The surfaces of Larissa and Proteus

NASA Astrophysics Data System (ADS)

Stooke, Philip J.

1994-01-01

Topographic models of Neptune's small inner satellites Larissa and Proteus were derived from the shapes of limbs and terminators in Voyager images, modified locally to accomodate large craters and ridges. The models are presented here in tabular and graphic form, including the first map of Larissa and the first detailed relief map of Proteus. The shape of Larissa is approximated by a triaxial ellipsoid with axes of 208, 192 and 178 km, but is only weakly constrained by the single available view. The volume is estimated to be 3.5 +/- 1.0 x 106cu km. The surface is heavily cratered and may be crossed by one or two poorly seen linear ridges. Proteus is approximated by a triaxial ellipsoid with axes of 424, 390 and 396 km (the latter being the rotation axis dimension). The volume is estimated to be 3.4 +/- 0.4 x 107 cu km. Its surface appears to be very heavily cratered and extensive evidence for linear fractures is observed despite very low image quality.

Interactive High-Relief Reconstruction for Organic and Double-Sided Objects from a Photo.

PubMed

Yeh, Chih-Kuo; Huang, Shi-Yang; Jayaraman, Pradeep Kumar; Fu, Chi-Wing; Lee, Tong-Yee

2017-07-01

We introduce an interactive user-driven method to reconstruct high-relief 3D geometry from a single photo. Particularly, we consider two novel but challenging reconstruction issues: i) common non-rigid objects whose shapes are organic rather than polyhedral/symmetric, and ii) double-sided structures, where front and back sides of some curvy object parts are revealed simultaneously on image. To address these issues, we develop a three-stage computational pipeline. First, we construct a 2.5D model from the input image by user-driven segmentation, automatic layering, and region completion, handling three common types of occlusion. Second, users can interactively mark-up slope and curvature cues on the image to guide our constrained optimization model to inflate and lift up the image layers. We provide real-time preview of the inflated geometry to allow interactive editing. Third, we stitch and optimize the inflated layers to produce a high-relief 3D model. Compared to previous work, we can generate high-relief geometry with large viewing angles, handle complex organic objects with multiple occluded regions and varying shape profiles, and reconstruct objects with double-sided structures. Lastly, we demonstrate the applicability of our method on a wide variety of input images with human, animals, flowers, etc.

Structure and shale gas production patterns from eastern Kentucky field

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shumaker, R.C.

Computer-derived subsurface structure, isopach, and gas-flow maps, based on 4000 drillers logs, have been generated for eastern Kentucky under a project sponsored by the Gas Research Institute. Structure maps show low-relief flextures related to basement structure. Some structures have been mapped at the surface, others have not. Highest final open-flow (fof) of shale gas from wells in Martin County follow a structural low between (basement) anticlines. From there, elevated gas flows (fof) extend westward along the Warfield monocline to Floyd County where the high flow (fof) trend extends southward along the Floyd County channel. In Knott County, the number ofmore » wells with high gas flow (fof) decreases abruptly. The center of highest gas flow (fof) in Floyd County spreads eastward to Pike County, forming a triangular shaped area of high production (fof). The center of highest gas flow (fof) is in an area where possible (basement) structure trends intersect and where low-relief surface folds (probably detached structure) were mapped and shown on the 1922 version of the Floyd County structure map. Modern regional maps, based on geophysical logs from widely spaced wells, do not define the low-relief structures that have been useful in predicting gas flow trends. Detailed maps based on drillers logs can be misleading unless carefully edited. Comparative analysis of high gas flows (fof) and 10-year cumulative production figures in a small area confirms that there is a relationship between gas flow (fof) values and long-term cumulative production.« less

Effects of wheelchair cushions and pressure relief maneuvers on ischial interface pressure and blood flow in people with spinal cord injury.

PubMed

Sonenblum, Sharon E; Vonk, Teddie E; Janssen, Thomas W; Sprigle, Stephen H

2014-07-01

To investigate the effectiveness and interactions of 2 methods of pressure ulcer prevention, wheelchair cushions and pressure relief maneuvers, on interface pressure (IP) and blood flow of the buttocks. Within-subject repeated measures. Rehabilitation center. Wheelchair users with a spinal cord injury or disorder (N=17). Participants performed 3 forward leans and 2 sideward leans with different degrees of lean while seated on each of 3 different wheelchair cushions. IP measured with a custom sensor and blood flow measured with laser Doppler flowmetry were collected at the ischial tuberosity. Pressure relief maneuvers had a significant main effect on the ischial IP (P<.001); all maneuvers except for the small frontward lean resulted in a significant reduction in IP compared with upright sitting. Blood flow significantly varied across postures (P<.001) with flow during upright sitting and small forward leans being significantly lower than during the full and intermediate leans in both the forward and sideward directions. The results of the study highlight the importance of positioning wheelchair users in a manner that facilitates in-seat movement. Regardless of the cushion being used, the pressure relief maneuvers resulted in very large reductions in IPs and significant increases in buttock blood flow. Only the small frontward lean was shown to be ineffective in reducing pressure or increasing blood flow. Because these pressure relief maneuvers involved postural changes that can occur during functional activities, these pressure relief maneuvers can become a part of volitional pressure relief and functional weight shifts. Therefore, clinical instruction should cover both as a means to impart sitting behaviors that may lead to better tissue health. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Surface relief structures for multiple beam LO generation

NASA Technical Reports Server (NTRS)

Veldkamp, W. B.

1980-01-01

Linear and binary holograms for use in heterodyne detection with 10.6 micron imaging arrays are described. The devices match the amplitude and phase of the local oscillator to the received signal and thus maximize the system signal to noise ratio and resolution and minimize heat generation on the focal plane. In both the linear and binary approaches, the holographic surface-relief pattern is coded to generate a set of local oscillator beams when the relief pattern is illuminated by a single planewave. Each beam of this set has the same amplitude shape distribution as, and is collinear with, each single element wavefront illuminating array.

Modified duval procedure for small-duct chronic pancreatitis without head dominance.

PubMed

Oida, Takatsugu; Aramaki, Osamu; Kano, Hisao; Mimatsu, Kenji; Kawasaki, Atsushi; Kuboi, Youichi; Fukino, Nobutada; Kida, Kazutoshi; Amano, Sadao

2011-01-01

In the case of small-duct chronic pancreatitis, surgery for pain relief is broadly divided into resection and drainage procedures. These procedures should be selected according to the location of dominant lesion, diameter of the pancreatic duct and extent of the disease. The appropriate procedure for the treatment of small-duct chronic pancreatitis, especially small-duct chronic pancreatitis without head dominance, remains controversial. We developed the modified Duval procedure for the treatment of small-duct chronic pancreatitis without head dominance and determined the efficacy of this procedure. We retrospectively studied 14 patients who underwent surgical drainage with or without pancreatic resection for chronic pancreatitis with small pancreatic duct (<7mm) without head dominance. These patients were divided into 2 groups; the modified Puestow procedure group and the modified Duval procedure group. No complications occurred in the modified Duval group. In the modified Puestow procedure group, complete and partial pain relief were observed in 62.5%, and 37.5% of patients respectively. In contrast, complete pain relief was observed in all the patients in the modified Duval procedure group. Our modified Duval procedure is useful and should be considered the appropriate surgical technique for the treatment of small-duct chronic pancreatitis without head dominance.

Compact, compression-free, displaceable, and resealable vacuum feedthrough with built-in strain relief for sensitive components such as optical fibers.

PubMed

Buchholz, B; Ebert, V

2014-05-01

For the direct fiber coupling of small optical measurement cells, we developed a new compact vacuum feedthrough for glass fibers and other similarly shaped objects that are compact and that offer the possibility of adjusting the fiber in longitudinal and in circular direction. The feedthrough assembly avoids compression or torsion on the fiber and thus protects, e.g., highly frangible fiber materials. In the following, we will present a brief simulation of the tightness requirements for low-pressure and low-concentration water vapor measurements and we will explain an integrated concept for a displaceable and self-adjustable, compression-free, compact, ultra-high vacuum, resealable feedthrough with good strain relief. The feedthrough has been successfully tested in a laboratory test facility and in several extractive airborne tunable diode laser absorption spectroscopy hygrometers. The leakage rate of the feedthrough presented here was tested via a helium leak searcher and was quantified further in an 8-week vacuum measurement campaign. The leakage rate is determined to be 0.41 ± 0.04 × 10(-9) hPa l/s, which--to our knowledge--is the first time a leakage rate for such a feedthrough has been quantified.

Ant-nest ichnofossils in honeycomb calcretes, Neogene Ogallala Formation, High Plains region of western Kansas, U.S.A.

USGS Publications Warehouse

Smith, J.J.; Platt, B.F.; Ludvigson, Greg A.; Thomasson, J.R.

2011-01-01

Two new ant-nest trace fossils are described from calcic sandy paleosols of the Neogene Ogallala Formation in western Kansas. The ichnofossils are preserved within and below calcrete beds weathering in positive relief as carbonate-filled casts or as cavities in negative relief. Daimoniobarax ichnogenus nov. is established for burrow systems composed of vertically tiered, horizontally oriented pancake-shaped chambers connected by predominantly vertical and cylindrical shafts ~. 0.8. cm in diameter. Ichnospecies of Daimoniobarax are differentiated based on differences in the plan view outline of chambers, shaft orientation, and junctions between chambers and shafts.Daimoniobarax nephroides ichnospecies nov. is composed of an ~. 24-76. cm long vertical sequence of distinctly lobed chambers (~. 2-20. cm wide and ~. 1. cm high) arranged along sinuous to helical shafts. Chamber shape in plan view ranges from small teardrops to larger kidney- and U-shaped forms. Shafts intersect at chamber edges such that chambers appear to bud from the central shafts. Daimoniobarax nephroides is most similar to the nests of extant seed-harvester ants of the New World genus Pogonomyrmex. Such ants are specialized granivores and prefer sandy soils in arid to semi-arid grassland and desert regions.Daimoniobarax tschinkeli ichnospecies nov. is ~. 30-80. cm in vertical extent. Chambers (~. 2-30. cm wide and ~. 1. cm high) are circular to elongate or pseudopodial in plan view. Vertical shafts are straight to slightly sinuous and intersect most often toward the center of the chambers. The generalized architecture of D. tschinkeli is similar to that of the nests or nest portions of several extant ant genera, though it does not closely resemble any known modern nest.Ant ichnofossils provide valuable information on hidden biodiversity, paleohydrologic regimes, paleopedogenic processes, and paleoclimate during the time of nest occupation. Depth-related changes in chamber size and vertical spacing may also help interpret paleosurfaces and paleodepths, and serve as geopetal features. ?? 2011 Elsevier B.V.

Reference Frames and 3-D Shape Perception of Pictured Objects: On Verticality and Viewpoint-From-Above

PubMed Central

van Doorn, Andrea J.; Wagemans, Johan

2016-01-01

Research on the influence of reference frames has generally focused on visual phenomena such as the oblique effect, the subjective visual vertical, the perceptual upright, and ambiguous figures. Another line of research concerns mental rotation studies in which participants had to discriminate between familiar or previously seen 2-D figures or pictures of 3-D objects and their rotated versions. In the present study, we disentangled the influence of the environmental and the viewer-centered reference frame, as classically done, by comparing the performances obtained in various picture and participant orientations. However, this time, the performance is the pictorial relief: the probed 3-D shape percept of the depicted object reconstructed from the local attitude settings of the participant. Comparisons between the pictorial reliefs based on different picture and participant orientations led to two major findings. First, in general, the pictorial reliefs were highly similar if the orientation of the depicted object was vertical with regard to the environmental or the viewer-centered reference frame. Second, a viewpoint-from-above interpretation could almost completely account for the shears occurring between the pictorial reliefs. More specifically, the shears could largely be considered as combinations of slants generated from the viewpoint-from-above, which was determined by the environmental as well as by the viewer-centered reference frame. PMID:27433329

Why practice yoga? Practitioners' motivations for adopting and maintaining yoga practice.

PubMed

Park, Crystal L; Riley, Kristen E; Bedesin, Elena; Stewart, V Michelle

2016-06-01

We examined motives for adopting and maintaining yoga practice in a national survey of yoga practitioners (360 yoga students, 156 yoga teachers). Both students and teachers adopted yoga practice primarily for exercise and stress relief, but reported many other reasons, including flexibility, getting into shape, and depression/anxiety relief. Over 62 percent of students and 85 percent of teachers reported having changed their primary reason for practicing or discovering other reasons; for both, the top changed primary reason was spirituality. Findings suggest that most initiate yoga practice for exercise and stress relief, but for many, spirituality becomes their primary reason for maintaining practice. © The Author(s) 2014.

Orographic barriers GIS-based definition of the Campania-Lucanian Apennine Range (Southern Italy)

NASA Astrophysics Data System (ADS)

Cuomo, Albina; Guida, Domenico

2010-05-01

The presence of mountains on the land surfaces plays a central role in the space-time dynamics of the hydrological, geomorphic and ecological systems (Roe G. H., 2005). The aim of this paper is to identify, delimitate and classify the orographic relief in the Campania - Lucanian Apennine (Southern Italy) to investigate the effects of large-scale orographic and small-scale windward-leeward phenomena on distribution, frequency and duration of rainfall. The scale-dependent effects derived from the topographic relief favor the utilization of a hierarchical and multi-scale approach. The approach is based on a GIS procedure applied on Digital Elevation Model (DEM) with 20 meters cell size and derived from Regional Technical Map (CTR) of Campania region (1:5000). The DEM has been smoothed from data spikes and pits and we have then proceed to: a) Identify the three basic landforms of the relief (summit, hillslope and plain) by generalizing a previous 10-type landforms using the TPI method (Weiss A. 2001) and by simplifying the established rules of the differential geometry on topographic surface; b) Delimitate the mountain relief by modifying the method proposed by O. Z. Chaudhry and W. A. Mackaness (2008). It is based on three concepts: prominence , morphological variability and parent-child relationship. Graphical results have shown a good spatial correspondence between the digital definition of mountains and their morpho-tectonic structure derived from tectonic geomorphological studies; c) Classify, by using a set rules of spatial statistics (Cluster analysis) on geomorphometric parameters (elevation, curvature, slope, aspect, relative relief and form factor). Finally, we have recognized three prototypal orographic barriers shapes: cone, tableland and ridge, which are fundamental to improve the models of orographic rainfall in the Southern Apennines. References Chaudhry O. Z.and Mackaness W. A. (2008). Creating Mountains out of Mole Hills: Automatic Identification of Hills and Ranges Using Morphometric Analysis. Transactions in GIS. 12(5), pp. 567-589 Roe Gerard H. 2005. Orographic precipitation. Annual Review of Earth and Planetary Sciences. Vol. 33: 645-671. Weiss A., 2001. Topographic position and landform analysis. Poster Presentation. ESRI User Conference. San Diego, CA.

LASER APPLICATIONS AND OTHER TOPICS IN QUANTUM ELECTRONICS: On the possibility of studying the temporal evolution of a surface relief directly during exposure to high-power radiation

NASA Astrophysics Data System (ADS)

Abramov, D. V.; Arakelyan, S. M.; Galkin, A. F.; Klimovskii, Ivan I.; Kucherik, A. O.; Prokoshev, V. G.

2006-06-01

The video image of the graphite surface exposed to focused laser radiation is obtained with the help of a laser monitor. A bright ring moving over the heated surface was observed. A method for reconstructing the surface relief from the video image is proposed and realised. The method is based on the measurement of the angular distribution of the light intensity scattered by the graphite sample surface. The surface relief of the graphite sample changing in time is reconstructed. The relative change in the relief height during laser excitation is measured. The statistical characteristics of the reconstructed graphite surface shape and their variation during laser irradiation are studied. It is found that a circular convexity appears within the bright ring. The formation mechanism of this convexity requires further investigations.

Modeling Defects, Shape Evolution, and Programmed Auto-origami in Liquid Crystal Elastomers

NASA Astrophysics Data System (ADS)

Konya, Andrew; Gimenez-Pinto, Vianney; Selinger, Robin

2016-06-01

Liquid crystal elastomers represent a novel class of programmable shape-transforming materials whose shape change trajectory is encoded in the material’s nematic director field. Using three-dimensional nonlinear finite element elastodynamics simulation, we model a variety of different actuation geometries and device designs: thin films containing topological defects, patterns that induce formation of folds and twists, and a bas-relief structure. The inclusion of finite bending energy in the simulation model reveals features of actuation trajectory that may be absent when bending energy is neglected. We examine geometries with a director pattern uniform through the film thickness encoding multiple regions of positive Gaussian curvature. Simulations indicate that heating such a system uniformly produces a disordered state with curved regions emerging randomly in both directions due to the film’s up/down symmetry. By contrast, applying a thermal gradient by heating the material first on one side breaks up/down symmetry and results in a deterministic trajectory producing a more ordered final shape. We demonstrate that a folding zone design containing cut-out areas accommodates transverse displacements without warping or buckling; and demonstrate that bas-relief and more complex bent/twisted structures can be assembled by combining simple design motifs.

RoboSimian Disaster Relief Poster Artist Concept

NASA Image and Video Library

2015-03-11

This artist's concept shows RoboSimian, a robot intended to assist with disaster relief and mitigation. RoboSimian is an ape-like robot that moves around on four limbs. It was designed and built at the Jet Propulsion Laboratory in Pasadena, California. It will compete in the 2015 DARPA Robotics Challenge Finals. To get the robot in shape for the contest, researchers at JPL are collaborating with partners at University of California, Santa Barbara, and the California Institute of Technology. http://photojournal.jpl.nasa.gov/catalog/PIA19313

Geological mapping of lunar highland crater Lalande: Topographic configuration, morphology and cratering process

NASA Astrophysics Data System (ADS)

Li, Bo; Ling, Zongcheng; Zhang, Jiang; Chen, Jian; Liu, ChangQing; Bi, Xiangyu

2018-02-01

Highland crater Lalande (4.45°S, 8.63°W; D = 23.4 km) is located on the PKT area of the lunar near side, southeast of the Mare Insularum. It is a complex crater in Copernican era and has three distinguishing features: high silicic anomaly, the highest Th abundance and special landforms on its floor. There are some low-relief bulges on the left of Lalande's floor with regular circle or ellipse shapes. They are ∼250-680 m wide and ∼30-91 m high with maximum flank slopes >20°. There are two possible scenarios for the formation of these low-relief bulges which are impact melt products or young silicic volcanic eruptions. We estimated the absolute model ages of the ejecta deposits, several melt ponds and the hummocky floor and determined the ratio of diameter and depth of the crater Lalande. In addition, we found some similar bugle features within other Copernican-aged craters and there were no volcanic source vents on Lalande's floor. Thus, we hypothesized that these low-relief bulges were most consistent with an origin of impact melts during the crater formation instead of small and young volcanic activities occurring on the floor. Based on Kaguya Terrain Camera (TC) ortho-mosaic and Digital Terrain Model (DTM) data produced by TC imagery in stereo, geological units and some linear features on the floor and wall of Lalande have been mapped. Eight geological units are organized by crater floor units: hummocky floor, central peak and low-relief bulges; and crater wall units: terraced walls, channeled and veneered walls, interior walls, mass wasting areas, blocky areas, and melt ponds. These geological units and linear features provided us a chance to understand some details of the cratering process and elevation differences on the floor. We proposed that subsidence due to melt cooling, late-stage wall collapse and rocks uplifted from beneath the surface could be the possible causes of the observed elevation differences on Lalande's floor.

Characterization of relief printing

NASA Astrophysics Data System (ADS)

Liu, Xing; Chen, Lin; Ortiz-Segovia, Maria-Valezzka; Ferwerda, James; Allebach, Jan

2014-03-01

Relief printing technology developed by Océ allows the superposition of several layers of colorant on different types of media which creates a variation of the surface height defined by the input to the printer. Evaluating the reproduction accuracy of distinct surface characteristics is of great importance to the application of the relief printing system. Therefore, it is necessary to develop quality metrics to evaluate the relief process. In this paper, we focus on the third dimension of relief printing, i.e. height information. To achieve this goal, we define metrics and develop models that aim to evaluate relief prints in two aspects: overall fidelity and surface finish. To characterize the overall fidelity, three metrics are calculated: Modulation Transfer Function (MTF), difference and root-mean-squared error (RMSE) between the input height map and scanned height map, and print surface angle accuracy. For the surface finish property, we measure the surface roughness, generate surface normal maps and develop a light reflection model that serves as a simulation of the differences between ideal prints and real prints that may be perceived by human observers. Three sets of test targets are designed and printed by the Océ relief printer prototypes for the calculation of the above metrics: (i) twisted target, (ii) sinusoidal wave target, and (iii) ramp target. The results provide quantitative evaluations of the printing quality in the third dimension, and demonstrate that the height of relief prints is reproduced accurately with respect to the input design. The factors that affect the printing quality include: printing direction, frequency and amplitude of the input signal, shape of relief prints. Besides the above factors, there are two additional aspects that influence the viewing experience of relief prints: lighting condition and viewing angle.

Remote sensing evidence of lava-ground ice interactions associated with the Lost Jim Lava Flow, Seward Peninsula, Alaska

NASA Astrophysics Data System (ADS)

Marcucci, Emma C.; Hamilton, Christopher W.; Herrick, Robert R.

2017-12-01

Thermokarst terrains develop when ice-bearing permafrost melts and causes the overlying surface to subside or collapse. This process occurs widely throughout Arctic regions due to environmental and climatological factors, but can also be induced by localized melting of ground ice by active lava flows. The Lost Jim Lava Flow (LJLF) on the Seward Peninsula of Alaska provides evidence of former lava-ground ice interactions. Associated geomorphic features, on the scale of meters to tens of meters, were identified using satellite orthoimages and stereo-derived digital terrain models. The flow exhibits positive- and mixed-relief features, including tumuli ( N = 26) and shatter rings ( N = 4), as well as negative-relief features, such as lava tube skylights ( N = 100) and irregularly shaped topographic depressions ( N = 1188) that are interpreted to include lava-rise pits and lava-induced thermokarst terrain. Along the margins of the flow, there are also clusters of small peripheral pits that may be the products of meltwater or steam escape. On Mars, we observed morphologically similar pits near lava flow margins in northeastern Elysium Planitia, which suggests a common formation mechanism. Investigating the LJLF may therefore help to elucidate processes of lava-ground ice interaction on both Earth and Mars.

Exploring Formation Models for Ceres Tholi and Montes

NASA Astrophysics Data System (ADS)

Ruesch, O.; Platz, T.; McFadden, L. A.; Hiesinger, H.; Schenk, P.; Sykes, M. V.; Schmidt, B. E.; Buczkowski, D.; Thangjam, G.; Raymond, C. A.; Russell, C. T.

2015-12-01

Dawn Framing Camera (FC) images of Ceres surface revealed tholi and mons, i.e., positive relief features with sub-circular to irregular basal shapes and varying height to diameter ratios and flank slopes. These domes and mounts are tentatively interpreted as volcanic constructs [1]. Alternative formation mechanisms, e.g., uplifting by diapirism or shallow intrusions [e.g., 2], could have also led to the observed features with different geological implications. FC images derived local digital elevation models reveal that the largest dome on Ceres (near Rongo crater) has a ~100 km wide base, concave downward margins with slopes of 10°-20°, a relatively flat top reaching altitudes of ~5 km relative to surrounding, and a summit pit chain of putative endogenic origin. A relevant mons on Ceres is a cone-shaped relief (10°S/316°E) with a ~30x20 km base, reaching a high of ~5 km relative to surroundings. Flank slopes approach a concave upward shape. These constructs are located in a complex geological area having resurfaced units with onlap contacts. Because of the varying morphometries of the reliefs, we explore several physical models of volcanic constructs, e.g., steep-sided dome and shield volcano. Physical models are based on radially spreading viscous gravity currents with a free upper surface [e.g., 3, 4]. Testing formation scenarios will exploit recently developed methods, such as time-variable viscosity and fixed-volume models [5], and constant flow rate models [6]. We aim to provide constraints on viable emplacement mechanisms for the different reliefs. [1] Platz et al. (2015), EPSC abstract 915, vol. 10; [2] Fagents, S.A. (2003), JGR, vol. 108, E12, 5139; [3] Huppert, H. (1982), J. Fluid Mech., vol. 121, pp. 43-58; [4] Lacey et al. (1981), EPSL, vol. 54, pp. 139-143; [5] Glaze et al. (2012), LPSC abstract 1074 ; [6] Glaze et al. (2015), LPSC abstract 1326.

Progress in the application of landform analysis in studies of semiarid erosion

USGS Publications Warehouse

Schumm, Stanley Alfred; Hadley, R.F.

1961-01-01

The analysis of topographic and hydrologic data gathered during studies of erosion in semiarid areas of Western United States show the following relation: (a) Mean annual sediment yield from small drainage basins is related to a ratio of basin relief to length; (b) mean annual runoff from small drainage basins is related to drainage density; (c) mean annual sediment yield per unit area decreases with increase in drainage area; (d) the form of some convex hill slopes is related to surficial creep; (e) asymmetry of drainage basins, including differences in hill-slope erosion and drainage density, is related to microclimatic variations on slopes of diverse exposure; .(f) the cutting of discontinuous gullies is closely related to steepening by deposition of the semiarid valley floor; (g) aggradation in ephemeral streams seems to be most prevalent in reaches where the ratio of contributing drainage area to channel length is relatively small; and (h) streamchannel shape, expressed as a width-depth ratio, is related to the percentage of silt-clay in bed and bank alluvium. The above relations cannot be detected without measurement of terrain characteristics. They further indicate the importance of quantitative terrain analysis in studies of erosion.

Ubiquitous Creation of Bas-Relief Surfaces with Depth-of-Field Effects Using Smartphones.

PubMed

Sohn, Bong-Soo

2017-03-11

This paper describes a new method to automatically generate digital bas-reliefs with depth-of-field effects from general scenes. Most previous methods for bas-relief generation take input in the form of 3D models. However, obtaining 3D models of real scenes or objects is often difficult, inaccurate, and time-consuming. From this motivation, we developed a method that takes as input a set of photographs that can be quickly and ubiquitously captured by ordinary smartphone cameras. A depth map is computed from the input photographs. The value range of the depth map is compressed and used as a base map representing the overall shape of the bas-relief. However, the resulting base map contains little information on details of the scene. Thus, we construct a detail map using pixel values of the input image to express the details. The base and detail maps are blended to generate a new depth map that reflects both overall depth and scene detail information. This map is selectively blurred to simulate the depth-of-field effects. The final depth map is converted to a bas-relief surface mesh. Experimental results show that our method generates a realistic bas-relief surface of general scenes with no expensive manual processing.

Ubiquitous Creation of Bas-Relief Surfaces with Depth-of-Field Effects Using Smartphones

PubMed Central

Sohn, Bong-Soo

2017-01-01

This paper describes a new method to automatically generate digital bas-reliefs with depth-of-field effects from general scenes. Most previous methods for bas-relief generation take input in the form of 3D models. However, obtaining 3D models of real scenes or objects is often difficult, inaccurate, and time-consuming. From this motivation, we developed a method that takes as input a set of photographs that can be quickly and ubiquitously captured by ordinary smartphone cameras. A depth map is computed from the input photographs. The value range of the depth map is compressed and used as a base map representing the overall shape of the bas-relief. However, the resulting base map contains little information on details of the scene. Thus, we construct a detail map using pixel values of the input image to express the details. The base and detail maps are blended to generate a new depth map that reflects both overall depth and scene detail information. This map is selectively blurred to simulate the depth-of-field effects. The final depth map is converted to a bas-relief surface mesh. Experimental results show that our method generates a realistic bas-relief surface of general scenes with no expensive manual processing. PMID:28287487

75 FR 25156 - High-Cost Universal Service Support, Federal-State Joint Board on Universal Service, Lifeline and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-07

... contain any new, modified, or proposed ``information collection burden for small business concerns with fewer than 25 employees'' pursuant to the Small Business Paperwork Relief Act of 2002. B. Initial... same meaning as the terms ``small business,'' ``small organization,'' and ``small governmental...

Using Miniature Landforms in Teaching Geomorphology.

ERIC Educational Resources Information Center

Petersen, James F.

1986-01-01

This paper explores the uses of true landform miniatures and small-scale analogues and suggests ways to teach geomorphological concepts using small-scale relief features as illustrative examples. (JDH)

Schiaparelli Crater Rim and Interior Deposits - High Resolution Image

NASA Technical Reports Server (NTRS)

1998-01-01

A portion of the rim and interior of the large impact crater Schiaparelli is seen at high resolution in this image acquired October 18, 1997 by the Mars Global Surveyor Orbiter Camera (MOC). The area covered is very small--3.9 X 10.2 km (2.4 X 6.33 mi)--but is seen at 63 times higher resolution than the Viking image. The subdued relief and bright surface are attributed to blanketing by dust; many small craters have been completely filled in, and only the most recent (and very small) craters appear sharp and bowl-shaped. Some of the small craters are only 10-12 m (30-35 feet) across. Occasional dark streaks on steeper slopes are small debris slides that have probably occurred in the past few decades. The two prominent, narrow ridges in the center of the image may be related to the adjustment of the crater floor to age or the weight of the material filling the basin.

Malin Space Science Systems (MSSS) and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.

Sorted bedforms developed on sandy lobes fed by small ephemeral streams (Catalan continental shelf)

NASA Astrophysics Data System (ADS)

Durán, R.; Guillén, J.; Muñoz, A.; Guerrero, Q.

2016-12-01

The morphology and sedimentological characteristics of sorted bedforms identified in the Catalan continental shelf (NW Mediterranean Sea) have been characterized using multibeam echosounder data and sediment samples collected in 2013 within the FORMED project. Bathymetric data was compared with previous data gathered in 2004 within the ESPACE project to assess the decadal stability of these bedforms. The sorted bedforms were observed on the inner shelf at water depths from 10 to 40 m, along a coastal stretch of more than 3 km. They are associated with elongated patches of low backscatter, corresponding to fine sand. The fine-grained sediment patches are located off small bays fed by short, intermittent streams, extending down to 40 m water depth. The sorted bedforms exhibit elongated shapes with subtle relief (up to 1 m) and are oriented nearly perpendicular to the shoreline. In cross-section, the sorted bedforms display lateral symmetry in bathymetric relief and backscatter, with high backscatter corresponding to poorly sorted coarse sand (median size of 0.55-0.96 mm) centered on the bathymetric depression, and low backscatter consisting of well-sorted fine to medium sand (median sized of 0.22-0.35 mm) on the crest. The local input of well-sorted fine sand supplied by ephemeral streams over the coarse sand domain of the infralittoral prograding wedge contributes to the bed sediment heterogeneity (mixture of sediment), which is further reorganized into sorted bedforms. The sorted bedforms are better developed in deeper waters (20-40 m) than near the shoreline, probably due to stronger wave forcing in the shallower shelf that prevents the maintenance of these morphologies. At a decadal time scale, the morphological evolution of these bedforms indicates that they are persistent features, showing small changes in their boundaries, which is in agreement with previous observations and numerical simulations that highlighted the persistence and long-term stability of sorted bedforms at water depths greater than 15-20 m over annual or even decadal timescales.

Guidance, steering, load relief and control of an asymmetric launch vehicle. M.S. Thesis - MIT

NASA Technical Reports Server (NTRS)

Boelitz, Frederick W.

1989-01-01

A new guidance, steering, and control concept is described and evaluated for the Third Phase of an asymmetrical configuration of the Advanced Launch System (ALS). The study also includes the consideration of trajectory shaping issues and trajectory design as well as the development of angular rate, angular acceleration, angle of attack, and dynamic pressure estimators. The Third Phase guidance, steering and control system is based on controlling the acceleration-direction of the vehicle after an initial launch maneuver. Unlike traditional concepts, the alignment of the estimated and commanded acceleration-directions is unimpaired by an add-on load relief. Instead, the acceleration-direction steering-control system features a control override that limits the product of estimated dynamic pressure and estimated angle of attack. When this product is not being limited, control is based exclusively on the commanded acceleration-direction without load relief. During limiting, control is based on nulling the error between the limited angle of attack and the estimated angle of attack. This limiting feature provides full freedom to the acceleration-direction steering and control to shape the trajectory within the limit, and also gives full priority to the limiting of angle of attack when necessary. The flight software concepts were analyzed on the basis of their effects on pitch plane motion.

What Do Geoscience Experts and Novices Look At and What Do They See When Viewing and Interpreting Data Visualizations?

NASA Astrophysics Data System (ADS)

Kastens, K. A.; Shipley, T. F.; Boone, A.

2012-12-01

When geoscience experts look at data visualizations, they can "see" structures, and processes and traces of Earth history. When students look at those same visualizations, they may see only blotches of color, dots or squiggles. What are those experts doing, and how can students learn to do the same? We report on a study in which experts (>10 years of geoscience research experience) and novices (undergrad psychology students) examine shaded-relief/color-coded images of topography/bathymetry, while answering questions aloud and being eye-tracked. Images were a global map, two high-res images of continental terrain and two of oceanic terrain, with hi-res localities chosen to display distinctive traces of important earth processes. The differences in what they look at as recorded by eye-tracking are relatively subtle. On the global image, novices tend to focus on continents, whereas experts distribute their attention more evenly across continents and oceans. Experts universally access the available scale information (distance scale, lat/long axes), whereas most students do not. Novices do attend substantially and spontaneously to the salient geomorphological features in the high-res images: seamounts, mid-ocean ridge/transform intersection, erosional river channels, and compressional ridges and valley system. The more marked differences come in what respondents see, as captured in video recordings of their words and gestures in response to experimenter's questions. When their attention is directed to a small and distinctive part of a high-res image and they are asked to "….describe what you see…", experts typically produce richly detailed descriptions that may include the regional depth/altitude, local relief, shape and spatial distribution of major features, symmetry or lack thereof, cross-cutting relationships, presence of lineations and their orientations, and similar geomorphological details. Following or interwoven with these rich descriptions, some experts also offer interpretations of causal Earth processes. We identified four types of novice answers: (a) "flat" answers, in which the student describes the patches of color on the screen with no mention of shape or relief; (b) "thing" answers, in which the student mentions an inappropriate object, such as "the Great Wall of China," (c) geomorphology answers, in which the student talks about depth/altitude, relief, or shapes of landforms, and (d) process answers, in which student talks about earth processes, such as earthquakes, erosion, or plate tectonics. Novice "geomorphology" (c) answers resemble expert responses, but lack the rich descriptive detail. The "process" (d) category includes many interpretations that lack any grounding in the evidentiary base available in the viewed data. These findings suggest that instruction around earth data should include an emphasis on thoroughly and accurately describing the features that are present in the data--a skill that our experts display and our novices mostly lack. It is unclear, though, how best to sequence the teaching of descriptive and interpretive skills, since the experts' attention to empirical features in the data is steered by their knowledge of which features have causal significance.

Global small-scale lunar cartography

NASA Technical Reports Server (NTRS)

Lipskiy, Y. N.; Pskovskiy, Y. P.; Rodionova, Z. F.; Shevchenko, V. V.; Chikmachev, V. I.; Volchkova, L. I.

1972-01-01

The primary sources information for compiling this map were the photographs of the visible hemisphere obtained by earth-based observatories, the Luna 3 and Zond 3 pictures, and a small number of Lunar Orbiter pictures. The primary content of the complete lunar map is the surface relief and its tonal characteristics. In preparing the map, particular attention was devoted to the variety of lunar relief forms. The color spectrum of the map was selected not only for the natural coloring of the lunar surface, but also with the objective of achieving maximum expressiveness. A lunar globe to scale 1:10 million was prepared along with the preparation of the map. The scale of the globe, half that of the map, led to some selection and generalization of the relief forms. The globe permits maintaining simultaneously geometric similarity of contours, exact proportions of areas, and identical scales in all directions. The globe was prepared in both the Latin and Russian languages.

Glacier Dynamics Within a Small Alpine Cirque

NASA Astrophysics Data System (ADS)

Sanders, J. W.; Cuffey, K. M.; MacGregor, K. R.; Kavanaugh, J. L.; Dow, C. F.

2008-12-01

Cirques, with their steep walls and overdeepened basins, have captivated the imagination of scientists since the mid-1800s. Glaciers in cirques, by generating these spectacular amphitheater-shaped landforms, contribute significantly to erosion in the core of mountain ranges and are one of the principal agents responsible for the relief structure at high elevations. Yet comprehensive studies of the dynamics of cirque glaciers, and their link to erosional processes, have never been undertaken. To this end, we acquired an extensive new set of measurements at the West Washmawapta Glacier, which sits in a cirque on the east side of Helmet Mountain in the Vermillion Range of the Canadian Rockies. Ice thickness surveys with ground penetrating radar revealed that the glacier occupies a classic bowl-shaped depression complete with a nearly continuous riegel. Using GPS-derived surface velocities of a glacier-wide grid network and the tilt of one borehole, we calculated the complete force balance of the glacier. This analysis also produced a map of basal sliding velocity and a value for the viscosity of temperate ice. We will discuss the implications of these findings for the problem of how cirques are formed by glacial erosion.

Small Business Community Partner Relief Act of 2010

THOMAS, 111th Congress

Sen. Landrieu, Mary L. [D-LA

2010-03-25

Senate - 03/25/2010 Read twice and referred to the Committee on Small Business and Entrepreneurship. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Business Emergency Loan Relief Act of 2009

THOMAS, 111th Congress

Sen. Brown, Sherrod [D-OH

2009-10-20

Senate - 10/20/2009 Read twice and referred to the Committee on Small Business and Entrepreneurship. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

76 FR 66914 - Amendment of Limitation of Duty- and Quota-Free Imports of Apparel Articles Assembled in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-28

... eligible fabrics, fabric components, or components knit-to-shape. Title VII of the Tax Relief and Health... Clothing (ATC), and the conversion factors for units of measure into square meter equivalents used by the...

Southeast Hurricanes Small Business Disaster Relief Act of 2011

THOMAS, 112th Congress

Sen. Landrieu, Mary L. [D-LA

2011-03-28

Senate - 03/28/2011 Read twice and referred to the Committee on Small Business and Entrepreneurship. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Southeast Hurricanes Small Business Disaster Relief Act of 2010

THOMAS, 111th Congress

Sen. Landrieu, Mary L. [D-LA

2010-02-04

Senate - 02/04/2010 Read twice and referred to the Committee on Small Business and Entrepreneurship. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Strain relief for power-cable connectors

NASA Technical Reports Server (NTRS)

Dean, W. T., III

1980-01-01

Easily fabricated grommet composed of polytetrafluoroethylene cylinder, containing U-shaped channels equally spaced around periphery, is used in power cable connectors to relieve strain on cables. Utilization of grommets provides more ease in cable insertion and removal. Potential applications include wiring in large residential and commercial buildings.

Flow diagnostics in unseeded air

NASA Technical Reports Server (NTRS)

Miles, R.; Lempert, W.

1990-01-01

Several approaches are presented for the quantitative measurement of flowfield parameters in high-speed flows. The techniques are developed for the study of air flows in the Mach 2 to Mach 3 regime and can be extended to the hypersonic and subsonic regimes in a straightforward manner. Instantaneous two-dimensional cross-sectional images of the density using UV Rayleigh scattering and the measurement of velocity profiles using the RELIEF technique are shown. The RELIEF technique employs two high-powered lasers separated in frequency by the vibrational frequency of oxygen molecules to write lines across the flowfield by stimulated Raman scattering. The preliminary results indicate that the UV Rayleigh scattering may also be extended to the measurement of velocity and temperature fields by using an atomic or molecular absorption filter window, and that the RELIEF technique can be extended to marking shaped volumetric points or arrays of points in the flowfield for velocity and vorticity measurements.

Are calanco landforms similar to river basins?

PubMed

Caraballo-Arias, N A; Ferro, V

2017-12-15

In the past badlands have been often considered as ideal field laboratories for studying landscape evolution because of their geometrical similarity to larger fluvial systems. For a given hydrological process, no scientific proof exists that badlands can be considered a model of river basin prototypes. In this paper the measurements carried out on 45 Sicilian calanchi, a type of badlands that appears as a small-scale hydrographic unit, are used to establish their morphological similarity with river systems whose data are available in the literature. At first the geomorphological similarity is studied by identifying the dimensionless groups, which can assume the same value or a scaled one in a fixed ratio, representing drainage basin shape, stream network and relief properties. Then, for each property, the dimensionless groups are calculated for the investigated calanchi and the river basins and their corresponding scale ratio is evaluated. The applicability of Hack's, Horton's and Melton's laws for establishing similarity criteria is also tested. The developed analysis allows to conclude that a quantitative morphological similarity between calanco landforms and river basins can be established using commonly applied dimensionless groups. In particular, the analysis showed that i) calanchi and river basins have a geometrically similar shape respect to the parameters Rf and Re with a scale factor close to 1, ii) calanchi and river basins are similar respect to the bifurcation and length ratios (λ=1), iii) for the investigated calanchi the Melton number assumes values less than that (0.694) corresponding to the river case and a scale ratio ranging from 0.52 and 0.78 can be used, iv) calanchi and river basins have similar mean relief ratio values (λ=1.13) and v) calanchi present active geomorphic processes and therefore fall in a more juvenile stage with respect to river basins. Copyright © 2017 Elsevier B.V. All rights reserved.

40 CFR 80.1343 - What hardship relief provisions are available only to small refiners?

Code of Federal Regulations, 2010 CFR

2010-07-01

... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Small... to the first compliance period for that refiner for up to two years. (2) No delay in accordance with...

Phase recording for formation of holographic optical elements on silver-halide photographic emulsions

NASA Astrophysics Data System (ADS)

Ganzherli, Nina M.; Gulyaev, Sergey N.; Maurer, Irina A.; Chernykh, Dmitrii F.

2009-05-01

Holographic fabrication methods of regular and nonregular relief-phase structures on silver-halide photographic emulsions are considered. Methods of gelatin photodestruction under short-wave ultra-violet radiation and chemical hardening with the help of dichromated solutions were used as a technique for surface relief formation. The developed techniques permitted us to study specimens of holographic diffusers and microlens rasters with small absorption and high light efficiency.

Shape of lenticulae on Europa and their interaction with lineaments.

NASA Astrophysics Data System (ADS)

Culha, Cansu; Manga, Michael

2015-04-01

The surface of Europa contains many elliptical features that have been grouped into three classes: (a) positive relief (domes), (b) negative relief (pits), or (c) complex terrain (small chaos). Collectively, these three classes of features are often called "lenticulae". The internal processes that form lenticulae are unknown. However, given that the diameters of all these features are similar, it is parsimonious to ascribe each class of feature to a different stage in the evolution of some process occurring within the ice shell. Proposed models for these features including diapirs (Sotin et al., 2002; Rathbun et al., 1998); melting above diapirs (Schmidt et al., 2011); and sills of water (Michaut and Manga, 2014). The objective of the present study is to first characterize the shape of lecticulae, and then look at the interaction of lenticulae with lineaments, in order to test lenticulae formation mechanisms. Lenticulae and lineaments are mapped and annotated on ArcGIS. We mapped a total of 57 pits and 86 domes. Both pits and domes have similar aspect ratios and orientations. The elliptical similarities of domes and pits suggest that domes and pits are surface expressions of different stages of a common process within the ice shell. The cross cutting relationships between lineaments reveal relative age. Lineaments either lie over or under the lenticulae. All of the lineament segments that appear within pits also appear topographically lower than the rest of the surface. Domes lie over and under lineaments, but unlike pits there are lineaments that lie over domes that do not vary in topography. This suggests that the lineaments that lie above lenticulae and match the lenticulae's topography are older than the lenticulae. Domes have more crossing lineaments. Therefore, on average, they appear to be older than pits. Lineaments also appear on the sides of lenticulae. There are two different ways in which adjacent lineaments appear: 1. they disrupt the shape of the lenticulae; 2. they are tangent to the edge of the lenticulae. These observations suggest that lineaments that interrupt the shape of lenticulae are younger than the lenticulae, and the lineaments tangent to lenticulae are older than the lenticulae. The shape of the disrupted lenticulae, which has lost its elliptical shape due to the lineament, implies that the ice behaves rigidly on either side of the lineament. Furthermore, lenticulae do not perturb lineaments during lineament formation. Last, pits that have lineaments tangent to them appear sheared or compressed, suggesting that pits could be influenced by the stresses that form lineaments. References: [1] Sotin, C., Head, J.W., and Tobie, G. (2002) Geophys. Res. Lett., 29, 74/1-4. [2] Rathbun, J.A., Musser, G.S., and Squyres, S.W. (1998), Geophys. Res. Lett., 25, 4157-4160. [3] Schmidt, B.E., Blankenship, D.D., Patterson, G.W. and Schenk, P.M. (2011) Nature, 479, 502-505. [4] Michaut, C. and Manga, M. (2014), J. Geophys. Res. Planets, 119, 550.

Lifestyles of the palaeoproterozoic stromatolite builders in the Vempalle Sea, Cuddapah Basin, India

NASA Astrophysics Data System (ADS)

Patranabis-Deb, Sarbani; Majumder, Tuasha; Khan, Sayani

2018-05-01

The distribution and changing pattern of stromatolites in the Vempalle Formation of the Cuddapah Basin, India, have been investigated with emphasis on external morphologies, internal fabrics, growth patterns and sediment associations. The stromatolitic limestone occurs in a low angle ramp type carbonate platform, with complete exposures from shallow shelf to basinal facies, provides record of changes in reef-building capacity of stromatolites with change in the depositional milieu. Changing pattern and style of the stromatolites clearly reflect depth partitioned growth of the microbial community. Small and scattered stromatolites, commonly with wavy parallel laminations or stratifications occurred in inner-ramp settings, where they are build up to the sea level. Tepee structure and desiccation cracks in associated sediments and salt pseudomorphs point to shallow water to occasional exposure condition. Large bioherms with columnar and conical stromatolites developed in the headland (mid ramp), which were in continuous interaction with strong waves of the open sea. Growth of the bioherms changed the landform with time and generated a high sloping edge with a sheer drop that extended out into the sea, forming distally steepened ramp. Outer ramp lithofacies characterized by thick layers of shale succession with thin beds of laterally persistent stromatolitic beds with low synoptic relief build-ups. These biotic components, along with the absence of wave-related structures, place the outer ramp below the base of wave action zone. Ooid banks developed in the mid ramp area are in the high surfing zone. High flux of nutrients and high-light show positive correlation; thus the high growth pattern is best observed within the photic zone where wave action is maximum. The ability to change from low synoptic relief algal laminites to high synoptic relief columnar stromatolites point to their adaptive power. The key factor that controlled the shape of these Palaeoproterozoic stromatolites is the dynamic interactions between mat growth, currents and sediment supply. Presence of concentric and radial fibrous ooids indicates change in climate and salinity of the sea.

Geology and Geochemistry of Magmatic Rocks from the Southern Part of the Kyushu-Palau Ridge in the Philippine Sea

NASA Astrophysics Data System (ADS)

Lelikov, E. P.; Sedin, V. T.; Pugachev, A. A.

2018-03-01

The paper reports the results of a geochemical study of volcanogenic rocks from the southern part of the Kyushu-Palau Ridge. Volcanic structures, such as plateaulike rises, mountain massifs, and single volcanoes, are the major relief-forming elements of the southern part of the Kyushu-Palau Ridge. They are divided into three types according to the features of the relief and geological structure: shield, cone-shaped, and dome-shaped volcanoes. The ridge was formed on oceanic crust in the Late Mesozoic and underwent several stages of evolution with different significance and application of forces (tension and compression). Change in the geodynamic conditions during the geological evolution of the ridge mostly determined the composition of volcanic rocks of deep-mantle nature. Most of the ridge was formed by the Early Paleogene under geodynamic conditions close to the formation of oceanic islands (shield volcanoes) under tension. The island arc formed on the oceanic basement in the compression mode in the Late Eocene-Early Oligocene. Dome-shaped volcanic edifices composed of alkaline volcanic rocks were formed in the Late Oligocene-Early Miocene under tension. Based on the new geochemical data, detailed characteristics of volcanic rocks making up the shield, cone-shape, and dome-shape stratovolcanoes resulting in the features of these volcanic edifices are given for the first time. Continuous volcanism (with an age from the Cretaceous to the Late Miocene and composition from oceanic tholeiite to calc-alkaline volcanites of the island arc type) resulting in growth of the Earth's crust beneath the Kyushu-Palau Ridge was the major factor in the formation this ridge.

40 CFR 80.1343 - What hardship relief provisions are available only to small refiners?

Code of Federal Regulations, 2013 CFR

2013-07-01

... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Small... annual average benzene standard at § 80.1230(a). (b) In the case of a small refiner approved under § 80.1340 for which compliance with the maximum average benzene requirement at § 80.1230(b) is not feasible...

40 CFR 80.1343 - What hardship relief provisions are available only to small refiners?

Code of Federal Regulations, 2014 CFR

2014-07-01

... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Small... annual average benzene standard at § 80.1230(a). (b) In the case of a small refiner approved under § 80.1340 for which compliance with the maximum average benzene requirement at § 80.1230(b) is not feasible...

40 CFR 80.1343 - What hardship relief provisions are available only to small refiners?

Code of Federal Regulations, 2011 CFR

2011-07-01

... AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Gasoline Benzene Small... annual average benzene standard at § 80.1230(a). (b) In the case of a small refiner approved under § 80.1340 for which compliance with the maximum average benzene requirement at § 80.1230(b) is not feasible...

New descriptor for skeletons of planar shapes: the calypter

NASA Astrophysics Data System (ADS)

Pirard, Eric; Nivart, Jean-Francois

1994-05-01

The mathematical definition of the skeleton as the locus of centers of maximal inscribed discs is a nondigitizable one. The idea presented in this paper is to incorporate the skeleton information and the chain-code of the contour into a single descriptor by associating to each point of a contour the center and radius of the maximum inscribed disc tangent at that point. This new descriptor is called calypter. The encoding of a calypter is a three stage algorithm: (1) chain coding of the contour; (2) euclidean distance transformation, (3) climbing on the distance relief from each point of the contour towards the corresponding maximal inscribed disc center. Here we introduce an integer euclidean distance transform called the holodisc distance transform. The major interest of this holodisc transform is to confer 8-connexity to the isolevels of the generated distance relief thereby allowing a climbing algorithm to proceed step by step towards the centers of the maximal inscribed discs. The calypter has a cyclic structure delivering high speed access to the skeleton data. Its potential uses are in high speed euclidean mathematical morphology, shape processing, and analysis.

Effect of antenatal education in small classes versus standard auditorium-based lectures on use of pain relief during labour and of obstetric interventions: results from the randomised NEWBORN trial.

PubMed

Brixval, Carina Sjöberg; Thygesen, Lau Caspar; Axelsen, Solveig Forberg; Gluud, Christian; Winkel, Per; Lindschou, Jane; Weber, Tom; Due, Pernille; Koushede, Vibeke

2016-06-10

To examine the effect of an antenatal education programme in small classes versus standard auditorium-based lectures. Randomised trial using random-generated web-based 1:1 allocation. The largest birth site in the Capital Region of Denmark, from August 2012 to May 2014. 1766 pregnant women. Inclusion criteria ≥18 years, pregnant with a single child, and able to speak and understand Danish. Women were enrolled in the trial from 10+0 to 20+0 weeks of gestation. The intervention programme consisted of three times 2.5 hours of antenatal education in small classes (n=6-8 women), and focused on improving information and problem-solving skills for expectant parents in order to ease birth and the transition to parenthood. The control group received standard auditorium-based lectures consisting of two times 2 hours in an auditorium with participation of ∼250 people. The primary trial outcome was use of epidural analgesia. Other types of pain relief and obstetric interventions were analysed as explorative outcomes. There was no statistically significant difference in use of epidural analgesia between participants in the intervention group (30.9%) versus the control group (29.1%), adjusted OR 1.10 (95% CI 0.87 to 1.34). Also, the two groups did not differ regarding other types of pain relief or obstetric interventions. Concomitant birth preparation was common in both groups and highest in the control group, but did not seem to influence our results noticeably. Antenatal education in small groups versus standard auditorium-based lectures did not differ regarding use of epidural analgesia, other pain relief, or obstetric interventions. NCT01672437; Results. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Shock wave interaction with L-shaped structures

NASA Astrophysics Data System (ADS)

Miller, Richard C.

1993-12-01

This study investigated the interaction of shock waves with L-shaped structures using the CTH hydrodynamics code developed by Sandia National Laboratories. Computer models of shock waves traveling through air were developed using techniques similar to shock tube experiments. Models of L-shaped buildings were used to determine overpressures achieved by the reflecting shock versus angle of incidence of the shock front. An L-shaped building model rotated 45 degrees to the planar shock front produced the highest reflected overpressure of 9.73 atmospheres in the corner joining the two wings, a value 9.5 times the incident overpressure of 1.02 atmospheres. The same L-shaped building was modeled with the two wings separated by 4.24 meters to simulate an open courtyard. This open area provided a relief path for the incident shock wave, creating a peak overpressure of only 4.86 atmospheres on the building's wall surfaces from the same 1.02 atmosphere overpressure incident shock wave.

Building relations with women's organisations in relief work.

PubMed

Gell, F

1997-02-01

An Oxfam Emergency Team arrived in Ingushetia in the Northern Caucasus region of the former Soviet Union in August 1996 to set up a program of shelter, rehabilitation, and relief in response to the large influx of people displaced by conflicts in the neighboring republics of Chechnya and North Ossetia. The team was also tasked with contacting community organizations such as women's groups and developing a relationship with them through joint relief work. The Chechen population was comprised of mainly women, children, and the elderly. The internally displaced population of 100,000 people is now scattered throughout the republic in collective centers and host families. Small committees of women were formed to help identify the most vulnerable residents and to distribute winter clothing. It was found during the relief work that fledgling women's groups are establishing themselves as vehicles for change, increasingly open to work with and learn from international organizations such as Oxfam. The Chechen branch of the Union of North Caucasian Women and the Ingushetian ALMOS played leading roles in peacemaking, human rights observance, and humanitarian relief.

38 CFR 74.1 - What definitions are important for VetBiz Vendor Information Pages (VIP) Verification Program?

Code of Federal Regulations, 2014 CFR

2014-07-01

... venture for joint profit, for which purpose they combine their efforts, property, money, skill, or..., Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS...'s Office of Small and Disadvantaged Business Utilization. The CVE helps veterans interested in...

38 CFR 74.1 - What definitions are important for VetBiz Vendor Information Pages (VIP) Verification Program?

Code of Federal Regulations, 2013 CFR

2013-07-01

... venture for joint profit, for which purpose they combine their efforts, property, money, skill, or..., Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS...'s Office of Small and Disadvantaged Business Utilization. The CVE helps veterans interested in...

Meditations on White Space.

ERIC Educational Resources Information Center

Cane, Tina

2003-01-01

Contends that to mindfully appreciate the shape a poem carves onto a page is to view its words and lines in relief, to consider how the contours of a poem contribute to its meaning. Explains that the notion of blank space as a defining element of poetry is simple yet radical, and is a subtle challenge to students who define poetry as beautiful…

Effect size comparison of ketorolac nasal spray and commonly prescribed oral combination opioids for pain relief after third molar extraction surgery.

PubMed

Niebler, Gwendolyn; Dayno, Jeffrey

2016-01-01

Opioids are frequently used for treatment of moderate to severe short-term pain, but concerns exist about this treatment approach. Ketorolac tromethamine nasal spray, a nonsteroidal anti-inflammatory, is indicated for the short-term management of moderate to moderately severe pain requiring analgesia at the opioid level. However, there are no direct comparison studies between ketorolac nasal spray and opioids. The objective of this study was to use an effect size analysis to compare the effectiveness of ketorolac nasal spray with oral combination opioid formulations in treating moderate to severe short-term pain. An effect size analysis of three randomized, double-blind, placebo-controlled studies of third molar extraction surgery compared pain relief with ketorolac nasal spray and commonly prescribed combination opioids including hydrocodone/acetaminophen (APAP), oxycodone/APAP, oxycodone/ibuprofen and tramadol HCl/APAP. Effect size comparisons were made using total pain relief scores (TOTPAR6 or TOTPAR8; the weighted sum of pain relief scores through 6 or 8 h). Pain relief was measured using a five-point categorical rating scale (0 = none; 4 = complete). The effect size equivalent correlation, r, was determined using an online effect size calculator. The treatment effect size r compared with placebo was classified using established criteria (small = 0.20-0.49, moderate = 0.50-0.79 and large = ≥ 0.80). TOTPAR6 data indicated a moderate effect size for ketorolac nasal spray 31.5 mg (0.51) and oxycodone/ibuprofen 5/400 mg (0.64) and a small effect size for hydrocodone/APAP 7.5/500 mg (0.24) and oxycodone/APAP 5/325 mg (0.32). TOTPAR8 data indicated small effect sizes for ketorolac nasal spray (0.48), hydrocodone/APAP 10/650 mg (0.43), tramadol HCl/APAP 75/650 mg (0.35) and tramadol HCl/APAP 37.5/325 mg (0.17). The treatment effect sizes of ketorolac nasal spray were similar to or higher than the opioid comparators after third molar surgery, a well-accepted pain model. These results support ketorolac nasal spray as an effective treatment for moderate to moderately severe short-term pain.

[Myocardial perfusion imaging by digital subtraction angiography].

PubMed

Kadowaki, H; Ishikawa, K; Ogai, T; Katori, R

1986-03-01

Several methods of digital subtraction angiography (DSA) were compared to determine which could better visualize regional myocardial perfusion using coronary angiography in seven patients with myocardial infarction, two with angina pectoris and five with normal coronary arteries. Satisfactory DSA was judged to be achieved if the shape of the heart on the mask film was identical to that on the live film and if both films were exactly superimposed. To obtain an identical mask film in the shape of each live film, both films were selected from the following three phases of the cardiac cycle; at the R wave of the electrocardiogram, 100 msec before the R wave, and 200 msec before the R wave. The last two were superior for obtaining mask and live films which were similar in shape, because the cardiac motion in these phases was relatively small. Using these mask and live films, DSA was performed either with the continuous image mode (CI mode) or the time interval difference mode (TID mode). The overall perfusion of contrast medium through the artery to the vein was adequately visualized using the CI mode. Passage of contrast medium through the artery, capillary and vein was visualized at each phase using TID mode. Subtracted images were displayed and photographed, and the density of the contrast medium was adequate to display contour lines as in a relief map. Using this DSA, it was found that regional perfusion of the contrast medium was not always uniform in normal subjects, depending on the typography of the coronary artery.(ABSTRACT TRUNCATED AT 250 WORDS)

Surface Roughness Relief

NASA Astrophysics Data System (ADS)

Marras, L.; Fontana, R.; Gambino, M. C.; Greco, M.; Materazzi, M.; Pampaloni, E.; Pezzati, L.; Poggi, P.

The knowledge of the shape of an artwork is an important element for its study and conservation. When dealing with a stone statue, roughness measurement is a very useful contribution to document its surface conditions, to assess either changes due to restoration intervention or surface decays due to weathering agents, and to monitor its time-evolution in terms of shape variations. In this work we present the preliminary results of the statistical analysis carried out on acquired data relative to six areas of the Michelangelo's David marble statue, representative of differently degraded surfaces. Determination of the roughness and its relative characteristic wavelength is shown.

Effect of Cover Thickness on the Relationship of Surface Relief to Diameter of Northern Lowland QCDs on Mars

NASA Technical Reports Server (NTRS)

Buczkowski, D. L.; Frey, H. V.; McGill, G. E.

2005-01-01

Previous work has established that there is a relationship of surface relief to diameter for quasi-circular depressions (QCDs) around the Utopia Basin [1]. This relationship has been used to support the contention that the QCDs represent impact craters buried beneath a differentially compacting cover material. For any given regional cover thickness, total cover thickness is greater over the centers of completely buried craters than over their rims; thus total compaction is greater over the center of craters than their rims and topographic depressions will form. Since large craters are deeper than small craters, differential compaction models also predict that surface relief will be proportional to the diameter of the buried crater [2]. It is highly unlikely, however, that the material covering the QCD impact craters is a consistent thickness throughout the entire northern lowlands of Mars. We explore the effects that changes in cover thickness would have on the surface relief vs. diameter relationship of QCDs.

77 FR 20553 - Relay Services for Deaf-Blind Individuals

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-05

... business hours at the FCC Reference Information Center, Portals II, 445 12th Street SW., Room CY- A257... addition, the Commission notes that pursuant to the Small Business Paperwork Relief Act of 2002, Public Law... reduce the information collection burden for small business concerns with fewer than 25 employees.'' See...

Geomorphic characterization of hilly relief in the north alpine foreland basin: The Hausruck- and Kobernaußerwald region

NASA Astrophysics Data System (ADS)

Baumann, Sebastian; Robl, Jörg; Keil, Melanie; Salcher, Bernhard

2014-05-01

The area of the Hausruck and Kobernaußerwald represents the highest relief of the Molasse Basin in Upper Austria. The region is characterized by a dissected landscape with elevation differences of 400 m and peaks reaching up to 800 m. The latest marine influence of this realm is dated to 11 Ma before present and constrains the onset of the inversion of the peripheral alpine foreland basin. Since that time the relief evolution is controlled by surface uplift and fluvial erosion. The Hausruck-Kobernaußerwald region forms a local watershed and is drained by three drainage systems that are tributaries of the Inn River, the Traun River and the Trattnach River. The Danube River represents the base level for all these streams. In contrary to the nearby Eastern Alps the study area shows no evidence for local deformation or glacial overprint. Therefore, the Hausruck- Kobernaußerwald region represents a perfect testing ground to explore the evolution of relief in a setting of regional uplift and relative base level lowering. This is done by characterizing the fluvial and hillslope system and exploring the effect of contrasting lithology and different base levels. We further give constraints on the geomorphological state of equilibrium and provide a discussion about the spatial position of the highest relief within the Molasse Basin in Upper Austria. Therefore, we have performed a series of morphometric analyses on a high resolution LiDAR digital elevation model. This includes longitudinal channel profiles, the best fit concavity index, the steepness and the normalized steepness index, the slope-area relationship, the slope elevation distribution and hypsometric curves of all individual catchments. All longitudinal channel profiles are graded and show a concave form without any natural knickpoints with best fit concavity indices in the range of 0.35 and 0.55. All observed knick points in the channel profiles could be traced back to an anthropogenic impact like bridges or culverts. Interestingly, the transition from one lithological unit to another does not influence the channel slopes in the profiles suggesting that the erodibility of different rock types is in the same order of magnitude. The contributing drainage area and channel slope for all catchments of the study area follow a power law relationship as proposed by Hack. The transition from hillslope- to fluvial processes is observed in channel slope-drainage area plots and is consistently identified in longitudinal channel profiles at very small drainage areas (A < 0.05 km²). Hypsometric curves commonly show a S-shaped form with hypsometric integrals close to 0.5 suggesting a topographic steady-state of the study area.

The Role of Higher Education Associations in Shaping Policy that Connects Immigration to Educational Opportunity: A Social Capital Framework

ERIC Educational Resources Information Center

Ortega, Noe

2011-01-01

This study utilizes social capital theory to examine the collective agency available to national higher education associations and better understand the power of the collectivity to influence policy. The analysis draws on a specific issue, the Development, Relief, and Education for Alien Minors Act, and investigates letters and statements…

Centimeter-scale subwavelength photolithography using metal-coated elastomeric photomasks with modulated light intensity at the oblique sidewalls.

PubMed

Wu, Jin; Liu, Yayuan; Guo, Yuanyuan; Feng, Shuanglong; Zou, Binghua; Mao, Hui; Yu, Cheng-han; Tian, Danbi; Huang, Wei; Huo, Fengwei

2015-05-05

By coating polydimethylsiloxane (PDMS) relief structures with a layer of opaque metal such as gold, the incident light is strictly allowed to pass through the nanoscopic apertures at the sidewalls of PDMS reliefs to expose underlying photoresist at nanoscale regions, thus producing subwavelength nanopatterns covering centimeter-scale areas. It was found that the sidewalls were a little oblique, which was the key to form the nanoscale apertures. Two-sided and one-sided subwavelength apertures can be constructed by employing vertical and oblique metal evaporation directions, respectively. Consequently, two-line and one-line subwavelength nanopatterns with programmable feature shapes, sizes, and periodicities could be produced using the obtained photomasks. The smallest aperture size and line width of 80 nm were achieved. In contrast to the generation of raised positive photoresist nanopatterns in phase shifting photolithography, the recessed positive photoresist nanopatterns produced in this study provide a convenient route to transfer the resist nanopatterns to metal nanopatterns. This nanolithography methodology possesses the distinctive advantages of simplicity, low cost, high throughput, and nanoscale feature size and shape controllability, making it a potent nanofabrication technique to enable functional nanostructures for various potential applications.

Stress-relief cracking of a new ferritic steel

NASA Astrophysics Data System (ADS)

Nawrocki, Jesse Gerald

The mechanism of stress-relief cracking in the coarse-grained heat-affected zone (CGHAZ) of low-alloy ferritic steels was studied through a tempering study, stress-relaxation testing, and detailed microstructural characterization. A new ferritic alloy steel, HCM2S, was used as the model system. Common 2.25Cr-1 Mo steel, which is susceptible to stress-relief cracking, was used for comparison to HCM2S. The CGHAZ was simulated using Gleeble techniques. A dense distribution of small tungsten-rich carbides within the prior austenite grains induced secondary hardening in the CGHAZ of HCM2S. The CGHAZ of 2.25Cr-1 Mo steel exhibited secondary hardening due to the intragranular precipitation of many Fe-rich M3C carbides. The hardness of HCM2S was more stable at longer times and high temperatures than 2.25Cr-1 Mo steel due to the intragranular precipitation of small W and V-rich carbides. The CGHAZs of HCM2S and 2.25Cr-1 Mo steel were susceptible to stress-relief cracking between 575 and 725°C. HCM2S exhibited C-curve behavior with respect to the time to failure as a function of post-weld heat treatment (PWHT) temperature. No segregation of tramp elements to prior austenite grain boundaries was detected in HCM2S. Both intergranular and intragranular carbide precipitation controlled the stress-relief cracking behavior. The amount of intergranular failure increased with test temperature due to the increasing amounts of Fe-rich M3C carbides at the prior austenite grain boundaries. These carbides acted as cavity nucleation sites. The cavities coalesced to form microcracks along prior austenite grain boundaries. Eventually, the remaining uncracked areas could not support the load and failed by ductile rupture. The balance of intergranular and intragranular carbide precipitation resulted in the C-curve behavior. The nose of the C-curve occurred at 675°C. The intragranular regions were strong because of a dense distribution of W/Fe-rich carbides, but the prior austenite grain boundaries were weak due to a large amount of intergranular M3C carbides. A mechanism for stress-relief cracking in the CGHAZ of HCM2S has been proposed. The results of this study form a basis for heat treating and welding processing variables for HCM2S and 2.25Cr-1 Mo steel to avoid stress-relief cracking. In addition, these results can be applied to other materials to avoid microstructures susceptible to stress-relief cracking.

Analysis of laser radar measurements of the asteroid 433 Eros

NASA Astrophysics Data System (ADS)

Cole, Timothy D.; Zuber, Maria T.; Neuman, Greg; Cheng, Andrew F.; Reiter, R. Alan; Guo, Yanping; Smith, David E.

2001-09-01

After a 5-year mission, a 4-year transit followed by a one-year mission orbiting the asteroid 433 Eros, the Near-Earth Asteroid Rendezvous-Shoemaker (NEAR) spacecraft made a controlled landing onto the asteroid's surface on 12 February 2001. Onboard the spacecraft, the NEAR Laser Rangefinder (NLR) facility instrument had gathered over 11 million measurements, providing a spatially dense, high-resolution, topographical map of Eros. This topographic data, combined with Doppler tracking data for the spacecraft, enabled the determination of the asteroid's shape, mass, and density thereby contributing to understanding the internal structure and collisional evolution of Eros. NLR data indicate that Eros is a consolidated body with a complex shape dominated by collisions. The offset between the asteroid's center of mass and center of figure indicates a small deviation from a homogeneous internal structure that is most simply explained by variations in mechanical structure. Regional-scale relief and slope distributions show evidence for control of some topography by a competent substrate. It was found that pulse dilation was the major source of uncertainty in single-shot range measurements from the NLR, and that this uncertainty remains consistent with the overall 6-m range measurement system accuracy for NEAR. Analysis of NLR data fully quantified the geodynamic nature of this planetesimal, ergo, illustrating the utility of laser altimetry for remote sensing.

Fine-scale Patterns in Thaw Depth, Micro-relief, and Ground Cover on Non-sorted Circles and Small Patterned Ground Features Along a Climatic Gradient From Low to High Arctic

NASA Astrophysics Data System (ADS)

Okie, J.; Gould, W. A.; González, G.

2006-12-01

Patterned ground is a ubiquitous feature in the Arctic and the related variation in microtopographic relief strongly affects biotic and abiotic patterns and processes. Patterned ground features are polygenic in origin and are often found superimposed in a complex pattern of multiple features. We investigated the relationship between thaw depth, micro-relief, the cover of vascular, bryophyte, cryptogamic crust and bare ground along transects traversing non-sorted circles and small non-sorted polygons at 8 research sites along a climatic gradient in bioclimatic subzones A-E in the North American Arctic. Non-sorted circles are the result of differential frost heave with circle centers typically showing greater heave during freezing than inter circle areas. Differential heave is a function of climate, soil texture, soil moisture, and vegetation cover. Differential heave and subsidence creates fine-scale gradients in microtopography that affect soil moisture, exposure to winds, and development of vegetation and soils. Non-sorted circles typically range from 20 to 200 cm in diameter and are most common in subzones C-E. Often superimposed on these features are the development of small non-sorted polygons 10-30 cm in diameter, and fine-scale desiccation cracking at a scale of less than 10 cm. These are most common in subzones A-C. We established three 20 m transects in zonal vegetation at each site. Thaw depth, micro-relief, and ground cover were measured at 10 cm intervals along each transect. Additionally, we measured vascular plant beta diversity in a set of 25 x 25 cm quadrates on 15 circles and 15 inter circles at each site. The resulting pattern of thaw depth and micro-relief is correlated with both summer temperatures and vegetation cover. The variability and degree of micro-relief decrease from the Low to the High Arctic. Non-sorted circle centers had deeper active layer than inter circle areas along the gradient. Thaw depths increase linearly with the degree of bare ground and nonlinearly with summer warmth. This unimodal pattern of shallower active layer at the warmest and coldest sites is due to the interaction of climate and the insulating vegetation layer. Greatest thaw depths are found on bare non-sorted circles in subzone C. Beta diversity is greatest in subzone D, where vegetated inter circle areas differ markedly from more barren non- sorted circles.

Drainage basin and topographic analysis of a tropical landscape: Insights into surface and tectonic processes in northern Borneo

NASA Astrophysics Data System (ADS)

Mathew, Manoj Joseph; Menier, David; Siddiqui, Numair; Ramkumar, Mu.; Santosh, M.; Kumar, Shashi; Hassaan, Muhammad

2016-07-01

We investigated the recent landscape development of Borneo through geomorphic analysis of two large drainage basins (Rajang and Baram basins). The extraction of morphometric parameters utilizing digital terrain data in a GIS environment, focusing on hydrography (stream length-gradient index, ratio of valley floor width to valley height, and transverse topographic symmetry factor) and topography (local relief and relief anomaly), was carried out in order to elucidate processes governing drainage and landscape evolution. Anomalously high and low values of stream length-gradient indices of main tributary streams associated with faults and multiple knick-points along the channel profiles are linked to deformation events. The development of deeply incised V-shaped valleys show enhanced incision capability of streams in response to steepening of hillslope gradients following tectonic inputs. Deflection of streams and probable dynamic reorganization of the drainage system through stream capture processes as feedbacks to tectonic uplift and orographic effect are observed. Local relief and relief anomaly maps highlight the presence of preserved elevation-accordant relict portions of landscapes characterized by low amplitude relief, nested between ridgelines in regions of complex folding. Our results reveal dynamic geomorphic adjustment of the landscape due to perturbations in tectonic and climatic boundary conditions. The implication is that the landscape of north Borneo experienced a tectonic phase of rapid uplift after 5 Ma and undergoes active folding of the Rajang Group thrust belts in the present-day. Active shortening combined with high rates of denudation in Sarawak, demonstrates transience emphasized by the drainage system attempting to adjust to tectonic and climatic forcing.

21 CFR 524.981a - Fluocinolone acetonide cream.

Code of Federal Regulations, 2012 CFR

2012-04-01

... for the relief of pruritus and inflammation associated with certain superficial acute and chronic... superficial inflammation caused by chemical and physical abrasions and burns. (2) A small amount is applied to...

21 CFR 524.981a - Fluocinolone acetonide cream.

Code of Federal Regulations, 2010 CFR

2010-04-01

... for the relief of pruritus and inflammation associated with certain superficial acute and chronic... superficial inflammation caused by chemical and physical abrasions and burns. (2) A small amount is applied to...

21 CFR 524.981a - Fluocinolone acetonide cream.

Code of Federal Regulations, 2013 CFR

2013-04-01

... for the relief of pruritus and inflammation associated with certain superficial acute and chronic... superficial inflammation caused by chemical and physical abrasions and burns. (2) A small amount is applied to...

21 CFR 524.981a - Fluocinolone acetonide cream.

Code of Federal Regulations, 2011 CFR

2011-04-01

... for the relief of pruritus and inflammation associated with certain superficial acute and chronic... superficial inflammation caused by chemical and physical abrasions and burns. (2) A small amount is applied to...

Small Airport Relief Act of 2009

THOMAS, 111th Congress

Sen. Nelson, Ben [D-NE

2009-06-08

Senate - 06/08/2009 Read twice and referred to the Committee on Commerce, Science, and Transportation. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Business Development Centers Relief Act of 2010

THOMAS, 111th Congress

Rep. Kratovil, Frank, Jr. [D-MD-1

2010-03-24

House - 03/24/2010 Referred to the Subcommittee on Rural Development, Entrepreneurship and Trade. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Scarp Close-up

NASA Image and Video Library

2015-03-16

Images obtained after lowering MESSENGER's altitude have revealed a population of small fault scarps (white arrows) that can be more than an order of magnitude smaller in size than their larger counterparts, like Enterprise Rupes. These small scarps are less than 10 km in length and have only tens of meters of relief. They are comparable in size and morphology to small fault scarps imaged on the Moon by the Lunar Reconnaissance Orbiter, suggesting that these small scarps are relatively young, and raising the possibility that some are even active today. http://photojournal.jpl.nasa.gov/catalog/PIA19245

Gulf Coast Disadvantaged Business Relief Act of 2011

THOMAS, 112th Congress

Sen. Landrieu, Mary L. [D-LA

2011-09-06

Senate - 09/06/2011 Read twice and referred to the Committee on Small Business and Entrepreneurship. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Business Paperwork Relief Act of 2009

THOMAS, 111th Congress

Sen. Vitter, David [R-LA

2009-05-21

Senate - 05/21/2009 Read twice and referred to the Committee on Homeland Security and Governmental Affairs. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Business Paperwork Relief Act of 2013

THOMAS, 113th Congress

Sen. Vitter, David [R-LA

2013-01-23

Senate - 01/23/2013 Read twice and referred to the Committee on Homeland Security and Governmental Affairs. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Business Paperwork Relief Act of 2011

THOMAS, 112th Congress

Rep. Boustany, Charles W., Jr. [R-LA-7

2011-05-05

House - 05/13/2011 Referred to the Subcommittee on Regulatory Affairs, Stimulus Oversight and Government Spending. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Airport Regulation Relief Act of 2014

THOMAS, 113th Congress

Sen. Enzi, Michael B. [R-WY

2014-09-17

Senate - 09/17/2014 Read twice and referred to the Committee on Commerce, Science, and Transportation. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Time-dependent effects of heat advection and topography on cooling histories during erosion

NASA Astrophysics Data System (ADS)

Mancktelow, Neil S.; Grasemann, Bernhard

1997-03-01

Both erosion and surface topography cause a time-dependent variation in isotherm geometry that can result in significant errors in estimating natural exhumation rates from geochronologic data. Analytical solutions and two-dimensional numerical modelling are used to investigate the magnitude of these inaccuracies for conditions appropriate to many rapidly exhumed mountain chains of rugged relief. It is readily demonstrated that uplift of the topographic surface has a negligible effect on the cooling history of an exhumed rock sample and cannot be quantified by current geochronologic methods. The topography itself perturbs the isotherms to a depth that depends on both the vertical and horizontal scale of the surface relief. Estimations employing different isotopic systems in the same sample with higher closure temperatures (> 200°C) are not generally influenced by topography. However, direct conversion of cooling rates to exhumation rates assuming a simple constant linear geotherm markedly underestimates peak rates, due to variation of the geothermal gradient in time and space and to the time lag between exhumation and cooling. Estimations based on the altitude variation in apatite fission-track ages are less prone to such inaccuracies in geothermal gradient but are affected by near-surface time-dependent variation in isotherm depth due to advection and topography. In tectonically active mountain belts, high exhumation rates are coupled with rugged topography, and exhumation rates may be markedly overestimated, by factors of 2 or more. Even at lower exhumation rates on the order of 1 mm/a, the shape of the cooling curve is modified by advection and topography. A convex-concave shape to the cooling curve does not necessarily imply a change of exhumation rate; it may also be attained by a more complicated geothermal gradient induced by topographic relief. Very fast cooling below 100°C, often interpreted as reflecting faster exhumation, can be more simply explained by the lateral cooling effect of topographic relief, with samples exhumed in valleys displaying a different near-surface cooling history to those on ridge crests.

The role of dynamic surface water-groundwater exchange on streambed denitrification in a first-order, low-relief agricultural watershed

NASA Astrophysics Data System (ADS)

Rahimi, Mina; Essaid, Hedeff I.; Wilson, John T.

2015-12-01

The role of temporally varying surface water-groundwater (SW-GW) exchange on nitrate removal by streambed denitrification was examined along a reach of Leary Weber Ditch (LWD), Indiana, a small, first-order, low-relief agricultural watershed within the Upper Mississippi River basin, using data collected in 2004 and 2005. Stream stage, GW heads (H), and temperatures (T) were continuously monitored in streambed piezometers and stream bank wells for two transects across LWD accompanied by synoptic measurements of stream stage, H, T, and nitrate (NO3) concentrations along the reach. The H and T data were used to develop and calibrate vertical two-dimensional, models of streambed water flow and heat transport across and along the axis of the stream. Model-estimated SW-GW exchange varied seasonally and in response to high-streamflow events due to dynamic interactions between SW stage and GW H. Comparison of 2004 and 2005 conditions showed that small changes in precipitation amount and intensity, evapotranspiration, and/or nearby GW levels within a low-relief watershed can readily impact SW-GW interactions. The calibrated LWD flow models and observed stream and streambed NO3 concentrations were used to predict temporal variations in streambed NO3 removal in response to dynamic SW-GW exchange. NO3 removal rates underwent slow seasonal changes, but also underwent rapid changes in response to high-flow events. These findings suggest that increased temporal variability of SW-GW exchange in low-order, low-relief watersheds may be a factor contributing their more efficient removal of NO3.

The role of dynamic surface water-groundwater exchange on streambed denitrification in a first-order, low-relief agricultural watershed

USGS Publications Warehouse

Rahimi Kazerooni, Mina N.; Essaid, Hedeff I.; Wilson, John T.

2015-01-01

The role of temporally varying surface water-groundwater (SW-GW) exchange on nitrate removal by streambed denitrification was examined along a reach of Leary Weber Ditch (LWD), Indiana, a small, first-order, low-relief agricultural watershed within the Upper Mississippi River basin, using data collected in 2004 and 2005. Stream stage, GW heads (H), and temperatures (T) were continuously monitored in streambed piezometers and stream bank wells for two transects across LWD accompanied by synoptic measurements of stream stage, H, T, and nitrate (NO3) concentrations along the reach. The H and T data were used to develop and calibrate vertical two-dimensional, models of streambed water flow and heat transport across and along the axis of the stream. Model-estimated SW-GW exchange varied seasonally and in response to high-streamflow events due to dynamic interactions between SW stage and GW H. Comparison of 2004 and 2005 conditions showed that small changes in precipitation amount and intensity, evapotranspiration, and/or nearby GW levels within a low-relief watershed can readily impact SW-GW interactions. The calibrated LWD flow models and observed stream and streambed NO3 concentrations were used to predict temporal variations in streambed NO3 removal in response to dynamic SW-GW exchange. NO3 removal rates underwent slow seasonal changes, but also underwent rapid changes in response to high-flow events. These findings suggest that increased temporal variability of SW-GW exchange in low-order, low-relief watersheds may be a factor contributing their more efficient removal of NO3.

12 CFR Appendix C to Part 225 - Small Bank Holding Company Policy Statement

Code of Federal Regulations, 2010 CFR

2010-01-01

... Department of the Treasury under the Troubled Asset Relief Program established by the Emergency Economic... current and proposed subsidiaries, including the recent trend and stability of earnings, past and...

Small Business Paperwork Relief Act of 2011

THOMAS, 112th Congress

Sen. Vitter, David [R-LA

2011-01-25

Senate - 07/20/2011 Committee on Homeland Security and Governmental Affairs. Hearings held. Hearings printed: S.Hrg. 112-220. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Company Job Growth and Regulatory Relief Act of 2011

THOMAS, 112th Congress

Rep. Fincher, Stephen Lee [R-TN-8

2011-10-14

House - 11/21/2011 Referred to the Subcommittee on Capital Markets and Government Sponsored Enterprises. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Business Paperwork Relief Act of 2013

THOMAS, 113th Congress

Rep. Duckworth, Tammy [D-IL-8

2013-03-21

House - 03/21/2013 Referred to the Committee on Oversight and Government Reform, and in addition to the Committee on Small Business, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Unconventional maar diatreme and associated intrusions in the soft sediment-hosted Mardoux structure (Gergovie, France)

NASA Astrophysics Data System (ADS)

Valentine, Greg A.; van Wyk de Vries, Benjamin

2014-03-01

A Miocene age volcanic-hypabyssal structure comprising volcaniclastic deposits and mafic intrusions is exposed with vertical relief of ˜110 m on the side of Gergovie Plateau (Auvergne, France). Three main volcaniclastic facies are: (1) Fluidal tuff breccia composed of juvenile basalt and sediment clasts with dominantly fluidal shapes, with several combinations of basalt and sediment within individual clasts. (2) Thickly bedded lapilli tuff composed of varying proportions of fine-grained sediment derived from Oligocene-Miocene lacustrine marls and mudstones and basaltic lapilli, blocks, and bombs. (3) Planar-bedded tuff forming thin beds of fine to coarse ash-size sedimentary material and basalt clasts. Intrusive bodies in the thickly bedded lapilli tuff range from irregularly shaped and anastomosing dikes and sills of meters to tens of meters in length, to a main feeder dike that is up to ˜20 m wide, and that flares into a spoon-shaped sill at ˜100 m in diameter and 10-20 m thick in the eastern part of the structure. Volcaniclastic deposits and structural features suggest that ascending magma entrained soft, saturated sediment host material into the feeder dike and erupted fluidal magma and wet sediment via weak, Strombolian-like explosions. Host sediment and erupted material subsided to replace the extracted sediments, producing the growth subsidence structure that is similar to upper diatreme facies in typical maar diatremes but lacks evidence for explosive disruption of diatreme fill. Irregularly shaped small intrusions extended from the main feeder dike into the diatreme, and many were disaggregated due to shifting and subsidence of diatreme fill and recycled via eruption. The Mardoux structure is an "unconventional" maar diatreme in that it was produced mainly by weak explosive activity rather than by violent phreatomagmatic explosions and is an example of complex coupling between soft sediment and ascending magma.

The effects of phase on the perception of 3D shape from texture: psychophysics and modeling.

PubMed

Thaler, Lore; Todd, James T; Dijkstra, Tjeerd M H

2007-02-01

Two experiments are reported in which observers judged the apparent shapes of elliptical cylinders with eight different textures that were presented with scrambled and unscrambled phase spectra. The results revealed that the apparent depths of these surfaces varied linearly with the ground truth in all conditions, and that the overall magnitude of surface relief was systematically underestimated. In general, the apparent depth of a surface is significantly attenuated when the phase spectrum of its texture is randomly scrambled, though the magnitude of this effect varies for different types of texture. A new computational model of 3D shape from texture is proposed in which apparent depth is estimated from the relative density of edges in different local regions of an image, and the predictions of this model are highly correlated with the observers' judgments.

Mobility monitoring in your community : interactive workshop.

DOT National Transportation Integrated Search

2010-01-01

For Lesson 4 interactive exercise, participants choose from one of three different maps to identify the : needs and opportunities based on community input. The three maps are medium-sized community, small : community with relief route, and smal...

America's Small Business Tax Relief Act of 2014

THOMAS, 113th Congress

Rep. Tiberi, Patrick J. [R-OH-12

2014-04-10

Senate - 06/17/2014 Read the second time. Placed on Senate Legislative Calendar under General Orders. Calendar No. 434. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation:

Hillslope Evolution by Bedrock Landslides

PubMed

Densmore; Anderson; McAdoo; Ellis

1997-01-17

Bedrock landsliding is a dominant geomorphic process in a number of high-relief landscapes, yet is neglected in landscape evolution models. A physical model of sliding in beans is presented, in which incremental lowering of one wall simulates baselevel fall and generates slides. Frequent small slides produce irregular hillslopes, on which steep toes and head scarps persist until being cleared by infrequent large slides. These steep segments are observed on hillslopes in high-relief landscapes and have been interpreted as evidence for increases in tectonic or climatic process rates. In certain cases, they may instead reflect normal hillslope evolution by landsliding.

Seismic reflection images of the accretionary wedge of Costa Rica

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shipley, T.H.; Stoffa, P.L.; McIntosh, K.

The large-scale structure of modern accretionary wedges is known almost entirely from seismic reflection investigations using single or grids of two-dimensional profiles. The authors will report on the first three-dimensional seismic reflection data volume collected of a wedge. This data set covers a 9-km-wide {times} 22-km-long {times} 6-km-thick volume of the accretionary wedge just arcward of the Middle America Trench off Costa Rica. The three-dimensional processing has improved the imaging ability of the multichannel data, and the data volume allows mapping of structures from a few hundred meters to kilometers in size. These data illustrate the relationships between the basement,more » the wedge shape, and overlying slope sedimentary deposits. Reflections from within the wedge define the gross structural features and tectonic processes active along this particular convergent margin. So far, the analysis shows that the subdued basement relief (horst and graben structures seldom have relief of more than a few hundred meters off Costa Rica) does affect the larger scale through going structural features within the wedge. The distribution of mud volcanoes and amplitude anomalies associated with the large-scale wedge structures suggests that efficient fluid migration paths may extend from the top of the downgoing slab at the shelf edge out into the lower and middle slope region at a distance of 50-100 km. Offscraping of the uppermost (about 45 m) sediment occurs within 4 km of the trench, creating a small pile of sediments near the trench lower slope. Underplating of parts of the 400-m-thick subducted sedimentary section begins at a very shallow structural level, 4-10 km arcward of the trench. Volumetrically, the most important accretionary process is underplating.« less

Changes of myoid and endothelial cells in the peritubular wall during contraction of the seminiferous tubule.

PubMed

Losinno, Antonella D; Sorrivas, Viviana; Ezquer, Marcelo; Ezquer, Fernando; López, Luis A; Morales, Alfonsina

2016-08-01

The wall of the seminiferous tubule in rodents consists of an inner layer of myoid cells covered by an outer layer of endothelial cells. Myoid cells are a type of smooth muscle cell containing α-actin filaments arranged in two independent layers that contract when stimulated by endothelin-1. The irregular surface relief of the tubular wall is often considered a hallmark of contraction induced by a variety of stimuli. We examine morphological changes of the rat seminiferous tubule wall during contraction by a combination of light, confocal, transmission and scanning electron microscopy. During ET-1-induced contraction, myoid cells changed from a flat to a conical shape, but their actin filaments remained in independent layers. As a consequence of myoid cell contraction, the basement membrane became wavy, orientation of collagen fibers in the extracellular matrix was altered and the endothelial cell layer became folded. To observe the basement of the myoid cell cone, the endothelial cell monolayer was removed by collagenase digestion prior to SEM study. In contracted tubules, it is possible to distinguish cell relief: myoid cells have large folds on the external surface oriented parallel to the tubular axis, whereas endothelial cells have numerous cytoplasmic projections facing the interstitium. The myoid cell cytoskeleton is unusual in that the actin filaments are arranged in two orthogonal layers, which adopt differing shapes during contraction with myoid cells becoming cone-shaped. This arrangement impacts on other components of the seminiferous tubule wall and affects the propulsion of the tubular contents to the rete testis.

Small Animal Massage Therapy: A Brief Review and Relevant Observations.

PubMed

Formenton, Maira Rezende; Pereira, Marco Aurélio Amador; Fantoni, Denise Tabacchi

2017-12-01

Massage therapy is becoming increasingly popular in human and animal physiotherapy and rehabilitation. Wider application of the technique led to research efforts aimed at providing scientific support to anecdotal beneficial effects, particularly pain relief. Recent studies have shown that massage therapy alters dopamine and serotonin levels, decreases noradrenaline levels, and modulates the immune system. Psychological effects such as reduction of stress and anxiety, with improvement of depressive patients, have been reported in humans. This article set out to review the major aspects of massage therapy based on recent publications on the topic, and to extrapolate concepts and practical aspects described in human physiotherapy to the veterinary patient, particularly the applicability of different techniques in Small Animal Medicine. Indications of massage therapy in small animals include pain relief, orthopedic rehabilitation, Canine Sports Medicine, intensive care, and management of nonspecific edema. Techniques described in this article were originally intended for use in humans and scientific data supporting anecdotal, beneficial effects in domestic animals are still lacking; this fruitful area for research is therefore open to veterinary professionals. Copyright © 2017 Elsevier Inc. All rights reserved.

Detachment-limited erosion, alluvial transport, and relief in decaying landscapes

NASA Astrophysics Data System (ADS)

Johnstone, S. A.; Hilley, G. E.

2013-12-01

The correspondence between relief and erosion rates in tectonically active orogens suggests that erosion rates and relief adjust relatively rapidly to changes in the rates of tectonic processes. This rapid landscape response is at odds with the preservation of ancient orogens for 10s to 100s of millions of years after orogenesis has ceased. We hypothesize that this hysteresis in response times to the acceleration versus deceleration of tectonic rates results from a geomorphic process transition in fluvial networks. In steep landscapes found in tectonically active environments erosion is largely controlled by detachment-limited incision, whereas the increasing importance of alluvial transport in decaying landscapes controls relief and response time-scales in these situations. We present results from one-dimensional (profile) numerical modeling of channels undergoing topographic decay from an initial steady state following a cessation in uplift to understand process transitions that may reconcile the large differences in response times implied by active versus ancient mountain-belts. We performed dimensional analysis on the governing equations such that relief in the channels, process transitions between alluvial transport and detachment-limited erosion, and response times could be viewed in terms of dimensionless numbers that capture the relative strength of sediment transport, bedrock incision, and the initial uplift rate. We found that the form of the decaying profile is dictated by the relative ability of a system to incise vs. transport sediment. When sediment transport is inefficient relative to bedrock incision, models suggest that relief decays in a manner that preserves the overall channel profile geometry as channel slopes decline. In contrast, when the ability of a system to transport sediment greatly exceeds its ability to incise bedrock, decay will be dominated by the consumption of topography by slope retreat. We find that the declivity of the surface along which slopes retreat is set by the sediment transport slope of the fluvial network. As slope retreat progresses, the fraction of area undergoing rapid erosion (and therefore the sediment flux) decreases, which causes a perpetual decline in the sediment transport slope itself. This is manifest as a headward migrating transition from areas dominated by slope retreat to slope decline. While this behavior occurs to some degree in all simulations undergoing slope retreat, it is only clearly observed when steady state alluvial transport slopes are comparable to, but smaller than, bedrock incision slopes. For a given length scale we find that the evolution of relief through time, measured as the fraction of initial relief preserved, is independent of dimensionless fluvial erosion and transport coefficients. High sediment transport slopes can act to limit the rate of decay of relief in landscapes evolving by slope retreat. However, because slope decline occupies only the downstream portion of drainage networks in these cases, the majority of the relief reduction is typically accomplished by slope retreat. These results highlight the importance of erosional process transitions in shaping the relief of decaying landscapes.

Small Business Investment Enhancement and Tax Relief Act

THOMAS, 113th Congress

Rep. Velazquez, Nydia M. [D-NY-12

2013-01-03

House - 01/03/2013 Referred to the Committee on Small Business, and in addition to the Committee on Ways and Means, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the committee concerned. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Back-barrier Topographic Control on the Morphology of Hurricane Harvey Washover Deposits

NASA Astrophysics Data System (ADS)

Wilson, K.; Swartz, J. M.; Mohrig, D. C.

2017-12-01

Hurricane Harvey rapidly intensified to a category 4 storm before making landfall on the Texas coast on August 25, 2017. Elevated water levels from storm surge and high waves produced widespread erosion, characterized by a landward shift of the shoreline and dune position in excess of 10 m, along greater than 200 km of the Texas coast. In areas of low relief along the pre-storm berm crest, washover fans were deposited. Using post-Harvey observations at Matagorda Peninsula and Sargent Beach, Texas, we investigate a variety of washover fan morphologies which ranged from thick (30 - 50 cm) fans with sharp landward terminations to thin (<10 cm) deposits with diffuse landward terminations. We suggest that the pre-storm back-barrier topography sets the thickness and length of washovers deposited landward of the pre-storm berm. We found subtle differences in back-barrier elevation that lead to distinct deposit styles: small local basins promote sediment accumulation, forming thick fan-shaped deposits while relatively flat topography results in thin, digitate washover morphology. Landward termination of these digitate forms are typically marked by small dams of detrital woody debris. The variability and relative prevalence between the observed morphologies have implications for the resilience of barrier islands over time. Localized, thick fan deposits could provide a more suitable foundation for reestablishment of vegetation and berm elevation, resulting in a more resilient shoreline.

Treatment of Nonunion of Scaphoid Waist with Ni-Ti Shape-Memory Alloy Connector and Iliac Bone Graft

NASA Astrophysics Data System (ADS)

Cao, Lie-Hu; Xu, Shuo-Gui; Wu, Ya-Le; Zhang, Chun-Cai

2011-07-01

After fracture, the unique anatomy and blood supply of the scaphoid itself predisposes to nonunion. Scaphoid nonunion presents a formidable challenge to surgeons because of the difficulties for fixation, and the high failure rate after treatment. The Ni-Ti shape-memory alloy can provide compressive stress at the nonunion site, which is the key point for bone healing. Hence, we designed a shape-memory bone connector named arched shape-memory connector (ASC). We conducted a retrospective study looking at the union rate and complications and correlating the outcome of treatment with this device. The study reviewed a cohort of six consecutive patients presenting with scaphoid waist nonunion, who were treated with ASC and iliac cancellous bone grafting at our center from August 2002 to December 2007. The patients with nonunion achieved a 100% union rate. All the patients who achieved union had good pain relief and improved function. Our study demonstrates that scaphoid waist nonunions can be successfully treated by ASC and iliac bone grafting.

An Approach to the Crustal Thickness Inversion Problem

NASA Astrophysics Data System (ADS)

De Marchi, F.; Di Achille, G.

2017-12-01

We describe a method to estimate the crustal thickness of a planet and we apply it to Venus. As in the method of (Parker, 1972), modified by (Wieczorek & Phillips, 1998), the gravity field anomalies of a planet are assumed to be due to the combined effect of topography and relief on the crust-mantle interface. No assumptions on isostasy are necessary. In our case, rather than using the expansion of the powers of the relief in Taylor series, we model the gravitational field of topography/relief by means of a large number of prism-shaped masses covering the whole surface of the planet. Under the hypothesis that crustal and mantle densities are the same everywhere, we solve for the relief depths on the crust-mantle interface by imposing that observed and modeled gravity field at a certain reference spherical surface (external to the planet) must be equal. This method can be extended to the case of non-uniform densities. Finally, we calculate a map of the crustal thickness of Venus and compare our results with those predicted by previous work and with the global distribution of main geological features (e.g. rift zones, tesserae, coronae). We discuss the agremeent between our results and the main geodynamical and crustal models put forth to explain the origin of such features and the applicability of this method in the context of the mission VOX (Venus Origins Explore), proposed for NASA's NF4 call.

Assessment of patient satisfaction with pain management in small community inpatient and outpatient settings.

PubMed

Corizzo, C C; Baker, M C; Henkelmann, G C

2000-09-01

To describe patient outcomes (e.g., pain intensity and relief, satisfaction, expectations) and analgesic practices of healthcare providers for inpatients and outpatients in community hospital settings. Descriptive, correlational, and random sampling. Three community-based institutions in southeast Louisiana. 114 inpatients and outpatients with cancer-related or acute postoperative pain. Inpatients (n = 68) mostly were women and younger than 60 years of age. Outpatients (n = 46) mostly were men and older than 60 years of age. Both groups were predominantly well-educated and Caucasian. Subjects completed a modified version of the American Pain Society's Patient Satisfaction Survey. Researchers completed a chart audit tool reviewing analgesic prescriptive and administrative practices. Weak to moderately strong correlations existed for the relationships between the satisfaction variables and the pain intensity, pain relief, and expectation variables for all subjects. Satisfaction with current pain intensity was correlated most strongly with pain intensity and relief scores. Higher pain intensity and relief were related to lower satisfaction with current pain intensity. Regardless of setting or pain type, subjects experienced significant amounts of pain during a 24-hour period. Patient expectations for experiencing high levels of pain were realized, but expectations for significant pain relief were not. Institutional pain management programs that approach pain from a multidimensional perspective need to be developed. Continued education for healthcare professionals and patients is a vital part of this process.

Central fabrication: Carved positive assessment

PubMed Central

Sanders, Joan E; Severance, Michael R; Myers, Timothy R; Ciol, Marcia A

2015-01-01

In this research we investigated the degree of error during the carving phase of central fabrication of prosthetic sockets for people with limb amputation. Three different model shapes were ordered from each of ten central fabrication companies. Using an accurate custom mechanical digitizer and alignment algorithm, we digitized the models and then compared the model shapes with the electronic file shapes. Results showed that 24 of the 30 models had volumes larger than the electronic file shapes while 24 had volumes that were smaller. 29 of the 30 models were oversized at the proximal aspect of the tibial tuberosity and undersized at the patellar tendon and popliteal areas. This error would result in a socket that had less tibial tubercle relief than intended in addition to a larger anterior-posterior dimension than desired. Comparison of the model shapes with socket shapes assessed for nine of the companies in a previous study showed that for five of the companies the sockets were relatively undersized over the tibial crest and fibular head. The results indicate that the socket the prosthetist receives will not always fit as planned, and that errors in the carving process are a source of the discrepancies. PMID:21515893

Transformation temperatures of martensite in beta phase nickel aluminide

NASA Technical Reports Server (NTRS)

Smialek, J. L.; Hehemann, R. F.

1972-01-01

Resistivity and thermal arrest measurements determined that the compositional dependence of Ms (martensite state) temperatures for NiAl martensite was linear between 60 and 69 atomic percent nickel, with Ms = 124 Ni - 7410 K. Resistivity and surface relief experiments indicated the presence of thermoelastic martensite for selected alloys. Some aspects of the transformation were studied by hot stage microscopy and related to the behavior observed for alloys exhibiting the shape-memory effect.

Transformation temperatures of martensite in beta-phase nickel aluminide.

NASA Technical Reports Server (NTRS)

Smialek, J. L.; Hehemann, R. F.

1973-01-01

Resistivity and thermal arrest measurements determined that the compositional dependence of M sub s temperatures for NiAl martensite was linear between 60 and 69 at. % Ni, with M sub s = (124 Ni - 7410)K. Resistivity and surface relief experiments for selected alloys indicated the presence of thermoelastic martensite. Some aspects of the transformation were studied by hot-stage microscopy and related to the behavior observed for alloys exhibiting the shape-memory effect.

Mitigating Climate Change with Earth Orbital Sunshades

NASA Technical Reports Server (NTRS)

Coverstone, Victoria; Johnson, Les

2015-01-01

An array of rotating sunshades based on emerging solar sail technology will be deployed in a novel Earth orbit to provide near-continuous partial shading of the Earth, reducing the heat input to the atmosphere by blocking a small percentage of the incoming sunlight, and mitigating local weather effects of anticipated climate change over the next century. The technology will provide local cooling relief during extreme heat events (and heating relief during extreme cold events) thereby saving human lives, agriculture, livestock, water and energy needs. A synthesis of the solar sail design, the sails' operational modes, and the selected orbit combine to provide local weather modification.

New Impetus for Several General Assistance Programs.

ERIC Educational Resources Information Center

Reeder, Rick

1999-01-01

Describes 1999 federal funding to large general-assistance programs affecting small towns and rural areas (including Housing and Urban Development, federal disaster relief, rural extension activities, and Bureau of Indian Affairs assistance programs); increased funding for Empowerment Zones/Enterprise Communities; reauthorization of the Economic…

Efficacy of Gastrografin® Compared with Standard Conservative Treatment in Management of Adhesive Small Bowel Obstruction at Mulago National Referral Hospital

PubMed Central

Haule, Caspar; Ongom, Peter A; Kimuli, Timothy

2013-01-01

Introduction The treatment of adhesive small bowel obstruction is controversial, with both operative and non-operative management practiced in different centers worldwide. Non-operative management is increasingly getting popular, though operative rates still remain high. A study to compare the efficacy of an oral water-soluble medium (Gastrografin®) with standard conservative management, both non-operative methods, in the management of this condition was conducted in a tertiary Sub Saharan hospital. Methods An open randomised controlled clinical trial was conducted between September 2012 and March 2013 at Mulago National Referral and Teaching Hospital, Uganda. Fifty patients of both genders, with adhesive small bowel obstruction, in the hospital’s emergency and general surgical wards were included. Randomisation was to Gastrografin® and standard conservative treatment groups. The primary outcomes were: the time interval between admission and relief of obstruction, the length of hospital stay, and the rates of operative surgery. Results All 50 recruited patients were followed up and analysed; 25 for each group. In the Gastrografin® group, 22 (88%) patients had relief of obstruction following the intervention, with 3 (12%) requiring surgery. The conservative treatment group had 16 (64%) patients relieved of obstruction conservatively, and 9 (36%) required surgery. The difference in operative rates between the two groups was not statistically significance (P = 0.67). Average time to relief of obstruction was shorter in the Gastrografin® group (72.52 hrs) compared to the conservative treatment group (117.75 hrs), a significant difference (P = 0.023). The average length of hospital stay was shorter in the Gastrografin® group (5.62 days) compared to the conservative treatment group (10.88 days), a significant difference (P = 0.04). Conclusion The use of Gastrografin® in patients with adhesive small bowel obstruction helps in earlier resolution of obstruction and reduces the length of hospital stay compared with standard conservative management. Its role in reducing the rate of laparotomies remains inconclusive. PMID:24729947

Efficacy of Gastrografin® Compared with Standard Conservative Treatment in Management of Adhesive Small Bowel Obstruction at Mulago National Referral Hospital.

PubMed

Haule, Caspar; Ongom, Peter A; Kimuli, Timothy

2013-12-01

The treatment of adhesive small bowel obstruction is controversial, with both operative and non-operative management practiced in different centers worldwide. Non-operative management is increasingly getting popular, though operative rates still remain high. A study to compare the efficacy of an oral water-soluble medium (Gastrografin ® ) with standard conservative management, both non-operative methods, in the management of this condition was conducted in a tertiary Sub Saharan hospital. An open randomised controlled clinical trial was conducted between September 2012 and March 2013 at Mulago National Referral and Teaching Hospital, Uganda. Fifty patients of both genders, with adhesive small bowel obstruction, in the hospital's emergency and general surgical wards were included. Randomisation was to Gastrografin ® and standard conservative treatment groups. The primary outcomes were: the time interval between admission and relief of obstruction, the length of hospital stay, and the rates of operative surgery. All 50 recruited patients were followed up and analysed; 25 for each group. In the Gastrografin ® group, 22 (88%) patients had relief of obstruction following the intervention, with 3 (12%) requiring surgery. The conservative treatment group had 16 (64%) patients relieved of obstruction conservatively, and 9 (36%) required surgery. The difference in operative rates between the two groups was not statistically significance ( P = 0.67 ). Average time to relief of obstruction was shorter in the Gastrografin ® group (72.52 hrs) compared to the conservative treatment group (117.75 hrs), a significant difference ( P = 0.023 ). The average length of hospital stay was shorter in the Gastrografin ® group (5.62 days) compared to the conservative treatment group (10.88 days), a significant difference ( P = 0.04 ). The use of Gastrografin ® in patients with adhesive small bowel obstruction helps in earlier resolution of obstruction and reduces the length of hospital stay compared with standard conservative management. Its role in reducing the rate of laparotomies remains inconclusive.

Schiaparelli Crater Rim and Interior Deposits

NASA Technical Reports Server (NTRS)

1998-01-01

A portion of the rim and interior of the large impact crater Schiaparelli is seen at different resolutions in images acquired October 18, 1997 by the Mars Global Surveyor Orbiter Camera (MOC) and by the Viking Orbiter 1 twenty years earlier. The left image is a MOC wide angle camera 'context' image showing much of the eastern portion of the crater at roughly 1 km (0.6 mi) per picture element. The image is about 390 by 730 km (240 X 450 miles). Shown within the wide angle image is the outline of a portion of the best Viking image (center, 371S53), acquired at a resolution of about 240 m/pixel (790 feet). The area covered is 144 X 144 km (89 X 89 miles). The right image is the high resolution narrow angle camera view. The area covered is very small--3.9 X 10.2 km (2.4 X 6.33 mi)--but is seen at 63 times higher resolution than the Viking image. The subdued relief and bright surface are attributed to blanketing by dust; many small craters have been completely filled in, and only the most recent (and very small) craters appear sharp and bowl-shaped. Some of the small craters are only 10-12 m (30-35 feet) across. Occasional dark streaks on steeper slopes are small debris slides that have probably occurred in the past few decades. The two prominent, narrow ridges in the center of the image may be related to the adjustment of the crater floor to age or the weight of the material filling the basin.

Malin Space Science Systems (MSSS) and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.

LCD real-time mask technique for fabrication of arbitrarily shaped microstructure

NASA Astrophysics Data System (ADS)

Peng, Qinjun; Guo, Yongkang; Chen, Bo; Du, Jinglei; Xiang, Jinshan; Cui, Zheng

2002-04-01

A new technique to fabricate arbitrarily shaped microstructures by using LCD (liquid crystal display) real- time mask is reported in this paper. Its principle and design method are explained. Based on partial coherent imaging theory, the process to fabricate micro-axicon array and zigzag grating has been simulated. The experiment using a color LCD as real-time mask has been set up. Micro-axicon array and zigzag grating has been fabricated by the LCD real-time mask technique. The 3D surface relief structures were made on pan chromatic silver-halide sensitized gelatin (Kodak-131) with trypsinase etching. The pitch size of zigzag grating is 46.26micrometers . The caliber of axicon is 118.7micrometers , and the etching depth is 1.332micrometers .

Cold spraying of aluminum bronze on profiled submillimeter cermet structures formed by laser cladding

NASA Astrophysics Data System (ADS)

Ryashin, N. S.; Malikov, A. G.; Shikalov, V. S.; Gulyaev, I. P.; Kuchumov, B. M.; Klinkov, S. V.; Kosarev, V. F.; Orishich, A. M.

2017-10-01

The paper presents results of the cold spraying of aluminum bronze coatings on substrates profiled with WC/Ni tracks obtained by laser cladding. Reinforcing cermet frames shaped as grids with varied mesh sizes were clad on stainless steel substrates using a CO2 laser machine "Siberia" (ITAM SB RAS, Russia). As a result, surfaces/substrates with heterogeneous shape, composition, and mechanical properties were obtained. Aluminum bronze coatings were deposited from 5lF-NS powder (Oerlikon Metco, Switzerland) on those substrates using cold spraying equipment (ITAM SB RAS). Data of profiling, microstructure diagnostics, EDS analysis, and mechanical tests of obtained composites is reported. Surface relief of the sprayed coatings dependence on substrate structure has been demonstrated.

Efficacy of a benzocaine lozenge in the treatment of uncomplicated sore throat.

PubMed

Chrubasik, Sigrun; Beime, Beate; Magora, Florella

2012-02-01

Benzocaine lozenges are popular in symptomatic treatment of acute sore throat. The aim of this study was to evaluate if sucking a benzocaine lozenge was superior to a placebo lozenge in patients with pain while swallowing. Volunteers with acute, uncomplicated sore throat received randomly and double-blind either a benzocaine 8 mg or a placebo lozenge. Pain was assessed on a numerical visual rating scale. The primary outcome measure was the sum of the pain intensity differences (SPID) over 2 h. Secondary outcome measures included the number of patients who reported 50% or more of their baseline pain score (responders) and those with worthwhile and complete pain relief, the times to worthwhile/complete pain relief and to pain recurrence and the occurrence of any adverse effects. A predefined interim analysis after including 50 patients revealed the superiority of benzocaine versus placebo in the SPID (p = 0.0086). At this time, a total of 165 patients had been recruited (full analysis set, FAS) and underwent statistical analysis. In the FAS, median SPID had significantly more decreased in patients receiving benzocaine compared to placebo (-12 vs. - 5, p = 0.001). There were significantly more responders and patients with worthwhile pain relief in group benzocaine. The number of patients with complete pain relief was very small. Median time to worthwhile pain relief was 20 min (benzocaine) and >45 min (placebo). Adverse events were not observed. Benzocaine lozenges are superior to placebo lozenges and a useful, well-tolerated treatment option to reduce painful pharyngeal discomfort.

A bill to amend the Consumer Product Safety Act to provide regulatory relief to small and family-owned businesses.

THOMAS, 111th Congress

Sen. DeMint, Jim [R-SC

2009-02-04

Senate - 02/04/2009 Read twice and referred to the Committee on Commerce, Science, and Transportation. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Business Tax Relief Act of 2010

THOMAS, 111th Congress

Rep. Levin, Sander M. [D-MI-12

2010-07-30

House - 07/30/2010 On motion to suspend the rules and pass the bill Failed by the Yeas and Nays: (2/3 required): 241 - 154 (Roll no. 514). (All Actions) Tracker: This bill has the status Failed HouseHere are the steps for Status of Legislation:

Thermal and fluid-dynamics behavior of circulating systems in the case of pressure relief

NASA Astrophysics Data System (ADS)

Moeller, L.

Aspects of safety in the case of large-scale installations with operational high-pressure conditions must be an important consideration already during the design of such installations, taking into account all conceivable disturbances. Within an analysis of such disturbances, studies related to pressure relief processes will have to occupy a central position. For such studies, it is convenient to combine experiments involving small-scale models of the actual installation with suitable computational programs. The experiments can be carried out at lower pressures and temperatures if the actual fluid is replaced by another medium, such as, for instance, a refrigerant. This approach has been used in the present investigation. The obtained experimental data are employed as a basis for a verification of the results provided by the computational model 'Frelap-UK' which has been expressly developed for the analysis of system behavior in the case of pressure relief. It is found that the computer fluid-dynamics characteristics agree with the experimental results.

Medical relief for the 2011 Japan earthquake: a nursing account.

PubMed

Mitani, Satoko; Kako, Mayumi; Mayner, Lidia

2014-03-01

In 2011 the east coast of Japan experienced a massive earthquake which triggered a devastating tsunami destroying many towns and killing over 15 000 people. The work presented in this paper is a personal account that outlines the relief efforts of the Humanitarian Medical Assistance team and describes the efforts to provide medical assistance to evacuees. The towns most affected had a large proportion of older people who were more likely to have chronic conditions and required medication to sustain their health. Since personal property was destroyed in the tsunami many older people were left without medication and also did not remember which type of medication they were taking. Some evacuees had brought a list of their medication with them, this assisted relief teams in obtaining the required medication for these people. The more successful evacuation centers had small numbers of evacuees who were given tasks to administer the center that kept them occupied and active. © 2013 Wiley Publishing Asia Pty Ltd.

Robust functional statistics applied to Probability Density Function shape screening of sEMG data.

PubMed

Boudaoud, S; Rix, H; Al Harrach, M; Marin, F

2014-01-01

Recent studies pointed out possible shape modifications of the Probability Density Function (PDF) of surface electromyographical (sEMG) data according to several contexts like fatigue and muscle force increase. Following this idea, criteria have been proposed to monitor these shape modifications mainly using High Order Statistics (HOS) parameters like skewness and kurtosis. In experimental conditions, these parameters are confronted with small sample size in the estimation process. This small sample size induces errors in the estimated HOS parameters restraining real-time and precise sEMG PDF shape monitoring. Recently, a functional formalism, the Core Shape Model (CSM), has been used to analyse shape modifications of PDF curves. In this work, taking inspiration from CSM method, robust functional statistics are proposed to emulate both skewness and kurtosis behaviors. These functional statistics combine both kernel density estimation and PDF shape distances to evaluate shape modifications even in presence of small sample size. Then, the proposed statistics are tested, using Monte Carlo simulations, on both normal and Log-normal PDFs that mimic observed sEMG PDF shape behavior during muscle contraction. According to the obtained results, the functional statistics seem to be more robust than HOS parameters to small sample size effect and more accurate in sEMG PDF shape screening applications.

Auto-Origami and Soft Programmable Transformers: Simulation Studies of Liquid Crystal Elastomers and Swelling Polymer Gels

NASA Astrophysics Data System (ADS)

Konya, Andrew; Santangelo, Christian; Selinger, Robin

2014-03-01

When the underlying microstructure of an actuatable material varies in space, simple sheets can transform into complex shapes. Using nonlinear finite element elastodynamic simulations, we explore the design space of two such materials: liquid crystal elastomers and swelling polymer gels. Liquid crystal elastomers (LCE) undergo shape transformations induced by stimuli such as heating/cooling or illumination; complex deformations may be programmed by ``blueprinting'' a non-uniform director field in the sample when the polymer is cross-linked. Similarly, swellable gels can undergo shape change when they are swollen anisotropically as programmed by recently developed halftone gel lithography techniques. For each of these materials we design and test programmable motifs which give rise to complex deformation trajectories including folded structures, soft swimmers, apertures that open and close, bas relief patterns, and other shape transformations inspired by art and nature. In order to accommodate the large computational needs required to model these materials, our 3-d nonlinear finite element elastodynamics simulation algorithm is implemented in CUDA, running on a single GPU-enabled workstation.

Small Business Penalty Relief Act of 2009

THOMAS, 111th Congress

Sen. Baucus, Max [D-MT

2009-11-16

Senate - 11/16/2009 Read twice and referred to the Committee on Finance. (All Actions) Notes: For further action, see H.R.5297, which became Public Law 111-240 on 9/27/2010. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Business Penalty Relief Act of 2009

THOMAS, 111th Congress

Rep. Lewis, John [D-GA-5

2009-11-16

House - 11/16/2009 Referred to the House Committee on Ways and Means. (All Actions) Notes: For further action, see H.R.5297, which became Public Law 111-240 on 9/27/2010. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Small Business Tax Relief Act of 2011

THOMAS, 112th Congress

Rep. Owens, William L. [D-NY-23

2011-01-25

House - 01/25/2011 Referred to the House Committee on Ways and Means. (All Actions) Notes: For further action, see H.R.4, which became Public Law 112-9 on 4/14/2011. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

38 CFR 74.27 - How will VA store information?

Code of Federal Regulations, 2012 CFR

2012-07-01

... information? 74.27 Section 74.27 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS REGULATIONS Records Management § 74.27 How will VA store information? VA intends to store records provided to complete the VetBiz Vendor Information Pages registration fully...

38 CFR 74.27 - How will VA store information?

Code of Federal Regulations, 2011 CFR

2011-07-01

... information? 74.27 Section 74.27 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS REGULATIONS Records Management § 74.27 How will VA store information? VA intends to store records provided to complete the VetBiz Vendor Information Pages registration fully...

38 CFR 74.27 - How will VA store information?

Code of Federal Regulations, 2013 CFR

2013-07-01

... information? 74.27 Section 74.27 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS REGULATIONS Records Management § 74.27 How will VA store information? VA intends to store records provided to complete the VetBiz Vendor Information Pages registration fully...

38 CFR 74.27 - How will VA store information?

Code of Federal Regulations, 2014 CFR

2014-07-01

... information? 74.27 Section 74.27 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS REGULATIONS Records Management § 74.27 How will VA store information? VA intends to store records provided to complete the VetBiz Vendor Information Pages registration fully...

A modular tooling set-up for incremental sheet forming (ISF) with subsequent stress-relief annealing under partial constraints

NASA Astrophysics Data System (ADS)

Maqbool, Fawad; Bambach, Markus

2017-10-01

Incremental sheet forming (ISF) is a manufacturing process most suitable for small-batch production of sheet metal parts. In ISF, a CNC-controlled tool moves over the sheet metal, following a specified contour to form a part of the desired geometry. This study focuses on one of the dominant process limitations associated with the ISF, i.e., the limited geometrical accuracy. In this regard, a case study is performed which shows that increased geometrical accuracy of the formed part can be achieved by a using stress-relief annealing before unclamping. To keep the tooling costs low, a modular die design consisting of a stiff metal frame and inserts made from inexpensive plastics (Sika®) were devised. After forming, the plastics inserts are removed. The metal frame supports the part during stress-relief annealing. Finite Element (FE) simulations of the manufacturing process are performed. Due to the residual stresses induced during the forming, the geometry of the formed part, from FE simulation and the actual manufacturing process, shows severe distortion upon unclamping the part. Stress relief annealing of the formed part under partial constraints exerted by the tool frame shows that a part with high geometrical accuracy can be obtained.

A method for remote sounding of a bottom relief of water objects with using GPS

NASA Astrophysics Data System (ADS)

Mamontova, L. S.

2014-12-01

The no-fly automated system of small rivers' depth's measurement which is based on a combination of a differential method GPS-definition of the pro-measured vessel's coordinates both the method of depth's measurement with sonic depth finder and the method of the vessel's management was examined in this article.On the central station the digital card with a relief for a pro-measured zone of the reservoir is formed and the position of a pro-measured vessel on the tacks is controlled thanks to the coordinates of a pro-measured vessel and depth's measurements with sonic depth finder.The offered system allows to raise the level of depth's pro-measured works.

Can small island mountains provide relief from the Subtropical Precipitation Decline? Simulating future precipitation regimes for small island nations using high resolution Regional Climate Models.

NASA Astrophysics Data System (ADS)

Bowden, J.; Terando, A. J.; Misra, V.; Wootten, A.

2017-12-01

Small island nations are vulnerable to changes in the hydrologic cycle because of their limited water resources. This risk to water security is likely even higher in sub-tropical regions where anthropogenic forcing of the climate system is expected to lead to a drier future (the so-called `dry-get-drier' pattern). However, high-resolution numerical modeling experiments have also shown an enhancement of existing orographically-influenced precipitation patterns on islands with steep topography, potentially mitigating subtropical drying on windward mountain sides. Here we explore the robustness of the near-term (25-45 years) subtropical precipitation decline (SPD) across two island groupings in the Caribbean, Puerto Rico and the U.S. Virgin Islands. These islands, forming the boundary between the Greater and Lesser Antilles, significantly differ in size, topographic relief, and orientation to prevailing winds. Two 2-km horizontal resolution regional climate model simulations are used to downscale a total of three different GCMs under the RCP8.5 emissions scenario. Results indicate some possibility for modest increases in precipitation at the leading edge of the Luquillo Mountains in Puerto Rico, but consistent declines elsewhere. We conclude with a discussion of potential explanations for these patterns and the attendant risks to water security that subtropical small island nations could face as the climate warms.

Body shape convergence driven by small size optimum in marine angelfishes.

PubMed

Frédérich, Bruno; Santini, Francesco; Konow, Nicolai; Schnitzler, Joseph; Lecchini, David; Alfaro, Michael E

2017-06-01

Convergent evolution of small body size occurs across many vertebrate clades and may reflect an evolutionary response to shared selective pressures. However it remains unclear if other aspects of phenotype undergo convergent evolution in miniaturized lineages. Here we present a comparative analysis of body size and shape evolution in marine angelfishes (Pomacanthidae), a reef fish family characterized by repeated transitions to small body size. We ask if lineages that evolve small sizes show convergent evolution in body shape. Our results reveal that angelfish lineages evolved three different stable size optima with one corresponding to the group of pygmy angelfishes ( Centropyge ). Then, we test if the observed shifts in body size are associated with changes to new adaptive peaks in shape. Our data suggest that independent evolution to small size optima have induced repeated convergence upon deeper body and steeper head profile in Centropyge These traits may favour manoeuvrability and visual awareness in these cryptic species living among corals, illustrating that functional demands on small size may be related to habitat specialization and predator avoidance. The absence of shape convergence in large marine angelfishes also suggests that more severe requirements exist for small than for large size optima. © 2017 The Author(s).

Measuring (subglacial) bedform orientation, length, and longitudinal asymmetry - Method assessment.

PubMed

Jorge, Marco G; Brennand, Tracy A

2017-01-01

Geospatial analysis software provides a range of tools that can be used to measure landform morphometry. Often, a metric can be computed with different techniques that may give different results. This study is an assessment of 5 different methods for measuring longitudinal, or streamlined, subglacial bedform morphometry: orientation, length and longitudinal asymmetry, all of which require defining a longitudinal axis. The methods use the standard deviational ellipse (not previously applied in this context), the longest straight line fitting inside the bedform footprint (2 approaches), the minimum-size footprint-bounding rectangle, and Euler's approximation. We assess how well these methods replicate morphometric data derived from a manually mapped (visually interpreted) longitudinal axis, which, though subjective, is the most typically used reference. A dataset of 100 subglacial bedforms covering the size and shape range of those in the Puget Lowland, Washington, USA is used. For bedforms with elongation > 5, deviations from the reference values are negligible for all methods but Euler's approximation (length). For bedforms with elongation < 5, most methods had small mean absolute error (MAE) and median absolute deviation (MAD) for all morphometrics and thus can be confidently used to characterize the central tendencies of their distributions. However, some methods are better than others. The least precise methods are the ones based on the longest straight line and Euler's approximation; using these for statistical dispersion analysis is discouraged. Because the standard deviational ellipse method is relatively shape invariant and closely replicates the reference values, it is the recommended method. Speculatively, this study may also apply to negative-relief, and fluvial and aeolian bedforms.

Towards spectral geometric methods for Euclidean quantum gravity

NASA Astrophysics Data System (ADS)

Panine, Mikhail; Kempf, Achim

2016-04-01

The unification of general relativity with quantum theory will also require a coming together of the two quite different mathematical languages of general relativity and quantum theory, i.e., of differential geometry and functional analysis, respectively. Of particular interest in this regard is the field of spectral geometry, which studies to which extent the shape of a Riemannian manifold is describable in terms of the spectra of differential operators defined on the manifold. Spectral geometry is hard because it is highly nonlinear, but linearized spectral geometry, i.e., the task to determine small shape changes from small spectral changes, is much more tractable and may be iterated to approximate the full problem. Here, we generalize this approach, allowing, in particular, nonequal finite numbers of shape and spectral degrees of freedom. This allows us to study how well the shape degrees of freedom are encoded in the eigenvalues. We apply this strategy numerically to a class of planar domains and find that the reconstruction of small shape changes from small spectral changes is possible if enough eigenvalues are used. While isospectral nonisometric shapes are known to exist, we find evidence that generically shaped isospectral nonisometric shapes, if existing, are exceedingly rare.

Water resources of the Redwood River watershed, southwestern Minnesota

USGS Publications Warehouse

Van Voast, Wayne A.; Jerabek, L.A.; Novitzki, R.P.

1970-01-01

The land surface slopes gently northeastward and eastward from altitudes greater than 1900 feet at the southwestern edge to less than 850 feet at the mouth of the Redwood River in the east. The area has slight local relief shaped by continental glaciation. The Redwood River and its tributaries, many of which are ephemeral, and ponds and lakes in the area provide water for local use and habitat for wildlife. The glacial drift and sedimentary rocks yield generally adequate water supplies for municipalities, households, and farms.

Wounds caused by contact with muzzle-lift relief ports (Mag-Na-Port).

PubMed

Rogers, D R; Shem, R J

1992-12-01

Fan-shaped stippled burns were produced on the skin when a revolver whose barrel had been modified by the Mag-Na-Port process was fired twice with the side of the muzzle in contact. A grazing wound was produced by one bullet, and an oblique entry was produced by the other. The characteristics of Mag-Na-Port wounds and test shots are described, and these are compared with test shots from two other higher power revolvers.

Pocket ECG electrode

NASA Technical Reports Server (NTRS)

Lund, Gordon F. (Inventor)

1982-01-01

A low-noise electrode suited for sensing electrocardiograms when chronically and subcutaneously implanted in a free-ranging subject. The electrode comprises a pocket-shaped electrically conductive member with a single entrance adapted to receive body fluids. The exterior of the member and the entrance region is coated with electrical insulation so that the only electrolyte/electrode interface is within the member remote from artifact-generating tissue. Cloth straps are bonded to the member to permit the electrode to be sutured to tissue and to provide electrical lead flexure relief.

Pocket ECG electrode

NASA Technical Reports Server (NTRS)

Lund, G. F. (Inventor)

1980-01-01

A low noise electrode suited for sensing electrocardiograms when chronically and subcutaneously implanted in a free ranging subject is described. The electrode comprises a pocket shaped electrically conductive member with a single entrance adapted to receive body fluids. The exterior of the member and the entrance region is coated with electrical insulation so that the only electrolyte/electrode interface is within the member, remote from artifact-generating tissue. Cloth straps are bonded to the member to permit the electrode to be sutured to tissue and to provide electrical lead flexure relief.

77 FR 7143 - Agency Information Collection Activities; Proposed Collection; Comment Request; EPA ICR No. 2104.04

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... . FOR FURTHER INFORMATION CONTACT: Rachel Lentz, Office of Brownfields and Land Revitalization, (5105T... Village Corporations, and Metlakatla Indian Communities; and non-profit organizations. Title: Brownfields... regulations is consolidated in 40 CFR part 9. Abstract: The Small Business Liability Relief and Brownfields...

77 FR 58755 - Small Business Size Standards: Health Care and Social Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... Vocational Rehabilitation Services... 7.0 10.0 For the reasons as stated above in this rule and in the... businesses because of a price evaluation preference. The additional costs associated with fewer bidders... Emergency and Other Relief Services.. 30.0 624310 Vocational Rehabilitation Services... 10.0...

21 CFR 524.981b - Fluocinolone acetonide solution.

Code of Federal Regulations, 2010 CFR

2010-04-01

... inflammation associated with otitis externa and certain superficial acute and chronic dermatoses in the dog. It is also indicated for the relief of pruritus and inflammation associated with acute otitis externa and certain superficial acute and chronic dermatoses in the cat. (2) A small amount of solution is...

21 CFR 524.981b - Fluocinolone acetonide solution.

Code of Federal Regulations, 2012 CFR

2012-04-01

... inflammation associated with otitis externa and certain superficial acute and chronic dermatoses in the dog. It is also indicated for the relief of pruritus and inflammation associated with acute otitis externa and certain superficial acute and chronic dermatoses in the cat. (2) A small amount of solution is...

21 CFR 524.981b - Fluocinolone acetonide solution.

Code of Federal Regulations, 2011 CFR

2011-04-01

... inflammation associated with otitis externa and certain superficial acute and chronic dermatoses in the dog. It is also indicated for the relief of pruritus and inflammation associated with acute otitis externa and certain superficial acute and chronic dermatoses in the cat. (2) A small amount of solution is...

21 CFR 524.981b - Fluocinolone acetonide solution.

Code of Federal Regulations, 2013 CFR

2013-04-01

... inflammation associated with otitis externa and certain superficial acute and chronic dermatoses in the dog. It is also indicated for the relief of pruritus and inflammation associated with acute otitis externa and certain superficial acute and chronic dermatoses in the cat. (2) A small amount of solution is...

38 CFR 74.25 - What types of personally identifiable information will VA collect?

Code of Federal Regulations, 2010 CFR

2010-07-01

... DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS REGULATIONS Records Management § 74.25 What types of personally identifiable information will VA collect? In order to establish owner... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false What types of personally...

Nasal hydropulsion.

PubMed

Elizabeth, Ashbaugh

2013-08-01

Intranasal tumors of dogs and cats pose a diagnostic and therapeutic challenge for the small animal practitioner. A simplified flushing technique to biopsy and debulk nasal tumors, that often results in immediate clinical relief for the patient is described. This technique can also be utilized to remove nasal foreign bodies. © 2013 Elsevier Inc. All rights reserved.

Conservation of pancreatic tissue by combined gastric, biliary, and pancreatic duct drainage for pain from chronic pancreatitis.

PubMed

Warshaw, A L

1985-04-01

In patients with chronic pancreatitis, the sclerosing process of the pancreas may constrict not only the pancreatic duct for also the bile duct and duodenum. This study analyzes the prevalence of these obstructive lesions in 58 consecutive patients with chronic pancreatitis requiring surgery for either pain (57 patients) or for painless jaundice (1 patient). There was significant biliary obstruction in 21, 4 of whom also had symptomatic duodenal obstruction. All 21 patients with biliary and duodenal obstruction were among the 38 with a dilated pancreatic duct suitable for pancreaticojejunostomy (modified Puestow procedure). None of the 20 patients with small duct pancreatitis had biliary or duodenal obstruction. Pseudocysts were distributed evenly between the two groups (9 of 38 patients with a dilated duct versus 4 of 20 patients with small duct pancreatitis). Pancreaticojejunostomy combined with choledochoenterostomy and gastrojejunostomy in appropriately selected patients provided good to excellent long-term (mean 3.6 years) relief of pain in 30 of 36 patients (83 percent). There was no correlation between successful relief of pain and development of pancreatic exocrine or endocrine insufficiency or calcification. Stenosis of the bile duct developed some years subsequent to pancreaticojejunostomy in four patients and required a second operation for choledochoenterostomy in three. Three other patients required secondary pancreatic resections due to failure of the pancreaticojejunostomy to relieve pain. It is often possible to effect excellent relief of symptoms with maximal conservation of remaining pancreatic functions despite sclerotic obstruction of multiple organ systems.

Dynamics of the small-scale changes of metal optic surfaces induced by pulsed light

NASA Astrophysics Data System (ADS)

Liukonen, R. A.; Trofimenko, A. M.

1991-10-01

A study is made of small-scale changes in the relief and absorptivity of mirror metal surfaces due to interaction with pulsed infrared irradiation. Several singularities are identified which are associated with the pulsed nature of the interaction and which cannot be explained by the surface temperature change alone. These include small-scale deformations observed even in the case of uniform distribution of the incident radiation intensity; an increase in deformation in excess of the increase attributable to heating only; and a change in the absorptivity of metal mirrors in excess of the theoretically predicted value.

The use of waveform shapes to automatically determine earthquake focal depth

USGS Publications Warehouse

Sipkin, S.A.

2000-01-01

Earthquake focal depth is an important parameter for rapidly determining probable damage caused by a large earthquake. In addition, it is significant both for discriminating between natural events and explosions and for discriminating between tsunamigenic and nontsunamigenic earthquakes. For the purpose of notifying emergency management and disaster relief organizations as well as issuing tsunami warnings, potential time delays in determining source parameters are particularly detrimental. We present a method for determining earthquake focal depth that is well suited for implementation in an automated system that utilizes the wealth of broadband teleseismic data that is now available in real time from the global seismograph networks. This method uses waveform shapes to determine focal depth and is demonstrated to be valid for events with magnitudes as low as approximately 5.5.

Size and shape of Saturn's moon Titan.

PubMed

Zebker, Howard A; Stiles, Bryan; Hensley, Scott; Lorenz, Ralph; Kirk, Randolph L; Lunine, Jonathan

2009-05-15

Cassini observations show that Saturn's moon Titan is slightly oblate. A fourth-order spherical harmonic expansion yields north polar, south polar, and mean equatorial radii of 2574.32 +/- 0.05 kilometers (km), 2574.36 +/- 0.03 km, and 2574.91 +/- 0.11 km, respectively; its mean radius is 2574.73 +/- 0.09 km. Titan's shape approximates a hydrostatic, synchronously rotating triaxial ellipsoid but is best fit by such a body orbiting closer to Saturn than Titan presently does. Titan's lack of high relief implies that most--but not all--of the surface features observed with the Cassini imaging subsystem and synthetic aperture radar are uncorrelated with topography and elevation. Titan's depressed polar radii suggest that a constant geopotential hydrocarbon table could explain the confinement of the hydrocarbon lakes to high latitudes.

Size and shape of Saturn's moon Titan

USGS Publications Warehouse

Zebker, Howard A.; Stiles, Bryan; Hensley, Scott; Lorenz, Ralph; Kirk, Randolph L.; Lunine, Jonathan

2009-01-01

Cassini observations show that Saturn's moon Titan is slightly oblate. A fourth-order spherical harmonic expansion yields north polar, south polar, and mean equatorial radii of 2574.32 ± 0.05 kilometers (km), 2574.36 ± 0.03 km, and 2574.91 ± 0.11 km, respectively; its mean radius is 2574.73 ± 0.09 km. Titan's shape approximates a hydrostatic, synchronously rotating triaxial ellipsoid but is best fit by such a body orbiting closer to Saturn than Titan presently does. Titan's lack of high relief implies that most—but not all—of the surface features observed with the Cassini imaging subsystem and synthetic aperture radar are uncorrelated with topography and elevation. Titan's depressed polar radii suggest that a constant geopotential hydrocarbon table could explain the confinement of the hydrocarbon lakes to high latitudes.

Experimental simulation of impact cratering on icy satellites

NASA Technical Reports Server (NTRS)

Greeley, R.; Fink, J. H.; Gault, D. E.; Guest, J. E.

1982-01-01

Cratering processes on icy satellites were simulated in a series of 102 laboratory impact experiments involving a wide range of target materials. For impacts into homogeneous clay slurries with impact energies ranging from five million to ten billion ergs, target yield strengths ranged from 100 to 38 Pa, and apparent viscosities ranged from 8 to 200 Pa s. Bowl-shaped craters, flat-floored craters, central peak craters with high or little relief, and craters with no relief were observed. Crater diameters increased steadily as energies were raised. A similar sequence was seen for experiment in which impact energy was held constant but target viscosity and strength progressively decreases. The experiments suggest that the physical properties of the target media relative to the gravitationally induced stresses determined the final crater morphology. Crater palimpsests could form by prompt collapse of large central peak craters formed in low target strength materials. Ages estimated from crater size-frequency distributions that include these large craters may give values that are too high.

Advanced Ring-Shaped Microelectrode Assay Combined with Small Rectangular Electrode for Quasi-In vivo Measurement of Cell-to-Cell Conductance in Cardiomyocyte Network

NASA Astrophysics Data System (ADS)

Nomura, Fumimasa; Kaneko, Tomoyuki; Hamada, Tomoyo; Hattori, Akihiro; Yasuda, Kenji

2013-06-01

To predict the risk of fatal arrhythmia induced by cardiotoxicity in the highly complex human heart system, we have developed a novel quasi-in vivo electrophysiological measurement assay, which combines a ring-shaped human cardiomyocyte network and a set of two electrodes that form a large single ring-shaped electrode for the direct measurement of irregular cell-to-cell conductance occurrence in a cardiomyocyte network, and a small rectangular microelectrode for forced pacing of cardiomyocyte beating and for acquiring the field potential waveforms of cardiomyocytes. The advantages of this assay are as follows. The electrophysiological signals of cardiomyocytes in the ring-shaped network are superimposed directly on a single loop-shaped electrode, in which the information of asynchronous behavior of cell-to-cell conductance are included, without requiring a set of huge numbers of microelectrode arrays, a set of fast data conversion circuits, or a complex analysis in a computer. Another advantage is that the small rectangular electrode can control the position and timing of forced beating in a ring-shaped human induced pluripotent stem cell (hiPS)-derived cardiomyocyte network and can also acquire the field potentials of cardiomyocytes. First, we constructed the human iPS-derived cardiomyocyte ring-shaped network on the set of two electrodes, and acquired the field potential signals of particular cardiomyocytes in the ring-shaped cardiomyocyte network during simultaneous acquisition of the superimposed signals of whole-cardiomyocyte networks representing cell-to-cell conduction. Using the small rectangular electrode, we have also evaluated the response of the cell network to electrical stimulation. The mean and SD of the minimum stimulation voltage required for pacing (VMin) at the small rectangular electrode was 166+/-74 mV, which is the same as the magnitude of amplitude for the pacing using the ring-shaped electrode (179+/-33 mV). The results showed that the addition of a small rectangular electrode into the ring-shaped electrode was effective for the simultaneous measurement of whole-cell-network signals and single-cell/small-cluster signals on a local site in the cell network, and for the pacing by electrical stimulation of cardiomyocyte networks.

Influence of Nanopore Shapes on Thermal Conductivity of Two-Dimensional Nanoporous Material.

PubMed

Huang, Cong-Liang; Huang, Zun; Lin, Zi-Zhen; Feng, Yan-Hui; Zhang, Xin-Xin; Wang, Ge

2016-12-01

The influence of nanopore shapes on the electronic thermal conductivity (ETC) was studied in this paper. It turns out that with same porosity, the ETC will be quite different for different nanopore shapes, caused by the different channel width for different nanopore shapes. With same channel width, the influence of different nanopore shapes can be approximately omitted if the nanopore is small enough (smaller than 0.5 times EMFP in this paper). The ETC anisotropy was discovered for triangle nanopores at a large porosity with a large nanopore size, while there is a similar ETC for small pore size. It confirmed that the structure difference for small pore size may not be seen by electrons in their moving.

Dutch women in midwife-led care at the onset of labour: which pain relief do they prefer and what do they use?

PubMed Central

2013-01-01

Background Pain experienced during labour is more extreme than many other types of physical pain. Many pregnant women are concerned about labour pain and about how they can deal with this pain effectively. The aim of this study was to examine the associations among low risk pregnant women’s characteristics and their preferred use and actual use of pain medication during labour. Methods Our study is part of the DELIVER study: a dynamic prospective multi-centre cohort study. The data for this study were collected between September 2009 and March 2011, from women at 20 midwifery practices throughout the Netherlands. Inclusion criteria for women were: singleton pregnancies, in midwife–led care at the onset of labour and speaking Dutch, English, Turkish or Arabic. Our study sample consisted of 1511 women in primary care who completed both questionnaire two (from 34 weeks of pregnancy up to birth) and questionnaire three (around six week post partum). These questionnaires were presented either online or on paper. Results Fifteen hundred and eleven women participated. Prenatally, 15.9% of women preferred some method of medicinal pain relief. During labour 15.2% of the total sample used medicinal pain relief and 25.3% of the women who indicated a preference to use medicinal pain relief during pregnancy, used pain medication. Non-Dutch ethnic background and planned hospital birth were associated with indicating a preference for medicinal pain relief during pregnancy. Primiparous and planned hospital birth were associated with actual use of the preferred method of medicinal pain relief during labour. Furthermore, we found that 85.5% of women who indicated a preference not to use pain medication prenatally, did not use any medication. Conclusions Only a small minority of women had a preference for intrapartum pain medication prenatally. Most women did not receive medicinal pain relief during labour, even if they had indicated a preference for it. Care providers should discuss the unpredictability of the labour process and the fact that actual use of pain medication often does not match with women’s preference prenatally. PMID:24325387

Controls on Characteristics of Event-based Catchment Flood Response over Continental United States

NASA Astrophysics Data System (ADS)

Shen, X.; Mei, Y.; Nikolopoulos, E. I.; Anagnostou, E. N.

2017-12-01

Understanding the primary drivers of regional flood characteristics is of utmost importance for the development of flood early warning system. Many studies have dedicated their efforts on this topic, but the majority of these works is limited in terms of either the size of event population or the extent of their study domain. This prevents us from drawing a comprehensive understanding of the primary factors controlling the variability of catchment flood response across different hydroclimatic regimes and basin geomorphologies. In this study, we render an exhaustive analysis that includes the effect of climate, hydrometeorology, geomorphology, land cover and initial wetness conditions on the catchment's flood response for 318,000 flood events distributed across 5,900 catchments (basin scales ranging from 1 to 106 km2) of the Continental United States (CONUS) over a 10-year (2002 to 2013) period. Event runoff coefficients, response time lag and hydrograph shape are used as diagnostic variables to represent catchment flood response. Our results indicate different distributions of runoff coefficient over different climate regions and seasons. The magnitude of runoff coefficient increases as function of initial basin wetness condition and rainfall depth. Opposite patterns are found for the actual evapotranspiration rate and baseflow index. On the other hand, response time lag is controlled by the relief ratio of the basins and the mean flow length of the events; hydrograph shape reveals increasing trend with soil moisture condition and relief ratio.

Fixation of the stressed state of glass plates by coating them with thin films using a plasma focus installation

NASA Astrophysics Data System (ADS)

Kolokoltsev, V. N.; Degtiarev, V. F.; Borovitskaya, I. V.; Nikulin, V. Ya.; Peregudova, E. N.; Silin, P. V.; Eriskin, A. A.

2018-01-01

Elastic deformation in transparent mediums is usually studied by the photoelasticity method. For opaque mediums the method of film coating and strain gauge method are used. After the external load was removed, the interference pattern corresponding to elastic deformation of the material disappears. It is found that the elastic deformation state of the thin glass plate under the action of concentrated load can be fixed during the deposition of a thin metal film. Deposition of thin copper films was carried out by passing of plasma through the copper tube installed inside the Plasma Focus installation. After removing of the load, interference pattern on the glass plates was observed in the form of Newton’s rings and isogers in non-monochromatic light on the CCD scanners which uses uorescent lamps with cold cathode. It is supposed that the copper film fixes the relief of the surface of the glass plate at the time of deformation and saves it when the load is removed. In the case of a concentrated load, this relief has the shape of a thin lens of large radius. For this reason, the interference of coherent light rays in a thin air gap between the glass of the scanners atbed and the lens surface has the shape of Newton's rings. In this case, when scanning the back side of the plate, isogyres are observed. The presented method can be used in the analysis of the mechanical stress in a various optical elements.

Fluidics cube for biosensor miniaturization

NASA Technical Reports Server (NTRS)

Dodson, J. M.; Feldstein, M. J.; Leatzow, D. M.; Flack, L. K.; Golden, J. P.; Ligler, F. S.

2001-01-01

To create a small, portable, fully automated biosensor, a compact means of fluid handling is required. We designed, manufactured, and tested a "fluidics cube" for such a purpose. This cube, made of thermoplastic, contains reservoirs and channels for liquid samples and reagents and operates without the use of any internal valves or meters; it is a passive fluid circuit that relies on pressure relief vents to control fluid movement. We demonstrate the ability of pressure relief vents to control fluid movement and show how to simply manufacture or modify the cube. Combined with the planar array biosensor developed at the Naval Research Laboratory, it brings us one step closer to realizing our goal of a handheld biosensor capable of analyzing multiple samples for multiple analytes.

Time-dependent analysis of dosage delivery information for patient-controlled analgesia services.

PubMed

Kuo, I-Ting; Chang, Kuang-Yi; Juan, De-Fong; Hsu, Steen J; Chan, Chia-Tai; Tsou, Mei-Yung

2018-01-01

Pain relief always plays the essential part of perioperative care and an important role of medical quality improvement. Patient-controlled analgesia (PCA) is a method that allows a patient to self-administer small boluses of analgesic to relieve the subjective pain. PCA logs from the infusion pump consisted of a lot of text messages which record all events during the therapies. The dosage information can be extracted from PCA logs to provide easily understanding features. The analysis of dosage information with time has great help to figure out the variance of a patient's pain relief condition. To explore the trend of pain relief requirement, we developed a PCA dosage information generator (PCA DIG) to extract meaningful messages from PCA logs during the first 48 hours of therapies. PCA dosage information including consumption, delivery, infusion rate, and the ratio between demand and delivery is presented with corresponding values in 4 successive time frames. Time-dependent statistical analysis demonstrated the trends of analgesia requirements decreased gradually along with time. These findings are compatible with clinical observations and further provide valuable information about the strategy to customize postoperative pain management.

40 CFR 1068.315 - What are the permanent exemptions for imported engines/equipment?

Code of Federal Regulations, 2010 CFR

2010-07-01

... security exemption. You may import an engine or piece of equipment under the national security exemption in... engine. (d) Extraordinary circumstances exemption. You may import a nonconforming engine or piece of.... You may import a nonconforming engine or piece of equipment if we grant hardship relief for a small...

38 CFR 74.12 - What must a concern submit to apply for VetBiz VIP Verification Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... personal and business tax returns, payroll records and personal history statements. An applicant must also...' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS REGULATIONS Application... dispatches the electronic forms, the applicant must also retain on file at the principal place of business a...

Spellings Wants to Use Accreditation as a Cudgel

ERIC Educational Resources Information Center

Bollag, Burton

2006-01-01

When the federal Commission on the Future of Higher Education delivered its final report to the secretary of education in September, accreditors and many higher-education leaders breathed a small sigh of relief. The document did not endorse an early recommendation that the current accreditation system be completely dismantled. Now, though, just a…

Software Solution Saves Dollars

ERIC Educational Resources Information Center

Trotter, Andrew

2004-01-01

This article discusses computer software that can give classrooms and computer labs the capabilities of costly PC's at a small fraction of the cost. A growing number of cost-conscious school districts are finding budget relief in low-cost computer software known as "open source" that can do everything from manage school Web sites to equip…

76 FR 11407 - Review of Wireline Competition Bureau Data Practices, Computer III Further Remand Proceedings...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-02

... removal of the narrowband comparably efficient interconnection (CEI) and open network architecture (ONA... and copying during normal business hours in the FCC Reference Information Center, Portals II, 445 12th... addition, pursuant to the Small Business Paperwork Relief Act of 2002, we will seek specific comment on how...

Charon tectonics

PubMed Central

Beyer, Ross A.; Nimmo, Francis; McKinnon, William B.; Moore, Jeffrey M.; Binzel, Richard P.; Conrad, Jack W.; Cheng, Andy; Ennico, K.; Lauer, Tod R.; Olkin, C.B.; Robbins, Stuart; Schenk, Paul; Singer, Kelsi; Spencer, John R.; Stern, S. Alan; Weaver, H.A.; Young, L.A.; Zangari, Amanda M.

2017-01-01

New Horizons images of Pluto’s companion Charon show a variety of terrains that display extensional tectonic features, with relief surprising for this relatively small world. These features suggest a global extensional areal strain of order 1% early in Charon’s history. Such extension is consistent with the presence of an ancient global ocean, now frozen. PMID:28919640

Cryoanalgesia in the management of intractable pain in the temporomandibular joint: a five-year retrospective review.

PubMed

Sidebottom, A J; Carey, E C; Madahar, A K

2011-12-01

Cryoanalgesia is a controversial adjunct to the management of chronic pain, but we know of no studies that have investigated its effect in the management of temporomandibular joint (TMJ) pain. In this five-year retrospective study we treated 17 patients who had severe pain that had failed to respond to all forms of conventional conservative treatment and were not appropriate for simple open operation. None had a clear indication for open operation on the joint or had too severe disease to warrant a simple procedure. Preliminary diagnostic injections of bupivacaine to the TMJ relieved the pain. We applied the cryoprobe in the region of the auriculotemporal nerve and TMJ capsule. There was a small but insignificant improvement in mean mouth opening together with a significant (p=0.000) improvement in visual analogue pain scores (VAS) from 6.8 (range 4-10) to 2.0 (range 0-7). Two patients had no change in their pain scores, and 2 had complete resolution of their pain. The mean number of pain-free months after treatment was 7 (IQR 3-15). Three patients had long-term pain relief, and 12 temporary relief; 6 of these subsequently had successful relief after total replacement of the TMJ. One patient had further cryoanalgesia, one was referred for specialist pain management, and one controlled the pain with nortriptyline. Of the 17 cases studied, 2 had temporary complications after cryoanalgesia. Cryoanalgesia is a useful adjunct to the management of intractable pain in the TMJ. Short-term pain relief can be achieved, and long-term relief is possible in some, deferring more complex and costly treatments. Crown Copyright © 2010. Published by Elsevier Ltd. All rights reserved.

Large scale ZnTe nanostructures on polymer micro patterns via capillary force photolithography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Florence, S. Sasi, E-mail: sshanmugaraj@jazanu.edu.sa; Can, N.; Adam, H.

2016-06-10

A novel approach to prepare micro patterns ZnTe nanostructures on Si (100) substrate using thermal evaporation is proposed by capillary Force Lithography (CFL) technique on a self-assembled sacrificial Polystyrene mask. Polystyrene thin films on Si substrates are used to fabricate surface micro-relief patterns. ZnTe nanoparticles have been deposited by thermal evaporation method. The deposited ZnTe nanoparticles properties were assessed by Atomic Force Microscope (AFM), Scanning Electron Microscope (SEM). SEM studies indicated that the particles are uniform in size and shape, well dispersed and spherical in shape. This study reports the micro-arrays of ZnTe nanoparticles on a self-assembled sacrificial PS maskmore » using a capillary flow photolithography process which showed excellent, morphological properties which can be used in photovoltaic devices for anti-reflection applications.« less

Operative treatment of sternal fractures.

PubMed

Al-Qudah, Abdullah

2006-10-01

Four patients with displaced sternal fractures complained of intractable pain following road traffic accidents. They all had bone deformities, but only one had associated traumatic injuries. All patients underwent operative reduction and fixation of the fractured sternum using a T-shaped compression-tension stainless steel plate and screws. Pain relief was often dramatic and all patients progressed to sternal union. None required reoperation. No infections occurred. Two plates have subsequently been removed. On follow-up, all patients had excellent results. Sternal plating, which is based on the tension-band principle, is an effective treatment for displaced sternal fractures.

Automated drumlin shape and volume estimation using high resolution LiDAR imagery (Curvature Based Relief Separation): A test from the Wadena Drumlin Field, Minnesota

NASA Astrophysics Data System (ADS)

Yu, Peter; Eyles, Nick; Sookhan, Shane

2015-10-01

Resolving the origin(s) of drumlins and related megaridges in areas of megascale glacial lineations (MSGL) left by paleo-ice sheets is critical to understanding how ancient ice sheets interacted with their sediment beds. MSGL is now linked with fast-flowing ice streams but there is a broad range of erosional and depositional models. Further progress is reliant on constraining fluxes of subglacial sediment at the ice sheet base which in turn is dependent on morphological data such as landform shape and elongation and most importantly landform volume. Past practice in determining shape has employed a broad range of geomorphological methods from strictly visualisation techniques to more complex semi-automated and automated drumlin extraction methods. This paper reviews and builds on currently available visualisation, semi-automated and automated extraction methods and presents a new, Curvature Based Relief Separation (CBRS) technique; for drumlin mapping. This uses curvature analysis to generate a base level from which topography can be normalized and drumlin volume can be derived. This methodology is tested using a high resolution (3 m) LiDAR elevation dataset from the Wadena Drumlin Field, Minnesota, USA, which was constructed by the Wadena Lobe of the Laurentide Ice Sheet ca. 20,000 years ago and which as a whole contains 2000 drumlins across an area of 7500 km2. This analysis demonstrates that CBRS provides an objective and robust procedure for automated drumlin extraction. There is strong agreement with manually selected landforms but the method is also capable of resolving features that were not detectable manually thereby considerably expanding the known population of streamlined landforms. CBRS provides an effective automatic method for visualisation of large areas of the streamlined beds of former ice sheets and for modelling sediment fluxes below ice sheets.

The influence of the San Gregorio fault on the morphology of Monterey Canyon

USGS Publications Warehouse

McHugh, C.M.G.; Ryan, William B. F.; Eittreim, S.; Donald, Reed

1998-01-01

A side-scan sonar survey was conducted of Monterey Canyon and the San Gregorio fault zone, off shore of Monterey Bay. The acoustic character and morphology of the sonar images, enhanced by SeaBeam bathymetry, show the path of the San Gregorio fault zone across the shelf, upper slope, and Monterey Canyon. High backscatter linear features a few kilometers long and 100 to 200 m wide delineate the sea-floor expression of the fault zone on the shelf. Previous studies have shown that brachiopod pavements and carbonate crusts are the source of the lineations backscatter. In Monterey Canyon, the fault zone occurs where the path of the canyon makes a sharp bend from WNW to SSW (1800 m). Here, the fault is marked by NW-SE-trending, high reflectivity lineations that cross the canyon floor between 1850 m and 1900 m. The lineations can be traced to ridges on the northwestern canyon wall where they have ~ 15 m of relief. Above the low-relief ridges, bowl-shaped features have been excavated on the canyon wall contributing to the widening of the canyon. We suggest that shear along the San Gregorio fault has led to the formation of the low-relief ridges near the canyon wall and that carbonate crusts, as along the shelf, may be the source of the high backscatter features on the canyon floor. The path of the fault zone across the upper slope is marked by elongated tributary canyons with high backscatter floors and 'U'-shaped cross-sectional profiles. Linear features and stepped scarps suggestive of recent crustal movement and mass-wasting, occur on the walls and floors of these canyons. Three magnitude-4 earthquakes have occurred within the last 30 years in the vicinity of the canyons that may have contributed to the observed features. As shown by others, motion along the fault zone has juxtaposed diverse lithologies that outcrop on the canyon walls. Gully morphology and the canyon's drainage patterns have been influenced by the substrate into which the gullies have formed.

Trace fossils and paleoenvironments of lower and middle Austin Chalk (upper Cretaceous), north-central Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dawson, W.C.; Reaser, D.F.

Outcrops of lower and middle Austin Chalk in the vicinity of Cedar Hill and Waxahachie, Texas (designated site of the Superconducting Super Collider), are profusely bioturbated. The lower Austin (Coniacian) disconformably overlies the Eagle Ford Shale (Turonian) and consists of about 60 m of medium- to thick-bedded indurated chalk with thin intervening marls. The middle Austin (Santonian) is composed of about 65 m of thick-bedded marl containing thin beds of argillaceous chalk. Both chalk and marl units are moderately to intensely bioturbated. However, ichnofossils are more conspicuous in chalks where multiple episodes of burrowing are recognizable. Early formed burrows (indistinctmore » mottles) represent the initial softground Austin substrate. Later generations of well-preserved burrows record a post-compaction (dewatered) firmground substrate. No hardgrounds have been recognized. The abundance and diversity of ichnofossils in Austin strata are in marked contrast to the paucity of other megafauna, except large inoceramids. Planolites, Teichichnus, Thalassinoides, and Chondrites are the predominant ichnogenera in the lower Austin; these forms are superimposed on a background of nondiagnostic, irregularly shaped mottles. Some strata contain well-preserved J-, S-, T-, U-, Y-, and X-shaped traces having menicus fillings. These subhorizontal, endogenic, full-relief burrows are typically infilled with dark gray (pyritic) chalk. Locally, pyrite or Fe-oxide-filled vertical tubes are preserved. Many traces have been deformed by compaction. The middle Austin contains Planolites, Chondrites, Thalassinoides, Pseudobilobites, and both small- and large-diameter, sinuous, horizontal burrows. These ichnofossils are infilled with chalk or comminuted shells and are more resistant to weathering than the surrounding middle Austin marl. Intensely burrowed horizons occur in association with distinctive Fe-stained chalk beds.« less

Morphology of upper laurentian fan using GLORIA long-range side-scan sonar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Masson, D.G.; Field, M.E.; Gardner, J.V.

1985-06-01

A long-range side-scan sonar (GLORIA) survey of the upper Laurentian Fan shows, for the first time, the regional geomorphology of this large and complex sedimentary body. The channels of the upper continental slope coalesce on the upper fan to form four major fan valleys. The largest of these, Eastern Valley, is U-shaped in cross section and up to 25 km (15 mi) wide with a large levee on the western flank that reaches a maximum height of more than 1 km (3,300 ft) above the valley floor. The remaining valleys, Western, Central, and Grand Banks, are typically more V-shaped inmore » cross section and are up to 5 km (3 mi) wide. Extensive gullying is observed on the walls of all the channels. Sonographs of the floor of Eastern Valley show a strong, linear fabric elongated parallel with the valley walls that appears to be related to mesoscale relief on the valley floor. At water depths between 3,500 and 4,100 m (11,550 and 13,530 ft), two major fan valleys are created by the merging of the four major valleys of the upper fan. Both fan valleys are associated with large, asymmetric levee complexes that reach heights of more than 500 m (1,650 ft) above the valley floors. The GLORIA data show evidence for several amphitheaterlike slump scars in the region of the 1929 earthquake epicenter. However, the authors see no evidence for movement of large coherent sediment blocks as postulated by earlier workers. They suggest that the turbidity currents that occurred after the 1929 earthquake may have formed by the coalescence of many small slumps rather than from a single large slump.« less

38 CFR 74.26 - What types of business information will VA collect?

Code of Federal Regulations, 2010 CFR

2010-07-01

... VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS REGULATIONS Records Management § 74.26 What types of business information will VA collect? VA will examine a variety of business records. See § 74.12, “What is... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false What types of business...

46 CFR 56.97-25 - Preparation for testing (reproduces 137.2).

Code of Federal Regulations, 2010 CFR

2010-10-01

... expansion. If a pressure test is to be maintained for a period of time and the test medium in the system is subject to thermal expansion, precautions must be taken to avoid excessive pressure. A small relief valve...) Restraint or isolation of expansion joints. Expansion joints must be provided with temporary restraint, if...

46 CFR 56.97-25 - Preparation for testing (reproduces 137.2).

Code of Federal Regulations, 2011 CFR

2011-10-01

... expansion. If a pressure test is to be maintained for a period of time and the test medium in the system is subject to thermal expansion, precautions must be taken to avoid excessive pressure. A small relief valve...) Restraint or isolation of expansion joints. Expansion joints must be provided with temporary restraint, if...

38 CFR 74.15 - What length of time may a business participate in VetBiz VIP Verification Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... business participate in VetBiz VIP Verification Program? 74.15 Section 74.15 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VETERANS SMALL BUSINESS REGULATIONS Application Guidelines § 74.15 What length of time may a business participate in VetBiz VIP Verification Program? (a) A...

Influence of Global Shapes on Children's Coding of Local Geometric Information in Small-Scale Spaces

ERIC Educational Resources Information Center

Chiang, Noelle C.

2013-01-01

This research uses enclosed whole shapes, rather than visual form fragments, to demonstrate that children's use of local geometric information is influenced by global shapes in small-scale spaces. Three- to six-year-old children and adults participated in two experiments with a table-top task. In Experiment 1, participants were presented with a…

Geology and mineral deposits of Churchill County, Nevada

USGS Publications Warehouse

Willden, Ronald; Speed, Robert C.

1974-01-01

Churchill County, in west-central Nevada, is an area of varied topography and geology that has had a rather small total mineral production. The western part of the county is dominated by the broad low valley of the Carson Sink, which is underlain by deposits of Lake Lahontan. The bordering mountain ranges to the west and south are of low relief and underlain largely by Tertiary volcanic and sedimentary units. Pre-Tertiary rocks are extensively exposed east of the Carson Sink in the Stillwater Range, Clan Alpine Mountains, Augusta Mountains, and New Pass Mountains. The eastern valleys are underlain by Quaternary alluvial and lacustrine deposits contemporaneous with the western deposits of Lake Lahontan. The eastern mountain ranges are more rugged than the western ranges and have higher relief; the eastern valleys are generally narrower.

Small Towns in a Rural Area: A Study of the Problems of Small Towns in Idaho. Idaho Agricultural Experiment Station Research Bulletin No. 91, April 1976.

ERIC Educational Resources Information Center

Hamilton, J. R.; And Others

Using aggregate data from several Idaho counties and towns, the study examined the economic forces which pressure small town people and merchants--pressures which ultimately shape and will shape small towns in areas like Idaho. Six towns chosen for intensive study were Priest River, Cottonwood, Riggins, Shoshone, Oakley, and Malad. Focusing on…

Low-cost high-quality Fe-based shape memory alloys suitable for pipe joints

NASA Astrophysics Data System (ADS)

Kajiwara, Setsuo; Baruj, Albert L.; Kikuchi, Takehiko; Shinya, Norio

2003-08-01

By addition of small amount of Nb and C to the conventional Fe-Mn-Si based shape memory alloys, shape memory properties are greatly improved in such an extent that the costly 'training' heat treatment is no more necessary. The key to this remarkable improvement of shape memory effect is to produce small NbC precipitates of about several nm in size in austenite. In order to generate such very small NbC particles, the sample is firstly rolled at 870 K and then aged at 1070 K. An example of Fe-28Mn-6Si-5Cr-0.53Nb-0.06C (mass %) alloy is shown; 95% shape recovery for initial strain of 4% is obtained and the shape recovery stress of about 300 MPa is attained for the sample pre-rolled 14%, which is well above the criterion for industry application of pipe jointing. A pipe jointing with this material is demonstrated.

Mars exploration rover geologic traverse by the spirit rover in the plains of Gusev crater, Mars

USGS Publications Warehouse

Crumpler, L.S.; Squyres, S. W.; Arvidson, R. E.; Bell, J.F.; Blaney, D.; Cabrol, N.A.; Christensen, P.R.; DesMarais, D.J.; Farmer, J.D.; Fergason, R.; Golombek, M.P.; Grant, F.D.; Grant, J. A.; Greeley, R.; Hahn, B.; Herkenhoff, K. E.; Hurowitz, J.A.; Knudson, A.T.; Landis, G.A.; Li, R.; Maki, J.; McSween, H.Y.; Ming, D. W.; Moersch, J.E.; Payne, M.C.; Rice, J.W.; Richter, L.; Ruff, S.W.; Sims, M.; Thompson, S.D.; Tosca, N.; Wang, A.; Whelley, P.; Wright, S.P.; Wyatt, M.B.

2005-01-01

The Spirit rover completed a 2.5 km traverse across gently sloping plains on the floor of Gusev crater from its location on the outer rim of Bonneville crater to the lower slopes of the Columbia Hills, Mars. Using the Athena suite of instruments in a transect approach, a systematic series of overlapping panoramic mosaics, remote sensing observations, surface analyses, and trenching operations documented the lateral variations in landforms, geologic materials, and chemistry of the surface throughout the traverse, demonstrating the ability to apply the techniques of field geology by remote rover operations. Textures and shapes of rocks within the plains are consistent with derivation from impact excavation and mixing of the upper few meters of basaltic lavas. The contact between surrounding plains and crater ejecta is generally abrupt and marked by increases in clast abundance and decimeter-scale steps in relief. Basaltic materials of the plains overlie less indurated and more altered rock types at a time-stratigraphic contact between the plains and Columbia Hills that occurs over a distance of one to two meters. This implies that regional geologic contacts are well preserved and that Earth-like field geologic mapping will be possible on Mars despite eons of overturn by small impacts. ?? 2005 Geological Society of America.

Fabrication of small complex-shaped optics by plasma chemical vaporization machining with a microelectrode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Takino, Hideo; Shibata, Norio; Itoh, Hiroshi

2006-08-10

We have developed plasma chemical vaporization machining by using a microelectrode for the fabrication of small complex-shaped optical surfaces. In this method, a0.5 mm diameter pipe microelectrode, from which processing gas is drawn in, generates a small localized plasma that is scanned over a work piece under numerical computer control to shape a desired surface. A12 mmx12 mm nonaxisymmetric mirror with a maximum depth of approximately 3 {mu}m was successfully fabricated with a peak-to-valley shape accuracy of 0.04 {mu}m in an area excluding the edges of the mirror. The average surface roughness was 0.58 nm, which is smooth enough formore » optical use.« less

Corticosteroid Injections Give Small and Transient Pain Relief in Rotator Cuff Tendinosis: A Meta-analysis.

PubMed

Mohamadi, Amin; Chan, Jimmy J; Claessen, Femke M A P; Ring, David; Chen, Neal C

2017-01-01

The ability of injection of corticosteroids into the subacromial space to relieve pain ascribed to rotator cuff tendinosis is debated. The number of patients who have an injection before one gets relief beyond what a placebo provides is uncertain. We asked: (1) Do corticosteroid injections reduce pain in patients with rotator cuff tendinosis 3 months after injection, and if so, what is the number needed to treat (NNT)? (2) Are multiple injections better than one single injection with respect to pain reduction at 3 months? We systematically searched seven electronic databases for randomized controlled trials of corticosteroid injection for rotator cuff tendinosis compared with a placebo injection. Eligible studies had at least 10 adults and used pain intensity as an outcome measure. The Hedges's g as adjusted pooled standardized mean difference (SMD) (which expresses the size of the intervention effect in each study relative to the total variability observed among pooled studies) and NNT were calculated at assessment points less than 1 month, 1-2 months, and 2-3 months. The protocol of this study was registered at the international prospective register of systematic reviews. Eleven studies of 726 patients satisfied our criteria for data pooling. Three studies containing 292 patients used repeat injections. A random effects model was used owing to substantial heterogeneity among studies. The funnel plot indicated the possibility of some missing studies, but Orwin's fail-safe N and Duval and Tweedie's trim and fill suggested that missing studies would not significantly affect the results. Corticosteroid injection did not reduce pain intensity in adult patients with rotator cuff tendinosis more than a placebo injection at the 3-month assessment. A small transient pain relief occurred at the assessment between 4 and 8 weeks with a SMD of 0.52 (range, 0.27-0.78) (p < 0.001). At least five patients must be treated for one patient's pain to be transiently reduced to no more than mild. Multiple injections were not found to be more effective than a single injection at any time. Corticosteroid injections provide-at best-minimal transient pain relief in a small number of patients with rotator cuff tendinosis and cannot modify the natural course of the disease. Given the discomfort, cost, and potential to accelerate tendon degeneration associated with corticosteroids, they have limited appeal. Their wide use may be attributable to habit, underappreciation of the placebo effect, incentive to satisfy rather than discuss a patient's drive toward physical intervention, or for remuneration, rather than their utility. Level I, therapeutic study.

Implementation of the new hydrographic technologies for bottom topography and seafloor gas venting investigations in the russian northern seas

NASA Astrophysics Data System (ADS)

Koloskov, Evgenii

2017-04-01

The report examines modern hydrographic technologies for the Russian northern seas investigations. The new hydro acoustics methods for seabed study are discussed. It presents stages of seafloor relief studies in the Russian Arctic seas since the 1950s and the obtained results. At the beginning of the 21st century an entirely new phase of bathymetric investigations began with the use of Multibeam Echosounders (MB) and modern hydrographic software. The software tools to process and analyze the bathymetry, and more recently to characterize the seabed from the backscatter, are available in a majority of modern sonar systems. Besides the bathymetry and sonar data, modern MB can produce water column images. These hydrographic technologies provide the possibility to achieve a high level of the seafloor topography. The latest generation of hydrographic MB now has the ability to provide the water column images along with the seafloor. The gas seeps from multibeam water column data can be distantly discerned against the seabed relief background with the aid of the Fledermause software package ("FMMidwater" module). The ability to integrate the water column data with the seafoor and other information,in an integrated geospatial and temporal environment, enhanced the analysis and interpretation of the data which is essential for marine geological research and investigations. The modern hydrographic equipment presents the ability to integrate the MB digital relief models (DTM) and sub bottom profiler data. This provide the possibility to obtain not only the detailed seabed topography, but also the additional information concerning the structure of under bottom soil layers and presence of the endogenous objects in near bottom environment. The importance of the hydrographic software tools needed to process and analyze the bathymetry and water column data are emphasized. The practical importance of the water column and bottom profiler data processing for the submarine gas-hydrates survey is stated. The attention is paid to the implementation of the parametric sub bottom profilers - the low frequency sonar for the sea bottom vertical section investigation. The ability for the integrated presentation of the multibeam bathymetry and vertical curtains in the 3D environment are discussed. As an example of the modern swath survey results achieved with Kongsberg EM2040CD MB and hydrographic information technology QINSy/ Fledermause, are discussed and presented. This survey was performed for the RosNeft company in the Kara sea. Recommendations for the implementation of the multi beam echo sounder and parametric sub bottom profiler for the combined hydrographic and submarine gas-hydrates survey in the Russian northern seas are delivered.The gas-hydrate survey guidelines using MB and QINSy/Fledermause software are provided. The hydrographic software tools used to process and analyze the bathymetry can create the seafloor DTM with the high degree of resolution and provide 3D visualization.These new possibilities provide such realistic view of the sea bottom relief and environment that can be characterized as the marine landscapes. Thus it became possible to investigate the relief morphological peculiarities and obtain the information about the relief genesis. This opens the new opportunities for using the acoustic techniques for varies types of marine activity including the bottom environmental study. The appearance of the bottom thermokarst activity derived from the high resolution DTM generated from the real time MB data is presented. The bottom thermokarst provides the potential threat for underwater pipelines and other submarine communications. The arctic bottom relief peculiarities are also covered including grounded hummock traces and dome-shaped elevations. The investigation of such bottom land forms has become possible recently as the result of implementing the wide swath survey methods. Such unique relief features are in general related to seabed gas venting in the form of the submarine gas-hydrates seeps. The opportunities for investigation of the morphological relief peculiarities and getting the new information is mportant also for varies types of marine activity including the marine ecology study. The arctic sea specific microrelief images are provided to show the abnormality of the bottom surface. The main attention is paid to specific and bottom features such as trenches the grounded hummock traces and dome-shaped elevations of the Pingo-type-unique forms of microrelief usually confined to the bottom gas flow in the form of methane emissions. The attention is also paid to the consequences of the global climate change and its influence on the bottom sole. Key words: hydrographic technologies, hydro acoustics methods, swathe survey, sea bottom vertical section, submarine gas-hydrates, submarine permafrost, seafloor gas venting,multi beam echo sounder, parametric sub bottom profiler.

Photosensitive response of azobenzene containing films towards pure intensity or polarization interference patterns

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yadavalli, Nataraja Sekhar; Santer, Svetlana, E-mail: santer@uni-potsdam.de; Saphiannikova, Marina

2014-08-04

In this paper, we report on differences in the response of photosensitive azobenzene containing films upon irradiation with the intensity or polarization interference patterns. Two materials are studied differing in the molecular weight: an azobenzene-containing polymer and a molecular glass formed from a much smaller molecule consisting of three connected azobenzene units. Topography changes occurring along with the changes in irradiation conditions are recorded using a homemade set-up combining an optical part for generation and shaping of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. In this way, we could reveal the unique behaviormore » of photosensitive materials during the first few minutes of irradiation: the change in topography is initially driven by an increase in the azobenzene free volume along with the trans-cis isomerization, followed by the mass transport finally resulting in the surface relief grating. This study demonstrates the great potential of our setup to experimentally highlight puzzling processes governing the formation of surface relief gratings.« less

Optimization of nonbinary slanted surface-relief gratings as high-efficiency broadband couplers for light guides.

PubMed

Bai, Benfeng; Laukkanen, Janne; Kuittinen, Markku; Siitonen, Samuli

2010-10-01

We propose and investigate the use of slanted surface-relief gratings with nonbinary profiles as high-efficiency broadband couplers for light guides. First, a Chandezon-method-based rigorous numerical formulation is presented for modeling the slanted gratings with overhanging profiles. Then, two typical types of slanted grating couplers--a sinusoidal one and a trapezoidal one--are studied and optimized numerically, both exhibiting a high coupling efficiency of over 50% over the full band of white LED under the normal illumination of unpolarized light. Reasonable structural parameters with nice tolerance have been obtained for the optimized designs. It is found that the performance of the couplers depends little on the grating profile shape, but primarily on the grating period and the slant angle of the ridge. The underlying mechanism is analyzed by the equivalence rules of gratings, which provide useful guidelines for the design and fabrication of the couplers. Preliminary investigation has been performed on the fabrication and replication of the slanted overhanging grating couplers, which shows the feasibility of fabrication with mature microfabrication techniques and the perspective for mass production.

Application of Basin Morphometry Laws in catchments of the south-western quadrangle of south-eastern Nigeria

NASA Astrophysics Data System (ADS)

Aisuebeogun, A. O.; Ezekwe, I. C.

2013-09-01

The relationship between process and form has been at the core of research in fluvial geomorphology. Form-process relationships of a natural river basin are strongly influenced by its hydrologic and sedimentologic processes as basin morphometric properties of length, shape, and relief, change in response to various hydrologic stimuli from the environment, but usually in line with well established laws. In the four river basins (Orashi, Otamiri, Sombreiro, New Calabar) examined in this study, however, empirical evidence does not conform neatly with theoretical postulates. Remarkable variations are noted in the morphometric properties of the catchments, when compared with established morphometric laws. The most varied in conformity are the Orashi and New Calabar basins, although the Sombreiro and Otamiri catchments also show some level of variation. Prime explanation for the morphometric and topographic non-conformity is caused by the nature of surficial material and the profoundly shallow relief of much of the study area, especially the alluvial flood and deltaic plains to the south and south-west of the study area.

Influence of Tooth Spacing Error on Gears With and Without Profile Modifications

NASA Technical Reports Server (NTRS)

Padmasolala, Giri; Lin, Hsiang H.; Oswald, Fred B.

2000-01-01

A computer simulation was conducted to investigate the effectiveness of profile modification for reducing dynamic loads in gears with different tooth spacing errors. The simulation examined varying amplitudes of spacing error and differences in the span of teeth over which the error occurs. The modification considered included both linear and parabolic tip relief. The analysis considered spacing error that varies around most of the gear circumference (similar to a typical sinusoidal error pattern) as well as a shorter span of spacing errors that occurs on only a few teeth. The dynamic analysis was performed using a revised version of a NASA gear dynamics code, modified to add tooth spacing errors to the analysis. Results obtained from the investigation show that linear tip relief is more effective in reducing dynamic loads on gears with small spacing errors but parabolic tip relief becomes more effective as the amplitude of spacing error increases. In addition, the parabolic modification is more effective for the more severe error case where the error is spread over a longer span of teeth. The findings of this study can be used to design robust tooth profile modification for improving dynamic performance of gear sets with different tooth spacing errors.

Sharp and round shapes of seen objects have distinct influences on vowel and consonant articulation.

PubMed

Vainio, L; Tiainen, M; Tiippana, K; Rantala, A; Vainio, M

2017-07-01

The shape and size-related sound symbolism phenomena assume that, for example, the vowel [i] and the consonant [t] are associated with sharp-shaped and small-sized objects, whereas [ɑ] and [m] are associated with round and large objects. It has been proposed that these phenomena are mostly based on the involvement of articulatory processes in representing shape and size properties of objects. For example, [i] might be associated with sharp and small objects, because it is produced by a specific front-close shape of articulators. Nevertheless, very little work has examined whether these object properties indeed have impact on speech sound vocalization. In the present study, the participants were presented with a sharp- or round-shaped object in a small or large size. They were required to pronounce one out of two meaningless speech units (e.g., [i] or [ɑ]) according to the size or shape of the object. We investigated how a task-irrelevant object property (e.g., the shape when responses are made according to size) influences reaction times, accuracy, intensity, fundamental frequency, and formant 1 and formant 2 of vocalizations. The size did not influence vocal responses but shape did. Specifically, the vowel [i] and consonant [t] were vocalized relatively rapidly when the object was sharp-shaped, whereas [u] and [m] were vocalized relatively rapidly when the object was round-shaped. The study supports the view that the shape-related sound symbolism phenomena might reflect mapping of the perceived shape with the corresponding articulatory gestures.

An analysis of polygenes affecting wing shape on chromosome 2 in Drosophila melanogaster.

PubMed Central

Weber, K; Eisman, R; Higgins, S; Morey, L; Patty, A; Tausek, M; Zeng, Z B

2001-01-01

Genetic effects on an index of wing shape on chromosome 2 of Drosophila melanogaster were mapped using isogenic recombinants with transposable element markers. At least 10 genes with small additive effects are dispersed evenly along the chromosome. Many interactions exist, with only small net effects in homozygous recombinants and little effect on phenotypic variance. Heterozygous chromosome segments show almost no dominance. Pleiotropic effects on leg shape are only minor. At first view, wing shape genes form a rather homogeneous class, but certain complexities remain unresolved. PMID:11729152

Storms over the Urban Forest: Planning, Responding, and Regreening-- A community Guide to Natural Disaster Relief

Treesearch

Lisa L. Burban; John W. Andresen

1994-01-01

Natural disasters which can occur in the United States include floods, hurricanes, tornadoes, and related high-velocity winds, as well as ice storms. Preparing for these natural disasters, which strike urban forests in large cities and small communities, should involve the cooperative effort of a wide array of municipal agencies, private arboricultural companies,...

Information and Communications Technology (ICT) Assessment Teams for First Responders in Humanitarian Assistance/Disaster Relief (HA/DR) Missions

DTIC Science & Technology

2012-03-01

Cross-sectional assessments versus more specialized thematic or sectional surveys • Formal, structured and often scientific assessments as...required output. Data collection issues - Observation. - Interviews. - Surveys . - Checklists. - Sampling. - Indicators and standards...Jacket Sleeping bag / pad Cash, $50 min, small bills/coins Poncho/rain suit Deodorant Toothbrush/paste Shampoo Mouthwash Dental floss Hand

Lacrimal neuralgia: so far, a missing cranial neuralgia.

PubMed

Pareja, Juan A; Cuadrado, María-Luz

2013-10-01

The lacrimal nerve supplies the lacrimal gland, the lateral upper eyelid, and a small cutaneous area adjacent to the external CANTHUS . First division trigeminal neuralgia, supraorbital/supratrochlear neuralgia, and infraorbital neuralgia have been acknowledged as neuralgic causes of pain in the forehead and periorbit. However, the lacrimal nerve has never been identified as a source of facial pain. Here we report two cases of lacrimal neuralgia. A 66-year-old woman had continuous pain in the lateral aspect of her left superior eyelid and an adjacent area of the temple since age 64. A 33-year-old woman suffered from continuous pain in a small area next to the lateral CANTHUS of her left eye since age 25. In both patients the superoexternal edge of the orbit was tender. In addition, sensory dysfunction could be demonstrated within the painful area. Anaesthetic blockades of the lacrimal nerve with lidocaine 2% resulted in complete but short-lasting relief. Pregabalin provided a complete response in the first patient. The second patient was refractory to various oral and topical drugs and different radiofrequency procedures, but she eventually obtained partial relief with pregabalin. Lacrimal neuralgia should be considered among the neuralgic causes of orbital and periorbital pain.

Quasi-static Design of Electrically Small Ultra-Wideband Antennas

DTIC Science & Technology

2017-02-01

this design reduces the width of the antenna, which implies that the bulb shape can be non -spherical at high frequencies. The stored energy in an...conclusion. The Quasi-static Antenna Design Algorithm generates three UWB non -spherical bulb shapes. The non -spherical bulb shape performs as well...TECHNICAL REPORT 3056 February 2017 Quasi-static Design of Electrically Small Ultra-Wideband Antennas Thomas O. Jones III Approved for public

The peculiar shapes of Saturn's small inner moons as evidence of mergers of similar-sized moonlets

NASA Astrophysics Data System (ADS)

Leleu, A.; Jutzi, M.; Rubin, M.

2018-05-01

The Cassini spacecraft revealed the spectacular, highly irregular shapes of the small inner moons of Saturn1, ranging from the unique 'ravioli-like' forms of Pan and Atlas2,3 to the highly elongated structure of Prometheus. Closest to Saturn, these bodies provide important clues regarding the formation process of small moons in close orbits around their host planet4, but their range of irregular shapes has not been explained yet. Here, we show that the spectrum of shapes among Saturn's small moons is a natural outcome of merging collisions among similar-sized moonlets possessing physical properties and orbits that are consistent with those of the current moons. A significant fraction of such merging collisions take place either at the first encounter or after 1-2 hit-and-run events, with impact velocities in the range of 1-5 times the mutual escape velocity. Close to head-on mergers result in flattened objects with large equatorial ridges, as observed on Atlas and Pan. With slightly more oblique impact angles, collisions lead to elongated, Prometheus-like shapes. These results suggest that the current forms of the small moons provide direct evidence of the processes at the final stages of their formation, involving pairwise encounters of moonlets of comparable size4-6. Finally, we show that this mechanism may also explain the formation of Iapetus' equatorial ridge7, as well as its oblate shape8.

Single dose oral naproxen and naproxen sodium for acute postoperative pain (Review)

PubMed Central

Mason, L; Edwards, JE; Moore, RA; McQuay, HJ

2014-01-01

Background Postoperative pain is often poorly managed. Treatment options include a range of drug therapies such as non-steroidal anti-inflammatory drugs (NSAIDs) of which naproxen is one. Naproxen is used to treat a variety of painful conditions including acute postoperative pain, and is often combined with sodium to improve its solubility for oral administration. Naproxen sodium 550 mg (equivalent to 500 mg of naproxen) is considered to be an effective dose for treating postoperative pain but to date no systematic review of the effectiveness of naproxen/naproxen sodium at different doses has been published. Objectives To assess the efficacy, safety and duration of action of a single oral dose of naproxen or naproxen sodium for acute postoperative pain in adults. Search strategy We searched The Cochrane Library, MEDLINE, EMBASE and the Oxford Pain Relief Database for relevant studies. Additional studies were identified from the reference list of retrieved reports. The most recent search was undertaken in July 2004. Selection criteria Included studies were randomised, double blind, placebo-controlled trials of a single dose of orally administered naproxen or naproxen sodium in adults with moderate to severe acute postoperative pain. Data collection and analysis Pain relief or pain intensity data were extracted and converted into dichotomous information to give the number of patients with at least 50% pain relief over four to six hours. Relative risk estimates (RR) and the number-needed-to-treat (NNT) for at least 50% pain relief were then calculated. Information was sought on the percentage of patients experiencing any adverse event, and the number-needed-to-harm was derived. Time to remedication was also estimated. Main results Ten trials (996 patients) met the inclusion criteria: nine assessed naproxen sodium; one combined the results from two small trials of naproxen alone. Included studies scored well for methodological quality. Meta-analysis of six trials (500 patients) that compared naproxen sodium 550 mg with placebo gave a RR for at least 50% pain relief over 4 to 6 hours of 4.2 (95% confidence interval (CI) 2.9 to 6.0) and an NNT of 2.6 (95% CI 2.2 to 3.2). Three trials (334 patients) assessed naproxen 400 mg and naproxen sodium 440 mg, giving a RR of 4.8 (95% CI 2.75 to 8.38). Two small studies indicated that naproxen 200 mg and naproxen sodium 220 mg may provide effective postoperative pain relief. There was no significant difference between the number of patients experiencing any adverse event on treatment compared with placebo. Weighted mean time to remedication for naproxen sodium 550 mg was 7.6 hours compared with 2.6 hours for placebo. Authors’ conclusions Naproxen sodium 550 mg, naproxen 400 mg and naproxen sodium 440 mg administered orally are effective analgesics for the treatment of acute postoperative pain in adults. A low incidence of adverse events was found but reporting was not consistent. PMID:15495091

Map reading tools for map libraries.

USGS Publications Warehouse

Greenberg, G.L.

1982-01-01

Engineers, navigators and military strategists employ a broad array of mechanical devices to facilitate map use. A larger number of map users such as educators, students, tourists, journalists, historians, politicians, economists and librarians are unaware of the available variety of tools which can be used with maps to increase the speed and efficiency of their application and interpretation. This paper identifies map reading tools such as coordinate readers, protractors, dividers, planimeters, and symbol-templets according to a functional classification. Particularly, arrays of tools are suggested for use in determining position, direction, distance, area and form (perimeter-shape-pattern-relief). -from Author

Mechanism for longitudinal growth of rod-shaped bacteria

NASA Astrophysics Data System (ADS)

Taneja, Swadhin; Levitan, Ben; Rutenberg, Andrew

2013-03-01

The peptidoglycan (PG) cell wall along with MreB proteins are major determinants of shape in rod-shaped bacteria. However the mechanism guiding the growth of this elastic network of cross-linked PG (sacculus) that maintains the integrity and shape of the rod-shaped cell remains elusive. We propose that the known anisotropic elasticity and anisotropic loading, due to the shape and turgor pressure, of the sacculus is sufficient to direct small gaps in the sacculus to elongate around the cell, and that subsequent repair leads to longitudinal growth without radial growth. We computationally show in our anisotropically stressed anisotropic elasticity model small gaps can extend stably in the circumferential direction for the known elasticity of the sacculus. We suggest that MreB patches that normally propagate circumferentially, are associated with these gaps and are steered with this common mechanism. This basic picture is unchanged in Gram positive and Gram negative bacteria. We also show that small changes of elastic properties can in fact lead to bi-stable propagation of gaps, both longitudinal and circumferential, that can explain the bi-stability in patch movement observed in ΔmblΔmreb mutants.

Design of the Park-in-Shape study: a phase II double blind randomized controlled trial evaluating the effects of exercise on motor and non-motor symptoms in Parkinson's disease.

PubMed

van der Kolk, Nicolien M; Overeem, Sebastiaan; de Vries, Nienke M; Kessels, Roy P C; Donders, Rogier; Brouwer, Marc; Berg, Daniela; Post, Bart; Bloem, Bas R

2015-04-16

Parkinson's disease (PD) is a neurodegenerative disorder with a wide range of motor and non-motor symptoms. Despite optimal medical management, PD still results in a high disability rate and secondary complications and many patients lead a sedentary lifestyle, which in turn is also associated with a higher co-morbidity and mortality. Exercise has been explored as a strategy to reduce secondary complications and results suggests that it not only provides general health benefits, but may also provide symptomatic relief. If this holds true exercise would be a very attractive addition to the therapeutic arsenal in PD. The supportive evidence remains incomplete. Here, we describe the design of the Park-in-Shape study, which primarily aims to evaluate whether aerobic exercise affords clinically relevant improvements in motor symptoms in sedentary PD patients. A specific new element is the introduction of gaming to optimize compliance to the exercise intervention. The Park-in-Shape study is a randomized controlled, assessor- and patient-blinded single center study. Two parallel groups will include a total of 130 patients, receiving either aerobic exercise on a home trainer equipped with gaming elements ("exergaming"), or a non-aerobic intervention (stretching, flexibility and relaxation exercises). Both groups are supported by a specifically designed motivational app that uses gaming elements to stimulate patients to exercise and rewards them after having completed the exercise. Both interventions are delivered at home at least 3 times a week for 30-45 minutes during 6 months. Eligible patients are community-dwelling, sedentary patients diagnosed with mild-moderate PD. The primary outcome is the MDS-UPDRS motor score (tested in the off state) after 6 months. Secondary outcomes include various motor and non-motor symptoms, quality of life, physical fitness, and adherence. This Park-in-Shape study is anticipated to answer the question whether high intensity aerobic exercise combined with gaming elements ("exergaming") provides symptomatic relief in PD. Strong elements include the double-blinded randomized controlled trial design, the MDS-UPDRS as valid primary outcome, the large sample size and unique combination of home-based pure aerobic exercise combined with gaming elements and motivational aspects. Dutch trial register NTR4743.

Morphology and controlling mechanisms of shallow water pockmarks in the Yellow Sea Basin of China: employing multibeam bathymetry, backscatter data and subbottom profile

NASA Astrophysics Data System (ADS)

Liu, X.

2017-12-01

The presence of fluid escape features like seafloor pockmarks are observed in continental margin basins and ocean floors worldwide. While most of the reported depressions developed at deep water, this study provides a description of shallow pockmark field in shallow water that no deep than 55m in continent of the Yellow Sea. Combined with the multi-beam bathymetry data, terrain slope and the back- scattering intensity data, this study calculated the morphological parameters of the seabed pockmarks and carried out quantitative analysis. The outline of the seabed pockmarks were accurately defined, and 282 pockmarks with circle, elliptic, or elongated shape in the plan view were analyzed in ArcGIS. The average diameter of the pockmarks was 0.94 km, average area and circumference were 0.88 km2 and 3.82 km, the pockmarks also have the aspect ratio of 1.83, and relief from 0.5m to 2.5 m. The profile of the pockmarks shaped like W1, W2 and V, respectively distributed in the north, south, and west of the pockmark group. The large plane size but small vertical scale may be associated with the low concentration of the fluid. The orientation of the major axis of the pockmarks has 3 major directions, pockmarks aligned around ENE - WSW, NNE SSW consistent with the main direction of the bottom current in the study area, while pockmarks aligned around NNW-SSE direction mainly controlled by submarine topography. Some pockmark clustered as pockmark chain, which shows that the pockmark shape controlled by the ancient river or lagoon of the sedimentary strata. The acoustic backscatter strength of the pockmark area is of -71dB to -60dB, the average strength data inside the pockmark is significantly higher than the outside, with a difference of 5dB. The high backscatter strength may attribute to the coarse sediments that left inside the pockmark due to winnowing of fine-grained sediments, or result of the precipitation of diagenitic or authigenic minerals associated with fluid venting.

Visualization of small scale structures on high resolution DEMs

NASA Astrophysics Data System (ADS)

Kokalj, Žiga; Zakšek, Klemen; Pehani, Peter; Čotar, Klemen; Oštir, Krištof

2015-04-01

Knowledge on the terrain morphology is very important for observation of numerous processes and events and digital elevation models are therefore one of the most important datasets in geographic analyses. Furthermore, recognition of natural and anthropogenic microrelief structures, which can be observed on detailed terrain models derived from aerial laser scanning (lidar) or structure-from-motion photogrammetry, is of paramount importance in many applications. In this paper we thus examine and evaluate methods of raster lidar data visualization for the determination (recognition) of microrelief features and present a series of strategies to assist selecting the preferred visualization of choice for structures of various shapes and sizes, set in varied landscapes. Often the answer is not definite and more frequently a combination of techniques has to be used to map a very diverse landscape. Researchers can only very recently benefit from free software for calculation of advanced visualization techniques. These tools are often difficult to understand, have numerous options that confuse the user, or require and produce non-standard data formats, because they were written for specific purposes. We therefore designed the Relief Visualization Toolbox (RVT) as a free, easy-to-use, standalone application to create visualisations from high-resolution digital elevation data. It is tailored for the very beginners in relief interpretation, but it can also be used by more advanced users in data processing and geographic information systems. It offers a range of techniques, such as simple hillshading and its derivatives, slope gradient, trend removal, positive and negative openness, sky-view factor, and anisotropic sky-view factor. All included methods have been proven to be effective for detection of small scale features and the default settings are optimised to accomplish this task. However, the usability of the tool goes beyond computation for visualization purposes, as sky-view factor, for example, is an essential variable in many fields, e.g. in meteorology. RVT produces two types of results: 1) the original files have a full range of values and are intended for further analyses in geographic information systems, 2) the simplified versions are histogram stretched for visualization purposes and saved as 8-bit GeoTIFF files. This means that they can be explored in non-GIS software, e.g. with simple picture viewers, which is essential when a larger community of non-specialists needs to be considered, e.g. in public collaborative projects. The tool recognizes all frequently used single band raster formats and supports elevation raster file data conversion.

75 FR 9691 - Review of the Commission's Program Access Rules and Examination of Programming Tying Arrangements

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-03

... collection requirements subject to the Paperwork Reduction Act of 1995 (PRA), Public Law 104-13 (44 U.S.C... to the Small Business Paperwork Relief Act of 2002, Public Law 107-198, see 44 U.S.C. 3506(c)(4), we... Cable Television Consumer Protection and Competition Act of 1992, Public Law 102-385, 106 Stat. 1460...

78 FR 2934 - Promoting Diversification of Ownership in the Broadcasting Services

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... Act of 1995, Public Law 104-13 (44 U.S.C. 3501-3520). In addition, pursuant to the Small Business Paperwork Relief Act of 2002, Public Law 107-198, see 44 U.S.C. 3506(c)(4), the commission seeks further... the policies and rules proposed in this Fifth FNPRM. The RFA, see 5 U.S.C. 601-612, was amended by the...

In vitro smooth muscle contractility before and after relief of experimental obstruction in the rat: application to the surgical management of ileal dilatation.

PubMed

Haraux, Elodie; Canarelli, Jean-Pierre; Khorsi, Hafida; Delanaud, Stéphane; Bach, Véronique; Gay-Quéheillard, Jérome

2014-03-01

Bowel dilatation occurs proximal to an obstruction and predisposes to intestinal dysmotility. The present study sought to determine whether or not changes in smooth muscle contractility and the thickness of the proximal, dilated bowel wall can be reversed following relief of the obstruction. Three groups of seven male Wistar rats were studied. In 8-week-old animals in a control group and a sham-operated group, a small segment of bowel (designated as R1 for controls and R2 for shams) was resected 5.0 cm from the cecum. In the third (operated) group, a narrow, isoperistaltic intestinal loop was created proximal to an end-to-end anastomosis of the ileum in 4-week-old animals. When these animals were 6 weeks old, the loop was re-anastomosed to the distal small bowel (after resection of the loop's distal portion, referred to as R3). Two weeks later, a small segment of bowel was resected proximal to the anastomosis (R4). We evaluated the thickness of the smooth muscle layers and the in vitro contractile responses of circular smooth muscle ileal strips (R1-R4) to electrical stimulation and pharmacological stimulation (with KCl, acetylcholine (ACh), substance P, N(G)-nitro-l-arginine methyl ester (L-NAME) and histamine). The amplitudes of contraction in response to electrical and Ach-mediated stimulation were higher for R3 than for R4 (P<0.001), R1 and R2 (both P<0.05). Compared with R1 and R2, the smooth muscle layer was three times as thick in R3 (P<0.001) and 2.5 times as thick in R4 (P<0.01). Our study provides evidence of the possible recovery of intestinal motility (in response to neurotransmitters involved in gut function) after the relief of an obstruction. If ileal motility can conceivably return to normal values, conservative surgical procedures in pediatric patients should be preferred (in order to leave a sufficient length of bowel and avoid short bowel syndrome). © 2013 Elsevier Inc. All rights reserved.

Custom therapeutic insoles based on both foot shape and plantar pressure measurement provide enhanced pressure relief.

PubMed

Owings, Tammy M; Woerner, Julie L; Frampton, Jason D; Cavanagh, Peter R; Botek, Georgeanne

2008-05-01

The purpose of this study was to determine whether custom insoles tailored to contours of the barefoot pressure distribution and shape of a patient's foot can reduce plantar pressures in the metatarsal head (MTH) region to a greater extent than conventional custom insoles. Seventy regions of elevated barefoot pressures (mean peak 834 kPa under MTHs) were identified in 20 subjects with diabetes. Foam box impressions of their feet were sent to three different orthotic supply companies for fabrication of custom insoles. One company was also given plantar pressure data, which were incorporated into the insole design. Measurements of in-shoe plantar pressures were recorded during gait for the three custom insoles in a flexible and a rocker-bottom shoe. Peak pressure and force-time integral were extracted for analysis. In 64 of 70 regions, the shape-plus-pressure-based insole in the flexible shoe achieved superior unloading compared with the two shape-based insoles. On average, peak pressure was reduced by 32 and 21% (both P

Mars Polar Lander Site Surface Details

NASA Technical Reports Server (NTRS)

1999-01-01

This picture is an enlargement of a portion of a MOC image taken in late July 1999, showing the onset of defrosting of the seasonal carbon dioxide frost cap (small, occasionally fan-shaped dark spots seen throughout this image). Two craters are seen in this image, a very rare occurrence on the south polar layered deposits. Shown for comparison at the same scale is a picture of Jack Murphy (now Qualcomm) Stadium in San Diego, California. Clearly visible in the inset is the baseball diamond and pitcher's mound; less clear but certainly visible are a number of automobiles (small light dots) in the parking lot west (to the left) of the stadium. The elevation of the sun in the Mars image is about 10o; the sunlight is coming from the bottom (north) in this image. The shadow of the rims of the craters can be used to determine their depths. The smaller crater in the bottom right corner is about 60 m (197 feet) across and 7 m (23 feet) deep; the large crater just below the inset is 175 m (574 feet) across and 17 m (56 feet) deep. Similar calculations for other features in the images indicate that much of the surface is smooth and flat. Relief is typically much less than 1-2 meters (3-7 feet) in height over areas of 10-15 meters across (33-49 feet).

Malin Space Science Systems and the California Institute of Technology built the MOC using spare hardware from the Mars Observer mission. MSSS operates the camera from its facilities in San Diego, CA. The Jet Propulsion Laboratory's Mars Surveyor Operations Project operates the Mars Global Surveyor spacecraft with its industrial partner, Lockheed Martin Astronautics, from facilities in Pasadena, CA and Denver, CO.

A systematic analysis of directional site effects at stations of the Italian Seismic Network to test the role of local topography

NASA Astrophysics Data System (ADS)

Pischiutta, Marta; Cianfarra, Paola; Salvini, Francesco; Cara, Fabrizio; Vannoli, Paola

2018-03-01

Directional site effects observed at seismological stations on pronounced relief are analyzed. We investigate the ground motion properties calculating horizontal-to-vertical spectral ratios and horizontal polarization of both ambient vibrations and earthquake records using broadband seismograms of the Italian Seismic Network. We find that a subset of 47 stations with pronounced relief, results in a significant (>2) directional amplification of the horizontal component, with a well defined, site-specific direction of motion. However, the horizontal spectral response of sites is not uniform, varying from an isolated (resonant) frequency peak to a broadband amplification, interesting frequency bands as large as 1-10 Hz in many cases. Using the 47 selected stations, we have tried to establish a relation between directional amplification and topography geometry in a 2D-vision, when applicable, through a morphological analysis of the Digital Elevation Model using Geographic Information Systems. The procedure computes the parameters that characterize the geometry of topographic irregularities (size and slope), in combination with a principal component analysis that automatically yields the orientation of the elongated ridges. In seeking a relation between directional amplification and the surface morphology, we have found that it is impossible to fit the variety of observations with a resonant topography model as well as to identify common features in the ground motion behavior for stations with similar topography typologies. We conclude that, rather than the shape of the topography, local structural complexities and details of the near-surface structure must play a predominant role in controlling ground motion properties at sites with pronounced relief.

A systematic analysis of directional site effects at stations of the Italian seismic network to test the role of local topography

NASA Astrophysics Data System (ADS)

Pischiutta, Marta; Cianfarra, Paola; Salvini, Francesco; Cara, Fabrizio; Vannoli, Paola

2018-07-01

Directional site effects observed at seismological stations on pronounced relief are analysed. We investigate the ground motion properties calculating horizontal-to-vertical spectral ratios and horizontal polarization of both ambient vibrations and earthquake records using broad-band seismograms of the Italian seismic network. We find that a subset of 47 stations with pronounced relief results in a significant (>2) directional amplification of the horizontal component, with a well-defined, site-specific direction of motion. However, the horizontal spectral response of sites is not uniform, varying from an isolated (resonant) frequency peak to a broad-band amplification, interesting frequency bands as large as 1-10 Hz in many cases. Using 47 selected stations, we have tried to establish a relation between directional amplification and topography geometry in a 2-D vision, when applicable, through a morphological analysis of the digital elevation model using geographic information systems. The procedure computes the parameters that characterize the geometry of topographic irregularities (size and slope), in combination with a principal component analysis that automatically yields the orientation of the elongated ridges. In seeking a relation between directional amplification and the surface morphology, we have found that it is impossible to fit the variety of observations with a resonant topography model as well as to identify common features in the ground motion behaviour for stations with similar topography typologies. We conclude that, rather than the shape of the topography, local structural complexities and details of the near-surface structure must play a predominant role in controlling ground motion properties at sites with pronounced relief.

Digital relief generation from 3D models

NASA Astrophysics Data System (ADS)

Wang, Meili; Sun, Yu; Zhang, Hongming; Qian, Kun; Chang, Jian; He, Dongjian

2016-09-01

It is difficult to extend image-based relief generation to high-relief generation, as the images contain insufficient height information. To generate reliefs from three-dimensional (3D) models, it is necessary to extract the height fields from the model, but this can only generate bas-reliefs. To overcome this problem, an efficient method is proposed to generate bas-reliefs and high-reliefs directly from 3D meshes. To produce relief features that are visually appropriate, the 3D meshes are first scaled. 3D unsharp masking is used to enhance the visual features in the 3D mesh, and average smoothing and Laplacian smoothing are implemented to achieve better smoothing results. A nonlinear variable scaling scheme is then employed to generate the final bas-reliefs and high-reliefs. Using the proposed method, relief models can be generated from arbitrary viewing positions with different gestures and combinations of multiple 3D models. The generated relief models can be printed by 3D printers. The proposed method provides a means of generating both high-reliefs and bas-reliefs in an efficient and effective way under the appropriate scaling factors.

Quantitative analysis and implications of drainage morphometry of the Agula watershed in the semi-arid northern Ethiopia

NASA Astrophysics Data System (ADS)

Fenta, Ayele Almaw; Yasuda, Hiroshi; Shimizu, Katsuyuki; Haregeweyn, Nigussie; Woldearegay, Kifle

2017-11-01

This study aimed at quantitative analysis of morphometric parameters of Agula watershed and its sub-watersheds using remote sensing data, geographic information system, and statistical methods. Morphometric parameters were evaluated from four perspectives: drainage network, watershed geometry, drainage texture, and relief characteristics. A sixth-order river drains Agula watershed and the drainage network is mainly dendritic type. The mean bifurcation ratio ( R b) was 4.46 and at sub-watershed scale, high R b values ( R b > 5) were observed which might be expected in regions of steeply sloping terrain. The longest flow path of Agula watershed is 48.5 km, with knickpoints along the main river which could be attributed to change of lithology and major faults which are common along the rift escarpments. The watershed has elongated shape suggesting low peak flows for longer duration and hence easier flood management. The drainage texture analysis revealed fine drainage which implies the dominance of impermeable soft rock with low resistance against erosion. High relief and steep slopes dominates, by which rough landforms (hills, breaks, and low mountains) make up 76% of the watershed. The S-shaped hypsometric curve with hypsometric integral of 0.4 suggests that Agula watershed is in equilibrium or mature stage of geomorphic evolution. At sub-watershed scale, the derived morphometric parameters were grouped into three clusters (low, moderate, and high) and considerable spatial variability was observed. The results of this study provide information on drainage morphometry that can help better understand the watershed characteristics and serve as a basis for improved planning, management, and decision making to ensure sustainable use of watershed resources.

Observations of pockmark flow structure in Belfast Bay, Maine, Part 1: current-induced mixing

USGS Publications Warehouse

Fandel, Christina L.; Lippmann, Thomas C.; Irish, James D.; Brothers, Laura L.

2017-01-01

Field observations of current profiles and temperature, salinity, and density structure were used to examine vertical mixing within two pockmarks in Belfast Bay, Maine. The first is located in 21 m water depth (sea level to rim), nearly circular in shape with a 45 m rim diameter and 12 m rim-to-bottom relief. The second is located in 25 m water depth, more elongated in shape with an approximately 80 m (36 m) major (minor) axis length at the rim, and 17 m relief. Hourly averaged current profiles were acquired from bottom-mounted acoustic Doppler current profilers deployed on the rim and center of each pockmark over successive 42 h periods in July 2011. Conductivity–temperature–depth casts at the rim and center of each pockmark show warmer, fresher water in the upper water column, evidence of both active and fossil thermocline structure 5–8 m above the rim, and well-mixed water below the rim to the bottom. Vertical velocities show up- and down-welling events that extend into the depths of each pockmark. An observed temperature change at both the rim and center occurs coincident with an overturning event below the rim, and suggests active mixing of the water column into the depths of each pockmark. Vertical profiles of horizontal velocities show depth variation at both the center and rim consistent with turbulent logarithmic current boundary layers, and suggest that form drag may possibly be influencing the local flow regime. While resource limitations prevented observation of the current structure and water properties at a control site, the acquired data suggest that active mixing and overturning within the sampled pockmarks occur under typical benign conditions, and that current flows are influenced by upstream bathymetric irregularities induced by distant pockmarks.

Topography-Dependent Motion Compensation: Application to UAVSAR Data

NASA Technical Reports Server (NTRS)

Jones, Cathleen E.; Hensley, Scott; Michel, Thierry

2009-01-01

The UAVSAR L-band synthetic aperture radar system has been designed for repeat track interferometry in support of Earth science applications that require high-precision measurements of small surface deformations over timescales from hours to years. Conventional motion compensation algorithms, which are based upon assumptions of a narrow beam and flat terrain, yield unacceptably large errors in areas with even moderate topographic relief, i.e., in most areas of interest. This often limits the ability to achieve sub-centimeter surface change detection over significant portions of an acquired scene. To reduce this source of error in the interferometric phase, we have implemented an advanced motion compensation algorithm that corrects for the scene topography and radar beam width. Here we discuss the algorithm used, its implementation in the UAVSAR data processor, and the improvement in interferometric phase and correlation achieved in areas with significant topographic relief.

[Human milk for neonatal pain relief during ophthalmoscopy].

PubMed

Ribeiro, Laiane Medeiros; Castral, Thaíla Corrêa; Montanholi, Liciane Langona; Daré, Mariana Firmino; Silva, Aline Carolina de Araújo; Antonini, Sonir Roberto Rauber; Scochi, Carmen Gracinda Silvan

2013-10-01

Ophthalmoscopy performed for the early diagnosis of retinopathy of prematurity (ROP) is painful for preterm infants, thus necessitating interventions for minimizing pain. The present study aimed to establish the effectiveness of human milk, compared with sucrose, for pain relief in premature infants subjected to ophthalmoscopy for the early diagnosis of ROP. This investigation was a pilot, quasi-experimental study conducted with 14 premature infants admitted to the neonatal intensive care unit (NICU) of a university hospital. Comparison between the groups did not yield a statistically significant difference relative to the crying time, salivary cortisol, or heart rate (HR). Human milk appears to be as effective as sucrose in relieving acute pain associated with ophthalmoscopy. The study's limitations included its small sample size and lack of randomization. Experimental investigations with greater sample power should be performed to reinforce the evidence found in the present study.

Electric Stimulation for Pain Relief in Patients with Fibromyalgia: A Systematic Review and Meta-analysis of Randomized Controlled Trials.

PubMed

Salazar, Ana Paula de Silva; Stein, Cinara; Marchese, Ritchele Redivo; Plentz, Rodrigo Della Mea; Pagnussat, Aline De Souza

2017-02-01

Fibromyalgia (FM) is a syndrome whose primary symptoms include chronic widespread muscle pain and fatigue. The treatment of patients with FM aims to provide symptomatic relief and improvement in physical capacities to perform daily tasks and quality of life. Invasive or non-invasive electric stimulation (ES) is used for pain relief in patients with FM. This systematic review aimed to assess the effects of treatment with ES, combined or not combined with other types of therapy, for pain relief in patients with FM. Systematic review and meta-analysis. Electronic search was conducted on databases (from the inception to April 2016): MEDLINE (accessed by PubMed), EMBASE, Cochrane Central Register of Controlled Trials (Cochrane CENTRAL), and Physiotherapy Evidence Database (PEDro). Two independent reviewers assessed the eligibility of studies based on the inclusion criteria: randomized controlled trials (RCTs) examining the effects of ES combined or not with other types of treatment for pain relief in patients with FM (according to the American College of Rheumatology), regardless of the ES dosages. The primary outcome was pain, assessed by the visual analogue scale (VAS). The secondary outcomes extracted were quality of life, assessed by short form-36 health survey (SF- 36), and fatigue, assessed by VAS. Nine studies were included, with 301 patients. The meta-analysis for pain showed positive effect of ES treatment versus control [-1.24 (95% CI: -2.39 to -0.08; I²: 87%, P = 0.04) n = 8 RCTs]. The sensitivity analysis for pain showed significant results for invasive ES, combined or not with other types of therapy [-0.94 (95% CI, -1.50 to -0.38; I² 0%, P = 0.001) n = 3 RCTs]. No significant improvement was found regarding quality of life [-3.48 (95% CI: -12.58 to 5.62; I²: 0%, P = 0.45), n = 2 RCTs] or fatigue [-0.57 (95% CI, -1.25 to 0.11; I² 34%, P = 0.100; n = 4 RCTs]. This systematic review included a small number of studies and reduced number of participants in each study. Furthermore, most of the studies showed some biases and lack of methodological quality. This meta-analysis indicates that there is low-quality evidence for the effectiveness of ES for pain relief in patients with FM. However, moderate-quality evidence for the effectiveness of electroacupuncture (EA), combined or not combined with other types of treatment, was found for pain relief. PROSPERO under the identification CRD42015025323Key words: Electric stimulation, electroacupuncture, transcutaneous electric nerve stimulation, pain, fibromyalgia, review, physical therapy, rehabilitation.

Destruction of dolines: the examples from Slovene karst

NASA Astrophysics Data System (ADS)

Kovacic, G.; Ravbar, N.

2012-04-01

Due to the absence of soil and flat agricultural land, in karst regions, the cultivation of doline bottoms and the clearing of stones on fields and meadows were traditional methods of adapting farming practices to the landscape with limited agricultural potential. In recent years, a variety of activities resulting from comprehensive economic and urban development have increased pressure on karst landscapes. In some areas the surface and the underground are increasingly threatened by industrial activities, uncontrolled settlement and spread of infrastructure, the development of tourism, and intensive agrarian land use. Unsupervised human encroachment on karst landscapes is causing the increasingly more frequent and more widespread degradation of karst relief forms. The intensive reshaping of the landscape has expanded beyond control largely as a result of technological development and mechanization. The excessive modern filling of dolines, as one of the most distinctive karst surface features, has become a major encroachment on the environment for leveling purposes. Such kind of human influence affects the shape of karst features and the appearance of the landscape as well as the intensity of karst processes such as corrosion. Many dolines are filled with general and construction waste, which threatens the existence of unique habitats and quality of groundwater and consequently water supply. This contribution presents some cases of inappropriate management of karst landscape in Slovenia and examines the national legislative framework on spatial planning in karst regions. Unfortunately, in the current legislation, the standards and conditions for the protection of karst landscape characteristics (e.g. dolines) are loose and not fully elaborated. Principally, there are no uniform mechanisms to protect specific relief forms or for the adequate protection of karst. To a large extent, the preservation of the characteristic karst landscape is left to local communities that most often lack the necessary financial and professional resources to appropriately direct land use, and those dealing with spatial planning and land use have insufficient knowledge regarding the complexity of karst and its vulnerability. The unique karst relief with various types, shapes and dimensions of dolines is usually considered only as an obstacle for faster local spatial development (e.g. building of industrial zones, traffic infrastructure, settlements, etc.) by decision makers, planners and construction engineers. Therefore, dolines are extremely susceptible to human impacts, which has to be considered in spatial planning in karst in order to preserve their natural value.

Multiscale 3D Shape Analysis using Spherical Wavelets

PubMed Central

Nain, Delphine; Haker, Steven; Bobick, Aaron; Tannenbaum, Allen

2013-01-01

Shape priors attempt to represent biological variations within a population. When variations are global, Principal Component Analysis (PCA) can be used to learn major modes of variation, even from a limited training set. However, when significant local variations exist, PCA typically cannot represent such variations from a small training set. To address this issue, we present a novel algorithm that learns shape variations from data at multiple scales and locations using spherical wavelets and spectral graph partitioning. Our results show that when the training set is small, our algorithm significantly improves the approximation of shapes in a testing set over PCA, which tends to oversmooth data. PMID:16685992

Multiscale 3D shape analysis using spherical wavelets.

PubMed

Nain, Delphine; Haker, Steven; Bobick, Aaron; Tannenbaum, Allen R

2005-01-01

Shape priors attempt to represent biological variations within a population. When variations are global, Principal Component Analysis (PCA) can be used to learn major modes of variation, even from a limited training set. However, when significant local variations exist, PCA typically cannot represent such variations from a small training set. To address this issue, we present a novel algorithm that learns shape variations from data at multiple scales and locations using spherical wavelets and spectral graph partitioning. Our results show that when the training set is small, our algorithm significantly improves the approximation of shapes in a testing set over PCA, which tends to oversmooth data.

Thermal-capillary analysis of small-scale floating zones Steady-state calculations

NASA Technical Reports Server (NTRS)

Duranceau, J. L.; Brown, R. A.

1986-01-01

Galerkin finite element analysis of a thermal-capillary model of the floating zone crystal growth process is used to predict the dependence of molten zone shape on operating conditions for the growth of small silicon boules. The model accounts for conduction-dominated heat transport in the melt, feed rod and growing crystal and for radiation between these phases, the ambient and a heater. Surface tension acting on the shape of the melt/gas meniscus counteracts gravity to set the shape of the molten zone. The maximum diameter of the growing crystal is set by the dewetting of the melt from the feed rod when the crystal radius is large. Calculations with small Bond number show the increased zone lengths possible for growth in a microgravity environment. The sensitivity of the method to the shape and intensity of the applied heating distribution is demonstrated. The calculations are compared with experimental observations.

CPW-fed Circularly Polarized Slot Antenna with Small Gap and Stick-shaped Shorted Strip for UHF FRID Readers

NASA Astrophysics Data System (ADS)

Pan, Chien-Yuan; Su, Chum-Chieh; Yang, Wei-Lin

2018-04-01

A new circularly polarized (CP) slot antenna with a small gap and a stick-shaped shorted strip is presented. The proposed antenna has a sufficient bandwidth for ultrahigh frequency (UHF) radio-frequency identification (RFID) reader applications. The antenna structure consists of a rectangular slot with a small gap, a stick-shaped shorted strip and a 50 Ω coplanar waveguide (CPW) feedline with an asymmetrical ground plane. By using the stick -shaped shorted strip to disturb magnetic current distribution on the slot, the CP radiation can be generated. The measured results demonstrate that the proposed antenna can reach a 10 dB return loss impedance bandwidth of 14.1 % (894-1030 MHz) and a 3 dB axial ratio (AR) bandwidth of 6.4 % (910-970 MHz). The whole antenna size is 80 × 80 × 1.6 mm3.

Endoscopic or surgical intervention for painful obstructive chronic pancreatitis.

PubMed

Ahmed Ali, Usama; Pahlplatz, Johanna M; Nealon, Wiliam H; van Goor, Harry; Gooszen, Hein G; Boermeester, Marja A

2012-01-18

Endoscopy and surgery are the treatment modalities of choice in patients with obstructive chronic pancreatitis. Physicians face the decision between endoscopy and surgery for this group of patients, without clear consensus. To assess and compare the effectiveness and complications of surgical and endoscopic interventions in the management of pain for obstructive chronic pancreatitis. We searched The Cochrane Library, MEDLINE, EMBASE and the Conference Proceedings Citation Index; and performed a cross-reference search. Two review authors performed the selection of trials independently. All randomised controlled trials (RCTs) investigating endoscopic or surgical interventions for obstructive chronic pancreatitis. All trials were included irrespective of blinding, number of patients randomised and language of the article. Two authors independently extracted data from the articles. The methodological quality of included trials was evaluated. Authors were requested additional information in the case of missing data. We screened 2082 publications and identified three eligible trials. Two trials compared endoscopic intervention to surgical intervention. These included a total of 111 patients, 55 in the endoscopic group and 56 in the surgical group. A higher proportion of patients with pain relief was found in the surgical group compared to the endoscopic group (partial or complete pain relief: RR 1.62, 95% confidence interval (CI) 1.11 to 2.37; complete pain relief: RR 2.45, 95% CI 1.18 to 5.09). Surgical intervention resulted in improved quality of life and improved preservation of exocrine pancreatic function in one trial. The number of patients did not allow for a reliable evaluation of morbidity and mortality between the two treatment modalities. One trial compared surgical intervention to conservative treatment. It included 32 patients: 17 in the surgical group and 15 in the conservative group. The trial showed that surgical intervention resulted in a higher percentage of patients with pain relief and better preservation of pancreatic function. The trial had methodological limitations and the number of patients was relatively small. For patients with obstructive chronic pancreatitis and dilated pancreatic duct, this review showed that surgery is superior to endoscopy in terms of pain control. Morbidity and mortality seemed not to differ between the two intervention modalities, but the small trials identified do not provide sufficient power to detect the small differences expected in this outcome.Regarding the comparison of surgical intervention versus conservative treatment, this review has shown that surgical intervention in an early stage of chronic pancreatitis seems to be a promising approach in terms of pain control and pancreatic function. Confirmation of these results is needed in other trials due to the methodological limitations and limited number of patients of the present evidence.

Learning by Starch Potato Growers: Learning in Small Businesses with No Employees

ERIC Educational Resources Information Center

Faber, Niels R.; Maruster, Laura; Jorna, Rene J.; van Haren, Rob J. F.

2012-01-01

In small businesses with no employees, learning environments have a low learning readiness. Consequently, learners need to rely on their own agency to shape their learning experiences. Results from a study of agricultural entrepreneurs indicated that the components of motivation and self-regulated learning strategies shape learner's agency and…

Aging and the haptic perception of 3D surface shape.

PubMed

Norman, J Farley; Kappers, Astrid M L; Beers, Amanda M; Scott, A Kate; Norman, Hideko F; Koenderink, Jan J

2011-04-01

Two experiments evaluated the ability of older and younger adults to perceive the three-dimensional (3D) shape of object surfaces from active touch (haptics). The ages of the older adults ranged from 64 to 84 years, while those of the younger adults ranged from 18 to 27 years. In Experiment 1, the participants haptically judged the shape of large (20 cm diameter) surfaces with an entire hand. In contrast, in Experiment 2, the participants explored the shape of small (5 cm diameter) surfaces with a single finger. The haptic surfaces varied in shape index (Koenderink, Solid shape, 1990; Koenderink, Image and Vision Computing, 10, 557-564, 1992) from -1.0 to +1.0 in steps of 0.25. For both types of surfaces (large and small), the participants were able to judge surface shape reliably. The older participants' judgments of surface shape were just as accurate and precise as those of the younger participants. The results of the current study demonstrate that while older adults do possess reductions in tactile sensitivity and acuity, they nevertheless can effectively perceive 3D surface shape from haptic exploration.

Present and Future Surface Mass Budget of Small Arctic Ice Caps in a High Resolution Regional Climate Model

NASA Astrophysics Data System (ADS)

Mottram, Ruth; Langen, Peter; Koldtoft, Iben; Midefelt, Linnea; Hesselbjerg Christensen, Jens

2016-04-01

Globally, small ice caps and glaciers make a substantial contribution to sea level rise; this is also true in the Arctic. Around Greenland small ice caps are surprisingly important to the total mass balance from the island as their marginal coastal position means they receive a large amount of precipitation and also experience high surface melt rates. Since small ice caps and glaciers have had a disproportionate number of long-term monitoring and observational schemes in the Arctic, likely due to their relative accessibility, they can also be a valuable source of data. However, in climate models the surface mass balance contributions are often not distinguished from the main ice sheet and the presence of high relief topography is difficult to capture in coarse resolution climate models. At the same time, the diminutive size of marginal ice masses in comparison to the ice sheet makes modelling their ice dynamics difficult. Using observational data from the Devon Ice Cap in Arctic Canada and the Renland Ice Cap in Eastern Greenland, we assess the success of a very high resolution (~5km) regional climate model, HIRHAM5 in capturing the surface mass balance (SMB) of these small ice caps. The model is forced with ERA-Interim and we compare observed mean SMB and the interannual variability to assess model performance. The steep gradient in topography around Renland is challenging for climate models and additional statistical corrections are required to fit the calculated surface mass balance to the high relief topography. Results from a modelling experiment at Renland Ice Cap shows that this technique produces a better fit between modelled and observed surface topography. We apply this statistical relationship to modelled SMB on the Devon Ice Cap and use the long time series of observations from this glacier to evaluate the model and the smoothed SMB. Measured SMB values from a number of other small ice caps including Mittivakkat and A.P. Olsen ice cap are also compared with model output. Finally we use climate simulations forced with two different RCP scenarios to examine the likely future evolution of SMB over these small ice masses.

Inventory of wetland habitat using remote sensing for the proposed Oahe irrigation unit in eastern South Dakota

NASA Technical Reports Server (NTRS)

Best, R. G.; Moore, D. G.; Myers, V. I.

1977-01-01

An inventory of wetlands for the area included in the proposed Oahe irrigation project was conducted to provide supplemental data for the wildlife mitigation plan. Interpretation techniques for inventoring small wetlands in the low relief terrain of the Lake Dakota Plain were documented and data summaries included. The data were stored and tabulated in a computerized spatial data analysis system.

A case of occipital neuralgia in the greater and lesser occipital nerves treated with neurectomy by using transcranial Doppler sonography: technical aspects.

PubMed

Jung, Sang Jin; Moon, Seong Keun; Kim, Tae Young; Eom, Ki Seong

2011-03-01

Occipital neuralgia is usually defined as paroxysmal stabbing pain in the greater or lesser occipital nerve (GON or LON) distribution. In occipital neuralgia patients, surgical considerations are carefully taken into account if medical management is ineffective. However, identification of the occipital artery by palpation in patients with thick necks or small occipital arteries can be technically difficult. Therefore, we established a new technique using transcranial Doppler (TCD) sonography for more accurate and rapid identification. The patient was a 64-year-old man who had undergone C1-C3 screw fixation and presented with intractable stabbing pain in the bilateral GON and LON distributions. In cases in which pain management was performed using medication, physical therapy, nerve block, or radiofrequency thermocoagulation, substantial pain relief was not consistently achieved, and recurrence of pain was reported. Therefore, we performed occipital neurectomy of the bilateral GON and LON by using TCD sonography, which helped detect the greater occipital artery easily. After the operation, the patient's headache disappeared gradually, although he had discontinued all medication except antidepressants. We believe that this new technique of occipital neurectomy via a small skin incision performed using TCD sonography is easy and reliable, has a short operative time, and provides rapid pain relief.

A Case of Occipital Neuralgia in the Greater and Lesser Occipital Nerves Treated with Neurectomy by Using Transcranial Doppler Sonography: Technical Aspects

PubMed Central

Jung, Sang Jin; Moon, Seong Keun; Kim, Tae Young

2011-01-01

Occipital neuralgia is usually defined as paroxysmal stabbing pain in the greater or lesser occipital nerve (GON or LON) distribution. In occipital neuralgia patients, surgical considerations are carefully taken into account if medical management is ineffective. However, identification of the occipital artery by palpation in patients with thick necks or small occipital arteries can be technically difficult. Therefore, we established a new technique using transcranial Doppler (TCD) sonography for more accurate and rapid identification. The patient was a 64-year-old man who had undergone C1-C3 screw fixation and presented with intractable stabbing pain in the bilateral GON and LON distributions. In cases in which pain management was performed using medication, physical therapy, nerve block, or radiofrequency thermocoagulation, substantial pain relief was not consistently achieved, and recurrence of pain was reported. Therefore, we performed occipital neurectomy of the bilateral GON and LON by using TCD sonography, which helped detect the greater occipital artery easily. After the operation, the patient's headache disappeared gradually, although he had discontinued all medication except antidepressants. We believe that this new technique of occipital neurectomy via a small skin incision performed using TCD sonography is easy and reliable, has a short operative time, and provides rapid pain relief. PMID:21390179

Advanced optical system for scanning-spot photorefractive keratectomy (PRK)

NASA Astrophysics Data System (ADS)

Mrochen, Michael; Wullner, Christian; Semchishen, Vladimir A.; Seiler, Theo

1999-06-01

Purpose: The goal of this presentation is to discuss the use of the Light Shaping Beam Homogenizer in an optical system for scanning-spot PRK. Methods: The basic principle of the LSBH is the transformation of any incident intensity distribution by light scattering on an irregular microlens structure z = f(x,y). The relief of this microlens structure is determined by a defined statistical function, i.e. it is defined by the mean root-squared tilt σ of the surface relief. Therefore, the beam evolution after the LSBH and in the focal plane of an imaging lens was measured for various root-squared tilts. Beside this, an optical setup for scanning-spot PRK was assembled according to the theoretical and experimental results. Results: The divergence, homogeneity and the Gaussian radius of the intensity distribution in the treatment plane of the scanning-spot PRK laser system is mainly characterized by dependent on root-mean-square tilt σ of the LSBH, as it will be explained by the theoretical description of the LSBH. Conclusions: The LSBH represents a simple, low cost beam homogenizer with low energy losses, for scanning-spot excimer laser systems.

Anisotropy in Ostwald ripening and step-terraced surface formation on GaAs(0 0 1): Experiment and Monte Carlo simulation

NASA Astrophysics Data System (ADS)

Kazantsev, D. M.; Akhundov, I. O.; Shwartz, N. L.; Alperovich, V. L.; Latyshev, A. V.

2015-12-01

Ostwald ripening and step-terraced morphology formation on the GaAs(0 0 1) surface during annealing in equilibrium conditions are investigated experimentally and by Monte Carlo simulation. Fourier and autocorrelation analyses are used to reveal surface relief anisotropy and provide information about islands and pits shape and their size distribution. Two origins of surface anisotropy are revealed. At the initial stage of surface smoothing, crystallographic anisotropy is observed, which is caused presumably by the anisotropy of surface diffusion at GaAs(0 0 1). A difference of diffusion activation energies along [1 1 0] and [1 1 bar 0] axes of the (0 0 1) face is estimated as ΔEd ≈ 0.1 eV from the comparison of experimental results and simulation. At later stages of surface smoothing the anisotropy of the surface relief is determined by the vicinal steps direction. At the initial stage of step-terraced morphology formation the kinetics of monatomic islands and pits growth agrees with the Ostwald ripening theory. At the final stage the size of islands and pits decreases due to their incorporation into the forming vicinal steps.

Contact geometry and mechanics predict friction forces during tactile surface exploration.

PubMed

Janko, Marco; Wiertlewski, Michael; Visell, Yon

2018-03-20

When we touch an object, complex frictional forces are produced, aiding us in perceiving surface features that help to identify the object at hand, and also facilitating grasping and manipulation. However, even during controlled tactile exploration, sliding friction forces fluctuate greatly, and it is unclear how they relate to the surface topography or mechanics of contact with the finger. We investigated the sliding contact between the finger and different relief surfaces, using high-speed video and force measurements. Informed by these experiments, we developed a friction force model that accounts for surface shape and contact mechanical effects, and is able to predict sliding friction forces for different surfaces and exploration speeds. We also observed that local regions of disconnection between the finger and surface develop near high relief features, due to the stiffness of the finger tissues. Every tested surface had regions that were never contacted by the finger; we refer to these as "tactile blind spots". The results elucidate friction force production during tactile exploration, may aid efforts to connect sensory and motor function of the hand to properties of touched objects, and provide crucial knowledge to inform the rendering of realistic experiences of touch contact in virtual reality.

Diffraction efficiency of plasmonic gratings fabricated by electron beam lithography using a silver halide film

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sudheer,, E-mail: sudheer@rrcat.gov.in, E-mail: sudheer.rrcat@gmail.com; Tiwari, P.; Srivastava, Himanshu

2016-07-28

The silver nanoparticle surface relief gratings of ∼10 μm period are fabricated using electron beam lithography on the silver halide film substrate. Morphological characterization of the gratings shows that the period, the shape, and the relief depth in the gratings are mainly dependent on the number of lines per frame, the spot size, and the accelerating voltage of electron beam raster in the SEM. Optical absorption of the silver nanoparticle gratings provides a broad localized surface plasmon resonance peak in the visible region, whereas the intensity of the peaks depends on the number density of silver nanoparticles in the gratings. Themore » maximum efficiency of ∼7.2% for first order diffraction is observed for the grating fabricated at 15 keV. The efficiency is peaking at 560 nm with ∼380 nm bandwidth. The measured profiles of the diffraction efficiency for the gratings are found in close agreement with the Raman-Nath diffraction theory. This technique provides a simple and efficient method for the fabrication of plasmonic nanoparticle grating structures with high diffraction efficiency having broad wavelength tuning.« less

Small intestinal model for electrically propelled capsule endoscopy

PubMed Central

2011-01-01

The aim of this research is to propose a small intestine model for electrically propelled capsule endoscopy. The electrical stimulus can cause contraction of the small intestine and propel the capsule along the lumen. The proposed model considered the drag and friction from the small intestine using a thin walled model and Stokes' drag equation. Further, contraction force from the small intestine was modeled by using regression analysis. From the proposed model, the acceleration and velocity of various exterior shapes of capsule were calculated, and two exterior shapes of capsules were proposed based on the internal volume of the capsules. The proposed capsules were fabricated and animal experiments were conducted. One of the proposed capsules showed an average (SD) velocity in forward direction of 2.91 ± 0.99 mm/s and 2.23 ± 0.78 mm/s in the backward direction, which was 5.2 times faster than that obtained in previous research. The proposed model can predict locomotion of the capsule based on various exterior shapes of the capsule. PMID:22177218

Distributed subterranean exploration and mapping with teams of UAVs

NASA Astrophysics Data System (ADS)

Rogers, John G.; Sherrill, Ryan E.; Schang, Arthur; Meadows, Shava L.; Cox, Eric P.; Byrne, Brendan; Baran, David G.; Curtis, J. Willard; Brink, Kevin M.

2017-05-01

Teams of small autonomous UAVs can be used to map and explore unknown environments which are inaccessible to teams of human operators in humanitarian assistance and disaster relief efforts (HA/DR). In addition to HA/DR applications, teams of small autonomous UAVs can enhance Warfighter capabilities and provide operational stand-off for military operations such as cordon and search, counter-WMD, and other intelligence, surveillance, and reconnaissance (ISR) operations. This paper will present a hardware platform and software architecture to enable distributed teams of heterogeneous UAVs to navigate, explore, and coordinate their activities to accomplish a search task in a previously unknown environment.

Sediment Concentration and Its Relation to Catchment Characteristics in Forested Headwater Streams of the Sierra Nevada, California

NASA Astrophysics Data System (ADS)

Wagenbrenner, J.; Safeeq, M.; Hunsaker, C. T.

2017-12-01

Sediment yields are highly variable and controlled by multiple topographic, geomorphic, and hydrologic factors that make its generalization or prediction challenging. We examined the characteristics of sediment concentration across ten headwater catchments located in the Kings River Experimental Watersheds, Sierra Nevada, California. Study catchments ranged from 50 to 475 ha and spanned from 1,782 to 2,373 m in elevation in the rain-snow transition zone. Mean annual streamflow ranged from 281 to 408 mm in the low elevation Providence and 436 to 656 mm in the high elevation Bull catchments. We measured suspended sediment concentration (SSC) and bedload sediment yield from 2004-2016. We related these outputs to catchment mean elevation, relief, slope, and drainage density as natural controls and runoff ratio, baseflow index, recession constant, and slope of the flow duration curve as hydrologic controls. The SSC were higher in the high elevation Bull catchments (64 ± 34 mg L-1) as compared to low elevation Providence catchments (30 ± 17 mg L-1). Measured SSC in both Bull and Providence declined with increasing catchment mean elevation (R > - 0.5). We found slope of the flow duration curve (R = 0.85) and recession constant (R = -0.91) as the two of best predictors of SSC in Providence. In Bull, drainage area (R = 0.87) and baseflow index (R = -0.78) were the two best predictors of SSC. The intercept and slope of the suspended sediment yield - discharge rating curve (SSY-Q) in Providence was positively related to catchment relief. In contrast, the SSY-Q intercept increased and SSY-Q slope declined with increasing relief in Bull. The mean annual bedload sediment yield varied between 0.4 Mg km-2 and 4.2 Mg km-2 across the ten watersheds, and bedload contributed a relatively small fraction to the total sediment load. Mean bedload sediment yields across the catchments were most associated with catchment slope and relief. These preliminary results provide insight on the dynamics of sediment yield and the natural range of variability in small headwater Sierra Nevada streams. These results can guide selection of appropriate predictor variables for catchment-scale sediment yield models that inform forest management.

Use of Verbal Descriptors, Thermal Scores and Electrical Pulp Testing Scores as Predictors of Tooth Pain Before and After Application of Benzocaine Gels into Cavities of Teeth with Pulpitis

PubMed Central

Gangarosa, Louis P.; Ciarlone, Alfred E.; Neaverth, Elmer J.; Johnston, Carey A.; Snowden, J. Douglas; Thompson, William O.

1989-01-01

A double-blind pilot study was conducted on 27 consenting human volunteers who had irreversible pulpitis associated with persistent toothache pain from open carious lesions. Formulations tested contained either 0, 10%, or 20% benzocaine and were identified only by a numbered code. Before the experiment started, a small amount of a known 5% benzocaine gel was placed for 1 minute on the tongue of each patient to assure a sensation of numbness within the oral cavity. Then the test tooth was washed with a gentle stream of warm water and dried with gauze. A randomly selected test medication was placed into the open cavity and around the gingival margins for 5 minutes. Pre- and posttreatment tests were conducted at the following timed intervals: 0, 5, 15, 30, 45, 60, 75 and 90 minutes. The tests included degree of pain (rated: 0 = none, 1 = mild, 2 = moderate, 3 = severe); electrical pulp testing (EPT) by a modified, voltage-ramping instrument; and ice water testing (0.5 mL directed quickly onto sound enamel of the tooth and rated: 0 to 4, with 4 being intolerable). After testing, or when pain returned to baseline, endodontic procedures were performed. There was a significant increase (p < 0.032, Fisher exact test) in subjects obtaining pain relief, rated by verbal descriptors, from the benzocaine gels (14 out of 18 improved) compared to placebo (3 out of 9 improved). It was concluded that: 1) benzocaine gels are effective formulations for temporary relief of toothache pain, 2) there were no statistical differences in EPT scores between teeth having pulpitis and control teeth, 3) there were no correlations between direction of EPT scores and pain relief, 4) cold water testing was a good predictor of whether or not a tooth had pulpitis, and 5) changes in cold water testing scores after treatment could not be correlated to relief of pain according to verbal descriptors. The effectiveness of benzocaine in relieving toothache pain verifies previous studies; however, a difference between 10% and 20% benzocaine could not be demonstrated probably because of two factors: 1) the present experiment had a small sample size, and 2) there was no direct measurement of duration of local anesthesia. PMID:2490060

Nonstationary plasma-thermo-fluid dynamics and transition in processes of deep penetration laser beam-matter interaction

NASA Astrophysics Data System (ADS)

Golubev, Vladimir S.; Banishev, Alexander F.; Azharonok, V. V.; Zabelin, Alexandre M.

1994-09-01

A qualitative analysis of the role of some hydrodynamic flows and instabilities by the process of laser beam-metal sample deep penetration interaction is presented. The forces of vapor pressure, melt surface tension and thermocapillary forces can determined a number of oscillatory and nonstationary phenomena in keyhole and weld pool. Dynamics of keyhole formation in metal plates has been studied under laser beam pulse effect ((lambda) equals 1.06 micrometers ). Velocities of the keyhole bottom motion have been determined at 0.5 X 105 - 106 W/cm2 laser power densities. Oscillatory regime of plate break- down has been found out. Small-dimensional structures with d-(lambda) period was found on the frozen cavity walls, which, in our opinion, can contribute significantly to laser beam absorption. A new form of periodic structure on the frozen pattern being a helix-shaped modulation of the keyhole walls and bottom relief has been revealed. Temperature oscillations related to capillary oscillations in the melt layer were discovered in the cavity. Interaction of the CW CO2 laser beam and the matter by beam penetration into a moving metal sample has been studied. The pulsed and thermodynamic parameters of the surface plasma were investigated by optical and spectroscopic methods. The frequencies of plasma jets pulsations (in 10 - 105 Hz range) are related to possible melt surface instabilities of the keyhole.

An approximate fluvial equilibrium topography for the Alps

NASA Astrophysics Data System (ADS)

Stüwe, K.; Hergarten, S.

2012-04-01

This contribution addresses the question whether the present topography of the Alps can be approximated by a fluvial equilibrium topography and whether this can be used to determine uplift rates. Based on a statistical analysis of the present topography we use a stream-power approach for erosion where the erosion rate is proportional to the square root of the catchment size for catchment sizes larger than 12 square kilometers and a logarithmic dependence to mimic slope processes at smaller catchment sizes. If we assume a homogeneous uplift rate over the entire region (block uplift), the best-fit fluvial equilibrium topography differs from the real topography by about 500 m RMS (root mean square) with a strong systematic deviation. Regions of low elevation are too high in the equilibrium topography, while high-mountain regions are too low. The RMS difference significantly decreases if a spatially variable uplift function is allowed. If a strong variation of the uplift rate on a scale of 5 km is allowed, the systematic deviation becomes rather small, and the RMS difference decreases to about 150 m. A significant part of the remaining deviation apparently arises from glacially-shaped valleys, while another part may result from prematurity of the relief (Hergarten, Wagner & Stüwe, EPSL 297:453, 2010). The best-fit uplift function can probably be used for forward or backward simulation of the landform evolution.

Geology of Pluto and Charon Overview

NASA Astrophysics Data System (ADS)

Moore, J. M.; Stern, A.; Weaver, H. A., Jr.; Young, L. A.; Ennico Smith, K.; Olkin, C.

2015-12-01

Pluto's surface was found to be remarkably diverse in terms of its range of landforms, terrain ages, and inferred geological processes. There is a latitudinal zonation of albedo. The conspicuous bright albedo heart-shaped feature informally named Tombaugh Regio is comprised of several terrain types. Most striking is Texas-sized Sputnik Planum, which is apparently level, has no observable craters, and is divided by polygons and ovoids bounded by shallow troughs. Small smooth hills are seen in some of the polygon-bounding troughs. These hills could either be extruded or exposed by erosion. Sputnik Planum polygon/ovoid formation hypotheses range from convection to contraction, but convection is currently favored. There is evidence of flow of plains material around obstacles. Mountains, especially those seen south of Sputnik Planum, exhibit too much relief to be made of CH4, CO, or N2, and thus are probably composed of H2O-ice basement material. The north contact of Sputnik Planum abuts a scarp, above which is heavily modified cratered terrain. Pluto's large moon Charon is generally heavily to moderately cratered. There is a mysterious structure in the arctic. Charon's surface is crossed by an extensive system of rift faults and graben. Some regions are smoother and less cratered, reminiscent of lunar maria. On such a plain are large isolated block mountains surrounded by moats. At this conference we will present highlights of the latest observations and analysis.

Applicability of ERTS for surveying Antarctic iceberg resources

NASA Technical Reports Server (NTRS)

Hult, J. L. (Principal Investigator); Ostrander, N. C.

1973-01-01

The author has identified the following significant results. Recognition and interpretation of icebergs proves to be easy when they are locked in sea or fast ice. They stand out in relief, particularly well in band 7. Recongition of isolated icebergs is much more difficult. Size, shape, interaction with sea ice, and change over time must then be used to help in positive identification. There seems to be much less current and relative motion between icebergs and sea in much of the test sector than had been believed from avialable exploration information. However, most of this type of assessment must await the accumulation and analysis of the full season data.

Navy Fan, California Borderland: Growth pattern and depositional processes

USGS Publications Warehouse

Normark, W.R.; Piper, D.J.W.

1984-01-01

Navy Fan is a Late Pleistocene sand-rich fan prograding into an irregularly shaped basin in the southern California Borderland. The middle fan, characterized by one active and two abandoned 'distributary' channels and associated lobe deposits, at present onlaps part of the basin slope directly opposite from the upper-fan valley, thus dividing the lower-fan/basin-plain regions into two separate parts of different depths. Fine-scale mesotopographic relief on the fan surface and correlation of individual turbidite beds through nearly 40 cores on the middle and lower fan provide data for evaluating the Late Pleistocene and Holocene depositional processes. ?? 1984 Springer-Verlag New York Inc.

46 CFR 64.59 - Spring loaded pressure relief valve.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Spring loaded pressure relief valve. 64.59 Section 64.59... AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.59 Spring loaded pressure relief valve. A spring loaded pressure relief valve must— (a) Be set at a nominal...

46 CFR 64.59 - Spring loaded pressure relief valve.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Spring loaded pressure relief valve. 64.59 Section 64.59... AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.59 Spring loaded pressure relief valve. A spring loaded pressure relief valve must— (a) Be set at a nominal...

46 CFR 64.59 - Spring loaded pressure relief valve.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 2 2011-10-01 2011-10-01 false Spring loaded pressure relief valve. 64.59 Section 64.59... AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.59 Spring loaded pressure relief valve. A spring loaded pressure relief valve must— (a) Be set at a nominal...

46 CFR 64.59 - Spring loaded pressure relief valve.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Spring loaded pressure relief valve. 64.59 Section 64.59... AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.59 Spring loaded pressure relief valve. A spring loaded pressure relief valve must— (a) Be set at a nominal...

46 CFR 64.59 - Spring loaded pressure relief valve.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Spring loaded pressure relief valve. 64.59 Section 64.59... AND CARGO HANDLING SYSTEMS Pressure Relief Devices and Vacuum Relief Devices for MPTs § 64.59 Spring loaded pressure relief valve. A spring loaded pressure relief valve must— (a) Be set at a nominal...

The relationships between residual stress relaxation and texture development in AZ31 Mg alloys via the vibratory stress relief technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jia-Siang, E-mail: andy304312003@yahoo.com.tw; Hsieh, Chih-Chun, E-mail: jeromehsieh@gmail.com; Lai, Hsuan-Han, E-mail: g099066020@mail.nchu.edu.tw

2015-01-15

A systematic study of residual stress relaxation and the texture evolution of cold-rolled AZ31 Mg alloys using the vibratory stress relief technique with a simple cantilever beam vibration system was performed using a high-resolution X-ray diffractometer and a portable X-ray residual stress analyzer. The effects of vibrational stress excitation on the surface residual stress distribution and on the texture of pole figures (0002) occurring during the vibratory stress relief were examined. Compared with the effects corresponding to the same alloy under non-vibration condition, it can be observed that the uniform surface residual stress distribution and relaxation of the compressive residualmore » stress in the stress concentration zone were observed rather than all of the residual stresses being eliminated. Furthermore, with an increase in the vibrational aging time, the compressive residual stress, texture density, and (0002) preferred orientation increased first and then decreased. It should be underlined that the vibratory stress relief process for the vibrational aging time of more than 10 min is able to weaken the strong basal textures of AZ31 Mg alloys, which is valuable for enhancement of their formability and is responsible for an almost perfect 3D-Debye–Scherrer ring. - Highlights: • 3D-Debye ring about VSR technique is not discussed in the existing literature. • A newly developed VSR method is suitable for small or thin workpieces. • The cosα method accurately and effectively determines the residual stresses. • The VSR technique is valuable for enhancement of their formability. • The texture and preferred orientation change with the vibrational aging time.« less

Automated classification of tropical shrub species: a hybrid of leaf shape and machine learning approach

PubMed Central

Murat, Miraemiliana; Abu, Arpah; Yap, Hwa Jen; Yong, Kien-Thai

2017-01-01

Plants play a crucial role in foodstuff, medicine, industry, and environmental protection. The skill of recognising plants is very important in some applications, including conservation of endangered species and rehabilitation of lands after mining activities. However, it is a difficult task to identify plant species because it requires specialized knowledge. Developing an automated classification system for plant species is necessary and valuable since it can help specialists as well as the public in identifying plant species easily. Shape descriptors were applied on the myDAUN dataset that contains 45 tropical shrub species collected from the University of Malaya (UM), Malaysia. Based on literature review, this is the first study in the development of tropical shrub species image dataset and classification using a hybrid of leaf shape and machine learning approach. Four types of shape descriptors were used in this study namely morphological shape descriptors (MSD), Histogram of Oriented Gradients (HOG), Hu invariant moments (Hu) and Zernike moments (ZM). Single descriptor, as well as the combination of hybrid descriptors were tested and compared. The tropical shrub species are classified using six different classifiers, which are artificial neural network (ANN), random forest (RF), support vector machine (SVM), k-nearest neighbour (k-NN), linear discriminant analysis (LDA) and directed acyclic graph multiclass least squares twin support vector machine (DAG MLSTSVM). In addition, three types of feature selection methods were tested in the myDAUN dataset, Relief, Correlation-based feature selection (CFS) and Pearson’s coefficient correlation (PCC). The well-known Flavia dataset and Swedish Leaf dataset were used as the validation dataset on the proposed methods. The results showed that the hybrid of all descriptors of ANN outperformed the other classifiers with an average classification accuracy of 98.23% for the myDAUN dataset, 95.25% for the Flavia dataset and 99.89% for the Swedish Leaf dataset. In addition, the Relief feature selection method achieved the highest classification accuracy of 98.13% after 80 (or 60%) of the original features were reduced, from 133 to 53 descriptors in the myDAUN dataset with the reduction in computational time. Subsequently, the hybridisation of four descriptors gave the best results compared to others. It is proven that the combination MSD and HOG were good enough for tropical shrubs species classification. Hu and ZM descriptors also improved the accuracy in tropical shrubs species classification in terms of invariant to translation, rotation and scale. ANN outperformed the others for tropical shrub species classification in this study. Feature selection methods can be used in the classification of tropical shrub species, as the comparable results could be obtained with the reduced descriptors and reduced in computational time and cost. PMID:28924506

Automated classification of tropical shrub species: a hybrid of leaf shape and machine learning approach.

PubMed

Murat, Miraemiliana; Chang, Siow-Wee; Abu, Arpah; Yap, Hwa Jen; Yong, Kien-Thai

2017-01-01

Plants play a crucial role in foodstuff, medicine, industry, and environmental protection. The skill of recognising plants is very important in some applications, including conservation of endangered species and rehabilitation of lands after mining activities. However, it is a difficult task to identify plant species because it requires specialized knowledge. Developing an automated classification system for plant species is necessary and valuable since it can help specialists as well as the public in identifying plant species easily. Shape descriptors were applied on the myDAUN dataset that contains 45 tropical shrub species collected from the University of Malaya (UM), Malaysia. Based on literature review, this is the first study in the development of tropical shrub species image dataset and classification using a hybrid of leaf shape and machine learning approach. Four types of shape descriptors were used in this study namely morphological shape descriptors (MSD), Histogram of Oriented Gradients (HOG), Hu invariant moments (Hu) and Zernike moments (ZM). Single descriptor, as well as the combination of hybrid descriptors were tested and compared. The tropical shrub species are classified using six different classifiers, which are artificial neural network (ANN), random forest (RF), support vector machine (SVM), k-nearest neighbour (k-NN), linear discriminant analysis (LDA) and directed acyclic graph multiclass least squares twin support vector machine (DAG MLSTSVM). In addition, three types of feature selection methods were tested in the myDAUN dataset, Relief, Correlation-based feature selection (CFS) and Pearson's coefficient correlation (PCC). The well-known Flavia dataset and Swedish Leaf dataset were used as the validation dataset on the proposed methods. The results showed that the hybrid of all descriptors of ANN outperformed the other classifiers with an average classification accuracy of 98.23% for the myDAUN dataset, 95.25% for the Flavia dataset and 99.89% for the Swedish Leaf dataset. In addition, the Relief feature selection method achieved the highest classification accuracy of 98.13% after 80 (or 60%) of the original features were reduced, from 133 to 53 descriptors in the myDAUN dataset with the reduction in computational time. Subsequently, the hybridisation of four descriptors gave the best results compared to others. It is proven that the combination MSD and HOG were good enough for tropical shrubs species classification. Hu and ZM descriptors also improved the accuracy in tropical shrubs species classification in terms of invariant to translation, rotation and scale. ANN outperformed the others for tropical shrub species classification in this study. Feature selection methods can be used in the classification of tropical shrub species, as the comparable results could be obtained with the reduced descriptors and reduced in computational time and cost.

Polydispersity-Driven Block Copolymer Amphiphile Self-Assembly into Prolate-Spheroid Micelles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmitt, Andrew L.; Repollet-Pedrosa, Milton H.; Mahanthappa, Mahesh K.

The aqueous self-assembly behavior of polydisperse poly(ethylene oxide-b-1,4-butadiene-b-ethylene oxide) (OBO) macromolecular triblock amphiphiles is examined to discern the implications of continuous polydispersity in the hydrophobic block on the resulting aqueous micellar morphologies of otherwise monodisperse polymer surfactants. The chain length polydispersity and implicit composition polydispersity of these samples furnishes a distribution of preferred interfacial curvatures, resulting in dilute aqueous block copolymer dispersions exhibiting coexisting spherical and rod-like micelles with vesicles in a single sample with a O weight fraction, w{sub O}, of 0.18. At higher w{sub O} = 0.51-0.68, the peak in the interfacial curvature distribution shifts and we observemore » the formation of only American football-shaped micelles. We rationalize the formation of these anisotropically shaped aggregates based on the intrinsic distribution of preferred curvatures adopted by the polydisperse copolymer amphiphiles and on the relief of core block chain stretching by chain-length-dependent intramicellar segregation.« less

Magic C60 islands forming due to moiré interference between islands and substrate

NASA Astrophysics Data System (ADS)

Olyanich, D. A.; Mararov, V. V.; Utas, T. V.; Utas, O. A.; Gruznev, D. V.; Zotov, A. V.; Saranin, A. A.

2015-05-01

Recently proposed mechanism for self-organized formation of magic islands [Nat.Comm. 4(2013)1679] has received a new experimental confirmation. According to this mechanism, self-assembly is mediated by the moiré interference between an island and underlying substrate lattice. It was first detected at C60 island growth on In-adsorbed Si(111)√{ 3} ×√{ 3}-Au surface. Changing In adsorbate for Tl results in lowering the corrugations of the surface potential relief due to a greater surface metallization. This allows formation of the C60 arrays with novel moiré pattern. As a result, a new set of magic C60 islands is formed on Tl-adsorbed Au/Si(111) surface differing from that observed on In-adsorbed surface. For example, the 19-C60 magic island which has a non-compact boomerang shape on In-adsorbed Au/Si(111) surfaces adopts a shape of a regular hexagon on Tl-adsorbed surface.

Mineralogy maketh mountains: Granitic landscapes shaped by dissolution

NASA Astrophysics Data System (ADS)

Eggleton, Richard A.

2017-05-01

In tectonically quiet regions, the shape of the landscape is controlled by the erosion resistance of the rocks. Erosion largely depends on the release of particles from the weathering rock, which in turn requires a degree of dissolution of the more soluble grains. The rate of dissolution of the common rock forming minerals allows the construction of a numerical Rock Weatherability Scale (RWS) based on the rock's modal mineralogical analysis. Applied regionally to three granitic landscape regions of the Bega Valley of southern New South Wales, the Tate Batholith and Featherbed Volcanics of north Queensland, and granitoids in the Beaufort region of Victoria, the mean elevation of the larger plutons in each region correlates highly (r = 0.83-0.93) with their RWS. Variation in composition within a pluton also shows there is a clear connection between changes in RWS and relief within the pluton. From these results it is apparent that the landscape of such granitic terrains is determined very largely by mineral dissolution rates, with plagioclase composition and content being a major factor.

Iraq’s Debt Relief: Procedure and Potential Implications for International Debt Relief

DTIC Science & Technology

2008-10-02

Order Code RL33376 Iraq’s Debt Relief: Procedure and Potential Implications for International Debt Relief Updated October 2, 2008 Martin A. Weiss...4. TITLE AND SUBTITLE Iraq?s Debt Relief: Procedure and Potential Implications for International Debt Relief 5a. CONTRACT NUMBER 5b. GRANT NUMBER...b. ABSTRACT unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Iraq’s Debt Relief: Procedure

30 CFR 204.203 - What is the other relief option?

Code of Federal Regulations, 2010 CFR

2010-07-01

... MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES Accounting and Auditing Relief § 204.203 What is the other relief option? (a) Under this relief option, you may request any type of accounting and auditing relief...

Modes of development of slope canyons and their relation to channel and levee features on the Ebro sediment apron, off-shore northeastern Spain

USGS Publications Warehouse

O'Connell, S.; Ryan, William B. F.; Normark, W.R.

1987-01-01

Six submarine slope canyons in an area of the northwestern Mediterranean, offshore from the Ebro River and Delta, were surveyed with bathymetric swathmapping (SeaBeam) and mid-range side-looking sonar (SeaMARC I). All of the canyons have slightly winding paths with concave-upwards gradients that are relatively steep shallower than 1,200 m. Two major types of canyons are identified on the basis of their morphologic character at the base of the slope; Type-I canyons lead to an unchannelled base-of-slope deposit and Type-II canyons are continuous with channel-levee systems that cross the rise. Four Type-I canyons were surveyed in the area. Two of these are broad, U-shaped, steep (average gradients of 1:14), do not indent the shelf, and terminate downslope at debris-flow deposits. These two canyons, the most northern in the area, have rounded heads with extensive gullies separated by knife-edge ridges. Relief of the canyon walls is about equal on both sides of the canyons, although the right-hand walls (looking downslope) are generally steeper. The other two Type-I canyons in the area are similar in that they do not indent the shelf, but they are much smaller and shallower and coalesce before terminating in the base-of-slope region. The two Type-II canyons that feed leveed-channels are U-shaped with flatter floors, longer profiles and gentler gradients than Type-I canyons. They are closer to the Valencia Valley and have relatively small cross-sectional areas. We propose a four-stage evolutionary sequence to explain the development of the canyons observed in this section on the prograding Ebro margin. During the initial stage, slumping and erosion on the slope creates a network of small gullies. During the next stage, headward growth of one (or more) gully leads to a major indentation of the shelf. This is the critical factor for developing a channel that will incise the slope and provide a major conduit for moving sediment to the basin. Stage 3 is characterized by the development of a continuous channel accompanied by levee growth across the lobe. In the final stage, the channel-levee system becomes inactive either through destruction by mass wasting, infilling of the channel, or loss of the major sediment source. ?? 1987.

Stochastic YORP On Real Asteroid Shapes

NASA Astrophysics Data System (ADS)

McMahon, Jay W.

2015-05-01

Since its theoretical foundation and subsequent observational verification, the YORP effect has been understood to be a fundamental process that controls the evolution of small asteroids in the inner solar system. In particular, the coupling of the YORP and Yarkovsky effects are hypothesized to be largely responsible for the transport of asteroids from the main belt to the inner solar system populations. Furthermore, the YORP effect is thought to lead to rotational fission of small asteroids, which leads to the creation of multiple asteroid systems, contact binary asteroids, and asteroid pairs. However recent studies have called into question the ability of YORP to produce these results. In particular, the high sensitivity of the YORP coefficients to variations in the shape of an asteroid, combined with the possibility of a changing shape due to YORP accelerated spin rates can combine to create a stochastic YORP coefficient which can arrest or change the evolution of a small asteroid's spin state. In this talk, initial results are presented from new simulations which comprehensively model the stochastic YORP process. Shape change is governed by the surface slopes on radar based asteroid shape models, where the highest slope regions change first. The investigation of the modification of YORP coefficients and subsequent spin state evolution as a result of this dynamically influenced shape change is presented and discussed.

Set size, individuation, and attention to shape

PubMed Central

Cantrell, Lisa; Smith, Linda B.

2013-01-01

Much research has demonstrated a shape bias in categorizing and naming solid objects. This research has shown that when an entity is conceptualized as an individual object, adults and children attend to the object’s shape. Separate research in the domain of numerical cognition suggest that there are distinct processes for quantifying small and large sets of discrete items. This research shows that small set discrimination, comparison, and apprehension is often precise for 1–3 and sometimes 4 items; however, large numerosity representation is imprecise. Results from three experiments suggest a link between the processes for small and large number representation and the shape bias in a forced choice categorization task using naming and non-naming procedures. Experiment 1 showed that adults generalized a newly learned name for an object to new instances of the same shape only when those instances were presented in sets of less than 3 or 4. Experiment 2 showed that preschool children who were monolingual speakers of three different languages were also influenced by set size when categorizing objects in sets. Experiment 3 extended these results and showed the same effect in a non-naming task and when the novel noun was presented in a count-noun syntax frame. The results are discussed in terms of a relation between the precision of object representation and the precision of small and large number representation. PMID:23167969

Set size, individuation, and attention to shape.

PubMed

Cantrell, Lisa; Smith, Linda B

2013-02-01

Much research has demonstrated a shape bias in categorizing and naming solid objects. This research has shown that when an entity is conceptualized as an individual object, adults and children attend to the object's shape. Separate research in the domain of numerical cognition suggest that there are distinct processes for quantifying small and large sets of discrete items. This research shows that small set discrimination, comparison, and apprehension is often precise for 1-3 and sometimes 4 items; however, large numerosity representation is imprecise. Results from three experiments suggest a link between the processes for small and large number representation and the shape bias in a forced choice categorization task using naming and non-naming procedures. Experiment 1 showed that adults generalized a newly learned name for an object to new instances of the same shape only when those instances were presented in sets of less than 3 or 4. Experiment 2 showed that preschool children who were monolingual speakers of three different languages were also influenced by set size when categorizing objects in sets. Experiment 3 extended these results and showed the same effect in a non-naming task and when the novel noun was presented in a count-noun syntax frame. The results are discussed in terms of a relation between the precision of object representation and the precision of small and large number representation. Copyright © 2012 Elsevier B.V. All rights reserved.

Near-terminator and earthshine photography. [special lunar photography obtained during Apollo 17 flight

NASA Technical Reports Server (NTRS)

Head, J. W.; Lloyd, D.

1973-01-01

Photographic results obtained during the Apollo 17 flight for the near terminator and earthshine conditions are discussed. Lunar surface photographs taken in the vicinity of the sunshine terminator provide important information that is not obtained on photographs taken at higher sun evaluation angles. Earthshine photography also provides data on low relief, crater morphology, and small scale structures. Examples of photographs of the lunar surface taken under both conditions are provided.

Professor, member of the Academy of (Medical) Sciences, Igor Dmitrievich Kirpatovsky and his scientific heritage

NASA Astrophysics Data System (ADS)

Kaitova, Z.; Smirnova, E.; Protasov, A.

2015-11-01

Academician Igor Dmitrievich Kirpatovsky created a scientific school at the Department of Operative Surgery at the Russian People's Friendship University. Unique studies have been conducted in various areas of medicine and science: vascular and abdominal surgery; microsurgery; traumatology and orthopedics; clinical anatomy and relief anatomy; nervous and endocrine transplantation; andrology transplantation; experiments in the area of renal transplantation, small intestine and limb transplantation; transplantation immunology.

Tectonic controls on rift basin morphology: Evolution of the northern Malawi (Nyasa) rift

NASA Technical Reports Server (NTRS)

Ebinger, C. J.; Deino, A. L.; Tesha, A. L.; Becker, T.; Ring, U.

1993-01-01

Radiometric (K-Ar and Ar-40/Ar-39) age determinations of volcanic and volcaniclastic rocks, combined with structural, gravity, and seismic reflection data, are used to constrain the age of sedimentary strata contained within the seismically and volcanically active northern Malawi (Nyasa) rift and to characterize changes in basin and flank morphologies with time. Faulting and volcanism within the Tukuyu-Karonga basin began at approximately 8.6 Ma, when sediments were deposited in abroad, initially asymmetric lake basin bounded on its northeastern side by a border fault system with minor topographic relief. Extensions, primarily by a slip along the border fault, and subsequent regional isostatic compensation led to the development of a 5-km-deep basin bounded by broad uplifted flanks. Along the low-relief basin margin opposite border fault, younger stratigraphic sequences commonly onlap older wedge-shaped sequences, although their internal geometry is often progradational. Intrabasinal faulting, flankuplift, and basaltic and felsic volcanism from centers at the northern end of the basin became more important at about 2.5 Ma when cross-rift transfer faults developed to link the Tukuyu-Karonga basin to the Rukwa basin. Local uplift and volcanic construction at the northern end of the basin led to a southeastward shift in the basin's depocenter. Sequence boundaries are commonly erosional along this low-relief (hanging wall) margin and conformable in the deep lake basin. The geometry of stratigraphic sequences and the distribution of the erosion indicate that horizontal and vertical crustal movements both across and along the length of the rift basin led to changes in levels of the lake, irrespective of paleoclimatic fluctuations.

Development and Beam-Shape Analysis of an Integrated Fiber-Optic Confocal Probe for High-Precision Central Thickness Measurement of Small-Radius Lenses

PubMed Central

Sutapun, Boonsong; Somboonkaew, Armote; Amarit, Ratthasart; Chanhorm, Sataporn

2015-01-01

This work describes a new design of a fiber-optic confocal probe suitable for measuring the central thicknesses of small-radius optical lenses or similar objects. The proposed confocal probe utilizes an integrated camera that functions as a shape-encoded position-sensing device. The confocal signal for thickness measurement and beam-shape data for off-axis measurement can be simultaneously acquired using the proposed probe. Placing the probe’s focal point off-center relative to a sample’s vertex produces a non-circular image at the camera’s image plane that closely resembles an ellipse for small displacements. We were able to precisely position the confocal probe’s focal point relative to the vertex point of a ball lens with a radius of 2.5 mm, with a lateral resolution of 1.2 µm. The reflected beam shape based on partial blocking by an aperture was analyzed and verified experimentally. The proposed confocal probe offers a low-cost, high-precision technique, an alternative to a high-cost three-dimensional surface profiler, for tight quality control of small optical lenses during the manufacturing process. PMID:25871720

Three-dimensional shape transformations of hydrogel sheets induced by small-scale modulation of internal stresses

NASA Astrophysics Data System (ADS)

Wu, Zi Liang; Moshe, Michael; Greener, Jesse; Therien-Aubin, Heloise; Nie, Zhihong; Sharon, Eran; Kumacheva, Eugenia

2013-03-01

Although Nature has always been a common source of inspiration in the development of artificial materials, only recently has the ability of man-made materials to produce complex three-dimensional (3D) structures from two-dimensional sheets been explored. Here we present a new approach to the self-shaping of soft matter that mimics fibrous plant tissues by exploiting small-scale variations in the internal stresses to form three-dimensional morphologies. We design single-layer hydrogel sheets with chemically distinct, fibre-like regions that exhibit differential shrinkage and elastic moduli under the application of external stimulus. Using a planar-to-helical three-dimensional shape transformation as an example, we explore the relation between the internal architecture of the sheets and their transition to cylindrical and conical helices with specific structural characteristics. The ability to engineer multiple three-dimensional shape transformations determined by small-scale patterns in a hydrogel sheet represents a promising step in the development of programmable soft matter.

Heart-Shaped Feature in Arabia Terra

NASA Image and Video Library

2011-02-14

This picture of a heart-shaped feature in Arabia Terra on Mars was taken on May 23, 2010, by NASA Mars Reconnaissance Orbiter. A small impact crater near the tip of the heart is responsible for the formation of the bright, heart-shaped feature.

Formation of bi-lobed 67P/C-G-like shapes by sub-catastrophic collisions

NASA Astrophysics Data System (ADS)

Jutzi, Martin; Benz, Willy

2016-10-01

Small bodies with a bi-lobe shape such as comet 67P/C-G have been argued to form as the result of low velocity (v ≈ vesc) collisional mergers of similar-sized bodies very early on in the history of the solar system [1]. However, the recent analysis of the subsequent collisional survival of the global structure and shape of comet 67P/C-G strongly suggests that such a structure will not survive until today [2]. Hence, the comet must have acquired its present characteristics as a result of a collision occurring at later time when the relative velocities between small bodies are much higher (v >> vesc).One possible scenario would be that 67P/C-G-like bi-lobe structures form as the result of collisional disruptions of larger parent bodies [3]. Whether the internal properties of such larger parent bodies, the timing of such a collision, and the subsequent survival of the shape produced is compatible with observations will remain to be seen.Here, we propose a scenario in which the final bi-lobe shapes result from low-energy, sub-catastrophic impacts. We start with bodies of about the same mass as comet 67P/C-G, which are rotating and are slightly elongated (i.e., with properties which are consistent with the outcome of the disruptions of larger bodies). We use a SPH shock physics code to model the impacts, the subsequent re-accumulation of material and the reconfiguration into a stable final shape. Our modelling results suggest that these kind of collisions result in "splitting" events which frequently lead to formation of bi-lobe 67P/C-G-like shapes.The frequency of such small-scale impact events is consistent with a young (less than 1 Gy) age of the shape of comet 67P/C-G [2]. Equally important, the probability for such a shape-forming event to take place without a subsequent shape-destroying event occurring until today is reasonably high.Although the collisions considered in this work can alter the global shape, their respective energy is small enough not to lead to any substantial global-scale heating or compaction, consistent with the observed primordial characteristics of comets.[1] Jutzi&Asphaug, 2015, Science 348. [2] Jutzi et al., submitted. [3] Schwartz et al., in prep.

Intra-accumbal blockade of endocannabinoid CB1 receptors impairs learning but not retention of conditioned relief.

PubMed

Bergado Acosta, Jorge R; Schneider, Miriam; Fendt, Markus

2017-10-01

Humans and animals are able to associate an environmental cue with the feeling of relief from an aversive event, a phenomenon called relief learning. Relief from an aversive event is rewarding and a relief-associated cue later induces an attenuation of the startle magnitude or approach behavior. Previous studies demonstrated that the nucleus accumbens is essential for relief learning. Here, we asked whether accumbal cannabinoid type 1 (CB1) receptors are involved in relief learning. In rats, we injected the CB1 receptor antagonist/inverse agonist SR141716A (rimonabant) directly into the nucleus accumbens at different time points during a relief learning experiment. SR141716A injections immediately before the conditioning inhibited relief learning. However, SR141716A injected immediately before the retention test was not effective when conditioning was without treatment. These findings indicate that accumbal CB1 receptors play an important role in the plasticity processes underlying relief learning. Copyright © 2017 Elsevier Inc. All rights reserved.

Brain activation related to the perception of minimal agency cues: the role of the mirror system.

PubMed

Stosic, Marina; Brass, Marcel; Van Hoeck, Nicole; Ma, Ning; Van Overwalle, Frank

2014-02-01

Recent fMRI studies indicate that the posterior superior temporal sulcus (pSTS) and the mirror system are involved in analyzing goal-directed actions performed by non-human objects. However, these studies have some limitations: the animations showed moving shapes that resemble humans and human movement, or showed the interaction of two moving shapes rather than one alone. This may have prompted participants to assume a human agent instead of an object. To avoid this potential confound, in this study, animations showed a small circular shape (agent) jumping toward a bigger circular shape (goal) with an obstacle separating them. We manipulated agency of the small circular shape by showing its movements as self-propelled (Agent condition) or as launched by a lever mechanism (Non-agent condition). The small shape succeeded in avoiding an obstacle and reaching the goal object or failed to do so. Our results showed that goal-directed actions performed by an agentic shape recruited the mirror system (the inferior parietal lobe and the premotor cortex) in comparison with shapes that were launched. Success or failure to avoid the obstacle had no effect on these areas. These results complement and further extend previous findings indicating that the mirror system does not appear to be selective for biological actions and their goals, nor does it require the presence of a human, human body parts or human-made objects. Instead, it seems to play a general role in representing goal-directed actions of agents regardless of their form. © 2013.

Particle shape inhomogeneity and plasmon-band broadening of solar-control LaB6 nanoparticles

NASA Astrophysics Data System (ADS)

Machida, Keisuke; Adachi, Kenji

2015-07-01

An ensemble inhomogeneity of non-spherical LaB6 nanoparticles dispersion has been analyzed with Mie theory to account for the observed broad plasmon band. LaB6 particle shape has been characterized using small-angle X-ray scattering (SAXS) and electron tomography (ET). SAXS scattering intensity is found to vary exponentially with exponent -3.10, indicating the particle shape of disk toward sphere. ET analysis disclosed dually grouped distribution of nanoparticle dispersion; one is large-sized at small aspect ratio and the other is small-sized with scattered high aspect ratio, reflecting the dual fragmentation modes during the milling process. Mie extinction calculations have been integrated for 100 000 particles of varying aspect ratio, which were produced randomly by using the Box-Muller method. The Mie integration method has produced a broad and smooth absorption band expanded towards low energy, in remarkable agreement with experimental profiles by assuming a SAXS- and ET-derived shape distribution, i.e., a majority of disks with a little incorporation of rods and spheres for the ensemble. The analysis envisages a high potential of LaB6 with further-increased visible transparency and plasmon peak upon controlled particle-shape and its distribution.

Karst connections between unconfined aquifers and the Upper Floridan aquifer in south Georgia: geophysical evidence and hydrogeological models

NASA Astrophysics Data System (ADS)

Thieme, D. M.; Denizman, C.

2011-12-01

Buried karst features in sedimentary rocks of the south Georgia Coastal Plain present a challenge for hydrogeological models of recharge and confined flow within the underlying Upper Floridan aquifer. The Withlacoochee River, the trunk stream for the area, frequently disappears into subsurface caverns as it makes its way south to join the Suwannee River in northern Florida. The Withlacoochee also receives inputs from small ponds and bays which in turn receive spring and seep groundwater inputs. We have mapped karst topography at the "top of rock" using ground-penetrating radar (GPR). Up to seven meters of relief is indicated for the paleotopography on Miocene to Pliocene rocks, contrasting with the more subdued relief of the modern landscape. Current stratigraphic and hydrogeological reconstructions do not incorporate this amount of relief or lateral variation in the confining beds. One "pipe" which is approximately four meters in diameter is being mapped in detail. We have field evidence at this location for rapid movement of surficial pond and river water with a meteoric signature through several separate strata of sedimentary rock into an aquifer in the Hawthorn formation. We use our geophysical and hydrological field evidence to constrain quantitative hydrogeological models for the flow rates into and out of both this upper aquifer and the underlying Upper Floridan aquifer, which is generally considered to be confined by the clays of the Hawthorn.

Andean subduction orogeny: feedbacks between tectonics, relief evolution and global climate

NASA Astrophysics Data System (ADS)

Lacassin, Robin; Armijo, Rolando; Coudurier-Curveur, Aurélie; Carrizo, Daniel

2016-04-01

The Andean subduction margin, largest tectonic relief on the Earth (13 km vertically from the trench to the Altiplano) has a stepped morphology, which results of the evolution over the past 50 Myr of two parallel flat-ramp thrust systems, at the - previously unidentified - West Andean Thrust (WAT), and at the subduction interface. The evolution of those thrusts appears concomitant with increasing aridity in the Atacama Desert, which keeps a large-scale record of interplaying tectonics and Cenozoic climate change. The coastal morphology is dominated by the Atacama Bench, a giant uplifted terrace at 1-2km asl. Geomorphic and climatic data, numerical experiments of drainage formation are consistent with the development of a flat Atacama morphology close to sea level, interrupted at ≤10 Ma by tectonic uplift prevailing to the present. This suggests recent trench-ward relief growth by incorporation of the coastal Atacama Bench to the Andes reliefs. Thrust splay structures and other complexities above the subduction interface may explain this relief growth, as well as the distribution of asperities under the oceanward forearc, and the down-dip segmentation of coupling and seismicity on the megathrust. Combining those results with geological knowledge at the scale of the whole Central Andes, we show that the Andean orogeny results from protracted processes of bivergent crustal shortening in a wide region squeezed between the rigid Marginal Block and the S America Plate. The overall growth curve of Andean orogeny over the past 50 Myr appears synchronous with the onset of the "ramp-shaped" temperature decrease since the Early Eocene climatic optimum. Andean growth and global cooling may have operated under the same forcing mechanism at plate-scale, involving viscous flow in the mantle. But Andean growth appears modulated by climatic feedbacks causative of stepwise reductions of erosive power over the Andean margin. The first of such events is coeval with Late Eocene cooling and promoted the eastward propagation of deformation towards the continent interior. The second one, coeval with Late Miocene cooling, is associated with the establishment of hyper-aridity in the Atacama Desert, and is responsible of a tectonic "freezing" which promoted since the triggering of subduction of the Brazilian craton, the Andean bivergent growth, and rapid uplift throughout the Andes-Altiplano. Armijo R., Lacassin R., Coudurier-Curveur A., Carrizo D., Coupled tectonic evolution of Andean orogeny and global climate, Earth Science Reviews, 143, 1-35, doi:10.1016/j.earscirev.2015.01.005, 2015.

A novel design of membrane mirror with small deformation and imaging performance analysis in infrared system

NASA Astrophysics Data System (ADS)

Zhang, Shuqing; Wang, Yongquan; Zhi, Xiyang

2017-05-01

A method of diminishing the shape error of membrane mirror is proposed in this paper. The inner inflating pressure is considerably decreased by adopting the pre-shaped membrane. Small deformation of the membrane mirror with greatly reduced shape error is sequentially achieved. Primarily a finite element model of the above pre-shaped membrane is built on the basis of its mechanical properties. Then accurate shape data under different pressures can be acquired by iteratively calculating the node displacements of the model. Shape data are applicable to build up deformed reflecting surfaces for the simulative analysis in ZEMAX. Finally, ground-based imaging experiments of 4-bar targets and nature scene are conducted. Experiment results indicate that the MTF of the infrared system can reach to 0.3 at a high spatial resolution of 10l p/mm, and texture details of the nature scene are well-presented. The method can provide theoretical basis and technical support for the applications in lightweight optical components with ultra-large apertures.

Vortex distribution in small star-shaped Mo80Ge20 plate

NASA Astrophysics Data System (ADS)

Vu, The Dang; Matsumoto, Hitoshi; Miyoshi, Hiroki; Huy, Ho Thanh; Shishido, Hiroaki; Kato, Masaru; Ishida, Takekazu

2017-02-01

We investigated vortex states in small star-shaped Mo80Ge20 plates both theoretically and experimentally. The numerical calculations of the Ginzburg-Landau equation have been carried out with the aid of the finite element method, which is convenient to treat an arbitrarily shaped superconductor. The experimental results were observed by using a scanning SQUID microscope. Through systematic measurements, we figured out how vortices form symmetric configuration with increasing the magnetic field. The vortex distribution tends to adapt to one of five mirror symmetric lines when vortices were located at the five triangular horns of a star-shaped plate. The crystalline homogeneity of a sample was confirmed by the X-ray diffraction and the superconducting properties so that vortices are easily able to move for accommodating vortices in the geometric symmetry of the star-shaped plate. The experimental vortex configurations obtained for a star-shaped plate are in good agreement with theoretical predictions from the nonlinear Ginzburg-Landau equation.

Alternative medicine - pain relief

MedlinePlus

Acupuncture - pain relief; Hypnosis - pain relief; Guided imagery - pain relief ... forms of alternative medicine. Alternatives to medicines include acupuncture, chiropractic, massage, hypnosis, biofeedback, meditation, yoga, and tai- ...

30 CFR 204.201 - Who may obtain accounting and auditing relief?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Who may obtain accounting and auditing relief... MINERALS REVENUE MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES Accounting and Auditing Relief § 204.201 Who may obtain accounting and auditing relief? (a) You may obtain accounting and auditing relief under...

Feeling worse to feel better: pain-offset relief simultaneously stimulates positive affect and reduces negative affect.

PubMed

Franklin, Joseph C; Lee, Kent M; Hanna, Eleanor K; Prinstein, Mitchell J

2013-04-01

Although pain itself induces negative affect, the removal (or offset) of pain induces a powerful state of relief. Despite being implicated in a wide range of psychological and behavioral phenomena, relief remains a poorly understood emotion. In particular, some theorists associate relief with increased positive affect, whereas others associate relief with diminished negative affect. In the present study, we examined the affective nature of relief in a pain-offset paradigm with psychophysiological measures that were specific to negative valence (startle eyeblink reactivity) and positive valence (startle postauricular reactivity). Results revealed that pain offset simultaneously stimulates positive affect and diminishes negative affect for at least several seconds. Results also indicated that pain intensity differentially affects the positive and negative valence aspects of relief. These findings clarify the affective nature of relief and provide insight into why people engage in both normal and abnormal behaviors associated with relief.

Excitation of multiple surface-plasmon-polariton waves using a compound surface-relief grating

NASA Astrophysics Data System (ADS)

Faryad, Muhammad; Lakhtakia, Akhlesh

2012-01-01

The excitation of multiple surface-plasmon-polariton waves, all of the same frequency but different polarization states, phase speeds, spatial profiles and degrees of localization, by a compound surface-relief grating formed by a metal and a rugate filter, both of finite thickness, was studied using the rigorous coupled-wave approach. Each period of the compound surface-relief grating was chosen to have an integral number of periods of two different simple surface-relief gratings. The excitation of different SPP waves was inferred from the absorptance peaks that were independent of the thickness of the rugate filter. The excitation of each SPP wave could be attributed to either a simple surface-relief grating present in the compound surface-relief grating or to the compound surface-relief grating itself. However, the excitation of SPP waves was found to be less efficient with the compound surface-relief grating than with a simple surface-relief grating.

Shaping-lathe headrig will convert small hardwoods into pallet cants plus flakes for structural exterior flakeboard

Treesearch

Peter Koch

1975-01-01

Virtually all nations have an under-utilized resource of small-diameter, low-grade hardwoods of mixed species in a range of densities. The shaping-lathe headrig, now in the final stages of commercialization, is a key to utilizing these hardwoods for pallets, industrial lumber, and-with further development-railroad crossties. Lathe residues in the form of flakes can be...

Combining of both RPAS and GPR methods for documentation and verifying of archaeological objects

NASA Astrophysics Data System (ADS)

Pavelka, Karel; Šedina, Jaroslav

2015-04-01

UAV (unmanned aircraft vehicle) or RPAS (remote piloted aircraft systems) are a modern technology for non - contact mapping and monitoring small areas. Nowadays, for control and piloting, RPAS are equipped with sophisticated micro-instruments such as IMU, gyroscopes, GNSS receivers, wireless image insights, wireless controls, automatic stabilization, flight planners, etc. RPAS can provide not only photographic data, but also other data types like multispectral (with NDVI capability), thermal data too (depending on sensors and type). Bigger RPAS can be equipped with more complex and expensive instruments like laser scanners or hyperspectral scanners. The RPAS method of acquisition combines the benefits of close range and aerial photogrammetry. As a result, a higher resolution and mapping precision can be obtained over compact and possibly less accessible areas (e.g. mountains, moors, swamps, dumps, small natural reserves, archaeological areas and dangerous or restricted areas). In our project, many small archaeological places are monitored. It is low cost, simple, and speedy. From these photos, a DSM (digital surface model) and orthophoto can be derived, which are useful for archaeologists (DSM is often used in shaded relief form). Based on the type of processing software, a textured virtual model can be obtained. Near infrared photos from height 100-200m give a new possibility in archaeology. We used both RPAS and GPR methods in three case projects in the Czech Republic in 2014. 1.Historical field fortification In the neighbourhood of town Litoměřice, there are still visible ramparts from the Prussian - Austrian war in the 19th Century. This was a field forward fortification, but has never been used in battle and later disappeared because of agricultural activities. Some parts are detectable by their terrain signatures, visible on shaded DSMs. By the documentation and research of these relics, we measured profiles with GPR for verifying of parts, which were visible on near-infrared photos. The photographed area has about 50 hectares with a rectangular shape; the flight height was 130m, with a pixel size of 4cm. Both NIR and VIS cameras were used. 2.Unknown historical construction in landscape Near the small Lipany village is a probably medieval linear formation (mound), now hardly recognizable after several cultivations of the local fields. This mound was located using RPAS and verified by ground penetrating radar (SIR 3000). The results of GPR on pre defined areas from RPAS were very good. The photographed area has about 50 hectares with a very elongated rectangular shape 550x100m). 3.Possible newly detected archaeological objects Near the town of Louny, on the peninsula that forms the river Eger, photographing was performed using RPAS. On the infrared photographs, near the uncovered archaeological digs, new unknown objects have been detected. In the spring 2015, we will continue with the verification findings using GPR. The article will be focused on methods and results from above mentioned case projects.

A sigh of relief or a sigh of expected relief: Sigh rate in response to dyspnea relief.

PubMed

Vlemincx, Elke; Meulders, Michel; Luminet, Olivier

2018-02-01

Research has suggested that sighs may serve a regulatory function during stress and emotions by facilitating relief. Evidence supports the hypotheses that sighs both express and induce relief from stress. To explore the potential role of sighs in the regulation of symptoms, the present study aimed to investigate the relationship between sighs and relief of symptoms, and relief of dyspnea, specifically. Healthy volunteers participated in two studies (N = 44, N = 47) in which dyspnea was induced by mild (10 cmH 2 O/l/s) or high (20 cmH 2 0/l/s) inspiratory resistances. Dyspnea relief was induced by the offset of the inspiratory resistances (transitions from high and mild inspiratory resistance to no resistance). Control comparisons included dyspnea increases (transitions from no or mild inspiratory resistance to high inspiratory resistance) and dyspnea continuations (continuations of either no resistance or a high resistance). In Experiment 1, dyspnea levels were cued. In Experiment 2, no cues were provided. Sigh rate during dyspnea relief was significantly higher compared to control conditions, and sigh rate increased as self-reported dyspnea decreased. Additionally, sigh rate was higher during cued dyspnea relief compared to noncued dyspnea relief. These results suggest that sighs are important markers of dyspnea relief. Moreover, sighs may importantly express dyspnea relief, as they are related to experiential dyspnea decreases and occur more frequently during expected dyspnea relief. These findings suggest that sighs may not only be important in the regulation of stress and emotions, but also may be functional in the regulation of dyspnea. © 2017 Society for Psychophysiological Research.

Heart-Shaped Feature in Arabia Terra Wide View

NASA Image and Video Library

2011-02-14

This wide-view picture of a heart-shaped feature in Arabia Terra on Mars was taken on May 23, 2010, by NASA Mars Reconnaissance Orbiter. A small impact crater near the tip of the heart is responsible for the formation of the bright, heart-shaped feature

Systems Architecture of a Sea Base Surface Connector System in a 2020 Humanitarian Assistance/Disaster Relief Joint Operational Environment

DTIC Science & Technology

2010-09-01

groups; each group divided into multiple tribes and sub-tribes. The four main ethnic groups are the Hausa-Fulani, Yoruba , Igbo and Ijaw. Figure 41...major cities. The Hausa-Fulani dominate northern Nigeria and control Nigeria’s economic, military and political life. The Yoruba primarily reside in...2. Community and Ethnic Violence Nigeria has many cultures , constituting several different communities. Communities, from small villages to large

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2011 CFR

2011-10-01

... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as... 46 Shipping 2 2011-10-01 2011-10-01 false Method of performing mechanical stress relief. 54.30-10...

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Method of performing mechanical stress relief. 54.30-10... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as...

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 2 2014-10-01 2014-10-01 false Method of performing mechanical stress relief. 54.30-10... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as...

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 2 2013-10-01 2013-10-01 false Method of performing mechanical stress relief. 54.30-10... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as...

46 CFR 54.30-10 - Method of performing mechanical stress relief.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 2 2012-10-01 2012-10-01 false Method of performing mechanical stress relief. 54.30-10... PRESSURE VESSELS Mechanical Stress Relief § 54.30-10 Method of performing mechanical stress relief. (a) The mechanical stress relief shall be carried out in accordance with the following stipulations using water as...

46 CFR 154.806 - Capacity of pressure relief valves.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Capacity of pressure relief valves. 154.806 Section 154... Equipment Cargo Vent Systems § 154.806 Capacity of pressure relief valves. Pressure relief valves for each cargo tank must have a combined relief capacity, including the effects of back pressure from vent piping...

How absent negativity relates to affect and motivation: an integrative relief model.

PubMed

Deutsch, Roland; Smith, Kevin J M; Kordts-Freudinger, Robert; Reichardt, Regina

2015-01-01

The present paper concerns the motivational underpinnings and behavioral correlates of the prevention or stopping of negative stimulation - a situation referred to as relief. Relief is of great theoretical and applied interest. Theoretically, it is tied to theories linking affect, emotion, and motivational systems. Importantly, these theories make different predictions regarding the association between relief and motivational systems. Moreover, relief is a prototypical antecedent of counterfactual emotions, which involve specific cognitive processes compared to factual or mere anticipatory emotions. Practically, relief may be an important motivator of addictive and phobic behaviors, self destructive behaviors, and social influence. In the present paper, we will first provide a review of conflicting conceptualizations of relief. We will then present an integrative relief model (IRMO) that aims at resolving existing theoretical conflicts. We then review evidence relevant to distinctive predictions regarding the moderating role of various procedural features of relief situations. We conclude that our integrated model results in a better understanding of existing evidence on the affective and motivational underpinnings of relief, but that further evidence is needed to come to a more comprehensive evaluation of the viability of IRMO.

Novel diffraction gratings for next generation spectrographs with high spectral dispersion

NASA Astrophysics Data System (ADS)

Ebizuka, N.; Okamoto, T.; Hosobata, T.; Yamagata, Y.; Sasaki, M.; Uomoto, M.; Shimatsu, T.; Sato, S.; Hashimoto, N.; Tanaka, I.; Hattori, T.; Ozaki, S.; Aoki, W.

2016-07-01

As a transmission grating, a surface-relief (SR) grating with sawtooth shaped ridges and volume phase holographic (VPH) grating are widely used for instruments of astronomical observations. However the SR grating is difficult to achieve high diffraction efficiency at high angular dispersion, and the VPH grating has low diffraction efficiency in high diffraction orders. We propose novel gratings that solve these problems. We introduce the hybrid grism which combines a high refractive index prism with a replicated transmission grating, which has sawtooth shaped ridges of an acute apex angle. The birefringence VPH (B-VPH) grating which contains an anisotropic medium, such as a liquid crystal, achieves diffraction efficiency up to 100% at the first diffraction order for natural polarization and for circular polarization. The quasi-Bragg (QB) grating which consists of long rectangular mirrors aligned in parallel precisely, like a window blind, achieves diffraction efficiency of 60% or more in higher than the 4th diffraction order. The volume binary (VB) grating with narrow grooves also achieves diffraction efficiency of 60% or more in higher than the 6th diffraction order. The reflector facet transmission (RFT) grating which is a SR grating with sawtooth shaped ridges of an acute apex angle achieves diffraction efficiency up to 80% in higher than the 4th diffraction order.

The convergence of American and Nigerian religious conservatism in a biopolitical shaping of Nigeria's HIV/AIDS prevention programmes

PubMed Central

Jappah, Jlateh V.

2013-01-01

Nigeria has the largest number of HIV/AIDS cases in West Africa, with 3.3 million people estimated to be living with the disease. The country remains a fragile democratic state and has allocated insufficient resources to combat the spread of HIV/AIDS among its citizens. The preponderance of President's Emergency Plan for AIDS Relief (PEPFAR) dollars, expert knowledge, conservative ideology and activities has shaped the direction of HIV/AIDS sexual-transmission prevention programmes in Nigeria. PEPFAR channels significant resources through Nigerian faith-based organisations (FBOs), and considers these organisations integral for HIV prevention strategies. In many instances, HIV/AIDS prevention programmes managed by FBOs reflect their ideologies of morality and sexuality. There is a convergence of religious ideology concerning morality and HIV infectivity between American and Nigerian conservatives; this produces a fertile ground for the influence and expansion of the conservative activities of PEPFAR in Nigeria. The paper highlights this nexus and draws attention to the biopolitical underpinning of PEPFAR in shaping Nigeria's HIV prevention programmes. The paper further notes both positive and negative effects of PEPFAR activities and attempts by the Obama administration to redirect PEPFAR to a more holistic approach in order to optimise outcomes. PMID:23391163

The convergence of American and Nigerian religious conservatism in a biopolitical shaping of Nigeria's HIV/AIDS prevention programmes.

PubMed

Jappah, Jlateh V

2013-01-01

Nigeria has the largest number of HIV/AIDS cases in West Africa, with 3.3 million people estimated to be living with the disease. The country remains a fragile democratic state and has allocated insufficient resources to combat the spread of HIV/AIDS among its citizens. The preponderance of President's Emergency Plan for AIDS Relief (PEPFAR) dollars, expert knowledge, conservative ideology and activities has shaped the direction of HIV/AIDS sexual-transmission prevention programmes in Nigeria. PEPFAR channels significant resources through Nigerian faith-based organisations (FBOs), and considers these organisations integral for HIV prevention strategies. In many instances, HIV/AIDS prevention programmes managed by FBOs reflect their ideologies of morality and sexuality. There is a convergence of religious ideology concerning morality and HIV infectivity between American and Nigerian conservatives; this produces a fertile ground for the influence and expansion of the conservative activities of PEPFAR in Nigeria. The paper highlights this nexus and draws attention to the biopolitical underpinning of PEPFAR in shaping Nigeria's HIV prevention programmes. The paper further notes both positive and negative effects of PEPFAR activities and attempts by the Obama administration to redirect PEPFAR to a more holistic approach in order to optimise outcomes.

An efficient way of high-contrast, quasi-3D cellular imaging: off-axis illumination.

PubMed

Hostounský, Zdenĕk; Pelc, Radek

2006-07-31

An imaging system enabling a convenient visualisation of cells and other small objects is presented. It represents an adaptation of the optical microscope condenser, accommodating a built-in edge (relief) diaphragm brought close to the condenser iris diaphragm and enabling high-contrast pseudo-relief (quasi-3D) imaging. The device broadens the family of available apparatus based on the off-axis (or anaxial, asymmetric, inclined, oblique, schlieren-type, sideband) illumination. The simplicity of the design makes the condenser a user-friendly, dedicated device delivering high-contrast quasi-3D images of phase objects. Those are nearly invisible under the ordinary (axial) illumination. The phase contrast microscopy commonly used in visualisation of phase objects does not deliver the quasi-3D effect and introduces a disturbing 'halo' effect around the edges. The performance of the device presented here is demonstrated on living cells and tissue replicas. High-contrast quasi-3D images of cell-free preparations of biological origin (paper fibres and microcrystals) are shown as well.

Modern stromatolite reefs fringing a brackish coastline, Chetumal Bay, Belize

NASA Astrophysics Data System (ADS)

Rasmussen, Kenneth A.; MacIntyre, Ian G.; Prufert, Leslie

1993-03-01

Reef-forming stromatolites have been discovered along the windward shoreline of Chetumal Bay, Belize, just south of the mouth of the Rio Hondo. The reefs and surrounding sediment are formed by the precipitation of submicrocrystalline calcite upon the sheaths of filamentous cyanobacteria, principally Scytonema, under a seasonally fluctuating, generally brackish salinity regime (0‰10‰). Well-cemented, wave-resistant buttresses of coalesced stromatolite heads form arcuate or club-shaped reefs up to 42 m long and 1.5 m in relief that are partially emergent during low tide. Oncolitic rubble fields are present between well-developed reefs along the 1.5 km trend, which parallels the mangrove coastline 40-100 m offshore. The mode of reef growth, as illustrated by surface relief and internal structure, changes with increasing water depth and energy, proximity to bottom sediments, and dominant cyanobacterial taxa. Sediment trapping and binding by cyanobacteria are of limited importance to reef growth, and occur only where stromatolite heads or oncolites are in direct contact with the sandy sea floor. Radiocarbon-dated mangrove peat at the base of the reef suggests that it began to form about 2300 yr B.P., as shoreline encrustations that were stranded offshore following storm-induced retreat of the mangrove coast.

Neotectonic and Geomorphological Characteristics of the Ma Pi Leng Area (Ha Giang Province, North Vietnam): Implications for Improving the Worth of Vietnamese Geological Heritage

NASA Astrophysics Data System (ADS)

Van Bui, Thom; Huy Nguyen, Thinh; Duc Nguyen, Tung

2018-03-01

Ma Pi Leng area is the core part of Dong Van karst plateau geopark, and is a region of high diversity of geology and tectonics in Vietnam. This region has experienced strong uplift motions that have created three grades of regional relief: 1400-1600 m; 1100-1200 m and 500-600 m. This geomorphology is in turn strongly eroded by the stream systems and divided into different structural blocks controlled by the faults. During the neotectonic stage, several modes of faulting have occurred in Ma Pi Leng such as strikeslip, normal, extension, riverse faults. The NW-SE fault system had a decisive role in determining the structural pattern of the region. The tectonic fractures, at the largest scale, are hundreds of meters high and up to a kilometer long. Tectonic activities, together with exogenic processes, have made regional relief strongly diverse with strips of horsts and grabens as well as laddersteps-shaped escarpments, inverse topography, high cliffs and deep canyons. Besides that there are also the caves at varying levels of height, chains of sinkholes, and pyramidal mountainous peaks. Ma Pi Leng area is truly majestic and worthy of tourist attractions both in terms of scientific value and natural landscape.

Method for preparing corrosion-resistant ceramic shapes

DOEpatents

Arons, R.M.; Dusek, J.T.

1979-12-07

Ceramic shapes having impermeable tungsten coatings can be used for containing highly corrosive molten alloys and salts. The shapes are prepared by coating damp green ceramic shapes containing a small amount of yttria with a tungsten coating slip which has been adjusted to match the shrinkage rate of the green ceramic and which will fire to a theoretical density of at least 80% to provide an impermeable coating.

Method for preparing corrosion-resistant ceramic shapes

DOEpatents

Arons, Richard M.; Dusek, Joseph T.

1983-09-13

Ceramic shapes having impermeable tungsten coatings can be used for containing highly corrosive molten alloys and salts. The shapes are prepared by coating damp green ceramic shapes containing a small amount of yttria with a tungsten coating slip which has been adjusted to match the shrinkage rate of the green ceramic and which will fire to a theoretical density of at least 80% to provide a impermeable coating.

Relief as a Reward: Hedonic and Neural Responses to Safety from Pain

PubMed Central

Leknes, Siri; Lee, Michael; Berna, Chantal; Andersson, Jesper; Tracey, Irene

2011-01-01

Relief fits the definition of a reward. Unlike other reward types the pleasantness of relief depends on the violation of a negative expectation, yet this has not been investigated using neuroimaging approaches. We hypothesized that the degree of negative expectation depends on state (dread) and trait (pessimism) sensitivity. Of the brain regions that are involved in mediating pleasure, the nucleus accumbens also signals unexpected reward and positive prediction error. We hypothesized that accumbens activity reflects the level of negative expectation and subsequent pleasant relief. Using fMRI and two purpose-made tasks, we compared hedonic and BOLD responses to relief with responses during an appetitive reward task in 18 healthy volunteers. We expected some similarities in task responses, reflecting common neural substrates implicated across reward types. However, we also hypothesized that relief responses would differ from appetitive rewards in the nucleus accumbens, since only relief pleasantness depends on negative expectations. The results confirmed these hypotheses. Relief and appetitive reward task activity converged in the ventromedial prefrontal cortex, which also correlated with appetitive reward pleasantness ratings. In contrast, dread and pessimism scores correlated with relief but not with appetitive reward hedonics. Moreover, only relief pleasantness covaried with accumbens activation. Importantly, the accumbens signal appeared to specifically reflect individual differences in anticipation of the adverse event (dread, pessimism) but was uncorrelated to appetitive reward hedonics. In conclusion, relief differs from appetitive rewards due to its reliance on negative expectations, the violation of which is reflected in relief-related accumbens activation. PMID:21490964

Waiting for 21-Lutetia "Rosetta" images as a final proof of structurizing force of inertia-gravity waves

NASA Astrophysics Data System (ADS)

Kochemasov, Gennady G.

2010-05-01

The 100 km long flattened asteroid 21-Lutetia will be imaged by the "Rosetta' spacecraft in July 2010. Knowing that heavenly bodies are effectively structurized by warping inertia-gravity waves one might expect that Lutetia will not be an exclusion out of a row of bodies subjected to an action of these waves [1-9]. The elliptical keplerian orbits with periodically changing bodies' accelerations imply inertia-gravity forces applied to any body notwithstanding its size, mass, density, chemical composition, and physical state. These forces produce inertia-gravity waves having in rotating bodied standing character and four directions of propagation (orthogonal and diagonal). Interfering these waves produce in bodies three (five) kinds of tectonic blocks: uprising strongly and moderately (++, +), subsiding deeply and moderately (--, -), and neutral (0) where + and - are compensated. Lengths and amplitudes of warping waves form the harmonic sequence. The fundamental wave1 (long 2πR) makes ubiquitous tectonic dichotomy (two antipodean segments or hemispheres: one risen, another fallen). In small bodies this structurization is expressed in their convexo-concave shape: one hemisphere is bulged, another one pressed in. Bulging hemisphere is extended, pressed in hemisphere contracted. This wave shaping tends to transform a globular body into a tetrahedron - the essentially dichotomous simplest Plato's figure. In this polyhedron always there is an opposition of extension (a face) to contraction (a vertex). The first overtone wave2 (long πR) makes tectonic sectors, also risen and fallen, and regularly disposed on (and in) a globe. This regularity is expressed in an octahedron form. The octahedron (diamond) or its parts are often observed in shapes of small bodies with small gravities. Larger bodies with rather strong gravity tend to smooth polyhedron vertices and edges but a polyhedron structurization is always present inside their globes and is shown in their tectonics, geomorphology and geophysical fields. The shorter warping waves are also present but because of their comparatively small lengths and amplitudes they are not so important in distorting globes. The presented main harmonic row is complicated by superimposed individual waves lengths of which are inversely proportional to orbital frequencies: higher frequency - smaller wave, and, vice versa, lower frequency - larger wave. In the main asteroid belt the fundamental wave of the main sequence and the individual wave (also long 2πR) are in the strongest 1:1 resonance what prohibits an accretion of a real planet because of prevailing debris scattering. Thus, the Lutetia shape can support the main point of the wave planetology - «orbits make structures». [1] Kochemasov G.G. (1999) "Diamond" and "dumb-bells"-like shapes of celestial bodies induced by inertia-gravity waves // 30th Vernadsky-Brown microsymposium on comparative planetology, Abstracts, Moscow, Vernadsky Inst., 49-50. [2] -"- (1999) On convexo-concave shape of small celestial bodies // Asteroids, Comets, Meteors. Cornell Univ., July 26-30, 1999, Abstr. # 24.22. [3] -"- (2006) The wave planetology illustrated - I: dichotomy, sectoring // 44th Vernadsky-Brown microsymposium "Topics in Comparative Planetology", Oct. 9-11, 2006, Moscow, Vernadsky Inst., Abstr. m44_39, CD-ROM; [4] -"- (2006) Theorems of the wave planetology imprinted in small bodies // Geophys. Res. Abstracts, Vol. 8, EGU06-A-01098, CD-ROM. [5] -"- (2007) Plato's polyhedra in space // EPSC Abstracts, Vol. 2, EPSC2007-A-00014, 2007. [6] -"-(2007) Wave shaping of small saturnian satellites and wavy granulation of saturnian rings // Geophys. Res. Abstracts, Vol. 9, EGU2007-A-01594, CD-ROM. [7] -"- (2007) Plato's polyhedra as shapes of small satellites in the outer Solar system // New Concepts in Global Tectonics Newsletter, # 44, 43-45. [8] -"- (2008) Plato' polyhedra as shapes of small icy satellites // Geophys. Res. Abstracts, Vol. 10, EGU2008-A-01271, CD-ROM. [9] -"- (2008) A wave geometrization of small heavenly bodies // GRA, Vol. 10, EGU2008-A-01275, CD-ROM.

Modifying Earth's Insolation with Aerosols: Reflectance and Polarization Properties of Candidate Particulate Materials

NASA Astrophysics Data System (ADS)

Nelson, R. M.; Boryta, M. D.; Hapke, B. W.; Manatt, K. S.; Shkuratov, Y.; Vandervoort, K.; Vides, C.; Quinones, J.

2017-12-01

We report reflectance phase curves of selected materials, including several that, if distributed as particulate aerosols, might regulate solar insolation and hence reduce Earth's surface temperature. (See e.g. Teller et al., 1997). We have identified several materials that have phase functions that are remarkably backscattering at very small phase angles (Nelson et al., 2017). When these materials are of appropriately small particle size and in the form of dispersed discrete random media, they are highly reflective at ultraviolet and visual wavelengths. Particles of less than 0.5 microns in diameter are transparent in the infrared. The most promising of these is the mineral halite (NaCl). NaCl and its sister materials exhibit this property due to their simple cubic crystal structure. In crystalline form they are `corner cube' reflectors similar to those on bicycle reflectors used throughout the world, and in arrays deployed by astronauts on the Moon for precise distance determination. As aerosols distributed in relatively small quantities, NaCl might reduce the solar forcing function by several W/m2, the amount estimated by the IPCC to be the anthropogenic contribution to global warming. Furthermore, NaCl is environmentally benign and, as a particulate aerosol, it would have short residence time in the atmosphere. With great trepidation, we suggest potential use in these areas: Temporary regional application to mitigate short-term, life-threatening conditions in areas where extreme temperature events are expected on timescales of days, and Global application for immediate relief during a near-term transition period to an atmosphere that is generally free of anthropogenic greenhouse gas. We offer this as a temporary relief measure and not a solution, somewhat analogous to the application of morphine in a medical situation. This work partially supported by NASA's Cassini Orbiter Program

Doubling Your Payoff: Winning Pain Relief Engages Endogenous Pain Inhibition1,2,3

PubMed Central

Kwan, Saskia; Schweinhardt, Petra

2015-01-01

Abstract When in pain, pain relief is much sought after, particularly for individuals with chronic pain. In analogy to augmentation of the hedonic experience (“liking”) of a reward by the motivation to obtain a reward (“wanting”), the seeking of pain relief in a motivated state might increase the experience of pain relief when obtained. We tested this hypothesis in a psychophysical experiment in healthy human subjects, by assessing potential pain-inhibitory effects of pain relief “won” in a wheel of fortune game compared with pain relief without winning, exploiting the fact that the mere chance of winning induces a motivated state. The results show pain-inhibitory effects of pain relief obtained by winning in behaviorally assessed pain perception and ratings of pain intensity. Further, the higher participants scored on the personality trait novelty seeking, the more pain inhibition was induced. These results provide evidence that pain relief, when obtained in a motivated state, engages endogenous pain-inhibitory systems beyond the pain reduction that underlies the relief in the first place. Consequently, such pain relief might be used to improve behavioral pain therapy, inducing a positive, perhaps self-amplifying feedback loop of reduced pain and improved functionality. PMID:26464995

How absent negativity relates to affect and motivation: an integrative relief model

PubMed Central

Deutsch, Roland; Smith, Kevin J. M.; Kordts-Freudinger, Robert; Reichardt, Regina

2015-01-01

The present paper concerns the motivational underpinnings and behavioral correlates of the prevention or stopping of negative stimulation – a situation referred to as relief. Relief is of great theoretical and applied interest. Theoretically, it is tied to theories linking affect, emotion, and motivational systems. Importantly, these theories make different predictions regarding the association between relief and motivational systems. Moreover, relief is a prototypical antecedent of counterfactual emotions, which involve specific cognitive processes compared to factual or mere anticipatory emotions. Practically, relief may be an important motivator of addictive and phobic behaviors, self destructive behaviors, and social influence. In the present paper, we will first provide a review of conflicting conceptualizations of relief. We will then present an integrative relief model (IRMO) that aims at resolving existing theoretical conflicts. We then review evidence relevant to distinctive predictions regarding the moderating role of various procedural features of relief situations. We conclude that our integrated model results in a better understanding of existing evidence on the affective and motivational underpinnings of relief, but that further evidence is needed to come to a more comprehensive evaluation of the viability of IRMO. PMID:25806008

Average is Over

NASA Astrophysics Data System (ADS)

Eliazar, Iddo

2018-02-01

The popular perception of statistical distributions is depicted by the iconic bell curve which comprises of a massive bulk of 'middle-class' values, and two thin tails - one of small left-wing values, and one of large right-wing values. The shape of the bell curve is unimodal, and its peak represents both the mode and the mean. Thomas Friedman, the famous New York Times columnist, recently asserted that we have entered a human era in which "Average is Over" . In this paper we present mathematical models for the phenomenon that Friedman highlighted. While the models are derived via different modeling approaches, they share a common foundation. Inherent tipping points cause the models to phase-shift from a 'normal' bell-shape statistical behavior to an 'anomalous' statistical behavior: the unimodal shape changes to an unbounded monotone shape, the mode vanishes, and the mean diverges. Hence: (i) there is an explosion of small values; (ii) large values become super-large; (iii) 'middle-class' values are wiped out, leaving an infinite rift between the small and the super large values; and (iv) "Average is Over" indeed.

Cloaking of arbitrarily shaped objects with homogeneous coatings

NASA Astrophysics Data System (ADS)

Forestiere, Carlo; Dal Negro, Luca; Miano, Giovanni

2014-05-01

We present a theory for the cloaking of arbitrarily shaped objects and demonstrate electromagnetic scattering cancellation through designed homogeneous coatings. First, in the small-particle limit, we expand the dipole moment of a coated object in terms of its resonant modes. By zeroing the numerator of the resulting rational function, we accurately predict the permittivity values of the coating layer that abates the total scattered power. Then, we extend the applicability of the method beyond the small-particle limit, deriving the radiation corrections of the scattering-cancellation permittivity within a perturbation approach. Our method permits the design of invisibility cloaks for irregularly shaped devices such as complex sensors and detectors.

CT Radiogenomic Characterization of EGFR, K-RAS, and ALK Mutations in Non-Small Cell Lung Cancer.

PubMed

Rizzo, Stefania; Petrella, Francesco; Buscarino, Valentina; De Maria, Federica; Raimondi, Sara; Barberis, Massimo; Fumagalli, Caterina; Spitaleri, Gianluca; Rampinelli, Cristiano; De Marinis, Filippo; Spaggiari, Lorenzo; Bellomi, Massimo

2016-01-01

To assess the association between CT features and EGFR, ALK, KRAS mutations in non-small cell lung cancer. Patients undergoing chest CT and testing for the above gene mutations were included. Qualitative evaluation of CTs included: lobe; lesion diameter; shape; margins; ground-glass opacity; density; cavitation; air bronchogram; pleural thickening; intratumoral necrosis; nodules in tumour lobe; nodules in non-tumour lobes; pleural retraction; location; calcifications; emphysema; fibrosis; pleural contact; pleural effusion. Statistical analysis was performed to assess association of features with each gene mutation. ROC curves for gene mutations were drawn; the corresponding area under the curve was calculated. P-values <0.05 were considered significant. Of 285 patients, 60/280 (21.43 %) were positive for EGFR mutation; 31/270 (11.48 %) for ALK rearrangement; 64/240 (26.67 %) for KRAS mutation. EGFR mutation was associated with air bronchogram, pleural retraction, females, non-smokers, small lesion size, and absence of fibrosis. ALK rearrangements were associated with age and pleural effusion. KRAS mutation was associated with round shape, nodules in non-tumour lobes, and smoking. This study disclosed associations between CT features and alterations of EGFR (air bronchogram, pleural retraction, small lesion size, absence of fibrosis), ALK (pleural effusion) and KRAS (round lesion shape, nodules in non-tumour lobes). Air bronchogram, pleural retraction, small size relate to EGFR mutation in NSCLC. Pleural effusion and younger age relate to ALK mutation. Round lesion shape, nodules in non-tumour lobes relate to KRAS mutation.

Local Solid Shape

PubMed Central

Koenderink, Jan; van Doorn, Andrea

2015-01-01

Local solid shape applies to the surface curvature of small surface patches—essentially regions of approximately constant curvatures—of volumetric objects that are smooth volumetric regions in Euclidean 3-space. This should be distinguished from local shape in pictorial space. The difference is categorical. Although local solid shape has naturally been explored in haptics, results in vision are not forthcoming. We describe a simple experiment in which observers judge shape quality and magnitude of cinematographic presentations. Without prior training, observers readily use continuous shape index and Casorati curvature scales with reasonable resolution. PMID:27648217

Single dose oral paracetamol (acetaminophen) with codeine for postoperative pain in adults

PubMed Central

Toms, Laurence; Derry, Sheena; Moore, R Andrew; McQuay, Henry J

2014-01-01

Background This is an updated version of the Cochrane review published in Issue 4, 1998. Combining drugs from different classes with different modes of action may offer opportunity to optimise efficacy and tolerability, using lower doses of each drug to achieve the same degree of pain relief. Previously we concluded that addition of codeine to paracetamol provided additional pain relief, but at expense of additional adverse events. New studies have been published since. This review sought to evaluate efficacy and safety of paracetamol plus codeine using current data, and compare findings with other analgesics evaluated similarly. Objectives Assess efficacy of single dose oral paracetamol plus codeine in acute postoperative pain, increase in efficacy due to the codeine component, and associated adverse events. Search methods We searched CENTRAL, MEDLINE, EMBASE, the Oxford Pain Relief Database in October 2008 for this update. Selection criteria Randomised, double-blind, placebo-controlled trials of paracetamol plus codeine, compared with placebo or the same dose of paracetamol alone, for relief of acute postoperative pain in adults. Data collection and analysis Two authors assessed trial quality and extracted data. The area under the “pain relief versus time” curve was used to derive proportion of participants with paracetamol plus codeine and placebo or paracetamol alone experiencing least 50% pain relief over four-to-six hours, using validated equations. Number-needed-to-treat-to-benefit (NNT) was calculated using 95% confidence intervals (CIs). Proportion of participants using rescue analgesia over a specified time period, and time to use of rescue analgesia, were sought as additional measures of efficacy. Information on adverse events and withdrawals were collected. Main results Twenty-six studies, with 2295 participants, were included comparing paracetamol plus codeine with placebo. Significant dose response was seen for the outcome of at least 50% pain relief over four-to-six hours, with NNTs of 2.2 (95% CI 1.8 to 2.9) for 800 to 1000 mg paracetamol plus 60 mg codeine, 3.9 (2.9 to 4.5) for 600 to 650 mg paracetamol plus 60 mg codeine, and 6.9 (4.8 to 12) for 300 mg paracetamol plus 30 mg codeine. Time to use of rescue medication was over four hours with paracetamol plus codeine and two hours with placebo. The NNT to prevent remedication was 5.6 (4.0 to 9.0) for 600 mg paracetamol plus 60 mg codeine over four to six hours. Adverse events increased of mainly mild to moderate severity with paracetamol plus codeine than placebo. Fourteen studies, with 926 participants, were included in the comparison of paracetamol plus codeine with the same dose of paracetamol alone. Addition of codeine increased proportion of participants achieving at least 50% pain relief over four-to-six hours by 10 to 15%, increased time to use of rescue medication by about one hour, and reduced proportion of participants needing rescue medication by about 15% (NNT to prevent remedication 6.9 (4.2 to 19). Adverse events were mainly mild to moderate in severity and incidence did not differ between groups. Authors’ conclusions This update confirms previous findings that combining paracetamol with codeine provided clinically useful levels of pain relief in about 50% of patients with moderate to severe postoperative pain, compared with under 20% with placebo. New information for remedication shows that the combination extended the duration of analgesia by about one hour compared to treatment with the same dose of paracetamol alone. At higher doses, more participants experienced adequate pain relief, but the amount of information available for the 1000 mg paracetamol plus 60 mg codeine dose was small, and based on limited information. PMID:19160199

Volcanic Constructs on Ganymede and Enceladus: Topographic Evidence from Stereo Images and Photoclinometry

NASA Technical Reports Server (NTRS)

Schenk, Paul M.; Moore, Jeffrey M.

1995-01-01

The morphology of volcanic features on Ganymede differs significantly from that on the terrestrial planets. Few if any major volcanic landforms, such as thick flows or shield volcanoes, have been identified to date. Using new stereo Voyager images, we have searched Ganymede for relief-generating volcanic constructs. We observed seven major types of volcanic structures, including several not previously recognized. The oldest are broad flat-topped domes partially filling many older craters in dark terrain. Similar domes occur on Enceladus. Together with smooth dark deposits, these domes indicate that the volcanic history of the dark terrain is complex. Bright terrain covers vast areas, although the style of emplacement remains unclear. Smooth bright materials embay and flood older terrains, and may have been emplaced as low- viscosity fluids. Associated with smooth bright material are a number of scalloped-shaped, semi- enclosed scarps that cut into preexisting terrain. In planform these structures resemble terrestrial calderas. The youngest volcanic materials identified are a series of small flows that may have flooded the floor of the multiring impact structure Gilgamesh, forming a broad dome, The identification of volcanic constructs up to I km thick is the first evidence for extrusion of moderate-to-high viscosity material on Ganymede. Viscosity and yield strength estimates for these materials span several orders of magnitude, indicating that volcanic materials on Ganymede have a range of compositions and/or were extruded under a wide range of conditions and/or eruptive styles.

SAR and LIDAR fusion: experiments and applications

NASA Astrophysics Data System (ADS)

Edwards, Matthew C.; Zaugg, Evan C.; Bradley, Joshua P.; Bowden, Ryan D.

2013-05-01

In recent years ARTEMIS, Inc. has developed a series of compact, versatile Synthetic Aperture Radar (SAR) systems which have been operated on a variety of small manned and unmanned aircraft. The multi-frequency-band SlimSAR has demonstrated a variety of capabilities including maritime and littoral target detection, ground moving target indication, polarimetry, interferometry, change detection, and foliage penetration. ARTEMIS also continues to build upon the radar's capabilities through fusion with other sensors, such as electro-optical and infrared camera gimbals and light detection and ranging (LIDAR) devices. In this paper we focus on experiments and applications employing SAR and LIDAR fusion. LIDAR is similar to radar in that it transmits a signal which, after being reflected or scattered by a target area, is recorded by the sensor. The differences are that a LIDAR uses a laser as a transmitter and optical sensors as a receiver, and the wavelengths used exhibit a very different scattering phenomenology than the microwaves used in radar, making SAR and LIDAR good complementary technologies. LIDAR is used in many applications including agriculture, archeology, geo-science, and surveying. Some typical data products include digital elevation maps of a target area and features and shapes extracted from the data. A set of experiments conducted to demonstrate the fusion of SAR and LIDAR data include a LIDAR DEM used in accurately processing the SAR data of a high relief area (mountainous, urban). Also, feature extraction is used in improving geolocation accuracy of the SAR and LIDAR data.

Geology of Pluto and Charon Overview

NASA Technical Reports Server (NTRS)

Moore, Jeffrey Morgan

2015-01-01

Pluto's surface was found to be remarkably diverse in terms of its range of landforms, terrain ages, and inferred geological processes. There is a latitudinal zonation of albedo. The conspicuous bright albedo heart-shaped feature informally named Tombaugh Regio is comprised of several terrain types. Most striking is Texas-sized Sputnik Planum, which is apparently level, has no observable craters, and is divided by polygons and ovoids bounded by shallow troughs. Small smooth hills are seen in some of the polygon-bounding troughs. These hills could either be extruded or exposed by erosion. Sputnik Planum polygon/ovoid formation hypotheses range from convection to contraction, but convection is currently favored. There is evidence of flow of plains material around obstacles. Mountains, especially those seen south of Sputnik Planum, exhibit too much relief to be made of CH4, CO, or N2, and thus are probably composed of H2O-ice basement material. The north contact of Sputnik Planum abuts a scarp, above which is heavily modified cratered terrain. Pluto's large moon Charon is generally heavily to moderately cratered. There is a mysterious structure in the arctic. Charon's surface is crossed by an extensive system of rift faults and graben. Some regions are smoother and less cratered, reminiscent of lunar maria. On such a plain are large isolated block mountains surrounded by moats. At this conference we will present highlights of the latest observations and analysis. This work was supported by NASA's New Horizons project

The People in the PLA: Recruitment, Training, and Education in China’s Military

DTIC Science & Technology

2008-09-01

action training (feizhanzheng xingdong xunlian, 非 战 争 行动训练, includes nontraditional security missions, such as anti- terrorism, disaster relief...texts: Soviet Red Army Combat Regulations, (Sulian hongjun zhandou tiaoling; 苏联红军 战 斗条令) and Soviet Army Field Operations Regulations (Sujun yezhan...tiaoling; 苏军 野 战 条令), as well as classes on small unit tactics and fighting in different types of terrain.9 In 1937 the Red Army School was renamed the

Intracutaneous sterile water for back pain in labour.

PubMed Central

Reynolds, J. L.

1994-01-01

Intracutaneous sterile water appears to be a simple, effective, and harmless technique for relieving back pain. This technique has been used to relieve pain of renal colic, whiplash, and back pain in labour. Family doctors often practise obstetrics in small or isolated units that have limited options for pain relief in labour. This technique is simple, is easy to learn, and appears effective for relieving back pain, which complicates about one third of all labours. Images Figures 1-2 Figures 3-4 PMID:7950471

The Budgetary Effects of the United States Participation in the International Monetary Fund

DTIC Science & Technology

2016-06-01

to policymakers and the general public. Proponents of the fair-value approach counter that deci- sions about spending the public’s money should take...member countries, which it must repay, and the amounts owed to members that have lent money to the organiza- tion under the NAB, the GAB, or separate...granted Liberia debt relief in 2010, so it never repaid those new IMF loans in full.1 Because of the relatively small amount of money involved

Health status of Haitian migrants--U.S. Naval Base, Guantanamo Bay, Cuba, November 1991-April 1992.

PubMed

1993-02-26

In November 1991, following a military coup in Haiti, thousands of Haitians fled that country in small open boats. Most migrants were intercepted by U.S. Coast Guard cutters and taken to the U.S. Naval Base at Guantanamo Bay (GTMO), Cuba (Figure 1), where the U.S. Department of Defense (DOD) established a joint task force (JTF) migrant relief operation.* This report summarizes the results of health assessments of migrants conducted by the JTF.

Nasal hydropulsion: a novel tumor biopsy technique.

PubMed

Ashbaugh, Elizabeth A; McKiernan, Brendan C; Miller, Carrie J; Powers, Barbara

2011-01-01

Intranasal tumors of dogs and cats pose a diagnostic and therapeutic challenge for small animal practitioners. Multiple nasal biopsy techniques have been described in the past. This report describes a simplified flushing technique to biopsy and debulk nasal tumors, which often also results in immediate clinical relief for the patient. Based on the results of this retrospective study, the authors recommend high-pressure saline hydropulsion as a minimally invasive diagnostic, and potentially therapeutic, technique for nasal tumors in dogs and cats.

Set Size, Individuation, and Attention to Shape

ERIC Educational Resources Information Center

Cantrell, Lisa; Smith, Linda B.

2013-01-01

Much research has demonstrated a shape bias in categorizing and naming solid objects. This research has shown that when an entity is conceptualized as an individual object, adults and children attend to the object's shape. Separate research in the domain of numerical cognition suggest that there are distinct processes for quantifying small and…

Damage healing ability of a shape-memory-polymer-based particulate composite with small thermoplastic contents

NASA Astrophysics Data System (ADS)

Nji, Jones; Li, Guoqiang

2012-02-01

The purpose of this study is to investigate the potential of a shape-memory-polymer (SMP)-based particulate composite to heal structural-length scale damage with small thermoplastic additive contents through a close-then-heal (CTH) self-healing scheme that was introduced in a previous study (Li and Uppu 2010 Comput. Sci. Technol. 70 1419-27). The idea is to achieve reasonable healing efficiencies with minimal sacrifice in structural load capacity. By first closing cracks, the gap between two crack surfaces is narrowed and a lesser amount of thermoplastic particles is required to achieve healing. The particulate composite was fabricated by dispersing copolyester thermoplastic particles in a shape memory polymer matrix. It is found that, for small thermoplastic contents of less than 10%, the CTH scheme followed in this study heals structural-length scale damage in the SMP particulate composite to a meaningful extent and with less sacrifice of structural capacity.

Resolving topographic detail on Venus by modeling complex Magellan altimetry echoes

NASA Technical Reports Server (NTRS)

Lovell, Amy J.; Schloerb, F. Peter; Mcgill, George E.

1993-01-01

Magellan's altimeter is providing some of the finest resolution topography of Venus achieved to date. Nevertheless, efforts continue to improve the topographic resolution whenever possible. One effort to this end is stereoscopic imaging, which provides topography at scales similar to that of the synthetic aperture radar (SAR). However, this technique requires two SAR images of the same site to be obtained and limits the utility of this method. In this paper, we present another method to resolve topographic features at scales smaller than that of an altimeter footprint, which is more globally applicable than the stereoscopic approach. Each pulse which is transmitted by Magellan's altimeter scatters from the planet and echoes to the receiver, delayed based on the distance between the spacecraft and each surface element. As resolved in time, each element of an altimetry echo represents the sum of all points on the surface which are equidistant from the spacecraft. Thus, individual returns, as a function of time, create an echo profile which may be used to derive properties of the surface, such as the scattering law or, in this case, the topography within the footprint. The Magellan project has derived some of this information by fitting model templates to radar echo profiles. The templates are calculated based on Hagfor's Law, which assumes a smooth, gently undulating surface. In most regions these templates provide a reasonable fit to the observed echo profile; however, in some cases the surface departs from these simple assumptions and more complex profiles are observed. Specifically, we note that sub-footprint topographic relief apparently has a strong effect on the shape of the echo profile. To demonstrate the effects of sub-resolution relief on echo profiles, we have calculated the echo shapes from a wide range of simple topographic models. At this point, our topographic models have emphasized surfaces where only two dominant elevations are contained within a footprint, such as graben, ridges, crater rims, and central features in impact craters.

Small-angle scattering of polychromatic X-rays: effects of bandwidth, spectral shape and high harmonics.

PubMed

Chen, Sen; Luo, Sheng Nian

2018-03-01

Polychromatic X-ray sources can be useful for photon-starved small-angle X-ray scattering given their high spectral fluxes. Their bandwidths, however, are 10-100 times larger than those using monochromators. To explore the feasibility, ideal scattering curves of homogeneous spherical particles for polychromatic X-rays are calculated and analyzed using the Guinier approach, maximum entropy and regularization methods. Monodisperse and polydisperse systems are explored. The influence of bandwidth and asymmetric spectra shape are explored via Gaussian and half-Gaussian spectra. Synchrotron undulator spectra represented by two undulator sources of the Advanced Photon Source are examined as an example, as regards the influence of asymmetric harmonic shape, fundamental harmonic bandwidth and high harmonics. The effects of bandwidth, spectral shape and high harmonics on particle size determination are evaluated quantitatively.

Small-angle scattering of polychromatic X-rays: effects of bandwidth, spectral shape and high harmonics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Sen; Luo, Sheng-Nian

Polychromatic X-ray sources can be useful for photon-starved small-angle X-ray scattering given their high spectral fluxes. Their bandwidths, however, are 10–100 times larger than those using monochromators. To explore the feasibility, ideal scattering curves of homogeneous spherical particles for polychromatic X-rays are calculated and analyzed using the Guinier approach, maximum entropy and regularization methods. Monodisperse and polydisperse systems are explored. The influence of bandwidth and asymmetric spectra shape are exploredviaGaussian and half-Gaussian spectra. Synchrotron undulator spectra represented by two undulator sources of the Advanced Photon Source are examined as an example, as regards the influence of asymmetric harmonic shape, fundamentalmore » harmonic bandwidth and high harmonics. The effects of bandwidth, spectral shape and high harmonics on particle size determination are evaluated quantitatively.« less

Effective Endovascular Stenting of Malignant Portal Vein Obstruction in Pancreatic Cancer

PubMed Central

Ellis, Christian M.; Shenoy, Sadashiv; Litwin, Alan; Soehnlein, Stephanie; Gibbs, John F.

2009-01-01

We report herein the case of a patient successfully treated by transhepatic portal venous stent placement for malignant portal vein obstruction with associated gastric and small bowel varices and repeated gastrointestinal bleeding. CT angiography and portography showed severe portal vein obstruction from recurrent pancreatic cancer 15 months following pancreaticoduodenectomy with tumor encasement and dilated collateral veins throughout the gastric and proximal small bowel wall as the suspected cause of the GI bleeding. Successful transhepatic endovascular stent placement of the splenic vein at the portal vein confluence followed by balloon dilation was performed with immediate decompression of the gastric and small bowel varices and relief of GI hemorrhage in this patient until his death four months later. The treatment for patients with this dilemma can prove to be difficult, but as we have shown endovascular stenting of the portal system is an effective treatment option. PMID:19826629

Effective endovascular stenting of malignant portal vein obstruction in pancreatic cancer.

PubMed

Ellis, Christian M; Shenoy, Sadashiv; Litwin, Alan; Soehnlein, Stephanie; Gibbs, John F

2009-01-01

We report herein the case of a patient successfully treated by transhepatic portal venous stent placement for malignant portal vein obstruction with associated gastric and small bowel varices and repeated gastrointestinal bleeding. CT angiography and portography showed severe portal vein obstruction from recurrent pancreatic cancer 15 months following pancreaticoduodenectomy with tumor encasement and dilated collateral veins throughout the gastric and proximal small bowel wall as the suspected cause of the GI bleeding. Successful transhepatic endovascular stent placement of the splenic vein at the portal vein confluence followed by balloon dilation was performed with immediate decompression of the gastric and small bowel varices and relief of GI hemorrhage in this patient until his death four months later. The treatment for patients with this dilemma can prove to be difficult, but as we have shown endovascular stenting of the portal system is an effective treatment option.

30 CFR 203.55 - Under what conditions can my end-of-life royalty relief arrangement for an oil and gas lease be...

Code of Federal Regulations, 2011 CFR

2011-07-01

... royalty relief arrangement for an oil and gas lease be ended? 203.55 Section 203.55 Mineral Resources... REVENUE MANAGEMENT RELIEF OR REDUCTION IN ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief... for an oil and gas lease be ended? (a) If you have an end-of-life royalty relief arrangement, you may...

Small, smooth, nonmobile cardiac myxoma detected by transesophageal echocardiography following recurrent cerebral infarction: a case report.

PubMed

Saito, Yuki; Aizawa, Yoshihiro; Monno, Koyuru; Nagashima, Koichi; Kurokawa, Sayaka; Osaka, Shunji; Akimoto, Takayoshi; Kamei, Satoshi; Tanaka, Masashi; Hirayama, Atsushi

2017-05-10

Cardiac myxoma is known to cause repeated events of cerebral embolism. Soft and irregularly shaped myxomas with high mobility are associated with a higher occurrence of cerebral embolism. In contrast, nonmobile cardiac myxomas with a round regular shape are rarely considered to be a cause of cerebral embolism. In this case, we present a patient with recurrent cerebral embolism associated with a small and nonmobile cardiac myxoma of round regular shape. A 76-year-old Japanese man presented to our hospital with weakness in his right upper extremity. He had a history of right frontal lobe infarction in the previous month. T2-weighted magnetic resonance imaging revealed an area of hyperintensity in the left precentral gyrus, indicating acute cerebral infarction. Transthoracic echocardiography revealed normal left ventricular function and no abnormalities. However, transesophageal echocardiography showed a small and nonmobile left atrial tumor with round regular shape attached to the ostium secundum of the atrial septum. Based on these findings, we diagnosed recurrent cerebral infarction due to embolization caused by left atrial myxoma, and cardiac tumor extraction was performed on hospitalization day 36. The excised tumor measured 0.6 × 0.6 × 0.5 cm and was diagnosed as cardiac myxoma by histologic examination. Even small and nonmobile cardiac myxomas with a round regular shape may cause recurrent cerebral infarction. The diagnosis of this type of atrial myxoma is elusive and transesophageal echocardiography was an effective method of detection. In a clinical situation, this type of cardiac myxoma may be overlooked as a cause of cerebral infarction.

COUPLED SPIN AND SHAPE EVOLUTION OF SMALL RUBBLE-PILE ASTEROIDS: SELF-LIMITATION OF THE YORP EFFECT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cotto-Figueroa, Desireé; Statler, Thomas S.; Richardson, Derek C.

2015-04-10

We present the first self-consistent simulations of the coupled spin-shape evolution of small gravitational aggregates under the influence of the YORP effect. Because of YORP’s sensitivity to surface topography, even small centrifugally driven reconfigurations of aggregates can alter the YORP torque dramatically, resulting in spin evolution that can differ qualitatively from the rigid-body prediction. One-third of our simulations follow a simple evolution described as a modified YORP cycle. Two-thirds exhibit one or more of three distinct behaviors—stochastic YORP, self-governed YORP, and stagnating YORP—which together result in YORP self-limitation. Self-limitation confines rotation rates of evolving aggregates to far narrower ranges thanmore » those expected in the classical YORP cycle, greatly prolonging the times over which objects can preserve their sense of rotation. Simulated objects are initially randomly packed, disordered aggregates of identical spheres in rotating equilibrium, with low internal angles of friction. Their shape evolution is characterized by rearrangement of the entire body, including the deep interior. They do not evolve to axisymmetric top shapes with equatorial ridges. Mass loss occurs in one-third of the simulations, typically in small amounts from the ends of a prolate-triaxial body. We conjecture that YORP self-limitation may inhibit formation of top-shapes, binaries, or both, by restricting the amount of angular momentum that can be imparted to a deformable body. Stochastic YORP, in particular, will affect the evolution of collisional families whose orbits drift apart under the influence of Yarkovsky forces, in observable ways.« less

A highly compliant serpentine shaped polyimide interconnect for front-end strain relief in chronic neural implants.

PubMed

Sankar, Viswanath; Sanchez, Justin C; McCumiskey, Edward; Brown, Nagid; Taylor, Curtis R; Ehlert, Gregory J; Sodano, Henry A; Nishida, Toshikazu

2013-01-01

While the signal quality of recording neural electrodes is observed to degrade over time, the degradation mechanisms are complex and less easily observable. Recording microelectrodes failures are attributed to different biological factors such as tissue encapsulation, immune response, and disruption of blood-brain barrier (BBB) and non-biological factors such as strain due to micromotion, insulation delamination, corrosion, and surface roughness on the recording site (1-4). Strain due to brain micromotion is considered to be one of the important abiotic factors contributing to the failure of the neural implants. To reduce the forces exerted by the electrode on the brain, a high compliance 2D serpentine shaped electrode cable was designed, simulated, and measured using polyimide as the substrate material. Serpentine electrode cables were fabricated using MEMS microfabrication techniques, and the prototypes were subjected to load tests to experimentally measure the compliance. The compliance of the serpentine cable was numerically modeled and quantitatively measured to be up to 10 times higher than the compliance of a straight cable of same dimensions and material.

Development and evaluation of a new contoured cushion system with an optimized normalization algorithm.

PubMed

Li, Sujiao; Zhang, Zhengxiang; Wang, Jue

2014-01-01

Prevention of pressure sores remains a significant problem confronting spinal cord injury patients and the elderly with limited mobility. One vital aspect of this subject concerns the development of cushions to decrease pressure ulcers for seated patients, particularly those bound by wheelchairs. Here, we present a novel cushion system that employs interface pressure distribution between the cushion and the buttocks to design custom contoured foam cushion. An optimized normalization algorithm was proposed, with which interface pressure distribution was transformed into the carving depth of foam cushions according to the biomechanical characteristics of the foam. The shape and pressure-relief performance of the custom contoured foam cushions was investigated. The outcomes showed that the contoured shape of personalized cushion matched the buttock contour very well. Moreover, the custom contoured cushion could alleviate pressure under buttocks and increase subjective comfort and stability significantly. Furthermore, the fabricating method not only decreased the unit production cost but also simplified the procedure for manufacturing. All in all, this prototype seat cushion would be an effective and economical way to prevent pressure ulcers.

On the relationship between sea level and Spartina alterniflora production

USGS Publications Warehouse

Kirwan, Matthew L.; Christian, Robert R.; Blum, Linda K.; Brinson, Mark M.

2012-01-01

A positive relationship between interannual sea level and plant growth is thought to stabilize many coastal landforms responding to accelerating rates of sea level rise. Numerical models of delta growth, tidal channel network evolution, and ecosystem resilience incorporate a hump-shaped relationship between inundation and plant primary production, where vegetation growth increases with sea level up to an optimum water depth or inundation frequency. In contrast, we use decade-long measurements of Spartina alterniflora biomass in seven coastal Virginia (USA) marshes to demonstrate that interannual sea level is rarely a primary determinant of vegetation growth. Although we find tepid support for a hump-shaped relationship between aboveground production and inundation when marshes of different elevation are considered, our results suggest that marshes high in the intertidal zone and low in relief are unresponsive to sea level fluctuations. We suggest existing models are unable to capture the behavior of wetlands in these portions of the landscape, and may underestimate their vulnerability to sea level rise because sea level rise will not be accompanied by enhanced plant growth and resultant sediment accumulation.

Meanders in Ridge Form in the Zephyria Region

NASA Image and Video Library

2015-11-05

In this image from NASA Mars Reconnaissance Orbiter spacecraft, an ancient sinuous meandering river system is surrounded by features called yardangs. The yardangs are the ridge-like landforms that align approximately north-south. These features were created as the wind scoured and eroded the bedrock. The raised relief of the meandering river suggests inverted topography, likely due to lithification and cementation of the riverbed sediment. The cemented channel deposits were resistant, and thus less susceptible to erosion over time. However, the area surrounding the riverbed suggests that this area was a floodplain of weaker lithology that was subsequently eroded and shaped to the yardangs. The main meandering inverted riverbed within the image has a length of about 13 kilometers. The elevation of the channel at the top of the image is on the order of 113 meters higher than the bottom, based on Mars Orbiter Laser Altimeter (MOLA) data. This elevation difference and the increase in sinuosity of the channel shape in the southerly direction implies that the flow of the ancient river may have been heading south-southwest. http://photojournal.jpl.nasa.gov/catalog/PIA20047

A Highly Compliant Serpentine Shaped Polyimide Interconnect for Front-End Strain Relief in Chronic Neural Implants

PubMed Central

Sankar, Viswanath; Sanchez, Justin C.; McCumiskey, Edward; Brown, Nagid; Taylor, Curtis R.; Ehlert, Gregory J.; Sodano, Henry A.; Nishida, Toshikazu

2013-01-01

While the signal quality of recording neural electrodes is observed to degrade over time, the degradation mechanisms are complex and less easily observable. Recording microelectrodes failures are attributed to different biological factors such as tissue encapsulation, immune response, and disruption of blood-brain barrier (BBB) and non-biological factors such as strain due to micromotion, insulation delamination, corrosion, and surface roughness on the recording site (1–4). Strain due to brain micromotion is considered to be one of the important abiotic factors contributing to the failure of the neural implants. To reduce the forces exerted by the electrode on the brain, a high compliance 2D serpentine shaped electrode cable was designed, simulated, and measured using polyimide as the substrate material. Serpentine electrode cables were fabricated using MEMS microfabrication techniques, and the prototypes were subjected to load tests to experimentally measure the compliance. The compliance of the serpentine cable was numerically modeled and quantitatively measured to be up to 10 times higher than the compliance of a straight cable of same dimensions and material. PMID:24062716

Suppression of dislocations by Sb spray in the vicinity of InAs/GaAs quantum dots

PubMed Central

2014-01-01

The effect of Sb spray prior to the capping of a GaAs layer on the structure and properties of InAs/GaAs quantum dots (QDs) grown by molecular beam epitaxy (MBE) is studied by cross-sectional high-resolution transmission electron microscopy (HRTEM). Compared to the typical GaAs-capped InAs/GaAs QDs, Sb-sprayed QDs display a more uniform lens shape with a thickness of about 3 ~ 4 nm rather than the pyramidal shape of the non-Sb-sprayed QDs. Particularly, the dislocations were observed to be passivated in the InAs/GaAs interface region and even be suppressed to a large extent. There are almost no extended dislocations in the immediate vicinity of the QDs. This result is most likely related to the formation of graded GaAsSb immediately adjacent to the InAs QDs that provides strain relief for the dot/capping layer lattice mismatch. PACS 81.05.Ea; 81.07.-b; 81.07.Ta PMID:24948897

A geomorphic process law for detachment-limited hillslopes

NASA Astrophysics Data System (ADS)

Turowski, Jens

2015-04-01

Geomorphic process laws are used to assess the shape evolution of structures at the Earth's surface over geological time scales, and are routinely used in landscape evolution models. There are two currently available concepts on which process laws for hillslope evolution rely. In the transport-limited concept, the evolution of a hillslope is described by a linear or a non-linear diffusion equation. In contrast, in the threshold slope concept, the hillslope is assumed to collapse to a slope equal to the internal friction angle of the material when the load due to the relief exists the material strength. Many mountains feature bedrock slopes, especially in the high mountains, and material transport along the slope is limited by the erosion of the material from the bedrock. Here, I suggest a process law for detachment-limited or threshold-dominated hillslopes, in which the erosion rate is a function of the applied stress minus the surface stress due to structural loading. The process law leads to the prediction of an equilibrium form that compares well to the shape of many mountain domes.

Minimum magnetic curvature for resilient divertors using Compact Toroidal Hybrid geometry

NASA Astrophysics Data System (ADS)

Bader, A.; Hegna, C. C.; Cianciosa, M.; Hartwell, G. J.

2018-05-01

The properties of resilient divertors are explored using equilibria derived from Compact Toroidal Hybrid (CTH) geometries. Resilience is defined here as the robustness of the strike point patterns as the plasma geometry and/or plasma profiles are changed. The addition of plasma current in the CTH configurations significantly alters the shape of the last closed flux surface and the rotational transform profile, however, it does not alter the strike point pattern on the target plates, and hence has resilient divertor features. The limits of when a configuration transforms to a resilient configuration is then explored. New CTH-like configurations are generated that vary from a perfectly circular cross section to configurations with increasing amounts of toroidal shaping. It is found that even small amounts of toroidal shaping lead to strike point localization that is similar to the standard CTH configuration. These results show that only a small degree of three-dimensional shaping is necessary to produce a resilient divertor, implying that any highly shaped optimized stellarator will possess the resilient divertor property.

Refuge alternatives relief valve testing and design with updated test stand.

PubMed

Lutz, T J; Bissert, P T; Homce, G T; Yonkey, J A

2018-03-01

Underground refuge alternatives require an air source to supply breathable air to the occupants. This requires pressure relief valves to prevent unsafe pressures from building up within the refuge alternative. The U.S. Mine Safety and Health Administration (MSHA) mandates that pressure relief valves prevent pressure from exceeding 1.25 kPa (0.18 psi), or as specified by the manufacturer, above mine atmospheric pressure when a fan or compressor is used for the air supply. The U.S. National Institute for Occupational Safety and Health (NIOSH) tested a variety of pressure relief valves using an instrumented test fixture consisting of data acquisition equipment, a centrifugal blower, ductwork and various sensors to determine if the subject pressure relief valves meet the MSHA requirement. Relief pressures and flow characteristics, including opening pressure and flow rate, were measured for five different pressure relief valves under a variety of conditions. The subject pressure relief valves included two off-the-shelf modified check valves, two check valves used in MSHA-approved built-in-place refuge alternatives, and a commercially available valve that was designed for a steel refuge alternative and is currently being used in some built-in-place refuge alternatives. The test results showed relief pressures ranging from 0.20 to 1.53 kPa (0.03 to 0.22 psi) and flow rates up to 19.3 m 3 /min (683 scfm). As tested, some of the pressure relief valves did not meet the 1.25 kPa (0.18 psi) relief specification.

Microgravity

NASA Image and Video Library

1998-01-01

On STS-89, three Mechanics of Granular Materials (MGM) test cells were subjected to five cycles of compression and relief (left) and three were subjected to shorter displacement cycles that simulate motion during an earthquake (right). In the compression/relief tests, the sand particles rearranged themselves and slightly re-expanded the column during relief. In the short displacement tests, the specimen's resistance to compression decreases, even though the displacement remains the same. The specimens were cycled up to 100 times or until the resistive force was less than 1% that of the previous cycle. Sand and soil grains have faces that can cause friction as they roll and slide against each other, or even cause sticking and form small voids between grains. This complex behavior can cause soil to behave like a liquid under certain conditions such as earthquakes or when powders are handled in industrial processes. Mechanics of Granular Materials (MGM) experiments aboard the Space Shuttle use the microgravity of space to simulate this behavior under conditons that carnot be achieved in laboratory tests on Earth. MGM is shedding light on the behavior of fine-grain materials under low effective stresses. Applications include earthquake engineering, granular flow technologies (such as powder feed systems for pharmaceuticals and fertilizers), and terrestrial and planetary geology. Nine MGM specimens have flown on two Space Shuttle flights. Another three are scheduled to fly on STS-107. The principal investigator is Stein Sture of the University of Colorado at Boulder. Credit: NASA/Marshall Space Flight Center (MSFC)

Graphs of Soil Mechanics Tests in Orbit

NASA Technical Reports Server (NTRS)

1998-01-01

On STS-89, three Mechanics of Granular Materials (MGM) test cells were subjected to five cycles of compression and relief (left) and three were subjected to shorter displacement cycles that simulate motion during an earthquake (right). In the compression/relief tests, the sand particles rearranged themselves and slightly re-expanded the column during relief. In the short displacement tests, the specimen's resistance to compression decreases, even though the displacement remains the same. The specimens were cycled up to 100 times or until the resistive force was less than 1% that of the previous cycle. Sand and soil grains have faces that can cause friction as they roll and slide against each other, or even cause sticking and form small voids between grains. This complex behavior can cause soil to behave like a liquid under certain conditions such as earthquakes or when powders are handled in industrial processes. Mechanics of Granular Materials (MGM) experiments aboard the Space Shuttle use the microgravity of space to simulate this behavior under conditons that carnot be achieved in laboratory tests on Earth. MGM is shedding light on the behavior of fine-grain materials under low effective stresses. Applications include earthquake engineering, granular flow technologies (such as powder feed systems for pharmaceuticals and fertilizers), and terrestrial and planetary geology. Nine MGM specimens have flown on two Space Shuttle flights. Another three are scheduled to fly on STS-107. The principal investigator is Stein Sture of the University of Colorado at Boulder. Credit: NASA/Marshall Space Flight Center (MSFC)

Body size and allometric variation in facial shape in children.

PubMed

Larson, Jacinda R; Manyama, Mange F; Cole, Joanne B; Gonzalez, Paula N; Percival, Christopher J; Liberton, Denise K; Ferrara, Tracey M; Riccardi, Sheri L; Kimwaga, Emmanuel A; Mathayo, Joshua; Spitzmacher, Jared A; Rolian, Campbell; Jamniczky, Heather A; Weinberg, Seth M; Roseman, Charles C; Klein, Ophir; Lukowiak, Ken; Spritz, Richard A; Hallgrimsson, Benedikt

2018-02-01

Morphological integration, or the tendency for covariation, is commonly seen in complex traits such as the human face. The effects of growth on shape, or allometry, represent a ubiquitous but poorly understood axis of integration. We address the question of to what extent age and measures of size converge on a single pattern of allometry for human facial shape. Our study is based on two large cross-sectional cohorts of children, one from Tanzania and the other from the United States (N = 7,173). We employ 3D facial imaging and geometric morphometrics to relate facial shape to age and anthropometric measures. The two populations differ significantly in facial shape, but the magnitude of this difference is small relative to the variation within each group. Allometric variation for facial shape is similar in both populations, representing a small but significant proportion of total variation in facial shape. Different measures of size are associated with overlapping but statistically distinct aspects of shape variation. Only half of the size-related variation in facial shape can be explained by the first principal component of four size measures and age while the remainder associates distinctly with individual measures. Allometric variation in the human face is complex and should not be regarded as a singular effect. This finding has important implications for how size is treated in studies of human facial shape and for the developmental basis for allometric variation more generally. © 2017 Wiley Periodicals, Inc.

78 FR 19136 - Emergency Relief Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-29

... implementation of the Federal Transit Administration's (FTA) Public Transportation Emergency Relief Program under...-21, Pub. L. 112-141) authorized the Public Transportation Emergency Relief Program at 49 U.S.C. 5324. The Emergency Relief Program allows FTA to make grants for eligible public transportation capital and...

76 FR 57082 - Premium Penalty Relief; Alternative Premium Funding Target Election Relief

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-15

... PENSION BENEFIT GUARANTY CORPORATION Premium Penalty Relief; Alternative Premium Funding Target... situations involving alternative premium funding target elections. FOR FURTHER INFORMATION CONTACT: Catherine...; Alternative Premium Funding Target Elections; Box 5 Relief).\\1\\ \\1\\ http://www.pbgc.gov/res/other-guidance/tu...

19 CFR 210.52 - Motions for temporary relief.

Code of Federal Regulations, 2010 CFR

2010-04-01

....52 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE ADJUDICATION AND ENFORCEMENT Temporary Relief § 210.52 Motions for temporary relief... issuance of temporary relief, the Commission will be guided by practice under Rule 65 of the Federal Rules...

30 CFR 204.213 - May I obtain relief for a property that benefits from other Federal or State incentive programs?

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROPERTIES Accounting and Auditing Relief § 204.213 May I obtain relief for a property that benefits from other Federal or State incentive programs? You may obtain accounting and auditing relief for production...

Meaningful relief with flurbiprofen 8.75 mg spray in patients with sore throat due to upper respiratory tract infection.

PubMed

de Looze, Ferdinandus; Russo, Marc; Bloch, Mark; Montgomery, Barney; Shephard, Adrian; DeVito, Robert

2018-03-01

Evaluate the efficacy of flurbiprofen 8.75 mg spray for sore throat relief. Randomized, double-blind study in adults with sore throat due to upper respiratory tract infection who took flurbiprofen (n = 249) or placebo spray (n = 256). Pain relief was assessed using the Sore Throat Relief Rating Scale. Flurbiprofen spray provided significantly greater relief versus placebo from 20 min to 6 h (p < 0.0001; maximum difference: 75 min). Sore throat severity was reduced ≥-2.2 on the Sore Throat Scale from 75 min to 6 h, indicating meaningful relief. Significantly more patients taking flurbiprofen spray reported ≥30 min of 'at least moderate' relief versus placebo over 6 h (p < 0.0001). Most adverse events were mild. Flurbiprofen spray provides rapid, long-lasting and clinically meaningful relief from sore throat (ANZCTR: ACTRN12612000457842).

Treatments for Chronic Pain in Persons With Spinal Cord Injury: A Survey Study

PubMed Central

Cardenas, Diana D; Jensen, Mark P

2006-01-01

Background/Objective: To determine the degree and duration of pain relief provided by specific pain treatments used by individuals with spinal cord injury (SCI) who have chronic pain. Design: Postal survey. Setting: Community. Participants: Participants were 117 individuals who had traumatic SCI, were 18 years of age or older, and reported a chronic pain problem. Main Outcome Measures: Questions assessing current or past use of 26 different pain treatments, the amount of relief each treatment provided, and the length of time that any pain relief usually lasts. Results: The medications tried most often were nonsteroidal anti-inflammatory drugs (tried by 71%) and acetaminophen (tried by 70%); these medications were still being used by more than one half of the patients who had tried them. Opioids produced the greatest degree of pain relief on average (mean, 6.27 ± 3.05 [SD] on a 0–10 scale, with 0 = no relief and 10 = complete relief) but were unlikely to be continued by those who tried them. Although 38% of respondents with pain had tried gabapentin, only 17% were still using it, and average pain relief was only moderate (mean, 3.32 ± 3.03 on the 0–10 relief scale). Seventy-three percent of the respondents had tried at least 1 of 7 alternative pain treatments, and the most frequently tried were massage, marijuana, and acupuncture. The most relief was provided by massage (mean, 6.05 ± 2.47] on the 0–10 relief scale) and marijuana (mean, 6.62 ± 2.54 on the 0–10 relief scale). The relief from the various treatments, including most medications, tended to last only minutes or hours; however, pain relief from alternative treatments such as massage, acupuncture, and hypnosis was reported to last for days in 25% to 33% of those who tried these treatments. Conclusions: Many patients are not finding adequate pain relief from commonly prescribed medications. Alternative therapies should be considered as additional treatment options in this population. PMID:16739554

Simple Parametric Model for Airfoil Shape Description

NASA Astrophysics Data System (ADS)

Ziemkiewicz, David

2017-12-01

We show a simple, analytic equation describing a class of two-dimensional shapes well suited for representation of aircraft airfoil profiles. Our goal was to create a description characterized by a small number of parameters with easily understandable meaning, providing a tool to alter the shape with optimization procedures as well as manual tweaks by the designer. The generated shapes are well suited for numerical analysis with 2D flow solving software such as XFOIL.

How We Got Here: Evolutionary Changes in Skull Shape in Humans & Their Ancestors

ERIC Educational Resources Information Center

Price, Rebecca M.

2012-01-01

This activity uses inquiry to investigate how large changes in shape can evolve from small changes in the timing of development. Students measure skull shape in fetal, infant, juvenile, and adult chimpanzees and compare them to adult skulls of "Homo sapiens," "Homo erectus," and "Australopithecus afarensis." They conclude by re-interpreting their…

Direct Magnetic Relief Recording Using As40S60: Mn-Se Nanocomposite Multilayer Structures.

PubMed

Stronski, A; Achimova, E; Paiuk, O; Meshalkin, A; Prisacar, A; Triduh, G; Oleksenko, P; Lytvyn, P

2017-12-01

Processes of holographic recording of surface relief structures using As 2 S 3 :Mn-Se multilayer nanostructures as registering media were studied in this paper. Optical properties of As 2 S 3 :Mn, Se layers, and As 2 S 3 :Mn-Se multilayer nanostructures were investigated. Values of optical bandgaps were obtained from Tauc dependencies. Surface relief diffraction gratings were recorded. Direct one-stage formation of surface relief using multilayer nanostructures is considered. For the first time, possibility of direct formation of magnetic relief simultaneous with surface relief formation under optical recording using As 2 S 3 :Mn-Se multilayer nanostructures is shown.

Bas-Relief Modeling from Normal Images with Intuitive Styles.

PubMed

Ji, Zhongping; Ma, Weiyin; Sun, Xianfang

2014-05-01

Traditional 3D model-based bas-relief modeling methods are often limited to model-dependent and monotonic relief styles. This paper presents a novel method for digital bas-relief modeling with intuitive style control. Given a composite normal image, the problem discussed in this paper involves generating a discontinuity-free depth field with high compression of depth data while preserving or even enhancing fine details. In our framework, several layers of normal images are composed into a single normal image. The original normal image on each layer is usually generated from 3D models or through other techniques as described in this paper. The bas-relief style is controlled by choosing a parameter and setting a targeted height for them. Bas-relief modeling and stylization are achieved simultaneously by solving a sparse linear system. Different from previous work, our method can be used to freely design bas-reliefs in normal image space instead of in object space, which makes it possible to use any popular image editing tools for bas-relief modeling. Experiments with a wide range of 3D models and scenes show that our method can effectively generate digital bas-reliefs.

Does pain relief by CT-guided indirect cervical nerve root injection with local anesthetics and steroids predict pain relief after decompression surgery for cervical nerve root compression?

PubMed

Antoniadis, Alexander; Dietrich, Tobias J; Farshad, Mazda

2016-10-01

The relationship of pain relief from a recently presented CT-guided indirect cervical nerve root injection with local anesthetics and steroids to surgical decompression as a treatment for single-level cervical radiculopathy is not clear. This retrospective study aimed to compare the immediate and 6-week post-injection effects to the short- and long-term outcomes after surgical decompression, specifically in regard to pain relief. Patients (n = 39, age 47 ± 10 years) who had undergone CT-guided indirect injection with local anesthetics and steroids as an initial treatment for single cervical nerve root radiculopathy and who subsequently needed surgical decompression were included retrospectively. Pain levels (VAS scores) were monitored before, immediately after, and 6 weeks after injection (n = 34), as well as 6 weeks (n = 38) and a mean of 25 months (SD ± 12) after surgical decompression (n = 36). Correlation analysis was performed to find potential associations of pain relief after injection and after surgery to investigate the predictive value of post-injection pain relief. There was no correlation between immediate pain relief after injection (-32 ± 27 %) and 6 weeks later (-7 ± 19 %), (r = -0.023, p = 0.900). There was an association by tendency between immediate pain relief after injection and post-surgical pain relief at 6 weeks (-82 ± 27 %), (r = 0.28, p = 0.08). Pain relief at follow-up remained high at -70 ± 21 % and was correlated with the immediate pain amelioration effect of the injection (r = 0.37, p = 0.032). Five out of seven patients who reported no pain relief from injection had a pain relief from surgery in excess of 50 %. The amount of immediate radiculopathic pain relief after indirect cervical nerve root injection is associated with the amount of pain relief achieved at long-term follow-up after surgical decompression of single-level cervical radiculopathy. Patients can still expect sufficient pain relief from surgery even if they did not respond to the cervical infiltration.

Paleodictyon nodosum: A living fossil on the deep-sea floor

NASA Astrophysics Data System (ADS)

Rona, Peter A.; Seilacher, Adolf; de Vargas, Colomban; Gooday, Andrew J.; Bernhard, Joan M.; Bowser, Sam; Vetriani, Costantino; Wirsen, Carl O.; Mullineaux, Lauren; Sherrell, Robert; Frederick Grassle, J.; Low, Stephen; Lutz, Richard A.

2009-09-01

We report new in situ observations and laboratory studies of specimens of a small (diameter 2.4-7.5 cm) strikingly hexagonal form originally described from sedimented steps in a wall of the axial valley of the Mid-Atlantic Ridge (water depth 3430-3575 m) near 26°N, 45°W that appears to be identical to the iconic form Paleodictyon nodosum described as a trace fossil from Eocene flysch deposits at sites in Europe and Wales. Our findings follow: The form is apparently agglutinated in sea floor sediment (a veneer of calcareous lutite over red metalliferous sediment) and consists of three equidistant rows of tiny holes (diameter ˜1 mm) that intersect at an angle of 120° and continuously connect through vertical shafts (length 2-3 mm) with an underlying horizontal network of tubes or tunnels identical with the fossil form. The number of rows of holes and spacing of rows increase with overall diameter of the form indicative of organic growth. The form is shaped like a shield surrounded by a lip and moat with surface relief (˜0.5 cm) that is absent in the fossil form. The surface relief exposes the underlying red sediment and may have been produced either by excavation (constructional origin) or by infaunal growth (body form). Protoplasm is absent in recovered specimens, as indicated by negative results of staining techniques, explained by either initial absence or loss. Genetic sequencing of material from the form identified different foraminifera that had settled on the pattern of holes which acts as a baffle to trap organic matter. Models in flume tanks show that the shield-like form deflects flow of ocean currents into a self-ventilating structure capable of aerating and of circulating organic particles through the tubes or tunnels. Microbial counting techniques indicated background abundances within and outside the form. We come to two alternative interpretations of the findings resolvable with further studies: The modern P. nodosum is a burrow consistent with interpretation of the ancient form as a trace fossil. The modern P. nodosum is a compressed form of a hexactinellid sponge adapted to a sedimentary substrate, which means that the ancient form is a body fossil with possible affinity to the Ediacara fauna.

A Neurogenetic Dissociation between Punishment-, Reward-, and Relief-Learning in Drosophila

PubMed Central

Yarali, Ayse; Gerber, Bertram

2010-01-01

What is particularly worth remembering about a traumatic experience is what brought it about, and what made it cease. For example, fruit flies avoid an odor which during training had preceded electric shock punishment; on the other hand, if the odor had followed shock during training, it is later on approached as a signal for the relieving end of shock. We provide a neurogenetic analysis of such relief learning. Blocking, using UAS-shibirets1, the output from a particular set of dopaminergic neurons defined by the TH-Gal4 driver partially impaired punishment learning, but left relief learning intact. Thus, with respect to these particular neurons, relief learning differs from punishment learning. Targeting another set of dopaminergic/serotonergic neurons defined by the DDC-Gal4 driver on the other hand affected neither punishment nor relief learning. As for the octopaminergic system, the tbhM18 mutation, compromising octopamine biosynthesis, partially impaired sugar-reward learning, but not relief learning. Thus, with respect to this particular mutation, relief learning, and reward learning are dissociated. Finally, blocking output from the set of octopaminergic/tyraminergic neurons defined by the TDC2-Gal4 driver affected neither reward, nor relief learning. We conclude that regarding the used genetic tools, relief learning is neurogenetically dissociated from both punishment and reward learning. This may be a message relevant also for analyses of relief learning in other experimental systems including man. PMID:21206762

Refuge alternatives relief valve testing and design with updated test stand

PubMed Central

Lutz, T.J.; Bissert, P.T.; Homce, G.T.; Yonkey, J.A.

2018-01-01

Underground refuge alternatives require an air source to supply breathable air to the occupants. This requires pressure relief valves to prevent unsafe pressures from building up within the refuge alternative. The U.S. Mine Safety and Health Administration (MSHA) mandates that pressure relief valves prevent pressure from exceeding 1.25 kPa (0.18 psi), or as specified by the manufacturer, above mine atmospheric pressure when a fan or compressor is used for the air supply. The U.S. National Institute for Occupational Safety and Health (NIOSH) tested a variety of pressure relief valves using an instrumented test fixture consisting of data acquisition equipment, a centrifugal blower, ductwork and various sensors to determine if the subject pressure relief valves meet the MSHA requirement. Relief pressures and flow characteristics, including opening pressure and flow rate, were measured for five different pressure relief valves under a variety of conditions. The subject pressure relief valves included two off-the-shelf modified check valves, two check valves used in MSHA-approved built-in-place refuge alternatives, and a commercially available valve that was designed for a steel refuge alternative and is currently being used in some built-in-place refuge alternatives. The test results showed relief pressures ranging from 0.20 to 1.53 kPa (0.03 to 0.22 psi) and flow rates up to 19.3 m3/min (683 scfm). As tested, some of the pressure relief valves did not meet the 1.25 kPa (0.18 psi) relief specification. PMID:29563650

Parents' preferences strongly influence their decisions to withhold prescribed opioids when faced with analgesic trade-off dilemmas for children: a prospective observational study.

PubMed

Voepel-Lewis, Terri; Zikmund-Fisher, Brian J; Smith, Ellen Lavoie; Zyzanski, Sarah; Tait, Alan R

2015-08-01

Despite parents' stated desire to treat pain in their children, recent studies have critiqued their underuse of prescribed analgesics to treat pain in their children after painful procedures. Parents' analgesic preferences, including their perceived importance of providing pain relief or avoiding adverse drug effects may have important implications for their analgesic decisions, yet no studies have evaluated the influence of preferences on decisions to withhold prescribed opioids for children. We prospectively explored how parents' preferences influenced decisions to withhold prescribed opioids when faced with hypothetical dilemmas and after hospital discharge. Prospective Observational Study Design: Phase 1 included hypothetical analgesic decisions and Phase 2, real analgesic decisions after hospital discharge. Large tertiary care pediatric hospital in the Midwest of the United States. Five-hundred seven parents whose children underwent a painful surgical procedure requiring an opioid prescription were included. At baseline, parents completed surveys assessing their pain relief preference (i.e., their rated importance of pain relief relative to adverse drug event avoidance), preferred treatment thresholds (i.e., pain level at which they would give an opioid), adverse drug event understanding, and hypothetical trade-off decisions (i.e., scenarios presenting variable pain and adverse drug event symptoms in a child). After discharge, parents recorded all analgesics they gave their child as well as pain scores at the time of administration. Higher preference to provide pain relief (over avoid analgesic risk) lessened the likelihood that parents would withhold the prescribed opioid when adverse drug event symptoms were present together with high pain scores in the hypothetical scenarios. Additionally, higher preferred treatment thresholds increased the likelihood of parents withholding opioids during their hypothetical decision-making as well as at home. The strong influence of these preferences weakened the effect of opioid ADE understanding on decisions to withhold opioids when ADEs (i.e., nausea/vomiting or oversedation) were present together with high pain. Findings from this study suggest that preferences strongly influence and may interfere with parents' effective and safe analgesic decision-making when conflicting symptoms (i.e., high pain and an ADE) are present. To improve effective analgesic use, there is a need to shape parents' preferences and improve their understanding of safe actions that will treat pain when ADE symptoms are present. Copyright © 2015 Elsevier Ltd. All rights reserved.

A multicentre, randomised, double-blind, single-dose study assessing the efficacy of AMC/DCBA Warm lozenge or AMC/DCBA Cool lozenge in the relief of acute sore throat

PubMed Central

2011-01-01

Background Clinically proven over-the-counter (OTC) treatment options are becoming increasingly important in the self-management of acute sore throat. The aim of this study was to determine the analgesic and sensorial benefits of two different amylmetacresol/2,4-dichlorobenzyl alcohol (AMC/DCBA) throat lozenge formulation variants, AMC/DCBA Warm lozenge and AMC/DCBA Cool lozenge, compared with an unflavoured, non-medicated placebo lozenge in the relief of acute sore throat due to upper respiratory tract infections. Methods In this multicentre, randomised, double-blind, single-dose study, 225 adult patients with acute sore throat were randomly assigned to receive either one AMC/DCBA Warm lozenge (n = 77), one AMC/DCBA Cool lozenge (n = 74) or one unflavoured, non-medicated lozenge (matched for size, shape and demulcency; n = 74). After baseline assessments, patients received their assigned lozenge and completed four rating assessments at 11 timepoints from 1 to 120 minutes post dose. Analgesic properties were assessed by comparing severity of throat soreness and sore throat relief ratings. Difficulty in swallowing, throat numbness, functional, sensorial and emotional benefits were also assessed. Results Both the AMC/DCBA Warm and AMC/DCBA Cool lozenge induced significant analgesic, functional, sensorial and emotional effects compared with the unflavoured, non-medicated lozenge. Sore throat relief, improvements in throat soreness and difficulty in swallowing, and throat numbness were observed as early as 1-5 minutes, and lasted up to 2 hours post dose. Sensorial benefits of warming and cooling associated with the AMC/DCBA Warm and AMC/DCBA Cool lozenge, respectively, were experienced soon after first dose, and in the case of the latter, it lasted long after the lozenge had dissolved. Emotional benefits of feeling better, happier, less distracted and less frustrated were reported in those taking either of the AMC/DCBA throat lozenge variants, with no differences in adverse events compared with the unflavoured, non-medicated lozenge. Conclusions AMC/DCBA Warm and AMC/DCBA Cool lozenges are well-tolerated and effective OTC treatment options, offering functional, sensorial and emotional benefits to patients with acute sore throat, over and above that of the rapid efficacy effects provided. Trial registration ISRCTN: ISRCTN00003567 PMID:21332976

Parenteral opioids for maternal pain management in labour

PubMed Central

Ullman, Roz; Smith, Lesley A; Burns, Ethel; Mori, Rintaro; Dowswell, Therese

2014-01-01

Background Parenteral opioids are used for pain relief in labour in many countries throughout the world. Objectives To assess the acceptability, effectiveness and safety of different types, doses and modes of administration of parenteral opioids given to women in labour. Search methods We searched the Cochrane Pregnancy and Childbirth Group’s Trials Register (30 April 2011) and reference lists of retrieved studies. Selection criteria We included randomised controlled trials examining the use of intramuscular or intravenous opioids (including patient controlled analgesia) for women in labour. We looked at studies comparing an opioid with another opioid, placebo, other non-pharmacological interventions (TENS) or inhaled analgesia. Data collection and analysis At least two review authors independently assessed study eligibility, collected data and assessed risk of bias. Main results We included 57 studies involving more than 7000 women that compared an opioid with placebo, another opioid administered intramuscularly or intravenously or compared with TENS to the back. The 57 studies reported on 29 different comparisons, and for many outcomes only one study contributed data. Overall, the evidence was of poor quality regarding the analgesic effect of opioids, satisfaction with analgesia, adverse effects and harm to women and babies. There were few statistically significant results. Many of the studies had small sample sizes, and low statistical power. Overall findings indicated that parenteral opioids provided some pain relief and moderate satisfaction with analgesia in labour, although up to two-thirds of women who received opioids reported moderate or severe pain and/or poor or moderate pain relief one or two hours after administration. Opioid drugs were associated with maternal nausea, vomiting and drowsiness, although different opioid drugs were associated with different adverse effects. There was no clear evidence of adverse effects of opioids on the newborn. We did not have sufficient evidence to assess which opioid drug provided the best pain relief with the least adverse effects. Authors’ conclusions Parenteral opioids provide some relief from pain in labour but are associated with adverse effects. Maternal satisfaction with opioid analgesia was largely unreported but appeared moderate at best. This review needs to be examined alongside related Cochrane reviews examining pain management in labour. More research is needed to determine which analgesic intervention is most effective, and provides greatest satisfaction to women with acceptable adverse effects for mothers and their newborn. PMID:20824859

Latin-American guidelines for opioid use in chronic nononcologic pain.

PubMed

Lara-Solares, Argelia; Aguayo Zamora, Carlos; Amescua García, César; Garcia, João Batista Santos; Berenguel Cook, María Del Rosario; Bonilla Sierra, Patricia; Campos Kraychete, Durval; Flores Cantisani, José Alberto; Guerrero, Carlos; Guillén Núñez, María Del Rocío; Hernández Castro, John Jairo; Hernández Ortíz, Andrés; Jreige Iskandar, Aziza; Lech, Osvandré; Macías Guerra, Jacqueline; Ramírez Samayoa, Gerardo; Rangel Morillo, Edwin; Rico Pazos, María Antonieta; Sempértegui Gallegos, Manuel

2017-05-01

Latin-American experts in the use of opioids in patients with chronic nononcologic pain (CNOP) have updated existing recommendations to current Latin-American reality. Several key opinion leaders from Latin America participated in a face-to-face meeting in Guatemala (April 2015) to discuss the use of opioids in CNOP. Subgroups of experts worked on specific topics, reviewed the literature and shaped the final manuscript. The expert panel developed guidelines taking into consideration the utility of both opioid and nonopioid analgesics and factors pertaining to their efficacy, safety, adherence, administration and risks for abuse/addiction. Latin-American guidelines for the use of opioids in CNOP should improve pain relief and patients' quality of life by increasing access to these effective agents.

Security hologram foil labels with a design facilitating authenticity testing: effects of mechanical bending of substrates with the glued on holograms

NASA Astrophysics Data System (ADS)

Aubrecht, Ivo

2015-05-01

Optimal design of security holograms or diffractive optically variable image devices (DOVIDs) that would be complex enough to deter counterfeiters from attempts of mimicking but contains features readily recognizable by laymen has been addressed by many experts. This paper tries to discuss effects of mechanical bending of a flexible substrate to visual appearance of a glued-on foil DOVID. Initially plane, the DOVID is deformed to a convex- or concave-shaped curved surface. Theoretical analyses and experimental results assume the surface to be a cylindrical segment and concern rainbow-type surface-relief holograms that are recorded piecewise in a photoresist material, coated on planar and non-planar substrates.

30 CFR 203.53 - What relief will MMS grant?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What relief will MMS grant? 203.53 Section 203.53 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE MANAGEMENT RELIEF OR REDUCTION IN ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief for End-Of...

Crisis Communication Practices at an International Relief Agency

ERIC Educational Resources Information Center

Genova, Gina L.

2006-01-01

When a disaster strikes, the affected population relies upon the swift response and aid rendered by relief organizations such as the California-based Direct Relief International. Since 1948, Direct Relief's mission has been to provide essential material resources to locally run health programs in areas affected by natural disasters, wars, and…

40 CFR 65.110 - Standards: Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief...

Code of Federal Regulations, 2011 CFR

2011-07-01

..., and agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and..., valves, connectors, and agitators in heavy liquid service; pressure relief devices in light liquid or...

40 CFR 63.1010 - Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief devices in...

Code of Federal Regulations, 2012 CFR

2012-07-01

... agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation systems..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and... heavy liquid service; pressure relief devices in light liquid or heavy liquid service; and...

40 CFR 63.1010 - Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief devices in...

Code of Federal Regulations, 2014 CFR

2014-07-01

... agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation systems..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and... heavy liquid service; pressure relief devices in light liquid or heavy liquid service; and...

40 CFR 65.110 - Standards: Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief...

Code of Federal Regulations, 2013 CFR

2013-07-01

..., and agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and..., valves, connectors, and agitators in heavy liquid service; pressure relief devices in light liquid or...

40 CFR 63.1010 - Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief devices in...

Code of Federal Regulations, 2013 CFR

2013-07-01

... agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation systems..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and... heavy liquid service; pressure relief devices in light liquid or heavy liquid service; and...

40 CFR 65.110 - Standards: Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief...

Code of Federal Regulations, 2014 CFR

2014-07-01

..., and agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and..., valves, connectors, and agitators in heavy liquid service; pressure relief devices in light liquid or...

40 CFR 65.110 - Standards: Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief...

Code of Federal Regulations, 2012 CFR

2012-07-01

..., and agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and..., valves, connectors, and agitators in heavy liquid service; pressure relief devices in light liquid or...

49 CFR 178.345-10 - Pressure relief.

Code of Federal Regulations, 2010 CFR

2010-10-01

... applicable individual specification. The pressure and vacuum relief system must be designed to operate and... resulting from loading, unloading, or from heating and cooling of lading. Pressure relief systems are not required to conform to the ASME Code. (b) Type and construction of relief systems and devices. (1) Each...

19 CFR 210.68 - Complainant's temporary relief bond.

Code of Federal Regulations, 2010 CFR

2010-04-01

... bond is being posted, the amount of the bond, the effective date and duration of the bond (as... 19 Customs Duties 3 2010-04-01 2010-04-01 false Complainant's temporary relief bond. 210.68... relief bond. (a) In every investigation under this part involving a motion for temporary relief, the...

40 CFR 63.1010 - Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief devices in...

Code of Federal Regulations, 2010 CFR

2010-07-01

... agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation systems..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and... heavy liquid service; pressure relief devices in light liquid or heavy liquid service; and...

40 CFR 65.110 - Standards: Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief...

Code of Federal Regulations, 2010 CFR

2010-07-01

..., and agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and..., valves, connectors, and agitators in heavy liquid service; pressure relief devices in light liquid or...

49 CFR 178.345-10 - Pressure relief.

Code of Federal Regulations, 2012 CFR

2012-10-01

... cargo tank must be provided with a primary pressure relief system consisting of one or more reclosing... parallel with the primary pressure relief system may be used to augment the total venting capacity of the cargo tank. Non-reclosing pressure relief devices are not authorized in any cargo tank except when in...

49 CFR 178.345-10 - Pressure relief.

Code of Federal Regulations, 2011 CFR

2011-10-01

... cargo tank must be provided with a primary pressure relief system consisting of one or more reclosing... parallel with the primary pressure relief system may be used to augment the total venting capacity of the cargo tank. Non-reclosing pressure relief devices are not authorized in any cargo tank except when in...

49 CFR 178.345-10 - Pressure relief.

Code of Federal Regulations, 2014 CFR

2014-10-01

... cargo tank must be provided with a primary pressure relief system consisting of one or more reclosing... parallel with the primary pressure relief system may be used to augment the total venting capacity of the cargo tank. Non-reclosing pressure relief devices are not authorized in any cargo tank except when in...

49 CFR 178.345-10 - Pressure relief.

Code of Federal Regulations, 2013 CFR

2013-10-01

... cargo tank must be provided with a primary pressure relief system consisting of one or more reclosing... parallel with the primary pressure relief system may be used to augment the total venting capacity of the cargo tank. Non-reclosing pressure relief devices are not authorized in any cargo tank except when in...

Rodent density and the landscape of fear in the Chihuahaun Desert

USDA-ARS?s Scientific Manuscript database

Small mammals in desert environments are important links in ecosystem energy flow, with their densities often effecting the abundance of their primarily predators. Granivorous small mammals also affect seed dispersal and can shape vegetation characteristics. Consequently, factors affecting small m...

Robust lung identification in MSCT via controlled flooding and shape constraints: dealing with anatomical and pathological specificity

NASA Astrophysics Data System (ADS)

Fetita, Catalin; Tarando, Sebastian; Brillet, Pierre-Yves; Grenier, Philippe A.

2016-03-01

Correct segmentation and labeling of lungs in thorax MSCT is a requirement in pulmonary/respiratory disease analysis as a basis for further processing or direct quantitative measures: lung texture classification, respiratory functional simulations, intrapulmonary vascular remodeling evaluation, detection of pleural effusion or subpleural opacities, are only few clinical applications related to this requirement. Whereas lung segmentation appears trivial for normal anatomo-pathological conditions, the presence of disease may complicate this task for fully-automated algorithms. The challenges come either from regional changes of lung texture opacity or from complex anatomic configurations (e.g., thin septum between lungs making difficult proper lung separation). They make difficult or even impossible the use of classic algorithms based on adaptive thresholding, 3-D connected component analysis and shape regularization. The objective of this work is to provide a robust segmentation approach of the pulmonary field, with individualized labeling of the lungs, able to overcome the mentioned limitations. The proposed approach relies on 3-D mathematical morphology and exploits the concept of controlled relief flooding (to identify contrasted lung areas) together with patient-specific shape properties for peripheral dense tissue detection. Tested on a database of 40 MSCT of pathological lungs, the proposed approach showed correct identification of lung areas with high sensitivity and specificity in locating peripheral dense opacities.

Effect of milling on particle shape and surface energy heterogeneity of needle-shaped crystals.

PubMed

Ho, Raimundo; Naderi, Majid; Heng, Jerry Y Y; Williams, Daryl R; Thielmann, Frank; Bouza, Peter; Keith, Adam R; Thiele, Greg; Burnett, Daniel J

2012-10-01

Milling and micronization of particles are routinely employed in the pharmaceutical industry to obtain small particles with desired particle size characteristics. The aim of this study is to demonstrate that particle shape is an important factor affecting the fracture mechanism in milling. Needle-shaped crystals of the β polymorph of D-mannitol were prepared from recrystallization in water. A portion of the recrystallized materials was ball-milled. Unmilled and milled sieved fractions of recrystallized D-mannitol were analyzed by dynamic image analysis (DIA) and inverse gas chromatography (IGC) at finite concentration to explain the breakage/fracture behavior. In the process of ball-milling, D-mannitol preferentially fractured along their shortest axis, exposing (011) plane with increased hydrophilicity and increased bounding rectangular aspect ratio. This is in contrary to attachment energy modeling which predicts a fracture mechanism across the (010) plane with increased hydrophobicity, and small change in particle shape. Crystal size, and more importantly, crystal shape and facet-specific mechanical properties, can dictate the fracture/cleavage behavior of organic crystalline materials. Thorough understanding of the crystal slip systems, combining attachment energy prediction with particle shape and surface characterization using DIA and IGC, are important in understanding fracture behavior of organic crystalline solids in milling and micronization.

Making the Most of Small Effects

ERIC Educational Resources Information Center

Thompson, Ross A.

2009-01-01

The idea that classroom social ecologies are shaped by the aggregate effects of peers' prior care experiences is provocative, even though the evidence is weak that this explains the small and diminishing effect of childcare experience in the National Institute of Child Health and Human Development study. Small effects may indeed be small effects,…

Many P-Element Insertions Affect Wing Shape in Drosophila melanogaster

PubMed Central

Weber, Kenneth; Johnson, Nancy; Champlin, David; Patty, April

2005-01-01

A screen of random, autosomal, homozygous-viable P-element insertions in D. melanogaster found small effects on wing shape in 11 of 50 lines. The effects were due to single insertions and remained stable and significant for over 5 years, in repeated, high-resolution measurements. All 11 insertions were within or near protein-coding transcription units, none of which were previously known to affect wing shape. Many sites in the genome can affect wing shape. PMID:15545659

Many P-element insertions affect wing shape in Drosophila melanogaster.

PubMed

Weber, Kenneth; Johnson, Nancy; Champlin, David; Patty, April

2005-03-01

A screen of random, autosomal, homozygous-viable P-element insertions in D. melanogaster found small effects on wing shape in 11 of 50 lines. The effects were due to single insertions and remained stable and significant for over 5 years, in repeated, high-resolution measurements. All 11 insertions were within or near protein-coding transcription units, none of which were previously known to affect wing shape. Many sites in the genome can affect wing shape.

Circuit breaker lock out assembly

DOEpatents

Gordy, W.T.

1983-05-18

A lock out assembly for a circuit breaker which consists of a generally step-shaped unitary base with an aperture in the small portion of the step-shaped base and a roughly S shaped retaining pin which loops through the large portion of the step-shaped base. The lock out assembly is adapted to fit over a circuit breaker with the handle switch projecting through the aperture, and the retaining pin projecting into an opening of the handle switch, preventing removal.

Circuit breaker lock out assembly

DOEpatents

Gordy, Wade T.

1984-01-01

A lock out assembly for a circuit breaker which consists of a generally step-shaped unitary base with an aperture in the small portion of the step-shaped base and a roughly "S" shaped retaining pin which loops through the large portion of the step-shaped base. The lock out assembly is adapted to fit over a circuit breaker with the handle switch projecting through the aperture, and the retaining pin projecting into an opening of the handle switch, preventing removal.

The Constructed Relief: Put the Carving Tools Away and Build a Sculpture.

ERIC Educational Resources Information Center

Kostyniuk, Ron

1990-01-01

Describes origins of the constructed relief and shows some examples of contemporary artists' work. Suggests using this history to motivate students to construct their own reliefs. Outlines a four-step lesson: preliminary drawing, finished drawing, mock-up relief, and finished construction using durable materials, such as wood, acrylic sheet, or…

21 CFR 358.310 - Ingrown toenail relief active ingredient.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 5 2011-04-01 2011-04-01 false Ingrown toenail relief active ingredient. 358.310 Section 358.310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Toenail Relief Drug Products § 358.310 Ingrown toenail relief active ingredient. The active ingredient of...

21 CFR 358.310 - Ingrown toenail relief active ingredient.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Ingrown toenail relief active ingredient. 358.310 Section 358.310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Toenail Relief Drug Products § 358.310 Ingrown toenail relief active ingredient. The active ingredient of...

21 CFR 358.310 - Ingrown toenail relief active ingredient.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 21 Food and Drugs 5 2013-04-01 2013-04-01 false Ingrown toenail relief active ingredient. 358.310 Section 358.310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Toenail Relief Drug Products § 358.310 Ingrown toenail relief active ingredient. The active ingredient of...

21 CFR 358.310 - Ingrown toenail relief active ingredient.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 5 2012-04-01 2012-04-01 false Ingrown toenail relief active ingredient. 358.310 Section 358.310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Toenail Relief Drug Products § 358.310 Ingrown toenail relief active ingredient. The active ingredient of...

21 CFR 358.310 - Ingrown toenail relief active ingredient.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 5 2014-04-01 2014-04-01 false Ingrown toenail relief active ingredient. 358.310 Section 358.310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Toenail Relief Drug Products § 358.310 Ingrown toenail relief active ingredient. The active ingredient of...

47 CFR 69.727 - Regulatory relief.

Code of Federal Regulations, 2010 CFR

2010-10-01

... customer. (b) Phase II relief. Upon satisfaction of the Phase II triggers specified in §§ 69.709(c) or 69... Pricing Flexibility § 69.727 Regulatory relief. (a) Phase I relief. Upon satisfaction of the Phase I... similarly situated customers; and (ii) The price cap LEC excludes all contract tariff offerings from price...

40 CFR 63.1029 - Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief devices in...

Code of Federal Regulations, 2014 CFR

2014-07-01

... agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation systems..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and... in heavy liquid service; pressure relief devices in light liquid or heavy liquid service; and...

49 CFR 179.500-12 - Pressure relief devices.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Pressure relief devices. 179.500-12 Section 179... Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-12 Pressure relief devices. (a) Tank shall be equipped with one or more pressure relief devices of...

49 CFR 179.500-12 - Pressure relief devices.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Pressure relief devices. 179.500-12 Section 179... Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-12 Pressure relief devices. (a) Tank shall be equipped with one or more pressure relief devices of...

49 CFR 179.500-12 - Pressure relief devices.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Pressure relief devices. 179.500-12 Section 179... Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-12 Pressure relief devices. (a) Tank shall be equipped with one or more pressure relief devices of...

40 CFR 63.1029 - Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief devices in...

Code of Federal Regulations, 2011 CFR

2011-07-01

... agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation systems..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and... in heavy liquid service; pressure relief devices in light liquid or heavy liquid service; and...

40 CFR 63.1029 - Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief devices in...

Code of Federal Regulations, 2013 CFR

2013-07-01

... agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation systems..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and... in heavy liquid service; pressure relief devices in light liquid or heavy liquid service; and...

40 CFR 63.1029 - Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief devices in...

Code of Federal Regulations, 2012 CFR

2012-07-01

... agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation systems..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and... in heavy liquid service; pressure relief devices in light liquid or heavy liquid service; and...

49 CFR 179.500-16 - Tests of pressure relief devices.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Tests of pressure relief devices. 179.500-16... FOR TANK CARS Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-16 Tests of pressure relief devices. (a) Pressure relief valves shall be...

49 CFR 179.500-12 - Pressure relief devices.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Pressure relief devices. 179.500-12 Section 179... Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-12 Pressure relief devices. (a) Tank shall be equipped with one or more pressure relief devices of...

30 CFR 204.204 - What accounting and auditing relief will MMS not allow?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What accounting and auditing relief will MMS... INTERIOR MINERALS REVENUE MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES Accounting and Auditing Relief § 204.204 What accounting and auditing relief will MMS not allow? MMS will not approve your request for...

30 CFR 203.80 - When can I get royalty relief if I am not eligible for royalty relief under other sections in the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief for Pre-Act Deep Water Leases and for... you may apply for royalty relief apart from our programs for end-of-life leases or for pre-Act deep...

12 CFR 303.248 - Truth in Lending Act-Relief from reimbursement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Truth in Lending Act-Relief from reimbursement... PRACTICE FILING PROCEDURES Other Filings § 303.248 Truth in Lending Act—Relief from reimbursement. (a) Scope. This section applies to requests for relief from reimbursement pursuant to the Truth in Lending...

40 CFR 63.1029 - Pumps, valves, connectors, and agitators in heavy liquid service; pressure relief devices in...

Code of Federal Regulations, 2010 CFR

2010-07-01

... agitators in heavy liquid service; pressure relief devices in liquid service; and instrumentation systems..., connectors, and agitators in heavy liquid service; pressure relief devices in liquid service; and... in heavy liquid service; pressure relief devices in light liquid or heavy liquid service; and...

Relief Presentation on US National Park Service Maps

NASA Astrophysics Data System (ADS)

Patterson, Tom

2018-05-01

This paper examines the evolution of relief presentations on maps developed by Harpers Ferry Center, the media service center of the US National Park Service (NPS). Harpers Ferry Center produces the maps used by park visitors. I will discuss five park maps, each with a distinctive relief style and mode of production. They appear in rough chronological order of their development. Recent relief presentations are generally more detailed, colorful, and realistic than those from earlier years. Changing technology is largely responsible for the different relief styles found on park maps. Some relief treatments today were not possible, or imaginable, in 1977 when the NPS established the brochure program in its modern phase. Landscape heterogeneity is another factor behind the development of different relief styles. With over 400 park sites ranging from the glacial mountains of Alaska to the rolling piedmont of Virginia, a one-style-fits-all approach cannot adequately depict all landscapes. NPS maps serve some 300 million park visitors each year. Our ongoing effort to make understandable maps for this diverse audience has further spurred experiments in relief presentation.

How a Visual Language of Abstract Shapes Facilitates Cultural and International Border Crossings

ERIC Educational Resources Information Center

Conroy, Arthur Thomas, III

2016-01-01

This article describes a visual language comprised of abstract shapes that has been shown to be effective in communicating prior knowledge between and within members of a small team or group. The visual language includes a set of geometric shapes and rules that guide the construction of the abstract diagrams that are the external representation of…

Oscillatory neural representations in the sensory thalamus predict neuropathic pain relief by deep brain stimulation.

PubMed

Huang, Yongzhi; Green, Alexander L; Hyam, Jonathan; Fitzgerald, James; Aziz, Tipu Z; Wang, Shouyan

2018-01-01

Understanding the function of sensory thalamic neural activity is essential for developing and improving interventions for neuropathic pain. However, there is a lack of investigation of the relationship between sensory thalamic oscillations and pain relief in patients with neuropathic pain. This study aims to identify the oscillatory neural characteristics correlated with pain relief induced by deep brain stimulation (DBS), and develop a quantitative model to predict pain relief by integrating characteristic measures of the neural oscillations. Measures of sensory thalamic local field potentials (LFPs) in thirteen patients with neuropathic pain were screened in three dimensional feature space according to the rhythm, balancing, and coupling neural behaviours, and correlated with pain relief. An integrated approach based on principal component analysis (PCA) and multiple regression analysis is proposed to integrate the multiple measures and provide a predictive model. This study reveals distinct thalamic rhythms of theta, alpha, high beta and high gamma oscillations correlating with pain relief. The balancing and coupling measures between these neural oscillations were also significantly correlated with pain relief. The study enriches the series research on the function of thalamic neural oscillations in neuropathic pain and relief, and provides a quantitative approach for predicting pain relief by DBS using thalamic neural oscillations. Copyright © 2017 Elsevier Inc. All rights reserved.

Reward, motivation and emotion of pain and its relief

PubMed Central

Porreca, Frank; Navratilova, Edita

2016-01-01

The experience of pain depends on interpretation of context and past experience that guide the choice of an immediate behavioral response and influence future decisions of actions to avoid harm. The aversive qualities of pain underlie its physiological role in learning and motivation. In this review, we highlight findings from human and animal investigations that suggest that both pain, and the relief of pain, are complex emotions that are comprised of feelings and their motivational consequences. Relief of aversive states, including pain, is rewarding. How relief of pain aversiveness occurs is not well understood. Termination of aversive states can directly provide relief as well as reinforce behaviors that result in avoidance of pain. Emerging preclinical data also suggests that relief may elicit a positive hedonic value that results from activation of neural cortical and mesolimbic brain circuits that may also motivate behavior. Brain circuits mediating the reward of pain relief, as well as relief-induced motivation are significantly impacted as pain becomes chronic. In chronic pain states, the negative motivational value of nociception may be increased while the value of the reward of pain relief may decrease. As a consequence, the impact of pain on these ancient, and conserved brain limbic circuits suggest a path forward for discovery of new pain therapies. PMID:28106670

Spatial variation in selection on corolla shape in a generalist plant is promoted by the preference patterns of its local pollinators.

PubMed

Gómez, José M; Bosch, Jordi; Perfectti, Francisco; Fernández, J D; Abdelaziz, Mohamed; Camacho, J P M

2008-10-07

An adaptive role of corolla shape has been often asserted without an empirical demonstration of how natural selection acts on this trait. In generalist plants, in which flowers are visited by diverse pollinator fauna that commonly vary spatially, detecting pollinator-mediated selection on corolla shape is even more difficult. In this study, we explore the mechanisms promoting selection on corolla shape in the generalist crucifer Erysimum mediohispanicum Polatschek (Brassicaceae). We found that the main pollinators of E. mediohispanicum (large bees, small bees and bee flies) discriminate between different corolla shapes when offered artificial flowers without reward. Importantly, different pollinators prefer different shapes: bees prefer flowers with narrow petals, whereas bee flies prefer flowers with rounded overlapping petals. We also found that flowers with narrow petals (those preferred by bees) produce both more pollen and nectar than those with rounded petals. Finally, different plant populations were visited by different faunas. As a result, we found spatial variation in the selection acting on corolla shape. Selection favoured flowers with narrow petals in the populations where large or small bees are the most abundant pollinator groups. Our study suggests that pollinators, by preferring flowers with high reward, exert strong selection on the E. mediohispanicum corolla shape. The geographical variation in the pollinator-mediated selection on E. mediohispanicum corolla shape suggests that phenotypic evolution and diversification can occur in this complex floral trait even without specialization.

Ice thickness and topographic relief in glaciated landscapes of the western USA

NASA Astrophysics Data System (ADS)

Brocklehurst, Simon H.; Whipple, Kelin X.; Foster, David

2008-05-01

The development of relief in glaciated landscapes plays a crucial role in hypotheses relating climate change and tectonic processes. In particular, glaciers can only be responsible for peak uplift if they are capable of generating significant relief in formerly nonglaciated landscapes. Previous work has suggested that relief in glaciated landscapes should scale with the thickness of the ice. Here we summarise a field-based test of this hypothesis in two mountain ranges in the western United States, the Sierra Nevada, California, and the Sangre de Cristo Range, Colorado. These areas exhibit a range of degrees of glacial occupation during the Quaternary, including some drainage basins essentially unoccupied by ice, allowing a detailed exploration of how relief in different parts of a drainage basin evolves in response to glacial modification. We mapped last glacial maximum (LGM) trimlines to estimate the ice thickness at the equilibrium line altitude during the LGM, and determined several metrics of relief for drainage basins across the full spectrum of LGM ice extents. Comparison between measures of relief and ice thickness estimates indicates that relief production in glaciated mountain belts scales with ice thickness and consequently also drainage area. We extended our study to the Bitterroot Range in Idaho/Montana, and the Teton Range in Wyoming, for a more comprehensive understanding of sub-ridgeline relief, or 'missing mass'. This measure of mean relief is surprisingly little affected by either the degree of glacial modification or the total material removed by glaciers, but appears to be influenced by the more active tectonics of the Teton Range. While the effects of glacial modification on the landscape are clear (valley widening, hanging valley formation), the overall change in the relief structure of the mountain ranges studied here is surprisingly modest.

ReliefSeq: A Gene-Wise Adaptive-K Nearest-Neighbor Feature Selection Tool for Finding Gene-Gene Interactions and Main Effects in mRNA-Seq Gene Expression Data

PubMed Central

McKinney, Brett A.; White, Bill C.; Grill, Diane E.; Li, Peter W.; Kennedy, Richard B.; Poland, Gregory A.; Oberg, Ann L.

2013-01-01

Relief-F is a nonparametric, nearest-neighbor machine learning method that has been successfully used to identify relevant variables that may interact in complex multivariate models to explain phenotypic variation. While several tools have been developed for assessing differential expression in sequence-based transcriptomics, the detection of statistical interactions between transcripts has received less attention in the area of RNA-seq analysis. We describe a new extension and assessment of Relief-F for feature selection in RNA-seq data. The ReliefSeq implementation adapts the number of nearest neighbors (k) for each gene to optimize the Relief-F test statistics (importance scores) for finding both main effects and interactions. We compare this gene-wise adaptive-k (gwak) Relief-F method with standard RNA-seq feature selection tools, such as DESeq and edgeR, and with the popular machine learning method Random Forests. We demonstrate performance on a panel of simulated data that have a range of distributional properties reflected in real mRNA-seq data including multiple transcripts with varying sizes of main effects and interaction effects. For simulated main effects, gwak-Relief-F feature selection performs comparably to standard tools DESeq and edgeR for ranking relevant transcripts. For gene-gene interactions, gwak-Relief-F outperforms all comparison methods at ranking relevant genes in all but the highest fold change/highest signal situations where it performs similarly. The gwak-Relief-F algorithm outperforms Random Forests for detecting relevant genes in all simulation experiments. In addition, Relief-F is comparable to the other methods based on computational time. We also apply ReliefSeq to an RNA-Seq study of smallpox vaccine to identify gene expression changes between vaccinia virus-stimulated and unstimulated samples. ReliefSeq is an attractive tool for inclusion in the suite of tools used for analysis of mRNA-Seq data; it has power to detect both main effects and interaction effects. Software Availability: http://insilico.utulsa.edu/ReliefSeq.php. PMID:24339943

Land cover associations of nesting territories of three sympatric buteos in shortgrass prairie

USGS Publications Warehouse

McConnell, S.; O'Connell, T. J.; Leslie, David M.

2008-01-01

Three species of Buteo hawks nest sympatrically in the southern Great Plains of the United States. Dietary overlap among them is broad and we tested the hypothesis these species partition their breeding habitat spatially. We compared land cover and topography around 224 nests of the three species breeding in shortgrass prairie in 2004 and 2005. Red-tailed Hawks (Buteo jamaicensis) nested almost exclusively in riparian timber surrounded by prairie (95% prairie land cover around nests) and disproportionately used areas with greater topographic relief within prairie landscapes. Swainson's Hawks (B. swainsoni) commonly nested in low-relief areas dominated by small-grain production agriculture but generally used habitats in proportion to availability. Most nest sites of Ferruginous Hawks (B. regalis) were in prairie (78% prairie land cover around nests), but some were in areas that were at least partially agricultural. Ferruginous Hawks had at least two times more sand sagebrush (Artemisia filifolia) around their nests than their two congeners. We conclude that sympatric breeding Buteos on the southern Great Plains spatially partitioned nest sites according to subtle differences in land cover and topography.

Effects of subtle cognitive manipulations on placebo analgesia - An implicit priming study.

PubMed

Rosén, A; Yi, J; Kirsch, I; Kaptchuk, T J; Ingvar, M; Jensen, K B

2017-04-01

Expectancy is widely accepted as a key contributor to placebo effects. However, it is not known whether non-conscious expectancies achieved through semantic priming may contribute to placebo analgesia. In this study, we investigated if an implicit priming procedure, where participants were unaware of the intended priming influence, affected placebo analgesia. In a double-blind experiment, healthy participants (n = 36) were randomized to different implicit priming types; one aimed at increasing positive expectations and one neutral control condition. First, pain calibration (thermal) and a credibility demonstration of the placebo analgesic device were performed. In a second step, an independent experimenter administered the priming task; Scrambled Sentence Test. Then, pain sensitivity was assessed while telling participants that the analgesic device was either turned on (placebo) or turned off (baseline). Pain responses were recorded on a 0-100 Numeric Response Scale. Overall, there was a significant placebo effect (p < 0.001), however, the priming conditions (positive/neutral) did not lead to differences in placebo outcome. Prior experience of pain relief (during initial pain testing) correlated significantly with placebo analgesia (p < 0.001) and explained 34% of placebo variance. Trait neuroticism correlated positively with placebo analgesia (p < 0.05) and explained 21% of placebo variance. Priming is one of many ways to influence behaviour, and non-conscious activation of positive expectations could theoretically affect placebo analgesia. Yet, we found no SST priming effect on placebo analgesia. Instead, our data point to the significance of prior experience of pain relief, trait neuroticism and social interaction with the treating clinician. Our findings challenge the role of semantic priming as a behavioural modifier that may shape expectations of pain relief, and affect placebo analgesia. © 2016 The Authors. European Journal of Pain published by John Wiley & Sons Ltd on behalf of European Pain Federation - EFIC®.

30 CFR 203.52 - What criteria must I meet to get relief?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What criteria must I meet to get relief? 203.52 Section 203.52 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE MANAGEMENT RELIEF OR REDUCTION IN ROYALTY RATES OCS Oil, Gas, and Sulfur General Royalty Relief for End-Of...

46 CFR 154.452 - External pressure.

Code of Federal Regulations, 2012 CFR

2012-10-01

...: P1=the vacuum relief valve setting for tanks with a vacuum relief valve, or 24.5 kPa gauge (3.55 psig) for tanks without a vacuum relief valve. P2=0, or the pressure relief valve setting for an enclosed... weight of the tank, including corrosion allowance, weight of insulation, weight of dome, weight of pipe...

46 CFR 154.452 - External pressure.

Code of Federal Regulations, 2013 CFR

2013-10-01

...: P1=the vacuum relief valve setting for tanks with a vacuum relief valve, or 24.5 kPa gauge (3.55 psig) for tanks without a vacuum relief valve. P2=0, or the pressure relief valve setting for an enclosed... weight of the tank, including corrosion allowance, weight of insulation, weight of dome, weight of pipe...

46 CFR 154.452 - External pressure.

Code of Federal Regulations, 2010 CFR

2010-10-01

...: P1=the vacuum relief valve setting for tanks with a vacuum relief valve, or 24.5 kPa gauge (3.55 psig) for tanks without a vacuum relief valve. P2=0, or the pressure relief valve setting for an enclosed... weight of the tank, including corrosion allowance, weight of insulation, weight of dome, weight of pipe...

46 CFR 154.452 - External pressure.

Code of Federal Regulations, 2014 CFR

2014-10-01

...: P1=the vacuum relief valve setting for tanks with a vacuum relief valve, or 24.5 kPa gauge (3.55 psig) for tanks without a vacuum relief valve. P2=0, or the pressure relief valve setting for an enclosed... weight of the tank, including corrosion allowance, weight of insulation, weight of dome, weight of pipe...

46 CFR 154.452 - External pressure.

Code of Federal Regulations, 2011 CFR

2011-10-01

...: P1=the vacuum relief valve setting for tanks with a vacuum relief valve, or 24.5 kPa gauge (3.55 psig) for tanks without a vacuum relief valve. P2=0, or the pressure relief valve setting for an enclosed... weight of the tank, including corrosion allowance, weight of insulation, weight of dome, weight of pipe...

46 CFR 38.25-10 - Safety relief valves-TB/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Safety relief valves-TB/ALL. 38.25-10 Section 38.25-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS LIQUEFIED FLAMMABLE GASES Periodic Tests and Inspections § 38.25-10 Safety relief valves—TB/ALL. (a) The cargo tank safety relief valves shall...

46 CFR 38.25-10 - Safety relief valves-TB/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Safety relief valves-TB/ALL. 38.25-10 Section 38.25-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS LIQUEFIED FLAMMABLE GASES Periodic Tests and Inspections § 38.25-10 Safety relief valves—TB/ALL. (a) The cargo tank safety relief valves shall...

46 CFR 38.25-10 - Safety relief valves-TB/ALL.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Safety relief valves-TB/ALL. 38.25-10 Section 38.25-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS LIQUEFIED FLAMMABLE GASES Periodic Tests and Inspections § 38.25-10 Safety relief valves—TB/ALL. (a) The cargo tank safety relief valves shall...

46 CFR 38.25-10 - Safety relief valves-TB/ALL.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Safety relief valves-TB/ALL. 38.25-10 Section 38.25-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS LIQUEFIED FLAMMABLE GASES Periodic Tests and Inspections § 38.25-10 Safety relief valves—TB/ALL. (a) The cargo tank safety relief valves shall...

46 CFR 38.25-10 - Safety relief valves-TB/ALL.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Safety relief valves-TB/ALL. 38.25-10 Section 38.25-10 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY TANK VESSELS LIQUEFIED FLAMMABLE GASES Periodic Tests and Inspections § 38.25-10 Safety relief valves—TB/ALL. (a) The cargo tank safety relief valves shall...

46 CFR 105.10-20 - Pressure vacuum relief valve.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in enclosed... 46 Shipping 4 2011-10-01 2011-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10...

49 CFR 178.347-4 - Pressure relief.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Pressure relief. 178.347-4 Section 178.347-4... Containers for Motor Vehicle Transportation § 178.347-4 Pressure relief. (a) Each cargo tank must be equipped with a pressure and vacuum relief system in accordance with § 178.345-10 and this section. (b) Type and...

49 CFR 179.500-16 - Tests of pressure relief devices.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Tests of pressure relief devices. 179.500-16... CARS Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-16 Tests of pressure relief devices. (a) Pressure relief valves shall be tested by air...

49 CFR 178.347-4 - Pressure relief.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 3 2013-10-01 2013-10-01 false Pressure relief. 178.347-4 Section 178.347-4... Containers for Motor Vehicle Transportation § 178.347-4 Pressure relief. (a) Each cargo tank must be equipped with a pressure and vacuum relief system in accordance with § 178.345-10 and this section. (b) Type and...

46 CFR 105.10-20 - Pressure vacuum relief valve.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in enclosed... 46 Shipping 4 2010-10-01 2010-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10...

49 CFR 179.500-16 - Tests of pressure relief devices.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Tests of pressure relief devices. 179.500-16... CARS Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-16 Tests of pressure relief devices. (a) Pressure relief valves shall be tested by air...

40 CFR 264.1058 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2014 CFR

2014-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other... heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. (a) Pumps and valves in heavy liquid service, pressure relief devices in light liquid...

46 CFR 105.10-20 - Pressure vacuum relief valve.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in enclosed... 46 Shipping 4 2014-10-01 2014-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10...

40 CFR 265.1058 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2011 CFR

2011-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other... and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. (a) Pumps and valves in heavy liquid service, pressure relief...

40 CFR 61.242-8 - Standards: Pressure relief services in liquid service and connectors.

Code of Federal Regulations, 2012 CFR

2012-07-01

...: Pressure relief services in liquid service and connectors. (a) If evidence of a potential leak is found by visual, audible, olfactory, or any other detection method at pressure relief devices in liquid service... 40 Protection of Environment 9 2012-07-01 2012-07-01 false Standards: Pressure relief services in...

49 CFR 178.347-4 - Pressure relief.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Pressure relief. 178.347-4 Section 178.347-4... Containers for Motor Vehicle Transportation § 178.347-4 Pressure relief. (a) Each cargo tank must be equipped with a pressure and vacuum relief system in accordance with § 178.345-10 and this section. (b) Type and...

40 CFR 265.1058 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2012 CFR

2012-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other... and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. (a) Pumps and valves in heavy liquid service, pressure relief...

40 CFR 61.242-8 - Standards: Pressure relief services in liquid service and connectors.

Code of Federal Regulations, 2014 CFR

2014-07-01

...: Pressure relief services in liquid service and connectors. (a) If evidence of a potential leak is found by visual, audible, olfactory, or any other detection method at pressure relief devices in liquid service... 40 Protection of Environment 9 2014-07-01 2014-07-01 false Standards: Pressure relief services in...

40 CFR 265.1058 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2013 CFR

2013-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other... and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. (a) Pumps and valves in heavy liquid service, pressure relief...

46 CFR 105.10-20 - Pressure vacuum relief valve.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in enclosed... 46 Shipping 4 2012-10-01 2012-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10...

40 CFR 61.242-8 - Standards: Pressure relief services in liquid service and connectors.

Code of Federal Regulations, 2010 CFR

2010-07-01

...: Pressure relief services in liquid service and connectors. (a) If evidence of a potential leak is found by visual, audible, olfactory, or any other detection method at pressure relief devices in liquid service... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standards: Pressure relief services in...

40 CFR 264.1058 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2011 CFR

2011-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other... heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. (a) Pumps and valves in heavy liquid service, pressure relief devices in light liquid...

49 CFR 178.347-4 - Pressure relief.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 3 2011-10-01 2011-10-01 false Pressure relief. 178.347-4 Section 178.347-4... Containers for Motor Vehicle Transportation § 178.347-4 Pressure relief. (a) Each cargo tank must be equipped with a pressure and vacuum relief system in accordance with § 178.345-10 and this section. (b) Type and...

40 CFR 61.242-8 - Standards: Pressure relief services in liquid service and connectors.

Code of Federal Regulations, 2011 CFR

2011-07-01

...: Pressure relief services in liquid service and connectors. (a) If evidence of a potential leak is found by visual, audible, olfactory, or any other detection method at pressure relief devices in liquid service... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Standards: Pressure relief services in...

40 CFR 264.1058 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2012 CFR

2012-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other... heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. (a) Pumps and valves in heavy liquid service, pressure relief devices in light liquid...

40 CFR 265.1058 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2014 CFR

2014-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other... and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. (a) Pumps and valves in heavy liquid service, pressure relief...

40 CFR 264.1058 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2013 CFR

2013-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other... heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. (a) Pumps and valves in heavy liquid service, pressure relief devices in light liquid...

49 CFR 179.500-16 - Tests of pressure relief devices.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 3 2012-10-01 2012-10-01 false Tests of pressure relief devices. 179.500-16... CARS Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-16 Tests of pressure relief devices. (a) Pressure relief valves shall be tested by air...

40 CFR 61.242-8 - Standards: Pressure relief services in liquid service and connectors.

Code of Federal Regulations, 2013 CFR

2013-07-01

...: Pressure relief services in liquid service and connectors. (a) If evidence of a potential leak is found by visual, audible, olfactory, or any other detection method at pressure relief devices in liquid service... 40 Protection of Environment 9 2013-07-01 2013-07-01 false Standards: Pressure relief services in...

49 CFR 179.500-16 - Tests of pressure relief devices.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 3 2014-10-01 2014-10-01 false Tests of pressure relief devices. 179.500-16... CARS Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A) § 179.500-16 Tests of pressure relief devices. (a) Pressure relief valves shall be tested by air...

46 CFR 105.10-20 - Pressure vacuum relief valve.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Pressure vacuum relief valve. (a) The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of pressure or vacuum in enclosed... 46 Shipping 4 2013-10-01 2013-10-01 false Pressure vacuum relief valve. 105.10-20 Section 105.10...

30 CFR 203.85 - What is in an economic viability and relief justification report?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 2 2012-07-01 2012-07-01 false What is in an economic viability and relief... Sulfur General § 203.85 What is in an economic viability and relief justification report? This report... economic viability and relief justification report must contain the following items for an oil and gas...

30 CFR 203.85 - What is in an economic viability and relief justification report?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What is in an economic viability and relief... Oil, Gas, and Sulfur General Required Reports § 203.85 What is in an economic viability and relief... your own model and results. The economic viability and relief justification report must contain the...

30 CFR 203.85 - What is in an economic viability and relief justification report?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 2 2013-07-01 2013-07-01 false What is in an economic viability and relief... Sulfur General § 203.85 What is in an economic viability and relief justification report? This report... economic viability and relief justification report must contain the following items for an oil and gas...

30 CFR 203.85 - What is in an economic viability and relief justification report?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 2 2014-07-01 2014-07-01 false What is in an economic viability and relief... Sulfur General § 203.85 What is in an economic viability and relief justification report? This report... economic viability and relief justification report must contain the following items for an oil and gas...

30 CFR 203.85 - What is in an economic viability and relief justification report?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What is in an economic viability and relief... Required Reports § 203.85 What is in an economic viability and relief justification report? This report... economic viability and relief justification report must contain the following items for an oil and gas...

30 CFR 204.207 - Who will approve, deny, or modify my request for accounting and auditing relief?

Code of Federal Regulations, 2010 CFR

2010-07-01

... for accounting and auditing relief? 204.207 Section 204.207 Mineral Resources MINERALS MANAGEMENT... Accounting and Auditing Relief § 204.207 Who will approve, deny, or modify my request for accounting and auditing relief? (a) If there is not a State concerned for your marginal property, only MMS will decide...

75 FR 1654 - States' Decisions on Participating in Accounting and Auditing Relief for Federal Oil and Gas...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-12

...' Decisions on Participating in Accounting and Auditing Relief for Federal Oil and Gas Marginal Properties... participate in accounting and auditing relief for Federal oil and gas marginal properties located within the... the Code of Federal Regulations (CFR), to provide two types of accounting and auditing relief for...

76 FR 6819 - States' Decisions on Participating in Accounting and Auditing Relief for Federal Oil and Gas...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-08

...' Decisions on Participating in Accounting and Auditing Relief for Federal Oil and Gas Marginal Properties... or not participate in accounting and auditing relief for Federal oil and gas marginal properties... September 13, 2004 (69 FR 55076), provide two types of accounting and auditing relief for Federal onshore or...

Fluid relief and check valve

DOEpatents

Blaedel, K.L.; Lord, S.C.; Murray, I.

1986-07-17

A passive fluid pressure relief and check valve allows the relief pressure to be slaved to a reference pressure independently of the exhaust pressure. The pressure relief valve is embodied by a submerged vent line in a sealing fluid, the relief pressure being a function of the submerged depth. A check valve is embodied by a vertical column of fluid (the maximum back pressure being a function of the height of the column of fluid). The pressure is vented into an exhaust system which keeps the exhaust out of the area providing the reference pressure.

Large tubular colonic duplication in an adult treated with a small midline incision

PubMed Central

Yong, Yuen Geng; Jung, Kyung Uk; Cho, Yong Beom; Yun, Seong Hyeon; Kim, Hee Cheol; Lee, Woo Yong

2012-01-01

Tubular colonic duplication presenting in adults is rare and difficult to diagnose preoperatively. Only a few cases have been reported in the literature. We report a case of a 29-year-old lady presenting with a long history of chronic constipation, abdominal mass and repeated episodes of abdominal pain. The abdominal-pelvic computed tomography scan showed segmental bowel wall thickening thought to be small bowel, and dilatation with stasis of intraluminal content. The provisional diagnosis was small bowel duplication. She was scheduled for single port laparoscopic resection. However, a T-shaped tubular colonic duplication at sigmoid colon was found intraoperatively. Resection of the large T-shaped tubular colonic duplication containing multiple impacted large fecaloma and primary anastomosis was performed. There was no perioperative complication. We report, herein, the case of a T-shaped tubular colonic duplication at sigmoid colon in an adult who was successfully treated through mini-laparotomy assisted by single port laparoscopic surgery. PMID:22403754

Evaluation of Shape and Textural Features from CT as Prognostic Biomarkers in Non-small Cell Lung Cancer.

PubMed

Bianconi, Francesco; Fravolini, Mario Luca; Bello-Cerezo, Raquel; Minestrini, Matteo; Scialpi, Michele; Palumbo, Barbara

2018-04-01

We retrospectively investigated the prognostic potential (correlation with overall survival) of 9 shape and 21 textural features from non-contrast-enhanced computed tomography (CT) in patients with non-small-cell lung cancer. We considered a public dataset of 203 individuals with inoperable, histologically- or cytologically-confirmed NSCLC. Three-dimensional shape and textural features from CT were computed using proprietary code and their prognostic potential evaluated through four different statistical protocols. Volume and grey-level run length matrix (GLRLM) run length non-uniformity were the only two features to pass all four protocols. Both features correlated negatively with overall survival. The results also showed a strong dependence on the evaluation protocol used. Tumour volume and GLRLM run-length non-uniformity from CT were the best predictor of survival in patients with non-small-cell lung cancer. We did not find enough evidence to claim a relationship with survival for the other features. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

A Small U-Shaped Bending-Induced Interference Optical Fiber Sensor for the Measurement of Glucose Solutions.

PubMed

Fang, Yu-Lin; Wang, Chen-Tung; Chiang, Chia-Chin

2016-09-09

The study proposes a small U-shaped bending-induced interference optical fiber sensor; this novel sensor is a probe-type sensor manufactured using a mechanical device, a heat source, optical fiber and a packaging module. This probe-type sensor overcomes the shortcomings of conventional optical fibers, including being difficult to repair and a tendency to be influenced by external forces. We manufactured three types of sensors with different curvature radiuses. Specifically, sensors with three radiuses (1.5 mm, 2.0 mm, and 3.0 mm) were used to measure common water and glucose solutions with concentrations of between 6% and 30% (the interval between concentrations was 4%). The results show that the maximal sensitivity was 0.85 dB/% and that the linearly-dependent coefficient was 0.925. The results further show that not only can the small U-shaped bending-induced interference optical fiber sensor achieve high sensitivity in the measurement of glucose solutions, but that it can also achieve great stability and repeatability.

Detecting tents to estimate the displaced populations for post-disaster relief using high resolution satellite imagery

NASA Astrophysics Data System (ADS)

Wang, Shifeng; So, Emily; Smith, Pete

2015-04-01

Estimating the number of refugees and internally displaced persons is important for planning and managing an efficient relief operation following disasters and conflicts. Accurate estimates of refugee numbers can be inferred from the number of tents. Extracting tents from high-resolution satellite imagery has recently been suggested. However, it is still a significant challenge to extract tents automatically and reliably from remote sensing imagery. This paper describes a novel automated method, which is based on mathematical morphology, to generate a camp map to estimate the refugee numbers by counting tents on the camp map. The method is especially useful in detecting objects with a clear shape, size, and significant spectral contrast with their surroundings. Results for two study sites with different satellite sensors and different spatial resolutions demonstrate that the method achieves good performance in detecting tents. The overall accuracy can be up to 81% in this study. Further improvements should be possible if over-identified isolated single pixel objects can be filtered. The performance of the method is impacted by spectral characteristics of satellite sensors and image scenes, such as the extent of area of interest and the spatial arrangement of tents. It is expected that the image scene would have a much higher influence on the performance of the method than the sensor characteristics.

Longitudinal study of skin aging: from microrelief to wrinkles.

PubMed

Bazin, Roland; Lévêque, Jean Luc

2011-05-01

To study the changes in skin microrelief and periocular wrinkles during the aging process. Replicas of the crow's feet area of volunteers were recorded in 1987 and 2008 and observed comparatively. Characteristic features were quantified by image analysis. Observation shows that some microrelief features disappear and even merge with wrinkles that become more marked. Some primary lines also tend to merge to form thin new wrinkles. Quantitative data support these observations: the size of small and medium objects of skin relief decreases with age while large objects are becoming larger. Over 21 years, in the group studied, the total area of the detected objects remains quite constant. Only the distribution between small and large detected objects (microrelief features and wrinkles, respectively) is modified. © 2011 John Wiley & Sons A/S.

Microgravity

NASA Image and Video Library

2004-04-15

The loss of productivity due to flu is staggering. Costs range as much as $20 billio a year. High mutation rates of the flu virus have hindered development of new drugs or vaccines. The secret lies in a small molecule which is attached to the host cell's surface. Each flu virus, no matter what strain, must remove this small molecule to escape the host cell to spread infection. Using data from space and earth grown crystals, researchers from the Center of Macromolecular Crystallography (CMC) are desining drugs to bind with this protein's active site. This lock and key fit reduces the spread of flu in the body by blocking its escape route. In collaboration with its corporate partner, the CMC has refined drug structure in preparation for clinical trials. Tested and approved relief is expected to reach drugstores by year 2004.

Minimum magnetic curvature for resilient divertors using Compact Toroidal Hybrid geometry

DOE PAGES

Bader, Aaron; Hegna, C. C.; Cianciosa, Mark R.; ...

2018-03-16

The properties of resilient divertors are explored using equilibria derived from Compact Toroidal Hybrid (CTH) geometries. Resilience is defined here as the robustness of the strike point patterns as the plasma geometry and/or plasma profiles are changed. The addition of plasma current in the CTH configurations significantly alters the shape of the last closed flux surface and the rotational transform profile, however, it does not alter the strike point pattern on the target plates, and hence has resilient divertor features. The limits of when a configuration transforms to a resilient configuration is then explored. New CTH-like configurations are generated thatmore » vary from a perfectly circular cross section to configurations with increasing amounts of toroidal shaping. It is found that even small amounts of toroidal shaping lead to strike point localization that is similar to the standard CTH configuration. Lastly, these results show that only a small degree of three-dimensional shaping is necessary to produce a resilient divertor, implying that any highly shaped optimized stellarator will possess the resilient divertor property.« less

Singular growth shapes in turbulent field theories

NASA Astrophysics Data System (ADS)

Conrado, Claudine V.; Bohr, Tomas

1994-05-01

In this work we study deterministic, turbulent partial differential equations (the Kuramoto-Sivashinsky equation and generalizations) with initial conditions which are nonzero only in a small region. We demonstrate that the asymptotic state has a well-defined growth shape, which can be determined by the combination of nonlinear growth velocities, and front propagation governed by the linear instabilities. We show that the growth shapes are, in general, singular and that a new type of instability occurs when the growth shape becomes discontinuous.

Efficiency of Hysteresis Rods in Small Spacecraft Attitude Stabilization

PubMed Central

Farrahi, Assal; Sanz-Andrés, Ángel

2013-01-01

A semiempirical method for predicting the damping efficiency of hysteresis rods on-board small satellites is presented. It is based on the evaluation of dissipating energy variation of different ferromagnetic materials for two different rod shapes: thin film and circular cross-section rods, as a function of their elongation. Based on this formulation, an optimum design considering the size of hysteresis rods, their cross section shape, and layout has been proposed. Finally, the formulation developed was applied to the case of four existing small satellites, whose corresponding in-flight data are published. A good agreement between the estimated rotational speed decay time and the in-flight data has been observed. PMID:24501579

Adolescent accessory navicular.

PubMed

Leonard, Zachary C; Fortin, Paul T

2010-06-01

Accessory tarsal navicular is a common anomaly in the human foot. It should be in the differential of medial foot pain. A proper history and physical, along with imaging modalities, can lead to the diagnosis. Often, classification of the ossicle and amount of morbidity guide treatment. Nonsurgical measures can provide relief. A variety of surgical procedures have been used with good results. Our preferred method is excision for small ossicles and segmental fusion after removal of the synchondrosis for large ossicles. In addition, pes planovalgus deformities need to be addressed concomitantly. Copyright 2010 Elsevier Inc. All rights reserved.

Fine-Branched Ridges

NASA Image and Video Library

2015-10-14

This image from NASA Mars Reconnaissance Orbiter spacecraft shows numerous branching ridges with various degrees of sinuosity. These branching forms resemble tributaries funneling and draining into larger channel trunks towards the upper portion of the scene. The raised relief of these branching ridges suggests that these are ancient channels are inverted due to lithification and cementation of the riverbed sediment, which made it more resistant to erosion than the surrounding material. Wind-blown bedforms are abundant and resemble small ridges that are aligned in an approximately north-south direction. http://photojournal.jpl.nasa.gov/catalog/PIA20006

USGS maps

USGS Publications Warehouse

,

2005-01-01

Discover a small sample of the millions of maps produced by the U.S. Geological Survey (USGS) in its mission to map the Nation and survey its resources. This booklet gives a brief overview of the types of maps sold and distributed by the USGS through its Earth Science Information Centers (ESIC) and also available from business partners located in most States. The USGS provides a wide variety of maps, from topographic maps showing the geographic relief and thematic maps displaying the geology and water resources of the United States, to special studies of the moon and planets.

A diamond in the sky: an exclusion or normal situation?

NASA Astrophysics Data System (ADS)

Kochemasov, G. G.

2009-04-01

A diamond in the sky: an exclusion or normal situation? G. Kochemasov IGEM of the Russian Academy of Sciences, Moscow, Russia, kochem.36@mail.ru The September 2008 observation and imaging by the ESA-"Rosetta" spacecraft of the small asteroid (2867) Steins should have a rather deep impact at planetological thinking. The planetology community is accustomed to think that the only process making forms of small bodies is the impact (accretion) process. No other forces are considered as though there is none. But actually there is one mighty process - a wave process that affects all cosmic bodies by warping them in several (normally four) directions. An origin of these warping waves is quite simple. All cosmic bodies move (orbit) and rotate. After I. Kepler we know that all orbits are non-round but elliptical (time rounds them but ellipticity always remain), and this means that orbiting bodies periodically cyclically change their accelerations (speeding up and slowing down). Multiplied by masses these changes produce forces applied to the bodies and causing oscillations of their spheres. In rotating bodies (but all bodies rotate!) these oscillations are decomposed (split) into four orthogonal and diagonal directions. Interfering of these directions produces uplifting, subsiding and neutral tectonic blocks which are observed on any celestial body more or less clearly. The blocks dimensions depend on lengths of warping waves that acquire a stationary character in closed spheres. That is why celestial spheres are not like billiards-balls but consist of regularly placed depressions (lowlands) and highlands. The longest fundamental wave 1 produces ubiquitous tectonic dichotomy - an opposition of subsided and bulged hemispheres (segments). The Plato's tetrahedron is a structural expression of this configuration: in this simplest polyhedron there is an opposition of a vertex (bulging, extension) and a face (pressing in, contraction). A convexo-concave shape of small bodies is very typical [1]; in some viewpoints they look as tetrahedrons [2]. The first overtone of the fundamental wave - wave 2 - produces structural octahedron (diamond). Rarely in a full shape, more often in its parts {rectilinear crossing outlines) this shape is rather typical in many obtained images of small bodies [3]. Not perfection of this polyhedron in reality is due to its superposition on a tetrahedron structure and complication by wave structures of the lower ranges, like a cube, dodecahedron, and impacts. Still, in some cases "diamond" in the sky is rather clear - Yanus (PIA 06613), Steins. Dr. Schwehm's prediction of even larger asteroid "diamond' in shape of Lutetia is really significant [4]. If small bodies are able to demonstrate their natural polyhedron shapes due to negligible gravity, the larger bodies are reduced to a globe shape by a mighty gravity. Still their structural layout (ubiquitous dichotomy), some protruding vertices, edges and faces betray their polyhedron nature. In this relation, "mysterious" Saturn's northern hexagon is a reflection of three crossing tetrahedron faces making the fourth face, while the southern hurricane is an imprint of an opposite vertex. Thus looks a hidden polyhedron in a globe. ESA-Rosetta mission is a real clue to an adequate understanding, deciphering forces sculpturing celestial bodies. Images of asteroid Steins revealing its clear polyhedron (diamond) shape witness to an involvement of warping wave processes. References: [1] Kochemasov G.G. (1999) On convexo-concave shape of small celestial bodies // "Asteroids, Comets, Meteors" conference, Cornell Univ., U.S.A., July 1999, Abstract # 24. 22; [2] Kochemasov G.G. (2008) Plato' polyhedra as shapes of small icy satellites // Geophys. Res. Abstracts, Vol. 10, EGU2008-A-01271, CD-ROM ; [3] Kochemasov G.G. (1999) "Diamond" and "dumb-bells"-like shapes of celestial bodies induced by inertia-gravity waves // 30th Vernadsky-Brown microsymposium on comparative planetology, Abstracts, Moscow, Vernadsky Inst.,, 49-50; [4] ESA News. Steins: a diamond in the sky, 6 September, 2008 (http://www.esa.int/rosetta);

The effect of ice crystal shape on aircraft contrails

NASA Astrophysics Data System (ADS)

Meza Castillo, Omar E.

Aircraft contrails are a common phenomenon observed in the sky. They are formed mainly of water, from the ambient atmosphere and as a by-product of the combustion process, in the form of ice crystals. They have been identified as a potential contributor to global warming. Some contrails can be long-lived and create man-made cloud cover, thus possibly altering the radiative balance of the earth. There has been a great deal of research on various aspects of contrail development, but to date, little has been done on the influence of ice crystal shapes on the contrail evolution. In-situ studies have reported that young contrails are mainly quasi-spherical crystals while older contrails can have a much more diverse spectrum of possible shapes. The most common shapes found in contrails are quasi-spherical, hexagonal columns, hexagonal plates, and bullet rosettes. Numerical simulations of contrails to date typically have assumed "spherical" as the default ice shape. This work simulated contrail development with a large eddy simulation (LES) model that implemented both spherical and non-spherical shapes to examine the effects. The included shape effect parameters, such as capacitance coefficient, ventilation factor, Kelvin effect, fall velocity and ice crystal surface area, help to establish the shape difference in the results. This study also investigated initial sensitivities to an additional ice parameter, the ice deposition coefficient. The literature shows conflicting values for this coefficient over a wide range. In the course of this investigation a comparison of various ice metrics was made for simulations with different assumed crystal shapes (spheres, hexagonal columns, hexagonal plates, bullet rosettes and combination of shapes). The simulations were performed at early and late contrail time, with a range of ice crystal sizes, and with/without coupled radiation. In young and older contrails and without coupled radiation, the difference from the shape effect in ice crystal number, N(t), is not significant compared with the level of uncertainty. In young contrails, the difference between spherical and non-spherical shapes in N(t) is less than 7% for relatively large ice particles and 23% for relatively small ice particles. The ice mass, M(t), is not significantly affected by the crystal shapes, with less than 8% difference. However, the ice surface area, S(t), is the ice metric more sensitive to crystal shape, with a maximum difference of 68%. It increases at late time, though it is mainly governed by geometrical rather than dynamical effects. The small sensitivity to shape effects in the ice contrail metrics when radiation is not included suggests that the spherical shape will provide a reasonable representation for all shapes found in the in-situ studies. The radiation is included at late time, when the lasting effects of contrails are more critical. The inclusion of coupled radiation increases the level of dispersion in the results and hence increases slightly the differences due to shape effects. The small difference is also observed in the infrared heating rates of contrails.

Shape-Based Virtual Screening with Volumetric Aligned Molecular Shapes

PubMed Central

Koes, David Ryan; Camacho, Carlos J.

2014-01-01

Shape-based virtual screening is an established and effective method for identifying small molecules that are similar in shape and function to a reference ligand. We describe a new method of shape-based virtual screening, volumetric aligned molecular shapes (VAMS). VAMS uses efficient data structures to encode and search molecular shapes. We demonstrate that VAMS is an effective method for shape-based virtual screening and that it can be successfully used as a pre-filter to accelerate more computationally demanding search algorithms. Unique to VAMS is a novel minimum/maximum shape constraint query for precisely specifying the desired molecular shape. Shape constraint searches in VAMS are particularly efficient and millions of shapes can be searched in a fraction of a second. We compare the performance of VAMS with two other shape-based virtual screening algorithms a benchmark of 102 protein targets consisting of more than 32 million molecular shapes and find that VAMS provides a competitive trade-off between run-time performance and virtual screening performance. PMID:25049193

Exploring the Association of Deliberate Self-Harm With Emotional Relief Using a Novel Implicit Association Test

PubMed Central

Gratz, Kim L.; Chapman, Alexander L.; Dixon-Gordon, Katherine L.; Tull, Matthew T.

2017-01-01

Despite the growing consensus that negative reinforcement in the form of emotional relief plays a key role in the maintenance of deliberate self-harm (DSH), most of the research in this area has relied exclusively on self-report measures of the perceived motives for and emotional consequences of DSH. Thus, the primary aim of this study was to extend extant research on the role of emotional relief in DSH by examining the strength of the association of DSH with emotional relief using a novel version of the Implicit Association Test (IAT). The strength of the DSH-relief association among both participants with (vs. without) DSH and self-harming participants with (vs. without) BPD, as well as its associations with relevant clinical constructs (including DSH characteristics, self-reported motives for DSH, BPD pathology, and emotion dysregulation and avoidance) were examined in a community sample of young adults (113 with recent recurrent DSH; 135 without DSH). As hypothesized, results revealed stronger associations between DSH and relief among participants with versus without DSH, as well as among DSH participants with versus without BPD. Moreover, the strength of the DSH-relief association was positively associated with DSH frequency and versatility (both lifetime and at 6-month follow-up), BPD pathology, emotion dysregulation, experiential avoidance, and self-reported emotion relief motives for DSH. Findings provide support for theories emphasizing the role of emotional relief in DSH (particularly among individuals with BPD), as well as the construct validity, predictive utility, and incremental validity (relative to self-reported emotion relief motives) of this IAT. PMID:26147069

Predictors of early dyspnoea relief in acute heart failure and the association with 30-day outcomes: findings from ASCEND-HF

PubMed Central

Mentz, Robert J.; Hernandez, Adrian F.; Stebbins, Amanda; Ezekowitz, Justin A.; Felker, G. Michael; Heizer, Gretchen M.; Atar, Dan; Teerlink, John R.; Califf, Robert M.; Massie, Barry M.; Hasselblad, Vic; Starling, Randall C.; O'Connor, Christopher M.; Ponikowski, Piotr

2013-01-01

Aims To examine the characteristics associated with early dyspnoea relief during acute heart failure (HF) hospitalization, and its association with 30-day outcomes. Methods and results ASCEND-HF was a randomized trial of nesiritide vs. placebo in 7141 patients hospitalized with acute HF in which dyspnoea relief at 6 h was measured on a 7-point Likert scale. Patients were classified as having early dyspnoea relief if they experienced moderate or marked dyspnoea improvement at 6 h. We analysed the clinical characteristics, geographical variation, and outcomes (mortality, mortality/HF hospitalization, and mortality/hospitalization at 30 days) associated with early dyspnoea relief. Early dyspnoea relief occurred in 2984 patients (43%). In multivariable analyses, predictors of dyspnoea relief included older age and oedema on chest radiograph; higher systolic blood pressure, respiratory rate, and natriuretic peptide level; and lower serum blood urea nitrogen (BUN), sodium, and haemoglobin (model mean C index = 0.590). Dyspnoea relief varied markedly across countries, with patients enrolled from Central Europe having the lowest risk-adjusted likelihood of improvement. Early dyspnoea relief was associated with lower risk-adjusted 30-day mortality/HF hospitalization [hazard ratio (HR) 0.81; 95% confidence interval (CI) 0.68–0.96] and mortality/hospitalization (HR 0.85; 95% CI 0.74–0.99), but similar mortality. Conclusion Clinical characteristics such as respiratory rate, pulmonary oedema, renal function, and natriuretic peptide levels are associated with early dyspnoea relief, and moderate or marked improvement in dyspnoea was associated with a lower risk for 30-day outcomes. PMID:23159547

Evaluation of the correctness of the feed selection based on the analysis of chip's shape

NASA Astrophysics Data System (ADS)

Chodor, Jaroslaw; Kukielka, Leon; Kaldunski, Pawel; Bohdal, Lukasz; Patyk, Radoslaw; Kulakowska, Agnieszka

2018-05-01

For the experiment needs, the own experiment plan was developed. The researches were carried out to determine the effect of variable, small feed on the chip's shape. To provide orthogonal free cutting special specimens were prepared. Obtained chips were divided according to shapes and also scanned using a scanning electron microscope (SEM). Conclusions from the experiments were given.

Rebounding of a shaped-charge jet

NASA Astrophysics Data System (ADS)

Proskuryakov, E. V.; Sorokin, M. V.; Fomin, V. M.

2007-09-01

The phenomenon of rebounding of a shaped-charge jet from the armour surface with small angles between the jet axis and the target surface is considered. Rebounding angles as a function of jet velocity are obtained in experiments for a copper shaped-charge jet. An engineering calculation technique is developed. The results calculated with the use of this technique are in reasonable agreement with experimental data.

46 CFR 38.10-15 - Safety relief valves-TB/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Safety relief valves-TB/ALL. 38.10-15 Section 38.10-15..., Fittings, and Accessory Equipment § 38.10-15 Safety relief valves—TB/ALL. (a) Each tank shall be fitted with or (subject to approval by the Commandant) connected to one or more safety relief valves designed...

7 CFR 718.307 - Special relief approval authority for State Executive Directors.

Code of Federal Regulations, 2010 CFR

2010-01-01

... $20,000 (including in that calculation, any loan amount or other benefit of any kind payable for that...; (4) The total amount of loans, payments, and benefits of any kind for which relief is provided to... relief to the party who will receive the benefit of such relief and only if, in that document, the SED...

Effectiveness of Property Tax Relief in Oregon.

ERIC Educational Resources Information Center

Hartman, William T.; Hwang, C. S.

This study examines the effects of the 1979 Oregon Property Tax Relief Plan on 1980-81 school district budget decisions by comparing the available tax relief, the school expenditures, and the tax levies in the state for the years 1975-81. The history of direct and indirect property tax relief in Oregon is sketched for the years prior to 1979; the…

46 CFR 30.10-55 - Pressure vacuum relief valve-TB/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Pressure vacuum relief valve-TB/ALL. 30.10-55 Section 30... Definitions § 30.10-55 Pressure vacuum relief valve—TB/ALL. The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of...

40 CFR 60.482-8a - Standards: Pumps, valves, and connectors in heavy liquid service and pressure relief devices in...

Code of Federal Regulations, 2012 CFR

2012-07-01

... connectors in heavy liquid service and pressure relief devices in light liquid or heavy liquid service. 60... connectors in heavy liquid service and pressure relief devices in light liquid or heavy liquid service. (a... at pumps, valves, and connectors in heavy liquid service and pressure relief devices in light liquid...

46 CFR 30.10-55 - Pressure vacuum relief valve-TB/ALL.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Pressure vacuum relief valve-TB/ALL. 30.10-55 Section 30... Definitions § 30.10-55 Pressure vacuum relief valve—TB/ALL. The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of...

40 CFR 60.482-8a - Standards: Pumps, valves, and connectors in heavy liquid service and pressure relief devices in...

Code of Federal Regulations, 2013 CFR

2013-07-01

... connectors in heavy liquid service and pressure relief devices in light liquid or heavy liquid service. 60... connectors in heavy liquid service and pressure relief devices in light liquid or heavy liquid service. (a... at pumps, valves, and connectors in heavy liquid service and pressure relief devices in light liquid...

46 CFR 30.10-55 - Pressure vacuum relief valve-TB/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Pressure vacuum relief valve-TB/ALL. 30.10-55 Section 30... Definitions § 30.10-55 Pressure vacuum relief valve—TB/ALL. The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of...

40 CFR 60.482-8 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2014 CFR

2014-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and connectors. 60.482-8... Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid... any other detection method at pumps and valves in heavy liquid service, pressure relief devices in...

40 CFR 60.482-8 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2013 CFR

2013-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and connectors. 60.482-8... Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid... any other detection method at pumps and valves in heavy liquid service, pressure relief devices in...

46 CFR 30.10-55 - Pressure vacuum relief valve-TB/ALL.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Pressure vacuum relief valve-TB/ALL. 30.10-55 Section 30... Definitions § 30.10-55 Pressure vacuum relief valve—TB/ALL. The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of...

40 CFR 60.482-8a - Standards: Pumps, valves, and connectors in heavy liquid service and pressure relief devices in...

Code of Federal Regulations, 2011 CFR

2011-07-01

... connectors in heavy liquid service and pressure relief devices in light liquid or heavy liquid service. 60... connectors in heavy liquid service and pressure relief devices in light liquid or heavy liquid service. (a... at pumps, valves, and connectors in heavy liquid service and pressure relief devices in light liquid...

40 CFR 60.482-8 - Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or...

Code of Federal Regulations, 2012 CFR

2012-07-01

... liquid service, pressure relief devices in light liquid or heavy liquid service, and connectors. 60.482-8... Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid... any other detection method at pumps and valves in heavy liquid service, pressure relief devices in...

40 CFR 60.482-8a - Standards: Pumps, valves, and connectors in heavy liquid service and pressure relief devices in...

Code of Federal Regulations, 2014 CFR

2014-07-01

... connectors in heavy liquid service and pressure relief devices in light liquid or heavy liquid service. 60... connectors in heavy liquid service and pressure relief devices in light liquid or heavy liquid service. (a... at pumps, valves, and connectors in heavy liquid service and pressure relief devices in light liquid...

46 CFR 30.10-55 - Pressure vacuum relief valve-TB/ALL.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Pressure vacuum relief valve-TB/ALL. 30.10-55 Section 30... Definitions § 30.10-55 Pressure vacuum relief valve—TB/ALL. The term pressure vacuum relief valve means any device or assembly of a mechanical, liquid, weight, or other type used for the automatic regulation of...