFM, and contact angle meter. Its anti-biofouling performance was evaluated with settlement experiment of a typical marine biofouling organism Chlorella vulgaris in both static and dynamic conditions. The effect of solid substrate micro-structure on anti-biofouling property of SLIPS was studied. It was suggested that the micro-structure with low length scale and high degree of regularity should be considered for designing stable SLIPS with exceptional anti-biofouling property. The liquid-like property is proven to be the main contributor for the exceptional anti-biofouling performance of SLIPS in both static and dynamic conditions. The low roughness, which facilitates removing the settled C. vulgaris under shear force, is also a main contributor for the anti-biofouling performance of SLIPS in dynamic condition. Copyright © 2015 Elsevier B.V. All rights reserved.

Chasing Success: Air Force Efforts to Reduce Civilian Harm

DTIC Science & Technology

2016-03-01

law that is not properly part of the LOAC.35 Military lawyers have what might be called a “conservative” or “ minimalist ” view of the LOAC.36 While...practical or political matter, such nuance is infeasible. Even starting down that route might prove a slippery slope, compromising the law’s bedrock...on civilian harm] with the [Harvard] Carr Center dialogue; so, I started seeing the problem through that lens. I thought we could fix some things

Aircraft performance in slippery runway conditions : a simulation study of the accuracy and limitations of real-time runway friction estimation based on airplane onboard data.

DOT National Transportation Integrated Search

2015-04-01

Runway overrun accidents occurring during landings in slippery conditions continue to occur frequently worldwide. After a : number of specific landing overrun accidents in the U.S., the National Transportation Safety Board (NTSB) issued a safety : re...

75 FR 69125 - Notice of Lodging of Consent Decree Under The Clean Air Act

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-10

... the Decree, the United States alleges that the Slippery Rock University and the Commonwealth of... particulate emissions from boilers on the university campus. Pursuant to the Decree, Slippery Rock University... also be obtained by mail from the Consent Decree Library, P.O. Box 7611, U.S. Department of Justice...

Condensation on Slippery Asymmetric Bumps

NASA Astrophysics Data System (ADS)

Park, Kyoo-Chul; Kim, Philseok; Aizenberg, Joanna

Controlling dropwise condensation by designing surfaces that enable droplets to grow rapidly and be shed as quickly as possible is fundamental to water harvesting systems, thermal power generation, distillation towers, etc. However, cutting-edge approaches based on micro/nanoscale textures suffer from intrinsic trade-offs that make it difficult to optimize both growth and transport at once. Here we present a conceptually different design approach based on principles derived from Namib desert beetles, cacti, and pitcher plants that synergistically couples both aspects of condensation and outperforms other synthetic surfaces. Inspired by an unconventional interpretation of the role of the beetle's bump geometry in promoting condensation, we show how to maximize vapor diffusion flux at the apex of convex millimetric bumps by optimizing curvature and shape. Integrating this apex geometry with a widening slope analogous to cactus spines couples rapid drop growth with fast directional transport, by creating a free energy profile that drives the drop down the slope. This coupling is further enhanced by a slippery, pitcher plant-inspired coating that facilitates feedback between coalescence-driven growth and capillary-driven motion. We further observe an unprecedented six-fold higher exponent in growth rate and much faster shedding time compared to other surfaces. We envision that our fundamental understanding and rational design strategy can be applied to a wide range of phase change applications.

Condensation on Slippery Asymmetric Bumps

NASA Astrophysics Data System (ADS)

Park, Kyoo-Chul; Kim, Philseok; Aizenberg, Joanna

2016-11-01

Controlling dropwise condensation by designing surfaces that enable droplets to grow rapidly and be shed as quickly as possible is fundamental to water harvesting systems, thermal power generation, distillation towers, etc. However, cutting-edge approaches based on micro/nanoscale textures suffer from intrinsic trade-offs that make it difficult to optimize both growth and transport at once. Here we present a conceptually different design approach based on principles derived from Namib desert beetles, cacti, and pitcher plants that synergistically couples both aspects of condensation and outperforms other synthetic surfaces. Inspired by an unconventional interpretation of the role of the beetle's bump geometry in promoting condensation, we show how to maximize vapor diffusion flux at the apex of convex millimetric bumps by optimizing curvature and shape. Integrating this apex geometry with a widening slope analogous to cactus spines couples rapid drop growth with fast directional transport, by creating a free energy profile that drives the drop down the slope. This coupling is further enhanced by a slippery, pitcher plant-inspired coating that facilitates feedback between coalescence-driven growth and capillary-driven motion. We further observe an unprecedented six-fold higher exponent in growth rate and much faster shedding time compared to other surfaces. We envision that our fundamental understanding and rational design strategy can be applied to a wide range of phase change applications.

Designing robust alumina nanowires-on-nanopores structures: superhydrophobic surfaces with slippery or sticky water adhesion.

PubMed

Peng, Shan; Tian, Dong; Miao, Xinrui; Yang, Xiaojun; Deng, Wenli

2013-11-01

Hierarchical alumina surfaces with different morphologies were fabricated by a simple one-step anodization method. These alumina films were fabricated by a new raw material: silica gel plate (aluminum foil with a low purity of 97.17%). The modulation of anodizing time enabled the formation of nanowires-on-nanopores hybrid nanostructures having controllable nanowires topographies through a self-assembly process. The resultant structures were demonstrated to be able to achieve superhydrophobicity without any hydrophobic coating layer. More interestingly, it is found that the as-prepared superhydrophobic alumina surfaces exhibited high contrast water adhesion. Hierarchical alumina film with nanowire bunches-on-nanopores (WBOP) morphology presents extremely slippery property which can obtain a sliding angle (SA) as low as 1°, nanowire pyramids-on-nanopores (WPOP) structure shows strongly sticky water adhesion with the adhesive ability to support 15 μL inverted water droplet at most. The obtained superhydrophobic alumina surfaces show remarkable mechanical durability even treated by crimping or pressing without impact on the water-repellent performance. Moreover, the created surfaces also show excellent resistivity to ice water, boiling water, high temperature, organic solvent and oil contamination, which could expand their usefulness and efficacy in harsh conditions. Copyright © 2013 Elsevier Inc. All rights reserved.

Inhibition of ice nucleation by slippery liquid-infused porous surfaces (SLIPS).

PubMed

Wilson, Peter W; Lu, Weizhe; Xu, Haojun; Kim, Philseok; Kreder, Michael J; Alvarenga, Jack; Aizenberg, Joanna

2013-01-14

Ice repellent coatings have been studied and keenly sought after for many years, where any advances in the durability of such coatings will result in huge energy savings across many fields. Progress in creating anti-ice and anti-frost surfaces has been particularly rapid since the discovery and development of slippery, liquid infused porous surfaces (SLIPS). Here we use SLIPS-coated differential scanning calorimeter (DSC) pans to investigate the effects of the surface modification on the nucleation of supercooled water. This investigation is inherently different from previous studies which looked at the adhesion of ice to SLIPS surfaces, or the formation of ice under high humidity conditions. Given the stochastic nature of nucleation of ice from supercooled water, multiple runs on the same sample are needed to determine if a given surface coating has a real and statistically significant effect on the nucleation temperature. We have cycled supercooling to freezing and then thawing of deionized water in hydrophilic (untreated aluminum), hydrophobic, superhydrophobic, and SLIPS-treated DSC pans multiple times to determine the effects of surface treatment on the nucleation and subsequent growth of ice. We find that SLIPS coatings lower the nucleation temperature of supercooled water in contact with statistical significance and show no deterioration or change in the coating performance even after 150 freeze-thaw cycles.

Applying APPA Guidelines for Custodial Staffing: The Case of Slippery Rock University

ERIC Educational Resources Information Center

Iossifova, Albena; Hemphill, Dennis; Brest, Diana; Albert, Scott

2009-01-01

Founded in 1889, Slippery Rock University (SRU) is a state university with 8,500 students and 400 faculty. Facilities and planning (F&P) employs 178 staff, of which 50 are custodians. F&P is responsible for the maintenance of 560 acres and 60 major buildings that comprise approximately 2.3 million gross square feet. Currently work is…

Touch influences perceived gloss

PubMed Central

Adams, Wendy J.; Kerrigan, Iona S.; Graf, Erich W.

2016-01-01

Identifying an object’s material properties supports recognition and action planning: we grasp objects according to how heavy, hard or slippery we expect them to be. Visual cues to material qualities such as gloss have recently received attention, but how they interact with haptic (touch) information has been largely overlooked. Here, we show that touch modulates gloss perception: objects that feel slippery are perceived as glossier (more shiny).Participants explored virtual objects that varied in look and feel. A discrimination paradigm (Experiment 1) revealed that observers integrate visual gloss with haptic information. Observers could easily detect an increase in glossiness when it was paired with a decrease in friction. In contrast, increased glossiness coupled with decreased slipperiness produced a small perceptual change: the visual and haptic changes counteracted each other. Subjective ratings (Experiment 2) reflected a similar interaction – slippery objects were rated as glossier and vice versa. The sensory system treats visual gloss and haptic friction as correlated cues to surface material. Although friction is not a perfect predictor of gloss, the visual system appears to know and use a probabilistic relationship between these variables to bias perception – a sensible strategy given the ambiguity of visual clues to gloss. PMID:26915492

Optical phenomena and antifrosting property on biomimetics slippery fluid-infused antireflective films via layer-by-layer comparison with superhydrophobic and antireflective films.

PubMed

Manabe, Kengo; Nishizawa, Shingo; Kyung, Kyu-Hong; Shiratori, Seimei

2014-08-27

Sophisticated material interfaces generated by natural life forms such as lotus leaves and Nepenthes pitcher plants have exceptional abilities to resolve challenges in wide areas of industry and medicine. The nano- and microstructures inspired by these natural materials can repel various liquids and form self-cleaning coatings. In particular, slippery liquid-infused surfaces are receiving remarkable interest as transparent, nonfouling, and antifrosting synthetic surfaces for solar cells and optical devices. Here we focus on the transparency of lubricant-infused texture on antireflective films fabricated by layer-by-layer self-assembly that decrease light scattering, which is important to maintain device properties. A slippery fluid-infused antireflective film composed of chitin nanofibers less than 50 nm in diameter prevented light scattering at the long-wavelength side by Rayleigh scattering to achieve 97.2% transmittance. Moreover, films composed of the same materials demonstrated three different morphologies: superhydrophilicity with antireflection, superhydrophobicity, and omniphobicity, mimicking the biological structures of moth eyes, lotus leaves, and pitcher plants, respectively. The effect of thermal changes on the ability of each film to prevent frost formation was investigated. The slippery fluid-infused antireflective film showed effective antifrosting behavior.

Euthanasia from the perspective of hospice care.

PubMed

Gillett, G

1994-01-01

The hospice believes in the concept of a gentle and harmonious death. In most hospice settings there is also a rejection of active euthanasia. This set of two apparently conflicting principles can be defended on the basis of two arguments. The first is that doctors should not foster the intent to kill as part of their moral and clinical character. This allows proper sensitivity to the complex and difficult situation that arises in many of the most difficult terminal care situations. The second argument turns on the seduction of technological solutions to human problems and the slippery slope that may arise in the presence of a quick and convenient way of dealing with problems of death and dying.

Proper care for the dying: a critical public issue.

PubMed Central

Crispell, K R; Gomez, C F

1987-01-01

The ability of the medical profession to sustain life, or more appropriately, to prolong dying, in patients with terminal illness, creates a most complex and controversial situation for all involved: the patient, if mentally alert; the patient's family; and the medical care team including physicians, nurses and attendants. This situation is especially complex in large acute care hospitals where medical and nursing students, residents and house officers receive advanced medical training. A major problem, prolonging the dying of the terminally ill, with its medical, legal, ethical and economic complexities now confronts American society. The problem is particularly acute in teaching hospitals, in which one finds a disproportionate number of terminally ill patients. The ability to work at these questions as a community rather than as adversaries will determine much about the ability of the health care system to respect the dignity and autonomy of those who seek aid and comfort when faced with serious illness and impending death. Better communication between the physicians, health care providers, the lawyers and ethicists must be developed in order to solve these problems. Over the next ten years society and our elected representatives will be making very demanding decisions about the use of the health dollar. One possible way to prevent increasing costs is to reach significant agreement on the proper care of the dying. Proper care for the dying is being considered, discussed, and evaluated by very thoughtful people. It is not governments which should decide who is to live or who is to die. There is the serious problem of the 'slippery slope' to euthanasia by omission if cost containment becomes the major force in formulating policy on the proper care of the dying. PMID:3612698

Hybrid protocols plus natural treatments for inflammatory conditions.

PubMed

1998-01-01

Hybrid protocols combine one, two, or three pharmaceutical drugs with several nutritional or immune-based therapies. These protocols are not limited solely to FDA-approved drugs or strictly to alternative therapies. The rationale for using a hybrid protocol is to find an effective antiviral regimen that also restores immune function. The goal is to obtain the benefits of protease inhibitors without viral resistance and side effects which include problems with fat metabolism and cholesterol levels. Natural treatments for inflammatory conditions are also described. Options include licorice root, ginger root, and slippery elm.

Sensory and instrumental analysis for slipperiness and compliance of food during swallowing.

PubMed

Seo, H-S; Hwang, I K; Han, T R; Kim, I S

2007-11-01

In spite of its importance, there have been few attempts to evaluate the sensory attributes of the food bolus during swallowing. In the current study, the slipperiness, the degree of slide for the food bolus through the mucosal surface of the oro-pharynx, and the compliance, how easily the shape of a food bolus can be transformed for automatic and comfortable swallowing, were derived among several sensory attributes related to the swallowing. Therefore, the study aims were twofold: (1) to develop the methods of sensory and instrumental analyses for determining the slipperiness and compliance of the food bolus during swallowing and (2) to examine the appropriateness of the newly designed devices by correlating the data between the sensory and instrumental analyses. Six commercial food products were evaluated by 10 trained panelists for each attribute. The devices for assessing each attribute were developed in consideration of the oro-pharyngeal movements. The sensory and instrumental analyses showed high correlation and regression coefficients as well as intensity differences of the 6 samples for each attribute. In conclusion, the slipperiness and the compliance were suitable for acquiring a better understanding of the sensory attributes of the food bolus during swallowing, and the newly developed devices showed a high potential for determining those attributes.

Heading off boundary problems: clinical supervision as risk management.

PubMed

Walker, R; Clark, J J

1999-11-01

The effective management of risk in clinical practice includes steps to limit harm to clients resulting from ethical violations or professional misconduct. Boundary problems constitute some of the most damaging ethical violations. The authors propose an active use of clinical supervision to anticipate and head off possible ethical violations by intervening when signs of boundary problems appear. The authors encourage a facilitative, Socratic method, rather than directive approaches, to help supervisees maximize their learning about ethical complexities. Building on the idea of a slippery slope, in which seemingly insignificant acts can lead to unethical patterns of behavior, the authors discuss ten cues to potential boundary problems, including strong feelings about a client; extended sessions with clients; gift giving between clinician and client; loans, barter, and sale of goods; clinician self-disclosures; and touching and sex. The authors outline supervisory interventions to be made when the cues are detected.

Aviation-fuel lubricity evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1988-07-01

Fuel-system components have experienced problems with the slipperiness or lubricity of the fuel back to the early 1960's. As a consequence of the level of refinement necessary for the PWA 523 fuel (now designated MIL-T-38219 grade JP-7) to obtain its high-temperature stability, many of the polar compounds contributing to lubricity had been removed, resulting in abnormal hydraulic fuel-pump wear. A lubricity-enhancing compound was developed (PWA 536) to eliminate the wear problem. High-pressure piston-type fuel pumps were one of the first parts of the engine fuel system to exhibit problems related to fuel properties. One early problem manifested itself as corrosionmore » of silver-plated slipper pads and was related to carryover of residual-chlorides fuel. Fuel controls were another part of the engine fuel system susceptible to fuel properties. Lack of lubricity agents caused fuel control sliding servo valves to stick.« less

Subjective assessments of floor slipperiness before and after walk under two lighting conditions.

PubMed

Li, Kai Way; Zhao, Caijun; Peng, Lu; Liu, Ai-Qun

2018-06-01

A gait experiment was performed. The participants were tested under shoes, floors, surface and lighting conditions. They gave floor slipperiness ratings before and after a gait trial. The perceived sense of slip (PSOS) was collected. It was found that the perceived floor slipperiness (PFS) before walking was affected significantly by the lighting, floor and surface conditions. Relative low PFS values were recorded under wet and detergent-contaminated conditions in the normal daylight condition as compared with those in the dimmed condition. The PFS after the gait was significantly affected by the floor and surface conditions. The PSOS was highly correlated with the PFS after trial. The regression analyses results indicated that both the coefficient of friction (COF) of the floor and lighting were primary predictors of the PFS before a gait. The COF and walking speed were the primary predictors of the PFS after a gait.

Support for Voluntary Euthanasia with No Logical Slippery Slope to Non-Voluntary Euthanasia.

PubMed

Daskal, Steven

2018-01-01

This paper demonstrates that acceptance of voluntary euthanasia does not generate commitment to either non-voluntary euthanasia or euthanasia on request. This is accomplished through analysis of John Keown's and David Jones's slippery slope arguments, and rejection of their view that voluntary euthanasia requires physicians to judge patients as better off dead. Instead, voluntary euthanasia merely requires physicians to judge patients as within boundaries of appropriate deference. This paper develops two ways of understanding and defending voluntary euthanasia on this model, one focused on the independent value of patients' autonomy and the other on the evidence of well-being provided by patients' requests. Both avoid the purported slippery slopes and both are independently supported by an analogy to uncontroversial elements of medical practice. Moreover, the proposed analyses of voluntary euthanasia suggest parameters for the design of euthanasia legislation, both supporting and challenging elements of existing laws in Oregon and the Netherlands.

Tradition and Culture Change in the Oklahoma Delaware Big House Community: 1867-1924.

DTIC Science & Technology

1981-01-01

sore throat Slippery Elm Ulmus fulva xkwikpi Drink from soaked strips of bark used to relieve chills Wild Black Cherry Prunus scrotina mwmfeli Boiled...Berries used to make dye for baskets Pokeberry Phytolacca americana cAk%.ngwtm Tonic given to chickens made from roots Slippery Elm Ulmus fulva xkwilpi...along drainages, forests of elm , ash, and cottonwood trees. The grasslands extended up the rockier col- luvial slopes where they gave way in places to

Compilation of Abstracts of Theses Submitted by Candidates for Degrees

DTIC Science & Technology

1985-09-30

University of Maine, 1973 Patricia A. Ohmiel Lieutenant, Unitod States Navy B.A., College of Our Lad./ of the Elms , 1973 The purpose of this thesis...B.A., Slippery Rock State ,Collee, 1968 M.A., Western Michigan University, 1976 The thesis presnets a theoretical development of a definition of...United States Air Force 9.S. Slippery Rock State College, 1971 This paper is an examination of the Romanian economy. It begins with a basic description

Perfluoropolyether-Impregnated Mesoporous Alumina Composites Overcome the Dewetting-Tribological Properties Trade-Off.

PubMed

Rowthu, Sriharitha; Hoffmann, Patrik

2018-03-28

Conventional omniphobic surfaces suffer from wear-sensitivity due to soft apolar coatings or substrates and protruding surface features that are eroded even for mild abrasion treatments, leading to the loss of dewetting properties after wear. Evidently, there was a trade-off between dewetting and tribological properties. Here, we show the establishment of self-healing slippery properties post severe abrasion by utilizing perfluoropolyether-impregnated mesoporous Al 2 O 3 (MPA) composites. The hard polar alumina matrix provides the optimal tribological properties, and the liquid lubricant in the porous network contributes to both tribological and self-healing dewetting properties. These composites sustained normal pressures up to 350 MPa during reciprocating sliding contacts. The severely abraded surfaces are capable of self-replenishing in ambient environment, driven by capillarity and surface diffusion processes, and regained their slippery properties toward water and hexadecane after 15 h of self-healing. Eventually, a dewetting-tribology diagram has been introduced to show different regimes, namely-optimal slippery properties, optimal tribological properties, and a mixed regime). We found out that the microstructural expression [Formula: see text] is a robust guiding tool to predict the regime of interest. This dewetting-tribological diagram may be marked as an inception to designing abrasion-resistant slippery liquid impregnated composites for overcoming the dewetting tribological properties trade-off. Such surfaces may potentially find applications in paint industries and as anti-icing surfaces.

Silicone Oil Swelling Slippery Surfaces Based on Mussel-Inspired Magnetic Nanoparticles with Multiple Self-Healing Mechanisms.

PubMed

Jin, Biyu; Liu, Mingzhu; Zhang, Qinghua; Zhan, Xiaoli; Chen, Fengqiu

2017-10-03

In this work, a novel substrate building block, magnetic Fe 3 O 4 nanoparticles armed with dopamine molecules were developed via mussel-inspired metal-coordination bonds. Combined with glycidyl methacrylate, polydimethylsiloxane propyl ether methacrylate, and diethylenetriamine, the original silicone oil swelling slippery liquid-infused porous surfaces (SLIPS) were first prepared by reversible coordinate bonds and strong covalent bonds cross-linking process. The matrix mechanical characteristics and surface physicochemical properties were systematically investigated. Results showed that the mechanical property of copolymer matrix and surface wettability of SLIPS can be remarkably recovered, which were due to the synergistic interactions of magnetic nanoparticles' intrinsic photothermal effect, reversible Fe-catechol coordination, and diffused lubricating liquid. After irradiating with sunlamp for 2 h and sequentially healing for 10 h under ambient conditions, the crack almost disappeared under optical microscopy with 78.25% healing efficiency (HEf) of toughness, and surface slippery was completely retrieved to water droplets. The efficient self-heal of copolymer matrix (66.5% HEf after eighth cutting-healing cycle) and recovering of slipperiness (SA < 5° and 5° < SA < 17° after fourth and eighth cutting-centrifuging-healing cycles, respectively) would extend longevity of SLIPS when subjected to multiple damages. Moreover, the prepared SLIPS displayed superb self-cleaning and liquid-repellent properties to a wide range of particulate contaminants and fluids.

Handling of buses on slippery roads during the influence of side wind--a study of the effects of different tyres.

PubMed

Hjort, Mattias; Jansson, Jonas

2010-05-01

Accident statistics assembled by the Swedish National Road and Transport Research Institute (VTI) have shown that buses are overrepresented when it comes to accidents on icy and snowy roads. For a better understanding of the problem, the performance of modern summer and winter tyres on winter road conditions had to be assessed. The objective of this work has been to go beyond standard road grip studies, and instead investigate how the driver's possibility to deal with one challenging situation depends on the tyres and tyre configuration. This paper describes a novel methodology where measurements with different tyres on ice in VTI's tyre test facility, enabled a simulator study for evaluating the impact of different tyre characteristics when driving in conditions with strong side wind on a slippery road. The main results of the study are: to deal with strong side wind, good front wheel grip is most important, and while non-studded winter tyres provided little or no improvement over summer tyres, studded winter tyres significantly reduced the risk to run off the road. Furthermore, it is very difficult for the drivers to judge, beforehand, whether a vehicle with a particular tyre configuration will perform good or bad. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Greece and Oman: Successful Anglo/American Counterinsurgencies Viewed from Current American Counterinsurgency Doctrine

DTIC Science & Technology

2009-06-12

MASTER OF MILITARY ART AND SCIENCE Military History by CLOYD A. SMITH JR., MAJOR, USA B.S., Education, Slippery Rock University, Slippery...THIS PAGE 19b. PHONE NUMBER (include area code) (U) (U) (U) (U) 143 Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 iii MASTER OF...want to thank my mother who has encouraged me throughout my life to always do my best. vi TABLE OF CONTENTS Page MASTER OF MILITARY ART AND

Jackson Mills and Mine Falls Dams, Nashua, New Hampshire. Reconnaissance Report, Hydroelectric Feasibility. Volume 1, Jackson Mills Dam.

DTIC Science & Technology

1979-12-01

Catalpa Solidago sp. Goldenrod Aster novae - angliae New England Aster Acer saccharum Sugar Maple Ulmus rubra Slippery elm Solanum hi rum Common...red pine, and hemlock are the common softwood species, and the common hardwood species include red maple, silver maple, white oak, willow, slippery ... elm and birch. In 1972, between 70 and 7S percent of the total area of the watershed consisted of forests and primarily wooded land. (Reference 3

Parameters, Journal of the U.S. Army War College. Volume 17, Number 1, Spring 1987

DTIC Science & Technology

1987-01-01

way that makes sense to a reader and then explaining them. Enter the clement of judgment, which immediately puts the reporter on a slippery slope ...reformers support something they call maneuver warfare. The concept of maneuver is itself a slippery one that the reformers describe using terms such as...nuclear euthanasia . So just as the military power must have a plausible enemy, so also it must have a plausible design for countering the public threat

Slippery Liquid-Infused Porous Surfaces and Droplet Transportation by Surface Acoustic Waves

NASA Astrophysics Data System (ADS)

Luo, J. T.; Geraldi, N. R.; Guan, J. H.; McHale, G.; Wells, G. G.; Fu, Y. Q.

2017-01-01

On a solid surface, a droplet of liquid will stick due to the capillary adhesion, and this causes low droplet mobility. To reduce contact line pinning, surface chemistry can be coupled to micro- and/or nanostructures to create superhydrophobic surfaces on which a droplet balls up into an almost spherical shape, thus, minimizing the contact area. Recent progress in soft matter has now led to alternative lubricant-impregnated surfaces capable of almost zero contact line pinning and high droplet mobility without causing droplets to ball up and minimize the contact area. Here we report an approach to surface-acoustic-wave- (SAW) actuated droplet transportation enabled using such a surface. These surfaces maintain the contact area required for efficient energy and momentum transfer of the wave energy into the droplet while achieving high droplet mobility and a large footprint, therefore, reducing the threshold power required to induce droplet motion. In our approach, we use a slippery layer of lubricating oil infused into a self-assembled porous hydrophobic layer, which is significantly thinner than the SAW wavelength, and avoid damping of the wave. We find a significant reduction (up to 85%) in the threshold power for droplet transportation compared to that using a conventional surface-treatment method. Moreover, unlike droplets on superhydrophobic surfaces, where interaction with the SAW induces a transition from a Cassie-Baxter state to a Wenzel state, the droplets on our liquid-impregnated surfaces remain in a mobile state after interaction with the SAW.

Nanotexturing of polystyrene surface in fluorocarbon plasmas: from sticky to slippery superhydrophobicity.

PubMed

Mundo, Rosa Di; Palumbo, Fabio; d'Agostino, Riccardo

2008-05-06

In this work plasma etching processes have been studied to roughen and fluorinate polystyrene surface as an easy method to achieve a superhydrophobic slippery character. Radiofrequency discharges have been fed with CF(4)/O(2) mixtures and the effect of the O(2):CF(4) ratio, the input power, and the treatment duration have been investigated in terms of wettability, with focus on sliding performances. For this purpose, surface morphological variations, evaluated by means of scanning electron microscopy and atomic force microscopy, together with the chemical assessment by X-ray photoelectron spectroscopy, have been correlated with water contact angle hysteresis and volume resolved sliding angle measurements. Results indicate that by increasing the height and decreasing the density of the structures formed by etching, within a tailored range, a transition from sticky to slippery superhydrophobicity occurs. A short treatment time (5 min) is sufficient to obtain such an effect, provided that a high power input is utilized. Optimized surfaces show a unaltered transparency to visible light according to the low roughness produced.

Fuzzy logic inference-based Pavement Friction Management and real-time slippery warning systems: A proof of concept study.

PubMed

Najafi, Shahriar; Flintsch, Gerardo W; Khaleghian, Seyedmeysam

2016-05-01

Minimizing roadway crashes and fatalities is one of the primary objectives of highway engineers, and can be achieved in part through appropriate maintenance practices. Maintaining an appropriate level of friction is a crucial maintenance practice, due to the effect it has on roadway safety. This paper presents a fuzzy logic inference system that predicts the rate of vehicle crashes based on traffic level, speed limit, and surface friction. Mamdani and Sugeno fuzzy controllers were used to develop the model. The application of the proposed fuzzy control system in a real-time slippery road warning system is demonstrated as a proof of concept. The results of this study provide a decision support model for highway agencies to monitor their network's friction and make appropriate judgments to correct deficiencies based on crash risk. Furthermore, this model can be implemented in the connected vehicle environment to warn drivers of potentially slippery locations. Published by Elsevier Ltd.

Transhumanism, medical technology and slippery slopes

PubMed Central

McNamee, M J; Edwards, S D

2006-01-01

In this article, transhumanism is considered to be a quasi‐medical ideology that seeks to promote a variety of therapeutic and human‐enhancing aims. Moderate conceptions are distinguished from strong conceptions of transhumanism and the strong conceptions were found to be more problematic than the moderate ones. A particular critique of Boström's defence of transhumanism is presented. Various forms of slippery slope arguments that may be used for and against transhumanism are discussed and one particular criticism, moral arbitrariness, that undermines both weak and strong transhumanism is highlighted. PMID:16943331

ST-LO (7 July -19 July 1944)

DTIC Science & Technology

1946-08-21

artillery, but the main troubles came in operating heavy vehicles through muddy fields, slippery trails, and hedgerows. The II9th Infantry felt...Army’s attack began, continued to balk aerial reconnaissance and to make the roads slippery and muddy. The axis of advance of the attacking task...JuLTI J ! VII - XIX CoIIps IOUNOIJIY AS OF 6 JULY .....lIT, If’ III IIIET!!!!. I o " ’" •’" .. flU ( \\ J Elm ’ "’/1’ v,",f «. ? --/ F:rm~91

Kuhse, Singer and slippery slopes.

PubMed Central

Fairbairn, G J

1988-01-01

Helga Kuhse and Peter Singer recently examined the view expressed by John Lorber that whereas at times it is permissible to allow severely handicapped infants to die, killing them must never be allowed. In attempting to demonstrate the mistaken nature of Lorber's fear that allowing active infanticide would lead us onto a slippery slope Kuhse and Singer make much use of John Harris's paper in the Journal of Medical Ethics in which he criticised Lorber's views. This paper examines some aspects of the case advanced by Kuhse and Singer and of the earlier paper by Harris. PMID:2972837

Euthanasia, dying well and the slippery slope.

PubMed

Allmark, P

1993-08-01

Arguments in favour of voluntary euthanasia tend to be put in utilitarian terms. This paper suggests an alternative, neo-Aristotelian argument justifying certain individual acts of both suicide and voluntary euthanasia. It goes on to examine the slippery slope arguments against legalizing euthanasia. It is suggested that such arguments cut both ways. However, the suggestion that we ought therefore to permit a social experiment in voluntary euthanasia is set alongside the Dutch experience. The latter seems to imply that if such experiments are to take place then great caution needs to be applied.

Some effects of adverse weather conditions on performance of airplane antiskid braking systems

NASA Technical Reports Server (NTRS)

Horne, W. B.; Mccarty, J. L.; Tanner, J. A.

1976-01-01

The performance of current antiskid braking systems operating under adverse weather conditions was analyzed in an effort to both identify the causes of locked-wheel skids which sometimes occur when the runway is slippery and to find possible solutions to this operational problem. This analysis was made possible by the quantitative test data provided by recently completed landing research programs using fully instrumented flight test airplanes and was further supported by tests performed at the Langley aircraft landing loads and traction facility. The antiskid system logic for brake control and for both touchdown and locked-wheel protection is described and its response behavior in adverse weather is discussed in detail with the aid of available data. The analysis indicates that the operational performance of the antiskid logic circuits is highly dependent upon wheel spin-up acceleration and can be adversely affected by certain pilot braking inputs when accelerations are low. Normal antiskid performance is assured if the tire-to-runway traction is sufficient to provide high wheel spin-up accelerations or if the system is provided a continuous, accurate ground speed reference. The design of antiskid systems is complicated by the necessity for tradeoffs between tire braking and cornering capabilities, both of which are necessary to provide safe operations in the presence of cross winds, particularly under slippery runway conditions.

Utilizing van der Waals Slippery Interfaces to Enhance the Electrochemical Stability of Silicon Film Anodes in Lithium-Ion Batteries.

PubMed

Basu, Swastik; Suresh, Shravan; Ghatak, Kamalika; Bartolucci, Stephen F; Gupta, Tushar; Hundekar, Prateek; Kumar, Rajesh; Lu, Toh-Ming; Datta, Dibakar; Shi, Yunfeng; Koratkar, Nikhil

2018-04-25

High specific capacity anode materials such as silicon (Si) are increasingly being explored for next-generation, high performance lithium (Li)-ion batteries. In this context, Si films are advantageous compared to Si nanoparticle based anodes since in films the free volume between nanoparticles is eliminated, resulting in very high volumetric energy density. However, Si undergoes volume expansion (contraction) under lithiation (delithiation) of up to 300%. This large volume expansion leads to stress build-up at the interface between the Si film and the current collector, leading to delamination of Si from the surface of the current collector. To prevent this, adhesion promotors (such as chromium interlayers) are often used to strengthen the interface between the Si and the current collector. Here, we show that such approaches are in fact counter-productive and that far better electrochemical stability can be obtained by engineering a van der Waals "slippery" interface between the Si film and the current collector. This can be accomplished by simply coating the current collector surface with graphene sheets. For such an interface, the Si film slips with respect to the current collector under lithiation/delithiation, while retaining electrical contact with the current collector. Molecular dynamics simulations indicate (i) less stress build-up and (ii) less stress "cycling" on a van der Waals slippery substrate as opposed to a fixed interface. Electrochemical testing confirms more stable performance and much higher Coulombic efficiency for Si films deposited on graphene-coated nickel (i.e., slippery interface) as compared to conventional nickel current collectors.

Foldable, High Energy Density Lithium Ion Batteries

NASA Astrophysics Data System (ADS)

Suresh, Shravan

Lithium Ion Batteries (LIBs) have become ubiquitous owing to its low cost, high energy density and, power density. Due to these advantages, LIBs have garnered a lot of attention as the primary energy storage devices in consumer electronics and electric vehicles. Recent advances in the consumer electronics research and, the drive to reduce greenhouse gases have created a demand for a shape conformable, high energy density batteries. This thesis focuses on the aforementioned two aspects of LIBs: (a) shape conformability (b) energy density and provides potential solutions to enhance them. This thesis is divided into two parts viz. (i) achieving foldability in batteries and, (ii) improving its energy density. Conventional LIBs are not shape conformable due to two limitations viz. inelasticity of metallic foils, and delamination of the active materials while bending. In the first part of the thesis (in Chapter 3), this problem is solved by replacing metallic current collector with Carbon Nanotube Macrofilms (CNMs). CNMs are superelastic films comprising of porous interconnected nanotube network. Using Molecular Dynamics (MD) simulation, we found that in the presence of an interconnected nanotube network CNMs can be fully folded. This is because the resultant stress due to bending and, the effective bending angle at the interface is reduced due to the network of nanotubes. Hence, unlike an isolated nanotube (which ruptures beyond 120 degrees of bending), a network of nanotubes can be completely folded. Thus, by replacing metallic current collector foils with CNMs, the flexibility limitation of a conventional LIB can be transcended. The second part of this thesis focusses on enhancing the energy density of LIBs. Two strategies adopted to achieve this goal are (a) removing the dead weight of the batteries, and (b) incorporating high energy density electrode materials. By incorporating CNMs, the weight of the batteries was reduced by 5-10 times due to low mass loading of CNMs (0.7 mg/cm2) as compared to metallic foils (5-10 mg/cm2). We show that the energy density of the fully foldable battery with CMF current collectors can be up to 2-fold higher than conventional LIBs at realistic mass loading (5mg/cm2) of the electrode materials. Therefore, not only does the CMF impart shape conformability, it also significantly boosts the energy density of the device by removing the dead weight of the batteries. Silicon (Si) shows enormous potential as the next generation anode material in Lithium-ion batteries due to its high energy denisty. However, Si is highly brittle, and in an effort to prevent Si from fracturing, the research community has migrated from the use of Si films to Si nanoparticle based electrodes. Such a strategy significantly reduces volumetric energy density due to the porosity of Si nanoparticle electrodes. In Chapters 4 and 5, we propose two solutions to incorporate Si films in foldable batteries. We show that contrary to conventional wisdom, Si films can be stabilized by two strategies: (a) anchoring the Si films to a carbon nanotube macrofilm (CNM) current-collector and (b) draping the films with a graphene monolayer. After electrochemical cycling, the graphene-coated Si films on CNM resembled a tough mud-cracked surface in which the graphene capping layer suppresses delamination and stabilizes the solid electrolyte interface by creating a slippery interface and reducing the stress transfer across the interface. The graphene-draped Si films on CNM exhibit long cycle life (> 1000 charge/discharge steps) with an average specific capacity of 806 mAh/g. The volumetric capacity averaged over 1000 cycles of charge/discharge is 2821 mAh/cm3 which is 2 to 5 times higher than what is reported in the literature for Si nanoparticle based electrodes. The graphene-draped Si anode could also be successfully cycled against commercial cathodes in a full-cell configuration. In Chapter 5, an alternate strategy has been explored to stabilize Si films by utilizing the role of a slippery interface in stabilizing Si. In this study, graphene films were used as a buffer layer on which Si films were deposited. Here, instead of a highly elastic matrix (as seen in Chapter 4), a slippery interface was used to stabilize Si. It was observed that due to the slippery interface, the Si films were stable and could retain a capacity of 900 mAh/g. These Si films also possessed a volumetric capacity of 5462 mAh/cm3. On the other hand, Si films with a rigid interface were completely eviscerated with a capacity retention of only 180 mAh/g. Thus, this thesis presents new ideas to achieve foldable high energy density Lithium Ion Battery. We also hope that this thesis serves as a platform for researchers to further explore this field.

Velcro on the slippery slope: the role of psychiatry in active voluntary euthanasia.

PubMed

Ryan, C J

1995-12-01

The aim of the paper is to determine the role that psychiatrists should play in legislation that establishes a right to active voluntary euthanasia (AVE). One version of the "slippery slope" argument, usually invoked against the legalisation of AVE, is recast as an argument for the introduction of strong safeguards in any future AVE legislation. The literature surrounding the prevalence of psychiatric illnesses in the terminally ill, physicians' ability to identify such illnesses and the aetiology of suicide in the terminally ill is examined. The strength of the slippery slope argument, combined with the poor ability of general physicians to diagnose psychiatric illness in the terminally ill, demands that any legislation allowing AVE should require a mandatory psychiatric review of the patient requesting euthanasia. Any legislation adopted that establishes a right to active voluntary euthanasia should include a mandatory psychiatric review of the person requesting euthanasia and a cooling off period before the request is acceded to. In addition, the discovery of a serious mental illness ought to disqualify the affected person from the right to AVE until that illness resolves.

The highly conserved codon following the slippery sequence supports -1 frameshift efficiency at the HIV-1 frameshift site.

PubMed

Mathew, Suneeth F; Crowe-McAuliffe, Caillan; Graves, Ryan; Cardno, Tony S; McKinney, Cushla; Poole, Elizabeth S; Tate, Warren P

2015-01-01

HIV-1 utilises -1 programmed ribosomal frameshifting to translate structural and enzymatic domains in a defined proportion required for replication. A slippery sequence, U UUU UUA, and a stem-loop are well-defined RNA features modulating -1 frameshifting in HIV-1. The GGG glycine codon immediately following the slippery sequence (the 'intercodon') contributes structurally to the start of the stem-loop but has no defined role in current models of the frameshift mechanism, as slippage is inferred to occur before the intercodon has reached the ribosomal decoding site. This GGG codon is highly conserved in natural isolates of HIV. When the natural intercodon was replaced with a stop codon two different decoding molecules-eRF1 protein or a cognate suppressor tRNA-were able to access and decode the intercodon prior to -1 frameshifting. This implies significant slippage occurs when the intercodon is in the (perhaps distorted) ribosomal A site. We accommodate the influence of the intercodon in a model of frame maintenance versus frameshifting in HIV-1.

How do the work environment and work safety differ between the dry and wet kitchen foodservice facilities?

PubMed Central

Kim, Jeong-Won; Ju, Se-Young; Go, Eun-Sun

2012-01-01

In order to create a worker-friendly environment for institutional foodservice, facilities operating with a dry kitchen system have been recommended. This study was designed to compare the work safety and work environment of foodservice between wet and dry kitchen systems. Data were obtained using questionnaires with a target group of 303 staff at 57 foodservice operations. Dry kitchen facilities were constructed after 2006, which had a higher construction cost and more finishing floors with anti-slip tiles, and in which employees more wore non-slip footwear than wet kitchen (76.7%). The kitchen temperature and muscular pain were the most frequently reported employees' discomfort factors in the two systems, and, in the wet kitchen, "noise of kitchen" was also frequently reported as a discomfort. Dietitian and employees rated the less slippery and slip related incidents in dry kitchens than those of wet kitchen. Fryer area, ware-washing area, and plate waste table were the slippery areas and the causes were different between the functional areas. The risk for current leakage was rated significantly higher in wet kitchens by dietitians. In addition, the ware-washing area was found to be where employees felt the highest risk of electrical shock. Muscular pain (72.2%), arthritis (39.1%), hard-of-hearing (46.6%) and psychological stress (47.0%) were experienced by employees more than once a month, particularly in the wet kitchen. In conclusion, the dry kitchen system was found to be more efficient for food and work safety because of its superior design and well managed practices. PMID:22977692

How do the work environment and work safety differ between the dry and wet kitchen foodservice facilities?

PubMed

Chang, Hye-Ja; Kim, Jeong-Won; Ju, Se-Young; Go, Eun-Sun

2012-08-01

In order to create a worker-friendly environment for institutional foodservice, facilities operating with a dry kitchen system have been recommended. This study was designed to compare the work safety and work environment of foodservice between wet and dry kitchen systems. Data were obtained using questionnaires with a target group of 303 staff at 57 foodservice operations. Dry kitchen facilities were constructed after 2006, which had a higher construction cost and more finishing floors with anti-slip tiles, and in which employees more wore non-slip footwear than wet kitchen (76.7%). The kitchen temperature and muscular pain were the most frequently reported employees' discomfort factors in the two systems, and, in the wet kitchen, "noise of kitchen" was also frequently reported as a discomfort. Dietitian and employees rated the less slippery and slip related incidents in dry kitchens than those of wet kitchen. Fryer area, ware-washing area, and plate waste table were the slippery areas and the causes were different between the functional areas. The risk for current leakage was rated significantly higher in wet kitchens by dietitians. In addition, the ware-washing area was found to be where employees felt the highest risk of electrical shock. Muscular pain (72.2%), arthritis (39.1%), hard-of-hearing (46.6%) and psychological stress (47.0%) were experienced by employees more than once a month, particularly in the wet kitchen. In conclusion, the dry kitchen system was found to be more efficient for food and work safety because of its superior design and well managed practices.

The Groningen Protocol for newborn euthanasia; which way did the slippery slope tilt?

PubMed

Verhagen, A A Eduard

2013-05-01

In The Netherlands, neonatal euthanasia has become a legal option and the Groningen Protocol contains an approach to identify situations in which neonatal euthanasia might be appropriate. In the 5 years following the publication of the protocol, neither the prediction that this would be the first step on a slippery slope, nor the prediction of complete transparency and legal control became true. Instead, we experienced a transformation of the healthcare system after antenatal screening policy became a part of antenatal care. This resulted in increased terminations of pregnancy and less euthanasia.

Carbon Fiber Composites

NASA Technical Reports Server (NTRS)

1997-01-01

HyComp(R), Inc. development a line of high temperature carbon fiber composite products to solve wear problems in the harsh environment of steel and aluminum mills. WearComp(R), self-lubricating composite wear liners and bushings, combines carbon graphite fibers with a polyimide binder. The binder, in conjunction with the fibers, provides the slippery surface, one that demands no lubrication, yet wears at a very slow rate. WearComp(R) typically lasts six to ten times longer than aluminum bronze. Unlike bronze, WearComp polishes the same surface and imparts a self-lube film for years of service. It is designed for continuous operation at temperatures of 550 degrees Fahrenheit and can operate under high compressive loads.

Is there a logical slippery slope from voluntary to nonvoluntary euthanasia?

PubMed

Jones, David Albert

2011-12-01

John Keown has constructed a logical slippery slope argument from voluntary euthanasia (VAE) to nonvoluntary euthanasia (NVAE). VAE if justified implies that death can be of overall benefit, in which case it should also be facilitated in those who cannot consent (NVAE). Hallvard Lillehammer asserts that Keown's argument rests on a fallacy. However, pace Lillehammer, it can be restated to escape this fallacy. Its validity is confirmed by applying to VAE some well-established general principles of medical decision making. Thus, either VAE and NVAE must be accepted together or, if NVAE is regarded as unacceptable, VAE should also be rejected.

Gender differences in offaxis neuromuscular control during stepping under a slippery condition.

PubMed

Lee, Song Joo; Ren, Yupeng; Geiger, François; Zhang, Li-Qun

2013-11-01

Females are at greater risks of musculoskeletal injuries than are males, which may be related to decreased neuromuscular control in axial and/or frontal planes, offaxis neuromuscular control. The objective of this study was to investigate gender differences in offaxis neuromuscular control during stepping under a slippery condition. Forty-three healthy subjects (21 males and 22 females) performed different stepping tasks under a slippery condition, namely, free pivoting task (FPT) to control axial plane pivoting, free sliding task (FST) to control frontal plane sliding, and free pivoting and sliding task (FPST) to control axial pivoting, and frontal sliding on a custom-made offaxis elliptical trainer. Compared to males, females showed significantly higher pivoting instability, higher max internal and external pivoting angles, higher mean max medial and lateral sliding distance, and higher entropy of time to peak EMG in the medial and lateral gastrocnemius muscles during the FPST and higher entropy of time to peak EMG in the lateral gastrocnemius muscle during the FPT and FST. The findings may help us understand potential injury risk factors associated with gender differences, and provide a basis for developing targeted neuromuscular training to improve offaxis neuromuscular control, and reduce musculoskeletal injuries associated with excessive offaxis loadings.

Not a slippery slope or sudden subversion: German medicine and national socialism in 1933.

PubMed

Hanauske-Abel, H M

1996-12-07

The history of medicine this century is darkened by the downfall of the German medical profession, exposed during the doctors' trial at Nuremberg in 1946. Relying largely on documents published during 1933 in German medical journals, this paper examines two widely accepted notions of those events, metaphorically termed "slippery slope" and "sudden subversion." The first connotes a gradual slide over infinitesimal steps until, suddenly, all footing is lost; the second conveys forced take over of the profession's leadership and values. Both concepts imply that the medical profession itself became the victim of circumstances. The slippery slope concept is a prominent figure of argument in the current debate on bioethics. The evidence presented here, however, strongly suggests that the German medical community set its own course in 1933. In some respects this course even outpaced the new government, which had to rein in the profession's eager pursuit of enforced eugenic sterilizations. In 1933 the convergence of political, scientific, and economic forces dramatically changed the relationship between the medical community and the government. That same convergence is occurring again and must be approached with great caution if medicine is to remain focused on the preservation of physical and medical integrity.

Condensation on slippery asymmetric bumps

NASA Astrophysics Data System (ADS)

Park, Kyoo-Chul; Kim, Philseok; Grinthal, Alison; He, Neil; Fox, David; Weaver, James C.; Aizenberg, Joanna

2016-03-01

Controlling dropwise condensation is fundamental to water-harvesting systems, desalination, thermal power generation, air conditioning, distillation towers, and numerous other applications. For any of these, it is essential to design surfaces that enable droplets to grow rapidly and to be shed as quickly as possible. However, approaches based on microscale, nanoscale or molecular-scale textures suffer from intrinsic trade-offs that make it difficult to optimize both growth and transport at once. Here we present a conceptually different design approach—based on principles derived from Namib desert beetles, cacti, and pitcher plants—that synergistically combines these aspects of condensation and substantially outperforms other synthetic surfaces. Inspired by an unconventional interpretation of the role of the beetle’s bumpy surface geometry in promoting condensation, and using theoretical modelling, we show how to maximize vapour diffusion fluxat the apex of convex millimetric bumps by optimizing the radius of curvature and cross-sectional shape. Integrating this apex geometry with a widening slope, analogous to cactus spines, directly couples facilitated droplet growth with fast directional transport, by creating a free-energy profile that drives the droplet down the slope before its growth rate can decrease. This coupling is further enhanced by a slippery, pitcher-plant-inspired nanocoating that facilitates feedback between coalescence-driven growth and capillary-driven motion on the way down. Bumps that are rationally designed to integrate these mechanisms are able to grow and transport large droplets even against gravity and overcome the effect of an unfavourable temperature gradient. We further observe an unprecedented sixfold-higher exponent of growth rate, faster onset, higher steady-state turnover rate, and a greater volume of water collected compared to other surfaces. We envision that this fundamental understanding and rational design strategy can be applied to a wide range of water-harvesting and phase-change heat-transfer applications.

Intertemporal Disagreement and Empirical Slippery Slope Arguments

PubMed Central

DOUGLAS, THOMAS

2011-01-01

One prevalent type of slippery slope argument has the following form: (1) by doing some initial act now, we will bring it about that we subsequently do some more extreme version of this act, and (2) we should not bring it about that we do this further act, therefore (3) we should not do the initial act. Such arguments are frequently regarded as mistaken, often on the grounds that they rely on speculative or insufficiently strong empirical premises. In this article I point out another location at which these arguments may go wrong: I argue that, in their standard form, the truth of their empirical premises constitutes evidence for the falsity of their normative premises. If we will, as predicted, do the further act in the future, this gives us at least a prima facie reason to believe that the performance of this further act would be good, and thus something we should try to bring about. I end by briefly assessing the dialectic implications of my argument. I delineate a subset of slippery slope arguments against which my objection may be decisive, consider how the proponents of such arguments may evade my objection by adding further premises, and examine the likely plausibility of these additional premises. PMID:21516214

Human cloning and 'posthuman' society.

PubMed

Blackford, Russell

2005-01-01

Since early 1997, when the creation of Dolly the sheep by somatic cell nuclear transfer was announced in Nature, numerous government reports, essays, articles and books have considered the ethical problems and policy issues surrounding human reproductive cloning. In this article, I consider what response a modern liberal society should give to the prospect of human cloning, if it became safe and practical. Some opponents of human cloning have argued that permitting it would place us on a slippery slope to a repugnant future society, comparable to that portrayed in Aldous Huxley's novel, Brave New World. I conclude that, leaving aside concerns about safety, none of the psychological or social considerations discussed in this article provides an adequate policy justification for invoking the state's coercive powers to prevent human cloning.

The politics of care in technoscience.

PubMed

Martin, Aryn; Myers, Natasha; Viseu, Ana

2015-10-01

Care is a slippery word. Any attempt to define it will be exceeded by its multivocality in everyday and scholarly use. In its enactment, care is both necessary to the fabric of biological and social existence and notorious for the problems that it raises when it is defined, legislated, measured, and evaluated. What care looks and feels like is both context-specific and perspective-dependent. Yet, this elusiveness does not mean that it lacks importance. In our engagements with the worlds that we study, construct, and inhabit, we cannot but care: care is an essential part of being a researcher and a citizen. To properly invite you into this Special Issue, then, we need to say something about what we mean when we write about care.

[Conversations on the "good death": the bioethical debate on euthanasia].

PubMed

Siqueira-Batista, Rodrigo; Schramm, Fermin Roland

2005-01-01

Despite extensive current debate on euthanasia, many open and apparently unsolvable issues persist, awaiting a better conceptual treatment. The area includes "prejudices and fundamentalisms" in relation to the theme, still viewed as taboo by a major share of society, specifically in the case of Brazil, while semantic imprecision in the term and argumentative tensions surround the issue, focusing on the principles of sacredness of life, quality of life, and autonomy and the so-called "slippery slope" argument. The purpose of the current essay is thus to serve as a sphere of inquiry concerning euthanasia, moving from historical antecedents towards a better solution to the problem and the demarcation of necessary future perspectives for enhanced understanding of the issue.

Effects of soft interactions and bound mobility on diffusion in crowded environments: a model of sticky and slippery obstacles

NASA Astrophysics Data System (ADS)

Stefferson, Michael W.; Norris, Samantha L.; Vernerey, Franck J.; Betterton, Meredith D.; E Hough, Loren

2017-08-01

Crowded environments modify the diffusion of macromolecules, generally slowing their movement and inducing transient anomalous subdiffusion. The presence of obstacles also modifies the kinetics and equilibrium behavior of tracers. While previous theoretical studies of particle diffusion have typically assumed either impenetrable obstacles or binding interactions that immobilize the particle, in many cellular contexts bound particles remain mobile. Examples include membrane proteins or lipids with some entry and diffusion within lipid domains and proteins that can enter into membraneless organelles or compartments such as the nucleolus. Using a lattice model, we studied the diffusive movement of tracer particles which bind to soft obstacles, allowing tracers and obstacles to occupy the same lattice site. For sticky obstacles, bound tracer particles are immobile, while for slippery obstacles, bound tracers can hop without penalty to adjacent obstacles. In both models, binding significantly alters tracer motion. The type and degree of motion while bound is a key determinant of the tracer mobility: slippery obstacles can allow nearly unhindered diffusion, even at high obstacle filling fraction. To mimic compartmentalization in a cell, we examined how obstacle size and a range of bound diffusion coefficients affect tracer dynamics. The behavior of the model is similar in two and three spatial dimensions. Our work has implications for protein movement and interactions within cells.

Correlation of subjective slipperiness judgements with quantitative COF (Coefficient Of Friction) measurements for structural steel

NASA Astrophysics Data System (ADS)

Purswell, Jerry L.; Schlegel, Robert E.

1988-06-01

When there is no simple or accurate procedure for measuring the coefficient of friction (COF) at a job site, workers and/or supervisors involved must make subjective judgments about the slipperiness of the walking and climbing surfaces and in turn decide whether the surface presents a safe or an unsafe condition for work. This project was designed to determine whether these subjective judgment calls did in fact agree with the COF measurements obtained using a mechanical device. It was noted that the coatings chosen for study were subject to a polishing factor by the boot soles during the trials, causing the COF values to become lower as the trials continued. Poor correlation was obtained between subjective ratings of slipperiness and the COF values measured before the trials began. A relatively high correlation was obtained between subjective ratings and the COF values measured after the trials had been completed. A difference was noted in the subjective ratings for the effects of water on a coating for column climbing, but not for walking a beam, suggesting the effects of water on a coating are related to the type of task being performed in steel erection. An increase in the measured COF was noted for all of the coatings when they were wet as compared to the dry condition. The importance of clean shoe soles was clearly demonstrated.

Not a slippery slope or sudden subversion: German medicine and national socialism in 1933.

PubMed Central

Hanauske-Abel, H. M.

1996-01-01

The history of medicine this century is darkened by the downfall of the German medical profession, exposed during the doctors' trial at Nuremberg in 1946. Relying largely on documents published during 1933 in German medical journals, this paper examines two widely accepted notions of those events, metaphorically termed "slippery slope" and "sudden subversion." The first connotes a gradual slide over infinitesimal steps until, suddenly, all footing is lost; the second conveys forced take over of the profession's leadership and values. Both concepts imply that the medical profession itself became the victim of circumstances. The slippery slope concept is a prominent figure of argument in the current debate on bioethics. The evidence presented here, however, strongly suggests that the German medical community set its own course in 1933. In some respects this course even outpaced the new government, which had to rein in the profession's eager pursuit of enforced eugenic sterilizations. In 1933 the convergence of political, scientific, and economic forces dramatically changed the relationship between the medical community and the government. That same convergence is occurring again and must be approached with great caution if medicine is to remain focused on the preservation of physical and medical integrity. Images p1456-a p1457-a p1457-b p1458-a p1459-a p1459-b Fig 1 PMID:8973235

The "Slippery Slope" of Science

ERIC Educational Resources Information Center

Etzioni, Amitai

1974-01-01

Discusses the controversy surrounding amniocentesis (used to detect and abort mongoloid fetuses) as an example of the ethical and social assessments that must be made with new scientific and medical developments. (JR)

29 CFR 1910.26 - Portable metal ladders.

Code of Federal Regulations, 2011 CFR

2011-07-01

... of ladder equipment must be employed by the users. The following rules and regulations are essential... to oil and grease, equipment should be cleaned of oil, grease, or slippery materials. This can easily...

29 CFR 1910.26 - Portable metal ladders.

Code of Federal Regulations, 2013 CFR

2013-07-01

... of ladder equipment must be employed by the users. The following rules and regulations are essential... to oil and grease, equipment should be cleaned of oil, grease, or slippery materials. This can easily...

29 CFR 1910.26 - Portable metal ladders.

Code of Federal Regulations, 2014 CFR

2014-07-01

... of ladder equipment must be employed by the users. The following rules and regulations are essential... to oil and grease, equipment should be cleaned of oil, grease, or slippery materials. This can easily...

7 CFR 51.491 - Wet slip.

Code of Federal Regulations, 2012 CFR

2012-01-01

... time of packing in which the stem scar is abnormally large, excessively wet and slippery, yields to slight pressure, and is frequently accompanied by fresh radial growth cracks at the edge of the stem scar. ...

7 CFR 51.491 - Wet slip.

Code of Federal Regulations, 2010 CFR

2010-01-01

... time of packing in which the stem scar is abnormally large, excessively wet and slippery, yields to slight pressure, and is frequently accompanied by fresh radial growth cracks at the edge of the stem scar. ...

7 CFR 51.491 - Wet slip.

Code of Federal Regulations, 2011 CFR

2011-01-01

... time of packing in which the stem scar is abnormally large, excessively wet and slippery, yields to slight pressure, and is frequently accompanied by fresh radial growth cracks at the edge of the stem scar. ...

The Road to Bribery and Corruption.

PubMed

Köbis, Nils C; van Prooijen, Jan-Willem; Righetti, Francesca; Van Lange, Paul A M

2017-03-01

Major forms of corruption constitute a strong threat to the functioning of societies. The most frequent explanation of how severe corruption emerges is the slippery-slope metaphor-the notion that corruption occurs gradually. While having widespread theoretical and intuitive appeal, this notion has barely been tested empirically. We used a recently developed paradigm to test whether severely corrupt acts happen gradually or abruptly. The results of four experimental studies revealed a higher likelihood of severe corruption when participants were directly given the opportunity to engage in it (abrupt) compared with when they had previously engaged in minor forms of corruption (gradual). Neither the size of the payoffs, which we kept constant, nor evaluations of the actions could account for these differences. Contrary to widely shared beliefs, sometimes the route to corruption leads over a steep cliff rather than a slippery slope.

Can we Relate Basal Ice Mechanics to Seismic Observations of the Bed?

NASA Astrophysics Data System (ADS)

Kyrke-Smith, T.; Gudmundsson, G. H.; Farrell, P. E.

2017-12-01

We compare results from two different methods of quanitfying basal ice conditions, by investigating correlations between seismically-derived estimates of basal acoustic impedance and basal slipperiness values obtained from a surface-to-bed inversion of a Stokes ice flow model. Using high-resolution measurements taken along several seismic profiles on Pine Island Glacier (PIG), we find no correlation between acoustic impedance and retrieved basal slipperiness wihtin each individual profile. However, there is a correlation when comparing averaged values across each distinct profile. Nevertheless, there is no clear way of incorporating seismic measurements of bed properties on ice streams into ice flow models. We conclude that more theoretical work needs done before constraints on mechanical conditions at the ice-bed interface from acoustic impedance measurements can be of direct use to ice sheet models.

The role of haptic cues from rough and slippery surfaces in human postural control

NASA Technical Reports Server (NTRS)

Jeka, J. J.; Lackner, J. R.

1995-01-01

Haptic information is critically important in complex sensory-motor tasks such as manipulating objects. Its comparable importance in spatial orientation is only beginning to be recognized. We have shown that postural sway in humans is significantly reduced by lightly touching a stable surface with a fingertip at contact force levels far below those physically necessary to stabilize the body. To investigate further the functional relationship between contact forces at the hand and postural equilibrium, we had subjects stand in the tandem Romberg stance while being allowed physically supportive (force contact) and non-physically supportive (touch contact) amounts of index fingertip force on surfaces with different frictional characteristics. Mean sway amplitude (MSA) was reduced by over 50% with both touch and force contact of the fingertip, compared to standing without fingertip contact. No differences in MSA were observed when touching rough or slippery surfaces. The amplitude of EMG activity in the peroneal muscles and the timing relationships between fingertip forces, body sway and EMG activity suggested that with touch contact of the finger or with force contact on a slippery surface long-loop "reflexes" involving postural muscles were stabilizing sway. With force contact of the fingertip on a rough surface, MSA reduction was achieved primarily through physical support of the body. This pattern of results indicates that light touch contact cues from the fingertip in conjunction with proprioceptive signals about arm configuration are providing information about body sway that can be used to reduce MSA through postural muscle activation.

A New Localization System for Indoor Service Robots in Low Luminance and Slippery Indoor Environment Using Afocal Optical Flow Sensor Based Sensor Fusion.

PubMed

Yi, Dong-Hoon; Lee, Tae-Jae; Cho, Dong-Il Dan

2018-01-10

In this paper, a new localization system utilizing afocal optical flow sensor (AOFS) based sensor fusion for indoor service robots in low luminance and slippery environment is proposed, where conventional localization systems do not perform well. To accurately estimate the moving distance of a robot in a slippery environment, the robot was equipped with an AOFS along with two conventional wheel encoders. To estimate the orientation of the robot, we adopted a forward-viewing mono-camera and a gyroscope. In a very low luminance environment, it is hard to conduct conventional feature extraction and matching for localization. Instead, the interior space structure from an image and robot orientation was assessed. To enhance the appearance of image boundary, rolling guidance filter was applied after the histogram equalization. The proposed system was developed to be operable on a low-cost processor and implemented on a consumer robot. Experiments were conducted in low illumination condition of 0.1 lx and carpeted environment. The robot moved for 20 times in a 1.5 × 2.0 m square trajectory. When only wheel encoders and a gyroscope were used for robot localization, the maximum position error was 10.3 m and the maximum orientation error was 15.4°. Using the proposed system, the maximum position error and orientation error were found as 0.8 m and within 1.0°, respectively.

A New Localization System for Indoor Service Robots in Low Luminance and Slippery Indoor Environment Using Afocal Optical Flow Sensor Based Sensor Fusion

PubMed Central

Yi, Dong-Hoon; Lee, Tae-Jae; Cho, Dong-Il “Dan”

2018-01-01

In this paper, a new localization system utilizing afocal optical flow sensor (AOFS) based sensor fusion for indoor service robots in low luminance and slippery environment is proposed, where conventional localization systems do not perform well. To accurately estimate the moving distance of a robot in a slippery environment, the robot was equipped with an AOFS along with two conventional wheel encoders. To estimate the orientation of the robot, we adopted a forward-viewing mono-camera and a gyroscope. In a very low luminance environment, it is hard to conduct conventional feature extraction and matching for localization. Instead, the interior space structure from an image and robot orientation was assessed. To enhance the appearance of image boundary, rolling guidance filter was applied after the histogram equalization. The proposed system was developed to be operable on a low-cost processor and implemented on a consumer robot. Experiments were conducted in low illumination condition of 0.1 lx and carpeted environment. The robot moved for 20 times in a 1.5 × 2.0 m square trajectory. When only wheel encoders and a gyroscope were used for robot localization, the maximum position error was 10.3 m and the maximum orientation error was 15.4°. Using the proposed system, the maximum position error and orientation error were found as 0.8 m and within 1.0°, respectively. PMID:29320414

Osteoarthritis

MedlinePlus

... Topics Osteoarthritis English Español 繁體中文 한국어 tiếng Việt Osteoarthritis Basics In-Depth Download Download EPUB Download PDF What is it? Points To Remember About Osteoarthritis Osteoarthritis is a disease that damages the slippery ...

What's Spit?

MedlinePlus

... day, every day. It's made up mostly of water, with a few other chemicals. The slippery stuff is produced by the salivary (say: SAL-uh-vair-ee) glands. These glands are found on the inside of each cheek, on the ...

The incompetent patient on the slippery slope.

PubMed

Dresser, R; Whitehouse, P J

1994-01-01

Most patients suffering from progressive dementia have thoughts, emotions, perspectives, and perceptions of a world of experience. Decisions about life-sustaining treatment should incorporate a principled approach to evaluating what life is like for these patients.

Slipperiness of highway pavements : phase 1, final report.

DOT National Transportation Integrated Search

1971-01-01

To gain knowledge of the wet friction levels needed for various traffic conditions, this study evaluated the relationships between (1) accumulated traffic volumes and pavement friction, and (2) percent wet accidents and pavement friction. In addition...

Slippery road detection and evaluation.

DOT National Transportation Integrated Search

2012-05-31

The key project objectives were: 1) the demonstration and evaluation of a low cost data acquisition system that would provide a rich data set accumulated from multiple vehicles, and 2) establish how this data, coupled with situational data from other...

Student Loans: A Slippery Lifeline.

ERIC Educational Resources Information Center

Bollag, Burton

2001-01-01

Discusses how, as more countries have instituted or increased tuition, student loans have spread. But the programs are a flop in much of the world, raising fears that many low-income people will be shut out of higher education. (EV)

'Insect aquaplaning' on a superhydrophilic hairy surface: how Heliamphora nutans Benth. pitcher plants capture prey.

PubMed

Bauer, Ulrike; Scharmann, Mathias; Skepper, Jeremy; Federle, Walter

2013-02-22

Trichomes are a common feature of plants and perform important and diverse functions. Here, we show that the inward-pointing hairs on the inner wall of insect-trapping Heliamphora nutans pitchers are highly wettable, causing water droplets to spread rapidly across the surface. Wetting strongly enhanced the slipperiness and increased the capture rate for ants from 29 to 88 per cent. Force measurements and tarsal ablation experiments revealed that wetting affected the insects' adhesive pads but not the claws, similar to the 'aquaplaning' mechanism of (unrelated) Asian Nepenthes pitcher plants. The inward-pointing trichomes provided much higher traction when insects were pulled outwards. The wetness-dependent capture mechanisms of H. nutans and Nepenthes pitchers present a striking case of functional convergence, whereas the use of wettable trichomes constitutes a previously unknown mechanism to make plant surfaces slippery.

Form follows function: morphological diversification and alternative trapping strategies in carnivorous Nepenthes pitcher plants.

PubMed

Bauer, Ulrike; Clemente, C J; Renner, T; Federle, W

2012-01-01

Carnivorous plants of the genus Nepenthes have evolved a striking diversity of pitcher traps that rely on specialized slippery surfaces for prey capture. With a comparative study of trap morphology, we show that Nepenthes pitcher plants have evolved specific adaptations for the use of either one of two distinct trapping mechanisms: slippery wax crystals on the inner pitcher wall and 'insect aquaplaning' on the wet upper rim (peristome). Species without wax crystals had wider peristomes with a longer inward slope. Ancestral state reconstructions identified wax crystal layers and narrow, symmetrical peristomes as ancestral, indicating that wax crystals have been reduced or lost multiple times independently. Our results complement recent reports of nutrient source specializations in Nepenthes and suggest that these specializations may have driven speciation and rapid diversification in this genus. © 2011 The Authors. Journal of Evolutionary Biology © 2011 European Society For Evolutionary Biology.

Molecular Insight into the Slipperiness of Ice.

PubMed

Weber, Bart; Nagata, Yuki; Ketzetzi, Stefania; Tang, Fujie; Smit, Wilbert J; Bakker, Huib J; Backus, Ellen H G; Bonn, Mischa; Bonn, Daniel

2018-05-16

Measurements of the friction coefficient of steel-on-ice over a large temperature range reveal very high friction at low temperatures (-100 °C) and a steep decrease in the friction coefficient with increasing temperature. Very low friction is only found over the limited temperature range typical for ice skating. The strong decrease in the friction coefficient with increasing temperature exhibits Arrhenius behavior with an activation energy of E a ≈ 11.5 kJ mol -1 . Remarkably, molecular dynamics simulations of the ice-air interface reveal a very similar activation energy for the mobility of surface molecules. Weakly hydrogen-bonded surface molecules diffuse over the surface in a rolling motion, their number and mobility increasing with increasing temperature. This correlation between macroscopic friction and microscopic molecular mobility indicates that slippery ice arises from the high mobility of its surface molecules, making the ice surface smooth and the shearing of the weakly bonded surface molecules easy.

Superhydrophobic-like tunable droplet bouncing on slippery liquid interfaces

PubMed Central

Hao, Chonglei; Li, Jing; Liu, Yuan; Zhou, Xiaofeng; Liu, Yahua; Liu, Rong; Che, Lufeng; Zhou, Wenzhong; Sun, Dong; Li, Lawrence; Xu, Lei; Wang, Zuankai

2015-01-01

Droplet impacting on solid or liquid interfaces is a ubiquitous phenomenon in nature. Although complete rebound of droplets is widely observed on superhydrophobic surfaces, the bouncing of droplets on liquid is usually vulnerable due to easy collapse of entrapped air pocket underneath the impinging droplet. Here, we report a superhydrophobic-like bouncing regime on thin liquid film, characterized by the contact time, the spreading dynamics, and the restitution coefficient independent of underlying liquid film. Through experimental exploration and theoretical analysis, we demonstrate that the manifestation of such a superhydrophobic-like bouncing necessitates an intricate interplay between the Weber number, the thickness and viscosity of liquid film. Such insights allow us to tune the droplet behaviours in a well-controlled fashion. We anticipate that the combination of superhydrophobic-like bouncing with inherent advantages of emerging slippery liquid interfaces will find a wide range of applications. PMID:26250403

Cell adhesion on nanotextured slippery superhydrophobic substrates.

PubMed

Di Mundo, Rosa; Nardulli, Marina; Milella, Antonella; Favia, Pietro; d'Agostino, Riccardo; Gristina, Roberto

2011-04-19

In this work, the response of Saos2 cells to polymeric surfaces with different roughness/density of nanometric dots produced by a tailored plasma-etching process has been studied. Topographical features have been evaluated by atomic force microscopy, while wetting behavior, in terms of water-surface adhesion energy, has been evaluated by measurements of drop sliding angle. Saos2 cytocompatibility has been investigated by scanning electron microscopy, fluorescent microscopy, and optical microscopy. The similarity in outer chemical composition has allowed isolation of the impact of the topographical features on cellular behavior. The results indicate that Saos2 cells respond differently to surfaces with different nanoscale topographical features, clearly showing a certain inhibition in cell adhesion when the nanoscale is particularly small. This effect appears to be attenuated in surfaces with relatively bigger nanofeatures, though these express a more pronounced slippery/dry wetting character. © 2011 American Chemical Society

Project Sunshine and the slippery slope: the ethics of tissue sampling for strontium-90.

PubMed

Roff, Sue Rabbitt

2002-01-01

When citizens of Atlantic alliance countries are being asked by their elected leaders to suspend many of the fundamental rights of democracy in order to defend them, it is timely to consider the perils of the slippery slope that was opened up by the harvesting of human bones and tissue for studies of strontium-90 fallout during the height of the cold war. In particular, the need to collect samples from recently deceased infants and children seems to have overridden the rights of parents to determine what became of their loved ones after death. Forty years later, parents and others question whether the fact that this research contributed significantly to the partial moratorium on atmospheric tests justified the overriding of their rights. It also reminds us that the testing of nuclear devices, even in the defence of democracy, presents global health hazards.

‘Insect aquaplaning’ on a superhydrophilic hairy surface: how Heliamphora nutans Benth. pitcher plants capture prey

PubMed Central

Bauer, Ulrike; Scharmann, Mathias; Skepper, Jeremy; Federle, Walter

2013-01-01

Trichomes are a common feature of plants and perform important and diverse functions. Here, we show that the inward-pointing hairs on the inner wall of insect-trapping Heliamphora nutans pitchers are highly wettable, causing water droplets to spread rapidly across the surface. Wetting strongly enhanced the slipperiness and increased the capture rate for ants from 29 to 88 per cent. Force measurements and tarsal ablation experiments revealed that wetting affected the insects' adhesive pads but not the claws, similar to the ‘aquaplaning’ mechanism of (unrelated) Asian Nepenthes pitcher plants. The inward-pointing trichomes provided much higher traction when insects were pulled outwards. The wetness-dependent capture mechanisms of H. nutans and Nepenthes pitchers present a striking case of functional convergence, whereas the use of wettable trichomes constitutes a previously unknown mechanism to make plant surfaces slippery. PMID:23256197

Evaluation of remedial treatments at skid accident locations.

DOT National Transportation Integrated Search

1974-01-01

The Virginia Department of Highways has for many years been concerned with the slipperiness of highway pavements, and has undertaken remedial action at numerous high wet accident locations. The purpose of this study was to evaluate the remedial actio...

Particular adaptations to potentially slippery surfaces: the effects of friction on consecutive postural adjustments (CPA).

PubMed

Memari, Sahel; Le Bozec, Serge; Bouisset, Simon

2014-02-21

This research deals with the postural adjustments that occur after the end of voluntary movement ("consecutive postural adjustments": CPAs). The influence of a potentially slippery surface on CPA characteristics was considered, with the aim of exploring more deeply the postural component of the task-movement. Seven male adults were asked to perform a single step, as quickly as possible, to their own footprint marked on the ground. A force plate measured the resultant reaction forces along the antero-posterior axis (R(x)) and the centre of pressure (COP) displacements along the antero-posterior and lateral axes (Xp and Yp). The velocity of the centre of gravity (COG) along the antero-posterior axis and the corresponding impulse (∫R(x)dt) were calculated; the peak velocity (termed "progression velocity": V(xG)) was measured. The required coefficient of friction (RCOF) along the progression axis (pμ(x)) was determined. Two materials, differing by their COF, were laid at foot contact (FC), providing a rough foot contact (RoFC), and a smooth foot contact (SmFC) considered to be potentially slippery. Two step lengths were also performed: a short step (SS) and a long step (LS). Finally, the subjects completed four series of ten steps each. These were preceded by preliminary trials, to allow them to acquire the necessary adaptation to experimental conditions. The antero-posterior force time course presented a positive phase, that included APAs ("anticipatory postural adjustments") and step execution (STEP), followed by a negative one, corresponding to CPAs. The backward impulse (CPI) was equal to the forward one (BPI), independently of friction and progression velocity. Moreover, V(xG) did not differ according to friction, but was faster when the step length was greater. Last CPA peak amplitudes (pCPA) were significantly greater and CPA durations (dCPA) shorter for RoFC and conversely for SmFC, contrary to APA. Finally, the results show a particular adaptation to the potentially slippery surface (SmFC). They suggest that adherence modulation at foot contact could be one of the rules for controlling COG displacement in single stepping. Consequently, the actual coefficient of friction value might be implemented in the motor programme at a higher level than the voluntary movement specific parameters. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

The Right to Die in Chronic Disorders of Consciousness: Can We Avoid the Slippery Slope Argument?

PubMed

Calabrò, Rocco Salvatore; Naro, Antonino; De Luca, Rosaria; Russo, Margherita; Caccamo, Lory; Manuli, Alfredo; Bramanti, Alessia; Bramanti, Placido

2016-01-01

Managing individuals with chronic disorders of consciousness raises ethical questions about the appropriateness of maintaining life-sustaining treatments and end-of-life decisions for those who are unable to make decisions for themselves. For many years, the positions fostering the "sanctity" of human life (i.e., life is inviolable in any case) have led to maintaining life-sustaining treatments (including artificial nutrition and hydration) in patients with disorders of consciousness, allowing them to live for as long as possible. Seldom have positions that foster "dignity" of human life (i.e., everyone has the right to a worthy death) allowed for the interruption of life-sustaining treatments in some patients with disorders of consciousness. Indeed, most ethical analyses conclude that the decision to interrupt life-sustaining therapies, including artificial nutrition and hydration, should be guided by reliable information about how the patient wants or wanted to be treated and/or whether the patient wants or wanted to live in such a condition. This would be in keeping with the principles of patient-centered medicine, and would conciliate the duty of respecting both the dignity and sanctity of life and the right to a worthy death. This "right to die" has been recognized in some countries, which have legalized euthanasia and/or physician-assisted suicide, but some groups fear that legalizing end-of-life decisions for some patients may result in the inappropriate use of euthanasia, both voluntary and nonvoluntary forms (slippery slope argument) in other patients. This review describes the current opinions and ethical issues concerning end-of-life decisions in patients with disorders of consciousness, with a focus on the impact misdiagnoses of disorders of consciousness may have on end-of-life decisions, the concept of "dignity" and "sanctity" of human life in view of end-of-life decisions, and the risk of the slippery slope argument when dealing with euthanasia and end-of-life decisions. We argue that the patient's diagnosis, prognosis, and wishes should be central to determining the most appropriate therapeutic approach and end-of-life decisions for that individual. Each patient's diagnosis, prognosis, and wishes should also be central to legislation that guarantees the right to die and prevents the slippery slope argument through the establishment of evidence-based criteria and protocol for managing these patients with disorders of consciousness.

An Op-Ed concerning steroids and the law: how the Internet has changed illegal drug trade and its prosecution.

PubMed

Adams, Jill U

2010-06-01

Athletes take anabolic steroids to increase strength, build muscle, and improve performance, even though the practice is banned by many athletic organizations and can cause serious adverse effects. State and federal laws regulate the sale and distribution of anabolic steroids to restrict their use, and yet, the Internet has become a world-flattening promoter of easy access to the drugs. While scientists continue to study the potential therapeutic and toxic effects of steroid drugs, prosecutors endeavor to uphold the laws in the slippery online environment. Here's the story of Albany County District Attorney's Office efforts to prosecute illegal online drug sales in 2000s. The discoveries of prosecutors and scientists alike should help inform policy makers of how best to manage the problem that anabolic steroids present to society. Copyright 2010 Elsevier Inc. All rights reserved.

Philosophy, medicine and its technologies.

PubMed Central

Almond, B

1988-01-01

There is a need to bring ethics and medical practice closer together, despite the risk and problems this may involve. Deontological ethics may promote sanctity of life considerations against the quality of life considerations favoured by consequentialists or utilitarians; while talk of respect for life and the value of life may point to more qualified ethical positions. This paper argues for a respect-for-life position, dismissing a utilitarian cost-benefit outlook as too simplistic; but an unqualified fixed principles approach is also ruled out, both because of its unacceptable consequences in individual cases and also because of its reliance on the slippery slope argument which, it is argued, is logically and psychologically deficient. The case of genetic engineering provides an example in which the notion of respect may operate, but in which broad general principles also apply. A cautious conservatism towards accepted principles is recommended in the development of medical technologies. PMID:3236344

Philosophy, medicine and its technologies.

PubMed

Almond, B

1988-12-01

There is a need to bring ethics and medical practice closer together, despite the risk and problems this may involve. Deontological ethics may promote sanctity of life considerations against the quality of life considerations favoured by consequentialists or utilitarians; while talk of respect for life and the value of life may point to more qualified ethical positions. This paper argues for a respect-for-life position, dismissing a utilitarian cost-benefit outlook as too simplistic; but an unqualified fixed principles approach is also ruled out, both because of its unacceptable consequences in individual cases and also because of its reliance on the slippery slope argument which, it is argued, is logically and psychologically deficient. The case of genetic engineering provides an example in which the notion of respect may operate, but in which broad general principles also apply. A cautious conservatism towards accepted principles is recommended in the development of medical technologies.

A Cognitive Game Theoretic Analysis of Conflict Alerts in Air Traffic Control

NASA Technical Reports Server (NTRS)

Erev, Ido; Gopher, Daniel; Remington, Roger

1999-01-01

The current research was motivated by the recommendation made by a joint Government/Industry committee to introduce a new traffic control system, referred to as the Free Flight. This system is designed to use recent new technology to facilitate efficient and safe air transportation. We addressed one of the major difficulties that arise in the design of this and similar multi-agent systems: the adaptive (and slippery) nature of human agents. To facilitate a safe and efficient design of this multi-agent system, designers have to rely on assessments of the expected behavior of the different agents under various scenarios. Whereas the behavior of the computerized agents is predictable, the behavior of the human agents (including air traffic controllers and pilots) is not. Experimental and empirical observations suggest that human agents are likely to adjust their behavior to the design of the system. To see the difficulty that the adaptive nature of human agents creates assume that a good approximation of the way operators currently behave is available. Given this information an optimal design can be performed. The problem arises as the human operator will learn to adjust their behavior to the new system. Following this adjustment process the assumptions made by the designer concerning the operators behavior will no longer be accurate and the system might reach a suboptimal state. In extreme situations these potential suboptimal states might involve unnecessary risk. That is, the fact that operators learn in an adaptive fashion does not imply that the system will become safer as they gain experience. At least in the context of Safety dilemmas, experience can lead to a pareto deficient risk taking behavior.

Assessment of roadway surface conditions using onboard vehicle sensors : final report phase I.

DOT National Transportation Integrated Search

2015-03-01

Real-time assessment of road surface conditions can be used to provide valuable safety information to travelers when roads are slippery (e.g., contaminated roads, heavy rain, black ice, etc.). Identification of these hazardous surface conditions usin...

The Spiritual Development of Nonheterosexual Undergraduate Students

ERIC Educational Resources Information Center

Payne Gold, Shaunna

2010-01-01

Spiritual development and nonheterosexual identity development are both slippery topics that are individually complex and multifaceted. Scholars from various disciplines have called for a deeper understanding of the intersection of spirituality and nonheterosexual identity (Buchanan, Dzelme, Harris & Hecker, 2001; Love, Bock Jannarone, &…

Stability of viscosity stratified flows down an incline: Role of miscibility and wall slip

NASA Astrophysics Data System (ADS)

Ghosh, Sukhendu; Usha, R.

2016-10-01

The effects of wall velocity slip on the linear stability of a gravity-driven miscible two-fluid flow down an incline are examined. The fluids have the matched density but different viscosity. A smooth viscosity stratification is achieved due to the presence of a thin mixed layer between the fluids. The results show that the presence of slip exhibits a promise for stabilizing the miscible flow system by raising the critical Reynolds number at the onset and decreasing the bandwidth of unstable wave numbers beyond the threshold of the dominant instability. This is different from its role in the case of a single fluid down a slippery substrate where slip destabilizes the flow system at the onset. Though the stability properties are analogous to the same flow system down a rigid substrate, slip is shown to delay the surface mode instability for any viscosity contrast. It has a damping/promoting effect on the overlap modes (which exist due to the overlap of critical layer of dominant disturbance with the mixed layer) when the mixed layer is away/close from/to the slippery inclined wall. The trend of slip effect is influenced by the location of the mixed layer, the location of more viscous fluid, and the mass diffusivity of the two fluids. The stabilizing characteristics of slip can be favourably used to suppress the non-linear breakdown which may happen due to the coexistence of the unstable modes in a flow over a substrate with no slip. The results of the present study suggest that it is desirable to design a slippery surface with appropriate slip sensitivity in order to meet a particular need for a specific application.

Avoiding the Slippery Slope: Conducting Effective Interventions

DTIC Science & Technology

2013-06-01

internal memo from NATO headquarters in Zagreb , Croatia discussed these options in detail. Withdraw- ing more than 40,000 troops from an active war zone...Interoffice Memorandum, UN Peace Forces, HQ Zagreb to Special Representative of the Secretary-General, July 17, 1995, Lester Pearson Canadian Peacekeeping

75 FR 47888 - IntelliDriveSM

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-09

... activities). Environment/fuel use. Pavement conditions (e.g., snow or ice cover, surface roughness, pothole.../destination pair, by time period, weighted by trip volume. System Throughput is intended to quantify the total.... Pavement conditions such as snow or ice cover, slippery conditions, surface roughness, or pothole detection...

With a flick of the lid: a novel trapping mechanism in Nepenthes gracilis pitcher plants.

PubMed

Bauer, Ulrike; Di Giusto, Bruno; Skepper, Jeremy; Grafe, T Ulmar; Federle, Walter

2012-01-01

Carnivorous pitcher plants capture prey with modified leaves (pitchers), using diverse mechanisms such as 'insect aquaplaning' on the wet pitcher rim, slippery wax crystals on the inner pitcher wall, and viscoelastic retentive fluids. Here we describe a new trapping mechanism for Nepenthes gracilis which has evolved a unique, semi-slippery wax crystal surface on the underside of the pitcher lid and utilises the impact of rain drops to 'flick' insects into the trap. Depending on the experimental conditions (simulated 'rain', wet after 'rain', or dry), insects were captured mainly by the lid, the peristome, or the inner pitcher wall, respectively. The application of an anti-slip coating to the lower lid surface reduced prey capture in the field. Compared to sympatric N. rafflesiana, N. gracilis pitchers secreted more nectar under the lid and less on the peristome, thereby directing prey mainly towards the lid. The direct contribution to prey capture represents a novel function of the pitcher lid.

Optimal proportion of studded tyres in traffic flow to prevent polishing of an icy road.

PubMed

Tuononen, Ari J; Sainio, Panu

2014-04-01

Studded tyres can significantly wear the road surface and increase particle emissions from the road surface, which has a negative impact on air quality in urban areas. However, road wear might have a positive aspect by roughening the road surface and thus preventing polishing. As a consequence, other vehicles than the ones using studded tyres might also benefit from the usage of studded tyres. The impact of the proportion of studded tyres in the traffic flow on the tyre-ice friction coefficient was studied with a fleet of real cars in a closed environment under strict procedural control. The results show that a proportion of 25-50% studded tyres in the traffic flow is enough to prevent ice from developing in a manner that is critically slippery for non-studded winter tyres. It was also observed that the visual appearance of the ice surface does not indicate if the ice has become more slippery or not. Copyright © 2013 Elsevier Ltd. All rights reserved.

Magnetic slippery extreme icephobic surfaces

PubMed Central

Irajizad, Peyman; Hasnain, Munib; Farokhnia, Nazanin; Sajadi, Seyed Mohammad; Ghasemi, Hadi

2016-01-01

Anti-icing surfaces have a critical footprint on daily lives of humans ranging from transportation systems and infrastructure to energy systems, but creation of these surfaces for low temperatures remains elusive. Non-wetting surfaces and liquid-infused surfaces have inspired routes for the development of icephobic surfaces. However, high freezing temperature, high ice adhesion strength, and high cost have restricted their practical applications. Here we report new magnetic slippery surfaces outperforming state-of-the-art icephobic surfaces with a ice formation temperature of −34 °C, 2–3 orders of magnitude higher delay time in ice formation, extremely low ice adhesion strength (≈2 Pa) and stability in shear flows up to Reynolds number of 105. In these surfaces, we exploit the magnetic volumetric force to exclude the role of solid–liquid interface in ice formation. We show that these inexpensive surfaces are universal and can be applied to all types of solids (no required micro/nano structuring) with no compromise to their unprecedented properties. PMID:27824053

Non-faith-based arguments against physician-assisted suicide and euthanasia.

PubMed

Sulmasy, Daniel P; Travaline, John M; Mitchell, Louise A; Ely, E Wesley

2016-08-01

This article is a complement to "A Template for Non-Religious-Based Discussions Against Euthanasia" by Melissa Harintho, Nathaniel Bloodworth, and E. Wesley Ely which appeared in the February 2015 Linacre Quarterly . Herein we build upon Daniel Sulmasy's opening and closing arguments from the 2014 Intelligence Squared debate on legalizing assisted suicide, supplemented by other non-faith-based arguments and thoughts, providing four nontheistic arguments against physician-assisted suicide and euthanasia: (1) "it offends me"; (2) slippery slope; (3) "pain can be alleviated"; (4) physician integrity and patient trust. Lay Summary: Presented here are four non-religious, reasonable arguments against physician-assisted suicide and euthanasia: (1) "it offends me," suicide devalues human life; (2) slippery slope, the limits on euthanasia gradually erode; (3) "pain can be alleviated," palliative care and modern therapeutics more and more adequately manage pain; (4) physician integrity and patient trust, participating in suicide violates the integrity of the physician and undermines the trust patients place in physicians to heal and not to harm.

With a Flick of the Lid: A Novel Trapping Mechanism in Nepenthes gracilis Pitcher Plants

PubMed Central

Bauer, Ulrike; Di Giusto, Bruno; Skepper, Jeremy; Grafe, T. Ulmar; Federle, Walter

2012-01-01

Carnivorous pitcher plants capture prey with modified leaves (pitchers), using diverse mechanisms such as ‘insect aquaplaning’ on the wet pitcher rim, slippery wax crystals on the inner pitcher wall, and viscoelastic retentive fluids. Here we describe a new trapping mechanism for Nepenthes gracilis which has evolved a unique, semi-slippery wax crystal surface on the underside of the pitcher lid and utilises the impact of rain drops to ‘flick’ insects into the trap. Depending on the experimental conditions (simulated ‘rain’, wet after ‘rain’, or dry), insects were captured mainly by the lid, the peristome, or the inner pitcher wall, respectively. The application of an anti-slip coating to the lower lid surface reduced prey capture in the field. Compared to sympatric N. rafflesiana, N. gracilis pitchers secreted more nectar under the lid and less on the peristome, thereby directing prey mainly towards the lid. The direct contribution to prey capture represents a novel function of the pitcher lid. PMID:22719998

Can Seismic Observations of Bed Conditions on Ice Streams Help Constrain Parameters in Ice Flow Models?

NASA Astrophysics Data System (ADS)

Kyrke-Smith, Teresa M.; Gudmundsson, G. Hilmar; Farrell, Patrick E.

2017-11-01

We investigate correlations between seismically derived estimates of basal acoustic impedance and basal slipperiness values obtained from a surface-to-bed inversion using a Stokes ice flow model. Using high-resolution measurements along several seismic profiles on Pine Island Glacier (PIG), we find no significant correlation at kilometer scale between acoustic impedance and either retrieved basal slipperiness or basal drag. However, there is a stronger correlation when comparing average values along the individual profiles. We hypothesize that the correlation appears at the length scales over which basal variations are important to large-scale ice sheet flow. Although the seismic technique is sensitive to the material properties of the bed, at present there is no clear way of incorporating high-resolution seismic measurements of bed properties on ice streams into ice flow models. We conclude that more theoretical work needs to be done before constraints on mechanical conditions at the ice-bed interface from acoustic impedance measurements can be of direct use to ice sheet models.

Hiding in the Shadows: Philip Morris and the Use of Third Parties to Oppose Ingredient Disclosure Regulations

PubMed Central

Velicer, Clayton; Glantz, Stanton A.

2015-01-01

Background In 1996 Massachusetts proposed regulations that would require tobacco companies to disclose information about the ingredients in their products on a by-brand basis. This paper examines the strategies employed by Philip Morris to stop these regulations from being implemented. Methods and Finding We used previously secret tobacco industry documents and published literature to examine the activities of the tobacco companies after the regulations were proposed. Philip Morris hired a public relations firm to establish a coalition that was instructed to oppose the regulations by linking them to other industrial sectors (the slippery slope) and stating they would damage the state's economy. Philip Morris also retained a polling firm to test the popularity of specific arguments against ingredient disclosure and developed a strategic plan for opposing similar regulations in Vermont. Conclusion Tobacco companies have historically used third parties to form coalitions to oppose ingredient disclosure regulations. These coalitions have had success preventing regulations from being implemented after they are initially proposed by creating the appearance of local opposition. With countries around the world currently implementing ingredient disclosure regulations in the WHO Framework Convention on Tobacco, governments and regulatory agencies should be aware of the political strategies that the tobacco companies have used to create the impression of popular opposition to these measures. PMID:26717245

Accelerometer-controlled automatic braking system

NASA Technical Reports Server (NTRS)

Dreher, R. C.; Sleeper, R. K.; Nayadley, J. R., Sr.

1973-01-01

Braking system, which employs angular accelerometer to control wheel braking and results in low level of tire slip, has been developed and tested. Tests indicate that system is feasible for operations on surfaces of different slipperinesses. System restricts tire slip and is capable of adapting to rapidly-changing surface conditions.

Warning! Slippery Road Ahead: Internet Access and District Liability.

ERIC Educational Resources Information Center

Mazur, Joan M.

1995-01-01

As schools merge onto the information highway, districts must address their liability associated with Internet access. Schools need a practical policy supporting high access to global educational resources while limiting district liability. USENET provides easy access to controversial and pornographic materials. This article outlines federal…

The Right to Die in Chronic Disorders of Consciousness: Can We Avoid the Slippery Slope Argument?

PubMed Central

Naro, Antonino; De Luca, Rosaria; Russo, Margherita; Caccamo, Lory; Manuli, Alfredo; Bramanti, Alessia; Bramanti, Placido

2016-01-01

Managing individuals with chronic disorders of consciousness raises ethical questions about the appropriateness of maintaining life-sustaining treatments and end-of-life decisions for those who are unable to make decisions for themselves. For many years, the positions fostering the “sanctity” of human life (i.e., life is inviolable in any case) have led to maintaining life-sustaining treatments (including artificial nutrition and hydration) in patients with disorders of consciousness, allowing them to live for as long as possible. Seldom have positions that foster “dignity” of human life (i.e., everyone has the right to a worthy death) allowed for the interruption of life-sustaining treatments in some patients with disorders of consciousness. Indeed, most ethical analyses conclude that the decision to interrupt life-sustaining therapies, including artificial nutrition and hydration, should be guided by reliable information about how the patient wants or wanted to be treated and/or whether the patient wants or wanted to live in such a condition. This would be in keeping with the principles of patient-centered medicine, and would conciliate the duty of respecting both the dignity and sanctity of life and the right to a worthy death. This “right to die” has been recognized in some countries, which have legalized euthanasia and/or physician-assisted suicide, but some groups fear that legalizing end-of-life decisions for some patients may result in the inappropriate use of euthanasia, both voluntary and nonvoluntary forms (slippery slope argument) in other patients. This review describes the current opinions and ethical issues concerning end-of-life decisions in patients with disorders of consciousness, with a focus on the impact misdiagnoses of disorders of consciousness may have on end-of-life decisions, the concept of “dignity” and “sanctity” of human life in view of end-of-life decisions, and the risk of the slippery slope argument when dealing with euthanasia and end-of-life decisions. We argue that the patient’s diagnosis, prognosis, and wishes should be central to determining the most appropriate therapeutic approach and end-of-life decisions for that individual. Each patient’s diagnosis, prognosis, and wishes should also be central to legislation that guarantees the right to die and prevents the slippery slope argument through the establishment of evidence-based criteria and protocol for managing these patients with disorders of consciousness. PMID:28210521

One Nation, Many Gods

ERIC Educational Resources Information Center

Kilman, Carrie

2007-01-01

For decades, educators have wrestled with how to handle the increasingly diverse religions of an increasingly diverse student body. Sometimes, the line between church and state--what schools can and cannot do under the Constitution--can feel confusing and slippery. Today, religion has become a subject one high school teachers describes as even…

Rethinking Critical Thinking

ERIC Educational Resources Information Center

Downs, Christopher J.

2008-01-01

Critical thinking is of primary importance in higher education, yet the concept remains slippery and the skill elusive. The author argues that most current critical thinking textbooks are out of line with the seminal work of John Dewey. Rather than logical argument and justification, it is suggested that carefulness, open-mindedness and creativity…

Mentoring, Mentors and Proteges.

ERIC Educational Resources Information Center

Peper, John B.

This paper reports on research into the concept of mentoring from many educational perspectives, based on six papers presented at the Annual Meeting of the American Educational Research Association in April 1994. The paper notes that mentoring is a slippery concept, without a precise operational definition; definitions used in the six papers are…

A Not-so-Slippery Slope

ERIC Educational Resources Information Center

Brandt, Allan M.

2010-01-01

Few issues have drawn such persistent and divisive debate in recent years as tobacco-industry funding of university research. Although a number of institutions have developed policies to prohibit such funding in the last few years, others have taken large grants from tobacco companies. Today, a number of prominent hospitals, medical schools, and…

Elm genetic diversity and hybridization in the presence of Dutch elm disease

Treesearch

Johanne Brunet; Raymond P. Guries

2017-01-01

The impact of Dutch elm disease (DED) on the genetic diversity of slippery elm (Ulmus rubra) is summarized and its potential impact on the genetic diversity of other North American native elms, American elm (U. americana), rock elm (U. thomasii), winged elm (U. alata), cedar elm (

Temperature and Humidity Effects on the Co-efficient of Friction Value After Application of Liquid Anti-icing Chemicals

DOT National Transportation Integrated Search

1999-09-30

The purpose of this research was to determine whether there existed a chemical "slipperiness" as a result of a transition from liquid to a solid, and vice versa, of typical anti-icing chemicals presently in use. Experiments were carried out in May to...

Collegiality: Leading Us into Fantasy--the Paradoxical Resilience of Collegiality in Academic Leadership

ERIC Educational Resources Information Center

Kligyte, Giedre; Barrie, Simon

2014-01-01

It has been argued that leadership in higher education differs from leadership in other organisational contexts, in part because of the culture of collegiality and autonomy underpinning academic work. Collegiality, however, is a complex and somewhat "slippery" idea that features in academic leadership literature in a variety of,…

Slippery as Fish... but Already Caught? Secondary Students' Engagement with School Rules

ERIC Educational Resources Information Center

Raby, Rebecca; Domitrek, Julie

2007-01-01

Drawing on nine focus groups with secondary students in southern Ontario, we investigated secondary students' perceptions of, and experiences with, school codes of conduct and their application. While generally supporting the "big" rules such as no weapons, students engaged more critically with minor ones. We drew on Foucault's…

A Moving Tale

ERIC Educational Resources Information Center

Science Teacher, 2005

2005-01-01

Massachusetts Institute of Technology (MIT) mathematicians have discovered how certain insects can climb what to them are steep, slippery slopes in the water's surface without moving their limbs, and do it at high speed. Welcome to the world of the tiny creatures that live on the surface of ponds, lakes, and other standing bodies of water. For the…

AIDS and Rational Suicide: A Counseling Psychology Perspective or a Slide on the Slippery Slope.

ERIC Educational Resources Information Center

Rogers, James R.; Britton, Paula J.

1994-01-01

Responds to Werth's (1992) arguing for rational suicide for individuals diagnosed with Acquired Immune Deficiency Syndrome (AIDS). Commends Werth's willingness to address issue of rational suicide for individuals diagnosed with AIDS, but expresses concerns about data supporting his rationale and implications for counseling psychology and society…

Geography of Religion at Slippery Rock State College.

ERIC Educational Resources Information Center

Hannon, Thomas J., Jr.

The paper presents a course outline intended for use in a one semester geography of religion course on the college level. Geography of religion is interpreted to include all aspects of the impact of religion on cultural, political, and economic geography. Objectives are to emphasize distributional aspects of religion and religious phenomena,…

The Slippery Slope to Efficiency? An Australian Perspective on School/University Partnerships for Teacher Professional Learning

ERIC Educational Resources Information Center

Mockler, Nicole

2013-01-01

Large-scale school/university partnerships for the enhancement of teacher professionalism and teacher professional learning have been part of the teacher development landscape in Australia for the past two decades. This paper takes a historical perspective on Australian school/university partnerships through detailing three national projects over…

The Drug-Testing Dilemma.

ERIC Educational Resources Information Center

Dowling-Sendor, Benjamin

1999-01-01

The recent decision of the 8th U.S. Circuit Court of Appeals in "Miller," based on the school district's interest in preventing possible abuse, gave legal support for random, suspiciousless drug testing of students. Contends this is a "slippery slope" argument, that the key factor in deciding whether to adopt a policy of random drug testing should…

Preparing Students to Take SOA/CAS Exam FM/2

ERIC Educational Resources Information Center

Marchand, Richard J.

2014-01-01

This paper provides suggestions for preparing students to take the actuarial examination on financial mathematics, SOA/CAS Exam FM/2. It is based on current practices employed at Slippery Rock University, a small public liberal arts university. Detailed descriptions of our Theory of Interest course and subsequent Exam FM/2 prep course are provided…

Mathematical Designs for Teaching and Learning Composition.

ERIC Educational Resources Information Center

Laque, Carol Feiser

Algebraic equations and geometric forms are useful in teaching and learning composition. Algebraic equations can illustrate the modular nature of paragraph structures and can be refined by students to describe types of paragraphs. Discussion of the "slippery" nature of words and their power of transformation can be a lecture topic as the class…

Conservation of genetic diversity in slippery elm (Ulmus rubra) in Wisconsin despite the devastating impact of Dutch elm disease

USDA-ARS?s Scientific Manuscript database

Forest trees tend to be genetically diverse, a condition related to their longevity, outcrossing mating system and extensive gene flow that maintains high levels of genetic diversity within populations. Forest pest epidemics are responsible for many historic and contemporary population declines repo...

Site Investigation Report Fort Devens Groups 3,5, and 6. Volume 1 of 2: Report Text

DTIC Science & Technology

1996-01-01

and slippery , and samplers were belayed by rope and harness to prevent accidents. Location ABB Environmental Services, Inc. GRP356.SI 6917.07 0 01/19...red maple (Acer rubrum), American elm (Ulmus americana), and white pine (Pinus strobus). Other trees observed include pitch pine (Pinus rigida

Battle Analysis: Rapido River Crossing, Offensive, Deliberate Attack, River Crossing, January 1944

DTIC Science & Technology

1984-05-01

Even the few employed were difficult to use due to the slippery surface and the lack of handrails. Direct and indirect fire chewed them up. The...were placed in the water and went down quickly, sometimes carrying men loaded with heavy combat equipment. 42 mmmimm^^mtm—mm^ elm ^tmmMMM

Recreational Terror: Postmodern Elements of the Contemporary Horror Film.

ERIC Educational Resources Information Center

Pinedo, Isabel

1996-01-01

States that the boundaries of any genre are slippery, but this is particularly true of the postmodern horror film, since the definition of postmodern is itself blurry. Argues that postmodern horror films include films from 1968 onward. Defines postmodernism and the characteristics of postmodern horror, including violence, violation of boundaries,…

Rational hypocrisy: a Bayesian analysis based on informal argumentation and slippery slopes.

PubMed

Rai, Tage S; Holyoak, Keith J

2014-01-01

Moral hypocrisy is typically viewed as an ethical accusation: Someone is applying different moral standards to essentially identical cases, dishonestly claiming that one action is acceptable while otherwise equivalent actions are not. We suggest that in some instances the apparent logical inconsistency stems from different evaluations of a weak argument, rather than dishonesty per se. Extending Corner, Hahn, and Oaksford's (2006) analysis of slippery slope arguments, we develop a Bayesian framework in which accusations of hypocrisy depend on inferences of shared category membership between proposed actions and previous standards, based on prior probabilities that inform the strength of competing hypotheses. Across three experiments, we demonstrate that inferences of hypocrisy increase as perceptions of the likelihood of shared category membership between precedent cases and current cases increase, that these inferences follow established principles of category induction, and that the presence of self-serving motives increases inferences of hypocrisy independent of changes in the actions themselves. Taken together, these results demonstrate that Bayesian analyses of weak arguments may have implications for assessing moral reasoning. © 2014 Cognitive Science Society, Inc.

Fabrication of Slippery Lubricant-Infused Porous Surface for Inhibition of Microbially Influenced Corrosion.

PubMed

Wang, Peng; Zhang, Dun; Lu, Zhou; Sun, Shimei

2016-01-20

Microbially influenced corrosion (MIC) accelerates the failure of metal in a marine environment. In this research, slippery lubricant-infused porous surface (SLIPS) was designed on aluminum, and its great potential for inhibiting MIC induced by sulfate-reducing bacteria (SRB) was demonstrated in a simulated marine environment. The inhibition mechanism of SLIPS to MIC was proposed based on its effective roles in the suppression of SRB settlement and isolation effect to corrosive metabolites. The liquid-like property is demonstrated to be the major contributor to the suppression effect of SLIPS to SRB settlement. The effects of environmental factors (static and dynamic conditions) and lubricant type to SRB settlement over SLIPS were also investigated. It was indicated that the as-fabricated SLIPS can inhibit the SRB settlement in both static and dynamic marine conditions, and lubricant type presents a negligible effect on the SRB settlement. These results will provide a series of foundational data for the future practical application of SLIPS in the marine environment, and also a lubricant selecting instruction to construct SLIPS for MIC control.

Non-faith-based arguments against physician-assisted suicide and euthanasia

PubMed Central

Sulmasy, Daniel P.; Travaline, John M.; Mitchell, Louise A.; Ely, E. Wesley

2016-01-01

This article is a complement to “A Template for Non-Religious-Based Discussions Against Euthanasia” by Melissa Harintho, Nathaniel Bloodworth, and E. Wesley Ely which appeared in the February 2015 Linacre Quarterly. Herein we build upon Daniel Sulmasy's opening and closing arguments from the 2014 Intelligence Squared debate on legalizing assisted suicide, supplemented by other non-faith-based arguments and thoughts, providing four nontheistic arguments against physician-assisted suicide and euthanasia: (1) “it offends me”; (2) slippery slope; (3) “pain can be alleviated”; (4) physician integrity and patient trust. Lay Summary: Presented here are four non-religious, reasonable arguments against physician-assisted suicide and euthanasia: (1) “it offends me,” suicide devalues human life; (2) slippery slope, the limits on euthanasia gradually erode; (3) “pain can be alleviated,” palliative care and modern therapeutics more and more adequately manage pain; (4) physician integrity and patient trust, participating in suicide violates the integrity of the physician and undermines the trust patients place in physicians to heal and not to harm. PMID:27833206

A Cool Sport Full of Physics

NASA Astrophysics Data System (ADS)

Haché, Alain

2008-10-01

Of all sports, ice hockey is possibly the one with the widest array of physics elements in it. The game provides many examples that can bring physics to life in the classroom. Ice hockey (or just "hockey" as many Canadians would say) sees athletes sliding on ice at high speeds and in various ways, shooting and slapping pucks, and colliding against each other. The interaction between the skate blade and the ice is a problem of great physical complexity. The question "Why is ice so slippery?" has puzzled generations of scientists and, surprisingly, clear answers have come relatively recently. There is even some optics involved in hockey: how many sports are watched behind tempered glass (or Plexiglas) windows? The optical and mechanical properties of these materials are worth a physics classroom discussion. In this paper, I will review a few topics discussed at length in my book The Physics of Hockey.1,2 Interested readers may also find additional articles on our website.3

Commodification and privacy: a Lockean perspective.

PubMed

Volkman, Richard

2010-09-01

This paper defends the thesis that privacy as a right is derived from fundamental rights to life, liberty, and property and does not permit restricting the commodification of bodily material; however, privacy as life, liberty, property does require conventions that ensure a robust and just market in bodily material. The analysis proceeds by defending a general commitment to liberty and markets, but not in the manner one might expect from a 'doctrinaire' libertarian. Ethical concerns about commodification are legitimate in the context of new medical and information technologies, but these concerns are not sufficiently well defined to justify political conclusions, since not every ethical concern is in itself a political concern, and the best way to resolve certain ethical difficulties is to draw up political boundaries that facilitate the discovery and testing of various solutions to our ethical puzzles. To illustrate the point, I will indicate how privacy as life, liberty, property defines such a dynamic solution to the problems of commodification of human bodily material and slippery information in insurance markets.

Dielectric Anistropy and Elastic Constants Near the Nematic-Smectic A Transition

NASA Astrophysics Data System (ADS)

Visco, Angelo; Mahmood, Rizwan; Zapien, Donald

The present work examines the behavior of dielectric anisotropy and the elastic constants associated with the deformation of liquid crystal molecules under the influence of an AC electric field and measured by an Automatic Liquid Crystal Tester (ALCT). The systems investigated are of various concentrations of 5CB (4-Cyano-4'-pentylbiphenyl) and 8CB (4-octyl-4'-cyanobiphenyl) liquid crystal as a function of temperature. These studies are important due to the complexity of the coupling between the orientational (nematic) and positional (smectic A) order parameters that can drive this transition to be either continuous or discontinuous. Theoretically, NA transition is weakly first order due to nematic director fluctuations in semctic A phase. This is similar to the transition from normal to superconductor. Thus, there exists a triple point similar to He3/He4 mixtures. Moreover, despite more than four decades of intense work, our understanding of this complex and interesting problem remains unclear. The funding for the project was provided by Slippery Rock University (2015-2016).

Re-Gendering the Social Work Curriculum: New Realities and Complexities

ERIC Educational Resources Information Center

McPhail, Beverly A.

2008-01-01

With the advent of the 2nd wave of the women's movement, numerous voices within social work academia called for the inclusion of gendered content in the curriculum. The subsequent addition of content on women was a pivotal achievement for the social work profession. However, gender is an increasingly slippery concept. A current call for…

Standing Firm on Slippery Slopes: Understanding Ethical Boundaries in Student Affairs Work

ERIC Educational Resources Information Center

Liddell, Debora; Hornak, Anne M.; Ignelzi, Michael G.

2016-01-01

Understanding ethical boundaries in student affairs work can be challenging and difficult to navigate for student affairs professionals. The purpose of this article is to examine the complexities of dual relationships and the ethical issues that may arise. As a result, the authors offer tools to (a) identify various perspectives in resolving…

Reinforcing the "Diminished" Subject? the Implications of the "Vulnerability Zeitgeist" for Well-Being in Educational Settings

ERIC Educational Resources Information Center

Ecclestone, K.; Rawdin, C.

2016-01-01

Pessimistic discourses about crises in youth and children's well-being, mental health and vulnerability permeate English educational policy and practice. These generate vague and slippery elisions of wellbeing and mental health, and the related rise of an ad hoc, confusing market of psycho-emotional interventions promoted by new types of…

Bathing Techniques for Children Who Have Cerebral Palsy.

ERIC Educational Resources Information Center

Dunaway, Avtar; Klein, Marsha Dunn

Helpful techniques are offered for making bathtime easier, safer, and more fun for children who have cerebral palsy. Safety in the bathtub is stressed, both for the child who needs protection from slippery surfaces and extreme water temperature, and for the caregiver who must lift and carry the child without causing injury to the lower back.…

A Study of the Comparative Effectiveness of Zoology Prerequisites at Slippery Rock State College.

ERIC Educational Resources Information Center

Morrison, William Sechler

This study compared the effectiveness of three sequences of prerequisite courses required before taking zoology. Sequence 1 prerequisite courses consisted of general biology and human biology; Sequence 2 consisted of general biology; and Sequence 3 required cell biology. Zoology students in the spring of 1972 were pretest and a posttest. The mean…

Elm genetic diversity and hybridization in the presence of Dutch elm disease

USDA-ARS?s Scientific Manuscript database

Dutch elm disease (DED) has devastated native North American elm species for more than 75 years. The impact of DED on the genetic diversity of one native elm species, U. rubra or slippery elm, is summarized and its potential impact on the genetic diversity of the other four North American native elm...

Dutch elm disease

Treesearch

James W. Walters

1992-01-01

Since its discovery in the United States in 1930, Dutch elm disease has killed thousands of native elms. The three native elms, American, slippery, and rock, have little or no resistance to Dutch elm disease, but individual trees within each species vary in susceptibility to the disease. The most important of these, American elm, is scattered in upland stands but is...

The case of Ms B: suicide's slippery slope?

PubMed

Keown, J

2002-08-01

In the case of Ms B, the High Court ruled that as Ms B was a competent adult patient, her doctors acted unlawfully in overriding her refusal of life-preserving ventilation. This commentary considers whether this case supports the proposition that in English law the right to refuse treatment extends even to refusals which are clearly suicidal.

Imaginaries of "East and West": Slippery Curricular Signifiers in Education.

ERIC Educational Resources Information Center

Aoki, Ted T.

The labels "East and West," suggest two distinct cultural wholes. "East and West" is understood as a binary of two separate preexisting entities, which can be bridged or brought together to conjoin in an "and." This image has dominated Western modernist thought in the works of historians, anthropologists, and others. Educators, like tourists or…

Retaining a Foothold on the Slippery Paths of Academia: University Women, Indirect Discrimination, and the Academic Marketplace

ERIC Educational Resources Information Center

Wilson, Jacqueline Z.; Marks, Genee; Noone, Lynne; Hamilton-Mackenzie, Jennifer

2010-01-01

This paper examines indirect discrimination in Australian universities that tends to obstruct and delay women's academic careers. The topic is defined and contextualised via a 1998 speech by the Australian Human Rights Commission's Sex Discrimination Commissioner, juxtaposed with a brief contemporaneous exemplar. The paper discusses the prevalence…

Drag Reduction On Multiscale Superhydrophobic Surfaces

NASA Astrophysics Data System (ADS)

Jenner, Elliot; Barbier, Charlotte; D'Urso, Brian

2013-11-01

Fluid drag reduction is of great interest in a variety of fields, including hull engineering, microfluidics, and drug delivery. We fabricated samples with multi-scale superhydrophobic surfaces, which consist of hexagonally self-ordered microscopic spikes grown via anodization on macroscopic grooves cut in aluminum. The hydrodynamic drag properties were studied with a cone-and-plate rheometer, showing significant drag reduction near 15% in turbulent flow and near 30% in laminar flow. In addition to these experiments, numerical simulations were performed in order to estimate the slip length at high speeds. Furthermore, we will report on the progress of experiments with a new type of surface combining superhydrophobic surfaces like those discussed above with Slippery Liquid Infused Porous Surfaces (SLIPS), which utilize an oil layer to create a hydrophobic self-repairing surface. These ``Super-SLIPS'' may combine the best properties of both superhydrophobic surfaces and SLIPS, by combining a drag reducing air-layer and an oil layer which may improve durability and biofouling resistance. This research was supported by the ORNL Seed Money Program. Oak Ridge National Laboratory is managed by UT-Battelle, LLC, for the U.S. Dept. of Energy under contract DE-AC05-00OR22725.

[Evaluation of Educational Effect of Problem-Posing System in Nursing Processing Study].

PubMed

Tsuji, Keiko; Takano, Yasuomi; Yamakawa, Hiroto; Kaneko, Daisuke; Takai, Kiyako; Kodama, Hiromi; Hagiwara, Tomoko; Komatsugawa, Hiroshi

2015-09-01

The nursing processing study is generally difficult, because it is important for nursing college students to understand knowledge and utilize it. We have developed an integrated system to understand, utilize, and share knowledge. We added a problem-posing function to this system, and expected that students would deeply understand the nursing processing study through the new system. This system consisted of four steps: create a problem, create an answer input section, create a hint, and verification. Nursing students created problems related to nursing processing by this system. When we gave a lecture on the nursing processing for second year students of A university, we tried to use the creating problem function of this system. We evaluated the effect by the number of problems and the contents of the created problem, that is, whether the contents consisted of a lecture stage or not. We also evaluated the correlation between those and regular examination and report scores. We derived the following: 1. weak correlation between the number of created problems and report score (r=0.27), 2. significant differences between regular examination and report scores of students who created problems corresponding to the learning stage, and those of students who created problems not corresponding to it (P<0.05). From these results, problem-posing is suggested to be effective to fix and utilize knowledge in the lecture of nursing processing theory.

A Computer-Assisted Instruction Program on How To Use a Library Card Catalog: Description, Program, and Evaluation.

ERIC Educational Resources Information Center

Wood, Richard J.

The computer program described is written in BASIC and, although it was developed for use at Slippery Rock State College, it could be adapted easily for other libraries using Library of Congress classification and cataloging rules. The program uses simple sequences of instructions and explanations followed by questions. Branching is employed to…

A Slippery Slope: Children's Perceptions of Their Role in Environmental Preservation in the Peruvian Amazon

ERIC Educational Resources Information Center

Galeano, Rebecca

2013-01-01

Despite international attention and attempts to preserve the environmental diversity of the Amazon, it is an accepted fact that those who inhabit the forest must be the ones who preserve it. This article presents an analysis of how children in small rural riverine communities along the Amazon understand the importance of environmental preservation…

"Get Up and Play!" From Simulation to Imitation in Digital Games

ERIC Educational Resources Information Center

Jenson, Jennifer; De Castell, Suzanne

2008-01-01

As professors working in faculties of education for the past ten years researching digital gameplay and the design and development of games for education, the authors have often been asked whether digital games are good or bad for children. The discourse of good/bad is a slippery one and the authors believe that digital games, like television,…

A slide down a slippery slope: ethical guidelines in the dissemination of computer-based presentations

Treesearch

Patrick C. Tobin; James L. Frazier

2009-01-01

The continual development of technology opens many new and exciting doors in all walks of life, including science. Undoubtedly, we all have benefited from the ability to rapidly disseminate and acquire scientific information. Published articles can be downloaded from the Internet even prior to their "actual" publication date, requests for pdf reprints of...

Assessing the Educational Opportunities from a Solar Powered Cultivator at Slippery Rock University of Pennsylvania

ERIC Educational Resources Information Center

Borsari, Bruno; Elder, Timothy; Reynolds, Thomas

2004-01-01

The need to develop alternatives for fossil fuel energy consumption is mandated by the limit of world oil reserves and the environmental costs associated with their continued use. The purpose of this study was to demonstrate to local farmers the environmental benefits provided by a modified farm implement and to enhance interest in alternative…

Another Look at Plagiarism in the Digital Age: Is It Time to Turn in My Badge?

ERIC Educational Resources Information Center

Colvin, Benie B.

2007-01-01

In this article, the author talks about plagiarism in the digital age and how plagiarism challenges teachers in their relationship with students. With a growing body of digital commentary and the looming dominance of electronic writing, current professional consensus in the plagiarism dilemma appears dubious and the slope gets more slippery every…

The Divine and Artistic Ideal: Ideas and Insights for Cross-Cultural Aesthetic Education

ERIC Educational Resources Information Center

Gu, Ming Dong

2008-01-01

Art has been related to the divine across cultures. In most traditions, the divine has been viewed as the ultimate aesthetic ideal, and aesthetics is full of notions, ideas, and concepts related to it without which artistic criticism and aesthetic education would be in a much impoverished state. The divine in art, however, is a slippery category.…

High-School Class Rank, a Slippery Metric, Loses Its Appeal for Colleges

ERIC Educational Resources Information Center

Hoover, Eric

2012-01-01

Among the traditional measures of student quality, class rank is widely described by admissions officers as the fuzziest. That is why some colleges no longer use it in their evaluations of applicants, while many others do not consider it very important. The measure once had greater appeal. For one thing, it had the whiff of fairness. Seeing how an…

Fort Scott Lake Cultural Resource Study. Part 1. Archaeological and Geomorphological Inventory and Evaluation at the Proposed Fort Scott Lake Project, Southeast Kansas

DTIC Science & Technology

1989-01-01

elm (Ulmus americana). Other common components of the forest are winged elm (Ulmus alata), sycamore (Platanus occidentalis), and butternut hickory...large Woodland assemblage from the Slippery Rock site (14BO26) and site 14BO3 (Bradley and Harder 1974) was interpreted by the original investigators

Elm diseases

Treesearch

John W. Peacock

1989-01-01

Dutch elm disease was found in Cleveland, Ohio, in 1930, and is now in most of the contiguous 48 states. The disease is caused by a fungus that has killed millions of wild and planted elms. Losses have been the greatest in the eastern United States. The fungus attacks all elms, but our native species, American, slippery, and rock elm have little or no resistance to the...

An Examination of Preservice Teachers' View of Multiliteracies: Habits, Perceptions, Demographics and Slippery Slopes

ERIC Educational Resources Information Center

Al-Hazza, Tami Craft; Lucking, Robert

2017-01-01

This research study examined the values and perceptions of prospective teachers relative to a series of issues in what has become known as the New Literacies, the way youngsters read, seek information, and react to it through use of new technologies. The findings of this research reveal significant differences between female and male prospective…

Policies and Practices on a Slippery Terrain: Lessons from Latin America and Africa in Educational Gender Equity.

ERIC Educational Resources Information Center

Stromquist, Nelly P.

This paper compares and contrasts educational and gender experiences in Latin America and Africa. It provides a brief background for each area and addresses some commonly recognized issues, such as access to schooling and dropping out. The article discusses educational policies and examines some less-commonly recognized issues in higher education,…

Slippery and never wet

NASA Astrophysics Data System (ADS)

Backholm, Matilda; Timonen, Jaakko V. I.; Ras, Robin H. A.

2017-11-01

Superhydrophobic surfaces let water droplets roll off with low friction and falling droplets rebound, leaving the surfaces completely dry. Such extremely water repellent surfaces are found in nature on lotus leaves, the legs of water striders and feather coatings of birds, and portray a beautiful example of ingenious biological design. They provide an exciting research avenue for physicists and materials scientists aspiring to understand and mimic nature.

The Slippery Slope of Air Force Downsizing: A Strategy Connection

DTIC Science & Technology

2013-02-14

as the reductions continue. As an example, commanders and their Airmen are responsible for being administration, personnel, finance, communciations ... computer efficient because the expertise in their units or base has been reduced, eliminated or consolidated. This impacts the time and resources...are the areas that require additional research. • Issue: Other functional issues (Logistics, Finance, Contracting, Communications/ computers , Nuclear

Beyond Socioeconomic Status: The Impact of Principal Leadership in Urban and High-Poverty Turnaround Schools

ERIC Educational Resources Information Center

Adejumo, Mojisola

2017-01-01

The quest to transform failing urban and high-poverty schools in America has been a slippery uphill battle since the banner of war was raised against the many schools serving impoverished children. As battle rages, a few are schools leading their students, teachers, parents, and community to victory by turning their once-failing schools into…

Recovery of metals from waste printed circuit boards by a mechanical method using a water medium.

PubMed

Duan, Chenlong; Wen, Xuefeng; Shi, Changsheng; Zhao, Yuemin; Wen, Baofeng; He, Yaqun

2009-07-15

Research on the recycling of waste printed circuit boards (PCB) is at the forefront of environmental pollution prevention and resource recycling. To effectively crush waste PCB and to solve the problem of secondary pollution from fugitive odors and dust created during the crushing process, a wet impacting crusher was employed to achieve comminution liberation of the PCB in a water medium. The function of water in the crushing process was analyzed. When using slippery hammerheads, a rotation speed of 1470 rpm, a water flow of 6m(3)/h and a sieve plate aperture of 2.2mm, 95.87% of the crushed product was sized less than 1mm. 94.30% of the metal was in this grade of product. Using smashed material graded -1mm for further research, a Falcon concentrator was used to recover the metal from the waste PCB. Engineering considerations were the liberation degree, the distribution ratio of the metal and a way to simplify the technology. The separation mechanism for fine particles of different densities in a Falcon concentrator was analyzed in detail and the separation process in the segregation and separation zones was deduced. Also, the magnitude of centrifugal acceleration, the back flow water pressure and the feed slurry concentration, any of which might affect separation results, were studied. A recovery model was established using Design-Expert software. Separating waste PCB, crushed to -1mm, with the Falcon separator gave a concentrated product graded 92.36% metal with a recovery of 97.05%. To do this the reverse water pressure was 0.05 MPa, the speed transducer frequency was set at 30 Hz and the feed density was 20 g/l. A flow diagram illustrating the new technique of wet impact crushing followed by separation with a Falcon concentrator is provided. The technique will prevent environmental pollution from waste PCB and allow the effective recovery of resources. Water was used as the medium throughout the whole process.

How to catch more prey with less effective traps: explaining the evolution of temporarily inactive traps in carnivorous pitcher plants.

PubMed

Bauer, Ulrike; Federle, Walter; Seidel, Hannes; Grafe, T Ulmar; Ioannou, Christos C

2015-02-22

Carnivorous Nepenthes pitcher plants capture arthropods with specialized slippery surfaces. The key trapping surface, the pitcher rim (peristome), is highly slippery when wetted by rain, nectar or condensation, but not when dry. As natural selection should favour adaptations that maximize prey intake, the evolution of temporarily inactive traps seems paradoxical. Here, we show that intermittent trap deactivation promotes 'batch captures' of ants. Prey surveys revealed that N. rafflesiana pitchers sporadically capture large numbers of ants from the same species. Continuous experimental wetting of the peristome increased the number of non-recruiting prey, but decreased the number of captured ants and shifted their trapping mode from batch to individual capture events. Ant recruitment was also lower to continuously wetted pitchers. Our experimental data fit a simple model that predicts that intermittent, wetness-based trap activation should allow safe access for 'scout' ants under dry conditions, thereby promoting recruitment and ultimately higher prey numbers. The peristome trapping mechanism may therefore represent an adaptation for capturing ants. The relatively rare batch capture events may particularly benefit larger plants with many pitchers. This explains why young plants of many Nepenthes species additionally employ wetness-independent, waxy trapping surfaces.

Oil-Impregnated Polyethylene Films

NASA Astrophysics Data System (ADS)

Mukherjee, Ranit; Habibi, Mohammad; Rashed, Ziad; Berbert, Otacilio; Shi, Shawn; Boreyko, Jonathan

2017-11-01

Slippery liquid-infused porous surfaces (SLIPS) minimize the contact angle hysteresis of a wide range of liquids and aqueous food products. Although hydrophobic polymers are often used as the porous substrate for SLIPS, the choice of polymer has been limited to silicone-based or fluorine-based materials. Hydrocarbon-based polymers, such as polyethylene, are cost effective and widely used in food packaging applications where SLIPS would be highly desirable. However, to date there have been no reports on using polyethylene as a SLIPS substrate, as it is considered highly impermeable. Here, we show that thin films of low-density polyethylene can be stably impregnated with carbon-based oils without requiring any surface modification. Wicking tests reveal that oils with sufficient chemical compatibility follow Washburn's equation. The nanometric effective pore size of the polyethylene does result in a very low wicking speed, but by using micro-thin films and a drawdown coater, impregnation can still be completed in under one second. The oil-impregnated polyethylene films promoted ultra-slippery behavior for water, ketchup, and yogurt while remaining durable even after being submerged in ketchup for over one month. This work was supported by Bemis North America (AT-23981).

Molecular dimensions and surface diffusion assisted mechanically robust slippery perfluoropolyether impregnated mesoporous alumina interfaces

NASA Astrophysics Data System (ADS)

Rowthu, Sriharitha; Balic, Edin E.; Hoffmann, Patrik

2017-12-01

Accomplishing mechanically robust omniphobic surfaces is a long-existing challenge, and can potentially find applications in bioengineering, tribology and paint industries. Slippery liquid impregnated mesoporous α-Al2O3 interfaces are achieved with water, alkanes, water based and oil based high viscosity acrylic paints. Incredibly high abrasion-resistance (wear coefficients ≤10-8 mm3 N-1 m-1) and ultra-low friction coefficients (≥0.025) are attained, attributing to the hard alumina matrix and continuous replenishment of perfluoropolyether aided by capillarity and surface diffusion processes. A variety of impregnating liquids employed suggest that large molecules, faster surface diffusion and lowest evaporation rate generate the rare combination of high wear-resistance and omniphobicity. It is noteworthy that these novel liquid impregnated Al2O3 composites exhibit outstanding load bearing capacity up to 350 MPa; three orders of magnitude higher than achievable by the state of the art omniphobic surfaces. Further, our developed thermodynamic calculations suggest that the relative thermodynamic stability of liquid impregnated composites is linearly proportional to the spreading coefficient (S) of the impregnating liquid with the matrix material and is an important tool for the selection of an appropriate matrix material for a given liquid.

Superhydrophobic and Slippery Lubricant-Infused Flexible Transparent Nanocellulose Films by Photoinduced Thiol-Ene Functionalization.

PubMed

Guo, Jiaqi; Fang, Wenwen; Welle, Alexander; Feng, Wenqian; Filpponen, Ilari; Rojas, Orlando J; Levkin, Pavel A

2016-12-14

Films comprising nanofibrillated cellulose (NFC) are suitable substrates for flexible devices in analytical, sensor, diagnostic, and display technologies. However, some major challenges in such developments include their high moisture sensitivity and the complexity of current methods available for functionalization and patterning. In this work, we present a facile process for tailoring the surface wettability and functionality of NFC films by a fast and versatile approach. First, the NFC films were coated with a layer of reactive nanoporous silicone nanofilament by polycondensation of trichlorovinylsilane (TCVS). The TCVS afforded reactive vinyl groups, thereby enabling simple UV-induced functionalization of NFC films with various thiol-containing molecules via the photo "click" thiol-ene reaction. Modification with perfluoroalkyl thiols resulted in robust superhydrophobic surfaces, which could then be further transformed into transparent slippery lubricant-infused NFC films that displayed repellency against both aqueous and organic liquids with surface tensions as low as 18 mN·m -1 . Finally, transparent and flexible NFC films incorporated hydrophilic micropatterns by modification with OH, NH 2 , or COOH surface groups, enabling space-resolved superhydrophobic-hydrophilic domains. Flexibility, transparency, patternability, and perfect superhydrophobicity of the produced nanocellulose substrates warrants their application in biosensing, display protection, and biomedical and diagnostics devices.

3D Imaging of Water-Drop Condensation on Hydrophobic and Hydrophilic Lubricant-Impregnated Surfaces

NASA Astrophysics Data System (ADS)

Kajiya, Tadashi; Schellenberger, Frank; Papadopoulos, Periklis; Vollmer, Doris; Butt, Hans-Jürgen

2016-04-01

Condensation of water from the atmosphere on a solid surface is an ubiquitous phenomenon in nature and has diverse technological applications, e.g. in heat and mass transfer. We investigated the condensation kinetics of water drops on a lubricant-impregnated surface, i.e., a micropillar array impregnated with a non-volatile ionic liquid. Growing and coalescing drops were imaged in 3D using a laser scanning confocal microscope equipped with a temperature and humidity control. Different stages of condensation can be discriminated. On a lubricant-impregnated hydrophobic micropillar array these are: (1) Nucleation on the lubricant surface. (2) Regular alignment of water drops between micropillars and formation of a three-phase contact line on a bottom of the substrate. (3) Deformation and bridging by coalescence which eventually leads to a detachment of the drops from the bottom substrate. The drop-substrate contact does not result in breakdown of the slippery behaviour. Contrary, on a lubricant-impregnated hydrophilic micropillar array, the condensed water drops replace the lubricant. Consequently, the surface loses its slippery property. Our results demonstrate that a Wenzel-like to Cassie transition, required to maintain the facile removal of condensed water drops, can be induced by well-chosen surface hydrophobicity.

3D Imaging of Water-Drop Condensation on Hydrophobic and Hydrophilic Lubricant-Impregnated Surfaces.

PubMed

Kajiya, Tadashi; Schellenberger, Frank; Papadopoulos, Periklis; Vollmer, Doris; Butt, Hans-Jürgen

2016-04-04

Condensation of water from the atmosphere on a solid surface is an ubiquitous phenomenon in nature and has diverse technological applications, e.g. in heat and mass transfer. We investigated the condensation kinetics of water drops on a lubricant-impregnated surface, i.e., a micropillar array impregnated with a non-volatile ionic liquid. Growing and coalescing drops were imaged in 3D using a laser scanning confocal microscope equipped with a temperature and humidity control. Different stages of condensation can be discriminated. On a lubricant-impregnated hydrophobic micropillar array these are: (1) Nucleation on the lubricant surface. (2) Regular alignment of water drops between micropillars and formation of a three-phase contact line on a bottom of the substrate. (3) Deformation and bridging by coalescence which eventually leads to a detachment of the drops from the bottom substrate. The drop-substrate contact does not result in breakdown of the slippery behaviour. Contrary, on a lubricant-impregnated hydrophilic micropillar array, the condensed water drops replace the lubricant. Consequently, the surface loses its slippery property. Our results demonstrate that a Wenzel-like to Cassie transition, required to maintain the facile removal of condensed water drops, can be induced by well-chosen surface hydrophobicity.

The slippery slope from contraception to euthanasia.

PubMed

Kippley, J F

1978-01-01

The key element in natural family planning that keeps it from being the 1st to abortion is the emphasis on natural. A purely secular form of noncontraceptive birth control fails to avoid being the 1st step down the slippery slope toward abortion and then euthanasia. It is felt that the fundamental difference is in what is absolutized. The Western culture has absolutized family planning, thus, when people think that their right to plan the size of their family is an absolute right, and things do not go according to plans, they pursue their absolutized plans even if it means invading some other person's right to life. As Malcom Muggeridge has pointed out, as soon as a culture accepts the killing of the defenseless and innocent, the principle has been established for killing anyone who is socially inconvenient. However, when doing things according to God's laws, all individual plans are made relative. We do not attempt test-tube techniques and we do not resort to abortion or to sterilization. Some will reject the inherently religious overtones of the full meaning of natural (defined as acting in accord with the nature God has given each person), but at least, they have been given something to think about.

Help Kids Stay Safe on the Playground | DoDLive

Science.gov Websites

. One day, as I zoomed past another kid on this imaginary rink, I lost my balance, hit the ice face -first and shot like a hockey puck across its slippery surface before slamming into a chain link fence one else knows I have a fake front tooth, but I am reminded every day of that playground injury many

Bioinspired Surface Treatments for Improved Decontamination: Silicate-Based Slippery Liquid-Infused Porous Surfaces (SLIPS)

DTIC Science & Technology

2017-07-20

methyl salicylate, dimethyl methylphosphate, and diisopropyl fluorophosphates following treatment of contaminated surfaces with a soapy water solution...and diisopropyl fluorophosphate following treatment of contaminated surfaces with a soapy water solution is reported along with droplet diffusion on...SURFACES (SLIPS) INTRODUCTION The DoD Chemical and Biological Defense Program (CBDP) seeks to provide protection of forces in a contaminated

GREAT I Study of the Upper Mississippi River. Technical Appendixes. Volume 5. Fish and Wildlife.

DTIC Science & Technology

1980-09-01

Midwest , put into and State agencies have heritage. motion an object lesson in joined in partnership to government cooperation. take action toward...Slippery Elm Shrubs Cornus stolonifera Michx. Red Osier Dogwood Sambucus canadensis L. Elderberry Xanthoxylum americanum Mill. Prickly Ash...Toxicodendron radicans (L.) Kuntze. Poison Ivy Vines Menispermum canadense L. Moonseed Parthenocissus guincquifolia (L.) Planch. Virginia Creeper Parthenocissus

Environmental Assessment for Tinker Aerospace Complex Tinker Air Force Base, Oklahoma

DTIC Science & Technology

2008-05-01

Boutelova curtipendula silver bluestem Andropogon saccharoides slippery elm Ulmus rubra sugarberry Celtis laevigata switchgrass...areas; Crutcho Creek, Elm Creek, and Hog Creek. The Crutcho Creek drainage area consists of two additional water bodies, Kulhman Creek and Solider...Crutcho Creek flows to the north and discharges into the North Canadian River; the North Canadian River then discharges into the Arkansas River. Elm

Monitoring nontimber forest products using forest inventory data: an example with slippery elm bark

Treesearch

Jobriath S. Kauffman; Stephen P. Prisley; James L. Chamberlain

2015-01-01

The USDA Forest Service Forest Inventory and Analysi (FIA) program collects data on a wealth of variables related to trees in forests. Some of these trees produce nontimber forest products (NTFPs) (e.g., fruit, bark and sap) that are harvested for culinary, decorative, building, and medicinal purposes. At least 11 tree species inventoried by FIA are valued for their...

NATO Reference Mobility. Edition I. Users Guide. Volume 2

DTIC Science & Technology

1979-10-01

2. Weather, which affects soil slipperiness and driving visibility, (including dry snow over frozen ground and associated conditions). 3. Several...CU4LF(2l CGX1—lEUUILFU» ♦ ELm »*EOUiLF(2>*6LL(2JI/CGf£l ’:GFZ2--EQUILF(3*-HTCHFZ CUX2»*J. IF«N!USP .GE. Jl CGXJ—EQUILFO MELLUl/CCfZi CGFZ(n

Terrestrial Biological Inventory Hartwell Drainage and Levee District Greene County, Illinois.

DTIC Science & Technology

1982-01-01

Office) IS. SECURITY CLASS. (of this rePOrt) ISa. DECLASSIFICATION/DOWNGRADING SCHEDULE Ś. DISTRIBUTION STATEMENT (of oile R po) Approved for release...trees are less than 25 cm dbh; cottonwood, pin oak. Understory - 65% cover. Hackberry, flowering dogwood, smooth sumac, poison ivy, trumpet creeper...30% cover; slippery elm, smooth sumac, hackberry, hawthorn, flowering dogwood. Groundcover - 40% cover; violet, white avens, heal-all, wheat

Understanding and Observing Subglacial Friction Using Seismology

NASA Astrophysics Data System (ADS)

Tsai, V. C.

2017-12-01

Glaciology began with a focus on understanding basic mechanical processes and producing physical models that could explain the principal observations. Recently, however, more attention has been paid to the wealth of recent observations, with many modeling efforts relying on data assimilation and empirical scalings, rather than being based on first-principles physics. Notably, ice sheet models commonly assume that subglacial friction is characterized by a "slipperiness" coefficient that is determined by inverting surface velocity observations. Predictions are usually then made by assuming these slipperiness coefficients are spatially and temporally fixed. However, this is only valid if slipperiness is an unchanging material property of the bed and, despite decades of work on subglacial friction, it has remained unclear how to best account for such subglacial physics in ice sheet models. Here, we describe how basic seismological concepts and observations can be used to improve our understanding and determination of subglacial friction. First, we discuss how standard models of granular friction can and should be used in basal friction laws for marine ice sheets, where very low effective pressures exist. We show that under realistic West Antarctic Ice Sheet conditions, standard Coulomb friction should apply in a relatively narrow zone near the grounding line and that this should transition abruptly as one moves inland to a different, perhaps Weertman-style, dependence of subglacial stress on velocity. We show that this subglacial friction law predicts significantly different ice sheet behavior even as compared with other friction laws that include effective pressure. Secondly, we explain how seismological observations of water flow noise and basal icequakes constrain subglacial physics in important ways. Seismically observed water flow noise can provide constraints on water pressures and channel sizes and geometry, leading to important data on subglacial friction. Basal icequake mechanisms also provide unique constraints on subglacial stress state as well as variations in water pressures. Together, the use of standard seismological concepts and new observations thus promises to provide new constraints on subglacial mechanics and focus attention back on the basic physical processes involved.

Analyses of frameshifting at UUU-pyrimidine sites.

PubMed

Schwartz, R; Curran, J F

1997-05-15

Others have recently shown that the UUU phenylalanine codon is highly frameshift-prone in the 3'(rightward) direction at pyrimidine 3'contexts. Here, several approaches are used to analyze frameshifting at such sites. The four permutations of the UUU/C (phenylalanine) and CGG/U (arginine) codon pairs were examined because they vary greatly in their expected frameshifting tendencies. Furthermore, these synonymous sites allow direct tests of the idea that codon usage can control frameshifting. Frameshifting was measured for these dicodons embedded within each of two broader contexts: the Escherichia coli prfB (RF2 gene) programmed frameshift site and a 'normal' message site. The principal difference between these contexts is that the programmed frameshift contains a purine-rich sequence upstream of the slippery site that can base pair with the 3'end of 16 S rRNA (the anti-Shine-Dalgarno) to enhance frameshifting. In both contexts frameshift frequencies are highest if the slippery tRNAPhe is capable of stable base pairing in the shifted reading frame. This requirement is less stringent in the RF2 context, as if the Shine-Dalgarno interaction can help stabilize a quasi-stable rephased tRNA:message complex. It was previously shown that frameshifting in RF2 occurs more frequently if the codon 3'to the slippery site is read by a rare tRNA. Consistent with that earlier work, in the RF2 context frameshifting occurs substantially more frequently if the arginine codon is CGG, which is read by a rare tRNA. In contrast, in the 'normal' context frameshifting is only slightly greater at CGG than at CGU. It is suggested that the Shine-Dalgarno-like interaction elevates frameshifting specifically during the pause prior to translation of the second codon, which makes frameshifting exquisitely sensitive to the rate of translation of that codon. In both contexts frameshifting increases in a mutant strain that fails to modify tRNA base A37, which is 3'of the anticodon. Thus, those base modifications may limit frameshifting at UUU codons. Finally, statistical analyses show that UUU Ynn dicodons are extremely rare in E.coli genes that have highly biased codon usage.

Analyses of frameshifting at UUU-pyrimidine sites.

PubMed Central

Schwartz, R; Curran, J F

1997-01-01

Others have recently shown that the UUU phenylalanine codon is highly frameshift-prone in the 3'(rightward) direction at pyrimidine 3'contexts. Here, several approaches are used to analyze frameshifting at such sites. The four permutations of the UUU/C (phenylalanine) and CGG/U (arginine) codon pairs were examined because they vary greatly in their expected frameshifting tendencies. Furthermore, these synonymous sites allow direct tests of the idea that codon usage can control frameshifting. Frameshifting was measured for these dicodons embedded within each of two broader contexts: the Escherichia coli prfB (RF2 gene) programmed frameshift site and a 'normal' message site. The principal difference between these contexts is that the programmed frameshift contains a purine-rich sequence upstream of the slippery site that can base pair with the 3'end of 16 S rRNA (the anti-Shine-Dalgarno) to enhance frameshifting. In both contexts frameshift frequencies are highest if the slippery tRNAPhe is capable of stable base pairing in the shifted reading frame. This requirement is less stringent in the RF2 context, as if the Shine-Dalgarno interaction can help stabilize a quasi-stable rephased tRNA:message complex. It was previously shown that frameshifting in RF2 occurs more frequently if the codon 3'to the slippery site is read by a rare tRNA. Consistent with that earlier work, in the RF2 context frameshifting occurs substantially more frequently if the arginine codon is CGG, which is read by a rare tRNA. In contrast, in the 'normal' context frameshifting is only slightly greater at CGG than at CGU. It is suggested that the Shine-Dalgarno-like interaction elevates frameshifting specifically during the pause prior to translation of the second codon, which makes frameshifting exquisitely sensitive to the rate of translation of that codon. In both contexts frameshifting increases in a mutant strain that fails to modify tRNA base A37, which is 3'of the anticodon. Thus, those base modifications may limit frameshifting at UUU codons. Finally, statistical analyses show that UUU Ynn dicodons are extremely rare in E.coli genes that have highly biased codon usage. PMID:9115369

Slip resistant properties of footwear on ice.

PubMed

Gao, Chuansi; Abeysekera, John; Hirvonen, Mikko; Grönqvist, Raoul

2004-05-15

Current research on slipperiness of footwear has mainly focused on floors and lubricated floors. Slips and falls on icy and snowy surfaces involve not only outdoor workers, but also pedestrians and the general public; and occur in cold regions and in winter season in many parts of the world. However, in comparison with the size of the problem, research on slips and falls on icy and snowy surfaces has been scarce. The objective of this paper is to explore the slip resistant properties of footwear (soling materials, roughness and hardness) on ice. The coefficients of kinetic friction of four different soling materials (synthetic rubber, nitrile rubber, natural rubber and polyurethane) were measured on ice (-12 degrees C). The outsole roughness and hardness were also measured. Results showed that the polyurethane soling did not perform better than synthetic rubber, nitrile rubber and natural rubber on pure hard ice (-12 degrees C). Soling roughness was positively correlated with the coefficient of kinetic friction. The most slip resistant soling material (polyurethane) on floors and lubricated floors may not provide sufficient slip resistance on ice.

Playing God and the intrinsic value of life: moral problems for synthetic biology?

PubMed

Link, Hans-Jürgen

2013-06-01

Most of the reports on synthetic biology include not only familiar topics like biosafety and biosecurity but also a chapter on 'ethical concerns'; a variety of diffuse topics that are interrelated in some way or another. This article deals with these 'ethical concerns'. In particular it addresses issues such as the intrinsic value of life and how to deal with 'artificial life', and the fear that synthetic biologists are tampering with nature or playing God. Its aim is to analyse what exactly is the nature of the concerns and what rationale may lie behind them. The analysis concludes that the above-mentioned worries do not give genuine cause for serious concern. In the best possible way they are interpreted as slippery slope arguments, yet arguments of this type need to be handled with care. It is argued that although we are urged to be especially vigilant we do not have sufficiently cogent reasons to assume that synthetic biology will cause such fundamental hazards as to warrant restricting or refraining from research in this field.

The antilock braking system anomaly: a drinking driver problem?

PubMed

Harless, David W; Hoffer, George E

2002-05-01

Antilock braking systems (ABS) have held promise for reducing the incidence of accidents because they reduce stopping times on slippery surfaces and allow drivers to maintain steering control during emergency braking. Farmer et al. (Accident Anal. Prevent. 29 (1997) 745) provide evidence that antilock brakes are beneficial to nonoccupants: a set of 1992 model General Motors vehicles equipped with antilock brakes were involved in significantly fewer fatal crashes in which occupants of other vehicles, pedestrians, or bicyclists were killed. But, perversely, the risk of death for occupants of vehicles equipped with antilock brakes increased significantly after adoption. Farmer (Accident Anal. Prevent. 33 (2001) 361) updates the analysis for 1996- 1998 and finds a significant attenuation in the ABS anomaly. Researchers have put forward two hypotheses to explain this antilock brake anomaly: risk compensation and improper operation of antilock brake-equipped vehicles. We provide strong evidence for the improper operation hypothesis by showing that the antilock brake anomaly is confined largely to drinking drivers. Further, we show that the attenuation phenomenon occurs consistently after the first three to four years of vehicle service.

Vision-guided micromanipulation system for biomedical application

NASA Astrophysics Data System (ADS)

Shim, Jae-Hong; Cho, Sung-Yong; Cha, Dong-Hyuk

2004-10-01

In these days, various researches for biomedical application of robots have been carried out. Particularly, robotic manipulation of the biological cells has been studied by many researchers. Usually, most of the biological cell's shape is sphere. Commercial biological manipulation systems have been utilized the 2-Dimensional images through the optical microscopes only. Moreover, manipulation of the biological cells mainly depends on the subjective viewpoint of an operator. Due to these reasons, there exist lots of problems such as slippery and destruction of the cell membrane and damage of the pipette tip etc. In order to overcome the problems, we have proposed a vision-guided biological cell manipulation system. The newly proposed manipulation system makes use of vision and graphic techniques. Through the proposed procedures, an operator can inject the biological cell scientifically and objectively. Also, the proposed manipulation system can measure the contact force occurred at injection of a biological cell. It can be transmitted a measured force to the operator by the proposed haptic device. Consequently, the proposed manipulation system could safely handle the biological cells without any damage. This paper presents the introduction of our vision-guided manipulation techniques and the concept of the contact force sensing. Through a series of experiments the proposed vision-guided manipulation system shows the possibility of application for precision manipulation of the biological cell such as DNA.

Bioinspired Surface Treatments for Improved Decontamination: Polymer Based SlipperyLiquid Infused Porous Surfaces (SLIPS)

DTIC Science & Technology

2018-04-23

Naval Research Laboratory Washington, DC 20375-5320 NRL/MR/6930--18-9775 Bioinspired Surface Treatments for Improved Decontamination: Polyhedral...H. Moore Center for Bio/Molecular Science & Engineering Naval Research Laboratory 4555 Overlook Avenue, SW Washington, DC 20375-5344 NRL/MR/6930--18...treatment of contaminated surfaces with a soapy water solution is reported. Wetting behaviors and target droplet diffusion on the surfaces are also

Social Responsibility of a Profession: An Analysis of Faculty Perception of Social Responsibility Factors and Integration into Graduate Programs of Educational Technology

ERIC Educational Resources Information Center

Moore, Stephanie L.

2009-01-01

Although ethics are commonly regarded as an important characteristic and performance attribute, they are also regarded as a slippery or ill-defined topic leaving practitioners and faculty flat-footed in how to teach and assess ethics. This article reports part of the findings from an investigation on deriving an empirical definition of ethics,…

Laminar Flow in the Ocean Ekman Layer

NASA Astrophysics Data System (ADS)

Woods, J. T. H.

INTRODUCTION THE EFFECT OF A STABLE DENSITY GRADIENT THE FATAL FLAW FLOW VISUALIZATION THE DISCOVERY OF LAMINAR FLOW FINE STRUCTURE WAVE-INDUCED SHEAR INSTABILITY BILLOW TURBULENCE REVERSE TRANSITION REVISED PARADIGM ONE-DIMENSIONAL MODELLING OF THE UPPER OCEAN DIURNAL VARIATION BUOYANT CONVECTION BILLOW TURBULENCE IN THE DIURNAL THERMOCLINE CONSEQUENCES FOR THE EKMAN CURRENT PROFILE SOLAR RADIATION APPLICATIONS Slippery Seas of Acapulco Pollution Afternoon Effect in Sonar Patchiness Fisheries Climate DISCUSSION CONCLUSION REFERENCES

Endangered Species Management Plan for Fort Hood, Texas: FY06-10

DTIC Science & Technology

2007-05-01

Texas red oak, post oak, Texas ash (Fraxinus texensis), shin oak, blackjack oak (Quercus marilandica), slippery elm (Ulmus rubra), cedar elm ...by Ashe juniper and Texas oak. Other important tree species included live oak, cedar elm (Ulmus crassifolia), Lacey oak (Quercus laceyi), Arizona...0.83 m (Cimprich 2005). Nest substrates include shin oak, Texas red oak, Texas redbud, Ashe juniper, Texas ash, Plateau live oak, cedar elm , rusty

Archeology and Native American Religion at the Leon River Medicine Wheel.

DTIC Science & Technology

1996-02-01

varieties of plants. The eastern side of including pecan (Carya illinoinensis), slippery elm the facility (East Range) is typified by dense (Ulmus rubra...southern part of the Cross Timbers and Prairies texana), and cedar elm (Ulmus crassifolia). A Vegetation Area. Alired and Mitchell (1955) term variety of...south (West Fort americana), American elm (Ulmus americana), Hood) are generally more open, ranging from TRC MARIAH ASSOCIATES, INC. (662-21

Phenology of slippery bark and common foliar diseases

Treesearch

Kevin T. Smith

2013-01-01

As mud season gives way to spring in New England, the pace of plant development quickens. We see that from the visual cues of plant phenology, the sequence and timing of biological events. The big early season events are upon us as the maple sap has run, buds swell, bud dormancy breaks, and leaves and flowers emerge. This is a good time for arborists to dust off their...

29 CFR Appendix V to Part 1918 - Basic Elements of a First Aid Training Program (Non-mandatory)

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Repairs .62(h)(4) Safe Working Load .62(h)(1) Shortened .62(h)(6) Chutes .63(a), (b), (c), (d) Clamps...) Certification .11 Coaming Rollers .52(e) Falls .52(c) Heel Blocks .52(d) Preventers .52(a), .54(d) Safe Working...)). Shackles: Safe Working Loads .62(i)(1) Used Aloft .62(i)(2) Other Decks .34 Slippery Conditions .91(b...

Plant surfaces with cuticular folds are slippery for beetles

PubMed Central

Prüm, Bettina; Seidel, Robin; Bohn, Holger Florian; Speck, Thomas

2012-01-01

Plant surfaces covered with three-dimensional (3D) waxes are known to strongly reduce insect adhesion, leading to slippery surfaces. Besides 3D epicuticular waxes, cuticular folds are a common microstructure found on plant surfaces, which have not been quantitatively investigated with regard to their influence on insect adhesion. We performed traction experiments with Colorado potato beetles on five plant surfaces with cuticular folds of different magnitude. For comparison, we also tested (i) smooth plant surfaces and (ii) plant surfaces possessing 3D epicuticular waxes. Traction forces on surfaces with medium cuticular folds, of about 0.5 µm in both height and thickness and a spacing of 0.5–1.5 µm, were reduced by an average of 88 per cent in comparison to smooth plant surfaces. Traction forces were reduced by the same order of magnitude as on plant surfaces covered with 3D epicuticular waxes. For surface characterization, we performed static contact angle measurements, which proved a strong effect of cuticular folds also on surface wettability. Surfaces possessing cuticular folds of greater magnitude showed higher contact angles up to superhydrophobicity. We hypothesize that cuticular folds reduce insect adhesion mainly due to a critical roughness, reducing the real contact area between the surface and the insect's adhesive devices. PMID:21642366

3D Imaging of Water-Drop Condensation on Hydrophobic and Hydrophilic Lubricant-Impregnated Surfaces

PubMed Central

Kajiya, Tadashi; Schellenberger, Frank; Papadopoulos, Periklis; Vollmer, Doris; Butt, Hans-Jürgen

2016-01-01

Condensation of water from the atmosphere on a solid surface is an ubiquitous phenomenon in nature and has diverse technological applications, e.g. in heat and mass transfer. We investigated the condensation kinetics of water drops on a lubricant-impregnated surface, i.e., a micropillar array impregnated with a non-volatile ionic liquid. Growing and coalescing drops were imaged in 3D using a laser scanning confocal microscope equipped with a temperature and humidity control. Different stages of condensation can be discriminated. On a lubricant-impregnated hydrophobic micropillar array these are: (1) Nucleation on the lubricant surface. (2) Regular alignment of water drops between micropillars and formation of a three-phase contact line on a bottom of the substrate. (3) Deformation and bridging by coalescence which eventually leads to a detachment of the drops from the bottom substrate. The drop-substrate contact does not result in breakdown of the slippery behaviour. Contrary, on a lubricant-impregnated hydrophilic micropillar array, the condensed water drops replace the lubricant. Consequently, the surface loses its slippery property. Our results demonstrate that a Wenzel-like to Cassie transition, required to maintain the facile removal of condensed water drops, can be induced by well-chosen surface hydrophobicity. PMID:27040483

Adaptations for insect-trapping in brood-site pollinated Colocasia (Araceae)

PubMed Central

Bröderbauer, D.; Ulrich, S.; Weber, A.

2016-01-01

The Araceae include both taxa with rewarding and deceptive trap pollination systems. Here we report on a genus in which rewarding and imprisonment of the pollinators co-occur. We studied the pollination of four species of Colocasia in Southwest China and investigated the morpho-anatomical adaptations of the spathe related to the attraction and capture of pollinators. All four species were pollinated by drosophilid flies of the genus Colocasiomyia. The flies are temporally arrested within the inflorescence and departure is only possible after pollen release. Trapping of the flies is accomplished by the closure of the spathe during anthesis. Moreover, in two species the spathe is covered with papillate epidermal cells known to form slippery surfaces in deceptive traps of Araceae. However, in Colocasia the papillae proved not slippery for the flies. The morpho-anatomical properties of the spathe epidermis indicate that it is an elaborate osmophore and serves for the emission of odours only. Despite its similarity to deceptive traps of other aroids, Colocasia and Colocasiomyia have a close symbiotic relationship, as the attracted flies use the inflorescence as a site for mating and breeding. The trap mechanism has presumably evolved independently in Colocasia and is supposed to facilitate more efficient pollen export. PMID:24119060

How to catch more prey with less effective traps: explaining the evolution of temporarily inactive traps in carnivorous pitcher plants

PubMed Central

Bauer, Ulrike; Federle, Walter; Seidel, Hannes; Grafe, T. Ulmar; Ioannou, Christos C.

2015-01-01

Carnivorous Nepenthes pitcher plants capture arthropods with specialized slippery surfaces. The key trapping surface, the pitcher rim (peristome), is highly slippery when wetted by rain, nectar or condensation, but not when dry. As natural selection should favour adaptations that maximize prey intake, the evolution of temporarily inactive traps seems paradoxical. Here, we show that intermittent trap deactivation promotes ‘batch captures' of ants. Prey surveys revealed that N. rafflesiana pitchers sporadically capture large numbers of ants from the same species. Continuous experimental wetting of the peristome increased the number of non-recruiting prey, but decreased the number of captured ants and shifted their trapping mode from batch to individual capture events. Ant recruitment was also lower to continuously wetted pitchers. Our experimental data fit a simple model that predicts that intermittent, wetness-based trap activation should allow safe access for ‘scout’ ants under dry conditions, thereby promoting recruitment and ultimately higher prey numbers. The peristome trapping mechanism may therefore represent an adaptation for capturing ants. The relatively rare batch capture events may particularly benefit larger plants with many pitchers. This explains why young plants of many Nepenthes species additionally employ wetness-independent, waxy trapping surfaces. PMID:25589604

Role of Winter Weather Conditions and Slipperiness on Tourists' Accidents in Finland.

PubMed

Lépy, Élise; Rantala, Sinikka; Huusko, Antti; Nieminen, Pentti; Hippi, Marjo; Rautio, Arja

2016-08-15

(1) BACKGROUND: In Finland, slippery snowy or icy ground surface conditions can be quite hazardous to human health during wintertime. We focused on the impacts of the variability in weather conditions on tourists' health via documented accidents during the winter season in the Sotkamo area. We attempted to estimate the slipping hazard in a specific context of space and time focusing on the weather and other possible parameters, responsible for fluctuations in the numbers of injuries/accidents; (2) METHODS: We used statistical distributions with graphical illustrations to examine the distribution of visits to Kainuu Hospital by non-local patients and their characteristics/causes; graphs to illustrate the distribution of the different characteristics of weather conditions; questionnaires and interviews conducted among health care and safety personnel in Sotkamo and Kuusamo; (3) RESULTS: There was a clear seasonal distribution in the numbers and types of extremity injuries of non-local patients. While the risk of slipping is emphasized, other factors leading to injuries are evaluated; and (4) CONCLUSIONS: The study highlighted the clear role of wintery weather conditions as a cause of extremity injuries even though other aspects must also be considered. Future scenarios, challenges and adaptive strategies are also discussed from the viewpoint of climate change.

Antioxidant effects of herbal therapies used by patients with inflammatory bowel disease: an in vitro study.

PubMed

Langmead, L; Dawson, C; Hawkins, C; Banna, N; Loo, S; Rampton, D S

2002-02-01

Herbal remedies used by patients for treatment of inflammatory bowel disease include slippery elm, fenugreek, devil's claw, Mexican yam, tormentil and wei tong ning, a traditional Chinese medicine. Reactive oxygen metabolites produced by inflamed colonic mucosa may be pathogenic. Aminosalicylates (5-ASA) are antioxidant and other such agents could be therapeutic. To assess the antioxidant effects of herbal remedies in cell-free oxidant-generating systems and inflamed human colorectal biopsies. Luminol-enhanced chemiluminescence in a xanthine/xanthine oxidase cell-free system was used to detect superoxide scavenging by herbs and 5-ASA, and fluorimetry to define peroxyl radical scavenging using a phycoerythrin degradation assay. Chemiluminescence was used to detect herbal effects on generation of oxygen radicals by mucosal biopsies from patients with active ulcerative colitis. Like 5-ASA, all herbs, except fenugreek, scavenged superoxide dose-dependently. All materials tested scavenged peroxyl dose-dependently. Oxygen radical release from biopsies was reduced after incubation in all herbs except Mexican yam, and by 5-ASA. All six herbal remedies have antioxidant effects. Fenugreek is not a superoxide scavenger, while Mexican yam did not inhibit radical generation by inflamed biopsies. Slippery elm, fenugreek, devil's claw, tormentil and wei tong ning merit formal evaluation as novel therapies in inflammatory bowel disease.

Role of Winter Weather Conditions and Slipperiness on Tourists’ Accidents in Finland

PubMed Central

Lépy, Élise; Rantala, Sinikka; Huusko, Antti; Nieminen, Pentti; Hippi, Marjo; Rautio, Arja

2016-01-01

(1) Background: In Finland, slippery snowy or icy ground surface conditions can be quite hazardous to human health during wintertime. We focused on the impacts of the variability in weather conditions on tourists’ health via documented accidents during the winter season in the Sotkamo area. We attempted to estimate the slipping hazard in a specific context of space and time focusing on the weather and other possible parameters, responsible for fluctuations in the numbers of injuries/accidents; (2) Methods: We used statistical distributions with graphical illustrations to examine the distribution of visits to Kainuu Hospital by non-local patients and their characteristics/causes; graphs to illustrate the distribution of the different characteristics of weather conditions; questionnaires and interviews conducted among health care and safety personnel in Sotkamo and Kuusamo; (3) Results: There was a clear seasonal distribution in the numbers and types of extremity injuries of non-local patients. While the risk of slipping is emphasized, other factors leading to injuries are evaluated; and (4) Conclusions: The study highlighted the clear role of wintery weather conditions as a cause of extremity injuries even though other aspects must also be considered. Future scenarios, challenges and adaptive strategies are also discussed from the viewpoint of climate change. PMID:27537899

Slippery Wave Functions

NASA Astrophysics Data System (ADS)

Kadanoff, Leo P.

2013-09-01

Superfluids and superconductors show a very surprising behavior at low temperatures. As their temperature is reduced, materials of both kinds can abruptly fall into a state in which they will support a persistent, essentially immortal, flow of particles. Unlike anything in classical physics, these flows produce neither friction nor resistance. A major accomplishment of Twentieth Century physics was the development of an understanding of this very surprising behavior via the construction of partially microscopic and partially macroscopic quantum theories of superfluid helium and superconducting metals. Such theories come in two parts: a theory of the motion of particle-like excitations, called quasiparticles, and of the persistent flows itself via a huge coherent excitation, called a condensate. Two people, above all others, were responsible for the construction of the quasiparticle side of the theories of these very special low-temperature behaviors: Lev Landau and John Bardeen. Curiously enough they both partially ignored and partially downplayed the importance of the condensate. In both cases, this neglect of the actual superfluid or superconducting flow interfered with their ability to understand the implications of the theory they had created. They then had difficulty assessing the important advances that occurred immediately after their own great work. Some speculations are offered about the source of this unevenness in the judgments of these two leading scientists.

Importance of Matching Physical Friction, Hardness, and Texture in Creating Realistic Haptic Virtual Surfaces.

PubMed

Culbertson, Heather; Kuchenbecker, Katherine J

2017-01-01

Interacting with physical objects through a tool elicits tactile and kinesthetic sensations that comprise your haptic impression of the object. These cues, however, are largely missing from interactions with virtual objects, yielding an unrealistic user experience. This article evaluates the realism of virtual surfaces rendered using haptic models constructed from data recorded during interactions with real surfaces. The models include three components: surface friction, tapping transients, and texture vibrations. We render the virtual surfaces on a SensAble Phantom Omni haptic interface augmented with a Tactile Labs Haptuator for vibration output. We conducted a human-subject study to assess the realism of these virtual surfaces and the importance of the three model components. Following a perceptual discrepancy paradigm, subjects compared each of 15 real surfaces to a full rendering of the same surface plus versions missing each model component. The realism improvement achieved by including friction, tapping, or texture in the rendering was found to directly relate to the intensity of the surface's property in that domain (slipperiness, hardness, or roughness). A subsequent analysis of forces and vibrations measured during interactions with virtual surfaces indicated that the Omni's inherent mechanical properties corrupted the user's haptic experience, decreasing realism of the virtual surface.

Companies and the customers who hate them.

PubMed

McGovern, Gail; Moon, Youngme

2007-06-01

Why do companies bind customers with contracts, bleed them with fees, and baffle them with fine print? Because bewildered customers, who often make bad purchasing decisions, can be highly profitable. Most firms that profit from customers' confusion are on a slippery slope. Over time, their customer-centric strategies for delivering value have evolved into company-centric strategies for extracting it. Not surprisingly, when a rival comes along with a friendlier alternative, customers defect. Adversarial value-extracting strategies are common in such industries as cell phone service, retail banking, and health clubs. Overly complex product and pricing options, for example, may have been designed to serve various segments. But in fact they take advantage of how difficult it is for customers to predict their needs (such as how many cell phone minutes they'll use each month) and make it hard for them to choose the right product. Similarly, penalties and fees, which may have been instituted to offset the costs of undesirable customer behavior, like bouncing checks, turn out to be very profitable. As a result, companies have no incentive to help customers avoid them. Tactics like these generate bad publicity and fuel customer defections, creating opportunities for competitors. Virgin Mobile USA, for example, has lured millions of angry cell phone customers away from the incumbents by offering a straightforward plan with no hidden fees, no time-of-day restrictions, and no contracts. ING Direct, now the fourth-largest thrift bank in the United States, offers accounts with no fees, no tiered interest rates, and no minimums. In industries where squeezing value from customers is commonplace, companies that dismantle these harmful practices and design a transparent, value-creating offer can head off customer retaliation and spur rapid growth.

Slippery liquid-infused porous surfaces having improved stability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aizenberg, Joanna; Vogel, Nicolas

Methods and articles disclosed herein relate to liquid repellant surfaces having selective wetting and transport properties. An article having a repellant surface includes a substrate comprising surface features with re-entrant curvature and an immobilized layer of lubricating liquid wetting over the surface features. The surface features with re-entrant curvature can be designed to provide high repellency even after failure or removal of the immobilized layer of lubricating liquid under certain operating conditions.

Essiac for cancer?

PubMed

1998-07-01

An analysis of a mixture of herbs in Essiac, an alternative-medicine anti-cancer therapy, has shown it contains a variety of compounds which have antioxidant activity as well as the ability to block cell growth. The Essiac mixture contains burdock root, Indian rhubarb, sheep sorrel, inner bark of slippery elm, watercress, blessed thistle, red clover, and kelp. A review of patients taking Essiac shows that there was no obvious toxicity. Clinical trials are recommended to determine Essiac's efficacy.

Archaeological Testing and Survey: Testing of Three Sites and Survey of a Road Detour within Proposed Project Construction Zones, Burlington Dam Flood Control Project Area, Upper Souris River, North Dakota,

DTIC Science & Technology

1980-01-01

reported in Burgess et al. (1973:19). Low bottom species in the study area include American elm (Ulmus americanus), green ash (Fraxinus pennsylvanica...deposits with "Calgon" before water screening. Because of slow permeability clay is very slippery when it becomes wet and can be hazardous to workers. The

Water Resources Development Miami River, Little Miami River, and Mill Creek Basins, Southwest Ohio. Volume 2. Appendices A-G.

DTIC Science & Technology

1981-10-01

the area. Common species include boxelder, black locust, hackberry, tree of heaven, sycamore, Osage orange, black willow, mulberry, slippery elm ...and maple include tulip poplar, white ash, red elm , American elm , black cherry, hackberry, walnut, basswood, buckeye, white oak, shagbark hickory, and...willow. Other canopy species in these communities include buckeye, elm , beech, black locust, hackberry, walnut, and silver maple. The most prevalent

Assessing the vulnerability of the transportation industry of Ukraine to future climate change

NASA Astrophysics Data System (ADS)

Khomenko, Inna

2017-04-01

Climate change will affect transportation primarily through increases in several types of weather and climate extremes. The impacts will vary by mode of transportation and region of the country, but they will be widespread and costly in both human and economic terms and will require significant changes in the planning, design, construction, operation, and maintenance of transportation systems. In the study impact of climate change on operation of road transport are analysed on the basis of RCP 4.5 and RCP 8.5 scenarios. Data contains series of daily mean, maximum and minimum temperature, daily liquid (or mixed) and solid precipitation, daily mean relative humidity and daily mean and maximum wind speed, obtained for the period of 2011 to 2050 for 28 cities distributed evenly across Ukraine. Spatial and temporal distributions of meteorological variables are obtained. The statistic characteristics obtained were compared with the correspondent climate normals and highway-related temporal changeability is determined. Frequency of freezing rain, wet snow, very hot days, droughts, fogs, ice-covered ground, slippery wet ground, ice and snow slippery coat are investigated. Climate and economic risks to the road transport network are assessed. Maps of spatial distribution of risk assessment are obtained. The results obtained show typical weather pattern is changed and climate and weather extreme influencing on operation of road transport are more frequent for the both scenarios, but for the RCP 8.5 scenario hazard weather occurs more often. During the period of 2011-2050 significant climate warming (by 2-3°C) is registered. Extreme temperatures are observed more frequently. High temperatures bring on growth in frequency of wildfires and heat waves. Annual precipitation amount decreases, except the western mountain and northern regions, where precipitation amount increase on 35%. Increase in temperature and decrease in precipitation can produce droughts in southern, eastern and central regions. But growth in precipitation in mountain region can cause flooding and landslides. Strong increase in mixed precipitation and significant reduction in ice and liquid precipitation take place for all territory of Ukraine. In the southern region ice precipitation is virtually vanished and observed only 2-3 days per year. Growth of mixed precipitation causes increase in severe weather events such as freezing precipitation, ice-covered ground and snow slippery coat.

Biomechanical and Physiological Validation of the Omni-Directional Treadmill Upgrade as a Mobility Platform for Immersive Environments

DTIC Science & Technology

2011-04-01

a potentially unstable single limb ( Marigold and Patla, 2002; Murray et al., 1985). In theory, adopting a more flexed posture should also lower the...when knowingly traversing slippery terrain ( Marigold and Patla). Despite minimal differences in temporal-spatial values and kinematics for the two...Walking in Healthy Individuals. J. Appl. Physiol. 2008, 104, 747–755. 22 Marigold , D. S.; Patla, A. E. Strategies for Dynamic Stability During

Should selecting saviour siblings be banned?

PubMed Central

Sheldon, S; Wilkinson, S

2004-01-01

This paper addresses the question of whether this form of selection should be banned and concludes that it should not. Three main prohibitionist arguments are considered and found wanting: (a) the claim that saviour siblings would be treated as commodities; (b) a slippery slope argument, which suggests that this practice will lead to the creation of so-called "designer babies"; and (c) a child welfare argument, according to which saviour siblings will be physically and/or psychologically harmed. PMID:15574438

Tonawanda Creek, Genesee County, New York, Regional Flood Control. Final Environmental Impact Statement.

DTIC Science & Technology

1981-11-01

sedges, rushes, cattails, and iris and some woody shrub species, have established within or around the periphery of these areas that help to pro- vide...extensively in spring and fall. Shrub swamps are comprised of woody species such as red-osier dogwood, silky dogwood, arrow-wood, buckthorn, slippery...valuable to wildlife and are used extensively by migrating waterfowl during the spring and summer. Shrub swamps are dominated by woody species, including

Flambeau Mining Corporation, Ladysmith, Rusk County, Wisconsin. Proposed Open Pit Copper Mine and Waste Containment Area, Draft Environmental Impact Statement.

DTIC Science & Technology

1976-08-01

American elm Lonicera tatarica - tartarian honeysuckle Ulmus rubra - slippery elm Siiibucus canadenis - common elder Ulmus thoiii~sii - cork elm ...community borders the marshes and swamps. 2.060 The predominant species are the trembling aspen (Populus tremuloides), red maple (Acer rubrum), the elms ...succession. The most numerous trees (in descending order) are: white birch, red maple, aspen, sugar maple, black ash, basswood, elm (Ulmus sp.), hemlock

Ecological Investigation of a Greentree Reservoir in the Delta National Forest, Mississippi.

DTIC Science & Technology

1981-09-01

elm (Ulmus americana) and slippery elm (U. rubra) oc- curred in the study area, with American elm the more abundant species. No distinction was made...spectively, on both areas (see Appendix C for nomenclature). American elm * and water hickory ranked fifth and sixth in importance on the ref- erence area...between these two species; the label "American elm " includes data for both. 18 boundaries, water hickory increment cores were not analyzed. Table 4

Nancy B and Nancy F.

PubMed

Burkholder, L

2001-01-01

In this article I provide a virtuous slippery slope argument which shows that there is no morally significant difference between passive and active euthanasia. At the top of the slope is an example of passive euthanasia; at the bottom, an example of active euthanasia. For each pair of cases down the slope there is nothing that sensibly makes a morally significant difference between the pair of cases. Thus, there is no morally significant difference between passive euthanasia and active euthanasia.

High-Efficiency "-1" and "-2" Ribosomal Frameshiftings Revealed by Force Spectroscopy.

PubMed

Tsai, Te-Wei; Yang, Haopeng; Yin, Heng; Xu, Shoujun; Wang, Yuhong

2017-06-16

Ribosomal frameshifting is a rare but ubiquitous process that is being studied extensively. Meanwhile, frameshifting motifs without any secondary mRNA structures were identified but rarely studied experimentally. We report unambiguous observation of highly efficient "-1" and "-2" frameshiftings on a GA 7 G slippery mRNA without the downstream secondary structure, using force-induced remnant magnetization spectroscopy combined with unique probing schemes. The result represents the first experimental evidence of multiple frameshifting steps. It is also one of the rare reports of the "-2" frameshifting. Our assay removed the ambiguity of transcriptional slippage involvement in other frameshifting assays. Two significant insights for the frameshifting mechanism were revealed. First, EF-G·GTP is indispensable to frameshifting. Although EFG·GDPCP has been shown to prompt translocation before, we found that it could not induce frameshifting. This implies that the GTP hydrolysis is responsible for the codon-anticodon re-pairing in frameshifting, which corroborates our previous mechanical force measurement of EF-G·GTP. Second, translation in all three reading frames of the slippery sequence can be induced by the corresponding in-frame aminoacyl tRNAs. Although A-site tRNA is known to affect the partition between "0" and "-1" frameshifting, it has not been reported that all three reading frames can be translated by their corresponding tRNAs. The in vitro results were confirmed by toe-printing assay and protein sequencing.

Anisotropic particle in viscous shear flow: Navier slip, reciprocal symmetry, and Jeffery orbit.

PubMed

Zhang, Jiaolong; Xu, Xinpeng; Qian, Tiezheng

2015-03-01

The hydrodynamic reciprocal theorem for Stokes flows is generalized to incorporate the Navier slip boundary condition, which can be derived from Onsager's variational principle of least energy dissipation. The hydrodynamic reciprocal relations and the Jeffery orbit, both of which arise from the motion of a slippery anisotropic particle in a simple viscous shear flow, are investigated theoretically and numerically using the fluid particle dynamics method [Phys. Rev. Lett. 85, 1338 (2000)]. For a slippery elliptical particle in a linear shear flow, the hydrodynamic reciprocal relations between the rotational torque and the shear stress are studied and related to the Jeffery orbit, showing that the boundary slip can effectively enhance the anisotropy of the particle. Physically, by replacing the no-slip boundary condition with the Navier slip condition at the particle surface, the cross coupling between the rotational torque and the shear stress is enhanced, as manifested through a dimensionless parameter in both of the hydrodynamic reciprocal relations and the Jeffery orbit. In addition, simulations for a circular particle patterned with portions of no-slip and Navier slip are carried out, showing that the particle possesses an effective anisotropy and follows the Jeffery orbit as well. This effective anisotropy can be tuned by changing the ratio of no-slip portion to slip potion. The connection of the present work to nematic liquid crystals' constitutive relations is discussed.

Factors related to falls among community dwelling elderly.

PubMed

Kuhirunyaratn, Piyathida; Prasomrak, Prasert; Jindawong, Bangonsri

2013-09-01

Falls among the elderly can lead to disability, hospitalization and premature death. This study aimed to determine the factors related to falls among community dwelling elderly. This case-control study was conducted at the Samlium Primary Care Unit (SPCU), Khon Kaen, Thailand. Cases were elderly individuals who had fallen within the previous six months and controls were elderly who had not fallen during that same time period. Subjects were taken from elderly persons registered at the SPCU. The sample size was calculated to be 111 cases and 222 controls. Face to face interviews were conducted with subjects between May and June, 2011. The response rate was 100%. On bivariate analysis, the statistically significant factors related to falls were: regular medication use, co-morbidities, mobility, depression, cluttered rooms, slippery floors, unsupported toilets (without a hand rail), sufficient exercise, rapid posture change and wearing slippers. When controlling for others significant factors, multiple logistic regression revealed significant factors were: regular medication use (AOR: 2.22; 95%CI: 1.19 - 4.12), depression (AOR: 1.76, 95% CI: 1.03 - 2.99), sufficient exercise (AOR: 0.34; 95% CI: 0.19 - 0.58) and wearing slippery shoes (AOR: 2.31; 95% CI: 1.24 - 4.29). Interventions need to be considered to modify these significant factors associated with falls and education should be provided to these at risk.

Identification of Error Types in Preservice Teachers' Attempts to Create Fraction Story Problems for Specified Operations

ERIC Educational Resources Information Center

McAllister, Cheryl J.; Beaver, Cheryl

2012-01-01

The purpose of this research was to determine if recognizable error types exist in the work of preservice teachers required to create story problems for specific fraction operations. Students were given a particular single-operation fraction expression and asked to do the calculation and then create a story problem that would require the use of…

Mass march of termites into the deadly trap.

PubMed

Merbach, Marlis A; Merbach, Dennis J; Maschwitz, Ulrich; Booth, Webber E; Fiala, Brigitte; Zizka, Georg

2002-01-03

Carnivorous pitcher plants of the genus Nepenthes are not usually very selective about their prey, catching anything that is careless enough to walk on their slippery peristome, but Nepenthes albomarginata is an exception. We show here that this plant uses a fringe of edible white hairs to lure and then trap its prey, which consists exclusively of termites in enormous numbers. This singular feature accounts for the specialization of N. albomarginata for one prey taxon, unique so far among carnivorous plants.

Safety Grooving

NASA Technical Reports Server (NTRS)

1985-01-01

Safety grooving, the cutting of grooves in concrete to increase traction and prevent injury, was first developed to reduce aircraft accidents on wet runways. Represented by the International Grooving and Grinding Association (IG&GA), the industry expanded into highway and pedestrian applications. The technique originated at Langley, which assisted in testing the grooving at airports and on highways. Skidding was reduced, stopping distance decreased, and a vehicle's cornering ability on curves was increased. The process has been extended to animal holding pens, steps, parking lots and other potentially slippery surfaces.

Deception Algorithm. Appendices

DTIC Science & Technology

1994-06-30

NOT. THE RAIN AND MUD MADE QUITE SLIPPERY. COULDHAVE BEEN QUITE A FEW INJURIES WHEN LUGGING THE DECOY AROUND. 1111 37106 HF7A HFCMT IN MOPP4 IT WAS... 10 TIMES. 1009 35115 HF5A FFCMT THE TARGET BACKGROUND HELPED GIVE AWAY THE DECOYS BECAUSE THEY WERE PUT UP ON THE SIDE OF A HILL. COLOR WAS DARKER...FFENGCMT I ENGAGED TARGETS THAT I THOUGHT WERE DECOYS APPROXIMATELY 10 TIMES BECAUSE OF RANGE TO TARGET. I COULD NOT ID MOST OF THE TIME AT NIGHT AT LONG

Modern physics - Guest editorial

NASA Astrophysics Data System (ADS)

Howes, Ruth

2000-02-01

What an exciting time to be a physicist! You only have to attend the plenaries at an AAPT meeting to realize just how many mysteries there still are. Will string theory actually prove to be a Theory of Everything? Can we use physics to understand, predict, and perhaps eventually mitigate damaging hurricanes? Is the warming trend of the Earth due to man-made changes in the atmosphere? Have we found the nuclear "island of stability" with elements 114, 116, and 118? For that matter, why is ice slippery?

Should individuals choose their definition of death?

PubMed

Molina, A; Rodríguez-Arias, D; Youngner, S J

2008-09-01

Alireza Bagheri supports a policy on organ procurement where individuals could choose their own definition of death between two or more socially accepted alternatives. First, we claim that such a policy, without any criterion to distinguish accepted from acceptable definitions, easily leads to the slippery slope that Bagheri tries to avoid. Second, we suggest that a public discussion about the circumstances under which the dead donor rule could be violated is more productive of social trust than constantly moving the line between life and death.

Climatic Atlas of the Outer Continental Shelf Waters and Coastal Regions of Alaska. Volume 2. Bering Sea. Revision

DTIC Science & Technology

1988-01-01

Joe D. Elms , for their editorial evaluation of the vironmental Assessmant Program. Additional depends to a large extent on weather condi- isopleth...waves, icing rates are open waters and coastal sectionsofAlaska.The temperatures less than 8°C, winds of 25 knots lower. icing causes slippery decks...thereby bias the oceanic climatology towards fair weather. A recent study by Elms (1986), in which he compared the Volunteer Observing Ship (VOS) data

Climatic Atlas of the Outer Continental Shelf Waters and Coastal Regions of Alaska. Volume 3. Chukchi-Beaufort Sea

DTIC Science & Technology

1988-01-01

activities Joe D. Elms , for their editorial evaluation of the vironmental Assessmant Program. Additional depends to a large extent on weathcr cond...winds of 25 knots lower. icing causes slippery decks, renders moving (13 meters per second) or more, and air tempera- parts inoperable, and, in extreme...try to avoid foul weather an thereby bias the oceanic climatology towards fair weather. A recent study by Elms (1986), in which he compared the

Aquilla Lake, Brazos River Basin, Texas, Pre-Impoundment Environmental Study: Supplement to Design Memorandum Number 9, Master Plan (in Response to: 40CFR 1505.3),

DTIC Science & Technology

1983-06-01

phaeacantha White Prairie Rose Rosa filiolosa Bur Oak Quercus macrocarpa Slippery Elm Ulrnus rubra Elbow-Bush Forestiera pubescens Southen Black-haw Virburnum...It LIST OF PLATES Plate Title Page 1 Above, a cedar elm woodland scene ( -5), herbaceous component consists primarily of Canada...3( 2 Above, view of a pecan parkland (T3-2), herbaceous and shrub components composed primarily of Smilax, June 1980. Below, a mesquite/cedar elm

General Reevaluation Report and Environmental Impact Statement for the Blanchard River, Ottawa, Ohio Flood Protection Project

DTIC Science & Technology

1987-04-01

Black locust Black willow Honey locust Mulberry Slippery elm Box elder Cottonwood Multiflora rose Green ash Hackberry The U.S. Fish and Wildlife Service...flows in the Blanchard River at Ottawa. The Perry Street bridge was removed in 1951 and replaced by a new bridge at Elm Street that is less restrictive...flood plain. The present tree growth commonly consists of a second growth of spe- cies of elm , maple, and oak. All of the Blanchard River basin lies

Cultural Resources Investigation of a Proposed Flood Control Project along the Sheyenne River, at West Fargo, Cass County, North Dakota. Phase I.

DTIC Science & Technology

1988-01-15

cottonwood (Po2ulus salrgenti), sumac (Ehus sp.), peach and sandbar willows (Salix amvdaloides; . terio), and slippery elm (Ulmus rubra). 3.4.2 Bluestem...forest of elm , oak, ash, hackberry, cottonwood, and aspen along the major streams. Archaeological evidence indicates that prehistoric people along the...black willow (Salix nifra), and American elm (Ulmus amicnan). Other components include: boxelder (Acer neaundo), red maple (A. Subrum), silver maple (A

[Euthanasia and advanced dementia].

PubMed

Keizer, B

2017-01-01

Somewhere around 1975 there was a shift in our perception of suffering that is soon followed by death: it seemed a good idea to skip this unhappy stage of life. A complicated national debate arose, and continues to this day, about whether a life may be prematurely terminated in cases of insoluble misery. Legislation came into effect 2002, after 30 years of deliberation, and the rest of the world looked on in horror. England, in particular, liked to point out that the Dutch were on a very slippery slope.

Assisted Dying in Canada.

PubMed

Schuklenk, Udo

This paper makes an affirmative ethical case in favour of the decriminalization of assisted dying in Canada. It then proceeds to defending the affirmative case against various slippery-slope arguments that are typically deployed by opponents of assisted dying. Finally, a recent case of questionable professional conduct by anti-euthanasia campaigners cum academics is flagged as a warning to all of us not to permit the quality of the professional debate to deteriorate unacceptably, despite the personal emotional investments involved on all sides of the debate.

Predicting Soil Strength in Terms of Cone Index and California Bearing Ratio for Trafficability

DTIC Science & Technology

2016-03-01

conditions, however, soil strength will be a key factor. The Wet- Slippery conditions are considered when the top layer has reached a point of...the soil . Modeling moisture content of a soil in a layered system can be conducted using a finite difference water budget model illustrated in...Figure 2 (Sellers et al. 1986). Figure 2 shows how flow Q through the soil layer ij is modeled. In general, saturation of layer Qi due to rainfall is

The M Word: Multicollinearity in Multiple Regression.

ERIC Educational Resources Information Center

Morrow-Howell, Nancy

1994-01-01

Notes that existence of substantial correlation between two or more independent variables creates problems of multicollinearity in multiple regression. Discusses multicollinearity problem in social work research in which independent variables are usually intercorrelated. Clarifies problems created by multicollinearity, explains detection of…

Slippery surfaces of pitcher plants: Nepenthes wax crystals minimize insect attachment via microscopic surface roughness.

PubMed

Scholz, I; Bückins, M; Dolge, L; Erlinghagen, T; Weth, A; Hischen, F; Mayer, J; Hoffmann, S; Riederer, M; Riedel, M; Baumgartner, W

2010-04-01

Pitcher plants of the genus Nepenthes efficiently trap and retain insect prey in highly specialized leaves. Besides a slippery peristome which inhibits adhesion of insects they employ epicuticular wax crystals on the inner walls of the conductive zone of the pitchers to hamper insect attachment by adhesive devices. It has been proposed that the detachment of individual crystals and the resulting contamination of adhesive organs is responsible for capturing insects. However, our results provide evidence in favour of a different mechanism, mainly based on the stability and the roughness of the waxy surface. First, we were unable to detect a large quantity of crystal fragments on the pads of insects detached from mature pitcher surfaces of Nepenthes alata. Second, investigation of the pitcher surface by focused ion beam treatment showed that the wax crystals form a compact 3D structure. Third, atomic force microscopy of the platelet-shaped crystals revealed that the crystals are mechanically stable, rendering crystal detachment by insect pads unlikely. Fourth, the surface profile parameters of the wax layer showed striking similarities to those of polishing paper with low grain size. By measuring friction forces of insects on this artificial surface we demonstrate that microscopic roughness alone is sufficient to minimize insect attachment. A theoretical model shows that surface roughness within a certain length scale will prevent adhesion by being too rough for adhesive pads but not rough enough for claws.

Neuromuscular adjustments of gait associated with unstable conditions

PubMed Central

Ivanenko, Y. P.; d'Avella, A.; Serrao, M.; Ranavolo, A.; Draicchio, F.; Cappellini, G.; Casali, C.; Lacquaniti, F.

2015-01-01

A compact description of coordinated muscle activity is provided by the factorization of electromyographic (EMG) signals. With the use of this approach, it has consistently been shown that multimuscle activity during human locomotion can be accounted for by four to five modules, each one comprised of a basic pattern timed at a different phase of gait cycle and the weighting coefficients of synergistic muscle activations. These modules are flexible, in so far as the timing of patterns and the amplitude of weightings can change as a function of gait speed and mode. Here we consider the adjustments of the locomotor modules related to unstable walking conditions. We compared three different conditions, i.e., locomotion of healthy subjects on slippery ground (SL) and on narrow beam (NB) and of cerebellar ataxic (CA) patients on normal ground. Motor modules were computed from the EMG signals of 12 muscles of the right lower limb using non-negative matrix factorization. The unstable gait of SL, NB, and CA showed significant changes compared with controls in the stride length, stride width, range of angular motion, and trunk oscillations. In most subjects of all three unstable conditions, >70% of the overall variation of EMG waveforms was accounted for by four modules that were characterized by a widening of muscle activity patterns. This suggests that the nervous system adopts the strategy of prolonging the duration of basic muscle activity patterns to cope with unstable conditions resulting from either slippery ground, reduced support surface, or pathology. PMID:26378199

Influence of physico-chemical, mechanical and morphological fingerpad properties on the frictional distinction of sticky/slippery surfaces

PubMed Central

Cornuault, Pierre-Henri; Carpentier, Luc; Bueno, Marie-Ange; Cote, Jean-Marc; Monteil, Guy

2015-01-01

This study investigates how the fingerpad hydrolipid film, shape, roughness and rigidity influence the friction when it rubs surfaces situated in the slippery psychophysical dimension. The studied counterparts comprised two ‘real’ (physical) surfaces and two ‘virtual’ surfaces. The latter were simulated with a tactile stimulator named STIMTAC. Thirteen women and 13 men rubbed their right forefingers against the different surfaces as their arms were displaced by a DC motor providing constant velocity and sliding distance. Tangential and normal forces were measured with a specific tribometer. The fingerpad hydrolipid film was characterized by Fourier transform infrared spectroscopy. The shape and roughness of fingers were extrapolated from replicas. Indentation measurements were carried out to determine fingerpad effective elastic modulus. A clear difference was observed between women and men in terms of friction behaviour. The concept of tactile frictional contrast (TFC) which was introduced quantifies an individual's propensity to distinguish two surfaces frictionally. The lipids/water ratio and water amount on the finger skin significantly influenced the TFC. A correlation was observed between the TFC and fingerpad roughness, i.e. the height of the fingerpad ridges. This is essentially owing to gender differences. A significant difference between men's and women's finger topography was also noted, because our results suggested that men have rougher fingers than women. The friction measurements did not correlate with the fingerpad curvature nor with the epidermal ridges' spatial period. PMID:26269232

Physician assisted suicide and clinical vulnerability: a slippery slope.

PubMed

Monacelli, F; Martini, M; Odetti, P; Ciliberti, R

2016-01-01

The Belgian case of a 24 years' woman affected by resistant depression, who obtained the legal right to assisted suicide rehearsed ethical issues. From the famous Chabot case of the Dutch court in 1994, accumulating legal evidence indicates that the unbearable psychiatric suffering may be equate to the physical struggle of end of life patients. The Belgian law has addressed assisted suicide as an option in case of unbearable psychic suffering with no future prospective. It is unlikely that the practice of euthanasia may be mechanistically reduced to the provision of a suicide as alleviating the burden of suffering in depression is a long life commitment; moreover, the principle of patient's self determination and autonomy is highly debatable: the closure to the future, the hopelessness and the suicidal ideation represent per se core features of depression. Might they be discriminated as non pathological in assessing patients' competence and how? The slippery slopes is even more upsetting when dealing with elderly affected by chronic disability. Some body of evidence justified suicide in elderly as the final auto determination to preserve the person's dignity, and quality of life. The growing scenario of economic shortages in heath care system seems to further legalize the social prejudice and the ageistic discrimination towards elderly with disability. The silver tsunami will face the challenge of true self determination; will it be acted through assisted suicide or through a rebuilding of western heath care policies to fulfill the emergent needs of an aging population?

Vulnerability and the 'slippery slope' at the end-of-life: a qualitative study of euthanasia, general practice and home death in The Netherlands.

PubMed

Norwood, Frances; Kimsma, Gerrit; Battin, Margaret P

2009-12-01

One enduring criticism of the Dutch euthanasia policy is the 'slippery slope' argument that suggests that allowing physicians to conduct legal euthanasia or assisted suicide would eventually lead to patients being killed against their will. What we currently know about euthanasia and its practices in The Netherlands is predominantly based on retrospective quantitative or interview-based studies, but these studies fail to detail the mechanisms of day-to-day practice. To examine the practices that surround euthanasia, particularly among vulnerable patients, using qualitative observation-based data. A 15-month qualitative, observation-based study of home death and general practice in the greater Amsterdam region of The Netherlands. Study included observation and interviews with a sample of 15 (GPs and 650 of their patients, 192 of whom were living with terminal or life-threatening illness (with and without requests for euthanasia). Euthanasia practice typically involves extensive deliberations, the majority of which do not end in a euthanasia death. Euthanasia discussions or 'euthanasia talk' share at least two consequences: (i) the talk puts the onus on patients to continue discussions towards a euthanasia death and (ii) there is a socio-therapeutic component, which tends to affirm social bonds and social life. While this qualitative evidence cannot disprove existence of abuse, it suggests that euthanasia practices have evolved in such a way that patients are more likely to talk about euthanasia than to die a euthanasia death.

EFFECTS OF MOVEABLE PLATFORM TRAINING IN PREVENTING SLIP-INDUCED FALLS IN OLDER ADULTS

PubMed Central

Parijat, Prakriti; Lockhart, Thurmon E

2011-01-01

Identifying effective interventions is vitalin preventing slip-induced fall accidents in older adults. The purpose of the current study was to evaluate the efficacy of moveable platform training in improving recovery reactions and reducing fall frequency in older adults. Twenty-four older adults were recruited and randomly assigned to two groups (training and control). Both groups underwent three sessions including baseline slip, training, and transfer of training on a slippery surface. Both groups experienced two slips on a slippery surface, one during the baseline and the other (after two weeks) during the transfer of training session. In the training session, the training group underwent twelve simulated slips using a moveable platform while the control group performed normal walking trials. Kinematic, kinetic, and EMG data were collected during all the sessions. Results indicated a reduced incidence of falls in the training group during the transfer of training trial as compared to the control group. The training group was able to transfer proactive and reactive control strategies learned during training to the second slip trial. The proactive adjustments include increased center-of-mass velocity and transitional acceleration after training. Reactive adjustments include reduction in muscle onset and time to peak activations of knee flexors and ankle plantarflexors, reduced ankle and knee coactivation, reduced slip displacement, and reduced time to peak knee flexion, trunk flexion, and hip flexion velocities. In general, the results indicated a beneficial effect of perturbation training in reducing slip severity and recovery kinematics in healthy older adults. PMID:22134467

Relevance of detail in basal topography for basal slipperiness inversions: a case study on Pine Island Glacier, Antarctica

NASA Astrophysics Data System (ADS)

Kyrke-Smith, Teresa M.; Gudmundsson, G. Hilmar; Farrell, Patrick E.

2018-04-01

Given high-resolution satellite-derived surface elevation and velocity data, ice-sheet models generally estimate mechanical basal boundary conditions using surface-to-bed inversion methods. In this work, we address the sensitivity of results from inversion methods to the accuracy of the bed elevation data on Pine Island Glacier. We show that misfit between observations and model output is reduced when high-resolution bed topography is used in the inverse model. By looking at results with a range of detail included in the bed elevation, we consider the separation of basal drag due to the bed topography (form drag) and that due to inherent bed properties (skin drag). The mean value of basal shear stress is reduced when more detailed topography is included in the model. This suggests that without a fully resolved bed a significant amount of the basal shear stress recovered from inversion methods may be due to the unresolved bed topography. However, the spatial structure of the retrieved fields is robust as the bed accuracy is varied; the fields are instead sensitive to the degree of regularisation applied to the inversion. While the implications for the future temporal evolution of PIG are not quantified here directly, our work raises the possibility that skin drag may be overestimated in the current generation of numerical ice-sheet models of this area. These shortcomings could be overcome by inverting simultaneously for both bed topography and basal slipperiness.

The "Second Place" Problem: Assistive Technology in Sports and (Re) Constructing Normal.

PubMed

Baker, D A

2016-02-01

Objections to the use of assistive technologies (such as prostheses) in elite sports are generally raised when the technology in question is perceived to afford the user a potentially "unfair advantage," when it is perceived as a threat to the purity of the sport, and/or when it is perceived as a precursor to a slippery slope toward undesirable changes in the sport. These objections rely on being able to quantify standards of "normal" within a sport so that changes attributed to the use of assistive technology can be judged as causing a significant deviation from some baseline standard. This holds athletes using assistive technologies accountable to standards that restrict their opportunities to achieve greatness, while athletes who do not use assistive technologies are able to push beyond the boundaries of these standards without moral scrutiny. This paper explores how constructions of fairness and "normality" impact athletes who use assistive technology to compete in a sporting venue traditionally populated with "able-bodied" competitors. It argues that the dynamic and obfuscated construction of "normal" standards in elite sports should move away from using body performance as the measuring stick of "normal," toward alternate forms of constructing norms such as defining, quantifying, and regulating the mechanical actions that constitute the critical components of a sport. Though framed within the context of elite sports, this paper can be interpreted more broadly to consider problems with defining "normal" bodies in a society in which technologies are constantly changing our abilities and expectations of what normal means.

Prevalence of lameness and associated risk factors in Canadian Holstein-Friesian cows housed in freestall barns.

PubMed

Solano, L; Barkema, H W; Pajor, E A; Mason, S; LeBlanc, S J; Zaffino Heyerhoff, J C; Nash, C G R; Haley, D B; Vasseur, E; Pellerin, D; Rushen, J; de Passillé, A M; Orsel, K

2015-10-01

Lameness is a severe welfare problem and a production-limiting disease in dairy farming. The objectives of this study were to determine prevalence of lameness and investigate cow- and herd-level factors associated with lameness in dairy cows housed in freestall barns in 3 Canadian provinces. A purposive sample of 40 Holstein-Friesian cows was selected from each of 141 dairy farms in Québec, Ontario, and Alberta. In total, 5,637 cows were scored once for lameness (presence of limping when walking). Data collected included information on individual cows (hock lesions, claw length, body condition score, parity, days in milk, and milk production), management practices (floor and stall cleaning routine, bedding routine, and footbath practices), and facility design (stall dimensions, stall base and bedding type, width of feed alley, flooring type, and slipperiness) hypothesized to be risk factors for lameness. Multilevel mixed logistic regression models were constructed (including farm as a random effect and province as a fixed effect). Herd-level lameness prevalence ranged from 0 to 69% (mean = 21%). Lameness prevalence increased with increasing parity; compared with first parity, cows in parity 2, 3, and ≥ 4 had 1.6, 3.3, and 4 times, respectively, higher odds of being lame. Furthermore, the odds of lameness were 1.6 times greater in cows with low body condition score (≤ 2.5) than in cows with a higher body condition score. In addition, injured hocks and overgrown claws were associated with 1.4- and 1.7-fold increased odds of being lame, respectively, whereas every 1 kg increase in daily milk production was associated with a 3% decrease in the odds of being lame. Lameness prevalence was higher in herds with ≤ 100 cows, but lower in barns with a sand or dirt stall base, or with bedding ≥ 2 cm deep. Cows exposed to very slippery floors had 2 times the odds of being lame compared with cows exposed to nonslippery floors. We attributed the wide range of lameness prevalence to the great variability in facilities and management practices among farms. Finally, we inferred that the prevalence of lameness could be decreased by improving management of multiparous, thin, or injured cows and by adopting management practices intended to improve cow comfort, namely the floor's slip resistance and the stall's lying surface. Copyright © 2015 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Creating an Online Laboratory

DTIC Science & Technology

2015-03-18

Problem (TSP) to solve, a canonical computer science problem that involves identifying the shortest itinerary for a hypothetical salesman traveling among a...also created working versions of the travelling salesperson problem , prisoners’ dilemma, public goods game, ultimatum game, word ladders, and...the task within networks of others performing the task. Thus, we built five problems which could be embedded in networks: the traveling salesperson

Like a slippery fish, a little slime is a good thing: the glycocalyx revealed.

PubMed

Biddle, Chuck

2013-12-01

The glycocalyx is a dynamic network of multiple membrane-bound complexes lining the vascular endothelium. Its role in maintaining vascular homeostasis includes regulating vascular permeability as well as a range of vital functions, such as mechanotransduction, hemostasis, modulation of inflammatory processes, and serving as an antiatherogenic. Revisionist thinking about the Starling principle is discussed in terms of the major influence of the glycocalyx on capillary and tissue fluid homeostasis. The clinical and pathophysiologic threats to the glycocalyx are reviewed as well as strategies to maintain its integrity.

Field evaluation of two commonly used slipmeters.

PubMed

Chang, Wen-Ruey; Cotnam, John P; Matz, Simon

2003-01-01

A variety of slipmeters have been used to assess the slipperiness of floor surfaces. International standards for the operation of slipmeters describe the protocol for a single measurement. These standards usually do not cover some of the critical elements in safety assessment such as methods for the selection of measurement locations and the necessary number of repeated measurements at each location. Furthermore, most of the slipmeters were evaluated in laboratory settings with new floor surfaces and artificial contaminants. Two commonly used slipmeters, the Brungraber Mark II and the English XL, were evaluated at actual worksites in this experiment. Four floor tiles in each of four different work areas in the kitchens of 18 fast food restaurants were selected for repeated measurements with these two slipmeters. The results indicated that sanding of footwear materials has a significant effect on the outcomes of friction measurements, and the tile-to-tile variations in friction in the same areas of restaurants were also mostly statistically significant. Significant local variation in friction among tiles in the same area could potentially increase the chances of slip and fall incidents. Both slipmeters used in this experiment could potentially have problems in the areas with grease, such as grill and fryer areas, since the build-up of grease during repeated strikes could alter the outcome of friction measured.

Direct numerical simulation of turbulent channel flow over a liquid-infused micro-grooved surface

NASA Astrophysics Data System (ADS)

Chang, Jaehee; Jung, Taeyong; Choi, Haecheon; Kim, John

2016-11-01

Recently a superhydrophobic surface has drawn much attention as a passive device to achieve high drag reduction. Despite the high performance promised at ideal conditions, maintaining the interface in real flow conditions is an intractable problem. A non-wetting surface, known as the slippery liquid-infused porous surface (SLIPS) or the lubricant-impregnated surface (LIS), has shown a potential for drag reduction, as the working fluid slips at the interface but cannot penetrate into the lubricant layer. In the present study, we perform direct numerical simulation of turbulent channel flow over a liquid-infused micro-grooved surface to investigate the effects of this surface on the interfacial slip and drag reduction. The flow rate of water is maintained constant corresponding to Reτ 180 in a fully developed turbulent channel flow, and the lubricant layer is shear-driven by the turbulent water flow. The lubricant layer is also simulated with the assumption that the interface is flat (i.e. the surface tension effect is neglected). The solid substrate in which the lubricant is infused is modelled as straight ridges using an immersed boundary method. DNS results show that drag reduction by the liquid-infused surface is highly dependent on the viscosity of the lubricant.

An Examination of Preservice Teachers' Capacity to Create Mathematical Modeling Problems for Children

ERIC Educational Resources Information Center

Paolucci, Catherine; Wessels, Helena

2017-01-01

This study examined preservice teachers' (PSTs) capacity to create mathematical modeling problems (MMPs) for grades 1 to 3. PSTs created MMPs for their choice of grade level and aligned the mathematical content of their MMPs with the relevant mathematics curriculum. PSTs were given criteria adapted from Galbraith's MMP design principles to guide…

Learning through Real-World Problem Solving: The Power of Integrative Teaching.

ERIC Educational Resources Information Center

Nagel, Nancy G.

This book is based on the idea that curriculum development projects focused on integrated or interdisciplinary teaching within the context of real-world problem solving creates dynamics and meaningful learning experiences for students. The real-world, problem-solving units presented in this book were created by four intern teachers, their mentor…

Student-Created Homework Problems Based on YouTube Videos

ERIC Educational Resources Information Center

Liberatore, Matthew W.; Marr, David W. M.; Herring, Andrew M.; Way, J. Douglas

2013-01-01

Inspired by YouTube videos, students created homework problems as part of a class project. The project has been successful at different parts of the semester and demonstrated learning of course concepts. These new problems were implemented both in class and as part of homework assignments without significant changes. Examples from a material and…

Insect aquaplaning: Nepenthes pitcher plants capture prey with the peristome, a fully wettable water-lubricated anisotropic surface.

PubMed

Bohn, Holger F; Federle, Walter

2004-09-28

Pitcher plants of the genus Nepenthes have highly specialized leaves adapted to attract, capture, retain, and digest arthropod prey. Several mechanisms have been proposed for the capture of insects, ranging from slippery epicuticular wax crystals to downward-pointing lunate cells and alkaloid secretions that anesthetize insects. Here we report that perhaps the most important capture mechanism has thus far remained overlooked. It is based on special surface properties of the pitcher rim (peristome) and insect "aquaplaning." The peristome is characterized by a regular microstructure with radial ridges of smooth overlapping epidermal cells, which form a series of steps toward the pitcher inside. This surface is completely wettable by nectar secreted at the inner margin of the peristome and by rain water, so that homogenous liquid films cover the surface under humid weather conditions. Only when wet, the peristome surface is slippery for insects, so that most ant visitors become trapped. By measuring friction forces of weaver ants (Oecophylla smaragdina) on the peristome surface of Nepenthes bicalcarata, we demonstrate that the two factors preventing insect attachment to the peristome, i.e., water lubrication and anisotropic surface topography, are effective against different attachment structures of the insect tarsus. Peristome water films disrupt attachment only for the soft adhesive pads but not for the claws, whereas surface topography leads to anisotropic friction only for the claws but not for the adhesive pads. Experiments on Nepenthes alata show that the trapping mechanism of the peristome is also essential in Nepenthes species with waxy inner pitcher walls.

The effectiveness of electronic stability control in reducing real-world crashes: a literature review.

PubMed

Ferguson, Susan A

2007-12-01

Electronic stability control (ESC) is designed to help drivers maintain heading control of their vehicles in high-speed or sudden maneuvers and on slippery roads. The wider proliferation of ESC across the vehicle fleet has allowed evaluation of its effects in real-world crashes in many countries, including Japan, Germany, Sweden, France, Great Britain, and the United States. This article provides a summary of the findings. Studies that examined the real-world effectiveness of ESC were reviewed. Crash effects have been examined for different roadways, using differing analytic methods, different crash severities, and different make/model vehicles including both cars and SUVs. The review discusses the methodological differences and examines the findings according to vehicle type, crash type and severity, and road conditions. The overwhelming majority of studies find that ESC is highly effective in reducing single-vehicle crashes in cars and SUVs. Fatal single-vehicle crashes involving cars are reduced by about 30-50% and SUVs by 50-70%. Fatal rollover crashes are estimated to be about 70-90% lower with ESC regardless of vehicle type. A number of studies find improved effectiveness in reducing crashes when road conditions are slippery. There is little or no effect of ESC in all multi-vehicle crashes; however, there is a 17-38% reduction in more serious, fatal multi-vehicle crashes. Given the extraordinary benefits of ESC in preventing crashes, especially those with more serious outcomes, the implementation of ESC should be accelerated to cover the full range of passenger vehicles in both developed and developing markets.

A General Architecture for Intelligent Tutoring of Diagnostic Classification Problem Solving

PubMed Central

Crowley, Rebecca S.; Medvedeva, Olga

2003-01-01

We report on a general architecture for creating knowledge-based medical training systems to teach diagnostic classification problem solving. The approach is informed by our previous work describing the development of expertise in classification problem solving in Pathology. The architecture envelops the traditional Intelligent Tutoring System design within the Unified Problem-solving Method description Language (UPML) architecture, supporting component modularity and reuse. Based on the domain ontology, domain task ontology and case data, the abstract problem-solving methods of the expert model create a dynamic solution graph. Student interaction with the solution graph is filtered through an instructional layer, which is created by a second set of abstract problem-solving methods and pedagogic ontologies, in response to the current state of the student model. We outline the advantages and limitations of this general approach, and describe it’s implementation in SlideTutor–a developing Intelligent Tutoring System in Dermatopathology. PMID:14728159

The Groningen Protocol - the Jewish perspective.

PubMed

Gesundheit, Benjamin; Steinberg, Avraham; Blazer, Shraga; Jotkowitz, Alan

2009-01-01

Despite significant advances in neonatology, there will always be newborns with serious life-threatening conditions creating most difficult bioethical dilemmas. Active euthanasia for adult patients is one of the most controversial bioethical questions; for severely ill neonates, the issue is even more complex, due to their inability to take part in any decision concerning their future. The Groningen Protocol introduced in 2005 by P.J. Sauer proposes criteria allowing active euthanasia for severely ill, not necessarily terminal, newborns with incurable conditions and poor quality of life in order to spare them unbearable suffering. We discuss the ethical dilemma and ideological foundations of the protocol, the opinions of its defenders and critics, and the dangers involved. The Jewish perspective relating to the subject is presented based on classical Jewish sources, which we trust may enrich modern bioethical debates. In Jewish law, the fetus acquires full legal status only after birth. However, while the lives of terminally ill neonates must in no way be actively destroyed or shortened, there is no obligation to make extraordinary efforts to prolong their lives. Accurate preimplantation or prenatal diagnosis might significantly reduce the incidence of nonviable births, but active killing of infants violates the basic foundations of Jewish law, and opens the 'slippery slope' for uncontrolled abuse. Therefore, we call upon the international medical and bioethical community to reject the Groningen Protocol that permits euthanization and to develop ethical guidelines for the optimal care of severely compromised neonates. Copyright 2009 S. Karger AG, Basel.

The engine maintenance scheduling by using reliability centered maintenance method and the identification of 5S application in PT. XYZ

NASA Astrophysics Data System (ADS)

Sembiring, N.; Panjaitan, N.; Saragih, A. F.

2018-02-01

PT. XYZ is a manufacturing company that produces fresh fruit bunches (FFB) to Crude Palm Oil (CPO) and Palm Kernel Oil (PKO). PT. XYZ consists of six work stations: receipt station, sterilizing station, thressing station, pressing station, clarification station, and kernelery station. So far, the company is still implementing corrective maintenance maintenance system for production machines where the machine repair is done after damage occurs. Problems at PT. XYZ is the absence of scheduling engine maintenance in a planned manner resulting in the engine often damaged which can disrupt the smooth production. Another factor that is the problem in this research is the kernel station environment that becomes less convenient for operators such as there are machines and equipment not used in the production area, slippery, muddy, scattered fibers, incomplete use of PPE, and lack of employee discipline. The most commonly damaged machine is in the seed processing station (kernel station) which is cake breaker conveyor machine. The solution of this problem is to propose a schedule plan for maintenance of the machine by using the method of reliability centered maintenance and also the application of 5S. The result of the application of Reliability Centered maintenance method is obtained four components that must be treated scheduled (time directed), namely: for bearing component is 37 days, gearbox component is 97 days, CBC pen component is 35 days and conveyor pedal component is 32 days While after identification the application of 5S obtained the proposed corporate environmental improvement measures in accordance with the principles of 5S where unused goods will be moved from the production area, grouping goods based on their use, determining the procedure of cleaning the production area, conducting inspection in the use of PPE, and making 5S slogans.

"Cast Your Net Widely": Three Steps to Expanding and Refining Your Problem before Action Learning Application

ERIC Educational Resources Information Center

Reese, Simon R.

2015-01-01

This paper reflects upon a three-step process to expand the problem definition in the early stages of an action learning project. The process created a community-powered problem-solving approach within the action learning context. The simple three steps expanded upon in the paper create independence, dependence, and inter-dependence to aid the…

Battered Husbands and Battered Wives: Why One Is a Social Problem and the Other Is Not.

ERIC Educational Resources Information Center

Lucal, Betsy

A number of factors came together in the 1970s to create a social problem called "battered wives". Then, beginning in 1977, there was an attempt to create a social problem called "battered husbands." So far, such attempts have been unsuccessful. This analysis compares the issue of battered husbands and battered wives to…

Environmental Education.

ERIC Educational Resources Information Center

Bandhu, Desh, Ed.; Aulakh, G. S., Ed.

In India, environmental education (EE) is introduced at various levels. Goals of this country's EE programs include: improving the quality of environment to create awareness among the people on environmental problems and conservation; developing skills to solve environmental problems; creating the necessary atmosphere for citizen participation in…

Dance floors as injury risk: analysis and evaluation of acute injuries caused by dance floors in professional dance with regard to preventative aspects.

PubMed

Wanke, Eileen M; Mill, Helmgard; Wanke, Alice; Davenport, Jaqueline; Koch, Franziska; Groneberg, David A

2012-09-01

A dance floor is often the only support of movements in dance. A dance floor surface that shows deficiencies, can result in acute injuries and chronic problems. Although the significance of an adequate dance floor is well known, there is still a lack of differentiated analyses of dance floor-related acute injuries. This study presents data on acute injuries exclusively caused by the dance floor. The data were obtained from standardized work accident reports from consultants (F 1000), documentary accident records from all Berlin theatres, a state ballet school (n=2,281), and case records from the Berlin State Accident Insurance (UKB) covering a period of 17 years. All analyses and descriptive statistics were conducted with Excel 2007 and SPSS 18. Dance floor surfaces were the causative factor in 12.8% of all accidents (n=291, female 183, male 108). Almost two thirds (62.6%) of all accidents in professional dancers happened on stage, and almost half (49.5%) occurred during performances. As for causative factors, 53.1% of the professional dancers (P) and 42.5% of the dance students (S) claimed that the floor had been "too slippery," with "getting stuck" or (tripping) as the second most common problem (P 18.4%, S 11.3%). Of the injured dancers, 41.8% were older than 30 years and can therefore be categorized as experienced. Dance floors play a significant role in the occurrence of acute injuries, even in experienced dancers. Performances on stage seem to be a particular risk. However, injury prevention measures should include all work locations (P) as well as non-dance-specific locations (S).

Problems Solved, Problems Created: A Critical-Case Analysis of a Public-Private Partnership in Alternative Education for At-Risk Students

ERIC Educational Resources Information Center

Callet, Valerie

2010-01-01

The purpose of the present study was to determine what problems are solved and created when two school districts and one charter school partnered with a private company to provide alternative education to at-risk students. The research also aimed to address lessons learned as well as principal advantages and disadvantages of the partnership. Data…

Solution mechanism guide: implementing innovation within a research & development organization.

PubMed

Keeton, Kathryn E; Richard, Elizabeth E; Davis, Jeffrey R

2014-10-01

In order to create a culture more open to novel problem-solving mechanisms, NASA's Human Health and Performance Directorate (HH&P) created a strategic knowledge management tool that educates employees about innovative problem-solving techniques, the Solution Mechanism Guide (SMG). The SMG is a web-based, interactive guide that leverages existing and innovative problem-solving methods and presents this information as a unique user experience so that the employee is empowered to make the best decision about which problem-solving tool best meets their needs. By integrating new and innovative methods with existing problem solving tools, the SMG seamlessly introduces open innovation and collaboration concepts within HH&P to more effectively address human health and performance risks. This commentary reviews the path of creating a more open and innovative culture within HH&P and the process and development steps that were taken to develop the SMG.

Age related effects of transitional floor surfaces and obstruction of view on gait characteristics related to slips and falls

PubMed Central

Bunterngchit, Yuthachai; Lockhart, Thurmon; Woldstad, Jeffrey C.; Smith, James L.

2010-01-01

A laboratory study was conducted to examine gait changes between younger and older subjects as they walked across different floor surfaces. Twenty subjects participated in the experiment (five each of older and younger males and females). For half of the trials, subjects carried light loads that blocked their view of the floor surface immediately in front of them. Subjects walked on slippery (soapy water on vinyl) and stable (outdoor carpet) floor surfaces, as well as transitioning from one surface to another. Responses studied included: required coefficient of friction (RCOF), stride length (SL), and minimum toe clearance (MTC). Significant effects were found for the floor surface, load versus no load condition, and some interactions involving age (older versus younger subjects). Not all expected differences due to age were found in this experiment. The lack of significant differences between younger and older subjects could be due to the older subjects that participated in the experiment. They were volunteers at a local medical center, were in good physical shape, and were probably not typical of the population of people over 65 years of age. Relevance to industry Slips and falls in industry are costly safety issues in terms of human suffering as well as financial compensation. In many facilities and at home, people make transitions from one floor surface to another many times each day, while carrying loads or just walking. A better understanding of characteristics of people as they walk on slippery floor surfaces and the changes that might occur with age, will allow engineers to design better floor surfaces to reduce the incidence of slips and falls. PMID:20607122

Trust increases euthanasia acceptance: a multilevel analysis using the European Values Study.

PubMed

Köneke, Vanessa

2014-12-20

This study tests how various kinds of trust impact attitudes toward euthanasia among the general public. The indication that trust might have an impact on euthanasia attitudes is based on the slippery slope argument, which asserts that allowing euthanasia might lead to abuses and involuntary deaths. Adopting this argument usually leads to less positive attitudes towards euthanasia. Tying in with this, it is assumed here that greater trust diminishes such slippery slope fears, and thereby increases euthanasia acceptance. The effects of various trust indicators on euthanasia acceptance were tested using multilevel analysis, and data from the European Values Study 2008 (N = 49,114, 44 countries). More precisely, the influence of people's general levels of trust in other people, and their confidence in the health care system, were measured--both at the individual and at the country level. Confidence in the state and the press were accounted for as well, since both institutions might monitor and safeguard euthanasia practices. It was shown that the level of trust in a country was strongly positively linked to euthanasia attitudes, both for general trust and for confidence in health care. In addition, within countries, people who perceived their fellow citizens as trustworthy, and who had confidence in the press, were more supportive of euthanasia than their less trusting counterparts. The pattern was, however, not true for confidence in the state and for confidence in the health care system at the individual level. Notably, all confirmative effects held, even when other variables such as religiosity, education, and values regarding autonomy were controlled for. Trust seems to be a noteworthy construct to explain differences in attitudes towards euthanasia, especially when drawing cross-country comparisons. Therefore, it should be added to the existing literature on correlates of euthanasia attitudes.

AGARD Flight Test Techniques Series. Volume 3. Identification of Dynamic Systems - Applications to Aircraft. Part 1. The Output Error Approach

DTIC Science & Technology

1986-12-01

poorly written problem statements. We decline to artificially create difficulties for experimentation. Others have encountered these issues and treated...you lose some of the weaning. The method also does not extend well to nonlinear or time-varying system (sometimes it can be don#. but it creates ...thereby introduced creates problems and solves nothing. For variable-geometry aircraft, some projects establish reference geometry values that change as

Understanding Critical Thinking to Create Better Doctors

ERIC Educational Resources Information Center

Zayapragassarazan, Zayabalaradjane; Menon, Vikas; Kar, Sitanshu Sekhar; Batmanabane, Gitanjali

2016-01-01

Medical students master an enormous body of knowledge, but lack systematic problem solving ability and effective clinical decision making. High profile reports have called for reforms in medical education to create a better generation of doctors who can cope with the system based problems they would encounter in an interdisciplinary and…

Investigation of Mechanical Breakdowns Leading to Lock Closures

DTIC Science & Technology

2017-06-01

wide variety of issues lead to emergency clo- sures, yet no specific problem (s) that frequently cause unscheduled clo- sures were identified. Table 2-3...Reporting Used to create basic work orders, report problems or malfunctions, or request work to be done. Used to create and process work orders from...work order page for recording the failure class, problem , cause, and remedy (Figure 3-1). Appendix C includes a full list of failure classes

Reverse and Add to 100: Explorations in Place Value

ERIC Educational Resources Information Center

Edwards, Michael Todd; Quinlan, James; Strayer, Jeremy F.

2016-01-01

During the past few years, several of the authors have incorporated student problem posing as a regular instructional feature in their classrooms. When they offer their students the opportunity to construct their own problems, particularly during the course of an entire school year, they create many novel tasks. Student-created tasks not only…

Tips on Creating Complex Geometry Using Solid Modeling Software

ERIC Educational Resources Information Center

Gow, George

2008-01-01

Three-dimensional computer-aided drafting (CAD) software, sometimes referred to as "solid modeling" software, is easy to learn, fun to use, and becoming the standard in industry. However, many users have difficulty creating complex geometry with the solid modeling software. And the problem is not entirely a student problem. Even some teachers and…

Ultra low friction carbon/carbon composites for extreme temperature applications

DOEpatents

Erdemir, Ali; Busch, Donald E.; Fenske, George R.; Lee, Sam; Shepherd, Gary; Pruett, Gary J.

2001-01-01

A carbon/carbon composite in which a carbon matrix containing a controlled amount of boron or a boron compound is reinforced with carbon fiber exhibits a low coefficient of friction, i.e., on the order of 0.04 to 0.1 at temperatures up to 600.degree. C., which is one of the lowest frictional coefficients for any type of carbonaceous material, including graphite, glassy carbon, diamond, diamond-like carbon and other forms of carbon material. The high degree of slipperiness of the carbon composite renders it particularly adapted for limiting friction and wear at elevated temperatures such as in seals, bearings, shafts, and flexible joints

Boundary lubrication of heterogeneous surfaces and the onset of cavitation in frictional contacts

PubMed Central

Savio, Daniele; Pastewka, Lars; Gumbsch, Peter

2016-01-01

Surfaces can be slippery or sticky depending on surface chemistry and roughness. We demonstrate in atomistic simulations that regular and random slip patterns on a surface lead to pressure excursions within a lubricated contact that increase quadratically with decreasing contact separation. This is captured well by a simple hydrodynamic model including wall slip. We predict with this model that pressure changes for larger length scales and realistic frictional conditions can easily reach cavitation thresholds and significantly change the load-bearing capacity of a contact. Cavitation may therefore be the norm, not the exception, under boundary lubrication conditions. PMID:27051871

Vegetation in the Flood Plain Adjacent to the Mississippi River between Cairo, Illinois, and St. Paul, Minnesota, and in the Flood Plain of the Illinois River between Grafton, Illinois, and Chicago, and the Possible Impacts That Will Result from the Construction of L & D 26 and the Associated Increase in Barge Traffic,

DTIC Science & Technology

1975-01-20

americana), green ash (Fraxinus lanceolata), pecan (Carya illinoensis), sugarberry (Celtis laevigata), and red mulberry (Morus rubra). Also...cottonwood (Populus deltoides), silver maple (Acer saccharinum), box elder (Acer negundo), and green ash (Frax- inus lanceolata). There is a rather sparse...Amer- ican elm (Ulmus americana), slippery elm (U. rubra), box elder (Acer negundo), sycamore (Platanus occidentalis) green ash (Fraxinus lanceo- lata

Modified loop technique in three dogs with mitral regurgitation.

PubMed

Aoki, Takuma; Fujii, Yoko; Sunahara, Hiroshi; Takano, Hiroshi; Wakao, Yoshito

2013-01-31

Mitral valvuloplasty (MVP) is used in dogs with refractory mitral regurgitation (MR); however, it is difficult to tie the artificial chord, i.e., the expanded polytetrafluoroethylene suture, at the planned height of the mitral valve, because of the slippery nature of the knot. The loop technique has resolved these difficulties in humans. Premanufactured loops (length, 8.0-15.0 mm with 1.0-mm increments) were used in the new modified loop technique. In the current study, cardiac murmurs disappeared, and the MR markedly improved or completely disappeared approximately 3 months after surgery in 3 dogs. Therefore, this new technique might be effective in dogs.

Limestone Creek, Local Flood Protection, Fayetteville, New York

DTIC Science & Technology

1990-08-01

maple, slippery elm , syca- more, black locust, dogwood, sumac, choke cherry, creeping cucumber, goldenrod and teasel. Wooded areas on the surrounding...CIRCLE C. -AkA- BARKER t LANE IVIALL KEN 4A AVE 2 7rflEE EEOER r ’A CHANIC S ENWOOD LANE Shcoping cc a ttev Center RNE -V ELM STREET GENES STREET...0~i r; 0 i cyO n 0 00.- w ~ 0vwf N - N 9 00 0 , - 00 -l N NO w IV a,0 200 000 -0 a, r. elm ID MW PN0NIN MOJn 0m M e. 0’iamo 0 q0 ON T0 Fw% N..NV

Improved LTVMPC design for steering control of autonomous vehicle

NASA Astrophysics Data System (ADS)

Velhal, Shridhar; Thomas, Susy

2017-01-01

An improved linear time varying model predictive control for steering control of autonomous vehicle running on slippery road is presented. Control strategy is designed such that the vehicle will follow the predefined trajectory with highest possible entry speed. In linear time varying model predictive control, nonlinear vehicle model is successively linearized at each sampling instant. This linear time varying model is used to design MPC which will predict the future horizon. By incorporating predicted input horizon in each successive linearization the effectiveness of controller has been improved. The tracking performance using steering with front wheel and braking at four wheels are presented to illustrate the effectiveness of the proposed method.

Should Pediatric Euthanasia be Legalized?

PubMed

Brouwer, Marije; Kaczor, Christopher; Battin, Margaret P; Maeckelberghe, Els; Lantos, John D; Verhagen, Eduard

2018-02-01

Voluntary active euthanasia for adults at their explicit request has been legal in Belgium and the Netherlands since 2002. In those countries, acceptance of the practice for adults has been followed by acceptance of the practice for children. Opponents of euthanasia see this as a dangerous slippery slope. Proponents argue that euthanasia is sometimes ethically appropriate for minors and that, with proper safeguards, it should be legally available in appropriate circumstances for patients at any age. In this Ethics Rounds, we asked philosophers from the United States and the Netherlands, and a Dutch pediatrician, to discuss the ethics of legalizing euthanasia for children. Copyright © 2018 by the American Academy of Pediatrics.

The nucleosome: A transparent, slippery, sticky and yet stable DNA-protein complex

NASA Astrophysics Data System (ADS)

Schiessel, H.

2006-03-01

Roughly three quarters of eucaryotic DNA are tightly wrapped onto protein cylinders organized in so-called nucleosomes. Despite this fact, the wrapped DNA cannot be inert since DNA is at the heart of many crucial life processes. We focus here on physical mechanisms that might allow nucleosomes to perform a great deal of such processes, specifically 1) on unwrapping fluctuations that give DNA-binding proteins access to the wrapped DNA portions without disrupting the nucleosome as a whole, 2) on corkscrew sliding along DNA and some implications and on 3) tail-bridging-induced attraction between nucleosomes as a means of controlling higher-order folding.

Creating a pediatric digital library for pediatric health care providers and families: using literature and data to define common pediatric problems.

PubMed

D'Alessandro, Donna; Kingsley, Peggy

2002-01-01

The goal of this study was to complete a literature-based needs assessment with regard to common pediatric problems encountered by pediatric health care providers (PHCPs) and families, and to develop a problem-based pediatric digital library to meet those needs. The needs assessment yielded 65 information sources. Common problems were identified and categorized, and the Internet was manually searched for authoritative Web sites. The created pediatric digital library (www.generalpediatrics.com) used a problem-based interface and was deployed in November 1999. From November 1999 to November 2000, the number of hyperlinks and authoritative Web sites increased 51.1 and 32.2 percent, respectively. Over the same time, visitors increased by 57.3 percent and overall usage increased by 255 percent. A pediatric digital library has been created that begins to bring order to general pediatric resources on the Internet. This pediatric digital library provides current, authoritative, easily accessed pediatric information whenever and wherever the PHCPs and families want assistance.

Aquatic access for the disabled.

PubMed

Walk, E E; Himel, H N; Batra, E K; Baruch, L; O'Connor, M B; Tanner, A E; Edlich, R F

1992-01-01

Innovations in rehabilitation engineering can now provide aquatic access for the disabled. In the regional burn center, the Bodi-Gard cart shower system (Hospital Therapy Products, Inc., Wood Dale, Ill.) uses three flexible hoses to provide precise hydrotherapy and debridement. Its main mixing valve controls temperature and pressure and is easily disinfected by an in-line chamber. This shower system is complemented by the foldable Bodi-Gard mobile seat shower system (Hospital Therapy Products, Inc.). This system, which is covered by a disposable liner, surrounds the patient with eight water jets that empty into any floor drain. The Bather 2001 (Silcraft Corp., Traverse City, Mich.) is a fiberglass hydrotherapy bathtub with a unique Aqua-Seal door (Silcraft Corp.) that can be raised to provide patient access. Its unique closed-loop disinfection system prevents contamination of its internal components. The Nolan Tublift (Aquatic Access, Louisville, Ky.) is a lightweight, removable lift that uses water power to gently raise and lower its seat. It can be manually swiveled to allow access from a wheelchair. Transfer benches span the tub wall to provide access to the shower and bathtub. Although they are a less expensive alternative to the Tublift, they allow water to spill outside the tub, which may create a slippery bathroom floor. The Nolan Poolift (Guardian Products, Arleta, Calif.) is a water-powered pool lift, which automatically rotates as it descends. It is capable of lifting up to 135 kg with a home water pressure of 55 psi. In contrast, the water-powered Aquatic Access Poolift is a less expensive pool lift, which rotates manually with assistance.(ABSTRACT TRUNCATED AT 250 WORDS)

An Autograding (Student) Problem Management System for the Compeuwtir Ilittur8

NASA Technical Reports Server (NTRS)

Kohne, Glenn S.

1996-01-01

In order to develop analysis skills necessary in engineering disciplines, students need practice solving problems using specified analytical techniques. Unless homework is collected and graded, students tend not to spend much time or effort in performing it. Teachers do not, realistically, have the time to grade large numbers of homework problems on a regular basis. This paper presents and makes available a miracle cure. The Autograding Problem Management System (APMS) provides a discipline-independent mechanism for teachers to create (quickly and easily) sets of homework problems. The APMS system provides CRT and/or printed summaries of the graded student responses. This presentation will demonstrate both the speed and the drag-and-drop simplicity of using the APMS to create self-grading homework problem sets comprised of traditional types of problems and of problems which would not be possible without the use of computers.

Creating a Multimedia Enhanced Problem-Based Learning Environment for Middle School Science: Voices from the Developers

ERIC Educational Resources Information Center

Liu, Min; Horton, Lucas; Lee, Jaejin; Kang, Jina; Rosenblum, Jason; O'Hair, Matthew; Lu, Chu-Wei

2014-01-01

This paper describes the design and development process used to create Alien Rescue, a multimedia-enhanced learning environment that supports problem-based learning (PBL) in middle school science. The goal of the project is to further our understandings of technology, pedagogy, and instructional theories as they relate to the application of PBL…

Teaching helix and problems connected with helix using GeoGebra

NASA Astrophysics Data System (ADS)

Bímová, Daniela

2017-12-01

The contribution presents the dynamic applets created in GeoGebra that show the origin and main properties of a helix and it also presents some constructive problems connected with the helix. There are created the step by step algorithms of some constructions in the chosen applets. Three-dimensional applets include illustrative helix samples and spatial animations that help students better see problems concerning the helix spatially. There is mentioned the website in the contribution on which there is situated GeoGebra book dedicated to the topic "Helix" and containing the mentioned applets. The created applets and materials of the GeoGebra book "Helix" help in teaching and studying the course Constructive Geometry determined for the students of the Faculty of Mechanical Engineering of the Technical University of Liberec.

An automated system for reduction of the firm's employees under maximal overall efficiency

NASA Astrophysics Data System (ADS)

Yonchev, Yoncho; Nikolov, Simeon; Baeva, Silvia

2012-11-01

Achieving maximal overall efficiency is a priority in all companies. This problem is formulated as a knap-sack problem and afterwards as a linear assignment problem. An automated system is created for solving of this problem.

Hear, Hear!

ERIC Educational Resources Information Center

Rittner-Heir, Robbin

2000-01-01

Examines the problem of acoustics in school classrooms; the problems it creates for student learning, particularly for students with hearing problems; and the impediments to achieving acceptable acoustical levels for school classrooms. Acoustic guidelines are explored and some remedies for fixing sound problems are highlighted. (GR)

An Analysis of Secondary and Middle School Teachers' Mathematical Problem Posing

ERIC Educational Resources Information Center

Stickles, Paula R.

2011-01-01

This study identifies the kinds of problems teachers pose when they are asked to (a) generate problems from given information and (b) create new problems from ones given to them. To investigate teachers' problem posting, preservice and inservice teachers completed background questionnaires and four problem-posing instruments. Based on previous…

Lubricant-impregnated surfaces for drag reduction in viscous laminar flow

NASA Astrophysics Data System (ADS)

Solomon, Brian; Khalil, Karim; Varanasi, Kripa; MIT Team

2013-11-01

For the first time, we explore the potential of lubricant impregnated surfaces (LIS) in reducing drag. LIS, inspired by the surface of the Nepenthes pitcher plant, have been introduced as a novel way of functionalizing a surface. LIS are characterized by extremely low contact angle hysteresis and have been show to effectively repel various liquids including water, oils, ketchup and blood. Motivated by the slippery nature of such surfaces, we explore the potential of LIS to reduce drag in internal flows. We observe a reduction in drag for LIS surfaces in a viscous laminar drag flow and model the impact of relevant system parameters (lubricant viscosity, working fluid viscosity, solid fraction, depth of texture, etc.).

Maltreatment of people with serious mental illness in the early 20th century: a focus on Nazi Germany and eugenics in America.

PubMed

Fischer, Bernard A

2012-12-01

Prejudice and stigma against people with mental illness can be seen throughout history. The worst instance of this prejudice was connected to the rise of the eugenics movement in the early 20th century. Although the Nazi German T-4 program of killing people with mental illness was the most egregious culmination of this philosophy, the United States has its own dark eugenics history-nearing a slippery slope all too similar to that of the Nazis. Mental health care clinicians need to examine this period to honor the memory of the victims of eugenics and to guarantee that nothing like this will ever happen again.

Medicolegal Investigations Into Deaths Due to Crush Asphyxia After Tractor Side Rollovers.

PubMed

Moreschi, Carlo; Da Broi, Ugo; Fanzutto, Antonia; Cividino, Sirio; Gubiani, Rino; Pergher, Gianfranco

2017-12-01

Farm tractors are large, heavy, powerful vehicles with a high center of gravity. When driven carelessly on sloping, irregular, or slippery ground, tractors can overturn sideways and cause the death by crush asphyxia of the driver or passengers, especially if appropriate safety equipment is not fitted or used. The aim of this review is to focus on the diagnostic difficulties with which coroners and forensic pathologists have to cope when a confirmation of crush asphyxia after tractor side rollover is required by judicial authorities. Forensic investigations in such cases must involve the meticulous analysis of the death scene and the mechanical characteristics of the vehicle together with accurate postmortem and toxicological examination.

Simulation of OSCM Concepts for HQ SACT

DTIC Science & Technology

2007-06-01

effective method for creating understanding, identifying problems and developing solutions. • Simulation of a goal driven organization is a cost...effective method to visualize some aspects of the problem space Toolbox • The team used Extend™, a COTS product from Imagine That!® (http...Nations flow Model OSCM ATARES flow Batching A/C & Pallets Model ISAF Airbridge flow Flying and unbatching A/C Fleet Create resources Calculate flight

Teaching Pre-Service Teachers to Make Digital Stories That Explain Complex Mathematical Concepts in a Real-World Context: The "Math-eo" Project, Creating "Cool New Tools"

ERIC Educational Resources Information Center

Walters, Lynne Masel; Green, Martha R.; Goldsby, Dianne; Walters, Timothy N.; Wang, Liangyan

2016-01-01

This mixed methods study examines whether engaging in a problem-solving project to create Math-eos (digital videos) increases pre-service teachers' understanding of the relationship between visual, auditory, and verbal representation and critical thinking in mathematics. Additionally, the study looks at what aspects of a digital problem solving…

Primary problems associated with the health and welfare of employees observed when implementing lean manufacturing projects.

PubMed

Rampasso, Izabela Simon; Anholon, Rosley; Gonçalves Quelhas, Osvaldo Luiz; Filho, Walter Leal

2017-01-01

Lean philosophy is used by companies to increase productivity and reduce costs. Although uncontested benefits are created, it is necessary to highlight the problems related to employees' health and welfare caused by implementing lean manufacturing projects. The primary objective of this paper is to review the literature and identify the most relevant problems created by lean philosophy for employees. Research about the theme was performed on many international databases over three months, and an initial sample of 77 papers was found. Twenty-seven sources were utilized. We identified 22 categories of problems related to health and welfare of employees. The most cited problem was work intensification, mentioned by thirteen papers. Increased stress and increased responsibilities, demands and, consequently, pressure on the workers are among the primary problems observed in the research.

Moving Beyond the Debate Over Restricting Sugary Drinks in the Supplemental Nutrition Assistance Program.

PubMed

Schwartz, Marlene B

2017-02-01

To address the dual problem of food insecurity and poor nutrition, the U.S. Department of Agriculture has recently revised the nutrition standards for nearly all of its federal food programs to align with the Dietary Guidelines for Americans. One notable exception is the Supplemental Nutrition Assistance Program (SNAP). Policy proposals to restrict SNAP benefits based on nutrition quality (e.g., excluding sugary drinks) have generated controversy and have polarized previous research and advocacy allies. This essay presents many of the issues that have emerged, which include challenges about the feasibility, justification, and effectiveness of restricting benefits; the risk of a slippery slope; concerns about participant dignity; and finally, distrust about the motives behind promoting and opposing a policy change. The purpose of this review is to increase mutual understanding and respect of different perspectives. The conclusion is that the rationales behind both support and opposition to updating the policies regulating SNAP benefits based on nutrition are fundamentally the same-the belief that a fair and just society cares for and protects vulnerable citizens, which in this case are low-income Americans who need assistance affording healthy food. Recommendations include activities to restore trust between the public health and anti-hunger communities, authentic engagement of SNAP participants in the conversation, and an optional SNAP program that includes both incentives and restrictions. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Liquid-Infused Smooth Surface for Improved Condensation Heat Transfer.

PubMed

Tsuchiya, Hirotaka; Tenjimbayashi, Mizuki; Moriya, Takeo; Yoshikawa, Ryohei; Sasaki, Kaichi; Togasawa, Ryo; Yamazaki, Taku; Manabe, Kengo; Shiratori, Seimei

2017-09-12

Control of vapor condensation properties is a promising approach to manage a crucial part of energy infrastructure conditions. Heat transfer by vapor condensation on superhydrophobic coatings has garnered attention, because dropwise condensation on superhydrophobic surfaces with rough structures leads to favorable heat-transfer performance. However, pinned condensed water droplets within the rough structure and a high thermodynamic energy barrier for nucleation of superhydrophobic surfaces limit their heat-transfer increase. Recently, slippery liquid-infused surfaces (SLIPS) have been investigated, because of their high water sliding ability and surface smoothness originating from the liquid layer. However, even on SLIPS, condensed water droplets are eventually pinned to degrade their heat-transfer properties after extended use, because the rough base layer is exposed as infused liquid is lost. Herein, we report a liquid-infused smooth surface named "SPLASH" (surface with π electron interaction liquid adsorption, smoothness, and hydrophobicity) to overcome the problems derived from the rough structures in previous approaches to obtain stable, high heat-transfer performance. The SPLASH displayed a maximum condensation heat-transfer coefficient that was 175% higher than that of an uncoated substrate. The SPLASH also showed higher heat-transfer performance and more stable dropwise condensation than superhydrophobic surfaces and SLIPS from the viewpoints of condensed water droplet mobility and the thermodynamic energy barrier for nucleation. The effects of liquid-infused surface roughness and liquid viscosity on condensation heat transfer were investigated to compare heat-transfer performance. This research will aid industrial applications using vapor condensation.

Development and testing of item response theory-based item banks and short forms for eye, skin and lung problems in sarcoidosis.

PubMed

Victorson, David E; Choi, Seung; Judson, Marc A; Cella, David

2014-05-01

Sarcoidosis is a multisystem disease that can negatively impact health-related quality of life (HRQL) across generic (e.g., physical, social and emotional wellbeing) and disease-specific (e.g., pulmonary, ocular, dermatologic) domains. Measurement of HRQL in sarcoidosis has largely relied on generic patient-reported outcome tools, with little disease-specific measures available. The purpose of this paper is to present the development and testing of disease-specific item banks and short forms of lung, skin and eye problems, which are a part of a new patient-reported outcome (PRO) instrument called the sarcoidosis assessment tool. After prioritizing and selecting the most important disease-specific domains, we wrote new items to reflect disease-specific problems by drawing from patient focus group and clinician expert survey data that were used to create our conceptual model of HRQL in sarcoidosis. Item pools underwent cognitive interviews by sarcoidosis patients (n = 13), and minor modifications were made. These items were administered in a multi-site study (n = 300) to obtain item calibrations and create calibrated short forms using item response theory (IRT) approaches. From the available item pools, we created four new item banks and short forms: (1) skin problems, (2) skin stigma, (3) lung problems, and (4) eye Problems. We also created and tested supplemental forms of the most common constitutional symptoms and negative effects of corticosteroids. Several new sarcoidosis-specific PROs were developed and tested using IRT approaches. These new measures can advance more precise and targeted HRQL assessment in sarcoidosis clinical trials and clinical practice.

Active Solution Space and Search on Job-shop Scheduling Problem

NASA Astrophysics Data System (ADS)

Watanabe, Masato; Ida, Kenichi; Gen, Mitsuo

In this paper we propose a new searching method of Genetic Algorithm for Job-shop scheduling problem (JSP). The coding method that represent job number in order to decide a priority to arrange a job to Gannt Chart (called the ordinal representation with a priority) in JSP, an active schedule is created by using left shift. We define an active solution at first. It is solution which can create an active schedule without using left shift, and set of its defined an active solution space. Next, we propose an algorithm named Genetic Algorithm with active solution space search (GA-asol) which can create an active solution while solution is evaluated, in order to search the active solution space effectively. We applied it for some benchmark problems to compare with other method. The experimental results show good performance.

The Effectiveness of "Pencasts" in Physics Courses

NASA Astrophysics Data System (ADS)

Weliweriya, Nandana; Sayre, Eleanor C.; Zollman, Dean A.

2018-03-01

Pencasts are videos of problem solving with narration by the problem solver. Pedagogically, students can create pencasts to illustrate their own problem solving to the instructor or to their peers. Pencasts have implications for teaching at multiple levels from elementary grades through university courses. In this article, we describe the use of pencasts in a university-level upper-division electromagnetic fields course usually taken by junior and senior physics majors. For each homework assignment, students created and submitted pencasts of ordinary problems several days before the problem set was due. We compare students' performance in the class (grades for pencast submission excluded) with the pencast submission rate. Students who submitted more pencasts tend to do better in the course. We conclude with some practical suggestions for implementing pencasts in other courses.

Fostering Mathematical Creativity through Problem Posing and Modeling Using Dynamic Geometry: Viviani's Problem in the Classroom

ERIC Educational Resources Information Center

Contreras, José N.

2013-01-01

This paper discusses a classroom experience in which a group of prospective secondary mathematics teachers were asked to create, cooperatively (in class) and individually, problems related to Viviani's problem using a problem-posing framework. When appropriate, students used Sketchpad to explore the problem to better understand its attributes…

Developing Metacognitive and Problem-Solving Skills through Problem Manipulation

ERIC Educational Resources Information Center

Parker Siburt, Claire J.; Bissell, Ahrash N.; Macphail, Richard A.

2011-01-01

In a collaborative effort between the our university's department of chemistry and the academic resource center, we designed a model for general chemistry recitation based on a problem manipulation method in which students actively assess the skills and knowledge used to answer a chemical problem and then manipulate the problem to create a new…

New Approach to Analyzing Physics Problems: A Taxonomy of Introductory Physics Problems

ERIC Educational Resources Information Center

Teodorescu, Raluca E.; Bennhold, Cornelius; Feldman, Gerald; Medsker, Larry

2013-01-01

This paper describes research on a classification of physics problems in the context of introductory physics courses. This classification, called the Taxonomy of Introductory Physics Problems (TIPP), relates physics problems to the cognitive processes required to solve them. TIPP was created in order to design educational objectives, to develop…

Simulation of bacteria transport processes in a river with Flow3D

NASA Astrophysics Data System (ADS)

Schwarzwälder, Kordula; Bui, Minh Duc; Rutschmann, Peter

2014-05-01

Water quality aspects are getting more and more important due to the European water Framework directive (WFD). One problem related to this topic is the inflow of untreated wastewater due to combined sewer overflows into a river. The wastewater mixture contains even bacteria like E. coli and Enterococci which are markers for water quality. In our work we investigated the transport of these bacteria in river Isar by using a large-scale flume in the outside area of our lab (Oskar von Miller Institute). Therefor we could collect basic data and knowledge about the processes which occur during bacteria sedimentation and remobilisation. In our flume we could use the real grain with the exact size distribution curve as in the river Isar which we want to simulate and we had the chance to nurture a biofilm which is realistic for the analysed situation. This biofilm plays an important role in the remobilisation processes, because the bacteria are hindered to be washed out back into the bulk phase as fast and in such an amount as this would happen without biofilm. The results of our experiments are now used for a module in the 3D software Flow3D to simulate the effects of a point source inlet of raw wastewater on the water quality. Therefor we have to implement the bacteria not as a problem of concentration with advection and diffusion but as single particles which can be inactivated during the process of settling and need to be hindered from remobilisation by the biofilm. This biofilm has special characteristic, it is slippery and has a special thickness which influences the chance of bacteria being removed. To achieve realistic results we have to include the biofilm with more than a probabilistic-tool to make sure that our module is transferable. The module should be as flexible as possible to be improved step by step with increasing quality of dataset.

The geological and petrological studies of the subduction boundaries and suggestion for the geological future work in Japan　- How to avoid ultra-mega-earthquakes -

NASA Astrophysics Data System (ADS)

Ishii, T.

2015-12-01

The Pacific plate is surrounded by circum-Pacific active margin, along which volcanic and seismic activities are very high. Ultra-Mega-Earthquakes (=UMEs, M>9.0) are occasionally observed along the margin, where sedimentary rocks of subducting slaves contact with the accreted sedimentary rocks of subducted slaves. But, those UME have never been occured along western Pacific islandarc-trench system including Izu-Ogasawara (=Bonin)-Mariana-Yap-Palau-Philippine-Tonga-Kermadec Trenches. I assume that the geological and petrological characteristics of the subduction boundaries are very important to understand those different seismic activities. Along the above mentioned trench inner wall, especially in the southern Mariana, mantle peridotites are widely distributed. Subducting slave contacts directly with the olivine dominant mantle peridotites of subducted slave, serpentinite layer can be deposited easily under hydrous oceanic sub-bottom environment and very slippery subduction boundaries are left along the subduction zone.On the other hand, those geological evidences give us some ideas on how to avoid UMEs in the Japanese Islands along Japan Trench and Nankai Trough in future. We will be able to change artificially from normal subduction boundaries with asperity zone into slippery subduction boundaries with serpentine layer, by means of serpentine mud injection toward the subduction boundaries interior by combining the following improved drilling technologies A and B. (A) Deep Sea Drilling Vessel CHIKYU has a drilling ability to reach subduction boundary with asperity zone in the Nankai Trough. (B) Advanced drilling technology in the shale gas industry is tremendous, that is, after one vertical deep drilling, horizontal drilling towards several direction are performed, then shale gas is collected by hydraulic fracturing method. I hope that, after several generations, our posterity will be able to avoid UMEs by continuous serpentine mud injection.

EXPECT: Explicit Representations for Flexible Acquisition

NASA Technical Reports Server (NTRS)

Swartout, BIll; Gil, Yolanda

1995-01-01

To create more powerful knowledge acquisition systems, we not only need better acquisition tools, but we need to change the architecture of the knowledge based systems we create so that their structure will provide better support for acquisition. Current acquisition tools permit users to modify factual knowledge but they provide limited support for modifying problem solving knowledge. In this paper, the authors argue that this limitation (and others) stem from the use of incomplete models of problem-solving knowledge and inflexible specification of the interdependencies between problem-solving and factual knowledge. We describe the EXPECT architecture which addresses these problems by providing an explicit representation for problem-solving knowledge and intent. Using this more explicit representation, EXPECT can automatically derive the interdependencies between problem-solving and factual knowledge. By deriving these interdependencies from the structure of the knowledge-based system itself EXPECT supports more flexible and powerful knowledge acquisition.

Meth Mouth, White Trash, and the Pseudo-Racialization of Methamphetamine Use in the U.S.

PubMed

Peterson, Jeffery Chaichana; Gubrium, Aline; Fiddian-Green, Alice

2018-05-07

Drug scares have historically been created for a range of purposes and with a variety of effects in the United States. Moral panics evoked by these drug scares either support or challenge dominant American ideas about race, economics, and society. In the present study, we examined newspaper accounts of methamphetamine use in the Inland Pacific Northwest of the United States in an effort to understand how the "reality" of the "meth epidemic" is socially constructed in a "meth hotspot," and reflect upon the ways that the discourse of Whiteness intersects with this construction. For our analysis, we are cognizant of the "slipperiness" of the logic of Whiteness as a concept, and the ways that an alternative logic is articulated - one that strategically embraces or distances White drug users to support notions of White dominance. We focus on the possibility that individual meth users could then be portrayed pseudo-racially as "White trash," and thus rendered outside the logic of White racial order. Our findings center on two main themes: (1) the use of fear in the construction of the meth drug scare through the sensationalization of meth, its anthropomorphization, and the depiction of the threat of the White drug user; and (2) how the logic of Whiteness is discursively reconciled within this construction. Given current mediated discourses about drug use and health in the United States that center on the emergence of the White drug user as the face of the opioid crisis, we are well served to carefully consider the recent historical precedence of the "meth epidemic" in which the public was faced with reconciling their views about drug use and the intersection of race, class, and mainstream American identity.

Research Mathematicians' Practices in Selecting Mathematical Problems

ERIC Educational Resources Information Center

Misfeldt, Morten; Johansen, Mikkel Willum

2015-01-01

Developing abilities to create, inquire into, qualify, and choose among mathematical problems is an important educational goal. In this paper, we elucidate how mathematicians work with mathematical problems in order to understand this mathematical process. More specifically, we investigate how mathematicians select and pose problems and discuss to…

The Problem Patron: Is There One in Your Library?

ERIC Educational Resources Information Center

Chattoo, Calmer D.

2002-01-01

Discusses the history of problem patrons in libraries and explains various types of problem patrons and their identifying behavior. Highlights include senior citizens; technology-created problems, such as users with cell phones; eccentric behavior; non-compliance with library rules; harassment; intentional bad behavior such as theft; and problems…

Indirection and computer security.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berg, Michael J.

2011-09-01

The discipline of computer science is built on indirection. David Wheeler famously said, 'All problems in computer science can be solved by another layer of indirection. But that usually will create another problem'. We propose that every computer security vulnerability is yet another problem created by the indirections in system designs and that focusing on the indirections involved is a better way to design, evaluate, and compare security solutions. We are not proposing that indirection be avoided when solving problems, but that understanding the relationships between indirections and vulnerabilities is key to securing computer systems. Using this perspective, we analyzemore » common vulnerabilities that plague our computer systems, consider the effectiveness of currently available security solutions, and propose several new security solutions.« less

Video Analysis of a Plucked String: An Example of Problem-based Learning

NASA Astrophysics Data System (ADS)

Wentworth, Christopher D.; Buse, Eric

2009-11-01

Problem-based learning is a teaching methodology that grounds learning within the context of solving a real problem. Typically the problem initiates learning of concepts rather than simply being an application of the concept, and students take the lead in identifying what must be developed to solve the problem. Problem-based learning in upper-level physics courses can be challenging, because of the time and financial requirements necessary to generate real data. Here, we present a problem that motivates learning about partial differential equations and their solution in a mathematical methods for physics course. Students study a plucked elastic cord using high speed digital video. After creating video clips of the cord motion under different tensions they are asked to create a mathematical model. Ultimately, students develop and solve a model that includes damping effects that are clearly visible in the videos. The digital video files used in this project are available on the web at http://physics.doane.edu .

Creating a Learning Space in Problem-Based Learning

ERIC Educational Resources Information Center

Hmelo-Silver, Cindy E.

2013-01-01

An important aspect of PBL problems is the affordances that they hold for engaging students in discussion of important content knowledge. In this paper, I argue that one can analyze a problem in terms of a deep problem space and a broader learning space to identify the conceptual ideas for potential engagement. The problem space refers to the…

A Case Study of an Expert Problem Poser for Mathematics Competitions

ERIC Educational Resources Information Center

Kontorovich, Igor'; Koichu, Boris

2016-01-01

This paper is concerned with organizational principles of a pool of familiar problems of expert problem posers and the ways by which they are utilized for creating new problems. The presented case of Leo is part of a multiple-case study with expert problem posers for mathematics competitions. We present and inductively analyze the data collected…

Superheavy Elements

ERIC Educational Resources Information Center

Tsang, Chin Fu

1975-01-01

Discusses the possibility of creating elements with an atomic number of around 114. Describes the underlying physics responsible for the limited extent of the periodic table and enumerates problems that must be overcome in creating a superheavy nucleus. (GS)

Ethical Dilemmas for Oocyte Donations: Slippery Slope for Conflicts of Interest.

PubMed

Tulay, Pinar

2016-01-01

Oocyte donations have increased with improvements in oocyte cryopreservation procedures in recent years. Women with medical conditions that require chemotherapy or radiotherapy have begun to opt for oocyte cryo¬preservation prior to their treatment or to enroll in an oocyte donation program. Alternatively, some women apply for "third-party" oocyte donation programs for nonmedical reasons such as delayed childbearing. Although society seems to accept oocyte donations for medical reasons, it appears that there are still some moral issues surrounding nonmedical oocyte donations. In this review, the ethical aspects of oocyte donations and donors' perspectives are discussed. With developing technologies, the genetic screening of donors has expanded to include diseases. This review explores the ethical issues involved in genetic screening of gamete donors.

Should selecting saviour siblings be banned?

PubMed

Sheldon, S; Wilkinson, S

2004-12-01

By using tissue typing in conjunction with preimplantation genetic diagnosis doctors are able to pick a human embryo for implantation which, if all goes well, will become a "saviour sibling", a brother or sister capable of donating life-saving tissue to an existing child. This paper addresses the question of whether this form of selection should be banned and concludes that it should not. Three main prohibitionist arguments are considered and found wanting: (a) the claim that saviour siblings would be treated as commodities; (b) a slippery slope argument, which suggests that this practice will lead to the creation of so-called "designer babies"; and (c) a child welfare argument, according to which saviour siblings will be physically and/or psychologically harmed.

Safety on North Carolina and Kentucky trout farms.

PubMed

Ogunsanya, T J; Durborow, R M; Myers, M L; Cole, H P; Thompson, S L

2011-01-01

The objective of this study was to identify and describe work-related safety hazards, injuries, and near-injury events (close calls) that occurred on trout farms in North Carolina and Kentucky. An interview instrument was used to collect information on occupational hazards, injuries, and near-injury events that resulted from work-related activities. Trout farmers reported occupational hazards including falling live tank lids, slippery surfaces on hauling trucks, lifting strains, falls from raceway walls and walkways, needlesticks while vaccinating fish, allergies, hypothermia/drowning, falls from cranes, chemical exposure, fire/explosions related to oxygen exposure, and electrical contact with overhead power lines. This study also reports solutions suggested by farm safety researchers or used by farmers to prevent the safety hazards found on trout farms.

Preliminary test results of the joint FAA-USAF-NASA runway research program. Part 1: Traction measurements of several runways under wet and dry conditions with a Boeing 727, a diagonal-braked vehicle, and a mu-meter

NASA Technical Reports Server (NTRS)

Horne, W. B.; Yager, T. J.; Sleeper, R. K.; Merritt, L. R.

1977-01-01

The stopping distance, brake application velocity, and time of brake application were measured for two modern jet transports, along with the NASA diagonal-braked vehicle and the British Mu-Meter on several runways, which when wetted, cover the range of slipperiness likely to be encountered in the United States. Tests were designed to determine if correlation between the aircraft and friction measuring vehicles exists. The test procedure, data reduction techniques, and preliminary test results obtained with the Boeing 727, the Douglas DC-9, and the ground vehicles are given. Time histories of the aircraft test run parameters are included.

KSC-2009-1511

NASA Image and Video Library

2009-01-31

CAPE CANAVERAL, Fla. – An osprey flies high near the NASA News Center at NASA's Kennedy Space Center in Florida returning to its nest nearby. The osprey, also called fish hawk, is well adapted for capturing fish, which make up its entire diet. The soles of the birds' feet are equipped with sharp, spiny projections that give the bird a firm grip on its slippery prey. Nests of ospreys are bulky masses of sticks and debris placed in a tree, on rocks, flat ground or telephone poles. Many nests exist around the Launch Complex 39 Area at the center. The bird is one of more than 500 species of birds that co-exist at the center and the surrounding Merritt Island National Wildlife Refuge. Photo credit: NASA/Ben Smelgelsky

Ocular myasthenia gravis accompanied by anosmia.

PubMed

Chen, Ying; Wang, Li; Zhou, Li; Gao, Ying

2016-02-01

We report a case of ocular myasthenia gravis (MG) accompanied by anosmia. A 76-year-old man had idiopathic anosmia of 2-year duration. Four months before consultation, he began to have drooping in the right upper eyelid along with muscle soreness, distension, and pain in the nape. His tongue was dark-red with a thin and white coating; his pulse was wiry and slippery. According to Traditional Chinese Medicine, eyelid drooping and anosmia are the main signs of liver constraint and spleen deficiency. In Western Medicine, the diagnosis was ocular MG and idiopathic anosmia. Our patient, along with the literature, suggests that anosmia may be an early symptom before MG. MG accompanied by anosmia could be a special subtype of MG according to antibody production and symptoms.

Euthanasia: a reply to Bartels and Otlowski.

PubMed

Prichard, Jeremy

2012-03-01

This article counters arguments made by Bartels and Otlowski in 2010 regarding euthanasia. It suggests that the authors over-emphasised the importance of individual autonomy in its bearing on the euthanasia debate. Drawing on literature concerning elder abuse as well as the "mercy-killing" cases reviewed by Bartels and Otlowski, the article contends that legalising euthanasia may increase the risk that some patients are pressured, inadvertently or deliberately, to request access. Safeguards to detect and deter pressure may be of limited effectiveness against such pressure. Regarding slippery slope arguments, the article discusses the potential for an Australian euthanasia system to eventually be extended in scope to encompass mental suffering. The article encourages consideration of long-term potentialities, including changes in macro-economic conditions.

A Good Beginning

NASA Astrophysics Data System (ADS)

Sayre, W. G.; Sayre, Nancy E.

1999-05-01

The first-period activity in the classroom is critical for success in the general chemistry course. Past first-day activities at Slippery Rock University have included administering the Toledo test or an in-house mathematics readiness test to help the students understand their degree of readiness for the course. In the past students with poor preparation were shunted into a prep chem course. If no tests were administered then the students received the "this is a university-level course-you must work hard, etc." lecture. This fall the first-period activity was shifted from the intellectual readiness or hard work focus to a behavioral/attitude activity. This resulted in the best performance on the first hour exam in ten years, 2.1 times better than the previous best performance.

Protective Coatings

NASA Technical Reports Server (NTRS)

1980-01-01

General Magnaplate Corporation's pharmaceutical machine is used in the industry for high speed pressing of pills and capsules. Machine is automatic system for molding glycerine suppositories. These machines are typical of many types of drug production and packaging equipment whose metal parts are treated with space spinoff coatings that promote general machine efficiency and contribute to compliance with stringent federal sanitation codes for pharmaceutical manufacture. Collectively known as "synergistic" coatings, these dry lubricants are bonded to a variety of metals to form an extremely hard slippery surface with long lasting self lubrication. The coatings offer multiple advantages; they cannot chip, peel or be rubbed off. They protect machine parts from corrosion and wear longer, lowering maintenance cost and reduce undesired heat caused by power-robbing friction.

Medicines counterfeiting is a complex problem: a review of key challenges across the supply chain.

PubMed

Tremblay, Michael

2013-02-01

The paper begins by asking why there is a market for counterfeit medicines, which in effect creates the problem of counterfeiting itself. Contributing factors include supply chain complexity and the lack of whole-systems thinking. These two underpin the author's view that counterfeiting is a complex (i.e. wicked) problem, and that corporate, public policy and regulatory actions need to be mindful of how their actions may be causal. The paper offers a problem-based review of key components of this complexity, viz., the knowledge end-users/consumers have of medicines; whether restrictive information policies may hamper information provision to patients; the internet's direct access to consumers; internet-enabled distribution of unsafe and counterfeit medicines; whether the internet is a parallel and competitive supply chain to legitimate routes; organised crime as an emerging medicines manufacturer and supplier and whether substandard medicines is really the bigger problem. Solutions respect the perceived complexity of the supply chain challenges. The paper identifies the need to avoid technologically-driven solutions, calling for 'technological agnosticism'. Both regulation and public policy need to reflect the dynamic nature of the problem and avoid creating perverse incentives; it may be, for instance, that medicines pricing and reimbursement policies, which affect consumer/patient access may act as market signals to counterfeiters, since this creates a cash market in cheaper drugs.

The importance of production standard operating procedure in a family business company

NASA Astrophysics Data System (ADS)

Hongdiyanto, C.

2017-12-01

Plastic industry is a growing sector, therefore UD X which engage in this business has a great potential to grow as well. The problem faced by this family business company is that no standard operating procedure is used and it lead to problem in the quality and quantity produced. This research is aim to create a production standard operating procedure for UD X. Semistructure interview is used to gather information from respondent to help writer create the SOP. There are four SOP’s created, namely: classifying SOP, sorting SOP, milling SOP and packing SOP. Having SOP will improve the effectiveness of production because employees already know how to work in each stages of production process.

Instructional Designers' Media Selection Practices for Distributed Problem-Based Learning Environments

ERIC Educational Resources Information Center

Fells, Stephanie

2012-01-01

The design of online or distributed problem-based learning (dPBL) is a nascent, complex design problem. Instructional designers are challenged to effectively unite the constructivist principles of problem-based learning (PBL) with appropriate media in order to create quality dPBL environments. While computer-mediated communication (CMC) tools and…

What's the Right Answer? Team Problem-Solving in Environments of Uncertainty

ERIC Educational Resources Information Center

Jameson, Daphne A.

2009-01-01

Whether in the workplace or the classroom, many teams approach problem-solving as a search for certainty--even though certainty rarely exists in business. This search for the one right answer to a problem creates unrealistic expectations and often undermines teams' effectiveness. To help teams manage their problem-solving process and communication…

Problem Analysis: Challenging All Learners

ERIC Educational Resources Information Center

Garcia, Katie; Davis, Alicia

2013-01-01

In this article, Garcia and Davis describe problem analysis as the process of examining a given mathematics exercise to find ways in which the problem can be modified and extended to create a richer learning opportunity for students. Students are often reluctant to attempt what they perceive to be higher-order thinking problems, but problem…

The Students Decision Making in Solving Discount Problem

ERIC Educational Resources Information Center

Abdillah; Nusantara, Toto; Subanji; Susanto, Hery; Abadyo

2016-01-01

This research is reviewing students' process of decision making intuitively, analytically, and interactively. The research done by using discount problem which specially created to explore student's intuition, analytically, and interactively. In solving discount problems, researcher exploring student's decision in determining their attitude which…

Proposal for Land Consolidation Project Solutions for Selected Problem Areas

NASA Astrophysics Data System (ADS)

Wojcik-Len, Justyna; Strek, Zanna

2017-12-01

One of the economic tools for supporting agricultural policy are the activities implemented under the Rural Development Program (RDP). By encouraging agricultural activities and creating equal opportunities for development of farms, among others in areas with unfavourable environmental conditions characterized by low productivity of soils exposed to degradation, decision makers can contribute to improving the spatial structure of rural areas. In Poland, one of the major concerns are agricultural problem areas (regions). In view of this situation, the aim of this article was to characterize the problem areas in question and propose land consolidation project solutions for selected fragments of those areas. This paper presents the results of a review of literature and an analysis of geodetic and cartographic data regarding the problem areas. The process of land consolidation, which is one of the technical and legal instruments supporting the development of rural areas, was characterized. The study allowed the present authors to establish criteria for selecting agricultural problem areas for land consolidation. To develop a proposal for rational management of the problem areas, key general criteria (location, topography, soil quality and usefulness) and specific criteria were defined and assigned weights. A conception of alternative development of the agricultural problem areas was created as part of a land consolidation project. The results were used to create a methodology for the development of agricultural problem areas to be employed during land consolidation in rural areas. Every agricultural space includes areas with unfavourable environmental and soil conditions determined by natural or anthropogenic factors. Development of agricultural problem areas through land consolidation should take into account the specific functions assigned to these areas in land use plans, as well as to comply with legal regulations.

International Health

MedlinePlus

... create refugee populations with immediate and long-term health problems. Some of the major diseases currently affecting ... also an international problem which can affect people's health. Many countries and health organizations are working together ...

ALPS: A Linear Program Solver

NASA Technical Reports Server (NTRS)

Ferencz, Donald C.; Viterna, Larry A.

1991-01-01

ALPS is a computer program which can be used to solve general linear program (optimization) problems. ALPS was designed for those who have minimal linear programming (LP) knowledge and features a menu-driven scheme to guide the user through the process of creating and solving LP formulations. Once created, the problems can be edited and stored in standard DOS ASCII files to provide portability to various word processors or even other linear programming packages. Unlike many math-oriented LP solvers, ALPS contains an LP parser that reads through the LP formulation and reports several types of errors to the user. ALPS provides a large amount of solution data which is often useful in problem solving. In addition to pure linear programs, ALPS can solve for integer, mixed integer, and binary type problems. Pure linear programs are solved with the revised simplex method. Integer or mixed integer programs are solved initially with the revised simplex, and the completed using the branch-and-bound technique. Binary programs are solved with the method of implicit enumeration. This manual describes how to use ALPS to create, edit, and solve linear programming problems. Instructions for installing ALPS on a PC compatible computer are included in the appendices along with a general introduction to linear programming. A programmers guide is also included for assistance in modifying and maintaining the program.

Investigating gender differences in alcohol problems: a latent trait modeling approach.

PubMed

Nichol, Penny E; Krueger, Robert F; Iacono, William G

2007-05-01

Inconsistent results have been found in research investigating gender differences in alcohol problems. Previous studies of gender differences used a wide range of methodological techniques, as well as limited assortments of alcohol problems. Parents (1,348 men and 1,402 women) of twins enrolled in the Minnesota Twin Family Study answered questions about a wide range of alcohol problems. A latent trait modeling technique was used to evaluate gender differences in the probability of endorsement at the problem level and for the overall 105-problem scale. Of the 34 problems that showed significant gender differences, 29 were more likely to be endorsed by men than women with equivalent overall alcohol problem levels. These male-oriented symptoms included measures of heavy drinking, duration of drinking, tolerance, and acting out behaviors. Nineteen symptoms were denoted for removal to create a scale that favored neither gender in assessment. Significant gender differences were found in approximately one-third of the symptoms assessed and in the overall scale. Further examination of the nature of gender differences in alcohol problem symptoms should be undertaken to investigate whether a gender-neutral scale should be created or if men and women should be assessed with separate criteria for alcohol dependence and abuse.

Problem Solving on a Monorail.

ERIC Educational Resources Information Center

Barrow, Lloyd H.; And Others

1994-01-01

This activity was created to address a lack of problem-solving activities for elementary children. A "monorail" activity from the Evening Science Program for K-3 Students and Parents program is presented to illustrate the problem-solving format. Designed for performance at stations by groups of two students. (LZ)

Visualization for Hyper-Heuristics. Front-End Graphical User Interface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kroenung, Lauren

Modern society is faced with ever more complex problems, many of which can be formulated as generate-and-test optimization problems. General-purpose optimization algorithms are not well suited for real-world scenarios where many instances of the same problem class need to be repeatedly and efficiently solved because they are not targeted to a particular scenario. Hyper-heuristics automate the design of algorithms to create a custom algorithm for a particular scenario. While such automated design has great advantages, it can often be difficult to understand exactly how a design was derived and why it should be trusted. This project aims to address thesemore » issues of usability by creating an easy-to-use graphical user interface (GUI) for hyper-heuristics to support practitioners, as well as scientific visualization of the produced automated designs. My contributions to this project are exhibited in the user-facing portion of the developed system and the detailed scientific visualizations created from back-end data.« less

How to get paid for having fun.

PubMed

Koshland, D E

1996-01-01

As I look back, I am still amazed that I was actually paid to do something I loved and others could describe as work. Yet my situation is no different from that of most scientists who find that they are asked to pursue their innate curiosity to solve puzzles, the solutions to which fortunately are of value to society. I enjoyed the beautiful logic of mathematics in elementary grades and was entranced by the exciting solution of puzzles described by DeKruif. So I drifted into the scientific profession without a clear idea of what to do or how to do it. Each experience prepared my mind and supplied the base for the next job, creating what was for me a smooth flow from scientist to professor to editor to scientist. Fortunately for me and fellow scientists the problems of the world never disappear. "The one who rides the tiger can never get off" is an aphorism that expresses society's dependence on science. Automobiles improve transportation and create pollution, medical advantages prolong life and create over-population, pesticides bring cheaper food and create soil problems. Each advance brings on the need for more science to solve the new problems. Society, which likes to live well, is addicted to the products of science, and fortunately a peculiar set of humans are addicted to solving the problems. I am one of those typical addicts who finds the obstacle course fascinating and the endlessness of the quest utopia.

A Delivery System to Meet the Staff Development Needs of Rural Schools.

ERIC Educational Resources Information Center

Gould, Marvin W.; Harris, Donna

1988-01-01

The educational reform movement has resulted in staff development requirements which have created implementation problems for rural schools. The educational cooperative provides a solution to these implementation problems. (JD)

Conceptualizing Perseverance in Problem Solving as Collective Enterprise

ERIC Educational Resources Information Center

Sengupta-Irving, Tesha; Agarwal, Priyanka

2017-01-01

Students are expected to learn mathematics such that when they encounter challenging problems they will persist. Creating opportunities for students to persist in problem solving is therefore argued as essential to effective teaching and to children developing positive dispositions in mathematical learning. This analysis takes a novel approach to…

Introductory Level Problems Illustrating Concepts in Pharmaceutical Engineering

ERIC Educational Resources Information Center

McIver, Keith; Whitaker, Kathryn; De Delva, Vladimir; Farrell, Stephanie; Savelski, Mariano J.; Slater, C. Stewart

2012-01-01

Textbook style problems including detailed solutions introducing pharmaceutical topics at the level of an introductory chemical engineering course have been created. The problems illustrate and teach subjects which students would learn if they were to pursue a career in pharmaceutical engineering, including the unique terminology of the field,…

Thinking Deeply about Area and Perimeter

ERIC Educational Resources Information Center

Nirode, Wayne

2011-01-01

While contemplating ways to extend the author's ninth-grade honors geometry students' thinking and knowledge about area and perimeter, he discovered an interesting type of problem based on Erickson's (2001) rectangle problem, which he had been using for ten years. Erickson's original problem involves creating random rectangles with lengths and…

Solving Optimization Problems with Spreadsheets

ERIC Educational Resources Information Center

Beigie, Darin

2017-01-01

Spreadsheets provide a rich setting for first-year algebra students to solve problems. Individual spreadsheet cells play the role of variables, and creating algebraic expressions for a spreadsheet to perform a task allows students to achieve a glimpse of how mathematics is used to program a computer and solve problems. Classic optimization…

The Effectiveness of "Pencasts" in Physics Courses

ERIC Educational Resources Information Center

Weliweriya, Nandana; Sayre, Eleanor C.; Zollman, Dean A.

2018-01-01

Pencasts are videos of problem solving with narration by the problem solver. Pedagogically, students can create pencasts to illustrate their own problem solving to the instructor or to their peers. Pencasts have implications for teaching at multiple levels from elementary grades through university courses. In this article, we describe the use of…

44 CFR Appendix 1 to Part 323 - List of Essential Survival Items

Code of Federal Regulations, 2011 CFR

2011-10-01

... disclose critical deficiencies or other problems that can be anticipated. Revisions will be made as... months following an attack, not all of them would create problems that would require government action... identify the problem areas. In developing supply data, all available production capacity, existing...

Using a Genetic Algorithm to Learn Behaviors for Autonomous Vehicles,

DTIC Science & Technology

1992-08-12

Truly autonomous vehicles will require both projective planning and reactive components in order to perform robustly. Projective components are...long time period. This work addresses the problem of creating reactive components for autonomous vehicles . Creating reactive behaviors (stimulus

Flowing toward Correct Contributions during Group Problem Solving: A Statistical Discourse Analysis

ERIC Educational Resources Information Center

Chiu, Ming Ming

2008-01-01

Groups that created more correct ideas (correct contributions or CCs) might be more likely to solve a problem, and students' recent actions (micro-time context) might aid CC creation. 80 high school students worked in groups of 4 on an algebra problem. Groups with higher mathematics grades or more CCs were more likely to solve the problem. Dynamic…

Problem-Posing Strategies Used by Years 8 and 9 Students

ERIC Educational Resources Information Center

Stoyanova, Elena

2005-01-01

According to Kilpatrick (1987), in the mathematics classrooms problem posing can be applied as a "goal" or as a means of instruction. Using problem posing as a goal of instruction involves asking students to respond to a range of problem-posing prompts. The main goal of this article is a classification of mathematics questions created by Years 8…

Anencephalics as organ sources.

PubMed

Sytsma, S E

1996-03-01

In recent years, the need for infant organs for transplantation has increased. There is a growing recognition of the potential use of anencephalics as sources of organs. Prevalent arguments defending the use of live anencephalics for organ sources are identified and criticized. I argue that attempts to deny the applicability of the "dead-donor rule" are either question-begging or based on false premises and that attempts to skirt the Kantian dictum against treating others as a means only are not successful. I contend that the apparent utilitarian justification for live anencephalics as organ sources is unsatisfactory for two reasons: first, because it ignores the undermining effect the policy would have on parental values and sentiments central to social welfare; and second, because attempts to respond adequately to the slippery slope argument against live anencephalic use are unconvincing.

[Glass ceiling and slippery stairs? Gender inequalities and strategies for change in the Spanish Society of Public Health and Health Services Administration].

PubMed

Colomer Revuelta, C; Peiró Pérez, R

2002-01-01

In scientific societies, as in other social fields, women's participation in decision making is lower than that of men. We describe the situation in SESPAS (Spanish Society of Public Health and Health Services Administration) where, despite representing a 40% of its members, very few women have been in positions in which decisions are taken or in those of professional recognition. The process of change implemented during recent years and some of the effects of the actions taken are presented. Making the existing inequalities known has generated debate and interest in the intervention. A gender and public health working group was set up. In the last two years more women have been promoted to more senior positions in SESPAS.

[LESSONS FROM PREPAREDNESS OF HOSPITALS TO SNOWSTORMS].

PubMed

Merin, Ofer; Goldberg, Sara; Peyser, Amos; Gros, Moshe; Weiss, Gali; Bitan, Aria; Zarka, Salman; Shapira, Kelin

2015-11-01

Snowstorms are not a usual scene in Israel, which normally enjoys relatively warm weather, even in the winter. In the last two years we faced three severe snowstorms that had a major impact on the routine daily life in Israel. Roads were blocked, people experienced long electricity power failures, and secondary to slippery conditions, there was more than a threefold increase of orthopedic injuries. These storms confronted hospitals with unique challenges, both medical and logistic. Hospitals must be prepared to cope with the challenge of maintaining continuation of care. We propose four phases of preparedness strategy: at the beginning of the winter, once there is a weather forecast warning, during the storm itself, and returning to norm. This manuscript deals with the lessons learned by two hospitals in Safed and Jerusalem dealing with snowstorms.

KSC-2009-1513

NASA Image and Video Library

2009-01-31

CAPE CANAVERAL, Fla. – Near the NASA News Center at NASA's Kennedy Space Center in Florida, the osprey prepares to land on a pole with its meal in its talons. The osprey, also called fish hawk, is well adapted for capturing fish, which make up its entire diet. The soles of the birds' feet are equipped with sharp, spiny projections that give the bird a firm grip on its slippery prey. Nests of ospreys are bulky masses of sticks and debris placed in a tree, on rocks, flat ground or telephone poles. Many nests exist around the Launch Complex 39 Area at the center. The bird is one of more than 500 species of birds that co-exist at the center and the surrounding Merritt Island National Wildlife Refuge. Photo credit: NASA/Ben Smelgelsky

KSC-2009-1510

NASA Image and Video Library

2009-01-31

CAPE CANAVERAL, Fla. – An osprey carries its food in its talons as it flies to its nest near the NASA News Center at NASA's Kennedy Space Center in Florida. The osprey, also called fish hawk, is well adapted for capturing fish, which make up its entire diet. The soles of the birds' feet are equipped with sharp, spiny projections that give the bird a firm grip on its slippery prey. Nests of ospreys are bulky masses of sticks and debris placed in a tree, on rocks, flat ground or telephone poles. Many nests exist around the Launch Complex 39 Area at the center. The bird is one of more than 500 species of birds that co-exist at the center and the surrounding Merritt Island National Wildlife Refuge. Photo credit: NASA/Ben Smelgelsky

Euthanasia in The Netherlands.

PubMed Central

van der Wal, G.; Dillmann, R. J.

1994-01-01

The practice of euthanasia in the Netherlands is often used as an argument in debates outside the Netherlands--hence a clear description of the Dutch situation is important. This article summarises recent data and discusses conceptual issues and relevant characteristics of the system of health care. Special emphasis is put on regulation, including relevant data on notification and prosecution. Besides the practice of euthanasia the Dutch are confronted with the gaps in reporting of cases to the public prosecutor and the existence of cases of ending a life without an explicit request. Nevertheless, the "Dutch experiment" need not inevitably lead down the slippery slope because of the visibility and openness of this part of medical practice. This will lead to increased awareness, more safeguards, and improvement of medical decisions concerning the end of life. PMID:8019226

Euthanasia in The Netherlands.

PubMed

van der Wal, G; Dillmann, R J

1994-05-21

The practice of euthanasia in the Netherlands is often used as an argument in debates outside the Netherlands--hence a clear description of the Dutch situation is important. This article summarises recent data and discusses conceptual issues and relevant characteristics of the system of health care. Special emphasis is put on regulation, including relevant data on notification and prosecution. Besides the practice of euthanasia the Dutch are confronted with the gaps in reporting of cases to the public prosecutor and the existence of cases of ending a life without an explicit request. Nevertheless, the "Dutch experiment" need not inevitably lead down the slippery slope because of the visibility and openness of this part of medical practice. This will lead to increased awareness, more safeguards, and improvement of medical decisions concerning the end of life.

PSYCHOANALYSIS AND THE ARTS: THE SLIPPERY GROUND OF APPLIED ANALYSIS.

PubMed

Abella, Adela

2016-01-01

The ways in which today's psychoanalysts approach art closely follow the avenues opened by Freud a hundred years ago. Drawing mainly on Freud's studies on Jensen's Gradiva (1907) and on Leonardo da Vinci (1910a), the author examines the main paradigms he used in discussing artistic activity, including his doubts and hesitations. Present-day approaches to art are then examined via a discussion of the advantages and pitfalls of psychobiography, of the case study, and of textual approaches. The author makes a case for the type of interdisciplinary dialogue in which the goal is to establish a cross-fertilization between psychoanalysis and other fields of knowledge while striving to avoid hypersaturation of a work of art in order to foster expansion of the mind. © 2016 The Psychoanalytic Quarterly, Inc.

An overview of the joint FAA/NASA aircraft/ground runway friction program

NASA Technical Reports Server (NTRS)

Yager, Thomas J.

1989-01-01

There is a need for information on runways which may become slippery due to various forms and types of contaminants. Experience has shown that since the beginning of all weather aircraft operations, there have been landing and aborted takeoff incidents and/or accidents each year where aircraft have either run off the end or veered off the shoulder of low friction runways. NASA Langley's Landing and Impact Dynamics Branch is involved in several research programs directed towards obtaining a better understanding of how different tire properties interact with varying pavement surface characteristics to produce acceptable performance for aircraft ground handling requirements. One such effort, which was jointly supported by not only NASA and the FAA but by several aviation industry groups including the Flight Safety Foundation, is described.

Problem Based Learning (PBL) - An Effective Approach to Improve Learning Outcomes in Medical Teaching.

PubMed

Preeti, Bajaj; Ashish, Ahuja; Shriram, Gosavi

2013-12-01

As the "Science of Medicine" is getting advanced day-by-day, need for better pedagogies & learning techniques are imperative. Problem Based Learning (PBL) is an effective way of delivering medical education in a coherent, integrated & focused manner. It has several advantages over conventional and age-old teaching methods of routine. It is based on principles of adult learning theory, including student's motivation, encouragement to set goals, think critically about decision making in day-to-day operations. Above all these, it stimulates challenge acceptance and learning curiosity among students and creates pragmatic educational program. To measure the effectiveness of the "Problem Based Learning" as compared to conventional theory/didactic lectures based learning. The study was conducted on 72 medical students from Dayanand Medical College & Hospital, Ludhiana. Two modules of problem based sessions designed and delivered. Pre & Post-test score's scientific statistical analysis was done. Student feed-back received based on questionnaire in the five-point Likert scale format. Significant improvement in overall performance observed. Feedback revealed majority agreement that "Problem-based learning" helped them create interest (88.8 %), better understanding (86%) & promotes self-directed subject learning (91.6 %). Substantial improvement in the post-test scores clearly reveals acceptance of PBL over conventional learning. PBL ensures better practical learning, ability to create interest, subject understanding. It is a modern-day educational strategy, an effective tool to objectively improve the knowledge acquisition in Medical Teaching.

V/STOL Concepts and Developed Aircraft. Volume 1. A Historical Report (1940-1986)

DTIC Science & Technology

1986-06-26

in this - direction. Generally, the propellants considered for use create logistic, safety and operational cost problems. Further, the very high...been expanded into multiplace transpcrt devices. The operational use of the individual lift systems creates an important distinction between them in...two separate, alternate thrust vectoring means tc control horizontal translational flight with attitude stabilization being created by the flier’s

I think I have a good idea: what do I do with it?

PubMed

Brigido, Stephen A

2011-08-01

The orthopaedic device industry is an ever changing market, often guided by creative surgeons who have the common goal of creating a solution to a problem. While being a surgeon-inventor can be both a challenging and rewarding process, there are several steps that the individual must follow to create intellectual property. This article serves as a guide to the novice surgeon-inventor; intended to be used as an early stage reference for those interested in taking their "solution to a problem" to the device industry.

Gaming Against Violence: A Grassroots Approach to Teen Dating Violence.

PubMed

Crecente, Drew

2014-08-01

Teen dating violence is a pervasive problem that affects millions of adolescents worldwide. Although there have been various approaches to addressing this problem, using videogames had not been employed before 2008, when Jennifer Ann's Group, an Atlanta, GA-based nonprofit organization, created an annual competition. The Life.Love. Game Design Challenge rewards game developers for creating videogames about teen dating violence without using any violence in the games themselves. The resulting videogames have increased awareness about teen dating violence and provided educational information to assist adolescents, parents, and teachers in identifying abusive relationships.

Student Activity Funds: Procedures & Controls.

ERIC Educational Resources Information Center

Cuzzetto, Charles E.

Student activity funds may create educational opportunities for students, but they frequently create problems for business administrators. The first part of this work reviews the types of organizational issues and transactions an organized student group is likely to encounter, including establishing a constitution, participant roles,…

Routine human-competitive machine intelligence by means of genetic programming

NASA Astrophysics Data System (ADS)

Koza, John R.; Streeter, Matthew J.; Keane, Martin

2004-01-01

Genetic programming is a systematic method for getting computers to automatically solve a problem. Genetic programming starts from a high-level statement of what needs to be done and automatically creates a computer program to solve the problem. The paper demonstrates that genetic programming (1) now routinely delivers high-return human-competitive machine intelligence; (2) is an automated invention machine; (3) can automatically create a general solution to a problem in the form of a parameterized topology; and (4) has delivered a progression of qualitatively more substantial results in synchrony with five approximately order-of-magnitude increases in the expenditure of computer time. Recent results involving the automatic synthesis of the topology and sizing of analog electrical circuits and controllers demonstrate these points.

SPLICER - A GENETIC ALGORITHM TOOL FOR SEARCH AND OPTIMIZATION, VERSION 1.0 (MACINTOSH VERSION)

NASA Technical Reports Server (NTRS)

Wang, L.

1994-01-01

SPLICER is a genetic algorithm tool which can be used to solve search and optimization problems. Genetic algorithms are adaptive search procedures (i.e. problem solving methods) based loosely on the processes of natural selection and Darwinian "survival of the fittest." SPLICER provides the underlying framework and structure for building a genetic algorithm application. These algorithms apply genetically-inspired operators to populations of potential solutions in an iterative fashion, creating new populations while searching for an optimal or near-optimal solution to the problem at hand. SPLICER 1.0 was created using a modular architecture that includes a Genetic Algorithm Kernel, interchangeable Representation Libraries, Fitness Modules and User Interface Libraries, and well-defined interfaces between these components. The architecture supports portability, flexibility, and extensibility. SPLICER comes with all source code and several examples. For instance, a "traveling salesperson" example searches for the minimum distance through a number of cities visiting each city only once. Stand-alone SPLICER applications can be used without any programming knowledge. However, to fully utilize SPLICER within new problem domains, familiarity with C language programming is essential. SPLICER's genetic algorithm (GA) kernel was developed independent of representation (i.e. problem encoding), fitness function or user interface type. The GA kernel comprises all functions necessary for the manipulation of populations. These functions include the creation of populations and population members, the iterative population model, fitness scaling, parent selection and sampling, and the generation of population statistics. In addition, miscellaneous functions are included in the kernel (e.g., random number generators). Different problem-encoding schemes and functions are defined and stored in interchangeable representation libraries. This allows the GA kernel to be used with any representation scheme. The SPLICER tool provides representation libraries for binary strings and for permutations. These libraries contain functions for the definition, creation, and decoding of genetic strings, as well as multiple crossover and mutation operators. Furthermore, the SPLICER tool defines the appropriate interfaces to allow users to create new representation libraries. Fitness modules are the only component of the SPLICER system a user will normally need to create or alter to solve a particular problem. Fitness functions are defined and stored in interchangeable fitness modules which must be created using C language. Within a fitness module, a user can create a fitness (or scoring) function, set the initial values for various SPLICER control parameters (e.g., population size), create a function which graphically displays the best solutions as they are found, and provide descriptive information about the problem. The tool comes with several example fitness modules, while the process of developing a fitness module is fully discussed in the accompanying documentation. The user interface is event-driven and provides graphic output in windows. SPLICER is written in Think C for Apple Macintosh computers running System 6.0.3 or later and Sun series workstations running SunOS. The UNIX version is easily ported to other UNIX platforms and requires MIT's X Window System, Version 11 Revision 4 or 5, MIT's Athena Widget Set, and the Xw Widget Set. Example executables and source code are included for each machine version. The standard distribution media for the Macintosh version is a set of three 3.5 inch Macintosh format diskettes. The standard distribution medium for the UNIX version is a .25 inch streaming magnetic tape cartridge in UNIX tar format. For the UNIX version, alternate distribution media and formats are available upon request. SPLICER was developed in 1991.

Modeling Students' Problem Solving Performance in the Computer-Based Mathematics Learning Environment

ERIC Educational Resources Information Center

Lee, Young-Jin

2017-01-01

Purpose: The purpose of this paper is to develop a quantitative model of problem solving performance of students in the computer-based mathematics learning environment. Design/methodology/approach: Regularized logistic regression was used to create a quantitative model of problem solving performance of students that predicts whether students can…

Integrative Problem-Centered Therapy: Toward the Synthesis of Family and Individual Psychotherapies.

ERIC Educational Resources Information Center

Pinsof, William M.

1983-01-01

Presents an overview of the Integrative Problem-Centered Therapy (IPCT) Model, and describes its core principles and premises, and basic methodological steps. The IPCT provides a technique for applying individual and family therapy and behavioral, communicational, and psychodynamic orientations to client problems. Its goal is to create efficient…

Why Organizations Continue to Create Patient Information Leaflets with Readability and Usability Problems: An Exploratory Study

ERIC Educational Resources Information Center

Gal, Iddo; Prigat, Ayelet

2005-01-01

Readability and usability problems with patient information leaflets continue to be reported despite long-standing recognition of their existence and the availability of guidelines for developing health education materials. This exploratory study examined possible causes for such problems, based on interviews with professionals who developed…

Use of Problem-Based Learning in the Teaching and Learning of Horticultural Production

ERIC Educational Resources Information Center

Abbey, Lord; Dowsett, Eric; Sullivan, Jan

2017-01-01

Purpose: Problem-based learning (PBL), a relatively novel teaching and learning process in horticulture, was investigated. Proper application of PBL can potentially create a learning context that enhances student learning. Design/Methodology/Approach: Students worked on two complex ill-structured problems: (1) to produce fresh baby greens for a…

The Controversial Classroom: Institutional Resources and Pedagogical Strategies for a Race Relations Course.

ERIC Educational Resources Information Center

Wahl, Ana-Maria; Perez, Eduardo T.; Deegan, Mary Jo; Sanchez, Thomas W.; Applegate, Cheryl

2000-01-01

Offers a model for a collective strategy that can be used to deal more effectively with problems associated with race relations courses. Presents a multidimensional analysis of the constraints that create problems for race relations instructors and highlights a multidimensional approach to minimizing these problems. Includes references. (CMK)

76 FR 69052 - Final Response to Petition From New Jersey Regarding SO2

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

...) and section 126--to address the problem of interstate pollution transport. The purpose of each... maintenance problems. The two provisions differ in that one relies on state regulation and the other relies on..., the statutory language creates two independent tools to address the problem. Section 110(a)(2)(D)(i...

Cooperative Efforts in Fuels Management

Treesearch

Gerald L. Adams

1995-01-01

Our forests have been neglected or protected to death, creating an extreme wildfire risk in wildland urban intermix communities. We as agencies and organizations are just now beginning to understand that the fuel problems we have across the western states are not a single agency problem, but "our problem." Wildfires do not respect boundaries, be they...

A New Algorithm to Create Balanced Teams Promoting More Diversity

ERIC Educational Resources Information Center

Dias, Teresa Galvão; Borges, José

2017-01-01

The problem of assigning students to teams can be described as maximising their profiles diversity within teams while minimising the differences among teams. This problem is commonly known as the maximally diverse grouping problem and it is usually formulated as maximising the sum of the pairwise distances among students within teams. We propose…

Application of Model-Based Systems Engineering (MBSE) to Compare Legacy and Future Forces in Mine Warfare (MIW) Missions

DTIC Science & Technology

2014-12-01

model the list is sorted by using a “nearest neighbor” ap- proach as a solution to the “ traveling salesman problem ” to create a list of targets in the...2 B. PROBLEM .......................................................................................................3 C. APPROACH...54 4. Problem Statement.............................................................................54 C. REQUIREMENTS

Creating Problem-Based Leadership Learning across the Curriculum

ERIC Educational Resources Information Center

Thompson, Sara E.; Couto, Richard A.

2016-01-01

This chapter explores problem-based learning (PBL) as effective pedagogy to enhance leadership learning. Through institutional examples, research, and personal experiences, the authors provide a rationale for faculty and staff to utilize PBL across the curriculum.

Advertising Art Work in Action.

ERIC Educational Resources Information Center

Skophammer, Karen

2002-01-01

Presents an activity where students select a social problem or cause and then create a poster to express something about the problem. States that students first learn about the history of posters. Includes learning objectives and an additional activity. (CMK)

Development of Schema Knowledge in the Classroom: Effects upon Problem Representation and Problem Solution of Programming.

ERIC Educational Resources Information Center

Tsai, Shu-Er

Students with a semester or more of instruction often display remarkable naivety about the language that they have been studying and often prove unable to manage simple programming problems. The main purpose of this study was to create a set of problem-plan-program types for the BASIC programming language to help high school students build plans…

Envisioning the Educational Possibilities of User-Created Virtual Worlds

ERIC Educational Resources Information Center

Antonacci, David M.; Modaress, Nellie

2008-01-01

Educational games and simulations can engage students in higher-level cognitive thinking, such as interpreting, analyzing, discovering, evaluating, acting, and problem solving. Recent technical advances in multiplayer, user-created virtual worlds have significantly expanded the capabilities of user interaction and development within these…

Advanced metal lift-off process using electron-beam flood exposure of single-layer photoresist

NASA Astrophysics Data System (ADS)

Minter, Jason P.; Ross, Matthew F.; Livesay, William R.; Wong, Selmer S.; Narcy, Mark E.; Marlowe, Trey

1999-06-01

In the manufacture of many types of integrated circuit and thin film devices, it is desirable to use a lift-of process for the metallization step to avoid manufacturing problems encountered when creating metal interconnect structures using plasma etch. These problems include both metal adhesion and plasma etch difficulties. Key to the success of the lift-off process is the creation of a retrograde or undercut profile in the photoresists before the metal deposition step. Until now, lift-off processing has relied on costly multi-layer photoresists schemes, image reversal, and non-repeatable photoresist processes to obtain the desired lift-off profiles in patterned photoresist. This paper present a simple, repeatable process for creating robust, user-defined lift-off profiles in single layer photoresist using a non-thermal electron beam flood exposure. For this investigation, lift-off profiles created using electron beam flood exposure of many popular photoresists were evaluated. Results of lift-off profiles created in positive tone AZ7209 and ip3250 are presented here.

Specialty Task Force: A Strategic Component to Electronic Health Record (EHR) Optimization.

PubMed

Romero, Mary Rachel; Staub, Allison

2016-01-01

Post-implementation stage comes after an electronic health record (EHR) deployment. Analyst and end users deal with the reality that some of the concepts and designs initially planned and created may not be complementary to the workflow; creating anxiety, dissatisfaction, and failure with early adoption of system. Problems encountered during deployment are numerous and can vary from simple to complex. Redundant ticket submission creates backlog for Information Technology personnel resulting in delays in resolving concerns with EHR system. The process of optimization allows for evaluation of system and reassessment of users' needs. A solid and well executed optimization infrastructure can help minimize unexpected end-user disruptions and help tailor the system to meet regulatory agency goals and practice standards. A well device plan to resolve problems during post implementation is necessary for cost containment and to streamline communication efforts. Creating a specialty specific collaborative task force is efficacious and expedites resolution of users' concerns through a more structured process.

Airland Battle Future Division Reconnaissance, a Complex Solution to a Simple Problem,

DTIC Science & Technology

1990-12-15

producing effects, has provided the modern commander the ability to conduct continuous operations and has, in fact, created a third battlefield dimension...and limited observation are no longer ser- ious warfighting obstacles. These improved weapon systems and their influence combined to create greater...squadron into a newly designed aviation and reconnaissance battalion.5 Conceptually, this plan would create a functional split of the division-level

[Incidence of proximal femur fractures in relation to seasons of the year and weather].

PubMed

Burget, F; Pleva, L; Kudrna, K; Kudrnová, Z

2012-01-01

The opinion that proximal femur fractures occur mainly in the winter season and are related to slippery surfaces prevails in both the lay and medical communities. The elucidation of this relationship would lead to a better understanding of the aetiology of these fractures and may help to prevent them in the elderly population. In a retrospective study conducted at two departments, the occurrence of proximal femur fractures in patients 60+ years old in relation to weather conditions (air temperature and its humidity, atmospheric pressure, rain and mist) between January 1, 2001 and December 31, 2005 was investigated. Patients with high-energy or pathological fractures were excluded. The results were evaluated by Statistika software. A total of 1720 patients were studied, of whom 1313 were women and 407 were men. The numbers of fractures did not differ significantly among either the seasons or months of the year. No correlation was found between the number of fractures and each of the weather characteristics (air temperature and its humidity, atmospheric pressure, wind speed and visibility). It is widely believed that hip fractures are connected with winter months and temperatures below zero. This is supported by several facts related to winter characteristics, such as slippery icy pavements, clumsiness due to warm bulky clothes, bodies affected by cold and thus predisposed to a fall and poorer visibility on shorter winter days. The effect of seasonal variation on hip fracture incidence has been investigated in 10 studies of which only one has taken the influence of daily temperature into consideration. All studies were conduced in the countries north of 40° latitude, i.e., in climatic conditions similar to our country, with temperatures falling below zero and ice-glazed pavements in winter months. Of them, six have found no relation between proximal femur fractures and weather conditions, two have reported an increased incidence of these fractures in winter months and two in summer months. Our study did not show any significant relationship between the incidence of proximal femur fractures and weather characteristics. Seasons of the year had no effect on the number of hip fractures or the length of hospital stay due to their treatment.

Effects of two natural medicine formulations on irritable bowel syndrome symptoms: a pilot study.

PubMed

Hawrelak, Jason A; Myers, Stephen P

2010-10-01

The study objective was to assess the effects and tolerability of two novel natural medicine formulations in improving bowel habit and abdominal symptoms in patients with irritable bowel syndrome (IBS). The DA-IBS formula was designed to treat diarrhea-predominant and alternating bowel habit IBS, and the C-IBS formula was designed to treat constipation-predominant IBS. This was a two arm, open-label, uncontrolled pilot study. Subjects were recruited from the greater Lismore area (NSW, Australia) in 2001. The study included 31 patients who fulfilled the Rome II criteria for IBS. Twenty-one (21) patients were classified as suffering from diarrhea-predominant or alternating bowel habit IBS and 10 patients were classified with constipation-predominant IBS. The DA-IBS formula consisted of a mixture of dried, powdered bilberry fruit, slippery elm bark, agrimony aerial parts, and cinnamon quills. The C-IBS formula consisted of a mixture of dried powdered slippery elm bark, lactulose, oat bran, and licorice root. The aim of each formula was to normalize stool frequency and stool consistency. Ingestion of the DA-IBS formula was associated with a small, but significant increase in bowel movement frequency (p = 0.027). Subjects in the DA-IBS group also experienced reductions in straining (p = 0.004), abdominal pain (p = 0.006), bloating (p < 0.0001), flatulence (p = 0.0001), and global IBS symptoms (p = 0.002) during the treatment phase of the trial. Subjects in the C-IBS group experienced a 20% increase in bowel movement frequency (p = 0.016) and significant reductions in straining (p < 0.0001), abdominal pain (p = 0.032), bloating (p = 0.034), and global IBS symptom severity (p = 0.0005), as well as improvements in stool consistency (p < 0.0001). Both formulas were well-tolerated. The DA-IBS formula was not effective in improving bowel habit in individuals with diarrhea-predominant or alternating bowel habit IBS, although it did significantly improve a number of IBS symptoms. The C-IBS formula significantly improved both bowel habit and IBS symptoms in patients with constipation-predominant IBS. Further research is warranted on C-IBS, as a potentially useful therapeutic formula.

Age-based disparities in end-of-life decisions in Belgium: a population-based death certificate survey

PubMed Central

2012-01-01

Background A growing body of scientific research is suggesting that end-of-life care and decision making may differ between age groups and that elderly patients may be the most vulnerable to exclusion of due care at the end of life. This study investigates age-related disparities in the rate of end-of-life decisions with a possible or certain life shortening effect (ELDs) and in the preceding decision making process in Flanders, Belgium in 2007, where euthanasia was legalised in 2002. Comparing with data from an identical survey in 1998 we also study the plausibility of the ‘slippery slope’ hypothesis which predicts a rise in the rate of administration of life ending drugs without patient request, especially among elderly patients, in countries where euthanasia is legal. Method We performed a post-mortem survey among physicians certifying a large representative sample (n = 6927) of death certificates in 2007, identical to a 1998 survey. Response rate was 58.4%. Results While the rates of non-treatment decisions (NTD) and administration of life ending drugs without explicit request (LAWER) did not differ between age groups, the use of intensified alleviation of pain and symptoms (APS) and euthanasia/assisted suicide (EAS), as well as the proportion of euthanasia requests granted, was bivariately and negatively associated with patient age. Multivariate analysis showed no significant effects of age on ELD rates. Older patients were less often included in decision making for APS and more often deemed lacking in capacity than were younger patients. Comparison with 1998 showed a decrease in the rate of LAWER in all age groups except in the 80+ age group where the rate was stagnant. Conclusion Age is not a determining factor in the rate of end-of-life decisions, but is in decision making as patient inclusion rates decrease with old age. Our results suggest there is a need to focus advance care planning initiatives on elderly patients. The slippery slope hypothesis cannot be confirmed either in general or among older people, as since the euthanasia law fewer LAWER cases were found. PMID:22708727

Age-based disparities in end-of-life decisions in Belgium: a population-based death certificate survey.

PubMed

Chambaere, Kenneth; Rietjens, Judith A C; Smets, Tinne; Bilsen, Johan; Deschepper, Reginald; Pasman, H Roeline W; Deliens, Luc

2012-06-18

A growing body of scientific research is suggesting that end-of-life care and decision making may differ between age groups and that elderly patients may be the most vulnerable to exclusion of due care at the end of life. This study investigates age-related disparities in the rate of end-of-life decisions with a possible or certain life shortening effect (ELDs) and in the preceding decision making process in Flanders, Belgium in 2007, where euthanasia was legalised in 2002. Comparing with data from an identical survey in 1998 we also study the plausibility of the 'slippery slope' hypothesis which predicts a rise in the rate of administration of life ending drugs without patient request, especially among elderly patients, in countries where euthanasia is legal. We performed a post-mortem survey among physicians certifying a large representative sample (n = 6927) of death certificates in 2007, identical to a 1998 survey. Response rate was 58.4%. While the rates of non-treatment decisions (NTD) and administration of life ending drugs without explicit request (LAWER) did not differ between age groups, the use of intensified alleviation of pain and symptoms (APS) and euthanasia/assisted suicide (EAS), as well as the proportion of euthanasia requests granted, was bivariately and negatively associated with patient age. Multivariate analysis showed no significant effects of age on ELD rates. Older patients were less often included in decision making for APS and more often deemed lacking in capacity than were younger patients. Comparison with 1998 showed a decrease in the rate of LAWER in all age groups except in the 80+ age group where the rate was stagnant. Age is not a determining factor in the rate of end-of-life decisions, but is in decision making as patient inclusion rates decrease with old age. Our results suggest there is a need to focus advance care planning initiatives on elderly patients. The slippery slope hypothesis cannot be confirmed either in general or among older people, as since the euthanasia law fewer LAWER cases were found.

Analysis of difficulties in mathematics problem solving based on revised Bloom’s Taxonomy viewed from high self-efficacy

NASA Astrophysics Data System (ADS)

Prismana, R. D. E.; Kusmayadi, T. A.; Pramudya, I.

2018-04-01

The ability of solving problem is a part of the mathematic curriculum that is very important. Problem solving prefers the process and strategy that is done by students in solving a problem rather than the result. This learning concept in accordance with the stages on the revised bloom’s taxonomy. The revised Bloom’s Taxonomy has two dimensions, namely the dimension of cognitive process and the dimension of knowledge. Dimension of knowledge has four categories, but this study only restricted on two knowledge, conceptual knowledge and procedural knowledge. Dimensions of cognitive processes are categorized into six kinds, namely remembering, understanding, applying, analyzing, evaluating, and creating. Implementation of learning more emphasis on the role of students. Students must have their own belief in completing tasks called self-efficacy. This research is a qualitative research. This research aims to know the site of the students’ difficulty based on revised Bloom’s Taxonomy viewed from high self-efficacy. The results of the study stated the students with high self efficacy have difficulties site. They are evaluating conceptual knowledge, evaluating procedural knowledge, creating conceptual knowledge, and creating procedural knowledge. It could be the consideration of teachers in the teaching, so as to reduce the difficulties of learning in students.

Development of the Canadian Marginalization Index: a new tool for the study of inequality.

PubMed

Matheson, Flora I; Dunn, James R; Smith, Katherine L W; Moineddin, Rahim; Glazier, Richard H

2012-04-30

Area-based measures of socio-economic status are increasingly used in population health research. Based on previous research and theory, the Canadian Marginalization Index (CAN-Marg) was created to reflect four dimensions of marginalization: residential instability, material deprivation, dependency and ethnic concentration. The objective of this paper was threefold: to describe CAN-Marg; to illustrate its stability across geographic area and time; and to describe its association with health and behavioural problems. CAN-Marg was created at the dissemination area (DA) and census tract level for census years 2001 and 2006, using factor analysis. Descriptions of 18 health and behavioural problems were selected using individual-level data from the Canadian Community Health Survey (CCHS) 3.1 and 2007/08. CAN-Marg quintiles created at the DA level (2006) were assigned to individual CCHS records. Multilevel logistic regression modeling was conducted to examine associations between marginalization and CCHS health and behavioural problems. The index demonstrated marked stability across time and geographic area. Each of the four dimensions showed strong and significant associations with the selected health and behavioural problems, and these associations differed depending on which of the dimensions of marginalization was examined. CAN-Marg is a census-based, empirically derived and theoretically informed tool designed to reflect a broader conceptualization of Canadian marginalization.

Prescription for a Beat-up Wilderness

ERIC Educational Resources Information Center

Scott, Bill

1977-01-01

The environmental problems created in the backcountry of the national parks and forests by the increasing numbers of campers and hikers are identified. Solutions to the problems of too many people, fires, campsite protection, waste, garbage and dogs are suggested. (BT)

The Formation of the Urban Environment in the West Siberian Oil and Gas Region: Problems and Challenges

NASA Astrophysics Data System (ADS)

Bauer, N. V.; Speranskaya, N. I.; Shabatura, L. N.; Iatsevich, O. E.

2016-10-01

The article deals with the problems faced by the person in relation to the culture of creating a sustainable urban environment. The urban environment is seen as space of human existence, influencing its spiritual and physical health. All the experts involved in the urban environment, think about the culture of its formation, unfortunately, only from a departmental point of view. Differently organized human environment inevitably affects behavior, emotional state of a man, his perception and understanding of space. The cultural heritage of society fits in the space of an artificial environment created by a man, and determines the behavior of people.For the solution of problems of formation of the urban environment, it is necessary to apply a set of interrelated technical, social, environmental, aesthetic and other measures. In this capacity, landscape design as a set of methods has to build a sustainable urban environment to ensure harmonious living.Current trends, methods, and techniques of landscape design are to create sustainable environment for a person - creative, spiritual, comfortable, attractive, safe, harmonious.

Anti-Litter Curriculum Packet, Interdisciplinary, K-12.

ERIC Educational Resources Information Center

Tillis, Richard

This curriculum packet consists of 20 illustrated cards with 15 activities designed to create "positive feelings" about a clean environment. Activities range from picture coloring for younger students, to lessons such as the economic and health problems litter creates for older students. Objectives include encouraging anti-litter and…

Creating Research Practice Partnerships in Education

ERIC Educational Resources Information Center

Penuel, William R.; Gallagher, Daniel J.

2017-01-01

"Creating Research-Practice Partnerships in Education" is an invaluable resource for educators and researchers seeking to develop long-term collaborations in which educators and researchers work together to study and solve pressing problems of practice. Drawing on a wide range of examples, the authors describe the purposes for which…

Learning through Intermediate Problems in Creating Cognitive Models

ERIC Educational Resources Information Center

Miwa, Kazuhisa; Morita, Junya; Nakaike, Ryuichi; Terai, Hitoshi

2014-01-01

Cognitive modelling is one of the representative research methods in cognitive science. It is believed that creating cognitive models promotes learners' meta-cognitive activities such as self-monitoring and reflecting on their own cognitive processing. Preceding studies have confirmed that such meta-cognitive activities actually promote learning…

Problem Solvers: Problem--Light It up! and Solutions--Flags by the Numbers

ERIC Educational Resources Information Center

Hall, Shaun

2009-01-01

A simple circuit is created by the continuous flow of electricity through conductors (copper wires) from a source of electrical energy (batteries). "Completing a circuit" means that electricity flows from the energy source through the circuit and, in the case described in this month's problem, causes the light bulb tolight up. The presence of…

Learning as a Problem Solving Tool. Technical Report CS74018-R.

ERIC Educational Resources Information Center

Claybrook, Billy G.

This paper explores the use of learning as a practical tool in problem solving. The idea that learning should and eventually will be a vital component of most Artificial Intelligence programs is pursued. Current techniques in learning systems are compared. A detailed discussion of the problems of representing, modifying, and creating heuristics is…

The Effectiveness of Problem-Based Learning on Teaching the First Law of Thermodynamics

ERIC Educational Resources Information Center

Tatar, Erdal; Oktay, Munir

2011-01-01

Background: Problem-based learning (PBL) is a teaching approach working in cooperation with self-learning and involving research to solve real problems. The first law of thermodynamics states that energy can neither be created nor destroyed, but that energy is conserved. Students had difficulty learning or misconceptions about this law. This study…

Social Issues and Problem-Based Learning in Sociology: Opportunities and Challenges in the Undergraduate Classroom

ERIC Educational Resources Information Center

Eglitis, Daina S.; Buntman, Fran L.; Alexander, Dameon V.

2016-01-01

This article discusses the use of problem-based learning (PBL) in the undergraduate sociology classroom. PBL shifts students from the role of passive listeners and learners to active knowledge builders and communicators through the use of concise and engaging social problem cases. PBL creates opportunities for building substantive area knowledge,…

SORPTION OF ARSENATE AND ARSENITE ON RUO2·XH2O: ANALYSIS OF SORBED PHASE OXIDATION STATE BY XANES

EPA Science Inventory

Arsenic contamination in water, soil and sediment is a global problem. Awareness of the problems created by As contamination have increased in recent years due to reports from Asia describing immense health problems due to As in drinking water [1, 2]. Changes in the U.S. regulati...

Demography: a tool for understanding the wildland-urban interface fire problems

Treesearch

James B. Davis

1989-01-01

Fire managers across the nation are confronting the rapidly developing problem created by movement of people into wildland areas, increasing what has been termed the wildland-urban interface. The problem is very complex from the standpoint of fire planning and management. To plan and manage more effectively, fire managers should identify three types of interface areas...

Ground-water as a nuisance

NASA Astrophysics Data System (ADS)

Straskraba, V.

1984-03-01

In certain circumstances, ground-water causes geotechnical problems and can be considered a nuisance rather than a blessing. The cases where ground-water creates considerable complications include construction, tunnelling, mining, landslides, and land subsidence. The development of hydrogeology as a science has proved over the years to substantially reduce the severe problems and disasterous problems caused by ground-water.

A Model for Ubiquitous Serious Games Development Focused on Problem Based Learning

ERIC Educational Resources Information Center

Dorneles, Sandro Oliveira; da Costa, Cristiano André; Rigo, Sandro José

2015-01-01

The possibility of using serious games with problem-based learning opens up huge opportunities to connect the experiences of daily life of students with learning. In this context, this article presents a model for serious and ubiquitous games development, focusing on problem based learning methodology. The model allows teachers to create games…

Assessing and Treating Aggression and Conduct Problems in Schools: Implications from the Coping Power Program

ERIC Educational Resources Information Center

Powell, Nicole P.; Boxmeyer, Caroline L.; Baden, Rachel; Stromeyer, Sara; Minney, Jessica A.; Mushtaq, Asia; Lochman, John E.

2011-01-01

Children with high levels of aggressive behavior and conduct problems create major management problems in school settings and interfere with the learning environment of their classmates and with their own academic achievement. A contextual social-cognitive model can provide a framework for understanding risk factors involved in the development and…

Developing Student Programming and Problem-Solving Skills with Visual Basic

ERIC Educational Resources Information Center

Siegle, Del

2009-01-01

Although most computer users will never need to write a computer program, many students enjoy the challenge of creating one. Computer programming enhances students' problem solving by forcing students to break a problem into its component pieces and reassemble it in a generic format that can be understood by a nonsentient entity. It promotes…

Council on Library Resources, Inc. Thirty-Seventh Annual Report/1993.

ERIC Educational Resources Information Center

Council on Library Resources, Inc., Washington, DC.

The Council on Library Resources was created to address the problems of libraries and is now committed to the most significant library problem of all, ensuring that library resources are embraced as part of the solution for people who seek to solve their own problems and those of their communities and institutions. In this annual report, the…

An Astronomical Problem in a Japanese Traditional Mathematical Text: The 49th Problem of the Kenki-sanpo of Takebe Katahiro

NASA Astrophysics Data System (ADS)

Ôhashi, Yukio

During the Edo period (Tokugawa-shogunate period) (1603-1867), there was a mathematical tradition now called "Wasan" which was primarily based on Chinese mathematics, but Japanese mathematicians also created new devices. It was quite popular, and common people could enjoy solving mathematical problems through Wasan regardless of their social status. Some astronomical problems were also treated there.

The chimpanzee as a flight candidate. [for cardiovascular studies

NASA Technical Reports Server (NTRS)

1977-01-01

Some of the characteristics that make the chimpanzee an attractive animal model (anatomy, size, intelligence, and durability) also create some very unique problems. The universally recognized problems of availability and expensive maintenance, combined with the often underestimated problems associated with routine housing, husbandry, restraint, and medical management, severely limit the availabe avenues of approach. Problems involved in using implantable, multichannel radiotelemetry systems to monitor cardiodynamics in chimpanzees are discussed.

Sustainability in a materials world

USGS Publications Warehouse

Amey, E.B.; Lemons, J.F.; Berry, Darbi R.

1996-01-01

Many adverse impacts on the environment can be directly related to the materials dispersed to the environment during processing or use, or after use as refuse and waste. Some materials, such as toxic wastes, are a major concern because they create immediate problems with longer-term effects. Gases released by major manufacturing industries can contribute to long-term regional and global problems such as acid rain or increased carbon dioxide in the atmosphere. The use of other materials, however, appears to be more benign or strictly localized in their impacts. If the current per capita level of material consumption in the United States was achieved worldwide, it would create major stresses on both resource adequacy and the environment. In fact, stresses have been created and will continue from this consumption style (developed countries) even if others don't achieve them. ?? 1996 International Association for Mathematical Geology.

Method of creating additional parking spaces in the “Tudor Vladimirescu” University Campus

NASA Astrophysics Data System (ADS)

Maftei, A.; Dontu, A. I.; Sachelarie, A.; Budeanu, B.

2016-08-01

The increasing number of vehicles in recent years has yielded a lot of problems regarding road vehicle infrastructure in residential areas, especially in towns. The problem is that roads dimensioning and especially parking spaces are under dimensioned for the current number of vehicles in use. The current paper addresses the problem of the lack of parking spaces in the “Tudor Vladimirescu” University Campus. The Campus infrastructure was build in the early 1970's and has received only a slight upgrade regarding access roads width, the access roads that were enlarged were Prof. Vasile Petrescu Street and Prof. Gheorghe Alexa Street. On the first specified road, parking spaces at 45 degrees were created, but this does not cover the number of needed parking spaces.

Implementation of the concrete maturity meter for Maryland : research summary.

DOT National Transportation Integrated Search

2011-12-01

Problem: : The process of waiting for concrete to attain its desired strength for certain : construction applications can pose one of two problems. The concrete strength : may be overestimated, which creates a safety concern for workers and the gener...

A Guide to USAF Helicopter Instrument Flight Procedures

DTIC Science & Technology

1985-04-01

being a helicopter pilot is so different from being an airplane pilot, and why, in general, airplance pilots are open, clear-eyed, bouyant extroverts...downwash created by a helicopter’s rotors have two basic effects on flight procedures. Rotor wash causes erroneous indications on aircraft pi tot...effects create additional problems close to the ground. And finally, a helicopter’s slow speed creates the need for a closer look at bank angles and

Fiscal Law, Incremental Funding, and Conditional Contracts.

DTIC Science & Technology

1985-01-22

Resolutions 6. Appropriations Lapses ii r7 7- 7.7 -.. 7 B. Problems Created In Agencies By Congressional Budget Process 1. Program Instability and Waste... created by the Budget and Accounting Act of 1921. To aid the President in his task of producing a single comprehensive federal budget, BOB had been...and borrows money to meet outlay payments, not to meet the level of new obligational authority created by Congress each year. 10 Although Secretary of

In Search of Vigilance: The Problem of Iatrogenically Created Psychological Phenomena

ERIC Educational Resources Information Center

Hancock, P. A.

2013-01-01

To what extent are identified psychological processes created in laboratories? The present work addresses this issue with reference to one particular realm of behavior: vigilance. Specifically, I argue that the classic vigilance decrement function can be viewed more realistically and advantageously as an "invigilant" increment function. Rather…

Rethinking the Library Game: Creating an Alternate Reality with Social Media

ERIC Educational Resources Information Center

Battles, Jason; Glenn, Valerie; Shedd, Lindley

2011-01-01

In recent years, libraries have made efforts to create games, often for the purpose of information literacy instruction. Games can provide an interactive alternative to traditional instruction by introducing research tools and resources while also teaching problem solving skills within a collaborative learning environment. Despite the benefits,…

Directing Diplomacy: Creating the Best Experience for Everyone in the Show.

ERIC Educational Resources Information Center

Mulcahy, Lisa

2003-01-01

Discusses the subtle psychological strategies good directors know how to employ with actors. Contends that if a director demonstrates a diplomatic attitude toward every student involved in a production, a perfect working atmosphere is created. Explores diplomacy basics; first impressions; rehearsal problems; personality issues; and talking points.…

[The desire to depart from life with dignity--an approach to physician-assisted suicide].

PubMed

Petermann, Heike

2008-01-01

"Sentenced to life". In German newspaper and journal articles as well as on television a controversial debate has emerged about the right-to-die. In history and many Western countries people have always been discussing assisted suicide. Under Oregon's Death with Dignity Act, terminally ill adult Oregonians are allowed to obtain and use prescriptions from their physicians for self-administered, lethal medications. The Oregon Public Health Division is required by the Act to collect information on compliance and to issue an annual report. This has been made public. According to these data, there was no slippery slope. In addition, no philosophical arguments can be put forward for the absolute prohibition against suicide of the terminally ill. This should give impetus to efforts to find solutions for the patients in all Western countries.

Children's "euthanasia" in Nazi Germany.

PubMed

Benedict, Susan; Shields, Linda; O'Donnell, Alison J

2009-12-01

Children with disabilities were killed during the Nazi era, often by nurses. Some nurses killed children, saying that they were under orders. Propaganda about the need for "racial purity" was all pervasive and influenced much of the population, including nurses. The German people accepted the "mercy" killing of children with disabilities. We describe the children's "euthanasia" program, explore the influence of propaganda, ask why it was acceptable to kill children, and provide historical context demonstrating "slippery slopes" which can lead to abrogation of ethical principles. Discussion of such history is essential as the ethical principles which were breached are still the cornerstone of nursing practice today. Only by openly discussing past wrongs can we attempt to ensure that they do not happen again. Archival documents from Germany and Israel, including trial depositions and transcripts, provided material, supplemented by secondary classic sources.

KSC-2009-1512

NASA Image and Video Library

2009-01-31

CAPE CANAVERAL, Fla. – A pair of ospreys perform an aerial dance around their nest near the NASA News Center at NASA's Kennedy Space Center in Florida. The bird at right is carrying a fish in its talons, the sole source of its diet. The osprey, also called fish hawk, is well adapted for capturing fish, which make up its entire diet. The soles of the birds' feet are equipped with sharp, spiny projections that give the bird a firm grip on its slippery prey. Nests of ospreys are bulky masses of sticks and debris placed in a tree, on rocks, flat ground or telephone poles. Many nests exist around the Launch Complex 39 Area at the center. The bird is one of more than 500 species of birds that co-exist at the center and the surrounding Merritt Island National Wildlife Refuge. Photo credit: NASA/Ben Smelgelsky

The impact of climate change on winter road maintenance and traffic accidents in West Midlands, UK.

PubMed

Andersson, Anna K; Chapman, Lee

2011-01-01

Winter weather can be a significant cause of road traffic accidents. This paper uses UKCIP climate change scenarios and a temporal analogue to investigate the relationship between temperature and severe road accidents in the West Midlands, UK. This approach also allows quantification of the changes in the severity of the winter season over the next century in the region. It is demonstrated that the predicted reduction in the number of frost days should in turn reduce the number of road accidents caused due to slipperiness by approximately 50%. However, the paper concludes by warning against complacency in winter maintenance regimes. A warmer climate may result in budget cuts for highway maintenance which in turn may well reverse declining accident trends. Copyright © 2010 Elsevier Ltd. All rights reserved.

Closet addiction in fiction: the search for Christiana Evans.

PubMed

Sibley, Gay

2007-01-01

Mary Ann Evans, who would later become the great nineteenth-century novelist George Eliot, takes up in her first three works of fiction a discussion of the use of alcohol in her own culture. However, it is in "Adam Bede" (1859) that a significant portion of the discussion (the alcoholism of one female character in particular) is so deliberately closeted -- so backgrounded -- that the structure of the text becomes a slippery portrait, not only of the extent to which the culturally pervasive alcoholism of women was persistently denied, but of Eliot's own mother's hidden substance abuse. An important minor character in "Adam Bede," identified by more than one biographer as having a kinship to Eliot's mother Christiana Evans, shows all the signs and symptoms of alcoholism, a phenomenon which even the story's narrator appears to be hiding from the reader.

Voluntary euthanasia.

PubMed

Brewin, Thurstan B

1986-05-10

Brewin comments upon James Rachels' The End of Life (Oxford University Press; 1986) and Voluntary Euthanasia (Peter Owen; 1986), a compilation edited by A.B. Downing and B. Smoker that is an expanded version of a 1969 work by Britain's Voluntary Euthanasia Society. Rachels maintains that it is illogical to distinguish between active and passive euthanasia. In Voluntary Euthanasia, 17 contributors argue the pros and cons of the issue. The Voluntary Euthanasia Society proposes that mentally competent persons be allowed by law to request euthanasia, either when taken ill or by advance directive. Brewin says he is almost but not quite convinced by the arguments for legalized voluntary euthanasia. He is concerned about the "slippery slope," the uncertainties of prognosis and quality of life judgments, the pressures to which the terminally ill or aged might be subjected, and the potentially negative impact of euthanasia on the physician patient relationship.

Euthanasia.

PubMed

Brock, D W

1992-01-01

The principles of self-determination and individual well-being support the use of voluntary euthanasia by those who do not have moral or professional objections to it. Opponents of this posture cite the ethical wrongness of the act itself and the folly of any public or legal policy permitting euthanasia. Positive consequences of making euthanasia legally permissible respect the autonomy of competent patients desiring it, expand the population of patients who can choose the option, and release the dying patient from otherwise prolonged suffering and agony. Potentially bad consequences of permitting euthanasia include the undermining of the "moral center" of medicine by allowing physicians to kill, the weakening of society's commitment to provide optimal care for dying patients, and, of greatest concern, the "slippery slope" argument. The evaluation of the arguments leads to support for euthanasia, with its performance not incompatible with a physician's professional commitment.

An ethical perspective on euthanasia and assisted suicide in The Netherlands from a nursing point of view.

PubMed

van der Arend, A J

1998-07-01

In the Netherlands, euthanasia and assisted suicide are formally forbidden by criminal law, but, under certain strictly formulated conditions, physicians are excused for administering these to patients on the basis of necessity. These conditions are bound up with a long process of criteria development. Therefore, physicians still live in uncertainty. Future court decisions may change the criteria. Apart from that, physicians can always be prosecuted. The position of nurses, however, is perfectly clear; they are never allowed to administer euthanasia or assisted suicide. Nevertheless, they should be involved in the decision-making process because they are an important source of information and have consultation skills. The openness of the discussion about these issues in the Netherlands may prevent an escalation of medical or nursing responsibility and falling victim to the 'slippery slope'.

Euthanasia.

PubMed Central

Brock, D. W.

1992-01-01

The principles of self-determination and individual well-being support the use of voluntary euthanasia by those who do not have moral or professional objections to it. Opponents of this posture cite the ethical wrongness of the act itself and the folly of any public or legal policy permitting euthanasia. Positive consequences of making euthanasia legally permissible respect the autonomy of competent patients desiring it, expand the population of patients who can choose the option, and release the dying patient from otherwise prolonged suffering and agony. Potentially bad consequences of permitting euthanasia include the undermining of the "moral center" of medicine by allowing physicians to kill, the weakening of society's commitment to provide optimal care for dying patients, and, of greatest concern, the "slippery slope" argument. The evaluation of the arguments leads to support for euthanasia, with its performance not incompatible with a physician's professional commitment. PMID:1519375

Counselling Ethnic Minorities: Does It Require Special Skills?

ERIC Educational Resources Information Center

Shack, Sybil

1978-01-01

Ethnicity is an important part of Canadian life. There is no magic formula for counseling "ethnic" students. Ethnic differences create some problems, but add spice and color to Canadian classrooms. Knowledge, understanding, sensitivity, acceptance, and mutual trust help to dissipate the problems. (Author)

Psychology's Contributions to Classroom Management

ERIC Educational Resources Information Center

Little, Steven G.; Akin-Little, Angeleque

2008-01-01

Classroom management (CRM) has been associated with discipline, control, or other terms that connote reducing unacceptable student behavior. However, CRM involves not merely responding effectively when problems occur, but also preventing problems from occurring by creating environments that encourage learning and appropriate behavior. Teachers'…

DEVELOPMENT OF A PORTABLE SOFTWARE LANGUAGE FOR PHYSIOLOGICALLY-BASED PHARMACOKINETIC (PBPK) MODELS

EPA Science Inventory

The PBPK modeling community has had a long-standing problem with modeling software compatibility. The numerous software packages used for PBPK models are, at best, minimally compatible. This creates problems ranging from model obsolescence due to software support discontinuation...

Barbarians at the Gate.

ERIC Educational Resources Information Center

Flanders, Bruce

1991-01-01

Discusses problems that new information technologies have created for intellectual property concerns. Digital sampling devices used in music are described, downloading from large databases is discussed, the problems with derivative works are considered, outdated copyright laws are discussed, and ways that librarians can help protect intellectual…

Neuroscience: toward unbinding the binding problem.

PubMed

Whitney, David

2009-03-24

How the brain 'binds' information to create a coherent perceptual experience is an enduring question. Recent research in the psychophysics of perceptual binding and developments in fMRI analysis techniques are bringing us closer to an understanding of how the brain solves the binding problem.

Field trial of a pulsed limestone diversion well

USGS Publications Warehouse

Sibrell, Philip L.; Denholm, C.; Dunn, Margaret

2013-01-01

The use of limestone diversion wells to treat acid mine drainage (AMD) is well-known, but in many cases, acid neutralization is not as complete as would be desired. Reasons for this include channeling of the water through the limestone bed, and the slow reaction rate of the limestone gravel. A new approach to improve the performance of the diversion well was tested in the field at the Jennings Environmental Education Center, near Slippery Rock, PA. In this approach, a finer size distribution of limestone was used so as to allow fluidization of the limestone bed, thus eliminating channeling and increasing particle surface area for faster reaction rates. Also, water flow was regulated through the use of a dosing siphon, so that consistent fluidization of the limestone sand could be achieved. Testing began late in the summer of 2010, and continued through November of 2011. Initial system performance during the 2010 field season was good, with the production of net alkaline water, but hydraulic problems involving air release and limestone sand retention were observed. In the summer of 2011, a finer size of limestone sand was procured for use in the system. This material fluidized more readily, but acid neutralization tapered off after several days. Subsequent observations indicated that the hydraulics of the system was compromised by the formation of iron oxides in the pipe leading to the limestone bed, which affected water distribution and flow through the bed. Although results from the field trial were mixed, it is believed that without the formation of iron oxides and plugging of the pipe, better acid neutralization and treatment would have occurred. Further tests are being considered using a different hydraulic configuration for the limestone sand fluidized bed.

Stem cell sources for clinical islet transplantation in type 1 diabetes: embryonic and adult stem cells.

PubMed

Miszta-Lane, Helena; Mirbolooki, Mohammadreza; James Shapiro, A M; Lakey, Jonathan R T

2006-01-01

Lifelong immunosuppressive therapy and inadequate sources of transplantable islets have led the islet transplantation benefits to less than 0.5% of type 1 diabetics. Whereas the potential risk of infection by animal endogenous viruses limits the uses of islet xeno-transplantation, deriving islets from stem cells seems to be able to overcome the current problems of islet shortages and immune compatibility. Both embryonic (derived from the inner cell mass of blastocysts) and adult stem cells (derived from adult tissues) have shown controversial results in secreting insulin in vitro and normalizing hyperglycemia in vivo. ESCs research is thought to have much greater developmental potential than adult stem cells; however it is still in the basic research phase. Existing ESC lines are not believed to be identical or ideal for generating islets or beta-cells and additional ESC lines have to be established. Research with ESCs derived from humans is controversial because it requires the destruction of a human embryo and/or therapeutic cloning, which some believe is a slippery slope to reproductive cloning. On the other hand, adult stem cells are already in some degree specialized, recipients may receive their own stem cells. They are flexible but they have shown mixed degree of availability. Adult stem cells are not pluripotent. They may not exist for all organs. They are difficult to purify and they cannot be maintained well outside the body. In order to draw the future avenues in this field, existent discrepancies between the results need to be clarified. In this study, we will review the different aspects and challenges of using embryonic or adult stem cells in clinical islet transplantation for the treatment of type 1 diabetes.

Liquid infused porous surfaces for mineral fouling mitigation.

PubMed

Charpentier, Thibaut V J; Neville, Anne; Baudin, Sophie; Smith, Margaret J; Euvrard, Myriam; Bell, Ashley; Wang, Chun; Barker, Richard

2015-04-15

Prevention of mineral fouling, known as scale, is a long-standing problem in a wide variety of industrial applications, such as oil production, water treatment, and many others. The build-up of inorganic scale such as calcium carbonate on surfaces and facilities is undesirable as it can result in safety risks and associated flow assurance issues. To date the overwhelming amount of research has mainly focused on chemical inhibition of scale bulk precipitation and little attention has been paid to deposition onto surfaces. The development of novel more environmentally-friendly strategies to control mineral fouling will most probably necessitate a multifunctional approach including surface engineering. In this study, we demonstrate that liquid infused porous surfaces provide an appealing strategy for surface modification to reduce mineral scale deposition. Microporous polypyrrole (PPy) coatings were fabricated onto stainless steel substrates by electrodeposition in potentiostatic mode. Subsequent infusion of low surface energy lubricants (fluorinated oil Fluorinert FC-70 and ionic liquid 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIm)) into the porous coatings results in liquid-repellent slippery surfaces. To assess their ability to reduce surface scaling the coatings were subjected to a calcium carbonate scaling environment and the scale on the surface was quantified using Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES). PPy surfaces infused with BMIm (and Fluorinert to a lesser extent) exhibit remarkable antifouling properties with the calcium carbonate deposition reduced by 18 times in comparison to untreated stainless steel. These scaling tests suggest a correlation between the stability of the liquid infused surfaces in artificial brines and fouling reduction efficiency. The current work shows the great potential of such novel coatings for the management of mineral scale fouling. Copyright © 2014 Elsevier Inc. All rights reserved.

Care of the Aged: Old Problems in Need of New Solutions.

ERIC Educational Resources Information Center

Kane, Robert; Kane, Rosalie

The tendency in the United States to view the nursing home as an all-purpose solution to the health problems of the elderly has created a set of self-made problems: increased dependency, depression and social isolation among the aged. In the United States, unlike in many European nations, institutional care of the elderly is conceived of and…

Synectics: An Explanation of the Process and Some Comments on its Application in the Secondary School.

ERIC Educational Resources Information Center

Marran, James F.; Rogan, Donald V.

Synectics is a method of creative problem solving through the use of metaphor and apparent irrelevancy developed by William J. J. Gordon. The process involves rational knowledge of the problem to be solved, irrational improvisations that lead to fertile associations creating new approaches to the problem, and euphoric state that is essential in…

Crying in the Halls: Supervising Students with Symptoms of Emotional Problems in the Clinical Practicum

ERIC Educational Resources Information Center

Storrie, Kim; Ahern, Kathy; Tuckett, Anthony

2012-01-01

There is evidence that the number of university students with mental health problems has increased over the past few years. The literature also suggests that the number and effect of troubled health science students create significant problems in the clinical practicum. However, there are gaps in the literature as to how clinical teachers actually…

Two-Way Tables: Issues at the Heart of Statistics and Probability for Students and Teachers

ERIC Educational Resources Information Center

Watson, Jane; Callingham, Rosemary

2014-01-01

Some problems exist at the intersection of statistics and probability, creating a dilemma in relation to the best approach to assist student understanding. Such is the case with problems presented in two-way tables representing conditional information. The difficulty can be confounded if the context within which the problem is set is one where…

Developing a Creativity and Problem Solving Course in Support of the Information Systems Curriculum

ERIC Educational Resources Information Center

Martz, Ben; Hughes, Jim; Braun, Frank

2016-01-01

This paper looks at and assesses the development and implementation of a problem solving and creativity class for the purpose of providing a basis for a Business Informatics curriculum. The development was fueled by the desire to create a broad based class that 1. Familiarized students to the underlying concepts of problem solving; 2. Introduced…

Mathematics as a Course of Study in Problem Solving: Then and Now.

ERIC Educational Resources Information Center

Ellis, Wade, Jr.

The mathematics curriculum in the first 2 years of college is a tool created to assist in solving problems. The current mathematics curriculum has changed little; the same topics, tied to the engineering and science curriculum, are taught as they were being taught in 1945. The problems that students need to solve have changed however. Both the…

Water--Problems and Solutions. A Report Concerning the Problems and Solutions of Negative Water Balance.

ERIC Educational Resources Information Center

Ewert, Alan

Outdoor leaders constantly face problems created by water shortage and, to act effectively, must thoroughly understand the body's use of water and the ways to delay dehydration when water shortage occurs. Dehydration begins when there is a negative water balance, or more water lost than ingested, and progresses from the stage of dryness, to the…

Problem Solving in Technology-Rich Environments. A Report from the NAEP Technology-Based Assessment Project, Research and Development Series. NCES 2007-466

ERIC Educational Resources Information Center

Bennett, Randy Elliot; Persky, Hilary; Weiss, Andrew R.; Jenkins, Frank

2007-01-01

The Problem Solving in Technology-Rich Environments (TRE) study was designed to demonstrate and explore innovative use of computers for developing, administering, scoring, and analyzing the results of National Assessment of Educational Progress (NAEP) assessments. Two scenarios (Search and Simulation) were created for measuring problem solving…

Creating Valuable Class Web Sites

ERIC Educational Resources Information Center

Baker, Elizabeth A.

2008-01-01

Even those teachers with the best intentions of taking advantage of the Internet to support learning may have obstacles before them. In researching the problem, the author has heard their complaints and understands some of the difficulties. However, creating a classroom Web site is not as difficult as one might think. In this article, the author…

The Hemophilia Games: An Experiment in Health Education Planning.

ERIC Educational Resources Information Center

National Heart and Lung Inst. (DHEW/PHS), Bethesda, MD.

The Hemophilia Health Education Planning Project was designed to (1) create a set of tools useful in hemophilia planning and education, and (2) create a planning model for other diseases with similar factors. The project used the game-simulations technique which was felt to be particularly applicable to hemophilia health problems, since as a…

Issues and Options in Creating a National Assessment in World History

ERIC Educational Resources Information Center

Bain, Robert B.; Shreiner, Tamara L.

2005-01-01

The National Assessment Governing Board (NAGB) is considering creating a National Assessment of Educational Progress (NAEP) for world history education. On the surface, a national assessment in world history appears to be a sensible and essentially unproblematic decision. However, problems lurk below the surface challenging the creation of a…

Creating and Evaluating Artificial Domiciles for Bumble Bees

ERIC Educational Resources Information Center

Golick, Douglas A.; Ellis, Marion D.; Beecham, Brady

2006-01-01

Bumble bees are valuable pollinators of native and cultivated flora. Despite our knowledge of bumble bee nest site selection, most efforts to attract bumble bees to artificial domiciles have been met with limited success. Creating and evaluating artificial domiciles provides students an opportunity to investigate a real problem. In this lesson,…

Discourse Anaphora in Turkish as Mother Tongue

ERIC Educational Resources Information Center

Kyuchukov, Hristo

2009-01-01

The present paper researches the abilities of Turkish adults from Bulgaria to create narratives. It analyses the narratives of the adults using discourse strategies. The findings show some problems of bilingual adults in creating narratives which are not discussed in the scientific literature. This paper brings some new knowledge to the field of…

Measuring and Communicating the Value Created by an Organization

ERIC Educational Resources Information Center

Sherman, W. Richard

2010-01-01

This paper offers a different perspective in measuring the value created by an organization. It does so in the context of an undergraduate course in managerial accounting. In order to break down the functional silo approach to problem solving that has become the model of traditional business education, applications of shadow accounting, the…

Creating a Winning Game Plan. The Secondary Teacher's Playbook.

ERIC Educational Resources Information Center

Gose, Michael D.

This book offers strategies for high school teachers that provide tools for creating, repairing, and tweaking all the discernible components of teaching. The book is organized to move from context to teaching to discipline to thriving in teaching. The book includes tips on how to minimize discipline problems with effective curriculum and sound…

Chairing a Small Department.

ERIC Educational Resources Information Center

Bowker, Lee H.; Lynch, David M.

Ten management problems for chairs of small departments in small colleges are discussed, along with problem-solving strategies for these administrators. Serious disagreements within a small and intimate department may create a country club culture in which differences are smoothed over and the personal idiosyncrasies of individual members are…

77 FR 9239 - California State Motor Vehicle and Nonroad Engine Pollution Control Standards; Truck Idling...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... Pollution Control Standards; Truck Idling Requirements; Notice of Decision AGENCY: Environmental Protection... to meet its serious air pollution problems. Likewise, EPA has consistently recognized that California... and high concentrations of automobiles, create serious pollution problems.'' \\37\\ Furthermore, no...

Alcohol control in Virginia : planning documents for use by agencies of the Commonwealth.

DOT National Transportation Integrated Search

1982-01-01

The Governor's Task Force to Combat Drunk Driving was created to confront the problem of drunken driving in Virginia, and to ascertain Virginia's current efforts to address this problem so that these efforts could be assessed and appropriate changes ...

Problems and Issues of High Rise Low Cost Housing in Malaysia

NASA Astrophysics Data System (ADS)

Wahi, Noraziah; Mohamad Zin, Rosli; Munikanan, Vikneswaran; Mohamad, Ismail; Junaini, Syahrizan

2018-03-01

Major cities in developing countries are undergoing an enormous migration of peoples from countryside regions. This migration from the countryside regions were mostly to develop carrier and expecting for higher salary for their living survival. Consequently, the large amount of immigrants from countryside to the cities each year had created a great demand for urban housing. The impact from that, Kuala Lumpur, Selangor and its surrounding area now is crowded by the low-income group who cannot afford to own an affordable house. The government of Malaysia had aware of this situation and therefore had created the low cost housing especially for urban poor. However, there are many issues and problems arise regarding the low cost housing in Malaysia especially in urban area. The research is regarding a study on problems and issues of high rise low-cost housing in Malaysia. The need to examine the problems associated with the high rise low cost housing is to ensure the success of future low cost housing development in Malaysia.

A continuum of sociotechnical requirements for patient-centered problem lists.

PubMed

Collins, Sarah; Tsivkin, Kira; Hongsermeier, Tonya; Dubois, David; Nandigam, Hari Krishna; Rocha, Roberto A

2013-01-01

Specific requirements for patient-centered health information technology remain ill-defined. To create operational definitions of patient-centered problem lists, we propose a continuum of sociotechnical requirements with five stages: 1) Intradisciplinary Care Planning: Viewing and searching for problems by discipline; 2) Multi-disciplinary Care Planning: Categorizing problem states to meet discipline-specific needs; 3) Interdisciplinary Care Planning: Sharing and linking problems between disciplines; 4) Integrated and Coordinated Care Planning: Associating problems with assessments, tasks, interventions and outcomes across disciplines for coordination, knowledge development, and reporting; and 5) Patient-Centered Care Planning: Engaging patients in identification of problems and maintenance of their problem list.

Using virtual reality technology and hand tracking technology to create software for training surgical skills in 3D game

NASA Astrophysics Data System (ADS)

Zakirova, A. A.; Ganiev, B. A.; Mullin, R. I.

2015-11-01

The lack of visible and approachable ways of training surgical skills is one of the main problems in medical education. Existing simulation training devices are not designed to teach students, and are not available due to the high cost of the equipment. Using modern technologies such as virtual reality and hands movements fixation technology we want to create innovative method of learning the technics of conducting operations in 3D game format, which can make education process interesting and effective. Creating of 3D format virtual simulator will allow to solve several conceptual problems at once: opportunity of practical skills improvement unlimited by the time without the risk for patient, high realism of environment in operational and anatomic body structures, using of game mechanics for information perception relief and memorization of methods acceleration, accessibility of this program.

Regression analysis of radial artery pulse palpation as a potential tool for traditional Chinese medicine training education.

PubMed

Huang, Po-Yu; Lin, Wen-Chen; Chiu, Bill Yuan-Chi; Chang, Hen-Hong; Lin, Kang-Ping

2013-12-01

Pulse palpation was an important part of the traditional Chinese medicine (TCM) vascular examination. It is challenging for new physicians to learn to differentiate between palpations of various pulse types, due to limited comparative learning time with established masters, and so normally it takes many years to master the art. The purpose of this study was to introduce an offline TCM skill evaluation and comparison system that makes available learning of palpation without the master's presence. We record patient's radial artery pulse using an existing pressure-based pulse acquisition system, then annotate it with teachers' evaluation when palpating the same patient, assigned as likelihood of it being each pulse type, e.g. wiry, slippery, hesitant. These training data were separated into per-doctor and per-skill databases for evaluation and comparison purposes, using the following novel procedure: each database was used as training data to a panel of time-series data-mining algorithms, driven by two validation tests, with the created training models evaluated in mean-squared-error. Each validation of the panel and training data yielded an array of error terms, and we chose one to quantitatively evaluate palpation techniques, giving way to compute self consistency and mutual-similarity across different practitioners and techniques. Our experiment of two practitioners and 396 per-processing samples yielded the following: one of the physicians has much higher value of self-consistency for all tested pulse types. Also, the two physicians have high similarity in how they palpate the slipper pulse (P) type, but very dissimilar for hesitant (H) type. This system of skill comparisons may be more broadly applied in places where supervised learning algorithms can detect and use meaningful features in the data; we chose a panel of algorithms previously shown to be effective for many time-series types, but specialized algorithms may be added to improve feature-specific aspect of evaluation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Anti-Atlas Mountains, Morocco

NASA Technical Reports Server (NTRS)

2002-01-01

The Anti-Atlas Mountains of northern Africa and the nearby Atlas mountains were created by the prolonged collision of the African and Eurasian tectonic plates, beginning about 80 million years ago. Massive sandstone and limestone layers have been crumpled and uplifted more than 4,000 meters in the High Atlas and to lower elevations in the Anti-Atlas. Between more continuous major fold structures, such as the Jbel Ouarkziz in the southwestern Anti-Atlas, tighter secondary folds (arrow) have developed. Earlier, the supercontinent of Pangea rifted apart to form precursors to the Mediterranean and the Atlantic Ocean (Beauchamp and others, 1996). In those seas sands, clays, limey sediments, and evaporite layers (gypsum, rock salt) were deposited. Later, during the mountain-building plate collision, the gypsum layers flowed under the pressure and provided a slippery surface on which overlying rigid rocks could glide (Burkhard, 2001). The broad, open style of folds seen in this view is common where evaporites are involved in the deformation. Other examples can be found in the Southern Zagros of Iran and the Sierra Madre Oriental of Mexico. Information Sources: Beauchamp, W., Barazangi, M., Demnati, A., and El Alji, M., 1996, Intracontinental rifting and inversion: Missour Basin and Atlas Mountains, Morocco: Tulsa, American Association of Petroleum Geologists Bulletin, v. 80, No. 9, p. 1459-1482. Burkhard, Martin, 2001, Tectonics of the Anti-Atlas of Morocco -- Thin-skin/thick-skin relationships in an atypical foreland fold belt. University of Neuchatel, Switzerland: http://www-geol.unine.ch/Structural/Antiatlas.html (accessed 1/29/02). STS108-711-25 was taken in December, 2001 by the crew of Space Shuttle mission 108 using a Hasselblad camera with 250-mm lens. The image is provided by the Earth Sciences and Image Analysis Laboratory at Johnson Space Center. Additional images taken by astronauts and cosmonauts can be viewed at the NASA-JSC Gateway to Astronaut Photography of Earth.

When the Desert Beetle Met the Carnivorous Plant: A Perfect Match for Droplet Growth and Shedding

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aizenberg, Joanna; Park, Kyoo Chul; Kim, Philseok

2015-01-14

Phase change of vapor followed by coalescence and transport on ubiquitous bumped or curved surfaces is of fundamental importance for a wide range of phenomena and applications from water condensation on cold beverage bottles, to fogging on glasses and windshields, self-cleaning by jumping droplets, weathering, self-assembly, desalination, latent heat transfer, etc. Over the past decades, many attempts to understand and control the droplet growth dynamics and shedding of condensates on textured surfaces have focused on finding the role of micro/nanotexture combined with wettability. In particular, inspired by the Namib desert beetle bump structure, studies tested the effect of topography onmore » the preferential condensation. However, like the preferential condensation observed on flat surfaces, hybrid wettability rather than texture plays a major role; the role of bump topography on local preferential condensation has been unexplored and still not clearly understood. In addition, given that not only facilitating the droplet growth but also transporting the condensed droplets toward the desired reservoir is essential to make fresh sites for renucleation and regrowth of the droplets for enhancing condensation efficiency, the current hybrid-wettability- based design is not efficient to transport the condensates due to the high contact angle hysteresis created by highly wettable pinning points. Here we show that beetle-inspired bump topography leads faster localized condensation and transport of water. Employing simple analytic and more complicated numerical calculations, we reveal the detailed role of topography and predict the focused diffusion flux based on the distortion of concentration gradient around convex surface topography. We experimentally demonstrate the systematic understanding on the unseen effect of topographical parameters on faster droplet growth dynamics on various bump geometries. Further rational design of asymmetric topography and synergetic combination with slippery coating simultaneously enable both faster droplet growth and transport for applications including efficient water condensation.« less

Promoting interdomain analogical transfer: When creating a problem helps to solve a problem.

PubMed

Minervino, Ricardo A; Olguín, Valeria; Trench, Máximo

2017-02-01

Research on analogical thinking has devised several ways of promoting an abstract encoding of base analogs, thus rendering them more retrievable during later encounters with similar situations lacking surface similarities. Recent studies have begun to explore ways of facilitating transfer at retrieval time, which could facilitate the retrieval of distant analogs learned within contexts that were not specially directed to emphasize their abstract structure. Such studies demonstrate that comparing a target problem to an analogous problem helps students retrieve base analogs that lack surface similarities. To devise more portable ways of enhancing analogical transfer, Experiment 1 replicated Kurtz and Loewenstein's (Memory & Cognition, 35, 334-341, 2007) target-comparison procedure with an additional condition in which participants compared the target to a nonanalogous problem before attempting to reach its solution. Although comparing two analogous targets outperformed the standard transfer condition in promoting analogical transfer, comparing nonanalogous problems did not yield a transfer advantage. Based on prior studies that showed that the activity of creating analogous problems during their initial encoding elicits a more abstract representation of base analogs, in Experiment 2 we assessed whether constructing a second analogous target problem at retrieval time helps participants retrieve superficially dissimilar base analogs. As predicted, target invention increased the retrieval of distant sources. In both experiments we found an association between the quality of the generated schemas and the probability of retrieving a distant base analog from memory.

Goldratt's thinking process applied to the budget constraints of a Texas MHMR facility.

PubMed

Taylor, Lloyd J; Churchwell, Lana

2004-01-01

Managers for years have known that the best way to run a business is to constantly be looking for ways to improve the way to do business. The barrier has been the ability to identify and solve the right problems. Eliyahu Goldratt (1992c), in his book The Goal, uses a love story format to illustrate his "Theory of Constraints." In Goldratt's (1994) next book, It's Not Luck, he further illustrates this powerful technique called "The Thinking Process" which is based on the Socratic method, using the "if ... then" reasoning process, The first step is to identify UDEs or undesirable effects within the organization and then use these UDEs to create a Current Reality Tree (CRT) which helps to identify the core problem. Next, use an Evaporating Cloud to come up with ideas and a way to break the constraint. Finally, use the injections in the Evaporating Cloud to create a Future Reality Tree, further validating the idea and making sure it does not create any negative effects. In this article, the "Thinking Process" will be used to identify and solve problems related to the General Medical Department of an MHMR State Hospital.

Bringing Lean Six Sigma to the Supply Chain Classroom: A Problem-Based Learning Case

ERIC Educational Resources Information Center

Miller, Keith E.; Hill, Craig; Miller, Antoinette R.

2016-01-01

The article describes a project that employs problem-based learning (PBL) to teach the Lean Six Sigma (LSS) methodology as part of an undergraduate or graduate business course. It is scalable to a variety of course delivery and schedule formats, and uses data sets that can create distinct problem-solving scenarios for up to 16 student teams. It…

Writing Children's Books in Sociology Class: An Innovative Approach to Teaching Social Problems to Undergraduate Students

ERIC Educational Resources Information Center

Maples, James N.; Taylor, William V.

2013-01-01

In this instructional article, we describe a non-traditional course assignment in which we ask students in our social problems courses to write, illustrate, and present a children's book about a social problem as part of the process of learning. Over the course of the semester, students utilize guided handouts to create a children's book exploring…