Effect of Wall Shear Stress on Corrosion Inhibitor Film Performance

NASA Astrophysics Data System (ADS)

Canto Maya, Christian M.

In oil and gas production, internal corrosion of pipelines causes the highest incidence of recurring failures. Ensuring the integrity of ageing pipeline infrastructure is an increasingly important requirement. One of the most widely applied methods to reduce internal corrosion rates is the continuous injection of chemicals in very small quantities, called corrosion inhibitors. These chemical substances form thin films at the pipeline internal surface that reduce the magnitude of the cathodic and/or anodic reactions. However, the efficacy of such corrosion inhibitor films can be reduced by different factors such as multiphase flow, due to enhanced shear stress and mass transfer effects, loss of inhibitor due to adsorption on other interfaces such as solid particles, bubbles and droplets entrained by the bulk phase, and due to chemical interaction with other incompatible substances present in the stream. The first part of the present project investigated the electrochemical behavior of two organic corrosion inhibitors (a TOFA/DETA imidazolinium, and an alkylbenzyl dimethyl ammonium chloride), with and without an inorganic salt (sodium thiosulfate), and the resulting enhancement. The second part of the work explored the performance of corrosion inhibitor under multiphase (gas/liquid, solid/liquid) flow. The effect of gas/liquid multiphase flow was investigated using small and large scale apparatus. The small scale tests were conducted using a glass cell and a submersed jet impingement attachment with three different hydrodynamic patterns (water jet, CO 2 bubbles impact, and water vapor cavitation). The large scale experiments were conducted applying different flow loops (hilly terrain and standing slug systems). Measurements of weight loss, linear polarization resistance (LPR), and adsorption mass (using an electrochemical quartz crystal microbalance, EQCM) were used to quantify the effect of wall shear stress on the performance and integrity of corrosion inhibitor films. Different scenarios were evaluated in this section of the work, such as the loss of corrosion inhibitor due to the formation of foam, and the effect of different substrates on the adsorption of corrosion inhibitor. Erosion/corrosion effects due to solids carried by a multiphase flow were investigated both on a small and large scale. Small scale experiments were performed in order to determine whether the corrosion inhibitor concentration was diminished because of adsorption onto the large surface area of entrained solid particles. The large scale experiments were done to evaluate the effect of mechanical erosion corrosion on inhibitor film performance, and vice versa. The analysis of the results obtained by electrochemical characterization shows that the adsorption mechanism having a corrosion inhibitor competing with water molecules for a place on the steel surface is an accurate approach to describe this phenomenon. From the experimental results obtained in the multiphase part of this research project, it can be concluded that the performance of corrosion inhibitor films is not significantly impacted by mechanical forces alone; even under the worst case scenarios tested here (standing slug and erosion/corrosion). Reduction of inhibitor performance was found to be primarily due to the loss of inhibitor due to consumption by adsorption particularly when a gas phase was present, leading to foam formation.

Socioeconomic impact of photovoltaic power at Schuchulik, Arizona. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bahr, D.; Garrett, B.G.; Chrisman, C.

1980-10-01

Schuchuli, a small remote village on the Papago Indian Reservation in southwest Arizona, is 27 kilometers (17 miles) from the nearest available utility power. In some respects, Schuchuli resembles many of the rural villages in other parts of the world. For example, it's relatively small in size (about 60 residents), composed of a number of extended family groupings, and remotely situated relative to major population centers (190 km, or 120 miles, from Tucson). Its lack of conventional power is due to the prohibitive cost of supplying a small electrical load with a long-distance distribution line. Furthermore, alternate energy sources aremore » expensive and place a burden on the resources of the villagers. On December 16, 1978, as part of a federally funded project, a solar cell power system was put into operation at Schuchuli. The system powers the village water pump, lighting for homes ad other village buildings, family refrigerators and a communal washing machine and sewing machine. The project, managed for the US Department of Energy by the NASA Lewis Research Center, provided for a one-year socio-economic study to assess the impact of a relatively small amount of electricity on the basic living environment of the villagers. The results of that study are presented, including village history, group life, energy use in general and the use of the photovoltaic-powered appliances. No significant impacts due to the photovoltaic power system were observed.« less

The University in Periods of Technological Change: A Historically Grounded Perspective

ERIC Educational Resources Information Center

Amirault, Ray J.; Visser, Yusra L.

2009-01-01

The University has a remarkably enduring history that is due in no small part to its ability to adapt itself whenever intellectual, political, or technological change has occurred. Today's technology revolution, however, presents the University with one of the greatest adaptation challenges it has ever faced in its lengthy history, and the…

Congenital duodenal web (wind-soak variety) in the fourth part of the duodenum causing obstruction in a female child.

PubMed

Saha, N; Hasanuzaman, S M; Chowdhury, L H; Talukder, S A

2012-10-01

Delayed presentation of Duodenal Obstruction is a great diagnostic dilemma due to non-specific, varied & wide spectrum presentation. In this study, a 6 years female child presented with recurrent, intermittent, colicky abdominal pain with bilious vomiting, and occasional constipation from 9 months of her age, without having any significant family history or associated condition. She was initially diagnosed as a case of recurrent small bowel obstruction due to atypical variant of malrotation. But, after laparotomy, she was finally diagnosed as a case of recurrent duodenal obstruction due to Congenital Duodenal Web (Wind-Soak Variety) with a central hole in the fourth part of the duodenum. After uneventful recovery of post operative period the patient was discharged at 7th postoperative day & followed up upto 3 months. She had been found alright without any complication.

A Fast Hyperspectral Vector Radiative Transfer Model in UV to IR spectral bands

NASA Astrophysics Data System (ADS)

Ding, J.; Yang, P.; Sun, B.; Kattawar, G. W.; Platnick, S. E.; Meyer, K.; Wang, C.

2016-12-01

We develop a fast hyperspectral vector radiative transfer model with a spectral range from UV to IR with 5 nm resolutions. This model can simulate top of the atmosphere (TOA) diffuse radiance and polarized reflectance by considering gas absorption, Rayleigh scattering, and aerosol and cloud scattering. The absorption component considers several major atmospheric absorbers such as water vapor, CO2, O3, and O2 including both line and continuum absorptions. A regression-based method is used to parameterize the layer effective optical thickness for each gas, which substantially increases the computation efficiency for absorption while maintaining high accuracy. This method is over 500 times faster than the existing line-by-line method. The scattering component uses the successive order of scattering (SOS) method. For Rayleigh scattering, convergence is fast due to the small optical thickness of atmospheric gases. For cloud and aerosol layers, a small-angle approximation method is used in SOS calculations. The scattering process is divided into two parts, a forward part and a diffuse part. The scattering in the small-angle range in the forward direction is approximated as forward scattering. A cloud or aerosol layer is divided into thin layers. As the ray propagates through each thin layer, a portion diverges as diffuse radiation, while the remainder continues propagating in forward direction. The computed diffuse radiance is the sum of all of the diffuse parts. The small-angle approximation makes the SOS calculation converge rapidly even in a thick cloud layer.

Fostering design for avoiding small parts in commonly used objects.

PubMed

de Koning, Ton; Foltran, Francesca; Gregori, Dario

2012-05-14

Injuries due to the accidental ingestion or aspiration of small parts have became a matter of interest in the last 30 years, focusing on the relationship between a proper prevention and the diminished frequency of occurrences. Small parts in commonly used objects represent a large sector of potential danger, taking explicit mouthing behavior of children in the first four years of life. In this paper the intent is to show the current situation of design projects and legislation around the world, meant to avoid the casual accidents due to manufacturing reasons. Proposed process and quality control standards seek to eliminate production errors and control materials to avoid deviation from the design. The present study draws its data from the Susy Safe registry, a European Commission co-funded project started in February 2005, whose aim is to establish an international registry of cases of Foreign Bodies (FB) injuries in children aged 0-14 years. Information collected from the data base concern age and gender of the child, location, shape, volume, consistency and elipticity of the foreign body, any complication occurred, hospitalization, and behavioral aspects linked to the injury, like the supervision of the parents or the activity concomitant to the injury. Cases are prospectively collected using the Susy Safe system from 06/2005; moreover, also information regarding past consecutive cases available in each center adhering to the project have been entered in the Susy Safe Registry. Data evidenced that the majority of small parts related injuries are related to stationery. The majority of objects (56.7%), were located in the nose, followed by the ears (31.5%). The distribution on incidence of FB injuries by age class shows that the majority of injuries due to small parts in common objects occurred in children older than >3 years. Male and female were affected with the same frequency when concerning the nose, while all other locations showed a higher frequency in males. Data suggested that hospitalization occurred in 32% of those who compiled the form, resulting in complication just in 16% of injured. Although the most frequent location needing hospitalization was the tracheobronchial tree, the most frequent location showing complication was the nose, 80.3% of the complications, having an infection as most frequent outcome. In children younger than 1 year median volume reached 333.62 mm(3), in children between 1 and 2 years, median volume was 81.12 mm(3), in older children (>3 years) it showed 37.68 mm(3). The same considerations can be seen for the ellipticity, where the median ellipticity was 2.79 in children <1 year, while it was 1.94 in children between 1 and 2 years, and 1.17 in the older ones. Consistency is similar for all age classes, stressing that rigid small parts were those more involved in injuries with foreign bodies. Behavioral aspects pointed out that the 80% of children were playing before the accident, and 65.3% were under adults' supervision. Adult presence resulted associated to the absence of complication, with a p-value of 0.04. The study stresses the importance of primary prevention, seen as the active care of adults toward children manipulating foreign bodies potentially dangerous. This presence may not avoid the event, but in case of FBs aspiration, ingestion, insertion or inhalation, it could be the main factor leading to fewer complications. Copyright © 2012. Published by Elsevier Ireland Ltd.

Ensemble Kalman filters for dynamical systems with unresolved turbulence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grooms, Ian, E-mail: grooms@cims.nyu.edu; Lee, Yoonsang; Majda, Andrew J.

Ensemble Kalman filters are developed for turbulent dynamical systems where the forecast model does not resolve all the active scales of motion. Coarse-resolution models are intended to predict the large-scale part of the true dynamics, but observations invariably include contributions from both the resolved large scales and the unresolved small scales. The error due to the contribution of unresolved scales to the observations, called ‘representation’ or ‘representativeness’ error, is often included as part of the observation error, in addition to the raw measurement error, when estimating the large-scale part of the system. It is here shown how stochastic superparameterization (amore » multiscale method for subgridscale parameterization) can be used to provide estimates of the statistics of the unresolved scales. In addition, a new framework is developed wherein small-scale statistics can be used to estimate both the resolved and unresolved components of the solution. The one-dimensional test problem from dispersive wave turbulence used here is computationally tractable yet is particularly difficult for filtering because of the non-Gaussian extreme event statistics and substantial small scale turbulence: a shallow energy spectrum proportional to k{sup −5/6} (where k is the wavenumber) results in two-thirds of the climatological variance being carried by the unresolved small scales. Because the unresolved scales contain so much energy, filters that ignore the representation error fail utterly to provide meaningful estimates of the system state. Inclusion of a time-independent climatological estimate of the representation error in a standard framework leads to inaccurate estimates of the large-scale part of the signal; accurate estimates of the large scales are only achieved by using stochastic superparameterization to provide evolving, large-scale dependent predictions of the small-scale statistics. Again, because the unresolved scales contain so much energy, even an accurate estimate of the large-scale part of the system does not provide an accurate estimate of the true state. By providing simultaneous estimates of both the large- and small-scale parts of the solution, the new framework is able to provide accurate estimates of the true system state.« less

Who's Afraid of Politics? On the Need to Teach Political Engagement

ERIC Educational Resources Information Center

Bloch-Schulman, Stephen; Jovanovic, Spoma

2010-01-01

Political disengagement in higher education is at a crisis point. Despite increased community involvement by students--due in large part to the service-learning movement and to the small but hopeful upsurge in the elections of 2008--there remains a disconnect between young citizens and the political world, leaving them outside the collective…

Mesenteric lipoblastoma presenting as a small intestinal volvulus in an infant: A case report and literature review.

PubMed

Nagano, Yuka; Uchida, Keiichi; Inoue, Mikihiro; Ide, Shozo; Shimura, Tadanobu; Hashimoto, Kiyoshi; Koike, Yuki; Kusunoki, Masato

2017-01-01

A 1-year-old boy with no underlying disorder presented with non-bilious vomiting since 4 days before admission. He was referred to our hospital and was diagnosed with a small bowel obstruction due to an intraabdominal tumor. Laparotomy revealed an intestinal volvulus with a soft and lobulated tumor arising from the mesentery. The resected tumor with a small part of the small bowel was diagnosed as lipoblastoma histologically. From a literature review, mesenteric lipoblastoma with an intestinal volvulus showed different characteristics such as greater frequency of vomiting and less frequency of abdominal mass as clinical symptoms, and the size of the tumor was smaller than that of the tumor without the intestinal volvulus. Copyright © 2013. Published by Elsevier Taiwan.

2017 White Paper: rise of hybrid LBA/LCMS immunogenicity assays (Part 2: hybrid LBA/LCMS biotherapeutics, biomarkers & immunogenicity assays and regulatory agencies' inputs).

PubMed

Neubert, Hendrik; Song, An; Lee, Anita; Wei, Cong; Duggan, Jeff; Xu, Keyang; Woolf, Eric; Evans, Chris; Palandra, Joe; Laterza, Omar; Amur, Shashi; Berger, Isabella; Bustard, Mark; Cancilla, Mark; Chen, Shang-Chiung; Cho, Seongeun Julia; Ciccimaro, Eugene; Cludts, Isabelle; Cocea, Laurent; D'Arienzo, Celia; Danan-Leon, Lieza; Donato, Lorella Di; Garofolo, Fabio; Haidar, Sam; Ishii-Watabe, Akiko; Jiang, Hao; Kadavil, John; Kassim, Sean; Kurki, Pekka; Blaye, Olivier Le; Liu, Kai; Mathews, Rod; Lima Santos, Gustavo Mendes; Niwa, Makoto; Pedras-Vasconcelos, João; Qian, Mark; Rago, Brian; Saad, Ola; Saito, Yoshiro; Savoie, Natasha; Su, Dian; Szapacs, Matthew; Tampal, Nilufer; Vinter, Stephen; Wang, Jian; Welink, Jan; Whale, Emma; Wilson, Amanda; Xue, Y-J

2017-12-01

The 2017 11th Workshop on Recent Issues in Bioanalysis (11th WRIB) took place in Los Angeles/Universal City, California on 3-7 April 2017 with participation of close to 750 professionals from pharmaceutical/biopharmaceutical companies, biotechnology companies, contract research organizations and regulatory agencies worldwide. WRIB was once again a 5-day, weeklong event - a full immersion week of bioanalysis, biomarkers and immunogenicity. As usual, it was specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest including both small and large molecule analysis involving LCMS, hybrid ligand binding assay (LBA)/LCMS and LBA approaches. This 2017 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. Due to its length, the 2017 edition of this comprehensive White Paper has been divided into three parts for editorial reasons. This publication (Part 2) covers the recommendations for biotherapeutics, biomarkers and immunogenicity assays using hybrid LBA/LCMS and regulatory agencies' inputs. Part 1 (LCMS for small molecules, peptides and small molecule biomarkers) and Part 3 (LBA: immunogenicity, biomarkers and pharmacokinetic assays) are published in Volume 9 of Bioanalysis, issues 22 and 24 (2017), respectively.

2017 White Paper on recent issues in bioanalysis: a global perspective on immunogenicity guidelines & biomarker assay performance (Part 3 - LBA: immunogenicity, biomarkers and PK assays).

PubMed

Gupta, Shalini; Richards, Susan; Amaravadi, Lakshmi; Piccoli, Steven; Desilva, Binodh; Pillutla, Renuka; Stevenson, Lauren; Mehta, Devangi; Carrasco-Triguero, Montserrat; Neely, Robert; Partridge, Michael; Staack, Roland F; Zhao, Xuemei; Gorovits, Boris; Kolaitis, Gerry; Sumner, Giane; Stubenrauch, Kay-Gunnar; Zou, Linglong; Amur, Shashi; Beaver, Chris; Berger, Isabella; Berisha, Flora; Birnboeck, Herbert; Bower, Joe; Cho, Seongeun Julia; Cludts, Isabelle; Cocea, Laurent; Donato, Lorella Di; Fischer, Saloumeh; Fraser, Stephanie; Garofolo, Fabio; Haidar, Sam; Haulenbeek, Jonathan; Hottenstein, Charles; Hu, Jenny; Ishii-Watabe, Akiko; Islam, Rafiq; Jani, Darshana; Kadavil, John; Kamerud, John; Kramer, Daniel; Kurki, Pekka; MacMannis, Stephen; McNally, Jim; Mullan, Ashley; Papadimitriou, Apollon; Pedras-Vasconcelos, João; Ray, Soma; Safavi, Afshin; Saito, Yoshiro; Savoie, Natasha; Fjording, Marianne Scheel; Scheibner, Kara; Smeraglia, John; Song, An; Stouffer, Bruce; Tampal, Nilufer; der Strate, Barry van; Verch, Thorsten; Welink, Jan; Xu, Yuanxin; Yang, Tong-Yuan; Yengi, Lilian; Zeng, Jianing; Zhang, Yan; Zhang, Yanhua; Zoog, Stephen

2017-12-01

The 2017 11th Workshop on Recent Issues in Bioanalysis took place in Los Angeles/Universal City, California, on 3-7 April 2017 with participation of close to 750 professionals from pharmaceutical/biopharmaceutical companies, biotechnology companies, contract research organizations and regulatory agencies worldwide. WRIB was once again a 5-day, week-long event - a full immersion week of bioanalysis, biomarkers and immunogenicity. As usual, it was specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest including both small- and large-molecule analysis involving LC-MS, hybrid ligand-binding assay (LBA)/LC-MS and LBA approaches. This 2017 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. Due to its length, the 2017 edition of this comprehensive White Paper has been divided into three parts for editorial reasons. This publication (Part 3) covers the recommendations for large-molecule bioanalysis, biomarkers and immunogenicity using LBA. Part 1 (LC-MS for small molecules, peptides and small molecule biomarkers) and Part 2 (hybrid LBA/LC-MS for biotherapeutics and regulatory agencies' inputs) are published in volume 9 of Bioanalysis, issues 22 and 23 (2017), respectively.

2016 White Paper on recent issues in bioanalysis: focus on biomarker assay validation (BAV): (Part 3 - LBA, biomarkers and immunogenicity).

PubMed

Richards, Susan; Amaravadi, Lakshmi; Pillutla, Renuka; Birnboeck, Herbert; Torri, Albert; Cowan, Kyra J; Papadimitriou, Apollon; Garofolo, Fabio; Satterwhite, Christina; Piccoli, Steven; Wu, Bonnie; Krinos-Fiorotti, Corinna; Allinson, John; Berisha, Flora; Cocea, Laurent; Croft, Stephanie; Fraser, Stephanie; Galliccia, Fabrizio; Gorovits, Boris; Gupta, Swati; Gupta, Vinita; Haidar, Sam; Hottenstein, Charles; Ishii-Watabe, Akiko; Jani, Darshana; Kadavil, John; Kamerud, John; Kramer, Daniel; Litwin, Virginia; Lima Santos, Gustavo Mendes; Nelson, Robert; Ni, Yan; Pedras-Vasconcelos, João; Qiu, Yongchang; Rhyne, Paul; Safavi, Afshin; Saito, Yoshiro; Savoie, Natasha; Scheibner, Kara; Schick, Eginhard; Siguenza, Patricia Y; Smeraglia, John; Staack, Roland F; Subramanyam, Meena; Sumner, Giane; Thway, Theingi; Uhlinger, David; Ullmann, Martin; Vitaliti, Alessandra; Welink, Jan; Whiting, Chan C; Xue, Li; Zeng, Rong

2016-12-01

The 2016 10th Workshop on Recent Issues in Bioanalysis (10th WRIB) took place in Orlando, Florida with participation of close to 700 professionals from pharmaceutical/biopharmaceutical companies, biotechnology companies, contract research organizations, and regulatory agencies worldwide. WRIB was once again a weeklong event - A Full Immersion Week of Bioanalysis for PK, Biomarkers and Immunogenicity. As usual, it is specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest including both small and large molecules involving LCMS, hybrid LBA/LCMS, and LBA approaches, with the focus on PK, biomarkers and immunogenicity. This 2016 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. This White Paper is published in 3 parts due to length. This part (Part 3) discusses the recommendations for large molecule bioanalysis using LBA, biomarkers and immunogenicity. Parts 1 (small molecule bioanalysis using LCMS) and Part 2 (Hybrid LBA/LCMS and regulatory inputs from major global health authorities) have been published in the Bioanalysis journal, issues 22 and 23, respectively.

Macroautophagy and microautophagy in relation to vacuole formation in mesophyll cells of Dendrobium tepals.

PubMed

van Doorn, Wouter G; Kirasak, Kanjana; Ketsa, Saichol

2015-04-01

Prior to flower opening, mesophyll cells at the vascular bundles of Dendrobium tepals showed a large increase in vacuolar volume, partially at the expense of the cytoplasm. Electron micrographs indicated that this increase in vacuolar volume was mainly due to vacuole fusion. Macroautophagous structures typical of plant cells were observed. Only a small part of the decrease in cytoplasmic volume seemed due to macroautophagy. The vacuoles contained vesicles of various types, including multilamellar bodies. It was not clear if these vacuolar inclusions were due to macroautophagy or microautophagy. Only a single structure was observed of a protruding vacuole, indicating microautophagy. It is concluded that macroautophagy occurs in these cells but its role in vacuole formation seems small, while a possible role of microautophagy in vacuole formation might be hypothesized. Careful labeling of organelle membranes seems required to advance our insight in plant macro- and microautophagy and their roles in vacuole formation. Copyright © 2015 Elsevier GmbH. All rights reserved.

Manufacturing of GLARE Parts and Structures

NASA Astrophysics Data System (ADS)

Sinke, J.

2003-07-01

GLARE is a hybrid material consisting of alternating layers of metal sheets and composite layers, requiring special attention when manufacturing of parts and structures is concerned. On one hand the applicable manufacturing processes for GLARE are limited, on the other hand, due to the constituents and composition of the laminate, it offers new opportunities for production. One of the opportunities is the manufacture of very large skin panels by lay-up techniques. Lay-up techniques are common for full composites, but uncommon for metallic structures. Nevertheless, large GLARE skin panels are made by lay-up processes. In addition, the sequences of forming and laminating processes, that can be selected, offer manufacturing options that are not applicable to metals or full composites. With respect to conventional manufacturing processes, the possibilities for Fibre Metal Laminates in general, are limited. The limits are partly due to the different failure modes, partly due to the properties of the constituents in the laminate. For machining processes: the wear of the cutting tools during machining operations of GLARE stems from the abrasive nature of the glass fibres. For the forming processes: the limited formability, expressed by a small failure strain, is related to the glass fibres. However, although these manufacturing issues may restrict the use of manufacturing processes for FMLs, application of these laminates in aircraft is not hindered.

"Elementar, Meu Caro Watson": Jô Soares Reinvents the Classics

ERIC Educational Resources Information Center

Martin, Sarah

2016-01-01

Detective fiction--with its roots primarily in Europe and the United States--was slow to catch on in Brazil, where national authors did not attempt more than small forays into the genre for most of the twentieth century. This was due in large part to the particularities of Brazilian society, in which law enforcement agencies, rife with corruption,…

Electromagnetic stimulation of the ultrasonic signal for nondestructive detection of the ferromagnetic inclusions and flaws

NASA Astrophysics Data System (ADS)

Finkel, Peter

2007-03-01

It was recently shown that thermal or optical stimulation can be used to increase sensitivity of the conventional nondestructive ultrasonic detection of the small crack, flaws and inclusions in a ferromagnetic thin-walled parts. We proposed another method based on electromagnetic modulation of the ultrasonic scattered signal from the inclusions or defects. The electromagnetically induced high density current pulse produces stresses which alter the ultrasonic waves scanning the part with the defect and modulate ultrasonic signal. The excited electromagnetic field can produces crack-opening due to Lorentz forces that increase the ultrasonic reflection. The Joule heating associated with the high density current, and consequent thermal stresses may cause both crack-closure, as well as crack-opening, depending on various factors. Experimental data is presented here for the case of a small cracks near small holes in thin-walled structures. The measurements were taken at 2-10 MHz with a Lamb wave wedge transducer. It is shown that electromagnetic transient modulation of the ultrasonic echo pulse tone-burst suggest that this method could be used to enhance detection of small cracks and ferromagnetic inclusions in thin walled metallic structures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Butler, W.J.; Kalasinski, L.A.

In this paper, a generalized logistic regression model for correlated observations is used to analyze epidemiologic data on the frequency of spontaneous abortion among a group of women office workers. The results are compared to those obtained from the use of the standard logistic regression model that assumes statistical independence among all the pregnancies contributed by one woman. In this example, the correlation among pregnancies from the same woman is fairly small and did not have a substantial impact on the magnitude of estimates of parameters of the model. This is due at least partly to the small average numbermore » of pregnancies contributed by each woman.« less

Analysis of the Laser Drilling Process for the Combination with a Single-Lip Deep Hole Drilling Process with Small Diameters

NASA Astrophysics Data System (ADS)

Biermann, Dirk; Heilmann, Markus

Due to the tendency of downsizing of components, also the industrial relevance of bore holes with small diameters and high length-to-diameter ratios rises with the growing requirements on parts. In these applications, the combination of laser pre-drilling and single-lip deep hole drilling can shorten the process chain in machining components with non-planar surfaces, or can reduce tool wear in machining case-hardened materials. In this research, the combination of these processes was realized and investigated for the very first time.

The heterogeneity statistic I(2) can be biased in small meta-analyses.

PubMed

von Hippel, Paul T

2015-04-14

Estimated effects vary across studies, partly because of random sampling error and partly because of heterogeneity. In meta-analysis, the fraction of variance that is due to heterogeneity is estimated by the statistic I(2). We calculate the bias of I(2), focusing on the situation where the number of studies in the meta-analysis is small. Small meta-analyses are common; in the Cochrane Library, the median number of studies per meta-analysis is 7 or fewer. We use Mathematica software to calculate the expectation and bias of I(2). I(2) has a substantial bias when the number of studies is small. The bias is positive when the true fraction of heterogeneity is small, but the bias is typically negative when the true fraction of heterogeneity is large. For example, with 7 studies and no true heterogeneity, I(2) will overestimate heterogeneity by an average of 12 percentage points, but with 7 studies and 80 percent true heterogeneity, I(2) can underestimate heterogeneity by an average of 28 percentage points. Biases of 12-28 percentage points are not trivial when one considers that, in the Cochrane Library, the median I(2) estimate is 21 percent. The point estimate I(2) should be interpreted cautiously when a meta-analysis has few studies. In small meta-analyses, confidence intervals should supplement or replace the biased point estimate I(2).

[Considering the current state of fire safety in Taiwan's care environment from the perspective of the nation's worst recent hospital fire].

PubMed

Tseng, Wei-Wen; Shih, Chung-Liang; Chien, Shen-Wen

2013-04-01

Taiwan's worst hospital fire in history on October 23rd, 2012 at Sinying Hospital's Bei-Men Branch resulted in 13 elderly patient deaths and over 70 injuries. The heavy casualties were due in part to the serious condition of patients. Some patients on life-support machines were unable to move or be moved. This disaster highlights the issue of fire safety in small-scale hospitals that have transformed existing hospital space into special care environments for elderly patients. Compared with medical centers and general hospitals, these small-scale health facilities are ill equipped to deal properly with fire safety management and emergency response issues due to inadequate fire protection facilities, fire safety equipment, and human resources. Small-scale facilities that offer health care and medical services to mostly immobile patients face fire risks that differ significantly from general health care facilities. This paper focuses on fire risks in small-scale facilities and suggests a strategy for fire prevention and emergency response procedures, including countermeasures for fire risk assessment, management, and emergency response, in order to improve fire safety at these institutions in Taiwan.

Influence of the recycled material percentage on the rheological behaviour of HDPE for injection moulding process.

PubMed

Javierre, C; Clavería, I; Ponz, L; Aísa, J; Fernández, A

2007-01-01

The amount of polymer material wasted during thermoplastic injection moulding is very high. It comes from both the feed system of the part, and parts necessary to set up the mould, as well as the scrap generated along the process due to quality problems. The residues are managed through polymer recycling that allows reuse of the materials in the manufacturing injection process. Recycling mills convert the parts into small pieces that are used as feed material for injection, by mixing the recycled feedstock in different percentages with raw material. This mixture of both raw and recycled material modifies material properties according to the percentage of recycled material introduced. Some of the properties affected by this modification are those related to rheologic behaviour, which strongly conditions the future injection moulding process. This paper analyzes the rheologic behaviour of material with different percentages of recycled material by means of a capillary rheometer, and evaluates the influence of the corresponding viscosity curves obtained on the injection moulding process, where small variations of parameters related to rheological behaviour, such as pressure or clamping force, can be critical to the viability and cost of the parts manufactured by injection moulding.

Discussion on back-to-back two-stage centrifugal compressor compact design techniques

NASA Astrophysics Data System (ADS)

Huo, Lei; Liu, Huoxing

2013-12-01

Design a small flow back-to-back two-stage centrifugal compressor in the aviation turbocharger, the compressor is compact structure, small axial length, light weighted. Stationary parts have a great influence on their overall performance decline. Therefore, the stationary part of the back-to-back two-stage centrifugal compressor should pay full attention to the diffuser, bend, return vane and volute design. Volute also impact downstream return vane, making the flow in circumferential direction is not uniformed, and several blade angle of attack is drastically changed in downstream of the volute with the airflow can not be rotated to required angle. Loading of high-pressure rotor blades change due to non-uniformed of flow in circumferential direction, which makes individual blade load distribution changed, and affected blade passage load decreased to reduce the capability of work, the tip low speed range increases.

Changes in children's time with parents: United States, 1981-1997.

PubMed

Sandberg, J F; Hofferth, S L

2001-08-01

In this paper we examine changes in the time American children spent with their parents between 1981 and 1997, and the contribution to these changes made by shifting patterns of female labor force participation, family structure, and parental education. We decompose changes into the parts attributable to changes in demographic characteristics and the parts probably due to changes in behavior. In general, children's time with parents did not decrease over the period; in two-parent families it increased substantially. Population-level changes in demographic characteristics exerted only small direct effects on the time children spent with parents.

Searching for Gay-Friendly Colleges: How Guidance Counselors Can Help Their Gay Students

ERIC Educational Resources Information Center

Cook, Jeffrey D.

2002-01-01

The degree to which the lives of America's gay youth have improved over the past decade is staggering. In no small part due to frequent exposure to gay issues and gay people in the popular media, there is greater acceptance of differences in sexual orientation, and in many communities youth can access one of hundreds of gay student associations…

Fire weather and likelihood: characterizing climate space for fire occurrence and extent in Puerto Rico

Treesearch

Ashley E. Van Beusekom; William A. Gould; A. Carolina Monmany; Azad Henareh Khalyani; Maya Quiñones; Stephen J. Fain; Maria José Andrade-Núñez; Grizelle González

2018-01-01

Abstract Assessing the relationships between weather patterns and the likelihood of fire occurrence in the Caribbean has not been as central to climate change research as in temperate regions, due in part to the smaller extent of individual fires. However, the cumulative effect of small frequent fires can shape large landscapes, and fire-prone ecosystems are abundant...

Using Blogs to Help Language Students to Develop Reflective Learning Strategies: Towards a Pedagogical Framework

ERIC Educational Resources Information Center

Hourigan, Triona; Murray, Liam

2010-01-01

Due to the social changes brought about in no small part by Web 2.0 tools, the potential impact of the blog writing phenomenon upon teaching and learning contexts reveals an important area for consideration for all university educators, and in particular for e-learning practitioners. Today, web users may access a wide variety of media to express…

A preliminary aboveground live biomass model for understory hardwoods from Arkansas, Louisiana, and Mississippi

Treesearch

Don C. Bragg; D. Andrew. Scott

2014-01-01

Hardwood understories can contribute significantly to total ecosystem biomass and fuel loads, but few models are available to directly quantify this component. In part, this is due to the small size of the hardwoods. Many understory trees simply do not reach the height required to determine diameter at breast height (d.b.h.), so conventional models (e.g., the National...

Molecular Dynamics Characterization of the Conformational Landscape of Small Peptides: A Series of Hands-On Collaborative Practical Sessions for Undergraduate Students

ERIC Educational Resources Information Center

Rodrigues, João P. G. L. M.; Melquiond, Adrien S. J.; Bonvin, Alexandre M. J. J.

2016-01-01

Molecular modelling and simulations are nowadays an integral part of research in areas ranging from physics to chemistry to structural biology, as well as pharmaceutical drug design. This popularity is due to the development of high-performance hardware and of accurate and efficient molecular mechanics algorithms by the scientific community. These…

2016 White Paper on recent issues in bioanalysis: focus on biomarker assay validation (BAV): (Part 2 - Hybrid LBA/LCMS and input from regulatory agencies).

PubMed

Song, An; Lee, Anita; Garofolo, Fabio; Kaur, Surinder; Duggan, Jeff; Evans, Christopher; Palandra, Joe; Donato, Lorella Di; Xu, Keyang; Bauer, Ronald; Bustard, Mark; Chen, Linzhi; Cocea, Laurent; Croft, Stephanie; Galliccia, Fabrizio; Haidar, Sam; Hughes, Nicola; Ishii-Watabe, Akiko; Islam, Rafiqul; Jones, Barry; Kadavil, John; Krantz, Carsten; Lima Santos, Gustavo Mendes; Olah, Timothy; Pedras-Vasconcelos, João; Staelens, Ludovicus; Saito, Yoshiro; Savoie, Natasha; Scheibner, Kara; Spitz, Susan; Tampal, Nilufer; Thomas, Eric; Vinter, Stephen; Wakelin-Smith, Jason; Welink, Jan; Zeng, Jianing; Zhou, Shaolian

2016-12-01

The 2016 10th Workshop on Recent Issues in Bioanalysis (10 th WRIB) took place in Orlando, Florida with participation of close to 700 professionals from pharmaceutical/biopharmaceutical companies, biotechnology companies, contract research organizations, and regulatory agencies worldwide. WRIB was once again a 5-day, weeklong event - A Full Immersion Week of Bioanalysis including Biomarkers and Immunogenicity. As usual, it is specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest including both small and large molecules involving LCMS, hybrid LBA/LCMS, and LBA approaches, with the focus on biomarkers and immunogenicity. This 2016 White Paper encompasses recommendations emerging from the extensive discussions held during the workshop, and is aimed to provide the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to enable advances in scientific excellence, improved quality and better regulatory compliance. This White Paper is published in 3 parts due to length. This part (Part 2) discusses the recommendations for Hybrid LBA/LCMS and regulatory inputs from major global health authorities. Parts 1 (small molecule bioanalysis using LCMS) and Part 3 (large molecule bioanalysis using LBA, biomarkers and immunogenicity) have been published in the Bioanalysis journal, issues 22 and 23, respectively.

Collision group and renormalization of the Boltzmann collision integral.

PubMed

Saveliev, V L; Nanbu, K

2002-05-01

On the basis of a recently discovered collision group [V. L. Saveliev, in Rarefied Gas Dynamics: 22nd International Symposium, edited by T. J. Bartel and M. Gallis, AIP Conf. Proc. No. 585 (AIP, Melville, NY, 2001), p. 101], the Boltzmann collision integral is exactly rewritten in two parts. The first part describes the scattering of particles with small angles. In this part the infinity due to the infinite cross sections is extracted from the Boltzmann collision integral. Moreover, the Boltzmann collision integral is represented as a divergence of the flow in velocity space. Owing to this, the role of collisions in the kinetic equation can be interpreted in terms of the nonlocal friction force that depends on the distribution function.

Collision group and renormalization of the Boltzmann collision integral

NASA Astrophysics Data System (ADS)

Saveliev, V. L.; Nanbu, K.

2002-05-01

On the basis of a recently discovered collision group [V. L. Saveliev, in Rarefied Gas Dynamics: 22nd International Symposium, edited by T. J. Bartel and M. Gallis, AIP Conf. Proc. No. 585 (AIP, Melville, NY, 2001), p. 101], the Boltzmann collision integral is exactly rewritten in two parts. The first part describes the scattering of particles with small angles. In this part the infinity due to the infinite cross sections is extracted from the Boltzmann collision integral. Moreover, the Boltzmann collision integral is represented as a divergence of the flow in velocity space. Owing to this, the role of collisions in the kinetic equation can be interpreted in terms of the nonlocal friction force that depends on the distribution function.

Social and Economic Impact of Solar Electricity at Schuchuli Village

NASA Technical Reports Server (NTRS)

Bifano, W. J.; Ratajczak, A. F.; Bahr, D. M.; Garrett, B. G.

1979-01-01

Schuchuli, a small remote village on the Papago Indian Reservation in southwest Arizona, is 27 kilometers (17 miles) from the nearest available utility power. Its lack of conventional power is due to the prohibitive cost of supplying a small electrical load with a long-distance distribution line. Furthermore, alternate energy sources are expensive and place a burden on the resources of the villagers. On December 16, 1978, as part of a federally funded project, a solar cell power system was put into operation at Schuchuli. The system powers the village water pump, lighting for homes and other village buildings, family refrigerators and a communal washing machine and sewing machine.

Dielectric response of a nondegenerate electron gas in semiconductor nanocrystallites

NASA Astrophysics Data System (ADS)

van Faassen, E.

1998-12-01

We investigate the low-frequency dielectric response of a dilute electron gas in a small spherical semiconductor particle. The flow of the electrons is described by hydrodynamic equations which incorporate the electrostatic interactions between the electrons in a self-consistent fashion. In the low-frequency regime, the dielectric loss is small and proportional to the frequency, despite substantial field penetration into the semiconductor. The loss remains small even for high doping levels due to effective cancellation between field-induced drift and diffusion. The model is used to estimate the complex dielectric constant of a system of weakly conducting nanosized semiconductor particles. The most prominent manifestation of spatial dispersion is that photoinduced changes in the real and imaginary parts of the dielectric constant are positive and of comparable magnitude.

National Forest Health Monitoring Program Wisconsin Street Tree Assessment 2002-2003, NA-FR-02-08 Brief

Treesearch

Anne Buckelew Cumming; Daniel Twardus; Robert Hoehn; David Nowak; Manfred Mielke; Richard Rideout; Helen Butalla; Patricia Lebow

2008-01-01

Street trees grow along roadways within the public right-ofway. They are an important part of the urban forest due to their visibility to motorists and pedestrians, even if their numbers represent a small fraction of trees in urban areas. Little data are available that describe this resource at a large, statewide scale. Street trees, a subpopulation of the urban forest...

National Forest Health Monitoring Program Wisconsin Street Tree Assessment 2002-2003, NA-FR-02-08

Treesearch

Anne Cumming; Daniel Twardus; Robert Hoehn; David Nowak; Manfred Mielke; Richard Rideout; Helen Butalla; Patricia Lebow

2008-01-01

Street trees grow along roadways within the public right-of-way. They are an important part of the urban forest due to their visibility to motorists and pedestrians, even if their numbers represent a small fraction of trees in urban areas. Little data are available that describe this resource at a large, statewide scale. In 2000, the Forest Service, U.S....

The sand bag model of the dispersion of the cosmic body in the atmosphere

NASA Technical Reports Server (NTRS)

Teterev, A. V.; Nemchinov, I. V.

1993-01-01

The strength of the extraterrestrial bodies depends on their structure, composition, dimensions, and the history of this body. The fragmentation of the body due to aerodynamic stresses begins at sufficiently large heights above the surface of the Earth. The process of fragmentation and dispersion of the fragments usually is studied by the hydrodynamic or even gasdynamic models. If the fragmentation process begins due to the initial cracks and faults of the body, or this body consists of large boulders glued by ice, the strength of these boulders after fragmentation remains higher than the aerodynamic stresses exerted at the remaining part of the body. It is supposed that fragmentation occurs at initial moment t = 0 at some height z(sub o) above the surface of the air, these fragments remain solid. The possibility of further fragmentation during the remaining part of the trajectory is not taken into account. If the number of these parts is large enough and their size is small in comparison to the initial radius of the body than we can use the sand bag model proposed in qualitative form.

Alignment issues, correlation techniques and their assessment for a visible light imaging-based 3D printer quality control system

NASA Astrophysics Data System (ADS)

Straub, Jeremy

2016-05-01

Quality control is critical to manufacturing. Frequently, techniques are used to define object conformity bounds, based on historical quality data. This paper considers techniques for bespoke and small batch jobs that are not statistical model based. These techniques also serve jobs where 100% validation is needed due to the mission or safety critical nature of particular parts. One issue with this type of system is alignment discrepancies between the generated model and the physical part. This paper discusses and evaluates techniques for characterizing and correcting alignment issues between the projected and perceived data sets to prevent errors attributable to misalignment.

Teaching Quantum Mechanics with qCraft: Outreach and Video Games

NASA Astrophysics Data System (ADS)

Kubica, Aleksander; Chatwin-Davies, Aidan; Michalakis, Spyridon

Why is quantum mechanics considered a hard and inaccessible subject? Part of the difficulty is due to the nature of the subject itself. However, no small part of the difficulty is its pedagogy, which often relies on out-of-date historical motivation and experimental evidence that is disconnected from day-to-day experiences. In this first talk, we explore ways in which video games are well-suited to teaching quantum mechanics, in particular with regards to building intuition, as well as some of their limitations. We then illustrate these considerations through qCraft, an extension for Minecraft that incorporates aspects of quantum mechanics into the game.

2015 White Paper on recent issues in bioanalysis: focus on new technologies and biomarkers (Part 2 - hybrid LBA/LCMS and input from regulatory agencies).

PubMed

Ackermann, Brad; Neubert, Hendrik; Hughes, Nicola; Garofolo, Fabio; Abberley, Lee; Alley, Stephen C; Brown-Augsburger, Patricia; Bustard, Mark; Chen, Lin-Zhi; Heinrich, Julia; Katori, Noriko; Kaur, Surinder; Kirkovsky, Leo; Laterza, Omar F; Le Blaye, Olivier; Lévesque, Ann; Santos, Gustavo Mendes Lima; Olah, Timothy; Savoie, Natasha; Skelly, Michael; Spitz, Susan; Szapacs, Matthew; Tampal, Nilufer; Wang, Jian; Welink, Jan; Wieling, Jaap; Haidar, Sam; Vinter, Stephen; Whale, Emma; Witte, Bärbel

2015-12-01

The 2015 9th Workshop on Recent Issues in Bioanalysis (9th WRIB) took place in Miami, Florida with participation of over 600 professionals from pharmaceutical and biopharmaceutical companies, biotechnology companies, contract research organizations and regulatory agencies worldwide. It is once again a 5-day week long event - a full immersion bioanalytical week - specifically designed to facilitate sharing, reviewing, discussing and agreeing on approaches to address the most current issues of interest in bioanalysis. The topics covered included both small and large molecules, and involved LCMS, hybrid LBA/LCMS, LBA approaches including the focus on biomarkers and immunogenicity. This 2015 White Paper encompasses recommendations that emerged from the extensive discussions held during the workshop, and is aimed at providing the bioanalytical community with key information and practical solutions on topics and issues addressed, in an effort to advance scientific excellence, improve quality and deliver better regulatory compliance. Due to its length, the 2015 edition of this comprehensive White Paper has been divided into three parts. Part 2 covers the recommendations for hybrid LBA/LCMS and regulatory agencies' inputs. Part 1 (small molecule bioanalysis using LCMS) and Part 3 (large molecule bioanalysis using LBA, biomarkers and immunogenicity) will be published in volume 7 of Bioanalysis, issues 22 and 24, respectively.

Microstructure characterization of 316L deformed at high strain rates using EBSD

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yvell, K., E-mail: kyv@du.se

2016-12-15

Specimens from split Hopkinson pressure bar experiments, at strain rates between ~ 1000–9000 s{sup −1} at room temperature and 500 °C, have been studied using electron backscatter diffraction. No significant differences in the microstructures were observed at different strain rates, but were observed for different strains and temperatures. Size distribution for subgrains with boundary misorientations > 2° can be described as a bimodal lognormal area distribution. The distributions were found to change due to deformation. Part of the distribution describing the large subgrains decreased while the distribution for the small subgrains increased. This is in accordance with deformation being heterogeneousmore » and successively spreading into the undeformed part of individual grains. The variation of the average size for the small subgrain distribution varies with strain but not with strain rate in the tested interval. The mean free distance for dislocation slip, interpreted here as the average size of the distribution of small subgrains, displays a variation with plastic strain which is in accordance with the different stages in the stress-strain curves. The rate of deformation hardening in the linear hardening range is accurately calculated using the variation of the small subgrain size with strain. - Highlights: •Only changes in strain, not strain rate, gave differences in the microstructure. •A bimodal lognormal size distribution was found to describe the size distribution. •Variation of the subgrain fraction sizes agrees with models for heterogeneous slip. •Variation of subgrain size with strain describes part of the stress strain curve.« less

Analysis and modeling of subgrid scalar mixing using numerical data

NASA Technical Reports Server (NTRS)

Girimaji, Sharath S.; Zhou, YE

1995-01-01

Direct numerical simulations (DNS) of passive scalar mixing in isotropic turbulence is used to study, analyze and, subsequently, model the role of small (subgrid) scales in the mixing process. In particular, we attempt to model the dissipation of the large scale (supergrid) scalar fluctuations caused by the subgrid scales by decomposing it into two parts: (1) the effect due to the interaction among the subgrid scales; and (2) the effect due to interaction between the supergrid and the subgrid scales. Model comparisons with DNS data show good agreement. This model is expected to be useful in the large eddy simulations of scalar mixing and reaction.

Springback effects during single point incremental forming: Optimization of the tool path

NASA Astrophysics Data System (ADS)

Giraud-Moreau, Laurence; Belchior, Jérémy; Lafon, Pascal; Lotoing, Lionel; Cherouat, Abel; Courtielle, Eric; Guines, Dominique; Maurine, Patrick

2018-05-01

Incremental sheet forming is an emerging process to manufacture sheet metal parts. This process is more flexible than conventional one and well suited for small batch production or prototyping. During the process, the sheet metal blank is clamped by a blank-holder and a small-size smooth-end hemispherical tool moves along a user-specified path to deform the sheet incrementally. Classical three-axis CNC milling machines, dedicated structure or serial robots can be used to perform the forming operation. Whatever the considered machine, large deviations between the theoretical shape and the real shape can be observed after the part unclamping. These deviations are due to both the lack of stiffness of the machine and residual stresses in the part at the end of the forming stage. In this paper, an optimization strategy of the tool path is proposed in order to minimize the elastic springback induced by residual stresses after unclamping. A finite element model of the SPIF process allowing the shape prediction of the formed part with a good accuracy is defined. This model, based on appropriated assumptions, leads to calculation times which remain compatible with an optimization procedure. The proposed optimization method is based on an iterative correction of the tool path. The efficiency of the method is shown by an improvement of the final shape.

Out of the SHADOW: watch parts in the spotlight -- laser beam microwelding of delicate watch components

NASA Astrophysics Data System (ADS)

Kramer, Thorsten; Olowinsky, Alexander M.

2003-07-01

Conventional joining techniques like press fitting or crimping require the application of mechanical forces to the parts which, in combination with the tolerances of both parts to be joined, lead to imprecision and poor tensile strength. In contrast, laser beam micro welding provides consistent joining and high flexibility and it acts as an alternative as long as press fitting, crimping, screwing or gluing are not capable of batch production. Different parts and even different metals can be joined in a non-contact process at feed rates of up to 60 m/min and with weld seam lengths from 0.6 mm to 15.7 mm. Due to the low energy input, typically 1 J to 6 J, a weld width as small as 50 μm and a weld depth as small as 20 μm have been attained. This results in low distortion of the joined watch components. Since the first applications of laser beam micro welding of watch components showed promising results, the process has further been enhanced using the SHADOW technique. Aspects of the technique such as tensile strength, geometry and precision of the weld seam as well as the acceptance amongst the -mostly conservative- watch manufacturers have been improved.

A wide variety of injection molding technologies is now applicable to small series and mass production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bloß, P., E-mail: bloss@kuz-leipzig.de, E-mail: juettner@kuz-leipzig.de, E-mail: jacob@kuz-leipzig.de, E-mail: loeser@kuz-leipzig.de, E-mail: michaelis@kuz-leipzig.de, E-mail: krajewsky@kuz-leipzig.de; Jüttner, G., E-mail: bloss@kuz-leipzig.de, E-mail: juettner@kuz-leipzig.de, E-mail: jacob@kuz-leipzig.de, E-mail: loeser@kuz-leipzig.de, E-mail: michaelis@kuz-leipzig.de, E-mail: krajewsky@kuz-leipzig.de; Jacob, S., E-mail: bloss@kuz-leipzig.de, E-mail: juettner@kuz-leipzig.de, E-mail: jacob@kuz-leipzig.de, E-mail: loeser@kuz-leipzig.de, E-mail: michaelis@kuz-leipzig.de, E-mail: krajewsky@kuz-leipzig.de

2014-05-15

Micro plastic parts open new fields for application, e. g., to electronics, sensor technologies, optics, and medical engineering. Before micro parts can go to mass production, there is a strong need of having the possibility for testing different designs and materials including material combinations. Hence, flexible individual technical and technological solutions for processing are necessary. To manufacture high quality micro parts, a micro injection moulding machine named formicaPlast based on a two-step plunger injection technology was developed. Resulting from its design, the residence time and the accuracy problems for managing small shot volumes with reproducible high accuracy are uncompromisingly solved.more » Due to their simple geometry possessing smooth transitions and non adherent inner surfaces, the plunger units allow to process 'all' thermoplastics from polyolefines to high performance polymers, optical clear polymers, thermally sensitive bioresorbables, highly filled systems (the so-called powder injection molding PIM), and liquid silicon rubber (LSR, here with a special kit). The applied platform strategy in the 1K and 2K version allows integrating automation for assembling, handling and packaging. A perpendicular arrangement allows encapsulation of inserts, also partially, and integration of this machine into process chains. Considering a wide variety of different parts consisting of different materials, the high potential of the technology is demonstrated. Based on challenging industrial parts from electronic applications (2K micro MID and bump mat, where both are highly structured parts), the technological solutions are presented in more detail.« less

Generalized Abstract Symbolic Summaries

NASA Technical Reports Server (NTRS)

Person, Suzette; Dwyer, Matthew B.

2009-01-01

Current techniques for validating and verifying program changes often consider the entire program, even for small changes, leading to enormous V&V costs over a program s lifetime. This is due, in large part, to the use of syntactic program techniques which are necessarily imprecise. Building on recent advances in symbolic execution of heap manipulating programs, in this paper, we develop techniques for performing abstract semantic differencing of program behaviors that offer the potential for improved precision.

[Research progress on hydrological scaling].

PubMed

Liu, Jianmei; Pei, Tiefan

2003-12-01

With the development of hydrology and the extending effect of mankind on environment, scale issue has become a great challenge to many hydrologists due to the stochasticism and complexity of hydrological phenomena and natural catchments. More and more concern has been given to the scaling issues to gain a large-scale (or small-scale) hydrological characteristic from a certain known catchments, but hasn't been solved successfully. The first part of this paper introduced some concepts about hydrological scale, scale issue and scaling. The key problem is the spatial heterogeneity of catchments and the temporal and spatial variability of hydrological fluxes. Three approaches to scale were put forward in the third part, which were distributed modeling, fractal theory and statistical self similarity analyses. Existing problems and future research directions were proposed in the last part.

Implantable cardiac arrhythmia devices--part I: pacemakers.

PubMed

Kusumoto, Fred M; Goldschlager, Nora

2006-05-01

Implantable cardiac devices have become firmly entrenched as important therapeutic tools for a variety of cardiac conditions. The first part of this two-part review will discuss the contemporary use and follow-up of pacemakers, while the second part will address the use of implantable cardioverter defibrillators and implantable loop recorders. Pacemakers are the only available treatment for symptomatic bradycardia not due to reversible causes. Large randomized studies have demonstrated a small but statistically significant reduction in atrial fibrillation associated with pacing modes that maintain atrioventricular synchrony. In contrast, pacing mode appears to have a less dramatic effect in patients with atrioventricular block. Cardiac resynchronization with specialized left ventricular leads has been shown to reduce symptoms and improve survival in patients with symptomatic heart failure, systolic dysfunction, and widened QRS complexes. For all patients, careful follow-up is necessary to ensure optimal therapeutic benefit of pacing systems.

Sahara 99555 and D'Orbigny: Possible Pristine Parent Magma of Quenched Angrites

NASA Technical Reports Server (NTRS)

Mikouchi, T.; McKay, G. A.; Jones, J. H.

2004-01-01

Angrites constitute a small, but important group of basaltic achondrites showing unusual mineralogy and old crystallization ages. The currently known angrites are divided into two subgroups. Angra dos Reis (ADOR) and LEW86010 show slow cooling histories ("slowly-cooled" angrites) and differ from the later found angrites (LEW87051, Asuka 881371, Sahara 99555, D Orbigny, NWA1670, NWA1298). This second group has textures that suggest rapid cooling histories ("quenched" angrites). The petrogenesis of angrites has been controversial, partly due to the small number of available samples. In this abstract, we suggest a possible parent melt composition for the quenched angrites and its relationship to the partial melts of carbonaceous chondrites.

Pre-Finishing of SiC for Optical Applications

NASA Technical Reports Server (NTRS)

Rozzi, Jay; Clavier, Odile; Gagne, John

2011-01-01

13 Manufacturing & Prototyping A method is based on two unique processing steps that are both based on deterministic machining processes using a single-point diamond turning (SPDT) machine. In the first step, a high-MRR (material removal rate) process is used to machine the part within several microns of the final geometry. In the second step, a low-MRR process is used to machine the part to near optical quality using a novel ductile regime machining (DRM) process. DRM is a deterministic machining process associated with conditions under high hydrostatic pressures and very small depths of cut. Under such conditions, using high negative-rake angle cutting tools, the high-pressure region near the tool corresponds to a plastic zone, where even a brittle material will behave in a ductile manner. In the high-MRR processing step, the objective is to remove material with a sufficiently high rate such that the process is economical, without inducing large-scale subsurface damage. A laser-assisted machining approach was evaluated whereby a CO2 laser was focused in advance of the cutting tool. While CVD (chemical vapor deposition) SiC was successfully machined with this approach, the cutting forces were substantially higher than cuts at room temperature under the same machining conditions. During the experiments, the expansion of the part and the tool due to the heating was carefully accounted for. The higher cutting forces are most likely due to a small reduction in the shear strength of the material compared with a larger increase in friction forces due to the thermal softening effect. The key advantage is that the hybrid machine approach has the potential to achieve optical quality without the need for a separate optical finishing step. Also, this method is scalable, so one can easily progress from machining 50-mm-diameter samples to the 250-mm-diameter mirror that NASA desires.

Induced electric currents in the Alaska oil pipeline measured by gradient, fluxgate, and SQUID magnetometers

NASA Technical Reports Server (NTRS)

Campbell, W. H.; Zimmerman, J. E.

1979-01-01

The field gradient method for observing the electric currents in the Alaska pipeline provided consistent values for both the fluxgate and SQUID method of observation. These currents were linearly related to the regularly measured electric and magnetic field changes. Determinations of pipeline current were consistent with values obtained by a direct connection, current shunt technique at a pipeline site about 9.6 km away. The gradient method has the distinct advantage of portability and buried- pipe capability. Field gradients due to the pipe magnetization, geological features, or ionospheric source currents do not seem to contribute a measurable error to such pipe current determination. The SQUID gradiometer is inherently sensitive enough to detect very small currents in a linear conductor at 10 meters, or conversely, to detect small currents of one amphere or more at relatively great distances. It is fairly straightforward to achieve imbalance less than one part in ten thousand, and with extreme care, one part in one million or better.

Simvastatin inhibits Staphylococcus aureus host cell invasion through modulation of isoprenoid intermediates

PubMed Central

Horn, Mary P.; Knecht, Sharmon M.; Rushing, Frances L.; Birdsong, Julie; Siddall, C. Parker; Johnson, Charron M.; Abraham, Terri N.; Brown, Amy; Volk, Catherine B.; Gammon, Kelly; Bishop, Derron L.; McKillip, John L.; McDowell, Susan A.

2015-01-01

Patients on a statin regimen are at a decreased risk of death due to bacterial sepsis. We have found that protection by simvastatin includes the inhibition of host cell invasion by Staphylococcus aureus, the most common etiologic agent of sepsis. Inhibition was due in part to depletion of isoprenoid intermediates within the cholesterol biosynthesis pathway and led to the cytosolic accumulation of the small-guanosine triphosphatases (GTPases) CDC42, Rac, and RhoB. Actin stress fiber disassembly required for host invasion was attenuated by simvastatin and by the inhibition of phosphoinositide 3-kinase (PI3K) activity. PI3K relies on coupling to prenylated proteins, such as this subset of small-GTPases, for access to membrane-bound phosphoinositide to mediate stress fiber disassembly. Therefore, we examined whether simvastatin restricts PI3K cellular localization. In response to simvastatin, the PI3K isoform p85, coupled to these small-GTPases, was sequestered within the cytosol. From these findings, we propose a mechanism whereby simvastatin restricts p85 localization, inhibiting actin dynamics required for bacterial endocytosis. This may provide the basis for protection at the level of the host in invasive infections by S. aureus. PMID:18388257

An Effective Method for Inversion of Elastic Impedance for Shallow Sediments and Its Application to Gas Hydrate-Bearing Sediments

USGS Publications Warehouse

Lee, Myung W.

2006-01-01

Elastic properties of gas hydrate-bearing sediments (GHBS) are important for identifying and quantifying gas hydrate as well as discriminating the effects of free gas on velocity from that due to overpressure. Elastic properties of GHBS sediments can be estimated from elastic inversion using the elastic impedance. The accuracy of elastic inversion can be increased by using the predicted S-wave velocity (Vs) in the parameter k, which is k = (Vs / Vp)2. However, when Vs is less than about 0.6 kilometer per second, the inversion is inaccurate, partly because of the difficulty in accurately predicting low S-wave velocities and partly because of the large error associated with small k values. A new formula that leads to estimates of only the high-frequency part of velocity is proposed by decomposing Vs into low- and high-frequency parts. This new inversion formula is applied to a variety of well logs, and the results demonstrate its effectiveness for all ranges of Vs as long as the deviation of Vs from the low-frequency part of Vs is small. For GHBS, the deviation of Vs from the low-frequency part of Vs can be large for moderate to high gas hydrate saturations. Therefore, the new formula is not effective for elastic inversion for GHBS unless the gas hydrate effect is incorporated into the low-frequency part of Vs. For inversion of GHBS with Vs greater than about 0.6 kilometer per second, the original formulation is preferable.

The "Pavia model" of experimental small bowel transplantation in pigs: technical variations for ischemia reperfusion injury studies.

PubMed

Alessiani, M; Cobianchi, L; Viganò, J; Dominioni, T; Bottazzi, A; Zonta, S; Dionigi, P

2014-01-01

Ischemia reperfusion injury (IRI) is a major field of study in small bowel transplantation because of its implications regarding intestinal immunity. In this study, we have introduced some variations to the described models of IRI in pigs to make possible a complete isolation of the small bowel for IRI studies. In swine, two anatomical barriers make impossible a complete isolation of the small bowel at the origin of superior mesenteric artery (SMA) and vein (SMV): the main colic vessels, which originate distally to form SMA and SMV, and the blood supply of the distal portion of the duodenum and the cephalic part of the pancreas. In a group of Large White pigs (n = 5), we have performed a complete isolation of the small bowel, including sub-total colectomy and pancreaticoduodenectomy. Both SMA and SMV were isolated at the origin from the aorta and at the junction of the splenic vein, respectively. Intestinal continuity was restored with duodenojejunal anastomosis and with ileotransverse colon anastomosis. One pig died on postoperative day 5 from intestinal occlusion due to adhesions. The remaining four pigs were killed on postoperative day 7 after an uneventful postoperative course. No complications were found at autopsy. In swine, resection of part of the pancreas and duodenum and removal of the large bowel does not affect short-term survival, allowing a full isolation of the entire small bowel mimicking the transplantation procedure. Thus, this model appears to be attractive for IRI studies in the field of intestinal transplantation. Copyright © 2014 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schecker, Jay A

After a prolonged absence, the word 'nuclear' has returned to the lexicon of sustainable domestic energy resources. Due in no small part to its demonstrated reliability, nuclear power is poised to playa greater role in the nation's energy future, producing clean, carbon-neutral electricity and contributing even more to our energy security. To nuclear scientists, the resurgence presents an opportunity to inject new technologies into the industry to maximize the benefits that nuclear energy can provide. 'By developing new options for waste management and exploiting new materials to make key technological advances, we can significantly impact the use of nuclear energymore » in our future energy mix,' says Chris Stanek, a materials scientist at Los Alamos National Laboratory. Stanek approaches the big technology challenges by thinking way small, all the way down to the atoms. He and his colleagues are using cutting edge atomic-scale simulations to address a difficult aspect of nuclear waste -- predicting its behavior far into the future. Their research is part of a broader, coordinated effort on the part of the Laboratory to use its considerable experimental, theoretical, and computational capabilities to explore advanced materials central to not only waste issues, but to nuclear fuels as well.« less

NREL to Work with 14 Additional Small Businesses as Part of the DOE Small

Science.gov Websites

Business Vouchers Program | NREL | News | NREL to Work with 14 Additional Small Businesses as Part of the DOE Small Business Vouchers Program News Release: NREL to Work with 14 Additional Small Businesses as Part of the DOE Small Business Vouchers Program May 2, 2017 The U.S. Department of Energy's

X-ray photoelectron spectroscopy on 1-peso and 2-pesos of the Argentine Republic

NASA Astrophysics Data System (ADS)

Gard, Faramarz S.; Duffo, Gustavo; Bergamasco, Pablo; Forlerer, Elena

2018-04-01

Relative concentrations of nickel and copper at the surface of the ring and centre parts of 1-peso and 2-pesos Argentine coins have been studied by means of X-ray photoemission spectroscopy (XPS). It has been observed Ni-enrichment at the surface of the ring (silvery) part of a 1-peso, minted in 1994, whereas the XPS data reveals lack of nickel at the surface of the centre (silvery) part of a 2-pesos, minted in 2016. This discrepancy is explained by analyzing the XPS peaks of oxygen and carbon, and is suggested to be related to the contamination layer on the surface of the coins. The XPS analysis of the golden parts of the coins, namely the centre part of the 1-peso and the ring part of the 2-pesos coins were inconclusive, due to the small amount of the Ni (nominally %2) used in those parts. The possible oxidations states of the metals at the surface of the untreated and treated coins with the artificial human sweat were also identified.

Photomask repeater strategy for high-quality and low-cost reticle fabrication

NASA Astrophysics Data System (ADS)

Kyoh, Suigen; Inoue, Soichi; Ikenaga, Osamu; Higaki, Tomotaka; Shigemitsu, Fumiaki; Mori, Ichiro; Kokubo, Haruo; Hayashi, Naoya; Irie, Nobuyuki; Ishii, Yuki; Umatate, Toshikazu

2003-08-01

The severe mask specification makes mask cost increase drastically. Especially, the increase in the mask cost deals ASIC businesses a fatal blow due to its small chip volume per product. Pattern writing cost has always occupied the main part of the prime mask cost and the emphasis of this is still increasing. This paper reports on a Photomask Repeater strategy to be a solution for reducing mask cost in pattern writing, comparing with conventional EB system.

Mueller matrix characterization of flexible plastic substrates

NASA Astrophysics Data System (ADS)

Hong, Nina; Synowicki, Ron A.; Hilfiker, James N.

2017-11-01

This work reports on Mueller matrix spectroscopic ellipsometry characterization of various flexible plastic substrates that are optically anisotropic with varying degrees of birefringence. The samples are divided into three groups according to the suggested characterization strategy: low birefringence, high birefringence, and twisted birefringence. The first group includes poly(methyl methacrylate) and cyclic olefin copolymer substrates. These are modeled with biaxial anisotropy for the real part of the refractive index while the imaginary part is approximated as isotropic due to small light absorption. The second group includes polyethylene terephthalate and polyethylene naphthalate substrates, which are modeled with biaxial anisotropy for both real and imaginary refractive indices. Lastly, a polyimide substrate is described as two birefringent layers with twisted in-plane orientation.

Nuclear quantum effects in water exchange around lithium and fluoride ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkins, David M.; Manolopoulos, David E.; Dang, Liem X.

2015-02-14

We employ classical and ring polymer molecular dynamics simulations to study the effect of nuclear quantum fluctuations on the structure and the water exchange dynamics of aqueous solutions of lithium and fluoride ions. While we obtain reasonably good agreement with experimental data for solutions of lithium by augmenting the Coulombic interactions between the ion and the water molecules with a standard Lennard-Jones ion-oxygen potential, the same is not true for solutions of fluoride, for which we find that a potential with a softer repulsive wall gives much better agreement. A small degree of destabilization of the first hydration shell ismore » found in quantum simulations of both ions when compared with classical simulations, with the shell becoming less sharply defined and the mean residence time of the water molecules in the shell decreasing. In line with these modest differences, we find that the mechanisms of the exchange processes are unaffected by quantization, so a classical description of these reactions gives qualitatively correct and quantitatively reasonable results. We also find that the quantum effects in solutions of lithium are larger than in solutions of fluoride. This is partly due to the stronger interaction of lithium with water molecules, partly due to the lighter mass of lithium and partly due to competing quantum effects in the hydration of fluoride, which are absent in the hydration of lithium.« less

Postchallenge hyperglycemia in subjects with low body weight: implication for small glucose volume.

PubMed

Sakuma, Takahiro; Yamashita, Koh; Miyakoshi, Takahiro; Shimodaira, Masanori; Yokota, Naokazu; Sato, Yuka; Hirabayashi, Kazuko; Koike, Hideo; Yamauchi, Keishi; Shimbo, Takuro; Aizawa, Toru

2017-12-01

A hypothesis that postchallenge hyperglycemia in subjects with low body weight (BW) may be due, in part, to small glucose volume (G V ) was tested. We studied 11,411 nondiabetic subjects with a mean BW of 63.3 kg; 5,282 of them were followed for a mean of 5.3 yr. In another group of 1,537 nondiabetic subjects, insulin sensitivity, secretion, and a product of the two (index of whole body insulin action) were determined. Corrected 2 h-plasma glucose (2hPG corr ) during a 75-g oral glucose tolerance test in subjects with BW ≤ 59 kg was calculated as 2hPG corr = δPG 2h · ECW/[16.1 (males) or 15.3 (females)] + fasting PG (FPG), where δPG 2h is plasma glucose increment in 2 h; ECW is extracellular water (surrogate of G V ); FPG is fasting plasma glucose; and 16.1 and 15.3 are ECW of men and women, respectively, with BW = 59 kg. Multivariate analyses for BW with adjustment for age, sex, and percent body fat were undertaken. BW was, across its entire range, positively correlated with FPG ( P < 0.01). Whereas BW was correlated with 2hPG and δPG in a skewed J-shape, with inflections at around 60 kg ( P for nonlinearity < 0.01 for each). Nonetheless, in those with BW ≤ 59 kg, insulin sensitivity, secretion, and action were unattenuated, and incident diabetes was less compared with heavier counterparts. BW was linearly correlated with 2hPG corr , i.e., the J-shape correlation was mitigated by the correction. In conclusion, postchallenge hyperglycemia in low BW subjects is in part due to small G V rather than impaired glucose metabolism. Copyright © 2017 the American Physiological Society.

Electronic management: Exploring its impact on small business

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bewayo, E.D.

Macworld magazine recently reported that more than one in five companies eavesdrops electronically on its employees. Electronic eavesdropping is one name given to electronic management Besides being known as electronic eaves-dropping, electronic management also goes by electronic monitoring, electronic supervision, electronic snooping, electronic sweat-shopping, electronic surveillance, electronic Big Brothering, and computerized performance monitoring. Some of these labels connote negative things about electronic management, and relate to applications of electronic management to extreme and unreasonable levels. In the rest of this paper the terms electronic management and electronic monitoring will be used interchangeably. In this paper we discuss the impacts ofmore » electronic management, positive and negative, on workplaces, with emphasis on small businesses. This small business emphasis is partly because of the author`s research interests, and partly because most of what has been written on electronic management has been based on large business contexts. This large business bias has been partly due to the fact that the early inroads of electronic management were almost exclusively limited to large companies--beginning with telephone service observation in the late 1800s. However, now with the growing affordability and, consequently, the proliferation of electronic technology (especially the computer), electronic management is no longer the monopoly of large corporations. Electronic management has now reached restaurants, drug stores, liquor stores, convenience stores, and trucking companies. And in some industries, e.g., banking, every business, regardless of size, uses electronic monitoring.« less

13 CFR Appendix A to Part 112 - Appendix A to Part 112

Code of Federal Regulations, 2010 CFR

2010-01-01

... enterprise Executive Order 12138. Small business innovation and research Small Business Act, sec. 9... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Appendix A to Part 112 A Appendix A to Part 112 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NONDISCRIMINATION IN...

13 CFR Appendix A to Part 1171 - Appendix A to Part 1171

Code of Federal Regulations, 2011 CFR

2011-01-01

.... International Trade Program Small Business Act, section 22. Technical and Management Assistance Small Business... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Appendix A to Part 1171 A Appendix A to Part 1171 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NONDISCRIMINATION IN...

Review of problems in the small-scale farm production of ethanol

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, H.M.

1983-07-01

This report reviews the current status of small, farmer-operated ethanol production facilities. The characteristics and operating problems associated with present plants are reviewed with respect to technical, economic, and institutional issues. Information was obtained from recent publications and numerous telephone calls to state and federal officials and the producers themselves. It is concluded that, in most parts of the country, small-scale alcohol production has been reduced to relatively few farm plants, due primarily to several unfavorable economic factors. While both large and small facilities have been squeezed by rising feedstock costs and lower alcohol selling prices, the farmer-producer is burdenedmore » by additional constraints because of the small scale of his operations. It is not usually profitable for him to recover all the valuable by-products from the feedstock, such as gluten, corn oil, and carbon dioxide from corn conversion. He may not be able to use or market the wet alcohol and stillage he produces. Other difficulties often include high fuel costs, lack of financial and technical assistance, and excessive labor requirements.« less

Cerebral Small Vessel Disease and Chronic Kidney Disease

PubMed Central

2015-01-01

Chronic kidney disease, defined by a decreased glomerular filtration rate or albuminuria, is recognized as a major global health burden, mainly because it is an established risk factor for cardiovascular and cerebrovascular diseases. The magnitude of the effect of chronic kidney disease on incident stroke seems to be higher in persons of Asian ethnicity. Since the kidney and brain share unique susceptibilities to vascular injury due to similar anatomical and functional features of small artery diseases, kidney impairment can be predictive of the presence and severity of cerebral small vessel diseases. Chronic kidney disease has been reported to be associated with silent brain infarcts, cerebral white matter lesions, and cerebral microbleeds, independently of vascular risk factors. In addition, chronic kidney disease affects cognitive function, partly via the high prevalence of cerebral small vessel diseases. Retinal artery disease also has an independent relationship with chronic kidney disease and cognitive impairment. Stroke experts are no longer allowed to be ignorant of chronic kidney disease. Close liaison between neurologists and nephrologists can improve the management of cerebral small vessel diseases in kidney patients. PMID:25692105

16 CFR 1117.4 - Time for filing a report.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REPORTING OF CHOKING INCIDENTS INVOLVING MARBLES, SMALL BALLS, LATEX BALLOONS AND OTHER SMALL PARTS § 1117.4... marble, small ball, or latex balloon or on a marble, small ball, latex balloon, or other small part...

Combining Accuracy and Efficiency: An Incremental Focal-Point Method Based on Pair Natural Orbitals.

PubMed

Fiedler, Benjamin; Schmitz, Gunnar; Hättig, Christof; Friedrich, Joachim

2017-12-12

In this work, we present a new pair natural orbitals (PNO)-based incremental scheme to calculate CCSD(T) and CCSD(T0) reaction, interaction, and binding energies. We perform an extensive analysis, which shows small incremental errors similar to previous non-PNO calculations. Furthermore, slight PNO errors are obtained by using T PNO = T TNO with appropriate values of 10 -7 to 10 -8 for reactions and 10 -8 for interaction or binding energies. The combination with the efficient MP2 focal-point approach yields chemical accuracy relative to the complete basis-set (CBS) limit. In this method, small basis sets (cc-pVDZ, def2-TZVP) for the CCSD(T) part are sufficient in case of reactions or interactions, while some larger ones (e.g., (aug)-cc-pVTZ) are necessary for molecular clusters. For these larger basis sets, we show the very high efficiency of our scheme. We obtain not only tremendous decreases of the wall times (i.e., factors >10 2 ) due to the parallelization of the increment calculations as well as of the total times due to the application of PNOs (i.e., compared to the normal incremental scheme) but also smaller total times with respect to the standard PNO method. That way, our new method features a perfect applicability by combining an excellent accuracy with a very high efficiency as well as the accessibility to larger systems due to the separation of the full computation into several small increments.

13 CFR Appendix A to Part 112 - Appendix A to Part 112

Code of Federal Regulations, 2011 CFR

2011-01-01

... development centers Small Business Act, sec. 21 and Pub. L. 96-302. International Trade Program Small Business... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Appendix A to Part 112 A Appendix A to Part 112 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NONDISCRIMINATION IN...

Spectrum of perforation peritonitis in Pakistan: 300 cases Eastern experience.

PubMed

Afridi, Shahida Parveen; Malik, Faiza; Ur-Rahman, Shafiq; Shamim, Shahid; Samo, Khursheed A

2008-11-08

Perforation peritonitis is the most common surgical emergency encountered by the surgeons all over the world as well in Pakistan. The spectrum of etiology of perforation peritonitis in tropical countries continues to differ from its western counter part. This study was conducted at Dow University of health sciences and Civil Hospital Karachi (DUHS & CHK) Pakistan, designed to highlight the spectrum of perforation peritonitis in the East and to improve its outcome. A prospective study includes three hundred consecutive patients of perforation peritonitis studied in terms of clinical presentations, Causes, site of perforation, surgical treatment, post operative complications and mortality, at (DUHS&CHK) Pakistan, from 1st September 2005 - 1st March 2008, over a period of two and half years. All patients were resuscitated underwent emergency exploratory laparotomy. On laparotomy cause of perforation peritonitis was found and controlled. The most common cause of perforation peritonitis noticed in our series was acid peptic disease 45%, perforated duodenal ulcer (43.6%) and gastric ulcer 1.3%. followed by small bowel tuberculosis (21%) and typhoid (17%). large bowel perforation due to tuberculosis 5%, malignancy 2.6% and volvulus 0.3%. Perforation due to acute appendicitis (5%). Highest number of perforations has seen in the duodenum 43.6%, ileum37.6%, and colon 8%, appendix 5%, jejunum 3.3%, and stomach 2.3%. Overall mortality was (10.6%). The spectrum of perforation peritonitis in Pakistan continuously differs from western country. Highest number of perforations noticed in the upper part of the gastrointestinal tract as compared to the western countries where the perforations seen mostly in the distal part. Most common cause of perforation peritonitis is perforated duodenal ulcer, followed by small bowel tuberculosis and typhoid perforation. Majority of the large bowel perforations are also tubercular. Malignant perforations are least common in our setup.

Vestibular-Evoked Myogenic Potentials in Bilateral Vestibulopathy

PubMed Central

Rosengren, Sally M.; Welgampola, Miriam S.; Taylor, Rachael L.

2018-01-01

Bilateral vestibulopathy (BVP) is a chronic condition in which patients have a reduction or absence of vestibular function in both ears. BVP is characterized by bilateral reduction of horizontal canal responses; however, there is increasing evidence that otolith function can also be affected. Cervical and ocular vestibular-evoked myogenic potentials (cVEMPs/oVEMPs) are relatively new tests of otolith function that can be used to test the saccule and utricle of both ears independently. Studies to date show that cVEMPs and oVEMPs are often small or absent in BVP but are in the normal range in a significant proportion of patients. The variability in otolith function is partly due to the heterogeneous nature of BVP but is also due to false negative and positive responses that occur because of the large range of normal VEMP amplitudes. Due to their variability, VEMPs are not part of the diagnosis of BVP; however, they are helpful complementary tests that can provide information about the extent of disease within the labyrinth. This article is a review of the use of VEMPs in BVP, summarizing the available data on VEMP abnormalities in patients and discussing the limitations of VEMPs in diagnosing bilateral loss of otolith function. PMID:29719527

Modified interferometric imaging condition for reverse-time migration

NASA Astrophysics Data System (ADS)

Guo, Xue-Bao; Liu, Hong; Shi, Ying

2018-01-01

For reverse-time migration, high-resolution imaging mainly depends on the accuracy of the velocity model and the imaging condition. In practice, however, the small-scale components of the velocity model cannot be estimated by tomographical methods; therefore, the wavefields are not accurately reconstructed from the background velocity, and the imaging process will generate artefacts. Some of the noise is due to cross-correlation of unrelated seismic events. Interferometric imaging condition suppresses imaging noise very effectively, especially the unknown random disturbance of the small-scale part. The conventional interferometric imaging condition is extended in this study to obtain a new imaging condition based on the pseudo-Wigner distribution function (WDF). Numerical examples show that the modified interferometric imaging condition improves imaging precision.

The Electrocardiogram and Ischemic Heart Disease in Aircraft Pilots

PubMed Central

Manning, G. W.

1965-01-01

A review of the Royal Canadian Air Force electrocardiographic (ECG) program for selection of aircrew and detection of coronary disease in trained aircrew is presented. Twenty reported cases of death due to coronary disease in pilots while at the controls of an aircraft are reviewed. The use of routine electrocardiography in the selection of aircrew has proved to be of considerable value, particularly in view of the high cost of training. The ECG continues to be our most sensitive means of detecting asymptomatic coronary disease in aircrew personnel. It is apparent that from both the military and commercial standpoint the incidence of aircraft accidents due to coronary disease is extremely small. This is due in large part to the careful medical supervision of flying personnel including the routine use of electrocardiography in the assessment of flying fitness of aircrew. PMID:14323657

Minor contribution of small thaw ponds to the pools of carbon and methane in the inland waters of the permafrost-affected part of the Western Siberian Lowland

NASA Astrophysics Data System (ADS)

Polishchuk, Y. M.; Bogdanov, A. N.; Muratov, I. N.; Polishchuk, V. Y.; Lim, A.; Manasypov, R. M.; Shirokova, L. S.; Pokrovsky, O. S.

2018-04-01

Despite the potential importance of small (< 1000 m2) thaw ponds and thermokarst lakes in greenhouse gas (GHG) emissions from inland waters of high latitude and boreal regions, these features have not been fully inventoried and the volume of GHG and carbon in thermokarst lakes remains poorly constrained. This is especially true for the vast Western Siberia Lowland (WSL) which is subject to strong thermokarst activity. We assessed the number of thermokarst lakes and their size distribution for the permafrost-affected WSL territory based on a combination of medium-resolution Landsat-8 images and high-resolution Kanopus-V scenes on 78 test sites across the WSL in a wide range of lake sizes (from 20 to 2 × 108 m2). The results were in fair agreement with other published data for world lakes including those in circum-polar regions. Based on available measurements of CH4, CO2, and dissolved organic carbon (DOC) in thermokarst lakes and thaw ponds of the permafrost-affected part of the WSL, we found an inverse relationship between lake size and concentration, with concentrations of GHGs and DOC being highest in small thaw ponds. However, since these small ponds represent only a tiny fraction of the landscape (i.e. ~1.5% of the total lake area), their contribution to the total pool of GHG and DOC in inland lentic water of the permafrost-affected part of the WSL is less than 2%. As such, despite high concentrations of DOC and GHG in small ponds, their role in overall C storage can be negated. Ongoing lake drainage due to climate warming and permafrost thaw in the WSL may lead to a decrease in GHG emission potential from inland waters and DOC release from lakes to rivers.

Development of a Through Tubing (Microhole) Artificial Lift System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steve Bodden

2006-09-30

The goal of this project was to develop a small diameter pump system capable of being deployed through existing production tubing strings in oil/gas wells. The pump system would then pump water up an inner tubing string (likely coil tubing) and allow gas to flow in the annulus between the coil tubing and production tubing. Accomplishing this would allow wells that are currently loaded up (unable to flow at high enough rates to lift the fluid out of the wellbore) to continue to produce additional gas/oil reserves. The project was unable to complete a working test system due to unforeseen complexities in coupling the system components together in part due to the small diameter. Although several of the individual components were sourced and secured, coupling them together and getting electricity to the motor proved technically more difficult than expected. Thus, the project is no longer active due primarily to the complications realized in coupling the components and the difficulties in getting electricity to the submersible motor in a slimhole system. The other problem in finishing this project was the lack of financial resources. When the grant was first applied for it was expected that it would be awarded in early 2004. Since the grant was not actually awarded until the end of August 2004, GPS had basically run out ofmore » $$ and the principle developer (Steve Bodden) had to find a full time job which began in late July 2004. When the grant was finally awarded in late August, it was still hoped that the project could proceed as a part time development but with less financial exposure to the partners in GPS. This became very problematic as it still had many technical obstacles to overcome to get it to the stage of prototype testing.« less

Investigation of man's immune system (M112), part B

NASA Technical Reports Server (NTRS)

Ritzmann, S. E.; Levin, W. C.

1973-01-01

Fifty-six days of residence in a Skylab-type environment produce essentially no change in the reactivity of the human immune system, as typified by the rate of RNA or DNA synthesis in small lymphocytes. The one point of divergence between the Skylab simulation crew and previous Apollo crews, a marked depression in synthesis rates on the fourteenth day after the chamber study, may be due to some technical difficulty in the experiment. Lymphocyte morphology changes paralleled functional changes.

Design and characterization of very high frequency pulse tube prototypes

NASA Astrophysics Data System (ADS)

Lopes, Diogo; Duval, Jean-Marc; Charles, Ivan; Butterworth, James; Trollier, Thierry; Tanchon, Julien; Ravex, Alain; Daniel, Christophe

2012-06-01

Weight and size are important features of a cryocooler when it comes to space applications. Given their reliability and low level of exported vibrations (due to the absence of moving cold parts), pulse tubes are good candidates for spatial purposes and their miniaturization has been the focus of many studies. We report on the design and performance of a small-scale very high frequency pulse tube prototype, modeled after two previous prototypes which were optimized with a numerical code.

EPOXI at Comet Hartley 2

NASA Technical Reports Server (NTRS)

A'Hearn, Michael F.; Belton, Michael J. S.; Delamere, W. Alan; Feaga, Lori M.; Hampton, Donald; Kissel, Jochen; Klaasen, Kenneth P.; McFadden, Jessica M.; Meech, Karen J.; Melosh, H. Jay;

2014 Summer Series - Jon Jenkins - Chasing Shadow Worlds: Exoplanets from Kepler and Beyond

NASA Image and Video Library

2014-08-14

Twenty years ago, there were no planets known outside our own solar system. Since then, the discoveries of about 1500 planets orbiting other stars have radically altered our views of planets and planetary systems. This revolution in knowledge is due in no small part to the Kepler Mission, which has discovered over 950 of these planets and over 3000 planet candidates. This talk will review the greatest hits of Kepler and peek into the future of exoplanets.

Circulation of a type 1 recombinant vaccine-derived poliovirus strain in a limited area in Romania.

PubMed

Combiescu, M; Guillot, S; Persu, A; Baicus, A; Pitigoi, D; Balanant, J; Oprisan, G; Crainic, R; Delpeyroux, F; Aubert-Combiescu, A

2007-01-01

After intensive immunisation campaigns with the oral polio vaccine (OPV) as part of the Global Polio Eradication Initiative, poliomyelitis due to wild viruses has disappeared from most parts of the world, including Europe. Here, we report the characterization of a serotype 1 vaccine-derived poliovirus (VDPV) isolated from one acute flaccid paralysis (AFP) case with tetraplegia and eight healthy contacts belonging to the same small socio-cultural group having a low vaccine coverage living in a small town in Romania. The genomes of the isolated strains appeared to be tripartite type 1/type 2/type 1 vaccine intertypic recombinant genomes derived from a common ancestor strain. The presence of 1.2% nucleotide substitutions in the VP1 capsid protein coding region of most of the strains indicated a circulation time of about 14 months. These VDPVs were thermoresistant and, in transgenic mice expressing the human poliovirus receptor, appeared to have lost the attenuated phenotype. These results suggest that small populations with low vaccine coverage living in globally well-vaccinated countries can be the origin of VDPV emergence and circulation. These results reaffirm the importance of active surveillance for acute flaccid paralysis and poliovirus in both polio-free and polio-endemic countries.

Manufacturing techniques for titanium aluminide based alloys and metal matrix composites

NASA Astrophysics Data System (ADS)

Kothari, Kunal B.

Dual phase titanium aluminides composed vastly of gamma phase (TiAl) with moderate amount of alpha2 phase (Ti3Al) have been considered for several high temperature aerospace and automobile applications. High specific strength coupled with good high temperature performance in the areas of creep and oxidation resistance makes titanium aluminides "materials of choice" for next generation propulsion systems. Titanium alumnides are primarily being considered as potential replacements for Ni-based superalloys in gas turbine engine components with aim of developing more efficient and leaner engines exhibiting high thrust-to-weight ratio. Thermo-mechanical treatments have shown to enhance the mechanical performance of titanium aluminides. Additionally, small additions of interstitial elements have shown further and significant improvement in the mechanical performance of titanium alumnide alloys. However, titanium aluminides lack considerably in room temperature ductility and as a result manufacturing processes of these aluminides have greatly suffered. Traditional ingot metallurgy and investment casting based methods to produce titanium aluminide parts in addition to being expensive, have also been unsuccessful in producing titanium aluminides with the desired mechanical properties. Hence, the manufacturing costs associated with these methods have completely outweighed the benefits offered by titanium aluminides. Over the last two decades, several powder metallurgy based manufacturing techniques have been studied to produce titanium aluminide parts. These techniques have been successful in producing titanium aluminide parts with a homogeneous and refined microstructure. These powder metallurgy techniques also hold the potential of significant cost reduction depending on the wide market acceptance of titanium aluminides. In the present study, a powder metallurgy based rapid consolidation technique has been used to produce near-net shape parts of titanium aluminides. Micron-sized titanium aluminide powders were rapidly consolidated to form near-net shape titanium aluminide parts in form of small discs and tiles. The rapidly consolidated titanium aluminide parts were found to be fully dense. The microstructure morphology was found to vary with consolidation conditions. The mechanical properties were found to be significantly dependent on microstructure morphology and grain size. Due to rapid consolidation, grain growth during consolidation was limited, which in turn led to enhanced mechanical properties. The high temperature mechanical properties for the consolidated titanium aluminide samples were characterized and were found to retain good mechanical performance up to 700°C. Micron-sized titanium aluminide powders with slightly less Aluminum and small Nb, and Cr additions were rapidly consolidated into near-net shape parts. The consolidated parts were found to exhibit enhanced mechanical performance in terms of ductility and yield strength. The negative effect of Oxygen on the flexural strength at high temperatures was found to be reduced with the addition of Nb. In an effort to further reduce the grain size of the consolidated titanium aluminide samples, the as-received titanium aluminide powders were milled in an attrition mill. The average powder particle size of the powders was reduced by 60% after milling. The milled powders were then rapidly consolidated. The grain size of the consolidated parts was found to be in the sub-micrometer range. The mechanical properties were found to be significantly enhanced due to reduction of grain size in the sub-micrometer range. In order to develop a metal matrix composite based on titanium aluminide matrix reinforced with titanium boride, an experiment to study the effect of rapid consolidation on titanium diboride powders was conducted. Micron-sized titanium diboride powders were consolidated and were found to be 93% dense and exhibited minimal grain growth. The low density of the consolidated part was attributed to low consolidation temperature. Titanium aluminide and titanium diboride powders were blended together in an attrition mill and rapidly consolidated. A metal matrix composite with titanium aluminide matrix reinforced with titanium monoboride plates was formed. The titanium diboride in the powder form was found to be transformed to titanium monoboroide plates during consolidation due to the thermodynamic equilibrium between titanium and titanium monoboride. The metal matrix composite was found to be 90% dense. The low density was due to particle size mismatch between the matrix and reinforcement powders and low consolidation temperature. An increase in the volume of titanium monoboride plates in the metal matrix composite was accompanied by an increase in the elastic modulus of the metal matrix composite.

Flight service evaluation of Kevlar-49/epoxy composite panels in wide-bodied commercial transport aircraft

NASA Technical Reports Server (NTRS)

Stone, R. H.

1975-01-01

Kevlar-49 fairing panels were inspected and found to be performing satisfactorily after two years flight service on an Eastern and an Air Canada L-1011. Six panels are on each aircraft including sandwich and solid laminate wing-body panels, and 300 F service aft engine fairings. Some of the panels were removed from the aircraft to permit inspection of inner surfaces and fastener hole conditions. Minor defects such as surface cracks due to impact damage, small delaminated areas, elongation and fraying of fastener holes, were noted. None of these defects were considered serious enough to warrant corrective action in the opinion of airline personnel. The defects are typical for the most part of defects noted on similar fiberglass parts.

Intestinal microbiota, probiotics and mental health: from Metchnikoff to modern advances: Part II - contemporary contextual research.

PubMed

Bested, Alison C; Logan, Alan C; Selhub, Eva M

2013-03-14

In recent years there has been a renewed interest concerning the ways in which the gastrointestinal tract - its functional integrity and microbial residents - might influence human mood (e.g. depression) and behavioral disorders. Once a hotbed of scientific interest in the early 20th century, this area lay dormant for decades, in part due to its association with the controversial term 'autointoxication'. Here we review contemporary findings related to intestinal permeability, small intestinal bacterial overgrowth, lipopolysaccharide endotoxin (LPS) exposure, D-lactic acid, propionic acid, and discuss their relevance to microbiota and mental health. In addition, we include the context of modern dietary habits as they relate to depression, anxiety and their potential interaction with intestinal microbiota.

Energy-momentum conserving higher-order time integration of nonlinear dynamics of finite elastic fiber-reinforced continua

NASA Astrophysics Data System (ADS)

Erler, Norbert; Groß, Michael

2015-05-01

Since many years the relevance of fibre-reinforced polymers is steadily increasing in fields of engineering, especially in aircraft and automotive industry. Due to the high strength in fibre direction, but the possibility of lightweight construction, these composites replace more and more traditional materials as metals. Fibre-reinforced polymers are often manufactured from glass or carbon fibres as attachment parts or from steel or nylon cord as force transmission parts. Attachment parts are mostly subjected to small strains, but force transmission parts usually suffer large deformations in at least one direction. Here, a geometrically nonlinear formulation is necessary. Typical examples are helicopter rotor blades, where the fibres have the function to stabilize the structure in order to counteract large centrifugal forces. For long-run analyses of rotor blade deformations, we have to apply numerically stable time integrators for anisotropic materials. This paper presents higher-order accurate and numerically stable time stepping schemes for nonlinear elastic fibre-reinforced continua with anisotropic stress behaviour.

Uranium and thorium in the Kupferschiefer formation, Lower Zechstein, Poland

NASA Astrophysics Data System (ADS)

Piestrzyński, A.

1990-05-01

The Kupferschiefer in Poland has an increased U content. The facies high in organic matter are significantly enriched in U. The maximum values of U are mostly in the lower part of the Kupferschiefer sequence. The mean (x) U content in the Kupferschiefer from the Lubin-Sieroszowice district is 61.5 ppm and from the rest of the Polish Zechstein basin is about 26 ppm. Thorium occurs only in small quantities (x) = 1.5 and 5 ppm respectively). The high variance of U and Th in the Kupferschiefer is due to multistage diagenetic processes. The main U carrier is thucholite. The investigated thucholite showed a Th-content below 0.36 ppm. Thucholite with uraninite exolutions showed small (up to 1.0 wt.%) admixtures of U and thucholite without microscopically visible exsolutions (up to 37.85 wt.% U). The phosphates showed significant amounts of U (up to 0.24 wt.). The U content in the Kupferschiefer is significantly lower than in black shales from other part of the world. Uranium in the Lubin district is not economic.

Solar Nebula Magnetohydrodynamic Dynamos: Kinematic Theory, Dynamical Constraints, and Magnetic Transport of Angular Momentum

NASA Technical Reports Server (NTRS)

Stepinski, Tomasz F.; Reyes-Ruiz, Mauricio; Vanhala, Harri A. T.

1993-01-01

A hydromagnetic dynamo provides the best mechanism for contemporaneously producing magnetic fields in a turbulent solar nebula. We investigate the solar nebula in the framework of a steady-state accretion disk model and establish the criteria for a viable nebular dynamo. We have found that typically a magnetic gap exists in the nebula, the region where the degree of ionization is too small for the magnetic field to couple to the gas. The location and width of this gap depend on the particular model; the supposition is that gaps cover different parts of the nebula at different evolutionary stages. We have found, from several dynamical constraints, that the generated magnetic field is likely to saturate at a strength equal to equipartition with the kinetic energy of turbulence. Maxwell stress arising from a large-scale magnetic field may significantly influence nebular structure, and Maxwell stress due to small-scale fields can actually dominate other stresses in the inner parts of the nebula. We also argue that the bulk of nebular gas, within the scale height from the midplane, is stable against Balbus-Hawley instability.

Diffusion of passive particles in active suspensions

NASA Astrophysics Data System (ADS)

Mussler, Matthias; Rafai, Salima; John, Thomas; Peyla, Philippe; Wagner, Christian

2013-11-01

We study how an active suspension consisting of a definite volume fraction of the microswimmer Chlamydomonas Reinhardtii modifies the Brownian movement of small to medium size microspheres. We present measurements and simulations of trajectories of microspheres with a diameter of 20 μm in suspensions of Chlamydomonas Reinhardtii, a so called ``puller,'' and show that the mean squared displacement of such trajectories consist of parabolic and a linear part. The linear part is due to the hydrodynamic noise of the microswimmers while the parabolic part is a consequence of directed motion events that occur randomly, when a microsphere is transported by a microswimmer on a timescale that is in higher order of magnitude than the Brownian like hydrodynamic interaction. In addition, we theoretically describe this effect with a dimensional analysis that takes the force dipole model used to describe ``puller'' like Chlamydomonas Reinhardtii into account.

Association analysis between spatiotemporal variation of vegetation greenness and precipitation/temperature in the Yangtze River Basin (China).

PubMed

Cui, Lifang; Wang, Lunche; Singh, Ramesh P; Lai, Zhongping; Jiang, Liangliang; Yao, Rui

2018-05-23

The variation in vegetation greenness provides good understanding of the sustainable management and monitoring of land surface ecosystems. The present paper discusses the spatial-temporal changes in vegetation and controlling factors in the Yangtze River Basin (YRB) using Global Inventory Modeling and Mapping Studies (GIMMS) Normalized Difference Vegetation Index (NDVI) for the period 2001-2013. Theil-Sen Median trend analysis, Pearson correlation coefficients, and residual analysis have been used, which shows decreasing trend of the annual mean NDVI over the whole YRB. Spatially, the regions with significant decreasing trends were mainly located in parts of central YRB, and pronounced increasing trends were observed in parts of the eastern and western YRB. The mean NDVI during spring and summer seasons increased, while it decreased during autumn and winter seasons. The seasonal mean NDVI shows spatial heterogeneity due to the vegetation types. The correlation analysis shows a positive relation between NDVI and temperature over most of the YRB, whereas NDVI and precipitation show a negative correlation. The residual analysis shows an increase in NDVI in parts of eastern and western YRB and the decrease in NDVI in the small part of Yangtze River Delta (YRD) and the mid-western YRB due to human activities. In general, climate factors were the principal drivers of NDVI variation in YRB in recent years.

13 CFR Appendix A to Part 1171 - Appendix A to Part 1171

Code of Federal Regulations, 2010 CFR

2010-01-01

... AMENDED Supervision and coordination. Pt. 117, App. A Appendix A to Part 1171 Type of Federal financial assistance Authority Business Loans Small Business Act, section 7(a). Debtor State Development companies (501... companies (502) and their small business concerns Small Business Investment Act, Title V. Debtor certified...

Influenceable and Avoidable Risk Factors for Systemic Air Embolism due to Percutaneous CT-Guided Lung Biopsy: Patient Positioning and Coaxial Biopsy Technique—Case Report, Systematic Literature Review, and a Technical Note

PubMed Central

2014-01-01

Following the first case of a systemic air embolism due to percutaneous CT-guided lung biopsy in our clinic we analysed the literature regarding this matter in view of influenceable or avoidable risk factors. A systematic review of literature reporting cases of systemic air embolism due to CT-guided lung biopsy was performed to find out whether prone positioning might be a risk factor regarding this issue. In addition, a technical note concerning coaxial biopsy practice is presented. Prone position seems to have relevance for the development and/or clinical manifestation of air embolism due to CT-guided lung biopsy and should be considered a risk factor, at least as far as lesions in the lower parts of the lung are concerned. Biopsies of small or cavitary lesions in coaxial technique should be performed using a hemostatic valve. PMID:25431666

Strategies for displacing oil

NASA Astrophysics Data System (ADS)

Rao, Vikram; Gupta, Raghubir

2015-03-01

Oil currently holds a monopoly on transportation fuels. Until recently biofuels were seen as the means to break this stranglehold. They will still have a part to play, but the lead role has been handed to natural gas, almost solely due to the increased availability of shale gas. The spread between oil and gas prices, unprecedented in its scale and duration, will cause a secular shift away from oil as a raw material. In the transport fuel sector, natural gas will gain traction first in the displacement of diesel fuel. Substantial innovation is occurring in the methods of producing liquid fuel from shale gas at the well site, in particular in the development of small scale distributed processes. In some cases, the financing of such small-scale plants may require new business models.

Customizing systemic therapy in patients with advanced non-small cell lung cancer

PubMed Central

Sadowska, A. M.; Nowé, V.; Janssens, A.; Boeykens, E.; De Backer, W. A.; Germonpré, P. R.

2011-01-01

Lung cancer is the leading cause of cancer deaths worldwide. Standard chemotherapy has been shown to improve quality of life and has a modest influence on overall survival. This modest improvement in survival is partly due to the choice of chemotherapy regimens that have been based on prognostic factors such as age, performance status and comorbidities of the patient. This underlines the importance of developing a more personalized therapy for patients with non-small cell lung cancer. Such an approach may reduce the variation in how individual patients respond to medications by tailoring therapies to their genetic profile. In this review we focus on several aspects of customized therapy, looking not only at patient characteristics but also to tumor histology and specific tumor biomarkers. PMID:21904581

Customizing systemic therapy in patients with advanced non-small cell lung cancer.

PubMed

Sadowska, A M; Nowé, V; Janssens, A; Boeykens, E; De Backer, W A; Germonpré, P R

2011-07-01

Lung cancer is the leading cause of cancer deaths worldwide. Standard chemotherapy has been shown to improve quality of life and has a modest influence on overall survival. This modest improvement in survival is partly due to the choice of chemotherapy regimens that have been based on prognostic factors such as age, performance status and comorbidities of the patient. This underlines the importance of developing a more personalized therapy for patients with non-small cell lung cancer. Such an approach may reduce the variation in how individual patients respond to medications by tailoring therapies to their genetic profile. In this review we focus on several aspects of customized therapy, looking not only at patient characteristics but also to tumor histology and specific tumor biomarkers.

Simultaneous identification of the low-field-induced tiny variation of complex refractive index for anisotropic and opaque magnetic-fluid thin film by a stable heterodyne Mach-Zehnder interferometer.

PubMed

Hong, Chin-Yih; Chieh, Jen-Jie; Yang, Shieh-Yueh; Yang, Hong-Chang; Horng, Herng-Er

2009-10-10

We use a heterodyne Mach-Zehnder interferometer to simultaneously and simply measure the complex refractive index by only normal incidence on the specimen, instead of using a complicated measurement procedure or instrument that only measures the real or imaginary part of the complex refractive index. To study the tiny variation of the complex refractive index, the small complex refractive-index variation of a rare-concentration magnetic-fluid thin film, due to a weak field of less than 200 Oe, was processed by this interferometer. We also present the wavelength trend of the complex refractive index of magnetic fluids to verify the appearance of the slight change in a small wavelength range.

How Honey Bee Colonies Survive in the Wild: Testing the Importance of Small Nests and Frequent Swarming

PubMed Central

Loftus, J. Carter; Smith, Michael L.; Seeley, Thomas D.

2016-01-01

The ectoparasitic mite, Varroa destructor, and the viruses that it transmits, kill the colonies of European honey bees (Apis mellifera) kept by beekeepers unless the bees are treated with miticides. Nevertheless, there exist populations of wild colonies of European honey bees that are persisting without being treated with miticides. We hypothesized that the persistence of these wild colonies is due in part to their habits of nesting in small cavities and swarming frequently. We tested this hypothesis by establishing two groups of colonies living either in small hives (42 L) without swarm-control treatments or in large hives (up to 168 L) with swarm-control treatments. We followed the colonies for two years and compared the two groups with respect to swarming frequency, Varroa infesttion rate, disease incidence, and colony survival. Colonies in small hives swarmed more often, had lower Varroa infestation rates, had less disease, and had higher survival compared to colonies in large hives. These results indicate that the smaller nest cavities and more frequent swarming of wild colonies contribute to their persistence without mite treatments. PMID:26968000

40 CFR Table 1 to Subpart Hhh of... - Emission Limits for Small Rural, Small, Medium, and Large HMIWI

Code of Federal Regulations, 2014 CFR

2014-07-01

..., Medium, and Large HMIWI 1 Table 1 to Subpart HHH of Part 62 Protection of Environment ENVIRONMENTAL... Part 62—Emission Limits for Small Rural, Small, Medium, and Large HMIWI For the air pollutant You must meet this emissions limit HMIWI size Small rural Small Medium Large With these units(7 percent oxygen...

40 CFR Table 1 to Subpart Hhh of... - Emissions Limits for Small Rural, Small, Medium and Large HMIWI

Code of Federal Regulations, 2013 CFR

2013-07-01

..., Medium and Large HMIWI 1 Table 1 to Subpart HHH of Part 62 Protection of Environment ENVIRONMENTAL... Part 62—Emissions Limits for Small Rural, Small, Medium and Large HMIWI For the air pollutant You must meet this emissions limit HMIWI size Small rural Small Medium Large With these units(7 percent oxygen...

Comparison of endoscopy and barium swallow with marshmallow in dysphagia.

PubMed

Somers, S; Stevenson, G W; Thompson, G

1986-06-01

Forty-four patients with dysphagia were examined both by endoscopy and by barium swallow with a marshmallow bolus. In these patients 36 stenoses were found: 34 by radiology and 30 by endoscopy. The radiologic criteria for stenosis included arrest of the marshmallow in a manner to support a column of barium and reproduction of the patient's symptoms at the time this occurred. Radiologic false negative findings were partly due to an inability by patients to swallow an adequate marshmallow bolus; endoscopic failures were associated with small endoscopes and mild stenoses.

Proceedings of Symposium on Climatic Parameters in Radiowave Propagation Prediction, Climpara 94 Held in Moscow, Russia on 13 May - 3 June 1994

DTIC Science & Technology

1994-01-01

data acquisition systems and run radio, but due to the short wave length the synchronously. light is more sensible to scattering by small Lidar...the raingauge records from the stations Jaen, in the central part of Andalusia, and Badajoz located in this region (Valladolid, Zamora, and Ciudad Real...EN 20-20.0.72H -- CIUDAD REAL Ix ( > to.I to- t-’l PERCENTAGE OF TIME ()PERCENTAGE OF ’TIME() Figure 9. Relative errors for Western Andalusia Figure 10

A modular tooling set-up for incremental sheet forming (ISF) with subsequent stress-relief annealing under partial constraints

NASA Astrophysics Data System (ADS)

Maqbool, Fawad; Bambach, Markus

2017-10-01

Incremental sheet forming (ISF) is a manufacturing process most suitable for small-batch production of sheet metal parts. In ISF, a CNC-controlled tool moves over the sheet metal, following a specified contour to form a part of the desired geometry. This study focuses on one of the dominant process limitations associated with the ISF, i.e., the limited geometrical accuracy. In this regard, a case study is performed which shows that increased geometrical accuracy of the formed part can be achieved by a using stress-relief annealing before unclamping. To keep the tooling costs low, a modular die design consisting of a stiff metal frame and inserts made from inexpensive plastics (Sika®) were devised. After forming, the plastics inserts are removed. The metal frame supports the part during stress-relief annealing. Finite Element (FE) simulations of the manufacturing process are performed. Due to the residual stresses induced during the forming, the geometry of the formed part, from FE simulation and the actual manufacturing process, shows severe distortion upon unclamping the part. Stress relief annealing of the formed part under partial constraints exerted by the tool frame shows that a part with high geometrical accuracy can be obtained.

Development of Methods and Equipment for Sheet Stamping

NASA Astrophysics Data System (ADS)

Botashev, A. Yu; Bisilov, N. U.; Malsugenov, R. S.

2018-03-01

New methods of sheet stamping were developed: the gas forming with double-sided heating of a blank part and the gas molding with backpressure. In case of the first method the blank part is heated to the set temperature by means of a double-sided impact of combustion products of gas mixtures, after which, under the influence of gas pressure a stamping process is performed. In case of gas molding with backpressure, the blank part is heated to the set temperature by one-sided impact of the combustion products, while backpressure is created on the opposite side of the blank part by compressed air. In both methods the deformation takes place in the temperature range of warm or hot treatment due to the heating of a blank part. This allows one to form parts of complicated shape within one technological operation, which significantly reduces the cost of production. To implement these methods, original devices were designed and produced, which are new types of forging and stamping equipment. Using these devices, an experimental research on the stamping process was carried out and high-quality parts were obtained, which makes it possible to recommend the developed methods of stamping in the industrial production. Their application in small-scale production will allow one to reduce the cost price of stamped parts 2 or 3 times.

Material degradation due to moisture and temperature. Part 1: mathematical model, analysis, and analytical solutions

NASA Astrophysics Data System (ADS)

Xu, C.; Mudunuru, M. K.; Nakshatrala, K. B.

2016-11-01

The mechanical response, serviceability, and load-bearing capacity of materials and structural components can be adversely affected due to external stimuli, which include exposure to a corrosive chemical species, high temperatures, temperature fluctuations (i.e., freezing-thawing), cyclic mechanical loading, just to name a few. It is, therefore, of paramount importance in several branches of engineering—ranging from aerospace engineering, civil engineering to biomedical engineering—to have a fundamental understanding of degradation of materials, as the materials in these applications are often subjected to adverse environments. As a result of recent advancements in material science, new materials such as fiber-reinforced polymers and multi-functional materials that exhibit high ductility have been developed and widely used, for example, as infrastructural materials or in medical devices (e.g., stents). The traditional small-strain approaches of modeling these materials will not be adequate. In this paper, we study degradation of materials due to an exposure to chemical species and temperature under large strain and large deformations. In the first part of our research work, we present a consistent mathematical model with firm thermodynamic underpinning. We then obtain semi-analytical solutions of several canonical problems to illustrate the nature of the quasi-static and unsteady behaviors of degrading hyperelastic solids.

Simulating the water budget of a Prairie Potholes complex from LiDAR and hydrological models in North Dakota, USA

USGS Publications Warehouse

Huang, Shengli; Young, Claudia; Abdul-Aziz, Omar I.; Dahal, Devendra; Feng, Min; Liu, Shuguang

2013-01-01

Hydrological processes of the wetland complex in the Prairie Pothole Region (PPR) are difficult to model, partly due to a lack of wetland morphology data. We used Light Detection And Ranging (LiDAR) data sets to derive wetland features; we then modelled rainfall, snowfall, snowmelt, runoff, evaporation, the “fill-and-spill” mechanism, shallow groundwater loss, and the effect of wet and dry conditions. For large wetlands with a volume greater than thousands of cubic metres (e.g. about 3000 m3), the modelled water volume agreed fairly well with observations; however, it did not succeed for small wetlands (e.g. volume less than 450 m3). Despite the failure for small wetlands, the modelled water area of the wetland complex coincided well with interpretation of aerial photographs, showing a linear regression with R2 of around 0.80 and a mean average error of around 0.55 km2. The next step is to improve the water budget modelling for small wetlands.

Probing a 2-aminobenzimidazole library for binding to RNA internal loops via two-dimensional combinatorial screening.

PubMed

Velagapudi, Sai Pradeep; Pushechnikov, Alexei; Labuda, Lucas P; French, Jonathan M; Disney, Matthew D

2012-11-16

There are many potential RNA drug targets in bacterial, viral, and human transcriptomes. However, there are few small molecules that modulate RNA function. This is due, in part, to a lack of fundamental understanding about RNA-ligand interactions including the types of small molecules that bind to RNA structural elements and the RNA structural elements that bind to small molecules. In an effort to better understand RNA-ligand interactions, we diversified the 2-aminobenzimidazole core (2AB) and probed the resulting library for binding to a library of RNA internal loops. We chose the 2AB core for these studies because it is a privileged scaffold for binding RNA based on previous reports. These studies identified that N-methyl pyrrolidine, imidazole, and propylamine diversity elements at the R1 position increase binding to internal loops; variability at the R2 position is well tolerated. The preferred RNA loop space was also determined for five ligands using a statistical approach and identified trends that lead to selective recognition.

Medical image segmentation using 3D MRI data

NASA Astrophysics Data System (ADS)

Voronin, V.; Marchuk, V.; Semenishchev, E.; Cen, Yigang; Agaian, S.

2017-05-01

Precise segmentation of three-dimensional (3D) magnetic resonance imaging (MRI) image can be a very useful computer aided diagnosis (CAD) tool in clinical routines. Accurate automatic extraction a 3D component from images obtained by magnetic resonance imaging (MRI) is a challenging segmentation problem due to the small size objects of interest (e.g., blood vessels, bones) in each 2D MRA slice and complex surrounding anatomical structures. Our objective is to develop a specific segmentation scheme for accurately extracting parts of bones from MRI images. In this paper, we use a segmentation algorithm to extract the parts of bones from Magnetic Resonance Imaging (MRI) data sets based on modified active contour method. As a result, the proposed method demonstrates good accuracy in a comparison between the existing segmentation approaches on real MRI data.

Intestinal microbiota, probiotics and mental health: from Metchnikoff to modern advances: Part II – contemporary contextual research

PubMed Central

2013-01-01

In recent years there has been a renewed interest concerning the ways in which the gastrointestinal tract – its functional integrity and microbial residents – might influence human mood (e.g. depression) and behavioral disorders. Once a hotbed of scientific interest in the early 20th century, this area lay dormant for decades, in part due to its association with the controversial term ‘autointoxication’. Here we review contemporary findings related to intestinal permeability, small intestinal bacterial overgrowth, lipopolysaccharide endotoxin (LPS) exposure, D-lactic acid, propionic acid, and discuss their relevance to microbiota and mental health. In addition, we include the context of modern dietary habits as they relate to depression, anxiety and their potential interaction with intestinal microbiota. PMID:23497633

[The role of miRNA in endometrial cancer in the context of miRNA 205].

PubMed

Wilczyński, Miłosz; Danielska, Justyna; Dzieniecka, Monika; Malinowski, Andrzej

2015-11-01

MiRNAs are small, non-coding molecules of ribonucleic acids of approximately 22 bp length, which serve as regulators of gene expression and protein translation due to interference with messenger RNA (mRNA). MiRNAs, which take part in the regulation of cell cycle and apoptosis, may be associated with carcinogenesis. Aberrant expression of miRNAs in endometrial cancer might contribute to the endometrial cancer initiation or progression, as well as metastasis formation, and may influence cancer invasiveness. Specific-miRNAs expressed in endometrial cancer tissues may serve as diagnostic markers of the disease, prognostic biomarkers, or play an important part in oncological therapy We aimed to describe the role of miRNAs in endometrial cancer with special consideration of miRNA 205.

Computational Approaches for Designing Protein/Inhibitor Complexes and Membrane Protein Variants

NASA Astrophysics Data System (ADS)

Vijayendran, Krishna Gajan

Drug discovery of small-molecule protein inhibitors is a vast enterprise that involves several scientific disciplines (i.e. genomics, cell biology, x-ray crystallography, chemistry, computer science, statistics), with each discipline focusing on a particular aspect of the process. In this thesis, I use computational and experimental approaches to explore the most fundamental aspect of drug discovery: the molecular interactions of small-molecules inhibitors with proteins. In Part I (Chapters I and II), I describe how computational docking approaches can be used to identify structurally diverse molecules that can inhibit multiple protein targets in the brain. I illustrate this approach using the examples of microtubule-stabilizing agents and inhibitors of cyclooxygenase(COX)-I and 5-lipoxygenase (5-LOX). In Part II (Chapters III and IV), I focus on membrane proteins, which are notoriously difficult to work with due to their low natural abundances, low yields for heterologous over expression, and propensities toward aggregation. I describe a general approach for designing water-soluble variants of membrane proteins, for the purpose of developing cell-free, label-free, detergent-free, solution-phase studies of protein structure and small-molecule binding. I illustrate this approach through the design of a water-soluble variant of the membrane protein Smoothened, wsSMO. This wsSMO stands to serve as a first-step towards developing membrane protein analogs of this important signaling protein and drug target.

Rubber pad forming - Efficient approach for the manufacturing of complex structured sheet metal blanks for food industry

NASA Astrophysics Data System (ADS)

Spoelstra, Paul; Djakow, Eugen; Homberg, Werner

2017-10-01

The production of complex organic shapes in sheet metals is gaining more importance in the food industry due to increasing functional and hygienic demands. Hence it is necessary to produce parts with complex geometries promoting cleanability and general sanitation leading to improvement of food safety. In this context, and especially when stainless steel has to be formed into highly complex geometries while maintaining desired surface properties, it is inevitable that alternative manufacturing processes will need to be used which meet these requirements. Rubber pad forming offers high potential when it comes to shaping complex parts with excellent surface quality, with virtually no tool marks and scratches. Especially in cases where only small series are to be produced, rubber pad forming processes offers both technological and economic advantages. Due to the flexible punch, variation in metal thickness can be used with the same forming tool. The investments to set-up Rubber pad forming is low in comparison to conventional sheet metal forming processes. The process facilitates production of shallow sheet metal parts with complex contours and bends. Different bending sequences in a multiple tool set-up can also be conducted. The planned contribution thus describes a brief overview of the rubber pad technology. It shows the prototype rubber pad forming machine which can be used to perform complex part geometries made from stainless steel (1.4301). Based on an analysis of the already existing systems and new machines for rubber pad forming processes, together with their process properties, influencing variables and areas of application, some relevant parts for the food industry are presented.

An effective model for LaTiO3 using first principles quantum Monte Carlo

NASA Astrophysics Data System (ADS)

Williams, Kiel; Wagner, Lucas

The rare earth perovskites have long been of interest due in part to the interplay of their geometries and electronic properties. The perovskite LaTiO3 in particular is an antiferromagnetic insulator with a small 0.2 eV band gap that displays the GdFeO3 distortion at ambient pressure. We apply a new technique to derive an effective model for LaTiO3 as a function of the distortion. Since this technique treats one and two-body degrees of freedom on an equal footing, we use it to evaluate the evolution of effective model parameters with changes in the lattice. We will report on the progress in assessing whether the insulating nature is due to the distortion, or vice versa.

Forest owners' perceptions of ecotourism: Integrating community values and forest conservation.

PubMed

Rodríguez-Piñeros, Sandra; Mayett-Moreno, Yesica

2015-03-01

The use of forest land for ecotourism has been well accepted due to its ability to provide income to local people and to conserve the forest. Preparing the forest with infrastructure to attract and educate visitors has been reported of importance. This study applied Q methodology in a small rural community of the State of Puebla, Mexico, to reveal forest owners' perceptions to build infrastructure in their forest as part of their ecotourism project. It also discloses forest owners' underlying motives to use their forest for ecotourism. Ecotourism is perceived as a complementary activity to farming that would allow women to be involved in community development. Low impact infrastructure is desired due to forest owners' perception to preserve the forest for the overall community well-being.

McTwo: a two-step feature selection algorithm based on maximal information coefficient.

PubMed

Ge, Ruiquan; Zhou, Manli; Luo, Youxi; Meng, Qinghan; Mai, Guoqin; Ma, Dongli; Wang, Guoqing; Zhou, Fengfeng

2016-03-23

High-throughput bio-OMIC technologies are producing high-dimension data from bio-samples at an ever increasing rate, whereas the training sample number in a traditional experiment remains small due to various difficulties. This "large p, small n" paradigm in the area of biomedical "big data" may be at least partly solved by feature selection algorithms, which select only features significantly associated with phenotypes. Feature selection is an NP-hard problem. Due to the exponentially increased time requirement for finding the globally optimal solution, all the existing feature selection algorithms employ heuristic rules to find locally optimal solutions, and their solutions achieve different performances on different datasets. This work describes a feature selection algorithm based on a recently published correlation measurement, Maximal Information Coefficient (MIC). The proposed algorithm, McTwo, aims to select features associated with phenotypes, independently of each other, and achieving high classification performance of the nearest neighbor algorithm. Based on the comparative study of 17 datasets, McTwo performs about as well as or better than existing algorithms, with significantly reduced numbers of selected features. The features selected by McTwo also appear to have particular biomedical relevance to the phenotypes from the literature. McTwo selects a feature subset with very good classification performance, as well as a small feature number. So McTwo may represent a complementary feature selection algorithm for the high-dimensional biomedical datasets.

Models Support Energy-Saving Microwave Technologies

NASA Technical Reports Server (NTRS)

2012-01-01

During the Apollo Program, astronauts on the Moon encountered a small menace that created big problems: lunar dust. Similar to how tiny bits of Styrofoam behave on Earth adhering to anything they touch lunar dust sticks to spacesuits, spacecraft, tools, and equipment, and is extremely difficult to remove. The clingy nature of the substance is partly due to its electrostatic charge but is also due to its physical characteristics: The sharp, irregularly shaped grains have edges like burrs and feel like abrasive talcum powder to the touch. Not only a nuisance, Moon dust is also a potential health and safety risk. Because it is often laden with ultraviolet radiation and high iron content, it can be detrimental if it gets into the eyes or lungs. In fact, some of the particles are so small that the human body does not even detect them in order to expel them. On the Apollo missions, equipment covered with the dark-colored Moon dust suffered from the absorption of sunlight and tended to overheat. NASA has investigated tools and techniques to manage the sticky stuff, including magnets, vacuums, and shields. In 2009, Kennedy Space Center collaborated with a small business to investigate a method to harden the Moon's surface in a sense, to pave the surface so astronauts and robots could land, drive, and work without disrupting and scattering the material.

Morphological study on small molecule acceptor-based organic solar cells with efficiencies beyond 7% (Presentation Recording)

NASA Astrophysics Data System (ADS)

Ma, Wei; Yan, He

2015-10-01

Despite the essential role of fullerenes in achieving best-performance organic solar cells (OSCs), fullerene acceptors have several drawbacks including poor light absorption, high-cost production and purification. For this reason, small molecule acceptor (SMA)-based OSCs have attracted much attention due to the easy tunability of electronic and optical properties of SMA materials. In this study, polymers with temperature dependent aggregation behaviors are combined with various small molecule acceptor materials, which lead to impressive power conversion efficiencies of up to 7.3%. The morphological and aggregation properties of the polymer:small molecule blends are studied in details. It is found that the temperature-dependent aggregation behavior of polymers allows for the processing of the polymer solutions at moderately elevated temperature, and more importantly, controlled aggregation and strong crystallization of the polymer during the film cooling and drying process. This results in a well-controlled and near-ideal polymer:small molecule morphology that is controlled by polymer aggregation during warm casting and thus insensitive to the choice of small molecules. As a result, several cases of highly efficient (PCE between 6-7.3%) SMA OSCs are achieved. The second part of this presentation will describe the morphology of a new small molecule acceptor with a unique 3D structure. The relationship between molecular structure and morphology is revealed.

Origin of variolitic lavas: Evidence for variolites in axial part of the Mid-Atlantic Ridge, 6oN

NASA Astrophysics Data System (ADS)

Sharkov, Evgenii; Krssivskaya, Irina; Chistyakov, Alexei

2010-05-01

Fragment of variolitic lavas was dredged in axial part of the MAR at 6oN during 10th cruise of R/V "Akademik Ioffe" (2001-2002). It is rock where rounded globules of andesite (icelandite) with light trachyandesite rims are enclosed in high-Ti picrobasalt matrix. The sample can be subdivided in two different structural parts, or "layers". One of them densely saturated by globules, which closely adjoin to each other, merge in clumpy congregations with small quantity of matrix material in interstices. In the other part of the sample matrix predominates. Isolated, sometimes sticked together globules "swim" in the matrix and their quantity and size quickly decrease to the sample edge, where only small rare globules occur. Boundary between both parts, even if irregular due to rounded shape of closed globules, nevertheless is well-defined and has small bays of the matrix material. So, globules were moved in picrobasalt melt and floated up to the surface of the lava flow. It is shown that formation of the leucocratic rims was evidently linked with thermal diffusion phenomenon (Soret principle) in cooling heterogeneous melt. According to this principle, components in solutions and melts, placed in thermal gradient, are redistributed for leveling of internal energy in that way, when light elements migrate to hot parts and heavy ones to cold. Experimental studies of thermal diffusion in samples of MORB showed enlarge of Si, Al, Na and K concentration to side of hot area of melt and Fe, Mg, Ca, etc. to cold one; resulting melts were Qtz-normative andesites and Ne-normative picrite (Walker, DeLong, 1982). The same picture we saw in our sample: enrichment of external zone of globules by Si, Al, and, especially, by high-mobile Na, which diffusion rate in silicate melts in some order higher than speed of remaining elements (Watson, 1982; Borisov, 2008). Simultaneously, this zone impoverished by Fe, Ca and Mg, which were concentrated in rear of rims, forming internal zoning of globules with careless boundaries. Effect of thermal diffusion in more important for Fe; as a result #mg in trachyandesite rims higher than in andesite cores of globules. It suggests that origin of variolites was linked with intersection by ascended column of picrobasaltic magma of existed at that time in crust above small shallow magmatic chamber with residual melt of andesite (icelandite) in composition, which was involved in general upwards current. Because ascending of magmas in axial part of the MAR was whirl (Sharkov et al., 2008), alien melt was dispersed on small drops, but, however, had not time to dissolved in host picrite melt. Formation of proper variolites was occurred in process of moving and cooling of such heterogeneous lava on oceanic floor.. From this follows that axial parts of low-spreading ridges have very complicate structure, where different melts can coexist. There are no any evidence of liquid immiscibility the variolite origin The same petrological features are typical for classic Paleoproterozoic variolites of the Yal-Guba, Onega Lake, Karelia, which are also pillow-lavas. They were firstly described by F.Yu. Levinson-Lessing in 1920th. We conclude that variolite formation are linked with complex magmatic systems where small shallow magma chambers with evolved melt were intersected by streams of new magma portions from deep-seated source. Indispensable condition for variolites is contrasting composition of the magmas which allow to clearly see this phenomenon.

13 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 113

Code of Federal Regulations, 2010 CFR

2010-01-01

... innovation and research Small Business Act, sec. 9. Procurement automated source system. Small Business Act... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Appendix A to Subpart A of Part 113 A Appendix A to Subpart A of Part 113 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION...

Fixture for mounting small parts for processing

DOEpatents

Foreman, Larry R.; Gomez, Veronica M.; Thomas, Michael H.

1990-01-01

A fixture for mounting small parts, such as fusion target spheres or microelectronic components. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing.

22 CFR Appendix A to Part 145 - Clauses for Contracts and Small Purchases Awarded by Recipient

Code of Federal Regulations, 2014 CFR

2014-04-01

... Awarded by Recipient A Appendix A to Part 145 Foreign Relations DEPARTMENT OF STATE CIVIL RIGHTS GRANTS.... 145, App. A Appendix A to Part 145—Clauses for Contracts and Small Purchases Awarded by Recipient All contracts and small purchases, awarded by a recipient who is subject to this regulation, shall contain the...

22 CFR Appendix A to Part 145 - Clauses for Contracts and Small Purchases Awarded by Recipient

Code of Federal Regulations, 2013 CFR

2013-04-01

... Awarded by Recipient A Appendix A to Part 145 Foreign Relations DEPARTMENT OF STATE CIVIL RIGHTS GRANTS.... 145, App. A Appendix A to Part 145—Clauses for Contracts and Small Purchases Awarded by Recipient All contracts and small purchases, awarded by a recipient who is subject to this regulation, shall contain the...

22 CFR Appendix A to Part 145 - Clauses for Contracts and Small Purchases Awarded by Recipient

Code of Federal Regulations, 2012 CFR

2012-04-01

... Awarded by Recipient A Appendix A to Part 145 Foreign Relations DEPARTMENT OF STATE CIVIL RIGHTS GRANTS.... 145, App. A Appendix A to Part 145—Clauses for Contracts and Small Purchases Awarded by Recipient All contracts and small purchases, awarded by a recipient who is subject to this regulation, shall contain the...

Airborne observations of the microphysical structure of two contrasting cirrus clouds

NASA Astrophysics Data System (ADS)

O'Shea, S. J.; Choularton, T. W.; Lloyd, G.; Crosier, J.; Bower, K. N.; Gallagher, M.; Abel, S. J.; Cotton, R. J.; Brown, P. R. A.; Fugal, J. P.; Schlenczek, O.; Borrmann, S.; Pickering, J. C.

2016-11-01

We present detailed airborne in situ measurements of cloud microphysics in two midlatitude cirrus clouds, collected as part of the Cirrus Coupled Cloud-Radiation Experiment. A new habit recognition algorithm for sorting cloud particle images using a neural network is introduced. Both flights observed clouds that were related to frontal systems, but one was actively developing while the other dissipated as it was sampled. The two clouds showed distinct differences in particle number, habit, and size. However, a number of common features were observed in the 2-D stereo data set, including a distinct bimodal size distribution within the higher-temperature regions of the clouds. This may result from a combination of local heterogeneous nucleation and large particles sedimenting from aloft. Both clouds had small ice crystals (<100 µm) present at all levels However, this small ice mode is not present in observations from a holographic probe. This raises the possibility that the small ice observed by optical array probes may at least be in part an instrument artifact due to the counting of out-of-focus large particles as small ice. The concentrations of ice crystals were a factor 10 higher in the actively growing cloud with the stronger updrafts, with a mean concentration of 261 L-1 compared to 29 L-1 in the decaying case. Particles larger than 700 µm were largely absent from the decaying cirrus case. A comparison with ice-nucleating particle parameterizations suggests that for the developing case the ice concentrations at the lowest temperatures are best explained by homogenous nucleation.

Numerical modelling of fault reactivation in carbonate rocks under fluid depletion conditions - 2D generic models with a small isolated fault

NASA Astrophysics Data System (ADS)

Zhang, Yanhua; Clennell, Michael B.; Delle Piane, Claudio; Ahmed, Shakil; Sarout, Joel

2016-12-01

This generic 2D elastic-plastic modelling investigated the reactivation of a small isolated and critically-stressed fault in carbonate rocks at a reservoir depth level for fluid depletion and normal-faulting stress conditions. The model properties and boundary conditions are based on field and laboratory experimental data from a carbonate reservoir. The results show that a pore pressure perturbation of -25 MPa by depletion can lead to the reactivation of the fault and parts of the surrounding damage zones, producing normal-faulting downthrows and strain localization. The mechanism triggering fault reactivation in a carbonate field is the increase of shear stresses with pore-pressure reduction, due to the decrease of the absolute horizontal stress, which leads to an expanded Mohr's circle and mechanical failure, consistent with the predictions of previous poroelastic models. Two scenarios for fault and damage-zone permeability development are explored: (1) large permeability enhancement of a sealing fault upon reactivation, and (2) fault and damage zone permeability development governed by effective mean stress. In the first scenario, the fault becomes highly permeable to across- and along-fault fluid transport, removing local pore pressure highs/lows arising from the presence of the initially sealing fault. In the second scenario, reactivation induces small permeability enhancement in the fault and parts of damage zones, followed by small post-reactivation permeability reduction. Such permeability changes do not appear to change the original flow capacity of the fault or modify the fluid flow velocity fields dramatically.

Use of a time-domain electromagnetic method with geochemical tracers to explore the salinity anomalies in a small coastal aquifer in north-eastern Tunisia

NASA Astrophysics Data System (ADS)

Chekirbane, Anis; Tsujimura, Maki; Kawachi, Atsushi; Lachaal, Fethi; Isoda, Hiroko; Tarhouni, Jamila

2014-12-01

The study area is a small coastal plain in north-eastern Tunisia. It is drained by an ephemeral stream network and is subject to several pollutant discharges such as oilfield brine coming from a neighboring oil company and wastewater from Somâa city, located in the upstream of the plain. Furthermore, a hydraulic head near the coastal part of the aquifer is below sea level, suggesting that seawater intrusion may occur. A time-domain electromagnetic (TDEM) survey, based on 28 soundings, was conducted in Wadi Al Ayn and Daroufa plains to delineate the saline groundwater. Based on longitudinal and transversal resistivity two-dimensional pseudosections calibrated with boring data, the extent of saline water was identified. Geochemical tracers were combined with the resistivity dataset to differentiate the origin of groundwater salinization. In the upstream part of the plain, the infiltration of oilfield brine through the sandy bed of Wadi Al Ayn seems to have a considerable effect on groundwater salinization. However, in the coastal part of the aquifer, groundwater salinization is due to seawater intrusion and the saltwater is reaching an inland extent around 1.3 km from the shoreline. The contribution ratios of saline water bodies derived from the inverted chloride data vary for the oilfield brine from 1 to 13 % and for the seawater from 2 to 21 %.

Mach 6 electroformed nickel nozzle refurbishment: FNAS investigation of ultra-smooth surfaces

NASA Technical Reports Server (NTRS)

Rood, Robert; Griffith, Charles; Engelhaupt, Darell; Cernosek, John

1992-01-01

The task objective has been to apply a coating of nickel-phosphorous alloy to a laminar flow wind tunnel nozzle by catalytic deposition and then polish and inspect the inside surface using optical device processes. The surface of the nozzle was coated with a nickel-phosphorous alloy of sufficient hardness and corrosion resistance to improve the durability. Due to plating defects that were clearly process related and not inherent, the final polished part was less than the desired quality. Surface finishing processes and lapping media were identified which produced a submicron surface finish on the interior plated surface. Defects apparently manifested by the first plating attempt were repaired using a small brush plating process demonstrating that individual small defects can be repaired. Measurement and analysis by profilometry demonstrated that quantitative control of the surface can be achieved.

Helping Small Businesses Make It. Critical Issues Series, no. 1.

ERIC Educational Resources Information Center

Persons, Edgar A.

This booklet describes the Minnesota model for small business management education. The content is presented in five parts. The first discusses the economic role of small business and the need for small business management education. Part 2 discusses the development of the Minnesota model for management education for both farmers and small…

Nuclear quantum effects in water exchange around lithium and fluoride ions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilkins, David M.; Manolopoulos, David; Dang, Liem X.

2015-02-14

We employ classical and ring polymer molecular dynamics simulations to study the effect of nuclear quantum fluctuations on the structure and the water exchange dynamics of aqueous solutions of lithium and fluoride ions. While we obtain reasonably good agreement with experimental data for solutions of lithium by augmenting the Coulombic interactions between the ion and the water molecules with a standard Lennard-Jones ion-oxygen potential, the same is not true for solutions of fluoride, for which we find that a potential with a softer repulsive wall gives much better agreement. A small degree of destabilization of the first hydration shell ismore » found in quantum simulations of both ions when compared with classical simulations, with the shell becoming less sharply defined and the mean residence time of the water molecules in the shell decreasing. In line with these modest differences, we find that the mechanisms of the water exchange reactions are unaffected by quantization, so a classical description of these reactions gives qualitatively correct and quantitatively reasonable results. We also find that the quantum effects in solutions of lithium are larger than in solutions of fluoride. This is partly due to the stronger interaction of lithium with water molecules, partly due to the lighter mass of lithium, and partly due to competing quantum effects in the hydration of fluoride, which are absent in the hydration of lithium. LXD was supported by US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences.« less

Fixture for mounting small parts for processing

DOEpatents

Foreman, L.R.; Gomez, V.M.; Thomas, M.H.

1990-05-29

A fixture for mounting small parts, such as fusion target spheres or microelectronic components is disclosed. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing. 5 figs.

14 CFR 21.27 - Issue of type certificate: surplus aircraft of the Armed Forces.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 1 Small reciprocating-engine powered airplanes Before May 16, 1956After May 15, 1956 CAR Part 3, as effective May 15, 1956.CAR Part 3, or FAR Part 23. Small turbine engine-powered airplanes Before Oct. 2... Part 25. Large turbine engine-powered airplanes Before Oct. 2, 1959After Oct. 1, 1959 CAR Part 4b, as...

Small bowel intussusception due to a primary non-Hodgkin's lymphoma. An unusual presentation and clinical course.

PubMed

Salemis, Nikolaos S; Tsiambas, Evangelos; Liatsos, Christos; Karameris, Andreas; Tsohataridis, Efstathios

2010-12-01

Adult intussusception is a rare clinical entity accounting for 5% of all intussusceptions. Symptoms and signs are often vague and non-specific making a preoperative diagnosis difficult. The purpose of this study is to present a rare case of a jejuno-jejunal intussusception due to primary intestinal non-Hodgkin's lymphoma in a patient with an unusual clinical course. A 78-year-old man presented with a 1-month history of abdominal pain, nausea, epigastric fullness, and weight loss. Computed tomography scan and ultrasonography findings were suggestive of small bowel intussusception. Laparotomy revealed a jejuno-jejunal intussusception caused by a primary B cell non-Hodgkin's lymphoma 20 cm distal to the ligament of Treitz. Resection without prior reduction was performed. The patient refused postoperative adjuvant chemotherapy. Seven months later, he presented with upper gastrointestinal bleeding, and the diagnostic evaluation revealed gastric infiltration of large B cell non-Hodgkin's lymphoma. Despite chemotherapy, he died of disseminated progressive disease 7 months later. Adult jejuno-jejunal intussusception due to primary non-Hodgkin's lymphoma is a rare clinical entity. A high index of suspicion is needed as symptoms and signs are not pathognomonic. Appropriate investigations can lead to a prompt preoperative diagnosis. Resection without prior reduction is the treatment of choice. Our patient's refusal of postoperative adjuvant chemotherapy likely resulted in relapse of the disease in another part of the gastrointestinal tract.

Multistrategy learning: A case study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Domingos, P.

1996-12-31

Two of the most popular approaches to induction are instance-based learning (IBL) and rule generation. Their strengths and weaknesses are largely complementary. IBL methods are able to identify small details in the instance space, but have trouble with attributes that are relevant in some parts of the space but not others. Conversely, rule induction methods may overlook small exception regions, but are able to select different attributes in different parts of the instance space. The two methods have been unified in the RISE algorithm. RISE views instances as maximally specific rules, forms more general rules by gradually clustering instances ofmore » the same class, and classifies a test example by letting the nearest rule win. This approach potentially combines the advantages of rule induction and IBL, and has indeed been observed to be more accurate than each on a large number of bench-mark datasets. However, it is important to determine if this performance is indeed due to the hypothesized advantages, and to define the situations in which RISE`s bias will and will not be preferable to those of the individual approaches. This abstract reports experiments to this end in artificial domains.« less

Detailed Geological Modelling in Urban Areas focused on Structures relevant to the Near Surface Groundwater Flow in the context of Climatic Changes

NASA Astrophysics Data System (ADS)

Bach, T.; Pallesen, T. M.; Jensen, N. P.; Mielby, S.; Sandersen, P.; Kristensen, M.

2015-12-01

This case demonstrates a practical example from the city of Odense (DK) where new geological modeling techniques has been developed and used in the software GeoScene3D, to create a detailed voxel model of the anthropogenic layer. The voxel model has been combined with a regional hydrostratigraphic layer model. The case is part of a pilot project partly financed by VTU (Foundation for Development of Technology in the Danish Water Sector) and involves many different datatypes such as borehole information, geophysical data, human related elements (landfill, pipelines, basements, roadbeds etc). In the last few years, there has been increased focus on detailed geological modeling in urban areas. The models serve as important input to hydrological models. This focus is partly due to climate changes as high intensity rainfalls are seen more often than in the past, and water recharge is a topic too. In urban areas, this arises new challenges. There is a need of a high level of detailed geological knowledge for the uppermost zone of the soil, which typically are problematic due to practically limitations, especially when using geological layer models. Furthermore, to accommodate the need of a high detail, all relevant available data has to be used in the modeling process. Human activity has deeply changed the soil layers, e.g. by constructions as roadbeds, buildings with basements, pipelines, landfill etc. These elements can act as barriers or pathways regarding surface near groundwater flow and can attribute to local flooding or mobilization and transport of contaminants etc. A geological voxel model is built by small boxes (a voxel). Each box can contain several parameters, ex. lithology, transmissivity or contaminant concentration. Human related elements can be implemented using tools, which gives the modeler advanced options for making detailed small-scale models. This case demonstrates the workflow and the resulting geological model for the pilot area.

Carbon Dots and 9AA as a Binary Matrix for the Detection of Small Molecules by Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry

NASA Astrophysics Data System (ADS)

Chen, Yongli; Gao, Dan; Bai, Hangrui; Liu, Hongxia; Lin, Shuo; Jiang, Yuyang

2016-07-01

Application of matrix-assisted laser-desorption/ionization mass spectrometry (MALDI MS) to analyze small molecules have some limitations, due to the inhomogeneous analyte/matrix co-crystallization and interference of matrix-related peaks in low m/z region. In this work, carbon dots (CDs) were for the first time applied as a binary matrix with 9-Aminoacridine (9AA) in MALDI MS for small molecules analysis. By 9AA/CDs assisted desorption/ionization (D/I) process, a wide range of small molecules, including nucleosides, amino acids, oligosaccharides, peptides, and anticancer drugs with a higher sensitivity were demonstrated in the positive ion mode. A detection limit down to 5 fmol was achieved for cytidine. 9AA/CDs matrix also exhibited excellent reproducibility compared with 9AA matrix. Moreover, by exploring the ionization mechanism of the matrix, the influence factors might be attributed to the four parts: (1) the strong UV absorption of 9AA/CDs due to their π-conjugated network; (2) the carboxyl groups modified on the CDs surface act as protonation sites for proton transfer in positive ion mode; (3) the thin layer crystal of 9AA/CDs could reach a high surface temperature more easily and lower transfer energy for LDI MS; (4) CDs could serve as a matrix additive to suppress 9AA ionization. Furthermore, this matrix was allowed for the analysis of glucose as well as nucleosides in human urine, and the level of cytidine was quantified with a linear range of 0.05-5 mM (R2 > 0.99). Therefore, the 9AA/CDs matrix was proven to be an effective MALDI matrix for the analysis of small molecules with improved sensitivity and reproducibility. This work provides an alternative solution for small molecules detection that can be further used in complex samples analysis.

Small Group Teaching: A Trouble-Shooting Guide, Monograph Series/22.

ERIC Educational Resources Information Center

Tiberius, Richard G.

This guidebook focuses on the problems facing teachers in small group teaching. It is organized in three parts, each dealing with a specific common problem. Part One deals with clarifying instructional goals for the group. Part Two concerns interaction within the group and between the students and the teacher. Part Three encompasses the…

13 CFR 107.40 - How to read this part 107.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false How to read this part 107. 107.40 Section 107.40 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES Introduction to Part 107 § 107.40 How to read this part 107. (a) Center Headings. All references...

13 CFR 107.20 - Legal basis and applicability of this part 107.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Legal basis and applicability of this part 107. 107.20 Section 107.20 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES Introduction to Part 107 § 107.20 Legal basis and applicability of this part...

Study of the polarimetric performance of a Si/CdTe semiconductor Compton camera for the Hitomi satellite

NASA Astrophysics Data System (ADS)

Katsuta, Junichiro; Edahiro, Ikumi; Watanabe, Shin; Odaka, Hirokazu; Uchida, Yusuke; Uchida, Nagomi; Mizuno, Tsunefumi; Fukazawa, Yasushi; Hayashi, Katsuhiro; Habata, Sho; Ichinohe, Yuto; Kitaguchi, Takao; Ohno, Masanori; Ohta, Masayuki; Takahashi, Hiromitsu; Takahashi, Tadayuki; Takeda, Shin'ichiro; Tajima, Hiroyasu; Yuasa, Takayuki; Itou, Masayoshi; SGD Team

2016-12-01

Gamma-ray polarization offers a unique probe into the geometry of the γ-ray emission process in celestial objects. The Soft Gamma-ray Detector (SGD) onboard the X-ray observatory Hitomi is a Si/CdTe Compton camera and is expected to be an excellent polarimeter, as well as a highly sensitive spectrometer due to its good angular coverage and resolution for Compton scattering. A beam test of the final-prototype for the SGD Compton camera was conducted to demonstrate its polarimetric capability and to verify and calibrate the Monte Carlo simulation of the instrument. The modulation factor of the SGD prototype camera, evaluated for the inner and outer parts of the CdTe sensors as absorbers, was measured to be 0.649-0.701 (inner part) and 0.637-0.653 (outer part) at 122.2 keV and 0.610-0.651 (inner part) and 0.564-0.592 (outer part) at 194.5 keV at varying polarization angles with respect to the detector. This indicates that the relative systematic uncertainty of the modulation factor is as small as ∼ 3 % .

Thermal conductivity of an imperfect anharmonic crystal

NASA Astrophysics Data System (ADS)

Sahu, D. N.; Sharma, P. K.

1983-09-01

The thermal conductivity of an anharmonic crystal containing randomly distributed substitutional defects due to impurity-phonon scattering is theoretically investigated with the use of the method of double-time thermal Green's functions and the Kubo formalism considering all the terms, i.e., diagonal, nondiagonal, cubic anharmonic, and imperfection terms in the energy-flux operator as propounded by Hardy. The study uses cubic, quartic anharmonic, and defect terms in the Hamiltonian. Mass changes as well as force-constant changes between impurity and host-lattice atoms are taken into account explicitly. It is shown that the total conductivity can be written as a sum of contributions, namely diagonal, nondiagonal, anharmonic, and imperfection contributions. For phonons of small halfwidth, the diagonal contribution has precisely the same form which is obtained from Boltzmann's transport equation for impurity scattering in the relaxation-time approximation. The present study shows that there is a finite contribution of the nondiagonal term, cubic anharmonic term, and the term due to lattice imperfections in the energy-flux operator to the thermal conductivity although the contribution is small compared with that from the diagonal part. We have also discussed the feasibility of numerical evaluation of the various contributions to the thermal conductivity.

Wolves-coyotes-foxes: a cascade among carnivores.

PubMed

Levi, Taal; Wilmers, Christopher C

2012-04-01

Due to the widespread eradication of large canids and felids, top predators in many terrestrial ecosystems are now medium-sized carnivores such as coyotes. Coyotes have been shown to increase songbird and rodent abundance and diversity by suppressing populations of small carnivores such as domestic cats and foxes. The restoration of gray wolves to many parts of North America, however, could alter this interaction chain. Here we use a 30-year time series of wolf, coyote, and fox relative abundance from the state of Minnesota, USA, to show that wolves suppress coyote populations, which in turn releases foxes from top-down control by coyotes. In contrast to mesopredator release theory, which has often considered the consequence of top predator removal in a three-species interaction chain (e.g., coyote-fox-prey), the presence of the top predator releases the smaller predator in a four-species interaction chain. Thus, heavy predation by abundant small predators might be more similar to the historical ecosystem before top-predator extirpation. The restructuring of predator communities due to the loss or restoration of top predators is likely to alter the size spectrum of heavily consumed prey with important implications for biodiversity and human health.

Ab initio calculations of optical properties of silver clusters: cross-over from molecular to nanoscale behavior

NASA Astrophysics Data System (ADS)

Titantah, John T.; Karttunen, Mikko

2016-05-01

Electronic and optical properties of silver clusters were calculated using two different ab initio approaches: (1) based on all-electron full-potential linearized-augmented plane-wave method and (2) local basis function pseudopotential approach. Agreement is found between the two methods for small and intermediate sized clusters for which the former method is limited due to its all-electron formulation. The latter, due to non-periodic boundary conditions, is the more natural approach to simulate small clusters. The effect of cluster size is then explored using the local basis function approach. We find that as the cluster size increases, the electronic structure undergoes a transition from molecular behavior to nanoparticle behavior at a cluster size of 140 atoms (diameter ~1.7 nm). Above this cluster size the step-like electronic structure, evident as several features in the imaginary part of the polarizability of all clusters smaller than Ag147, gives way to a dominant plasmon peak localized at wavelengths 350 nm ≤ λ ≤ 600 nm. It is, thus, at this length-scale that the conduction electrons' collective oscillations that are responsible for plasmonic resonances begin to dominate the opto-electronic properties of silver nanoclusters.

Polarimetric, Two-Color, Photon-Counting Laser Altimeter Measurements of Forest Canopy Structure

NASA Technical Reports Server (NTRS)

Harding, David J.; Dabney, Philip W.; Valett, Susan

2011-01-01

Laser altimeter measurements of forest stands with distinct structures and compositions have been acquired at 532 nm (green) and 1064 nm (near-infrared) wavelengths and parallel and perpendicular polarization states using the Slope Imaging Multi-polarization Photon Counting Lidar (SIMPL). The micropulse, single photon ranging measurement approach employed by SIMPL provides canopy structure measurements with high vertical and spatial resolution. Using a height distribution analysis method adapted from conventional, 1064 nm, full-waveform lidar remote sensing, the sensitivity of two parameters commonly used for above-ground biomass estimation are compared as a function of wavelength. The results for the height of median energy (HOME) and canopy cover are for the most part very similar, indicating biomass estimations using lidars operating at green and near-infrared wavelengths will yield comparable estimates. The expected detection of increasing depolarization with depth into the canopies due to volume multiple-scattering was not observed, possibly due to the small laser footprint and the small detector field of view used in the SIMPL instrument. The results of this work provide pathfinder information for NASA's ICESat-2 mission that will employ a 532 nm, micropulse, photon counting laser altimeter.

Application of the 2-piece orthodontic C-implant for provisional restoration with laser welded customized coping: a case report.

PubMed

Paek, Janghyun; Ahn, Hyo-Won; Jeong, Do-Min; Shim, Jeong-Seok; Kim, Seong-Hun; Chung, Kyu-Rhim

2015-03-25

This article presents the application of laser welding technique to fabricate an orthodontic mini-implant provisional restoration in missing area after limited orthodontic treatment. A 15-year-old boy case is presented. Two-piece orthodontic C-implant was placed after regaining space for missing right mandibular central incisor. Due to angular deviation of implant, customized abutment was required. Ready-made head part was milled and lingual part of customized abutment was made with non-precious metal. Two parts then were laser welded (Master 1000, Elettrolaser Italy, Verona, Italy) and indirect lab composite (3 M ESPE Sinfony, St. Paul, MN, USA) was built up. The patient had successful result, confirmed by clinical and radiographic examinations. Before the patient is ready to get a permanent restoration later on, this provisional restoration will be used. This case shows that a two-piece orthodontic C-implant system can be used to maintain small edentulous space after orthodontic treatment.

Object-Part Attention Model for Fine-Grained Image Classification

NASA Astrophysics Data System (ADS)

Peng, Yuxin; He, Xiangteng; Zhao, Junjie

2018-03-01

Fine-grained image classification is to recognize hundreds of subcategories belonging to the same basic-level category, such as 200 subcategories belonging to the bird, which is highly challenging due to large variance in the same subcategory and small variance among different subcategories. Existing methods generally first locate the objects or parts and then discriminate which subcategory the image belongs to. However, they mainly have two limitations: (1) Relying on object or part annotations which are heavily labor consuming. (2) Ignoring the spatial relationships between the object and its parts as well as among these parts, both of which are significantly helpful for finding discriminative parts. Therefore, this paper proposes the object-part attention model (OPAM) for weakly supervised fine-grained image classification, and the main novelties are: (1) Object-part attention model integrates two level attentions: object-level attention localizes objects of images, and part-level attention selects discriminative parts of object. Both are jointly employed to learn multi-view and multi-scale features to enhance their mutual promotions. (2) Object-part spatial constraint model combines two spatial constraints: object spatial constraint ensures selected parts highly representative, and part spatial constraint eliminates redundancy and enhances discrimination of selected parts. Both are jointly employed to exploit the subtle and local differences for distinguishing the subcategories. Importantly, neither object nor part annotations are used in our proposed approach, which avoids the heavy labor consumption of labeling. Comparing with more than 10 state-of-the-art methods on 4 widely-used datasets, our OPAM approach achieves the best performance.

Design, Growth, and Characterization of Mid Infrared and Terahertz Detectors Based on Nanostructures

NASA Astrophysics Data System (ADS)

Choi, Jae Kyu

In the first part of the dissertation, I present the design, growth, and characterization a multi-color quantum well infrared photodetecor (QWIP). The QWIP is based on GaAs/Al0.2Ga0.8As coupled double-quantum-well structure with asymmetric doping of the wells. The asymmetry resulted into a new property of the detector -- voltage tunability of the QWIP multicolor spectrum. Three major mechanisms contributing into the photoresponse were analyzed: 1) electron energy level shifting due to the quantum-confined Stark effect, 2) tunneling process at the triangular tip of barrier, which is known Fowler-Nordheim effect, and 3) thermoactivation processes. The experimental and theoretical results are in good agreement with the simulation results using Matlab and nextnano3 software. The QWIP structure was grown by the solid source molecular beam epitaxy, and was experimentally characterized by performing current-voltage characteristics and spectral photoresponse measurement. The effective voltage tunability and switchability of spectral photoresponse were demonstrated in the spectral range between 7.5 ˜ 11.1 mum. The low noise QWIP operation (at the dark current as low as 3 ?10-3 A/cm2) was demonstrated up to 60 K. The results are promising for development of accurate remote temperature sensing. In the second part, we present the results on design, fabrication, and characterization of a hot-electron bolometer based on low mobility 2-D electron gas (2-DEG) in an AlGaN/GaN heterostructure. The characterization of the hot-electron bolometer (HEB) demonstrated that we could simultaneously achieve the following conditions required for successful operation of 2-DEG HEB: 1) strong coupling to incident THz radiation due to strong Drude absorption; 2) significant THz heating of 2-DEG due to the small value of the electron heat capacity: and 3) high responsivity due to the strong temperature dependence of 2-DEG resistance. We identified THz response from our HEBs as a bolometric effect through modulation dependent photoresponse measurement. Low contact resistance achieved in our devices ensures that THz radiation couples primarily to the 2-DEG. Due to a small electron momentum relaxation time, the real part of the 2-DEG sensor impedance is ˜ 50-100 Ohm, which provides good impedance matching between sensors and antennas. For effective THz coupling to 2-DEG, a variety of THz planar antennas have been designed, tested, and optimized. The room temperature responsivity of our devices reaches ˜0.04 A/W at 2.55 THz along with a noise equivalent power of ˜5 nW/Hz1/2. Finally, prospects for high performance of HEBs by improving the design of the sensor and THz coupling to 2DEG design are proposed.

DNA barcoding of an invasive mammal species, the small Indian mongoose (Herpestes javanicus; E. Geoffroy Saint-Hillaire 1818) in the Caribbean and Hawaiian Islands.

PubMed

Bennett, Chanda E; Wilson, Byron S; Desalle, Rob

2011-02-01

The use of DNA barcodes has been proposed as a promising tool for identifying species. The efficacy of this tool for invasive species requires further exploration. The species status of the small Indian mongoose, an exotic invasive in several parts of the world, has been contentious due to morphological similarity with its congeners in its natural habitat. Although the small Indian mongoose is recognized as Herpestes javanicus, this nomenclature has been used interchangeably with Herpestes auropunctatus. Here, we demonstrate the utility of using DNA barcoding approaches with mtDNA cytochrome b to discriminate between the two species and other sympatric members of the genus Herpestes (Herpestes naso, Herpestes urva, and Herpestes edwardsii). Using the diagnostic DNA positions we obtain, we can identity specimens of nonnative populations of the small Indian mongoose from the Caribbean and Hawaiian Islands to their species of origin. A singe diagnostic site accomplishes the identification of H. javanicus versus H. auropunctatus. Our results indicate that the nonnative mongoose populations from the Caribbean and Hawaiian Islands are H. auropunctatus, and not H. javanicus.

PEGDA hydrogels as a replacement for animal tissues in mucoadhesion testing.

PubMed

Eshel-Green, Tal; Eliyahu, Shaked; Avidan-Shlomovich, Shlomit; Bianco-Peled, Havazelet

2016-06-15

Utilization of animal parts in ex-vivo mucoadhesion assays is a common approach that presents many difficulties due to animal rights issues and large variance between animals. This study examines the suitability of two PEGDA (poly(ethylene glycol) diacrylate) based hydrogels to serve as tissue mimetics for mucoadhesion evaluation. One hydrogel, termed PEGDA-QT, was composed of pentaerythritol tetrakis (3-mercaptopropionate) and PEG and contained free thiol groups mimicking those found in natural mucosa. The other hydrogel was formed by UV (ultraviolet) curing of PEGDA and mimicked the mechanical property of mucosa but not its chemical constitute. When ranking different first generation mucoadhesive polymers using a tensile assay, both hydrogels showed good agreement with the ranking achieved for porcine small intestine. However, only PEGDA-QT and porcine small intestine shared a similar displacement curve. The same ranking for PEGDA-QT and porcine small intestine was also observed when comparing a second-generation mucoadhesive polymer, thiolated alginate, to native alginate. Our findings suggest that PEGDA-QT could serve as a replacement for porcine small intestine in both mucoadhesion evaluations using a tensile machine and the flow-through method for first and second-generation mucoadhesive polymers. Copyright © 2016 Elsevier B.V. All rights reserved.

Optimized 4-bit Quantum Reversible Arithmetic Logic Unit

NASA Astrophysics Data System (ADS)

Ayyoub, Slimani; Achour, Benslama

2017-08-01

Reversible logic has received a great attention in the recent years due to its ability to reduce the power dissipation. The main purposes of designing reversible logic are to decrease quantum cost, depth of the circuits and the number of garbage outputs. The arithmetic logic unit (ALU) is an important part of central processing unit (CPU) as the execution unit. This paper presents a complete design of a new reversible arithmetic logic unit (ALU) that can be part of a programmable reversible computing device such as a quantum computer. The proposed ALU based on a reversible low power control unit and small performance parameters full adder named double Peres gates. The presented ALU can produce the largest number (28) of arithmetic and logic functions and have the smallest number of quantum cost and delay compared with existing designs.

Predicting injection related changes in seismic properties at Kevin Dome, north central Montana, using well logs and laboratory measurements

NASA Astrophysics Data System (ADS)

Saltiel, S.; Bonner, B. P.; Ajo Franklin, J. B.

2014-12-01

Time-lapse seismic monitoring (4D) is currently the primary technique available for tracking sequestered CO2 in a geologic storage reservoir away from monitoring wells. The main seismic responses to injection are those due to direct fluid substitution, changes in differential pressure, and chemical interactions with reservoir rocks; the importance of each depends on reservoir/injection properties and temporal/spatial scales of interest. As part of the Big Sky Carbon Sequestration Partnership, we are monitoring the upcoming large scale (1 million ton+) CO2 injection in Kevin Dome, north central Montana. As part of this research, we predict the relative significance of these three effects, as an aid in design of field surveys. Analysis is undertaken using existing open-hole well log data and cores from wells drilled at producer and injector pads as well as core experiments. For this demonstration site, CO2 will be produced from a natural reservoir and re-injected down dip, where the formation is saturated with brine. Effective medium models based on borehole seismic velocity measurements predict relatively small effects (less than 40 m/s change in V¬p) due to the injection of more compressible supercritical CO2. This is due to the stiff dolomite reservoir rock, with high seismic velocities (Vp~6000 m/s, Vs~3000 m/s) and fairly low porosity (<10%). Assuming pure dolomite mineralogy, these models predict a slight increase in Vp during CO2 injection. This velocity increase is due to the lower density of CO2 relative to brine; which outweighs the small change in modulus compared to the stiff reservoir rock. We present both room pressure and in-situ P/T ultrasonic experiments using core samples obtained from the reservoir; such measurements are undertaken to access the expected seismic velocities under pressurized injection. The reservoir appears to have fairly low permeability. Large-volume injection is expected to produce large local pore pressure increases, which may have the largest immediate effect on seismic velocities. Increasing pore pressure lowers the differential pressure due to confining stress, which decreases seismic velocities by opening cracks. The magnitude of this effect depends both on rock microstructure and fracture at the field scale; core scale measurements will help separate these effects.

22 CFR Appendix A to Part 145 - Clauses for Contracts and Small Purchases Awarded by Recipient

Code of Federal Regulations, 2011 CFR

2011-04-01

.... 145, App. A Appendix A to Part 145—Clauses for Contracts and Small Purchases Awarded by Recipient All contracts and small purchases, awarded by a recipient who is subject to this regulation, shall contain the... 22 Foreign Relations 1 2011-04-01 2011-04-01 false Clauses for Contracts and Small Purchases...

40 CFR Table 4 to Subpart Bbbb of... - Model Rule-Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a

Code of Federal Regulations, 2011 CFR

2011-07-01

... Existing Small Municipal Waste Combustion Unit a 4 Table 4 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a For...

40 CFR Table 2 to Subpart Bbbb of... - Model Rule-Class I Emission Limits for Existing Small Municipal Waste Combustion Units a

Code of Federal Regulations, 2014 CFR

2014-07-01

... Existing Small Municipal Waste Combustion Units a 2 Table 2 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class I Emission Limits for Existing Small Municipal Waste Combustion Units a For...

40 CFR Table 4 to Subpart Bbbb of... - Model Rule-Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a

Code of Federal Regulations, 2014 CFR

2014-07-01

... Existing Small Municipal Waste Combustion Unit a 4 Table 4 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a For...

40 CFR Table 4 to Subpart Bbbb of... - Model Rule-Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a

Code of Federal Regulations, 2010 CFR

2010-07-01

... Existing Small Municipal Waste Combustion Unit a 4 Table 4 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a For...

40 CFR Table 2 to Subpart Bbbb of... - Model Rule-Class I Emission Limits for Existing Small Municipal Waste Combustion Units a

Code of Federal Regulations, 2012 CFR

2012-07-01

... Existing Small Municipal Waste Combustion Units a 2 Table 2 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class I Emission Limits for Existing Small Municipal Waste Combustion Units a For...

40 CFR Table 2 to Subpart Bbbb of... - Model Rule-Class I Emission Limits for Existing Small Municipal Waste Combustion Units a

Code of Federal Regulations, 2013 CFR

2013-07-01

... Existing Small Municipal Waste Combustion Units a 2 Table 2 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class I Emission Limits for Existing Small Municipal Waste Combustion Units a For...

40 CFR Table 2 to Subpart Bbbb of... - Model Rule-Class I Emission Limits for Existing Small Municipal Waste Combustion Units a

Code of Federal Regulations, 2010 CFR

2010-07-01

... Existing Small Municipal Waste Combustion Units a 2 Table 2 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class I Emission Limits for Existing Small Municipal Waste Combustion Units a For...

40 CFR Table 2 to Subpart Bbbb of... - Model Rule-Class I Emission Limits for Existing Small Municipal Waste Combustion Units a

Code of Federal Regulations, 2011 CFR

2011-07-01

... Existing Small Municipal Waste Combustion Units a 2 Table 2 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class I Emission Limits for Existing Small Municipal Waste Combustion Units a For...

40 CFR Table 4 to Subpart Bbbb of... - Model Rule-Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a

Code of Federal Regulations, 2012 CFR

2012-07-01

... Existing Small Municipal Waste Combustion Unit a 4 Table 4 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a For...

40 CFR Table 4 to Subpart Bbbb of... - Model Rule-Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a

Code of Federal Regulations, 2013 CFR

2013-07-01

... Existing Small Municipal Waste Combustion Unit a 4 Table 4 to Subpart BBBB of Part 60 Protection of... NEW STATIONARY SOURCES Emission Guidelines and Compliance Times for Small Municipal Waste Combustion... Part 60—Model Rule—Class II Emission Limits for Existing Small Municipal Waste Combustion Unit a For...

The necessity of repeated assessment of imaging studies contained in medical records in medico-legal opinions.

PubMed

Borowska-Solonynko, A

The paper presents two case reports of living victims, in which imaging studies of the chest conducted at a medical facility were an essential part of the medico-legal opinion. The first case was that of a young male hospitalized due to CT evidence of bilateral rib fractions, who claimed to have been assaulted by police officers. The other case was that of a six week old baby hospitalized due to chest X-ray evidence of right hand side rib fractions. The chest X-ray was performed due to one bruise found on the baby's forehead and two small bruises on the back, which gave rise to suspicions of child abuse. In both cases, expert witnesses in radiology definitively excluded the presence of any fractures. These cases indicate that a new assessment of imaging studies contained in medical records is needed. Expert opinions based solely on the description of imaging studies may result in grave consequences.

Double diffusive conjugate heat transfer: Part III

NASA Astrophysics Data System (ADS)

Soudagar, Manzoor Elahi M.; Azeem

2018-05-01

The placement of a small solid wall towards cold surface of square porous cavity affects the heat transfer behavior of porous region due to restriction of fluid motion in the region occupied by solid wall. An investigation of heat transfer is carried out to understand the fluid flow and heat transfer behavior in porous cavity by solving the governing partial differential equations. Galerkin's approach is used to convert the partial differential equations into algebraic form of equations by applying finite element method. The heat transfer increases for solid towards right surface as compared to the case of solid at center of cavity.

Solid-State Additive Manufacturing for Heat Exchangers

NASA Astrophysics Data System (ADS)

Norfolk, Mark; Johnson, Hilary

2015-03-01

Energy densities in devices are increasing across many industries including power generation, high power electronics, manufacturing, and automotive. Increasingly, there is a need for very high efficiency thermal management devices that can pull heat out of a small area at higher and higher rates. Metal additive manufacturing (AM) technologies have the promise of creating parts with complex internal geometries required for integral thermal management. However, this goal has not been met due to constraints in fusion-based metal 3D printers. This work presents a new strategy for metal AM of heat exchangers using an ultrasonic sheet lamination approach.

Sensitivity analysis of hydrodynamic stability operators

NASA Technical Reports Server (NTRS)

Schmid, Peter J.; Henningson, Dan S.; Khorrami, Mehdi R.; Malik, Mujeeb R.

1992-01-01

The eigenvalue sensitivity for hydrodynamic stability operators is investigated. Classical matrix perturbation techniques as well as the concept of epsilon-pseudoeigenvalues are applied to show that parts of the spectrum are highly sensitive to small perturbations. Applications are drawn from incompressible plane Couette, trailing line vortex flow and compressible Blasius boundary layer flow. Parametric studies indicate a monotonically increasing effect of the Reynolds number on the sensitivity. The phenomenon of eigenvalue sensitivity is due to the non-normality of the operators and their discrete matrix analogs and may be associated with large transient growth of the corresponding initial value problem.

Development and Validation of a Predictive Model to Assess the Impact of Coastal Operations On Urban Scale Air Quality

DTIC Science & Technology

2006-09-29

originating in Los Angeles. The long ridge of ozone in the north east part of Figure 14a is due to polluted air from San Diego area that has undergone...Further north of this small ridge (2 ppbv), we find a decrease in O3 of up to 6ppb (i.e., without DoD emissions, O3 is reduced by 6ppb). This period is...ships on urban air quality. 35 6.0 References Alexis, A., P. Gaffney , C. Garcia, M. Nystrom, and R. Rood (2000), The 1999 California Almanac of

Evaporation enhancement in soils: a critical review

NASA Astrophysics Data System (ADS)

Rutten, Martine; van de Giesen, Nick

2015-04-01

Temperature gradients in the top layer of the soil are, especially during the daytime, steeper than would be expected if thermal conduction was the primary heat transfer mechanism. Evaporation seems to have significant influence on the soil heat budget. Only part of the surface soil heat flux is conducted downwards, increasing the soil temperatures, and part is used for evaporation, acting as a sink to the soil heat budget. For moist soils, the evaporation is limited by the transport of water molecules to the surface. The classical view is that water vapor is transported from the evaporation front to the surface by diffusion. Diffusion is mixing due to the random movement of molecules resulting in flattening concentration gradients. In soil, the diffusive vapor flux and the resulting latent heat flux are generally small. We found that transport enhancement is necessary in order to sustain vapor fluxes that are large enough to sustain latent heat fluxes, as well as being large enough to explain the observed temperature gradients. Enhancement of vapor diffusion is a known phenomenon, subject to debate on the explanations of underlying mechanism. In an extensive literature review on vapor enhancement in soils, the plausibility of various mechanisms was assessed. We reviewed mechanisms based on (combinations of) diffusive, viscous, buoyant, capillary and external pressure forces including: thermodiffusion, dispersion, Stefan's flow, Knudsen diffusion, liquid island effect, hydraulic lift, free convection, double diffusive convection and forced convection. The analysis of the order of magnitude of the mechanisms based on first principles clearly distinguished between plausible and implausible mechanisms. Thermodiffusion, Stefan's flow, Knudsen effects, liquid islands do not significantly contribute to enhanced evaporation. Double diffusive convection seemed unlikely due to lack of experimental evidence, but could not be completely excluded from the list of potential mechanisms. Hydraulic lift, the mechanism that small capillaries lift liquid water to the surface where it evaporates, does significantly contribute to enhanced evaporation from soils, also from dryer soils. The experimental evidence for and the theoretical underpinnings of this mechanism are convincing. However, we sought mechanisms that both explain enhanced evaporation and steep temperature gradients in the soil during the daytime. These often observed gradients consist of a sharp decrease of temperature with a depth up to the depth of the evaporation front. Hydraulic lift cannot explain this because the evaporation front is located at the surface. One remaining mechanism is forced convection due to atmospheric pressure fluctuations, also referred to as wind pumping. Wind pumping causes displacement and flow velocities too small for significant convective and too small for significant dispersive transport, when steady state dispersion formulations are used. However, experiments do indicate significant dispersive transport that can be explained by dispersion under unsteady flow conditions. Forced convection due to pressure fluctuations seems to be the only mechanism that can explain both enhanced evaporation and the steep temperature gradients.

Conservation genetics of managed ungulate populations

USGS Publications Warehouse

Scribner, Kim T.

1993-01-01

Natural populations of many species are increasingly impacted by human activities. Perturbations are particularly pronunced for large ungulates due in part to sport and commercial harvest, to reductions and fragmentation of native habitat, and as the result of reintroductions. These perturbations affect population size, sex and age composition, and population breeding structure, and as a consequence affect the levels and partitioning of genetic variation. Three case histories highlighting long-term ecological genetic research on mule deer Odocoileus hemionus (Rafinesque, 1817), white-tailed deer O. virginianus (Zimmermann, 1780), and Alpine ibex Capra i. ibex Linnaeus, 1758 are presented. Joint examinations of population ecological and genetic data from several populations of each species reveal: (1) that populations are not in genetic equilibrium, but that allele frequencies and heterozygosity change dramatically over time and among cohorts produced in successive years, (2) populations are genetically structured over short and large geographic distances reflecting local breeding structure and patterns of gene flow, respectively; however, this structure is quite dynamic over time, due in part to population exploitation, and (3) restocking programs are often undertaken with small numbers of founding individuals resulting in dramatic declines in levels of genetic variability and increasing levels of genetic differentiation among populations due to genetic drift. Genetic characteristics have and will continue to provide valuable indirect sources of information relating enviromental and human perturbations to changes in population processes.

Magnetic field effect on the electrical resistivity of Y1-xNixBa2Cu3O7-δ superconductor

NASA Astrophysics Data System (ADS)

Hadi-Sichani, Behnaz; Shakeripour, Hamideh; Salamati, Hadi

2018-06-01

The Ni- substituted Y1-xNixBa2Cu3O7-δ high temperature superconducting samples with 0 ≤ x < 0.01 were synthesized by the standard solid-state reaction. The temperature dependent resistivity of the samples was measured under magnetic fields in the range of zero to 1 Tesla, applied perpendicular to the current direction. To study of magnetoresistance is one of the most important ways to investigate the intergranular nature of superconducting materials. The resistive transition is made of two parts. The first- unaffected to applied magnetic field part which is near the onset of superconductivity. This region is due to superconductivity in grains. The second- broaden tail part which is due to the connectivity of the grains. At temperatures close to Tc 0, (ρ = 0), under applied magnetic fields, weak links are affected and the vortices are penetrated and move inside the intergranular and then the tail part is broaden. This broadening part observed in the electrical resistivity, ρ(T), and in the derivative of the electrical resistivity, dρ/dT, becomes too small or even absent in Ni doped samples. For pure sample, Tc 0 was around 90 K; by applying a magnetic field H = 0.3 T it shifted to 40 K. This broadening is 91.4 K to 80 K for x = 0.002 and 91.7 K to 85 K for x = 0.004 samples. We found an optimal value of Ni doping concentration which improves the coupling of the grains. Then, vortices get strongly pinned. These observations suggest that the Ni substitution can reduce the weak links and increase the Jc values of these superconductors.

Photometric Periodicities of Be/X-Ray Pulsars in the Small Magellanic Cloud

NASA Astrophysics Data System (ADS)

Schmidtke, P. C.; Cowley, A. P.

2005-11-01

Analysis of the long-term photometric variability of seven Be/X-ray pulsar systems in the Small Magellanic Cloud has been carried out. We find that a variety of types of variability are present, including long-term irregular changes, periodic orbital outbursts due to interaction between the stars (weeks to months), low-amplitude quasi-periodic variations of the equatorial disk (days), and nonradial pulsations of the Be primary star (hours). This paper utilizes public domain data obtained by the MACHO Project, jointly funded by the US Department of Energy through the University of California, Lawrence Livermore National Laboratory, under contract W-7405-Eng-48, by the National Science Foundation through the Center for Particle Astrophysics of the University of California under cooperative agreement AST 88-09616, and by the Mount Stromlo and Siding Spring Observatory, part of the Australian National University.

Intrinsic Fabry-Perot optical fiber sensors and their multiplexing

DOEpatents

Wang, Anbo

2007-12-11

An intrinsic Fabry-Perot optical sensor includes a thin film sandwiched between two fiber ends. When light is launched into the fiber, two reflections are generated at the two fiber/thin film interfaces due to a difference in refractive indices between the fibers and the film, giving rise to the sensor output. In another embodiment, a portion of the cladding of a fiber is removed, creating two parallel surfaces. Part of the evanescent fields of light propagating in the fiber is reflected at each of the surfaces, giving rise to the sensor output. In a third embodiment, the refractive index of a small portion of a fiber is changed through exposure to a laser beam or other radiation. Interference between reflections at the ends of the small portion give rise to the sensor output. Multiple sensors along a single fiber are multiplexed using an optical time domain reflectometry method.

Identification of novel anelloviruses with broad diversity in UK rodents

PubMed Central

Nishiyama, Shoko; Dutia, Bernadette M.; Stewart, James P.; Meredith, Anna L.; Shaw, Darren J.; Simmonds, Peter

2014-01-01

Anelloviruses are a family of small circular ssDNA viruses with a vast genetic diversity. Human infections with the prototype anellovirus, torque teno virus (TTV), are ubiquitous and related viruses have been described in a number of other mammalian hosts. Despite over 15 years of investigation, there is still little known about the pathogenesis and possible disease associations of anellovirus infections, arising in part due to the lack of a robust cell culture system for viral replication or tractable small-animal model. We report the identification of diverse anelloviruses in several species of wild rodents. The viruses are highly prevalent in wood mice (Apodemus sylvaticus) and field voles (Microtus agrestis), detectable at a low frequency in bank voles (Myodes glareolus), but absent from house mice (Mus musculus). The viruses identified have a genomic organization consistent with other anelloviruses, but form two clear phylogenetic groups that are as distinct from each other as from defined genera. PMID:24744300

Agnosia for Mirror Stimuli: A New Case Report with a Small Parietal Lesion

PubMed Central

Martinaud, Olivier; Mirlink, Nicolas; Bioux, Sandrine; Bliaux, Evangéline; Lebas, Axel; Gerardin, Emmanuel; Hannequin, Didier

2014-01-01

Only seven cases of agnosia for mirror stimuli have been reported, always with an extensive lesion. We report a new case of an agnosia for mirror stimuli due to a circumscribed lesion. An extensive battery of neuropsychological tests and a new experimental procedure to assess visual object mirror and orientation discrimination were assessed 10 days after the onset of clinical symptoms, and 5 years later. The performances of our patient were compared with those of four healthy control subjects matched for age. This test revealed an agnosia for mirror stimuli. Brain imaging showed a small right occipitoparietal hematoma, encompassing the extrastriate cortex adjoining the inferior parietal lobe. This new case suggests that: (i) agnosia for mirror stimuli can persist for 5 years after onset and (ii) the posterior part of the right intraparietal sulcus could be critical in the cognitive process of mirror stimuli discrimination. PMID:25037846

RACORO Extended-Term Aircraft Observations of Boundary-Layer Clouds

NASA Technical Reports Server (NTRS)

Vogelmann, Andrew M.; McFarquhar, Greg M.; Ogren, John A.; Turner, David D.; Comstock, Jennifer M.; Feingold, Graham; Long, Charles N.; Jonsson, Haflidi H.; Bucholtz, Anthony; Collins, Don R.;

Genetics of attention deficit hyperactivity disorder.

PubMed

Faraone, Stephen V; Larsson, Henrik

2018-06-11

Decades of research show that genes play an vital role in the etiology of attention deficit hyperactivity disorder (ADHD) and its comorbidity with other disorders. Family, twin, and adoption studies show that ADHD runs in families. ADHD's high heritability of 74% motivated the search for ADHD susceptibility genes. Genetic linkage studies show that the effects of DNA risk variants on ADHD must, individually, be very small. Genome-wide association studies (GWAS) have implicated several genetic loci at the genome-wide level of statistical significance. These studies also show that about a third of ADHD's heritability is due to a polygenic component comprising many common variants each having small effects. From studies of copy number variants we have also learned that the rare insertions or deletions account for part of ADHD's heritability. These findings have implicated new biological pathways that may eventually have implications for treatment development.

Design and Control of Small Neutral Beam Arc Chamber for Investigations of DIII-D Neutral Beam Failure During Helium Operation

NASA Astrophysics Data System (ADS)

Fremlin, Carl; Beckers, Jasper; Crowley, Brendan; Rauch, Joseph; Scoville, Jim

2017-10-01

The Neutral Beam system on the DIII-D tokamak consists of eight ion sources using the Common Long Pulse Source (CLPS) design. During helium operation, desired for research regarding the ITER pre-nuclear phase, it has been observed that the ion source arc chamber performance steadily deteriorates, eventually failing due to electrical breakdown of the insulation. A significant investment of manpower and time is required for repairs. To study the cause of failure a small analogue of the DIII-D neutral beam arc chamber has been constructed. This poster presents the design and analysis of the arc chamber including the PLC based operational control system for the experiment, analysis of the magnetic confinement and details of the diagnostic suite. Work supported in part by US DoE under the Science Undergraduate Laboratory Internship (SULI) program and under DE-FC02-04ER54698.

Generation of Plasma Density Irregularities in the Midlatitude/Subauroral F Region

NASA Astrophysics Data System (ADS)

Mishin, E. V.

2017-12-01

A concise review is given of the current state of the theoretical understanding of the creation of small- and meso-scale plasma density irregularities in the midlatitude/subauroral F region during quiet and disturbed periods. The former are discussed in terms of the temperature gradient instability (TGI) in the vicinity of the ionospheric projection of the plasmapause and the Perkins instability. During active conditions some part of the midlatitude ionosphere becomes the subauroral region dominated by enhanced westward flows (SAPS and SAID) driven by poleward electric fields. Their irregular, often nonlinear wave structure leads to the formation of plasma density irregularities in the plasmasphere and conjugate ionosphere. Here, meso-scale irregularities are due to the positive feedback magnetosphere-ionosphere coupling instability, while small scales resulted from the gradient drift instability (GDI), temperature GDI, and the ion frictional heating instability. The theoretical predictions are compared with satellite observations in the perturbed subauroral geospace.

EXTRACTING PLANET MASS AND ECCENTRICITY FROM TTV DATA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lithwick, Yoram; Xie Jiwei; Wu Yanqin

2012-12-20

Most planet pairs in the Kepler data that have measured transit time variations (TTVs) are near first-order mean-motion resonances. We derive analytical formulae for their TTV signals. We separate planet eccentricity into free and forced parts, where the forced part is purely due to the planets' proximity to resonance. This separation yields simple analytical formulae. The phase of the TTV depends sensitively on the presence of free eccentricity: if the free eccentricity vanishes, the TTV will be in phase with the longitude of conjunctions. This effect is easily detectable in current TTV data. The amplitude of the TTV depends onmore » planet mass and free eccentricity, and it determines planet mass uniquely only when the free eccentricity is sufficiently small. We analyze the TTV signals of six short-period Kepler pairs. We find that three of these pairs (Kepler 18, 24, 25) have a TTV phase consistent with zero. The other three (Kepler 23, 28, 32) have small TTV phases, but ones that are distinctly non-zero. We deduce that the free eccentricities of the planets are small, {approx}< 0.01, but not always vanishing. Furthermore, as a consequence of this, we deduce that the true masses of the planets are fairly accurately determined by the TTV amplitudes, within a factor of {approx}< 2. The smallness of the free eccentricities suggests that the planets have experienced substantial dissipation. This is consistent with the hypothesis that the observed pile-up of Kepler pairs near mean-motion resonances is caused by resonant repulsion. But the fact that some of the planets have non-vanishing free eccentricity suggests that after resonant repulsion occurred there was a subsequent phase in the planets' evolution when their eccentricities were modestly excited, perhaps by interplanetary interactions.« less

Modeling the effects of small turbulent scales on the drag force for particles below and above the Kolmogorov scale

NASA Astrophysics Data System (ADS)

Gorokhovski, Mikhael; Zamansky, Rémi

2018-03-01

Consistently with observations from recent experiments and DNS, we focus on the effects of strong velocity increments at small spatial scales for the simulation of the drag force on particles in high Reynolds number flows. In this paper, we decompose the instantaneous particle acceleration in its systematic and residual parts. The first part is given by the steady-drag force obtained from the large-scale energy-containing motions, explicitly resolved by the simulation, while the second denotes the random contribution due to small unresolved turbulent scales. This is in contrast with standard drag models in which the turbulent microstructures advected by the large-scale eddies are deemed to be filtered by the particle inertia. In our paper, the residual term is introduced as the particle acceleration conditionally averaged on the instantaneous dissipation rate along the particle path. The latter is modeled from a log-normal stochastic process with locally defined parameters obtained from the resolved field. The residual term is supplemented by an orientation model which is given by a random walk on the unit sphere. We propose specific models for particles with diameter smaller and larger size than the Kolmogorov scale. In the case of the small particles, the model is assessed by comparison with direct numerical simulation (DNS). Results showed that by introducing this modeling, the particle acceleration statistics from DNS is predicted fairly well, in contrast with the standard LES approach. For the particles bigger than the Kolmogorov scale, we propose a fluctuating particle response time, based on an eddy viscosity estimated at the particle scale. This model gives stretched tails of the particle acceleration distribution and dependence of its variance consistent with experiments.

Optimum coding techniques for MST radars

NASA Technical Reports Server (NTRS)

Sulzer, M. P.; Woodman, R. F.

1986-01-01

The optimum coding technique for MST (mesosphere stratosphere troposphere) radars is that which gives the lowest possible sidelobes in practice and can be implemented without too much computing power. Coding techniques are described in Farley (1985). A technique mentioned briefly there but not fully developed and not in general use is discussed here. This is decoding by means of a filter which is not matched to the transmitted waveform, in order to reduce sidelobes below the level obtained with a matched filter. This is the first part of the technique discussed here; the second part consists of measuring the transmitted waveform and using it as the basis for the decoding filter, thus reducing errors due to imperfections in the transmitter. There are two limitations to this technique. The first is a small loss in signal to noise ratio (SNR), which usually is not significant. The second problem is related to incomplete information received at the lowest ranges. An appendix shows a technique for handling this problem. Finally, it is shown that the use of complementary codes on transmission and nonmatched decoding gives the lowest possible sidelobe level and the minimum loss in SNR due to mismatch.

14 CFR 21.27 - Issue of type certificate: surplus aircraft of the Armed Forces.

Code of Federal Regulations, 2012 CFR

2012-01-01

... that apply 1 Small reciprocating-engine powered airplanes Before May 16, 1956After May 15, 1956 CAR Part 3, as effective May 15, 1956.CAR Part 3, or 14 CFR Part 23. Small turbine engine-powered airplanes...-engine powered airplanes Before Aug. 26, 1955After Aug. 25, 1955 CAR Part 4b, as effective Aug. 25, 1955...

14 CFR 21.27 - Issue of type certificate: surplus aircraft of the Armed Forces.

Code of Federal Regulations, 2013 CFR

2013-01-01

... that apply 1 Small reciprocating-engine powered airplanes Before May 16, 1956After May 15, 1956 CAR Part 3, as effective May 15, 1956.CAR Part 3, or 14 CFR Part 23. Small turbine engine-powered airplanes...-engine powered airplanes Before Aug. 26, 1955After Aug. 25, 1955 CAR Part 4b, as effective Aug. 25, 1955...

14 CFR 21.27 - Issue of type certificate: surplus aircraft of the Armed Forces.

Code of Federal Regulations, 2014 CFR

2014-01-01

... that apply 1 Small reciprocating-engine powered airplanes Before May 16, 1956After May 15, 1956 CAR Part 3, as effective May 15, 1956.CAR Part 3, or 14 CFR Part 23. Small turbine engine-powered airplanes...-engine powered airplanes Before Aug. 26, 1955After Aug. 25, 1955 CAR Part 4b, as effective Aug. 25, 1955...

Facilitating Personal Transformations in Small Groups: Part I.

ERIC Educational Resources Information Center

Boyd, Robert D.

1989-01-01

Describes personal transformation in small groups method that employs Matrix Model as its operational structure in Part I of two-part article. Describes method's reliance on metaphors and nature and manner in which they are employed. Defines personal transformation within framework of analytical psychology. (Author/CM)

21 CFR 60.44 - Hearing procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... RESTORATION Due Diligence Hearings § 60.44 Hearing procedures. The due diligence hearing shall be conducted in accordance with this part, supplemented by the nonconflicting procedures in part 16. During the due diligence... requesting a hearing under part 16. The standard of due diligence set forth in § 60.36 will apply in the due...

On the use of infrasound for constraining global climate models

NASA Astrophysics Data System (ADS)

Millet, Christophe; Ribstein, Bruno; Lott, Francois; Cugnet, David

2017-11-01

Numerical prediction of infrasound is a complex issue due to constantly changing atmospheric conditions and to the random nature of small-scale flows. Although part of the upward propagating wave is refracted at stratospheric levels, where gravity waves significantly affect the temperature and the wind, yet the process by which the gravity wave field changes the infrasound arrivals remains poorly understood. In the present work, we use a stochastic parameterization to represent the subgrid scale gravity wave field from the atmospheric specifications provided by the European Centre for Medium-Range Weather Forecasts. It is shown that regardless of whether the gravity wave field possesses relatively small or large features, the sensitivity of acoustic waveforms to atmospheric disturbances can be extremely different. Using infrasound signals recorded during campaigns of ammunition destruction explosions, a new set of tunable parameters is proposed which more accurately predicts the small-scale content of gravity wave fields in the middle atmosphere. Climate simulations are performed using the updated parameterization. Numerical results demonstrate that a network of ground-based infrasound stations is a promising technology for dynamically tuning the gravity wave parameterization.

Probing a 2-Aminobenzimidazole Library for Binding to RNA Internal Loops via Two-Dimensional Combinatorial Screening

PubMed Central

Velegapudi, Sai Pradeep; Pushechnikov, Alexei; Labuda, Lucas P.; French, Jonathan M.; Disney, Matthew D.

2012-01-01

There are many potential RNA drug targets in bacterial, viral, and the human transcriptomes. However, there are few small molecules that modulate RNA function. This is due, in part, to a lack of fundamental understanding about RNA-ligand interactions including the types of small molecules that bind to RNA structural elements and the RNA structural elements that bind to small molecules. In an effort to better understand RNA-ligand interactions, we diversified the 2-aminobenzimidazole core (2AB) and probed the resulting library for binding to a library of RNA internal loops. We chose the 2AB core for these studies because it is a privileged scaffold for binding RNA based on previous reports. These studies identified that N-methyl pyrrolidine, imidazole, and propylamine diversity elements at the R1 position increase binding to internal loops; variability at the R2 position is well tolerated. The preferred RNA loop space was also determined for five ligands using a statistical approach and identified trends that lead to selective recognition. PMID:22958065

Effect of acetylcysteine on adaptation of intestinal smooth muscle after small bowel bypass

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weisbrodt, N.W.; Belloso, R.M.; Biskin, L.C.

1986-03-05

The authors have postulated that the adaptive changes in function and structure of bypassed segments of small bowel are due in part to the change in intestinal contents following operation. The purpose of these experiments was to determine if a mucolytic agent could alter the adaptation. Rats were anesthetized and a 70% jejunoileal bypass was performed. The bypassed segments then were perfused with either saline or acetylcysteine for 3-12 days. Then, either intestinal transit was determined using Cr-51, or segments were taken for morphometric analysis. Transit, as assessed by the geometric center, was increased 32% by acetylcysteine treatment. Treatment alsomore » caused a decrease in hypertrophy of the muscularis. Muscle wet weight, muscle cross-sectional area, and muscle layer thickness all were significantly less in those animals infused with acetyl-cysteine. No decreases in hypertrophy were seen in the in-continuity segments. These data indicate that alterations in intestinal content can affect the course of adaptation of intestinal muscle in response to small bowel bypass.« less

You can count on the motor cortex: Finger counting habits modulate motor cortex activation evoked by numbers

PubMed Central

Tschentscher, Nadja; Hauk, Olaf; Fischer, Martin H.; Pulvermüller, Friedemann

2012-01-01

The embodied cognition framework suggests that neural systems for perception and action are engaged during higher cognitive processes. In an event-related fMRI study, we tested this claim for the abstract domain of numerical symbol processing: is the human cortical motor system part of the representation of numbers, and is organization of numerical knowledge influenced by individual finger counting habits? Developmental studies suggest a link between numerals and finger counting habits due to the acquisition of numerical skills through finger counting in childhood. In the present study, digits 1 to 9 and the corresponding number words were presented visually to adults with different finger counting habits, i.e. left- and right-starters who reported that they usually start counting small numbers with their left and right hand, respectively. Despite the absence of overt hand movements, the hemisphere contralateral to the hand used for counting small numbers was activated when small numbers were presented. The correspondence between finger counting habits and hemispheric motor activation is consistent with an intrinsic functional link between finger counting and number processing. PMID:22133748

Conserved Lipid and Small-Molecule Modulation of COQ8 Reveals Regulation of the Ancient Kinase-like UbiB Family.

PubMed

Reidenbach, Andrew G; Kemmerer, Zachary A; Aydin, Deniz; Jochem, Adam; McDevitt, Molly T; Hutchins, Paul D; Stark, Jaime L; Stefely, Jonathan A; Reddy, Thiru; Hebert, Alex S; Wilkerson, Emily M; Johnson, Isabel E; Bingman, Craig A; Markley, John L; Coon, Joshua J; Dal Peraro, Matteo; Pagliarini, David J

2018-02-15

Human COQ8A (ADCK3) and Saccharomyces cerevisiae Coq8p (collectively COQ8) are UbiB family proteins essential for mitochondrial coenzyme Q (CoQ) biosynthesis. However, the biochemical activity of COQ8 and its direct role in CoQ production remain unclear, in part due to lack of known endogenous regulators of COQ8 function and of effective small molecules for probing its activity in vivo. Here, we demonstrate that COQ8 possesses evolutionarily conserved ATPase activity that is activated by binding to membranes containing cardiolipin and by phenolic compounds that resemble CoQ pathway intermediates. We further create an analog-sensitive version of Coq8p and reveal that acute chemical inhibition of its endogenous activity in yeast is sufficient to cause respiratory deficiency concomitant with CoQ depletion. Collectively, this work defines lipid and small-molecule modulators of an ancient family of atypical kinase-like proteins and establishes a chemical genetic system for further exploring the mechanistic role of COQ8 in CoQ biosynthesis. Copyright © 2017 Elsevier Ltd. All rights reserved.

Separating the effects of internal friction and transition state energy to explain the slow, frustrated folding of spectrin domains

PubMed Central

Wensley, Beth G.; Kwa, Lee Gyan; Shammas, Sarah L.; Rogers, Joseph M.; Browning, Stuart; Yang, Ziqi; Clarke, Jane

2012-01-01

The elongated three-helix bundle domains spectrin R16 and R17 fold some two to three orders of magnitude more slowly than their homologue R15. We have shown that this slow folding is due, at least in part, to roughness in the free-energy landscape of R16 and R17. We have proposed that this roughness is due to a frustrated search for the correct docking of partly preformed helices. However, this accounts for only a small part of the slowing of folding and unfolding. Five residues on the A helix of R15, when inserted together into R16 or R17, increase the folding rate constants, reduce landscape roughness, and alter the folding mechanism to one resembling R15. The effect of each of these mutations individually is investigated here. No one mutation causes the behavior seen for the five in combination. However, two mutations, E18F and K25V, significantly increase the folding and unfolding rates of both R16 and R17 but without a concomitant loss in landscape roughness. E18F has the greatest effect on the kinetics, and a Φ-value analysis of the C helix reveals that the folding mechanism is unchanged. For both E18F and K25V the removal of the charge and resultant transition state stabilization is the main origin of the faster folding. Consequently, the major cause of the unusually slow folding of R16 and R17 is the non-native burial of the two charged residues in the transition state. The slowing due to landscape roughness is only about fivefold. PMID:22711800

Separating the effects of internal friction and transition state energy to explain the slow, frustrated folding of spectrin domains.

PubMed

Wensley, Beth G; Kwa, Lee Gyan; Shammas, Sarah L; Rogers, Joseph M; Browning, Stuart; Yang, Ziqi; Clarke, Jane

2012-10-30

The elongated three-helix bundle domains spectrin R16 and R17 fold some two to three orders of magnitude more slowly than their homologue R15. We have shown that this slow folding is due, at least in part, to roughness in the free-energy landscape of R16 and R17. We have proposed that this roughness is due to a frustrated search for the correct docking of partly preformed helices. However, this accounts for only a small part of the slowing of folding and unfolding. Five residues on the A helix of R15, when inserted together into R16 or R17, increase the folding rate constants, reduce landscape roughness, and alter the folding mechanism to one resembling R15. The effect of each of these mutations individually is investigated here. No one mutation causes the behavior seen for the five in combination. However, two mutations, E18F and K25V, significantly increase the folding and unfolding rates of both R16 and R17 but without a concomitant loss in landscape roughness. E18F has the greatest effect on the kinetics, and a Φ-value analysis of the C helix reveals that the folding mechanism is unchanged. For both E18F and K25V the removal of the charge and resultant transition state stabilization is the main origin of the faster folding. Consequently, the major cause of the unusually slow folding of R16 and R17 is the non-native burial of the two charged residues in the transition state. The slowing due to landscape roughness is only about fivefold.

Paramagnetic alignment of small grains: A novel method for measuring interstellar magnetic fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoang, Thiem; Martin, P. G.; Lazarian, A.

2014-07-20

We present a novel method to measure the strength of interstellar magnetic fields using ultraviolet (UV) polarization of starlight that is in part produced by weakly aligned, small dust grains. We begin with calculating the degrees of the paramagnetic alignment of small (size a ∼ 0.01 μm) and very small (a ∼ 0.001 μm) grains in the interstellar magnetic field due to the Davis-Greenstein relaxation and resonance relaxation. To calculate the degrees of paramagnetic alignment, we use Langevin equations and take into account various interaction processes essential for the rotational dynamics of small grains. We find that the alignment ofmore » small grains is necessary to reproduce the observed polarization in the UV, although the polarization arising from these small grains is negligible at the optical and infrared (IR) wavelengths. Based on fitting theoretical models to observed extinction and polarization curves, we find that the best-fit model for the case with the peak wavelength of polarization λ{sub max} < 0.55 μm requires a higher degree of alignment of small grains than for the typical case with λ{sub max} = 0.55 μm. We interpret the correlation between the systematic increase of the UV polarization relative to maximum polarization (i.e., of p(6 μm{sup –1})/p{sub max}) with λ{sub max}{sup −1} for cases of low λ{sub max} by appealing to the higher degree of alignment of small grains. We utilize the correlation of the paramagnetic alignment of small grains with the magnetic field strength B to suggest a new way to measure B using the observable parameters λ{sub max} and p(6 μm{sup –1})/p{sub max}.« less

Small bowel capsule endoscopy in 2007: Indications, risks and limitations

PubMed Central

Rondonotti, Emanuele; Villa, Federica; Mulder, Chris JJ; Jacobs, Maarten AJM; de Franchis, Roberto

2007-01-01

Capsule endoscopy has revoluzionized the study of the small bowel by providing a reliable method to evaluate, endoscopically, the entire small bowel. In the last six years several papers have been published exploring the possible role of this examination in different clinical conditions. At the present time capsule endoscopy is generally recommended as a third examination, after negative bidirectional endoscopy, in patients with obscure gastrointestinal bleeding. A growing body of evidence suggests also an important role for this examination in other clinical conditions such as Crohn’s disease, celiac disease, small bowel polyposis syndromes or small bowel tumors. The main complication of this examination is the retention of the device at the site of a previously unknown small bowel stricture. However there are also some other open issues mainly due to technical limitations of this tool (which is not driven from remote control, is unable to take biopsies, to insufflate air, to suck fluids or debris and sometimes to correctly size and locate lesions).The recently developed double balloon enteroscope, owing to its capability to explore a large part of the small bowel and to take targeted biopsies, although being invasive and time consuming, can overcome some limitations of capsule endoscopy. At the present time, in the majority of clinical conditions (i.e. obscure GI bleeding), the winning strategy seems to be to couple these two techniques to explore the small bowel in a painless, safe and complete way (with capsule endoscopy) and to define and treat the lesions identified (with double balloon enteroscopy). PMID:18069752

Acute cholangitis due to afferent loop syndrome after a Whipple procedure: a case report.

PubMed

Spiliotis, John; Karnabatidis, Demetrios; Vaxevanidou, Archodoula; Datsis, Anastasios C; Rogdakis, Athanasios; Zacharis, Georgios; Siamblis, Demetrios

2009-08-25

Patients with resection of stomach and especially with Billroth II reconstruction (gastro jejunal anastomosis), are more likely to develop afferent loop syndrome which is a rare complication. When the afferent part is obstructed, biliary and pancreatic secretions accumulate and cause the distention of this part. In the case of a complete obstruction (rare), there is a high risk developing necrosis and perforation. This complication has been reported once in the literature. A 54-year-old Greek male had undergone a pancreato-duodenectomy (Whipple procedure) one year earlier due to a pancreatic adenocarcinoma. Approximately 10 months after the initial operation, the patient started having episodes of cholangitis (fever, jaundice) and abdominal pain. This condition progressively worsened and the suspicion of local recurrence or stenosis of the biliary-jejunal anastomosis was discussed. A few days before his admission the patient developed signs of septic cholangitis. Our case demonstrates a rare complication with serious clinical manifestation of the afferent loop syndrome. This advanced form of afferent loop syndrome led to the development of huge enterobiliary reflux, which had a serious clinical manifestation as cholangitis and systemic sepsis, due to bacterial overgrowth, which usually present in the afferent loop. The diagnosis is difficult and the interventional radiology gives all the details to support the therapeutic decision making. A variety of factors can contribute to its development including adhesions, kinking and angulation of the loop, stenosis of gastro-jejunal anastomosis and internal herniation. In order to decompress the afferent loop dilatation due to adhesions, a lateral-lateral jejunal anastomosis was performed between the afferent loop and a small bowel loop.

13 CFR 127.100 - What is the purpose of this part?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What is the purpose of this part? 127.100 Section 127.100 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION WOMEN-OWNED SMALL... Federal contracting opportunities for women-owned small businesses (WOSBs) and to assist agencies in...

Current concepts review: Fractures of the patella

PubMed Central

Gwinner, Clemens; Märdian, Sven; Schwabe, Philipp; Schaser, Klaus-D.; Krapohl, Björn Dirk; Jung, Tobias M.

2016-01-01

Fractures of the patella account for about 1% of all skeletal injuries and can lead to profound impairment due to its crucial function in the extensor mechanism of the knee. Diagnosis is based on the injury mechanism, physical examination and radiological findings. While the clinical diagnosis is often distinct, there are numerous treatment options available. The type of treatment as well as the optimum timing of surgical intervention depends on the underlying fracture type, the associated soft tissue damage, patient factors (i.e. age, bone quality, activity level and compliance) and the stability of the extensor mechanism. Regardless of the treatment method an early rehabilitation is recommended in order to avoid contractures of the knee joint capsule and cartilage degeneration. For non-displaced and dislocated non-comminuted transverse patellar fractures (2-part) modified anterior tension band wiring is the treatment of choice and can be combined – due to its biomechanical superiority – with cannulated screw fixation. In severe comminuted fractures, open reduction and fixation with small fragment screws or new angular stable plates for anatomic restoration of the retropatellar surface and extension mechanism results in best outcome. Additional circular cerclage wiring using either typical metal cerclage wires or resorbable PDS/non-resorbable FiberWires increases fixation stability and decreases risk for re-dislocation. Distal avulsion fractures should be fixed with small fragment screws and should be protected by a transtibial McLaughlin cerclage. Partial or complete patellectomy should be regarded only as a very rare salvage operation due to its severe functional impairment. PMID:26816667

Female voice communications in high level aircraft cockpit noises--part II: vocoder and automatic speech recognition systems.

PubMed

Nixon, C; Anderson, T; Morris, L; McCavitt, A; McKinley, R; Yeager, D; McDaniel, M

1998-11-01

The intelligibility of female and male speech is equivalent under most ordinary living conditions. However, due to small differences between their acoustic speech signals, called speech spectra, one can be more or less intelligible than the other in certain situations such as high levels of noise. Anecdotal information, supported by some empirical observations, suggests that some of the high intensity noise spectra of military aircraft cockpits may degrade the intelligibility of female speech more than that of male speech. In an applied research study, the intelligibility of female and male speech was measured in several high level aircraft cockpit noise conditions experienced in military aviation. In Part I, (Nixon CW, et al. Aviat Space Environ Med 1998; 69:675-83) female speech intelligibility measured in the spectra and levels of aircraft cockpit noises and with noise-canceling microphones was lower than that of the male speech in all conditions. However, the differences were small and only those at some of the highest noise levels were significant. Although speech intelligibility of both genders was acceptable during normal cruise noises, improvements are required in most of the highest levels of noise created during maximum aircraft operating conditions. These results are discussed in a Part I technical report. This Part II report examines the intelligibility in the same aircraft cockpit noises of vocoded female and male speech and the accuracy with which female and male speech in some of the cockpit noises were understood by automatic speech recognition systems. The intelligibility of vocoded female speech was generally the same as that of vocoded male speech. No significant differences were measured between the recognition accuracy of male and female speech by the automatic speech recognition systems. The intelligibility of female and male speech was equivalent for these conditions.

Diversity and use of ethno-medicinal plants in the region of Swat, North Pakistan

PubMed Central

2013-01-01

Background Due to its diverse geographical and habitat conditions, northern Pakistan harbors a wealth of medicinal plants. The plants and their traditional use are part of the natural and cultural heritage of the region. This study was carried out to document which medicinal plant species and which plant parts are used in the region of Swat, which syndrome categories are particularly concerned, and which habitat spectrum is frequented by collectors. Finally, we assessed to which extent medicinal plants are vulnerable due to collection and habitat destruction. Methods An ethnobotanical survey was undertaken in the Miandam area of Swat, North Pakistan. Data were collected through field assessment as well as from traditional healers and locals by means of personal interviews and semi-structured questionnaires. Results A total of 106 ethno-medicinal plant species belonging to 54 plant families were recorded. The most common growth forms were perennial (43%) and short-lived herbs (23%), shrubs (16%), and trees (15%). Most frequently used plant parts were leaves (24%), fruits (18%) and subterranean parts (15%). A considerable proportion of the ethno-medicinal plant species and remedies concerns gastro-intestinal disorders. The remedies were mostly prepared in the form of decoction or powder and were mainly taken orally. Eighty out of 106 ethno-medicinal plants were indigenous. Almost 50% of the plants occurred in synanthropic vegetation while slightly more than 50% were found in semi-natural, though extensively grazed, woodland and grassland vegetation. Three species (Aconitum violaceum, Colchicum luteum, Jasminum humile) must be considered vulnerable due to excessive collection. Woodlands are the main source for non-synanthropic indigenous medicinal plants. The latter include many range-restricted taxa and plants of which rhizomes and other subterranean parts are dug out for further processing as medicine. Conclusion Medicinal plants are still widely used for treatment in the area of Swat. Some species of woodlands seem to be adapted to wood-pasture, but vulnerable to overcollecting, and in particular to deforestation. It is suggested to implement local small-scaled agroforestry systems to cultivate vulnerable and commercially valuable ethno-medicinal woodland plants under local self-government responsibility. PMID:23587127

Environmental determinants of celeration behaviour.

PubMed

af Wåhlberg, Anders E

2015-01-01

Celeration (speed change) behaviour of drivers has been posited to be the best predictor of their traffic accident involvement. The origins of this behaviour, however, have not been specified. A model is therefore introduced, where celeration is partly due to the individual disposition of the driver (i.e., driving style), and partly to the environment (road layout, rules and traffic density). Three measurement problems for celeration were studied; the effect of traffic density, of regular versus irregular routes, and weight of the vehicle (loaded/unloaded) on celeration behaviour. Two small samples of truck drivers in Sweden were measured for several months each. There was a strong effect of vehicle load, with behaviour being more cautious with increased weight. Driving on different roads also yielded differences in behaviour, although the design used did not permit conclusions about what caused these. Traffic volume was not found to have any reliable effect on celeration.

Top-down visual search in Wimmelbild

NASA Astrophysics Data System (ADS)

Bergbauer, Julia; Tari, Sibel

2013-03-01

Wimmelbild which means "teeming figure picture" is a popular genre of visual puzzles. Abundant masses of small figures are brought together in complex arrangements to make one scene in a Wimmelbild. It is picture hunt game. We discuss what type of computations/processes could possibly underlie the solution of the discovery of figures that are hidden due to a distractive influence of the context. One thing for sure is that the processes are unlikely to be purely bottom-up. One possibility is to re-arrange parts and see what happens. As this idea is linked to creativity, there are abundant examples of unconventional part re-organization in modern art. A second possibility is to define what to look for. That is to formulate the search as a top-down process. We address top-down visual search in Wimmelbild with the help of diffuse distance and curvature coding fields.

Significance of fibrotic bands in utero--Amniotic band sequence with limb body wall complex: A rare case of fetal autopsy.

PubMed

Devi, P Lekshmi; Cicy, P J; Thambi, Renu; Poothiode, Usha

2015-01-01

Amniotic band sequence (ABS) includes a wide spectrum of abnormalities resulting from entrapment of various fetal parts from a disrupted amnion, ranging from a mere constriction ring affecting a finger to a fatal form called limb body wall complex (LBWC). Reported cases of ABS with LBWC are very few. The spectrum of anomalies depends on which part gets entrapped and at what point of gestation. Hence, the clinical presentation can be extremely variable. Early detection of such cases using sonology is really challenging due to the small size of the fibrotic bands. Here, we present a case of amniotic band syndrome with LBWC in a fetus at 24 weeks of gestation, which was referred for an autopsy. The fetus also showed scoliosis, gastroschisis, lumbosacral meningocele, congenital talipes equinovarus, and cleft palate, thus having features of placenta cranial and placenta abdominal phenotype which is very rare.

New type of microengine using internal combustion of hydrogen and oxygen

NASA Astrophysics Data System (ADS)

Svetovoy, Vitaly B.; Sanders, Remco G. P.; Ma, Kechun; Elwenspoek, Miko C.

2014-03-01

Microsystems become part of everyday life but their application is restricted by lack of strong and fast motors (actuators) converting energy into motion. For example, widespread internal combustion engines cannot be scaled down because combustion reactions are quenched in a small space. Here we present an actuator with the dimensions 100 × 100 × 5 μm3 that is using internal combustion of hydrogen and oxygen as part of its working cycle. Water electrolysis driven by short voltage pulses creates an extra pressure of 0.5-4 bar for a time of 100-400 μs in a chamber closed by a flexible membrane. When the pulses are switched off this pressure is released even faster allowing production of mechanical work in short cycles. We provide arguments that this unexpectedly fast pressure decrease is due to spontaneous combustion of the gases in the chamber. This actuator is the first step to truly microscopic combustion engines.

Wetlands issue stalls Clean Water Act

NASA Astrophysics Data System (ADS)

Bush, Susan

Although reauthorization of the Clean Water Act was scheduled for 1992, action has stalled due to debate over the contentious wetland issue and is not likely to pick up again until after the first of the year. The subject of the debate, regulation of wetlands, is found in Section 404, which makes up only a small part of the Clean Water Act.At the meeting, “New Directions in Clean Water Policy,” held in Charlottesville, Va., July 28-31, Ralph Heimlich, an economist with the Office of Policy and Planning Evaluation at the Environmental Protection Agency, said “it is unfortunate that the Section 404 Dredge and Fill permit program, our only national wetland regulation, is part of the Clean Water Act.” The controversy over wetland reform, he added, “has delayed and threatens to poison action on Clean Water Act reauthorization, provisions that may be more directly significant in improving water quality.”

76 FR 76318 - Defense Federal Acquisition Regulation Supplement; Technical Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

... Defense Business Transformation Agency Contracting Office. PART 204--ADMINISTRATIVE MATTERS 204.402...) * * * (iii) For special notices for small business events, follow the procedures at PGI 205.207(d)(ii). PART... Economy Act order. PART 219--SMALL BUSINESS PROGRAMS 0 22. Section 219.202-1 is added to read as follows...

48 CFR 19.000 - Scope of part.

Code of Federal Regulations, 2010 CFR

2010-10-01

... PROGRAMS SMALL BUSINESS PROGRAMS 19.000 Scope of part. (a) This part implements the acquisition-related sections of the Small Business Act (15 U.S.C. 631, et seq.), applicable sections of the Armed Services...), section 7102 of the Federal Acquisition Streamlining Act of 1994 (Public Law 103-355), 10 U.S.C. 2323, and...

Application of magnetic pulse forming to aeronautic small pieces

NASA Astrophysics Data System (ADS)

Sow, C.; Bazin, G.; Daniel, D.; Bon, E.; Priem, D.; Racineux, G.

2018-05-01

Stelia Aerospace company is specialized in the forming of small (Lmax <200 mm), medium (200 mm 1000 mm) sheets for the aerospace industry. In order to diversify the production facilities of Stelia Aerospace we evaluated the capacity of the magnetic pulse forming to produce small parts. The material used is the aluminum alloy 2024-T4. The sheets used have a thickness of 1 mm, 2 mm and 1.6 mm. Stelia Aerospace manufactures more than 100 different small parts but they are all made up of a limited set of elementary geometries. These elementary geometries include: straight and interrupted straight fallen edges, concave and convex fallen edges, fallen edges holes and joggling. In this paper we present the work we have done to develop forming tools for one of these elementary geometries, the straight fallen edge. Special attention is paid to the geometric and metallurgic quality of parts. In order to evaluate dimensional reproducibility of the process, smalls series of parts were produced.

[Small rodents in the forest ecosystem as infectious disease reservoirs].

PubMed

Margaletić, Josip

2003-01-01

Due to numerousness of populations and width of ecologic valence, small rodents are important parts of almost any forest ecosystem. The represent an important animal group, which connects primary makers with higher trophic levels. They transmit various infectious diseases dangerous for the health of people and domestic and wild animals (trichinosis, leptospirosis, tick encephalitis, Lyme disease, hemorrhagic fever with renal syndrome, etc.). The following species of small rodents live in forest ecosystems of Croatia: Chletrionomys glareolus Schreib., Arvicola terrestris L, M. subterraneus de Sel., M. arvalis Pall., M. agrestis L, M. multiplex Fat., Apodemus agrarius Pall., A. sylvaticus L. and A. flavicollis Melch. Small rodents transmit causative agents of diseases in active (excretion products) of passive (ectoparasites and endoparasites) ways. Their multiplication potential is quite high. Transmission of certain disease sometimes takes place extremely fast due to the high number of rodents, their high movability and distribution, and the fact that they easily get in touch with men and domestic and wild animals. The number of population of each species is directly influenced by abiotic and biotic factors and changes during one year and in a several year period. In a year when the influence of ecologic factors is favorable, it is presumed that the number of these rodents will significantly increase, by which the danger of their damaging effect also increases. The following factors influence the increase of a small rodent population: number and physiologic condition of the population, meteorologic conditions, habitat, food sources, natural enemies, and diseases. The occurrence of an epidemic is closely connected to the number and infectivity of causative agents. Regular control of the number of rodent population and their infectivity can help in planning preventive epidemiologic and sanitary measures to preclude the occurrence of epidemics and individual cases of disease among animals and humans who come in contact with forest (forest workers, holiday makers, hikers, soldiers, tourists, etc.).

Wrinkle structures—a critical review

NASA Astrophysics Data System (ADS)

Porada, Hubertus; Bouougri, El Hafid

2007-04-01

In this paper, a variety of so-called 'wrinkle structures' is reviewed in an attempt to help distinguish between crinkly decorations arising from physical processes that acted on siliciclastic bedding surfaces, and true microbially induced 'wrinkle structures'. Two types of small-scale, microbially induced sedimentary structures are prominent due to their distinct geometry and mode of occurrence: (1) 'elephant skin' textures, characterized by reticulate patterns of sharp-crested ridges forming mm- to cm-scale polygons, occurring on argillite or argillaceous veneers above fine-grained sandstone and likely reflecting growth structures of microbial, mats (2) 'Kinneyia' structures, characterized by mm-scale flat-topped, winding ridges and intervening troughs and pits, sometimes resembling small-scale interference ripples. 'Kinneyia' structures usually occur on upper surfaces of siltstone/sandstone beds, themselves frequently event deposits, and are thought to have formed beneath microbial mats. Additionally, more linear variations of mat growth structures, partly resembling small-scale 'α-petees' may be developed. Finally, some wrinkly structures resulting from tractional mat deformation or mat slumping are occasionally preserved. These may appear as arcuate belts of non-penetrative, small-scale folds or as wrinkled bulges on otherwise flat surfaces. 'Wrinkle structures' as indicators for the former presence of mats gain in importance if other mat-related structures are additionally observed in the same clastic succession, e.g. 'sand chips' (sandy intraclasts) or spindle-shaped or sinuously curved to circular sand cracks, frequently combined in networks. Furthermore, appropriate lithologies and facies are required. For instance, if compared with the distribution of modern cohesive microbial mats, laminated siltstone/argillite with intercalated siltstone/sandstone beds representing event deposits in tidal flat successions would be compatible with microbial mat development. Within a variety of physically induced small-scale wrinkly structures, miniature load structures may, above all, be misinterpreted as microbially induced 'wrinkle structures', due to their similar size and appearance, and their comparatively frequent occurrence.

14 CFR Appendix F to Part 36 - Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter...

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter Category Airplane Certification Tests Prior to.... F Appendix F to Part 36—Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller...

14 CFR Appendix F to Part 36 - Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter Category Airplane Certification Tests Prior to.... F Appendix F to Part 36—Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller...

14 CFR Appendix F to Part 36 - Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter...

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter Category Airplane Certification Tests Prior to.... F Appendix F to Part 36—Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller...

14 CFR Appendix F to Part 36 - Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter...

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter Category Airplane Certification Tests Prior to.... F Appendix F to Part 36—Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller...

14 CFR Appendix F to Part 36 - Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter...

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller-Driven, Commuter Category Airplane Certification Tests Prior to.... F Appendix F to Part 36—Flyover Noise Requirements for Propeller-Driven Small Airplane and Propeller...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon, I.M.; Pichakhchi, L.D.

It is shown that the emission spectrum of T Tauri stars with anomalous continuous radiation in the ultraviolet can be explained by assuming that it is a negative absorption spectrum of hydrogen excited by synchrotron radiation of great intensity in a small part of the star's atmosphere--in its active zone. A method was also proposed for the determination of the spectrum of synchrotron radiation from the observed hydrogen emission spectrum. The intensity in the infrared part of the spectrum was determined from the broadening of the higher terms of the Balmer series that form the quasicontinuum, while the intensity inmore » the ultraviolet was determined from hydrogen ionization. In the present study the distribution of hydrogen atoms among the excited levels in the field of such radiation is calculated using an electronic computer. The calculations show that the Balmer lines will in fact be observed in emission due to induced transitions, i.e., as a sequence of negative absorption lines. The considerable overpopulation of the upper levels is responsible for the small Balmer decrement and the appearance of anomalous emission in the ultraviolet and also for the increase in intensity of the latter when approaching the Balmer discontinuity. Thus the theory of the excitation of the emission spectrum of T Tauri stars is confirmed quantitatively. (auth)« less

Directive and enhanced spontaneous emission using shifted cubes nanoantenna

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bahari, B.; Tellez-Limon, R.; Kante, B., E-mail: bkante@ucsd.edu

2016-09-07

Recent studies have demonstrated that nano-patch antennas formed by metallic nanocubes placed on top of a metallic film largely enhance the spontaneous emission rate of quantum emitters due to the confinement of the electromagnetic field in the small nanogap cavity. The popularity of this architecture is, in part, due to the ease in fabrication. In this contribution, we theoretically demonstrate that a dimer formed by two metallic nanocubes embedded in a dielectric medium exhibits enhanced emission rate compared to the nano-patch antenna. Furthermore, we compare the directivity and radiation efficiency of both nanoantennas. From these characteristics, we obtained information aboutmore » the “material efficiency” and the coupling mismatch efficiency between a dipole emitter and the nanoantenna. These quantities provide a more intuitive insight than the Purcell factor or localized density of states, opening new perspectives in nanoantenna design for ultra-directive light emission.« less

Giant Thermal Expansion in 2D and 3D Cellular Materials.

PubMed

Zhu, Hanxing; Fan, Tongxiang; Peng, Qing; Zhang, Di

2018-05-01

When temperature increases, the volume of an object changes. This property was quantified as the coefficient of thermal expansion only a few hundred years ago. Part of the reason is that the change of volume due to the variation of temperature is in general extremely small and imperceptible. Here, abnormal giant linear thermal expansions in different types of two-ingredient microstructured hierarchical and self-similar cellular materials are reported. The cellular materials can be 2D or 3D, and isotropic or anisotropic, with a positive or negative thermal expansion due to the convex or/and concave shape in their representative volume elements respectively. The magnitude of the thermal expansion coefficient can be several times larger than the highest value reported in the literature. This study suggests an innovative approach to develop temperature-sensitive functional materials and devices. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Electric Field Effects on the Hidden Order of Microstructured URu 2Si 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stritzinger, Laurel Elaine Winter; Mcdonald, Ross David; Harrison, Neil

2017-03-23

Despite being studied for over 30 years there is still continual interest in they heavy-fermion URu 2Si 2 due largely in part to the still disagreed upon origin of the so-called hidden-order (HO) state that arises below THO = 17.5 K. While both the application of pressure and high magnetic fields have been shown to suppress the HO state, one mechanism that has yet to be explored is the application of an electric field, most likely due to the difficulty of measuring such an effect in a metal. To overcome this challenge we have used focused ion beam (FIB) lithographymore » to obtain the necessary sample geometry to create an electric field across a small section of the sample by applying a voltage. Our results suggest that at low temperatures the application of an electric field is able to suppress the hidden order state.« less

Central hypothyroidism and its role for cardiovascular risk factors in hypopituitary patients.

PubMed

Feldt-Rasmussen, Ulla; Klose, Marianne

2016-10-01

Hypothyroidism is characterized by hypometabolism, and may be seen as a part of secondary failure due to pituitary insufficiency or tertiary due to hypothalamic disease. Secondary and tertiary failures are also referred to as central hypothyroidism. Whereas overt primary hypothyroidism has a well-known affection on the heart and cardiovascular system, and may result in cardiac failure, cardiovascular affection is less well recognized in central hypothyroidism. Studies on central hypothyroidism and cardiovascular outcome are few and given the rarity of the diseases often small. Further, there are several limitations given vast difficulties in diagnosing the condition correctly biochemically, and difficulties monitoring the treatment because normal thyroid-pituitary feedback interrelationships are disrupted. The present review summarizes available studies of central adult hypothyroidism and its possible influence on the cardiovascular system, describe differences from primary thyroid failure and seek evidence for performing guidelines for clinical management of this particular thyroid and hypothalamo-pituitary disorder.

Time-dependent local potential in a Tomonaga-Luttinger liquid

NASA Astrophysics Data System (ADS)

Kamar, Naushad Ahmad; Giamarchi, Thierry

2017-12-01

We study the energy deposition in a one-dimensional interacting quantum system with a pointlike potential modulated in amplitude. The pointlike potential at position x =0 has a constant part and a small oscillation in time with a frequency ω . We use bosonization, renormalization group, and linear response theory to calculate the corresponding energy deposition. It exhibits a power law behavior as a function of the frequency that reflects the Tomonaga-Luttinger liquid (TLL) nature of the system. Depending on the interactions in the system, characterized by the TLL parameter K of the system, a crossover between weak and strong coupling for the backscattering due to the potential is possible. We compute the frequency scale ω*, at which such crossover exists. We find that the energy deposition due to the backscattering shows different exponents for K >1 and K <1 . We discuss possible experimental consequences, in the context of cold atomic gases, of our theoretical results.

Robust UHTC for Sharp Leading Edge Applications

NASA Technical Reports Server (NTRS)

Levine, Stanley R.; Singh, Mrityunjay; Opila, Elizabeth J.

2003-01-01

Ultrahigh temperature ceramics have performed unreliably due to material flaws and attachment design. These deficiencies are brought to the fore by the low fracture toughness and thermal shock resistance of UHTCs. If these deficiencies are overcome, we are still faced with poor oxidation resistance as a limitation on UHTC applicability to reusable launch vehicles. We have been addressing the deficiencies of UHTCs for the past year via a small task at GRC that is part of the 3rd Gen TPS effort. Our focus is on composite constructions and functional grading to address the mechanical issues and on composition modification to address the oxidation issue. The approaches and progress will be reported.

Cancer genetics and reproduction.

PubMed

Hanson, Helen; Hodgson, Shirley

2010-02-01

Cancers of the reproductive organs (i.e., ovaries, uterus and testes), like other cancers, occur as a result of a multi-stage interaction of genetic and environmental factors. A small proportion of cancers of the reproductive organs occur as part of a recognised cancer syndrome, as a result of inheritance of mutations in highly penetrant cancer susceptibility genes (e.g., BRCA1, BRCA2, MLH1 or MSH2). Recognition of individuals and families with inherited cancer predisposition syndromes and individuals at high risk due to familial cancer clustering is fundamentally important for the management and treatment of the current cancer and for future prevention of further cancers for the individual and their extended family.

Fluorescence In Situ Hybridization–Based Karyotyping of Soybean Translocation Lines

PubMed Central

Findley, Seth D.; Pappas, Allison L.; Cui, Yaya; Birchler, James A.; Palmer, Reid G.; Stacey, Gary

2011-01-01

Soybean (Glycine max [L.] Merr.) is a major crop species and, therefore, a major target of genomic and genetic research. However, in contrast to other plant species, relatively few chromosomal aberrations have been identified and characterized in soybean. This is due in part to the difficulty of cytogenetic analysis of its small, morphologically homogeneous chromosomes. The recent development of a fluorescence in situ hybridization –based karyotyping system for soybean has enabled our characterization of most of the chromosomal translocation lines identified to date. Utilizing genetic data from existing translocation studies in soybean, we identified the chromosomes and approximate breakpoints involved in five translocation lines. PMID:22384324

Internal flow characteristics in scaled pressure-swirl atomizer

NASA Astrophysics Data System (ADS)

Malý, Milan; Sapík, Marcel; Jedelský, Jan; Janáčková, Lada; Jícha, Miroslav; Sláma, Jaroslav; Wigley, Graham

2018-06-01

Pressure-swirl atomizers are used in a wide range of industrial applications, e.g.: combustion, cooling, painting, food processing etc. Their spray characteristics are closely linked to the internal flow which predetermines the parameters of the liquid sheet formed at the discharge orifice. To achieve a better understanding of the spray formation process, the internal flow was characterised using Laser Doppler Anemometry (LDA) and high-speed imaging in a transparent model made of cast PMMA (Poly(methyl methacrylate)). The design of the transparent atomizer was derived from a pressure-swirl atomizer as used in a small gas turbine. Due to the small dimensions, it was manufactured in a scale of 10:1. It has modular concept and consists of three parts which were ground, polished and bolted together. The original kerosene-type jet A-1 fuel had to be replaced due to the necessity of a refractive index match. The new working liquid should also be colourless, non-aggressive to the PMMA and have the appropriate viscosity to achieve the same Reynolds number as in the original atomizer. Several liquids were chosen and tested to satisfy these requirements. P-Cymene was chosen as the suitable working liquid. The internal flow characteristics were consequently examined by LDA and high-speed camera using p-Cymene and Kerosene-type jet A-1 in comparative manner.

Smart actuation of inlet guide vanes for small turbine engine

NASA Astrophysics Data System (ADS)

Rusovici, Razvan; Kwok Choon, Stephen T.; Sepri, Paavo; Feys, Joshuo

2011-04-01

Unmanned Aerial Vehicles (UAVs) have gained popularity over the past few years to become an indispensable part of aerial missions that include reconnaissance, surveillance, and communication [1]. As a result, advancements in small jet-engine performance are needed to increase the performance (range, payload and efficiency) of the UAV. These jet engines designed especially for UAV's are characterized by thrust force on the order of 100N and due to their size and weight limitations, may lack advanced flow control devices such as IGV [2]. The goal of the current study was to present a conceptual design of an IGV smart-material based actuation mechanism that would be simple, compact and lightweight. The compressor section of an engine increases the pressure and conditions the flow before the air enters the combustion chamber [3]. The airflow entering the compressor is often turbulent due to the high angle of incidence between engine inlet and free-stream velocity, or existing atmospheric turbulence. Actuated IGV are used to help control the relative angle of incidence of the flow that enters the engine compressor, thereby preventing flow separation, compressor stall and thus extending the compressor's operating envelope [4]. Turbine jet- engines which employ variable IGV were developed by Rolls Royce (Trent DR-900) and General Electric (J79).

Associations Between Fetal Growth and Self-Perceived Health Throughout Adulthood: A Co-twin Control Study.

PubMed

Mosing, Miriam A; Cnattingius, Sven; Gatz, Margaret; Neiderhiser, Jenae M; Pedersen, Nancy L

2016-05-01

The literature shows evidence for long-lasting effects of low birth weight (LBW) on many health outcomes, but little is known about effects on self-perceived health. Findings are mixed and studies are small, mostly focusing on LBW effects on health outcomes before adulthood. Further, as LBW and most health conditions including self-perceived health are partly heritable, associations between birth weight (BW) and adverse health outcomes may also be due to shared genetic as well as other (pre- and postnatal) unmeasured environmental influences. We explored LBW effects on self-perceived health in early and later adulthood using a very large and genetically informative sample of more than 50,000 Swedish twins. In addition, analyses within twin pairs (the co-twin control design) were used to examine potential associations between BW and the offspring's risk for poor self-perceived health independent of shared environmental or genetic factors, evidence which is critical for the understanding of underlying mechanisms. Results showed that lower BW was significantly associated with poorer self-perceived health during adulthood, although the effect size was small. Co-twin control analyses suggested that this increased risk may be due to shared underlying liability (environmental or genetic) rather than a direct effect of BW, but findings were not conclusive.

Pneumothorax effects on pulmonary acoustic transmission

PubMed Central

Balk, Robert A.; Warren, William H.; Royston, Thomas J.; Dai, Zoujun; Peng, Ying; Sandler, Richard H.

2015-01-01

Pneumothorax (PTX) is an abnormal accumulation of air between the lung and the chest wall. It is a relatively common and potentially life-threatening condition encountered in patients who are critically ill or have experienced trauma. Auscultatory signs of PTX include decreased breath sounds during the physical examination. The objective of this exploratory study was to investigate the changes in sound transmission in the thorax due to PTX in humans. Nineteen human subjects who underwent video-assisted thoracic surgery, during which lung collapse is a normal part of the surgery, participated in the study. After subjects were intubated and mechanically ventilated, sounds were introduced into their airways via an endotracheal tube. Sounds were then measured over the chest surface before and after lung collapse. PTX caused small changes in acoustic transmission for frequencies below 400 Hz. A larger decrease in sound transmission was observed from 400 to 600 Hz, possibly due to the stronger acoustic transmission blocking of the pleural air. At frequencies above 1 kHz, the sound waves became weaker and so did their changes with PTX. The study elucidated some of the possible mechanisms of sound propagation changes with PTX. Sound transmission measurement was able to distinguish between baseline and PTX states in this small patient group. Future studies are needed to evaluate this technique in a wider population. PMID:26023225

High-precision and high-speed laser microjoining for electronics and microsystems

NASA Astrophysics Data System (ADS)

Gillner, Arnold; Olowinsky, Alexander; Klages, Kilian; Gedicke, Jens; Sari, Fahri

2006-02-01

The joining processes in electronic device manufacturing are today still dominated by conventional joining techniques like press fitting, crimping and resistance welding. Laser beam joining techniques have been under intensive investigations and subsequently new processes for mass manufacturing and high accuracy assembling were established. With the newly developed SHADOW (R) welding technology technical aspects such as tensile strength, geometry and precision of the weld could be improved. This technology provides highest flexibility in weld geometry with a minimum welding time as well as new possibilities in using application adapted materials. Different parts and even different metals can be joined by a non-contact process. The application of a relative movement between the laser beam and the part to be joined at feed rates of up to 60 m/min produces weld seams with a length from 0.6 mm to 15.7 mm using a pulsed Nd:YAG laser with a pulse duration of up to 50 ms. Due to the low energy input, typically 1 J to 6 J, a weld width as small as 50 μm and a weld depth as small as 20 pm have been attained. This results in low distortion of the joined watch components. Within this paper this new welding process will be explained and several examples of joined components will be presented with respect to fundamentals and the sustainable implementation of the SHADOW (R) welding technique into watch manufacturing and electronic industry. For microsystem applications the laser joining technology is modified to join even silicon and glass parts without any melting based on the formation of a thermally induced oxygen bond. New fields of applications for joining different materials such as steel to brass or steel to copper for electrical interconnects will be discussed. Here the SHADOW (R) welding technique offers new possibilities for the combination of good electrical properties of copper with high mechanical stiffness of steel. The paper will give a closer look to microjoining applications especially using the SHADOW (R) welding technique. Basics of the process as well as its application on dedicated examples will be shown for small parts such as axis-wheel combinations and electrical connectors.

Rapid Inversion: Running Animals and Robots Swing like a Pendulum under Ledges

PubMed Central

Mongeau, Jean-Michel; McRae, Brian; Jusufi, Ardian; Birkmeyer, Paul; Hoover, Aaron M.; Fearing, Ronald; Full, Robert J.

2012-01-01

Escaping from predators often demands that animals rapidly negotiate complex environments. The smallest animals attain relatively fast speeds with high frequency leg cycling, wing flapping or body undulations, but absolute speeds are slow compared to larger animals. Instead, small animals benefit from the advantages of enhanced maneuverability in part due to scaling. Here, we report a novel behavior in small, legged runners that may facilitate their escape by disappearance from predators. We video recorded cockroaches and geckos rapidly running up an incline toward a ledge, digitized their motion and created a simple model to generalize the behavior. Both species ran rapidly at 12–15 body lengths-per-second toward the ledge without braking, dove off the ledge, attached their feet by claws like a grappling hook, and used a pendulum-like motion that can exceed one meter-per-second to swing around to an inverted position under the ledge, out of sight. We discovered geckos in Southeast Asia can execute this escape behavior in the field. Quantification of these acrobatic behaviors provides biological inspiration toward the design of small, highly mobile search-and-rescue robots that can assist us during natural and human-made disasters. We report the first steps toward this new capability in a small, hexapedal robot. PMID:22701594

So Small, So Loud: Extremely High Sound Pressure Level from a Pygmy Aquatic Insect (Corixidae, Micronectinae)

PubMed Central

Sueur, Jérôme; Mackie, David; Windmill, James F. C.

2011-01-01

To communicate at long range, animals have to produce intense but intelligible signals. This task might be difficult to achieve due to mechanical constraints, in particular relating to body size. Whilst the acoustic behaviour of large marine and terrestrial animals has been thoroughly studied, very little is known about the sound produced by small arthropods living in freshwater habitats. Here we analyse for the first time the calling song produced by the male of a small insect, the water boatman Micronecta scholtzi. The song is made of three distinct parts differing in their temporal and amplitude parameters, but not in their frequency content. Sound is produced at 78.9 (63.6–82.2) SPL rms re 2.10−5 Pa with a peak at 99.2 (85.7–104.6) SPL re 2.10−5 Pa estimated at a distance of one metre. This energy output is significant considering the small size of the insect. When scaled to body length and compared to 227 other acoustic species, the acoustic energy produced by M. scholtzi appears as an extreme value, outperforming marine and terrestrial mammal vocalisations. Such an extreme display may be interpreted as an exaggerated secondary sexual trait resulting from a runaway sexual selection without predation pressure. PMID:21698252

Minimus: a fast, lightweight genome assembler.

PubMed

Sommer, Daniel D; Delcher, Arthur L; Salzberg, Steven L; Pop, Mihai

2007-02-26

Genome assemblers have grown very large and complex in response to the need for algorithms to handle the challenges of large whole-genome sequencing projects. Many of the most common uses of assemblers, however, are best served by a simpler type of assembler that requires fewer software components, uses less memory, and is far easier to install and run. We have developed the Minimus assembler to address these issues, and tested it on a range of assembly problems. We show that Minimus performs well on several small assembly tasks, including the assembly of viral genomes, individual genes, and BAC clones. In addition, we evaluate Minimus' performance in assembling bacterial genomes in order to assess its suitability as a component of a larger assembly pipeline. We show that, unlike other software currently used for these tasks, Minimus produces significantly fewer assembly errors, at the cost of generating a more fragmented assembly. We find that for small genomes and other small assembly tasks, Minimus is faster and far more flexible than existing tools. Due to its small size and modular design Minimus is perfectly suited to be a component of complex assembly pipelines. Minimus is released as an open-source software project and the code is available as part of the AMOS project at Sourceforge.

So small, so loud: extremely high sound pressure level from a pygmy aquatic insect (Corixidae, Micronectinae).

PubMed

Sueur, Jérôme; Mackie, David; Windmill, James F C

2011-01-01

To communicate at long range, animals have to produce intense but intelligible signals. This task might be difficult to achieve due to mechanical constraints, in particular relating to body size. Whilst the acoustic behaviour of large marine and terrestrial animals has been thoroughly studied, very little is known about the sound produced by small arthropods living in freshwater habitats. Here we analyse for the first time the calling song produced by the male of a small insect, the water boatman Micronecta scholtzi. The song is made of three distinct parts differing in their temporal and amplitude parameters, but not in their frequency content. Sound is produced at 78.9 (63.6-82.2) SPL rms re 2.10(-5) Pa with a peak at 99.2 (85.7-104.6) SPL re 2.10(-5) Pa estimated at a distance of one metre. This energy output is significant considering the small size of the insect. When scaled to body length and compared to 227 other acoustic species, the acoustic energy produced by M. scholtzi appears as an extreme value, outperforming marine and terrestrial mammal vocalisations. Such an extreme display may be interpreted as an exaggerated secondary sexual trait resulting from a runaway sexual selection without predation pressure.

Post-processing of 3D-printed parts using femtosecond and picosecond laser radiation

NASA Astrophysics Data System (ADS)

Mingareev, Ilya; Gehlich, Nils; Bonhoff, Tobias; Meiners, Wilhelm; Kelbassa, Ingomar; Biermann, Tim; Richardson, Martin C.

2014-03-01

Additive manufacturing, also known as 3D-printing, is a near-net shape manufacturing approach, delivering part geometry that can be considerably affected by various process conditions, heat-induced distortions, solidified melt droplets, partially fused powders, and surface modifications induced by the manufacturing tool motion and processing strategy. High-repetition rate femtosecond and picosecond laser radiation was utilized to improve surface quality of metal parts manufactured by laser additive techniques. Different laser scanning approaches were utilized to increase the ablation efficiency and to reduce the surface roughness while preserving the initial part geometry. We studied post-processing of 3D-shaped parts made of Nickel- and Titanium-base alloys by utilizing Selective Laser Melting (SLM) and Laser Metal Deposition (LMD) as additive manufacturing techniques. Process parameters such as the pulse energy, the number of layers and their spatial separation were varied. Surface processing in several layers was necessary to remove the excessive material, such as individual powder particles, and to reduce the average surface roughness from asdeposited 22-45 μm to a few microns. Due to the ultrafast laser-processing regime and the small heat-affected zone induced in materials, this novel integrated manufacturing approach can be used to post-process parts made of thermally and mechanically sensitive materials, and to attain complex designed shapes with micrometer precision.

What Dominates the Coronal Emission Spectrum During the Cycle of Impulsive Heating and Cooling?

NASA Technical Reports Server (NTRS)

Bradshaw, Stephen J.; Klimchuk, James A.

2011-01-01

The smoking gun of small-scale, impulsive events heating the solar corona is expected to be the presence of a hot ( > 5 MK) plasma component. Evidence for this has been scarce, but has gradually begun to accumulate due to recent studies designed to constrain the high temperature part of the emission measure distribution. However, the detected hot component is often weaker than models predict and this is due in part to the common modeling assumption that the ionization balance remains in equilibrium. The launch of the latest generation of space-based observing instrumentation aboard Hinode and the Solar Dynamics Observatory (SDO) has brought the matter of the ionization state of the plasma firmly to the forefront. It is timely to consider exactly what emission current instruments would detect when observing a corona heated impulsively on small-scales by nanoflares. Only after we understand the full effects of nonequilibrium ionization can we draw meaningful conclusions about the plasma that is (or is not) present. We have therefore performed a series of hydrodynamic simulations for a variety of different nanoflare properties and initial conditions. Our study has led to several key conclusions. 1. Deviations from equilibrium are greatest for short-duration nanoflares at low initial coronal densities. 2. Hot emission lines are the most affected and are suppressed sometimes to the point of being invisible. 3. The emission detected in all of the SDO-AIA channels is generally dominated by warm, over-dense, cooling plasma. 4. It is difficult not to create coronal loops that emit strongly at 1.5 MK and in the range 2 to 5 MK, which are the most commonly observed kind, for a broad range of nanoflare scenarios. 5. The Fe XV (284.16 ) emission in most of our models is about 10 times brighter than the Ca XVII (192.82 ) emission, consistent with observations. Our overarching conclusion is that small-scale, impulsive heating inducing a nonequilibrium ionization state leads to predictions for observable quantities that are entirely consistent with what is actually observed.

Progress in the Discovery of Treatments for C. difficile Infection: A Clinical and Medicinal Chemistry Review

PubMed Central

Tsutsumi, Lissa S.; Owusu, Yaw B.; Hurdle, Julian G.; Sun, Dianqing

2014-01-01

Clostridium difficile is an anaerobic, Gram-positive pathogen that causes C. difficile infection, which results in significant morbidity and mortality. The incidence of C. difficile infection in developed countries has become increasingly high due to the emergence of newer epidemic strains, a growing elderly population, extensive use of broad spectrum antibiotics, and limited therapies for this diarrheal disease. Because treatment options currently available for C. difficile infection have some drawbacks, including cost, promotion of resistance, and selectivity problems, new agents are urgently needed to address these challenges. This review article focuses on two parts: the first part summarizes current clinical treatment strategies and agents under clinical development for C. difficile infection; the second part reviews newly reported anti-difficile agents that have been evaluated or reevaluated in the last five years and are in the early stages of drug discovery and development. Antibiotics are divided into natural product inspired and synthetic small molecule compounds that may have the potential to be more efficacious than currently approved treatments. This includes potency, selectivity, reduced cytotoxicity, and novel modes of action to prevent resistance. PMID:24236721

Klippel-Trenaunay syndrome in a Border collie.

PubMed

de Cock, H; Mols, N; van Roy, M R; Ducatelle, R; Simoens, P

1996-10-01

A Border collie was presented at the age of 9 weeks with several lesions of the right forelimb, including a reddish-blue haemangiomatous macula in the medio-dorsal part of the elbow, multiple, scattered small cavernous haemangioma-like lesions at the plantar part of the foot and a general hypertrophy of the limb. X-rays of the limb showed osteolysis. On skin biopsy, telangiectatic veins were observed. The rest of the body did not show any skin lesions or hypertrophy. The dog was otherwise healthy. Due to the extension of the lesions and worsening of the limb swelling, it was decided to amputate the affected limb. The dog remained healthy for 2 weeks, but then passed through episodes of anaemia, and finally died suddenly with signs of shock. Dissection of the limb after amputation revealed hypoplasia and aplasia of the deep venous system in the lower part of the leg. No arterio-venous shunts were noticed. ln man, this syndrome, characterised by an insufficiently developed deep venous system associated with local overgrowth of the limb and cutaneous telangiectasia, is known as Klippel-Trenaunay syndrome.

Imaginary geometric phases of quantum trajectories in high-order terahertz sideband generation

NASA Astrophysics Data System (ADS)

Yang, Fan; Liu, Ren-Bao

2014-03-01

Quantum evolution of particles under strong fields can be described by a small number of quantum trajectories that satisfy the stationary phase condition in the Dirac-Feynmann path integral. The quantum trajectories are the key concept to understand the high-order terahertz siedeband generation (HSG) in semiconductors. Due to the nontrivial ``vacuum'' states of band materials, the quantum trajectories of optically excited electron-hole pairs in semiconductors can accumulate geometric phases under the driving of an elliptically polarized THz field. We find that the geometric phase of the stationary trajectory is generally complex with both real and imaginary parts. In monolayer MoS2, the imaginary parts of the geometric phase leads to a changing of the polarization ellipticity of the sideband. We further show that the imaginary part originates from the quantum interference of many trajectories with different phases. Thus the observation of the polarization ellipticity of the sideband shall be a good indication of the quantum nature of the stationary trajectory. This work is supported by Hong Kong RGC/GRF 401512 and the CUHK Focused Investments Scheme.

40 CFR Table 5 to Subpart Jjj of... - Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units

Code of Federal Regulations, 2013 CFR

2013-07-01

... Existing Small Municipal Waste Combustion Units 5 Table 5 to Subpart JJJ of Part 62 Protection of... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 5 Table 5 to Subpart JJJ of Part 62—Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units...

40 CFR Table 5 to Subpart Jjj of... - Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units

Code of Federal Regulations, 2011 CFR

2011-07-01

... Existing Small Municipal Waste Combustion Units 5 Table 5 to Subpart JJJ of Part 62 Protection of... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 5 Table 5 to Subpart JJJ of Part 62—Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units...

40 CFR Table 5 to Subpart Jjj of... - Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units

Code of Federal Regulations, 2012 CFR

2012-07-01

... Existing Small Municipal Waste Combustion Units 5 Table 5 to Subpart JJJ of Part 62 Protection of... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 5 Table 5 to Subpart JJJ of Part 62—Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units...

40 CFR Table 5 to Subpart Jjj of... - Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units

Code of Federal Regulations, 2014 CFR

2014-07-01

... Existing Small Municipal Waste Combustion Units 5 Table 5 to Subpart JJJ of Part 62 Protection of... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 5 Table 5 to Subpart JJJ of Part 62—Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units...

40 CFR Table 5 to Subpart Jjj of... - Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units

Code of Federal Regulations, 2010 CFR

2010-07-01

... Existing Small Municipal Waste Combustion Units 5 Table 5 to Subpart JJJ of Part 62 Protection of... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 5 Table 5 to Subpart JJJ of Part 62—Carbon Monoxide Emission Limits for Existing Small Municipal Waste Combustion Units...

40 CFR Appendix A to Subpart F of... - Sampling Plans for Selective Enforcement Auditing of Small Nonroad Engines

Code of Federal Regulations, 2010 CFR

2010-07-01

... Enforcement Auditing of Small Nonroad Engines A Appendix A to Subpart F of Part 90 Protection of Environment...-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Selective Enforcement Auditing Pt. 90, Subpt. F, App. A Appendix A to Subpart F of Part 90—Sampling Plans for Selective Enforcement Auditing of Small Nonroad Engines...

The (Im)possible Pursuit of the College Degree: Exploring the Experiences of a Small Urban High School's Alumni

ERIC Educational Resources Information Center

Rivera-McCutchen, Rosa L.

2016-01-01

Bridges Institute is a small public urban high school founded in 1994 as part of the restructuring of a failing comprehensive high school. Part of a network of "critical" small schools in New York City, Bridges aims to interrupt the educational neglect of their students through carefully designed student-centered instruction and…

Comparative analysis of the processing accuracy of high strength metal sheets by AWJ, laser and plasma

NASA Astrophysics Data System (ADS)

Radu, M. C.; Schnakovszky, C.; Herghelegiu, E.; Tampu, N. C.; Zichil, V.

2016-08-01

Experimental tests were carried out on two high-strength steel materials (Ramor 400 and Ramor 550). Quantification of the dimensional accuracy was achieved by measuring the deviations from some geometric parameters of part (two lengths and two radii). It was found that in case of Ramor 400 steel, at the jet inlet, the deviations from the part radii are quite small for all the three analysed processes. Instead for the linear dimensions, the deviations are small only in case of laser cutting. At the jet outlet, the deviations raised in small amount compared to those obtained at the jet inlet for both materials as well as for all the three processes. Related to Ramor 550 steel, at the jet inlet the deviations from the part radii are very small in case of AWJ and laser cutting but larger in case of plasma cutting. At the jet outlet, the deviations from the part radii are very small for all processes; in case of linear dimensions, there was obtained very small deviations only in the case of laser processing, the other two processes leading to very large deviations.

Lake-levels, vegetation and climate in Central Asia during the Last Glacial Maximum

NASA Astrophysics Data System (ADS)

Amosov, Mikhail

2014-05-01

Central Asian region is bounded in the east corner of the Greater Khingan Range and the Loess Plateau, and to the west - the Caspian Sea. This representation of region boundaries is based on classical works of A.Humboldt and V.Obruchev. Three typical features of Central Asia nature are: climate aridity, extensive inland drainage basins with numerous lakes and mountain systems with developed glaciation. Nowadays the extensive data is accumulated about lake-levels during the Last Glacial Maximum (LGM) in Central Asia. Data compilation on 20 depressions, where lakes exist now or where they existed during LGM, shows that most of them had usually higher lake-level than at present time. This regularity could be mentioned for the biggest lakes (the Aral Sea, the Balkhash, the Ysyk-Kol etc.) and for small ones that located in the mountains (Tien Shan, Pamir and Tibet). All of these lake basins get the precipitation due to westerlies. On the other hand lakes, which are located in region's east rimland (Lake Qinghai and lakes in Inner Mongolia) and get the precipitation due to summer East Asian monsoons, do not comply with the proposed regularity. During LGM these lake-levels were lower than nowadays. Another exception is Lake Manas, its lake-level was also lowered. Lake Manas is situated at the bottom of Junggar Basin. There are many small rivers, which come from the ranges and suffer the violent fluctuation in the position of its lower channel. It is possible to assume that some of its runoff did not get to Lake Manas during LGM. Mentioned facts suggest that levels of the most Central Asian lakes were higher during LGM comparing to their current situation. However, at that period vegetation was more xerophytic than now. Pollen data confirm this information for Tibet, Pamir and Tien Shan. Climate aridization of Central Asia can be proved by data about the intensity of loess accumulation during LGM. This evidence received for the east part of region (the Loess Plateau) and for its west part (the piedmonts of Tien Shan and Pamir Mountains). So it confirms a synchronous aridization in different parts of Central Asia. It was the result of amplification of winter Siberian anticyclone, weakening westerlies and East Asian summer monsoons. The observed discrepancy between vegetation conditions and lake-levels during LGM can be explained by lake-levels dependence on runoff as now from mountains, where snow and glaciers melt. Investigations in the area of Mongun Tayga (Tyva Republic in Russian Federation, Lake Hyargas Nuur basin) suggest that precipitation decreased by 30% during LGM, but at the same time snow accumulation increased due to lower temperature in mountains. Thus, special conditions were provided for climate cryoaridization, when vegetation was degraded due to lowering precipitation, but lake-levels grew due to higher runoff from mountain ranges.

Impact of water drops on small targets

NASA Astrophysics Data System (ADS)

Rozhkov, A.; Prunet-Foch, B.; Vignes-Adler, M.

2002-10-01

The collision of water drops against small targets was studied experimentally by means of a high-speed photography technique. The drop impact velocity was about 3.5 m/s. Drop diameters were in the range of 2.8-4.0 mm. The target was a stainless steel disk of 3.9 mm diameter. The drop spread beyond the target like a central cap surrounded by a thin, slightly conical lamella bounded by a thicker rim. By mounting a small obstacle near the target, surface-tension driven Mach waves in the flowing lamella were generated, which are formally equivalent to the familiar compressibility driven Mach waves in gas dynamics. From the measurement of the Mach angle, the values of some flow parameters could be obtained as functions of time, which provided insight into the flow structure. The liquid flowed from the central cap to the liquid rim through the thin lamella at constant momentum flux. At a certain stage of the process, most of the liquid accumulated in the rim and the internal part of the lamella became metastable. In this situation, a rupture wave propagating through the metastable internal part of the lamella caused the rim to retract while forming outwardly directed secondary jets. The jets disintegrated into secondary droplets due to the Savart-Plateau-Rayleigh instability. Prior to the end of the retraction, an internal circular wave of rupture was formed. It originated at the target and then it propagated to meet the retracting rim. Their meeting resulted in a crown of tiny droplets. A theoretical analysis of the ejection process is proposed.

Small bowel obstruction due to phytobezoar formation within meckel diverticulum: CT findings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Frazzini, V.I. Jr.; English, W.J.; Bashist, B.

1996-05-01

Intestinal obstruction due to a phytobezoar within a Meckel diverticulum is exceedingly rare, with only seven reported cases in the surgical literature. The most important precipitating factor is the ingestion of agents high in fiber and cellulose. Small bowel obstruction in all but one case was due to retrograde propagation of the bezoar into the small bowel lumen. We report the clinical and CT findings in such a patient following a vegetarian diet. 14 refs., 2 figs.

Development of novel small molecules for imaging and drug release

NASA Astrophysics Data System (ADS)

Cao, Yanting

Small organic molecules, including small molecule based fluorescent probes, small molecule based drugs or prodrugs, and smart multifunctional fluorescent drug delivery systems play important roles in biological research, drug discovery, and clinical practices. Despite the significant progress made in these fields, the development of novel and diverse small molecules is needed to meet various demands for research and clinical applications. My Ph.D study focuses on the development of novel functional molecules for recognition, imaging and drug release. In the first part, a turn-on fluorescent probe is developed for the detection of intracellular adenosine-5'-triphosphate (ATP) levels based on multiplexing recognitions. Considering the unique and complicated structure of ATP molecules, a fluorescent probe has been implemented with improved sensitivity and selectivity due to two synergistic binding recognitions by incorporating of 2, 2'-dipicolylamine (Dpa)-Zn(II) for targeting of phospho anions and phenylboronic acid group for cis-diol moiety. The novel probe is able to detect intracellular ATP levels in SH-SY5Y cells. Meanwhile, the advantages of multiplexing recognition design concept have been demonstrated using two control molecules. In the second part, a prodrug system is developed to deliver multiple drugs within one small molecule entity. The prodrug is designed by using 1-(2-nitrophenyl)ethyl (NPE) as phototrigger, and biphenol biquaternary ammonium as the prodrug. With controlled photo activation, both DNA cross-linking agents mechlorethamine and o-quinone methide are delivered and released at the preferred site, leading to efficient DNA cross-links formation and cell death. The prodrug shows negligible cytotoxicity towards normal skin cells (Hekn cells) with and without UV activation, but displays potent activity towards cancer cells (HeLa cells) upon UV activation. The multiple drug release system may hold a great potential for practical application. In the last part, a new photo-initiated fluorescent anticancer prodrug for DNA alkylating agent mechlorethamine releasing and monitoring has been developed. The theranostic prodrug consists a photolabile NPE group, an inactive form of mechlorethamine and a nonfluorescent coumarin in one small molecule. It is demonstrated that the prodrug shows negligible cytotoxicity towards normal skin cells (Hekn cells) with and without UV activation, while the original parent drug mechlorethamine can be photocontrol-released and induces effective DNA cross-linking activity. Importantly, the drug release progress can be conveniently monitored by the 'off-on' fluorescence enhancement in cells. Moreover, the selective prodrug is not only cell permeable but also nuclear permeable. Therefore, the prodrug serves as a promising drug delivery system for spatiotemporal control release and monitoring of an anticancer drug to obtain the optimal treatment efficacy.

Geomorphological characteristics of increased landslide activity in the Gudbrandsdalen valley, Norway

NASA Astrophysics Data System (ADS)

Heyerdahl, Håkon; Høydal, Øyvind

2016-04-01

The Gudbrandsdalen valley in Eastern Norway lies in a region where annual precipitation is generally low (down to 300 mm/year). The landslide activity has consequently historically been low, although the lower part of the valley sides generally is draped with thick layers of Quaternary deposits, primarily of glacial or glaciofluvial origin. The perception of natural hazards in the valley was previously primarily connected to flooding in the main river in the valley bottom during early summer, due to large discharges resulting from snowmelt in the mountainous regions west and east of the valley. However, several high-intensity events have changed the image of the region. Starting with a localized, but intense, landslide event in the Northern part of the valley in year 2008, two larger events covering almost the entire valley occurred in the years 2011 and 2013. A high number of landslides was triggered in all these events, including many flash floods and debris flows/debris slides in small and steep tributary rivers along the valley slopes. Landslide triggering covers different release mechanisms: In 2008, landslides were triggered without precipitation in not-frozen soil deposits without snow cover in the lower part of the valley. Groundwater flow through the permeable bedrock ("Otta schist") resulting from snow-melt in the elevated mountainous areas caused landslide triggering due to positive pore-water pressures forming at the bedrock surface below soil deposits, or at depressions in the terrain. Subsequent rainfall resulted in even more landslides being released. In later events (years 2011 and 2013) many landslides were caused by surface water taking new paths downslope, often due to man-made changes in existing waterways (typically poorly planned drainage solutions or new roads). Relatively small discharges in slopes with unconsolidated and easily erodible glacial deposits (typically lateral moraine) in many cases lead to small initial slides that down-slope developed into large erosional debris slides/floods of considerable size. Also along existing tributary rivers, the intense rainfall events resulted in flash-floods with heavy erosion and entrainment of deposits from the riverbed, including massive transport of trees. Also on open slopes a number of landslides were observed, assumedly triggered primarily by direct infiltration of rainfall, and possibly assisted by groundwater flow in underlying bedrock. Considerable damage to infrastructure and also dwellings has resulted from the events. A new approach has proved necessary to capture the risk elements connect to landslide and flood for this valley region when it comes to planning purposes. Among others, there is a need to consider the potential damage resulting from under-dimensioned culverts leading to complete failure of railroad or road embankments). Work is underway in order to improve the understanding of release mechanisms for typical landslides in the valley, which also will be highly relevant for other areas in Norway were similar natural hazards are encountered, and where climatic change may change the regional landslide activity.

The stabilization mechanism of titanium cluster

NASA Astrophysics Data System (ADS)

Sun, Houqian; Ren, Yun; Hao, Yuhua; Wu, Zhaofeng; Xu, Ning

2015-05-01

A systematic and comparative theoretical study on the stabilization mechanism of titanium cluster has been performed by selecting the clusters Tin (n=3, 4, 5, 7, 13, 15 and 19) as representatives in the framework of density-functional theory. For small clusters Tin (n=3, 4 and 5), the binding energy gain due to spin polarization is substantially larger than that due to structural distortion. For medium clusters Ti13 and Ti15, both have about the same contribution. For Tin (n=4, 5, 13 and 15), when the undistorted high symmetric structure with spin-polarization is changed into the lowest energy structure, the energy level spelling due to distortion fails to reverse the level order of occupied and unoccupied molecular orbital (MO) of two type spin states, the spin configuration remains unchanged. In spin restricted and undistorted high symmetric structure, d orbitals participate in the hybridization in MOs, usually by way of a less distorted manner, and weak bonds are formed. In contrast, d orbitals take part in the formation of MOs in the ground state structure, usually in a distorted manner, and strong covalent metallic bonds are formed.

Precision calculation of threshold πd scattering, πN scattering lengths, and the GMO sum rule

NASA Astrophysics Data System (ADS)

Baru, V.; Hanhart, C.; Hoferichter, M.; Kubis, B.; Nogga, A.; Phillips, D. R.

2011-12-01

We use chiral perturbation theory (ChPT) to calculate the πd scattering length with an accuracy of a few percent, including isospin-violating corrections in both the two- and three-body sectors. In particular, we provide the technical details of a recent letter (Baru et al., 2011) [1], where we used data on pionic deuterium and pionic hydrogen atoms to extract the isoscalar and isovector pion-nucleon scattering lengths a and a. We study isospin-breaking contributions to the three-body part of a due to mass differences, isospin violation in the πN scattering lengths, and virtual photons. This last class of effects is ostensibly infrared enhanced due to the smallness of the deuteron binding energy. However, we show that the leading virtual-photon effects that might undergo such enhancement cancel, and hence the standard ChPT counting provides a reliable estimate of isospin violation in a due to virtual photons. Finally, we discuss the validity of the Goldberger-Miyazawa-Oehme sum rule in the presence of isospin violation, and use it to determine the charged-pion-nucleon coupling constant.

Repeated Small Bowel Obstruction Caused by Chestnut Ingestion without the Formation of Phytobezoars.

PubMed

Satake, Ryu; Chinda, Daisuke; Shimoyama, Tadashi; Satake, Miwa; Oota, Rie; Sato, Satoshi; Yamai, Kiyonori; Hachimori, Hisashi; Okamoto, Yutaka; Yamada, Kyogo; Matsuura, Osamu; Hashizume, Tadashi; Soma, Yasushi; Fukuda, Shinsaku

2016-01-01

A small number of cases of small bowel obstruction caused by foods without the formation of phytobezoars have been reported. Repeated small bowel obstruction due to the ingestion of the same food is extremely rare. We present the case of 63-year-old woman who developed small bowel obstruction twice due to the ingestion of chestnuts without the formation of phytobezoars. This is the first reported case of repeated small bowel obstruction caused by chestnut ingestion. Careful interviews are necessary to determine the meal history of elderly patients and psychiatric patients.

Development of Multi-Field of view-Multiple-Scattering-Polarization Lidar ： analysis of angular resolved backscattered signals

NASA Astrophysics Data System (ADS)

Makino, T.; Okamoto, H.; Sato, K.; Tanaka, K.; Nishizawa, T.; Sugimoto, N.; Matsui, I.; Jin, Y.; Uchiyama, A.; Kudo, R.

2014-12-01

We have developed a new type of ground-based lidar, Multi-Field of view-Multiple-Scattering-Polarization Lidar (MFMSPL), to analyze multiple scattering contribution due to low-level clouds. One issue of the ground based lidar is the limitation of optical thickness of about 3 due to the strong attenuation in the lidar signals so that only the cloud bottom part can be observed. In order to overcome the problem, we have proposed the MFMSPL that has been designed to observe similar degree of multiple scattering contribution expected from space-borne lidar CALIOP on CALIPSO satellite. The system consists of eight detectors; four telescopes for parallel channels and four for perpendicular channels. The four pairs of telescope have been mounted with four different off-beam angles, ranging from -5 to 35mrad, where the angle is defined as the one between the direction of laser beam and the direction of telescope. Consequently, similar large foot print (100m) as CALIOP can be achieved in the MFMSPL observations when the altitude of clouds is located at about 1km. The use of multi-field of views enables to measure depolarization ratio from optically thick clouds. The outer receivers attached with larger angles generally detect backscattered signals from clouds located at upper altitudes due to the enhanced multiple scattering compared with the inner receiver that detects signals only from cloud bottom portions. Therefore the information of cloud microphysics from optically thicker regions is expected by the MFMSPL observations compared with the conventional lidar with small FOV. The MFMSPL have been continuously operated in Tsukuba, Japan since June 2014.Initial analyses have indicated expected performances from the theoretical estimation by backward Monte-Carlo simulations. The depolarization ratio from deeper part of the clouds detected by the receiver with large off-beam angle showed much larger values than those from the one with small angle. The calibration procedures and summary of initial observations will be presented. The observed data obtained by the MFMSPL will be used to develop and evaluate the retrieval algorithms for cloud microphysics applied to the CALIOP data.

The gross anatomy of the male reproductive system of the European hedgehog (Erinaceus Europaeus).

PubMed

Akbari, G; Babaei, M; Kianifard, D; Mohebi, D

2018-01-01

Hedgehogs are small spiny-coated insectivores. Due to their low body weight, calm character, and easy maintenance, they are kept as pets. It is therefore worthwhile to care about hedgehogs' health problems and to provide pet owners with information about their reproduction. Moreover, it is necessary to be familiar with their anatomy so as to satisfy the need to improve nutrition and medical care, even surgery. This study was carried out on five adult male European hedgehogs euthanased in a chloroform chamber. The European hedgehog's oval testes are invisible in inguinal region because they have no true scrotal sac. The testes are located in the craniocaudal direction with dorsolateral epididymal attachments. The vesicular glands, the European hedgehog's largest accessory sex glands, are lobulated structures containing dorsomedial and ventrolateral parts on each side. The prostate is an oval gland with right and left lobes. The paired bulbourethral glands are laid on the ischiocavernosus muscle. Histologically the vesicular, prostate gland ducts and ductus deferens as well as urethra separately were discharged in a diverticlum at the level of the pelvic urethra end. A sigmoid flexure exists in the proximal part of shaft body of the penis. There are two retractor penile muscles. In dorsal end of the penile glans, there is a small urethral process with two nail- -like, needle-shaped structures. They are on both sides of the urethral process. Furthermore, there are two intromittent sacs (Sacculus urethralis) in the ventral part of the end of the penis. (Folia Morphol 2018; 77, 1: 36-43).

A Revised Total Coliform Rule Guide for Small Public Water Systems

EPA Pesticide Factsheets

This document aims to assist small water systems serving 1,000 persons with fewer in complying with the requirements of the Revised Total Coliform Rule (RTCR). It is divided into four parts, Parts A, B, C and D.

Inhibition of starch digestion by the green tea polyphenol, (−)-epigallocatechin-3-gallate

PubMed Central

Forester, Sarah C.; Gu, Yeyi; Lambert, Joshua D.

2013-01-01

Scope Green tea has been shown to ameliorate symptoms of metabolic syndrome in vivo. The effects could be due, in part, to modulation of postprandial blood glucose levels. Methods and results We examined the effect of coadministration of (−)-epigallocatechin-3-gallate (EGCG, 100 mg/kg, i.g.) on blood glucose levels following oral administration of common corn starch (CCS), maltose, sucrose, or glucose to fasted CF-1 mice. We found that cotreatment with EGCG significantly reduced postprandial blood glucose levels after administration of CCS compared to control mice (50 and 20% reduction in peak blood glucose levels and blood glucose area under the curve, respectively). EGCG had no effect on postprandial blood glucose following administration of maltose or glucose, suggesting that EGCG may modulate amylase-mediated starch digestion. In vitro, EGCG noncompetitively inhibited pancreatic amylase activity by 34% at 20 μM. No significant change was induced in the expression of two small intestinal glucose transporters (GLUT2 and SGLT1). Conclusions Our results suggest that EGCG acutely reduces postprandial blood glucose levels in mice when coadministered with CCS and this may be due in part to inhibition of α-amylase. The relatively low effective dose of EGCG makes a compelling case for studies in human subjects. PMID:23038646

Lipocalin 2 functions as a negative regulator of red blood cell production in an autocrine fashion.

PubMed

Miharada, Ken-ichi; Hiroyama, Takashi; Sudo, Kazuhiro; Nagasawa, Toshiro; Nakamura, Yukio

2005-11-01

Members of the lipocalin protein family are typically small, secreted proteins that possess a variety of functions. Although the physiological role of lipocalin 2 remains to be fully elucidated, a few pivotal functions have recently been reported, e.g., regulation of the apoptosis of leukocytes. Unexpectedly, lipocalin 2 is abundantly expressed in erythroid progenitor cells. An in vitro culture experiment demonstrated that lipocalin 2 induces apoptosis and inhibits differentiation of erythroid progenitor cells. During acute anemia the expression of lipocalin 2 was reduced in erythroid cells by a feedback system. Furthermore, injection of recombinant lipocalin 2 into mice suffering from acute anemia retarded the recovery of red blood cell (RBC) numbers, suggesting the importance of reduced expression of lipocalin 2 for the efficient recovery of RBC numbers. These results indicate that lipocalin 2 suppresses RBC production in an autocrine fashion. Hence, anemia arising from pathological conditions, such as chronic inflammation, might be partly due to increased levels of lipocalin 2 secreted from expanded leukocytes and/or macrophages. Also, anemia arising from malignancies might be partly due to the abundant secretion of lipocalin 2 from tumor cells. Thus, lipocalin 2 may represent an attractive therapeutic target for anemia under certain pathological conditions.

Accelerating proof of concept for small molecule drugs using solid-state chemistry.

PubMed

Byrn, Stephen R; Zografi, George; Chen, Xiaoming Sean

2010-09-01

In this perspective we have shown that the process of "proof of concept" (POC) in the early part of drug development can be greatly accelerated by close attention to the underlying solid-state chemistry (SSC) of a new chemical entity. POC seeks data that provide confidence in the therapeutic activity and safety of a new chemical entity, which can rapidly lead to a key "GO/NO-GO" decision point for further development. Due to the high cost of the development of new chemical entities and the current low overall productivity of obtaining successful candidates, the pharmaceutical industry is being required to develop accelerated POC strategies. The success of accelerated approaches to POC depends on a full understanding of the SSC of drugs in relation to solubility and stability. Dissolution-limited absorption due to poor solubility of drug substances is particularly important because it can lead to low exposure in animals and undesired bioavailability in humans. Choosing a desirable solid form with sufficient solubility and acceptable stability is essential in developing formulations for POC with superior quality. In this perspective we present an approach that utilizes SSC as part of a novel 2-year development strategy for reaching the pivotal clinical trial stage of development.

Flea and Small Mammal Species Composition in Mixed-Grass Prairies: Implications for the Maintenance of Yersinia pestis.

PubMed

Maestas, Lauren P; Britten, Hugh B

2017-07-01

Maintenance of sylvatic plague in prairie dogs (Cynomis spp.) was once thought unlikely due to high mortality rates; yet more recent findings indicate that low-level enzootic plague may be maintained in susceptible prairie dog populations. Another hypothesis for the maintenance of sylvatic plague involves small mammals, other than prairie dogs, as an alternative reservoir in the sylvatic plague system. These hypotheses, however, are not mutually exclusive, as both prairie dogs and small mammals could together be driving sylvatic cycles of plague. The concept of a bridging vector has been used to explain the transmission of pathogens from one host species to another. In the case of sylvatic plague, this would require overlap in fleas between small mammals and prairie dogs, and potentially other species such as carnivores. Our goal was to evaluate the level of flea sharing between black-tailed prairie dogs (Cynomis ludovicianus) and other small mammals in a mixed-grass prairie in South Dakota. We investigated the species richness of small mammals and small-mammal fleas in a mixed-grass prairie system and compared findings with previous studies from a short-grass ecosystem in Colorado. Over the summer field seasons 2014-2016 we live-trapped small mammals, collected fleas, and showed differences between both the flea and small mammal composition of the two systems. We also recorded higher densities of deer mice and lower densities of northern grasshopper mice in mixed versus shortgrass prairies. We confirmed, as is the case in shortgrass prairies, a lack of substantial flea species overlap on small mammal hosts and fleas from prairie dogs and their burrows. Moreover this study demonstrates that although small mammals may not play a large part in interepizootic plague cycling in shortgrass prairie ecosystems, their role in mixed-grass prairies requires further evaluation.

You can count on the motor cortex: finger counting habits modulate motor cortex activation evoked by numbers.

PubMed

Tschentscher, Nadja; Hauk, Olaf; Fischer, Martin H; Pulvermüller, Friedemann

2012-02-15

The embodied cognition framework suggests that neural systems for perception and action are engaged during higher cognitive processes. In an event-related fMRI study, we tested this claim for the abstract domain of numerical symbol processing: is the human cortical motor system part of the representation of numbers, and is organization of numerical knowledge influenced by individual finger counting habits? Developmental studies suggest a link between numerals and finger counting habits due to the acquisition of numerical skills through finger counting in childhood. In the present study, digits 1 to 9 and the corresponding number words were presented visually to adults with different finger counting habits, i.e. left- and right-starters who reported that they usually start counting small numbers with their left and right hand, respectively. Despite the absence of overt hand movements, the hemisphere contralateral to the hand used for counting small numbers was activated when small numbers were presented. The correspondence between finger counting habits and hemispheric motor activation is consistent with an intrinsic functional link between finger counting and number processing. Copyright © 2011 Elsevier Inc. All rights reserved.

Providing library services in a time of fiscal crisis: alternatives.

PubMed Central

Cheshier, R G

1977-01-01

The nature of the fiscal crisis in health science libraries in the United States is in part due to the style of management in these libraries, in part due to the lack of user identification, in part due to the lack of economically valid fees for service, and in part due to the success of the Biomedical Communications Network. These issues are discussed in terms of how they might be approached. A pragmatic stance is advocated for practitioners, the MLA, the NLM, and library schools to jointly address the questions raised. PMID:901951

77 FR 72702 - Small Business Size Standards: Information

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG26 Small Business Size Standards: Information AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the receipts based small business size standards for 15...

The Effect of Boiling on Seismic Properties of Water-Saturated Fractured Rock

NASA Astrophysics Data System (ADS)

Grab, Melchior; Quintal, Beatriz; Caspari, Eva; Deuber, Claudia; Maurer, Hansruedi; Greenhalgh, Stewart

2017-11-01

Seismic campaigns for exploring geothermal systems aim at detecting permeable formations in the subsurface and evaluating the energy state of the pore fluids. High-enthalpy geothermal resources are known to contain fluids ranging from liquid water up to liquid-vapor mixtures in regions where boiling occurs and, ultimately, to vapor-dominated fluids, for instance, if hot parts of the reservoir get depressurized during production. In this study, we implement the properties of single- and two-phase fluids into a numerical poroelastic model to compute frequency-dependent seismic velocities and attenuation factors of a fractured rock as a function of fluid state. Fluid properties are computed while considering that thermodynamic interaction between the fluid phases takes place. This leads to frequency-dependent fluid properties and fluid internal attenuation. As shown in a first example, if the fluid contains very small amounts of vapor, fluid internal attenuation is of similar magnitude as attenuation in fractured rock due to other mechanisms. In a second example, seismic properties of a fractured geothermal reservoir with spatially varying fluid properties are calculated. Using the resulting seismic properties as an input model, the seismic response of the reservoir is then computed while the hydrothermal structure is assumed to vary over time. The resulting seismograms demonstrate that anomalies in the seismic response due to fluid state variability are small compared to variations caused by geological background heterogeneity. However, the hydrothermal structure in the reservoir can be delineated from amplitude anomalies when the variations due to geology can be ruled out such as in time-lapse experiments.

40 CFR Table 2 to Subpart Jjj of... - Class I Emission Limits for Existing Small Municipal Waste Combustion Limits

Code of Federal Regulations, 2010 CFR

2010-07-01

... Small Municipal Waste Combustion Limits 2 Table 2 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 2 Table 2 to Subpart JJJ of Part 62—Class I Emission Limits for Existing Small Municipal Waste Combustion Limits ER31JA03.006...

40 CFR Table 4 to Subpart Jjj of... - Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa

Code of Federal Regulations, 2010 CFR

2010-07-01

... Small Municipal Waste Combustion Unitsa 4 Table 4 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 4 Table 4 to Subpart JJJ of Part 62—Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa ER31JA03.009...

40 CFR Table 4 to Subpart Jjj of... - Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa

Code of Federal Regulations, 2014 CFR

2014-07-01

... Small Municipal Waste Combustion Unitsa 4 Table 4 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 4 Table 4 to Subpart JJJ of Part 62—Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa ER31JA03.009...

40 CFR Table 2 to Subpart Jjj of... - Class I Emission Limits for Existing Small Municipal Waste Combustion Limits

Code of Federal Regulations, 2013 CFR

2013-07-01

... Small Municipal Waste Combustion Limits 2 Table 2 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 2 Table 2 to Subpart JJJ of Part 62—Class I Emission Limits for Existing Small Municipal Waste Combustion Limits ER31JA03.006...

40 CFR Table 2 to Subpart Jjj of... - Class I Emission Limits for Existing Small Municipal Waste Combustion Limits

Code of Federal Regulations, 2011 CFR

2011-07-01

... Small Municipal Waste Combustion Limits 2 Table 2 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 2 Table 2 to Subpart JJJ of Part 62—Class I Emission Limits for Existing Small Municipal Waste Combustion Limits ER31JA03.006...

40 CFR Table 4 to Subpart Jjj of... - Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa

Code of Federal Regulations, 2011 CFR

2011-07-01

... Small Municipal Waste Combustion Unitsa 4 Table 4 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 4 Table 4 to Subpart JJJ of Part 62—Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa ER31JA03.009...

40 CFR Table 2 to Subpart Jjj of... - Class I Emission Limits for Existing Small Municipal Waste Combustion Limits

Code of Federal Regulations, 2012 CFR

2012-07-01

... Small Municipal Waste Combustion Limits 2 Table 2 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 2 Table 2 to Subpart JJJ of Part 62—Class I Emission Limits for Existing Small Municipal Waste Combustion Limits ER31JA03.006...

40 CFR Table 4 to Subpart Jjj of... - Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa

Code of Federal Regulations, 2013 CFR

2013-07-01

... Small Municipal Waste Combustion Unitsa 4 Table 4 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 4 Table 4 to Subpart JJJ of Part 62—Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa ER31JA03.009...

40 CFR Table 2 to Subpart Jjj of... - Class I Emission Limits for Existing Small Municipal Waste Combustion Limits

Code of Federal Regulations, 2014 CFR

2014-07-01

... Small Municipal Waste Combustion Limits 2 Table 2 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 2 Table 2 to Subpart JJJ of Part 62—Class I Emission Limits for Existing Small Municipal Waste Combustion Limits ER31JA03.006...

40 CFR Table 4 to Subpart Jjj of... - Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa

Code of Federal Regulations, 2012 CFR

2012-07-01

... Small Municipal Waste Combustion Unitsa 4 Table 4 to Subpart JJJ of Part 62 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Pt. 62, Subpt. JJJ, Table 4 Table 4 to Subpart JJJ of Part 62—Class II Emission Limits for Existing Small Municipal Waste Combustion Unitsa ER31JA03.009...

Intratumoral histologic heterogeneity of gliomas. A quantitative study.

PubMed

Paulus, W; Peiffer, J

1989-07-15

Quantitative data for intratumoral histologic heterogeneity were obtained by investigating ten small and ten large punched samples from 50 unembedded supratentorial gliomas. The 1000 samples were diagnosed according to the World Health Organization (WHO) classification and six histopathologic features associated with malignancy were evaluated (cellular density, nuclear pleomorphism, necroses, histologic architecture, vessels, and mitoses), each with defined gradations. The slides were read independently by two observers. The initially high interobserver variability (grade, 22.2%; type, 10.3%; and tumor presence/absence, 7.1%) was for the most part due to intermediate grades and types and was reduced to 1.7% after mutual review. Small samples showed lower mean grade than large samples and more often absence of tumor (7.6% versus 2.4%). Of all gliomas, 48% showed differently typed samples, 82% differently graded samples, and 62% benign and malignant grades. Intratumoral heterogeneity was higher for the necroses than for the other histopathologic features. Our results underscore the importance of extensive tissue sampling.

Agnosia for mirror stimuli: a new case report with a small parietal lesion.

PubMed

Martinaud, Olivier; Mirlink, Nicolas; Bioux, Sandrine; Bliaux, Evangéline; Lebas, Axel; Gerardin, Emmanuel; Hannequin, Didier

2014-11-01

Only seven cases of agnosia for mirror stimuli have been reported, always with an extensive lesion. We report a new case of an agnosia for mirror stimuli due to a circumscribed lesion. An extensive battery of neuropsychological tests and a new experimental procedure to assess visual object mirror and orientation discrimination were assessed 10 days after the onset of clinical symptoms, and 5 years later. The performances of our patient were compared with those of four healthy control subjects matched for age. This test revealed an agnosia for mirror stimuli. Brain imaging showed a small right occipitoparietal hematoma, encompassing the extrastriate cortex adjoining the inferior parietal lobe. This new case suggests that: (i) agnosia for mirror stimuli can persist for 5 years after onset and (ii) the posterior part of the right intraparietal sulcus could be critical in the cognitive process of mirror stimuli discrimination. © The Author 2014. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Direct Cast U-6Nb – 2017 Progress on Cylindrical Castings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aikin, Jr., Robert M.

2017-10-04

This report describes work to further develop a sound technical basis and best practices for mold design and process parameters for the Direct Casting of U-6wt%Nb components. One major challenge to the production of U-6Nb components is the propensity for niobium segregation during casting and solidification. This is especially true for cylindrical castings where the vertical side walls allow flotation of Nb resulting in severe inverse macrosegregation. In this work, a small (120 mm diameter by 180 mm tall) and large cylinder (250 mm diameter by 310 mm tall) are examined with a focus on reducing, or eliminating, niobium segregation.more » It is demonstrated that counter gravity casting (top-to-bottom solidification) can be used to minimize segregation in the small cylinder. Attempts to counter gravity cast the large cylinder were unsuccessful, in large part due to size limitations of the current furnace. A path forward for casting of the large cylinders is discussed.« less

Future scenarios for energy consumption and carbon emissions due to demographic transitions in Chinese households

NASA Astrophysics Data System (ADS)

Yu, Biying; Wei, Yi-Ming; Kei, Gomi; Matsuoka, Yuzuru

2018-02-01

Population dynamics has been acknowledged as a key concern for projecting future emissions, partly because of the huge uncertainties related to human behaviour. However, the heterogeneous shifts of human behaviour in the process of demographic transition are not well explored when scrutinizing the impacts of population dynamics on carbon emissions. Here, we expand the existing population-economy-environment analytical structure to address the above limitations by representing the trend of demographic transitions to small-family and ageing society. We specifically accommodate for inter- and intra-life-stage variations in time allocation and consumption in the population rather than assuming a representative household, and take a less developed province, Sichuan, in China as the empirical context. Our results show that the demographic shift to small and ageing households will boost energy consumption and carbon emissions, driven by the joint variations in time-use and consumption patterns. Furthermore, biased pictures of changing emissions will emerge if the time effect is disregarded.

In Situ Manufacturing is a Necessary Part of Any Planetary Architecture

NASA Technical Reports Server (NTRS)

Edmunson, Jennifer E.; McLemore, Carole A.

2012-01-01

The key to any sustainable presence in space is the ability to manufacture necessary tools, parts, structures, spares, etc. in situ and on demand. Cost, volume, and up-mass constraints prohibit launching everything needed for long-duration or long-distance missions from Earth, including spare parts and replacement systems. There are many benefits to building items as-needed in situ using computer aided drafting (CAD) models and additive manufacturing technology: (1) Cost, up-mass, and volume savings for launch due to the ability to manufacture specific parts when needed. (2) CAD models can be generated on Earth and transmitted to the station or spacecraft, or they can be designed in situ for any task. Thus, multiple people in many locations can work on a single problem. (3) Items can be produced that will enhance the safety of crew and vehicles (e.g., latches or guards). (4) Items can be produced on-demand in a small amount of time (i.e., hours or days) compared to traditional manufacturing methods and, therefore, would not require the lengthy amount of time needed to machine the part from a solid block of material nor the wait time required if the part had to be launched from Earth. (5) Used and obsolete parts can be recycled into powder or wire feedstock for use in later manufacturing. (6) Ultimately, the ability to produce items as-needed will reduce mission risk, as one will have everything they need to fix a broken system or fashion a new part making it available on a more timely basis.

Damage in gamma titanium aluminides due to small particle impacts

NASA Astrophysics Data System (ADS)

Stief, P. S.; Rubal, M. P.; Gray, G. T., III; Pereiras, J. M.

1998-10-01

Initiation of cracking due to small particle impacts on low ductility intermetallics is investigated experimentally and theoretically. The gamma titanium aluminide alloys of interest which are being considered for elevated temperature structural applications in aircraft engines exhibit tensile ductilities on the order of 1-2%. Cracking due to any source, including small particle impacts, is of concern given the rapid growth of cracks in fatigue. This investigation focuses on a model geometry which reproduces the rear face cracking that is induced by a small particle impinging on an air foil leading edge. Small steel spheres are projected onto thin plates at velocities ranging from 76 to 305 ms ; cracking is thereby induced on the rear surface of the plates. Through finite element analyses of the dynamic impact event and some analytical estimates, we examine the hypothesis that crack initiation due to small particle impacts can be correlated with material ductility and with the severity and spatial extent of the straining during the impact event. In addition, with the use of static indentation tests in which similar strain distributions are present, some insight is gained into the difference in ductility between high and low strain rates. 1998 Elsevier Science Ltd.

78 FR 59798 - Small Business Subcontracting: Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 125 RIN 3245-AG22 Small Business Subcontracting: Correction AGENCY: U.S. Small Business Administration. ACTION: Correcting amendments. SUMMARY: This document... business subcontracting to implement provisions of the Small Business Jobs Act of 2010. This correction...

75 FR 61597 - Small Business Size Standards: Retail Trade

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AF69 Small Business Size Standards: Retail Trade AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is modifying 47 small business size standards for industries in North...

75 FR 61591 - Small Business Size Standards; Other Services.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-06

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AF70 Small Business Size Standards; Other Services. AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the small business size standards for 18 industries in North...

76 FR 61626 - Small Business Subcontracting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-05

... SMALL BUSINESS ADMINISTRATION 13 CFR Parts 121 and 125 RIN 3245-AG22 Small Business Subcontracting AGENCY: U.S. Small Business Administration. ACTION: Proposed rule. SUMMARY: The U.S. Small Business... Business Jobs Act of 2010, which pertain to small business subcontracting. SBA is proposing to amend its...

Detection of longitudinal ulcer using roughness value for computer aided diagnosis of Crohn's disease

NASA Astrophysics Data System (ADS)

Oda, Masahiro; Kitasaka, Takayuki; Furukawa, Kazuhiro; Watanabe, Osamu; Ando, Takafumi; Goto, Hidemi; Mori, Kensaku

2011-03-01

The purpose of this paper is to present a new method to detect ulcers, which is one of the symptoms of Crohn's disease, from CT images. Crohn's disease is an inflammatory disease of the digestive tract. Crohn's disease commonly affects the small intestine. An optical or a capsule endoscope is used for small intestine examinations. However, these endoscopes cannot pass through intestinal stenosis parts in some cases. A CT image based diagnosis allows a physician to observe whole intestine even if intestinal stenosis exists. However, because of the complicated shape of the small and large intestines, understanding of shapes of the intestines and lesion positions are difficult in the CT image based diagnosis. Computer-aided diagnosis system for Crohn's disease having automated lesion detection is required for efficient diagnosis. We propose an automated method to detect ulcers from CT images. Longitudinal ulcers make rough surface of the small and large intestinal wall. The rough surface consists of combination of convex and concave parts on the intestinal wall. We detect convex and concave parts on the intestinal wall by a blob and an inverse-blob structure enhancement filters. A lot of convex and concave parts concentrate on roughed parts. We introduce a roughness value to differentiate convex and concave parts concentrated on the roughed parts from the other on the intestinal wall. The roughness value effectively reduces false positives of ulcer detection. Experimental results showed that the proposed method can detect convex and concave parts on the ulcers.

Impact crater outflows on Venus: Morphology and emplacement mechanisms

USGS Publications Warehouse

Chadwick, D. John; Schaber, Gerald G.

1993-01-01

Many of the 932 impact craters discovered by the Magellan spacecraft at Venus are associated with lobate flows that originate at or near the crater rim. They extend for several to several hundred kilometers from the crater, and they commonly have a strong radar backscatter. A morphologic study of all identifiable crater outflows on Venus has revealed that many individual flows each consist of two areas, defined by distinct morphologic features. These two areas appear to represent two stages of deposition for each flow. The part of the flow that is generally deposited closest to the crater tends to be on the downrange side of the crater, flows in the downrange direction, and it is interpreted to be a late-stage ejecta. In many cases, this proximal part of the flow is too thin to completely bury the large blocks in subjacent ejecta deposits. Dendritic channels, present in many proximal flows, appear to have drained liquid from the proximal part in the downhill direction, and they debouch to feed the outer part of the flows. This distal part flows downhill, fills small grabens, and is ponded by ridges, behavior that mimics that of volcanic lava flows. The meandering and dendritic channels and the relation of the distal flows to topography strongly suggest that the distal portion is the result of coalescence and slow drainage of impact melt from the proximal portion. Impact melt forms a lining to the transient crater and mixes turbulently with solid clasts, and part of this mixture may be ejected to form the proximal part of the flow during the excavation stage of crater development. A statistical study of the Venusian craters has revealed that, in general, large craters produced by impacts with relatively low incidence angles to the surface are more likely to produce flows than small craters produced by higher-angle impacts. The greater flow production and downrange focusing of the proximal flows with decreasing incidence angle indicate a strong control of the flows by the impactor flight direction, and a high downrange velocity imparted to the proximal flow material in lower angle impacts. On the Moon, small flows interpreted to be composed of impact melt are observed atop the ejecta of large, fresh craters; on Earth, melt-rich suevite deposits form the uppermost layer of ejecta of some fresh craters. These features, albeit much smaller, may be analogous to the flows on Venus. Numerical models have predicted that larger volumes of impact melt would be produced on Venus than on the cooler terrestrial bodies due to high atmospheric and target temperatures, perhaps 3 times the volume produced on the Moon for a given crater diameter.

Assessment of Executive Function in Preschool-Aged Children

ERIC Educational Resources Information Center

Isquith, Peter K.; Crawford, Jennifer S.; Espy, Kimberly Andrews; Gioia, Gerard A.

2005-01-01

Assessment of the overarching self-regulatory mechanisms, or executive functions, in any age group is challenging, in part due to the complexity of this domain, in part due to their dynamic essence, and in part due to the inextricable links between these central processes and the associated domain-specific processes, such as language, motor…

75 FR 9129 - Small Business, Small Disadvantaged Business, HUBZone, and Service-Disabled Veteran-Owned Protest...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... SMALL BUSINESS ADMINISTRATION 13 CFR Parts 121, 124, 125, 126, and 134 RIN 3245-AF65 Small Business, Small Disadvantaged Business, HUBZone, and Service-Disabled Veteran-Owned Protest and Appeal Regulations AGENCY: U.S. Small Business Administration. ACTION: Proposed rule. SUMMARY: The U.S. Small...

16 CFR 1020.2 - What is the definition of “small business”?

Code of Federal Regulations, 2012 CFR

2012-01-01

...? 1020.2 Section 1020.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL SMALL BUSINESS § 1020.2 What is the definition of “small business”? As used in this part, the term small business means any entity that is either a small business, small organization, or small governmental jurisdiction, as...

16 CFR 1020.2 - What is the definition of “small business”?

Code of Federal Regulations, 2014 CFR

2014-01-01

...? 1020.2 Section 1020.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL SMALL BUSINESS § 1020.2 What is the definition of “small business”? As used in this part, the term small business means any entity that is either a small business, small organization, or small governmental jurisdiction, as...

16 CFR 1020.2 - What is the definition of “small business”?

Code of Federal Regulations, 2011 CFR

2011-01-01

...? 1020.2 Section 1020.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL SMALL BUSINESS § 1020.2 What is the definition of “small business”? As used in this part, the term small business means any entity that is either a small business, small organization, or small governmental jurisdiction, as...

Temperature of Heating and Cooling of Massive, Thin, and Wedge-Shaped Plates from Hard-to-Machine Steels During Their Grinding

NASA Astrophysics Data System (ADS)

Dement‧ev, V. B.; Ivanova, T. N.; Dolginov, A. M.

2017-01-01

Grinding of flat parts occurs by solid abrasive particles due to the physicomechanical process of deformation and to the action of a process liquid at high temperatures in a zone small in volume and difficult for observation. The rate of heating and cooling depends on the change in the intensity of the heat flux and in the velocity and time of action of the heat source. A study has been made of the regularities of the influence of each of these parameters on the depth and character of structural transformations during the grinding of flat parts from hard-to-machine steels. A procedure to calculate temperature in grinding massive, thin, and wedge-shaped parts has been developed with account taken of the geometric and thermophysical parameters of the tool and the treated part, and also of cutting regimes. The procedure can be used as a constituent part in developing a system for automatic design of the technological process of grinding of flat surfaces. A relationship between the temperature in the grinding zone and the regimes of treatment has been established which makes it possible to control the quality of the surface layer of massive, thin, and wedge-shaped plates from hard-to-machine steels. The rational boundaries of shift of cutting regimes have been determined.

Development of a Crush and Mix Machine for Composite Brick Fabrication

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sothea, Kruy; Fazli, Nik; Hamdi, M.

2011-01-17

Currently, people are more and more concerned about the environmental protection. Municipal solid wastes (MSW) have bad effect on the environment and also human health. In addition, the amounts of municipal solid wastes are increasing due to the economic development, density of population, especially in the developing countries and they are recycled in a little percentage. To address this problem, the composite brick forming machine was designed and developed to make brick using combination of MSW and mortar. The machine consists of two independent parts, crusher and mixer part, and molding part. This paper explores the design of crusher andmore » mixer part. The crusher has ability to cut MSW such as wood, paper and plastic into small size. There are two mixers; one is used for making mortar and other use for making slurry. FEA analyses were carried out to address the suitable strength of the critical parts of the crusher which ensures that crusher can run properly with high efficiency. The experimentation of the crusher shows that it has high performance for cutting MSW. The mixers also work very well in high efficiency. The results of composite brick testing have been shown that ability of the machine can performance well. This is the innovation of crush and mix machine which is portable and economic by using MSW in replacement of sand.« less

Development of a Crush and Mix Machine for Composite Brick Fabrication

NASA Astrophysics Data System (ADS)

Sothea, Kruy; Fazli, Nik; Hamdi, M.; Aoyama, Hideki

2011-01-01

Currently, people are more and more concerned about the environmental protection. Municipal solid wastes (MSW) have bad effect on the environment and also human health. In addition, the amounts of municipal solid wastes are increasing due to the economic development, density of population, especially in the developing countries and they are recycled in a little percentage. To address this problem, the composite brick forming machine was designed and developed to make brick using combination of MSW and mortar. The machine consists of two independent parts, crusher and mixer part, and molding part. This paper explores the design of crusher and mixer part. The crusher has ability to cut MSW such as wood, paper and plastic into small size. There are two mixers; one is used for making mortar and other use for making slurry. FEA analyses were carried out to address the suitable strength of the critical parts of the crusher which ensures that crusher can run properly with high efficiency. The experimentation of the crusher shows that it has high performance for cutting MSW. The mixers also work very well in high efficiency. The results of composite brick testing have been shown that ability of the machine can performance well. This is the innovation of crush and mix machine which is portable and economic by using MSW in replacement of sand.

Origin of spin reorientation transitions in antiferromagnetic MnPt-based alloys

NASA Astrophysics Data System (ADS)

Chang, P.-H.; Zhuravlev, I. A.; Belashchenko, K. D.

2018-04-01

Antiferromagnetic MnPt exhibits a spin reorientation transition (SRT) as a function of temperature, and off-stoichiometric Mn-Pt alloys also display SRTs as a function of concentration. The magnetocrystalline anisotropy in these alloys is studied using first-principles calculations based on the coherent potential approximation and the disordered local moment method. The anisotropy is fairly small and sensitive to the variations in composition and temperature due to the cancellation of large contributions from different parts of the Brillouin zone. Concentration and temperature-driven SRTs are found in reasonable agreement with experimental data. Contributions from specific band-structure features are identified and used to explain the origin of the SRTs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, K.M.; Al-Jassim, M.M.; Williamson, D.L.

Over the last two decades extensive studies on the optical and electrical properties of hydrogenated amorphous Si (a-Si:H) have been reported. However, less attention was given to the structural characterization of this material partly due to the insensitivity to hydrogen of structural probes such as x-rays and electron diffraction. From a recent set of experiments, results on the solubility limit of hydrogen in a special type of a-Si:H and the characterization of hydrogen induced complexes or nanobubbles has been reported. In this study, we report TEM observations of the structural morphology of hydrogen related defects that support these recent measurementsmore » obtained by secondary ion mass spectrometry (SIMS) and small-angle x-ray scattering (SAXS).« less

An Unusual Case of White Piedra Due to Trichosporon inkin Mimicking Trichobacteriosis.

PubMed

Zhuang, Kaiwen; Ran, Xin; Dai, Yaling; Tang, Jiaoqing; Yang, Qin; Pradhan, Sushmita; Ran, Yuping

2016-12-01

White piedra is a superficial mycosis characterized by soft, white-to-tan, irregular nodules attached to the hair shafts. A 36-year-old man presented with small lumps in his pubic hair, without any other symptoms. The clinical features were suggestive of trichobacteriosis. Pathology analysis of the infected hair revealed that the concretions surrounding the hair shaft were full of fungal elements, parts of which had invaded into the cuticle. Culture on Sabouraud dextrose agar grew creamy, yellow-white colonies identified as Trichosporon inkin by the sequence of the nuclear ribosomal intergenic spacer region. The condition was treated by shaving the pubic hair and administering antifungal therapy (oral itraconazole and topical ketoconazole).

Magnetic Fano resonances by design in symmetry broken THz meta-foils

PubMed Central

Wu, Jianfeng; Moser, Herbert O.; Li, Rujiang; Yang, Yihao; Jing, Liqiao; Chen, Hongsheng; Breese, Mark B. H.

2017-01-01

Magnetic Fano resonances in there-dimensional symmetry broken meta-foils at THz frequencies are theoretically and experimentally studied. Sharp Fano resonances occur due to the interference between different resonances and can be designed by choosing geometric parameters of the meta-foil. At the Fano resonances, the meta-foil supports antisymmetric modes, whereas, at the main resonance, only a symmetric mode exists. The meta-foil is left-handed at the Fano resonances and shows sharp peaks of the real part of the refractive index in transmission with small effective losses opening a way to very sensitive high-speed sensing of dielectric changes in the surrounding media and of mechanical configuration. PMID:28150797

A distribution benefits model for improved information on worldwide crop production. Volume 2: Application to various crops

NASA Technical Reports Server (NTRS)

Andrews, J.

1976-01-01

ECON's distribution benefits model has been applied to worldwide distribution of corn, rye, oats, barley, soybeans, and sugar, and to domestic distribution of potatoes. The results indicate that a LANDSAT system with thematic mapper might produce benefits to the United States of about $119 million per year, due to more efficient distribution of these commodities. The benefits to the rest of the world have also been calculated, with a breakdown between trade benefits and those associated with internal use patterns. By far the greatest part of the estimated benefits are assigned to corn, with smaller benefits assigned to soybeans and the small grains (rye, oats, and barley).

The problem of `chronic mastitis' with epitheliosis

PubMed Central

Macgillivray, J. B.

1969-01-01

The incidence of breast cancer complicating chronic mastitis with epitheliosis has been reported to be as high as 45% and as low as 6%. At least part of this discrepancy appears to be due to difficulty in distinguishing between benign and malignant intraduct epithelial proliferation. A small series is presented here in which the incidence of invasive cancer after local excision of breast tissue showing chronic mastitis with epitheliosis was nil. It is concluded that it is necessary to follow up larger series of cases longer before it can be said that severe epitheliosis and borderline lesions should in all cases be treated by anything more radical than local excision. Images PMID:5814739

Interplay of DNA repair with transcription: from structures to mechanisms.

PubMed

Deaconescu, Alexandra M; Artsimovitch, Irina; Grigorieff, Nikolaus

2012-12-01

Many DNA transactions are crucial for maintaining genomic integrity and faithful transfer of genetic information but remain poorly understood. An example is the interplay between nucleotide excision repair (NER) and transcription, also known as transcription-coupled DNA repair (TCR). Discovered decades ago, the mechanisms for TCR have remained elusive, not in small part due to the scarcity of structural studies of key players. Here we summarize recent structural information on NER/TCR factors, focusing on bacterial systems, and integrate it with existing genetic, biochemical, and biophysical data to delineate the mechanisms at play. We also review emerging, alternative modalities for recruitment of NER proteins to DNA lesions. Copyright © 2012 Elsevier Ltd. All rights reserved.

GAS-007: First step in a series of Explorer payloads

NASA Technical Reports Server (NTRS)

Kitchens, Philip H.

1987-01-01

As part of the NASA Get Away Special program for flying small, self-contained payloads onboard the Space Shuttle, the Alabama Space and Rocket Center (ASRC) in Huntsville has sponsored three such payloads for its Project Explorer. One of these is GAS-007, which was carried originally on STS mission 41-G in early October 1984. Due to an operational error it was not turned on and was, therefore, subsequently rescheduled and flown on mission 61-C. This paper will review Explorer's history, outline its experiments, present some preliminary experimental results, and describe future ASRC plans for Get Away Special activities, including follow-on Explorers GAS-105 and GAS-608.

Structure and magnetic properties of Co-Ni-Mn alloy coatings (part 2)

NASA Astrophysics Data System (ADS)

Schmidt, V. V.; Zhikhareva, I. G.; Smirnova, N. V.; Shchipanov, V. P.

2018-03-01

Using the method of high-frequency alternating current (HFAC), based on the preliminary model forecasting of the ratio of metal ions in the electrolyte and the phase composition of the coating, Co-Ni-Mn alloy precipitates with the specified magnetic properties are obtained. It is shown that precipitation with a hexagonal close-packed α-Co phase has the highest coercive force. The presence of a free phase in a small amount (2.1 - 2.6% of weight) of Mn increases the ferromagnetic properties of films due to the domain structures with a poorly defecting α-Mn crystal lattice. The adjustable amount of the amorphous Co(OH)2 phase provides the nanostructure dimensions of the crystals.

Optical properties of C28 fullerene cage: A DFT study

NASA Astrophysics Data System (ADS)

Paul, Debolina; Bhattacharya, Barnali; Deb, Jyotirmoy; Sarkar, Utpal

2018-05-01

Density functional theory methodology have been used to study the optical properties of fullerene C28 with the application of average electric field. The static dielectric constant of C28 is recorded a low value of 1.4. It is observed that the fullerene shows a wide range of absorption in the UV region of the electromagnetic spectrum. The presence of the optical gap in the system as can be observed from the imaginary part of the dielectric function. The observation of small reflectivity suggests its possible uses in hybrid solar cell applications. In addition, due to strong absorption taking place in the UV region, the system could be used in the UV light protection devices.

78 FR 37404 - Small Business Size Standards: Support Activities for Mining

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-20

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG44 Small Business Size Standards: Support Activities for Mining AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The United States Small Business Administration (SBA) is increasing the small business size standards for three of...

76 FR 69154 - Small Business Size and Status Integrity

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

... SMALL BUSINESS ADMINISTRATION 13 CFR Parts 121, 124, 125, 126, and 127 RIN 3245-AG23 Small Business Size and Status Integrity AGENCY: U.S. Small Business Administration (SBA). ACTION: Proposed rule... implement provisions of the Small Business Jobs Act of 2010 (Jobs Act) pertaining to small business size and...

76 FR 5680 - Small Business, Small Disadvantaged Business, HUBZone, and Service-Disabled Veteran-Owned...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-02

... SMALL BUSINESS ADMINISTRATION 13 CFR Parts 121, 124, 125, 126, and 134 RIN 3245-AF65 Small Business, Small Disadvantaged Business, HUBZone, and Service-Disabled Veteran-Owned Business Status Protest and Appeal Regulations. AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: The U...

Technique for ultrasonic cleaning with volatile solvents eliminates need for hoods or condensers

NASA Technical Reports Server (NTRS)

Pipersky, E.

1969-01-01

Technique ultrasonically cleans small quantities of small mechanical parts in organic solvents without the need for vapor removal equipment. Parts are placed in a thin plastic bag with the solvent and then suspended in a cleaning tank containing the water-detergent solution.

BUYING AND SELLING A SMALL BUSINESS.

DTIC Science & Technology

Part One takes the form of a manual of the processes and techniques of buying and selling a small business . This material is presented in a...finalizing the transaction and planning for operation under new ownership and management . Part Two reports the nature of the research conducted during the

Survival Times of Meter-Sized Rock Boulders on the Surface of Airless Bodies

NASA Technical Reports Server (NTRS)

Basilevsky, A. T.; Head, J. W.; Horz, F.; Ramsley, K.

2015-01-01

This study considers the survival times of meter-sized rock boulders on the surfaces of several airless bodies. As the starting point, we employ estimates of the survival times of such boulders on the surface of the Moon by[1], then discuss the role of destruction due to day-night temperature cycling, consider the meteorite bombardment environment on the considered bodies in terms of projectile flux and velocities and finally estimate the survival times. Survival times of meter-sized rocks on lunar surface: The survival times of hand specimen-sized rocks exposed to the lunar surface environment were estimated based on experiments modeling the destruction of rocks by meteorite impacts, combined with measurements of the lunar surface meteorite flux, (e.g.,[2]). For estimations of the survival times of meter-sized lunar boulders, [1] suggested a different approach based on analysis of the spatial density of boulders on the rims of small lunar craters of known absolute age. It was found that for a few million years, only a small fraction of the boulders ejected by cratering process are destroyed, for several tens of million years approx.50% are destroyed, and for 200-300 Ma, 90 to 99% are destroyed. Following [2] and other works, [1] considered that the rocks are mostly destroyed by meteorite impacts. Destruction of rocks by thermal-stress. However, high diurnal temperature variations on the surface of the Moon and other airless bodies imply that thermal stresses may also be a cause of surface rock destruction. Delbo et al. [3] interpreted the observed presence of fine debris on the surface of small asteroids as due to thermal surface cycling. They stated that because of the very low gravity on the surface of these bodies, ejecta from meteorite impacts should leave the body, so formation there of fine debris has to be due to thermal cycling. Based on experiments on heating-cooling of cm-scale pieces of ordinary and carbonaceous chondrites and theoretical modeling of expansion of the cracks formed they concluded that thermal fragmentation breaks up rocks larger than a few centimeters more quickly than do micrometeoroid impacts. According to them at 1 AU distance from the Sun the lifetime of 10 cm rock fragments on asteroids with a period of rotation from 2.2 to 6 hours should be only 103 to 104 years and the larger the rock the faster it gets destroyed. But although [3] are obviously correct stating that impact ejecta should leave small asteroids, the low-velocity part of escaping ejecta will mostly stay in orbits close this given asteroid and part of them will eventually return to it. Moreover, directly beneath the impact point the target rock should be fractured and crushed but may not leave the body (Figure 1). These two points question the conclusions of [3].

The impact of competition on elephant musth strategies: A game-theoretic model.

PubMed

Wyse, J Max; Hardy, Ian C W; Yon, Lisa; Mesterton-Gibbons, Mike

2017-03-21

Mature male African Savannah elephants are known to periodically enter a temporary state of heightened aggression called "musth", often linked with increased androgens, particularly testosterone. Sexually mature males are capable of entering musth at any time of year, and will often travel long distances to find estrous females. When two musth bulls or two non-musth bulls encounter one another, the agonistic interaction is usually won by the larger male. However, when a smaller musth bull encounters a larger non-musth bull, the smaller musth male can win. The relative mating success of musth males is due partly to this fighting advantage, and partly to estrous females' general preference for musth males. Though musth behavior has long been observed and documented, the evolutionary advantages of musth remain poorly understood. Here we develop a game-theoretic model of male musth behavior which assumes musth duration as a parameter, and distributions of small, medium and large musth males are predicted in both time and space. The predicted results are similar to the musth timing behavior observed in the Amboseli National Park elephant population, and further results are generated with relevance to Samburu National Park. We discuss small male musth behavior, the effects of estrous female spatial heterogeneity on musth timing, conservation applications, and the assumptions underpinning the model. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of Eddy Current Capabilities for the Detection of Outer Diameter Stress Corrosion Cracking in Small Bore Metallic Structures

NASA Technical Reports Server (NTRS)

Wincheski, Buzz; Williams, Phillip; Simpson, John

2007-01-01

The use of eddy current techniques for the detection of outer diameter damage in tubing and many complex aerospace structures often requires the use of an inner diameter probe due to a lack of access to the outside of the part. In small bore structures the probe size and orientation are constrained by the inner diameter of the part, complicating the optimization of the inspection technique. Detection of flaws through a significant remaining wall thickness becomes limited not only by the standard depth of penetration, but also geometrical aspects of the probe. Recently, an orthogonal eddy current probe was developed for detection of such flaws in Space Shuttle Primary Reaction Control System (PRCS) Thrusters. In this case, the detection of deeply buried stress corrosion cracking by an inner diameter eddy current probe was sought. Probe optimization was performed based upon the limiting spatial dimensions, flaw orientation, and required detection sensitivity. Analysis of the probe/flaw interaction was performed through the use of finite and boundary element modeling techniques. Experimental data for the flaw detection capabilities, including a probability of detection study, will be presented along with the simulation data. The results of this work have led to the successful deployment of an inspection system for the detection of stress corrosion cracking in Space Shuttle Primary Reaction Control System (PRCS) Thrusters.

SEMICIRCULAR-LIKE SECONDARY FLARE RIBBONS ASSOCIATED WITH A FAILED ERUPTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, R.; Korsós, M. B.; Erdélyi, R., E-mail: r.zheng@sheffield.ac.uk, E-mail: robertus@sheffield.ac.uk

Flare ribbons (FRs) are one of the most apparent signatures of solar flares and have been treated as an indicator of magnetic reconnection. Drawing upon the observations from the Solar Dynamics Observatory, we present semicircular-like secondary FRs (SFRs) of a C2.3 flare on 2013 June 19. Before the flare eruption, two bipoles in this core region subsequently emerged. Due to the interaction between the two bipoles, a tether-cutting eruption took place in the core region. The SFRs, surrounding the core region nearly simultaneously with the flare onset, were much weaker than the two normal FRs. Two ends of the SFRsmore » experienced a separation and extension movement, but the middle part of the SFRs hardly expanded outward. We find SFRs are closely associated with the footpoint brightenings of some small loops around the core region. The eruption was confined by transequatorial loops (TLs), which resulted in the plasma material falling in the north end of the TLs and remote brightenings showing up in the south end of the TLs. The disappearance of the faint (filament) material during the emergence of the SFRs could indicate another eruption. We conclude that two or more magnetic reconnections are involved in this event and propose that SFRs consisting of a small part of true FRs resulted from the second magnetic reconnection and bright footpoints of loop clusters likely heated by the main flare.« less

Child maltreatment and neglect, or poverty and ignorance: An old case from the museum.

PubMed

Nikolić, Slobodan; Živković, Vladimir

2016-04-01

We present an old case, from the year 1928, of a girl who, as an 18-month-old, had ingested a small amount of lye, and over time oesophageal stenosis had developed. However, her parents had not taken her to hospital until 4 months after the event, after an episode of bloody vomiting. She spent the remaining time of her life in the hospital, where she died as a 3-year-old. Her parents did not visit once during that time. After the autopsy, the opinion about the cause and mechanism of death had five steps: the immediate cause of death was purulent pneumonia, which was a complication of small pox and severe undernourishment; the severe undernourishment was the consequence of a narrowed part of the oesophagus; this developed due to the ingestion of the corrosive agent; and it remained uncertain whether the ingestion of the corrosive agent was accidental or homicidal in manner. The presented case could be an example of possible child maltreatment and neglect in rural parts of society, from almost 90 year ago; at the time these cases were not recognized and treated as they would be today. This is also an example of how the forensic pathologist, via the conclusion about the cause of death, highlighted the parents' carelessness and neglect of the child. © The Author(s) 2015.

LINEs Contribute to the Origins of Middle Bodies of SINEs besides 3′ Tails

PubMed Central

2018-01-01

Abstract Short interspersed elements (SINEs), which are nonautonomous transposable elements, require the transposition machinery of long interspersed elements (LINEs) to mobilize. SINEs are composed of two or more independently originating parts. The 5′ region is called the “head” and is derived mainly from small RNAs, and the 3′ region (“tail”) originates from the 3′ region of LINEs and is responsible for being recognized by counterpart LINE proteins. The origin of the middle “body” of SINEs is enigmatic, although significant sequence similarities among SINEs from very diverse species have been observed. Here, a systematic analysis of the similarities among SINEs and LINEs deposited on Repbase, a comprehensive database of eukaryotic repeat sequences was performed. Three primary findings are described: 1) The 5′ regions of only two clades of LINEs, RTE and Vingi, were revealed to have contributed to the middle parts of SINEs; 2) The linkage of the 5′ and 3′ parts of LINEs can be lost due to occasional tail exchange of SINEs; and 3) The previously proposed Ceph-domain was revealed to be a fusion of a CORE-domain and a 5′ part of RTE clade of LINE. Based on these findings, a hypothesis that the 5′ parts of bipartite nonautonomous LINEs, which possess only the 5′ and 3′ regions of the original LINEs, can contribute to the undefined middle part of SINEs is proposed. PMID:29325122

A stable partitioned FSI algorithm for rigid bodies and incompressible flow. Part I: Model problem analysis

NASA Astrophysics Data System (ADS)

Banks, J. W.; Henshaw, W. D.; Schwendeman, D. W.; Tang, Qi

2017-08-01

A stable partitioned algorithm is developed for fluid-structure interaction (FSI) problems involving viscous incompressible flow and rigid bodies. This added-mass partitioned (AMP) algorithm remains stable, without sub-iterations, for light and even zero mass rigid bodies when added-mass and viscous added-damping effects are large. The scheme is based on a generalized Robin interface condition for the fluid pressure that includes terms involving the linear acceleration and angular acceleration of the rigid body. Added-mass effects are handled in the Robin condition by inclusion of a boundary integral term that depends on the pressure. Added-damping effects due to the viscous shear forces on the body are treated by inclusion of added-damping tensors that are derived through a linearization of the integrals defining the force and torque. Added-damping effects may be important at low Reynolds number, or, for example, in the case of a rotating cylinder or rotating sphere when the rotational moments of inertia are small. In this first part of a two-part series, the properties of the AMP scheme are motivated and evaluated through the development and analysis of some model problems. The analysis shows when and why the traditional partitioned scheme becomes unstable due to either added-mass or added-damping effects. The analysis also identifies the proper form of the added-damping which depends on the discrete time-step and the grid-spacing normal to the rigid body. The results of the analysis are confirmed with numerical simulations that also demonstrate a second-order accurate implementation of the AMP scheme.

76 FR 62313 - Small Business Size and Status Integrity

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-07

... cooperative research and development agreement, as a small business concern. (f) Signature Requirement. Each..., cooperative agreement, or cooperative research and development agreement, as a small disadvantaged business... SMALL BUSINESS ADMINISTRATION 13 CFR Parts 121, 124, 125, 126, 127 RIN 3245-AG23 Small Business...

Identifying Preserved Storm Events on Beaches from Trenches and Cores

NASA Astrophysics Data System (ADS)

Wadman, H. M.; Gallagher, E. L.; McNinch, J.; Reniers, A.; Koktas, M.

2014-12-01

Recent research suggests that even small scale variations in grain size in the shallow stratigraphy of sandy beaches can significantly influence large-scale morphology change. However, few quantitative studies of variations in shallow stratigraphic layers, as differentiated by variations in mean grain size, have been conducted, in no small part due to the difficulty of collecting undisturbed sediment cores in the energetic lower beach and swash zone. Due to this lack of quantitative stratigraphic grain size data, most coastal morphology models assume that uniform grain sizes dominate sandy beaches, allowing for little to no temporal or spatial variations in grain size heterogeneity. In a first-order attempt to quantify small-scale, temporal and spatial variations in beach stratigraphy, thirty-five vibracores were collected at the USACE Field Research Facility (FRF), Duck, NC, in March-April of 2014 using the FRF's Coastal Research and Amphibious Buggy (CRAB). Vibracores were collected at set locations along a cross-shore profile from the toe of the dune to a water depth of ~1m in the surf zone. Vibracores were repeatedly collected from the same locations throughout a tidal cycle, as well as pre- and post a nor'easter event. In addition, two ~1.5m deep trenches were dug in the cross-shore and along-shore directions (each ~14m in length) after coring was completed to allow better interpretation of the stratigraphic sequences observed in the vibracores. The elevations of coherent stratigraphic layers, as revealed in vibracore-based fence diagrams and trench data, are used to relate specific observed stratigraphic sequences to individual storm events observed at the FRF. These data provide a first-order, quantitative examination of the small-scale temporal and spatial variability of shallow grain size along an open, sandy coastline. The data will be used to refine morphological model predictions to include variations in grain size and associated shallow stratigraphy.

Measuring genetic distances between breeds: use of some distances in various short term evolution models

PubMed Central

Laval, Guillaume; SanCristobal, Magali; Chevalet, Claude

2002-01-01

Many works demonstrate the benefits of using highly polymorphic markers such as microsatellites in order to measure the genetic diversity between closely related breeds. But it is sometimes difficult to decide which genetic distance should be used. In this paper we review the behaviour of the main distances encountered in the literature in various divergence models. In the first part, we consider that breeds are populations in which the assumption of equilibrium between drift and mutation is verified. In this case some interesting distances can be expressed as a function of divergence time, t, and therefore can be used to construct phylogenies. Distances based on allele size distribution (such as (δμ)2 and derived distances), taking a mutation model of microsatellites, the Stepwise Mutation Model, specifically into account, exhibit large variance and therefore should not be used to accurately infer phylogeny of closely related breeds. In the last section, we will consider that breeds are small populations and that the divergence times between them are too small to consider that the observed diversity is due to mutations: divergence is mainly due to genetic drift. Expectation and variance of distances were calculated as a function of the Wright-Malécot inbreeding coefficient, F. Computer simulations performed under this divergence model show that the Reynolds distance [57]is the best method for very closely related breeds. PMID:12270106

Alien reef-building polychaete drives long-term changes in invertebrate biomass and diversity in a small, urban estuary

NASA Astrophysics Data System (ADS)

McQuaid, K. A.; Griffiths, C. L.

2014-02-01

Two of the greatest threats to native biodiversity are the construction of artificial structures in natural environments and the introduction of invasive species. As the development and urbanisation of estuaries continues at an increasing rate worldwide, these environments are being simultaneously affected by these threats. This study quantifies the spread of an invasive reef-building polychaete, Ficopomatus enigmaticus, in a small, highly manipulated urban estuary in South Africa and investigates its role as an ecosystem engineer. Anthropogenic changes to the Zandvlei Estuary, including construction of a rubble weir and canalisation near the estuary mouth, construction of an extensive marina development and hardening of the banks with concrete, have facilitated the expansion of F. enigmaticus. The standing stock of F. enigmaticus increased from 13.69 t, as measured in 1986, to 50.03 t in 2012, due both to increase in the total area colonised and standing stock per m2. Since F. enigmaticus reefs support a greater biomass of infauna than adjacent sandy areas, total invertebrate biomass in the estuary is estimated to have increased from less than 0.30 t in 1942, to over 56.80 t in 2012, due mainly to hardening of banks in parts of the main estuary with concrete and construction of a marina system. A positive correlation between reef mass and infaunal biomass, density and diversity was also found.

Pneumothorax effects on pulmonary acoustic transmission.

PubMed

Mansy, Hansen A; Balk, Robert A; Warren, William H; Royston, Thomas J; Dai, Zoujun; Peng, Ying; Sandler, Richard H

2015-08-01

Pneumothorax (PTX) is an abnormal accumulation of air between the lung and the chest wall. It is a relatively common and potentially life-threatening condition encountered in patients who are critically ill or have experienced trauma. Auscultatory signs of PTX include decreased breath sounds during the physical examination. The objective of this exploratory study was to investigate the changes in sound transmission in the thorax due to PTX in humans. Nineteen human subjects who underwent video-assisted thoracic surgery, during which lung collapse is a normal part of the surgery, participated in the study. After subjects were intubated and mechanically ventilated, sounds were introduced into their airways via an endotracheal tube. Sounds were then measured over the chest surface before and after lung collapse. PTX caused small changes in acoustic transmission for frequencies below 400 Hz. A larger decrease in sound transmission was observed from 400 to 600 Hz, possibly due to the stronger acoustic transmission blocking of the pleural air. At frequencies above 1 kHz, the sound waves became weaker and so did their changes with PTX. The study elucidated some of the possible mechanisms of sound propagation changes with PTX. Sound transmission measurement was able to distinguish between baseline and PTX states in this small patient group. Future studies are needed to evaluate this technique in a wider population. Copyright © 2015 the American Physiological Society.

Soluble arabinoxylan alters digesta flow and protein digestion of red meat-containing diets in pigs.

PubMed

Zhang, Dagong; Williams, Barbara A; Mikkelsen, Deirdre; Li, Xiuhua; Keates, Helen L; Lisle, Allan T; Collins, Helen M; Fincher, Geoffrey B; Bird, Anthony R; Topping, David L; Gidley, Michael J; Bryden, Wayne L

2015-09-01

The aim of this study was to investigate how a moderate increase in dietary meat content combined (or not) with soluble fibre would influence protein digestion as well as digesta characteristics and flow. Four groups of pigs were fed Western-style diets (high-protein/high-fat) containing two types of barbecued red meat, one with and one without a wheat arabinoxylan-rich fraction. After 4 wk, digesta samples were collected from small and large intestinal sites and analyzed for protein, amino acids, dry matter, and acid-insoluble ash. Tissue samples were also collected from each site. Arabinoxylan consumption led to somewhat lower apparent protein digestibility within the small and large intestines as well as shorter mean retention times. This suggests that the lowered protein digestibility is due, at least partly, to shorter access time to digestive proteases and absorptive surfaces. Additionally, digesta mass was higher in pigs fed arabinoxylan while dry matter (%) was lower, indicating an increased digesta water-holding capacity due to the presence of a soluble dietary fiber. Data showed that solubilized wheat arabinoxylan provides potential health benefits through decreased protein digestibility, increased digesta mass, and reduced mean retention time, even for diets with a moderately higher protein content. These factors are associated with efficiency of digestion and satiety, both of which have implications for prevention of obesity and other health disorders. Copyright © 2015 Elsevier Inc. All rights reserved.

Intestinal perforation that developed after chemotherapy in a patient diagnosed with non-Hodgkin lymphoma: A case report and review of literature.

PubMed

Tatar, Cihad; Yavas, Mazlum; Akkus, Onder; Tapkan, Bahaeddin; Batikan, Oguz Kagan; Bayrak, Savas; Arikan, Soykan

2017-01-01

Non-Hodgkin Lymphomas (NHL) appear with the malign transformation of mature lymphocytes. Intestinal perforations are one of the most well-known complications of NHLs. In this review, a 29-year-old male patient who was diagnosed with NHL with gastrointestinal involvement that developed intestinal perforation after chemotherapy is presented. A 29-year-old male patient who received systemic chemotherapy in another healthcare center due to Major B-Cell Lymphoma was examined because he had stomachache after the treatment. The patient was urgently taken to operation. In the exploration, there were partly mass lesions in all small intestine segments. It was determined that one of the lesion was perforated. Small intestine resection was applied. The pathology report on resection material was reported as High Grade Major B-Cell Lymphoma. In the treatment of Lymphoma with intestinal B-Cells, there is no consensus because this disease is rarely observed. Perforation may appear as a complication of the chemotherapy. Depending on the steroids given to the patient, perforation may develop, and the clinical symptoms may be masked. It must be born in mind that there may be intestinal involvement in patients diagnosed with NHL, and intestinal perforation may develop due to chemotherapy. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Small Gas Engine Repair.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational-Technical Schools.

Instructional materials are provided for a small gas engine course. A list of objectives appears first, followed by a list of internal parts and skills/competencies related to those parts for engine work, ignition and electrical systems, fuel system, crankcase lubrication system, arc welding skills, and gas welding skills. Outlines are provided…

Turbulence Spectra in the Surface Layer with a Steady Surface Thermal Inversion

NASA Astrophysics Data System (ADS)

Peng, Z.; Hu, F.; Ma, X.; Liu, S.

2007-12-01

the EBEX-2000 (International Energy Balance Experiment, 2000, EBEX-2000) was carried out over a flood- irrigated cotton field with very strong evaporation and transpiration. And thus the latent heat flux took most part of the solar radiation and the sensible heat flux, which would directly heat the atmosphere, was very small and even became negative in mid-afternoon. Therefore, the thermal turbulence was suppressed and there always existed a surface thermal inversion during the observation. The temperatures measured at 8.7 m were always higher than that at 2.7 m, which further restrained the development of the turbulence in the lower part of the surface layer, and the turbulence exchanges for the momentum, energy and other were restrained too. Owing to strong action of the underlying surface, there is distinct wind shear, and the nearer the distance to the ground, the stronger the wind shear. Moreover, the surface thermal inversion makes the wind shear sustainable and stable. On the other hand, due to the strong blocking and friction action of the underlying surface, eddies would be strongly impacted when they came close to the ground, in particular for small eddies. That is to say, the nearer the distance to the ground, the stronger the influence of the ground on small eddies and the larger the range of eddy-size that can be directly influenced by the ground. Both the above factors contribute to the differences between the spectra at intermediate frequencies at the two heights: the horizontal power spectrum at 8.7 m does not obey -1 power law at intermediate frequencies, but it does at 2.7 m. The vertical power spectra at 8.7 m are somewhat flatter and broader at the spectral peak, while they are sharper and narrower at 2.7 m.

Variolites - results of liquid immiscibility or mingling?: Evidence from variolitic lava, axial part of the Mid-Atlantic Ridge, 6oN

NASA Astrophysics Data System (ADS)

Sharkov, E. V.

2010-12-01

Fragment of variolitic lavas was dredged in axial part of the MAR at 6oN during 10th cruise of R/V “Akademik Ioffe” (2001-2002). It is rock where rounded globules of andesite (icelandite) with light trachyandesite rims are enclosed in Fe-Ti picrobasalt matrix. The sample can be subdivided in two different structural parts or “layers”. One of them densely saturated by globules, which closely adjoin to each other, merge in clumpy congregations; in another part matrix predominates. Boundary between both parts, even if irregular due to rounded shape of closed globules, nevertheless is well-defined and has small bays of the matrix material. So, globules were moved in picrobasaltic melt and floated up to the surface of the lava flow. It is shown that formation of the leucocratic rims was evidently linked with thermal diffusion phenomenon (Soret principle) in cooling heterogeneous melt. According to this principle, components in solutions and melts, placed in thermal gradient, are redistributed for leveling of internal energy in that way, when light elements migrate to hot parts and heavy ones to cold. Experimental studies of thermal diffusion in samples of MORB showed enlarge of Si, Al, Na and K concentration to side of hot area of melt and Fe, Mg, Ca, etc. to cold one; resulting melts were andesites and Ne-normative picrite (Walker, DeLong, 1982). The same picture we saw in our sample: enrichment of external zone of globules by Si, Al, and, especially, by high-mobile Na, which diffusion rate in silicate melts in some order higher than speed of remaining elements (Watson, 1982; Borisov, 2008). Simultaneously, this zone impoverished by Fe, Ca and Mg, which were concentrated in rear of rims, forming internal zoning of globules with careless boundaries. Effect of thermal diffusion in more important for Fe; as a result #mg in trachyandesite rims higher than in andesite cores of globules. It suggests that origin of variolites was linked with intersection by ascended column of picrobasaltic magma of existed at that time in crust above small shallow magmatic chamber with residual melt of andesite (icelandite) in composition, which was involved in general upwards current. Because ascending of magmas in axial part of the MAR was whirl (Sharkov et al., 2008), alien melt was dispersed on small drops, but, however, had not time to dissolved in host picrite melt. Formation of proper variolites was occurred in process of moving and cooling of such heterogeneous lava on oceanic floor. From this follows that axial parts of low-spreading ridges have very complicate structure, where different melts can coexist. There are no any evidence of liquid immiscibility the variolite origin. The same petrological features are typical for classic Paleoproterozoic variolites of the Yal-Guba, Onega Lake, Karelia. They were firstly described by F.Yu. Levinson-Lessing in 1920th. We conclude that variolite formation are linked with complex magmatic systems where small shallow magma chambers with evolved melt were intersected by streams of new magma portions from deep-seated source. Indispensable condition for variolites is contrasting composition of the magmas which allow to clearly see this phenomenon.

Differences in the occurrence and characteristics of injuries between full-time and part-time dancers

PubMed Central

Pappas, Evangelos; Stamatakis, Emmanuel; Hiller, Claire E

2018-01-01

Background Professional dancers are at significant risk of injury due to the physical demands of their career. Despite their high numbers, the experience of injury in freelance or part-time dancers is not well understood. Therefore, the aim of this study was to examine the occurrence and characteristics of injury in part-time compared with full-time Australian professional dancers. Methods Data were collected using a cross-sectional survey distributed to employees of small and large dance companies and freelance dancers in Australia. Statistical comparisons between full-time and part-time dancer demographics, dance training, injury prevalence and characteristics were made using χ2, two-tailed Fisher’s exact tests, independent t-tests and Mann-Whitney U tests. Results A total of 89 full-time and 57 part-time dancers were included for analysis. A higher proportion of full-time dancers (79.8%) than part-time dancers (63.2%) experienced an injury that impacted on their ability to dance in the past 12 months (p=0.035). Injuries characteristics were similar between groups with fatigue being the most cited contributing factor. Part-time dancers took longer to seek treatment while a higher proportion of full-time dancers were unable to dance in any capacity following their injury. Conclusion More full-time dancers sustained an injury in the past 12 months, and were unable to dance in any capacity following their injury. However injuries still commonly occurred in part-time dancers without necessarily a large volume of dance activity. Part-time dancers often access general community clinicians for treatment, who may need additional education to practically advise on appropriate return to dance. PMID:29629183

Differences in the occurrence and characteristics of injuries between full-time and part-time dancers.

PubMed

Vassallo, Amy Jo; Pappas, Evangelos; Stamatakis, Emmanuel; Hiller, Claire E

2018-01-01

Professional dancers are at significant risk of injury due to the physical demands of their career. Despite their high numbers, the experience of injury in freelance or part-time dancers is not well understood. Therefore, the aim of this study was to examine the occurrence and characteristics of injury in part-time compared with full-time Australian professional dancers. Data were collected using a cross-sectional survey distributed to employees of small and large dance companies and freelance dancers in Australia. Statistical comparisons between full-time and part-time dancer demographics, dance training, injury prevalence and characteristics were made using χ 2 , two-tailed Fisher's exact tests, independent t-tests and Mann-Whitney U tests. A total of 89 full-time and 57 part-time dancers were included for analysis. A higher proportion of full-time dancers (79.8%) than part-time dancers (63.2%) experienced an injury that impacted on their ability to dance in the past 12 months (p=0.035). Injuries characteristics were similar between groups with fatigue being the most cited contributing factor. Part-time dancers took longer to seek treatment while a higher proportion of full-time dancers were unable to dance in any capacity following their injury. More full-time dancers sustained an injury in the past 12 months, and were unable to dance in any capacity following their injury. However injuries still commonly occurred in part-time dancers without necessarily a large volume of dance activity. Part-time dancers often access general community clinicians for treatment, who may need additional education to practically advise on appropriate return to dance.

PACE. A Program for Acquiring Competence in Entrepreneurship. Part I: Getting Ready to Become an Entrepreneur. Unit A: Nature of Small Business. Research and Development Series No. 194 A-1.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the three instructional units in Part I is understanding businesses. Unit A focuses on defining small business.…

16 CFR § 1020.2 - What is the definition of “small business”?

Code of Federal Regulations, 2013 CFR

2013-01-01

...? § 1020.2 Section § 1020.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL SMALL BUSINESS § 1020.2 What is the definition of “small business”? As used in this part, the term small business means any entity that is either a small business, small organization, or small governmental jurisdiction...

Anthrax. William Smith Greenfield, M.D., F.R.C.P., Professor Superintendent, the Brown Animal Sanatory Institution (1878-81). Concerning the priority due to him for the production of the first vaccine against anthrax.

PubMed Central

Tigertt, W. D.

1980-01-01

The purpose of this paper is to draw attention to the fact that W. S. Greenfield, working at the Brown Animal Sanatory Institution in London, prepared an effective vaccine against anthrax and described his results some months before the experiment of Pasteur at Pouilly-le-fort. Partly through lack of financial support and partly due to opposition by the antivivisectionists, Greenfield was forced to confine his experiments to a small number of animals, but his results were nevertheless conclusive. He showed that by continuous subculture in a fluid medium that the anthrax bacillus progressively lost its virulence, until it was harmless even to the most susceptible animal, the mouse. The injection of suitably attenuated organisms into cattle rendered them immune to the subsequent injection of virulent anthrax bacilli. Greenfield's work has been overlooked or neglected, and he has never received the credit due him. It is only fitting that his work should be acknowledged in the centenary of the year in which it was described. The following account is composed primarily of quotations from his published papers. For additional information on Greenfield, reference may be made to the series of papers by Wilson (1979 a, b). It may be pointed out that the method of attenuating the virulence of bacilli recorded by Pasteur in relation to the bacillus of fowl cholera was, like that of anthrax vaccine, anticipated by Greenfield. PMID:7007487

Analytical and numerical analysis of imaging mechanism of dynamic scanning electron microscopy.

PubMed

Schröter, M-A; Holschneider, M; Sturm, H

2012-11-02

The direct observation of small oscillating structures with the help of a scanning electron beam is a new approach to study the vibrational dynamics of cantilevers and microelectromechanical systems. In the scanning electron microscope, the conventional signal of secondary electrons (SE, dc part) is separated from the signal response of the SE detector, which is correlated to the respective excitation frequency for vibration by means of a lock-in amplifier. The dynamic response is separated either into images of amplitude and phase shift or into real and imaginary parts. Spatial resolution is limited to the diameter of the electron beam. The sensitivity limit to vibrational motion is estimated to be sub-nanometer for high integration times. Due to complex imaging mechanisms, a theoretical model was developed for the interpretation of the obtained measurements, relating cantilever shapes to interaction processes consisting of incident electron beam, electron-lever interaction, emitted electrons and detector response. Conclusions drawn from this new model are compared with numerical results based on the Euler-Bernoulli equation.

Leptin Action on GABAergic Neurons Prevents Obesity and Reduces Inhibitory Tone to POMC Neurons

PubMed Central

Vong, Linh; Ye, Chianping; Yang, Zongfang; Choi, Brian; Chua, Streamson; Lowell, Bradford B.

2011-01-01

SUMMARY Leptin acts in the brain to prevent obesity. The underlying neurocircuitry responsible for this is poorly understood, in part due to incomplete knowledge regarding first order, leptin-responsive neurons. To address this, we and others have been removing leptin receptors from candidate first order neurons. While functionally relevant neurons have been identified, the observed effects have been small suggesting that most first order neurons remain unidentified. Here we take an alternative approach and test whether first order neurons are inhibitory (GABAergic, VGAT+) or excitatory (glutamatergic, VGLUT2+). Remarkably, the vast majority of leptin’s anti-obesity effects are mediated by GABAergic neurons; glutamatergic neurons play only a minor role. Leptin, working directly on presynaptic GABAergic neurons, many of which appear not to express AgRP, reduces inhibitory tone to postsynaptic POMC neurons. As POMC neurons prevent obesity, their disinhibition by leptin action on presynaptic GABAergic neurons likely mediates, at least in part, leptin’s anti-obesity effects. PMID:21745644

Age, growth rates, and paleoclimate studies of deep sea corals

USGS Publications Warehouse

Prouty, Nancy G; Roark, E. Brendan; Andrews, Allen; Robinson, Laura; Hill, Tessa; Sherwood, Owen; Williams, Branwen; Guilderson, Thomas P.; Fallon, Stewart

2015-01-01

Deep-water corals are some of the slowest growing, longest-lived skeletal accreting marine organisms. These habitat-forming species support diverse faunal assemblages that include commercially and ecologically important organisms. Therefore, effective management and conservation strategies for deep-sea corals can be informed by precise and accurate age, growth rate, and lifespan characteristics for proper assessment of vulnerability and recovery from perturbations. This is especially true for the small number of commercially valuable, and potentially endangered, species that are part of the black and precious coral fisheries (Tsounis et al. 2010). In addition to evaluating time scales of recovery from disturbance or exploitation, accurate age and growth estimates are essential for understanding the life history and ecology of these habitat-forming corals. Given that longevity is a key factor for population maintenance and fishery sustainability, partly due to limited and complex genetic flow among coral populations separated by great distances, accurate age structure for these deep-sea coral communities is essential for proper, long-term resource management.

SiC Recession Due to SiO2 Scale Volatility Under Combustion Conditions. Part 2; Thermodynamics and Gaseous Diffusion Model

NASA Technical Reports Server (NTRS)

Opila, Elizabeth J.; Smialek, James L.; Robinson, Raymond C.; Fox, Dennis S.; Jacobson, Nathan S.

1998-01-01

In combustion environments, volatilization of SiO2 to Si-O-H(g) species is a critical issue. Available thermochemical data for Si-O-H(g) species were used to calculate boundary layer controlled fluxes from SiO2. Calculated fluxes were compared to volatilization rates Of SiO2 scales grown on SiC which were measured in Part 1 of this paper. Calculated volatilization rates were also compared to those measured in synthetic combustion gas furnace tests. Probable vapor species were identified in both fuel-lean and fuel-rich combustion environments based on the observed pressure, temperature and velocity dependencies as well as the magnitude of the volatility rate. Water vapor is responsible for the degradation of SiO2 in the fuel-lean environment. Silica volatility in fuel-lean combustion environments is attributed primarily to the formation of Si(OH)4(g) with a small contribution of SiO(OH)2(g).

Using a Lego-based communications simulation to introduce medical students to patient-centered interviewing.

PubMed

Harding, S R; D'Eon, M F

2001-01-01

Teaching patient-centered interviewing skills to medical students can be challenging. We have observed that 1st-year medical students, in particular, do not feel free to concentrate on the interviewing skills because they are preoccupied with complicated technical medical knowledge. The Lego simulation we use with our 1st-year students as part of a professional-skills course overcomes that difficulty. The Lego activity is a role play analogous to a doctor-patient interview that uses identical sets of Legos for the "doctor" and for the "patients" and a small construction that represents a patient history. With a simple questionnaire, data were collected from students at different points during instruction. Results indicate that the Lego activity was very effective in helping students learn the importance of open-ended questioning. It also was rated as highly as the very dynamic interactive part of the instructional session. The effectiveness of the Lego activity may be due to the properties of analogies.

Low-friction nanojoint prototype

NASA Astrophysics Data System (ADS)

Vlassov, Sergei; Oras, Sven; Antsov, Mikk; Butikova, Jelena; Lõhmus, Rünno; Polyakov, Boris

2018-05-01

High surface energy of individual nanostructures leads to high adhesion and static friction that can completely hinder the operation of nanoscale systems with movable parts. For instance, silver or gold nanowires cannot be moved on silicon substrate without plastic deformation. In this paper, we experimentally demonstrate an operational prototype of a low-friction nanojoint. The movable part of the prototype is made either from a gold or silver nano-pin produced by laser-induced partial melting of silver and gold nanowires resulting in the formation of rounded bulbs on their ends. The nano-pin is then manipulated into the inverted pyramid (i-pyramids) specially etched in a Si wafer. Due to the small contact area, the nano-pin can be repeatedly tilted inside an i-pyramid as a rigid object without noticeable deformation. At the same time in the absence of external force the nanojoint is stable and preserves its position and tilt angle. Experiments are performed inside a scanning electron microscope and are supported by finite element method simulations.

76 FR 43571 - Small Business HUBZone Program; Government Contracting Programs

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 126 RIN 3245-AG45 Small Business HUBZone Program; Government Contracting Programs AGENCY: U.S. Small Business Administration. ACTION: Interim final rule with request for comments. SUMMARY: This interim final rule amends the U.S. Small Business Administration's...

77 FR 38181 - VA Veteran-Owned Small Business Verification Guidelines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 74 RIN 2900-AO49 VA Veteran-Owned Small Business... small businesses (VOSBs), including service-disabled veteran-owned small businesses (SDVOSBs) in order...- AO49--VA Veteran-Owned Small Business Verification Guidelines.'' All comments received will be...

76 FR 81430 - Small Business Investment Companies-Early Stage SBICs; Public Webinars

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-28

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 107 Small Business Investment Companies--Early Stage... Webinars regarding its proposed Early Stage Small Business Investment Companies (Early Stage SBIC) rule. The proposed Early Stage SBIC rule defines a new sub-category of small business investment companies...

High genetic load in an old isolated butterfly population.

PubMed

Mattila, Anniina L K; Duplouy, Anne; Kirjokangas, Malla; Lehtonen, Rainer; Rastas, Pasi; Hanski, Ilkka

2012-09-11

We investigated inbreeding depression and genetic load in a small (N(e) ∼ 100) population of the Glanville fritillary butterfly (Melitaea cinxia), which has been completely isolated on a small island [Pikku Tytärsaari (PT)] in the Baltic Sea for at least 75 y. As a reference, we studied conspecific populations from the well-studied metapopulation in the Åland Islands (ÅL), 400 km away. A large population in Saaremaa, Estonia, was used as a reference for estimating genetic diversity and N(e). We investigated 58 traits related to behavior, development, morphology, reproductive performance, and metabolism. The PT population exhibited high genetic load (L = 1 - W(PT)/W(ÅL)) in a range of fitness-related traits including adult weight (L = 0.12), flight metabolic rate (L = 0.53), egg viability (L = 0.37), and lifetime production of eggs in an outdoor population cage (L = 0.70). These results imply extensive fixation of deleterious recessive mutations, supported by greatly reduced diversity in microsatellite markers and immediate recovery (heterosis) of egg viability and flight metabolic rate in crosses with other populations. There was no significant inbreeding depression in most traits due to one generation of full-sib mating. Resting metabolic rate was significantly elevated in PT males, which may be related to their short lifespan (L = 0.25). The demographic history and the effective size of the PT population place it in the part of the parameter space in which models predict mutation accumulation. This population exemplifies the increasingly common situation in fragmented landscapes, in which small and completely isolated populations are vulnerable to extinction due to high genetic load.

Simultaneous observations of structure function parameter of refractive index using a high-resolution radar and the DataHawk small airborne measurement system

NASA Astrophysics Data System (ADS)

Scipión, Danny E.; Lawrence, Dale A.; Milla, Marco A.; Woodman, Ronald F.; Lume, Diego A.; Balsley, Ben B.

2016-09-01

The SOUSY (SOUnding SYstem) radar was relocated to the Jicamarca Radio Observatory (JRO) near Lima, Peru, in 2000, where the radar controller and acquisition system were upgraded with state-of-the-art parts to take full advantage of its potential for high-resolution atmospheric sounding. Due to its broad bandwidth (4 MHz), it is able to characterize clear-air backscattering with high range resolution (37.5 m). A campaign conducted at JRO in July 2014 aimed to characterize the lower troposphere with a high temporal resolution (8.1 Hz) using the DataHawk (DH) small unmanned aircraft system, which provides in situ atmospheric measurements at scales as small as 1 m in the lower troposphere and can be GPS-guided to obtain measurements within the beam of the radar. This was a unique opportunity to make coincident observations by both systems and to directly compare their in situ and remotely sensed parameters. Because SOUSY only points vertically, it is only possible to retrieve vertical radar profiles caused by changes in the refractive index within the resolution volume. Turbulent variations due to scattering are described by the structure function parameter of refractive index Cn2. Profiles of Cn2 from the DH are obtained by combining pressure, temperature, and relative humidity measurements along the helical trajectory and integrated at the same scale as the radar range resolution. Excellent agreement is observed between the Cn2 estimates obtained from the DH and SOUSY in the overlapping measurement regime from 1200 m up to 4200 m above sea level, and this correspondence provides the first accurate calibration of the SOUSY radar for measuring Cn2.

Base Station Placement Algorithm for Large-Scale LTE Heterogeneous Networks.

PubMed

Lee, Seungseob; Lee, SuKyoung; Kim, Kyungsoo; Kim, Yoon Hyuk

2015-01-01

Data traffic demands in cellular networks today are increasing at an exponential rate, giving rise to the development of heterogeneous networks (HetNets), in which small cells complement traditional macro cells by extending coverage to indoor areas. However, the deployment of small cells as parts of HetNets creates a key challenge for operators' careful network planning. In particular, massive and unplanned deployment of base stations can cause high interference, resulting in highly degrading network performance. Although different mathematical modeling and optimization methods have been used to approach various problems related to this issue, most traditional network planning models are ill-equipped to deal with HetNet-specific characteristics due to their focus on classical cellular network designs. Furthermore, increased wireless data demands have driven mobile operators to roll out large-scale networks of small long term evolution (LTE) cells. Therefore, in this paper, we aim to derive an optimum network planning algorithm for large-scale LTE HetNets. Recently, attempts have been made to apply evolutionary algorithms (EAs) to the field of radio network planning, since they are characterized as global optimization methods. Yet, EA performance often deteriorates rapidly with the growth of search space dimensionality. To overcome this limitation when designing optimum network deployments for large-scale LTE HetNets, we attempt to decompose the problem and tackle its subcomponents individually. Particularly noting that some HetNet cells have strong correlations due to inter-cell interference, we propose a correlation grouping approach in which cells are grouped together according to their mutual interference. Both the simulation and analytical results indicate that the proposed solution outperforms the random-grouping based EA as well as an EA that detects interacting variables by monitoring the changes in the objective function algorithm in terms of system throughput performance.

Canine blastomycosis in Wisconsin: a survey of small-animal veterinary practices.

PubMed

Anderson, Jennifer L; Dieckman, Jordan L; Reed, Kurt D; Meece, Jennifer K

2014-10-01

The disease burden and impact of canine blastomycosis in Wisconsin is uncertain. We surveyed small-animal veterinary practices to obtain estimates of disease incidence, determine patient outcomes, and investigate variation in diagnostic and treatment strategies used by veterinarians. Veterinarians representing small-animal practices in Wisconsin were contacted by mail with the option to complete a paper or online questionnaire. Questionnaires were returned from 68 of 443 veterinary practices (15%) that estimated diagnosing 239 cases of canine blastomycosis annually, with an overall mortality of 36%. Annual incidence rates of canine blastomycosis were calculated for 43 individual veterinary clinics and differed significantly between clinics in endemic and nonendemic counties (P = 0.01), with the mean in endemic counties being 204/100,000/yr and nonendemic counties being 72/100,000/yr. Veterinarians reported an increase in canine blastomycosis cases from April through August. A wide variety of methods were used for diagnosis, ranging from clinical signs alone to antigen testing and "in-house" cytology. Of note, fungal culture was used rarely for diagnosis. In addition, veterinarians at these 68 clinics estimated diagnosing 36 cases of feline blastomycosis annually. The incidence of canine blastomycosis is high but quite variable among veterinary practices in Wisconsin. Diagnosis is based frequently on clinical signs exclusively due, in part, to the perceived high cost of laboratory tests. Similarly, the mortality associated with blastomycosis is likely negatively impacted because some dog owners defer therapy due to the cost of antifungal drugs. © The Author 2014. Published by Oxford University Press on behalf of The International Society for Human and Animal Mycology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Time-Resolved Records of Magnetic Activity on the Pallasite Parent Body and Psyche

NASA Astrophysics Data System (ADS)

Bryson, J. F. J.; Nichols, C. I. O.; Herrero-Albillos, J.; Kronast, F.; Kasama, T.; Alimadadi, H.; van der Laan, G.; Nimmo, F.; Harrison, R. J.

2014-12-01

Although many small bodies apparently generated dynamo fields in the early solar system, the nature and temporal evolution of these fields has remained enigmatic. Time-resolved records of the Earth's planetary field have been essential in understanding the dynamic history of our planet, and equivalent information from asteroids could provide a unique insight into the development of the solar system. Here we present time-resolved records of magnetic activity on the main-group pallasite parent body and (16) Psyche, obtained using newly-developed nanomagnetic imaging techniques. For the pallasite parent body, the inferred field direction remained relatively constant and the intensity was initially stable at ~100 μT before it decreased in two discrete steps down to 0 μT. We interpret this behaviour as due to vigorous dynamo activity driven by compositional convection in the core, ultimately transitioning from a dipolar to multipolar field as the inner core grew from the bottom-up. For Psyche (measured from IVA iron meteorites), the inferred field direction reversed, while the intensity remained stable at >50 μT. Psyche cooled rapidly as an unmantled core, although the resulting thermal convection alone cannot explain these observations. Instead, this behaviour required top-down core solidification, and is attributed either to compositional convection (if the core also solidified from the bottom-up) or convection generated directly by top-down solidification (e.g. Fe-snow). The mechanism governing convection in small body cores is an open question (due partly to uncertainties in the direction of core solidification), and these observations suggest that unconventional (i.e. not thermal) mechanisms acted in the early solar system. These mechanisms are very efficient at generating convection, implying a long-lasting and widespread epoch of dynamo activity among small bodies in the early solar system.

Treating presbyopia without spectacles

NASA Astrophysics Data System (ADS)

Xu, Renfeng

Both multifocal optics and small pupils can increase the depth of focus (DoF) of presbyopes. This thesis will evaluate some of the unique challenges faced by each of these two strategies. First, there is no single spherical refracting lens that can focus all parts of the pupil of an aberrated eye. What is the objective and subjective spherical refractive error (Rx) for such an eye, and does it vary with the amount of primary SA? Using both computational modeling and psychophysical methods, we found that high levels of positive Seidel SA caused both objective and subjective refractions to become myopic. Significantly, this refractive shift varied with stimulus spatial frequency and subjective criterion. Second, although secondary SA can dramatically expand DoF, we show that this is mostly due to the lower order components within this polynomial, which can also change spherical Rx. Also, the r6 term that defines secondary SA actually narrows rather than expands DoF, when in the presence of the r4 term within Z60. Finally, as retinal illuminance drops, neural thresholds are elevated due to increased problems of photon noise. We asked if the gains in near and distant vision of presbyopes anticipated at high light levels would be cancelled or even reversed at low light levels because of the additional reduction in retinal illuminance contributed by small pupils. We found that when light levels are > 2 cd/m2, a small pupil with a diameter of 2--3mm improves near image quality, near visual acuity, and near reading speed without significant loss of distance image quality and distance vision. This result gains added significance because we also showed that low light level text in the urban environment always has luminance levels > 2 cd/m2. In conclusion, both small pupils and multifocal optics face significant challenges as near vision aids for presbyopes. However, some of the confounding effects of elevated SA levels are avoided by using small pupils to expand DoF, which can provide improved near and distance vision at most light levels encountered while reading.

The Mass of the Milky Way via HST Proper Motions of Satellite Objects

NASA Astrophysics Data System (ADS)

Sohn, Sangmo Tony; van der Marel, Roeland

2018-01-01

The Universe evolves hierarchically with small structures merging and falling in to form bigger structures. Due to its proximity, the Milky Way (MW) is the best place to witness and study these hierarchical processes in action as evidenced by e.g., the many stellar streams found in MW halo. Stellar systems in the MW halo have therefore become the benchmark for testing many aspects of cosmological theories. Despite the advances in both observational and theoretical areas in the last decade or so, the total mass and mass profile of the MW still remain poorly constrained, mainly due to the limited information on the transverse motions of satellite objects in the MW halo. As part of our HSTPROMO collaboration, we have been measuring proper motions of stars, globular clusters, and satellite galaxies in the MW halo to remedy this situation. In this contribution, I will present results from our recent studies, and report our progress of ongoing projects.

Effect of Body Nose Shape on the Propulsive Efficiency of a Propeller

NASA Technical Reports Server (NTRS)

Stickle, George W; Crigler, John L; Naiman, Irven

1941-01-01

Report presents the results of an investigation of the propulsive efficiency of three adjustable propellers of 10-foot diameter operated in front of four body nose shapes, varying from streamline nose that continued through the propeller plane in the form of a large spinner to a conventional open-nose radial-engine cowling. One propeller had airfoil sections close to the hub, the second had conventional round blade shanks, and the third differed from the second only in pitch distribution. The blade-angle settings ranged from 20 degrees to 55 degrees at the 0.75 radius. The effect of the body nose shape on propulsive efficiency may be divided into two parts: (1) the change in the body drag due to the propeller slipstream and (2) the change in propeller load distribution due to the change in velocity caused by the body. For the nose shape tested in the report, the first effect is shown to be very small; therefore, the chief emphasis of the report is confined to the second effect.

Diffraction, chopping, and background subtraction for LDR

NASA Technical Reports Server (NTRS)

Wright, Edward L.

1988-01-01

The Large Deployable Reflector (LDR) will be an extremely sensitive infrared telescope if the noise due to the photons in the large thermal background is the only limiting factor. For observations with a 3 arcsec aperture in a broadband at 100 micrometers, a 20-meter LDR will emit 10(exp 12) per second, while the photon noise limited sensitivity in a deep survey observation will be 3,000 photons per second. Thus the background subtraction has to work at the 1 part per billion level. Very small amounts of scattered or diffracted energy can be significant if they are modulated by the chopper. The results are presented for 1-D and 2-D diffraction calculations for the lightweight, low-cost LDR concept that uses an active chopping quaternary to correct the wavefront errors introduced by the primary. Fourier transforms were used to evaluate the diffraction of 1 mm waves through this system. Unbalanced signals due to dust and thermal gradients were also studied.

Sustainable Agro-Industrial Ecology Concept of the Madura Island

NASA Astrophysics Data System (ADS)

Widjaya, Joyce Martha; Tanuwidjaja, Gunawan

2017-07-01

Madura as one small island in East Java Province, Indonesia faced many challenges due to limited transportation connectivity, limited water resources and karst geology. Due to this reasons, the Government of Indonesia proposed a strategic plan to improve the development of the island to Surabaya, the largest port for the Eastern of Indonesia. It was started with building the Surabaya - Madura (SuraMadu) Bridge with 5.7 km length in 2003. The bridge was finally completed in 2009, improving the traffic flow into the island and development of Madura Island. Unfortunately, the strategy would not be comprehensive without strategic development of the Madura Island, especially in Bangkalan District (Kabupaten Bangkalan). The Central Government has proposed a Green Industry with zero waste and clean energy concept. This industry and port would process the agriculture products from Madura for the export and Eastern part of Indonesia market. Therefore, an industrial ecology concept was needed to achieve the sustainable green industry for Eastern of Indonesia.

Right hemisphere advantage for social recognition in the chick.

PubMed

Vallortigara, G

1992-09-01

Recognition of familiar and unfamiliar conspecifics was studied in pair-reared chicks tested binocularly or with only one eye in use. Chicks were tested on day 3 in pairs composed of either cagemates or strangers. Social discrimination, as measured by the ratio "number of pecks at the strangers/total number of pecks" was impaired in right-eyed chicks with respect to left-eyed and binocular chicks. Male chicks showed higher levels of social pecking than females, and chicks that used both eyes showed higher pecking than monocular chicks. There were no significant differences in the total number of pecks (i.e. pecks at companions plus pecks at strangers) between right- and left-eyed chicks: the impairment in social discrimination of right-eyed chicks seemed to be due partly to a reduction in pecking at strangers and partly to an increase in pecking at companions. It is suggested that neural structures fed by the left eye (mainly located at the right hemisphere) are better at processing and/or storing of visual information which allows recognition of individual conspecifics. This may be part of a wider tendency to respond to small changes in any of a variety of intrinsic stimulus properties.

Vanishing river ice cover in the lower part of the Danube basin - signs of a changing climate.

PubMed

Ionita, M; Badaluta, C -A; Scholz, P; Chelcea, S

2018-05-21

Many of the world's largest rivers in the extra tropics are covered with ice during the cold season, and in the Northern Hemisphere approximately 60% of the rivers experience significant seasonal effects of river ice. Here we present an observational data set of the ice cover regime for the lower part of the Danube River which spans over the period 1837-2016, and its the longest one on record over this area. The results in this study emphasize the strong impact of climate change on the occurrence of ice regime especially in the second part of the 20 th century. The number of ice cover days has decreased considerably (~28days/century) mainly due to an increase in the winter mean temperature. In a long-term context, based on documentary evidences, we show that the ice cover occurrence rate was relatively small throughout the Medieval Warm Period (MWP), while the highest occurrence rates were found during the Maunder Minimum and Dalton Minimum periods. We conclude that the river ice regime can be used as a proxy for the winter temperature over the analyzed region and as an indicator of climate-change related impacts.

Interactions of GRF(1-29)NH2 with plasma proteins and their effects on the release of the peptide from a PLAGA matrix.

PubMed

Mariette, B; Coudane, J; Vert, M

2005-09-02

The administration of the GRF(1-29)NH2 Growth Hormone Releasing Hormone analog is known as relevant of the concept of drug delivery system using a bioresorbable matrix. However, the release of this peptide from poly(dl-lactic acid-co-glycolic acid) matrices is affected by its insolubility at neutral in salted media and in plasma as well. In order to investigate the origin and the nature of the insolubility in these media in more details, the precipitates collected when the peptide was set in contact with saline, isotonic pH=7.4 phosphate buffer and plasma were analyzed by various techniques, namely weighting, gel chromatography, 1D- and 2D-immunoelectrophoresis, and dialysis to discern the soluble from the insoluble or aggregated fractions. It is shown that precipitation in protein-free salted media is due to a salting out phenomenon complemented by the neutralization of the solubilizing electrostatic charges in the isotonic buffer. In contrast, the precipitation in plasma is due to inter polyelectrolyte-type complexation that involved polyanionic proteins having a rather low isoelectric point like albumin, transferin, haptoglobulin and IgG immunoglobulins. When a rather large quantity of GRF(1-29)NH2 was entrapped in bioresorbable pellets working at a percolating regime after subcutaneous implantation in rats, the peptide was slowly released despite the complexation with plasma proteins. However only a very small part of the peptide was found in blood, this small part being still large enough to cause a detectable increase of the circulating growth hormone concentration. Attempts made to increase the solubility of the peptide in plasma were successful when the peptide was combined with arginine, an amino acid known to promote the poor hormonal activity of injected GRF(1-29)NH2 solutions under clinical conditions.

Negative and positive life events are associated with small but lasting change in neuroticism.

PubMed

Jeronimus, B F; Ormel, J; Aleman, A; Penninx, B W J H; Riese, H

2013-11-01

High neuroticism is prospectively associated with psychopathology and physical health. However, within-subject changes in neuroticism due to life experiences (LEs) or state effects of current psychopathology are largely unexplored. In this 2-year follow-up study, four hypotheses were tested: (1) positive LEs (PLEs) decrease and negative LEs (NLEs) increase neuroticism; (2) LE-driven change in neuroticism is partly long-lasting; and (3) partly independent of LE-driven changes in anxiety/depression; and (4) childhood adversity (before age 16 years) moderates the influence of NLEs/PLEs on neuroticism scores in adult life. Data came from the Netherlands Study of Depression and Anxiety [NESDA, n = 2981, mean age 41.99 years (s.d. = 13.08), 66.6% women]. At follow-up (T₂) we assessed PLEs/NLEs with the List of Threatening Experiences (LTE) over the prior 24 months and categorized them over recent and distant PLE/NLE measures (1-3 and 4-24 months prior to T₂ respectively) to distinguish distant NLE/PLE-driven change in trait neuroticism (using the Dutch version of the Neuroticism-Extroversion-Openness Five Factor Inventory, NEO-FFI) from state deviations due to changes in symptoms of depression (self-rated version of the 30-item Inventory of Depressive Symptomatology, IDS-SR30) and anxiety (Beck Anxiety Inventory, BAI). Distant NLEs were associated with higher and distant PLEs with lower neuroticism scores. The effects of distant LEs were weak but long-lasting, especially for distant PLEs. Distant NLE-driven change in neuroticism was associated with change in symptoms of anxiety/depression whereas the effect of distant PLEs on neuroticism was independent of any such changes. Childhood adversity weakened the impact of distant NLEs but enhanced the impact of distant PLEs on neuroticism. Distant PLEs are associated with small but long-lasting decreases in neuroticism regardless of changes in symptom levels of anxiety/depression. Long-lasting increases in neuroticism associated with distant NLEs are mediated by anxiety/depression.

Parts Specialist. Teacher Edition. Second Edition.

ERIC Educational Resources Information Center

Fuqua, Lou; And Others

This set of instructional materials provides secondary and postsecondary students with an opportunity to explore the career choices available in the parts merchandising industry. The skills presented are useful to any student pursuing a career in auto parts, heavy equipment parts, small engine parts, tractor parts, appliance parts, or for any…

A Bootstrap Approach to Martian Manufacturing

NASA Technical Reports Server (NTRS)

Dorais, Gregory A.

2004-01-01

In-Situ Resource Utilization (ISRU) is an essential element of any affordable strategy for a sustained human presence on Mars. Ideally, Martian habitats would be extremely massive to allow plenty of room to comfortably live and work, as well as to protect the occupants from the environment. Moreover, transportation and power generation systems would also require significant mass if affordable. For our approach to ISRU, we use the industrialization of the U.S. as a metaphor. The 19th century started with small blacksmith shops and ended with massive steel mills primarily accomplished by blacksmiths increasing their production capacity and product size to create larger shops, which produced small mills, which produced the large steel mills that industrialized the country. Most of the mass of a steel mill is comprised of steel in simple shapes, which are produced and repaired with few pieces of equipment also mostly made of steel in basic shapes. Due to this simplicity, we expect that the 19th century manufacturing growth can be repeated on Mars in the 21st century using robots as the primary labor force. We suggest a "bootstrap" approach to manufacturing on Mars that uses a "seed" manufacturing system that uses regolith to create major structural components and spare parts. The regolith would be melted, foamed, and sintered as needed to fabricate parts using casting and solid freeform fabrication techniques. Complex components, such as electronics, would be brought from Earth and integrated as needed. These parts would be assembled to create additional manufacturing systems, which can be both more capable and higher capacity. These subsequent manufacturing systems could refine vast amounts of raw materials to create large components, as well as assemble equipment, habitats, pressure vessels, cranes, pipelines, railways, trains, power generation stations, and other facilities needed to economically maintain a sustained human presence on Mars.

78 FR 26504 - Women-Owned Small Business Federal Contract Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-07

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 127 RIN 3245-AG55 Women-Owned Small Business Federal Contract Program AGENCY: U.S. Small Business Administration. ACTION: Interim final rule. SUMMARY: The U.S. Small Business Administration (SBA) is amending its regulations to implement Section 1697 of the...

76 FR 27952 - Small Business Size Standards: Professional, Scientific and Technical Services.

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-13

... Administration (SBA or Agency) proposed to increase small business size standards for 35 industries and one sub... SMALL BUSINESS ADMINISTRATION 13 CFR Part 121 RIN 3245-AG07 Small Business Size Standards: Professional, Scientific and Technical Services. AGENCY: U.S. Small Business Administration. ACTION: Proposed...

48 CFR 19.1303 - Status as a HUBZone small business concern.

Code of Federal Regulations, 2011 CFR

2011-10-01

... REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Historically Underutilized Business Zone (HUBZone) Program 19.1303 Status as a HUBZone small business concern. (a) Status as a HUBZone small business concern is determined by the Small Business Administration (SBA) in accordance with 13 CFR part 126. (b) If...

48 CFR 19.1303 - Status as a HUBZone small business concern.

Code of Federal Regulations, 2013 CFR

2013-10-01

... REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Historically Underutilized Business Zone (HUBZone) Program 19.1303 Status as a HUBZone small business concern. (a) Status as a HUBZone small business concern is determined by the Small Business Administration (SBA) in accordance with 13 CFR part 126. (b) If...

48 CFR 19.1303 - Status as a HUBZone small business concern.

Code of Federal Regulations, 2012 CFR

2012-10-01

... REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Historically Underutilized Business Zone (HUBZone) Program 19.1303 Status as a HUBZone small business concern. (a) Status as a HUBZone small business concern is determined by the Small Business Administration (SBA) in accordance with 13 CFR part 126. (b) If...

48 CFR 19.1303 - Status as a HUBZone small business concern.

Code of Federal Regulations, 2014 CFR

2014-10-01

... REGULATION SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS Historically Underutilized Business Zone (HUBZone) Program 19.1303 Status as a HUBZone small business concern. (a) Status as a HUBZone small business concern is determined by the Small Business Administration (SBA) in accordance with 13 CFR part 126. (b) If...

13 CFR 107.1920 - Licensee's application for exemption from a regulation in this part 107.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Licensee's application for exemption from a regulation in this part 107. 107.1920 Section 107.1920 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES Miscellaneous § 107.1920 Licensee's application...

13 CFR 107.1930 - Effect of changes in this part 107 on transactions previously consummated.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Effect of changes in this part 107 on transactions previously consummated. 107.1930 Section 107.1930 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES Miscellaneous § 107.1930 Effect of...

13 CFR 107.1930 - Effect of changes in this part 107 on transactions previously consummated.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Effect of changes in this part 107 on transactions previously consummated. 107.1930 Section 107.1930 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES Miscellaneous § 107.1930 Effect of...

13 CFR 107.1920 - Licensee's application for exemption from a regulation in this part 107.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Licensee's application for exemption from a regulation in this part 107. 107.1920 Section 107.1920 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL BUSINESS INVESTMENT COMPANIES Miscellaneous § 107.1920 Licensee's application...

13 CFR 127.700 - What penalties may be imposed under this part?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What penalties may be imposed under this part? 127.700 Section 127.700 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION WOMEN-OWNED SMALL BUSINESS FEDERAL CONTRACT ASSISTANCE PROCEDURES Penalties § 127.700 What penalties may...

18 CFR 4.103 - General provisions for case-specific exemption.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Exemption of Small Hydroelectric Power Projects of 5 Megawatts or Less § 4.103 General provisions for case-specific exemption. (a) Exemptible projects. Subject to... exempt on a case-specific basis any small hydroelectric power project from all or part of Part I of the...

18 CFR 4.103 - General provisions for case-specific exemption.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Exemption of Small Hydroelectric Power Projects of 5 Megawatts or Less § 4.103 General provisions for case-specific exemption. (a) Exemptible projects. Subject to... exempt on a case-specific basis any small hydroelectric power project from all or part of Part I of the...

18 CFR 4.103 - General provisions for case-specific exemption.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Exemption of Small Hydroelectric Power Projects of 5 Megawatts or Less § 4.103 General provisions for case-specific exemption. (a) Exemptible projects. Subject to... exempt on a case-specific basis any small hydroelectric power project from all or part of Part I of the...

18 CFR 4.103 - General provisions for case-specific exemption.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Exemption of Small Hydroelectric Power Projects of 5 Megawatts or Less § 4.103 General provisions for case-specific exemption. (a) Exemptible projects. Subject to... exempt on a case-specific basis any small hydroelectric power project from all or part of Part I of the...

18 CFR 4.103 - General provisions for case-specific exemption.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., EXEMPTIONS, AND DETERMINATION OF PROJECT COSTS Exemption of Small Hydroelectric Power Projects of 5 Megawatts or Less § 4.103 General provisions for case-specific exemption. (a) Exemptible projects. Subject to... exempt on a case-specific basis any small hydroelectric power project from all or part of Part I of the...

13 CFR 127.101 - What type of assistance is available under this part?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What type of assistance is available under this part? 127.101 Section 127.101 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION WOMEN-OWNED SMALL BUSINESS FEDERAL CONTRACT ASSISTANCE PROCEDURES General Provisions § 127.101...

SMALL CRAFT OPERATION AND NAVIGATION.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge.

THIS REFERENCE TEXTBOOK WAS PREPARED FOR USE IN THE FIRST PART OF A TWO-PART COURSE IN MARINE NAVIGATION AND SMALL CRAFT OPERATION ON INLAND AND INTERNATIONAL WATERS. THE MATERIAL WAS DEVELOPED BY AN INDIVIDUAL AUTHOR FOR USE IN TRADE SCHOOL PREPARATORY AND EXTENSION CLASSES FOR MALE ADULTS WHO PLAN TO OPERATE BOATS. IT IS MAINLY CONCERNED WITH…

13 CFR 127.500 - In what industries is a contracting officer authorized to restrict competition under this part?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false In what industries is a contracting officer authorized to restrict competition under this part? 127.500 Section 127.500 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION WOMEN-OWNED SMALL BUSINESS FEDERAL CONTRACT...

Evaluation of transport conditions for autologous bone marrow-derived mesenchymal stromal cells for therapeutic application in horses

PubMed Central

Espina, Miguel; Jülke, Henriette; Brehm, Walter; Ribitsch, Iris; Winter, Karsten

2016-01-01

Background. Mesenchymal stromal cells (MSCs) are increasingly used for clinical applications in equine patients. For MSC isolation and expansion, a laboratory step is mandatory, after which the cells are sent back to the attending veterinarian. Preserving the biological properties of MSCs during this transport is paramount. The goal of the study was to compare transport-related parameters (transport container, media, temperature, time, cell concentration) that potentially influence characteristics of culture expanded equine MSCs. Methods. The study was arranged in three parts comparing (I) five different transport containers (cryotube, two types of plastic syringes, glass syringe, CellSeal), (II) seven different transport media, four temperatures (4 °C vs. room temperature; −20 °C vs. −80 °C), four time frames (24 h vs. 48 h; 48 h vs. 72 h), and (III) three MSC concentrations (5 × 106, 10 × 106, 20 × 106 MSC/ml). Cell viability (Trypan Blue exclusion; percent and total number viable cell), proliferation and trilineage differentiation capacity were assessed for each test condition. Further, the recovered volume of the suspension was determined in part I. Each condition was evaluated using samples of six horses (n = 6) and differentiation protocols were performed in duplicates. Results. In part I of the study, no significant differences in any of the parameters were found when comparing transport containers at room temperature. The glass syringe was selected for all subsequent evaluations (highest recoverable volume of cell suspension and cell viability). In part II, media, temperatures, or time frames had also no significant influence on cell viability, likely due to the large number of comparisons and small sample size. Highest cell viability was observed using autologous bone marrow supernatant as transport medium, and “transport” at 4 °C for 24 h (70.6% vs. control group 75.3%); this was not significant. Contrary, viability was unacceptably low (<40%) for all freezing protocols at −20 °C or −80 °C, particularly with bone marrow supernatant or plasma and DMSO. In part III, various cell concentrations also had no significant influence on any of the evaluated parameters. Chondrogenic differentiation showed a trend towards being decreased for all transport conditions, compared to control cells. Discussion. In this study, transport conditions were not found to impact viability, proliferation or ability for trilineage differentiation of MSCs, most likely due to the small sample size and large number of comparisons. The unusual low viability after all freezing protocols is in contrast to previous equine studies. Potential causes are differences in the freezing, but also in thawing method. Also, the selected container (glass syringe) may have impacted viability. Future research may be warranted into the possibly negative effect of transport on chondrogenic differentiation. PMID:27019778

77 FR 21866 - Safety Zone; Sunken Vessel, Puget Sound, Everett, WA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-12

... significant regulatory action due to being limited in size and duration. Small Entities Under the Regulatory... impact on a substantial number of small entities. The term ``small entities'' comprises small businesses... duration. Assistance for Small Entities Under section 213(a) of the Small Business Regulatory Enforcement...

40 CFR Table 1 to Subpart Hhh of... - Emission Limits for Small Rural, Small, Medium, and Large HMIWI

Code of Federal Regulations, 2011 CFR

2011-07-01

..., Medium, and Large HMIWI 1 Table 1 to Subpart HHH of Part 62 Protection of Environment ENVIRONMENTAL... 62—Emission Limits for Small Rural, Small, Medium, and Large HMIWI Pollutant Units (7 percent oxygen, dry basis at standard conditions) Emission limits HMIWI size Small rural Small Medium Large...

40 CFR Table 1 to Subpart Hhh of... - Emission Limits for Small Rural, Small, Medium, and Large HMIWI

Code of Federal Regulations, 2012 CFR

2012-07-01

..., Medium, and Large HMIWI 1 Table 1 to Subpart HHH of Part 62 Protection of Environment ENVIRONMENTAL... 62—Emission Limits for Small Rural, Small, Medium, and Large HMIWI Pollutant Units (7 percent oxygen, dry basis at standard conditions) Emission limits HMIWI size Small rural Small Medium Large...

40 CFR Table 1 to Subpart Hhh of... - Emission Limits for Small Rural, Small, Medium, and Large HMIWI

Code of Federal Regulations, 2010 CFR

2010-07-01

..., Medium, and Large HMIWI 1 Table 1 to Subpart HHH of Part 62 Protection of Environment ENVIRONMENTAL... 62—Emission Limits for Small Rural, Small, Medium, and Large HMIWI Pollutant Units (7 percent oxygen, dry basis at standard conditions) Emission limits HMIWI size Small rural Small Medium Large...

Decolorization of Malachite Green and Crystal Violet by Waterborne Pathogenic Mycobacteria

PubMed Central

Jones, Jefferson J.; Falkinham III, Joseph O.

2003-01-01

Mycobacterium avium, Mycobacterium intracellulare, Mycobacterium scrofulaceum, Mycobacterium marinum, and Mycobacterium chelonae tolerate high concentrations of the dyes malachite green and crystal violet. Cells of strains of those species decolorized (reduced) both malachite green and crystal violet. Because decolorized malachite green lacked antimicrobial activity, the resistance of these mycobacteria could be due, in part, to their ability to decolorize the dyes. Small amounts of malachite green and its reduced, decolorized product were detected in the lipid fraction of M. avium strain A5 cells grown in the presence of malachite green, suggesting that a minor component of resistance could be due to sequestering the dyes in the extensive mycobacterial cell surface lipid. The membrane fraction of M. avium strain A5 had at least a fivefold-higher specific decolorization rate than did the crude extract, suggesting that the decolorization activity is membrane associated. The malachite green-decolorizing activity of the membrane fraction of M. avium strain A5 was abolished by either boiling or proteinase exposure, suggesting that the decolorizing activity was due to a protein. Decolorization activity of membrane fractions was stimulated by ferrous ion and inhibited by dinitrophenol and metyrapone. PMID:12821489

Small Intestine Disorders

MedlinePlus

Your small intestine is the longest part of your digestive system - about twenty feet long! It connects your stomach ... many times to fit inside your abdomen. Your small intestine does most of the digesting of the ...

Interpreting Space-Mission LET Requirements for SEGR in Power MOSFETs

NASA Technical Reports Server (NTRS)

Lauenstein, Jean-Marie; Ladbury, Ray; Goldsman, Neil; Kim, Hak; Batchelor, David; Phan, Anthony

2010-01-01

Single-event gate rupture (SEGR) is a potentially catastrophic failure mechanism of power MOSFETs biased in the off-state. In part due to the severity of-SEGR consequences and in part due to the difficulty of accurated SEGR rate estimation, SEGR mitigation me1hodologies emphasize risk avoidance, using heavy-ion accelerator testing to define safe operating conditions for a surface-incident linear energy transfer {LET). This "safe-operating area" (SOA) within which the device may be biased without experiencing SEGR is then often derated by a prescribed factor to ensure low risk of SEGR. Although research in 1996 indicated that such LET-based SEGR hardness requiremen1s could provide false assurance of safe operation unless one also considered· ion energy], most mission SEGR requirements are still specified in terms of surface-incident LET. Moreover, terrestrial SEGR tests at a given surface-incident LET are limited by the small number of ion species and energies available at heavy-ion accelerators. In comparison, the on-orbit radiation environment is composed of all of the naturally-occurring elements with peak fluxes at nearly GeV/nucleon energies. The primary objective of this study is to examine whether typical derating of high-energy heavy-ion accelerator test data bounds the risk for SEGR from higher-energy on-orbit ions with the mission LET requirement.

3-D velocity structure model for long-period ground motion simulation of the hypothetical Nankai Earthquake

NASA Astrophysics Data System (ADS)

Kagawa, T.; Petukhin, A.; Koketsu, K.; Miyake, H.; Murotani, S.; Tsurugi, M.

2010-12-01

Three dimensional velocity structure model of southwest Japan is provided to simulate long-period ground motions due to the hypothetical subduction earthquakes. The model is constructed from numerous physical explorations conducted in land and offshore areas and observational study of natural earthquakes. Any available information is involved to explain crustal structure and sedimentary structure. Figure 1 shows an example of cross section with P wave velocities. The model has been revised through numbers of simulations of small to middle earthquakes as to have good agreement with observed arrival times, amplitudes, and also waveforms including surface waves. Figure 2 shows a comparison between Observed (dash line) and simulated (solid line) waveforms. Low velocity layers have added on seismological basement to reproduce observed records. The thickness of the layer has been adjusted through iterative analysis. The final result is found to have good agreement with the results from other physical explorations; e.g. gravity anomaly. We are planning to make long-period (about 2 to 10 sec or longer) simulations of ground motion due to the hypothetical Nankai Earthquake with the 3-D velocity structure model. As the first step, we will simulate the observed ground motions of the latest event occurred in 1946 to check the source model and newly developed velocity structure model. This project is partly supported by Integrated Research Project for Long-Period Ground Motion Hazard Maps by Ministry of Education, Culture, Sports, Science and Technology (MEXT). The ground motion data used in this study were provided by National Research Institute for Earth Science and Disaster Prevention Disaster (NIED). Figure 1 An example of cross section with P wave velocities Figure 2 Observed (dash line) and simulated (solid line) waveforms due to a small earthquake

Re-sequencing transgenic plants revealed rearrangements at T-DNA inserts, and integration of a short T-DNA fragment, but no increase of small mutations elsewhere.

PubMed

Schouten, Henk J; Vande Geest, Henri; Papadimitriou, Sofia; Bemer, Marian; Schaart, Jan G; Smulders, Marinus J M; Perez, Gabino Sanchez; Schijlen, Elio

2017-03-01

Transformation resulted in deletions and translocations at T-DNA inserts, but not in genome-wide small mutations. A tiny T-DNA splinter was detected that probably would remain undetected by conventional techniques. We investigated to which extent Agrobacterium tumefaciens-mediated transformation is mutagenic, on top of inserting T-DNA. To prevent mutations due to in vitro propagation, we applied floral dip transformation of Arabidopsis thaliana. We re-sequenced the genomes of five primary transformants, and compared these to genomic sequences derived from a pool of four wild-type plants. By genome-wide comparisons, we identified ten small mutations in the genomes of the five transgenic plants, not correlated to the positions or number of T-DNA inserts. This mutation frequency is within the range of spontaneous mutations occurring during seed propagation in A. thaliana, as determined earlier. In addition, we detected small as well as large deletions specifically at the T-DNA insert sites. Furthermore, we detected partial T-DNA inserts, one of these a tiny 50-bp fragment originating from a central part of the T-DNA construct used, inserted into the plant genome without flanking other T-DNA. Because of its small size, we named this fragment a T-DNA splinter. As far as we know this is the first report of such a small T-DNA fragment insert in absence of any T-DNA border sequence. Finally, we found evidence for translocations from other chromosomes, flanking T-DNA inserts. In this study, we showed that next-generation sequencing (NGS) is a highly sensitive approach to detect T-DNA inserts in transgenic plants.

Basilar artery atherosclerotic plaques in paramedian and lacunar pontine infarctions: a high-resolution MRI study.

PubMed

Klein, Isabelle F; Lavallée, Philippa C; Mazighi, Mikael; Schouman-Claeys, Elisabeth; Labreuche, Julien; Amarenco, Pierre

2010-07-01

Pontine infarction is most often related to basilar artery atherosclerosis when the lesion abuts on the basal surface (paramedian pontine infarction), whereas small medial pontine lesion is usually attributed to small vessel lipohyalinosis. A previous study has found that high-resolution MRI can detect basilar atherosclerotic plaques in up to 70% of patient with paramedian pontine infarction, even in patients with normal angiograms, but none has evaluated the presence of basilar artery plaque by high-resolution MRI in patients with small medial pontine lesion in the medial part of the pons. Consecutive patients with pontine infarction underwent basilar angiography using time-of-flight and contrast-enhanced 3-dimensional MR angiography to assess the presence of basilar artery stenosis and high-resolution MRI to assess the presence of atherosclerotic plaque. Basilar artery angiogram was scored as "normal," "irregular," or "stenosed" >or=30%" and basilar artery by high-resolution MRI was scored as "normal" or "presence of plaque." Medial pontine infarcts were divided into paramedian pontine infarction and small medial pontine lesion groups. Forty-one patients with pontine infarction were included, 26 with paramedian pontine infarction and 15 with small medial pontine lesion. High-resolution MRI detected basilar artery atherosclerosis in 42% of patients with a pontine infarction and normal basilar angiograms. Among patients with paramedian pontine infarction, 65% had normal basilar angiograms but 77% had basilar artery atherosclerosis detected on high-resolution MRI. Among patients with small medial pontine lesion, 46% had normal basilar angiograms but 73% had basilar artery plaques detected on by high-resolution MRI. This study suggests that medial pontine lacunes may be due to a penetrating artery disease secondary to basilar artery atherosclerosis. High-resolution MRI could help precise stroke subtyping.

76 FR 63151 - Small Business Jobs Act: 504 Loan Program Debt Refinancing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-12

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 120 RIN 3245-AG17 Small Business Jobs Act: 504 Loan Program Debt Refinancing AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: This rule finalizes the interim final rule that implemented section 1122 of the Small Business Jobs Act of...

75 FR 63110 - Small Business Investment Companies-Conflicts of Interest and Investment of Idle Funds

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-14

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 107 RIN 3245-AF56 Small Business Investment Companies--Conflicts of Interest and Investment of Idle Funds AGENCY: U.S. Small Business Administration. ACTION... small business investment company (SBIC) from providing financing to an Associate, as defined in the...

13 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 113

Code of Federal Regulations, 2014 CFR

2014-01-01

... development company loans (501) and their small business concerns Small Business Investment Act, Title V and Small Business Act, sec. 7(a)(13). Debtor State and local development company loans (502) and their...). Debtor certified development companies (503) and their small business concerns Small Business Investment...

13 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 113

Code of Federal Regulations, 2013 CFR

2013-01-01

... development company loans (501) and their small business concerns Small Business Investment Act, Title V and Small Business Act, sec. 7(a)(13). Debtor State and local development company loans (502) and their...). Debtor certified development companies (503) and their small business concerns Small Business Investment...

13 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 113

Code of Federal Regulations, 2011 CFR

2011-01-01

... development company loans (501) and their small business concerns Small Business Investment Act, Title V and Small Business Act, sec. 7(a)(13). Debtor State and local development company loans (502) and their...). Debtor certified development companies (503) and their small business concerns Small Business Investment...

13 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 113

Code of Federal Regulations, 2012 CFR

2012-01-01

... development company loans (501) and their small business concerns Small Business Investment Act, Title V and Small Business Act, sec. 7(a)(13). Debtor State and local development company loans (502) and their...). Debtor certified development companies (503) and their small business concerns Small Business Investment...

Seismic stratigraphic characteristics of upper Louisiana continental slope: an area east of Green Canyon

USGS Publications Warehouse

Bouma, Arnold H.; Feeley, Mary H.; Kindinger, Jack G.; Stelting, Charles E.; Hilde, Thomas W.C.

1981-01-01

A high-resolution seismic reflection survey was conducted in a small area of the upper Louisiana Continental Slope known as Green Canyon Area. This area includes tracts 427, 428, 471, 472, 515, and 516, that will be offered for sale in March 1982 as part of Lease Sale 67.The sea floor of this region is, slightly hummocky and is underlain by salt diapirs that are mantled by early Tertiary shale. Most of the shale is overlain by younger Tertiary and Quaternary deposits, although locally some of the shale protrudes the sea floor. Because of proximity to older Mississippi River sources, the sediments are thick. The sediment cover shows an abundance of geologic phenomena such as horsts, grabens, growth faults, normal faults, and consolidation faults, zones with distinct and indistinct parallel reflections, semi-transparent zones, distorted zones, and angular unconformities.The major feature of this region is a N-S linear zone of uplifted and intruded sedimentary deposits formed due to diapiric intrusion.Small scale graben development over the crest of the structure can be attributed to extension and collapse. Large scale undulations of reflections well off the flanks of the uplifted structure suggest sediment creep and slumping. Dipping of parallel reflections show block faulting and tilting.Air gun (5 and 40 cubic inch) records reveal at least five major sequences that show masked onlap and slumping in their lower parts grading into more distinct parallel reflections in their upper parts. Such sequences can be related to local uplift and sea level changes. Minisparker records of this area show similar sequences but on a smaller scale. The distinct parallel reflections often onlap the diapir flanks. The highly reflective parts of these sequences may represent turbidite-type deposition, possibly at times of lower sea level. The acoustically more transparent parts of each sequence may represent deposits containing primarily hemipelagic and pelagic sediment.A complex ridge system is present along the west side of the area and distinct parallel reflections onlap onto this structure primarily from the east. Much of this deposition may be ascribed to sedimentation within a submarine canyon whose position is controlled by this ridge.

40 CFR Table 1 to Subpart B of... - Section 112(j) Part 2 Application Due Dates

Code of Federal Regulations, 2011 CFR

2011-07-01

... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...—Section 112(j) Part 2 Application Due Dates Due date MACT standard 10/30/03 Combustion Turbines.Lime...

40 CFR Table 1 to Subpart B of... - Section 112(j) Part 2 Application Due Dates

Code of Federal Regulations, 2012 CFR

2012-07-01

... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...—Section 112(j) Part 2 Application Due Dates Due date MACT standard 10/30/03 Combustion Turbines.Lime...

40 CFR Table 1 to Subpart B of... - Section 112(j) Part 2 Application Due Dates

Code of Federal Regulations, 2014 CFR

2014-07-01

... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...—Section 112(j) Part 2 Application Due Dates Due date MACT standard 10/30/03 Combustion Turbines.Lime...

40 CFR Table 1 to Subpart B of... - Section 112(j) Part 2 Application Due Dates

Code of Federal Regulations, 2013 CFR

2013-07-01

... CATEGORIES Requirements for Control Technology Determinations for Major Sources in Accordance With Clean Air...—Section 112(j) Part 2 Application Due Dates Due date MACT standard 10/30/03 Combustion Turbines.Lime...

Two cases of methyl alcohol intoxication by sub-chronic inhalation and dermal exposure during aluminum CNC cutting in a small-sized subcontracted factory.

PubMed

Ryu, Jia; Lim, Key Hwan; Ryu, Dong-Ryeol; Lee, Hyang Woon; Yun, Ji Young; Kim, Seoung-Wook; Kim, Ji-Hoon; Jung-Choi, Kyunghee; Kim, Hyunjoo

2016-01-01

Methyl alcohol poisoning has been mainly reported in community. Two cases of methyl alcohol poisoning occurred in a small-sized subcontracted factory which manufactured smartphone parts in Korea. One young female patient presented with dyspnea and visual disturbance. Another young male patient presented with visual disturbance and myalgia. They treated with sodium bicarbonate infusion and hemodialysis for metabolic acidosis. In addition, he received ethyl alcohol per oral treatment. Her and his urinary methyl alcohol concentration was detected as 7.632 mg/L, 46.8 mg/L, respectively, although they were treated hemodialysis. Results of the working environment measurement showed that the concentration of methyl alcohol (1030.1-2220.5 ppm) in the air exceeded the time weighted average (200 ppm). They were diagnosed with optic neuropathy due to methyl alcohol poisoning and still have visual impairment. Workers who hired as dispatched employees in a small-sized subcontracted factory were exposed to high concentrations of methyl alcohol. The workplace had poor ventilation system. In addition, workers did not wear proper personal protect equipment. Working environment measurement and annual chekups for workers were not performed. They were in a blind spot to occupational safety and health. More attention is needed to protect vulnerable workers' health.

Mycoplasma agalactiae, an Etiological Agent of Contagious Agalactia in Small Ruminants: A Review

PubMed Central

Kumar, Amit; Rahal, Anu; Verma, Amit Kumar

2014-01-01

Mycoplasma agalactiae is one of the causal agents of classical contagious agalactia (CA), a serious, economically important but neglected enzootic disease of small ruminants. It occurs in many parts of the world and most notably in the Mediterranean Basin. Following the infection common complications are septicaemia, mastitis, arthritis, pleurisy, pneumonia, and keratoconjunctivitis. Primary or tentative diagnosis of the organism is based upon clinical signs. Various serological tests, namely, growth precipitation, immunofluorescence, complement fixation test, haemagglutination inhibition, agglutination, immunodiffusion, enzyme immunoassays, immunoelectrophoresis, blotting techniques, and others, are available. Molecular tools seem to be much more sensitive, specific, and faster and help to differentiate various strains. The real-time PCR, multiplex PCR, quantitative PCR, PCR-RFLP, MLST, and gene probes, complementary to segments of chromosomal DNA or 16S ribosomal RNA (rRNA), have strengthened the diagnosis of M. agalactiae. Both live attenuated and adjuvant (alum precipitated or saponified) inactivated vaccines are available with greater use of inactivated ones due to lack of side effects. The present review discusses the etiology, epidemiology, pathogenesis, and clinical signs of contagious agalactia in small ruminants along with trends and advances in its diagnosis, treatment, vaccination, prevention, and control strategies that will help in countering this disease. PMID:25097796

ISO observations of the reflection nebula Ced 201: evolution of carbonaceous dust

NASA Astrophysics Data System (ADS)

Cesarsky, D.; Lequeux, J.; Ryter, C.; Gérin, M.

2000-02-01

We present spectrophotometric imaging mid-IR observations of the reflection nebula Ced 201. Ced 201 is a part of a molecular cloud illuminated by a B9.5V star moving through it at more than 12 km s-1. The spectra of Ced 201 give evidence for transformation of very small carbonaceous grains into the carriers of the Aromatic Infrared Bands (AIBs), due to the radiation field of the illuminating star and/or to shock waves created by its motion. These very small grains emit mainly very broad bands and a continuum. We suggest that they are present everywhere in the interstellar medium but can only be detected in the mid-IR under special circumstances such as those prevailing in this reflection nebula. The efficiency of energy conversion of stellar light into mid-infrared emission is 7.5% for both the very small grains and the AIB carriers, and the fraction of interstellar carbon locked in these emitters is approximately 15%. Based on observations at the Cal Tech submillimeter observatory (CSO) and with ISO, an ESA project with instruments funded by ESA member states (especially the PI countries: France, Germany, the Netherlands and the United Kingdom) and with the participation of ISAS and NASA.

Field Performance of Recycled Plastic Foundation for Pipeline

PubMed Central

Kim, Seongkyum; Lee, Kwanho

2015-01-01

The incidence of failure of embedded pipelines has increased in Korea due to the increasing applied load and the improper compaction of bedding and backfill materials. To overcome these problems, a prefabricated lightweight plastic foundation using recycled plastic was developed for sewer pipelines. A small scale laboratory chamber test and two field tests were conducted to verify its construction workability and performance. From the small scale laboratory chamber test, the applied loads at 2.5% and 5.0% of deformation were 3.45 kgf/cm2 and 5.85 kgf/cm2 for Case S1, and 4.42 kgf/cm2 and 6.43 kgf/cm2 for Case S2, respectively. From the first field test, the vertical deformation of the recycled plastic foundation (Case A2) was very small. According to the analysis based on the PE pipe deformation at the connection (CN) and at the center (CT), the pipe deformation at each part for Case A1 was larger than that for Case A2, which adopted the recycled lightweight plastic foundation. From the second field test, the measured maximum settlements of Case B1 and Case B2 were 1.05 cm and 0.54 cm, respectively. The use of a plastic foundation can reduce the settlement of an embedded pipeline and be an alternative construction method.

Bases for Curriculum Decisions for Development of Curriculum for Minorities in Small Business Ownership and Management, Post-Secondary Level.

ERIC Educational Resources Information Center

Green (Del) Associates, Foster City, CA.

This document presents in three parts the bases for curriculum decisions in the development of a post-secondary curriculum for minorities in small business ownership and management. Part 1 covers the general curriculum decisions, including the following items: selection of curriculum testing site; academic credits; class scheduling; student…

12 CFR Appendix C to Part 225 - Small Bank Holding Company Policy Statement

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 3 2011-01-01 2011-01-01 false Small Bank Holding Company Policy Statement C Appendix C to Part 225 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM BANK HOLDING COMPANIES AND CHANGE IN BANK CONTROL (REGULATION Y) Pt. 225, App. C...

Discovery of kimberlite in a magnetically noisy environment: a case study of the Syferfontein and Goedgevonden kimberlites (Invited)

NASA Astrophysics Data System (ADS)

Webb, S. J.; Van Buren, R.

2013-12-01

Airborne geophysical methods play an important role in the exploration for kimberlites. As regions become more intensively explored, smaller kimberlites, which can be extremely difficult to find, are being targeted. These smaller kimberlites, as evidenced by the M-1 Maarsfontein pipe in the Klipspringer cluster in South Africa, can be highly profitable. The Goedgevonden and Syferfontein pipes are small kimberlites (~0.2 ha) ~25 km NNE of Klerksdorp in South Africa. The Goedgevonden pipe has been known since the 1930s and is diamondiferous, but not commercially viable due to small stone size and low quality of stones. In the early 1990s, Gold Fields used this pipe as a typical kimberlite to collect example geophysical data. The nearby (~1 km to the east) Syferfontein pipe is not diamondiferous but was discovered in 1994 as part of a speculative airborne EM survey conducted by Gold Fields and Geodass (now CGG) as part of their case study investigations. Both kimberlites have had extensive ground geophysical survey data collected and have prominent magnetic, gravity and EM responses that aided in the delineation of the pipes. These pipes represent a realistic and challenging case study target due to their small size and the magnetically noisy environment into which they have been emplaced. The discovery of the Syferfontein pipe in 1994 stimulated further testing of airborne methods, especially as the surface was undisturbed. These pipes are located in a region that hosts highly variably magnetized Hospital Hill shales, dolerite dykes and Ventersdorp lavas, a 2-3 m thick resistive ferricrete cap and significant cultural features such as an electric railroad and high tension power line. Although the kimberlites both show prominent magnetic anomalies on ground surveys, the airborne data are significantly noisy and the pipes do not show up as well determined targets. However, the clay-rich weathered zone of the pipes provides an ideal target for the EM method, and both pipes have significant responses on the DIGHEM system. The HELITEM, helicopter borne time domain EM system also clearly mapped both pipes as did the TEMPEST time domain system from a fixed wing platform. Although there are other EM anomalies in the area, these are easily associated with dykes in the area based on joint interpretation with the aeromagnetic data. The lack of kimberlite exploration in this region is likely due to the lack of alluvial diamonds, the magnetically noisy environment, and the well-developed ferricrete and calcrete layers on surface which trap and resorb heavy minerals such as garnet, traditionally used in soil sampling. In this challenging environment, airborne EM combined with magnetic and ground geophysical methods for ground truthing are viable exploration methods.

Disclosure of Child Sexual Abuse: The Case of Pacific Islanders.

PubMed

Xiao, Hong; Smith-Prince, Jaynina

2015-01-01

A number of factors influence the disclosure of child sexual abuse by survivors. While the influence of race and ethnicity on disclosure patterns is getting more attention, little has been written on abused children of Pacific Islanders, due in part to both lack of relevant data and a relatively small Pacific Islander population in the United States. Drawing on interviews with Pacific Islander women who were sexually abused in childhood and who delayed revealing their victimization, we explore the reasons for delayed disclosure. Findings suggest that cultural norms and family dynamics affect disclosure decisions. Concerns for the family and self-blame were the most common reasons for delay and lack of disclosure. We discuss implications of the findings and make policy recommendations.

Managing ulcerative colitis by increasing hydrogen production via oral administration of Acarbose.

PubMed

Zhu, Jian-Hong; Zhang, De-Qing; Chen, Wei-Chang

2013-01-01

The objective of the study was to investigate ulcerative colitis management through oral administration of acarbose. Acarbose has gained importance as a drug used widely to treat Diabetes Mellitus Type 2,as it acts on the small intestine by competitively inhibiting enzymes that delay the release of glucose from complex carbohydrates, thereby specifically reducing postprandial glucose excursion. The main side-effect of treatment with Acarbose, flatulence, occurs when undigested carbohydrates are fermented by colonic bacteria, resulting in considerable amounts of hydrogen. We found that the enteric benefits of Acarbose are partly due to be their ability to neutralise oxidative stress via increased production of H₂ in the gastrointestinal tract. Therefore, some symptoms of ulcerative colitis in human beings can be ameliorated by Acarbose.

Forced oscillations of cracked beam under the stochastic cyclic loading

NASA Astrophysics Data System (ADS)

Matsko, I.; Javors'kyj, I.; Yuzefovych, R.; Zakrzewski, Z.

2018-05-01

An analysis of forced oscillations of cracked beam using statistical methods for periodically correlated random processes is presented. The oscillation realizations are obtained on the basis of numerical solutions of differential equations of the second order, for the case when applied force is described by a sum of harmonic and stationary random process. It is established that due to crack appearance forced oscillations acquire properties of second-order periodical non-stationarity. It is shown that in a super-resonance regime covariance and spectral characteristics, which describe non-stationary structure of forced oscillations, are more sensitive to crack growth than the characteristics of the oscillation's deterministic part. Using diagnostic indicators formed on their basis allows the detection of small cracks.

Emery-Kivelson solution of the two-channel Kondo problem

NASA Astrophysics Data System (ADS)

Sengupta, Anirvan M.; Georges, Antoine

1994-04-01

We consider the two-channel Kondo model in the Emery-Kivelson approach, and calculate the total susceptibility enhancement due to the impurity χimp=χ-χbulk. We find that χimp exactly vanishes at the solvable point, in a completely analogous way to the singular part of the specific heat Cimp. A perturbative calculation around the solvable point yields the generic behavior χimp~log(1/T), Cimp~T logT and the known universal value of the Wilson ratio RW=8/3. From this calculation, the Kondo temperature can be identified and is found to behave as the inverse square of the perturbation parameter. The small-field, zero-temperature behavior χimp~log(1/h) is also recovered.

Ocean Salinity Variance and the Global Water Cycle.

NASA Astrophysics Data System (ADS)

Schmitt, R. W.

2012-12-01

Ocean salinity variance is increasing and appears to be an indicator of rapid change in the global water cycle. While the small terrestrial water cycle does not reveal distinct trends, in part due to strong manipulation by civilization, the much larger oceanic water cycle seems to have an excellent proxy for its intensity in the contrasts in sea surface salinity (SSS). Change in the water cycle is arguably the most important challenge facing mankind. But how well do we understand the oceanic response? Does the ocean amplify SSS change to make it a hyper-sensitive indicator of change in the global water cycle? An overview of the research challenges to the oceanographic community for understanding the dominant component of the global water cycle is provided.

EIT and the Popular Imagination

NASA Technical Reports Server (NTRS)

Gurman, J. B.

2005-01-01

The Extreme ultraviolet Imaging Telescope on board SOHO, designed and built by Principal Investigator Jean-Pierre Delaboudiniere and his French/Belgan/US team, has produced numerous scientific breakthroughs, and has become both the standard coronal finder telescope and the determinant of whether halo coronal mass ejections are earthward-directed. Due to the dramatic nature of the images produced by EIT over the last nearly ten years, those images have been adopted worldwide in a manner no one could have foreseen before the launch of SOHO. I examine a small sample of the many scientific, commercial, and cultural uses of EIT imagery from the last decade in order to demonstrate how well-visualized, scientific imagery can first penetrate and then become an accepted part of the popular imagination.

Conflict Prevention and Separation Assurance Method in the Small Aircraft Transportation System

NASA Technical Reports Server (NTRS)

Consiglio, Maria C.; Carreno, Victor A.; Williams, Daniel M.; Munoz, Cesar

2005-01-01

A multilayer approach to the prevention of conflicts due to the loss of aircraft-to-aircraft separation which relies on procedures and on-board automation was implemented as part of the SATS HVO Concept of Operations. The multilayer system gives pilots support and guidance during the execution of normal operations and advance warning for procedure deviations or off-nominal operations. This paper describes the major concept elements of this multilayer approach to separation assurance and conflict prevention and provides the rationale for its design. All the algorithms and functionality described in this paper have been implemented in an aircraft simulation in the NASA Langley Research Center s Air Traffic Operation Lab and on the NASA Cirrus SR22 research aircraft.

ADVANCES IN DISCOVERING SMALL MOLECULES TO PROBE PROTEIN FUNCTION IN A SYSTEMS CONTEXT

PubMed Central

Doyle, Shelby K; Pop, Marius S; Evans, Helen L; Koehler, Angela N

2015-01-01

High throughput screening has historically been used for drug discovery almost exclusively by the pharmaceutical industry. Due to a significant decrease in costs associated with establishing a high throughput facility and an exponential interest in discovering probes of development and disease associated biomolecules, HTS core facilities have become an integral part of most academic and non-profit research institutions over the past decade. This major shift has led to the development of new HTS methodologies extending beyond the capabilities and target classes used in classical drug discovery approaches such as traditional enzymatic activity-based screens. In this brief review we describe some of the most interesting developments in HTS technologies and methods for chemical probe discovery. PMID:26615565

Experimental investigation of piercing of high-strength steels within a critical range of slant angle

NASA Astrophysics Data System (ADS)

Senn, S.; Liewald, M.

2017-09-01

Deep drawn parts often do have complex designs and, therefore, must be trimmed or punched subsequently in a second stage. Due to the complex part geometry, most punching areas do reveal critical slant angle (angle between part surface and ram movement direction) different to perpendicular direction. Piercing within a critical range of slant angle may lead to severe damage of the cutting tool. Consequently, expensive cam units are required to transform the ram moving direction in order to perform the piercing process perpendicularly to the local part surface. For modern sheet metals, however, the described critical angle of attack has not been investigated adequately until now. Therefore, cam units are used in cases in which regular piercing with high slant angle wouldn’t be possible. Purpose of this study is to investigate influencing factors and their effect on punch damage during piercing of high strength steels with slant angles. Therefore, a modular shearing tool was designed, which allows to simply switch die parts to vary cutting clearance and cutting angle. The target size of the study is to measure the lateral deviation of the punch which is monitored by an eddy current sensor. The sensor is located in the downholder and measures the lateral punch deviation in-line during manufacturing. The deviation is mainly influenced by slant angle of workpiece surface. In relation to slang angle and sheet thickness the clearance has a small influence on the measured punch deflection.

Obstructive Bezoars of the Small Bowel Treated with Coca-Cola Zero through a Long Intestinal Tube and Endoscopic Manipulation.

PubMed

Endo, Kei; Kakisaka, Keisuke; Suzuki, Yuji; Matsumoto, Takayuki; Takikawa, Yasuhiro

2017-11-15

An 82-year-old Japanese man visited our hospital with abdominal fullness accompanied by lower abdominal pain. He presented with small bowel obstruction due to multiple diospyrobezoars. The bezoars were successfully removed without any surgical intervention by the administration of Coca-Cola Zero through a long intestinal tube and subsequent endoscopic manipulation. Such a combination may be the treatment of choice for small bowel obstruction due to bezoars.

Small City Transit Characteristics : an Overview

DOT National Transportation Integrated Search

1976-03-01

The report is based on information and operating data from thirteen small community transit systems which were studied as part of a larger project on small community transit and its potential. It summarizes organizational, institutional, and operatio...

Development of a Methodology to Conduct Usability Evaluation for Hand Tools that May Reduce the Amount of Small Parts that are Dropped During Installation while Processing Space Flight Hardware

NASA Technical Reports Server (NTRS)

Miller, Darcy

2000-01-01

Foreign object debris (FOD) is an important concern while processing space flight hardware. FOD can be defined as "The debris that is left in or around flight hardware, where it could cause damage to that flight hardware," (United Space Alliance, 2000). Just one small screw left unintentionally in the wrong place could delay a launch schedule while it is retrieved, increase the cost of processing, or cause a potentially fatal accident. At this time, there is not a single solution to help reduce the number of dropped parts such as screws, bolts, nuts, and washers during installation. Most of the effort is currently focused on training employees and on capturing the parts once they are dropped. Advances in ergonomics and hand tool design suggest that a solution may be possible, in the form of specialty hand tools, which secure the small parts while they are being handled. To assist in the development of these new advances, a test methodology was developed to conduct a usability evaluation of hand tools, while performing tasks with risk of creating FOD. The methodology also includes hardware in the form of a testing board and the small parts that can be installed onto the board during a test. The usability of new hand tools was determined based on efficiency and the number of dropped parts. To validate the methodology, participants were tested while performing a task that is representative of the type of work that may be done when processing space flight hardware. Test participants installed small parts using their hands and two commercially available tools. The participants were from three groups: (1) students, (2) engineers / managers and (3) technicians. The test was conducted to evaluate the differences in performance when using the three installation methods, as well as the difference in performance of the three participant groups.

Genetics Home Reference: COL4A1-related brain small-vessel disease

MedlinePlus

... COL4A1-related brain small-vessel disease COL4A1-related brain small-vessel disease Printable PDF Open All Close ... view the expand/collapse boxes. Description COL4A1 -related brain small-vessel disease is part of a group ...

Nondimensional parameter for conformal grinding: combining machine and process parameters

NASA Astrophysics Data System (ADS)

Funkenbusch, Paul D.; Takahashi, Toshio; Gracewski, Sheryl M.; Ruckman, Jeffrey L.

1999-11-01

Conformal grinding of optical materials with CNC (Computer Numerical Control) machining equipment can be used to achieve precise control over complex part configurations. However complications can arise due to the need to fabricate complex geometrical shapes at reasonable production rates. For example high machine stiffness is essential, but the need to grind 'inside' small or highly concave surfaces may require use of tooling with less than ideal stiffness characteristics. If grinding generates loads sufficient for significant tool deflection, the programmed removal depth will not be achieved. Moreover since grinding load is a function of the volumetric removal rate the amount of load deflection can vary with location on the part, potentially producing complex figure errors. In addition to machine/tool stiffness and removal rate, load generation is a function of the process parameters. For example by reducing the feed rate of the tool into the part, both the load and resultant deflection/removal error can be decreased. However this must be balanced against the need for part through put. In this paper a simple model which permits combination of machine stiffness and process parameters into a single non-dimensional parameter is adapted for a conformal grinding geometry. Errors in removal can be minimized by maintaining this parameter above a critical value. Moreover, since the value of this parameter depends on the local part geometry, it can be used to optimize process settings during grinding. For example it may be used to guide adjustment of the feed rate as a function of location on the part to eliminate figure errors while minimizing the total grinding time required.

Small Bowel Obstruction Due to Mochi (Rice Cake): A Case Report and Review of the Literature.

PubMed

Park, Daeho; Inoue, Kazuoki; Hamada, Toshihiro; Taniguchi, Shin-Ichi; Sato, Naoki; Koda, Masahiko

2018-03-01

A 66-year-old man presented at our emergency department with severe intermittent abdominal pain. His history revealed that he had eaten several mochi (rice cakes) without sufficiently chewing them before swallowing. Following computed tomography that showed a high value, he was diagnosed with an obstruction caused by mochi. Although mochi obstruction can sometimes improve with conservative treatment, this case required laparotomy. Medical literature in English on small bowel obstruction due to mochi is rare, but fortunately in this case we were able to collect complete laboratory and imaging data. Furthermore, due to the surgical findings, we could clearly diagnose the pathophysiology of mochi obstruction. Here we describe a case of small bowel obstruction due to mochi, and review the literature to determine the characteristics of intestinal obstruction caused by it.

16 CFR 1020.2 - What is the definition of “small business”?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false What is the definition of âsmall businessâ? 1020.2 Section 1020.2 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL SMALL BUSINESS § 1020.2 What is the definition of “small business”? As used in this part, the term small business means...

76 FR 18375 - Small Business Jobs Act: Eligible Loans for 504 Loan Program Debt Refinancing

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-04

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 120 Small Business Jobs Act: Eligible Loans for 504 Loan... for debt refinancing under the Small Business Jobs Act. DATES: Effective Date: This document is... refinancing program authorized by the Small Business Jobs Act (Jobs Act), Public Law 111-240, 124 Stat. 2504...

Phase 1 study of inotuzumab ozogamicin combined with R-GDP for the treatment of patients with relapsed/refractory CD22+ B-cell non-Hodgkin lymphoma.

PubMed

Sangha, Randeep; Davies, Andrew; Dang, Nam H; Ogura, Michinori; MacDonald, David A; Ananthakrishnan, Revathi; Paccagnella, M Luisa; Vandendries, Erik; Boni, Joseph; Goh, Yeow Tee

2017-01-01

Objective : To evaluate safety, tolerability, and preliminary activity of inotuzumab ozogamicin (InO) plus rituximab, gemcitabine, dexamethasone, and cisplatin (R-GDP) in patients with relapsed/refractory CD22+ B-cell non-Hodgkin lymphoma (NHL). Methods : Patients received InO plus R-GDP (21-day cycle; six-cycle maximum) using up-and-down dose-escalation schema for gemcitabine and cisplatin to define the highest dosage regimen(s) with acceptable toxicity (Part 1; n  = 27). Part 2 ( n  = 10) confirmed safety and tolerability; Part 3 ( n  = 18) evaluated preliminary efficacy. Results: Among 55 patients enrolled, 42% were refractory at baseline (median 2 [range, 1-6] prior therapies); 38% had diffuse large B-cell lymphoma (DLBCL). The highest dosage regimen with acceptable toxicity was InO 0.8 mg/m 2 , rituximab 375 mg/m 2 , cisplatin 50 mg/m 2 , gemcitabine 500 mg/m 2 (day 1 only) and dexamethasone 40 mg (days 1-4); this was confirmed in Part 2, in which three patients had dose-limiting toxicities (grade 4 thrombocytopenia [ n  = 2], febrile neutropenia [ n  = 2]). Most frequent treatment-related adverse events were thrombocytopenia (any grade, 85%; grade ≥3, 75%) and neutropenia (69%; 62%). Overall (objective) response rate (ORR) was 53% (11 complete, 18 partial responses); ORR was 71%, 33%, and 62% in patients with follicular lymphoma ( n  = 14), DLBCL ( n  = 21), and mantle cell lymphoma ( n  = 13), respectively. Conclusions: InO 0.8 mg/m 2 plus R-GDP was associated with manageable toxicity, although gemcitabine and cisplatin doses were lower than in the standard R-GDP regimen due to hematologic toxicity. Evidence of antitumor activity was observed; however, these exploratory data should be interpreted with caution due to the small sample size and short follow-up duration (Clinicaltrials.gov number: NCT01055496).

How Amino Acids and Peptides Shaped the RNA World

PubMed Central

van der Gulik, Peter T.S.; Speijer, Dave

2015-01-01

The “RNA world” hypothesis is seen as one of the main contenders for a viable theory on the origin of life. Relatively small RNAs have catalytic power, RNA is everywhere in present-day life, the ribosome is seen as a ribozyme, and rRNA and tRNA are crucial for modern protein synthesis. However, this view is incomplete at best. The modern protein-RNA ribosome most probably is not a distorted form of a “pure RNA ribosome” evolution started out with. Though the oldest center of the ribosome seems “RNA only”, we cannot conclude from this that it ever functioned in an environment without amino acids and/or peptides. Very small RNAs (versatile and stable due to basepairing) and amino acids, as well as dipeptides, coevolved. Remember, it is the amino group of aminoacylated tRNA that attacks peptidyl-tRNA, destroying the bond between peptide and tRNA. This activity of the amino acid part of aminoacyl-tRNA illustrates the centrality of amino acids in life. With the rise of the “RNA world” view of early life, the pendulum seems to have swung too much towards the ribozymatic part of early biochemistry. The necessary presence and activity of amino acids and peptides is in need of highlighting. In this article, we try to bring the role of the peptide component of early life back into focus. We argue that an RNA world completely independent of amino acids never existed. PMID:25607813

Impact of higher order diagrams on phase equilibrium calculations for small molecules using lattice cluster theory

NASA Astrophysics Data System (ADS)

Zimmermann, Patrick; Walowski, Christoph; Enders, Sabine

2018-03-01

The Lattice Cluster Theory (LCT) provides a powerful tool to predict thermodynamic properties of large molecules (e.g., polymers) of different molecular architectures. When the pure-component parameters of a certain compound have been derived by adjustment to experimental data and the number of atoms is held constant within the molecule so that only the architecture is changed, the LCT is capable of predicting the properties of isomers without further parameter adjustment just based on the incorporation of molecular architecture. Trying to predict the thermodynamic properties of smaller molecules, one might face some challenges, which are addressed in this contribution. After factoring out the mean field term of the partition function, the LCT poses an expression that involves corrections to the mean field depending on molecular architecture, resulting in the free energy formally being expressed as a double series expansion in lattice coordination number z and interaction energy ɛ ˜ . In the process of deriving all contributing sub-structures within a molecule, some parts have been neglected to this point due to the double series expansion being truncated after the order ɛ˜ 2z-2. We consider the neglected parts that are of the order z-3 and reformulate the expression for the free energy within the LCT to achieve a higher predictive capability of the theory when it comes to small isomers and compressible systems. The modified version was successfully applied for phase equilibrium calculations of binary mixtures composed of linear and branched alkanes.

Nervous branch passing through an accessory canal in the sphenozygomatic suture: the temporal branch of the zygomatic nerve.

PubMed

Akita, K; Shimokawa, T; Tsunoda, A; Sato, T

2002-05-01

A nervous branch which passes through a small canal in the sphenozygomatic suture is sometimes observed during dissection. To examine the origin, course and distribution of this nervous branch, 42 head halves of 21 Japanese cadavers (11 males, 10 females) and 142 head halves of 71 human dry skulls were used. The branch was observed in seven sides (16.7%); it originated from the communication between the lacrimal nerve and the zygomaticotemporal branch of the zygomatic nerve or from the trunk of the zygomatic nerve. In two head halves (4.8%), the branch pierced the anterior part of the temporalis muscle during its course to the skin of the anterior part of the temple. The small canal in the suture was observed in 31 head halves (21.8%) of the dry skulls. Although this nervous branch is inconstantly observed, it should be called the temporal branch of the zygomatic nerve according to the constant positional relationship to the sphenoid and zygomatic bones. According to its origin, course and distribution, this nervous branch may be considered to be influential in zygomatic and retro-orbital pain due to entrapment and tension from the temporalis muscle and/or the narrow bony canal. The French version of this article is available in the form of electronic supplementary material and can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00276-002-0027-4.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeng, Zhicheng; Chen, Bin; Goode, Philip R.

Jets are ubiquitously present in both quiet and active regions on the Sun. They are widely believed to be driven by magnetic reconnection. A fan-spine structure has been frequently reported in some coronal jets and flares, and has been regarded as a signature of ongoing magnetic reconnection in a topology consisting of a magnetic null connected by a fan-like separatrix surface and a spine. However, for small-scale chromospheric jets, clear evidence of such structures is rather rare, although it has been implied in earlier works that showed an inverted-Y-shaped feature. Here we report high-resolution (0.″16) observations of a small-scale chromosphericmore » jet obtained by the New Solar Telescope (NST) using 10830 Å filtergrams. Bi-directional flows were observed across the separatrix regions in the 10830 Å images, suggesting that the jet was produced due to magnetic reconnection. At the base of the jet, a fan-spine structure was clearly resolved by the NST, including the spine and the fan-like surface, as well as the loops before and after the reconnection. A major part of this fan-spine structure, with the exception of its bright footpoints and part of the base arc, was invisible in the extreme ultraviolet and soft X-ray images (observed by the Atmosphere Imaging Assembly and the X-Ray Telescope, respectively), indicating that the reconnection occurred in the upper chromosphere. Our observations suggest that the evolution of this chromospheric jet is consistent with a two-step reconnection scenario proposed by Török et al.« less

LXR-dependent regulation of macrophage-specific reverse cholesterol transport is impaired in a model of genetic diabesity.

PubMed

Errico, Teresa L; Méndez-Lara, Karen Alejandra; Santos, David; Cabrerizo, Núria; Baila-Rueda, Lucía; Metso, Jari; Cenarro, Ana; Pardina, Eva; Lecube, Albert; Jauhiainen, Matti; Peinado-Onsurbe, Julia; Escolà-Gil, Joan Carles; Blanco-Vaca, Francisco; Julve, Josep

2017-08-01

Diabesity and fatty liver have been associated with low levels of high-density lipoprotein cholesterol, and thus could impair macrophage-specific reverse cholesterol transport (m-RCT). Liver X receptor (LXR) plays a critical role in m-RCT. Abcg5/g8 sterol transporters, which are involved in cholesterol trafficking into bile, as well as other LXR targets, could be compromised in the livers of obese individuals. We aimed to determine m-RCT dynamics in a mouse model of diabesity, the db/db mice. These obese mice displayed a significant retention of macrophage-derived cholesterol in the liver and reduced fecal cholesterol elimination compared with nonobese mice. This was associated with a significant downregulation of the hepatic LXR targets, including Abcg5/g8. Pharmacologic induction of LXR promoted the delivery of total tracer output into feces in db/db mice, partly due to increased liver and small intestine Abcg5/Abcg8 gene expression. Notably, a favorable upregulation of the hepatic levels of ABCG5/G8 and NR1H3 was also observed postoperatively in morbidly obese patients, suggesting a similar LXR impairment in these patients. In conclusion, our data show that downregulation of the LXR axis impairs cholesterol transfer from macrophages to feces in db/db mice, whereas the induction of the LXR axis partly restores impaired m-RCT by elevating the liver and small intestine expressions of Abcg5/g8. Copyright © 2017 Elsevier Inc. All rights reserved.

Multi-site evaluation of a computer aided detection (CAD) algorithm for small acute intra-cranial hemorrhage and development of a stand-alone CAD system ready for deployment in a clinical environment

NASA Astrophysics Data System (ADS)

Deshpande, Ruchi R.; Fernandez, James; Lee, Joon K.; Chan, Tao; Liu, Brent J.; Huang, H. K.

2010-03-01

Timely detection of Acute Intra-cranial Hemorrhage (AIH) in an emergency environment is essential for the triage of patients suffering from Traumatic Brain Injury. Moreover, the small size of lesions and lack of experience on the reader's part could lead to difficulties in the detection of AIH. A CT based CAD algorithm for the detection of AIH has been developed in order to improve upon the current standard of identification and treatment of AIH. A retrospective analysis of the algorithm has already been carried out with 135 AIH CT studies with 135 matched normal head CT studies from the Los Angeles County General Hospital/ University of Southern California Hospital System (LAC/USC). In the next step, AIH studies have been collected from Walter Reed Army Medical Center, and are currently being processed using the AIH CAD system as part of implementing a multi-site assessment and evaluation of the performance of the algorithm. The sensitivity and specificity numbers from the Walter Reed study will be compared with the numbers from the LAC/USC study to determine if there are differences in the presentation and detection due to the difference in the nature of trauma between the two sites. Simultaneously, a stand-alone system with a user friendly GUI has been developed to facilitate implementation in a clinical setting.

Rapid and slow: Varying magma ascent rates as a mechanism for Vulcanian explosions

NASA Astrophysics Data System (ADS)

Cassidy, Mike; Cole, Paul. D.; Hicks, Kelby E.; Varley, Nick R.; Peters, Nial; Lerner, Allan H.

2015-06-01

Vulcanian explosions are one of the most common types of volcanic activity observed at silicic volcanoes. Magma ascent rates are often invoked as being the fundamental control on their explosivity, yet this factor is poorly constrained for low magnitude end-member Vulcanian explosions, which are particularly poorly understood, partly due to the rarity of ash samples and low gas fluxes. We describe ash generated by small Vulcanian explosions at Volcán de Colima in 2013, where we document for the first time marked differences in the vesicularity, crystal characteristics (volume fraction, size and shape) and glass compositions in juvenile material from discrete events. We interpret these variations as representing differing ascent styles and speeds of magma pulses within the conduit. Heterogeneous degassing during ascent leads to fast ascending, gas-rich magma pulses together with slow ascending gas-poor magma pulses within the same conduit. This inferred heterogeneity is complemented by SO2 flux data, which show transient episodes of both open and closed system degassing, indicating efficient shallow fracture sealing mechanisms, which allows for gas overpressure to generate small Vulcanian explosions.

Effect of Compressive Stresses on Leakage Currents in Microchip Tantalum Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander

2012-01-01

Microchip tantalum capacitors are manufactured using new technologies that allow for production of small size capacitors (down to EIA case size 0402) with volumetric efficiency much greater than for regular chip capacitors. Due to a small size of the parts and leadless design they might be more sensitive to mechanical stresses that develop after soldering onto printed wiring boards (PWB) compared to standard chip capacitors. In this work, the effect of compressive stresses on leakage currents in capacitors has been investigated in the range of stresses up to 200 MPa. Significant, up to three orders of magnitude, variations of currents were observed after the stress exceeds a certain critical level that varied from 10 MPa to 180 MPa for capacitors used in this study. A stress-induced generation of electron traps in tantalum pentoxide dielectric is suggested to explain reversible variations of leakage currents in tantalum capacitors. Thermo-mechanical characteristics of microchip capacitors have been studied to estimate the level of stresses caused by assembly onto PWB and assess the risk of stress-related degradation and failures. Keywords: tantalum capacitors, leakage current, soldering, reliability, mechanical stress.

Comparisons and Selections of Features and Classifiers for Short Text Classification

NASA Astrophysics Data System (ADS)

Wang, Ye; Zhou, Zhi; Jin, Shan; Liu, Debin; Lu, Mi

2017-10-01

Short text is considerably different from traditional long text documents due to its shortness and conciseness, which somehow hinders the applications of conventional machine learning and data mining algorithms in short text classification. According to traditional artificial intelligence methods, we divide short text classification into three steps, namely preprocessing, feature selection and classifier comparison. In this paper, we have illustrated step-by-step how we approach our goals. Specifically, in feature selection, we compared the performance and robustness of the four methods of one-hot encoding, tf-idf weighting, word2vec and paragraph2vec, and in the classification part, we deliberately chose and compared Naive Bayes, Logistic Regression, Support Vector Machine, K-nearest Neighbor and Decision Tree as our classifiers. Then, we compared and analysed the classifiers horizontally with each other and vertically with feature selections. Regarding the datasets, we crawled more than 400,000 short text files from Shanghai and Shenzhen Stock Exchanges and manually labeled them into two classes, the big and the small. There are eight labels in the big class, and 59 labels in the small class.

Solid-State Thermionic Nuclear Power for Megawatt Propulsion, Planetary Surface and Commercial Power Project

NASA Technical Reports Server (NTRS)

George, Jeffrey

2014-01-01

Thermionic (TI) power conversion is a promising technology first investigated for power conversion in the 1960's, and of renewed interest due to modern advances in nanotechnology, MEMS, materials and manufacturing. Benefits include high conversion efficiency (20%), static operation with no moving parts and potential for high reliability, greatly reduced plant complexity, and the potential for reduced development costs. Thermionic emission, credited to Edison in 1880, forms the basis of vacuum tubes and much of 20th century electronics. Heat can be converted into electricity when electrons emitted from a hot surface are collected across a small gap. For example, two "small" (6 kWe) Thermionic Space Reactors were flown by the USSR in 1987-88 for ocean radar reconnaissance. Higher powered Nuclear-Thermionic power systems driving Electric Propulsion (Q-thruster, VASIMR, etc.) may offer the breakthrough necessary for human Mars missions of < 1 yr round trip. Power generation on Earth could benefit from simpler, moe economical nuclear plants, and "topping" of more fuel and emission efficient fossil-fuel plants.

Retrospective reports of parental physical affection and parenting style: a study of Finnish twins.

PubMed

Harlaar, Nicole; Santtila, Pekka; Björklund, Johanna; Alanko, Katarina; Jern, Patrick; Varjonen, Markus; von der Pahlen, Bettina; Sandnabba, Kenneth

2008-08-01

Individual differences in parenting behaviors are due, in part, to genetic factors. In the present study, the authors sought to determine whether the degree of genetic influence varied according to the type of parental behavior under consideration. A population-based sample of 2,334 pairs of Finnish twins provided ratings on the physical affection, control, abusiveness, and indifference shown by their father and mother during childhood. Genetic influences, shared environmental influences, and nonshared environmental influences accounted for a small-to-medium proportion (17%-30%), a small-to-large proportion (22%-44%), and a medium-to-large proportion (37%-55%) of the variance in each parenting measure, respectively. There were no significant differences in effect sizes for mothers and fathers or across the 4 types of parental behavior. The genetic results may reflect characteristic styles with which parents respond to genetically influenced behaviors of individuals (gene-environment correlations) or individual perceptions of this relationship (gene-person correlation processes). The findings have implications for intervention and prevention work with families and for interpretation of evidence for interactions between genes and parenting behaviors.

Primary small intestine tumour as the cause of gastrointestinal tract occlusion.

PubMed

Fabiszewski, Arkadiusz; Brycht, Łukasz; Jackowski, Marek

2011-03-01

The following paper presents the case of a 40-year-old patient staying in our Clinic between 2 March 2010 and 12 March 2010 due to the symptoms of permeable occlusion of gastrointestinal tract. This is a patient with a several weeks' history of non-specific abdominal pain, vomiting and significant weight loss (ca 20 kg). Until recently he has not suffered from any serious illnesses. In the performed abdominal ultrasound, gastroscopy and colonoscopy no pathology was affirmed. CT scan with intravenous and oral contrast showed significantly widened intestinal loops with residual liquid matter in the stomach, duodenum and a part of the jejunum without any distinguishing pathological mass, and also single mesenteric lymph nodes and para-aortic nodes enlarged to the size of 12 mm. The patient was qualified for laparatomy. During the surgery, a 4-cm tumour of the jejunum, concentrically narrowing intestinal lumen was found. Segmental resection of the small intestine was performed with side to side anastomosis with the use of a linear stapler. Currently the general condition of the patient is good, without any ailments, and the patient is undergoing systemic treatment.

Experimental Investigation and Modeling of Scale Effects in Micro Jet Pumps

NASA Astrophysics Data System (ADS)

Gardner, William Geoffrey

2011-12-01

Since the mid-1990s there has been an active effort to develop hydrocarbon-fueled power generation and propulsion systems on the scale of centimeters or smaller. This effort led to the creation and expansion of a field of research focused around the design and reduction to practice of Power MEMS (microelectromechanical systems) devices, beginning first with microscale jet engines and a generation later more broadly encompassing MEMS devices which generate power or pump heat. Due to small device scale and fabrication techniques, design constraints are highly coupled and conventional solutions for device requirements may not be practicable. This thesis describes the experimental investigation, modeling and potential applications for two classes of microscale jet pumps: jet ejectors and jet injectors. These components pump fluids with no moving parts and can be integrated into Power MEMS devices to satisfy pumping requirements by supplementing or replacing existing solutions. This thesis presents models developed from first principles which predict losses experienced at small length scales and agree well with experimental results. The models further predict maximum achievable power densities at the onset of detrimental viscous losses.

Thermoelastic stress in oceanic lithosphere due to hotspot reheating

NASA Technical Reports Server (NTRS)

Zhu, Anning; Wiens, Douglas A.

1991-01-01

The effect of hotspot reheating on the intraplate stress field is investigated by modeling the three-dimensional thermal stress field produced by nonuniform temperature changes in an elastic plate. Temperature perturbations are calculated assuming that the lithosphere is heated by a source in the lower part of the thermal lithosphere. A thermal stress model for the elastic lithosphere is calculated by superposing the stress fields resulting from temperature changes in small individual elements. The stress in an elastic plate resulting from a temperature change in each small element is expressed as an infinite series, wherein each term is a source or an image modified from a closed-from half-space solution. The thermal stress solution is applied to midplate swells in oceanic lithosphere with various thermal structures and plate velocities. The results predict a stress field with a maximum deviatoric stress on the order of 100 MPa covering a broad area around the hotspot plume. The predicted principal stress orientations show a complicated geographical pattern, with horizontal extension perpendicular to the hotspot track at shallow depths and compression along the track near the bottom of the elastic lithosphere.

Multi-body modeling method for rollover using MADYMO

NASA Astrophysics Data System (ADS)

Liu, Changye; Lin, Zhigui; Lv, Juncheng; Luo, Qinyue; Qin, Zhenyao; Zhang, Pu; Chen, Tao

2017-04-01

Rollovers are complex road accidents causing a big deal of fatalities. FE model for rollover study will costtoo much time due to its long duration.A new multi-body modeling method is proposed in this paper which can save a lot of time and has high-fidelity meanwhile. Following works were carried out to validate this new method. First, a small van was tested following the FMVSS 208 protocol for the validation of the proposed modeling method. Second, a MADYMO model of this small van was reconstructed. The vehicle body was divided into two main parts, the deformable upper body and the rigid lower body, modeled by different waysbased on an FE model. The specific method of modeling is offered in this paper. Finally, the trajectories of the vehicle from test and simulation were comparedand the match was very good. Acceleration of left B pillar was taken into consideration, which turned out fitting the test result well in the time of event. The final deformation status of the vehicle in test and simulation showed similar trend. This validated model provides a reliable wayfor further research in occupant injuries during rollovers.

Assessment of simulated aerosol effective radiative forcings in the terrestrial spectrum

NASA Astrophysics Data System (ADS)

Heyn, Irene; Block, Karoline; Mülmenstädt, Johannes; Gryspeerdt, Edward; Kühne, Philipp; Salzmann, Marc; Quaas, Johannes

2017-01-01

In its fifth assessment report (AR5), the Intergovernmental Panel on Climate Change provides a best estimate of the effective radiative forcing (ERF) due to anthropogenic aerosol at -0.9 W m-2. This value is considerably weaker than the estimate of -1.2 W m-2 in AR4. A part of the difference can be explained by an offset of +0.2 W m-2 which AR5 added to all published estimates that only considered the solar spectrum, in order to account for adjustments in the terrestrial spectrum. We find that, in the CMIP5 multimodel median, the ERF in the terrestrial spectrum is small, unless microphysical effects on ice- and mixed-phase clouds are parameterized. In the latter case it is large but accompanied by a very strong ERF in the solar spectrum. The total adjustments can be separated into microphysical adjustments (aerosol "effects") and thermodynamic adjustments. Using a kernel technique, we quantify the latter and find that the rapid thermodynamic adjustments of water vapor and temperature profiles are small. Observation-based constraints on these model results are urgently needed.

Cavity detection and delineation research. Part 4: Microgravimetric survey: Manatee Springs Site, Florida

NASA Astrophysics Data System (ADS)

Butler, D. K.; Whitten, C. B.; Smith, F. L.

1983-03-01

Results of a microgravimetric survey at Manatee Springs, Levy County, Fla., are presented. The survey area was 100 by 400 ft, with 20-ft gravity station spacing, and with the long dimension of the area approximately perpendicular to the known trend of the main cavity. The main cavity is about 80 to 100 ft below the surface and has a cross section about 16 to 20 ft in height and 30 to 40 ft in width beneath the survey area. Using a density contrast of -1.3 g/cucm, the gravity anomaly is calculated to be -35 micro Gal with a width at half maximum of 205 ft. The microgravimetric survey results clearly indicate a broad negative anomaly coincident with the location and trend of the cavity system across the survey area. The anomaly magnitude and width are consistent with those calculated from the known depth and dimensions of the main cavity. In addition, a small, closed negative anomaly feature, superimposed on the broad negative feature due to the main cavity, satisfactorily delineated a small secondary cavity feature which was discovered and mapped by cave divers.

EVALUATION OF GDOT'S SMALL BUSINESS PROGRAM

DOT National Transportation Integrated Search

2015-09-01

Federal Regulation 49 CFR Part 26 requires the Georgia Department of Transportation (GDOT) to implement a Small Business Program. The Program must be available to all firms that meet the U.S. Small Business Administration's (SBA) size standard, which...

Teaching Small Business Management in the UK Part I.

ERIC Educational Resources Information Center

Birley, Sue; Gibb, Allan

1984-01-01

Reviews the key factors influencing small business management education in the United Kingdom, particularly government policies encouraging small business development. Postulates a model based on the career cycle and considers training opportunities for various stages. (SK)

The Characteristics of Small-Business Employees.

ERIC Educational Resources Information Center

Headd, Brian

2000-01-01

Small businesses employ slightly more than half of the private sector work force. In many ways, such as education, race, origin, age, and part-time status, the small business work force differs from that of larger enterprises (Author)

48 CFR 215.203-70 - Requests for proposals-tiered evaluation of offers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY... shall be consistent with FAR part 19. (b) Consideration shall be given to the tiers of small businesses (e.g., 8(a), HUBZone small business, service-disabled veteran-owned small business, small business...

78 FR 36715 - VA Veteran-Owned Small Business (VOSB) Verification Guidelines; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-19

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 74 RIN 2900-AO63 VA Veteran-Owned Small Business (VOSB... Department of Veterans Affairs (VA) amended its Veteran-Owned Small Business (VOSB) Verification Guidelines... Office of Small and Disadvantaged Business Utilization (00SB), Department of Veterans Affairs, 810...

Learning Science in Small Multi-Age Groups: The Role of Age Composition

ERIC Educational Resources Information Center

Kallery, Maria; Loupidou, Thomais

2016-01-01

The present study examines how the overall cognitive achievements in science of the younger children in a class where the students work in small multi-age groups are influenced by the number of older children in the groups. The context of the study was early-years education. The study has two parts: The first part involved classes attended by…

Residual stand damage survey for three small tractors used in harvesting northern hardwoods

Treesearch

Neil K. Huyler; George D. Aiken; Chris B. LeDoux

1994-01-01

There have always been concerns about the impact of timber harvesting with conventional ground-based harvesting equipment on many parts of the forest ecosystem. One of these parts, which is easily measured, is the residual stand. The interest in small tractors (less than 60 horsepower) has increased in recent years because private landowners are concerned that large...

Industrial Education. Mini-Course Cluster: Bikes, Electricity, Small Engines. [Grade 9].

ERIC Educational Resources Information Center

Parma City School District, OH.

Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides three units to be used in a one semester course in grade 9 on the subjects of bikes, electricity, and small engines. The section on bicycles is divided into two parts, mechanical and power (i.e. motorcycles) and covers the topics of…

Small Business Management. Part II. A Suggested Adult Course Outline.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Continuing Education Curriculum Development.

This teacher's guide is a companion to "Small Business Management Part I" published by the New York State Education Department in 1968. The course outlined by the guide is primarily for those who aspire to own and operate their own business, and those in business who wish to improve their operations. The course consists of six lessons covering…

13 CFR 108.700 - Compliance with size standards in part 121 of this chapter as a condition of Assistance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Compliance with size standards in part 121 of this chapter as a condition of Assistance. 108.700 Section 108.700 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Financing of Small...

Obstructive Bezoars of the Small Bowel Treated with Coca-Cola Zero through a Long Intestinal Tube and Endoscopic Manipulation

PubMed Central

Endo, Kei; Kakisaka, Keisuke; Suzuki, Yuji; Matsumoto, Takayuki; Takikawa, Yasuhiro

2017-01-01

An 82-year-old Japanese man visited our hospital with abdominal fullness accompanied by lower abdominal pain. He presented with small bowel obstruction due to multiple diospyrobezoars. The bezoars were successfully removed without any surgical intervention by the administration of Coca-Cola Zero through a long intestinal tube and subsequent endoscopic manipulation. Such a combination may be the treatment of choice for small bowel obstruction due to bezoars. PMID:28943577

An Approach to Cluster EU Member States into Groups According to Pathways of Salmonella in the Farm-to-Consumption Chain for Pork Products.

PubMed

Vigre, Håkan; Domingues, Ana Rita Coutinho Calado; Pedersen, Ulrik Bo; Hald, Tine

2016-03-01

The aim of the project as the cluster analysis was to in part to develop a generic structured quantitative microbiological risk assessment (QMRA) model of human salmonellosis due to pork consumption in EU member states (MSs), and the objective of the cluster analysis was to group the EU MSs according to the relative contribution of different pathways of Salmonella in the farm-to-consumption chain of pork products. In the development of the model, by selecting a case study MS from each cluster the model was developed to represent different aspects of pig production, pork production, and consumption of pork products across EU states. The objective of the cluster analysis was to aggregate MSs into groups of countries with similar importance of different pathways of Salmonella in the farm-to-consumption chain using available, and where possible, universal register data related to the pork production and consumption in each country. Based on MS-specific information about distribution of (i) small and large farms, (ii) small and large slaughterhouses, (iii) amount of pork meat consumed, and (iv) amount of sausages consumed we used nonhierarchical and hierarchical cluster analysis to group the MSs. The cluster solutions were validated internally using statistic measures and externally by comparing the clustered MSs with an estimated human incidence of salmonellosis due to pork products in the MSs. Finally, each cluster was characterized qualitatively using the centroids of the clusters. © 2016 Society for Risk Analysis.

Multiple Streaming and the Probability Distribution of Density in Redshift Space

NASA Astrophysics Data System (ADS)

Hui, Lam; Kofman, Lev; Shandarin, Sergei F.

2000-07-01

We examine several aspects of redshift distortions by expressing the redshift-space density in terms of the eigenvalues and orientation of the local Lagrangian deformation tensor. We explore the importance of multiple streaming using the Zeldovich approximation (ZA), and compute the average number of streams in both real and redshift space. We find that multiple streaming can be significant in redshift space but negligible in real space, even at moderate values of the linear fluctuation amplitude (σl<~1). Moreover, unlike their real-space counterparts, redshift-space multiple streams can flow past each other with minimal interactions. Such nonlinear redshift-space effects, which are physically distinct from the fingers-of-God due to small-scale virialized motions, might in part explain the well-known departure of redshift distortions from the classic linear prediction by Kaiser, even at relatively large scales where the corresponding density field in real space is well described by linear perturbation theory. We also compute, using the ZA, the probability distribution function (PDF) of the density, as well as S3, in real and redshift space, and compare it with the PDF measured from N-body simulations. The role of caustics in defining the character of the high-density tail is examined. We find that (non-Lagrangian) smoothing, due to both finite resolution or discreteness and small-scale velocity dispersions, is very effective in erasing caustic structures, unless the initial power spectrum is sufficiently truncated.

Is the Reaction of C3N(-) with C2H2 a Possible Process for Chain Elongation in Titan's Ionosphere?

PubMed

Lindén, Fredrik; Alcaraz, Christian; Ascenzi, Daniela; Guillemin, Jean-Claude; Koch, Leopold; Lopes, Allan; Polášek, Miroslav; Romanzin, Claire; Žabka, Jan; Zymak, Illia; Geppert, Wolf D

2016-07-14

The reaction of C3N(-) with acetylene was studied using three different experimental setups, a triple quadrupole mass spectrometer (Trento), a tandem quadrupole mass spectrometer (Prague), and the "CERISES" guided ion beam apparatus at Orsay. The process is of astrophysical interest because it can function as a chain elongation mechanism to produce larger anions that have been detected in Titan's ionosphere by the Cassini Plasma Spectrometer. Three major products of primary processes, C2H(-), CN(-), and C5N(-), have been identified, whereby the production of the cyanide anion is probably partly due to collisional induced dissociation. The formations of all these products show considerable reaction thresholds and also display comparatively small cross sections. Also, no strong signals of anionic products for collision energies lower than 1 eV have been observed. Ab initio calculations have been performed to identify possible pathways leading to the observed products of the title reaction and to elucidate the thermodynamics of these processes. Although the productions of CN(-) and C5N(-) are exoergic, all reaction pathways have considerable barriers. Overall, the results of these computations are in agreement with the observed reaction thresholds. Due to the existence of considerable reaction energy barriers and the small observed cross sections, the title reaction is not very likely to play a major role in the buildup of large anions in cold environments like the interstellar medium or planetary and satellite ionospheres.

Cooperation between humans and robots in fine assembly

NASA Astrophysics Data System (ADS)

Jalba, C. K.; Konold, P.; Rapp, I.; Mann, C.; Muminovic, A.

2017-01-01

The development of ever smaller components in manufacturing processes require handling, assembling and testing of miniature similar components. The human eye meets its optical limits with ongoing miniaturization of parts, due to the fact that it is not able to detect particles with a size smaller than 0.11 mm or register distances below 0.07 mm - like separating gaps. After several hours of labour, workers cannot accurately differentiate colour nuances as well as constant quality of work cannot be guaranteed. Assembly is usually done with tools, such as microscopes, magnifiers or digital measuring devices. Due to the enormous mental concentration, quickly a fatigue process sets in. This requires breaks or change of task and reduces productivity. Dealing with handling devices such as grippers, guide units and actuators for component assembling, requires a time consuming training process. Often productivity increase is first achieved after years of daily training. Miniaturizations are ubiquitously needed, for instance in the surgery. Very small add-on instruments must be provided. In measurement, e.g. it is a technological must and a competitive advantage, to determine required data with a small-as-possible, highest-possible-resolution sensor. Solution: The realization of a flexible universal workstation, using standard robotic systems and image processing devices in cooperation with humans, where workers are largely freed up from highly strenuous physical and fine motoric work, so that they can do productive work monitoring and adjusting the machine assisted production process.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tatli, Emre; Ferroni, Paolo; Mazzoccoli, Jason

The possible use of compact heat exchangers (HXs) in sodium-cooled fast reactors (SFR) employing a Brayton cycle is promising due to their high power density and resulting small volume in comparison with conventional shell-and-tube HXs. However, the small diameter of their channels makes them more susceptible to plugging due to Na2O deposition during accident conditions. Although cold traps are designed to reduce oxygen impurity levels in the sodium coolant, their failure, in conjunction with accidental air ingress into the sodium boundary, could result in coolant oxygen levels that are above the saturation limit in the cooler parts of the HXmore » channels. This can result in Na2O crystallization and the formation of solid deposits on cooled channel surfaces, limiting or even blocking coolant flow. The development of analysis tools capable of modeling the formation of these deposits in the presence of sodium flow will allow designers of SFRs to properly size the HX channels so that, in the scenario mentioned above, the reactor operator has sufficient time to detect and react to the affected HX. Until now, analytical methodologies to predict the formation of these deposits have been developed, but never implemented in a high-fidelity computational tool suited to modern reactor design techniques. This paper summarizes the challenges and the current status in the development of a Computational Fluid Dynamics (CFD) methodology to predict deposit formation, with particular emphasis on sensitivity studies on some parameters affecting deposition.« less

Trichloroethylene and stoddard solvent reduction alternatives in a small shop. 1989 summer intern report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, D.J.

1989-12-31

Aero Precision Engineering Corp. is a small screw machine shop which produces precision parts for industry located in St. Paul Park, MN. The project focused on identifying satisfactory water-based substitutes for trichloroethylene (TCE) used both as a vapor degreaser and as a cold solvent in a small covered container. At the time of the project, the company used about 500 gallons of trichloroethylene with approximately 165 gallons shipped off site as waste annually. The solvent was used primarily to remove cutting oil and metal chips from production parts. In identifying a standard for evaluating alterantives to the solvent for cleaning,more » it was noted that parts cleaned in the cold bucket were definitely not as clean as those cleaned in the vapor degreaser.« less

ODYSSEUS autonomous walking robot: The leg/arm design

NASA Technical Reports Server (NTRS)

Bourbakis, N. G.; Maas, M.; Tascillo, A.; Vandewinckel, C.

1994-01-01

ODYSSEUS is an autonomous walking robot, which makes use of three wheels and three legs for its movement in the free navigation space. More specifically, it makes use of its autonomous wheels to move around in an environment where the surface is smooth and not uneven. However, in the case that there are small height obstacles, stairs, or small height unevenness in the navigation environment, the robot makes use of both wheels and legs to travel efficiently. In this paper we present the detailed hardware design and the simulated behavior of the extended leg/arm part of the robot, since it plays a very significant role in the robot actions (movements, selection of objects, etc.). In particular, the leg/arm consists of three major parts: The first part is a pipe attached to the robot base with a flexible 3-D joint. This pipe has a rotated bar as an extended part, which terminates in a 3-D flexible joint. The second part of the leg/arm is also a pipe similar to the first. The extended bar of the second part ends at a 2-D joint. The last part of the leg/arm is a clip-hand. It is used for selecting several small weight and size objects, and when it is in a 'closed' mode, it is used as a supporting part of the robot leg. The entire leg/arm part is controlled and synchronized by a microcontroller (68CH11) attached to the robot base.

Small part ultrasound in childhood and adolescence.

PubMed

Wunsch, R; von Rohden, L; Cleaveland, R; Aumann, V

2014-09-01

Small-part sonography refers to the display of small, near-surface structures using high-frequency linear array transducers. Traditional applications for small part ultrasound imaging include visualization and differential diagnostic evaluation in unclear superficial bodily structures with solid, liquid and mixed texture, as well as similar structures in nearly superficial organs such as the thyroid glands and the testes. Furthermore indications in the head and neck regions are the assessment of the outer CSF spaces in infants, the sonography of the orbit, the sonography of the walls of the large neck vessels, the visualization of superficially situated lymph nodes and neoplasms. Clinical evidence concludes that sonography, having of all imaging modalities the highest spatial resolution in the millimeter- and micrometer range (100-1000μm), can be considered the best suited technique for examining superficial pathological formations and near-surface organs. In addition, it delivers important information about characteristic, often pathognomonic tissue architecture in pathological processes. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Small Displacement Coupled Analysis of Concrete Gravity Dam Foundations: Static and Dynamic Conditions

NASA Astrophysics Data System (ADS)

Farinha, Maria Luísa Braga; Azevedo, Nuno Monteiro; Candeias, Mariline

2017-02-01

The explicit formulation of a small displacement model for the coupled hydro-mechanical analysis of concrete gravity dam foundations based on joint finite elements is presented. The proposed coupled model requires a thorough pre-processing stage in order to ensure that the interaction between the various blocks which represent both the rock mass foundation and the dam is always edge to edge. The mechanical part of the model, though limited to small displacements, has the advantage of allowing an accurate representation of the stress distribution along the interfaces, such as rock mass joints. The hydraulic part and the mechanical part of the model are fully compatible. The coupled model is validated using a real case of a dam in operation, by comparison of the results with those obtained with a large displacement discrete model. It is shown that it is possible to assess the sliding stability of concrete gravity dams using small displacement models under both static and dynamic conditions.

Marmosets as model species in neuroscience and evolutionary anthropology.

PubMed

Burkart, Judith M; Finkenwirth, Christa

2015-04-01

Marmosets are increasingly used as model species by both neuroscientists and evolutionary anthropologists, but with a different rationale for doing so. Whereas neuroscientists stress that marmosets share many cognitive traits with humans due to common descent, anthropologists stress those traits shared with marmosets - and callitrichid monkeys in general - due to convergent evolution, as a consequence of the cooperative breeding system that characterizes both humans and callitrichids. Similarities in socio-cognitive abilities due to convergence, rather than homology, raise the question whether these similarities also extend to the proximate regulatory mechanisms, which is particularly relevant for neuroscientific investigations. In this review, we first provide an overview of the convergent adaptations to cooperative breeding at the psychological and cognitive level in primates, which bear important implications for our understanding of human cognitive evolution. In the second part, we zoom in on two of these convergent adaptations, proactive prosociality and social learning, and compare their proximate regulation in marmosets and humans with regard to oxytocin and cognitive top down regulation. Our analysis suggests considerable similarity in these regulatory mechanisms presumably because the convergent traits emerged due to small motivational changes that define how pre-existing cognitive mechanisms are quantitatively combined. This finding reconciles the prima facie contradictory rationale for using marmosets as high priority model species in neuroscience and anthropology. Copyright © 2014 Elsevier Ireland Ltd and the Japan Neuroscience Society. All rights reserved.

25 CFR 39.143 - What is a small high school?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false What is a small high school? 39.143 Section 39.143... PROGRAM Indian School Equalization Formula Small School Adjustment § 39.143 What is a small high school? For purposes of this part, a small high school: (a) Is accredited under 25 U.S.C. 2001(b); (b) Is...

25 CFR 39.143 - What is a small high school?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What is a small high school? 39.143 Section 39.143... PROGRAM Indian School Equalization Formula Small School Adjustment § 39.143 What is a small high school? For purposes of this part, a small high school: (a) Is accredited under 25 U.S.C. 2001(b); (b) Is...

25 CFR 39.143 - What is a small high school?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false What is a small high school? 39.143 Section 39.143... PROGRAM Indian School Equalization Formula Small School Adjustment § 39.143 What is a small high school? For purposes of this part, a small high school: (a) Is accredited under 25 U.S.C. 2001(b); (b) Is...

25 CFR 39.143 - What is a small high school?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true What is a small high school? 39.143 Section 39.143 Indians... Indian School Equalization Formula Small School Adjustment § 39.143 What is a small high school? For purposes of this part, a small high school: (a) Is accredited under 25 U.S.C. 2001(b); (b) Is staffed with...

25 CFR 39.143 - What is a small high school?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false What is a small high school? 39.143 Section 39.143... PROGRAM Indian School Equalization Formula Small School Adjustment § 39.143 What is a small high school? For purposes of this part, a small high school: (a) Is accredited under 25 U.S.C. 2001(b); (b) Is...

Modeling Stokes flow in real pore geometries derived by high resolution micro CT imaging

NASA Astrophysics Data System (ADS)

Halisch, M.; Müller, C.

2012-04-01

Meanwhile, numerical modeling of rock properties forms an important part of modern petrophysics. Substantially, equivalent rock models are used to describe and assess specific properties and phenomena, like fluid transport or complex electrical properties. In recent years, non-destructive computed X-ray tomography got more and more important - not only to take a quick and three dimensional look into rock samples but also to get access to in-situ sample information for highly accurate modeling purposes. Due to - by now - very high resolution of the 3D CT data sets (micron- to submicron range) also very small structures and sample features - e.g. micro porosity - can be visualized and used for numerical models of very high accuracy. Special demands even arise before numerical modeling can take place. Inappropriate filter applications (e.g. improper type of filter, wrong kernel, etc.) may lead to a significant corruption of spatial sample structure and / or even sample or void space volume. Because of these difficulties, especially small scale mineral- and pore space textures are very often lost and valuable in-situ information is erased. Segmentation of important sample features - porosity as well as rock matrix - based upon grayscale values strongly depends upon the scan quality and upon the experience of the application engineer, respectively. If the threshold for matrix-porosity separation is set too low, porosity can be quickly (and even more, due to restrictions of scanning resolution) underestimated. Contrary to this, a too high threshold over-determines porosity and small void space features as well as interfaces are changed and falsified. Image based phase separation in close combination with "conventional" analytics, as scanning electron microscopy or thin sectioning, greatly increase the reliability of this preliminary work. For segmentation and quantification purposes, a special CT imaging and processing software (Avizo Fire) has been used. By using this tool, 3D rock data can be assessed and interpreted by petrophysical means. Furthermore, pore structures can be directly segmented and hence could be used for so called image based modeling approach. The special XLabHydro module grants a finite volume solver for the direct assessment of Stokes flow (incompressible fluid, constant dynamic viscosity, stationary conditions and laminar flow) in real pore geometries. Nevertheless, also pore network extraction and numerical modeling with standard FE or lattice Boltzmann solvers is possible. By using the achieved voxel resolution as smallest node distance, fluid flow properties can be analyzed even in very small sample structures and hence with very high accuracy, especially with interaction to bigger parts of the pore network. The so derived results in combination with a direct 3D visualization within the structures offer great new insights and understanding in range of meso- and microscopic pore space phenomena.

77 FR 20292 - Small Business Investment Companies-Conflicts of Interest and Investment of Idle Funds

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-04

... SMALL BUSINESS ADMINISTRATION 13 CFR Part 107 RIN 3245-AF56 Small Business Investment Companies--Conflicts of Interest and Investment of Idle Funds AGENCY: U.S. Small Business Administration. ACTION: Final... business investment company (SBIC) from providing financing to an Associate, as defined in the rules...

12 CFR 16.8 - Small issues.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Small issues. 16.8 Section 16.8 Banks and....8 Small issues. (a) The OCC will deem offers and sales of bank issued securities that satisfy the requirements of Commission Regulation A (17 CFR part 230, Regulation A—Conditional Small Issues Exemption) to...

40 CFR 766.2 - Applicability and duration of this part.

Code of Federal Regulations, 2011 CFR

2011-07-01

... person who, at any time during the duration of this part, manufactures (and/or imports), or processes, a... effective date of this part. (3) Small manufacturers are exempt from reporting process and reaction...

40 CFR 766.2 - Applicability and duration of this part.

Code of Federal Regulations, 2013 CFR

2013-07-01

... person who, at any time during the duration of this part, manufactures (and/or imports), or processes, a... effective date of this part. (3) Small manufacturers are exempt from reporting process and reaction...

40 CFR 766.2 - Applicability and duration of this part.

Code of Federal Regulations, 2014 CFR

2014-07-01

... person who, at any time during the duration of this part, manufactures (and/or imports), or processes, a... effective date of this part. (3) Small manufacturers are exempt from reporting process and reaction...

40 CFR 766.2 - Applicability and duration of this part.

Code of Federal Regulations, 2012 CFR

2012-07-01

... person who, at any time during the duration of this part, manufactures (and/or imports), or processes, a... effective date of this part. (3) Small manufacturers are exempt from reporting process and reaction...

Concept of an Exchange Network for the Development of Vocational Training in Small and Medium-Sized Enterprises.

ERIC Educational Resources Information Center

Boudet, Rene

An examination of the ways in which vocational training can be extended to small and medium-sized enterprises in the European Economic Community, this document consists of: an introduction; four parts containing multiple chapters; 10 case studies; and a bibliography. Following the introduction, which is an update of a report made in 1985, part one…

30 CFR 795.1 - Scope and purpose.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SMALL OPERATOR ASSISTANCE PERMANENT REGULATORY PROGRAM-SMALL OPERATOR ASSISTANCE PROGRAM § 795.1 Scope and purpose. This part comprises the Small Operator Assistance Program (SOAP) and establishes the procedures for...

Wind Tunnel Tests of Large- and Small-Scale Rotor Hubs and Pylons

DTIC Science & Technology

1981-04-01

formed by the engine nacelle and the nose gearbox. A fairing was wrapped around the nose gearbox and blended into the top and bottom of the engine...the variation is due to the FABs installation which acts like a small winglet . The large excursion ahead of Station 200 is due to the wing, the flow

Determination of small quantities of fluoride in water: A modified zirconium-alizarin method

USGS Publications Warehouse

Lamar, W.L.; Seegmiller, C.G.

1941-01-01

The zirconium-alizarin method has been modified to facilitate the convenient and accurate determination of small amounts of fluoride in a large number of water samples. Sulfuric acid is used to acidify the samples to reduce the interference of sulfate. The pH is accurately controlled to give the most sensitive comparisons. Most natural waters can be analyzed by the modified procedure without resorting to correction curves. The fluoride content of waters containing less than 500 parts per million of sulfate, 500 parts per million of bicarbonate, and 1000 parts per million of chloride may be determined within a limit of about 0.1 part per million when a 100-ml. sample is used.

Rigrod laser-pumped-laser resonator model: II. Application to thin and optically-dilute laser media

NASA Astrophysics Data System (ADS)

Brown, D. C.

2014-08-01

In part I of this paper, and to set the foundation for this part II, we derived the resonator equations describing the normalized intensities, output power, gain, and extraction efficiency for a standard resonator incorporating two dielectric mirrors and a gain element. We then generalized the results to include an absorbing region representing a second laser crystal characterized by a small-signal transmission T0. Explicit expressions were found for the output power extracted into absorption by the second laser crystal and the extraction efficiency, and the limits to each were discussed. It was shown that efficient absorption by a thin or dilute second laser crystal can be realized in resonators in which the mirror reflectivities were high and in which the single-pass absorption was low, due to the finite photon lifetime and multi-passing of the absorbing laser element. In this paper, we apply the model derived in part I to thin or dilute laser materials, concentrating on a Yb, Er:glass intracavity pumped by a 946 nm Nd:YAG laser, a Yb, Er:glass laser-pumped intracavity by a 977 nm diode laser, and an Er:YAG laser-pumped intracavity to a 1530 nm diode laser. It is shown that efficient absorption can be obtained in all cases examined.

Finite-fault slip model of the 2016 Mw 7.5 Chiloé earthquake, southern Chile, estimated from Sentinel-1 data

NASA Astrophysics Data System (ADS)

Xu, Wenbin

2017-05-01

Subduction earthquakes have been widely studied in the Chilean subduction zone, but earthquakes occurring in its southern part have attracted less research interest primarily due to its lower rate of seismic activity. Here I use Sentinel-1 interferometric synthetic aperture radar (InSAR) data and range offset measurements to generate coseismic crustal deformation maps of the 2016 Mw 7.5 Chiloé earthquake in southern Chile. I find a concentrated crustal deformation with ground displacement of approximately 50 cm in the southern part of the Chiloé island. The best fitting fault model shows a pure thrust-fault motion on a shallow dipping plane orienting 4° NNE. The InSAR-determined moment is 2.4 × 1020 Nm with a shear modulus of 30 GPa, equivalent to Mw 7.56, which is slightly lower than the seismic moment. The model shows that the slip did not reach the trench, and it reruptured part of the fault that ruptured in the 1960 Mw 9.5 earthquake. The 2016 event has only released a small portion of the accumulated strain energy on the 1960 rupture zone, suggesting that the seismic hazard of future great earthquakes in southern Chile is high.

Interdiffusion of Polycarbonate in Fused Deposition Modeling Welds

NASA Astrophysics Data System (ADS)

Seppala, Jonathan; Forster, Aaron; Satija, Sushil; Jones, Ronald; Migler, Kalman

2015-03-01

Fused deposition modeling (FDM), a now common and inexpensive additive manufacturing method, produces 3D objects by extruding molten polymer layer-by-layer. Compared to traditional polymer processing methods (injection, vacuum, and blow molding), FDM parts have inferior mechanical properties, surface finish, and dimensional stability. From a polymer processing point of view the polymer-polymer weld between each layer limits the mechanical strength of the final part. Unlike traditional processing methods, where the polymer is uniformly melted and entangled, FDM welds are typically weaker due to the short time available for polymer interdiffusion and entanglement. To emulate the FDM process thin film bilayers of polycarbonate/d-polycarbonate were annealed using scaled times and temperatures accessible in FDM. Shift factors from Time-Temperature Superposition, measured by small amplitude oscillatory shear, were used to calculate reasonable annealing times (min) at temperatures below the actual extrusion temperature. The extent of interdiffusion was then measured using neutron reflectivity. Analogous specimens were prepared to characterize the mechanical properties. FDM build parameters were then related to interdiffusion between welded layers and mechanical properties. Understating the relationship between build parameters, interdiffusion, and mechanical strength will allow FDM users to print stronger parts in an intelligent manner rather than using trial-and-error and build parameter lock-in.

Defect Detection on Carbon Fibre Reinforced Plastics (cfrp) with Laser Generated Lamb Waves

NASA Astrophysics Data System (ADS)

Focke, O.; Huke, P.; Hildebrandt, A.

2011-06-01

Standard ultrasound methods using a phased-array or a single transducer are commonly used for non-destructive evaluation (NDE) during manufacturing of carbon fiber reinforced plastics (CFRP) parts and certificated testing schemes were developed for individual parts and geometries. However, most testing methods need direct contact, matching gels and remain therefore time consuming. Laser-Ultrasonics is advantageous due to the contactless measurement technology and high accessibility even on complex parts. Despite the non-destructive testing with body waves, we show that the NDE can be expanded using two-dimensional surface (Lamb) waves for detection of delaminations close to the surface or small deteriorations caused by e.g. impacts. Lamb waves have been excited with a single transducer and with a short-pulse Laser with additionally producing A0-and S0-Lamb waves. The waves were detected with a shearography setup that allows for measuring two-dimensionally the displacement of a surface. Short integration times of the camera were realized using a pulsed ruby laser for illumination. As a consequence to the anisotropy the propagation in different directions exhibits individual characteristics like amplitude, damping and velocity. This has motivated to build up models for the propagation of Lamb waves and to compare them with experimental results.

A Diffraction Method of Study of Thermal Quasiorder in a Finite Two-Dimensional Harmonic Lattice

NASA Astrophysics Data System (ADS)

Aranda, P.; Croset, B.

1995-09-01

Due to the non-existence of long-range order, the diffraction peaks of 2D-solids are considered to have a power-law shape g_p^{η-2}. Taking into account the finite size effects and calculating the powder average, we show that this power-law behaviour appears only for high q_p and then for very small intensities. It is therefore quite difficult and hazardous to characterise the quasiorder by using this asymptotic behaviour. Although the shape of the central part of the peak cannot be used to characterise the quasiorder, we show that, for a fairly good resolution, it is possible to determine η using this central part. This determination can be done irrespectively with the other details of the system by comparing the peak width to its value at low temperature, i.e., at low value of η. By using two diffraction peaks, we propose the simple relation: η(Q_{B_1})/Q_{B_1}^2=η(Q_{B_2})/Q_{B_2}^2 as a check of the two-dimensional quasiorder.

Microwave and Millimeter Wave Properties of Vertically-Aligned Single Wall Carbon Nanotubes Films

NASA Astrophysics Data System (ADS)

Haddadi, K.; Tripon-Canseliet, C.; Hivin, Q.; Ducournau, G.; Teo, E.; Coquet, P.; Tay, B. K.; Lepilliet, S.; Avramovic, V.; Chazelas, J.; Decoster, D.

2016-05-01

We present the experimental determination of the complex permittivity of vertically aligned single wall carbon nanotubes (SWCNTs) films grown on quartz substrates in the microwave regime from 10 MHz up to 67 GHz, with the electrical field perpendicular to the main axis of the carbon nanotubes (CNTs), based on coplanar waveguide transmission line approach together with the measurement of the microwave impedance of top metalized vertically—aligned SWCNTs grown on conductive silicon substrates up to 26 GHz. From coplanar waveguide measurements, we obtain a real part of the permittivity almost equal to unity, which is interpreted in terms of low carbon atom density (3 × 1019 at/cm3) associated with a very low imaginary part of permittivity (<10-3) in the frequency range considered due to a very small perpendicular conductivity. The microwave impedance of a vertically aligned CNTs bundle equivalent to a low resistance reveals a good conductivity (3 S/cm) parallel to the CNTs axis. From these two kinds of data, we experimentally demonstrate the tensor nature of the vertically grown CNTs bundles.

Oxygen activation at the plasma membrane: relation between superoxide and hydroxyl radical production by isolated membranes.

PubMed

Heyno, Eiri; Mary, Véronique; Schopfer, Peter; Krieger-Liszkay, Anja

2011-07-01

Production of reactive oxygen species (hydroxyl radicals, superoxide radicals and hydrogen peroxide) was studied using EPR spin-trapping techniques and specific dyes in isolated plasma membranes from the growing and the non-growing zones of hypocotyls and roots of etiolated soybean seedlings as well as coleoptiles and roots of etiolated maize seedlings. NAD(P)H mediated the production of superoxide in all plasma membrane samples. Hydroxyl radicals were only produced by the membranes of the hypocotyl growing zone when a Fenton catalyst (FeEDTA) was present. By contrast, in membranes from other parts of the seedlings a low rate of spontaneous hydroxyl radical formation was observed due to the presence of small amounts of tightly bound peroxidase. It is concluded that apoplastic hydroxyl radical generation depends fully, or for the most part, on peroxidase localized in the cell wall. In soybean plasma membranes from the growing zone of the hypocotyl pharmacological tests showed that the superoxide production could potentially be attributed to the action of at least two enzymes, an NADPH oxidase and, in the presence of menadione, a quinone reductase.

Polarization-resolved simulations of multiple-order rainbows using realistic raindrop shapes

NASA Astrophysics Data System (ADS)

Haußmann, Alexander

2016-05-01

This paper presents selected results of a simulation study of the first five (primary-quinary) rainbow orders based on a realistic, size-dependent shape model for falling raindrops, taking into account that the drops' bottom part is flattened to higher degree than the dome-like top part. Moreover, broad drop size distributions are included in the simulations, as it is one goal of this paper to analyze, whether the predicted amplification and attenuation patterns for higher-order rainbows, as derived from previous simulations with monodisperse drop sizes, will still be pronounced under the conditions of natural rainfall. Secondly, deviations of the multiple rainbow orders' polarization state from the reference case of spherical drops are discussed. It is shown that each rainbow order may contain a small amount of circularly polarized light due to total internal reflections. Thirdly, it is investigated, how the conditions that generate twinned primary rainbows will affect the higher orders. For the simulations, geometric-optic ray tracing of the full Stokes vector as well as an approximate approach using appropriately shifted Debye series data is applied.